Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (21 commits)
  Blackfin Serial Driver: abstract away DLAB differences into header
  Blackfin Serial Driver: macro away the IER differences between processors
  [Blackfin] arch: remove useless IRQ_SW_INT defines
  [Blackfin] arch: protect linux/usb/musb.h include until the driver gets mainlined
  [Blackfin] arch: protect linux/usb/isp1362.h include until the driver gets mainlined
  [Blackfin] arch: add EBIU supporting for BF54x EZKIT SMSC LAN911x/LAN921x families embedded ethernet driver
  [Blackfin] arch: Set spi flash partition on bf527 as like bf548.
  [Blackfin] arch: fix bug - Remove module will not free L1 memory used
  [Blackfin] arch: fix wrong header name in comment
  [Blackfin] arch: Fix BUG - spi flash on bf527 ezkit would fail at mount
  [Blackfin] arch: add twi_lcd and twi_keypad i2c board info to bf527-ezkit
  [Blackfin] arch: Add physmap partition for BF527-EZkit
  [Blackfin] arch: fix gdb testing regression
  [Blackfin] arch: disable single stepping when delivering a signal
  [Blackfin] arch: Delete unused (copied from m68k) entries in asm-offsets.c.
  [Blackfin] arch: In the double fault handler, set up the PT_RETI slot
  [Blackfin] arch: Support for CPU_FREQ and NOHZ
  [Blackfin] arch: Functional power management support: Add CPU and platform voltage scaling support
  [Blackfin] arch: fix bug -  breaking the atomic sections code.
  [Blackfin] arch: Equalize include files: Add VR_CTL masks
  ...

39 files changed, 817 insertions, 229 deletions

diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 795d0ac67c2..fd5708523f2 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -832,6 +832,7 @@ config BANK_0
 config BANK_1
 	hex "Bank 1"
 	default 0x7BB0
+	default 0x5558 if BF54x
 
 config BANK_2
 	hex "Bank 2"
@@ -963,21 +964,22 @@ endchoice
 
 endmenu
 
-if (BF537 || BF533 || BF54x)
-
 menu "CPU Frequency scaling"
 
 source "drivers/cpufreq/Kconfig"
 
-config CPU_FREQ
-	bool
+config CPU_VOLTAGE
+	bool "CPU Voltage scaling"
+	depends on EXPERIMENTAL	
+	depends on CPU_FREQ
 	default n
 	help
-	  If you want to enable this option, you should select the
-	  DPMC driver from Character Devices.
-endmenu
+	  Say Y here if you want CPU voltage scaling according to the CPU frequency.
+	  This option violates the PLL BYPASS recommendation in the Blackfin Processor
+	  manuals. There is a theoretical risk that during VDDINT transitions 
+	  the PLL may unlock.
 
-endif
+endmenu
 
 source "net/Kconfig"
 
diff --git a/arch/blackfin/kernel/asm-offsets.c b/arch/blackfin/kernel/asm-offsets.c
index 721f15f3ceb..881afe9082c 100644
--- a/arch/blackfin/kernel/asm-offsets.c
+++ b/arch/blackfin/kernel/asm-offsets.c
@@ -56,9 +56,6 @@ int main(void)
 	/* offsets into the thread struct */
 	DEFINE(THREAD_KSP, offsetof(struct thread_struct, ksp));
 	DEFINE(THREAD_USP, offsetof(struct thread_struct, usp));
-	DEFINE(THREAD_SR, offsetof(struct thread_struct, seqstat));
-	DEFINE(PT_SR, offsetof(struct thread_struct, seqstat));
-	DEFINE(THREAD_ESP0, offsetof(struct thread_struct, esp0));
 	DEFINE(THREAD_PC, offsetof(struct thread_struct, pc));
 	DEFINE(KERNEL_STACK_SIZE, THREAD_SIZE);
 
diff --git a/arch/blackfin/kernel/fixed_code.S b/arch/blackfin/kernel/fixed_code.S
index 5ed47228a39..4b03ba02548 100644
--- a/arch/blackfin/kernel/fixed_code.S
+++ b/arch/blackfin/kernel/fixed_code.S
@@ -1,6 +1,6 @@
 /*
  * This file contains sequences of code that will be copied to a
- * fixed location, defined in <asm/atomic_seq.h>.  The interrupt
+ * fixed location, defined in <asm/fixed_code.h>.  The interrupt
  * handlers ensure that these sequences appear to be atomic when
  * executed from userspace.
  * These are aligned to 16 bytes, so that we have some space to replace
diff --git a/arch/blackfin/kernel/module.c b/arch/blackfin/kernel/module.c
index 8b9fe29d03f..14a42848f37 100644
--- a/arch/blackfin/kernel/module.c
+++ b/arch/blackfin/kernel/module.c
@@ -160,6 +160,13 @@ int
 module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
 			  char *secstrings, struct module *mod)
 {
+	/*
+	 * XXX: sechdrs are vmalloced in kernel/module.c
+	 * and would be vfreed just after module is loaded,
+	 * so we hack to keep the only information we needed
+	 * in mod->arch to correctly free L1 I/D sram later.
+	 * NOTE: this breaks the semantic of mod->arch structure.
+	 */
 	Elf_Shdr *s, *sechdrs_end = sechdrs + hdr->e_shnum;
 	void *dest = NULL;
 
@@ -167,8 +174,8 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
 		if ((strcmp(".l1.text", secstrings + s->sh_name) == 0) ||
 		    ((strcmp(".text", secstrings + s->sh_name) == 0) &&
 		     (hdr->e_flags & FLG_CODE_IN_L1) && (s->sh_size > 0))) {
-			mod->arch.text_l1 = s;
 			dest = l1_inst_sram_alloc(s->sh_size);
+			mod->arch.text_l1 = dest;
 			if (dest == NULL) {
 				printk(KERN_ERR
 				       "module %s: L1 instruction memory allocation failed\n",
@@ -182,8 +189,8 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
 		if ((strcmp(".l1.data", secstrings + s->sh_name) == 0) ||
 		    ((strcmp(".data", secstrings + s->sh_name) == 0) &&
 		     (hdr->e_flags & FLG_DATA_IN_L1) && (s->sh_size > 0))) {
-			mod->arch.data_a_l1 = s;
 			dest = l1_data_sram_alloc(s->sh_size);
+			mod->arch.data_a_l1 = dest;
 			if (dest == NULL) {
 				printk(KERN_ERR
 					"module %s: L1 data memory allocation failed\n",
@@ -197,8 +204,8 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
 		if (strcmp(".l1.bss", secstrings + s->sh_name) == 0 ||
 		    ((strcmp(".bss", secstrings + s->sh_name) == 0) &&
 		     (hdr->e_flags & FLG_DATA_IN_L1) && (s->sh_size > 0))) {
-			mod->arch.bss_a_l1 = s;
 			dest = l1_data_sram_alloc(s->sh_size);
+			mod->arch.bss_a_l1 = dest;
 			if (dest == NULL) {
 				printk(KERN_ERR
 					"module %s: L1 data memory allocation failed\n",
@@ -210,8 +217,8 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
 			s->sh_addr = (unsigned long)dest;
 		}
 		if (strcmp(".l1.data.B", secstrings + s->sh_name) == 0) {
-			mod->arch.data_b_l1 = s;
 			dest = l1_data_B_sram_alloc(s->sh_size);
+			mod->arch.data_b_l1 = dest;
 			if (dest == NULL) {
 				printk(KERN_ERR
 					"module %s: L1 data memory allocation failed\n",
@@ -223,8 +230,8 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
 			s->sh_addr = (unsigned long)dest;
 		}
 		if (strcmp(".l1.bss.B", secstrings + s->sh_name) == 0) {
-			mod->arch.bss_b_l1 = s;
 			dest = l1_data_B_sram_alloc(s->sh_size);
+			mod->arch.bss_b_l1 = dest;
 			if (dest == NULL) {
 				printk(KERN_ERR
 					"module %s: L1 data memory allocation failed\n",
@@ -416,14 +423,14 @@ module_finalize(const Elf_Ehdr * hdr,
 
 void module_arch_cleanup(struct module *mod)
 {
-	if ((mod->arch.text_l1) && (mod->arch.text_l1->sh_addr))
-		l1_inst_sram_free((void *)mod->arch.text_l1->sh_addr);
-	if ((mod->arch.data_a_l1) && (mod->arch.data_a_l1->sh_addr))
-		l1_data_sram_free((void *)mod->arch.data_a_l1->sh_addr);
-	if ((mod->arch.bss_a_l1) && (mod->arch.bss_a_l1->sh_addr))
-		l1_data_sram_free((void *)mod->arch.bss_a_l1->sh_addr);
-	if ((mod->arch.data_b_l1) && (mod->arch.data_b_l1->sh_addr))
-		l1_data_B_sram_free((void *)mod->arch.data_b_l1->sh_addr);
-	if ((mod->arch.bss_b_l1) && (mod->arch.bss_b_l1->sh_addr))
-		l1_data_B_sram_free((void *)mod->arch.bss_b_l1->sh_addr);
+	if (mod->arch.text_l1)
+		l1_inst_sram_free((void *)mod->arch.text_l1);
+	if (mod->arch.data_a_l1)
+		l1_data_sram_free((void *)mod->arch.data_a_l1);
+	if (mod->arch.bss_a_l1)
+		l1_data_sram_free((void *)mod->arch.bss_a_l1);
+	if (mod->arch.data_b_l1)
+		l1_data_B_sram_free((void *)mod->arch.data_b_l1);
+	if (mod->arch.bss_b_l1)
+		l1_data_B_sram_free((void *)mod->arch.bss_b_l1);
 }
diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c
index be9fdd00d7c..53c2cd25544 100644
--- a/arch/blackfin/kernel/process.c
+++ b/arch/blackfin/kernel/process.c
@@ -245,7 +245,7 @@ unsigned long get_wchan(struct task_struct *p)
 
 void finish_atomic_sections (struct pt_regs *regs)
 {
-	int __user *up0 = (int __user *)&regs->p0;
+	int __user *up0 = (int __user *)regs->p0;
 
 	if (regs->pc < ATOMIC_SEQS_START || regs->pc >= ATOMIC_SEQS_END)
 		return;
diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c
index b4f062c172c..f51ab088098 100644
--- a/arch/blackfin/kernel/ptrace.c
+++ b/arch/blackfin/kernel/ptrace.c
@@ -185,8 +185,8 @@ void ptrace_disable(struct task_struct *child)
 {
 	unsigned long tmp;
 	/* make sure the single step bit is not set. */
-	tmp = get_reg(child, PT_SR) & ~(TRACE_BITS << 16);
-	put_reg(child, PT_SR, tmp);
+	tmp = get_reg(child, PT_SYSCFG) & ~TRACE_BITS;
+	put_reg(child, PT_SYSCFG, tmp);
 }
 
 long arch_ptrace(struct task_struct *child, long request, long addr, long data)
diff --git a/arch/blackfin/kernel/signal.c b/arch/blackfin/kernel/signal.c
index cb9d883d493..dbc3bbf846b 100644
--- a/arch/blackfin/kernel/signal.c
+++ b/arch/blackfin/kernel/signal.c
@@ -42,6 +42,9 @@
 
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
 
+/* Location of the trace bit in SYSCFG. */
+#define TRACE_BITS 0x0001
+
 struct fdpic_func_descriptor {
 	unsigned long	text;
 	unsigned long	GOT;
@@ -225,6 +228,16 @@ setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t * info,
 	regs->r1 = (unsigned long)(&frame->info);
 	regs->r2 = (unsigned long)(&frame->uc);
 
+	/*
+	 * Clear the trace flag when entering the signal handler, but
+	 * notify any tracer that was single-stepping it. The tracer
+	 * may want to single-step inside the handler too.
+	 */
+	if (regs->syscfg & TRACE_BITS) {
+		regs->syscfg &= ~TRACE_BITS;
+		ptrace_notify(SIGTRAP);
+	}
+
 	return 0;
 
  give_sigsegv:
diff --git a/arch/blackfin/kernel/time-ts.c b/arch/blackfin/kernel/time-ts.c
index 4482c47c09e..e887efc86c2 100644
--- a/arch/blackfin/kernel/time-ts.c
+++ b/arch/blackfin/kernel/time-ts.c
@@ -60,7 +60,7 @@ static inline unsigned long long cycles_2_ns(cycle_t cyc)
 
 static cycle_t read_cycles(void)
 {
-	return get_cycles();
+	return __bfin_cycles_off + (get_cycles() << __bfin_cycles_mod);
 }
 
 unsigned long long sched_clock(void)
@@ -117,7 +117,7 @@ static void bfin_timer_set_mode(enum clock_event_mode mode,
 		break;
 	}
 	case CLOCK_EVT_MODE_ONESHOT:
-		bfin_write_TSCALE(0);
+		bfin_write_TSCALE(TIME_SCALE - 1);
 		bfin_write_TCOUNT(0);
 		bfin_write_TCNTL(TMPWR | TMREN);
 		CSYNC();
@@ -183,10 +183,14 @@ irqreturn_t timer_interrupt(int irq, void *dev_id)
 
 static int __init bfin_clockevent_init(void)
 {
+	unsigned long timer_clk;
+
+	timer_clk = get_cclk() / TIME_SCALE;
+
 	setup_irq(IRQ_CORETMR, &bfin_timer_irq);
 	bfin_timer_init();
 
-	clockevent_bfin.mult = div_sc(get_cclk(), NSEC_PER_SEC, clockevent_bfin.shift);
+	clockevent_bfin.mult = div_sc(timer_clk, NSEC_PER_SEC, clockevent_bfin.shift);
 	clockevent_bfin.max_delta_ns = clockevent_delta2ns(-1, &clockevent_bfin);
 	clockevent_bfin.min_delta_ns = clockevent_delta2ns(100, &clockevent_bfin);
 	clockevents_register_device(&clockevent_bfin);
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 583d53811f0..8aa49f80422 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -32,12 +32,14 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb/isp1362.h>
 #endif
 #include <linux/ata_platform.h>
+#include <linux/i2c.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/usb/sl811.h>
@@ -50,6 +52,7 @@
 #include <asm/reboot.h>
 #include <asm/nand.h>
 #include <asm/portmux.h>
+#include <asm/dpmc.h>
 #include <linux/spi/ad7877.h>
 
 /*
@@ -171,6 +174,46 @@ static struct platform_device bf52x_t350mcqb_device = {
 };
 #endif
 
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition ezkit_partitions[] = {
+	{
+		.name       = "Bootloader",
+		.size       = 0x40000,
+		.offset     = 0,
+	}, {
+		.name       = "Kernel",
+		.size       = 0x1C0000,
+		.offset     = MTDPART_OFS_APPEND,
+	}, {
+		.name       = "RootFS",
+		.size       = MTDPART_SIZ_FULL,
+		.offset     = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct physmap_flash_data ezkit_flash_data = {
+	.width      = 2,
+	.parts      = ezkit_partitions,
+	.nr_parts   = ARRAY_SIZE(ezkit_partitions),
+};
+
+static struct resource ezkit_flash_resource = {
+	.start = 0x20000000,
+	.end   = 0x203fffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device ezkit_flash_device = {
+	.name          = "physmap-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &ezkit_flash_data,
+	},
+	.num_resources = 1,
+	.resource      = &ezkit_flash_resource,
+};
+#endif
+
 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
 static struct mtd_partition partition_info[] = {
 	{
@@ -420,11 +463,7 @@ static struct mtd_partition bfin_spi_flash_partitions[] = {
 		.offset = 0,
 		.mask_flags = MTD_CAP_ROM
 	}, {
-		.name = "kernel",
-		.size = 0xe0000,
-		.offset = MTDPART_OFS_APPEND,
-	}, {
-		.name = "file system",
+		.name = "linux kernel",
 		.size = MTDPART_SIZ_FULL,
 		.offset = MTDPART_OFS_APPEND,
 	}
@@ -434,7 +473,7 @@ static struct flash_platform_data bfin_spi_flash_data = {
 	.name = "m25p80",
 	.parts = bfin_spi_flash_partitions,
 	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
-	.type = "m25p64",
+	.type = "m25p16",
 };
 
 /* SPI flash chip (m25p64) */
@@ -755,6 +794,24 @@ static struct platform_device i2c_bfin_twi_device = {
 };
 #endif
 
+#ifdef CONFIG_I2C_BOARDINFO
+static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
+#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+	{
+		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
+		.type = "pcf8574_lcd",
+	},
+#endif
+#if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE)
+	{
+		I2C_BOARD_INFO("pcf8574_keypad", 0x27),
+		.type = "pcf8574_keypad",
+		.irq = IRQ_PF8,
+	},
+#endif
+};
+#endif
+
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
 static struct platform_device bfin_sport0_uart_device = {
 	.name = "bfin-sport-uart",
@@ -839,7 +896,32 @@ static struct platform_device bfin_gpios_device = {
 	.resource = &bfin_gpios_resources,
 };
 
+static const unsigned int cclk_vlev_datasheet[] =
+{
+	VRPAIR(VLEV_100, 400000000),
+	VRPAIR(VLEV_105, 426000000),
+	VRPAIR(VLEV_110, 500000000),
+	VRPAIR(VLEV_115, 533000000),
+	VRPAIR(VLEV_120, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+	},
+};
+
 static struct platform_device *stamp_devices[] __initdata = {
+
+	&bfin_dpmc,
+
 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
 	&bf5xx_nand_device,
 #endif
@@ -921,12 +1003,22 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&bfin_device_gpiokeys,
 #endif
 
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+	&ezkit_flash_device,
+#endif
+
 	&bfin_gpios_device,
 };
 
 static int __init stamp_init(void)
 {
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+
+#ifdef CONFIG_I2C_BOARDINFO
+	i2c_register_board_info(0, bfin_i2c_board_info,
+				ARRAY_SIZE(bfin_i2c_board_info));
+#endif
+
 	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 	spi_register_board_info(bfin_spi_board_info,
diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
index a03149c7268..ed2b0b8f5dc 100644
--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -33,12 +33,15 @@
 #include <linux/mtd/partitions.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb/isp1362.h>
+#endif
 #include <linux/ata_platform.h>
 #include <linux/irq.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/portmux.h>
+#include <asm/dpmc.h>
 
 /*
  * Name the Board for the /proc/cpuinfo
@@ -341,7 +344,37 @@ static struct platform_device bfin_pata_device = {
 };
 #endif
 
+static const unsigned int cclk_vlev_datasheet[] =
+{
+	VRPAIR(VLEV_085, 250000000),
+	VRPAIR(VLEV_090, 376000000),
+	VRPAIR(VLEV_095, 426000000),
+	VRPAIR(VLEV_100, 426000000),
+	VRPAIR(VLEV_105, 476000000),
+	VRPAIR(VLEV_110, 476000000),
+	VRPAIR(VLEV_115, 476000000),
+	VRPAIR(VLEV_120, 600000000),
+	VRPAIR(VLEV_125, 600000000),
+	VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+	},
+};
+
 static struct platform_device *cm_bf533_devices[] __initdata = {
+
+	&bfin_dpmc,
+
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 	&bfin_uart_device,
 #endif
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index 08a7943949a..9d28415163e 100644
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -42,6 +42,7 @@
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/portmux.h>
+#include <asm/dpmc.h>
 
 /*
  * Name the Board for the /proc/cpuinfo
@@ -350,7 +351,37 @@ static struct platform_device i2c_gpio_device = {
 };
 #endif
 
+static const unsigned int cclk_vlev_datasheet[] =
+{
+	VRPAIR(VLEV_085, 250000000),
+	VRPAIR(VLEV_090, 376000000),
+	VRPAIR(VLEV_095, 426000000),
+	VRPAIR(VLEV_100, 426000000),
+	VRPAIR(VLEV_105, 476000000),
+	VRPAIR(VLEV_110, 476000000),
+	VRPAIR(VLEV_115, 476000000),
+	VRPAIR(VLEV_120, 600000000),
+	VRPAIR(VLEV_125, 600000000),
+	VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+	},
+};
+
 static struct platform_device *ezkit_devices[] __initdata = {
+
+	&bfin_dpmc,
+
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
 	&smc91x_device,
 #endif
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index 024f418ae54..7fd35fb32fd 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -45,6 +45,7 @@
 #include <asm/bfin5xx_spi.h>
 #include <asm/reboot.h>
 #include <asm/portmux.h>
+#include <asm/dpmc.h>
 
 /*
  * Name the Board for the /proc/cpuinfo
@@ -516,7 +517,37 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 };
 #endif
 
+static const unsigned int cclk_vlev_datasheet[] =
+{
+	VRPAIR(VLEV_085, 250000000),
+	VRPAIR(VLEV_090, 376000000),
+	VRPAIR(VLEV_095, 426000000),
+	VRPAIR(VLEV_100, 426000000),
+	VRPAIR(VLEV_105, 476000000),
+	VRPAIR(VLEV_110, 476000000),
+	VRPAIR(VLEV_115, 476000000),
+	VRPAIR(VLEV_120, 600000000),
+	VRPAIR(VLEV_125, 600000000),
+	VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+	},
+};
+
 static struct platform_device *stamp_devices[] __initdata = {
+
+	&bfin_dpmc,
+
 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
 	&rtc_device,
 #endif
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c
index d8a23cd9b9e..73f2142875e 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c
@@ -35,12 +35,15 @@
 #include <linux/mtd/partitions.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb/isp1362.h>
+#endif
 #include <linux/ata_platform.h>
 #include <linux/irq.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/portmux.h>
+#include <asm/dpmc.h>
 
 /*
  * Name the Board for the /proc/cpuinfo
@@ -428,7 +431,37 @@ static struct platform_device bfin_pata_device = {
 };
 #endif
 
+static const unsigned int cclk_vlev_datasheet[] =
+{
+	VRPAIR(VLEV_085, 250000000),
+	VRPAIR(VLEV_090, 376000000),
+	VRPAIR(VLEV_095, 426000000),
+	VRPAIR(VLEV_100, 426000000),
+	VRPAIR(VLEV_105, 476000000),
+	VRPAIR(VLEV_110, 476000000),
+	VRPAIR(VLEV_115, 476000000),
+	VRPAIR(VLEV_120, 500000000),
+	VRPAIR(VLEV_125, 533000000),
+	VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+	},
+};
+
 static struct platform_device *cm_bf537_devices[] __initdata = {
+
+	&bfin_dpmc,
+
 #if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
 	&hitachi_fb_device,
 #endif
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index d3727b7c2d7..9a756d1f3d7 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -47,6 +47,7 @@
 #include <asm/bfin5xx_spi.h>
 #include <asm/reboot.h>
 #include <asm/portmux.h>
+#include <asm/dpmc.h>
 #include <linux/spi/ad7877.h>
 
 /*
@@ -817,7 +818,37 @@ static struct platform_device bfin_pata_device = {
 };
 #endif
 
+static const unsigned int cclk_vlev_datasheet[] =
+{
+	VRPAIR(VLEV_085, 250000000),
+	VRPAIR(VLEV_090, 376000000),
+	VRPAIR(VLEV_095, 426000000),
+	VRPAIR(VLEV_100, 426000000),
+	VRPAIR(VLEV_105, 476000000),
+	VRPAIR(VLEV_110, 476000000),
+	VRPAIR(VLEV_115, 476000000),
+	VRPAIR(VLEV_120, 500000000),
+	VRPAIR(VLEV_125, 533000000),
+	VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+	},
+};
+
 static struct platform_device *stamp_devices[] __initdata = {
+
+	&bfin_dpmc,
+
 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
 	&bfin_pcmcia_cf_device,
 #endif
diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c
index e3e8479fffb..3b74f96d359 100644
--- a/