diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2010-03-12 16:00:54 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2010-03-12 16:00:54 -0800 |
| commit | dca1d9f6d7ae428c193f32bd3e9a4ca13176648b (patch) | |
| tree | 02de8c3503c1c811754423d2fa3f3b4978044f6e | |
| parent | 9ff99339447de403a46be5e3f23d0c794d540b06 (diff) | |
| parent | 91e013827c0bcbb187ecf02213c5446b6f62d445 (diff) | |
Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (370 commits)
ARM: S3C2443: Add set_rate and round_rate calls for armdiv clock
ARM: S3C2443: Remove #if 0 for clk_mpll
ARM: S3C2443: Update notes on MPLLREF clock
ARM: S3C2443: Further clksrc-clk conversions
ARM: S3C2443: Change to using plat-samsung clksrc-clk implementation
USB: Fix s3c-hsotg build following Samsung platform header moves
ARM: S3C64XX: Reintroduce unconditional build of audio device
ARM: 5961/1: ux500: fix CLKRST addresses
ARM: 5977/1: arm: Enable backtrace printing on oops when PC is corrupted
ASoC: Fix S3C64xx IIS driver for Samsung header reorg
ARM: S3C2440: Fix plat-s3c24xx move of s3c2440/s3c2442 support
[ARM] pxa: fix typo in mxm8x10.h
[ARM] pxa/raumfeld: set GPIO drive bits for LED pins
[ARM] pxa/zeus: Add support for mcp2515 CAN bus
[ARM] pxa/zeus: Add support for onboard max6369 watchdog
[ARM] pxa/zeus: Add Eurotech as the manufacturer
[ARM] pxa/zeus: Correct the USB host initialisation flags
[ARM] pxa/zeus: Allow usage of 8250-compatible UART in uncompress
[ARM] pxa: refactor uncompress.h for non-PXA uarts
[ARM] mmp2: fix incorrect calling of chip->mask_ack() for 2nd level cascaded IRQs
...
627 files changed, 45021 insertions, 9429 deletions
diff --git a/Documentation/arm/Samsung/Overview.txt b/Documentation/arm/Samsung/Overview.txt new file mode 100644 index 00000000000..7cced1fea9c --- /dev/null +++ b/Documentation/arm/Samsung/Overview.txt @@ -0,0 +1,86 @@ + Samsung ARM Linux Overview + ========================== + +Introduction +------------ + + The Samsung range of ARM SoCs spans many similar devices, from the initial + ARM9 through to the newest ARM cores. This document shows an overview of + the current kernel support, how to use it and where to find the code + that supports this. + + The currently supported SoCs are: + + - S3C24XX: See Documentation/arm/Samsung-S3C24XX/Overview.txt for full list + - S3C64XX: S3C6400 and S3C6410 + - S5PC6440 + + S5PC100 and S5PC110 support is currently being merged + + +S3C24XX Systems +--------------- + + There is still documentation in Documnetation/arm/Samsung-S3C24XX/ which + deals with the architecture and drivers specific to these devices. + + See Documentation/arm/Samsung-S3C24XX/Overview.txt for more information + on the implementation details and specific support. + + +Configuration +------------- + + A number of configurations are supplied, as there is no current way of + unifying all the SoCs into one kernel. + + s5p6440_defconfig - S5P6440 specific default configuration + s5pc100_defconfig - S5PC100 specific default configuration + + +Layout +------ + + The directory layout is currently being restructured, and consists of + several platform directories and then the machine specific directories + of the CPUs being built for. + + plat-samsung provides the base for all the implementations, and is the + last in the line of include directories that are processed for the build + specific information. It contains the base clock, GPIO and device definitions + to get the system running. + + plat-s3c is the s3c24xx/s3c64xx platform directory, although it is currently + involved in other builds this will be phased out once the relevant code is + moved elsewhere. + + plat-s3c24xx is for s3c24xx specific builds, see the S3C24XX docs. + + plat-s3c64xx is for the s3c64xx specific bits, see the S3C24XX docs. + + plat-s5p is for s5p specific builds, more to be added. + + + [ to finish ] + + +Port Contributors +----------------- + + Ben Dooks (BJD) + Vincent Sanders + Herbert Potzl + Arnaud Patard (RTP) + Roc Wu + Klaus Fetscher + Dimitry Andric + Shannon Holland + Guillaume Gourat (NexVision) + Christer Weinigel (wingel) (Acer N30) + Lucas Correia Villa Real (S3C2400 port) + + +Document Author +--------------- + +Copyright 2009-2010 Ben Dooks <ben-linux@fluff.org> diff --git a/Documentation/arm/Samsung/clksrc-change-registers.awk b/Documentation/arm/Samsung/clksrc-change-registers.awk new file mode 100755 index 00000000000..0c50220851f --- /dev/null +++ b/Documentation/arm/Samsung/clksrc-change-registers.awk @@ -0,0 +1,167 @@ +#!/usr/bin/awk -f +# +# Copyright 2010 Ben Dooks <ben-linux@fluff.org> +# +# Released under GPLv2 + +# example usage +# ./clksrc-change-registers.awk arch/arm/plat-s5pc1xx/include/plat/regs-clock.h < src > dst + +function extract_value(s) +{ + eqat = index(s, "=") + comat = index(s, ",") + return substr(s, eqat+2, (comat-eqat)-2) +} + +function remove_brackets(b) +{ + return substr(b, 2, length(b)-2) +} + +function splitdefine(l, p) +{ + r = split(l, tp) + + p[0] = tp[2] + p[1] = remove_brackets(tp[3]) +} + +function find_length(f) +{ + if (0) + printf "find_length " f "\n" > "/dev/stderr" + + if (f ~ /0x1/) + return 1 + else if (f ~ /0x3/) + return 2 + else if (f ~ /0x7/) + return 3 + else if (f ~ /0xf/) + return 4 + + printf "unknown legnth " f "\n" > "/dev/stderr" + exit +} + +function find_shift(s) +{ + id = index(s, "<") + if (id <= 0) { + printf "cannot find shift " s "\n" > "/dev/stderr" + exit + } + + return substr(s, id+2) +} + + +BEGIN { + if (ARGC < 2) { + print "too few arguments" > "/dev/stderr" + exit + } + +# read the header file and find the mask values that we will need +# to replace and create an associative array of values + + while (getline line < ARGV[1] > 0) { + if (line ~ /\#define.*_MASK/ && + !(line ~ /S5PC100_EPLL_MASK/) && + !(line ~ /USB_SIG_MASK/)) { + splitdefine(line, fields) + name = fields[0] + if (0) + printf "MASK " line "\n" > "/dev/stderr" + dmask[name,0] = find_length(fields[1]) + dmask[name,1] = find_shift(fields[1]) + if (0) + printf "=> '" name "' LENGTH=" dmask[name,0] " SHIFT=" dmask[name,1] "\n" > "/dev/stderr" + } else { + } + } + + delete ARGV[1] +} + +/clksrc_clk.*=.*{/ { + shift="" + mask="" + divshift="" + reg_div="" + reg_src="" + indent=1 + + print $0 + + for(; indent >= 1;) { + if ((getline line) <= 0) { + printf "unexpected end of file" > "/dev/stderr" + exit 1; + } + + if (line ~ /\.shift/) { + shift = extract_value(line) + } else if (line ~ /\.mask/) { + mask = extract_value(line) + } else if (line ~ /\.reg_divider/) { + reg_div = extract_value(line) + } else if (line ~ /\.reg_source/) { + reg_src = extract_value(line) + } else if (line ~ /\.divider_shift/) { + divshift = extract_value(line) + } else if (line ~ /{/) { + indent++ + print line + } else if (line ~ /}/) { + indent-- + + if (indent == 0) { + if (0) { + printf "shift '" shift "' ='" dmask[shift,0] "'\n" > "/dev/stderr" + printf "mask '" mask "'\n" > "/dev/stderr" + printf "dshft '" divshift "'\n" > "/dev/stderr" + printf "rdiv '" reg_div "'\n" > "/dev/stderr" + printf "rsrc '" reg_src "'\n" > "/dev/stderr" + } + + generated = mask + sub(reg_src, reg_div, generated) + + if (0) { + printf "/* rsrc " reg_src " */\n" + printf "/* rdiv " reg_div " */\n" + printf "/* shift " shift " */\n" + printf "/* mask " mask " */\n" + printf "/* generated " generated " */\n" + } + + if (reg_div != "") { + printf "\t.reg_div = { " + printf ".reg = " reg_div ", " + printf ".shift = " dmask[generated,1] ", " + printf ".size = " dmask[generated,0] ", " + printf "},\n" + } + + printf "\t.reg_src = { " + printf ".reg = " reg_src ", " + printf ".shift = " dmask[mask,1] ", " + printf ".size = " dmask[mask,0] ", " + + printf "},\n" + + } + + print line + } else { + print line + } + + if (0) + printf indent ":" line "\n" > "/dev/stderr" + } +} + +// && ! /clksrc_clk.*=.*{/ { print $0 } diff --git a/MAINTAINERS b/MAINTAINERS index b2403eb495b..fe88b5f732c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -666,6 +666,12 @@ T: git://git.pengutronix.de/git/imx/linux-2.6.git F: arch/arm/mach-mx*/ F: arch/arm/plat-mxc/ +ARM/FREESCALE IMX51 +M: Amit Kucheria <amit.kucheria@canonical.com> +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +S: Maintained +F: arch/arm/mach-mx5/ + ARM/GLOMATION GESBC9312SX MACHINE SUPPORT M: Lennert Buytenhek <kernel@wantstofly.org> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) @@ -939,6 +945,16 @@ W: http://www.fluff.org/ben/linux/ S: Maintained F: arch/arm/mach-s3c6410/ +ARM/SHMOBILE ARM ARCHITECTURE +M: Paul Mundt <lethal@linux-sh.org> +M: Magnus Damm <magnus.damm@gmail.com> +L: linux-sh@vger.kernel.org +T: git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/genesis-2.6.git +W: http://oss.renesas.com +S: Supported +F: arch/arm/mach-shmobile/ +F: drivers/sh/ + ARM/TECHNOLOGIC SYSTEMS TS7250 MACHINE SUPPORT M: Lennert Buytenhek <kernel@wantstofly.org> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) @@ -4502,6 +4518,13 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) T: git git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git S: Maintained +MMP2 SUPPORT (aka ARMADA610) +M: Haojian Zhuang <haojian.zhuang@marvell.com> +M: Eric Miao <eric.y.miao@gmail.com> +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +T: git git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git +S: Maintained + PXA MMCI DRIVER S: Orphan diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 15d43c39335..cadfe2ee66a 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -324,10 +324,9 @@ config ARCH_MXC bool "Freescale MXC/iMX-based" select GENERIC_TIME select GENERIC_CLOCKEVENTS - select ARCH_MTD_XIP - select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB select HAVE_CLK + select COMMON_CLKDEV help Support for Freescale MXC/iMX-based family of processors @@ -511,7 +510,7 @@ config ARCH_ORION5X Orion-2 (5281), Orion-1-90 (6183). config ARCH_MMP - bool "Marvell PXA168/910" + bool "Marvell PXA168/910/MMP2" depends on MMU select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB @@ -522,7 +521,7 @@ config ARCH_MMP select TICK_ONESHOT select PLAT_PXA help - Support for Marvell's PXA168/910 processor line. + Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line. config ARCH_KS8695 bool "Micrel/Kendin KS8695" @@ -608,6 +607,11 @@ config ARCH_MSM interface to the ARM9 modem processor which runs the baseband stack and controls some vital subsystems (clock and power control, etc). +config ARCH_SHMOBILE + bool "Renesas SH-Mobile" + help + Support for Renesas's SH-Mobile ARM platforms + config ARCH_RPC bool "RiscPC" select ARCH_ACORN @@ -651,12 +655,43 @@ config ARCH_S3C2410 config ARCH_S3C64XX bool "Samsung S3C64XX" + select PLAT_SAMSUNG + select CPU_V6 select GENERIC_GPIO + select ARM_VIC select HAVE_CLK + select NO_IOPORT select ARCH_HAS_CPUFREQ + select ARCH_REQUIRE_GPIOLIB + select SAMSUNG_CLKSRC + select SAMSUNG_IRQ_VIC_TIMER + select SAMSUNG_IRQ_UART + select S3C_GPIO_TRACK + select S3C_GPIO_PULL_UPDOWN + select S3C_GPIO_CFG_S3C24XX + select S3C_GPIO_CFG_S3C64XX + select S3C_DEV_NAND + select USB_ARCH_HAS_OHCI + select SAMSUNG_GPIOLIB_4BIT help Samsung S3C64XX series based systems +config ARCH_S5P6440 + bool "Samsung S5P6440" + select CPU_V6 + select GENERIC_GPIO + select HAVE_CLK + help + Samsung S5P6440 CPU based systems + +config ARCH_S5P6442 + bool "Samsung S5P6442" + select CPU_V6 + select GENERIC_GPIO + select HAVE_CLK + help + Samsung S5P6442 CPU based systems + config ARCH_S5PC1XX bool "Samsung S5PC1XX" select GENERIC_GPIO @@ -666,6 +701,15 @@ config ARCH_S5PC1XX help Samsung S5PC1XX series based systems +config ARCH_S5PV210 + bool "Samsung S5PV210/S5PC110" + select CPU_V7 + select GENERIC_GPIO + select HAVE_CLK + select ARM_L1_CACHE_SHIFT_6 + help + Samsung S5PV210/S5PC110 series based systems + config ARCH_SHARK bool "Shark" select CPU_SA110 @@ -831,8 +875,7 @@ source "arch/arm/mach-sa1100/Kconfig" source "arch/arm/plat-samsung/Kconfig" source "arch/arm/plat-s3c24xx/Kconfig" -source "arch/arm/plat-s3c64xx/Kconfig" -source "arch/arm/plat-s3c/Kconfig" +source "arch/arm/plat-s5p/Kconfig" source "arch/arm/plat-s5pc1xx/Kconfig" if ARCH_S3C2410 @@ -840,21 +883,27 @@ source "arch/arm/mach-s3c2400/Kconfig" source "arch/arm/mach-s3c2410/Kconfig" source "arch/arm/mach-s3c2412/Kconfig" source "arch/arm/mach-s3c2440/Kconfig" -source "arch/arm/mach-s3c2442/Kconfig" source "arch/arm/mach-s3c2443/Kconfig" endif if ARCH_S3C64XX -source "arch/arm/mach-s3c6400/Kconfig" -source "arch/arm/mach-s3c6410/Kconfig" +source "arch/arm/mach-s3c64xx/Kconfig" endif -source "arch/arm/plat-stmp3xxx/Kconfig" +source "arch/arm/mach-s5p6440/Kconfig" + +source "arch/arm/mach-s5p6442/Kconfig" if ARCH_S5PC1XX source "arch/arm/mach-s5pc100/Kconfig" endif +source "arch/arm/mach-s5pv210/Kconfig" + +source "arch/arm/mach-shmobile/Kconfig" + +source "arch/arm/plat-stmp3xxx/Kconfig" + source "arch/arm/mach-u300/Kconfig" source "arch/arm/mach-ux500/Kconfig" @@ -1120,7 +1169,7 @@ source kernel/Kconfig.preempt config HZ int default 128 if ARCH_L7200 - default 200 if ARCH_EBSA110 || ARCH_S3C2410 + default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PV210 default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER default AT91_TIMER_HZ if ARCH_AT91 default 100 diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 5cb9326df7a..91344af75f3 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -117,7 +117,7 @@ config DEBUG_CLPS711X_UART2 cause the debug messages to appear on the first serial port. config DEBUG_S3C_UART - depends on PLAT_S3C + depends on PLAT_SAMSUNG int "S3C UART to use for low-level debug" default "0" help diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 81f54ca3078..ed820e737a8 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -146,6 +146,7 @@ machine-$(CONFIG_ARCH_MX1) := mx1 machine-$(CONFIG_ARCH_MX2) := mx2 machine-$(CONFIG_ARCH_MX25) := mx25 machine-$(CONFIG_ARCH_MX3) := mx3 +machine-$(CONFIG_ARCH_MX5) := mx5 machine-$(CONFIG_ARCH_MXC91231) := mxc91231 machine-$(CONFIG_ARCH_NETX) := netx machine-$(CONFIG_ARCH_NOMADIK) := nomadik @@ -159,12 +160,16 @@ machine-$(CONFIG_ARCH_PNX4008) := pnx4008 machine-$(CONFIG_ARCH_PXA) := pxa machine-$(CONFIG_ARCH_REALVIEW) := realview machine-$(CONFIG_ARCH_RPC) := rpc -machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443 +machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2443 machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0 -machine-$(CONFIG_ARCH_S3C64XX) := s3c6400 s3c6410 +machine-$(CONFIG_ARCH_S3C64XX) := s3c64xx +machine-$(CONFIG_ARCH_S5P6440) := s5p6440 +machine-$(CONFIG_ARCH_S5P6442) := s5p6442 machine-$(CONFIG_ARCH_S5PC1XX) := s5pc100 +machine-$(CONFIG_ARCH_S5PV210) := s5pv210 machine-$(CONFIG_ARCH_SA1100) := sa1100 machine-$(CONFIG_ARCH_SHARK) := shark +machine-$(CONFIG_ARCH_SHMOBILE) := shmobile machine-$(CONFIG_ARCH_STMP378X) := stmp378x machine-$(CONFIG_ARCH_STMP37XX) := stmp37xx machine-$(CONFIG_ARCH_U300) := u300 @@ -178,14 +183,15 @@ machine-$(CONFIG_FOOTBRIDGE) := footbridge # by CONFIG_* macro name. plat-$(CONFIG_ARCH_MXC) := mxc plat-$(CONFIG_ARCH_OMAP) := omap +plat-$(CONFIG_ARCH_S3C64XX) := samsung plat-$(CONFIG_ARCH_STMP3XXX) := stmp3xxx plat-$(CONFIG_PLAT_IOP) := iop plat-$(CONFIG_PLAT_NOMADIK) := nomadik plat-$(CONFIG_PLAT_ORION) := orion plat-$(CONFIG_PLAT_PXA) := pxa -plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c samsung -plat-$(CONFIG_PLAT_S3C64XX) := s3c64xx s3c samsung -plat-$(CONFIG_PLAT_S5PC1XX) := s5pc1xx s3c samsung +plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx samsung +plat-$(CONFIG_PLAT_S5PC1XX) := s5pc1xx samsung +plat-$(CONFIG_PLAT_S5P) := s5p samsung ifeq ($(CONFIG_ARCH_EBSA110),y) # This is what happens if you forget the IOCS16 line. diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 99b75aa1c2e..535a91daaa5 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -170,8 +170,8 @@ not_angel: .text adr r0, LC0 - ARM( ldmia r0, {r1, r2, r3, r4, r5, r6, ip, sp} ) - THUMB( ldmia r0, {r1, r2, r3, r4, r5, r6, ip} ) + ARM( ldmia r0, {r1, r2, r3, r4, r5, r6, r11, ip, sp}) + THUMB( ldmia r0, {r1, r2, r3, r4, r5, r6, r11, ip} ) THUMB( ldr sp, [r0, #28] ) subs r0, r0, r1 @ calculate the delta offset @@ -182,12 +182,13 @@ not_angel: /* * We're running at a different address. We need to fix * up various pointers: - * r5 - zImage base address - * r6 - GOT start + * r5 - zImage base address (_start) + * r6 - size of decompressed image + * r11 - GOT start * ip - GOT end */ add r5, r5, r0 - add r6, r6, r0 + add r11, r11, r0 add ip, ip, r0 #ifndef CONFIG_ZBOOT_ROM @@ -205,10 +206,10 @@ not_angel: /* * Relocate all entries in the GOT table. */ -1: ldr r1, [r6, #0] @ relocate entries in the GOT +1: ldr r1, [r11, #0] @ relocate entries in the GOT add r1, r1, r0 @ table. This fixes up the - str r1, [r6], #4 @ C references. - cmp r6, ip + str r1, [r11], #4 @ C references. + cmp r11, ip blo 1b #else @@ -216,12 +217,12 @@ not_angel: * Relocate entries in the GOT table. We only relocate * the entries that are outside the (relocated) BSS region. */ -1: ldr r1, [r6, #0] @ relocate entries in the GOT +1: ldr r1, [r11, #0] @ relocate entries in the GOT cmp r1, r2 @ entry < bss_start || cmphs r3, r1 @ _end < entry addlo r1, r1, r0 @ table. This fixes up the - str r1, [r6], #4 @ C references. - cmp r6, ip + str r1, [r11], #4 @ C references. + cmp r11, ip blo 1b #endif @@ -247,6 +248,7 @@ not_relocated: mov r0, #0 * Check to see if we will overwrite ourselves. * r4 = final kernel address * r5 = start of this image + * r6 = size of decompressed image * r2 = end of malloc space (and therefore this image) * We basically want: * r4 >= r2 -> OK @@ -254,8 +256,7 @@ not_relocated: mov r0, #0 */ cmp r4, r2 bhs wont_overwrite - sub r3, sp, r5 @ > compressed kernel size - add r0, r4, r3, lsl #2 @ allow for 4x expansion + add r0, r4, r6 cmp r0, r5 bls wont_overwrite @@ -271,7 +272,6 @@ not_relocated: mov r0, #0 * r1-r3 = unused * r4 = kernel execution address * r5 = decompressed kernel start - * r6 = processor ID * r7 = architecture ID * r8 = atags pointer * r9-r12,r14 = corrupted @@ -312,7 +312,8 @@ LC0: .word LC0 @ r1 .word _end @ r3 .word zreladdr @ r4 .word _start @ r5 - .word _got_start @ r6 + .word _image_size @ r6 + .word _got_start @ r11 .word _got_end @ ip .word user_stack+4096 @ sp LC1: .word reloc_end - reloc_start @@ -336,7 +337,6 @@ params: ldr r0, =params_phys * * On entry, * r4 = kernel execution address - * r6 = processor ID * r7 = architecture number * r8 = atags pointer * r9 = run-time address of "start" (???) @@ -542,7 +542,6 @@ __common_mmu_cache_on: * r1-r3 = unused * r4 = kernel execution address * r5 = decompressed kernel start - * r6 = processor ID * r7 = architecture ID * r8 = atags pointer * r9-r12,r14 = corrupted @@ -581,19 +580,19 @@ call_kernel: bl cache_clean_flush * r1 = corrupted * r2 = corrupted * r3 = block offset - * r6 = corrupted + * r9 = corrupted * r12 = corrupted */ call_cache_fn: adr r12, proc_types #ifdef CONFIG_CPU_CP15 - mrc p15, 0, r6, c0, c0 @ get processor ID + mrc p15, 0, r9, c0, c0 @ get processor ID #else - ldr r6, =CONFIG_PROCESSOR_ID + ldr r9, =CONFIG_PROCESSOR_ID #endif 1: ldr r1, [r12, #0] @ get value ldr r2, [r12, #4] @ get mask - eor r1, r1, r6 @ (real ^ match) + eor r1, r1, r9 @ (real ^ match) tst r1, r2 @ & mask ARM( addeq pc, r12, r3 ) @ call cache function THUMB( addeq r12, r3 ) @@ -778,8 +777,7 @@ proc_types: * Turn off the Cache and MMU. ARMv3 does not support * reading the control register, but ARMv4 does. * - * On entry, r6 = processor ID - * On exit, r0, r1, r2, r3, r12 corrupted + * On exit, r0, r1, r2, r3, r9, r12 corrupted * This routine must preserve: r4, r6, r7 */ .align 5 @@ -852,10 +850,8 @@ __armv3_mmu_cache_off: /* * Clean and flush the cache to maintain consistency. * - * On entry, - * r6 = processor ID * On exit, - * r1, r2, r3, r11, r12 corrupted + * r1, r2, r3, r9, r11, r12 corrupted * This routine must preserve: * r0, r4, r5, r6, r7 */ @@ -967,7 +963,7 @@ __armv4_mmu_cache_flush: mov r2, #64*1024 @ default: 32K dcache size (*2) mov r11, #32 @ default: 32 byte line size mrc p15, 0, r3, c0, c0, 1 @ read cache type - teq r3, r6 @ cache ID register present? + teq r3, r9 @ cache ID register present? beq no_cache_id mov r1, r3, lsr #18 and r1, r1, #7 diff --git a/arch/arm/boot/compressed/vmlinux.lds.in b/arch/arm/boot/compressed/vmlinux.lds.in index 7ca9ecff652..d08168941bd 100644 --- a/arch/arm/boot/compressed/vmlinux.lds.in +++ b/arch/arm/boot/compressed/vmlinux.lds.in @@ -43,6 +43,9 @@ SECTIONS _etext = .; + /* Assume size of decompressed image is 4x the compressed image */ + _image_size = (_etext - _text) * 4; + _got_start = .; .got : { *(.got) } _got_end = .; diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index bd36c778c81..90ae00b631c 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c @@ -32,6 +32,12 @@ #include <asm/hardware/locomo.h> +/* LoCoMo Interrupts */ +#define IRQ_LOCOMO_KEY (0) +#define IRQ_LOCOMO_GPIO (1) +#define IRQ_LOCOMO_LT (2) +#define IRQ_LOCOMO_SPI (3) + /* M62332 output channel selection */ #define M62332_EVR_CH 1 /* M62332 volume channel number */ /* 0 : CH.1 , 1 : CH. 2 */ @@ -58,6 +64,7 @@ struct locomo { struct device *dev; unsigned long phys; unsigned int irq; + int irq_base; spinlock_t lock; void __iomem *base; #ifdef CONFIG_PM @@ -81,9 +88,7 @@ struct locomo_dev_info { static struct locomo_dev_info locomo_devices[] = { { .devid = LOCOMO_DEVID_KEYBOARD, - .irq = { - IRQ_LOCOMO_KEY, - }, + .irq = { IRQ_LOCOMO_KEY }, .name = "locomo-keyboard", .offset = LOCOMO_KEYBOARD, .length = 16, @@ -133,53 +138,20 @@ static struct locomo_dev_info locomo_devices[] = { }, }; - -/** LoCoMo interrupt handling stuff. - * NOTE: LoCoMo has a 1 to many mapping on all of its IRQs. - * that is, there is only one real hardware interrupt - * we determine which interrupt it is by reading some IO memory. - * We have two levels of expansion, first in the handler for the - * hardware interrupt we generate an interrupt - * IRQ_LOCOMO_*_BASE and those handlers generate more interrupts - * - * hardware irq reads LOCOMO_ICR & 0x0f00 - * IRQ_LOCOMO_KEY_BASE - * IRQ_LOCOMO_GPIO_BASE - * IRQ_LOCOMO_LT_BASE - * IRQ_LOCOMO_SPI_BASE - * IRQ_LOCOMO_KEY_BASE reads LOCOMO_KIC & 0x0001 - * IRQ_LOCOMO_KEY - * IRQ_LOCOMO_GPIO_BASE reads LOCOMO_GIR & LOCOMO_GPD & 0xffff - * IRQ_LOCOMO_GPIO[0-15] - * IRQ_LOCOMO_LT_BASE reads LOCOMO_LTINT & 0x0001 - * IRQ_LOCOMO_LT - * IRQ_LOCOMO_SPI_BASE reads LOCOMO_SPIIR & 0x000F - * IRQ_LOCOMO_SPI_RFR - * IRQ_LOCOMO_SPI_RFW - * IRQ_LOCOMO_SPI_OVRN - * IRQ_LOCOMO_SPI_TEND - */ - -#define LOCOMO_IRQ_START (IRQ_LOCOMO_KEY_BASE) -#define LOCOMO_IRQ_KEY_START (IRQ_LOCOMO_KEY) -#define LOCOMO_IRQ_GPIO_START (IRQ_LOCOMO_GPIO0) -#define LOCOMO_IRQ_LT_START (IRQ_LOCOMO_LT) -#define LOCOMO_IRQ_SPI_START (IRQ_LOCOMO_SPI_RFR) - static void locomo_handler(unsigned int irq, struct irq_desc *desc) { + struct locomo *lchip = get_irq_chip_data(irq); int req, i; - void __iomem *mapbase = get_irq_chip_data(irq); /* Acknowledge the parent IRQ */ desc->chip->ack(irq); /* check why this interrupt was generated */ - req = locomo_readl(mapbase + LOCOMO_ICR) & 0x0f00; + req = locomo_readl(lchip->base + LOCOMO_ICR) & 0x0f00; if (req) { /* generate the next interrupt(s) */ - irq = LOCOMO_IRQ_START; + irq = lchip->irq_base; for (i = 0; i <= 3; i++, irq++) { if (req & (0x0100 << i)) { generic_handle_irq(irq); @@ -195,20 +167,20 @@ static void locomo_ack_irq(unsigned int irq) static void locomo_mask_irq(unsigned int irq) { - void __iomem *mapbase = get_irq_chip_data(irq); + struct locomo *lchip = get_irq_chip_data(irq); unsigned int r; - r = locomo_readl(mapbase + LOCOMO_ICR); - r &= ~(0x0010 << (irq - LOCOMO_IRQ_START)); - locomo_writel(r, mapbase + LOCOMO_ICR); + r = locomo_readl(lchip->base + LOCOMO_ICR); + r &= ~(0x0010 << (irq - lchip->irq_base)); + locomo_writel(r, lchip->base + LOCOMO_ICR); } static void locomo_unmask_irq(unsigned int irq) { - void __iomem *mapbase = get_irq_chip_data(irq); + struct locomo *lchip = get_irq_chip_data(irq); unsigned int r; - r = locomo_readl(mapbase + LOCOMO_ICR); - r |= (0x0010 << (irq - LOCOMO_IRQ_START)); - locomo_writel(r, mapbase + LOCOMO_ICR); + r = locomo_readl(lchip->base + LOCOMO_ICR); + r |= (0x0010 << (irq - lchip->irq_base)); + locomo_writel(r, lchip->base + LOCOMO_ICR); } static struct irq_chip locomo_chip = { @@ -218,297 +190,22 @@ static struct irq_chip locomo_chip = { .unmask = locomo_unmask_irq, }; -static void locomo_key_handler(unsigned int irq, struct irq_desc *desc) -{ - void __iomem *mapbase = get_irq_chip_data(irq); - - if (locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC) & 0x0001) { - generic_handle_irq(LOCOMO_IRQ_KEY_START); - } -} - -static void locomo_key_ack_irq(unsigned int irq) -{ - void __iomem *mapbase = get_irq_chip_data(irq); - unsigned int r; - r = locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC); - r &= ~(0x0100 << (irq - LOCOMO_IRQ_KEY_START)); - locomo_writel(r, mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC); -} - -static void locomo_key_mask_irq(unsigned int irq) -{ - void __iomem *mapbase = get_irq_chip_data(irq); - unsigned int r; - r = locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC); - r &= ~(0x0010 << (irq - LOCOMO_IRQ_KEY_START)); - locomo_writel(r, mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC); -} - -static void locomo_key_unmask_irq(unsigned int irq) -{ - void __iomem *mapbase = get_irq_chip_data(irq); - unsigned int r; - r = locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC); - r |= (0x0010 << (irq - LOCOMO_IRQ_KEY_START)); - locomo_writel(r, mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC); -} - -static struct irq_chip locomo_key_chip = { - .name = "LOCOMO-key", - .ack = locomo_key_ack_irq, - .mask = locomo_key_mask_irq, - .unmask = locomo_key_unmask_irq, -}; - -static void locomo_gpio_handler(unsigned int irq, struct irq_desc *desc) -{ - int req, i; - void __iomem *mapbase = get_irq_chip_data(irq); - - req = locomo_readl(mapbase + LOCOMO_GIR) & - locomo_readl(mapbase + LOCOMO_GPD) & - 0xffff; - - if (req) { - irq = LOCOMO_IRQ_GPIO_START; - for (i = 0; i <= 15; i++, irq++) { - if (req & (0x0001 << i)) { - generic_handle_irq(irq); - } - } - } -} - -static void locomo_gpio_ack_irq(unsigned int irq) -{ - void __iomem *mapbase = get_irq_chip_data(irq); - unsigned int r; - r = locomo_readl(mapbase + LOCOMO_GWE); - r |= (0x0001 << (irq - LOCOMO_IRQ_GPIO_START)); - locomo_writel(r, mapbase + LOCOMO_GWE); - - r = locomo_readl(mapbase + LOCOMO_GIS); - r &= ~(0x0001 << (irq - LOCOMO_IRQ_GPIO_START)); - locomo_writel(r, mapbase + LOCOMO_GIS); - - r = locomo_readl(mapbase + LOCOMO_GWE); - r &= ~(0x0001 << (irq - LOCOMO_IRQ_GPIO_START)); - locomo_writel(r, mapbase + LOCOMO_GWE); -} - -static void locomo_gpio_mask_irq(unsigned int irq) -{ - void __iomem *mapbase = get_irq_chip_data(irq); - unsigned int r; - r = locomo_readl(mapbase + LOCOMO_GIE); - r &= ~(0x0001 << (irq - LOCOMO_IRQ_GPIO_START)); - locomo_writel(r, mapbase + LOCOMO_GIE); -} - -static void locomo_gpio_unmask_irq(unsigned int irq) -{ - void __iomem *mapbase = get_irq_chip_data(irq); - unsigned int r; - r = locomo_readl(mapbase + LOCOMO_GIE); - r |= (0x0001 << (irq - LOCOMO_IRQ_GPIO_START)); - locomo_writel(r, mapbase + LOCOMO_GIE); -} - -static int GPIO_IRQ_rising_edge; -static int GPIO_IRQ_falling_edge; - -static int locomo_gpio_type(unsigned int irq, unsigned int type) -{ - unsigned int mask; - void __iomem *mapbase = get_irq_chip_data(irq); - - mask = 1 << (irq - LOCOMO_IRQ_GPIO_START); - - if (type == IRQ_TYPE_PROBE) { - if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask) - return 0; - type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; - } - - if (type & IRQ_TYPE_EDGE_RISING) - GPIO_IRQ_rising_edge |= mask; - else - GPIO_IRQ_rising_edge &= ~mask; - if (type & IRQ_TYPE_EDGE_FALLING) - GPIO_IRQ_falling_edge |= mask; - else - GPIO_IRQ_falling_edge &= ~mask; - locomo_writel(GPIO_IRQ_rising_edge, mapbase + LOCOMO_GRIE); - locomo_writel(GPIO_IRQ_falling_edge, mapbase + LOCOMO_GFIE); - - return 0; -} - -static struct irq_chip locomo_gpio_chip = { - .name = "LOCOMO-gpio", - .ack = locomo_gpio_ack_irq, - .mask = locomo_gpio_mask_irq, - .unmask = locomo_gpio_unmask_irq, - .set_type = locomo_gpio_type, -}; - -static void locomo_lt_handler(unsigned int irq, struct irq_desc *desc) -{ - void __iomem *mapbase = get_irq_chip_data(irq); - - if (locomo_readl(mapbase + LOCOMO_LTINT) & 0x0001) { - generic_handle_irq(LOCOMO_IRQ_LT_START); - } -} - -static void locomo_lt_ack_irq(unsigned int irq) -{ - void __iomem *mapbase = get_irq_chip_data(irq); - unsigned int r; - r = locomo_readl(mapbase + LOCOMO_LTINT); - r &= ~(0x0100 << (irq - LOCOMO_IRQ_LT_START)); - locomo_writel(r, mapbase + LOCOMO_LTINT); -} - -static void locomo_lt_mask_irq(unsigned int irq) -{ - void __iomem *mapbase = get_irq_chip_data(irq); - unsigned int r; - r = locomo_readl(mapbase + LOCOMO_LTINT); - r &= ~(0x0010 << (irq - LOCOMO_IRQ_LT_START)); - locomo_writel(r, mapbase + LOCOMO_LTINT); -} - -static void locomo_lt_unmask_irq(unsigned int irq) -{ - void __iomem *mapbase = get_irq_chip_data(irq); - unsigned int r; - r = locomo_readl(mapbase + LOCOMO_LTINT); - r |= (0x0010 << (irq - LOCOMO_IRQ_LT_START)); - locomo_writel(r, mapbase + LOCOMO_LTINT); -} - -static struct irq_chip locomo_lt_chip = { - .name = "LOCOMO-lt", - .ack = locomo_lt_ack_irq, - .mask = locomo_lt_mask_irq, - .unmask = locomo_lt_unmask_irq, -}; - -static void locomo_spi_handler(unsigned int irq, struct irq_desc *desc) -{ - int req, i; - void __iomem *mapbase = get_irq_chip_data(irq); - - req = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIR) & 0x000F; - if (req) { - irq = LOCOMO_IRQ_SPI_START; - - for (i = 0; i <= 3; i++, irq++) { - if (req & (0x0001 << i)) { - generic_handle_irq(irq); - } - } - } -} - -static void locomo_spi_ack_irq(unsigned int irq) -{ - void __iomem *mapbase = get_irq_chip_data(irq); - unsigned int r; - r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIWE); - r |= (0x0001 << (irq - LOCOMO_IRQ_SPI_START)); - locomo_writel(r, mapbase + LOCOMO_SPI + LOCOMO_SPIWE); - - r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIS); - r &= ~(0x0001 << (irq - LOCOMO_IRQ_SPI_START)); - locomo_writel(r, mapbase + LOCOMO_SPI + LOCOMO_SPIIS); - - r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIWE); - r &= ~(0x0001 << (irq - LOCOMO_IRQ_SPI_START)); - locomo_writel(r, mapbase + LOCOMO_SPI + LOCOMO_SPIWE); -} - -static void locomo_spi_mask_irq(unsigned int irq) -{ - void __iomem *mapbase = get_irq_chip_data(irq); - unsigned int r; - r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIE); - r &= ~(0x0001 << (irq - LOCOMO_IRQ_SPI_START)); - locomo_writel(r, mapbase + LOCOMO_SPI + LOCOMO_SPIIE); -} - -static void locomo_spi_unmask_irq(unsigned int irq) -{ - void __iomem *mapbase = get_irq_chip_data(irq); - unsigned int r; - r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIE); - r |= (0x0001 << (irq - LOCOMO_IRQ_SPI_START)); - locomo_writel(r, mapbase + LOCOMO_SPI + LOCOMO_SPIIE); -} - -static struct irq_chip locomo_spi_chip = { - .name = "LOCOMO-spi", - .ack = locomo_spi_ack_irq, - .mask = locomo_spi_mask_irq, - .unmask = locomo_spi_unmask_irq, -}; - static void locomo_setup_irq(struct locomo *lchip) { - int irq; - void __iomem *irqbase = lchip->base; + int irq = lchip->irq_base; /* * Install handler for IRQ_LOCOMO_HW. */ set_irq_type(lchip->irq, IRQ_TYPE_EDGE_FALLING); - set_irq_chip_data(lchip->irq, irqbase); + set_irq_chip_data(lchip->irq, lchip); set_irq_chained_handler(lchip->irq, locomo_handler); - /* Install handlers for IRQ_LOCOMO_*_BASE */ - set_irq_chip(IRQ_LOCOMO_KEY_BASE, &locomo_chip); - set_irq_chip_data(IRQ_LOCOMO_KEY_BASE, irqbase); - set_irq_chained_handler(IRQ_LOCOMO_KEY_BASE, locomo_key_handler); - - set_irq_chip(IRQ_LOCOMO_GPIO_BASE, &locomo_chip); - set_irq_chip_data(IRQ_LOCOMO_GPIO_BASE, irqbase); - set_irq_chained_handler(IRQ_LOCOMO_GPIO_BASE, locomo_gpio_handler); - - set_irq_chip(IRQ_LOCOMO_LT_BASE, &locomo_chip); - set_irq_chip_data(IRQ_LOCOMO_LT_BASE, irqbase); - set_irq_chained_handler(IRQ_LOCOMO_LT_BASE, locomo_lt_handler); - - set_irq_chip(IRQ_LOCOMO_SPI_BASE, &locomo_chip); - set_irq_chip_data(IRQ_LOCOMO_SPI_BASE, irqbase); - set_irq_chained_handler(IRQ_LOCOMO_SPI_BASE, locomo_spi_handler); - - /* install handlers for IRQ_LOCOMO_KEY_BASE generated interrupts */ - set_irq_chip(LOCOMO_IRQ_KEY_START, &locomo_key_chip); - set_irq_chip_data(LOCOMO_IRQ_KEY_START, irqbase); - set_irq_handler(LOCOMO_IRQ_KEY_START, handle_edge_irq); - set_irq_flags(LOCOMO_IRQ_KEY_START, IRQF_VALID | IRQF_PROBE); - - /* install handlers for IRQ_LOCOMO_GPIO_BASE generated interrupts */ - for (irq = LOCOMO_IRQ_GPIO_START; irq < LOCOMO_IRQ_GPIO_START + 16; irq++) { - set_irq_chip(irq, &locomo_gpio_chip); - set_irq_chip_data(irq, irqbase); - set_irq_handler(irq, handle_edge_irq); - set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); - } - - /* install handlers for IRQ_LOCOMO_LT_BASE generated interrupts */ - set_irq_chip(LOCOMO_IRQ_LT_START, &locomo_lt_chip); - set_irq_chip_data(LOCOMO_IRQ_LT_START, irqbase); - set_irq_handler(LOCOMO_IRQ_LT_START, handle_edge_irq); - set_irq_flags(LOCOMO_IRQ_LT_START, IRQF_VALID | IRQF_PROBE); - - /* install handlers for IRQ_LOCOMO_SPI_BASE generated interrupts */ - for (irq = LOCOMO_IRQ_SPI_START; irq < LOCOMO_IRQ_SPI_START + 4; irq++) { - set_irq_chip(irq, &locomo_spi_chip); - set_irq_chip_data(irq, irqbase); - set_irq_handler(irq, handle_edge_irq); + /* Install handlers for IRQ_LOCOMO_* */ + for ( ; irq <= lchip->irq_base + 3; irq++) { + set_irq_chip(irq, &locomo_chip); + set_irq_chip_data(irq, lchip); + set_irq_handler(irq, handle_level_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } } @@ -555,7 +252,8 @@ locomo_init_one_child(struct locomo *lchip, struct locomo_dev_info *info) dev->mapbase = 0; dev->length = info->length; - memmove(dev->irq, info->irq, sizeof(dev->irq)); + dev->irq[0] = (lchip->irq_base == NO_IRQ) ? + NO_IRQ : lchip->irq_base + info->irq[0]; ret = device_register(&dev->dev); if (ret) { @@ -672,6 +370,7 @@ static int locomo_resume(struct platform_device *dev) static int __locomo_probe(struct device *me, struct resource *mem, int irq) { + struct locomo_platform_data *pdata = me->platform_data; struct locomo *lchip; unsigned long r; int i, ret = -ENODEV; @@ -687,6 +386,7 @@ __locomo_probe(struct device *me, struct resource *mem, int irq) lchip->phys = mem->start; lchip->irq = irq; + lchip->irq_base = (pdata) ? pdata->irq_base : NO_IRQ; /* * Map the whole region. This also maps the @@ -753,7 +453,7 @@ __locomo_probe(struct device *me, struct resource *mem, int irq) * The interrupt controller must be initialised before any * other device to ensure that the interrupts are available. */ - if (lchip->irq != NO_IRQ) + if (lchip->irq != NO_IRQ && lchip->irq_base != NO_IRQ) locomo_setup_irq(lchip); for (i = 0; i < ARRAY_SIZE(locomo_devices); i++) diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index 8ba7044c554..a52a27c1d9b 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -35,6 +35,58 @@ #include <asm/hardware/sa1111.h> +/* SA1111 IRQs */ +#define IRQ_GPAIN0 (0) +#define IRQ_GPAIN1 (1) +#define IRQ_GPAIN2 (2) +#define IRQ_GPAIN3 (3) +#define IRQ_GPBIN0 (4) +#define IRQ_GPBIN1 (5) +#define IRQ_GPBIN2 (6) +#define IRQ_GPBIN3 (7) +#define IRQ_GPBIN4 (8) +#define IRQ_GPBIN5 (9) +#define IRQ_GPCIN0 (10) +#define IRQ_GPCIN1 (11) +#define IRQ_GPCIN2 (12) +#define IRQ_GPCIN3 (13) +#define IRQ_GPCIN4 (14) +#define IRQ_GPCIN5 (15) +#define IRQ_GPCIN6 (16) +#define IRQ_GPCIN7 (17) +#define IRQ_MSTXINT (18) +#define IRQ_MSRXINT (19) +#define IRQ_MSSTOPERRINT (20) +#define IRQ_TPTXINT (21) +#define IRQ_TPRXINT (22) +#define IRQ_TPSTOPERRINT (23) +#define SSPXMTINT (24) +#define SSPRCVINT (25) +#define SSPROR (26) +#define AUDXMTDMADONEA (32) +#define AUDRCVDMADONEA (33) +#define AUDXMTDMADONEB (34) +#define AUDRCVDMADONEB (35) +#define AUDTFSR (36) +#define AUDRFSR (37) +#define AUDTUR (38) +#define AUDROR (39) +#define AUDDTS (40) +#define AUDRDD (41) +#define AUDSTO (42) +#define IRQ_USBPWR (43) +#define IRQ_HCIM (44) +#define IRQ_HCIBUFFACC (45) +#define IRQ_HCIRMTWKP (46) +#define IRQ_NHCIMFCIR (47) +#define IRQ_USB_PORT_RESUME (48) +#define IRQ_S0_READY_NINT (49) +#define IRQ_S1_READY_NINT (50) +#define IRQ_S0_CD_VALID (51) +#define IRQ_S1_CD_VALID (52) +#define IRQ_S0_BVD1_STSCHG (53) +#define IRQ_S1_BVD1_STSCHG (54) + extern void __init sa1110_mb_enable(void); /* @@ -49,6 +101,7 @@ struct sa1111 { struct clk *clk; unsigned long phys; int irq; + int irq_base; /* base for cascaded on-chip IRQs */ spinlock_t lock; void __iomem *base; #ifdef CONFIG_PM @@ -152,36 +205,37 @@ static void sa1111_irq_handler(unsigned int irq, struct irq_desc *desc) { unsigned int stat0, stat1, i; - void __iomem *base = get_irq_data(irq); + struct sa1111 *sachip = get_irq_data(irq); + void __iomem *mapbase = sachip->base + SA1111_INTC; - stat0 = sa1111_readl(base + SA1111_INTSTATCLR0); - stat1 = sa1111_readl(base + SA1111_INTSTATCLR1); + stat0 = sa1111_readl(mapbase + SA1111_INTSTATCLR0); + stat1 = sa1111_readl(mapbase + SA1111_INTSTATCLR1); - sa1111_writel(stat0, base + SA1111_INTSTATCLR0); + sa1111_writel(stat0, mapbase + SA1111_INTSTATCLR0); desc->chip->ack(irq); - sa1111_writel(stat1, base + SA1111_INTSTATCLR1); + sa1111_writel(stat1, mapbase + SA1111_INTSTATCLR1); if (stat0 == 0 && stat1 == 0) { do_bad_IRQ(irq, desc); return; } - for (i = IRQ_SA1111_START; stat0; i++, stat0 >>= 1) + for (i = 0; stat0; i++, stat0 >>= 1) if (stat0 & 1) - handle_edge_irq(i, irq_desc + i); + generic_handle_irq(i + sachip->irq_base); - for (i = IRQ_SA1111_START + 32; stat1; i++, stat1 >>= 1) + for (i = 32; stat1; i++, stat1 >>= 1) if (stat1 & 1) - handle_edge_irq(i, irq_desc + i); + generic_handle_irq(i + sachip->irq_base); /* For level-based interrupts */ desc->chip->unmask(irq); } -#define SA1111_IRQMASK_LO(x) (1 << (x - IRQ_SA1111_START)) -#define SA1111_IRQMASK_HI(x) (1 << (x - IRQ_SA1111_START - 32)) +#define SA1111_IRQMASK_LO(x) (1 << (x - sachip->irq_base)) +#define SA1111_IRQMASK_HI(x) (1 << (x - sachip->irq_base - 32)) static void sa1111_ack_irq(unsigned int irq) { @@ -189,7 +243,8 @@ static void sa1111_ack_irq(unsigned int irq) static void sa1111_mask_lowirq(unsigned int irq) { - void __iomem *mapbase = get_irq_chip_data(irq); + struct sa1111 *sachip = get_irq_chip_data(irq); + void __iomem *mapbase = sachip->base + SA1111_INTC; unsigned long ie0; ie0 = sa1111_readl(mapbase + SA1111_INTEN0); @@ -199,7 +254,8 @@ static void sa1111_mask_lowirq(unsigned int irq) static void sa1111_unmask_lowirq(unsigned int irq) { - void __iomem *mapbase = get_irq_chip_data(irq); + struct sa1111 *sachip = get_irq_chip_data(irq); + void __iomem *mapbase = sachip->base + SA1111_INTC; unsigned long ie0; ie0 = sa1111_readl(mapbase + SA1111_INTEN0); @@ -216,8 +272,9 @@ static void sa1111_unmask_lowirq(unsigned int irq) */ static int sa1111_retrigger_lowirq(unsigned int irq) { + struct sa1111 *sachip = get_irq_chip_data(irq); + void __iomem *mapbase = sachip->base + SA1111_INTC; unsigned int mask = SA1111_IRQMASK_LO(irq); - void __iomem *mapbase = get_irq_chip_data(irq); unsigned long ip0; int i; @@ -237,8 +294,9 @@ static int sa1111_retrigger_lowirq(unsigned int irq) static int sa1111_type_lowirq(unsigned int irq, unsigned int flags) { + struct sa1111 *sachip = get_irq_chip_data(irq); + void __iomem *mapbase = sachip->base + SA1111_INTC; unsigned int mask = SA1111_IRQMASK_LO(irq); - void __iomem *mapbase = get_irq_chip_data(irq); unsigned long ip0; if (flags == IRQ_TYPE_PROBE) @@ -260,8 +318,9 @@ static int sa1111_type_lowirq(unsigned int irq, unsigned int flags) static int sa1111_wake_lowirq(unsigned int irq, unsigned int on) { + struct sa1111 *sachip = get_irq_chip_data(irq); + void __iomem *mapbase = sachip->base + SA1111_INTC; unsigned int mask = SA1111_IRQMASK_LO(irq); - void __iomem *mapbase = get_irq_chip_data(irq); unsigned long we0; we0 = sa1111_readl(mapbase + SA1111_WAKEEN0); @@ -286,7 +345,8 @@ static struct irq_chip sa1111_low_chip = { static void sa1111_mask_highirq(unsigned int irq) { - void __iomem *mapbase = get_irq_chip_data(irq); + struct sa1111 *sachip = get_irq_chip_data(irq); + void __iomem *mapbase = sachip->base + SA1111_INTC; unsigned long ie1; ie1 = sa1111_readl(mapbase + SA1111_INTEN1); @@ -296,7 +356,8 @@ static void sa1111_mask_highirq(unsigned int irq) static void sa1111_unmask_highirq(unsigned int irq) { - void __iomem *mapbase = get_irq_chip_data(irq); + struct sa1111 *sachip = get_irq_chip_data(irq); + void __iomem *mapbase = sachip->base + SA1111_INTC; unsigned long ie1; ie1 = sa1111_readl(mapbase + SA1111_INTEN1); @@ -313,8 +374,9 @@ static void sa1111_unmask_highirq(unsigned int irq) */ static int sa1111_retrigger_highirq(unsigned int irq) { + struct sa1111 *sachip = get_irq_chip_data(irq); + void __iomem *mapbase = sachip->base + SA1111_INTC; unsigned int mask = SA1111_IRQMASK_HI(irq); - void __iomem *mapbase = get_irq_chip_data(irq); unsigned long ip1; int i; @@ -334,8 +396,9 @@ static int sa1111_retrigger_highirq(unsigned int irq) static int sa1111_type_highirq(unsigned int irq, unsigned int flags) { + struct sa1111 *sachip = get_irq_chip_data(irq); + void __iomem *mapbase = sachip->base + SA1111_INTC; unsigned int mask = SA1111_IRQMASK_HI(irq); - void __iomem *mapbase = get_irq_chip_data(irq); unsigned long ip1; if (flags == IRQ_TYPE_PROBE) @@ -357,8 +420,9 @@ static int sa1111_type_highirq(unsigned int irq, unsigned int flags) static int sa1111_wake_highirq(unsigned int irq, unsigned int on) { + struct sa1111 *sachip = get_irq_chip_data(irq); + void __iomem *mapbase = sachip->base + SA1111_INTC; unsigned int mask = SA1111_IRQMASK_HI(irq); - void __iomem *mapbase = get_irq_chip_data(irq); unsigned long we1; we1 = sa1111_readl(mapbase + SA1111_WAKEEN1); @@ -412,14 +476,14 @@ static void sa1111_setup_irq(struct sa1111 *sachip) for (irq = IRQ_GPAIN0; irq <= SSPROR; irq++) { set_irq_chip(irq, &sa1111_low_chip); - set_irq_chip_data(irq, irqbase); + set_irq_chip_data(irq, sachip); set_irq_handler(irq, handle_edge_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } for (irq = AUDXMTDMADONEA; irq <= IRQ_S1_BVD1_STSCHG; irq++) { set_irq_chip(irq, &sa1111_high_chip); - set_irq_chip_data(irq, irqbase); + set_irq_chip_data(irq, sachip); set_irq_handler(irq, handle_edge_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } @@ -428,7 +492,7 @@ static void sa1111_setup_irq(struct sa1111 *sachip) * Register SA1111 interrupt */ set_irq_type(sachip->irq, IRQ_TYPE_EDGE_RISING); - set_irq_data(sachip->irq, irqbase); + set_irq_data(sachip->irq, sachip); set_irq_chained_handler(sachip->irq, sa1111_irq_handler); } diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c index 37bda5f3dde..9012004321d 100644 --- a/arch/arm/common/scoop.c +++ b/arch/arm/common/scoop.c @@ -140,6 +140,7 @@ EXPORT_SYMBOL(reset_scoop); EXPORT_SYMBOL(read_scoop_reg); EXPORT_SYMBOL(write_scoop_reg); +#ifdef CONFIG_PM static void check_scoop_reg(struct scoop_dev *sdev) { unsigned short mcr; @@ -149,7 +150,6 @@ static void check_scoop_reg(struct scoop_dev *sdev) iowrite16(0x0101, sdev->base + SCOOP_MCR); } -#ifdef CONFIG_PM static int scoop_suspend(struct platform_device *dev, pm_message_t state) { struct scoop_dev *sdev = platform_get_drvdata(dev); diff --git a/arch/arm/configs/ap4evb_defconfig b/arch/arm/configs/ap4evb_defconfig new file mode 100644 index 00000000000..e14229be767 --- /dev/null +++ b/arch/arm/configs/ap4evb_defconfig @@ -0,0 +1,779 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.33-rc7 +# Mon Feb 8 12:25:36 2010 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_LZO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_BSD_PROCESS_ACCT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_RD_LZO=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +# CONFIG_MODULES is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set +# CONFIG_FREEZER is not set + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_DOVE is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +CONFIG_ARCH_SHMOBILE=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_BCMRING is not set +# CONFIG_ARCH_U8500 is not set + +# +# SH-Mobile System Type +# +# CONFIG_ARCH_SH7367 is not set +# CONFIG_ARCH_SH7377 is not set +CONFIG_ARCH_SH7372=y + +# +# SH-Mobile Board Type +# +CONFIG_MACH_AP4EVB=y + +# +# SH-Mobile System Configuration +# + +# +# Memory configuration +# +CONFIG_MEMORY_START=0x40000000 +CONFIG_MEMORY_SIZE=0x10000000 + +# +# Timer and clock configuration +# +CONFIG_SH_TIMER_CMT=y + +# +# Processor Type +# +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_V7=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_ARM_THUMBEE is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +CONFIG_ARM_L1_CACHE_SHIFT=5 +# CONFIG_ARM_ERRATA_430973 is not set +# CONFIG_ARM_ERRATA_458693 is not set +# CONFIG_ARM_ERRATA_460075 is not set +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_HZ=100 +# CONFIG_THUMB2_KERNEL is not set +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=sh-sci.0,115200" +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +# CONFIG_SUSPEND is not set +# CONFIG_APM_EMULATION is not set +# CONFIG_PM_RUNTIME is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_NET is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +# CONFIG_BLK_DEV is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=8 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +# CONFIG_FSNOTIFY is not set +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +# CONFIG_INOTIFY_USER is not set +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +# CONFIG_MISC_FILESYSTEMS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +# CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_DETECT_HUNG_TASK is not set +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set +# CONFIG_OC_ETM is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +# CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +# CONFIG_CRC32 is not set +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_DECOMPRESS_LZO=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/g3evm_defconfig b/arch/arm/configs/g3evm_defconfig new file mode 100644 index 00000000000..3c19031961d --- /dev/null +++ b/arch/arm/configs/g3evm_defconfig @@ -0,0 +1,774 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.33-rc7 +# Mon Feb 8 12:20:01 2010 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_LZO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_BSD_PROCESS_ACCT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_RD_LZO=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +# CONFIG_MODULES is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set +# CONFIG_FREEZER is not set + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_DOVE is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +CONFIG_ARCH_SHMOBILE=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_BCMRING is not set +# CONFIG_ARCH_U8500 is not set + +# +# SH-Mobile System Type +# +CONFIG_ARCH_SH7367=y +# CONFIG_ARCH_SH7377 is not set +# CONFIG_ARCH_SH7372 is not set + +# +# SH-Mobile Board Type +# +CONFIG_MACH_G3EVM=y + +# +# SH-Mobile System Configuration +# + +# +# Memory configuration +# +CONFIG_MEMORY_START=0x50000000 +CONFIG_MEMORY_SIZE=0x08000000 + +# +# Timer and clock configuration +# +CONFIG_SH_TIMER_CMT=y + +# +# Processor Type +# +CONFIG_CPU_V6=y +# CONFIG_CPU_32v6K is not set +CONFIG_CPU_32v6=y +CONFIG_CPU_ABRT_EV6=y +CONFIG_CPU_PABRT_V6=y +CONFIG_CPU_CACHE_V6=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V6=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 +# CONFIG_ARM_ERRATA_411920 is not set +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_HZ=100 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttySC1,115200 earlyprintk=sh-sci.1,115200" +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +# CONFIG_SUSPEND is not set +# CONFIG_APM_EMULATION is not set +# CONFIG_PM_RUNTIME is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_NET is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +# CONFIG_BLK_DEV is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=8 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +# CONFIG_FSNOTIFY is not set +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +# CONFIG_INOTIFY_USER is not set +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +# CONFIG_MISC_FILESYSTEMS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +# CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_DETECT_HUNG_TASK is not set +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set +# CONFIG_OC_ETM is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +# CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +# CONFIG_CRC32 is not set +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_DECOMPRESS_LZO=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/g4evm_defconfig b/arch/arm/configs/g4evm_defconfig new file mode 100644 index 00000000000..8ee79a53713 --- /dev/null +++ b/arch/arm/configs/g4evm_defconfig @@ -0,0 +1,779 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.33-rc7 +# Mon Feb 8 12:21:35 2010 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_LZO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_BSD_PROCESS_ACCT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_RD_LZO=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +# CONFIG_MODULES is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set +# CONFIG_FREEZER is not set + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_DOVE is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +CONFIG_ARCH_SHMOBILE=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_BCMRING is not set +# CONFIG_ARCH_U8500 is not set + +# +# SH-Mobile System Type +# +# CONFIG_ARCH_SH7367 is not set +CONFIG_ARCH_SH7377=y +# CONFIG_ARCH_SH7372 is not set + +# +# SH-Mobile Board Type +# +CONFIG_MACH_G4EVM=y + +# +# SH-Mobile System Configuration +# + +# +# Memory configuration +# +CONFIG_MEMORY_START=0x40000000 +CONFIG_MEMORY_SIZE=0x08000000 + +# +# Timer and clock configuration +# +CONFIG_SH_TIMER_CMT=y + +# +# Processor Type +# +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_V7=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_ARM_THUMBEE is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +CONFIG_ARM_L1_CACHE_SHIFT=5 +# CONFIG_ARM_ERRATA_430973 is not set +# CONFIG_ARM_ERRATA_458693 is not set +# CONFIG_ARM_ERRATA_460075 is not set +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_HZ=100 +# CONFIG_THUMB2_KERNEL is not set +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttySC4,115200 earlyprintk=sh-sci.4,115200" +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +# CONFIG_SUSPEND is not set +# CONFIG_APM_EMULATION is not set +# CONFIG_PM_RUNTIME is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_NET is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +# CONFIG_BLK_DEV is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=8 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +# CONFIG_FSNOTIFY is not set +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +# CONFIG_INOTIFY_USER is not set +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +# CONFIG_MISC_FILESYSTEMS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +# CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_DETECT_HUNG_TASK is not set +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set +# CONFIG_OC_ETM is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +# CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +# CONFIG_CRC32 is not set +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_DECOMPRESS_LZO=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/imote2_defconfig b/arch/arm/configs/imote2_defconfig new file mode 100644 index 00000000000..95d2becfc66 --- /dev/null +++ b/arch/arm/configs/imote2_defconfig @@ -0,0 +1,2077 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.33-rc8 +# Sat Feb 13 21:48:53 2010 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_ARCH_HAS_CPUFREQ=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_LZO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +# CONFIG_RD_LZO is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_COMPAT_BRK is not set +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +CONFIG_SLOW_WORK=y +# CONFIG_SLOW_WORK_DEBUG is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +# CONFIG_LBDAF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="deadline" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set +CONFIG_FREEZER=y + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_DOVE is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_BCMRING is not set +# CONFIG_ARCH_U8500 is not set + +# +# Intel PXA2xx/PXA3xx Implementations +# + +# +# Intel/Marvell Dev Platforms (sorted by hardware release time) +# +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_MACH_ZYLONITE300 is not set +# CONFIG_MACH_ZYLONITE320 is not set +# CONFIG_MACH_LITTLETON is not set +# CONFIG_MACH_TAVOREVB is not set +# CONFIG_MACH_SAAR is not set + +# +# Third Party Dev Platforms (sorted by vendor name) +# +# CONFIG_ARCH_PXA_IDP is not set +# CONFIG_ARCH_VIPER is not set +# CONFIG_MACH_ARCOM_ZEUS is not set +# CONFIG_MACH_BALLOON3 is not set +# CONFIG_MACH_CSB726 is not set +# CONFIG_MACH_ARMCORE is not set +# CONFIG_MACH_EM_X270 is not set +# CONFIG_MACH_EXEDA is not set +# CONFIG_MACH_CM_X300 is not set +# CONFIG_ARCH_GUMSTIX is not set +CONFIG_MACH_INTELMOTE2=y +# CONFIG_MACH_STARGATE2 is not set +# CONFIG_MACH_XCEP is not set +# CONFIG_TRIZEPS_PXA is not set +# CONFIG_MACH_LOGICPD_PXA270 is not set +# CONFIG_MACH_PCM027 is not set +# CONFIG_MACH_COLIBRI is not set +# CONFIG_MACH_COLIBRI300 is not set +# CONFIG_MACH_COLIBRI320 is not set + +# +# End-user Products (sorted by vendor name) +# +# CONFIG_MACH_H4700 is not set +# CONFIG_MACH_H5000 is not set +# CONFIG_MACH_HIMALAYA is not set +# CONFIG_MACH_MAGICIAN is not set +# CONFIG_MACH_MIOA701 is not set +# CONFIG_PXA_EZX is not set +# CONFIG_MACH_MP900C is not set +# CONFIG_ARCH_PXA_PALM is not set +# CONFIG_PXA_SHARPSL is not set +# CONFIG_ARCH_PXA_ESERIES is not set +CONFIG_PXA27x=y +CONFIG_PXA_SSP=y +CONFIG_PXA_HAVE_BOARD_IRQS=y +CONFIG_PLAT_PXA=y + +# +# Processor Type +# +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_PABRT_LEGACY=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_DCACHE_DISABLE is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 +CONFIG_IWMMXT=y +CONFIG_XSCALE_PMU=y +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=999999 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=3 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug" +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y + +# +# CPU Power Management +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +CONFIG_CPU_FREQ_DEBUG=y +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=m +CONFIG_CPU_FREQ_GOV_USERSPACE=m +CONFIG_CPU_FREQ_GOV_ONDEMAND=m +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_LADDER=y +CONFIG_CPU_IDLE_GOV_MENU=y + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=m + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_APM_EMULATION=y +CONFIG_PM_RUNTIME=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_MIP6=m +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +# CONFIG_IPV6_SIT_6RD is not set +CONFIG_IPV6_NDISC_NODETYPE=y +CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_IPV6_SUBTREES=y +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y +CONFIG_BRIDGE_NETFILTER=y + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_EVENTS=y +# CONFIG_NF_CT_PROTO_DCCP is not set +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m +# CONFIG_NETFILTER_TPROXY is not set +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +CONFIG_NETFILTER_XT_TARGET_HL=m +CONFIG_NETFILTER_XT_TARGET_LED=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set +# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set +# CONFIG_NETFILTER_XT_TARGET_TRACE is not set +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set +# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m +# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +# CONFIG_NETFILTER_XT_MATCH_OWNER is not set +CONFIG_NETFILTER_XT_MATCH_POLICY=m +# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set +CONFIG_NETFILTER_XT_MATCH_REALM=m +# CONFIG_NETFILTER_XT_MATCH_RECENT is not set +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_TIME=m +CONFIG_NETFILTER_XT_MATCH_U32=m +# CONFIG_NETFILTER_XT_MATCH_OSF is not set +# CONFIG_IP_VS is not set + +# +# IP: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV4=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_PROTO_UDPLITE=m +CONFIG_NF_NAT_PROTO_SCTP=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_NF_NAT_SIP=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV6=m +CONFIG_IP6_NF_QUEUE=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m +CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_RAW=m +# CONFIG_BRIDGE_NF_EBTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +CONFIG_STP=m +CONFIG_BRIDGE=m +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +CONFIG_IEEE802154=y +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +CONFIG_BT=y +CONFIG_BT_L2CAP=y +CONFIG_BT_SCO=y +CONFIG_BT_RFCOMM=y +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=y +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=y + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIBTUSB=m +CONFIG_BT_HCIBTSDIO=m +CONFIG_BT_HCIUART=y +CONFIG_BT_HCIUART_H4=y +# CONFIG_BT_HCIUART_BCSP is not set +# CONFIG_BT_HCIUART_LL is not set +CONFIG_BT_HCIBCM203X=m +CONFIG_BT_HCIBPA10X=m +CONFIG_BT_HCIBFUSB=m +CONFIG_BT_HCIVHCI=m +CONFIG_BT_MRVL=m +CONFIG_BT_MRVL_SDIO=m +# CONFIG_BT_ATH3K is not set +# CONFIG_AF_RXRPC is not set +CONFIG_FIB_RULES=y +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=m +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_HAVE_MTD_OTP=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +# CONFIG_MTD_CFI_I2 is not set +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_OTP=y +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_XIP is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PXA2XX=y +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +CONFIG_BLK_DEV_CRYPTOLOOP=m +# CONFIG_BLK_DEV_DRBD is not set +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MG_DISK is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +CONFIG_DUMMY=y +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_NET_ETHERNET is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_WLAN is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +CONFIG_IEEE802154_DRIVERS=y +# CONFIG_IEEE802154_FAKEHARD is not set +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set +# CONFIG_INPUT_APMPOWER is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_QT2160 is not set +# CONFIG_KEYBOARD_LKKBD is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_MAX7359 is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set +CONFIG_KEYBOARD_PXA27x=y +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_AD7877 is not set +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879_SPI is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +CONFIG_TOUCHSCREEN_DA9034=y +# CONFIG_TOUCHSCREEN_DYNAPRO is not set +# CONFIG_TOUCHSCREEN_EETI is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MCS5000 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_TOUCHSCREEN_W90X900 is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set +CONFIG_INPUT_UINPUT=y +# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_MAX3100 is not set +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=8 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_DESIGNWARE is not set +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_PXA=y +# CONFIG_I2C_PXA_SLAVE is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set +CONFIG_SPI_PXA2XX=y +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_DESIGNWARE is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_ADP5588 is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# AC97 GPIO expanders: +# +# CONFIG_W1 is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_APM_POWER is not set +# CONFIG_BATTERY_DS2760 is not set +# CONFIG_BATTERY_DS2782 is not set +# CONFIG_BATTERY_BQ27x00 is not set +# CONFIG_BATTERY_DA9030 is not set +# CONFIG_BATTERY_MAX17040 is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +CONFIG_PMIC_DA903X=y +# CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set +# CONFIG_MFD_88PM8607 is not set +# CONFIG_AB4500_CORE is not set +CONFIG_REGULATOR=y +CONFIG_REGULATOR_DEBUG=y +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +CONFIG_REGULATOR_VIRTUAL_CONSUMER=y +CONFIG_REGULATOR_USERSPACE_CONSUMER=y +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_REGULATOR_MAX1586 is not set +# CONFIG_REGULATOR_MAX8660 is not set +CONFIG_REGULATOR_DA903X=y +# CONFIG_REGULATOR_LP3971 is not set +# CONFIG_REGULATOR_TPS65023 is not set +# CONFIG_REGULATOR_TPS6507X is not set +CONFIG_MEDIA_SUPPORT=y + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L2_COMMON=y +CONFIG_VIDEO_ALLOW_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=y + +# +# Multimedia drivers +# +CONFIG_IR_CORE=y +CONFIG_VIDEO_IR=y +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=y +CONFIG_MEDIA_TUNER_CUSTOMISE=y +# CONFIG_MEDIA_TUNER_SIMPLE is not set +# CONFIG_MEDIA_TUNER_TDA8290 is not set +# CONFIG_MEDIA_TUNER_TDA827X is not set +# CONFIG_MEDIA_TUNER_TDA18271 is not set +# CONFIG_MEDIA_TUNER_TDA9887 is not set +# CONFIG_MEDIA_TUNER_TEA5761 is not set +# CONFIG_MEDIA_TUNER_TEA5767 is not set +# CONFIG_MEDIA_TUNER_MT20XX is not set +# CONFIG_MEDIA_TUNER_MT2060 is not set +# CONFIG_MEDIA_TUNER_MT2266 is not set +# CONFIG_MEDIA_TUNER_MT2131 is not set +# CONFIG_MEDIA_TUNER_QT1010 is not set +# CONFIG_MEDIA_TUNER_XC2028 is not set +# CONFIG_MEDIA_TUNER_XC5000 is not set +# CONFIG_MEDIA_TUNER_MXL5005S is not set +# CONFIG_MEDIA_TUNER_MXL5007T is not set +# CONFIG_MEDIA_TUNER_MC44S803 is not set +CONFIG_MEDIA_TUNER_MAX2165=m +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_V4L1=y +CONFIG_VIDEOBUF_GEN=y +CONFIG_VIDEOBUF_DMA_SG=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set +CONFIG_VIDEO_IR_I2C=y + +# +# Encoders/decoders and other helper chips +# + +# +# Audio decoders +# +# CONFIG_VIDEO_TVAUDIO is not set +# CONFIG_VIDEO_TDA7432 is not set +# CONFIG_VIDEO_TDA9840 is not set +# CONFIG_VIDEO_TDA9875 is not set +# CONFIG_VIDEO_TEA6415C is not set +# CONFIG_VIDEO_TEA6420 is not set +# CONFIG_VIDEO_MSP3400 is not set +# CONFIG_VIDEO_CS5345 is not set +# CONFIG_VIDEO_CS53L32A is not set +# CONFIG_VIDEO_M52790 is not set +# CONFIG_VIDEO_TLV320AIC23B is not set +# CONFIG_VIDEO_WM8775 is not set +# CONFIG_VIDEO_WM8739 is not set +# CONFIG_VIDEO_VP27SMPX is not set + +# +# RDS decoders +# +# CONFIG_VIDEO_SAA6588 is not set + +# +# Video decoders +# +# CONFIG_VIDEO_ADV7180 is not set +# CONFIG_VIDEO_BT819 is not set +# CONFIG_VIDEO_BT856 is not set +# CONFIG_VIDEO_BT866 is not set +# CONFIG_VIDEO_KS0127 is not set +# CONFIG_VIDEO_OV7670 is not set +# CONFIG_VIDEO_MT9V011 is not set +# CONFIG_VIDEO_TCM825X is not set +# CONFIG_VIDEO_SAA7110 is not set +# CONFIG_VIDEO_SAA711X is not set +# CONFIG_VIDEO_SAA717X is not set +# CONFIG_VIDEO_SAA7191 is not set +# CONFIG_VIDEO_TVP514X is not set +# CONFIG_VIDEO_TVP5150 is not set +# CONFIG_VIDEO_VPX3220 is not set + +# +# Video and audio decoders +# +# CONFIG_VIDEO_CX25840 is not set + +# +# MPEG video encoders +# +# CONFIG_VIDEO_CX2341X is not set + +# +# Video encoders +# +# CONFIG_VIDEO_SAA7127 is not set +# CONFIG_VIDEO_SAA7185 is not set +# CONFIG_VIDEO_ADV7170 is not set +# CONFIG_VIDEO_ADV7175 is not set +# CONFIG_VIDEO_THS7303 is not set +# CONFIG_VIDEO_ADV7343 is not set + +# +# Video improvement chips +# +# CONFIG_VIDEO_UPD64031A is not set +# CONFIG_VIDEO_UPD64083 is not set +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_CPIA2 is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +CONFIG_SOC_CAMERA=y +# CONFIG_SOC_CAMERA_MT9M001 is not set +CONFIG_SOC_CAMERA_MT9M111=y +# CONFIG_SOC_CAMERA_MT9T031 is not set +# CONFIG_SOC_CAMERA_MT9T112 is not set +# CONFIG_SOC_CAMERA_MT9V022 is not set +# CONFIG_SOC_CAMERA_RJ54N1 is not set +# CONFIG_SOC_CAMERA_TW9910 is not set +# CONFIG_SOC_CAMERA_PLATFORM is not set +# CONFIG_SOC_CAMERA_OV772X is not set +# CONFIG_SOC_CAMERA_OV9640 is not set +CONFIG_VIDEO_PXA27x=y +# CONFIG_VIDEO_SH_MOBILE_CEU is not set +# CONFIG_V4L_USB_DRIVERS is not set +CONFIG_RADIO_ADAPTERS=y +# CONFIG_I2C_SI4713 is not set +# CONFIG_RADIO_SI4713 is not set +# CONFIG_USB_DSBR is not set +# CONFIG_RADIO_SI470X is not set +# CONFIG_USB_MR800 is not set +CONFIG_RADIO_TEA5764=y +CONFIG_RADIO_TEA5764_XTAL=y +# CONFIG_RADIO_TEF6862 is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_UVESA is not set +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_PXA=y +CONFIG_FB_PXA_OVERLAY=y +# CONFIG_FB_PXA_SMARTPANEL is not set +CONFIG_FB_PXA_PARAMETERS=y +# CONFIG_FB_MBX is not set +# CONFIG_FB_W100 is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=y +# CONFIG_BACKLIGHT_DA903X is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +CONFIG_FONT_MINI_4x6=y +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +# CONFIG_LOGO is not set +CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_JACK=y +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_HRTIMER is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_ARM is not set +CONFIG_SND_PXA2XX_LIB=y +# CONFIG_SND_SPI is not set +# CONFIG_SND_USB is not set +CONFIG_SND_SOC=y +CONFIG_SND_PXA2XX_SOC=y +# CONFIG_SND_PXA2XX_SOC_IMOTE2 is not set +CONFIG_SND_SOC_I2C_AND_SPI=y +# CONFIG_SND_SOC_ALL_CODECS is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set +# CONFIG_HID_PID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set + +# +# Special HID drivers +# +CONFIG_HID_APPLE=m +# CONFIG_HID_WACOM is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_R8A66597 is not set +CONFIG_USB_GADGET_PXA27X=y +CONFIG_USB_PXA27X=y +# CONFIG_USB_GADGET_S3C_HSOTG is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LANGWELL is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +# CONFIG_USB_AUDIO is not set +CONFIG_USB_ETH=y +# CONFIG_USB_ETH_RNDIS is not set +# CONFIG_USB_ETH_EEM is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_MASS_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set +# CONFIG_USB_G_MULTI is not set + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_USB_ULPI is not set +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_UNSAFE_RESUME=y + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +CONFIG_SDIO_UART=m +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +CONFIG_MMC_PXA=y +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_ATMELMCI is not set +CONFIG_MMC_SPI=y +# CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_PCA9532 is not set +# CONFIG_LEDS_GPIO is not set +CONFIG_LEDS_LP3944=y +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_DA903X is not set +# CONFIG_LEDS_DAC124S085 is not set +# CONFIG_LEDS_REGULATOR is not set +# CONFIG_LEDS_BD2802 is not set +# CONFIG_LEDS_LT3593 is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_BACKLIGHT=y +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y + +# +# iptables trigger is under Netfilter config (LED target) +# +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_DRV_SA1100 is not set +# CONFIG_RTC_DRV_PXA is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=m +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=m +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=m +CONFIG_REISERFS_FS=m +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_XFS_FS=m +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set +# CONFIG_XFS_DEBUG is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_AUTOFS_FS=y +CONFIG_AUTOFS4_FS=y +CONFIG_FUSE_FS=m +CONFIG_CUSE=m + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=m +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=m +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_MTD is not set +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_BLOCK=y +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +# CONFIG_NFS_V4 is not set +# CONFIG_ROOT_NFS is not set +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +# CONFIG_NFSD_V4 is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +CONFIG_CIFS=m +CONFIG_CIFS_STATS=y +# CONFIG_CIFS_STATS2 is not set +CONFIG_CIFS_WEAK_PW_HASH=y +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_KMEMLEAK is not set +CONFIG_DEBUG_PREEMPT=y +CONFIG_DEBUG_RT_MUTEXES=y +CONFIG_DEBUG_PI_LIST=y +# CONFIG_RT_MUTEX_TESTER is not set +CONFIG_DEBUG_SPINLOCK=y +CONFIG_DEBUG_MUTEXES=y +CONFIG_DEBUG_LOCK_ALLOC=y +CONFIG_PROVE_LOCKING=y +CONFIG_LOCKDEP=y +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_LOCKDEP is not set +CONFIG_TRACE_IRQFLAGS=y +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set +# CONFIG_OC_ETM is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_ALGAPI2=m +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=m +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER2=m +CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_HASH2=m +CONFIG_CRYPTO_RNG2=m +CONFIG_CRYPTO_PCOMP=m +CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_MANAGER2=m +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=m +CONFIG_CRYPTO_CRYPTD=m +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=m +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_XTS=m + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=m +CONFIG_CRYPTO_XCBC=m +CONFIG_CRYPTO_VMAC=m + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_GHASH=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_MICHAEL_MIC=m +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_TGR192=m +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=m +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_BLOWFISH=m +# CONFIG_CRYPTO_CAMELLIA is not set +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_KHAZAD=m +# CONFIG_CRYPTO_SALSA20 is not set +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=m +CONFIG_CRC16=y +# CONFIG_CRC_T10DIF is not set +CONFIG_CRC_ITU_T=y +CONFIG_CRC32=y +CONFIG_CRC7=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_LZO_COMPRESS=m +CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig index 5fc44c94b0a..4611d3ce451 100644 --- a/arch/arm/configs/kirkwood_defconfig +++ b/arch/arm/configs/kirkwood_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc6 -# Sat Nov 7 20:31:18 2009 +# Linux kernel version: 2.6.33-rc6 +# Thu Feb 4 23:08:54 2010 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -32,6 +32,12 @@ CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_LZO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y @@ -45,6 +51,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -127,14 +134,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -163,6 +197,7 @@ CONFIG_MMU=y # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_DOVE is not set CONFIG_ARCH_KIRKWOOD=y # CONFIG_ARCH_LOKI is not set # CONFIG_ARCH_MV78XX0 is not set @@ -185,6 +220,7 @@ CONFIG_ARCH_KIRKWOOD=y # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set # CONFIG_ARCH_BCMRING is not set +# CONFIG_ARCH_U8500 is not set # # Marvell Kirkwood Implementations @@ -195,7 +231,11 @@ CONFIG_MACH_RD88F6281=y CONFIG_MACH_MV88F6281GTW_GE=y CONFIG_MACH_SHEEVAPLUG=y CONFIG_MACH_TS219=y +CONFIG_MACH_TS41X=y +CONFIG_MACH_OPENRD=y CONFIG_MACH_OPENRD_BASE=y +CONFIG_MACH_OPENRD_CLIENT=y +CONFIG_MACH_NETSPACE_V2=y CONFIG_PLAT_ORION=y # @@ -262,12 +302,10 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4096 +CONFIG_SPLIT_PTLOCK_CPUS=999999 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ALIGNMENT_TRAP=y @@ -398,15 +436,18 @@ CONFIG_NET_PKTGEN=m # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y +CONFIG_WIRELESS_EXT=y +CONFIG_WEXT_CORE=y +CONFIG_WEXT_PROC=y +CONFIG_WEXT_SPY=y CONFIG_CFG80211=y # CONFIG_NL80211_TESTMODE is not set # CONFIG_CFG80211_DEVELOPER_WARNINGS is not set # CONFIG_CFG80211_REG_DEBUG is not set CONFIG_CFG80211_DEFAULT_PS=y -CONFIG_CFG80211_DEFAULT_PS_VALUE=1 # CONFIG_CFG80211_DEBUGFS is not set CONFIG_WIRELESS_OLD_REGULATORY=y -CONFIG_WIRELESS_EXT=y +CONFIG_CFG80211_WEXT=y CONFIG_WIRELESS_EXT_SYSFS=y CONFIG_LIB80211=y # CONFIG_LIB80211_DEBUG is not set @@ -556,6 +597,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set @@ -606,7 +651,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set @@ -642,6 +689,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set @@ -696,15 +744,16 @@ CONFIG_SATA_MV=y # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set +# CONFIG_PATA_TOSHIBA is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_SCH is not set @@ -720,7 +769,7 @@ CONFIG_SATA_MV=y # # -# See the help texts for more information. +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -828,13 +877,6 @@ CONFIG_MV643XX_ETH=y # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -CONFIG_WLAN_80211=y -CONFIG_LIBERTAS=y -# CONFIG_LIBERTAS_USB is not set -CONFIG_LIBERTAS_SDIO=y -# CONFIG_LIBERTAS_SPI is not set -# CONFIG_LIBERTAS_DEBUG is not set # CONFIG_LIBERTAS_THINFIRM is not set # CONFIG_ATMEL is not set # CONFIG_AT76C50X_USB is not set @@ -846,19 +888,24 @@ CONFIG_LIBERTAS_SDIO=y # CONFIG_ADM8211 is not set # CONFIG_MAC80211_HWSIM is not set # CONFIG_MWL8K is not set -# CONFIG_P54_COMMON is not set # CONFIG_ATH_COMMON is not set +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +# CONFIG_HOSTAP is not set # CONFIG_IPW2100 is not set # CONFIG_IPW2200 is not set # CONFIG_IWLWIFI is not set -# CONFIG_HOSTAP is not set -# CONFIG_B43 is not set -# CONFIG_B43LEGACY is not set -# CONFIG_ZD1211RW is not set -# CONFIG_RT2X00 is not set +# CONFIG_IWM is not set +CONFIG_LIBERTAS=y +# CONFIG_LIBERTAS_USB is not set +CONFIG_LIBERTAS_SDIO=y +# CONFIG_LIBERTAS_SPI is not set +# CONFIG_LIBERTAS_DEBUG is not set # CONFIG_HERMES is not set +# CONFIG_P54_COMMON is not set +# CONFIG_RT2X00 is not set # CONFIG_WL12XX is not set -# CONFIG_IWM is not set +# CONFIG_ZD1211RW is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -881,6 +928,7 @@ CONFIG_LIBERTAS_SDIO=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -890,6 +938,7 @@ CONFIG_LIBERTAS_SDIO=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -933,6 +982,7 @@ CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_GAMEPORT is not set # @@ -1019,11 +1069,6 @@ CONFIG_I2C_MV64XXX=y # CONFIG_I2C_TINY_USB is not set # -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - -# # Other I2C/SMBus bus drivers # # CONFIG_I2C_PCA_PLATFORM is not set @@ -1032,7 +1077,6 @@ CONFIG_I2C_MV64XXX=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1048,6 +1092,8 @@ CONFIG_SPI_MASTER=y # CONFIG_SPI_BITBANG is not set # CONFIG_SPI_GPIO is not set CONFIG_SPI_ORION=y +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_DESIGNWARE is not set # # SPI Protocol Masters @@ -1074,10 +1120,12 @@ CONFIG_GPIO_SYSFS=y # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_ADP5588 is not set # # PCI GPIO expanders: # +# CONFIG_GPIO_CS5535 is not set # CONFIG_GPIO_BT8XX is not set # CONFIG_GPIO_LANGWELL is not set @@ -1116,6 +1164,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_MFD_TC6393XB is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set @@ -1123,6 +1172,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set +# CONFIG_MFD_88PM8607 is not set +# CONFIG_AB4500_CORE is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1305,6 +1356,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # OTG and related infrastructure # # CONFIG_USB_GPIO_VBUS is not set +# CONFIG_USB_ULPI is not set # CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set CONFIG_MMC=y @@ -1344,6 +1396,7 @@ CONFIG_LEDS_GPIO_PLATFORM=y # CONFIG_LEDS_PCA955X is not set # CONFIG_LEDS_DAC124S085 is not set # CONFIG_LEDS_BD2802 is not set +# CONFIG_LEDS_LT3593 is not set # # LED Triggers @@ -1388,6 +1441,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set CONFIG_RTC_DRV_S35390A=y # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -1417,7 +1471,9 @@ CONFIG_RTC_DRV_S35390A=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1684,7 +1740,9 @@ CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUG_LL=y +# CONFIG_EARLY_PRINTK is not set # CONFIG_DEBUG_ICEDCC is not set +# CONFIG_OC_ETM is not set # # Security options @@ -1692,7 +1750,11 @@ CONFIG_DEBUG_LL=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig index d2a90eb844a..ff44bd1615c 100644 --- a/arch/arm/configs/mini2440_defconfig +++ b/arch/arm/configs/mini2440_defconfig @@ -184,7 +184,7 @@ CONFIG_S3C24XX_PWM=y CONFIG_S3C24XX_GPIO_EXTRA=0 CONFIG_S3C2410_DMA=y # CONFIG_S3C2410_DMA_DEBUG is not set -CONFIG_S3C24XX_ADC=y +CONFIG_S3C_ADC=y CONFIG_PLAT_S3C=y CONFIG_CPU_LLSERIAL_S3C2440_ONLY=y CONFIG_CPU_LLSERIAL_S3C2440=y @@ -199,8 +199,8 @@ CONFIG_S3C_BOOT_UART_FORCE_FIFO=y # # Power management # -# CONFIG_S3C2410_PM_DEBUG is not set -# CONFIG_S3C2410_PM_CHECK is not set +# CONFIG_SAMSUNG_PM_DEBUG is not set +# CONFIG_SAMSUNG_PM_CHECK is not set CONFIG_S3C_LOWLEVEL_UART_PORT=0 CONFIG_S3C_GPIO_SPACE=0 diff --git a/arch/arm/configs/mmp2_defconfig b/arch/arm/configs/mmp2_defconfig new file mode 100644 index 00000000000..03f76cfc941 --- /dev/null +++ b/arch/arm/configs/mmp2_defconfig @@ -0,0 +1,1194 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.33-rc2 +# Tue Jan 5 13:55:22 2010 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set +# CONFIG_FREEZER is not set + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_DOVE is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +CONFIG_ARCH_MMP=y +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_BCMRING is not set +# CONFIG_ARCH_U8500 is not set +# CONFIG_MACH_TAVOREVB is not set + +# +# Marvell PXA168/910/MMP2 Implmentations +# +# CONFIG_MACH_ASPENITE is not set +# CONFIG_MACH_ZYLONITE2 is not set +# CONFIG_MACH_TTC_DKB is not set +CONFIG_MACH_FLINT=y +CONFIG_CPU_MMP2=y +CONFIG_PLAT_PXA=y + +# +# Processor Type +# +CONFIG_CPU_V6=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_32v6=y +CONFIG_CPU_ABRT_EV6=y +CONFIG_CPU_PABRT_V6=y +CONFIG_CPU_CACHE_V6=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V6=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 +# CONFIG_ARM_ERRATA_411920 is not set +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M user_debug=255" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set +CONFIG_VFP=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="" +# CONFIG_DEVTMPFS is not set +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +# CONFIG_MTD_CHAR is not set +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_PXA3xx is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +CONFIG_MTD_ONENAND=y +# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set +CONFIG_MTD_ONENAND_GENERIC=y +# CONFIG_MTD_ONENAND_OTP is not set +# CONFIG_MTD_ONENAND_2X_PROGRAM is not set +# CONFIG_MTD_ONENAND_SIM is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +# CONFIG_BLK_DEV is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +CONFIG_SMC91X=y +# CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +CONFIG_WLAN=y +# CONFIG_HOSTAP is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +# CONFIG_I2C_CHARDEV is not set +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_DESIGNWARE is not set +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_PXA=y +# CONFIG_I2C_PXA_SLAVE is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# + +# +# AC97 GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +CONFIG_MFD_CORE=y +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +CONFIG_MFD_88PM8607=y +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_REGULATOR_MAX1586 is not set +CONFIG_REGULATOR_MAX8660=y +# CONFIG_REGULATOR_LP3971 is not set +# CONFIG_REGULATOR_TPS65023 is not set +# CONFIG_REGULATOR_TPS6507X is not set +CONFIG_REGULATOR_88PM8607=y +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_PLATFORM is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=y + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +CONFIG_EXT4_USE_FOR_EXT23=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set +CONFIG_GENERIC_ACL=y + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +# CONFIG_EARLY_PRINTK is not set +# CONFIG_DEBUG_ICEDCC is not set +# CONFIG_OC_ETM is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig index 6afa2c108ea..da4710dd1da 100644 --- a/arch/arm/configs/mv78xx0_defconfig +++ b/arch/arm/configs/mv78xx0_defconfig @@ -176,6 +176,7 @@ CONFIG_ARCH_MV78XX0=y # CONFIG_MACH_DB78X00_BP=y CONFIG_MACH_RD78X00_MASA=y +CONFIG_MACH_TERASTATION_WXL=y CONFIG_PLAT_ORION=y # diff --git a/arch/arm/configs/mx1ads_defconfig b/arch/arm/configs/mx1ads_defconfig deleted file mode 100644 index 3cabbb6d927..00000000000 --- a/arch/arm/configs/mx1ads_defconfig +++ /dev/null @@ -1,742 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc1-bk2 -# Sun Mar 27 02:15:46 2005 -# -CONFIG_ARM=y -CONFIG_MMU=y -CONFIG_UID16=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_IOMAP=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_SYSCTL is not set -# CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -CONFIG_EMBEDDED=y -# CONFIG_KALLSYMS is not set -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# System Type -# -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_IOP3XX is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -CONFIG_ARCH_IMX=y -# CONFIG_ARCH_H720X is not set - -# -# IMX Implementations -# -CONFIG_ARCH_MX1ADS=y - -# -# Processor Type -# -CONFIG_CPU_ARM920T=y -CONFIG_CPU_32v4=y -CONFIG_CPU_ABRT_EV4T=y -CONFIG_CPU_CACHE_V4WT=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_COPY_V4WB=y -CONFIG_CPU_TLB_V4WBI=y - -# -# Processor Features -# -# CONFIG_ARM_THUMB is not set -# CONFIG_CPU_ICACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_WRITETHROUGH is not set - -# -# Bus support -# -CONFIG_ISA=y - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -CONFIG_PREEMPT=y -# CONFIG_LEDS is not set -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttySMX0,57600n8 ip=bootp root=/dev/nfs" -# CONFIG_XIP_KERNEL is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_FPE_NWFPE=y -CONFIG_FPE_NWFPE_XP=y -CONFIG_FPE_FASTFPE=y - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set -# CONFIG_ARTHUR is not set - -# -# Power management options -# -# CONFIG_PM is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set -# CONFIG_DEBUG_DRIVER is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_AFS_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set - -# -# RAM/ROM/Flash chip drivers -# -# CONFIG_MTD_CFI is not set -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_RAM is not set -CONFIG_MTD_ROM=y -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNP is not set - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_DEV_XD is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# SCSI device support -# -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=m -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_LANCE is not set -# CONFIG_NET_VENDOR_SMC is not set -# CONFIG_SMC91X is not set -# CONFIG_NET_VENDOR_RACAL is not set -# CONFIG_AT1700 is not set -# CONFIG_DEPCA is not set -# CONFIG_HP100 is not set -# CONFIG_NET_ISA is not set -# CONFIG_NET_PCI is not set -# CONFIG_NET_POCKET is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -CONFIG_PPP=y -# CONFIG_PPP_MULTILINK is not set -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=y -# CONFIG_PPP_SYNC_TTY is not set -CONFIG_PPP_DEFLATE=y -CONFIG_PPP_BSDCOMP=y -# CONFIG_PPPOE is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_IMX=y -CONFIG_SERIAL_IMX_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -CONFIG_RTC=m -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# File systems -# -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set - -# -# XFS support -# -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_SYSFS=y -CONFIG_DEVFS_FS=y -CONFIG_DEVFS_MOUNT=y -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS_XATTR is not set -CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -# CONFIG_JFFS2_FS_NAND is not set -# CONFIG_JFFS2_FS_NOR_ECC is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -CONFIG_CRAMFS=y -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -CONFIG_DEBUG_PREEMPT=y -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -CONFIG_DEBUG_INFO=y -# CONFIG_DEBUG_FS is not set -CONFIG_FRAME_POINTER=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y -# CONFIG_DEBUG_LL is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -# CONFIG_CRYPTO_HMAC is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_MD4 is not set -# CONFIG_CRYPTO_MD5 is not set -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -CONFIG_CRC_CCITT=y -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y diff --git a/arch/arm/configs/mx27_defconfig b/arch/arm/configs/mx27_defconfig index edfdd6faf80..b4c1366e9e0 100644 --- a/arch/arm/configs/mx27_defconfig +++ b/arch/arm/configs/mx27_defconfig @@ -200,7 +200,7 @@ CONFIG_MACH_MX27ADS=y CONFIG_MACH_PCM038=y CONFIG_MACH_PCM970_BASEBOARD=y CONFIG_MACH_MX27_3DS=y -CONFIG_MACH_MX27LITE=y +CONFIG_MACH_IMX27LITE=y CONFIG_MXC_IRQ_PRIOR=y CONFIG_MXC_PWM=y diff --git a/arch/arm/configs/mx51_defconfig b/arch/arm/configs/mx51_defconfig new file mode 100644 index 00000000000..c88e9527a8e --- /dev/null +++ b/arch/arm/configs/mx51_defconfig @@ -0,0 +1,1286 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.33-rc6 +# Tue Feb 2 15:20:48 2010 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_LZO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=18 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +CONFIG_RELAY=y +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_SLUB_DEBUG is not set +# CONFIG_COMPAT_BRK is not set +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_BLOCK=y +# CONFIG_LBDAF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set +CONFIG_FREEZER=y + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +CONFIG_ARCH_MXC=y +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_DOVE is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_BCMRING is not set +# CONFIG_ARCH_U8500 is not set + +# +# Freescale MXC Implementations +# +# CONFIG_ARCH_MX1 is not set +# CONFIG_ARCH_MX2 is not set +# CONFIG_ARCH_MX25 is not set +# CONFIG_ARCH_MX3 is not set +# CONFIG_ARCH_MXC91231 is not set +CONFIG_ARCH_MX5=y +CONFIG_ARCH_MX51=y + +# +# MX5 platforms: +# +CONFIG_MACH_MX51_BABBAGE=y +# CONFIG_MXC_IRQ_PRIOR is not set +CONFIG_MXC_TZIC=y +# CONFIG_MXC_PWM is not set +CONFIG_ARCH_MXC_IOMUX_V3=y + +# +# Processor Type +# +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_V7=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_ARM_THUMBEE is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +CONFIG_ARM_L1_CACHE_SHIFT=5 +# CONFIG_ARM_ERRATA_430973 is not set +# CONFIG_ARM_ERRATA_458693 is not set +# CONFIG_ARM_ERRATA_460075 is not set +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y +# CONFIG_PREEMPT is not set +CONFIG_HZ=100 +# CONFIG_THUMB2_KERNEL is not set +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=32768 +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0 +CONFIG_ZBOOT_ROM_BSS=0 +CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/nfs nfsroot=192.168.0.101:/shared/nfs ip=dhcp" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_VFP=y +CONFIG_VFPv3=y +CONFIG_NEON=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=m + +# +# Power management options +# +CONFIG_PM=y +CONFIG_PM_DEBUG=y +# CONFIG_PM_VERBOSE is not set +CONFIG_CAN_PM_TRACE=y +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_PM_TEST_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_APM_EMULATION is not set +# CONFIG_PM_RUNTIME is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="" +# CONFIG_STANDALONE is not set +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_DRBD is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=65536 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MG_DISK is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +CONFIG_SCSI_SCAN_ASYNC=y +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +CONFIG_ATA=m +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y +CONFIG_SATA_PMP=y +CONFIG_ATA_SFF=y +# CONFIG_SATA_MV is not set +# CONFIG_PATA_PLATFORM is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +CONFIG_MARVELL_PHY=y +CONFIG_DAVICOM_PHY=y +CONFIG_QSEMI_PHY=y +CONFIG_LXT_PHY=y +CONFIG_CICADA_PHY=y +CONFIG_VITESSE_PHY=y +CONFIG_SMSC_PHY=y +CONFIG_BROADCOM_PHY=y +CONFIG_ICPLUS_PHY=y +CONFIG_REALTEK_PHY=y +CONFIG_NATIONAL_PHY=y +CONFIG_STE10XP=y +CONFIG_LSI_ET1011C_PHY=y +CONFIG_FIXED_PHY=y +CONFIG_MDIO_BITBANG=y +CONFIG_MDIO_GPIO=y +CONFIG_NET_ETHERNET=y +CONFIG_MII=m +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +CONFIG_FEC=y +# CONFIG_FEC2 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_WLAN is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +CONFIG_INPUT_EVBUG=m + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_QT2160 is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_MAX7359 is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=m +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +CONFIG_MOUSE_PS2_ELANTECH=y +# CONFIG_MOUSE_PS2_SENTELIC is not set +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set +# CONFIG_MOUSE_SYNAPTICS_I2C is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=m +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_ALTERA_PS2 is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_DEVKMEM is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_IMX=y +CONFIG_SERIAL_IMX_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_COMPAT is not set +CONFIG_I2C_CHARDEV=m +# CONFIG_I2C_HELPER_AUTO is not set + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=m +CONFIG_I2C_ALGOPCF=m +CONFIG_I2C_ALGOPCA=m + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_DESIGNWARE is not set +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_IMX is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_ADP5588 is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# + +# +# AC97 GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=m +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +CONFIG_MMC_SDHCI=m +# CONFIG_MMC_SDHCI_PLTFM is not set +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_ATMELMCI is not set +# CONFIG_MMC_MXC is not set +# CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=m + +# +# LED drivers +# +# CONFIG_LEDS_PCA9532 is not set +# CONFIG_LEDS_GPIO is not set +# CONFIG_LEDS_LP3944 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_BD2802 is not set +# CONFIG_LEDS_LT3593 is not set + +# +# LED Triggers +# +# CONFIG_LEDS_TRIGGERS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +CONFIG_RTC_INTF_DEV_UIE_EMUL=y +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set +# CONFIG_RTC_MXC is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_DEFAULTS_TO_ORDERED=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_EXT4_FS=y +CONFIG_EXT4_FS_XATTR=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y +# CONFIG_EXT4_DEBUG is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=y +# CONFIG_JBD2_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +# CONFIG_PRINT_QUOTA_WARNING is not set +# CONFIG_QFMT_V1 is not set +# CONFIG_QFMT_V2 is not set +CONFIG_QUOTACTL=y +CONFIG_AUTOFS_FS=y +CONFIG_AUTOFS4_FS=y +CONFIG_FUSE_FS=y +# CONFIG_CUSE is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_CONFIGFS_FS=m +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="cp437" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=m +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +CONFIG_NLS_ISO8859_15=m +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +# CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_DETECT_HUNG_TASK is not set +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_ARM_UNWIND is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +CONFIG_EARLY_PRINTK=y +# CONFIG_DEBUG_ICEDCC is not set +# CONFIG_OC_ETM is not set + +# +# Security options +# +CONFIG_KEYS=y +# CONFIG_KEYS_DEBUG_PROC_KEYS is not set +# CONFIG_SECURITY is not set +CONFIG_SECURITYFS=y +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_GHASH is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_ZLIB is not set +CONFIG_CRYPTO_LZO=y + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_RATIONAL=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=m +CONFIG_CRC16=y +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=m +CONFIG_CRC32=y +CONFIG_CRC7=m +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig index 85b05d3e279..ee1ebd8dfa8 100644 --- a/arch/arm/configs/orion5x_defconfig +++ b/arch/arm/configs/orion5x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc6 -# Sat Nov 7 20:52:21 2009 +# Linux kernel version: 2.6.33-rc6 +# Thu Feb 4 23:30:00 2010 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -32,6 +32,12 @@ CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_LZO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y @@ -45,6 +51,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -122,14 +129,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -158,6 +192,7 @@ CONFIG_MMU=y # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_DOVE is not set # CONFIG_ARCH_KIRKWOOD is not set # CONFIG_ARCH_LOKI is not set # CONFIG_ARCH_MV78XX0 is not set @@ -180,6 +215,7 @@ CONFIG_ARCH_ORION5X=y # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set # CONFIG_ARCH_BCMRING is not set +# CONFIG_ARCH_U8500 is not set # # Orion Implementations @@ -192,6 +228,7 @@ CONFIG_MACH_TS209=y CONFIG_MACH_TERASTATION_PRO2=y CONFIG_MACH_LINKSTATION_PRO=y CONFIG_MACH_LINKSTATION_MINI=y +CONFIG_MACH_LINKSTATION_LS_HGL=y CONFIG_MACH_TS409=y CONFIG_MACH_WRT350N_V2=y CONFIG_MACH_TS78XX=y @@ -268,12 +305,10 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4096 +CONFIG_SPLIT_PTLOCK_CPUS=999999 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_LEDS=y @@ -412,10 +447,6 @@ CONFIG_NET_PKTGEN=m # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -# CONFIG_WIRELESS_OLD_REGULATORY is not set -CONFIG_WIRELESS_EXT=y -CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_LIB80211 is not set # @@ -554,6 +585,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set @@ -562,6 +597,7 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_ATA_OVER_ETH is not set # CONFIG_MG_DISK is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set @@ -569,6 +605,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set # CONFIG_C2PORT is not set # @@ -621,7 +658,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set @@ -657,6 +696,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set @@ -711,15 +751,16 @@ CONFIG_SATA_MV=y # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set +# CONFIG_PATA_TOSHIBA is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set @@ -736,7 +777,7 @@ CONFIG_SATA_MV=y # # -# See the help texts for more information. +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -842,8 +883,10 @@ CONFIG_MV643XX_ETH=y # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -866,6 +909,7 @@ CONFIG_WLAN=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -875,6 +919,7 @@ CONFIG_WLAN=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -993,11 +1038,6 @@ CONFIG_I2C_MV64XXX=y # CONFIG_I2C_TINY_USB is not set # -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - -# # Other I2C/SMBus bus drivers # # CONFIG_I2C_PCA_PLATFORM is not set @@ -1006,7 +1046,6 @@ CONFIG_I2C_MV64XXX=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1033,10 +1072,12 @@ CONFIG_GPIO_SYSFS=y # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_ADP5588 is not set # # PCI GPIO expanders: # +# CONFIG_GPIO_CS5535 is not set # CONFIG_GPIO_BT8XX is not set # CONFIG_GPIO_LANGWELL is not set @@ -1079,6 +1120,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM73 is not set CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -1104,6 +1146,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_TMP421 is not set @@ -1118,6 +1161,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_I2C is not set # CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1140,11 +1184,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_MFD_TC6393XB is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1316,6 +1362,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # OTG and related infrastructure # # CONFIG_USB_GPIO_VBUS is not set +# CONFIG_USB_ULPI is not set # CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set @@ -1332,6 +1379,7 @@ CONFIG_LEDS_GPIO_PLATFORM=y # CONFIG_LEDS_LP3944 is not set # CONFIG_LEDS_PCA955X is not set # CONFIG_LEDS_BD2802 is not set +# CONFIG_LEDS_LT3593 is not set # # LED Triggers @@ -1377,6 +1425,7 @@ CONFIG_RTC_DRV_PCF8563=y # CONFIG_RTC_DRV_PCF8583 is not set CONFIG_RTC_DRV_M41T80=y # CONFIG_RTC_DRV_M41T80_WDT is not set +# CONFIG_RTC_DRV_BQ32K is not set CONFIG_RTC_DRV_S35390A=y # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -1398,7 +1447,9 @@ CONFIG_RTC_DRV_S35390A=y CONFIG_RTC_DRV_M48T86=y # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1686,7 +1737,9 @@ CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUG_LL=y +# CONFIG_EARLY_PRINTK is not set # CONFIG_DEBUG_ICEDCC is not set +# CONFIG_OC_ETM is not set # # Security options @@ -1694,7 +1747,11 @@ CONFIG_DEBUG_LL=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/arm/configs/pxa168_defconfig b/arch/arm/configs/pxa168_defconfig index 791b8c39aef..113511f91eb 100644 --- a/arch/arm/configs/pxa168_defconfig +++ b/arch/arm/configs/pxa168_defconfig @@ -1,15 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc3 -# Fri Mar 20 13:43:13 2009 +# Linux kernel version: 2.6.33-rc3 +# Tue Jan 12 08:57:10 2010 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -18,13 +16,12 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -35,6 +32,12 @@ CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_LZO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y @@ -46,11 +49,13 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_GROUP_SCHED is not set @@ -64,10 +69,10 @@ CONFIG_NAMESPACES=y # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set # CONFIG_NET_NS is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y @@ -78,17 +83,20 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -98,6 +106,11 @@ CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -109,8 +122,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -118,31 +130,62 @@ CONFIG_BLOCK=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # # System Type # +CONFIG_MMU=y # CONFIG_ARCH_AAEC2000 is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -150,26 +193,30 @@ CONFIG_DEFAULT_IOSCHED="cfq" # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_DOVE is not set # CONFIG_ARCH_KIRKWOOD is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_LOKI is not set # CONFIG_ARCH_MV78XX0 is not set -# CONFIG_ARCH_MXC is not set # CONFIG_ARCH_ORION5X is not set +CONFIG_ARCH_MMP=y +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set -CONFIG_ARCH_MMP=y +# CONFIG_ARCH_MSM is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM is not set -# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_BCMRING is not set +# CONFIG_ARCH_U8500 is not set # CONFIG_MACH_TAVOREVB is not set # @@ -177,6 +224,7 @@ CONFIG_ARCH_MMP=y # CONFIG_MACH_ASPENITE=y CONFIG_MACH_ZYLONITE2=y +CONFIG_MACH_AVENGERS_LITE=y # CONFIG_MACH_TTC_DKB is not set CONFIG_CPU_PXA168=y CONFIG_PLAT_PXA=y @@ -187,7 +235,7 @@ CONFIG_PLAT_PXA=y CONFIG_CPU_MOHAWK=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_PABRT_LEGACY=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_COPY_V4WB=y CONFIG_CPU_TLB_V4WBI=y @@ -201,7 +249,7 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_BPREDICT_DISABLE is not set -# CONFIG_OUTER_CACHE is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 CONFIG_IWMMXT=y CONFIG_COMMON_CLKDEV=y @@ -223,13 +271,15 @@ CONFIG_VMSPLIT_3G=y # CONFIG_VMSPLIT_2G is not set # CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y CONFIG_OABI_COMPAT=y -CONFIG_ARCH_FLATMEM_HAS_HOLES=y # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -237,12 +287,14 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4096 +CONFIG_SPLIT_PTLOCK_CPUS=999999 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set # # Boot options @@ -288,7 +340,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -330,6 +381,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -343,6 +395,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -355,13 +409,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -374,6 +428,7 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_FW_LOADER=y @@ -412,8 +467,10 @@ CONFIG_MII=y # CONFIG_AX88796 is not set CONFIG_SMC91X=y # CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set # CONFIG_SMC911X is not set # CONFIG_SMSC911X is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -422,15 +479,12 @@ CONFIG_SMC91X=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set +CONFIG_WLAN=y +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -442,6 +496,7 @@ CONFIG_SMC91X=y # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_ISDN is not set +# CONFIG_PHONE is not set # # Input device support @@ -449,6 +504,7 @@ CONFIG_SMC91X=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -510,6 +566,11 @@ CONFIG_UNIX98_PTYS=y # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y # CONFIG_DEBUG_GPIO is not set @@ -530,11 +591,14 @@ CONFIG_GPIOLIB=y # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -555,22 +619,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_T7L66XB is not set # CONFIG_MFD_TC6387XB is not set # CONFIG_MFD_TC6393XB is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -595,13 +645,17 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set -# CONFIG_ACCESSIBILITY is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set -# CONFIG_REGULATOR is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -613,10 +667,13 @@ CONFIG_RTC_LIB=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -627,6 +684,11 @@ CONFIG_INOTIFY_USER=y CONFIG_GENERIC_ACL=y # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -673,6 +735,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -681,7 +744,6 @@ CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -706,6 +768,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -714,11 +777,15 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_PREEMPT is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -738,28 +805,33 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set CONFIG_HAVE_FUNCTION_TRACER=y - -# -# Tracers -# +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -768,7 +840,9 @@ CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUG_LL=y +# CONFIG_EARLY_PRINTK is not set # CONFIG_DEBUG_ICEDCC is not set +# CONFIG_OC_ETM is not set # # Security options @@ -776,13 +850,16 @@ CONFIG_DEBUG_LL=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -791,10 +868,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -822,11 +901,13 @@ CONFIG_CRYPTO_CBC=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set @@ -863,6 +944,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -870,6 +952,7 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -884,7 +967,7 @@ CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/raumfeld_defconfig b/arch/arm/configs/raumfeld_defconfig new file mode 100644 index 00000000000..acb1a8f30e3 --- /dev/null +++ b/arch/arm/configs/raumfeld_defconfig @@ -0,0 +1,1898 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.32-rc5 +# Sun Nov 1 21:57:32 2009 +# +CONFIG_ARM=y +CONFIG_HAVE_PWM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_ARCH_HAS_CPUFREQ=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +# CONFIG_SYSVIPC is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +CONFIG_SLOW_WORK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +# CONFIG_LBDAF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_FREEZER=y + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_BCMRING is not set + +# +# Intel PXA2xx/PXA3xx Implementations +# + +# +# Supported PXA3xx Processor Variants +# +CONFIG_CPU_PXA300=y +# CONFIG_CPU_PXA310 is not set +CONFIG_CPU_PXA320=y +# CONFIG_CPU_PXA930 is not set +# CONFIG_CPU_PXA935 is not set +# CONFIG_CPU_PXA950 is not set + +# +# Intel/Marvell Dev Platforms (sorted by hardware release time) +# +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_MACH_ZYLONITE is not set +# CONFIG_MACH_LITTLETON is not set +# CONFIG_MACH_TAVOREVB is not set +# CONFIG_MACH_SAAR is not set + +# +# Third Party Dev Platforms (sorted by vendor name) +# +# CONFIG_ARCH_PXA_IDP is not set +# CONFIG_ARCH_VIPER is not set +# CONFIG_MACH_BALLOON3 is not set +# CONFIG_MACH_CSB726 is not set +# CONFIG_MACH_ARMCORE is not set +# CONFIG_MACH_EM_X270 is not set +# CONFIG_MACH_EXEDA is not set +# CONFIG_MACH_CM_X300 is not set +# CONFIG_ARCH_GUMSTIX is not set +# CONFIG_MACH_INTELMOTE2 is not set +# CONFIG_MACH_STARGATE2 is not set +# CONFIG_MACH_XCEP is not set +# CONFIG_TRIZEPS_PXA is not set +# CONFIG_MACH_LOGICPD_PXA270 is not set +# CONFIG_MACH_PCM027 is not set +# CONFIG_MACH_COLIBRI is not set +# CONFIG_MACH_COLIBRI300 is not set +# CONFIG_MACH_COLIBRI320 is not set + +# +# End-user Products (sorted by vendor name) +# +# CONFIG_MACH_H4700 is not set +# CONFIG_MACH_H5000 is not set +# CONFIG_MACH_HIMALAYA is not set +# CONFIG_MACH_MAGICIAN is not set +# CONFIG_MACH_MIOA701 is not set +# CONFIG_PXA_EZX is not set +# CONFIG_MACH_MP900C is not set +# CONFIG_ARCH_PXA_PALM is not set +CONFIG_MACH_RAUMFELD_RC=y +CONFIG_MACH_RAUMFELD_CONNECTOR=y +CONFIG_MACH_RAUMFELD_PROTO=y +CONFIG_MACH_RAUMFELD_SPEAKER=y +# CONFIG_PXA_SHARPSL is not set +# CONFIG_ARCH_PXA_ESERIES is not set +CONFIG_PXA3xx=y +CONFIG_PXA_SSP=y +CONFIG_PLAT_PXA=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSC3=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_PABRT_LEGACY=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y +CONFIG_IO_36=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_OUTER_CACHE=y +CONFIG_CACHE_XSC3L2=y +CONFIG_ARM_L1_CACHE_SHIFT=5 +CONFIG_IWMMXT=y +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_HZ=100 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0 +CONFIG_ZBOOT_ROM_BSS=0 +CONFIG_CMDLINE="console=ttyS0,115200 rw" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +# CONFIG_CPU_FREQ_DEBUG is not set +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_LADDER=y +CONFIG_CPU_IDLE_GOV_MENU=y + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_APM_EMULATION=y +# CONFIG_PM_RUNTIME is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=y +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=y +CONFIG_INET6_XFRM_MODE_TUNNEL=y +CONFIG_INET6_XFRM_MODE_BEET=y +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +CONFIG_WIRELESS=y +CONFIG_CFG80211=y +# CONFIG_NL80211_TESTMODE is not set +# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set +CONFIG_CFG80211_REG_DEBUG=y +CONFIG_CFG80211_DEFAULT_PS=y +CONFIG_CFG80211_DEFAULT_PS_VALUE=1 +CONFIG_WIRELESS_OLD_REGULATORY=y +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +CONFIG_LIB80211=y +# CONFIG_LIB80211_DEBUG is not set +CONFIG_MAC80211=y +CONFIG_MAC80211_RC_MINSTREL=y +# CONFIG_MAC80211_RC_DEFAULT_PID is not set +CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT="minstrel" +# CONFIG_MAC80211_MESH is not set +# CONFIG_MAC80211_LEDS is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +CONFIG_NFTL=y +CONFIG_NFTL_RW=y +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +CONFIG_MTD_BLOCK2MTD=y + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_H1900 is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_SHARPSL is not set +CONFIG_MTD_NAND_PXA3xx=y +# CONFIG_MTD_NAND_PXA3xx_BUILTIN is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +# CONFIG_MTD_UBI_GLUEBI is not set + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MG_DISK is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_ISL29003=y +CONFIG_TI_DAC7512=y +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +CONFIG_SMSC911X=y +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +CONFIG_WLAN=y +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +CONFIG_LIBERTAS=y +# CONFIG_LIBERTAS_USB is not set +CONFIG_LIBERTAS_SDIO=m +# CONFIG_LIBERTAS_SPI is not set +# CONFIG_LIBERTAS_DEBUG is not set +# CONFIG_LIBERTAS_THINFIRM is not set +# CONFIG_AT76C50X_USB is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_RTL8187 is not set +# CONFIG_MAC80211_HWSIM is not set +# CONFIG_P54_COMMON is not set +# CONFIG_ATH_COMMON is not set +# CONFIG_HOSTAP is not set +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +# CONFIG_ZD1211RW is not set +# CONFIG_RT2X00 is not set +# CONFIG_WL12XX is not set +# CONFIG_IWM is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +CONFIG_USB_USBNET=y +# CONFIG_USB_NET_AX8817X is not set +CONFIG_USB_NET_CDCETHER=y +# CONFIG_USB_NET_CDC_EEM is not set +# CONFIG_USB_NET_DM9601 is not set +# CONFIG_USB_NET_SMSC95XX is not set +# CONFIG_USB_NET_GL620A is not set +# CONFIG_USB_NET_NET1080 is not set +# CONFIG_USB_NET_PLUSB is not set +CONFIG_USB_NET_MCS7830=y +# CONFIG_USB_NET_RNDIS_HOST is not set +# CONFIG_USB_NET_CDC_SUBSET is not set +# CONFIG_USB_NET_ZAURUS is not set +# CONFIG_USB_NET_INT51X1 is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_POLLDEV=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_QT2160 is not set +# CONFIG_KEYBOARD_LKKBD is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_MAX7359 is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_KEYBOARD_PXA27x is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_AD7877 is not set +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879_SPI is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +CONFIG_TOUCHSCREEN_EETI=m +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MCS5000 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_TOUCHSCREEN_W90X900 is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set +# CONFIG_INPUT_UINPUT is not set +CONFIG_INPUT_GPIO_ROTARY_ENCODER=y + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_MAX3100 is not set +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_DESIGNWARE is not set +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_PXA=y +# CONFIG_I2C_PXA_SLAVE is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +CONFIG_SPI_DEBUG=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BITBANG=y +CONFIG_SPI_GPIO=y +# CONFIG_SPI_PXA2XX is not set + +# +# SPI Protocol Masters +# +CONFIG_SPI_SPIDEV=y +# CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +CONFIG_DEBUG_GPIO=y +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# AC97 GPIO expanders: +# +CONFIG_W1=m + +# +# 1-wire Bus Masters +# +# CONFIG_W1_MASTER_DS2490 is not set +# CONFIG_W1_MASTER_DS2482 is not set +# CONFIG_W1_MASTER_DS1WM is not set +CONFIG_W1_MASTER_GPIO=m + +# +# 1-wire Slaves +# +# CONFIG_W1_SLAVE_THERM is not set +# CONFIG_W1_SLAVE_SMEM is not set +# CONFIG_W1_SLAVE_DS2431 is not set +# CONFIG_W1_SLAVE_DS2433 is not set +CONFIG_W1_SLAVE_DS2760=m +# CONFIG_W1_SLAVE_BQ27000 is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +CONFIG_PDA_POWER=y +# CONFIG_APM_POWER is not set +CONFIG_BATTERY_DS2760=m +# CONFIG_BATTERY_DS2782 is not set +# CONFIG_BATTERY_BQ27x00 is not set +# CONFIG_BATTERY_MAX17040 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_MAX1111 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +CONFIG_SENSORS_LIS3_SPI=y +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set +CONFIG_REGULATOR=y +CONFIG_REGULATOR_DEBUG=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_REGULATOR_MAX1586 is not set +CONFIG_REGULATOR_MAX8660=y +# CONFIG_REGULATOR_LP3971 is not set +# CONFIG_REGULATOR_TPS65023 is not set +# CONFIG_REGULATOR_TPS6507X is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_PXA=y +# CONFIG_FB_PXA_OVERLAY is not set +# CONFIG_FB_PXA_SMARTPANEL is not set +# CONFIG_FB_PXA_PARAMETERS is not set +CONFIG_PXA3XX_GCU=y +# CONFIG_FB_MBX is not set +# CONFIG_FB_W100 is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_GENERIC is not set +CONFIG_BACKLIGHT_PWM=y + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +# CONFIG_LOGO_LINUX_CLUT224 is not set +CONFIG_LOGO_RAUMFELD_CLUT224=y +CONFIG_SOUND=y +# CONFIG_SOUND_OSS_CORE is not set +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_JACK=y +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +# CONFIG_SND_DRIVERS is not set +CONFIG_SND_ARM=y +CONFIG_SND_PXA2XX_LIB=y +# CONFIG_SND_PXA2XX_AC97 is not set +CONFIG_SND_SPI=y +# CONFIG_SND_USB is not set +CONFIG_SND_SOC=y +CONFIG_SND_PXA2XX_SOC=y +CONFIG_SND_PXA_SOC_SSP=y +CONFIG_SND_SOC_RAUMFELD=y +CONFIG_SND_SOC_I2C_AND_SPI=y +# CONFIG_SND_SOC_ALL_CODECS is not set +CONFIG_SND_SOC_AK4104=y +CONFIG_SND_SOC_CS4270=y +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DRAGONRISE=y +# CONFIG_DRAGONRISE_FF is not set +CONFIG_HID_EZKEY=y +CONFIG_HID_KYE=y +CONFIG_HID_GYRATION=y +CONFIG_HID_TWINHAN=y +CONFIG_HID_KENSINGTON=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_NTRIG=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +CONFIG_HID_GREENASIA=y +# CONFIG_GREENASIA_FF is not set +CONFIG_HID_SMARTJOYPLUS=y +# CONFIG_SMARTJOYPLUS_FF is not set +CONFIG_HID_TOPSEED=y +CONFIG_HID_THRUSTMASTER=y +# CONFIG_THRUSTMASTER_FF is not set +CONFIG_HID_ZEROPLUS=y +# CONFIG_ZEROPLUS_FF is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +CONFIG_USB_DEBUG=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +CONFIG_USB_STORAGE_FREECOM=y +CONFIG_USB_STORAGE_ISD200=y +CONFIG_USB_STORAGE_USBAT=y +CONFIG_USB_STORAGE_SDDR09=y +CONFIG_USB_STORAGE_SDDR55=y +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +CONFIG_MMC_PXA=m +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_ATMELMCI is not set +# CONFIG_MMC_SPI is not set +# CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_LP3944 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_DAC124S085 is not set +# CONFIG_LEDS_PWM is not set +# CONFIG_LEDS_BD2802 is not set +CONFIG_LEDS_LT3593=y + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +# CONFIG_LEDS_TRIGGER_TIMER is not set +# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set +CONFIG_LEDS_TRIGGER_BACKLIGHT=y +# CONFIG_LEDS_TRIGGER_GPIO is not set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set + +# +# iptables trigger is under Netfilter config (LED target) +# +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_DRV_SA1100 is not set +CONFIG_RTC_DRV_PXA=y +CONFIG_DMADEVICES=y + +# +# DMA Devices +# +# CONFIG_AUXDISPLAY is not set +CONFIG_UIO=y +# CONFIG_UIO_PDRV is not set +# CONFIG_UIO_PDRV_GENIRQ is not set +# CONFIG_UIO_SMX is not set +# CONFIG_UIO_SERCOS3 is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +CONFIG_EXT2_FS_XIP=y +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4_FS is not set +CONFIG_FS_XIP=y +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +CONFIG_FSCACHE=y +CONFIG_FSCACHE_STATS=y +# CONFIG_FSCACHE_HISTOGRAM is not set +# CONFIG_FSCACHE_DEBUG is not set +CONFIG_CACHEFILES=y +# CONFIG_CACHEFILES_DEBUG is not set +# CONFIG_CACHEFILES_HISTOGRAM is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +CONFIG_UBIFS_FS=y +# CONFIG_UBIFS_FS_XATTR is not set +# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +# CONFIG_UBIFS_FS_DEBUG is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +CONFIG_NFS_FSCACHE=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=y +CONFIG_NLS_CODEPAGE_775=y +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_CODEPAGE_852=y +CONFIG_NLS_CODEPAGE_855=y +CONFIG_NLS_CODEPAGE_857=y +CONFIG_NLS_CODEPAGE_860=y +CONFIG_NLS_CODEPAGE_861=y +CONFIG_NLS_CODEPAGE_862=y +CONFIG_NLS_CODEPAGE_863=y +CONFIG_NLS_CODEPAGE_864=y +CONFIG_NLS_CODEPAGE_865=y +CONFIG_NLS_CODEPAGE_866=y +CONFIG_NLS_CODEPAGE_869=y +CONFIG_NLS_CODEPAGE_936=y +CONFIG_NLS_CODEPAGE_950=y +CONFIG_NLS_CODEPAGE_932=y +CONFIG_NLS_CODEPAGE_949=y +CONFIG_NLS_CODEPAGE_874=y +CONFIG_NLS_ISO8859_8=y +CONFIG_NLS_CODEPAGE_1250=y +CONFIG_NLS_CODEPAGE_1251=y +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=y +CONFIG_NLS_ISO8859_3=y +CONFIG_NLS_ISO8859_4=y +CONFIG_NLS_ISO8859_5=y +CONFIG_NLS_ISO8859_6=y +CONFIG_NLS_ISO8859_7=y +CONFIG_NLS_ISO8859_9=y +CONFIG_NLS_ISO8859_13=y +CONFIG_NLS_ISO8859_14=y +CONFIG_NLS_ISO8859_15=y +CONFIG_NLS_KOI8_R=y +CONFIG_NLS_KOI8_U=y +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_ZLIB is not set +CONFIG_CRYPTO_LZO=y + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +CONFIG_CRC16=y +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 2f10dae0279..8e94c3caeb8 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -187,7 +187,7 @@ CONFIG_S3C24XX_GPIO_EXTRA128=y CONFIG_PM_SIMTEC=y CONFIG_S3C2410_DMA=y # CONFIG_S3C2410_DMA_DEBUG is not set -CONFIG_S3C24XX_ADC=y +CONFIG_S3C_ADC=y CONFIG_MACH_SMDK=y CONFIG_PLAT_S3C=y CONFIG_CPU_LLSERIAL_S3C2410=y @@ -203,8 +203,8 @@ CONFIG_S3C_BOOT_UART_FORCE_FIFO=y # # Power management # -# CONFIG_S3C2410_PM_DEBUG is not set -# CONFIG_S3C2410_PM_CHECK is not set +# CONFIG_SAMSUNG_PM_DEBUG is not set +# CONFIG_SAMSUNG_PM_CHECK is not set CONFIG_S3C_LOWLEVEL_UART_PORT=0 CONFIG_S3C_GPIO_SPACE=0 CONFIG_S3C_DEV_HSMMC=y diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig index f56e50fab79..5e7d4c1b8fc 100644 --- a/arch/arm/configs/s3c6400_defconfig +++ b/arch/arm/configs/s3c6400_defconfig @@ -1,14 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Mon Nov 3 10:10:30 2008 +# Linux kernel version: 2.6.33-rc4 +# Tue Jan 19 13:12:40 2010 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y -# CONFIG_GENERIC_TIME is not set -# CONFIG_GENERIC_CLOCKEVENTS is not set -CONFIG_MMU=y CONFIG_NO_IOPORT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y @@ -18,13 +15,13 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_HAS_CPUFREQ=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -34,13 +31,30 @@ CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_LZO is not set CONFIG_SWAP=y # CONFIG_SYSVIPC is not set # CONFIG_BSD_PROCESS_ACCT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -50,8 +64,13 @@ CONFIG_NAMESPACES=y # CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_RD_LZO=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y @@ -62,32 +81,38 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -95,11 +120,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set -CONFIG_LSF=y +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -107,33 +129,62 @@ CONFIG_LSF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # # System Type # +CONFIG_MMU=y # CONFIG_ARCH_AAEC2000 is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -141,35 +192,62 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_DOVE is not set # CONFIG_ARCH_KIRKWOOD is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_LOKI is not set # CONFIG_ARCH_MV78XX0 is not set -# CONFIG_ARCH_MXC is not set # CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set CONFIG_ARCH_S3C64XX=y +# CONFIG_ARCH_S5P6440 is not set +# CONFIG_ARCH_S5PC1XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_BCMRING is not set +# CONFIG_ARCH_U8500 is not set +CONFIG_PLAT_SAMSUNG=y +CONFIG_SAMSUNG_CLKSRC=y +CONFIG_SAMSUNG_IRQ_VIC_TIMER=y +CONFIG_SAMSUNG_IRQ_UART=y +CONFIG_S3C_GPIO_CFG_S3C24XX=y +CONFIG_S3C_GPIO_CFG_S3C64XX=y +CONFIG_S3C_GPIO_PULL_UPDOWN=y +CONFIG_SAMSUNG_GPIO_EXTRA=0 +# CONFIG_S3C_ADC is not set +CONFIG_S3C_DEV_HSMMC=y +CONFIG_S3C_DEV_HSMMC1=y +CONFIG_S3C_DEV_I2C1=y +CONFIG_S3C_DEV_FB=y +CONFIG_S3C_DEV_USB_HOST=y +CONFIG_S3C_DEV_USB_HSOTG=y +CONFIG_S3C_DEV_NAND=y CONFIG_PLAT_S3C64XX=y CONFIG_CPU_S3C6400_INIT=y CONFIG_CPU_S3C6400_CLOCK=y +# CONFIG_S3C64XX_DMA is not set CONFIG_S3C64XX_SETUP_I2C0=y CONFIG_S3C64XX_SETUP_I2C1=y +CONFIG_S3C64XX_SETUP_FB_24BPP=y +CONFIG_S3C64XX_SETUP_SDHCI_GPIO=y CONFIG_PLAT_S3C=y # # Boot options # CONFIG_S3C_BOOT_ERROR_RESET=y +CONFIG_S3C_BOOT_UART_FORCE_FIFO=y # # Power management @@ -177,17 +255,16 @@ CONFIG_S3C_BOOT_ERROR_RESET=y CONFIG_S3C_LOWLEVEL_UART_PORT=0 CONFIG_S3C_GPIO_SPACE=0 CONFIG_S3C_GPIO_TRACK=y -CONFIG_S3C_GPIO_PULL_UPDOWN=y -CONFIG_S3C_GPIO_CFG_S3C24XX=y -CONFIG_S3C_GPIO_CFG_S3C64XX=y -CONFIG_S3C_DEV_HSMMC=y -CONFIG_S3C_DEV_HSMMC1=y -CONFIG_S3C_DEV_I2C1=y +# CONFIG_MACH_SMDK6400 is not set CONFIG_CPU_S3C6410=y CONFIG_S3C6410_SETUP_SDHCI=y +# CONFIG_MACH_ANW6410 is not set CONFIG_MACH_SMDK6410=y CONFIG_SMDK6410_SD_CH0=y # CONFIG_SMDK6410_SD_CH1 is not set +# CONFIG_SMDK6410_WM1190_EV1 is not set +# CONFIG_MACH_NCP is not set +# CONFIG_MACH_HMT is not set # # Processor Type @@ -196,7 +273,7 @@ CONFIG_CPU_V6=y CONFIG_CPU_32v6K=y CONFIG_CPU_32v6=y CONFIG_CPU_ABRT_EV6=y -CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_PABRT_V6=y CONFIG_CPU_CACHE_V6=y CONFIG_CPU_CACHE_VIPT=y CONFIG_CPU_COPY_V6=y @@ -212,8 +289,10 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_BPREDICT_DISABLE is not set -# CONFIG_OUTER_CACHE is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 +# CONFIG_ARM_ERRATA_411920 is not set CONFIG_ARM_VIC=y +CONFIG_ARM_VIC_NR=2 # # Bus support @@ -229,13 +308,15 @@ CONFIG_VMSPLIT_3G=y # CONFIG_VMSPLIT_2G is not set # CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_HZ=100 CONFIG_AEABI=y CONFIG_OABI_COMPAT=y -CONFIG_ARCH_FLATMEM_HAS_HOLES=y # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -243,26 +324,28 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set +CONFIG_SPLIT_PTLOCK_CPUS=999999 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set # # Boot options # CONFIG_ZBOOT_ROM_TEXT=0 CONFIG_ZBOOT_ROM_BSS=0 -CONFIG_CMDLINE="console=ttySAC0,115200 root=/dev/ram init=/bin/bash initrd=0x51000000,4M" +CONFIG_CMDLINE="console=ttySAC0,115200 root=/dev/ram init=/linuxrc initrd=0x51000000,6M ramdisk_size=6144" # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set # # CPU Power Management # +# CONFIG_CPU_FREQ is not set # CONFIG_CPU_IDLE is not set # @@ -300,6 +383,7 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -314,14 +398,32 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set +# CONFIG_MG_DISK is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set +# CONFIG_AD525X_DPOT is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +CONFIG_EEPROM_AT24=y +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_IWMC3200TOP is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -334,6 +436,7 @@ CONFIG_HAVE_IDE=y # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set # CONFIG_MD is not set +# CONFIG_PHONE is not set # # Input device support @@ -341,6 +444,7 @@ CONFIG_HAVE_IDE=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -357,27 +461,33 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_SENTELIC is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_MOUSE_GPIO is not set +# CONFIG_MOUSE_SYNAPTICS_I2C is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set @@ -390,6 +500,7 @@ CONFIG_SERIO=y CONFIG_SERIO_SERPORT=y CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_GAMEPORT is not set # @@ -423,16 +534,18 @@ CONFIG_SERIAL_S3C6400=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y -# CONFIG_NVRAM is not set +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -443,6 +556,7 @@ CONFIG_I2C_HELPER_AUTO=y # # I2C system bus drivers (mostly embedded / system-on-chip) # +# CONFIG_I2C_DESIGNWARE is not set # CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set CONFIG_I2C_S3C2410=y @@ -463,32 +577,33 @@ CONFIG_I2C_S3C2410=y # # Miscellaneous I2C Chip support # -# CONFIG_DS1682 is not set -CONFIG_EEPROM_AT24=y -# CONFIG_EEPROM_LEGACY is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y # CONFIG_DEBUG_GPIO is not set # CONFIG_GPIO_SYSFS is not set # +# Memory mapped GPIO expanders: +# + +# # I2C GPIO expanders: # # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_ADP5588 is not set # # PCI GPIO expanders: @@ -497,10 +612,19 @@ CONFIG_GPIOLIB=y # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -509,17 +633,21 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM73 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -530,16 +658,24 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set @@ -549,15 +685,14 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_SENSORS_LIS3_I2C is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -568,28 +703,22 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_ASIC3 is not set # CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_MFD_T7L66XB is not set # CONFIG_MFD_TC6387XB is not set # CONFIG_MFD_TC6393XB is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -612,17 +741,15 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -CONFIG_HID_DEBUG=y # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set # # Special HID drivers # -# CONFIG_HID_COMPAT is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y -# CONFIG_USB_ARCH_HAS_OHCI is not set +CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB_ARCH_HAS_EHCI is not set # CONFIG_USB is not set @@ -631,9 +758,13 @@ CONFIG_USB_ARCH_HAS_HCD=y # # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# CONFIG_MMC=y CONFIG_MMC_DEBUG=y CONFIG_MMC_UNSAFE_RESUME=y @@ -650,22 +781,24 @@ CONFIG_SDIO_UART=y # MMC/SD/SDIO Host Controller Drivers # CONFIG_MMC_SDHCI=y +# CONFIG_MMC_SDHCI_PLTFM is not set CONFIG_MMC_SDHCI_S3C=y +# CONFIG_MMC_SDHCI_S3C_DMA is not set +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_ATMELMCI is not set # CONFIG_MEMSTICK is not set -# CONFIG_ACCESSIBILITY is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set # -# Voltage and Current regulators +# TI VLYNQ # -# CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set -# CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -674,6 +807,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y @@ -683,9 +817,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -696,6 +833,11 @@ CONFIG_INOTIFY_USER=y CONFIG_GENERIC_ACL=y # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -719,10 +861,7 @@ CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -731,12 +870,17 @@ CONFIG_TMPFS_POSIX_ACL=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_MTD is not set +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_BLOCK=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set @@ -755,6 +899,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -763,12 +908,16 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set CONFIG_DEBUG_RT_MUTEXES=y CONFIG_DEBUG_PI_LIST=y # CONFIG_RT_MUTEX_TESTER is not set @@ -787,34 +936,43 @@ CONFIG_DEBUG_INFO=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_PAGE_POISONING is not set CONFIG_HAVE_FUNCTION_TRACER=y - -# -# Tracers -# +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUG_LL=y +# CONFIG_EARLY_PRINTK is not set # CONFIG_DEBUG_ICEDCC is not set +# CONFIG_OC_ETM is not set CONFIG_DEBUG_S3C_UART=0 # @@ -823,13 +981,19 @@ CONFIG_DEBUG_S3C_UART=0 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" # CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -838,6 +1002,10 @@ CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_DECOMPRESS_LZO=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/s5p6440_defconfig b/arch/arm/configs/s5p6440_defconfig new file mode 100644 index 00000000000..279a15e5311 --- /dev/null +++ b/arch/arm/configs/s5p6440_defconfig @@ -0,0 +1,969 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.33-rc2 +# Sat Jan 9 16:33:55 2010 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_NO_IOPORT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +# CONFIG_SYSVIPC is not set +# CONFIG_BSD_PROCESS_ACCT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set +# CONFIG_FREEZER is not set + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_DOVE is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +CONFIG_ARCH_S5P6440=y +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_BCMRING is not set +# CONFIG_ARCH_U8500 is not set +CONFIG_PLAT_SAMSUNG=y +CONFIG_SAMSUNG_CLKSRC=y +CONFIG_SAMSUNG_IRQ_VIC_TIMER=y +CONFIG_SAMSUNG_IRQ_UART=y +CONFIG_SAMSUNG_GPIO_EXTRA=0 +CONFIG_PLAT_S3C=y + +# +# Boot options +# +CONFIG_S3C_BOOT_ERROR_RESET=y +CONFIG_S3C_BOOT_UART_FORCE_FIFO=y + +# +# Power management +# +CONFIG_S3C_LOWLEVEL_UART_PORT=1 +CONFIG_S3C_GPIO_SPACE=0 +CONFIG_S3C_GPIO_TRACK=y +CONFIG_PLAT_S5P=y +CONFIG_CPU_S5P6440_INIT=y +CONFIG_CPU_S5P6440_CLOCK=y +CONFIG_CPU_S5P6440=y +CONFIG_MACH_SMDK6440=y + +# +# Processor Type +# +CONFIG_CPU_V6=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_32v6=y +CONFIG_CPU_ABRT_EV6=y +CONFIG_CPU_PABRT_V6=y +CONFIG_CPU_CACHE_V6=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V6=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 +# CONFIG_ARM_ERRATA_411920 is not set +CONFIG_ARM_VIC=y +CONFIG_ARM_VIC_NR=2 + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_HZ=200 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=999999 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0 +CONFIG_ZBOOT_ROM_BSS=0 +CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_NET is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_MG_DISK is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_SENTELIC is not set +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_DYNAPRO is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_W90X900 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_ALTERA_PS2 is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +# CONFIG_SERIAL_8250_CONSOLE is not set +CONFIG_SERIAL_8250_NR_UARTS=3 +CONFIG_SERIAL_8250_RUNTIME_UARTS=3 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SAMSUNG=y +CONFIG_SERIAL_SAMSUNG_UARTS=4 +# CONFIG_SERIAL_SAMSUNG_DEBUG is not set +CONFIG_SERIAL_SAMSUNG_CONSOLE=y +CONFIG_SERIAL_S5P6440=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# + +# +# AC97 GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +CONFIG_DISPLAY_SUPPORT=y + +# +# Display hardware drivers +# + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set +CONFIG_GENERIC_ACL=y + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=y +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_MTD is not set +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_BLOCK=y +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set +CONFIG_DEBUG_RT_MUTEXES=y +CONFIG_DEBUG_PI_LIST=y +# CONFIG_RT_MUTEX_TESTER is not set +CONFIG_DEBUG_SPINLOCK=y +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +# CONFIG_EARLY_PRINTK is not set +# CONFIG_DEBUG_ICEDCC is not set +# CONFIG_OC_ETM is not set +CONFIG_DEBUG_S3C_UART=1 + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/s5p6442_defconfig b/arch/arm/configs/s5p6442_defconfig new file mode 100644 index 00000000000..74e20bfc048 --- /dev/null +++ b/arch/arm/configs/s5p6442_defconfig @@ -0,0 +1,883 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.33-rc4 +# Mon Jan 25 08:50:28 2010 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_NO_IOPORT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_LZO is not set +CONFIG_SWAP=y +# CONFIG_SYSVIPC is not set +# CONFIG_BSD_PROCESS_ACCT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_RD_LZO=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set +# CONFIG_FREEZER is not set + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_DOVE is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5P6440 is not set +CONFIG_ARCH_S5P6442=y +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_BCMRING is not set +# CONFIG_ARCH_U8500 is not set +CONFIG_PLAT_SAMSUNG=y +CONFIG_SAMSUNG_CLKSRC=y +CONFIG_SAMSUNG_IRQ_VIC_TIMER=y +CONFIG_SAMSUNG_IRQ_UART=y +CONFIG_SAMSUNG_GPIOLIB_4BIT=y +CONFIG_S3C_GPIO_CFG_S3C24XX=y +CONFIG_S3C_GPIO_CFG_S3C64XX=y +CONFIG_S3C_GPIO_PULL_UPDOWN=y +CONFIG_SAMSUNG_GPIO_EXTRA=0 +# CONFIG_S3C_ADC is not set + +# +# Power management +# +CONFIG_PLAT_S3C=y + +# +# Boot options +# +# CONFIG_S3C_BOOT_ERROR_RESET is not set +CONFIG_S3C_BOOT_UART_FORCE_FIFO=y +CONFIG_S3C_LOWLEVEL_UART_PORT=1 +CONFIG_S3C_GPIO_SPACE=0 +CONFIG_S3C_GPIO_TRACK=y +CONFIG_PLAT_S5P=y +CONFIG_CPU_S5P6442=y +CONFIG_MACH_SMDK6442=y + +# +# Processor Type +# +CONFIG_CPU_V6=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_32v6=y +CONFIG_CPU_ABRT_EV6=y +CONFIG_CPU_PABRT_V6=y +CONFIG_CPU_CACHE_V6=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V6=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 +# CONFIG_ARM_ERRATA_411920 is not set +CONFIG_ARM_VIC=y +CONFIG_ARM_VIC_NR=2 + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_HZ=200 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=999999 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0 +CONFIG_ZBOOT_ROM_BSS=0 +CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_NET is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_MG_DISK is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_DYNAPRO is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_W90X900 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_ALTERA_PS2 is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +# CONFIG_SERIAL_8250_CONSOLE is not set +CONFIG_SERIAL_8250_NR_UARTS=3 +CONFIG_SERIAL_8250_RUNTIME_UARTS=3 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SAMSUNG=y +CONFIG_SERIAL_SAMSUNG_UARTS=3 +# CONFIG_SERIAL_SAMSUNG_DEBUG is not set +CONFIG_SERIAL_SAMSUNG_CONSOLE=y +CONFIG_SERIAL_S5PV210=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# + +# +# AC97 GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set +CONFIG_GENERIC_ACL=y + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=y +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_MTD is not set +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_BLOCK=y +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_BSD_DISKLABEL=y +# CONFIG_MINIX_SUBPARTITION is not set +CONFIG_SOLARIS_X86_PARTITION=y +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set +CONFIG_DEBUG_RT_MUTEXES=y +CONFIG_DEBUG_PI_LIST=y +# CONFIG_RT_MUTEX_TESTER is not set +CONFIG_DEBUG_SPINLOCK=y +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_ARM_UNWIND is not set +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +# CONFIG_EARLY_PRINTK is not set +# CONFIG_DEBUG_ICEDCC is not set +# CONFIG_OC_ETM is not set +CONFIG_DEBUG_S3C_UART=1 + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +# CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_DECOMPRESS_LZO=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/s5pc110_defconfig b/arch/arm/configs/s5pc110_defconfig new file mode 100644 index 00000000000..6ea636131ac --- /dev/null +++ b/arch/arm/configs/s5pc110_defconfig @@ -0,0 +1,894 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.33-rc4 +# Wed Feb 24 15:36:54 2010 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_NO_IOPORT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_ARM_L1_CACHE_SHIFT_6=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_LZO is not set +CONFIG_SWAP=y +# CONFIG_SYSVIPC is not set +# CONFIG_BSD_PROCESS_ACCT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_RD_LZO=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set +# CONFIG_FREEZER is not set + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_DOVE is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5P6440 is not set +# CONFIG_ARCH_S5P6442 is not set +# CONFIG_ARCH_S5PC1XX is not set +CONFIG_ARCH_S5PV210=y +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_BCMRING is not set +# CONFIG_ARCH_U8500 is not set +CONFIG_PLAT_SAMSUNG=y + +# +# Boot options +# +# CONFIG_S3C_BOOT_ERROR_RESET is not set +CONFIG_S3C_BOOT_UART_FORCE_FIFO=y +CONFIG_S3C_LOWLEVEL_UART_PORT=1 +CONFIG_SAMSUNG_CLKSRC=y +CONFIG_SAMSUNG_IRQ_VIC_TIMER=y +CONFIG_SAMSUNG_IRQ_UART=y +CONFIG_SAMSUNG_GPIOLIB_4BIT=y +CONFIG_S3C_GPIO_CFG_S3C24XX=y +CONFIG_S3C_GPIO_CFG_S3C64XX=y +CONFIG_S3C_GPIO_PULL_UPDOWN=y +CONFIG_SAMSUNG_GPIO_EXTRA=0 +CONFIG_S3C_GPIO_SPACE=0 +CONFIG_S3C_GPIO_TRACK=y +# CONFIG_S3C_ADC is not set + +# +# Power management +# +CONFIG_PLAT_S5P=y +CONFIG_CPU_S5PV210=y +# CONFIG_MACH_SMDKV210 is not set +CONFIG_MACH_SMDKC110=y + +# +# Processor Type +# +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_V7=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_ARM_THUMBEE is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +CONFIG_ARM_L1_CACHE_SHIFT=6 +# CONFIG_ARM_ERRATA_430973 is not set +# CONFIG_ARM_ERRATA_458693 is not set +# CONFIG_ARM_ERRATA_460075 is not set +CONFIG_ARM_VIC=y +CONFIG_ARM_VIC_NR=2 + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_VMSPLIT_3G is not set +CONFIG_VMSPLIT_2G=y +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0x80000000 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_HZ=200 +# CONFIG_THUMB2_KERNEL is not set +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +# CONFIG_DISCONTIGMEM_MANUAL is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_HAVE_MEMORY_PRESENT=y +CONFIG_SPARSEMEM_EXTREME=y +CONFIG_SPLIT_PTLOCK_CPUS=999999 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0 +CONFIG_ZBOOT_ROM_BSS=0 +CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set +CONFIG_VFP=y +CONFIG_VFPv3=y +CONFIG_NEON=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_NET is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_MG_DISK is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_DYNAPRO is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_W90X900 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_ALTERA_PS2 is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +# CONFIG_SERIAL_8250_CONSOLE is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SAMSUNG=y +CONFIG_SERIAL_SAMSUNG_UARTS_4=y +CONFIG_SERIAL_SAMSUNG_UARTS=4 +# CONFIG_SERIAL_SAMSUNG_DEBUG is not set +CONFIG_SERIAL_SAMSUNG_CONSOLE=y +CONFIG_SERIAL_S5PV210=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# + +# +# AC97 GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set +CONFIG_GENERIC_ACL=y + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=y +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_MTD is not set +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_BLOCK=y +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_BSD_DISKLABEL=y +# CONFIG_MINIX_SUBPARTITION is not set +CONFIG_SOLARIS_X86_PARTITION=y +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_PREEMPT is not set +CONFIG_DEBUG_RT_MUTEXES=y +CONFIG_DEBUG_PI_LIST=y +# CONFIG_RT_MUTEX_TESTER is not set +CONFIG_DEBUG_SPINLOCK=y +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +CONFIG_EARLY_PRINTK=y +# CONFIG_DEBUG_ICEDCC is not set +# CONFIG_OC_ETM is not set +CONFIG_DEBUG_S3C_UART=1 + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +# CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_DECOMPRESS_LZO=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/s5pv210_defconfig b/arch/arm/configs/s5pv210_defconfig new file mode 100644 index 00000000000..3f7d47491b5 --- /dev/null +++ b/arch/arm/configs/s5pv210_defconfig @@ -0,0 +1,894 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.33-rc4 +# Wed Feb 24 15:36:16 2010 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_NO_IOPORT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_ARM_L1_CACHE_SHIFT_6=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_LZO is not set +CONFIG_SWAP=y +# CONFIG_SYSVIPC is not set +# CONFIG_BSD_PROCESS_ACCT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_RD_LZO=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set +# CONFIG_FREEZER is not set + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_DOVE is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5P6440 is not set +# CONFIG_ARCH_S5P6442 is not set +# CONFIG_ARCH_S5PC1XX is not set +CONFIG_ARCH_S5PV210=y +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_BCMRING is not set +# CONFIG_ARCH_U8500 is not set +CONFIG_PLAT_SAMSUNG=y + +# +# Boot options +# +# CONFIG_S3C_BOOT_ERROR_RESET is not set +CONFIG_S3C_BOOT_UART_FORCE_FIFO=y +CONFIG_S3C_LOWLEVEL_UART_PORT=1 +CONFIG_SAMSUNG_CLKSRC=y +CONFIG_SAMSUNG_IRQ_VIC_TIMER=y +CONFIG_SAMSUNG_IRQ_UART=y +CONFIG_SAMSUNG_GPIOLIB_4BIT=y +CONFIG_S3C_GPIO_CFG_S3C24XX=y +CONFIG_S3C_GPIO_CFG_S3C64XX=y +CONFIG_S3C_GPIO_PULL_UPDOWN=y +CONFIG_SAMSUNG_GPIO_EXTRA=0 +CONFIG_S3C_GPIO_SPACE=0 +CONFIG_S3C_GPIO_TRACK=y +# CONFIG_S3C_ADC is not set + +# +# Power management +# +CONFIG_PLAT_S5P=y +CONFIG_CPU_S5PV210=y +CONFIG_MACH_SMDKV210=y +# CONFIG_MACH_SMDKC110 is not set + +# +# Processor Type +# +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_V7=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_ARM_THUMBEE is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +CONFIG_ARM_L1_CACHE_SHIFT=6 +# CONFIG_ARM_ERRATA_430973 is not set +# CONFIG_ARM_ERRATA_458693 is not set +# CONFIG_ARM_ERRATA_460075 is not set +CONFIG_ARM_VIC=y +CONFIG_ARM_VIC_NR=2 + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_VMSPLIT_3G is not set +CONFIG_VMSPLIT_2G=y +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0x80000000 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_HZ=200 +# CONFIG_THUMB2_KERNEL is not set +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +# CONFIG_DISCONTIGMEM_MANUAL is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_HAVE_MEMORY_PRESENT=y +CONFIG_SPARSEMEM_EXTREME=y +CONFIG_SPLIT_PTLOCK_CPUS=999999 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0 +CONFIG_ZBOOT_ROM_BSS=0 +CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set +CONFIG_VFP=y +CONFIG_VFPv3=y +CONFIG_NEON=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_NET is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_MG_DISK is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_DYNAPRO is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_W90X900 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_ALTERA_PS2 is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +# CONFIG_SERIAL_8250_CONSOLE is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SAMSUNG=y +CONFIG_SERIAL_SAMSUNG_UARTS_4=y +CONFIG_SERIAL_SAMSUNG_UARTS=4 +# CONFIG_SERIAL_SAMSUNG_DEBUG is not set +CONFIG_SERIAL_SAMSUNG_CONSOLE=y +CONFIG_SERIAL_S5PV210=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# + +# +# AC97 GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set +CONFIG_GENERIC_ACL=y + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=y +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_MTD is not set +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_BLOCK=y +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_BSD_DISKLABEL=y +# CONFIG_MINIX_SUBPARTITION is not set +CONFIG_SOLARIS_X86_PARTITION=y +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_PREEMPT is not set +CONFIG_DEBUG_RT_MUTEXES=y +CONFIG_DEBUG_PI_LIST=y +# CONFIG_RT_MUTEX_TESTER is not set +CONFIG_DEBUG_SPINLOCK=y +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +CONFIG_EARLY_PRINTK=y +# CONFIG_DEBUG_ICEDCC is not set +# CONFIG_OC_ETM is not set +CONFIG_DEBUG_S3C_UART=1 + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +# CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_DECOMPRESS_LZO=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/mach-s3c6400/include/mach/entry-macro.S b/arch/arm/include/asm/entry-macro-vic2.S index fbd90d2cf35..3ceb85e4385 100644 --- a/arch/arm/mach-s3c6400/include/mach/entry-macro.S +++ b/arch/arm/include/asm/entry-macro-vic2.S @@ -1,26 +1,39 @@ -/* arch/arm/mach-s3c6400/include/mach/entry-macro.S +/* arch/arm/include/asm/entry-macro-vic2.S + * + * Originally arch/arm/mach-s3c6400/include/mach/entry-macro.S * * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * - * Low-level IRQ helper macros for the Samsung S3C64XX series + * Low-level IRQ helper macros for a device with two VICs * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ +/* This should be included from <mach/entry-macro.S> with the necessary + * defines for virtual addresses and IRQ bases for the two vics. + * + * The code needs the following defined: + * IRQ_VIC0_BASE IRQ number of VIC0's first IRQ + * IRQ_VIC1_BASE IRQ number of VIC1's first IRQ + * VA_VIC0 Virtual address of VIC0 + * VA_VIC1 Virtual address of VIC1 + * + * Note, code assumes VIC0's virtual address is an ARM immediate constant + * away from VIC1. +*/ + #include <asm/hardware/vic.h> -#include <mach/map.h> -#include <plat/irqs.h> .macro disable_fiq .endm .macro get_irqnr_preamble, base, tmp - ldr \base, =S3C_VA_VIC0 + ldr \base, =VA_VIC0 .endm .macro arch_ret_to_user, tmp1, tmp2 @@ -29,13 +42,13 @@ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp @ check the vic0 - mov \irqnr, # S3C_IRQ_OFFSET + 31 + mov \irqnr, #IRQ_VIC0_BASE + 31 ldr \irqstat, [ \base, # VIC_IRQ_STATUS ] teq \irqstat, #0 @ otherwise try vic1 - addeq \tmp, \base, #(S3C_VA_VIC1 - S3C_VA_VIC0) - addeq \irqnr, \irqnr, #32 + addeq \tmp, \base, #(VA_VIC1 - VA_VIC0) + addeq \irqnr, \irqnr, #(IRQ_VIC1_BASE - IRQ_VIC0_BASE) ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ] teqeq \irqstat, #0 diff --git a/arch/arm/include/asm/hardware/it8152.h b/arch/arm/include/asm/hardware/it8152.h index 74b5fff7f57..6700c7fc7eb 100644 --- a/arch/arm/include/asm/hardware/it8152.h +++ b/arch/arm/include/asm/hardware/it8152.h @@ -75,6 +75,18 @@ extern unsigned long it8152_base_address; IT8152_PD_IRQ(1) USB (USBR) IT8152_PD_IRQ(0) Audio controller (ACR) */ +#define IT8152_IRQ(x) (IRQ_BOARD_END + (x)) + +/* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */ +#define IT8152_LD_IRQ_COUNT 9 +#define IT8152_LP_IRQ_COUNT 16 +#define IT8152_PD_IRQ_COUNT 15 + +/* Priorities: */ +#define IT8152_PD_IRQ(i) IT8152_IRQ(i) +#define IT8152_LP_IRQ(i) (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT) +#define IT8152_LD_IRQ(i) (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT + IT8152_LP_IRQ_COUNT) + /* frequently used interrupts */ #define IT8152_PCISERR IT8152_PD_IRQ(14) #define IT8152_H2PTADR IT8152_PD_IRQ(13) diff --git a/arch/arm/include/asm/hardware/locomo.h b/arch/arm/include/asm/hardware/locomo.h index 954b1be991b..74e51d6bd93 100644 --- a/arch/arm/include/asm/hardware/locomo.h +++ b/arch/arm/include/asm/hardware/locomo.h @@ -214,4 +214,8 @@ void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int /* Frontlight control */ void locomo_frontlight_set(struct locomo_dev *dev, int duty, int vr, int bpwf); +struct locomo_platform_data { + int irq_base; /* IRQ base for cascaded on-chip IRQs */ +}; + #endif diff --git a/arch/arm/include/asm/hardware/sa1111.h b/arch/arm/include/asm/hardware/sa1111.h index 5da2595759e..92ed254c175 100644 --- a/arch/arm/include/asm/hardware/sa1111.h +++ b/arch/arm/include/asm/hardware/sa1111.h @@ -578,4 +578,8 @@ void sa1111_set_io_dir(struct sa1111_dev *sadev, unsigned int bits, unsigned int void sa1111_set_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v); void sa1111_set_sleep_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v); +struct sa1111_platform_data { + int irq_base; /* base for cascaded on-chip IRQs */ +}; + #endif /* _ASM_ARCH_SA1111 */ diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c index 786ac2b6914..50292cd9c12 100644 --- a/arch/arm/kernel/unwind.c +++ b/arch/arm/kernel/unwind.c @@ -359,7 +359,9 @@ void unwind_backtrace(struct pt_regs *regs, struct task_struct *tsk) frame.fp = regs->ARM_fp; frame.sp = regs->ARM_sp; frame.lr = regs->ARM_lr; - frame.pc = regs->ARM_pc; + /* PC might be corrupted, use LR in that case. */ + frame.pc = kernel_text_address(regs->ARM_pc) + ? regs->ARM_pc : regs->ARM_lr; } else if (tsk == current) { frame.fp = (unsigned long)__builtin_frame_address(0); frame.sp = current_sp; diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index 309f3511aa2..2500f41d8d2 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -58,6 +58,12 @@ static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id) { u32 sr = at91_sys_read(AT91_ST_SR) & irqmask; + /* + * irqs should be disabled here, but as the irq is shared they are only + * guaranteed to be off if the timer irq is registered first. + */ + WARN_ON_ONCE(!irqs_disabled()); + /* simulate "oneshot" timer with alarm */ if (sr & AT91_ST_ALMS) { clkevt.event_handler(&clkevt); @@ -132,24 +138,11 @@ clkevt32k_mode(enum clock_event_mode mode, struct clock_event_device *dev) static int clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev) { - unsigned long flags; u32 alm; int status = 0; BUG_ON(delta < 2); - /* Use "raw" primitives so we behave correctly on RT kernels. */ - raw_local_irq_save(flags); - - /* - * According to Thomas Gleixner irqs are already disabled here. Simply - * removing raw_local_irq_save above (and the matching - * raw_local_irq_restore) was not accepted. See - * http://thread.gmane.org/gmane.linux.ports.arm.kernel/41174 - * So for now (2008-11-20) just warn once if irqs were not disabled ... - */ - WARN_ON_ONCE(!raw_irqs_disabled_flags(flags)); - /* The alarm IRQ uses absolute time (now+delta), not the relative * time (delta) in our calling convention. Like all clockevents * using such "match" hardware, we have a race to defend against. @@ -169,7 +162,6 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev) alm += delta; at91_sys_write(AT91_ST_RTAR, alm); - raw_local_irq_restore(flags); return status; } diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c index 4bd56aee437..608a63240b6 100644 --- a/arch/arm/mach-at91/at91sam926x_time.c +++ b/arch/arm/mach-at91/at91sam926x_time.c @@ -62,16 +62,12 @@ static struct clocksource pit_clk = { static void pit_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev) { - unsigned long flags; - switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - /* update clocksource counter, then enable the IRQ */ - raw_local_irq_save(flags); + /* update clocksource counter */ pit_cnt += pit_cycle * PIT_PICNT(at91_sys_read(AT91_PIT_PIVR)); at91_sys_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN | AT91_PIT_PITIEN); - raw_local_irq_restore(flags); break; case CLOCK_EVT_MODE_ONESHOT: BUG(); @@ -100,6 +96,11 @@ static struct clock_event_device pit_clkevt = { */ static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id) { + /* + * irqs should be disabled here, but as the irq is shared they are only + * guaranteed to be off if the timer irq is registered first. + */ + WARN_ON_ONCE(!irqs_disabled()); /* The PIT interrupt may be disabled, and is shared */ if ((pit_clkevt.mode == CLOCK_EVT_MODE_PERIODIC) diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index 806972a68c8..5da2cf402c8 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -605,7 +605,7 @@ static struct platform_device dove_xor00_channel = { .dev = { .dma_mask = &dove_xor0_dmamask, .coherent_dma_mask = DMA_BIT_MASK(64), - .platform_data = (void *)&dove_xor00_data, + .platform_data = &dove_xor00_data, }, }; @@ -631,7 +631,7 @@ static struct platform_device dove_xor01_channel = { .dev = { .dma_mask = &dove_xor0_dmamask, .coherent_dma_mask = DMA_BIT_MASK(64), - .platform_data = (void *)&dove_xor01_data, + .platform_data = &dove_xor01_data, }, }; @@ -704,7 +704,7 @@ static struct platform_device dove_xor10_channel = { .dev = { .dma_mask = &dove_xor1_dmamask, .coherent_dma_mask = DMA_BIT_MASK(64), - .platform_data = (void *)&dove_xor10_data, + .platform_data = &dove_xor10_data, }, }; @@ -730,7 +730,7 @@ static struct platform_device dove_xor11_channel = { .dev = { .dma_mask = &dove_xor1_dmamask, .coherent_dma_mask = DMA_BIT_MASK(64), - .platform_data = (void *)&dove_xor11_data, + .platform_data = &dove_xor11_data, }, }; diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index f6c6196a51f..17879a876be 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -32,6 +32,12 @@ config MACH_SHEEVAPLUG Say 'Y' here if you want your kernel to support the Marvell SheevaPlug Reference Board. +config MACH_ESATA_SHEEVAPLUG + bool "Marvell eSATA SheevaPlug Reference Board" + help + Say 'Y' here if you want your kernel to support the + Marvell eSATA SheevaPlug Reference Board. + config MACH_TS219 bool "QNAP TS-110, TS-119, TS-210, TS-219 and TS-219P Turbo NAS" help @@ -46,18 +52,35 @@ config MACH_TS41X QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS devices. +config MACH_OPENRD + bool + config MACH_OPENRD_BASE bool "Marvell OpenRD Base Board" + select MACH_OPENRD help Say 'Y' here if you want your kernel to support the Marvell OpenRD Base Board. +config MACH_OPENRD_CLIENT + bool "Marvell OpenRD Client Board" + select MACH_OPENRD + help + Say 'Y' here if you want your kernel to support the + Marvell OpenRD Client Board. + config MACH_NETSPACE_V2 bool "LaCie Network Space v2 NAS Board" help Say 'Y' here if you want your kernel to support the LaCie Network Space v2 NAS. +config MACH_INETSPACE_V2 + bool "LaCie Internet Space v2 NAS Board" + help + Say 'Y' here if you want your kernel to support the + LaCie Internet Space v2 NAS. + endmenu endif diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index d4d7f53b0fb..a5530e36ba3 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -5,9 +5,11 @@ obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88f6192-nas-setup.o obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o +obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG) += sheevaplug-setup.o obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o -obj-$(CONFIG_MACH_OPENRD_BASE) += openrd_base-setup.o +obj-$(CONFIG_MACH_OPENRD) += openrd-setup.o obj-$(CONFIG_MACH_NETSPACE_V2) += netspace_v2-setup.o +obj-$(CONFIG_MACH_INETSPACE_V2) += netspace_v2-setup.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 242dd077534..f759ca24392 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -656,7 +656,7 @@ static struct platform_device kirkwood_xor00_channel = { .dev = { .dma_mask = &kirkwood_xor_dmamask, .coherent_dma_mask = DMA_BIT_MASK(64), - .platform_data = (void *)&kirkwood_xor00_data, + .platform_data = &kirkwood_xor00_data, }, }; @@ -682,7 +682,7 @@ static struct platform_device kirkwood_xor01_channel = { .dev = { .dma_mask = &kirkwood_xor_dmamask, .coherent_dma_mask = DMA_BIT_MASK(64), - .platform_data = (void *)&kirkwood_xor01_data, + .platform_data = &kirkwood_xor01_data, }, }; @@ -755,7 +755,7 @@ static struct platform_device kirkwood_xor10_channel = { .dev = { .dma_mask = &kirkwood_xor_dmamask, .coherent_dma_mask = DMA_BIT_MASK(64), - .platform_data = (void *)&kirkwood_xor10_data, + .platform_data = &kirkwood_xor10_data, }, }; @@ -781,7 +781,7 @@ static struct platform_device kirkwood_xor11_channel = { .dev = { .dma_mask = &kirkwood_xor_dmamask, .coherent_dma_mask = DMA_BIT_MASK(64), - .platform_data = (void *)&kirkwood_xor11_data, + .platform_data = &kirkwood_xor11_data, }, }; diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c index 9a064065beb..3ae158d7268 100644 --- a/arch/arm/mach-kirkwood/netspace_v2-setup.c +++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c @@ -182,8 +182,14 @@ static struct platform_device netspace_v2_gpio_buttons = { static struct gpio_led netspace_v2_gpio_led_pins[] = { { - .name = "ns_v2:red:fail", - .gpio = NETSPACE_V2_GPIO_RED_LED, + .name = "ns_v2:blue:sata", + .default_trigger = "default-on", + .gpio = NETSPACE_V2_GPIO_BLUE_LED_CMD, + .active_low = 1, + }, + { + .name = "ns_v2:red:fail", + .gpio = NETSPACE_V2_GPIO_RED_LED, }, }; @@ -202,30 +208,19 @@ static struct platform_device netspace_v2_gpio_leds = { static void __init netspace_v2_gpio_leds_init(void) { - platform_device_register(&netspace_v2_gpio_leds); + int err; - /* - * Configure the front blue LED to blink in relation with the SATA - * activity. - */ - if (gpio_request(NETSPACE_V2_GPIO_BLUE_LED_SLOW, - "SATA blue LED slow") != 0) - return; - if (gpio_direction_output(NETSPACE_V2_GPIO_BLUE_LED_SLOW, 0) != 0) - goto err_free_1; - if (gpio_request(NETSPACE_V2_GPIO_BLUE_LED_CMD, - "SATA blue LED command") != 0) - goto err_free_1; - if (gpio_direction_output(NETSPACE_V2_GPIO_BLUE_LED_CMD, 0) != 0) - goto err_free_2; - - return; - -err_free_2: - gpio_free(NETSPACE_V2_GPIO_BLUE_LED_CMD); -err_free_1: - gpio_free(NETSPACE_V2_GPIO_BLUE_LED_SLOW); - pr_err("netspace_v2: failed to configure SATA blue LED\n"); + /* Configure register slow_led to allow SATA activity LED blinking */ + err = gpio_request(NETSPACE_V2_GPIO_BLUE_LED_SLOW, "blue LED slow"); + if (err == 0) { + err = gpio_direction_output(NETSPACE_V2_GPIO_BLUE_LED_SLOW, 0); + if (err) + gpio_free(NETSPACE_V2_GPIO_BLUE_LED_SLOW); + } + if (err) + pr_err("netspace_v2: failed to configure blue LED slow GPIO\n"); + + platform_device_register(&netspace_v2_gpio_leds); } /***************************************************************************** @@ -314,6 +309,7 @@ static void __init netspace_v2_init(void) pr_err("netspace_v2: failed to configure power-off GPIO\n"); } +#ifdef CONFIG_MACH_NETSPACE_V2 MACHINE_START(NETSPACE_V2, "LaCie Network Space v2") .phys_io = KIRKWOOD_REGS_PHYS_BASE, .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, @@ -323,3 +319,16 @@ MACHINE_START(NETSPACE_V2, "LaCie Network Space v2") .init_irq = kirkwood_init_irq, .timer = &netspace_v2_timer, MACHINE_END +#endif + +#ifdef CONFIG_MACH_INETSPACE_V2 +MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2") + .phys_io = KIRKWOOD_REGS_PHYS_BASE, + .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .init_machine = netspace_v2_init, + .map_io = kirkwood_map_io, + .init_irq = kirkwood_init_irq, + .timer = &netspace_v2_timer, +MACHINE_END +#endif diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c new file mode 100644 index 00000000000..ad3f1ec3379 --- /dev/null +++ b/arch/arm/mach-kirkwood/openrd-setup.c @@ -0,0 +1,118 @@ +/* + * arch/arm/mach-kirkwood/openrd-setup.c + * + * Marvell OpenRD (Base|Client) Board Setup + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> +#include <linux/ata_platform.h> +#include <linux/mv643xx_eth.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <mach/kirkwood.h> +#include <plat/mvsdio.h> +#include "common.h" +#include "mpp.h" + +static struct mtd_partition openrd_nand_parts[] = { + { + .name = "u-boot", + .offset = 0, + .size = SZ_1M, + .mask_flags = MTD_WRITEABLE + }, { + .name = "uImage", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_4M + }, { + .name = "root", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL + }, +}; + +static struct mv643xx_eth_platform_data openrd_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(8), +}; + +static struct mv643xx_eth_platform_data openrd_ge01_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(24), +}; + +static struct mv_sata_platform_data openrd_sata_data = { + .n_ports = 2, +}; + +static struct mvsdio_platform_data openrd_mvsdio_data = { + .gpio_card_detect = 29, /* MPP29 used as SD card detect */ +}; + +static unsigned int openrd_mpp_config[] __initdata = { + MPP29_GPIO, + 0 +}; + +static void __init openrd_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_init(); + kirkwood_mpp_conf(openrd_mpp_config); + + kirkwood_uart0_init(); + kirkwood_nand_init(ARRAY_AND_SIZE(openrd_nand_parts), 25); + + kirkwood_ehci_init(); + + kirkwood_ge00_init(&openrd_ge00_data); + if (machine_is_openrd_client()) + kirkwood_ge01_init(&openrd_ge01_data); + kirkwood_sata_init(&openrd_sata_data); + kirkwood_sdio_init(&openrd_mvsdio_data); + + kirkwood_i2c_init(); +} + +static int __init openrd_pci_init(void) +{ + if (machine_is_openrd_base() || machine_is_openrd_client()) + kirkwood_pcie_init(); + + return 0; +} +subsys_initcall(openrd_pci_init); + +#ifdef CONFIG_MACH_OPENRD_BASE +MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board") + /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */ + .phys_io = KIRKWOOD_REGS_PHYS_BASE, + .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .init_machine = openrd_init, + .map_io = kirkwood_map_io, + .init_irq = kirkwood_init_irq, + .timer = &kirkwood_timer, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_OPENRD_CLIENT +MACHINE_START(OPENRD_CLIENT, "Marvell OpenRD Client Board") + /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */ + .phys_io = KIRKWOOD_REGS_PHYS_BASE, + .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .init_machine = openrd_init, + .map_io = kirkwood_map_io, + .init_irq = kirkwood_init_irq, + .timer = &kirkwood_timer, +MACHINE_END +#endif diff --git a/arch/arm/mach-kirkwood/openrd_base-setup.c b/arch/arm/mach-kirkwood/openrd_base-setup.c deleted file mode 100644 index 77617c72229..00000000000 --- a/arch/arm/mach-kirkwood/openrd_base-setup.c +++ /dev/null @@ -1,96 +0,0 @@ -/* - * arch/arm/mach-kirkwood/openrd_base-setup.c - * - * Marvell OpenRD Base Board Setup - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/mtd/partitions.h> -#include <linux/ata_platform.h> -#include <linux/mv643xx_eth.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <mach/kirkwood.h> -#include <plat/mvsdio.h> -#include "common.h" -#include "mpp.h" - -static struct mtd_partition openrd_base_nand_parts[] = { - { - .name = "u-boot", - .offset = 0, - .size = SZ_1M - }, { - .name = "uImage", - .offset = MTDPART_OFS_NXTBLK, - .size = SZ_4M - }, { - .name = "root", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL - }, -}; - -static struct mv643xx_eth_platform_data openrd_base_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(8), -}; - -static struct mv_sata_platform_data openrd_base_sata_data = { - .n_ports = 2, -}; - -static struct mvsdio_platform_data openrd_base_mvsdio_data = { - .gpio_card_detect = 29, /* MPP29 used as SD card detect */ -}; - -static unsigned int openrd_base_mpp_config[] __initdata = { - MPP29_GPIO, - 0 -}; - -static void __init openrd_base_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_init(); - kirkwood_mpp_conf(openrd_base_mpp_config); - - kirkwood_uart0_init(); - kirkwood_nand_init(ARRAY_AND_SIZE(openrd_base_nand_parts), 25); - - kirkwood_ehci_init(); - - kirkwood_ge00_init(&openrd_base_ge00_data); - kirkwood_sata_init(&openrd_base_sata_data); - kirkwood_sdio_init(&openrd_base_mvsdio_data); - - kirkwood_i2c_init(); -} - -static int __init openrd_base_pci_init(void) -{ - if (machine_is_openrd_base()) - kirkwood_pcie_init(); - - return 0; - } -subsys_initcall(openrd_base_pci_init); - - -MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board") - /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */ - .phys_io = KIRKWOOD_REGS_PHYS_BASE, - .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, - .boot_params = 0x00000100, - .init_machine = openrd_base_init, - .map_io = kirkwood_map_io, - .init_irq = kirkwood_init_irq, - .timer = &kirkwood_timer, -MACHINE_END diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c index c7319eeac8b..a00879d34d5 100644 --- a/arch/arm/mach-kirkwood/sheevaplug-setup.c +++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c @@ -11,6 +11,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> +#include <linux/ata_platform.h> #include <linux/mtd/partitions.h> #include <linux/mv643xx_eth.h> #include <linux/gpio.h> @@ -42,10 +43,19 @@ static struct mv643xx_eth_platform_data sheevaplug_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(0), }; +static struct mv_sata_platform_data sheeva_esata_sata_data = { + .n_ports = 2, +}; + static struct mvsdio_platform_data sheevaplug_mvsdio_data = { /* unfortunately the CD signal has not been connected */ }; +static struct mvsdio_platform_data sheeva_esata_mvsdio_data = { + .gpio_write_protect = 44, /* MPP44 used as SD write protect */ + .gpio_card_detect = 47, /* MPP47 used as SD card detect */ +}; + static struct gpio_led sheevaplug_led_pins[] = { { .name = "plug:green:health", @@ -74,13 +84,26 @@ static unsigned int sheevaplug_mpp_config[] __initdata = { 0 }; +static unsigned int sheeva_esata_mpp_config[] __initdata = { + MPP29_GPIO, /* USB Power Enable */ + MPP44_GPIO, /* SD Write Protect */ + MPP47_GPIO, /* SD Card Detect */ + MPP49_GPIO, /* LED Green */ + 0 +}; + static void __init sheevaplug_init(void) { /* * Basic setup. Needs to be called early. */ kirkwood_init(); - kirkwood_mpp_conf(sheevaplug_mpp_config); + + /* setup gpio pin select */ + if (machine_is_sheeva_esata()) + kirkwood_mpp_conf(sheeva_esata_mpp_config); + else + kirkwood_mpp_conf(sheevaplug_mpp_config); kirkwood_uart0_init(); kirkwood_nand_init(ARRAY_AND_SIZE(sheevaplug_nand_parts), 25); @@ -91,11 +114,21 @@ static void __init sheevaplug_init(void) kirkwood_ehci_init(); kirkwood_ge00_init(&sheevaplug_ge00_data); - kirkwood_sdio_init(&sheevaplug_mvsdio_data); + + /* honor lower power consumption for plugs with out eSATA */ + if (machine_is_sheeva_esata()) + kirkwood_sata_init(&sheeva_esata_sata_data); + + /* enable sd wp and sd cd on plugs with esata */ + if (machine_is_sheeva_esata()) + kirkwood_sdio_init(&sheeva_esata_mvsdio_data); + else + kirkwood_sdio_init(&sheevaplug_mvsdio_data); platform_device_register(&sheevaplug_leds); } +#ifdef CONFIG_MACH_SHEEVAPLUG MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board") /* Maintainer: shadi Ammouri <shadi@marvell.com> */ .phys_io = KIRKWOOD_REGS_PHYS_BASE, @@ -106,3 +139,16 @@ MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board") .init_irq = kirkwood_init_irq, .timer = &kirkwood_timer, MACHINE_END +#endif + +#ifdef CONFIG_MACH_ESATA_SHEEVAPLUG +MACHINE_START(ESATA_SHEEVAPLUG, "Marvell eSATA SheevaPlug Reference Board") + .phys_io = KIRKWOOD_REGS_PHYS_BASE, + .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .init_machine = sheevaplug_init, + .map_io = kirkwood_map_io, + .init_irq = kirkwood_init_irq, + .timer = &kirkwood_timer, +MACHINE_END +#endif diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig index c6a564fc4a7..6ab843eaa35 100644 --- a/arch/arm/mach-mmp/Kconfig +++ b/arch/arm/mach-mmp/Kconfig @@ -1,6 +1,6 @@ if ARCH_MMP -menu "Marvell PXA168/910 Implmentations" +menu "Marvell PXA168/910/MMP2 Implmentations" config MACH_ASPENITE bool "Marvell's PXA168 Aspenite Development Board" @@ -16,6 +16,13 @@ config MACH_ZYLONITE2 Say 'Y' here if you want to support the Marvell PXA168-based Zylonite2 Development Board. +config MACH_AVENGERS_LITE + bool "Marvell's PXA168 Avengers Lite Development Board" + select CPU_PXA168 + help + Say 'Y' here if you want to support the Marvell PXA168-based + Avengers Lite Development Board. + config MACH_TAVOREVB bool "Marvell's PXA910 TavorEVB Development Board" select CPU_PXA910 @@ -30,6 +37,26 @@ config MACH_TTC_DKB Say 'Y' here if you want to support the Marvell PXA910-based TTC_DKB Development Board. +config MACH_FLINT + bool "Marvell's Flint Development Platform" + select CPU_MMP2 + help + Say 'Y' here if you want to support the Marvell MMP2-based + Flint Development Platform. + MMP2-based board can't be co-existed with PXA168-based & + PXA910-based development board. Since MMP2 is compatible to + ARMv6 architecture. + +config MACH_MARVELL_JASPER + bool "Marvell's Jasper Development Platform" + select CPU_MMP2 + help + Say 'Y' here if you want to support the Marvell MMP2-base + Jasper Development Platform. + MMP2-based board can't be co-existed with PXA168-based & + PXA910-based development board. Since MMP2 is compatible to + ARMv6 architecture. + endmenu config CPU_PXA168 @@ -44,4 +71,10 @@ config CPU_PXA910 help Select code specific to PXA910 +config CPU_MMP2 + bool + select CPU_V6 + select CPU_32v6K + help + Select code specific to MMP2. MMP2 is ARMv6 compatible. endif diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile index 6883e658488..8b66d06739c 100644 --- a/arch/arm/mach-mmp/Makefile +++ b/arch/arm/mach-mmp/Makefile @@ -2,14 +2,18 @@ # Makefile for Marvell's PXA168 processors line # -obj-y += common.o clock.o devices.o irq.o time.o +obj-y += common.o clock.o devices.o time.o # SoC support -obj-$(CONFIG_CPU_PXA168) += pxa168.o -obj-$(CONFIG_CPU_PXA910) += pxa910.o +obj-$(CONFIG_CPU_PXA168) += pxa168.o irq-pxa168.o +obj-$(CONFIG_CPU_PXA910) += pxa910.o irq-pxa168.o +obj-$(CONFIG_CPU_MMP2) += mmp2.o irq-mmp2.o # board support obj-$(CONFIG_MACH_ASPENITE) += aspenite.o obj-$(CONFIG_MACH_ZYLONITE2) += aspenite.o +obj-$(CONFIG_MACH_AVENGERS_LITE)+= avengers_lite.o obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o obj-$(CONFIG_MACH_TTC_DKB) += ttc_dkb.o +obj-$(CONFIG_MACH_FLINT) += flint.o +obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o diff --git a/arch/arm/mach-mmp/avengers_lite.c b/arch/arm/mach-mmp/avengers_lite.c new file mode 100644 index 00000000000..8c3fa5d14f4 --- /dev/null +++ b/arch/arm/mach-mmp/avengers_lite.c @@ -0,0 +1,51 @@ +/* + * linux/arch/arm/mach-mmp/avengers_lite.c + * + * Support for the Marvell PXA168-based Avengers lite Development Platform. + * + * Copyright (C) 2009-2010 Marvell International Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <mach/addr-map.h> +#include <mach/mfp-pxa168.h> +#include <mach/pxa168.h> +#include <mach/irqs.h> + + +#include "common.h" +#include <linux/delay.h> + +/* Avengers lite MFP configurations */ +static unsigned long avengers_lite_pin_config_V16F[] __initdata = { + /* DEBUG_UART */ + GPIO88_UART2_TXD, + GPIO89_UART2_RXD, +}; + +static void __init avengers_lite_init(void) +{ + mfp_config(ARRAY_AND_SIZE(avengers_lite_pin_config_V16F)); + + /* on-chip devices */ + pxa168_add_uart(2); +} + +MACHINE_START(AVENGERS_LITE, "PXA168 Avengers lite Development Platform") + .phys_io = APB_PHYS_BASE, + .boot_params = 0x00000100, + .io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc, + .map_io = pxa_map_io, + .init_irq = pxa168_init_irq, + .timer = &pxa168_timer, + .init_machine = avengers_lite_init, +MACHINE_END diff --git a/arch/arm/mach-mmp/common.h b/arch/arm/mach-mmp/common.h index c33fbbc4941..b4a0ba05a0f 100644 --- a/arch/arm/mach-mmp/common.h +++ b/arch/arm/mach-mmp/common.h @@ -3,11 +3,15 @@ struct sys_timer; extern void timer_init(int irq); +extern void mmp2_clear_pmic_int(void); extern struct sys_timer pxa168_timer; extern struct sys_timer pxa910_timer; +extern struct sys_timer mmp2_timer; extern void __init pxa168_init_irq(void); extern void __init pxa910_init_irq(void); +extern void __init mmp2_init_icu(void); +extern void __init mmp2_init_irq(void); extern void __init icu_init_irq(void); extern void __init pxa_map_io(void); diff --git a/arch/arm/mach-mmp/flint.c b/arch/arm/mach-mmp/flint.c new file mode 100644 index 00000000000..4ec7709a346 --- /dev/null +++ b/arch/arm/mach-mmp/flint.c @@ -0,0 +1,123 @@ +/* + * linux/arch/arm/mach-mmp/flint.c + * + * Support for the Marvell Flint Development Platform. + * + * Copyright (C) 2009 Marvell International Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/smc91x.h> +#include <linux/io.h> +#include <linux/gpio.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <mach/addr-map.h> +#include <mach/mfp-mmp2.h> +#include <mach/mmp2.h> + +#include "common.h" + +static unsigned long flint_pin_config[] __initdata = { + /* UART1 */ + GPIO45_UART1_RXD, + GPIO46_UART1_TXD, + + /* UART2 */ + GPIO47_UART2_RXD, + GPIO48_UART2_TXD, + + /* SMC */ + GPIO151_SMC_SCLK, + GPIO145_SMC_nCS0, + GPIO146_SMC_nCS1, + GPIO152_SMC_BE0, + GPIO153_SMC_BE1, + GPIO154_SMC_IRQ, + GPIO113_SMC_RDY, + + /*Ethernet*/ + GPIO155_GPIO155, + + /* DFI */ + GPIO168_DFI_D0, + GPIO167_DFI_D1, + GPIO166_DFI_D2, + GPIO165_DFI_D3, + GPIO107_DFI_D4, + GPIO106_DFI_D5, + GPIO105_DFI_D6, + GPIO104_DFI_D7, + GPIO111_DFI_D8, + GPIO164_DFI_D9, + GPIO163_DFI_D10, + GPIO162_DFI_D11, + GPIO161_DFI_D12, + GPIO110_DFI_D13, + GPIO109_DFI_D14, + GPIO108_DFI_D15, + GPIO143_ND_nCS0, + GPIO144_ND_nCS1, + GPIO147_ND_nWE, + GPIO148_ND_nRE, + GPIO150_ND_ALE, + GPIO149_ND_CLE, + GPIO112_ND_RDY0, + GPIO160_ND_RDY1, +}; + +static struct smc91x_platdata flint_smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, +}; + +static struct resource smc91x_resources[] = { + [0] = { + .start = SMC_CS1_PHYS_BASE + 0x300, + .end = SMC_CS1_PHYS_BASE + 0xfffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = gpio_to_irq(155), + .end = gpio_to_irq(155), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, + } +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .dev = { + .platform_data = &flint_smc91x_info, + }, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; + +static void __init flint_init(void) +{ + mfp_config(ARRAY_AND_SIZE(flint_pin_config)); + + /* on-chip devices */ + mmp2_add_uart(1); + mmp2_add_uart(2); + + /* off-chip devices */ + platform_device_register(&smc91x_device); +} + +MACHINE_START(FLINT, "Flint Development Platform") + .phys_io = APB_PHYS_BASE, + .boot_params = 0x00000100, + .io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc, + .map_io = pxa_map_io, + .init_irq = mmp2_init_irq, + .timer = &mmp2_timer, + .init_machine = flint_init, +MACHINE_END diff --git a/arch/arm/mach-mmp/include/mach/cputype.h b/arch/arm/mach-mmp/include/mach/cputype.h index 25e797b0908..83b18721d93 100644 --- a/arch/arm/mach-mmp/include/mach/cputype.h +++ b/arch/arm/mach-mmp/include/mach/cputype.h @@ -8,6 +8,7 @@ * * PXA168 A0 0x41159263 0x56158400 0x00A0A333 * PXA910 Y0 0x41159262 0x56158000 0x00F0C910 + * MMP2 Z0 0x560f5811 */ #ifdef CONFIG_CPU_PXA168 @@ -24,7 +25,15 @@ # define __cpu_is_pxa910(id) (0) #endif +#ifdef CONFIG_CPU_MMP2 +# define __cpu_is_mmp2(id) \ + ({ unsigned int _id = ((id) >> 8) & 0xff; _id == 0x58; }) +#else +# define __cpu_is_mmp2(id) (0) +#endif + #define cpu_is_pxa168() ({ __cpu_is_pxa168(read_cpuid_id()); }) #define cpu_is_pxa910() ({ __cpu_is_pxa910(read_cpuid_id()); }) +#define cpu_is_mmp2() ({ __cpu_is_mmp2(read_cpuid_id()); }) #endif /* __ASM_MACH_CPUTYPE_H */ diff --git a/arch/arm/mach-mmp/include/mach/devices.h b/arch/arm/mach-mmp/include/mach/devices.h index 24585397217..1fa0a492454 100644 --- a/arch/arm/mach-mmp/include/mach/devices.h +++ b/arch/arm/mach-mmp/include/mach/devices.h @@ -34,4 +34,16 @@ struct pxa_device_desc pxa910_device_##_name __initdata = { \ .size = _size, \ .dma = { _dma }, \ }; + +#define MMP2_DEVICE(_name, _drv, _id, _irq, _start, _size, _dma...) \ +struct pxa_device_desc mmp2_device_##_name __initdata = { \ + .dev_name = "mmp2-" #_name, \ + .drv_name = _drv, \ + .id = _id, \ + .irq = IRQ_MMP2_##_irq, \ + .start = _start, \ + .size = _size, \ + .dma = { _dma }, \ +} + extern int pxa_register_device(struct pxa_device_desc *, void *, size_t); diff --git a/arch/arm/mach-mmp/include/mach/entry-macro.S b/arch/arm/mach-mmp/include/mach/entry-macro.S index 6d3cd35478b..c42d9d4e892 100644 --- a/arch/arm/mach-mmp/include/mach/entry-macro.S +++ b/arch/arm/mach-mmp/include/mach/entry-macro.S @@ -15,7 +15,12 @@ .endm .macro get_irqnr_preamble, base, tmp - ldr \base, =ICU_AP_IRQ_SEL_INT_NUM + mrc p15, 0, \tmp, c0, c0, 0 @ CPUID + and \tmp, \tmp, #0xff00 + cmp \tmp, #0x5800 + ldr \base, =ICU_VIRT_BASE + addne \base, \base, #0x10c @ PJ1 AP INT SEL register + addeq \base, \base, #0x104 @ PJ4 IRQ SEL register .endm .macro get_irqnr_and_base, irqnr, irqstat, base, tmp diff --git a/arch/arm/mach-mmp/include/mach/irqs.h b/arch/arm/mach-mmp/include/mach/irqs.h index d68871b0f28..02701196ea0 100644 --- a/arch/arm/mach-mmp/include/mach/irqs.h +++ b/arch/arm/mach-mmp/include/mach/irqs.h @@ -113,10 +113,119 @@ #define IRQ_PXA910_AP_PMU 60 #define IRQ_PXA910_SM_INT 63 /* from PinMux */ -#define IRQ_GPIO_START 64 -#define IRQ_GPIO_NUM 128 +/* + * Interrupt numbers for MMP2 + */ +#define IRQ_MMP2_NONE (-1) +#define IRQ_MMP2_SSP1 0 +#define IRQ_MMP2_SSP2 1 +#define IRQ_MMP2_SSPA1 2 +#define IRQ_MMP2_SSPA2 3 +#define IRQ_MMP2_PMIC_MUX 4 /* PMIC & Charger */ +#define IRQ_MMP2_RTC_MUX 5 +#define IRQ_MMP2_TWSI1 7 +#define IRQ_MMP2_GPU 8 +#define IRQ_MMP2_KEYPAD 9 +#define IRQ_MMP2_ROTARY 10 +#define IRQ_MMP2_TRACKBALL 11 +#define IRQ_MMP2_ONEWIRE 12 +#define IRQ_MMP2_TIMER1 13 +#define IRQ_MMP2_TIMER2 14 +#define IRQ_MMP2_TIMER3 15 +#define IRQ_MMP2_RIPC 16 +#define IRQ_MMP2_TWSI_MUX 17 /* TWSI2 ~ TWSI6 */ +#define IRQ_MMP2_HDMI 19 +#define IRQ_MMP2_SSP3 20 +#define IRQ_MMP2_SSP4 21 +#define IRQ_MMP2_USB_HS1 22 +#define IRQ_MMP2_USB_HS2 23 +#define IRQ_MMP2_UART3 24 +#define IRQ_MMP2_UART1 27 +#define IRQ_MMP2_UART2 28 +#define IRQ_MMP2_MIPI_DSI 29 +#define IRQ_MMP2_CI2 30 +#define IRQ_MMP2_PMU_TIMER1 31 +#define IRQ_MMP2_PMU_TIMER2 32 +#define IRQ_MMP2_PMU_TIMER3 33 +#define IRQ_MMP2_USB_FS 34 +#define IRQ_MMP2_MISC_MUX 35 +#define IRQ_MMP2_WDT1 36 +#define IRQ_MMP2_NAND_DMA 37 +#define IRQ_MMP2_USIM 38 +#define IRQ_MMP2_MMC 39 +#define IRQ_MMP2_WTM 40 +#define IRQ_MMP2_LCD 41 +#define IRQ_MMP2_CI 42 +#define IRQ_MMP2_IRE 43 +#define IRQ_MMP2_USB_OTG 44 +#define IRQ_MMP2_NAND 45 +#define IRQ_MMP2_UART4 46 +#define IRQ_MMP2_DMA_FIQ 47 +#define IRQ_MMP2_DMA_RIQ 48 +#define IRQ_MMP2_GPIO 49 +#define IRQ_MMP2_SSP_MUX 51 +#define IRQ_MMP2_MMC2 52 +#define IRQ_MMP2_MMC3 53 +#define IRQ_MMP2_MMC4 54 +#define IRQ_MMP2_MIPI_HSI 55 +#define IRQ_MMP2_MSP 58 +#define IRQ_MMP2_MIPI_SLIM_DMA 59 +#define IRQ_MMP2_PJ4_FREQ_CHG 60 +#define IRQ_MMP2_MIPI_SLIM 62 +#define IRQ_MMP2_SM 63 + +#define IRQ_MMP2_MUX_BASE 64 + +/* secondary interrupt of INT #4 */ +#define IRQ_MMP2_PMIC_BASE (IRQ_MMP2_MUX_BASE) +#define IRQ_MMP2_CHARGER (IRQ_MMP2_PMIC_BASE + 0) +#define IRQ_MMP2_PMIC (IRQ_MMP2_PMIC_BASE + 1) + +/* secondary interrupt of INT #5 */ +#define IRQ_MMP2_RTC_BASE (IRQ_MMP2_PMIC_BASE + 2) +#define IRQ_MMP2_RTC_ALARM (IRQ_MMP2_RTC_BASE + 0) +#define IRQ_MMP2_RTC (IRQ_MMP2_RTC_BASE + 1) + +/* secondary interrupt of INT #17 */ +#define IRQ_MMP2_TWSI_BASE (IRQ_MMP2_RTC_BASE + 2) +#define IRQ_MMP2_TWSI2 (IRQ_MMP2_TWSI_BASE + 0) +#define IRQ_MMP2_TWSI3 (IRQ_MMP2_TWSI_BASE + 1) +#define IRQ_MMP2_TWSI4 (IRQ_MMP2_TWSI_BASE + 2) +#define IRQ_MMP2_TWSI5 (IRQ_MMP2_TWSI_BASE + 3) +#define IRQ_MMP2_TWSI6 (IRQ_MMP2_TWSI_BASE + 4) + +/* secondary interrupt of INT #35 */ +#define IRQ_MMP2_MISC_BASE (IRQ_MMP2_TWSI_BASE + 5) +#define IRQ_MMP2_PERF (IRQ_MMP2_MISC_BASE + 0) +#define IRQ_MMP2_L2_PA_ECC (IRQ_MMP2_MISC_BASE + 1) +#define IRQ_MMP2_L2_ECC (IRQ_MMP2_MISC_BASE + 2) +#define IRQ_MMP2_L2_UECC (IRQ_MMP2_MISC_BASE + 3) +#define IRQ_MMP2_DDR (IRQ_MMP2_MISC_BASE + 4) +#define IRQ_MMP2_FAB0_TIMEOUT (IRQ_MMP2_MISC_BASE + 5) +#define IRQ_MMP2_FAB1_TIMEOUT (IRQ_MMP2_MISC_BASE + 6) +#define IRQ_MMP2_FAB2_TIMEOUT (IRQ_MMP2_MISC_BASE + 7) +#define IRQ_MMP2_THERMAL (IRQ_MMP2_MISC_BASE + 9) +#define IRQ_MMP2_MAIN_PMU (IRQ_MMP2_MISC_BASE + 10) +#define IRQ_MMP2_WDT2 (IRQ_MMP2_MISC_BASE + 11) +#define IRQ_MMP2_CORESIGHT (IRQ_MMP2_MISC_BASE + 12) +#define IRQ_MMP2_COMMTX (IRQ_MMP2_MISC_BASE + 13) +#define IRQ_MMP2_COMMRX (IRQ_MMP2_MISC_BASE + 14) + +/* secondary interrupt of INT #51 */ +#define IRQ_MMP2_SSP_BASE (IRQ_MMP2_MISC_BASE + 15) +#define IRQ_MMP2_SSP1_SRDY (IRQ_MMP2_SSP_BASE + 0) +#define IRQ_MMP2_SSP3_SRDY (IRQ_MMP2_SSP_BASE + 1) + +#define IRQ_MMP2_MUX_END (IRQ_MMP2_SSP_BASE + 2) + +#define IRQ_GPIO_START 128 +#define IRQ_GPIO_NUM 192 #define IRQ_GPIO(x) (IRQ_GPIO_START + (x)) -#define NR_IRQS (IRQ_GPIO_START + IRQ_GPIO_NUM) +/* Board IRQ - 64 by default, increase if not enough */ +#define IRQ_BOARD_START (IRQ_GPIO_START + IRQ_GPIO_NUM) +#define IRQ_BOARD_END (IRQ_BOARD_START + 64) + +#define NR_IRQS (IRQ_BOARD_END) #endif /* __ASM_MACH_IRQS_H */ diff --git a/arch/arm/mach-mmp/include/mach/mfp-mmp2.h b/arch/arm/mach-mmp/include/mach/mfp-mmp2.h new file mode 100644 index 00000000000..9f9f8143e27 --- /dev/null +++ b/arch/arm/mach-mmp/include/mach/mfp-mmp2.h @@ -0,0 +1,240 @@ +#ifndef __ASM_MACH_MFP_MMP2_H +#define __ASM_MACH_MFP_MMP2_H + +#include <mach/mfp.h> + +#define MFP_DRIVE_VERY_SLOW (0x0 << 13) +#define MFP_DRIVE_SLOW (0x2 << 13) +#define MFP_DRIVE_MEDIUM (0x4 << 13) +#define MFP_DRIVE_FAST (0x8 << 13) + +/* GPIO */ + +/* DFI */ +#define GPIO108_DFI_D15 MFP_CFG(GPIO108, AF0) +#define GPIO109_DFI_D14 MFP_CFG(GPIO109, AF0) +#define GPIO110_DFI_D13 MFP_CFG(GPIO110, AF0) +#define GPIO161_DFI_D12 MFP_CFG(GPIO161, AF0) +#define GPIO162_DFI_D11 MFP_CFG(GPIO162, AF0) +#define GPIO163_DFI_D10 MFP_CFG(GPIO163, AF0) +#define GPIO164_DFI_D9 MFP_CFG(GPIO164, AF0) +#define GPIO111_DFI_D8 MFP_CFG(GPIO111, AF0) +#define GPIO104_DFI_D7 MFP_CFG(GPIO104, AF0) +#define GPIO105_DFI_D6 MFP_CFG(GPIO105, AF0) +#define GPIO106_DFI_D5 MFP_CFG(GPIO106, AF0) +#define GPIO107_DFI_D4 MFP_CFG(GPIO107, AF0) +#define GPIO165_DFI_D3 MFP_CFG(GPIO165, AF0) +#define GPIO166_DFI_D2 MFP_CFG(GPIO166, AF0) +#define GPIO167_DFI_D1 MFP_CFG(GPIO167, AF0) +#define GPIO168_DFI_D0 MFP_CFG(GPIO168, AF0) +#define GPIO143_ND_nCS0 MFP_CFG(GPIO143, AF0) +#define GPIO144_ND_nCS1 MFP_CFG(GPIO144, AF0) +#define GPIO147_ND_nWE MFP_CFG(GPIO147, AF0) +#define GPIO148_ND_nRE MFP_CFG(GPIO148, AF0) +#define GPIO150_ND_ALE MFP_CFG(GPIO150, AF0) +#define GPIO149_ND_CLE MFP_CFG(GPIO149, AF0) +#define GPIO112_ND_RDY0 MFP_CFG(GPIO112, AF0) +#define GPIO160_ND_RDY1 MFP_CFG(GPIO160, AF0) + +/* Static Memory Controller */ +#define GPIO145_SMC_nCS0 MFP_CFG(GPIO145, AF0) +#define GPIO146_SMC_nCS1 MFP_CFG(GPIO146, AF0) +#define GPIO152_SMC_BE0 MFP_CFG(GPIO152, AF0) +#define GPIO153_SMC_BE1 MFP_CFG(GPIO153, AF0) +#define GPIO154_SMC_IRQ MFP_CFG(GPIO154, AF0) +#define GPIO113_SMC_RDY MFP_CFG(GPIO113, AF0) +#define GPIO151_SMC_SCLK MFP_CFG(GPIO151, AF0) + +/* Ethernet */ +#define GPIO155_SM_ADVMUX MFP_CFG(GPIO155, AF2) +#define GPIO155_GPIO155 MFP_CFG(GPIO155, AF1) + +/* UART1 */ +#define GPIO45_UART1_RXD MFP_CFG(GPIO45, AF1) +#define GPIO46_UART1_TXD MFP_CFG(GPIO46, AF1) +#define GPIO29_UART1_RXD MFP_CFG(GPIO29, AF1) +#define GPIO30_UART1_TXD MFP_CFG(GPIO30, AF1) +#define GPIO31_UART1_CTS MFP_CFG(GPIO31, AF1) +#define GPIO32_UART1_RTS MFP_CFG(GPIO32, AF1) + +/* UART2 */ +#define GPIO47_UART2_RXD MFP_CFG(GPIO47, AF1) +#define GPIO48_UART2_TXD MFP_CFG(GPIO48, AF1) +#define GPIO49_UART2_CTS MFP_CFG(GPIO49, AF1) +#define GPIO50_UART2_RTS MFP_CFG(GPIO50, AF1) + +/* UART3 */ +#define GPIO51_UART3_RXD MFP_CFG(GPIO51, AF1) +#define GPIO52_UART3_TXD MFP_CFG(GPIO52, AF1) +#define GPIO53_UART3_CTS MFP_CFG(GPIO53, AF1) +#define GPIO54_UART3_RTS MFP_CFG(GPIO54, AF1) + +/* MMC1 */ +#define GPIO124_MMC1_DAT7 MFP_CFG_DRV(GPIO124, AF1, FAST) +#define GPIO125_MMC1_DAT6 MFP_CFG_DRV(GPIO125, AF1, FAST) +#define GPIO129_MMC1_DAT5 MFP_CFG_DRV(GPIO129, AF1, FAST) +#define GPIO130_MMC1_DAT4 MFP_CFG_DRV(GPIO130, AF1, FAST) +#define GPIO131_MMC1_DAT3 MFP_CFG_DRV(GPIO131, AF1, FAST) +#define GPIO132_MMC1_DAT2 MFP_CFG_DRV(GPIO132, AF1, FAST) +#define GPIO133_MMC1_DAT1 MFP_CFG_DRV(GPIO133, AF1, FAST) +#define GPIO134_MMC1_DAT0 MFP_CFG_DRV(GPIO134, AF1, FAST) +#define GPIO136_MMC1_CMD MFP_CFG_DRV(GPIO136, AF1, FAST) +#define GPIO139_MMC1_CLK MFP_CFG_DRV(GPIO139, AF1, FAST) +#define GPIO140_MMC1_CD MFP_CFG_DRV(GPIO140, AF1, FAST) +#define GPIO141_MMC1_WP MFP_CFG_DRV(GPIO141, AF1, FAST) + +/*MMC2*/ +#define GPIO37_MMC2_DAT3 MFP_CFG_DRV(GPIO37, AF1, FAST) +#define GPIO38_MMC2_DAT2 MFP_CFG_DRV(GPIO38, AF1, FAST) +#define GPIO39_MMC2_DAT1 MFP_CFG_DRV(GPIO39, AF1, FAST) +#define GPIO40_MMC2_DAT0 MFP_CFG_DRV(GPIO40, AF1, FAST) +#define GPIO41_MMC2_CMD MFP_CFG_DRV(GPIO41, AF1, FAST) +#define GPIO42_MMC2_CLK MFP_CFG_DRV(GPIO42, AF1, FAST) + +/*MMC3*/ +#define GPIO165_MMC3_DAT7 MFP_CFG_DRV(GPIO165, AF2, FAST) +#define GPIO162_MMC3_DAT6 MFP_CFG_DRV(GPIO162, AF2, FAST) +#define GPIO166_MMC3_DAT5 MFP_CFG_DRV(GPIO166, AF2, FAST) +#define GPIO163_MMC3_DAT4 MFP_CFG_DRV(GPIO163, AF2, FAST) +#define GPIO167_MMC3_DAT3 MFP_CFG_DRV(GPIO167, AF2, FAST) +#define GPIO164_MMC3_DAT2 MFP_CFG_DRV(GPIO164, AF2, FAST) +#define GPIO168_MMC3_DAT1 MFP_CFG_DRV(GPIO168, AF2, FAST) +#define GPIO111_MMC3_DAT0 MFP_CFG_DRV(GPIO111, AF2, FAST) +#define GPIO112_MMC3_CMD MFP_CFG_DRV(GPIO112, AF2, FAST) +#define GPIO151_MMC3_CLK MFP_CFG_DRV(GPIO151, AF2, FAST) + +/* LCD */ +#define GPIO74_LCD_FCLK MFP_CFG_DRV(GPIO74, AF1, FAST) +#define GPIO75_LCD_LCLK MFP_CFG_DRV(GPIO75, AF1, FAST) +#define GPIO76_LCD_PCLK MFP_CFG_DRV(GPIO76, AF1, FAST) +#define GPIO77_LCD_DENA MFP_CFG_DRV(GPIO77, AF1, FAST) +#define GPIO78_LCD_DD0 MFP_CFG_DRV(GPIO78, AF1, FAST) +#define GPIO79_LCD_DD1 MFP_CFG_DRV(GPIO79, AF1, FAST) +#define GPIO80_LCD_DD2 MFP_CFG_DRV(GPIO80, AF1, FAST) +#define GPIO81_LCD_DD3 MFP_CFG_DRV(GPIO81, AF1, FAST) +#define GPIO82_LCD_DD4 MFP_CFG_DRV(GPIO82, AF1, FAST) +#define GPIO83_LCD_DD5 MFP_CFG_DRV(GPIO83, AF1, FAST) +#define GPIO84_LCD_DD6 MFP_CFG_DRV(GPIO84, AF1, FAST) +#define GPIO85_LCD_DD7 MFP_CFG_DRV(GPIO85, AF1, FAST) +#define GPIO86_LCD_DD8 MFP_CFG_DRV(GPIO86, AF1, FAST) +#define GPIO87_LCD_DD9 MFP_CFG_DRV(GPIO87, AF1, FAST) +#define GPIO88_LCD_DD10 MFP_CFG_DRV(GPIO88, AF1, FAST) +#define GPIO89_LCD_DD11 MFP_CFG_DRV(GPIO89, AF1, FAST) +#define GPIO90_LCD_DD12 MFP_CFG_DRV(GPIO90, AF1, FAST) +#define GPIO91_LCD_DD13 MFP_CFG_DRV(GPIO91, AF1, FAST) +#define GPIO92_LCD_DD14 MFP_CFG_DRV(GPIO92, AF1, FAST) +#define GPIO93_LCD_DD15 MFP_CFG_DRV(GPIO93, AF1, FAST) +#define GPIO94_LCD_DD16 MFP_CFG_DRV(GPIO94, AF1, FAST) +#define GPIO95_LCD_DD17 MFP_CFG_DRV(GPIO95, AF1, FAST) +#define GPIO96_LCD_DD18 MFP_CFG_DRV(GPIO96, AF1, FAST) +#define GPIO97_LCD_DD19 MFP_CFG_DRV(GPIO97, AF1, FAST) +#define GPIO98_LCD_DD20 MFP_CFG_DRV(GPIO98, AF1, FAST) +#define GPIO99_LCD_DD21 MFP_CFG_DRV(GPIO99, AF1, FAST) +#define GPIO100_LCD_DD22 MFP_CFG_DRV(GPIO100, AF1, FAST) +#define GPIO101_LCD_DD23 MFP_CFG_DRV(GPIO101, AF1, FAST) +#define GPIO94_SPI_DCLK MFP_CFG_DRV(GPIO94, AF3, FAST) +#define GPIO95_SPI_CS0 MFP_CFG_DRV(GPIO95, AF3, FAST) +#define GPIO96_SPI_DIN MFP_CFG_DRV(GPIO96, AF3, FAST) +#define GPIO97_SPI_DOUT MFP_CFG_DRV(GPIO97, AF3, FAST) +#define GPIO98_LCD_RST MFP_CFG_DRV(GPIO98, AF0, FAST) + +#define GPIO114_MN_CLK_OUT MFP_CFG_DRV(GPIO114, AF1, FAST) + +/*LCD TV path*/ +#define GPIO124_LCD_DD24 MFP_CFG_DRV(GPIO124, AF2, FAST) +#define GPIO125_LCD_DD25 MFP_CFG_DRV(GPIO125, AF2, FAST) +#define GPIO126_LCD_DD33 MFP_CFG_DRV(GPIO126, AF2, FAST) +#define GPIO127_LCD_DD26 MFP_CFG_DRV(GPIO127, AF2, FAST) +#define GPIO128_LCD_DD27 MFP_CFG_DRV(GPIO128, AF2, FAST) +#define GPIO129_LCD_DD28 MFP_CFG_DRV(GPIO129, AF2, FAST) +#define GPIO130_LCD_DD29 MFP_CFG_DRV(GPIO130, AF2, FAST) +#define GPIO135_LCD_DD30 MFP_CFG_DRV(GPIO135, AF2, FAST) +#define GPIO137_LCD_DD31 MFP_CFG_DRV(GPIO137, AF2, FAST) +#define GPIO138_LCD_DD32 MFP_CFG_DRV(GPIO138, AF2, FAST) +#define GPIO140_LCD_DD34 MFP_CFG_DRV(GPIO140, AF2, FAST) +#define GPIO141_LCD_DD35 MFP_CFG_DRV(GPIO141, AF2, FAST) + +/* I2C */ +#define GPIO43_TWSI2_SCL MFP_CFG_DRV(GPIO43, AF1, SLOW) +#define GPIO44_TWSI2_SDA MFP_CFG_DRV(GPIO44, AF1, SLOW) +#define GPIO71_TWSI3_SCL MFP_CFG_DRV(GPIO71, AF1, SLOW) +#define GPIO72_TWSI3_SDA MFP_CFG_DRV(GPIO72, AF1, SLOW) +#define GPIO99_TWSI5_SCL MFP_CFG_DRV(GPIO99, AF4, SLOW) +#define GPIO100_TWSI5_SDA MFP_CFG_DRV(GPIO100, AF4, SLOW) +#define GPIO97_TWSI6_SCL MFP_CFG_DRV(GPIO97, AF2, SLOW) +#define GPIO98_TWSI6_SDA MFP_CFG_DRV(GPIO98, AF2, SLOW) + +/* SSPA1 */ +#define GPIO24_I2S_SYSCLK MFP_CFG(GPIO24, AF1) +#define GPIO25_I2S_BITCLK MFP_CFG(GPIO25, AF1) +#define GPIO26_I2S_SYNC MFP_CFG(GPIO26, AF1) +#define GPIO27_I2S_DATA_OUT MFP_CFG(GPIO27, AF1) +#define GPIO28_I2S_SDATA_IN MFP_CFG(GPIO28, AF1) +#define GPIO114_I2S_MCLK MFP_CFG(GPIO114, AF1) + +/* SSPA2 */ +#define GPIO33_SSPA2_CLK MFP_CFG(GPIO33, AF1) +#define GPIO34_SSPA2_FRM MFP_CFG(GPIO34, AF1) +#define GPIO35_SSPA2_TXD MFP_CFG(GPIO35, AF1) +#define GPIO36_SSPA2_RXD MFP_CFG(GPIO36, AF1) + +/* Keypad */ +#define GPIO00_KP_MKIN0 MFP_CFG(GPIO0, AF1) +#define GPIO01_KP_MKOUT0 MFP_CFG(GPIO1, AF1) +#define GPIO02_KP_MKIN1 MFP_CFG(GPIO2, AF1) +#define GPIO03_KP_MKOUT1 MFP_CFG(GPIO3, AF1) +#define GPIO04_KP_MKIN2 MFP_CFG(GPIO4, AF1) +#define GPIO05_KP_MKOUT2 MFP_CFG(GPIO5, AF1) +#define GPIO06_KP_MKIN3 MFP_CFG(GPIO6, AF1) +#define GPIO07_KP_MKOUT3 MFP_CFG(GPIO7, AF1) +#define GPIO08_KP_MKIN4 MFP_CFG(GPIO8, AF1) +#define GPIO09_KP_MKOUT4 MFP_CFG(GPIO9, AF1) +#define GPIO10_KP_MKIN5 MFP_CFG(GPIO10, AF1) +#define GPIO11_KP_MKOUT5 MFP_CFG(GPIO11, AF1) +#define GPIO12_KP_MKIN6 MFP_CFG(GPIO12, AF1) +#define GPIO13_KP_MKOUT6 MFP_CFG(GPIO13, AF1) +#define GPIO14_KP_MKIN7 MFP_CFG(GPIO14, AF1) +#define GPIO15_KP_MKOUT7 MFP_CFG(GPIO15, AF1) +#define GPIO16_KP_DKIN0 MFP_CFG(GPIO16, AF1) +#define GPIO17_KP_DKIN1 MFP_CFG(GPIO17, AF1) +#define GPIO18_KP_DKIN2 MFP_CFG(GPIO18, AF1) +#define GPIO19_KP_DKIN3 MFP_CFG(GPIO19, AF1) +#define GPIO20_KP_DKIN4 MFP_CFG(GPIO20, AF1) +#define GPIO21_KP_DKIN5 MFP_CFG(GPIO21, AF1) +#define GPIO22_KP_DKIN6 MFP_CFG(GPIO22, AF1) +#define GPIO23_KP_DKIN7 MFP_CFG(GPIO23, AF1) + +/* CAMERA */ +#define GPIO59_CCIC_IN7 MFP_CFG_DRV(GPIO59, AF1, FAST) +#define GPIO60_CCIC_IN6 MFP_CFG_DRV(GPIO60, AF1, FAST) +#define GPIO61_CCIC_IN5 MFP_CFG_DRV(GPIO61, AF1, FAST) +#define GPIO62_CCIC_IN4 MFP_CFG_DRV(GPIO62, AF1, FAST) +#define GPIO63_CCIC_IN3 MFP_CFG_DRV(GPIO63, AF1, FAST) +#define GPIO64_CCIC_IN2 MFP_CFG_DRV(GPIO64, AF1, FAST) +#define GPIO65_CCIC_IN1 MFP_CFG_DRV(GPIO65, AF1, FAST) +#define GPIO66_CCIC_IN0 MFP_CFG_DRV(GPIO66, AF1, FAST) +#define GPIO67_CAM_HSYNC MFP_CFG_DRV(GPIO67, AF1, FAST) +#define GPIO68_CAM_VSYNC MFP_CFG_DRV(GPIO68, AF1, FAST) +#define GPIO69_CAM_MCLK MFP_CFG_DRV(GPIO69, AF1, FAST) +#define GPIO70_CAM_PCLK MFP_CFG_DRV(GPIO70, AF1, FAST) + +/* Wifi */ +#define GPIO45_GPIO45 MFP_CFG(GPIO45, AF0) +#define GPIO46_GPIO46 MFP_CFG(GPIO46, AF0) +#define GPIO21_GPIO21 MFP_CFG(GPIO21, AF0) +#define GPIO22_GPIO22 MFP_CFG(GPIO22, AF0) +#define GPIO55_GPIO55 MFP_CFG(GPIO55, AF0) +#define GPIO56_GPIO56 MFP_CFG(GPIO56, AF0) +#define GPIO57_GPIO57 MFP_CFG(GPIO57, AF0) +#define GPIO58_GPIO58 MFP_CFG(GPIO58, AF0) + +/* Codec*/ +#define GPIO23_GPIO23 MFP_CFG(GPIO23, AF0) + +#define GPIO101_GPIO101 MFP_CFG(GPIO101, AF0) + +/* PMIC */ +#define PMIC_PMIC_INT MFP_CFG(PMIC_INT, AF0) + +#endif /* __ASM_MACH_MFP_MMP2_H */ + diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h index 3b216bf41e7..ded43c455ec 100644 --- a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h +++ b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h @@ -193,7 +193,9 @@ #define GPIO32_CF_nCD1 MFP_CFG(GPIO32, AF3) #define GPIO33_CF_nCD2 MFP_CFG(GPIO33, AF3) -/* UART1 */ +/* UART */ +#define GPIO88_UART2_TXD MFP_CFG(GPIO88, AF2) +#define GPIO89_UART2_RXD MFP_CFG(GPIO89, AF2) #define GPIO107_UART1_TXD MFP_CFG_DRV(GPIO107, AF1, FAST) #define GPIO107_UART1_RXD MFP_CFG_DRV(GPIO107, AF2, FAST) #define GPIO108_UART1_RXD MFP_CFG_DRV(GPIO108, AF1, FAST) diff --git a/arch/arm/mach-mmp/include/mach/mmp2.h b/arch/arm/mach-mmp/include/mach/mmp2.h new file mode 100644 index 00000000000..459f3be9cfb --- /dev/null +++ b/arch/arm/mach-mmp/include/mach/mmp2.h @@ -0,0 +1,60 @@ +#ifndef __ASM_MACH_MMP2_H +#define __ASM_MACH_MMP2_H + +#include <linux/i2c.h> +#include <mach/devices.h> +#include <plat/i2c.h> + +extern struct pxa_device_desc mmp2_device_uart1; +extern struct pxa_device_desc mmp2_device_uart2; +extern struct pxa_device_desc mmp2_device_uart3; +extern struct pxa_device_desc mmp2_device_uart4; +extern struct pxa_device_desc mmp2_device_twsi1; +extern struct pxa_device_desc mmp2_device_twsi2; +extern struct pxa_device_desc mmp2_device_twsi3; +extern struct pxa_device_desc mmp2_device_twsi4; +extern struct pxa_device_desc mmp2_device_twsi5; +extern struct pxa_device_desc mmp2_device_twsi6; + +static inline int mmp2_add_uart(int id) +{ + struct pxa_device_desc *d = NULL; + + switch (id) { + case 1: d = &mmp2_device_uart1; break; + case 2: d = &mmp2_device_uart2; break; + case 3: d = &mmp2_device_uart3; break; + case 4: d = &mmp2_device_uart4; break; + default: + return -EINVAL; + } + + return pxa_register_device(d, NULL, 0); +} + +static inline int mmp2_add_twsi(int id, struct i2c_pxa_platform_data *data, + struct i2c_board_info *info, unsigned size) +{ + struct pxa_device_desc *d = NULL; + int ret; + + switch (id) { + case 0: d = &mmp2_device_twsi1; break; + case 1: d = &mmp2_device_twsi2; break; + case 2: d = &mmp2_device_twsi3; break; + case 3: d = &mmp2_device_twsi4; break; + case 4: d = &mmp2_device_twsi5; break; + case 5: d = &mmp2_device_twsi6; break; + default: + return -EINVAL; + } + + ret = i2c_register_board_info(id, info, size); + if (ret) + return ret; + + return pxa_register_device(d, data, sizeof(*data)); +} + +#endif /* __ASM_MACH_MMP2_H */ + diff --git a/arch/arm/mach-mmp/include/mach/regs-apbc.h b/arch/arm/mach-mmp/include/mach/regs-apbc.h index 98ccbee4bd0..712af03fd1a 100644 --- a/arch/arm/mach-mmp/include/mach/regs-apbc.h +++ b/arch/arm/mach-mmp/include/mach/regs-apbc.h @@ -69,6 +69,47 @@ #define APBC_PXA910_ASFAR APBC_REG(0x050) #define APBC_PXA910_ASSAR APBC_REG(0x054) +/* + * APB Clock register offsets for MMP2 + */ +#define APBC_MMP2_RTC APBC_REG(0x000) +#define APBC_MMP2_TWSI1 APBC_REG(0x004) +#define APBC_MMP2_TWSI2 APBC_REG(0x008) +#define APBC_MMP2_TWSI3 APBC_REG(0x00c) +#define APBC_MMP2_TWSI4 APBC_REG(0x010) +#define APBC_MMP2_ONEWIRE APBC_REG(0x014) +#define APBC_MMP2_KPC APBC_REG(0x018) +#define APBC_MMP2_TB_ROTARY APBC_REG(0x01c) +#define APBC_MMP2_SW_JTAG APBC_REG(0x020) +#define APBC_MMP2_TIMERS APBC_REG(0x024) +#define APBC_MMP2_UART1 APBC_REG(0x02c) +#define APBC_MMP2_UART2 APBC_REG(0x030) +#define APBC_MMP2_UART3 APBC_REG(0x034) +#define APBC_MMP2_GPIO APBC_REG(0x038) +#define APBC_MMP2_PWM0 APBC_REG(0x03c) +#define APBC_MMP2_PWM1 APBC_REG(0x040) +#define APBC_MMP2_PWM2 APBC_REG(0x044) +#define APBC_MMP2_PWM3 APBC_REG(0x048) +#define APBC_MMP2_SSP0 APBC_REG(0x04c) +#define APBC_MMP2_SSP1 APBC_REG(0x050) +#define APBC_MMP2_SSP2 APBC_REG(0x054) +#define APBC_MMP2_SSP3 APBC_REG(0x058) +#define APBC_MMP2_SSP4 APBC_REG(0x05c) +#define APBC_MMP2_SSP5 APBC_REG(0x060) +#define APBC_MMP2_AIB APBC_REG(0x064) +#define APBC_MMP2_ASFAR APBC_REG(0x068) +#define APBC_MMP2_ASSAR APBC_REG(0x06c) +#define APBC_MMP2_USIM APBC_REG(0x070) +#define APBC_MMP2_MPMU APBC_REG(0x074) +#define APBC_MMP2_IPC APBC_REG(0x078) +#define APBC_MMP2_TWSI5 APBC_REG(0x07c) +#define APBC_MMP2_TWSI6 APBC_REG(0x080) +#define APBC_MMP2_TWSI_INTSTS APBC_REG(0x084) +#define APBC_MMP2_UART4 APBC_REG(0x088) +#define APBC_MMP2_RIPC APBC_REG(0x08c) +#define APBC_MMP2_THSENS1 APBC_REG(0x090) /* Thermal Sensor */ +#define APBC_MMP2_THSENS_INTSTS APBC_REG(0x0a4) + /* Common APB clock register bit definitions */ #define APBC_APBCLK (1 << 0) /* APB Bus Clock Enable */ #define APBC_FNCLK (1 << 1) /* Functional Clock Enable */ diff --git a/arch/arm/mach-mmp/include/mach/regs-icu.h b/arch/arm/mach-mmp/include/mach/regs-icu.h index e5f08723e0c..f882d91894b 100644 --- a/arch/arm/mach-mmp/include/mach/regs-icu.h +++ b/arch/arm/mach-mmp/include/mach/regs-icu.h @@ -17,10 +17,12 @@ #define ICU_REG(x) (ICU_VIRT_BASE + (x)) #define ICU_INT_CONF(n) ICU_REG((n) << 2) +#define ICU_INT_CONF_MASK (0xf) + +/************ PXA168/PXA910 (MMP) *********************/ #define ICU_INT_CONF_AP_INT (1 << 6) #define ICU_INT_CONF_CP_INT (1 << 5) #define ICU_INT_CONF_IRQ (1 << 4) -#define ICU_INT_CONF_MASK (0xf) #define ICU_AP_FIQ_SEL_INT_NUM ICU_REG(0x108) /* AP FIQ Selected Interrupt */ #define ICU_AP_IRQ_SEL_INT_NUM ICU_REG(0x10C) /* AP IRQ Selected Interrupt */ @@ -28,4 +30,42 @@ #define ICU_INT_STATUS_0 ICU_REG(0x128) /* Interrupt Stuats 0 */ #define ICU_INT_STATUS_1 ICU_REG(0x12C) /* Interrupt Status 1 */ +/************************** MMP2 ***********************/ + +/* + * IRQ0/FIQ0 is routed to SP IRQ/FIQ. + * IRQ1 is routed to PJ4 IRQ, and IRQ2 is routes to PJ4 FIQ. + */ +#define ICU_INT_ROUTE_SP_IRQ (1 << 4) +#define ICU_INT_ROUTE_PJ4_IRQ (1 << 5) +#define ICU_INT_ROUTE_PJ4_FIQ (1 << 6) + +#define MMP2_ICU_PJ4_IRQ_STATUS0 ICU_REG(0x138) +#define MMP2_ICU_PJ4_IRQ_STATUS1 ICU_REG(0x13c) +#define MMP2_ICU_PJ4_FIQ_STATUS0 ICU_REG(0x140) +#define MMP2_ICU_PJ4_FIQ_STATUS1 ICU_REG(0x144) + +#define MMP2_ICU_INT4_STATUS ICU_REG(0x150) +#define MMP2_ICU_INT5_STATUS ICU_REG(0x154) +#define MMP2_ICU_INT17_STATUS ICU_REG(0x158) +#define MMP2_ICU_INT35_STATUS ICU_REG(0x15c) +#define MMP2_ICU_INT51_STATUS ICU_REG(0x160) + +#define MMP2_ICU_INT4_MASK ICU_REG(0x168) +#define MMP2_ICU_INT5_MASK ICU_REG(0x16C) +#define MMP2_ICU_INT17_MASK ICU_REG(0x170) +#define MMP2_ICU_INT35_MASK ICU_REG(0x174) +#define MMP2_ICU_INT51_MASK ICU_REG(0x178) + +#define MMP2_ICU_SP_IRQ_SEL ICU_REG(0x100) +#define MMP2_ICU_PJ4_IRQ_SEL ICU_REG(0x104) +#define MMP2_ICU_PJ4_FIQ_SEL ICU_REG(0x108) + +#define MMP2_ICU_INVERT ICU_REG(0x164) + +#define MMP2_ICU_INV_PMIC (1 << 0) +#define MMP2_ICU_INV_PERF (1 << 1) +#define MMP2_ICU_INV_COMMTX (1 << 2) +#define MMP2_ICU_INV_COMMRX (1 << 3) + #endif /* __ASM_MACH_ICU_H */ diff --git a/arch/arm/mach-mmp/include/mach/uncompress.h b/arch/arm/mach-mmp/include/mach/uncompress.h index c93d5fa5865..a7dcc530721 100644 --- a/arch/arm/mach-mmp/include/mach/uncompress.h +++ b/arch/arm/mach-mmp/include/mach/uncompress.h @@ -8,15 +8,16 @@ #include <linux/serial_reg.h> #include <mach/addr-map.h> +#include <asm/mach-types.h> #define UART1_BASE (APB_PHYS_BASE + 0x36000) #define UART2_BASE (APB_PHYS_BASE + 0x17000) #define UART3_BASE (APB_PHYS_BASE + 0x18000) +static volatile unsigned long *UART = (unsigned long *)UART2_BASE; + static inline void putc(char c) { - volatile unsigned long *UART = (unsigned long *)UART2_BASE; - /* UART enabled? */ if (!(UART[UART_IER] & UART_IER_UUE)) return; @@ -34,8 +35,14 @@ static inline void flush(void) { } +static inline void arch_decomp_setup(void) +{ + if (machine_is_avengers_lite()) + UART = (unsigned long *)UART3_BASE; +} + /* * nothing to do */ -#define arch_decomp_setup() + #define arch_decomp_wdog() diff --git a/arch/arm/mach-mmp/irq-mmp2.c b/arch/arm/mach-mmp/irq-mmp2.c new file mode 100644 index 00000000000..cb18221c0af --- /dev/null +++ b/arch/arm/mach-mmp/irq-mmp2.c @@ -0,0 +1,154 @@ +/* + * linux/arch/arm/mach-mmp/irq-mmp2.c + * + * Generic IRQ handling, GPIO IRQ demultiplexing, etc. + * + * Author: Haojian Zhuang <haojian.zhuang@marvell.com> + * Copyright: Marvell International Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/io.h> + +#include <mach/regs-icu.h> + +#include "common.h" + +static void icu_mask_irq(unsigned int irq) +{ + uint32_t r = __raw_readl(ICU_INT_CONF(irq)); + + r &= ~ICU_INT_ROUTE_PJ4_IRQ; + __raw_writel(r, ICU_INT_CONF(irq)); +} + +static void icu_unmask_irq(unsigned int irq) +{ + uint32_t r = __raw_readl(ICU_INT_CONF(irq)); + + r |= ICU_INT_ROUTE_PJ4_IRQ; + __raw_writel(r, ICU_INT_CONF(irq)); +} + +static struct irq_chip icu_irq_chip = { + .name = "icu_irq", + .mask = icu_mask_irq, + .mask_ack = icu_mask_irq, + .unmask = icu_unmask_irq, +}; + +static void pmic_irq_ack(unsigned int irq) +{ + if (irq == IRQ_MMP2_PMIC) + mmp2_clear_pmic_int(); +} + +#define SECOND_IRQ_MASK(_name_, irq_base, prefix) \ +static void _name_##_mask_irq(unsigned int irq) \ +{ \ + uint32_t r; \ + r = __raw_readl(prefix##_MASK) | (1 << (irq - irq_base)); \ + __raw_writel(r, prefix##_MASK); \ +} + +#define SECOND_IRQ_UNMASK(_name_, irq_base, prefix) \ +static void _name_##_unmask_irq(unsigned int irq) \ +{ \ + uint32_t r; \ + r = __raw_readl(prefix##_MASK) & ~(1 << (irq - irq_base)); \ + __raw_writel(r, prefix##_MASK); \ +} + +#define SECOND_IRQ_DEMUX(_name_, irq_base, prefix) \ +static void _name_##_irq_demux(unsigned int irq, struct irq_desc *desc) \ +{ \ + unsigned long status, mask, n; \ + mask = __raw_readl(prefix##_MASK); \ + while (1) { \ + status = __raw_readl(prefix##_STATUS) & ~mask; \ + if (status == 0) \ + break; \ + n = find_first_bit(&status, BITS_PER_LONG); \ + while (n < BITS_PER_LONG) { \ + generic_handle_irq(irq_base + n); \ + n = find_next_bit(&status, BITS_PER_LONG, n+1); \ + } \ + } \ +} + +#define SECOND_IRQ_CHIP(_name_, irq_base, prefix) \ +SECOND_IRQ_MASK(_name_, irq_base, prefix) \ +SECOND_IRQ_UNMASK(_name_, irq_base, prefix) \ +SECOND_IRQ_DEMUX(_name_, irq_base, prefix) \ +static struct irq_chip _name_##_irq_chip = { \ + .name = #_name_, \ + .mask = _name_##_mask_irq, \ + .unmask = _name_##_unmask_irq, \ +} + +SECOND_IRQ_CHIP(pmic, IRQ_MMP2_PMIC_BASE, MMP2_ICU_INT4); +SECOND_IRQ_CHIP(rtc, IRQ_MMP2_RTC_BASE, MMP2_ICU_INT5); +SECOND_IRQ_CHIP(twsi, IRQ_MMP2_TWSI_BASE, MMP2_ICU_INT17); +SECOND_IRQ_CHIP(misc, IRQ_MMP2_MISC_BASE, MMP2_ICU_INT35); +SECOND_IRQ_CHIP(ssp, IRQ_MMP2_SSP_BASE, MMP2_ICU_INT51); + +static void init_mux_irq(struct irq_chip *chip, int start, int num) +{ + int irq; + + for (irq = start; num > 0; irq++, num--) { + /* mask and clear the IRQ */ + chip->mask(irq); + if (chip->ack) + chip->ack(irq); + + set_irq_chip(irq, chip); + set_irq_flags(irq, IRQF_VALID); + set_irq_handler(irq, handle_level_irq); + } +} + +void __init mmp2_init_icu(void) +{ + int irq; + + for (irq = 0; irq < IRQ_MMP2_MUX_BASE; irq++) { + icu_mask_irq(irq); + set_irq_chip(irq, &icu_irq_chip); + set_irq_flags(irq, IRQF_VALID); + + switch (irq) { + case IRQ_MMP2_PMIC_MUX: + case IRQ_MMP2_RTC_MUX: + case IRQ_MMP2_TWSI_MUX: + case IRQ_MMP2_MISC_MUX: + case IRQ_MMP2_SSP_MUX: + break; + default: + set_irq_handler(irq, handle_level_irq); + break; + } + } + + /* NOTE: IRQ_MMP2_PMIC requires the PMIC MFPR register + * to be written to clear the interrupt + */ + pmic_irq_chip.ack = pmic_irq_ack; + + init_mux_irq(&pmic_irq_chip, IRQ_MMP2_PMIC_BASE, 2); + init_mux_irq(&rtc_irq_chip, IRQ_MMP2_RTC_BASE, 2); + init_mux_irq(&twsi_irq_chip, IRQ_MMP2_TWSI_BASE, 5); + init_mux_irq(&misc_irq_chip, IRQ_MMP2_MISC_BASE, 15); + init_mux_irq(&ssp_irq_chip, IRQ_MMP2_SSP_BASE, 2); + + set_irq_chained_handler(IRQ_MMP2_PMIC_MUX, pmic_irq_demux); + set_irq_chained_handler(IRQ_MMP2_RTC_MUX, rtc_irq_demux); + set_irq_chained_handler(IRQ_MMP2_TWSI_MUX, twsi_irq_demux); + set_irq_chained_handler(IRQ_MMP2_MISC_MUX, misc_irq_demux); + set_irq_chained_handler(IRQ_MMP2_SSP_MUX, ssp_irq_demux); +} diff --git a/arch/arm/mach-mmp/irq.c b/arch/arm/mach-mmp/irq-pxa168.c index 52ff2f065eb..52ff2f065eb 100644 --- a/arch/arm/mach-mmp/irq.c +++ b/arch/arm/mach-mmp/irq-pxa168.c diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c new file mode 100644 index 00000000000..cfd4d66ef80 --- /dev/null +++ b/arch/arm/mach-mmp/jasper.c @@ -0,0 +1,80 @@ +/* + * linux/arch/arm/mach-mmp/jasper.c + * + * Support for the Marvell Jasper Development Platform. + * + * Copyright (C) 2009-2010 Marvell International Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/gpio.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <mach/addr-map.h> +#include <mach/mfp-mmp2.h> +#include <mach/mmp2.h> + +#include "common.h" + +static unsigned long jasper_pin_config[] __initdata = { + /* UART1 */ + GPIO29_UART1_RXD, + GPIO30_UART1_TXD, + + /* UART3 */ + GPIO51_UART3_RXD, + GPIO52_UART3_TXD, + + /* DFI */ + GPIO168_DFI_D0, + GPIO167_DFI_D1, + GPIO166_DFI_D2, + GPIO165_DFI_D3, + GPIO107_DFI_D4, + GPIO106_DFI_D5, + GPIO105_DFI_D6, + GPIO104_DFI_D7, + GPIO111_DFI_D8, + GPIO164_DFI_D9, + GPIO163_DFI_D10, + GPIO162_DFI_D11, + GPIO161_DFI_D12, + GPIO110_DFI_D13, + GPIO109_DFI_D14, + GPIO108_DFI_D15, + GPIO143_ND_nCS0, + GPIO144_ND_nCS1, + GPIO147_ND_nWE, + GPIO148_ND_nRE, + GPIO150_ND_ALE, + GPIO149_ND_CLE, + GPIO112_ND_RDY0, + GPIO160_ND_RDY1, +}; + +static void __init jasper_init(void) +{ + mfp_config(ARRAY_AND_SIZE(jasper_pin_config)); + + /* on-chip devices */ + mmp2_add_uart(1); + mmp2_add_uart(3); +} + +MACHINE_START(MARVELL_JASPER, "Jasper Development Platform") + .phys_io = APB_PHYS_BASE, + .boot_params = 0x00000100, + .io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc, + .map_io = pxa_map_io, + .init_irq = mmp2_init_irq, + .timer = &mmp2_timer, + .init_machine = jasper_init, +MACHINE_END diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c new file mode 100644 index 00000000000..72eb9daeea9 --- /dev/null +++ b/arch/arm/mach-mmp/mmp2.c @@ -0,0 +1,123 @@ +/* + * linux/arch/arm/mach-mmp/mmp2.c + * + * code name MMP2 + * + * Copyright (C) 2009 Marvell International Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> + +#include <mach/addr-map.h> +#include <mach/regs-apbc.h> +#include <mach/regs-apmu.h> +#include <mach/cputype.h> +#include <mach/irqs.h> +#include <mach/mfp.h> +#include <mach/gpio.h> +#include <mach/devices.h> + +#include "common.h" +#include "clock.h" + +#define MFPR_VIRT_BASE (APB_VIRT_BASE + 0x1e000) + +#define APMASK(i) (GPIO_REGS_VIRT + BANK_OFF(i) + 0x9c) + +static struct mfp_addr_map mmp2_addr_map[] __initdata = { + MFP_ADDR(PMIC_INT, 0x2c4), + + MFP_ADDR_END, +}; + +void mmp2_clear_pmic_int(void) +{ + unsigned long mfpr_pmic, data; + + mfpr_pmic = APB_VIRT_BASE + 0x1e000 + 0x2c4; + data = __raw_readl(mfpr_pmic); + __raw_writel(data | (1 << 6), mfpr_pmic); + __raw_writel(data, mfpr_pmic); +} + +static void __init mmp2_init_gpio(void) +{ + int i; + + /* enable GPIO clock */ + __raw_writel(APBC_APBCLK | APBC_FNCLK, APBC_MMP2_GPIO); + + /* unmask GPIO edge detection for all 6 banks -- APMASKx */ + for (i = 0; i < 6; i++) + __raw_writel(0xffffffff, APMASK(i)); + + pxa_init_gpio(IRQ_MMP2_GPIO, 0, 167, NULL); +} + +void __init mmp2_init_irq(void) +{ + mmp2_init_icu(); + mmp2_init_gpio(); +} + +/* APB peripheral clocks */ +static APBC_CLK(uart1, MMP2_UART1, 1, 26000000); +static APBC_CLK(uart2, MMP2_UART2, 1, 26000000); +static APBC_CLK(uart3, MMP2_UART3, 1, 26000000); +static APBC_CLK(uart4, MMP2_UART4, 1, 26000000); +static APBC_CLK(twsi1, MMP2_TWSI1, 0, 26000000); +static APBC_CLK(twsi2, MMP2_TWSI2, 0, 26000000); +static APBC_CLK(twsi3, MMP2_TWSI3, 0, 26000000); +static APBC_CLK(twsi4, MMP2_TWSI4, 0, 26000000); +static APBC_CLK(twsi5, MMP2_TWSI5, 0, 26000000); +static APBC_CLK(twsi6, MMP2_TWSI6, 0, 26000000); +static APBC_CLK(rtc, MMP2_RTC, 0, 32768); + +static APMU_CLK(nand, NAND, 0xbf, 100000000); + +static struct clk_lookup mmp2_clkregs[] = { + INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL), + INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL), + INIT_CLKREG(&clk_uart3, "pxa2xx-uart.2", NULL), + INIT_CLKREG(&clk_uart4, "pxa2xx-uart.3", NULL), + INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.0", NULL), + INIT_CLKREG(&clk_twsi2, "pxa2xx-i2c.1", NULL), + INIT_CLKREG(&clk_twsi3, "pxa2xx-i2c.2", NULL), + INIT_CLKREG(&clk_twsi4, "pxa2xx-i2c.3", NULL), + INIT_CLKREG(&clk_twsi5, "pxa2xx-i2c.4", NULL), + INIT_CLKREG(&clk_twsi6, "pxa2xx-i2c.5", NULL), + INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL), +}; + +static int __init mmp2_init(void) +{ + if (cpu_is_mmp2()) { + mfp_init_base(MFPR_VIRT_BASE); + mfp_init_addr(mmp2_addr_map); + clks_register(ARRAY_AND_SIZE(mmp2_clkregs)); + } + + return 0; +} +postcore_initcall(mmp2_init); + +/* on-chip devices */ +MMP2_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4030000, 0x30, 4, 5); +MMP2_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4017000, 0x30, 20, 21); +MMP2_DEVICE(uart3, "pxa2xx-uart", 2, UART3, 0xd4018000, 0x30, 22, 23); +MMP2_DEVICE(uart4, "pxa2xx-uart", 3, UART4, 0xd4016000, 0x30, 18, 19); +MMP2_DEVICE(twsi1, "pxa2xx-i2c", 0, TWSI1, 0xd4011000, 0x70); +MMP2_DEVICE(twsi2, "pxa2xx-i2c", 1, TWSI2, 0xd4031000, 0x70); +MMP2_DEVICE(twsi3, "pxa2xx-i2c", 2, TWSI3, 0xd4032000, 0x70); +MMP2_DEVICE(twsi4, "pxa2xx-i2c", 3, TWSI4, 0xd4033000, 0x70); +MMP2_DEVICE(twsi5, "pxa2xx-i2c", 4, TWSI5, 0xd4033800, 0x70); +MMP2_DEVICE(twsi6, "pxa2xx-i2c", 5, TWSI6, 0xd4034000, 0x70); +MMP2_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x100, 28, 29); + diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c index a8400bb891e..cf75694e968 100644 --- a/arch/arm/mach-mmp/time.c +++ b/arch/arm/mach-mmp/time.c @@ -30,7 +30,10 @@ #include <mach/addr-map.h> #include <mach/regs-timers.h> +#include <mach/regs-apbc.h> #include <mach/irqs.h> +#include <mach/cputype.h> +#include <asm/mach/time.h> #include "clock.h" @@ -158,7 +161,7 @@ static void __init timer_config(void) __raw_writel(cer & ~0x1, TIMERS_VIRT_BASE + TMR_CER); /* disable */ - ccr &= TMR_CCR_CS_0(0x3); + ccr &= (cpu_is_mmp2()) ? TMR_CCR_CS_0(0) : TMR_CCR_CS_0(3); __raw_writel(ccr, TIMERS_VIRT_BASE + TMR_CCR); /* free-running mode */ @@ -197,3 +200,24 @@ void __init timer_init(int irq) clocksource_register(&cksrc); clockevents_register_device(&ckevt); } + +static void __init mmp2_timer_init(void) +{ + unsigned long clk_rst; + + __raw_writel(APBC_APBCLK | APBC_RST, APBC_MMP2_TIMERS); + + /* + * enable bus/functional clock, enable 6.5MHz (divider 4), + * release reset + */ + clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1); + __raw_writel(clk_rst, APBC_MMP2_TIMERS); + + timer_init(IRQ_MMP2_TIMER1); +} + +struct sys_timer mmp2_timer = { + .init = mmp2_timer_init, +}; + diff --git a/arch/arm/mach-mv78xx0/Kconfig b/arch/arm/mach-mv78xx0/Kconfig index 6fbe68fe441..f2d309d0619 100644 --- a/arch/arm/mach-mv78xx0/Kconfig +++ b/arch/arm/mach-mv78xx0/Kconfig @@ -14,6 +14,12 @@ config MACH_RD78X00_MASA Say 'Y' here if you want your kernel to support the Marvell RD-78x00-mASA Reference Design. +config MACH_TERASTATION_WXL + bool "Buffalo WLX (Terastation Duo) NAS" + help + Say 'Y' here if you want your kernel to support the + Buffalo WXL Nas. + endmenu endif diff --git a/arch/arm/mach-mv78xx0/Makefile b/arch/arm/mach-mv78xx0/Makefile index da628b7f3bb..67a13f9bfe6 100644 --- a/arch/arm/mach-mv78xx0/Makefile +++ b/arch/arm/mach-mv78xx0/Makefile @@ -1,3 +1,4 @@ -obj-y += common.o addr-map.o irq.o pcie.o +obj-y += common.o addr-map.o mpp.o irq.o pcie.o obj-$(CONFIG_MACH_DB78X00_BP) += db78x00-bp-setup.o obj-$(CONFIG_MACH_RD78X00_MASA) += rd78x00-masa-setup.o +obj-$(CONFIG_MACH_TERASTATION_WXL) += buffalo-wxl-setup.o diff --git a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c new file mode 100644 index 00000000000..61e5e583603 --- /dev/null +++ b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c @@ -0,0 +1,155 @@ +/* + * arch/arm/mach-mv78xx0/buffalo-wxl-setup.c + * + * Buffalo WXL (Terastation Duo) Setup routines + * + * sebastien requiem <sebastien@requiem.fr> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/ata_platform.h> +#include <linux/mv643xx_eth.h> +#include <linux/ethtool.h> +#include <linux/i2c.h> +#include <mach/mv78xx0.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include "common.h" +#include "mpp.h" + + +/* This arch has 2 Giga Ethernet */ + +static struct mv643xx_eth_platform_data db78x00_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static struct mv643xx_eth_platform_data db78x00_ge01_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(8), +}; + + +/* 2 SATA controller supporting HotPlug */ + +static struct mv_sata_platform_data db78x00_sata_data = { + .n_ports = 2, +}; + +static struct i2c_board_info __initdata db78x00_i2c_rtc = { + I2C_BOARD_INFO("ds1338", 0x68), +}; + + +static unsigned int wxl_mpp_config[] __initdata = { + MPP0_GE1_TXCLK, + MPP1_GE1_TXCTL, + MPP2_GE1_RXCTL, + MPP3_GE1_RXCLK, + MPP4_GE1_TXD0, + MPP5_GE1_TXD1, + MPP6_GE1_TXD2, + MPP7_GE1_TXD3, + MPP8_GE1_RXD0, + MPP9_GE1_RXD1, + MPP10_GE1_RXD2, + MPP11_GE1_RXD3, + MPP12_GPIO, + MPP13_SYSRST_OUTn, + MPP14_SATA1_ACTn, + MPP15_SATA0_ACTn, + MPP16_GPIO, + MPP17_GPIO, + MPP18_GPIO, + MPP19_GPIO, + MPP20_GPIO, + MPP21_GPIO, + MPP22_GPIO, + MPP23_GPIO, + MPP24_UA2_TXD, + MPP25_UA2_RXD, + MPP26_UA2_CTSn, + MPP27_UA2_RTSn, + MPP28_GPIO, + MPP29_SYSRST_OUTn, + MPP30_GPIO, + MPP31_GPIO, + MPP32_GPIO, + MPP33_GPIO, + MPP34_GPIO, + MPP35_GPIO, + MPP36_GPIO, + MPP37_GPIO, + MPP38_GPIO, + MPP39_GPIO, + MPP40_UNUSED, + MPP41_UNUSED, + MPP42_UNUSED, + MPP43_UNUSED, + MPP44_UNUSED, + MPP45_UNUSED, + MPP46_UNUSED, + MPP47_UNUSED, + MPP48_SATA1_ACTn, + MPP49_SATA0_ACTn, + 0 +}; + + +static void __init wxl_init(void) +{ + /* + * Basic MV78xx0 setup. Needs to be called early. + */ + mv78xx0_init(); + mv78xx0_mpp_conf(wxl_mpp_config); + + /* + * Partition on-chip peripherals between the two CPU cores. + */ + mv78xx0_ehci0_init(); + mv78xx0_ehci1_init(); + mv78xx0_ehci2_init(); + mv78xx0_ge00_init(&db78x00_ge00_data); + mv78xx0_ge01_init(&db78x00_ge01_data); + mv78xx0_sata_init(&db78x00_sata_data); + mv78xx0_uart0_init(); + mv78xx0_uart1_init(); + mv78xx0_uart2_init(); + mv78xx0_uart3_init(); + mv78xx0_i2c_init(); + i2c_register_board_info(0, &db78x00_i2c_rtc, 1); +} + +static int __init wxl_pci_init(void) +{ + if (machine_is_terastation_wxl()) { + /* + * Assign the x16 PCIe slot on the board to CPU core + * #0, and let CPU core #1 have the four x1 slots. + */ + if (mv78xx0_core_index() == 0) + mv78xx0_pcie_init(0, 1); + else + mv78xx0_pcie_init(1, 0); + } + + return 0; +} +subsys_initcall(wxl_pci_init); + +MACHINE_START(TERASTATION_WXL, "Buffalo Nas WXL") + /* Maintainer: Sebastien Requiem <sebastien@requiem.fr> */ + .phys_io = MV78XX0_REGS_PHYS_BASE, + .io_pg_offst = ((MV78XX0_REGS_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .init_machine = wxl_init, + .map_io = mv78xx0_map_io, + .init_irq = mv78xx0_init_irq, + .timer = &mv78xx0_timer, +MACHINE_END diff --git a/arch/arm/mach-mv78xx0/mpp.c b/arch/arm/mach-mv78xx0/mpp.c new file mode 100644 index 00000000000..354ac514eb8 --- /dev/null +++ b/arch/arm/mach-mv78xx0/mpp.c @@ -0,0 +1,96 @@ +/* + * arch/arm/mach-mv78x00/mpp.c + * + * MPP functions for Marvell MV78x00 SoCs + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mbus.h> +#include <linux/io.h> +#include <asm/gpio.h> +#include <mach/hardware.h> +#include "common.h" +#include "mpp.h" + +static unsigned int __init mv78xx0_variant(void) +{ + u32 dev, rev; + + mv78xx0_pcie_id(&dev, &rev); + + if (dev == MV78100_DEV_ID && rev >= MV78100_REV_A0) + return MPP_78100_A0_MASK; + + printk(KERN_ERR "MPP setup: unknown mv78x00 variant " + "(dev %#x rev %#x)\n", dev, rev); + return 0; +} + +#define MPP_CTRL(i) (DEV_BUS_VIRT_BASE + (i) * 4) +#define MPP_NR_REGS (1 + MPP_MAX/8) + +void __init mv78xx0_mpp_conf(unsigned int *mpp_list) +{ + u32 mpp_ctrl[MPP_NR_REGS]; + unsigned int variant_mask; + int i; + + variant_mask = mv78xx0_variant(); + if (!variant_mask) + return; + + /* Initialize gpiolib. */ + orion_gpio_init(); + + printk(KERN_DEBUG "initial MPP regs:"); + for (i = 0; i < MPP_NR_REGS; i++) { + mpp_ctrl[i] = readl(MPP_CTRL(i)); + printk(" %08x", mpp_ctrl[i]); + } + printk("\n"); + + while (*mpp_list) { + unsigned int num = MPP_NUM(*mpp_list); + unsigned int sel = MPP_SEL(*mpp_list); + int shift, gpio_mode; + + if (num > MPP_MAX) { + printk(KERN_ERR "mv78xx0_mpp_conf: invalid MPP " + "number (%u)\n", num); + continue; + } + if (!(*mpp_list & variant_mask)) { + printk(KERN_WARNING + "mv78xx0_mpp_conf: requested MPP%u config " + "unavailable on this hardware\n", num); + continue; + } + + shift = (num & 7) << 2; + mpp_ctrl[num / 8] &= ~(0xf << shift); + mpp_ctrl[num / 8] |= sel << shift; + + gpio_mode = 0; + if (*mpp_list & MPP_INPUT_MASK) + gpio_mode |= GPIO_INPUT_OK; + if (*mpp_list & MPP_OUTPUT_MASK) + gpio_mode |= GPIO_OUTPUT_OK; + if (sel != 0) + gpio_mode = 0; + orion_gpio_set_valid(num, gpio_mode); + + mpp_list++; + } + + printk(KERN_DEBUG " final MPP regs:"); + for (i = 0; i < MPP_NR_REGS; i++) { + writel(mpp_ctrl[i], MPP_CTRL(i)); + printk(" %08x", mpp_ctrl[i]); + } + printk("\n"); +} diff --git a/arch/arm/mach-mv78xx0/mpp.h b/arch/arm/mach-mv78xx0/mpp.h new file mode 100644 index 00000000000..80840b781ea --- /dev/null +++ b/arch/arm/mach-mv78xx0/mpp.h @@ -0,0 +1,347 @@ +/* + * linux/arch/arm/mach-mv78xx0/mpp.h -- Multi Purpose Pins + * + * + * sebastien requiem <sebastien@requiem.fr> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MV78X00_MPP_H +#define __MV78X00_MPP_H + +#define MPP(_num, _sel, _in, _out, _78100_A0) (\ + /* MPP number */ ((_num) & 0xff) | \ + /* MPP select value */ (((_sel) & 0xf) << 8) | \ + /* may be input signal */ ((!!(_in)) << 12) | \ + /* may be output signal */ ((!!(_out)) << 13) | \ + /* available on A0 */ ((!!(_78100_A0)) << 14)) + +#define MPP_NUM(x) ((x) & 0xff) +#define MPP_SEL(x) (((x) >> 8) & 0xf) + + /* num sel i o 78100_A0 */ + +#define MPP_INPUT_MASK MPP(0, 0x0, 1, 0, 0) +#define MPP_OUTPUT_MASK MPP(0, 0x0, 0, 1, 0) + +#define MPP_78100_A0_MASK MPP(0, 0x0, 0, 0, 1) + +#define MPP0_GPIO MPP(0, 0x0, 1, 1, 1) +#define MPP0_GE0_COL MPP(0, 0x1, 1, 0, 1) +#define MPP0_GE1_TXCLK MPP(0, 0x2, 0, 1, 1) +#define MPP0_UNUSED MPP(0, 0x3, 0, 0, 1) + +#define MPP1_GPIO MPP(1, 0x0, 1, 1, 1) +#define MPP1_GE0_RXERR MPP(1, 0x1, 1, 0, 1) +#define MPP1_GE1_TXCTL MPP(1, 0x2, 0, 1, 1) +#define MPP1_UNUSED MPP(1, 0x3, 0, 0, 1) + +#define MPP2_GPIO MPP(2, 0x0, 1, 1, 1) +#define MPP2_GE0_CRS MPP(2, 0x1, 1, 0, 1) +#define MPP2_GE1_RXCTL MPP(2, 0x2, 1, 0, 1) +#define MPP2_UNUSED MPP(2, 0x3, 0, 0, 1) + +#define MPP3_GPIO MPP(3, 0x0, 1, 1, 1) +#define MPP3_GE0_TXERR MPP(3, 0x1, 0, 1, 1) +#define MPP3_GE1_RXCLK MPP(3, 0x2, 1, 0, 1) +#define MPP3_UNUSED MPP(3, 0x3, 0, 0, 1) + +#define MPP4_GPIO MPP(4, 0x0, 1, 1, 1) +#define MPP4_GE0_TXD4 MPP(4, 0x1, 0, 1, 1) +#define MPP4_GE1_TXD0 MPP(4, 0x2, 0, 1, 1) +#define MPP4_UNUSED MPP(4, 0x3, 0, 0, 1) + +#define MPP5_GPIO MPP(5, 0x0, 1, 1, 1) +#define MPP5_GE0_TXD5 MPP(5, 0x1, 0, 1, 1) +#define MPP5_GE1_TXD1 MPP(5, 0x2, 0, 1, 1) +#define MPP5_UNUSED MPP(5, 0x3, 0, 0, 1) + +#define MPP6_GPIO MPP(6, 0x0, 1, 1, 1) +#define MPP6_GE0_TXD6 MPP(6, 0x1, 0, 1, 1) +#define MPP6_GE1_TXD2 MPP(6, 0x2, 0, 1, 1) +#define MPP6_UNUSED MPP(6, 0x3, 0, 0, 1) + +#define MPP7_GPIO MPP(7, 0x0, 1, 1, 1) +#define MPP7_GE0_TXD7 MPP(7, 0x1, 0, 1, 1) +#define MPP7_GE1_TXD3 MPP(7, 0x2, 0, 1, 1) +#define MPP7_UNUSED MPP(7, 0x3, 0, 0, 1) + +#define MPP8_GPIO MPP(8, 0x0, 1, 1, 1) +#define MPP8_GE0_RXD4 MPP(8, 0x1, 1, 0, 1) +#define MPP8_GE1_RXD0 MPP(8, 0x2, 1, 0, 1) +#define MPP8_UNUSED MPP(8, 0x3, 0, 0, 1) + +#define MPP9_GPIO MPP(9, 0x0, 1, 1, 1) +#define MPP9_GE0_RXD5 MPP(9, 0x1, 1, 0, 1) +#define MPP9_GE1_RXD1 MPP(9, 0x2, 1, 0, 1) +#define MPP9_UNUSED MPP(9, 0x3, 0, 0, 1) + +#define MPP10_GPIO MPP(10, 0x0, 1, 1, 1) +#define MPP10_GE0_RXD6 MPP(10, 0x1, 1, 0, 1) +#define MPP10_GE1_RXD2 MPP(10, 0x2, 1, 0, 1) +#define MPP10_UNUSED MPP(10, 0x3, 0, 0, 1) + +#define MPP11_GPIO MPP(11, 0x0, 1, 1, 1) +#define MPP11_GE0_RXD7 MPP(11, 0x1, 1, 0, 1) +#define MPP11_GE1_RXD3 MPP(11, 0x2, 1, 0, 1) +#define MPP11_UNUSED MPP(11, 0x3, 0, 0, 1) + +#define MPP12_GPIO MPP(12, 0x0, 1, 1, 1) +#define MPP12_M_BB MPP(12, 0x3, 1, 0, 1) +#define MPP12_UA0_CTSn MPP(12, 0x4, 1, 0, 1) +#define MPP12_NAND_FLASH_REn0 MPP(12, 0x5, 0, 1, 1) +#define MPP12_TDM0_SCSn MPP(12, 0X6, 0, 1, 1) +#define MPP12_UNUSED MPP(12, 0x1, 0, 0, 1) + +#define MPP13_GPIO MPP(13, 0x0, 1, 1, 1) +#define MPP13_SYSRST_OUTn MPP(13, 0x3, 0, 1, 1) +#define MPP13_UA0_RTSn MPP(13, 0x4, 0, 1, 1) +#define MPP13_NAN_FLASH_WEn0 MPP(13, 0x5, 0, 1, 1) +#define MPP13_TDM_SCLK MPP(13, 0x6, 0, 1, 1) +#define MPP13_UNUSED MPP(13, 0x1, 0, 0, 1) + +#define MPP14_GPIO MPP(14, 0x0, 1, 1, 1) +#define MPP14_SATA1_ACTn MPP(14, 0x3, 0, 1, 1) +#define MPP14_UA1_CTSn MPP(14, 0x4, 1, 0, 1) +#define MPP14_NAND_FLASH_REn1 MPP(14, 0x5, 0, 1, 1) +#define MPP14_TDM_SMOSI MPP(14, 0x6, 0, 1, 1) +#define MPP14_UNUSED MPP(14, 0x1, 0, 0, 1) + +#define MPP15_GPIO MPP(15, 0x0, 1, 1, 1) +#define MPP15_SATA0_ACTn MPP(15, 0x3, 0, 1, 1) +#define MPP15_UA1_RTSn MPP(15, 0x4, 0, 1, 1) +#define MPP15_NAND_FLASH_WEn1 MPP(15, 0x5, 0, 1, 1) +#define MPP15_TDM_SMISO MPP(15, 0x6, 1, 0, 1) +#define MPP15_UNUSED MPP(15, 0x1, 0, 0, 1) + +#define MPP16_GPIO MPP(16, 0x0, 1, 1, 1) +#define MPP16_SATA1_PRESENTn MPP(16, 0x3, 0, 1, 1) +#define MPP16_UA2_TXD MPP(16, 0x4, 0, 1, 1) +#define MPP16_NAND_FLASH_REn3 MPP(16, 0x5, 0, 1, 1) +#define MPP16_TDM_INTn MPP(16, 0x6, 1, 0, 1) +#define MPP16_UNUSED MPP(16, 0x1, 0, 0, 1) + + +#define MPP17_GPIO MPP(17, 0x0, 1, 1, 1) +#define MPP17_SATA0_PRESENTn MPP(17, 0x3, 0, 1, 1) +#define MPP17_UA2_RXD MPP(17, 0x4, 1, 0, 1) +#define MPP17_NAND_FLASH_WEn3 MPP(17, 0x5, 0, 1, 1) +#define MPP17_TDM_RSTn MPP(17, 0x6, 0, 1, 1) +#define MPP17_UNUSED MPP(17, 0x1, 0, 0, 1) + + +#define MPP18_GPIO MPP(18, 0x0, 1, 1, 1) +#define MPP18_UA0_CTSn MPP(18, 0x4, 1, 0, 1) +#define MPP18_BOOT_FLASH_REn MPP(18, 0x5, 0, 1, 1) +#define MPP18_UNUSED MPP(18, 0x1, 0, 0, 1) + + + +#define MPP19_GPIO MPP(19, 0x0, 1, 1, 1) +#define MPP19_UA0_CTSn MPP(19, 0x4, 0, 1, 1) +#define MPP19_BOOT_FLASH_WEn MPP(19, 0x5, 0, 1, 1) +#define MPP19_UNUSED MPP(19, 0x1, 0, 0, 1) + + +#define MPP20_GPIO MPP(20, 0x0, 1, 1, 1) +#define MPP20_UA1_CTSs MPP(20, 0x4, 1, 0, 1) +#define MPP20_TDM_PCLK MPP(20, 0x6, 1, 1, 0) +#define MPP20_UNUSED MPP(20, 0x1, 0, 0, 1) + + + +#define MPP21_GPIO MPP(21, 0x0, 1, 1, 1) +#define MPP21_UA1_CTSs MPP(21, 0x4, 0, 1, 1) +#define MPP21_TDM_FSYNC MPP(21, 0x6, 1, 1, 0) +#define MPP21_UNUSED MPP(21, 0x1, 0, 0, 1) + + + +#define MPP22_GPIO MPP(22, 0x0, 1, 1, 1) +#define MPP22_UA3_TDX MPP(22, 0x4, 0, 1, 1) +#define MPP22_NAND_FLASH_REn2 MPP(22, 0x5, 0, 1, 1) +#define MPP22_TDM_DRX MPP(22, 0x6, 1, 0, 1) +#define MPP22_UNUSED MPP(22, 0x1, 0, 0, 1) + + + +#define MPP23_GPIO MPP(23, 0x0, 1, 1, 1) +#define MPP23_UA3_RDX MPP(23, 0x4, 1, 0, 1) +#define MPP23_NAND_FLASH_WEn2 MPP(23, 0x5, 0, 1, 1) +#define MPP23_TDM_DTX MPP(23, 0x6, 0, 1, 1) +#define MPP23_UNUSED MPP(23, 0x1, 0, 0, 1) + + +#define MPP24_GPIO MPP(24, 0x0, 1, 1, 1) +#define MPP24_UA2_TXD MPP(24, 0x4, 0, 1, 1) +#define MPP24_TDM_INTn MPP(24, 0x6, 1, 0, 1) +#define MPP24_UNUSED MPP(24, 0x1, 0, 0, 1) + + +#define MPP25_GPIO MPP(25, 0x0, 1, 1, 1) +#define MPP25_UA2_RXD MPP(25, 0x4, 1, 0, 1) +#define MPP25_TDM_RSTn MPP(25, 0x6, 0, 1, 1) +#define MPP25_UNUSED MPP(25, 0x1, 0, 0, 1) + + +#define MPP26_GPIO MPP(26, 0x0, 1, 1, 1) +#define MPP26_UA2_CTSn MPP(26, 0x4, 1, 0, 1) +#define MPP26_TDM_PCLK MPP(26, 0x6, 1, 1, 1) +#define MPP26_UNUSED MPP(26, 0x1, 0, 0, 1) + + +#define MPP27_GPIO MPP(27, 0x0, 1, 1, 1) +#define MPP27_UA2_RTSn MPP(27, 0x4, 0, 1, 1) +#define MPP27_TDM_FSYNC MPP(27, 0x6, 1, 1, 1) +#define MPP27_UNUSED MPP(27, 0x1, 0, 0, 1) + + +#define MPP28_GPIO MPP(28, 0x0, 1, 1, 1) +#define MPP28_UA3_TXD MPP(28, 0x4, 0, 1, 1) +#define MPP28_TDM_DRX MPP(28, 0x6, 1, 0, 1) +#define MPP28_UNUSED MPP(28, 0x1, 0, 0, 1) + +#define MPP29_GPIO MPP(29, 0x0, 1, 1, 1) +#define MPP29_UA3_RXD MPP(29, 0x4, 1, 0, 1) +#define MPP29_SYSRST_OUTn MPP(29, 0x5, 0, 1, 1) +#define MPP29_TDM_DTX MPP(29, 0x6, 0, 1, 1) +#define MPP29_UNUSED MPP(29, 0x1, 0, 0, 1) + +#define MPP30_GPIO MPP(30, 0x0, 1, 1, 1) +#define MPP30_UA3_CTSn MPP(30, 0x4, 1, 0, 1) +#define MPP30_UNUSED MPP(30, 0x1, 0, 0, 1) + +#define MPP31_GPIO MPP(31, 0x0, 1, 1, 1) +#define MPP31_UA3_RTSn MPP(31, 0x4, 0, 1, 1) +#define MPP31_TDM1_SCSn MPP(31, 0x6, 0, 1, 1) +#define MPP31_UNUSED MPP(31, 0x1, 0, 0, 1) + + +#define MPP32_GPIO MPP(32, 0x1, 1, 1, 1) +#define MPP32_UA3_TDX MPP(32, 0x4, 0, 1, 1) +#define MPP32_SYSRST_OUTn MPP(32, 0x5, 0, 1, 1) +#define MPP32_TDM0_RXQ MPP(32, 0x6, 0, 1, 1) +#define MPP32_UNUSED MPP(32, 0x3, 0, 0, 1) + + +#define MPP33_GPIO MPP(33, 0x1, 1, 1, 1) +#define MPP33_UA3_RDX MPP(33, 0x4, 1, 0, 1) +#define MPP33_TDM0_TXQ MPP(33, 0x6, 0, 1, 1) +#define MPP33_UNUSED MPP(33, 0x3, 0, 0, 1) + + + +#define MPP34_GPIO MPP(34, 0x1, 1, 1, 1) +#define MPP34_UA2_TDX MPP(34, 0x4, 0, 1, 1) +#define MPP34_TDM1_RXQ MPP(34, 0x6, 0, 1, 1) +#define MPP34_UNUSED MPP(34, 0x3, 0, 0, 1) + + + +#define MPP35_GPIO MPP(35, 0x1, 1, 1, 1) +#define MPP35_UA2_RDX MPP(35, 0x4, 1, 0, 1) +#define MPP35_TDM1_TXQ MPP(35, 0x6, 0, 1, 1) +#define MPP35_UNUSED MPP(35, 0x3, 0, 0, 1) + +#define MPP36_GPIO MPP(36, 0x1, 1, 1, 1) +#define MPP36_UA0_CTSn MPP(36, 0x2, 1, 0, 1) +#define MPP36_UA2_TDX MPP(36, 0x4, 0, 1, 1) +#define MPP36_TDM0_SCSn MPP(36, 0x6, 0, 1, 1) +#define MPP36_UNUSED MPP(36, 0x3, 0, 0, 1) + + +#define MPP37_GPIO MPP(37, 0x1, 1, 1, 1) +#define MPP37_UA0_RTSn MPP(37, 0x2, 0, 1, 1) +#define MPP37_UA2_RXD MPP(37, 0x4, 1, 0, 1) +#define MPP37_SYSRST_OUTn MPP(37, 0x5, 0, 1, 1) +#define MPP37_TDM_SCLK MPP(37, 0x6, 0, 1, 1) +#define MPP37_UNUSED MPP(37, 0x3, 0, 0, 1) + + + + +#define MPP38_GPIO MPP(38, 0x1, 1, 1, 1) +#define MPP38_UA1_CTSn MPP(38, 0x2, 1, 0, 1) +#define MPP38_UA3_TXD MPP(38, 0x4, 0, 1, 1) +#define MPP38_SYSRST_OUTn MPP(38, 0x5, 0, 1, 1) +#define MPP38_TDM_SMOSI MPP(38, 0x6, 0, 1, 1) +#define MPP38_UNUSED MPP(38, 0x3, 0, 0, 1) + + + + +#define MPP39_GPIO MPP(39, 0x1, 1, 1, 1) +#define MPP39_UA1_RTSn MPP(39, 0x2, 0, 1, 1) +#define MPP39_UA3_RXD MPP(39, 0x4, 1, 0, 1) +#define MPP39_SYSRST_OUTn MPP(39, 0x5, 0, 1, 1) +#define MPP39_TDM_SMISO MPP(39, 0x6, 1, 0, 1) +#define MPP39_UNUSED MPP(39, 0x3, 0, 0, 1) + + + +#define MPP40_GPIO MPP(40, 0x1, 1, 1, 1) +#define MPP40_TDM_INTn MPP(40, 0x6, 1, 0, 1) +#define MPP40_UNUSED MPP(40, 0x0, 0, 0, 1) + + + +#define MPP41_GPIO MPP(41, 0x1, 1, 1, 1) +#define MPP41_TDM_RSTn MPP(41, 0x6, 0, 1, 1) +#define MPP41_UNUSED MPP(41, 0x0, 0, 0, 1) + + + +#define MPP42_GPIO MPP(42, 0x1, 1, 1, 1) +#define MPP42_TDM_PCLK MPP(42, 0x6, 1, 1, 1) +#define MPP42_UNUSED MPP(42, 0x0, 0, 0, 1) + + + +#define MPP43_GPIO MPP(43, 0x1, 1, 1, 1) +#define MPP43_TDM_FSYNC MPP(43, 0x6, 1, 1, 1) +#define MPP43_UNUSED MPP(43, 0x0, 0, 0, 1) + + + +#define MPP44_GPIO MPP(44, 0x1, 1, 1, 1) +#define MPP44_TDM_DRX MPP(44, 0x6, 1, 0, 1) +#define MPP44_UNUSED MPP(44, 0x0, 0, 0, 1) + + + +#define MPP45_GPIO MPP(45, 0x1, 1, 1, 1) +#define MPP45_SATA0_ACTn MPP(45, 0x3, 0, 1, 1) +#define MPP45_TDM_DRX MPP(45, 0x6, 0, 1, 1) +#define MPP45_UNUSED MPP(45, 0x0, 0, 0, 1) + + +#define MPP46_GPIO MPP(46, 0x1, 1, 1, 1) +#define MPP46_TDM_SCSn MPP(46, 0x6, 0, 1, 1) +#define MPP46_UNUSED MPP(46, 0x0, 0, 0, 1) + + +#define MPP47_GPIO MPP(47, 0x1, 1, 1, 1) +#define MPP47_UNUSED MPP(47, 0x0, 0, 0, 1) + + + +#define MPP48_GPIO MPP(48, 0x1, 1, 1, 1) +#define MPP48_SATA1_ACTn MPP(48, 0x3, 0, 1, 1) +#define MPP48_UNUSED MPP(48, 0x2, 0, 0, 1) + + + +#define MPP49_GPIO MPP(49, 0x1, 1, 1, 1) +#define MPP49_SATA0_ACTn MPP(49, 0x3, 0, 1, 1) +#define MPP49_M_BB MPP(49, 0x4, 1, 0, 1) +#define MPP49_UNUSED MPP(49, 0x2, 0, 0, 1) + + +#define MPP_MAX 49 + +void mv78xx0_mpp_conf(unsigned int *mpp_list); + +#endif diff --git a/arch/arm/mach-mx1/Makefile b/arch/arm/mach-mx1/Makefile index 7f86fe073ec..fc2ddf82441 100644 --- a/arch/arm/mach-mx1/Makefile +++ b/arch/arm/mach-mx1/Makefile @@ -4,11 +4,12 @@ # Object file lists. +EXTRA_CFLAGS += -DIMX_NEEDS_DEPRECATED_SYMBOLS obj-y += generic.o clock.o devices.o # Support for CMOS sensor interface obj-$(CONFIG_MX1_VIDEO) += ksym_mx1.o mx1_camera_fiq.o # Specific board support -obj-$(CONFIG_ARCH_MX1ADS) += mx1ads.o -obj-$(CONFIG_MACH_SCB9328) += scb9328.o
\ No newline at end of file +obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o +obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mach-mx1ads.c index 30f04e56faf..51f3cfd83db 100644 --- a/arch/arm/mach-mx1/mx1ads.c +++ b/arch/arm/mach-mx1/mach-mx1ads.c @@ -1,5 +1,5 @@ /* - * arch/arm/mach-imx/mx1ads.c + * arch/arm/mach-imx/mach-mx1ads.c * * Initially based on: * linux-2.6.7-imx/arch/arm/mach-imx/scb9328.c @@ -27,7 +27,7 @@ #include <mach/hardware.h> #include <mach/i2c.h> #include <mach/imx-uart.h> -#include <mach/iomux.h> +#include <mach/iomux-mx1.h> #include <mach/irqs.h> #include "devices.h" @@ -147,7 +147,7 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS") /* Maintainer: Sascha Hauer, Pengutronix */ .phys_io = IMX_IO_PHYS, .io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x100, + .boot_params = MX1_PHYS_OFFSET + 0x100, .map_io = mx1_map_io, .init_irq = mx1_init_irq, .timer = &mx1ads_timer, @@ -157,7 +157,7 @@ MACHINE_END MACHINE_START(MXLADS, "Freescale MXLADS") .phys_io = IMX_IO_PHYS, .io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x100, + .boot_params = MX1_PHYS_OFFSET + 0x100, .map_io = mx1_map_io, .init_irq = mx1_init_irq, .timer = &mx1ads_timer, diff --git a/arch/arm/mach-mx1/scb9328.c b/arch/arm/mach-mx1/mach-scb9328.c index 325d98df605..7587a7a1246 100644 --- a/arch/arm/mach-mx1/scb9328.c +++ b/arch/arm/mach-mx1/mach-scb9328.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-mx1/scb9328.c + * linux/arch/arm/mach-mx1/mach-scb9328.c * * Copyright (c) 2004 Sascha Hauer <saschahauer@web.de> * Copyright (c) 2006-2008 Juergen Beisert <jbeisert@netscape.net> @@ -23,7 +23,7 @@ #include <mach/hardware.h> #include <mach/irqs.h> #include <mach/imx-uart.h> -#include <mach/iomux.h> +#include <mach/iomux-mx1.h> #include "devices.h" diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig index b96c6a38936..742fd4e6dcb 100644 --- a/arch/arm/mach-mx2/Kconfig +++ b/arch/arm/mach-mx2/Kconfig @@ -37,6 +37,7 @@ config MACH_MX27ADS config MACH_PCM038 bool "Phytec phyCORE-i.MX27 CPU module (pcm038)" depends on MACH_MX27 + select MXC_ULPI if USB_ULPI help Include support for phyCORE-i.MX27 (aka pcm038) platform. This includes specific configurations for the module and its peripherals. @@ -55,7 +56,7 @@ config MACH_PCM970_BASEBOARD endchoice -config MACH_EUKREA_CPUIMX27 +config MACH_CPUIMX27 bool "Eukrea CPUIMX27 module" depends on MACH_MX27 help @@ -64,14 +65,14 @@ config MACH_EUKREA_CPUIMX27 config MACH_EUKREA_CPUIMX27_USESDHC2 bool "CPUIMX27 integrates SDHC2 module" - depends on MACH_EUKREA_CPUIMX27 + depends on MACH_CPUIMX27 help This adds support for the internal SDHC2 used on CPUIMX27 used for wifi or eMMC. choice prompt "Baseboard" - depends on MACH_EUKREA_CPUIMX27 + depends on MACH_CPUIMX27 default MACH_EUKREA_MBIMX27_BASEBOARD config MACH_EUKREA_MBIMX27_BASEBOARD @@ -90,7 +91,7 @@ config MACH_MX27_3DS Include support for MX27PDK platform. This includes specific configurations for the board and its peripherals. -config MACH_MX27LITE +config MACH_IMX27LITE bool "LogicPD MX27 LITEKIT platform" depends on MACH_MX27 help @@ -100,6 +101,7 @@ config MACH_MX27LITE config MACH_PCA100 bool "Phytec phyCARD-s (pca100)" depends on MACH_MX27 + select MXC_ULPI if USB_ULPI help Include support for phyCARD-s (aka pca100) platform. This includes specific configurations for the module and its peripherals. diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile index 52aca0aaf9b..e3254faac82 100644 --- a/arch/arm/mach-mx2/Makefile +++ b/arch/arm/mach-mx2/Makefile @@ -4,21 +4,20 @@ # Object file lists. -obj-y := generic.o devices.o serial.o +obj-y := devices.o serial.o -obj-$(CONFIG_MACH_MX21) += clock_imx21.o +obj-$(CONFIG_MACH_MX21) += clock_imx21.o mm-imx21.o obj-$(CONFIG_MACH_MX27) += cpu_imx27.o -obj-$(CONFIG_MACH_MX27) += clock_imx27.o +obj-$(CONFIG_MACH_MX27) += clock_imx27.o mm-imx27.o -obj-$(CONFIG_MACH_MX21ADS) += mx21ads.o -obj-$(CONFIG_MACH_MX27ADS) += mx27ads.o -obj-$(CONFIG_MACH_PCM038) += pcm038.o +obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o +obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o +obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o -obj-$(CONFIG_MACH_MX27_3DS) += mx27pdk.o -obj-$(CONFIG_MACH_MX27LITE) += mx27lite.o -obj-$(CONFIG_MACH_EUKREA_CPUIMX27) += eukrea_cpuimx27.o +obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o +obj-$(CONFIG_MACH_IMX27LITE) += mach-imx27lite.o +obj-$(CONFIG_MACH_CPUIMX27) += mach-cpuimx27.o obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o -obj-$(CONFIG_MACH_PCA100) += pca100.o -obj-$(CONFIG_MACH_MXT_TD60) += mxt_td60.o - +obj-$(CONFIG_MACH_PCA100) += mach-pca100.o +obj-$(CONFIG_MACH_MXT_TD60) += mach-mxt_td60.o diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c index e82b489d121..bb419ef4d13 100644 --- a/arch/arm/mach-mx2/clock_imx21.c +++ b/arch/arm/mach-mx2/clock_imx21.c @@ -23,11 +23,242 @@ #include <linux/module.h> #include <mach/clock.h> +#include <mach/hardware.h> #include <mach/common.h> #include <asm/clkdev.h> #include <asm/div64.h> -#include "crm_regs.h" +#define IO_ADDR_CCM(off) (MX21_IO_ADDRESS(MX21_CCM_BASE_ADDR + (off))) + +/* Register offsets */ +#define CCM_CSCR IO_ADDR_CCM(0x0) +#define CCM_MPCTL0 IO_ADDR_CCM(0x4) +#define CCM_MPCTL1 IO_ADDR_CCM(0x8) +#define CCM_SPCTL0 IO_ADDR_CCM(0xc) +#define CCM_SPCTL1 IO_ADDR_CCM(0x10) +#define CCM_OSC26MCTL IO_ADDR_CCM(0x14) +#define CCM_PCDR0 IO_ADDR_CCM(0x18) +#define CCM_PCDR1 IO_ADDR_CCM(0x1c) +#define CCM_PCCR0 IO_ADDR_CCM(0x20) +#define CCM_PCCR1 IO_ADDR_CCM(0x24) +#define CCM_CCSR IO_ADDR_CCM(0x28) +#define CCM_PMCTL IO_ADDR_CCM(0x2c) +#define CCM_PMCOUNT IO_ADDR_CCM(0x30) +#define CCM_WKGDCTL IO_ADDR_CCM(0x34) + +#define CCM_CSCR_PRESC_OFFSET 29 +#define CCM_CSCR_PRESC_MASK (0x7 << CCM_CSCR_PRESC_OFFSET) + +#define CCM_CSCR_USB_OFFSET 26 +#define CCM_CSCR_USB_MASK (0x7 << CCM_CSCR_USB_OFFSET) +#define CCM_CSCR_SD_OFFSET 24 +#define CCM_CSCR_SD_MASK (0x3 << CCM_CSCR_SD_OFFSET) +#define CCM_CSCR_SPLLRES (1 << 22) +#define CCM_CSCR_MPLLRES (1 << 21) +#define CCM_CSCR_SSI2_OFFSET 20 +#define CCM_CSCR_SSI2 (1 << CCM_CSCR_SSI2_OFFSET) +#define CCM_CSCR_SSI1_OFFSET 19 +#define CCM_CSCR_SSI1 (1 << CCM_CSCR_SSI1_OFFSET) +#define CCM_CSCR_FIR_OFFSET 18 +#define CCM_CSCR_FIR (1 << CCM_CSCR_FIR_OFFSET) +#define CCM_CSCR_SP (1 << 17) +#define CCM_CSCR_MCU (1 << 16) +#define CCM_CSCR_BCLK_OFFSET 10 +#define CCM_CSCR_BCLK_MASK (0xf << CCM_CSCR_BCLK_OFFSET) +#define CCM_CSCR_IPDIV_OFFSET 9 +#define CCM_CSCR_IPDIV (1 << CCM_CSCR_IPDIV_OFFSET) + +#define CCM_CSCR_OSC26MDIV (1 << 4) +#define CCM_CSCR_OSC26M (1 << 3) +#define CCM_CSCR_FPM (1 << 2) +#define CCM_CSCR_SPEN (1 << 1) +#define CCM_CSCR_MPEN 1 + +#define CCM_MPCTL0_CPLM (1 << 31) +#define CCM_MPCTL0_PD_OFFSET 26 +#define CCM_MPCTL0_PD_MASK (0xf << 26) +#define CCM_MPCTL0_MFD_OFFSET 16 +#define CCM_MPCTL0_MFD_MASK (0x3ff << 16) +#define CCM_MPCTL0_MFI_OFFSET 10 +#define CCM_MPCTL0_MFI_MASK (0xf << 10) +#define CCM_MPCTL0_MFN_OFFSET 0 +#define CCM_MPCTL0_MFN_MASK 0x3ff + +#define CCM_MPCTL1_LF (1 << 15) +#define CCM_MPCTL1_BRMO (1 << 6) + +#define CCM_SPCTL0_CPLM (1 << 31) +#define CCM_SPCTL0_PD_OFFSET 26 +#define CCM_SPCTL0_PD_MASK (0xf << 26) +#define CCM_SPCTL0_MFD_OFFSET 16 +#define CCM_SPCTL0_MFD_MASK (0x3ff << 16) +#define CCM_SPCTL0_MFI_OFFSET 10 +#define CCM_SPCTL0_MFI_MASK (0xf << 10) +#define CCM_SPCTL0_MFN_OFFSET 0 +#define CCM_SPCTL0_MFN_MASK 0x3ff + +#define CCM_SPCTL1_LF (1 << 15) +#define CCM_SPCTL1_BRMO (1 << 6) + +#define CCM_OSC26MCTL_PEAK_OFFSET 16 +#define CCM_OSC26MCTL_PEAK_MASK (0x3 << 16) +#define CCM_OSC26MCTL_AGC_OFFSET 8 +#define CCM_OSC26MCTL_AGC_MASK (0x3f << 8) +#define CCM_OSC26MCTL_ANATEST_OFFSET 0 +#define CCM_OSC26MCTL_ANATEST_MASK 0x3f + +#define CCM_PCDR0_SSI2BAUDDIV_OFFSET 26 +#define CCM_PCDR0_SSI2BAUDDIV_MASK (0x3f << 26) +#define CCM_PCDR0_SSI1BAUDDIV_OFFSET 16 +#define CCM_PCDR0_SSI1BAUDDIV_MASK (0x3f << 16) +#define CCM_PCDR0_NFCDIV_OFFSET 12 +#define CCM_PCDR0_NFCDIV_MASK (0xf << 12) +#define CCM_PCDR0_48MDIV_OFFSET 5 +#define CCM_PCDR0_48MDIV_MASK (0x7 << CCM_PCDR0_48MDIV_OFFSET) +#define CCM_PCDR0_FIRIDIV_OFFSET 0 +#define CCM_PCDR0_FIRIDIV_MASK 0x1f +#define CCM_PCDR1_PERDIV4_OFFSET 24 +#define CCM_PCDR1_PERDIV4_MASK (0x3f << 24) +#define CCM_PCDR1_PERDIV3_OFFSET 16 +#define CCM_PCDR1_PERDIV3_MASK (0x3f << 16) +#define CCM_PCDR1_PERDIV2_OFFSET 8 +#define CCM_PCDR1_PERDIV2_MASK (0x3f << 8) +#define CCM_PCDR1_PERDIV1_OFFSET 0 +#define CCM_PCDR1_PERDIV1_MASK 0x3f + +#define CCM_PCCR_HCLK_CSI_OFFSET 31 +#define CCM_PCCR_HCLK_CSI_REG CCM_PCCR0 +#define CCM_PCCR_HCLK_DMA_OFFSET 30 +#define CCM_PCCR_HCLK_DMA_REG CCM_PCCR0 +#define CCM_PCCR_HCLK_BROM_OFFSET 28 +#define CCM_PCCR_HCLK_BROM_REG CCM_PCCR0 +#define CCM_PCCR_HCLK_EMMA_OFFSET 27 +#define CCM_PCCR_HCLK_EMMA_REG CCM_PCCR0 +#define CCM_PCCR_HCLK_LCDC_OFFSET 26 +#define CCM_PCCR_HCLK_LCDC_REG CCM_PCCR0 +#define CCM_PCCR_HCLK_SLCDC_OFFSET 25 +#define CCM_PCCR_HCLK_SLCDC_REG CCM_PCCR0 +#define CCM_PCCR_HCLK_USBOTG_OFFSET 24 +#define CCM_PCCR_HCLK_USBOTG_REG CCM_PCCR0 +#define CCM_PCCR_HCLK_BMI_OFFSET 23 +#define CCM_PCCR_BMI_MASK (1 << CCM_PCCR_BMI_MASK) +#define CCM_PCCR_HCLK_BMI_REG CCM_PCCR0 +#define CCM_PCCR_PERCLK4_OFFSET 22 +#define CCM_PCCR_PERCLK4_REG CCM_PCCR0 +#define CCM_PCCR_SLCDC_OFFSET 21 +#define CCM_PCCR_SLCDC_REG CCM_PCCR0 +#define CCM_PCCR_FIRI_BAUD_OFFSET 20 +#define CCM_PCCR_FIRI_BAUD_MASK (1 << CCM_PCCR_FIRI_BAUD_MASK) +#define CCM_PCCR_FIRI_BAUD_REG CCM_PCCR0 +#define CCM_PCCR_NFC_OFFSET 19 +#define CCM_PCCR_NFC_REG CCM_PCCR0 +#define CCM_PCCR_LCDC_OFFSET 18 +#define CCM_PCCR_LCDC_REG CCM_PCCR0 +#define CCM_PCCR_SSI1_BAUD_OFFSET 17 +#define CCM_PCCR_SSI1_BAUD_REG CCM_PCCR0 +#define CCM_PCCR_SSI2_BAUD_OFFSET 16 +#define CCM_PCCR_SSI2_BAUD_REG CCM_PCCR0 +#define CCM_PCCR_EMMA_OFFSET 15 +#define CCM_PCCR_EMMA_REG CCM_PCCR0 +#define CCM_PCCR_USBOTG_OFFSET 14 +#define CCM_PCCR_USBOTG_REG CCM_PCCR0 +#define CCM_PCCR_DMA_OFFSET 13 +#define CCM_PCCR_DMA_REG CCM_PCCR0 +#define CCM_PCCR_I2C1_OFFSET 12 +#define CCM_PCCR_I2C1_REG CCM_PCCR0 +#define CCM_PCCR_GPIO_OFFSET 11 +#define CCM_PCCR_GPIO_REG CCM_PCCR0 +#define CCM_PCCR_SDHC2_OFFSET 10 +#define CCM_PCCR_SDHC2_REG CCM_PCCR0 +#define CCM_PCCR_SDHC1_OFFSET 9 +#define CCM_PCCR_SDHC1_REG CCM_PCCR0 +#define CCM_PCCR_FIRI_OFFSET 8 +#define CCM_PCCR_FIRI_MASK (1 << CCM_PCCR_BAUD_MASK) +#define CCM_PCCR_FIRI_REG CCM_PCCR0 +#define CCM_PCCR_SSI2_IPG_OFFSET 7 +#define CCM_PCCR_SSI2_REG CCM_PCCR0 +#define CCM_PCCR_SSI1_IPG_OFFSET 6 +#define CCM_PCCR_SSI1_REG CCM_PCCR0 +#define CCM_PCCR_CSPI2_OFFSET 5 +#define CCM_PCCR_CSPI2_REG CCM_PCCR0 +#define CCM_PCCR_CSPI1_OFFSET 4 +#define CCM_PCCR_CSPI1_REG CCM_PCCR0 +#define CCM_PCCR_UART4_OFFSET 3 +#define CCM_PCCR_UART4_REG CCM_PCCR0 +#define CCM_PCCR_UART3_OFFSET 2 +#define CCM_PCCR_UART3_REG CCM_PCCR0 +#define CCM_PCCR_UART2_OFFSET 1 +#define CCM_PCCR_UART2_REG CCM_PCCR0 +#define CCM_PCCR_UART1_OFFSET 0 +#define CCM_PCCR_UART1_REG CCM_PCCR0 + +#define CCM_PCCR_OWIRE_OFFSET 31 +#define CCM_PCCR_OWIRE_REG CCM_PCCR1 +#define CCM_PCCR_KPP_OFFSET 30 +#define CCM_PCCR_KPP_REG CCM_PCCR1 +#define CCM_PCCR_RTC_OFFSET 29 +#define CCM_PCCR_RTC_REG CCM_PCCR1 +#define CCM_PCCR_PWM_OFFSET 28 +#define CCM_PCCR_PWM_REG CCM_PCCR1 +#define CCM_PCCR_GPT3_OFFSET 27 +#define CCM_PCCR_GPT3_REG CCM_PCCR1 +#define CCM_PCCR_GPT2_OFFSET 26 +#define CCM_PCCR_GPT2_REG CCM_PCCR1 +#define CCM_PCCR_GPT1_OFFSET 25 +#define CCM_PCCR_GPT1_REG CCM_PCCR1 +#define CCM_PCCR_WDT_OFFSET 24 +#define CCM_PCCR_WDT_REG CCM_PCCR1 +#define CCM_PCCR_CSPI3_OFFSET 23 +#define CCM_PCCR_CSPI3_REG CCM_PCCR1 + +#define CCM_PCCR_CSPI1_MASK (1 << CCM_PCCR_CSPI1_OFFSET) +#define CCM_PCCR_CSPI2_MASK (1 << CCM_PCCR_CSPI2_OFFSET) +#define CCM_PCCR_CSPI3_MASK (1 << CCM_PCCR_CSPI3_OFFSET) +#define CCM_PCCR_DMA_MASK (1 << CCM_PCCR_DMA_OFFSET) +#define CCM_PCCR_EMMA_MASK (1 << CCM_PCCR_EMMA_OFFSET) +#define CCM_PCCR_GPIO_MASK (1 << CCM_PCCR_GPIO_OFFSET) +#define CCM_PCCR_GPT1_MASK (1 << CCM_PCCR_GPT1_OFFSET) +#define CCM_PCCR_GPT2_MASK (1 << CCM_PCCR_GPT2_OFFSET) +#define CCM_PCCR_GPT3_MASK (1 << CCM_PCCR_GPT3_OFFSET) +#define CCM_PCCR_HCLK_BROM_MASK (1 << CCM_PCCR_HCLK_BROM_OFFSET) +#define CCM_PCCR_HCLK_CSI_MASK (1 << CCM_PCCR_HCLK_CSI_OFFSET) +#define CCM_PCCR_HCLK_DMA_MASK (1 << CCM_PCCR_HCLK_DMA_OFFSET) +#define CCM_PCCR_HCLK_EMMA_MASK (1 << CCM_PCCR_HCLK_EMMA_OFFSET) +#define CCM_PCCR_HCLK_LCDC_MASK (1 << CCM_PCCR_HCLK_LCDC_OFFSET) +#define CCM_PCCR_HCLK_SLCDC_MASK (1 << CCM_PCCR_HCLK_SLCDC_OFFSET) +#define CCM_PCCR_HCLK_USBOTG_MASK (1 << CCM_PCCR_HCLK_USBOTG_OFFSET) +#define CCM_PCCR_I2C1_MASK (1 << CCM_PCCR_I2C1_OFFSET) +#define CCM_PCCR_KPP_MASK (1 << CCM_PCCR_KPP_OFFSET) +#define CCM_PCCR_LCDC_MASK (1 << CCM_PCCR_LCDC_OFFSET) +#define CCM_PCCR_NFC_MASK (1 << CCM_PCCR_NFC_OFFSET) +#define CCM_PCCR_OWIRE_MASK (1 << CCM_PCCR_OWIRE_OFFSET) +#define CCM_PCCR_PERCLK4_MASK (1 << CCM_PCCR_PERCLK4_OFFSET) +#define CCM_PCCR_PWM_MASK (1 << CCM_PCCR_PWM_OFFSET) +#define CCM_PCCR_RTC_MASK (1 << CCM_PCCR_RTC_OFFSET) +#define CCM_PCCR_SDHC1_MASK (1 << CCM_PCCR_SDHC1_OFFSET) +#define CCM_PCCR_SDHC2_MASK (1 << CCM_PCCR_SDHC2_OFFSET) +#define CCM_PCCR_SLCDC_MASK (1 << CCM_PCCR_SLCDC_OFFSET) +#define CCM_PCCR_SSI1_BAUD_MASK (1 << CCM_PCCR_SSI1_BAUD_OFFSET) +#define CCM_PCCR_SSI1_IPG_MASK (1 << CCM_PCCR_SSI1_IPG_OFFSET) +#define CCM_PCCR_SSI2_BAUD_MASK (1 << CCM_PCCR_SSI2_BAUD_OFFSET) +#define CCM_PCCR_SSI2_IPG_MASK (1 << CCM_PCCR_SSI2_IPG_OFFSET) +#define CCM_PCCR_UART1_MASK (1 << CCM_PCCR_UART1_OFFSET) +#define CCM_PCCR_UART2_MASK (1 << CCM_PCCR_UART2_OFFSET) +#define CCM_PCCR_UART3_MASK (1 << CCM_PCCR_UART3_OFFSET) +#define CCM_PCCR_UART4_MASK (1 << CCM_PCCR_UART4_OFFSET) +#define CCM_PCCR_USBOTG_MASK (1 << CCM_PCCR_USBOTG_OFFSET) +#define CCM_PCCR_WDT_MASK (1 << CCM_PCCR_WDT_OFFSET) + +#define CCM_CCSR_32KSR (1 << 15) + +#define CCM_CCSR_CLKMODE1 (1 << 9) +#define CCM_CCSR_CLKMODE0 (1 << 8) + +#define CCM_CCSR_CLKOSEL_OFFSET 0 +#define CCM_CCSR_CLKOSEL_MASK 0x1f + +#define SYS_FMCR 0x14 /* Functional Muxing Control Reg */ +#define SYS_CHIP_ID 0x00 /* The offset of CHIP ID register */ static int _clk_enable(struct clk *clk) { @@ -1002,6 +1233,7 @@ int __init mx21_clocks_init(unsigned long lref, unsigned long href) clk_enable(&uart_clk[0]); #endif - mxc_timer_init(&gpt_clk[0], IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT1); + mxc_timer_init(&gpt_clk[0], MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR), + MX21_INT_GPT1); return 0; } diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c index 18c53a6487f..0f0823c8b17 100644 --- a/arch/arm/mach-mx2/clock_imx27.c +++ b/arch/arm/mach-mx2/clock_imx27.c @@ -29,21 +29,23 @@ #include <mach/common.h> #include <mach/hardware.h> +#define IO_ADDR_CCM(off) (MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR + (off))) + /* Register offsets */ -#define CCM_CSCR (IO_ADDRESS(CCM_BASE_ADDR) + 0x0) -#define CCM_MPCTL0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x4) -#define CCM_MPCTL1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x8) -#define CCM_SPCTL0 (IO_ADDRESS(CCM_BASE_ADDR) + 0xC) -#define CCM_SPCTL1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x10) -#define CCM_OSC26MCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x14) -#define CCM_PCDR0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x18) -#define CCM_PCDR1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x1c) -#define CCM_PCCR0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x20) -#define CCM_PCCR1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x24) -#define CCM_CCSR (IO_ADDRESS(CCM_BASE_ADDR) + 0x28) -#define CCM_PMCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x2c) -#define CCM_PMCOUNT (IO_ADDRESS(CCM_BASE_ADDR) + 0x30) -#define CCM_WKGDCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x34) +#define CCM_CSCR IO_ADDR_CCM(0x0) +#define CCM_MPCTL0 IO_ADDR_CCM(0x4) +#define CCM_MPCTL1 IO_ADDR_CCM(0x8) +#define CCM_SPCTL0 IO_ADDR_CCM(0xc) +#define CCM_SPCTL1 IO_ADDR_CCM(0x10) +#define CCM_OSC26MCTL IO_ADDR_CCM(0x14) +#define CCM_PCDR0 IO_ADDR_CCM(0x18) +#define CCM_PCDR1 IO_ADDR_CCM(0x1c) +#define CCM_PCCR0 IO_ADDR_CCM(0x20) +#define CCM_PCCR1 IO_ADDR_CCM(0x24) +#define CCM_CCSR IO_ADDR_CCM(0x28) +#define CCM_PMCTL IO_ADDR_CCM(0x2c) +#define CCM_PMCOUNT IO_ADDR_CCM(0x30) +#define CCM_WKGDCTL IO_ADDR_CCM(0x34) #define CCM_CSCR_UPDATE_DIS (1 << 31) #define CCM_CSCR_SSI2 (1 << 23) @@ -753,7 +755,8 @@ int __init mx27_clocks_init(unsigned long fref) clk_enable(&uart1_clk); #endif - mxc_timer_init(&gpt1_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT1); + mxc_timer_init(&gpt1_clk, MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR), + MX27_INT_GPT1); return 0; } diff --git a/arch/arm/mach-mx2/cpu_imx27.c b/arch/arm/mach-mx2/cpu_imx27.c index d9e3bf9644c..d8d3b2d84dc 100644 --- a/arch/arm/mach-mx2/cpu_imx27.c +++ b/arch/arm/mach-mx2/cpu_imx27.c @@ -39,7 +39,8 @@ static void query_silicon_parameter(void) * the silicon revision very early we read it here to * avoid any further hooks */ - val = __raw_readl(IO_ADDRESS(SYSCTRL_BASE_ADDR) + SYS_CHIP_ID); + val = __raw_readl(MX27_IO_ADDRESS(MX27_SYSCTRL_BASE_ADDR + + SYS_CHIP_ID)); cpu_silicon_rev = (int)(val >> 28); cpu_partnumber = (int)((val >> 12) & 0xFFFF); diff --git a/arch/arm/mach-mx2/crm_regs.h b/arch/arm/mach-mx2/crm_regs.h deleted file mode 100644 index 749de76b3f9..00000000000 --- a/arch/arm/mach-mx2/crm_regs.h +++ /dev/null @@ -1,258 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __ARCH_ARM_MACH_MX2_CRM_REGS_H__ -#define __ARCH_ARM_MACH_MX2_CRM_REGS_H__ - -#include <mach/hardware.h> - -/* Register offsets */ -#define CCM_CSCR (IO_ADDRESS(CCM_BASE_ADDR) + 0x0) -#define CCM_MPCTL0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x4) -#define CCM_MPCTL1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x8) -#define CCM_SPCTL0 (IO_ADDRESS(CCM_BASE_ADDR) + 0xC) -#define CCM_SPCTL1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x10) -#define CCM_OSC26MCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x14) -#define CCM_PCDR0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x18) -#define CCM_PCDR1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x1c) -#define CCM_PCCR0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x20) -#define CCM_PCCR1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x24) -#define CCM_CCSR (IO_ADDRESS(CCM_BASE_ADDR) + 0x28) -#define CCM_PMCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x2c) -#define CCM_PMCOUNT (IO_ADDRESS(CCM_BASE_ADDR) + 0x30) -#define CCM_WKGDCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x34) - -#define CCM_CSCR_PRESC_OFFSET 29 -#define CCM_CSCR_PRESC_MASK (0x7 << CCM_CSCR_PRESC_OFFSET) - -#define CCM_CSCR_USB_OFFSET 26 -#define CCM_CSCR_USB_MASK (0x7 << CCM_CSCR_USB_OFFSET) -#define CCM_CSCR_SD_OFFSET 24 -#define CCM_CSCR_SD_MASK (0x3 << CCM_CSCR_SD_OFFSET) -#define CCM_CSCR_SPLLRES (1 << 22) -#define CCM_CSCR_MPLLRES (1 << 21) -#define CCM_CSCR_SSI2_OFFSET 20 -#define CCM_CSCR_SSI2 (1 << CCM_CSCR_SSI2_OFFSET) -#define CCM_CSCR_SSI1_OFFSET 19 -#define CCM_CSCR_SSI1 (1 << CCM_CSCR_SSI1_OFFSET) -#define CCM_CSCR_FIR_OFFSET 18 -#define CCM_CSCR_FIR (1 << CCM_CSCR_FIR_OFFSET) -#define CCM_CSCR_SP (1 << 17) -#define CCM_CSCR_MCU (1 << 16) -#define CCM_CSCR_BCLK_OFFSET 10 -#define CCM_CSCR_BCLK_MASK (0xf << CCM_CSCR_BCLK_OFFSET) -#define CCM_CSCR_IPDIV_OFFSET 9 -#define CCM_CSCR_IPDIV (1 << CCM_CSCR_IPDIV_OFFSET) - -#define CCM_CSCR_OSC26MDIV (1 << 4) -#define CCM_CSCR_OSC26M (1 << 3) -#define CCM_CSCR_FPM (1 << 2) -#define CCM_CSCR_SPEN (1 << 1) -#define CCM_CSCR_MPEN 1 - - - -#define CCM_MPCTL0_CPLM (1 << 31) -#define CCM_MPCTL0_PD_OFFSET 26 -#define CCM_MPCTL0_PD_MASK (0xf << 26) -#define CCM_MPCTL0_MFD_OFFSET 16 -#define CCM_MPCTL0_MFD_MASK (0x3ff << 16) -#define CCM_MPCTL0_MFI_OFFSET 10 -#define CCM_MPCTL0_MFI_MASK (0xf << 10) -#define CCM_MPCTL0_MFN_OFFSET 0 -#define CCM_MPCTL0_MFN_MASK 0x3ff - -#define CCM_MPCTL1_LF (1 << 15) -#define CCM_MPCTL1_BRMO (1 << 6) - -#define CCM_SPCTL0_CPLM (1 << 31) -#define CCM_SPCTL0_PD_OFFSET 26 -#define CCM_SPCTL0_PD_MASK (0xf << 26) -#define CCM_SPCTL0_MFD_OFFSET 16 -#define CCM_SPCTL0_MFD_MASK (0x3ff << 16) -#define CCM_SPCTL0_MFI_OFFSET 10 -#define CCM_SPCTL0_MFI_MASK (0xf << 10) -#define CCM_SPCTL0_MFN_OFFSET 0 -#define CCM_SPCTL0_MFN_MASK 0x3ff - -#define CCM_SPCTL1_LF (1 << 15) -#define CCM_SPCTL1_BRMO (1 << 6) - -#define CCM_OSC26MCTL_PEAK_OFFSET 16 -#define CCM_OSC26MCTL_PEAK_MASK (0x3 << 16) -#define CCM_OSC26MCTL_AGC_OFFSET 8 -#define CCM_OSC26MCTL_AGC_MASK (0x3f << 8) -#define CCM_OSC26MCTL_ANATEST_OFFSET 0 -#define CCM_OSC26MCTL_ANATEST_MASK 0x3f - -#define CCM_PCDR0_SSI2BAUDDIV_OFFSET 26 -#define CCM_PCDR0_SSI2BAUDDIV_MASK (0x3f << 26) -#define CCM_PCDR0_SSI1BAUDDIV_OFFSET 16 -#define CCM_PCDR0_SSI1BAUDDIV_MASK (0x3f << 16) -#define CCM_PCDR0_NFCDIV_OFFSET 12 -#define CCM_PCDR0_NFCDIV_MASK (0xf << 12) -#define CCM_PCDR0_48MDIV_OFFSET 5 -#define CCM_PCDR0_48MDIV_MASK (0x7 << CCM_PCDR0_48MDIV_OFFSET) -#define CCM_PCDR0_FIRIDIV_OFFSET 0 -#define CCM_PCDR0_FIRIDIV_MASK 0x1f -#define CCM_PCDR1_PERDIV4_OFFSET 24 -#define CCM_PCDR1_PERDIV4_MASK (0x3f << 24) -#define CCM_PCDR1_PERDIV3_OFFSET 16 -#define CCM_PCDR1_PERDIV3_MASK (0x3f << 16) -#define CCM_PCDR1_PERDIV2_OFFSET 8 -#define CCM_PCDR1_PERDIV2_MASK (0x3f << 8) -#define CCM_PCDR1_PERDIV1_OFFSET 0 -#define CCM_PCDR1_PERDIV1_MASK 0x3f - -#define CCM_PCCR_HCLK_CSI_OFFSET 31 -#define CCM_PCCR_HCLK_CSI_REG CCM_PCCR0 -#define CCM_PCCR_HCLK_DMA_OFFSET 30 -#define CCM_PCCR_HCLK_DMA_REG CCM_PCCR0 -#define CCM_PCCR_HCLK_BROM_OFFSET 28 -#define CCM_PCCR_HCLK_BROM_REG CCM_PCCR0 -#define CCM_PCCR_HCLK_EMMA_OFFSET 27 -#define CCM_PCCR_HCLK_EMMA_REG CCM_PCCR0 -#define CCM_PCCR_HCLK_LCDC_OFFSET 26 -#define CCM_PCCR_HCLK_LCDC_REG CCM_PCCR0 -#define CCM_PCCR_HCLK_SLCDC_OFFSET 25 -#define CCM_PCCR_HCLK_SLCDC_REG CCM_PCCR0 -#define CCM_PCCR_HCLK_USBOTG_OFFSET 24 -#define CCM_PCCR_HCLK_USBOTG_REG CCM_PCCR0 -#define CCM_PCCR_HCLK_BMI_OFFSET 23 -#define CCM_PCCR_BMI_MASK (1 << CCM_PCCR_BMI_MASK) -#define CCM_PCCR_HCLK_BMI_REG CCM_PCCR0 -#define CCM_PCCR_PERCLK4_OFFSET 22 -#define CCM_PCCR_PERCLK4_REG CCM_PCCR0 -#define CCM_PCCR_SLCDC_OFFSET 21 -#define CCM_PCCR_SLCDC_REG CCM_PCCR0 -#define CCM_PCCR_FIRI_BAUD_OFFSET 20 -#define CCM_PCCR_FIRI_BAUD_MASK (1 << CCM_PCCR_FIRI_BAUD_MASK) -#define CCM_PCCR_FIRI_BAUD_REG CCM_PCCR0 -#define CCM_PCCR_NFC_OFFSET 19 -#define CCM_PCCR_NFC_REG CCM_PCCR0 -#define CCM_PCCR_LCDC_OFFSET 18 -#define CCM_PCCR_LCDC_REG CCM_PCCR0 -#define CCM_PCCR_SSI1_BAUD_OFFSET 17 -#define CCM_PCCR_SSI1_BAUD_REG CCM_PCCR0 -#define CCM_PCCR_SSI2_BAUD_OFFSET 16 -#define CCM_PCCR_SSI2_BAUD_REG CCM_PCCR0 -#define CCM_PCCR_EMMA_OFFSET 15 -#define CCM_PCCR_EMMA_REG CCM_PCCR0 -#define CCM_PCCR_USBOTG_OFFSET 14 -#define CCM_PCCR_USBOTG_REG CCM_PCCR0 -#define CCM_PCCR_DMA_OFFSET 13 -#define CCM_PCCR_DMA_REG CCM_PCCR0 -#define CCM_PCCR_I2C1_OFFSET 12 -#define CCM_PCCR_I2C1_REG CCM_PCCR0 -#define CCM_PCCR_GPIO_OFFSET 11 -#define CCM_PCCR_GPIO_REG CCM_PCCR0 -#define CCM_PCCR_SDHC2_OFFSET 10 -#define CCM_PCCR_SDHC2_REG CCM_PCCR0 -#define CCM_PCCR_SDHC1_OFFSET 9 -#define CCM_PCCR_SDHC1_REG CCM_PCCR0 -#define CCM_PCCR_FIRI_OFFSET 8 -#define CCM_PCCR_FIRI_MASK (1 << CCM_PCCR_BAUD_MASK) -#define CCM_PCCR_FIRI_REG CCM_PCCR0 -#define CCM_PCCR_SSI2_IPG_OFFSET 7 -#define CCM_PCCR_SSI2_REG CCM_PCCR0 -#define CCM_PCCR_SSI1_IPG_OFFSET 6 -#define CCM_PCCR_SSI1_REG CCM_PCCR0 -#define CCM_PCCR_CSPI2_OFFSET 5 -#define CCM_PCCR_CSPI2_REG CCM_PCCR0 -#define CCM_PCCR_CSPI1_OFFSET 4 -#define CCM_PCCR_CSPI1_REG CCM_PCCR0 -#define CCM_PCCR_UART4_OFFSET 3 -#define CCM_PCCR_UART4_REG CCM_PCCR0 -#define CCM_PCCR_UART3_OFFSET 2 -#define CCM_PCCR_UART3_REG CCM_PCCR0 -#define CCM_PCCR_UART2_OFFSET 1 -#define CCM_PCCR_UART2_REG CCM_PCCR0 -#define CCM_PCCR_UART1_OFFSET 0 -#define CCM_PCCR_UART1_REG CCM_PCCR0 - -#define CCM_PCCR_OWIRE_OFFSET 31 -#define CCM_PCCR_OWIRE_REG CCM_PCCR1 -#define CCM_PCCR_KPP_OFFSET 30 -#define CCM_PCCR_KPP_REG CCM_PCCR1 -#define CCM_PCCR_RTC_OFFSET 29 -#define CCM_PCCR_RTC_REG CCM_PCCR1 -#define CCM_PCCR_PWM_OFFSET 28 -#define CCM_PCCR_PWM_REG CCM_PCCR1 -#define CCM_PCCR_GPT3_OFFSET 27 -#define CCM_PCCR_GPT3_REG CCM_PCCR1 -#define CCM_PCCR_GPT2_OFFSET 26 -#define CCM_PCCR_GPT2_REG CCM_PCCR1 -#define CCM_PCCR_GPT1_OFFSET 25 -#define CCM_PCCR_GPT1_REG CCM_PCCR1 -#define CCM_PCCR_WDT_OFFSET 24 -#define CCM_PCCR_WDT_REG CCM_PCCR1 -#define CCM_PCCR_CSPI3_OFFSET 23 -#define CCM_PCCR_CSPI3_REG CCM_PCCR1 - -#define CCM_PCCR_CSPI1_MASK (1 << CCM_PCCR_CSPI1_OFFSET) -#define CCM_PCCR_CSPI2_MASK (1 << CCM_PCCR_CSPI2_OFFSET) -#define CCM_PCCR_CSPI3_MASK (1 << CCM_PCCR_CSPI3_OFFSET) -#define CCM_PCCR_DMA_MASK (1 << CCM_PCCR_DMA_OFFSET) -#define CCM_PCCR_EMMA_MASK (1 << CCM_PCCR_EMMA_OFFSET) -#define CCM_PCCR_GPIO_MASK (1 << CCM_PCCR_GPIO_OFFSET) -#define CCM_PCCR_GPT1_MASK (1 << CCM_PCCR_GPT1_OFFSET) -#define CCM_PCCR_GPT2_MASK (1 << CCM_PCCR_GPT2_OFFSET) -#define CCM_PCCR_GPT3_MASK (1 << CCM_PCCR_GPT3_OFFSET) -#define CCM_PCCR_HCLK_BROM_MASK (1 << CCM_PCCR_HCLK_BROM_OFFSET) -#define CCM_PCCR_HCLK_CSI_MASK (1 << CCM_PCCR_HCLK_CSI_OFFSET) -#define CCM_PCCR_HCLK_DMA_MASK (1 << CCM_PCCR_HCLK_DMA_OFFSET) -#define CCM_PCCR_HCLK_EMMA_MASK (1 << CCM_PCCR_HCLK_EMMA_OFFSET) -#define CCM_PCCR_HCLK_LCDC_MASK (1 << CCM_PCCR_HCLK_LCDC_OFFSET) -#define CCM_PCCR_HCLK_SLCDC_MASK (1 << CCM_PCCR_HCLK_SLCDC_OFFSET) -#define CCM_PCCR_HCLK_USBOTG_MASK (1 << CCM_PCCR_HCLK_USBOTG_OFFSET) -#define CCM_PCCR_I2C1_MASK (1 << CCM_PCCR_I2C1_OFFSET) -#define CCM_PCCR_KPP_MASK (1 << CCM_PCCR_KPP_OFFSET) -#define CCM_PCCR_LCDC_MASK (1 << CCM_PCCR_LCDC_OFFSET) -#define CCM_PCCR_NFC_MASK (1 << CCM_PCCR_NFC_OFFSET) -#define CCM_PCCR_OWIRE_MASK (1 << CCM_PCCR_OWIRE_OFFSET) -#define CCM_PCCR_PERCLK4_MASK (1 << CCM_PCCR_PERCLK4_OFFSET) -#define CCM_PCCR_PWM_MASK (1 << CCM_PCCR_PWM_OFFSET) -#define CCM_PCCR_RTC_MASK (1 << CCM_PCCR_RTC_OFFSET) -#define CCM_PCCR_SDHC1_MASK (1 << CCM_PCCR_SDHC1_OFFSET) -#define CCM_PCCR_SDHC2_MASK (1 << CCM_PCCR_SDHC2_OFFSET) -#define CCM_PCCR_SLCDC_MASK (1 << CCM_PCCR_SLCDC_OFFSET) -#define CCM_PCCR_SSI1_BAUD_MASK (1 << CCM_PCCR_SSI1_BAUD_OFFSET) -#define CCM_PCCR_SSI1_IPG_MASK (1 << CCM_PCCR_SSI1_IPG_OFFSET) -#define CCM_PCCR_SSI2_BAUD_MASK (1 << CCM_PCCR_SSI2_BAUD_OFFSET) -#define CCM_PCCR_SSI2_IPG_MASK (1 << CCM_PCCR_SSI2_IPG_OFFSET) -#define CCM_PCCR_UART1_MASK (1 << CCM_PCCR_UART1_OFFSET) -#define CCM_PCCR_UART2_MASK (1 << CCM_PCCR_UART2_OFFSET) -#define CCM_PCCR_UART3_MASK (1 << CCM_PCCR_UART3_OFFSET) -#define CCM_PCCR_UART4_MASK (1 << CCM_PCCR_UART4_OFFSET) -#define CCM_PCCR_USBOTG_MASK (1 << CCM_PCCR_USBOTG_OFFSET) -#define CCM_PCCR_WDT_MASK (1 << CCM_PCCR_WDT_OFFSET) - - -#define CCM_CCSR_32KSR (1 << 15) - -#define CCM_CCSR_CLKMODE1 (1 << 9) -#define CCM_CCSR_CLKMODE0 (1 << 8) - -#define CCM_CCSR_CLKOSEL_OFFSET 0 -#define CCM_CCSR_CLKOSEL_MASK 0x1f - -#define SYS_FMCR 0x14 /* Functional Muxing Control Reg */ -#define SYS_CHIP_ID 0x00 /* The offset of CHIP ID register */ - -#endif /* __ARCH_ARM_MACH_MX2_CRM_REGS_H__ */ diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c index 3956d82b7c4..b91e412f7b3 100644 --- a/arch/arm/mach-mx2/devices.c +++ b/arch/arm/mach-mx2/devices.c @@ -47,65 +47,31 @@ * - i.MX21: 2 channel * - i.MX27: 3 channel */ -static struct resource mxc_spi_resources0[] = { - { - .start = CSPI1_BASE_ADDR, - .end = CSPI1_BASE_ADDR + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_CSPI1, - .end = MXC_INT_CSPI1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource mxc_spi_resources1[] = { - { - .start = CSPI2_BASE_ADDR, - .end = CSPI2_BASE_ADDR + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_CSPI2, - .end = MXC_INT_CSPI2, - .flags = IORESOURCE_IRQ, - }, -}; - -#ifdef CONFIG_MACH_MX27 -static struct resource mxc_spi_resources2[] = { - { - .start = CSPI3_BASE_ADDR, - .end = CSPI3_BASE_ADDR + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_CSPI3, - .end = MXC_INT_CSPI3, - .flags = IORESOURCE_IRQ, - }, -}; -#endif - -struct platform_device mxc_spi_device0 = { - .name = "spi_imx", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_spi_resources0), - .resource = mxc_spi_resources0, -}; +#define DEFINE_IMX_SPI_DEVICE(n, baseaddr, irq) \ + static struct resource mxc_spi_resources ## n[] = { \ + { \ + .start = baseaddr, \ + .end = baseaddr + SZ_4K - 1, \ + .flags = IORESOURCE_MEM, \ + }, { \ + .start = irq, \ + .end = irq, \ + .flags = IORESOURCE_IRQ, \ + }, \ + }; \ + \ + struct platform_device mxc_spi_device ## n = { \ + .name = "spi_imx", \ + .id = n, \ + .num_resources = ARRAY_SIZE(mxc_spi_resources ## n), \ + .resource = mxc_spi_resources ## n, \ + } -struct platform_device mxc_spi_device1 = { - .name = "spi_imx", - .id = 1, - .num_resources = ARRAY_SIZE(mxc_spi_resources1), - .resource = mxc_spi_resources1, -}; +DEFINE_IMX_SPI_DEVICE(0, MX2x_CSPI1_BASE_ADDR, MX2x_INT_CSPI1); +DEFINE_IMX_SPI_DEVICE(1, MX2x_CSPI2_BASE_ADDR, MX2x_INT_CSPI2); #ifdef CONFIG_MACH_MX27 -struct platform_device mxc_spi_device2 = { - .name = "spi_imx", - .id = 2, - .num_resources = ARRAY_SIZE(mxc_spi_resources2), - .resource = mxc_spi_resources2, -}; +DEFINE_IMX_SPI_DEVICE(2, MX27_CSPI3_BASE_ADDR, MX27_INT_CSPI3); #endif /* @@ -113,104 +79,34 @@ struct platform_device mxc_spi_device2 = { * - i.MX21: 3 timers * - i.MX27: 6 timers */ - -/* We use gpt0 as system timer, so do not add a device for this one */ - -static struct resource timer1_resources[] = { - { - .start = GPT2_BASE_ADDR, - .end = GPT2_BASE_ADDR + 0x17, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_GPT2, - .end = MXC_INT_GPT2, - .flags = IORESOURCE_IRQ, - } -}; - -struct platform_device mxc_gpt1 = { - .name = "imx_gpt", - .id = 1, - .num_resources = ARRAY_SIZE(timer1_resources), - .resource = timer1_resources, -}; - -static struct resource timer2_resources[] = { - { - .start = GPT3_BASE_ADDR, - .end = GPT3_BASE_ADDR + 0x17, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_GPT3, - .end = MXC_INT_GPT3, - .flags = IORESOURCE_IRQ, +#define DEFINE_IMX_GPT_DEVICE(n, baseaddr, irq) \ + static struct resource timer ## n ##_resources[] = { \ + { \ + .start = baseaddr, \ + .end = baseaddr + SZ_4K - 1, \ + .flags = IORESOURCE_MEM, \ + }, { \ + .start = irq, \ + .end = irq, \ + .flags = IORESOURCE_IRQ, \ + } \ + }; \ + \ + struct platform_device mxc_gpt ## n = { \ + .name = "imx_gpt", \ + .id = n, \ + .num_resources = ARRAY_SIZE(timer ## n ## _resources), \ + .resource = timer ## n ## _resources, \ } -}; -struct platform_device mxc_gpt2 = { - .name = "imx_gpt", - .id = 2, - .num_resources = ARRAY_SIZE(timer2_resources), - .resource = timer2_resources, -}; +/* We use gpt1 as system timer, so do not add a device for this one */ +DEFINE_IMX_GPT_DEVICE(1, MX2x_GPT2_BASE_ADDR, MX2x_INT_GPT2); +DEFINE_IMX_GPT_DEVICE(2, MX2x_GPT3_BASE_ADDR, MX2x_INT_GPT3); #ifdef CONFIG_MACH_MX27 -static struct resource timer3_resources[] = { - { - .start = GPT4_BASE_ADDR, - .end = GPT4_BASE_ADDR + 0x17, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_GPT4, - .end = MXC_INT_GPT4, - .flags = IORESOURCE_IRQ, - } -}; - -struct platform_device mxc_gpt3 = { - .name = "imx_gpt", - .id = 3, - .num_resources = ARRAY_SIZE(timer3_resources), - .resource = timer3_resources, -}; - -static struct resource timer4_resources[] = { - { - .start = GPT5_BASE_ADDR, - .end = GPT5_BASE_ADDR + 0x17, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_GPT5, - .end = MXC_INT_GPT5, - .flags = IORESOURCE_IRQ, - } -}; - -struct platform_device mxc_gpt4 = { - .name = "imx_gpt", - .id = 4, - .num_resources = ARRAY_SIZE(timer4_resources), - .resource = timer4_resources, -}; - -static struct resource timer5_resources[] = { - { - .start = GPT6_BASE_ADDR, - .end = GPT6_BASE_ADDR + 0x17, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_GPT6, - .end = MXC_INT_GPT6, - .flags = IORESOURCE_IRQ, - } -}; - -struct platform_device mxc_gpt5 = { - .name = "imx_gpt", - .id = 5, - .num_resources = ARRAY_SIZE(timer5_resources), - .resource = timer5_resources, -}; +DEFINE_IMX_GPT_DEVICE(3, MX27_GPT4_BASE_ADDR, MX27_INT_GPT4); +DEFINE_IMX_GPT_DEVICE(4, MX27_GPT5_BASE_ADDR, MX27_INT_GPT5); +DEFINE_IMX_GPT_DEVICE(5, MX27_GPT6_BASE_ADDR, MX27_INT_GPT6); #endif /* @@ -221,9 +117,9 @@ struct platform_device mxc_gpt5 = { */ static struct resource mxc_wdt_resources[] = { { - .start = WDOG_BASE_ADDR, - .end = WDOG_BASE_ADDR + 0x30, - .flags = IORESOURCE_MEM, + .start = MX2x_WDOG_BASE_ADDR, + .end = MX2x_WDOG_BASE_ADDR + SZ_4K - 1, + .flags = IORESOURCE_MEM, }, }; @@ -236,8 +132,8 @@ struct platform_device mxc_wdt = { static struct resource mxc_w1_master_resources[] = { { - .start = OWIRE_BASE_ADDR, - .end = OWIRE_BASE_ADDR + SZ_4K - 1, + .start = MX2x_OWIRE_BASE_ADDR, + .end = MX2x_OWIRE_BASE_ADDR + SZ_4K - 1, .flags = IORESOURCE_MEM, }, }; @@ -249,24 +145,33 @@ struct platform_device mxc_w1_master_device = { .resource = mxc_w1_master_resources, }; -static struct resource mxc_nand_resources[] = { - { - .start = NFC_BASE_ADDR, - .end = NFC_BASE_ADDR + 0xfff, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_NANDFC, - .end = MXC_INT_NANDFC, - .flags = IORESOURCE_IRQ, - }, -}; +#define DEFINE_MXC_NAND_DEVICE(pfx, baseaddr, irq) \ + static struct resource pfx ## _nand_resources[] = { \ + { \ + .start = baseaddr, \ + .end = baseaddr + SZ_4K - 1, \ + .flags = IORESOURCE_MEM, \ + }, { \ + .start = irq, \ + .end = irq, \ + .flags = IORESOURCE_IRQ, \ + }, \ + }; \ + \ + struct platform_device pfx ## _nand_device = { \ + .name = "mxc_nand", \ + .id = 0, \ + .num_resources = ARRAY_SIZE(pfx ## _nand_resources), \ + .resource = pfx ## _nand_resources, \ + } -struct platform_device mxc_nand_device = { - .name = "mxc_nand", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_nand_resources), - .resource = mxc_nand_resources, -}; +#ifdef CONFIG_MACH_MX21 +DEFINE_MXC_NAND_DEVICE(imx21, MX21_NFC_BASE_ADDR, MX21_INT_NANDFC); +#endif + +#ifdef CONFIG_MACH_MX27 +DEFINE_MXC_NAND_DEVICE(imx27, MX27_NFC_BASE_ADDR, MX27_INT_NANDFC); +#endif /* * lcdc: @@ -276,12 +181,12 @@ struct platform_device mxc_nand_device = { */ static struct resource mxc_fb[] = { { - .start = LCDC_BASE_ADDR, - .end = LCDC_BASE_ADDR + 0xFFF, + .start = MX2x_LCDC_BASE_ADDR, + .end = MX2x_LCDC_BASE_ADDR + SZ_4K - 1, .flags = IORESOURCE_MEM, }, { - .start = MXC_INT_LCDC, - .end = MXC_INT_LCDC, + .start = MX2x_INT_LCDC, + .end = MX2x_INT_LCDC, .flags = IORESOURCE_IRQ, } }; @@ -300,13 +205,13 @@ struct platform_device mxc_fb_device = { #ifdef CONFIG_MACH_MX27 static struct resource mxc_fec_resources[] = { { - .start = FEC_BASE_ADDR, - .end = FEC_BASE_ADDR + 0xfff, - .flags = IORESOURCE_MEM, + .start = MX27_FEC_BASE_ADDR, + .end = MX27_FEC_BASE_ADDR + SZ_4K - 1, + .flags = IORESOURCE_MEM, }, { - .start = MXC_INT_FEC, - .end = MXC_INT_FEC, - .flags = IORESOURCE_IRQ, + .start = MX27_INT_FEC, + .end = MX27_INT_FEC, + .flags = IORESOURCE_IRQ, }, }; @@ -318,55 +223,41 @@ struct platform_device mxc_fec_device = { }; #endif -static struct resource mxc_i2c_1_resources[] = { - { - .start = I2C_BASE_ADDR, - .end = I2C_BASE_ADDR + 0x0fff, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_I2C, - .end = MXC_INT_I2C, - .flags = IORESOURCE_IRQ, +#define DEFINE_IMX_I2C_DEVICE(n, baseaddr, irq) \ + static struct resource mxc_i2c_resources ## n[] = { \ + { \ + .start = baseaddr, \ + .end = baseaddr + SZ_4K - 1, \ + .flags = IORESOURCE_MEM, \ + }, { \ + .start = irq, \ + .end = irq, \ + .flags = IORESOURCE_IRQ, \ + } \ + }; \ + \ + struct platform_device mxc_i2c_device ## n = { \ + .name = "imx-i2c", \ + .id = n, \ + .num_resources = ARRAY_SIZE(mxc_i2c_resources ## n), \ + .resource = mxc_i2c_resources ## n, \ } -}; -struct platform_device mxc_i2c_device0 = { - .name = "imx-i2c", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_i2c_1_resources), - .resource = mxc_i2c_1_resources, -}; +DEFINE_IMX_I2C_DEVICE(0, MX2x_I2C_BASE_ADDR, MX2x_INT_I2C); #ifdef CONFIG_MACH_MX27 -static struct resource mxc_i2c_2_resources[] = { - { - .start = I2C2_BASE_ADDR, - .end = I2C2_BASE_ADDR + 0x0fff, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_I2C2, - .end = MXC_INT_I2C2, - .flags = IORESOURCE_IRQ, - } -}; - -struct platform_device mxc_i2c_device1 = { - .name = "imx-i2c", - .id = 1, - .num_resources = ARRAY_SIZE(mxc_i2c_2_resources), - .resource = mxc_i2c_2_resources, -}; +DEFINE_IMX_I2C_DEVICE(1, MX27_I2C2_BASE_ADDR, MX27_INT_I2C2); #endif static struct resource mxc_pwm_resources[] = { { - .start = PWM_BASE_ADDR, - .end = PWM_BASE_ADDR + 0x0fff, - .flags = IORESOURCE_MEM, + .start = MX2x_PWM_BASE_ADDR, + .end = MX2x_PWM_BASE_ADDR + SZ_4K - 1, + .flags = IORESOURCE_MEM, }, { - .start = MXC_INT_PWM, - .end = MXC_INT_PWM, - .flags = IORESOURCE_IRQ, + .start = MX2x_INT_PWM, + .end = MX2x_INT_PWM, + .flags = IORESOURCE_IRQ, } }; @@ -377,77 +268,49 @@ struct platform_device mxc_pwm_device = { .resource = mxc_pwm_resources, }; -/* - * Resource definition for the MXC SDHC - */ -static struct resource mxc_sdhc1_resources[] = { - { - .start = SDHC1_BASE_ADDR, - .end = SDHC1_BASE_ADDR + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_SDHC1, - .end = MXC_INT_SDHC1, - .flags = IORESOURCE_IRQ, - }, { - .start = DMA_REQ_SDHC1, - .end = DMA_REQ_SDHC1, - .flags = IORESOURCE_DMA, - }, -}; - -static u64 mxc_sdhc1_dmamask = DMA_BIT_MASK(32); - -struct platform_device mxc_sdhc_device0 = { - .name = "mxc-mmc", - .id = 0, - .dev = { - .dma_mask = &mxc_sdhc1_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .num_resources = ARRAY_SIZE(mxc_sdhc1_resources), - .resource = mxc_sdhc1_resources, -}; - -static struct resource mxc_sdhc2_resources[] = { - { - .start = SDHC2_BASE_ADDR, - .end = SDHC2_BASE_ADDR + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_SDHC2, - .end = MXC_INT_SDHC2, - .flags = IORESOURCE_IRQ, - }, { - .start = DMA_REQ_SDHC2, - .end = DMA_REQ_SDHC2, - .flags = IORESOURCE_DMA, - }, -}; - -static u64 mxc_sdhc2_dmamask = DMA_BIT_MASK(32); +#define DEFINE_MXC_MMC_DEVICE(n, baseaddr, irq, dmareq) \ + static struct resource mxc_sdhc_resources ## n[] = { \ + { \ + .start = baseaddr, \ + .end = baseaddr + SZ_4K - 1, \ + .flags = IORESOURCE_MEM, \ + }, { \ + .start = irq, \ + .end = irq, \ + .flags = IORESOURCE_IRQ, \ + }, { \ + .start = dmareq, \ + .end = dmareq, \ + .flags = IORESOURCE_DMA, \ + }, \ + }; \ + \ + static u64 mxc_sdhc ## n ## _dmamask = DMA_BIT_MASK(32); \ + \ + struct platform_device mxc_sdhc_device ## n = { \ + .name = "mxc-mmc", \ + .id = n, \ + .dev = { \ + .dma_mask = &mxc_sdhc ## n ## _dmamask, \ + .coherent_dma_mask = DMA_BIT_MASK(32), \ + }, \ + .num_resources = ARRAY_SIZE(mxc_sdhc_resources ## n), \ + .resource = mxc_sdhc_resources ## n, \ + } -struct platform_device mxc_sdhc_device1 = { - .name = "mxc-mmc", - .id = 1, - .dev = { - .dma_mask = &mxc_sdhc2_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .num_resources = ARRAY_SIZE(mxc_sdhc2_resources), - .resource = mxc_sdhc2_resources, -}; +DEFINE_MXC_MMC_DEVICE(0, MX2x_SDHC1_BASE_ADDR, MX2x_INT_SDHC1, MX2x_DMA_REQ_SDHC1); +DEFINE_MXC_MMC_DEVICE(1, MX2x_SDHC2_BASE_ADDR, MX2x_INT_SDHC2, MX2x_DMA_REQ_SDHC2); #ifdef CONFIG_MACH_MX27 static struct resource otg_resources[] = { { - .start = OTG_BASE_ADDR, - .end = OTG_BASE_ADDR + 0x1ff, - .flags = IORESOURCE_MEM, + .start = MX27_USBOTG_BASE_ADDR, + .end = MX27_USBOTG_BASE_ADDR + 0x1ff, + .flags = IORESOURCE_MEM, }, { - .start = MXC_INT_USB3, - .end = MXC_INT_USB3, - .flags = IORESOURCE_IRQ, + .start = MX27_INT_USB3, + .end = MX27_INT_USB3, + .flags = IORESOURCE_IRQ, }, }; @@ -483,12 +346,12 @@ static u64 usbh1_dmamask = DMA_BIT_MASK(32); static struct resource mxc_usbh1_resources[] = { { - .start = OTG_BASE_ADDR + 0x200, - .end = OTG_BASE_ADDR + 0x3ff, + .start = MX27_USBOTG_BASE_ADDR + 0x200, + .end = MX27_USBOTG_BASE_ADDR + 0x3ff, .flags = IORESOURCE_MEM, }, { - .start = MXC_INT_USB1, - .end = MXC_INT_USB1, + .start = MX27_INT_USB1, + .end = MX27_INT_USB1, .flags = IORESOURCE_IRQ, }, }; @@ -509,12 +372,12 @@ static u64 usbh2_dmamask = DMA_BIT_MASK(32); static struct resource mxc_usbh2_resources[] = { { - .start = OTG_BASE_ADDR + 0x400, - .end = OTG_BASE_ADDR + 0x5ff, + .start = MX27_USBOTG_BASE_ADDR + 0x400, + .end = MX27_USBOTG_BASE_ADDR + 0x5ff, .flags = IORESOURCE_MEM, }, { - .start = MXC_INT_USB2, - .end = MXC_INT_USB2, + .start = MX27_INT_USB2, + .end = MX27_INT_USB2, .flags = IORESOURCE_IRQ, }, }; @@ -531,129 +394,102 @@ struct platform_device mxc_usbh2 = { }; #endif -static struct resource imx_ssi_resources0[] = { - { - .start = SSI1_BASE_ADDR, - .end = SSI1_BASE_ADDR + 0x6F, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_SSI1, - .end = MXC_INT_SSI1, - .flags = IORESOURCE_IRQ, - }, { - .name = "tx0", - .start = DMA_REQ_SSI1_TX0, - .end = DMA_REQ_SSI1_TX0, - .flags = IORESOURCE_DMA, - }, { - .name = "rx0", - .start = DMA_REQ_SSI1_RX0, - .end = DMA_REQ_SSI1_RX0, - .flags = IORESOURCE_DMA, - }, { - .name = "tx1", - .start = DMA_REQ_SSI1_TX1, - .end = DMA_REQ_SSI1_TX1, - .flags = IORESOURCE_DMA, - }, { - .name = "rx1", - .start = DMA_REQ_SSI1_RX1, - .end = DMA_REQ_SSI1_RX1, - .flags = IORESOURCE_DMA, - }, -}; - -static struct resource imx_ssi_resources1[] = { - { - .start = SSI2_BASE_ADDR, - .end = SSI2_BASE_ADDR + 0x6F, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_SSI2, - .end = MXC_INT_SSI2, - .flags = IORESOURCE_IRQ, - }, { - .name = "tx0", - .start = DMA_REQ_SSI2_TX0, - .end = DMA_REQ_SSI2_TX0, - .flags = IORESOURCE_DMA, - }, { - .name = "rx0", - .start = DMA_REQ_SSI2_RX0, - .end = DMA_REQ_SSI2_RX0, - .flags = IORESOURCE_DMA, - }, { - .name = "tx1", - .start = DMA_REQ_SSI2_TX1, - .end = DMA_REQ_SSI2_TX1, - .flags = IORESOURCE_DMA, - }, { - .name = "rx1", - .start = DMA_REQ_SSI2_RX1, - .end = DMA_REQ_SSI2_RX1, - .flags = IORESOURCE_DMA, - }, -}; +#define DEFINE_IMX_SSI_DMARES(_name, ssin, suffix) \ + { \ + .name = _name, \ + .start = MX2x_DMA_REQ_SSI ## ssin ## _ ## suffix, \ + .end = MX2x_DMA_REQ_SSI ## ssin ## _ ## suffix, \ + .flags = IORESOURCE_DMA, \ + } -struct platform_device imx_ssi_device0 = { - .name = "imx-ssi", - .id = 0, - .num_resources = ARRAY_SIZE(imx_ssi_resources0), - .resource = imx_ssi_resources0, -}; +#define DEFINE_IMX_SSI_DEVICE(n, ssin, baseaddr, irq) \ + static struct resource imx_ssi_resources ## n[] = { \ + { \ + .start = MX2x_SSI ## ssin ## _BASE_ADDR, \ + .end = MX2x_SSI ## ssin ## _BASE_ADDR + 0x6f, \ + .flags = IORESOURCE_MEM, \ + }, { \ + .start = MX2x_INT_SSI1, \ + .end = MX2x_INT_SSI1, \ + .flags = IORESOURCE_IRQ, \ + }, \ + DEFINE_IMX_SSI_DMARES("tx0", ssin, TX0), \ + DEFINE_IMX_SSI_DMARES("rx0", ssin, RX0), \ + DEFINE_IMX_SSI_DMARES("tx1", ssin, TX1), \ + DEFINE_IMX_SSI_DMARES("rx1", ssin, RX1), \ + }; \ + \ + struct platform_device imx_ssi_device ## n = { \ + .name = "imx-ssi", \ + .id = n, \ + .num_resources = ARRAY_SIZE(imx_ssi_resources ## n), \ + .resource = imx_ssi_resources ## n, \ + } -struct platform_device imx_ssi_device1 = { - .name = "imx-ssi", - .id = 1, - .num_resources = ARRAY_SIZE(imx_ssi_resources1), - .resource = imx_ssi_resources1, -}; +DEFINE_IMX_SSI_DEVICE(0, 1, MX2x_SSI1_BASE_ADDR, MX2x_INT_SSI1); +DEFINE_IMX_SSI_DEVICE(1, 2, MX2x_SSI1_BASE_ADDR, MX2x_INT_SSI1); /* GPIO port description */ -static struct mxc_gpio_port imx_gpio_ports[] = { - { - .chip.label = "gpio-0", - .irq = MXC_INT_GPIO, - .base = IO_ADDRESS(GPIO_BASE_ADDR), - .virtual_irq_start = MXC_GPIO_IRQ_START, - }, { - .chip.label = "gpio-1", - .base = IO_ADDRESS(GPIO_BASE_ADDR + 0x100), - .virtual_irq_start = MXC_GPIO_IRQ_START + 32, - }, { - .chip.label = "gpio-2", - .base = IO_ADDRESS(GPIO_BASE_ADDR + 0x200), - .virtual_irq_start = MXC_GPIO_IRQ_START + 64, - }, { - .chip.label = "gpio-3", - .base = IO_ADDRESS(GPIO_BASE_ADDR + 0x300), - .virtual_irq_start = MXC_GPIO_IRQ_START + 96, - }, { - .chip.label = "gpio-4", - .base = IO_ADDRESS(GPIO_BASE_ADDR + 0x400), - .virtual_irq_start = MXC_GPIO_IRQ_START + 128, - }, { - .chip.label = "gpio-5", - .base = IO_ADDRESS(GPIO_BASE_ADDR + 0x500), - .virtual_irq_start = MXC_GPIO_IRQ_START + 160, +#define DEFINE_MXC_GPIO_PORT_IRQ(SOC, n, _irq) \ + { \ + .chip.label = "gpio-" #n, \ + .irq = _irq, \ + .base = SOC ## _IO_ADDRESS(MX2x_GPIO_BASE_ADDR + \ + n * 0x100), \ + .virtual_irq_start = MXC_GPIO_IRQ_START + n * 32, \ } -}; + +#define DEFINE_MXC_GPIO_PORT(SOC, n) \ + { \ + .chip.label = "gpio-" #n, \ + .base = SOC ## _IO_ADDRESS(MX2x_GPIO_BASE_ADDR + \ + n * 0x100), \ + .virtual_irq_start = MXC_GPIO_IRQ_START + n * 32, \ + } + +#define DEFINE_MXC_GPIO_PORTS(SOC, pfx) \ + static struct mxc_gpio_port pfx ## _gpio_ports[] = { \ + DEFINE_MXC_GPIO_PORT_IRQ(SOC, 0, SOC ## _INT_GPIO), \ + DEFINE_MXC_GPIO_PORT(SOC, 1), \ + DEFINE_MXC_GPIO_PORT(SOC, 2), \ + DEFINE_MXC_GPIO_PORT(SOC, 3), \ + DEFINE_MXC_GPIO_PORT(SOC, 4), \ + DEFINE_MXC_GPIO_PORT(SOC, 5), \ + } + +#ifdef CONFIG_MACH_MX21 +DEFINE_MXC_GPIO_PORTS(MX21, imx21); +#endif + +#ifdef CONFIG_MACH_MX27 +DEFINE_MXC_GPIO_PORTS(MX27, imx27); +#endif int __init mxc_register_gpios(void) { - return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports)); +#ifdef CONFIG_MACH_MX21 + if (cpu_is_mx21()) + return mxc_gpio_init(imx21_gpio_ports, ARRAY_SIZE(imx21_gpio_ports)); + else +#endif +#ifdef CONFIG_MACH_MX27 + if (cpu_is_mx27()) + return mxc_gpio_init(imx27_gpio_ports, ARRAY_SIZE(imx27_gpio_ports)); + else +#endif + return 0; } #ifdef CONFIG_MACH_MX21 static struct resource mx21_usbhc_resources[] = { { - .start = USBOTG_BASE_ADDR, - .end = USBOTG_BASE_ADDR + 0x1FFF, + .start = MX21_BASE_ADDR, + .end = MX21_BASE_ADDR + 0x1FFF, .flags = IORESOURCE_MEM, }, { - .start = MXC_INT_USBHOST, - .end = MXC_INT_USBHOST, + .start = MX21_INT_USBHOST, + .end = MX21_INT_USBHOST, .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-mx2/devices.h b/arch/arm/mach-mx2/devices.h index f12694b0736..84ed5138017 100644 --- a/arch/arm/mach-mx2/devices.h +++ b/arch/arm/mach-mx2/devices.h @@ -1,8 +1,10 @@ extern struct platform_device mxc_gpt1; extern struct platform_device mxc_gpt2; +#ifdef CONFIG_MACH_MX27 extern struct platform_device mxc_gpt3; extern struct platform_device mxc_gpt4; extern struct platform_device mxc_gpt5; +#endif extern struct platform_device mxc_wdt; extern struct platform_device mxc_uart_device0; extern struct platform_device mxc_uart_device1; @@ -11,12 +13,19 @@ extern struct platform_device mxc_uart_device3; extern struct platform_device mxc_uart_device4; extern struct platform_device mxc_uart_device5; extern struct platform_device mxc_w1_master_device; -extern struct platform_device mxc_nand_device; +#ifdef CONFIG_MACH_MX21 +extern struct platform_device imx21_nand_device; +#endif +#ifdef CONFIG_MACH_MX27 +extern struct platform_device imx27_nand_device; +#endif extern struct platform_device mxc_fb_device; extern struct platform_device mxc_fec_device; extern struct platform_device mxc_pwm_device; extern struct platform_device mxc_i2c_device0; +#ifdef CONFIG_MACH_MX27 extern struct platform_device mxc_i2c_device1; +#endif extern struct platform_device mxc_sdhc_device0; extern struct platform_device mxc_sdhc_device1; extern struct platform_device mxc_otg_udc_device; @@ -25,7 +34,9 @@ extern struct platform_device mxc_usbh1; extern struct platform_device mxc_usbh2; extern struct platform_device mxc_spi_device0; extern struct platform_device mxc_spi_device1; +#ifdef CONFIG_MACH_MX27 extern struct platform_device mxc_spi_device2; +#endif extern struct platform_device mx21_usbhc_device; extern struct platform_device imx_ssi_device0; extern struct platform_device imx_ssi_device1; diff --git a/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c b/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c index 7382b6d27ee..f3b169d5245 100644 --- a/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c +++ b/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c @@ -28,7 +28,7 @@ #include <asm/mach/arch.h> #include <mach/common.h> -#include <mach/iomux.h> +#include <mach/iomux-mx27.h> #include <mach/imxfb.h> #include <mach/hardware.h> #include <mach/mmc.h> diff --git a/arch/arm/mach-mx2/eukrea_cpuimx27.c b/arch/arm/mach-mx2/mach-cpuimx27.c index 7b187606682..1f616dcaabc 100644 --- a/arch/arm/mach-mx2/eukrea_cpuimx27.c +++ b/arch/arm/mach-mx2/mach-cpuimx27.c @@ -36,7 +36,7 @@ #include <mach/common.h> #include <mach/hardware.h> #include <mach/i2c.h> -#include <mach/iomux.h> +#include <mach/iomux-mx27.h> #include <mach/imx-uart.h> #include <mach/mxc_nand.h> @@ -142,28 +142,28 @@ static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = { #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) static struct plat_serial8250_port serial_platform_data[] = { { - .mapbase = (unsigned long)(CS3_BASE_ADDR + 0x200000), + .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x200000), .irq = IRQ_GPIOB(23), .uartclk = 14745600, .regshift = 1, .iotype = UPIO_MEM, .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, }, { - .mapbase = (unsigned long)(CS3_BASE_ADDR + 0x400000), + .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x400000), .irq = IRQ_GPIOB(22), .uartclk = 14745600, .regshift = 1, .iotype = UPIO_MEM, .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, }, { - .mapbase = (unsigned long)(CS3_BASE_ADDR + 0x800000), + .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x800000), .irq = IRQ_GPIOB(27), .uartclk = 14745600, .regshift = 1, .iotype = UPIO_MEM, .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, }, { - .mapbase = (unsigned long)(CS3_BASE_ADDR + 0x1000000), + .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x1000000), .irq = IRQ_GPIOB(30), .uartclk = 14745600, .regshift = 1, @@ -189,7 +189,8 @@ static void __init eukrea_cpuimx27_init(void) mxc_register_device(&mxc_uart_device0, &uart_pdata[0]); - mxc_register_device(&mxc_nand_device, &eukrea_cpuimx27_nand_board_info); + mxc_register_device(&imx27_nand_device, + &eukrea_cpuimx27_nand_board_info); i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices, ARRAY_SIZE(eukrea_cpuimx27_i2c_devices)); @@ -224,9 +225,9 @@ static struct sys_timer eukrea_cpuimx27_timer = { }; MACHINE_START(CPUIMX27, "EUKREA CPUIMX27") - .phys_io = AIPI_BASE_ADDR, - .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x100, + .phys_io = MX27_AIPI_BASE_ADDR, + .io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = MX27_PHYS_OFFSET + 0x100, .map_io = mx27_map_io, .init_irq = mx27_init_irq, .init_machine = eukrea_cpuimx27_init, diff --git a/arch/arm/mach-mx2/mx27lite.c b/arch/arm/mach-mx2/mach-imx27lite.c index 82ea227ea0c..b5710bf18b9 100644 --- a/arch/arm/mach-mx2/mx27lite.c +++ b/arch/arm/mach-mx2/mach-imx27lite.c @@ -27,7 +27,7 @@ #include <mach/hardware.h> #include <mach/common.h> #include <mach/imx-uart.h> -#include <mach/iomux.h> +#include <mach/iomux-mx27.h> #include <mach/board-mx27lite.h> #include "devices.h" @@ -85,9 +85,9 @@ static struct sys_timer mx27lite_timer = { }; MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE") - .phys_io = AIPI_BASE_ADDR, - .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x100, + .phys_io = MX27_AIPI_BASE_ADDR, + .io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = MX27_PHYS_OFFSET + 0x100, .map_io = mx27_map_io, .init_irq = mx27_init_irq, .init_machine = mx27lite_init, diff --git a/arch/arm/mach-mx2/mx21ads.c b/arch/arm/mach-mx2/mach-mx21ads.c index cf5f77cbc2f..113e58d7cb4 100644 --- a/arch/arm/mach-mx2/mx21ads.c +++ b/arch/arm/mach-mx2/mach-mx21ads.c @@ -30,7 +30,7 @@ #include <asm/mach/map.h> #include <mach/imx-uart.h> #include <mach/imxfb.h> -#include <mach/iomux.h> +#include <mach/iomux-mx21.h> #include <mach/mxc_nand.h> #include <mach/mmc.h> #include <mach/board-mx21ads.h> @@ -118,8 +118,8 @@ static struct physmap_flash_data mx21ads_flash_data = { }; static struct resource mx21ads_flash_resource = { - .start = CS0_BASE_ADDR, - .end = CS0_BASE_ADDR + 0x02000000 - 1, + .start = MX21_CS0_BASE_ADDR, + .end = MX21_CS0_BASE_ADDR + 0x02000000 - 1, .flags = IORESOURCE_MEM, }; @@ -242,7 +242,7 @@ static struct map_desc mx21ads_io_desc[] __initdata = { */ { .virtual = MX21ADS_MMIO_BASE_ADDR, - .pfn = __phys_to_pfn(CS1_BASE_ADDR), + .pfn = __phys_to_pfn(MX21_CS1_BASE_ADDR), .length = MX21ADS_MMIO_SIZE, .type = MT_DEVICE, }, @@ -268,7 +268,7 @@ static void __init mx21ads_board_init(void) mxc_register_device(&mxc_uart_device3, &uart_pdata); mxc_register_device(&mxc_fb_device, &mx21ads_fb_data); mxc_register_device(&mxc_sdhc_device0, &mx21ads_sdhc_pdata); - mxc_register_device(&mxc_nand_device, &mx21ads_nand_board_info); + mxc_register_device(&imx21_nand_device, &mx21ads_nand_board_info); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); } @@ -284,9 +284,9 @@ static struct sys_timer mx21ads_timer = { MACHINE_START(MX21ADS, "Freescale i.MX21ADS") /* maintainer: Freescale Semiconductor, Inc. */ - .phys_io = AIPI_BASE_ADDR, - .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x100, + .phys_io = MX21_AIPI_BASE_ADDR, + .io_pg_offst = ((MX21_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = MX21_PHYS_OFFSET + 0x100, .map_io = mx21ads_map_io, .init_irq = mx21_init_irq, .init_machine = mx21ads_board_init, diff --git a/arch/arm/mach-mx2/mx27pdk.c b/arch/arm/mach-mx2/mach-mx27_3ds.c index 6761d1b79e4..b2f4e0db3fb 100644 --- a/arch/arm/mach-mx2/mx27pdk.c +++ b/arch/arm/mach-mx2/mach-mx27_3ds.c @@ -26,7 +26,7 @@ #include <mach/hardware.h> #include <mach/common.h> #include <mach/imx-uart.h> -#include <mach/iomux.h> +#include <mach/iomux-mx27.h> #include <mach/board-mx27pdk.h> #include "devices.h" @@ -85,9 +85,9 @@ static struct sys_timer mx27pdk_timer = { MACHINE_START(MX27_3DS, "Freescale MX27PDK") /* maintainer: Freescale Semiconductor, Inc. */ - .phys_io = AIPI_BASE_ADDR, - .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x100, + .phys_io = MX27_AIPI_BASE_ADDR, + .io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = MX27_PHYS_OFFSET + 0x100, .map_io = mx27_map_io, .init_irq = mx27_init_irq, .init_machine = mx27pdk_init, diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mach-mx27ads.c index 83e412b713e..6ce323669e5 100644 --- a/arch/arm/mach-mx2/mx27ads.c +++ b/arch/arm/mach-mx2/mach-mx27ads.c @@ -33,7 +33,7 @@ #include <asm/mach/map.h> #include <mach/gpio.h> #include <mach/imx-uart.h> -#include <mach/iomux.h> +#include <mach/iomux-mx27.h> #include <mach/board-mx27ads.h> #include <mach/mxc_nand.h> #include <mach/i2c.h> @@ -290,7 +290,7 @@ static void __init mx27ads_board_init(void) mxc_register_device(&mxc_uart_device3, &uart_pdata[3]); mxc_register_device(&mxc_uart_device4, &uart_pdata[4]); mxc_register_device(&mxc_uart_device5, &uart_pdata[5]); - mxc_register_device(&mxc_nand_device, &mx27ads_nand_board_info); + mxc_register_device(&imx27_nand_device, &mx27ads_nand_board_info); /* only the i2c master 1 is used on this CPU card */ i2c_register_board_info(1, mx27ads_i2c_devices, @@ -320,7 +320,7 @@ static struct sys_timer mx27ads_timer = { static struct map_desc mx27ads_io_desc[] __initdata = { { .virtual = PBC_BASE_ADDRESS, - .pfn = __phys_to_pfn(CS4_BASE_ADDR), + .pfn = __phys_to_pfn(MX27_CS4_BASE_ADDR), .length = SZ_1M, .type = MT_DEVICE, }, @@ -334,9 +334,9 @@ static void __init mx27ads_map_io(void) MACHINE_START(MX27ADS, "Freescale i.MX27ADS") /* maintainer: Freescale Semiconductor, Inc. */ - .phys_io = AIPI_BASE_ADDR, - .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x100, + .phys_io = MX27_AIPI_BASE_ADDR, + .io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = MX27_PHYS_OFFSET + 0x100, .map_io = mx27ads_map_io, .init_irq = mx27_init_irq, .init_machine = mx27ads_board_init, diff --git a/arch/arm/mach-mx2/mxt_td60.c b/arch/arm/mach-mx2/mach-mxt_td60.c index 8bcc1a5b882..bc385599267 100644 --- a/arch/arm/mach-mx2/mxt_td60.c +++ b/arch/arm/mach-mx2/mach-mxt_td60.c @@ -33,7 +33,7 @@ #include <asm/mach/map.h> #include <linux/gpio.h> #include <mach/imx-uart.h> -#include <mach/iomux.h> +#include <mach/iomux-mx27.h> #include <mach/mxc_nand.h> #include <mach/i2c.h> #include <linux/i2c/pca953x.h> @@ -257,7 +257,7 @@ static void __init mxt_td60_board_init(void) mxc_register_device(&mxc_uart_device0, &uart_pdata[0]); mxc_register_device(&mxc_uart_device1, &uart_pdata[1]); mxc_register_device(&mxc_uart_device2, &uart_pdata[2]); - mxc_register_device(&mxc_nand_device, &mxt_td60_nand_board_info); + mxc_register_device(&imx27_nand_device, &mxt_td60_nand_board_info); i2c_register_board_info(0, mxt_td60_i2c_devices, ARRAY_SIZE(mxt_td60_i2c_devices)); @@ -284,9 +284,9 @@ static struct sys_timer mxt_td60_timer = { MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60") /* maintainer: Maxtrack Industrial */ - .phys_io = AIPI_BASE_ADDR, - .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x100, + .phys_io = MX27_AIPI_BASE_ADDR, + .io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = MX27_PHYS_OFFSET + 0x100, .map_io = mx27_map_io, .init_irq = mx27_init_irq, .init_machine = mxt_td60_board_init, diff --git a/arch/arm/mach-mx2/pca100.c b/arch/arm/mach-mx2/mach-pca100.c index aea3d340d2e..778fff23091 100644 --- a/arch/arm/mach-mx2/pca100.c +++ b/arch/arm/mach-mx2/mach-pca100.c @@ -25,25 +25,36 @@ #include <linux/spi/spi.h> #include <linux/spi/eeprom.h> #include <linux/irq.h> +#include <linux/delay.h> #include <linux/gpio.h> +#include <linux/usb/otg.h> +#include <linux/usb/ulpi.h> +#include <linux/fsl_devices.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> #include <mach/common.h> #include <mach/hardware.h> -#include <mach/iomux.h> +#include <mach/iomux-mx27.h> #include <mach/i2c.h> #include <asm/mach/time.h> #if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) #include <mach/spi.h> #endif #include <mach/imx-uart.h> +#include <mach/audmux.h> +#include <mach/ssi.h> #include <mach/mxc_nand.h> #include <mach/irqs.h> #include <mach/mmc.h> +#include <mach/mxc_ehci.h> +#include <mach/ulpi.h> #include "devices.h" +#define OTG_PHY_CS_GPIO (GPIO_PORTB + 23) +#define USBH2_PHY_CS_GPIO (GPIO_PORTB + 24) + static int pca100_pins[] = { /* UART1 */ PE12_PF_UART1_TXD, @@ -92,6 +103,34 @@ static int pca100_pins[] = { PD29_PF_CSPI1_SCLK, PD30_PF_CSPI1_MISO, PD31_PF_CSPI1_MOSI, + /* OTG */ + OTG_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT, + PC7_PF_USBOTG_DATA5, + PC8_PF_USBOTG_DATA6, + PC9_PF_USBOTG_DATA0, + PC10_PF_USBOTG_DATA2, + PC11_PF_USBOTG_DATA1, + PC12_PF_USBOTG_DATA4, + PC13_PF_USBOTG_DATA3, + PE0_PF_USBOTG_NXT, + PE1_PF_USBOTG_STP, + PE2_PF_USBOTG_DIR, + PE24_PF_USBOTG_CLK, + PE25_PF_USBOTG_DATA7, + /* USBH2 */ + USBH2_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT, + PA0_PF_USBH2_CLK, + PA1_PF_USBH2_DIR, + PA2_PF_USBH2_DATA7, + PA3_PF_USBH2_NXT, + PA4_PF_USBH2_STP, + PD19_AF_USBH2_DATA4, + PD20_AF_USBH2_DATA3, + PD21_AF_USBH2_DATA6, + PD22_AF_USBH2_DATA0, + PD23_AF_USBH2_DATA2, + PD24_AF_USBH2_DATA1, + PD26_AF_USBH2_DATA5, }; static struct imxuart_platform_data uart_pdata = { @@ -157,6 +196,37 @@ static struct spi_imx_master pca100_spi_0_data = { }; #endif +static void pca100_ac97_warm_reset(struct snd_ac97 *ac97) +{ + mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT); + gpio_set_value(GPIO_PORTC + 20, 1); + udelay(2); + gpio_set_value(GPIO_PORTC + 20, 0); + mxc_gpio_mode(PC20_PF_SSI1_FS); + msleep(2); +} + +static void pca100_ac97_cold_reset(struct snd_ac97 *ac97) +{ + mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT); /* FS */ + gpio_set_value(GPIO_PORTC + 20, 0); + mxc_gpio_mode(GPIO_PORTC | 22 | GPIO_GPIO | GPIO_OUT); /* TX */ + gpio_set_value(GPIO_PORTC + 22, 0); + mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_OUT); /* reset */ + gpio_set_value(GPIO_PORTC + 28, 0); + udelay(10); + gpio_set_value(GPIO_PORTC + 28, 1); + mxc_gpio_mode(PC20_PF_SSI1_FS); + mxc_gpio_mode(PC22_PF_SSI1_TXD); + msleep(2); +} + +static struct imx_ssi_platform_data pca100_ssi_pdata = { + .ac97_reset = pca100_ac97_cold_reset, + .ac97_warm_reset = pca100_ac97_warm_reset, + .flags = IMX_SSI_USE_AC97, +}; + static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq, void *data) { @@ -182,21 +252,79 @@ static struct imxmmc_platform_data sdhc_pdata = { .exit = pca100_sdhc2_exit, }; +static int otg_phy_init(struct platform_device *pdev) +{ + gpio_set_value(OTG_PHY_CS_GPIO, 0); + return 0; +} + +static struct mxc_usbh_platform_data otg_pdata = { + .init = otg_phy_init, + .portsc = MXC_EHCI_MODE_ULPI, + .flags = MXC_EHCI_INTERFACE_DIFF_UNI, +}; + +static int usbh2_phy_init(struct platform_device *pdev) +{ + gpio_set_value(USBH2_PHY_CS_GPIO, 0); + return 0; +} + +static struct mxc_usbh_platform_data usbh2_pdata = { + .init = usbh2_phy_init, + .portsc = MXC_EHCI_MODE_ULPI, + .flags = MXC_EHCI_INTERFACE_DIFF_UNI, +}; + +static struct fsl_usb2_platform_data otg_device_pdata = { + .operating_mode = FSL_USB2_DR_DEVICE, + .phy_mode = FSL_USB2_PHY_ULPI, +}; + +static int otg_mode_host; + +static int __init pca100_otg_mode(char *options) +{ + if (!strcmp(options, "host")) + otg_mode_host = 1; + else if (!strcmp(options, "device")) + otg_mode_host = 0; + else + pr_info("otg_mode neither \"host\" nor \"device\". " + "Defaulting to device\n"); + return 0; +} +__setup("otg_mode=", pca100_otg_mode); + static void __init pca100_init(void) { int ret; + /* SSI unit */ + mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0, + MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */ + MXC_AUDMUX_V1_PCR_TFCSEL(3) | + MXC_AUDMUX_V1_PCR_TCLKDIR | /* clock is output */ + MXC_AUDMUX_V1_PCR_RXDSEL(3)); + mxc_audmux_v1_configure_port(3, + MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */ + MXC_AUDMUX_V1_PCR_TFCSEL(0) | + MXC_AUDMUX_V1_PCR_TFSDIR | + MXC_AUDMUX_V1_PCR_RXDSEL(0)); + ret = mxc_gpio_setup_multiple_pins(pca100_pins, ARRAY_SIZE(pca100_pins), "PCA100"); if (ret) printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret); + mxc_register_device(&imx_ssi_device0, &pca100_ssi_pdata); + mxc_register_device(&mxc_uart_device0, &uart_pdata); mxc_gpio_mode(GPIO_PORTC | 29 | GPIO_GPIO | GPIO_IN); mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata); - mxc_register_device(&mxc_nand_device, &pca100_nand_board_info); + mxc_register_device(&imx27_nand_device, &pca100_nand_board_info); /* only the i2c master 1 is used on this CPU card */ i2c_register_board_info(1, pca100_i2c_devices, @@ -220,6 +348,29 @@ static void __init pca100_init(void) mxc_register_device(&mxc_spi_device0, &pca100_spi_0_data); #endif + gpio_request(OTG_PHY_CS_GPIO, "usb-otg-cs"); + gpio_direction_output(OTG_PHY_CS_GPIO, 1); + gpio_request(USBH2_PHY_CS_GPIO, "usb-host2-cs"); + gpio_direction_output(USBH2_PHY_CS_GPIO, 1); + +#if defined(CONFIG_USB_ULPI) + if (otg_mode_host) { + otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, + USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT); + + mxc_register_device(&mxc_otg_host, &otg_pdata); + } + + usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, + USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT); + + mxc_register_device(&mxc_usbh2, &usbh2_pdata); +#endif + if (!otg_mode_host) { + gpio_set_value(OTG_PHY_CS_GPIO, 0); + mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata); + } + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); } @@ -233,9 +384,9 @@ static struct sys_timer pca100_timer = { }; MACHINE_START(PCA100, "phyCARD-i.MX27") - .phys_io = AIPI_BASE_ADDR, - .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x100, + .phys_io = MX27_AIPI_BASE_ADDR, + .io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = MX27_PHYS_OFFSET + 0x100, .map_io = mx27_map_io, .init_irq = mx27_init_irq, .init_machine = pca100_init, diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/mach-pcm038.c index 906d59b0a7a..035fbe046ec 100644 --- a/arch/arm/mach-mx2/pcm038.c +++ b/arch/arm/mach-mx2/mach-pcm038.c @@ -36,10 +36,12 @@ #include <mach/common.h> #include <mach/hardware.h> #include <mach/i2c.h> -#include <mach/iomux.h> +#include <mach/iomux-mx27.h> #include <mach/imx-uart.h> #include <mach/mxc_nand.h> #include <mach/spi.h> +#include <mach/mxc_ehci.h> +#include <mach/ulpi.h> #include "devices.h" @@ -96,6 +98,19 @@ static int pcm038_pins[] = { PC17_PF_SSI4_RXD, PC18_PF_SSI4_TXD, PC19_PF_SSI4_CLK, + /* USB host */ + PA0_PF_USBH2_CLK, + PA1_PF_USBH2_DIR, + PA2_PF_USBH2_DATA7, + PA3_PF_USBH2_NXT, + PA4_PF_USBH2_STP, + PD19_AF_USBH2_DATA4, + PD20_AF_USBH2_DATA3, + PD21_AF_USBH2_DATA6, + PD22_AF_USBH2_DATA0, + PD23_AF_USBH2_DATA2, + PD24_AF_USBH2_DATA1, + PD26_AF_USBH2_DATA5, }; /* @@ -108,8 +123,8 @@ static struct platdata_mtd_ram pcm038_sram_data = { }; static struct resource pcm038_sram_resource = { - .start = CS1_BASE_ADDR, - .end = CS1_BASE_ADDR + 512 * 1024 - 1, + .start = MX27_CS1_BASE_ADDR, + .end = MX27_CS1_BASE_ADDR + 512 * 1024 - 1, .flags = IORESOURCE_MEM, }; @@ -173,9 +188,7 @@ static struct platform_device *platform_devices[] __initdata = { * setup other stuffs to access the sram. */ static void __init pcm038_init_sram(void) { - __raw_writel(0x0000d843, CSCR_U(1)); - __raw_writel(0x22252521, CSCR_L(1)); - __raw_writel(0x22220a00, CSCR_A(1)); + mx27_setup_weimcs(1, 0x0000d843, 0x22252521, 0x22220a00); } static struct imxi2c_platform_data pcm038_i2c_1_data = { @@ -279,6 +292,11 @@ static struct spi_board_info pcm038_spi_board_info[] __initdata = { } }; +static struct mxc_usbh_platform_data usbh2_pdata = { + .portsc = MXC_EHCI_MODE_ULPI, + .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI, +}; + static void __init pcm038_init(void) { mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins), @@ -291,7 +309,7 @@ static void __init pcm038_init(void) mxc_register_device(&mxc_uart_device2, &uart_pdata[2]); mxc_gpio_mode(PE16_AF_OWIRE); - mxc_register_device(&mxc_nand_device, &pcm038_nand_board_info); + mxc_register_device(&imx27_nand_device, &pcm038_nand_board_info); /* only the i2c master 1 is used on this CPU card */ i2c_register_board_info(1, pcm038_i2c_devices, @@ -311,6 +329,8 @@ static void __init pcm038_init(void) spi_register_board_info(pcm038_spi_board_info, ARRAY_SIZE(pcm038_spi_board_info)); + mxc_register_device(&mxc_usbh2, &usbh2_pdata); + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); #ifdef CONFIG_MACH_PCM970_BASEBOARD @@ -328,9 +348,9 @@ static struct sys_timer pcm038_timer = { }; MACHINE_START(PCM038, "phyCORE-i.MX27") - .phys_io = AIPI_BASE_ADDR, - .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x100, + .phys_io = MX27_AIPI_BASE_ADDR, + .io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = MX27_PHYS_OFFSET + 0x100, .map_io = mx27_map_io, .init_irq = mx27_init_irq, .init_machine = pcm038_init, diff --git a/arch/arm/mach-mx2/mm-imx21.c b/arch/arm/mach-mx2/mm-imx21.c new file mode 100644 index 00000000000..64134314d01 --- /dev/null +++ b/arch/arm/mach-mx2/mm-imx21.c @@ -0,0 +1,83 @@ +/* + * arch/arm/mach-mx2/mm-imx21.c + * + * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include <linux/mm.h> +#include <linux/init.h> +#include <mach/hardware.h> +#include <mach/common.h> +#include <asm/pgtable.h> +#include <asm/mach/map.h> + +/* MX21 memory map definition */ +static struct map_desc imx21_io_desc[] __initdata = { + /* + * this fixed mapping covers: + * - AIPI1 + * - AIPI2 + * - AITC + * - ROM Patch + * - and some reserved space + */ + { + .virtual = MX21_AIPI_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MX21_AIPI_BASE_ADDR), + .length = MX21_AIPI_SIZE, + .type = MT_DEVICE + }, + /* + * this fixed mapping covers: + * - CSI + * - ATA + */ + { + .virtual = MX21_SAHB1_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MX21_SAHB1_BASE_ADDR), + .length = MX21_SAHB1_SIZE, + .type = MT_DEVICE + }, + /* + * this fixed mapping covers: + * - EMI + */ + { + .virtual = MX21_X_MEMC_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MX21_X_MEMC_BASE_ADDR), + .length = MX21_X_MEMC_SIZE, + .type = MT_DEVICE + }, +}; + +/* + * Initialize the memory map. It is called during the + * system startup to create static physical to virtual + * memory map for the IO modules. + */ +void __init mx21_map_io(void) +{ + mxc_set_cpu_type(MXC_CPU_MX21); + mxc_arch_reset_init(MX21_IO_ADDRESS(MX21_WDOG_BASE_ADDR)); + + iotable_init(imx21_io_desc, ARRAY_SIZE(imx21_io_desc)); +} + +void __init mx21_init_irq(void) +{ + mxc_init_irq(MX21_IO_ADDRESS(MX21_AVIC_BASE_ADDR)); +} diff --git a/arch/arm/mach-mx2/generic.c b/arch/arm/mach-mx2/mm-imx27.c index ae8f759134d..3366ed44cfd 100644 --- a/arch/arm/mach-mx2/generic.c +++ b/arch/arm/mach-mx2/mm-imx27.c @@ -1,5 +1,5 @@ /* - * generic.c + * arch/arm/mach-mx2/mm-imx27.c * * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) * @@ -26,7 +26,7 @@ #include <asm/mach/map.h> /* MX27 memory map definition */ -static struct map_desc mxc_io_desc[] __initdata = { +static struct map_desc imx27_io_desc[] __initdata = { /* * this fixed mapping covers: * - AIPI1 @@ -36,9 +36,9 @@ static struct map_desc mxc_io_desc[] __initdata = { * - and some reserved space */ { - .virtual = AIPI_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(AIPI_BASE_ADDR), - .length = AIPI_SIZE, + .virtual = MX27_AIPI_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MX27_AIPI_BASE_ADDR), + .length = MX27_AIPI_SIZE, .type = MT_DEVICE }, /* @@ -47,9 +47,9 @@ static struct map_desc mxc_io_desc[] __initdata = { * - ATA */ { - .virtual = SAHB1_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(SAHB1_BASE_ADDR), - .length = SAHB1_SIZE, + .virtual = MX27_SAHB1_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MX27_SAHB1_BASE_ADDR), + .length = MX27_SAHB1_SIZE, .type = MT_DEVICE }, /* @@ -57,11 +57,11 @@ static struct map_desc mxc_io_desc[] __initdata = { * - EMI */ { - .virtual = X_MEMC_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(X_MEMC_BASE_ADDR), - .length = X_MEMC_SIZE, + .virtual = MX27_X_MEMC_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MX27_X_MEMC_BASE_ADDR), + .length = MX27_X_MEMC_SIZE, .type = MT_DEVICE - } + }, }; /* @@ -69,29 +69,15 @@ static struct map_desc mxc_io_desc[] __initdata = { * system startup to create static physical to virtual * memory map for the IO modules. */ -void __init mx21_map_io(void) -{ - mxc_set_cpu_type(MXC_CPU_MX21); - mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR)); - - iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); -} - void __init mx27_map_io(void) { mxc_set_cpu_type(MXC_CPU_MX27); - mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR)); + mxc_arch_reset_init(MX27_IO_ADDRESS(MX27_WDOG_BASE_ADDR)); - iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); + iotable_init(imx27_io_desc, ARRAY_SIZE(imx27_io_desc)); } void __init mx27_init_irq(void) { - mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR)); + mxc_init_irq(MX27_IO_ADDRESS(MX27_AVIC_BASE_ADDR)); } - -void __init mx21_init_irq(void) -{ - mx27_init_irq(); -} - diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c index 3cb7f457e5d..4aafd5b8b85 100644 --- a/arch/arm/mach-mx2/pcm970-baseboard.c +++ b/arch/arm/mach-mx2/pcm970-baseboard.c @@ -24,7 +24,7 @@ #include <asm/mach/arch.h> #include <mach/common.h> -#include <mach/iomux.h> +#include <mach/iomux-mx27.h> #include <mach/imxfb.h> #include <mach/hardware.h> #include <mach/mmc.h> @@ -190,8 +190,8 @@ static struct imx_fb_platform_data pcm038_fb_data = { static struct resource pcm970_sja1000_resources[] = { { - .start = CS4_BASE_ADDR, - .end = CS4_BASE_ADDR + 0x100 - 1, + .start = MX27_CS4_BASE_ADDR, + .end = MX27_CS4_BASE_ADDR + 0x100 - 1, .flags = IORESOURCE_MEM, }, { .start = IRQ_GPIOE(19), diff --git a/arch/arm/mach-mx2/serial.c b/arch/arm/mach-mx2/serial.c index 40a485cdc10..1c0c835b225 100644 --- a/arch/arm/mach-mx2/serial.c +++ b/arch/arm/mach-mx2/serial.c @@ -26,12 +26,12 @@ static struct resource uart0[] = { { - .start = UART1_BASE_ADDR, - .end = UART1_BASE_ADDR + 0x0B5, + .start = MX2x_UART1_BASE_ADDR, + .end = MX2x_UART1_BASE_ADDR + 0x0B5, .flags = IORESOURCE_MEM, }, { - .start = MXC_INT_UART1, - .end = MXC_INT_UART1, + .start = MX2x_INT_UART1, + .end = MX2x_INT_UART1, .flags = IORESOURCE_IRQ, }, }; @@ -45,12 +45,12 @@ struct platform_device mxc_uart_device0 = { static struct resource uart1[] = { { - .start = UART2_BASE_ADDR, - .end = UART2_BASE_ADDR + 0x0B5, + .start = MX2x_UART2_BASE_ADDR, + .end = MX2x_UART2_BASE_ADDR + 0x0B5, .flags = IORESOURCE_MEM, }, { - .start = MXC_INT_UART2, - .end = MXC_INT_UART2, + .start = MX2x_INT_UART2, + .end = MX2x_INT_UART2, .flags = IORESOURCE_IRQ, }, }; @@ -64,12 +64,12 @@ struct platform_device mxc_uart_device1 = { static struct resource uart2[] = { { - .start = UART3_BASE_ADDR, - .end = UART3_BASE_ADDR + 0x0B5, + .start = MX2x_UART3_BASE_ADDR, + .end = MX2x_UART3_BASE_ADDR + 0x0B5, .flags = IORESOURCE_MEM, }, { - .start = MXC_INT_UART3, - .end = MXC_INT_UART3, + .start = MX2x_INT_UART3, + .end = MX2x_INT_UART3, .flags = IORESOURCE_IRQ, }, }; @@ -83,12 +83,12 @@ struct platform_device mxc_uart_device2 = { static struct resource uart3[] = { { - .start = UART4_BASE_ADDR, - .end = UART4_BASE_ADDR + 0x0B5, + .start = MX2x_UART4_BASE_ADDR, + .end = MX2x_UART4_BASE_ADDR + 0x0B5, .flags = IORESOURCE_MEM, }, { - .start = MXC_INT_UART4, - .end = MXC_INT_UART4, + .start = MX2x_INT_UART4, + .end = MX2x_INT_UART4, .flags = IORESOURCE_IRQ, }, }; @@ -103,12 +103,12 @@ struct platform_device mxc_uart_device3 = { #ifdef CONFIG_MACH_MX27 static struct resource uart4[] = { { - .start = UART5_BASE_ADDR, - .end = UART5_BASE_ADDR + 0x0B5, + .start = MX27_UART5_BASE_ADDR, + .end = MX27_UART5_BASE_ADDR + 0x0B5, .flags = IORESOURCE_MEM, }, { - .start = MXC_INT_UART5, - .end = MXC_INT_UART5, + .start = MX27_INT_UART5, + .end = MX27_INT_UART5, .flags = IORESOURCE_IRQ, }, }; @@ -122,12 +122,12 @@ struct platform_device mxc_uart_device4 = { static struct resource uart5[] = { { - .start = UART6_BASE_ADDR, - .end = UART6_BASE_ADDR + 0x0B5, + .start = MX27_UART6_BASE_ADDR, + .end = MX27_UART6_BASE_ADDR + 0x0B5, .flags = IORESOURCE_MEM, }, { - .start = MXC_INT_UART6, - .end = MXC_INT_UART6, + .start = MX27_INT_UART6, + .end = MX27_INT_UART6, .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-mx25/Kconfig b/arch/arm/mach-mx25/Kconfig index cc28f56eae8..54d217314ee 100644 --- a/arch/arm/mach-mx25/Kconfig +++ b/arch/arm/mach-mx25/Kconfig @@ -3,7 +3,6 @@ if ARCH_MX25 comment "MX25 platforms:" config MACH_MX25_3DS - select ARCH_MXC_IOMUX_V3 bool "Support MX25PDK (3DS) Platform" endif diff --git a/arch/arm/mach-mx25/Makefile b/arch/arm/mach-mx25/Makefile index fe23836a9f3..10cebc5ced8 100644 --- a/arch/arm/mach-mx25/Makefile +++ b/arch/arm/mach-mx25/Makefile @@ -1,3 +1,3 @@ obj-y := mm.o devices.o obj-$(CONFIG_ARCH_MX25) += clock.o -obj-$(CONFIG_MACH_MX25_3DS) += mx25pdk.o +obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25pdk.o diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-mx25/clock.c index 37e1359ad0c..155014993b1 100644 --- a/arch/arm/mach-mx25/clock.c +++ b/arch/arm/mach-mx25/clock.c @@ -124,6 +124,11 @@ static unsigned long get_rate_gpt(struct clk *clk) return get_rate_per(5); } +static unsigned long get_rate_lcdc(struct clk *clk) +{ + return get_rate_per(7); +} + static unsigned long get_rate_otg(struct clk *clk) { return 48000000; /* FIXME */ @@ -167,6 +172,8 @@ DEFINE_CLOCK(cspi1_clk, 0, CCM_CGCR1, 5, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(cspi2_clk, 0, CCM_CGCR1, 6, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(cspi3_clk, 0, CCM_CGCR1, 7, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(fec_ahb_clk, 0, CCM_CGCR0, 23, NULL, NULL, NULL); +DEFINE_CLOCK(lcdc_ahb_clk, 0, CCM_CGCR0, 24, NULL, NULL, NULL); +DEFINE_CLOCK(lcdc_per_clk, 0, CCM_CGCR0, 7, NULL, NULL, &lcdc_ahb_clk); DEFINE_CLOCK(uart1_clk, 0, CCM_CGCR2, 14, get_rate_uart, NULL, &uart_per_clk); DEFINE_CLOCK(uart2_clk, 0, CCM_CGCR2, 15, get_rate_uart, NULL, &uart_per_clk); DEFINE_CLOCK(uart3_clk, 0, CCM_CGCR2, 16, get_rate_uart, NULL, &uart_per_clk); @@ -182,6 +189,8 @@ DEFINE_CLOCK(kpp_clk, 0, CCM_CGCR1, 28, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(tsc_clk, 0, CCM_CGCR2, 13, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(i2c_clk, 0, CCM_CGCR0, 6, get_rate_i2c, NULL, NULL); DEFINE_CLOCK(fec_clk, 0, CCM_CGCR1, 15, get_rate_ipg, NULL, &fec_ahb_clk); +DEFINE_CLOCK(dryice_clk, 0, CCM_CGCR1, 8, get_rate_ipg, NULL, NULL); +DEFINE_CLOCK(lcdc_clk, 0, CCM_CGCR1, 29, get_rate_lcdc, NULL, &lcdc_per_clk); #define _REGISTER_CLOCK(d, n, c) \ { \ @@ -214,6 +223,8 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("imx-i2c.1", NULL, i2c_clk) _REGISTER_CLOCK("imx-i2c.2", NULL, i2c_clk) _REGISTER_CLOCK("fec.0", NULL, fec_clk) + _REGISTER_CLOCK("imxdi_rtc.0", NULL, dryice_clk) + _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk) }; int __init mx25_clocks_init(void) @@ -228,6 +239,9 @@ int __init mx25_clocks_init(void) __raw_writel((0xf << 16) | (3 << 26), CRM_BASE + CCM_CGCR1); __raw_writel((1 << 5), CRM_BASE + CCM_CGCR2); + /* Clock source for lcdc is upll */ + __raw_writel(__raw_readl(CRM_BASE+0x64) | (1 << 7), CRM_BASE + 0x64); + mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54); return 0; diff --git a/arch/arm/mach-mx25/devices.c b/arch/arm/mach-mx25/devices.c index 9fdeea1c083..3f4b8a0b5fa 100644 --- a/arch/arm/mach-mx25/devices.c +++ b/arch/arm/mach-mx25/devices.c @@ -438,3 +438,65 @@ struct platform_device mx25_fec_device = { .num_resources = ARRAY_SIZE(mx25_fec_resources), .resource = mx25_fec_resources, }; + +static struct resource mxc_nand_resources[] = { + { + .start = MX25_NFC_BASE_ADDR, + .end = MX25_NFC_BASE_ADDR + 0x1fff, + .flags = IORESOURCE_MEM, + }, + { + .start = MX25_INT_NANDFC, + .end = MX25_INT_NANDFC, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device mxc_nand_device = { + .name = "mxc_nand", + .id = 0, + .num_resources = ARRAY_SIZE(mxc_nand_resources), + .resource = mxc_nand_resources, +}; + +static struct resource mx25_rtc_resources[] = { + { + .start = MX25_DRYICE_BASE_ADDR, + .end = MX25_DRYICE_BASE_ADDR + 0x40, + .flags = IORESOURCE_MEM, + }, + { + .start = MX25_INT_DRYICE, + .flags = IORESOURCE_IRQ + }, +}; + +struct platform_device mx25_rtc_device = { + .name = "imxdi_rtc", + .id = 0, + .num_resources = ARRAY_SIZE(mx25_rtc_resources), + .resource = mx25_rtc_resources, +}; + +static struct resource mx25_fb_resources[] = { + { + .start = MX25_LCDC_BASE_ADDR, + .end = MX25_LCDC_BASE_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, + { + .start = MX25_INT_LCDC, + .end = MX25_INT_LCDC, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device mx25_fb_device = { + .name = "imx-fb", + .id = 0, + .resource = mx25_fb_resources, + .num_resources = ARRAY_SIZE(mx25_fb_resources), + .dev = { + .coherent_dma_mask = 0xFFFFFFFF, + }, +}; diff --git a/arch/arm/mach-mx25/devices.h b/arch/arm/mach-mx25/devices.h index fe5420fcd11..39560e13bc0 100644 --- a/arch/arm/mach-mx25/devices.h +++ b/arch/arm/mach-mx25/devices.h @@ -18,3 +18,6 @@ extern struct platform_device mxc_i2c_device0; extern struct platform_device mxc_i2c_device1; extern struct platform_device mxc_i2c_device2; extern struct platform_device mx25_fec_device; +extern struct platform_device mxc_nand_device; +extern struct platform_device mx25_rtc_device; +extern struct platform_device mx25_fb_device; diff --git a/arch/arm/mach-mx25/mx25pdk.c b/arch/arm/mach-mx25/mach-mx25pdk.c index 6f06089246e..83d74109e7d 100644 --- a/arch/arm/mach-mx25/mx25pdk.c +++ b/arch/arm/mach-mx25/mach-mx25pdk.c @@ -35,8 +35,9 @@ #include <mach/imx-uart.h> #include <mach/mx25.h> #include <mach/mxc_nand.h> +#include <mach/imxfb.h> #include "devices.h" -#include <mach/iomux.h> +#include <mach/iomux-mx25.h> static struct imxuart_platform_data uart_pdata = { .flags = IMXUART_HAVE_RTSCTS, @@ -54,6 +55,31 @@ static struct pad_desc mx25pdk_pads[] = { MX25_PAD_FEC_TX_CLK__FEC_TX_CLK, MX25_PAD_A17__GPIO_2_3, /* FEC_EN, GPIO 35 */ MX25_PAD_D12__GPIO_4_8, /* FEC_RESET_B, GPIO 104 */ + + /* LCD */ + MX25_PAD_LD0__LD0, + MX25_PAD_LD1__LD1, + MX25_PAD_LD2__LD2, + MX25_PAD_LD3__LD3, + MX25_PAD_LD4__LD4, + MX25_PAD_LD5__LD5, + MX25_PAD_LD6__LD6, + MX25_PAD_LD7__LD7, + MX25_PAD_LD8__LD8, + MX25_PAD_LD9__LD9, + MX25_PAD_LD10__LD10, + MX25_PAD_LD11__LD11, + MX25_PAD_LD12__LD12, + MX25_PAD_LD13__LD13, + MX25_PAD_LD14__LD14, + MX25_PAD_LD15__LD15, + MX25_PAD_GPIO_E__LD16, + MX25_PAD_GPIO_F__LD17, + MX25_PAD_HSYNC__HSYNC, + MX25_PAD_VSYNC__VSYNC, + MX25_PAD_LSCLK__LSCLK, + MX25_PAD_OE_ACD__OE_ACD, + MX25_PAD_CONTRAST__CONTRAST, }; static struct fec_platform_data mx25_fec_pdata = { @@ -77,6 +103,40 @@ static void __init mx25pdk_fec_reset(void) gpio_set_value(FEC_RESET_B_GPIO, 1); } +static struct mxc_nand_platform_data mx25pdk_nand_board_info = { + .width = 1, + .hw_ecc = 1, + .flash_bbt = 1, +}; + +static struct imx_fb_videomode mx25pdk_modes[] = { + { + .mode = { + .name = "CRT-VGA", + .refresh = 60, + .xres = 640, + .yres = 480, + .pixclock = 39683, + .left_margin = 45, + .right_margin = 114, + .upper_margin = 33, + .lower_margin = 11, + .hsync_len = 1, + .vsync_len = 1, + }, + .bpp = 16, + .pcr = 0xFA208B80, + }, +}; + +static struct imx_fb_platform_data mx25pdk_fb_pdata = { + .mode = mx25pdk_modes, + .num_modes = ARRAY_SIZE(mx25pdk_modes), + .pwmr = 0x00A903FF, + .lscr1 = 0x00120300, + .dmacr = 0x00020010, +}; + static void __init mx25pdk_init(void) { mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads, @@ -84,6 +144,9 @@ static void __init mx25pdk_init(void) mxc_register_device(&mxc_uart_device0, &uart_pdata); mxc_register_device(&mxc_usbh2, NULL); + mxc_register_device(&mxc_nand_device, &mx25pdk_nand_board_info); + mxc_register_device(&mx25_rtc_device, NULL); + mxc_register_device(&mx25_fb_device, &mx25pdk_fb_pdata); mx25pdk_fec_reset(); mxc_register_device(&mx25_fec_device, &mx25_fec_pdata); @@ -102,7 +165,7 @@ MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)") /* Maintainer: Freescale Semiconductor, Inc. */ .phys_io = MX25_AIPS1_BASE_ADDR, .io_pg_offst = ((MX25_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x100, + .boot_params = MX25_PHYS_OFFSET + 0x100, .map_io = mx25_map_io, .init_irq = mx25_init_irq, .init_machine = mx25pdk_init, diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig index 28294416b0a..3872af1cf2c 100644 --- a/arch/arm/mach-mx3/Kconfig +++ b/arch/arm/mach-mx3/Kconfig @@ -34,6 +34,7 @@ config MACH_MX31ADS_WM1133_EV1 config MACH_PCM037 bool "Support Phytec pcm037 (i.MX31) platforms" select ARCH_MX31 + select MXC_ULPI if USB_ULPI help Include support for Phytec pcm037 platform. This includes specific configurations for the board and its peripherals. @@ -86,6 +87,7 @@ config MACH_QONG config MACH_PCM043 bool "Support Phytec pcm043 (i.MX35) platforms" select ARCH_MX35 + select MXC_ULPI if USB_ULPI help Include support for Phytec pcm043 platform. This includes specific configurations for the board and its peripherals. diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile index 93c7b296be6..5d650fda5d5 100644 --- a/arch/arm/mach-mx3/Makefile +++ b/arch/arm/mach-mx3/Makefile @@ -5,18 +5,22 @@ # Object file lists. obj-y := mm.o devices.o cpu.o -obj-$(CONFIG_ARCH_MX31) += clock.o iomux.o +CFLAGS_mm.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS +CFLAGS_devices.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS +CFLAGS_cpu.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS +obj-$(CONFIG_ARCH_MX31) += clock-imx31.o iomux-imx31.o obj-$(CONFIG_ARCH_MX35) += clock-imx35.o -obj-$(CONFIG_MACH_MX31ADS) += mx31ads.o -obj-$(CONFIG_MACH_MX31LILLY) += mx31lilly.o mx31lilly-db.o -obj-$(CONFIG_MACH_MX31LITE) += mx31lite.o mx31lite-db.o -obj-$(CONFIG_MACH_PCM037) += pcm037.o -obj-$(CONFIG_MACH_PCM037_EET) += pcm037_eet.o -obj-$(CONFIG_MACH_MX31_3DS) += mx31pdk.o -obj-$(CONFIG_MACH_MX31MOBOARD) += mx31moboard.o mx31moboard-devboard.o \ - mx31moboard-marxbot.o -obj-$(CONFIG_MACH_QONG) += qong.o -obj-$(CONFIG_MACH_PCM043) += pcm043.o -obj-$(CONFIG_MACH_ARMADILLO5X0) += armadillo5x0.o -obj-$(CONFIG_MACH_MX35_3DS) += mx35pdk.o -obj-$(CONFIG_MACH_KZM_ARM11_01) += kzmarm11.o +obj-$(CONFIG_MACH_MX31ADS) += mach-mx31ads.o +obj-$(CONFIG_MACH_MX31LILLY) += mach-mx31lilly.o mx31lilly-db.o +obj-$(CONFIG_MACH_MX31LITE) += mach-mx31lite.o mx31lite-db.o +obj-$(CONFIG_MACH_PCM037) += mach-pcm037.o +obj-$(CONFIG_MACH_PCM037_EET) += mach-pcm037_eet.o +obj-$(CONFIG_MACH_MX31_3DS) += mach-mx31_3ds.o +CFLAGS_mach-mx31_3ds.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS +obj-$(CONFIG_MACH_MX31MOBOARD) += mach-mx31moboard.o mx31moboard-devboard.o \ + mx31moboard-marxbot.o mx31moboard-smartbot.o +obj-$(CONFIG_MACH_QONG) += mach-qong.o +obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o +obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o +obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35pdk.o +obj-$(CONFIG_MACH_KZM_ARM11_01) += mach-kzm_arm11_01.o diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock-imx31.c index b5c39a016db..80dba9966b5 100644 --- a/arch/arm/mach-mx3/clock.c +++ b/arch/arm/mach-mx3/clock-imx31.c @@ -616,14 +616,15 @@ int __init mx31_clocks_init(unsigned long fref) mx31_read_cpu_rev(); - if (mx31_revision() >= CHIP_REV_2_0) { + if (mx31_revision() >= MX31_CHIP_REV_2_0) { reg = __raw_readl(MXC_CCM_PMCR1); /* No PLL restart on DVFS switch; enable auto EMI handshake */ reg |= MXC_CCM_PMCR1_PLLRDIS | MXC_CCM_PMCR1_EMIRQ_EN; __raw_writel(reg, MXC_CCM_PMCR1); } - mxc_timer_init(&ipg_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT); + mxc_timer_init(&ipg_clk, MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR), + MX31_INT_GPT); return 0; } diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c index f3f41fa4f21..9f3e943e223 100644 --- a/arch/arm/mach-mx3/clock-imx35.c +++ b/arch/arm/mach-mx3/clock-imx35.c @@ -28,7 +28,7 @@ #include <mach/hardware.h> #include <mach/common.h> -#define CCM_BASE IO_ADDRESS(CCM_BASE_ADDR) +#define CCM_BASE MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR) #define CCM_CCMR 0x00 #define CCM_PDR0 0x04 @@ -502,7 +502,8 @@ int __init mx35_clocks_init() __raw_writel((3 << 26) | ll, CCM_BASE + CCM_CGR2); __raw_writel(0, CCM_BASE + CCM_CGR3); - mxc_timer_init(&gpt_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT); + mxc_timer_init(&gpt_clk, + MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT); return 0; } diff --git a/arch/arm/mach-mx3/cpu.c b/arch/arm/mach-mx3/cpu.c index db828809c67..861afe0fe3a 100644 --- a/arch/arm/mach-mx3/cpu.c +++ b/arch/arm/mach-mx3/cpu.c @@ -41,7 +41,7 @@ void __init mx31_read_cpu_rev(void) u32 i, srev; /* read SREV register from IIM module */ - srev = __raw_readl(IO_ADDRESS(IIM_BASE_ADDR) + MXC_IIMSREV); + srev = __raw_readl(IO_ADDRESS(IIM_BASE_ADDR + MXC_IIMSREV)); for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++) if (srev == mx31_cpu_type[i].srev) { diff --git a/arch/arm/mach-mx3/crm_regs.h b/arch/arm/mach-mx3/crm_regs.h index adfa3627ad8..37a8a07beda 100644 --- a/arch/arm/mach-mx3/crm_regs.h +++ b/arch/arm/mach-mx3/crm_regs.h @@ -24,7 +24,7 @@ #define CKIH_CLK_FREQ_27MHZ 27000000 #define CKIL_CLK_FREQ 32768 -#define MXC_CCM_BASE IO_ADDRESS(CCM_BASE_ADDR) +#define MXC_CCM_BASE MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR) /* Register addresses */ #define MXC_CCM_CCMR (MXC_CCM_BASE + 0x00) diff --git a/arch/arm/mach-mx3/iomux.c b/arch/arm/mach-mx3/iomux-imx31.c index c66ccbcdc11..a1d7fa5123d 100644 --- a/arch/arm/mach-mx3/iomux.c +++ b/arch/arm/mach-mx3/iomux-imx31.c @@ -29,7 +29,7 @@ /* * IOMUX register (base) addresses */ -#define IOMUX_BASE IO_ADDRESS(IOMUXC_BASE_ADDR) +#define IOMUX_BASE MX31_IO_ADDRESS(MX31_IOMUXC_BASE_ADDR) #define IOMUXINT_OBS1 (IOMUX_BASE + 0x000) #define IOMUXINT_OBS2 (IOMUX_BASE + 0x004) #define IOMUXGPR (IOMUX_BASE + 0x008) diff --git a/arch/arm/mach-mx3/armadillo5x0.c b/arch/arm/mach-mx3/mach-armadillo5x0.c index 54aab401dbd..3d72b0b8970 100644 --- a/arch/arm/mach-mx3/armadillo5x0.c +++ b/arch/arm/mach-mx3/mach-armadillo5x0.c @@ -182,8 +182,8 @@ static struct physmap_flash_data armadillo5x0_nor_flash_pdata = { static struct resource armadillo5x0_nor_flash_resource = { .flags = IORESOURCE_MEM, - .start = CS0_BASE_ADDR, - .end = CS0_BASE_ADDR + SZ_64M - 1, + .start = MX31_CS0_BASE_ADDR, + .end = MX31_CS0_BASE_ADDR + SZ_64M - 1, }; static struct platform_device armadillo5x0_nor_flash = { @@ -311,8 +311,8 @@ static struct imxmmc_platform_data sdhc_pdata = { */ static struct resource armadillo5x0_smc911x_resources[] = { { - .start = CS3_BASE_ADDR, - .end = CS3_BASE_ADDR + SZ_32M - 1, + .start = MX31_CS3_BASE_ADDR, + .end = MX31_CS3_BASE_ADDR + SZ_32M - 1, .flags = IORESOURCE_MEM, }, { .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0), @@ -406,9 +406,9 @@ static struct sys_timer armadillo5x0_timer = { MACHINE_START(ARMADILLO5X0, "Armadillo-500") /* Maintainer: Alberto Panizzo */ - .phys_io = AIPS1_BASE_ADDR, - .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x00000100, + .phys_io = MX31_AIPS1_BASE_ADDR, + .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc, + .boot_params = MX3x_PHYS_OFFSET + 0x100, .map_io = mx31_map_io, .init_irq = mx31_init_irq, .timer = &armadillo5x0_timer, diff --git a/arch/arm/mach-mx3/kzmarm11.c b/arch/arm/mach-mx3/mach-kzm_arm11_01.c index 6fa99ce3008..f085d5d1a6d 100644 --- a/arch/arm/mach-mx3/kzmarm11.c +++ b/arch/arm/mach-mx3/mach-kzm_arm11_01.c @@ -46,13 +46,18 @@ #include "devices.h" +#define KZM_ARM11_IO_ADDRESS(x) ( \ + IMX_IO_ADDRESS(x, MX31_CS4) ?: \ + IMX_IO_ADDRESS(x, MX31_CS5) ?: \ + MX31_IO_ADDRESS(x)) + #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) /* * KZM-ARM11-01 has an external UART on FPGA */ static struct plat_serial8250_port serial_platform_data[] = { { - .membase = IO_ADDRESS(KZM_ARM11_16550), + .membase = KZM_ARM11_IO_ADDRESS(KZM_ARM11_16550), .mapbase = KZM_ARM11_16550, .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), .irqflags = IRQ_TYPE_EDGE_RISING, @@ -102,9 +107,9 @@ static int __init kzm_init_ext_uart(void) /* * Unmask UART interrupt */ - tmp = __raw_readb(IO_ADDRESS(KZM_ARM11_CTL1)); + tmp = __raw_readb(KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1)); tmp |= 0x2; - __raw_writeb(tmp, IO_ADDRESS(KZM_ARM11_CTL1)); + __raw_writeb(tmp, KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1)); return platform_device_register(&serial_device); } @@ -128,8 +133,8 @@ static struct smsc911x_platform_config kzm_smsc9118_config = { static struct resource kzm_smsc9118_resources[] = { { - .start = CS5_BASE_ADDR, - .end = CS5_BASE_ADDR + SZ_128K - 1, + .start = MX31_CS5_BASE_ADDR, + .end = MX31_CS5_BASE_ADDR + SZ_128K - 1, .flags = IORESOURCE_MEM, }, { @@ -222,15 +227,15 @@ static void __init kzm_board_init(void) */ static struct map_desc kzm_io_desc[] __initdata = { { - .virtual = CS4_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(CS4_BASE_ADDR), - .length = CS4_SIZE, + .virtual = MX31_CS4_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR), + .length = MX31_CS4_SIZE, .type = MT_DEVICE }, { - .virtual = CS5_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(CS5_BASE_ADDR), - .length = CS5_SIZE, + .virtual = MX31_CS5_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MX31_CS5_BASE_ADDR), + .length = MX31_CS5_SIZE, .type = MT_DEVICE }, }; @@ -258,9 +263,9 @@ static struct sys_timer kzm_timer = { * initialize __mach_desc_KZM_ARM11_01 data structure. */ MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01") - .phys_io = AIPS1_BASE_ADDR, - .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x100, + .phys_io = MX31_AIPS1_BASE_ADDR, + .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc, + .boot_params = MX3x_PHYS_OFFSET + 0x100, .map_io = kzm_map_io, .init_irq = mx31_init_irq, .init_machine = kzm_board_init, diff --git a/arch/arm/mach-mx3/mx31pdk.c b/arch/arm/mach-mx3/mach-mx31_3ds.c index 18715f1aa7e..b88c18ad769 100644 --- a/arch/arm/mach-mx3/mx31pdk.c +++ b/arch/arm/mach-mx3/mach-mx31_3ds.c @@ -211,9 +211,9 @@ static int __init mx31pdk_init_expio(void) */ static struct map_desc mx31pdk_io_desc[] __initdata = { { - .virtual = CS5_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(CS5_BASE_ADDR), - .length = CS5_SIZE, + .virtual = MX31_CS5_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MX31_CS5_BASE_ADDR), + .length = MX31_CS5_SIZE, .type = MT_DEVICE, }, }; @@ -256,9 +256,9 @@ static struct sys_timer mx31pdk_timer = { */ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)") /* Maintainer: Freescale Semiconductor, Inc. */ - .phys_io = AIPS1_BASE_ADDR, - .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x100, + .phys_io = MX31_AIPS1_BASE_ADDR, + .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc, + .boot_params = MX3x_PHYS_OFFSET + 0x100, .map_io = mx31pdk_map_io, .init_irq = mx31_init_irq, .init_machine = mxc_board_init, diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mach-mx31ads.c index 938c549767d..b3d1a1895c2 100644 --- a/arch/arm/mach-mx3/mx31ads.c +++ b/arch/arm/mach-mx3/mach-mx31ads.c @@ -60,7 +60,7 @@ static struct plat_serial8250_port serial_platform_data[] = { { .membase = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTA), - .mapbase = (unsigned long)(CS4_BASE_ADDR + PBC_SC16C652_UARTA), + .mapbase = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTA), .irq = EXPIO_INT_XUART_INTA, .uartclk = 14745600, .regshift = 0, @@ -68,7 +68,7 @@ static struct plat_serial8250_port serial_platform_data[] = { .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ, }, { .membase = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTB), - .mapbase = (unsigned long)(CS4_BASE_ADDR + PBC_SC16C652_UARTB), + .mapbase = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTB), .irq = EXPIO_INT_XUART_INTB, .uartclk = 14745600, .regshift = 0, @@ -309,12 +309,8 @@ static struct regulator_init_data ldo1_data = { }; static struct regulator_consumer_supply ldo2_consumers[] = { - { - .supply = "AVDD", - }, - { - .supply = "HPVDD", - }, + { .supply = "AVDD", .dev_name = "1-001a" }, + { .supply = "HPVDD", .dev_name = "1-001a" }, }; /* CODEC and SIM */ @@ -385,8 +381,6 @@ static struct wm8350_audio_platform_data imx32ads_wm8350_setup = { static int mx31_wm8350_init(struct wm8350 *wm8350) { - int i; - wm8350_gpio_config(wm8350, 0, WM8350_GPIO_DIR_IN, WM8350_GPIO0_PWR_ON_IN, WM8350_GPIO_ACTIVE_LOW, WM8350_GPIO_PULL_UP, WM8350_GPIO_INVERT_OFF, @@ -422,10 +416,6 @@ static int mx31_wm8350_init(struct wm8350 *wm8350) WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF, WM8350_GPIO_DEBOUNCE_OFF); - /* Fix up for our own supplies. */ - for (i = 0; i < ARRAY_SIZE(ldo2_consumers); i++) - ldo2_consumers[i].dev = wm8350->dev; - wm8350_register_regulator(wm8350, WM8350_DCDC_1, &sw1a_data); wm8350_register_regulator(wm8350, WM8350_DCDC_3, &viohi_data); wm8350_register_regulator(wm8350, WM8350_DCDC_4, &violo_data); @@ -493,14 +483,27 @@ static void mxc_init_i2c(void) } #endif +static unsigned int ssi_pins[] = { + MX31_PIN_SFS5__SFS5, + MX31_PIN_SCK5__SCK5, + MX31_PIN_SRXD5__SRXD5, + MX31_PIN_STXD5__STXD5, +}; + +static void mxc_init_audio(void) +{ + mxc_register_device(&imx_ssi_device0, NULL); + mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi"); +} + /*! * This structure defines static mappings for the i.MX31ADS board. */ static struct map_desc mx31ads_io_desc[] __initdata = { { - .virtual = CS4_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(CS4_BASE_ADDR), - .length = CS4_SIZE / 2, + .virtual = MX31_CS4_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR), + .length = MX31_CS4_SIZE / 2, .type = MT_DEVICE }, }; @@ -528,6 +531,7 @@ static void __init mxc_board_init(void) mxc_init_extuart(); mxc_init_imx_uart(); mxc_init_i2c(); + mxc_init_audio(); } static void __init mx31ads_timer_init(void) @@ -545,9 +549,9 @@ static struct sys_timer mx31ads_timer = { */ MACHINE_START(MX31ADS, "Freescale MX31ADS") /* Maintainer: Freescale Semiconductor, Inc. */ - .phys_io = AIPS1_BASE_ADDR, - .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x100, + .phys_io = MX31_AIPS1_BASE_ADDR, + .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc, + .boot_params = MX3x_PHYS_OFFSET + 0x100, .map_io = mx31ads_map_io, .init_irq = mx31ads_init_irq, .init_machine = mxc_board_init, diff --git a/arch/arm/mach-mx3/mx31lilly.c b/arch/arm/mach-mx3/mach-mx31lilly.c index 9ce029f554b..80847b04c06 100644 --- a/arch/arm/mach-mx3/mx31lilly.c +++ b/arch/arm/mach-mx3/mach-mx31lilly.c @@ -57,8 +57,8 @@ static struct resource smsc91x_resources[] = { { - .start = CS4_BASE_ADDR, - .end = CS4_BASE_ADDR + 0xffff, + .start = MX31_CS4_BASE_ADDR, + .end = MX31_CS4_BASE_ADDR + 0xffff, .flags = IORESOURCE_MEM, }, { @@ -195,9 +195,9 @@ static struct sys_timer mx31lilly_timer = { }; MACHINE_START(LILLY1131, "INCO startec LILLY-1131") - .phys_io = AIPS1_BASE_ADDR, - .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x100, + .phys_io = MX31_AIPS1_BASE_ADDR, + .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc, + .boot_params = MX3x_PHYS_OFFSET + 0x100, .map_io = mx31_map_io, .init_irq = mx31_init_irq, .init_machine = mx31lilly_board_init, diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mach-mx31lite.c index 789b20d1730..2b6d1140087 100644 --- a/arch/arm/mach-mx3/mx31lite.c +++ b/arch/arm/mach-mx3/mach-mx31lite.c @@ -82,8 +82,8 @@ static struct smsc911x_platform_config smsc911x_config = { static struct resource smsc911x_resources[] = { { - .start = CS4_BASE_ADDR, - .end = CS4_BASE_ADDR + 0x100, + .start = MX31_CS4_BASE_ADDR, + .end = MX31_CS4_BASE_ADDR + 0x100, .flags = IORESOURCE_MEM, }, { .start = IOMUX_TO_IRQ(MX31_PIN_SFS6), @@ -214,9 +214,9 @@ static struct platform_device physmap_flash_device = { */ static struct map_desc mx31lite_io_desc[] __initdata = { { - .virtual = CS4_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(CS4_BASE_ADDR), - .length = CS4_SIZE, + .virtual = MX31_CS4_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR), + .length = MX31_CS4_SIZE, .type = MT_DEVICE } }; @@ -287,9 +287,9 @@ struct sys_timer mx31lite_timer = { MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM") /* Maintainer: Freescale Semiconductor, Inc. */ - .phys_io = AIPS1_BASE_ADDR, - .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x100, + .phys_io = MX31_AIPS1_BASE_ADDR, + .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc, + .boot_params = MX3x_PHYS_OFFSET + 0x100, .map_io = mx31lite_map_io, .init_irq = mx31_init_irq, .init_machine = mxc_board_init, diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mach-mx31moboard.c index cfd605d078e..a7dc5191bf5 100644 --- a/arch/arm/mach-mx3/mx31moboard.c +++ b/arch/arm/mach-mx3/mach-mx31moboard.c @@ -96,9 +96,6 @@ static unsigned int moboard_pins[] = { /* LEDs */ MX31_PIN_SVEN0__GPIO2_0, MX31_PIN_STX0__GPIO2_1, MX31_PIN_SRX0__GPIO2_2, MX31_PIN_SIMPD0__GPIO2_3, - /* SEL */ - MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9, - MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11, /* SPI1 */ MX31_PIN_CSPI2_MOSI__MOSI, MX31_PIN_CSPI2_MISO__MISO, MX31_PIN_CSPI2_SCLK__SCLK, MX31_PIN_CSPI2_SPI_RDY__SPI_RDY, @@ -352,9 +349,7 @@ static struct fsl_usb2_platform_data usb_pdata = { static int moboard_usbh2_hw_init(struct platform_device *pdev) { - int ret = gpio_request(USBH2_EN_B, "usbh2-en"); - if (ret) - return ret; + int ret; mxc_iomux_set_gpr(MUX_PGP_UH2, true); @@ -371,6 +366,9 @@ static int moboard_usbh2_hw_init(struct platform_device *pdev) mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG); mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG); + ret = gpio_request(USBH2_EN_B, "usbh2-en"); + if (ret) + return ret; gpio_direction_output(USBH2_EN_B, 0); return 0; @@ -431,34 +429,6 @@ static struct platform_device mx31moboard_leds_device = { }, }; -#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1) -#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1) -#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1) -#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1) - -static void mx31moboard_init_sel_gpios(void) -{ - if (!gpio_request(SEL0, "sel0")) { - gpio_direction_input(SEL0); - gpio_export(SEL0, true); - } - - if (!gpio_request(SEL1, "sel1")) { - gpio_direction_input(SEL1); - gpio_export(SEL1, true); - } - - if (!gpio_request(SEL2, "sel2")) { - gpio_direction_input(SEL2); - gpio_export(SEL2, true); - } - - if (!gpio_request(SEL3, "sel3")) { - gpio_direction_input(SEL3); - gpio_export(SEL3, true); - } -} - static struct ipu_platform_data mx3_ipu_data = { .irq_base = MXC_IPU_IRQ_START, }; @@ -518,8 +488,6 @@ static void __init mxc_board_init(void) mxc_register_device(&mxc_uart_device4, &uart4_pdata); - mx31moboard_init_sel_gpios(); - mxc_register_device(&mxc_i2c_device0, &moboard_i2c0_pdata); mxc_register_device(&mxc_i2c_device1, &moboard_i2c1_pdata); @@ -552,6 +520,9 @@ static void __init mxc_board_init(void) case MX31MARXBOT: mx31moboard_marxbot_init(); break; + case MX31SMARTBOT: + mx31moboard_smartbot_init(); + break; default: printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n", mx31moboard_baseboard); @@ -569,9 +540,9 @@ struct sys_timer mx31moboard_timer = { MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard") /* Maintainer: Valentin Longchamp, EPFL Mobots group */ - .phys_io = AIPS1_BASE_ADDR, - .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x100, + .phys_io = MX31_AIPS1_BASE_ADDR, + .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc, + .boot_params = MX3x_PHYS_OFFSET + 0x100, .map_io = mx31_map_io, .init_irq = mx31_init_irq, .init_machine = mxc_board_init, diff --git a/arch/arm/mach-mx3/mx35pdk.c b/arch/arm/mach-mx3/mach-mx35pdk.c index 0bbc65ea23c..bcac84d4dca 100644 --- a/arch/arm/mach-mx3/mx35pdk.c +++ b/arch/arm/mach-mx3/mach-mx35pdk.c @@ -106,9 +106,9 @@ struct sys_timer mx35pdk_timer = { MACHINE_START(MX35_3DS, "Freescale MX35PDK") /* Maintainer: Freescale Semiconductor, Inc */ - .phys_io = AIPS1_BASE_ADDR, - .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x100, + .phys_io = MX35_AIPS1_BASE_ADDR, + .io_pg_offst = ((MX35_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = MX3x_PHYS_OFFSET + 0x100, .map_io = mx35_map_io, .init_irq = mx35_init_irq, .init_machine = mxc_board_init, diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/mach-pcm037.c index 5be396917c9..11f53155916 100644 --- a/arch/arm/mach-mx3/pcm037.c +++ b/arch/arm/mach-mx3/mach-pcm037.c @@ -33,6 +33,9 @@ #include <linux/irq.h> #include <linux/fsl_devices.h> #include <linux/can/platform/sja1000.h> +#include <linux/usb/otg.h> +#include <linux/usb/ulpi.h> +#include <linux/fsl_devices.h> #include <media/soc_camera.h> @@ -51,6 +54,8 @@ #include <mach/mx3_camera.h> #include <mach/mx3fb.h> #include <mach/mxc_nand.h> +#include <mach/mxc_ehci.h> +#include <mach/ulpi.h> #include "devices.h" #include "pcm037.h" @@ -172,19 +177,7 @@ static unsigned int pcm037_pins[] = { MX31_PIN_CSI_VSYNC__CSI_VSYNC, /* GPIO */ IOMUX_MODE(MX31_PIN_ATA_DMACK, IOMUX_CONFIG_GPIO), -}; - -static struct physmap_flash_data pcm037_flash_data = { - .width = 2, -}; - -static struct resource pcm037_flash_resource = { - .start = 0xa0000000, - .end = 0xa1ffffff, - .flags = IORESOURCE_MEM, -}; - -static int usbotg_pins[] = { + /* OTG */ MX31_PIN_USBOTG_DATA0__USBOTG_DATA0, MX31_PIN_USBOTG_DATA1__USBOTG_DATA1, MX31_PIN_USBOTG_DATA2__USBOTG_DATA2, @@ -197,39 +190,29 @@ static int usbotg_pins[] = { MX31_PIN_USBOTG_DIR__USBOTG_DIR, MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP, + /* USB host 2 */ + IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC), }; -/* USB OTG HS port */ -static int __init gpio_usbotg_hs_activate(void) -{ - int ret = mxc_iomux_setup_multiple_pins(usbotg_pins, - ARRAY_SIZE(usbotg_pins), "usbotg"); - - if (ret < 0) { - printk(KERN_ERR "Cannot set up OTG pins\n"); - return ret; - } - - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); - - return 0; -} +static struct physmap_flash_data pcm037_flash_data = { + .width = 2, +}; -/* OTG config */ -static struct fsl_usb2_platform_data usb_pdata = { - .operating_mode = FSL_USB2_DR_DEVICE, - .phy_mode = FSL_USB2_PHY_ULPI, +static struct resource pcm037_flash_resource = { + .start = 0xa0000000, + .end = 0xa1ffffff, + .flags = IORESOURCE_MEM, }; static struct platform_device pcm037_flash = { @@ -248,8 +231,8 @@ static struct imxuart_platform_data uart_pdata = { static struct resource smsc911x_resources[] = { { - .start = CS1_BASE_ADDR + 0x300, - .end = CS1_BASE_ADDR + 0x300 + SZ_64K - 1, + .start = MX31_CS1_BASE_ADDR + 0x300, + .end = MX31_CS1_BASE_ADDR + 0x300 + SZ_64K - 1, .flags = IORESOURCE_MEM, }, { .start = IOMUX_TO_IRQ(MX31_PIN_GPIO3_1), @@ -281,8 +264,8 @@ static struct platdata_mtd_ram pcm038_sram_data = { }; static struct resource pcm038_sram_resource = { - .start = CS4_BASE_ADDR, - .end = CS4_BASE_ADDR + 512 * 1024 - 1, + .start = MX31_CS4_BASE_ADDR, + .end = MX31_CS4_BASE_ADDR + 512 * 1024 - 1, .flags = IORESOURCE_MEM, }; @@ -536,8 +519,8 @@ static struct mx3fb_platform_data mx3fb_pdata = { static struct resource pcm970_sja1000_resources[] = { { - .start = CS5_BASE_ADDR, - .end = CS5_BASE_ADDR + 0x100 - 1, + .start = MX31_CS5_BASE_ADDR, + .end = MX31_CS5_BASE_ADDR + 0x100 - 1, .flags = IORESOURCE_MEM, }, { .start = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)), @@ -561,16 +544,65 @@ static struct platform_device pcm970_sja1000 = { .num_resources = ARRAY_SIZE(pcm970_sja1000_resources), }; +static struct mxc_usbh_platform_data otg_pdata = { + .portsc = MXC_EHCI_MODE_ULPI, + .flags = MXC_EHCI_INTERFACE_DIFF_UNI, +}; + +static struct mxc_usbh_platform_data usbh2_pdata = { + .portsc = MXC_EHCI_MODE_ULPI, + .flags = MXC_EHCI_INTERFACE_DIFF_UNI, +}; + +static struct fsl_usb2_platform_data otg_device_pdata = { + .operating_mode = FSL_USB2_DR_DEVICE, + .phy_mode = FSL_USB2_PHY_ULPI, +}; + +static int otg_mode_host; + +static int __init pcm037_otg_mode(char *options) +{ + if (!strcmp(options, "host")) + otg_mode_host = 1; + else if (!strcmp(options, "device")) + otg_mode_host = 0; + else + pr_info("otg_mode neither \"host\" nor \"device\". " + "Defaulting to device\n"); + return 0; +} +__setup("otg_mode=", pcm037_otg_mode); + /* * Board specific initialization. */ static void __init mxc_board_init(void) { int ret; + u32 tmp; + + mxc_iomux_set_gpr(MUX_PGP_UH2, 1); mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins), "pcm037"); +#define H2_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS \ + | PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) + + mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, H2_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, H2_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, H2_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_STP, H2_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, H2_PAD_CFG); /* USBH2_DATA0 */ + mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, H2_PAD_CFG); /* USBH2_DATA1 */ + mxc_iomux_set_pad(MX31_PIN_SRXD6, H2_PAD_CFG); /* USBH2_DATA2 */ + mxc_iomux_set_pad(MX31_PIN_STXD6, H2_PAD_CFG); /* USBH2_DATA3 */ + mxc_iomux_set_pad(MX31_PIN_SFS3, H2_PAD_CFG); /* USBH2_DATA4 */ + mxc_iomux_set_pad(MX31_PIN_SCK3, H2_PAD_CFG); /* USBH2_DATA5 */ + mxc_iomux_set_pad(MX31_PIN_SRXD3, H2_PAD_CFG); /* USBH2_DATA6 */ + mxc_iomux_set_pad(MX31_PIN_STXD3, H2_PAD_CFG); /* USBH2_DATA7 */ + if (pcm037_variant() == PCM037_EET) mxc_iomux_setup_multiple_pins(pcm037_uart1_pins, ARRAY_SIZE(pcm037_uart1_pins), "pcm037_uart1"); @@ -608,8 +640,6 @@ static void __init mxc_board_init(void) mxc_register_device(&mxcsdhc_device0, &sdhc_pdata); mxc_register_device(&mx3_ipu, &mx3_ipu_data); mxc_register_device(&mx3_fb, &mx3fb_pdata); - if (!gpio_usbotg_hs_activate()) - mxc_register_device(&mxc_otg_udc_device, &usb_pdata); /* CSI */ /* Camera power: default - off */ @@ -623,6 +653,23 @@ static void __init mxc_board_init(void) mxc_register_device(&mx3_camera, &camera_pdata); platform_device_register(&pcm970_sja1000); + +#if defined(CONFIG_USB_ULPI) + if (otg_mode_host) { + otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, + USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT); + + mxc_register_device(&mxc_otg_host, &otg_pdata); + } + + usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, + USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT); + + mxc_register_device(&mxc_usbh2, &usbh2_pdata); +#endif + if (!otg_mode_host) + mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata); + } static void __init pcm037_timer_init(void) @@ -636,9 +683,9 @@ struct sys_timer pcm037_timer = { MACHINE_START(PCM037, "Phytec Phycore pcm037") /* Maintainer: Pengutronix */ - .phys_io = AIPS1_BASE_ADDR, - .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x100, + .phys_io = MX31_AIPS1_BASE_ADDR, + .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc, + .boot_params = MX3x_PHYS_OFFSET + 0x100, .map_io = mx31_map_io, .init_irq = mx31_init_irq, .init_machine = mxc_board_init, diff --git a/arch/arm/mach-mx3/pcm037_eet.c b/arch/arm/mach-mx3/mach-pcm037_eet.c index 8d386000fc4..8d386000fc4 100644 --- a/arch/arm/mach-mx3/pcm037_eet.c +++ b/arch/arm/mach-mx3/mach-pcm037_eet.c diff --git a/arch/arm/mach-mx3/pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c index e3aa829be58..1bf1ec2eef5 100644 --- a/arch/arm/mach-mx3/pcm043.c +++ b/arch/arm/mach-mx3/mach-pcm043.c @@ -26,8 +26,12 @@ #include <linux/gpio.h> #include <linux/smc911x.h> #include <linux/interrupt.h> +#include <linux/delay.h> #include <linux/i2c.h> #include <linux/i2c/at24.h> +#include <linux/usb/otg.h> +#include <linux/usb/ulpi.h> +#include <linux/fsl_devices.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -44,6 +48,10 @@ #include <mach/ipu.h> #include <mach/mx3fb.h> #include <mach/mxc_nand.h> +#include <mach/mxc_ehci.h> +#include <mach/ulpi.h> +#include <mach/audmux.h> +#include <mach/ssi.h> #include "devices.h" @@ -205,6 +213,94 @@ static struct pad_desc pcm043_pads[] = { MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS, /* gpio */ MX35_PAD_ATA_CS0__GPIO2_6, + /* USB host */ + MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR, + MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC, + /* SSI */ + MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS, + MX35_PAD_STXD4__AUDMUX_AUD4_TXD, + MX35_PAD_SRXD4__AUDMUX_AUD4_RXD, + MX35_PAD_SCK4__AUDMUX_AUD4_TXC, +}; + +#define AC97_GPIO_TXFS (1 * 32 + 31) +#define AC97_GPIO_TXD (1 * 32 + 28) +#define AC97_GPIO_RESET (1 * 32 + 0) + +static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97) +{ + struct pad_desc txfs_gpio = MX35_PAD_STXFS4__GPIO2_31; + struct pad_desc txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS; + int ret; + + ret = gpio_request(AC97_GPIO_TXFS, "SSI"); + if (ret) { + printk("failed to get GPIO_TXFS: %d\n", ret); + return; + } + + mxc_iomux_v3_setup_pad(&txfs_gpio); + + /* warm reset */ + gpio_direction_output(AC97_GPIO_TXFS, 1); + udelay(2); + gpio_set_value(AC97_GPIO_TXFS, 0); + + gpio_free(AC97_GPIO_TXFS); + mxc_iomux_v3_setup_pad(&txfs); +} + +static void pcm043_ac97_cold_reset(struct snd_ac97 *ac97) +{ + struct pad_desc txfs_gpio = MX35_PAD_STXFS4__GPIO2_31; + struct pad_desc txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS; + struct pad_desc txd_gpio = MX35_PAD_STXD4__GPIO2_28; + struct pad_desc txd = MX35_PAD_STXD4__AUDMUX_AUD4_TXD; + struct pad_desc reset_gpio = MX35_PAD_SD2_CMD__GPIO2_0; + int ret; + + ret = gpio_request(AC97_GPIO_TXFS, "SSI"); + if (ret) + goto err1; + + ret = gpio_request(AC97_GPIO_TXD, "SSI"); + if (ret) + goto err2; + + ret = gpio_request(AC97_GPIO_RESET, "SSI"); + if (ret) + goto err3; + + mxc_iomux_v3_setup_pad(&txfs_gpio); + mxc_iomux_v3_setup_pad(&txd_gpio); + mxc_iomux_v3_setup_pad(&reset_gpio); + + gpio_direction_output(AC97_GPIO_TXFS, 0); + gpio_direction_output(AC97_GPIO_TXD, 0); + + /* cold reset */ + gpio_direction_output(AC97_GPIO_RESET, 0); + udelay(10); + gpio_direction_output(AC97_GPIO_RESET, 1); + + mxc_iomux_v3_setup_pad(&txd); + mxc_iomux_v3_setup_pad(&txfs); + + gpio_free(AC97_GPIO_RESET); +err3: + gpio_free(AC97_GPIO_TXD); +err2: + gpio_free(AC97_GPIO_TXFS); +err1: + if (ret) + printk("%s failed with %d\n", __func__, ret); + mdelay(1); +} + +static struct imx_ssi_platform_data pcm043_ssi_pdata = { + .ac97_reset = pcm043_ac97_cold_reset, + .ac97_warm_reset = pcm043_ac97_warm_reset, + .flags = IMX_SSI_USE_AC97, }; static struct mxc_nand_platform_data pcm037_nand_board_info = { @@ -212,6 +308,37 @@ static struct mxc_nand_platform_data pcm037_nand_board_info = { .hw_ecc = 1, }; +static struct mxc_usbh_platform_data otg_pdata = { + .portsc = MXC_EHCI_MODE_UTMI, + .flags = MXC_EHCI_INTERFACE_DIFF_UNI, +}; + +static struct mxc_usbh_platform_data usbh1_pdata = { + .portsc = MXC_EHCI_MODE_SERIAL, + .flags = MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY | + MXC_EHCI_IPPUE_DOWN, +}; + +static struct fsl_usb2_platform_data otg_device_pdata = { + .operating_mode = FSL_USB2_DR_DEVICE, + .phy_mode = FSL_USB2_PHY_UTMI, +}; + +static int otg_mode_host; + +static int __init pcm043_otg_mode(char *options) +{ + if (!strcmp(options, "host")) + otg_mode_host = 1; + else if (!strcmp(options, "device")) + otg_mode_host = 0; + else + pr_info("otg_mode neither \"host\" nor \"device\". " + "Defaulting to device\n"); + return 0; +} +__setup("otg_mode=", pcm043_otg_mode); + /* * Board specific initialization. */ @@ -219,10 +346,23 @@ static void __init mxc_board_init(void) { mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads)); + mxc_audmux_v2_configure_port(3, + MXC_AUDMUX_V2_PTCR_SYN | /* 4wire mode */ + MXC_AUDMUX_V2_PTCR_TFSEL(0) | + MXC_AUDMUX_V2_PTCR_TFSDIR, + MXC_AUDMUX_V2_PDCR_RXDSEL(0)); + + mxc_audmux_v2_configure_port(0, + MXC_AUDMUX_V2_PTCR_SYN | /* 4wire mode */ + MXC_AUDMUX_V2_PTCR_TCSEL(3) | + MXC_AUDMUX_V2_PTCR_TCLKDIR, /* clock is output */ + MXC_AUDMUX_V2_PDCR_RXDSEL(3)); + platform_add_devices(devices, ARRAY_SIZE(devices)); mxc_register_device(&mxc_uart_device0, &uart_pdata); mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info); + mxc_register_device(&imx_ssi_device0, &pcm043_ssi_pdata); mxc_register_device(&mxc_uart_device1, &uart_pdata); @@ -235,6 +375,20 @@ static void __init mxc_board_init(void) mxc_register_device(&mx3_ipu, &mx3_ipu_data); mxc_register_device(&mx3_fb, &mx3fb_pdata); + +#if defined(CONFIG_USB_ULPI) + if (otg_mode_host) { + otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, + USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT); + + mxc_register_device(&mxc_otg_host, &otg_pdata); + } + + mxc_register_device(&mxc_usbh1, &usbh1_pdata); +#endif + if (!otg_mode_host) + mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata); + } static void __init pcm043_timer_init(void) @@ -248,9 +402,9 @@ struct sys_timer pcm043_timer = { MACHINE_START(PCM043, "Phytec Phycore pcm043") /* Maintainer: Pengutronix */ - .phys_io = AIPS1_BASE_ADDR, - .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x100, + .phys_io = MX35_AIPS1_BASE_ADDR, + .io_pg_offst = ((MX35_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = MX3x_PHYS_OFFSET + 0x100, .map_io = mx35_map_io, .init_irq = mx35_init_irq, .init_machine = mxc_board_init, diff --git a/arch/arm/mach-mx3/qong.c b/arch/arm/mach-mx3/mach-qong.c index 044511f1b9a..e5b5b8323a1 100644 --- a/arch/arm/mach-mx3/qong.c +++ b/arch/arm/mach-mx3/mach-qong.c @@ -43,7 +43,7 @@ #define QONG_FPGA_VERSION(major, minor, rev) \ (((major & 0xF) << 12) | ((minor & 0xF) << 8) | (rev & 0xFF)) -#define QONG_FPGA_BASEADDR CS1_BASE_ADDR +#define QONG_FPGA_BASEADDR MX31_CS1_BASE_ADDR #define QONG_FPGA_PERIPH_SIZE (1 << 24) #define QONG_FPGA_CTRL_BASEADDR QONG_FPGA_BASEADDR @@ -115,8 +115,8 @@ static struct physmap_flash_data qong_flash_data = { }; static struct resource qong_flash_resource = { - .start = CS0_BASE_ADDR, - .end = CS0_BASE_ADDR + QONG_NOR_SIZE - 1, + .start = MX31_CS0_BASE_ADDR, + .end = MX31_CS0_BASE_ADDR + QONG_NOR_SIZE - 1, .flags = IORESOURCE_MEM, }; @@ -180,8 +180,8 @@ static struct platform_nand_data qong_nand_data = { }; static struct resource qong_nand_resource = { - .start = CS3_BASE_ADDR, - .end = CS3_BASE_ADDR + SZ_32M - 1, + .start = MX31_CS3_BASE_ADDR, + .end = MX31_CS3_BASE_ADDR + SZ_32M - 1, .flags = IORESOURCE_MEM, }; @@ -198,9 +198,7 @@ static struct platform_device qong_nand_device = { static void __init qong_init_nand_mtd(void) { /* init CS */ - __raw_writel(0x00004f00, CSCR_U(3)); - __raw_writel(0x20013b31, CSCR_L(3)); - __raw_writel(0x00020800, CSCR_A(3)); + mx31_setup_weimcs(3, 0x00004f00, 0x20013b31, 0x00020800); mxc_iomux_set_gpr(MUX_SDCTL_CSD1_SEL, true); /* enable pin */ @@ -275,9 +273,9 @@ static struct sys_timer qong_timer = { MACHINE_START(QONG, "Dave/DENX QongEVB-LITE") /* Maintainer: DENX Software Engineering GmbH */ - .phys_io = AIPS1_BASE_ADDR, - .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x100, + .phys_io = MX31_AIPS1_BASE_ADDR, + .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc, + .boot_params = MX3x_PHYS_OFFSET + 0x100, .map_io = mx31_map_io, .init_irq = mx31_init_irq, .init_machine = mxc_board_init, diff --git a/arch/arm/mach-mx3/mx31lite-db.c b/arch/arm/mach-mx3/mx31lite-db.c index 694611d6b05..ccd874225c3 100644 --- a/arch/arm/mach-mx3/mx31lite-db.c +++ b/arch/arm/mach-mx3/mx31lite-db.c @@ -67,6 +67,13 @@ static unsigned int litekit_db_board_pins[] __initdata = { MX31_PIN_CSPI1_SS0__SS0, MX31_PIN_CSPI1_SS1__SS1, MX31_PIN_CSPI1_SS2__SS2, + /* SDHC1 */ + MX31_PIN_SD1_DATA0__SD1_DATA0, + MX31_PIN_SD1_DATA1__SD1_DATA1, + MX31_PIN_SD1_DATA2__SD1_DATA2, + MX31_PIN_SD1_DATA3__SD1_DATA3, + MX31_PIN_SD1_CLK__SD1_CLK, + MX31_PIN_SD1_CMD__SD1_CMD, }; /* UART */ @@ -79,11 +86,11 @@ static struct imxuart_platform_data uart_pdata __initdata = { static int gpio_det, gpio_wp; #define MMC_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ - PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) + PAD_CTL_ODE_CMOS) static int mxc_mmc1_get_ro(struct device *dev) { - return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_LCS0)); + return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_GPIO1_6)); } static int mxc_mmc1_init(struct device *dev, @@ -94,12 +101,17 @@ static int mxc_mmc1_init(struct device *dev, gpio_det = IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1); gpio_wp = IOMUX_TO_GPIO(MX31_PIN_GPIO1_6); - mxc_iomux_set_pad(MX31_PIN_SD1_DATA0, MMC_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_SD1_DATA1, MMC_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_SD1_DATA2, MMC_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_SD1_DATA3, MMC_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SD1_DATA0, + MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU); + mxc_iomux_set_pad(MX31_PIN_SD1_DATA1, + MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU); + mxc_iomux_set_pad(MX31_PIN_SD1_DATA2, + MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU); + mxc_iomux_set_pad(MX31_PIN_SD1_DATA3, + MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU); + mxc_iomux_set_pad(MX31_PIN_SD1_CMD, + MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU); mxc_iomux_set_pad(MX31_PIN_SD1_CLK, MMC_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_SD1_CMD, MMC_PAD_CFG); ret = gpio_request(gpio_det, "MMC detect"); if (ret) @@ -113,7 +125,7 @@ static int mxc_mmc1_init(struct device *dev, gpio_direction_input(gpio_wp); ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_DCD_DCE1), detect_irq, - IRQF_DISABLED | IRQF_TRIGGER_FALLING, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "MMC detect", data); if (ret) goto exit_free_wp; @@ -133,7 +145,7 @@ static void mxc_mmc1_exit(struct device *dev, void *data) { gpio_free(gpio_det); gpio_free(gpio_wp); - free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), data); + free_irq(IOMUX_TO_IRQ(MX31_PIN_DCD_DCE1), data); } static struct imxmmc_platform_data mmc_pdata = { diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c index 438428eaf76..9fbad2eb3a4 100644 --- a/arch/arm/mach-mx3/mx31moboard-devboard.c +++ b/arch/arm/mach-mx3/mx31moboard-devboard.c @@ -49,6 +49,9 @@ static unsigned int devboard_pins[] = { MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB, MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND, MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12, + /* SEL */ + MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9, + MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11, }; static struct imxuart_platform_data uart_pdata = { @@ -108,6 +111,33 @@ static struct imxmmc_platform_data sdhc2_pdata = { .exit = devboard_sdhc2_exit, }; +#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1) +#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1) +#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1) +#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1) + +static void devboard_init_sel_gpios(void) +{ + if (!gpio_request(SEL0, "sel0")) { + gpio_direction_input(SEL0); + gpio_export(SEL0, true); + } + + if (!gpio_request(SEL1, "sel1")) { + gpio_direction_input(SEL1); + gpio_export(SEL1, true); + } + + if (!gpio_request(SEL2, "sel2")) { + gpio_direction_input(SEL2); + gpio_export(SEL2, true); + } + + if (!gpio_request(SEL3, "sel3")) { + gpio_direction_input(SEL3); + gpio_export(SEL3, true); + } +} #define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) @@ -196,5 +226,7 @@ void __init mx31moboard_devboard_init(void) mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata); + devboard_init_sel_gpios(); + devboard_usbh1_init(); } diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c index 1f44b9ccbb0..3958515d75b 100644 --- a/arch/arm/mach-mx3/mx31moboard-marxbot.c +++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c @@ -66,6 +66,9 @@ static unsigned int marxbot_pins[] = { MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB, MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND, MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12, + /* SEL */ + MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9, + MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11, }; #define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR) @@ -127,12 +130,12 @@ static struct imxmmc_platform_data sdhc2_pdata = { static void dspics_resets_init(void) { if (!gpio_request(TRSLAT_RST_B, "translator-rst")) { - gpio_direction_output(TRSLAT_RST_B, 1); + gpio_direction_output(TRSLAT_RST_B, 0); gpio_export(TRSLAT_RST_B, false); } if (!gpio_request(DSPICS_RST_B, "dspics-rst")) { - gpio_direction_output(DSPICS_RST_B, 1); + gpio_direction_output(DSPICS_RST_B, 0); gpio_export(DSPICS_RST_B, false); } } @@ -200,7 +203,7 @@ static int __init marxbot_cam_init(void) int ret = gpio_request(CAM_CHOICE, "cam-choice"); if (ret) return ret; - gpio_direction_output(CAM_CHOICE, 1); + gpio_direction_output(CAM_CHOICE, 0); ret = gpio_request(BASECAM_RST_B, "basecam-reset"); if (ret) @@ -223,6 +226,34 @@ static int __init marxbot_cam_init(void) return 0; } +#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1) +#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1) +#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1) +#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1) + +static void marxbot_init_sel_gpios(void) +{ + if (!gpio_request(SEL0, "sel0")) { + gpio_direction_input(SEL0); + gpio_export(SEL0, true); + } + + if (!gpio_request(SEL1, "sel1")) { + gpio_direction_input(SEL1); + gpio_export(SEL1, true); + } + + if (!gpio_request(SEL2, "sel2")) { + gpio_direction_input(SEL2); + gpio_export(SEL2, true); + } + + if (!gpio_request(SEL3, "sel3")) { + gpio_direction_input(SEL3); + gpio_export(SEL3, true); + } +} + #define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) @@ -307,6 +338,8 @@ void __init mx31moboard_marxbot_init(void) mxc_iomux_setup_multiple_pins(marxbot_pins, ARRAY_SIZE(marxbot_pins), "marxbot"); + marxbot_init_sel_gpios(); + dspics_resets_init(); mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata); diff --git a/arch/arm/mach-mx3/mx31moboard-smartbot.c b/arch/arm/mach-mx3/mx31moboard-smartbot.c new file mode 100644 index 00000000000..52a69fc8b14 --- /dev/null +++ b/arch/arm/mach-mx3/mx31moboard-smartbot.c @@ -0,0 +1,162 @@ +/* + * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <linux/types.h> + +#include <mach/common.h> +#include <mach/hardware.h> +#include <mach/imx-uart.h> +#include <mach/iomux-mx3.h> + +#include <media/soc_camera.h> + +#include "devices.h" + +static unsigned int smartbot_pins[] = { + /* UART1 */ + MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2, + MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2, + /* CSI */ + MX31_PIN_CSI_D4__CSI_D4, MX31_PIN_CSI_D5__CSI_D5, + MX31_PIN_CSI_D6__CSI_D6, MX31_PIN_CSI_D7__CSI_D7, + MX31_PIN_CSI_D8__CSI_D8, MX31_PIN_CSI_D9__CSI_D9, + MX31_PIN_CSI_D10__CSI_D10, MX31_PIN_CSI_D11__CSI_D11, + MX31_PIN_CSI_D12__CSI_D12, MX31_PIN_CSI_D13__CSI_D13, + MX31_PIN_CSI_D14__CSI_D14, MX31_PIN_CSI_D15__CSI_D15, + MX31_PIN_CSI_HSYNC__CSI_HSYNC, MX31_PIN_CSI_MCLK__CSI_MCLK, + MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC, + MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1, + /* ENABLES */ + MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9, + MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11, +}; + +static struct imxuart_platform_data uart_pdata = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +#define CAM_POWER IOMUX_TO_GPIO(MX31_PIN_GPIO3_1) +#define CAM_RST_B IOMUX_TO_GPIO(MX31_PIN_GPIO3_0) + +static int smartbot_cam_power(struct device *dev, int on) +{ + gpio_set_value(CAM_POWER, !on); + return 0; +} + +static int smartbot_cam_reset(struct device *dev) +{ + gpio_set_value(CAM_RST_B, 0); + udelay(100); + gpio_set_value(CAM_RST_B, 1); + return 0; +} + +static struct i2c_board_info smartbot_i2c_devices[] = { + { + I2C_BOARD_INFO("mt9t031", 0x5d), + }, +}; + +static struct soc_camera_link base_iclink = { + .bus_id = 0, /* Must match with the camera ID */ + .power = smartbot_cam_power, + .reset = smartbot_cam_reset, + .board_info = &smartbot_i2c_devices[0], + .i2c_adapter_id = 0, + .module_name = "mt9t031", +}; + +static struct platform_device smartbot_camera[] = { + { + .name = "soc-camera-pdrv", + .id = 0, + .dev = { + .platform_data = &base_iclink, + }, + }, +}; + +static struct platform_device *smartbot_cameras[] __initdata = { + &smartbot_camera[0], +}; + +static int __init smartbot_cam_init(void) +{ + int ret = gpio_request(CAM_RST_B, "cam-reset"); + if (ret) + return ret; + gpio_direction_output(CAM_RST_B, 1); + ret = gpio_request(CAM_POWER, "cam-standby"); + if (ret) + return ret; + gpio_direction_output(CAM_POWER, 0); + + return 0; +} + +#define POWER_EN IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1) +#define DSPIC_RST_B IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1) +#define TRSLAT_RST_B IOMUX_TO_GPIO(MX31_PIN_RI_DCE1) +#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1) + +static void smartbot_resets_init(void) +{ + if (!gpio_request(POWER_EN, "power-enable")) { + gpio_direction_output(POWER_EN, 0); + gpio_export(POWER_EN, false); + } + + if (!gpio_request(DSPIC_RST_B, "dspic-rst")) { + gpio_direction_output(DSPIC_RST_B, 0); + gpio_export(DSPIC_RST_B, false); + } + + if (!gpio_request(TRSLAT_RST_B, "translator-rst")) { + gpio_direction_output(TRSLAT_RST_B, 0); + gpio_export(TRSLAT_RST_B, false); + } + + if (!gpio_request(SEL3, "sel3")) { + gpio_direction_input(SEL3); + gpio_export(SEL3, true); + } +} +/* + * system init for baseboard usage. Will be called by mx31moboard init. + */ +void __init mx31moboard_smartbot_init(void) +{ + printk(KERN_INFO "Initializing mx31smartbot peripherals\n"); + + mxc_iomux_setup_multiple_pins(smartbot_pins, ARRAY_SIZE(smartbot_pins), + "smartbot"); + + mxc_register_device(&mxc_uart_device1, &uart_pdata); + + smartbot_resets_init(); + + smartbot_cam_init(); + platform_add_devices(smartbot_cameras, ARRAY_SIZE(smartbot_cameras)); +} diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig new file mode 100644 index 00000000000..1576d51e676 --- /dev/null +++ b/arch/arm/mach-mx5/Kconfig @@ -0,0 +1,18 @@ +if ARCH_MX5 + +config ARCH_MX51 + bool + default y + select MXC_TZIC + select ARCH_MXC_IOMUX_V3 + +comment "MX5 platforms:" + +config MACH_MX51_BABBAGE + bool "Support MX51 BABBAGE platforms" + help + Include support for MX51 Babbage platform, also known as MX51EVK in + u-boot. This includes specific configurations for the board and its + peripherals. + +endif diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile new file mode 100644 index 00000000000..bf23f869ef5 --- /dev/null +++ b/arch/arm/mach-mx5/Makefile @@ -0,0 +1,9 @@ +# +# Makefile for the linux kernel. +# + +# Object file lists. +obj-y := cpu.o mm.o clock-mx51.o devices.o + +obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o + diff --git a/arch/arm/mach-mx5/Makefile.boot b/arch/arm/mach-mx5/Makefile.boot new file mode 100644 index 00000000000..9939a19d99a --- /dev/null +++ b/arch/arm/mach-mx5/Makefile.boot @@ -0,0 +1,3 @@ + zreladdr-y := 0x90008000 +params_phys-y := 0x90000100 +initrd_phys-y := 0x90800000 diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c new file mode 100644 index 00000000000..ee67a71db80 --- /dev/null +++ b/arch/arm/mach-mx5/board-mx51_babbage.c @@ -0,0 +1,98 @@ +/* + * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <mach/common.h> +#include <mach/hardware.h> +#include <mach/imx-uart.h> +#include <mach/iomux-mx51.h> + +#include <asm/irq.h> +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> + +#include "devices.h" + +static struct platform_device *devices[] __initdata = { + &mxc_fec_device, +}; + +static struct pad_desc mx51babbage_pads[] = { + /* UART1 */ + MX51_PAD_UART1_RXD__UART1_RXD, + MX51_PAD_UART1_TXD__UART1_TXD, + MX51_PAD_UART1_RTS__UART1_RTS, + MX51_PAD_UART1_CTS__UART1_CTS, + + /* UART2 */ + MX51_PAD_UART2_RXD__UART2_RXD, + MX51_PAD_UART2_TXD__UART2_TXD, + + /* UART3 */ + MX51_PAD_EIM_D25__UART3_RXD, + MX51_PAD_EIM_D26__UART3_TXD, + MX51_PAD_EIM_D27__UART3_RTS, + MX51_PAD_EIM_D24__UART3_CTS, +}; + +/* Serial ports */ +#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE) +static struct imxuart_platform_data uart_pdata = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static inline void mxc_init_imx_uart(void) +{ + mxc_register_device(&mxc_uart_device0, &uart_pdata); + mxc_register_device(&mxc_uart_device1, &uart_pdata); + mxc_register_device(&mxc_uart_device2, &uart_pdata); +} +#else /* !SERIAL_IMX */ +static inline void mxc_init_imx_uart(void) +{ +} +#endif /* SERIAL_IMX */ + +/* + * Board specific initialization. + */ +static void __init mxc_board_init(void) +{ + mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads, + ARRAY_SIZE(mx51babbage_pads)); + mxc_init_imx_uart(); + platform_add_devices(devices, ARRAY_SIZE(devices)); +} + +static void __init mx51_babbage_timer_init(void) +{ + mx51_clocks_init(32768, 24000000, 22579200, 0); +} + +static struct sys_timer mxc_timer = { + .init = mx51_babbage_timer_init, +}; + +MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board") + /* Maintainer: Amit Kucheria <amit.kucheria@canonical.com> */ + .phys_io = MX51_AIPS1_BASE_ADDR, + .io_pg_offst = ((MX51_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x100, + .map_io = mx51_map_io, + .init_irq = mx51_init_irq, + .init_machine = mxc_board_init, + .timer = &mxc_timer, +MACHINE_END diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51.c new file mode 100644 index 00000000000..be90c03101c --- /dev/null +++ b/arch/arm/mach-mx5/clock-mx51.c @@ -0,0 +1,825 @@ +/* + * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/mm.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/io.h> + +#include <asm/clkdev.h> + +#include <mach/hardware.h> +#include <mach/common.h> +#include <mach/clock.h> + +#include "crm_regs.h" + +/* External clock values passed-in by the board code */ +static unsigned long external_high_reference, external_low_reference; +static unsigned long oscillator_reference, ckih2_reference; + +static struct clk osc_clk; +static struct clk pll1_main_clk; +static struct clk pll1_sw_clk; +static struct clk pll2_sw_clk; +static struct clk pll3_sw_clk; +static struct clk lp_apm_clk; +static struct clk periph_apm_clk; +static struct clk ahb_clk; +static struct clk ipg_clk; + +#define MAX_DPLL_WAIT_TRIES 1000 /* 1000 * udelay(1) = 1ms */ + +static int _clk_ccgr_enable(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(clk->enable_reg); + reg |= MXC_CCM_CCGRx_MOD_ON << clk->enable_shift; + __raw_writel(reg, clk->enable_reg); + + return 0; +} + +static void _clk_ccgr_disable(struct clk *clk) +{ + u32 reg; + reg = __raw_readl(clk->enable_reg); + reg &= ~(MXC_CCM_CCGRx_MOD_OFF << clk->enable_shift); + __raw_writel(reg, clk->enable_reg); + +} + +static void _clk_ccgr_disable_inwait(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(clk->enable_reg); + reg &= ~(MXC_CCM_CCGRx_CG_MASK << clk->enable_shift); + reg |= MXC_CCM_CCGRx_MOD_IDLE << clk->enable_shift; + __raw_writel(reg, clk->enable_reg); +} + +/* + * For the 4-to-1 muxed input clock + */ +static inline u32 _get_mux(struct clk *parent, struct clk *m0, + struct clk *m1, struct clk *m2, struct clk *m3) +{ + if (parent == m0) + return 0; + else if (parent == m1) + return 1; + else if (parent == m2) + return 2; + else if (parent == m3) + return 3; + else + BUG(); + + return -EINVAL; +} + +static inline void __iomem *_get_pll_base(struct clk *pll) +{ + if (pll == &pll1_main_clk) + return MX51_DPLL1_BASE; + else if (pll == &pll2_sw_clk) + return MX51_DPLL2_BASE; + else if (pll == &pll3_sw_clk) + return MX51_DPLL3_BASE; + else + BUG(); + + return NULL; +} + +static unsigned long clk_pll_get_rate(struct clk *clk) +{ + long mfi, mfn, mfd, pdf, ref_clk, mfn_abs; + unsigned long dp_op, dp_mfd, dp_mfn, dp_ctl, pll_hfsm, dbl; + void __iomem *pllbase; + s64 temp; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + pllbase = _get_pll_base(clk); + + dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL); + pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM; + dbl = dp_ctl & MXC_PLL_DP_CTL_DPDCK0_2_EN; + + if (pll_hfsm == 0) { + dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP); + dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD); + dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN); + } else { + dp_op = __raw_readl(pllbase + MXC_PLL_DP_HFS_OP); + dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFD); + dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFN); + } + pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK; + mfi = (dp_op & MXC_PLL_DP_OP_MFI_MASK) >> MXC_PLL_DP_OP_MFI_OFFSET; + mfi = (mfi <= 5) ? 5 : mfi; + mfd = dp_mfd & MXC_PLL_DP_MFD_MASK; + mfn = mfn_abs = dp_mfn & MXC_PLL_DP_MFN_MASK; + /* Sign extend to 32-bits */ + if (mfn >= 0x04000000) { + mfn |= 0xFC000000; + mfn_abs = -mfn; + } + + ref_clk = 2 * parent_rate; + if (dbl != 0) + ref_clk *= 2; + + ref_clk /= (pdf + 1); + temp = (u64) ref_clk * mfn_abs; + do_div(temp, mfd + 1); + if (mfn < 0) + temp = -temp; + temp = (ref_clk * mfi) + temp; + + return temp; +} + +static int _clk_pll_set_rate(struct clk *clk, unsigned long rate) +{ + u32 reg; + void __iomem *pllbase; + + long mfi, pdf, mfn, mfd = 999999; + s64 temp64; + unsigned long quad_parent_rate; + unsigned long pll_hfsm, dp_ctl; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + pllbase = _get_pll_base(clk); + + quad_parent_rate = 4 * parent_rate; + pdf = mfi = -1; + while (++pdf < 16 && mfi < 5) + mfi = rate * (pdf+1) / quad_parent_rate; + if (mfi > 15) + return -EINVAL; + pdf--; + + temp64 = rate * (pdf+1) - quad_parent_rate * mfi; + do_div(temp64, quad_parent_rate/1000000); + mfn = (long)temp64; + + dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL); + /* use dpdck0_2 */ + __raw_writel(dp_ctl | 0x1000L, pllbase + MXC_PLL_DP_CTL); + pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM; + if (pll_hfsm == 0) { + reg = mfi << 4 | pdf; + __raw_writel(reg, pllbase + MXC_PLL_DP_OP); + __raw_writel(mfd, pllbase + MXC_PLL_DP_MFD); + __raw_writel(mfn, pllbase + MXC_PLL_DP_MFN); + } else { + reg = mfi << 4 | pdf; + __raw_writel(reg, pllbase + MXC_PLL_DP_HFS_OP); + __raw_writel(mfd, pllbase + MXC_PLL_DP_HFS_MFD); + __raw_writel(mfn, pllbase + MXC_PLL_DP_HFS_MFN); + } + + return 0; +} + +static int _clk_pll_enable(struct clk *clk) +{ + u32 reg; + void __iomem *pllbase; + int i = 0; + + pllbase = _get_pll_base(clk); + reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) | MXC_PLL_DP_CTL_UPEN; + __raw_writel(reg, pllbase + MXC_PLL_DP_CTL); + + /* Wait for lock */ + do { + reg = __raw_readl(pllbase + MXC_PLL_DP_CTL); + if (reg & MXC_PLL_DP_CTL_LRF) + break; + + udelay(1); + } while (++i < MAX_DPLL_WAIT_TRIES); + + if (i == MAX_DPLL_WAIT_TRIES) { + pr_err("MX5: pll locking failed\n"); + return -EINVAL; + } + + return 0; +} + +static void _clk_pll_disable(struct clk *clk) +{ + u32 reg; + void __iomem *pllbase; + + pllbase = _get_pll_base(clk); + reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) & ~MXC_PLL_DP_CTL_UPEN; + __raw_writel(reg, pllbase + MXC_PLL_DP_CTL); +} + +static int _clk_pll1_sw_set_parent(struct clk *clk, struct clk *parent) +{ + u32 reg, step; + + reg = __raw_readl(MXC_CCM_CCSR); + + /* When switching from pll_main_clk to a bypass clock, first select a + * multiplexed clock in 'step_sel', then shift the glitchless mux + * 'pll1_sw_clk_sel'. + * + * When switching back, do it in reverse order + */ + if (parent == &pll1_main_clk) { + /* Switch to pll1_main_clk */ + reg &= ~MXC_CCM_CCSR_PLL1_SW_CLK_SEL; + __raw_writel(reg, MXC_CCM_CCSR); + /* step_clk mux switched to lp_apm, to save power. */ + reg = __raw_readl(MXC_CCM_CCSR); + reg &= ~MXC_CCM_CCSR_STEP_SEL_MASK; + reg |= (MXC_CCM_CCSR_STEP_SEL_LP_APM << + MXC_CCM_CCSR_STEP_SEL_OFFSET); + } else { + if (parent == &lp_apm_clk) { + step = MXC_CCM_CCSR_STEP_SEL_LP_APM; + } else if (parent == &pll2_sw_clk) { + step = MXC_CCM_CCSR_STEP_SEL_PLL2_DIVIDED; + } else if (parent == &pll3_sw_clk) { + step = MXC_CCM_CCSR_STEP_SEL_PLL3_DIVIDED; + } else + return -EINVAL; + + reg &= ~MXC_CCM_CCSR_STEP_SEL_MASK; + reg |= (step << MXC_CCM_CCSR_STEP_SEL_OFFSET); + + __raw_writel(reg, MXC_CCM_CCSR); + /* Switch to step_clk */ + reg = __raw_readl(MXC_CCM_CCSR); + reg |= MXC_CCM_CCSR_PLL1_SW_CLK_SEL; + } + __raw_writel(reg, MXC_CCM_CCSR); + return 0; +} + +static unsigned long clk_pll1_sw_get_rate(struct clk *clk) +{ + u32 reg, div; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + reg = __raw_readl(MXC_CCM_CCSR); + + if (clk->parent == &pll2_sw_clk) { + div = ((reg & MXC_CCM_CCSR_PLL2_PODF_MASK) >> + MXC_CCM_CCSR_PLL2_PODF_OFFSET) + 1; + } else if (clk->parent == &pll3_sw_clk) { + div = ((reg & MXC_CCM_CCSR_PLL3_PODF_MASK) >> + MXC_CCM_CCSR_PLL3_PODF_OFFSET) + 1; + } else + div = 1; + return parent_rate / div; +} + +static int _clk_pll2_sw_set_parent(struct clk *clk, struct clk *parent) +{ + u32 reg; + + reg = __raw_readl(MXC_CCM_CCSR); + + if (parent == &pll2_sw_clk) + reg &= ~MXC_CCM_CCSR_PLL2_SW_CLK_SEL; + else + reg |= MXC_CCM_CCSR_PLL2_SW_CLK_SEL; + + __raw_writel(reg, MXC_CCM_CCSR); + return 0; +} + +static int _clk_lp_apm_set_parent(struct clk *clk, struct clk *parent) +{ + u32 reg; + + if (parent == &osc_clk) + reg = __raw_readl(MXC_CCM_CCSR) & ~MXC_CCM_CCSR_LP_APM_SEL; + else + return -EINVAL; + + __raw_writel(reg, MXC_CCM_CCSR); + + return 0; +} + +static unsigned long clk_arm_get_rate(struct clk *clk) +{ + u32 cacrr, div; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + cacrr = __raw_readl(MXC_CCM_CACRR); + div = (cacrr & MXC_CCM_CACRR_ARM_PODF_MASK) + 1; + + return parent_rate / div; +} + +static int _clk_periph_apm_set_parent(struct clk *clk, struct clk *parent) +{ + u32 reg, mux; + int i = 0; + + mux = _get_mux(parent, &pll1_sw_clk, &pll3_sw_clk, &lp_apm_clk, NULL); + + reg = __raw_readl(MXC_CCM_CBCMR) & ~MXC_CCM_CBCMR_PERIPH_CLK_SEL_MASK; + reg |= mux << MXC_CCM_CBCMR_PERIPH_CLK_SEL_OFFSET; + __raw_writel(reg, MXC_CCM_CBCMR); + + /* Wait for lock */ + do { + reg = __raw_readl(MXC_CCM_CDHIPR); + if (!(reg & MXC_CCM_CDHIPR_PERIPH_CLK_SEL_BUSY)) + break; + + udelay(1); + } while (++i < MAX_DPLL_WAIT_TRIES); + + if (i == MAX_DPLL_WAIT_TRIES) { + pr_err("MX5: Set parent for periph_apm clock failed\n"); + return -EINVAL; + } + + return 0; +} + +static int _clk_main_bus_set_parent(struct clk *clk, struct clk *parent) +{ + u32 reg; + + reg = __raw_readl(MXC_CCM_CBCDR); + + if (parent == &pll2_sw_clk) + reg &= ~MXC_CCM_CBCDR_PERIPH_CLK_SEL; + else if (parent == &periph_apm_clk) + reg |= MXC_CCM_CBCDR_PERIPH_CLK_SEL; + else + return -EINVAL; + + __raw_writel(reg, MXC_CCM_CBCDR); + + return 0; +} + +static struct clk main_bus_clk = { + .parent = &pll2_sw_clk, + .set_parent = _clk_main_bus_set_parent, +}; + +static unsigned long clk_ahb_get_rate(struct clk *clk) +{ + u32 reg, div; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + reg = __raw_readl(MXC_CCM_CBCDR); + div = ((reg & MXC_CCM_CBCDR_AHB_PODF_MASK) >> + MXC_CCM_CBCDR_AHB_PODF_OFFSET) + 1; + return parent_rate / div; +} + + +static int _clk_ahb_set_rate(struct clk *clk, unsigned long rate) +{ + u32 reg, div; + unsigned long parent_rate; + int i = 0; + + parent_rate = clk_get_rate(clk->parent); + + div = parent_rate / rate; + if (div > 8 || div < 1 || ((parent_rate / div) != rate)) + return -EINVAL; + + reg = __raw_readl(MXC_CCM_CBCDR); + reg &= ~MXC_CCM_CBCDR_AHB_PODF_MASK; + reg |= (div - 1) << MXC_CCM_CBCDR_AHB_PODF_OFFSET; + __raw_writel(reg, MXC_CCM_CBCDR); + + /* Wait for lock */ + do { + reg = __raw_readl(MXC_CCM_CDHIPR); + if (!(reg & MXC_CCM_CDHIPR_AHB_PODF_BUSY)) + break; + + udelay(1); + } while (++i < MAX_DPLL_WAIT_TRIES); + + if (i == MAX_DPLL_WAIT_TRIES) { + pr_err("MX5: clk_ahb_set_rate failed\n"); + return -EINVAL; + } + + return 0; +} + +static unsigned long _clk_ahb_round_rate(struct clk *clk, + unsigned long rate) +{ + u32 div; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + div = parent_rate / rate; + if (div > 8) + div = 8; + else if (div == 0) + div++; + return parent_rate / div; +} + + +static int _clk_max_enable(struct clk *clk) +{ + u32 reg; + + _clk_ccgr_enable(clk); + + /* Handshake with MAX when LPM is entered. */ + reg = __raw_readl(MXC_CCM_CLPCR); + reg &= ~MXC_CCM_CLPCR_BYPASS_MAX_LPM_HS; + __raw_writel(reg, MXC_CCM_CLPCR); + + return 0; +} + +static void _clk_max_disable(struct clk *clk) +{ + u32 reg; + + _clk_ccgr_disable_inwait(clk); + + /* No Handshake with MAX when LPM is entered as its disabled. */ + reg = __raw_readl(MXC_CCM_CLPCR); + reg |= MXC_CCM_CLPCR_BYPASS_MAX_LPM_HS; + __raw_writel(reg, MXC_CCM_CLPCR); +} + +static unsigned long clk_ipg_get_rate(struct clk *clk) +{ + u32 reg, div; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + reg = __raw_readl(MXC_CCM_CBCDR); + div = ((reg & MXC_CCM_CBCDR_IPG_PODF_MASK) >> + MXC_CCM_CBCDR_IPG_PODF_OFFSET) + 1; + + return parent_rate / div; +} + +static unsigned long clk_ipg_per_get_rate(struct clk *clk) +{ + u32 reg, prediv1, prediv2, podf; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + if (clk->parent == &main_bus_clk || clk->parent == &lp_apm_clk) { + /* the main_bus_clk is the one before the DVFS engine */ + reg = __raw_readl(MXC_CCM_CBCDR); + prediv1 = ((reg & MXC_CCM_CBCDR_PERCLK_PRED1_MASK) >> + MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET) + 1; + prediv2 = ((reg & MXC_CCM_CBCDR_PERCLK_PRED2_MASK) >> + MXC_CCM_CBCDR_PERCLK_PRED2_OFFSET) + 1; + podf = ((reg & MXC_CCM_CBCDR_PERCLK_PODF_MASK) >> + MXC_CCM_CBCDR_PERCLK_PODF_OFFSET) + 1; + return parent_rate / (prediv1 * prediv2 * podf); + } else if (clk->parent == &ipg_clk) + return parent_rate; + else + BUG(); +} + +static int _clk_ipg_per_set_parent(struct clk *clk, struct clk *parent) +{ + u32 reg; + + reg = __raw_readl(MXC_CCM_CBCMR); + + reg &= ~MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL; + reg &= ~MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL; + + if (parent == &ipg_clk) + reg |= MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL; + else if (parent == &lp_apm_clk) + reg |= MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL; + else if (parent != &main_bus_clk) + return -EINVAL; + + __raw_writel(reg, MXC_CCM_CBCMR); + + return 0; +} + +static unsigned long clk_uart_get_rate(struct clk *clk) +{ + u32 reg, prediv, podf; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + reg = __raw_readl(MXC_CCM_CSCDR1); + prediv = ((reg & MXC_CCM_CSCDR1_UART_CLK_PRED_MASK) >> + MXC_CCM_CSCDR1_UART_CLK_PRED_OFFSET) + 1; + podf = ((reg & MXC_CCM_CSCDR1_UART_CLK_PODF_MASK) >> + MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET) + 1; + + return parent_rate / (prediv * podf); +} + +static int _clk_uart_set_parent(struct clk *clk, struct clk *parent) +{ + u32 reg, mux; + + mux = _get_mux(parent, &pll1_sw_clk, &pll2_sw_clk, &pll3_sw_clk, + &lp_apm_clk); + reg = __raw_readl(MXC_CCM_CSCMR1) & ~MXC_CCM_CSCMR1_UART_CLK_SEL_MASK; + reg |= mux << MXC_CCM_CSCMR1_UART_CLK_SEL_OFFSET; + __raw_writel(reg, MXC_CCM_CSCMR1); + + return 0; +} + +static unsigned long get_high_reference_clock_rate(struct clk *clk) +{ + return external_high_reference; +} + +static unsigned long get_low_reference_clock_rate(struct clk *clk) +{ + return external_low_reference; +} + +static unsigned long get_oscillator_reference_clock_rate(struct clk *clk) +{ + return oscillator_reference; +} + +static unsigned long get_ckih2_reference_clock_rate(struct clk *clk) +{ + return ckih2_reference; +} + +/* External high frequency clock */ +static struct clk ckih_clk = { + .get_rate = get_high_reference_clock_rate, +}; + +static struct clk ckih2_clk = { + .get_rate = get_ckih2_reference_clock_rate, +}; + +static struct clk osc_clk = { + .get_rate = get_oscillator_reference_clock_rate, +}; + +/* External low frequency (32kHz) clock */ +static struct clk ckil_clk = { + .get_rate = get_low_reference_clock_rate, +}; + +static struct clk pll1_main_clk = { + .parent = &osc_clk, + .get_rate = clk_pll_get_rate, + .enable = _clk_pll_enable, + .disable = _clk_pll_disable, +}; + +/* Clock tree block diagram (WIP): + * CCM: Clock Controller Module + * + * PLL output -> | + * | CCM Switcher -> CCM_CLK_ROOT_GEN -> + * PLL bypass -> | + * + */ + +/* PLL1 SW supplies to ARM core */ +static struct clk pll1_sw_clk = { + .parent = &pll1_main_clk, + .set_parent = _clk_pll1_sw_set_parent, + .get_rate = clk_pll1_sw_get_rate, +}; + +/* PLL2 SW supplies to AXI/AHB/IP buses */ +static struct clk pll2_sw_clk = { + .parent = &osc_clk, + .get_rate = clk_pll_get_rate, + .set_rate = _clk_pll_set_rate, + .set_parent = _clk_pll2_sw_set_parent, + .enable = _clk_pll_enable, + .disable = _clk_pll_disable, +}; + +/* PLL3 SW supplies to serial clocks like USB, SSI, etc. */ +static struct clk pll3_sw_clk = { + .parent = &osc_clk, + .set_rate = _clk_pll_set_rate, + .get_rate = clk_pll_get_rate, + .enable = _clk_pll_enable, + .disable = _clk_pll_disable, +}; + +/* Low-power Audio Playback Mode clock */ +static struct clk lp_apm_clk = { + .parent = &osc_clk, + .set_parent = _clk_lp_apm_set_parent, +}; + +static struct clk periph_apm_clk = { + .parent = &pll1_sw_clk, + .set_parent = _clk_periph_apm_set_parent, +}; + +static struct clk cpu_clk = { + .parent = &pll1_sw_clk, + .get_rate = clk_arm_get_rate, +}; + +static struct clk ahb_clk = { + .parent = &main_bus_clk, + .get_rate = clk_ahb_get_rate, + .set_rate = _clk_ahb_set_rate, + .round_rate = _clk_ahb_round_rate, +}; + +/* Main IP interface clock for access to registers */ +static struct clk ipg_clk = { + .parent = &ahb_clk, + .get_rate = clk_ipg_get_rate, +}; + +static struct clk ipg_perclk = { + .parent = &lp_apm_clk, + .get_rate = clk_ipg_per_get_rate, + .set_parent = _clk_ipg_per_set_parent, +}; + +static struct clk uart_root_clk = { + .parent = &pll2_sw_clk, + .get_rate = clk_uart_get_rate, + .set_parent = _clk_uart_set_parent, +}; + +static struct clk ahb_max_clk = { + .parent = &ahb_clk, + .enable_reg = MXC_CCM_CCGR0, + .enable_shift = MXC_CCM_CCGRx_CG14_OFFSET, + .enable = _clk_max_enable, + .disable = _clk_max_disable, +}; + +static struct clk aips_tz1_clk = { + .parent = &ahb_clk, + .secondary = &ahb_max_clk, + .enable_reg = MXC_CCM_CCGR0, + .enable_shift = MXC_CCM_CCGRx_CG12_OFFSET, + .enable = _clk_ccgr_enable, + .disable = _clk_ccgr_disable_inwait, +}; + +static struct clk aips_tz2_clk = { + .parent = &ahb_clk, + .secondary = &ahb_max_clk, + .enable_reg = MXC_CCM_CCGR0, + .enable_shift = MXC_CCM_CCGRx_CG13_OFFSET, + .enable = _clk_ccgr_enable, + .disable = _clk_ccgr_disable_inwait, +}; + +static struct clk gpt_32k_clk = { + .id = 0, + .parent = &ckil_clk, +}; + +#define DEFINE_CLOCK(name, i, er, es, gr, sr, p, s) \ + static struct clk name = { \ + .id = i, \ + .enable_reg = er, \ + .enable_shift = es, \ + .get_rate = gr, \ + .set_rate = sr, \ + .enable = _clk_ccgr_enable, \ + .disable = _clk_ccgr_disable, \ + .parent = p, \ + .secondary = s, \ + } + +/* DEFINE_CLOCK(name, id, enable_reg, enable_shift, + get_rate, set_rate, parent, secondary); */ + +/* Shared peripheral bus arbiter */ +DEFINE_CLOCK(spba_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG0_OFFSET, + NULL, NULL, &ipg_clk, NULL); + +/* UART */ +DEFINE_CLOCK(uart1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG4_OFFSET, + NULL, NULL, &uart_root_clk, NULL); +DEFINE_CLOCK(uart2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG6_OFFSET, + NULL, NULL, &uart_root_clk, NULL); +DEFINE_CLOCK(uart3_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG8_OFFSET, + NULL, NULL, &uart_root_clk, NULL); +DEFINE_CLOCK(uart1_ipg_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG3_OFFSET, + NULL, NULL, &ipg_clk, &aips_tz1_clk); +DEFINE_CLOCK(uart2_ipg_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG5_OFFSET, + NULL, NULL, &ipg_clk, &aips_tz1_clk); +DEFINE_CLOCK(uart3_ipg_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG7_OFFSET, + NULL, NULL, &ipg_clk, &spba_clk); + +/* GPT */ +DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET, + NULL, NULL, &ipg_perclk, NULL); +DEFINE_CLOCK(gpt_ipg_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG10_OFFSET, + NULL, NULL, &ipg_clk, NULL); + +/* FEC */ +DEFINE_CLOCK(fec_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG12_OFFSET, + NULL, NULL, &ipg_clk, NULL); + +#define _REGISTER_CLOCK(d, n, c) \ + { \ + .dev_id = d, \ + .con_id = n, \ + .clk = &c, \ + }, + +static struct clk_lookup lookups[] = { + _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk) + _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk) + _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk) + _REGISTER_CLOCK(NULL, "gpt", gpt_clk) + _REGISTER_CLOCK("fec.0", NULL, fec_clk) +}; + +static void clk_tree_init(void) +{ + u32 reg; + + ipg_perclk.set_parent(&ipg_perclk, &lp_apm_clk); + + /* + * Initialise the IPG PER CLK dividers to 3. IPG_PER_CLK should be at + * 8MHz, its derived from lp_apm. + * + * FIXME: Verify if true for all boards + */ + reg = __raw_readl(MXC_CCM_CBCDR); + reg &= ~MXC_CCM_CBCDR_PERCLK_PRED1_MASK; + reg &= ~MXC_CCM_CBCDR_PERCLK_PRED2_MASK; + reg &= ~MXC_CCM_CBCDR_PERCLK_PODF_MASK; + reg |= (2 << MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET); + __raw_writel(reg, MXC_CCM_CBCDR); +} + +int __init mx51_clocks_init(unsigned long ckil, unsigned long osc, + unsigned long ckih1, unsigned long ckih2) +{ + int i; + + external_low_reference = ckil; + external_high_reference = ckih1; + ckih2_reference = ckih2; + oscillator_reference = osc; + + for (i = 0; i < ARRAY_SIZE(lookups); i++) + clkdev_add(&lookups[i]); + + clk_tree_init(); + + clk_enable(&cpu_clk); + clk_enable(&main_bus_clk); + + /* System timer */ + mxc_timer_init(&gpt_clk, MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR), + MX51_MXC_INT_GPT); + return 0; +} diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-mx5/cpu.c new file mode 100644 index 00000000000..41c769f08c4 --- /dev/null +++ b/arch/arm/mach-mx5/cpu.c @@ -0,0 +1,47 @@ +/* + * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + * + * This file contains the CPU initialization code. + */ + +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <mach/hardware.h> +#include <asm/io.h> + +static int __init post_cpu_init(void) +{ + unsigned int reg; + void __iomem *base; + + if (!cpu_is_mx51()) + return 0; + + base = MX51_IO_ADDRESS(MX51_AIPS1_BASE_ADDR); + __raw_writel(0x0, base + 0x40); + __raw_writel(0x0, base + 0x44); + __raw_writel(0x0, base + 0x48); + __raw_writel(0x0, base + 0x4C); + reg = __raw_readl(base + 0x50) & 0x00FFFFFF; + __raw_writel(reg, base + 0x50); + + base = MX51_IO_ADDRESS(MX51_AIPS2_BASE_ADDR); + __raw_writel(0x0, base + 0x40); + __raw_writel(0x0, base + 0x44); + __raw_writel(0x0, base + 0x48); + __raw_writel(0x0, base + 0x4C); + reg = __raw_readl(base + 0x50) & 0x00FFFFFF; + __raw_writel(reg, base + 0x50); + + return 0; +} + +postcore_initcall(post_cpu_init); diff --git a/arch/arm/mach-mx5/crm_regs.h b/arch/arm/mach-mx5/crm_regs.h new file mode 100644 index 00000000000..c776b9af062 --- /dev/null +++ b/arch/arm/mach-mx5/crm_regs.h @@ -0,0 +1,583 @@ +/* + * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ARCH_ARM_MACH_MX51_CRM_REGS_H__ +#define __ARCH_ARM_MACH_MX51_CRM_REGS_H__ + +#define MX51_CCM_BASE MX51_IO_ADDRESS(MX51_CCM_BASE_ADDR) +#define MX51_DPLL1_BASE MX51_IO_ADDRESS(MX51_PLL1_BASE_ADDR) +#define MX51_DPLL2_BASE MX51_IO_ADDRESS(MX51_PLL2_BASE_ADDR) +#define MX51_DPLL3_BASE MX51_IO_ADDRESS(MX51_PLL3_BASE_ADDR) +#define MX51_CORTEXA8_BASE MX51_IO_ADDRESS(MX51_ARM_BASE_ADDR) +#define MX51_GPC_BASE MX51_IO_ADDRESS(MX51_GPC_BASE_ADDR) + +/* PLL Register Offsets */ +#define MXC_PLL_DP_CTL 0x00 +#define MXC_PLL_DP_CONFIG 0x04 +#define MXC_PLL_DP_OP 0x08 +#define MXC_PLL_DP_MFD 0x0C +#define MXC_PLL_DP_MFN 0x10 +#define MXC_PLL_DP_MFNMINUS 0x14 +#define MXC_PLL_DP_MFNPLUS 0x18 +#define MXC_PLL_DP_HFS_OP 0x1C +#define MXC_PLL_DP_HFS_MFD 0x20 +#define MXC_PLL_DP_HFS_MFN 0x24 +#define MXC_PLL_DP_MFN_TOGC 0x28 +#define MXC_PLL_DP_DESTAT 0x2c + +/* PLL Register Bit definitions */ +#define MXC_PLL_DP_CTL_MUL_CTRL 0x2000 +#define MXC_PLL_DP_CTL_DPDCK0_2_EN 0x1000 +#define MXC_PLL_DP_CTL_DPDCK0_2_OFFSET 12 +#define MXC_PLL_DP_CTL_ADE 0x800 +#define MXC_PLL_DP_CTL_REF_CLK_DIV 0x400 +#define MXC_PLL_DP_CTL_REF_CLK_SEL_MASK (3 << 8) +#define MXC_PLL_DP_CTL_REF_CLK_SEL_OFFSET 8 +#define MXC_PLL_DP_CTL_HFSM 0x80 +#define MXC_PLL_DP_CTL_PRE 0x40 +#define MXC_PLL_DP_CTL_UPEN 0x20 +#define MXC_PLL_DP_CTL_RST 0x10 +#define MXC_PLL_DP_CTL_RCP 0x8 +#define MXC_PLL_DP_CTL_PLM 0x4 +#define MXC_PLL_DP_CTL_BRM0 0x2 +#define MXC_PLL_DP_CTL_LRF 0x1 + +#define MXC_PLL_DP_CONFIG_BIST 0x8 +#define MXC_PLL_DP_CONFIG_SJC_CE 0x4 +#define MXC_PLL_DP_CONFIG_AREN 0x2 +#define MXC_PLL_DP_CONFIG_LDREQ 0x1 + +#define MXC_PLL_DP_OP_MFI_OFFSET 4 +#define MXC_PLL_DP_OP_MFI_MASK (0xF << 4) +#define MXC_PLL_DP_OP_PDF_OFFSET 0 +#define MXC_PLL_DP_OP_PDF_MASK 0xF + +#define MXC_PLL_DP_MFD_OFFSET 0 +#define MXC_PLL_DP_MFD_MASK 0x07FFFFFF + +#define MXC_PLL_DP_MFN_OFFSET 0x0 +#define MXC_PLL_DP_MFN_MASK 0x07FFFFFF + +#define MXC_PLL_DP_MFN_TOGC_TOG_DIS (1 << 17) +#define MXC_PLL_DP_MFN_TOGC_TOG_EN (1 << 16) +#define MXC_PLL_DP_MFN_TOGC_CNT_OFFSET 0x0 +#define MXC_PLL_DP_MFN_TOGC_CNT_MASK 0xFFFF + +#define MXC_PLL_DP_DESTAT_TOG_SEL (1 << 31) +#define MXC_PLL_DP_DESTAT_MFN 0x07FFFFFF + +/* Register addresses of CCM*/ +#define MXC_CCM_CCR (MX51_CCM_BASE + 0x00) +#define MXC_CCM_CCDR (MX51_CCM_BASE + 0x04) +#define MXC_CCM_CSR (MX51_CCM_BASE + 0x08) +#define MXC_CCM_CCSR (MX51_CCM_BASE + 0x0C) +#define MXC_CCM_CACRR (MX51_CCM_BASE + 0x10) +#define MXC_CCM_CBCDR (MX51_CCM_BASE + 0x14) +#define MXC_CCM_CBCMR (MX51_CCM_BASE + 0x18) +#define MXC_CCM_CSCMR1 (MX51_CCM_BASE + 0x1C) +#define MXC_CCM_CSCMR2 (MX51_CCM_BASE + 0x20) +#define MXC_CCM_CSCDR1 (MX51_CCM_BASE + 0x24) +#define MXC_CCM_CS1CDR (MX51_CCM_BASE + 0x28) +#define MXC_CCM_CS2CDR (MX51_CCM_BASE + 0x2C) +#define MXC_CCM_CDCDR (MX51_CCM_BASE + 0x30) +#define MXC_CCM_CHSCDR (MX51_CCM_BASE + 0x34) +#define MXC_CCM_CSCDR2 (MX51_CCM_BASE + 0x38) +#define MXC_CCM_CSCDR3 (MX51_CCM_BASE + 0x3C) +#define MXC_CCM_CSCDR4 (MX51_CCM_BASE + 0x40) +#define MXC_CCM_CWDR (MX51_CCM_BASE + 0x44) +#define MXC_CCM_CDHIPR (MX51_CCM_BASE + 0x48) +#define MXC_CCM_CDCR (MX51_CCM_BASE + 0x4C) +#define MXC_CCM_CTOR (MX51_CCM_BASE + 0x50) +#define MXC_CCM_CLPCR (MX51_CCM_BASE + 0x54) +#define MXC_CCM_CISR (MX51_CCM_BASE + 0x58) +#define MXC_CCM_CIMR (MX51_CCM_BASE + 0x5C) +#define MXC_CCM_CCOSR (MX51_CCM_BASE + 0x60) +#define MXC_CCM_CGPR (MX51_CCM_BASE + 0x64) +#define MXC_CCM_CCGR0 (MX51_CCM_BASE + 0x68) +#define MXC_CCM_CCGR1 (MX51_CCM_BASE + 0x6C) +#define MXC_CCM_CCGR2 (MX51_CCM_BASE + 0x70) +#define MXC_CCM_CCGR3 (MX51_CCM_BASE + 0x74) +#define MXC_CCM_CCGR4 (MX51_CCM_BASE + 0x78) +#define MXC_CCM_CCGR5 (MX51_CCM_BASE + 0x7C) +#define MXC_CCM_CCGR6 (MX51_CCM_BASE + 0x80) +#define MXC_CCM_CMEOR (MX51_CCM_BASE + 0x84) + +/* Define the bits in register CCR */ +#define MXC_CCM_CCR_COSC_EN (1 << 12) +#define MXC_CCM_CCR_FPM_MULT_MASK (1 << 11) +#define MXC_CCM_CCR_CAMP2_EN (1 << 10) +#define MXC_CCM_CCR_CAMP1_EN (1 << 9) +#define MXC_CCM_CCR_FPM_EN (1 << 8) +#define MXC_CCM_CCR_OSCNT_OFFSET (0) +#define MXC_CCM_CCR_OSCNT_MASK (0xFF) + +/* Define the bits in register CCDR */ +#define MXC_CCM_CCDR_HSC_HS_MASK (0x1 << 18) +#define MXC_CCM_CCDR_IPU_HS_MASK (0x1 << 17) +#define MXC_CCM_CCDR_EMI_HS_MASK (0x1 << 16) + +/* Define the bits in register CSR */ +#define MXC_CCM_CSR_COSR_READY (1 << 5) +#define MXC_CCM_CSR_LVS_VALUE (1 << 4) +#define MXC_CCM_CSR_CAMP2_READY (1 << 3) +#define MXC_CCM_CSR_CAMP1_READY (1 << 2) +#define MXC_CCM_CSR_FPM_READY (1 << 1) +#define MXC_CCM_CSR_REF_EN_B (1 << 0) + +/* Define the bits in register CCSR */ +#define MXC_CCM_CCSR_LP_APM_SEL (0x1 << 9) +#define MXC_CCM_CCSR_STEP_SEL_OFFSET (7) +#define MXC_CCM_CCSR_STEP_SEL_MASK (0x3 << 7) +#define MXC_CCM_CCSR_STEP_SEL_LP_APM 0 +#define MXC_CCM_CCSR_STEP_SEL_PLL1_BYPASS 1 /* Only when JTAG connected? */ +#define MXC_CCM_CCSR_STEP_SEL_PLL2_DIVIDED 2 +#define MXC_CCM_CCSR_STEP_SEL_PLL3_DIVIDED 3 +#define MXC_CCM_CCSR_PLL2_PODF_OFFSET (5) +#define MXC_CCM_CCSR_PLL2_PODF_MASK (0x3 << 5) +#define MXC_CCM_CCSR_PLL3_PODF_OFFSET (3) +#define MXC_CCM_CCSR_PLL3_PODF_MASK (0x3 << 3) +#define MXC_CCM_CCSR_PLL1_SW_CLK_SEL (1 << 2) /* 0: pll1_main_clk, + 1: step_clk */ +#define MXC_CCM_CCSR_PLL2_SW_CLK_SEL (1 << 1) +#define MXC_CCM_CCSR_PLL3_SW_CLK_SEL (1 << 0) + +/* Define the bits in register CACRR */ +#define MXC_CCM_CACRR_ARM_PODF_OFFSET (0) +#define MXC_CCM_CACRR_ARM_PODF_MASK (0x7) + +/* Define the bits in register CBCDR */ +#define MXC_CCM_CBCDR_EMI_CLK_SEL (0x1 << 26) +#define MXC_CCM_CBCDR_PERIPH_CLK_SEL (0x1 << 25) +#define MXC_CCM_CBCDR_DDR_HF_SEL_OFFSET (30) +#define MXC_CCM_CBCDR_DDR_HF_SEL (0x1 << 30) +#define MXC_CCM_CBCDR_DDR_PODF_OFFSET (27) +#define MXC_CCM_CBCDR_DDR_PODF_MASK (0x7 << 27) +#define MXC_CCM_CBCDR_EMI_PODF_OFFSET (22) +#define MXC_CCM_CBCDR_EMI_PODF_MASK (0x7 << 22) +#define MXC_CCM_CBCDR_AXI_B_PODF_OFFSET (19) +#define MXC_CCM_CBCDR_AXI_B_PODF_MASK (0x7 << 19) +#define MXC_CCM_CBCDR_AXI_A_PODF_OFFSET (16) +#define MXC_CCM_CBCDR_AXI_A_PODF_MASK (0x7 << 16) +#define MXC_CCM_CBCDR_NFC_PODF_OFFSET (13) +#define MXC_CCM_CBCDR_NFC_PODF_MASK (0x7 << 13) +#define MXC_CCM_CBCDR_AHB_PODF_OFFSET (10) +#define MXC_CCM_CBCDR_AHB_PODF_MASK (0x7 << 10) +#define MXC_CCM_CBCDR_IPG_PODF_OFFSET (8) +#define MXC_CCM_CBCDR_IPG_PODF_MASK (0x3 << 8) +#define MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET (6) +#define MXC_CCM_CBCDR_PERCLK_PRED1_MASK (0x3 << 6) +#define MXC_CCM_CBCDR_PERCLK_PRED2_OFFSET (3) +#define MXC_CCM_CBCDR_PERCLK_PRED2_MASK (0x7 << 3) +#define MXC_CCM_CBCDR_PERCLK_PODF_OFFSET (0) +#define MXC_CCM_CBCDR_PERCLK_PODF_MASK (0x7) + +/* Define the bits in register CBCMR */ +#define MXC_CCM_CBCMR_VPU_AXI_CLK_SEL_OFFSET (14) +#define MXC_CCM_CBCMR_VPU_AXI_CLK_SEL_MASK (0x3 << 14) +#define MXC_CCM_CBCMR_PERIPH_CLK_SEL_OFFSET (12) +#define MXC_CCM_CBCMR_PERIPH_CLK_SEL_MASK (0x3 << 12) +#define MXC_CCM_CBCMR_DDR_CLK_SEL_OFFSET (10) +#define MXC_CCM_CBCMR_DDR_CLK_SEL_MASK (0x3 << 10) +#define MXC_CCM_CBCMR_ARM_AXI_CLK_SEL_OFFSET (8) +#define MXC_CCM_CBCMR_ARM_AXI_CLK_SEL_MASK (0x3 << 8) +#define MXC_CCM_CBCMR_IPU_HSP_CLK_SEL_OFFSET (6) +#define MXC_CCM_CBCMR_IPU_HSP_CLK_SEL_MASK (0x3 << 6) +#define MXC_CCM_CBCMR_GPU_CLK_SEL_OFFSET (4) +#define MXC_CCM_CBCMR_GPU_CLK_SEL_MASK (0x3 << 4) +#define MXC_CCM_CBCMR_GPU2D_CLK_SEL_OFFSET (14) +#define MXC_CCM_CBCMR_GPU2D_CLK_SEL_MASK (0x3 << 14) +#define MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL (0x1 << 1) +#define MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL (0x1 << 0) + +/* Define the bits in register CSCMR1 */ +#define MXC_CCM_CSCMR1_SSI_EXT2_CLK_SEL_OFFSET (30) +#define MXC_CCM_CSCMR1_SSI_EXT2_CLK_SEL_MASK (0x3 << 30) +#define MXC_CCM_CSCMR1_SSI_EXT1_CLK_SEL_OFFSET (28) +#define MXC_CCM_CSCMR1_SSI_EXT1_CLK_SEL_MASK (0x3 << 28) +#define MXC_CCM_CSCMR1_USB_PHY_CLK_SEL_OFFSET (26) +#define MXC_CCM_CSCMR1_USB_PHY_CLK_SEL (0x1 << 26) +#define MXC_CCM_CSCMR1_UART_CLK_SEL_OFFSET (24) +#define MXC_CCM_CSCMR1_UART_CLK_SEL_MASK (0x3 << 24) +#define MXC_CCM_CSCMR1_USBOH3_CLK_SEL_OFFSET (22) +#define MXC_CCM_CSCMR1_USBOH3_CLK_SEL_MASK (0x3 << 22) +#define MXC_CCM_CSCMR1_ESDHC1_MSHC1_CLK_SEL_OFFSET (20) +#define MXC_CCM_CSCMR1_ESDHC1_MSHC1_CLK_SEL_MASK (0x3 << 20) +#define MXC_CCM_CSCMR1_ESDHC3_CLK_SEL (0x1 << 19) +#define MXC_CCM_CSCMR1_ESDHC4_CLK_SEL (0x1 << 18) +#define MXC_CCM_CSCMR1_ESDHC2_MSHC2_CLK_SEL_OFFSET (16) +#define MXC_CCM_CSCMR1_ESDHC2_MSHC2_CLK_SEL_MASK (0x3 << 16) +#define MXC_CCM_CSCMR1_SSI1_CLK_SEL_OFFSET (14) +#define MXC_CCM_CSCMR1_SSI1_CLK_SEL_MASK (0x3 << 14) +#define MXC_CCM_CSCMR1_SSI2_CLK_SEL_OFFSET (12) +#define MXC_CCM_CSCMR1_SSI2_CLK_SEL_MASK (0x3 << 12) +#define MXC_CCM_CSCMR1_SSI3_CLK_SEL (0x1 << 11) +#define MXC_CCM_CSCMR1_VPU_RCLK_SEL (0x1 << 10) +#define MXC_CCM_CSCMR1_SSI_APM_CLK_SEL_OFFSET (8) +#define MXC_CCM_CSCMR1_SSI_APM_CLK_SEL_MASK (0x3 << 8) +#define MXC_CCM_CSCMR1_TVE_CLK_SEL (0x1 << 7) +#define MXC_CCM_CSCMR1_TVE_EXT_CLK_SEL (0x1 << 6) +#define MXC_CCM_CSCMR1_CSPI_CLK_SEL_OFFSET (4) +#define MXC_CCM_CSCMR1_CSPI_CLK_SEL_MASK (0x3 << 4) +#define MXC_CCM_CSCMR1_SPDIF_CLK_SEL_OFFSET (2) +#define MXC_CCM_CSCMR1_SPDIF_CLK_SEL_MASK (0x3 << 2) +#define MXC_CCM_CSCMR1_SSI_EXT2_COM_CLK_SEL (0x1 << 1) +#define MXC_CCM_CSCMR1_SSI_EXT1_COM_CLK_SEL (0x1) + +/* Define the bits in register CSCMR2 */ +#define MXC_CCM_CSCMR2_DI_CLK_SEL_OFFSET(n) (26+n*3) +#define MXC_CCM_CSCMR2_DI_CLK_SEL_MASK(n) (0x7 << (26+n*3)) +#define MXC_CCM_CSCMR2_CSI_MCLK2_CLK_SEL_OFFSET (24) +#define MXC_CCM_CSCMR2_CSI_MCLK2_CLK_SEL_MASK (0x3 << 24) +#define MXC_CCM_CSCMR2_CSI_MCLK1_CLK_SEL_OFFSET (22) +#define MXC_CCM_CSCMR2_CSI_MCLK1_CLK_SEL_MASK (0x3 << 22) +#define MXC_CCM_CSCMR2_ESC_CLK_SEL_OFFSET (20) +#define MXC_CCM_CSCMR2_ESC_CLK_SEL_MASK (0x3 << 20) +#define MXC_CCM_CSCMR2_HSC2_CLK_SEL_OFFSET (18) +#define MXC_CCM_CSCMR2_HSC2_CLK_SEL_MASK (0x3 << 18) +#define MXC_CCM_CSCMR2_HSC1_CLK_SEL_OFFSET (16) +#define MXC_CCM_CSCMR2_HSC1_CLK_SEL_MASK (0x3 << 16) +#define MXC_CCM_CSCMR2_HSI2C_CLK_SEL_OFFSET (14) +#define MXC_CCM_CSCMR2_HSI2C_CLK_SEL_MASK (0x3 << 14) +#define MXC_CCM_CSCMR2_FIRI_CLK_SEL_OFFSET (12) +#define MXC_CCM_CSCMR2_FIRI_CLK_SEL_MASK (0x3 << 12) +#define MXC_CCM_CSCMR2_SIM_CLK_SEL_OFFSET (10) +#define MXC_CCM_CSCMR2_SIM_CLK_SEL_MASK (0x3 << 10) +#define MXC_CCM_CSCMR2_SLIMBUS_COM (0x1 << 9) +#define MXC_CCM_CSCMR2_SLIMBUS_CLK_SEL_OFFSET (6) +#define MXC_CCM_CSCMR2_SLIMBUS_CLK_SEL_MASK (0x7 << 6) +#define MXC_CCM_CSCMR2_SPDIF1_COM (1 << 5) +#define MXC_CCM_CSCMR2_SPDIF0_COM (1 << 4) +#define MXC_CCM_CSCMR2_SPDIF1_CLK_SEL_OFFSET (2) +#define MXC_CCM_CSCMR2_SPDIF1_CLK_SEL_MASK (0x3 << 2) +#define MXC_CCM_CSCMR2_SPDIF0_CLK_SEL_OFFSET (0) +#define MXC_CCM_CSCMR2_SPDIF0_CLK_SEL_MASK (0x3) + +/* Define the bits in register CSCDR1 */ +#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PRED_OFFSET (22) +#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PRED_MASK (0x7 << 22) +#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PODF_OFFSET (19) +#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PODF_MASK (0x7 << 19) +#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PRED_OFFSET (16) +#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PRED_MASK (0x7 << 16) +#define MXC_CCM_CSCDR1_PGC_CLK_PODF_OFFSET (14) +#define MXC_CCM_CSCDR1_PGC_CLK_PODF_MASK (0x3 << 14) +#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PODF_OFFSET (11) +#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PODF_MASK (0x7 << 11) +#define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_OFFSET (8) +#define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_MASK (0x7 << 8) +#define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_OFFSET (6) +#define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_MASK (0x3 << 6) +#define MXC_CCM_CSCDR1_UART_CLK_PRED_OFFSET (3) +#define MXC_CCM_CSCDR1_UART_CLK_PRED_MASK (0x7 << 3) +#define MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET (0) +#define MXC_CCM_CSCDR1_UART_CLK_PODF_MASK (0x7) + +/* Define the bits in register CS1CDR and CS2CDR */ +#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PRED_OFFSET (22) +#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PRED_MASK (0x7 << 22) +#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PODF_OFFSET (16) +#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PODF_MASK (0x3F << 16) +#define MXC_CCM_CS1CDR_SSI1_CLK_PRED_OFFSET (6) +#define MXC_CCM_CS1CDR_SSI1_CLK_PRED_MASK (0x7 << 6) +#define MXC_CCM_CS1CDR_SSI1_CLK_PODF_OFFSET (0) +#define MXC_CCM_CS1CDR_SSI1_CLK_PODF_MASK (0x3F) + +#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PRED_OFFSET (22) +#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PRED_MASK (0x7 << 22) +#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PODF_OFFSET (16) +#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PODF_MASK (0x3F << 16) +#define MXC_CCM_CS2CDR_SSI2_CLK_PRED_OFFSET (6) +#define MXC_CCM_CS2CDR_SSI2_CLK_PRED_MASK (0x7 << 6) +#define MXC_CCM_CS2CDR_SSI2_CLK_PODF_OFFSET (0) +#define MXC_CCM_CS2CDR_SSI2_CLK_PODF_MASK (0x3F) + +/* Define the bits in register CDCDR */ +#define MXC_CCM_CDCDR_TVE_CLK_PRED_OFFSET (28) +#define MXC_CCM_CDCDR_TVE_CLK_PRED_MASK (0x7 << 28) +#define MXC_CCM_CDCDR_SPDIF0_CLK_PRED_OFFSET (25) +#define MXC_CCM_CDCDR_SPDIF0_CLK_PRED_MASK (0x7 << 25) +#define MXC_CCM_CDCDR_SPDIF0_CLK_PODF_OFFSET (19) +#define MXC_CCM_CDCDR_SPDIF0_CLK_PODF_MASK (0x3F << 19) +#define MXC_CCM_CDCDR_SPDIF1_CLK_PRED_OFFSET (16) +#define MXC_CCM_CDCDR_SPDIF1_CLK_PRED_MASK (0x7 << 16) +#define MXC_CCM_CDCDR_SPDIF1_CLK_PODF_OFFSET (9) +#define MXC_CCM_CDCDR_SPDIF1_CLK_PODF_MASK (0x3F << 9) +#define MXC_CCM_CDCDR_DI_CLK_PRED_OFFSET (6) +#define MXC_CCM_CDCDR_DI_CLK_PRED_MASK (0x7 << 6) +#define MXC_CCM_CDCDR_USB_PHY_PRED_OFFSET (3) +#define MXC_CCM_CDCDR_USB_PHY_PRED_MASK (0x7 << 3) +#define MXC_CCM_CDCDR_USB_PHY_PODF_OFFSET (0) +#define MXC_CCM_CDCDR_USB_PHY_PODF_MASK (0x7) + +/* Define the bits in register CHSCCDR */ +#define MXC_CCM_CHSCCDR_ESC_CLK_PRED_OFFSET (12) +#define MXC_CCM_CHSCCDR_ESC_CLK_PRED_MASK (0x7 << 12) +#define MXC_CCM_CHSCCDR_ESC_CLK_PODF_OFFSET (6) +#define MXC_CCM_CHSCCDR_ESC_CLK_PODF_MASK (0x3F << 6) +#define MXC_CCM_CHSCCDR_HSC2_CLK_PODF_OFFSET (3) +#define MXC_CCM_CHSCCDR_HSC2_CLK_PODF_MASK (0x7 << 3) +#define MXC_CCM_CHSCCDR_HSC1_CLK_PODF_OFFSET (0) +#define MXC_CCM_CHSCCDR_HSC1_CLK_PODF_MASK (0x7) + +/* Define the bits in register CSCDR2 */ +#define MXC_CCM_CSCDR2_CSPI_CLK_PRED_OFFSET (25) +#define MXC_CCM_CSCDR2_CSPI_CLK_PRED_MASK (0x7 << 25) +#define MXC_CCM_CSCDR2_CSPI_CLK_PODF_OFFSET (19) +#define MXC_CCM_CSCDR2_CSPI_CLK_PODF_MASK (0x3F << 19) +#define MXC_CCM_CSCDR2_SIM_CLK_PRED_OFFSET (16) +#define MXC_CCM_CSCDR2_SIM_CLK_PRED_MASK (0x7 << 16) +#define MXC_CCM_CSCDR2_SIM_CLK_PODF_OFFSET (9) +#define MXC_CCM_CSCDR2_SIM_CLK_PODF_MASK (0x3F << 9) +#define MXC_CCM_CSCDR2_SLIMBUS_CLK_PRED_OFFSET (6) +#define MXC_CCM_CSCDR2_SLIMBUS_PRED_MASK (0x7 << 6) +#define MXC_CCM_CSCDR2_SLIMBUS_PODF_OFFSET (0) +#define MXC_CCM_CSCDR2_SLIMBUS_PODF_MASK (0x3F) + +/* Define the bits in register CSCDR3 */ +#define MXC_CCM_CSCDR3_HSI2C_CLK_PRED_OFFSET (16) +#define MXC_CCM_CSCDR3_HSI2C_CLK_PRED_MASK (0x7 << 16) +#define MXC_CCM_CSCDR3_HSI2C_CLK_PODF_OFFSET (9) +#define MXC_CCM_CSCDR3_HSI2C_CLK_PODF_MASK (0x3F << 9) +#define MXC_CCM_CSCDR3_FIRI_CLK_PRED_OFFSET (6) +#define MXC_CCM_CSCDR3_FIRI_CLK_PRED_MASK (0x7 << 6) +#define MXC_CCM_CSCDR3_FIRI_CLK_PODF_OFFSET (0) +#define MXC_CCM_CSCDR3_FIRI_CLK_PODF_MASK (0x3F) + +/* Define the bits in register CSCDR4 */ +#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PRED_OFFSET (16) +#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PRED_MASK (0x7 << 16) +#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PODF_OFFSET (9) +#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PODF_MASK (0x3F << 9) +#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PRED_OFFSET (6) +#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PRED_MASK (0x7 << 6) +#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PODF_OFFSET (0) +#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PODF_MASK (0x3F) + +/* Define the bits in register CDHIPR */ +#define MXC_CCM_CDHIPR_ARM_PODF_BUSY (1 << 16) +#define MXC_CCM_CDHIPR_DDR_HF_CLK_SEL_BUSY (1 << 8) +#define MXC_CCM_CDHIPR_DDR_PODF_BUSY (1 << 7) +#define MXC_CCM_CDHIPR_EMI_CLK_SEL_BUSY (1 << 6) +#define MXC_CCM_CDHIPR_PERIPH_CLK_SEL_BUSY (1 << 5) +#define MXC_CCM_CDHIPR_NFC_IPG_INT_MEM_PODF_BUSY (1 << 4) +#define MXC_CCM_CDHIPR_AHB_PODF_BUSY (1 << 3) +#define MXC_CCM_CDHIPR_EMI_PODF_BUSY (1 << 2) +#define MXC_CCM_CDHIPR_AXI_B_PODF_BUSY (1 << 1) +#define MXC_CCM_CDHIPR_AXI_A_PODF_BUSY (1 << 0) + +/* Define the bits in register CDCR */ +#define MXC_CCM_CDCR_ARM_FREQ_SHIFT_DIVIDER (0x1 << 2) +#define MXC_CCM_CDCR_PERIPH_CLK_DVFS_PODF_OFFSET (0) +#define MXC_CCM_CDCR_PERIPH_CLK_DVFS_PODF_MASK (0x3) + +/* Define the bits in register CLPCR */ +#define MXC_CCM_CLPCR_BYPASS_HSC_LPM_HS (0x1 << 23) +#define MXC_CCM_CLPCR_BYPASS_SCC_LPM_HS (0x1 << 22) +#define MXC_CCM_CLPCR_BYPASS_MAX_LPM_HS (0x1 << 21) +#define MXC_CCM_CLPCR_BYPASS_SDMA_LPM_HS (0x1 << 20) +#define MXC_CCM_CLPCR_BYPASS_EMI_LPM_HS (0x1 << 19) +#define MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS (0x1 << 18) +#define MXC_CCM_CLPCR_BYPASS_RTIC_LPM_HS (0x1 << 17) +#define MXC_CCM_CLPCR_BYPASS_RNGC_LPM_HS (0x1 << 16) +#define MXC_CCM_CLPCR_COSC_PWRDOWN (0x1 << 11) +#define MXC_CCM_CLPCR_STBY_COUNT_OFFSET (9) +#define MXC_CCM_CLPCR_STBY_COUNT_MASK (0x3 << 9) +#define MXC_CCM_CLPCR_VSTBY (0x1 << 8) +#define MXC_CCM_CLPCR_DIS_REF_OSC (0x1 << 7) +#define MXC_CCM_CLPCR_SBYOS (0x1 << 6) +#define MXC_CCM_CLPCR_ARM_CLK_DIS_ON_LPM (0x1 << 5) +#define MXC_CCM_CLPCR_LPSR_CLK_SEL_OFFSET (3) +#define MXC_CCM_CLPCR_LPSR_CLK_SEL_MASK (0x3 << 3) +#define MXC_CCM_CLPCR_LPM_OFFSET (0) +#define MXC_CCM_CLPCR_LPM_MASK (0x3) + +/* Define the bits in register CISR */ +#define MXC_CCM_CISR_ARM_PODF_LOADED (0x1 << 25) +#define MXC_CCM_CISR_NFC_IPG_INT_MEM_PODF_LOADED (0x1 << 21) +#define MXC_CCM_CISR_AHB_PODF_LOADED (0x1 << 20) +#define MXC_CCM_CISR_EMI_PODF_LOADED (0x1 << 19) +#define MXC_CCM_CISR_AXI_B_PODF_LOADED (0x1 << 18) +#define MXC_CCM_CISR_AXI_A_PODF_LOADED (0x1 << 17) +#define MXC_CCM_CISR_DIVIDER_LOADED (0x1 << 16) +#define MXC_CCM_CISR_COSC_READY (0x1 << 6) +#define MXC_CCM_CISR_CKIH2_READY (0x1 << 5) +#define MXC_CCM_CISR_CKIH_READY (0x1 << 4) +#define MXC_CCM_CISR_FPM_READY (0x1 << 3) +#define MXC_CCM_CISR_LRF_PLL3 (0x1 << 2) +#define MXC_CCM_CISR_LRF_PLL2 (0x1 << 1) +#define MXC_CCM_CISR_LRF_PLL1 (0x1) + +/* Define the bits in register CIMR */ +#define MXC_CCM_CIMR_MASK_ARM_PODF_LOADED (0x1 << 25) +#define MXC_CCM_CIMR_MASK_NFC_IPG_INT_MEM_PODF_LOADED (0x1 << 21) +#define MXC_CCM_CIMR_MASK_EMI_PODF_LOADED (0x1 << 20) +#define MXC_CCM_CIMR_MASK_AXI_C_PODF_LOADED (0x1 << 19) +#define MXC_CCM_CIMR_MASK_AXI_B_PODF_LOADED (0x1 << 18) +#define MXC_CCM_CIMR_MASK_AXI_A_PODF_LOADED (0x1 << 17) +#define MXC_CCM_CIMR_MASK_DIVIDER_LOADED (0x1 << 16) +#define MXC_CCM_CIMR_MASK_COSC_READY (0x1 << 5) +#define MXC_CCM_CIMR_MASK_CKIH_READY (0x1 << 4) +#define MXC_CCM_CIMR_MASK_FPM_READY (0x1 << 3) +#define MXC_CCM_CIMR_MASK_LRF_PLL3 (0x1 << 2) +#define MXC_CCM_CIMR_MASK_LRF_PLL2 (0x1 << 1) +#define MXC_CCM_CIMR_MASK_LRF_PLL1 (0x1) + +/* Define the bits in register CCOSR */ +#define MXC_CCM_CCOSR_CKO2_EN_OFFSET (0x1 << 24) +#define MXC_CCM_CCOSR_CKO2_DIV_OFFSET (21) +#define MXC_CCM_CCOSR_CKO2_DIV_MASK (0x7 << 21) +#define MXC_CCM_CCOSR_CKO2_SEL_OFFSET (16) +#define MXC_CCM_CCOSR_CKO2_SEL_MASK (0x1F << 16) +#define MXC_CCM_CCOSR_CKOL_EN (0x1 << 7) +#define MXC_CCM_CCOSR_CKOL_DIV_OFFSET (4) +#define MXC_CCM_CCOSR_CKOL_DIV_MASK (0x7 << 4) +#define MXC_CCM_CCOSR_CKOL_SEL_OFFSET (0) +#define MXC_CCM_CCOSR_CKOL_SEL_MASK (0xF) + +/* Define the bits in registers CGPR */ +#define MXC_CCM_CGPR_EFUSE_PROG_SUPPLY_GATE (0x1 << 4) +#define MXC_CCM_CGPR_FPM_SEL (0x1 << 3) +#define MXC_CCM_CGPR_VL_L2BIST_CLKDIV_OFFSET (0) +#define MXC_CCM_CGPR_VL_L2BIST_CLKDIV_MASK (0x7) + +/* Define the bits in registers CCGRx */ +#define MXC_CCM_CCGRx_CG_MASK 0x3 +#define MXC_CCM_CCGRx_MOD_OFF 0x0 +#define MXC_CCM_CCGRx_MOD_ON 0x3 +#define MXC_CCM_CCGRx_MOD_IDLE 0x1 + +#define MXC_CCM_CCGRx_CG15_MASK (0x3 << 30) +#define MXC_CCM_CCGRx_CG14_MASK (0x3 << 28) +#define MXC_CCM_CCGRx_CG13_MASK (0x3 << 26) +#define MXC_CCM_CCGRx_CG12_MASK (0x3 << 24) +#define MXC_CCM_CCGRx_CG11_MASK (0x3 << 22) +#define MXC_CCM_CCGRx_CG10_MASK (0x3 << 20) +#define MXC_CCM_CCGRx_CG9_MASK (0x3 << 18) +#define MXC_CCM_CCGRx_CG8_MASK (0x3 << 16) +#define MXC_CCM_CCGRx_CG5_MASK (0x3 << 10) +#define MXC_CCM_CCGRx_CG4_MASK (0x3 << 8) +#define MXC_CCM_CCGRx_CG3_MASK (0x3 << 6) +#define MXC_CCM_CCGRx_CG2_MASK (0x3 << 4) +#define MXC_CCM_CCGRx_CG1_MASK (0x3 << 2) +#define MXC_CCM_CCGRx_CG0_MASK (0x3 << 0) + +#define MXC_CCM_CCGRx_CG15_OFFSET 30 +#define MXC_CCM_CCGRx_CG14_OFFSET 28 +#define MXC_CCM_CCGRx_CG13_OFFSET 26 +#define MXC_CCM_CCGRx_CG12_OFFSET 24 +#define MXC_CCM_CCGRx_CG11_OFFSET 22 +#define MXC_CCM_CCGRx_CG10_OFFSET 20 +#define MXC_CCM_CCGRx_CG9_OFFSET 18 +#define MXC_CCM_CCGRx_CG8_OFFSET 16 +#define MXC_CCM_CCGRx_CG7_OFFSET 14 +#define MXC_CCM_CCGRx_CG6_OFFSET 12 +#define MXC_CCM_CCGRx_CG5_OFFSET 10 +#define MXC_CCM_CCGRx_CG4_OFFSET 8 +#define MXC_CCM_CCGRx_CG3_OFFSET 6 +#define MXC_CCM_CCGRx_CG2_OFFSET 4 +#define MXC_CCM_CCGRx_CG1_OFFSET 2 +#define MXC_CCM_CCGRx_CG0_OFFSET 0 + +#define MXC_DPTC_LP_BASE (MX51_GPC_BASE + 0x80) +#define MXC_DPTC_GP_BASE (MX51_GPC_BASE + 0x100) +#define MXC_DVFS_CORE_BASE (MX51_GPC_BASE + 0x180) +#define MXC_DPTC_PER_BASE (MX51_GPC_BASE + 0x1C0) +#define MXC_PGC_IPU_BASE (MX51_GPC_BASE + 0x220) +#define MXC_PGC_VPU_BASE (MX51_GPC_BASE + 0x240) +#define MXC_PGC_GPU_BASE (MX51_GPC_BASE + 0x260) +#define MXC_SRPG_NEON_BASE (MX51_GPC_BASE + 0x280) +#define MXC_SRPG_ARM_BASE (MX51_GPC_BASE + 0x2A0) +#define MXC_SRPG_EMPGC0_BASE (MX51_GPC_BASE + 0x2C0) +#define MXC_SRPG_EMPGC1_BASE (MX51_GPC_BASE + 0x2D0) +#define MXC_SRPG_MEGAMIX_BASE (MX51_GPC_BASE + 0x2E0) +#define MXC_SRPG_EMI_BASE (MX51_GPC_BASE + 0x300) + +/* CORTEXA8 platform */ +#define MXC_CORTEXA8_PLAT_PVID (MX51_CORTEXA8_BASE + 0x0) +#define MXC_CORTEXA8_PLAT_GPC (MX51_CORTEXA8_BASE + 0x4) +#define MXC_CORTEXA8_PLAT_PIC (MX51_CORTEXA8_BASE + 0x8) +#define MXC_CORTEXA8_PLAT_LPC (MX51_CORTEXA8_BASE + 0xC) +#define MXC_CORTEXA8_PLAT_NEON_LPC (MX51_CORTEXA8_BASE + 0x10) +#define MXC_CORTEXA8_PLAT_ICGC (MX51_CORTEXA8_BASE + 0x14) +#define MXC_CORTEXA8_PLAT_AMC (MX51_CORTEXA8_BASE + 0x18) +#define MXC_CORTEXA8_PLAT_NMC (MX51_CORTEXA8_BASE + 0x20) +#define MXC_CORTEXA8_PLAT_NMS (MX51_CORTEXA8_BASE + 0x24) + +/* DVFS CORE */ +#define MXC_DVFSTHRS (MXC_DVFS_CORE_BASE + 0x00) +#define MXC_DVFSCOUN (MXC_DVFS_CORE_BASE + 0x04) +#define MXC_DVFSSIG1 (MXC_DVFS_CORE_BASE + 0x08) +#define MXC_DVFSSIG0 (MXC_DVFS_CORE_BASE + 0x0C) +#define MXC_DVFSGPC0 (MXC_DVFS_CORE_BASE + 0x10) +#define MXC_DVFSGPC1 (MXC_DVFS_CORE_BASE + 0x14) +#define MXC_DVFSGPBT (MXC_DVFS_CORE_BASE + 0x18) +#define MXC_DVFSEMAC (MXC_DVFS_CORE_BASE + 0x1C) +#define MXC_DVFSCNTR (MXC_DVFS_CORE_BASE + 0x20) +#define MXC_DVFSLTR0_0 (MXC_DVFS_CORE_BASE + 0x24) +#define MXC_DVFSLTR0_1 (MXC_DVFS_CORE_BASE + 0x28) +#define MXC_DVFSLTR1_0 (MXC_DVFS_CORE_BASE + 0x2C) +#define MXC_DVFSLTR1_1 (MXC_DVFS_CORE_BASE + 0x30) +#define MXC_DVFSPT0 (MXC_DVFS_CORE_BASE + 0x34) +#define MXC_DVFSPT1 (MXC_DVFS_CORE_BASE + 0x38) +#define MXC_DVFSPT2 (MXC_DVFS_CORE_BASE + 0x3C) +#define MXC_DVFSPT3 (MXC_DVFS_CORE_BASE + 0x40) + +/* GPC */ +#define MXC_GPC_CNTR (MX51_GPC_BASE + 0x0) +#define MXC_GPC_PGR (MX51_GPC_BASE + 0x4) +#define MXC_GPC_VCR (MX51_GPC_BASE + 0x8) +#define MXC_GPC_ALL_PU (MX51_GPC_BASE + 0xC) +#define MXC_GPC_NEON (MX51_GPC_BASE + 0x10) +#define MXC_GPC_PGR_ARMPG_OFFSET 8 +#define MXC_GPC_PGR_ARMPG_MASK (3 << 8) + +/* PGC */ +#define MXC_PGC_IPU_PGCR (MXC_PGC_IPU_BASE + 0x0) +#define MXC_PGC_IPU_PGSR (MXC_PGC_IPU_BASE + 0xC) +#define MXC_PGC_VPU_PGCR (MXC_PGC_VPU_BASE + 0x0) +#define MXC_PGC_VPU_PGSR (MXC_PGC_VPU_BASE + 0xC) +#define MXC_PGC_GPU_PGCR (MXC_PGC_GPU_BASE + 0x0) +#define MXC_PGC_GPU_PGSR (MXC_PGC_GPU_BASE + 0xC) + +#define MXC_PGCR_PCR 1 +#define MXC_SRPGCR_PCR 1 +#define MXC_EMPGCR_PCR 1 +#define MXC_PGSR_PSR 1 + + +#define MXC_CORTEXA8_PLAT_LPC_DSM (1 << 0) +#define MXC_CORTEXA8_PLAT_LPC_DBG_DSM (1 << 1) + +/* SRPG */ +#define MXC_SRPG_NEON_SRPGCR (MXC_SRPG_NEON_BASE + 0x0) +#define MXC_SRPG_NEON_PUPSCR (MXC_SRPG_NEON_BASE + 0x4) +#define MXC_SRPG_NEON_PDNSCR (MXC_SRPG_NEON_BASE + 0x8) + +#define MXC_SRPG_ARM_SRPGCR (MXC_SRPG_ARM_BASE + 0x0) +#define MXC_SRPG_ARM_PUPSCR (MXC_SRPG_ARM_BASE + 0x4) +#define MXC_SRPG_ARM_PDNSCR (MXC_SRPG_ARM_BASE + 0x8) + +#define MXC_SRPG_EMPGC0_SRPGCR (MXC_SRPG_EMPGC0_BASE + 0x0) +#define MXC_SRPG_EMPGC0_PUPSCR (MXC_SRPG_EMPGC0_BASE + 0x4) +#define MXC_SRPG_EMPGC0_PDNSCR (MXC_SRPG_EMPGC0_BASE + 0x8) + +#define MXC_SRPG_EMPGC1_SRPGCR (MXC_SRPG_EMPGC1_BASE + 0x0) +#define MXC_SRPG_EMPGC1_PUPSCR (MXC_SRPG_EMPGC1_BASE + 0x4) +#define MXC_SRPG_EMPGC1_PDNSCR (MXC_SRPG_EMPGC1_BASE + 0x8) + +#define MXC_SRPG_MEGAMIX_SRPGCR (MXC_SRPG_MEGAMIX_BASE + 0x0) +#define MXC_SRPG_MEGAMIX_PUPSCR (MXC_SRPG_MEGAMIX_BASE + 0x4) +#define MXC_SRPG_MEGAMIX_PDNSCR (MXC_SRPG_MEGAMIX_BASE + 0x8) + +#define MXC_SRPGC_EMI_SRPGCR (MXC_SRPGC_EMI_BASE + 0x0) +#define MXC_SRPGC_EMI_PUPSCR (MXC_SRPGC_EMI_BASE + 0x4) +#define MXC_SRPGC_EMI_PDNSCR (MXC_SRPGC_EMI_BASE + 0x8) + +#endif /* __ARCH_ARM_MACH_MX51_CRM_REGS_H__ */ diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c new file mode 100644 index 00000000000..d6fd3961ade --- /dev/null +++ b/arch/arm/mach-mx5/devices.c @@ -0,0 +1,96 @@ +/* + * Copyright 2009 Amit Kucheria <amit.kucheria@canonical.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/platform_device.h> +#include <mach/hardware.h> +#include <mach/imx-uart.h> + +static struct resource uart0[] = { + { + .start = MX51_UART1_BASE_ADDR, + .end = MX51_UART1_BASE_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, { + .start = MX51_MXC_INT_UART1, + .end = MX51_MXC_INT_UART1, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device mxc_uart_device0 = { + .name = "imx-uart", + .id = 0, + .resource = uart0, + .num_resources = ARRAY_SIZE(uart0), +}; + +static struct resource uart1[] = { + { + .start = MX51_UART2_BASE_ADDR, + .end = MX51_UART2_BASE_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, { + .start = MX51_MXC_INT_UART2, + .end = MX51_MXC_INT_UART2, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device mxc_uart_device1 = { + .name = "imx-uart", + .id = 1, + .resource = uart1, + .num_resources = ARRAY_SIZE(uart1), +}; + +static struct resource uart2[] = { + { + .start = MX51_UART3_BASE_ADDR, + .end = MX51_UART3_BASE_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, { + .start = MX51_MXC_INT_UART3, + .end = MX51_MXC_INT_UART3, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device mxc_uart_device2 = { + .name = "imx-uart", + .id = 2, + .resource = uart2, + .num_resources = ARRAY_SIZE(uart2), +}; + +static struct resource mxc_fec_resources[] = { + { + .start = MX51_MXC_FEC_BASE_ADDR, + .end = MX51_MXC_FEC_BASE_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, { + .start = MX51_MXC_INT_FEC, + .end = MX51_MXC_INT_FEC, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device mxc_fec_device = { + .name = "fec", + .id = 0, + .num_resources = ARRAY_SIZE(mxc_fec_resources), + .resource = mxc_fec_resources, +}; + +/* Dummy definition to allow compiling in AVIC and TZIC simultaneously */ +int __init mxc_register_gpios(void) +{ + return 0; +} diff --git a/arch/arm/mach-mx5/devices.h b/arch/arm/mach-mx5/devices.h new file mode 100644 index 00000000000..f339ab8c19b --- /dev/null +++ b/arch/arm/mach-mx5/devices.h @@ -0,0 +1,4 @@ +extern struct platform_device mxc_uart_device0; +extern struct platform_device mxc_uart_device1; +extern struct platform_device mxc_uart_device2; +extern struct platform_device mxc_fec_device; diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c new file mode 100644 index 00000000000..c21e18be7af --- /dev/null +++ b/arch/arm/mach-mx5/mm.c @@ -0,0 +1,89 @@ +/* + * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + * + * Create static mapping between physical to virtual memory. + */ + +#include <linux/mm.h> +#include <linux/init.h> + +#include <asm/mach/map.h> + +#include <mach/hardware.h> +#include <mach/common.h> +#include <mach/iomux-v3.h> + +/* + * Define the MX51 memory map. + */ +static struct map_desc mxc_io_desc[] __initdata = { + { + .virtual = MX51_IRAM_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MX51_IRAM_BASE_ADDR), + .length = MX51_IRAM_SIZE, + .type = MT_DEVICE + }, { + .virtual = MX51_DEBUG_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MX51_DEBUG_BASE_ADDR), + .length = MX51_DEBUG_SIZE, + .type = MT_DEVICE + }, { + .virtual = MX51_TZIC_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MX51_TZIC_BASE_ADDR), + .length = MX51_TZIC_SIZE, + .type = MT_DEVICE + }, { + .virtual = MX51_AIPS1_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MX51_AIPS1_BASE_ADDR), + .length = MX51_AIPS1_SIZE, + .type = MT_DEVICE + }, { + .virtual = MX51_SPBA0_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MX51_SPBA0_BASE_ADDR), + .length = MX51_SPBA0_SIZE, + .type = MT_DEVICE + }, { + .virtual = MX51_AIPS2_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MX51_AIPS2_BASE_ADDR), + .length = MX51_AIPS2_SIZE, + .type = MT_DEVICE + }, { + .virtual = MX51_NFC_AXI_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MX51_NFC_AXI_BASE_ADDR), + .length = MX51_NFC_AXI_SIZE, + .type = MT_DEVICE + }, +}; + +/* + * This function initializes the memory map. It is called during the + * system startup to create static physical to virtual memory mappings + * for the IO modules. + */ +void __init mx51_map_io(void) +{ + u32 tzic_addr; + + if (mx51_revision() < MX51_CHIP_REV_2_0) + tzic_addr = 0x8FFFC000; + else + tzic_addr = 0xE0003000; + mxc_io_desc[2].pfn = __phys_to_pfn(tzic_addr); + + mxc_set_cpu_type(MXC_CPU_MX51); + mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR)); + mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG_BASE_ADDR)); + iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); +} + +void __init mx51_init_irq(void) +{ + tzic_init_irq(MX51_IO_ADDRESS(MX51_TZIC_BASE_ADDR)); +} diff --git a/arch/arm/mach-mxc91231/magx-zn5.c b/arch/arm/mach-mxc91231/magx-zn5.c index 7dbe4ca12ef..69816ba8293 100644 --- a/arch/arm/mach-mxc91231/magx-zn5.c +++ b/arch/arm/mach-mxc91231/magx-zn5.c @@ -55,7 +55,7 @@ struct sys_timer zn5_timer = { MACHINE_START(MAGX_ZN5, "Motorola Zn5") .phys_io = MXC91231_AIPS1_BASE_ADDR, .io_pg_offst = ((MXC91231_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x100, + .boot_params = MXC91231_PHYS_OFFSET + 0x100, .map_io = mxc91231_map_io, .init_irq = mxc91231_init_irq, .timer = &zn5_timer, diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index c3d513cad5a..905719a677a 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -57,6 +57,13 @@ config MACH_LINKSTATION_MINI Say 'Y' here if you want your kernel to support the Buffalo Linkstation Mini platform. +config MACH_LINKSTATION_LS_HGL + bool "Buffalo Linkstation LS-HGL" + select I2C_BOARDINFO + help + Say 'Y' here if you want your kernel to support the + Buffalo Linkstation LS-HGL platform. + config MACH_TS409 bool "QNAP TS-409" help diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile index 89772fcd65c..eb6eabcb41e 100644 --- a/arch/arm/mach-orion5x/Makefile +++ b/arch/arm/mach-orion5x/Makefile @@ -5,6 +5,7 @@ obj-$(CONFIG_MACH_KUROBOX_PRO) += kurobox_pro-setup.o obj-$(CONFIG_MACH_TERASTATION_PRO2) += terastation_pro2-setup.o obj-$(CONFIG_MACH_LINKSTATION_PRO) += kurobox_pro-setup.o obj-$(CONFIG_MACH_LINKSTATION_MINI) += lsmini-setup.o +obj-$(CONFIG_MACH_LINKSTATION_LS_HGL) += ls_hgl-setup.o obj-$(CONFIG_MACH_DNS323) += dns323-setup.o obj-$(CONFIG_MACH_TS209) += ts209-setup.o tsx09-common.o obj-$(CONFIG_MACH_TS409) += ts409-setup.o tsx09-common.o diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index f87fa125380..8dc2c76d226 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -488,7 +488,7 @@ static struct platform_device orion5x_xor0_channel = { .dev = { .dma_mask = &orion5x_xor_dmamask, .coherent_dma_mask = DMA_BIT_MASK(64), - .platform_data = (void *)&orion5x_xor0_data, + .platform_data = &orion5x_xor0_data, }, }; @@ -514,7 +514,7 @@ static struct platform_device orion5x_xor1_channel = { .dev = { .dma_mask = &orion5x_xor_dmamask, .coherent_dma_mask = DMA_BIT_MASK(64), - .platform_data = (void *)&orion5x_xor1_data, + .platform_data = &orion5x_xor1_data, }, }; diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c index 9d4bf763f25..7130904ad99 100644 --- a/arch/arm/mach-orion5x/d2net-setup.c +++ b/arch/arm/mach-orion5x/d2net-setup.c @@ -149,10 +149,7 @@ static void __init d2net_sata_power_init(void) /* * The blue front LED is wired to the CPLD and can blink in relation with the - * SATA activity. This feature is disabled to make this LED compatible with - * the leds-gpio driver: MPP14 and MPP15 are configured to act like output - * GPIO's and have to stay in an active state. This is needed to set the blue - * LED in a "fix on" state regardless of the SATA activity. + * SATA activity. * * The following array detail the different LED registers and the combination * of their possible values: @@ -171,12 +168,11 @@ static void __init d2net_sata_power_init(void) #define D2NET_GPIO_RED_LED 6 #define D2NET_GPIO_BLUE_LED_BLINK_CTRL 16 #define D2NET_GPIO_BLUE_LED_OFF 23 -#define D2NET_GPIO_SATA0_ACT 14 -#define D2NET_GPIO_SATA1_ACT 15 static struct gpio_led d2net_leds[] = { { - .name = "d2net:blue:power", + .name = "d2net:blue:sata", + .default_trigger = "default-on", .gpio = D2NET_GPIO_BLUE_LED_OFF, .active_low = 1, }, @@ -201,25 +197,22 @@ static struct platform_device d2net_gpio_leds = { static void __init d2net_gpio_leds_init(void) { + int err; + /* Configure GPIO over MPP max number. */ orion_gpio_set_valid(D2NET_GPIO_BLUE_LED_OFF, 1); - if (gpio_request(D2NET_GPIO_SATA0_ACT, "LED SATA0 activity") != 0) - return; - if (gpio_direction_output(D2NET_GPIO_SATA0_ACT, 1) != 0) - goto err_free_1; - if (gpio_request(D2NET_GPIO_SATA1_ACT, "LED SATA1 activity") != 0) - goto err_free_1; - if (gpio_direction_output(D2NET_GPIO_SATA1_ACT, 1) != 0) - goto err_free_2; - platform_device_register(&d2net_gpio_leds); - return; + /* Configure register blink_ctrl to allow SATA activity LED blinking. */ + err = gpio_request(D2NET_GPIO_BLUE_LED_BLINK_CTRL, "blue LED blink"); + if (err == 0) { + err = gpio_direction_output(D2NET_GPIO_BLUE_LED_BLINK_CTRL, 1); + if (err) + gpio_free(D2NET_GPIO_BLUE_LED_BLINK_CTRL); + } + if (err) + pr_err("d2net: failed to configure blue LED blink GPIO\n"); -err_free_2: - gpio_free(D2NET_GPIO_SATA1_ACT); -err_free_1: - gpio_free(D2NET_GPIO_SATA0_ACT); - return; + platform_device_register(&d2net_gpio_leds); } /**************************************************************************** @@ -289,8 +282,8 @@ static struct orion5x_mpp_mode d2net_mpp_modes[] __initdata = { { 11, MPP_UNUSED }, { 12, MPP_GPIO }, /* SATA 1 power */ { 13, MPP_UNUSED }, - { 14, MPP_GPIO }, /* SATA 0 active */ - { 15, MPP_GPIO }, /* SATA 1 active */ + { 14, MPP_SATA_LED }, /* SATA 0 active */ + { 15, MPP_SATA_LED }, /* SATA 1 active */ { 16, MPP_GPIO }, /* Blue front LED blink control */ { 17, MPP_UNUSED }, { 18, MPP_GPIO }, /* Front button (0 = Released, 1 = Pushed ) */ @@ -301,6 +294,8 @@ static struct orion5x_mpp_mode d2net_mpp_modes[] __initdata = { /* 24: Inhibit board power off (0 = Disabled, 1 = Enabled) */ }; +#define D2NET_GPIO_INHIBIT_POWER_OFF 24 + static void __init d2net_init(void) { /* @@ -333,6 +328,8 @@ static void __init d2net_init(void) i2c_register_board_info(0, d2net_i2c_devices, ARRAY_SIZE(d2net_i2c_devices)); + + orion_gpio_set_valid(D2NET_GPIO_INHIBIT_POWER_OFF, 1); } /* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */ diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index 8f159db4d08..421b82f7c63 100644 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -34,7 +34,8 @@ #define DNS323_GPIO_LED_RIGHT_AMBER 1 #define DNS323_GPIO_LED_LEFT_AMBER 2 #define DNS323_GPIO_SYSTEM_UP 3 -#define DNS323_GPIO_LED_POWER 5 +#define DNS323_GPIO_LED_POWER1 4 +#define DNS323_GPIO_LED_POWER2 5 #define DNS323_GPIO_OVERTEMP 6 #define DNS323_GPIO_RTC 7 #define DNS323_GPIO_POWER_OFF 8 @@ -237,11 +238,31 @@ error_fail: * GPIO LEDs (simple - doesn't use hardware blinking support) */ +#define ORION_BLINK_HALF_PERIOD 100 /* ms */ + +static int dns323_gpio_blink_set(unsigned gpio, + unsigned long *delay_on, unsigned long *delay_off) +{ + static int value = 0; + + if (!*delay_on && !*delay_off) + *delay_on = *delay_off = ORION_BLINK_HALF_PERIOD; + + if (ORION_BLINK_HALF_PERIOD == *delay_on + && ORION_BLINK_HALF_PERIOD == *delay_off) { + value = !value; + orion_gpio_set_blink(gpio, value); + return 0; + } + + return -EINVAL; +} + static struct gpio_led dns323_leds[] = { { .name = "power:blue", - .gpio = DNS323_GPIO_LED_POWER, - .default_state = LEDS_GPIO_DEFSTATE_ON, + .gpio = DNS323_GPIO_LED_POWER2, + .default_trigger = "timer", }, { .name = "right:amber", .gpio = DNS323_GPIO_LED_RIGHT_AMBER, @@ -256,6 +277,7 @@ static struct gpio_led dns323_leds[] = { static struct gpio_led_platform_data dns323_led_data = { .num_leds = ARRAY_SIZE(dns323_leds), .leds = dns323_leds, + .gpio_blink_set = dns323_gpio_blink_set, }; static struct platform_device dns323_gpio_leds = { @@ -412,6 +434,14 @@ static void __init dns323_init(void) orion5x_setup_dev_boot_win(DNS323_NOR_BOOT_BASE, DNS323_NOR_BOOT_SIZE); platform_device_register(&dns323_nor_flash); + /* The 5181 power LED is active low and requires + * DNS323_GPIO_LED_POWER1 to also be low. + */ + if (dns323_dev_id() == MV88F5181_DEV_ID) { + dns323_leds[0].active_low = 1; + gpio_direction_output(DNS323_GPIO_LED_POWER1, 0); + } + platform_device_register(&dns323_gpio_leds); platform_device_register(&dns323_button_device); diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c new file mode 100644 index 00000000000..8e569be6e2c --- /dev/null +++ b/arch/arm/mach-orion5x/ls_hgl-setup.c @@ -0,0 +1,276 @@ +/* + * arch/arm/mach-orion5x/ls_hgl-setup.c + * + * Maintainer: Zhu Qingsen <zhuqs@cn.fujitsu.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/physmap.h> +#include <linux/mv643xx_eth.h> +#include <linux/leds.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> +#include <linux/i2c.h> +#include <linux/ata_platform.h> +#include <linux/gpio.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/system.h> +#include <mach/orion5x.h> +#include "common.h" +#include "mpp.h" + +/***************************************************************************** + * Linkstation LS-HGL Info + ****************************************************************************/ + +/* + * 256K NOR flash Device bus boot chip select + */ + +#define LS_HGL_NOR_BOOT_BASE 0xf4000000 +#define LS_HGL_NOR_BOOT_SIZE SZ_256K + +/***************************************************************************** + * 256KB NOR Flash on BOOT Device + ****************************************************************************/ + +static struct physmap_flash_data ls_hgl_nor_flash_data = { + .width = 1, +}; + +static struct resource ls_hgl_nor_flash_resource = { + .flags = IORESOURCE_MEM, + .start = LS_HGL_NOR_BOOT_BASE, + .end = LS_HGL_NOR_BOOT_BASE + LS_HGL_NOR_BOOT_SIZE - 1, +}; + +static struct platform_device ls_hgl_nor_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &ls_hgl_nor_flash_data, + }, + .num_resources = 1, + .resource = &ls_hgl_nor_flash_resource, +}; + +/***************************************************************************** + * Ethernet + ****************************************************************************/ + +static struct mv643xx_eth_platform_data ls_hgl_eth_data = { + .phy_addr = 8, +}; + +/***************************************************************************** + * RTC 5C372a on I2C bus + ****************************************************************************/ + +static struct i2c_board_info __initdata ls_hgl_i2c_rtc = { + I2C_BOARD_INFO("rs5c372a", 0x32), +}; + +/***************************************************************************** + * LEDs attached to GPIO + ****************************************************************************/ + +#define LS_HGL_GPIO_LED_ALARM 2 +#define LS_HGL_GPIO_LED_INFO 3 +#define LS_HGL_GPIO_LED_FUNC 17 +#define LS_HGL_GPIO_LED_PWR 0 + + +static struct gpio_led ls_hgl_led_pins[] = { + { + .name = "alarm:red", + .gpio = LS_HGL_GPIO_LED_ALARM, + .active_low = 1, + }, { + .name = "info:amber", + .gpio = LS_HGL_GPIO_LED_INFO, + .active_low = 1, + }, { + .name = "func:blue:top", + .gpio = LS_HGL_GPIO_LED_FUNC, + .active_low = 1, + }, { + .name = "power:blue:bottom", + .gpio = LS_HGL_GPIO_LED_PWR, + }, +}; + +static struct gpio_led_platform_data ls_hgl_led_data = { + .leds = ls_hgl_led_pins, + .num_leds = ARRAY_SIZE(ls_hgl_led_pins), +}; + +static struct platform_device ls_hgl_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &ls_hgl_led_data, + }, +}; + +/**************************************************************************** + * GPIO Attached Keys + ****************************************************************************/ +#define LS_HGL_GPIO_KEY_FUNC 15 +#define LS_HGL_GPIO_KEY_POWER 8 +#define LS_HGL_GPIO_KEY_AUTOPOWER 10 + +#define LS_HGL_SW_POWER 0x00 +#define LS_HGL_SW_AUTOPOWER 0x01 + +static struct gpio_keys_button ls_hgl_buttons[] = { + { + .code = KEY_OPTION, + .gpio = LS_HGL_GPIO_KEY_FUNC, + .desc = "Function Button", + .active_low = 1, + }, { + .type = EV_SW, + .code = LS_HGL_SW_POWER, + .gpio = LS_HGL_GPIO_KEY_POWER, + .desc = "Power-on Switch", + .active_low = 1, + }, { + .type = EV_SW, + .code = LS_HGL_SW_AUTOPOWER, + .gpio = LS_HGL_GPIO_KEY_AUTOPOWER, + .desc = "Power-auto Switch", + .active_low = 1, + }, +}; + +static struct gpio_keys_platform_data ls_hgl_button_data = { + .buttons = ls_hgl_buttons, + .nbuttons = ARRAY_SIZE(ls_hgl_buttons), +}; + +static struct platform_device ls_hgl_button_device = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &ls_hgl_button_data, + }, +}; + + +/***************************************************************************** + * SATA + ****************************************************************************/ +static struct mv_sata_platform_data ls_hgl_sata_data = { + .n_ports = 2, +}; + + +/***************************************************************************** + * Linkstation LS-HGL specific power off method: reboot + ****************************************************************************/ +/* + * On the Linkstation LS-HGL, the shutdown process is following: + * - Userland monitors key events until the power switch goes to off position + * - The board reboots + * - U-boot starts and goes into an idle mode waiting for the user + * to move the switch to ON position + */ + +static void ls_hgl_power_off(void) +{ + arm_machine_restart('h', NULL); +} + + +/***************************************************************************** + * General Setup + ****************************************************************************/ + +#define LS_HGL_GPIO_USB_POWER 9 +#define LS_HGL_GPIO_AUTO_POWER 10 +#define LS_HGL_GPIO_POWER 8 + +#define LS_HGL_GPIO_HDD_POWER 1 + +static struct orion5x_mpp_mode ls_hgl_mpp_modes[] __initdata = { + { 0, MPP_GPIO }, /* LED_PWR */ + { 1, MPP_GPIO }, /* HDD_PWR */ + { 2, MPP_GPIO }, /* LED_ALARM */ + { 3, MPP_GPIO }, /* LED_INFO */ + { 4, MPP_UNUSED }, + { 5, MPP_UNUSED }, + { 6, MPP_GPIO }, /* FAN_LCK */ + { 7, MPP_GPIO }, /* INIT */ + { 8, MPP_GPIO }, /* POWER */ + { 9, MPP_GPIO }, /* USB_PWR */ + { 10, MPP_GPIO }, /* AUTO_POWER */ + { 11, MPP_UNUSED }, /* LED_ETH (dummy) */ + { 12, MPP_UNUSED }, + { 13, MPP_UNUSED }, + { 14, MPP_UNUSED }, + { 15, MPP_GPIO }, /* FUNC */ + { 16, MPP_UNUSED }, + { 17, MPP_GPIO }, /* LED_FUNC */ + { 18, MPP_UNUSED }, + { 19, MPP_UNUSED }, + { -1 }, +}; + +static void __init ls_hgl_init(void) +{ + /* + * Setup basic Orion functions. Need to be called early. + */ + orion5x_init(); + + orion5x_mpp_conf(ls_hgl_mpp_modes); + + /* + * Configure peripherals. + */ + orion5x_ehci0_init(); + orion5x_ehci1_init(); + orion5x_eth_init(&ls_hgl_eth_data); + orion5x_i2c_init(); + orion5x_sata_init(&ls_hgl_sata_data); + orion5x_uart0_init(); + orion5x_xor_init(); + + orion5x_setup_dev_boot_win(LS_HGL_NOR_BOOT_BASE, + LS_HGL_NOR_BOOT_SIZE); + platform_device_register(&ls_hgl_nor_flash); + + platform_device_register(&ls_hgl_button_device); + + platform_device_register(&ls_hgl_leds); + + i2c_register_board_info(0, &ls_hgl_i2c_rtc, 1); + + /* enable USB power */ + gpio_set_value(LS_HGL_GPIO_USB_POWER, 1); + + /* register power-off method */ + pm_power_off = ls_hgl_power_off; + + pr_info("%s: finished\n", __func__); +} + +MACHINE_START(LINKSTATION_LS_HGL, "Buffalo Linkstation LS-HGL") + /* Maintainer: Zhu Qingsen <zhuqs@cn.fujistu.com> */ + .phys_io = ORION5X_REGS_PHYS_BASE, + .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, + .boot_params = 0x00000100, + .init_machine = ls_hgl_init, + .map_io = orion5x_map_io, + .init_irq = orion5x_init_irq, + .timer = &orion5x_timer, + .fixup = tag_fixup_mem32, +MACHINE_END diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c index c9bf6b81a80..c704f056de1 100644 --- a/arch/arm/mach-orion5x/lsmini-setup.c +++ b/arch/arm/mach-orion5x/lsmini-setup.c @@ -11,7 +11,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/pci.h> #include <linux/mtd/physmap.h> #include <linux/mv643xx_eth.h> #include <linux/leds.h> @@ -19,12 +18,13 @@ #include <linux/input.h> #include <linux/i2c.h> #include <linux/ata_platform.h> -#include <asm/mach-types.h> #include <linux/gpio.h> +#include <asm/mach-types.h> #include <asm/mach/arch.h> +#include <asm/system.h> +#include <mach/orion5x.h> #include "common.h" #include "mpp.h" -#include "include/mach/system.h" /***************************************************************************** * Linkstation Mini Info @@ -186,7 +186,7 @@ static struct mv_sata_platform_data lsmini_sata_data = { static void lsmini_power_off(void) { - arch_reset(0, NULL); + arm_machine_restart('h', NULL); } diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index dee92182749..38fbd0a0e40 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -115,6 +115,11 @@ config MACH_CM_X300 select CPU_PXA310 select HAVE_PWM +config MACH_CAPC7117 + bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM" + select CPU_PXA320 + select PXA3xx + config ARCH_GUMSTIX bool "Gumstix XScale 255 boards" select PXA25x @@ -417,6 +422,24 @@ config MACH_TREO680 Say Y here if you intend to run this kernel on Palm Treo 680 smartphone. +config MACH_RAUMFELD_RC + bool "Raumfeld Controller" + select PXA3xx + select CPU_PXA300 + select HAVE_PWM + +config MACH_RAUMFELD_CONNECTOR + bool "Raumfeld Connector" + select PXA3xx + select CPU_PXA300 + select PXA_SSP + +config MACH_RAUMFELD_SPEAKER + bool "Raumfeld Speaker" + select PXA3xx + select CPU_PXA300 + select PXA_SSP + config PXA_SHARPSL bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models" select SHARP_SCOOP @@ -435,6 +458,7 @@ config SHARPSL_PM config CORGI_SSP_DEPRECATED bool select PXA_SSP + select PXA_SSP_LEGACY help This option will include corgi_ssp.c and corgi_lcd.c that corgi_ts.c and other legacy drivers (corgi_bl.c @@ -446,6 +470,7 @@ config MACH_POODLE select PXA25x select SHARP_LOCOMO select PXA_SSP + select PXA_HAVE_BOARD_IRQS config MACH_CORGI bool "Enable Sharp SL-C700 (Corgi) Support" @@ -492,6 +517,11 @@ config MACH_TOSA select PXA25x select PXA_HAVE_BOARD_IRQS +config MACH_ICONTROL + bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM" + select CPU_PXA320 + select PXA3xx + config ARCH_PXA_ESERIES bool "PXA based Toshiba e-series PDAs" select PXA25x @@ -629,6 +659,11 @@ config PXA_SSP help Enable support for PXA2xx SSP ports +config PXA_SSP_LEGACY + bool + help + Support of legacy SSP API + config TOSA_BT tristate "Control the state of built-in bluetooth chip on Sharp SL-6000" depends on MACH_TOSA diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index f64afda7e6f..86bc87b7f2d 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -48,6 +48,7 @@ obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx-pci.o endif obj-$(CONFIG_MACH_EM_X270) += em-x270.o obj-$(CONFIG_MACH_CM_X300) += cm-x300.o +obj-$(CONFIG_MACH_CAPC7117) += capc7117.o mxm8x10.o obj-$(CONFIG_ARCH_GUMSTIX) += gumstix.o obj-$(CONFIG_GUMSTIX_AM200EPD) += am200epd.o obj-$(CONFIG_GUMSTIX_AM300EPD) += am300epd.o @@ -82,6 +83,7 @@ obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o sharpsl_pm.o spitz_pm.o obj-$(CONFIG_CORGI_SSP_DEPRECATED) += corgi_ssp.o corgi_lcd.o obj-$(CONFIG_MACH_POODLE) += poodle.o obj-$(CONFIG_MACH_TOSA) += tosa.o +obj-$(CONFIG_MACH_ICONTROL) += icontrol.o mxm8x10.o obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o obj-$(CONFIG_MACH_E330) += e330.o obj-$(CONFIG_MACH_E350) += e350.o @@ -89,6 +91,9 @@ obj-$(CONFIG_MACH_E740) += e740.o obj-$(CONFIG_MACH_E750) += e750.o obj-$(CONFIG_MACH_E400) += e400.o obj-$(CONFIG_MACH_E800) += e800.o +obj-$(CONFIG_MACH_RAUMFELD_RC) += raumfeld.o +obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR) += raumfeld.o +obj-$(CONFIG_MACH_RAUMFELD_SPEAKER) += raumfeld.o # Support for blinky lights led-y := leds.o diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c index b8cd07ca938..f3b5ace815e 100644 --- a/arch/arm/mach-pxa/balloon3.c +++ b/arch/arm/mach-pxa/balloon3.c @@ -132,6 +132,14 @@ static void __init balloon3_init_irq(void) "enabled\n", __func__, BALLOON3_AUX_NIRQ); } +static unsigned long balloon3_ac97_pin_config[] = { + GPIO28_AC97_BITCLK, + GPIO29_AC97_SDATA_IN_0, + GPIO30_AC97_SDATA_OUT, + GPIO31_AC97_SYNC, + GPIO113_AC97_nRESET, +}; + static void balloon3_backlight_power(int on) { pr_debug("%s: power is %s\n", __func__, on ? "on" : "off"); @@ -140,26 +148,7 @@ static void balloon3_backlight_power(int on) static unsigned long balloon3_lcd_pin_config[] = { /* LCD - 16bpp Active TFT */ - GPIO58_LCD_LDD_0, - GPIO59_LCD_LDD_1, - GPIO60_LCD_LDD_2, - GPIO61_LCD_LDD_3, - GPIO62_LCD_LDD_4, - GPIO63_LCD_LDD_5, - GPIO64_LCD_LDD_6, - GPIO65_LCD_LDD_7, - GPIO66_LCD_LDD_8, - GPIO67_LCD_LDD_9, - GPIO68_LCD_LDD_10, - GPIO69_LCD_LDD_11, - GPIO70_LCD_LDD_12, - GPIO71_LCD_LDD_13, - GPIO72_LCD_LDD_14, - GPIO73_LCD_LDD_15, - GPIO74_LCD_FCLK, - GPIO75_LCD_LCLK, - GPIO76_LCD_PCLK, - GPIO77_LCD_BIAS, + GPIOxx_LCD_TFT_16BPP, GPIO99_GPIO, /* Backlight */ }; @@ -311,8 +300,10 @@ static void __init balloon3_init(void) pxa_set_stuart_info(NULL); pxa_set_i2c_info(NULL); - if (balloon3_has(BALLOON3_FEATURE_AUDIO)) + if (balloon3_has(BALLOON3_FEATURE_AUDIO)) { + pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_ac97_pin_config)); pxa_set_ac97_info(NULL); + } if (balloon3_has(BALLOON3_FEATURE_TOPPOLY)) { pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_lcd_pin_config)); diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c new file mode 100644 index 00000000000..aae544631a8 --- /dev/null +++ b/arch/arm/mach-pxa/capc7117.c @@ -0,0 +1,158 @@ +/* + * linux/arch/arm/mach-pxa/capc7117.c + * + * Support for the Embedian CAPC-7117 Evaluation Kit + * based on the Embedian MXM-8x10 Computer on Module + * + * Copyright (C) 2009 Embedian Inc. + * Copyright (C) 2009 TMT Services & Supplies (Pty) Ltd. + * + * 2007-09-04: eric miao <eric.y.miao@gmail.com> + * rewrite to align with latest kernel + * + * 2010-01-09: Edwin Peer <epeer@tmtservices.co.za> + * Hennie van der Merwe <hvdmerwe@tmtservices.co.za> + * rework for upstream merge + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/irq.h> +#include <linux/platform_device.h> +#include <linux/ata_platform.h> +#include <linux/serial_8250.h> +#include <linux/gpio.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +#include <mach/pxa320.h> +#include <mach/mxm8x10.h> + +#include "generic.h" + +/* IDE (PATA) Support */ +static struct pata_platform_info pata_platform_data = { + .ioport_shift = 1 +}; + +static struct resource capc7117_ide_resources[] = { + [0] = { + .start = 0x11000020, + .end = 0x1100003f, + .flags = IORESOURCE_MEM + }, + [1] = { + .start = 0x1100001c, + .end = 0x1100001c, + .flags = IORESOURCE_MEM + }, + [2] = { + .start = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO76)), + .end = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO76)), + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING + } +}; + +static struct platform_device capc7117_ide_device = { + .name = "pata_platform", + .num_resources = ARRAY_SIZE(capc7117_ide_resources), + .resource = capc7117_ide_resources, + .dev = { + .platform_data = &pata_platform_data, + .coherent_dma_mask = ~0 /* grumble */ + } +}; + +static void __init capc7117_ide_init(void) +{ + platform_device_register(&capc7117_ide_device); +} + +/* TI16C752 UART support */ +#define TI16C752_FLAGS (UPF_BOOT_AUTOCONF | \ + UPF_IOREMAP | \ + UPF_BUGGY_UART | \ + UPF_SKIP_TEST) +#define TI16C752_UARTCLK (22118400) +static struct plat_serial8250_port ti16c752_platform_data[] = { + [0] = { + .mapbase = 0x14000000, + .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO78)), + .irqflags = IRQF_TRIGGER_RISING, + .flags = TI16C752_FLAGS, + .iotype = UPIO_MEM, + .regshift = 1, + .uartclk = TI16C752_UARTCLK + }, + [1] = { + .mapbase = 0x14000040, + .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO79)), + .irqflags = IRQF_TRIGGER_RISING, + .flags = TI16C752_FLAGS, + .iotype = UPIO_MEM, + .regshift = 1, + .uartclk = TI16C752_UARTCLK + }, + [2] = { + .mapbase = 0x14000080, + .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO80)), + .irqflags = IRQF_TRIGGER_RISING, + .flags = TI16C752_FLAGS, + .iotype = UPIO_MEM, + .regshift = 1, + .uartclk = TI16C752_UARTCLK + }, + [3] = { + .mapbase = 0x140000c0, + .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO81)), + .irqflags = IRQF_TRIGGER_RISING, + .flags = TI16C752_FLAGS, + .iotype = UPIO_MEM, + .regshift = 1, + .uartclk = TI16C752_UARTCLK + }, + [4] = { + /* end of array */ + } +}; + +static struct platform_device ti16c752_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = ti16c752_platform_data + } +}; + +static void __init capc7117_uarts_init(void) +{ + platform_device_register(&ti16c752_device); +} + +static void __init capc7117_init(void) +{ + /* Init CoM */ + mxm_8x10_barebones_init(); + + /* Init evaluation board peripherals */ + mxm_8x10_ac97_init(); + mxm_8x10_usb_host_init(); + mxm_8x10_mmc_init(); + + capc7117_uarts_init(); + capc7117_ide_init(); +} + +MACHINE_START(CAPC7117, + "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM") + .phys_io = 0x40000000, + .boot_params = 0xa0000100, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .map_io = pxa_map_io, + .init_irq = pxa3xx_init_irq, + .timer = &pxa_timer, + .init_machine = capc7117_init +MACHINE_END diff --git a/arch/arm/mach-pxa/cm-x255.c b/arch/arm/mach-pxa/cm-x255.c index 253fd76142d..f1a7703d771 100644 --- a/arch/arm/mach-pxa/cm-x255.c +++ b/arch/arm/mach-pxa/cm-x255.c @@ -50,26 +50,7 @@ static unsigned long cmx255_pin_config[] = { GPIO47_STUART_TXD, /* LCD */ - GPIO58_LCD_LDD_0, - GPIO59_LCD_LDD_1, - GPIO60_LCD_LDD_2, - GPIO61_LCD_LDD_3, - GPIO62_LCD_LDD_4, - GPIO63_LCD_LDD_5, - GPIO64_LCD_LDD_6, - GPIO65_LCD_LDD_7, - GPIO66_LCD_LDD_8, - GPIO67_LCD_LDD_9, - GPIO68_LCD_LDD_10, - GPIO69_LCD_LDD_11, - GPIO70_LCD_LDD_12, - GPIO71_LCD_LDD_13, - GPIO72_LCD_LDD_14, - GPIO73_LCD_LDD_15, - GPIO74_LCD_FCLK, - GPIO75_LCD_LCLK, - GPIO76_LCD_PCLK, - GPIO77_LCD_BIAS, + GPIOxx_LCD_TFT_16BPP, /* SSP1 */ GPIO23_SSP1_SCLK, diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c index eea78b6c2bc..a9926bb7592 100644 --- a/arch/arm/mach-pxa/cm-x270.c +++ b/arch/arm/mach-pxa/cm-x270.c @@ -71,26 +71,7 @@ static unsigned long cmx270_pin_config[] = { GPIO111_MMC_DAT_3, /* LCD */ - GPIO58_LCD_LDD_0, - GPIO59_LCD_LDD_1, - GPIO60_LCD_LDD_2, - GPIO61_LCD_LDD_3, - GPIO62_LCD_LDD_4, - GPIO63_LCD_LDD_5, - GPIO64_LCD_LDD_6, - GPIO65_LCD_LDD_7, - GPIO66_LCD_LDD_8, - GPIO67_LCD_LDD_9, - GPIO68_LCD_LDD_10, - GPIO69_LCD_LDD_11, - GPIO70_LCD_LDD_12, - GPIO71_LCD_LDD_13, - GPIO72_LCD_LDD_14, - GPIO73_LCD_LDD_15, - GPIO74_LCD_FCLK, - GPIO75_LCD_LCLK, - GPIO76_LCD_PCLK, - GPIO77_LCD_BIAS, + GPIOxx_LCD_TFT_16BPP, /* I2C */ GPIO117_I2C_SCL, @@ -195,33 +176,57 @@ static struct resource cmx270_2700G_resource[] = { }, }; -static unsigned long save_lcd_regs[10]; +static unsigned long cmx270_marathon_on[] = { + GPIO58_GPIO, + GPIO59_GPIO, + GPIO60_GPIO, + GPIO61_GPIO, + GPIO62_GPIO, + GPIO63_GPIO, + GPIO64_GPIO, + GPIO65_GPIO, + GPIO66_GPIO, + GPIO67_GPIO, + GPIO68_GPIO, + GPIO69_GPIO, + GPIO70_GPIO, + GPIO71_GPIO, + GPIO72_GPIO, + GPIO73_GPIO, + GPIO74_GPIO, + GPIO75_GPIO, + GPIO76_GPIO, + GPIO77_GPIO, +}; + +static unsigned long cmx270_marathon_off[] = { + GPIOxx_LCD_TFT_16BPP, +}; static int cmx270_marathon_probe(struct fb_info *fb) { - /* save PXA-270 pin settings before enabling 2700G */ - save_lcd_regs[0] = GPDR1; - save_lcd_regs[1] = GPDR2; - save_lcd_regs[2] = GAFR1_U; - save_lcd_regs[3] = GAFR2_L; - save_lcd_regs[4] = GAFR2_U; - - /* Disable PXA-270 on-chip controller driving pins */ - GPDR1 &= ~(0xfc000000); - GPDR2 &= ~(0x00c03fff); - GAFR1_U &= ~(0xfff00000); - GAFR2_L &= ~(0x0fffffff); - GAFR2_U &= ~(0x0000f000); + int gpio, err; + + for (gpio = 58; gpio <= 77; gpio++) { + err = gpio_request(gpio, "LCD"); + if (err) + return err; + gpio_direction_input(gpio); + } + + pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_marathon_on)); return 0; } static int cmx270_marathon_remove(struct fb_info *fb) { - GPDR1 = save_lcd_regs[0]; - GPDR2 = save_lcd_regs[1]; - GAFR1_U = save_lcd_regs[2]; - GAFR2_L = save_lcd_regs[3]; - GAFR2_U = save_lcd_regs[4]; + int gpio; + + pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_marathon_off)); + + for (gpio = 58; gpio <= 77; gpio++) + gpio_free(gpio); + return 0; } diff --git a/arch/arm/mach-pxa/cm-x2xx-pci.c b/arch/arm/mach-pxa/cm-x2xx-pci.c index 7873fa3d8fa..161fc2d6120 100644 --- a/arch/arm/mach-pxa/cm-x2xx-pci.c +++ b/arch/arm/mach-pxa/cm-x2xx-pci.c @@ -59,7 +59,7 @@ void __init cmx2xx_pci_adjust_zones(int node, unsigned long *zone_size, static void cmx2xx_it8152_irq_demux(unsigned int irq, struct irq_desc *desc) { /* clear our parent irq */ - GEDR(cmx2xx_it8152_irq_gpio) = GPIO_bit(cmx2xx_it8152_irq_gpio); + desc->chip->ack(irq); it8152_irq_demux(irq, desc); } diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c index 94b23a9e387..d578021d1a1 100644 --- a/arch/arm/mach-pxa/e740.c +++ b/arch/arm/mach-pxa/e740.c @@ -134,6 +134,12 @@ static unsigned long e740_pin_config[] __initdata = { /* IrDA */ GPIO38_GPIO | MFP_LPM_DRIVE_HIGH, + /* AC97 */ + GPIO28_AC97_BITCLK, + GPIO29_AC97_SDATA_IN_0, + GPIO30_AC97_SDATA_OUT, + GPIO31_AC97_SYNC, + /* Audio power control */ GPIO16_GPIO, /* AC97 codec AVDD2 supply (analogue power) */ GPIO40_GPIO, /* Mic amp power */ diff --git a/arch/arm/mach-pxa/e750.c b/arch/arm/mach-pxa/e750.c index 5eccbce73a3..af83caa52dd 100644 --- a/arch/arm/mach-pxa/e750.c +++ b/arch/arm/mach-pxa/e750.c @@ -132,6 +132,12 @@ static unsigned long e750_pin_config[] __initdata = { /* IrDA */ GPIO38_GPIO | MFP_LPM_DRIVE_HIGH, + /* AC97 */ + GPIO28_AC97_BITCLK, + GPIO29_AC97_SDATA_IN_0, + GPIO30_AC97_SDATA_OUT, + GPIO31_AC97_SYNC, + /* Audio power control */ GPIO4_GPIO, /* Headphone amp power */ GPIO7_GPIO, /* Speaker amp power */ diff --git a/arch/arm/mach-pxa/e800.c b/arch/arm/mach-pxa/e800.c index aad129bed19..8ea97bf53fe 100644 --- a/arch/arm/mach-pxa/e800.c +++ b/arch/arm/mach-pxa/e800.c @@ -35,6 +35,14 @@ /* ------------------------ e800 LCD definitions ------------------------- */ +static unsigned long e800_pin_config[] __initdata = { + /* AC97 */ + GPIO28_AC97_BITCLK, + GPIO29_AC97_SDATA_IN_0, + GPIO30_AC97_SDATA_OUT, + GPIO31_AC97_SYNC, +}; + static struct w100_gen_regs e800_lcd_regs = { .lcd_format = 0x00008003, .lcdd_cntl1 = 0x02a00000, @@ -195,6 +203,7 @@ static struct platform_device *devices[] __initdata = { static void __init e800_init(void) { + pxa2xx_mfp_config(ARRAY_AND_SIZE(e800_pin_config)); pxa_set_ffuart_info(NULL); pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index c8a01bc85fd..aab04f33e49 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -109,26 +109,7 @@ static unsigned long common_pin_config[] = { GPIO111_MMC_DAT_3, /* LCD */ - GPIO58_LCD_LDD_0, - GPIO59_LCD_LDD_1, - GPIO60_LCD_LDD_2, - GPIO61_LCD_LDD_3, - GPIO62_LCD_LDD_4, - GPIO63_LCD_LDD_5, - GPIO64_LCD_LDD_6, - GPIO65_LCD_LDD_7, - GPIO66_LCD_LDD_8, - GPIO67_LCD_LDD_9, - GPIO68_LCD_LDD_10, - GPIO69_LCD_LDD_11, - GPIO70_LCD_LDD_12, - GPIO71_LCD_LDD_13, - GPIO72_LCD_LDD_14, - GPIO73_LCD_LDD_15, - GPIO74_LCD_FCLK, - GPIO75_LCD_LCLK, - GPIO76_LCD_PCLK, - GPIO77_LCD_BIAS, + GPIOxx_LCD_TFT_16BPP, /* QCI */ GPIO84_CIF_FV, diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c new file mode 100644 index 00000000000..771137fc1a8 --- /dev/null +++ b/arch/arm/mach-pxa/icontrol.c @@ -0,0 +1,202 @@ +/* + * linux/arch/arm/mach-pxa/icontrol.c + * + * Support for the iControl and SafeTcam platforms from TMT Services + * using the Embedian MXM-8x10 Computer on Module + * + * Copyright (C) 2009 TMT Services & Supplies (Pty) Ltd. + * + * 2010-01-21 Hennie van der Merve <hvdmerwe@tmtservies.co.za> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/irq.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +#include <mach/pxa320.h> +#include <mach/mxm8x10.h> + +#include <linux/spi/spi.h> +#include <mach/pxa2xx_spi.h> +#include <linux/can/platform/mcp251x.h> + +#include "generic.h" + +#define ICONTROL_MCP251x_nCS1 (15) +#define ICONTROL_MCP251x_nCS2 (16) +#define ICONTROL_MCP251x_nCS3 (17) +#define ICONTROL_MCP251x_nCS4 (24) + +#define ICONTROL_MCP251x_nIRQ1 (74) +#define ICONTROL_MCP251x_nIRQ2 (75) +#define ICONTROL_MCP251x_nIRQ3 (76) +#define ICONTROL_MCP251x_nIRQ4 (77) + +static struct pxa2xx_spi_chip mcp251x_chip_info1 = { + .tx_threshold = 8, + .rx_threshold = 128, + .dma_burst_size = 8, + .timeout = 235, + .gpio_cs = ICONTROL_MCP251x_nCS1 +}; + +static struct pxa2xx_spi_chip mcp251x_chip_info2 = { + .tx_threshold = 8, + .rx_threshold = 128, + .dma_burst_size = 8, + .timeout = 235, + .gpio_cs = ICONTROL_MCP251x_nCS2 +}; + +static struct pxa2xx_spi_chip mcp251x_chip_info3 = { + .tx_threshold = 8, + .rx_threshold = 128, + .dma_burst_size = 8, + .timeout = 235, + .gpio_cs = ICONTROL_MCP251x_nCS3 +}; + +static struct pxa2xx_spi_chip mcp251x_chip_info4 = { + .tx_threshold = 8, + .rx_threshold = 128, + .dma_burst_size = 8, + .timeout = 235, + .gpio_cs = ICONTROL_MCP251x_nCS4 +}; + +static struct mcp251x_platform_data mcp251x_info = { + .oscillator_frequency = 16E6, + .model = CAN_MCP251X_MCP2515, + .board_specific_setup = NULL, + .power_enable = NULL, + .transceiver_enable = NULL +}; + +static struct spi_board_info mcp251x_board_info[] = { + { + .modalias = "mcp251x", + .max_speed_hz = 6500000, + .bus_num = 3, + .chip_select = 0, + .platform_data = &mcp251x_info, + .controller_data = &mcp251x_chip_info1, + .irq = gpio_to_irq(ICONTROL_MCP251x_nIRQ1) + }, + { + .modalias = "mcp251x", + .max_speed_hz = 6500000, + .bus_num = 3, + .chip_select = 1, + .platform_data = &mcp251x_info, + .controller_data = &mcp251x_chip_info2, + .irq = gpio_to_irq(ICONTROL_MCP251x_nIRQ2) + }, + { + .modalias = "mcp251x", + .max_speed_hz = 6500000, + .bus_num = 4, + .chip_select = 0, + .platform_data = &mcp251x_info, + .controller_data = &mcp251x_chip_info3, + .irq = gpio_to_irq(ICONTROL_MCP251x_nIRQ3) + }, + { + .modalias = "mcp251x", + .max_speed_hz = 6500000, + .bus_num = 4, + .chip_select = 1, + .platform_data = &mcp251x_info, + .controller_data = &mcp251x_chip_info4, + .irq = gpio_to_irq(ICONTROL_MCP251x_nIRQ4) + } +}; + +static struct pxa2xx_spi_master pxa_ssp3_spi_master_info = { + .clock_enable = CKEN_SSP3, + .num_chipselect = 2, + .enable_dma = 1 +}; + +static struct pxa2xx_spi_master pxa_ssp4_spi_master_info = { + .clock_enable = CKEN_SSP4, + .num_chipselect = 2, + .enable_dma = 1 +}; + +struct platform_device pxa_spi_ssp3 = { + .name = "pxa2xx-spi", + .id = 3, + .dev = { + .platform_data = &pxa_ssp3_spi_master_info, + } +}; + +struct platform_device pxa_spi_ssp4 = { + .name = "pxa2xx-spi", + .id = 4, + .dev = { + .platform_data = &pxa_ssp4_spi_master_info, + } +}; + +static struct platform_device *icontrol_spi_devices[] __initdata = { + &pxa_spi_ssp3, + &pxa_spi_ssp4, +}; + +static mfp_cfg_t mfp_can_cfg[] __initdata = { + /* CAN CS lines */ + GPIO15_GPIO, + GPIO16_GPIO, + GPIO17_GPIO, + GPIO24_GPIO, + + /* SPI (SSP3) lines */ + GPIO89_SSP3_SCLK, + GPIO91_SSP3_TXD, + GPIO92_SSP3_RXD, + + /* SPI (SSP4) lines */ + GPIO93_SSP4_SCLK, + GPIO95_SSP4_TXD, + GPIO96_SSP4_RXD, + + /* CAN nIRQ lines */ + GPIO74_GPIO | MFP_LPM_EDGE_RISE, + GPIO75_GPIO | MFP_LPM_EDGE_RISE, + GPIO76_GPIO | MFP_LPM_EDGE_RISE, + GPIO77_GPIO | MFP_LPM_EDGE_RISE +}; + +static void __init icontrol_can_init(void) +{ + pxa3xx_mfp_config(ARRAY_AND_SIZE(mfp_can_cfg)); + platform_add_devices(ARRAY_AND_SIZE(icontrol_spi_devices)); + spi_register_board_info(ARRAY_AND_SIZE(mcp251x_board_info)); +} + +static void __init icontrol_init(void) +{ + mxm_8x10_barebones_init(); + mxm_8x10_usb_host_init(); + mxm_8x10_mmc_init(); + + icontrol_can_init(); +} + +MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM") + .phys_io = 0x40000000, + .boot_params = 0xa0000100, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .map_io = pxa_map_io, + .init_irq = pxa3xx_init_irq, + .timer = &pxa_timer, + .init_machine = icontrol_init +MACHINE_END diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c index 5c9e11d74f4..bc78c4dc0c6 100644 --- a/arch/arm/mach-pxa/idp.c +++ b/arch/arm/mach-pxa/idp.c @@ -47,25 +47,7 @@ static unsigned long idp_pin_config[] __initdata = { /* LCD */ - GPIO58_LCD_LDD_0, - GPIO59_LCD_LDD_1, - GPIO60_LCD_LDD_2, - GPIO61_LCD_LDD_3, - GPIO62_LCD_LDD_4, - GPIO63_LCD_LDD_5, - GPIO64_LCD_LDD_6, - GPIO65_LCD_LDD_7, - GPIO66_LCD_LDD_8, - GPIO67_LCD_LDD_9, - GPIO68_LCD_LDD_10, - GPIO69_LCD_LDD_11, - GPIO70_LCD_LDD_12, - GPIO71_LCD_LDD_13, - GPIO72_LCD_LDD_14, - GPIO73_LCD_LDD_15, - GPIO74_LCD_FCLK, - GPIO75_LCD_LCLK, - GPIO76_LCD_PCLK, + GPIOxx_LCD_DSTN_16BPP, /* BTUART */ GPIO42_BTUART_RXD, diff --git a/arch/arm/mach-pxa/imote2.c b/arch/arm/mach-pxa/imote2.c index 5b0862df61a..b2f878bd460 100644 --- a/arch/arm/mach-pxa/imote2.c +++ b/arch/arm/mach-pxa/imote2.c @@ -64,7 +64,6 @@ static unsigned long imote2_pin_config[] __initdata = { GPIO116_GPIO, /* CC_CCA */ GPIO0_GPIO, /* CC_FIFOP */ GPIO16_GPIO, /* CCSFD */ - GPIO39_GPIO, /* CSn */ GPIO115_GPIO, /* Power enable */ /* I2C */ @@ -72,7 +71,7 @@ static unsigned long imote2_pin_config[] __initdata = { GPIO118_I2C_SDA, /* SSP 3 - 802.15.4 radio */ - GPIO39_GPIO, /* Chip Select */ + GPIO39_GPIO, /* Chip Select */ GPIO34_SSP3_SCLK, GPIO35_SSP3_TXD, GPIO41_SSP3_RXD, diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h index bfec09b1814..1a741065045 100644 --- a/arch/arm/mach-pxa/include/mach/balloon3.h +++ b/arch/arm/mach-pxa/include/mach/balloon3.h @@ -129,6 +129,16 @@ enum balloon3_features { #define CPLD_AROUTING_LOONR2INT_BIT 6 #define CPLD_AROUTING_LOONR2EXT_BIT 7 +/* Balloon3 Interrupts */ +#define BALLOON3_IRQ(x) (IRQ_BOARD_START + (x)) + +#define BALLOON3_BP_CF_NRDY_IRQ BALLOON3_IRQ(0) +#define BALLOON3_BP_NSTSCHG_IRQ BALLOON3_IRQ(1) + +#define BALLOON3_AUX_NIRQ IRQ_GPIO(BALLOON3_GPIO_AUX_NIRQ) +#define BALLOON3_CODEC_IRQ IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ) +#define BALLOON3_S0_CD_IRQ IRQ_GPIO(BALLOON3_GPIO_S0_CD) + extern int balloon3_has(enum balloon3_features feature); #endif diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h index 3677a9af9c8..ffc8314520f 100644 --- a/arch/arm/mach-pxa/include/mach/irqs.h +++ b/arch/arm/mach-pxa/include/mach/irqs.h @@ -135,82 +135,6 @@ #define IRQ_BOARD_END (IRQ_BOARD_START + 16) #endif -#define IRQ_SA1111_START (IRQ_BOARD_END) -#define IRQ_GPAIN0 (IRQ_BOARD_END + 0) -#define IRQ_GPAIN1 (IRQ_BOARD_END + 1) -#define IRQ_GPAIN2 (IRQ_BOARD_END + 2) -#define IRQ_GPAIN3 (IRQ_BOARD_END + 3) -#define IRQ_GPBIN0 (IRQ_BOARD_END + 4) -#define IRQ_GPBIN1 (IRQ_BOARD_END + 5) -#define IRQ_GPBIN2 (IRQ_BOARD_END + 6) -#define IRQ_GPBIN3 (IRQ_BOARD_END + 7) -#define IRQ_GPBIN4 (IRQ_BOARD_END + 8) -#define IRQ_GPBIN5 (IRQ_BOARD_END + 9) -#define IRQ_GPCIN0 (IRQ_BOARD_END + 10) -#define IRQ_GPCIN1 (IRQ_BOARD_END + 11) -#define IRQ_GPCIN2 (IRQ_BOARD_END + 12) -#define IRQ_GPCIN3 (IRQ_BOARD_END + 13) -#define IRQ_GPCIN4 (IRQ_BOARD_END + 14) -#define IRQ_GPCIN5 (IRQ_BOARD_END + 15) -#define IRQ_GPCIN6 (IRQ_BOARD_END + 16) -#define IRQ_GPCIN7 (IRQ_BOARD_END + 17) -#define IRQ_MSTXINT (IRQ_BOARD_END + 18) -#define IRQ_MSRXINT (IRQ_BOARD_END + 19) -#define IRQ_MSSTOPERRINT (IRQ_BOARD_END + 20) -#define IRQ_TPTXINT (IRQ_BOARD_END + 21) -#define IRQ_TPRXINT (IRQ_BOARD_END + 22) -#define IRQ_TPSTOPERRINT (IRQ_BOARD_END + 23) -#define SSPXMTINT (IRQ_BOARD_END + 24) -#define SSPRCVINT (IRQ_BOARD_END + 25) -#define SSPROR (IRQ_BOARD_END + 26) -#define AUDXMTDMADONEA (IRQ_BOARD_END + 32) -#define AUDRCVDMADONEA (IRQ_BOARD_END + 33) -#define AUDXMTDMADONEB (IRQ_BOARD_END + 34) -#define AUDRCVDMADONEB (IRQ_BOARD_END + 35) -#define AUDTFSR (IRQ_BOARD_END + 36) -#define AUDRFSR (IRQ_BOARD_END + 37) -#define AUDTUR (IRQ_BOARD_END + 38) -#define AUDROR (IRQ_BOARD_END + 39) -#define AUDDTS (IRQ_BOARD_END + 40) -#define AUDRDD (IRQ_BOARD_END + 41) -#define AUDSTO (IRQ_BOARD_END + 42) -#define IRQ_USBPWR (IRQ_BOARD_END + 43) -#define IRQ_HCIM (IRQ_BOARD_END + 44) -#define IRQ_HCIBUFFACC (IRQ_BOARD_END + 45) -#define IRQ_HCIRMTWKP (IRQ_BOARD_END + 46) -#define IRQ_NHCIMFCIR (IRQ_BOARD_END + 47) -#define IRQ_USB_PORT_RESUME (IRQ_BOARD_END + 48) -#define IRQ_S0_READY_NINT (IRQ_BOARD_END + 49) -#define IRQ_S1_READY_NINT (IRQ_BOARD_END + 50) -#define IRQ_S0_CD_VALID (IRQ_BOARD_END + 51) -#define IRQ_S1_CD_VALID (IRQ_BOARD_END + 52) -#define IRQ_S0_BVD1_STSCHG (IRQ_BOARD_END + 53) -#define IRQ_S1_BVD1_STSCHG (IRQ_BOARD_END + 54) - -#define IRQ_LOCOMO_START (IRQ_BOARD_END) -#define IRQ_LOCOMO_KEY (IRQ_BOARD_END + 0) -#define IRQ_LOCOMO_GPIO0 (IRQ_BOARD_END + 1) -#define IRQ_LOCOMO_GPIO1 (IRQ_BOARD_END + 2) -#define IRQ_LOCOMO_GPIO2 (IRQ_BOARD_END + 3) -#define IRQ_LOCOMO_GPIO3 (IRQ_BOARD_END + 4) -#define IRQ_LOCOMO_GPIO4 (IRQ_BOARD_END + 5) -#define IRQ_LOCOMO_GPIO5 (IRQ_BOARD_END + 6) -#define IRQ_LOCOMO_GPIO6 (IRQ_BOARD_END + 7) -#define IRQ_LOCOMO_GPIO7 (IRQ_BOARD_END + 8) -#define IRQ_LOCOMO_GPIO8 (IRQ_BOARD_END + 9) -#define IRQ_LOCOMO_GPIO9 (IRQ_BOARD_END + 10) -#define IRQ_LOCOMO_GPIO10 (IRQ_BOARD_END + 11) -#define IRQ_LOCOMO_GPIO11 (IRQ_BOARD_END + 12) -#define IRQ_LOCOMO_GPIO12 (IRQ_BOARD_END + 13) -#define IRQ_LOCOMO_GPIO13 (IRQ_BOARD_END + 14) -#define IRQ_LOCOMO_GPIO14 (IRQ_BOARD_END + 15) -#define IRQ_LOCOMO_GPIO15 (IRQ_BOARD_END + 16) -#define IRQ_LOCOMO_LT (IRQ_BOARD_END + 17) -#define IRQ_LOCOMO_SPI_RFR (IRQ_BOARD_END + 18) -#define IRQ_LOCOMO_SPI_RFW (IRQ_BOARD_END + 19) -#define IRQ_LOCOMO_SPI_OVRN (IRQ_BOARD_END + 20) -#define IRQ_LOCOMO_SPI_TEND (IRQ_BOARD_END + 21) - /* * Figure out the MAX IRQ number. * @@ -219,89 +143,16 @@ * Otherwise, we have the standard IRQs only. */ #ifdef CONFIG_SA1111 -#define NR_IRQS (IRQ_S1_BVD1_STSCHG + 1) -#elif defined(CONFIG_SHARP_LOCOMO) -#define NR_IRQS (IRQ_LOCOMO_SPI_TEND + 1) +#define NR_IRQS (IRQ_BOARD_END + 55) #elif defined(CONFIG_PXA_HAVE_BOARD_IRQS) #define NR_IRQS (IRQ_BOARD_END) #else #define NR_IRQS (IRQ_BOARD_START) #endif -/* - * Board specific IRQs. Define them here. - * Do not surround them with ifdefs. - */ -#define LUBBOCK_IRQ(x) (IRQ_BOARD_START + (x)) -#define LUBBOCK_SD_IRQ LUBBOCK_IRQ(0) -#define LUBBOCK_SA1111_IRQ LUBBOCK_IRQ(1) -#define LUBBOCK_USB_IRQ LUBBOCK_IRQ(2) /* usb connect */ -#define LUBBOCK_ETH_IRQ LUBBOCK_IRQ(3) -#define LUBBOCK_UCB1400_IRQ LUBBOCK_IRQ(4) -#define LUBBOCK_BB_IRQ LUBBOCK_IRQ(5) -#define LUBBOCK_USB_DISC_IRQ LUBBOCK_IRQ(6) /* usb disconnect */ -#define LUBBOCK_LAST_IRQ LUBBOCK_IRQ(6) - -#define LPD270_IRQ(x) (IRQ_BOARD_START + (x)) -#define LPD270_USBC_IRQ LPD270_IRQ(2) -#define LPD270_ETHERNET_IRQ LPD270_IRQ(3) -#define LPD270_AC97_IRQ LPD270_IRQ(4) - -#define MAINSTONE_IRQ(x) (IRQ_BOARD_START + (x)) -#define MAINSTONE_MMC_IRQ MAINSTONE_IRQ(0) -#define MAINSTONE_USIM_IRQ MAINSTONE_IRQ(1) -#define MAINSTONE_USBC_IRQ MAINSTONE_IRQ(2) -#define MAINSTONE_ETHERNET_IRQ MAINSTONE_IRQ(3) -#define MAINSTONE_AC97_IRQ MAINSTONE_IRQ(4) -#define MAINSTONE_PEN_IRQ MAINSTONE_IRQ(5) -#define MAINSTONE_MSINS_IRQ MAINSTONE_IRQ(6) -#define MAINSTONE_EXBRD_IRQ MAINSTONE_IRQ(7) -#define MAINSTONE_S0_CD_IRQ MAINSTONE_IRQ(9) -#define MAINSTONE_S0_STSCHG_IRQ MAINSTONE_IRQ(10) -#define MAINSTONE_S0_IRQ MAINSTONE_IRQ(11) -#define MAINSTONE_S1_CD_IRQ MAINSTONE_IRQ(13) -#define MAINSTONE_S1_STSCHG_IRQ MAINSTONE_IRQ(14) -#define MAINSTONE_S1_IRQ MAINSTONE_IRQ(15) - -/* Balloon3 Interrupts */ -#define BALLOON3_IRQ(x) (IRQ_BOARD_START + (x)) - -#define BALLOON3_BP_CF_NRDY_IRQ BALLOON3_IRQ(0) -#define BALLOON3_BP_NSTSCHG_IRQ BALLOON3_IRQ(1) - -#define BALLOON3_AUX_NIRQ IRQ_GPIO(BALLOON3_GPIO_AUX_NIRQ) -#define BALLOON3_CODEC_IRQ IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ) -#define BALLOON3_S0_CD_IRQ IRQ_GPIO(BALLOON3_GPIO_S0_CD) - -/* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */ -#define IRQ_LOCOMO_KEY_BASE (IRQ_BOARD_START + 0) -#define IRQ_LOCOMO_GPIO_BASE (IRQ_BOARD_START + 1) -#define IRQ_LOCOMO_LT_BASE (IRQ_BOARD_START + 2) -#define IRQ_LOCOMO_SPI_BASE (IRQ_BOARD_START + 3) - -/* phyCORE-PXA270 (PCM027) Interrupts */ -#define PCM027_IRQ(x) (IRQ_BOARD_START + (x)) -#define PCM027_BTDET_IRQ PCM027_IRQ(0) -#define PCM027_FF_RI_IRQ PCM027_IRQ(1) -#define PCM027_MMCDET_IRQ PCM027_IRQ(2) -#define PCM027_PM_5V_IRQ PCM027_IRQ(3) - -/* ITE8152 irqs */ /* add IT8152 IRQs beyond BOARD_END */ #ifdef CONFIG_PCI_HOST_ITE8152 -#define IT8152_IRQ(x) (IRQ_BOARD_END + (x)) - -/* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */ -#define IT8152_LD_IRQ_COUNT 9 -#define IT8152_LP_IRQ_COUNT 16 -#define IT8152_PD_IRQ_COUNT 15 - -/* Priorities: */ -#define IT8152_PD_IRQ(i) IT8152_IRQ(i) -#define IT8152_LP_IRQ(i) (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT) -#define IT8152_LD_IRQ(i) (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT + IT8152_LP_IRQ_COUNT) - -#define IT8152_LAST_IRQ IT8152_LD_IRQ(IT8152_LD_IRQ_COUNT - 1) +#define IT8152_LAST_IRQ (IRQ_BOARD_END + 40) #if NR_IRQS < (IT8152_LAST_IRQ+1) #undef NR_IRQS diff --git a/arch/arm/mach-pxa/include/mach/lpd270.h b/arch/arm/mach-pxa/include/mach/lpd270.h index f89fb715266..0e6440c8168 100644 --- a/arch/arm/mach-pxa/include/mach/lpd270.h +++ b/arch/arm/mach-pxa/include/mach/lpd270.h @@ -34,5 +34,9 @@ #define LPD270_INT_ETHERNET (1 << 3) /* Ethernet controller IRQ */ #define LPD270_INT_USBC (1 << 2) /* USB client cable detection IRQ */ +#define LPD270_IRQ(x) (IRQ_BOARD_START + (x)) +#define LPD270_USBC_IRQ LPD270_IRQ(2) +#define LPD270_ETHERNET_IRQ LPD270_IRQ(3) +#define LPD270_AC97_IRQ LPD270_IRQ(4) #endif diff --git a/arch/arm/mach-pxa/include/mach/lubbock.h b/arch/arm/mach-pxa/include/mach/lubbock.h index 751b74811d0..a0d4247f08f 100644 --- a/arch/arm/mach-pxa/include/mach/lubbock.h +++ b/arch/arm/mach-pxa/include/mach/lubbock.h @@ -34,6 +34,17 @@ #define LUB_IRQ_SET_CLR __LUB_REG(LUBBOCK_FPGA_PHYS + 0x0d0) #define LUB_GP __LUB_REG(LUBBOCK_FPGA_PHYS + 0x100) +/* Board specific IRQs */ +#define LUBBOCK_IRQ(x) (IRQ_BOARD_START + (x)) +#define LUBBOCK_SD_IRQ LUBBOCK_IRQ(0) +#define LUBBOCK_SA1111_IRQ LUBBOCK_IRQ(1) +#define LUBBOCK_USB_IRQ LUBBOCK_IRQ(2) /* usb connect */ +#define LUBBOCK_ETH_IRQ LUBBOCK_IRQ(3) +#define LUBBOCK_UCB1400_IRQ LUBBOCK_IRQ(4) +#define LUBBOCK_BB_IRQ LUBBOCK_IRQ(5) +#define LUBBOCK_USB_DISC_IRQ LUBBOCK_IRQ(6) /* usb disconnect */ +#define LUBBOCK_LAST_IRQ LUBBOCK_IRQ(6) + #ifndef __ASSEMBLY__ extern void lubbock_set_misc_wr(unsigned int mask, unsigned int set); #endif diff --git a/arch/arm/mach-pxa/include/mach/mainstone.h b/arch/arm/mach-pxa/include/mach/mainstone.h index 3461c4302ff..86e623abd64 100644 --- a/arch/arm/mach-pxa/include/mach/mainstone.h +++ b/arch/arm/mach-pxa/include/mach/mainstone.h @@ -117,4 +117,21 @@ #define MST_PCMCIA_PWR_VCC_33 0x8 /* voltage VCC = 3.3V */ #define MST_PCMCIA_PWR_VCC_50 0x4 /* voltage VCC = 5.0V */ +/* board specific IRQs */ +#define MAINSTONE_IRQ(x) (IRQ_BOARD_START + (x)) +#define MAINSTONE_MMC_IRQ MAINSTONE_IRQ(0) +#define MAINSTONE_USIM_IRQ MAINSTONE_IRQ(1) +#define MAINSTONE_USBC_IRQ MAINSTONE_IRQ(2) +#define MAINSTONE_ETHERNET_IRQ MAINSTONE_IRQ(3) +#define MAINSTONE_AC97_IRQ MAINSTONE_IRQ(4) +#define MAINSTONE_PEN_IRQ MAINSTONE_IRQ(5) +#define MAINSTONE_MSINS_IRQ MAINSTONE_IRQ(6) +#define MAINSTONE_EXBRD_IRQ MAINSTONE_IRQ(7) +#define MAINSTONE_S0_CD_IRQ MAINSTONE_IRQ(9) +#define MAINSTONE_S0_STSCHG_IRQ MAINSTONE_IRQ(10) +#define MAINSTONE_S0_IRQ MAINSTONE_IRQ(11) +#define MAINSTONE_S1_CD_IRQ MAINSTONE_IRQ(13) +#define MAINSTONE_S1_STSCHG_IRQ MAINSTONE_IRQ(14) +#define MAINSTONE_S1_IRQ MAINSTONE_IRQ(15) + #endif diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h index 9c787855cf2..cafadc33dfd 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h @@ -190,4 +190,36 @@ #define GPIO89_AC97_nRESET MFP_CFG_OUT(GPIO89, AF0, DRIVE_HIGH) #endif /* CONFIG_CPU_PXA26x */ +/* commonly used pin configurations */ +#define GPIOxx_LCD_16BPP \ + GPIO58_LCD_LDD_0, \ + GPIO59_LCD_LDD_1, \ + GPIO60_LCD_LDD_2, \ + GPIO61_LCD_LDD_3, \ + GPIO62_LCD_LDD_4, \ + GPIO63_LCD_LDD_5, \ + GPIO64_LCD_LDD_6, \ + GPIO65_LCD_LDD_7, \ + GPIO66_LCD_LDD_8, \ + GPIO67_LCD_LDD_9, \ + GPIO68_LCD_LDD_10, \ + GPIO69_LCD_LDD_11, \ + GPIO70_LCD_LDD_12, \ + GPIO71_LCD_LDD_13, \ + GPIO72_LCD_LDD_14, \ + GPIO73_LCD_LDD_15 + +#define GPIOxx_LCD_DSTN_16BPP \ + GPIOxx_LCD_16BPP, \ + GPIO74_LCD_FCLK, \ + GPIO75_LCD_LCLK, \ + GPIO76_LCD_PCLK + +#define GPIOxx_LCD_TFT_16BPP \ + GPIOxx_LCD_16BPP, \ + GPIO74_LCD_FCLK, \ + GPIO75_LCD_LCLK, \ + GPIO76_LCD_PCLK, \ + GPIO77_LCD_BIAS + #endif /* __ASM_ARCH_MFP_PXA25X_H */ diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h index 6543c05f47e..ec0f0b0b674 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h @@ -434,5 +434,32 @@ #define GPIO112_nMSINS MFP_CFG_IN(GPIO112, AF2) #define GPIO32_MSSCLK MFP_CFG_OUT(GPIO32, AF1, DRIVE_LOW) +/* commonly used pin configurations */ +#define GPIOxx_LCD_16BPP \ + GPIO58_LCD_LDD_0, \ + GPIO59_LCD_LDD_1, \ + GPIO60_LCD_LDD_2, \ + GPIO61_LCD_LDD_3, \ + GPIO62_LCD_LDD_4, \ + GPIO63_LCD_LDD_5, \ + GPIO64_LCD_LDD_6, \ + GPIO65_LCD_LDD_7, \ + GPIO66_LCD_LDD_8, \ + GPIO67_LCD_LDD_9, \ + GPIO68_LCD_LDD_10, \ + GPIO69_LCD_LDD_11, \ + GPIO70_LCD_LDD_12, \ + GPIO71_LCD_LDD_13, \ + GPIO72_LCD_LDD_14, \ + GPIO73_LCD_LDD_15 + +#define GPIOxx_LCD_TFT_16BPP \ + GPIOxx_LCD_16BPP, \ + GPIO74_LCD_FCLK, \ + GPIO75_LCD_LCLK, \ + GPIO76_LCD_PCLK, \ + GPIO77_LCD_BIAS + + extern int keypad_set_wake(unsigned int on); #endif /* __ASM_ARCH_MFP_PXA27X_H */ diff --git a/arch/arm/mach-pxa/include/mach/mxm8x10.h b/arch/arm/mach-pxa/include/mach/mxm8x10.h new file mode 100644 index 00000000000..ffa15665a41 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/mxm8x10.h @@ -0,0 +1,21 @@ +#ifndef __MACH_MXM_8X10_H +#define __MACH_MXM_8X10_H + +#define MXM_8X10_ETH_PHYS 0x13000000 + +#if defined(CONFIG_MMC) + +#define MXM_8X10_SD_nCD (72) +#define MXM_8X10_SD_WP (84) + +extern void mxm_8x10_mmc_init(void); +#else +static inline void mxm_8x10_mmc_init(void) {} +#endif + +extern void mxm_8x10_usb_host_init(void); +extern void mxm_8x10_ac97_init(void); + +extern void mxm_8x10_barebones_init(void); + +#endif /* __MACH_MXM_8X10_H */ diff --git a/arch/arm/mach-pxa/include/mach/pcm027.h b/arch/arm/mach-pxa/include/mach/pcm027.h index 4dcd2e8baa6..04083263167 100644 --- a/arch/arm/mach-pxa/include/mach/pcm027.h +++ b/arch/arm/mach-pxa/include/mach/pcm027.h @@ -23,6 +23,13 @@ * Definitions of CPU card resources only */ +/* phyCORE-PXA270 (PCM027) Interrupts */ +#define PCM027_IRQ(x) (IRQ_BOARD_START + (x)) +#define PCM027_BTDET_IRQ PCM027_IRQ(0) +#define PCM027_FF_RI_IRQ PCM027_IRQ(1) +#define PCM027_MMCDET_IRQ PCM027_IRQ(2) +#define PCM027_PM_5V_IRQ PCM027_IRQ(3) + /* I2C RTC */ #define PCM027_RTC_IRQ_GPIO 0 #define PCM027_RTC_IRQ IRQ_GPIO(PCM027_RTC_IRQ_GPIO) diff --git a/arch/arm/mach-pxa/include/mach/ssp.h b/arch/arm/mach-pxa/include/mach/ssp.h index cb5cb766f0f..be1be5b6db5 100644 --- a/arch/arm/mach-pxa/include/mach/ssp.h +++ b/arch/arm/mach-pxa/include/mach/ssp.h @@ -46,6 +46,7 @@ struct ssp_device { int drcmr_tx; }; +#ifdef CONFIG_PXA_SSP_LEGACY /* * SSP initialisation flags */ @@ -78,6 +79,7 @@ void ssp_restore_state(struct ssp_dev *dev, struct ssp_state *ssp); int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags); int ssp_config(struct ssp_dev *dev, u32 mode, u32 flags, u32 psp_flags, u32 speed); void ssp_exit(struct ssp_dev *dev); +#endif /* CONFIG_PXA_SSP_LEGACY */ /** * ssp_write_reg - Write to a SSP register diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h index 237734b5b1b..5ef91d9d17e 100644 --- a/arch/arm/mach-pxa/include/mach/uncompress.h +++ b/arch/arm/mach-pxa/include/mach/uncompress.h @@ -10,20 +10,41 @@ */ #include <linux/serial_reg.h> -#include <mach/regs-uart.h> #include <asm/mach-types.h> -#define __REG(x) ((volatile unsigned long *)x) +#define FFUART_BASE (0x40100000) +#define BTUART_BASE (0x40200000) +#define STUART_BASE (0x40700000) -static volatile unsigned long *UART = FFUART; +static unsigned long uart_base = FFUART_BASE; +static unsigned int uart_shift = 2; +static unsigned int uart_is_pxa = 1; + +static inline unsigned char uart_read(int offset) +{ + return *(volatile unsigned char *)(uart_base + (offset << uart_shift)); +} + +static inline void uart_write(unsigned char val, int offset) +{ + *(volatile unsigned char *)(uart_base + (offset << uart_shift)) = val; +} + +static inline int uart_is_enabled(void) +{ + /* assume enabled by default for non-PXA uarts */ + return uart_is_pxa ? uart_read(UART_IER) & UART_IER_UUE : 1; +} static inline void putc(char c) { - if (!(UART[UART_IER] & IER_UUE)) + if (!uart_is_enabled()) return; - while (!(UART[UART_LSR] & LSR_TDRQ)) + + while (!(uart_read(UART_LSR) & UART_LSR_THRE)) barrier(); - UART[UART_TX] = c; + + uart_write(c, UART_TX); } /* @@ -38,7 +59,13 @@ static inline void arch_decomp_setup(void) if (machine_is_littleton() || machine_is_intelmote2() || machine_is_csb726() || machine_is_stargate2() || machine_is_cm_x300() || machine_is_balloon3()) - UART = STUART; + uart_base = STUART_BASE; + + if (machine_is_arcom_zeus()) { + uart_base = 0x10000000; /* nCS4 */ + uart_shift = 1; + uart_is_pxa = 0; + } } /* diff --git a/arch/arm/mach-pxa/include/mach/zeus.h b/arch/arm/mach-pxa/include/mach/zeus.h index c387046d2f2..6e119976003 100644 --- a/arch/arm/mach-pxa/include/mach/zeus.h +++ b/arch/arm/mach-pxa/include/mach/zeus.h @@ -58,6 +58,8 @@ #define ZEUS_EXT1_GPIO(x) (ZEUS_EXT1_GPIO_BASE + (x)) #define ZEUS_USER_GPIO(x) (ZEUS_USER_GPIO_BASE + (x)) +#define ZEUS_CAN_SHDN_GPIO ZEUS_EXT1_GPIO(2) + /* * CPLD registers: * Only 4 registers, but spreaded over a 32MB address space. @@ -68,7 +70,6 @@ #define ZEUS_CPLD_VERSION (ZEUS_CPLD + 0x0000) #define ZEUS_CPLD_ISA_IRQ (ZEUS_CPLD + 0x1000) #define ZEUS_CPLD_CONTROL (ZEUS_CPLD + 0x2000) -#define ZEUS_CPLD_EXTWDOG (ZEUS_CPLD + 0x3000) /* CPLD register bits */ #define ZEUS_CPLD_CONTROL_CF_RST 0x01 diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index 1373c22dbb8..d279507fc74 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -83,6 +83,10 @@ static unsigned long lpd270_pin_config[] __initdata = { GPIO89_USBH1_PEN, /* AC97 */ + GPIO28_AC97_BITCLK, + GPIO29_AC97_SDATA_IN_0, + GPIO30_AC97_SDATA_OUT, + GPIO31_AC97_SYNC, GPIO45_AC97_SYSCLK, GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH, @@ -121,7 +125,7 @@ static void lpd270_irq_handler(unsigned int irq, struct irq_desc *desc) pending = __raw_readw(LPD270_INT_STATUS) & lpd270_irq_enabled; do { - GEDR(0) = GPIO_bit(0); /* clear useless edge notification */ + desc->chip->ack(irq); /* clear useless edge notification */ if (likely(pending)) { irq = LPD270_IRQ(0) + __ffs(pending); generic_handle_irq(irq); diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index 98ee7e59029..63d65a2a038 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -66,26 +66,14 @@ static unsigned long lubbock_pin_config[] __initdata = { GPIO25_SSP1_TXD, GPIO26_SSP1_RXD, + /* AC97 */ + GPIO28_AC97_BITCLK, + GPIO29_AC97_SDATA_IN_0, + GPIO30_AC97_SDATA_OUT, + GPIO31_AC97_SYNC, + /* LCD - 16bpp DSTN */ - GPIO58_LCD_LDD_0, - GPIO59_LCD_LDD_1, - GPIO60_LCD_LDD_2, - GPIO61_LCD_LDD_3, - GPIO62_LCD_LDD_4, - GPIO63_LCD_LDD_5, - GPIO64_LCD_LDD_6, - GPIO65_LCD_LDD_7, - GPIO66_LCD_LDD_8, - GPIO67_LCD_LDD_9, - GPIO68_LCD_LDD_10, - GPIO69_LCD_LDD_11, - GPIO70_LCD_LDD_12, - GPIO71_LCD_LDD_13, - GPIO72_LCD_LDD_14, - GPIO73_LCD_LDD_15, - GPIO74_LCD_FCLK, - GPIO75_LCD_LCLK, - GPIO76_LCD_PCLK, + GPIOxx_LCD_DSTN_16BPP, /* BTUART */ GPIO42_BTUART_RXD, @@ -158,7 +146,7 @@ static void lubbock_irq_handler(unsigned int irq, struct irq_desc *desc) { unsigned long pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled; do { - GEDR(0) = GPIO_bit(0); /* clear our parent irq */ + desc->chip->ack(irq); /* clear our parent irq */ if (likely(pending)) { irq = LUBBOCK_IRQ(0) + __ffs(pending); generic_handle_irq(irq); @@ -240,11 +228,18 @@ static struct resource sa1111_resources[] = { }, }; +static struct sa1111_platform_data sa1111_info = { + .irq_base = IRQ_BOARD_END, +}; + static struct platform_device sa1111_device = { .name = "sa1111", .id = -1, .num_resources = ARRAY_SIZE(sa1111_resources), .resource = sa1111_resources, + .dev = { + .platform_data = &sa1111_info, + }, }; /* ADS7846 is connected through SSP ... and if your board has J5 populated, diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index 189f330719a..e81dd0c8e40 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -88,26 +88,7 @@ static unsigned long magician_pin_config[] __initdata = { GPIO112_MMC_CMD, /* LCD */ - GPIO58_LCD_LDD_0, - GPIO59_LCD_LDD_1, - GPIO60_LCD_LDD_2, - GPIO61_LCD_LDD_3, - GPIO62_LCD_LDD_4, - GPIO63_LCD_LDD_5, - GPIO64_LCD_LDD_6, - GPIO65_LCD_LDD_7, - GPIO66_LCD_LDD_8, - GPIO67_LCD_LDD_9, - GPIO68_LCD_LDD_10, - GPIO69_LCD_LDD_11, - GPIO70_LCD_LDD_12, - GPIO71_LCD_LDD_13, - GPIO72_LCD_LDD_14, - GPIO73_LCD_LDD_15, - GPIO74_LCD_FCLK, - GPIO75_LCD_LCLK, - GPIO76_LCD_PCLK, - GPIO77_LCD_BIAS, + GPIOxx_LCD_TFT_16BPP, /* QCI */ GPIO12_CIF_DD_7, diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 851ee0fc32e..5543c64da9e 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -60,26 +60,7 @@ static unsigned long mainstone_pin_config[] = { GPIO15_nCS_1, /* LCD - 16bpp Active TFT */ - GPIO58_LCD_LDD_0, - GPIO59_LCD_LDD_1, - GPIO60_LCD_LDD_2, - GPIO61_LCD_LDD_3, - GPIO62_LCD_LDD_4, - GPIO63_LCD_LDD_5, - GPIO64_LCD_LDD_6, - GPIO65_LCD_LDD_7, - GPIO66_LCD_LDD_8, - GPIO67_LCD_LDD_9, - GPIO68_LCD_LDD_10, - GPIO69_LCD_LDD_11, - GPIO70_LCD_LDD_12, - GPIO71_LCD_LDD_13, - GPIO72_LCD_LDD_14, - GPIO73_LCD_LDD_15, - GPIO74_LCD_FCLK, - GPIO75_LCD_LCLK, - GPIO76_LCD_PCLK, - GPIO77_LCD_BIAS, + GPIOxx_LCD_TFT_16BPP, GPIO16_PWM0_OUT, /* Backlight */ /* MMC */ @@ -107,6 +88,10 @@ static unsigned long mainstone_pin_config[] = { GPIO57_nIOIS16, /* AC97 */ + GPIO28_AC97_BITCLK, + GPIO29_AC97_SDATA_IN_0, + GPIO30_AC97_SDATA_OUT, + GPIO31_AC97_SYNC, GPIO45_AC97_SYSCLK, /* Keypad */ @@ -162,7 +147,7 @@ static void mainstone_irq_handler(unsigned int irq, struct irq_desc *desc) { unsigned long pending = MST_INTSETCLR & mainstone_irq_enabled; do { - GEDR(0) = GPIO_bit(0); /* clear useless edge notification */ + desc->chip->ack(irq); /* clear useless edge notification */ if (likely(pending)) { irq = MAINSTONE_IRQ(0) + __ffs(pending); generic_handle_irq(irq); diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index 2466a44d8fd..843fcca76e2 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -86,25 +86,7 @@ static unsigned long mioa701_pin_config[] = { MIO_CFG_OUT(GPIO22_USB_ENABLE, AF0, DRIVE_LOW), /* LCD */ - GPIO58_LCD_LDD_0, - GPIO59_LCD_LDD_1, - GPIO60_LCD_LDD_2, - GPIO61_LCD_LDD_3, - GPIO62_LCD_LDD_4, - GPIO63_LCD_LDD_5, - GPIO64_LCD_LDD_6, - GPIO65_LCD_LDD_7, - GPIO66_LCD_LDD_8, - GPIO67_LCD_LDD_9, - GPIO68_LCD_LDD_10, - GPIO69_LCD_LDD_11, - GPIO70_LCD_LDD_12, - GPIO71_LCD_LDD_13, - GPIO72_LCD_LDD_14, - GPIO73_LCD_LDD_15, - GPIO74_LCD_FCLK, - GPIO75_LCD_LCLK, - GPIO76_LCD_PCLK, + GPIOxx_LCD_TFT_16BPP, /* QCI */ GPIO12_CIF_DD_7, @@ -155,6 +137,10 @@ static unsigned long mioa701_pin_config[] = { GPIO41_FFUART_RTS, /* Sound */ + GPIO28_AC97_BITCLK, + GPIO29_AC97_SDATA_IN_0, + GPIO30_AC97_SDATA_OUT, + GPIO31_AC97_SYNC, GPIO89_AC97_SYSCLK, MIO_CFG_IN(GPIO12_HPJACK_INSERT, AF0), diff --git a/arch/arm/mach-pxa/mxm8x10.c b/arch/arm/mach-pxa/mxm8x10.c new file mode 100644 index 00000000000..8c9c6f0d56b --- /dev/null +++ b/arch/arm/mach-pxa/mxm8x10.c @@ -0,0 +1,474 @@ +/* + * linux/arch/arm/mach-pxa/mxm8x10.c + * + * Support for the Embedian MXM-8x10 Computer on Module + * + * Copyright (C) 2006 Marvell International Ltd. + * Copyright (C) 2009 Embedian Inc. + * Copyright (C) 2009 TMT Services & Supplies (Pty) Ltd. + * + * 2007-09-04: eric miao <eric.y.miao@gmail.com> + * rewrite to align with latest kernel + * + * 2010-01-09: Edwin Peer <epeer@tmtservices.co.za> + * Hennie van der Merwe <hvdmerwe@tmtservices.co.za> + * rework for upstream merge + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/serial_8250.h> +#include <linux/dm9000.h> +#include <linux/gpio.h> + +#include <plat/i2c.h> +#include <plat/pxa3xx_nand.h> + +#include <mach/pxafb.h> +#include <mach/mmc.h> +#include <mach/ohci.h> +#include <mach/pxa320.h> + +#include <mach/mxm8x10.h> + +#include "devices.h" +#include "generic.h" + +/* GPIO pin definition + +External device stuff - Leave unconfigured for now... +--------------------- +GPIO0 - DREQ (External DMA Request) +GPIO3 - nGCS2 (External Chip Select) Where is nGCS0; nGCS1; nGCS4; nGCS5 ? +GPIO4 - nGCS3 +GPIO15 - EXT_GPIO1 +GPIO16 - EXT_GPIO2 +GPIO17 - EXT_GPIO3 +GPIO24 - EXT_GPIO4 +GPIO25 - EXT_GPIO5 +GPIO26 - EXT_GPIO6 +GPIO27 - EXT_GPIO7 +GPIO28 - EXT_GPIO8 +GPIO29 - EXT_GPIO9 +GPIO30 - EXT_GPIO10 +GPIO31 - EXT_GPIO11 +GPIO57 - EXT_GPIO12 +GPIO74 - EXT_IRQ1 +GPIO75 - EXT_IRQ2 +GPIO76 - EXT_IRQ3 +GPIO77 - EXT_IRQ4 +GPIO78 - EXT_IRQ5 +GPIO79 - EXT_IRQ6 +GPIO80 - EXT_IRQ7 +GPIO81 - EXT_IRQ8 +GPIO87 - VCCIO_PWREN (External Device PWREN) + +Dallas 1-Wire - Leave unconfigured for now... +------------- +GPIO0_2 - DS - 1Wire + +Ethernet +-------- +GPIO1 - DM9000 PWR +GPIO9 - DM9K_nIRQ +GPIO36 - DM9K_RESET + +Keypad - Leave unconfigured by for now... +------ +GPIO1_2 - KP_DKIN0 +GPIO5_2 - KP_MKOUT7 +GPIO82 - KP_DKIN1 +GPIO85 - KP_DKIN2 +GPIO86 - KP_DKIN3 +GPIO113 - KP_MKIN0 +GPIO114 - KP_MKIN1 +GPIO115 - KP_MKIN2 +GPIO116 - KP_MKIN3 +GPIO117 - KP_MKIN4 +GPIO118 - KP_MKIN5 +GPIO119 - KP_MKIN6 +GPIO120 - KP_MKIN7 +GPIO121 - KP_MKOUT0 +GPIO122 - KP_MKOUT1 +GPIO122 - KP_MKOUT2 +GPIO123 - KP_MKOUT3 +GPIO124 - KP_MKOUT4 +GPIO125 - KP_MKOUT5 +GPIO127 - KP_MKOUT6 + +Data Bus - Leave unconfigured for now... +-------- +GPIO2 - nWait (Data Bus) + +USB Device +---------- +GPIO4_2 - USBD_PULLUP +GPIO10 - UTM_CLK (USB Device UTM Clk) +GPIO49 - USB 2.0 Device UTM_DATA0 +GPIO50 - USB 2.0 Device UTM_DATA1 +GPIO51 - USB 2.0 Device UTM_DATA2 +GPIO52 - USB 2.0 Device UTM_DATA3 +GPIO53 - USB 2.0 Device UTM_DATA4 +GPIO54 - USB 2.0 Device UTM_DATA5 +GPIO55 - USB 2.0 Device UTM_DATA6 +GPIO56 - USB 2.0 Device UTM_DATA7 +GPIO58 - UTM_RXVALID (USB 2.0 Device) +GPIO59 - UTM_RXACTIVE (USB 2.0 Device) +GPIO60 - UTM_RXERROR +GPIO61 - UTM_OPMODE0 +GPIO62 - UTM_OPMODE1 +GPIO71 - USBD_INT (USB Device?) +GPIO73 - UTM_TXREADY (USB 2.0 Device) +GPIO83 - UTM_TXVALID (USB 2.0 Device) +GPIO98 - UTM_RESET (USB 2.0 device) +GPIO99 - UTM_XCVR_SELECT +GPIO100 - UTM_TERM_SELECT +GPIO101 - UTM_SUSPENDM_X +GPIO102 - UTM_LINESTATE0 +GPIO103 - UTM_LINESTATE1 + +Card-Bus Interface - Leave unconfigured for now... +------------------ +GPIO5 - nPIOR (I/O space output enable) +GPIO6 - nPIOW (I/O space write enable) +GPIO7 - nIOS16 (Input from I/O space telling size of data bus) +GPIO8 - nPWAIT (Input for inserting wait states) + +LCD +--- +GPIO6_2 - LDD0 +GPIO7_2 - LDD1 +GPIO8_2 - LDD2 +GPIO9_2 - LDD3 +GPIO11_2 - LDD5 +GPIO12_2 - LDD6 +GPIO13_2 - LDD7 +GPIO14_2 - VSYNC +GPIO15_2 - HSYNC +GPIO16_2 - VCLK +GPIO17_2 - HCLK +GPIO18_2 - VDEN +GPIO63 - LDD8 (CPU LCD) +GPIO64 - LDD9 (CPU LCD) +GPIO65 - LDD10 (CPU LCD) +GPIO66 - LDD11 (CPU LCD) +GPIO67 - LDD12 (CPU LCD) +GPIO68 - LDD13 (CPU LCD) +GPIO69 - LDD14 (CPU LCD) +GPIO70 - LDD15 (CPU LCD) +GPIO88 - VCCLCD_PWREN (LCD Panel PWREN) +GPIO97 - BACKLIGHT_EN +GPIO104 - LCD_PWREN + +PWM - Leave unconfigured for now... +--- +GPIO11 - PWM0 +GPIO12 - PWM1 +GPIO13 - PWM2 +GPIO14 - PWM3 + +SD-CARD +------- +GPIO18 - SDDATA0 +GPIO19 - SDDATA1 +GPIO20 - SDDATA2 +GPIO21 - SDDATA3 +GPIO22 - SDCLK +GPIO23 - SDCMD +GPIO72 - SD_WP +GPIO84 - SD_nIRQ_CD (SD-Card) + +I2C +--- +GPIO32 - I2CSCL +GPIO33 - I2CSDA + +AC97 +---- +GPIO35 - AC97_SDATA_IN +GPIO37 - AC97_SDATA_OUT +GPIO38 - AC97_SYNC +GPIO39 - AC97_BITCLK +GPIO40 - AC97_nRESET + +UART1 +----- +GPIO41 - UART_RXD1 +GPIO42 - UART_TXD1 +GPIO43 - UART_CTS1 +GPIO44 - UART_DCD1 +GPIO45 - UART_DSR1 +GPIO46 - UART_nRI1 +GPIO47 - UART_DTR1 +GPIO48 - UART_RTS1 + +UART2 +----- +GPIO109 - RTS2 +GPIO110 - RXD2 +GPIO111 - TXD2 +GPIO112 - nCTS2 + +UART3 +----- +GPIO105 - nCTS3 +GPIO106 - nRTS3 +GPIO107 - TXD3 +GPIO108 - RXD3 + +SSP3 - Leave unconfigured for now... +---- +GPIO89 - SSP3_CLK +GPIO90 - SSP3_SFRM +GPIO91 - SSP3_TXD +GPIO92 - SSP3_RXD + +SSP4 +GPIO93 - SSP4_CLK +GPIO94 - SSP4_SFRM +GPIO95 - SSP4_TXD +GPIO96 - SSP4_RXD +*/ + +static mfp_cfg_t mfp_cfg[] __initdata = { + /* USB */ + GPIO10_UTM_CLK, + GPIO49_U2D_PHYDATA_0, + GPIO50_U2D_PHYDATA_1, + GPIO51_U2D_PHYDATA_2, + GPIO52_U2D_PHYDATA_3, + GPIO53_U2D_PHYDATA_4, + GPIO54_U2D_PHYDATA_5, + GPIO55_U2D_PHYDATA_6, + GPIO56_U2D_PHYDATA_7, + GPIO58_UTM_RXVALID, + GPIO59_UTM_RXACTIVE, + GPIO60_U2D_RXERROR, + GPIO61_U2D_OPMODE0, + GPIO62_U2D_OPMODE1, + GPIO71_GPIO, /* USBD_INT */ + GPIO73_UTM_TXREADY, + GPIO83_U2D_TXVALID, + GPIO98_U2D_RESET, + GPIO99_U2D_XCVR_SEL, + GPIO100_U2D_TERM_SEL, + GPIO101_U2D_SUSPEND, + GPIO102_UTM_LINESTATE_0, + GPIO103_UTM_LINESTATE_1, + GPIO4_2_GPIO | MFP_PULL_HIGH, /* UTM_PULLUP */ + + /* DM9000 */ + GPIO1_GPIO, + GPIO9_GPIO, + GPIO36_GPIO, + + /* AC97 */ + GPIO35_AC97_SDATA_IN_0, + GPIO37_AC97_SDATA_OUT, + GPIO38_AC97_SYNC, + GPIO39_AC97_BITCLK, + GPIO40_AC97_nACRESET, + + /* UARTS */ + GPIO41_UART1_RXD, + GPIO42_UART1_TXD, + GPIO43_UART1_CTS, + GPIO44_UART1_DCD, + GPIO45_UART1_DSR, + GPIO46_UART1_RI, + GPIO47_UART1_DTR, + GPIO48_UART1_RTS, + + GPIO109_UART2_RTS, + GPIO110_UART2_RXD, + GPIO111_UART2_TXD, + GPIO112_UART2_CTS, + + GPIO105_UART3_CTS, + GPIO106_UART3_RTS, + GPIO107_UART3_TXD, + GPIO108_UART3_RXD, + + GPIO78_GPIO, + GPIO79_GPIO, + GPIO80_GPIO, + GPIO81_GPIO, + + /* I2C */ + GPIO32_I2C_SCL, + GPIO33_I2C_SDA, + + /* MMC */ + GPIO18_MMC1_DAT0, + GPIO19_MMC1_DAT1, + GPIO20_MMC1_DAT2, + GPIO21_MMC1_DAT3, + GPIO22_MMC1_CLK, + GPIO23_MMC1_CMD, + GPIO72_GPIO | MFP_PULL_HIGH, /* Card Detect */ + GPIO84_GPIO | MFP_PULL_LOW, /* Write Protect */ + + /* IRQ */ + GPIO74_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ1 */ + GPIO75_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ2 */ + GPIO76_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ3 */ + GPIO77_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ4 */ + GPIO78_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ5 */ + GPIO79_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ6 */ + GPIO80_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ7 */ + GPIO81_GPIO | MFP_LPM_EDGE_RISE /* EXT_IRQ8 */ +}; + +/* MMC/MCI Support */ +#if defined(CONFIG_MMC) +static struct pxamci_platform_data mxm_8x10_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, + .detect_delay = 1, + .gpio_card_detect = MXM_8X10_SD_nCD, + .gpio_card_ro = MXM_8X10_SD_WP, + .gpio_power = -1 +}; + +void __init mxm_8x10_mmc_init(void) +{ + pxa_set_mci_info(&mxm_8x10_mci_platform_data); +} +#endif + +/* USB Open Host Controler Interface */ +static struct pxaohci_platform_data mxm_8x10_ohci_platform_data = { + .port_mode = PMM_NPS_MODE, + .flags = ENABLE_PORT_ALL +}; + +void __init mxm_8x10_usb_host_init(void) +{ + pxa_set_ohci_info(&mxm_8x10_ohci_platform_data); +} + +/* AC97 Sound Support */ +static struct platform_device mxm_8x10_ac97_device = { + .name = "pxa2xx-ac97" +}; + +void __init mxm_8x10_ac97_init(void) +{ + platform_device_register(&mxm_8x10_ac97_device); +} + +/* NAND flash Support */ +#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE) +#define NAND_BLOCK_SIZE SZ_128K +#define NB(x) (NAND_BLOCK_SIZE * (x)) +static struct mtd_partition mxm_8x10_nand_partitions[] = { + [0] = { + .name = "boot", + .size = NB(0x002), + .offset = NB(0x000), + .mask_flags = MTD_WRITEABLE + }, + [1] = { + .name = "kernel", + .size = NB(0x010), + .offset = NB(0x002), + .mask_flags = MTD_WRITEABLE + }, + [2] = { + .name = "root", + .size = NB(0x36c), + .offset = NB(0x012) + }, + [3] = { + .name = "bbt", + .size = NB(0x082), + .offset = NB(0x37e), + .mask_flags = MTD_WRITEABLE + } +}; + +static struct pxa3xx_nand_platform_data mxm_8x10_nand_info = { + .enable_arbiter = 1, + .keep_config = 1, + .parts = mxm_8x10_nand_partitions, + .nr_parts = ARRAY_SIZE(mxm_8x10_nand_partitions) +}; + +static void __init mxm_8x10_nand_init(void) +{ + pxa3xx_set_nand_info(&mxm_8x10_nand_info); +} +#else +static inline void mxm_8x10_nand_init(void) {} +#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */ + +/* Ethernet support: Davicom DM9000 */ +static struct resource dm9k_resources[] = { + [0] = { + .start = MXM_8X10_ETH_PHYS + 0x300, + .end = MXM_8X10_ETH_PHYS + 0x300, + .flags = IORESOURCE_MEM + }, + [1] = { + .start = MXM_8X10_ETH_PHYS + 0x308, + .end = MXM_8X10_ETH_PHYS + 0x308, + .flags = IORESOURCE_MEM + }, + [2] = { + .start = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO9)), + .end = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO9)), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE + } +}; + +static struct dm9000_plat_data dm9k_plat_data = { + .flags = DM9000_PLATF_16BITONLY +}; + +static struct platform_device dm9k_device = { + .name = "dm9000", + .id = 0, + .num_resources = ARRAY_SIZE(dm9k_resources), + .resource = dm9k_resources, + .dev = { + .platform_data = &dm9k_plat_data + } +}; + +static void __init mxm_8x10_ethernet_init(void) +{ + platform_device_register(&dm9k_device); +} + +/* PXA UARTs */ +static void __init mxm_8x10_uarts_init(void) +{ + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); +} + +/* I2C and Real Time Clock */ +static struct i2c_board_info __initdata mxm_8x10_i2c_devices[] = { + { + I2C_BOARD_INFO("ds1337", 0x68) + } +}; + +static void __init mxm_8x10_i2c_init(void) +{ + i2c_register_board_info(0, mxm_8x10_i2c_devices, + ARRAY_SIZE(mxm_8x10_i2c_devices)); + pxa_set_i2c_info(NULL); +} + +void __init mxm_8x10_barebones_init(void) +{ + pxa3xx_mfp_config(ARRAY_AND_SIZE(mfp_cfg)); + + mxm_8x10_uarts_init(); + mxm_8x10_nand_init(); + mxm_8x10_i2c_init(); + mxm_8x10_ethernet_init(); +} diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c index e100af78b16..f70c75b3876 100644 --- a/arch/arm/mach-pxa/palmld.c +++ b/arch/arm/mach-pxa/palmld.c @@ -83,26 +83,7 @@ static unsigned long palmld_pin_config[] __initdata = { GPIO105_KP_MKOUT_2, /* LCD */ - GPIO58_LCD_LDD_0, - GPIO59_LCD_LDD_1, - GPIO60_LCD_LDD_2, - GPIO61_LCD_LDD_3, - GPIO62_LCD_LDD_4, - GPIO63_LCD_LDD_5, - GPIO64_LCD_LDD_6, - GPIO65_LCD_LDD_7, - GPIO66_LCD_LDD_8, - GPIO67_LCD_LDD_9, - GPIO68_LCD_LDD_10, - GPIO69_LCD_LDD_11, - GPIO70_LCD_LDD_12, - GPIO71_LCD_LDD_13, - GPIO72_LCD_LDD_14, - GPIO73_LCD_LDD_15, - GPIO74_LCD_FCLK, - GPIO75_LCD_LCLK, - GPIO76_LCD_PCLK, - GPIO77_LCD_BIAS, + GPIOxx_LCD_TFT_16BPP, /* PWM */ GPIO16_PWM0_OUT, diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c index 8fe3ec27568..d902a813aae 100644 --- a/arch/arm/mach-pxa/palmt5.c +++ b/arch/arm/mach-pxa/palmt5.c @@ -87,26 +87,7 @@ static unsigned long palmt5_pin_config[] __initdata = { GPIO105_KP_MKOUT_2, /* LCD */ - GPIO58_LCD_LDD_0, - GPIO59_LCD_LDD_1, - GPIO60_LCD_LDD_2, - GPIO61_LCD_LDD_3, - GPIO62_LCD_LDD_4, - GPIO63_LCD_LDD_5, - GPIO64_LCD_LDD_6, - GPIO65_LCD_LDD_7, - GPIO66_LCD_LDD_8, - GPIO67_LCD_LDD_9, - GPIO68_LCD_LDD_10, - GPIO69_LCD_LDD_11, - GPIO70_LCD_LDD_12, - GPIO71_LCD_LDD_13, - GPIO72_LCD_LDD_14, - GPIO73_LCD_LDD_15, - GPIO74_LCD_FCLK, - GPIO75_LCD_LCLK, - GPIO76_LCD_PCLK, - GPIO77_LCD_BIAS, + GPIOxx_LCD_TFT_16BPP, /* PWM */ GPIO16_PWM0_OUT, diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c index b992f07ece2..717d7a63867 100644 --- a/arch/arm/mach-pxa/palmtc.c +++ b/arch/arm/mach-pxa/palmtc.c @@ -84,26 +84,7 @@ static unsigned long palmtc_pin_config[] __initdata = { GPIO36_GPIO, /* pullup */ /* LCD */ - GPIO58_LCD_LDD_0, - GPIO59_LCD_LDD_1, - GPIO60_LCD_LDD_2, - GPIO61_LCD_LDD_3, - GPIO62_LCD_LDD_4, - GPIO63_LCD_LDD_5, - GPIO64_LCD_LDD_6, - GPIO65_LCD_LDD_7, - GPIO66_LCD_LDD_8, - GPIO67_LCD_LDD_9, - GPIO68_LCD_LDD_10, - GPIO69_LCD_LDD_11, - GPIO70_LCD_LDD_12, - GPIO71_LCD_LDD_13, - GPIO72_LCD_LDD_14, - GPIO73_LCD_LDD_15, - GPIO74_LCD_FCLK, - GPIO75_LCD_LCLK, - GPIO76_LCD_PCLK, - GPIO77_LCD_BIAS, + GPIOxx_LCD_TFT_16BPP, /* MATRIX KEYPAD */ GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH, /* in 0 */ diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c index dc728d6ab94..3d284ff1a64 100644 --- a/arch/arm/mach-pxa/palmte2.c +++ b/arch/arm/mach-pxa/palmte2.c @@ -73,26 +73,7 @@ static unsigned long palmte2_pin_config[] __initdata = { GPIO47_FICP_TXD, /* LCD */ - GPIO58_LCD_LDD_0, - GPIO59_LCD_LDD_1, - GPIO60_LCD_LDD_2, - GPIO61_LCD_LDD_3, - GPIO62_LCD_LDD_4, - GPIO63_LCD_LDD_5, - GPIO64_LCD_LDD_6, - GPIO65_LCD_LDD_7, - GPIO66_LCD_LDD_8, - GPIO67_LCD_LDD_9, - GPIO68_LCD_LDD_10, - GPIO69_LCD_LDD_11, - GPIO70_LCD_LDD_12, - GPIO71_LCD_LDD_13, - GPIO72_LCD_LDD_14, - GPIO73_LCD_LDD_15, - GPIO74_LCD_FCLK, - GPIO75_LCD_LCLK, - GPIO76_LCD_PCLK, - GPIO77_LCD_BIAS, + GPIOxx_LCD_TFT_16BPP, /* GPIO KEYS */ GPIO5_GPIO, /* notes */ diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c index b433bb49671..d8b4469607a 100644 --- a/arch/arm/mach-pxa/palmtreo.c +++ b/arch/arm/mach-pxa/palmtreo.c @@ -99,25 +99,7 @@ static unsigned long treo_pin_config[] __initdata = { GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH, /* Hotsync button */ /* LCD */ - GPIO58_LCD_LDD_0, - GPIO59_LCD_LDD_1, - GPIO60_LCD_LDD_2, - GPIO61_LCD_LDD_3, - GPIO62_LCD_LDD_4, - GPIO63_LCD_LDD_5, - GPIO64_LCD_LDD_6, - GPIO65_LCD_LDD_7, - GPIO66_LCD_LDD_8, - GPIO67_LCD_LDD_9, - GPIO68_LCD_LDD_10, - GPIO69_LCD_LDD_11, - GPIO70_LCD_LDD_12, - GPIO71_LCD_LDD_13, - GPIO72_LCD_LDD_14, - GPIO73_LCD_LDD_15, - GPIO74_LCD_FCLK, - GPIO75_LCD_LCLK, - GPIO76_LCD_PCLK, + GPIOxx_LCD_TFT_16BPP, /* Quick Capture Interface */ GPIO84_CIF_FV, diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index b37a025c0b7..007b58c11f8 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -110,26 +110,7 @@ static unsigned long palmtx_pin_config[] __initdata = { GPIO105_KP_MKOUT_2, /* LCD */ - GPIO58_LCD_LDD_0, - GPIO59_LCD_LDD_1, - GPIO60_LCD_LDD_2, - GPIO61_LCD_LDD_3, - GPIO62_LCD_LDD_4, - GPIO63_LCD_LDD_5, - GPIO64_LCD_LDD_6, - GPIO65_LCD_LDD_7, - GPIO66_LCD_LDD_8, - GPIO67_LCD_LDD_9, - GPIO68_LCD_LDD_10, - GPIO69_LCD_LDD_11, - GPIO70_LCD_LDD_12, - GPIO71_LCD_LDD_13, - GPIO72_LCD_LDD_14, - GPIO73_LCD_LDD_15, - GPIO74_LCD_FCLK, - GPIO75_LCD_LCLK, - GPIO76_LCD_PCLK, - GPIO77_LCD_BIAS, + GPIOxx_LCD_TFT_16BPP, /* FFUART */ GPIO34_FFUART_RXD, diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c index 1c5d68a9451..3a7925ca394 100644 --- a/arch/arm/mach-pxa/palmz72.c +++ b/arch/arm/mach-pxa/palmz72.c @@ -95,26 +95,8 @@ static unsigned long palmz72_pin_config[] __initdata = { GPIO105_KP_MKOUT_2, /* LCD */ - GPIO58_LCD_LDD_0, - GPIO59_LCD_LDD_1, - GPIO60_LCD_LDD_2, - GPIO61_LCD_LDD_3, - GPIO62_LCD_LDD_4, - GPIO63_LCD_LDD_5, - GPIO64_LCD_LDD_6, - GPIO65_LCD_LDD_7, - GPIO66_LCD_LDD_8, - GPIO67_LCD_LDD_9, - GPIO68_LCD_LDD_10, - GPIO69_LCD_LDD_11, - GPIO70_LCD_LDD_12, - GPIO71_LCD_LDD_13, - GPIO72_LCD_LDD_14, - GPIO73_LCD_LDD_15, - GPIO74_LCD_FCLK, - GPIO75_LCD_LCLK, - GPIO76_LCD_PCLK, - GPIO77_LCD_BIAS, + GPIOxx_LCD_TFT_16BPP, + GPIO20_GPIO, /* bl power */ GPIO21_GPIO, /* LCD border switch */ GPIO22_GPIO, /* LCD border color */ diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index d5255ae74fe..9d0ecea1760 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -58,6 +58,12 @@ static unsigned long pcm990_pin_config[] __initdata = { /* I2C */ GPIO117_I2C_SCL, GPIO118_I2C_SDA, + + /* AC97 */ + GPIO28_AC97_BITCLK, + GPIO29_AC97_SDATA_IN_0, + GPIO30_AC97_SDATA_OUT, + GPIO31_AC97_SYNC, }; /* @@ -259,8 +265,7 @@ static void pcm990_irq_handler(unsigned int irq, struct irq_desc *desc) unsigned long pending = (~PCM990_INTSETCLR) & pcm990_irq_enabled; do { - GEDR(PCM990_CTRL_INT_IRQ_GPIO) = - GPIO_bit(PCM990_CTRL_INT_IRQ_GPIO); + desc->chip->ack(irq); /* clear our parent IRQ */ if (likely(pending)) { irq = PCM027_IRQ(0) + __ffs(pending); generic_handle_irq(irq); diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index c2b938a4d5c..d58a52415d7 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -91,26 +91,7 @@ static unsigned long poodle_pin_config[] __initdata = { GPIO35_FFUART_CTS, /* LCD */ - GPIO58_LCD_LDD_0, - GPIO59_LCD_LDD_1, - GPIO60_LCD_LDD_2, - GPIO61_LCD_LDD_3, - GPIO62_LCD_LDD_4, - GPIO63_LCD_LDD_5, - GPIO64_LCD_LDD_6, - GPIO65_LCD_LDD_7, - GPIO66_LCD_LDD_8, - GPIO67_LCD_LDD_9, - GPIO68_LCD_LDD_10, - GPIO69_LCD_LDD_11, - GPIO70_LCD_LDD_12, - GPIO71_LCD_LDD_13, - GPIO72_LCD_LDD_14, - GPIO73_LCD_LDD_15, - GPIO74_LCD_FCLK, - GPIO75_LCD_LCLK, - GPIO76_LCD_PCLK, - GPIO77_LCD_BIAS, + GPIOxx_LCD_TFT_16BPP, /* PC Card */ GPIO48_nPOE, @@ -193,11 +174,18 @@ static struct resource locomo_resources[] = { }, }; +static struct locomo_platform_data locomo_info = { + .irq_base = IRQ_BOARD_START, +}; + struct platform_device poodle_locomo_device = { .name = "locomo", .id = 0, .num_resources = ARRAY_SIZE(locomo_resources), .resource = locomo_resources, + .dev = { + .platform_data = &locomo_info, + }, }; EXPORT_SYMBOL(poodle_locomo_device); diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index d783123e2d4..0af36177ff0 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -40,6 +40,25 @@ void pxa27x_clear_otgph(void) } EXPORT_SYMBOL(pxa27x_clear_otgph); +static unsigned long ac97_reset_config[] = { + GPIO95_AC97_nRESET, + GPIO95_GPIO, + GPIO113_AC97_nRESET, + GPIO113_GPIO, +}; + +void pxa27x_assert_ac97reset(int reset_gpio, int on) +{ + if (reset_gpio == 113) + pxa2xx_mfp_config(on ? &ac97_reset_config[0] : + &ac97_reset_config[1], 1); + + if (reset_gpio == 95) + pxa2xx_mfp_config(on ? &ac97_reset_config[2] : + &ac97_reset_config[3], 1); +} +EXPORT_SYMBOL_GPL(pxa27x_assert_ac97reset); + /* Crystal clock: 13MHz */ #define BASE_CLK 13000000 diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c new file mode 100644 index 00000000000..3184bdc1452 --- /dev/null +++ b/arch/arm/mach-pxa/raumfeld.c @@ -0,0 +1,1108 @@ +/* + * arch/arm/mach-pxa/raumfeld.c + * + * Support for the following Raumfeld devices: + * + * * Controller + * * Connector + * * Speaker S/M + * + * See http://www.raumfeld.com for details. + * + * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/sysdev.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/gpio.h> +#include <linux/smsc911x.h> +#include <linux/input.h> +#include <linux/rotary_encoder.h> +#include <linux/gpio_keys.h> +#include <linux/input/eeti_ts.h> +#include <linux/leds.h> +#include <linux/w1-gpio.h> +#include <linux/sched.h> +#include <linux/pwm_backlight.h> +#include <linux/i2c.h> +#include <linux/spi/spi.h> +#include <linux/spi/spi_gpio.h> +#include <linux/lis3lv02d.h> +#include <linux/pda_power.h> +#include <linux/power_supply.h> +#include <linux/pda_power.h> +#include <linux/power_supply.h> +#include <linux/regulator/max8660.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/consumer.h> +#include <linux/delay.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +#include <mach/hardware.h> +#include <mach/pxa3xx-regs.h> +#include <mach/mfp-pxa3xx.h> +#include <mach/mfp-pxa300.h> +#include <mach/ohci.h> +#include <mach/pxafb.h> +#include <mach/mmc.h> +#include <plat/i2c.h> +#include <plat/pxa3xx_nand.h> + +#include "generic.h" +#include "devices.h" +#include "clock.h" + +/* common GPIO definitions */ + +/* inputs */ +#define GPIO_ON_OFF (14) +#define GPIO_VOLENC_A (19) +#define GPIO_VOLENC_B (20) +#define GPIO_CHARGE_DONE (23) +#define GPIO_CHARGE_IND (27) +#define GPIO_TOUCH_IRQ (32) +#define GPIO_ETH_IRQ (40) +#define GPIO_SPI_MISO (98) +#define GPIO_ACCEL_IRQ (104) +#define GPIO_RESCUE_BOOT (115) +#define GPIO_DOCK_DETECT (116) +#define GPIO_KEY1 (117) +#define GPIO_KEY2 (118) +#define GPIO_KEY3 (119) +#define GPIO_CHARGE_USB_OK (112) +#define GPIO_CHARGE_DC_OK (101) +#define GPIO_CHARGE_USB_SUSP (102) + +/* outputs */ +#define GPIO_SHUTDOWN_SUPPLY (16) +#define GPIO_SHUTDOWN_BATT (18) +#define GPIO_CHRG_PEN2 (31) +#define GPIO_TFT_VA_EN (33) +#define GPIO_SPDIF_CS (34) +#define GPIO_LED2 (35) +#define GPIO_LED1 (36) +#define GPIO_SPDIF_RESET (38) +#define GPIO_SPI_CLK (95) +#define GPIO_MCLK_DAC_CS (96) +#define GPIO_SPI_MOSI (97) +#define GPIO_W1_PULLUP_ENABLE (105) +#define GPIO_DISPLAY_ENABLE (106) +#define GPIO_MCLK_RESET (111) +#define GPIO_W2W_RESET (113) +#define GPIO_W2W_PDN (114) +#define GPIO_CODEC_RESET (120) +#define GPIO_AUDIO_VA_ENABLE (124) +#define GPIO_ACCEL_CS (125) +#define GPIO_ONE_WIRE (126) + +/* + * GPIO configurations + */ +static mfp_cfg_t raumfeld_controller_pin_config[] __initdata = { + /* UART1 */ + GPIO77_UART1_RXD, + GPIO78_UART1_TXD, + GPIO79_UART1_CTS, + GPIO81_UART1_DSR, + GPIO83_UART1_DTR, + GPIO84_UART1_RTS, + + /* UART3 */ + GPIO110_UART3_RXD, + + /* USB Host */ + GPIO0_2_USBH_PEN, + GPIO1_2_USBH_PWR, + + /* I2C */ + GPIO21_I2C_SCL | MFP_LPM_FLOAT | MFP_PULL_FLOAT, + GPIO22_I2C_SDA | MFP_LPM_FLOAT | MFP_PULL_FLOAT, + + /* SPI */ + GPIO34_GPIO, /* SPDIF_CS */ + GPIO96_GPIO, /* MCLK_CS */ + GPIO125_GPIO, /* ACCEL_CS */ + + /* MMC */ + GPIO3_MMC1_DAT0, + GPIO4_MMC1_DAT1, + GPIO5_MMC1_DAT2, + GPIO6_MMC1_DAT3, + GPIO7_MMC1_CLK, + GPIO8_MMC1_CMD, + + /* One-wire */ + GPIO126_GPIO | MFP_LPM_FLOAT, + GPIO105_GPIO | MFP_PULL_LOW | MFP_LPM_PULL_LOW, + + /* CHRG_USB_OK */ + GPIO101_GPIO | MFP_PULL_HIGH, + /* CHRG_USB_OK */ + GPIO112_GPIO | MFP_PULL_HIGH, + /* CHRG_USB_SUSP */ + GPIO102_GPIO, + /* DISPLAY_ENABLE */ + GPIO106_GPIO, + /* DOCK_DETECT */ + GPIO116_GPIO | MFP_LPM_FLOAT | MFP_PULL_FLOAT, + + /* LCD */ + GPIO54_LCD_LDD_0, + GPIO55_LCD_LDD_1, + GPIO56_LCD_LDD_2, + GPIO57_LCD_LDD_3, + GPIO58_LCD_LDD_4, + GPIO59_LCD_LDD_5, + GPIO60_LCD_LDD_6, + GPIO61_LCD_LDD_7, + GPIO62_LCD_LDD_8, + GPIO63_LCD_LDD_9, + GPIO64_LCD_LDD_10, + GPIO65_LCD_LDD_11, + GPIO66_LCD_LDD_12, + GPIO67_LCD_LDD_13, + GPIO68_LCD_LDD_14, + GPIO69_LCD_LDD_15, + GPIO70_LCD_LDD_16, + GPIO71_LCD_LDD_17, + GPIO72_LCD_FCLK, + GPIO73_LCD_LCLK, + GPIO74_LCD_PCLK, + GPIO75_LCD_BIAS, +}; + +static mfp_cfg_t raumfeld_connector_pin_config[] __initdata = { + /* UART1 */ + GPIO77_UART1_RXD, + GPIO78_UART1_TXD, + GPIO79_UART1_CTS, + GPIO81_UART1_DSR, + GPIO83_UART1_DTR, + GPIO84_UART1_RTS, + + /* UART3 */ + GPIO110_UART3_RXD, + + /* USB Host */ + GPIO0_2_USBH_PEN, + GPIO1_2_USBH_PWR, + + /* I2C */ + GPIO21_I2C_SCL | MFP_LPM_FLOAT | MFP_PULL_FLOAT, + GPIO22_I2C_SDA | MFP_LPM_FLOAT | MFP_PULL_FLOAT, + + /* SPI */ + GPIO34_GPIO, /* SPDIF_CS */ + GPIO96_GPIO, /* MCLK_CS */ + GPIO125_GPIO, /* ACCEL_CS */ + + /* MMC */ + GPIO3_MMC1_DAT0, + GPIO4_MMC1_DAT1, + GPIO5_MMC1_DAT2, + GPIO6_MMC1_DAT3, + GPIO7_MMC1_CLK, + GPIO8_MMC1_CMD, + + /* Ethernet */ + GPIO1_nCS2, /* CS */ + GPIO40_GPIO | MFP_PULL_HIGH, /* IRQ */ + + /* SSP for I2S */ + GPIO85_SSP1_SCLK, + GPIO89_SSP1_EXTCLK, + GPIO86_SSP1_FRM, + GPIO87_SSP1_TXD, + GPIO88_SSP1_RXD, + GPIO90_SSP1_SYSCLK, + + /* SSP2 for S/PDIF */ + GPIO25_SSP2_SCLK, + GPIO26_SSP2_FRM, + GPIO27_SSP2_TXD, + GPIO29_SSP2_EXTCLK, + + /* LEDs */ + GPIO35_GPIO | MFP_LPM_PULL_LOW, + GPIO36_GPIO | MFP_LPM_DRIVE_HIGH, +}; + +static mfp_cfg_t raumfeld_speaker_pin_config[] __initdata = { + /* UART1 */ + GPIO77_UART1_RXD, + GPIO78_UART1_TXD, + GPIO79_UART1_CTS, + GPIO81_UART1_DSR, + GPIO83_UART1_DTR, + GPIO84_UART1_RTS, + + /* UART3 */ + GPIO110_UART3_RXD, + + /* USB Host */ + GPIO0_2_USBH_PEN, + GPIO1_2_USBH_PWR, + + /* I2C */ + GPIO21_I2C_SCL | MFP_LPM_FLOAT | MFP_PULL_FLOAT, + GPIO22_I2C_SDA | MFP_LPM_FLOAT | MFP_PULL_FLOAT, + + /* SPI */ + GPIO34_GPIO, /* SPDIF_CS */ + GPIO96_GPIO, /* MCLK_CS */ + GPIO125_GPIO, /* ACCEL_CS */ + + /* MMC */ + GPIO3_MMC1_DAT0, + GPIO4_MMC1_DAT1, + GPIO5_MMC1_DAT2, + GPIO6_MMC1_DAT3, + GPIO7_MMC1_CLK, + GPIO8_MMC1_CMD, + + /* Ethernet */ + GPIO1_nCS2, /* CS */ + GPIO40_GPIO | MFP_PULL_HIGH, /* IRQ */ + + /* SSP for I2S */ + GPIO85_SSP1_SCLK, + GPIO89_SSP1_EXTCLK, + GPIO86_SSP1_FRM, + GPIO87_SSP1_TXD, + GPIO88_SSP1_RXD, + GPIO90_SSP1_SYSCLK, + + /* LEDs */ + GPIO35_GPIO | MFP_LPM_PULL_LOW, + GPIO36_GPIO | MFP_LPM_DRIVE_HIGH, +}; + +/* + * SMSC LAN9220 Ethernet + */ + +static struct resource smc91x_resources[] = { + { + .start = PXA3xx_CS2_PHYS, + .end = PXA3xx_CS2_PHYS + 0xfffff, + .flags = IORESOURCE_MEM, + }, + { + .start = gpio_to_irq(GPIO_ETH_IRQ), + .end = gpio_to_irq(GPIO_ETH_IRQ), + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING, + } +}; + +static struct smsc911x_platform_config raumfeld_smsc911x_config = { + .phy_interface = PHY_INTERFACE_MODE_MII, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, + .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, +}; + +static struct platform_device smc91x_device = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, + .dev = { + .platform_data = &raumfeld_smsc911x_config, + } +}; + +/** + * NAND + */ + +static struct mtd_partition raumfeld_nand_partitions[] = { + { + .name = "Bootloader", + .offset = 0, + .size = 0xa0000, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + { + .name = "BootloaderEnvironment", + .offset = 0xa0000, + .size = 0x20000, + }, + { + .name = "BootloaderSplashScreen", + .offset = 0xc0000, + .size = 0x60000, + }, + { + .name = "UBI", + .offset = 0x120000, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct pxa3xx_nand_platform_data raumfeld_nand_info = { + .enable_arbiter = 1, + .keep_config = 1, + .parts = raumfeld_nand_partitions, + .nr_parts = ARRAY_SIZE(raumfeld_nand_partitions), +}; + +/** + * USB (OHCI) support + */ + +static struct pxaohci_platform_data raumfeld_ohci_info = { + .port_mode = PMM_GLOBAL_MODE, + .flags = ENABLE_PORT1, +}; + +/** + * Rotary encoder input device + */ + +static struct rotary_encoder_platform_data raumfeld_rotary_encoder_info = { + .steps = 24, + .axis = REL_X, + .relative_axis = 1, + .gpio_a = GPIO_VOLENC_A, + .gpio_b = GPIO_VOLENC_B, + .inverted_a = 1, + .inverted_b = 0, +}; + +static struct platform_device rotary_encoder_device = { + .name = "rotary-encoder", + .id = 0, + .dev = { + .platform_data = &raumfeld_rotary_encoder_info, + } +}; + +/** + * GPIO buttons + */ + +static struct gpio_keys_button gpio_keys_button[] = { + { + .code = KEY_F1, + .type = EV_KEY, + .gpio = GPIO_KEY1, + .active_low = 1, + .wakeup = 0, + .debounce_interval = 5, /* ms */ + .desc = "Button 1", + }, + { + .code = KEY_F2, + .type = EV_KEY, + .gpio = GPIO_KEY2, + .active_low = 1, + .wakeup = 0, + .debounce_interval = 5, /* ms */ + .desc = "Button 2", + }, + { + .code = KEY_F3, + .type = EV_KEY, + .gpio = GPIO_KEY3, + .active_low = 1, + .wakeup = 0, + .debounce_interval = 5, /* ms */ + .desc = "Button 3", + }, + { + .code = KEY_F4, + .type = EV_KEY, + .gpio = GPIO_RESCUE_BOOT, + .active_low = 0, + .wakeup = 0, + .debounce_interval = 5, /* ms */ + .desc = "rescue boot button", + }, + { + .code = KEY_F5, + .type = EV_KEY, + .gpio = GPIO_DOCK_DETECT, + .active_low = 1, + .wakeup = 0, + .debounce_interval = 5, /* ms */ + .desc = "dock detect", + }, + { + .code = KEY_F6, + .type = EV_KEY, + .gpio = GPIO_ON_OFF, + .active_low = 0, + .wakeup = 0, + .debounce_interval = 5, /* ms */ + .desc = "on/off button", + }, +}; + +static struct gpio_keys_platform_data gpio_keys_platform_data = { + .buttons = gpio_keys_button, + .nbuttons = ARRAY_SIZE(gpio_keys_button), + .rep = 0, +}; + +static struct platform_device raumfeld_gpio_keys_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &gpio_keys_platform_data, + } +}; + +/** + * GPIO LEDs + */ + +static struct gpio_led raumfeld_leds[] = { + { + .name = "raumfeld:1", + .gpio = GPIO_LED1, + .active_low = 1, + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, + { + .name = "raumfeld:2", + .gpio = GPIO_LED2, + .active_low = 0, + .default_state = LEDS_GPIO_DEFSTATE_OFF, + } +}; + +static struct gpio_led_platform_data raumfeld_led_platform_data = { + .leds = raumfeld_leds, + .num_leds = ARRAY_SIZE(raumfeld_leds), +}; + +static struct platform_device raumfeld_led_device = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &raumfeld_led_platform_data, + }, +}; + +/** + * One-wire (W1 bus) support + */ + +static void w1_enable_external_pullup(int enable) +{ + gpio_set_value(GPIO_W1_PULLUP_ENABLE, enable); + msleep(100); +} + +static struct w1_gpio_platform_data w1_gpio_platform_data = { + .pin = GPIO_ONE_WIRE, + .is_open_drain = 0, + .enable_external_pullup = w1_enable_external_pullup, +}; + +struct platform_device raumfeld_w1_gpio_device = { + .name = "w1-gpio", + .dev = { + .platform_data = &w1_gpio_platform_data + } +}; + +static void __init raumfeld_w1_init(void) +{ + int ret = gpio_request(GPIO_W1_PULLUP_ENABLE, + "W1 external pullup enable"); + + if (ret < 0) + pr_warning("Unable to request GPIO_W1_PULLUP_ENABLE\n"); + else + gpio_direction_output(GPIO_W1_PULLUP_ENABLE, 0); + + platform_device_register(&raumfeld_w1_gpio_device); +} + +/** + * Framebuffer device + */ + +/* PWM controlled backlight */ +static struct platform_pwm_backlight_data raumfeld_pwm_backlight_data = { + .pwm_id = 0, + .max_brightness = 100, + .dft_brightness = 100, + /* 10000 ns = 10 ms ^= 100 kHz */ + .pwm_period_ns = 10000, +}; + +static struct platform_device raumfeld_pwm_backlight_device = { + .name = "pwm-backlight", + .dev = { + .parent = &pxa27x_device_pwm0.dev, + .platform_data = &raumfeld_pwm_backlight_data, + } +}; + +/* LT3593 controlled backlight */ +static struct gpio_led raumfeld_lt3593_led = { + .name = "backlight", + .gpio = mfp_to_gpio(MFP_PIN_GPIO17), + .default_state = LEDS_GPIO_DEFSTATE_ON, +}; + +static struct gpio_led_platform_data raumfeld_lt3593_platform_data = { + .leds = &raumfeld_lt3593_led, + .num_leds = 1, +}; + +static struct platform_device raumfeld_lt3593_device = { + .name = "leds-lt3593", + .id = -1, + .dev = { + .platform_data = &raumfeld_lt3593_platform_data, + }, +}; + +static struct pxafb_mode_info sharp_lq043t3dx02_mode = { + .pixclock = 111000, + .xres = 480, + .yres = 272, + .bpp = 16, + .hsync_len = 4, + .left_margin = 2, + .right_margin = 1, + .vsync_len = 1, + .upper_margin = 3, + .lower_margin = 1, + .sync = 0, +}; + +static struct pxafb_mach_info raumfeld_sharp_lcd_info = { + .modes = &sharp_lq043t3dx02_mode, + .num_modes = 1, + .video_mem_size = 0x400000, + .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, +}; + +static void __init raumfeld_lcd_init(void) +{ + int ret; + + set_pxa_fb_info(&raumfeld_sharp_lcd_info); + + /* Earlier devices had the backlight regulator controlled + * via PWM, later versions use another controller for that */ + if ((system_rev & 0xff) < 2) { + mfp_cfg_t raumfeld_pwm_pin_config = GPIO17_PWM0_OUT; + pxa3xx_mfp_config(&raumfeld_pwm_pin_config, 1); + platform_device_register(&raumfeld_pwm_backlight_device); + } else + platform_device_register(&raumfeld_lt3593_device); + + ret = gpio_request(GPIO_TFT_VA_EN, "display VA enable"); + if (ret < 0) + pr_warning("Unable to request GPIO_TFT_VA_EN\n"); + else + gpio_direction_output(GPIO_TFT_VA_EN, 1); + + ret = gpio_request(GPIO_DISPLAY_ENABLE, "display enable"); + if (ret < 0) + pr_warning("Unable to request GPIO_DISPLAY_ENABLE\n"); + else + gpio_direction_output(GPIO_DISPLAY_ENABLE, 1); +} + +/** + * SPI devices + */ + +struct spi_gpio_platform_data raumfeld_spi_platform_data = { + .sck = GPIO_SPI_CLK, + .mosi = GPIO_SPI_MOSI, + .miso = GPIO_SPI_MISO, + .num_chipselect = 3, +}; + +static struct platform_device raumfeld_spi_device = { + .name = "spi_gpio", + .id = 0, + .dev = { + .platform_data = &raumfeld_spi_platform_data, + } +}; + +static struct lis3lv02d_platform_data lis3_pdata = { + .click_flags = LIS3_CLICK_SINGLE_X | + LIS3_CLICK_SINGLE_Y | + LIS3_CLICK_SINGLE_Z, + .irq_cfg = LIS3_IRQ1_CLICK | LIS3_IRQ2_CLICK, + .wakeup_flags = LIS3_WAKEUP_X_LO | LIS3_WAKEUP_X_HI | + LIS3_WAKEUP_Y_LO | LIS3_WAKEUP_Y_HI | + LIS3_WAKEUP_Z_LO | LIS3_WAKEUP_Z_HI, + .wakeup_thresh = 10, + .click_thresh_x = 10, + .click_thresh_y = 10, + .click_thresh_z = 10, +}; + +#define SPI_AK4104 \ +{ \ + .modalias = "ak4104", \ + .max_speed_hz = 10000, \ + .bus_num = 0, \ + .chip_select = 0, \ + .controller_data = (void *) GPIO_SPDIF_CS, \ +} + +#define SPI_LIS3 \ +{ \ + .modalias = "lis3lv02d_spi", \ + .max_speed_hz = 1000000, \ + .bus_num = 0, \ + .chip_select = 1, \ + .controller_data = (void *) GPIO_ACCEL_CS, \ + .platform_data = &lis3_pdata, \ + .irq = gpio_to_irq(GPIO_ACCEL_IRQ), \ +} + +#define SPI_DAC7512 \ +{ \ + .modalias = "dac7512", \ + .max_speed_hz = 1000000, \ + .bus_num = 0, \ + .chip_select = 2, \ + .controller_data = (void *) GPIO_MCLK_DAC_CS, \ +} + +static struct spi_board_info connector_spi_devices[] __initdata = { + SPI_AK4104, + SPI_DAC7512, +}; + +static struct spi_board_info speaker_spi_devices[] __initdata = { + SPI_DAC7512, +}; + +static struct spi_board_info controller_spi_devices[] __initdata = { + SPI_LIS3, +}; + +/** + * MMC for Marvell Libertas 8688 via SDIO + */ + +static int raumfeld_mci_init(struct device *dev, irq_handler_t isr, void *data) +{ + gpio_set_value(GPIO_W2W_RESET, 1); + gpio_set_value(GPIO_W2W_PDN, 1); + + return 0; +} + +static void raumfeld_mci_exit(struct device *dev, void *data) +{ + gpio_set_value(GPIO_W2W_RESET, 0); + gpio_set_value(GPIO_W2W_PDN, 0); +} + +static struct pxamci_platform_data raumfeld_mci_platform_data = { + .init = raumfeld_mci_init, + .exit = raumfeld_mci_exit, + .detect_delay = 20, + .gpio_card_detect = -1, + .gpio_card_ro = -1, + .gpio_power = -1, +}; + +/* + * External power / charge logic + */ + +static int power_supply_init(struct device *dev) +{ + return 0; +} + +static void power_supply_exit(struct device *dev) +{ +} + +static int raumfeld_is_ac_online(void) +{ + return !gpio_get_value(GPIO_CHARGE_DC_OK); +} + +static int raumfeld_is_usb_online(void) +{ + return 0; +} + +static char *raumfeld_power_supplicants[] = { "ds2760-battery.0" }; + +static struct pda_power_pdata power_supply_info = { + .init = power_supply_init, + .is_ac_online = raumfeld_is_ac_online, + .is_usb_online = raumfeld_is_usb_online, + .exit = power_supply_exit, + .supplied_to = raumfeld_power_supplicants, + .num_supplicants = ARRAY_SIZE(raumfeld_power_supplicants) +}; + +static struct resource power_supply_resources[] = { + { + .name = "ac", + .flags = IORESOURCE_IRQ | + IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE, + .start = GPIO_CHARGE_DC_OK, + .end = GPIO_CHARGE_DC_OK, + }, +}; + +static irqreturn_t charge_done_irq(int irq, void *dev_id) +{ + struct power_supply *psy; + + psy = power_supply_get_by_name("ds2760-battery.0"); + + if (psy) + power_supply_set_battery_charged(psy); + + return IRQ_HANDLED; +} + +static struct platform_device raumfeld_power_supply = { + .name = "pda-power", + .id = -1, + .dev = { + .platform_data = &power_supply_info, + }, + .resource = power_supply_resources, + .num_resources = ARRAY_SIZE(power_supply_resources), +}; + +static void __init raumfeld_power_init(void) +{ + int ret; + + /* Set PEN2 high to enable maximum charge current */ + ret = gpio_request(GPIO_CHRG_PEN2, "CHRG_PEN2"); + if (ret < 0) + pr_warning("Unable to request GPIO_CHRG_PEN2\n"); + else + gpio_direction_output(GPIO_CHRG_PEN2, 1); + + ret = gpio_request(GPIO_CHARGE_DC_OK, "CABLE_DC_OK"); + if (ret < 0) + pr_warning("Unable to request GPIO_CHARGE_DC_OK\n"); + + ret = gpio_request(GPIO_CHARGE_USB_SUSP, "CHARGE_USB_SUSP"); + if (ret < 0) + pr_warning("Unable to request GPIO_CHARGE_USB_SUSP\n"); + else + gpio_direction_output(GPIO_CHARGE_USB_SUSP, 0); + + power_supply_resources[0].start = gpio_to_irq(GPIO_CHARGE_DC_OK); + power_supply_resources[0].end = gpio_to_irq(GPIO_CHARGE_DC_OK); + + ret = request_irq(gpio_to_irq(GPIO_CHARGE_DONE), + &charge_done_irq, IORESOURCE_IRQ_LOWEDGE, + "charge_done", NULL); + + if (ret < 0) + printk(KERN_ERR "%s: unable to register irq %d\n", __func__, + GPIO_CHARGE_DONE); + else + platform_device_register(&raumfeld_power_supply); +} + +/* Fixed regulator for AUDIO_VA, 0-0048 maps to the cs4270 codec device */ + +static struct regulator_consumer_supply audio_va_consumer_supply = + REGULATOR_SUPPLY("va", "0-0048"); + +struct regulator_init_data audio_va_initdata = { + .consumer_supplies = &audio_va_consumer_supply, + .num_consumer_supplies = 1, + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, +}; + +static struct fixed_voltage_config audio_va_config = { + .supply_name = "audio_va", + .microvolts = 5000000, + .gpio = GPIO_AUDIO_VA_ENABLE, + .enable_high = 1, + .enabled_at_boot = 0, + .init_data = &audio_va_initdata, +}; + +static struct platform_device audio_va_device = { + .name = "reg-fixed-voltage", + .id = 0, + .dev = { + .platform_data = &audio_va_config, + }, +}; + +/* Dummy supplies for Codec's VD/VLC */ + +static struct regulator_consumer_supply audio_dummy_supplies[] = { + REGULATOR_SUPPLY("vd", "0-0048"), + REGULATOR_SUPPLY("vlc", "0-0048"), +}; + +struct regulator_init_data audio_dummy_initdata = { + .consumer_supplies = audio_dummy_supplies, + .num_consumer_supplies = ARRAY_SIZE(audio_dummy_supplies), + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, +}; + +static struct fixed_voltage_config audio_dummy_config = { + .supply_name = "audio_vd", + .microvolts = 3300000, + .gpio = -1, + .init_data = &audio_dummy_initdata, +}; + +static struct platform_device audio_supply_dummy_device = { + .name = "reg-fixed-voltage", + .id = 1, + .dev = { + .platform_data = &audio_dummy_config, + }, +}; + +static struct platform_device *audio_regulator_devices[] = { + &audio_va_device, + &audio_supply_dummy_device, +}; + +/** + * Regulator support via MAX8660 + */ + +static struct regulator_consumer_supply vcc_mmc_supply = + REGULATOR_SUPPLY("vmmc", "pxa2xx-mci.0"); + +static struct regulator_init_data vcc_mmc_init_data = { + .constraints = { + .min_uV = 3300000, + .max_uV = 3300000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .valid_ops_mask = REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_MODE, + }, + .consumer_supplies = &vcc_mmc_supply, + .num_consumer_supplies = 1, +}; + +struct max8660_subdev_data max8660_v6_subdev_data = { + .id = MAX8660_V6, + .name = "vmmc", + .platform_data = &vcc_mmc_init_data, +}; + +static struct max8660_platform_data max8660_pdata = { + .subdevs = &max8660_v6_subdev_data, + .num_subdevs = 1, +}; + +/** + * I2C devices + */ + +static struct i2c_board_info raumfeld_pwri2c_board_info = { + .type = "max8660", + .addr = 0x34, + .platform_data = &max8660_pdata, +}; + +static struct i2c_board_info raumfeld_connector_i2c_board_info __initdata = { + .type = "cs4270", + .addr = 0x48, +}; + +static struct eeti_ts_platform_data eeti_ts_pdata = { + .irq_active_high = 1, +}; + +static struct i2c_board_info raumfeld_controller_i2c_board_info __initdata = { + .type = "eeti_ts", + .addr = 0x0a, + .irq = gpio_to_irq(GPIO_TOUCH_IRQ), + .platform_data = &eeti_ts_pdata, +}; + +static struct platform_device *raumfeld_common_devices[] = { + &raumfeld_gpio_keys_device, + &raumfeld_led_device, + &raumfeld_spi_device, +}; + +static void __init raumfeld_audio_init(void) +{ + int ret; + + ret = gpio_request(GPIO_CODEC_RESET, "cs4270 reset"); + if (ret < 0) + pr_warning("unable to request GPIO_CODEC_RESET\n"); + else + gpio_direction_output(GPIO_CODEC_RESET, 1); + + ret = gpio_request(GPIO_SPDIF_RESET, "ak4104 s/pdif reset"); + if (ret < 0) + pr_warning("unable to request GPIO_SPDIF_RESET\n"); + else + gpio_direction_output(GPIO_SPDIF_RESET, 1); + + ret = gpio_request(GPIO_MCLK_RESET, "MCLK reset"); + if (ret < 0) + pr_warning("unable to request GPIO_MCLK_RESET\n"); + else + gpio_direction_output(GPIO_MCLK_RESET, 1); + + platform_add_devices(ARRAY_AND_SIZE(audio_regulator_devices)); +} + +static void __init raumfeld_common_init(void) +{ + int ret; + + /* The on/off button polarity has changed after revision 1 */ + if ((system_rev & 0xff) > 1) { + int i; + + for (i = 0; i < ARRAY_SIZE(gpio_keys_button); i++) + if (!strcmp(gpio_keys_button[i].desc, "on/off button")) + gpio_keys_button[i].active_low = 1; + } + + enable_irq_wake(IRQ_WAKEUP0); + + pxa3xx_set_nand_info(&raumfeld_nand_info); + pxa3xx_set_i2c_power_info(NULL); + pxa_set_ohci_info(&raumfeld_ohci_info); + pxa_set_mci_info(&raumfeld_mci_platform_data); + pxa_set_i2c_info(NULL); + pxa_set_ffuart_info(NULL); + + ret = gpio_request(GPIO_W2W_RESET, "Wi2Wi reset"); + if (ret < 0) + pr_warning("Unable to request GPIO_W2W_RESET\n"); + else + gpio_direction_output(GPIO_W2W_RESET, 0); + + ret = gpio_request(GPIO_W2W_PDN, "Wi2Wi powerup"); + if (ret < 0) + pr_warning("Unable to request GPIO_W2W_PDN\n"); + else + gpio_direction_output(GPIO_W2W_PDN, 0); + + /* this can be used to switch off the device */ + ret = gpio_request(GPIO_SHUTDOWN_SUPPLY, + "supply shutdown"); + if (ret < 0) + pr_warning("Unable to request GPIO_SHUTDOWN_SUPPLY\n"); + else + gpio_direction_output(GPIO_SHUTDOWN_SUPPLY, 0); + + platform_add_devices(ARRAY_AND_SIZE(raumfeld_common_devices)); + i2c_register_board_info(1, &raumfeld_pwri2c_board_info, 1); +} + +static void __init raumfeld_controller_init(void) +{ + int ret; + + pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_controller_pin_config)); + platform_device_register(&rotary_encoder_device); + spi_register_board_info(ARRAY_AND_SIZE(controller_spi_devices)); + i2c_register_board_info(0, &raumfeld_controller_i2c_board_info, 1); + + ret = gpio_request(GPIO_SHUTDOWN_BATT, "battery shutdown"); + if (ret < 0) + pr_warning("Unable to request GPIO_SHUTDOWN_BATT\n"); + else + gpio_direction_output(GPIO_SHUTDOWN_BATT, 0); + + raumfeld_common_init(); + raumfeld_power_init(); + raumfeld_lcd_init(); + raumfeld_w1_init(); +} + +static void __init raumfeld_connector_init(void) +{ + pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_connector_pin_config)); + spi_register_board_info(ARRAY_AND_SIZE(connector_spi_devices)); + i2c_register_board_info(0, &raumfeld_connector_i2c_board_info, 1); + + platform_device_register(&smc91x_device); + + raumfeld_audio_init(); + raumfeld_common_init(); +} + +static void __init raumfeld_speaker_init(void) +{ + pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_speaker_pin_config)); + spi_register_board_info(ARRAY_AND_SIZE(speaker_spi_devices)); + i2c_register_board_info(0, &raumfeld_connector_i2c_board_info, 1); + + platform_device_register(&smc91x_device); + platform_device_register(&rotary_encoder_device); + + raumfeld_audio_init(); + raumfeld_common_init(); +} + +/* physical memory regions */ +#define RAUMFELD_SDRAM_BASE 0xa0000000 /* SDRAM region */ + +#ifdef CONFIG_MACH_RAUMFELD_RC +MACHINE_START(RAUMFELD_RC, "Raumfeld Controller") + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = RAUMFELD_SDRAM_BASE + 0x100, + .init_machine = raumfeld_controller_init, + .map_io = pxa_map_io, + .init_irq = pxa3xx_init_irq, + .timer = &pxa_timer, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_RAUMFELD_CONNECTOR +MACHINE_START(RAUMFELD_CONNECTOR, "Raumfeld Connector") + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = RAUMFELD_SDRAM_BASE + 0x100, + .init_machine = raumfeld_connector_init, + .map_io = pxa_map_io, + .init_irq = pxa3xx_init_irq, + .timer = &pxa_timer, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_RAUMFELD_SPEAKER +MACHINE_START(RAUMFELD_SPEAKER, "Raumfeld Speaker") + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = RAUMFELD_SDRAM_BASE + 0x100, + .init_machine = raumfeld_speaker_init, + .map_io = pxa_map_io, + .init_irq = pxa3xx_init_irq, + .timer = &pxa_timer, +MACHINE_END +#endif diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 28352c0b8c3..19b5109d980 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -56,25 +56,7 @@ static unsigned long spitz_pin_config[] __initdata = { GPIO80_nCS_4, /* SCOOP #1 */ /* LCD - 16bpp Active TFT */ - GPIO58_LCD_LDD_0, - GPIO59_LCD_LDD_1, - GPIO60_LCD_LDD_2, - GPIO61_LCD_LDD_3, - GPIO62_LCD_LDD_4, - GPIO63_LCD_LDD_5, - GPIO64_LCD_LDD_6, - GPIO65_LCD_LDD_7, - GPIO66_LCD_LDD_8, - GPIO67_LCD_LDD_9, - GPIO68_LCD_LDD_10, - GPIO69_LCD_LDD_11, - GPIO70_LCD_LDD_12, - GPIO71_LCD_LDD_13, - GPIO72_LCD_LDD_14, - GPIO73_LCD_LDD_15, - GPIO74_LCD_FCLK, - GPIO75_LCD_LCLK, - GPIO76_LCD_PCLK, + GPIOxx_LCD_TFT_16BPP, /* PC Card */ GPIO48_nPOE, diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c index 9ebe658590f..a81d6dbf662 100644 --- a/arch/arm/mach-pxa/ssp.c +++ b/arch/arm/mach-pxa/ssp.c @@ -35,6 +35,8 @@ #include <mach/ssp.h> #include <mach/regs-ssp.h> +#ifdef CONFIG_PXA_SSP_LEGACY + #define TIMEOUT 100000 static irqreturn_t ssp_interrupt(int irq, void *dev_id) @@ -303,6 +305,7 @@ void ssp_exit(struct ssp_dev *dev) clk_disable(ssp->clk); ssp_free(ssp); } +#endif /* CONFIG_PXA_SSP_LEGACY */ static DEFINE_MUTEX(ssp_lock); static LIST_HEAD(ssp_list); @@ -488,6 +491,7 @@ static void __exit pxa_ssp_exit(void) arch_initcall(pxa_ssp_init); module_exit(pxa_ssp_exit); +#ifdef CONFIG_PXA_SSP_LEGACY EXPORT_SYMBOL(ssp_write_word); EXPORT_SYMBOL(ssp_read_word); EXPORT_SYMBOL(ssp_flush); @@ -498,6 +502,7 @@ EXPORT_SYMBOL(ssp_restore_state); EXPORT_SYMBOL(ssp_init); EXPORT_SYMBOL(ssp_exit); EXPORT_SYMBOL(ssp_config); +#endif MODULE_DESCRIPTION("PXA SSP driver"); MODULE_AUTHOR("Liam Girdwood"); diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c index 750c448db67..293e40aeaf2 100644 --- a/arch/arm/mach-pxa/time.c +++ b/arch/arm/mach-pxa/time.c @@ -76,14 +76,12 @@ pxa_ost0_interrupt(int irq, void *dev_id) static int pxa_osmr0_set_next_event(unsigned long delta, struct clock_event_device *dev) { - unsigned long flags, next, oscr; + unsigned long next, oscr; - raw_local_irq_save(flags); OIER |= OIER_E0; next = OSCR + delta; OSMR0 = next; oscr = OSCR; - raw_local_irq_restore(flags); return (signed)(next - oscr) <= MIN_OSCR_DELTA ? -ETIME : 0; } @@ -91,23 +89,17 @@ pxa_osmr0_set_next_event(unsigned long delta, struct clock_event_device *dev) static void pxa_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *dev) { - unsigned long irqflags; - switch (mode) { case CLOCK_EVT_MODE_ONESHOT: - raw_local_irq_save(irqflags); OIER &= ~OIER_E0; OSSR = OSSR_M0; - raw_local_irq_restore(irqflags); break; case CLOCK_EVT_MODE_UNUSED: case CLOCK_EVT_MODE_SHUTDOWN: /* initializing, released, or preparing for suspend */ - raw_local_irq_save(irqflags); OIER &= ~OIER_E0; OSSR = OSSR_M0; - raw_local_irq_restore(irqflags); break; case CLOCK_EVT_MODE_RESUME: diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index c854c168a45..ad552791c4c 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -32,6 +32,7 @@ #include <linux/gpio.h> #include <linux/pda_power.h> #include <linux/spi/spi.h> +#include <linux/input/matrix_keypad.h> #include <asm/setup.h> #include <asm/mach-types.h> @@ -131,24 +132,24 @@ static unsigned long tosa_pin_config[] = { GPIO45_BTUART_RTS, /* Keybd */ - GPIO58_GPIO | MFP_LPM_DRIVE_LOW, - GPIO59_GPIO | MFP_LPM_DRIVE_LOW, - GPIO60_GPIO | MFP_LPM_DRIVE_LOW, - GPIO61_GPIO | MFP_LPM_DRIVE_LOW, - GPIO62_GPIO | MFP_LPM_DRIVE_LOW, - GPIO63_GPIO | MFP_LPM_DRIVE_LOW, - GPIO64_GPIO | MFP_LPM_DRIVE_LOW, - GPIO65_GPIO | MFP_LPM_DRIVE_LOW, - GPIO66_GPIO | MFP_LPM_DRIVE_LOW, - GPIO67_GPIO | MFP_LPM_DRIVE_LOW, - GPIO68_GPIO | MFP_LPM_DRIVE_LOW, - GPIO69_GPIO | MFP_LPM_DRIVE_LOW, - GPIO70_GPIO | MFP_LPM_DRIVE_LOW, - GPIO71_GPIO | MFP_LPM_DRIVE_LOW, - GPIO72_GPIO | MFP_LPM_DRIVE_LOW, - GPIO73_GPIO | MFP_LPM_DRIVE_LOW, - GPIO74_GPIO | MFP_LPM_DRIVE_LOW, - GPIO75_GPIO | MFP_LPM_DRIVE_LOW, + GPIO58_GPIO | MFP_LPM_DRIVE_LOW, /* Column 0 */ + GPIO59_GPIO | MFP_LPM_DRIVE_LOW, /* Column 1 */ + GPIO60_GPIO | MFP_LPM_DRIVE_LOW, /* Column 2 */ + GPIO61_GPIO | MFP_LPM_DRIVE_LOW, /* Column 3 */ + GPIO62_GPIO | MFP_LPM_DRIVE_LOW, /* Column 4 */ + GPIO63_GPIO | MFP_LPM_DRIVE_LOW, /* Column 5 */ + GPIO64_GPIO | MFP_LPM_DRIVE_LOW, /* Column 6 */ + GPIO65_GPIO | MFP_LPM_DRIVE_LOW, /* Column 7 */ + GPIO66_GPIO | MFP_LPM_DRIVE_LOW, /* Column 8 */ + GPIO67_GPIO | MFP_LPM_DRIVE_LOW, /* Column 9 */ + GPIO68_GPIO | MFP_LPM_DRIVE_LOW, /* Column 10 */ + GPIO69_GPIO | MFP_LPM_DRIVE_LOW, /* Row 0 */ + GPIO70_GPIO | MFP_LPM_DRIVE_LOW, /* Row 1 */ + GPIO71_GPIO | MFP_LPM_DRIVE_LOW, /* Row 2 */ + GPIO72_GPIO | MFP_LPM_DRIVE_LOW, /* Row 3 */ + GPIO73_GPIO | MFP_LPM_DRIVE_LOW, /* Row 4 */ + GPIO74_GPIO | MFP_LPM_DRIVE_LOW, /* Row 5 */ + GPIO75_GPIO | MFP_LPM_DRIVE_LOW, /* Row 6 */ /* SPI */ GPIO81_SSP2_CLK_OUT, @@ -411,9 +412,87 @@ static struct platform_device tosa_power_device = { /* * Tosa Keyboard */ +static const uint32_t tosakbd_keymap[] = { + KEY(0, 2, KEY_W), + KEY(0, 6, KEY_K), + KEY(0, 7, KEY_BACKSPACE), + KEY(0, 8, KEY_P), + KEY(1, 1, KEY_Q), + KEY(1, 2, KEY_E), + KEY(1, 3, KEY_T), + KEY(1, 4, KEY_Y), + KEY(1, 6, KEY_O), + KEY(1, 7, KEY_I), + KEY(1, 8, KEY_COMMA), + KEY(2, 1, KEY_A), + KEY(2, 2, KEY_D), + KEY(2, 3, KEY_G), + KEY(2, 4, KEY_U), + KEY(2, 6, KEY_L), + KEY(2, 7, KEY_ENTER), + KEY(2, 8, KEY_DOT), + KEY(3, 1, KEY_Z), + KEY(3, 2, KEY_C), + KEY(3, 3, KEY_V), + KEY(3, 4, KEY_J), + KEY(3, 5, TOSA_KEY_ADDRESSBOOK), + KEY(3, 6, TOSA_KEY_CANCEL), + KEY(3, 7, TOSA_KEY_CENTER), + KEY(3, 8, TOSA_KEY_OK), + KEY(3, 9, KEY_LEFTSHIFT), + KEY(4, 1, KEY_S), + KEY(4, 2, KEY_R), + KEY(4, 3, KEY_B), + KEY(4, 4, KEY_N), + KEY(4, 5, TOSA_KEY_CALENDAR), + KEY(4, 6, TOSA_KEY_HOMEPAGE), + KEY(4, 7, KEY_LEFTCTRL), + KEY(4, 8, TOSA_KEY_LIGHT), + KEY(4, 10, KEY_RIGHTSHIFT), + KEY(5, 1, KEY_TAB), + KEY(5, 2, KEY_SLASH), + KEY(5, 3, KEY_H), + KEY(5, 4, KEY_M), + KEY(5, 5, TOSA_KEY_MENU), + KEY(5, 7, KEY_UP), + KEY(5, 11, TOSA_KEY_FN), + KEY(6, 1, KEY_X), + KEY(6, 2, KEY_F), + KEY(6, 3, KEY_SPACE), + KEY(6, 4, KEY_APOSTROPHE), + KEY(6, 5, TOSA_KEY_MAIL), + KEY(6, 6, KEY_LEFT), + KEY(6, 7, KEY_DOWN), + KEY(6, 8, KEY_RIGHT), +}; + +static struct matrix_keymap_data tosakbd_keymap_data = { + .keymap = tosakbd_keymap, + .keymap_size = ARRAY_SIZE(tosakbd_keymap), +}; + +static const int tosakbd_col_gpios[] = + { 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68 }; +static const int tosakbd_row_gpios[] = + { 69, 70, 71, 72, 73, 74, 75 }; + +static struct matrix_keypad_platform_data tosakbd_pdata = { + .keymap_data = &tosakbd_keymap_data, + .row_gpios = tosakbd_row_gpios, + .col_gpios = tosakbd_col_gpios, + .num_row_gpios = ARRAY_SIZE(tosakbd_row_gpios), + .num_col_gpios = ARRAY_SIZE(tosakbd_col_gpios), + .col_scan_delay_us = 10, + .debounce_ms = 10, + .wakeup = 1, +}; + static struct platform_device tosakbd_device = { - .name = "tosa-keyboard", + .name = "matrix-keypad", .id = -1, + .dev = { + .platform_data = &tosakbd_pdata, + }, }; static struct gpio_keys_button tosa_gpio_keys[] = { diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index 0aa858ebc57..797f2544d0c 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -72,27 +72,14 @@ static unsigned long trizeps4_pin_config[] __initdata = { GPIO79_nCS_3, /* Logic CS */ GPIO0_GPIO | WAKEUP_ON_EDGE_RISE, /* Logic irq */ + /* AC97 */ + GPIO28_AC97_BITCLK, + GPIO29_AC97_SDATA_IN_0, + GPIO30_AC97_SDATA_OUT, + GPIO31_AC97_SYNC, + /* LCD - 16bpp Active TFT */ - GPIO58_LCD_LDD_0, - GPIO59_LCD_LDD_1, - GPIO60_LCD_LDD_2, - GPIO61_LCD_LDD_3, - GPIO62_LCD_LDD_4, - GPIO63_LCD_LDD_5, - GPIO64_LCD_LDD_6, - GPIO65_LCD_LDD_7, - GPIO66_LCD_LDD_8, - GPIO67_LCD_LDD_9, - GPIO68_LCD_LDD_10, - GPIO69_LCD_LDD_11, - GPIO70_LCD_LDD_12, - GPIO71_LCD_LDD_13, - GPIO72_LCD_LDD_14, - GPIO73_LCD_LDD_15, - GPIO74_LCD_FCLK, - GPIO75_LCD_LCLK, - GPIO76_LCD_PCLK, - GPIO77_LCD_BIAS, + GPIOxx_LCD_TFT_16BPP, /* UART */ GPIO9_FFUART_CTS, diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index 89f258c9e12..1dd13346f97 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -281,7 +281,7 @@ static void viper_irq_handler(unsigned int irq, struct irq_desc *desc) do { /* we're in a chained irq handler, * so ack the interrupt by hand */ - GEDR(VIPER_CPLD_GPIO) = GPIO_bit(VIPER_CPLD_GPIO); + desc->chip->ack(irq); if (likely(pending)) { irq = viper_bit_to_irq(__ffs(pending)); @@ -711,6 +711,12 @@ static mfp_cfg_t viper_pin_config[] __initdata = { GPIO80_nCS_4, GPIO33_nCS_5, + /* AC97 */ + GPIO28_AC97_BITCLK, + GPIO29_AC97_SDATA_IN_0, + GPIO30_AC97_SDATA_OUT, + GPIO31_AC97_SYNC, + /* FP Backlight */ GPIO9_GPIO, /* VIPER_BCKLIGHT_EN_GPIO */ GPIO10_GPIO, /* VIPER_LCD_EN_GPIO */ diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index 75f2a37f945..39896d88358 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -26,6 +26,7 @@ #include <linux/i2c.h> #include <linux/i2c/pca953x.h> #include <linux/apm-emulation.h> +#include <linux/can/platform/mcp251x.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -387,11 +388,47 @@ static struct pxa2xx_spi_master pxa2xx_spi_ssp3_master_info = { .enable_dma = 1, }; -static struct platform_device pxa2xx_spi_ssp3_device = { - .name = "pxa2xx-spi", - .id = 3, - .dev = { - .platform_data = &pxa2xx_spi_ssp3_master_info, +/* CAN bus on SPI */ +static int zeus_mcp2515_setup(struct spi_device *sdev) +{ + int err; + + err = gpio_request(ZEUS_CAN_SHDN_GPIO, "CAN shutdown"); + if (err) + return err; + + err = gpio_direction_output(ZEUS_CAN_SHDN_GPIO, 1); + if (err) { + gpio_free(ZEUS_CAN_SHDN_GPIO); + return err; + } + + return 0; +} + +static int zeus_mcp2515_transceiver_enable(int enable) +{ + gpio_set_value(ZEUS_CAN_SHDN_GPIO, !enable); + return 0; +} + +static struct mcp251x_platform_data zeus_mcp2515_pdata = { + .oscillator_frequency = 16*1000*1000, + .model = CAN_MCP251X_MCP2515, + .board_specific_setup = zeus_mcp2515_setup, + .transceiver_enable = zeus_mcp2515_transceiver_enable, + .power_enable = zeus_mcp2515_transceiver_enable, +}; + +static struct spi_board_info zeus_spi_board_info[] = { + [0] = { + .modalias = "mcp251x", + .platform_data = &zeus_mcp2515_pdata, + .irq = gpio_to_irq(ZEUS_CAN_GPIO), + .max_speed_hz = 1*1000*1000, + .bus_num = 3, + .mode = SPI_MODE_0, + .chip_select = 0, }, }; @@ -457,15 +494,28 @@ static struct platform_device zeus_pcmcia_device = { }, }; +static struct resource zeus_max6369_resource = { + .start = ZEUS_CPLD_EXTWDOG_PHYS, + .end = ZEUS_CPLD_EXTWDOG_PHYS, + .flags = IORESOURCE_MEM, +}; + +struct platform_device zeus_max6369_device = { + .name = "max6369_wdt", + .id = -1, + .resource = &zeus_max6369_resource, + .num_resources = 1, +}; + static struct platform_device *zeus_devices[] __initdata = { &zeus_serial_device, &zeus_mtd_devices[0], &zeus_dm9k0_device, &zeus_dm9k1_device, &zeus_sram_device, - &pxa2xx_spi_ssp3_device, &zeus_leds_device, &zeus_pcmcia_device, + &zeus_max6369_device, }; /* AC'97 */ @@ -509,7 +559,9 @@ static void zeus_ohci_exit(struct device *dev) static struct pxaohci_platform_data zeus_ohci_platform_data = { .port_mode = PMM_NPS_MODE, - .flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW, + /* Clear Power Control Polarity Low and set Power Sense + * Polarity Low. Supply power to USB ports. */ + .flags = ENABLE_PORT_ALL | POWER_SENSE_LOW, .init = zeus_ohci_init, .exit = zeus_ohci_exit, }; @@ -621,11 +673,15 @@ static struct pxa2xx_udc_mach_info zeus_udc_info = { .udc_command = zeus_udc_command, }; +#ifdef CONFIG_PM static void zeus_power_off(void) { local_irq_disable(); pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP); } +#else +#define zeus_power_off NULL +#endif #ifdef CONFIG_APM_EMULATION static void zeus_get_power_status(struct apm_power_info *info) @@ -706,6 +762,12 @@ static struct i2c_board_info __initdata zeus_i2c_devices[] = { }; static mfp_cfg_t zeus_pin_config[] __initdata = { + /* AC97 */ + GPIO28_AC97_BITCLK, + GPIO29_AC97_SDATA_IN_0, + GPIO30_AC97_SDATA_OUT, + GPIO31_AC97_SYNC, + GPIO15_nCS_1, GPIO78_nCS_2, GPIO80_nCS_4, @@ -731,6 +793,11 @@ static mfp_cfg_t zeus_pin_config[] __initdata = { GPIO104_CIF_DD_2, GPIO105_CIF_DD_1, + GPIO81_SSP3_TXD, + GPIO82_SSP3_RXD, + GPIO83_SSP3_SFRM, + GPIO84_SSP3_SCLK, + GPIO48_nPOE, GPIO49_nPWE, GPIO50_nPIOR, @@ -785,6 +852,8 @@ static void __init zeus_init(void) pxa_set_ac97_info(&zeus_ac97_info); pxa_set_i2c_info(NULL); i2c_register_board_info(0, ARRAY_AND_SIZE(zeus_i2c_devices)); + pxa2xx_set_spi_info(3, &pxa2xx_spi_ssp3_master_info); + spi_register_board_info(zeus_spi_board_info, ARRAY_SIZE(zeus_spi_board_info)); } static struct map_desc zeus_io_desc[] __initdata = { @@ -807,12 +876,6 @@ static struct map_desc zeus_io_desc[] __initdata = { .type = MT_DEVICE, }, { - .virtual = ZEUS_CPLD_EXTWDOG, - .pfn = __phys_to_pfn(ZEUS_CPLD_EXTWDOG_PHYS), - .length = 0x1000, - .type = MT_DEVICE, - }, - { .virtual = ZEUS_PC104IO, .pfn = __phys_to_pfn(ZEUS_PC104IO_PHYS), .length = 0x00800000, @@ -837,7 +900,7 @@ static void __init zeus_map_io(void) PCFR = PCFR_OPDE | PCFR_DC_EN | PCFR_FS | PCFR_FP; } -MACHINE_START(ARCOM_ZEUS, "Arcom ZEUS") +MACHINE_START(ARCOM_ZEUS, "Arcom/Eurotech ZEUS") /* Maintainer: Marc Zyngier <maz@misterjones.org> */ .phys_io = 0x40000000, .io_pg_offst = ((io_p2v(0x40000000) >> 18) & 0xfffc), diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c index 63b753f56c6..0d8e043804c 100644 --- a/arch/arm/mach-s3c2410/dma.c +++ b/arch/arm/mach-s3c2410/dma.c @@ -21,7 +21,7 @@ #include <mach/dma.h> #include <plat/cpu.h> -#include <plat/dma-plat.h> +#include <plat/dma-s3c24xx.h> #include <plat/regs-serial.h> #include <mach/regs-gpio.h> diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-core.h b/arch/arm/mach-s3c2410/include/mach/gpio-track.h index f8b879a7973..acb25910380 100644 --- a/arch/arm/mach-s3c2410/include/mach/gpio-core.h +++ b/arch/arm/mach-s3c2410/include/mach/gpio-track.h @@ -15,7 +15,6 @@ #ifndef __ASM_ARCH_GPIO_CORE_H #define __ASM_ARCH_GPIO_CORE_H __FILE__ -#include <plat/gpio-core.h> #include <mach/regs-gpio.h> extern struct s3c_gpio_chip s3c24xx_gpios[]; diff --git a/arch/arm/plat-s3c24xx/include/plat/pm-core.h b/arch/arm/mach-s3c2410/include/mach/pm-core.h index fb45dd9adca..70a83b209e2 100644 --- a/arch/arm/plat-s3c24xx/include/plat/pm-core.h +++ b/arch/arm/mach-s3c2410/include/mach/pm-core.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s3c24xx/include/plat/pll.h +/* linux/arch/arm/mach-s3c2410/include/pm-core.h * * Copyright 2008 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h index ebc85c6dadb..fd672f330bf 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h @@ -406,31 +406,31 @@ #define S3C2443_GPE5_SD1_CLK (0x02 << 10) #define S3C2400_GPE5_EINT5 (0x02 << 10) #define S3C2400_GPE5_TCLK1 (0x03 << 10) +#define S3C2443_GPE5_AC_BITCLK (0x03 << 10) #define S3C2410_GPE6_SDCMD (0x02 << 12) #define S3C2443_GPE6_SD1_CMD (0x02 << 12) -#define S3C2443_GPE6_AC_BITCLK (0x03 << 12) +#define S3C2443_GPE6_AC_SDI (0x03 << 12) #define S3C2400_GPE6_EINT6 (0x02 << 12) #define S3C2410_GPE7_SDDAT0 (0x02 << 14) #define S3C2443_GPE5_SD1_DAT0 (0x02 << 14) -#define S3C2443_GPE7_AC_SDI (0x03 << 14) +#define S3C2443_GPE7_AC_SDO (0x03 << 14) #define S3C2400_GPE7_EINT7 (0x02 << 14) #define S3C2410_GPE8_SDDAT1 (0x02 << 16) #define S3C2443_GPE8_SD1_DAT1 (0x02 << 16) -#define S3C2443_GPE8_AC_SDO (0x03 << 16) +#define S3C2443_GPE8_AC_SYNC (0x03 << 16) #define S3C2400_GPE8_nXDACK0 (0x02 << 16) #define S3C2410_GPE9_SDDAT2 (0x02 << 18) #define S3C2443_GPE9_SD1_DAT2 (0x02 << 18) -#define S3C2443_GPE9_AC_SYNC (0x03 << 18) +#define S3C2443_GPE9_AC_nRESET (0x03 << 18) #define S3C2400_GPE9_nXDACK1 (0x02 << 18) #define S3C2400_GPE9_nXBACK (0x03 << 18) #define S3C2410_GPE10_SDDAT3 (0x02 << 20) #define S3C2443_GPE10_SD1_DAT3 (0x02 << 20) -#define S3C2443_GPE10_AC_nRESET (0x03 << 20) #define S3C2400_GPE10_nXDREQ0 (0x02 << 20) #define S3C2410_GPE11_SPIMISO0 (0x02 << 22) diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h index 6026d091a2f..d87ebe0cb62 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h @@ -42,23 +42,14 @@ #define S3C2443_PLLCON_OFF (1<<24) -#define S3C2443_CLKSRC_I2S_EXT (1<<14) -#define S3C2443_CLKSRC_I2S_EPLLDIV (0<<14) -#define S3C2443_CLKSRC_I2S_EPLLREF (2<<14) -#define S3C2443_CLKSRC_I2S_EPLLREF3 (3<<14) -#define S3C2443_CLKSRC_I2S_MASK (3<<14) - #define S3C2443_CLKSRC_EPLLREF_XTAL (2<<7) #define S3C2443_CLKSRC_EPLLREF_EXTCLK (3<<7) #define S3C2443_CLKSRC_EPLLREF_MPLLREF (0<<7) #define S3C2443_CLKSRC_EPLLREF_MPLLREF2 (1<<7) #define S3C2443_CLKSRC_EPLLREF_MASK (3<<7) -#define S3C2443_CLKSRC_ESYSCLK_EPLL (1<<6) -#define S3C2443_CLKSRC_MSYSCLK_MPLL (1<<4) #define S3C2443_CLKSRC_EXTCLK_DIV (1<<3) -#define S3C2443_CLKDIV0_DVS (1<<13) #define S3C2443_CLKDIV0_HALF_HCLK (1<<3) #define S3C2443_CLKDIV0_HALF_PCLK (1<<2) @@ -81,28 +72,7 @@ #define S3C2443_CLKDIV0_ARMDIV_12 (13<<9) #define S3C2443_CLKDIV0_ARMDIV_16 (15<<9) -/* S3C2443_CLKDIV1 */ - -#define S3C2443_CLKDIV1_CAMDIV_MASK (15<<26) -#define S3C2443_CLKDIV1_CAMDIV_SHIFT (26) - -#define S3C2443_CLKDIV1_HSSPIDIV_MASK (3<<24) -#define S3C2443_CLKDIV1_HSSPIDIV_SHIFT (24) - -#define S3C2443_CLKDIV1_DISPDIV_MASK (0xff<<16) -#define S3C2443_CLKDIV1_DISPDIV_SHIFT (16) - -#define S3C2443_CLKDIV1_I2SDIV_MASK (15<<12) -#define S3C2443_CLKDIV1_I2SDIV_SHIFT (12) - -#define S3C2443_CLKDIV1_UARTDIV_MASK (15<<8) -#define S3C2443_CLKDIV1_UARTDIV_SHIFT (8) - -#define S3C2443_CLKDIV1_HSMMCDIV_MASK (3<<6) -#define S3C2443_CLKDIV1_HSMMCDIV_SHIFT (6) - -#define S3C2443_CLKDIV1_USBHOSTDIV_MASK (3<<4) -#define S3C2443_CLKDIV1_USBHOSTDIV_SHIFT (4) +/* S3C2443_CLKDIV1 removed, only used in clock.c code */ #define S3C2443_CLKCON_NAND diff --git a/arch/arm/plat-s3c/include/mach/timex.h b/arch/arm/mach-s3c2410/include/mach/timex.h index 2a425ed0a7e..fe9ca1ffd51 100644 --- a/arch/arm/plat-s3c/include/mach/timex.h +++ b/arch/arm/mach-s3c2410/include/mach/timex.h @@ -19,8 +19,6 @@ * for the time conversion functions to/from jiffies is acceptable. */ - #define CLOCK_TICK_RATE 12000000 - #endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/plat-s3c/include/mach/vmalloc.h b/arch/arm/mach-s3c2410/include/mach/vmalloc.h index 299d95f365c..315b0078a34 100644 --- a/arch/arm/plat-s3c/include/mach/vmalloc.h +++ b/arch/arm/mach-s3c2410/include/mach/vmalloc.h @@ -1,4 +1,4 @@ -/* arch/arm/plat-s3c/include/mach/vmalloc.h +/* arch/arm/mach-s3c2410/include/mach/vmalloc.h * * from arch/arm/mach-iop3xx/include/mach/vmalloc.h * @@ -15,6 +15,6 @@ #ifndef __ASM_ARCH_VMALLOC_H #define __ASM_ARCH_VMALLOC_H -#define VMALLOC_END (0xe0000000UL) +#define VMALLOC_END (0xE0000000) #endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c index 06a84adfb13..7047317ed7f 100644 --- a/arch/arm/mach-s3c2410/mach-amlm5900.c +++ b/arch/arm/mach-s3c2410/mach-amlm5900.c @@ -153,7 +153,7 @@ static struct platform_device *amlm5900_devices[] __initdata = { &s3c_device_adc, &s3c_device_wdt, &s3c_device_i2c0, - &s3c_device_usb, + &s3c_device_ohci, &s3c_device_rtc, &s3c_device_usbgadget, &s3c_device_sdi, diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index 97162fdd059..02b1b6220cb 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -584,7 +584,7 @@ static struct s3c_hwmon_pdata bast_hwmon_info = { // cat /sys/devices/platform/s3c24xx-adc/s3c-hwmon/in_0 static struct platform_device *bast_devices[] __initdata = { - &s3c_device_usb, + &s3c_device_ohci, &s3c_device_lcd, &s3c_device_wdt, &s3c_device_i2c0, diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index 1e34abe1a19..fbedd076094 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -196,7 +196,7 @@ static struct platform_device h1940_device_bluetooth = { .id = -1, }; -static struct s3c24xx_mci_pdata h1940_mmc_cfg = { +static struct s3c24xx_mci_pdata h1940_mmc_cfg __initdata = { .gpio_detect = S3C2410_GPF(5), .gpio_wprotect = S3C2410_GPH(8), .set_power = NULL, @@ -272,7 +272,7 @@ static struct platform_device h1940_lcd_powerdev = { static struct platform_device *h1940_devices[] __initdata = { &s3c_device_ts, - &s3c_device_usb, + &s3c_device_ohci, &s3c_device_lcd, &s3c_device_wdt, &s3c_device_i2c0, @@ -311,12 +311,11 @@ static void __init h1940_init(void) u32 tmp; s3c24xx_fb_set_platdata(&h1940_fb_info); + s3c24xx_mci_set_platdata(&h1940_mmc_cfg); s3c24xx_udc_set_platdata(&h1940_udc_cfg); s3c24xx_ts_set_platdata(&h1940_ts_cfg); s3c_i2c0_set_platdata(NULL); - s3c_device_sdi.dev.platform_data = &h1940_mmc_cfg; - /* Turn off suspend on both USB ports, and switch the * selectable USB port to USB device mode. */ diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c index 0405712c226..684710f8814 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c2410/mach-n30.c @@ -322,7 +322,7 @@ static struct platform_device *n30_devices[] __initdata = { &s3c_device_wdt, &s3c_device_i2c0, &s3c_device_iis, - &s3c_device_usb, + &s3c_device_ohci, &s3c_device_usbgadget, &n30_button_device, &n30_blue_led, diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c index f6c7261a4a1..d8c7f2efc1a 100644 --- a/arch/arm/mach-s3c2410/mach-otom.c +++ b/arch/arm/mach-s3c2410/mach-otom.c @@ -92,7 +92,7 @@ static struct platform_device otom_device_nor = { /* Standard OTOM devices */ static struct platform_device *otom11_devices[] __initdata = { - &s3c_device_usb, + &s3c_device_ohci, &s3c_device_lcd, &s3c_device_wdt, &s3c_device_i2c0, diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c index ab092bcda39..92a4ec375d8 100644 --- a/arch/arm/mach-s3c2410/mach-qt2410.c +++ b/arch/arm/mach-s3c2410/mach-qt2410.c @@ -246,7 +246,7 @@ static struct platform_device qt2410_spi = { /* Board devices */ static struct platform_device *qt2410_devices[] __initdata = { - &s3c_device_usb, + &s3c_device_ohci, &s3c_device_lcd, &s3c_device_wdt, &s3c_device_i2c0, diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c index c49126ccb1d..45222304220 100644 --- a/arch/arm/mach-s3c2410/mach-smdk2410.c +++ b/arch/arm/mach-s3c2410/mach-smdk2410.c @@ -87,7 +87,7 @@ static struct s3c2410_uartcfg smdk2410_uartcfgs[] __initdata = { }; static struct platform_device *smdk2410_devices[] __initdata = { - &s3c_device_usb, + &s3c_device_ohci, &s3c_device_lcd, &s3c_device_wdt, &s3c_device_i2c0, diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c2410/mach-tct_hammer.c index 8fdb0430bd4..929164a8e9b 100644 --- a/arch/arm/mach-s3c2410/mach-tct_hammer.c +++ b/arch/arm/mach-s3c2410/mach-tct_hammer.c @@ -129,7 +129,7 @@ static struct platform_device *tct_hammer_devices[] __initdata = { &s3c_device_adc, &s3c_device_wdt, &s3c_device_i2c0, - &s3c_device_usb, + &s3c_device_ohci, &s3c_device_rtc, &s3c_device_usbgadget, &s3c_device_sdi, diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c index 0d61fb57717..9051f0d3112 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c2410/mach-vr1000.c @@ -334,7 +334,7 @@ static struct i2c_board_info vr1000_i2c_devs[] __initdata = { /* devices for this board */ static struct platform_device *vr1000_devices[] __initdata = { - &s3c_device_usb, + &s3c_device_ohci, &s3c_device_lcd, &s3c_device_wdt, &s3c_device_i2c0, diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c index 6b9d0d83a6f..29bd3d987be 100644 --- a/arch/arm/mach-s3c2410/usb-simtec.c +++ b/arch/arm/mach-s3c2410/usb-simtec.c @@ -91,7 +91,7 @@ static void usb_simtec_enableoc(struct s3c2410_hcd_info *info, int on) } } -static struct s3c2410_hcd_info usb_simtec_info = { +static struct s3c2410_hcd_info usb_simtec_info __initdata = { .port[0] = { .flags = S3C_HCDFLG_USED }, @@ -127,6 +127,6 @@ int usb_simtec_init(void) gpio_direction_output(S3C2410_GPB(4), 1); gpio_direction_input(S3C2410_GPG(10)); - s3c_device_usb.dev.platform_data = &usb_simtec_info; + s3c_ohci_set_platdata(&usb_simtec_info); return 0; } diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c2412/clock.c index a037df5e1c2..0c0505b025c 100644 --- a/arch/arm/mach-s3c2412/clock.c +++ b/arch/arm/mach-s3c2412/clock.c @@ -124,7 +124,9 @@ static struct clk clk_usysclk = { .name = "usysclk", .id = -1, .parent = &clk_xtal, - .set_parent = s3c2412_setparent_usysclk, + .ops = &(struct clk_ops) { + .set_parent = s3c2412_setparent_usysclk, + }, }; static struct clk clk_mrefclk = { @@ -199,10 +201,12 @@ static int s3c2412_setrate_usbsrc(struct clk *clk, unsigned long rate) static struct clk clk_usbsrc = { .name = "usbsrc", .id = -1, - .get_rate = s3c2412_getrate_usbsrc, - .set_rate = s3c2412_setrate_usbsrc, - .round_rate = s3c2412_roundrate_usbsrc, - .set_parent = s3c2412_setparent_usbsrc, + .ops = &(struct clk_ops) { + .get_rate = s3c2412_getrate_usbsrc, + .set_rate = s3c2412_setrate_usbsrc, + .round_rate = s3c2412_roundrate_usbsrc, + .set_parent = s3c2412_setparent_usbsrc, + }, }; static int s3c2412_setparent_msysclk(struct clk *clk, struct clk *parent) @@ -225,7 +229,9 @@ static int s3c2412_setparent_msysclk(struct clk *clk, struct clk *parent) static struct clk clk_msysclk = { .name = "msysclk", .id = -1, - .set_parent = s3c2412_setparent_msysclk, + .ops = &(struct clk_ops) { + .set_parent = s3c2412_setparent_msysclk, + }, }; static int s3c2412_setparent_armclk(struct clk *clk, struct clk *parent) @@ -264,7 +270,9 @@ static struct clk clk_armclk = { .name = "armclk", .id = -1, .parent = &clk_msysclk, - .set_parent = s3c2412_setparent_armclk, + .ops = &(struct clk_ops) { + .set_parent = s3c2412_setparent_armclk, + }, }; /* these next clocks have an divider immediately after them, @@ -337,10 +345,12 @@ static int s3c2412_setrate_uart(struct clk *clk, unsigned long rate) static struct clk clk_uart = { .name = "uartclk", .id = -1, - .get_rate = s3c2412_getrate_uart, - .set_rate = s3c2412_setrate_uart, - .set_parent = s3c2412_setparent_uart, - .round_rate = s3c2412_roundrate_clksrc, + .ops = &(struct clk_ops) { + .get_rate = s3c2412_getrate_uart, + .set_rate = s3c2412_setrate_uart, + .set_parent = s3c2412_setparent_uart, + .round_rate = s3c2412_roundrate_clksrc, + }, }; static int s3c2412_setparent_i2s(struct clk *clk, struct clk *parent) @@ -388,10 +398,12 @@ static int s3c2412_setrate_i2s(struct clk *clk, unsigned long rate) static struct clk clk_i2s = { .name = "i2sclk", .id = -1, - .get_rate = s3c2412_getrate_i2s, - .set_rate = s3c2412_setrate_i2s, - .set_parent = s3c2412_setparent_i2s, - .round_rate = s3c2412_roundrate_clksrc, + .ops = &(struct clk_ops) { + .get_rate = s3c2412_getrate_i2s, + .set_rate = s3c2412_setrate_i2s, + .set_parent = s3c2412_setparent_i2s, + .round_rate = s3c2412_roundrate_clksrc, + }, }; static int s3c2412_setparent_cam(struct clk *clk, struct clk *parent) @@ -438,10 +450,12 @@ static int s3c2412_setrate_cam(struct clk *clk, unsigned long rate) static struct clk clk_cam = { .name = "camif-upll", /* same as 2440 name */ .id = -1, - .get_rate = s3c2412_getrate_cam, - .set_rate = s3c2412_setrate_cam, - .set_parent = s3c2412_setparent_cam, - .round_rate = s3c2412_roundrate_clksrc, + .ops = &(struct clk_ops) { + .get_rate = s3c2412_getrate_cam, + .set_rate = s3c2412_setrate_cam, + .set_parent = s3c2412_setparent_cam, + .round_rate = s3c2412_roundrate_clksrc, + }, }; /* standard clock definitions */ diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c index f8d16fc10bc..e880524904e 100644 --- a/arch/arm/mach-s3c2412/dma.c +++ b/arch/arm/mach-s3c2412/dma.c @@ -20,7 +20,7 @@ #include <mach/dma.h> -#include <plat/dma-plat.h> +#include <plat/dma-s3c24xx.h> #include <plat/cpu.h> #include <plat/regs-serial.h> diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c index c9fa3fca486..14f4798291a 100644 --- a/arch/arm/mach-s3c2412/mach-jive.c +++ b/arch/arm/mach-s3c2412/mach-jive.c @@ -468,7 +468,7 @@ static struct i2c_board_info jive_i2c_devs[] __initdata = { /* The platform devices being used. */ static struct platform_device *jive_devices[] __initdata = { - &s3c_device_usb, + &s3c_device_ohci, &s3c_device_rtc, &s3c_device_wdt, &s3c_device_i2c0, diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c index 9a5e4341972..0392065af1a 100644 --- a/arch/arm/mach-s3c2412/mach-smdk2413.c +++ b/arch/arm/mach-s3c2412/mach-smdk2413.c @@ -104,8 +104,7 @@ static struct s3c2410_udc_mach_info smdk2413_udc_cfg __initdata = { static struct platform_device *smdk2413_devices[] __initdata = { - &s3c_device_usb, - //&s3c_device_lcd, + &s3c_device_ohci, &s3c_device_wdt, &s3c_device_i2c0, &s3c_device_iis, diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c index a6ba591b26b..3ca9265b699 100644 --- a/arch/arm/mach-s3c2412/mach-vstms.c +++ b/arch/arm/mach-s3c2412/mach-vstms.c @@ -121,7 +121,7 @@ static struct s3c2410_platform_nand __initdata vstms_nand_info = { }; static struct platform_device *vstms_devices[] __initdata = { - &s3c_device_usb, + &s3c_device_ohci, &s3c_device_wdt, &s3c_device_i2c0, &s3c_device_iis, diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig index 80879358eb2..7f465265cf0 100644 --- a/arch/arm/mach-s3c2440/Kconfig +++ b/arch/arm/mach-s3c2440/Kconfig @@ -15,14 +15,67 @@ config CPU_S3C2440 help Support for S3C2440 Samsung Mobile CPU based systems. +config CPU_S3C2442 + bool + depends on ARCH_S3C2410 + select CPU_ARM920T + select S3C2410_CLOCK + select S3C2410_GPIO + select S3C2410_PM if PM + select CPU_S3C244X + select CPU_LLSERIAL_S3C2440 + help + Support for S3C2442 Samsung Mobile CPU based systems. + +config CPU_S3C244X + bool + depends on ARCH_S3C2410 && (CPU_S3C2440 || CPU_S3C2442) + help + Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems. + + + +config S3C2440_CPUFREQ + bool "S3C2440/S3C2442 CPU Frequency scaling support" + depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442) + select S3C2410_CPUFREQ_UTILS + default y + help + CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs. + +config S3C2440_XTAL_12000000 + bool + help + Indicate that the build needs to support 12MHz system + crystal. + +config S3C2440_XTAL_16934400 + bool + help + Indicate that the build needs to support 16.9344MHz system + crystal. + +config S3C2440_PLL_12000000 + bool + depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000 + default y if CPU_FREQ_S3C24XX_PLL + help + PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals. + +config S3C2440_PLL_16934400 + bool + depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400 + default y if CPU_FREQ_S3C24XX_PLL + help + PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals. + config S3C2440_DMA bool depends on ARCH_S3C2410 && CPU_S3C24405B help Support for S3C2440 specific DMA code5A - -menu "S3C2440 Machines" +menu "S3C2440 and S3C2442 Machines" config MACH_ANUBIS bool "Simtec Electronics ANUBIS" @@ -37,6 +90,18 @@ config MACH_ANUBIS Say Y here if you are using the Simtec Electronics ANUBIS development system +config MACH_NEO1973_GTA02 + bool "Openmoko GTA02 / Freerunner phone" + select CPU_S3C2442 + select MFD_PCF50633 + select PCF50633_GPIO + select I2C + select POWER_SUPPLY + select MACH_NEO1973 + select S3C2410_PWM + help + Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone + config MACH_OSIRIS bool "Simtec IM2440D20 (OSIRIS) module" select CPU_S3C2440 @@ -94,11 +159,14 @@ config MACH_NEXCODER_2440 config SMDK2440_CPU2440 bool "SMDK2440 with S3C2440 CPU module" - depends on ARCH_S3C2440 default y if ARCH_S3C2440 select S3C2440_XTAL_16934400 select CPU_S3C2440 +config SMDK2440_CPU2442 + bool "SMDM2440 with S3C2442 CPU module" + select CPU_S3C2442 + config MACH_AT2440EVB bool "Avantech AT2440EVB development board" select CPU_S3C2440 diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile index 5f322453188..c85ba32d895 100644 --- a/arch/arm/mach-s3c2440/Makefile +++ b/arch/arm/mach-s3c2440/Makefile @@ -10,10 +10,20 @@ obj-n := obj- := obj-$(CONFIG_CPU_S3C2440) += s3c2440.o dsc.o +obj-$(CONFIG_CPU_S3C2442) += s3c2442.o + obj-$(CONFIG_CPU_S3C2440) += irq.o obj-$(CONFIG_CPU_S3C2440) += clock.o obj-$(CONFIG_S3C2440_DMA) += dma.o +obj-$(CONFIG_CPU_S3C244X) += s3c244x.o +obj-$(CONFIG_CPU_S3C244X) += s3c244x-irq.o +obj-$(CONFIG_CPU_S3C244X) += s3c244x-clock.o +obj-$(CONFIG_S3C2440_CPUFREQ) += s3c2440-cpufreq.o + +obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o +obj-$(CONFIG_S3C2440_PLL_16934400) += s3c2440-pll-16934400.o + # Machine support obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o @@ -23,6 +33,7 @@ obj-$(CONFIG_ARCH_S3C2440) += mach-smdk2440.o obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o obj-$(CONFIG_MACH_MINI2440) += mach-mini2440.o +obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o # extra machine support diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c2440/clock.c index d1c29b2537c..3dc2426e234 100644 --- a/arch/arm/mach-s3c2440/clock.c +++ b/arch/arm/mach-s3c2440/clock.c @@ -98,8 +98,10 @@ static struct clk s3c2440_clk_cam = { static struct clk s3c2440_clk_cam_upll = { .name = "camif-upll", .id = -1, - .set_rate = s3c2440_camif_upll_setrate, - .round_rate = s3c2440_camif_upll_round, + .ops = &(struct clk_ops) { + .set_rate = s3c2440_camif_upll_setrate, + .round_rate = s3c2440_camif_upll_round, + }, }; static struct clk s3c2440_clk_ac97 = { diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c index e08e081430f..3b0529f54e9 100644 --- a/arch/arm/mach-s3c2440/dma.c +++ b/arch/arm/mach-s3c2440/dma.c @@ -20,7 +20,7 @@ #include <mach/map.h> #include <mach/dma.h> -#include <plat/dma-plat.h> +#include <plat/dma-s3c24xx.h> #include <plat/cpu.h> #include <plat/regs-serial.h> diff --git a/arch/arm/mach-s3c2440/dsc.c b/arch/arm/mach-s3c2440/dsc.c index 55404427277..9ea66e31f62 100644 --- a/arch/arm/mach-s3c2440/dsc.c +++ b/arch/arm/mach-s3c2440/dsc.c @@ -28,7 +28,7 @@ #include <mach/regs-dsc.h> #include <plat/cpu.h> -#include <plat/s3c2440.h> +#include <plat/s3c244x.h> int s3c2440_set_dsc(unsigned int pin, unsigned int value) { diff --git a/arch/arm/mach-s3c2442/include/mach/gta02.h b/arch/arm/mach-s3c2440/include/mach/gta02.h index 953331d8d56..953331d8d56 100644 --- a/arch/arm/mach-s3c2442/include/mach/gta02.h +++ b/arch/arm/mach-s3c2440/include/mach/gta02.h diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c index 62a4c3eba97..b73f78a9da5 100644 --- a/arch/arm/mach-s3c2440/mach-anubis.c +++ b/arch/arm/mach-s3c2440/mach-anubis.c @@ -409,7 +409,7 @@ static struct platform_device anubis_device_sm501 = { /* Standard Anubis devices */ static struct platform_device *anubis_devices[] __initdata = { - &s3c_device_usb, + &s3c_device_ohci, &s3c_device_wdt, &s3c_device_adc, &s3c_device_i2c0, diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c index aa69290e04c..84725791e6b 100644 --- a/arch/arm/mach-s3c2440/mach-at2440evb.c +++ b/arch/arm/mach-s3c2440/mach-at2440evb.c @@ -165,7 +165,7 @@ static struct platform_device at2440evb_device_eth = { }, }; -static struct s3c24xx_mci_pdata at2440evb_mci_pdata = { +static struct s3c24xx_mci_pdata at2440evb_mci_pdata __initdata = { .gpio_detect = S3C2410_GPG(10), }; @@ -203,7 +203,7 @@ static struct s3c2410fb_mach_info at2440evb_fb_info __initdata = { }; static struct platform_device *at2440evb_devices[] __initdata = { - &s3c_device_usb, + &s3c_device_ohci, &s3c_device_wdt, &s3c_device_adc, &s3c_device_i2c0, @@ -216,8 +216,6 @@ static struct platform_device *at2440evb_devices[] __initdata = { static void __init at2440evb_map_io(void) { - s3c_device_sdi.dev.platform_data = &at2440evb_mci_pdata; - s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc)); s3c24xx_init_clocks(16934400); s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs)); @@ -226,6 +224,7 @@ static void __init at2440evb_map_io(void) static void __init at2440evb_init(void) { s3c24xx_fb_set_platdata(&at2440evb_fb_info); + s3c24xx_mci_set_platdata(&at2440evb_mci_pdata); s3c_nand_set_platdata(&at2440evb_nand_info); s3c_i2c0_set_platdata(NULL); diff --git a/arch/arm/mach-s3c2442/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c index 0b4a3a03071..45799c608d8 100644 --- a/arch/arm/mach-s3c2442/mach-gta02.c +++ b/arch/arm/mach-s3c2440/mach-gta02.c @@ -544,7 +544,7 @@ static struct platform_device gta02_bl_dev = { /* USB */ -static struct s3c2410_hcd_info gta02_usb_info = { +static struct s3c2410_hcd_info gta02_usb_info __initdata = { .port[0] = { .flags = S3C_HCDFLG_USED, }, @@ -565,7 +565,7 @@ static void __init gta02_map_io(void) /* These are the guys that don't need to be children of PMU. */ static struct platform_device *gta02_devices[] __initdata = { - &s3c_device_usb, + &s3c_device_ohci, &s3c_device_wdt, &s3c_device_sdi, &s3c_device_usbgadget, @@ -623,9 +623,8 @@ static void __init gta02_machine_init(void) INIT_DELAYED_WORK(>a02_charger_work, gta02_charger_worker); #endif - s3c_device_usb.dev.platform_data = >a02_usb_info; - s3c24xx_udc_set_platdata(>a02_udc_cfg); + s3c_ohci_set_platdata(>a02_usb_info); s3c_nand_set_platdata(>a02_nand_info); s3c_i2c0_set_platdata(NULL); diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c index 2068e9096a4..571b17683d9 100644 --- a/arch/arm/mach-s3c2440/mach-mini2440.c +++ b/arch/arm/mach-s3c2440/mach-mini2440.c @@ -506,9 +506,8 @@ static struct i2c_board_info mini2440_i2c_devs[] __initdata = { }; static struct platform_device *mini2440_devices[] __initdata = { - &s3c_device_usb, + &s3c_device_ohci, &s3c_device_wdt, -/* &s3c_device_adc,*/ /* ADC doesn't like living with touchscreen ! */ &s3c_device_i2c0, &s3c_device_rtc, &s3c_device_usbgadget, @@ -522,8 +521,6 @@ static struct platform_device *mini2440_devices[] __initdata = { &s3c_device_sdi, &s3c_device_iis, &mini2440_audio, -/* &s3c_device_timer[0],*/ /* buzzer pwm, no API for it */ - /* remaining devices are optional */ }; static void __init mini2440_map_io(void) @@ -531,8 +528,6 @@ static void __init mini2440_map_io(void) s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc)); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs)); - - s3c_device_sdi.dev.platform_data = &mini2440_mmc_cfg; } /* @@ -678,6 +673,7 @@ static void __init mini2440_init(void) } s3c24xx_udc_set_platdata(&mini2440_udc_cfg); + s3c24xx_mci_set_platdata(&mini2440_mmc_cfg); s3c_nand_set_platdata(&mini2440_nand_info); s3c_i2c0_set_platdata(NULL); diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c index d43edede590..342041593f2 100644 --- a/arch/arm/mach-s3c2440/mach-nexcoder.c +++ b/arch/arm/mach-s3c2440/mach-nexcoder.c @@ -41,7 +41,7 @@ #include <plat/iic.h> #include <plat/s3c2410.h> -#include <plat/s3c2440.h> +#include <plat/s3c244x.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> @@ -106,7 +106,7 @@ static struct platform_device nexcoder_device_nor = { /* Standard Nexcoder devices */ static struct platform_device *nexcoder_devices[] __initdata = { - &s3c_device_usb, + &s3c_device_ohci, &s3c_device_lcd, &s3c_device_wdt, &s3c_device_i2c0, diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c index a952a13afb1..1e836e506f8 100644 --- a/arch/arm/mach-s3c2440/mach-rx3715.c +++ b/arch/arm/mach-s3c2440/mach-rx3715.c @@ -176,7 +176,7 @@ static struct s3c2410_platform_nand __initdata rx3715_nand_info = { }; static struct platform_device *rx3715_devices[] __initdata = { - &s3c_device_usb, + &s3c_device_ohci, &s3c_device_lcd, &s3c_device_wdt, &s3c_device_i2c0, diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c index ec13e748ccc..3ac3d636d61 100644 --- a/arch/arm/mach-s3c2440/mach-smdk2440.c +++ b/arch/arm/mach-s3c2440/mach-smdk2440.c @@ -40,7 +40,7 @@ #include <plat/iic.h> #include <plat/s3c2410.h> -#include <plat/s3c2440.h> +#include <plat/s3c244x.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> @@ -150,7 +150,7 @@ static struct s3c2410fb_mach_info smdk2440_fb_info __initdata = { }; static struct platform_device *smdk2440_devices[] __initdata = { - &s3c_device_usb, + &s3c_device_ohci, &s3c_device_lcd, &s3c_device_wdt, &s3c_device_i2c0, diff --git a/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c b/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c index 49f65032f2c..f105d5e8c47 100644 --- a/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c +++ b/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c @@ -1,4 +1,4 @@ -/* arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c +/* arch/arm/mach-s3c2440/s3c2440-pll-12000000.c * * Copyright (c) 2006-2007 Simtec Electronics * http://armlinux.simtec.co.uk/ diff --git a/arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c b/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c index 7679af13a94..c8a8f90ef38 100644 --- a/arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c +++ b/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c @@ -1,4 +1,4 @@ -/* arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c +/* arch/arm/mach-s3c2440/s3c2440-pll-16934400.c * * Copyright (c) 2006-2008 Simtec Electronics * http://armlinux.simtec.co.uk/ diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c index ac1f7ea5f40..2b68f7ea45a 100644 --- a/arch/arm/mach-s3c2440/s3c2440.c +++ b/arch/arm/mach-s3c2440/s3c2440.c @@ -29,9 +29,9 @@ #include <mach/hardware.h> #include <asm/irq.h> -#include <plat/s3c2440.h> #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/s3c244x.h> static struct sys_device s3c2440_sysdev = { .cls = &s3c2440_sysclass, diff --git a/arch/arm/mach-s3c2442/clock.c b/arch/arm/mach-s3c2440/s3c2442.c index ea1aa1f5157..188ad1e57dc 100644 --- a/arch/arm/mach-s3c2442/clock.c +++ b/arch/arm/mach-s3c2440/s3c2442.c @@ -1,10 +1,10 @@ -/* linux/arch/arm/mach-s3c2442/clock.c +/* linux/arch/arm/mach-s3c2442/s3c2442.c * * Copyright (c) 2004-2005 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * - * S3C2442 Clock support + * S3C2442 core and lock support * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -109,8 +109,10 @@ static struct clk s3c2442_clk_cam = { static struct clk s3c2442_clk_cam_upll = { .name = "camif-upll", .id = -1, - .set_rate = s3c2442_camif_upll_setrate, - .round_rate = s3c2442_camif_upll_round, + .ops = &(struct clk_ops) { + .set_rate = s3c2442_camif_upll_setrate, + .round_rate = s3c2442_camif_upll_round, + }, }; static int s3c2442_clk_add(struct sys_device *sysdev) @@ -149,3 +151,15 @@ static __init int s3c2442_clk_init(void) } arch_initcall(s3c2442_clk_init); + + +static struct sys_device s3c2442_sysdev = { + .cls = &s3c2442_sysclass, +}; + +int __init s3c2442_init(void) +{ + printk("S3C2442: Initialising architecture\n"); + + return sysdev_register(&s3c2442_sysdev); +} diff --git a/arch/arm/plat-s3c24xx/s3c244x-clock.c b/arch/arm/mach-s3c2440/s3c244x-clock.c index 79371091aa3..f8d96130d1d 100644 --- a/arch/arm/plat-s3c24xx/s3c244x-clock.c +++ b/arch/arm/mach-s3c2440/s3c244x-clock.c @@ -68,7 +68,9 @@ static int s3c2440_setparent_armclk(struct clk *clk, struct clk *parent) static struct clk clk_arm = { .name = "armclk", .id = -1, - .set_parent = s3c2440_setparent_armclk, + .ops = &(struct clk_ops) { + .set_parent = s3c2440_setparent_armclk, + }, }; static int s3c244x_clk_add(struct sys_device *sysdev) diff --git a/arch/arm/plat-s3c24xx/s3c244x-irq.c b/arch/arm/mach-s3c2440/s3c244x-irq.c index a75c0c2431e..a75c0c2431e 100644 --- a/arch/arm/plat-s3c24xx/s3c244x-irq.c +++ b/arch/arm/mach-s3c2440/s3c244x-irq.c diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/mach-s3c2440/s3c244x.c index 12623a474b5..5e4a97e7653 100644 --- a/arch/arm/plat-s3c24xx/s3c244x.c +++ b/arch/arm/mach-s3c2440/s3c244x.c @@ -38,8 +38,7 @@ #include <mach/regs-dsc.h> #include <plat/s3c2410.h> -#include <plat/s3c2440.h> -#include "s3c244x.h" +#include <plat/s3c244x.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-s3c2442/Kconfig b/arch/arm/mach-s3c2442/Kconfig deleted file mode 100644 index 8d3811852fc..00000000000 --- a/arch/arm/mach-s3c2442/Kconfig +++ /dev/null @@ -1,37 +0,0 @@ -# Copyright 2007 Simtec Electronics -# -# Licensed under GPLv2 - -config CPU_S3C2442 - bool - depends on ARCH_S3C2410 - select CPU_ARM920T - select S3C2410_CLOCK - select S3C2410_GPIO - select S3C2410_PM if PM - select CPU_S3C244X - select CPU_LLSERIAL_S3C2440 - help - Support for S3C2442 Samsung Mobile CPU based systems. - - -menu "S3C2442 Machines" - -config SMDK2440_CPU2442 - bool "SMDM2440 with S3C2442 CPU module" - depends on ARCH_S3C2440 - select CPU_S3C2442 - -config MACH_NEO1973_GTA02 - bool "Openmoko GTA02 / Freerunner phone" - select CPU_S3C2442 - select MFD_PCF50633 - select PCF50633_GPIO - select I2C - select POWER_SUPPLY - select MACH_NEO1973 - select S3C2410_PWM - help - Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone - -endmenu diff --git a/arch/arm/mach-s3c2442/Makefile b/arch/arm/mach-s3c2442/Makefile deleted file mode 100644 index 2a19113a576..00000000000 --- a/arch/arm/mach-s3c2442/Makefile +++ /dev/null @@ -1,18 +0,0 @@ -# arch/arm/mach-s3c2442/Makefile -# -# Copyright 2007 Simtec Electronics -# -# Licensed under GPLv2 - -obj-y := -obj-m := -obj-n := -obj- := - -obj-$(CONFIG_CPU_S3C2442) += s3c2442.o -obj-$(CONFIG_CPU_S3C2442) += clock.o - -obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o - -# Machine support - diff --git a/arch/arm/mach-s3c2442/s3c2442.c b/arch/arm/mach-s3c2442/s3c2442.c deleted file mode 100644 index 4663bdc7fff..00000000000 --- a/arch/arm/mach-s3c2442/s3c2442.c +++ /dev/null @@ -1,34 +0,0 @@ -/* linux/arch/arm/mach-s3c2442/s3c2442.c - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Samsung S3C2442 Mobile CPU support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/sysdev.h> - -#include <plat/s3c2442.h> -#include <plat/cpu.h> - -static struct sys_device s3c2442_sysdev = { - .cls = &s3c2442_sysclass, -}; - -int __init s3c2442_init(void) -{ - printk("S3C2442: Initialising architecture\n"); - - return sysdev_register(&s3c2442_sysdev); -} diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig index 4314c442490..698140af247 100644 --- a/arch/arm/mach-s3c2443/Kconfig +++ b/arch/arm/mach-s3c2443/Kconfig @@ -7,6 +7,7 @@ config CPU_S3C2443 depends on ARCH_S3C2410 select S3C2443_DMA if S3C2410_DMA select CPU_LLSERIAL_S3C2440 + select SAMSUNG_CLKSRC help Support for the S3C2443 SoC from the S3C24XX line diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c index 2785d69c95b..62cd4eaee01 100644 --- a/arch/arm/mach-s3c2443/clock.c +++ b/arch/arm/mach-s3c2443/clock.c @@ -1,6 +1,6 @@ /* linux/arch/arm/mach-s3c2443/clock.c * - * Copyright (c) 2007 Simtec Electronics + * Copyright (c) 2007, 2010 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * S3C2443 Clock control support @@ -42,6 +42,7 @@ #include <plat/s3c2443.h> #include <plat/clock.h> +#include <plat/clock-clksrc.h> #include <plat/cpu.h> /* We currently have to assume that the system is running @@ -53,141 +54,69 @@ * set the correct muxing at initialisation */ -static int s3c2443_clkcon_enable_h(struct clk *clk, int enable) -{ - unsigned int clocks = clk->ctrlbit; - unsigned long clkcon; - - clkcon = __raw_readl(S3C2443_HCLKCON); - - if (enable) - clkcon |= clocks; - else - clkcon &= ~clocks; - - __raw_writel(clkcon, S3C2443_HCLKCON); - - return 0; -} - -static int s3c2443_clkcon_enable_p(struct clk *clk, int enable) +static int s3c2443_gate(void __iomem *reg, struct clk *clk, int enable) { - unsigned int clocks = clk->ctrlbit; - unsigned long clkcon; - - clkcon = __raw_readl(S3C2443_PCLKCON); + u32 ctrlbit = clk->ctrlbit; + u32 con = __raw_readl(reg); if (enable) - clkcon |= clocks; + con |= ctrlbit; else - clkcon &= ~clocks; - - __raw_writel(clkcon, S3C2443_PCLKCON); + con &= ~ctrlbit; + __raw_writel(con, reg); return 0; } -static int s3c2443_clkcon_enable_s(struct clk *clk, int enable) -{ - unsigned int clocks = clk->ctrlbit; - unsigned long clkcon; - - clkcon = __raw_readl(S3C2443_SCLKCON); - - if (enable) - clkcon |= clocks; - else - clkcon &= ~clocks; - - __raw_writel(clkcon, S3C2443_SCLKCON); - - return 0; -} - -static unsigned long s3c2443_roundrate_clksrc(struct clk *clk, - unsigned long rate, - unsigned int max) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - int div; - - if (rate > parent_rate) - return parent_rate; - - /* note, we remove the +/- 1 calculations as they cancel out */ - - div = (rate / parent_rate); - - if (div < 1) - div = 1; - else if (div > max) - div = max; - - return parent_rate / div; -} - -static unsigned long s3c2443_roundrate_clksrc4(struct clk *clk, - unsigned long rate) +static int s3c2443_clkcon_enable_h(struct clk *clk, int enable) { - return s3c2443_roundrate_clksrc(clk, rate, 4); + return s3c2443_gate(S3C2443_HCLKCON, clk, enable); } -static unsigned long s3c2443_roundrate_clksrc16(struct clk *clk, - unsigned long rate) +static int s3c2443_clkcon_enable_p(struct clk *clk, int enable) { - return s3c2443_roundrate_clksrc(clk, rate, 16); + return s3c2443_gate(S3C2443_PCLKCON, clk, enable); } -static unsigned long s3c2443_roundrate_clksrc256(struct clk *clk, - unsigned long rate) +static int s3c2443_clkcon_enable_s(struct clk *clk, int enable) { - return s3c2443_roundrate_clksrc(clk, rate, 256); + return s3c2443_gate(S3C2443_SCLKCON, clk, enable); } /* clock selections */ +/* mpllref is a direct descendant of clk_xtal by default, but it is not + * elided as the EPLL can be either sourced by the XTAL or EXTCLK and as + * such directly equating the two source clocks is impossible. + */ static struct clk clk_mpllref = { .name = "mpllref", .parent = &clk_xtal, .id = -1, }; -#if 0 -static struct clk clk_mpll = { - .name = "mpll", - .parent = &clk_mpllref, - .id = -1, -}; -#endif - static struct clk clk_i2s_ext = { .name = "i2s-ext", .id = -1, }; -static int s3c2443_setparent_epllref(struct clk *clk, struct clk *parent) -{ - unsigned long clksrc = __raw_readl(S3C2443_CLKSRC); - - clksrc &= ~S3C2443_CLKSRC_EPLLREF_MASK; - - if (parent == &clk_xtal) - clksrc |= S3C2443_CLKSRC_EPLLREF_XTAL; - else if (parent == &clk_ext) - clksrc |= S3C2443_CLKSRC_EPLLREF_EXTCLK; - else if (parent != &clk_mpllref) - return -EINVAL; - - __raw_writel(clksrc, S3C2443_CLKSRC); - clk->parent = parent; - - return 0; -} +static struct clk *clk_epllref_sources[] = { + [0] = &clk_mpllref, + [1] = &clk_mpllref, + [2] = &clk_xtal, + [3] = &clk_ext, +}; -static struct clk clk_epllref = { - .name = "epllref", - .id = -1, - .set_parent = s3c2443_setparent_epllref, +static struct clksrc_clk clk_epllref = { + .clk = { + .name = "epllref", + .id = -1, + }, + .sources = &(struct clksrc_sources) { + .sources = clk_epllref_sources, + .nr_sources = ARRAY_SIZE(clk_epllref_sources), + }, + .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 7 }, }; static unsigned long s3c2443_getrate_mdivclk(struct clk *clk) @@ -205,34 +134,29 @@ static struct clk clk_mdivclk = { .name = "mdivclk", .parent = &clk_mpllref, .id = -1, - .get_rate = s3c2443_getrate_mdivclk, + .ops = &(struct clk_ops) { + .get_rate = s3c2443_getrate_mdivclk, + }, }; -static int s3c2443_setparent_msysclk(struct clk *clk, struct clk *parent) -{ - unsigned long clksrc = __raw_readl(S3C2443_CLKSRC); - - clksrc &= ~(S3C2443_CLKSRC_MSYSCLK_MPLL | - S3C2443_CLKSRC_EXTCLK_DIV); - - if (parent == &clk_mpll) - clksrc |= S3C2443_CLKSRC_MSYSCLK_MPLL; - else if (parent == &clk_mdivclk) - clksrc |= S3C2443_CLKSRC_EXTCLK_DIV; - else if (parent != &clk_mpllref) - return -EINVAL; - - __raw_writel(clksrc, S3C2443_CLKSRC); - clk->parent = parent; - - return 0; -} +static struct clk *clk_msysclk_sources[] = { + [0] = &clk_mpllref, + [1] = &clk_mpll, + [2] = &clk_mdivclk, + [3] = &clk_mpllref, +}; -static struct clk clk_msysclk = { - .name = "msysclk", - .parent = &clk_xtal, - .id = -1, - .set_parent = s3c2443_setparent_msysclk, +static struct clksrc_clk clk_msysclk = { + .clk = { + .name = "msysclk", + .parent = &clk_xtal, + .id = -1, + }, + .sources = &(struct clksrc_sources) { + .sources = clk_msysclk_sources, + .nr_sources = ARRAY_SIZE(clk_msysclk_sources), + }, + .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 3 }, }; /* armdiv @@ -241,152 +165,159 @@ static struct clk clk_msysclk = { * divider values applied to it to then be fed into armclk. */ -static struct clk clk_armdiv = { - .name = "armdiv", - .id = -1, - .parent = &clk_msysclk, -}; +/* armdiv divisor table */ -/* armclk - * - * this is the clock fed into the ARM core itself, either from - * armdiv or from hclk. - */ +static unsigned int armdiv[16] = { + [S3C2443_CLKDIV0_ARMDIV_1 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 1, + [S3C2443_CLKDIV0_ARMDIV_2 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 2, + [S3C2443_CLKDIV0_ARMDIV_3 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 3, + [S3C2443_CLKDIV0_ARMDIV_4 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 4, + [S3C2443_CLKDIV0_ARMDIV_6 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 6, + [S3C2443_CLKDIV0_ARMDIV_8 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 8, + [S3C2443_CLKDIV0_ARMDIV_12 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 12, + [S3C2443_CLKDIV0_ARMDIV_16 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 16, +}; -static int s3c2443_setparent_armclk(struct clk *clk, struct clk *parent) +static inline unsigned int s3c2443_fclk_div(unsigned long clkcon0) { - unsigned long clkdiv0; - - clkdiv0 = __raw_readl(S3C2443_CLKDIV0); - - if (parent == &clk_armdiv) - clkdiv0 &= ~S3C2443_CLKDIV0_DVS; - else if (parent == &clk_h) - clkdiv0 |= S3C2443_CLKDIV0_DVS; - else - return -EINVAL; + clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK; - __raw_writel(clkdiv0, S3C2443_CLKDIV0); - return 0; + return armdiv[clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]; } -static struct clk clk_arm = { - .name = "armclk", - .id = -1, - .set_parent = s3c2443_setparent_armclk, -}; +static unsigned long s3c2443_armclk_roundrate(struct clk *clk, + unsigned long rate) +{ + unsigned long parent = clk_get_rate(clk->parent); + unsigned long calc; + unsigned best = 256; /* bigger than any value */ + unsigned div; + int ptr; -/* esysclk - * - * this is sourced from either the EPLL or the EPLLref clock -*/ + for (ptr = 0; ptr < ARRAY_SIZE(armdiv); ptr++) { + div = armdiv[ptr]; + calc = parent / div; + if (calc <= rate && div < best) + best = div; + } -static int s3c2443_setparent_esysclk(struct clk *clk, struct clk *parent) + return parent / best; +} + +static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate) { - unsigned long clksrc = __raw_readl(S3C2443_CLKSRC); + unsigned long parent = clk_get_rate(clk->parent); + unsigned long calc; + unsigned div; + unsigned best = 256; /* bigger than any value */ + int ptr; + int val = -1; + + for (ptr = 0; ptr < ARRAY_SIZE(armdiv); ptr++) { + div = armdiv[ptr]; + calc = parent / div; + if (calc <= rate && div < best) { + best = div; + val = ptr; + } + } - if (parent == &clk_epll) - clksrc |= S3C2443_CLKSRC_ESYSCLK_EPLL; - else if (parent == &clk_epllref) - clksrc &= ~S3C2443_CLKSRC_ESYSCLK_EPLL; - else - return -EINVAL; + if (val >= 0) { + unsigned long clkcon0; - __raw_writel(clksrc, S3C2443_CLKSRC); - clk->parent = parent; + clkcon0 = __raw_readl(S3C2443_CLKDIV0); + clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK; + clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT; + __raw_writel(clkcon0, S3C2443_CLKDIV0); + } - return 0; + return (val == -1) ? -EINVAL : 0; } -static struct clk clk_esysclk = { - .name = "esysclk", - .parent = &clk_epll, +static struct clk clk_armdiv = { + .name = "armdiv", .id = -1, - .set_parent = s3c2443_setparent_esysclk, + .parent = &clk_msysclk.clk, + .ops = &(struct clk_ops) { + .round_rate = s3c2443_armclk_roundrate, + .set_rate = s3c2443_armclk_setrate, + }, }; -/* uartclk +/* armclk * - * UART baud-rate clock sourced from esysclk via a divisor -*/ - -static unsigned long s3c2443_getrate_uart(struct clk *clk) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long div = __raw_readl(S3C2443_CLKDIV1); - - div &= S3C2443_CLKDIV1_UARTDIV_MASK; - div >>= S3C2443_CLKDIV1_UARTDIV_SHIFT; + * this is the clock fed into the ARM core itself, from armdiv or from hclk. + */ - return parent_rate / (div + 1); -} +static struct clk *clk_arm_sources[] = { + [0] = &clk_armdiv, + [1] = &clk_h, +}; +static struct clksrc_clk clk_arm = { + .clk = { + .name = "armclk", + .id = -1, + }, + .sources = &(struct clksrc_sources) { + .sources = clk_arm_sources, + .nr_sources = ARRAY_SIZE(clk_arm_sources), + }, + .reg_src = { .reg = S3C2443_CLKDIV0, .size = 1, .shift = 13 }, +}; -static int s3c2443_setrate_uart(struct clk *clk, unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1); +/* esysclk + * + * this is sourced from either the EPLL or the EPLLref clock +*/ - rate = s3c2443_roundrate_clksrc16(clk, rate); - rate = parent_rate / rate; +static struct clk *clk_sysclk_sources[] = { + [0] = &clk_epllref.clk, + [1] = &clk_epll, +}; - clkdivn &= ~S3C2443_CLKDIV1_UARTDIV_MASK; - clkdivn |= (rate - 1) << S3C2443_CLKDIV1_UARTDIV_SHIFT; +static struct clksrc_clk clk_esysclk = { + .clk = { + .name = "esysclk", + .parent = &clk_epll, + .id = -1, + }, + .sources = &(struct clksrc_sources) { + .sources = clk_sysclk_sources, + .nr_sources = ARRAY_SIZE(clk_sysclk_sources), + }, + .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 6 }, +}; - __raw_writel(clkdivn, S3C2443_CLKDIV1); - return 0; -} +/* uartclk + * + * UART baud-rate clock sourced from esysclk via a divisor +*/ -static struct clk clk_uart = { - .name = "uartclk", - .id = -1, - .parent = &clk_esysclk, - .get_rate = s3c2443_getrate_uart, - .set_rate = s3c2443_setrate_uart, - .round_rate = s3c2443_roundrate_clksrc16, +static struct clksrc_clk clk_uart = { + .clk = { + .name = "uartclk", + .id = -1, + .parent = &clk_esysclk.clk, + }, + .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 }, }; + /* hsspi * * high-speed spi clock, sourced from esysclk */ -static unsigned long s3c2443_getrate_hsspi(struct clk *clk) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long div = __raw_readl(S3C2443_CLKDIV1); - - div &= S3C2443_CLKDIV1_HSSPIDIV_MASK; - div >>= S3C2443_CLKDIV1_HSSPIDIV_SHIFT; - - return parent_rate / (div + 1); -} - - -static int s3c2443_setrate_hsspi(struct clk *clk, unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1); - - rate = s3c2443_roundrate_clksrc4(clk, rate); - rate = parent_rate / rate; - - clkdivn &= ~S3C2443_CLKDIV1_HSSPIDIV_MASK; - clkdivn |= (rate - 1) << S3C2443_CLKDIV1_HSSPIDIV_SHIFT; - - __raw_writel(clkdivn, S3C2443_CLKDIV1); - return 0; -} - -static struct clk clk_hsspi = { - .name = "hsspi", - .id = -1, - .parent = &clk_esysclk, - .ctrlbit = S3C2443_SCLKCON_HSSPICLK, - .enable = s3c2443_clkcon_enable_s, - .get_rate = s3c2443_getrate_hsspi, - .set_rate = s3c2443_setrate_hsspi, - .round_rate = s3c2443_roundrate_clksrc4, +static struct clksrc_clk clk_hsspi = { + .clk = { + .name = "hsspi", + .id = -1, + .parent = &clk_esysclk.clk, + .ctrlbit = S3C2443_SCLKCON_HSSPICLK, + .enable = s3c2443_clkcon_enable_s, + }, + .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 }, }; /* usbhost @@ -394,41 +325,15 @@ static struct clk clk_hsspi = { * usb host bus-clock, usually 48MHz to provide USB bus clock timing */ -static unsigned long s3c2443_getrate_usbhost(struct clk *clk) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long div = __raw_readl(S3C2443_CLKDIV1); - - div &= S3C2443_CLKDIV1_USBHOSTDIV_MASK; - div >>= S3C2443_CLKDIV1_USBHOSTDIV_SHIFT; - - return parent_rate / (div + 1); -} - -static int s3c2443_setrate_usbhost(struct clk *clk, unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1); - - rate = s3c2443_roundrate_clksrc4(clk, rate); - rate = parent_rate / rate; - - clkdivn &= ~S3C2443_CLKDIV1_USBHOSTDIV_MASK; - clkdivn |= (rate - 1) << S3C2443_CLKDIV1_USBHOSTDIV_SHIFT; - - __raw_writel(clkdivn, S3C2443_CLKDIV1); - return 0; -} - -static struct clk clk_usb_bus_host = { - .name = "usb-bus-host-parent", - .id = -1, - .parent = &clk_esysclk, - .ctrlbit = S3C2443_SCLKCON_USBHOST, - .enable = s3c2443_clkcon_enable_s, - .get_rate = s3c2443_getrate_usbhost, - .set_rate = s3c2443_setrate_usbhost, - .round_rate = s3c2443_roundrate_clksrc4, +static struct clksrc_clk clk_usb_bus_host = { + .clk = { + .name = "usb-bus-host-parent", + .id = -1, + .parent = &clk_esysclk.clk, + .ctrlbit = S3C2443_SCLKCON_USBHOST, + .enable = s3c2443_clkcon_enable_s, + }, + .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 }, }; /* clk_hsmcc_div @@ -438,39 +343,13 @@ static struct clk clk_usb_bus_host = { * be fed to the hsmmc block */ -static unsigned long s3c2443_getrate_hsmmc_div(struct clk *clk) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long div = __raw_readl(S3C2443_CLKDIV1); - - div &= S3C2443_CLKDIV1_HSMMCDIV_MASK; - div >>= S3C2443_CLKDIV1_HSMMCDIV_SHIFT; - - return parent_rate / (div + 1); -} - -static int s3c2443_setrate_hsmmc_div(struct clk *clk, unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1); - - rate = s3c2443_roundrate_clksrc4(clk, rate); - rate = parent_rate / rate; - - clkdivn &= ~S3C2443_CLKDIV1_HSMMCDIV_MASK; - clkdivn |= (rate - 1) << S3C2443_CLKDIV1_HSMMCDIV_SHIFT; - - __raw_writel(clkdivn, S3C2443_CLKDIV1); - return 0; -} - -static struct clk clk_hsmmc_div = { - .name = "hsmmc-div", - .id = -1, - .parent = &clk_esysclk, - .get_rate = s3c2443_getrate_hsmmc_div, - .set_rate = s3c2443_setrate_hsmmc_div, - .round_rate = s3c2443_roundrate_clksrc4, +static struct clksrc_clk clk_hsmmc_div = { + .clk = { + .name = "hsmmc-div", + .id = -1, + .parent = &clk_esysclk.clk, + }, + .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 }, }; static int s3c2443_setparent_hsmmc(struct clk *clk, struct clk *parent) @@ -503,82 +382,55 @@ static int s3c2443_enable_hsmmc(struct clk *clk, int enable) static struct clk clk_hsmmc = { .name = "hsmmc-if", .id = -1, - .parent = &clk_hsmmc_div, + .parent = &clk_hsmmc_div.clk, .enable = s3c2443_enable_hsmmc, - .set_parent = s3c2443_setparent_hsmmc, + .ops = &(struct clk_ops) { + .set_parent = s3c2443_setparent_hsmmc, + }, }; /* i2s_eplldiv * - * this clock is the output from the i2s divisor of esysclk + * This clock is the output from the I2S divisor of ESYSCLK, and is seperate + * from the mux that comes after it (cannot merge into one single clock) */ -static unsigned long s3c2443_getrate_i2s_eplldiv(struct clk *clk) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long div = __raw_readl(S3C2443_CLKDIV1); - - div &= S3C2443_CLKDIV1_I2SDIV_MASK; - div >>= S3C2443_CLKDIV1_I2SDIV_SHIFT; - - return parent_rate / (div + 1); -} - -static int s3c2443_setrate_i2s_eplldiv(struct clk *clk, unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1); - - rate = s3c2443_roundrate_clksrc16(clk, rate); - rate = parent_rate / rate; - - clkdivn &= ~S3C2443_CLKDIV1_I2SDIV_MASK; - clkdivn |= (rate - 1) << S3C2443_CLKDIV1_I2SDIV_SHIFT; - - __raw_writel(clkdivn, S3C2443_CLKDIV1); - return 0; -} - -static struct clk clk_i2s_eplldiv = { - .name = "i2s-eplldiv", - .id = -1, - .parent = &clk_esysclk, - .get_rate = s3c2443_getrate_i2s_eplldiv, - .set_rate = s3c2443_setrate_i2s_eplldiv, - .round_rate = s3c2443_roundrate_clksrc16, +static struct clksrc_clk clk_i2s_eplldiv = { + .clk = { + .name = "i2s-eplldiv", + .id = -1, + .parent = &clk_esysclk.clk, + }, + .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 12, }, }; /* i2s-ref * * i2s bus reference clock, selectable from external, esysclk or epllref + * + * Note, this used to be two clocks, but was compressed into one. */ -static int s3c2443_setparent_i2s(struct clk *clk, struct clk *parent) -{ - unsigned long clksrc = __raw_readl(S3C2443_CLKSRC); - - clksrc &= ~S3C2443_CLKSRC_I2S_MASK; - - if (parent == &clk_epllref) - clksrc |= S3C2443_CLKSRC_I2S_EPLLREF; - else if (parent == &clk_i2s_ext) - clksrc |= S3C2443_CLKSRC_I2S_EXT; - else if (parent != &clk_i2s_eplldiv) - return -EINVAL; - - clk->parent = parent; - __raw_writel(clksrc, S3C2443_CLKSRC); - - return 0; -} +struct clk *clk_i2s_srclist[] = { + [0] = &clk_i2s_eplldiv.clk, + [1] = &clk_i2s_ext, + [2] = &clk_epllref.clk, + [3] = &clk_epllref.clk, +}; -static struct clk clk_i2s = { - .name = "i2s-if", - .id = -1, - .parent = &clk_i2s_eplldiv, - .ctrlbit = S3C2443_SCLKCON_I2SCLK, - .enable = s3c2443_clkcon_enable_s, - .set_parent = s3c2443_setparent_i2s, +static struct clksrc_clk clk_i2s = { + .clk = { + .name = "i2s-if", + .id = -1, + .ctrlbit = S3C2443_SCLKCON_I2SCLK, + .enable = s3c2443_clkcon_enable_s, + + }, + .sources = &(struct clksrc_sources) { + .sources = clk_i2s_srclist, + .nr_sources = ARRAY_SIZE(clk_i2s_srclist), + }, + .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 }, }; /* cam-if @@ -586,41 +438,15 @@ static struct clk clk_i2s = { * camera interface bus-clock, divided down from esysclk */ -static unsigned long s3c2443_getrate_cam(struct clk *clk) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long div = __raw_readl(S3C2443_CLKDIV1); - - div &= S3C2443_CLKDIV1_CAMDIV_MASK; - div >>= S3C2443_CLKDIV1_CAMDIV_SHIFT; - - return parent_rate / (div + 1); -} - -static int s3c2443_setrate_cam(struct clk *clk, unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long clkdiv1 = __raw_readl(S3C2443_CLKDIV1); - - rate = s3c2443_roundrate_clksrc16(clk, rate); - rate = parent_rate / rate; - - clkdiv1 &= ~S3C2443_CLKDIV1_CAMDIV_MASK; - clkdiv1 |= (rate - 1) << S3C2443_CLKDIV1_CAMDIV_SHIFT; - - __raw_writel(clkdiv1, S3C2443_CLKDIV1); - return 0; -} - -static struct clk clk_cam = { - .name = "camif-upll", /* same as 2440 name */ - .id = -1, - .parent = &clk_esysclk, - .ctrlbit = S3C2443_SCLKCON_CAMCLK, - .enable = s3c2443_clkcon_enable_s, - .get_rate = s3c2443_getrate_cam, - .set_rate = s3c2443_setrate_cam, - .round_rate = s3c2443_roundrate_clksrc16, +static struct clksrc_clk clk_cam = { + .clk = { + .name = "camif-upll", /* same as 2440 name */ + .id = -1, + .parent = &clk_esysclk.clk, + .ctrlbit = S3C2443_SCLKCON_CAMCLK, + .enable = s3c2443_clkcon_enable_s, + }, + .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 26 }, }; /* display-if @@ -628,41 +454,15 @@ static struct clk clk_cam = { * display interface clock, divided from esysclk */ -static unsigned long s3c2443_getrate_display(struct clk *clk) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long div = __raw_readl(S3C2443_CLKDIV1); - - div &= S3C2443_CLKDIV1_DISPDIV_MASK; - div >>= S3C2443_CLKDIV1_DISPDIV_SHIFT; - - return parent_rate / (div + 1); -} - -static int s3c2443_setrate_display(struct clk *clk, unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1); - - rate = s3c2443_roundrate_clksrc256(clk, rate); - rate = parent_rate / rate; - - clkdivn &= ~S3C2443_CLKDIV1_UARTDIV_MASK; - clkdivn |= (rate - 1) << S3C2443_CLKDIV1_UARTDIV_SHIFT; - - __raw_writel(clkdivn, S3C2443_CLKDIV1); - return 0; -} - -static struct clk clk_display = { - .name = "display-if", - .id = -1, - .parent = &clk_esysclk, - .ctrlbit = S3C2443_SCLKCON_DISPCLK, - .enable = s3c2443_clkcon_enable_s, - .get_rate = s3c2443_getrate_display, - .set_rate = s3c2443_setrate_display, - .round_rate = s3c2443_roundrate_clksrc256, +static struct clksrc_clk clk_display = { + .clk = { + .name = "display-if", + .id = -1, + .parent = &clk_esysclk.clk, + .ctrlbit = S3C2443_SCLKCON_DISPCLK, + .enable = s3c2443_clkcon_enable_s, + }, + .reg_div = { .reg = S3C2443_CLKDIV1, .size = 8, .shift = 16 }, }; /* prediv @@ -684,8 +484,10 @@ static unsigned long s3c2443_prediv_getrate(struct clk *clk) static struct clk clk_prediv = { .name = "prediv", .id = -1, - .parent = &clk_msysclk, - .get_rate = s3c2443_prediv_getrate, + .parent = &clk_msysclk.clk, + .ops = &(struct clk_ops) { + .get_rate = s3c2443_prediv_getrate, + }, }; /* standard clock definitions */ @@ -857,7 +659,7 @@ static struct clk init_clocks[] = { }, { .name = "usb-bus-host", .id = -1, - .parent = &clk_usb_bus_host, + .parent = &clk_usb_bus_host.clk, }, { .name = "ac97", .id = -1, @@ -868,103 +670,26 @@ static struct clk init_clocks[] = { /* clocks to add where we need to check their parentage */ -/* s3c2443_clk_initparents - * - * Initialise the parents for the clocks that we get at start-time -*/ - -static int __init clk_init_set_parent(struct clk *clk, struct clk *parent) -{ - printk(KERN_DEBUG "clock %s: parent %s\n", clk->name, parent->name); - return clk_set_parent(clk, parent); -} - -static void __init s3c2443_clk_initparents(void) -{ - unsigned long clksrc = __raw_readl(S3C2443_CLKSRC); - struct clk *parent; - - switch (clksrc & S3C2443_CLKSRC_EPLLREF_MASK) { - case S3C2443_CLKSRC_EPLLREF_EXTCLK: - parent = &clk_ext; - break; - - case S3C2443_CLKSRC_EPLLREF_XTAL: - default: - parent = &clk_xtal; - break; - - case S3C2443_CLKSRC_EPLLREF_MPLLREF: - case S3C2443_CLKSRC_EPLLREF_MPLLREF2: - parent = &clk_mpllref; - break; - } - - clk_init_set_parent(&clk_epllref, parent); - - switch (clksrc & S3C2443_CLKSRC_I2S_MASK) { - case S3C2443_CLKSRC_I2S_EXT: - parent = &clk_i2s_ext; - break; - - case S3C2443_CLKSRC_I2S_EPLLDIV: - default: - parent = &clk_i2s_eplldiv; - break; - - case S3C2443_CLKSRC_I2S_EPLLREF: - case S3C2443_CLKSRC_I2S_EPLLREF3: - parent = &clk_epllref; - } - - clk_init_set_parent(&clk_i2s, &clk_epllref); - - /* esysclk source */ - - parent = (clksrc & S3C2443_CLKSRC_ESYSCLK_EPLL) ? - &clk_epll : &clk_epllref; - - clk_init_set_parent(&clk_esysclk, parent); - - /* msysclk source */ - - if (clksrc & S3C2443_CLKSRC_MSYSCLK_MPLL) { - parent = &clk_mpll; - } else { - parent = (clksrc & S3C2443_CLKSRC_EXTCLK_DIV) ? - &clk_mdivclk : &clk_mpllref; - } - - clk_init_set_parent(&clk_msysclk, parent); - - /* arm */ - - if (__raw_readl(S3C2443_CLKDIV0) & S3C2443_CLKDIV0_DVS) - parent = &clk_h; - else - parent = &clk_armdiv; - - clk_init_set_parent(&clk_arm, parent); -} - -/* armdiv divisor table */ - -static unsigned int armdiv[16] = { - [S3C2443_CLKDIV0_ARMDIV_1 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 1, - [S3C2443_CLKDIV0_ARMDIV_2 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 2, - [S3C2443_CLKDIV0_ARMDIV_3 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 3, - [S3C2443_CLKDIV0_ARMDIV_4 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 4, - [S3C2443_CLKDIV0_ARMDIV_6 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 6, - [S3C2443_CLKDIV0_ARMDIV_8 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 8, - [S3C2443_CLKDIV0_ARMDIV_12 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 12, - [S3C2443_CLKDIV0_ARMDIV_16 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 16, +static struct clksrc_clk __initdata *init_list[] = { + &clk_epllref, /* should be first */ + &clk_esysclk, + &clk_msysclk, + &clk_arm, + &clk_i2s_eplldiv, + &clk_i2s, + &clk_cam, + &clk_uart, + &clk_display, + &clk_hsmmc_div, + &clk_usb_bus_host, }; -static inline unsigned int s3c2443_fclk_div(unsigned long clkcon0) +static void __init s3c2443_clk_initparents(void) { - clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK; + int ptr; - return armdiv[clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]; + for (ptr = 0; ptr < ARRAY_SIZE(init_list); ptr++) + s3c_set_clksrc(init_list[ptr], true); } static inline unsigned long s3c2443_get_hdiv(unsigned long clkcon0) @@ -976,15 +701,12 @@ static inline unsigned long s3c2443_get_hdiv(unsigned long clkcon0) /* clocks to add straight away */ -static struct clk *clks[] __initdata = { - &clk_ext, - &clk_epll, +static struct clksrc_clk *clksrcs[] __initdata = { &clk_usb_bus_host, - &clk_usb_bus, - &clk_esysclk, &clk_epllref, - &clk_mpllref, + &clk_esysclk, &clk_msysclk, + &clk_arm, &clk_uart, &clk_display, &clk_cam, @@ -992,9 +714,15 @@ static struct clk *clks[] __initdata = { &clk_i2s, &clk_hsspi, &clk_hsmmc_div, +}; + +static struct clk *clks[] __initdata = { + &clk_ext, + &clk_epll, + &clk_usb_bus, + &clk_mpllref, &clk_hsmmc, &clk_armdiv, - &clk_arm, &clk_prediv, }; @@ -1014,7 +742,7 @@ void __init_or_cpufreq s3c2443_setup_clocks(void) clk_put(xtal_clk); pll = s3c2443_get_mpll(mpllcon, xtal); - clk_msysclk.rate = pll; + clk_msysclk.clk.rate = pll; fclk = pll / s3c2443_fclk_div(clkdiv0); hclk = s3c2443_prediv_getrate(&clk_prediv); @@ -1056,15 +784,18 @@ void __init s3c2443_init_clocks(int xtal) } } + for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) + s3c_register_clksrc(clksrcs[ptr], 1); + clk_epll.rate = s3c2443_get_epll(epllcon, xtal); - clk_epll.parent = &clk_epllref; - clk_usb_bus.parent = &clk_usb_bus_host; + clk_epll.parent = &clk_epllref.clk; + clk_usb_bus.parent = &clk_usb_bus_host.clk; /* ensure usb bus clock is within correct rate of 48MHz */ - if (clk_get_rate(&clk_usb_bus_host) != (48 * 1000 * 1000)) { + if (clk_get_rate(&clk_usb_bus_host.clk) != (48 * 1000 * 1000)) { printk(KERN_INFO "Warning: USB host bus not at 48MHz\n"); - clk_set_rate(&clk_usb_bus_host, 48*1000*1000); + clk_set_rate(&clk_usb_bus_host.clk, 48*1000*1000); } printk("S3C2443: epll %s %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n", @@ -1074,14 +805,7 @@ void __init s3c2443_init_clocks(int xtal) /* register clocks from clock array */ - clkp = init_clocks; - for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) { - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - } + s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); /* We must be careful disabling the clocks we are not intending to * be using at boot time, as subsystems such as the LCD which do diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c index 397f3b5c0b4..3f658685ec1 100644 --- a/arch/arm/mach-s3c2443/dma.c +++ b/arch/arm/mach-s3c2443/dma.c @@ -20,7 +20,7 @@ #include <mach/dma.h> -#include <plat/dma-plat.h> +#include <plat/dma-s3c24xx.h> #include <plat/cpu.h> #include <plat/regs-serial.h> diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c index 039a4624310..e2e362bda9b 100644 --- a/arch/arm/mach-s3c2443/mach-smdk2443.c +++ b/arch/arm/mach-s3c2443/mach-smdk2443.c @@ -40,7 +40,7 @@ #include <plat/iic.h> #include <plat/s3c2410.h> -#include <plat/s3c2440.h> +#include <plat/s3c2443.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> @@ -106,6 +106,9 @@ static struct platform_device *smdk2443_devices[] __initdata = { &s3c_device_wdt, &s3c_device_i2c0, &s3c_device_hsmmc0, +#ifdef CONFIG_SND_SOC_SMDK2443_WM9710 + &s3c_device_ac97, +#endif }; static void __init smdk2443_map_io(void) @@ -118,6 +121,11 @@ static void __init smdk2443_map_io(void) static void __init smdk2443_machine_init(void) { s3c_i2c0_set_platdata(NULL); + +#ifdef CONFIG_SND_SOC_SMDK2443_WM9710 + s3c24xx_ac97_setup_gpio(S3C24XX_AC97_GPE0); +#endif + platform_add_devices(smdk2443_devices, ARRAY_SIZE(smdk2443_devices)); smdk_machine_init(); } diff --git a/arch/arm/plat-s3c/include/mach/io.h b/arch/arm/mach-s3c24a0/include/mach/io.h index f6a53631b66..4326c30fabc 100644 --- a/arch/arm/plat-s3c/include/mach/io.h +++ b/arch/arm/mach-s3c24a0/include/mach/io.h @@ -1,9 +1,9 @@ -/* arch/arm/plat-s3c/include/mach/io.h +/* arch/arm/mach-s3c24a0/include/mach/io.h * * Copyright 2008 Simtec Electronics * Ben Dooks <ben-linux@fluff.org> * - * Default IO routines for plat-s3c based systems, such as S3C24A0 + * Default IO routines for S3C24A0 */ #ifndef __ASM_ARM_ARCH_IO_H diff --git a/arch/arm/mach-s3c6400/Kconfig b/arch/arm/mach-s3c6400/Kconfig deleted file mode 100644 index a250bf68709..00000000000 --- a/arch/arm/mach-s3c6400/Kconfig +++ /dev/null @@ -1,30 +0,0 @@ -# Copyright 2008 Openmoko, Inc. -# Simtec Electronics, Ben Dooks <ben@simtec.co.uk> -# -# Licensed under GPLv2 - -# Configuration options for the S3C6410 CPU - -config CPU_S3C6400 - bool - select CPU_S3C6400_INIT - select CPU_S3C6400_CLOCK - help - Enable S3C6400 CPU support - -config S3C6400_SETUP_SDHCI - bool - help - Internal configuration for default SDHCI - setup for S3C6400. - -# S36400 Macchine support - -config MACH_SMDK6400 - bool "SMDK6400" - select CPU_S3C6400 - select S3C_DEV_HSMMC - select S3C_DEV_NAND - select S3C6400_SETUP_SDHCI - help - Machine support for the Samsung SMDK6400 diff --git a/arch/arm/mach-s3c6400/Makefile b/arch/arm/mach-s3c6400/Makefile deleted file mode 100644 index df1ce4aa03e..00000000000 --- a/arch/arm/mach-s3c6400/Makefile +++ /dev/null @@ -1,23 +0,0 @@ -# arch/arm/mach-s3c6400/Makefile -# -# Copyright 2008 Openmoko, Inc. -# Copyright 2008 Simtec Electronics -# -# Licensed under GPLv2 - -obj-y := -obj-m := -obj-n := -obj- := - -# Core support for S3C6400 system - -obj-$(CONFIG_CPU_S3C6400) += s3c6400.o - -# setup support - -obj-$(CONFIG_S3C6400_SETUP_SDHCI) += setup-sdhci.o - -# Machine support - -obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o diff --git a/arch/arm/mach-s3c6400/include/mach/dma.h b/arch/arm/mach-s3c6400/include/mach/dma.h deleted file mode 100644 index 6723860748b..00000000000 --- a/arch/arm/mach-s3c6400/include/mach/dma.h +++ /dev/null @@ -1,70 +0,0 @@ -/* linux/arch/arm/mach-s3c6400/include/mach/dma.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C6400 - DMA support - */ - -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H __FILE__ - -#define S3C_DMA_CHANNELS (16) - -/* see mach-s3c2410/dma.h for notes on dma channel numbers */ - -/* Note, for the S3C64XX architecture we keep the DMACH_ - * defines in the order they are allocated to [S]DMA0/[S]DMA1 - * so that is easy to do DHACH_ -> DMA controller conversion - */ -enum dma_ch { - /* DMA0/SDMA0 */ - DMACH_UART0 = 0, - DMACH_UART0_SRC2, - DMACH_UART1, - DMACH_UART1_SRC2, - DMACH_UART2, - DMACH_UART2_SRC2, - DMACH_UART3, - DMACH_UART3_SRC2, - DMACH_PCM0_TX, - DMACH_PCM0_RX, - DMACH_I2S0_OUT, - DMACH_I2S0_IN, - DMACH_SPI0_TX, - DMACH_SPI0_RX, - DMACH_HSI_I2SV40_TX, - DMACH_HSI_I2SV40_RX, - - /* DMA1/SDMA1 */ - DMACH_PCM1_TX = 16, - DMACH_PCM1_RX, - DMACH_I2S1_OUT, - DMACH_I2S1_IN, - DMACH_SPI1_TX, - DMACH_SPI1_RX, - DMACH_AC97_PCMOUT, - DMACH_AC97_PCMIN, - DMACH_AC97_MICIN, - DMACH_PWM, - DMACH_IRDA, - DMACH_EXTERNAL, - DMACH_RES1, - DMACH_RES2, - DMACH_SECURITY_RX, /* SDMA1 only */ - DMACH_SECURITY_TX, /* SDMA1 only */ - DMACH_MAX /* the end */ -}; - -static __inline__ bool s3c_dma_has_circular(void) -{ - return true; -} - -#define S3C2410_DMAF_CIRCULAR (1 << 0) - -#include <plat/dma.h> - -#endif /* __ASM_ARCH_IRQ_H */ diff --git a/arch/arm/mach-s3c6400/include/mach/gpio-core.h b/arch/arm/mach-s3c6400/include/mach/gpio-core.h deleted file mode 100644 index d89aae68b0a..00000000000 --- a/arch/arm/mach-s3c6400/include/mach/gpio-core.h +++ /dev/null @@ -1,21 +0,0 @@ -/* arch/arm/mach-s3c6400/include/mach/gpio-core.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C64XX - GPIO core support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_GPIO_CORE_H -#define __ASM_ARCH_GPIO_CORE_H __FILE__ - -/* currently we just include the platform support */ -#include <plat/gpio-core.h> - -#endif /* __ASM_ARCH_GPIO_CORE_H */ diff --git a/arch/arm/mach-s3c6400/include/mach/irqs.h b/arch/arm/mach-s3c6400/include/mach/irqs.h deleted file mode 100644 index 4c97f9a4370..00000000000 --- a/arch/arm/mach-s3c6400/include/mach/irqs.h +++ /dev/null @@ -1,16 +0,0 @@ -/* linux/arch/arm/mach-s3c6400/include/mach/irqs.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C6400 - IRQ definitions - */ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H __FILE__ - -#include <plat/irqs.h> - -#endif /* __ASM_ARCH_IRQ_H */ diff --git a/arch/arm/mach-s3c6400/include/mach/regs-clock.h b/arch/arm/mach-s3c6400/include/mach/regs-clock.h deleted file mode 100644 index a6c7f4eb3a1..00000000000 --- a/arch/arm/mach-s3c6400/include/mach/regs-clock.h +++ /dev/null @@ -1,16 +0,0 @@ -/* linux/arch/arm/mach-s3c6400/include/mach/regs-clock.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C64XX - clock register compatibility with s3c24xx - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <plat/regs-clock.h> - diff --git a/arch/arm/mach-s3c6410/Makefile b/arch/arm/mach-s3c6410/Makefile deleted file mode 100644 index 3e48c3dbf97..00000000000 --- a/arch/arm/mach-s3c6410/Makefile +++ /dev/null @@ -1,26 +0,0 @@ -# arch/arm/plat-s3c6410/Makefile -# -# Copyright 2008 Openmoko, Inc. -# Copyright 2008 Simtec Electronics -# -# Licensed under GPLv2 - -obj-y := -obj-m := -obj-n := -obj- := - -# Core support for S3C6410 system - -obj-$(CONFIG_CPU_S3C6410) += cpu.o - -# Helper and device support - -obj-$(CONFIG_S3C6410_SETUP_SDHCI) += setup-sdhci.o - -# machine support - -obj-$(CONFIG_MACH_ANW6410) += mach-anw6410.o -obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o -obj-$(CONFIG_MACH_NCP) += mach-ncp.o -obj-$(CONFIG_MACH_HMT) += mach-hmt.o diff --git a/arch/arm/mach-s3c6410/setup-sdhci.c b/arch/arm/mach-s3c6410/setup-sdhci.c deleted file mode 100644 index 816d2d9f9ef..00000000000 --- a/arch/arm/mach-s3c6410/setup-sdhci.c +++ /dev/null @@ -1,68 +0,0 @@ -/* linux/arch/arm/mach-s3c6410/setup-sdhci.c - * - * Copyright 2008 Simtec Electronics - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C6410 - Helper functions for settign up SDHCI device(s) (HSMMC) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/io.h> - -#include <linux/mmc/card.h> -#include <linux/mmc/host.h> - -#include <plat/regs-sdhci.h> -#include <plat/sdhci.h> - -/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */ - -char *s3c6410_hsmmc_clksrcs[4] = { - [0] = "hsmmc", - [1] = "hsmmc", - [2] = "mmc_bus", - /* [3] = "48m", - note not successfully used yet */ -}; - - -void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev, - void __iomem *r, - struct mmc_ios *ios, - struct mmc_card *card) -{ - u32 ctrl2, ctrl3; - - /* don't need to alter anything acording to card-type */ - - writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4); - - ctrl2 = readl(r + S3C_SDHCI_CONTROL2); - ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK; - ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR | - S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK | - S3C_SDHCI_CTRL2_ENFBCLKRX | - S3C_SDHCI_CTRL2_DFCNT_NONE | - S3C_SDHCI_CTRL2_ENCLKOUTHOLD); - - if (ios->clock < 25 * 1000000) - ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 | - S3C_SDHCI_CTRL3_FCSEL2 | - S3C_SDHCI_CTRL3_FCSEL1 | - S3C_SDHCI_CTRL3_FCSEL0); - else - ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0); - - printk(KERN_INFO "%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3); - writel(ctrl2, r + S3C_SDHCI_CONTROL2); - writel(ctrl3, r + S3C_SDHCI_CONTROL3); -} - diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index 162f4561f80..959df3840de 100644 --- a/arch/arm/mach-s3c6410/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -1,22 +1,78 @@ # Copyright 2008 Openmoko, Inc. -# Copyright 2008 Simtec Electronics +# Simtec Electronics, Ben Dooks <ben@simtec.co.uk> # # Licensed under GPLv2 +# temporary until we can eliminate all drivers using it. +config PLAT_S3C64XX + bool + depends on ARCH_S3C64XX + default y + help + Base platform code for any Samsung S3C64XX device + + # Configuration options for the S3C6410 CPU +config CPU_S3C6400 + bool + help + Enable S3C6400 CPU support + config CPU_S3C6410 bool - select CPU_S3C6400_INIT - select CPU_S3C6400_CLOCK help Enable S3C6410 CPU support -config S3C6410_SETUP_SDHCI - bool +config S3C64XX_DMA + bool "S3C64XX DMA" + select S3C_DMA + +config S3C64XX_SETUP_SDHCI select S3C64XX_SETUP_SDHCI_GPIO + bool help - Internal helper functions for S3C6410 based SDHCI systems + Internal configuration for default SDHCI setup for S3C6400 and + S3C6410 SoCs. + +# platform specific device setup + +config S3C64XX_SETUP_I2C0 + bool + default y + help + Common setup code for i2c bus 0. + + Note, currently since i2c0 is always compiled, this setup helper + is always compiled with it. + +config S3C64XX_SETUP_I2C1 + bool + help + Common setup code for i2c bus 1. + +config S3C64XX_SETUP_FB_24BPP + bool + help + Common setup code for S3C64XX with an 24bpp RGB display helper. + +config S3C64XX_SETUP_SDHCI_GPIO + bool + help + Common setup code for S3C64XX SDHCI GPIO configurations + +# S36400 Macchine support + +config MACH_SMDK6400 + bool "SMDK6400" + select CPU_S3C6400 + select S3C_DEV_HSMMC + select S3C_DEV_NAND + select S3C64XX_SETUP_SDHCI + help + Machine support for the Samsung SMDK6400 + +# S3C6410 machine support config MACH_ANW6410 bool "A&W6410" @@ -35,7 +91,7 @@ config MACH_SMDK6410 select S3C_DEV_FB select S3C_DEV_USB_HOST select S3C_DEV_USB_HSOTG - select S3C6410_SETUP_SDHCI + select S3C64XX_SETUP_SDHCI select S3C64XX_SETUP_I2C1 select S3C64XX_SETUP_FB_24BPP help @@ -58,7 +114,7 @@ config SMDK6410_SD_CH0 at least some SMDK6410 boards come with the resistors fitted so that the card detects for channels 0 and 1 are the same. - + config SMDK6410_SD_CH1 bool "Use channel 1 only" depends on MACH_SMDK6410 @@ -88,6 +144,21 @@ config SMDK6410_WM1190_EV1 detected at runtime so the the resulting kernel can be used with or without the 1190-EV1 fitted. +config SMDK6410_WM1192_EV1 + bool "Support Wolfson Microelectronics 1192-EV1 PMIC card" + depends on MACH_SMDK6410 + select REGULATOR + select REGULATOR_WM831X + select S3C24XX_GPIO_EXTRA64 + select MFD_WM831X + help + The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC + daughtercard for the Samsung SMDK6410 reference platform. + Enabling this option will build support for this module into + the kernel. The presence of the daughtercard will be + detected at runtime so the the resulting kernel can be used + with or without the 1192-EV1 fitted. + config MACH_NCP bool "NCP" select CPU_S3C6410 diff --git a/arch/arm/plat-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile index b85b4359e93..3758e15086b 100644 --- a/arch/arm/plat-s3c64xx/Makefile +++ b/arch/arm/mach-s3c64xx/Makefile @@ -1,4 +1,4 @@ -# arch/arm/plat-s3c64xx/Makefile +# arch/arm/mach-s3c64xx/Makefile # # Copyright 2008 Openmoko, Inc. # Copyright 2008 Simtec Electronics @@ -7,29 +7,25 @@ obj-y := obj-m := -obj-n := dummy.o +obj-n := obj- := # Core files - -obj-y += dev-uart.o obj-y += cpu.o -obj-y += irq.o -obj-y += irq-eint.o obj-y += clock.o obj-y += gpiolib.o -# CPU support +# Core support for S3C6400 system -obj-$(CONFIG_CPU_S3C6400_INIT) += s3c6400-init.o -obj-$(CONFIG_CPU_S3C6400_CLOCK) += s3c6400-clock.o -obj-$(CONFIG_CPU_FREQ_S3C64XX) += cpufreq.o +obj-$(CONFIG_CPU_S3C6400) += s3c6400.o +obj-$(CONFIG_CPU_S3C6410) += s3c6410.o -# PM support +obj-y += irq.o +obj-y += irq-eint.o -obj-$(CONFIG_PM) += pm.o -obj-$(CONFIG_PM) += sleep.o -obj-$(CONFIG_PM) += irq-pm.o +# CPU frequency scaling + +obj-$(CONFIG_CPU_FREQ_S3C64XX) += cpufreq.o # DMA support @@ -39,6 +35,28 @@ obj-$(CONFIG_S3C64XX_DMA) += dma.o obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o +obj-$(CONFIG_S3C64XX_SETUP_SDHCI) += setup-sdhci.o obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o -obj-$(CONFIG_SND_S3C24XX_SOC) += dev-audio.o + +# PM + +obj-$(CONFIG_PM) += pm.o +obj-$(CONFIG_PM) += sleep.o +obj-$(CONFIG_PM) += irq-pm.o + +# Machine support + +obj-$(CONFIG_MACH_ANW6410) += mach-anw6410.o +obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o +obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o +obj-$(CONFIG_MACH_NCP) += mach-ncp.o +obj-$(CONFIG_MACH_HMT) += mach-hmt.o + +# device support + +obj-y += dev-uart.o +obj-y += dev-rtc.o +obj-y += dev-audio.o +obj-$(CONFIG_S3C_ADC) += dev-adc.o +obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o diff --git a/arch/arm/mach-s3c6400/Makefile.boot b/arch/arm/mach-s3c64xx/Makefile.boot index ba41fdc0a58..ba41fdc0a58 100644 --- a/arch/arm/mach-s3c6400/Makefile.boot +++ b/arch/arm/mach-s3c64xx/Makefile.boot diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c new file mode 100644 index 00000000000..2ac2e7d73e5 --- /dev/null +++ b/arch/arm/mach-s3c64xx/clock.c @@ -0,0 +1,809 @@ +/* linux/arch/arm/plat-s3c64xx/clock.c + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C64XX Base clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> + +#include <mach/hardware.h> +#include <mach/map.h> + +#include <mach/regs-sys.h> +#include <mach/regs-clock.h> +#include <mach/pll.h> + +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/cpu-freq.h> +#include <plat/clock.h> +#include <plat/clock-clksrc.h> + +/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call + * ext_xtal_mux for want of an actual name from the manual. +*/ + +static struct clk clk_ext_xtal_mux = { + .name = "ext_xtal", + .id = -1, +}; + +#define clk_fin_apll clk_ext_xtal_mux +#define clk_fin_mpll clk_ext_xtal_mux +#define clk_fin_epll clk_ext_xtal_mux + +#define clk_fout_mpll clk_mpll +#define clk_fout_epll clk_epll + +struct clk clk_h2 = { + .name = "hclk2", + .id = -1, + .rate = 0, +}; + +struct clk clk_27m = { + .name = "clk_27m", + .id = -1, + .rate = 27000000, +}; + +static int clk_48m_ctrl(struct clk *clk, int enable) +{ + unsigned long flags; + u32 val; + + /* can't rely on clock lock, this register has other usages */ + local_irq_save(flags); + + val = __raw_readl(S3C64XX_OTHERS); + if (enable) + val |= S3C64XX_OTHERS_USBMASK; + else + val &= ~S3C64XX_OTHERS_USBMASK; + + __raw_writel(val, S3C64XX_OTHERS); + local_irq_restore(flags); + + return 0; +} + +struct clk clk_48m = { + .name = "clk_48m", + .id = -1, + .rate = 48000000, + .enable = clk_48m_ctrl, +}; + +static int inline s3c64xx_gate(void __iomem *reg, + struct clk *clk, + int enable) +{ + unsigned int ctrlbit = clk->ctrlbit; + u32 con; + + con = __raw_readl(reg); + + if (enable) + con |= ctrlbit; + else + con &= ~ctrlbit; + + __raw_writel(con, reg); + return 0; +} + +static int s3c64xx_pclk_ctrl(struct clk *clk, int enable) +{ + return s3c64xx_gate(S3C_PCLK_GATE, clk, enable); +} + +static int s3c64xx_hclk_ctrl(struct clk *clk, int enable) +{ + return s3c64xx_gate(S3C_HCLK_GATE, clk, enable); +} + +int s3c64xx_sclk_ctrl(struct clk *clk, int enable) +{ + return s3c64xx_gate(S3C_SCLK_GATE, clk, enable); +} + +static struct clk init_clocks_disable[] = { + { + .name = "nand", + .id = -1, + .parent = &clk_h, + }, { + .name = "adc", + .id = -1, + .parent = &clk_p, + .enable = s3c64xx_pclk_ctrl, + .ctrlbit = S3C_CLKCON_PCLK_TSADC, + }, { + .name = "i2c", + .id = -1, + .parent = &clk_p, + .enable = s3c64xx_pclk_ctrl, + .ctrlbit = S3C_CLKCON_PCLK_IIC, + }, { + .name = "iis", + .id = 0, + .parent = &clk_p, + .enable = s3c64xx_pclk_ctrl, + .ctrlbit = S3C_CLKCON_PCLK_IIS0, + }, { + .name = "iis", + .id = 1, + .parent = &clk_p, + .enable = s3c64xx_pclk_ctrl, + .ctrlbit = S3C_CLKCON_PCLK_IIS1, + }, { +#ifdef CONFIG_CPU_S3C6410 + .name = "iis", + .id = -1, /* There's only one IISv4 port */ + .parent = &clk_p, + .enable = s3c64xx_pclk_ctrl, + .ctrlbit = S3C6410_CLKCON_PCLK_IIS2, + }, { +#endif + .name = "spi", + .id = 0, + .parent = &clk_p, + .enable = s3c64xx_pclk_ctrl, + .ctrlbit = S3C_CLKCON_PCLK_SPI0, + }, { + .name = "spi", + .id = 1, + .parent = &clk_p, + .enable = s3c64xx_pclk_ctrl, + .ctrlbit = S3C_CLKCON_PCLK_SPI1, + }, { + .name = "spi_48m", + .id = 0, + .parent = &clk_48m, + .enable = s3c64xx_sclk_ctrl, + .ctrlbit = S3C_CLKCON_SCLK_SPI0_48, + }, { + .name = "spi_48m", + .id = 1, + .parent = &clk_48m, + .enable = s3c64xx_sclk_ctrl, + .ctrlbit = S3C_CLKCON_SCLK_SPI1_48, + }, { + .name = "48m", + .id = 0, + .parent = &clk_48m, + .enable = s3c64xx_sclk_ctrl, + .ctrlbit = S3C_CLKCON_SCLK_MMC0_48, + }, { + .name = "48m", + .id = 1, + .parent = &clk_48m, + .enable = s3c64xx_sclk_ctrl, + .ctrlbit = S3C_CLKCON_SCLK_MMC1_48, + }, { + .name = "48m", + .id = 2, + .parent = &clk_48m, + .enable = s3c64xx_sclk_ctrl, + .ctrlbit = S3C_CLKCON_SCLK_MMC2_48, + }, { + .name = "dma0", + .id = -1, + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_DMA0, + }, { + .name = "dma1", + .id = -1, + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_DMA1, + }, +}; + +static struct clk init_clocks[] = { + { + .name = "lcd", + .id = -1, + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_LCD, + }, { + .name = "gpio", + .id = -1, + .parent = &clk_p, + .enable = s3c64xx_pclk_ctrl, + .ctrlbit = S3C_CLKCON_PCLK_GPIO, + }, { + .name = "usb-host", + .id = -1, + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_UHOST, + }, { + .name = "hsmmc", + .id = 0, + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_HSMMC0, + }, { + .name = "hsmmc", + .id = 1, + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_HSMMC1, + }, { + .name = "hsmmc", + .id = 2, + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_HSMMC2, + }, { + .name = "timers", + .id = -1, + .parent = &clk_p, + .enable = s3c64xx_pclk_ctrl, + .ctrlbit = S3C_CLKCON_PCLK_PWM, + }, { + .name = "uart", + .id = 0, + .parent = &clk_p, + .enable = s3c64xx_pclk_ctrl, + .ctrlbit = S3C_CLKCON_PCLK_UART0, + }, { + .name = "uart", + .id = 1, + .parent = &clk_p, + .enable = s3c64xx_pclk_ctrl, + .ctrlbit = S3C_CLKCON_PCLK_UART1, + }, { + .name = "uart", + .id = 2, + .parent = &clk_p, + .enable = s3c64xx_pclk_ctrl, + .ctrlbit = S3C_CLKCON_PCLK_UART2, + }, { + .name = "uart", + .id = 3, + .parent = &clk_p, + .enable = s3c64xx_pclk_ctrl, + .ctrlbit = S3C_CLKCON_PCLK_UART3, + }, { + .name = "rtc", + .id = -1, + .parent = &clk_p, + .enable = s3c64xx_pclk_ctrl, + .ctrlbit = S3C_CLKCON_PCLK_RTC, + }, { + .name = "watchdog", + .id = -1, + .parent = &clk_p, + .ctrlbit = S3C_CLKCON_PCLK_WDT, + }, { + .name = "ac97", + .id = -1, + .parent = &clk_p, + .ctrlbit = S3C_CLKCON_PCLK_AC97, + } +}; + + +static struct clk clk_fout_apll = { + .name = "fout_apll", + .id = -1, +}; + +static struct clk *clk_src_apll_list[] = { + [0] = &clk_fin_apll, + [1] = &clk_fout_apll, +}; + +static struct clksrc_sources clk_src_apll = { + .sources = clk_src_apll_list, + .nr_sources = ARRAY_SIZE(clk_src_apll_list), +}; + +static struct clksrc_clk clk_mout_apll = { + .clk = { + .name = "mout_apll", + .id = -1, + }, + .reg_src = { .reg = S3C_CLK_SRC, .shift = 0, .size = 1 }, + .sources = &clk_src_apll, +}; + +static struct clk *clk_src_epll_list[] = { + [0] = &clk_fin_epll, + [1] = &clk_fout_epll, +}; + +static struct clksrc_sources clk_src_epll = { + .sources = clk_src_epll_list, + .nr_sources = ARRAY_SIZE(clk_src_epll_list), +}; + +static struct clksrc_clk clk_mout_epll = { + .clk = { + .name = "mout_epll", + .id = -1, + }, + .reg_src = { .reg = S3C_CLK_SRC, .shift = 2, .size = 1 }, + .sources = &clk_src_epll, +}; + +static struct clk *clk_src_mpll_list[] = { + [0] = &clk_fin_mpll, + [1] = &clk_fout_mpll, +}; + +static struct clksrc_sources clk_src_mpll = { + .sources = clk_src_mpll_list, + .nr_sources = ARRAY_SIZE(clk_src_mpll_list), +}; + +static struct clksrc_clk clk_mout_mpll = { + .clk = { + .name = "mout_mpll", + .id = -1, + }, + .reg_src = { .reg = S3C_CLK_SRC, .shift = 1, .size = 1 }, + .sources = &clk_src_mpll, +}; + +static unsigned int armclk_mask; + +static unsigned long s3c64xx_clk_arm_get_rate(struct clk *clk) +{ + unsigned long rate = clk_get_rate(clk->parent); + u32 clkdiv; + + /* divisor mask starts at bit0, so no need to shift */ + clkdiv = __raw_readl(S3C_CLK_DIV0) & armclk_mask; + + return rate / (clkdiv + 1); +} + +static unsigned long s3c64xx_clk_arm_round_rate(struct clk *clk, + unsigned long rate) +{ + unsigned long parent = clk_get_rate(clk->parent); + u32 div; + + if (parent < rate) + return parent; + + div = (parent / rate) - 1; + if (div > armclk_mask) + div = armclk_mask; + + return parent / (div + 1); +} + +static int s3c64xx_clk_arm_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned long parent = clk_get_rate(clk->parent); + u32 div; + u32 val; + + if (rate < parent / (armclk_mask + 1)) + return -EINVAL; + + rate = clk_round_rate(clk, rate); + div = clk_get_rate(clk->parent) / rate; + + val = __raw_readl(S3C_CLK_DIV0); + val &= ~armclk_mask; + val |= (div - 1); + __raw_writel(val, S3C_CLK_DIV0); + + return 0; + +} + +static struct clk clk_arm = { + .name = "armclk", + .id = -1, + .parent = &clk_mout_apll.clk, + .ops = &(struct clk_ops) { + .get_rate = s3c64xx_clk_arm_get_rate, + .set_rate = s3c64xx_clk_arm_set_rate, + .round_rate = s3c64xx_clk_arm_round_rate, + }, +}; + +static unsigned long s3c64xx_clk_doutmpll_get_rate(struct clk *clk) +{ + unsigned long rate = clk_get_rate(clk->parent); + + printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate); + + if (__raw_readl(S3C_CLK_DIV0) & S3C6400_CLKDIV0_MPLL_MASK) + rate /= 2; + + return rate; +} + +static struct clk_ops clk_dout_ops = { + .get_rate = s3c64xx_clk_doutmpll_get_rate, +}; + +static struct clk clk_dout_mpll = { + .name = "dout_mpll", + .id = -1, + .parent = &clk_mout_mpll.clk, + .ops = &clk_dout_ops, +}; + +static struct clk *clkset_spi_mmc_list[] = { + &clk_mout_epll.clk, + &clk_dout_mpll, + &clk_fin_epll, + &clk_27m, +}; + +static struct clksrc_sources clkset_spi_mmc = { + .sources = clkset_spi_mmc_list, + .nr_sources = ARRAY_SIZE(clkset_spi_mmc_list), +}; + +static struct clk *clkset_irda_list[] = { + &clk_mout_epll.clk, + &clk_dout_mpll, + NULL, + &clk_27m, +}; + +static struct clksrc_sources clkset_irda = { + .sources = clkset_irda_list, + .nr_sources = ARRAY_SIZE(clkset_irda_list), +}; + +static struct clk *clkset_uart_list[] = { + &clk_mout_epll.clk, + &clk_dout_mpll, + NULL, + NULL +}; + +static struct clksrc_sources clkset_uart = { + .sources = clkset_uart_list, + .nr_sources = ARRAY_SIZE(clkset_uart_list), +}; + +static struct clk *clkset_uhost_list[] = { + &clk_48m, + &clk_mout_epll.clk, + &clk_dout_mpll, + &clk_fin_epll, +}; + +static struct clksrc_sources clkset_uhost = { + .sources = clkset_uhost_list, + .nr_sources = ARRAY_SIZE(clkset_uhost_list), +}; + +/* The peripheral clocks are all controlled via clocksource followed + * by an optional divider and gate stage. We currently roll this into + * one clock which hides the intermediate clock from the mux. + * + * Note, the JPEG clock can only be an even divider... + * + * The scaler and LCD clocks depend on the S3C64XX version, and also + * have a common parent divisor so are not included here. + */ + +/* clocks that feed other parts of the clock source tree */ + +static struct clk clk_iis_cd0 = { + .name = "iis_cdclk0", + .id = -1, +}; + +static struct clk clk_iis_cd1 = { + .name = "iis_cdclk1", + .id = -1, +}; + +static struct clk clk_pcm_cd = { + .name = "pcm_cdclk", + .id = -1, +}; + +static struct clk *clkset_audio0_list[] = { + [0] = &clk_mout_epll.clk, + [1] = &clk_dout_mpll, + [2] = &clk_fin_epll, + [3] = &clk_iis_cd0, + [4] = &clk_pcm_cd, +}; + +static struct clksrc_sources clkset_audio0 = { + .sources = clkset_audio0_list, + .nr_sources = ARRAY_SIZE(clkset_audio0_list), +}; + +static struct clk *clkset_audio1_list[] = { + [0] = &clk_mout_epll.clk, + [1] = &clk_dout_mpll, + [2] = &clk_fin_epll, + [3] = &clk_iis_cd1, + [4] = &clk_pcm_cd, +}; + +static struct clksrc_sources clkset_audio1 = { + .sources = clkset_audio1_list, + .nr_sources = ARRAY_SIZE(clkset_audio1_list), +}; + +static struct clk *clkset_camif_list[] = { + &clk_h2, +}; + +static struct clksrc_sources clkset_camif = { + .sources = clkset_camif_list, + .nr_sources = ARRAY_SIZE(clkset_camif_list), +}; + +static struct clksrc_clk clksrcs[] = { + { + .clk = { + .name = "mmc_bus", + .id = 0, + .ctrlbit = S3C_CLKCON_SCLK_MMC0, + .enable = s3c64xx_sclk_ctrl, + }, + .reg_src = { .reg = S3C_CLK_SRC, .shift = 18, .size = 2 }, + .reg_div = { .reg = S3C_CLK_DIV1, .shift = 0, .size = 4 }, + .sources = &clkset_spi_mmc, + }, { + .clk = { + .name = "mmc_bus", + .id = 1, + .ctrlbit = S3C_CLKCON_SCLK_MMC1, + .enable = s3c64xx_sclk_ctrl, + }, + .reg_src = { .reg = S3C_CLK_SRC, .shift = 20, .size = 2 }, + .reg_div = { .reg = S3C_CLK_DIV1, .shift = 4, .size = 4 }, + .sources = &clkset_spi_mmc, + }, { + .clk = { + .name = "mmc_bus", + .id = 2, + .ctrlbit = S3C_CLKCON_SCLK_MMC2, + .enable = s3c64xx_sclk_ctrl, + }, + .reg_src = { .reg = S3C_CLK_SRC, .shift = 22, .size = 2 }, + .reg_div = { .reg = S3C_CLK_DIV1, .shift = 8, .size = 4 }, + .sources = &clkset_spi_mmc, + }, { + .clk = { + .name = "usb-bus-host", + .id = -1, + .ctrlbit = S3C_CLKCON_SCLK_UHOST, + .enable = s3c64xx_sclk_ctrl, + }, + .reg_src = { .reg = S3C_CLK_SRC, .shift = 5, .size = 2 }, + .reg_div = { .reg = S3C_CLK_DIV1, .shift = 20, .size = 4 }, + .sources = &clkset_uhost, + }, { + .clk = { + .name = "uclk1", + .id = -1, + .ctrlbit = S3C_CLKCON_SCLK_UART, + .enable = s3c64xx_sclk_ctrl, + }, + .reg_src = { .reg = S3C_CLK_SRC, .shift = 13, .size = 1 }, + .reg_div = { .reg = S3C_CLK_DIV2, .shift = 16, .size = 4 }, + .sources = &clkset_uart, + }, { +/* Where does UCLK0 come from? */ + .clk = { + .name = "spi-bus", + .id = 0, + .ctrlbit = S3C_CLKCON_SCLK_SPI0, + .enable = s3c64xx_sclk_ctrl, + }, + .reg_src = { .reg = S3C_CLK_SRC, .shift = 14, .size = 2 }, + .reg_div = { .reg = S3C_CLK_DIV2, .shift = 0, .size = 4 }, + .sources = &clkset_spi_mmc, + }, { + .clk = { + .name = "spi-bus", + .id = 1, + .ctrlbit = S3C_CLKCON_SCLK_SPI1, + .enable = s3c64xx_sclk_ctrl, + }, + .reg_src = { .reg = S3C_CLK_SRC, .shift = 16, .size = 2 }, + .reg_div = { .reg = S3C_CLK_DIV2, .shift = 4, .size = 4 }, + .sources = &clkset_spi_mmc, + }, { + .clk = { + .name = "audio-bus", + .id = 0, + .ctrlbit = S3C_CLKCON_SCLK_AUDIO0, + .enable = s3c64xx_sclk_ctrl, + }, + .reg_src = { .reg = S3C_CLK_SRC, .shift = 7, .size = 3 }, + .reg_div = { .reg = S3C_CLK_DIV2, .shift = 8, .size = 4 }, + .sources = &clkset_audio0, + }, { + .clk = { + .name = "audio-bus", + .id = 1, + .ctrlbit = S3C_CLKCON_SCLK_AUDIO1, + .enable = s3c64xx_sclk_ctrl, + }, + .reg_src = { .reg = S3C_CLK_SRC, .shift = 10, .size = 3 }, + .reg_div = { .reg = S3C_CLK_DIV2, .shift = 12, .size = 4 }, + .sources = &clkset_audio1, + }, { + .clk = { + .name = "irda-bus", + .id = 0, + .ctrlbit = S3C_CLKCON_SCLK_IRDA, + .enable = s3c64xx_sclk_ctrl, + }, + .reg_src = { .reg = S3C_CLK_SRC, .shift = 24, .size = 2 }, + .reg_div = { .reg = S3C_CLK_DIV2, .shift = 20, .size = 4 }, + .sources = &clkset_irda, + }, { + .clk = { + .name = "camera", + .id = -1, + .ctrlbit = S3C_CLKCON_SCLK_CAM, + .enable = s3c64xx_sclk_ctrl, + }, + .reg_div = { .reg = S3C_CLK_DIV0, .shift = 20, .size = 4 }, + .reg_src = { .reg = NULL, .shift = 0, .size = 0 }, + .sources = &clkset_camif, + }, +}; + +/* Clock initialisation code */ + +static struct clksrc_clk *init_parents[] = { + &clk_mout_apll, + &clk_mout_epll, + &clk_mout_mpll, +}; + +#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1) + +void __init_or_cpufreq s3c6400_setup_clocks(void) +{ + struct clk *xtal_clk; + unsigned long xtal; + unsigned long fclk; + unsigned long hclk; + unsigned long hclk2; + unsigned long pclk; + unsigned long epll; + unsigned long apll; + unsigned long mpll; + unsigned int ptr; + u32 clkdiv0; + + printk(KERN_DEBUG "%s: registering clocks\n", __func__); + + clkdiv0 = __raw_readl(S3C_CLK_DIV0); + printk(KERN_DEBUG "%s: clkdiv0 = %08x\n", __func__, clkdiv0); + + xtal_clk = clk_get(NULL, "xtal"); + BUG_ON(IS_ERR(xtal_clk)); + + xtal = clk_get_rate(xtal_clk); + clk_put(xtal_clk); + + printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal); + + /* For now assume the mux always selects the crystal */ + clk_ext_xtal_mux.parent = xtal_clk; + + epll = s3c6400_get_epll(xtal); + mpll = s3c6400_get_pll(xtal, __raw_readl(S3C_MPLL_CON)); + apll = s3c6400_get_pll(xtal, __raw_readl(S3C_APLL_CON)); + + fclk = mpll; + + printk(KERN_INFO "S3C64XX: PLL settings, A=%ld, M=%ld, E=%ld\n", + apll, mpll, epll); + + hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2); + hclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK); + pclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_PCLK); + + printk(KERN_INFO "S3C64XX: HCLK2=%ld, HCLK=%ld, PCLK=%ld\n", + hclk2, hclk, pclk); + + clk_fout_mpll.rate = mpll; + clk_fout_epll.rate = epll; + clk_fout_apll.rate = apll; + + clk_h2.rate = hclk2; + clk_h.rate = hclk; + clk_p.rate = pclk; + clk_f.rate = fclk; + + for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++) + s3c_set_clksrc(init_parents[ptr], true); + + for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) + s3c_set_clksrc(&clksrcs[ptr], true); +} + +static struct clk *clks1[] __initdata = { + &clk_ext_xtal_mux, + &clk_iis_cd0, + &clk_iis_cd1, + &clk_pcm_cd, + &clk_mout_epll.clk, + &clk_mout_mpll.clk, + &clk_dout_mpll, + &clk_arm, +}; + +static struct clk *clks[] __initdata = { + &clk_ext, + &clk_epll, + &clk_27m, + &clk_48m, + &clk_h2, +}; + +/** + * s3c64xx_register_clocks - register clocks for s3c6400 and s3c6410 + * @xtal: The rate for the clock crystal feeding the PLLs. + * @armclk_divlimit: Divisor mask for ARMCLK. + * + * Register the clocks for the S3C6400 and S3C6410 SoC range, such + * as ARMCLK as well as the necessary parent clocks. + * + * This call does not setup the clocks, which is left to the + * s3c6400_setup_clocks() call which may be needed by the cpufreq + * or resume code to re-set the clocks if the bootloader has changed + * them. + */ +void __init s3c64xx_register_clocks(unsigned long xtal, + unsigned armclk_divlimit) +{ + struct clk *clkp; + int ret; + int ptr; + + armclk_mask = armclk_divlimit; + + s3c24xx_register_baseclocks(xtal); + s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); + + s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); + + clkp = init_clocks_disable; + for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) { + + ret = s3c24xx_register_clock(clkp); + if (ret < 0) { + printk(KERN_ERR "Failed to register clock %s (%d)\n", + clkp->name, ret); + } + + (clkp->enable)(clkp, 0); + } + + s3c24xx_register_clocks(clks1, ARRAY_SIZE(clks1)); + s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); + s3c_pwmclk_init(); +} diff --git a/arch/arm/plat-s3c64xx/cpu.c b/arch/arm/mach-s3c64xx/cpu.c index 49796d2db86..374e45e566b 100644 --- a/arch/arm/plat-s3c64xx/cpu.c +++ b/arch/arm/mach-s3c64xx/cpu.c @@ -33,8 +33,8 @@ #include <plat/devs.h> #include <plat/clock.h> -#include <plat/s3c6400.h> -#include <plat/s3c6410.h> +#include <mach/s3c6400.h> +#include <mach/s3c6410.h> /* table of supported CPUs */ @@ -73,17 +73,22 @@ static struct map_desc s3c_iodesc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE, }, { + .virtual = (unsigned long)S3C_VA_MEM, + .pfn = __phys_to_pfn(S3C64XX_PA_SROM), + .length = SZ_4K, + .type = MT_DEVICE, + }, { .virtual = (unsigned long)(S3C_VA_UART + UART_OFFS), .pfn = __phys_to_pfn(S3C_PA_UART), .length = SZ_4K, .type = MT_DEVICE, }, { - .virtual = (unsigned long)S3C_VA_VIC0, + .virtual = (unsigned long)VA_VIC0, .pfn = __phys_to_pfn(S3C64XX_PA_VIC0), .length = SZ_16K, .type = MT_DEVICE, }, { - .virtual = (unsigned long)S3C_VA_VIC1, + .virtual = (unsigned long)VA_VIC1, .pfn = __phys_to_pfn(S3C64XX_PA_VIC1), .length = SZ_16K, .type = MT_DEVICE, @@ -124,6 +129,12 @@ static struct sys_device s3c64xx_sysdev = { .cls = &s3c64xx_sysclass, }; +/* uart registration process */ + +void __init s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) +{ + s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no); +} /* read cpu identification code */ diff --git a/arch/arm/plat-s3c64xx/cpufreq.c b/arch/arm/mach-s3c64xx/cpufreq.c index 74c0e8347de..74c0e8347de 100644 --- a/arch/arm/plat-s3c64xx/cpufreq.c +++ b/arch/arm/mach-s3c64xx/cpufreq.c diff --git a/arch/arm/mach-s3c64xx/dev-adc.c b/arch/arm/mach-s3c64xx/dev-adc.c new file mode 100644 index 00000000000..fafef9b6bcf --- /dev/null +++ b/arch/arm/mach-s3c64xx/dev-adc.c @@ -0,0 +1,46 @@ +/* linux/arch/arm/plat-s3c64xx/dev-adc.c + * + * Copyright 2010 Maurus Cuelenaere + * + * S3C64xx series device definition for ADC device + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/platform_device.h> + +#include <mach/irqs.h> +#include <mach/map.h> + +#include <plat/adc.h> +#include <plat/devs.h> +#include <plat/cpu.h> + +static struct resource s3c_adc_resource[] = { + [0] = { + .start = S3C64XX_PA_ADC, + .end = S3C64XX_PA_ADC + SZ_256 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_TC, + .end = IRQ_TC, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_ADC, + .end = IRQ_ADC, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device s3c_device_adc = { + .name = "s3c64xx-adc", + .id = -1, + .num_resources = ARRAY_SIZE(s3c_adc_resource), + .resource = s3c_adc_resource, +}; diff --git a/arch/arm/mach-s3c64xx/dev-audio.c b/arch/arm/mach-s3c64xx/dev-audio.c new file mode 100644 index 00000000000..c3e9e73bd0f --- /dev/null +++ b/arch/arm/mach-s3c64xx/dev-audio.c @@ -0,0 +1,335 @@ +/* linux/arch/arm/plat-s3c/dev-audio.c + * + * Copyright 2009 Wolfson Microelectronics + * Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> + +#include <mach/irqs.h> +#include <mach/map.h> +#include <mach/dma.h> +#include <mach/gpio.h> + +#include <plat/devs.h> +#include <plat/audio.h> +#include <plat/gpio-cfg.h> + +#include <mach/gpio-bank-c.h> +#include <mach/gpio-bank-d.h> +#include <mach/gpio-bank-e.h> +#include <mach/gpio-bank-h.h> + +static int s3c64xx_i2sv3_cfg_gpio(struct platform_device *pdev) +{ + switch (pdev->id) { + case 0: + s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_I2S0_CLK); + s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_I2S0_CDCLK); + s3c_gpio_cfgpin(S3C64XX_GPD(2), S3C64XX_GPD2_I2S0_LRCLK); + s3c_gpio_cfgpin(S3C64XX_GPD(3), S3C64XX_GPD3_I2S0_DI); + s3c_gpio_cfgpin(S3C64XX_GPD(4), S3C64XX_GPD4_I2S0_D0); + break; + case 1: + s3c_gpio_cfgpin(S3C64XX_GPE(0), S3C64XX_GPE0_I2S1_CLK); + s3c_gpio_cfgpin(S3C64XX_GPE(1), S3C64XX_GPE1_I2S1_CDCLK); + s3c_gpio_cfgpin(S3C64XX_GPE(2), S3C64XX_GPE2_I2S1_LRCLK); + s3c_gpio_cfgpin(S3C64XX_GPE(3), S3C64XX_GPE3_I2S1_DI); + s3c_gpio_cfgpin(S3C64XX_GPE(4), S3C64XX_GPE4_I2S1_D0); + default: + printk(KERN_DEBUG "Invalid I2S Controller number!"); + return -EINVAL; + } + + return 0; +} + +static int s3c64xx_i2sv4_cfg_gpio(struct platform_device *pdev) +{ + s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C64XX_GPC4_I2S_V40_DO0); + s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C64XX_GPC5_I2S_V40_DO1); + s3c_gpio_cfgpin(S3C64XX_GPC(7), S3C64XX_GPC7_I2S_V40_DO2); + s3c_gpio_cfgpin(S3C64XX_GPH(6), S3C64XX_GPH6_I2S_V40_BCLK); + s3c_gpio_cfgpin(S3C64XX_GPH(7), S3C64XX_GPH7_I2S_V40_CDCLK); + s3c_gpio_cfgpin(S3C64XX_GPH(8), S3C64XX_GPH8_I2S_V40_LRCLK); + s3c_gpio_cfgpin(S3C64XX_GPH(9), S3C64XX_GPH9_I2S_V40_DI); + + return 0; +} + +static struct resource s3c64xx_iis0_resource[] = { + [0] = { + .start = S3C64XX_PA_IIS0, + .end = S3C64XX_PA_IIS0 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_I2S0_OUT, + .end = DMACH_I2S0_OUT, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_I2S0_IN, + .end = DMACH_I2S0_IN, + .flags = IORESOURCE_DMA, + }, +}; + +static struct s3c_audio_pdata s3c_i2s0_pdata = { + .cfg_gpio = s3c64xx_i2sv3_cfg_gpio, +}; + +struct platform_device s3c64xx_device_iis0 = { + .name = "s3c64xx-iis", + .id = 0, + .num_resources = ARRAY_SIZE(s3c64xx_iis0_resource), + .resource = s3c64xx_iis0_resource, + .dev = { + .platform_data = &s3c_i2s0_pdata, + }, +}; +EXPORT_SYMBOL(s3c64xx_device_iis0); + +static struct resource s3c64xx_iis1_resource[] = { + [0] = { + .start = S3C64XX_PA_IIS1, + .end = S3C64XX_PA_IIS1 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_I2S1_OUT, + .end = DMACH_I2S1_OUT, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_I2S1_IN, + .end = DMACH_I2S1_IN, + .flags = IORESOURCE_DMA, + }, +}; + +static struct s3c_audio_pdata s3c_i2s1_pdata = { + .cfg_gpio = s3c64xx_i2sv3_cfg_gpio, +}; + +struct platform_device s3c64xx_device_iis1 = { + .name = "s3c64xx-iis", + .id = 1, + .num_resources = ARRAY_SIZE(s3c64xx_iis1_resource), + .resource = s3c64xx_iis1_resource, + .dev = { + .platform_data = &s3c_i2s1_pdata, + }, +}; +EXPORT_SYMBOL(s3c64xx_device_iis1); + +static struct resource s3c64xx_iisv4_resource[] = { + [0] = { + .start = S3C64XX_PA_IISV4, + .end = S3C64XX_PA_IISV4 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_HSI_I2SV40_TX, + .end = DMACH_HSI_I2SV40_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_HSI_I2SV40_RX, + .end = DMACH_HSI_I2SV40_RX, + .flags = IORESOURCE_DMA, + }, +}; + +static struct s3c_audio_pdata s3c_i2sv4_pdata = { + .cfg_gpio = s3c64xx_i2sv4_cfg_gpio, +}; + +struct platform_device s3c64xx_device_iisv4 = { + .name = "s3c64xx-iis-v4", + .id = -1, + .num_resources = ARRAY_SIZE(s3c64xx_iisv4_resource), + .resource = s3c64xx_iisv4_resource, + .dev = { + .platform_data = &s3c_i2sv4_pdata, + }, +}; +EXPORT_SYMBOL(s3c64xx_device_iisv4); + + +/* PCM Controller platform_devices */ + +static int s3c64xx_pcm_cfg_gpio(struct platform_device *pdev) +{ + switch (pdev->id) { + case 0: + s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_PCM0_SCLK); + s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_PCM0_EXTCLK); + s3c_gpio_cfgpin(S3C64XX_GPD(2), S3C64XX_GPD2_PCM0_FSYNC); + s3c_gpio_cfgpin(S3C64XX_GPD(3), S3C64XX_GPD3_PCM0_SIN); + s3c_gpio_cfgpin(S3C64XX_GPD(4), S3C64XX_GPD4_PCM0_SOUT); + break; + case 1: + s3c_gpio_cfgpin(S3C64XX_GPE(0), S3C64XX_GPE0_PCM1_SCLK); + s3c_gpio_cfgpin(S3C64XX_GPE(1), S3C64XX_GPE1_PCM1_EXTCLK); + s3c_gpio_cfgpin(S3C64XX_GPE(2), S3C64XX_GPE2_PCM1_FSYNC); + s3c_gpio_cfgpin(S3C64XX_GPE(3), S3C64XX_GPE3_PCM1_SIN); + s3c_gpio_cfgpin(S3C64XX_GPE(4), S3C64XX_GPE4_PCM1_SOUT); + break; + default: + printk(KERN_DEBUG "Invalid PCM Controller number!"); + return -EINVAL; + } + + return 0; +} + +static struct resource s3c64xx_pcm0_resource[] = { + [0] = { + .start = S3C64XX_PA_PCM0, + .end = S3C64XX_PA_PCM0 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_PCM0_TX, + .end = DMACH_PCM0_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_PCM0_RX, + .end = DMACH_PCM0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +static struct s3c_audio_pdata s3c_pcm0_pdata = { + .cfg_gpio = s3c64xx_pcm_cfg_gpio, +}; + +struct platform_device s3c64xx_device_pcm0 = { + .name = "samsung-pcm", + .id = 0, + .num_resources = ARRAY_SIZE(s3c64xx_pcm0_resource), + .resource = s3c64xx_pcm0_resource, + .dev = { + .platform_data = &s3c_pcm0_pdata, + }, +}; +EXPORT_SYMBOL(s3c64xx_device_pcm0); + +static struct resource s3c64xx_pcm1_resource[] = { + [0] = { + .start = S3C64XX_PA_PCM1, + .end = S3C64XX_PA_PCM1 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_PCM1_TX, + .end = DMACH_PCM1_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_PCM1_RX, + .end = DMACH_PCM1_RX, + .flags = IORESOURCE_DMA, + }, +}; + +static struct s3c_audio_pdata s3c_pcm1_pdata = { + .cfg_gpio = s3c64xx_pcm_cfg_gpio, +}; + +struct platform_device s3c64xx_device_pcm1 = { + .name = "samsung-pcm", + .id = 1, + .num_resources = ARRAY_SIZE(s3c64xx_pcm1_resource), + .resource = s3c64xx_pcm1_resource, + .dev = { + .platform_data = &s3c_pcm1_pdata, + }, +}; +EXPORT_SYMBOL(s3c64xx_device_pcm1); + +/* AC97 Controller platform devices */ + +static int s3c64xx_ac97_cfg_gpd(struct platform_device *pdev) +{ + s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_AC97_BITCLK); + s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_AC97_nRESET); + s3c_gpio_cfgpin(S3C64XX_GPD(2), S3C64XX_GPD2_AC97_SYNC); + s3c_gpio_cfgpin(S3C64XX_GPD(3), S3C64XX_GPD3_AC97_SDI); + s3c_gpio_cfgpin(S3C64XX_GPD(4), S3C64XX_GPD4_AC97_SDO); + + return 0; +} + +static int s3c64xx_ac97_cfg_gpe(struct platform_device *pdev) +{ + s3c_gpio_cfgpin(S3C64XX_GPE(0), S3C64XX_GPE0_AC97_BITCLK); + s3c_gpio_cfgpin(S3C64XX_GPE(1), S3C64XX_GPE1_AC97_nRESET); + s3c_gpio_cfgpin(S3C64XX_GPE(2), S3C64XX_GPE2_AC97_SYNC); + s3c_gpio_cfgpin(S3C64XX_GPE(3), S3C64XX_GPE3_AC97_SDI); + s3c_gpio_cfgpin(S3C64XX_GPE(4), S3C64XX_GPE4_AC97_SDO); + + return 0; +} + +static struct resource s3c64xx_ac97_resource[] = { + [0] = { + .start = S3C64XX_PA_AC97, + .end = S3C64XX_PA_AC97 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_AC97_PCMOUT, + .end = DMACH_AC97_PCMOUT, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_AC97_PCMIN, + .end = DMACH_AC97_PCMIN, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = DMACH_AC97_MICIN, + .end = DMACH_AC97_MICIN, + .flags = IORESOURCE_DMA, + }, + [4] = { + .start = IRQ_AC97, + .end = IRQ_AC97, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct s3c_audio_pdata s3c_ac97_pdata; + +static u64 s3c64xx_ac97_dmamask = DMA_BIT_MASK(32); + +struct platform_device s3c64xx_device_ac97 = { + .name = "s3c-ac97", + .id = -1, + .num_resources = ARRAY_SIZE(s3c64xx_ac97_resource), + .resource = s3c64xx_ac97_resource, + .dev = { + .platform_data = &s3c_ac97_pdata, + .dma_mask = &s3c64xx_ac97_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; +EXPORT_SYMBOL(s3c64xx_device_ac97); + +void __init s3c64xx_ac97_setup_gpio(int num) +{ + if (num == S3C64XX_AC97_GPD) + s3c_ac97_pdata.cfg_gpio = s3c64xx_ac97_cfg_gpd; + else + s3c_ac97_pdata.cfg_gpio = s3c64xx_ac97_cfg_gpe; +} diff --git a/arch/arm/mach-s3c64xx/dev-rtc.c b/arch/arm/mach-s3c64xx/dev-rtc.c new file mode 100644 index 00000000000..b9e7a05f012 --- /dev/null +++ b/arch/arm/mach-s3c64xx/dev-rtc.c @@ -0,0 +1,43 @@ +/* linux/arch/arm/plat-s3c64xx/dev-rtc.c + * + * Copyright 2009 by Maurus Cuelenaere <mcuelenaere@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/platform_device.h> + +#include <mach/irqs.h> +#include <mach/map.h> + +#include <plat/devs.h> + +static struct resource s3c_rtc_resource[] = { + [0] = { + .start = S3C64XX_PA_RTC, + .end = S3C64XX_PA_RTC + 0xff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_RTC_ALARM, + .end = IRQ_RTC_ALARM, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_RTC_TIC, + .end = IRQ_RTC_TIC, + .flags = IORESOURCE_IRQ + } +}; + +struct platform_device s3c_device_rtc = { + .name = "s3c64xx-rtc", + .id = -1, + .num_resources = ARRAY_SIZE(s3c_rtc_resource), + .resource = s3c_rtc_resource, +}; +EXPORT_SYMBOL(s3c_device_rtc); diff --git a/arch/arm/mach-s3c64xx/dev-spi.c b/arch/arm/mach-s3c64xx/dev-spi.c new file mode 100644 index 00000000000..29c32d08851 --- /dev/null +++ b/arch/arm/mach-s3c64xx/dev-spi.c @@ -0,0 +1,182 @@ +/* linux/arch/arm/plat-s3c64xx/dev-spi.c + * + * Copyright (C) 2009 Samsung Electronics Ltd. + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> + +#include <mach/dma.h> +#include <mach/map.h> +#include <mach/gpio.h> +#include <mach/gpio-bank-c.h> +#include <mach/spi-clocks.h> + +#include <plat/s3c64xx-spi.h> +#include <plat/gpio-cfg.h> +#include <plat/irqs.h> + +static char *spi_src_clks[] = { + [S3C64XX_SPI_SRCCLK_PCLK] = "pclk", + [S3C64XX_SPI_SRCCLK_SPIBUS] = "spi-bus", + [S3C64XX_SPI_SRCCLK_48M] = "spi_48m", +}; + +/* SPI Controller platform_devices */ + +/* Since we emulate multi-cs capability, we do not touch the GPC-3,7. + * The emulated CS is toggled by board specific mechanism, as it can + * be either some immediate GPIO or some signal out of some other + * chip in between ... or some yet another way. + * We simply do not assume anything about CS. + */ +static int s3c64xx_spi_cfg_gpio(struct platform_device *pdev) +{ + switch (pdev->id) { + case 0: + s3c_gpio_cfgpin(S3C64XX_GPC(0), S3C64XX_GPC0_SPI_MISO0); + s3c_gpio_cfgpin(S3C64XX_GPC(1), S3C64XX_GPC1_SPI_CLKO); + s3c_gpio_cfgpin(S3C64XX_GPC(2), S3C64XX_GPC2_SPI_MOSIO); + s3c_gpio_setpull(S3C64XX_GPC(0), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S3C64XX_GPC(1), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S3C64XX_GPC(2), S3C_GPIO_PULL_UP); + break; + + case 1: + s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C64XX_GPC4_SPI_MISO1); + s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C64XX_GPC5_SPI_CLK1); + s3c_gpio_cfgpin(S3C64XX_GPC(6), S3C64XX_GPC6_SPI_MOSI1); + s3c_gpio_setpull(S3C64XX_GPC(4), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S3C64XX_GPC(5), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S3C64XX_GPC(6), S3C_GPIO_PULL_UP); + break; + + default: + dev_err(&pdev->dev, "Invalid SPI Controller number!"); + return -EINVAL; + } + + return 0; +} + +static struct resource s3c64xx_spi0_resource[] = { + [0] = { + .start = S3C64XX_PA_SPI0, + .end = S3C64XX_PA_SPI0 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_SPI0_TX, + .end = DMACH_SPI0_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_SPI0_RX, + .end = DMACH_SPI0_RX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = IRQ_SPI0, + .end = IRQ_SPI0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct s3c64xx_spi_info s3c64xx_spi0_pdata = { + .cfg_gpio = s3c64xx_spi_cfg_gpio, + .fifo_lvl_mask = 0x7f, + .rx_lvl_offset = 13, +}; + +static u64 spi_dmamask = DMA_BIT_MASK(32); + +struct platform_device s3c64xx_device_spi0 = { + .name = "s3c64xx-spi", + .id = 0, + .num_resources = ARRAY_SIZE(s3c64xx_spi0_resource), + .resource = s3c64xx_spi0_resource, + .dev = { + .dma_mask = &spi_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &s3c64xx_spi0_pdata, + }, +}; +EXPORT_SYMBOL(s3c64xx_device_spi0); + +static struct resource s3c64xx_spi1_resource[] = { + [0] = { + .start = S3C64XX_PA_SPI1, + .end = S3C64XX_PA_SPI1 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_SPI1_TX, + .end = DMACH_SPI1_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_SPI1_RX, + .end = DMACH_SPI1_RX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = IRQ_SPI1, + .end = IRQ_SPI1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct s3c64xx_spi_info s3c64xx_spi1_pdata = { + .cfg_gpio = s3c64xx_spi_cfg_gpio, + .fifo_lvl_mask = 0x7f, + .rx_lvl_offset = 13, +}; + +struct platform_device s3c64xx_device_spi1 = { + .name = "s3c64xx-spi", + .id = 1, + .num_resources = ARRAY_SIZE(s3c64xx_spi1_resource), + .resource = s3c64xx_spi1_resource, + .dev = { + .dma_mask = &spi_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &s3c64xx_spi1_pdata, + }, +}; +EXPORT_SYMBOL(s3c64xx_device_spi1); + +void __init s3c64xx_spi_set_info(int cntrlr, int src_clk_nr, int num_cs) +{ + struct s3c64xx_spi_info *pd; + + /* Reject invalid configuration */ + if (!num_cs || src_clk_nr < 0 + || src_clk_nr > S3C64XX_SPI_SRCCLK_48M) { + printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__); + return; + } + + switch (cntrlr) { + case 0: + pd = &s3c64xx_spi0_pdata; + break; + case 1: + pd = &s3c64xx_spi1_pdata; + break; + default: + printk(KERN_ERR "%s: Invalid SPI controller(%d)\n", + __func__, cntrlr); + return; + } + + pd->num_cs = num_cs; + pd->src_clk_nr = src_clk_nr; + pd->src_clk_name = spi_src_clks[src_clk_nr]; +} diff --git a/arch/arm/plat-s3c64xx/dev-uart.c b/arch/arm/mach-s3c64xx/dev-uart.c index 62c11a6fc7b..f797f748b99 100644 --- a/arch/arm/plat-s3c64xx/dev-uart.c +++ b/arch/arm/mach-s3c64xx/dev-uart.c @@ -145,32 +145,3 @@ struct s3c24xx_uart_resources s3c64xx_uart_resources[] __initdata = { .nr_resources = ARRAY_SIZE(s3c64xx_uart3_resource), }, }; - -/* uart devices */ - -static struct platform_device s3c24xx_uart_device0 = { - .id = 0, -}; - -static struct platform_device s3c24xx_uart_device1 = { - .id = 1, -}; - -static struct platform_device s3c24xx_uart_device2 = { - .id = 2, -}; - -static struct platform_device s3c24xx_uart_device3 = { - .id = 3, -}; - -struct platform_device *s3c24xx_uart_src[4] = { - &s3c24xx_uart_device0, - &s3c24xx_uart_device1, - &s3c24xx_uart_device2, - &s3c24xx_uart_device3, -}; - -struct platform_device *s3c24xx_uart_devs[4] = { -}; - diff --git a/arch/arm/plat-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c index d554b936fcf..b62bdf18dca 100644 --- a/arch/arm/plat-s3c64xx/dma.c +++ b/arch/arm/mach-s3c64xx/dma.c @@ -27,8 +27,7 @@ #include <mach/map.h> #include <mach/irqs.h> -#include <plat/dma-plat.h> -#include <plat/regs-sys.h> +#include <mach/regs-sys.h> #include <asm/hardware/pl080.h> diff --git a/arch/arm/plat-s3c64xx/gpiolib.c b/arch/arm/mach-s3c64xx/gpiolib.c index 77856045727..66e6794481d 100644 --- a/arch/arm/plat-s3c64xx/gpiolib.c +++ b/arch/arm/mach-s3c64xx/gpiolib.c @@ -18,11 +18,11 @@ #include <mach/map.h> #include <mach/gpio.h> -#include <mach/gpio-core.h> +#include <plat/gpio-core.h> #include <plat/gpio-cfg.h> #include <plat/gpio-cfg-helpers.h> -#include <plat/regs-gpio.h> +#include <mach/regs-gpio.h> /* GPIO bank summary: * @@ -49,150 +49,6 @@ * [2] BANK has two control registers, GPxCON0 and GPxCON1 */ -#define OFF_GPCON (0x00) -#define OFF_GPDAT (0x04) - -#define con_4bit_shift(__off) ((__off) * 4) - -#if 1 -#define gpio_dbg(x...) do { } while(0) -#else -#define gpio_dbg(x...) printk(KERN_DEBUG x) -#endif - -/* The s3c64xx_gpiolib_4bit routines are to control the gpio banks where - * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the - * following example: - * - * base + 0x00: Control register, 4 bits per gpio - * gpio n: 4 bits starting at (4*n) - * 0000 = input, 0001 = output, others mean special-function - * base + 0x04: Data register, 1 bit per gpio - * bit n: data bit n - * - * Note, since the data register is one bit per gpio and is at base + 0x4 - * we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of - * the output. -*/ - -static int s3c64xx_gpiolib_4bit_input(struct gpio_chip *chip, unsigned offset) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - unsigned long con; - - con = __raw_readl(base + OFF_GPCON); - con &= ~(0xf << con_4bit_shift(offset)); - __raw_writel(con, base + OFF_GPCON); - - gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con); - - return 0; -} - -static int s3c64xx_gpiolib_4bit_output(struct gpio_chip *chip, - unsigned offset, int value) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - unsigned long con; - unsigned long dat; - - con = __raw_readl(base + OFF_GPCON); - con &= ~(0xf << con_4bit_shift(offset)); - con |= 0x1 << con_4bit_shift(offset); - - dat = __raw_readl(base + OFF_GPDAT); - if (value) - dat |= 1 << offset; - else - dat &= ~(1 << offset); - - __raw_writel(dat, base + OFF_GPDAT); - __raw_writel(con, base + OFF_GPCON); - __raw_writel(dat, base + OFF_GPDAT); - - gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat); - - return 0; -} - -/* The next set of routines are for the case where the GPIO configuration - * registers are 4 bits per GPIO but there is more than one register (the - * bank has more than 8 GPIOs. - * - * This case is the similar to the 4 bit case, but the registers are as - * follows: - * - * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs) - * gpio n: 4 bits starting at (4*n) - * 0000 = input, 0001 = output, others mean special-function - * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs) - * gpio n: 4 bits starting at (4*n) - * 0000 = input, 0001 = output, others mean special-function - * base + 0x08: Data register, 1 bit per gpio - * bit n: data bit n - * - * To allow us to use the s3c_gpiolib_get and s3c_gpiolib_set routines we - * store the 'base + 0x4' address so that these routines see the data - * register at ourchip->base + 0x04. -*/ - -static int s3c64xx_gpiolib_4bit2_input(struct gpio_chip *chip, unsigned offset) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - void __iomem *regcon = base; - unsigned long con; - - if (offset > 7) - offset -= 8; - else - regcon -= 4; - - con = __raw_readl(regcon); - con &= ~(0xf << con_4bit_shift(offset)); - __raw_writel(con, regcon); - - gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con); - - return 0; - -} - -static int s3c64xx_gpiolib_4bit2_output(struct gpio_chip *chip, - unsigned offset, int value) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - void __iomem *regcon = base; - unsigned long con; - unsigned long dat; - - if (offset > 7) - offset -= 8; - else - regcon -= 4; - - con = __raw_readl(regcon); - con &= ~(0xf << con_4bit_shift(offset)); - con |= 0x1 << con_4bit_shift(offset); - - dat = __raw_readl(base + OFF_GPDAT); - if (value) - dat |= 1 << offset; - else - dat &= ~(1 << offset); - - __raw_writel(dat, base + OFF_GPDAT); - __raw_writel(con, regcon); - __raw_writel(dat, base + OFF_GPDAT); - - gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat); - - return 0; -} - static struct s3c_gpio_cfg gpio_4bit_cfg_noint = { .set_config = s3c_gpio_setcfg_s3c64xx_4bit, .set_pull = s3c_gpio_setpull_updown, @@ -399,20 +255,6 @@ static struct s3c_gpio_chip gpio_2bit[] = { }, }; -static __init void s3c64xx_gpiolib_add_4bit(struct s3c_gpio_chip *chip) -{ - chip->chip.direction_input = s3c64xx_gpiolib_4bit_input; - chip->chip.direction_output = s3c64xx_gpiolib_4bit_output; - chip->pm = __gpio_pm(&s3c_gpio_pm_4bit); -} - -static __init void s3c64xx_gpiolib_add_4bit2(struct s3c_gpio_chip *chip) -{ - chip->chip.direction_input = s3c64xx_gpiolib_4bit2_input; - chip->chip.direction_output = s3c64xx_gpiolib_4bit2_output; - chip->pm = __gpio_pm(&s3c_gpio_pm_4bit); -} - static __init void s3c64xx_gpiolib_add_2bit(struct s3c_gpio_chip *chip) { chip->pm = __gpio_pm(&s3c_gpio_pm_2bit); @@ -432,10 +274,10 @@ static __init void s3c64xx_gpiolib_add(struct s3c_gpio_chip *chips, static __init int s3c64xx_gpiolib_init(void) { s3c64xx_gpiolib_add(gpio_4bit, ARRAY_SIZE(gpio_4bit), - s3c64xx_gpiolib_add_4bit); + samsung_gpiolib_add_4bit); s3c64xx_gpiolib_add(gpio_4bit2, ARRAY_SIZE(gpio_4bit2), - s3c64xx_gpiolib_add_4bit2); + samsung_gpiolib_add_4bit2); s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit), s3c64xx_gpiolib_add_2bit); diff --git a/arch/arm/mach-s3c6400/include/mach/debug-macro.S b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S index 5c88875d6a3..b18ac5266df 100644 --- a/arch/arm/mach-s3c6400/include/mach/debug-macro.S +++ b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S @@ -21,7 +21,7 @@ * aligned and add in the offset when we load the value here. */ - .macro addruart, rx, tmp + .macro addruart, rx mrc p15, 0, \rx, c1, c0 tst \rx, #1 ldreq \rx, = S3C_PA_UART diff --git a/arch/arm/plat-s3c64xx/include/plat/dma-plat.h b/arch/arm/mach-s3c64xx/include/mach/dma.h index 8f76a1e474d..0a5d9268a23 100644 --- a/arch/arm/plat-s3c64xx/include/plat/dma-plat.h +++ b/arch/arm/mach-s3c64xx/include/mach/dma.h @@ -1,16 +1,71 @@ -/* linux/arch/arm/plat-s3c64xx/include/plat/dma-plat.h +/* linux/arch/arm/mach-s3c6400/include/mach/dma.h * - * Copyright 2009 Openmoko, Inc. - * Copyright 2009 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ * - * S3C64XX DMA core - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + * S3C6400 - DMA support + */ + +#ifndef __ASM_ARCH_DMA_H +#define __ASM_ARCH_DMA_H __FILE__ + +#define S3C_DMA_CHANNELS (16) + +/* see mach-s3c2410/dma.h for notes on dma channel numbers */ + +/* Note, for the S3C64XX architecture we keep the DMACH_ + * defines in the order they are allocated to [S]DMA0/[S]DMA1 + * so that is easy to do DHACH_ -> DMA controller conversion + */ +enum dma_ch { + /* DMA0/SDMA0 */ + DMACH_UART0 = 0, + DMACH_UART0_SRC2, + DMACH_UART1, + DMACH_UART1_SRC2, + DMACH_UART2, + DMACH_UART2_SRC2, + DMACH_UART3, + DMACH_UART3_SRC2, + DMACH_PCM0_TX, + DMACH_PCM0_RX, + DMACH_I2S0_OUT, + DMACH_I2S0_IN, + DMACH_SPI0_TX, + DMACH_SPI0_RX, + DMACH_HSI_I2SV40_TX, + DMACH_HSI_I2SV40_RX, + + /* DMA1/SDMA1 */ + DMACH_PCM1_TX = 16, + DMACH_PCM1_RX, + DMACH_I2S1_OUT, + DMACH_I2S1_IN, + DMACH_SPI1_TX, + DMACH_SPI1_RX, + DMACH_AC97_PCMOUT, + DMACH_AC97_PCMIN, + DMACH_AC97_MICIN, + DMACH_PWM, + DMACH_IRDA, + DMACH_EXTERNAL, + DMACH_RES1, + DMACH_RES2, + DMACH_SECURITY_RX, /* SDMA1 only */ + DMACH_SECURITY_TX, /* SDMA1 only */ + DMACH_MAX /* the end */ +}; + +static __inline__ bool s3c_dma_has_circular(void) +{ + return true; +} + +#define S3C2410_DMAF_CIRCULAR (1 << 0) + +#include <plat/dma.h> #define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */ @@ -68,3 +123,5 @@ struct s3c2410_dma_chan { }; #include <plat/dma-core.h> + +#endif /* __ASM_ARCH_IRQ_H */ diff --git a/arch/arm/mach-s3c64xx/include/mach/entry-macro.S b/arch/arm/mach-s3c64xx/include/mach/entry-macro.S new file mode 100644 index 00000000000..dd362604dcc --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/entry-macro.S @@ -0,0 +1,18 @@ +/* arch/arm/mach-s3c6400/include/mach/entry-macro.S + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * Low-level IRQ helper macros for the Samsung S3C64XX series + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. +*/ + +#include <mach/map.h> +#include <mach/irqs.h> + +#include <asm/entry-macro-vic2.S> diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-a.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h index 9aa0e427d11..34212e1a7e8 100644 --- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-a.h +++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-a.h +/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h * * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-b.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h index 3933adb4d50..7232c037e64 100644 --- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-b.h +++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-b.h +/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h * * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h index e22b49f4f98..db189ab1639 100644 --- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h +++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h +/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h * * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-d.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h index 6fe4a49c26f..1a01cee7aca 100644 --- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-d.h +++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-d.h +/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h * * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-e.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h index 7fcf3d8e0a4..f057adb627d 100644 --- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-e.h +++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-e.h +/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h * * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-f.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h index f3faff974a1..62ab8f5e783 100644 --- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-f.h +++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-f.h +/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h * * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-g.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h index 35bbd2378e5..b94954af159 100644 --- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-g.h +++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-g.h +/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h * * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h index 2ba1767512d..5d75aaad865 100644 --- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h +++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h +/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h * * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-i.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h index ce9ebe33556..4ceaa6098bc 100644 --- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-i.h +++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-i.h +/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h * * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-j.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h index 21a906299d3..6f25cd079a4 100644 --- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-j.h +++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-j.h +/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h * * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-n.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h index 569e7612088..d0aeda1cd9d 100644 --- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-n.h +++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-n.h +/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h * * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-o.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h index b09e12954b5..21868fa102d 100644 --- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-o.h +++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-o.h +/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h * * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-p.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h index 92f00517926..46bcfb63b8d 100644 --- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-p.h +++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-p.h +/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h * * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-q.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h index 565e60aaee4..1712223487b 100644 --- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-q.h +++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-q.h +/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h * * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics diff --git a/arch/arm/mach-s3c6400/include/mach/gpio.h b/arch/arm/mach-s3c64xx/include/mach/gpio.h index e8e35e8fe73..0d46e994048 100644 --- a/arch/arm/mach-s3c6400/include/mach/gpio.h +++ b/arch/arm/mach-s3c64xx/include/mach/gpio.h @@ -91,6 +91,10 @@ enum s3c_gpio_number { #define S3C_GPIO_END S3C64XX_GPIO_END /* define the number of gpios we need to the one after the GPQ() range */ -#define ARCH_NR_GPIOS (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1) +#define GPIO_BOARD_START (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1) + +#define BOARD_NR_GPIOS 16 + +#define ARCH_NR_GPIOS (GPIO_BOARD_START + BOARD_NR_GPIOS) #include <asm-generic/gpio.h> diff --git a/arch/arm/mach-s3c6400/include/mach/hardware.h b/arch/arm/mach-s3c64xx/include/mach/hardware.h index 862d033e57a..862d033e57a 100644 --- a/arch/arm/mach-s3c6400/include/mach/hardware.h +++ b/arch/arm/mach-s3c64xx/include/mach/hardware.h diff --git a/arch/arm/mach-s3c64xx/include/mach/io.h b/arch/arm/mach-s3c64xx/include/mach/io.h new file mode 100644 index 00000000000..de5716dbbd6 --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/io.h @@ -0,0 +1,18 @@ +/* arch/arm/mach-s3c64xxinclude/mach/io.h + * + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben-linux@fluff.org> + * + * Default IO routines for S3C64XX based + */ + +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +/* No current ISA/PCI bus support. */ +#define __io(a) __typesafe_io(a) +#define __mem_pci(a) (a) + +#define IO_SPACE_LIMIT (0xFFFFFFFF) + +#endif diff --git a/arch/arm/plat-s3c64xx/include/plat/irqs.h b/arch/arm/mach-s3c64xx/include/mach/irqs.h index 7956fd3bb19..e9ab4ac0b9a 100644 --- a/arch/arm/plat-s3c64xx/include/plat/irqs.h +++ b/arch/arm/mach-s3c64xx/include/mach/irqs.h @@ -1,15 +1,15 @@ -/* linux/arch/arm/plat-s3c64xx/include/mach/irqs.h +/* linux/arch/arm/mach-s3c64xx/include/mach/irqs.h * * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * http://armlinux.simtec.co.uk/ * - * S3C64XX - Common IRQ support + * S3C64XX - IRQ support */ -#ifndef __ASM_PLAT_S3C64XX_IRQS_H -#define __ASM_PLAT_S3C64XX_IRQS_H __FILE__ +#ifndef __ASM_MACH_S3C64XX_IRQS_H +#define __ASM_MACH_S3C64XX_IRQS_H __FILE__ /* we keep the first set of CPU IRQs out of the range of * the ISA space, so that the PC104 has them to itself @@ -24,8 +24,8 @@ #define S3C_IRQ(x) ((x) + S3C_IRQ_OFFSET) -#define S3C_VIC0_BASE S3C_IRQ(0) -#define S3C_VIC1_BASE S3C_IRQ(32) +#define IRQ_VIC0_BASE S3C_IRQ(0) +#define IRQ_VIC1_BASE S3C_IRQ(32) /* UART interrupts, each UART has 4 intterupts per channel so * use the space between the ISA and S3C main interrupts. Note, these @@ -59,8 +59,8 @@ /* VIC based IRQs */ -#define S3C64XX_IRQ_VIC0(x) (S3C_VIC0_BASE + (x)) -#define S3C64XX_IRQ_VIC1(x) (S3C_VIC1_BASE + (x)) +#define S3C64XX_IRQ_VIC0(x) (IRQ_VIC0_BASE + (x)) +#define S3C64XX_IRQ_VIC1(x) (IRQ_VIC1_BASE + (x)) /* VIC0 */ @@ -198,7 +198,13 @@ * interrupt controllers). */ #define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1) +#ifdef CONFIG_SMDK6410_WM1190_EV1 +#define IRQ_BOARD_NR 64 +#elif defined(CONFIG_SMDK6410_WM1192_EV1) +#define IRQ_BOARD_NR 64 +#else #define IRQ_BOARD_NR 16 +#endif #define IRQ_BOARD_END (IRQ_BOARD_START + IRQ_BOARD_NR) @@ -206,5 +212,5 @@ #define NR_IRQS (IRQ_BOARD_END + 1) -#endif /* __ASM_PLAT_S3C64XX_IRQS_H */ +#endif /* __ASM_MACH_S3C64XX_IRQS_H */ diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c64xx/include/mach/map.h index 106ee13581e..801c1c0f3a9 100644 --- a/arch/arm/mach-s3c6400/include/mach/map.h +++ b/arch/arm/mach-s3c64xx/include/mach/map.h @@ -17,6 +17,18 @@ #include <plat/map-base.h> +/* + * Post-mux Chip Select Regions Xm0CSn_ + * These may be used by SROM, NAND or CF depending on settings + */ + +#define S3C64XX_PA_XM0CSN0 (0x10000000) +#define S3C64XX_PA_XM0CSN1 (0x18000000) +#define S3C64XX_PA_XM0CSN2 (0x20000000) +#define S3C64XX_PA_XM0CSN3 (0x28000000) +#define S3C64XX_PA_XM0CSN4 (0x30000000) +#define S3C64XX_PA_XM0CSN5 (0x38000000) + /* HSMMC units */ #define S3C64XX_PA_HSMMC(x) (0x7C200000 + ((x) * 0x100000)) #define S3C64XX_PA_HSMMC0 S3C64XX_PA_HSMMC(0) @@ -38,16 +50,22 @@ #define S3C_VA_UART2 S3C_VA_UARTx(2) #define S3C_VA_UART3 S3C_VA_UARTx(3) +#define S3C64XX_PA_SROM (0x70000000) + #define S3C64XX_PA_NAND (0x70200000) #define S3C64XX_PA_FB (0x77100000) #define S3C64XX_PA_USB_HSOTG (0x7C000000) #define S3C64XX_PA_WATCHDOG (0x7E004000) +#define S3C64XX_PA_RTC (0x7E005000) +#define S3C64XX_PA_ADC (0x7E00B000) #define S3C64XX_PA_SYSCON (0x7E00F000) #define S3C64XX_PA_AC97 (0x7F001000) #define S3C64XX_PA_IIS0 (0x7F002000) #define S3C64XX_PA_IIS1 (0x7F003000) #define S3C64XX_PA_TIMER (0x7F006000) #define S3C64XX_PA_IIC0 (0x7F004000) +#define S3C64XX_PA_SPI0 (0x7F00B000) +#define S3C64XX_PA_SPI1 (0x7F00C000) #define S3C64XX_PA_PCM0 (0x7F009000) #define S3C64XX_PA_PCM1 (0x7F00A000) #define S3C64XX_PA_IISV4 (0x7F00D000) @@ -70,8 +88,8 @@ #define S3C64XX_VA_USB_HSPHY S3C_ADDR_CPU(0x00200000) /* place VICs close together */ -#define S3C_VA_VIC0 (S3C_VA_IRQ + 0x00) -#define S3C_VA_VIC1 (S3C_VA_IRQ + 0x10000) +#define VA_VIC0 (S3C_VA_IRQ + 0x00) +#define VA_VIC1 (S3C_VA_IRQ + 0x10000) /* compatibiltiy defines. */ #define S3C_PA_TIMER S3C64XX_PA_TIMER diff --git a/arch/arm/mach-s3c6400/include/mach/memory.h b/arch/arm/mach-s3c64xx/include/mach/memory.h index a3ac84a6548..a3ac84a6548 100644 --- a/arch/arm/mach-s3c6400/include/mach/memory.h +++ b/arch/arm/mach-s3c64xx/include/mach/memory.h diff --git a/arch/arm/plat-s3c64xx/include/plat/pll.h b/arch/arm/mach-s3c64xx/include/mach/pll.h index 90bbd72fdc4..90bbd72fdc4 100644 --- a/arch/arm/plat-s3c64xx/include/plat/pll.h +++ b/arch/arm/mach-s3c64xx/include/mach/pll.h diff --git a/arch/arm/plat-s3c64xx/include/plat/pm-core.h b/arch/arm/mach-s3c64xx/include/mach/pm-core.h index d347de3ba0d..1e9f20f0bb7 100644 --- a/arch/arm/plat-s3c64xx/include/plat/pm-core.h +++ b/arch/arm/mach-s3c64xx/include/mach/pm-core.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s3c64xx/include/plat/pm-core.h +/* linux/arch/arm/mach-s3c64xx/include/mach/pm-core.h * * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics @@ -12,7 +12,7 @@ * published by the Free Software Foundation. */ -#include <plat/regs-gpio.h> +#include <mach/regs-gpio.h> static inline void s3c_pm_debug_init_uart(void) { diff --git a/arch/arm/mach-s3c6400/include/mach/pwm-clock.h b/arch/arm/mach-s3c64xx/include/mach/pwm-clock.h index b25bedee0d5..b25bedee0d5 100644 --- a/arch/arm/mach-s3c6400/include/mach/pwm-clock.h +++ b/arch/arm/mach-s3c64xx/include/mach/pwm-clock.h diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h index ff46e7fa957..3ef62741e5d 100644 --- a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h +++ b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h @@ -35,14 +35,6 @@ #define S3C_MEM0_GATE S3C_CLKREG(0x3C) /* CLKDIV0 */ -#define S3C6400_CLKDIV0_MFC_MASK (0xf << 28) -#define S3C6400_CLKDIV0_MFC_SHIFT (28) -#define S3C6400_CLKDIV0_JPEG_MASK (0xf << 24) -#define S3C6400_CLKDIV0_JPEG_SHIFT (24) -#define S3C6400_CLKDIV0_CAM_MASK (0xf << 20) -#define S3C6400_CLKDIV0_CAM_SHIFT (20) -#define S3C6400_CLKDIV0_SECURITY_MASK (0x3 << 18) -#define S3C6400_CLKDIV0_SECURITY_SHIFT (18) #define S3C6400_CLKDIV0_PCLK_MASK (0xf << 12) #define S3C6400_CLKDIV0_PCLK_SHIFT (12) #define S3C6400_CLKDIV0_HCLK2_MASK (0x7 << 9) @@ -51,42 +43,11 @@ #define S3C6400_CLKDIV0_HCLK_SHIFT (8) #define S3C6400_CLKDIV0_MPLL_MASK (0x1 << 4) #define S3C6400_CLKDIV0_MPLL_SHIFT (4) + #define S3C6400_CLKDIV0_ARM_MASK (0x7 << 0) #define S3C6410_CLKDIV0_ARM_MASK (0xf << 0) #define S3C6400_CLKDIV0_ARM_SHIFT (0) -/* CLKDIV1 */ -#define S3C6410_CLKDIV1_FIMC_MASK (0xf << 24) -#define S3C6410_CLKDIV1_FIMC_SHIFT (24) -#define S3C6400_CLKDIV1_UHOST_MASK (0xf << 20) -#define S3C6400_CLKDIV1_UHOST_SHIFT (20) -#define S3C6400_CLKDIV1_SCALER_MASK (0xf << 16) -#define S3C6400_CLKDIV1_SCALER_SHIFT (16) -#define S3C6400_CLKDIV1_LCD_MASK (0xf << 12) -#define S3C6400_CLKDIV1_LCD_SHIFT (12) -#define S3C6400_CLKDIV1_MMC2_MASK (0xf << 8) -#define S3C6400_CLKDIV1_MMC2_SHIFT (8) -#define S3C6400_CLKDIV1_MMC1_MASK (0xf << 4) -#define S3C6400_CLKDIV1_MMC1_SHIFT (4) -#define S3C6400_CLKDIV1_MMC0_MASK (0xf << 0) -#define S3C6400_CLKDIV1_MMC0_SHIFT (0) - -/* CLKDIV2 */ -#define S3C6410_CLKDIV2_AUDIO2_MASK (0xf << 24) -#define S3C6410_CLKDIV2_AUDIO2_SHIFT (24) -#define S3C6400_CLKDIV2_IRDA_MASK (0xf << 20) -#define S3C6400_CLKDIV2_IRDA_SHIFT (20) -#define S3C6400_CLKDIV2_UART_MASK (0xf << 16) -#define S3C6400_CLKDIV2_UART_SHIFT (16) -#define S3C6400_CLKDIV2_AUDIO1_MASK (0xf << 12) -#define S3C6400_CLKDIV2_AUDIO1_SHIFT (12) -#define S3C6400_CLKDIV2_AUDIO0_MASK (0xf << 8) -#define S3C6400_CLKDIV2_AUDIO0_SHIFT (8) -#define S3C6400_CLKDIV2_SPI1_MASK (0xf << 4) -#define S3C6400_CLKDIV2_SPI1_SHIFT (4) -#define S3C6400_CLKDIV2_SPI0_MASK (0xf << 0) -#define S3C6400_CLKDIV2_SPI0_SHIFT (0) - /* HCLK GATE Registers */ #define S3C_CLKCON_HCLK_3DSE (1<<31) #define S3C_CLKCON_HCLK_UHOST (1<<29) @@ -192,34 +153,4 @@ #define S3C6400_CLKSRC_EPLL_MOUT_SHIFT (2) #define S3C6400_CLKSRC_MFC (1 << 4) -#define S3C6410_CLKSRC_TV27_MASK (0x1 << 31) -#define S3C6410_CLKSRC_TV27_SHIFT (31) -#define S3C6410_CLKSRC_DAC27_MASK (0x1 << 30) -#define S3C6410_CLKSRC_DAC27_SHIFT (30) -#define S3C6400_CLKSRC_SCALER_MASK (0x3 << 28) -#define S3C6400_CLKSRC_SCALER_SHIFT (28) -#define S3C6400_CLKSRC_LCD_MASK (0x3 << 26) -#define S3C6400_CLKSRC_LCD_SHIFT (26) -#define S3C6400_CLKSRC_IRDA_MASK (0x3 << 24) -#define S3C6400_CLKSRC_IRDA_SHIFT (24) -#define S3C6400_CLKSRC_MMC2_MASK (0x3 << 22) -#define S3C6400_CLKSRC_MMC2_SHIFT (22) -#define S3C6400_CLKSRC_MMC1_MASK (0x3 << 20) -#define S3C6400_CLKSRC_MMC1_SHIFT (20) -#define S3C6400_CLKSRC_MMC0_MASK (0x3 << 18) -#define S3C6400_CLKSRC_MMC0_SHIFT (18) -#define S3C6400_CLKSRC_SPI1_MASK (0x3 << 16) -#define S3C6400_CLKSRC_SPI1_SHIFT (16) -#define S3C6400_CLKSRC_SPI0_MASK (0x3 << 14) -#define S3C6400_CLKSRC_SPI0_SHIFT (14) -#define S3C6400_CLKSRC_UART_MASK (0x1 << 13) -#define S3C6400_CLKSRC_UART_SHIFT (13) -#define S3C6400_CLKSRC_AUDIO1_MASK (0x7 << 10) -#define S3C6400_CLKSRC_AUDIO1_SHIFT (10) -#define S3C6400_CLKSRC_AUDIO0_MASK (0x7 << 7) -#define S3C6400_CLKSRC_AUDIO0_SHIFT (7) -#define S3C6400_CLKSRC_UHOST_MASK (0x3 << 5) -#define S3C6400_CLKSRC_UHOST_SHIFT (5) - - #endif /* _PLAT_REGS_CLOCK_H */ diff --git a/arch/arm/mach-s3c6400/include/mach/regs-fb.h b/arch/arm/mach-s3c64xx/include/mach/regs-fb.h index f56611526c6..f56611526c6 100644 --- a/arch/arm/mach-s3c6400/include/mach/regs-fb.h +++ b/arch/arm/mach-s3c64xx/include/mach/regs-fb.h diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-gpio-memport.h b/arch/arm/mach-s3c64xx/include/mach/regs-gpio-memport.h index 82342f6fd27..82342f6fd27 100644 --- a/arch/arm/plat-s3c64xx/include/plat/regs-gpio-memport.h +++ b/arch/arm/mach-s3c64xx/include/mach/regs-gpio-memport.h diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-gpio.h b/arch/arm/mach-s3c64xx/include/mach/regs-gpio.h index 81f7f6e6832..81f7f6e6832 100644 --- a/arch/arm/plat-s3c64xx/include/plat/regs-gpio.h +++ b/arch/arm/mach-s3c64xx/include/mach/regs-gpio.h diff --git a/arch/arm/mach-s3c6400/include/mach/regs-irq.h b/arch/arm/mach-s3c64xx/include/mach/regs-irq.h index bcce68a0bb7..bcce68a0bb7 100644 --- a/arch/arm/mach-s3c6400/include/mach/regs-irq.h +++ b/arch/arm/mach-s3c64xx/include/mach/regs-irq.h diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-modem.h b/arch/arm/mach-s3c64xx/include/mach/regs-modem.h index 49f7759dedf..49f7759dedf 100644 --- a/arch/arm/plat-s3c64xx/include/plat/regs-modem.h +++ b/arch/arm/mach-s3c64xx/include/mach/regs-modem.h diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-srom.h b/arch/arm/mach-s3c64xx/include/mach/regs-srom.h new file mode 100644 index 00000000000..756731b3629 --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/regs-srom.h @@ -0,0 +1,59 @@ +/* arch/arm/plat-s3c64xx/include/plat/regs-srom.h + * + * Copyright 2009 Andy Green <andy@warmcat.com> + * + * S3C64XX SROM definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __PLAT_REGS_SROM_H +#define __PLAT_REGS_SROM_H __FILE__ + +#define S3C64XX_SROMREG(x) (S3C_VA_MEM + (x)) + +#define S3C64XX_SROM_BW S3C64XX_SROMREG(0) +#define S3C64XX_SROM_BC0 S3C64XX_SROMREG(4) +#define S3C64XX_SROM_BC1 S3C64XX_SROMREG(8) +#define S3C64XX_SROM_BC2 S3C64XX_SROMREG(0xc) +#define S3C64XX_SROM_BC3 S3C64XX_SROMREG(0x10) +#define S3C64XX_SROM_BC4 S3C64XX_SROMREG(0x14) +#define S3C64XX_SROM_BC5 S3C64XX_SROMREG(0x18) + +/* + * one register BW holds 5 x 4-bit packed settings for NCS0 - NCS4 + */ + +#define S3C64XX_SROM_BW__DATAWIDTH__SHIFT 0 +#define S3C64XX_SROM_BW__WAITENABLE__SHIFT 2 +#define S3C64XX_SROM_BW__BYTEENABLE__SHIFT 3 +#define S3C64XX_SROM_BW__CS_MASK 0xf + +#define S3C64XX_SROM_BW__NCS0__SHIFT 0 +#define S3C64XX_SROM_BW__NCS1__SHIFT 4 +#define S3C64XX_SROM_BW__NCS2__SHIFT 8 +#define S3C64XX_SROM_BW__NCS3__SHIFT 0xc +#define S3C64XX_SROM_BW__NCS4__SHIFT 0x10 + +/* + * applies to same to BCS0 - BCS4 + */ + +#define S3C64XX_SROM_BCX__PMC__SHIFT 0 +#define S3C64XX_SROM_BCX__PMC__MASK 3 +#define S3C64XX_SROM_BCX__TACP__SHIFT 4 +#define S3C64XX_SROM_BCX__TACP__MASK 0xf +#define S3C64XX_SROM_BCX__TCAH__SHIFT 8 +#define S3C64XX_SROM_BCX__TCAH__MASK 0xf +#define S3C64XX_SROM_BCX__TCOH__SHIFT 12 +#define S3C64XX_SROM_BCX__TCOH__MASK 0xf +#define S3C64XX_SROM_BCX__TACC__SHIFT 16 +#define S3C64XX_SROM_BCX__TACC__MASK 0x1f +#define S3C64XX_SROM_BCX__TCOS__SHIFT 24 +#define S3C64XX_SROM_BCX__TCOS__MASK 0xf +#define S3C64XX_SROM_BCX__TACS__SHIFT 28 +#define S3C64XX_SROM_BCX__TACS__MASK 0xf + +#endif /* _PLAT_REGS_SROM_H */ diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-sys.h b/arch/arm/mach-s3c64xx/include/mach/regs-sys.h index 69b78d9f83b..69b78d9f83b 100644 --- a/arch/arm/plat-s3c64xx/include/plat/regs-sys.h +++ b/arch/arm/mach-s3c64xx/include/mach/regs-sys.h diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-syscon-power.h b/arch/arm/mach-s3c64xx/include/mach/regs-syscon-power.h index 270d96ac970..270d96ac970 100644 --- a/arch/arm/plat-s3c64xx/include/plat/regs-syscon-power.h +++ b/arch/arm/mach-s3c64xx/include/mach/regs-syscon-power.h diff --git a/arch/arm/plat-s3c64xx/include/plat/s3c6400.h b/arch/arm/mach-s3c64xx/include/mach/s3c6400.h index 11f2e1e119b..f86958d0535 100644 --- a/arch/arm/plat-s3c64xx/include/plat/s3c6400.h +++ b/arch/arm/mach-s3c64xx/include/mach/s3c6400.h @@ -1,4 +1,4 @@ -/* arch/arm/plat-s3c64xx/include/plat/s3c6400.h +/* arch/arm/mach-s3c64xx/include/macht/s3c6400.h * * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics @@ -15,9 +15,10 @@ /* Common init code for S3C6400 related SoCs */ extern void s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); -extern void s3c6400_register_clocks(unsigned armclk_divlimit); extern void s3c6400_setup_clocks(void); +extern void s3c64xx_register_clocks(unsigned long xtal, unsigned armclk_limit); + #ifdef CONFIG_CPU_S3C6400 extern int s3c6400_init(void); @@ -33,4 +34,3 @@ extern void s3c6400_init_clocks(int xtal); #define s3c6400_map_io NULL #define s3c6400_init NULL #endif - diff --git a/arch/arm/plat-s3c64xx/include/plat/s3c6410.h b/arch/arm/mach-s3c64xx/include/mach/s3c6410.h index 50dcdd6f680..24f1141ffcb 100644 --- a/arch/arm/plat-s3c64xx/include/plat/s3c6410.h +++ b/arch/arm/mach-s3c64xx/include/mach/s3c6410.h @@ -1,4 +1,4 @@ -/* arch/arm/plat-s3c64xx/include/plat/s3c6410.h +/* arch/arm/mach-s3c64xx/include/mach/s3c6410.h * * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics diff --git a/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h b/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h new file mode 100644 index 00000000000..9d0c43b4b68 --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h @@ -0,0 +1,18 @@ +/* linux/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h + * + * Copyright (C) 2009 Samsung Electronics Ltd. + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __S3C64XX_PLAT_SPI_CLKS_H +#define __S3C64XX_PLAT_SPI_CLKS_H __FILE__ + +#define S3C64XX_SPI_SRCCLK_PCLK 0 +#define S3C64XX_SPI_SRCCLK_SPIBUS 1 +#define S3C64XX_SPI_SRCCLK_48M 2 + +#endif /* __S3C64XX_PLAT_SPI_CLKS_H */ diff --git a/arch/arm/mach-s3c6400/include/mach/system.h b/arch/arm/mach-s3c64xx/include/mach/system.h index 2e58cb7a714..2e58cb7a714 100644 --- a/arch/arm/mach-s3c6400/include/mach/system.h +++ b/arch/arm/mach-s3c64xx/include/mach/system.h diff --git a/arch/arm/mach-s3c6400/include/mach/tick.h b/arch/arm/mach-s3c64xx/include/mach/tick.h index d9c0dc7014e..ebe18a9469b 100644 --- a/arch/arm/mach-s3c6400/include/mach/tick.h +++ b/arch/arm/mach-s3c64xx/include/mach/tick.h @@ -20,7 +20,7 @@ */ static inline u32 s3c24xx_ostimer_pending(void) { - u32 pend = __raw_readl(S3C_VA_VIC0 + VIC_RAW_STATUS); + u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS); return pend & 1 << (IRQ_TIMER4_VIC - S3C64XX_IRQ_VIC0(0)); } diff --git a/arch/arm/mach-s3c64xx/include/mach/timex.h b/arch/arm/mach-s3c64xx/include/mach/timex.h new file mode 100644 index 00000000000..fb2e8cd4082 --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/timex.h @@ -0,0 +1,24 @@ +/* arch/arm/mach-s3c64xx/include/mach/timex.h + * + * Copyright (c) 2003-2005 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C6400 - time parameters + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_TIMEX_H +#define __ASM_ARCH_TIMEX_H + +/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it + * a variable is useless. It seems as long as we make our timers an + * exact multiple of HZ, any value that makes a 1->1 correspondence + * for the time conversion functions to/from jiffies is acceptable. +*/ + +#define CLOCK_TICK_RATE 12000000 + +#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-s3c6400/include/mach/uncompress.h b/arch/arm/mach-s3c64xx/include/mach/uncompress.h index c6a82a20bf2..c6a82a20bf2 100644 --- a/arch/arm/mach-s3c6400/include/mach/uncompress.h +++ b/arch/arm/mach-s3c64xx/include/mach/uncompress.h diff --git a/arch/arm/mach-s3c64xx/include/mach/vmalloc.h b/arch/arm/mach-s3c64xx/include/mach/vmalloc.h new file mode 100644 index 00000000000..7411ef3711a --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/vmalloc.h @@ -0,0 +1,20 @@ +/* arch/arm/mach-s3c64xx/include/mach/vmalloc.h + * + * from arch/arm/mach-iop3xx/include/mach/vmalloc.h + * + * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk> + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C6400 vmalloc definition +*/ + +#ifndef __ASM_ARCH_VMALLOC_H +#define __ASM_ARCH_VMALLOC_H + +#define VMALLOC_END (0xE0000000) + +#endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/arch/arm/plat-s3c64xx/irq-eint.c b/arch/arm/mach-s3c64xx/irq-eint.c index ebdf183a091..5682d6a7f4a 100644 --- a/arch/arm/plat-s3c64xx/irq-eint.c +++ b/arch/arm/mach-s3c64xx/irq-eint.c @@ -22,7 +22,7 @@ #include <asm/hardware/vic.h> #include <plat/regs-irqtype.h> -#include <plat/regs-gpio.h> +#include <mach/regs-gpio.h> #include <plat/gpio-cfg.h> #include <mach/map.h> diff --git a/arch/arm/plat-s3c64xx/irq-pm.c b/arch/arm/mach-s3c64xx/irq-pm.c index ca523b5d4c1..da1bec64b9d 100644 --- a/arch/arm/plat-s3c64xx/irq-pm.c +++ b/arch/arm/mach-s3c64xx/irq-pm.c @@ -23,7 +23,7 @@ #include <plat/regs-serial.h> #include <plat/regs-timer.h> -#include <plat/regs-gpio.h> +#include <mach/regs-gpio.h> #include <plat/cpu.h> #include <plat/pm.h> diff --git a/arch/arm/mach-s3c64xx/irq.c b/arch/arm/mach-s3c64xx/irq.c new file mode 100644 index 00000000000..67a145d440f --- /dev/null +++ b/arch/arm/mach-s3c64xx/irq.c @@ -0,0 +1,69 @@ +/* arch/arm/plat-s3c64xx/irq.c + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C64XX - Interrupt handling + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/serial_core.h> +#include <linux/irq.h> +#include <linux/io.h> + +#include <asm/hardware/vic.h> + +#include <mach/map.h> +#include <plat/irq-vic-timer.h> +#include <plat/irq-uart.h> +#include <plat/cpu.h> + +static struct s3c_uart_irq uart_irqs[] = { + [0] = { + .regs = S3C_VA_UART0, + .base_irq = IRQ_S3CUART_BASE0, + .parent_irq = IRQ_UART0, + }, + [1] = { + .regs = S3C_VA_UART1, + .base_irq = IRQ_S3CUART_BASE1, + .parent_irq = IRQ_UART1, + }, + [2] = { + .regs = S3C_VA_UART2, + .base_irq = IRQ_S3CUART_BASE2, + .parent_irq = IRQ_UART2, + }, + [3] = { + .regs = S3C_VA_UART3, + .base_irq = IRQ_S3CUART_BASE3, + .parent_irq = IRQ_UART3, + }, +}; + + +void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid) +{ + printk(KERN_DEBUG "%s: initialising interrupts\n", __func__); + + /* initialise the pair of VICs */ + vic_init(VA_VIC0, IRQ_VIC0_BASE, vic0_valid, 0); + vic_init(VA_VIC1, IRQ_VIC1_BASE, vic1_valid, 0); + + /* add the timer sub-irqs */ + + s3c_init_vic_timer_irq(IRQ_TIMER0_VIC, IRQ_TIMER0); + s3c_init_vic_timer_irq(IRQ_TIMER1_VIC, IRQ_TIMER1); + s3c_init_vic_timer_irq(IRQ_TIMER2_VIC, IRQ_TIMER2); + s3c_init_vic_timer_irq(IRQ_TIMER3_VIC, IRQ_TIMER3); + s3c_init_vic_timer_irq(IRQ_TIMER4_VIC, IRQ_TIMER4); + + s3c_init_uart_irqs(uart_irqs, ARRAY_SIZE(uart_irqs)); +} diff --git a/arch/arm/mach-s3c6410/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c index 661cca63de2..4a0bb243d14 100644 --- a/arch/arm/mach-s3c6410/mach-anw6410.c +++ b/arch/arm/mach-s3c64xx/mach-anw6410.c @@ -1,4 +1,4 @@ -/* linux/arch/arm/mach-s3c6410/mach-anw6410.c +/* linux/arch/arm/mach-s3c64xx/mach-anw6410.c * * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics @@ -45,12 +45,12 @@ #include <plat/iic.h> #include <plat/fb.h> -#include <plat/s3c6410.h> +#include <mach/s3c6410.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> -#include <plat/regs-gpio.h> -#include <plat/regs-modem.h> +#include <mach/regs-gpio.h> +#include <mach/regs-modem.h> /* DM9000 */ #define ANW6410_PA_DM9000 (0x18000000) diff --git a/arch/arm/mach-s3c6410/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c index 7619456f2ae..187441a78dd 100644 --- a/arch/arm/mach-s3c6410/mach-hmt.c +++ b/arch/arm/mach-s3c64xx/mach-hmt.c @@ -38,7 +38,7 @@ #include <plat/fb.h> #include <plat/nand.h> -#include <plat/s3c6410.h> +#include <mach/s3c6410.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> @@ -233,7 +233,7 @@ static struct platform_device *hmt_devices[] __initdata = { &s3c_device_i2c0, &s3c_device_nand, &s3c_device_fb, - &s3c_device_usb, + &s3c_device_ohci, &s3c_device_timer[1], &hmt_backlight_device, &hmt_leds_device, diff --git a/arch/arm/mach-s3c6410/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c index 55e9bbfaf68..bf65747ea68 100644 --- a/arch/arm/mach-s3c6410/mach-ncp.c +++ b/arch/arm/mach-s3c64xx/mach-ncp.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-s3c6410/mach-ncp.c + * linux/arch/arm/mach-s3c64xx/mach-ncp.c * * Copyright (C) 2008-2009 Samsung Electronics * @@ -40,7 +40,7 @@ #include <plat/iic.h> #include <plat/fb.h> -#include <plat/s3c6410.h> +#include <mach/s3c6410.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-s3c6400/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c index ab19285389a..f7b18983950 100644 --- a/arch/arm/mach-s3c6400/mach-smdk6400.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c @@ -1,4 +1,4 @@ -/* linux/arch/arm/mach-s3c6400/mach-smdk6400.c +/* linux/arch/arm/mach-s3c64xx/mach-smdk6400.c * * Copyright 2008 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> @@ -31,7 +31,7 @@ #include <plat/regs-serial.h> -#include <plat/s3c6400.h> +#include <mach/s3c6400.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index 8969fe73b83..2d5afd221d7 100644 --- a/arch/arm/mach-s3c6410/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -1,4 +1,4 @@ -/* linux/arch/arm/mach-s3c6410/mach-smdk6410.c +/* linux/arch/arm/mach-s3c64xx/mach-smdk6410.c * * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics @@ -21,6 +21,7 @@ #include <linux/platform_device.h> #include <linux/io.h> #include <linux/i2c.h> +#include <linux/leds.h> #include <linux/fb.h> #include <linux/gpio.h> #include <linux/delay.h> @@ -32,6 +33,11 @@ #include <linux/mfd/wm8350/pmic.h> #endif +#ifdef CONFIG_SMDK6410_WM1192_EV1 +#include <linux/mfd/wm831x/core.h> +#include <linux/mfd/wm831x/pdata.h> +#endif + #include <video/platform_lcd.h> #include <asm/mach/arch.h> @@ -46,14 +52,15 @@ #include <asm/mach-types.h> #include <plat/regs-serial.h> -#include <plat/regs-modem.h> -#include <plat/regs-gpio.h> -#include <plat/regs-sys.h> +#include <mach/regs-modem.h> +#include <mach/regs-gpio.h> +#include <mach/regs-sys.h> +#include <mach/regs-srom.h> #include <plat/iic.h> #include <plat/fb.h> #include <plat/gpio-cfg.h> -#include <plat/s3c6410.h> +#include <mach/s3c6410.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> @@ -154,10 +161,20 @@ static struct s3c_fb_platdata smdk6410_lcd_pdata __initdata = { .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, }; +/* + * Configuring Ethernet on SMDK6410 + * + * Both CS8900A and LAN9115 chips share one chip select mediated by CFG6. + * The constant address below corresponds to nCS1 + * + * 1) Set CFGB2 p3 ON others off, no other CFGB selects "ethernet" + * 2) CFG6 needs to be switched to "LAN9115" side + */ + static struct resource smdk6410_smsc911x_resources[] = { [0] = { - .start = 0x18000000, - .end = 0x18000000 + SZ_64K - 1, + .start = S3C64XX_PA_XM0CSN1, + .end = S3C64XX_PA_XM0CSN1 + SZ_64K - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -235,8 +252,9 @@ static struct platform_device *smdk6410_devices[] __initdata = { &s3c_device_i2c0, &s3c_device_i2c1, &s3c_device_fb, - &s3c_device_usb, + &s3c_device_ohci, &s3c_device_usb_hsotg, + &s3c64xx_device_iisv4, #ifdef CONFIG_REGULATOR &smdk6410_b_pwr_5v, @@ -246,77 +264,124 @@ static struct platform_device *smdk6410_devices[] __initdata = { &smdk6410_smsc911x, }; -#ifdef CONFIG_SMDK6410_WM1190_EV1 -/* S3C64xx internal logic & PLL */ -static struct regulator_init_data wm8350_dcdc1_data = { +#ifdef CONFIG_REGULATOR +/* ARM core */ +static struct regulator_consumer_supply smdk6410_vddarm_consumers[] = { + { + .supply = "vddarm", + } +}; + +/* VDDARM, BUCK1 on J5 */ +static struct regulator_init_data smdk6410_vddarm = { .constraints = { - .name = "PVDD_INT/PVDD_PLL", - .min_uV = 1200000, + .name = "PVDD_ARM", + .min_uV = 1000000, + .max_uV = 1300000, + .always_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + }, + .num_consumer_supplies = ARRAY_SIZE(smdk6410_vddarm_consumers), + .consumer_supplies = smdk6410_vddarm_consumers, +}; + +/* VDD_INT, BUCK2 on J5 */ +static struct regulator_init_data smdk6410_vddint = { + .constraints = { + .name = "PVDD_INT", + .min_uV = 1000000, .max_uV = 1200000, .always_on = 1, - .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, }, }; -/* Memory */ -static struct regulator_init_data wm8350_dcdc3_data = { +/* VDD_HI, LDO3 on J5 */ +static struct regulator_init_data smdk6410_vddhi = { .constraints = { - .name = "PVDD_MEM", - .min_uV = 1800000, - .max_uV = 1800000, + .name = "PVDD_HI", .always_on = 1, - .state_mem = { - .uV = 1800000, - .mode = REGULATOR_MODE_NORMAL, - .enabled = 1, - }, - .initial_state = PM_SUSPEND_MEM, }, }; -/* USB, EXT, PCM, ADC/DAC, USB, MMC */ -static struct regulator_consumer_supply wm8350_dcdc4_consumers[] = { - { - /* WM8580 */ - .supply = "DVDD", - .dev_name = "0-001b", +/* VDD_PLL, LDO2 on J5 */ +static struct regulator_init_data smdk6410_vddpll = { + .constraints = { + .name = "PVDD_PLL", + .always_on = 1, }, }; -static struct regulator_init_data wm8350_dcdc4_data = { +/* VDD_UH_MMC, LDO5 on J5 */ +static struct regulator_init_data smdk6410_vdduh_mmc = { .constraints = { - .name = "PVDD_HI/PVDD_EXT/PVDD_SYS/PVCCM2MTV", - .min_uV = 3000000, - .max_uV = 3000000, + .name = "PVDD_UH/PVDD_MMC", .always_on = 1, }, - .num_consumer_supplies = ARRAY_SIZE(wm8350_dcdc4_consumers), - .consumer_supplies = wm8350_dcdc4_consumers, }; -/* ARM core */ -static struct regulator_consumer_supply dcdc6_consumers[] = { - { - .supply = "vddarm", - } +/* VCCM3BT, LDO8 on J5 */ +static struct regulator_init_data smdk6410_vccmc3bt = { + .constraints = { + .name = "PVCCM3BT", + .always_on = 1, + }, }; -static struct regulator_init_data wm8350_dcdc6_data = { +/* VCCM2MTV, LDO11 on J5 */ +static struct regulator_init_data smdk6410_vccm2mtv = { .constraints = { - .name = "PVDD_ARM", - .min_uV = 1000000, - .max_uV = 1300000, + .name = "PVCCM2MTV", .always_on = 1, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, }, - .num_consumer_supplies = ARRAY_SIZE(dcdc6_consumers), - .consumer_supplies = dcdc6_consumers, }; -/* Alive */ -static struct regulator_init_data wm8350_ldo1_data = { +/* VDD_LCD, LDO12 on J5 */ +static struct regulator_init_data smdk6410_vddlcd = { + .constraints = { + .name = "PVDD_LCD", + .always_on = 1, + }, +}; + +/* VDD_OTGI, LDO9 on J5 */ +static struct regulator_init_data smdk6410_vddotgi = { + .constraints = { + .name = "PVDD_OTGI", + .always_on = 1, + }, +}; + +/* VDD_OTG, LDO14 on J5 */ +static struct regulator_init_data smdk6410_vddotg = { + .constraints = { + .name = "PVDD_OTG", + .always_on = 1, + }, +}; + +/* VDD_ALIVE, LDO15 on J5 */ +static struct regulator_init_data smdk6410_vddalive = { .constraints = { .name = "PVDD_ALIVE", + .always_on = 1, + }, +}; + +/* VDD_AUDIO, VLDO_AUDIO on J5 */ +static struct regulator_init_data smdk6410_vddaudio = { + .constraints = { + .name = "PVDD_AUDIO", + .always_on = 1, + }, +}; +#endif + +#ifdef CONFIG_SMDK6410_WM1190_EV1 +/* S3C64xx internal logic & PLL */ +static struct regulator_init_data wm8350_dcdc1_data = { + .constraints = { + .name = "PVDD_INT/PVDD_PLL", .min_uV = 1200000, .max_uV = 1200000, .always_on = 1, @@ -324,24 +389,40 @@ static struct regulator_init_data wm8350_ldo1_data = { }, }; -/* OTG */ -static struct regulator_init_data wm8350_ldo2_data = { +/* Memory */ +static struct regulator_init_data wm8350_dcdc3_data = { .constraints = { - .name = "PVDD_OTG", - .min_uV = 3300000, - .max_uV = 3300000, + .name = "PVDD_MEM", + .min_uV = 1800000, + .max_uV = 1800000, .always_on = 1, + .state_mem = { + .uV = 1800000, + .mode = REGULATOR_MODE_NORMAL, + .enabled = 1, + }, + .initial_state = PM_SUSPEND_MEM, }, }; -/* LCD */ -static struct regulator_init_data wm8350_ldo3_data = { +/* USB, EXT, PCM, ADC/DAC, USB, MMC */ +static struct regulator_consumer_supply wm8350_dcdc4_consumers[] = { + { + /* WM8580 */ + .supply = "DVDD", + .dev_name = "0-001b", + }, +}; + +static struct regulator_init_data wm8350_dcdc4_data = { .constraints = { - .name = "PVDD_LCD", + .name = "PVDD_HI/PVDD_EXT/PVDD_SYS/PVCCM2MTV", .min_uV = 3000000, .max_uV = 3000000, .always_on = 1, }, + .num_consumer_supplies = ARRAY_SIZE(wm8350_dcdc4_consumers), + .consumer_supplies = wm8350_dcdc4_consumers, }; /* OTGi/1190-EV1 HPVDD & AVDD */ @@ -362,10 +443,10 @@ static struct { { WM8350_DCDC_1, &wm8350_dcdc1_data }, { WM8350_DCDC_3, &wm8350_dcdc3_data }, { WM8350_DCDC_4, &wm8350_dcdc4_data }, - { WM8350_DCDC_6, &wm8350_dcdc6_data }, - { WM8350_LDO_1, &wm8350_ldo1_data }, - { WM8350_LDO_2, &wm8350_ldo2_data }, - { WM8350_LDO_3, &wm8350_ldo3_data }, + { WM8350_DCDC_6, &smdk6410_vddarm }, + { WM8350_LDO_1, &smdk6410_vddalive }, + { WM8350_LDO_2, &smdk6410_vddotg }, + { WM8350_LDO_3, &smdk6410_vddlcd }, { WM8350_LDO_4, &wm8350_ldo4_data }, }; @@ -388,6 +469,107 @@ static int __init smdk6410_wm8350_init(struct wm8350 *wm8350) static struct wm8350_platform_data __initdata smdk6410_wm8350_pdata = { .init = smdk6410_wm8350_init, .irq_high = 1, + .irq_base = IRQ_BOARD_START, +}; +#endif + +#ifdef CONFIG_SMDK6410_WM1192_EV1 +static struct gpio_led wm1192_pmic_leds[] = { + { + .name = "PMIC:red:power", + .gpio = GPIO_BOARD_START + 3, + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, +}; + +static struct gpio_led_platform_data wm1192_pmic_led = { + .num_leds = ARRAY_SIZE(wm1192_pmic_leds), + .leds = wm1192_pmic_leds, +}; + +static struct platform_device wm1192_pmic_led_dev = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &wm1192_pmic_led, + }, +}; + +static int wm1192_pre_init(struct wm831x *wm831x) +{ + int ret; + + /* Configure the IRQ line */ + s3c_gpio_setpull(S3C64XX_GPN(12), S3C_GPIO_PULL_UP); + + ret = platform_device_register(&wm1192_pmic_led_dev); + if (ret != 0) + dev_err(wm831x->dev, "Failed to add PMIC LED: %d\n", ret); + + return 0; +} + +static struct wm831x_backlight_pdata wm1192_backlight_pdata = { + .isink = 1, + .max_uA = 27554, +}; + +static struct regulator_init_data wm1192_dcdc3 = { + .constraints = { + .name = "PVDD_MEM/PVDD_GPS", + .always_on = 1, + }, +}; + +static struct regulator_consumer_supply wm1192_ldo1_consumers[] = { + { .supply = "DVDD", .dev_name = "0-001b", }, /* WM8580 */ +}; + +static struct regulator_init_data wm1192_ldo1 = { + .constraints = { + .name = "PVDD_LCD/PVDD_EXT", + .always_on = 1, + }, + .consumer_supplies = wm1192_ldo1_consumers, + .num_consumer_supplies = ARRAY_SIZE(wm1192_ldo1_consumers), +}; + +static struct wm831x_status_pdata wm1192_led7_pdata = { + .name = "LED7:green:", +}; + +static struct wm831x_status_pdata wm1192_led8_pdata = { + .name = "LED8:green:", +}; + +static struct wm831x_pdata smdk6410_wm1192_pdata = { + .pre_init = wm1192_pre_init, + .irq_base = IRQ_BOARD_START, + + .backlight = &wm1192_backlight_pdata, + .dcdc = { + &smdk6410_vddarm, /* DCDC1 */ + &smdk6410_vddint, /* DCDC2 */ + &wm1192_dcdc3, + }, + .gpio_base = GPIO_BOARD_START, + .ldo = { + &wm1192_ldo1, /* LDO1 */ + &smdk6410_vdduh_mmc, /* LDO2 */ + NULL, /* LDO3 NC */ + &smdk6410_vddotgi, /* LDO4 */ + &smdk6410_vddotg, /* LDO5 */ + &smdk6410_vddhi, /* LDO6 */ + &smdk6410_vddaudio, /* LDO7 */ + &smdk6410_vccm2mtv, /* LDO8 */ + &smdk6410_vddpll, /* LDO9 */ + &smdk6410_vccmc3bt, /* LDO10 */ + &smdk6410_vddalive, /* LDO11 */ + }, + .status = { + &wm1192_led7_pdata, + &wm1192_led8_pdata, + }, }; #endif @@ -395,6 +577,13 @@ static struct i2c_board_info i2c_devs0[] __initdata = { { I2C_BOARD_INFO("24c08", 0x50), }, { I2C_BOARD_INFO("wm8580", 0x1b), }, +#ifdef CONFIG_SMDK6410_WM1192_EV1 + { I2C_BOARD_INFO("wm8312", 0x34), + .platform_data = &smdk6410_wm1192_pdata, + .irq = S3C_EINT(12), + }, +#endif + #ifdef CONFIG_SMDK6410_WM1190_EV1 { I2C_BOARD_INFO("wm8350", 0x1a), .platform_data = &smdk6410_wm8350_pdata, @@ -430,10 +619,32 @@ static void __init smdk6410_map_io(void) static void __init smdk6410_machine_init(void) { + u32 cs1; + s3c_i2c0_set_platdata(NULL); s3c_i2c1_set_platdata(NULL); s3c_fb_set_platdata(&smdk6410_lcd_pdata); + /* configure nCS1 width to 16 bits */ + + cs1 = __raw_readl(S3C64XX_SROM_BW) & + ~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT); + cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) | + (1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) | + (1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) << + S3C64XX_SROM_BW__NCS1__SHIFT; + __raw_writel(cs1, S3C64XX_SROM_BW); + + /* set timing for nCS1 suitable for ethernet chip */ + + __raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) | + (6 << S3C64XX_SROM_BCX__TACP__SHIFT) | + (4 << S3C64XX_SROM_BCX__TCAH__SHIFT) | + (1 << S3C64XX_SROM_BCX__TCOH__SHIFT) | + (0xe << S3C64XX_SROM_BCX__TACC__SHIFT) | + (4 << S3C64XX_SROM_BCX__TCOS__SHIFT) | + (0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1); + gpio_request(S3C64XX_GPN(5), "LCD power"); gpio_request(S3C64XX_GPF(13), "LCD power"); gpio_request(S3C64XX_GPF(15), "LCD power"); diff --git a/arch/arm/plat-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c index 47632fc7eb6..b8ac4597fad 100644 --- a/arch/arm/plat-s3c64xx/pm.c +++ b/arch/arm/mach-s3c64xx/pm.c @@ -20,14 +20,14 @@ #include <mach/map.h> #include <plat/pm.h> -#include <plat/regs-sys.h> -#include <plat/regs-gpio.h> -#include <plat/regs-clock.h> -#include <plat/regs-syscon-power.h> -#include <plat/regs-gpio-memport.h> +#include <mach/regs-sys.h> +#include <mach/regs-gpio.h> +#include <mach/regs-clock.h> +#include <mach/regs-syscon-power.h> +#include <mach/regs-gpio-memport.h> #ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK -#include <plat/gpio-bank-n.h> +#include <mach/gpio-bank-n.h> void s3c_pm_debug_smdkled(u32 set, u32 clear) { diff --git a/arch/arm/mach-s3c6400/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c index d876ee50367..707e34e3afd 100644 --- a/arch/arm/mach-s3c6400/s3c6400.c +++ b/arch/arm/mach-s3c64xx/s3c6400.c @@ -1,4 +1,4 @@ -/* linux/arch/arm/mach-s3c6410/cpu.c +/* linux/arch/arm/mach-s3c64xx/cpu.c * * Copyright 2009 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> @@ -30,14 +30,14 @@ #include <plat/cpu-freq.h> #include <plat/regs-serial.h> -#include <plat/regs-clock.h> +#include <mach/regs-clock.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/clock.h> #include <plat/sdhci.h> #include <plat/iic-core.h> -#include <plat/s3c6400.h> +#include <mach/s3c6400.h> void __init s3c6400_map_io(void) { @@ -55,10 +55,7 @@ void __init s3c6400_map_io(void) void __init s3c6400_init_clocks(int xtal) { - printk(KERN_DEBUG "%s: initialising clocks\n", __func__); - s3c24xx_register_baseclocks(xtal); - s3c64xx_register_clocks(); - s3c6400_register_clocks(S3C6400_CLKDIV0_ARM_MASK); + s3c64xx_register_clocks(xtal, S3C6400_CLKDIV0_ARM_MASK); s3c6400_setup_clocks(); } diff --git a/arch/arm/mach-s3c6410/cpu.c b/arch/arm/mach-s3c64xx/s3c6410.c index 522c0869195..59635d19466 100644 --- a/arch/arm/mach-s3c6410/cpu.c +++ b/arch/arm/mach-s3c64xx/s3c6410.c @@ -1,4 +1,4 @@ -/* linux/arch/arm/mach-s3c6410/cpu.c +/* linux/arch/arm/mach-s3c64xx/s3c6410.c * * Copyright 2008 Simtec Electronics * Copyright 2008 Simtec Electronics @@ -31,30 +31,18 @@ #include <plat/cpu-freq.h> #include <plat/regs-serial.h> -#include <plat/regs-clock.h> +#include <mach/regs-clock.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/clock.h> #include <plat/sdhci.h> #include <plat/iic-core.h> -#include <plat/s3c6400.h> -#include <plat/s3c6410.h> - -/* Initial IO mappings */ - -static struct map_desc s3c6410_iodesc[] __initdata = { -}; - -/* s3c6410_map_io - * - * register the standard cpu IO areas -*/ +#include <mach/s3c6400.h> +#include <mach/s3c6410.h> void __init s3c6410_map_io(void) { - iotable_init(s3c6410_iodesc, ARRAY_SIZE(s3c6410_iodesc)); - /* initialise device information early */ s3c6410_default_sdhci0(); s3c6410_default_sdhci1(); @@ -70,9 +58,7 @@ void __init s3c6410_map_io(void) void __init s3c6410_init_clocks(int xtal) { printk(KERN_DEBUG "%s: initialising clocks\n", __func__); - s3c24xx_register_baseclocks(xtal); - s3c64xx_register_clocks(); - s3c6400_register_clocks(S3C6410_CLKDIV0_ARM_MASK); + s3c64xx_register_clocks(xtal, S3C6410_CLKDIV0_ARM_MASK); s3c6400_setup_clocks(); } diff --git a/arch/arm/plat-s3c64xx/setup-fb-24bpp.c b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c index 8e28e448dd2..8e28e448dd2 100644 --- a/arch/arm/plat-s3c64xx/setup-fb-24bpp.c +++ b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c diff --git a/arch/arm/plat-s3c64xx/setup-i2c0.c b/arch/arm/mach-s3c64xx/setup-i2c0.c index 36448076372..d1b11e6e77e 100644 --- a/arch/arm/plat-s3c64xx/setup-i2c0.c +++ b/arch/arm/mach-s3c64xx/setup-i2c0.c @@ -18,8 +18,8 @@ struct platform_device; /* don't need the contents */ #include <mach/gpio.h> +#include <mach/gpio-bank-b.h> #include <plat/iic.h> -#include <plat/gpio-bank-b.h> #include <plat/gpio-cfg.h> void s3c_i2c0_cfg_gpio(struct platform_device *dev) diff --git a/arch/arm/plat-s3c64xx/setup-i2c1.c b/arch/arm/mach-s3c64xx/setup-i2c1.c index bbe229bd90c..2dce57d8c6f 100644 --- a/arch/arm/plat-s3c64xx/setup-i2c1.c +++ b/arch/arm/mach-s3c64xx/setup-i2c1.c @@ -18,8 +18,8 @@ struct platform_device; /* don't need the contents */ #include <mach/gpio.h> +#include <mach/gpio-bank-b.h> #include <plat/iic.h> -#include <plat/gpio-bank-b.h> #include <plat/gpio-cfg.h> void s3c_i2c1_cfg_gpio(struct platform_device *dev) diff --git a/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c b/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c index a58c0cc7ba5..a58c0cc7ba5 100644 --- a/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c +++ b/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c diff --git a/arch/arm/mach-s3c6400/setup-sdhci.c b/arch/arm/mach-s3c64xx/setup-sdhci.c index 1039937403b..1a942037c4e 100644 --- a/arch/arm/mach-s3c6400/setup-sdhci.c +++ b/arch/arm/mach-s3c64xx/setup-sdhci.c @@ -1,11 +1,11 @@ -/* linux/arch/arm/mach-s3c6410/setup-sdhci.c +/* linux/arch/arm/mach-s3c64xx/setup-sdhci.c * * Copyright 2008 Simtec Electronics * Copyright 2008 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * http://armlinux.simtec.co.uk/ * - * S3C6410 - Helper functions for settign up SDHCI device(s) (HSMMC) + * S3C6400/S3C6410 - Helper functions for settign up SDHCI device(s) (HSMMC) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -26,7 +26,7 @@ /* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */ -char *s3c6400_hsmmc_clksrcs[4] = { +char *s3c64xx_hsmmc_clksrcs[4] = { [0] = "hsmmc", [1] = "hsmmc", [2] = "mmc_bus", @@ -61,3 +61,12 @@ void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev, writel(ctrl3, r + S3C_SDHCI_CONTROL3); } +void s3c6410_setup_sdhci_cfg_card(struct platform_device *dev, + void __iomem *r, + struct mmc_ios *ios, + struct mmc_card *card) +{ + writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4); + + s3c6400_setup_sdhci_cfg_card(dev, r, ios, card); +} diff --git a/arch/arm/plat-s3c64xx/sleep.S b/arch/arm/mach-s3c64xx/sleep.S index 8e71fe90a37..b2ef4431736 100644 --- a/arch/arm/plat-s3c64xx/sleep.S +++ b/arch/arm/mach-s3c64xx/sleep.S @@ -1,4 +1,4 @@ -/* linux/0arch/arm/plat-s3c64xx/sleep.S +/* linux/arch/arm/plat-s3c64xx/sleep.S * * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics @@ -19,8 +19,8 @@ #undef S3C64XX_VA_GPIO #define S3C64XX_VA_GPIO (0x0) -#include <plat/regs-gpio.h> -#include <plat/gpio-bank-n.h> +#include <mach/regs-gpio.h> +#include <mach/gpio-bank-n.h> #define LL_UART (S3C_PA_UART + (0x400 * CONFIG_S3C_LOWLEVEL_UART_PORT)) diff --git a/arch/arm/mach-s5p6440/Kconfig b/arch/arm/mach-s5p6440/Kconfig new file mode 100644 index 00000000000..4c29ff8b07d --- /dev/null +++ b/arch/arm/mach-s5p6440/Kconfig @@ -0,0 +1,21 @@ +# arch/arm/mach-s5p6440/Kconfig +# +# Copyright (c) 2009 Samsung Electronics Co., Ltd. +# http://www.samsung.com/ +# +# Licensed under GPLv2 + +if ARCH_S5P6440 + +config CPU_S5P6440 + bool + help + Enable S5P6440 CPU support + +config MACH_SMDK6440 + bool "SMDK6440" + select CPU_S5P6440 + help + Machine support for the Samsung SMDK6440 + +endif diff --git a/arch/arm/mach-s5p6440/Makefile b/arch/arm/mach-s5p6440/Makefile new file mode 100644 index 00000000000..1ad894b1d3a --- /dev/null +++ b/arch/arm/mach-s5p6440/Makefile @@ -0,0 +1,19 @@ +# arch/arm/mach-s5p6440/Makefile +# +# Copyright (c) 2009 Samsung Electronics Co., Ltd. +# http://www.samsung.com/ +# +# Licensed under GPLv2 + +obj-y := +obj-m := +obj-n := +obj- := + +# Core support for S5P6440 system + +obj-$(CONFIG_CPU_S5P6440) += cpu.o init.o clock.o gpio.o + +# machine support + +obj-$(CONFIG_MACH_SMDK6440) += mach-smdk6440.o diff --git a/arch/arm/mach-s5p6440/Makefile.boot b/arch/arm/mach-s5p6440/Makefile.boot new file mode 100644 index 00000000000..ff90aa13bd6 --- /dev/null +++ b/arch/arm/mach-s5p6440/Makefile.boot @@ -0,0 +1,2 @@ + zreladdr-y := 0x20008000 +params_phys-y := 0x20000100 diff --git a/arch/arm/mach-s5p6440/clock.c b/arch/arm/mach-s5p6440/clock.c new file mode 100644 index 00000000000..b2672e16e7a --- /dev/null +++ b/arch/arm/mach-s5p6440/clock.c @@ -0,0 +1,698 @@ +/* linux/arch/arm/mach-s5p6440/clock.c + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P6440 - Clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/sysdev.h> +#include <linux/io.h> + +#include <mach/hardware.h> +#include <mach/map.h> + +#include <plat/cpu-freq.h> +#include <mach/regs-clock.h> +#include <plat/clock.h> +#include <plat/cpu.h> +#include <plat/clock-clksrc.h> +#include <plat/s5p-clock.h> +#include <plat/pll.h> +#include <plat/s5p6440.h> + +/* APLL Mux output clock */ +static struct clksrc_clk clk_mout_apll = { + .clk = { + .name = "mout_apll", + .id = -1, + }, + .sources = &clk_src_apll, + .reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 }, +}; + +static int s5p6440_epll_enable(struct clk *clk, int enable) +{ + unsigned int ctrlbit = clk->ctrlbit; + unsigned int epll_con = __raw_readl(S5P_EPLL_CON) & ~ctrlbit; + + if (enable) + __raw_writel(epll_con | ctrlbit, S5P_EPLL_CON); + else + __raw_writel(epll_con, S5P_EPLL_CON); + + return 0; +} + +static unsigned long s5p6440_epll_get_rate(struct clk *clk) +{ + return clk->rate; +} + +static u32 epll_div[][5] = { + { 36000000, 0, 48, 1, 4 }, + { 48000000, 0, 32, 1, 3 }, + { 60000000, 0, 40, 1, 3 }, + { 72000000, 0, 48, 1, 3 }, + { 84000000, 0, 28, 1, 2 }, + { 96000000, 0, 32, 1, 2 }, + { 32768000, 45264, 43, 1, 4 }, + { 45158000, 6903, 30, 1, 3 }, + { 49152000, 50332, 32, 1, 3 }, + { 67738000, 10398, 45, 1, 3 }, + { 73728000, 9961, 49, 1, 3 } +}; + +static int s5p6440_epll_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned int epll_con, epll_con_k; + unsigned int i; + + if (clk->rate == rate) /* Return if nothing changed */ + return 0; + + epll_con = __raw_readl(S5P_EPLL_CON); + epll_con_k = __raw_readl(S5P_EPLL_CON_K); + + epll_con_k &= ~(PLL90XX_KDIV_MASK); + epll_con &= ~(PLL90XX_MDIV_MASK | PLL90XX_PDIV_MASK | PLL90XX_SDIV_MASK); + + for (i = 0; i < ARRAY_SIZE(epll_div); i++) { + if (epll_div[i][0] == rate) { + epll_con_k |= (epll_div[i][1] << PLL90XX_KDIV_SHIFT); + epll_con |= (epll_div[i][2] << PLL90XX_MDIV_SHIFT) | + (epll_div[i][3] << PLL90XX_PDIV_SHIFT) | + (epll_div[i][4] << PLL90XX_SDIV_SHIFT); + break; + } + } + + if (i == ARRAY_SIZE(epll_div)) { + printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__); + return -EINVAL; + } + + __raw_writel(epll_con, S5P_EPLL_CON); + __raw_writel(epll_con_k, S5P_EPLL_CON_K); + + clk->rate = rate; + + return 0; +} + +static struct clk_ops s5p6440_epll_ops = { + .get_rate = s5p6440_epll_get_rate, + .set_rate = s5p6440_epll_set_rate, +}; + +static struct clksrc_clk clk_mout_epll = { + .clk = { + .name = "mout_epll", + .id = -1, + }, + .sources = &clk_src_epll, + .reg_src = { .reg = S5P_CLK_SRC0, .shift = 2, .size = 1 }, +}; + +static struct clksrc_clk clk_mout_mpll = { + .clk = { + .name = "mout_mpll", + .id = -1, + }, + .sources = &clk_src_mpll, + .reg_src = { .reg = S5P_CLK_SRC0, .shift = 1, .size = 1 }, +}; + +static struct clk clk_h_low = { + .name = "hclk_low", + .id = -1, + .rate = 0, + .parent = NULL, + .ctrlbit = 0, + .ops = &clk_ops_def_setrate, +}; + +static struct clk clk_p_low = { + .name = "pclk_low", + .id = -1, + .rate = 0, + .parent = NULL, + .ctrlbit = 0, + .ops = &clk_ops_def_setrate, +}; + +enum perf_level { + L0 = 532*1000, + L1 = 266*1000, + L2 = 133*1000, +}; + +static const u32 clock_table[][3] = { + /*{ARM_CLK, DIVarm, DIVhclk}*/ + {L0 * 1000, (0 << ARM_DIV_RATIO_SHIFT), (3 << S5P_CLKDIV0_HCLK_SHIFT)}, + {L1 * 1000, (1 << ARM_DIV_RATIO_SHIFT), (1 << S5P_CLKDIV0_HCLK_SHIFT)}, + {L2 * 1000, (3 << ARM_DIV_RATIO_SHIFT), (0 << S5P_CLKDIV0_HCLK_SHIFT)}, +}; + +static unsigned long s5p6440_armclk_get_rate(struct clk *clk) +{ + unsigned long rate = clk_get_rate(clk->parent); + u32 clkdiv; + + /* divisor mask starts at bit0, so no need to shift */ + clkdiv = __raw_readl(ARM_CLK_DIV) & ARM_DIV_MASK; + + return rate / (clkdiv + 1); +} + +static unsigned long s5p6440_armclk_round_rate(struct clk *clk, + unsigned long rate) +{ + u32 iter; + + for (iter = 1 ; iter < ARRAY_SIZE(clock_table) ; iter++) { + if (rate > clock_table[iter][0]) + return clock_table[iter-1][0]; + } + + return clock_table[ARRAY_SIZE(clock_table) - 1][0]; +} + +static int s5p6440_armclk_set_rate(struct clk *clk, unsigned long rate) +{ + u32 round_tmp; + u32 iter; + u32 clk_div0_tmp; + u32 cur_rate = clk->ops->get_rate(clk); + unsigned long flags; + + round_tmp = clk->ops->round_rate(clk, rate); + if (round_tmp == cur_rate) + return 0; + + + for (iter = 0 ; iter < ARRAY_SIZE(clock_table) ; iter++) { + if (round_tmp == clock_table[iter][0]) + break; + } + + if (iter >= ARRAY_SIZE(clock_table)) + iter = ARRAY_SIZE(clock_table) - 1; + + local_irq_save(flags); + if (cur_rate > round_tmp) { + /* Frequency Down */ + clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK); + clk_div0_tmp |= clock_table[iter][1]; + __raw_writel(clk_div0_tmp, ARM_CLK_DIV); + + clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & + ~(S5P_CLKDIV0_HCLK_MASK); + clk_div0_tmp |= clock_table[iter][2]; + __raw_writel(clk_div0_tmp, ARM_CLK_DIV); + + + } else { + /* Frequency Up */ + clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & + ~(S5P_CLKDIV0_HCLK_MASK); + clk_div0_tmp |= clock_table[iter][2]; + __raw_writel(clk_div0_tmp, ARM_CLK_DIV); + + clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK); + clk_div0_tmp |= clock_table[iter][1]; + __raw_writel(clk_div0_tmp, ARM_CLK_DIV); + } + local_irq_restore(flags); + + clk->rate = clock_table[iter][0]; + + return 0; +} + +static struct clk_ops s5p6440_clkarm_ops = { + .get_rate = s5p6440_armclk_get_rate, + .set_rate = s5p6440_armclk_set_rate, + .round_rate = s5p6440_armclk_round_rate, +}; + +static unsigned long s5p6440_clk_doutmpll_get_rate(struct clk *clk) +{ + unsigned long rate = clk_get_rate(clk->parent); + + if (__raw_readl(S5P_CLK_DIV0) & S5P_CLKDIV0_MPLL_MASK) + rate /= 2; + + return rate; +} + +static struct clk clk_dout_mpll = { + .name = "dout_mpll", + .id = -1, + .parent = &clk_mout_mpll.clk, + .ops = &(struct clk_ops) { + .get_rate = s5p6440_clk_doutmpll_get_rate, + }, +}; + +int s5p6440_clk48m_ctrl(struct clk *clk, int enable) +{ + unsigned long flags; + u32 val; + + /* can't rely on clock lock, this register has other usages */ + local_irq_save(flags); + + val = __raw_readl(S5P_OTHERS); + if (enable) + val |= S5P_OTHERS_USB_SIG_MASK; + else + val &= ~S5P_OTHERS_USB_SIG_MASK; + + __raw_writel(val, S5P_OTHERS); + + local_irq_restore(flags); + + return 0; +} + +static int s5p6440_pclk_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLK_GATE_PCLK, clk, enable); +} + +static int s5p6440_hclk0_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLK_GATE_HCLK0, clk, enable); +} + +static int s5p6440_hclk1_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLK_GATE_HCLK1, clk, enable); +} + +static int s5p6440_sclk_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLK_GATE_SCLK0, clk, enable); +} + +static int s5p6440_mem_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLK_GATE_MEM0, clk, enable); +} + +/* + * The following clocks will be disabled during clock initialization. It is + * recommended to keep the following clocks disabled until the driver requests + * for enabling the clock. + */ +static struct clk init_clocks_disable[] = { + { + .name = "nand", + .id = -1, + .parent = &clk_h, + .enable = s5p6440_mem_ctrl, + .ctrlbit = S5P_CLKCON_MEM0_HCLK_NFCON, + }, { + .name = "adc", + .id = -1, + .parent = &clk_p_low, + .enable = s5p6440_pclk_ctrl, + .ctrlbit = S5P_CLKCON_PCLK_TSADC, + }, { + .name = "i2c", + .id = -1, + .parent = &clk_p_low, + .enable = s5p6440_pclk_ctrl, + .ctrlbit = S5P_CLKCON_PCLK_IIC0, + }, { + .name = "i2s_v40", + .id = 0, + .parent = &clk_p_low, + .enable = s5p6440_pclk_ctrl, + .ctrlbit = S5P_CLKCON_PCLK_IIS2, + }, { + .name = "spi", + .id = 0, + .parent = &clk_p_low, + .enable = s5p6440_pclk_ctrl, + .ctrlbit = S5P_CLKCON_PCLK_SPI0, + }, { + .name = "spi", + .id = 1, + .parent = &clk_p_low, + .enable = s5p6440_pclk_ctrl, + .ctrlbit = S5P_CLKCON_PCLK_SPI1, + }, { + .name = "sclk_spi_48", + .id = 0, + .parent = &clk_48m, + .enable = s5p6440_sclk_ctrl, + .ctrlbit = S5P_CLKCON_SCLK0_SPI0_48, + }, { + .name = "sclk_spi_48", + .id = 1, + .parent = &clk_48m, + .enable = s5p6440_sclk_ctrl, + .ctrlbit = S5P_CLKCON_SCLK0_SPI1_48, + }, { + .name = "mmc_48m", + .id = 0, + .parent = &clk_48m, + .enable = s5p6440_sclk_ctrl, + .ctrlbit = S5P_CLKCON_SCLK0_MMC0_48, + }, { + .name = "mmc_48m", + .id = 1, + .parent = &clk_48m, + .enable = s5p6440_sclk_ctrl, + .ctrlbit = S5P_CLKCON_SCLK0_MMC1_48, + }, { + .name = "mmc_48m", + .id = 2, + .parent = &clk_48m, + .enable = s5p6440_sclk_ctrl, + .ctrlbit = S5P_CLKCON_SCLK0_MMC2_48, + }, { + .name = "otg", + .id = -1, + .parent = &clk_h_low, + .enable = s5p6440_hclk0_ctrl, + .ctrlbit = S5P_CLKCON_HCLK0_USB + }, { + .name = "post", + .id = -1, + .parent = &clk_h_low, + .enable = s5p6440_hclk0_ctrl, + .ctrlbit = S5P_CLKCON_HCLK0_POST0 + }, { + .name = "lcd", + .id = -1, + .parent = &clk_h_low, + .enable = s5p6440_hclk1_ctrl, + .ctrlbit = S5P_CLKCON_HCLK1_DISPCON, + }, { + .name = "hsmmc", + .id = 0, + .parent = &clk_h_low, + .enable = s5p6440_hclk0_ctrl, + .ctrlbit = S5P_CLKCON_HCLK0_HSMMC0, + }, { + .name = "hsmmc", + .id = 1, + .parent = &clk_h_low, + .enable = s5p6440_hclk0_ctrl, + .ctrlbit = S5P_CLKCON_HCLK0_HSMMC1, + }, { + .name = "hsmmc", + .id = 2, + .parent = &clk_h_low, + .enable = s5p6440_hclk0_ctrl, + .ctrlbit = S5P_CLKCON_HCLK0_HSMMC2, + }, { + .name = "rtc", + .id = -1, + .parent = &clk_p_low, + .enable = s5p6440_pclk_ctrl, + .ctrlbit = S5P_CLKCON_PCLK_RTC, + }, { + .name = "watchdog", + .id = -1, + .parent = &clk_p_low, + .enable = s5p6440_pclk_ctrl, + .ctrlbit = S5P_CLKCON_PCLK_WDT, + }, { + .name = "timers", + .id = -1, + .parent = &clk_p_low, + .enable = s5p6440_pclk_ctrl, + .ctrlbit = S5P_CLKCON_PCLK_PWM, + } +}; + +/* + * The following clocks will be enabled during clock initialization. + */ +static struct clk init_clocks[] = { + { + .name = "gpio", + .id = -1, + .parent = &clk_p_low, + .enable = s5p6440_pclk_ctrl, + .ctrlbit = S5P_CLKCON_PCLK_GPIO, + }, { + .name = "uart", + .id = 0, + .parent = &clk_p_low, + .enable = s5p6440_pclk_ctrl, + .ctrlbit = S5P_CLKCON_PCLK_UART0, + }, { + .name = "uart", + .id = 1, + .parent = &clk_p_low, + .enable = s5p6440_pclk_ctrl, + .ctrlbit = S5P_CLKCON_PCLK_UART1, + }, { + .name = "uart", + .id = 2, + .parent = &clk_p_low, + .enable = s5p6440_pclk_ctrl, + .ctrlbit = S5P_CLKCON_PCLK_UART2, + }, { + .name = "uart", + .id = 3, + .parent = &clk_p_low, + .enable = s5p6440_pclk_ctrl, + .ctrlbit = S5P_CLKCON_PCLK_UART3, + } +}; + +static struct clk clk_iis_cd_v40 = { + .name = "iis_cdclk_v40", + .id = -1, +}; + +static struct clk clk_pcm_cd = { + .name = "pcm_cdclk", + .id = -1, +}; + +static struct clk *clkset_spi_mmc_list[] = { + &clk_mout_epll.clk, + &clk_dout_mpll, + &clk_fin_epll, +}; + +static struct clksrc_sources clkset_spi_mmc = { + .sources = clkset_spi_mmc_list, + .nr_sources = ARRAY_SIZE(clkset_spi_mmc_list), +}; + +static struct clk *clkset_uart_list[] = { + &clk_mout_epll.clk, + &clk_dout_mpll +}; + +static struct clksrc_sources clkset_uart = { + .sources = clkset_uart_list, + .nr_sources = ARRAY_SIZE(clkset_uart_list), +}; + +static struct clksrc_clk clksrcs[] = { + { + .clk = { + .name = "mmc_bus", + .id = 0, + .ctrlbit = S5P_CLKCON_SCLK0_MMC0, + .enable = s5p6440_sclk_ctrl, + }, + .sources = &clkset_spi_mmc, + .reg_src = { .reg = S5P_CLK_SRC0, .shift = 18, .size = 2 }, + .reg_div = { .reg = S5P_CLK_DIV1, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "mmc_bus", + .id = 1, + .ctrlbit = S5P_CLKCON_SCLK0_MMC1, + .enable = s5p6440_sclk_ctrl, + }, + .sources = &clkset_spi_mmc, + .reg_src = { .reg = S5P_CLK_SRC0, .shift = 20, .size = 2 }, + .reg_div = { .reg = S5P_CLK_DIV1, .shift = 4, .size = 4 }, + }, { + .clk = { + .name = "mmc_bus", + .id = 2, + .ctrlbit = S5P_CLKCON_SCLK0_MMC2, + .enable = s5p6440_sclk_ctrl, + }, + .sources = &clkset_spi_mmc, + .reg_src = { .reg = S5P_CLK_SRC0, .shift = 22, .size = 2 }, + .reg_div = { .reg = S5P_CLK_DIV1, .shift = 8, .size = 4 }, + }, { + .clk = { + .name = "uclk1", + .id = -1, + .ctrlbit = S5P_CLKCON_SCLK0_UART, + .enable = s5p6440_sclk_ctrl, + }, + .sources = &clkset_uart, + .reg_src = { .reg = S5P_CLK_SRC0, .shift = 13, .size = 1 }, + .reg_div = { .reg = S5P_CLK_DIV2, .shift = 16, .size = 4 }, + }, { + .clk = { + .name = "spi_epll", + .id = 0, + .ctrlbit = S5P_CLKCON_SCLK0_SPI0, + .enable = s5p6440_sclk_ctrl, + }, + .sources = &clkset_spi_mmc, + .reg_src = { .reg = S5P_CLK_SRC0, .shift = 14, .size = 2 }, + .reg_div = { .reg = S5P_CLK_DIV2, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "spi_epll", + .id = 1, + .ctrlbit = S5P_CLKCON_SCLK0_SPI1, + .enable = s5p6440_sclk_ctrl, + }, + .sources = &clkset_spi_mmc, + .reg_src = { .reg = S5P_CLK_SRC0, .shift = 16, .size = 2 }, + .reg_div = { .reg = S5P_CLK_DIV2, .shift = 4, .size = 4 }, + } +}; + +/* Clock initialisation code */ +static struct clksrc_clk *init_parents[] = { + &clk_mout_apll, + &clk_mout_epll, + &clk_mout_mpll, +}; + +void __init_or_cpufreq s5p6440_setup_clocks(void) +{ + struct clk *xtal_clk; + unsigned long xtal; + unsigned long fclk; + unsigned long hclk; + unsigned long hclk_low; + unsigned long pclk; + unsigned long pclk_low; + unsigned long epll; + unsigned long apll; + unsigned long mpll; + unsigned int ptr; + u32 clkdiv0; + u32 clkdiv3; + + /* Set S5P6440 functions for clk_fout_epll */ + clk_fout_epll.enable = s5p6440_epll_enable; + clk_fout_epll.ops = &s5p6440_epll_ops; + + /* Set S5P6440 functions for arm clock */ + clk_arm.parent = &clk_mout_apll.clk; + clk_arm.ops = &s5p6440_clkarm_ops; + clk_48m.enable = s5p6440_clk48m_ctrl; + + clkdiv0 = __raw_readl(S5P_CLK_DIV0); + clkdiv3 = __raw_readl(S5P_CLK_DIV3); + + xtal_clk = clk_get(NULL, "ext_xtal"); + BUG_ON(IS_ERR(xtal_clk)); + + xtal = clk_get_rate(xtal_clk); + clk_put(xtal_clk); + + epll = s5p_get_pll90xx(xtal, __raw_readl(S5P_EPLL_CON), + __raw_readl(S5P_EPLL_CON_K)); + mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502); + apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4502); + + printk(KERN_INFO "S5P6440: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz," \ + " E=%ld.%ldMHz\n", + print_mhz(apll), print_mhz(mpll), print_mhz(epll)); + + fclk = apll / GET_DIV(clkdiv0, S5P_CLKDIV0_ARM); + hclk = fclk / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK); + pclk = hclk / GET_DIV(clkdiv0, S5P_CLKDIV0_PCLK); + + if (__raw_readl(S5P_OTHERS) & S5P_OTHERS_HCLK_LOW_SEL_MPLL) { + /* Asynchronous mode */ + hclk_low = mpll / GET_DIV(clkdiv3, S5P_CLKDIV3_HCLK_LOW); + } else { + /* Synchronous mode */ + hclk_low = apll / GET_DIV(clkdiv3, S5P_CLKDIV3_HCLK_LOW); + } + + pclk_low = hclk_low / GET_DIV(clkdiv3, S5P_CLKDIV3_PCLK_LOW); + + printk(KERN_INFO "S5P6440: HCLK=%ld.%ldMHz, HCLK_LOW=%ld.%ldMHz," \ + " PCLK=%ld.%ldMHz, PCLK_LOW=%ld.%ldMHz\n", + print_mhz(hclk), print_mhz(hclk_low), + print_mhz(pclk), print_mhz(pclk_low)); + + clk_fout_mpll.rate = mpll; + clk_fout_epll.rate = epll; + clk_fout_apll.rate = apll; + + clk_f.rate = fclk; + clk_h.rate = hclk; + clk_p.rate = pclk; + clk_h_low.rate = hclk_low; + clk_p_low.rate = pclk_low; + + for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++) + s3c_set_clksrc(init_parents[ptr], true); + + for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) + s3c_set_clksrc(&clksrcs[ptr], true); +} + +static struct clk *clks[] __initdata = { + &clk_ext, + &clk_mout_epll.clk, + &clk_mout_mpll.clk, + &clk_dout_mpll, + &clk_iis_cd_v40, + &clk_pcm_cd, + &clk_p_low, + &clk_h_low, +}; + +void __init s5p6440_register_clocks(void) +{ + struct clk *clkp; + int ret; + int ptr; + + ret = s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); + if (ret > 0) + printk(KERN_ERR "Failed to register %u clocks\n", ret); + + s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); + s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); + + clkp = init_clocks_disable; + for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) { + + ret = s3c24xx_register_clock(clkp); + if (ret < 0) { + printk(KERN_ERR "Failed to register clock %s (%d)\n", + clkp->name, ret); + } + (clkp->enable)(clkp, 0); + } + + s3c_pwmclk_init(); +} diff --git a/arch/arm/mach-s5p6440/cpu.c b/arch/arm/mach-s5p6440/cpu.c new file mode 100644 index 00000000000..1794131aeac --- /dev/null +++ b/arch/arm/mach-s5p6440/cpu.c @@ -0,0 +1,114 @@ +/* linux/arch/arm/mach-s5p6440/cpu.c + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/sysdev.h> +#include <linux/serial_core.h> +#include <linux/platform_device.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <asm/proc-fns.h> + +#include <mach/hardware.h> +#include <mach/map.h> +#include <asm/irq.h> + +#include <plat/regs-serial.h> +#include <mach/regs-clock.h> + +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/clock.h> +#include <plat/s5p6440.h> + +static void s5p6440_idle(void) +{ + unsigned long val; + + if (!need_resched()) { + val = __raw_readl(S5P_PWR_CFG); + val &= ~(0x3<<5); + val |= (0x1<<5); + __raw_writel(val, S5P_PWR_CFG); + + cpu_do_idle(); + } + local_irq_enable(); +} + +/* s5p6440_map_io + * + * register the standard cpu IO areas +*/ + +void __init s5p6440_map_io(void) +{ + /* initialize any device information early */ +} + +void __init s5p6440_init_clocks(int xtal) +{ + printk(KERN_DEBUG "%s: initializing clocks\n", __func__); + + s3c24xx_register_baseclocks(xtal); + s5p_register_clocks(xtal); + s5p6440_register_clocks(); + s5p6440_setup_clocks(); +} + +void __init s5p6440_init_irq(void) +{ + /* S5P6440 supports only 2 VIC */ + u32 vic[2]; + + /* + * VIC0 is missing IRQ_VIC0[3, 4, 8, 10, (12-22)] + * VIC1 is missing IRQ VIC1[1, 3, 4, 10, 11, 12, 14, 15, 22] + */ + vic[0] = 0xff800ae7; + vic[1] = 0xffbf23e5; + + s5p_init_irq(vic, ARRAY_SIZE(vic)); +} + +static struct sysdev_class s5p6440_sysclass = { + .name = "s5p6440-core", +}; + +static struct sys_device s5p6440_sysdev = { + .cls = &s5p6440_sysclass, +}; + +static int __init s5p6440_core_init(void) +{ + return sysdev_class_register(&s5p6440_sysclass); +} + +core_initcall(s5p6440_core_init); + +int __init s5p6440_init(void) +{ + printk(KERN_INFO "S5P6440: Initializing architecture\n"); + + /* set idle function */ + pm_idle = s5p6440_idle; + + return sysdev_register(&s5p6440_sysdev); +} diff --git a/arch/arm/mach-s5p6440/gpio.c b/arch/arm/mach-s5p6440/gpio.c new file mode 100644 index 00000000000..b0ea741177a --- /dev/null +++ b/arch/arm/mach-s5p6440/gpio.c @@ -0,0 +1,322 @@ +/* arch/arm/mach-s5p6440/gpio.c + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P6440 - GPIOlib support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <mach/map.h> +#include <mach/gpio.h> +#include <mach/regs-gpio.h> +#include <plat/gpio-core.h> +#include <plat/gpio-cfg.h> +#include <plat/gpio-cfg-helpers.h> + +/* GPIO bank summary: +* +* Bank GPIOs Style SlpCon ExtInt Group +* A 6 4Bit Yes 1 +* B 7 4Bit Yes 1 +* C 8 4Bit Yes 2 +* F 2 2Bit Yes 4 [1] +* G 7 4Bit Yes 5 +* H 10 4Bit[2] Yes 6 +* I 16 2Bit Yes None +* J 12 2Bit Yes None +* N 16 2Bit No IRQ_EINT +* P 8 2Bit Yes 8 +* R 15 4Bit[2] Yes 8 +* +* [1] BANKF pins 14,15 do not form part of the external interrupt sources +* [2] BANK has two control registers, GPxCON0 and GPxCON1 +*/ + +static int s5p6440_gpiolib_rbank_4bit2_input(struct gpio_chip *chip, + unsigned int offset) +{ + struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); + void __iomem *base = ourchip->base; + void __iomem *regcon = base; + unsigned long con; + + switch (offset) { + case 6: + offset += 1; + case 0: + case 1: + case 2: + case 3: + case 4: + case 5: + regcon -= 4; + break; + default: + offset -= 7; + break; + } + + con = __raw_readl(regcon); + con &= ~(0xf << con_4bit_shift(offset)); + __raw_writel(con, regcon); + + return 0; +} + +static int s5p6440_gpiolib_rbank_4bit2_output(struct gpio_chip *chip, + unsigned int offset, int value) +{ + struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); + void __iomem *base = ourchip->base; + void __iomem *regcon = base; + unsigned long con; + unsigned long dat; + unsigned con_offset = offset; + + switch (con_offset) { + case 6: + con_offset += 1; + case 0: + case 1: + case 2: + case 3: + case 4: + case 5: + regcon -= 4; + break; + default: + con_offset -= 7; + break; + } + + con = __raw_readl(regcon); + con &= ~(0xf << con_4bit_shift(con_offset)); + con |= 0x1 << con_4bit_shift(con_offset); + + dat = __raw_readl(base + GPIODAT_OFF); + if (value) + dat |= 1 << offset; + else + dat &= ~(1 << offset); + + __raw_writel(con, regcon); + __raw_writel(dat, base + GPIODAT_OFF); + + return 0; +} + +int s5p6440_gpio_setcfg_4bit_rbank(struct s3c_gpio_chip *chip, + unsigned int off, unsigned int cfg) +{ + void __iomem *reg = chip->base; + unsigned int shift; + u32 con; + + switch (off) { + case 0: + case 1: + case 2: + case 3: + case 4: + case 5: + shift = (off & 7) * 4; + reg -= 4; + break; + case 6: + shift = ((off + 1) & 7) * 4; + reg -= 4; + default: + shift = ((off + 1) & 7) * 4; + break; + } + + if (s3c_gpio_is_cfg_special(cfg)) { + cfg &= 0xf; + cfg <<= shift; + } + + con = __raw_readl(reg); + con &= ~(0xf << shift); + con |= cfg; + __raw_writel(con, reg); + + return 0; +} + +static struct s3c_gpio_cfg s5p6440_gpio_cfgs[] = { + { + .cfg_eint = 0, + }, { + .cfg_eint = 7, + }, { + .cfg_eint = 3, + .set_config = s5p6440_gpio_setcfg_4bit_rbank, + }, { + .cfg_eint = 0, + .set_config = s3c_gpio_setcfg_s3c24xx, + }, { + .cfg_eint = 2, + .set_config = s3c_gpio_setcfg_s3c24xx, + }, { + .cfg_eint = 3, + .set_config = s3c_gpio_setcfg_s3c24xx, + }, +}; + +static struct s3c_gpio_chip s5p6440_gpio_4bit[] = { + { + .base = S5P6440_GPA_BASE, + .config = &s5p6440_gpio_cfgs[1], + .chip = { + .base = S5P6440_GPA(0), + .ngpio = S5P6440_GPIO_A_NR, + .label = "GPA", + }, + }, { + .base = S5P6440_GPB_BASE, + .config = &s5p6440_gpio_cfgs[1], + .chip = { + .base = S5P6440_GPB(0), + .ngpio = S5P6440_GPIO_B_NR, + .label = "GPB", + }, + }, { + .base = S5P6440_GPC_BASE, + .config = &s5p6440_gpio_cfgs[1], + .chip = { + .base = S5P6440_GPC(0), + .ngpio = S5P6440_GPIO_C_NR, + .label = "GPC", + }, + }, { + .base = S5P6440_GPG_BASE, + .config = &s5p6440_gpio_cfgs[1], + .chip = { + .base = S5P6440_GPG(0), + .ngpio = S5P6440_GPIO_G_NR, + .label = "GPG", + }, + }, +}; + +static struct s3c_gpio_chip s5p6440_gpio_4bit2[] = { + { + .base = S5P6440_GPH_BASE + 0x4, + .config = &s5p6440_gpio_cfgs[1], + .chip = { + .base = S5P6440_GPH(0), + .ngpio = S5P6440_GPIO_H_NR, + .label = "GPH", + }, + }, +}; + +static struct s3c_gpio_chip gpio_rbank_4bit2[] = { + { + .base = S5P6440_GPR_BASE + 0x4, + .config = &s5p6440_gpio_cfgs[2], + .chip = { + .base = S5P6440_GPR(0), + .ngpio = S5P6440_GPIO_R_NR, + .label = "GPR", + }, + }, +}; + +static struct s3c_gpio_chip s5p6440_gpio_2bit[] = { + { + .base = S5P6440_GPF_BASE, + .config = &s5p6440_gpio_cfgs[5], + .chip = { + .base = S5P6440_GPF(0), + .ngpio = S5P6440_GPIO_F_NR, + .label = "GPF", + }, + }, { + .base = S5P6440_GPI_BASE, + .config = &s5p6440_gpio_cfgs[3], + .chip = { + .base = S5P6440_GPI(0), + .ngpio = S5P6440_GPIO_I_NR, + .label = "GPI", + }, + }, { + .base = S5P6440_GPJ_BASE, + .config = &s5p6440_gpio_cfgs[3], + .chip = { + .base = S5P6440_GPJ(0), + .ngpio = S5P6440_GPIO_J_NR, + .label = "GPJ", + }, + }, { + .base = S5P6440_GPN_BASE, + .config = &s5p6440_gpio_cfgs[4], + .chip = { + .base = S5P6440_GPN(0), + .ngpio = S5P6440_GPIO_N_NR, + .label = "GPN", + }, + }, { + .base = S5P6440_GPP_BASE, + .config = &s5p6440_gpio_cfgs[5], + .chip = { + .base = S5P6440_GPP(0), + .ngpio = S5P6440_GPIO_P_NR, + .label = "GPP", + }, + }, +}; + +void __init s5p6440_gpiolib_set_cfg(struct s3c_gpio_cfg *chipcfg, int nr_chips) +{ + for (; nr_chips > 0; nr_chips--, chipcfg++) { + if (!chipcfg->set_config) + chipcfg->set_config = s3c_gpio_setcfg_s3c64xx_4bit; + if (!chipcfg->set_pull) + chipcfg->set_pull = s3c_gpio_setpull_updown; + if (!chipcfg->get_pull) + chipcfg->get_pull = s3c_gpio_getpull_updown; + } +} + +static void __init s5p6440_gpio_add_rbank_4bit2(struct s3c_gpio_chip *chip, + int nr_chips) +{ + for (; nr_chips > 0; nr_chips--, chip++) { + chip->chip.direction_input = s5p6440_gpiolib_rbank_4bit2_input; + chip->chip.direction_output = + s5p6440_gpiolib_rbank_4bit2_output; + s3c_gpiolib_add(chip); + } +} + +static int __init s5p6440_gpiolib_init(void) +{ + struct s3c_gpio_chip *chips = s5p6440_gpio_2bit; + int nr_chips = ARRAY_SIZE(s5p6440_gpio_2bit); + + s5p6440_gpiolib_set_cfg(s5p6440_gpio_cfgs, + ARRAY_SIZE(s5p6440_gpio_cfgs)); + + for (; nr_chips > 0; nr_chips--, chips++) + s3c_gpiolib_add(chips); + + samsung_gpiolib_add_4bit_chips(s5p6440_gpio_4bit, + ARRAY_SIZE(s5p6440_gpio_4bit)); + + samsung_gpiolib_add_4bit2_chips(s5p6440_gpio_4bit2, + ARRAY_SIZE(s5p6440_gpio_4bit2)); + + s5p6440_gpio_add_rbank_4bit2(gpio_rbank_4bit2, + ARRAY_SIZE(gpio_rbank_4bit2)); + + return 0; +} +arch_initcall(s5p6440_gpiolib_init); diff --git a/arch/arm/mach-s5p6440/include/mach/debug-macro.S b/arch/arm/mach-s5p6440/include/mach/debug-macro.S new file mode 100644 index 00000000000..48cdb0da026 --- /dev/null +++ b/arch/arm/mach-s5p6440/include/mach/debug-macro.S @@ -0,0 +1,37 @@ +/* linux/arch/arm/mach-s5p6440/include/mach/debug-macro.S + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* pull in the relevant register and map files. */ + +#include <mach/map.h> +#include <plat/regs-serial.h> + + /* note, for the boot process to work we have to keep the UART + * virtual address aligned to an 1MiB boundary for the L1 + * mapping the head code makes. We keep the UART virtual address + * aligned and add in the offset when we load the value here. + */ + + .macro addruart, rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 + ldreq \rx, = S3C_PA_UART + ldrne \rx, = S3C_VA_UART +#if CONFIG_DEBUG_S3C_UART != 0 + add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART) +#endif + .endm + +/* include the reset of the code which will do the work, we're only + * compiling for a single cpu processor type so the default of s3c2440 + * will be fine with us. + */ + +#include <plat/debug-macro.S> diff --git a/arch/arm/mach-s5p6440/include/mach/entry-macro.S b/arch/arm/mach-s5p6440/include/mach/entry-macro.S new file mode 100644 index 00000000000..e65f1b96726 --- /dev/null +++ b/arch/arm/mach-s5p6440/include/mach/entry-macro.S @@ -0,0 +1,16 @@ +/* linux/arch/arm/mach-s5p6440/include/mach/entry-macro.S + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Low-level IRQ helper macros for the Samsung S5P6440 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <mach/map.h> +#include <plat/irqs.h> + +#include <asm/entry-macro-vic2.S> diff --git a/arch/arm/mach-s5p6440/include/mach/gpio.h b/arch/arm/mach-s5p6440/include/mach/gpio.h new file mode 100644 index 00000000000..21783834f2a --- /dev/null +++ b/arch/arm/mach-s5p6440/include/mach/gpio.h @@ -0,0 +1,80 @@ +/* linux/arch/arm/mach-s5p6440/include/mach/gpio.h + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P6440 - GPIO lib support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_GPIO_H +#define __ASM_ARCH_GPIO_H __FILE__ + +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep +#define gpio_to_irq __gpio_to_irq + +/* GPIO bank sizes */ +#define S5P6440_GPIO_A_NR (6) +#define S5P6440_GPIO_B_NR (7) +#define S5P6440_GPIO_C_NR (8) +#define S5P6440_GPIO_F_NR (2) +#define S5P6440_GPIO_G_NR (7) +#define S5P6440_GPIO_H_NR (10) +#define S5P6440_GPIO_I_NR (16) +#define S5P6440_GPIO_J_NR (12) +#define S5P6440_GPIO_N_NR (16) +#define S5P6440_GPIO_P_NR (8) +#define S5P6440_GPIO_R_NR (15) + +/* GPIO bank numbers */ + +/* CONFIG_S3C_GPIO_SPACE allows the user to select extra + * space for debugging purposes so that any accidental + * change from one gpio bank to another can be caught. +*/ +#define S5P6440_GPIO_NEXT(__gpio) \ + ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1) + +enum s5p_gpio_number { + S5P6440_GPIO_A_START = 0, + S5P6440_GPIO_B_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_A), + S5P6440_GPIO_C_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_B), + S5P6440_GPIO_F_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_C), + S5P6440_GPIO_G_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_F), + S5P6440_GPIO_H_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_G), + S5P6440_GPIO_I_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_H), + S5P6440_GPIO_J_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_I), + S5P6440_GPIO_N_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_J), + S5P6440_GPIO_P_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_N), + S5P6440_GPIO_R_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_P), +}; + +/* S5P6440 GPIO number definitions. */ +#define S5P6440_GPA(_nr) (S5P6440_GPIO_A_START + (_nr)) +#define S5P6440_GPB(_nr) (S5P6440_GPIO_B_START + (_nr)) +#define S5P6440_GPC(_nr) (S5P6440_GPIO_C_START + (_nr)) +#define S5P6440_GPF(_nr) (S5P6440_GPIO_F_START + (_nr)) +#define S5P6440_GPG(_nr) (S5P6440_GPIO_G_START + (_nr)) +#define S5P6440_GPH(_nr) (S5P6440_GPIO_H_START + (_nr)) +#define S5P6440_GPI(_nr) (S5P6440_GPIO_I_START + (_nr)) +#define S5P6440_GPJ(_nr) (S5P6440_GPIO_J_START + (_nr)) +#define S5P6440_GPN(_nr) (S5P6440_GPIO_N_START + (_nr)) +#define S5P6440_GPP(_nr) (S5P6440_GPIO_P_START + (_nr)) +#define S5P6440_GPR(_nr) (S5P6440_GPIO_R_START + (_nr)) + +/* the end of the S5P6440 specific gpios */ +#define S5P6440_GPIO_END (S5P6440_GPR(S5P6440_GPIO_R_NR) + 1) +#define S3C_GPIO_END S5P6440_GPIO_END + +/* define the number of gpios we need to the one after the GPR() range */ +#define ARCH_NR_GPIOS (S5P6440_GPR(S5P6440_GPIO_R_NR) + \ + CONFIG_SAMSUNG_GPIO_EXTRA + 1) + +#include <asm-generic/gpio.h> + +#endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/hardware.h b/arch/arm/mach-s5p6440/include/mach/hardware.h new file mode 100644 index 00000000000..be8b26e875d --- /dev/null +++ b/arch/arm/mach-s5p6440/include/mach/hardware.h @@ -0,0 +1,18 @@ +/* linux/arch/arm/mach-s5p6440/include/mach/hardware.h + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P6440 - Hardware support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H __FILE__ + +/* currently nothing here, placeholder */ + +#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/io.h b/arch/arm/mach-s5p6440/include/mach/io.h new file mode 100644 index 00000000000..fa2d69cb1ad --- /dev/null +++ b/arch/arm/mach-s5p6440/include/mach/io.h @@ -0,0 +1,18 @@ +/* arch/arm/mach-s5p6440/include/mach/io.h + * + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben-linux@fluff.org> + * + * Default IO routines for S3C64XX based + */ + +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +/* No current ISA/PCI bus support. */ +#define __io(a) __typesafe_io(a) +#define __mem_pci(a) (a) + +#define IO_SPACE_LIMIT (0xFFFFFFFF) + +#endif diff --git a/arch/arm/mach-s5p6440/include/mach/irqs.h b/arch/arm/mach-s5p6440/include/mach/irqs.h new file mode 100644 index 00000000000..a4b9b40d18f --- /dev/null +++ b/arch/arm/mach-s5p6440/include/mach/irqs.h @@ -0,0 +1,111 @@ +/* linux/arch/arm/mach-s5p6440/include/mach/irqs.h + * + * Copyright 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P6440 - IRQ definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_S5P_IRQS_H +#define __ASM_ARCH_S5P_IRQS_H __FILE__ + +#include <plat/irqs.h> + +/* VIC0 */ + +#define IRQ_EINT0_3 S5P_IRQ_VIC0(0) +#define IRQ_EINT4_11 S5P_IRQ_VIC0(1) +#define IRQ_RTC_TIC S5P_IRQ_VIC0(2) +#define IRQ_IIC1 S5P_IRQ_VIC0(5) +#define IRQ_I2SV40 S5P_IRQ_VIC0(6) +#define IRQ_GPS S5P_IRQ_VIC0(7) +#define IRQ_POST0 S5P_IRQ_VIC0(9) +#define IRQ_2D S5P_IRQ_VIC0(11) +#define IRQ_TIMER0_VIC S5P_IRQ_VIC0(23) +#define IRQ_TIMER1_VIC S5P_IRQ_VIC0(24) +#define IRQ_TIMER2_VIC S5P_IRQ_VIC0(25) +#define IRQ_WDT S5P_IRQ_VIC0(26) +#define IRQ_TIMER3_VIC S5P_IRQ_VIC0(27) +#define IRQ_TIMER4_VIC S5P_IRQ_VIC0(28) +#define IRQ_DISPCON0 S5P_IRQ_VIC0(29) +#define IRQ_DISPCON1 S5P_IRQ_VIC0(30) +#define IRQ_DISPCON2 S5P_IRQ_VIC0(31) + +/* VIC1 */ + +#define IRQ_EINT12_15 S5P_IRQ_VIC1(0) +#define IRQ_PCM0 S5P_IRQ_VIC1(2) +#define IRQ_UART0 S5P_IRQ_VIC1(5) +#define IRQ_UART1 S5P_IRQ_VIC1(6) +#define IRQ_UART2 S5P_IRQ_VIC1(7) +#define IRQ_UART3 S5P_IRQ_VIC1(8) +#define IRQ_DMA0 S5P_IRQ_VIC1(9) +#define IRQ_NFC S5P_IRQ_VIC1(13) +#define IRQ_SPI0 S5P_IRQ_VIC1(16) +#define IRQ_SPI1 S5P_IRQ_VIC1(17) +#define IRQ_IIC S5P_IRQ_VIC1(18) +#define IRQ_DISPCON3 S5P_IRQ_VIC1(19) +#define IRQ_FIMGVG S5P_IRQ_VIC1(20) +#define IRQ_EINT_GROUPS S5P_IRQ_VIC1(21) +#define IRQ_PMUIRQ S5P_IRQ_VIC1(23) +#define IRQ_HSMMC0 S5P_IRQ_VIC1(24) +#define IRQ_HSMMC1 S5P_IRQ_VIC1(25) +#define IRQ_HSMMC2 IRQ_SPI1 /* shared with SPI1 */ +#define IRQ_OTG S5P_IRQ_VIC1(26) +#define IRQ_DSI S5P_IRQ_VIC1(27) +#define IRQ_RTC_ALARM S5P_IRQ_VIC1(28) +#define IRQ_TSI S5P_IRQ_VIC1(29) +#define IRQ_PENDN S5P_IRQ_VIC1(30) +#define IRQ_TC IRQ_PENDN +#define IRQ_ADC S5P_IRQ_VIC1(31) + +/* + * Since the IRQ_EINT(x) are a linear mapping on s5p6440 we just defined + * them as an IRQ_EINT(x) macro from S5P_IRQ_EINT_BASE which we place + * after the pair of VICs. + */ + +#define S5P_IRQ_EINT_BASE (S5P_IRQ_VIC1(31) + 6) + +#define S5P_EINT(x) ((x) + S5P_IRQ_EINT_BASE) +#define IRQ_EINT(x) S5P_EINT(x) + +/* + * Next the external interrupt groups. These are similar to the IRQ_EINT(x) + * that they are sourced from the GPIO pins but with a different scheme for + * priority and source indication. + * + * The IRQ_EINT(x) can be thought of as 'group 0' of the available GPIO + * interrupts, but for historical reasons they are kept apart from these + * next interrupts. + * + * Use IRQ_EINT_GROUP(group, offset) to get the number for use in the + * machine specific support files. + */ + +/* Actually, #6 and #7 are missing in the EINT_GROUP1 */ +#define IRQ_EINT_GROUP1_NR (15) +#define IRQ_EINT_GROUP2_NR (8) +#define IRQ_EINT_GROUP5_NR (7) +#define IRQ_EINT_GROUP6_NR (10) +/* Actually, #0, #1 and #2 are missing in the EINT_GROUP8 */ +#define IRQ_EINT_GROUP8_NR (11) + +#define IRQ_EINT_GROUP_BASE S5P_EINT(16) +#define IRQ_EINT_GROUP1_BASE (IRQ_EINT_GROUP_BASE + 0) +#define IRQ_EINT_GROUP2_BASE (IRQ_EINT_GROUP1_BASE + IRQ_EINT_GROUP1_NR) +#define IRQ_EINT_GROUP5_BASE (IRQ_EINT_GROUP2_BASE + IRQ_EINT_GROUP2_NR) +#define IRQ_EINT_GROUP6_BASE (IRQ_EINT_GROUP5_BASE + IRQ_EINT_GROUP5_NR) +#define IRQ_EINT_GROUP8_BASE (IRQ_EINT_GROUP6_BASE + IRQ_EINT_GROUP6_NR) + +#define IRQ_EINT_GROUP(grp, x) (IRQ_EINT_GROUP##grp##_BASE + (x)) + +/* Set the default NR_IRQS */ + +#define NR_IRQS (IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR + 1) + +#endif /* __ASM_ARCH_S5P_IRQS_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/map.h b/arch/arm/mach-s5p6440/include/mach/map.h new file mode 100644 index 00000000000..8924e5a4d6a --- /dev/null +++ b/arch/arm/mach-s5p6440/include/mach/map.h @@ -0,0 +1,68 @@ +/* linux/arch/arm/mach-s5p6440/include/mach/map.h + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P6440 - Memory map definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_MAP_H +#define __ASM_ARCH_MAP_H __FILE__ + +#include <plat/map-base.h> +#include <plat/map-s5p.h> + +#define S5P6440_PA_CHIPID (0xE0000000) +#define S5P_PA_CHIPID S5P6440_PA_CHIPID + +#define S5P6440_PA_SYSCON (0xE0100000) +#define S5P6440_PA_CLK (S5P6440_PA_SYSCON + 0x0) +#define S5P_PA_SYSCON S5P6440_PA_SYSCON + +#define S5P6440_PA_GPIO (0xE0308000) +#define S5P_PA_GPIO S5P6440_PA_GPIO + +#define S5P6440_PA_VIC0 (0xE4000000) +#define S5P_PA_VIC0 S5P6440_PA_VIC0 + +#define S5P6440_PA_VIC1 (0xE4100000) +#define S5P_PA_VIC1 S5P6440_PA_VIC1 + +#define S5P6440_PA_TIMER (0xEA000000) +#define S5P_PA_TIMER S5P6440_PA_TIMER + +#define S5P6440_PA_RTC (0xEA100000) +#define S5P_PA_RTC S5P6440_PA_RTC + +#define S5P6440_PA_WDT (0xEA200000) +#define S5P_PA_WDT S5P6440_PA_WDT + +#define S5P6440_PA_UART (0xEC000000) + +#define S5P_PA_UART0 (S5P6440_PA_UART + 0x0) +#define S5P_PA_UART1 (S5P6440_PA_UART + 0x400) +#define S5P_PA_UART2 (S5P6440_PA_UART + 0x800) +#define S5P_PA_UART3 (S5P6440_PA_UART + 0xC00) + +#define S5P_SZ_UART SZ_256 + +#define S5P6440_PA_IIC0 (0xEC104000) + +#define S5P6440_PA_HSOTG (0xED100000) + +#define S5P6440_PA_HSMMC0 (0xED800000) +#define S5P6440_PA_HSMMC1 (0xED900000) +#define S5P6440_PA_HSMMC2 (0xEDA00000) + +#define S5P6440_PA_SDRAM (0x20000000) +#define S5P_PA_SDRAM S5P6440_PA_SDRAM + +/* compatibiltiy defines. */ +#define S3C_PA_UART S5P6440_PA_UART +#define S3C_PA_IIC S5P6440_PA_IIC0 + +#endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/memory.h b/arch/arm/mach-s5p6440/include/mach/memory.h new file mode 100644 index 00000000000..d62910c71b5 --- /dev/null +++ b/arch/arm/mach-s5p6440/include/mach/memory.h @@ -0,0 +1,19 @@ +/* linux/arch/arm/mach-s5p6440/include/mach/memory.h + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P6440 - Memory definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +#define PHYS_OFFSET UL(0x20000000) +#define CONSISTENT_DMA_SIZE SZ_8M + +#endif /* __ASM_ARCH_MEMORY_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/pwm-clock.h b/arch/arm/mach-s5p6440/include/mach/pwm-clock.h new file mode 100644 index 00000000000..c4bb7c55547 --- /dev/null +++ b/arch/arm/mach-s5p6440/include/mach/pwm-clock.h @@ -0,0 +1,62 @@ +/* linux/arch/arm/mach-s5p6440/include/mach/pwm-clock.h + * + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * Copyright 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P6440 - pwm clock and timer support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/** + * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk + * @cfg: The timer TCFG1 register bits shifted down to 0. + * + * Return true if the given configuration from TCFG1 is a TCLK instead + * any of the TDIV clocks. + */ +static inline int pwm_cfg_src_is_tclk(unsigned long tcfg) +{ + return tcfg == S3C2410_TCFG1_MUX_TCLK; +} + +/** + * tcfg_to_divisor() - convert tcfg1 setting to a divisor + * @tcfg1: The tcfg1 setting, shifted down. + * + * Get the divisor value for the given tcfg1 setting. We assume the + * caller has already checked to see if this is not a TCLK source. + */ +static inline unsigned long tcfg_to_divisor(unsigned long tcfg1) +{ + return 1 << (1 + tcfg1); +} + +/** + * pwm_tdiv_has_div1() - does the tdiv setting have a /1 + * + * Return true if we have a /1 in the tdiv setting. + */ +static inline unsigned int pwm_tdiv_has_div1(void) +{ + return 0; +} + +/** + * pwm_tdiv_div_bits() - calculate TCFG1 divisor value. + * @div: The divisor to calculate the bit information for. + * + * Turn a divisor into the necessary bit field for TCFG1. + */ +static inline unsigned long pwm_tdiv_div_bits(unsigned int div) +{ + return ilog2(div) - 1; +} + +#define S3C_TCFG1_MUX_TCLK S3C2410_TCFG1_MUX_TCLK diff --git a/arch/arm/mach-s5p6440/include/mach/regs-clock.h b/arch/arm/mach-s5p6440/include/mach/regs-clock.h new file mode 100644 index 00000000000..c783ecc9f19 --- /dev/null +++ b/arch/arm/mach-s5p6440/include/mach/regs-clock.h @@ -0,0 +1,130 @@ +/* linux/arch/arm/mach-s5p6440/include/mach/regs-clock.h + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P6440 - Clock register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_REGS_CLOCK_H +#define __ASM_ARCH_REGS_CLOCK_H __FILE__ + +#include <mach/map.h> + +#define S5P_CLKREG(x) (S3C_VA_SYS + (x)) + +#define S5P_APLL_LOCK S5P_CLKREG(0x00) +#define S5P_MPLL_LOCK S5P_CLKREG(0x04) +#define S5P_EPLL_LOCK S5P_CLKREG(0x08) +#define S5P_APLL_CON S5P_CLKREG(0x0C) +#define S5P_MPLL_CON S5P_CLKREG(0x10) +#define S5P_EPLL_CON S5P_CLKREG(0x14) +#define S5P_EPLL_CON_K S5P_CLKREG(0x18) +#define S5P_CLK_SRC0 S5P_CLKREG(0x1C) +#define S5P_CLK_DIV0 S5P_CLKREG(0x20) +#define S5P_CLK_DIV1 S5P_CLKREG(0x24) +#define S5P_CLK_DIV2 S5P_CLKREG(0x28) +#define S5P_CLK_OUT S5P_CLKREG(0x2C) +#define S5P_CLK_GATE_HCLK0 S5P_CLKREG(0x30) +#define S5P_CLK_GATE_PCLK S5P_CLKREG(0x34) +#define S5P_CLK_GATE_SCLK0 S5P_CLKREG(0x38) +#define S5P_CLK_GATE_MEM0 S5P_CLKREG(0x3C) +#define S5P_CLK_DIV3 S5P_CLKREG(0x40) +#define S5P_CLK_GATE_HCLK1 S5P_CLKREG(0x44) +#define S5P_CLK_GATE_SCLK1 S5P_CLKREG(0x48) +#define S5P_AHB_CON0 S5P_CLKREG(0x100) +#define S5P_CLK_SRC1 S5P_CLKREG(0x10C) +#define S5P_SWRESET S5P_CLKREG(0x114) +#define S5P_SYS_ID S5P_CLKREG(0x118) +#define S5P_SYS_OTHERS S5P_CLKREG(0x11C) +#define S5P_MEM_CFG_STAT S5P_CLKREG(0x12C) +#define S5P_PWR_CFG S5P_CLKREG(0x804) +#define S5P_EINT_WAKEUP_MASK S5P_CLKREG(0x808) +#define S5P_NORMAL_CFG S5P_CLKREG(0x810) +#define S5P_STOP_CFG S5P_CLKREG(0x814) +#define S5P_SLEEP_CFG S5P_CLKREG(0x818) +#define S5P_OSC_FREQ S5P_CLKREG(0x820) +#define S5P_OSC_STABLE S5P_CLKREG(0x824) +#define S5P_PWR_STABLE S5P_CLKREG(0x828) +#define S5P_MTC_STABLE S5P_CLKREG(0x830) +#define S5P_OTHERS S5P_CLKREG(0x900) +#define S5P_RST_STAT S5P_CLKREG(0x904) +#define S5P_WAKEUP_STAT S5P_CLKREG(0x908) +#define S5P_SLPEN S5P_CLKREG(0x930) +#define S5P_INFORM0 S5P_CLKREG(0xA00) +#define S5P_INFORM1 S5P_CLKREG(0xA04) +#define S5P_INFORM2 S5P_CLKREG(0xA08) +#define S5P_INFORM3 S5P_CLKREG(0xA0C) + +/* CLKDIV0 */ +#define S5P_CLKDIV0_PCLK_MASK (0xf << 12) +#define S5P_CLKDIV0_PCLK_SHIFT (12) +#define S5P_CLKDIV0_HCLK_MASK (0xf << 8) +#define S5P_CLKDIV0_HCLK_SHIFT (8) +#define S5P_CLKDIV0_MPLL_MASK (0x1 << 4) +#define S5P_CLKDIV0_ARM_MASK (0xf << 0) +#define S5P_CLKDIV0_ARM_SHIFT (0) + +/* CLKDIV3 */ +#define S5P_CLKDIV3_PCLK_LOW_MASK (0xf << 12) +#define S5P_CLKDIV3_PCLK_LOW_SHIFT (12) +#define S5P_CLKDIV3_HCLK_LOW_MASK (0xf << 8) +#define S5P_CLKDIV3_HCLK_LOW_SHIFT (8) + +/* HCLK0 GATE Registers */ +#define S5P_CLKCON_HCLK0_USB (1<<20) +#define S5P_CLKCON_HCLK0_HSMMC2 (1<<19) +#define S5P_CLKCON_HCLK0_HSMMC1 (1<<18) +#define S5P_CLKCON_HCLK0_HSMMC0 (1<<17) +#define S5P_CLKCON_HCLK0_POST0 (1<<5) + +/* HCLK1 GATE Registers */ +#define S5P_CLKCON_HCLK1_DISPCON (1<<1) + +/* PCLK GATE Registers */ +#define S5P_CLKCON_PCLK_IIS2 (1<<26) +#define S5P_CLKCON_PCLK_SPI1 (1<<22) +#define S5P_CLKCON_PCLK_SPI0 (1<<21) +#define S5P_CLKCON_PCLK_GPIO (1<<18) +#define S5P_CLKCON_PCLK_IIC0 (1<<17) +#define S5P_CLKCON_PCLK_TSADC (1<<12) +#define S5P_CLKCON_PCLK_PWM (1<<7) +#define S5P_CLKCON_PCLK_RTC (1<<6) +#define S5P_CLKCON_PCLK_WDT (1<<5) +#define S5P_CLKCON_PCLK_UART3 (1<<4) +#define S5P_CLKCON_PCLK_UART2 (1<<3) +#define S5P_CLKCON_PCLK_UART1 (1<<2) +#define S5P_CLKCON_PCLK_UART0 (1<<1) + +/* SCLK0 GATE Registers */ +#define S5P_CLKCON_SCLK0_MMC2_48 (1<<29) +#define S5P_CLKCON_SCLK0_MMC1_48 (1<<28) +#define S5P_CLKCON_SCLK0_MMC0_48 (1<<27) +#define S5P_CLKCON_SCLK0_MMC2 (1<<26) +#define S5P_CLKCON_SCLK0_MMC1 (1<<25) +#define S5P_CLKCON_SCLK0_MMC0 (1<<24) +#define S5P_CLKCON_SCLK0_SPI1_48 (1<<23) +#define S5P_CLKCON_SCLK0_SPI0_48 (1<<22) +#define S5P_CLKCON_SCLK0_SPI1 (1<<21) +#define S5P_CLKCON_SCLK0_SPI0 (1<<20) +#define S5P_CLKCON_SCLK0_UART (1<<5) + +/* SCLK1 GATE Registers */ + +/* MEM0 GATE Registers */ +#define S5P_CLKCON_MEM0_HCLK_NFCON (1<<2) + +/*OTHERS Resgister */ +#define S5P_OTHERS_USB_SIG_MASK (1<<16) +#define S5P_OTHERS_HCLK_LOW_SEL_MPLL (1<<6) + +/* Compatibility defines */ +#define ARM_CLK_DIV S5P_CLK_DIV0 +#define ARM_DIV_RATIO_SHIFT 0 +#define ARM_DIV_MASK (0xf << ARM_DIV_RATIO_SHIFT) + +#endif /* __ASM_ARCH_REGS_CLOCK_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/regs-gpio.h b/arch/arm/mach-s5p6440/include/mach/regs-gpio.h new file mode 100644 index 00000000000..82ff753913d --- /dev/null +++ b/arch/arm/mach-s5p6440/include/mach/regs-gpio.h @@ -0,0 +1,54 @@ +/* linux/arch/arm/mach-s5p6440/include/mach/regs-gpio.h + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P6440 - GPIO register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_REGS_GPIO_H +#define __ASM_ARCH_REGS_GPIO_H __FILE__ + +#include <mach/map.h> + +/* Base addresses for each of the banks */ +#define S5P6440_GPA_BASE (S5P_VA_GPIO + 0x0000) +#define S5P6440_GPB_BASE (S5P_VA_GPIO + 0x0020) +#define S5P6440_GPC_BASE (S5P_VA_GPIO + 0x0040) +#define S5P6440_GPF_BASE (S5P_VA_GPIO + 0x00A0) +#define S5P6440_GPG_BASE (S5P_VA_GPIO + 0x00C0) +#define S5P6440_GPH_BASE (S5P_VA_GPIO + 0x00E0) +#define S5P6440_GPI_BASE (S5P_VA_GPIO + 0x0100) +#define S5P6440_GPJ_BASE (S5P_VA_GPIO + 0x0120) +#define S5P6440_GPN_BASE (S5P_VA_GPIO + 0x0830) +#define S5P6440_GPP_BASE (S5P_VA_GPIO + 0x0160) +#define S5P6440_GPR_BASE (S5P_VA_GPIO + 0x0290) +#define S5P6440_EINT0CON0 (S5P_VA_GPIO + 0x900) +#define S5P6440_EINT0FLTCON0 (S5P_VA_GPIO + 0x910) +#define S5P6440_EINT0FLTCON1 (S5P_VA_GPIO + 0x914) +#define S5P6440_EINT0MASK (S5P_VA_GPIO + 0x920) +#define S5P6440_EINT0PEND (S5P_VA_GPIO + 0x924) + +/* for LCD */ +#define S5P6440_SPCON_LCD_SEL_RGB (1 << 0) +#define S5P6440_SPCON_LCD_SEL_MASK (3 << 0) + +/* These set of macros are not really useful for the + * GPF/GPI/GPJ/GPN/GPP, + * useful for others set of GPIO's (4 bit) + */ +#define S5P6440_GPIO_CONMASK(__gpio) (0xf << ((__gpio) * 4)) +#define S5P6440_GPIO_INPUT(__gpio) (0x0 << ((__gpio) * 4)) +#define S5P6440_GPIO_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) + +/* Use these macros for GPF/GPI/GPJ/GPN/GPP set of GPIO (2 bit) + * */ +#define S5P6440_GPIO2_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) +#define S5P6440_GPIO2_INPUT(__gpio) (0x0 << ((__gpio) * 2)) +#define S5P6440_GPIO2_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) + +#endif /* __ASM_ARCH_REGS_GPIO_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/regs-irq.h b/arch/arm/mach-s5p6440/include/mach/regs-irq.h new file mode 100644 index 00000000000..a961f4beeb0 --- /dev/null +++ b/arch/arm/mach-s5p6440/include/mach/regs-irq.h @@ -0,0 +1,19 @@ +/* linux/arch/arm/mach-s5p6440/include/mach/regs-irq.h + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P6440 - IRQ register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_REGS_IRQ_H +#define __ASM_ARCH_REGS_IRQ_H __FILE__ + +#include <asm/hardware/vic.h> +#include <mach/map.h> + +#endif /* __ASM_ARCH_REGS_IRQ_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/system.h b/arch/arm/mach-s5p6440/include/mach/system.h new file mode 100644 index 00000000000..d2dd817da66 --- /dev/null +++ b/arch/arm/mach-s5p6440/include/mach/system.h @@ -0,0 +1,26 @@ +/* linux/arch/arm/mach-s5p6440/include/mach/system.h + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P6440 - system support header + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H __FILE__ + +static void arch_idle(void) +{ + /* nothing here yet */ +} + +static void arch_reset(char mode, const char *cmd) +{ + /* nothing here yet */ +} + +#endif /* __ASM_ARCH_SYSTEM_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/tick.h b/arch/arm/mach-s5p6440/include/mach/tick.h new file mode 100644 index 00000000000..2f25c7f0797 --- /dev/null +++ b/arch/arm/mach-s5p6440/include/mach/tick.h @@ -0,0 +1,24 @@ +/* linux/arch/arm/mach-s5p6440/include/mach/tick.h + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P6440 - Timer tick support definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_TICK_H +#define __ASM_ARCH_TICK_H __FILE__ + +static inline u32 s3c24xx_ostimer_pending(void) +{ + u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS); + return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0))); +} + +#define TICK_MAX (0xffffffff) + +#endif /* __ASM_ARCH_TICK_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/timex.h b/arch/arm/mach-s5p6440/include/mach/timex.h new file mode 100644 index 00000000000..fb2e8cd4082 --- /dev/null +++ b/arch/arm/mach-s5p6440/include/mach/timex.h @@ -0,0 +1,24 @@ +/* arch/arm/mach-s3c64xx/include/mach/timex.h + * + * Copyright (c) 2003-2005 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C6400 - time parameters + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_TIMEX_H +#define __ASM_ARCH_TIMEX_H + +/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it + * a variable is useless. It seems as long as we make our timers an + * exact multiple of HZ, any value that makes a 1->1 correspondence + * for the time conversion functions to/from jiffies is acceptable. +*/ + +#define CLOCK_TICK_RATE 12000000 + +#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/uncompress.h b/arch/arm/mach-s5p6440/include/mach/uncompress.h new file mode 100644 index 00000000000..7c1f600d65c --- /dev/null +++ b/arch/arm/mach-s5p6440/include/mach/uncompress.h @@ -0,0 +1,24 @@ +/* linux/arch/arm/mach-s5p6440/include/mach/uncompress.h + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P6440 - uncompress code + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_UNCOMPRESS_H +#define __ASM_ARCH_UNCOMPRESS_H + +#include <mach/map.h> +#include <plat/uncompress.h> + +static void arch_detect_cpu(void) +{ + /* we do not need to do any cpu detection here at the moment. */ +} + +#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/vmalloc.h b/arch/arm/mach-s5p6440/include/mach/vmalloc.h new file mode 100644 index 00000000000..16df257b1dc --- /dev/null +++ b/arch/arm/mach-s5p6440/include/mach/vmalloc.h @@ -0,0 +1,17 @@ +/* arch/arm/mach-s5p6440/include/mach/vmalloc.h + * + * Copyright 2010 Ben Dooks <ben-linux@fluff.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C6400 vmalloc definition +*/ + +#ifndef __ASM_ARCH_VMALLOC_H +#define __ASM_ARCH_VMALLOC_H + +#define VMALLOC_END (0xE0000000) + +#endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/arch/arm/mach-s5p6440/init.c b/arch/arm/mach-s5p6440/init.c new file mode 100644 index 00000000000..a1f3727e402 --- /dev/null +++ b/arch/arm/mach-s5p6440/init.c @@ -0,0 +1,52 @@ +/* linux/arch/arm/mach-s5p6440/init.c + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P6440 - Init support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/serial_core.h> + +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/s5p6440.h> +#include <plat/regs-serial.h> + +static struct s3c24xx_uart_clksrc s5p6440_serial_clocks[] = { + [0] = { + .name = "pclk_low", + .divisor = 1, + .min_baud = 0, + .max_baud = 0, + }, + [1] = { + .name = "uclk1", + .divisor = 1, + .min_baud = 0, + .max_baud = 0, + }, +}; + +/* uart registration process */ +void __init s5p6440_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) +{ + struct s3c2410_uartcfg *tcfg = cfg; + u32 ucnt; + + for (ucnt = 0; ucnt < no; ucnt++, tcfg++) { + if (!tcfg->clocks) { + tcfg->clocks = s5p6440_serial_clocks; + tcfg->clocks_size = ARRAY_SIZE(s5p6440_serial_clocks); + } + } + + s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no); +} diff --git a/arch/arm/mach-s5p6440/mach-smdk6440.c b/arch/arm/mach-s5p6440/mach-smdk6440.c new file mode 100644 index 00000000000..3ae88f2c7c7 --- /dev/null +++ b/arch/arm/mach-s5p6440/mach-smdk6440.c @@ -0,0 +1,111 @@ +/* linux/arch/arm/mach-s5p6440/mach-smdk6440.c + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/serial_core.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/clk.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <mach/hardware.h> +#include <mach/map.h> + +#include <asm/irq.h> +#include <asm/mach-types.h> + +#include <plat/regs-serial.h> + +#include <plat/s5p6440.h> +#include <plat/clock.h> +#include <mach/regs-clock.h> +#include <plat/devs.h> +#include <plat/cpu.h> +#include <plat/pll.h> + +#define S5P6440_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI | \ + S3C2443_UCON_RXERR_IRQEN) + +#define S5P6440_ULCON_DEFAULT S3C2410_LCON_CS8 + +#define S5P6440_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S3C2440_UFCON_TXTRIG16 | \ + S3C2410_UFCON_RXTRIG8) + +static struct s3c2410_uartcfg smdk6440_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = S5P6440_UCON_DEFAULT, + .ulcon = S5P6440_ULCON_DEFAULT, + .ufcon = S5P6440_UFCON_DEFAULT, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = S5P6440_UCON_DEFAULT, + .ulcon = S5P6440_ULCON_DEFAULT, + .ufcon = S5P6440_UFCON_DEFAULT, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = S5P6440_UCON_DEFAULT, + .ulcon = S5P6440_ULCON_DEFAULT, + .ufcon = S5P6440_UFCON_DEFAULT, + }, + [3] = { + .hwport = 3, + .flags = 0, + .ucon = S5P6440_UCON_DEFAULT, + .ulcon = S5P6440_ULCON_DEFAULT, + .ufcon = S5P6440_UFCON_DEFAULT, + }, +}; + +static struct platform_device *smdk6440_devices[] __initdata = { +}; + +static void __init smdk6440_map_io(void) +{ + s5p_init_io(NULL, 0, S5P_SYS_ID); + s3c24xx_init_clocks(12000000); + s3c24xx_init_uarts(smdk6440_uartcfgs, ARRAY_SIZE(smdk6440_uartcfgs)); +} + +static void __init smdk6440_machine_init(void) +{ + platform_add_devices(smdk6440_devices, ARRAY_SIZE(smdk6440_devices)); +} + +MACHINE_START(SMDK6440, "SMDK6440") + /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ + .phys_io = S3C_PA_UART & 0xfff00000, + .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, + .boot_params = S5P_PA_SDRAM + 0x100, + + .init_irq = s5p6440_init_irq, + .map_io = smdk6440_map_io, + .init_machine = smdk6440_machine_init, + .timer = &s3c24xx_timer, +MACHINE_END diff --git a/arch/arm/mach-s5p6442/Kconfig b/arch/arm/mach-s5p6442/Kconfig new file mode 100644 index 00000000000..4f3f6de6a01 --- /dev/null +++ b/arch/arm/mach-s5p6442/Kconfig @@ -0,0 +1,24 @@ +# arch/arm/mach-s5p6442/Kconfig +# +# Copyright (c) 2010 Samsung Electronics Co., Ltd. +# http://www.samsung.com/ +# +# Licensed under GPLv2 + +# Configuration options for the S5P6442 + +if ARCH_S5P6442 + +config CPU_S5P6442 + bool + select PLAT_S5P + help + Enable S5P6442 CPU support + +config MACH_SMDK6442 + bool "SMDK6442" + select CPU_S5P6442 + help + Machine support for Samsung SMDK6442 + +endif diff --git a/arch/arm/mach-s5p6442/Makefile b/arch/arm/mach-s5p6442/Makefile new file mode 100644 index 00000000000..dde39a6ce6b --- /dev/null +++ b/arch/arm/mach-s5p6442/Makefile @@ -0,0 +1,19 @@ +# arch/arm/mach-s5p6442/Makefile +# +# Copyright (c) 2010 Samsung Electronics Co., Ltd. +# http://www.samsung.com/ +# +# Licensed under GPLv2 + +obj-y := +obj-m := +obj-n := +obj- := + +# Core support for S5P6442 system + +obj-$(CONFIG_CPU_S5P6442) += cpu.o init.o clock.o + +# machine support + +obj-$(CONFIG_MACH_SMDK6442) += mach-smdk6442.o diff --git a/arch/arm/mach-s5p6442/Makefile.boot b/arch/arm/mach-s5p6442/Makefile.boot new file mode 100644 index 00000000000..ff90aa13bd6 --- /dev/null +++ b/arch/arm/mach-s5p6442/Makefile.boot @@ -0,0 +1,2 @@ + zreladdr-y := 0x20008000 +params_phys-y := 0x20000100 diff --git a/arch/arm/mach-s5p6442/clock.c b/arch/arm/mach-s5p6442/clock.c new file mode 100644 index 00000000000..3aadbf42c11 --- /dev/null +++ b/arch/arm/mach-s5p6442/clock.c @@ -0,0 +1,396 @@ +/* linux/arch/arm/mach-s5p6442/clock.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P6442 - Clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> + +#include <mach/map.h> + +#include <plat/cpu-freq.h> +#include <mach/regs-clock.h> +#include <plat/clock.h> +#include <plat/cpu.h> +#include <plat/pll.h> +#include <plat/s5p-clock.h> +#include <plat/clock-clksrc.h> +#include <plat/s5p6442.h> + +static struct clksrc_clk clk_mout_apll = { + .clk = { + .name = "mout_apll", + .id = -1, + }, + .sources = &clk_src_apll, + .reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 }, +}; + +static struct clksrc_clk clk_mout_mpll = { + .clk = { + .name = "mout_mpll", + .id = -1, + }, + .sources = &clk_src_mpll, + .reg_src = { .reg = S5P_CLK_SRC0, .shift = 4, .size = 1 }, +}; + +static struct clksrc_clk clk_mout_epll = { + .clk = { + .name = "mout_epll", + .id = -1, + }, + .sources = &clk_src_epll, + .reg_src = { .reg = S5P_CLK_SRC0, .shift = 8, .size = 1 }, +}; + +/* Possible clock sources for ARM Mux */ +static struct clk *clk_src_arm_list[] = { + [1] = &clk_mout_apll.clk, + [2] = &clk_mout_mpll.clk, +}; + +static struct clksrc_sources clk_src_arm = { + .sources = clk_src_arm_list, + .nr_sources = ARRAY_SIZE(clk_src_arm_list), +}; + +static struct clksrc_clk clk_mout_arm = { + .clk = { + .name = "mout_arm", + .id = -1, + }, + .sources = &clk_src_arm, + .reg_src = { .reg = S5P_CLK_MUX_STAT0, .shift = 16, .size = 3 }, +}; + +static struct clk clk_dout_a2m = { + .name = "dout_a2m", + .id = -1, + .parent = &clk_mout_apll.clk, +}; + +/* Possible clock sources for D0 Mux */ +static struct clk *clk_src_d0_list[] = { + [1] = &clk_mout_mpll.clk, + [2] = &clk_dout_a2m, +}; + +static struct clksrc_sources clk_src_d0 = { + .sources = clk_src_d0_list, + .nr_sources = ARRAY_SIZE(clk_src_d0_list), +}; + +static struct clksrc_clk clk_mout_d0 = { + .clk = { + .name = "mout_d0", + .id = -1, + }, + .sources = &clk_src_d0, + .reg_src = { .reg = S5P_CLK_MUX_STAT0, .shift = 20, .size = 3 }, +}; + +static struct clk clk_dout_apll = { + .name = "dout_apll", + .id = -1, + .parent = &clk_mout_arm.clk, +}; + +/* Possible clock sources for D0SYNC Mux */ +static struct clk *clk_src_d0sync_list[] = { + [1] = &clk_mout_d0.clk, + [2] = &clk_dout_apll, +}; + +static struct clksrc_sources clk_src_d0sync = { + .sources = clk_src_d0sync_list, + .nr_sources = ARRAY_SIZE(clk_src_d0sync_list), +}; + +static struct clksrc_clk clk_mout_d0sync = { + .clk = { + .name = "mout_d0sync", + .id = -1, + }, + .sources = &clk_src_d0sync, + .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 28, .size = 3 }, +}; + +/* Possible clock sources for D1 Mux */ +static struct clk *clk_src_d1_list[] = { + [1] = &clk_mout_mpll.clk, + [2] = &clk_dout_a2m, +}; + +static struct clksrc_sources clk_src_d1 = { + .sources = clk_src_d1_list, + .nr_sources = ARRAY_SIZE(clk_src_d1_list), +}; + +static struct clksrc_clk clk_mout_d1 = { + .clk = { + .name = "mout_d1", + .id = -1, + }, + .sources = &clk_src_d1, + .reg_src = { .reg = S5P_CLK_MUX_STAT0, .shift = 24, .size = 3 }, +}; + +/* Possible clock sources for D1SYNC Mux */ +static struct clk *clk_src_d1sync_list[] = { + [1] = &clk_mout_d1.clk, + [2] = &clk_dout_apll, +}; + +static struct clksrc_sources clk_src_d1sync = { + .sources = clk_src_d1sync_list, + .nr_sources = ARRAY_SIZE(clk_src_d1sync_list), +}; + +static struct clksrc_clk clk_mout_d1sync = { + .clk = { + .name = "mout_d1sync", + .id = -1, + }, + .sources = &clk_src_d1sync, + .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 24, .size = 3 }, +}; + +static struct clk clk_hclkd0 = { + .name = "hclkd0", + .id = -1, + .parent = &clk_mout_d0sync.clk, +}; + +static struct clk clk_hclkd1 = { + .name = "hclkd1", + .id = -1, + .parent = &clk_mout_d1sync.clk, +}; + +static struct clk clk_pclkd0 = { + .name = "pclkd0", + .id = -1, + .parent = &clk_hclkd0, +}; + +static struct clk clk_pclkd1 = { + .name = "pclkd1", + .id = -1, + .parent = &clk_hclkd1, +}; + +int s5p6442_clk_ip3_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKGATE_IP3, clk, enable); +} + +static struct clksrc_clk clksrcs[] = { + { + .clk = { + .name = "dout_a2m", + .id = -1, + .parent = &clk_mout_apll.clk, + }, + .sources = &clk_src_apll, + .reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 }, + .reg_div = { .reg = S5P_CLK_DIV0, .shift = 4, .size = 3 }, + }, { + .clk = { + .name = "dout_apll", + .id = -1, + .parent = &clk_mout_arm.clk, + }, + .sources = &clk_src_arm, + .reg_src = { .reg = S5P_CLK_MUX_STAT0, .shift = 16, .size = 3 }, + .reg_div = { .reg = S5P_CLK_DIV0, .shift = 0, .size = 3 }, + }, { + .clk = { + .name = "hclkd1", + .id = -1, + .parent = &clk_mout_d1sync.clk, + }, + .sources = &clk_src_d1sync, + .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 24, .size = 3 }, + .reg_div = { .reg = S5P_CLK_DIV0, .shift = 24, .size = 4 }, + }, { + .clk = { + .name = "hclkd0", + .id = -1, + .parent = &clk_mout_d0sync.clk, + }, + .sources = &clk_src_d0sync, + .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 28, .size = 3 }, + .reg_div = { .reg = S5P_CLK_DIV0, .shift = 16, .size = 4 }, + }, { + .clk = { + .name = "pclkd0", + .id = -1, + .parent = &clk_hclkd0, + }, + .sources = &clk_src_d0sync, + .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 28, .size = 3 }, + .reg_div = { .reg = S5P_CLK_DIV0, .shift = 20, .size = 3 }, + }, { + .clk = { + .name = "pclkd1", + .id = -1, + .parent = &clk_hclkd1, + }, + .sources = &clk_src_d1sync, + .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 24, .size = 3 }, + .reg_div = { .reg = S5P_CLK_DIV0, .shift = 28, .size = 3 }, + } +}; + +/* Clock initialisation code */ +static struct clksrc_clk *init_parents[] = { + &clk_mout_apll, + &clk_mout_mpll, + &clk_mout_epll, + &clk_mout_arm, + &clk_mout_d0, + &clk_mout_d0sync, + &clk_mout_d1, + &clk_mout_d1sync, +}; + +void __init_or_cpufreq s5p6442_setup_clocks(void) +{ + struct clk *pclkd0_clk; + struct clk *pclkd1_clk; + + unsigned long xtal; + unsigned long arm; + unsigned long hclkd0 = 0; + unsigned long hclkd1 = 0; + unsigned long pclkd0 = 0; + unsigned long pclkd1 = 0; + + unsigned long apll; + unsigned long mpll; + unsigned long epll; + unsigned int ptr; + + printk(KERN_DEBUG "%s: registering clocks\n", __func__); + + xtal = clk_get_rate(&clk_xtal); + + printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal); + + apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4508); + mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502); + epll = s5p_get_pll45xx(xtal, __raw_readl(S5P_EPLL_CON), pll_4500); + + printk(KERN_INFO "S5P6440: PLL settings, A=%ld, M=%ld, E=%ld", + apll, mpll, epll); + + clk_fout_apll.rate = apll; + clk_fout_mpll.rate = mpll; + clk_fout_epll.rate = epll; + + for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++) + s3c_set_clksrc(init_parents[ptr], true); + + for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) + s3c_set_clksrc(&clksrcs[ptr], true); + + arm = clk_get_rate(&clk_dout_apll); + hclkd0 = clk_get_rate(&clk_hclkd0); + hclkd1 = clk_get_rate(&clk_hclkd1); + + pclkd0_clk = clk_get(NULL, "pclkd0"); + BUG_ON(IS_ERR(pclkd0_clk)); + + pclkd0 = clk_get_rate(pclkd0_clk); + clk_put(pclkd0_clk); + + pclkd1_clk = clk_get(NULL, "pclkd1"); + BUG_ON(IS_ERR(pclkd1_clk)); + + pclkd1 = clk_get_rate(pclkd1_clk); + clk_put(pclkd1_clk); + + printk(KERN_INFO "S5P6442: HCLKD0=%ld, HCLKD1=%ld, PCLKD0=%ld, PCLKD1=%ld\n", + hclkd0, hclkd1, pclkd0, pclkd1); + + /* For backward compatibility */ + clk_f.rate = arm; + clk_h.rate = hclkd1; + clk_p.rate = pclkd1; + + clk_pclkd0.rate = pclkd0; + clk_pclkd1.rate = pclkd1; +} + +static struct clk init_clocks[] = { + { + .name = "systimer", + .id = -1, + .parent = &clk_pclkd1, + .enable = s5p6442_clk_ip3_ctrl, + .ctrlbit = (1<<16), + }, { + .name = "uart", + .id = 0, + .parent = &clk_pclkd1, + .enable = s5p6442_clk_ip3_ctrl, + .ctrlbit = (1<<17), + }, { + .name = "uart", + .id = 1, + .parent = &clk_pclkd1, + .enable = s5p6442_clk_ip3_ctrl, + .ctrlbit = (1<<18), + }, { + .name = "uart", + .id = 2, + .parent = &clk_pclkd1, + .enable = s5p6442_clk_ip3_ctrl, + .ctrlbit = (1<<19), + }, { + .name = "timers", + .id = -1, + .parent = &clk_pclkd1, + .enable = s5p6442_clk_ip3_ctrl, + .ctrlbit = (1<<23), + }, +}; + +static struct clk *clks[] __initdata = { + &clk_ext, + &clk_epll, + &clk_mout_apll.clk, + &clk_mout_mpll.clk, + &clk_mout_epll.clk, + &clk_mout_d0.clk, + &clk_mout_d0sync.clk, + &clk_mout_d1.clk, + &clk_mout_d1sync.clk, + &clk_hclkd0, + &clk_pclkd0, + &clk_hclkd1, + &clk_pclkd1, +}; + +void __init s5p6442_register_clocks(void) +{ + s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); + + s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); + s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); + + s3c_pwmclk_init(); +} diff --git a/arch/arm/mach-s5p6442/cpu.c b/arch/arm/mach-s5p6442/cpu.c new file mode 100644 index 00000000000..bc2524df89b --- /dev/null +++ b/arch/arm/mach-s5p6442/cpu.c @@ -0,0 +1,121 @@ +/* linux/arch/arm/mach-s5p6442/cpu.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/sysdev.h> +#include <linux/serial_core.h> +#include <linux/platform_device.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <asm/proc-fns.h> + +#include <mach/hardware.h> +#include <mach/map.h> +#include <asm/irq.h> + +#include <plat/regs-serial.h> +#include <mach/regs-clock.h> + +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/clock.h> +#include <plat/s5p6442.h> + +/* Initial IO mappings */ + +static struct map_desc s5p6442_iodesc[] __initdata = { + { + .virtual = (unsigned long)S5P_VA_SYSTIMER, + .pfn = __phys_to_pfn(S5P6442_PA_SYSTIMER), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)VA_VIC2, + .pfn = __phys_to_pfn(S5P6442_PA_VIC2), + .length = SZ_16K, + .type = MT_DEVICE, + } +}; + +static void s5p6442_idle(void) +{ + if (!need_resched()) + cpu_do_idle(); + + local_irq_enable(); +} + +/* s5p6442_map_io + * + * register the standard cpu IO areas +*/ + +void __init s5p6442_map_io(void) +{ + iotable_init(s5p6442_iodesc, ARRAY_SIZE(s5p6442_iodesc)); +} + +void __init s5p6442_init_clocks(int xtal) +{ + printk(KERN_DEBUG "%s: initializing clocks\n", __func__); + + s3c24xx_register_baseclocks(xtal); + s5p_register_clocks(xtal); + s5p6442_register_clocks(); + s5p6442_setup_clocks(); +} + +void __init s5p6442_init_irq(void) +{ + /* S5P6442 supports 3 VIC */ + u32 vic[3]; + + /* VIC0, VIC1, and VIC2: some interrupt reserved */ + vic[0] = 0x7fefffff; + vic[1] = 0X7f389c81; + vic[2] = 0X1bbbcfff; + + s5p_init_irq(vic, ARRAY_SIZE(vic)); +} + +static struct sysdev_class s5p6442_sysclass = { + .name = "s5p6442-core", +}; + +static struct sys_device s5p6442_sysdev = { + .cls = &s5p6442_sysclass, +}; + +static int __init s5p6442_core_init(void) +{ + return sysdev_class_register(&s5p6442_sysclass); +} + +core_initcall(s5p6442_core_init); + +int __init s5p6442_init(void) +{ + printk(KERN_INFO "S5P6442: Initializing architecture\n"); + + /* set idle function */ + pm_idle = s5p6442_idle; + + return sysdev_register(&s5p6442_sysdev); +} diff --git a/arch/arm/mach-s5p6442/include/mach/debug-macro.S b/arch/arm/mach-s5p6442/include/mach/debug-macro.S new file mode 100644 index 00000000000..1aae691e58e --- /dev/null +++ b/arch/arm/mach-s5p6442/include/mach/debug-macro.S @@ -0,0 +1,36 @@ +/* linux/arch/arm/mach-s5p6442/include/mach/debug-macro.S + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Based on arch/arm/mach-s3c6400/include/mach/debug-macro.S + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* pull in the relevant register and map files. */ + +#include <mach/map.h> +#include <plat/regs-serial.h> + + .macro addruart, rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 + ldreq \rx, = S3C_PA_UART + ldrne \rx, = S3C_VA_UART +#if CONFIG_DEBUG_S3C_UART != 0 + add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART) +#endif + .endm + +#define fifo_full fifo_full_s5pv210 +#define fifo_level fifo_level_s5pv210 + +/* include the reset of the code which will do the work, we're only + * compiling for a single cpu processor type so the default of s3c2440 + * will be fine with us. + */ + +#include <plat/debug-macro.S> diff --git a/arch/arm/mach-s5p6442/include/mach/entry-macro.S b/arch/arm/mach-s5p6442/include/mach/entry-macro.S new file mode 100644 index 00000000000..6d574edbf1a --- /dev/null +++ b/arch/arm/mach-s5p6442/include/mach/entry-macro.S @@ -0,0 +1,48 @@ +/* linux/arch/arm/mach-s5p6442/include/mach/entry-macro.S + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Low-level IRQ helper macros for the Samsung S5P6442 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <asm/hardware/vic.h> +#include <mach/map.h> +#include <plat/irqs.h> + + .macro disable_fiq + .endm + + .macro get_irqnr_preamble, base, tmp + ldr \base, =VA_VIC0 + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + + @ check the vic0 + mov \irqnr, # S5P_IRQ_OFFSET + 31 + ldr \irqstat, [ \base, # VIC_IRQ_STATUS ] + teq \irqstat, #0 + + @ otherwise try vic1 + addeq \tmp, \base, #(VA_VIC1 - VA_VIC0) + addeq \irqnr, \irqnr, #32 + ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ] + teqeq \irqstat, #0 + + @ otherwise try vic2 + addeq \tmp, \base, #(VA_VIC2 - VA_VIC0) + addeq \irqnr, \irqnr, #32 + ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ] + teqeq \irqstat, #0 + + clzne \irqstat, \irqstat + subne \irqnr, \irqnr, \irqstat + .endm diff --git a/arch/arm/mach-s5p6442/include/mach/gpio.h b/arch/arm/mach-s5p6442/include/mach/gpio.h new file mode 100644 index 00000000000..b8715df2fda --- /dev/null +++ b/arch/arm/mach-s5p6442/include/mach/gpio.h @@ -0,0 +1,123 @@ +/* linux/arch/arm/mach-s5p6442/include/mach/gpio.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P6442 - GPIO lib support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_GPIO_H +#define __ASM_ARCH_GPIO_H __FILE__ + +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep +#define gpio_to_irq __gpio_to_irq + +/* GPIO bank sizes */ +#define S5P6442_GPIO_A0_NR (8) +#define S5P6442_GPIO_A1_NR (2) +#define S5P6442_GPIO_B_NR (4) +#define S5P6442_GPIO_C0_NR (5) +#define S5P6442_GPIO_C1_NR (5) +#define S5P6442_GPIO_D0_NR (2) +#define S5P6442_GPIO_D1_NR (6) +#define S5P6442_GPIO_E0_NR (8) +#define S5P6442_GPIO_E1_NR (5) +#define S5P6442_GPIO_F0_NR (8) +#define S5P6442_GPIO_F1_NR (8) +#define S5P6442_GPIO_F2_NR (8) +#define S5P6442_GPIO_F3_NR (6) +#define S5P6442_GPIO_G0_NR (7) +#define S5P6442_GPIO_G1_NR (7) +#define S5P6442_GPIO_G2_NR (7) +#define S5P6442_GPIO_H0_NR (8) +#define S5P6442_GPIO_H1_NR (8) +#define S5P6442_GPIO_H2_NR (8) +#define S5P6442_GPIO_H3_NR (8) +#define S5P6442_GPIO_J0_NR (8) +#define S5P6442_GPIO_J1_NR (6) +#define S5P6442_GPIO_J2_NR (8) +#define S5P6442_GPIO_J3_NR (8) +#define S5P6442_GPIO_J4_NR (5) + +/* GPIO bank numbers */ + +/* CONFIG_S3C_GPIO_SPACE allows the user to select extra + * space for debugging purposes so that any accidental + * change from one gpio bank to another can be caught. +*/ + +#define S5P6442_GPIO_NEXT(__gpio) \ + ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1) + +enum s5p_gpio_number { + S5P6442_GPIO_A0_START = 0, + S5P6442_GPIO_A1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_A0), + S5P6442_GPIO_B_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_A1), + S5P6442_GPIO_C0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_B), + S5P6442_GPIO_C1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_C0), + S5P6442_GPIO_D0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_C1), + S5P6442_GPIO_D1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_D0), + S5P6442_GPIO_E0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_D1), + S5P6442_GPIO_E1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_E0), + S5P6442_GPIO_F0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_E1), + S5P6442_GPIO_F1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_F0), + S5P6442_GPIO_F2_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_F1), + S5P6442_GPIO_F3_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_F2), + S5P6442_GPIO_G0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_F3), + S5P6442_GPIO_G1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_G0), + S5P6442_GPIO_G2_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_G1), + S5P6442_GPIO_H0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_G2), + S5P6442_GPIO_H1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_H0), + S5P6442_GPIO_H2_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_H1), + S5P6442_GPIO_H3_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_H2), + S5P6442_GPIO_J0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_H3), + S5P6442_GPIO_J1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_J0), + S5P6442_GPIO_J2_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_J1), + S5P6442_GPIO_J3_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_J2), + S5P6442_GPIO_J4_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_J3), +}; + +/* S5P6442 GPIO number definitions. */ +#define S5P6442_GPA0(_nr) (S5P6442_GPIO_A0_START + (_nr)) +#define S5P6442_GPA1(_nr) (S5P6442_GPIO_A1_START + (_nr)) +#define S5P6442_GPB(_nr) (S5P6442_GPIO_B_START + (_nr)) +#define S5P6442_GPC0(_nr) (S5P6442_GPIO_C0_START + (_nr)) +#define S5P6442_GPC1(_nr) (S5P6442_GPIO_C1_START + (_nr)) +#define S5P6442_GPD0(_nr) (S5P6442_GPIO_D0_START + (_nr)) +#define S5P6442_GPD1(_nr) (S5P6442_GPIO_D1_START + (_nr)) +#define S5P6442_GPE0(_nr) (S5P6442_GPIO_E0_START + (_nr)) +#define S5P6442_GPE1(_nr) (S5P6442_GPIO_E1_START + (_nr)) +#define S5P6442_GPF0(_nr) (S5P6442_GPIO_F0_START + (_nr)) +#define S5P6442_GPF1(_nr) (S5P6442_GPIO_F1_START + (_nr)) +#define S5P6442_GPF2(_nr) (S5P6442_GPIO_F2_START + (_nr)) +#define S5P6442_GPF3(_nr) (S5P6442_GPIO_F3_START + (_nr)) +#define S5P6442_GPG0(_nr) (S5P6442_GPIO_G0_START + (_nr)) +#define S5P6442_GPG1(_nr) (S5P6442_GPIO_G1_START + (_nr)) +#define S5P6442_GPG2(_nr) (S5P6442_GPIO_G2_START + (_nr)) +#define S5P6442_GPH0(_nr) (S5P6442_GPIO_H0_START + (_nr)) +#define S5P6442_GPH1(_nr) (S5P6442_GPIO_H1_START + (_nr)) +#define S5P6442_GPH2(_nr) (S5P6442_GPIO_H2_START + (_nr)) +#define S5P6442_GPH3(_nr) (S5P6442_GPIO_H3_START + (_nr)) +#define S5P6442_GPJ0(_nr) (S5P6442_GPIO_J0_START + (_nr)) +#define S5P6442_GPJ1(_nr) (S5P6442_GPIO_J1_START + (_nr)) +#define S5P6442_GPJ2(_nr) (S5P6442_GPIO_J2_START + (_nr)) +#define S5P6442_GPJ3(_nr) (S5P6442_GPIO_J3_START + (_nr)) +#define S5P6442_GPJ4(_nr) (S5P6442_GPIO_J4_START + (_nr)) + +/* the end of the S5P6442 specific gpios */ +#define S5P6442_GPIO_END (S5P6442_GPJ4(S5P6442_GPIO_J4_NR) + 1) +#define S3C_GPIO_END S5P6442_GPIO_END + +/* define the number of gpios we need to the one after the GPJ4() range */ +#define ARCH_NR_GPIOS (S5P6442_GPJ4(S5P6442_GPIO_J4_NR) + \ + CONFIG_SAMSUNG_GPIO_EXTRA + 1) + +#include <asm-generic/gpio.h> + +#endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/hardware.h b/arch/arm/mach-s5p6442/include/mach/hardware.h new file mode 100644 index 00000000000..8cd7b67b49d --- /dev/null +++ b/arch/arm/mach-s5p6442/include/mach/hardware.h @@ -0,0 +1,18 @@ +/* linux/arch/arm/mach-s5p6442/include/mach/hardware.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P6442 - Hardware support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H __FILE__ + +/* currently nothing here, placeholder */ + +#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/io.h b/arch/arm/mach-s5p6442/include/mach/io.h new file mode 100644 index 00000000000..5d2195ad0b6 --- /dev/null +++ b/arch/arm/mach-s5p6442/include/mach/io.h @@ -0,0 +1,17 @@ +/* arch/arm/mach-s5p6442/include/mach/io.h + * + * Copyright 2008-2010 Ben Dooks <ben-linux@fluff.org> + * + * Default IO routines for S5P6442 + */ + +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +/* No current ISA/PCI bus support. */ +#define __io(a) __typesafe_io(a) +#define __mem_pci(a) (a) + +#define IO_SPACE_LIMIT (0xFFFFFFFF) + +#endif diff --git a/arch/arm/mach-s5p6442/include/mach/irqs.h b/arch/arm/mach-s5p6442/include/mach/irqs.h new file mode 100644 index 00000000000..da665809f6e --- /dev/null +++ b/arch/arm/mach-s5p6442/include/mach/irqs.h @@ -0,0 +1,86 @@ +/* linux/arch/arm/mach-s5p6442/include/mach/irqs.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P6442 - IRQ definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_IRQS_H +#define __ASM_ARCH_IRQS_H __FILE__ + +#include <plat/irqs.h> + +/* VIC0 */ +#define IRQ_EINT16_31 S5P_IRQ_VIC0(16) +#define IRQ_BATF S5P_IRQ_VIC0(17) +#define IRQ_MDMA S5P_IRQ_VIC0(18) +#define IRQ_PDMA S5P_IRQ_VIC0(19) +#define IRQ_TIMER0_VIC S5P_IRQ_VIC0(21) +#define IRQ_TIMER1_VIC S5P_IRQ_VIC0(22) +#define IRQ_TIMER2_VIC S5P_IRQ_VIC0(23) +#define IRQ_TIMER3_VIC S5P_IRQ_VIC0(24) +#define IRQ_TIMER4_VIC S5P_IRQ_VIC0(25) +#define IRQ_SYSTIMER S5P_IRQ_VIC0(26) +#define IRQ_WDT S5P_IRQ_VIC0(27) +#define IRQ_RTC_ALARM S5P_IRQ_VIC0(28) +#define IRQ_RTC_TIC S5P_IRQ_VIC0(29) +#define IRQ_GPIOINT S5P_IRQ_VIC0(30) + +/* VIC1 */ +#define IRQ_nPMUIRQ S5P_IRQ_VIC1(0) +#define IRQ_ONENAND S5P_IRQ_VIC1(7) +#define IRQ_UART0 S5P_IRQ_VIC1(10) +#define IRQ_UART1 S5P_IRQ_VIC1(11) +#define IRQ_UART2 S5P_IRQ_VIC1(12) +#define IRQ_SPI0 S5P_IRQ_VIC1(15) +#define IRQ_IIC S5P_IRQ_VIC1(19) +#define IRQ_IIC1 S5P_IRQ_VIC1(20) +#define IRQ_IIC2 S5P_IRQ_VIC1(21) +#define IRQ_OTG S5P_IRQ_VIC1(24) +#define IRQ_MSM S5P_IRQ_VIC1(25) +#define IRQ_HSMMC0 S5P_IRQ_VIC1(26) +#define IRQ_HSMMC1 S5P_IRQ_VIC1(27) +#define IRQ_HSMMC2 S5P_IRQ_VIC1(28) +#define IRQ_COMMRX S5P_IRQ_VIC1(29) +#define IRQ_COMMTX S5P_IRQ_VIC1(30) + +/* VIC2 */ +#define IRQ_LCD0 S5P_IRQ_VIC2(0) +#define IRQ_LCD1 S5P_IRQ_VIC2(1) +#define IRQ_LCD2 S5P_IRQ_VIC2(2) +#define IRQ_LCD3 S5P_IRQ_VIC2(3) +#define IRQ_ROTATOR S5P_IRQ_VIC2(4) +#define IRQ_FIMC0 S5P_IRQ_VIC2(5) +#define IRQ_FIMC1 S5P_IRQ_VIC2(6) +#define IRQ_FIMC2 S5P_IRQ_VIC2(7) +#define IRQ_JPEG S5P_IRQ_VIC2(8) +#define IRQ_3D S5P_IRQ_VIC2(10) +#define IRQ_Mixer S5P_IRQ_VIC2(11) +#define IRQ_MFC S5P_IRQ_VIC2(14) +#define IRQ_TVENC S5P_IRQ_VIC2(15) +#define IRQ_I2S0 S5P_IRQ_VIC2(16) +#define IRQ_I2S1 S5P_IRQ_VIC2(17) +#define IRQ_RP S5P_IRQ_VIC2(19) +#define IRQ_PCM0 S5P_IRQ_VIC2(20) +#define IRQ_PCM1 S5P_IRQ_VIC2(21) +#define IRQ_ADC S5P_IRQ_VIC2(23) +#define IRQ_PENDN S5P_IRQ_VIC2(24) +#define IRQ_KEYPAD S5P_IRQ_VIC2(25) +#define IRQ_SSS_INT S5P_IRQ_VIC2(27) +#define IRQ_SSS_HASH S5P_IRQ_VIC2(28) +#define IRQ_VIC_END S5P_IRQ_VIC2(31) + +#define S5P_IRQ_EINT_BASE (IRQ_VIC_END + 1) + +#define IRQ_EINT(x) ((x) < 16 ? S5P_IRQ_VIC0(x) : \ + (S5P_IRQ_EINT_BASE + (x)-16)) +/* Set the default NR_IRQS */ + +#define NR_IRQS (IRQ_EINT(31) + 1) + +#endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/map.h b/arch/arm/mach-s5p6442/include/mach/map.h new file mode 100644 index 00000000000..685277d792f --- /dev/null +++ b/arch/arm/mach-s5p6442/include/mach/map.h @@ -0,0 +1,58 @@ +/* linux/arch/arm/mach-s5p6442/include/mach/map.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P6442 - Memory map definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_MAP_H +#define __ASM_ARCH_MAP_H __FILE__ + +#include <plat/map-base.h> +#include <plat/map-s5p.h> + +#define S5P6442_PA_CHIPID (0xE0000000) +#define S5P_PA_CHIPID S5P6442_PA_CHIPID + +#define S5P6442_PA_SYSCON (0xE0100000) +#define S5P_PA_SYSCON S5P6442_PA_SYSCON + +#define S5P6442_PA_GPIO (0xE0200000) +#define S5P_PA_GPIO S5P6442_PA_GPIO + +#define S5P6442_PA_VIC0 (0xE4000000) +#define S5P_PA_VIC0 S5P6442_PA_VIC0 + +#define S5P6442_PA_VIC1 (0xE4100000) +#define S5P_PA_VIC1 S5P6442_PA_VIC1 + +#define S5P6442_PA_VIC2 (0xE4200000) +#define S5P_PA_VIC2 S5P6442_PA_VIC2 + +#define S5P6442_PA_TIMER (0xEA000000) +#define S5P_PA_TIMER S5P6442_PA_TIMER + +#define S5P6442_PA_SYSTIMER (0xEA100000) + +#define S5P6442_PA_UART (0xEC000000) + +#define S5P_PA_UART0 (S5P6442_PA_UART + 0x0) +#define S5P_PA_UART1 (S5P6442_PA_UART + 0x400) +#define S5P_PA_UART2 (S5P6442_PA_UART + 0x800) +#define S5P_SZ_UART SZ_256 + +#define S5P6442_PA_IIC0 (0xEC100000) + +#define S5P6442_PA_SDRAM (0x20000000) +#define S5P_PA_SDRAM S5P6442_PA_SDRAM + +/* compatibiltiy defines. */ +#define S3C_PA_UART S5P6442_PA_UART +#define S3C_PA_IIC S5P6442_PA_IIC0 + +#endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/memory.h b/arch/arm/mach-s5p6442/include/mach/memory.h new file mode 100644 index 00000000000..9ddd877ba2e --- /dev/null +++ b/arch/arm/mach-s5p6442/include/mach/memory.h @@ -0,0 +1,19 @@ +/* linux/arch/arm/mach-s5p6442/include/mach/memory.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P6442 - Memory definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +#define PHYS_OFFSET UL(0x20000000) +#define CONSISTENT_DMA_SIZE SZ_8M + +#endif /* __ASM_ARCH_MEMORY_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/pwm-clock.h b/arch/arm/mach-s5p6442/include/mach/pwm-clock.h new file mode 100644 index 00000000000..15e8525da0f --- /dev/null +++ b/arch/arm/mach-s5p6442/include/mach/pwm-clock.h @@ -0,0 +1,69 @@ +/* linux/arch/arm/mach-s5p6442/include/mach/pwm-clock.h + * + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * Copyright 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Based on arch/arm/plat-s3c24xx/include/mach/pwm-clock.h + * + * S5P6442 - pwm clock and timer support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_PWMCLK_H +#define __ASM_ARCH_PWMCLK_H __FILE__ + +/** + * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk + * @cfg: The timer TCFG1 register bits shifted down to 0. + * + * Return true if the given configuration from TCFG1 is a TCLK instead + * any of the TDIV clocks. + */ +static inline int pwm_cfg_src_is_tclk(unsigned long tcfg) +{ + return tcfg == S3C2410_TCFG1_MUX_TCLK; +} + +/** + * tcfg_to_divisor() - convert tcfg1 setting to a divisor + * @tcfg1: The tcfg1 setting, shifted down. + * + * Get the divisor value for the given tcfg1 setting. We assume the + * caller has already checked to see if this is not a TCLK source. + */ +static inline unsigned long tcfg_to_divisor(unsigned long tcfg1) +{ + return 1 << (1 + tcfg1); +} + +/** + * pwm_tdiv_has_div1() - does the tdiv setting have a /1 + * + * Return true if we have a /1 in the tdiv setting. + */ +static inline unsigned int pwm_tdiv_has_div1(void) +{ + return 0; +} + +/** + * pwm_tdiv_div_bits() - calculate TCFG1 divisor value. + * @div: The divisor to calculate the bit information for. + * + * Turn a divisor into the necessary bit field for TCFG1. + */ +static inline unsigned long pwm_tdiv_div_bits(unsigned int div) +{ + return ilog2(div) - 1; +} + +#define S3C_TCFG1_MUX_TCLK S3C2410_TCFG1_MUX_TCLK + +#endif /* __ASM_ARCH_PWMCLK_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/regs-clock.h b/arch/arm/mach-s5p6442/include/mach/regs-clock.h new file mode 100644 index 00000000000..d8360b5d4ec --- /dev/null +++ b/arch/arm/mach-s5p6442/include/mach/regs-clock.h @@ -0,0 +1,103 @@ +/* linux/arch/arm/mach-s5p6442/include/mach/regs-clock.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P6442 - Clock register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_REGS_CLOCK_H +#define __ASM_ARCH_REGS_CLOCK_H __FILE__ + +#include <mach/map.h> + +#define S5P_CLKREG(x) (S3C_VA_SYS + (x)) + +#define S5P_APLL_LOCK S5P_CLKREG(0x00) +#define S5P_MPLL_LOCK S5P_CLKREG(0x08) +#define S5P_EPLL_LOCK S5P_CLKREG(0x10) +#define S5P_VPLL_LOCK S5P_CLKREG(0x20) + +#define S5P_APLL_CON S5P_CLKREG(0x100) +#define S5P_MPLL_CON S5P_CLKREG(0x108) +#define S5P_EPLL_CON S5P_CLKREG(0x110) +#define S5P_VPLL_CON S5P_CLKREG(0x120) + +#define S5P_CLK_SRC0 S5P_CLKREG(0x200) +#define S5P_CLK_SRC1 S5P_CLKREG(0x204) +#define S5P_CLK_SRC2 S5P_CLKREG(0x208) +#define S5P_CLK_SRC3 S5P_CLKREG(0x20C) +#define S5P_CLK_SRC4 S5P_CLKREG(0x210) +#define S5P_CLK_SRC5 S5P_CLKREG(0x214) +#define S5P_CLK_SRC6 S5P_CLKREG(0x218) + +#define S5P_CLK_SRC_MASK0 S5P_CLKREG(0x280) +#define S5P_CLK_SRC_MASK1 S5P_CLKREG(0x284) + +#define S5P_CLK_DIV0 S5P_CLKREG(0x300) +#define S5P_CLK_DIV1 S5P_CLKREG(0x304) +#define S5P_CLK_DIV2 S5P_CLKREG(0x308) +#define S5P_CLK_DIV3 S5P_CLKREG(0x30C) +#define S5P_CLK_DIV4 S5P_CLKREG(0x310) +#define S5P_CLK_DIV5 S5P_CLKREG(0x314) +#define S5P_CLK_DIV6 S5P_CLKREG(0x318) + +#define S5P_CLKGATE_IP3 S5P_CLKREG(0x46C) + +/* CLK_OUT */ +#define S5P_CLK_OUT_SHIFT (12) +#define S5P_CLK_OUT_MASK (0x1F << S5P_CLK_OUT_SHIFT) +#define S5P_CLK_OUT S5P_CLKREG(0x500) + +#define S5P_CLK_DIV_STAT0 S5P_CLKREG(0x1000) +#define S5P_CLK_DIV_STAT1 S5P_CLKREG(0x1004) + +#define S5P_CLK_MUX_STAT0 S5P_CLKREG(0x1100) +#define S5P_CLK_MUX_STAT1 S5P_CLKREG(0x1104) + +#define S5P_MDNIE_SEL S5P_CLKREG(0x7008) + +/* Register Bit definition */ +#define S5P_EPLL_EN (1<<31) +#define S5P_EPLL_MASK 0xffffffff +#define S5P_EPLLVAL(_m, _p, _s) ((_m) << 16 | ((_p) << 8) | ((_s))) + +/* CLKDIV0 */ +#define S5P_CLKDIV0_APLL_SHIFT (0) +#define S5P_CLKDIV0_APLL_MASK (0x7 << S5P_CLKDIV0_APLL_SHIFT) +#define S5P_CLKDIV0_A2M_SHIFT (4) +#define S5P_CLKDIV0_A2M_MASK (0x7 << S5P_CLKDIV0_A2M_SHIFT) +#define S5P_CLKDIV0_D0CLK_SHIFT (16) +#define S5P_CLKDIV0_D0CLK_MASK (0xF << S5P_CLKDIV0_D0CLK_SHIFT) +#define S5P_CLKDIV0_P0CLK_SHIFT (20) +#define S5P_CLKDIV0_P0CLK_MASK (0x7 << S5P_CLKDIV0_P0CLK_SHIFT) +#define S5P_CLKDIV0_D1CLK_SHIFT (24) +#define S5P_CLKDIV0_D1CLK_MASK (0xF << S5P_CLKDIV0_D1CLK_SHIFT) +#define S5P_CLKDIV0_P1CLK_SHIFT (28) +#define S5P_CLKDIV0_P1CLK_MASK (0x7 << S5P_CLKDIV0_P1CLK_SHIFT) + +/* Clock MUX status Registers */ +#define S5P_CLK_MUX_STAT0_APLL_SHIFT (0) +#define S5P_CLK_MUX_STAT0_APLL_MASK (0x7 << S5P_CLK_MUX_STAT0_APLL_SHIFT) +#define S5P_CLK_MUX_STAT0_MPLL_SHIFT (4) +#define S5P_CLK_MUX_STAT0_MPLL_MASK (0x7 << S5P_CLK_MUX_STAT0_MPLL_SHIFT) +#define S5P_CLK_MUX_STAT0_EPLL_SHIFT (8) +#define S5P_CLK_MUX_STAT0_EPLL_MASK (0x7 << S5P_CLK_MUX_STAT0_EPLL_SHIFT) +#define S5P_CLK_MUX_STAT0_VPLL_SHIFT (12) +#define S5P_CLK_MUX_STAT0_VPLL_MASK (0x7 << S5P_CLK_MUX_STAT0_VPLL_SHIFT) +#define S5P_CLK_MUX_STAT0_MUXARM_SHIFT (16) +#define S5P_CLK_MUX_STAT0_MUXARM_MASK (0x7 << S5P_CLK_MUX_STAT0_MUXARM_SHIFT) +#define S5P_CLK_MUX_STAT0_MUXD0_SHIFT (20) +#define S5P_CLK_MUX_STAT0_MUXD0_MASK (0x7 << S5P_CLK_MUX_STAT0_MUXD0_SHIFT) +#define S5P_CLK_MUX_STAT0_MUXD1_SHIFT (24) +#define S5P_CLK_MUX_STAT0_MUXD1_MASK (0x7 << S5P_CLK_MUX_STAT0_MUXD1_SHIFT) +#define S5P_CLK_MUX_STAT1_D1SYNC_SHIFT (24) +#define S5P_CLK_MUX_STAT1_D1SYNC_MASK (0x7 << S5P_CLK_MUX_STAT1_D1SYNC_SHIFT) +#define S5P_CLK_MUX_STAT1_D0SYNC_SHIFT (28) +#define S5P_CLK_MUX_STAT1_D0SYNC_MASK (0x7 << S5P_CLK_MUX_STAT1_D0SYNC_SHIFT) + +#endif /* __ASM_ARCH_REGS_CLOCK_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/regs-irq.h b/arch/arm/mach-s5p6442/include/mach/regs-irq.h new file mode 100644 index 00000000000..73782b52a83 --- /dev/null +++ b/arch/arm/mach-s5p6442/include/mach/regs-irq.h @@ -0,0 +1,19 @@ +/* linux/arch/arm/mach-s5p6442/include/mach/regs-irq.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P6442 - IRQ register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_REGS_IRQ_H +#define __ASM_ARCH_REGS_IRQ_H __FILE__ + +#include <asm/hardware/vic.h> +#include <mach/map.h> + +#endif /* __ASM_ARCH_REGS_IRQ_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/system.h b/arch/arm/mach-s5p6442/include/mach/system.h new file mode 100644 index 00000000000..8bcd8ed0c3c --- /dev/null +++ b/arch/arm/mach-s5p6442/include/mach/system.h @@ -0,0 +1,26 @@ +/* linux/arch/arm/mach-s5p6442/include/mach/system.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P6442 - system support header + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H __FILE__ + +static void arch_idle(void) +{ + /* nothing here yet */ +} + +static void arch_reset(char mode, const char *cmd) +{ + /* nothing here yet */ +} + +#endif /* __ASM_ARCH_SYSTEM_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/tick.h b/arch/arm/mach-s5p6442/include/mach/tick.h new file mode 100644 index 00000000000..e1d4cabf829 --- /dev/null +++ b/arch/arm/mach-s5p6442/include/mach/tick.h @@ -0,0 +1,26 @@ +/* linux/arch/arm/mach-s5p6442/include/mach/tick.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Based on arch/arm/mach-s3c6400/include/mach/tick.h + * + * S5P6442 - Timer tick support definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_TICK_H +#define __ASM_ARCH_TICK_H __FILE__ + +static inline u32 s3c24xx_ostimer_pending(void) +{ + u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS); + return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0))); +} + +#define TICK_MAX (0xffffffff) + +#endif /* __ASM_ARCH_TICK_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/timex.h b/arch/arm/mach-s5p6442/include/mach/timex.h new file mode 100644 index 00000000000..ff8f2fcadeb --- /dev/null +++ b/arch/arm/mach-s5p6442/include/mach/timex.h @@ -0,0 +1,24 @@ +/* arch/arm/mach-s5p6442/include/mach/timex.h + * + * Copyright (c) 2003-2010 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S5P6442 - time parameters + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_TIMEX_H +#define __ASM_ARCH_TIMEX_H + +/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it + * a variable is useless. It seems as long as we make our timers an + * exact multiple of HZ, any value that makes a 1->1 correspondence + * for the time conversion functions to/from jiffies is acceptable. +*/ + +#define CLOCK_TICK_RATE 12000000 + +#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/uncompress.h b/arch/arm/mach-s5p6442/include/mach/uncompress.h new file mode 100644 index 00000000000..5ac7cbeeb98 --- /dev/null +++ b/arch/arm/mach-s5p6442/include/mach/uncompress.h @@ -0,0 +1,24 @@ +/* linux/arch/arm/mach-s5p6442/include/mach/uncompress.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P6442 - uncompress code + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_UNCOMPRESS_H +#define __ASM_ARCH_UNCOMPRESS_H + +#include <mach/map.h> +#include <plat/uncompress.h> + +static void arch_detect_cpu(void) +{ + /* we do not need to do any cpu detection here at the moment. */ +} + +#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/vmalloc.h b/arch/arm/mach-s5p6442/include/mach/vmalloc.h new file mode 100644 index 00000000000..be3333688c2 --- /dev/null +++ b/arch/arm/mach-s5p6442/include/mach/vmalloc.h @@ -0,0 +1,17 @@ +/* arch/arm/mach-s5p6442/include/mach/vmalloc.h + * + * Copyright 2010 Ben Dooks <ben-linux@fluff.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S5P6442 vmalloc definition +*/ + +#ifndef __ASM_ARCH_VMALLOC_H +#define __ASM_ARCH_VMALLOC_H + +#define VMALLOC_END (0xE0000000) + +#endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/arch/arm/mach-s5p6442/init.c b/arch/arm/mach-s5p6442/init.c new file mode 100644 index 00000000000..1874bdb71e1 --- /dev/null +++ b/arch/arm/mach-s5p6442/init.c @@ -0,0 +1,44 @@ +/* linux/arch/arm/mach-s5p6442/s5p6442-init.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/serial_core.h> + +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/s5p6442.h> +#include <plat/regs-serial.h> + +static struct s3c24xx_uart_clksrc s5p6442_serial_clocks[] = { + [0] = { + .name = "pclk", + .divisor = 1, + .min_baud = 0, + .max_baud = 0, + }, +}; + +/* uart registration process */ +void __init s5p6442_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) +{ + struct s3c2410_uartcfg *tcfg = cfg; + u32 ucnt; + + for (ucnt = 0; ucnt < no; ucnt++, tcfg++) { + if (!tcfg->clocks) { + tcfg->clocks = s5p6442_serial_clocks; + tcfg->clocks_size = ARRAY_SIZE(s5p6442_serial_clocks); + } + } + + s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no); +} diff --git a/arch/arm/mach-s5p6442/mach-smdk6442.c b/arch/arm/mach-s5p6442/mach-smdk6442.c new file mode 100644 index 00000000000..0d63371ce07 --- /dev/null +++ b/arch/arm/mach-s5p6442/mach-smdk6442.c @@ -0,0 +1,91 @@ +/* linux/arch/arm/mach-s5p6442/mach-smdk6442.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/serial_core.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/setup.h> +#include <asm/mach-types.h> + +#include <mach/map.h> +#include <mach/regs-clock.h> + +#include <plat/regs-serial.h> +#include <plat/s5p6442.h> +#include <plat/devs.h> +#include <plat/cpu.h> + +/* Following are default values for UCON, ULCON and UFCON UART registers */ +#define S5P6442_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI | \ + S3C2443_UCON_RXERR_IRQEN) + +#define S5P6442_ULCON_DEFAULT S3C2410_LCON_CS8 + +#define S5P6442_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S5PV210_UFCON_TXTRIG4 | \ + S5PV210_UFCON_RXTRIG4) + +static struct s3c2410_uartcfg smdk6442_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = S5P6442_UCON_DEFAULT, + .ulcon = S5P6442_ULCON_DEFAULT, + .ufcon = S5P6442_UFCON_DEFAULT, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = S5P6442_UCON_DEFAULT, + .ulcon = S5P6442_ULCON_DEFAULT, + .ufcon = S5P6442_UFCON_DEFAULT, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = S5P6442_UCON_DEFAULT, + .ulcon = S5P6442_ULCON_DEFAULT, + .ufcon = S5P6442_UFCON_DEFAULT, + }, +}; + +static struct platform_device *smdk6442_devices[] __initdata = { +}; + +static void __init smdk6442_map_io(void) +{ + s5p_init_io(NULL, 0, S5P_VA_CHIPID); + s3c24xx_init_clocks(12000000); + s3c24xx_init_uarts(smdk6442_uartcfgs, ARRAY_SIZE(smdk6442_uartcfgs)); +} + +static void __init smdk6442_machine_init(void) +{ + platform_add_devices(smdk6442_devices, ARRAY_SIZE(smdk6442_devices)); +} + +MACHINE_START(SMDK6442, "SMDK6442") + /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ + .phys_io = S3C_PA_UART & 0xfff00000, + .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, + .boot_params = S5P_PA_SDRAM + 0x100, + .init_irq = s5p6442_init_irq, + .map_io = smdk6442_map_io, + .init_machine = smdk6442_machine_init, + .timer = &s3c24xx_timer, +MACHINE_END diff --git a/arch/arm/mach-s5pc100/include/mach/gpio-core.h b/arch/arm/mach-s5pc100/include/mach/gpio-core.h deleted file mode 100644 index ad28d8ec8a7..00000000000 --- a/arch/arm/mach-s5pc100/include/mach/gpio-core.h +++ /dev/null @@ -1,21 +0,0 @@ -/* arch/arm/mach-s5pc100/include/mach/gpio-core.h - * - * Copyright 2009 Samsung Electronics Co. - * Byungho Min <bhmin@samsung.com> - * - * S5PC100 - GPIO core support - * - * Based on mach-s3c6400/include/mach/gpio-core.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_GPIO_CORE_H -#define __ASM_ARCH_GPIO_CORE_H __FILE__ - -/* currently we just include the platform support */ -#include <plat/gpio-core.h> - -#endif /* __ASM_ARCH_GPIO_CORE_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/io.h b/arch/arm/mach-s5pc100/include/mach/io.h new file mode 100644 index 00000000000..819acf5eaf8 --- /dev/null +++ b/arch/arm/mach-s5pc100/include/mach/io.h @@ -0,0 +1,18 @@ +/* arch/arm/mach-s5pc100/include/mach/io.h + * + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben-linux@fluff.org> + * + * Default IO routines for S5PC100 systems + */ + +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +/* No current ISA/PCI bus support. */ +#define __io(a) __typesafe_io(a) +#define __mem_pci(a) (a) + +#define IO_SPACE_LIMIT (0xFFFFFFFF) + +#endif diff --git a/arch/arm/mach-s5pc100/include/mach/tick.h b/arch/arm/mach-s5pc100/include/mach/tick.h index d3de0f3591a..f338c9eec71 100644 --- a/arch/arm/mach-s5pc100/include/mach/tick.h +++ b/arch/arm/mach-s5pc100/include/mach/tick.h @@ -21,7 +21,7 @@ static inline u32 s3c24xx_ostimer_pending(void) { u32 pend = __raw_readl(S3C_VA_VIC0 + VIC_RAW_STATUS); - return pend & 1 << (IRQ_TIMER4 - S5PC1XX_IRQ_VIC0(0)); + return pend & 1 << (IRQ_TIMER4_VIC - S5PC1XX_IRQ_VIC0(0)); } #define TICK_MAX (0xffffffff) diff --git a/arch/arm/mach-s5pc100/include/mach/timex.h b/arch/arm/mach-s5pc100/include/mach/timex.h new file mode 100644 index 00000000000..47ffb17aff9 --- /dev/null +++ b/arch/arm/mach-s5pc100/include/mach/timex.h @@ -0,0 +1,24 @@ +/* arch/arm/mach-s5pc100/include/mach/timex.h + * + * Copyright (c) 2003-2005 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C6400 - time parameters + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_TIMEX_H +#define __ASM_ARCH_TIMEX_H + +/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it + * a variable is useless. It seems as long as we make our timers an + * exact multiple of HZ, any value that makes a 1->1 correspondence + * for the time conversion functions to/from jiffies is acceptable. +*/ + +#define CLOCK_TICK_RATE 12000000 + +#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/vmalloc.h b/arch/arm/mach-s5pc100/include/mach/vmalloc.h new file mode 100644 index 00000000000..be9df79903e --- /dev/null +++ b/arch/arm/mach-s5pc100/include/mach/vmalloc.h @@ -0,0 +1,17 @@ +/* arch/arm/mach-s5pc100/include/mach/vmalloc.h + * + * Copyright 2010 Ben Dooks <ben-linux@fluff.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C6400 vmalloc definition +*/ + +#ifndef __ASM_ARCH_VMALLOC_H +#define __ASM_ARCH_VMALLOC_H + +#define VMALLOC_END (0xe0000000UL) + +#endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig new file mode 100644 index 00000000000..af33a1a89b7 --- /dev/null +++ b/arch/arm/mach-s5pv210/Kconfig @@ -0,0 +1,40 @@ +# arch/arm/mach-s5pv210/Kconfig +# +# Copyright (c) 2010 Samsung Electronics Co., Ltd. +# http://www.samsung.com/ +# +# Licensed under GPLv2 + +# Configuration options for the S5PV210/S5PC110 + +if ARCH_S5PV210 + +config CPU_S5PV210 + bool + select PLAT_S5P + help + Enable S5PV210 CPU support + +choice + prompt "Select machine type" + depends on ARCH_S5PV210 + default MACH_SMDKV210 + +config MACH_SMDKV210 + bool "SMDKV210" + select CPU_S5PV210 + select ARCH_SPARSEMEM_ENABLE + help + Machine support for Samsung SMDKV210 + +config MACH_SMDKC110 + bool "SMDKC110" + select CPU_S5PV210 + select ARCH_SPARSEMEM_ENABLE + help + Machine support for Samsung SMDKC110 + S5PC110(MCP) is one of package option of S5PV210 + +endchoice + +endif diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile new file mode 100644 index 00000000000..8ebf51c52a0 --- /dev/null +++ b/arch/arm/mach-s5pv210/Makefile @@ -0,0 +1,20 @@ +# arch/arm/mach-s5pv210/Makefile +# +# Copyright (c) 2010 Samsung Electronics Co., Ltd. +# http://www.samsung.com/ +# +# Licensed under GPLv2 + +obj-y := +obj-m := +obj-n := +obj- := + +# Core support for S5PV210 system + +obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o + +# machine support + +obj-$(CONFIG_MACH_SMDKV210) += mach-smdkv210.o +obj-$(CONFIG_MACH_SMDKC110) += mach-smdkc110.o diff --git a/arch/arm/mach-s5pv210/Makefile.boot b/arch/arm/mach-s5pv210/Makefile.boot new file mode 100644 index 00000000000..ff90aa13bd6 --- /dev/null +++ b/arch/arm/mach-s5pv210/Makefile.boot @@ -0,0 +1,2 @@ + zreladdr-y := 0x20008000 +params_phys-y := 0x20000100 diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c new file mode 100644 index 00000000000..ccccae26235 --- /dev/null +++ b/arch/arm/mach-s5pv210/clock.c @@ -0,0 +1,454 @@ +/* linux/arch/arm/mach-s5pv210/clock.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5PV210 - Clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/sysdev.h> +#include <linux/io.h> + +#include <mach/map.h> + +#include <plat/cpu-freq.h> +#include <mach/regs-clock.h> +#include <plat/clock.h> +#include <plat/cpu.h> +#include <plat/pll.h> +#include <plat/s5p-clock.h> +#include <plat/clock-clksrc.h> +#include <plat/s5pv210.h> + +static int s5pv210_clk_ip0_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKGATE_IP0, clk, enable); +} + +static int s5pv210_clk_ip1_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKGATE_IP1, clk, enable); +} + +static int s5pv210_clk_ip2_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKGATE_IP2, clk, enable); +} + +static int s5pv210_clk_ip3_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKGATE_IP3, clk, enable); +} + +static struct clk clk_h200 = { + .name = "hclk200", + .id = -1, +}; + +static struct clk clk_h100 = { + .name = "hclk100", + .id = -1, +}; + +static struct clk clk_h166 = { + .name = "hclk166", + .id = -1, +}; + +static struct clk clk_h133 = { + .name = "hclk133", + .id = -1, +}; + +static struct clk clk_p100 = { + .name = "pclk100", + .id = -1, +}; + +static struct clk clk_p83 = { + .name = "pclk83", + .id = -1, +}; + +static struct clk clk_p66 = { + .name = "pclk66", + .id = -1, +}; + +static struct clk *sys_clks[] = { + &clk_h200, + &clk_h100, + &clk_h166, + &clk_h133, + &clk_p100, + &clk_p83, + &clk_p66 +}; + +static struct clk init_clocks_disable[] = { + { + .name = "rot", + .id = -1, + .parent = &clk_h166, + .enable = s5pv210_clk_ip0_ctrl, + .ctrlbit = (1<<29), + }, { + .name = "otg", + .id = -1, + .parent = &clk_h133, + .enable = s5pv210_clk_ip1_ctrl, + .ctrlbit = (1<<16), + }, { + .name = "usb-host", + .id = -1, + .parent = &clk_h133, + .enable = s5pv210_clk_ip1_ctrl, + .ctrlbit = (1<<17), + }, { + .name = "lcd", + .id = -1, + .parent = &clk_h166, + .enable = s5pv210_clk_ip1_ctrl, + .ctrlbit = (1<<0), + }, { + .name = "cfcon", + .id = 0, + .parent = &clk_h133, + .enable = s5pv210_clk_ip1_ctrl, + .ctrlbit = (1<<25), + }, { + .name = "hsmmc", + .id = 0, + .parent = &clk_h133, + .enable = s5pv210_clk_ip2_ctrl, + .ctrlbit = (1<<16), + }, { + .name = "hsmmc", + .id = 1, + .parent = &clk_h133, + .enable = s5pv210_clk_ip2_ctrl, + .ctrlbit = (1<<17), + }, { + .name = "hsmmc", + .id = 2, + .parent = &clk_h133, + .enable = s5pv210_clk_ip2_ctrl, + .ctrlbit = (1<<18), + }, { + .name = "hsmmc", + .id = 3, + .parent = &clk_h133, + .enable = s5pv210_clk_ip2_ctrl, + .ctrlbit = (1<<19), + }, { + .name = "systimer", + .id = -1, + .parent = &clk_p66, + .enable = s5pv210_clk_ip3_ctrl, + .ctrlbit = (1<<16), + }, { + .name = "watchdog", + .id = -1, + .parent = &clk_p66, + .enable = s5pv210_clk_ip3_ctrl, + .ctrlbit = (1<<22), + }, { + .name = "rtc", + .id = -1, + .parent = &clk_p66, + .enable = s5pv210_clk_ip3_ctrl, + .ctrlbit = (1<<15), + }, { + .name = "i2c", + .id = 0, + .parent = &clk_p66, + .enable = s5pv210_clk_ip3_ctrl, + .ctrlbit = (1<<7), + }, { + .name = "i2c", + .id = 1, + .parent = &clk_p66, + .enable = s5pv210_clk_ip3_ctrl, + .ctrlbit = (1<<8), + }, { + .name = "i2c", + .id = 2, + .parent = &clk_p66, + .enable = s5pv210_clk_ip3_ctrl, + .ctrlbit = (1<<9), + }, { + .name = "spi", + .id = 0, + .parent = &clk_p66, + .enable = s5pv210_clk_ip3_ctrl, + .ctrlbit = (1<<12), + }, { + .name = "spi", + .id = 1, + .parent = &clk_p66, + .enable = s5pv210_clk_ip3_ctrl, + .ctrlbit = (1<<13), + }, { + .name = "spi", + .id = 2, + .parent = &clk_p66, + .enable = s5pv210_clk_ip3_ctrl, + .ctrlbit = (1<<14), + }, { + .name = "timers", + .id = -1, + .parent = &clk_p66, + .enable = s5pv210_clk_ip3_ctrl, + .ctrlbit = (1<<23), + }, { + .name = "adc", + .id = -1, + .parent = &clk_p66, + .enable = s5pv210_clk_ip3_ctrl, + .ctrlbit = (1<<24), + }, { + .name = "keypad", + .id = -1, + .parent = &clk_p66, + .enable = s5pv210_clk_ip3_ctrl, + .ctrlbit = (1<<21), + }, { + .name = "i2s_v50", + .id = 0, + .parent = &clk_p, + .enable = s5pv210_clk_ip3_ctrl, + .ctrlbit = (1<<4), + }, { + .name = "i2s_v32", + .id = 0, + .parent = &clk_p, + .enable = s5pv210_clk_ip3_ctrl, + .ctrlbit = (1<<4), + }, { + .name = "i2s_v32", + .id = 1, + .parent = &clk_p, + .enable = s5pv210_clk_ip3_ctrl, + .ctrlbit = (1<<4), + } +}; + +static struct clk init_clocks[] = { + { + .name = "uart", + .id = 0, + .parent = &clk_p66, + .enable = s5pv210_clk_ip3_ctrl, + .ctrlbit = (1<<7), + }, { + .name = "uart", + .id = 1, + .parent = &clk_p66, + .enable = s5pv210_clk_ip3_ctrl, + .ctrlbit = (1<<8), + }, { + .name = "uart", + .id = 2, + .parent = &clk_p66, + .enable = s5pv210_clk_ip3_ctrl, + .ctrlbit = (1<<9), + }, { + .name = "uart", + .id = 3, + .parent = &clk_p66, + .enable = s5pv210_clk_ip3_ctrl, + .ctrlbit = (1<<10), + }, +}; + +static struct clksrc_clk clk_mout_apll = { + .clk = { + .name = "mout_apll", + .id = -1, + }, + .sources = &clk_src_apll, + .reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 }, +}; + +static struct clksrc_clk clk_mout_epll = { + .clk = { + .name = "mout_epll", + .id = -1, + }, + .sources = &clk_src_epll, + .reg_src = { .reg = S5P_CLK_SRC0, .shift = 8, .size = 1 }, +}; + +static struct clksrc_clk clk_mout_mpll = { + .clk = { + .name = "mout_mpll", + .id = -1, + }, + .sources = &clk_src_mpll, + .reg_src = { .reg = S5P_CLK_SRC0, .shift = 4, .size = 1 }, +}; + +static struct clk *clkset_uart_list[] = { + [6] = &clk_mout_mpll.clk, + [7] = &clk_mout_epll.clk, +}; + +static struct clksrc_sources clkset_uart = { + .sources = clkset_uart_list, + .nr_sources = ARRAY_SIZE(clkset_uart_list), +}; + +static struct clksrc_clk clksrcs[] = { + { + .clk = { + .name = "uclk1", + .id = -1, + .ctrlbit = (1<<17), + .enable = s5pv210_clk_ip3_ctrl, + }, + .sources = &clkset_uart, + .reg_src = { .reg = S5P_CLK_SRC4, .shift = 16, .size = 4 }, + .reg_div = { .reg = S5P_CLK_DIV4, .shift = 16, .size = 4 }, + } +}; + +/* Clock initialisation code */ +static struct clksrc_clk *init_parents[] = { + &clk_mout_apll, + &clk_mout_epll, + &clk_mout_mpll, +}; + +#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1) + +void __init_or_cpufreq s5pv210_setup_clocks(void) +{ + struct clk *xtal_clk; + unsigned long xtal; + unsigned long armclk; + unsigned long hclk200; + unsigned long hclk166; + unsigned long hclk133; + unsigned long pclk100; + unsigned long pclk83; + unsigned long pclk66; + unsigned long apll; + unsigned long mpll; + unsigned long epll; + unsigned int ptr; + u32 clkdiv0, clkdiv1; + + printk(KERN_DEBUG "%s: registering clocks\n", __func__); + + clkdiv0 = __raw_readl(S5P_CLK_DIV0); + clkdiv1 = __raw_readl(S5P_CLK_DIV1); + + printk(KERN_DEBUG "%s: clkdiv0 = %08x, clkdiv1 = %08x\n", + __func__, clkdiv0, clkdiv1); + + xtal_clk = clk_get(NULL, "xtal"); + BUG_ON(IS_ERR(xtal_clk)); + + xtal = clk_get_rate(xtal_clk); + clk_put(xtal_clk); + + printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal); + + apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4508); + mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502); + epll = s5p_get_pll45xx(xtal, __raw_readl(S5P_EPLL_CON), pll_4500); + + printk(KERN_INFO "S5PV210: PLL settings, A=%ld, M=%ld, E=%ld", + apll, mpll, epll); + + armclk = apll / GET_DIV(clkdiv0, S5P_CLKDIV0_APLL); + if (__raw_readl(S5P_CLK_SRC0) & S5P_CLKSRC0_MUX200_MASK) + hclk200 = mpll / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK200); + else + hclk200 = armclk / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK200); + + if (__raw_readl(S5P_CLK_SRC0) & S5P_CLKSRC0_MUX166_MASK) { + hclk166 = apll / GET_DIV(clkdiv0, S5P_CLKDIV0_A2M); + hclk166 = hclk166 / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK166); + } else + hclk166 = mpll / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK166); + + if (__raw_readl(S5P_CLK_SRC0) & S5P_CLKSRC0_MUX133_MASK) { + hclk133 = apll / GET_DIV(clkdiv0, S5P_CLKDIV0_A2M); + hclk133 = hclk133 / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK133); + } else + hclk133 = mpll / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK133); + + pclk100 = hclk200 / GET_DIV(clkdiv0, S5P_CLKDIV0_PCLK100); + pclk83 = hclk166 / GET_DIV(clkdiv0, S5P_CLKDIV0_PCLK83); + pclk66 = hclk133 / GET_DIV(clkdiv0, S5P_CLKDIV0_PCLK66); + + printk(KERN_INFO "S5PV210: ARMCLK=%ld, HCLKM=%ld, HCLKD=%ld, \ + HCLKP=%ld, PCLKM=%ld, PCLKD=%ld, PCLKP=%ld\n", + armclk, hclk200, hclk166, hclk133, pclk100, pclk83, pclk66); + + clk_fout_apll.rate = apll; + clk_fout_mpll.rate = mpll; + clk_fout_epll.rate = epll; + + clk_f.rate = armclk; + clk_h.rate = hclk133; + clk_p.rate = pclk66; + clk_p66.rate = pclk66; + clk_p83.rate = pclk83; + clk_h133.rate = hclk133; + clk_h166.rate = hclk166; + clk_h200.rate = hclk200; + + for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++) + s3c_set_clksrc(init_parents[ptr], true); + + for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) + s3c_set_clksrc(&clksrcs[ptr], true); +} + +static struct clk *clks[] __initdata = { + &clk_mout_epll.clk, + &clk_mout_mpll.clk, +}; + +void __init s5pv210_register_clocks(void) +{ + struct clk *clkp; + int ret; + int ptr; + + ret = s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); + if (ret > 0) + printk(KERN_ERR "Failed to register %u clocks\n", ret); + + s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); + s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); + + ret = s3c24xx_register_clocks(sys_clks, ARRAY_SIZE(sys_clks)); + if (ret > 0) + printk(KERN_ERR "Failed to register system clocks\n"); + + clkp = init_clocks_disable; + for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) { + ret = s3c24xx_register_clock(clkp); + if (ret < 0) { + printk(KERN_ERR "Failed to register clock %s (%d)\n", + clkp->name, ret); + } + (clkp->enable)(clkp, 0); + } + + s3c_pwmclk_init(); +} diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c new file mode 100644 index 00000000000..0e0f8fde2aa --- /dev/null +++ b/arch/arm/mach-s5pv210/cpu.c @@ -0,0 +1,126 @@ +/* linux/arch/arm/mach-s5pv210/cpu.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/sysdev.h> +#include <linux/platform_device.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <asm/proc-fns.h> +#include <mach/map.h> +#include <mach/regs-clock.h> + +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/clock.h> +#include <plat/s5pv210.h> + +/* Initial IO mappings */ + +static struct map_desc s5pv210_iodesc[] __initdata = { + { + .virtual = (unsigned long)S5P_VA_SYSTIMER, + .pfn = __phys_to_pfn(S5PV210_PA_SYSTIMER), + .length = SZ_1M, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)VA_VIC2, + .pfn = __phys_to_pfn(S5PV210_PA_VIC2), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)VA_VIC3, + .pfn = __phys_to_pfn(S5PV210_PA_VIC3), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_SROMC, + .pfn = __phys_to_pfn(S5PV210_PA_SROMC), + .length = SZ_4K, + .type = MT_DEVICE, + } +}; + +static void s5pv210_idle(void) +{ + if (!need_resched()) + cpu_do_idle(); + + local_irq_enable(); +} + +/* s5pv210_map_io + * + * register the standard cpu IO areas +*/ + +void __init s5pv210_map_io(void) +{ + iotable_init(s5pv210_iodesc, ARRAY_SIZE(s5pv210_iodesc)); +} + +void __init s5pv210_init_clocks(int xtal) +{ + printk(KERN_DEBUG "%s: initializing clocks\n", __func__); + + s3c24xx_register_baseclocks(xtal); + s5p_register_clocks(xtal); + s5pv210_register_clocks(); + s5pv210_setup_clocks(); +} + +void __init s5pv210_init_irq(void) +{ + u32 vic[4]; /* S5PV210 supports 4 VIC */ + + /* All the VICs are fully populated. */ + vic[0] = ~0; + vic[1] = ~0; + vic[2] = ~0; + vic[3] = ~0; + + s5p_init_irq(vic, ARRAY_SIZE(vic)); +} + +static struct sysdev_class s5pv210_sysclass = { + .name = "s5pv210-core", +}; + +static struct sys_device s5pv210_sysdev = { + .cls = &s5pv210_sysclass, +}; + +static int __init s5pv210_core_init(void) +{ + return sysdev_class_register(&s5pv210_sysclass); +} + +core_initcall(s5pv210_core_init); + +int __init s5pv210_init(void) +{ + printk(KERN_INFO "S5PV210: Initializing architecture\n"); + + /* set idle function */ + pm_idle = s5pv210_idle; + + return sysdev_register(&s5pv210_sysdev); +} diff --git a/arch/arm/mach-s5pv210/include/mach/debug-macro.S b/arch/arm/mach-s5pv210/include/mach/debug-macro.S new file mode 100644 index 00000000000..7872f5c3dfc --- /dev/null +++ b/arch/arm/mach-s5pv210/include/mach/debug-macro.S @@ -0,0 +1,42 @@ +/* linux/arch/arm/mach-s5pv210/include/mach/debug-macro.S + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Based on arch/arm/mach-s3c6400/include/mach/debug-macro.S + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* pull in the relevant register and map files. */ + +#include <mach/map.h> +#include <plat/regs-serial.h> + + /* note, for the boot process to work we have to keep the UART + * virtual address aligned to an 1MiB boundary for the L1 + * mapping the head code makes. We keep the UART virtual address + * aligned and add in the offset when we load the value here. + */ + + .macro addruart, rx, tmp + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 + ldreq \rx, = S3C_PA_UART + ldrne \rx, = S3C_VA_UART +#if CONFIG_DEBUG_S3C_UART != 0 + add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART) +#endif + .endm + +#define fifo_full fifo_full_s5pv210 +#define fifo_level fifo_level_s5pv210 + +/* include the reset of the code which will do the work, we're only + * compiling for a single cpu processor type so the default of s3c2440 + * will be fine with us. + */ + +#include <plat/debug-macro.S> diff --git a/arch/arm/mach-s5pv210/include/mach/entry-macro.S b/arch/arm/mach-s5pv210/include/mach/entry-macro.S new file mode 100644 index 00000000000..3aa41ac59f0 --- /dev/null +++ b/arch/arm/mach-s5pv210/include/mach/entry-macro.S @@ -0,0 +1,54 @@ +/* linux/arch/arm/mach-s5pv210/include/mach/entry-macro.S + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Low-level IRQ helper macros for the Samsung S5PV210 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <asm/hardware/vic.h> +#include <mach/map.h> +#include <plat/irqs.h> + + .macro disable_fiq + .endm + + .macro get_irqnr_preamble, base, tmp + ldr \base, =VA_VIC0 + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + + @ check the vic0 + mov \irqnr, # S5P_IRQ_OFFSET + 31 + ldr \irqstat, [ \base, # VIC_IRQ_STATUS ] + teq \irqstat, #0 + + @ otherwise try vic1 + addeq \tmp, \base, #(VA_VIC1 - VA_VIC0) + addeq \irqnr, \irqnr, #32 + ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ] + teqeq \irqstat, #0 + + @ otherwise try vic2 + addeq \tmp, \base, #(VA_VIC2 - VA_VIC0) + addeq \irqnr, \irqnr, #32 + ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ] + teqeq \irqstat, #0 + + @ otherwise try vic3 + addeq \tmp, \base, #(VA_VIC3 - VA_VIC0) + addeq \irqnr, \irqnr, #32 + ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ] + teqeq \irqstat, #0 + + clzne \irqstat, \irqstat + subne \irqnr, \irqnr, \irqstat + .endm diff --git a/arch/arm/mach-s5pv210/include/mach/gpio.h b/arch/arm/mach-s5pv210/include/mach/gpio.h new file mode 100644 index 00000000000..533b020e21e --- /dev/null +++ b/arch/arm/mach-s5pv210/include/mach/gpio.h @@ -0,0 +1,129 @@ +/* linux/arch/arm/mach-s5pv210/include/mach/gpio.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5PV210 - GPIO lib support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_GPIO_H +#define __ASM_ARCH_GPIO_H __FILE__ + +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep +#define gpio_to_irq __gpio_to_irq + +/* GPIO bank sizes */ +#define S5PV210_GPIO_A0_NR (8) +#define S5PV210_GPIO_A1_NR (4) +#define S5PV210_GPIO_B_NR (8) +#define S5PV210_GPIO_C0_NR (5) +#define S5PV210_GPIO_C1_NR (5) +#define S5PV210_GPIO_D0_NR (4) +#define S5PV210_GPIO_D1_NR (6) +#define S5PV210_GPIO_E0_NR (8) +#define S5PV210_GPIO_E1_NR (5) +#define S5PV210_GPIO_F0_NR (8) +#define S5PV210_GPIO_F1_NR (8) +#define S5PV210_GPIO_F2_NR (8) +#define S5PV210_GPIO_F3_NR (6) +#define S5PV210_GPIO_G0_NR (7) +#define S5PV210_GPIO_G1_NR (7) +#define S5PV210_GPIO_G2_NR (7) +#define S5PV210_GPIO_G3_NR (7) +#define S5PV210_GPIO_H0_NR (8) +#define S5PV210_GPIO_H1_NR (8) +#define S5PV210_GPIO_H2_NR (8) +#define S5PV210_GPIO_H3_NR (8) +#define S5PV210_GPIO_I_NR (7) +#define S5PV210_GPIO_J0_NR (8) +#define S5PV210_GPIO_J1_NR (6) +#define S5PV210_GPIO_J2_NR (8) +#define S5PV210_GPIO_J3_NR (8) +#define S5PV210_GPIO_J4_NR (5) + +/* GPIO bank numbers */ + +/* CONFIG_S3C_GPIO_SPACE allows the user to select extra + * space for debugging purposes so that any accidental + * change from one gpio bank to another can be caught. +*/ + +#define S5PV210_GPIO_NEXT(__gpio) \ + ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1) + +enum s5p_gpio_number { + S5PV210_GPIO_A0_START = 0, + S5PV210_GPIO_A1_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_A0), + S5PV210_GPIO_B_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_A1), + S5PV210_GPIO_C0_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_B), + S5PV210_GPIO_C1_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_C0), + S5PV210_GPIO_D0_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_C1), + S5PV210_GPIO_D1_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_D0), + S5PV210_GPIO_E0_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_D1), + S5PV210_GPIO_E1_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_E0), + S5PV210_GPIO_F0_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_E1), + S5PV210_GPIO_F1_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_F0), + S5PV210_GPIO_F2_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_F1), + S5PV210_GPIO_F3_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_F2), + S5PV210_GPIO_G0_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_F3), + S5PV210_GPIO_G1_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_G0), + S5PV210_GPIO_G2_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_G1), + S5PV210_GPIO_G3_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_G2), + S5PV210_GPIO_H0_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_G3), + S5PV210_GPIO_H1_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_H0), + S5PV210_GPIO_H2_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_H1), + S5PV210_GPIO_H3_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_H2), + S5PV210_GPIO_I_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_H3), + S5PV210_GPIO_J0_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_I), + S5PV210_GPIO_J1_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_J0), + S5PV210_GPIO_J2_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_J1), + S5PV210_GPIO_J3_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_J2), + S5PV210_GPIO_J4_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_J3), +}; + +/* S5PV210 GPIO number definitions */ +#define S5PV210_GPA0(_nr) (S5PV210_GPIO_A0_START + (_nr)) +#define S5PV210_GPA1(_nr) (S5PV210_GPIO_A1_START + (_nr)) +#define S5PV210_GPB(_nr) (S5PV210_GPIO_B_START + (_nr)) +#define S5PV210_GPC0(_nr) (S5PV210_GPIO_C0_START + (_nr)) +#define S5PV210_GPC1(_nr) (S5PV210_GPIO_C1_START + (_nr)) +#define S5PV210_GPD0(_nr) (S5PV210_GPIO_D0_START + (_nr)) +#define S5PV210_GPD1(_nr) (S5PV210_GPIO_D1_START + (_nr)) +#define S5PV210_GPE0(_nr) (S5PV210_GPIO_E0_START + (_nr)) +#define S5PV210_GPE1(_nr) (S5PV210_GPIO_E1_START + (_nr)) +#define S5PV210_GPF0(_nr) (S5PV210_GPIO_F0_START + (_nr)) +#define S5PV210_GPF1(_nr) (S5PV210_GPIO_F1_START + (_nr)) +#define S5PV210_GPF2(_nr) (S5PV210_GPIO_F2_START + (_nr)) +#define S5PV210_GPF3(_nr) (S5PV210_GPIO_F3_START + (_nr)) +#define S5PV210_GPG0(_nr) (S5PV210_GPIO_G0_START + (_nr)) +#define S5PV210_GPG1(_nr) (S5PV210_GPIO_G1_START + (_nr)) +#define S5PV210_GPG2(_nr) (S5PV210_GPIO_G2_START + (_nr)) +#define S5PV210_GPG3(_nr) (S5PV210_GPIO_G3_START + (_nr)) +#define S5PV210_GPH0(_nr) (S5PV210_GPIO_H0_START + (_nr)) +#define S5PV210_GPH1(_nr) (S5PV210_GPIO_H1_START + (_nr)) +#define S5PV210_GPH2(_nr) (S5PV210_GPIO_H2_START + (_nr)) +#define S5PV210_GPH3(_nr) (S5PV210_GPIO_H3_START + (_nr)) +#define S5PV210_GPI(_nr) (S5PV210_GPIO_I_START + (_nr)) +#define S5PV210_GPJ0(_nr) (S5PV210_GPIO_J0_START + (_nr)) +#define S5PV210_GPJ1(_nr) (S5PV210_GPIO_J1_START + (_nr)) +#define S5PV210_GPJ2(_nr) (S5PV210_GPIO_J2_START + (_nr)) +#define S5PV210_GPJ3(_nr) (S5PV210_GPIO_J3_START + (_nr)) +#define S5PV210_GPJ4(_nr) (S5PV210_GPIO_J4_START + (_nr)) + +/* the end of the S5PV210 specific gpios */ +#define S5PV210_GPIO_END (S5PV210_GPJ4(S5PV210_GPIO_J4_NR) + 1) +#define S3C_GPIO_END S5PV210_GPIO_END + +/* define the number of gpios we need to the one after the GPJ4() range */ +#define ARCH_NR_GPIOS (S5PV210_GPJ4(S5PV210_GPIO_J4_NR) + \ + CONFIG_SAMSUNG_GPIO_EXTRA + 1) + +#include <asm-generic/gpio.h> + +#endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/hardware.h b/arch/arm/mach-s5pv210/include/mach/hardware.h new file mode 100644 index 00000000000..fada7a392d0 --- /dev/null +++ b/arch/arm/mach-s5pv210/include/mach/hardware.h @@ -0,0 +1,18 @@ +/* linux/arch/arm/mach-s5pv210/include/mach/hardware.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5PV210 - Hardware support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H __FILE__ + +/* currently nothing here, placeholder */ + +#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/io.h b/arch/arm/mach-s5pv210/include/mach/io.h new file mode 100644 index 00000000000..5ab9d560bc8 --- /dev/null +++ b/arch/arm/mach-s5pv210/include/mach/io.h @@ -0,0 +1,26 @@ +/* linux/arch/arm/mach-s5pv210/include/mach/io.h + * + * Copyright 2008-2010 Ben Dooks <ben-linux@fluff.org> + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Based on arch/arm/mach-s5p6442/include/mach/io.h + * + * Default IO routines for S5PV210 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H __FILE__ + +/* No current ISA/PCI bus support. */ +#define __io(a) __typesafe_io(a) +#define __mem_pci(a) (a) + +#define IO_SPACE_LIMIT (0xFFFFFFFF) + +#endif /* __ASM_ARM_ARCH_IO_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/irqs.h b/arch/arm/mach-s5pv210/include/mach/irqs.h new file mode 100644 index 00000000000..62c5175ef29 --- /dev/null +++ b/arch/arm/mach-s5pv210/include/mach/irqs.h @@ -0,0 +1,146 @@ +/* linux/arch/arm/mach-s5pv210/include/mach/irqs.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5PV210 - IRQ definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_IRQS_H +#define __ASM_ARCH_IRQS_H __FILE__ + +#include <plat/irqs.h> + +/* VIC0: System, DMA, Timer */ + +#define IRQ_EINT0 S5P_IRQ_VIC0(0) +#define IRQ_EINT1 S5P_IRQ_VIC0(1) +#define IRQ_EINT2 S5P_IRQ_VIC0(2) +#define IRQ_EINT3 S5P_IRQ_VIC0(3) +#define IRQ_EINT4 S5P_IRQ_VIC0(4) +#define IRQ_EINT5 S5P_IRQ_VIC0(5) +#define IRQ_EINT6 S5P_IRQ_VIC0(6) +#define IRQ_EINT7 S5P_IRQ_VIC0(7) +#define IRQ_EINT8 S5P_IRQ_VIC0(8) +#define IRQ_EINT9 S5P_IRQ_VIC0(9) +#define IRQ_EINT10 S5P_IRQ_VIC0(10) +#define IRQ_EINT11 S5P_IRQ_VIC0(11) +#define IRQ_EINT12 S5P_IRQ_VIC0(12) +#define IRQ_EINT13 S5P_IRQ_VIC0(13) +#define IRQ_EINT14 S5P_IRQ_VIC0(14) +#define IRQ_EINT15 S5P_IRQ_VIC0(15) +#define IRQ_EINT16_31 S5P_IRQ_VIC0(16) +#define IRQ_BATF S5P_IRQ_VIC0(17) +#define IRQ_MDMA S5P_IRQ_VIC0(18) +#define IRQ_PDMA0 S5P_IRQ_VIC0(19) +#define IRQ_PDMA1 S5P_IRQ_VIC0(20) +#define IRQ_TIMER0_VIC S5P_IRQ_VIC0(21) +#define IRQ_TIMER1_VIC S5P_IRQ_VIC0(22) +#define IRQ_TIMER2_VIC S5P_IRQ_VIC0(23) +#define IRQ_TIMER3_VIC S5P_IRQ_VIC0(24) +#define IRQ_TIMER4_VIC S5P_IRQ_VIC0(25) +#define IRQ_SYSTIMER S5P_IRQ_VIC0(26) +#define IRQ_WDT S5P_IRQ_VIC0(27) +#define IRQ_RTC_ALARM S5P_IRQ_VIC0(28) +#define IRQ_RTC_TIC S5P_IRQ_VIC0(29) +#define IRQ_GPIOINT S5P_IRQ_VIC0(30) +#define IRQ_FIMC3 S5P_IRQ_VIC0(31) + +/* VIC1: ARM, Power, Memory, Connectivity, Storage */ + +#define IRQ_CORTEX0 S5P_IRQ_VIC1(0) +#define IRQ_CORTEX1 S5P_IRQ_VIC1(1) +#define IRQ_CORTEX2 S5P_IRQ_VIC1(2) +#define IRQ_CORTEX3 S5P_IRQ_VIC1(3) +#define IRQ_CORTEX4 S5P_IRQ_VIC1(4) +#define IRQ_IEMAPC S5P_IRQ_VIC1(5) +#define IRQ_IEMIEC S5P_IRQ_VIC1(6) +#define IRQ_ONENAND S5P_IRQ_VIC1(7) +#define IRQ_NFC S5P_IRQ_VIC1(8) +#define IRQ_CFC S5P_IRQ_VIC1(9) +#define IRQ_UART0 S5P_IRQ_VIC1(10) +#define IRQ_UART1 S5P_IRQ_VIC1(11) +#define IRQ_UART2 S5P_IRQ_VIC1(12) +#define IRQ_UART3 S5P_IRQ_VIC1(13) +#define IRQ_IIC S5P_IRQ_VIC1(14) +#define IRQ_SPI0 S5P_IRQ_VIC1(15) +#define IRQ_SPI1 S5P_IRQ_VIC1(16) +#define IRQ_SPI2 S5P_IRQ_VIC1(17) +#define IRQ_IRDA S5P_IRQ_VIC1(18) +#define IRQ_CAN0 S5P_IRQ_VIC1(19) +#define IRQ_CAN1 S5P_IRQ_VIC1(20) +#define IRQ_HSIRX S5P_IRQ_VIC1(21) +#define IRQ_HSITX S5P_IRQ_VIC1(22) +#define IRQ_UHOST S5P_IRQ_VIC1(23) +#define IRQ_OTG S5P_IRQ_VIC1(24) +#define IRQ_MSM S5P_IRQ_VIC1(25) +#define IRQ_HSMMC0 S5P_IRQ_VIC1(26) +#define IRQ_HSMMC1 S5P_IRQ_VIC1(27) +#define IRQ_HSMMC2 S5P_IRQ_VIC1(28) +#define IRQ_MIPICSI S5P_IRQ_VIC1(29) +#define IRQ_MIPIDSI S5P_IRQ_VIC1(30) +#define IRQ_ONENAND_AUDI S5P_IRQ_VIC1(31) + +/* VIC2: Multimedia, Audio, Security */ + +#define IRQ_LCD0 S5P_IRQ_VIC2(0) +#define IRQ_LCD1 S5P_IRQ_VIC2(1) +#define IRQ_LCD2 S5P_IRQ_VIC2(2) +#define IRQ_LCD3 S5P_IRQ_VIC2(3) +#define IRQ_ROTATOR S5P_IRQ_VIC2(4) +#define IRQ_FIMC0 S5P_IRQ_VIC2(5) +#define IRQ_FIMC1 S5P_IRQ_VIC2(6) +#define IRQ_FIMC2 S5P_IRQ_VIC2(7) +#define IRQ_JPEG S5P_IRQ_VIC2(8) +#define IRQ_2D S5P_IRQ_VIC2(9) +#define IRQ_3D S5P_IRQ_VIC2(10) +#define IRQ_MIXER S5P_IRQ_VIC2(11) +#define IRQ_HDMI S5P_IRQ_VIC2(12) +#define IRQ_IIC1 S5P_IRQ_VIC2(13) +#define IRQ_MFC S5P_IRQ_VIC2(14) +#define IRQ_TVENC S5P_IRQ_VIC2(15) +#define IRQ_I2S0 S5P_IRQ_VIC2(16) +#define IRQ_I2S1 S5P_IRQ_VIC2(17) +#define IRQ_I2S2 S5P_IRQ_VIC2(18) +#define IRQ_AC97 S5P_IRQ_VIC2(19) +#define IRQ_PCM0 S5P_IRQ_VIC2(20) +#define IRQ_PCM1 S5P_IRQ_VIC2(21) +#define IRQ_SPDIF S5P_IRQ_VIC2(22) +#define IRQ_ADC S5P_IRQ_VIC2(23) +#define IRQ_PENDN S5P_IRQ_VIC2(24) +#define IRQ_TC IRQ_PENDN +#define IRQ_KEYPAD S5P_IRQ_VIC2(25) +#define IRQ_CG S5P_IRQ_VIC2(26) +#define IRQ_SEC S5P_IRQ_VIC2(27) +#define IRQ_SECRX S5P_IRQ_VIC2(28) +#define IRQ_SECTX S5P_IRQ_VIC2(29) +#define IRQ_SDMIRQ S5P_IRQ_VIC2(30) +#define IRQ_SDMFIQ S5P_IRQ_VIC2(31) + +/* VIC3: Etc */ + +#define IRQ_IPC S5P_IRQ_VIC3(0) +#define IRQ_HOSTIF S5P_IRQ_VIC3(1) +#define IRQ_MMC3 S5P_IRQ_VIC3(2) +#define IRQ_CEC S5P_IRQ_VIC3(3) +#define IRQ_TSI S5P_IRQ_VIC3(4) +#define IRQ_MDNIE0 S5P_IRQ_VIC3(5) +#define IRQ_MDNIE1 S5P_IRQ_VIC3(6) +#define IRQ_MDNIE2 S5P_IRQ_VIC3(7) +#define IRQ_MDNIE3 S5P_IRQ_VIC3(8) +#define IRQ_VIC_END S5P_IRQ_VIC3(31) + +#define S5P_IRQ_EINT_BASE (IRQ_VIC_END + 1) + +#define S5P_EINT(x) ((x) + S5P_IRQ_EINT_BASE) +#define IRQ_EINT(x) S5P_EINT(x) + +/* Set the default NR_IRQS */ + +#define NR_IRQS (IRQ_EINT(31) + 1) + +#endif /* ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h new file mode 100644 index 00000000000..c22694c8231 --- /dev/null +++ b/arch/arm/mach-s5pv210/include/mach/map.h @@ -0,0 +1,65 @@ +/* linux/arch/arm/mach-s5pv210/include/mach/map.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5PV210 - Memory map definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_MAP_H +#define __ASM_ARCH_MAP_H __FILE__ + +#include <plat/map-base.h> +#include <plat/map-s5p.h> + +#define S5PV210_PA_CHIPID (0xE0000000) +#define S5P_PA_CHIPID S5PV210_PA_CHIPID + +#define S5PV210_PA_SYSCON (0xE0100000) +#define S5P_PA_SYSCON S5PV210_PA_SYSCON + +#define S5PV210_PA_GPIO (0xE0200000) +#define S5P_PA_GPIO S5PV210_PA_GPIO + +#define S5PV210_PA_IIC0 (0xE1800000) + +#define S5PV210_PA_TIMER (0xE2500000) +#define S5P_PA_TIMER S5PV210_PA_TIMER + +#define S5PV210_PA_SYSTIMER (0xE2600000) + +#define S5PV210_PA_UART (0xE2900000) + +#define S5P_PA_UART0 (S5PV210_PA_UART + 0x0) +#define S5P_PA_UART1 (S5PV210_PA_UART + 0x400) +#define S5P_PA_UART2 (S5PV210_PA_UART + 0x800) +#define S5P_PA_UART3 (S5PV210_PA_UART + 0xC00) + +#define S5P_SZ_UART SZ_256 + +#define S5PV210_PA_SROMC (0xE8000000) + +#define S5PV210_PA_VIC0 (0xF2000000) +#define S5P_PA_VIC0 S5PV210_PA_VIC0 + +#define S5PV210_PA_VIC1 (0xF2100000) +#define S5P_PA_VIC1 S5PV210_PA_VIC1 + +#define S5PV210_PA_VIC2 (0xF2200000) +#define S5P_PA_VIC2 S5PV210_PA_VIC2 + +#define S5PV210_PA_VIC3 (0xF2300000) +#define S5P_PA_VIC3 S5PV210_PA_VIC3 + +#define S5PV210_PA_SDRAM (0x20000000) +#define S5P_PA_SDRAM S5PV210_PA_SDRAM + +/* compatibiltiy defines. */ +#define S3C_PA_UART S5PV210_PA_UART +#define S3C_PA_IIC S5PV210_PA_IIC0 + +#endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/memory.h b/arch/arm/mach-s5pv210/include/mach/memory.h new file mode 100644 index 00000000000..379117e2760 --- /dev/null +++ b/arch/arm/mach-s5pv210/include/mach/memory.h @@ -0,0 +1,23 @@ +/* linux/arch/arm/mach-s5pv210/include/mach/memory.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5PV210 - Memory definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +#define PHYS_OFFSET UL(0x20000000) +#define CONSISTENT_DMA_SIZE (SZ_8M + SZ_4M + SZ_2M) + +/* Maximum of 256MiB in one bank */ +#define MAX_PHYSMEM_BITS 32 +#define SECTION_SIZE_BITS 28 + +#endif /* __ASM_ARCH_MEMORY_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/pwm-clock.h b/arch/arm/mach-s5pv210/include/mach/pwm-clock.h new file mode 100644 index 00000000000..69027fea987 --- /dev/null +++ b/arch/arm/mach-s5pv210/include/mach/pwm-clock.h @@ -0,0 +1,69 @@ +/* linux/arch/arm/mach-s5pv210/include/mach/pwm-clock.h + * + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Based on arch/arm/plat-s3c24xx/include/mach/pwm-clock.h + * + * S5PV210 - pwm clock and timer support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_PWMCLK_H +#define __ASM_ARCH_PWMCLK_H __FILE__ + +/** + * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk + * @cfg: The timer TCFG1 register bits shifted down to 0. + * + * Return true if the given configuration from TCFG1 is a TCLK instead + * any of the TDIV clocks. + */ +static inline int pwm_cfg_src_is_tclk(unsigned long tcfg) +{ + return tcfg == S3C2410_TCFG1_MUX_TCLK; +} + +/** + * tcfg_to_divisor() - convert tcfg1 setting to a divisor + * @tcfg1: The tcfg1 setting, shifted down. + * + * Get the divisor value for the given tcfg1 setting. We assume the + * caller has already checked to see if this is not a TCLK source. + */ +static inline unsigned long tcfg_to_divisor(unsigned long tcfg1) +{ + return 1 << (1 + tcfg1); +} + +/** + * pwm_tdiv_has_div1() - does the tdiv setting have a /1 + * + * Return true if we have a /1 in the tdiv setting. + */ +static inline unsigned int pwm_tdiv_has_div1(void) +{ + return 0; +} + +/** + * pwm_tdiv_div_bits() - calculate TCFG1 divisor value. + * @div: The divisor to calculate the bit information for. + * + * Turn a divisor into the necessary bit field for TCFG1. + */ +static inline unsigned long pwm_tdiv_div_bits(unsigned int div) +{ + return ilog2(div) - 1; +} + +#define S3C_TCFG1_MUX_TCLK S3C2410_TCFG1_MUX_TCLK + +#endif /* __ASM_ARCH_PWMCLK_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/regs-clock.h b/arch/arm/mach-s5pv210/include/mach/regs-clock.h new file mode 100644 index 00000000000..e56e0e4673e --- /dev/null +++ b/arch/arm/mach-s5pv210/include/mach/regs-clock.h @@ -0,0 +1,169 @@ +/* linux/arch/arm/mach-s5pv210/include/mach/regs-clock.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5PV210 - Clock register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_REGS_CLOCK_H +#define __ASM_ARCH_REGS_CLOCK_H __FILE__ + +#include <mach/map.h> + +#define S5P_CLKREG(x) (S3C_VA_SYS + (x)) + +#define S5P_APLL_LOCK S5P_CLKREG(0x00) +#define S5P_MPLL_LOCK S5P_CLKREG(0x08) +#define S5P_EPLL_LOCK S5P_CLKREG(0x10) +#define S5P_VPLL_LOCK S5P_CLKREG(0x20) + +#define S5P_APLL_CON S5P_CLKREG(0x100) +#define S5P_MPLL_CON S5P_CLKREG(0x108) +#define S5P_EPLL_CON S5P_CLKREG(0x110) +#define S5P_VPLL_CON S5P_CLKREG(0x120) + +#define S5P_CLK_SRC0 S5P_CLKREG(0x200) +#define S5P_CLK_SRC1 S5P_CLKREG(0x204) +#define S5P_CLK_SRC2 S5P_CLKREG(0x208) +#define S5P_CLK_SRC3 S5P_CLKREG(0x20C) +#define S5P_CLK_SRC4 S5P_CLKREG(0x210) +#define S5P_CLK_SRC5 S5P_CLKREG(0x214) +#define S5P_CLK_SRC6 S5P_CLKREG(0x218) + +#define S5P_CLK_SRC_MASK0 S5P_CLKREG(0x280) +#define S5P_CLK_SRC_MASK1 S5P_CLKREG(0x284) + +#define S5P_CLK_DIV0 S5P_CLKREG(0x300) +#define S5P_CLK_DIV1 S5P_CLKREG(0x304) +#define S5P_CLK_DIV2 S5P_CLKREG(0x308) +#define S5P_CLK_DIV3 S5P_CLKREG(0x30C) +#define S5P_CLK_DIV4 S5P_CLKREG(0x310) +#define S5P_CLK_DIV5 S5P_CLKREG(0x314) +#define S5P_CLK_DIV6 S5P_CLKREG(0x318) +#define S5P_CLK_DIV7 S5P_CLKREG(0x31C) + +#define S5P_CLKGATE_MAIN0 S5P_CLKREG(0x400) +#define S5P_CLKGATE_MAIN1 S5P_CLKREG(0x404) +#define S5P_CLKGATE_MAIN2 S5P_CLKREG(0x408) + +#define S5P_CLKGATE_PERI0 S5P_CLKREG(0x420) +#define S5P_CLKGATE_PERI1 S5P_CLKREG(0x424) + +#define S5P_CLKGATE_SCLK0 S5P_CLKREG(0x440) +#define S5P_CLKGATE_SCLK1 S5P_CLKREG(0x444) +#define S5P_CLKGATE_IP0 S5P_CLKREG(0x460) +#define S5P_CLKGATE_IP1 S5P_CLKREG(0x464) +#define S5P_CLKGATE_IP2 S5P_CLKREG(0x468) +#define S5P_CLKGATE_IP3 S5P_CLKREG(0x46C) +#define S5P_CLKGATE_IP4 S5P_CLKREG(0x470) + +#define S5P_CLKGATE_BLOCK S5P_CLKREG(0x480) +#define S5P_CLKGATE_BUS0 S5P_CLKREG(0x484) +#define S5P_CLKGATE_BUS1 S5P_CLKREG(0x488) +#define S5P_CLK_OUT S5P_CLKREG(0x500) + +/* CLKSRC0 */ +#define S5P_CLKSRC0_MUX200_MASK (0x1<<16) +#define S5P_CLKSRC0_MUX166_MASK (0x1<<20) +#define S5P_CLKSRC0_MUX133_MASK (0x1<<24) + +/* CLKDIV0 */ +#define S5P_CLKDIV0_APLL_SHIFT (0) +#define S5P_CLKDIV0_APLL_MASK (0x7 << S5P_CLKDIV0_APLL_SHIFT) +#define S5P_CLKDIV0_A2M_SHIFT (4) +#define S5P_CLKDIV0_A2M_MASK (0x7 << S5P_CLKDIV0_A2M_SHIFT) +#define S5P_CLKDIV0_HCLK200_SHIFT (8) +#define S5P_CLKDIV0_HCLK200_MASK (0x7 << S5P_CLKDIV0_HCLK200_SHIFT) +#define S5P_CLKDIV0_PCLK100_SHIFT (12) +#define S5P_CLKDIV0_PCLK100_MASK (0x7 << S5P_CLKDIV0_PCLK100_SHIFT) +#define S5P_CLKDIV0_HCLK166_SHIFT (16) +#define S5P_CLKDIV0_HCLK166_MASK (0xF << S5P_CLKDIV0_HCLK166_SHIFT) +#define S5P_CLKDIV0_PCLK83_SHIFT (20) +#define S5P_CLKDIV0_PCLK83_MASK (0x7 << S5P_CLKDIV0_PCLK83_SHIFT) +#define S5P_CLKDIV0_HCLK133_SHIFT (24) +#define S5P_CLKDIV0_HCLK133_MASK (0xF << S5P_CLKDIV0_HCLK133_SHIFT) +#define S5P_CLKDIV0_PCLK66_SHIFT (28) +#define S5P_CLKDIV0_PCLK66_MASK (0x7 << S5P_CLKDIV0_PCLK66_SHIFT) + +/* Registers related to power management */ +#define S5P_PWR_CFG S5P_CLKREG(0xC000) +#define S5P_EINT_WAKEUP_MASK S5P_CLKREG(0xC004) +#define S5P_WAKEUP_MASK S5P_CLKREG(0xC008) +#define S5P_PWR_MODE S5P_CLKREG(0xC00C) +#define S5P_NORMAL_CFG S5P_CLKREG(0xC010) +#define S5P_IDLE_CFG S5P_CLKREG(0xC020) +#define S5P_STOP_CFG S5P_CLKREG(0xC030) +#define S5P_STOP_MEM_CFG S5P_CLKREG(0xC034) +#define S5P_SLEEP_CFG S5P_CLKREG(0xC040) + +#define S5P_OSC_FREQ S5P_CLKREG(0xC100) +#define S5P_OSC_STABLE S5P_CLKREG(0xC104) +#define S5P_PWR_STABLE S5P_CLKREG(0xC108) +#define S5P_MTC_STABLE S5P_CLKREG(0xC110) +#define S5P_CLAMP_STABLE S5P_CLKREG(0xC114) + +#define S5P_WAKEUP_STAT S5P_CLKREG(0xC200) +#define S5P_BLK_PWR_STAT S5P_CLKREG(0xC204) + +#define S5P_OTHERS S5P_CLKREG(0xE000) +#define S5P_OM_STAT S5P_CLKREG(0xE100) +#define S5P_USB_PHY_CONTROL S5P_CLKREG(0xE80C) +#define S5P_DAC_CONTROL S5P_CLKREG(0xE810) + +#define S5P_INFORM0 S5P_CLKREG(0xF000) +#define S5P_INFORM1 S5P_CLKREG(0xF004) +#define S5P_INFORM2 S5P_CLKREG(0xF008) +#define S5P_INFORM3 S5P_CLKREG(0xF00C) +#define S5P_INFORM4 S5P_CLKREG(0xF010) +#define S5P_INFORM5 S5P_CLKREG(0xF014) +#define S5P_INFORM6 S5P_CLKREG(0xF018) +#define S5P_INFORM7 S5P_CLKREG(0xF01C) + +#define S5P_RST_STAT S5P_CLKREG(0xA000) +#define S5P_OSC_CON S5P_CLKREG(0x8000) +#define S5P_MIPI_PHY_CON0 S5P_CLKREG(0x7200) +#define S5P_MIPI_PHY_CON1 S5P_CLKREG(0x7204) +#define S5P_MIPI_CONTROL S5P_CLKREG(0xE814) + +#define S5P_IDLE_CFG_TL_MASK (3 << 30) +#define S5P_IDLE_CFG_TM_MASK (3 << 28) +#define S5P_IDLE_CFG_TL_ON (2 << 30) +#define S5P_IDLE_CFG_TM_ON (2 << 28) +#define S5P_IDLE_CFG_DIDLE (1 << 0) + +#define S5P_CFG_WFI_CLEAN (~(3 << 8)) +#define S5P_CFG_WFI_IDLE (1 << 8) +#define S5P_CFG_WFI_STOP (2 << 8) +#define S5P_CFG_WFI_SLEEP (3 << 8) + +#define S5P_OTHER_SYS_INT 24 +#define S5P_OTHER_STA_TYPE 23 +#define S5P_OTHER_SYSC_INTOFF (1 << 0) +#define STA_TYPE_EXPON 0 +#define STA_TYPE_SFR 1 + +#define S5P_PWR_STA_EXP_SCALE 0 +#define S5P_PWR_STA_CNT 4 + +#define S5P_PWR_STABLE_COUNT 85500 + +#define S5P_SLEEP_CFG_OSC_EN (1 << 0) +#define S5P_SLEEP_CFG_USBOSC_EN (1 << 1) + +/* OTHERS Resgister */ +#define S5P_OTHERS_USB_SIG_MASK (1 << 16) +#define S5P_OTHERS_MIPI_DPHY_EN (1 << 28) + +/* MIPI */ +#define S5P_MIPI_DPHY_EN (3) + +/* S5P_DAC_CONTROL */ +#define S5P_DAC_ENABLE (1) +#define S5P_DAC_DISABLE (0) + +#endif /* __ASM_ARCH_REGS_CLOCK_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/regs-irq.h b/arch/arm/mach-s5pv210/include/mach/regs-irq.h new file mode 100644 index 00000000000..5c3b104a7c8 --- /dev/null +++ b/arch/arm/mach-s5pv210/include/mach/regs-irq.h @@ -0,0 +1,19 @@ +/* linux/arch/arm/mach-s5pv210/include/mach/regs-irq.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5PV210 - IRQ register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_REGS_IRQ_H +#define __ASM_ARCH_REGS_IRQ_H __FILE__ + +#include <asm/hardware/vic.h> +#include <mach/map.h> + +#endif /* __ASM_ARCH_REGS_IRQ_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/system.h b/arch/arm/mach-s5pv210/include/mach/system.h new file mode 100644 index 00000000000..1ca04d5025b --- /dev/null +++ b/arch/arm/mach-s5pv210/include/mach/system.h @@ -0,0 +1,26 @@ +/* linux/arch/arm/mach-s5pv210/include/mach/system.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5PV210 - system support header + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H __FILE__ + +static void arch_idle(void) +{ + /* nothing here yet */ +} + +static void arch_reset(char mode, const char *cmd) +{ + /* nothing here yet */ +} + +#endif /* __ASM_ARCH_SYSTEM_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/tick.h b/arch/arm/mach-s5pv210/include/mach/tick.h new file mode 100644 index 00000000000..7993b3603cc --- /dev/null +++ b/arch/arm/mach-s5pv210/include/mach/tick.h @@ -0,0 +1,26 @@ +/* linux/arch/arm/mach-s5pv210/include/mach/tick.h + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Based on arch/arm/mach-s3c6400/include/mach/tick.h + * + * S5PV210 - Timer tick support definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_TICK_H +#define __ASM_ARCH_TICK_H __FILE__ + +static inline u32 s3c24xx_ostimer_pending(void) +{ + u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS); + return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0))); +} + +#define TICK_MAX (0xffffffff) + +#endif /* __ASM_ARCH_TICK_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/timex.h b/arch/arm/mach-s5pv210/include/mach/timex.h new file mode 100644 index 00000000000..73dc85496a8 --- /dev/null +++ b/arch/arm/mach-s5pv210/include/mach/timex.h @@ -0,0 +1,29 @@ +/* linux/arch/arm/mach-s5pv210/include/mach/timex.h + * + * Copyright (c) 2003-2010 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Based on arch/arm/mach-s5p6442/include/mach/timex.h + * + * S5PV210 - time parameters + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_TIMEX_H +#define __ASM_ARCH_TIMEX_H __FILE__ + +/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it + * a variable is useless. It seems as long as we make our timers an + * exact multiple of HZ, any value that makes a 1->1 correspondence + * for the time conversion functions to/from jiffies is acceptable. +*/ + +#define CLOCK_TICK_RATE 12000000 + +#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/uncompress.h b/arch/arm/mach-s5pv210/include/mach/uncompress.h new file mode 100644 index 00000000000..08ff2fda1fb --- /dev/null +++ b/arch/arm/mach-s5pv210/include/mach/uncompress.h @@ -0,0 +1,24 @@ +/* linux/arch/arm/mach-s5pv210/include/mach/uncompress.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5PV210 - uncompress code + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_UNCOMPRESS_H +#define __ASM_ARCH_UNCOMPRESS_H + +#include <mach/map.h> +#include <plat/uncompress.h> + +static void arch_detect_cpu(void) +{ + /* we do not need to do any cpu detection here at the moment. */ +} + +#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/vmalloc.h b/arch/arm/mach-s5pv210/include/mach/vmalloc.h new file mode 100644 index 00000000000..58f515e0747 --- /dev/null +++ b/arch/arm/mach-s5pv210/include/mach/vmalloc.h @@ -0,0 +1,22 @@ +/* linux/arch/arm/mach-s5p6442/include/mach/vmalloc.h + * + * Copyright 2010 Ben Dooks <ben-linux@fluff.org> + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Based on arch/arm/mach-s5p6442/include/mach/vmalloc.h + * + * S5PV210 vmalloc definition + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_VMALLOC_H +#define __ASM_ARCH_VMALLOC_H __FILE__ + +#define VMALLOC_END (0xE0000000) + +#endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/arch/arm/mach-s5pv210/init.c b/arch/arm/mach-s5pv210/init.c new file mode 100644 index 00000000000..4865ae2c475 --- /dev/null +++ b/arch/arm/mach-s5pv210/init.c @@ -0,0 +1,44 @@ +/* linux/arch/arm/mach-s5pv210/init.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/serial_core.h> + +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/s5pv210.h> +#include <plat/regs-serial.h> + +static struct s3c24xx_uart_clksrc s5pv210_serial_clocks[] = { + [0] = { + .name = "pclk", + .divisor = 1, + .min_baud = 0, + .max_baud = 0, + }, +}; + +/* uart registration process */ +void __init s5pv210_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) +{ + struct s3c2410_uartcfg *tcfg = cfg; + u32 ucnt; + + for (ucnt = 0; ucnt < no; ucnt++, tcfg++) { + if (!tcfg->clocks) { + tcfg->clocks = s5pv210_serial_clocks; + tcfg->clocks_size = ARRAY_SIZE(s5pv210_serial_clocks); + } + } + + s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no); +} diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c new file mode 100644 index 00000000000..ab4869df30c --- /dev/null +++ b/arch/arm/mach-s5pv210/mach-smdkc110.c @@ -0,0 +1,98 @@ +/* linux/arch/arm/mach-s5pv210/mach-smdkc110.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/serial_core.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/setup.h> +#include <asm/mach-types.h> + +#include <mach/map.h> +#include <mach/regs-clock.h> + +#include <plat/regs-serial.h> +#include <plat/s5pv210.h> +#include <plat/devs.h> +#include <plat/cpu.h> + +/* Following are default values for UCON, ULCON and UFCON UART registers */ +#define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI | \ + S3C2443_UCON_RXERR_IRQEN) + +#define S5PV210_ULCON_DEFAULT S3C2410_LCON_CS8 + +#define S5PV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S5PV210_UFCON_TXTRIG4 | \ + S5PV210_UFCON_RXTRIG4) + +static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = S5PV210_UCON_DEFAULT, + .ulcon = S5PV210_ULCON_DEFAULT, + .ufcon = S5PV210_UFCON_DEFAULT, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = S5PV210_UCON_DEFAULT, + .ulcon = S5PV210_ULCON_DEFAULT, + .ufcon = S5PV210_UFCON_DEFAULT, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = S5PV210_UCON_DEFAULT, + .ulcon = S5PV210_ULCON_DEFAULT, + .ufcon = S5PV210_UFCON_DEFAULT, + }, + [3] = { + .hwport = 3, + .flags = 0, + .ucon = S5PV210_UCON_DEFAULT, + .ulcon = S5PV210_ULCON_DEFAULT, + .ufcon = S5PV210_UFCON_DEFAULT, + }, +}; + +static struct platform_device *smdkc110_devices[] __initdata = { +}; + +static void __init smdkc110_map_io(void) +{ + s5p_init_io(NULL, 0, S5P_VA_CHIPID); + s3c24xx_init_clocks(24000000); + s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs)); +} + +static void __init smdkc110_machine_init(void) +{ + platform_add_devices(smdkc110_devices, ARRAY_SIZE(smdkc110_devices)); +} + +MACHINE_START(SMDKC110, "SMDKC110") + /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ + .phys_io = S3C_PA_UART & 0xfff00000, + .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, + .boot_params = S5P_PA_SDRAM + 0x100, + .init_irq = s5pv210_init_irq, + .map_io = smdkc110_map_io, + .init_machine = smdkc110_machine_init, + .timer = &s3c24xx_timer, +MACHINE_END diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c new file mode 100644 index 00000000000..a2788325320 --- /dev/null +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -0,0 +1,98 @@ +/* linux/arch/arm/mach-s5pv210/mach-smdkv210.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/serial_core.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/setup.h> +#include <asm/mach-types.h> + +#include <mach/map.h> +#include <mach/regs-clock.h> + +#include <plat/regs-serial.h> +#include <plat/s5pv210.h> +#include <plat/devs.h> +#include <plat/cpu.h> + +/* Following are default values for UCON, ULCON and UFCON UART registers */ +#define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI | \ + S3C2443_UCON_RXERR_IRQEN) + +#define S5PV210_ULCON_DEFAULT S3C2410_LCON_CS8 + +#define S5PV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S5PV210_UFCON_TXTRIG4 | \ + S5PV210_UFCON_RXTRIG4) + +static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = S5PV210_UCON_DEFAULT, + .ulcon = S5PV210_ULCON_DEFAULT, + .ufcon = S5PV210_UFCON_DEFAULT, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = S5PV210_UCON_DEFAULT, + .ulcon = S5PV210_ULCON_DEFAULT, + .ufcon = S5PV210_UFCON_DEFAULT, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = S5PV210_UCON_DEFAULT, + .ulcon = S5PV210_ULCON_DEFAULT, + .ufcon = S5PV210_UFCON_DEFAULT, + }, + [3] = { + .hwport = 3, + .flags = 0, + .ucon = S5PV210_UCON_DEFAULT, + .ulcon = S5PV210_ULCON_DEFAULT, + .ufcon = S5PV210_UFCON_DEFAULT, + }, +}; + +static struct platform_device *smdkv210_devices[] __initdata = { +}; + +static void __init smdkv210_map_io(void) +{ + s5p_init_io(NULL, 0, S5P_VA_CHIPID); + s3c24xx_init_clocks(24000000); + s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs)); +} + +static void __init smdkv210_machine_init(void) +{ + platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices)); +} + +MACHINE_START(SMDKV210, "SMDKV210") + /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ + .phys_io = S3C_PA_UART & 0xfff00000, + .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, + .boot_params = S5P_PA_SDRAM + 0x100, + .init_irq = s5pv210_init_irq, + .map_io = smdkv210_map_io, + .init_machine = smdkv210_machine_init, + .timer = &s3c24xx_timer, +MACHINE_END diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c index 051ec0f0023..259cb2c15ff 100644 --- a/arch/arm/mach-sa1100/badge4.c +++ b/arch/arm/mach-sa1100/badge4.c @@ -51,6 +51,10 @@ static struct resource sa1111_resources[] = { }, }; +static struct sa1111_platform_data sa1111_info = { + .irq_base = IRQ_BOARD_END, +}; + static u64 sa1111_dmamask = 0xffffffffUL; static struct platform_device sa1111_device = { @@ -59,6 +63,7 @@ static struct platform_device sa1111_device = { .dev = { .dma_mask = &sa1111_dmamask, .coherent_dma_mask = 0xffffffff, + .platform_data = &sa1111_info, }, .num_resources = ARRAY_SIZE(sa1111_resources), .resource = sa1111_resources, diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index 9982c5c28ed..5d5f330c5d9 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -234,6 +234,10 @@ static struct resource locomo_resources[] = { }, }; +static struct locomo_platform_data locomo_info = { + .irq_base = IRQ_BOARD_START, +}; + struct platform_device collie_locomo_device = { .name = "locomo", .id = 0, diff --git a/arch/arm/mach-sa1100/include/mach/collie.h b/arch/arm/mach-sa1100/include/mach/collie.h index 71a0b3fdcc8..52acda7061b 100644 --- a/arch/arm/mach-sa1100/include/mach/collie.h +++ b/arch/arm/mach-sa1100/include/mach/collie.h @@ -72,13 +72,6 @@ #define COLLIE_IRQ_GPIO_GA_INT IRQ_GPIO25 #define COLLIE_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO26 -#define COLLIE_LCM_IRQ_GPIO_RTS IRQ_LOCOMO_GPIO0 -#define COLLIE_LCM_IRQ_GPIO_CTS IRQ_LOCOMO_GPIO1 -#define COLLIE_LCM_IRQ_GPIO_DSR IRQ_LOCOMO_GPIO2 -#define COLLIE_LCM_IRQ_GPIO_DTR IRQ_LOCOMO_GPIO3 -#define COLLIE_LCM_IRQ_GPIO_nSD_DETECT IRQ_LOCOMO_GPIO13 -#define COLLIE_LCM_IRQ_GPIO_nSD_WP IRQ_LOCOMO_GPIO14 - /* GPIO's on the TC35143AF (Toshiba Analog Frontend) */ #define COLLIE_TC35143_GPIO_BASE (GPIO_MAX + 13) #define COLLIE_TC35143_GPIO_VERSION0 UCB_IO_0 diff --git a/arch/arm/mach-sa1100/include/mach/irqs.h b/arch/arm/mach-sa1100/include/mach/irqs.h index ae81f80b0cf..8c8845b5ae5 100644 --- a/arch/arm/mach-sa1100/include/mach/irqs.h +++ b/arch/arm/mach-sa1100/include/mach/irqs.h @@ -68,93 +68,17 @@ #define IRQ_BOARD_START 49 #define IRQ_BOARD_END 65 -#define IRQ_SA1111_START (IRQ_BOARD_END) -#define IRQ_GPAIN0 (IRQ_BOARD_END + 0) -#define IRQ_GPAIN1 (IRQ_BOARD_END + 1) -#define IRQ_GPAIN2 (IRQ_BOARD_END + 2) -#define IRQ_GPAIN3 (IRQ_BOARD_END + 3) -#define IRQ_GPBIN0 (IRQ_BOARD_END + 4) -#define IRQ_GPBIN1 (IRQ_BOARD_END + 5) -#define IRQ_GPBIN2 (IRQ_BOARD_END + 6) -#define IRQ_GPBIN3 (IRQ_BOARD_END + 7) -#define IRQ_GPBIN4 (IRQ_BOARD_END + 8) -#define IRQ_GPBIN5 (IRQ_BOARD_END + 9) -#define IRQ_GPCIN0 (IRQ_BOARD_END + 10) -#define IRQ_GPCIN1 (IRQ_BOARD_END + 11) -#define IRQ_GPCIN2 (IRQ_BOARD_END + 12) -#define IRQ_GPCIN3 (IRQ_BOARD_END + 13) -#define IRQ_GPCIN4 (IRQ_BOARD_END + 14) -#define IRQ_GPCIN5 (IRQ_BOARD_END + 15) -#define IRQ_GPCIN6 (IRQ_BOARD_END + 16) -#define IRQ_GPCIN7 (IRQ_BOARD_END + 17) -#define IRQ_MSTXINT (IRQ_BOARD_END + 18) -#define IRQ_MSRXINT (IRQ_BOARD_END + 19) -#define IRQ_MSSTOPERRINT (IRQ_BOARD_END + 20) -#define IRQ_TPTXINT (IRQ_BOARD_END + 21) -#define IRQ_TPRXINT (IRQ_BOARD_END + 22) -#define IRQ_TPSTOPERRINT (IRQ_BOARD_END + 23) -#define SSPXMTINT (IRQ_BOARD_END + 24) -#define SSPRCVINT (IRQ_BOARD_END + 25) -#define SSPROR (IRQ_BOARD_END + 26) -#define AUDXMTDMADONEA (IRQ_BOARD_END + 32) -#define AUDRCVDMADONEA (IRQ_BOARD_END + 33) -#define AUDXMTDMADONEB (IRQ_BOARD_END + 34) -#define AUDRCVDMADONEB (IRQ_BOARD_END + 35) -#define AUDTFSR (IRQ_BOARD_END + 36) -#define AUDRFSR (IRQ_BOARD_END + 37) -#define AUDTUR (IRQ_BOARD_END + 38) -#define AUDROR (IRQ_BOARD_END + 39) -#define AUDDTS (IRQ_BOARD_END + 40) -#define AUDRDD (IRQ_BOARD_END + 41) -#define AUDSTO (IRQ_BOARD_END + 42) -#define IRQ_USBPWR (IRQ_BOARD_END + 43) -#define IRQ_HCIM (IRQ_BOARD_END + 44) -#define IRQ_HCIBUFFACC (IRQ_BOARD_END + 45) -#define IRQ_HCIRMTWKP (IRQ_BOARD_END + 46) -#define IRQ_NHCIMFCIR (IRQ_BOARD_END + 47) -#define IRQ_USB_PORT_RESUME (IRQ_BOARD_END + 48) -#define IRQ_S0_READY_NINT (IRQ_BOARD_END + 49) -#define IRQ_S1_READY_NINT (IRQ_BOARD_END + 50) -#define IRQ_S0_CD_VALID (IRQ_BOARD_END + 51) -#define IRQ_S1_CD_VALID (IRQ_BOARD_END + 52) -#define IRQ_S0_BVD1_STSCHG (IRQ_BOARD_END + 53) -#define IRQ_S1_BVD1_STSCHG (IRQ_BOARD_END + 54) - -#define IRQ_LOCOMO_START (IRQ_BOARD_END) -#define IRQ_LOCOMO_KEY (IRQ_BOARD_END + 0) -#define IRQ_LOCOMO_GPIO0 (IRQ_BOARD_END + 1) -#define IRQ_LOCOMO_GPIO1 (IRQ_BOARD_END + 2) -#define IRQ_LOCOMO_GPIO2 (IRQ_BOARD_END + 3) -#define IRQ_LOCOMO_GPIO3 (IRQ_BOARD_END + 4) -#define IRQ_LOCOMO_GPIO4 (IRQ_BOARD_END + 5) -#define IRQ_LOCOMO_GPIO5 (IRQ_BOARD_END + 6) -#define IRQ_LOCOMO_GPIO6 (IRQ_BOARD_END + 7) -#define IRQ_LOCOMO_GPIO7 (IRQ_BOARD_END + 8) -#define IRQ_LOCOMO_GPIO8 (IRQ_BOARD_END + 9) -#define IRQ_LOCOMO_GPIO9 (IRQ_BOARD_END + 10) -#define IRQ_LOCOMO_GPIO10 (IRQ_BOARD_END + 11) -#define IRQ_LOCOMO_GPIO11 (IRQ_BOARD_END + 12) -#define IRQ_LOCOMO_GPIO12 (IRQ_BOARD_END + 13) -#define IRQ_LOCOMO_GPIO13 (IRQ_BOARD_END + 14) -#define IRQ_LOCOMO_GPIO14 (IRQ_BOARD_END + 15) -#define IRQ_LOCOMO_GPIO15 (IRQ_BOARD_END + 16) -#define IRQ_LOCOMO_LT (IRQ_BOARD_END + 17) -#define IRQ_LOCOMO_SPI_RFR (IRQ_BOARD_END + 18) -#define IRQ_LOCOMO_SPI_RFW (IRQ_BOARD_END + 19) -#define IRQ_LOCOMO_SPI_REND (IRQ_BOARD_END + 20) -#define IRQ_LOCOMO_SPI_TEND (IRQ_BOARD_END + 21) - /* * Figure out the MAX IRQ number. * * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1. - * If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1 + * If we have an LoCoMo, the max IRQ is IRQ_BOARD_START + 4 * Otherwise, we have the standard IRQs only. */ #ifdef CONFIG_SA1111 -#define NR_IRQS (IRQ_S1_BVD1_STSCHG + 1) -#elif defined(CONFIG_SHARP_LOCOMO) -#define NR_IRQS (IRQ_LOCOMO_SPI_TEND + 1) +#define NR_IRQS (IRQ_BOARD_END + 55) +#elif defined(CONFIG_SHARPSL_LOCOMO) +#define NR_IRQS (IRQ_BOARD_START + 4) #else #define NR_IRQS (IRQ_BOARD_START) #endif @@ -166,10 +90,3 @@ #define IRQ_NEPONSET_SMC9196 (IRQ_BOARD_START + 0) #define IRQ_NEPONSET_USAR (IRQ_BOARD_START + 1) #define IRQ_NEPONSET_SA1111 (IRQ_BOARD_START + 2) - -/* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */ -#define IRQ_LOCOMO_KEY_BASE (IRQ_BOARD_START + 0) -#define IRQ_LOCOMO_GPIO_BASE (IRQ_BOARD_START + 1) -#define IRQ_LOCOMO_LT_BASE (IRQ_BOARD_START + 2) -#define IRQ_LOCOMO_SPI_BASE (IRQ_BOARD_START + 3) - diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c index 13ebd2d99bf..d3ec620618f 100644 --- a/arch/arm/mach-sa1100/jornada720.c +++ b/arch/arm/mach-sa1100/jornada720.c @@ -208,6 +208,10 @@ static struct resource sa1111_resources[] = { }, }; +static struct sa1111_platform_data sa1111_info = { + .irq_base = IRQ_BOARD_END, +}; + static u64 sa1111_dmamask = 0xffffffffUL; static struct platform_device sa1111_device = { @@ -216,6 +220,7 @@ static struct platform_device sa1111_device = { .dev = { .dma_mask = &sa1111_dmamask, .coherent_dma_mask = 0xffffffff, + .platform_data = &sa1111_info, }, .num_resources = ARRAY_SIZE(sa1111_resources), .resource = sa1111_resources, diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c index 6ccd175bc4c..0b505d9f22d 100644 --- a/arch/arm/mach-sa1100/neponset.c +++ b/arch/arm/mach-sa1100/neponset.c @@ -241,6 +241,10 @@ static struct resource sa1111_resources[] = { }, }; +static struct sa1111_platform_data sa1111_info = { + .irq_base = IRQ_BOARD_END, +}; + static u64 sa1111_dmamask = 0xffffffffUL; static struct platform_device sa1111_device = { @@ -249,6 +253,7 @@ static struct platform_device sa1111_device = { .dev = { .dma_mask = &sa1111_dmamask, .coherent_dma_mask = 0xffffffff, + .platform_data = &sa1111_info, }, .num_resources = ARRAY_SIZE(sa1111_resources), .resource = sa1111_resources, diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c index b9cbb56d6e9..74b6e0e570b 100644 --- a/arch/arm/mach-sa1100/time.c +++ b/arch/arm/mach-sa1100/time.c @@ -35,14 +35,12 @@ static irqreturn_t sa1100_ost0_interrupt(int irq, void *dev_id) static int sa1100_osmr0_set_next_event(unsigned long delta, struct clock_event_device *c) { - unsigned long flags, next, oscr; + unsigned long next, oscr; - raw_local_irq_save(flags); OIER |= OIER_E0; next = OSCR + delta; OSMR0 = next; oscr = OSCR; - raw_local_irq_restore(flags); return (signed)(next - oscr) <= MIN_OSCR_DELTA ? -ETIME : 0; } @@ -50,16 +48,12 @@ sa1100_osmr0_set_next_event(unsigned long delta, struct clock_event_device *c) static void sa1100_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *c) { - unsigned long flags; - switch (mode) { case CLOCK_EVT_MODE_ONESHOT: case CLOCK_EVT_MODE_UNUSED: case CLOCK_EVT_MODE_SHUTDOWN: - raw_local_irq_save(flags); OIER &= ~OIER_E0; OSSR = OSSR_M0; - raw_local_irq_restore(flags); break; case CLOCK_EVT_MODE_RESUME: diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig new file mode 100644 index 00000000000..aeceb9b92ae --- /dev/null +++ b/arch/arm/mach-shmobile/Kconfig @@ -0,0 +1,84 @@ +if ARCH_SHMOBILE + +comment "SH-Mobile System Type" + +config ARCH_SH7367 + bool "SH-Mobile G3 (SH7367)" + select CPU_V6 + select HAVE_CLK + select COMMON_CLKDEV + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + +config ARCH_SH7377 + bool "SH-Mobile G4 (SH7377)" + select CPU_V7 + select HAVE_CLK + select COMMON_CLKDEV + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + +config ARCH_SH7372 + bool "SH-Mobile AP4 (SH7372)" + select CPU_V7 + select HAVE_CLK + select COMMON_CLKDEV + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + +comment "SH-Mobile Board Type" + +config MACH_G3EVM + bool "G3EVM board" + depends on ARCH_SH7367 + select ARCH_REQUIRE_GPIOLIB + +config MACH_G4EVM + bool "G4EVM board" + depends on ARCH_SH7377 + select ARCH_REQUIRE_GPIOLIB + +config MACH_AP4EVB + bool "AP4EVB board" + depends on ARCH_SH7372 + select ARCH_REQUIRE_GPIOLIB + +comment "SH-Mobile System Configuration" + +menu "Memory configuration" + +config MEMORY_START + hex "Physical memory start address" + default "0x50000000" if MACH_G3EVM + default "0x40000000" if MACH_G4EVM + default "0x40000000" if MACH_AP4EVB + default "0x00000000" + ---help--- + Tweak this only when porting to a new machine which does not + already have a defconfig. Changing it from the known correct + value on any of the known systems will only lead to disaster. + +config MEMORY_SIZE + hex "Physical memory size" + default "0x08000000" if MACH_G3EVM + default "0x08000000" if MACH_G4EVM + default "0x10000000" if MACH_AP4EVB + default "0x04000000" + help + This sets the default memory size assumed by your kernel. It can + be overridden as normal by the 'mem=' argument on the kernel command + line. + +endmenu + +menu "Timer and clock configuration" + +config SH_TIMER_CMT + bool "CMT timer driver" + default y + help + This enables build of the CMT timer driver. + +endmenu + +endif diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile new file mode 100644 index 00000000000..6d385d371c3 --- /dev/null +++ b/arch/arm/mach-shmobile/Makefile @@ -0,0 +1,22 @@ +# +# Makefile for the linux kernel. +# + +# Common objects +obj-y := timer.o console.o + +# CPU objects +obj-$(CONFIG_ARCH_SH7367) += setup-sh7367.o clock-sh7367.o intc-sh7367.o +obj-$(CONFIG_ARCH_SH7377) += setup-sh7377.o clock-sh7367.o intc-sh7377.o +obj-$(CONFIG_ARCH_SH7372) += setup-sh7372.o clock-sh7367.o intc-sh7372.o + +# Pinmux setup +pfc-$(CONFIG_ARCH_SH7367) := pfc-sh7367.o +pfc-$(CONFIG_ARCH_SH7377) := pfc-sh7377.o +pfc-$(CONFIG_ARCH_SH7372) := pfc-sh7372.o +obj-$(CONFIG_GENERIC_GPIO) += $(pfc-y) + +# Board objects +obj-$(CONFIG_MACH_G3EVM) += board-g3evm.o +obj-$(CONFIG_MACH_G4EVM) += board-g4evm.o +obj-$(CONFIG_MACH_AP4EVB) += board-ap4evb.o diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot new file mode 100644 index 00000000000..1c08ee9de86 --- /dev/null +++ b/arch/arm/mach-shmobile/Makefile.boot @@ -0,0 +1,9 @@ +__ZRELADDR := $(shell /bin/bash -c 'printf "0x%08x" \ + $$[$(CONFIG_MEMORY_START) + 0x8000]') + + zreladdr-y := $(__ZRELADDR) + +# Unsupported legacy stuff +# +#params_phys-y (Instead: Pass atags pointer in r2) +#initrd_phys-y (Instead: Use compiled-in initramfs) diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c new file mode 100644 index 00000000000..a0463d92644 --- /dev/null +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -0,0 +1,301 @@ +/* + * AP4EVB board support + * + * Copyright (C) 2010 Magnus Damm + * Copyright (C) 2008 Yoshihiro Shimoda + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/io.h> +#include <linux/smsc911x.h> +#include <linux/gpio.h> +#include <linux/input.h> +#include <linux/input/sh_keysc.h> +#include <mach/common.h> +#include <mach/sh7372.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +/* + * Address Interface BusWidth note + * ------------------------------------------------------------------ + * 0x0000_0000 NOR Flash ROM (MCP) 16bit SW7 : bit1 = ON + * 0x0800_0000 user area - + * 0x1000_0000 NOR Flash ROM (MCP) 16bit SW7 : bit1 = OFF + * 0x1400_0000 Ether (LAN9220) 16bit + * 0x1600_0000 user area - cannot use with NAND + * 0x1800_0000 user area - + * 0x1A00_0000 - + * 0x4000_0000 LPDDR2-SDRAM (POP) 32bit + */ + +/* + * NOR Flash ROM + * + * SW1 | SW2 | SW7 | NOR Flash ROM + * bit1 | bit1 bit2 | bit1 | Memory allocation + * ------+------------+------+------------------ + * OFF | ON OFF | ON | Area 0 + * OFF | ON OFF | OFF | Area 4 + */ + +/* + * NAND Flash ROM + * + * SW1 | SW2 | SW7 | NAND Flash ROM + * bit1 | bit1 bit2 | bit2 | Memory allocation + * ------+------------+------+------------------ + * OFF | ON OFF | ON | FCE 0 + * OFF | ON OFF | OFF | FCE 1 + */ + +/* + * SMSC 9220 + * + * SW1 SMSC 9220 + * ----------------------- + * ON access disable + * OFF access enable + */ + +/* + * KEYSC + * + * SW43 KEYSC + * ------------------------- + * ON enable + * OFF disable + */ + +/* MTD */ +static struct mtd_partition nor_flash_partitions[] = { + { + .name = "loader", + .offset = 0x00000000, + .size = 512 * 1024, + }, + { + .name = "bootenv", + .offset = MTDPART_OFS_APPEND, + .size = 512 * 1024, + }, + { + .name = "kernel_ro", + .offset = MTDPART_OFS_APPEND, + .size = 8 * 1024 * 1024, + .mask_flags = MTD_WRITEABLE, + }, + { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = 8 * 1024 * 1024, + }, + { + .name = "data", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data nor_flash_data = { + .width = 2, + .parts = nor_flash_partitions, + .nr_parts = ARRAY_SIZE(nor_flash_partitions), +}; + +static struct resource nor_flash_resources[] = { + [0] = { + .start = 0x00000000, + .end = 0x08000000 - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device nor_flash_device = { + .name = "physmap-flash", + .dev = { + .platform_data = &nor_flash_data, + }, + .num_resources = ARRAY_SIZE(nor_flash_resources), + .resource = nor_flash_resources, +}; + +/* SMSC 9220 */ +static struct resource smc911x_resources[] = { + { + .start = 0x14000000, + .end = 0x16000000 - 1, + .flags = IORESOURCE_MEM, + }, { + .start = 6, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, + }, +}; + +static struct smsc911x_platform_config smsc911x_info = { + .flags = SMSC911X_USE_16BIT | SMSC911X_SAVE_MAC_ADDRESS, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, +}; + +static struct platform_device smc911x_device = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(smc911x_resources), + .resource = smc911x_resources, + .dev = { + .platform_data = &smsc911x_info, + }, +}; + +/* KEYSC (Needs SW43 set to ON) */ +static struct sh_keysc_info keysc_info = { + .mode = SH_KEYSC_MODE_1, + .scan_timing = 3, + .delay = 2500, + .keycodes = { + KEY_0, KEY_1, KEY_2, KEY_3, KEY_4, + KEY_5, KEY_6, KEY_7, KEY_8, KEY_9, + KEY_A, KEY_B, KEY_C, KEY_D, KEY_E, + KEY_F, KEY_G, KEY_H, KEY_I, KEY_J, + KEY_K, KEY_L, KEY_M, KEY_N, KEY_O, + }, +}; + +static struct resource keysc_resources[] = { + [0] = { + .name = "KEYSC", + .start = 0xe61b0000, + .end = 0xe61b0063, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 79, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device keysc_device = { + .name = "sh_keysc", + .id = 0, /* "keysc0" clock */ + .num_resources = ARRAY_SIZE(keysc_resources), + .resource = keysc_resources, + .dev = { + .platform_data = &keysc_info, + }, +}; + +static struct platform_device *ap4evb_devices[] __initdata = { + &nor_flash_device, + &smc911x_device, + &keysc_device, +}; + +static struct map_desc ap4evb_io_desc[] __initdata = { + /* create a 1:1 entity map for 0xe6xxxxxx + * used by CPGA, INTC and PFC. + */ + { + .virtual = 0xe6000000, + .pfn = __phys_to_pfn(0xe6000000), + .length = 256 << 20, + .type = MT_DEVICE_NONSHARED + }, +}; + +static void __init ap4evb_map_io(void) +{ + iotable_init(ap4evb_io_desc, ARRAY_SIZE(ap4evb_io_desc)); + + /* setup early devices, clocks and console here as well */ + sh7372_add_early_devices(); + sh7367_clock_init(); /* use g3 clocks for now */ + shmobile_setup_console(); +} + +static void __init ap4evb_init(void) +{ + sh7372_pinmux_init(); + + /* enable SCIFA0 */ + gpio_request(GPIO_FN_SCIFA0_TXD, NULL); + gpio_request(GPIO_FN_SCIFA0_RXD, NULL); + + /* enable SMSC911X */ + gpio_request(GPIO_FN_CS5A, NULL); + gpio_request(GPIO_FN_IRQ6_39, NULL); + + /* enable LED 1 - 4 */ + gpio_request(GPIO_PORT185, NULL); + gpio_request(GPIO_PORT186, NULL); + gpio_request(GPIO_PORT187, NULL); + gpio_request(GPIO_PORT188, NULL); + gpio_direction_output(GPIO_PORT185, 1); + gpio_direction_output(GPIO_PORT186, 1); + gpio_direction_output(GPIO_PORT187, 1); + gpio_direction_output(GPIO_PORT188, 1); + gpio_export(GPIO_PORT185, 0); + gpio_export(GPIO_PORT186, 0); + gpio_export(GPIO_PORT187, 0); + gpio_export(GPIO_PORT188, 0); + + /* enable Debug switch (S6) */ + gpio_request(GPIO_PORT32, NULL); + gpio_request(GPIO_PORT33, NULL); + gpio_request(GPIO_PORT34, NULL); + gpio_request(GPIO_PORT35, NULL); + gpio_direction_input(GPIO_PORT32); + gpio_direction_input(GPIO_PORT33); + gpio_direction_input(GPIO_PORT34); + gpio_direction_input(GPIO_PORT35); + gpio_export(GPIO_PORT32, 0); + gpio_export(GPIO_PORT33, 0); + gpio_export(GPIO_PORT34, 0); + gpio_export(GPIO_PORT35, 0); + + /* enable KEYSC */ + gpio_request(GPIO_FN_KEYOUT0, NULL); + gpio_request(GPIO_FN_KEYOUT1, NULL); + gpio_request(GPIO_FN_KEYOUT2, NULL); + gpio_request(GPIO_FN_KEYOUT3, NULL); + gpio_request(GPIO_FN_KEYOUT4, NULL); + gpio_request(GPIO_FN_KEYIN0_136, NULL); + gpio_request(GPIO_FN_KEYIN1_135, NULL); + gpio_request(GPIO_FN_KEYIN2_134, NULL); + gpio_request(GPIO_FN_KEYIN3_133, NULL); + gpio_request(GPIO_FN_KEYIN4, NULL); + + sh7372_add_standard_devices(); + + platform_add_devices(ap4evb_devices, ARRAY_SIZE(ap4evb_devices)); +} + +MACHINE_START(AP4EVB, "ap4evb") + .phys_io = 0xe6000000, + .io_pg_offst = ((0xe6000000) >> 18) & 0xfffc, + .map_io = ap4evb_map_io, + .init_irq = sh7372_init_irq, + .init_machine = ap4evb_init, + .timer = &shmobile_timer, +MACHINE_END diff --git a/arch/arm/mach-shmobile/board-g3evm.c b/arch/arm/mach-shmobile/board-g3evm.c new file mode 100644 index 00000000000..f36c9a94d32 --- /dev/null +++ b/arch/arm/mach-shmobile/board-g3evm.c @@ -0,0 +1,211 @@ +/* + * G3EVM board support + * + * Copyright (C) 2010 Magnus Damm + * Copyright (C) 2008 Yoshihiro Shimoda + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/usb/r8a66597.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <mach/sh7367.h> +#include <mach/common.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +static struct mtd_partition nor_flash_partitions[] = { + { + .name = "loader", + .offset = 0x00000000, + .size = 512 * 1024, + }, + { + .name = "bootenv", + .offset = MTDPART_OFS_APPEND, + .size = 512 * 1024, + }, + { + .name = "kernel_ro", + .offset = MTDPART_OFS_APPEND, + .size = 8 * 1024 * 1024, + .mask_flags = MTD_WRITEABLE, + }, + { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = 8 * 1024 * 1024, + }, + { + .name = "data", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data nor_flash_data = { + .width = 2, + .parts = nor_flash_partitions, + .nr_parts = ARRAY_SIZE(nor_flash_partitions), +}; + +static struct resource nor_flash_resources[] = { + [0] = { + .start = 0x00000000, + .end = 0x08000000 - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device nor_flash_device = { + .name = "physmap-flash", + .dev = { + .platform_data = &nor_flash_data, + }, + .num_resources = ARRAY_SIZE(nor_flash_resources), + .resource = nor_flash_resources, +}; + +/* USBHS */ +void usb_host_port_power(int port, int power) +{ + if (!power) /* only power-on supported for now */ + return; + + /* set VBOUT/PWEN and EXTLP0 in DVSTCTR */ + __raw_writew(__raw_readw(0xe6890008) | 0x600, 0xe6890008); +} + +static struct r8a66597_platdata usb_host_data = { + .on_chip = 1, + .port_power = usb_host_port_power, +}; + +static struct resource usb_host_resources[] = { + [0] = { + .name = "USBHS", + .start = 0xe6890000, + .end = 0xe68900e5, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 65, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device usb_host_device = { + .name = "r8a66597_hcd", + .id = 0, + .dev = { + .platform_data = &usb_host_data, + .dma_mask = NULL, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(usb_host_resources), + .resource = usb_host_resources, +}; + +static struct platform_device *g3evm_devices[] __initdata = { + &nor_flash_device, + &usb_host_device, +}; + +static struct map_desc g3evm_io_desc[] __initdata = { + /* create a 1:1 entity map for 0xe6xxxxxx + * used by CPGA, INTC and PFC. + */ + { + .virtual = 0xe6000000, + .pfn = __phys_to_pfn(0xe6000000), + .length = 256 << 20, + .type = MT_DEVICE_NONSHARED + }, +}; + +static void __init g3evm_map_io(void) +{ + iotable_init(g3evm_io_desc, ARRAY_SIZE(g3evm_io_desc)); + + /* setup early devices, clocks and console here as well */ + sh7367_add_early_devices(); + sh7367_clock_init(); + shmobile_setup_console(); +} + +static void __init g3evm_init(void) +{ + sh7367_pinmux_init(); + + /* Lit DS4 LED */ + gpio_request(GPIO_PORT22, NULL); + gpio_direction_output(GPIO_PORT22, 1); + gpio_export(GPIO_PORT22, 0); + + /* Lit DS8 LED */ + gpio_request(GPIO_PORT23, NULL); + gpio_direction_output(GPIO_PORT23, 1); + gpio_export(GPIO_PORT23, 0); + + /* Lit DS3 LED */ + gpio_request(GPIO_PORT24, NULL); + gpio_direction_output(GPIO_PORT24, 1); + gpio_export(GPIO_PORT24, 0); + + /* SCIFA1 */ + gpio_request(GPIO_FN_SCIFA1_TXD, NULL); + gpio_request(GPIO_FN_SCIFA1_RXD, NULL); + gpio_request(GPIO_FN_SCIFA1_CTS, NULL); + gpio_request(GPIO_FN_SCIFA1_RTS, NULL); + + /* USBHS */ + gpio_request(GPIO_FN_VBUS0, NULL); + gpio_request(GPIO_FN_PWEN, NULL); + gpio_request(GPIO_FN_OVCN, NULL); + gpio_request(GPIO_FN_OVCN2, NULL); + gpio_request(GPIO_FN_EXTLP, NULL); + gpio_request(GPIO_FN_IDIN, NULL); + + /* enable clock in SYMSTPCR2 */ + __raw_writel(__raw_readl(0xe6158048) & ~(1 << 22), 0xe6158048); + + /* setup USB phy */ + __raw_writew(0x0300, 0xe605810a); /* USBCR1 */ + __raw_writew(0x00e0, 0xe60581c0); /* CPFCH */ + __raw_writew(0x6010, 0xe60581c6); /* CGPOSR */ + __raw_writew(0x8a0a, 0xe605810c); /* USBCR2 */ + + sh7367_add_standard_devices(); + + platform_add_devices(g3evm_devices, ARRAY_SIZE(g3evm_devices)); +} + +MACHINE_START(G3EVM, "g3evm") + .phys_io = 0xe6000000, + .io_pg_offst = ((0xe6000000) >> 18) & 0xfffc, + .map_io = g3evm_map_io, + .init_irq = sh7367_init_irq, + .init_machine = g3evm_init, + .timer = &shmobile_timer, +MACHINE_END diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c new file mode 100644 index 00000000000..5acd623f93e --- /dev/null +++ b/arch/arm/mach-shmobile/board-g4evm.c @@ -0,0 +1,211 @@ +/* + * G4EVM board support + * + * Copyright (C) 2010 Magnus Damm + * Copyright (C) 2008 Yoshihiro Shimoda + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/usb/r8a66597.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <mach/sh7377.h> +#include <mach/common.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +static struct mtd_partition nor_flash_partitions[] = { + { + .name = "loader", + .offset = 0x00000000, + .size = 512 * 1024, + }, + { + .name = "bootenv", + .offset = MTDPART_OFS_APPEND, + .size = 512 * 1024, + }, + { + .name = "kernel_ro", + .offset = MTDPART_OFS_APPEND, + .size = 8 * 1024 * 1024, + .mask_flags = MTD_WRITEABLE, + }, + { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = 8 * 1024 * 1024, + }, + { + .name = "data", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data nor_flash_data = { + .width = 2, + .parts = nor_flash_partitions, + .nr_parts = ARRAY_SIZE(nor_flash_partitions), +}; + +static struct resource nor_flash_resources[] = { + [0] = { + .start = 0x00000000, + .end = 0x08000000 - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device nor_flash_device = { + .name = "physmap-flash", + .dev = { + .platform_data = &nor_flash_data, + }, + .num_resources = ARRAY_SIZE(nor_flash_resources), + .resource = nor_flash_resources, +}; + +/* USBHS */ +void usb_host_port_power(int port, int power) +{ + if (!power) /* only power-on supported for now */ + return; + + /* set VBOUT/PWEN and EXTLP0 in DVSTCTR */ + __raw_writew(__raw_readw(0xe6890008) | 0x600, 0xe6890008); +} + +static struct r8a66597_platdata usb_host_data = { + .on_chip = 1, + .port_power = usb_host_port_power, +}; + +static struct resource usb_host_resources[] = { + [0] = { + .name = "USBHS", + .start = 0xe6890000, + .end = 0xe68900e5, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 65, + .end = 65, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device usb_host_device = { + .name = "r8a66597_hcd", + .id = 0, + .dev = { + .platform_data = &usb_host_data, + .dma_mask = NULL, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(usb_host_resources), + .resource = usb_host_resources, +}; + +static struct platform_device *g4evm_devices[] __initdata = { + &nor_flash_device, + &usb_host_device, +}; + +static struct map_desc g4evm_io_desc[] __initdata = { + /* create a 1:1 entity map for 0xe6xxxxxx + * used by CPGA, INTC and PFC. + */ + { + .virtual = 0xe6000000, + .pfn = __phys_to_pfn(0xe6000000), + .length = 256 << 20, + .type = MT_DEVICE_NONSHARED + }, +}; + +static void __init g4evm_map_io(void) +{ + iotable_init(g4evm_io_desc, ARRAY_SIZE(g4evm_io_desc)); + + /* setup early devices, clocks and console here as well */ + sh7377_add_early_devices(); + sh7367_clock_init(); /* use g3 clocks for now */ + shmobile_setup_console(); +} + +static void __init g4evm_init(void) +{ + sh7377_pinmux_init(); + + /* Lit DS14 LED */ + gpio_request(GPIO_PORT109, NULL); + gpio_direction_output(GPIO_PORT109, 1); + gpio_export(GPIO_PORT109, 1); + + /* Lit DS15 LED */ + gpio_request(GPIO_PORT110, NULL); + gpio_direction_output(GPIO_PORT110, 1); + gpio_export(GPIO_PORT110, 1); + + /* Lit DS16 LED */ + gpio_request(GPIO_PORT112, NULL); + gpio_direction_output(GPIO_PORT112, 1); + gpio_export(GPIO_PORT112, 1); + + /* Lit DS17 LED */ + gpio_request(GPIO_PORT113, NULL); + gpio_direction_output(GPIO_PORT113, 1); + gpio_export(GPIO_PORT113, 1); + + /* USBHS */ + gpio_request(GPIO_FN_VBUS_0, NULL); + gpio_request(GPIO_FN_PWEN, NULL); + gpio_request(GPIO_FN_OVCN, NULL); + gpio_request(GPIO_FN_OVCN2, NULL); + gpio_request(GPIO_FN_EXTLP, NULL); + gpio_request(GPIO_FN_IDIN, NULL); + + /* enable clock in SMSTPCR3 */ + __raw_writel(__raw_readl(0xe615013c) & ~(1 << 22), 0xe615013c); + + /* setup USB phy */ + __raw_writew(0x0200, 0xe605810a); /* USBCR1 */ + __raw_writew(0x00e0, 0xe60581c0); /* CPFCH */ + __raw_writew(0x6010, 0xe60581c6); /* CGPOSR */ + __raw_writew(0x8a0a, 0xe605810c); /* USBCR2 */ + + sh7377_add_standard_devices(); + + platform_add_devices(g4evm_devices, ARRAY_SIZE(g4evm_devices)); +} + +MACHINE_START(G4EVM, "g4evm") + .phys_io = 0xe6000000, + .io_pg_offst = ((0xe6000000) >> 18) & 0xfffc, + .map_io = g4evm_map_io, + .init_irq = sh7377_init_irq, + .init_machine = g4evm_init, + .timer = &shmobile_timer, +MACHINE_END diff --git a/arch/arm/mach-shmobile/clock-sh7367.c b/arch/arm/mach-shmobile/clock-sh7367.c new file mode 100644 index 00000000000..58bd54e1113 --- /dev/null +++ b/arch/arm/mach-shmobile/clock-sh7367.c @@ -0,0 +1,96 @@ +/* + * Preliminary clock framework support for sh7367 + * + * Copyright (C) 2010 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/clk.h> + +struct clk { + const char *name; + unsigned long rate; +}; + +#include <asm/clkdev.h> + +int __clk_get(struct clk *clk) +{ + return 1; +} +EXPORT_SYMBOL(__clk_get); + +void __clk_put(struct clk *clk) +{ +} +EXPORT_SYMBOL(__clk_put); + + +int clk_enable(struct clk *clk) +{ + return 0; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + return clk ? clk->rate : 0; +} +EXPORT_SYMBOL(clk_get_rate); + +/* a static peripheral clock for now - enough to get sh-sci working */ +static struct clk peripheral_clk = { + .name = "peripheral_clk", + .rate = 48000000, +}; + +/* a static rclk for now - enough to get sh_cmt working */ +static struct clk r_clk = { + .name = "r_clk", + .rate = 32768, +}; + +/* a static usb0 for now - enough to get r8a66597 working */ +static struct clk usb0_clk = { + .name = "usb0", +}; + +static struct clk_lookup lookups[] = { + { + .clk = &peripheral_clk, + }, { + .clk = &r_clk, + }, { + .clk = &usb0_clk, + } +}; + +void __init sh7367_clock_init(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(lookups); i++) { + lookups[i].con_id = lookups[i].clk->name; + clkdev_add(&lookups[i]); + } +} diff --git a/arch/arm/mach-shmobile/console.c b/arch/arm/mach-shmobile/console.c new file mode 100644 index 00000000000..9411a5bf4fd --- /dev/null +++ b/arch/arm/mach-shmobile/console.c @@ -0,0 +1,31 @@ +/* + * SH-Mobile Console + * + * Copyright (C) 2010 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <mach/common.h> +#include <asm/mach/map.h> + +void __init shmobile_setup_console(void) +{ + parse_early_param(); + + /* Let earlyprintk output early console messages */ + early_platform_driver_probe("earlyprintk", 1, 1); +} diff --git a/arch/arm/mach-shmobile/include/mach/clkdev.h b/arch/arm/mach-shmobile/include/mach/clkdev.h new file mode 100644 index 00000000000..36d0163a857 --- /dev/null +++ b/arch/arm/mach-shmobile/include/mach/clkdev.h @@ -0,0 +1,7 @@ +#ifndef __ASM_MACH_CLKDEV_H +#define __ASM_MACH_CLKDEV_H + +int __clk_get(struct clk *clk); +void __clk_put(struct clk *clk); + +#endif /* __ASM_MACH_CLKDEV_H */ diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h new file mode 100644 index 00000000000..57903605cc5 --- /dev/null +++ b/arch/arm/mach-shmobile/include/mach/common.h @@ -0,0 +1,23 @@ +#ifndef __ARCH_MACH_COMMON_H +#define __ARCH_MACH_COMMON_H + +extern struct sys_timer shmobile_timer; +extern void shmobile_setup_console(void); + +extern void sh7367_init_irq(void); +extern void sh7367_add_early_devices(void); +extern void sh7367_add_standard_devices(void); +extern void sh7367_clock_init(void); +extern void sh7367_pinmux_init(void); + +extern void sh7377_init_irq(void); +extern void sh7377_add_early_devices(void); +extern void sh7377_add_standard_devices(void); +extern void sh7377_pinmux_init(void); + +extern void sh7372_init_irq(void); +extern void sh7372_add_early_devices(void); +extern void sh7372_add_standard_devices(void); +extern void sh7372_pinmux_init(void); + +#endif /* __ARCH_MACH_COMMON_H */ diff --git a/arch/arm/mach-shmobile/include/mach/dma.h b/arch/arm/mach-shmobile/include/mach/dma.h new file mode 100644 index 00000000000..40a8c178f10 --- /dev/null +++ b/arch/arm/mach-shmobile/include/mach/dma.h @@ -0,0 +1 @@ +/* empty */ diff --git a/arch/arm/mach-shmobile/include/mach/entry-macro.S b/arch/arm/mach-shmobile/include/mach/entry-macro.S new file mode 100644 index 00000000000..a285d13c741 --- /dev/null +++ b/arch/arm/mach-shmobile/include/mach/entry-macro.S @@ -0,0 +1,39 @@ +/* + * Copyright (C) 2008 Renesas Solutions Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <mach/hardware.h> +#include <mach/irqs.h> + + .macro disable_fiq + .endm + + .macro get_irqnr_preamble, base, tmp + ldr \base, =INTFLGA + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + ldr \irqnr, [\base] + cmp \irqnr, #0 + beq 1000f + /* intevt to irq number */ + lsr \irqnr, \irqnr, #0x5 + subs \irqnr, \irqnr, #16 + +1000: + .endm diff --git a/arch/arm/mach-shmobile/include/mach/gpio.h b/arch/arm/mach-shmobile/include/mach/gpio.h new file mode 100644 index 00000000000..5bc6bd444d7 --- /dev/null +++ b/arch/arm/mach-shmobile/include/mach/gpio.h @@ -0,0 +1,48 @@ +/* + * Generic GPIO API and pinmux table support + * + * Copyright (c) 2008 Magnus Damm + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_ARCH_GPIO_H +#define __ASM_ARCH_GPIO_H + +#include <linux/kernel.h> +#include <linux/errno.h> + +#define ARCH_NR_GPIOS 1024 +#include <linux/sh_pfc.h> + +#ifdef CONFIG_GPIOLIB + +static inline int gpio_get_value(unsigned gpio) +{ + return __gpio_get_value(gpio); +} + +static inline void gpio_set_value(unsigned gpio, int value) +{ + __gpio_set_value(gpio, value); +} + +static inline int gpio_cansleep(unsigned gpio) +{ + return __gpio_cansleep(gpio); +} + +static inline int gpio_to_irq(unsigned gpio) +{ + return -ENOSYS; +} + +static inline int irq_to_gpio(unsigned int irq) +{ + return -EINVAL; +} + +#endif /* CONFIG_GPIOLIB */ + +#endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-shmobile/include/mach/hardware.h b/arch/arm/mach-shmobile/include/mach/hardware.h new file mode 100644 index 00000000000..3f0ef194603 --- /dev/null +++ b/arch/arm/mach-shmobile/include/mach/hardware.h @@ -0,0 +1,7 @@ +#ifndef __ASM_MACH_HARDWARE_H +#define __ASM_MACH_HARDWARE_H + +/* INTFLGA register - used by low level interrupt code in entry-macro.S */ +#define INTFLGA 0xe6980018 + +#endif /* __ASM_MACH_HARDWARE_H */ diff --git a/arch/arm/mach-shmobile/include/mach/io.h b/arch/arm/mach-shmobile/include/mach/io.h new file mode 100644 index 00000000000..7339fe46cb7 --- /dev/null +++ b/arch/arm/mach-shmobile/include/mach/io.h @@ -0,0 +1,9 @@ +#ifndef __ASM_MACH_IO_H +#define __ASM_MACH_IO_H + +#define IO_SPACE_LIMIT 0xffffffff + +#define __io(a) ((void __iomem *)(a)) +#define __mem_pci(a) (a) + +#endif /* __ASM_MACH_IO_H */ diff --git a/arch/arm/mach-shmobile/include/mach/irqs.h b/arch/arm/mach-shmobile/include/mach/irqs.h new file mode 100644 index 00000000000..5179b72e1ee --- /dev/null +++ b/arch/arm/mach-shmobile/include/mach/irqs.h @@ -0,0 +1,10 @@ +#ifndef __ASM_MACH_IRQS_H +#define __ASM_MACH_IRQS_H + +#define NR_IRQS 512 +#define NR_IRQS_LEGACY 8 + +#define evt2irq(evt) (((evt) >> 5) - 16) +#define irq2evt(irq) (((irq) + 16) << 5) + +#endif /* __ASM_MACH_IRQS_H */ diff --git a/arch/arm/mach-shmobile/include/mach/memory.h b/arch/arm/mach-shmobile/include/mach/memory.h new file mode 100644 index 00000000000..e188183f4dc --- /dev/null +++ b/arch/arm/mach-shmobile/include/mach/memory.h @@ -0,0 +1,7 @@ +#ifndef __ASM_MACH_MEMORY_H +#define __ASM_MACH_MEMORY_H + +#define PHYS_OFFSET UL(CONFIG_MEMORY_START) +#define MEM_SIZE UL(CONFIG_MEMORY_SIZE) + +#endif /* __ASM_MACH_MEMORY_H */ diff --git a/arch/arm/mach-shmobile/include/mach/sh7367.h b/arch/arm/mach-shmobile/include/mach/sh7367.h new file mode 100644 index 00000000000..52d0de686f6 --- /dev/null +++ b/arch/arm/mach-shmobile/include/mach/sh7367.h @@ -0,0 +1,332 @@ +#ifndef __ASM_SH7367_H__ +#define __ASM_SH7367_H__ + +/* Pin Function Controller: + * GPIO_FN_xx - GPIO used to select pin function + * GPIO_PORTxx - GPIO mapped to real I/O pin on CPU + */ +enum { + /* 49-1 -> 49-6 (GPIO) */ + GPIO_PORT0, GPIO_PORT1, GPIO_PORT2, GPIO_PORT3, GPIO_PORT4, + GPIO_PORT5, GPIO_PORT6, GPIO_PORT7, GPIO_PORT8, GPIO_PORT9, + + GPIO_PORT10, GPIO_PORT11, GPIO_PORT12, GPIO_PORT13, GPIO_PORT14, + GPIO_PORT15, GPIO_PORT16, GPIO_PORT17, GPIO_PORT18, GPIO_PORT19, + + GPIO_PORT20, GPIO_PORT21, GPIO_PORT22, GPIO_PORT23, GPIO_PORT24, + GPIO_PORT25, GPIO_PORT26, GPIO_PORT27, GPIO_PORT28, GPIO_PORT29, + + GPIO_PORT30, GPIO_PORT31, GPIO_PORT32, GPIO_PORT33, GPIO_PORT34, + GPIO_PORT35, GPIO_PORT36, GPIO_PORT37, GPIO_PORT38, GPIO_PORT39, + + GPIO_PORT40, GPIO_PORT41, GPIO_PORT42, GPIO_PORT43, GPIO_PORT44, + GPIO_PORT45, GPIO_PORT46, GPIO_PORT47, GPIO_PORT48, GPIO_PORT49, + + GPIO_PORT50, GPIO_PORT51, GPIO_PORT52, GPIO_PORT53, GPIO_PORT54, + GPIO_PORT55, GPIO_PORT56, GPIO_PORT57, GPIO_PORT58, GPIO_PORT59, + + GPIO_PORT60, GPIO_PORT61, GPIO_PORT62, GPIO_PORT63, GPIO_PORT64, + GPIO_PORT65, GPIO_PORT66, GPIO_PORT67, GPIO_PORT68, GPIO_PORT69, + + GPIO_PORT70, GPIO_PORT71, GPIO_PORT72, GPIO_PORT73, GPIO_PORT74, + GPIO_PORT75, GPIO_PORT76, GPIO_PORT77, GPIO_PORT78, GPIO_PORT79, + + GPIO_PORT80, GPIO_PORT81, GPIO_PORT82, GPIO_PORT83, GPIO_PORT84, + GPIO_PORT85, GPIO_PORT86, GPIO_PORT87, GPIO_PORT88, GPIO_PORT89, + + GPIO_PORT90, GPIO_PORT91, GPIO_PORT92, GPIO_PORT93, GPIO_PORT94, + GPIO_PORT95, GPIO_PORT96, GPIO_PORT97, GPIO_PORT98, GPIO_PORT99, + + GPIO_PORT100, GPIO_PORT101, GPIO_PORT102, GPIO_PORT103, GPIO_PORT104, + GPIO_PORT105, GPIO_PORT106, GPIO_PORT107, GPIO_PORT108, GPIO_PORT109, + + GPIO_PORT110, GPIO_PORT111, GPIO_PORT112, GPIO_PORT113, GPIO_PORT114, + GPIO_PORT115, GPIO_PORT116, GPIO_PORT117, GPIO_PORT118, GPIO_PORT119, + + GPIO_PORT120, GPIO_PORT121, GPIO_PORT122, GPIO_PORT123, GPIO_PORT124, + GPIO_PORT125, GPIO_PORT126, GPIO_PORT127, GPIO_PORT128, GPIO_PORT129, + + GPIO_PORT130, GPIO_PORT131, GPIO_PORT132, GPIO_PORT133, GPIO_PORT134, + GPIO_PORT135, GPIO_PORT136, GPIO_PORT137, GPIO_PORT138, GPIO_PORT139, + + GPIO_PORT140, GPIO_PORT141, GPIO_PORT142, GPIO_PORT143, GPIO_PORT144, + GPIO_PORT145, GPIO_PORT146, GPIO_PORT147, GPIO_PORT148, GPIO_PORT149, + + GPIO_PORT150, GPIO_PORT151, GPIO_PORT152, GPIO_PORT153, GPIO_PORT154, + GPIO_PORT155, GPIO_PORT156, GPIO_PORT157, GPIO_PORT158, GPIO_PORT159, + + GPIO_PORT160, GPIO_PORT161, GPIO_PORT162, GPIO_PORT163, GPIO_PORT164, + GPIO_PORT165, GPIO_PORT166, GPIO_PORT167, GPIO_PORT168, GPIO_PORT169, + + GPIO_PORT170, GPIO_PORT171, GPIO_PORT172, GPIO_PORT173, GPIO_PORT174, + GPIO_PORT175, GPIO_PORT176, GPIO_PORT177, GPIO_PORT178, GPIO_PORT179, + + GPIO_PORT180, GPIO_PORT181, GPIO_PORT182, GPIO_PORT183, GPIO_PORT184, + GPIO_PORT185, GPIO_PORT186, GPIO_PORT187, GPIO_PORT188, GPIO_PORT189, + + GPIO_PORT190, GPIO_PORT191, GPIO_PORT192, GPIO_PORT193, GPIO_PORT194, + GPIO_PORT195, GPIO_PORT196, GPIO_PORT197, GPIO_PORT198, GPIO_PORT199, + + GPIO_PORT200, GPIO_PORT201, GPIO_PORT202, GPIO_PORT203, GPIO_PORT204, + GPIO_PORT205, GPIO_PORT206, GPIO_PORT207, GPIO_PORT208, GPIO_PORT209, + + GPIO_PORT210, GPIO_PORT211, GPIO_PORT212, GPIO_PORT213, GPIO_PORT214, + GPIO_PORT215, GPIO_PORT216, GPIO_PORT217, GPIO_PORT218, GPIO_PORT219, + + GPIO_PORT220, GPIO_PORT221, GPIO_PORT222, GPIO_PORT223, GPIO_PORT224, + GPIO_PORT225, GPIO_PORT226, GPIO_PORT227, GPIO_PORT228, GPIO_PORT229, + + GPIO_PORT230, GPIO_PORT231, GPIO_PORT232, GPIO_PORT233, GPIO_PORT234, + GPIO_PORT235, GPIO_PORT236, GPIO_PORT237, GPIO_PORT238, GPIO_PORT239, + + GPIO_PORT240, GPIO_PORT241, GPIO_PORT242, GPIO_PORT243, GPIO_PORT244, + GPIO_PORT245, GPIO_PORT246, GPIO_PORT247, GPIO_PORT248, GPIO_PORT249, + + GPIO_PORT250, GPIO_PORT251, GPIO_PORT252, GPIO_PORT253, GPIO_PORT254, + GPIO_PORT255, GPIO_PORT256, GPIO_PORT257, GPIO_PORT258, GPIO_PORT259, + + GPIO_PORT260, GPIO_PORT261, GPIO_PORT262, GPIO_PORT263, GPIO_PORT264, + GPIO_PORT265, GPIO_PORT266, GPIO_PORT267, GPIO_PORT268, GPIO_PORT269, + + GPIO_PORT270, GPIO_PORT271, GPIO_PORT272, + + /* Special Pull-up / Pull-down Functions */ + GPIO_FN_PORT48_KEYIN0_PU, GPIO_FN_PORT49_KEYIN1_PU, + GPIO_FN_PORT50_KEYIN2_PU, GPIO_FN_PORT55_KEYIN3_PU, + GPIO_FN_PORT56_KEYIN4_PU, GPIO_FN_PORT57_KEYIN5_PU, + GPIO_FN_PORT58_KEYIN6_PU, + + /* 49-1 (FN) */ + GPIO_FN_VBUS0, GPIO_FN_CPORT0, GPIO_FN_CPORT1, GPIO_FN_CPORT2, + GPIO_FN_CPORT3, GPIO_FN_CPORT4, GPIO_FN_CPORT5, GPIO_FN_CPORT6, + GPIO_FN_CPORT7, GPIO_FN_CPORT8, GPIO_FN_CPORT9, GPIO_FN_CPORT10, + GPIO_FN_CPORT11, GPIO_FN_SIN2, GPIO_FN_CPORT12, GPIO_FN_XCTS2, + GPIO_FN_CPORT13, GPIO_FN_RFSPO4, GPIO_FN_CPORT14, GPIO_FN_RFSPO5, + GPIO_FN_CPORT15, GPIO_FN_CPORT16, GPIO_FN_CPORT17, GPIO_FN_SOUT2, + GPIO_FN_CPORT18, GPIO_FN_XRTS2, GPIO_FN_CPORT19, GPIO_FN_CPORT20, + GPIO_FN_RFSPO6, GPIO_FN_CPORT21, GPIO_FN_STATUS0, GPIO_FN_CPORT22, + GPIO_FN_STATUS1, GPIO_FN_CPORT23, GPIO_FN_STATUS2, GPIO_FN_RFSPO7, + GPIO_FN_MPORT0, GPIO_FN_MPORT1, GPIO_FN_B_SYNLD1, GPIO_FN_B_SYNLD2, + GPIO_FN_XMAINPS, GPIO_FN_XDIVPS, GPIO_FN_XIDRST, GPIO_FN_IDCLK, + GPIO_FN_IDIO, GPIO_FN_SOUT1, GPIO_FN_SCIFA4_TXD, + GPIO_FN_M02_BERDAT, GPIO_FN_SIN1, GPIO_FN_SCIFA4_RXD, GPIO_FN_XWUP, + GPIO_FN_XRTS1, GPIO_FN_SCIFA4_RTS, GPIO_FN_M03_BERCLK, + GPIO_FN_XCTS1, GPIO_FN_SCIFA4_CTS, + + /* 49-2 (FN) */ + GPIO_FN_HSU_IQ_AGC6, GPIO_FN_MFG2_IN2, GPIO_FN_MSIOF2_MCK0, + GPIO_FN_HSU_IQ_AGC5, GPIO_FN_MFG2_IN1, GPIO_FN_MSIOF2_MCK1, + GPIO_FN_HSU_IQ_AGC4, GPIO_FN_MSIOF2_RSYNC, + GPIO_FN_HSU_IQ_AGC3, GPIO_FN_MFG2_OUT1, GPIO_FN_MSIOF2_RSCK, + GPIO_FN_HSU_IQ_AGC2, GPIO_FN_PORT42_KEYOUT0, + GPIO_FN_HSU_IQ_AGC1, GPIO_FN_PORT43_KEYOUT1, + GPIO_FN_HSU_IQ_AGC0, GPIO_FN_PORT44_KEYOUT2, + GPIO_FN_HSU_IQ_AGC_ST, GPIO_FN_PORT45_KEYOUT3, + GPIO_FN_HSU_IQ_PDO, GPIO_FN_PORT46_KEYOUT4, + GPIO_FN_HSU_IQ_PYO, GPIO_FN_PORT47_KEYOUT5, + GPIO_FN_HSU_EN_TXMUX_G3MO, GPIO_FN_PORT48_KEYIN0, + GPIO_FN_HSU_I_TXMUX_G3MO, GPIO_FN_PORT49_KEYIN1, + GPIO_FN_HSU_Q_TXMUX_G3MO, GPIO_FN_PORT50_KEYIN2, + GPIO_FN_HSU_SYO, GPIO_FN_PORT51_MSIOF2_TSYNC, + GPIO_FN_HSU_SDO, GPIO_FN_PORT52_MSIOF2_TSCK, + GPIO_FN_HSU_TGTTI_G3MO, GPIO_FN_PORT53_MSIOF2_TXD, + GPIO_FN_B_TIME_STAMP, GPIO_FN_PORT54_MSIOF2_RXD, + GPIO_FN_HSU_SDI, GPIO_FN_PORT55_KEYIN3, + GPIO_FN_HSU_SCO, GPIO_FN_PORT56_KEYIN4, + GPIO_FN_HSU_DREQ, GPIO_FN_PORT57_KEYIN5, + GPIO_FN_HSU_DACK, GPIO_FN_PORT58_KEYIN6, + GPIO_FN_HSU_CLK61M, GPIO_FN_PORT59_MSIOF2_SS1, + GPIO_FN_HSU_XRST, GPIO_FN_PORT60_MSIOF2_SS2, + GPIO_FN_PCMCLKO, GPIO_FN_SYNC8KO, GPIO_FN_DNPCM_A, GPIO_FN_UPPCM_A, + GPIO_FN_XTALB1L, + GPIO_FN_GPS_AGC1, GPIO_FN_SCIFA0_RTS, + GPIO_FN_GPS_AGC2, GPIO_FN_SCIFA0_SCK, + GPIO_FN_GPS_AGC3, GPIO_FN_SCIFA0_TXD, + GPIO_FN_GPS_AGC4, GPIO_FN_SCIFA0_RXD, + GPIO_FN_GPS_PWRD, GPIO_FN_SCIFA0_CTS, + GPIO_FN_GPS_IM, GPIO_FN_GPS_IS, GPIO_FN_GPS_QM, GPIO_FN_GPS_QS, + GPIO_FN_SIUBOMC, GPIO_FN_TPU2TO0, + GPIO_FN_SIUCKB, GPIO_FN_TPU2TO1, + GPIO_FN_SIUBOLR, GPIO_FN_BBIF2_TSYNC, GPIO_FN_TPU2TO2, + GPIO_FN_SIUBOBT, GPIO_FN_BBIF2_TSCK, GPIO_FN_TPU2TO3, + GPIO_FN_SIUBOSLD, GPIO_FN_BBIF2_TXD, GPIO_FN_TPU3TO0, + GPIO_FN_SIUBILR, GPIO_FN_TPU3TO1, + GPIO_FN_SIUBIBT, GPIO_FN_TPU3TO2, + GPIO_FN_SIUBISLD, GPIO_FN_TPU3TO3, + GPIO_FN_NMI, GPIO_FN_TPU4TO0, + GPIO_FN_DNPCM_M, GPIO_FN_TPU4TO1, GPIO_FN_TPU4TO2, GPIO_FN_TPU4TO3, + GPIO_FN_IRQ_TMPB, + GPIO_FN_PWEN, GPIO_FN_MFG1_OUT1, + GPIO_FN_OVCN, GPIO_FN_MFG1_IN1, + GPIO_FN_OVCN2, GPIO_FN_MFG1_IN2, + + /* 49-3 (FN) */ + GPIO_FN_RFSPO1, GPIO_FN_RFSPO2, GPIO_FN_RFSPO3, GPIO_FN_PORT93_VIO_CKO2, + GPIO_FN_USBTERM, GPIO_FN_EXTLP, GPIO_FN_IDIN, + GPIO_FN_SCIFA5_CTS, GPIO_FN_MFG0_IN1, + GPIO_FN_SCIFA5_RTS, GPIO_FN_MFG0_IN2, + GPIO_FN_SCIFA5_RXD, + GPIO_FN_SCIFA5_TXD, + GPIO_FN_SCIFA5_SCK, GPIO_FN_MFG0_OUT1, + GPIO_FN_A0_EA0, GPIO_FN_BS, + GPIO_FN_A14_EA14, GPIO_FN_PORT102_KEYOUT0, + GPIO_FN_A15_EA15, GPIO_FN_PORT103_KEYOUT1, GPIO_FN_DV_CLKOL, + GPIO_FN_A16_EA16, GPIO_FN_PORT104_KEYOUT2, + GPIO_FN_DV_VSYNCL, GPIO_FN_MSIOF0_SS1, + GPIO_FN_A17_EA17, GPIO_FN_PORT105_KEYOUT3, + GPIO_FN_DV_HSYNCL, GPIO_FN_MSIOF0_TSYNC, + GPIO_FN_A18_EA18, GPIO_FN_PORT106_KEYOUT4, + GPIO_FN_DV_DL0, GPIO_FN_MSIOF0_TSCK, + GPIO_FN_A19_EA19, GPIO_FN_PORT107_KEYOUT5, + GPIO_FN_DV_DL1, GPIO_FN_MSIOF0_TXD, + GPIO_FN_A20_EA20, GPIO_FN_PORT108_KEYIN0, + GPIO_FN_DV_DL2, GPIO_FN_MSIOF0_RSCK, + GPIO_FN_A21_EA21, GPIO_FN_PORT109_KEYIN1, + GPIO_FN_DV_DL3, GPIO_FN_MSIOF0_RSYNC, + GPIO_FN_A22_EA22, GPIO_FN_PORT110_KEYIN2, + GPIO_FN_DV_DL4, GPIO_FN_MSIOF0_MCK0, + GPIO_FN_A23_EA23, GPIO_FN_PORT111_KEYIN3, + GPIO_FN_DV_DL5, GPIO_FN_MSIOF0_MCK1, + GPIO_FN_A24_EA24, GPIO_FN_PORT112_KEYIN4, + GPIO_FN_DV_DL6, GPIO_FN_MSIOF0_RXD, + GPIO_FN_A25_EA25, GPIO_FN_PORT113_KEYIN5, + GPIO_FN_DV_DL7, GPIO_FN_MSIOF0_SS2, + GPIO_FN_A26, GPIO_FN_PORT113_KEYIN6, GPIO_FN_DV_CLKIL, + GPIO_FN_D0_ED0_NAF0, GPIO_FN_D1_ED1_NAF1, GPIO_FN_D2_ED2_NAF2, + GPIO_FN_D3_ED3_NAF3, GPIO_FN_D4_ED4_NAF4, GPIO_FN_D5_ED5_NAF5, + GPIO_FN_D6_ED6_NAF6, GPIO_FN_D7_ED7_NAF7, GPIO_FN_D8_ED8_NAF8, + GPIO_FN_D9_ED9_NAF9, GPIO_FN_D10_ED10_NAF10, GPIO_FN_D11_ED11_NAF11, + GPIO_FN_D12_ED12_NAF12, GPIO_FN_D13_ED13_NAF13, + GPIO_FN_D14_ED14_NAF14, GPIO_FN_D15_ED15_NAF15, + GPIO_FN_CS4, GPIO_FN_CS5A, GPIO_FN_CS5B, GPIO_FN_FCE1, + GPIO_FN_CS6B, GPIO_FN_XCS2, GPIO_FN_FCE0, GPIO_FN_CS6A, + GPIO_FN_DACK0, GPIO_FN_WAIT, GPIO_FN_DREQ0, GPIO_FN_RD_XRD, + GPIO_FN_A27, GPIO_FN_RDWR_XWE, GPIO_FN_WE0_XWR0_FWE, + GPIO_FN_WE1_XWR1, GPIO_FN_FRB, GPIO_FN_CKO, + GPIO_FN_NBRSTOUT, GPIO_FN_NBRST, + + /* 49-4 (FN) */ + GPIO_FN_RFSPO0, GPIO_FN_PORT146_VIO_CKO2, GPIO_FN_TSTMD, + GPIO_FN_VIO_VD, GPIO_FN_VIO_HD, + GPIO_FN_VIO_D0, GPIO_FN_VIO_D1, GPIO_FN_VIO_D2, + GPIO_FN_VIO_D3, GPIO_FN_VIO_D4, GPIO_FN_VIO_D5, + GPIO_FN_VIO_D6, GPIO_FN_VIO_D7, GPIO_FN_VIO_D8, + GPIO_FN_VIO_D9, GPIO_FN_VIO_D10, GPIO_FN_VIO_D11, + GPIO_FN_VIO_D12, GPIO_FN_VIO_D13, GPIO_FN_VIO_D14, + GPIO_FN_VIO_D15, GPIO_FN_VIO_CLK, GPIO_FN_VIO_FIELD, + GPIO_FN_VIO_CKO, + GPIO_FN_MFG3_IN1, GPIO_FN_MFG3_IN2, + GPIO_FN_M9_SLCD_A01, GPIO_FN_MFG3_OUT1, GPIO_FN_TPU0TO0, + GPIO_FN_M10_SLCD_CK1, GPIO_FN_MFG4_IN1, GPIO_FN_TPU0TO1, + GPIO_FN_M11_SLCD_SO1, GPIO_FN_MFG4_IN2, GPIO_FN_TPU0TO2, + GPIO_FN_M12_SLCD_CE1, GPIO_FN_MFG4_OUT1, GPIO_FN_TPU0TO3, + GPIO_FN_LCDD0, GPIO_FN_PORT175_KEYOUT0, GPIO_FN_DV_D0, + GPIO_FN_SIUCKA, GPIO_FN_MFG0_OUT2, + GPIO_FN_LCDD1, GPIO_FN_PORT176_KEYOUT1, GPIO_FN_DV_D1, + GPIO_FN_SIUAOLR, GPIO_FN_BBIF2_TSYNC1, + GPIO_FN_LCDD2, GPIO_FN_PORT177_KEYOUT2, GPIO_FN_DV_D2, + GPIO_FN_SIUAOBT, GPIO_FN_BBIF2_TSCK1, + GPIO_FN_LCDD3, GPIO_FN_PORT178_KEYOUT3, GPIO_FN_DV_D3, + GPIO_FN_SIUAOSLD, GPIO_FN_BBIF2_TXD1, + GPIO_FN_LCDD4, GPIO_FN_PORT179_KEYOUT4, GPIO_FN_DV_D4, + GPIO_FN_SIUAISPD, GPIO_FN_MFG1_OUT2, + GPIO_FN_LCDD5, GPIO_FN_PORT180_KEYOUT5, GPIO_FN_DV_D5, + GPIO_FN_SIUAILR, GPIO_FN_MFG2_OUT2, + GPIO_FN_LCDD6, GPIO_FN_DV_D6, + GPIO_FN_SIUAIBT, GPIO_FN_MFG3_OUT2, GPIO_FN_XWR2, + GPIO_FN_LCDD7, GPIO_FN_DV_D7, + GPIO_FN_SIUAISLD, GPIO_FN_MFG4_OUT2, GPIO_FN_XWR3, + GPIO_FN_LCDD8, GPIO_FN_DV_D8, GPIO_FN_D16, GPIO_FN_ED16, + GPIO_FN_LCDD9, GPIO_FN_DV_D9, GPIO_FN_D17, GPIO_FN_ED17, + GPIO_FN_LCDD10, GPIO_FN_DV_D10, GPIO_FN_D18, GPIO_FN_ED18, + GPIO_FN_LCDD11, GPIO_FN_DV_D11, GPIO_FN_D19, GPIO_FN_ED19, + GPIO_FN_LCDD12, GPIO_FN_DV_D12, GPIO_FN_D20, GPIO_FN_ED20, + GPIO_FN_LCDD13, GPIO_FN_DV_D13, GPIO_FN_D21, GPIO_FN_ED21, + GPIO_FN_LCDD14, GPIO_FN_DV_D14, GPIO_FN_D22, GPIO_FN_ED22, + GPIO_FN_LCDD15, GPIO_FN_DV_D15, GPIO_FN_D23, GPIO_FN_ED23, + GPIO_FN_LCDD16, GPIO_FN_DV_HSYNC, GPIO_FN_D24, GPIO_FN_ED24, + GPIO_FN_LCDD17, GPIO_FN_DV_VSYNC, GPIO_FN_D25, GPIO_FN_ED25, + GPIO_FN_LCDD18, GPIO_FN_DREQ2, GPIO_FN_MSIOF0L_TSCK, + GPIO_FN_D26, GPIO_FN_ED26, + GPIO_FN_LCDD19, GPIO_FN_MSIOF0L_TSYNC, + GPIO_FN_D27, GPIO_FN_ED27, + GPIO_FN_LCDD20, GPIO_FN_TS_SPSYNC1, GPIO_FN_MSIOF0L_MCK0, + GPIO_FN_D28, GPIO_FN_ED28, + GPIO_FN_LCDD21, GPIO_FN_TS_SDAT1, GPIO_FN_MSIOF0L_MCK1, + GPIO_FN_D29, GPIO_FN_ED29, + GPIO_FN_LCDD22, GPIO_FN_TS_SDEN1, GPIO_FN_MSIOF0L_SS1, + GPIO_FN_D30, GPIO_FN_ED30, + GPIO_FN_LCDD23, GPIO_FN_TS_SCK1, GPIO_FN_MSIOF0L_SS2, + GPIO_FN_D31, GPIO_FN_ED31, + GPIO_FN_LCDDCK, GPIO_FN_LCDWR, GPIO_FN_DV_CKO, GPIO_FN_SIUAOSPD, + GPIO_FN_LCDRD, GPIO_FN_DACK2, GPIO_FN_MSIOF0L_RSYNC, + + + /* 49-5 (FN) */ + GPIO_FN_LCDHSYN, GPIO_FN_LCDCS, GPIO_FN_LCDCS2, GPIO_FN_DACK3, + GPIO_FN_LCDDISP, GPIO_FN_LCDRS, GPIO_FN_DREQ3, GPIO_FN_MSIOF0L_RSCK, + GPIO_FN_LCDCSYN, GPIO_FN_LCDCSYN2, GPIO_FN_DV_CKI, + GPIO_FN_LCDLCLK, GPIO_FN_DREQ1, GPIO_FN_MSIOF0L_RXD, + GPIO_FN_LCDDON, GPIO_FN_LCDDON2, GPIO_FN_DACK1, GPIO_FN_MSIOF0L_TXD, + GPIO_FN_VIO_DR0, GPIO_FN_VIO_DR1, GPIO_FN_VIO_DR2, GPIO_FN_VIO_DR3, + GPIO_FN_VIO_DR4, GPIO_FN_VIO_DR5, GPIO_FN_VIO_DR6, GPIO_FN_VIO_DR7, + GPIO_FN_VIO_VDR, GPIO_FN_VIO_HDR, + GPIO_FN_VIO_CLKR, GPIO_FN_VIO_CKOR, + GPIO_FN_SCIFA1_TXD, GPIO_FN_GPS_PGFA0, + GPIO_FN_SCIFA1_SCK, GPIO_FN_GPS_PGFA1, + GPIO_FN_SCIFA1_RTS, GPIO_FN_GPS_EPPSINMON, + GPIO_FN_SCIFA1_RXD, GPIO_FN_SCIFA1_CTS, + GPIO_FN_MSIOF1_TXD, GPIO_FN_SCIFA1_TXD2, GPIO_FN_GPS_TXD, + GPIO_FN_MSIOF1_TSYNC, GPIO_FN_SCIFA1_CTS2, GPIO_FN_I2C_SDA2, + GPIO_FN_MSIOF1_TSCK, GPIO_FN_SCIFA1_SCK2, + GPIO_FN_MSIOF1_RXD, GPIO_FN_SCIFA1_RXD2, GPIO_FN_GPS_RXD, + GPIO_FN_MSIOF1_RSCK, GPIO_FN_SCIFA1_RTS2, + GPIO_FN_MSIOF1_RSYNC, GPIO_FN_I2C_SCL2, + GPIO_FN_MSIOF1_MCK0, GPIO_FN_MSIOF1_MCK1, + GPIO_FN_MSIOF1_SS1, GPIO_FN_EDBGREQ3, + GPIO_FN_MSIOF1_SS2, + GPIO_FN_PORT236_IROUT, GPIO_FN_IRDA_OUT, + GPIO_FN_IRDA_IN, GPIO_FN_IRDA_FIRSEL, + GPIO_FN_TPU1TO0, GPIO_FN_TS_SPSYNC3, + GPIO_FN_TPU1TO1, GPIO_FN_TS_SDAT3, + GPIO_FN_TPU1TO2, GPIO_FN_TS_SDEN3, GPIO_FN_PORT241_MSIOF2_SS1, + GPIO_FN_TPU1TO3, GPIO_FN_PORT242_MSIOF2_TSCK, + GPIO_FN_M13_BSW, GPIO_FN_PORT243_MSIOF2_TSYNC, + GPIO_FN_M14_GSW, GPIO_FN_PORT244_MSIOF2_TXD, + GPIO_FN_PORT245_IROUT, GPIO_FN_M15_RSW, + GPIO_FN_SOUT3, GPIO_FN_SCIFA2_TXD1, + GPIO_FN_SIN3, GPIO_FN_SCIFA2_RXD1, + GPIO_FN_XRTS3, GPIO_FN_SCIFA2_RTS1, GPIO_FN_PORT248_MSIOF2_SS2, + GPIO_FN_XCTS3, GPIO_FN_SCIFA2_CTS1, GPIO_FN_PORT249_MSIOF2_RXD, + GPIO_FN_DINT, GPIO_FN_SCIFA2_SCK1, GPIO_FN_TS_SCK3, + GPIO_FN_SDHICLK0, GPIO_FN_TCK2, + GPIO_FN_SDHICD0, + GPIO_FN_SDHID0_0, GPIO_FN_TMS2, + GPIO_FN_SDHID0_1, GPIO_FN_TDO2, + GPIO_FN_SDHID0_2, GPIO_FN_TDI2, + GPIO_FN_SDHID0_3, GPIO_FN_RTCK2, + + /* 49-6 (FN) */ + GPIO_FN_SDHICMD0, GPIO_FN_TRST2, + GPIO_FN_SDHIWP0, GPIO_FN_EDBGREQ2, + GPIO_FN_SDHICLK1, GPIO_FN_TCK3, + GPIO_FN_SDHID1_0, GPIO_FN_M11_SLCD_SO2, + GPIO_FN_TS_SPSYNC2, GPIO_FN_TMS3, + GPIO_FN_SDHID1_1, GPIO_FN_M9_SLCD_AO2, + GPIO_FN_TS_SDAT2, GPIO_FN_TDO3, + GPIO_FN_SDHID1_2, GPIO_FN_M10_SLCD_CK2, + GPIO_FN_TS_SDEN2, GPIO_FN_TDI3, + GPIO_FN_SDHID1_3, GPIO_FN_M12_SLCD_CE2, + GPIO_FN_TS_SCK2, GPIO_FN_RTCK3, + GPIO_FN_SDHICMD1, GPIO_FN_TRST3, + GPIO_FN_SDHICLK2, GPIO_FN_SCIFB_SCK, + GPIO_FN_SDHID2_0, GPIO_FN_SCIFB_TXD, + GPIO_FN_SDHID2_1, GPIO_FN_SCIFB_CTS, + GPIO_FN_SDHID2_2, GPIO_FN_SCIFB_RXD, + GPIO_FN_SDHID2_3, GPIO_FN_SCIFB_RTS, + GPIO_FN_SDHICMD2, + GPIO_FN_RESETOUTS, + GPIO_FN_DIVLOCK, +}; + +#endif /* __ASM_SH7367_H__ */ diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/include/mach/sh7372.h new file mode 100644 index 00000000000..dc34f00c56b --- /dev/null +++ b/arch/arm/mach-shmobile/include/mach/sh7372.h @@ -0,0 +1,434 @@ +/* + * Copyright (C) 2010 Renesas Solutions Corp. + * + * Kuninori Morimoto <morimoto.kuninori@renesas.com> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef __ASM_SH7372_H__ +#define __ASM_SH7372_H__ + +/* + * Pin Function Controller: + * GPIO_FN_xx - GPIO used to select pin function + * GPIO_PORTxx - GPIO mapped to real I/O pin on CPU + */ +enum { + /* PORT */ + GPIO_PORT0, GPIO_PORT1, GPIO_PORT2, GPIO_PORT3, GPIO_PORT4, + GPIO_PORT5, GPIO_PORT6, GPIO_PORT7, GPIO_PORT8, GPIO_PORT9, + + GPIO_PORT10, GPIO_PORT11, GPIO_PORT12, GPIO_PORT13, GPIO_PORT14, + GPIO_PORT15, GPIO_PORT16, GPIO_PORT17, GPIO_PORT18, GPIO_PORT19, + + GPIO_PORT20, GPIO_PORT21, GPIO_PORT22, GPIO_PORT23, GPIO_PORT24, + GPIO_PORT25, GPIO_PORT26, GPIO_PORT27, GPIO_PORT28, GPIO_PORT29, + + GPIO_PORT30, GPIO_PORT31, GPIO_PORT32, GPIO_PORT33, GPIO_PORT34, + GPIO_PORT35, GPIO_PORT36, GPIO_PORT37, GPIO_PORT38, GPIO_PORT39, + + GPIO_PORT40, GPIO_PORT41, GPIO_PORT42, GPIO_PORT43, GPIO_PORT44, + GPIO_PORT45, GPIO_PORT46, GPIO_PORT47, GPIO_PORT48, GPIO_PORT49, + + GPIO_PORT50, GPIO_PORT51, GPIO_PORT52, GPIO_PORT53, GPIO_PORT54, + GPIO_PORT55, GPIO_PORT56, GPIO_PORT57, GPIO_PORT58, GPIO_PORT59, + + GPIO_PORT60, GPIO_PORT61, GPIO_PORT62, GPIO_PORT63, GPIO_PORT64, + GPIO_PORT65, GPIO_PORT66, GPIO_PORT67, GPIO_PORT68, GPIO_PORT69, + + GPIO_PORT70, GPIO_PORT71, GPIO_PORT72, GPIO_PORT73, GPIO_PORT74, + GPIO_PORT75, GPIO_PORT76, GPIO_PORT77, GPIO_PORT78, GPIO_PORT79, + + GPIO_PORT80, GPIO_PORT81, GPIO_PORT82, GPIO_PORT83, GPIO_PORT84, + GPIO_PORT85, GPIO_PORT86, GPIO_PORT87, GPIO_PORT88, GPIO_PORT89, + + GPIO_PORT90, GPIO_PORT91, GPIO_PORT92, GPIO_PORT93, GPIO_PORT94, + GPIO_PORT95, GPIO_PORT96, GPIO_PORT97, GPIO_PORT98, GPIO_PORT99, + + GPIO_PORT100, GPIO_PORT101, GPIO_PORT102, GPIO_PORT103, GPIO_PORT104, + GPIO_PORT105, GPIO_PORT106, GPIO_PORT107, GPIO_PORT108, GPIO_PORT109, + + GPIO_PORT110, GPIO_PORT111, GPIO_PORT112, GPIO_PORT113, GPIO_PORT114, + GPIO_PORT115, GPIO_PORT116, GPIO_PORT117, GPIO_PORT118, GPIO_PORT119, + + GPIO_PORT120, GPIO_PORT121, GPIO_PORT122, GPIO_PORT123, GPIO_PORT124, + GPIO_PORT125, GPIO_PORT126, GPIO_PORT127, GPIO_PORT128, GPIO_PORT129, + + GPIO_PORT130, GPIO_PORT131, GPIO_PORT132, GPIO_PORT133, GPIO_PORT134, + GPIO_PORT135, GPIO_PORT136, GPIO_PORT137, GPIO_PORT138, GPIO_PORT139, + + GPIO_PORT140, GPIO_PORT141, GPIO_PORT142, GPIO_PORT143, GPIO_PORT144, + GPIO_PORT145, GPIO_PORT146, GPIO_PORT147, GPIO_PORT148, GPIO_PORT149, + + GPIO_PORT150, GPIO_PORT151, GPIO_PORT152, GPIO_PORT153, GPIO_PORT154, + GPIO_PORT155, GPIO_PORT156, GPIO_PORT157, GPIO_PORT158, GPIO_PORT159, + + GPIO_PORT160, GPIO_PORT161, GPIO_PORT162, GPIO_PORT163, GPIO_PORT164, + GPIO_PORT165, GPIO_PORT166, GPIO_PORT167, GPIO_PORT168, GPIO_PORT169, + + GPIO_PORT170, GPIO_PORT171, GPIO_PORT172, GPIO_PORT173, GPIO_PORT174, + GPIO_PORT175, GPIO_PORT176, GPIO_PORT177, GPIO_PORT178, GPIO_PORT179, + + GPIO_PORT180, GPIO_PORT181, GPIO_PORT182, GPIO_PORT183, GPIO_PORT184, + GPIO_PORT185, GPIO_PORT186, GPIO_PORT187, GPIO_PORT188, GPIO_PORT189, + + GPIO_PORT190, + + /* IRQ */ + GPIO_FN_IRQ0_6, /* PORT 6 */ + GPIO_FN_IRQ0_162, /* PORT 162 */ + GPIO_FN_IRQ1, /* PORT 12 */ + GPIO_FN_IRQ2_4, /* PORT 4 */ + GPIO_FN_IRQ2_5, /* PORT 5 */ + GPIO_FN_IRQ3_8, /* PORT 8 */ + GPIO_FN_IRQ3_16, /* PORT 16 */ + GPIO_FN_IRQ4_17, /* PORT 17 */ + GPIO_FN_IRQ4_163, /* PORT 163 */ + GPIO_FN_IRQ5, /* PORT 18 */ + GPIO_FN_IRQ6_39, /* PORT 39 */ + GPIO_FN_IRQ6_164, /* PORT 164 */ + GPIO_FN_IRQ7_40, /* PORT 40 */ + GPIO_FN_IRQ7_167, /* PORT 167 */ + GPIO_FN_IRQ8_41, /* PORT 41 */ + GPIO_FN_IRQ8_168, /* PORT 168 */ + GPIO_FN_IRQ9_42, /* PORT 42 */ + GPIO_FN_IRQ9_169, /* PORT 169 */ + GPIO_FN_IRQ10, /* PORT 65 */ + GPIO_FN_IRQ11, /* PORT 67 */ + GPIO_FN_IRQ12_80, /* PORT 80 */ + GPIO_FN_IRQ12_137, /* PORT 137 */ + GPIO_FN_IRQ13_81, /* PORT 81 */ + GPIO_FN_IRQ13_145, /* PORT 145 */ + GPIO_FN_IRQ14_82, /* PORT 82 */ + GPIO_FN_IRQ14_146, /* PORT 146 */ + GPIO_FN_IRQ15_83, /* PORT 83 */ + GPIO_FN_IRQ15_147, /* PORT 147 */ + GPIO_FN_IRQ16_84, /* PORT 84 */ + GPIO_FN_IRQ16_170, /* PORT 170 */ + GPIO_FN_IRQ17, /* PORT 85 */ + GPIO_FN_IRQ18, /* PORT 86 */ + GPIO_FN_IRQ19, /* PORT 87 */ + GPIO_FN_IRQ20, /* PORT 92 */ + GPIO_FN_IRQ21, /* PORT 93 */ + GPIO_FN_IRQ22, /* PORT 94 */ + GPIO_FN_IRQ23, /* PORT 95 */ + GPIO_FN_IRQ24, /* PORT 112 */ + GPIO_FN_IRQ25, /* PORT 119 */ + GPIO_FN_IRQ26_121, /* PORT 121 */ + GPIO_FN_IRQ26_172, /* PORT 172 */ + GPIO_FN_IRQ27_122, /* PORT 122 */ + GPIO_FN_IRQ27_180, /* PORT 180 */ + GPIO_FN_IRQ28_123, /* PORT 123 */ + GPIO_FN_IRQ28_181, /* PORT 181 */ + GPIO_FN_IRQ29_129, /* PORT 129 */ + GPIO_FN_IRQ29_182, /* PORT 182 */ + GPIO_FN_IRQ30_130, /* PORT 130 */ + GPIO_FN_IRQ30_183, /* PORT 183 */ + GPIO_FN_IRQ31_138, /* PORT 138 */ + GPIO_FN_IRQ31_184, /* PORT 184 */ + + /* + * MSIOF0 (PORT 36, 37, 38, 39 + * 40, 41, 42, 43, 44, 45) + */ + GPIO_FN_MSIOF0_TSYNC, GPIO_FN_MSIOF0_TSCK, + GPIO_FN_MSIOF0_RXD, GPIO_FN_MSIOF0_RSCK, + GPIO_FN_MSIOF0_RSYNC, GPIO_FN_MSIOF0_MCK0, + GPIO_FN_MSIOF0_MCK1, GPIO_FN_MSIOF0_SS1, + GPIO_FN_MSIOF0_SS2, GPIO_FN_MSIOF0_TXD, + + /* + * MSIOF1 (PORT 39, 40, 41, 42, 43, 44 + * 84, 85, 86, 87, 88, 89, 90, 91, 92, 93) + */ + GPIO_FN_MSIOF1_TSCK_39, GPIO_FN_MSIOF1_TSYNC_40, + GPIO_FN_MSIOF1_TSCK_88, GPIO_FN_MSIOF1_TSYNC_89, + GPIO_FN_MSIOF1_TXD_41, GPIO_FN_MSIOF1_RXD_42, + GPIO_FN_MSIOF1_TXD_90, GPIO_FN_MSIOF1_RXD_91, + GPIO_FN_MSIOF1_SS1_43, GPIO_FN_MSIOF1_SS2_44, + GPIO_FN_MSIOF1_SS1_92, GPIO_FN_MSIOF1_SS2_93, + GPIO_FN_MSIOF1_RSCK, GPIO_FN_MSIOF1_RSYNC, + GPIO_FN_MSIOF1_MCK0, GPIO_FN_MSIOF1_MCK1, + + /* + * MSIOF2 (PORT 134, 135, 136, 137, 138, 139 + * 148, 149, 150, 151) + */ + GPIO_FN_MSIOF2_RSCK, GPIO_FN_MSIOF2_RSYNC, + GPIO_FN_MSIOF2_MCK0, GPIO_FN_MSIOF2_MCK1, + GPIO_FN_MSIOF2_SS1, GPIO_FN_MSIOF2_SS2, + GPIO_FN_MSIOF2_TSYNC, GPIO_FN_MSIOF2_TSCK, + GPIO_FN_MSIOF2_RXD, GPIO_FN_MSIOF2_TXD, + + /* MSIOF3 (PORT 76, 77, 78, 79, 80, 81, 82, 83) */ + GPIO_FN_BBIF1_RXD, GPIO_FN_BBIF1_TSYNC, + GPIO_FN_BBIF1_TSCK, GPIO_FN_BBIF1_TXD, + GPIO_FN_BBIF1_RSCK, GPIO_FN_BBIF1_RSYNC, + GPIO_FN_BBIF1_FLOW, GPIO_FN_BB_RX_FLOW_N, + + /* MSIOF4 (PORT 0, 1, 2, 3) */ + GPIO_FN_BBIF2_TSCK1, GPIO_FN_BBIF2_TSYNC1, + GPIO_FN_BBIF2_TXD1, GPIO_FN_BBIF2_RXD, + + /* FSI (PORT 4, 5, 6, 7, 8, 9, 10, 11, 15) */ + GPIO_FN_FSIACK, GPIO_FN_FSIBCK, + GPIO_FN_FSIAILR, GPIO_FN_FSIAIBT, + GPIO_FN_FSIAISLD, GPIO_FN_FSIAOMC, + GPIO_FN_FSIAOLR, GPIO_FN_FSIAOBT, + GPIO_FN_FSIAOSLD, GPIO_FN_FSIASPDIF_11, + GPIO_FN_FSIASPDIF_15, + + /* FMSI (PORT 12, 13, 14, 15, 16, 17, 18, 65) */ + GPIO_FN_FMSOCK, GPIO_FN_FMSOOLR, + GPIO_FN_FMSIOLR, GPIO_FN_FMSOOBT, + GPIO_FN_FMSIOBT, GPIO_FN_FMSOSLD, + GPIO_FN_FMSOILR, GPIO_FN_FMSIILR, + GPIO_FN_FMSOIBT, GPIO_FN_FMSIIBT, + GPIO_FN_FMSISLD, GPIO_FN_FMSICK, + + /* SCIFA0 (PORT 152, 153, 156, 157, 158) */ + GPIO_FN_SCIFA0_TXD, GPIO_FN_SCIFA0_RXD, + GPIO_FN_SCIFA0_SCK, GPIO_FN_SCIFA0_RTS, + GPIO_FN_SCIFA0_CTS, + + /* SCIFA1 (PORT 154, 155, 159, 160, 161) */ + GPIO_FN_SCIFA1_TXD, GPIO_FN_SCIFA1_RXD, + GPIO_FN_SCIFA1_SCK, GPIO_FN_SCIFA1_RTS, + GPIO_FN_SCIFA1_CTS, + + /* SCIFA2 (PORT 94, 95, 96, 97, 98) */ + GPIO_FN_SCIFA2_CTS1, GPIO_FN_SCIFA2_RTS1, + GPIO_FN_SCIFA2_TXD1, GPIO_FN_SCIFA2_RXD1, + GPIO_FN_SCIFA2_SCK1, + + /* SCIFA3 (PORT 43, 44, + 140, 141, 142, 143, 144) */ + GPIO_FN_SCIFA3_CTS_43, GPIO_FN_SCIFA3_CTS_140, + GPIO_FN_SCIFA3_RTS_44, GPIO_FN_SCIFA3_RTS_141, + GPIO_FN_SCIFA3_SCK, GPIO_FN_SCIFA3_TXD, + GPIO_FN_SCIFA3_RXD, + + /* SCIFA4 (PORT 5, 6) */ + GPIO_FN_SCIFA4_RXD, GPIO_FN_SCIFA4_TXD, + + /* SCIFA5 (PORT 8, 12) */ + GPIO_FN_SCIFA5_RXD, GPIO_FN_SCIFA5_TXD, + + /* SCIFB (PORT 162, 163, 164, 165, 166) */ + GPIO_FN_SCIFB_SCK, GPIO_FN_SCIFB_RTS, + GPIO_FN_SCIFB_CTS, GPIO_FN_SCIFB_TXD, + GPIO_FN_SCIFB_RXD, + + /* + * CEU (PORT 16, 17, + * 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, + * 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, + * 120) + */ + GPIO_FN_VIO_HD, GPIO_FN_VIO_CKO1, GPIO_FN_VIO_CKO2, + GPIO_FN_VIO_VD, GPIO_FN_VIO_CLK, GPIO_FN_VIO_FIELD, + GPIO_FN_VIO_CKO, + GPIO_FN_VIO_D0, GPIO_FN_VIO_D1, GPIO_FN_VIO_D2, + GPIO_FN_VIO_D3, GPIO_FN_VIO_D4, GPIO_FN_VIO_D5, + GPIO_FN_VIO_D6, GPIO_FN_VIO_D7, GPIO_FN_VIO_D8, + GPIO_FN_VIO_D9, GPIO_FN_VIO_D10, GPIO_FN_VIO_D11, + GPIO_FN_VIO_D12, GPIO_FN_VIO_D13, GPIO_FN_VIO_D14, + GPIO_FN_VIO_D15, + + /* USB0 (PORT 113, 114, 115, 116, 117, 167) */ + GPIO_FN_IDIN_0, GPIO_FN_EXTLP_0, + GPIO_FN_OVCN2_0, GPIO_FN_PWEN_0, + GPIO_FN_OVCN_0, GPIO_FN_VBUS0_0, + + /* USB1 (PORT 18, 113, 114, 115, 116, 117, 138, 162, 168) */ + GPIO_FN_IDIN_1_18, GPIO_FN_IDIN_1_113, + GPIO_FN_PWEN_1_115, GPIO_FN_PWEN_1_138, + GPIO_FN_OVCN_1_114, GPIO_FN_OVCN_1_162, + GPIO_FN_EXTLP_1, GPIO_FN_OVCN2_1, + GPIO_FN_VBUS0_1, + + /* GPIO (PORT 41, 42, 43, 44) */ + GPIO_FN_GPI0, GPIO_FN_GPI1, GPIO_FN_GPO0, GPIO_FN_GPO1, + + /* + * BSC (PORT 19, + * 20, 21, 22, 25, 26, 27, 28, 29, + * 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, + * 40, 41, 42, 43, 44, 45, + * 62, 63, 64, 65, 66, 67, + * 71, 72, 74, 75) + */ + GPIO_FN_BS, GPIO_FN_WE1, + GPIO_FN_CKO, GPIO_FN_WAIT, GPIO_FN_RDWR, + + GPIO_FN_A0, GPIO_FN_A1, GPIO_FN_A2, GPIO_FN_A3, + GPIO_FN_A6, GPIO_FN_A7, GPIO_FN_A8, GPIO_FN_A9, + GPIO_FN_A10, GPIO_FN_A11, GPIO_FN_A12, GPIO_FN_A13, + GPIO_FN_A14, GPIO_FN_A15, GPIO_FN_A16, GPIO_FN_A17, + GPIO_FN_A18, GPIO_FN_A19, GPIO_FN_A20, GPIO_FN_A21, + GPIO_FN_A22, GPIO_FN_A23, GPIO_FN_A24, GPIO_FN_A25, + GPIO_FN_A26, + + GPIO_FN_CS0, GPIO_FN_CS2, GPIO_FN_CS4, + GPIO_FN_CS5A, GPIO_FN_CS5B, GPIO_FN_CS6A, + + /* + * BSC/FLCTL (PORT 23, 24, + * 46, 47, 48, 49, + * 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, + * 60, 61, 69, 70) + */ + GPIO_FN_RD_FSC, GPIO_FN_WE0_FWE, + GPIO_FN_A4_FOE, GPIO_FN_A5_FCDE, + GPIO_FN_D0_NAF0, GPIO_FN_D1_NAF1, GPIO_FN_D2_NAF2, + GPIO_FN_D3_NAF3, GPIO_FN_D4_NAF4, GPIO_FN_D5_NAF5, + GPIO_FN_D6_NAF6, GPIO_FN_D7_NAF7, GPIO_FN_D8_NAF8, + GPIO_FN_D9_NAF9, GPIO_FN_D10_NAF10, GPIO_FN_D11_NAF11, + GPIO_FN_D12_NAF12, GPIO_FN_D13_NAF13, GPIO_FN_D14_NAF14, + GPIO_FN_D15_NAF15, + + /* + * MMCIF(1) (PORT 84, 85, 86, 87, 88, 89, + * 90, 91, 92, 99) + */ + GPIO_FN_MMCD0_0, GPIO_FN_MMCD0_1, GPIO_FN_MMCD0_2, + GPIO_FN_MMCD0_3, GPIO_FN_MMCD0_4, GPIO_FN_MMCD0_5, + GPIO_FN_MMCD0_6, GPIO_FN_MMCD0_7, + GPIO_FN_MMCCMD0, GPIO_FN_MMCCLK0, + + /* MMCIF(2) (PORT 54, 55, 56, 57, 58, 59, 60, 61, 66, 67) */ + GPIO_FN_MMCD1_0, GPIO_FN_MMCD1_1, GPIO_FN_MMCD1_2, + GPIO_FN_MMCD1_3, GPIO_FN_MMCD1_4, GPIO_FN_MMCD1_5, + GPIO_FN_MMCD1_6, GPIO_FN_MMCD1_7, + GPIO_FN_MMCCLK1, GPIO_FN_MMCCMD1, + + /* SPU2 (PORT 65) */ + GPIO_FN_VINT_I, + + /* FLCTL (PORT 66, 68, 73) */ + GPIO_FN_FCE1, GPIO_FN_FCE0, GPIO_FN_FRB, + + /* HSI (PORT 76, 77, 78, 79, 80, 81, 82, 83) */ + GPIO_FN_GP_RX_FLAG, GPIO_FN_GP_RX_DATA, GPIO_FN_GP_TX_READY, + GPIO_FN_GP_RX_WAKE, GPIO_FN_MP_TX_FLAG, GPIO_FN_MP_TX_DATA, + GPIO_FN_MP_RX_READY, GPIO_FN_MP_TX_WAKE, + + /* + * MFI (PORT 76, 77, 78, 79, + * 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, + * 90, 91, 92, 93, 94, 95, 96, 97, 98, 99) + */ + GPIO_FN_MFIv6, /* see MSEL4CR 6 */ + GPIO_FN_MFIv4, /* see MSEL4CR 6 */ + + GPIO_FN_MEMC_CS0, GPIO_FN_MEMC_BUSCLK_MEMC_A0, + GPIO_FN_MEMC_CS1_MEMC_A1, GPIO_FN_MEMC_ADV_MEMC_DREQ0, + GPIO_FN_MEMC_WAIT_MEMC_DREQ1, GPIO_FN_MEMC_NOE, + GPIO_FN_MEMC_NWE, GPIO_FN_MEMC_INT, + + GPIO_FN_MEMC_AD0, GPIO_FN_MEMC_AD1, GPIO_FN_MEMC_AD2, + GPIO_FN_MEMC_AD3, GPIO_FN_MEMC_AD4, GPIO_FN_MEMC_AD5, + GPIO_FN_MEMC_AD6, GPIO_FN_MEMC_AD7, GPIO_FN_MEMC_AD8, + GPIO_FN_MEMC_AD9, GPIO_FN_MEMC_AD10, GPIO_FN_MEMC_AD11, + GPIO_FN_MEMC_AD12, GPIO_FN_MEMC_AD13, GPIO_FN_MEMC_AD14, + GPIO_FN_MEMC_AD15, + + /* SIM (PORT 94, 95, 98) */ + GPIO_FN_SIM_RST, GPIO_FN_SIM_CLK, GPIO_FN_SIM_D, + + /* TPU (PORT 93, 99, 112, 160, 161) */ + GPIO_FN_TPU0TO0, GPIO_FN_TPU0TO1, + GPIO_FN_TPU0TO2_93, GPIO_FN_TPU0TO2_99, + GPIO_FN_TPU0TO3, + + /* I2C2 (PORT 110, 111) */ + GPIO_FN_I2C_SCL2, GPIO_FN_I2C_SDA2, + + /* I2C3(1) (PORT 114, 115) */ + GPIO_FN_I2C_SCL3, GPIO_FN_I2C_SDA3, + + /* I2C3(2) (PORT 137, 145) */ + GPIO_FN_I2C_SCL3S, GPIO_FN_I2C_SDA3S, + + /* I2C4(2) (PORT 116, 117) */ + GPIO_FN_I2C_SCL4, GPIO_FN_I2C_SDA4, + + /* I2C4(2) (PORT 146, 147) */ + GPIO_FN_I2C_SCL4S, GPIO_FN_I2C_SDA4S, + + /* + * KEYSC (PORT 121, 122, 123, 124, 125, 126, 127, 128, 129, + * 130, 131, 132, 133, 134, 135, 136) + */ + GPIO_FN_KEYOUT0, GPIO_FN_KEYIN0_121, GPIO_FN_KEYIN0_136, + GPIO_FN_KEYOUT1, GPIO_FN_KEYIN1_122, GPIO_FN_KEYIN1_135, + GPIO_FN_KEYOUT2, GPIO_FN_KEYIN2_123, GPIO_FN_KEYIN2_134, + GPIO_FN_KEYOUT3, GPIO_FN_KEYIN3_124, GPIO_FN_KEYIN3_133, + GPIO_FN_KEYOUT4, GPIO_FN_KEYIN4, + GPIO_FN_KEYOUT5, GPIO_FN_KEYIN5, + GPIO_FN_KEYOUT6, GPIO_FN_KEYIN6, + GPIO_FN_KEYOUT7, GPIO_FN_KEYIN7, + + /* + * LCDC (PORT 121, 122, 123, 124, 125, 126, 127, 128, 129, + * 130, 131, 132, 133, 134, 135, 136, 137, 138, 139, + * 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, + * 150, 151) + */ + GPIO_FN_LCDC0_SELECT, /* LCDC 0 */ + GPIO_FN_LCDC1_SELECT, /* LCDC 1 */ + GPIO_FN_LCDHSYN, GPIO_FN_LCDCS, GPIO_FN_LCDVSYN, + GPIO_FN_LCDDCK, GPIO_FN_LCDWR, GPIO_FN_LCDRD, + GPIO_FN_LCDDISP, GPIO_FN_LCDRS, GPIO_FN_LCDLCLK, + GPIO_FN_LCDDON, + + GPIO_FN_LCDD0, GPIO_FN_LCDD1, GPIO_FN_LCDD2, GPIO_FN_LCDD3, + GPIO_FN_LCDD4, GPIO_FN_LCDD5, GPIO_FN_LCDD6, GPIO_FN_LCDD7, + GPIO_FN_LCDD8, GPIO_FN_LCDD9, GPIO_FN_LCDD10, GPIO_FN_LCDD11, + GPIO_FN_LCDD12, GPIO_FN_LCDD13, GPIO_FN_LCDD14, GPIO_FN_LCDD15, + GPIO_FN_LCDD16, GPIO_FN_LCDD17, GPIO_FN_LCDD18, GPIO_FN_LCDD19, + GPIO_FN_LCDD20, GPIO_FN_LCDD21, GPIO_FN_LCDD22, GPIO_FN_LCDD23, + + /* IRDA (PORT 139, 140, 141, 142) */ + GPIO_FN_IRDA_OUT, GPIO_FN_IRDA_IN, GPIO_FN_IRDA_FIRSEL, + GPIO_FN_IROUT_139, GPIO_FN_IROUT_140, + + /* TSIF1 (PORT 156, 157, 158, 159) */ + GPIO_FN_TS0_1SELECT, /* TSIF0 - 1 select */ + GPIO_FN_TS0_2SELECT, /* TSIF0 - 2 select */ + GPIO_FN_TS1_1SELECT, /* TSIF1 - 1 select */ + GPIO_FN_TS1_2SELECT, /* TSIF1 - 2 select */ + + GPIO_FN_TS_SPSYNC1, GPIO_FN_TS_SDAT1, + GPIO_FN_TS_SDEN1, GPIO_FN_TS_SCK1, + + /* TSIF2 (PORT 137, 145, 146, 147) */ + GPIO_FN_TS_SPSYNC2, GPIO_FN_TS_SDAT2, + GPIO_FN_TS_SDEN2, GPIO_FN_TS_SCK2, + + /* HDMI (PORT 169, 170) */ + GPIO_FN_HDMI_HPD, GPIO_FN_HDMI_CEC, + + /* SDHI0 (PORT 171, 172, 173, 174, 175, 176, 177, 178) */ + GPIO_FN_SDHICLK0, GPIO_FN_SDHICD0, + GPIO_FN_SDHICMD0, GPIO_FN_SDHIWP0, + GPIO_FN_SDHID0_0, GPIO_FN_SDHID0_1, + GPIO_FN_SDHID0_2, GPIO_FN_SDHID0_3, + + /* SDHI1 (PORT 179, 180, 181, 182, 183, 184) */ + GPIO_FN_SDHICLK1, GPIO_FN_SDHICMD1, GPIO_FN_SDHID1_0, + GPIO_FN_SDHID1_1, GPIO_FN_SDHID1_2, GPIO_FN_SDHID1_3, + + /* SDHI2 (PORT 185, 186, 187, 188, 189, 190) */ + GPIO_FN_SDHICLK2, GPIO_FN_SDHICMD2, GPIO_FN_SDHID2_0, + GPIO_FN_SDHID2_1, GPIO_FN_SDHID2_2, GPIO_FN_SDHID2_3, + + /* SDENC see MSEL4CR 19 */ + GPIO_FN_SDENC_CPG, + GPIO_FN_SDENC_DV_CLKI, +}; + +#endif /* __ASM_SH7372_H__ */ diff --git a/arch/arm/mach-shmobile/include/mach/sh7377.h b/arch/arm/mach-shmobile/include/mach/sh7377.h new file mode 100644 index 00000000000..f580e227dd1 --- /dev/null +++ b/arch/arm/mach-shmobile/include/mach/sh7377.h @@ -0,0 +1,360 @@ +#ifndef __ASM_SH7377_H__ +#define __ASM_SH7377_H__ + +/* Pin Function Controller: + * GPIO_FN_xx - GPIO used to select pin function + * GPIO_PORTxx - GPIO mapped to real I/O pin on CPU + */ +enum { + /* 55-1 -> 55-5 (GPIO) */ + GPIO_PORT0, GPIO_PORT1, GPIO_PORT2, GPIO_PORT3, GPIO_PORT4, + GPIO_PORT5, GPIO_PORT6, GPIO_PORT7, GPIO_PORT8, GPIO_PORT9, + + GPIO_PORT10, GPIO_PORT11, GPIO_PORT12, GPIO_PORT13, GPIO_PORT14, + GPIO_PORT15, GPIO_PORT16, GPIO_PORT17, GPIO_PORT18, GPIO_PORT19, + + GPIO_PORT20, GPIO_PORT21, GPIO_PORT22, GPIO_PORT23, GPIO_PORT24, + GPIO_PORT25, GPIO_PORT26, GPIO_PORT27, GPIO_PORT28, GPIO_PORT29, + + GPIO_PORT30, GPIO_PORT31, GPIO_PORT32, GPIO_PORT33, GPIO_PORT34, + GPIO_PORT35, GPIO_PORT36, GPIO_PORT37, GPIO_PORT38, GPIO_PORT39, + + GPIO_PORT40, GPIO_PORT41, GPIO_PORT42, GPIO_PORT43, GPIO_PORT44, + GPIO_PORT45, GPIO_PORT46, GPIO_PORT47, GPIO_PORT48, GPIO_PORT49, + + GPIO_PORT50, GPIO_PORT51, GPIO_PORT52, GPIO_PORT53, GPIO_PORT54, + GPIO_PORT55, GPIO_PORT56, GPIO_PORT57, GPIO_PORT58, GPIO_PORT59, + + GPIO_PORT60, GPIO_PORT61, GPIO_PORT62, GPIO_PORT63, GPIO_PORT64, + GPIO_PORT65, GPIO_PORT66, GPIO_PORT67, GPIO_PORT68, GPIO_PORT69, + + GPIO_PORT70, GPIO_PORT71, GPIO_PORT72, GPIO_PORT73, GPIO_PORT74, + GPIO_PORT75, GPIO_PORT76, GPIO_PORT77, GPIO_PORT78, GPIO_PORT79, + + GPIO_PORT80, GPIO_PORT81, GPIO_PORT82, GPIO_PORT83, GPIO_PORT84, + GPIO_PORT85, GPIO_PORT86, GPIO_PORT87, GPIO_PORT88, GPIO_PORT89, + + GPIO_PORT90, GPIO_PORT91, GPIO_PORT92, GPIO_PORT93, GPIO_PORT94, + GPIO_PORT95, GPIO_PORT96, GPIO_PORT97, GPIO_PORT98, GPIO_PORT99, + + GPIO_PORT100, GPIO_PORT101, GPIO_PORT102, GPIO_PORT103, GPIO_PORT104, + GPIO_PORT105, GPIO_PORT106, GPIO_PORT107, GPIO_PORT108, GPIO_PORT109, + + GPIO_PORT110, GPIO_PORT111, GPIO_PORT112, GPIO_PORT113, GPIO_PORT114, + GPIO_PORT115, GPIO_PORT116, GPIO_PORT117, GPIO_PORT118, + + GPIO_PORT128, GPIO_PORT129, + + GPIO_PORT130, GPIO_PORT131, GPIO_PORT132, GPIO_PORT133, GPIO_PORT134, + GPIO_PORT135, GPIO_PORT136, GPIO_PORT137, GPIO_PORT138, GPIO_PORT139, + + GPIO_PORT140, GPIO_PORT141, GPIO_PORT142, GPIO_PORT143, GPIO_PORT144, + GPIO_PORT145, GPIO_PORT146, GPIO_PORT147, GPIO_PORT148, GPIO_PORT149, + + GPIO_PORT150, GPIO_PORT151, GPIO_PORT152, GPIO_PORT153, GPIO_PORT154, + GPIO_PORT155, GPIO_PORT156, GPIO_PORT157, GPIO_PORT158, GPIO_PORT159, + + GPIO_PORT160, GPIO_PORT161, GPIO_PORT162, GPIO_PORT163, GPIO_PORT164, + + GPIO_PORT192, GPIO_PORT193, GPIO_PORT194, + GPIO_PORT195, GPIO_PORT196, GPIO_PORT197, GPIO_PORT198, GPIO_PORT199, + + GPIO_PORT200, GPIO_PORT201, GPIO_PORT202, GPIO_PORT203, GPIO_PORT204, + GPIO_PORT205, GPIO_PORT206, GPIO_PORT207, GPIO_PORT208, GPIO_PORT209, + + GPIO_PORT210, GPIO_PORT211, GPIO_PORT212, GPIO_PORT213, GPIO_PORT214, + GPIO_PORT215, GPIO_PORT216, GPIO_PORT217, GPIO_PORT218, GPIO_PORT219, + + GPIO_PORT220, GPIO_PORT221, GPIO_PORT222, GPIO_PORT223, GPIO_PORT224, + GPIO_PORT225, GPIO_PORT226, GPIO_PORT227, GPIO_PORT228, GPIO_PORT229, + + GPIO_PORT230, GPIO_PORT231, GPIO_PORT232, GPIO_PORT233, GPIO_PORT234, + GPIO_PORT235, GPIO_PORT236, GPIO_PORT237, GPIO_PORT238, GPIO_PORT239, + + GPIO_PORT240, GPIO_PORT241, GPIO_PORT242, GPIO_PORT243, GPIO_PORT244, + GPIO_PORT245, GPIO_PORT246, GPIO_PORT247, GPIO_PORT248, GPIO_PORT249, + + GPIO_PORT250, GPIO_PORT251, GPIO_PORT252, GPIO_PORT253, GPIO_PORT254, + GPIO_PORT255, GPIO_PORT256, GPIO_PORT257, GPIO_PORT258, GPIO_PORT259, + + GPIO_PORT260, GPIO_PORT261, GPIO_PORT262, GPIO_PORT263, GPIO_PORT264, + + /* Special Pull-up / Pull-down Functions */ + GPIO_FN_PORT66_KEYIN0_PU, GPIO_FN_PORT67_KEYIN1_PU, + GPIO_FN_PORT68_KEYIN2_PU, GPIO_FN_PORT69_KEYIN3_PU, + GPIO_FN_PORT70_KEYIN4_PU, GPIO_FN_PORT71_KEYIN5_PU, + GPIO_FN_PORT72_KEYIN6_PU, + + /* 55-1 (FN) */ + GPIO_FN_VBUS_0, + GPIO_FN_CPORT0, + GPIO_FN_CPORT1, + GPIO_FN_CPORT2, + GPIO_FN_CPORT3, + GPIO_FN_CPORT4, + GPIO_FN_CPORT5, + GPIO_FN_CPORT6, + GPIO_FN_CPORT7, + GPIO_FN_CPORT8, + GPIO_FN_CPORT9, + GPIO_FN_CPORT10, + GPIO_FN_CPORT11, GPIO_FN_SIN2, + GPIO_FN_CPORT12, GPIO_FN_XCTS2, + GPIO_FN_CPORT13, GPIO_FN_RFSPO4, + GPIO_FN_CPORT14, GPIO_FN_RFSPO5, + GPIO_FN_CPORT15, GPIO_FN_SCIFA0_SCK, GPIO_FN_GPS_AGC2, + GPIO_FN_CPORT16, GPIO_FN_SCIFA0_TXD, GPIO_FN_GPS_AGC3, + GPIO_FN_CPORT17_IC_OE, GPIO_FN_SOUT2, + GPIO_FN_CPORT18, GPIO_FN_XRTS2, GPIO_FN_PORT19_VIO_CKO2, + GPIO_FN_CPORT19_MPORT1, + GPIO_FN_CPORT20, GPIO_FN_RFSPO6, + GPIO_FN_CPORT21, GPIO_FN_STATUS0, + GPIO_FN_CPORT22, GPIO_FN_STATUS1, + GPIO_FN_CPORT23, GPIO_FN_STATUS2, GPIO_FN_RFSPO7, + GPIO_FN_B_SYNLD1, + GPIO_FN_B_SYNLD2, GPIO_FN_SYSENMSK, + GPIO_FN_XMAINPS, + GPIO_FN_XDIVPS, + GPIO_FN_XIDRST, + GPIO_FN_IDCLK, GPIO_FN_IC_DP, + GPIO_FN_IDIO, GPIO_FN_IC_DM, + GPIO_FN_SOUT1, GPIO_FN_SCIFA4_TXD, GPIO_FN_M02_BERDAT, + GPIO_FN_SIN1, GPIO_FN_SCIFA4_RXD, GPIO_FN_XWUP, + GPIO_FN_XRTS1, GPIO_FN_SCIFA4_RTS, GPIO_FN_M03_BERCLK, + GPIO_FN_XCTS1, GPIO_FN_SCIFA4_CTS, + GPIO_FN_PCMCLKO, + GPIO_FN_SYNC8KO, + + /* 55-2 (FN) */ + GPIO_FN_DNPCM_A, + GPIO_FN_UPPCM_A, + GPIO_FN_VACK, + GPIO_FN_XTALB1L, + GPIO_FN_GPS_AGC1, GPIO_FN_SCIFA0_RTS, + GPIO_FN_GPS_AGC4, GPIO_FN_SCIFA0_RXD, + GPIO_FN_GPS_PWRDOWN, GPIO_FN_SCIFA0_CTS, + GPIO_FN_GPS_IM, + GPIO_FN_GPS_IS, + GPIO_FN_GPS_QM, + GPIO_FN_GPS_QS, + GPIO_FN_FMSOCK, GPIO_FN_PORT49_IRDA_OUT, GPIO_FN_PORT49_IROUT, + GPIO_FN_FMSOOLR, GPIO_FN_BBIF2_TSYNC2, GPIO_FN_TPU2TO2, GPIO_FN_IPORT3, + GPIO_FN_FMSIOLR, + GPIO_FN_FMSOOBT, GPIO_FN_BBIF2_TSCK2, GPIO_FN_TPU2TO3, GPIO_FN_OPORT1, + GPIO_FN_FMSIOBT, + GPIO_FN_FMSOSLD, GPIO_FN_BBIF2_TXD2, GPIO_FN_OPORT2, + GPIO_FN_FMSOILR, GPIO_FN_PORT53_IRDA_IN, GPIO_FN_TPU3TO3, + GPIO_FN_OPORT3, GPIO_FN_FMSIILR, + GPIO_FN_FMSOIBT, GPIO_FN_PORT54_IRDA_FIRSEL, GPIO_FN_TPU3TO2, + GPIO_FN_FMSIIBT, + GPIO_FN_FMSISLD, GPIO_FN_MFG0_OUT1, GPIO_FN_TPU0TO0, + GPIO_FN_A0_EA0, GPIO_FN_BS, + GPIO_FN_A12_EA12, GPIO_FN_PORT58_VIO_CKOR, GPIO_FN_TPU4TO2, + GPIO_FN_A13_EA13, GPIO_FN_PORT59_IROUT, GPIO_FN_MFG0_OUT2, + GPIO_FN_TPU0TO1, + GPIO_FN_A14_EA14, GPIO_FN_PORT60_KEYOUT5, + GPIO_FN_A15_EA15, GPIO_FN_PORT61_KEYOUT4, + GPIO_FN_A16_EA16, GPIO_FN_PORT62_KEYOUT3, GPIO_FN_MSIOF0_SS1, + GPIO_FN_A17_EA17, GPIO_FN_PORT63_KEYOUT2, GPIO_FN_MSIOF0_TSYNC, + GPIO_FN_A18_EA18, GPIO_FN_PORT64_KEYOUT1, GPIO_FN_MSIOF0_TSCK, + GPIO_FN_A19_EA19, GPIO_FN_PORT65_KEYOUT0, GPIO_FN_MSIOF0_TXD, + GPIO_FN_A20_EA20, GPIO_FN_PORT66_KEYIN0, GPIO_FN_MSIOF0_RSCK, + GPIO_FN_A21_EA21, GPIO_FN_PORT67_KEYIN1, GPIO_FN_MSIOF0_RSYNC, + GPIO_FN_A22_EA22, GPIO_FN_PORT68_KEYIN2, GPIO_FN_MSIOF0_MCK0, + GPIO_FN_A23_EA23, GPIO_FN_PORT69_KEYIN3, GPIO_FN_MSIOF0_MCK1, + GPIO_FN_A24_EA24, GPIO_FN_PORT70_KEYIN4, GPIO_FN_MSIOF0_RXD, + GPIO_FN_A25_EA25, GPIO_FN_PORT71_KEYIN5, GPIO_FN_MSIOF0_SS2, + GPIO_FN_A26, GPIO_FN_PORT72_KEYIN6, + GPIO_FN_D0_ED0_NAF0, + GPIO_FN_D1_ED1_NAF1, + GPIO_FN_D2_ED2_NAF2, + GPIO_FN_D3_ED3_NAF3, + GPIO_FN_D4_ED4_NAF4, + GPIO_FN_D5_ED5_NAF5, + GPIO_FN_D6_ED6_NAF6, + GPIO_FN_D7_ED7_NAF7, + GPIO_FN_D8_ED8_NAF8, + GPIO_FN_D9_ED9_NAF9, + GPIO_FN_D10_ED10_NAF10, + GPIO_FN_D11_ED11_NAF11, + GPIO_FN_D12_ED12_NAF12, + GPIO_FN_D13_ED13_NAF13, + GPIO_FN_D14_ED14_NAF14, + GPIO_FN_D15_ED15_NAF15, + GPIO_FN_CS4, + GPIO_FN_CS5A, GPIO_FN_FMSICK, + GPIO_FN_CS5B, GPIO_FN_FCE1, + + /* 55-3 (FN) */ + GPIO_FN_CS6B, GPIO_FN_XCS2, GPIO_FN_CS6A, GPIO_FN_DACK0, + GPIO_FN_FCE0, + GPIO_FN_WAIT, GPIO_FN_DREQ0, + GPIO_FN_RD_XRD, + GPIO_FN_WE0_XWR0_FWE, + GPIO_FN_WE1_XWR1, + GPIO_FN_FRB, + GPIO_FN_CKO, + GPIO_FN_NBRSTOUT, + GPIO_FN_NBRST, + GPIO_FN_GPS_EPPSIN, + GPIO_FN_LATCHPULSE, + GPIO_FN_LTESIGNAL, + GPIO_FN_LEGACYSTATE, + GPIO_FN_TCKON, + GPIO_FN_VIO_VD, GPIO_FN_PORT128_KEYOUT0, GPIO_FN_IPORT0, + GPIO_FN_VIO_HD, GPIO_FN_PORT129_KEYOUT1, GPIO_FN_IPORT1, + GPIO_FN_VIO_D0, GPIO_FN_PORT130_KEYOUT2, GPIO_FN_PORT130_MSIOF2_RXD, + GPIO_FN_VIO_D1, GPIO_FN_PORT131_KEYOUT3, GPIO_FN_PORT131_MSIOF2_SS1, + GPIO_FN_VIO_D2, GPIO_FN_PORT132_KEYOUT4, GPIO_FN_PORT132_MSIOF2_SS2, + GPIO_FN_VIO_D3, GPIO_FN_PORT133_KEYOUT5, GPIO_FN_PORT133_MSIOF2_TSYNC, + GPIO_FN_VIO_D4, GPIO_FN_PORT134_KEYIN0, GPIO_FN_PORT134_MSIOF2_TXD, + GPIO_FN_VIO_D5, GPIO_FN_PORT135_KEYIN1, GPIO_FN_PORT135_MSIOF2_TSCK, + GPIO_FN_VIO_D6, GPIO_FN_PORT136_KEYIN2, + GPIO_FN_VIO_D7, GPIO_FN_PORT137_KEYIN3, + GPIO_FN_VIO_D8, GPIO_FN_M9_SLCD_A01, GPIO_FN_PORT138_FSIAOMC, + GPIO_FN_VIO_D9, GPIO_FN_M10_SLCD_CK1, GPIO_FN_PORT139_FSIAOLR, + GPIO_FN_VIO_D10, GPIO_FN_M11_SLCD_SO1, GPIO_FN_TPU0TO2, + GPIO_FN_PORT140_FSIAOBT, + GPIO_FN_VIO_D11, GPIO_FN_M12_SLCD_CE1, GPIO_FN_TPU0TO3, + GPIO_FN_PORT141_FSIAOSLD, + GPIO_FN_VIO_D12, GPIO_FN_M13_BSW, GPIO_FN_PORT142_FSIACK, + GPIO_FN_VIO_D13, GPIO_FN_M14_GSW, GPIO_FN_PORT143_FSIAILR, + GPIO_FN_VIO_D14, GPIO_FN_M15_RSW, GPIO_FN_PORT144_FSIAIBT, + GPIO_FN_VIO_D15, GPIO_FN_TPU1TO3, GPIO_FN_PORT145_FSIAISLD, + GPIO_FN_VIO_CLK, GPIO_FN_PORT146_KEYIN4, GPIO_FN_IPORT2, + GPIO_FN_VIO_FIELD, GPIO_FN_PORT147_KEYIN5, + GPIO_FN_VIO_CKO, GPIO_FN_PORT148_KEYIN6, + GPIO_FN_A27, GPIO_FN_RDWR_XWE, GPIO_FN_MFG0_IN1, + GPIO_FN_MFG0_IN2, + GPIO_FN_TS_SPSYNC3, GPIO_FN_MSIOF2_RSCK, + GPIO_FN_TS_SDAT3, GPIO_FN_MSIOF2_RSYNC, + GPIO_FN_TPU1TO2, GPIO_FN_TS_SDEN3, GPIO_FN_PORT153_MSIOF2_SS1, + GPIO_FN_SOUT3, GPIO_FN_SCIFA2_TXD1, GPIO_FN_MSIOF2_MCK0, + GPIO_FN_SIN3, GPIO_FN_SCIFA2_RXD1, GPIO_FN_MSIOF2_MCK1, + GPIO_FN_XRTS3, GPIO_FN_SCIFA2_RTS1, GPIO_FN_PORT156_MSIOF2_SS2, + GPIO_FN_XCTS3, GPIO_FN_SCIFA2_CTS1, GPIO_FN_PORT157_MSIOF2_RXD, + + /* 55-4 (FN) */ + GPIO_FN_DINT, GPIO_FN_SCIFA2_SCK1, GPIO_FN_TS_SCK3, + GPIO_FN_PORT159_SCIFB_SCK, GPIO_FN_PORT159_SCIFA5_SCK, GPIO_FN_NMI, + GPIO_FN_PORT160_SCIFB_TXD, GPIO_FN_PORT160_SCIFA5_TXD, GPIO_FN_SOUT0, + GPIO_FN_PORT161_SCIFB_CTS, GPIO_FN_PORT161_SCIFA5_CTS, GPIO_FN_XCTS0, + GPIO_FN_MFG3_IN2, + GPIO_FN_PORT162_SCIFB_RXD, GPIO_FN_PORT162_SCIFA5_RXD, GPIO_FN_SIN0, + GPIO_FN_MFG3_IN1, + GPIO_FN_PORT163_SCIFB_RTS, GPIO_FN_PORT163_SCIFA5_RTS, GPIO_FN_XRTS0, + GPIO_FN_MFG3_OUT1, + GPIO_FN_TPU3TO0, + GPIO_FN_LCDD0, GPIO_FN_PORT192_KEYOUT0, GPIO_FN_EXT_CKI, + GPIO_FN_LCDD1, GPIO_FN_PORT193_KEYOUT1, GPIO_FN_PORT193_SCIFA5_CTS, + GPIO_FN_BBIF2_TSYNC1, + GPIO_FN_LCDD2, GPIO_FN_PORT194_KEYOUT2, GPIO_FN_PORT194_SCIFA5_RTS, + GPIO_FN_BBIF2_TSCK1, + GPIO_FN_LCDD3, GPIO_FN_PORT195_KEYOUT3, GPIO_FN_PORT195_SCIFA5_RXD, + GPIO_FN_BBIF2_TXD1, + GPIO_FN_LCDD4, GPIO_FN_PORT196_KEYOUT4, GPIO_FN_PORT196_SCIFA5_TXD, + GPIO_FN_LCDD5, GPIO_FN_PORT197_KEYOUT5, GPIO_FN_PORT197_SCIFA5_SCK, + GPIO_FN_MFG2_OUT2, GPIO_FN_TPU2TO1, + GPIO_FN_LCDD6, GPIO_FN_XWR2, + GPIO_FN_LCDD7, GPIO_FN_TPU4TO1, GPIO_FN_MFG4_OUT2, GPIO_FN_XWR3, + GPIO_FN_LCDD8, GPIO_FN_PORT200_KEYIN0, GPIO_FN_VIO_DR0, GPIO_FN_D16, + GPIO_FN_ED16, + GPIO_FN_LCDD9, GPIO_FN_PORT201_KEYIN1, GPIO_FN_VIO_DR1, GPIO_FN_D17, + GPIO_FN_ED17, + GPIO_FN_LCDD10, GPIO_FN_PORT202_KEYIN2, GPIO_FN_VIO_DR2, GPIO_FN_D18, + GPIO_FN_ED18, + GPIO_FN_LCDD11, GPIO_FN_PORT203_KEYIN3, GPIO_FN_VIO_DR3, GPIO_FN_D19, + GPIO_FN_ED19, + GPIO_FN_LCDD12, GPIO_FN_PORT204_KEYIN4, GPIO_FN_VIO_DR4, GPIO_FN_D20, + GPIO_FN_ED20, + GPIO_FN_LCDD13, GPIO_FN_PORT205_KEYIN5, GPIO_FN_VIO_DR5, GPIO_FN_D21, + GPIO_FN_ED21, + GPIO_FN_LCDD14, GPIO_FN_PORT206_KEYIN6, GPIO_FN_VIO_DR6, GPIO_FN_D22, + GPIO_FN_ED22, + GPIO_FN_LCDD15, GPIO_FN_PORT207_MSIOF0L_SS1, GPIO_FN_PORT207_KEYOUT0, + GPIO_FN_VIO_DR7, + GPIO_FN_D23, GPIO_FN_ED23, + GPIO_FN_LCDD16, GPIO_FN_PORT208_MSIOF0L_SS2, GPIO_FN_PORT208_KEYOUT1, + GPIO_FN_VIO_VDR, + GPIO_FN_D24, GPIO_FN_ED24, + GPIO_FN_LCDD17, GPIO_FN_PORT209_KEYOUT2, GPIO_FN_VIO_HDR, GPIO_FN_D25, + GPIO_FN_ED25, + GPIO_FN_LCDD18, GPIO_FN_DREQ2, GPIO_FN_PORT210_MSIOF0L_SS1, GPIO_FN_D26, + GPIO_FN_ED26, + GPIO_FN_LCDD19, GPIO_FN_PORT211_MSIOF0L_SS2, GPIO_FN_D27, GPIO_FN_ED27, + GPIO_FN_LCDD20, GPIO_FN_TS_SPSYNC1, GPIO_FN_MSIOF0L_MCK0, GPIO_FN_D28, + GPIO_FN_ED28, + GPIO_FN_LCDD21, GPIO_FN_TS_SDAT1, GPIO_FN_MSIOF0L_MCK1, GPIO_FN_D29, + GPIO_FN_ED29, + GPIO_FN_LCDD22, GPIO_FN_TS_SDEN1, GPIO_FN_MSIOF0L_RSCK, GPIO_FN_D30, + GPIO_FN_ED30, + GPIO_FN_LCDD23, GPIO_FN_TS_SCK1, GPIO_FN_MSIOF0L_RSYNC, GPIO_FN_D31, + GPIO_FN_ED31, + GPIO_FN_LCDDCK, GPIO_FN_LCDWR, GPIO_FN_PORT216_KEYOUT3, + GPIO_FN_VIO_CLKR, + GPIO_FN_LCDRD, GPIO_FN_DACK2, GPIO_FN_MSIOF0L_TSYNC, + GPIO_FN_LCDHSYN, GPIO_FN_LCDCS, GPIO_FN_LCDCS2, GPIO_FN_DACK3, + GPIO_FN_PORT218_VIO_CKOR, GPIO_FN_PORT218_KEYOUT4, + GPIO_FN_LCDDISP, GPIO_FN_LCDRS, GPIO_FN_DREQ3, GPIO_FN_MSIOF0L_TSCK, + GPIO_FN_LCDVSYN, GPIO_FN_LCDVSYN2, GPIO_FN_PORT220_KEYOUT5, + GPIO_FN_LCDLCLK, GPIO_FN_DREQ1, GPIO_FN_PWEN, GPIO_FN_MSIOF0L_RXD, + GPIO_FN_LCDDON, GPIO_FN_LCDDON2, GPIO_FN_DACK1, GPIO_FN_OVCN, + GPIO_FN_MSIOF0L_TXD, + GPIO_FN_SCIFA1_TXD, GPIO_FN_OVCN2, + GPIO_FN_EXTLP, GPIO_FN_SCIFA1_SCK, GPIO_FN_USBTERM, + GPIO_FN_PORT226_VIO_CKO2, + GPIO_FN_SCIFA1_RTS, GPIO_FN_IDIN, + GPIO_FN_SCIFA1_RXD, + GPIO_FN_SCIFA1_CTS, GPIO_FN_MFG1_IN1, + GPIO_FN_MSIOF1_TXD, GPIO_FN_SCIFA2_TXD2, GPIO_FN_PORT230_FSIAOMC, + GPIO_FN_MSIOF1_TSYNC, GPIO_FN_SCIFA2_CTS2, GPIO_FN_PORT231_FSIAOLR, + GPIO_FN_MSIOF1_TSCK, GPIO_FN_SCIFA2_SCK2, GPIO_FN_PORT232_FSIAOBT, + GPIO_FN_MSIOF1_RXD, GPIO_FN_SCIFA2_RXD2, GPIO_FN_GPS_VCOTRIG, + GPIO_FN_PORT233_FSIACK, + GPIO_FN_MSIOF1_RSCK, GPIO_FN_SCIFA2_RTS2, GPIO_FN_PORT234_FSIAOSLD, + GPIO_FN_MSIOF1_RSYNC, GPIO_FN_OPORT0, GPIO_FN_MFG1_IN2, + GPIO_FN_PORT235_FSIAILR, + GPIO_FN_MSIOF1_MCK0, GPIO_FN_I2C_SDA2, GPIO_FN_PORT236_FSIAIBT, + GPIO_FN_MSIOF1_MCK1, GPIO_FN_I2C_SCL2, GPIO_FN_PORT237_FSIAISLD, + GPIO_FN_MSIOF1_SS1, GPIO_FN_EDBGREQ3, + + /* 55-5 (FN) */ + GPIO_FN_MSIOF1_SS2, + GPIO_FN_SCIFA6_TXD, + GPIO_FN_PORT241_IRDA_OUT, GPIO_FN_PORT241_IROUT, GPIO_FN_MFG4_OUT1, + GPIO_FN_TPU4TO0, + GPIO_FN_PORT242_IRDA_IN, GPIO_FN_MFG4_IN2, + GPIO_FN_PORT243_IRDA_FIRSEL, GPIO_FN_PORT243_VIO_CKO2, + GPIO_FN_PORT244_SCIFA5_CTS, GPIO_FN_MFG2_IN1, GPIO_FN_PORT244_SCIFB_CTS, + GPIO_FN_PORT244_MSIOF2_RXD, + GPIO_FN_PORT245_SCIFA5_RTS, GPIO_FN_MFG2_IN2, GPIO_FN_PORT245_SCIFB_RTS, + GPIO_FN_PORT245_MSIOF2_TXD, + GPIO_FN_PORT246_SCIFA5_RXD, GPIO_FN_MFG1_OUT1, + GPIO_FN_PORT246_SCIFB_RXD, GPIO_FN_TPU1TO0, + GPIO_FN_PORT247_SCIFA5_TXD, GPIO_FN_MFG3_OUT2, + GPIO_FN_PORT247_SCIFB_TXD, GPIO_FN_TPU3TO1, + GPIO_FN_PORT248_SCIFA5_SCK, GPIO_FN_MFG2_OUT1, + GPIO_FN_PORT248_SCIFB_SCK, GPIO_FN_TPU2TO0, + GPIO_FN_PORT248_MSIOF2_TSCK, + GPIO_FN_PORT249_IROUT, GPIO_FN_MFG4_IN1, GPIO_FN_PORT249_MSIOF2_TSYNC, + GPIO_FN_SDHICLK0, GPIO_FN_TCK2_SWCLK_MC0, + GPIO_FN_SDHICD0, + GPIO_FN_SDHID0_0, GPIO_FN_TMS2_SWDIO_MC0, + GPIO_FN_SDHID0_1, GPIO_FN_TDO2_SWO0_MC0, + GPIO_FN_SDHID0_2, GPIO_FN_TDI2, + GPIO_FN_SDHID0_3, GPIO_FN_RTCK2_SWO1_MC0, + GPIO_FN_SDHICMD0, GPIO_FN_TRST2, + GPIO_FN_SDHIWP0, GPIO_FN_EDBGREQ2, + GPIO_FN_SDHICLK1, GPIO_FN_TCK3_SWCLK_MC1, + GPIO_FN_SDHID1_0, GPIO_FN_M11_SLCD_SO2, GPIO_FN_TS_SPSYNC2, + GPIO_FN_TMS3_SWDIO_MC1, + GPIO_FN_SDHID1_1, GPIO_FN_M9_SLCD_A02, GPIO_FN_TS_SDAT2, + GPIO_FN_TDO3_SWO0_MC1, + GPIO_FN_SDHID1_2, GPIO_FN_M10_SLCD_CK2, GPIO_FN_TS_SDEN2, GPIO_FN_TDI3, + GPIO_FN_SDHID1_3, GPIO_FN_M12_SLCD_CE2, GPIO_FN_TS_SCK2, + GPIO_FN_RTCK3_SWO1_MC1, + GPIO_FN_SDHICMD1, GPIO_FN_TRST3, + GPIO_FN_RESETOUTS, +}; + +#endif /* __ASM_SH7377_H__ */ diff --git a/arch/arm/mach-shmobile/include/mach/system.h b/arch/arm/mach-shmobile/include/mach/system.h new file mode 100644 index 00000000000..76a687eeaa2 --- /dev/null +++ b/arch/arm/mach-shmobile/include/mach/system.h @@ -0,0 +1,14 @@ +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +static inline void arch_idle(void) +{ + cpu_do_idle(); +} + +static inline void arch_reset(char mode, const char *cmd) +{ + cpu_reset(0); +} + +#endif diff --git a/arch/arm/mach-shmobile/include/mach/timex.h b/arch/arm/mach-shmobile/include/mach/timex.h new file mode 100644 index 00000000000..ae0d8d825c2 --- /dev/null +++ b/arch/arm/mach-shmobile/include/mach/timex.h @@ -0,0 +1,6 @@ +#ifndef __ASM_MACH_TIMEX_H +#define __ASM_MACH_TIMEX_H + +#define CLOCK_TICK_RATE 1193180 /* unused i8253 PIT value */ + +#endif /* __ASM_MACH_TIMEX_H */ diff --git a/arch/arm/mach-shmobile/include/mach/uncompress.h b/arch/arm/mach-shmobile/include/mach/uncompress.h new file mode 100644 index 00000000000..0bd7556b138 --- /dev/null +++ b/arch/arm/mach-shmobile/include/mach/uncompress.h @@ -0,0 +1,21 @@ +#ifndef __ASM_MACH_UNCOMPRESS_H +#define __ASM_MACH_UNCOMPRESS_H + +/* + * This does not append a newline + */ +static void putc(int c) +{ +} + +static inline void flush(void) +{ +} + +static void arch_decomp_setup(void) +{ +} + +#define arch_decomp_wdog() + +#endif /* __ASM_MACH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-shmobile/include/mach/vmalloc.h b/arch/arm/mach-shmobile/include/mach/vmalloc.h new file mode 100644 index 00000000000..fb3c4f1ab25 --- /dev/null +++ b/arch/arm/mach-shmobile/include/mach/vmalloc.h @@ -0,0 +1,6 @@ +#ifndef __ASM_MACH_VMALLOC_H +#define __ASM_MACH_VMALLOC_H + +#define VMALLOC_END (PAGE_OFFSET + 0x24000000) + +#endif /* __ASM_MACH_VMALLOC_H */ diff --git a/arch/arm/mach-shmobile/intc-sh7367.c b/arch/arm/mach-shmobile/intc-sh7367.c new file mode 100644 index 00000000000..6a547b47aab --- /dev/null +++ b/arch/arm/mach-shmobile/intc-sh7367.c @@ -0,0 +1,270 @@ +/* + * sh7367 processor support - INTC hardware block + * + * Copyright (C) 2010 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <linux/sh_intc.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +enum { + UNUSED_INTCA = 0, + + /* interrupt sources INTCA */ + IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A, + IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A, + DIRC, + CRYPT1_ERR, CRYPT2_STD, + IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1, + ARM11_IRQPMU, ARM11_COMMTX, ARM11_COMMRX, + ETM11_ACQCMP, ETM11_FULL, + MFI_MFIM, MFI_MFIS, + BBIF1, BBIF2, + USBDMAC_USHDMI, + USBHS_USHI0, USBHS_USHI1, + CMT1_CMT10, CMT1_CMT11, CMT1_CMT12, CMT1_CMT13, CMT2, CMT3, + KEYSC_KEY, + SCIFA0, SCIFA1, SCIFA2, SCIFA3, + MSIOF2, MSIOF1, + SCIFA4, SCIFA5, SCIFB, + FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I, + SDHI0_SDHI0I0, SDHI0_SDHI0I1, SDHI0_SDHI0I2, SDHI0_SDHI0I3, + SDHI1_SDHI1I0, SDHI1_SDHI1I1, SDHI1_SDHI1I2, SDHI1_SDHI1I3, + MSU_MSU, MSU_MSU2, + IREM, + SIU, + SPU, + IRDA, + TPU0, TPU1, TPU2, TPU3, TPU4, + LCRC, + PINT1, PINT2, + TTI20, + MISTY, + DDM, + SDHI2_SDHI2I0, SDHI2_SDHI2I1, SDHI2_SDHI2I2, SDHI2_SDHI2I3, + RWDT0, RWDT1, + DMAC_1_DEI0, DMAC_1_DEI1, DMAC_1_DEI2, DMAC_1_DEI3, + DMAC_2_DEI4, DMAC_2_DEI5, DMAC_2_DADERR, + DMAC2_1_DEI0, DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3, + DMAC2_2_DEI4, DMAC2_2_DEI5, DMAC2_2_DADERR, + DMAC3_1_DEI0, DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3, + DMAC3_2_DEI4, DMAC3_2_DEI5, DMAC3_2_DADERR, + + /* interrupt groups INTCA */ + DMAC_1, DMAC_2, DMAC2_1, DMAC2_2, DMAC3_1, DMAC3_2, + ETM11, ARM11, USBHS, FLCTL, IIC1, SDHI0, SDHI1, SDHI2, +}; + +static struct intc_vect intca_vectors[] = { + INTC_VECT(IRQ0A, 0x0200), INTC_VECT(IRQ1A, 0x0220), + INTC_VECT(IRQ2A, 0x0240), INTC_VECT(IRQ3A, 0x0260), + INTC_VECT(IRQ4A, 0x0280), INTC_VECT(IRQ5A, 0x02a0), + INTC_VECT(IRQ6A, 0x02c0), INTC_VECT(IRQ7A, 0x02e0), + INTC_VECT(IRQ8A, 0x0300), INTC_VECT(IRQ9A, 0x0320), + INTC_VECT(IRQ10A, 0x0340), INTC_VECT(IRQ11A, 0x0360), + INTC_VECT(IRQ12A, 0x0380), INTC_VECT(IRQ13A, 0x03a0), + INTC_VECT(IRQ14A, 0x03c0), INTC_VECT(IRQ15A, 0x03e0), + INTC_VECT(DIRC, 0x0560), + INTC_VECT(CRYPT1_ERR, 0x05e0), + INTC_VECT(CRYPT2_STD, 0x0700), + INTC_VECT(IIC1_ALI1, 0x0780), INTC_VECT(IIC1_TACKI1, 0x07a0), + INTC_VECT(IIC1_WAITI1, 0x07c0), INTC_VECT(IIC1_DTEI1, 0x07e0), + INTC_VECT(ARM11_IRQPMU, 0x0800), INTC_VECT(ARM11_COMMTX, 0x0840), + INTC_VECT(ARM11_COMMRX, 0x0860), + INTC_VECT(ETM11_ACQCMP, 0x0880), INTC_VECT(ETM11_FULL, 0x08a0), + INTC_VECT(MFI_MFIM, 0x0900), INTC_VECT(MFI_MFIS, 0x0920), + INTC_VECT(BBIF1, 0x0940), INTC_VECT(BBIF2, 0x0960), + INTC_VECT(USBDMAC_USHDMI, 0x0a00), + INTC_VECT(USBHS_USHI0, 0x0a20), INTC_VECT(USBHS_USHI1, 0x0a40), + INTC_VECT(CMT1_CMT10, 0x0b00), INTC_VECT(CMT1_CMT11, 0x0b20), + INTC_VECT(CMT1_CMT12, 0x0b40), INTC_VECT(CMT1_CMT13, 0x0b60), + INTC_VECT(CMT2, 0x0b80), INTC_VECT(CMT3, 0x0ba0), + INTC_VECT(KEYSC_KEY, 0x0be0), + INTC_VECT(SCIFA0, 0x0c00), INTC_VECT(SCIFA1, 0x0c20), + INTC_VECT(SCIFA2, 0x0c40), INTC_VECT(SCIFA3, 0x0c60), + INTC_VECT(MSIOF2, 0x0c80), INTC_VECT(MSIOF1, 0x0d00), + INTC_VECT(SCIFA4, 0x0d20), INTC_VECT(SCIFA5, 0x0d40), + INTC_VECT(SCIFB, 0x0d60), + INTC_VECT(FLCTL_FLSTEI, 0x0d80), INTC_VECT(FLCTL_FLTENDI, 0x0da0), + INTC_VECT(FLCTL_FLTREQ0I, 0x0dc0), INTC_VECT(FLCTL_FLTREQ1I, 0x0de0), + INTC_VECT(SDHI0_SDHI0I0, 0x0e00), INTC_VECT(SDHI0_SDHI0I1, 0x0e20), + INTC_VECT(SDHI0_SDHI0I2, 0x0e40), INTC_VECT(SDHI0_SDHI0I3, 0x0e60), + INTC_VECT(SDHI1_SDHI1I0, 0x0e80), INTC_VECT(SDHI1_SDHI1I1, 0x0ea0), + INTC_VECT(SDHI1_SDHI1I2, 0x0ec0), INTC_VECT(SDHI1_SDHI1I3, 0x0ee0), + INTC_VECT(MSU_MSU, 0x0f20), INTC_VECT(MSU_MSU2, 0x0f40), + INTC_VECT(IREM, 0x0f60), + INTC_VECT(SIU, 0x0fa0), + INTC_VECT(SPU, 0x0fc0), + INTC_VECT(IRDA, 0x0480), + INTC_VECT(TPU0, 0x04a0), INTC_VECT(TPU1, 0x04c0), + INTC_VECT(TPU2, 0x04e0), INTC_VECT(TPU3, 0x0500), + INTC_VECT(TPU4, 0x0520), + INTC_VECT(LCRC, 0x0540), + INTC_VECT(PINT1, 0x1000), INTC_VECT(PINT2, 0x1020), + INTC_VECT(TTI20, 0x1100), + INTC_VECT(MISTY, 0x1120), + INTC_VECT(DDM, 0x1140), + INTC_VECT(SDHI2_SDHI2I0, 0x1200), INTC_VECT(SDHI2_SDHI2I1, 0x1220), + INTC_VECT(SDHI2_SDHI2I2, 0x1240), INTC_VECT(SDHI2_SDHI2I3, 0x1260), + INTC_VECT(RWDT0, 0x1280), INTC_VECT(RWDT1, 0x12a0), + INTC_VECT(DMAC_1_DEI0, 0x2000), INTC_VECT(DMAC_1_DEI1, 0x2020), + INTC_VECT(DMAC_1_DEI2, 0x2040), INTC_VECT(DMAC_1_DEI3, 0x2060), + INTC_VECT(DMAC_2_DEI4, 0x2080), INTC_VECT(DMAC_2_DEI5, 0x20a0), + INTC_VECT(DMAC_2_DADERR, 0x20c0), + INTC_VECT(DMAC2_1_DEI0, 0x2100), INTC_VECT(DMAC2_1_DEI1, 0x2120), + INTC_VECT(DMAC2_1_DEI2, 0x2140), INTC_VECT(DMAC2_1_DEI3, 0x2160), + INTC_VECT(DMAC2_2_DEI4, 0x2180), INTC_VECT(DMAC2_2_DEI5, 0x21a0), + INTC_VECT(DMAC2_2_DADERR, 0x21c0), + INTC_VECT(DMAC3_1_DEI0, 0x2200), INTC_VECT(DMAC3_1_DEI1, 0x2220), + INTC_VECT(DMAC3_1_DEI2, 0x2240), INTC_VECT(DMAC3_1_DEI3, 0x2260), + INTC_VECT(DMAC3_2_DEI4, 0x2280), INTC_VECT(DMAC3_2_DEI5, 0x22a0), + INTC_VECT(DMAC3_2_DADERR, 0x22c0), +}; + +static struct intc_group intca_groups[] __initdata = { + INTC_GROUP(DMAC_1, DMAC_1_DEI0, + DMAC_1_DEI1, DMAC_1_DEI2, DMAC_1_DEI3), + INTC_GROUP(DMAC_2, DMAC_2_DEI4, + DMAC_2_DEI5, DMAC_2_DADERR), + INTC_GROUP(DMAC2_1, DMAC2_1_DEI0, + DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3), + INTC_GROUP(DMAC2_2, DMAC2_2_DEI4, + DMAC2_2_DEI5, DMAC2_2_DADERR), + INTC_GROUP(DMAC3_1, DMAC3_1_DEI0, + DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3), + INTC_GROUP(DMAC3_2, DMAC3_2_DEI4, + DMAC3_2_DEI5, DMAC3_2_DADERR), + INTC_GROUP(ETM11, ETM11_ACQCMP, ETM11_FULL), + INTC_GROUP(ARM11, ARM11_IRQPMU, ARM11_COMMTX, ARM11_COMMTX), + INTC_GROUP(USBHS, USBHS_USHI0, USBHS_USHI1), + INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLTENDI, + FLCTL_FLTREQ0I, FLCTL_FLTREQ1I), + INTC_GROUP(IIC1, IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1), + INTC_GROUP(SDHI0, SDHI0_SDHI0I0, SDHI0_SDHI0I1, + SDHI0_SDHI0I2, SDHI0_SDHI0I3), + INTC_GROUP(SDHI1, SDHI1_SDHI1I0, SDHI1_SDHI1I1, + SDHI1_SDHI1I2, SDHI1_SDHI1I3), + INTC_GROUP(SDHI2, SDHI2_SDHI2I0, SDHI2_SDHI2I1, + SDHI2_SDHI2I2, SDHI2_SDHI2I3), +}; + +static struct intc_mask_reg intca_mask_registers[] = { + { 0xe6900040, 0xe6900060, 8, /* INTMSK00A / INTMSKCLR00A */ + { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } }, + { 0xe6900044, 0xe6900064, 8, /* INTMSK10A / INTMSKCLR10A */ + { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } }, + { 0xe6940080, 0xe69400c0, 8, /* IMR0A / IMCR0A */ + { DMAC2_1_DEI3, DMAC2_1_DEI2, DMAC2_1_DEI1, DMAC2_1_DEI0, + ARM11_IRQPMU, 0, ARM11_COMMTX, ARM11_COMMRX } }, + { 0xe6940084, 0xe69400c4, 8, /* IMR1A / IMCR1A */ + { CRYPT1_ERR, CRYPT2_STD, DIRC, 0, + DMAC_1_DEI3, DMAC_1_DEI2, DMAC_1_DEI1, DMAC_1_DEI0 } }, + { 0xe6940088, 0xe69400c8, 8, /* IMR2A / IMCR2A */ + { PINT1, PINT2, 0, 0, + BBIF1, BBIF2, MFI_MFIS, MFI_MFIM } }, + { 0xe694008c, 0xe69400cc, 8, /* IMR3A / IMCR3A */ + { DMAC3_1_DEI3, DMAC3_1_DEI2, DMAC3_1_DEI1, DMAC3_1_DEI0, + DMAC3_2_DADERR, DMAC3_2_DEI5, DMAC3_2_DEI4, IRDA } }, + { 0xe6940090, 0xe69400d0, 8, /* IMR4A / IMCR4A */ + { DDM, 0, 0, 0, + 0, 0, ETM11_FULL, ETM11_ACQCMP } }, + { 0xe6940094, 0xe69400d4, 8, /* IMR5A / IMCR5A */ + { KEYSC_KEY, DMAC_2_DADERR, DMAC_2_DEI5, DMAC_2_DEI4, + SCIFA3, SCIFA2, SCIFA1, SCIFA0 } }, + { 0xe6940098, 0xe69400d8, 8, /* IMR6A / IMCR6A */ + { SCIFB, SCIFA5, SCIFA4, MSIOF1, + 0, 0, MSIOF2, 0 } }, + { 0xe694009c, 0xe69400dc, 8, /* IMR7A / IMCR7A */ + { SDHI0_SDHI0I3, SDHI0_SDHI0I2, SDHI0_SDHI0I1, SDHI0_SDHI0I0, + FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLTENDI, FLCTL_FLSTEI } }, + { 0xe69400a0, 0xe69400e0, 8, /* IMR8A / IMCR8A */ + { SDHI1_SDHI1I3, SDHI1_SDHI1I2, SDHI1_SDHI1I1, SDHI1_SDHI1I0, + TTI20, USBDMAC_USHDMI, SPU, SIU } }, + { 0xe69400a4, 0xe69400e4, 8, /* IMR9A / IMCR9A */ + { CMT1_CMT13, CMT1_CMT12, CMT1_CMT11, CMT1_CMT10, + CMT2, USBHS_USHI1, USBHS_USHI0, 0 } }, + { 0xe69400a8, 0xe69400e8, 8, /* IMR10A / IMCR10A */ + { 0, DMAC2_2_DADERR, DMAC2_2_DEI5, DMAC2_2_DEI4, + 0, 0, 0, 0 } }, + { 0xe69400ac, 0xe69400ec, 8, /* IMR11A / IMCR11A */ + { IIC1_DTEI1, IIC1_WAITI1, IIC1_TACKI1, IIC1_ALI1, + LCRC, MSU_MSU2, IREM, MSU_MSU } }, + { 0xe69400b0, 0xe69400f0, 8, /* IMR12A / IMCR12A */ + { 0, 0, TPU0, TPU1, + TPU2, TPU3, TPU4, 0 } }, + { 0xe69400b4, 0xe69400f4, 8, /* IMR13A / IMCR13A */ + { SDHI2_SDHI2I3, SDHI2_SDHI2I2, SDHI2_SDHI2I1, SDHI2_SDHI2I0, + MISTY, CMT3, RWDT1, RWDT0 } }, +}; + +static struct intc_prio_reg intca_prio_registers[] = { + { 0xe6900010, 0, 32, 4, /* INTPRI00A */ + { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } }, + { 0xe6900014, 0, 32, 4, /* INTPRI10A */ + { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } }, + + { 0xe6940000, 0, 16, 4, /* IPRAA */ { DMAC3_1, DMAC3_2, CMT2, LCRC } }, + { 0xe6940004, 0, 16, 4, /* IPRBA */ { IRDA, ETM11, BBIF1, BBIF2 } }, + { 0xe6940008, 0, 16, 4, /* IPRCA */ { CRYPT1_ERR, CRYPT2_STD, + CMT1_CMT11, ARM11 } }, + { 0xe694000c, 0, 16, 4, /* IPRDA */ { PINT1, PINT2, + CMT1_CMT12, TPU4 } }, + { 0xe6940010, 0, 16, 4, /* IPREA */ { DMAC_1, MFI_MFIS, + MFI_MFIM, USBHS } }, + { 0xe6940014, 0, 16, 4, /* IPRFA */ { KEYSC_KEY, DMAC_2, + 0, CMT1_CMT10 } }, + { 0xe6940018, 0, 16, 4, /* IPRGA */ { SCIFA0, SCIFA1, + SCIFA2, SCIFA3 } }, + { 0xe694001c, 0, 16, 4, /* IPRGH */ { MSIOF2, USBDMAC_USHDMI, + FLCTL, SDHI0 } }, + { 0xe6940020, 0, 16, 4, /* IPRIA */ { MSIOF1, SCIFA4, MSU_MSU, IIC1 } }, + { 0xe6940024, 0, 16, 4, /* IPRJA */ { DMAC2_1, DMAC2_2, SIU, TTI20 } }, + { 0xe6940028, 0, 16, 4, /* IPRKA */ { 0, CMT1_CMT13, IREM, SDHI1 } }, + { 0xe694002c, 0, 16, 4, /* IPRLA */ { TPU0, TPU1, TPU2, TPU3 } }, + { 0xe6940030, 0, 16, 4, /* IPRMA */ { MISTY, CMT3, RWDT1, RWDT0 } }, + { 0xe6940034, 0, 16, 4, /* IPRNA */ { SCIFB, SCIFA5, SPU, DDM } }, + { 0xe6940038, 0, 16, 4, /* IPROA */ { 0, 0, DIRC, SDHI2 } }, +}; + +static struct intc_sense_reg intca_sense_registers[] __initdata = { + { 0xe6900000, 16, 2, /* ICR1A */ + { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } }, + { 0xe6900004, 16, 2, /* ICR2A */ + { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } }, +}; + +static struct intc_mask_reg intca_ack_registers[] __initdata = { + { 0xe6900020, 0, 8, /* INTREQ00A */ + { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } }, + { 0xe6900024, 0, 8, /* INTREQ10A */ + { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } }, +}; + +static DECLARE_INTC_DESC_ACK(intca_desc, "sh7367-intca", + intca_vectors, intca_groups, + intca_mask_registers, intca_prio_registers, + intca_sense_registers, intca_ack_registers); + +void __init sh7367_init_irq(void) +{ + /* INTCA */ + register_intc_controller(&intca_desc); +} diff --git a/arch/arm/mach-shmobile/intc-sh7372.c b/arch/arm/mach-shmobile/intc-sh7372.c new file mode 100644 index 00000000000..c57a923f97a --- /dev/null +++ b/arch/arm/mach-shmobile/intc-sh7372.c @@ -0,0 +1,369 @@ +/* + * sh7372 processor support - INTC hardware block + * + * Copyright (C) 2010 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <linux/sh_intc.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +enum { + UNUSED_INTCA = 0, + + /* interrupt sources INTCA */ + IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A, + IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A, + IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A, + IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A, + DIRC, + CRYPT_STD, + IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1, + AP_ARM_IRQPMU, AP_ARM_COMMTX, AP_ARM_COMMRX, + MFI_MFIM, MFI_MFIS, + BBIF1, BBIF2, + USBHSDMAC0_USHDMI, + _3DG_SGX540, + CMT1_CMT10, CMT1_CMT11, CMT1_CMT12, CMT1_CMT13, CMT2, CMT3, + KEYSC_KEY, + SCIFA0, SCIFA1, SCIFA2, SCIFA3, + MSIOF2, MSIOF1, + SCIFA4, SCIFA5, SCIFB, + FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I, + SDHI0_SDHI0I0, SDHI0_SDHI0I1, SDHI0_SDHI0I2, SDHI0_SDHI0I3, + SDHI1_SDHI1I0, SDHI1_SDHI1I1, SDHI1_SDHI1I2, + IRREM, + IRDA, + TPU0, + TTI20, + DDM, + SDHI2_SDHI2I0, SDHI2_SDHI2I1, SDHI2_SDHI2I2, SDHI2_SDHI2I3, + RWDT0, + DMAC1_1_DEI0, DMAC1_1_DEI1, DMAC1_1_DEI2, DMAC1_1_DEI3, + DMAC1_2_DEI4, DMAC1_2_DEI5, DMAC1_2_DADERR, + DMAC2_1_DEI0, DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3, + DMAC2_2_DEI4, DMAC2_2_DEI5, DMAC2_2_DADERR, + DMAC3_1_DEI0, DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3, + DMAC3_2_DEI4, DMAC3_2_DEI5, DMAC3_2_DADERR, + SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM, + HDMI, + SPU2_SPU0, SPU2_SPU1, + FSI, FMSI, + MIPI_HSI, + IPMMU_IPMMUD, + CEC_1, CEC_2, + AP_ARM_CTIIRQ, AP_ARM_DMAEXTERRIRQ, AP_ARM_DMAIRQ, AP_ARM_DMASIRQ, + MFIS2, + CPORTR2S, + CMT14, CMT15, + MMC_MMC_ERR, MMC_MMC_NOR, + IIC4_ALI4, IIC4_TACKI4, IIC4_WAITI4, IIC4_DTEI4, + IIC3_ALI3, IIC3_TACKI3, IIC3_WAITI3, IIC3_DTEI3, + USB0_USB0I1, USB0_USB0I0, + USB1_USB1I1, USB1_USB1I0, + USBHSDMAC1_USHDMI, + + /* interrupt groups INTCA */ + DMAC1_1, DMAC1_2, DMAC2_1, DMAC2_2, DMAC3_1, DMAC3_2, SHWYSTAT, + AP_ARM1, AP_ARM2, SPU2, FLCTL, IIC1, SDHI0, SDHI1, SDHI2 +}; + +static struct intc_vect intca_vectors[] __initdata = { + INTC_VECT(IRQ0A, 0x0200), INTC_VECT(IRQ1A, 0x0220), + INTC_VECT(IRQ2A, 0x0240), INTC_VECT(IRQ3A, 0x0260), + INTC_VECT(IRQ4A, 0x0280), INTC_VECT(IRQ5A, 0x02a0), + INTC_VECT(IRQ6A, 0x02c0), INTC_VECT(IRQ7A, 0x02e0), + INTC_VECT(IRQ8A, 0x0300), INTC_VECT(IRQ9A, 0x0320), + INTC_VECT(IRQ10A, 0x0340), INTC_VECT(IRQ11A, 0x0360), + INTC_VECT(IRQ12A, 0x0380), INTC_VECT(IRQ13A, 0x03a0), + INTC_VECT(IRQ14A, 0x03c0), INTC_VECT(IRQ15A, 0x03e0), + INTC_VECT(IRQ16A, 0x3200), INTC_VECT(IRQ17A, 0x3220), + INTC_VECT(IRQ18A, 0x3240), INTC_VECT(IRQ19A, 0x3260), + INTC_VECT(IRQ20A, 0x3280), INTC_VECT(IRQ31A, 0x32a0), + INTC_VECT(IRQ22A, 0x32c0), INTC_VECT(IRQ23A, 0x32e0), + INTC_VECT(IRQ24A, 0x3300), INTC_VECT(IRQ25A, 0x3320), + INTC_VECT(IRQ26A, 0x3340), INTC_VECT(IRQ27A, 0x3360), + INTC_VECT(IRQ28A, 0x3380), INTC_VECT(IRQ29A, 0x33a0), + INTC_VECT(IRQ30A, 0x33c0), INTC_VECT(IRQ31A, 0x33e0), + INTC_VECT(DIRC, 0x0560), + INTC_VECT(CRYPT_STD, 0x0700), + INTC_VECT(IIC1_ALI1, 0x0780), INTC_VECT(IIC1_TACKI1, 0x07a0), + INTC_VECT(IIC1_WAITI1, 0x07c0), INTC_VECT(IIC1_DTEI1, 0x07e0), + INTC_VECT(AP_ARM_IRQPMU, 0x0800), INTC_VECT(AP_ARM_COMMTX, 0x0840), + INTC_VECT(AP_ARM_COMMRX, 0x0860), + INTC_VECT(MFI_MFIM, 0x0900), INTC_VECT(MFI_MFIS, 0x0920), + INTC_VECT(BBIF1, 0x0940), INTC_VECT(BBIF2, 0x0960), + INTC_VECT(USBHSDMAC0_USHDMI, 0x0a00), + INTC_VECT(_3DG_SGX540, 0x0a60), + INTC_VECT(CMT1_CMT10, 0x0b00), INTC_VECT(CMT1_CMT11, 0x0b20), + INTC_VECT(CMT1_CMT12, 0x0b40), INTC_VECT(CMT1_CMT13, 0x0b60), + INTC_VECT(CMT2, 0x0b80), INTC_VECT(CMT3, 0x0ba0), + INTC_VECT(KEYSC_KEY, 0x0be0), + INTC_VECT(SCIFA0, 0x0c00), INTC_VECT(SCIFA1, 0x0c20), + INTC_VECT(SCIFA2, 0x0c40), INTC_VECT(SCIFA3, 0x0c60), + INTC_VECT(MSIOF2, 0x0c80), INTC_VECT(MSIOF1, 0x0d00), + INTC_VECT(SCIFA4, 0x0d20), INTC_VECT(SCIFA5, 0x0d40), + INTC_VECT(SCIFB, 0x0d60), + INTC_VECT(FLCTL_FLSTEI, 0x0d80), INTC_VECT(FLCTL_FLTENDI, 0x0da0), + INTC_VECT(FLCTL_FLTREQ0I, 0x0dc0), INTC_VECT(FLCTL_FLTREQ1I, 0x0de0), + INTC_VECT(SDHI0_SDHI0I0, 0x0e00), INTC_VECT(SDHI0_SDHI0I1, 0x0e20), + INTC_VECT(SDHI0_SDHI0I2, 0x0e40), INTC_VECT(SDHI0_SDHI0I3, 0x0e60), + INTC_VECT(SDHI1_SDHI1I0, 0x0e80), INTC_VECT(SDHI1_SDHI1I1, 0x0ea0), + INTC_VECT(SDHI1_SDHI1I2, 0x0ec0), + INTC_VECT(IRREM, 0x0f60), + INTC_VECT(IRDA, 0x0480), + INTC_VECT(TPU0, 0x04a0), + INTC_VECT(TTI20, 0x1100), + INTC_VECT(DDM, 0x1140), + INTC_VECT(SDHI2_SDHI2I0, 0x1200), INTC_VECT(SDHI2_SDHI2I1, 0x1220), + INTC_VECT(SDHI2_SDHI2I2, 0x1240), INTC_VECT(SDHI2_SDHI2I3, 0x1260), + INTC_VECT(RWDT0, 0x1280), + INTC_VECT(DMAC1_1_DEI0, 0x2000), INTC_VECT(DMAC1_1_DEI1, 0x2020), + INTC_VECT(DMAC1_1_DEI2, 0x2040), INTC_VECT(DMAC1_1_DEI3, 0x2060), + INTC_VECT(DMAC1_2_DEI4, 0x2080), INTC_VECT(DMAC1_2_DEI5, 0x20a0), + INTC_VECT(DMAC1_2_DADERR, 0x20c0), + INTC_VECT(DMAC2_1_DEI0, 0x2100), INTC_VECT(DMAC2_1_DEI1, 0x2120), + INTC_VECT(DMAC2_1_DEI2, 0x2140), INTC_VECT(DMAC2_1_DEI3, 0x2160), + INTC_VECT(DMAC2_2_DEI4, 0x2180), INTC_VECT(DMAC2_2_DEI5, 0x21a0), + INTC_VECT(DMAC2_2_DADERR, 0x21c0), + INTC_VECT(DMAC3_1_DEI0, 0x2200), INTC_VECT(DMAC3_1_DEI1, 0x2220), + INTC_VECT(DMAC3_1_DEI2, 0x2240), INTC_VECT(DMAC3_1_DEI3, 0x2260), + INTC_VECT(DMAC3_2_DEI4, 0x2280), INTC_VECT(DMAC3_2_DEI5, 0x22a0), + INTC_VECT(DMAC3_2_DADERR, 0x22c0), + INTC_VECT(SHWYSTAT_RT, 0x1300), INTC_VECT(SHWYSTAT_HS, 0x1320), + INTC_VECT(SHWYSTAT_COM, 0x1340), + INTC_VECT(HDMI, 0x17e0), + INTC_VECT(SPU2_SPU0, 0x1800), INTC_VECT(SPU2_SPU1, 0x1820), + INTC_VECT(FSI, 0x1840), + INTC_VECT(FMSI, 0x1860), + INTC_VECT(MIPI_HSI, 0x18e0), + INTC_VECT(IPMMU_IPMMUD, 0x1920), + INTC_VECT(CEC_1, 0x1940), INTC_VECT(CEC_2, 0x1960), + INTC_VECT(AP_ARM_CTIIRQ, 0x1980), + INTC_VECT(AP_ARM_DMAEXTERRIRQ, 0x19a0), + INTC_VECT(AP_ARM_DMAIRQ, 0x19c0), + INTC_VECT(AP_ARM_DMASIRQ, 0x19e0), + INTC_VECT(MFIS2, 0x1a00), + INTC_VECT(CPORTR2S, 0x1a20), + INTC_VECT(CMT14, 0x1a40), INTC_VECT(CMT15, 0x1a60), + INTC_VECT(MMC_MMC_ERR, 0x1ac0), INTC_VECT(MMC_MMC_NOR, 0x1ae0), + INTC_VECT(IIC4_ALI4, 0x1b00), INTC_VECT(IIC4_TACKI4, 0x1b20), + INTC_VECT(IIC4_WAITI4, 0x1b40), INTC_VECT(IIC4_DTEI4, 0x1b60), + INTC_VECT(IIC3_ALI3, 0x1b80), INTC_VECT(IIC3_TACKI3, 0x1ba0), + INTC_VECT(IIC3_WAITI3, 0x1bc0), INTC_VECT(IIC3_DTEI3, 0x1be0), + INTC_VECT(USB0_USB0I1, 0x1c80), INTC_VECT(USB0_USB0I0, 0x1ca0), + INTC_VECT(USB1_USB1I1, 0x1cc0), INTC_VECT(USB1_USB1I0, 0x1ce0), + INTC_VECT(USBHSDMAC1_USHDMI, 0x1d00), +}; + +static struct intc_group intca_groups[] __initdata = { + INTC_GROUP(DMAC1_1, DMAC1_1_DEI0, + DMAC1_1_DEI1, DMAC1_1_DEI2, DMAC1_1_DEI3), + INTC_GROUP(DMAC1_2, DMAC1_2_DEI4, + DMAC1_2_DEI5, DMAC1_2_DADERR), + INTC_GROUP(DMAC2_1, DMAC2_1_DEI0, + DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3), + INTC_GROUP(DMAC2_2, DMAC2_2_DEI4, + DMAC2_2_DEI5, DMAC2_2_DADERR), + INTC_GROUP(DMAC3_1, DMAC3_1_DEI0, + DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3), + INTC_GROUP(DMAC3_2, DMAC3_2_DEI4, + DMAC3_2_DEI5, DMAC3_2_DADERR), + INTC_GROUP(AP_ARM1, AP_ARM_IRQPMU, AP_ARM_COMMTX, AP_ARM_COMMRX), + INTC_GROUP(AP_ARM2, AP_ARM_CTIIRQ, AP_ARM_DMAEXTERRIRQ, + AP_ARM_DMAIRQ, AP_ARM_DMASIRQ), + INTC_GROUP(SPU2, SPU2_SPU0, SPU2_SPU1), + INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLTENDI, + FLCTL_FLTREQ0I, FLCTL_FLTREQ1I), + INTC_GROUP(IIC1, IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1), + INTC_GROUP(SDHI0, SDHI0_SDHI0I0, SDHI0_SDHI0I1, + SDHI0_SDHI0I2, SDHI0_SDHI0I3), + INTC_GROUP(SDHI1, SDHI1_SDHI1I0, SDHI1_SDHI1I1, + SDHI1_SDHI1I2), + INTC_GROUP(SDHI2, SDHI2_SDHI2I0, SDHI2_SDHI2I1, + SDHI2_SDHI2I2, SDHI2_SDHI2I3), + INTC_GROUP(SHWYSTAT, SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM), +}; + +static struct intc_mask_reg intca_mask_registers[] __initdata = { + { 0xe6900040, 0xe6900060, 8, /* INTMSK00A / INTMSKCLR00A */ + { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } }, + { 0xe6900044, 0xe6900064, 8, /* INTMSK10A / INTMSKCLR10A */ + { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } }, + { 0xe6900048, 0xe6900068, 8, /* INTMSK20A / INTMSKCLR20A */ + { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } }, + { 0xe690004c, 0xe690006c, 8, /* INTMSK30A / INTMSKCLR30A */ + { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } }, + + { 0xe6940080, 0xe69400c0, 8, /* IMR0A / IMCR0A */ + { DMAC2_1_DEI3, DMAC2_1_DEI2, DMAC2_1_DEI1, DMAC2_1_DEI0, + AP_ARM_IRQPMU, 0, AP_ARM_COMMTX, AP_ARM_COMMRX } }, + { 0xe6940084, 0xe69400c4, 8, /* IMR1A / IMCR1A */ + { 0, CRYPT_STD, DIRC, 0, + DMAC1_1_DEI3, DMAC1_1_DEI2, DMAC1_1_DEI1, DMAC1_1_DEI0 } }, + { 0xe6940088, 0xe69400c8, 8, /* IMR2A / IMCR2A */ + { 0, 0, 0, 0, + BBIF1, BBIF2, MFI_MFIS, MFI_MFIM } }, + { 0xe694008c, 0xe69400cc, 8, /* IMR3A / IMCR3A */ + { DMAC3_1_DEI3, DMAC3_1_DEI2, DMAC3_1_DEI1, DMAC3_1_DEI0, + DMAC3_2_DADERR, DMAC3_2_DEI5, DMAC3_2_DEI4, IRDA } }, + { 0xe6940090, 0xe69400d0, 8, /* IMR4A / IMCR4A */ + { DDM, 0, 0, 0, + 0, 0, 0, 0 } }, + { 0xe6940094, 0xe69400d4, 8, /* IMR5A / IMCR5A */ + { KEYSC_KEY, DMAC1_2_DADERR, DMAC1_2_DEI5, DMAC1_2_DEI4, + SCIFA3, SCIFA2, SCIFA1, SCIFA0 } }, + { 0xe6940098, 0xe69400d8, 8, /* IMR6A / IMCR6A */ + { SCIFB, SCIFA5, SCIFA4, MSIOF1, + 0, 0, MSIOF2, 0 } }, + { 0xe694009c, 0xe69400dc, 8, /* IMR7A / IMCR7A */ + { SDHI0_SDHI0I3, SDHI0_SDHI0I2, SDHI0_SDHI0I1, SDHI0_SDHI0I0, + FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLTENDI, FLCTL_FLSTEI } }, + { 0xe69400a0, 0xe69400e0, 8, /* IMR8A / IMCR8A */ + { 0, SDHI1_SDHI1I2, SDHI1_SDHI1I1, SDHI1_SDHI1I0, + TTI20, USBHSDMAC0_USHDMI, 0, 0 } }, + { 0xe69400a4, 0xe69400e4, 8, /* IMR9A / IMCR9A */ + { CMT1_CMT13, CMT1_CMT12, CMT1_CMT11, CMT1_CMT10, + CMT2, 0, 0, _3DG_SGX540 } }, + { 0xe69400a8, 0xe69400e8, 8, /* IMR10A / IMCR10A */ + { 0, DMAC2_2_DADERR, DMAC2_2_DEI5, DMAC2_2_DEI4, + 0, 0, 0, 0 } }, + { 0xe69400ac, 0xe69400ec, 8, /* IMR11A / IMCR11A */ + { IIC1_DTEI1, IIC1_WAITI1, IIC1_TACKI1, IIC1_ALI1, + 0, 0, IRREM, 0 } }, + { 0xe69400b0, 0xe69400f0, 8, /* IMR12A / IMCR12A */ + { 0, 0, TPU0, 0, + 0, 0, 0, 0 } }, + { 0xe69400b4, 0xe69400f4, 8, /* IMR13A / IMCR13A */ + { SDHI2_SDHI2I3, SDHI2_SDHI2I2, SDHI2_SDHI2I1, SDHI2_SDHI2I0, + 0, CMT3, 0, RWDT0 } }, + { 0xe6950080, 0xe69500c0, 8, /* IMR0A3 / IMCR0A3 */ + { SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM, 0, + 0, 0, 0, 0 } }, + { 0xe6950090, 0xe69500d0, 8, /* IMR4A3 / IMCR4A3 */ + { 0, 0, 0, 0, + 0, 0, 0, HDMI } }, + { 0xe6950094, 0xe69500d4, 8, /* IMR5A3 / IMCR5A3 */ + { SPU2_SPU0, SPU2_SPU1, FSI, FMSI, + 0, 0, 0, MIPI_HSI } }, + { 0xe6950098, 0xe69500d8, 8, /* IMR6A3 / IMCR6A3 */ + { 0, IPMMU_IPMMUD, CEC_1, CEC_2, + AP_ARM_CTIIRQ, AP_ARM_DMAEXTERRIRQ, + AP_ARM_DMAIRQ, AP_ARM_DMASIRQ } }, + { 0xe695009c, 0xe69500dc, 8, /* IMR7A3 / IMCR7A3 */ + { MFIS2, CPORTR2S, CMT14, CMT15, + 0, 0, MMC_MMC_ERR, MMC_MMC_NOR } }, + { 0xe69500a0, 0xe69500e0, 8, /* IMR8A3 / IMCR8A3 */ + { IIC4_ALI4, IIC4_TACKI4, IIC4_WAITI4, IIC4_DTEI4, + IIC3_ALI3, IIC3_TACKI3, IIC3_WAITI3, IIC3_DTEI3 } }, + { 0xe69500a4, 0xe69500e4, 8, /* IMR9A3 / IMCR9A3 */ + { 0, 0, 0, 0, + USB0_USB0I1, USB0_USB0I0, USB1_USB1I1, USB1_USB1I0 } }, + { 0xe69500a8, 0xe69500e8, 8, /* IMR10A3 / IMCR10A3 */ + { USBHSDMAC1_USHDMI, 0, 0, 0, + 0, 0, 0, 0 } }, +}; + +static struct intc_prio_reg intca_prio_registers[] __initdata = { + { 0xe6900010, 0, 32, 4, /* INTPRI00A */ + { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } }, + { 0xe6900014, 0, 32, 4, /* INTPRI10A */ + { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } }, + { 0xe6900018, 0, 32, 4, /* INTPRI20A */ + { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } }, + { 0xe690001c, 0, 32, 4, /* INTPRI30A */ + { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } }, + + { 0xe6940000, 0, 16, 4, /* IPRAA */ { DMAC3_1, DMAC3_2, CMT2, 0 } }, + { 0xe6940004, 0, 16, 4, /* IPRBA */ { IRDA, 0, BBIF1, BBIF2 } }, + { 0xe6940008, 0, 16, 4, /* IPRCA */ { 0, CRYPT_STD, + CMT1_CMT11, AP_ARM1 } }, + { 0xe694000c, 0, 16, 4, /* IPRDA */ { 0, 0, + CMT1_CMT12, 0 } }, + { 0xe6940010, 0, 16, 4, /* IPREA */ { DMAC1_1, MFI_MFIS, + MFI_MFIM, 0 } }, + { 0xe6940014, 0, 16, 4, /* IPRFA */ { KEYSC_KEY, DMAC1_2, + _3DG_SGX540, CMT1_CMT10 } }, + { 0xe6940018, 0, 16, 4, /* IPRGA */ { SCIFA0, SCIFA1, + SCIFA2, SCIFA3 } }, + { 0xe694001c, 0, 16, 4, /* IPRGH */ { MSIOF2, USBHSDMAC0_USHDMI, + FLCTL, SDHI0 } }, + { 0xe6940020, 0, 16, 4, /* IPRIA */ { MSIOF1, SCIFA4, + 0/* MSU */, IIC1 } }, + { 0xe6940024, 0, 16, 4, /* IPRJA */ { DMAC2_1, DMAC2_2, + 0/* MSUG */, TTI20 } }, + { 0xe6940028, 0, 16, 4, /* IPRKA */ { 0, CMT1_CMT13, IRREM, SDHI1 } }, + { 0xe694002c, 0, 16, 4, /* IPRLA */ { TPU0, 0, 0, 0 } }, + { 0xe6940030, 0, 16, 4, /* IPRMA */ { 0, CMT3, 0, RWDT0 } }, + { 0xe6940034, 0, 16, 4, /* IPRNA */ { SCIFB, SCIFA5, 0, DDM } }, + { 0xe6940038, 0, 16, 4, /* IPROA */ { 0, 0, DIRC, SDHI2 } }, + { 0xe6950000, 0, 16, 4, /* IPRAA3 */ { SHWYSTAT, 0, 0, 0 } }, + { 0xe6950024, 0, 16, 4, /* IPRJA3 */ { 0, 0, 0, HDMI } }, + { 0xe6950028, 0, 16, 4, /* IPRKA3 */ { SPU2, 0, FSI, FMSI } }, + { 0xe695002c, 0, 16, 4, /* IPRLA3 */ { 0, 0, 0, MIPI_HSI } }, + { 0xe6950030, 0, 16, 4, /* IPRMA3 */ { IPMMU_IPMMUD, 0, + CEC_1, CEC_2 } }, + { 0xe6950034, 0, 16, 4, /* IPRNA3 */ { AP_ARM2, 0, 0, 0 } }, + { 0xe6950038, 0, 16, 4, /* IPROA3 */ { MFIS2, CPORTR2S, + CMT14, CMT15 } }, + { 0xe694003c, 0, 16, 4, /* IPRPA3 */ { 0, 0, + MMC_MMC_ERR, MMC_MMC_NOR } }, + { 0xe6940040, 0, 16, 4, /* IPRQA3 */ { IIC4_ALI4, IIC4_TACKI4, + IIC4_WAITI4, IIC4_DTEI4 } }, + { 0xe6940044, 0, 16, 4, /* IPRRA3 */ { IIC3_ALI3, IIC3_TACKI3, + IIC3_WAITI3, IIC3_DTEI3 } }, + { 0xe6940048, 0, 16, 4, /* IPRSA3 */ { 0/*ERI*/, 0/*RXI*/, + 0/*TXI*/, 0/*TEI*/} }, + { 0xe694004c, 0, 16, 4, /* IPRTA3 */ { USB0_USB0I1, USB0_USB0I0, + USB1_USB1I1, USB1_USB1I0 } }, + { 0xe6940050, 0, 16, 4, /* IPRUA3 */ { USBHSDMAC1_USHDMI, 0, 0, 0 } }, +}; + +static struct intc_sense_reg intca_sense_registers[] __initdata = { + { 0xe6900000, 32, 4, /* ICR1A */ + { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } }, + { 0xe6900004, 32, 4, /* ICR2A */ + { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } }, + { 0xe6900008, 32, 4, /* ICR3A */ + { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } }, + { 0xe690000c, 32, 4, /* ICR4A */ + { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } }, +}; + +static struct intc_mask_reg intca_ack_registers[] __initdata = { + { 0xe6900020, 0, 8, /* INTREQ00A */ + { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } }, + { 0xe6900024, 0, 8, /* INTREQ10A */ + { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } }, + { 0xe6900028, 0, 8, /* INTREQ20A */ + { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } }, + { 0xe690002c, 0, 8, /* INTREQ30A */ + { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } }, +}; + +static DECLARE_INTC_DESC_ACK(intca_desc, "sh7372-intca", + intca_vectors, intca_groups, + intca_mask_registers, intca_prio_registers, + intca_sense_registers, intca_ack_registers); + +void __init sh7372_init_irq(void) +{ + register_intc_controller(&intca_desc); +} diff --git a/arch/arm/mach-shmobile/intc-sh7377.c b/arch/arm/mach-shmobile/intc-sh7377.c new file mode 100644 index 00000000000..125021cfba5 --- /dev/null +++ b/arch/arm/mach-shmobile/intc-sh7377.c @@ -0,0 +1,350 @@ +/* + * sh7377 processor support - INTC hardware block + * + * Copyright (C) 2010 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <linux/sh_intc.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +enum { + UNUSED_INTCA = 0, + + /* interrupt sources INTCA */ + IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A, + IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A, + IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A, + IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A, + DIRC, + _2DG, + CRYPT_STD, + IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1, + AP_ARM_IRQPMU, AP_ARM_COMMTX, AP_ARM_COMMRX, + MFI_MFIM, MFI_MFIS, + BBIF1, BBIF2, + USBDMAC_USHDMI, + USBHS_USHI0, USBHS_USHI1, + _3DG_SGX540, + CMT1_CMT10, CMT1_CMT11, CMT1_CMT12, CMT1_CMT13, CMT2, CMT3, + KEYSC_KEY, + SCIFA0, SCIFA1, SCIFA2, SCIFA3, + MSIOF2, MSIOF1, + SCIFA4, SCIFA5, SCIFB, + FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I, + SDHI0_SDHI0I0, SDHI0_SDHI0I1, SDHI0_SDHI0I2, SDHI0_SDHI0I3, + SDHI1_SDHI1I0, SDHI1_SDHI1I1, SDHI1_SDHI1I2, SDHI1_SDHI1I3, + MSU_MSU, MSU_MSU2, + IRREM, + MSUG, + IRDA, + TPU0, TPU1, TPU2, TPU3, TPU4, + LCRC, + PINTCA_PINT1, PINTCA_PINT2, + TTI20, + MISTY, + DDM, + RWDT0, RWDT1, + DMAC_1_DEI0, DMAC_1_DEI1, DMAC_1_DEI2, DMAC_1_DEI3, + DMAC_2_DEI4, DMAC_2_DEI5, DMAC_2_DADERR, + DMAC2_1_DEI0, DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3, + DMAC2_2_DEI4, DMAC2_2_DEI5, DMAC2_2_DADERR, + DMAC3_1_DEI0, DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3, + DMAC3_2_DEI4, DMAC3_2_DEI5, DMAC3_2_DADERR, + SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM, + ICUSB_ICUSB0, ICUSB_ICUSB1, + ICUDMC_ICUDMC1, ICUDMC_ICUDMC2, + SPU2_SPU0, SPU2_SPU1, + FSI, + FMSI, + SCUV, + IPMMU_IPMMUB, + AP_ARM_CTIIRQ, AP_ARM_DMAEXTERRIRQ, AP_ARM_DMAIRQ, AP_ARM_DMASIRQ, + MFIS2, + CPORTR2S, + CMT14, CMT15, + SCIFA6, + + /* interrupt groups INTCA */ + DMAC_1, DMAC_2, DMAC2_1, DMAC2_2, DMAC3_1, DMAC3_2, SHWYSTAT, + AP_ARM1, AP_ARM2, USBHS, SPU2, FLCTL, IIC1, SDHI0, SDHI1, + ICUSB, ICUDMC +}; + +static struct intc_vect intca_vectors[] = { + INTC_VECT(IRQ0A, 0x0200), INTC_VECT(IRQ1A, 0x0220), + INTC_VECT(IRQ2A, 0x0240), INTC_VECT(IRQ3A, 0x0260), + INTC_VECT(IRQ4A, 0x0280), INTC_VECT(IRQ5A, 0x02a0), + INTC_VECT(IRQ6A, 0x02c0), INTC_VECT(IRQ7A, 0x02e0), + INTC_VECT(IRQ8A, 0x0300), INTC_VECT(IRQ9A, 0x0320), + INTC_VECT(IRQ10A, 0x0340), INTC_VECT(IRQ11A, 0x0360), + INTC_VECT(IRQ12A, 0x0380), INTC_VECT(IRQ13A, 0x03a0), + INTC_VECT(IRQ14A, 0x03c0), INTC_VECT(IRQ15A, 0x03e0), + INTC_VECT(IRQ16A, 0x3200), INTC_VECT(IRQ17A, 0x3220), + INTC_VECT(IRQ18A, 0x3240), INTC_VECT(IRQ19A, 0x3260), + INTC_VECT(IRQ20A, 0x3280), INTC_VECT(IRQ31A, 0x32a0), + INTC_VECT(IRQ22A, 0x32c0), INTC_VECT(IRQ23A, 0x32e0), + INTC_VECT(IRQ24A, 0x3300), INTC_VECT(IRQ25A, 0x3320), + INTC_VECT(IRQ26A, 0x3340), INTC_VECT(IRQ27A, 0x3360), + INTC_VECT(IRQ28A, 0x3380), INTC_VECT(IRQ29A, 0x33a0), + INTC_VECT(IRQ30A, 0x33c0), INTC_VECT(IRQ31A, 0x33e0), + INTC_VECT(DIRC, 0x0560), + INTC_VECT(_2DG, 0x05e0), + INTC_VECT(CRYPT_STD, 0x0700), + INTC_VECT(IIC1_ALI1, 0x0780), INTC_VECT(IIC1_TACKI1, 0x07a0), + INTC_VECT(IIC1_WAITI1, 0x07c0), INTC_VECT(IIC1_DTEI1, 0x07e0), + INTC_VECT(AP_ARM_IRQPMU, 0x0800), INTC_VECT(AP_ARM_COMMTX, 0x0840), + INTC_VECT(AP_ARM_COMMRX, 0x0860), + INTC_VECT(MFI_MFIM, 0x0900), INTC_VECT(MFI_MFIS, 0x0920), + INTC_VECT(BBIF1, 0x0940), INTC_VECT(BBIF2, 0x0960), + INTC_VECT(USBDMAC_USHDMI, 0x0a00), + INTC_VECT(USBHS_USHI0, 0x0a20), INTC_VECT(USBHS_USHI1, 0x0a40), + INTC_VECT(_3DG_SGX540, 0x0a60), + INTC_VECT(CMT1_CMT10, 0x0b00), INTC_VECT(CMT1_CMT11, 0x0b20), + INTC_VECT(CMT1_CMT12, 0x0b40), INTC_VECT(CMT1_CMT13, 0x0b60), + INTC_VECT(CMT2, 0x0b80), INTC_VECT(CMT3, 0x0ba0), + INTC_VECT(KEYSC_KEY, 0x0be0), + INTC_VECT(SCIFA0, 0x0c00), INTC_VECT(SCIFA1, 0x0c20), + INTC_VECT(SCIFA2, 0x0c40), INTC_VECT(SCIFA3, 0x0c60), + INTC_VECT(MSIOF2, 0x0c80), INTC_VECT(MSIOF1, 0x0d00), + INTC_VECT(SCIFA4, 0x0d20), INTC_VECT(SCIFA5, 0x0d40), + INTC_VECT(SCIFB, 0x0d60), + INTC_VECT(FLCTL_FLSTEI, 0x0d80), INTC_VECT(FLCTL_FLTENDI, 0x0da0), + INTC_VECT(FLCTL_FLTREQ0I, 0x0dc0), INTC_VECT(FLCTL_FLTREQ1I, 0x0de0), + INTC_VECT(SDHI0_SDHI0I0, 0x0e00), INTC_VECT(SDHI0_SDHI0I1, 0x0e20), + INTC_VECT(SDHI0_SDHI0I2, 0x0e40), INTC_VECT(SDHI0_SDHI0I3, 0x0e60), + INTC_VECT(SDHI1_SDHI1I0, 0x0e80), INTC_VECT(SDHI1_SDHI1I1, 0x0ea0), + INTC_VECT(SDHI1_SDHI1I2, 0x0ec0), INTC_VECT(SDHI1_SDHI1I3, 0x0ee0), + INTC_VECT(MSU_MSU, 0x0f20), INTC_VECT(MSU_MSU2, 0x0f40), + INTC_VECT(IRREM, 0x0f60), + INTC_VECT(MSUG, 0x0fa0), + INTC_VECT(IRDA, 0x0480), + INTC_VECT(TPU0, 0x04a0), INTC_VECT(TPU1, 0x04c0), + INTC_VECT(TPU2, 0x04e0), INTC_VECT(TPU3, 0x0500), + INTC_VECT(TPU4, 0x0520), + INTC_VECT(LCRC, 0x0540), + INTC_VECT(PINTCA_PINT1, 0x1000), INTC_VECT(PINTCA_PINT2, 0x1020), + INTC_VECT(TTI20, 0x1100), + INTC_VECT(MISTY, 0x1120), + INTC_VECT(DDM, 0x1140), + INTC_VECT(RWDT0, 0x1280), INTC_VECT(RWDT1, 0x12a0), + INTC_VECT(DMAC_1_DEI0, 0x2000), INTC_VECT(DMAC_1_DEI1, 0x2020), + INTC_VECT(DMAC_1_DEI2, 0x2040), INTC_VECT(DMAC_1_DEI3, 0x2060), + INTC_VECT(DMAC_2_DEI4, 0x2080), INTC_VECT(DMAC_2_DEI5, 0x20a0), + INTC_VECT(DMAC_2_DADERR, 0x20c0), + INTC_VECT(DMAC2_1_DEI0, 0x2100), INTC_VECT(DMAC2_1_DEI1, 0x2120), + INTC_VECT(DMAC2_1_DEI2, 0x2140), INTC_VECT(DMAC2_1_DEI3, 0x2160), + INTC_VECT(DMAC2_2_DEI4, 0x2180), INTC_VECT(DMAC2_2_DEI5, 0x21a0), + INTC_VECT(DMAC2_2_DADERR, 0x21c0), + INTC_VECT(DMAC3_1_DEI0, 0x2200), INTC_VECT(DMAC3_1_DEI1, 0x2220), + INTC_VECT(DMAC3_1_DEI2, 0x2240), INTC_VECT(DMAC3_1_DEI3, 0x2260), + INTC_VECT(DMAC3_2_DEI4, 0x2280), INTC_VECT(DMAC3_2_DEI5, 0x22a0), + INTC_VECT(DMAC3_2_DADERR, 0x22c0), + INTC_VECT(SHWYSTAT_RT, 0x1300), INTC_VECT(SHWYSTAT_HS, 0x1d20), + INTC_VECT(SHWYSTAT_COM, 0x1340), + INTC_VECT(ICUSB_ICUSB0, 0x1700), INTC_VECT(ICUSB_ICUSB1, 0x1720), + INTC_VECT(ICUDMC_ICUDMC1, 0x1780), INTC_VECT(ICUDMC_ICUDMC2, 0x17a0), + INTC_VECT(SPU2_SPU0, 0x1800), INTC_VECT(SPU2_SPU1, 0x1820), + INTC_VECT(FSI, 0x1840), + INTC_VECT(FMSI, 0x1860), + INTC_VECT(SCUV, 0x1880), + INTC_VECT(IPMMU_IPMMUB, 0x1900), + INTC_VECT(AP_ARM_CTIIRQ, 0x1980), + INTC_VECT(AP_ARM_DMAEXTERRIRQ, 0x19a0), + INTC_VECT(AP_ARM_DMAIRQ, 0x19c0), + INTC_VECT(AP_ARM_DMASIRQ, 0x19e0), + INTC_VECT(MFIS2, 0x1a00), + INTC_VECT(CPORTR2S, 0x1a20), + INTC_VECT(CMT14, 0x1a40), INTC_VECT(CMT15, 0x1a60), + INTC_VECT(SCIFA6, 0x1a80), +}; + +static struct intc_group intca_groups[] __initdata = { + INTC_GROUP(DMAC_1, DMAC_1_DEI0, + DMAC_1_DEI1, DMAC_1_DEI2, DMAC_1_DEI3), + INTC_GROUP(DMAC_2, DMAC_2_DEI4, + DMAC_2_DEI5, DMAC_2_DADERR), + INTC_GROUP(DMAC2_1, DMAC2_1_DEI0, + DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3), + INTC_GROUP(DMAC2_2, DMAC2_2_DEI4, + DMAC2_2_DEI5, DMAC2_2_DADERR), + INTC_GROUP(DMAC3_1, DMAC3_1_DEI0, + DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3), + INTC_GROUP(DMAC3_2, DMAC3_2_DEI4, + DMAC3_2_DEI5, DMAC3_2_DADERR), + INTC_GROUP(AP_ARM1, AP_ARM_IRQPMU, AP_ARM_COMMTX, AP_ARM_COMMTX), + INTC_GROUP(USBHS, USBHS_USHI0, USBHS_USHI1), + INTC_GROUP(SPU2, SPU2_SPU0, SPU2_SPU1), + INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLTENDI, + FLCTL_FLTREQ0I, FLCTL_FLTREQ1I), + INTC_GROUP(IIC1, IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1), + INTC_GROUP(SDHI0, SDHI0_SDHI0I0, SDHI0_SDHI0I1, + SDHI0_SDHI0I2, SDHI0_SDHI0I3), + INTC_GROUP(SDHI1, SDHI1_SDHI1I0, SDHI1_SDHI1I1, + SDHI1_SDHI1I2, SDHI1_SDHI1I3), + INTC_GROUP(SHWYSTAT, SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM), + INTC_GROUP(ICUSB, ICUSB_ICUSB0, ICUSB_ICUSB1), + INTC_GROUP(ICUDMC, ICUDMC_ICUDMC1, ICUDMC_ICUDMC2), +}; + +static struct intc_mask_reg intca_mask_registers[] = { + { 0xe6900040, 0xe6900060, 8, /* INTMSK00A / INTMSKCLR00A */ + { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } }, + { 0xe6900044, 0xe6900064, 8, /* INTMSK10A / INTMSKCLR10A */ + { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } }, + { 0xe6900048, 0xe6900068, 8, /* INTMSK20A / INTMSKCLR20A */ + { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } }, + { 0xe690004c, 0xe690006c, 8, /* INTMSK30A / INTMSKCLR30A */ + { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } }, + + { 0xe6940080, 0xe69400c0, 8, /* IMR0A / IMCR0A */ + { DMAC2_1_DEI3, DMAC2_1_DEI2, DMAC2_1_DEI1, DMAC2_1_DEI0, + AP_ARM_IRQPMU, 0, AP_ARM_COMMTX, AP_ARM_COMMRX } }, + { 0xe6940084, 0xe69400c4, 8, /* IMR1A / IMCR1A */ + { _2DG, CRYPT_STD, DIRC, 0, + DMAC_1_DEI3, DMAC_1_DEI2, DMAC_1_DEI1, DMAC_1_DEI0 } }, + { 0xe6940088, 0xe69400c8, 8, /* IMR2A / IMCR2A */ + { PINTCA_PINT1, PINTCA_PINT2, 0, 0, + BBIF1, BBIF2, MFI_MFIS, MFI_MFIM } }, + { 0xe694008c, 0xe69400cc, 8, /* IMR3A / IMCR3A */ + { DMAC3_1_DEI3, DMAC3_1_DEI2, DMAC3_1_DEI1, DMAC3_1_DEI0, + DMAC3_2_DADERR, DMAC3_2_DEI5, DMAC3_2_DEI4, IRDA } }, + { 0xe6940090, 0xe69400d0, 8, /* IMR4A / IMCR4A */ + { DDM, 0, 0, 0, + 0, 0, 0, 0 } }, + { 0xe6940094, 0xe69400d4, 8, /* IMR5A / IMCR5A */ + { KEYSC_KEY, DMAC_2_DADERR, DMAC_2_DEI5, DMAC_2_DEI4, + SCIFA3, SCIFA2, SCIFA1, SCIFA0 } }, + { 0xe6940098, 0xe69400d8, 8, /* IMR6A / IMCR6A */ + { SCIFB, SCIFA5, SCIFA4, MSIOF1, + 0, 0, MSIOF2, 0 } }, + { 0xe694009c, 0xe69400dc, 8, /* IMR7A / IMCR7A */ + { SDHI0_SDHI0I3, SDHI0_SDHI0I2, SDHI0_SDHI0I1, SDHI0_SDHI0I0, + FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLTENDI, FLCTL_FLSTEI } }, + { 0xe69400a0, 0xe69400e0, 8, /* IMR8A / IMCR8A */ + { SDHI1_SDHI1I3, SDHI1_SDHI1I2, SDHI1_SDHI1I1, SDHI1_SDHI1I0, + TTI20, USBDMAC_USHDMI, 0, MSUG } }, + { 0xe69400a4, 0xe69400e4, 8, /* IMR9A / IMCR9A */ + { CMT1_CMT13, CMT1_CMT12, CMT1_CMT11, CMT1_CMT10, + CMT2, USBHS_USHI1, USBHS_USHI0, _3DG_SGX540 } }, + { 0xe69400a8, 0xe69400e8, 8, /* IMR10A / IMCR10A */ + { 0, DMAC2_2_DADERR, DMAC2_2_DEI5, DMAC2_2_DEI4, + 0, 0, 0, 0 } }, + { 0xe69400ac, 0xe69400ec, 8, /* IMR11A / IMCR11A */ + { IIC1_DTEI1, IIC1_WAITI1, IIC1_TACKI1, IIC1_ALI1, + LCRC, MSU_MSU2, IRREM, MSU_MSU } }, + { 0xe69400b0, 0xe69400f0, 8, /* IMR12A / IMCR12A */ + { 0, 0, TPU0, TPU1, + TPU2, TPU3, TPU4, 0 } }, + { 0xe69400b4, 0xe69400f4, 8, /* IMR13A / IMCR13A */ + { 0, 0, 0, 0, + MISTY, CMT3, RWDT1, RWDT0 } }, + { 0xe6950080, 0xe69500c0, 8, /* IMR0A3 / IMCR0A3 */ + { SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM, 0, + 0, 0, 0, 0 } }, + { 0xe6950090, 0xe69500d0, 8, /* IMR4A3 / IMCR4A3 */ + { ICUSB_ICUSB0, ICUSB_ICUSB1, 0, 0, + ICUDMC_ICUDMC1, ICUDMC_ICUDMC2, 0, 0 } }, + { 0xe6950094, 0xe69500d4, 8, /* IMR5A3 / IMCR5A3 */ + { SPU2_SPU0, SPU2_SPU1, FSI, FMSI, + SCUV, 0, 0, 0 } }, + { 0xe6950098, 0xe69500d8, 8, /* IMR6A3 / IMCR6A3 */ + { IPMMU_IPMMUB, 0, 0, 0, + AP_ARM_CTIIRQ, AP_ARM_DMAEXTERRIRQ, + AP_ARM_DMAIRQ, AP_ARM_DMASIRQ } }, + { 0xe695009c, 0xe69500dc, 8, /* IMR7A3 / IMCR7A3 */ + { MFIS2, CPORTR2S, CMT14, CMT15, + SCIFA6, 0, 0, 0 } }, +}; + +static struct intc_prio_reg intca_prio_registers[] = { + { 0xe6900010, 0, 32, 4, /* INTPRI00A */ + { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } }, + { 0xe6900014, 0, 32, 4, /* INTPRI10A */ + { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } }, + { 0xe6900018, 0, 32, 4, /* INTPRI10A */ + { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } }, + { 0xe690001c, 0, 32, 4, /* INTPRI30A */ + { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } }, + + { 0xe6940000, 0, 16, 4, /* IPRAA */ { DMAC3_1, DMAC3_2, CMT2, LCRC } }, + { 0xe6940004, 0, 16, 4, /* IPRBA */ { IRDA, 0, BBIF1, BBIF2 } }, + { 0xe6940008, 0, 16, 4, /* IPRCA */ { _2DG, CRYPT_STD, + CMT1_CMT11, AP_ARM1 } }, + { 0xe694000c, 0, 16, 4, /* IPRDA */ { PINTCA_PINT1, PINTCA_PINT2, + CMT1_CMT12, TPU4 } }, + { 0xe6940010, 0, 16, 4, /* IPREA */ { DMAC_1, MFI_MFIS, + MFI_MFIM, USBHS } }, + { 0xe6940014, 0, 16, 4, /* IPRFA */ { KEYSC_KEY, DMAC_2, + _3DG_SGX540, CMT1_CMT10 } }, + { 0xe6940018, 0, 16, 4, /* IPRGA */ { SCIFA0, SCIFA1, + SCIFA2, SCIFA3 } }, + { 0xe694001c, 0, 16, 4, /* IPRGH */ { MSIOF2, USBDMAC_USHDMI, + FLCTL, SDHI0 } }, + { 0xe6940020, 0, 16, 4, /* IPRIA */ { MSIOF1, SCIFA4, MSU_MSU, IIC1 } }, + { 0xe6940024, 0, 16, 4, /* IPRJA */ { DMAC2_1, DMAC2_2, MSUG, TTI20 } }, + { 0xe6940028, 0, 16, 4, /* IPRKA */ { 0, CMT1_CMT13, IRREM, SDHI1 } }, + { 0xe694002c, 0, 16, 4, /* IPRLA */ { TPU0, TPU1, TPU2, TPU3 } }, + { 0xe6940030, 0, 16, 4, /* IPRMA */ { MISTY, CMT3, RWDT1, RWDT0 } }, + { 0xe6940034, 0, 16, 4, /* IPRNA */ { SCIFB, SCIFA5, 0, DDM } }, + { 0xe6940038, 0, 16, 4, /* IPROA */ { 0, 0, DIRC, 0 } }, + { 0xe6950000, 0, 16, 4, /* IPRAA3 */ { SHWYSTAT, 0, 0, 0 } }, + { 0xe6950020, 0, 16, 4, /* IPRIA3 */ { ICUSB, 0, 0, 0 } }, + { 0xe6950024, 0, 16, 4, /* IPRJA3 */ { ICUDMC, 0, 0, 0 } }, + { 0xe6950028, 0, 16, 4, /* IPRKA3 */ { SPU2, 0, FSI, FMSI } }, + { 0xe695002c, 0, 16, 4, /* IPRLA3 */ { SCUV, 0, 0, 0 } }, + { 0xe6950030, 0, 16, 4, /* IPRMA3 */ { IPMMU_IPMMUB, 0, 0, 0 } }, + { 0xe6950034, 0, 16, 4, /* IPRNA3 */ { AP_ARM2, 0, 0, 0 } }, + { 0xe6950038, 0, 16, 4, /* IPROA3 */ { MFIS2, CPORTR2S, + CMT14, CMT15 } }, + { 0xe694003c, 0, 16, 4, /* IPRPA3 */ { SCIFA6, 0, 0, 0 } }, +}; + +static struct intc_sense_reg intca_sense_registers[] __initdata = { + { 0xe6900000, 16, 2, /* ICR1A */ + { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } }, + { 0xe6900004, 16, 2, /* ICR2A */ + { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } }, + { 0xe6900008, 16, 2, /* ICR3A */ + { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } }, + { 0xe690000c, 16, 2, /* ICR4A */ + { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } }, +}; + +static struct intc_mask_reg intca_ack_registers[] __initdata = { + { 0xe6900020, 0, 8, /* INTREQ00A */ + { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } }, + { 0xe6900024, 0, 8, /* INTREQ10A */ + { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } }, + { 0xe6900028, 0, 8, /* INTREQ20A */ + { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } }, + { 0xe690002c, 0, 8, /* INTREQ30A */ + { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } }, +}; + +static DECLARE_INTC_DESC_ACK(intca_desc, "sh7377-intca", + intca_vectors, intca_groups, + intca_mask_registers, intca_prio_registers, + intca_sense_registers, intca_ack_registers); + +void __init sh7377_init_irq(void) +{ + register_intc_controller(&intca_desc); +} diff --git a/arch/arm/mach-shmobile/pfc-sh7367.c b/arch/arm/mach-shmobile/pfc-sh7367.c new file mode 100644 index 00000000000..128555e76e4 --- /dev/null +++ b/arch/arm/mach-shmobile/pfc-sh7367.c @@ -0,0 +1,1801 @@ +/* + * sh7367 processor support - PFC hardware block + * + * Copyright (C) 2010 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/gpio.h> +#include <mach/sh7367.h> + +#define _1(fn, pfx, sfx) fn(pfx, sfx) + +#define _10(fn, pfx, sfx) \ + _1(fn, pfx##0, sfx), _1(fn, pfx##1, sfx), \ + _1(fn, pfx##2, sfx), _1(fn, pfx##3, sfx), \ + _1(fn, pfx##4, sfx), _1(fn, pfx##5, sfx), \ + _1(fn, pfx##6, sfx), _1(fn, pfx##7, sfx), \ + _1(fn, pfx##8, sfx), _1(fn, pfx##9, sfx) + +#define _90(fn, pfx, sfx) \ + _10(fn, pfx##1, sfx), _10(fn, pfx##2, sfx), \ + _10(fn, pfx##3, sfx), _10(fn, pfx##4, sfx), \ + _10(fn, pfx##5, sfx), _10(fn, pfx##6, sfx), \ + _10(fn, pfx##7, sfx), _10(fn, pfx##8, sfx), \ + _10(fn, pfx##9, sfx) + +#define _273(fn, pfx, sfx) \ + _10(fn, pfx, sfx), _90(fn, pfx, sfx), \ + _10(fn, pfx##10, sfx), _90(fn, pfx##1, sfx), \ + _10(fn, pfx##20, sfx), _10(fn, pfx##21, sfx), \ + _10(fn, pfx##22, sfx), _10(fn, pfx##23, sfx), \ + _10(fn, pfx##24, sfx), _10(fn, pfx##25, sfx), \ + _10(fn, pfx##26, sfx), _1(fn, pfx##270, sfx), \ + _1(fn, pfx##271, sfx), _1(fn, pfx##272, sfx) + +#define _PORT(pfx, sfx) pfx##_##sfx +#define PORT_273(str) _273(_PORT, PORT, str) + +enum { + PINMUX_RESERVED = 0, + + PINMUX_DATA_BEGIN, + PORT_273(DATA), /* PORT0_DATA -> PORT272_DATA */ + PINMUX_DATA_END, + + PINMUX_INPUT_BEGIN, + PORT_273(IN), /* PORT0_IN -> PORT272_IN */ + PINMUX_INPUT_END, + + PINMUX_INPUT_PULLUP_BEGIN, + PORT_273(IN_PU), /* PORT0_IN_PU -> PORT272_IN_PU */ + PINMUX_INPUT_PULLUP_END, + + PINMUX_INPUT_PULLDOWN_BEGIN, + PORT_273(IN_PD), /* PORT0_IN_PD -> PORT272_IN_PD */ + PINMUX_INPUT_PULLDOWN_END, + + PINMUX_OUTPUT_BEGIN, + PORT_273(OUT), /* PORT0_OUT -> PORT272_OUT */ + PINMUX_OUTPUT_END, + + PINMUX_FUNCTION_BEGIN, + PORT_273(FN_IN), /* PORT0_FN_IN -> PORT272_FN_IN */ + PORT_273(FN_OUT), /* PORT0_FN_OUT -> PORT272_FN_OUT */ + PORT_273(FN0), /* PORT0_FN0 -> PORT272_FN0 */ + PORT_273(FN1), /* PORT0_FN1 -> PORT272_FN1 */ + PORT_273(FN2), /* PORT0_FN2 -> PORT272_FN2 */ + PORT_273(FN3), /* PORT0_FN3 -> PORT272_FN3 */ + PORT_273(FN4), /* PORT0_FN4 -> PORT272_FN4 */ + PORT_273(FN5), /* PORT0_FN5 -> PORT272_FN5 */ + PORT_273(FN6), /* PORT0_FN6 -> PORT272_FN6 */ + PORT_273(FN7), /* PORT0_FN7 -> PORT272_FN7 */ + + MSELBCR_MSEL2_1, MSELBCR_MSEL2_0, + PINMUX_FUNCTION_END, + + PINMUX_MARK_BEGIN, + /* Special Pull-up / Pull-down Functions */ + PORT48_KEYIN0_PU_MARK, PORT49_KEYIN1_PU_MARK, + PORT50_KEYIN2_PU_MARK, PORT55_KEYIN3_PU_MARK, + PORT56_KEYIN4_PU_MARK, PORT57_KEYIN5_PU_MARK, + PORT58_KEYIN6_PU_MARK, + + /* 49-1 */ + VBUS0_MARK, CPORT0_MARK, CPORT1_MARK, CPORT2_MARK, + CPORT3_MARK, CPORT4_MARK, CPORT5_MARK, CPORT6_MARK, + CPORT7_MARK, CPORT8_MARK, CPORT9_MARK, CPORT10_MARK, + CPORT11_MARK, SIN2_MARK, CPORT12_MARK, XCTS2_MARK, + CPORT13_MARK, RFSPO4_MARK, CPORT14_MARK, RFSPO5_MARK, + CPORT15_MARK, CPORT16_MARK, CPORT17_MARK, SOUT2_MARK, + CPORT18_MARK, XRTS2_MARK, CPORT19_MARK, CPORT20_MARK, + RFSPO6_MARK, CPORT21_MARK, STATUS0_MARK, CPORT22_MARK, + STATUS1_MARK, CPORT23_MARK, STATUS2_MARK, RFSPO7_MARK, + MPORT0_MARK, MPORT1_MARK, B_SYNLD1_MARK, B_SYNLD2_MARK, + XMAINPS_MARK, XDIVPS_MARK, XIDRST_MARK, IDCLK_MARK, + IDIO_MARK, SOUT1_MARK, SCIFA4_TXD_MARK, + M02_BERDAT_MARK, SIN1_MARK, SCIFA4_RXD_MARK, XWUP_MARK, + XRTS1_MARK, SCIFA4_RTS_MARK, M03_BERCLK_MARK, + XCTS1_MARK, SCIFA4_CTS_MARK, + + /* 49-2 */ + HSU_IQ_AGC6_MARK, MFG2_IN2_MARK, MSIOF2_MCK0_MARK, + HSU_IQ_AGC5_MARK, MFG2_IN1_MARK, MSIOF2_MCK1_MARK, + HSU_IQ_AGC4_MARK, MSIOF2_RSYNC_MARK, + HSU_IQ_AGC3_MARK, MFG2_OUT1_MARK, MSIOF2_RSCK_MARK, + HSU_IQ_AGC2_MARK, PORT42_KEYOUT0_MARK, + HSU_IQ_AGC1_MARK, PORT43_KEYOUT1_MARK, + HSU_IQ_AGC0_MARK, PORT44_KEYOUT2_MARK, + HSU_IQ_AGC_ST_MARK, PORT45_KEYOUT3_MARK, + HSU_IQ_PDO_MARK, PORT46_KEYOUT4_MARK, + HSU_IQ_PYO_MARK, PORT47_KEYOUT5_MARK, + HSU_EN_TXMUX_G3MO_MARK, PORT48_KEYIN0_MARK, + HSU_I_TXMUX_G3MO_MARK, PORT49_KEYIN1_MARK, + HSU_Q_TXMUX_G3MO_MARK, PORT50_KEYIN2_MARK, + HSU_SYO_MARK, PORT51_MSIOF2_TSYNC_MARK, + HSU_SDO_MARK, PORT52_MSIOF2_TSCK_MARK, + HSU_TGTTI_G3MO_MARK, PORT53_MSIOF2_TXD_MARK, + B_TIME_STAMP_MARK, PORT54_MSIOF2_RXD_MARK, + HSU_SDI_MARK, PORT55_KEYIN3_MARK, + HSU_SCO_MARK, PORT56_KEYIN4_MARK, + HSU_DREQ_MARK, PORT57_KEYIN5_MARK, + HSU_DACK_MARK, PORT58_KEYIN6_MARK, + HSU_CLK61M_MARK, PORT59_MSIOF2_SS1_MARK, + HSU_XRST_MARK, PORT60_MSIOF2_SS2_MARK, + PCMCLKO_MARK, SYNC8KO_MARK, DNPCM_A_MARK, UPPCM_A_MARK, + XTALB1L_MARK, + GPS_AGC1_MARK, SCIFA0_RTS_MARK, + GPS_AGC2_MARK, SCIFA0_SCK_MARK, + GPS_AGC3_MARK, SCIFA0_TXD_MARK, + GPS_AGC4_MARK, SCIFA0_RXD_MARK, + GPS_PWRD_MARK, SCIFA0_CTS_MARK, + GPS_IM_MARK, GPS_IS_MARK, GPS_QM_MARK, GPS_QS_MARK, + SIUBOMC_MARK, TPU2TO0_MARK, + SIUCKB_MARK, TPU2TO1_MARK, + SIUBOLR_MARK, BBIF2_TSYNC_MARK, TPU2TO2_MARK, + SIUBOBT_MARK, BBIF2_TSCK_MARK, TPU2TO3_MARK, + SIUBOSLD_MARK, BBIF2_TXD_MARK, TPU3TO0_MARK, + SIUBILR_MARK, TPU3TO1_MARK, + SIUBIBT_MARK, TPU3TO2_MARK, + SIUBISLD_MARK, TPU3TO3_MARK, + NMI_MARK, TPU4TO0_MARK, + DNPCM_M_MARK, TPU4TO1_MARK, TPU4TO2_MARK, TPU4TO3_MARK, + IRQ_TMPB_MARK, + PWEN_MARK, MFG1_OUT1_MARK, + OVCN_MARK, MFG1_IN1_MARK, + OVCN2_MARK, MFG1_IN2_MARK, + + /* 49-3 */ + RFSPO1_MARK, RFSPO2_MARK, RFSPO3_MARK, PORT93_VIO_CKO2_MARK, + USBTERM_MARK, EXTLP_MARK, IDIN_MARK, + SCIFA5_CTS_MARK, MFG0_IN1_MARK, + SCIFA5_RTS_MARK, MFG0_IN2_MARK, + SCIFA5_RXD_MARK, + SCIFA5_TXD_MARK, + SCIFA5_SCK_MARK, MFG0_OUT1_MARK, + A0_EA0_MARK, BS_MARK, + A14_EA14_MARK, PORT102_KEYOUT0_MARK, + A15_EA15_MARK, PORT103_KEYOUT1_MARK, DV_CLKOL_MARK, + A16_EA16_MARK, PORT104_KEYOUT2_MARK, + DV_VSYNCL_MARK, MSIOF0_SS1_MARK, + A17_EA17_MARK, PORT105_KEYOUT3_MARK, + DV_HSYNCL_MARK, MSIOF0_TSYNC_MARK, + A18_EA18_MARK, PORT106_KEYOUT4_MARK, + DV_DL0_MARK, MSIOF0_TSCK_MARK, + A19_EA19_MARK, PORT107_KEYOUT5_MARK, + DV_DL1_MARK, MSIOF0_TXD_MARK, + A20_EA20_MARK, PORT108_KEYIN0_MARK, + DV_DL2_MARK, MSIOF0_RSCK_MARK, + A21_EA21_MARK, PORT109_KEYIN1_MARK, + DV_DL3_MARK, MSIOF0_RSYNC_MARK, + A22_EA22_MARK, PORT110_KEYIN2_MARK, + DV_DL4_MARK, MSIOF0_MCK0_MARK, + A23_EA23_MARK, PORT111_KEYIN3_MARK, + DV_DL5_MARK, MSIOF0_MCK1_MARK, + A24_EA24_MARK, PORT112_KEYIN4_MARK, + DV_DL6_MARK, MSIOF0_RXD_MARK, + A25_EA25_MARK, PORT113_KEYIN5_MARK, + DV_DL7_MARK, MSIOF0_SS2_MARK, + A26_MARK, PORT113_KEYIN6_MARK, DV_CLKIL_MARK, + D0_ED0_NAF0_MARK, D1_ED1_NAF1_MARK, D2_ED2_NAF2_MARK, + D3_ED3_NAF3_MARK, D4_ED4_NAF4_MARK, D5_ED5_NAF5_MARK, + D6_ED6_NAF6_MARK, D7_ED7_NAF7_MARK, D8_ED8_NAF8_MARK, + D9_ED9_NAF9_MARK, D10_ED10_NAF10_MARK, D11_ED11_NAF11_MARK, + D12_ED12_NAF12_MARK, D13_ED13_NAF13_MARK, + D14_ED14_NAF14_MARK, D15_ED15_NAF15_MARK, + CS4_MARK, CS5A_MARK, CS5B_MARK, FCE1_MARK, + CS6B_MARK, XCS2_MARK, FCE0_MARK, CS6A_MARK, + DACK0_MARK, WAIT_MARK, DREQ0_MARK, RD_XRD_MARK, + A27_MARK, RDWR_XWE_MARK, WE0_XWR0_FWE_MARK, + WE1_XWR1_MARK, FRB_MARK, CKO_MARK, + NBRSTOUT_MARK, NBRST_MARK, + + /* 49-4 */ + RFSPO0_MARK, PORT146_VIO_CKO2_MARK, TSTMD_MARK, + VIO_VD_MARK, VIO_HD_MARK, + VIO_D0_MARK, VIO_D1_MARK, VIO_D2_MARK, + VIO_D3_MARK, VIO_D4_MARK, VIO_D5_MARK, + VIO_D6_MARK, VIO_D7_MARK, VIO_D8_MARK, + VIO_D9_MARK, VIO_D10_MARK, VIO_D11_MARK, + VIO_D12_MARK, VIO_D13_MARK, VIO_D14_MARK, + VIO_D15_MARK, VIO_CLK_MARK, VIO_FIELD_MARK, + VIO_CKO_MARK, + MFG3_IN1_MARK, MFG3_IN2_MARK, + M9_SLCD_A01_MARK, MFG3_OUT1_MARK, TPU0TO0_MARK, + M10_SLCD_CK1_MARK, MFG4_IN1_MARK, TPU0TO1_MARK, + M11_SLCD_SO1_MARK, MFG4_IN2_MARK, TPU0TO2_MARK, + M12_SLCD_CE1_MARK, MFG4_OUT1_MARK, TPU0TO3_MARK, + LCDD0_MARK, PORT175_KEYOUT0_MARK, DV_D0_MARK, + SIUCKA_MARK, MFG0_OUT2_MARK, + LCDD1_MARK, PORT176_KEYOUT1_MARK, DV_D1_MARK, + SIUAOLR_MARK, BBIF2_TSYNC1_MARK, + LCDD2_MARK, PORT177_KEYOUT2_MARK, DV_D2_MARK, + SIUAOBT_MARK, BBIF2_TSCK1_MARK, + LCDD3_MARK, PORT178_KEYOUT3_MARK, DV_D3_MARK, + SIUAOSLD_MARK, BBIF2_TXD1_MARK, + LCDD4_MARK, PORT179_KEYOUT4_MARK, DV_D4_MARK, + SIUAISPD_MARK, MFG1_OUT2_MARK, + LCDD5_MARK, PORT180_KEYOUT5_MARK, DV_D5_MARK, + SIUAILR_MARK, MFG2_OUT2_MARK, + LCDD6_MARK, DV_D6_MARK, + SIUAIBT_MARK, MFG3_OUT2_MARK, XWR2_MARK, + LCDD7_MARK, DV_D7_MARK, + SIUAISLD_MARK, MFG4_OUT2_MARK, XWR3_MARK, + LCDD8_MARK, DV_D8_MARK, D16_MARK, ED16_MARK, + LCDD9_MARK, DV_D9_MARK, D17_MARK, ED17_MARK, + LCDD10_MARK, DV_D10_MARK, D18_MARK, ED18_MARK, + LCDD11_MARK, DV_D11_MARK, D19_MARK, ED19_MARK, + LCDD12_MARK, DV_D12_MARK, D20_MARK, ED20_MARK, + LCDD13_MARK, DV_D13_MARK, D21_MARK, ED21_MARK, + LCDD14_MARK, DV_D14_MARK, D22_MARK, ED22_MARK, + LCDD15_MARK, DV_D15_MARK, D23_MARK, ED23_MARK, + LCDD16_MARK, DV_HSYNC_MARK, D24_MARK, ED24_MARK, + LCDD17_MARK, DV_VSYNC_MARK, D25_MARK, ED25_MARK, + LCDD18_MARK, DREQ2_MARK, MSIOF0L_TSCK_MARK, + D26_MARK, ED26_MARK, + LCDD19_MARK, MSIOF0L_TSYNC_MARK, + D27_MARK, ED27_MARK, + LCDD20_MARK, TS_SPSYNC1_MARK, MSIOF0L_MCK0_MARK, + D28_MARK, ED28_MARK, + LCDD21_MARK, TS_SDAT1_MARK, MSIOF0L_MCK1_MARK, + D29_MARK, ED29_MARK, + LCDD22_MARK, TS_SDEN1_MARK, MSIOF0L_SS1_MARK, + D30_MARK, ED30_MARK, + LCDD23_MARK, TS_SCK1_MARK, MSIOF0L_SS2_MARK, + D31_MARK, ED31_MARK, + LCDDCK_MARK, LCDWR_MARK, DV_CKO_MARK, SIUAOSPD_MARK, + LCDRD_MARK, DACK2_MARK, MSIOF0L_RSYNC_MARK, + + /* 49-5 */ + LCDHSYN_MARK, LCDCS_MARK, LCDCS2_MARK, DACK3_MARK, + LCDDISP_MARK, LCDRS_MARK, DREQ3_MARK, MSIOF0L_RSCK_MARK, + LCDCSYN_MARK, LCDCSYN2_MARK, DV_CKI_MARK, + LCDLCLK_MARK, DREQ1_MARK, MSIOF0L_RXD_MARK, + LCDDON_MARK, LCDDON2_MARK, DACK1_MARK, MSIOF0L_TXD_MARK, + VIO_DR0_MARK, VIO_DR1_MARK, VIO_DR2_MARK, VIO_DR3_MARK, + VIO_DR4_MARK, VIO_DR5_MARK, VIO_DR6_MARK, VIO_DR7_MARK, + VIO_VDR_MARK, VIO_HDR_MARK, + VIO_CLKR_MARK, VIO_CKOR_MARK, + SCIFA1_TXD_MARK, GPS_PGFA0_MARK, + SCIFA1_SCK_MARK, GPS_PGFA1_MARK, + SCIFA1_RTS_MARK, GPS_EPPSINMON_MARK, + SCIFA1_RXD_MARK, SCIFA1_CTS_MARK, + MSIOF1_TXD_MARK, SCIFA1_TXD2_MARK, GPS_TXD_MARK, + MSIOF1_TSYNC_MARK, SCIFA1_CTS2_MARK, I2C_SDA2_MARK, + MSIOF1_TSCK_MARK, SCIFA1_SCK2_MARK, + MSIOF1_RXD_MARK, SCIFA1_RXD2_MARK, GPS_RXD_MARK, + MSIOF1_RSCK_MARK, SCIFA1_RTS2_MARK, + MSIOF1_RSYNC_MARK, I2C_SCL2_MARK, + MSIOF1_MCK0_MARK, MSIOF1_MCK1_MARK, + MSIOF1_SS1_MARK, EDBGREQ3_MARK, + MSIOF1_SS2_MARK, + PORT236_IROUT_MARK, IRDA_OUT_MARK, + IRDA_IN_MARK, IRDA_FIRSEL_MARK, + TPU1TO0_MARK, TS_SPSYNC3_MARK, + TPU1TO1_MARK, TS_SDAT3_MARK, + TPU1TO2_MARK, TS_SDEN3_MARK, PORT241_MSIOF2_SS1_MARK, + TPU1TO3_MARK, PORT242_MSIOF2_TSCK_MARK, + M13_BSW_MARK, PORT243_MSIOF2_TSYNC_MARK, + M14_GSW_MARK, PORT244_MSIOF2_TXD_MARK, + PORT245_IROUT_MARK, M15_RSW_MARK, + SOUT3_MARK, SCIFA2_TXD1_MARK, + SIN3_MARK, SCIFA2_RXD1_MARK, + XRTS3_MARK, SCIFA2_RTS1_MARK, PORT248_MSIOF2_SS2_MARK, + XCTS3_MARK, SCIFA2_CTS1_MARK, PORT249_MSIOF2_RXD_MARK, + DINT_MARK, SCIFA2_SCK1_MARK, TS_SCK3_MARK, + SDHICLK0_MARK, TCK2_MARK, + SDHICD0_MARK, + SDHID0_0_MARK, TMS2_MARK, + SDHID0_1_MARK, TDO2_MARK, + SDHID0_2_MARK, TDI2_MARK, + SDHID0_3_MARK, RTCK2_MARK, + + /* 49-6 */ + SDHICMD0_MARK, TRST2_MARK, + SDHIWP0_MARK, EDBGREQ2_MARK, + SDHICLK1_MARK, TCK3_MARK, + SDHID1_0_MARK, M11_SLCD_SO2_MARK, + TS_SPSYNC2_MARK, TMS3_MARK, + SDHID1_1_MARK, M9_SLCD_AO2_MARK, + TS_SDAT2_MARK, TDO3_MARK, + SDHID1_2_MARK, M10_SLCD_CK2_MARK, + TS_SDEN2_MARK, TDI3_MARK, + SDHID1_3_MARK, M12_SLCD_CE2_MARK, + TS_SCK2_MARK, RTCK3_MARK, + SDHICMD1_MARK, TRST3_MARK, + SDHICLK2_MARK, SCIFB_SCK_MARK, + SDHID2_0_MARK, SCIFB_TXD_MARK, + SDHID2_1_MARK, SCIFB_CTS_MARK, + SDHID2_2_MARK, SCIFB_RXD_MARK, + SDHID2_3_MARK, SCIFB_RTS_MARK, + SDHICMD2_MARK, + RESETOUTS_MARK, + DIVLOCK_MARK, + PINMUX_MARK_END, +}; + +#define PORT_DATA_I(nr) \ + PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_IN) + +#define PORT_DATA_I_PD(nr) \ + PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \ + PORT##nr##_IN, PORT##nr##_IN_PD) + +#define PORT_DATA_I_PU(nr) \ + PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \ + PORT##nr##_IN, PORT##nr##_IN_PU) + +#define PORT_DATA_I_PU_PD(nr) \ + PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \ + PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU) + +#define PORT_DATA_O(nr) \ + PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT) + +#define PORT_DATA_IO(nr) \ + PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \ + PORT##nr##_IN) + +#define PORT_DATA_IO_PD(nr) \ + PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \ + PORT##nr##_IN, PORT##nr##_IN_PD) + +#define PORT_DATA_IO_PU(nr) \ + PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \ + PORT##nr##_IN, PORT##nr##_IN_PU) + +#define PORT_DATA_IO_PU_PD(nr) \ + PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \ + PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU) + + +static pinmux_enum_t pinmux_data[] = { + + /* specify valid pin states for each pin in GPIO mode */ + + /* 49-1 (GPIO) */ + PORT_DATA_I_PD(0), + PORT_DATA_I_PU(1), PORT_DATA_I_PU(2), PORT_DATA_I_PU(3), + PORT_DATA_I_PU(4), PORT_DATA_I_PU(5), PORT_DATA_I_PU(6), + PORT_DATA_I_PU(7), PORT_DATA_I_PU(8), PORT_DATA_I_PU(9), + PORT_DATA_I_PU(10), PORT_DATA_I_PU(11), PORT_DATA_I_PU(12), + PORT_DATA_I_PU(13), + PORT_DATA_IO_PU_PD(14), PORT_DATA_IO_PU_PD(15), + PORT_DATA_O(16), PORT_DATA_O(17), PORT_DATA_O(18), PORT_DATA_O(19), + PORT_DATA_O(20), PORT_DATA_O(21), PORT_DATA_O(22), PORT_DATA_O(23), + PORT_DATA_O(24), PORT_DATA_O(25), PORT_DATA_O(26), + PORT_DATA_I_PD(27), PORT_DATA_I_PD(28), + PORT_DATA_O(29), PORT_DATA_O(30), PORT_DATA_O(31), PORT_DATA_O(32), + PORT_DATA_IO_PU(33), + PORT_DATA_O(34), + PORT_DATA_I_PU(35), + PORT_DATA_O(36), + PORT_DATA_I_PU_PD(37), + + /* 49-2 (GPIO) */ + PORT_DATA_IO_PU_PD(38), + PORT_DATA_IO_PD(39), PORT_DATA_IO_PD(40), PORT_DATA_IO_PD(41), + PORT_DATA_O(42), PORT_DATA_O(43), PORT_DATA_O(44), PORT_DATA_O(45), + PORT_DATA_O(46), PORT_DATA_O(47), + PORT_DATA_I_PU_PD(48), PORT_DATA_I_PU_PD(49), PORT_DATA_I_PU_PD(50), + PORT_DATA_IO_PD(51), PORT_DATA_IO_PD(52), + PORT_DATA_O(53), + PORT_DATA_IO_PD(54), + PORT_DATA_I_PU_PD(55), + PORT_DATA_IO_PU_PD(56), + PORT_DATA_I_PU_PD(57), + PORT_DATA_IO_PU_PD(58), + PORT_DATA_O(59), PORT_DATA_O(60), PORT_DATA_O(61), PORT_DATA_O(62), + PORT_DATA_O(63), + PORT_DATA_I_PU(64), + PORT_DATA_O(65), PORT_DATA_O(66), PORT_DATA_O(67), PORT_DATA_O(68), + PORT_DATA_IO_PD(69), PORT_DATA_IO_PD(70), + PORT_DATA_I_PD(71), PORT_DATA_I_PD(72), PORT_DATA_I_PD(73), + PORT_DATA_I_PD(74), + PORT_DATA_IO_PU_PD(75), PORT_DATA_IO_PU_PD(76), + PORT_DATA_IO_PD(77), PORT_DATA_IO_PD(78), + PORT_DATA_O(79), + PORT_DATA_IO_PD(80), PORT_DATA_IO_PD(81), PORT_DATA_IO_PD(82), + PORT_DATA_IO_PU_PD(83), PORT_DATA_IO_PU_PD(84), + PORT_DATA_IO_PU_PD(85), PORT_DATA_IO_PU_PD(86), + PORT_DATA_I_PD(87), + PORT_DATA_IO_PU_PD(88), + PORT_DATA_I_PU_PD(89), PORT_DATA_I_PU_PD(90), + + /* 49-3 (GPIO) */ + PORT_DATA_O(91), PORT_DATA_O(92), PORT_DATA_O(93), PORT_DATA_O(94), + PORT_DATA_I_PU_PD(95), + PORT_DATA_IO_PU_PD(96), PORT_DATA_IO_PU_PD(97), PORT_DATA_IO_PU_PD(98), + PORT_DATA_IO_PU_PD(99), PORT_DATA_IO_PU_PD(100), + PORT_DATA_IO(101), PORT_DATA_IO(102), PORT_DATA_IO(103), + PORT_DATA_IO_PD(104), PORT_DATA_IO_PD(105), PORT_DATA_IO_PD(106), + PORT_DATA_IO_PD(107), + PORT_DATA_IO_PU_PD(108), PORT_DATA_IO_PU_PD(109), + PORT_DATA_IO_PU_PD(110), PORT_DATA_IO_PU_PD(111), + PORT_DATA_IO_PU_PD(112), PORT_DATA_IO_PU_PD(113), + PORT_DATA_IO_PU_PD(114), + PORT_DATA_IO_PU(115), PORT_DATA_IO_PU(116), PORT_DATA_IO_PU(117), + PORT_DATA_IO_PU(118), PORT_DATA_IO_PU(119), PORT_DATA_IO_PU(120), + PORT_DATA_IO_PU(121), PORT_DATA_IO_PU(122), PORT_DATA_IO_PU(123), + PORT_DATA_IO_PU(124), PORT_DATA_IO_PU(125), PORT_DATA_IO_PU(126), + PORT_DATA_IO_PU(127), PORT_DATA_IO_PU(128), PORT_DATA_IO_PU(129), + PORT_DATA_IO_PU(130), + PORT_DATA_O(131), PORT_DATA_O(132), PORT_DATA_O(133), + PORT_DATA_IO_PU(134), + PORT_DATA_O(135), PORT_DATA_O(136), + PORT_DATA_I_PU_PD(137), + PORT_DATA_IO(138), + PORT_DATA_IO_PU_PD(139), + PORT_DATA_IO(140), PORT_DATA_IO(141), + PORT_DATA_I_PU(142), + PORT_DATA_O(143), PORT_DATA_O(144), + PORT_DATA_I_PU(145), + + /* 49-4 (GPIO) */ + PORT_DATA_O(146), + PORT_DATA_I_PU_PD(147), + PORT_DATA_I_PD(148), PORT_DATA_I_PD(149), + PORT_DATA_IO_PD(150), PORT_DATA_IO_PD(151), PORT_DATA_IO_PD(152), + PORT_DATA_IO_PD(153), PORT_DATA_IO_PD(154), PORT_DATA_IO_PD(155), + PORT_DATA_IO_PD(156), PORT_DATA_IO_PD(157), PORT_DATA_IO_PD(158), + PORT_DATA_IO_PD(159), PORT_DATA_IO_PD(160), PORT_DATA_IO_PD(161), + PORT_DATA_IO_PD(162), PORT_DATA_IO_PD(163), PORT_DATA_IO_PD(164), + PORT_DATA_IO_PD(165), PORT_DATA_IO_PD(166), + PORT_DATA_IO_PU_PD(167), + PORT_DATA_O(168), + PORT_DATA_I_PD(169), PORT_DATA_I_PD(170), + PORT_DATA_O(171), + PORT_DATA_IO_PD(172), PORT_DATA_IO_PD(173), + PORT_DATA_O(174), + PORT_DATA_IO_PD(175), PORT_DATA_IO_PD(176), PORT_DATA_IO_PD(177), + PORT_DATA_IO_PD(178), PORT_DATA_IO_PD(179), PORT_DATA_IO_PD(180), + PORT_DATA_IO_PD(181), PORT_DATA_IO_PD(182), PORT_DATA_IO_PD(183), + PORT_DATA_IO_PD(184), PORT_DATA_IO_PD(185), PORT_DATA_IO_PD(186), + PORT_DATA_IO_PD(187), PORT_DATA_IO_PD(188), PORT_DATA_IO_PD(189), + PORT_DATA_IO_PD(190), PORT_DATA_IO_PD(191), PORT_DATA_IO_PD(192), + PORT_DATA_IO_PD(193), PORT_DATA_IO_PD(194), PORT_DATA_IO_PD(195), + PORT_DATA_IO_PD(196), PORT_DATA_IO_PD(197), PORT_DATA_IO_PD(198), + PORT_DATA_O(199), + PORT_DATA_IO_PD(200), + + /* 49-5 (GPIO) */ + PORT_DATA_O(201), + PORT_DATA_IO_PD(202), PORT_DATA_IO_PD(203), + PORT_DATA_I(204), + PORT_DATA_O(205), + PORT_DATA_IO_PD(206), PORT_DATA_IO_PD(207), PORT_DATA_IO_PD(208), + PORT_DATA_IO_PD(209), PORT_DATA_IO_PD(210), PORT_DATA_IO_PD(211), + PORT_DATA_IO_PD(212), PORT_DATA_IO_PD(213), PORT_DATA_IO_PD(214), + PORT_DATA_IO_PD(215), PORT_DATA_IO_PD(216), + PORT_DATA_O(217), + PORT_DATA_I_PU_PD(218), PORT_DATA_I_PU_PD(219), + PORT_DATA_O(220), PORT_DATA_O(221), PORT_DATA_O(222), + PORT_DATA_I_PD(223), + PORT_DATA_I_PU_PD(224), + PORT_DATA_O(225), + PORT_DATA_IO_PD(226), + PORT_DATA_IO_PU_PD(227), + PORT_DATA_I_PD(228), + PORT_DATA_IO_PD(229), PORT_DATA_IO_PD(230), + PORT_DATA_I_PU_PD(231), PORT_DATA_I_PU_PD(232), + PORT_DATA_IO_PU_PD(233), PORT_DATA_IO_PU_PD(234), + PORT_DATA_I_PU_PD(235), + PORT_DATA_O(236), + PORT_DATA_I_PD(237), + PORT_DATA_IO_PU_PD(238), PORT_DATA_IO_PU_PD(239), + PORT_DATA_IO_PD(240), PORT_DATA_IO_PD(241), + PORT_DATA_IO_PD(242), PORT_DATA_IO_PD(243), + PORT_DATA_O(244), + PORT_DATA_IO_PU_PD(245), + PORT_DATA_O(246), + PORT_DATA_I_PD(247), + PORT_DATA_IO_PU_PD(248), + PORT_DATA_I_PU_PD(249), + PORT_DATA_IO_PD(250), PORT_DATA_IO_PD(251), + PORT_DATA_IO_PU_PD(252), PORT_DATA_IO_PU_PD(253), + PORT_DATA_IO_PU_PD(254), PORT_DATA_IO_PU_PD(255), + PORT_DATA_IO_PU_PD(256), + + /* 49-6 (GPIO) */ + PORT_DATA_IO_PU_PD(257), PORT_DATA_IO_PU_PD(258), + PORT_DATA_IO_PD(259), + PORT_DATA_IO_PU(260), PORT_DATA_IO_PU(261), PORT_DATA_IO_PU(262), + PORT_DATA_IO_PU(263), PORT_DATA_IO_PU(264), + PORT_DATA_O(265), + PORT_DATA_IO_PU(266), PORT_DATA_IO_PU(267), PORT_DATA_IO_PU(268), + PORT_DATA_IO_PU(269), PORT_DATA_IO_PU(270), + PORT_DATA_O(271), + PORT_DATA_I_PD(272), + + /* Special Pull-up / Pull-down Functions */ + PINMUX_DATA(PORT48_KEYIN0_PU_MARK, MSELBCR_MSEL2_1, + PORT48_FN2, PORT48_IN_PU), + PINMUX_DATA(PORT49_KEYIN1_PU_MARK, MSELBCR_MSEL2_1, + PORT49_FN2, PORT49_IN_PU), + PINMUX_DATA(PORT50_KEYIN2_PU_MARK, MSELBCR_MSEL2_1, + PORT50_FN2, PORT50_IN_PU), + PINMUX_DATA(PORT55_KEYIN3_PU_MARK, MSELBCR_MSEL2_1, + PORT55_FN2, PORT55_IN_PU), + PINMUX_DATA(PORT56_KEYIN4_PU_MARK, MSELBCR_MSEL2_1, + PORT56_FN2, PORT56_IN_PU), + PINMUX_DATA(PORT57_KEYIN5_PU_MARK, MSELBCR_MSEL2_1, + PORT57_FN2, PORT57_IN_PU), + PINMUX_DATA(PORT58_KEYIN6_PU_MARK, MSELBCR_MSEL2_1, + PORT58_FN2, PORT58_IN_PU), + + /* 49-1 (FN) */ + PINMUX_DATA(VBUS0_MARK, PORT0_FN1), + PINMUX_DATA(CPORT0_MARK, PORT1_FN1), + PINMUX_DATA(CPORT1_MARK, PORT2_FN1), + PINMUX_DATA(CPORT2_MARK, PORT3_FN1), + PINMUX_DATA(CPORT3_MARK, PORT4_FN1), + PINMUX_DATA(CPORT4_MARK, PORT5_FN1), + PINMUX_DATA(CPORT5_MARK, PORT6_FN1), + PINMUX_DATA(CPORT6_MARK, PORT7_FN1), + PINMUX_DATA(CPORT7_MARK, PORT8_FN1), + PINMUX_DATA(CPORT8_MARK, PORT9_FN1), + PINMUX_DATA(CPORT9_MARK, PORT10_FN1), + PINMUX_DATA(CPORT10_MARK, PORT11_FN1), + PINMUX_DATA(CPORT11_MARK, PORT12_FN1), + PINMUX_DATA(SIN2_MARK, PORT12_FN2), + PINMUX_DATA(CPORT12_MARK, PORT13_FN1), + PINMUX_DATA(XCTS2_MARK, PORT13_FN2), + PINMUX_DATA(CPORT13_MARK, PORT14_FN1), + PINMUX_DATA(RFSPO4_MARK, PORT14_FN2), + PINMUX_DATA(CPORT14_MARK, PORT15_FN1), + PINMUX_DATA(RFSPO5_MARK, PORT15_FN2), + PINMUX_DATA(CPORT15_MARK, PORT16_FN1), + PINMUX_DATA(CPORT16_MARK, PORT17_FN1), + PINMUX_DATA(CPORT17_MARK, PORT18_FN1), + PINMUX_DATA(SOUT2_MARK, PORT18_FN2), + PINMUX_DATA(CPORT18_MARK, PORT19_FN1), + PINMUX_DATA(XRTS2_MARK, PORT19_FN1), + PINMUX_DATA(CPORT19_MARK, PORT20_FN1), + PINMUX_DATA(CPORT20_MARK, PORT21_FN1), + PINMUX_DATA(RFSPO6_MARK, PORT21_FN2), + PINMUX_DATA(CPORT21_MARK, PORT22_FN1), + PINMUX_DATA(STATUS0_MARK, PORT22_FN2), + PINMUX_DATA(CPORT22_MARK, PORT23_FN1), + PINMUX_DATA(STATUS1_MARK, PORT23_FN2), + PINMUX_DATA(CPORT23_MARK, PORT24_FN1), + PINMUX_DATA(STATUS2_MARK, PORT24_FN2), + PINMUX_DATA(RFSPO7_MARK, PORT24_FN3), + PINMUX_DATA(MPORT0_MARK, PORT25_FN1), + PINMUX_DATA(MPORT1_MARK, PORT26_FN1), + PINMUX_DATA(B_SYNLD1_MARK, PORT27_FN1), + PINMUX_DATA(B_SYNLD2_MARK, PORT28_FN1), + PINMUX_DATA(XMAINPS_MARK, PORT29_FN1), + PINMUX_DATA(XDIVPS_MARK, PORT30_FN1), + PINMUX_DATA(XIDRST_MARK, PORT31_FN1), + PINMUX_DATA(IDCLK_MARK, PORT32_FN1), + PINMUX_DATA(IDIO_MARK, PORT33_FN1), + PINMUX_DATA(SOUT1_MARK, PORT34_FN1), + PINMUX_DATA(SCIFA4_TXD_MARK, PORT34_FN2), + PINMUX_DATA(M02_BERDAT_MARK, PORT34_FN3), + PINMUX_DATA(SIN1_MARK, PORT35_FN1), + PINMUX_DATA(SCIFA4_RXD_MARK, PORT35_FN2), + PINMUX_DATA(XWUP_MARK, PORT35_FN3), + PINMUX_DATA(XRTS1_MARK, PORT36_FN1), + PINMUX_DATA(SCIFA4_RTS_MARK, PORT36_FN2), + PINMUX_DATA(M03_BERCLK_MARK, PORT36_FN3), + PINMUX_DATA(XCTS1_MARK, PORT37_FN1), + PINMUX_DATA(SCIFA4_CTS_MARK, PORT37_FN2), + + /* 49-2 (FN) */ + PINMUX_DATA(HSU_IQ_AGC6_MARK, PORT38_FN1), + PINMUX_DATA(MFG2_IN2_MARK, PORT38_FN2), + PINMUX_DATA(MSIOF2_MCK0_MARK, PORT38_FN3), + PINMUX_DATA(HSU_IQ_AGC5_MARK, PORT39_FN1), + PINMUX_DATA(MFG2_IN1_MARK, PORT39_FN2), + PINMUX_DATA(MSIOF2_MCK1_MARK, PORT39_FN3), + PINMUX_DATA(HSU_IQ_AGC4_MARK, PORT40_FN1), + PINMUX_DATA(MSIOF2_RSYNC_MARK, PORT40_FN3), + PINMUX_DATA(HSU_IQ_AGC3_MARK, PORT41_FN1), + PINMUX_DATA(MFG2_OUT1_MARK, PORT41_FN2), + PINMUX_DATA(MSIOF2_RSCK_MARK, PORT41_FN3), + PINMUX_DATA(HSU_IQ_AGC2_MARK, PORT42_FN1), + PINMUX_DATA(PORT42_KEYOUT0_MARK, MSELBCR_MSEL2_1, PORT42_FN2), + PINMUX_DATA(HSU_IQ_AGC1_MARK, PORT43_FN1), + PINMUX_DATA(PORT43_KEYOUT1_MARK, MSELBCR_MSEL2_1, PORT43_FN2), + PINMUX_DATA(HSU_IQ_AGC0_MARK, PORT44_FN1), + PINMUX_DATA(PORT44_KEYOUT2_MARK, MSELBCR_MSEL2_1, PORT44_FN2), + PINMUX_DATA(HSU_IQ_AGC_ST_MARK, PORT45_FN1), + PINMUX_DATA(PORT45_KEYOUT3_MARK, MSELBCR_MSEL2_1, PORT45_FN2), + PINMUX_DATA(HSU_IQ_PDO_MARK, PORT46_FN1), + PINMUX_DATA(PORT46_KEYOUT4_MARK, MSELBCR_MSEL2_1, PORT46_FN2), + PINMUX_DATA(HSU_IQ_PYO_MARK, PORT47_FN1), + PINMUX_DATA(PORT47_KEYOUT5_MARK, MSELBCR_MSEL2_1, PORT47_FN2), + PINMUX_DATA(HSU_EN_TXMUX_G3MO_MARK, PORT48_FN1), + PINMUX_DATA(PORT48_KEYIN0_MARK, MSELBCR_MSEL2_1, PORT48_FN2), + PINMUX_DATA(HSU_I_TXMUX_G3MO_MARK, PORT49_FN1), + PINMUX_DATA(PORT49_KEYIN1_MARK, MSELBCR_MSEL2_1, PORT49_FN2), + PINMUX_DATA(HSU_Q_TXMUX_G3MO_MARK, PORT50_FN1), + PINMUX_DATA(PORT50_KEYIN2_MARK, MSELBCR_MSEL2_1, PORT50_FN2), + PINMUX_DATA(HSU_SYO_MARK, PORT51_FN1), + PINMUX_DATA(PORT51_MSIOF2_TSYNC_MARK, PORT51_FN2), + PINMUX_DATA(HSU_SDO_MARK, PORT52_FN1), + PINMUX_DATA(PORT52_MSIOF2_TSCK_MARK, PORT52_FN2), + PINMUX_DATA(HSU_TGTTI_G3MO_MARK, PORT53_FN1), + PINMUX_DATA(PORT53_MSIOF2_TXD_MARK, PORT53_FN2), + PINMUX_DATA(B_TIME_STAMP_MARK, PORT54_FN1), + PINMUX_DATA(PORT54_MSIOF2_RXD_MARK, PORT54_FN2), + PINMUX_DATA(HSU_SDI_MARK, PORT55_FN1), + PINMUX_DATA(PORT55_KEYIN3_MARK, MSELBCR_MSEL2_1, PORT55_FN2), + PINMUX_DATA(HSU_SCO_MARK, PORT56_FN1), + PINMUX_DATA(PORT56_KEYIN4_MARK, MSELBCR_MSEL2_1, PORT56_FN2), + PINMUX_DATA(HSU_DREQ_MARK, PORT57_FN1), + PINMUX_DATA(PORT57_KEYIN5_MARK, MSELBCR_MSEL2_1, PORT57_FN2), + PINMUX_DATA(HSU_DACK_MARK, PORT58_FN1), + PINMUX_DATA(PORT58_KEYIN6_MARK, MSELBCR_MSEL2_1, PORT58_FN2), + PINMUX_DATA(HSU_CLK61M_MARK, PORT59_FN1), + PINMUX_DATA(PORT59_MSIOF2_SS1_MARK, PORT59_FN2), + PINMUX_DATA(HSU_XRST_MARK, PORT60_FN1), + PINMUX_DATA(PORT60_MSIOF2_SS2_MARK, PORT60_FN2), + PINMUX_DATA(PCMCLKO_MARK, PORT61_FN1), + PINMUX_DATA(SYNC8KO_MARK, PORT62_FN1), + PINMUX_DATA(DNPCM_A_MARK, PORT63_FN1), + PINMUX_DATA(UPPCM_A_MARK, PORT64_FN1), + PINMUX_DATA(XTALB1L_MARK, PORT65_FN1), + PINMUX_DATA(GPS_AGC1_MARK, PORT66_FN1), + PINMUX_DATA(SCIFA0_RTS_MARK, PORT66_FN2), + PINMUX_DATA(GPS_AGC2_MARK, PORT67_FN1), + PINMUX_DATA(SCIFA0_SCK_MARK, PORT67_FN2), + PINMUX_DATA(GPS_AGC3_MARK, PORT68_FN1), + PINMUX_DATA(SCIFA0_TXD_MARK, PORT68_FN2), + PINMUX_DATA(GPS_AGC4_MARK, PORT69_FN1), + PINMUX_DATA(SCIFA0_RXD_MARK, PORT69_FN2), + PINMUX_DATA(GPS_PWRD_MARK, PORT70_FN1), + PINMUX_DATA(SCIFA0_CTS_MARK, PORT70_FN2), + PINMUX_DATA(GPS_IM_MARK, PORT71_FN1), + PINMUX_DATA(GPS_IS_MARK, PORT72_FN1), + PINMUX_DATA(GPS_QM_MARK, PORT73_FN1), + PINMUX_DATA(GPS_QS_MARK, PORT74_FN1), + PINMUX_DATA(SIUBOMC_MARK, PORT75_FN1), + PINMUX_DATA(TPU2TO0_MARK, PORT75_FN3), + PINMUX_DATA(SIUCKB_MARK, PORT76_FN1), + PINMUX_DATA(TPU2TO1_MARK, PORT76_FN3), + PINMUX_DATA(SIUBOLR_MARK, PORT77_FN1), + PINMUX_DATA(BBIF2_TSYNC_MARK, PORT77_FN2), + PINMUX_DATA(TPU2TO2_MARK, PORT77_FN3), + PINMUX_DATA(SIUBOBT_MARK, PORT78_FN1), + PINMUX_DATA(BBIF2_TSCK_MARK, PORT78_FN2), + PINMUX_DATA(TPU2TO3_MARK, PORT78_FN3), + PINMUX_DATA(SIUBOSLD_MARK, PORT79_FN1), + PINMUX_DATA(BBIF2_TXD_MARK, PORT79_FN2), + PINMUX_DATA(TPU3TO0_MARK, PORT79_FN3), + PINMUX_DATA(SIUBILR_MARK, PORT80_FN1), + PINMUX_DATA(TPU3TO1_MARK, PORT80_FN3), + PINMUX_DATA(SIUBIBT_MARK, PORT81_FN1), + PINMUX_DATA(TPU3TO2_MARK, PORT81_FN3), + PINMUX_DATA(SIUBISLD_MARK, PORT82_FN1), + PINMUX_DATA(TPU3TO3_MARK, PORT82_FN3), + PINMUX_DATA(NMI_MARK, PORT83_FN1), + PINMUX_DATA(TPU4TO0_MARK, PORT83_FN3), + PINMUX_DATA(DNPCM_M_MARK, PORT84_FN1), + PINMUX_DATA(TPU4TO1_MARK, PORT84_FN3), + PINMUX_DATA(TPU4TO2_MARK, PORT85_FN3), + PINMUX_DATA(TPU4TO3_MARK, PORT86_FN3), + PINMUX_DATA(IRQ_TMPB_MARK, PORT87_FN1), + PINMUX_DATA(PWEN_MARK, PORT88_FN1), + PINMUX_DATA(MFG1_OUT1_MARK, PORT88_FN2), + PINMUX_DATA(OVCN_MARK, PORT89_FN1), + PINMUX_DATA(MFG1_IN1_MARK, PORT89_FN2), + PINMUX_DATA(OVCN2_MARK, PORT90_FN1), + PINMUX_DATA(MFG1_IN2_MARK, PORT90_FN2), + + /* 49-3 (FN) */ + PINMUX_DATA(RFSPO1_MARK, PORT91_FN1), + PINMUX_DATA(RFSPO2_MARK, PORT92_FN1), + PINMUX_DATA(RFSPO3_MARK, PORT93_FN1), + PINMUX_DATA(PORT93_VIO_CKO2_MARK, PORT93_FN2), + PINMUX_DATA(USBTERM_MARK, PORT94_FN1), + PINMUX_DATA(EXTLP_MARK, PORT94_FN2), + PINMUX_DATA(IDIN_MARK, PORT95_FN1), + PINMUX_DATA(SCIFA5_CTS_MARK, PORT96_FN1), + PINMUX_DATA(MFG0_IN1_MARK, PORT96_FN2), + PINMUX_DATA(SCIFA5_RTS_MARK, PORT97_FN1), + PINMUX_DATA(MFG0_IN2_MARK, PORT97_FN2), + PINMUX_DATA(SCIFA5_RXD_MARK, PORT98_FN1), + PINMUX_DATA(SCIFA5_TXD_MARK, PORT99_FN1), + PINMUX_DATA(SCIFA5_SCK_MARK, PORT100_FN1), + PINMUX_DATA(MFG0_OUT1_MARK, PORT100_FN2), + PINMUX_DATA(A0_EA0_MARK, PORT101_FN1), + PINMUX_DATA(BS_MARK, PORT101_FN2), + PINMUX_DATA(A14_EA14_MARK, PORT102_FN1), + PINMUX_DATA(PORT102_KEYOUT0_MARK, MSELBCR_MSEL2_0, PORT102_FN2), + PINMUX_DATA(A15_EA15_MARK, PORT103_FN1), + PINMUX_DATA(PORT103_KEYOUT1_MARK, MSELBCR_MSEL2_0, PORT103_FN2), + PINMUX_DATA(DV_CLKOL_MARK, PORT103_FN3), + PINMUX_DATA(A16_EA16_MARK, PORT104_FN1), + PINMUX_DATA(PORT104_KEYOUT2_MARK, MSELBCR_MSEL2_0, PORT104_FN2), + PINMUX_DATA(DV_VSYNCL_MARK, PORT104_FN3), + PINMUX_DATA(MSIOF0_SS1_MARK, PORT104_FN4), + PINMUX_DATA(A17_EA17_MARK, PORT105_FN1), + PINMUX_DATA(PORT105_KEYOUT3_MARK, MSELBCR_MSEL2_0, PORT105_FN2), + PINMUX_DATA(DV_HSYNCL_MARK, PORT105_FN3), + PINMUX_DATA(MSIOF0_TSYNC_MARK, PORT105_FN4), + PINMUX_DATA(A18_EA18_MARK, PORT106_FN1), + PINMUX_DATA(PORT106_KEYOUT4_MARK, MSELBCR_MSEL2_0, PORT106_FN2), + PINMUX_DATA(DV_DL0_MARK, PORT106_FN3), + PINMUX_DATA(MSIOF0_TSCK_MARK, PORT106_FN4), + PINMUX_DATA(A19_EA19_MARK, PORT107_FN1), + PINMUX_DATA(PORT107_KEYOUT5_MARK, MSELBCR_MSEL2_0, PORT107_FN2), + PINMUX_DATA(DV_DL1_MARK, PORT107_FN3), + PINMUX_DATA(MSIOF0_TXD_MARK, PORT107_FN4), + PINMUX_DATA(A20_EA20_MARK, PORT108_FN1), + PINMUX_DATA(PORT108_KEYIN0_MARK, MSELBCR_MSEL2_0, PORT108_FN2), + PINMUX_DATA(DV_DL2_MARK, PORT108_FN3), + PINMUX_DATA(MSIOF0_RSCK_MARK, PORT108_FN4), + PINMUX_DATA(A21_EA21_MARK, PORT109_FN1), + PINMUX_DATA(PORT109_KEYIN1_MARK, MSELBCR_MSEL2_0, PORT109_FN2), + PINMUX_DATA(DV_DL3_MARK, PORT109_FN3), + PINMUX_DATA(MSIOF0_RSYNC_MARK, PORT109_FN4), + PINMUX_DATA(A22_EA22_MARK, PORT110_FN1), + PINMUX_DATA(PORT110_KEYIN2_MARK, MSELBCR_MSEL2_0, PORT110_FN2), + PINMUX_DATA(DV_DL4_MARK, PORT110_FN3), + PINMUX_DATA(MSIOF0_MCK0_MARK, PORT110_FN4), + PINMUX_DATA(A23_EA23_MARK, PORT111_FN1), + PINMUX_DATA(PORT111_KEYIN3_MARK, MSELBCR_MSEL2_0, PORT111_FN2), + PINMUX_DATA(DV_DL5_MARK, PORT111_FN3), + PINMUX_DATA(MSIOF0_MCK1_MARK, PORT111_FN4), + PINMUX_DATA(A24_EA24_MARK, PORT112_FN1), + PINMUX_DATA(PORT112_KEYIN4_MARK, MSELBCR_MSEL2_0, PORT112_FN2), + PINMUX_DATA(DV_DL6_MARK, PORT112_FN3), + PINMUX_DATA(MSIOF0_RXD_MARK, PORT112_FN4), + PINMUX_DATA(A25_EA25_MARK, PORT113_FN1), + PINMUX_DATA(PORT113_KEYIN5_MARK, MSELBCR_MSEL2_0, PORT113_FN2), + PINMUX_DATA(DV_DL7_MARK, PORT113_FN3), + PINMUX_DATA(MSIOF0_SS2_MARK, PORT113_FN4), + PINMUX_DATA(A26_MARK, PORT114_FN1), + PINMUX_DATA(PORT113_KEYIN6_MARK, MSELBCR_MSEL2_0, PORT114_FN2), + PINMUX_DATA(DV_CLKIL_MARK, PORT114_FN3), + PINMUX_DATA(D0_ED0_NAF0_MARK, PORT115_FN1), + PINMUX_DATA(D1_ED1_NAF1_MARK, PORT116_FN1), + PINMUX_DATA(D2_ED2_NAF2_MARK, PORT117_FN1), + PINMUX_DATA(D3_ED3_NAF3_MARK, PORT118_FN1), + PINMUX_DATA(D4_ED4_NAF4_MARK, PORT119_FN1), + PINMUX_DATA(D5_ED5_NAF5_MARK, PORT120_FN1), + PINMUX_DATA(D6_ED6_NAF6_MARK, PORT121_FN1), + PINMUX_DATA(D7_ED7_NAF7_MARK, PORT122_FN1), + PINMUX_DATA(D8_ED8_NAF8_MARK, PORT123_FN1), + PINMUX_DATA(D9_ED9_NAF9_MARK, PORT124_FN1), + PINMUX_DATA(D10_ED10_NAF10_MARK, PORT125_FN1), + PINMUX_DATA(D11_ED11_NAF11_MARK, PORT126_FN1), + PINMUX_DATA(D12_ED12_NAF12_MARK, PORT127_FN1), + PINMUX_DATA(D13_ED13_NAF13_MARK, PORT128_FN1), + PINMUX_DATA(D14_ED14_NAF14_MARK, PORT129_FN1), + PINMUX_DATA(D15_ED15_NAF15_MARK, PORT130_FN1), + PINMUX_DATA(CS4_MARK, PORT131_FN1), + PINMUX_DATA(CS5A_MARK, PORT132_FN1), + PINMUX_DATA(CS5B_MARK, PORT133_FN1), + PINMUX_DATA(FCE1_MARK, PORT133_FN2), + PINMUX_DATA(CS6B_MARK, PORT134_FN1), + PINMUX_DATA(XCS2_MARK, PORT134_FN2), + PINMUX_DATA(FCE0_MARK, PORT135_FN1), + PINMUX_DATA(CS6A_MARK, PORT136_FN1), + PINMUX_DATA(DACK0_MARK, PORT136_FN2), + PINMUX_DATA(WAIT_MARK, PORT137_FN1), + PINMUX_DATA(DREQ0_MARK, PORT137_FN2), + PINMUX_DATA(RD_XRD_MARK, PORT138_FN1), + PINMUX_DATA(A27_MARK, PORT139_FN1), + PINMUX_DATA(RDWR_XWE_MARK, PORT139_FN2), + PINMUX_DATA(WE0_XWR0_FWE_MARK, PORT140_FN1), + PINMUX_DATA(WE1_XWR1_MARK, PORT141_FN1), + PINMUX_DATA(FRB_MARK, PORT142_FN1), + PINMUX_DATA(CKO_MARK, PORT143_FN1), + PINMUX_DATA(NBRSTOUT_MARK, PORT144_FN1), + PINMUX_DATA(NBRST_MARK, PORT145_FN1), + + /* 49-4 (FN) */ + PINMUX_DATA(RFSPO0_MARK, PORT146_FN1), + PINMUX_DATA(PORT146_VIO_CKO2_MARK, PORT146_FN2), + PINMUX_DATA(TSTMD_MARK, PORT147_FN1), + PINMUX_DATA(VIO_VD_MARK, PORT148_FN1), + PINMUX_DATA(VIO_HD_MARK, PORT149_FN1), + PINMUX_DATA(VIO_D0_MARK, PORT150_FN1), + PINMUX_DATA(VIO_D1_MARK, PORT151_FN1), + PINMUX_DATA(VIO_D2_MARK, PORT152_FN1), + PINMUX_DATA(VIO_D3_MARK, PORT153_FN1), + PINMUX_DATA(VIO_D4_MARK, PORT154_FN1), + PINMUX_DATA(VIO_D5_MARK, PORT155_FN1), + PINMUX_DATA(VIO_D6_MARK, PORT156_FN1), + PINMUX_DATA(VIO_D7_MARK, PORT157_FN1), + PINMUX_DATA(VIO_D8_MARK, PORT158_FN1), + PINMUX_DATA(VIO_D9_MARK, PORT159_FN1), + PINMUX_DATA(VIO_D10_MARK, PORT160_FN1), + PINMUX_DATA(VIO_D11_MARK, PORT161_FN1), + PINMUX_DATA(VIO_D12_MARK, PORT162_FN1), + PINMUX_DATA(VIO_D13_MARK, PORT163_FN1), + PINMUX_DATA(VIO_D14_MARK, PORT164_FN1), + PINMUX_DATA(VIO_D15_MARK, PORT165_FN1), + PINMUX_DATA(VIO_CLK_MARK, PORT166_FN1), + PINMUX_DATA(VIO_FIELD_MARK, PORT167_FN1), + PINMUX_DATA(VIO_CKO_MARK, PORT168_FN1), + PINMUX_DATA(MFG3_IN1_MARK, PORT169_FN2), + PINMUX_DATA(MFG3_IN2_MARK, PORT170_FN2), + PINMUX_DATA(M9_SLCD_A01_MARK, PORT171_FN1), + PINMUX_DATA(MFG3_OUT1_MARK, PORT171_FN2), + PINMUX_DATA(TPU0TO0_MARK, PORT171_FN3), + PINMUX_DATA(M10_SLCD_CK1_MARK, PORT172_FN1), + PINMUX_DATA(MFG4_IN1_MARK, PORT172_FN2), + PINMUX_DATA(TPU0TO1_MARK, PORT172_FN3), + PINMUX_DATA(M11_SLCD_SO1_MARK, PORT173_FN1), + PINMUX_DATA(MFG4_IN2_MARK, PORT173_FN2), + PINMUX_DATA(TPU0TO2_MARK, PORT173_FN3), + PINMUX_DATA(M12_SLCD_CE1_MARK, PORT174_FN1), + PINMUX_DATA(MFG4_OUT1_MARK, PORT174_FN2), + PINMUX_DATA(TPU0TO3_MARK, PORT174_FN3), + PINMUX_DATA(LCDD0_MARK, PORT175_FN1), + PINMUX_DATA(PORT175_KEYOUT0_MARK, PORT175_FN2), + PINMUX_DATA(DV_D0_MARK, PORT175_FN3), + PINMUX_DATA(SIUCKA_MARK, PORT175_FN4), + PINMUX_DATA(MFG0_OUT2_MARK, PORT175_FN5), + PINMUX_DATA(LCDD1_MARK, PORT176_FN1), + PINMUX_DATA(PORT176_KEYOUT1_MARK, PORT176_FN2), + PINMUX_DATA(DV_D1_MARK, PORT176_FN3), + PINMUX_DATA(SIUAOLR_MARK, PORT176_FN4), + PINMUX_DATA(BBIF2_TSYNC1_MARK, PORT176_FN5), + PINMUX_DATA(LCDD2_MARK, PORT177_FN1), + PINMUX_DATA(PORT177_KEYOUT2_MARK, PORT177_FN2), + PINMUX_DATA(DV_D2_MARK, PORT177_FN3), + PINMUX_DATA(SIUAOBT_MARK, PORT177_FN4), + PINMUX_DATA(BBIF2_TSCK1_MARK, PORT177_FN5), + PINMUX_DATA(LCDD3_MARK, PORT178_FN1), + PINMUX_DATA(PORT178_KEYOUT3_MARK, PORT178_FN2), + PINMUX_DATA(DV_D3_MARK, PORT178_FN3), + PINMUX_DATA(SIUAOSLD_MARK, PORT178_FN4), + PINMUX_DATA(BBIF2_TXD1_MARK, PORT178_FN5), + PINMUX_DATA(LCDD4_MARK, PORT179_FN1), + PINMUX_DATA(PORT179_KEYOUT4_MARK, PORT179_FN2), + PINMUX_DATA(DV_D4_MARK, PORT179_FN3), + PINMUX_DATA(SIUAISPD_MARK, PORT179_FN4), + PINMUX_DATA(MFG1_OUT2_MARK, PORT179_FN5), + PINMUX_DATA(LCDD5_MARK, PORT180_FN1), + PINMUX_DATA(PORT180_KEYOUT5_MARK, PORT180_FN2), + PINMUX_DATA(DV_D5_MARK, PORT180_FN3), + PINMUX_DATA(SIUAILR_MARK, PORT180_FN4), + PINMUX_DATA(MFG2_OUT2_MARK, PORT180_FN5), + PINMUX_DATA(LCDD6_MARK, PORT181_FN1), + PINMUX_DATA(DV_D6_MARK, PORT181_FN3), + PINMUX_DATA(SIUAIBT_MARK, PORT181_FN4), + PINMUX_DATA(MFG3_OUT2_MARK, PORT181_FN5), + PINMUX_DATA(XWR2_MARK, PORT181_FN7), + PINMUX_DATA(LCDD7_MARK, PORT182_FN1), + PINMUX_DATA(DV_D7_MARK, PORT182_FN3), + PINMUX_DATA(SIUAISLD_MARK, PORT182_FN4), + PINMUX_DATA(MFG4_OUT2_MARK, PORT182_FN5), + PINMUX_DATA(XWR3_MARK, PORT182_FN7), + PINMUX_DATA(LCDD8_MARK, PORT183_FN1), + PINMUX_DATA(DV_D8_MARK, PORT183_FN3), + PINMUX_DATA(D16_MARK, PORT183_FN6), + PINMUX_DATA(ED16_MARK, PORT183_FN7), + PINMUX_DATA(LCDD9_MARK, PORT184_FN1), + PINMUX_DATA(DV_D9_MARK, PORT184_FN3), + PINMUX_DATA(D17_MARK, PORT184_FN6), + PINMUX_DATA(ED17_MARK, PORT184_FN7), + PINMUX_DATA(LCDD10_MARK, PORT185_FN1), + PINMUX_DATA(DV_D10_MARK, PORT185_FN3), + PINMUX_DATA(D18_MARK, PORT185_FN6), + PINMUX_DATA(ED18_MARK, PORT185_FN7), + PINMUX_DATA(LCDD11_MARK, PORT186_FN1), + PINMUX_DATA(DV_D11_MARK, PORT186_FN3), + PINMUX_DATA(D19_MARK, PORT186_FN6), + PINMUX_DATA(ED19_MARK, PORT186_FN7), + PINMUX_DATA(LCDD12_MARK, PORT187_FN1), + PINMUX_DATA(DV_D12_MARK, PORT187_FN3), + PINMUX_DATA(D20_MARK, PORT187_FN6), + PINMUX_DATA(ED20_MARK, PORT187_FN7), + PINMUX_DATA(LCDD13_MARK, PORT188_FN1), + PINMUX_DATA(DV_D13_MARK, PORT188_FN3), + PINMUX_DATA(D21_MARK, PORT188_FN6), + PINMUX_DATA(ED21_MARK, PORT188_FN7), + PINMUX_DATA(LCDD14_MARK, PORT189_FN1), + PINMUX_DATA(DV_D14_MARK, PORT189_FN3), + PINMUX_DATA(D22_MARK, PORT189_FN6), + PINMUX_DATA(ED22_MARK, PORT189_FN7), + PINMUX_DATA(LCDD15_MARK, PORT190_FN1), + PINMUX_DATA(DV_D15_MARK, PORT190_FN3), + PINMUX_DATA(D23_MARK, PORT190_FN6), + PINMUX_DATA(ED23_MARK, PORT190_FN7), + PINMUX_DATA(LCDD16_MARK, PORT191_FN1), + PINMUX_DATA(DV_HSYNC_MARK, PORT191_FN3), + PINMUX_DATA(D24_MARK, PORT191_FN6), + PINMUX_DATA(ED24_MARK, PORT191_FN7), + PINMUX_DATA(LCDD17_MARK, PORT192_FN1), + PINMUX_DATA(DV_VSYNC_MARK, PORT192_FN3), + PINMUX_DATA(D25_MARK, PORT192_FN6), + PINMUX_DATA(ED25_MARK, PORT192_FN7), + PINMUX_DATA(LCDD18_MARK, PORT193_FN1), + PINMUX_DATA(DREQ2_MARK, PORT193_FN2), + PINMUX_DATA(MSIOF0L_TSCK_MARK, PORT193_FN5), + PINMUX_DATA(D26_MARK, PORT193_FN6), + PINMUX_DATA(ED26_MARK, PORT193_FN7), + PINMUX_DATA(LCDD19_MARK, PORT194_FN1), + PINMUX_DATA(MSIOF0L_TSYNC_MARK, PORT194_FN5), + PINMUX_DATA(D27_MARK, PORT194_FN6), + PINMUX_DATA(ED27_MARK, PORT194_FN7), + PINMUX_DATA(LCDD20_MARK, PORT195_FN1), + PINMUX_DATA(TS_SPSYNC1_MARK, PORT195_FN2), + PINMUX_DATA(MSIOF0L_MCK0_MARK, PORT195_FN5), + PINMUX_DATA(D28_MARK, PORT195_FN6), + PINMUX_DATA(ED28_MARK, PORT195_FN7), + PINMUX_DATA(LCDD21_MARK, PORT196_FN1), + PINMUX_DATA(TS_SDAT1_MARK, PORT196_FN2), + PINMUX_DATA(MSIOF0L_MCK1_MARK, PORT196_FN5), + PINMUX_DATA(D29_MARK, PORT196_FN6), + PINMUX_DATA(ED29_MARK, PORT196_FN7), + PINMUX_DATA(LCDD22_MARK, PORT197_FN1), + PINMUX_DATA(TS_SDEN1_MARK, PORT197_FN2), + PINMUX_DATA(MSIOF0L_SS1_MARK, PORT197_FN5), + PINMUX_DATA(D30_MARK, PORT197_FN6), + PINMUX_DATA(ED30_MARK, PORT197_FN7), + PINMUX_DATA(LCDD23_MARK, PORT198_FN1), + PINMUX_DATA(TS_SCK1_MARK, PORT198_FN2), + PINMUX_DATA(MSIOF0L_SS2_MARK, PORT198_FN5), + PINMUX_DATA(D31_MARK, PORT198_FN6), + PINMUX_DATA(ED31_MARK, PORT198_FN7), + PINMUX_DATA(LCDDCK_MARK, PORT199_FN1), + PINMUX_DATA(LCDWR_MARK, PORT199_FN2), + PINMUX_DATA(DV_CKO_MARK, PORT199_FN3), + PINMUX_DATA(SIUAOSPD_MARK, PORT199_FN4), + PINMUX_DATA(LCDRD_MARK, PORT200_FN1), + PINMUX_DATA(DACK2_MARK, PORT200_FN2), + PINMUX_DATA(MSIOF0L_RSYNC_MARK, PORT200_FN5), + + /* 49-5 (FN) */ + PINMUX_DATA(LCDHSYN_MARK, PORT201_FN1), + PINMUX_DATA(LCDCS_MARK, PORT201_FN2), + PINMUX_DATA(LCDCS2_MARK, PORT201_FN3), + PINMUX_DATA(DACK3_MARK, PORT201_FN4), + PINMUX_DATA(LCDDISP_MARK, PORT202_FN1), + PINMUX_DATA(LCDRS_MARK, PORT202_FN2), + PINMUX_DATA(DREQ3_MARK, PORT202_FN4), + PINMUX_DATA(MSIOF0L_RSCK_MARK, PORT202_FN5), + PINMUX_DATA(LCDCSYN_MARK, PORT203_FN1), + PINMUX_DATA(LCDCSYN2_MARK, PORT203_FN2), + PINMUX_DATA(DV_CKI_MARK, PORT203_FN3), + PINMUX_DATA(LCDLCLK_MARK, PORT204_FN1), + PINMUX_DATA(DREQ1_MARK, PORT204_FN3), + PINMUX_DATA(MSIOF0L_RXD_MARK, PORT204_FN5), + PINMUX_DATA(LCDDON_MARK, PORT205_FN1), + PINMUX_DATA(LCDDON2_MARK, PORT205_FN2), + PINMUX_DATA(DACK1_MARK, PORT205_FN3), + PINMUX_DATA(MSIOF0L_TXD_MARK, PORT205_FN5), + PINMUX_DATA(VIO_DR0_MARK, PORT206_FN1), + PINMUX_DATA(VIO_DR1_MARK, PORT207_FN1), + PINMUX_DATA(VIO_DR2_MARK, PORT208_FN1), + PINMUX_DATA(VIO_DR3_MARK, PORT209_FN1), + PINMUX_DATA(VIO_DR4_MARK, PORT210_FN1), + PINMUX_DATA(VIO_DR5_MARK, PORT211_FN1), + PINMUX_DATA(VIO_DR6_MARK, PORT212_FN1), + PINMUX_DATA(VIO_DR7_MARK, PORT213_FN1), + PINMUX_DATA(VIO_VDR_MARK, PORT214_FN1), + PINMUX_DATA(VIO_HDR_MARK, PORT215_FN1), + PINMUX_DATA(VIO_CLKR_MARK, PORT216_FN1), + PINMUX_DATA(VIO_CKOR_MARK, PORT217_FN1), + PINMUX_DATA(SCIFA1_TXD_MARK, PORT220_FN2), + PINMUX_DATA(GPS_PGFA0_MARK, PORT220_FN3), + PINMUX_DATA(SCIFA1_SCK_MARK, PORT221_FN2), + PINMUX_DATA(GPS_PGFA1_MARK, PORT221_FN3), + PINMUX_DATA(SCIFA1_RTS_MARK, PORT222_FN2), + PINMUX_DATA(GPS_EPPSINMON_MARK, PORT222_FN3), + PINMUX_DATA(SCIFA1_RXD_MARK, PORT223_FN2), + PINMUX_DATA(SCIFA1_CTS_MARK, PORT224_FN2), + PINMUX_DATA(MSIOF1_TXD_MARK, PORT225_FN1), + PINMUX_DATA(SCIFA1_TXD2_MARK, PORT225_FN2), + PINMUX_DATA(GPS_TXD_MARK, PORT225_FN3), + PINMUX_DATA(MSIOF1_TSYNC_MARK, PORT226_FN1), + PINMUX_DATA(SCIFA1_CTS2_MARK, PORT226_FN2), + PINMUX_DATA(I2C_SDA2_MARK, PORT226_FN3), + PINMUX_DATA(MSIOF1_TSCK_MARK, PORT227_FN1), + PINMUX_DATA(SCIFA1_SCK2_MARK, PORT227_FN2), + PINMUX_DATA(MSIOF1_RXD_MARK, PORT228_FN1), + PINMUX_DATA(SCIFA1_RXD2_MARK, PORT228_FN2), + PINMUX_DATA(GPS_RXD_MARK, PORT228_FN3), + PINMUX_DATA(MSIOF1_RSCK_MARK, PORT229_FN1), + PINMUX_DATA(SCIFA1_RTS2_MARK, PORT229_FN2), + PINMUX_DATA(MSIOF1_RSYNC_MARK, PORT230_FN1), + PINMUX_DATA(I2C_SCL2_MARK, PORT230_FN3), + PINMUX_DATA(MSIOF1_MCK0_MARK, PORT231_FN1), + PINMUX_DATA(MSIOF1_MCK1_MARK, PORT232_FN1), + PINMUX_DATA(MSIOF1_SS1_MARK, PORT233_FN1), + PINMUX_DATA(EDBGREQ3_MARK, PORT233_FN2), + PINMUX_DATA(MSIOF1_SS2_MARK, PORT234_FN1), + PINMUX_DATA(PORT236_IROUT_MARK, PORT236_FN1), + PINMUX_DATA(IRDA_OUT_MARK, PORT236_FN2), + PINMUX_DATA(IRDA_IN_MARK, PORT237_FN2), + PINMUX_DATA(IRDA_FIRSEL_MARK, PORT238_FN1), + PINMUX_DATA(TPU1TO0_MARK, PORT239_FN3), + PINMUX_DATA(TS_SPSYNC3_MARK, PORT239_FN4), + PINMUX_DATA(TPU1TO1_MARK, PORT240_FN3), + PINMUX_DATA(TS_SDAT3_MARK, PORT240_FN4), + PINMUX_DATA(TPU1TO2_MARK, PORT241_FN3), + PINMUX_DATA(TS_SDEN3_MARK, PORT241_FN4), + PINMUX_DATA(PORT241_MSIOF2_SS1_MARK, PORT241_FN5), + PINMUX_DATA(TPU1TO3_MARK, PORT242_FN3), + PINMUX_DATA(PORT242_MSIOF2_TSCK_MARK, PORT242_FN5), + PINMUX_DATA(M13_BSW_MARK, PORT243_FN2), + PINMUX_DATA(PORT243_MSIOF2_TSYNC_MARK, PORT243_FN5), + PINMUX_DATA(M14_GSW_MARK, PORT244_FN2), + PINMUX_DATA(PORT244_MSIOF2_TXD_MARK, PORT244_FN5), + PINMUX_DATA(PORT245_IROUT_MARK, PORT245_FN1), + PINMUX_DATA(M15_RSW_MARK, PORT245_FN2), + PINMUX_DATA(SOUT3_MARK, PORT246_FN1), + PINMUX_DATA(SCIFA2_TXD1_MARK, PORT246_FN2), + PINMUX_DATA(SIN3_MARK, PORT247_FN1), + PINMUX_DATA(SCIFA2_RXD1_MARK, PORT247_FN2), + PINMUX_DATA(XRTS3_MARK, PORT248_FN1), + PINMUX_DATA(SCIFA2_RTS1_MARK, PORT248_FN2), + PINMUX_DATA(PORT248_MSIOF2_SS2_MARK, PORT248_FN5), + PINMUX_DATA(XCTS3_MARK, PORT249_FN1), + PINMUX_DATA(SCIFA2_CTS1_MARK, PORT249_FN2), + PINMUX_DATA(PORT249_MSIOF2_RXD_MARK, PORT249_FN5), + PINMUX_DATA(DINT_MARK, PORT250_FN1), + PINMUX_DATA(SCIFA2_SCK1_MARK, PORT250_FN2), + PINMUX_DATA(TS_SCK3_MARK, PORT250_FN4), + PINMUX_DATA(SDHICLK0_MARK, PORT251_FN1), + PINMUX_DATA(TCK2_MARK, PORT251_FN2), + PINMUX_DATA(SDHICD0_MARK, PORT252_FN1), + PINMUX_DATA(SDHID0_0_MARK, PORT253_FN1), + PINMUX_DATA(TMS2_MARK, PORT253_FN2), + PINMUX_DATA(SDHID0_1_MARK, PORT254_FN1), + PINMUX_DATA(TDO2_MARK, PORT254_FN2), + PINMUX_DATA(SDHID0_2_MARK, PORT255_FN1), + PINMUX_DATA(TDI2_MARK, PORT255_FN2), + PINMUX_DATA(SDHID0_3_MARK, PORT256_FN1), + PINMUX_DATA(RTCK2_MARK, PORT256_FN2), + + /* 49-6 (FN) */ + PINMUX_DATA(SDHICMD0_MARK, PORT257_FN1), + PINMUX_DATA(TRST2_MARK, PORT257_FN2), + PINMUX_DATA(SDHIWP0_MARK, PORT258_FN1), + PINMUX_DATA(EDBGREQ2_MARK, PORT258_FN2), + PINMUX_DATA(SDHICLK1_MARK, PORT259_FN1), + PINMUX_DATA(TCK3_MARK, PORT259_FN4), + PINMUX_DATA(SDHID1_0_MARK, PORT260_FN1), + PINMUX_DATA(M11_SLCD_SO2_MARK, PORT260_FN2), + PINMUX_DATA(TS_SPSYNC2_MARK, PORT260_FN3), + PINMUX_DATA(TMS3_MARK, PORT260_FN4), + PINMUX_DATA(SDHID1_1_MARK, PORT261_FN1), + PINMUX_DATA(M9_SLCD_AO2_MARK, PORT261_FN2), + PINMUX_DATA(TS_SDAT2_MARK, PORT261_FN3), + PINMUX_DATA(TDO3_MARK, PORT261_FN4), + PINMUX_DATA(SDHID1_2_MARK, PORT262_FN1), + PINMUX_DATA(M10_SLCD_CK2_MARK, PORT262_FN2), + PINMUX_DATA(TS_SDEN2_MARK, PORT262_FN3), + PINMUX_DATA(TDI3_MARK, PORT262_FN4), + PINMUX_DATA(SDHID1_3_MARK, PORT263_FN1), + PINMUX_DATA(M12_SLCD_CE2_MARK, PORT263_FN2), + PINMUX_DATA(TS_SCK2_MARK, PORT263_FN3), + PINMUX_DATA(RTCK3_MARK, PORT263_FN4), + PINMUX_DATA(SDHICMD1_MARK, PORT264_FN1), + PINMUX_DATA(TRST3_MARK, PORT264_FN4), + PINMUX_DATA(SDHICLK2_MARK, PORT265_FN1), + PINMUX_DATA(SCIFB_SCK_MARK, PORT265_FN2), + PINMUX_DATA(SDHID2_0_MARK, PORT266_FN1), + PINMUX_DATA(SCIFB_TXD_MARK, PORT266_FN2), + PINMUX_DATA(SDHID2_1_MARK, PORT267_FN1), + PINMUX_DATA(SCIFB_CTS_MARK, PORT267_FN2), + PINMUX_DATA(SDHID2_2_MARK, PORT268_FN1), + PINMUX_DATA(SCIFB_RXD_MARK, PORT268_FN2), + PINMUX_DATA(SDHID2_3_MARK, PORT269_FN1), + PINMUX_DATA(SCIFB_RTS_MARK, PORT269_FN2), + PINMUX_DATA(SDHICMD2_MARK, PORT270_FN1), + PINMUX_DATA(RESETOUTS_MARK, PORT271_FN1), + PINMUX_DATA(DIVLOCK_MARK, PORT272_FN1), +}; + +#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA) +#define GPIO_PORT_273() _273(_GPIO_PORT, , unused) +#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK) + +static struct pinmux_gpio pinmux_gpios[] = { + /* 49-1 -> 49-6 (GPIO) */ + GPIO_PORT_273(), + + /* Special Pull-up / Pull-down Functions */ + GPIO_FN(PORT48_KEYIN0_PU), GPIO_FN(PORT49_KEYIN1_PU), + GPIO_FN(PORT50_KEYIN2_PU), GPIO_FN(PORT55_KEYIN3_PU), + GPIO_FN(PORT56_KEYIN4_PU), GPIO_FN(PORT57_KEYIN5_PU), + GPIO_FN(PORT58_KEYIN6_PU), + + /* 49-1 (FN) */ + GPIO_FN(VBUS0), GPIO_FN(CPORT0), GPIO_FN(CPORT1), GPIO_FN(CPORT2), + GPIO_FN(CPORT3), GPIO_FN(CPORT4), GPIO_FN(CPORT5), GPIO_FN(CPORT6), + GPIO_FN(CPORT7), GPIO_FN(CPORT8), GPIO_FN(CPORT9), GPIO_FN(CPORT10), + GPIO_FN(CPORT11), GPIO_FN(SIN2), GPIO_FN(CPORT12), GPIO_FN(XCTS2), + GPIO_FN(CPORT13), GPIO_FN(RFSPO4), GPIO_FN(CPORT14), GPIO_FN(RFSPO5), + GPIO_FN(CPORT15), GPIO_FN(CPORT16), GPIO_FN(CPORT17), GPIO_FN(SOUT2), + GPIO_FN(CPORT18), GPIO_FN(XRTS2), GPIO_FN(CPORT19), GPIO_FN(CPORT20), + GPIO_FN(RFSPO6), GPIO_FN(CPORT21), GPIO_FN(STATUS0), GPIO_FN(CPORT22), + GPIO_FN(STATUS1), GPIO_FN(CPORT23), GPIO_FN(STATUS2), GPIO_FN(RFSPO7), + GPIO_FN(MPORT0), GPIO_FN(MPORT1), GPIO_FN(B_SYNLD1), GPIO_FN(B_SYNLD2), + GPIO_FN(XMAINPS), GPIO_FN(XDIVPS), GPIO_FN(XIDRST), GPIO_FN(IDCLK), + GPIO_FN(IDIO), GPIO_FN(SOUT1), GPIO_FN(SCIFA4_TXD), + GPIO_FN(M02_BERDAT), GPIO_FN(SIN1), GPIO_FN(SCIFA4_RXD), GPIO_FN(XWUP), + GPIO_FN(XRTS1), GPIO_FN(SCIFA4_RTS), GPIO_FN(M03_BERCLK), + GPIO_FN(XCTS1), GPIO_FN(SCIFA4_CTS), + + /* 49-2 (FN) */ + GPIO_FN(HSU_IQ_AGC6), GPIO_FN(MFG2_IN2), GPIO_FN(MSIOF2_MCK0), + GPIO_FN(HSU_IQ_AGC5), GPIO_FN(MFG2_IN1), GPIO_FN(MSIOF2_MCK1), + GPIO_FN(HSU_IQ_AGC4), GPIO_FN(MSIOF2_RSYNC), + GPIO_FN(HSU_IQ_AGC3), GPIO_FN(MFG2_OUT1), GPIO_FN(MSIOF2_RSCK), + GPIO_FN(HSU_IQ_AGC2), GPIO_FN(PORT42_KEYOUT0), + GPIO_FN(HSU_IQ_AGC1), GPIO_FN(PORT43_KEYOUT1), + GPIO_FN(HSU_IQ_AGC0), GPIO_FN(PORT44_KEYOUT2), + GPIO_FN(HSU_IQ_AGC_ST), GPIO_FN(PORT45_KEYOUT3), + GPIO_FN(HSU_IQ_PDO), GPIO_FN(PORT46_KEYOUT4), + GPIO_FN(HSU_IQ_PYO), GPIO_FN(PORT47_KEYOUT5), + GPIO_FN(HSU_EN_TXMUX_G3MO), GPIO_FN(PORT48_KEYIN0), + GPIO_FN(HSU_I_TXMUX_G3MO), GPIO_FN(PORT49_KEYIN1), + GPIO_FN(HSU_Q_TXMUX_G3MO), GPIO_FN(PORT50_KEYIN2), + GPIO_FN(HSU_SYO), GPIO_FN(PORT51_MSIOF2_TSYNC), + GPIO_FN(HSU_SDO), GPIO_FN(PORT52_MSIOF2_TSCK), + GPIO_FN(HSU_TGTTI_G3MO), GPIO_FN(PORT53_MSIOF2_TXD), + GPIO_FN(B_TIME_STAMP), GPIO_FN(PORT54_MSIOF2_RXD), + GPIO_FN(HSU_SDI), GPIO_FN(PORT55_KEYIN3), + GPIO_FN(HSU_SCO), GPIO_FN(PORT56_KEYIN4), + GPIO_FN(HSU_DREQ), GPIO_FN(PORT57_KEYIN5), + GPIO_FN(HSU_DACK), GPIO_FN(PORT58_KEYIN6), + GPIO_FN(HSU_CLK61M), GPIO_FN(PORT59_MSIOF2_SS1), + GPIO_FN(HSU_XRST), GPIO_FN(PORT60_MSIOF2_SS2), + GPIO_FN(PCMCLKO), GPIO_FN(SYNC8KO), GPIO_FN(DNPCM_A), GPIO_FN(UPPCM_A), + GPIO_FN(XTALB1L), + GPIO_FN(GPS_AGC1), GPIO_FN(SCIFA0_RTS), + GPIO_FN(GPS_AGC2), GPIO_FN(SCIFA0_SCK), + GPIO_FN(GPS_AGC3), GPIO_FN(SCIFA0_TXD), + GPIO_FN(GPS_AGC4), GPIO_FN(SCIFA0_RXD), + GPIO_FN(GPS_PWRD), GPIO_FN(SCIFA0_CTS), + GPIO_FN(GPS_IM), GPIO_FN(GPS_IS), GPIO_FN(GPS_QM), GPIO_FN(GPS_QS), + GPIO_FN(SIUBOMC), GPIO_FN(TPU2TO0), + GPIO_FN(SIUCKB), GPIO_FN(TPU2TO1), + GPIO_FN(SIUBOLR), GPIO_FN(BBIF2_TSYNC), GPIO_FN(TPU2TO2), + GPIO_FN(SIUBOBT), GPIO_FN(BBIF2_TSCK), GPIO_FN(TPU2TO3), + GPIO_FN(SIUBOSLD), GPIO_FN(BBIF2_TXD), GPIO_FN(TPU3TO0), + GPIO_FN(SIUBILR), GPIO_FN(TPU3TO1), + GPIO_FN(SIUBIBT), GPIO_FN(TPU3TO2), + GPIO_FN(SIUBISLD), GPIO_FN(TPU3TO3), + GPIO_FN(NMI), GPIO_FN(TPU4TO0), + GPIO_FN(DNPCM_M), GPIO_FN(TPU4TO1), GPIO_FN(TPU4TO2), GPIO_FN(TPU4TO3), + GPIO_FN(IRQ_TMPB), + GPIO_FN(PWEN), GPIO_FN(MFG1_OUT1), + GPIO_FN(OVCN), GPIO_FN(MFG1_IN1), + GPIO_FN(OVCN2), GPIO_FN(MFG1_IN2), + + /* 49-3 (FN) */ + GPIO_FN(RFSPO1), GPIO_FN(RFSPO2), GPIO_FN(RFSPO3), + GPIO_FN(PORT93_VIO_CKO2), + GPIO_FN(USBTERM), GPIO_FN(EXTLP), GPIO_FN(IDIN), + GPIO_FN(SCIFA5_CTS), GPIO_FN(MFG0_IN1), + GPIO_FN(SCIFA5_RTS), GPIO_FN(MFG0_IN2), + GPIO_FN(SCIFA5_RXD), + GPIO_FN(SCIFA5_TXD), + GPIO_FN(SCIFA5_SCK), GPIO_FN(MFG0_OUT1), + GPIO_FN(A0_EA0), GPIO_FN(BS), + GPIO_FN(A14_EA14), GPIO_FN(PORT102_KEYOUT0), + GPIO_FN(A15_EA15), GPIO_FN(PORT103_KEYOUT1), GPIO_FN(DV_CLKOL), + GPIO_FN(A16_EA16), GPIO_FN(PORT104_KEYOUT2), + GPIO_FN(DV_VSYNCL), GPIO_FN(MSIOF0_SS1), + GPIO_FN(A17_EA17), GPIO_FN(PORT105_KEYOUT3), + GPIO_FN(DV_HSYNCL), GPIO_FN(MSIOF0_TSYNC), + GPIO_FN(A18_EA18), GPIO_FN(PORT106_KEYOUT4), + GPIO_FN(DV_DL0), GPIO_FN(MSIOF0_TSCK), + GPIO_FN(A19_EA19), GPIO_FN(PORT107_KEYOUT5), + GPIO_FN(DV_DL1), GPIO_FN(MSIOF0_TXD), + GPIO_FN(A20_EA20), GPIO_FN(PORT108_KEYIN0), + GPIO_FN(DV_DL2), GPIO_FN(MSIOF0_RSCK), + GPIO_FN(A21_EA21), GPIO_FN(PORT109_KEYIN1), + GPIO_FN(DV_DL3), GPIO_FN(MSIOF0_RSYNC), + GPIO_FN(A22_EA22), GPIO_FN(PORT110_KEYIN2), + GPIO_FN(DV_DL4), GPIO_FN(MSIOF0_MCK0), + GPIO_FN(A23_EA23), GPIO_FN(PORT111_KEYIN3), + GPIO_FN(DV_DL5), GPIO_FN(MSIOF0_MCK1), + GPIO_FN(A24_EA24), GPIO_FN(PORT112_KEYIN4), + GPIO_FN(DV_DL6), GPIO_FN(MSIOF0_RXD), + GPIO_FN(A25_EA25), GPIO_FN(PORT113_KEYIN5), + GPIO_FN(DV_DL7), GPIO_FN(MSIOF0_SS2), + GPIO_FN(A26), GPIO_FN(PORT113_KEYIN6), GPIO_FN(DV_CLKIL), + GPIO_FN(D0_ED0_NAF0), GPIO_FN(D1_ED1_NAF1), GPIO_FN(D2_ED2_NAF2), + GPIO_FN(D3_ED3_NAF3), GPIO_FN(D4_ED4_NAF4), GPIO_FN(D5_ED5_NAF5), + GPIO_FN(D6_ED6_NAF6), GPIO_FN(D7_ED7_NAF7), GPIO_FN(D8_ED8_NAF8), + GPIO_FN(D9_ED9_NAF9), GPIO_FN(D10_ED10_NAF10), GPIO_FN(D11_ED11_NAF11), + GPIO_FN(D12_ED12_NAF12), GPIO_FN(D13_ED13_NAF13), + GPIO_FN(D14_ED14_NAF14), GPIO_FN(D15_ED15_NAF15), + GPIO_FN(CS4), GPIO_FN(CS5A), GPIO_FN(CS5B), GPIO_FN(FCE1), + GPIO_FN(CS6B), GPIO_FN(XCS2), GPIO_FN(FCE0), GPIO_FN(CS6A), + GPIO_FN(DACK0), GPIO_FN(WAIT), GPIO_FN(DREQ0), GPIO_FN(RD_XRD), + GPIO_FN(A27), GPIO_FN(RDWR_XWE), GPIO_FN(WE0_XWR0_FWE), + GPIO_FN(WE1_XWR1), GPIO_FN(FRB), GPIO_FN(CKO), + GPIO_FN(NBRSTOUT), GPIO_FN(NBRST), + + /* 49-4 (FN) */ + GPIO_FN(RFSPO0), GPIO_FN(PORT146_VIO_CKO2), GPIO_FN(TSTMD), + GPIO_FN(VIO_VD), GPIO_FN(VIO_HD), + GPIO_FN(VIO_D0), GPIO_FN(VIO_D1), GPIO_FN(VIO_D2), + GPIO_FN(VIO_D3), GPIO_FN(VIO_D4), GPIO_FN(VIO_D5), + GPIO_FN(VIO_D6), GPIO_FN(VIO_D7), GPIO_FN(VIO_D8), + GPIO_FN(VIO_D9), GPIO_FN(VIO_D10), GPIO_FN(VIO_D11), + GPIO_FN(VIO_D12), GPIO_FN(VIO_D13), GPIO_FN(VIO_D14), + GPIO_FN(VIO_D15), GPIO_FN(VIO_CLK), GPIO_FN(VIO_FIELD), + GPIO_FN(VIO_CKO), + GPIO_FN(MFG3_IN1), GPIO_FN(MFG3_IN2), + GPIO_FN(M9_SLCD_A01), GPIO_FN(MFG3_OUT1), GPIO_FN(TPU0TO0), + GPIO_FN(M10_SLCD_CK1), GPIO_FN(MFG4_IN1), GPIO_FN(TPU0TO1), + GPIO_FN(M11_SLCD_SO1), GPIO_FN(MFG4_IN2), GPIO_FN(TPU0TO2), + GPIO_FN(M12_SLCD_CE1), GPIO_FN(MFG4_OUT1), GPIO_FN(TPU0TO3), + GPIO_FN(LCDD0), GPIO_FN(PORT175_KEYOUT0), GPIO_FN(DV_D0), + GPIO_FN(SIUCKA), GPIO_FN(MFG0_OUT2), + GPIO_FN(LCDD1), GPIO_FN(PORT176_KEYOUT1), GPIO_FN(DV_D1), + GPIO_FN(SIUAOLR), GPIO_FN(BBIF2_TSYNC1), + GPIO_FN(LCDD2), GPIO_FN(PORT177_KEYOUT2), GPIO_FN(DV_D2), + GPIO_FN(SIUAOBT), GPIO_FN(BBIF2_TSCK1), + GPIO_FN(LCDD3), GPIO_FN(PORT178_KEYOUT3), GPIO_FN(DV_D3), + GPIO_FN(SIUAOSLD), GPIO_FN(BBIF2_TXD1), + GPIO_FN(LCDD4), GPIO_FN(PORT179_KEYOUT4), GPIO_FN(DV_D4), + GPIO_FN(SIUAISPD), GPIO_FN(MFG1_OUT2), + GPIO_FN(LCDD5), GPIO_FN(PORT180_KEYOUT5), GPIO_FN(DV_D5), + GPIO_FN(SIUAILR), GPIO_FN(MFG2_OUT2), + GPIO_FN(LCDD6), GPIO_FN(DV_D6), + GPIO_FN(SIUAIBT), GPIO_FN(MFG3_OUT2), GPIO_FN(XWR2), + GPIO_FN(LCDD7), GPIO_FN(DV_D7), + GPIO_FN(SIUAISLD), GPIO_FN(MFG4_OUT2), GPIO_FN(XWR3), + GPIO_FN(LCDD8), GPIO_FN(DV_D8), GPIO_FN(D16), GPIO_FN(ED16), + GPIO_FN(LCDD9), GPIO_FN(DV_D9), GPIO_FN(D17), GPIO_FN(ED17), + GPIO_FN(LCDD10), GPIO_FN(DV_D10), GPIO_FN(D18), GPIO_FN(ED18), + GPIO_FN(LCDD11), GPIO_FN(DV_D11), GPIO_FN(D19), GPIO_FN(ED19), + GPIO_FN(LCDD12), GPIO_FN(DV_D12), GPIO_FN(D20), GPIO_FN(ED20), + GPIO_FN(LCDD13), GPIO_FN(DV_D13), GPIO_FN(D21), GPIO_FN(ED21), + GPIO_FN(LCDD14), GPIO_FN(DV_D14), GPIO_FN(D22), GPIO_FN(ED22), + GPIO_FN(LCDD15), GPIO_FN(DV_D15), GPIO_FN(D23), GPIO_FN(ED23), + GPIO_FN(LCDD16), GPIO_FN(DV_HSYNC), GPIO_FN(D24), GPIO_FN(ED24), + GPIO_FN(LCDD17), GPIO_FN(DV_VSYNC), GPIO_FN(D25), GPIO_FN(ED25), + GPIO_FN(LCDD18), GPIO_FN(DREQ2), GPIO_FN(MSIOF0L_TSCK), + GPIO_FN(D26), GPIO_FN(ED26), + GPIO_FN(LCDD19), GPIO_FN(MSIOF0L_TSYNC), + GPIO_FN(D27), GPIO_FN(ED27), + GPIO_FN(LCDD20), GPIO_FN(TS_SPSYNC1), GPIO_FN(MSIOF0L_MCK0), + GPIO_FN(D28), GPIO_FN(ED28), + GPIO_FN(LCDD21), GPIO_FN(TS_SDAT1), GPIO_FN(MSIOF0L_MCK1), + GPIO_FN(D29), GPIO_FN(ED29), + GPIO_FN(LCDD22), GPIO_FN(TS_SDEN1), GPIO_FN(MSIOF0L_SS1), + GPIO_FN(D30), GPIO_FN(ED30), + GPIO_FN(LCDD23), GPIO_FN(TS_SCK1), GPIO_FN(MSIOF0L_SS2), + GPIO_FN(D31), GPIO_FN(ED31), + GPIO_FN(LCDDCK), GPIO_FN(LCDWR), GPIO_FN(DV_CKO), GPIO_FN(SIUAOSPD), + GPIO_FN(LCDRD), GPIO_FN(DACK2), GPIO_FN(MSIOF0L_RSYNC), + + /* 49-5 (FN) */ + GPIO_FN(LCDHSYN), GPIO_FN(LCDCS), GPIO_FN(LCDCS2), GPIO_FN(DACK3), + GPIO_FN(LCDDISP), GPIO_FN(LCDRS), GPIO_FN(DREQ3), GPIO_FN(MSIOF0L_RSCK), + GPIO_FN(LCDCSYN), GPIO_FN(LCDCSYN2), GPIO_FN(DV_CKI), + GPIO_FN(LCDLCLK), GPIO_FN(DREQ1), GPIO_FN(MSIOF0L_RXD), + GPIO_FN(LCDDON), GPIO_FN(LCDDON2), GPIO_FN(DACK1), GPIO_FN(MSIOF0L_TXD), + GPIO_FN(VIO_DR0), GPIO_FN(VIO_DR1), GPIO_FN(VIO_DR2), GPIO_FN(VIO_DR3), + GPIO_FN(VIO_DR4), GPIO_FN(VIO_DR5), GPIO_FN(VIO_DR6), GPIO_FN(VIO_DR7), + GPIO_FN(VIO_VDR), GPIO_FN(VIO_HDR), + GPIO_FN(VIO_CLKR), GPIO_FN(VIO_CKOR), + GPIO_FN(SCIFA1_TXD), GPIO_FN(GPS_PGFA0), + GPIO_FN(SCIFA1_SCK), GPIO_FN(GPS_PGFA1), + GPIO_FN(SCIFA1_RTS), GPIO_FN(GPS_EPPSINMON), + GPIO_FN(SCIFA1_RXD), GPIO_FN(SCIFA1_CTS), + GPIO_FN(MSIOF1_TXD), GPIO_FN(SCIFA1_TXD2), GPIO_FN(GPS_TXD), + GPIO_FN(MSIOF1_TSYNC), GPIO_FN(SCIFA1_CTS2), GPIO_FN(I2C_SDA2), + GPIO_FN(MSIOF1_TSCK), GPIO_FN(SCIFA1_SCK2), + GPIO_FN(MSIOF1_RXD), GPIO_FN(SCIFA1_RXD2), GPIO_FN(GPS_RXD), + GPIO_FN(MSIOF1_RSCK), GPIO_FN(SCIFA1_RTS2), + GPIO_FN(MSIOF1_RSYNC), GPIO_FN(I2C_SCL2), + GPIO_FN(MSIOF1_MCK0), GPIO_FN(MSIOF1_MCK1), + GPIO_FN(MSIOF1_SS1), GPIO_FN(EDBGREQ3), + GPIO_FN(MSIOF1_SS2), + GPIO_FN(PORT236_IROUT), GPIO_FN(IRDA_OUT), + GPIO_FN(IRDA_IN), GPIO_FN(IRDA_FIRSEL), + GPIO_FN(TPU1TO0), GPIO_FN(TS_SPSYNC3), + GPIO_FN(TPU1TO1), GPIO_FN(TS_SDAT3), + GPIO_FN(TPU1TO2), GPIO_FN(TS_SDEN3), GPIO_FN(PORT241_MSIOF2_SS1), + GPIO_FN(TPU1TO3), GPIO_FN(PORT242_MSIOF2_TSCK), + GPIO_FN(M13_BSW), GPIO_FN(PORT243_MSIOF2_TSYNC), + GPIO_FN(M14_GSW), GPIO_FN(PORT244_MSIOF2_TXD), + GPIO_FN(PORT245_IROUT), GPIO_FN(M15_RSW), + GPIO_FN(SOUT3), GPIO_FN(SCIFA2_TXD1), + GPIO_FN(SIN3), GPIO_FN(SCIFA2_RXD1), + GPIO_FN(XRTS3), GPIO_FN(SCIFA2_RTS1), GPIO_FN(PORT248_MSIOF2_SS2), + GPIO_FN(XCTS3), GPIO_FN(SCIFA2_CTS1), GPIO_FN(PORT249_MSIOF2_RXD), + GPIO_FN(DINT), GPIO_FN(SCIFA2_SCK1), GPIO_FN(TS_SCK3), + GPIO_FN(SDHICLK0), GPIO_FN(TCK2), + GPIO_FN(SDHICD0), + GPIO_FN(SDHID0_0), GPIO_FN(TMS2), + GPIO_FN(SDHID0_1), GPIO_FN(TDO2), + GPIO_FN(SDHID0_2), GPIO_FN(TDI2), + GPIO_FN(SDHID0_3), GPIO_FN(RTCK2), + + /* 49-6 (FN) */ + GPIO_FN(SDHICMD0), GPIO_FN(TRST2), + GPIO_FN(SDHIWP0), GPIO_FN(EDBGREQ2), + GPIO_FN(SDHICLK1), GPIO_FN(TCK3), + GPIO_FN(SDHID1_0), GPIO_FN(M11_SLCD_SO2), + GPIO_FN(TS_SPSYNC2), GPIO_FN(TMS3), + GPIO_FN(SDHID1_1), GPIO_FN(M9_SLCD_AO2), + GPIO_FN(TS_SDAT2), GPIO_FN(TDO3), + GPIO_FN(SDHID1_2), GPIO_FN(M10_SLCD_CK2), + GPIO_FN(TS_SDEN2), GPIO_FN(TDI3), + GPIO_FN(SDHID1_3), GPIO_FN(M12_SLCD_CE2), + GPIO_FN(TS_SCK2), GPIO_FN(RTCK3), + GPIO_FN(SDHICMD1), GPIO_FN(TRST3), + GPIO_FN(SDHICLK2), GPIO_FN(SCIFB_SCK), + GPIO_FN(SDHID2_0), GPIO_FN(SCIFB_TXD), + GPIO_FN(SDHID2_1), GPIO_FN(SCIFB_CTS), + GPIO_FN(SDHID2_2), GPIO_FN(SCIFB_RXD), + GPIO_FN(SDHID2_3), GPIO_FN(SCIFB_RTS), + GPIO_FN(SDHICMD2), + GPIO_FN(RESETOUTS), + GPIO_FN(DIVLOCK), +}; + +/* helper for top 4 bits in PORTnCR */ +#define PCRH(in, in_pd, in_pu, out) \ + 0, (out), (in), 0, \ + 0, 0, 0, 0, \ + 0, 0, (in_pd), 0, \ + 0, 0, (in_pu), 0 + +#define PORTCR(nr, reg) \ + { PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) { \ + PCRH(PORT##nr##_IN, PORT##nr##_IN_PD, \ + PORT##nr##_IN_PU, PORT##nr##_OUT), \ + PORT##nr##_FN0, PORT##nr##_FN1, PORT##nr##_FN2, \ + PORT##nr##_FN3, PORT##nr##_FN4, PORT##nr##_FN5, \ + PORT##nr##_FN6, PORT##nr##_FN7 } \ + } + +static struct pinmux_cfg_reg pinmux_config_regs[] = { + PORTCR(0, 0xe6050000), /* PORT0CR */ + PORTCR(1, 0xe6050001), /* PORT1CR */ + PORTCR(2, 0xe6050002), /* PORT2CR */ + PORTCR(3, 0xe6050003), /* PORT3CR */ + PORTCR(4, 0xe6050004), /* PORT4CR */ + PORTCR(5, 0xe6050005), /* PORT5CR */ + PORTCR(6, 0xe6050006), /* PORT6CR */ + PORTCR(7, 0xe6050007), /* PORT7CR */ + PORTCR(8, 0xe6050008), /* PORT8CR */ + PORTCR(9, 0xe6050009), /* PORT9CR */ + + PORTCR(10, 0xe605000a), /* PORT10CR */ + PORTCR(11, 0xe605000b), /* PORT11CR */ + PORTCR(12, 0xe605000c), /* PORT12CR */ + PORTCR(13, 0xe605000d), /* PORT13CR */ + PORTCR(14, 0xe605000e), /* PORT14CR */ + PORTCR(15, 0xe605000f), /* PORT15CR */ + PORTCR(16, 0xe6050010), /* PORT16CR */ + PORTCR(17, 0xe6050011), /* PORT17CR */ + PORTCR(18, 0xe6050012), /* PORT18CR */ + PORTCR(19, 0xe6050013), /* PORT19CR */ + + PORTCR(20, 0xe6050014), /* PORT20CR */ + PORTCR(21, 0xe6050015), /* PORT21CR */ + PORTCR(22, 0xe6050016), /* PORT22CR */ + PORTCR(23, 0xe6050017), /* PORT23CR */ + PORTCR(24, 0xe6050018), /* PORT24CR */ + PORTCR(25, 0xe6050019), /* PORT25CR */ + PORTCR(26, 0xe605001a), /* PORT26CR */ + PORTCR(27, 0xe605001b), /* PORT27CR */ + PORTCR(28, 0xe605001c), /* PORT28CR */ + PORTCR(29, 0xe605001d), /* PORT29CR */ + + PORTCR(30, 0xe605001e), /* PORT30CR */ + PORTCR(31, 0xe605001f), /* PORT31CR */ + PORTCR(32, 0xe6050020), /* PORT32CR */ + PORTCR(33, 0xe6050021), /* PORT33CR */ + PORTCR(34, 0xe6050022), /* PORT34CR */ + PORTCR(35, 0xe6050023), /* PORT35CR */ + PORTCR(36, 0xe6050024), /* PORT36CR */ + PORTCR(37, 0xe6050025), /* PORT37CR */ + PORTCR(38, 0xe6050026), /* PORT38CR */ + PORTCR(39, 0xe6050027), /* PORT39CR */ + + PORTCR(40, 0xe6050028), /* PORT40CR */ + PORTCR(41, 0xe6050029), /* PORT41CR */ + PORTCR(42, 0xe605002a), /* PORT42CR */ + PORTCR(43, 0xe605002b), /* PORT43CR */ + PORTCR(44, 0xe605002c), /* PORT44CR */ + PORTCR(45, 0xe605002d), /* PORT45CR */ + PORTCR(46, 0xe605002e), /* PORT46CR */ + PORTCR(47, 0xe605002f), /* PORT47CR */ + PORTCR(48, 0xe6050030), /* PORT48CR */ + PORTCR(49, 0xe6050031), /* PORT49CR */ + + PORTCR(50, 0xe6050032), /* PORT50CR */ + PORTCR(51, 0xe6050033), /* PORT51CR */ + PORTCR(52, 0xe6050034), /* PORT52CR */ + PORTCR(53, 0xe6050035), /* PORT53CR */ + PORTCR(54, 0xe6050036), /* PORT54CR */ + PORTCR(55, 0xe6050037), /* PORT55CR */ + PORTCR(56, 0xe6050038), /* PORT56CR */ + PORTCR(57, 0xe6050039), /* PORT57CR */ + PORTCR(58, 0xe605003a), /* PORT58CR */ + PORTCR(59, 0xe605003b), /* PORT59CR */ + + PORTCR(60, 0xe605003c), /* PORT60CR */ + PORTCR(61, 0xe605003d), /* PORT61CR */ + PORTCR(62, 0xe605003e), /* PORT62CR */ + PORTCR(63, 0xe605003f), /* PORT63CR */ + PORTCR(64, 0xe6050040), /* PORT64CR */ + PORTCR(65, 0xe6050041), /* PORT65CR */ + PORTCR(66, 0xe6050042), /* PORT66CR */ + PORTCR(67, 0xe6050043), /* PORT67CR */ + PORTCR(68, 0xe6050044), /* PORT68CR */ + PORTCR(69, 0xe6050045), /* PORT69CR */ + + PORTCR(70, 0xe6050046), /* PORT70CR */ + PORTCR(71, 0xe6050047), /* PORT71CR */ + PORTCR(72, 0xe6050048), /* PORT72CR */ + PORTCR(73, 0xe6050049), /* PORT73CR */ + PORTCR(74, 0xe605004a), /* PORT74CR */ + PORTCR(75, 0xe605004b), /* PORT75CR */ + PORTCR(76, 0xe605004c), /* PORT76CR */ + PORTCR(77, 0xe605004d), /* PORT77CR */ + PORTCR(78, 0xe605004e), /* PORT78CR */ + PORTCR(79, 0xe605004f), /* PORT79CR */ + + PORTCR(80, 0xe6050050), /* PORT80CR */ + PORTCR(81, 0xe6050051), /* PORT81CR */ + PORTCR(82, 0xe6050052), /* PORT82CR */ + PORTCR(83, 0xe6050053), /* PORT83CR */ + PORTCR(84, 0xe6050054), /* PORT84CR */ + PORTCR(85, 0xe6050055), /* PORT85CR */ + PORTCR(86, 0xe6050056), /* PORT86CR */ + PORTCR(87, 0xe6050057), /* PORT87CR */ + PORTCR(88, 0xe6051058), /* PORT88CR */ + PORTCR(89, 0xe6051059), /* PORT89CR */ + + PORTCR(90, 0xe605105a), /* PORT90CR */ + PORTCR(91, 0xe605105b), /* PORT91CR */ + PORTCR(92, 0xe605105c), /* PORT92CR */ + PORTCR(93, 0xe605105d), /* PORT93CR */ + PORTCR(94, 0xe605105e), /* PORT94CR */ + PORTCR(95, 0xe605105f), /* PORT95CR */ + PORTCR(96, 0xe6051060), /* PORT96CR */ + PORTCR(97, 0xe6051061), /* PORT97CR */ + PORTCR(98, 0xe6051062), /* PORT98CR */ + PORTCR(99, 0xe6051063), /* PORT99CR */ + + PORTCR(100, 0xe6051064), /* PORT100CR */ + PORTCR(101, 0xe6051065), /* PORT101CR */ + PORTCR(102, 0xe6051066), /* PORT102CR */ + PORTCR(103, 0xe6051067), /* PORT103CR */ + PORTCR(104, 0xe6051068), /* PORT104CR */ + PORTCR(105, 0xe6051069), /* PORT105CR */ + PORTCR(106, 0xe605106a), /* PORT106CR */ + PORTCR(107, 0xe605106b), /* PORT107CR */ + PORTCR(108, 0xe605106c), /* PORT108CR */ + PORTCR(109, 0xe605106d), /* PORT109CR */ + + PORTCR(110, 0xe605106e), /* PORT110CR */ + PORTCR(111, 0xe605106f), /* PORT111CR */ + PORTCR(112, 0xe6051070), /* PORT112CR */ + PORTCR(113, 0xe6051071), /* PORT113CR */ + PORTCR(114, 0xe6051072), /* PORT114CR */ + PORTCR(115, 0xe6051073), /* PORT115CR */ + PORTCR(116, 0xe6051074), /* PORT116CR */ + PORTCR(117, 0xe6051075), /* PORT117CR */ + PORTCR(118, 0xe6051076), /* PORT118CR */ + PORTCR(119, 0xe6051077), /* PORT119CR */ + + PORTCR(120, 0xe6051078), /* PORT120CR */ + PORTCR(121, 0xe6051079), /* PORT121CR */ + PORTCR(122, 0xe605107a), /* PORT122CR */ + PORTCR(123, 0xe605107b), /* PORT123CR */ + PORTCR(124, 0xe605107c), /* PORT124CR */ + PORTCR(125, 0xe605107d), /* PORT125CR */ + PORTCR(126, 0xe605107e), /* PORT126CR */ + PORTCR(127, 0xe605107f), /* PORT127CR */ + PORTCR(128, 0xe6051080), /* PORT128CR */ + PORTCR(129, 0xe6051081), /* PORT129CR */ + + PORTCR(130, 0xe6051082), /* PORT130CR */ + PORTCR(131, 0xe6051083), /* PORT131CR */ + PORTCR(132, 0xe6051084), /* PORT132CR */ + PORTCR(133, 0xe6051085), /* PORT133CR */ + PORTCR(134, 0xe6051086), /* PORT134CR */ + PORTCR(135, 0xe6051087), /* PORT135CR */ + PORTCR(136, 0xe6051088), /* PORT136CR */ + PORTCR(137, 0xe6051089), /* PORT137CR */ + PORTCR(138, 0xe605108a), /* PORT138CR */ + PORTCR(139, 0xe605108b), /* PORT139CR */ + + PORTCR(140, 0xe605108c), /* PORT140CR */ + PORTCR(141, 0xe605108d), /* PORT141CR */ + PORTCR(142, 0xe605108e), /* PORT142CR */ + PORTCR(143, 0xe605108f), /* PORT143CR */ + PORTCR(144, 0xe6051090), /* PORT144CR */ + PORTCR(145, 0xe6051091), /* PORT145CR */ + PORTCR(146, 0xe6051092), /* PORT146CR */ + PORTCR(147, 0xe6051093), /* PORT147CR */ + PORTCR(148, 0xe6051094), /* PORT148CR */ + PORTCR(149, 0xe6051095), /* PORT149CR */ + + PORTCR(150, 0xe6051096), /* PORT150CR */ + PORTCR(151, 0xe6051097), /* PORT151CR */ + PORTCR(152, 0xe6051098), /* PORT152CR */ + PORTCR(153, 0xe6051099), /* PORT153CR */ + PORTCR(154, 0xe605109a), /* PORT154CR */ + PORTCR(155, 0xe605109b), /* PORT155CR */ + PORTCR(156, 0xe605109c), /* PORT156CR */ + PORTCR(157, 0xe605109d), /* PORT157CR */ + PORTCR(158, 0xe605109e), /* PORT158CR */ + PORTCR(159, 0xe605109f), /* PORT159CR */ + + PORTCR(160, 0xe60510a0), /* PORT160CR */ + PORTCR(161, 0xe60510a1), /* PORT161CR */ + PORTCR(162, 0xe60510a2), /* PORT162CR */ + PORTCR(163, 0xe60510a3), /* PORT163CR */ + PORTCR(164, 0xe60510a4), /* PORT164CR */ + PORTCR(165, 0xe60510a5), /* PORT165CR */ + PORTCR(166, 0xe60510a6), /* PORT166CR */ + PORTCR(167, 0xe60510a7), /* PORT167CR */ + PORTCR(168, 0xe60510a8), /* PORT168CR */ + PORTCR(169, 0xe60510a9), /* PORT169CR */ + + PORTCR(170, 0xe60510aa), /* PORT170CR */ + PORTCR(171, 0xe60510ab), /* PORT171CR */ + PORTCR(172, 0xe60510ac), /* PORT172CR */ + PORTCR(173, 0xe60510ad), /* PORT173CR */ + PORTCR(174, 0xe60510ae), /* PORT174CR */ + PORTCR(175, 0xe60520af), /* PORT175CR */ + PORTCR(176, 0xe60520b0), /* PORT176CR */ + PORTCR(177, 0xe60520b1), /* PORT177CR */ + PORTCR(178, 0xe60520b2), /* PORT178CR */ + PORTCR(179, 0xe60520b3), /* PORT179CR */ + + PORTCR(180, 0xe60520b4), /* PORT180CR */ + PORTCR(181, 0xe60520b5), /* PORT181CR */ + PORTCR(182, 0xe60520b6), /* PORT182CR */ + PORTCR(183, 0xe60520b7), /* PORT183CR */ + PORTCR(184, 0xe60520b8), /* PORT184CR */ + PORTCR(185, 0xe60520b9), /* PORT185CR */ + PORTCR(186, 0xe60520ba), /* PORT186CR */ + PORTCR(187, 0xe60520bb), /* PORT187CR */ + PORTCR(188, 0xe60520bc), /* PORT188CR */ + PORTCR(189, 0xe60520bd), /* PORT189CR */ + + PORTCR(190, 0xe60520be), /* PORT190CR */ + PORTCR(191, 0xe60520bf), /* PORT191CR */ + PORTCR(192, 0xe60520c0), /* PORT192CR */ + PORTCR(193, 0xe60520c1), /* PORT193CR */ + PORTCR(194, 0xe60520c2), /* PORT194CR */ + PORTCR(195, 0xe60520c3), /* PORT195CR */ + PORTCR(196, 0xe60520c4), /* PORT196CR */ + PORTCR(197, 0xe60520c5), /* PORT197CR */ + PORTCR(198, 0xe60520c6), /* PORT198CR */ + PORTCR(199, 0xe60520c7), /* PORT199CR */ + + PORTCR(200, 0xe60520c8), /* PORT200CR */ + PORTCR(201, 0xe60520c9), /* PORT201CR */ + PORTCR(202, 0xe60520ca), /* PORT202CR */ + PORTCR(203, 0xe60520cb), /* PORT203CR */ + PORTCR(204, 0xe60520cc), /* PORT204CR */ + PORTCR(205, 0xe60520cd), /* PORT205CR */ + PORTCR(206, 0xe60520ce), /* PORT206CR */ + PORTCR(207, 0xe60520cf), /* PORT207CR */ + PORTCR(208, 0xe60520d0), /* PORT208CR */ + PORTCR(209, 0xe60520d1), /* PORT209CR */ + + PORTCR(210, 0xe60520d2), /* PORT210CR */ + PORTCR(211, 0xe60520d3), /* PORT211CR */ + PORTCR(212, 0xe60520d4), /* PORT212CR */ + PORTCR(213, 0xe60520d5), /* PORT213CR */ + PORTCR(214, 0xe60520d6), /* PORT214CR */ + PORTCR(215, 0xe60520d7), /* PORT215CR */ + PORTCR(216, 0xe60520d8), /* PORT216CR */ + PORTCR(217, 0xe60520d9), /* PORT217CR */ + PORTCR(218, 0xe60520da), /* PORT218CR */ + PORTCR(219, 0xe60520db), /* PORT219CR */ + + PORTCR(220, 0xe60520dc), /* PORT220CR */ + PORTCR(221, 0xe60520dd), /* PORT221CR */ + PORTCR(222, 0xe60520de), /* PORT222CR */ + PORTCR(223, 0xe60520df), /* PORT223CR */ + PORTCR(224, 0xe60520e0), /* PORT224CR */ + PORTCR(225, 0xe60520e1), /* PORT225CR */ + PORTCR(226, 0xe60520e2), /* PORT226CR */ + PORTCR(227, 0xe60520e3), /* PORT227CR */ + PORTCR(228, 0xe60520e4), /* PORT228CR */ + PORTCR(229, 0xe60520e5), /* PORT229CR */ + + PORTCR(230, 0xe60520e6), /* PORT230CR */ + PORTCR(231, 0xe60520e7), /* PORT231CR */ + PORTCR(232, 0xe60520e8), /* PORT232CR */ + PORTCR(233, 0xe60520e9), /* PORT233CR */ + PORTCR(234, 0xe60520ea), /* PORT234CR */ + PORTCR(235, 0xe60520eb), /* PORT235CR */ + PORTCR(236, 0xe60530ec), /* PORT236CR */ + PORTCR(237, 0xe60530ed), /* PORT237CR */ + PORTCR(238, 0xe60530ee), /* PORT238CR */ + PORTCR(239, 0xe60530ef), /* PORT239CR */ + + PORTCR(240, 0xe60530f0), /* PORT240CR */ + PORTCR(241, 0xe60530f1), /* PORT241CR */ + PORTCR(242, 0xe60530f2), /* PORT242CR */ + PORTCR(243, 0xe60530f3), /* PORT243CR */ + PORTCR(244, 0xe60530f4), /* PORT244CR */ + PORTCR(245, 0xe60530f5), /* PORT245CR */ + PORTCR(246, 0xe60530f6), /* PORT246CR */ + PORTCR(247, 0xe60530f7), /* PORT247CR */ + PORTCR(248, 0xe60530f8), /* PORT248CR */ + PORTCR(249, 0xe60530f9), /* PORT249CR */ + + PORTCR(250, 0xe60530fa), /* PORT250CR */ + PORTCR(251, 0xe60530fb), /* PORT251CR */ + PORTCR(252, 0xe60530fc), /* PORT252CR */ + PORTCR(253, 0xe60530fd), /* PORT253CR */ + PORTCR(254, 0xe60530fe), /* PORT254CR */ + PORTCR(255, 0xe60530ff), /* PORT255CR */ + PORTCR(256, 0xe6053100), /* PORT256CR */ + PORTCR(257, 0xe6053101), /* PORT257CR */ + PORTCR(258, 0xe6053102), /* PORT258CR */ + PORTCR(259, 0xe6053103), /* PORT259CR */ + + PORTCR(260, 0xe6053104), /* PORT260CR */ + PORTCR(261, 0xe6053105), /* PORT261CR */ + PORTCR(262, 0xe6053106), /* PORT262CR */ + PORTCR(263, 0xe6053107), /* PORT263CR */ + PORTCR(264, 0xe6053108), /* PORT264CR */ + PORTCR(265, 0xe6053109), /* PORT265CR */ + PORTCR(266, 0xe605310a), /* PORT266CR */ + PORTCR(267, 0xe605310b), /* PORT267CR */ + PORTCR(268, 0xe605310c), /* PORT268CR */ + PORTCR(269, 0xe605310d), /* PORT269CR */ + + PORTCR(270, 0xe605310e), /* PORT270CR */ + PORTCR(271, 0xe605310f), /* PORT271CR */ + PORTCR(272, 0xe6053110), /* PORT272CR */ + + { PINMUX_CFG_REG("MSELBCR", 0xe6058024, 32, 1) { + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, + 0, 0, + 0, 0, + 0, 0, + 0, 0, + MSELBCR_MSEL2_0, MSELBCR_MSEL2_1, + 0, 0, + 0, 0 } + }, + { }, +}; + +static struct pinmux_data_reg pinmux_data_regs[] = { + { PINMUX_DATA_REG("PORTL031_000DR", 0xe6054000, 32) { + PORT31_DATA, PORT30_DATA, PORT29_DATA, PORT28_DATA, + PORT27_DATA, PORT26_DATA, PORT25_DATA, PORT24_DATA, + PORT23_DATA, PORT22_DATA, PORT21_DATA, PORT20_DATA, + PORT19_DATA, PORT18_DATA, PORT17_DATA, PORT16_DATA, + PORT15_DATA, PORT14_DATA, PORT13_DATA, PORT12_DATA, + PORT11_DATA, PORT10_DATA, PORT9_DATA, PORT8_DATA, + PORT7_DATA, PORT6_DATA, PORT5_DATA, PORT4_DATA, + PORT3_DATA, PORT2_DATA, PORT1_DATA, PORT0_DATA } + }, + { PINMUX_DATA_REG("PORTL063_032DR", 0xe6054004, 32) { + PORT63_DATA, PORT62_DATA, PORT61_DATA, PORT60_DATA, + PORT59_DATA, PORT58_DATA, PORT57_DATA, PORT56_DATA, + PORT55_DATA, PORT54_DATA, PORT53_DATA, PORT52_DATA, + PORT51_DATA, PORT50_DATA, PORT49_DATA, PORT48_DATA, + PORT47_DATA, PORT46_DATA, PORT45_DATA, PORT44_DATA, + PORT43_DATA, PORT42_DATA, PORT41_DATA, PORT40_DATA, + PORT39_DATA, PORT38_DATA, PORT37_DATA, PORT36_DATA, + PORT35_DATA, PORT34_DATA, PORT33_DATA, PORT32_DATA } + }, + { PINMUX_DATA_REG("PORTL095_064DR", 0xe6054008, 32) { + PORT95_DATA, PORT94_DATA, PORT93_DATA, PORT92_DATA, + PORT91_DATA, PORT90_DATA, PORT89_DATA, PORT88_DATA, + PORT87_DATA, PORT86_DATA, PORT85_DATA, PORT84_DATA, + PORT83_DATA, PORT82_DATA, PORT81_DATA, PORT80_DATA, + PORT79_DATA, PORT78_DATA, PORT77_DATA, PORT76_DATA, + PORT75_DATA, PORT74_DATA, PORT73_DATA, PORT72_DATA, + PORT71_DATA, PORT70_DATA, PORT69_DATA, PORT68_DATA, + PORT67_DATA, PORT66_DATA, PORT65_DATA, PORT64_DATA } + }, + { PINMUX_DATA_REG("PORTD127_096DR", 0xe6055004, 32) { + PORT127_DATA, PORT126_DATA, PORT125_DATA, PORT124_DATA, + PORT123_DATA, PORT122_DATA, PORT121_DATA, PORT120_DATA, + PORT119_DATA, PORT118_DATA, PORT117_DATA, PORT116_DATA, + PORT115_DATA, PORT114_DATA, PORT113_DATA, PORT112_DATA, + PORT111_DATA, PORT110_DATA, PORT109_DATA, PORT108_DATA, + PORT107_DATA, PORT106_DATA, PORT105_DATA, PORT104_DATA, + PORT103_DATA, PORT102_DATA, PORT101_DATA, PORT100_DATA, + PORT99_DATA, PORT98_DATA, PORT97_DATA, PORT96_DATA } + }, + { PINMUX_DATA_REG("PORTD159_128DR", 0xe6055008, 32) { + PORT159_DATA, PORT158_DATA, PORT157_DATA, PORT156_DATA, + PORT155_DATA, PORT154_DATA, PORT153_DATA, PORT152_DATA, + PORT151_DATA, PORT150_DATA, PORT149_DATA, PORT148_DATA, + PORT147_DATA, PORT146_DATA, PORT145_DATA, PORT144_DATA, + PORT143_DATA, PORT142_DATA, PORT141_DATA, PORT140_DATA, + PORT139_DATA, PORT138_DATA, PORT137_DATA, PORT136_DATA, + PORT135_DATA, PORT134_DATA, PORT133_DATA, PORT132_DATA, + PORT131_DATA, PORT130_DATA, PORT129_DATA, PORT128_DATA } + }, + { PINMUX_DATA_REG("PORTR191_160DR", 0xe6056000, 32) { + PORT191_DATA, PORT190_DATA, PORT189_DATA, PORT188_DATA, + PORT187_DATA, PORT186_DATA, PORT185_DATA, PORT184_DATA, + PORT183_DATA, PORT182_DATA, PORT181_DATA, PORT180_DATA, + PORT179_DATA, PORT178_DATA, PORT177_DATA, PORT176_DATA, + PORT175_DATA, PORT174_DATA, PORT173_DATA, PORT172_DATA, + PORT171_DATA, PORT170_DATA, PORT169_DATA, PORT168_DATA, + PORT167_DATA, PORT166_DATA, PORT165_DATA, PORT164_DATA, + PORT163_DATA, PORT162_DATA, PORT161_DATA, PORT160_DATA } + }, + { PINMUX_DATA_REG("PORTR223_192DR", 0xe6056004, 32) { + PORT223_DATA, PORT222_DATA, PORT221_DATA, PORT220_DATA, + PORT219_DATA, PORT218_DATA, PORT217_DATA, PORT216_DATA, + PORT215_DATA, PORT214_DATA, PORT213_DATA, PORT212_DATA, + PORT211_DATA, PORT210_DATA, PORT209_DATA, PORT208_DATA, + PORT207_DATA, PORT206_DATA, PORT205_DATA, PORT204_DATA, + PORT203_DATA, PORT202_DATA, PORT201_DATA, PORT200_DATA, + PORT199_DATA, PORT198_DATA, PORT197_DATA, PORT196_DATA, + PORT195_DATA, PORT194_DATA, PORT193_DATA, PORT192_DATA } + }, + { PINMUX_DATA_REG("PORTU255_224DR", 0xe6057000, 32) { + PORT255_DATA, PORT254_DATA, PORT253_DATA, PORT252_DATA, + PORT251_DATA, PORT250_DATA, PORT249_DATA, PORT248_DATA, + PORT247_DATA, PORT246_DATA, PORT245_DATA, PORT244_DATA, + PORT243_DATA, PORT242_DATA, PORT241_DATA, PORT240_DATA, + PORT239_DATA, PORT238_DATA, PORT237_DATA, PORT236_DATA, + PORT235_DATA, PORT234_DATA, PORT233_DATA, PORT232_DATA, + PORT231_DATA, PORT230_DATA, PORT229_DATA, PORT228_DATA, + PORT227_DATA, PORT226_DATA, PORT225_DATA, PORT224_DATA } + }, + { PINMUX_DATA_REG("PORTU287_256DR", 0xe6057004, 32) { + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, PORT272_DATA, + PORT271_DATA, PORT270_DATA, PORT269_DATA, PORT268_DATA, + PORT267_DATA, PORT266_DATA, PORT265_DATA, PORT264_DATA, + PORT263_DATA, PORT262_DATA, PORT261_DATA, PORT260_DATA, + PORT259_DATA, PORT258_DATA, PORT257_DATA, PORT256_DATA } + }, + { }, +}; + +static struct pinmux_info sh7367_pinmux_info = { + .name = "sh7367_pfc", + .reserved_id = PINMUX_RESERVED, + .data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END }, + .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END }, + .input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END }, + .input_pd = { PINMUX_INPUT_PULLDOWN_BEGIN, PINMUX_INPUT_PULLDOWN_END }, + .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END }, + .mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END }, + .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END }, + + .first_gpio = GPIO_PORT0, + .last_gpio = GPIO_FN_DIVLOCK, + + .gpios = pinmux_gpios, + .cfg_regs = pinmux_config_regs, + .data_regs = pinmux_data_regs, + + .gpio_data = pinmux_data, + .gpio_data_size = ARRAY_SIZE(pinmux_data), +}; + +void sh7367_pinmux_init(void) +{ + register_pinmux(&sh7367_pinmux_info); +} diff --git a/arch/arm/mach-shmobile/pfc-sh7372.c b/arch/arm/mach-shmobile/pfc-sh7372.c new file mode 100644 index 00000000000..9557d0964d7 --- /dev/null +++ b/arch/arm/mach-shmobile/pfc-sh7372.c @@ -0,0 +1,1637 @@ +/* + * sh7372 processor support - PFC hardware block + * + * Copyright (C) 2010 Kuninori Morimoto <morimoto.kuninori@renesas.com> + * + * Based on + * sh7367 processor support - PFC hardware block + * Copyright (C) 2010 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/gpio.h> +#include <mach/sh7372.h> + +#define _1(fn, pfx, sfx) fn(pfx, sfx) + +#define _10(fn, pfx, sfx) \ + _1(fn, pfx##0, sfx), _1(fn, pfx##1, sfx), \ + _1(fn, pfx##2, sfx), _1(fn, pfx##3, sfx), \ + _1(fn, pfx##4, sfx), _1(fn, pfx##5, sfx), \ + _1(fn, pfx##6, sfx), _1(fn, pfx##7, sfx), \ + _1(fn, pfx##8, sfx), _1(fn, pfx##9, sfx) + +#define _80(fn, pfx, sfx) \ + _10(fn, pfx##1, sfx), _10(fn, pfx##2, sfx), \ + _10(fn, pfx##3, sfx), _10(fn, pfx##4, sfx), \ + _10(fn, pfx##5, sfx), _10(fn, pfx##6, sfx), \ + _10(fn, pfx##7, sfx), _10(fn, pfx##8, sfx) + +#define _190(fn, pfx, sfx) \ + _10(fn, pfx, sfx), _80(fn, pfx, sfx), _10(fn, pfx##9, sfx), \ + _10(fn, pfx##10, sfx), _80(fn, pfx##1, sfx), _1(fn, pfx##190, sfx) + +#define _PORT(pfx, sfx) pfx##_##sfx +#define PORT_ALL(str) _190(_PORT, PORT, str) + +enum { + PINMUX_RESERVED = 0, + + /* PORT0_DATA -> PORT190_DATA */ + PINMUX_DATA_BEGIN, + PORT_ALL(DATA), + PINMUX_DATA_END, + + /* PORT0_IN -> PORT190_IN */ + PINMUX_INPUT_BEGIN, + PORT_ALL(IN), + PINMUX_INPUT_END, + + /* PORT0_IN_PU -> PORT190_IN_PU */ + PINMUX_INPUT_PULLUP_BEGIN, + PORT_ALL(IN_PU), + PINMUX_INPUT_PULLUP_END, + + /* PORT0_IN_PD -> PORT190_IN_PD */ + PINMUX_INPUT_PULLDOWN_BEGIN, + PORT_ALL(IN_PD), + PINMUX_INPUT_PULLDOWN_END, + + /* PORT0_OUT -> PORT190_OUT */ + PINMUX_OUTPUT_BEGIN, + PORT_ALL(OUT), + PINMUX_OUTPUT_END, + + PINMUX_FUNCTION_BEGIN, + PORT_ALL(FN_IN), /* PORT0_FN_IN -> PORT190_FN_IN */ + PORT_ALL(FN_OUT), /* PORT0_FN_OUT -> PORT190_FN_OUT */ + PORT_ALL(FN0), /* PORT0_FN0 -> PORT190_FN0 */ + PORT_ALL(FN1), /* PORT0_FN1 -> PORT190_FN1 */ + PORT_ALL(FN2), /* PORT0_FN2 -> PORT190_FN2 */ + PORT_ALL(FN3), /* PORT0_FN3 -> PORT190_FN3 */ + PORT_ALL(FN4), /* PORT0_FN4 -> PORT190_FN4 */ + PORT_ALL(FN5), /* PORT0_FN5 -> PORT190_FN5 */ + PORT_ALL(FN6), /* PORT0_FN6 -> PORT190_FN6 */ + PORT_ALL(FN7), /* PORT0_FN7 -> PORT190_FN7 */ + + MSEL1CR_31_0, MSEL1CR_31_1, + MSEL1CR_30_0, MSEL1CR_30_1, + MSEL1CR_29_0, MSEL1CR_29_1, + MSEL1CR_28_0, MSEL1CR_28_1, + MSEL1CR_27_0, MSEL1CR_27_1, + MSEL1CR_26_0, MSEL1CR_26_1, + MSEL1CR_16_0, MSEL1CR_16_1, + MSEL1CR_15_0, MSEL1CR_15_1, + MSEL1CR_14_0, MSEL1CR_14_1, + MSEL1CR_13_0, MSEL1CR_13_1, + MSEL1CR_12_0, MSEL1CR_12_1, + MSEL1CR_9_0, MSEL1CR_9_1, + MSEL1CR_8_0, MSEL1CR_8_1, + MSEL1CR_7_0, MSEL1CR_7_1, + MSEL1CR_6_0, MSEL1CR_6_1, + MSEL1CR_4_0, MSEL1CR_4_1, + MSEL1CR_3_0, MSEL1CR_3_1, + MSEL1CR_2_0, MSEL1CR_2_1, + MSEL1CR_0_0, MSEL1CR_0_1, + + MSEL3CR_27_0, MSEL3CR_27_1, + MSEL3CR_26_0, MSEL3CR_26_1, + MSEL3CR_21_0, MSEL3CR_21_1, + MSEL3CR_20_0, MSEL3CR_20_1, + MSEL3CR_15_0, MSEL3CR_15_1, + MSEL3CR_9_0, MSEL3CR_9_1, + MSEL3CR_6_0, MSEL3CR_6_1, + + MSEL4CR_19_0, MSEL4CR_19_1, + MSEL4CR_18_0, MSEL4CR_18_1, + MSEL4CR_17_0, MSEL4CR_17_1, + MSEL4CR_16_0, MSEL4CR_16_1, + MSEL4CR_15_0, MSEL4CR_15_1, + MSEL4CR_14_0, MSEL4CR_14_1, + MSEL4CR_10_0, MSEL4CR_10_1, + MSEL4CR_6_0, MSEL4CR_6_1, + MSEL4CR_4_0, MSEL4CR_4_1, + MSEL4CR_1_0, MSEL4CR_1_1, + PINMUX_FUNCTION_END, + + PINMUX_MARK_BEGIN, + + /* IRQ */ + IRQ0_6_MARK, IRQ0_162_MARK, IRQ1_MARK, IRQ2_4_MARK, + IRQ2_5_MARK, IRQ3_8_MARK, IRQ3_16_MARK, IRQ4_17_MARK, + IRQ4_163_MARK, IRQ5_MARK, IRQ6_39_MARK, IRQ6_164_MARK, + IRQ7_40_MARK, IRQ7_167_MARK, IRQ8_41_MARK, IRQ8_168_MARK, + IRQ9_42_MARK, IRQ9_169_MARK, IRQ10_MARK, IRQ11_MARK, + IRQ12_80_MARK, IRQ12_137_MARK, IRQ13_81_MARK, IRQ13_145_MARK, + IRQ14_82_MARK, IRQ14_146_MARK, IRQ15_83_MARK, IRQ15_147_MARK, + IRQ16_84_MARK, IRQ16_170_MARK, IRQ17_MARK, IRQ18_MARK, + IRQ19_MARK, IRQ20_MARK, IRQ21_MARK, IRQ22_MARK, + IRQ23_MARK, IRQ24_MARK, IRQ25_MARK, IRQ26_121_MARK, + IRQ26_172_MARK, IRQ27_122_MARK, IRQ27_180_MARK, IRQ28_123_MARK, + IRQ28_181_MARK, IRQ29_129_MARK, IRQ29_182_MARK, IRQ30_130_MARK, + IRQ30_183_MARK, IRQ31_138_MARK, IRQ31_184_MARK, + + /* MSIOF0 */ + MSIOF0_TSYNC_MARK, MSIOF0_TSCK_MARK, MSIOF0_RXD_MARK, + MSIOF0_RSCK_MARK, MSIOF0_RSYNC_MARK, MSIOF0_MCK0_MARK, + MSIOF0_MCK1_MARK, MSIOF0_SS1_MARK, MSIOF0_SS2_MARK, + MSIOF0_TXD_MARK, + + /* MSIOF1 */ + MSIOF1_TSCK_39_MARK, MSIOF1_TSYNC_40_MARK, + MSIOF1_TSCK_88_MARK, MSIOF1_TSYNC_89_MARK, + MSIOF1_TXD_41_MARK, MSIOF1_RXD_42_MARK, + MSIOF1_TXD_90_MARK, MSIOF1_RXD_91_MARK, + MSIOF1_SS1_43_MARK, MSIOF1_SS2_44_MARK, + MSIOF1_SS1_92_MARK, MSIOF1_SS2_93_MARK, + MSIOF1_RSCK_MARK, MSIOF1_RSYNC_MARK, + MSIOF1_MCK0_MARK, MSIOF1_MCK1_MARK, + + /* MSIOF2 */ + MSIOF2_RSCK_MARK, MSIOF2_RSYNC_MARK, MSIOF2_MCK0_MARK, + MSIOF2_MCK1_MARK, MSIOF2_SS1_MARK, MSIOF2_SS2_MARK, + MSIOF2_TSYNC_MARK, MSIOF2_TSCK_MARK, MSIOF2_RXD_MARK, + MSIOF2_TXD_MARK, + + /* MSIOF3 */ + BBIF1_RXD_MARK, BBIF1_TSYNC_MARK, BBIF1_TSCK_MARK, + BBIF1_TXD_MARK, BBIF1_RSCK_MARK, BBIF1_RSYNC_MARK, + BBIF1_FLOW_MARK, BB_RX_FLOW_N_MARK, + + /* MSIOF4 */ + BBIF2_TSCK1_MARK, BBIF2_TSYNC1_MARK, + BBIF2_TXD1_MARK, BBIF2_RXD_MARK, + + /* FSI */ + FSIACK_MARK, FSIBCK_MARK, FSIAILR_MARK, FSIAIBT_MARK, + FSIAISLD_MARK, FSIAOMC_MARK, FSIAOLR_MARK, FSIAOBT_MARK, + FSIAOSLD_MARK, FSIASPDIF_11_MARK, FSIASPDIF_15_MARK, + + /* FMSI */ + FMSOCK_MARK, FMSOOLR_MARK, FMSIOLR_MARK, FMSOOBT_MARK, + FMSIOBT_MARK, FMSOSLD_MARK, FMSOILR_MARK, FMSIILR_MARK, + FMSOIBT_MARK, FMSIIBT_MARK, FMSISLD_MARK, FMSICK_MARK, + + /* SCIFA0 */ + SCIFA0_TXD_MARK, SCIFA0_RXD_MARK, SCIFA0_SCK_MARK, + SCIFA0_RTS_MARK, SCIFA0_CTS_MARK, + + /* SCIFA1 */ + SCIFA1_TXD_MARK, SCIFA1_RXD_MARK, SCIFA1_SCK_MARK, + SCIFA1_RTS_MARK, SCIFA1_CTS_MARK, + + /* SCIFA2 */ + SCIFA2_CTS1_MARK, SCIFA2_RTS1_MARK, SCIFA2_TXD1_MARK, + SCIFA2_RXD1_MARK, SCIFA2_SCK1_MARK, + + /* SCIFA3 */ + SCIFA3_CTS_43_MARK, SCIFA3_CTS_140_MARK, SCIFA3_RTS_44_MARK, + SCIFA3_RTS_141_MARK, SCIFA3_SCK_MARK, SCIFA3_TXD_MARK, + SCIFA3_RXD_MARK, + + /* SCIFA4 */ + SCIFA4_RXD_MARK, SCIFA4_TXD_MARK, + + /* SCIFA5 */ + SCIFA5_RXD_MARK, SCIFA5_TXD_MARK, + + /* SCIFB */ + SCIFB_SCK_MARK, SCIFB_RTS_MARK, SCIFB_CTS_MARK, + SCIFB_TXD_MARK, SCIFB_RXD_MARK, + + /* CEU */ + VIO_HD_MARK, VIO_CKO1_MARK, VIO_CKO2_MARK, VIO_VD_MARK, + VIO_CLK_MARK, VIO_FIELD_MARK, VIO_CKO_MARK, + VIO_D0_MARK, VIO_D1_MARK, VIO_D2_MARK, VIO_D3_MARK, + VIO_D4_MARK, VIO_D5_MARK, VIO_D6_MARK, VIO_D7_MARK, + VIO_D8_MARK, VIO_D9_MARK, VIO_D10_MARK, VIO_D11_MARK, + VIO_D12_MARK, VIO_D13_MARK, VIO_D14_MARK, VIO_D15_MARK, + + /* USB0 */ + IDIN_0_MARK, EXTLP_0_MARK, OVCN2_0_MARK, PWEN_0_MARK, + OVCN_0_MARK, VBUS0_0_MARK, + + /* USB1 */ + IDIN_1_18_MARK, IDIN_1_113_MARK, + PWEN_1_115_MARK, PWEN_1_138_MARK, + OVCN_1_114_MARK, OVCN_1_162_MARK, + EXTLP_1_MARK, OVCN2_1_MARK, + VBUS0_1_MARK, + + /* GPIO */ + GPI0_MARK, GPI1_MARK, GPO0_MARK, GPO1_MARK, + + /* BSC */ + BS_MARK, WE1_MARK, + CKO_MARK, WAIT_MARK, RDWR_MARK, + + A0_MARK, A1_MARK, A2_MARK, A3_MARK, + A6_MARK, A7_MARK, A8_MARK, A9_MARK, + A10_MARK, A11_MARK, A12_MARK, A13_MARK, + A14_MARK, A15_MARK, A16_MARK, A17_MARK, + A18_MARK, A19_MARK, A20_MARK, A21_MARK, + A22_MARK, A23_MARK, A24_MARK, A25_MARK, + A26_MARK, + + CS0_MARK, CS2_MARK, CS4_MARK, + CS5A_MARK, CS5B_MARK, CS6A_MARK, + + /* BSC/FLCTL */ + RD_FSC_MARK, WE0_FWE_MARK, A4_FOE_MARK, A5_FCDE_MARK, + D0_NAF0_MARK, D1_NAF1_MARK, D2_NAF2_MARK, D3_NAF3_MARK, + D4_NAF4_MARK, D5_NAF5_MARK, D6_NAF6_MARK, D7_NAF7_MARK, + D8_NAF8_MARK, D9_NAF9_MARK, D10_NAF10_MARK, D11_NAF11_MARK, + D12_NAF12_MARK, D13_NAF13_MARK, D14_NAF14_MARK, D15_NAF15_MARK, + + /* MMCIF(1) */ + MMCD0_0_MARK, MMCD0_1_MARK, MMCD0_2_MARK, MMCD0_3_MARK, + MMCD0_4_MARK, MMCD0_5_MARK, MMCD0_6_MARK, MMCD0_7_MARK, + MMCCMD0_MARK, MMCCLK0_MARK, + + /* MMCIF(2) */ + MMCD1_0_MARK, MMCD1_1_MARK, MMCD1_2_MARK, MMCD1_3_MARK, + MMCD1_4_MARK, MMCD1_5_MARK, MMCD1_6_MARK, MMCD1_7_MARK, + MMCCLK1_MARK, MMCCMD1_MARK, + + /* SPU2 */ + VINT_I_MARK, + + /* FLCTL */ + FCE1_MARK, FCE0_MARK, FRB_MARK, + + /* HSI */ + GP_RX_FLAG_MARK, GP_RX_DATA_MARK, GP_TX_READY_MARK, + GP_RX_WAKE_MARK, MP_TX_FLAG_MARK, MP_TX_DATA_MARK, + MP_RX_READY_MARK, MP_TX_WAKE_MARK, + + /* MFI */ + MFIv6_MARK, + MFIv4_MARK, + + MEMC_CS0_MARK, MEMC_BUSCLK_MEMC_A0_MARK, + MEMC_CS1_MEMC_A1_MARK, MEMC_ADV_MEMC_DREQ0_MARK, + MEMC_WAIT_MEMC_DREQ1_MARK, MEMC_NOE_MARK, + MEMC_NWE_MARK, MEMC_INT_MARK, + + MEMC_AD0_MARK, MEMC_AD1_MARK, MEMC_AD2_MARK, + MEMC_AD3_MARK, MEMC_AD4_MARK, MEMC_AD5_MARK, + MEMC_AD6_MARK, MEMC_AD7_MARK, MEMC_AD8_MARK, + MEMC_AD9_MARK, MEMC_AD10_MARK, MEMC_AD11_MARK, + MEMC_AD12_MARK, MEMC_AD13_MARK, MEMC_AD14_MARK, + MEMC_AD15_MARK, + + /* SIM */ + SIM_RST_MARK, SIM_CLK_MARK, SIM_D_MARK, + + /* TPU */ + TPU0TO0_MARK, TPU0TO1_MARK, + TPU0TO2_93_MARK, TPU0TO2_99_MARK, + TPU0TO3_MARK, + + /* I2C2 */ + I2C_SCL2_MARK, I2C_SDA2_MARK, + + /* I2C3(1) */ + I2C_SCL3_MARK, I2C_SDA3_MARK, + + /* I2C3(2) */ + I2C_SCL3S_MARK, I2C_SDA3S_MARK, + + /* I2C4(2) */ + I2C_SCL4_MARK, I2C_SDA4_MARK, + + /* I2C4(2) */ + I2C_SCL4S_MARK, I2C_SDA4S_MARK, + + /* KEYSC */ + KEYOUT0_MARK, KEYIN0_121_MARK, KEYIN0_136_MARK, + KEYOUT1_MARK, KEYIN1_122_MARK, KEYIN1_135_MARK, + KEYOUT2_MARK, KEYIN2_123_MARK, KEYIN2_134_MARK, + KEYOUT3_MARK, KEYIN3_124_MARK, KEYIN3_133_MARK, + KEYOUT4_MARK, KEYIN4_MARK, + KEYOUT5_MARK, KEYIN5_MARK, + KEYOUT6_MARK, KEYIN6_MARK, + KEYOUT7_MARK, KEYIN7_MARK, + + /* LCDC */ + LCDC0_SELECT_MARK, + LCDC1_SELECT_MARK, + LCDHSYN_MARK, LCDCS_MARK, LCDVSYN_MARK, LCDDCK_MARK, + LCDWR_MARK, LCDRD_MARK, LCDDISP_MARK, LCDRS_MARK, + LCDLCLK_MARK, LCDDON_MARK, + + LCDD0_MARK, LCDD1_MARK, LCDD2_MARK, LCDD3_MARK, + LCDD4_MARK, LCDD5_MARK, LCDD6_MARK, LCDD7_MARK, + LCDD8_MARK, LCDD9_MARK, LCDD10_MARK, LCDD11_MARK, + LCDD12_MARK, LCDD13_MARK, LCDD14_MARK, LCDD15_MARK, + LCDD16_MARK, LCDD17_MARK, LCDD18_MARK, LCDD19_MARK, + LCDD20_MARK, LCDD21_MARK, LCDD22_MARK, LCDD23_MARK, + + /* IRDA */ + IRDA_OUT_MARK, IRDA_IN_MARK, IRDA_FIRSEL_MARK, + IROUT_139_MARK, IROUT_140_MARK, + + /* TSIF1 */ + TS0_1SELECT_MARK, + TS0_2SELECT_MARK, + TS1_1SELECT_MARK, + TS1_2SELECT_MARK, + + TS_SPSYNC1_MARK, TS_SDAT1_MARK, + TS_SDEN1_MARK, TS_SCK1_MARK, + + /* TSIF2 */ + TS_SPSYNC2_MARK, TS_SDAT2_MARK, + TS_SDEN2_MARK, TS_SCK2_MARK, + + /* HDMI */ + HDMI_HPD_MARK, HDMI_CEC_MARK, + + /* SDHI0 */ + SDHICLK0_MARK, SDHICD0_MARK, + SDHICMD0_MARK, SDHIWP0_MARK, + SDHID0_0_MARK, SDHID0_1_MARK, + SDHID0_2_MARK, SDHID0_3_MARK, + + /* SDHI1 */ + SDHICLK1_MARK, SDHICMD1_MARK, SDHID1_0_MARK, + SDHID1_1_MARK, SDHID1_2_MARK, SDHID1_3_MARK, + + /* SDHI2 */ + SDHICLK2_MARK, SDHICMD2_MARK, SDHID2_0_MARK, + SDHID2_1_MARK, SDHID2_2_MARK, SDHID2_3_MARK, + + /* SDENC */ + SDENC_CPG_MARK, + SDENC_DV_CLKI_MARK, + + PINMUX_MARK_END, +}; + +/* PORT_DATA_I_PD(nr) */ +#define _I___D(nr) \ + PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \ + PORT##nr##_IN, PORT##nr##_IN_PD) + +/* PORT_DATA_I_PU(nr) */ +#define _I__U_(nr) \ + PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \ + PORT##nr##_IN, PORT##nr##_IN_PU) + +/* PORT_DATA_I_PU_PD(nr) */ +#define _I__UD(nr) \ + PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \ + PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU) + +/* PORT_DATA_O(nr) */ +#define __O___(nr) \ + PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT) + +/* PORT_DATA_IO(nr) */ +#define _IO___(nr) \ + PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \ + PORT##nr##_IN) + +/* PORT_DATA_IO_PD(nr) */ +#define _IO__D(nr) \ + PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \ + PORT##nr##_IN, PORT##nr##_IN_PD) + +/* PORT_DATA_IO_PU(nr) */ +#define _IO_U_(nr) \ + PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \ + PORT##nr##_IN, PORT##nr##_IN_PU) + +/* PORT_DATA_IO_PU_PD(nr) */ +#define _IO_UD(nr) \ + PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \ + PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU) + + +static pinmux_enum_t pinmux_data[] = { + + /* specify valid pin states for each pin in GPIO mode */ + + _IO__D(0), _IO__D(1), __O___(2), _I___D(3), _I___D(4), + _I___D(5), _IO_UD(6), _I___D(7), _IO__D(8), __O___(9), + + __O___(10), __O___(11), _IO_UD(12), _IO__D(13), _IO__D(14), + __O___(15), _IO__D(16), _IO__D(17), _I___D(18), _IO___(19), + + _IO___(20), _IO___(21), _IO___(22), _IO___(23), _IO___(24), + _IO___(25), _IO___(26), _IO___(27), _IO___(28), _IO___(29), + + _IO___(30), _IO___(31), _IO___(32), _IO___(33), _IO___(34), + _IO___(35), _IO___(36), _IO___(37), _IO___(38), _IO___(39), + + _IO___(40), _IO___(41), _IO___(42), _IO___(43), _IO___(44), + _IO___(45), _IO_U_(46), _IO_U_(47), _IO_U_(48), _IO_U_(49), + + _IO_U_(50), _IO_U_(51), _IO_U_(52), _IO_U_(53), _IO_U_(54), + _IO_U_(55), _IO_U_(56), _IO_U_(57), _IO_U_(58), _IO_U_(59), + + _IO_U_(60), _IO_U_(61), _IO___(62), __O___(63), __O___(64), + _IO_U_(65), __O___(66), _IO_U_(67), __O___(68), _IO___(69), /*66?*/ + + _IO___(70), _IO___(71), __O___(72), _I__U_(73), _I__UD(74), + _IO_UD(75), _IO_UD(76), _IO_UD(77), _IO_UD(78), _IO_UD(79), + + _IO_UD(80), _IO_UD(81), _IO_UD(82), _IO_UD(83), _IO_UD(84), + _IO_UD(85), _IO_UD(86), _IO_UD(87), _IO_UD(88), _IO_UD(89), + + _IO_UD(90), _IO_UD(91), _IO_UD(92), _IO_UD(93), _IO_UD(94), + _IO_UD(95), _IO_U_(96), _IO_UD(97), _IO_UD(98), __O___(99), /*99?*/ + + _IO__D(100), _IO__D(101), _IO__D(102), _IO__D(103), _IO__D(104), + _IO__D(105), _IO_U_(106), _IO_U_(107), _IO_U_(108), _IO_U_(109), + + _IO_U_(110), _IO_U_(111), _IO__D(112), _IO__D(113), _IO_U_(114), + _IO_U_(115), _IO_U_(116), _IO_U_(117), _IO_U_(118), _IO_U_(119), + + _IO_U_(120), _IO__D(121), _IO__D(122), _IO__D(123), _IO__D(124), + _IO__D(125), _IO__D(126), _IO__D(127), _IO__D(128), _IO_UD(129), + + _IO_UD(130), _IO_UD(131), _IO_UD(132), _IO_UD(133), _IO_UD(134), + _IO_UD(135), _IO__D(136), _IO__D(137), _IO__D(138), _IO__D(139), + + _IO__D(140), _IO__D(141), _IO__D(142), _IO_UD(143), _IO__D(144), + _IO__D(145), _IO__D(146), _IO__D(147), _IO__D(148), _IO__D(149), + + _IO__D(150), _IO__D(151), _IO_UD(152), _I___D(153), _IO_UD(154), + _I___D(155), _IO__D(156), _IO__D(157), _I___D(158), _IO__D(159), + + __O___(160), _IO__D(161), _IO__D(162), _IO__D(163), _I___D(164), + _IO__D(165), _I___D(166), _I___D(167), _I___D(168), _I___D(169), + + _I___D(170), __O___(171), _IO_UD(172), _IO_UD(173), _IO_UD(174), + _IO_UD(175), _IO_UD(176), _IO_UD(177), _IO_UD(178), __O___(179), + + _IO_UD(180), _IO_UD(181), _IO_UD(182), _IO_UD(183), _IO_UD(184), + __O___(185), _IO_UD(186), _IO_UD(187), _IO_UD(188), _IO_UD(189), + + _IO_UD(190), + + /* IRQ */ + PINMUX_DATA(IRQ0_6_MARK, PORT6_FN0, MSEL1CR_0_0), + PINMUX_DATA(IRQ0_162_MARK, PORT162_FN0, MSEL1CR_0_1), + PINMUX_DATA(IRQ1_MARK, PORT12_FN0), + PINMUX_DATA(IRQ2_4_MARK, PORT4_FN0, MSEL1CR_2_0), + PINMUX_DATA(IRQ2_5_MARK, PORT5_FN0, MSEL1CR_2_1), + PINMUX_DATA(IRQ3_8_MARK, PORT8_FN0, MSEL1CR_3_0), + PINMUX_DATA(IRQ3_16_MARK, PORT16_FN0, MSEL1CR_3_1), + PINMUX_DATA(IRQ4_17_MARK, PORT17_FN0, MSEL1CR_4_0), + PINMUX_DATA(IRQ4_163_MARK, PORT163_FN0, MSEL1CR_4_1), + PINMUX_DATA(IRQ5_MARK, PORT18_FN0), + PINMUX_DATA(IRQ6_39_MARK, PORT39_FN0, MSEL1CR_6_0), + PINMUX_DATA(IRQ6_164_MARK, PORT164_FN0, MSEL1CR_6_1), + PINMUX_DATA(IRQ7_40_MARK, PORT40_FN0, MSEL1CR_7_1), + PINMUX_DATA(IRQ7_167_MARK, PORT167_FN0, MSEL1CR_7_0), + PINMUX_DATA(IRQ8_41_MARK, PORT41_FN0, MSEL1CR_8_1), + PINMUX_DATA(IRQ8_168_MARK, PORT168_FN0, MSEL1CR_8_0), + PINMUX_DATA(IRQ9_42_MARK, PORT42_FN0, MSEL1CR_9_0), + PINMUX_DATA(IRQ9_169_MARK, PORT169_FN0, MSEL1CR_9_1), + PINMUX_DATA(IRQ10_MARK, PORT65_FN0, MSEL1CR_9_1), + PINMUX_DATA(IRQ11_MARK, PORT67_FN0), + PINMUX_DATA(IRQ12_80_MARK, PORT80_FN0, MSEL1CR_12_0), + PINMUX_DATA(IRQ12_137_MARK, PORT137_FN0, MSEL1CR_12_1), + PINMUX_DATA(IRQ13_81_MARK, PORT81_FN0, MSEL1CR_13_0), + PINMUX_DATA(IRQ13_145_MARK, PORT145_FN0, MSEL1CR_13_1), + PINMUX_DATA(IRQ14_82_MARK, PORT82_FN0, MSEL1CR_14_0), + PINMUX_DATA(IRQ14_146_MARK, PORT146_FN0, MSEL1CR_14_1), + PINMUX_DATA(IRQ15_83_MARK, PORT83_FN0, MSEL1CR_15_0), + PINMUX_DATA(IRQ15_147_MARK, PORT147_FN0, MSEL1CR_15_1), + PINMUX_DATA(IRQ16_84_MARK, PORT84_FN0, MSEL1CR_16_0), + PINMUX_DATA(IRQ16_170_MARK, PORT170_FN0, MSEL1CR_16_1), + PINMUX_DATA(IRQ17_MARK, PORT85_FN0), + PINMUX_DATA(IRQ18_MARK, PORT86_FN0), + PINMUX_DATA(IRQ19_MARK, PORT87_FN0), + PINMUX_DATA(IRQ20_MARK, PORT92_FN0), + PINMUX_DATA(IRQ21_MARK, PORT93_FN0), + PINMUX_DATA(IRQ22_MARK, PORT94_FN0), + PINMUX_DATA(IRQ23_MARK, PORT95_FN0), + PINMUX_DATA(IRQ24_MARK, PORT112_FN0), + PINMUX_DATA(IRQ25_MARK, PORT119_FN0), + PINMUX_DATA(IRQ26_121_MARK, PORT121_FN0, MSEL1CR_26_1), + PINMUX_DATA(IRQ26_172_MARK, PORT172_FN0, MSEL1CR_26_0), + PINMUX_DATA(IRQ27_122_MARK, PORT122_FN0, MSEL1CR_27_1), + PINMUX_DATA(IRQ27_180_MARK, PORT180_FN0, MSEL1CR_27_0), + PINMUX_DATA(IRQ28_123_MARK, PORT123_FN0, MSEL1CR_28_1), + PINMUX_DATA(IRQ28_181_MARK, PORT181_FN0, MSEL1CR_28_0), + PINMUX_DATA(IRQ29_129_MARK, PORT129_FN0, MSEL1CR_29_1), + PINMUX_DATA(IRQ29_182_MARK, PORT182_FN0, MSEL1CR_29_0), + PINMUX_DATA(IRQ30_130_MARK, PORT130_FN0, MSEL1CR_30_1), + PINMUX_DATA(IRQ30_183_MARK, PORT183_FN0, MSEL1CR_30_0), + PINMUX_DATA(IRQ31_138_MARK, PORT138_FN0, MSEL1CR_31_1), + PINMUX_DATA(IRQ31_184_MARK, PORT184_FN0, MSEL1CR_31_0), + + /* Function 1 */ + PINMUX_DATA(BBIF2_TSCK1_MARK, PORT0_FN1), + PINMUX_DATA(BBIF2_TSYNC1_MARK, PORT1_FN1), + PINMUX_DATA(BBIF2_TXD1_MARK, PORT2_FN1), + PINMUX_DATA(BBIF2_RXD_MARK, PORT3_FN1), + PINMUX_DATA(FSIACK_MARK, PORT4_FN1), + PINMUX_DATA(FSIAILR_MARK, PORT5_FN1), + PINMUX_DATA(FSIAIBT_MARK, PORT6_FN1), + PINMUX_DATA(FSIAISLD_MARK, PORT7_FN1), + PINMUX_DATA(FSIAOMC_MARK, PORT8_FN1), + PINMUX_DATA(FSIAOLR_MARK, PORT9_FN1), + PINMUX_DATA(FSIAOBT_MARK, PORT10_FN1), + PINMUX_DATA(FSIAOSLD_MARK, PORT11_FN1), + PINMUX_DATA(FMSOCK_MARK, PORT12_FN1), + PINMUX_DATA(FMSOOLR_MARK, PORT13_FN1), + PINMUX_DATA(FMSOOBT_MARK, PORT14_FN1), + PINMUX_DATA(FMSOSLD_MARK, PORT15_FN1), + PINMUX_DATA(FMSOILR_MARK, PORT16_FN1), + PINMUX_DATA(FMSOIBT_MARK, PORT17_FN1), + PINMUX_DATA(FMSISLD_MARK, PORT18_FN1), + PINMUX_DATA(A0_MARK, PORT19_FN1), + PINMUX_DATA(A1_MARK, PORT20_FN1), + PINMUX_DATA(A2_MARK, PORT21_FN1), + PINMUX_DATA(A3_MARK, PORT22_FN1), + PINMUX_DATA(A4_FOE_MARK, PORT23_FN1), + PINMUX_DATA(A5_FCDE_MARK, PORT24_FN1), + PINMUX_DATA(A6_MARK, PORT25_FN1), + PINMUX_DATA(A7_MARK, PORT26_FN1), + PINMUX_DATA(A8_MARK, PORT27_FN1), + PINMUX_DATA(A9_MARK, PORT28_FN1), + PINMUX_DATA(A10_MARK, PORT29_FN1), + PINMUX_DATA(A11_MARK, PORT30_FN1), + PINMUX_DATA(A12_MARK, PORT31_FN1), + PINMUX_DATA(A13_MARK, PORT32_FN1), + PINMUX_DATA(A14_MARK, PORT33_FN1), + PINMUX_DATA(A15_MARK, PORT34_FN1), + PINMUX_DATA(A16_MARK, PORT35_FN1), + PINMUX_DATA(A17_MARK, PORT36_FN1), + PINMUX_DATA(A18_MARK, PORT37_FN1), + PINMUX_DATA(A19_MARK, PORT38_FN1), + PINMUX_DATA(A20_MARK, PORT39_FN1), + PINMUX_DATA(A21_MARK, PORT40_FN1), + PINMUX_DATA(A22_MARK, PORT41_FN1), + PINMUX_DATA(A23_MARK, PORT42_FN1), + PINMUX_DATA(A24_MARK, PORT43_FN1), + PINMUX_DATA(A25_MARK, PORT44_FN1), + PINMUX_DATA(A26_MARK, PORT45_FN1), + PINMUX_DATA(D0_NAF0_MARK, PORT46_FN1), + PINMUX_DATA(D1_NAF1_MARK, PORT47_FN1), + PINMUX_DATA(D2_NAF2_MARK, PORT48_FN1), + PINMUX_DATA(D3_NAF3_MARK, PORT49_FN1), + PINMUX_DATA(D4_NAF4_MARK, PORT50_FN1), + PINMUX_DATA(D5_NAF5_MARK, PORT51_FN1), + PINMUX_DATA(D6_NAF6_MARK, PORT52_FN1), + PINMUX_DATA(D7_NAF7_MARK, PORT53_FN1), + PINMUX_DATA(D8_NAF8_MARK, PORT54_FN1), + PINMUX_DATA(D9_NAF9_MARK, PORT55_FN1), + PINMUX_DATA(D10_NAF10_MARK, PORT56_FN1), + PINMUX_DATA(D11_NAF11_MARK, PORT57_FN1), + PINMUX_DATA(D12_NAF12_MARK, PORT58_FN1), + PINMUX_DATA(D13_NAF13_MARK, PORT59_FN1), + PINMUX_DATA(D14_NAF14_MARK, PORT60_FN1), + PINMUX_DATA(D15_NAF15_MARK, PORT61_FN1), + PINMUX_DATA(CS0_MARK, PORT62_FN1), + PINMUX_DATA(CS2_MARK, PORT63_FN1), + PINMUX_DATA(CS4_MARK, PORT64_FN1), + PINMUX_DATA(CS5A_MARK, PORT65_FN1), + PINMUX_DATA(CS5B_MARK, PORT66_FN1), + PINMUX_DATA(CS6A_MARK, PORT67_FN1), + PINMUX_DATA(FCE0_MARK, PORT68_FN1), + PINMUX_DATA(RD_FSC_MARK, PORT69_FN1), + PINMUX_DATA(WE0_FWE_MARK, PORT70_FN1), + PINMUX_DATA(WE1_MARK, PORT71_FN1), + PINMUX_DATA(CKO_MARK, PORT72_FN1), + PINMUX_DATA(FRB_MARK, PORT73_FN1), + PINMUX_DATA(WAIT_MARK, PORT74_FN1), + PINMUX_DATA(RDWR_MARK, PORT75_FN1), + PINMUX_DATA(MEMC_AD0_MARK, PORT76_FN1), + PINMUX_DATA(MEMC_AD1_MARK, PORT77_FN1), + PINMUX_DATA(MEMC_AD2_MARK, PORT78_FN1), + PINMUX_DATA(MEMC_AD3_MARK, PORT79_FN1), + PINMUX_DATA(MEMC_AD4_MARK, PORT80_FN1), + PINMUX_DATA(MEMC_AD5_MARK, PORT81_FN1), + PINMUX_DATA(MEMC_AD6_MARK, PORT82_FN1), + PINMUX_DATA(MEMC_AD7_MARK, PORT83_FN1), + PINMUX_DATA(MEMC_AD8_MARK, PORT84_FN1), + PINMUX_DATA(MEMC_AD9_MARK, PORT85_FN1), + PINMUX_DATA(MEMC_AD10_MARK, PORT86_FN1), + PINMUX_DATA(MEMC_AD11_MARK, PORT87_FN1), + PINMUX_DATA(MEMC_AD12_MARK, PORT88_FN1), + PINMUX_DATA(MEMC_AD13_MARK, PORT89_FN1), + PINMUX_DATA(MEMC_AD14_MARK, PORT90_FN1), + PINMUX_DATA(MEMC_AD15_MARK, PORT91_FN1), + PINMUX_DATA(MEMC_CS0_MARK, PORT92_FN1), + PINMUX_DATA(MEMC_BUSCLK_MEMC_A0_MARK, PORT93_FN1), + PINMUX_DATA(MEMC_CS1_MEMC_A1_MARK, PORT94_FN1), + PINMUX_DATA(MEMC_ADV_MEMC_DREQ0_MARK, PORT95_FN1), + PINMUX_DATA(MEMC_WAIT_MEMC_DREQ1_MARK, PORT96_FN1), + PINMUX_DATA(MEMC_NOE_MARK, PORT97_FN1), + PINMUX_DATA(MEMC_NWE_MARK, PORT98_FN1), + PINMUX_DATA(MEMC_INT_MARK, PORT99_FN1), + PINMUX_DATA(VIO_VD_MARK, PORT100_FN1), + PINMUX_DATA(VIO_HD_MARK, PORT101_FN1), + PINMUX_DATA(VIO_D0_MARK, PORT102_FN1), + PINMUX_DATA(VIO_D1_MARK, PORT103_FN1), + PINMUX_DATA(VIO_D2_MARK, PORT104_FN1), + PINMUX_DATA(VIO_D3_MARK, PORT105_FN1), + PINMUX_DATA(VIO_D4_MARK, PORT106_FN1), + PINMUX_DATA(VIO_D5_MARK, PORT107_FN1), + PINMUX_DATA(VIO_D6_MARK, PORT108_FN1), + PINMUX_DATA(VIO_D7_MARK, PORT109_FN1), + PINMUX_DATA(VIO_D8_MARK, PORT110_FN1), + PINMUX_DATA(VIO_D9_MARK, PORT111_FN1), + PINMUX_DATA(VIO_D10_MARK, PORT112_FN1), + PINMUX_DATA(VIO_D11_MARK, PORT113_FN1), + PINMUX_DATA(VIO_D12_MARK, PORT114_FN1), + PINMUX_DATA(VIO_D13_MARK, PORT115_FN1), + PINMUX_DATA(VIO_D14_MARK, PORT116_FN1), + PINMUX_DATA(VIO_D15_MARK, PORT117_FN1), + PINMUX_DATA(VIO_CLK_MARK, PORT118_FN1), + PINMUX_DATA(VIO_FIELD_MARK, PORT119_FN1), + PINMUX_DATA(VIO_CKO_MARK, PORT120_FN1), + PINMUX_DATA(LCDD0_MARK, PORT121_FN1), + PINMUX_DATA(LCDD1_MARK, PORT122_FN1), + PINMUX_DATA(LCDD2_MARK, PORT123_FN1), + PINMUX_DATA(LCDD3_MARK, PORT124_FN1), + PINMUX_DATA(LCDD4_MARK, PORT125_FN1), + PINMUX_DATA(LCDD5_MARK, PORT126_FN1), + PINMUX_DATA(LCDD6_MARK, PORT127_FN1), + PINMUX_DATA(LCDD7_MARK, PORT128_FN1), + PINMUX_DATA(LCDD8_MARK, PORT129_FN1), + PINMUX_DATA(LCDD9_MARK, PORT130_FN1), + PINMUX_DATA(LCDD10_MARK, PORT131_FN1), + PINMUX_DATA(LCDD11_MARK, PORT132_FN1), + PINMUX_DATA(LCDD12_MARK, PORT133_FN1), + PINMUX_DATA(LCDD13_MARK, PORT134_FN1), + PINMUX_DATA(LCDD14_MARK, PORT135_FN1), + PINMUX_DATA(LCDD15_MARK, PORT136_FN1), + PINMUX_DATA(LCDD16_MARK, PORT137_FN1), + PINMUX_DATA(LCDD17_MARK, PORT138_FN1), + PINMUX_DATA(LCDD18_MARK, PORT139_FN1), + PINMUX_DATA(LCDD19_MARK, PORT140_FN1), + PINMUX_DATA(LCDD20_MARK, PORT141_FN1), + PINMUX_DATA(LCDD21_MARK, PORT142_FN1), + PINMUX_DATA(LCDD22_MARK, PORT143_FN1), + PINMUX_DATA(LCDD23_MARK, PORT144_FN1), + PINMUX_DATA(LCDHSYN_MARK, PORT145_FN1), + PINMUX_DATA(LCDVSYN_MARK, PORT146_FN1), + PINMUX_DATA(LCDDCK_MARK, PORT147_FN1), + PINMUX_DATA(LCDRD_MARK, PORT148_FN1), + PINMUX_DATA(LCDDISP_MARK, PORT149_FN1), + PINMUX_DATA(LCDLCLK_MARK, PORT150_FN1), + PINMUX_DATA(LCDDON_MARK, PORT151_FN1), + PINMUX_DATA(SCIFA0_TXD_MARK, PORT152_FN1), + PINMUX_DATA(SCIFA0_RXD_MARK, PORT153_FN1), + PINMUX_DATA(SCIFA1_TXD_MARK, PORT154_FN1), + PINMUX_DATA(SCIFA1_RXD_MARK, PORT155_FN1), + PINMUX_DATA(TS_SPSYNC1_MARK, PORT156_FN1), + PINMUX_DATA(TS_SDAT1_MARK, PORT157_FN1), + PINMUX_DATA(TS_SDEN1_MARK, PORT158_FN1), + PINMUX_DATA(TS_SCK1_MARK, PORT159_FN1), + PINMUX_DATA(TPU0TO0_MARK, PORT160_FN1), + PINMUX_DATA(TPU0TO1_MARK, PORT161_FN1), + PINMUX_DATA(SCIFB_SCK_MARK, PORT162_FN1), + PINMUX_DATA(SCIFB_RTS_MARK, PORT163_FN1), + PINMUX_DATA(SCIFB_CTS_MARK, PORT164_FN1), + PINMUX_DATA(SCIFB_TXD_MARK, PORT165_FN1), + PINMUX_DATA(SCIFB_RXD_MARK, PORT166_FN1), + PINMUX_DATA(VBUS0_0_MARK, PORT167_FN1), + PINMUX_DATA(VBUS0_1_MARK, PORT168_FN1), + PINMUX_DATA(HDMI_HPD_MARK, PORT169_FN1), + PINMUX_DATA(HDMI_CEC_MARK, PORT170_FN1), + PINMUX_DATA(SDHICLK0_MARK, PORT171_FN1), + PINMUX_DATA(SDHICD0_MARK, PORT172_FN1), + PINMUX_DATA(SDHID0_0_MARK, PORT173_FN1), + PINMUX_DATA(SDHID0_1_MARK, PORT174_FN1), + PINMUX_DATA(SDHID0_2_MARK, PORT175_FN1), + PINMUX_DATA(SDHID0_3_MARK, PORT176_FN1), + PINMUX_DATA(SDHICMD0_MARK, PORT177_FN1), + PINMUX_DATA(SDHIWP0_MARK, PORT178_FN1), + PINMUX_DATA(SDHICLK1_MARK, PORT179_FN1), + PINMUX_DATA(SDHID1_0_MARK, PORT180_FN1), + PINMUX_DATA(SDHID1_1_MARK, PORT181_FN1), + PINMUX_DATA(SDHID1_2_MARK, PORT182_FN1), + PINMUX_DATA(SDHID1_3_MARK, PORT183_FN1), + PINMUX_DATA(SDHICMD1_MARK, PORT184_FN1), + PINMUX_DATA(SDHICLK2_MARK, PORT185_FN1), + PINMUX_DATA(SDHID2_0_MARK, PORT186_FN1), + PINMUX_DATA(SDHID2_1_MARK, PORT187_FN1), + PINMUX_DATA(SDHID2_2_MARK, PORT188_FN1), + PINMUX_DATA(SDHID2_3_MARK, PORT189_FN1), + PINMUX_DATA(SDHICMD2_MARK, PORT190_FN1), + + /* Function 2 */ + PINMUX_DATA(FSIBCK_MARK, PORT4_FN2), + PINMUX_DATA(SCIFA4_RXD_MARK, PORT5_FN2), + PINMUX_DATA(SCIFA4_TXD_MARK, PORT6_FN2), + PINMUX_DATA(SCIFA5_RXD_MARK, PORT8_FN2), + PINMUX_DATA(FSIASPDIF_11_MARK, PORT11_FN2), + PINMUX_DATA(SCIFA5_TXD_MARK, PORT12_FN2), + PINMUX_DATA(FMSIOLR_MARK, PORT13_FN2), + PINMUX_DATA(FMSIOBT_MARK, PORT14_FN2), + PINMUX_DATA(FSIASPDIF_15_MARK, PORT15_FN2), + PINMUX_DATA(FMSIILR_MARK, PORT16_FN2), + PINMUX_DATA(FMSIIBT_MARK, PORT17_FN2), + PINMUX_DATA(BS_MARK, PORT19_FN2), + PINMUX_DATA(MSIOF0_TSYNC_MARK, PORT36_FN2), + PINMUX_DATA(MSIOF0_TSCK_MARK, PORT37_FN2), + PINMUX_DATA(MSIOF0_RXD_MARK, PORT38_FN2), + PINMUX_DATA(MSIOF0_RSCK_MARK, PORT39_FN2), + PINMUX_DATA(MSIOF0_RSYNC_MARK, PORT40_FN2), + PINMUX_DATA(MSIOF0_MCK0_MARK, PORT41_FN2), + PINMUX_DATA(MSIOF0_MCK1_MARK, PORT42_FN2), + PINMUX_DATA(MSIOF0_SS1_MARK, PORT43_FN2), + PINMUX_DATA(MSIOF0_SS2_MARK, PORT44_FN2), + PINMUX_DATA(MSIOF0_TXD_MARK, PORT45_FN2), + PINMUX_DATA(FMSICK_MARK, PORT65_FN2), + PINMUX_DATA(FCE1_MARK, PORT66_FN2), + PINMUX_DATA(BBIF1_RXD_MARK, PORT76_FN2), + PINMUX_DATA(BBIF1_TSYNC_MARK, PORT77_FN2), + PINMUX_DATA(BBIF1_TSCK_MARK, PORT78_FN2), + PINMUX_DATA(BBIF1_TXD_MARK, PORT79_FN2), + PINMUX_DATA(BBIF1_RSCK_MARK, PORT80_FN2), + PINMUX_DATA(BBIF1_RSYNC_MARK, PORT81_FN2), + PINMUX_DATA(BBIF1_FLOW_MARK, PORT82_FN2), + PINMUX_DATA(BB_RX_FLOW_N_MARK, PORT83_FN2), + PINMUX_DATA(MSIOF1_RSCK_MARK, PORT84_FN2), + PINMUX_DATA(MSIOF1_RSYNC_MARK, PORT85_FN2), + PINMUX_DATA(MSIOF1_MCK0_MARK, PORT86_FN2), + PINMUX_DATA(MSIOF1_MCK1_MARK, PORT87_FN2), + PINMUX_DATA(MSIOF1_TSCK_88_MARK, PORT88_FN2, MSEL4CR_10_1), + PINMUX_DATA(MSIOF1_TSYNC_89_MARK, PORT89_FN2, MSEL4CR_10_1), + PINMUX_DATA(MSIOF1_TXD_90_MARK, PORT90_FN2, MSEL4CR_10_1), + PINMUX_DATA(MSIOF1_RXD_91_MARK, PORT91_FN2, MSEL4CR_10_1), + PINMUX_DATA(MSIOF1_SS1_92_MARK, PORT92_FN2, MSEL4CR_10_1), + PINMUX_DATA(MSIOF1_SS2_93_MARK, PORT93_FN2, MSEL4CR_10_1), + PINMUX_DATA(SCIFA2_CTS1_MARK, PORT94_FN2), + PINMUX_DATA(SCIFA2_RTS1_MARK, PORT95_FN2), + PINMUX_DATA(SCIFA2_TXD1_MARK, PORT96_FN2), + PINMUX_DATA(SCIFA2_RXD1_MARK, PORT97_FN2), + PINMUX_DATA(SCIFA2_SCK1_MARK, PORT98_FN2), + PINMUX_DATA(I2C_SCL2_MARK, PORT110_FN2), + PINMUX_DATA(I2C_SDA2_MARK, PORT111_FN2), + PINMUX_DATA(I2C_SCL3_MARK, PORT114_FN2, MSEL4CR_16_1), + PINMUX_DATA(I2C_SDA3_MARK, PORT115_FN2, MSEL4CR_16_1), + PINMUX_DATA(I2C_SCL4_MARK, PORT116_FN2, MSEL4CR_17_1), + PINMUX_DATA(I2C_SDA4_MARK, PORT117_FN2, MSEL4CR_17_1), + PINMUX_DATA(MSIOF2_RSCK_MARK, PORT134_FN2), + PINMUX_DATA(MSIOF2_RSYNC_MARK, PORT135_FN2), + PINMUX_DATA(MSIOF2_MCK0_MARK, PORT136_FN2), + PINMUX_DATA(MSIOF2_MCK1_MARK, PORT137_FN2), + PINMUX_DATA(MSIOF2_SS1_MARK, PORT138_FN2), + PINMUX_DATA(MSIOF2_SS2_MARK, PORT139_FN2), + PINMUX_DATA(SCIFA3_CTS_140_MARK, PORT140_FN2, MSEL3CR_9_1), + PINMUX_DATA(SCIFA3_RTS_141_MARK, PORT141_FN2), + PINMUX_DATA(SCIFA3_SCK_MARK, PORT142_FN2), + PINMUX_DATA(SCIFA3_TXD_MARK, PORT143_FN2), + PINMUX_DATA(SCIFA3_RXD_MARK, PORT144_FN2), + PINMUX_DATA(MSIOF2_TSYNC_MARK, PORT148_FN2), + PINMUX_DATA(MSIOF2_TSCK_MARK, PORT149_FN2), + PINMUX_DATA(MSIOF2_RXD_MARK, PORT150_FN2), + PINMUX_DATA(MSIOF2_TXD_MARK, PORT151_FN2), + PINMUX_DATA(SCIFA0_SCK_MARK, PORT156_FN2), + PINMUX_DATA(SCIFA0_RTS_MARK, PORT157_FN2), + PINMUX_DATA(SCIFA0_CTS_MARK, PORT158_FN2), + PINMUX_DATA(SCIFA1_SCK_MARK, PORT159_FN2), + PINMUX_DATA(SCIFA1_RTS_MARK, PORT160_FN2), + PINMUX_DATA(SCIFA1_CTS_MARK, PORT161_FN2), + + /* Function 3 */ + PINMUX_DATA(VIO_CKO1_MARK, PORT16_FN3), + PINMUX_DATA(VIO_CKO2_MARK, PORT17_FN3), + PINMUX_DATA(IDIN_1_18_MARK, PORT18_FN3, MSEL4CR_14_1), + PINMUX_DATA(MSIOF1_TSCK_39_MARK, PORT39_FN3, MSEL4CR_10_0), + PINMUX_DATA(MSIOF1_TSYNC_40_MARK, PORT40_FN3, MSEL4CR_10_0), + PINMUX_DATA(MSIOF1_TXD_41_MARK, PORT41_FN3, MSEL4CR_10_0), + PINMUX_DATA(MSIOF1_RXD_42_MARK, PORT42_FN3, MSEL4CR_10_0), + PINMUX_DATA(MSIOF1_SS1_43_MARK, PORT43_FN3, MSEL4CR_10_0), + PINMUX_DATA(MSIOF1_SS2_44_MARK, PORT44_FN3, MSEL4CR_10_0), + PINMUX_DATA(MMCD1_0_MARK, PORT54_FN3, MSEL4CR_15_1), + PINMUX_DATA(MMCD1_1_MARK, PORT55_FN3, MSEL4CR_15_1), + PINMUX_DATA(MMCD1_2_MARK, PORT56_FN3, MSEL4CR_15_1), + PINMUX_DATA(MMCD1_3_MARK, PORT57_FN3, MSEL4CR_15_1), + PINMUX_DATA(MMCD1_4_MARK, PORT58_FN3, MSEL4CR_15_1), + PINMUX_DATA(MMCD1_5_MARK, PORT59_FN3, MSEL4CR_15_1), + PINMUX_DATA(MMCD1_6_MARK, PORT60_FN3, MSEL4CR_15_1), + PINMUX_DATA(MMCD1_7_MARK, PORT61_FN3, MSEL4CR_15_1), + PINMUX_DATA(VINT_I_MARK, PORT65_FN3), + PINMUX_DATA(MMCCLK1_MARK, PORT66_FN3, MSEL4CR_15_1), + PINMUX_DATA(MMCCMD1_MARK, PORT67_FN3, MSEL4CR_15_1), + PINMUX_DATA(TPU0TO2_93_MARK, PORT93_FN3), + PINMUX_DATA(TPU0TO2_99_MARK, PORT99_FN3), + PINMUX_DATA(TPU0TO3_MARK, PORT112_FN3), + PINMUX_DATA(IDIN_0_MARK, PORT113_FN3), + PINMUX_DATA(EXTLP_0_MARK, PORT114_FN3), + PINMUX_DATA(OVCN2_0_MARK, PORT115_FN3), + PINMUX_DATA(PWEN_0_MARK, PORT116_FN3), + PINMUX_DATA(OVCN_0_MARK, PORT117_FN3), + PINMUX_DATA(KEYOUT7_MARK, PORT121_FN3), + PINMUX_DATA(KEYOUT6_MARK, PORT122_FN3), + PINMUX_DATA(KEYOUT5_MARK, PORT123_FN3), + PINMUX_DATA(KEYOUT4_MARK, PORT124_FN3), + PINMUX_DATA(KEYOUT3_MARK, PORT125_FN3), + PINMUX_DATA(KEYOUT2_MARK, PORT126_FN3), + PINMUX_DATA(KEYOUT1_MARK, PORT127_FN3), + PINMUX_DATA(KEYOUT0_MARK, PORT128_FN3), + PINMUX_DATA(KEYIN7_MARK, PORT129_FN3), + PINMUX_DATA(KEYIN6_MARK, PORT130_FN3), + PINMUX_DATA(KEYIN5_MARK, PORT131_FN3), + PINMUX_DATA(KEYIN4_MARK, PORT132_FN3), + PINMUX_DATA(KEYIN3_133_MARK, PORT133_FN3, MSEL4CR_18_0), + PINMUX_DATA(KEYIN2_134_MARK, PORT134_FN3, MSEL4CR_18_0), + PINMUX_DATA(KEYIN1_135_MARK, PORT135_FN3, MSEL4CR_18_0), + PINMUX_DATA(KEYIN0_136_MARK, PORT136_FN3, MSEL4CR_18_0), + PINMUX_DATA(TS_SPSYNC2_MARK, PORT137_FN3), + PINMUX_DATA(IROUT_139_MARK, PORT139_FN3), + PINMUX_DATA(IRDA_OUT_MARK, PORT140_FN3), + PINMUX_DATA(IRDA_IN_MARK, PORT141_FN3), + PINMUX_DATA(IRDA_FIRSEL_MARK, PORT142_FN3), + PINMUX_DATA(TS_SDAT2_MARK, PORT145_FN3), + PINMUX_DATA(TS_SDEN2_MARK, PORT146_FN3), + PINMUX_DATA(TS_SCK2_MARK, PORT147_FN3), + + /* Function 4 */ + PINMUX_DATA(SCIFA3_CTS_43_MARK, PORT43_FN4, MSEL3CR_9_0), + PINMUX_DATA(SCIFA3_RTS_44_MARK, PORT44_FN4), + PINMUX_DATA(GP_RX_FLAG_MARK, PORT76_FN4), + PINMUX_DATA(GP_RX_DATA_MARK, PORT77_FN4), + PINMUX_DATA(GP_TX_READY_MARK, PORT78_FN4), + PINMUX_DATA(GP_RX_WAKE_MARK, PORT79_FN4), + PINMUX_DATA(MP_TX_FLAG_MARK, PORT80_FN4), + PINMUX_DATA(MP_TX_DATA_MARK, PORT81_FN4), + PINMUX_DATA(MP_RX_READY_MARK, PORT82_FN4), + PINMUX_DATA(MP_TX_WAKE_MARK, PORT83_FN4), + PINMUX_DATA(MMCD0_0_MARK, PORT84_FN4, MSEL4CR_15_0), + PINMUX_DATA(MMCD0_1_MARK, PORT85_FN4, MSEL4CR_15_0), + PINMUX_DATA(MMCD0_2_MARK, PORT86_FN4, MSEL4CR_15_0), + PINMUX_DATA(MMCD0_3_MARK, PORT87_FN4, MSEL4CR_15_0), + PINMUX_DATA(MMCD0_4_MARK, PORT88_FN4, MSEL4CR_15_0), + PINMUX_DATA(MMCD0_5_MARK, PORT89_FN4, MSEL4CR_15_0), + PINMUX_DATA(MMCD0_6_MARK, PORT90_FN4, MSEL4CR_15_0), + PINMUX_DATA(MMCD0_7_MARK, PORT91_FN4, MSEL4CR_15_0), + PINMUX_DATA(MMCCMD0_MARK, PORT92_FN4, MSEL4CR_15_0), + PINMUX_DATA(SIM_RST_MARK, PORT94_FN4), + PINMUX_DATA(SIM_CLK_MARK, PORT95_FN4), + PINMUX_DATA(SIM_D_MARK, PORT98_FN4), + PINMUX_DATA(MMCCLK0_MARK, PORT99_FN4, MSEL4CR_15_0), + PINMUX_DATA(IDIN_1_113_MARK, PORT113_FN4, MSEL4CR_14_0), + PINMUX_DATA(OVCN_1_114_MARK, PORT114_FN4, MSEL4CR_14_0), + PINMUX_DATA(PWEN_1_115_MARK, PORT115_FN4), + PINMUX_DATA(EXTLP_1_MARK, PORT116_FN4), + PINMUX_DATA(OVCN2_1_MARK, PORT117_FN4), + PINMUX_DATA(KEYIN0_121_MARK, PORT121_FN4, MSEL4CR_18_1), + PINMUX_DATA(KEYIN1_122_MARK, PORT122_FN4, MSEL4CR_18_1), + PINMUX_DATA(KEYIN2_123_MARK, PORT123_FN4, MSEL4CR_18_1), + PINMUX_DATA(KEYIN3_124_MARK, PORT124_FN4, MSEL4CR_18_1), + PINMUX_DATA(PWEN_1_138_MARK, PORT138_FN4), + PINMUX_DATA(IROUT_140_MARK, PORT140_FN4), + PINMUX_DATA(LCDCS_MARK, PORT145_FN4), + PINMUX_DATA(LCDWR_MARK, PORT147_FN4), + PINMUX_DATA(LCDRS_MARK, PORT149_FN4), + PINMUX_DATA(OVCN_1_162_MARK, PORT162_FN4, MSEL4CR_14_1), + + /* Function 5 */ + PINMUX_DATA(GPI0_MARK, PORT41_FN5), + PINMUX_DATA(GPI1_MARK, PORT42_FN5), + PINMUX_DATA(GPO0_MARK, PORT43_FN5), + PINMUX_DATA(GPO1_MARK, PORT44_FN5), + PINMUX_DATA(I2C_SCL3S_MARK, PORT137_FN5, MSEL4CR_16_0), + PINMUX_DATA(I2C_SDA3S_MARK, PORT145_FN5, MSEL4CR_16_0), + PINMUX_DATA(I2C_SCL4S_MARK, PORT146_FN5, MSEL4CR_17_0), + PINMUX_DATA(I2C_SDA4S_MARK, PORT147_FN5, MSEL4CR_17_0), + + /* Function select */ + PINMUX_DATA(LCDC0_SELECT_MARK, MSEL3CR_6_0), + PINMUX_DATA(LCDC1_SELECT_MARK, MSEL3CR_6_1), + + PINMUX_DATA(TS0_1SELECT_MARK, MSEL3CR_21_0, MSEL3CR_20_0), + PINMUX_DATA(TS0_2SELECT_MARK, MSEL3CR_21_0, MSEL3CR_20_1), + PINMUX_DATA(TS1_1SELECT_MARK, MSEL3CR_27_0, MSEL3CR_26_0), + PINMUX_DATA(TS1_2SELECT_MARK, MSEL3CR_27_0, MSEL3CR_26_1), + + PINMUX_DATA(SDENC_CPG_MARK, MSEL4CR_19_0), + PINMUX_DATA(SDENC_DV_CLKI_MARK, MSEL4CR_19_1), + + PINMUX_DATA(MFIv6_MARK, MSEL4CR_6_0), + PINMUX_DATA(MFIv4_MARK, MSEL4CR_6_1), +}; + +#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA) +#define GPIO_PORT_ALL() _190(_GPIO_PORT, , unused) +#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK) + +static struct pinmux_gpio pinmux_gpios[] = { + + /* PORT */ + GPIO_PORT_ALL(), + + /* IRQ */ + GPIO_FN(IRQ0_6), GPIO_FN(IRQ0_162), GPIO_FN(IRQ1), + GPIO_FN(IRQ2_4), GPIO_FN(IRQ2_5), GPIO_FN(IRQ3_8), + GPIO_FN(IRQ3_16), GPIO_FN(IRQ4_17), GPIO_FN(IRQ4_163), + GPIO_FN(IRQ5), GPIO_FN(IRQ6_39), GPIO_FN(IRQ6_164), + GPIO_FN(IRQ7_40), GPIO_FN(IRQ7_167), GPIO_FN(IRQ8_41), + GPIO_FN(IRQ8_168), GPIO_FN(IRQ9_42), GPIO_FN(IRQ9_169), + GPIO_FN(IRQ10), GPIO_FN(IRQ11), GPIO_FN(IRQ12_80), + GPIO_FN(IRQ12_137), GPIO_FN(IRQ13_81), GPIO_FN(IRQ13_145), + GPIO_FN(IRQ14_82), GPIO_FN(IRQ14_146), GPIO_FN(IRQ15_83), + GPIO_FN(IRQ15_147), GPIO_FN(IRQ16_84), GPIO_FN(IRQ16_170), + GPIO_FN(IRQ17), GPIO_FN(IRQ18), GPIO_FN(IRQ19), + GPIO_FN(IRQ20), GPIO_FN(IRQ21), GPIO_FN(IRQ22), + GPIO_FN(IRQ23), GPIO_FN(IRQ24), GPIO_FN(IRQ25), + GPIO_FN(IRQ26_121), GPIO_FN(IRQ26_172), GPIO_FN(IRQ27_122), + GPIO_FN(IRQ27_180), GPIO_FN(IRQ28_123), GPIO_FN(IRQ28_181), + GPIO_FN(IRQ29_129), GPIO_FN(IRQ29_182), GPIO_FN(IRQ30_130), + GPIO_FN(IRQ30_183), GPIO_FN(IRQ31_138), GPIO_FN(IRQ31_184), + + /* MSIOF0 */ + GPIO_FN(MSIOF0_TSYNC), GPIO_FN(MSIOF0_TSCK), GPIO_FN(MSIOF0_RXD), + GPIO_FN(MSIOF0_RSCK), GPIO_FN(MSIOF0_RSYNC), GPIO_FN(MSIOF0_MCK0), + GPIO_FN(MSIOF0_MCK1), GPIO_FN(MSIOF0_SS1), GPIO_FN(MSIOF0_SS2), + GPIO_FN(MSIOF0_TXD), + + /* MSIOF1 */ + GPIO_FN(MSIOF1_TSCK_39), GPIO_FN(MSIOF1_TSCK_88), + GPIO_FN(MSIOF1_TSYNC_40), GPIO_FN(MSIOF1_TSYNC_89), + GPIO_FN(MSIOF1_TXD_41), GPIO_FN(MSIOF1_TXD_90), + GPIO_FN(MSIOF1_RXD_42), GPIO_FN(MSIOF1_RXD_91), + GPIO_FN(MSIOF1_SS1_43), GPIO_FN(MSIOF1_SS1_92), + GPIO_FN(MSIOF1_SS2_44), GPIO_FN(MSIOF1_SS2_93), + GPIO_FN(MSIOF1_RSCK), GPIO_FN(MSIOF1_RSYNC), + GPIO_FN(MSIOF1_MCK0), GPIO_FN(MSIOF1_MCK1), + + /* MSIOF2 */ + GPIO_FN(MSIOF2_RSCK), GPIO_FN(MSIOF2_RSYNC), GPIO_FN(MSIOF2_MCK0), + GPIO_FN(MSIOF2_MCK1), GPIO_FN(MSIOF2_SS1), GPIO_FN(MSIOF2_SS2), + GPIO_FN(MSIOF2_TSYNC), GPIO_FN(MSIOF2_TSCK), GPIO_FN(MSIOF2_RXD), + GPIO_FN(MSIOF2_TXD), + + /* MSIOF3 */ + GPIO_FN(BBIF1_RXD), GPIO_FN(BBIF1_TSYNC), GPIO_FN(BBIF1_TSCK), + GPIO_FN(BBIF1_TXD), GPIO_FN(BBIF1_RSCK), GPIO_FN(BBIF1_RSYNC), + GPIO_FN(BBIF1_FLOW), GPIO_FN(BB_RX_FLOW_N), + + /* MSIOF4 */ + GPIO_FN(BBIF2_TSCK1), GPIO_FN(BBIF2_TSYNC1), + GPIO_FN(BBIF2_TXD1), GPIO_FN(BBIF2_RXD), + + /* FSI */ + GPIO_FN(FSIACK), GPIO_FN(FSIBCK), GPIO_FN(FSIAILR), + GPIO_FN(FSIAIBT), GPIO_FN(FSIAISLD), GPIO_FN(FSIAOMC), + GPIO_FN(FSIAOLR), GPIO_FN(FSIAOBT), GPIO_FN(FSIAOSLD), + GPIO_FN(FSIASPDIF_11), GPIO_FN(FSIASPDIF_15), + + /* FMSI */ + GPIO_FN(FMSOCK), GPIO_FN(FMSOOLR), GPIO_FN(FMSIOLR), + GPIO_FN(FMSOOBT), GPIO_FN(FMSIOBT), GPIO_FN(FMSOSLD), + GPIO_FN(FMSOILR), GPIO_FN(FMSIILR), GPIO_FN(FMSOIBT), + GPIO_FN(FMSIIBT), GPIO_FN(FMSISLD), GPIO_FN(FMSICK), + + /* SCIFA0 */ + GPIO_FN(SCIFA0_TXD), GPIO_FN(SCIFA0_RXD), GPIO_FN(SCIFA0_SCK), + GPIO_FN(SCIFA0_RTS), GPIO_FN(SCIFA0_CTS), + + /* SCIFA1 */ + GPIO_FN(SCIFA1_TXD), GPIO_FN(SCIFA1_RXD), GPIO_FN(SCIFA1_SCK), + GPIO_FN(SCIFA1_RTS), GPIO_FN(SCIFA1_CTS), + + /* SCIFA2 */ + GPIO_FN(SCIFA2_CTS1), GPIO_FN(SCIFA2_RTS1), GPIO_FN(SCIFA2_TXD1), + GPIO_FN(SCIFA2_RXD1), GPIO_FN(SCIFA2_SCK1), + + /* SCIFA3 */ + GPIO_FN(SCIFA3_CTS_43), GPIO_FN(SCIFA3_CTS_140), + GPIO_FN(SCIFA3_RTS_44), GPIO_FN(SCIFA3_RTS_141), + GPIO_FN(SCIFA3_SCK), GPIO_FN(SCIFA3_TXD), + GPIO_FN(SCIFA3_RXD), + + /* SCIFA4 */ + GPIO_FN(SCIFA4_RXD), GPIO_FN(SCIFA4_TXD), + + /* SCIFA5 */ + GPIO_FN(SCIFA5_RXD), GPIO_FN(SCIFA5_TXD), + + /* SCIFB */ + GPIO_FN(SCIFB_SCK), GPIO_FN(SCIFB_RTS), GPIO_FN(SCIFB_CTS), + GPIO_FN(SCIFB_TXD), GPIO_FN(SCIFB_RXD), + + /* CEU */ + GPIO_FN(VIO_HD), GPIO_FN(VIO_CKO1), GPIO_FN(VIO_CKO2), + GPIO_FN(VIO_VD), GPIO_FN(VIO_CLK), GPIO_FN(VIO_FIELD), + GPIO_FN(VIO_CKO), GPIO_FN(VIO_D0), GPIO_FN(VIO_D1), + GPIO_FN(VIO_D2), GPIO_FN(VIO_D3), GPIO_FN(VIO_D4), + GPIO_FN(VIO_D5), GPIO_FN(VIO_D6), GPIO_FN(VIO_D7), + GPIO_FN(VIO_D8), GPIO_FN(VIO_D9), GPIO_FN(VIO_D10), + GPIO_FN(VIO_D11), GPIO_FN(VIO_D12), GPIO_FN(VIO_D13), + GPIO_FN(VIO_D14), GPIO_FN(VIO_D15), + + /* USB0 */ + GPIO_FN(IDIN_0), GPIO_FN(EXTLP_0), GPIO_FN(OVCN2_0), + GPIO_FN(PWEN_0), GPIO_FN(OVCN_0), GPIO_FN(VBUS0_0), + + /* USB1 */ + GPIO_FN(IDIN_1_18), GPIO_FN(IDIN_1_113), + GPIO_FN(OVCN_1_114), GPIO_FN(OVCN_1_162), + GPIO_FN(PWEN_1_115), GPIO_FN(PWEN_1_138), + GPIO_FN(EXTLP_1), GPIO_FN(OVCN2_1), + GPIO_FN(VBUS0_1), + + /* GPIO */ + GPIO_FN(GPI0), GPIO_FN(GPI1), GPIO_FN(GPO0), GPIO_FN(GPO1), + + /* BSC */ + GPIO_FN(BS), GPIO_FN(WE1), GPIO_FN(CKO), + GPIO_FN(WAIT), GPIO_FN(RDWR), + + GPIO_FN(A0), GPIO_FN(A1), GPIO_FN(A2), + GPIO_FN(A3), GPIO_FN(A6), GPIO_FN(A7), + GPIO_FN(A8), GPIO_FN(A9), GPIO_FN(A10), + GPIO_FN(A11), GPIO_FN(A12), GPIO_FN(A13), + GPIO_FN(A14), GPIO_FN(A15), GPIO_FN(A16), + GPIO_FN(A17), GPIO_FN(A18), GPIO_FN(A19), + GPIO_FN(A20), GPIO_FN(A21), GPIO_FN(A22), + GPIO_FN(A23), GPIO_FN(A24), GPIO_FN(A25), + GPIO_FN(A26), + + GPIO_FN(CS0), GPIO_FN(CS2), GPIO_FN(CS4), + GPIO_FN(CS5A), GPIO_FN(CS5B), GPIO_FN(CS6A), + + /* BSC/FLCTL */ + GPIO_FN(RD_FSC), GPIO_FN(WE0_FWE), GPIO_FN(A4_FOE), + GPIO_FN(A5_FCDE), GPIO_FN(D0_NAF0), GPIO_FN(D1_NAF1), + GPIO_FN(D2_NAF2), GPIO_FN(D3_NAF3), GPIO_FN(D4_NAF4), + GPIO_FN(D5_NAF5), GPIO_FN(D6_NAF6), GPIO_FN(D7_NAF7), + GPIO_FN(D8_NAF8), GPIO_FN(D9_NAF9), GPIO_FN(D10_NAF10), + GPIO_FN(D11_NAF11), GPIO_FN(D12_NAF12), GPIO_FN(D13_NAF13), + GPIO_FN(D14_NAF14), GPIO_FN(D15_NAF15), + + /* MMCIF(1) */ + GPIO_FN(MMCD0_0), GPIO_FN(MMCD0_1), GPIO_FN(MMCD0_2), + GPIO_FN(MMCD0_3), GPIO_FN(MMCD0_4), GPIO_FN(MMCD0_5), + GPIO_FN(MMCD0_6), GPIO_FN(MMCD0_7), GPIO_FN(MMCCMD0), + GPIO_FN(MMCCLK0), + + /* MMCIF(2) */ + GPIO_FN(MMCD1_0), GPIO_FN(MMCD1_1), GPIO_FN(MMCD1_2), + GPIO_FN(MMCD1_3), GPIO_FN(MMCD1_4), GPIO_FN(MMCD1_5), + GPIO_FN(MMCD1_6), GPIO_FN(MMCD1_7), GPIO_FN(MMCCLK1), + GPIO_FN(MMCCMD1), + + /* SPU2 */ + GPIO_FN(VINT_I), + + /* FLCTL */ + GPIO_FN(FCE1), GPIO_FN(FCE0), GPIO_FN(FRB), + + /* HSI */ + GPIO_FN(GP_RX_FLAG), GPIO_FN(GP_RX_DATA), GPIO_FN(GP_TX_READY), + GPIO_FN(GP_RX_WAKE), GPIO_FN(MP_TX_FLAG), GPIO_FN(MP_TX_DATA), + GPIO_FN(MP_RX_READY), GPIO_FN(MP_TX_WAKE), + + /* MFI */ + GPIO_FN(MFIv6), + GPIO_FN(MFIv4), + + GPIO_FN(MEMC_BUSCLK_MEMC_A0), GPIO_FN(MEMC_ADV_MEMC_DREQ0), + GPIO_FN(MEMC_WAIT_MEMC_DREQ1), GPIO_FN(MEMC_CS1_MEMC_A1), + GPIO_FN(MEMC_CS0), GPIO_FN(MEMC_NOE), + GPIO_FN(MEMC_NWE), GPIO_FN(MEMC_INT), + + GPIO_FN(MEMC_AD0), GPIO_FN(MEMC_AD1), GPIO_FN(MEMC_AD2), + GPIO_FN(MEMC_AD3), GPIO_FN(MEMC_AD4), GPIO_FN(MEMC_AD5), + GPIO_FN(MEMC_AD6), GPIO_FN(MEMC_AD7), GPIO_FN(MEMC_AD8), + GPIO_FN(MEMC_AD9), GPIO_FN(MEMC_AD10), GPIO_FN(MEMC_AD11), + GPIO_FN(MEMC_AD12), GPIO_FN(MEMC_AD13), GPIO_FN(MEMC_AD14), + GPIO_FN(MEMC_AD15), + + /* SIM */ + GPIO_FN(SIM_RST), GPIO_FN(SIM_CLK), GPIO_FN(SIM_D), + + /* TPU */ + GPIO_FN(TPU0TO0), GPIO_FN(TPU0TO1), GPIO_FN(TPU0TO2_93), + GPIO_FN(TPU0TO2_99), GPIO_FN(TPU0TO3), + + /* I2C2 */ + GPIO_FN(I2C_SCL2), GPIO_FN(I2C_SDA2), + + /* I2C3(1) */ + GPIO_FN(I2C_SCL3), GPIO_FN(I2C_SDA3), + + /* I2C3(2) */ + GPIO_FN(I2C_SCL3S), GPIO_FN(I2C_SDA3S), + + /* I2C4(2) */ + GPIO_FN(I2C_SCL4), GPIO_FN(I2C_SDA4), + + /* I2C4(2) */ + GPIO_FN(I2C_SCL4S), GPIO_FN(I2C_SDA4S), + + /* KEYSC */ + GPIO_FN(KEYOUT0), GPIO_FN(KEYIN0_121), GPIO_FN(KEYIN0_136), + GPIO_FN(KEYOUT1), GPIO_FN(KEYIN1_122), GPIO_FN(KEYIN1_135), + GPIO_FN(KEYOUT2), GPIO_FN(KEYIN2_123), GPIO_FN(KEYIN2_134), + GPIO_FN(KEYOUT3), GPIO_FN(KEYIN3_124), GPIO_FN(KEYIN3_133), + GPIO_FN(KEYOUT4), GPIO_FN(KEYIN4), GPIO_FN(KEYOUT5), + GPIO_FN(KEYIN5), GPIO_FN(KEYOUT6), GPIO_FN(KEYIN6), + GPIO_FN(KEYOUT7), GPIO_FN(KEYIN7), + + /* LCDC */ + GPIO_FN(LCDHSYN), GPIO_FN(LCDCS), GPIO_FN(LCDVSYN), + GPIO_FN(LCDDCK), GPIO_FN(LCDWR), GPIO_FN(LCDRD), + GPIO_FN(LCDDISP), GPIO_FN(LCDRS), GPIO_FN(LCDLCLK), + GPIO_FN(LCDDON), + + GPIO_FN(LCDD0), GPIO_FN(LCDD1), GPIO_FN(LCDD2), + GPIO_FN(LCDD3), GPIO_FN(LCDD4), GPIO_FN(LCDD5), + GPIO_FN(LCDD6), GPIO_FN(LCDD7), GPIO_FN(LCDD8), + GPIO_FN(LCDD9), GPIO_FN(LCDD10), GPIO_FN(LCDD11), + GPIO_FN(LCDD12), GPIO_FN(LCDD13), GPIO_FN(LCDD14), + GPIO_FN(LCDD15), GPIO_FN(LCDD16), GPIO_FN(LCDD17), + GPIO_FN(LCDD18), GPIO_FN(LCDD19), GPIO_FN(LCDD20), + GPIO_FN(LCDD21), GPIO_FN(LCDD22), GPIO_FN(LCDD23), + + /* IRDA */ + GPIO_FN(IRDA_OUT), GPIO_FN(IRDA_IN), GPIO_FN(IRDA_FIRSEL), + GPIO_FN(IROUT_139), GPIO_FN(IROUT_140), + + /* TSIF1 */ + GPIO_FN(TS0_1SELECT), + GPIO_FN(TS0_2SELECT), + GPIO_FN(TS1_1SELECT), + GPIO_FN(TS1_2SELECT), + + GPIO_FN(TS_SPSYNC1), GPIO_FN(TS_SDAT1), + GPIO_FN(TS_SDEN1), GPIO_FN(TS_SCK1), + + /* TSIF2 */ + GPIO_FN(TS_SPSYNC2), GPIO_FN(TS_SDAT2), + GPIO_FN(TS_SDEN2), GPIO_FN(TS_SCK2), + + /* HDMI */ + GPIO_FN(HDMI_HPD), GPIO_FN(HDMI_CEC), + + /* SDHI0 */ + GPIO_FN(SDHICLK0), GPIO_FN(SDHICD0), GPIO_FN(SDHICMD0), + GPIO_FN(SDHIWP0), GPIO_FN(SDHID0_0), GPIO_FN(SDHID0_1), + GPIO_FN(SDHID0_2), GPIO_FN(SDHID0_3), + + /* SDHI1 */ + GPIO_FN(SDHICLK1), GPIO_FN(SDHICMD1), GPIO_FN(SDHID1_0), + GPIO_FN(SDHID1_1), GPIO_FN(SDHID1_2), GPIO_FN(SDHID1_3), + + /* SDHI2 */ + GPIO_FN(SDHICLK2), GPIO_FN(SDHICMD2), GPIO_FN(SDHID2_0), + GPIO_FN(SDHID2_1), GPIO_FN(SDHID2_2), GPIO_FN(SDHID2_3), + + /* SDENC */ + GPIO_FN(SDENC_CPG), + GPIO_FN(SDENC_DV_CLKI), +}; + +/* helper for top 4 bits in PORTnCR */ +#define PCRH(in, in_pd, in_pu, out) \ + 0, (out), (in), 0, \ + 0, 0, 0, 0, \ + 0, 0, (in_pd), 0, \ + 0, 0, (in_pu), 0 + +#define PORTCR(nr, reg) \ + { PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) { \ + PCRH(PORT##nr##_IN, PORT##nr##_IN_PD, \ + PORT##nr##_IN_PU, PORT##nr##_OUT), \ + PORT##nr##_FN0, PORT##nr##_FN1, PORT##nr##_FN2, \ + PORT##nr##_FN3, PORT##nr##_FN4, PORT##nr##_FN5, \ + PORT##nr##_FN6, PORT##nr##_FN7 } \ + } + +static struct pinmux_cfg_reg pinmux_config_regs[] = { + PORTCR(0, 0xE6051000), /* PORT0CR */ + PORTCR(1, 0xE6051001), /* PORT1CR */ + PORTCR(2, 0xE6051002), /* PORT2CR */ + PORTCR(3, 0xE6051003), /* PORT3CR */ + PORTCR(4, 0xE6051004), /* PORT4CR */ + PORTCR(5, 0xE6051005), /* PORT5CR */ + PORTCR(6, 0xE6051006), /* PORT6CR */ + PORTCR(7, 0xE6051007), /* PORT7CR */ + PORTCR(8, 0xE6051008), /* PORT8CR */ + PORTCR(9, 0xE6051009), /* PORT9CR */ + PORTCR(10, 0xE605100A), /* PORT10CR */ + PORTCR(11, 0xE605100B), /* PORT11CR */ + PORTCR(12, 0xE605100C), /* PORT12CR */ + PORTCR(13, 0xE605100D), /* PORT13CR */ + PORTCR(14, 0xE605100E), /* PORT14CR */ + PORTCR(15, 0xE605100F), /* PORT15CR */ + PORTCR(16, 0xE6051010), /* PORT16CR */ + PORTCR(17, 0xE6051011), /* PORT17CR */ + PORTCR(18, 0xE6051012), /* PORT18CR */ + PORTCR(19, 0xE6051013), /* PORT19CR */ + PORTCR(20, 0xE6051014), /* PORT20CR */ + PORTCR(21, 0xE6051015), /* PORT21CR */ + PORTCR(22, 0xE6051016), /* PORT22CR */ + PORTCR(23, 0xE6051017), /* PORT23CR */ + PORTCR(24, 0xE6051018), /* PORT24CR */ + PORTCR(25, 0xE6051019), /* PORT25CR */ + PORTCR(26, 0xE605101A), /* PORT26CR */ + PORTCR(27, 0xE605101B), /* PORT27CR */ + PORTCR(28, 0xE605101C), /* PORT28CR */ + PORTCR(29, 0xE605101D), /* PORT29CR */ + PORTCR(30, 0xE605101E), /* PORT30CR */ + PORTCR(31, 0xE605101F), /* PORT31CR */ + PORTCR(32, 0xE6051020), /* PORT32CR */ + PORTCR(33, 0xE6051021), /* PORT33CR */ + PORTCR(34, 0xE6051022), /* PORT34CR */ + PORTCR(35, 0xE6051023), /* PORT35CR */ + PORTCR(36, 0xE6051024), /* PORT36CR */ + PORTCR(37, 0xE6051025), /* PORT37CR */ + PORTCR(38, 0xE6051026), /* PORT38CR */ + PORTCR(39, 0xE6051027), /* PORT39CR */ + PORTCR(40, 0xE6051028), /* PORT40CR */ + PORTCR(41, 0xE6051029), /* PORT41CR */ + PORTCR(42, 0xE605102A), /* PORT42CR */ + PORTCR(43, 0xE605102B), /* PORT43CR */ + PORTCR(44, 0xE605102C), /* PORT44CR */ + PORTCR(45, 0xE605102D), /* PORT45CR */ + PORTCR(46, 0xE605202E), /* PORT46CR */ + PORTCR(47, 0xE605202F), /* PORT47CR */ + PORTCR(48, 0xE6052030), /* PORT48CR */ + PORTCR(49, 0xE6052031), /* PORT49CR */ + PORTCR(50, 0xE6052032), /* PORT50CR */ + PORTCR(51, 0xE6052033), /* PORT51CR */ + PORTCR(52, 0xE6052034), /* PORT52CR */ + PORTCR(53, 0xE6052035), /* PORT53CR */ + PORTCR(54, 0xE6052036), /* PORT54CR */ + PORTCR(55, 0xE6052037), /* PORT55CR */ + PORTCR(56, 0xE6052038), /* PORT56CR */ + PORTCR(57, 0xE6052039), /* PORT57CR */ + PORTCR(58, 0xE605203A), /* PORT58CR */ + PORTCR(59, 0xE605203B), /* PORT59CR */ + PORTCR(60, 0xE605203C), /* PORT60CR */ + PORTCR(61, 0xE605203D), /* PORT61CR */ + PORTCR(62, 0xE605203E), /* PORT62CR */ + PORTCR(63, 0xE605203F), /* PORT63CR */ + PORTCR(64, 0xE6052040), /* PORT64CR */ + PORTCR(65, 0xE6052041), /* PORT65CR */ + PORTCR(66, 0xE6052042), /* PORT66CR */ + PORTCR(67, 0xE6052043), /* PORT67CR */ + PORTCR(68, 0xE6052044), /* PORT68CR */ + PORTCR(69, 0xE6052045), /* PORT69CR */ + PORTCR(70, 0xE6052046), /* PORT70CR */ + PORTCR(71, 0xE6052047), /* PORT71CR */ + PORTCR(72, 0xE6052048), /* PORT72CR */ + PORTCR(73, 0xE6052049), /* PORT73CR */ + PORTCR(74, 0xE605204A), /* PORT74CR */ + PORTCR(75, 0xE605204B), /* PORT75CR */ + PORTCR(76, 0xE605004C), /* PORT76CR */ + PORTCR(77, 0xE605004D), /* PORT77CR */ + PORTCR(78, 0xE605004E), /* PORT78CR */ + PORTCR(79, 0xE605004F), /* PORT79CR */ + PORTCR(80, 0xE6050050), /* PORT80CR */ + PORTCR(81, 0xE6050051), /* PORT81CR */ + PORTCR(82, 0xE6050052), /* PORT82CR */ + PORTCR(83, 0xE6050053), /* PORT83CR */ + PORTCR(84, 0xE6050054), /* PORT84CR */ + PORTCR(85, 0xE6050055), /* PORT85CR */ + PORTCR(86, 0xE6050056), /* PORT86CR */ + PORTCR(87, 0xE6050057), /* PORT87CR */ + PORTCR(88, 0xE6050058), /* PORT88CR */ + PORTCR(89, 0xE6050059), /* PORT89CR */ + PORTCR(90, 0xE605005A), /* PORT90CR */ + PORTCR(91, 0xE605005B), /* PORT91CR */ + PORTCR(92, 0xE605005C), /* PORT92CR */ + PORTCR(93, 0xE605005D), /* PORT93CR */ + PORTCR(94, 0xE605005E), /* PORT94CR */ + PORTCR(95, 0xE605005F), /* PORT95CR */ + PORTCR(96, 0xE6050060), /* PORT96CR */ + PORTCR(97, 0xE6050061), /* PORT97CR */ + PORTCR(98, 0xE6050062), /* PORT98CR */ + PORTCR(99, 0xE6050063), /* PORT99CR */ + PORTCR(100, 0xE6053064), /* PORT100CR */ + PORTCR(101, 0xE6053065), /* PORT101CR */ + PORTCR(102, 0xE6053066), /* PORT102CR */ + PORTCR(103, 0xE6053067), /* PORT103CR */ + PORTCR(104, 0xE6053068), /* PORT104CR */ + PORTCR(105, 0xE6053069), /* PORT105CR */ + PORTCR(106, 0xE605306A), /* PORT106CR */ + PORTCR(107, 0xE605306B), /* PORT107CR */ + PORTCR(108, 0xE605306C), /* PORT108CR */ + PORTCR(109, 0xE605306D), /* PORT109CR */ + PORTCR(110, 0xE605306E), /* PORT110CR */ + PORTCR(111, 0xE605306F), /* PORT111CR */ + PORTCR(112, 0xE6053070), /* PORT112CR */ + PORTCR(113, 0xE6053071), /* PORT113CR */ + PORTCR(114, 0xE6053072), /* PORT114CR */ + PORTCR(115, 0xE6053073), /* PORT115CR */ + PORTCR(116, 0xE6053074), /* PORT116CR */ + PORTCR(117, 0xE6053075), /* PORT117CR */ + PORTCR(118, 0xE6053076), /* PORT118CR */ + PORTCR(119, 0xE6053077), /* PORT119CR */ + PORTCR(120, 0xE6053078), /* PORT120CR */ + PORTCR(121, 0xE6050079), /* PORT121CR */ + PORTCR(122, 0xE605007A), /* PORT122CR */ + PORTCR(123, 0xE605007B), /* PORT123CR */ + PORTCR(124, 0xE605007C), /* PORT124CR */ + PORTCR(125, 0xE605007D), /* PORT125CR */ + PORTCR(126, 0xE605007E), /* PORT126CR */ + PORTCR(127, 0xE605007F), /* PORT127CR */ + PORTCR(128, 0xE6050080), /* PORT128CR */ + PORTCR(129, 0xE6050081), /* PORT129CR */ + PORTCR(130, 0xE6050082), /* PORT130CR */ + PORTCR(131, 0xE6050083), /* PORT131CR */ + PORTCR(132, 0xE6050084), /* PORT132CR */ + PORTCR(133, 0xE6050085), /* PORT133CR */ + PORTCR(134, 0xE6050086), /* PORT134CR */ + PORTCR(135, 0xE6050087), /* PORT135CR */ + PORTCR(136, 0xE6050088), /* PORT136CR */ + PORTCR(137, 0xE6050089), /* PORT137CR */ + PORTCR(138, 0xE605008A), /* PORT138CR */ + PORTCR(139, 0xE605008B), /* PORT139CR */ + PORTCR(140, 0xE605008C), /* PORT140CR */ + PORTCR(141, 0xE605008D), /* PORT141CR */ + PORTCR(142, 0xE605008E), /* PORT142CR */ + PORTCR(143, 0xE605008F), /* PORT143CR */ + PORTCR(144, 0xE6050090), /* PORT144CR */ + PORTCR(145, 0xE6050091), /* PORT145CR */ + PORTCR(146, 0xE6050092), /* PORT146CR */ + PORTCR(147, 0xE6050093), /* PORT147CR */ + PORTCR(148, 0xE6050094), /* PORT148CR */ + PORTCR(149, 0xE6050095), /* PORT149CR */ + PORTCR(150, 0xE6050096), /* PORT150CR */ + PORTCR(151, 0xE6050097), /* PORT151CR */ + PORTCR(152, 0xE6053098), /* PORT152CR */ + PORTCR(153, 0xE6053099), /* PORT153CR */ + PORTCR(154, 0xE605309A), /* PORT154CR */ + PORTCR(155, 0xE605309B), /* PORT155CR */ + PORTCR(156, 0xE605009C), /* PORT156CR */ + PORTCR(157, 0xE605009D), /* PORT157CR */ + PORTCR(158, 0xE605009E), /* PORT158CR */ + PORTCR(159, 0xE605009F), /* PORT159CR */ + PORTCR(160, 0xE60500A0), /* PORT160CR */ + PORTCR(161, 0xE60500A1), /* PORT161CR */ + PORTCR(162, 0xE60500A2), /* PORT162CR */ + PORTCR(163, 0xE60500A3), /* PORT163CR */ + PORTCR(164, 0xE60500A4), /* PORT164CR */ + PORTCR(165, 0xE60500A5), /* PORT165CR */ + PORTCR(166, 0xE60500A6), /* PORT166CR */ + PORTCR(167, 0xE60520A7), /* PORT167CR */ + PORTCR(168, 0xE60520A8), /* PORT168CR */ + PORTCR(169, 0xE60520A9), /* PORT169CR */ + PORTCR(170, 0xE60520AA), /* PORT170CR */ + PORTCR(171, 0xE60520AB), /* PORT171CR */ + PORTCR(172, 0xE60520AC), /* PORT172CR */ + PORTCR(173, 0xE60520AD), /* PORT173CR */ + PORTCR(174, 0xE60520AE), /* PORT174CR */ + PORTCR(175, 0xE60520AF), /* PORT175CR */ + PORTCR(176, 0xE60520B0), /* PORT176CR */ + PORTCR(177, 0xE60520B1), /* PORT177CR */ + PORTCR(178, 0xE60520B2), /* PORT178CR */ + PORTCR(179, 0xE60520B3), /* PORT179CR */ + PORTCR(180, 0xE60520B4), /* PORT180CR */ + PORTCR(181, 0xE60520B5), /* PORT181CR */ + PORTCR(182, 0xE60520B6), /* PORT182CR */ + PORTCR(183, 0xE60520B7), /* PORT183CR */ + PORTCR(184, 0xE60520B8), /* PORT184CR */ + PORTCR(185, 0xE60520B9), /* PORT185CR */ + PORTCR(186, 0xE60520BA), /* PORT186CR */ + PORTCR(187, 0xE60520BB), /* PORT187CR */ + PORTCR(188, 0xE60520BC), /* PORT188CR */ + PORTCR(189, 0xE60520BD), /* PORT189CR */ + PORTCR(190, 0xE60520BE), /* PORT190CR */ + + { PINMUX_CFG_REG("MSEL1CR", 0xE605800C, 32, 1) { + MSEL1CR_31_0, MSEL1CR_31_1, + MSEL1CR_30_0, MSEL1CR_30_1, + MSEL1CR_29_0, MSEL1CR_29_1, + MSEL1CR_28_0, MSEL1CR_28_1, + MSEL1CR_27_0, MSEL1CR_27_1, + MSEL1CR_26_0, MSEL1CR_26_1, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + MSEL1CR_16_0, MSEL1CR_16_1, + MSEL1CR_15_0, MSEL1CR_15_1, + MSEL1CR_14_0, MSEL1CR_14_1, + MSEL1CR_13_0, MSEL1CR_13_1, + MSEL1CR_12_0, MSEL1CR_12_1, + 0, 0, 0, 0, + MSEL1CR_9_0, MSEL1CR_9_1, + MSEL1CR_8_0, MSEL1CR_8_1, + MSEL1CR_7_0, MSEL1CR_7_1, + MSEL1CR_6_0, MSEL1CR_6_1, + 0, 0, + MSEL1CR_4_0, MSEL1CR_4_1, + MSEL1CR_3_0, MSEL1CR_3_1, + MSEL1CR_2_0, MSEL1CR_2_1, + 0, 0, + MSEL1CR_0_0, MSEL1CR_0_1, + } + }, + { PINMUX_CFG_REG("MSEL3CR", 0xE6058020, 32, 1) { + 0, 0, 0, 0, + 0, 0, 0, 0, + MSEL3CR_27_0, MSEL3CR_27_1, + MSEL3CR_26_0, MSEL3CR_26_1, + 0, 0, 0, 0, + 0, 0, 0, 0, + MSEL3CR_21_0, MSEL3CR_21_1, + MSEL3CR_20_0, MSEL3CR_20_1, + 0, 0, 0, 0, + 0, 0, 0, 0, + MSEL3CR_15_0, MSEL3CR_15_1, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, + MSEL3CR_9_0, MSEL3CR_9_1, + 0, 0, 0, 0, + MSEL3CR_6_0, MSEL3CR_6_1, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + } + }, + { PINMUX_CFG_REG("MSEL4CR", 0xE6058024, 32, 1) { + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + MSEL4CR_19_0, MSEL4CR_19_1, + MSEL4CR_18_0, MSEL4CR_18_1, + MSEL4CR_17_0, MSEL4CR_17_1, + MSEL4CR_16_0, MSEL4CR_16_1, + MSEL4CR_15_0, MSEL4CR_15_1, + MSEL4CR_14_0, MSEL4CR_14_1, + 0, 0, 0, 0, + 0, 0, + MSEL4CR_10_0, MSEL4CR_10_1, + 0, 0, 0, 0, + 0, 0, + MSEL4CR_6_0, MSEL4CR_6_1, + 0, 0, + MSEL4CR_4_0, MSEL4CR_4_1, + 0, 0, 0, 0, + MSEL4CR_1_0, MSEL4CR_1_1, + 0, 0, + } + }, + { }, +}; + +static struct pinmux_data_reg pinmux_data_regs[] = { + { PINMUX_DATA_REG("PORTL095_064DR", 0xE6054008, 32) { + PORT95_DATA, PORT94_DATA, PORT93_DATA, PORT92_DATA, + PORT91_DATA, PORT90_DATA, PORT89_DATA, PORT88_DATA, + PORT87_DATA, PORT86_DATA, PORT85_DATA, PORT84_DATA, + PORT83_DATA, PORT82_DATA, PORT81_DATA, PORT80_DATA, + PORT79_DATA, PORT78_DATA, PORT77_DATA, PORT76_DATA, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + } + }, + { PINMUX_DATA_REG("PORTL127_096DR", 0xE605400C, 32) { + PORT127_DATA, PORT126_DATA, PORT125_DATA, PORT124_DATA, + PORT123_DATA, PORT122_DATA, PORT121_DATA, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + PORT99_DATA, PORT98_DATA, PORT97_DATA, PORT96_DATA, + } + }, + { PINMUX_DATA_REG("PORTL159_128DR", 0xE6054010, 32) { + PORT159_DATA, PORT158_DATA, PORT157_DATA, PORT156_DATA, + 0, 0, 0, 0, + PORT151_DATA, PORT150_DATA, PORT149_DATA, PORT148_DATA, + PORT147_DATA, PORT146_DATA, PORT145_DATA, PORT144_DATA, + PORT143_DATA, PORT142_DATA, PORT141_DATA, PORT140_DATA, + PORT139_DATA, PORT138_DATA, PORT137_DATA, PORT136_DATA, + PORT135_DATA, PORT134_DATA, PORT133_DATA, PORT132_DATA, + PORT131_DATA, PORT130_DATA, PORT129_DATA, PORT128_DATA, + } + }, + { PINMUX_DATA_REG("PORTL191_160DR", 0xE6054014, 32) { + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, PORT166_DATA, PORT165_DATA, PORT164_DATA, + PORT163_DATA, PORT162_DATA, PORT161_DATA, PORT160_DATA, + } + }, + { PINMUX_DATA_REG("PORTD031_000DR", 0xE6055000, 32) { + PORT31_DATA, PORT30_DATA, PORT29_DATA, PORT28_DATA, + PORT27_DATA, PORT26_DATA, PORT25_DATA, PORT24_DATA, + PORT23_DATA, PORT22_DATA, PORT21_DATA, PORT20_DATA, + PORT19_DATA, PORT18_DATA, PORT17_DATA, PORT16_DATA, + PORT15_DATA, PORT14_DATA, PORT13_DATA, PORT12_DATA, + PORT11_DATA, PORT10_DATA, PORT9_DATA, PORT8_DATA, + PORT7_DATA, PORT6_DATA, PORT5_DATA, PORT4_DATA, + PORT3_DATA, PORT2_DATA, PORT1_DATA, PORT0_DATA, + } + }, + { PINMUX_DATA_REG("PORTD063_032DR", 0xE6055004, 32) { + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, PORT45_DATA, PORT44_DATA, + PORT43_DATA, PORT42_DATA, PORT41_DATA, PORT40_DATA, + PORT39_DATA, PORT38_DATA, PORT37_DATA, PORT36_DATA, + PORT35_DATA, PORT34_DATA, PORT33_DATA, PORT32_DATA, + } + }, + { PINMUX_DATA_REG("PORTR063_032DR", 0xE6056004, 32) { + PORT63_DATA, PORT62_DATA, PORT61_DATA, PORT60_DATA, + PORT59_DATA, PORT58_DATA, PORT57_DATA, PORT56_DATA, + PORT55_DATA, PORT54_DATA, PORT53_DATA, PORT52_DATA, + PORT51_DATA, PORT50_DATA, PORT49_DATA, PORT48_DATA, + PORT47_DATA, PORT46_DATA, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + } + }, + { PINMUX_DATA_REG("PORTR095_064DR", 0xE6056008, 32) { + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + PORT75_DATA, PORT74_DATA, PORT73_DATA, PORT72_DATA, + PORT71_DATA, PORT70_DATA, PORT69_DATA, PORT68_DATA, + PORT67_DATA, PORT66_DATA, PORT65_DATA, PORT64_DATA, + } + }, + { PINMUX_DATA_REG("PORTR191_160DR", 0xE6056014, 32) { + 0, PORT190_DATA, PORT189_DATA, PORT188_DATA, + PORT187_DATA, PORT186_DATA, PORT185_DATA, PORT184_DATA, + PORT183_DATA, PORT182_DATA, PORT181_DATA, PORT180_DATA, + PORT179_DATA, PORT178_DATA, PORT177_DATA, PORT176_DATA, + PORT175_DATA, PORT174_DATA, PORT173_DATA, PORT172_DATA, + PORT171_DATA, PORT170_DATA, PORT169_DATA, PORT168_DATA, + PORT167_DATA, 0, 0, 0, + 0, 0, 0, 0, + } + }, + { PINMUX_DATA_REG("PORTU127_096DR", 0xE605700C, 32) { + 0, 0, 0, 0, + 0, 0, 0, PORT120_DATA, + PORT119_DATA, PORT118_DATA, PORT117_DATA, PORT116_DATA, + PORT115_DATA, PORT114_DATA, PORT113_DATA, PORT112_DATA, + PORT111_DATA, PORT110_DATA, PORT109_DATA, PORT108_DATA, + PORT107_DATA, PORT106_DATA, PORT105_DATA, PORT104_DATA, + PORT103_DATA, PORT102_DATA, PORT101_DATA, PORT100_DATA, + 0, 0, 0, 0, + } + }, + { PINMUX_DATA_REG("PORTU159_128DR", 0xE6057010, 32) { + 0, 0, 0, 0, + PORT155_DATA, PORT154_DATA, PORT153_DATA, PORT152_DATA, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + } + }, + { }, +}; + +static struct pinmux_info sh7372_pinmux_info = { + .name = "sh7372_pfc", + .reserved_id = PINMUX_RESERVED, + .data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END }, + .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END }, + .input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END }, + .input_pd = { PINMUX_INPUT_PULLDOWN_BEGIN, PINMUX_INPUT_PULLDOWN_END }, + .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END }, + .mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END }, + .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END }, + + .first_gpio = GPIO_PORT0, + .last_gpio = GPIO_FN_SDENC_DV_CLKI, + + .gpios = pinmux_gpios, + .cfg_regs = pinmux_config_regs, + .data_regs = pinmux_data_regs, + + .gpio_data = pinmux_data, + .gpio_data_size = ARRAY_SIZE(pinmux_data), +}; + +void sh7372_pinmux_init(void) +{ + register_pinmux(&sh7372_pinmux_info); +} diff --git a/arch/arm/mach-shmobile/pfc-sh7377.c b/arch/arm/mach-shmobile/pfc-sh7377.c new file mode 100644 index 00000000000..613e6842ad0 --- /dev/null +++ b/arch/arm/mach-shmobile/pfc-sh7377.c @@ -0,0 +1,1767 @@ +/* + * sh7377 processor support - PFC hardware block + * + * Copyright (C) 2010 NISHIMOTO Hiroki + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the + * License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/gpio.h> +#include <mach/sh7377.h> + +#define _1(fn, pfx, sfx) fn(pfx, sfx) + +#define _10(fn, pfx, sfx) \ + _1(fn, pfx##0, sfx), _1(fn, pfx##1, sfx), \ + _1(fn, pfx##2, sfx), _1(fn, pfx##3, sfx), \ + _1(fn, pfx##4, sfx), _1(fn, pfx##5, sfx), \ + _1(fn, pfx##6, sfx), _1(fn, pfx##7, sfx), \ + _1(fn, pfx##8, sfx), _1(fn, pfx##9, sfx) + +#define _90(fn, pfx, sfx) \ + _10(fn, pfx##1, sfx), _10(fn, pfx##2, sfx), \ + _10(fn, pfx##3, sfx), _10(fn, pfx##4, sfx), \ + _10(fn, pfx##5, sfx), _10(fn, pfx##6, sfx), \ + _10(fn, pfx##7, sfx), _10(fn, pfx##8, sfx), \ + _10(fn, pfx##9, sfx) + +#define _265(fn, pfx, sfx) \ + _10(fn, pfx, sfx), _90(fn, pfx, sfx), \ + _10(fn, pfx##10, sfx), \ + _1(fn, pfx##110, sfx), _1(fn, pfx##111, sfx), \ + _1(fn, pfx##112, sfx), _1(fn, pfx##113, sfx), \ + _1(fn, pfx##114, sfx), _1(fn, pfx##115, sfx), \ + _1(fn, pfx##116, sfx), _1(fn, pfx##117, sfx), \ + _1(fn, pfx##118, sfx), \ + _1(fn, pfx##128, sfx), _1(fn, pfx##129, sfx), \ + _10(fn, pfx##13, sfx), _10(fn, pfx##14, sfx), \ + _10(fn, pfx##15, sfx), \ + _1(fn, pfx##160, sfx), _1(fn, pfx##161, sfx), \ + _1(fn, pfx##162, sfx), _1(fn, pfx##163, sfx), \ + _1(fn, pfx##164, sfx), \ + _1(fn, pfx##192, sfx), _1(fn, pfx##193, sfx), \ + _1(fn, pfx##194, sfx), _1(fn, pfx##195, sfx), \ + _1(fn, pfx##196, sfx), _1(fn, pfx##197, sfx), \ + _1(fn, pfx##198, sfx), _1(fn, pfx##199, sfx), \ + _10(fn, pfx##20, sfx), _10(fn, pfx##21, sfx), \ + _10(fn, pfx##22, sfx), _10(fn, pfx##23, sfx), \ + _10(fn, pfx##24, sfx), _10(fn, pfx##25, sfx), \ + _1(fn, pfx##260, sfx), _1(fn, pfx##261, sfx), \ + _1(fn, pfx##262, sfx), _1(fn, pfx##263, sfx), \ + _1(fn, pfx##264, sfx) + +#define _PORT(pfx, sfx) pfx##_##sfx +#define PORT_265(str) _265(_PORT, PORT, str) + +enum { + PINMUX_RESERVED = 0, + + PINMUX_DATA_BEGIN, + PORT_265(DATA), /* PORT0_DATA -> PORT264_DATA */ + PINMUX_DATA_END, + + PINMUX_INPUT_BEGIN, + PORT_265(IN), /* PORT0_IN -> PORT264_IN */ + PINMUX_INPUT_END, + + PINMUX_INPUT_PULLUP_BEGIN, + PORT_265(IN_PU), /* PORT0_IN_PU -> PORT264_IN_PU */ + PINMUX_INPUT_PULLUP_END, + + PINMUX_INPUT_PULLDOWN_BEGIN, + PORT_265(IN_PD), /* PORT0_IN_PD -> PORT264_IN_PD */ + PINMUX_INPUT_PULLDOWN_END, + + PINMUX_OUTPUT_BEGIN, + PORT_265(OUT), /* PORT0_OUT -> PORT264_OUT */ + PINMUX_OUTPUT_END, + + PINMUX_FUNCTION_BEGIN, + PORT_265(FN_IN), /* PORT0_FN_IN -> PORT264_FN_IN */ + PORT_265(FN_OUT), /* PORT0_FN_OUT -> PORT264_FN_OUT */ + PORT_265(FN0), /* PORT0_FN0 -> PORT264_FN0 */ + PORT_265(FN1), /* PORT0_FN1 -> PORT264_FN1 */ + PORT_265(FN2), /* PORT0_FN2 -> PORT264_FN2 */ + PORT_265(FN3), /* PORT0_FN3 -> PORT264_FN3 */ + PORT_265(FN4), /* PORT0_FN4 -> PORT264_FN4 */ + PORT_265(FN5), /* PORT0_FN5 -> PORT264_FN5 */ + PORT_265(FN6), /* PORT0_FN6 -> PORT264_FN6 */ + PORT_265(FN7), /* PORT0_FN7 -> PORT264_FN7 */ + + MSELBCR_MSEL17_1, MSELBCR_MSEL17_0, + MSELBCR_MSEL16_1, MSELBCR_MSEL16_0, + PINMUX_FUNCTION_END, + + PINMUX_MARK_BEGIN, + /* Special Pull-up / Pull-down Functions */ + PORT66_KEYIN0_PU_MARK, PORT67_KEYIN1_PU_MARK, + PORT68_KEYIN2_PU_MARK, PORT69_KEYIN3_PU_MARK, + PORT70_KEYIN4_PU_MARK, PORT71_KEYIN5_PU_MARK, + PORT72_KEYIN6_PU_MARK, + + /* 55-1 */ + VBUS_0_MARK, + CPORT0_MARK, + CPORT1_MARK, + CPORT2_MARK, + CPORT3_MARK, + CPORT4_MARK, + CPORT5_MARK, + CPORT6_MARK, + CPORT7_MARK, + CPORT8_MARK, + CPORT9_MARK, + CPORT10_MARK, + CPORT11_MARK, SIN2_MARK, + CPORT12_MARK, XCTS2_MARK, + CPORT13_MARK, RFSPO4_MARK, + CPORT14_MARK, RFSPO5_MARK, + CPORT15_MARK, SCIFA0_SCK_MARK, GPS_AGC2_MARK, + CPORT16_MARK, SCIFA0_TXD_MARK, GPS_AGC3_MARK, + CPORT17_IC_OE_MARK, SOUT2_MARK, + CPORT18_MARK, XRTS2_MARK, PORT19_VIO_CKO2_MARK, + CPORT19_MPORT1_MARK, + CPORT20_MARK, RFSPO6_MARK, + CPORT21_MARK, STATUS0_MARK, + CPORT22_MARK, STATUS1_MARK, + CPORT23_MARK, STATUS2_MARK, RFSPO7_MARK, + B_SYNLD1_MARK, + B_SYNLD2_MARK, SYSENMSK_MARK, + XMAINPS_MARK, + XDIVPS_MARK, + XIDRST_MARK, + IDCLK_MARK, IC_DP_MARK, + IDIO_MARK, IC_DM_MARK, + SOUT1_MARK, SCIFA4_TXD_MARK, M02_BERDAT_MARK, + SIN1_MARK, SCIFA4_RXD_MARK, XWUP_MARK, + XRTS1_MARK, SCIFA4_RTS_MARK, M03_BERCLK_MARK, + XCTS1_MARK, SCIFA4_CTS_MARK, + PCMCLKO_MARK, + SYNC8KO_MARK, + + /* 55-2 */ + DNPCM_A_MARK, + UPPCM_A_MARK, + VACK_MARK, + XTALB1L_MARK, + GPS_AGC1_MARK, SCIFA0_RTS_MARK, + GPS_AGC4_MARK, SCIFA0_RXD_MARK, + GPS_PWRDOWN_MARK, SCIFA0_CTS_MARK, + GPS_IM_MARK, + GPS_IS_MARK, + GPS_QM_MARK, + GPS_QS_MARK, + FMSOCK_MARK, PORT49_IRDA_OUT_MARK, PORT49_IROUT_MARK, + FMSOOLR_MARK, BBIF2_TSYNC2_MARK, TPU2TO2_MARK, IPORT3_MARK, + FMSIOLR_MARK, + FMSOOBT_MARK, BBIF2_TSCK2_MARK, TPU2TO3_MARK, OPORT1_MARK, + FMSIOBT_MARK, + FMSOSLD_MARK, BBIF2_TXD2_MARK, OPORT2_MARK, + FMSOILR_MARK, PORT53_IRDA_IN_MARK, TPU3TO3_MARK, OPORT3_MARK, + FMSIILR_MARK, + FMSOIBT_MARK, PORT54_IRDA_FIRSEL_MARK, TPU3TO2_MARK, FMSIIBT_MARK, + FMSISLD_MARK, MFG0_OUT1_MARK, TPU0TO0_MARK, + A0_EA0_MARK, BS_MARK, + A12_EA12_MARK, PORT58_VIO_CKOR_MARK, TPU4TO2_MARK, + A13_EA13_MARK, PORT59_IROUT_MARK, MFG0_OUT2_MARK, TPU0TO1_MARK, + A14_EA14_MARK, PORT60_KEYOUT5_MARK, + A15_EA15_MARK, PORT61_KEYOUT4_MARK, + A16_EA16_MARK, PORT62_KEYOUT3_MARK, MSIOF0_SS1_MARK, + A17_EA17_MARK, PORT63_KEYOUT2_MARK, MSIOF0_TSYNC_MARK, + A18_EA18_MARK, PORT64_KEYOUT1_MARK, MSIOF0_TSCK_MARK, + A19_EA19_MARK, PORT65_KEYOUT0_MARK, MSIOF0_TXD_MARK, + A20_EA20_MARK, PORT66_KEYIN0_MARK, MSIOF0_RSCK_MARK, + A21_EA21_MARK, PORT67_KEYIN1_MARK, MSIOF0_RSYNC_MARK, + A22_EA22_MARK, PORT68_KEYIN2_MARK, MSIOF0_MCK0_MARK, + A23_EA23_MARK, PORT69_KEYIN3_MARK, MSIOF0_MCK1_MARK, + A24_EA24_MARK, PORT70_KEYIN4_MARK, MSIOF0_RXD_MARK, + A25_EA25_MARK, PORT71_KEYIN5_MARK, MSIOF0_SS2_MARK, + A26_MARK, PORT72_KEYIN6_MARK, + D0_ED0_NAF0_MARK, + D1_ED1_NAF1_MARK, + D2_ED2_NAF2_MARK, + D3_ED3_NAF3_MARK, + D4_ED4_NAF4_MARK, + D5_ED5_NAF5_MARK, + D6_ED6_NAF6_MARK, + D7_ED7_NAF7_MARK, + D8_ED8_NAF8_MARK, + D9_ED9_NAF9_MARK, + D10_ED10_NAF10_MARK, + D11_ED11_NAF11_MARK, + D12_ED12_NAF12_MARK, + D13_ED13_NAF13_MARK, + D14_ED14_NAF14_MARK, + D15_ED15_NAF15_MARK, + CS4_MARK, + CS5A_MARK, FMSICK_MARK, + CS5B_MARK, FCE1_MARK, + + /* 55-3 */ + CS6B_MARK, XCS2_MARK, CS6A_MARK, DACK0_MARK, + FCE0_MARK, + WAIT_MARK, DREQ0_MARK, + RD_XRD_MARK, + WE0_XWR0_FWE_MARK, + WE1_XWR1_MARK, + FRB_MARK, + CKO_MARK, + NBRSTOUT_MARK, + NBRST_MARK, + GPS_EPPSIN_MARK, + LATCHPULSE_MARK, + LTESIGNAL_MARK, + LEGACYSTATE_MARK, + TCKON_MARK, + VIO_VD_MARK, PORT128_KEYOUT0_MARK, IPORT0_MARK, + VIO_HD_MARK, PORT129_KEYOUT1_MARK, IPORT1_MARK, + VIO_D0_MARK, PORT130_KEYOUT2_MARK, PORT130_MSIOF2_RXD_MARK, + VIO_D1_MARK, PORT131_KEYOUT3_MARK, PORT131_MSIOF2_SS1_MARK, + VIO_D2_MARK, PORT132_KEYOUT4_MARK, PORT132_MSIOF2_SS2_MARK, + VIO_D3_MARK, PORT133_KEYOUT5_MARK, PORT133_MSIOF2_TSYNC_MARK, + VIO_D4_MARK, PORT134_KEYIN0_MARK, PORT134_MSIOF2_TXD_MARK, + VIO_D5_MARK, PORT135_KEYIN1_MARK, PORT135_MSIOF2_TSCK_MARK, + VIO_D6_MARK, PORT136_KEYIN2_MARK, + VIO_D7_MARK, PORT137_KEYIN3_MARK, + VIO_D8_MARK, M9_SLCD_A01_MARK, PORT138_FSIAOMC_MARK, + VIO_D9_MARK, M10_SLCD_CK1_MARK, PORT139_FSIAOLR_MARK, + VIO_D10_MARK, M11_SLCD_SO1_MARK, TPU0TO2_MARK, PORT140_FSIAOBT_MARK, + VIO_D11_MARK, M12_SLCD_CE1_MARK, TPU0TO3_MARK, PORT141_FSIAOSLD_MARK, + VIO_D12_MARK, M13_BSW_MARK, PORT142_FSIACK_MARK, + VIO_D13_MARK, M14_GSW_MARK, PORT143_FSIAILR_MARK, + VIO_D14_MARK, M15_RSW_MARK, PORT144_FSIAIBT_MARK, + VIO_D15_MARK, TPU1TO3_MARK, PORT145_FSIAISLD_MARK, + VIO_CLK_MARK, PORT146_KEYIN4_MARK, IPORT2_MARK, + VIO_FIELD_MARK, PORT147_KEYIN5_MARK, + VIO_CKO_MARK, PORT148_KEYIN6_MARK, + A27_MARK, RDWR_XWE_MARK, MFG0_IN1_MARK, + MFG0_IN2_MARK, + TS_SPSYNC3_MARK, MSIOF2_RSCK_MARK, + TS_SDAT3_MARK, MSIOF2_RSYNC_MARK, + TPU1TO2_MARK, TS_SDEN3_MARK, PORT153_MSIOF2_SS1_MARK, + SOUT3_MARK, SCIFA2_TXD1_MARK, MSIOF2_MCK0_MARK, + SIN3_MARK, SCIFA2_RXD1_MARK, MSIOF2_MCK1_MARK, + XRTS3_MARK, SCIFA2_RTS1_MARK, PORT156_MSIOF2_SS2_MARK, + XCTS3_MARK, SCIFA2_CTS1_MARK, PORT157_MSIOF2_RXD_MARK, + + /* 55-4 */ + DINT_MARK, SCIFA2_SCK1_MARK, TS_SCK3_MARK, + PORT159_SCIFB_SCK_MARK, PORT159_SCIFA5_SCK_MARK, NMI_MARK, + PORT160_SCIFB_TXD_MARK, PORT160_SCIFA5_TXD_MARK, SOUT0_MARK, + PORT161_SCIFB_CTS_MARK, PORT161_SCIFA5_CTS_MARK, XCTS0_MARK, + MFG3_IN2_MARK, + PORT162_SCIFB_RXD_MARK, PORT162_SCIFA5_RXD_MARK, SIN0_MARK, + MFG3_IN1_MARK, + PORT163_SCIFB_RTS_MARK, PORT163_SCIFA5_RTS_MARK, XRTS0_MARK, + MFG3_OUT1_MARK, TPU3TO0_MARK, + LCDD0_MARK, PORT192_KEYOUT0_MARK, EXT_CKI_MARK, + LCDD1_MARK, PORT193_KEYOUT1_MARK, PORT193_SCIFA5_CTS_MARK, + BBIF2_TSYNC1_MARK, + LCDD2_MARK, PORT194_KEYOUT2_MARK, PORT194_SCIFA5_RTS_MARK, + BBIF2_TSCK1_MARK, + LCDD3_MARK, PORT195_KEYOUT3_MARK, PORT195_SCIFA5_RXD_MARK, + BBIF2_TXD1_MARK, + LCDD4_MARK, PORT196_KEYOUT4_MARK, PORT196_SCIFA5_TXD_MARK, + LCDD5_MARK, PORT197_KEYOUT5_MARK, PORT197_SCIFA5_SCK_MARK, + MFG2_OUT2_MARK, + TPU2TO1_MARK, + LCDD6_MARK, XWR2_MARK, + LCDD7_MARK, TPU4TO1_MARK, MFG4_OUT2_MARK, XWR3_MARK, + LCDD8_MARK, PORT200_KEYIN0_MARK, VIO_DR0_MARK, D16_MARK, ED16_MARK, + LCDD9_MARK, PORT201_KEYIN1_MARK, VIO_DR1_MARK, D17_MARK, ED17_MARK, + LCDD10_MARK, PORT202_KEYIN2_MARK, VIO_DR2_MARK, D18_MARK, ED18_MARK, + LCDD11_MARK, PORT203_KEYIN3_MARK, VIO_DR3_MARK, D19_MARK, ED19_MARK, + LCDD12_MARK, PORT204_KEYIN4_MARK, VIO_DR4_MARK, D20_MARK, ED20_MARK, + LCDD13_MARK, PORT205_KEYIN5_MARK, VIO_DR5_MARK, D21_MARK, ED21_MARK, + LCDD14_MARK, PORT206_KEYIN6_MARK, VIO_DR6_MARK, D22_MARK, ED22_MARK, + LCDD15_MARK, PORT207_MSIOF0L_SS1_MARK, PORT207_KEYOUT0_MARK, + VIO_DR7_MARK, D23_MARK, ED23_MARK, + LCDD16_MARK, PORT208_MSIOF0L_SS2_MARK, PORT208_KEYOUT1_MARK, + VIO_VDR_MARK, D24_MARK, ED24_MARK, + LCDD17_MARK, PORT209_KEYOUT2_MARK, VIO_HDR_MARK, D25_MARK, ED25_MARK, + LCDD18_MARK, DREQ2_MARK, PORT210_MSIOF0L_SS1_MARK, D26_MARK, ED26_MARK, + LCDD19_MARK, PORT211_MSIOF0L_SS2_MARK, D27_MARK, ED27_MARK, + LCDD20_MARK, TS_SPSYNC1_MARK, MSIOF0L_MCK0_MARK, D28_MARK, ED28_MARK, + LCDD21_MARK, TS_SDAT1_MARK, MSIOF0L_MCK1_MARK, D29_MARK, ED29_MARK, + LCDD22_MARK, TS_SDEN1_MARK, MSIOF0L_RSCK_MARK, D30_MARK, ED30_MARK, + LCDD23_MARK, TS_SCK1_MARK, MSIOF0L_RSYNC_MARK, D31_MARK, ED31_MARK, + LCDDCK_MARK, LCDWR_MARK, PORT216_KEYOUT3_MARK, VIO_CLKR_MARK, + LCDRD_MARK, DACK2_MARK, MSIOF0L_TSYNC_MARK, + LCDHSYN_MARK, LCDCS_MARK, LCDCS2_MARK, DACK3_MARK, + PORT218_VIO_CKOR_MARK, PORT218_KEYOUT4_MARK, + LCDDISP_MARK, LCDRS_MARK, DREQ3_MARK, MSIOF0L_TSCK_MARK, + LCDVSYN_MARK, LCDVSYN2_MARK, PORT220_KEYOUT5_MARK, + LCDLCLK_MARK, DREQ1_MARK, PWEN_MARK, MSIOF0L_RXD_MARK, + LCDDON_MARK, LCDDON2_MARK, DACK1_MARK, OVCN_MARK, MSIOF0L_TXD_MARK, + SCIFA1_TXD_MARK, OVCN2_MARK, + EXTLP_MARK, SCIFA1_SCK_MARK, USBTERM_MARK, PORT226_VIO_CKO2_MARK, + SCIFA1_RTS_MARK, IDIN_MARK, + SCIFA1_RXD_MARK, + SCIFA1_CTS_MARK, MFG1_IN1_MARK, + MSIOF1_TXD_MARK, SCIFA2_TXD2_MARK, PORT230_FSIAOMC_MARK, + MSIOF1_TSYNC_MARK, SCIFA2_CTS2_MARK, PORT231_FSIAOLR_MARK, + MSIOF1_TSCK_MARK, SCIFA2_SCK2_MARK, PORT232_FSIAOBT_MARK, + MSIOF1_RXD_MARK, SCIFA2_RXD2_MARK, GPS_VCOTRIG_MARK, + PORT233_FSIACK_MARK, + MSIOF1_RSCK_MARK, SCIFA2_RTS2_MARK, PORT234_FSIAOSLD_MARK, + MSIOF1_RSYNC_MARK, OPORT0_MARK, MFG1_IN2_MARK, PORT235_FSIAILR_MARK, + MSIOF1_MCK0_MARK, I2C_SDA2_MARK, PORT236_FSIAIBT_MARK, + MSIOF1_MCK1_MARK, I2C_SCL2_MARK, PORT237_FSIAISLD_MARK, + MSIOF1_SS1_MARK, EDBGREQ3_MARK, + + /* 55-5 */ + MSIOF1_SS2_MARK, + SCIFA6_TXD_MARK, + PORT241_IRDA_OUT_MARK, PORT241_IROUT_MARK, MFG4_OUT1_MARK, + TPU4TO0_MARK, + PORT242_IRDA_IN_MARK, MFG4_IN2_MARK, + PORT243_IRDA_FIRSEL_MARK, PORT243_VIO_CKO2_MARK, + PORT244_SCIFA5_CTS_MARK, MFG2_IN1_MARK, PORT244_SCIFB_CTS_MARK, + PORT244_MSIOF2_RXD_MARK, + PORT245_SCIFA5_RTS_MARK, MFG2_IN2_MARK, PORT245_SCIFB_RTS_MARK, + PORT245_MSIOF2_TXD_MARK, + PORT246_SCIFA5_RXD_MARK, MFG1_OUT1_MARK, PORT246_SCIFB_RXD_MARK, + TPU1TO0_MARK, + PORT247_SCIFA5_TXD_MARK, MFG3_OUT2_MARK, PORT247_SCIFB_TXD_MARK, + TPU3TO1_MARK, + PORT248_SCIFA5_SCK_MARK, MFG2_OUT1_MARK, PORT248_SCIFB_SCK_MARK, + TPU2TO0_MARK, + PORT248_MSIOF2_TSCK_MARK, + PORT249_IROUT_MARK, MFG4_IN1_MARK, PORT249_MSIOF2_TSYNC_MARK, + SDHICLK0_MARK, TCK2_SWCLK_MC0_MARK, + SDHICD0_MARK, + SDHID0_0_MARK, TMS2_SWDIO_MC0_MARK, + SDHID0_1_MARK, TDO2_SWO0_MC0_MARK, + SDHID0_2_MARK, TDI2_MARK, + SDHID0_3_MARK, RTCK2_SWO1_MC0_MARK, + SDHICMD0_MARK, TRST2_MARK, + SDHIWP0_MARK, EDBGREQ2_MARK, + SDHICLK1_MARK, TCK3_SWCLK_MC1_MARK, + SDHID1_0_MARK, M11_SLCD_SO2_MARK, TS_SPSYNC2_MARK, + TMS3_SWDIO_MC1_MARK, + SDHID1_1_MARK, M9_SLCD_A02_MARK, TS_SDAT2_MARK, TDO3_SWO0_MC1_MARK, + SDHID1_2_MARK, M10_SLCD_CK2_MARK, TS_SDEN2_MARK, TDI3_MARK, + SDHID1_3_MARK, M12_SLCD_CE2_MARK, TS_SCK2_MARK, RTCK3_SWO1_MC1_MARK, + SDHICMD1_MARK, TRST3_MARK, + RESETOUTS_MARK, + PINMUX_MARK_END, +}; + +#define PORT_DATA_I(nr) \ + PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_IN) + +#define PORT_DATA_I_PD(nr) \ + PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \ + PORT##nr##_IN, PORT##nr##_IN_PD) + +#define PORT_DATA_I_PU(nr) \ + PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \ + PORT##nr##_IN, PORT##nr##_IN_PU) + +#define PORT_DATA_I_PU_PD(nr) \ + PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \ + PORT##nr##_IN, PORT##nr##_IN_PD, \ + PORT##nr##_IN_PU) + +#define PORT_DATA_O(nr) \ + PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \ + PORT##nr##_OUT) + +#define PORT_DATA_IO(nr) \ + PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \ + PORT##nr##_OUT, PORT##nr##_IN) + +#define PORT_DATA_IO_PD(nr) \ + PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \ + PORT##nr##_OUT, PORT##nr##_IN, \ + PORT##nr##_IN_PD) + +#define PORT_DATA_IO_PU(nr) \ + PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \ + PORT##nr##_OUT, PORT##nr##_IN, \ + PORT##nr##_IN_PU) + +#define PORT_DATA_IO_PU_PD(nr) \ + PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \ + PORT##nr##_OUT, PORT##nr##_IN, \ + PORT##nr##_IN_PD, PORT##nr##_IN_PU) + +static pinmux_enum_t pinmux_data[] = { + /* specify valid pin states for each pin in GPIO mode */ + /* 55-1 (GPIO) */ + PORT_DATA_I_PD(0), PORT_DATA_I_PU(1), + PORT_DATA_I_PU(2), PORT_DATA_I_PU(3), + PORT_DATA_I_PU(4), PORT_DATA_I_PU(5), + PORT_DATA_I_PU(6), PORT_DATA_I_PU(7), + PORT_DATA_I_PU(8), PORT_DATA_I_PU(9), + PORT_DATA_I_PU(10), PORT_DATA_I_PU(11), + PORT_DATA_IO_PU(12), PORT_DATA_IO_PU(13), + PORT_DATA_IO_PU_PD(14), PORT_DATA_IO_PU_PD(15), + PORT_DATA_O(16), PORT_DATA_IO(17), + PORT_DATA_O(18), PORT_DATA_O(19), + PORT_DATA_O(20), PORT_DATA_O(21), + PORT_DATA_O(22), PORT_DATA_O(23), + PORT_DATA_O(24), PORT_DATA_I_PD(25), + PORT_DATA_I_PD(26), PORT_DATA_O(27), + PORT_DATA_O(28), PORT_DATA_O(29), + PORT_DATA_IO(30), PORT_DATA_IO_PU(31), + PORT_DATA_IO_PD(32), PORT_DATA_I_PU(33), + PORT_DATA_IO_PD(34), PORT_DATA_I_PU_PD(35), + PORT_DATA_O(36), PORT_DATA_IO(37), + + /* 55-2 (GPIO) */ + PORT_DATA_O(38), PORT_DATA_I_PU(39), + PORT_DATA_I_PU_PD(40), PORT_DATA_O(41), + PORT_DATA_IO_PD(42), PORT_DATA_IO_PD(43), + PORT_DATA_IO_PD(44), PORT_DATA_I_PD(45), + PORT_DATA_I_PD(46), PORT_DATA_I_PD(47), + PORT_DATA_I_PD(48), PORT_DATA_IO_PU_PD(49), + PORT_DATA_IO_PD(50), PORT_DATA_IO_PD(51), + PORT_DATA_O(52), PORT_DATA_IO_PU_PD(53), + PORT_DATA_IO_PU_PD(54), PORT_DATA_IO_PD(55), + PORT_DATA_I_PU_PD(56), PORT_DATA_IO(57), + PORT_DATA_IO(58), PORT_DATA_IO(59), + PORT_DATA_IO(60), PORT_DATA_IO(61), + PORT_DATA_IO_PD(62), PORT_DATA_IO_PD(63), + PORT_DATA_IO_PD(64), PORT_DATA_IO_PD(65), + PORT_DATA_IO_PU_PD(66), PORT_DATA_IO_PU_PD(67), + PORT_DATA_IO_PU_PD(68), PORT_DATA_IO_PU_PD(69), + PORT_DATA_IO_PU_PD(70), PORT_DATA_IO_PU_PD(71), + PORT_DATA_IO_PU_PD(72), PORT_DATA_I_PU_PD(73), + PORT_DATA_IO_PU(74), PORT_DATA_IO_PU(75), + PORT_DATA_IO_PU(76), PORT_DATA_IO_PU(77), + PORT_DATA_IO_PU(78), PORT_DATA_IO_PU(79), + PORT_DATA_IO_PU(80), PORT_DATA_IO_PU(81), + PORT_DATA_IO_PU(82), PORT_DATA_IO_PU(83), + PORT_DATA_IO_PU(84), PORT_DATA_IO_PU(85), + PORT_DATA_IO_PU(86), PORT_DATA_IO_PU(87), + PORT_DATA_IO_PU(88), PORT_DATA_IO_PU(89), + PORT_DATA_O(90), PORT_DATA_IO_PU(91), + PORT_DATA_O(92), + + /* 55-3 (GPIO) */ + PORT_DATA_IO_PU(93), + PORT_DATA_O(94), + PORT_DATA_I_PU_PD(95), + PORT_DATA_IO(96), PORT_DATA_IO(97), + PORT_DATA_IO(98), PORT_DATA_I_PU(99), + PORT_DATA_O(100), PORT_DATA_O(101), + PORT_DATA_I_PU(102), PORT_DATA_IO_PD(103), + PORT_DATA_I_PD(104), PORT_DATA_I_PD(105), + PORT_DATA_I_PD(106), PORT_DATA_I_PD(107), + PORT_DATA_I_PD(108), PORT_DATA_IO_PD(109), + PORT_DATA_IO_PD(110), PORT_DATA_I_PD(111), + PORT_DATA_IO_PD(112), PORT_DATA_IO_PD(113), + PORT_DATA_IO_PD(114), PORT_DATA_I_PD(115), + PORT_DATA_I_PD(116), PORT_DATA_IO_PD(117), + PORT_DATA_I_PD(118), PORT_DATA_IO_PD(128), + PORT_DATA_IO_PD(129), PORT_DATA_IO_PD(130), + PORT_DATA_IO_PD(131), PORT_DATA_IO_PD(132), + PORT_DATA_IO_PD(133), PORT_DATA_IO_PU_PD(134), + PORT_DATA_IO_PU_PD(135), PORT_DATA_IO_PU_PD(136), + PORT_DATA_IO_PU_PD(137), PORT_DATA_IO_PD(138), + PORT_DATA_IO_PD(139), PORT_DATA_IO_PD(140), + PORT_DATA_IO_PD(141), PORT_DATA_IO_PD(142), + PORT_DATA_IO_PD(143), PORT_DATA_IO_PU_PD(144), + PORT_DATA_IO_PD(145), PORT_DATA_IO_PU_PD(146), + PORT_DATA_IO_PU_PD(147), PORT_DATA_IO_PU_PD(148), + PORT_DATA_IO_PU_PD(149), PORT_DATA_I_PD(150), + PORT_DATA_IO_PU_PD(151), PORT_DATA_IO_PD(152), + PORT_DATA_IO_PD(153), PORT_DATA_IO_PD(154), + PORT_DATA_I_PD(155), PORT_DATA_IO_PU_PD(156), + PORT_DATA_I_PD(157), PORT_DATA_IO_PD(158), + + /* 55-4 (GPIO) */ + PORT_DATA_IO_PU_PD(159), PORT_DATA_IO_PU_PD(160), + PORT_DATA_I_PU_PD(161), PORT_DATA_I_PU_PD(162), + PORT_DATA_IO_PU_PD(163), PORT_DATA_I_PU_PD(164), + PORT_DATA_IO_PD(192), PORT_DATA_IO_PD(193), + PORT_DATA_IO_PD(194), PORT_DATA_IO_PD(195), + PORT_DATA_IO_PD(196), PORT_DATA_IO_PD(197), + PORT_DATA_IO_PD(198), PORT_DATA_IO_PD(199), + PORT_DATA_IO_PU_PD(200), PORT_DATA_IO_PU_PD(201), + PORT_DATA_IO_PU_PD(202), PORT_DATA_IO_PU_PD(203), + PORT_DATA_IO_PU_PD(204), PORT_DATA_IO_PU_PD(205), + PORT_DATA_IO_PU_PD(206), PORT_DATA_IO_PD(207), + PORT_DATA_IO_PD(208), PORT_DATA_IO_PD(209), + PORT_DATA_IO_PD(210), PORT_DATA_IO_PD(211), + PORT_DATA_IO_PD(212), PORT_DATA_IO_PD(213), + PORT_DATA_IO_PD(214), PORT_DATA_IO_PD(215), + PORT_DATA_IO_PD(216), PORT_DATA_IO_PD(217), + PORT_DATA_O(218), PORT_DATA_IO_PD(219), + PORT_DATA_IO_PD(220), PORT_DATA_IO_PD(221), + PORT_DATA_IO_PU_PD(222), + PORT_DATA_I_PU_PD(223), PORT_DATA_I_PU_PD(224), + PORT_DATA_IO_PU_PD(225), PORT_DATA_O(226), + PORT_DATA_IO_PU_PD(227), PORT_DATA_I_PD(228), + PORT_DATA_I_PD(229), PORT_DATA_IO(230), + PORT_DATA_IO_PD(231), PORT_DATA_IO_PU_PD(232), + PORT_DATA_I_PD(233), PORT_DATA_IO_PU_PD(234), + PORT_DATA_IO_PU_PD(235), PORT_DATA_IO_PU_PD(236), + PORT_DATA_IO_PD(237), PORT_DATA_IO_PU_PD(238), + + /* 55-5 (GPIO) */ + PORT_DATA_IO_PU_PD(239), PORT_DATA_IO_PU_PD(240), + PORT_DATA_O(241), PORT_DATA_I_PD(242), + PORT_DATA_IO_PU_PD(243), PORT_DATA_IO_PU_PD(244), + PORT_DATA_IO_PU_PD(245), PORT_DATA_IO_PU_PD(246), + PORT_DATA_IO_PU_PD(247), PORT_DATA_IO_PU_PD(248), + PORT_DATA_IO_PU_PD(249), PORT_DATA_IO_PD(250), + PORT_DATA_IO_PU_PD(251), PORT_DATA_IO_PU_PD(252), + PORT_DATA_IO_PU_PD(253), PORT_DATA_IO_PU_PD(254), + PORT_DATA_IO_PU_PD(255), PORT_DATA_IO_PU_PD(256), + PORT_DATA_IO_PU_PD(257), PORT_DATA_IO_PD(258), + PORT_DATA_IO_PU_PD(259), PORT_DATA_IO_PU_PD(260), + PORT_DATA_IO_PU_PD(261), PORT_DATA_IO_PU_PD(262), + PORT_DATA_IO_PU_PD(263), + + /* Special Pull-up / Pull-down Functions */ + PINMUX_DATA(PORT66_KEYIN0_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0, + PORT66_FN2, PORT66_IN_PU), + PINMUX_DATA(PORT67_KEYIN1_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0, + PORT67_FN2, PORT67_IN_PU), + PINMUX_DATA(PORT68_KEYIN2_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0, + PORT68_FN2, PORT68_IN_PU), + PINMUX_DATA(PORT69_KEYIN3_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0, + PORT69_FN2, PORT69_IN_PU), + PINMUX_DATA(PORT70_KEYIN4_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0, + PORT70_FN2, PORT70_IN_PU), + PINMUX_DATA(PORT71_KEYIN5_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0, + PORT71_FN2, PORT71_IN_PU), + PINMUX_DATA(PORT72_KEYIN6_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0, + PORT72_FN2, PORT72_IN_PU), + + + /* 55-1 (FN) */ + PINMUX_DATA(VBUS_0_MARK, PORT0_FN1), + PINMUX_DATA(CPORT0_MARK, PORT1_FN1), + PINMUX_DATA(CPORT1_MARK, PORT2_FN1), + PINMUX_DATA(CPORT2_MARK, PORT3_FN1), + PINMUX_DATA(CPORT3_MARK, PORT4_FN1), + PINMUX_DATA(CPORT4_MARK, PORT5_FN1), + PINMUX_DATA(CPORT5_MARK, PORT6_FN1), + PINMUX_DATA(CPORT6_MARK, PORT7_FN1), + PINMUX_DATA(CPORT7_MARK, PORT8_FN1), + PINMUX_DATA(CPORT8_MARK, PORT9_FN1), + PINMUX_DATA(CPORT9_MARK, PORT10_FN1), + PINMUX_DATA(CPORT10_MARK, PORT11_FN1), + PINMUX_DATA(CPORT11_MARK, PORT12_FN1), + PINMUX_DATA(SIN2_MARK, PORT12_FN2), + PINMUX_DATA(CPORT12_MARK, PORT13_FN1), + PINMUX_DATA(XCTS2_MARK, PORT13_FN2), + PINMUX_DATA(CPORT13_MARK, PORT14_FN1), + PINMUX_DATA(RFSPO4_MARK, PORT14_FN2), + PINMUX_DATA(CPORT14_MARK, PORT15_FN1), + PINMUX_DATA(RFSPO5_MARK, PORT15_FN2), + PINMUX_DATA(CPORT15_MARK, PORT16_FN1), + PINMUX_DATA(SCIFA0_SCK_MARK, PORT16_FN2), + PINMUX_DATA(GPS_AGC2_MARK, PORT16_FN3), + PINMUX_DATA(CPORT16_MARK, PORT17_FN1), + PINMUX_DATA(SCIFA0_TXD_MARK, PORT17_FN2), + PINMUX_DATA(GPS_AGC3_MARK, PORT17_FN3), + PINMUX_DATA(CPORT17_IC_OE_MARK, PORT18_FN1), + PINMUX_DATA(SOUT2_MARK, PORT18_FN2), + PINMUX_DATA(CPORT18_MARK, PORT19_FN1), + PINMUX_DATA(XRTS2_MARK, PORT19_FN2), + PINMUX_DATA(PORT19_VIO_CKO2_MARK, PORT19_FN3), + PINMUX_DATA(CPORT19_MPORT1_MARK, PORT20_FN1), + PINMUX_DATA(CPORT20_MARK, PORT21_FN1), + PINMUX_DATA(RFSPO6_MARK, PORT21_FN2), + PINMUX_DATA(CPORT21_MARK, PORT22_FN1), + PINMUX_DATA(STATUS0_MARK, PORT22_FN2), + PINMUX_DATA(CPORT22_MARK, PORT23_FN1), + PINMUX_DATA(STATUS1_MARK, PORT23_FN2), + PINMUX_DATA(CPORT23_MARK, PORT24_FN1), + PINMUX_DATA(STATUS2_MARK, PORT24_FN2), + PINMUX_DATA(RFSPO7_MARK, PORT24_FN3), + PINMUX_DATA(B_SYNLD1_MARK, PORT25_FN1), + PINMUX_DATA(B_SYNLD2_MARK, PORT26_FN1), + PINMUX_DATA(SYSENMSK_MARK, PORT26_FN2), + PINMUX_DATA(XMAINPS_MARK, PORT27_FN1), + PINMUX_DATA(XDIVPS_MARK, PORT28_FN1), + PINMUX_DATA(XIDRST_MARK, PORT29_FN1), + PINMUX_DATA(IDCLK_MARK, PORT30_FN1), + PINMUX_DATA(IC_DP_MARK, PORT30_FN2), + PINMUX_DATA(IDIO_MARK, PORT31_FN1), + PINMUX_DATA(IC_DM_MARK, PORT31_FN2), + PINMUX_DATA(SOUT1_MARK, PORT32_FN1), + PINMUX_DATA(SCIFA4_TXD_MARK, PORT32_FN2), + PINMUX_DATA(M02_BERDAT_MARK, PORT32_FN3), + PINMUX_DATA(SIN1_MARK, PORT33_FN1), + PINMUX_DATA(SCIFA4_RXD_MARK, PORT33_FN2), + PINMUX_DATA(XWUP_MARK, PORT33_FN3), + PINMUX_DATA(XRTS1_MARK, PORT34_FN1), + PINMUX_DATA(SCIFA4_RTS_MARK, PORT34_FN2), + PINMUX_DATA(M03_BERCLK_MARK, PORT34_FN3), + PINMUX_DATA(XCTS1_MARK, PORT35_FN1), + PINMUX_DATA(SCIFA4_CTS_MARK, PORT35_FN2), + PINMUX_DATA(PCMCLKO_MARK, PORT36_FN1), + PINMUX_DATA(SYNC8KO_MARK, PORT37_FN1), + + /* 55-2 (FN) */ + PINMUX_DATA(DNPCM_A_MARK, PORT38_FN1), + PINMUX_DATA(UPPCM_A_MARK, PORT39_FN1), + PINMUX_DATA(VACK_MARK, PORT40_FN1), + PINMUX_DATA(XTALB1L_MARK, PORT41_FN1), + PINMUX_DATA(GPS_AGC1_MARK, PORT42_FN1), + PINMUX_DATA(SCIFA0_RTS_MARK, PORT42_FN2), + PINMUX_DATA(GPS_AGC4_MARK, PORT43_FN1), + PINMUX_DATA(SCIFA0_RXD_MARK, PORT43_FN2), + PINMUX_DATA(GPS_PWRDOWN_MARK, PORT44_FN1), + PINMUX_DATA(SCIFA0_CTS_MARK, PORT44_FN2), + PINMUX_DATA(GPS_IM_MARK, PORT45_FN1), + PINMUX_DATA(GPS_IS_MARK, PORT46_FN1), + PINMUX_DATA(GPS_QM_MARK, PORT47_FN1), + PINMUX_DATA(GPS_QS_MARK, PORT48_FN1), + PINMUX_DATA(FMSOCK_MARK, PORT49_FN1), + PINMUX_DATA(PORT49_IRDA_OUT_MARK, PORT49_FN2), + PINMUX_DATA(PORT49_IROUT_MARK, PORT49_FN3), + PINMUX_DATA(FMSOOLR_MARK, PORT50_FN1), + PINMUX_DATA(BBIF2_TSYNC2_MARK, PORT50_FN2), + PINMUX_DATA(TPU2TO2_MARK, PORT50_FN3), + PINMUX_DATA(IPORT3_MARK, PORT50_FN4), + PINMUX_DATA(FMSIOLR_MARK, PORT50_FN5), + PINMUX_DATA(FMSOOBT_MARK, PORT51_FN1), + PINMUX_DATA(BBIF2_TSCK2_MARK, PORT51_FN2), + PINMUX_DATA(TPU2TO3_MARK, PORT51_FN3), + PINMUX_DATA(OPORT1_MARK, PORT51_FN4), + PINMUX_DATA(FMSIOBT_MARK, PORT51_FN5), + PINMUX_DATA(FMSOSLD_MARK, PORT52_FN1), + PINMUX_DATA(BBIF2_TXD2_MARK, PORT52_FN2), + PINMUX_DATA(OPORT2_MARK, PORT52_FN3), + PINMUX_DATA(FMSOILR_MARK, PORT53_FN1), + PINMUX_DATA(PORT53_IRDA_IN_MARK, PORT53_FN2), + PINMUX_DATA(TPU3TO3_MARK, PORT53_FN3), + PINMUX_DATA(OPORT3_MARK, PORT53_FN4), + PINMUX_DATA(FMSIILR_MARK, PORT53_FN5), + PINMUX_DATA(FMSOIBT_MARK, PORT54_FN1), + PINMUX_DATA(PORT54_IRDA_FIRSEL_MARK, PORT54_FN2), + PINMUX_DATA(TPU3TO2_MARK, PORT54_FN3), + PINMUX_DATA(FMSIIBT_MARK, PORT54_FN4), + PINMUX_DATA(FMSISLD_MARK, PORT55_FN1), + PINMUX_DATA(MFG0_OUT1_MARK, PORT55_FN2), + PINMUX_DATA(TPU0TO0_MARK, PORT55_FN3), + PINMUX_DATA(A0_EA0_MARK, PORT57_FN1), + PINMUX_DATA(BS_MARK, PORT57_FN2), + PINMUX_DATA(A12_EA12_MARK, PORT58_FN1), + PINMUX_DATA(PORT58_VIO_CKOR_MARK, PORT58_FN2), + PINMUX_DATA(TPU4TO2_MARK, PORT58_FN3), + PINMUX_DATA(A13_EA13_MARK, PORT59_FN1), + PINMUX_DATA(PORT59_IROUT_MARK, PORT59_FN2), + PINMUX_DATA(MFG0_OUT2_MARK, PORT59_FN3), + PINMUX_DATA(TPU0TO1_MARK, PORT59_FN4), + PINMUX_DATA(A14_EA14_MARK, PORT60_FN1), + PINMUX_DATA(PORT60_KEYOUT5_MARK, PORT60_FN2), + PINMUX_DATA(A15_EA15_MARK, PORT61_FN1), + PINMUX_DATA(PORT61_KEYOUT4_MARK, PORT61_FN2), + PINMUX_DATA(A16_EA16_MARK, PORT62_FN1), + PINMUX_DATA(PORT62_KEYOUT3_MARK, PORT62_FN2), + PINMUX_DATA(MSIOF0_SS1_MARK, PORT62_FN3), + PINMUX_DATA(A17_EA17_MARK, PORT63_FN1), + PINMUX_DATA(PORT63_KEYOUT2_MARK, PORT63_FN2), + PINMUX_DATA(MSIOF0_TSYNC_MARK, PORT63_FN3), + PINMUX_DATA(A18_EA18_MARK, PORT64_FN1), + PINMUX_DATA(PORT64_KEYOUT1_MARK, PORT64_FN2), + PINMUX_DATA(MSIOF0_TSCK_MARK, PORT64_FN3), + PINMUX_DATA(A19_EA19_MARK, PORT65_FN1), + PINMUX_DATA(PORT65_KEYOUT0_MARK, PORT65_FN2), + PINMUX_DATA(MSIOF0_TXD_MARK, PORT65_FN3), + PINMUX_DATA(A20_EA20_MARK, PORT66_FN1), + PINMUX_DATA(PORT66_KEYIN0_MARK, PORT66_FN2), + PINMUX_DATA(MSIOF0_RSCK_MARK, PORT66_FN3), + PINMUX_DATA(A21_EA21_MARK, PORT67_FN1), + PINMUX_DATA(PORT67_KEYIN1_MARK, PORT67_FN2), + PINMUX_DATA(MSIOF0_RSYNC_MARK, PORT67_FN3), + PINMUX_DATA(A22_EA22_MARK, PORT68_FN1), + PINMUX_DATA(PORT68_KEYIN2_MARK, PORT68_FN2), + PINMUX_DATA(MSIOF0_MCK0_MARK, PORT68_FN3), + PINMUX_DATA(A23_EA23_MARK, PORT69_FN1), + PINMUX_DATA(PORT69_KEYIN3_MARK, PORT69_FN2), + PINMUX_DATA(MSIOF0_MCK1_MARK, PORT69_FN3), + PINMUX_DATA(A24_EA24_MARK, PORT70_FN1), + PINMUX_DATA(PORT70_KEYIN4_MARK, PORT70_FN2), + PINMUX_DATA(MSIOF0_RXD_MARK, PORT70_FN3), + PINMUX_DATA(A25_EA25_MARK, PORT71_FN1), + PINMUX_DATA(PORT71_KEYIN5_MARK, PORT71_FN2), + PINMUX_DATA(MSIOF0_SS2_MARK, PORT71_FN3), + PINMUX_DATA(A26_MARK, PORT72_FN1), + PINMUX_DATA(PORT72_KEYIN6_MARK, PORT72_FN2), + PINMUX_DATA(D0_ED0_NAF0_MARK, PORT74_FN1), + PINMUX_DATA(D1_ED1_NAF1_MARK, PORT75_FN1), + PINMUX_DATA(D2_ED2_NAF2_MARK, PORT76_FN1), + PINMUX_DATA(D3_ED3_NAF3_MARK, PORT77_FN1), + PINMUX_DATA(D4_ED4_NAF4_MARK, PORT78_FN1), + PINMUX_DATA(D5_ED5_NAF5_MARK, PORT79_FN1), + PINMUX_DATA(D6_ED6_NAF6_MARK, PORT80_FN1), + PINMUX_DATA(D7_ED7_NAF7_MARK, PORT81_FN1), + PINMUX_DATA(D8_ED8_NAF8_MARK, PORT82_FN1), + PINMUX_DATA(D9_ED9_NAF9_MARK, PORT83_FN1), + PINMUX_DATA(D10_ED10_NAF10_MARK, PORT84_FN1), + PINMUX_DATA(D11_ED11_NAF11_MARK, PORT85_FN1), + PINMUX_DATA(D12_ED12_NAF12_MARK, PORT86_FN1), + PINMUX_DATA(D13_ED13_NAF13_MARK, PORT87_FN1), + PINMUX_DATA(D14_ED14_NAF14_MARK, PORT88_FN1), + PINMUX_DATA(D15_ED15_NAF15_MARK, PORT89_FN1), + PINMUX_DATA(CS4_MARK, PORT90_FN1), + PINMUX_DATA(CS5A_MARK, PORT91_FN1), + PINMUX_DATA(FMSICK_MARK, PORT91_FN2), + PINMUX_DATA(CS5B_MARK, PORT92_FN1), + PINMUX_DATA(FCE1_MARK, PORT92_FN2), + + /* 55-3 (FN) */ + PINMUX_DATA(CS6B_MARK, PORT93_FN1), + PINMUX_DATA(XCS2_MARK, PORT93_FN2), + PINMUX_DATA(CS6A_MARK, PORT93_FN3), + PINMUX_DATA(DACK0_MARK, PORT93_FN4), + PINMUX_DATA(FCE0_MARK, PORT94_FN1), + PINMUX_DATA(WAIT_MARK, PORT95_FN1), + PINMUX_DATA(DREQ0_MARK, PORT95_FN2), + PINMUX_DATA(RD_XRD_MARK, PORT96_FN1), + PINMUX_DATA(WE0_XWR0_FWE_MARK, PORT97_FN1), + PINMUX_DATA(WE1_XWR1_MARK, PORT98_FN1), + PINMUX_DATA(FRB_MARK, PORT99_FN1), + PINMUX_DATA(CKO_MARK, PORT100_FN1), + PINMUX_DATA(NBRSTOUT_MARK, PORT101_FN1), + PINMUX_DATA(NBRST_MARK, PORT102_FN1), + PINMUX_DATA(GPS_EPPSIN_MARK, PORT106_FN1), + PINMUX_DATA(LATCHPULSE_MARK, PORT110_FN1), + PINMUX_DATA(LTESIGNAL_MARK, PORT111_FN1), + PINMUX_DATA(LEGACYSTATE_MARK, PORT112_FN1), + PINMUX_DATA(TCKON_MARK, PORT118_FN1), + PINMUX_DATA(VIO_VD_MARK, PORT128_FN1), + PINMUX_DATA(PORT128_KEYOUT0_MARK, PORT128_FN2), + PINMUX_DATA(IPORT0_MARK, PORT128_FN3), + PINMUX_DATA(VIO_HD_MARK, PORT129_FN1), + PINMUX_DATA(PORT129_KEYOUT1_MARK, PORT129_FN2), + PINMUX_DATA(IPORT1_MARK, PORT129_FN3), + PINMUX_DATA(VIO_D0_MARK, PORT130_FN1), + PINMUX_DATA(PORT130_KEYOUT2_MARK, PORT130_FN2), + PINMUX_DATA(PORT130_MSIOF2_RXD_MARK, PORT130_FN3), + PINMUX_DATA(VIO_D1_MARK, PORT131_FN1), + PINMUX_DATA(PORT131_KEYOUT3_MARK, PORT131_FN2), + PINMUX_DATA(PORT131_MSIOF2_SS1_MARK, PORT131_FN3), + PINMUX_DATA(VIO_D2_MARK, PORT132_FN1), + PINMUX_DATA(PORT132_KEYOUT4_MARK, PORT132_FN2), + PINMUX_DATA(PORT132_MSIOF2_SS2_MARK, PORT132_FN3), + PINMUX_DATA(VIO_D3_MARK, PORT133_FN1), + PINMUX_DATA(PORT133_KEYOUT5_MARK, PORT133_FN2), + PINMUX_DATA(PORT133_MSIOF2_TSYNC_MARK, PORT133_FN3), + PINMUX_DATA(VIO_D4_MARK, PORT134_FN1), + PINMUX_DATA(PORT134_KEYIN0_MARK, PORT134_FN2), + PINMUX_DATA(PORT134_MSIOF2_TXD_MARK, PORT134_FN3), + PINMUX_DATA(VIO_D5_MARK, PORT135_FN1), + PINMUX_DATA(PORT135_KEYIN1_MARK, PORT135_FN2), + PINMUX_DATA(PORT135_MSIOF2_TSCK_MARK, PORT135_FN3), + PINMUX_DATA(VIO_D6_MARK, PORT136_FN1), + PINMUX_DATA(PORT136_KEYIN2_MARK, PORT136_FN2), + PINMUX_DATA(VIO_D7_MARK, PORT137_FN1), + PINMUX_DATA(PORT137_KEYIN3_MARK, PORT137_FN2), + PINMUX_DATA(VIO_D8_MARK, PORT138_FN1), + PINMUX_DATA(M9_SLCD_A01_MARK, PORT138_FN2), + PINMUX_DATA(PORT138_FSIAOMC_MARK, PORT138_FN3), + PINMUX_DATA(VIO_D9_MARK, PORT139_FN1), + PINMUX_DATA(M10_SLCD_CK1_MARK, PORT139_FN2), + PINMUX_DATA(PORT139_FSIAOLR_MARK, PORT139_FN3), + PINMUX_DATA(VIO_D10_MARK, PORT140_FN1), + PINMUX_DATA(M11_SLCD_SO1_MARK, PORT140_FN2), + PINMUX_DATA(TPU0TO2_MARK, PORT140_FN3), + PINMUX_DATA(PORT140_FSIAOBT_MARK, PORT140_FN4), + PINMUX_DATA(VIO_D11_MARK, PORT141_FN1), + PINMUX_DATA(M12_SLCD_CE1_MARK, PORT141_FN2), + PINMUX_DATA(TPU0TO3_MARK, PORT141_FN3), + PINMUX_DATA(PORT141_FSIAOSLD_MARK, PORT141_FN4), + PINMUX_DATA(VIO_D12_MARK, PORT142_FN1), + PINMUX_DATA(M13_BSW_MARK, PORT142_FN2), + PINMUX_DATA(PORT142_FSIACK_MARK, PORT142_FN3), + PINMUX_DATA(VIO_D13_MARK, PORT143_FN1), + PINMUX_DATA(M14_GSW_MARK, PORT143_FN2), + PINMUX_DATA(PORT143_FSIAILR_MARK, PORT143_FN3), + PINMUX_DATA(VIO_D14_MARK, PORT144_FN1), + PINMUX_DATA(M15_RSW_MARK, PORT144_FN2), + PINMUX_DATA(PORT144_FSIAIBT_MARK, PORT144_FN3), + PINMUX_DATA(VIO_D15_MARK, PORT145_FN1), + PINMUX_DATA(TPU1TO3_MARK, PORT145_FN2), + PINMUX_DATA(PORT145_FSIAISLD_MARK, PORT145_FN3), + PINMUX_DATA(VIO_CLK_MARK, PORT146_FN1), + PINMUX_DATA(PORT146_KEYIN4_MARK, PORT146_FN2), + PINMUX_DATA(IPORT2_MARK, PORT146_FN3), + PINMUX_DATA(VIO_FIELD_MARK, PORT147_FN1), + PINMUX_DATA(PORT147_KEYIN5_MARK, PORT147_FN2), + PINMUX_DATA(VIO_CKO_MARK, PORT148_FN1), + PINMUX_DATA(PORT148_KEYIN6_MARK, PORT148_FN2), + PINMUX_DATA(A27_MARK, PORT149_FN1), + PINMUX_DATA(RDWR_XWE_MARK, PORT149_FN2), + PINMUX_DATA(MFG0_IN1_MARK, PORT149_FN3), + PINMUX_DATA(MFG0_IN2_MARK, PORT150_FN1), + PINMUX_DATA(TS_SPSYNC3_MARK, PORT151_FN1), + PINMUX_DATA(MSIOF2_RSCK_MARK, PORT151_FN2), + PINMUX_DATA(TS_SDAT3_MARK, PORT152_FN1), + PINMUX_DATA(MSIOF2_RSYNC_MARK, PORT152_FN2), + PINMUX_DATA(TPU1TO2_MARK, PORT153_FN1), + PINMUX_DATA(TS_SDEN3_MARK, PORT153_FN2), + PINMUX_DATA(PORT153_MSIOF2_SS1_MARK, PORT153_FN3), + PINMUX_DATA(SOUT3_MARK, PORT154_FN1), + PINMUX_DATA(SCIFA2_TXD1_MARK, PORT154_FN2), + PINMUX_DATA(MSIOF2_MCK0_MARK, PORT154_FN3), + PINMUX_DATA(SIN3_MARK, PORT155_FN1), + PINMUX_DATA(SCIFA2_RXD1_MARK, PORT155_FN2), + PINMUX_DATA(MSIOF2_MCK1_MARK, PORT155_FN3), + PINMUX_DATA(XRTS3_MARK, PORT156_FN1), + PINMUX_DATA(SCIFA2_RTS1_MARK, PORT156_FN2), + PINMUX_DATA(PORT156_MSIOF2_SS2_MARK, PORT156_FN3), + PINMUX_DATA(XCTS3_MARK, PORT157_FN1), + PINMUX_DATA(SCIFA2_CTS1_MARK, PORT157_FN2), + PINMUX_DATA(PORT157_MSIOF2_RXD_MARK, PORT157_FN3), + + /* 55-4 (FN) */ + PINMUX_DATA(DINT_MARK, PORT158_FN1), + PINMUX_DATA(SCIFA2_SCK1_MARK, PORT158_FN2), + PINMUX_DATA(TS_SCK3_MARK, PORT158_FN3), + PINMUX_DATA(PORT159_SCIFB_SCK_MARK, PORT159_FN1), + PINMUX_DATA(PORT159_SCIFA5_SCK_MARK, PORT159_FN2), + PINMUX_DATA(NMI_MARK, PORT159_FN3), + PINMUX_DATA(PORT160_SCIFB_TXD_MARK, PORT160_FN1), + PINMUX_DATA(PORT160_SCIFA5_TXD_MARK, PORT160_FN2), + PINMUX_DATA(SOUT0_MARK, PORT160_FN3), + PINMUX_DATA(PORT161_SCIFB_CTS_MARK, PORT161_FN1), + PINMUX_DATA(PORT161_SCIFA5_CTS_MARK, PORT161_FN2), + PINMUX_DATA(XCTS0_MARK, PORT161_FN3), + PINMUX_DATA(MFG3_IN2_MARK, PORT161_FN4), + PINMUX_DATA(PORT162_SCIFB_RXD_MARK, PORT162_FN1), + PINMUX_DATA(PORT162_SCIFA5_RXD_MARK, PORT162_FN2), + PINMUX_DATA(SIN0_MARK, PORT162_FN3), + PINMUX_DATA(MFG3_IN1_MARK, PORT162_FN4), + PINMUX_DATA(PORT163_SCIFB_RTS_MARK, PORT163_FN1), + PINMUX_DATA(PORT163_SCIFA5_RTS_MARK, PORT163_FN2), + PINMUX_DATA(XRTS0_MARK, PORT163_FN3), + PINMUX_DATA(MFG3_OUT1_MARK, PORT163_FN4), + PINMUX_DATA(TPU3TO0_MARK, PORT163_FN5), + PINMUX_DATA(LCDD0_MARK, PORT192_FN1), + PINMUX_DATA(PORT192_KEYOUT0_MARK, PORT192_FN2), + PINMUX_DATA(EXT_CKI_MARK, PORT192_FN3), + PINMUX_DATA(LCDD1_MARK, PORT193_FN1), + PINMUX_DATA(PORT193_KEYOUT1_MARK, PORT193_FN2), + PINMUX_DATA(PORT193_SCIFA5_CTS_MARK, PORT193_FN3), + PINMUX_DATA(BBIF2_TSYNC1_MARK, PORT193_FN4), + PINMUX_DATA(LCDD2_MARK, PORT194_FN1), + PINMUX_DATA(PORT194_KEYOUT2_MARK, PORT194_FN2), + PINMUX_DATA(PORT194_SCIFA5_RTS_MARK, PORT194_FN3), + PINMUX_DATA(BBIF2_TSCK1_MARK, PORT194_FN4), + PINMUX_DATA(LCDD3_MARK, PORT195_FN1), + PINMUX_DATA(PORT195_KEYOUT3_MARK, PORT195_FN2), + PINMUX_DATA(PORT195_SCIFA5_RXD_MARK, PORT195_FN3), + PINMUX_DATA(BBIF2_TXD1_MARK, PORT195_FN4), + PINMUX_DATA(LCDD4_MARK, PORT196_FN1), + PINMUX_DATA(PORT196_KEYOUT4_MARK, PORT196_FN2), + PINMUX_DATA(PORT196_SCIFA5_TXD_MARK, PORT196_FN3), + PINMUX_DATA(LCDD5_MARK, PORT197_FN1), + PINMUX_DATA(PORT197_KEYOUT5_MARK, PORT197_FN2), + PINMUX_DATA(PORT197_SCIFA5_SCK_MARK, PORT197_FN3), + PINMUX_DATA(MFG2_OUT2_MARK, PORT197_FN4), + PINMUX_DATA(LCDD6_MARK, PORT198_FN1), + PINMUX_DATA(LCDD7_MARK, PORT199_FN1), + PINMUX_DATA(TPU4TO1_MARK, PORT199_FN2), + PINMUX_DATA(MFG4_OUT2_MARK, PORT199_FN3), + PINMUX_DATA(LCDD8_MARK, PORT200_FN1), + PINMUX_DATA(PORT200_KEYIN0_MARK, PORT200_FN2), + PINMUX_DATA(VIO_DR0_MARK, PORT200_FN3), + PINMUX_DATA(D16_MARK, PORT200_FN4), + PINMUX_DATA(LCDD9_MARK, PORT201_FN1), + PINMUX_DATA(PORT201_KEYIN1_MARK, PORT201_FN2), + PINMUX_DATA(VIO_DR1_MARK, PORT201_FN3), + PINMUX_DATA(D17_MARK, PORT201_FN4), + PINMUX_DATA(LCDD10_MARK, PORT202_FN1), + PINMUX_DATA(PORT202_KEYIN2_MARK, PORT202_FN2), + PINMUX_DATA(VIO_DR2_MARK, PORT202_FN3), + PINMUX_DATA(D18_MARK, PORT202_FN4), + PINMUX_DATA(LCDD11_MARK, PORT203_FN1), + PINMUX_DATA(PORT203_KEYIN3_MARK, PORT203_FN2), + PINMUX_DATA(VIO_DR3_MARK, PORT203_FN3), + PINMUX_DATA(D19_MARK, PORT203_FN4), + PINMUX_DATA(LCDD12_MARK, PORT204_FN1), + PINMUX_DATA(PORT204_KEYIN4_MARK, PORT204_FN2), + PINMUX_DATA(VIO_DR4_MARK, PORT204_FN3), + PINMUX_DATA(D20_MARK, PORT204_FN4), + PINMUX_DATA(LCDD13_MARK, PORT205_FN1), + PINMUX_DATA(PORT205_KEYIN5_MARK, PORT205_FN2), + PINMUX_DATA(VIO_DR5_MARK, PORT205_FN3), + PINMUX_DATA(D21_MARK, PORT205_FN4), + PINMUX_DATA(LCDD14_MARK, PORT206_FN1), + PINMUX_DATA(PORT206_KEYIN6_MARK, PORT206_FN2), + PINMUX_DATA(VIO_DR6_MARK, PORT206_FN3), + PINMUX_DATA(D22_MARK, PORT206_FN4), + PINMUX_DATA(LCDD15_MARK, PORT207_FN1), + PINMUX_DATA(PORT207_MSIOF0L_SS1_MARK, PORT207_FN2), + PINMUX_DATA(PORT207_KEYOUT0_MARK, PORT207_FN3), + PINMUX_DATA(VIO_DR7_MARK, PORT207_FN4), + PINMUX_DATA(D23_MARK, PORT207_FN5), + PINMUX_DATA(LCDD16_MARK, PORT208_FN1), + PINMUX_DATA(PORT208_MSIOF0L_SS2_MARK, PORT208_FN2), + PINMUX_DATA(PORT208_KEYOUT1_MARK, PORT208_FN3), + PINMUX_DATA(VIO_VDR_MARK, PORT208_FN4), + PINMUX_DATA(D24_MARK, PORT208_FN5), + PINMUX_DATA(LCDD17_MARK, PORT209_FN1), + PINMUX_DATA(PORT209_KEYOUT2_MARK, PORT209_FN2), + PINMUX_DATA(VIO_HDR_MARK, PORT209_FN3), + PINMUX_DATA(D25_MARK, PORT209_FN4), + PINMUX_DATA(LCDD18_MARK, PORT210_FN1), + PINMUX_DATA(DREQ2_MARK, PORT210_FN2), + PINMUX_DATA(PORT210_MSIOF0L_SS1_MARK, PORT210_FN3), + PINMUX_DATA(D26_MARK, PORT210_FN4), + PINMUX_DATA(LCDD19_MARK, PORT211_FN1), + PINMUX_DATA(PORT211_MSIOF0L_SS2_MARK, PORT211_FN2), + PINMUX_DATA(D27_MARK, PORT211_FN3), + PINMUX_DATA(LCDD20_MARK, PORT212_FN1), + PINMUX_DATA(TS_SPSYNC1_MARK, PORT212_FN2), + PINMUX_DATA(MSIOF0L_MCK0_MARK, PORT212_FN3), + PINMUX_DATA(D28_MARK, PORT212_FN4), + PINMUX_DATA(LCDD21_MARK, PORT213_FN1), + PINMUX_DATA(TS_SDAT1_MARK, PORT213_FN2), + PINMUX_DATA(MSIOF0L_MCK1_MARK, PORT213_FN3), + PINMUX_DATA(D29_MARK, PORT213_FN4), + PINMUX_DATA(LCDD22_MARK, PORT214_FN1), + PINMUX_DATA(TS_SDEN1_MARK, PORT214_FN2), + PINMUX_DATA(MSIOF0L_RSCK_MARK, PORT214_FN3), + PINMUX_DATA(D30_MARK, PORT214_FN4), + PINMUX_DATA(LCDD23_MARK, PORT215_FN1), + PINMUX_DATA(TS_SCK1_MARK, PORT215_FN2), + PINMUX_DATA(MSIOF0L_RSYNC_MARK, PORT215_FN3), + PINMUX_DATA(D31_MARK, PORT215_FN4), + PINMUX_DATA(LCDDCK_MARK, PORT216_FN1), + PINMUX_DATA(LCDWR_MARK, PORT216_FN2), + PINMUX_DATA(PORT216_KEYOUT3_MARK, PORT216_FN3), + PINMUX_DATA(VIO_CLKR_MARK, PORT216_FN4), + PINMUX_DATA(LCDRD_MARK, PORT217_FN1), + PINMUX_DATA(DACK2_MARK, PORT217_FN2), + PINMUX_DATA(MSIOF0L_TSYNC_MARK, PORT217_FN3), + PINMUX_DATA(LCDHSYN_MARK, PORT218_FN1), + PINMUX_DATA(LCDCS_MARK, PORT218_FN2), + PINMUX_DATA(LCDCS2_MARK, PORT218_FN3), + PINMUX_DATA(DACK3_MARK, PORT218_FN4), + PINMUX_DATA(PORT218_VIO_CKOR_MARK, PORT218_FN5), + PINMUX_DATA(PORT218_KEYOUT4_MARK, PORT218_FN6), + PINMUX_DATA(LCDDISP_MARK, PORT219_FN1), + PINMUX_DATA(LCDRS_MARK, PORT219_FN2), + PINMUX_DATA(DREQ3_MARK, PORT219_FN3), + PINMUX_DATA(MSIOF0L_TSCK_MARK, PORT219_FN4), + PINMUX_DATA(LCDVSYN_MARK, PORT220_FN1), + PINMUX_DATA(LCDVSYN2_MARK, PORT220_FN2), + PINMUX_DATA(PORT220_KEYOUT5_MARK, PORT220_FN3), + PINMUX_DATA(LCDLCLK_MARK, PORT221_FN1), + PINMUX_DATA(DREQ1_MARK, PORT221_FN2), + PINMUX_DATA(PWEN_MARK, PORT221_FN3), + PINMUX_DATA(MSIOF0L_RXD_MARK, PORT221_FN4), + PINMUX_DATA(LCDDON_MARK, PORT222_FN1), + PINMUX_DATA(LCDDON2_MARK, PORT222_FN2), + PINMUX_DATA(DACK1_MARK, PORT222_FN3), + PINMUX_DATA(OVCN_MARK, PORT222_FN4), + PINMUX_DATA(MSIOF0L_TXD_MARK, PORT222_FN5), + PINMUX_DATA(SCIFA1_TXD_MARK, PORT225_FN1), + PINMUX_DATA(OVCN2_MARK, PORT225_FN2), + PINMUX_DATA(EXTLP_MARK, PORT226_FN1), + PINMUX_DATA(SCIFA1_SCK_MARK, PORT226_FN2), + PINMUX_DATA(USBTERM_MARK, PORT226_FN3), + PINMUX_DATA(PORT226_VIO_CKO2_MARK, PORT226_FN4), + PINMUX_DATA(SCIFA1_RTS_MARK, PORT227_FN1), + PINMUX_DATA(IDIN_MARK, PORT227_FN2), + PINMUX_DATA(SCIFA1_RXD_MARK, PORT228_FN1), + PINMUX_DATA(SCIFA1_CTS_MARK, PORT229_FN1), + PINMUX_DATA(MFG1_IN1_MARK, PORT229_FN2), + PINMUX_DATA(MSIOF1_TXD_MARK, PORT230_FN1), + PINMUX_DATA(SCIFA2_TXD2_MARK, PORT230_FN2), + PINMUX_DATA(PORT230_FSIAOMC_MARK, PORT230_FN3), + PINMUX_DATA(MSIOF1_TSYNC_MARK, PORT231_FN1), + PINMUX_DATA(SCIFA2_CTS2_MARK, PORT231_FN2), + PINMUX_DATA(PORT231_FSIAOLR_MARK, PORT231_FN3), + PINMUX_DATA(MSIOF1_TSCK_MARK, PORT232_FN1), + PINMUX_DATA(SCIFA2_SCK2_MARK, PORT232_FN2), + PINMUX_DATA(PORT232_FSIAOBT_MARK, PORT232_FN3), + PINMUX_DATA(MSIOF1_RXD_MARK, PORT233_FN1), + PINMUX_DATA(SCIFA2_RXD2_MARK, PORT233_FN2), + PINMUX_DATA(GPS_VCOTRIG_MARK, PORT233_FN3), + PINMUX_DATA(PORT233_FSIACK_MARK, PORT233_FN4), + PINMUX_DATA(MSIOF1_RSCK_MARK, PORT234_FN1), + PINMUX_DATA(SCIFA2_RTS2_MARK, PORT234_FN2), + PINMUX_DATA(PORT234_FSIAOSLD_MARK, PORT234_FN3), + PINMUX_DATA(MSIOF1_RSYNC_MARK, PORT235_FN1), + PINMUX_DATA(OPORT0_MARK, PORT235_FN2), + PINMUX_DATA(MFG1_IN2_MARK, PORT235_FN3), + PINMUX_DATA(PORT235_FSIAILR_MARK, PORT235_FN4), + PINMUX_DATA(MSIOF1_MCK0_MARK, PORT236_FN1), + PINMUX_DATA(I2C_SDA2_MARK, PORT236_FN2), + PINMUX_DATA(PORT236_FSIAIBT_MARK, PORT236_FN3), + PINMUX_DATA(MSIOF1_MCK1_MARK, PORT237_FN1), + PINMUX_DATA(I2C_SCL2_MARK, PORT237_FN2), + PINMUX_DATA(PORT237_FSIAISLD_MARK, PORT237_FN3), + PINMUX_DATA(MSIOF1_SS1_MARK, PORT238_FN1), + PINMUX_DATA(EDBGREQ3_MARK, PORT238_FN2), + + /* 55-5 (FN) */ + PINMUX_DATA(MSIOF1_SS2_MARK, PORT239_FN1), + PINMUX_DATA(SCIFA6_TXD_MARK, PORT240_FN1), + PINMUX_DATA(PORT241_IRDA_OUT_MARK, PORT241_FN1), + PINMUX_DATA(PORT241_IROUT_MARK, PORT241_FN2), + PINMUX_DATA(MFG4_OUT1_MARK, PORT241_FN3), + PINMUX_DATA(TPU4TO0_MARK, PORT241_FN4), + PINMUX_DATA(PORT242_IRDA_IN_MARK, PORT242_FN1), + PINMUX_DATA(MFG4_IN2_MARK, PORT242_FN2), + PINMUX_DATA(PORT243_IRDA_FIRSEL_MARK, PORT243_FN1), + PINMUX_DATA(PORT243_VIO_CKO2_MARK, PORT243_FN2), + PINMUX_DATA(PORT244_SCIFA5_CTS_MARK, PORT244_FN1), + PINMUX_DATA(MFG2_IN1_MARK, PORT244_FN2), + PINMUX_DATA(PORT244_SCIFB_CTS_MARK, PORT244_FN3), + PINMUX_DATA(PORT245_SCIFA5_RTS_MARK, PORT245_FN1), + PINMUX_DATA(MFG2_IN2_MARK, PORT245_FN2), + PINMUX_DATA(PORT245_SCIFB_RTS_MARK, PORT245_FN3), + PINMUX_DATA(PORT246_SCIFA5_RXD_MARK, PORT246_FN1), + PINMUX_DATA(MFG1_OUT1_MARK, PORT246_FN2), + PINMUX_DATA(PORT246_SCIFB_RXD_MARK, PORT246_FN3), + PINMUX_DATA(TPU1TO0_MARK, PORT246_FN4), + PINMUX_DATA(PORT247_SCIFA5_TXD_MARK, PORT247_FN1), + PINMUX_DATA(MFG3_OUT2_MARK, PORT247_FN2), + PINMUX_DATA(PORT247_SCIFB_TXD_MARK, PORT247_FN3), + PINMUX_DATA(TPU3TO1_MARK, PORT247_FN4), + PINMUX_DATA(PORT248_SCIFA5_SCK_MARK, PORT248_FN1), + PINMUX_DATA(MFG2_OUT1_MARK, PORT248_FN2), + PINMUX_DATA(PORT248_SCIFB_SCK_MARK, PORT248_FN3), + PINMUX_DATA(TPU2TO0_MARK, PORT248_FN4), + PINMUX_DATA(PORT249_IROUT_MARK, PORT249_FN1), + PINMUX_DATA(MFG4_IN1_MARK, PORT249_FN2), + PINMUX_DATA(SDHICLK0_MARK, PORT250_FN1), + PINMUX_DATA(TCK2_SWCLK_MC0_MARK, PORT250_FN2), + PINMUX_DATA(SDHICD0_MARK, PORT251_FN1), + PINMUX_DATA(SDHID0_0_MARK, PORT252_FN1), + PINMUX_DATA(TMS2_SWDIO_MC0_MARK, PORT252_FN2), + PINMUX_DATA(SDHID0_1_MARK, PORT253_FN1), + PINMUX_DATA(TDO2_SWO0_MC0_MARK, PORT253_FN2), + PINMUX_DATA(SDHID0_2_MARK, PORT254_FN1), + PINMUX_DATA(TDI2_MARK, PORT254_FN2), + PINMUX_DATA(SDHID0_3_MARK, PORT255_FN1), + PINMUX_DATA(RTCK2_SWO1_MC0_MARK, PORT255_FN2), + PINMUX_DATA(SDHICMD0_MARK, PORT256_FN1), + PINMUX_DATA(TRST2_MARK, PORT256_FN2), + PINMUX_DATA(SDHIWP0_MARK, PORT257_FN1), + PINMUX_DATA(EDBGREQ2_MARK, PORT257_FN2), + PINMUX_DATA(SDHICLK1_MARK, PORT258_FN1), + PINMUX_DATA(TCK3_SWCLK_MC1_MARK, PORT258_FN2), + PINMUX_DATA(SDHID1_0_MARK, PORT259_FN1), + PINMUX_DATA(M11_SLCD_SO2_MARK, PORT259_FN2), + PINMUX_DATA(TS_SPSYNC2_MARK, PORT259_FN3), + PINMUX_DATA(TMS3_SWDIO_MC1_MARK, PORT259_FN4), + PINMUX_DATA(SDHID1_1_MARK, PORT260_FN1), + PINMUX_DATA(M9_SLCD_A02_MARK, PORT260_FN2), + PINMUX_DATA(TS_SDAT2_MARK, PORT260_FN3), + PINMUX_DATA(TDO3_SWO0_MC1_MARK, PORT260_FN4), + PINMUX_DATA(SDHID1_2_MARK, PORT261_FN1), + PINMUX_DATA(M10_SLCD_CK2_MARK, PORT261_FN2), + PINMUX_DATA(TS_SDEN2_MARK, PORT261_FN3), + PINMUX_DATA(TDI3_MARK, PORT261_FN4), + PINMUX_DATA(SDHID1_3_MARK, PORT262_FN1), + PINMUX_DATA(M12_SLCD_CE2_MARK, PORT262_FN2), + PINMUX_DATA(TS_SCK2_MARK, PORT262_FN3), + PINMUX_DATA(RTCK3_SWO1_MC1_MARK, PORT262_FN4), + PINMUX_DATA(SDHICMD1_MARK, PORT263_FN1), + PINMUX_DATA(TRST3_MARK, PORT263_FN2), + PINMUX_DATA(RESETOUTS_MARK, PORT264_FN1), +}; + +#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA) +#define GPIO_PORT_265() _265(_GPIO_PORT, , unused) +#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK) + +static struct pinmux_gpio pinmux_gpios[] = { + /* 55-1 -> 55-5 (GPIO) */ + GPIO_PORT_265(), + + /* Special Pull-up / Pull-down Functions */ + GPIO_FN(PORT66_KEYIN0_PU), GPIO_FN(PORT67_KEYIN1_PU), + GPIO_FN(PORT68_KEYIN2_PU), GPIO_FN(PORT69_KEYIN3_PU), + GPIO_FN(PORT70_KEYIN4_PU), GPIO_FN(PORT71_KEYIN5_PU), + GPIO_FN(PORT72_KEYIN6_PU), + + /* 55-1 (FN) */ + GPIO_FN(VBUS_0), + GPIO_FN(CPORT0), + GPIO_FN(CPORT1), + GPIO_FN(CPORT2), + GPIO_FN(CPORT3), + GPIO_FN(CPORT4), + GPIO_FN(CPORT5), + GPIO_FN(CPORT6), + GPIO_FN(CPORT7), + GPIO_FN(CPORT8), + GPIO_FN(CPORT9), + GPIO_FN(CPORT10), + GPIO_FN(CPORT11), GPIO_FN(SIN2), + GPIO_FN(CPORT12), GPIO_FN(XCTS2), + GPIO_FN(CPORT13), GPIO_FN(RFSPO4), + GPIO_FN(CPORT14), GPIO_FN(RFSPO5), + GPIO_FN(CPORT15), GPIO_FN(SCIFA0_SCK), GPIO_FN(GPS_AGC2), + GPIO_FN(CPORT16), GPIO_FN(SCIFA0_TXD), GPIO_FN(GPS_AGC3), + GPIO_FN(CPORT17_IC_OE), GPIO_FN(SOUT2), + GPIO_FN(CPORT18), GPIO_FN(XRTS2), GPIO_FN(PORT19_VIO_CKO2), + GPIO_FN(CPORT19_MPORT1), + GPIO_FN(CPORT20), GPIO_FN(RFSPO6), + GPIO_FN(CPORT21), GPIO_FN(STATUS0), + GPIO_FN(CPORT22), GPIO_FN(STATUS1), + GPIO_FN(CPORT23), GPIO_FN(STATUS2), GPIO_FN(RFSPO7), + GPIO_FN(B_SYNLD1), + GPIO_FN(B_SYNLD2), GPIO_FN(SYSENMSK), + GPIO_FN(XMAINPS), + GPIO_FN(XDIVPS), + GPIO_FN(XIDRST), + GPIO_FN(IDCLK), GPIO_FN(IC_DP), + GPIO_FN(IDIO), GPIO_FN(IC_DM), + GPIO_FN(SOUT1), GPIO_FN(SCIFA4_TXD), GPIO_FN(M02_BERDAT), + GPIO_FN(SIN1), GPIO_FN(SCIFA4_RXD), GPIO_FN(XWUP), + GPIO_FN(XRTS1), GPIO_FN(SCIFA4_RTS), GPIO_FN(M03_BERCLK), + GPIO_FN(XCTS1), GPIO_FN(SCIFA4_CTS), + GPIO_FN(PCMCLKO), + GPIO_FN(SYNC8KO), + + /* 55-2 (FN) */ + GPIO_FN(DNPCM_A), + GPIO_FN(UPPCM_A), + GPIO_FN(VACK), + GPIO_FN(XTALB1L), + GPIO_FN(GPS_AGC1), GPIO_FN(SCIFA0_RTS), + GPIO_FN(GPS_AGC4), GPIO_FN(SCIFA0_RXD), + GPIO_FN(GPS_PWRDOWN), GPIO_FN(SCIFA0_CTS), + GPIO_FN(GPS_IM), + GPIO_FN(GPS_IS), + GPIO_FN(GPS_QM), + GPIO_FN(GPS_QS), + GPIO_FN(FMSOCK), GPIO_FN(PORT49_IRDA_OUT), GPIO_FN(PORT49_IROUT), + GPIO_FN(FMSOOLR), GPIO_FN(BBIF2_TSYNC2), GPIO_FN(TPU2TO2), + GPIO_FN(IPORT3), GPIO_FN(FMSIOLR), + GPIO_FN(FMSOOBT), GPIO_FN(BBIF2_TSCK2), GPIO_FN(TPU2TO3), + GPIO_FN(OPORT1), GPIO_FN(FMSIOBT), + GPIO_FN(FMSOSLD), GPIO_FN(BBIF2_TXD2), GPIO_FN(OPORT2), + GPIO_FN(FMSOILR), GPIO_FN(PORT53_IRDA_IN), GPIO_FN(TPU3TO3), + GPIO_FN(OPORT3), GPIO_FN(FMSIILR), + GPIO_FN(FMSOIBT), GPIO_FN(PORT54_IRDA_FIRSEL), GPIO_FN(TPU3TO2), + GPIO_FN(FMSIIBT), + GPIO_FN(FMSISLD), GPIO_FN(MFG0_OUT1), GPIO_FN(TPU0TO0), + GPIO_FN(A0_EA0), GPIO_FN(BS), + GPIO_FN(A12_EA12), GPIO_FN(PORT58_VIO_CKOR), GPIO_FN(TPU4TO2), + GPIO_FN(A13_EA13), GPIO_FN(PORT59_IROUT), GPIO_FN(MFG0_OUT2), + GPIO_FN(TPU0TO1), + GPIO_FN(A14_EA14), GPIO_FN(PORT60_KEYOUT5), + GPIO_FN(A15_EA15), GPIO_FN(PORT61_KEYOUT4), + GPIO_FN(A16_EA16), GPIO_FN(PORT62_KEYOUT3), GPIO_FN(MSIOF0_SS1), + GPIO_FN(A17_EA17), GPIO_FN(PORT63_KEYOUT2), GPIO_FN(MSIOF0_TSYNC), + GPIO_FN(A18_EA18), GPIO_FN(PORT64_KEYOUT1), GPIO_FN(MSIOF0_TSCK), + GPIO_FN(A19_EA19), GPIO_FN(PORT65_KEYOUT0), GPIO_FN(MSIOF0_TXD), + GPIO_FN(A20_EA20), GPIO_FN(PORT66_KEYIN0), GPIO_FN(MSIOF0_RSCK), + GPIO_FN(A21_EA21), GPIO_FN(PORT67_KEYIN1), GPIO_FN(MSIOF0_RSYNC), + GPIO_FN(A22_EA22), GPIO_FN(PORT68_KEYIN2), GPIO_FN(MSIOF0_MCK0), + GPIO_FN(A23_EA23), GPIO_FN(PORT69_KEYIN3), GPIO_FN(MSIOF0_MCK1), + GPIO_FN(A24_EA24), GPIO_FN(PORT70_KEYIN4), GPIO_FN(MSIOF0_RXD), + GPIO_FN(A25_EA25), GPIO_FN(PORT71_KEYIN5), GPIO_FN(MSIOF0_SS2), + GPIO_FN(A26), GPIO_FN(PORT72_KEYIN6), + GPIO_FN(D0_ED0_NAF0), + GPIO_FN(D1_ED1_NAF1), + GPIO_FN(D2_ED2_NAF2), + GPIO_FN(D3_ED3_NAF3), + GPIO_FN(D4_ED4_NAF4), + GPIO_FN(D5_ED5_NAF5), + GPIO_FN(D6_ED6_NAF6), + GPIO_FN(D7_ED7_NAF7), + GPIO_FN(D8_ED8_NAF8), + GPIO_FN(D9_ED9_NAF9), + GPIO_FN(D10_ED10_NAF10), + GPIO_FN(D11_ED11_NAF11), + GPIO_FN(D12_ED12_NAF12), + GPIO_FN(D13_ED13_NAF13), + GPIO_FN(D14_ED14_NAF14), + GPIO_FN(D15_ED15_NAF15), + GPIO_FN(CS4), + GPIO_FN(CS5A), GPIO_FN(FMSICK), + + /* 55-3 (FN) */ + GPIO_FN(CS5B), GPIO_FN(FCE1), + GPIO_FN(CS6B), GPIO_FN(XCS2), GPIO_FN(CS6A), GPIO_FN(DACK0), + GPIO_FN(FCE0), + GPIO_FN(WAIT), GPIO_FN(DREQ0), + GPIO_FN(RD_XRD), + GPIO_FN(WE0_XWR0_FWE), + GPIO_FN(WE1_XWR1), + GPIO_FN(FRB), + GPIO_FN(CKO), + GPIO_FN(NBRSTOUT), + GPIO_FN(NBRST), + GPIO_FN(GPS_EPPSIN), + GPIO_FN(LATCHPULSE), + GPIO_FN(LTESIGNAL), + GPIO_FN(LEGACYSTATE), + GPIO_FN(TCKON), + GPIO_FN(VIO_VD), GPIO_FN(PORT128_KEYOUT0), GPIO_FN(IPORT0), + GPIO_FN(VIO_HD), GPIO_FN(PORT129_KEYOUT1), GPIO_FN(IPORT1), + GPIO_FN(VIO_D0), GPIO_FN(PORT130_KEYOUT2), GPIO_FN(PORT130_MSIOF2_RXD), + GPIO_FN(VIO_D1), GPIO_FN(PORT131_KEYOUT3), GPIO_FN(PORT131_MSIOF2_SS1), + GPIO_FN(VIO_D2), GPIO_FN(PORT132_KEYOUT4), GPIO_FN(PORT132_MSIOF2_SS2), + GPIO_FN(VIO_D3), GPIO_FN(PORT133_KEYOUT5), + GPIO_FN(PORT133_MSIOF2_TSYNC), + GPIO_FN(VIO_D4), GPIO_FN(PORT134_KEYIN0), GPIO_FN(PORT134_MSIOF2_TXD), + GPIO_FN(VIO_D5), GPIO_FN(PORT135_KEYIN1), GPIO_FN(PORT135_MSIOF2_TSCK), + GPIO_FN(VIO_D6), GPIO_FN(PORT136_KEYIN2), + GPIO_FN(VIO_D7), GPIO_FN(PORT137_KEYIN3), + GPIO_FN(VIO_D8), GPIO_FN(M9_SLCD_A01), GPIO_FN(PORT138_FSIAOMC), + GPIO_FN(VIO_D9), GPIO_FN(M10_SLCD_CK1), GPIO_FN(PORT139_FSIAOLR), + GPIO_FN(VIO_D10), GPIO_FN(M11_SLCD_SO1), GPIO_FN(TPU0TO2), + GPIO_FN(PORT140_FSIAOBT), + GPIO_FN(VIO_D11), GPIO_FN(M12_SLCD_CE1), GPIO_FN(TPU0TO3), + GPIO_FN(PORT141_FSIAOSLD), + GPIO_FN(VIO_D12), GPIO_FN(M13_BSW), GPIO_FN(PORT142_FSIACK), + GPIO_FN(VIO_D13), GPIO_FN(M14_GSW), GPIO_FN(PORT143_FSIAILR), + GPIO_FN(VIO_D14), GPIO_FN(M15_RSW), GPIO_FN(PORT144_FSIAIBT), + GPIO_FN(VIO_D15), GPIO_FN(TPU1TO3), GPIO_FN(PORT145_FSIAISLD), + GPIO_FN(VIO_CLK), GPIO_FN(PORT146_KEYIN4), GPIO_FN(IPORT2), + GPIO_FN(VIO_FIELD), GPIO_FN(PORT147_KEYIN5), + GPIO_FN(VIO_CKO), GPIO_FN(PORT148_KEYIN6), + GPIO_FN(A27), GPIO_FN(RDWR_XWE), GPIO_FN(MFG0_IN1), + GPIO_FN(MFG0_IN2), + GPIO_FN(TS_SPSYNC3), GPIO_FN(MSIOF2_RSCK), + GPIO_FN(TS_SDAT3), GPIO_FN(MSIOF2_RSYNC), + GPIO_FN(TPU1TO2), GPIO_FN(TS_SDEN3), GPIO_FN(PORT153_MSIOF2_SS1), + GPIO_FN(SOUT3), GPIO_FN(SCIFA2_TXD1), GPIO_FN(MSIOF2_MCK0), + GPIO_FN(SIN3), GPIO_FN(SCIFA2_RXD1), GPIO_FN(MSIOF2_MCK1), + GPIO_FN(XRTS3), GPIO_FN(SCIFA2_RTS1), GPIO_FN(PORT156_MSIOF2_SS2), + GPIO_FN(XCTS3), GPIO_FN(SCIFA2_CTS1), GPIO_FN(PORT157_MSIOF2_RXD), + + /* 55-4 (FN) */ + GPIO_FN(DINT), GPIO_FN(SCIFA2_SCK1), GPIO_FN(TS_SCK3), + GPIO_FN(PORT159_SCIFB_SCK), GPIO_FN(PORT159_SCIFA5_SCK), GPIO_FN(NMI), + GPIO_FN(PORT160_SCIFB_TXD), GPIO_FN(PORT160_SCIFA5_TXD), GPIO_FN(SOUT0), + GPIO_FN(PORT161_SCIFB_CTS), GPIO_FN(PORT161_SCIFA5_CTS), GPIO_FN(XCTS0), + GPIO_FN(MFG3_IN2), + GPIO_FN(PORT162_SCIFB_RXD), GPIO_FN(PORT162_SCIFA5_RXD), GPIO_FN(SIN0), + GPIO_FN(MFG3_IN1), + GPIO_FN(PORT163_SCIFB_RTS), GPIO_FN(PORT163_SCIFA5_RTS), GPIO_FN(XRTS0), + GPIO_FN(MFG3_OUT1), GPIO_FN(TPU3TO0), + GPIO_FN(LCDD0), GPIO_FN(PORT192_KEYOUT0), GPIO_FN(EXT_CKI), + GPIO_FN(LCDD1), GPIO_FN(PORT193_KEYOUT1), GPIO_FN(PORT193_SCIFA5_CTS), + GPIO_FN(BBIF2_TSYNC1), + GPIO_FN(LCDD2), GPIO_FN(PORT194_KEYOUT2), GPIO_FN(PORT194_SCIFA5_RTS), + GPIO_FN(BBIF2_TSCK1), + GPIO_FN(LCDD3), GPIO_FN(PORT195_KEYOUT3), GPIO_FN(PORT195_SCIFA5_RXD), + GPIO_FN(BBIF2_TXD1), + GPIO_FN(LCDD4), GPIO_FN(PORT196_KEYOUT4), GPIO_FN(PORT196_SCIFA5_TXD), + GPIO_FN(LCDD5), GPIO_FN(PORT197_KEYOUT5), GPIO_FN(PORT197_SCIFA5_SCK), + GPIO_FN(MFG2_OUT2), + GPIO_FN(LCDD6), + GPIO_FN(LCDD7), GPIO_FN(TPU4TO1), GPIO_FN(MFG4_OUT2), + GPIO_FN(LCDD8), GPIO_FN(PORT200_KEYIN0), GPIO_FN(VIO_DR0), + GPIO_FN(D16), + GPIO_FN(LCDD9), GPIO_FN(PORT201_KEYIN1), GPIO_FN(VIO_DR1), + GPIO_FN(D17), + GPIO_FN(LCDD10), GPIO_FN(PORT202_KEYIN2), GPIO_FN(VIO_DR2), + GPIO_FN(D18), + GPIO_FN(LCDD11), GPIO_FN(PORT203_KEYIN3), GPIO_FN(VIO_DR3), + GPIO_FN(D19), + GPIO_FN(LCDD12), GPIO_FN(PORT204_KEYIN4), GPIO_FN(VIO_DR4), + GPIO_FN(D20), + GPIO_FN(LCDD13), GPIO_FN(PORT205_KEYIN5), GPIO_FN(VIO_DR5), + GPIO_FN(D21), + GPIO_FN(LCDD14), GPIO_FN(PORT206_KEYIN6), GPIO_FN(VIO_DR6), + GPIO_FN(D22), + GPIO_FN(LCDD15), GPIO_FN(PORT207_MSIOF0L_SS1), GPIO_FN(PORT207_KEYOUT0), + GPIO_FN(VIO_DR7), GPIO_FN(D23), + GPIO_FN(LCDD16), GPIO_FN(PORT208_MSIOF0L_SS2), GPIO_FN(PORT208_KEYOUT1), + GPIO_FN(VIO_VDR), GPIO_FN(D24), + GPIO_FN(LCDD17), GPIO_FN(PORT209_KEYOUT2), GPIO_FN(VIO_HDR), + GPIO_FN(D25), + GPIO_FN(LCDD18), GPIO_FN(DREQ2), GPIO_FN(PORT210_MSIOF0L_SS1), + GPIO_FN(D26), + GPIO_FN(LCDD19), GPIO_FN(PORT211_MSIOF0L_SS2), GPIO_FN(D27), + GPIO_FN(LCDD20), GPIO_FN(TS_SPSYNC1), GPIO_FN(MSIOF0L_MCK0), + GPIO_FN(D28), + GPIO_FN(LCDD21), GPIO_FN(TS_SDAT1), GPIO_FN(MSIOF0L_MCK1), + GPIO_FN(D29), + GPIO_FN(LCDD22), GPIO_FN(TS_SDEN1), GPIO_FN(MSIOF0L_RSCK), + GPIO_FN(D30), + GPIO_FN(LCDD23), GPIO_FN(TS_SCK1), GPIO_FN(MSIOF0L_RSYNC), + GPIO_FN(D31), + GPIO_FN(LCDDCK), GPIO_FN(LCDWR), GPIO_FN(PORT216_KEYOUT3), + GPIO_FN(VIO_CLKR), + GPIO_FN(LCDRD), GPIO_FN(DACK2), GPIO_FN(MSIOF0L_TSYNC), + GPIO_FN(LCDHSYN), GPIO_FN(LCDCS), GPIO_FN(LCDCS2), GPIO_FN(DACK3), + GPIO_FN(PORT218_VIO_CKOR), GPIO_FN(PORT218_KEYOUT4), + GPIO_FN(LCDDISP), GPIO_FN(LCDRS), GPIO_FN(DREQ3), GPIO_FN(MSIOF0L_TSCK), + GPIO_FN(LCDVSYN), GPIO_FN(LCDVSYN2), GPIO_FN(PORT220_KEYOUT5), + GPIO_FN(LCDLCLK), GPIO_FN(DREQ1), GPIO_FN(PWEN), GPIO_FN(MSIOF0L_RXD), + GPIO_FN(LCDDON), GPIO_FN(LCDDON2), GPIO_FN(DACK1), GPIO_FN(OVCN), + GPIO_FN(MSIOF0L_TXD), + GPIO_FN(SCIFA1_TXD), GPIO_FN(OVCN2), + GPIO_FN(EXTLP), GPIO_FN(SCIFA1_SCK), GPIO_FN(USBTERM), + GPIO_FN(PORT226_VIO_CKO2), + GPIO_FN(SCIFA1_RTS), GPIO_FN(IDIN), + GPIO_FN(SCIFA1_RXD), + GPIO_FN(SCIFA1_CTS), GPIO_FN(MFG1_IN1), + GPIO_FN(MSIOF1_TXD), GPIO_FN(SCIFA2_TXD2), GPIO_FN(PORT230_FSIAOMC), + GPIO_FN(MSIOF1_TSYNC), GPIO_FN(SCIFA2_CTS2), GPIO_FN(PORT231_FSIAOLR), + GPIO_FN(MSIOF1_TSCK), GPIO_FN(SCIFA2_SCK2), GPIO_FN(PORT232_FSIAOBT), + GPIO_FN(MSIOF1_RXD), GPIO_FN(SCIFA2_RXD2), GPIO_FN(GPS_VCOTRIG), + GPIO_FN(PORT233_FSIACK), + GPIO_FN(MSIOF1_RSCK), GPIO_FN(SCIFA2_RTS2), GPIO_FN(PORT234_FSIAOSLD), + GPIO_FN(MSIOF1_RSYNC), GPIO_FN(OPORT0), GPIO_FN(MFG1_IN2), + GPIO_FN(PORT235_FSIAILR), + GPIO_FN(MSIOF1_MCK0), GPIO_FN(I2C_SDA2), GPIO_FN(PORT236_FSIAIBT), + GPIO_FN(MSIOF1_MCK1), GPIO_FN(I2C_SCL2), GPIO_FN(PORT237_FSIAISLD), + GPIO_FN(MSIOF1_SS1), GPIO_FN(EDBGREQ3), + + /* 55-5 (FN) */ + GPIO_FN(MSIOF1_SS2), + GPIO_FN(SCIFA6_TXD), + GPIO_FN(PORT241_IRDA_OUT), GPIO_FN(PORT241_IROUT), GPIO_FN(MFG4_OUT1), + GPIO_FN(TPU4TO0), + GPIO_FN(PORT242_IRDA_IN), GPIO_FN(MFG4_IN2), + GPIO_FN(PORT243_IRDA_FIRSEL), GPIO_FN(PORT243_VIO_CKO2), + GPIO_FN(PORT244_SCIFA5_CTS), GPIO_FN(MFG2_IN1), + GPIO_FN(PORT244_SCIFB_CTS), + GPIO_FN(PORT245_SCIFA5_RTS), GPIO_FN(MFG2_IN2), + GPIO_FN(PORT245_SCIFB_RTS), + GPIO_FN(PORT246_SCIFA5_RXD), GPIO_FN(MFG1_OUT1), + GPIO_FN(PORT246_SCIFB_RXD), GPIO_FN(TPU1TO0), + GPIO_FN(PORT247_SCIFA5_TXD), GPIO_FN(MFG3_OUT2), + GPIO_FN(PORT247_SCIFB_TXD), GPIO_FN(TPU3TO1), + GPIO_FN(PORT248_SCIFA5_SCK), GPIO_FN(MFG2_OUT1), + GPIO_FN(PORT248_SCIFB_SCK), GPIO_FN(TPU2TO0), + GPIO_FN(PORT249_IROUT), GPIO_FN(MFG4_IN1), + GPIO_FN(SDHICLK0), GPIO_FN(TCK2_SWCLK_MC0), + GPIO_FN(SDHICD0), + GPIO_FN(SDHID0_0), GPIO_FN(TMS2_SWDIO_MC0), + GPIO_FN(SDHID0_1), GPIO_FN(TDO2_SWO0_MC0), + GPIO_FN(SDHID0_2), GPIO_FN(TDI2), + GPIO_FN(SDHID0_3), GPIO_FN(RTCK2_SWO1_MC0), + GPIO_FN(SDHICMD0), GPIO_FN(TRST2), + GPIO_FN(SDHIWP0), GPIO_FN(EDBGREQ2), + GPIO_FN(SDHICLK1), GPIO_FN(TCK3_SWCLK_MC1), + GPIO_FN(SDHID1_0), GPIO_FN(M11_SLCD_SO2), GPIO_FN(TS_SPSYNC2), + GPIO_FN(TMS3_SWDIO_MC1), + GPIO_FN(SDHID1_1), GPIO_FN(M9_SLCD_A02), GPIO_FN(TS_SDAT2), + GPIO_FN(TDO3_SWO0_MC1), + GPIO_FN(SDHID1_2), GPIO_FN(M10_SLCD_CK2), GPIO_FN(TS_SDEN2), + GPIO_FN(TDI3), + GPIO_FN(SDHID1_3), GPIO_FN(M12_SLCD_CE2), GPIO_FN(TS_SCK2), + GPIO_FN(RTCK3_SWO1_MC1), + GPIO_FN(SDHICMD1), GPIO_FN(TRST3), + GPIO_FN(RESETOUTS), +}; + +/* helper for top 4 bits in PORTnCR */ +#define PCRH(in, in_pd, in_pu, out) \ + 0, (out), (in), 0, \ + 0, 0, 0, 0, \ + 0, 0, (in_pd), 0, \ + 0, 0, (in_pu), 0 + +#define PORTCR(nr, reg) \ + { PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) { \ + PCRH(PORT##nr##_IN, PORT##nr##_IN_PD, \ + PORT##nr##_IN_PU, PORT##nr##_OUT), \ + PORT##nr##_FN0, PORT##nr##_FN1, \ + PORT##nr##_FN2, PORT##nr##_FN3, \ + PORT##nr##_FN4, PORT##nr##_FN5, \ + PORT##nr##_FN6, PORT##nr##_FN7 } \ + } + +static struct pinmux_cfg_reg pinmux_config_regs[] = { + PORTCR(0, 0xe6050000), /* PORT0CR */ + PORTCR(1, 0xe6050001), /* PORT1CR */ + PORTCR(2, 0xe6050002), /* PORT2CR */ + PORTCR(3, 0xe6050003), /* PORT3CR */ + PORTCR(4, 0xe6050004), /* PORT4CR */ + PORTCR(5, 0xe6050005), /* PORT5CR */ + PORTCR(6, 0xe6050006), /* PORT6CR */ + PORTCR(7, 0xe6050007), /* PORT7CR */ + PORTCR(8, 0xe6050008), /* PORT8CR */ + PORTCR(9, 0xe6050009), /* PORT9CR */ + + PORTCR(10, 0xe605000a), /* PORT10CR */ + PORTCR(11, 0xe605000b), /* PORT11CR */ + PORTCR(12, 0xe605000c), /* PORT12CR */ + PORTCR(13, 0xe605000d), /* PORT13CR */ + PORTCR(14, 0xe605000e), /* PORT14CR */ + PORTCR(15, 0xe605000f), /* PORT15CR */ + PORTCR(16, 0xe6050010), /* PORT16CR */ + PORTCR(17, 0xe6050011), /* PORT17CR */ + PORTCR(18, 0xe6050012), /* PORT18CR */ + PORTCR(19, 0xe6050013), /* PORT19CR */ + + PORTCR(20, 0xe6050014), /* PORT20CR */ + PORTCR(21, 0xe6050015), /* PORT21CR */ + PORTCR(22, 0xe6050016), /* PORT22CR */ + PORTCR(23, 0xe6050017), /* PORT23CR */ + PORTCR(24, 0xe6050018), /* PORT24CR */ + PORTCR(25, 0xe6050019), /* PORT25CR */ + PORTCR(26, 0xe605001a), /* PORT26CR */ + PORTCR(27, 0xe605001b), /* PORT27CR */ + PORTCR(28, 0xe605001c), /* PORT28CR */ + PORTCR(29, 0xe605001d), /* PORT29CR */ + + PORTCR(30, 0xe605001e), /* PORT30CR */ + PORTCR(31, 0xe605001f), /* PORT31CR */ + PORTCR(32, 0xe6050020), /* PORT32CR */ + PORTCR(33, 0xe6050021), /* PORT33CR */ + PORTCR(34, 0xe6050022), /* PORT34CR */ + PORTCR(35, 0xe6050023), /* PORT35CR */ + PORTCR(36, 0xe6050024), /* PORT36CR */ + PORTCR(37, 0xe6050025), /* PORT37CR */ + PORTCR(38, 0xe6050026), /* PORT38CR */ + PORTCR(39, 0xe6050027), /* PORT39CR */ + + PORTCR(40, 0xe6050028), /* PORT40CR */ + PORTCR(41, 0xe6050029), /* PORT41CR */ + PORTCR(42, 0xe605002a), /* PORT42CR */ + PORTCR(43, 0xe605002b), /* PORT43CR */ + PORTCR(44, 0xe605002c), /* PORT44CR */ + PORTCR(45, 0xe605002d), /* PORT45CR */ + PORTCR(46, 0xe605002e), /* PORT46CR */ + PORTCR(47, 0xe605002f), /* PORT47CR */ + PORTCR(48, 0xe6050030), /* PORT48CR */ + PORTCR(49, 0xe6050031), /* PORT49CR */ + + PORTCR(50, 0xe6050032), /* PORT50CR */ + PORTCR(51, 0xe6050033), /* PORT51CR */ + PORTCR(52, 0xe6050034), /* PORT52CR */ + PORTCR(53, 0xe6050035), /* PORT53CR */ + PORTCR(54, 0xe6050036), /* PORT54CR */ + PORTCR(55, 0xe6050037), /* PORT55CR */ + PORTCR(56, 0xe6050038), /* PORT56CR */ + PORTCR(57, 0xe6050039), /* PORT57CR */ + PORTCR(58, 0xe605003a), /* PORT58CR */ + PORTCR(59, 0xe605003b), /* PORT59CR */ + + PORTCR(60, 0xe605003c), /* PORT60CR */ + PORTCR(61, 0xe605003d), /* PORT61CR */ + PORTCR(62, 0xe605003e), /* PORT62CR */ + PORTCR(63, 0xe605003f), /* PORT63CR */ + PORTCR(64, 0xe6050040), /* PORT64CR */ + PORTCR(65, 0xe6050041), /* PORT65CR */ + PORTCR(66, 0xe6050042), /* PORT66CR */ + PORTCR(67, 0xe6050043), /* PORT67CR */ + PORTCR(68, 0xe6050044), /* PORT68CR */ + PORTCR(69, 0xe6050045), /* PORT69CR */ + + PORTCR(70, 0xe6050046), /* PORT70CR */ + PORTCR(71, 0xe6050047), /* PORT71CR */ + PORTCR(72, 0xe6050048), /* PORT72CR */ + PORTCR(73, 0xe6050049), /* PORT73CR */ + PORTCR(74, 0xe605004a), /* PORT74CR */ + PORTCR(75, 0xe605004b), /* PORT75CR */ + PORTCR(76, 0xe605004c), /* PORT76CR */ + PORTCR(77, 0xe605004d), /* PORT77CR */ + PORTCR(78, 0xe605004e), /* PORT78CR */ + PORTCR(79, 0xe605004f), /* PORT79CR */ + + PORTCR(80, 0xe6050050), /* PORT80CR */ + PORTCR(81, 0xe6050051), /* PORT81CR */ + PORTCR(82, 0xe6050052), /* PORT82CR */ + PORTCR(83, 0xe6050053), /* PORT83CR */ + PORTCR(84, 0xe6050054), /* PORT84CR */ + PORTCR(85, 0xe6050055), /* PORT85CR */ + PORTCR(86, 0xe6050056), /* PORT86CR */ + PORTCR(87, 0xe6050057), /* PORT87CR */ + PORTCR(88, 0xe6050058), /* PORT88CR */ + PORTCR(89, 0xe6050059), /* PORT89CR */ + + PORTCR(90, 0xe605005a), /* PORT90CR */ + PORTCR(91, 0xe605005b), /* PORT91CR */ + PORTCR(92, 0xe605005c), /* PORT92CR */ + PORTCR(93, 0xe605005d), /* PORT93CR */ + PORTCR(94, 0xe605005e), /* PORT94CR */ + PORTCR(95, 0xe605005f), /* PORT95CR */ + PORTCR(96, 0xe6050060), /* PORT96CR */ + PORTCR(97, 0xe6050061), /* PORT97CR */ + PORTCR(98, 0xe6050062), /* PORT98CR */ + PORTCR(99, 0xe6050063), /* PORT99CR */ + + PORTCR(100, 0xe6050064), /* PORT100CR */ + PORTCR(101, 0xe6050065), /* PORT101CR */ + PORTCR(102, 0xe6050066), /* PORT102CR */ + PORTCR(103, 0xe6050067), /* PORT103CR */ + PORTCR(104, 0xe6050068), /* PORT104CR */ + PORTCR(105, 0xe6050069), /* PORT105CR */ + PORTCR(106, 0xe605006a), /* PORT106CR */ + PORTCR(107, 0xe605006b), /* PORT107CR */ + PORTCR(108, 0xe605006c), /* PORT108CR */ + PORTCR(109, 0xe605006d), /* PORT109CR */ + + PORTCR(110, 0xe605006e), /* PORT110CR */ + PORTCR(111, 0xe605006f), /* PORT111CR */ + PORTCR(112, 0xe6050070), /* PORT112CR */ + PORTCR(113, 0xe6050071), /* PORT113CR */ + PORTCR(114, 0xe6050072), /* PORT114CR */ + PORTCR(115, 0xe6050073), /* PORT115CR */ + PORTCR(116, 0xe6050074), /* PORT116CR */ + PORTCR(117, 0xe6050075), /* PORT117CR */ + PORTCR(118, 0xe6050076), /* PORT118CR */ + + PORTCR(128, 0xe6051080), /* PORT128CR */ + PORTCR(129, 0xe6051081), /* PORT129CR */ + + PORTCR(130, 0xe6051082), /* PORT130CR */ + PORTCR(131, 0xe6051083), /* PORT131CR */ + PORTCR(132, 0xe6051084), /* PORT132CR */ + PORTCR(133, 0xe6051085), /* PORT133CR */ + PORTCR(134, 0xe6051086), /* PORT134CR */ + PORTCR(135, 0xe6051087), /* PORT135CR */ + PORTCR(136, 0xe6051088), /* PORT136CR */ + PORTCR(137, 0xe6051089), /* PORT137CR */ + PORTCR(138, 0xe605108a), /* PORT138CR */ + PORTCR(139, 0xe605108b), /* PORT139CR */ + + PORTCR(140, 0xe605108c), /* PORT140CR */ + PORTCR(141, 0xe605108d), /* PORT141CR */ + PORTCR(142, 0xe605108e), /* PORT142CR */ + PORTCR(143, 0xe605108f), /* PORT143CR */ + PORTCR(144, 0xe6051090), /* PORT144CR */ + PORTCR(145, 0xe6051091), /* PORT145CR */ + PORTCR(146, 0xe6051092), /* PORT146CR */ + PORTCR(147, 0xe6051093), /* PORT147CR */ + PORTCR(148, 0xe6051094), /* PORT148CR */ + PORTCR(149, 0xe6051095), /* PORT149CR */ + + PORTCR(150, 0xe6051096), /* PORT150CR */ + PORTCR(151, 0xe6051097), /* PORT151CR */ + PORTCR(152, 0xe6051098), /* PORT152CR */ + PORTCR(153, 0xe6051099), /* PORT153CR */ + PORTCR(154, 0xe605109a), /* PORT154CR */ + PORTCR(155, 0xe605109b), /* PORT155CR */ + PORTCR(156, 0xe605109c), /* PORT156CR */ + PORTCR(157, 0xe605109d), /* PORT157CR */ + PORTCR(158, 0xe605109e), /* PORT158CR */ + PORTCR(159, 0xe605109f), /* PORT159CR */ + + PORTCR(160, 0xe60510a0), /* PORT160CR */ + PORTCR(161, 0xe60510a1), /* PORT161CR */ + PORTCR(162, 0xe60510a2), /* PORT162CR */ + PORTCR(163, 0xe60510a3), /* PORT163CR */ + PORTCR(164, 0xe60510a4), /* PORT164CR */ + + PORTCR(192, 0xe60520c0), /* PORT192CR */ + PORTCR(193, 0xe60520c1), /* PORT193CR */ + PORTCR(194, 0xe60520c2), /* PORT194CR */ + PORTCR(195, 0xe60520c3), /* PORT195CR */ + PORTCR(196, 0xe60520c4), /* PORT196CR */ + PORTCR(197, 0xe60520c5), /* PORT197CR */ + PORTCR(198, 0xe60520c6), /* PORT198CR */ + PORTCR(199, 0xe60520c7), /* PORT199CR */ + + PORTCR(200, 0xe60520c8), /* PORT200CR */ + PORTCR(201, 0xe60520c9), /* PORT201CR */ + PORTCR(202, 0xe60520ca), /* PORT202CR */ + PORTCR(203, 0xe60520cb), /* PORT203CR */ + PORTCR(204, 0xe60520cc), /* PORT204CR */ + PORTCR(205, 0xe60520cd), /* PORT205CR */ + PORTCR(206, 0xe60520ce), /* PORT206CR */ + PORTCR(207, 0xe60520cf), /* PORT207CR */ + PORTCR(208, 0xe60520d0), /* PORT208CR */ + PORTCR(209, 0xe60520d1), /* PORT209CR */ + + PORTCR(210, 0xe60520d2), /* PORT210CR */ + PORTCR(211, 0xe60520d3), /* PORT211CR */ + PORTCR(212, 0xe60520d4), /* PORT212CR */ + PORTCR(213, 0xe60520d5), /* PORT213CR */ + PORTCR(214, 0xe60520d6), /* PORT214CR */ + PORTCR(215, 0xe60520d7), /* PORT215CR */ + PORTCR(216, 0xe60520d8), /* PORT216CR */ + PORTCR(217, 0xe60520d9), /* PORT217CR */ + PORTCR(218, 0xe60520da), /* PORT218CR */ + PORTCR(219, 0xe60520db), /* PORT219CR */ + + PORTCR(220, 0xe60520dc), /* PORT220CR */ + PORTCR(221, 0xe60520dd), /* PORT221CR */ + PORTCR(222, 0xe60520de), /* PORT222CR */ + PORTCR(223, 0xe60520df), /* PORT223CR */ + PORTCR(224, 0xe60520e0), /* PORT224CR */ + PORTCR(225, 0xe60520e1), /* PORT225CR */ + PORTCR(226, 0xe60520e2), /* PORT226CR */ + PORTCR(227, 0xe60520e3), /* PORT227CR */ + PORTCR(228, 0xe60520e4), /* PORT228CR */ + PORTCR(229, 0xe60520e5), /* PORT229CR */ + + PORTCR(230, 0xe60520e6), /* PORT230CR */ + PORTCR(231, 0xe60520e7), /* PORT231CR */ + PORTCR(232, 0xe60520e8), /* PORT232CR */ + PORTCR(233, 0xe60520e9), /* PORT233CR */ + PORTCR(234, 0xe60520ea), /* PORT234CR */ + PORTCR(235, 0xe60520eb), /* PORT235CR */ + PORTCR(236, 0xe60520ec), /* PORT236CR */ + PORTCR(237, 0xe60520ed), /* PORT237CR */ + PORTCR(238, 0xe60520ee), /* PORT238CR */ + PORTCR(239, 0xe60520ef), /* PORT239CR */ + + PORTCR(240, 0xe60520f0), /* PORT240CR */ + PORTCR(241, 0xe60520f1), /* PORT241CR */ + PORTCR(242, 0xe60520f2), /* PORT242CR */ + PORTCR(243, 0xe60520f3), /* PORT243CR */ + PORTCR(244, 0xe60520f4), /* PORT244CR */ + PORTCR(245, 0xe60520f5), /* PORT245CR */ + PORTCR(246, 0xe60520f6), /* PORT246CR */ + PORTCR(247, 0xe60520f7), /* PORT247CR */ + PORTCR(248, 0xe60520f8), /* PORT248CR */ + PORTCR(249, 0xe60520f9), /* PORT249CR */ + + PORTCR(250, 0xe60520fa), /* PORT250CR */ + PORTCR(251, 0xe60520fb), /* PORT251CR */ + PORTCR(252, 0xe60520fc), /* PORT252CR */ + PORTCR(253, 0xe60520fd), /* PORT253CR */ + PORTCR(254, 0xe60520fe), /* PORT254CR */ + PORTCR(255, 0xe60520ff), /* PORT255CR */ + PORTCR(256, 0xe6052100), /* PORT256CR */ + PORTCR(257, 0xe6052101), /* PORT257CR */ + PORTCR(258, 0xe6052102), /* PORT258CR */ + PORTCR(259, 0xe6052103), /* PORT259CR */ + + PORTCR(260, 0xe6052104), /* PORT260CR */ + PORTCR(261, 0xe6052105), /* PORT261CR */ + PORTCR(262, 0xe6052106), /* PORT262CR */ + PORTCR(263, 0xe6052107), /* PORT263CR */ + PORTCR(264, 0xe6052108), /* PORT264CR */ + + { PINMUX_CFG_REG("MSELBCR", 0xe6058024, 32, 1) { + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + MSELBCR_MSEL17_0, MSELBCR_MSEL17_1, + MSELBCR_MSEL16_0, MSELBCR_MSEL16_1, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } + }, + { }, +}; + +static struct pinmux_data_reg pinmux_data_regs[] = { + { PINMUX_DATA_REG("PORTL031_000DR", 0xe6054000, 32) { + PORT31_DATA, PORT30_DATA, PORT29_DATA, PORT28_DATA, + PORT27_DATA, PORT26_DATA, PORT25_DATA, PORT24_DATA, + PORT23_DATA, PORT22_DATA, PORT21_DATA, PORT20_DATA, + PORT19_DATA, PORT18_DATA, PORT17_DATA, PORT16_DATA, + PORT15_DATA, PORT14_DATA, PORT13_DATA, PORT12_DATA, + PORT11_DATA, PORT10_DATA, PORT9_DATA, PORT8_DATA, + PORT7_DATA, PORT6_DATA, PORT5_DATA, PORT4_DATA, + PORT3_DATA, PORT2_DATA, PORT1_DATA, PORT0_DATA } + }, + { PINMUX_DATA_REG("PORTL063_032DR", 0xe6054004, 32) { + PORT63_DATA, PORT62_DATA, PORT61_DATA, PORT60_DATA, + PORT59_DATA, PORT58_DATA, PORT57_DATA, PORT56_DATA, + PORT55_DATA, PORT54_DATA, PORT53_DATA, PORT52_DATA, + PORT51_DATA, PORT50_DATA, PORT49_DATA, PORT48_DATA, + PORT47_DATA, PORT46_DATA, PORT45_DATA, PORT44_DATA, + PORT43_DATA, PORT42_DATA, PORT41_DATA, PORT40_DATA, + PORT39_DATA, PORT38_DATA, PORT37_DATA, PORT36_DATA, + PORT35_DATA, PORT34_DATA, PORT33_DATA, PORT32_DATA } + }, + { PINMUX_DATA_REG("PORTL095_064DR", 0xe6054008, 32) { + PORT95_DATA, PORT94_DATA, PORT93_DATA, PORT92_DATA, + PORT91_DATA, PORT90_DATA, PORT89_DATA, PORT88_DATA, + PORT87_DATA, PORT86_DATA, PORT85_DATA, PORT84_DATA, + PORT83_DATA, PORT82_DATA, PORT81_DATA, PORT80_DATA, + PORT79_DATA, PORT78_DATA, PORT77_DATA, PORT76_DATA, + PORT75_DATA, PORT74_DATA, PORT73_DATA, PORT72_DATA, + PORT71_DATA, PORT70_DATA, PORT69_DATA, PORT68_DATA, + PORT67_DATA, PORT66_DATA, PORT65_DATA, PORT64_DATA } + }, + { PINMUX_DATA_REG("PORTD127_096DR", 0xe605400C, 32) { + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, PORT118_DATA, PORT117_DATA, PORT116_DATA, + PORT115_DATA, PORT114_DATA, PORT113_DATA, PORT112_DATA, + PORT111_DATA, PORT110_DATA, PORT109_DATA, PORT108_DATA, + PORT107_DATA, PORT106_DATA, PORT105_DATA, PORT104_DATA, + PORT103_DATA, PORT102_DATA, PORT101_DATA, PORT100_DATA, + PORT99_DATA, PORT98_DATA, PORT97_DATA, PORT96_DATA } + }, + { PINMUX_DATA_REG("PORTD159_128DR", 0xe6055000, 32) { + PORT159_DATA, PORT158_DATA, PORT157_DATA, PORT156_DATA, + PORT155_DATA, PORT154_DATA, PORT153_DATA, PORT152_DATA, + PORT151_DATA, PORT150_DATA, PORT149_DATA, PORT148_DATA, + PORT147_DATA, PORT146_DATA, PORT145_DATA, PORT144_DATA, + PORT143_DATA, PORT142_DATA, PORT141_DATA, PORT140_DATA, + PORT139_DATA, PORT138_DATA, PORT137_DATA, PORT136_DATA, + PORT135_DATA, PORT134_DATA, PORT133_DATA, PORT132_DATA, + PORT131_DATA, PORT130_DATA, PORT129_DATA, PORT128_DATA } + }, + { PINMUX_DATA_REG("PORTR191_160DR", 0xe6055004, 32) { + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, PORT164_DATA, + PORT163_DATA, PORT162_DATA, PORT161_DATA, PORT160_DATA } + }, + { PINMUX_DATA_REG("PORTR223_192DR", 0xe6056000, 32) { + PORT223_DATA, PORT222_DATA, PORT221_DATA, PORT220_DATA, + PORT219_DATA, PORT218_DATA, PORT217_DATA, PORT216_DATA, + PORT215_DATA, PORT214_DATA, PORT213_DATA, PORT212_DATA, + PORT211_DATA, PORT210_DATA, PORT209_DATA, PORT208_DATA, + PORT207_DATA, PORT206_DATA, PORT205_DATA, PORT204_DATA, + PORT203_DATA, PORT202_DATA, PORT201_DATA, PORT200_DATA, + PORT199_DATA, PORT198_DATA, PORT197_DATA, PORT196_DATA, + PORT195_DATA, PORT194_DATA, PORT193_DATA, PORT192_DATA } + }, + { PINMUX_DATA_REG("PORTU255_224DR", 0xe6056004, 32) { + PORT255_DATA, PORT254_DATA, PORT253_DATA, PORT252_DATA, + PORT251_DATA, PORT250_DATA, PORT249_DATA, PORT248_DATA, + PORT247_DATA, PORT246_DATA, PORT245_DATA, PORT244_DATA, + PORT243_DATA, PORT242_DATA, PORT241_DATA, PORT240_DATA, + PORT239_DATA, PORT238_DATA, PORT237_DATA, PORT236_DATA, + PORT235_DATA, PORT234_DATA, PORT233_DATA, PORT232_DATA, + PORT231_DATA, PORT230_DATA, PORT229_DATA, PORT228_DATA, + PORT227_DATA, PORT226_DATA, PORT225_DATA, PORT224_DATA } + }, + { PINMUX_DATA_REG("PORTU287_256DR", 0xe6056008, 32) { + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, PORT264_DATA, + PORT263_DATA, PORT262_DATA, PORT261_DATA, PORT260_DATA, + PORT259_DATA, PORT258_DATA, PORT257_DATA, PORT256_DATA } + }, + { }, +}; + +static struct pinmux_info sh7377_pinmux_info = { + .name = "sh7377_pfc", + .reserved_id = PINMUX_RESERVED, + .data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END }, + .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END }, + .input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END }, + .input_pd = { PINMUX_INPUT_PULLDOWN_BEGIN, PINMUX_INPUT_PULLDOWN_END }, + .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END }, + .mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END }, + .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END }, + + .first_gpio = GPIO_PORT0, + .last_gpio = GPIO_FN_RESETOUTS, + + .gpios = pinmux_gpios, + .cfg_regs = pinmux_config_regs, + .data_regs = pinmux_data_regs, + + .gpio_data = pinmux_data, + .gpio_data_size = ARRAY_SIZE(pinmux_data), +}; + +void sh7377_pinmux_init(void) +{ + register_pinmux(&sh7377_pinmux_info); +} diff --git a/arch/arm/mach-shmobile/setup-sh7367.c b/arch/arm/mach-shmobile/setup-sh7367.c new file mode 100644 index 00000000000..eca90716140 --- /dev/null +++ b/arch/arm/mach-shmobile/setup-sh7367.c @@ -0,0 +1,198 @@ +/* + * sh7367 processor support + * + * Copyright (C) 2010 Magnus Damm + * Copyright (C) 2008 Yoshihiro Shimoda + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/input.h> +#include <linux/io.h> +#include <linux/serial_sci.h> +#include <linux/sh_timer.h> +#include <mach/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +static struct plat_sci_port scif0_platform_data = { + .mapbase = 0xe6c40000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 80, 80, 80, 80 }, +}; + +static struct platform_device scif0_device = { + .name = "sh-sci", + .id = 0, + .dev = { + .platform_data = &scif0_platform_data, + }, +}; + +static struct plat_sci_port scif1_platform_data = { + .mapbase = 0xe6c50000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 81, 81, 81, 81 }, +}; + +static struct platform_device scif1_device = { + .name = "sh-sci", + .id = 1, + .dev = { + .platform_data = &scif1_platform_data, + }, +}; + +static struct plat_sci_port scif2_platform_data = { + .mapbase = 0xe6c60000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 82, 82, 82, 82 }, +}; + +static struct platform_device scif2_device = { + .name = "sh-sci", + .id = 2, + .dev = { + .platform_data = &scif2_platform_data, + }, +}; + +static struct plat_sci_port scif3_platform_data = { + .mapbase = 0xe6c70000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 83, 83, 83, 83 }, +}; + +static struct platform_device scif3_device = { + .name = "sh-sci", + .id = 3, + .dev = { + .platform_data = &scif3_platform_data, + }, +}; + +static struct plat_sci_port scif4_platform_data = { + .mapbase = 0xe6c80000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 89, 89, 89, 89 }, +}; + +static struct platform_device scif4_device = { + .name = "sh-sci", + .id = 4, + .dev = { + .platform_data = &scif4_platform_data, + }, +}; + +static struct plat_sci_port scif5_platform_data = { + .mapbase = 0xe6cb0000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 90, 90, 90, 90 }, +}; + +static struct platform_device scif5_device = { + .name = "sh-sci", + .id = 5, + .dev = { + .platform_data = &scif5_platform_data, + }, +}; + +static struct plat_sci_port scif6_platform_data = { + .mapbase = 0xe6c30000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 91, 91, 91, 91 }, +}; + +static struct platform_device scif6_device = { + .name = "sh-sci", + .id = 6, + .dev = { + .platform_data = &scif6_platform_data, + }, +}; + +static struct sh_timer_config cmt10_platform_data = { + .name = "CMT10", + .channel_offset = 0x10, + .timer_bit = 0, + .clk = "r_clk", + .clockevent_rating = 125, + .clocksource_rating = 125, +}; + +static struct resource cmt10_resources[] = { + [0] = { + .name = "CMT10", + .start = 0xe6138010, + .end = 0xe613801b, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 72, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device cmt10_device = { + .name = "sh_cmt", + .id = 10, + .dev = { + .platform_data = &cmt10_platform_data, + }, + .resource = cmt10_resources, + .num_resources = ARRAY_SIZE(cmt10_resources), +}; + +static struct platform_device *sh7367_early_devices[] __initdata = { + &scif0_device, + &scif1_device, + &scif2_device, + &scif3_device, + &scif4_device, + &scif5_device, + &scif6_device, + &cmt10_device, +}; + +void __init sh7367_add_standard_devices(void) +{ + platform_add_devices(sh7367_early_devices, + ARRAY_SIZE(sh7367_early_devices)); +} + +#define SYMSTPCR2 0xe6158048 +#define SYMSTPCR2_CMT1 (1 << 29) + +void __init sh7367_add_early_devices(void) +{ + /* enable clock to CMT1 */ + __raw_writel(__raw_readl(SYMSTPCR2) & ~SYMSTPCR2_CMT1, SYMSTPCR2); + + early_platform_add_devices(sh7367_early_devices, + ARRAY_SIZE(sh7367_early_devices)); +} diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c new file mode 100644 index 00000000000..1d1153290f5 --- /dev/null +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -0,0 +1,199 @@ +/* + * sh7372 processor support + * + * Copyright (C) 2010 Magnus Damm + * Copyright (C) 2008 Yoshihiro Shimoda + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/input.h> +#include <linux/io.h> +#include <linux/serial_sci.h> +#include <linux/sh_intc.h> +#include <linux/sh_timer.h> +#include <mach/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +static struct plat_sci_port scif0_platform_data = { + .mapbase = 0xe6c40000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 80, 80, 80, 80 }, +}; + +static struct platform_device scif0_device = { + .name = "sh-sci", + .id = 0, + .dev = { + .platform_data = &scif0_platform_data, + }, +}; + +static struct plat_sci_port scif1_platform_data = { + .mapbase = 0xe6c50000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 81, 81, 81, 81 }, +}; + +static struct platform_device scif1_device = { + .name = "sh-sci", + .id = 1, + .dev = { + .platform_data = &scif1_platform_data, + }, +}; + +static struct plat_sci_port scif2_platform_data = { + .mapbase = 0xe6c60000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 82, 82, 82, 82 }, +}; + +static struct platform_device scif2_device = { + .name = "sh-sci", + .id = 2, + .dev = { + .platform_data = &scif2_platform_data, + }, +}; + +static struct plat_sci_port scif3_platform_data = { + .mapbase = 0xe6c70000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 83, 83, 83, 83 }, +}; + +static struct platform_device scif3_device = { + .name = "sh-sci", + .id = 3, + .dev = { + .platform_data = &scif3_platform_data, + }, +}; + +static struct plat_sci_port scif4_platform_data = { + .mapbase = 0xe6c80000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 89, 89, 89, 89 }, +}; + +static struct platform_device scif4_device = { + .name = "sh-sci", + .id = 4, + .dev = { + .platform_data = &scif4_platform_data, + }, +}; + +static struct plat_sci_port scif5_platform_data = { + .mapbase = 0xe6cb0000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 90, 90, 90, 90 }, +}; + +static struct platform_device scif5_device = { + .name = "sh-sci", + .id = 5, + .dev = { + .platform_data = &scif5_platform_data, + }, +}; + +static struct plat_sci_port scif6_platform_data = { + .mapbase = 0xe6c30000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 91, 91, 91, 91 }, +}; + +static struct platform_device scif6_device = { + .name = "sh-sci", + .id = 6, + .dev = { + .platform_data = &scif6_platform_data, + }, +}; + +static struct sh_timer_config cmt10_platform_data = { + .name = "CMT10", + .channel_offset = 0x10, + .timer_bit = 0, + .clk = "r_clk", + .clockevent_rating = 125, + .clocksource_rating = 125, +}; + +static struct resource cmt10_resources[] = { + [0] = { + .name = "CMT10", + .start = 0xe6138010, + .end = 0xe613801b, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 72, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device cmt10_device = { + .name = "sh_cmt", + .id = 10, + .dev = { + .platform_data = &cmt10_platform_data, + }, + .resource = cmt10_resources, + .num_resources = ARRAY_SIZE(cmt10_resources), +}; + +static struct platform_device *sh7372_early_devices[] __initdata = { + &scif0_device, + &scif1_device, + &scif2_device, + &scif3_device, + &scif4_device, + &scif5_device, + &scif6_device, + &cmt10_device, +}; + +void __init sh7372_add_standard_devices(void) +{ + platform_add_devices(sh7372_early_devices, + ARRAY_SIZE(sh7372_early_devices)); +} + +#define SMSTPCR3 0xe615013c +#define SMSTPCR3_CMT1 (1 << 29) + +void __init sh7372_add_early_devices(void) +{ + /* enable clock to CMT1 */ + __raw_writel(__raw_readl(SMSTPCR3) & ~SMSTPCR3_CMT1, SMSTPCR3); + + early_platform_add_devices(sh7372_early_devices, + ARRAY_SIZE(sh7372_early_devices)); +} diff --git a/arch/arm/mach-shmobile/setup-sh7377.c b/arch/arm/mach-shmobile/setup-sh7377.c new file mode 100644 index 00000000000..60e37774c35 --- /dev/null +++ b/arch/arm/mach-shmobile/setup-sh7377.c @@ -0,0 +1,215 @@ +/* + * sh7377 processor support + * + * Copyright (C) 2010 Magnus Damm + * Copyright (C) 2008 Yoshihiro Shimoda + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/input.h> +#include <linux/io.h> +#include <linux/serial_sci.h> +#include <linux/sh_intc.h> +#include <linux/sh_timer.h> +#include <mach/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +static struct plat_sci_port scif0_platform_data = { + .mapbase = 0xe6c40000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 80, 80, 80, 80 }, +}; + +static struct platform_device scif0_device = { + .name = "sh-sci", + .id = 0, + .dev = { + .platform_data = &scif0_platform_data, + }, +}; + +static struct plat_sci_port scif1_platform_data = { + .mapbase = 0xe6c50000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 81, 81, 81, 81 }, +}; + +static struct platform_device scif1_device = { + .name = "sh-sci", + .id = 1, + .dev = { + .platform_data = &scif1_platform_data, + }, +}; + +static struct plat_sci_port scif2_platform_data = { + .mapbase = 0xe6c60000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 82, 82, 82, 82 }, +}; + +static struct platform_device scif2_device = { + .name = "sh-sci", + .id = 2, + .dev = { + .platform_data = &scif2_platform_data, + }, +}; + +static struct plat_sci_port scif3_platform_data = { + .mapbase = 0xe6c70000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 83, 83, 83, 83 }, +}; + +static struct platform_device scif3_device = { + .name = "sh-sci", + .id = 3, + .dev = { + .platform_data = &scif3_platform_data, + }, +}; + +static struct plat_sci_port scif4_platform_data = { + .mapbase = 0xe6c80000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 89, 89, 89, 89 }, +}; + +static struct platform_device scif4_device = { + .name = "sh-sci", + .id = 4, + .dev = { + .platform_data = &scif4_platform_data, + }, +}; + +static struct plat_sci_port scif5_platform_data = { + .mapbase = 0xe6cb0000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 90, 90, 90, 90 }, +}; + +static struct platform_device scif5_device = { + .name = "sh-sci", + .id = 5, + .dev = { + .platform_data = &scif5_platform_data, + }, +}; + +static struct plat_sci_port scif6_platform_data = { + .mapbase = 0xe6cc0000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 196, 196, 196, 196 }, +}; + +static struct platform_device scif6_device = { + .name = "sh-sci", + .id = 6, + .dev = { + .platform_data = &scif6_platform_data, + }, +}; + +static struct plat_sci_port scif7_platform_data = { + .mapbase = 0xe6c30000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 91, 91, 91, 91 }, +}; + +static struct platform_device scif7_device = { + .name = "sh-sci", + .id = 7, + .dev = { + .platform_data = &scif7_platform_data, + }, +}; + +static struct sh_timer_config cmt10_platform_data = { + .name = "CMT10", + .channel_offset = 0x10, + .timer_bit = 0, + .clk = "r_clk", + .clockevent_rating = 125, + .clocksource_rating = 125, +}; + +static struct resource cmt10_resources[] = { + [0] = { + .name = "CMT10", + .start = 0xe6138010, + .end = 0xe613801b, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 72, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device cmt10_device = { + .name = "sh_cmt", + .id = 10, + .dev = { + .platform_data = &cmt10_platform_data, + }, + .resource = cmt10_resources, + .num_resources = ARRAY_SIZE(cmt10_resources), +}; + +static struct platform_device *sh7377_early_devices[] __initdata = { + &scif0_device, + &scif1_device, + &scif2_device, + &scif3_device, + &scif4_device, + &scif5_device, + &scif6_device, + &scif7_device, + &cmt10_device, +}; + +void __init sh7377_add_standard_devices(void) +{ + platform_add_devices(sh7377_early_devices, + ARRAY_SIZE(sh7377_early_devices)); +} + +#define SMSTPCR3 0xe615013c +#define SMSTPCR3_CMT1 (1 << 29) + +void __init sh7377_add_early_devices(void) +{ + /* enable clock to CMT1 */ + __raw_writel(__raw_readl(SMSTPCR3) & ~SMSTPCR3_CMT1, SMSTPCR3); + + early_platform_add_devices(sh7377_early_devices, + ARRAY_SIZE(sh7377_early_devices)); +} diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c new file mode 100644 index 00000000000..895794b543c --- /dev/null +++ b/arch/arm/mach-shmobile/timer.c @@ -0,0 +1,46 @@ +/* + * SH-Mobile Timer + * + * Copyright (C) 2010 Magnus Damm + * Copyright (C) 2002 - 2009 Paul Mundt + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ +#include <linux/platform_device.h> +#include <asm/mach/time.h> + +static void __init shmobile_late_time_init(void) +{ + /* + * Make sure all compiled-in early timers register themselves. + * + * Run probe() for two "earlytimer" devices, these will be the + * clockevents and clocksource devices respectively. In the event + * that only a clockevents device is available, we -ENODEV on the + * clocksource and the jiffies clocksource is used transparently + * instead. No error handling is necessary here. + */ + early_platform_driver_register_all("earlytimer"); + early_platform_driver_probe("earlytimer", 2, 0); +} + +static void __init shmobile_timer_init(void) +{ + late_time_init = shmobile_late_time_init; +} + +struct sys_timer shmobile_timer = { + .init = shmobile_timer_init, +}; diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h index 6da650202dc..04ea836969b 100644 --- a/arch/arm/mach-ux500/include/mach/hardware.h +++ b/arch/arm/mach-ux500/include/mach/hardware.h @@ -68,12 +68,12 @@ #define U8500_PKAM_BASE (U8500_PER6_BASE + 0x2000) #define U8500_CRYPTO0_BASE (U8500_PER6_BASE + 0xa000) #define U8500_CRYPTO1_BASE (U8500_PER6_BASE + 0xb000) -#define U8500_CLKRST6_BASE (U8500_PER7_BASE + 0xf000) +#define U8500_CLKRST6_BASE (U8500_PER6_BASE + 0xf000) /* per5 base addressess */ #define U8500_USBOTG_BASE (U8500_PER5_BASE + 0x00000) #define U8500_GPIO5_BASE (U8500_PER5_BASE + 0x1e000) -#define U8500_CLKRST5_BASE (U8500_PER7_BASE + 0x1f000) +#define U8500_CLKRST5_BASE (U8500_PER5_BASE + 0x1f000) /* per4 base addressess */ #define U8500_BACKUPRAM0_BASE (U8500_PER4_BASE + 0x0000) @@ -95,7 +95,7 @@ #define U8500_UART2_BASE (U8500_PER3_BASE + 0x7000) #define U8500_SDI5_BASE (U8500_PER3_BASE + 0x8000) #define U8500_GPIO3_BASE (U8500_PER3_BASE + 0xe000) -#define U8500_CLKRST3_BASE (U8500_PER7_BASE + 0xf000) +#define U8500_CLKRST3_BASE (U8500_PER3_BASE + 0xf000) /* per2 base addressess */ #define U8500_I2C3_BASE (U8500_PER2_BASE + 0x0000) @@ -123,7 +123,7 @@ #define U8500_SPI3_BASE (U8500_PER1_BASE + 0x9000) #define U8500_SLIM0_BASE (U8500_PER1_BASE + 0xa000) #define U8500_GPIO1_BASE (U8500_PER1_BASE + 0xe000) -#define U8500_CLKRST1_BASE (U8500_PER2_BASE + 0xf000) +#define U8500_CLKRST1_BASE (U8500_PER1_BASE + 0xf000) /* ST-Ericsson modified pl022 id */ #define SSP_PER_ID 0x01080022 diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index 8b0a1ee039f..7f7ad6f289b 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -9,38 +9,43 @@ choice config ARCH_MX1 bool "MX1-based" select CPU_ARM920T - select COMMON_CLKDEV + select IMX_HAVE_IOMUX_V1 help This enables support for systems based on the Freescale i.MX1 family config ARCH_MX2 bool "MX2-based" select CPU_ARM926T - select COMMON_CLKDEV + select IMX_HAVE_IOMUX_V1 help This enables support for systems based on the Freescale i.MX2 family config ARCH_MX25 bool "MX25-based" select CPU_ARM926T - select COMMON_CLKDEV + select ARCH_MXC_IOMUX_V3 + select HAVE_FB_IMX help This enables support for systems based on the Freescale i.MX25 family config ARCH_MX3 bool "MX3-based" select CPU_V6 - select COMMON_CLKDEV help This enables support for systems based on the Freescale i.MX3 family config ARCH_MXC91231 bool "MXC91231-based" select CPU_V6 - select COMMON_CLKDEV help This enables support for systems based on the Freescale MXC91231 family +config ARCH_MX5 + bool "MX5-based" + select CPU_V7 + help + This enables support for systems based on the Freescale i.MX51 family + endchoice source "arch/arm/mach-mx1/Kconfig" @@ -48,12 +53,12 @@ source "arch/arm/mach-mx2/Kconfig" source "arch/arm/mach-mx3/Kconfig" source "arch/arm/mach-mx25/Kconfig" source "arch/arm/mach-mxc91231/Kconfig" +source "arch/arm/mach-mx5/Kconfig" endmenu config MXC_IRQ_PRIOR bool "Use IRQ priority" - depends on ARCH_MXC help Select this if you want to use prioritized IRQ handling. This feature prevents higher priority ISR to be interrupted @@ -62,9 +67,16 @@ config MXC_IRQ_PRIOR requirements for timing. Say N here, unless you have a specialized requirement. +config MXC_TZIC + bool "Enable TrustZone Interrupt Controller" + depends on ARCH_MX51 + help + This will be automatically selected for all processors + containing this interrupt controller. + Say N here only if you are really sure. + config MXC_PWM tristate "Enable PWM driver" - depends on ARCH_MXC select HAVE_PWM help Enable support for the i.MX PWM controller(s). @@ -74,7 +86,9 @@ config MXC_ULPI config ARCH_HAS_RNGA bool - depends on ARCH_MXC + +config IMX_HAVE_IOMUX_V1 + bool config ARCH_MXC_IOMUX_V3 bool diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile index 6cee38df58b..895bc3c5e0c 100644 --- a/arch/arm/plat-mxc/Makefile +++ b/arch/arm/plat-mxc/Makefile @@ -5,8 +5,12 @@ # Common support obj-y := irq.o clock.o gpio.o time.o devices.o cpu.o system.o -obj-$(CONFIG_ARCH_MX1) += iomux-mx1-mx2.o dma-mx1-mx2.o -obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o +# MX51 uses the TZIC interrupt controller, older platforms use AVIC (irq.o) +obj-$(CONFIG_MXC_TZIC) += tzic.o + +obj-$(CONFIG_ARCH_MX1) += dma-mx1-mx2.o +obj-$(CONFIG_ARCH_MX2) += dma-mx1-mx2.o +obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o obj-$(CONFIG_MXC_PWM) += pwm.o obj-$(CONFIG_USB_EHCI_MXC) += ehci.o diff --git a/arch/arm/plat-mxc/audmux-v1.c b/arch/arm/plat-mxc/audmux-v1.c index da6387dcdf2..b62917ca3f9 100644 --- a/arch/arm/plat-mxc/audmux-v1.c +++ b/arch/arm/plat-mxc/audmux-v1.c @@ -50,8 +50,18 @@ EXPORT_SYMBOL_GPL(mxc_audmux_v1_configure_port); static int mxc_audmux_v1_init(void) { - if (cpu_is_mx27() || cpu_is_mx21()) - audmux_base = IO_ADDRESS(AUDMUX_BASE_ADDR); +#ifdef CONFIG_MACH_MX21 + if (cpu_is_mx21()) + audmux_base = MX21_IO_ADDRESS(MX21_AUDMUX_BASE_ADDR); + else +#endif +#ifdef CONFIG_MACH_MX27 + if (cpu_is_mx27()) + audmux_base = MX27_IO_ADDRESS(MX27_AUDMUX_BASE_ADDR); + else +#endif + (void)0; + return 0; } diff --git a/arch/arm/plat-mxc/audmux-v2.c b/arch/arm/plat-mxc/audmux-v2.c index b06954a8443..d983cd6c788 100644 --- a/arch/arm/plat-mxc/audmux-v2.c +++ b/arch/arm/plat-mxc/audmux-v2.c @@ -190,7 +190,10 @@ static int mxc_audmux_v2_init(void) { int ret; - if (cpu_is_mx35()) { + if (cpu_is_mx31()) + audmux_base = MX31_IO_ADDRESS(MX31_AUDMUX_BASE_ADDR); + + else if (cpu_is_mx35()) { audmux_clk = clk_get(NULL, "audmux"); if (IS_ERR(audmux_clk)) { ret = PTR_ERR(audmux_clk); @@ -198,11 +201,9 @@ static int mxc_audmux_v2_init(void) ret); return ret; } + audmux_base = MX35_IO_ADDRESS(MX35_AUDMUX_BASE_ADDR); } - if (cpu_is_mx31() || cpu_is_mx35()) - audmux_base = IO_ADDRESS(AUDMUX_BASE_ADDR); - audmux_debugfs_init(); return 0; diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c index 9e8fbd57495..323ff8ccc87 100644 --- a/arch/arm/plat-mxc/clock.c +++ b/arch/arm/plat-mxc/clock.c @@ -56,6 +56,7 @@ static void __clk_disable(struct clk *clk) __clk_disable(clk->parent); __clk_disable(clk->secondary); + WARN_ON(!clk->usecount); if (!(--clk->usecount) && clk->disable) clk->disable(clk); } diff --git a/arch/arm/plat-mxc/dma-mx1-mx2.c b/arch/arm/plat-mxc/dma-mx1-mx2.c index 9c1b3f9c4f4..e16014b0d13 100644 --- a/arch/arm/plat-mxc/dma-mx1-mx2.c +++ b/arch/arm/plat-mxc/dma-mx1-mx2.c @@ -128,6 +128,18 @@ struct imx_dma_channel { int hw_chaining; }; +static void __iomem *imx_dmav1_baseaddr; + +static void imx_dmav1_writel(unsigned val, unsigned offset) +{ + __raw_writel(val, imx_dmav1_baseaddr + offset); +} + +static unsigned imx_dmav1_readl(unsigned offset) +{ + return __raw_readl(imx_dmav1_baseaddr + offset); +} + static struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS]; static struct clk *dma_clk; @@ -140,7 +152,6 @@ static int imx_dma_hw_chain(struct imx_dma_channel *imxdma) return 0; } - /* * imx_dma_sg_next - prepare next chunk for scatter-gather DMA emulation */ @@ -160,17 +171,17 @@ static inline int imx_dma_sg_next(int channel, struct scatterlist *sg) imxdma->resbytes -= now; if ((imxdma->dma_mode & DMA_MODE_MASK) == DMA_MODE_READ) - __raw_writel(sg->dma_address, DMA_BASE + DMA_DAR(channel)); + imx_dmav1_writel(sg->dma_address, DMA_DAR(channel)); else - __raw_writel(sg->dma_address, DMA_BASE + DMA_SAR(channel)); + imx_dmav1_writel(sg->dma_address, DMA_SAR(channel)); - __raw_writel(now, DMA_BASE + DMA_CNTR(channel)); + imx_dmav1_writel(now, DMA_CNTR(channel)); pr_debug("imxdma%d: next sg chunk dst 0x%08x, src 0x%08x, " "size 0x%08x\n", channel, - __raw_readl(DMA_BASE + DMA_DAR(channel)), - __raw_readl(DMA_BASE + DMA_SAR(channel)), - __raw_readl(DMA_BASE + DMA_CNTR(channel))); + imx_dmav1_readl(DMA_DAR(channel)), + imx_dmav1_readl(DMA_SAR(channel)), + imx_dmav1_readl(DMA_CNTR(channel))); return now; } @@ -218,27 +229,26 @@ imx_dma_setup_single(int channel, dma_addr_t dma_address, channel, __func__, (unsigned int)dma_address, dma_length, dev_addr); - __raw_writel(dev_addr, DMA_BASE + DMA_SAR(channel)); - __raw_writel(dma_address, DMA_BASE + DMA_DAR(channel)); - __raw_writel(imxdma->ccr_from_device, - DMA_BASE + DMA_CCR(channel)); + imx_dmav1_writel(dev_addr, DMA_SAR(channel)); + imx_dmav1_writel(dma_address, DMA_DAR(channel)); + imx_dmav1_writel(imxdma->ccr_from_device, DMA_CCR(channel)); } else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) { pr_debug("imxdma%d: %s dma_addressg=0x%08x dma_length=%d " "dev_addr=0x%08x for write\n", channel, __func__, (unsigned int)dma_address, dma_length, dev_addr); - __raw_writel(dma_address, DMA_BASE + DMA_SAR(channel)); - __raw_writel(dev_addr, DMA_BASE + DMA_DAR(channel)); - __raw_writel(imxdma->ccr_to_device, - DMA_BASE + DMA_CCR(channel)); + imx_dmav1_writel(dma_address, DMA_SAR(channel)); + imx_dmav1_writel(dev_addr, DMA_DAR(channel)); + imx_dmav1_writel(imxdma->ccr_to_device, + DMA_CCR(channel)); } else { printk(KERN_ERR "imxdma%d: imx_dma_setup_single bad dmamode\n", channel); return -EINVAL; } - __raw_writel(dma_length, DMA_BASE + DMA_CNTR(channel)); + imx_dmav1_writel(dma_length, DMA_CNTR(channel)); return 0; } @@ -316,17 +326,15 @@ imx_dma_setup_sg(int channel, "dev_addr=0x%08x for read\n", channel, __func__, sg, sgcount, dma_length, dev_addr); - __raw_writel(dev_addr, DMA_BASE + DMA_SAR(channel)); - __raw_writel(imxdma->ccr_from_device, - DMA_BASE + DMA_CCR(channel)); + imx_dmav1_writel(dev_addr, DMA_SAR(channel)); + imx_dmav1_writel(imxdma->ccr_from_device, DMA_CCR(channel)); } else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) { pr_debug("imxdma%d: %s sg=%p sgcount=%d total length=%d " "dev_addr=0x%08x for write\n", channel, __func__, sg, sgcount, dma_length, dev_addr); - __raw_writel(dev_addr, DMA_BASE + DMA_DAR(channel)); - __raw_writel(imxdma->ccr_to_device, - DMA_BASE + DMA_CCR(channel)); + imx_dmav1_writel(dev_addr, DMA_DAR(channel)); + imx_dmav1_writel(imxdma->ccr_to_device, DMA_CCR(channel)); } else { printk(KERN_ERR "imxdma%d: imx_dma_setup_sg bad dmamode\n", channel); @@ -360,7 +368,7 @@ imx_dma_config_channel(int channel, unsigned int config_port, imxdma->ccr_from_device = config_port | (config_mem << 2) | dreq; imxdma->ccr_to_device = config_mem | (config_port << 2) | dreq; - __raw_writel(dmareq, DMA_BASE + DMA_RSSR(channel)); + imx_dmav1_writel(dmareq, DMA_RSSR(channel)); return 0; } @@ -368,7 +376,7 @@ EXPORT_SYMBOL(imx_dma_config_channel); void imx_dma_config_burstlen(int channel, unsigned int burstlen) { - __raw_writel(burstlen, DMA_BASE + DMA_BLR(channel)); + imx_dmav1_writel(burstlen, DMA_BLR(channel)); } EXPORT_SYMBOL(imx_dma_config_burstlen); @@ -398,7 +406,7 @@ imx_dma_setup_handlers(int channel, } local_irq_save(flags); - __raw_writel(1 << channel, DMA_BASE + DMA_DISR); + imx_dmav1_writel(1 << channel, DMA_DISR); imxdma->irq_handler = irq_handler; imxdma->err_handler = err_handler; imxdma->data = data; @@ -462,22 +470,21 @@ void imx_dma_enable(int channel) local_irq_save(flags); - __raw_writel(1 << channel, DMA_BASE + DMA_DISR); - __raw_writel(__raw_readl(DMA_BASE + DMA_DIMR) & ~(1 << channel), - DMA_BASE + DMA_DIMR); - __raw_writel(__raw_readl(DMA_BASE + DMA_CCR(channel)) | CCR_CEN | - CCR_ACRPT, - DMA_BASE + DMA_CCR(channel)); + imx_dmav1_writel(1 << channel, DMA_DISR); + imx_dmav1_writel(imx_dmav1_readl(DMA_DIMR) & ~(1 << channel), DMA_DIMR); + imx_dmav1_writel(imx_dmav1_readl(DMA_CCR(channel)) | CCR_CEN | + CCR_ACRPT, DMA_CCR(channel)); #ifdef CONFIG_ARCH_MX2 - if (imxdma->sg && imx_dma_hw_chain(imxdma)) { + if ((cpu_is_mx21() || cpu_is_mx27()) && + imxdma->sg && imx_dma_hw_chain(imxdma)) { imxdma->sg = sg_next(imxdma->sg); if (imxdma->sg) { u32 tmp; imx_dma_sg_next(channel, imxdma->sg); - tmp = __raw_readl(DMA_BASE + DMA_CCR(channel)); - __raw_writel(tmp | CCR_RPT | CCR_ACRPT, - DMA_BASE + DMA_CCR(channel)); + tmp = imx_dmav1_readl(DMA_CCR(channel)); + imx_dmav1_writel(tmp | CCR_RPT | CCR_ACRPT, + DMA_CCR(channel)); } } #endif @@ -502,11 +509,10 @@ void imx_dma_disable(int channel) del_timer(&imxdma->watchdog); local_irq_save(flags); - __raw_writel(__raw_readl(DMA_BASE + DMA_DIMR) | (1 << channel), - DMA_BASE + DMA_DIMR); - __raw_writel(__raw_readl(DMA_BASE + DMA_CCR(channel)) & ~CCR_CEN, - DMA_BASE + DMA_CCR(channel)); - __raw_writel(1 << channel, DMA_BASE + DMA_DISR); + imx_dmav1_writel(imx_dmav1_readl(DMA_DIMR) | (1 << channel), DMA_DIMR); + imx_dmav1_writel(imx_dmav1_readl(DMA_CCR(channel)) & ~CCR_CEN, + DMA_CCR(channel)); + imx_dmav1_writel(1 << channel, DMA_DISR); imxdma->in_use = 0; local_irq_restore(flags); } @@ -517,7 +523,7 @@ static void imx_dma_watchdog(unsigned long chno) { struct imx_dma_channel *imxdma = &imx_dma_channels[chno]; - __raw_writel(0, DMA_BASE + DMA_CCR(chno)); + imx_dmav1_writel(0, DMA_CCR(chno)); imxdma->in_use = 0; imxdma->sg = NULL; @@ -533,17 +539,17 @@ static irqreturn_t dma_err_handler(int irq, void *dev_id) unsigned int err_mask; int errcode; - disr = __raw_readl(DMA_BASE + DMA_DISR); + disr = imx_dmav1_readl(DMA_DISR); - err_mask = __raw_readl(DMA_BASE + DMA_DBTOSR) | - __raw_readl(DMA_BASE + DMA_DRTOSR) | - __raw_readl(DMA_BASE + DMA_DSESR) | - __raw_readl(DMA_BASE + DMA_DBOSR); + err_mask = imx_dmav1_readl(DMA_DBTOSR) | + imx_dmav1_readl(DMA_DRTOSR) | + imx_dmav1_readl(DMA_DSESR) | + imx_dmav1_readl(DMA_DBOSR); if (!err_mask) return IRQ_HANDLED; - __raw_writel(disr & err_mask, DMA_BASE + DMA_DISR); + imx_dmav1_writel(disr & err_mask, DMA_DISR); for (i = 0; i < IMX_DMA_CHANNELS; i++) { if (!(err_mask & (1 << i))) @@ -551,20 +557,20 @@ static irqreturn_t dma_err_handler(int irq, void *dev_id) imxdma = &imx_dma_channels[i]; errcode = 0; - if (__raw_readl(DMA_BASE + DMA_DBTOSR) & (1 << i)) { - __raw_writel(1 << i, DMA_BASE + DMA_DBTOSR); + if (imx_dmav1_readl(DMA_DBTOSR) & (1 << i)) { + imx_dmav1_writel(1 << i, DMA_DBTOSR); errcode |= IMX_DMA_ERR_BURST; } - if (__raw_readl(DMA_BASE + DMA_DRTOSR) & (1 << i)) { - __raw_writel(1 << i, DMA_BASE + DMA_DRTOSR); + if (imx_dmav1_readl(DMA_DRTOSR) & (1 << i)) { + imx_dmav1_writel(1 << i, DMA_DRTOSR); errcode |= IMX_DMA_ERR_REQUEST; } - if (__raw_readl(DMA_BASE + DMA_DSESR) & (1 << i)) { - __raw_writel(1 << i, DMA_BASE + DMA_DSESR); + if (imx_dmav1_readl(DMA_DSESR) & (1 << i)) { + imx_dmav1_writel(1 << i, DMA_DSESR); errcode |= IMX_DMA_ERR_TRANSFER; } - if (__raw_readl(DMA_BASE + DMA_DBOSR) & (1 << i)) { - __raw_writel(1 << i, DMA_BASE + DMA_DBOSR); + if (imx_dmav1_readl(DMA_DBOSR) & (1 << i)) { + imx_dmav1_writel(1 << i, DMA_DBOSR); errcode |= IMX_DMA_ERR_BUFFER; } if (imxdma->name && imxdma->err_handler) { @@ -607,7 +613,7 @@ static void dma_irq_handle_channel(int chno) if (imxdma->sg) { imx_dma_sg_next(chno, imxdma->sg); - tmp = __raw_readl(DMA_BASE + DMA_CCR(chno)); + tmp = imx_dmav1_readl(DMA_CCR(chno)); if (imx_dma_hw_chain(imxdma)) { /* FIXME: The timeout should probably be @@ -617,15 +623,13 @@ static void dma_irq_handle_channel(int chno) jiffies + msecs_to_jiffies(500)); tmp |= CCR_CEN | CCR_RPT | CCR_ACRPT; - __raw_writel(tmp, DMA_BASE + - DMA_CCR(chno)); + imx_dmav1_writel(tmp, DMA_CCR(chno)); } else { - __raw_writel(tmp & ~CCR_CEN, DMA_BASE + - DMA_CCR(chno)); + imx_dmav1_writel(tmp & ~CCR_CEN, DMA_CCR(chno)); tmp |= CCR_CEN; } - __raw_writel(tmp, DMA_BASE + DMA_CCR(chno)); + imx_dmav1_writel(tmp, DMA_CCR(chno)); if (imxdma->prog_handler) imxdma->prog_handler(chno, imxdma->data, @@ -640,7 +644,7 @@ static void dma_irq_handle_channel(int chno) } } - __raw_writel(0, DMA_BASE + DMA_CCR(chno)); + imx_dmav1_writel(0, DMA_CCR(chno)); imxdma->in_use = 0; if (imxdma->irq_handler) imxdma->irq_handler(chno, imxdma->data); @@ -651,15 +655,16 @@ static irqreturn_t dma_irq_handler(int irq, void *dev_id) int i, disr; #ifdef CONFIG_ARCH_MX2 - dma_err_handler(irq, dev_id); + if (cpu_is_mx21() || cpu_is_mx27()) + dma_err_handler(irq, dev_id); #endif - disr = __raw_readl(DMA_BASE + DMA_DISR); + disr = imx_dmav1_readl(DMA_DISR); pr_debug("imxdma: dma_irq_handler called, disr=0x%08x\n", disr); - __raw_writel(disr, DMA_BASE + DMA_DISR); + imx_dmav1_writel(disr, DMA_DISR); for (i = 0; i < IMX_DMA_CHANNELS; i++) { if (disr & (1 << i)) dma_irq_handle_channel(i); @@ -699,17 +704,19 @@ int imx_dma_request(int channel, const char *name) local_irq_restore(flags); /* request_irq() can block */ #ifdef CONFIG_ARCH_MX2 - ret = request_irq(MXC_INT_DMACH0 + channel, dma_irq_handler, 0, "DMA", - NULL); - if (ret) { - imxdma->name = NULL; - printk(KERN_CRIT "Can't register IRQ %d for DMA channel %d\n", - MXC_INT_DMACH0 + channel, channel); - return ret; + if (cpu_is_mx21() || cpu_is_mx27()) { + ret = request_irq(MX2x_INT_DMACH0 + channel, + dma_irq_handler, 0, "DMA", NULL); + if (ret) { + imxdma->name = NULL; + pr_crit("Can't register IRQ %d for DMA channel %d\n", + MX2x_INT_DMACH0 + channel, channel); + return ret; + } + init_timer(&imxdma->watchdog); + imxdma->watchdog.function = &imx_dma_watchdog; + imxdma->watchdog.data = channel; } - init_timer(&imxdma->watchdog); - imxdma->watchdog.function = &imx_dma_watchdog; - imxdma->watchdog.data = channel; #endif return ret; @@ -738,7 +745,8 @@ void imx_dma_free(int channel) imxdma->name = NULL; #ifdef CONFIG_ARCH_MX2 - free_irq(MXC_INT_DMACH0 + channel, NULL); + if (cpu_is_mx21() || cpu_is_mx27()) + free_irq(MX2x_INT_DMACH0 + channel, NULL); #endif local_irq_restore(flags); @@ -796,34 +804,53 @@ static int __init imx_dma_init(void) int ret = 0; int i; +#ifdef CONFIG_ARCH_MX1 + if (cpu_is_mx1()) + imx_dmav1_baseaddr = MX1_IO_ADDRESS(MX1_DMA_BASE_ADDR); + else +#endif +#ifdef CONFIG_MACH_MX21 + if (cpu_is_mx21()) + imx_dmav1_baseaddr = MX21_IO_ADDRESS(MX21_DMA_BASE_ADDR); + else +#endif +#ifdef CONFIG_MACH_MX27 + if (cpu_is_mx27()) + imx_dmav1_baseaddr = MX27_IO_ADDRESS(MX27_DMA_BASE_ADDR); + else +#endif + BUG(); + dma_clk = clk_get(NULL, "dma"); clk_enable(dma_clk); /* reset DMA module */ - __raw_writel(DCR_DRST, DMA_BASE + DMA_DCR); + imx_dmav1_writel(DCR_DRST, DMA_DCR); #ifdef CONFIG_ARCH_MX1 - ret = request_irq(DMA_INT, dma_irq_handler, 0, "DMA", NULL); - if (ret) { - printk(KERN_CRIT "Wow! Can't register IRQ for DMA\n"); - return ret; - } + if (cpu_is_mx1()) { + ret = request_irq(MX1_DMA_INT, dma_irq_handler, 0, "DMA", NULL); + if (ret) { + pr_crit("Wow! Can't register IRQ for DMA\n"); + return ret; + } - ret = request_irq(DMA_ERR, dma_err_handler, 0, "DMA", NULL); - if (ret) { - printk(KERN_CRIT "Wow! Can't register ERRIRQ for DMA\n"); - free_irq(DMA_INT, NULL); - return ret; + ret = request_irq(MX1_DMA_ERR, dma_err_handler, 0, "DMA", NULL); + if (ret) { + pr_crit("Wow! Can't register ERRIRQ for DMA\n"); + free_irq(MX1_DMA_INT, NULL); + return ret; + } } #endif /* enable DMA module */ - __raw_writel(DCR_DEN, DMA_BASE + DMA_DCR); + imx_dmav1_writel(DCR_DEN, DMA_DCR); /* clear all interrupts */ - __raw_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_BASE + DMA_DISR); + imx_dmav1_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_DISR); /* disable interrupts */ - __raw_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_BASE + DMA_DIMR); + imx_dmav1_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_DIMR); for (i = 0; i < IMX_DMA_CHANNELS; i++) { imx_dma_channels[i].sg = NULL; diff --git a/arch/arm/plat-mxc/ehci.c b/arch/arm/plat-mxc/ehci.c index 41599be882e..cb0b6387448 100644 --- a/arch/arm/plat-mxc/ehci.c +++ b/arch/arm/plat-mxc/ehci.c @@ -25,25 +25,37 @@ #define USBCTRL_OTGBASE_OFFSET 0x600 #define MX31_OTG_SIC_SHIFT 29 -#define MX31_OTG_SIC_MASK (0xf << MX31_OTG_SIC_SHIFT) +#define MX31_OTG_SIC_MASK (0x3 << MX31_OTG_SIC_SHIFT) #define MX31_OTG_PM_BIT (1 << 24) #define MX31_H2_SIC_SHIFT 21 -#define MX31_H2_SIC_MASK (0xf << MX31_H2_SIC_SHIFT) +#define MX31_H2_SIC_MASK (0x3 << MX31_H2_SIC_SHIFT) #define MX31_H2_PM_BIT (1 << 16) #define MX31_H2_DT_BIT (1 << 5) #define MX31_H1_SIC_SHIFT 13 -#define MX31_H1_SIC_MASK (0xf << MX31_H1_SIC_SHIFT) +#define MX31_H1_SIC_MASK (0x3 << MX31_H1_SIC_SHIFT) #define MX31_H1_PM_BIT (1 << 8) #define MX31_H1_DT_BIT (1 << 4) +#define MX35_OTG_SIC_SHIFT 29 +#define MX35_OTG_SIC_MASK (0x3 << MX35_OTG_SIC_SHIFT) +#define MX35_OTG_PM_BIT (1 << 24) + +#define MX35_H1_SIC_SHIFT 21 +#define MX35_H1_SIC_MASK (0x3 << MX35_H1_SIC_SHIFT) +#define MX35_H1_PM_BIT (1 << 8) +#define MX35_H1_IPPUE_UP_BIT (1 << 7) +#define MX35_H1_IPPUE_DOWN_BIT (1 << 6) +#define MX35_H1_TLL_BIT (1 << 5) +#define MX35_H1_USBTE_BIT (1 << 4) + int mxc_set_usbcontrol(int port, unsigned int flags) { unsigned int v; - +#ifdef CONFIG_ARCH_MX3 if (cpu_is_mx31()) { - v = readl(IO_ADDRESS(MX31_OTG_BASE_ADDR + + v = readl(MX31_IO_ADDRESS(MX31_OTG_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); switch (port) { @@ -51,15 +63,15 @@ int mxc_set_usbcontrol(int port, unsigned int flags) v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT); v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_OTG_SIC_SHIFT; - if (flags & MXC_EHCI_POWER_PINS_ENABLED) + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) v |= MX31_OTG_PM_BIT; break; case 1: /* H1 port */ - v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT); + v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT); v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_H1_SIC_SHIFT; - if (flags & MXC_EHCI_POWER_PINS_ENABLED) + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) v |= MX31_H1_PM_BIT; if (!(flags & MXC_EHCI_TTL_ENABLED)) @@ -67,7 +79,7 @@ int mxc_set_usbcontrol(int port, unsigned int flags) break; case 2: /* H2 port */ - v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT); + v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT); v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_H2_SIC_SHIFT; if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) @@ -77,13 +89,103 @@ int mxc_set_usbcontrol(int port, unsigned int flags) v |= MX31_H2_DT_BIT; break; + default: + return -EINVAL; } - writel(v, IO_ADDRESS(MX31_OTG_BASE_ADDR + + writel(v, MX31_IO_ADDRESS(MX31_OTG_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); return 0; } + if (cpu_is_mx35()) { + v = readl(MX35_IO_ADDRESS(MX35_OTG_BASE_ADDR + + USBCTRL_OTGBASE_OFFSET)); + + switch (port) { + case 0: /* OTG port */ + v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) + << MX35_OTG_SIC_SHIFT; + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX35_OTG_PM_BIT; + + break; + case 1: /* H1 port */ + v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_TLL_BIT | + MX35_H1_USBTE_BIT | MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) + << MX35_H1_SIC_SHIFT; + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX35_H1_PM_BIT; + + if (!(flags & MXC_EHCI_TTL_ENABLED)) + v |= MX35_H1_TLL_BIT; + + if (flags & MXC_EHCI_INTERNAL_PHY) + v |= MX35_H1_USBTE_BIT; + + if (flags & MXC_EHCI_IPPUE_DOWN) + v |= MX35_H1_IPPUE_DOWN_BIT; + + if (flags & MXC_EHCI_IPPUE_UP) + v |= MX35_H1_IPPUE_UP_BIT; + + break; + default: + return -EINVAL; + } + + writel(v, MX35_IO_ADDRESS(MX35_OTG_BASE_ADDR + + USBCTRL_OTGBASE_OFFSET)); + return 0; + } +#endif /* CONFIG_ARCH_MX3 */ +#ifdef CONFIG_MACH_MX27 + if (cpu_is_mx27()) { + /* On i.MX27 we can use the i.MX31 USBCTRL bits, they + * are identical + */ + v = readl(MX27_IO_ADDRESS(MX27_OTG_BASE_ADDR + + USBCTRL_OTGBASE_OFFSET)); + switch (port) { + case 0: /* OTG port */ + v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) + << MX31_OTG_SIC_SHIFT; + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX31_OTG_PM_BIT; + break; + case 1: /* H1 port */ + v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) + << MX31_H1_SIC_SHIFT; + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX31_H1_PM_BIT; + + if (!(flags & MXC_EHCI_TTL_ENABLED)) + v |= MX31_H1_DT_BIT; + + break; + case 2: /* H2 port */ + v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) + << MX31_H2_SIC_SHIFT; + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX31_H2_PM_BIT; + + if (!(flags & MXC_EHCI_TTL_ENABLED)) + v |= MX31_H2_DT_BIT; + + break; + default: + return -EINVAL; + } + writel(v, MX27_IO_ADDRESS(MX27_OTG_BASE_ADDR + + USBCTRL_OTGBASE_OFFSET)); + return 0; + } +#endif /* CONFIG_MACH_MX27 */ printk(KERN_WARNING "%s() unable to setup USBCONTROL for this CPU\n", __func__); return -EINVAL; diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c index d65ebe303b9..70b23893f09 100644 --- a/arch/arm/plat-mxc/gpio.c +++ b/arch/arm/plat-mxc/gpio.c @@ -140,16 +140,13 @@ static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio) val = __raw_readl(reg); edge = (val >> (bit << 1)) & 3; val &= ~(0x3 << (bit << 1)); - switch (edge) { - case GPIO_INT_HIGH_LEV: + if (edge == GPIO_INT_HIGH_LEV) { edge = GPIO_INT_LOW_LEV; pr_debug("mxc: switch GPIO %d to low trigger\n", gpio); - break; - case GPIO_INT_LOW_LEV: + } else if (edge == GPIO_INT_LOW_LEV) { edge = GPIO_INT_HIGH_LEV; pr_debug("mxc: switch GPIO %d to high trigger\n", gpio); - break; - default: + } else { pr_err("mxc: invalid configuration for GPIO %d: %x\n", gpio, edge); return; @@ -157,25 +154,20 @@ static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio) __raw_writel(val | (edge << (bit << 1)), reg); } -/* handle n interrupts in one status register */ +/* handle 32 interrupts in one status register */ static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat) { - u32 gpio_irq_no; + u32 gpio_irq_no_base = port->virtual_irq_start; - gpio_irq_no = port->virtual_irq_start; - for (; irq_stat != 0; irq_stat >>= 1, gpio_irq_no++) { - u32 gpio = irq_to_gpio(gpio_irq_no); - - if ((irq_stat & 1) == 0) - continue; + while (irq_stat != 0) { + int irqoffset = fls(irq_stat) - 1; - BUG_ON(!(irq_desc[gpio_irq_no].handle_irq)); + if (port->both_edges & (1 << irqoffset)) + mxc_flip_edge(port, irqoffset); - if (port->both_edges & (1 << (gpio & 31))) - mxc_flip_edge(port, gpio); + generic_handle_irq(gpio_irq_no_base + irqoffset); - irq_desc[gpio_irq_no].handle_irq(gpio_irq_no, - &irq_desc[gpio_irq_no]); + irq_stat &= ~(1 << irqoffset); } } diff --git a/arch/arm/plat-mxc/include/mach/board-kzmarm11.h b/arch/arm/plat-mxc/include/mach/board-kzmarm11.h index 05ff2f31ef1..93cc66f104c 100644 --- a/arch/arm/plat-mxc/include/mach/board-kzmarm11.h +++ b/arch/arm/plat-mxc/include/mach/board-kzmarm11.h @@ -21,19 +21,19 @@ /* * KZM-ARM11-01 Board Control Registers on FPGA */ -#define KZM_ARM11_CTL1 (CS4_BASE_ADDR + 0x1000) -#define KZM_ARM11_CTL2 (CS4_BASE_ADDR + 0x1001) -#define KZM_ARM11_RSW1 (CS4_BASE_ADDR + 0x1002) -#define KZM_ARM11_BACK_LIGHT (CS4_BASE_ADDR + 0x1004) -#define KZM_ARM11_FPGA_REV (CS4_BASE_ADDR + 0x1008) -#define KZM_ARM11_7SEG_LED (CS4_BASE_ADDR + 0x1010) -#define KZM_ARM11_LEDS (CS4_BASE_ADDR + 0x1020) -#define KZM_ARM11_DIPSW2 (CS4_BASE_ADDR + 0x1003) +#define KZM_ARM11_CTL1 (MX31_CS4_BASE_ADDR + 0x1000) +#define KZM_ARM11_CTL2 (MX31_CS4_BASE_ADDR + 0x1001) +#define KZM_ARM11_RSW1 (MX31_CS4_BASE_ADDR + 0x1002) +#define KZM_ARM11_BACK_LIGHT (MX31_CS4_BASE_ADDR + 0x1004) +#define KZM_ARM11_FPGA_REV (MX31_CS4_BASE_ADDR + 0x1008) +#define KZM_ARM11_7SEG_LED (MX31_CS4_BASE_ADDR + 0x1010) +#define KZM_ARM11_LEDS (MX31_CS4_BASE_ADDR + 0x1020) +#define KZM_ARM11_DIPSW2 (MX31_CS4_BASE_ADDR + 0x1003) /* * External UART for touch panel on FPGA */ -#define KZM_ARM11_16550 (CS4_BASE_ADDR + 0x1050) +#define KZM_ARM11_16550 (MX31_CS4_BASE_ADDR + 0x1050) #endif /* __ARM_ARCH_BOARD_KZM_ARM11_H */ diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h index 2cbfa35e82f..095a199591c 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx31ads.h +++ b/arch/arm/plat-mxc/include/mach/board-mx31ads.h @@ -14,7 +14,7 @@ #include <mach/hardware.h> /* Base address of PBC controller */ -#define PBC_BASE_ADDRESS IO_ADDRESS(CS4_BASE_ADDR) +#define PBC_BASE_ADDRESS MX31_CS4_BASE_ADDR_VIRT /* Offsets for the PBC Controller register */ /* PBC Board status register offset */ diff --git a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h index d5be6b5a6ac..fc5fec9b55f 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h +++ b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h @@ -25,6 +25,7 @@ enum mx31moboard_boards { MX31NOBOARD = 0, MX31DEVBOARD = 1, MX31MARXBOT = 2, + MX31SMARTBOT = 3, }; /* @@ -34,6 +35,7 @@ enum mx31moboard_boards { extern void mx31moboard_devboard_init(void); extern void mx31moboard_marxbot_init(void); +extern void mx31moboard_smartbot_init(void); #endif diff --git a/arch/arm/plat-mxc/include/mach/clock.h b/arch/arm/plat-mxc/include/mach/clock.h index 43a82d0c534..753a5988d85 100644 --- a/arch/arm/plat-mxc/include/mach/clock.h +++ b/arch/arm/plat-mxc/include/mach/clock.h @@ -26,13 +26,6 @@ struct module; struct clk { -#ifndef CONFIG_COMMON_CLKDEV - /* As soon as i.MX1 and i.MX31 switched to clkdev, this - * block can go away */ - struct list_head node; - struct module *owner; - const char *name; -#endif int id; /* Source clock this clk depends on */ struct clk *parent; diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index 4bf1068ffad..2941472582d 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -20,14 +20,17 @@ extern void mx25_map_io(void); extern void mx27_map_io(void); extern void mx31_map_io(void); extern void mx35_map_io(void); +extern void mx51_map_io(void); extern void mxc91231_map_io(void); extern void mxc_init_irq(void __iomem *); +extern void tzic_init_irq(void __iomem *); extern void mx1_init_irq(void); extern void mx21_init_irq(void); extern void mx25_init_irq(void); extern void mx27_init_irq(void); extern void mx31_init_irq(void); extern void mx35_init_irq(void); +extern void mx51_init_irq(void); extern void mxc91231_init_irq(void); extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int); extern int mx1_clocks_init(unsigned long fref); @@ -36,6 +39,8 @@ extern int mx25_clocks_init(void); extern int mx27_clocks_init(unsigned long fref); extern int mx31_clocks_init(unsigned long fref); extern int mx35_clocks_init(void); +extern int mx51_clocks_init(unsigned long ckil, unsigned long osc, + unsigned long ckih1, unsigned long ckih2); extern int mxc91231_clocks_init(unsigned long fref); extern int mxc_register_gpios(void); extern int mxc_register_device(struct platform_device *pdev, void *data); diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S index 5a6ae1b9e1e..0b6e11eaeb8 100644 --- a/arch/arm/plat-mxc/include/mach/debug-macro.S +++ b/arch/arm/plat-mxc/include/mach/debug-macro.S @@ -10,6 +10,7 @@ * published by the Free Software Foundation. * */ +#define IMX_NEEDS_DEPRECATED_SYMBOLS #ifdef CONFIG_ARCH_MX1 #include <mach/mx1.h> @@ -44,13 +45,22 @@ #define UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) #endif +#ifdef CONFIG_ARCH_MX5 +#ifdef UART_PADDR +#error "CONFIG_DEBUG_LL is incompatible with multiple archs" +#endif +#include <mach/mx51.h> +#define UART_PADDR MX51_UART1_BASE_ADDR +#define UART_VADDR MX51_AIPS1_IO_ADDRESS(MX51_UART1_BASE_ADDR) +#endif + #ifdef CONFIG_ARCH_MXC91231 #ifdef UART_PADDR #error "CONFIG_DEBUG_LL is incompatible with multiple archs" #endif #include <mach/mxc91231.h> #define UART_PADDR MXC91231_UART2_BASE_ADDR -#define UART_VADDR MXC91231_AIPS1_IO_ADDRESS(MXC91231_UART2_BASE_ADDR) +#define UART_VADDR MXC91231_IO_ADDRESS(MXC91231_UART2_BASE_ADDR) #endif .macro addruart, rx, tmp mrc p15, 0, \rx, c1, c0 diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S index 7cf290efe76..aeb08697726 100644 --- a/arch/arm/plat-mxc/include/mach/entry-macro.S +++ b/arch/arm/plat-mxc/include/mach/entry-macro.S @@ -1,6 +1,6 @@ /* * Copyright (C) 2007 Lennert Buytenhek <buytenh@wantstofly.org> - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved. */ /* @@ -18,11 +18,16 @@ .endm .macro get_irqnr_preamble, base, tmp +#ifndef CONFIG_MXC_TZIC ldr \base, =avic_base ldr \base, [\base] #ifdef CONFIG_MXC_IRQ_PRIOR ldr r4, [\base, #AVIC_NIMASK] #endif +#elif defined CONFIG_MXC_TZIC + ldr \base, =tzic_base + ldr \base, [\base] +#endif /* CONFIG_MXC_TZIC */ .endm .macro arch_ret_to_user, tmp1, tmp2 @@ -32,6 +37,7 @@ @ and returns its number in irqnr @ and returns if an interrupt occured in irqstat .macro get_irqnr_and_base, irqnr, irqstat, base, tmp +#ifndef CONFIG_MXC_TZIC @ Load offset & priority of the highest priority @ interrupt pending from AVIC_NIVECSR ldr \irqstat, [\base, #0x40] @@ -45,6 +51,32 @@ strne \tmp, [\base, #AVIC_NIMASK] streq r4, [\base, #AVIC_NIMASK] #endif +#elif defined CONFIG_MXC_TZIC + @ Load offset & priority of the highest priority + @ interrupt pending. + @ 0xD80 is HIPND0 register + mov \irqnr, #0 + mov \irqstat, #0x0D80 +1000: + ldr \tmp, [\irqstat, \base] + cmp \tmp, #0 + bne 1001f + addeq \irqnr, \irqnr, #32 + addeq \irqstat, \irqstat, #4 + cmp \irqnr, #128 + blo 1000b + b 2001f +1001: mov \irqstat, #1 +1002: tst \tmp, \irqstat + bne 2002f + movs \tmp, \tmp, lsr #1 + addne \irqnr, \irqnr, #1 + bne 1002b +2001: + mov \irqnr, #0 +2002: + movs \irqnr, \irqnr +#endif .endm @ irq priority table (not used) diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h index 78db75475f6..ebadf4ac43f 100644 --- a/arch/arm/plat-mxc/include/mach/hardware.h +++ b/arch/arm/plat-mxc/include/mach/hardware.h @@ -22,6 +22,15 @@ #include <asm/sizes.h> +#define IMX_IO_ADDRESS(addr, module) \ + ((void __force __iomem *) \ + (((unsigned long)((addr) - (module ## _BASE_ADDR)) < module ## _SIZE) ?\ + (addr) - (module ## _BASE_ADDR) + (module ## _BASE_ADDR_VIRT) : 0)) + +#ifdef CONFIG_ARCH_MX5 +#include <mach/mx51.h> +#endif + #ifdef CONFIG_ARCH_MX3 #include <mach/mx3x.h> #include <mach/mx31.h> diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx1.h b/arch/arm/plat-mxc/include/mach/iomux-mx1.h index bf23305c19c..6b1507cf378 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx1.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx1.h @@ -1,166 +1,155 @@ /* -* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License -* as published by the Free Software Foundation; either version 2 -* of the License, or (at your option) any later version. -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program; if not, write to the Free Software -* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, -* MA 02110-1301, USA. -*/ + * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ +#ifndef __MACH_IOMUX_MX1_H__ +#define __MACH_IOMUX_MX1_H__ -#ifndef _MXC_IOMUX_MX1_H -#define _MXC_IOMUX_MX1_H +#include <mach/iomux-v1.h> -#ifndef GPIO_PORTA -#error Please include mach/iomux.h -#endif +#define PA0_AIN_SPI2_CLK (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0) +#define PA0_AF_ETMTRACESYNC (GPIO_PORTA | GPIO_AF | 0) +#define PA1_AOUT_SPI2_RXD (GPIO_PORTA | GPIO_AOUT | GPIO_IN | 1) +#define PA1_PF_TIN (GPIO_PORTA | GPIO_PF | 1) +#define PA2_PF_PWM0 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 2) +#define PA3_PF_CSI_MCLK (GPIO_PORTA | GPIO_PF | 3) +#define PA4_PF_CSI_D0 (GPIO_PORTA | GPIO_PF | 4) +#define PA5_PF_CSI_D1 (GPIO_PORTA | GPIO_PF | 5) +#define PA6_PF_CSI_D2 (GPIO_PORTA | GPIO_PF | 6) +#define PA7_PF_CSI_D3 (GPIO_PORTA | GPIO_PF | 7) +#define PA8_PF_CSI_D4 (GPIO_PORTA | GPIO_PF | 8) +#define PA9_PF_CSI_D5 (GPIO_PORTA | GPIO_PF | 9) +#define PA10_PF_CSI_D6 (GPIO_PORTA | GPIO_PF | 10) +#define PA11_PF_CSI_D7 (GPIO_PORTA | GPIO_PF | 11) +#define PA12_PF_CSI_VSYNC (GPIO_PORTA | GPIO_PF | 12) +#define PA13_PF_CSI_HSYNC (GPIO_PORTA | GPIO_PF | 13) +#define PA14_PF_CSI_PIXCLK (GPIO_PORTA | GPIO_PF | 14) +#define PA15_PF_I2C_SDA (GPIO_PORTA | GPIO_PF | GPIO_OUT | 15) +#define PA16_PF_I2C_SCL (GPIO_PORTA | GPIO_PF | GPIO_OUT | 16) +#define PA17_AF_ETMTRACEPKT4 (GPIO_PORTA | GPIO_AF | 17) +#define PA17_AIN_SPI2_SS (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17) +#define PA18_AF_ETMTRACEPKT5 (GPIO_PORTA | GPIO_AF | 18) +#define PA19_AF_ETMTRACEPKT6 (GPIO_PORTA | GPIO_AF | 19) +#define PA20_AF_ETMTRACEPKT7 (GPIO_PORTA | GPIO_AF | 20) +#define PA21_PF_A0 (GPIO_PORTA | GPIO_PF | 21) +#define PA22_PF_CS4 (GPIO_PORTA | GPIO_PF | 22) +#define PA23_PF_CS5 (GPIO_PORTA | GPIO_PF | 23) +#define PA24_PF_A16 (GPIO_PORTA | GPIO_PF | 24) +#define PA24_AF_ETMTRACEPKT0 (GPIO_PORTA | GPIO_AF | 24) +#define PA25_PF_A17 (GPIO_PORTA | GPIO_PF | 25) +#define PA25_AF_ETMTRACEPKT1 (GPIO_PORTA | GPIO_AF | 25) +#define PA26_PF_A18 (GPIO_PORTA | GPIO_PF | 26) +#define PA26_AF_ETMTRACEPKT2 (GPIO_PORTA | GPIO_AF | 26) +#define PA27_PF_A19 (GPIO_PORTA | GPIO_PF | 27) +#define PA27_AF_ETMTRACEPKT3 (GPIO_PORTA | GPIO_AF | 27) +#define PA28_PF_A20 (GPIO_PORTA | GPIO_PF | 28) +#define PA28_AF_ETMPIPESTAT0 (GPIO_PORTA | GPIO_AF | 28) +#define PA29_PF_A21 (GPIO_PORTA | GPIO_PF | 29) +#define PA29_AF_ETMPIPESTAT1 (GPIO_PORTA | GPIO_AF | 29) +#define PA30_PF_A22 (GPIO_PORTA | GPIO_PF | 30) +#define PA30_AF_ETMPIPESTAT2 (GPIO_PORTA | GPIO_AF | 30) +#define PA31_PF_A23 (GPIO_PORTA | GPIO_PF | 31) +#define PA31_AF_ETMTRACECLK (GPIO_PORTA | GPIO_AF | 31) +#define PB8_PF_SD_DAT0 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8) +#define PB8_AF_MS_PIO (GPIO_PORTB | GPIO_AF | 8) +#define PB9_PF_SD_DAT1 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9) +#define PB9_AF_MS_PI1 (GPIO_PORTB | GPIO_AF | 9) +#define PB10_PF_SD_DAT2 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10) +#define PB10_AF_MS_SCLKI (GPIO_PORTB | GPIO_AF | 10) +#define PB11_PF_SD_DAT3 (GPIO_PORTB | GPIO_PF | 11) +#define PB11_AF_MS_SDIO (GPIO_PORTB | GPIO_AF | 11) +#define PB12_PF_SD_CLK (GPIO_PORTB | GPIO_PF | 12) +#define PB12_AF_MS_SCLK0 (GPIO_PORTB | GPIO_AF | 12) +#define PB13_PF_SD_CMD (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13) +#define PB13_AF_MS_BS (GPIO_PORTB | GPIO_AF | 13) +#define PB14_AF_SSI_RXFS (GPIO_PORTB | GPIO_AF | 14) +#define PB15_AF_SSI_RXCLK (GPIO_PORTB | GPIO_AF | 15) +#define PB16_AF_SSI_RXDAT (GPIO_PORTB | GPIO_AF | GPIO_IN | 16) +#define PB17_AF_SSI_TXDAT (GPIO_PORTB | GPIO_AF | GPIO_OUT | 17) +#define PB18_AF_SSI_TXFS (GPIO_PORTB | GPIO_AF | 18) +#define PB19_AF_SSI_TXCLK (GPIO_PORTB | GPIO_AF | 19) +#define PB20_PF_USBD_AFE (GPIO_PORTB | GPIO_PF | 20) +#define PB21_PF_USBD_OE (GPIO_PORTB | GPIO_PF | 21) +#define PB22_PF_USBD_RCV (GPIO_PORTB | GPIO_PF | 22) +#define PB23_PF_USBD_SUSPND (GPIO_PORTB | GPIO_PF | 23) +#define PB24_PF_USBD_VP (GPIO_PORTB | GPIO_PF | 24) +#define PB25_PF_USBD_VM (GPIO_PORTB | GPIO_PF | 25) +#define PB26_PF_USBD_VPO (GPIO_PORTB | GPIO_PF | 26) +#define PB27_PF_USBD_VMO (GPIO_PORTB | GPIO_PF | 27) +#define PB28_PF_UART2_CTS (GPIO_PORTB | GPIO_PF | GPIO_OUT | 28) +#define PB29_PF_UART2_RTS (GPIO_PORTB | GPIO_PF | GPIO_IN | 29) +#define PB30_PF_UART2_TXD (GPIO_PORTB | GPIO_PF | GPIO_OUT | 30) +#define PB31_PF_UART2_RXD (GPIO_PORTB | GPIO_PF | GPIO_IN | 31) +#define PC3_PF_SSI_RXFS (GPIO_PORTC | GPIO_PF | 3) +#define PC4_PF_SSI_RXCLK (GPIO_PORTC | GPIO_PF | 4) +#define PC5_PF_SSI_RXDAT (GPIO_PORTC | GPIO_PF | GPIO_IN | 5) +#define PC6_PF_SSI_TXDAT (GPIO_PORTC | GPIO_PF | GPIO_OUT | 6) +#define PC7_PF_SSI_TXFS (GPIO_PORTC | GPIO_PF | 7) +#define PC8_PF_SSI_TXCLK (GPIO_PORTC | GPIO_PF | 8) +#define PC9_PF_UART1_CTS (GPIO_PORTC | GPIO_PF | GPIO_OUT | 9) +#define PC10_PF_UART1_RTS (GPIO_PORTC | GPIO_PF | GPIO_IN | 10) +#define PC11_PF_UART1_TXD (GPIO_PORTC | GPIO_PF | GPIO_OUT | 11) +#define PC12_PF_UART1_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 12) +#define PC13_PF_SPI1_SPI_RDY (GPIO_PORTC | GPIO_PF | 13) +#define PC14_PF_SPI1_SCLK (GPIO_PORTC | GPIO_PF | 14) +#define PC15_PF_SPI1_SS (GPIO_PORTC | GPIO_PF | 15) +#define PC16_PF_SPI1_MISO (GPIO_PORTC | GPIO_PF | 16) +#define PC17_PF_SPI1_MOSI (GPIO_PORTC | GPIO_PF | 17) +#define PC24_BIN_UART3_RI (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 24) +#define PC25_BIN_UART3_DSR (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 25) +#define PC26_AOUT_UART3_DTR (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 26) +#define PC27_BIN_UART3_DCD (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 27) +#define PC28_BIN_UART3_CTS (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 28) +#define PC29_AOUT_UART3_RTS (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 29) +#define PC30_BIN_UART3_TX (GPIO_PORTC | GPIO_BIN | 30) +#define PC31_AOUT_UART3_RX (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 31) +#define PD6_PF_LSCLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 6) +#define PD7_PF_REV (GPIO_PORTD | GPIO_PF | 7) +#define PD7_AF_UART2_DTR (GPIO_PORTD | GPIO_AF | GPIO_IN | 7) +#define PD7_AIN_SPI2_SCLK (GPIO_PORTD | GPIO_AIN | 7) +#define PD8_PF_CLS (GPIO_PORTD | GPIO_PF | 8) +#define PD8_AF_UART2_DCD (GPIO_PORTD | GPIO_AF | GPIO_OUT | 8) +#define PD8_AIN_SPI2_SS (GPIO_PORTD | GPIO_AIN | 8) +#define PD9_PF_PS (GPIO_PORTD | GPIO_PF | 9) +#define PD9_AF_UART2_RI (GPIO_PORTD | GPIO_AF | GPIO_OUT | 9) +#define PD9_AOUT_SPI2_RXD (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 9) +#define PD10_PF_SPL_SPR (GPIO_PORTD | GPIO_PF | GPIO_OUT | 10) +#define PD10_AF_UART2_DSR (GPIO_PORTD | GPIO_AF | GPIO_OUT | 10) +#define PD10_AIN_SPI2_TXD (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 10) +#define PD11_PF_CONTRAST (GPIO_PORTD | GPIO_PF | GPIO_OUT | 11) +#define PD12_PF_ACD_OE (GPIO_PORTD | GPIO_PF | GPIO_OUT | 12) +#define PD13_PF_LP_HSYNC (GPIO_PORTD | GPIO_PF | GPIO_OUT | 13) +#define PD14_PF_FLM_VSYNC (GPIO_PORTD | GPIO_PF | GPIO_OUT | 14) +#define PD15_PF_LD0 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 15) +#define PD16_PF_LD1 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 16) +#define PD17_PF_LD2 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 17) +#define PD18_PF_LD3 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 18) +#define PD19_PF_LD4 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 19) +#define PD20_PF_LD5 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 20) +#define PD21_PF_LD6 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 21) +#define PD22_PF_LD7 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 22) +#define PD23_PF_LD8 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 23) +#define PD24_PF_LD9 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 24) +#define PD25_PF_LD10 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 25) +#define PD26_PF_LD11 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 26) +#define PD27_PF_LD12 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 27) +#define PD28_PF_LD13 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 28) +#define PD29_PF_LD14 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 29) +#define PD30_PF_LD15 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 30) +#define PD31_PF_TMR2OUT (GPIO_PORTD | GPIO_PF | 31) +#define PD31_BIN_SPI2_TXD (GPIO_PORTD | GPIO_BIN | 31) -/* FIXME: This list is not completed. The correct directions are -* missing on some (many) pins -*/ - - -/* Primary GPIO pin functions */ - -#define PA0_AIN_SPI2_CLK (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0) -#define PA0_AF_ETMTRACESYNC (GPIO_PORTA | GPIO_AF | 0) -#define PA1_AOUT_SPI2_RXD (GPIO_PORTA | GPIO_AOUT | GPIO_IN | 1) -#define PA1_PF_TIN (GPIO_PORTA | GPIO_PF | 1) -#define PA2_PF_PWM0 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 2) -#define PA3_PF_CSI_MCLK (GPIO_PORTA | GPIO_PF | 3) -#define PA4_PF_CSI_D0 (GPIO_PORTA | GPIO_PF | 4) -#define PA5_PF_CSI_D1 (GPIO_PORTA | GPIO_PF | 5) -#define PA6_PF_CSI_D2 (GPIO_PORTA | GPIO_PF | 6) -#define PA7_PF_CSI_D3 (GPIO_PORTA | GPIO_PF | 7) -#define PA8_PF_CSI_D4 (GPIO_PORTA | GPIO_PF | 8) -#define PA9_PF_CSI_D5 (GPIO_PORTA | GPIO_PF | 9) -#define PA10_PF_CSI_D6 (GPIO_PORTA | GPIO_PF | 10) -#define PA11_PF_CSI_D7 (GPIO_PORTA | GPIO_PF | 11) -#define PA12_PF_CSI_VSYNC (GPIO_PORTA | GPIO_PF | 12) -#define PA13_PF_CSI_HSYNC (GPIO_PORTA | GPIO_PF | 13) -#define PA14_PF_CSI_PIXCLK (GPIO_PORTA | GPIO_PF | 14) -#define PA15_PF_I2C_SDA (GPIO_PORTA | GPIO_PF | GPIO_OUT | 15) -#define PA16_PF_I2C_SCL (GPIO_PORTA | GPIO_PF | GPIO_OUT | 16) -#define PA17_AF_ETMTRACEPKT4 (GPIO_PORTA | GPIO_AF | 17) -#define PA17_AIN_SPI2_SS (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17) -#define PA18_AF_ETMTRACEPKT5 (GPIO_PORTA | GPIO_AF | 18) -#define PA19_AF_ETMTRACEPKT6 (GPIO_PORTA | GPIO_AF | 19) -#define PA20_AF_ETMTRACEPKT7 (GPIO_PORTA | GPIO_AF | 20) -#define PA21_PF_A0 (GPIO_PORTA | GPIO_PF | 21) -#define PA22_PF_CS4 (GPIO_PORTA | GPIO_PF | 22) -#define PA23_PF_CS5 (GPIO_PORTA | GPIO_PF | 23) -#define PA24_PF_A16 (GPIO_PORTA | GPIO_PF | 24) -#define PA24_AF_ETMTRACEPKT0 (GPIO_PORTA | GPIO_AF | 24) -#define PA25_PF_A17 (GPIO_PORTA | GPIO_PF | 25) -#define PA25_AF_ETMTRACEPKT1 (GPIO_PORTA | GPIO_AF | 25) -#define PA26_PF_A18 (GPIO_PORTA | GPIO_PF | 26) -#define PA26_AF_ETMTRACEPKT2 (GPIO_PORTA | GPIO_AF | 26) -#define PA27_PF_A19 (GPIO_PORTA | GPIO_PF | 27) -#define PA27_AF_ETMTRACEPKT3 (GPIO_PORTA | GPIO_AF | 27) -#define PA28_PF_A20 (GPIO_PORTA | GPIO_PF | 28) -#define PA28_AF_ETMPIPESTAT0 (GPIO_PORTA | GPIO_AF | 28) -#define PA29_PF_A21 (GPIO_PORTA | GPIO_PF | 29) -#define PA29_AF_ETMPIPESTAT1 (GPIO_PORTA | GPIO_AF | 29) -#define PA30_PF_A22 (GPIO_PORTA | GPIO_PF | 30) -#define PA30_AF_ETMPIPESTAT2 (GPIO_PORTA | GPIO_AF | 30) -#define PA31_PF_A23 (GPIO_PORTA | GPIO_PF | 31) -#define PA31_AF_ETMTRACECLK (GPIO_PORTA | GPIO_AF | 31) -#define PB8_PF_SD_DAT0 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8) -#define PB8_AF_MS_PIO (GPIO_PORTB | GPIO_AF | 8) -#define PB9_PF_SD_DAT1 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9) -#define PB9_AF_MS_PI1 (GPIO_PORTB | GPIO_AF | 9) -#define PB10_PF_SD_DAT2 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10) -#define PB10_AF_MS_SCLKI (GPIO_PORTB | GPIO_AF | 10) -#define PB11_PF_SD_DAT3 (GPIO_PORTB | GPIO_PF | 11) -#define PB11_AF_MS_SDIO (GPIO_PORTB | GPIO_AF | 11) -#define PB12_PF_SD_CLK (GPIO_PORTB | GPIO_PF | 12) -#define PB12_AF_MS_SCLK0 (GPIO_PORTB | GPIO_AF | 12) -#define PB13_PF_SD_CMD (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13) -#define PB13_AF_MS_BS (GPIO_PORTB | GPIO_AF | 13) -#define PB14_AF_SSI_RXFS (GPIO_PORTB | GPIO_AF | 14) -#define PB15_AF_SSI_RXCLK (GPIO_PORTB | GPIO_AF | 15) -#define PB16_AF_SSI_RXDAT (GPIO_PORTB | GPIO_AF | GPIO_IN | 16) -#define PB17_AF_SSI_TXDAT (GPIO_PORTB | GPIO_AF | GPIO_OUT | 17) -#define PB18_AF_SSI_TXFS (GPIO_PORTB | GPIO_AF | 18) -#define PB19_AF_SSI_TXCLK (GPIO_PORTB | GPIO_AF | 19) -#define PB20_PF_USBD_AFE (GPIO_PORTB | GPIO_PF | 20) -#define PB21_PF_USBD_OE (GPIO_PORTB | GPIO_PF | 21) -#define PB22_PF_USBD_RCV (GPIO_PORTB | GPIO_PF | 22) -#define PB23_PF_USBD_SUSPND (GPIO_PORTB | GPIO_PF | 23) -#define PB24_PF_USBD_VP (GPIO_PORTB | GPIO_PF | 24) -#define PB25_PF_USBD_VM (GPIO_PORTB | GPIO_PF | 25) -#define PB26_PF_USBD_VPO (GPIO_PORTB | GPIO_PF | 26) -#define PB27_PF_USBD_VMO (GPIO_PORTB | GPIO_PF | 27) -#define PB28_PF_UART2_CTS (GPIO_PORTB | GPIO_PF | GPIO_OUT | 28) -#define PB29_PF_UART2_RTS (GPIO_PORTB | GPIO_PF | GPIO_IN | 29) -#define PB30_PF_UART2_TXD (GPIO_PORTB | GPIO_PF | GPIO_OUT | 30) -#define PB31_PF_UART2_RXD (GPIO_PORTB | GPIO_PF | GPIO_IN | 31) -#define PC3_PF_SSI_RXFS (GPIO_PORTC | GPIO_PF | 3) -#define PC4_PF_SSI_RXCLK (GPIO_PORTC | GPIO_PF | 4) -#define PC5_PF_SSI_RXDAT (GPIO_PORTC | GPIO_PF | GPIO_IN | 5) -#define PC6_PF_SSI_TXDAT (GPIO_PORTC | GPIO_PF | GPIO_OUT | 6) -#define PC7_PF_SSI_TXFS (GPIO_PORTC | GPIO_PF | 7) -#define PC8_PF_SSI_TXCLK (GPIO_PORTC | GPIO_PF | 8) -#define PC9_PF_UART1_CTS (GPIO_PORTC | GPIO_PF | GPIO_OUT | 9) -#define PC10_PF_UART1_RTS (GPIO_PORTC | GPIO_PF | GPIO_IN | 10) -#define PC11_PF_UART1_TXD (GPIO_PORTC | GPIO_PF | GPIO_OUT | 11) -#define PC12_PF_UART1_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 12) -#define PC13_PF_SPI1_SPI_RDY (GPIO_PORTC | GPIO_PF | 13) -#define PC14_PF_SPI1_SCLK (GPIO_PORTC | GPIO_PF | 14) -#define PC15_PF_SPI1_SS (GPIO_PORTC | GPIO_PF | 15) -#define PC16_PF_SPI1_MISO (GPIO_PORTC | GPIO_PF | 16) -#define PC17_PF_SPI1_MOSI (GPIO_PORTC | GPIO_PF | 17) -#define PC24_BIN_UART3_RI (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 24) -#define PC25_BIN_UART3_DSR (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 25) -#define PC26_AOUT_UART3_DTR (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 26) -#define PC27_BIN_UART3_DCD (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 27) -#define PC28_BIN_UART3_CTS (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 28) -#define PC29_AOUT_UART3_RTS (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 29) -#define PC30_BIN_UART3_TX (GPIO_PORTC | GPIO_BIN | 30) -#define PC31_AOUT_UART3_RX (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 31) -#define PD6_PF_LSCLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 6) -#define PD7_PF_REV (GPIO_PORTD | GPIO_PF | 7) -#define PD7_AF_UART2_DTR (GPIO_PORTD | GPIO_AF | GPIO_IN | 7) -#define PD7_AIN_SPI2_SCLK (GPIO_PORTD | GPIO_AIN | 7) -#define PD8_PF_CLS (GPIO_PORTD | GPIO_PF | 8) -#define PD8_AF_UART2_DCD (GPIO_PORTD | GPIO_AF | GPIO_OUT | 8) -#define PD8_AIN_SPI2_SS (GPIO_PORTD | GPIO_AIN | 8) -#define PD9_PF_PS (GPIO_PORTD | GPIO_PF | 9) -#define PD9_AF_UART2_RI (GPIO_PORTD | GPIO_AF | GPIO_OUT | 9) -#define PD9_AOUT_SPI2_RXD (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 9) -#define PD10_PF_SPL_SPR (GPIO_PORTD | GPIO_PF | GPIO_OUT | 10) -#define PD10_AF_UART2_DSR (GPIO_PORTD | GPIO_AF | GPIO_OUT | 10) -#define PD10_AIN_SPI2_TXD (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 10) -#define PD11_PF_CONTRAST (GPIO_PORTD | GPIO_PF | GPIO_OUT | 11) -#define PD12_PF_ACD_OE (GPIO_PORTD | GPIO_PF | GPIO_OUT | 12) -#define PD13_PF_LP_HSYNC (GPIO_PORTD | GPIO_PF | GPIO_OUT | 13) -#define PD14_PF_FLM_VSYNC (GPIO_PORTD | GPIO_PF | GPIO_OUT | 14) -#define PD15_PF_LD0 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 15) -#define PD16_PF_LD1 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 16) -#define PD17_PF_LD2 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 17) -#define PD18_PF_LD3 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 18) -#define PD19_PF_LD4 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 19) -#define PD20_PF_LD5 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 20) -#define PD21_PF_LD6 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 21) -#define PD22_PF_LD7 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 22) -#define PD23_PF_LD8 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 23) -#define PD24_PF_LD9 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 24) -#define PD25_PF_LD10 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 25) -#define PD26_PF_LD11 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 26) -#define PD27_PF_LD12 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 27) -#define PD28_PF_LD13 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 28) -#define PD29_PF_LD14 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 29) -#define PD30_PF_LD15 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 30) -#define PD31_PF_TMR2OUT (GPIO_PORTD | GPIO_PF | 31) -#define PD31_BIN_SPI2_TXD (GPIO_PORTD | GPIO_BIN | 31) - - -#endif +#endif /* ifndef __MACH_IOMUX_MX1_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx21.h b/arch/arm/plat-mxc/include/mach/iomux-mx21.h index 63aaa972e27..1495dfda783 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx21.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx21.h @@ -1,126 +1,122 @@ /* -* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de> -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License -* as published by the Free Software Foundation; either version 2 -* of the License, or (at your option) any later version. -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program; if not, write to the Free Software -* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, -* MA 02110-1301, USA. -*/ - -#ifndef _MXC_IOMUX_MX21_H -#define _MXC_IOMUX_MX21_H - -#ifndef GPIO_PORTA -#error Please include mach/iomux.h -#endif - + * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ +#ifndef __MACH_IOMUX_MX21_H__ +#define __MACH_IOMUX_MX21_H__ + +#include <mach/iomux-mx2x.h> +#include <mach/iomux-v1.h> /* Primary GPIO pin functions */ -#define PB22_PF_USBH1_BYP (GPIO_PORTB | GPIO_PF | 22) -#define PB25_PF_USBH1_ON (GPIO_PORTB | GPIO_PF | 25) -#define PC5_PF_USBOTG_SDA (GPIO_PORTC | GPIO_PF | 5) -#define PC6_PF_USBOTG_SCL (GPIO_PORTC | GPIO_PF | 6) -#define PC7_PF_USBOTG_ON (GPIO_PORTC | GPIO_PF | 7) -#define PC8_PF_USBOTG_FS (GPIO_PORTC | GPIO_PF | 8) -#define PC9_PF_USBOTG_OE (GPIO_PORTC | GPIO_PF | 9) -#define PC10_PF_USBOTG_TXDM (GPIO_PORTC | GPIO_PF | 10) -#define PC11_PF_USBOTG_TXDP (GPIO_PORTC | GPIO_PF | 11) -#define PC12_PF_USBOTG_RXDM (GPIO_PORTC | GPIO_PF | 12) -#define PC13_PF_USBOTG_RXDP (GPIO_PORTC | GPIO_PF | 13) -#define PC16_PF_SAP_FS (GPIO_PORTC | GPIO_PF | 16) -#define PC17_PF_SAP_RXD (GPIO_PORTC | GPIO_PF | 17) -#define PC18_PF_SAP_TXD (GPIO_PORTC | GPIO_PF | 18) -#define PC19_PF_SAP_CLK (GPIO_PORTC | GPIO_PF | 19) -#define PE0_PF_TEST_WB2 (GPIO_PORTE | GPIO_PF | 0) -#define PE1_PF_TEST_WB1 (GPIO_PORTE | GPIO_PF | 1) -#define PE2_PF_TEST_WB0 (GPIO_PORTE | GPIO_PF | 2) -#define PF1_PF_NFCE (GPIO_PORTF | GPIO_PF | 1) -#define PF3_PF_NFCLE (GPIO_PORTF | GPIO_PF | 3) -#define PF7_PF_NFIO0 (GPIO_PORTF | GPIO_PF | 7) -#define PF8_PF_NFIO1 (GPIO_PORTF | GPIO_PF | 8) -#define PF9_PF_NFIO2 (GPIO_PORTF | GPIO_PF | 9) -#define PF10_PF_NFIO3 (GPIO_PORTF | GPIO_PF | 10) -#define PF11_PF_NFIO4 (GPIO_PORTF | GPIO_PF | 11) -#define PF12_PF_NFIO5 (GPIO_PORTF | GPIO_PF | 12) -#define PF13_PF_NFIO6 (GPIO_PORTF | GPIO_PF | 13) -#define PF14_PF_NFIO7 (GPIO_PORTF | GPIO_PF | 14) -#define PF16_PF_RES (GPIO_PORTF | GPIO_PF | 16) +#define PB22_PF_USBH1_BYP (GPIO_PORTB | GPIO_PF | 22) +#define PB25_PF_USBH1_ON (GPIO_PORTB | GPIO_PF | 25) +#define PC5_PF_USBOTG_SDA (GPIO_PORTC | GPIO_PF | 5) +#define PC6_PF_USBOTG_SCL (GPIO_PORTC | GPIO_PF | 6) +#define PC7_PF_USBOTG_ON (GPIO_PORTC | GPIO_PF | 7) +#define PC8_PF_USBOTG_FS (GPIO_PORTC | GPIO_PF | 8) +#define PC9_PF_USBOTG_OE (GPIO_PORTC | GPIO_PF | 9) +#define PC10_PF_USBOTG_TXDM (GPIO_PORTC | GPIO_PF | 10) +#define PC11_PF_USBOTG_TXDP (GPIO_PORTC | GPIO_PF | 11) +#define PC12_PF_USBOTG_RXDM (GPIO_PORTC | GPIO_PF | 12) +#define PC13_PF_USBOTG_RXDP (GPIO_PORTC | GPIO_PF | 13) +#define PC16_PF_SAP_FS (GPIO_PORTC | GPIO_PF | 16) +#define PC17_PF_SAP_RXD (GPIO_PORTC | GPIO_PF | 17) +#define PC18_PF_SAP_TXD (GPIO_PORTC | GPIO_PF | 18) +#define PC19_PF_SAP_CLK (GPIO_PORTC | GPIO_PF | 19) +#define PE0_PF_TEST_WB2 (GPIO_PORTE | GPIO_PF | 0) +#define PE1_PF_TEST_WB1 (GPIO_PORTE | GPIO_PF | 1) +#define PE2_PF_TEST_WB0 (GPIO_PORTE | GPIO_PF | 2) +#define PF1_PF_NFCE (GPIO_PORTF | GPIO_PF | 1) +#define PF3_PF_NFCLE (GPIO_PORTF | GPIO_PF | 3) +#define PF7_PF_NFIO0 (GPIO_PORTF | GPIO_PF | 7) +#define PF8_PF_NFIO1 (GPIO_PORTF | GPIO_PF | 8) +#define PF9_PF_NFIO2 (GPIO_PORTF | GPIO_PF | 9) +#define PF10_PF_NFIO3 (GPIO_PORTF | GPIO_PF | 10) +#define PF11_PF_NFIO4 (GPIO_PORTF | GPIO_PF | 11) +#define PF12_PF_NFIO5 (GPIO_PORTF | GPIO_PF | 12) +#define PF13_PF_NFIO6 (GPIO_PORTF | GPIO_PF | 13) +#define PF14_PF_NFIO7 (GPIO_PORTF | GPIO_PF | 14) +#define PF16_PF_RES (GPIO_PORTF | GPIO_PF | 16) /* Alternate GPIO pin functions */ -#define PA5_AF_BMI_CLK_CS (GPIO_PORTA | GPIO_AF | 5) -#define PA6_AF_BMI_D0 (GPIO_PORTA | GPIO_AF | 6) -#define PA7_AF_BMI_D1 (GPIO_PORTA | GPIO_AF | 7) -#define PA8_AF_BMI_D2 (GPIO_PORTA | GPIO_AF | 8) -#define PA9_AF_BMI_D3 (GPIO_PORTA | GPIO_AF | 9) -#define PA10_AF_BMI_D4 (GPIO_PORTA | GPIO_AF | 10) -#define PA11_AF_BMI_D5 (GPIO_PORTA | GPIO_AF | 11) -#define PA12_AF_BMI_D6 (GPIO_PORTA | GPIO_AF | 12) -#define PA13_AF_BMI_D7 (GPIO_PORTA | GPIO_AF | 13) -#define PA14_AF_BMI_D8 (GPIO_PORTA | GPIO_AF | 14) -#define PA15_AF_BMI_D9 (GPIO_PORTA | GPIO_AF | 15) -#define PA16_AF_BMI_D10 (GPIO_PORTA | GPIO_AF | 16) -#define PA17_AF_BMI_D11 (GPIO_PORTA | GPIO_AF | 17) -#define PA18_AF_BMI_D12 (GPIO_PORTA | GPIO_AF | 18) -#define PA19_AF_BMI_D13 (GPIO_PORTA | GPIO_AF | 19) -#define PA20_AF_BMI_D14 (GPIO_PORTA | GPIO_AF | 20) -#define PA21_AF_BMI_D15 (GPIO_PORTA | GPIO_AF | 21) -#define PA22_AF_BMI_READ_REQ (GPIO_PORTA | GPIO_AF | 22) -#define PA23_AF_BMI_WRITE (GPIO_PORTA | GPIO_AF | 23) -#define PA29_AF_BMI_RX_FULL (GPIO_PORTA | GPIO_AF | 29) -#define PA30_AF_BMI_READ (GPIO_PORTA | GPIO_AF | 30) +#define PA5_AF_BMI_CLK_CS (GPIO_PORTA | GPIO_AF | 5) +#define PA6_AF_BMI_D0 (GPIO_PORTA | GPIO_AF | 6) +#define PA7_AF_BMI_D1 (GPIO_PORTA | GPIO_AF | 7) +#define PA8_AF_BMI_D2 (GPIO_PORTA | GPIO_AF | 8) +#define PA9_AF_BMI_D3 (GPIO_PORTA | GPIO_AF | 9) +#define PA10_AF_BMI_D4 (GPIO_PORTA | GPIO_AF | 10) +#define PA11_AF_BMI_D5 (GPIO_PORTA | GPIO_AF | 11) +#define PA12_AF_BMI_D6 (GPIO_PORTA | GPIO_AF | 12) +#define PA13_AF_BMI_D7 (GPIO_PORTA | GPIO_AF | 13) +#define PA14_AF_BMI_D8 (GPIO_PORTA | GPIO_AF | 14) +#define PA15_AF_BMI_D9 (GPIO_PORTA | GPIO_AF | 15) +#define PA16_AF_BMI_D10 (GPIO_PORTA | GPIO_AF | 16) +#define PA17_AF_BMI_D11 (GPIO_PORTA | GPIO_AF | 17) +#define PA18_AF_BMI_D12 (GPIO_PORTA | GPIO_AF | 18) +#define PA19_AF_BMI_D13 (GPIO_PORTA | GPIO_AF | 19) +#define PA20_AF_BMI_D14 (GPIO_PORTA | GPIO_AF | 20) +#define PA21_AF_BMI_D15 (GPIO_PORTA | GPIO_AF | 21) +#define PA22_AF_BMI_READ_REQ (GPIO_PORTA | GPIO_AF | 22) +#define PA23_AF_BMI_WRITE (GPIO_PORTA | GPIO_AF | 23) +#define PA29_AF_BMI_RX_FULL (GPIO_PORTA | GPIO_AF | 29) +#define PA30_AF_BMI_READ (GPIO_PORTA | GPIO_AF | 30) /* AIN GPIO pin functions */ -#define PC14_AIN_SYS_CLK (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14) -#define PD21_AIN_USBH2_FS (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 21) -#define PD22_AIN_USBH2_OE (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 22) -#define PD23_AIN_USBH2_TXDM (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 23) -#define PD24_AIN_USBH2_TXDP (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 24) -#define PE8_AIN_IR_TXD (GPIO_PORTE | GPIO_AIN | GPIO_OUT | 8) -#define PF0_AIN_PC_RST (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 0) -#define PF1_AIN_PC_CE1 (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 1) -#define PF2_AIN_PC_CE2 (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 2) -#define PF3_AIN_PC_POE (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 3) -#define PF4_AIN_PC_OE (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 4) -#define PF5_AIN_PC_RW (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 5) +#define PC14_AIN_SYS_CLK (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14) +#define PD21_AIN_USBH2_FS (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 21) +#define PD22_AIN_USBH2_OE (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 22) +#define PD23_AIN_USBH2_TXDM (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 23) +#define PD24_AIN_USBH2_TXDP (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 24) +#define PE8_AIN_IR_TXD (GPIO_PORTE | GPIO_AIN | GPIO_OUT | 8) +#define PF0_AIN_PC_RST (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 0) +#define PF1_AIN_PC_CE1 (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 1) +#define PF2_AIN_PC_CE2 (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 2) +#define PF3_AIN_PC_POE (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 3) +#define PF4_AIN_PC_OE (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 4) +#define PF5_AIN_PC_RW (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 5) /* BIN GPIO pin functions */ -#define PC14_BIN_SYS_CLK (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14) -#define PD27_BIN_EXT_DMA_GRANT (GPIO_PORTD | GPIO_BIN | GPIO_OUT | 27) +#define PC14_BIN_SYS_CLK (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14) +#define PD27_BIN_EXT_DMA_GRANT (GPIO_PORTD | GPIO_BIN | GPIO_OUT | 27) /* CIN GPIO pin functions */ -#define PB26_CIN_USBH1_RXDAT (GPIO_PORTB | GPIO_CIN | GPIO_OUT | 26) +#define PB26_CIN_USBH1_RXDAT (GPIO_PORTB | GPIO_CIN | GPIO_OUT | 26) /* AOUT GPIO pin functions */ -#define PA29_AOUT_BMI_WAIT (GPIO_PORTA | GPIO_AOUT | GPIO_IN | 29) -#define PD19_AOUT_USBH2_RXDM (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 19) -#define PD20_AOUT_USBH2_RXDP (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 20) -#define PD25_AOUT_EXT_DMAREQ (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 25) -#define PD26_AOUT_USBOTG_RXDAT (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 26) -#define PE9_AOUT_IR_RXD (GPIO_PORTE | GPIO_AOUT | GPIO_IN | 9) -#define PF6_AOUT_PC_BVD2 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 6) -#define PF7_AOUT_PC_BVD1 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 7) -#define PF8_AOUT_PC_VS2 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 8) -#define PF9_AOUT_PC_VS1 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 9) -#define PF10_AOUT_PC_WP (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 10) -#define PF11_AOUT_PC_READY (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 11) -#define PF12_AOUT_PC_WAIT (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 12) -#define PF13_AOUT_PC_CD2 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 13) -#define PF14_AOUT_PC_CD1 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 14) - - -#endif +#define PA29_AOUT_BMI_WAIT (GPIO_PORTA | GPIO_AOUT | GPIO_IN | 29) +#define PD19_AOUT_USBH2_RXDM (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 19) +#define PD20_AOUT_USBH2_RXDP (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 20) +#define PD25_AOUT_EXT_DMAREQ (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 25) +#define PD26_AOUT_USBOTG_RXDAT (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 26) +#define PE9_AOUT_IR_RXD (GPIO_PORTE | GPIO_AOUT | GPIO_IN | 9) +#define PF6_AOUT_PC_BVD2 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 6) +#define PF7_AOUT_PC_BVD1 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 7) +#define PF8_AOUT_PC_VS2 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 8) +#define PF9_AOUT_PC_VS1 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 9) +#define PF10_AOUT_PC_WP (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 10) +#define PF11_AOUT_PC_READY (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 11) +#define PF12_AOUT_PC_WAIT (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 12) +#define PF13_AOUT_PC_CD2 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 13) +#define PF14_AOUT_PC_CD1 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 14) + +#endif /* ifndef __MACH_IOMUX_MX21_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx25.h b/arch/arm/plat-mxc/include/mach/iomux-mx25.h index 9af494f0ab3..f39220d1b67 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx25.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx25.h @@ -7,7 +7,7 @@ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. * and * arch/arm/plat-mxc/include/mach/iomux-mx35.h - * Copyright (C, NO_PAD_CTRL) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de> + * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License @@ -16,24 +16,11 @@ * http://www.opensource.org/licenses/gpl-license.html * http://www.gnu.org/copyleft/gpl.html */ -#ifndef __IOMUX_MX25_H__ -#define __IOMUX_MX25_H__ +#ifndef __MACH_IOMUX_MX25_H__ +#define __MACH_IOMUX_MX25_H__ #include <mach/iomux-v3.h> -#ifndef GPIO_PORTA -#error Please include mach/iomux.h -#endif - -/* - * - * @brief MX25 I/O Pin List - * - * @ingroup GPIO_MX25 - */ - -#ifndef __ASSEMBLY__ - /* * IOMUX/PAD Bit field definitions */ @@ -462,9 +449,11 @@ #define MX25_PAD_GPIO_C__CAN2_TX IOMUX_PAD(0x3f8, 0x1fc, 0x16, 0, 0, PAD_CTL_PUS_22K_UP) #define MX25_PAD_GPIO_D__GPIO_D IOMUX_PAD(0x3fc, 0x200, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_GPIO_E__LD16 IOMUX_PAD(0x400, 0x204, 0x02, 0, 0, NO_PAD_CTRL) #define MX25_PAD_GPIO_D__CAN2_RX IOMUX_PAD(0x3fc, 0x200, 0x16, 0x484, 1, PAD_CTL_PUS_22K_UP) #define MX25_PAD_GPIO_E__GPIO_E IOMUX_PAD(0x400, 0x204, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_GPIO_F__LD17 IOMUX_PAD(0x404, 0x208, 0x02, 0, 0, NO_PAD_CTRL) #define MX25_PAD_GPIO_E__AUD7_TXD IOMUX_PAD(0x400, 0x204, 0x14, 0, 0, NO_PAD_CTRL) #define MX25_PAD_GPIO_F__GPIO_F IOMUX_PAD(0x404, 0x208, 0x10, 0, 0, NO_PAD_CTRL) @@ -513,5 +502,4 @@ #define MX25_PAD_CTL_GRP_DVS_SDHC1 IOMUX_PAD(0x458, 0x000, 0, 0, 0, NO_PAD_CTRL) #define MX25_PAD_CTL_GRP_DVS_LCD IOMUX_PAD(0x45c, 0x000, 0, 0, 0, NO_PAD_CTRL) -#endif // __ASSEMBLY__ -#endif // __IOMUX_MX25_H__ +#endif /* __MACH_IOMUX_MX25_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx27.h b/arch/arm/plat-mxc/include/mach/iomux-mx27.h index 5ac158b70f6..d9f9a6e32d8 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx27.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx27.h @@ -1,207 +1,205 @@ /* -* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> -* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de> -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License -* as published by the Free Software Foundation; either version 2 -* of the License, or (at your option) any later version. -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program; if not, write to the Free Software -* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, -* MA 02110-1301, USA. -*/ - -#ifndef _MXC_IOMUX_MX27_H -#define _MXC_IOMUX_MX27_H - -#ifndef GPIO_PORTA -#error Please include mach/iomux.h -#endif - + * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> + * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ +#ifndef __MACH_IOMUX_MX27_H__ +#define __MACH_IOMUX_MX27_H__ + +#include <mach/iomux-mx2x.h> +#include <mach/iomux-v1.h> /* Primary GPIO pin functions */ -#define PA0_PF_USBH2_CLK (GPIO_PORTA | GPIO_PF | 0) -#define PA1_PF_USBH2_DIR (GPIO_PORTA | GPIO_PF | 1) -#define PA2_PF_USBH2_DATA7 (GPIO_PORTA | GPIO_PF | 2) -#define PA3_PF_USBH2_NXT (GPIO_PORTA | GPIO_PF | 3) -#define PA4_PF_USBH2_STP (GPIO_PORTA | GPIO_PF | 4) -#define PB22_PF_USBH1_SUSP (GPIO_PORTB | GPIO_PF | 22) -#define PB25_PF_USBH1_RCV (GPIO_PORTB | GPIO_PF | 25) -#define PC5_PF_I2C2_SDA (GPIO_PORTC | GPIO_PF | GPIO_IN | 5) -#define PC6_PF_I2C2_SCL (GPIO_PORTC | GPIO_PF | GPIO_IN | 6) -#define PC7_PF_USBOTG_DATA5 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 7) -#define PC8_PF_USBOTG_DATA6 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 8) -#define PC9_PF_USBOTG_DATA0 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 9) -#define PC10_PF_USBOTG_DATA2 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 10) -#define PC11_PF_USBOTG_DATA1 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 11) -#define PC12_PF_USBOTG_DATA4 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 12) -#define PC13_PF_USBOTG_DATA3 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 13) -#define PC16_PF_SSI4_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 16) -#define PC17_PF_SSI4_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 17) -#define PC18_PF_SSI4_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 18) -#define PC19_PF_SSI4_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 19) -#define PC25_AF_GPT5_TIN (GPIO_PORTC | GPIO_AF | 25) -#define PC27_AF_GPT4_TIN (GPIO_PORTC | GPIO_AF | 27) -#define PD0_PF_SD3_CMD (GPIO_PORTD | GPIO_PF | 0) -#define PD1_PF_SD3_CLK (GPIO_PORTD | GPIO_PF | 1) -#define PD2_PF_ATA_DATA0 (GPIO_PORTD | GPIO_PF | 2) -#define PD3_PF_ATA_DATA1 (GPIO_PORTD | GPIO_PF | 3) -#define PD4_PF_ATA_DATA2 (GPIO_PORTD | GPIO_PF | 4) -#define PD5_PF_ATA_DATA3 (GPIO_PORTD | GPIO_PF | 5) -#define PD6_PF_ATA_DATA4 (GPIO_PORTD | GPIO_PF | 6) -#define PD7_PF_ATA_DATA5 (GPIO_PORTD | GPIO_PF | 7) -#define PD8_PF_ATA_DATA6 (GPIO_PORTD | GPIO_PF | 8) -#define PD9_PF_ATA_DATA7 (GPIO_PORTD | GPIO_PF | 9) -#define PD10_PF_ATA_DATA8 (GPIO_PORTD | GPIO_PF | 10) -#define PD11_PF_ATA_DATA9 (GPIO_PORTD | GPIO_PF | 11) -#define PD12_PF_ATA_DATA10 (GPIO_PORTD | GPIO_PF | 12) -#define PD13_PF_ATA_DATA11 (GPIO_PORTD | GPIO_PF | 13) -#define PD14_PF_ATA_DATA12 (GPIO_PORTD | GPIO_PF | 14) -#define PD15_PF_ATA_DATA13 (GPIO_PORTD | GPIO_PF | 15) -#define PD16_PF_ATA_DATA14 (GPIO_PORTD | GPIO_PF | 16) -#define PE0_PF_USBOTG_NXT (GPIO_PORTE | GPIO_PF | GPIO_OUT | 0) -#define PE1_PF_USBOTG_STP (GPIO_PORTE | GPIO_PF | GPIO_OUT | 1) -#define PE2_PF_USBOTG_DIR (GPIO_PORTE | GPIO_PF | GPIO_OUT | 2) -#define PE24_PF_USBOTG_CLK (GPIO_PORTE | GPIO_PF | GPIO_OUT | 24) -#define PE25_PF_USBOTG_DATA7 (GPIO_PORTE | GPIO_PF | GPIO_OUT | 25) -#define PF1_PF_NFCLE (GPIO_PORTF | GPIO_PF | 1) -#define PF3_PF_NFCE (GPIO_PORTF | GPIO_PF | 3) -#define PF7_PF_PC_POE (GPIO_PORTF | GPIO_PF | 7) -#define PF8_PF_PC_RW (GPIO_PORTF | GPIO_PF | 8) -#define PF9_PF_PC_IOIS16 (GPIO_PORTF | GPIO_PF | 9) -#define PF10_PF_PC_RST (GPIO_PORTF | GPIO_PF | 10) -#define PF11_PF_PC_BVD2 (GPIO_PORTF | GPIO_PF | 11) -#define PF12_PF_PC_BVD1 (GPIO_PORTF | GPIO_PF | 12) -#define PF13_PF_PC_VS2 (GPIO_PORTF | GPIO_PF | 13) -#define PF14_PF_PC_VS1 (GPIO_PORTF | GPIO_PF | 14) -#define PF16_PF_PC_PWRON (GPIO_PORTF | GPIO_PF | 16) -#define PF17_PF_PC_READY (GPIO_PORTF | GPIO_PF | 17) -#define PF18_PF_PC_WAIT (GPIO_PORTF | GPIO_PF | 18) -#define PF19_PF_PC_CD2 (GPIO_PORTF | GPIO_PF | 19) -#define PF20_PF_PC_CD1 (GPIO_PORTF | GPIO_PF | 20) -#define PF23_PF_ATA_DATA15 (GPIO_PORTF | GPIO_PF | 23) +#define PA0_PF_USBH2_CLK (GPIO_PORTA | GPIO_PF | 0) +#define PA1_PF_USBH2_DIR (GPIO_PORTA | GPIO_PF | 1) +#define PA2_PF_USBH2_DATA7 (GPIO_PORTA | GPIO_PF | 2) +#define PA3_PF_USBH2_NXT (GPIO_PORTA | GPIO_PF | 3) +#define PA4_PF_USBH2_STP (GPIO_PORTA | GPIO_PF | 4) +#define PB22_PF_USBH1_SUSP (GPIO_PORTB | GPIO_PF | 22) +#define PB25_PF_USBH1_RCV (GPIO_PORTB | GPIO_PF | 25) +#define PC5_PF_I2C2_SDA (GPIO_PORTC | GPIO_PF | GPIO_IN | 5) +#define PC6_PF_I2C2_SCL (GPIO_PORTC | GPIO_PF | GPIO_IN | 6) +#define PC7_PF_USBOTG_DATA5 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 7) +#define PC8_PF_USBOTG_DATA6 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 8) +#define PC9_PF_USBOTG_DATA0 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 9) +#define PC10_PF_USBOTG_DATA2 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 10) +#define PC11_PF_USBOTG_DATA1 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 11) +#define PC12_PF_USBOTG_DATA4 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 12) +#define PC13_PF_USBOTG_DATA3 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 13) +#define PC16_PF_SSI4_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 16) +#define PC17_PF_SSI4_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 17) +#define PC18_PF_SSI4_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 18) +#define PC19_PF_SSI4_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 19) +#define PD0_PF_SD3_CMD (GPIO_PORTD | GPIO_PF | 0) +#define PD1_PF_SD3_CLK (GPIO_PORTD | GPIO_PF | 1) +#define PD2_PF_ATA_DATA0 (GPIO_PORTD | GPIO_PF | 2) +#define PD3_PF_ATA_DATA1 (GPIO_PORTD | GPIO_PF | 3) +#define PD4_PF_ATA_DATA2 (GPIO_PORTD | GPIO_PF | 4) +#define PD5_PF_ATA_DATA3 (GPIO_PORTD | GPIO_PF | 5) +#define PD6_PF_ATA_DATA4 (GPIO_PORTD | GPIO_PF | 6) +#define PD7_PF_ATA_DATA5 (GPIO_PORTD | GPIO_PF | 7) +#define PD8_PF_ATA_DATA6 (GPIO_PORTD | GPIO_PF | 8) +#define PD9_PF_ATA_DATA7 (GPIO_PORTD | GPIO_PF | 9) +#define PD10_PF_ATA_DATA8 (GPIO_PORTD | GPIO_PF | 10) +#define PD11_PF_ATA_DATA9 (GPIO_PORTD | GPIO_PF | 11) +#define PD12_PF_ATA_DATA10 (GPIO_PORTD | GPIO_PF | 12) +#define PD13_PF_ATA_DATA11 (GPIO_PORTD | GPIO_PF | 13) +#define PD14_PF_ATA_DATA12 (GPIO_PORTD | GPIO_PF | 14) +#define PD15_PF_ATA_DATA13 (GPIO_PORTD | GPIO_PF | 15) +#define PD16_PF_ATA_DATA14 (GPIO_PORTD | GPIO_PF | 16) +#define PE0_PF_USBOTG_NXT (GPIO_PORTE | GPIO_PF | GPIO_OUT | 0) +#define PE1_PF_USBOTG_STP (GPIO_PORTE | GPIO_PF | GPIO_OUT | 1) +#define PE2_PF_USBOTG_DIR (GPIO_PORTE | GPIO_PF | GPIO_OUT | 2) +#define PE24_PF_USBOTG_CLK (GPIO_PORTE | GPIO_PF | GPIO_OUT | 24) +#define PE25_PF_USBOTG_DATA7 (GPIO_PORTE | GPIO_PF | GPIO_OUT | 25) +#define PF1_PF_NFCLE (GPIO_PORTF | GPIO_PF | 1) +#define PF3_PF_NFCE (GPIO_PORTF | GPIO_PF | 3) +#define PF7_PF_PC_POE (GPIO_PORTF | GPIO_PF | 7) +#define PF8_PF_PC_RW (GPIO_PORTF | GPIO_PF | 8) +#define PF9_PF_PC_IOIS16 (GPIO_PORTF | GPIO_PF | 9) +#define PF10_PF_PC_RST (GPIO_PORTF | GPIO_PF | 10) +#define PF11_PF_PC_BVD2 (GPIO_PORTF | GPIO_PF | 11) +#define PF12_PF_PC_BVD1 (GPIO_PORTF | GPIO_PF | 12) +#define PF13_PF_PC_VS2 (GPIO_PORTF | GPIO_PF | 13) +#define PF14_PF_PC_VS1 (GPIO_PORTF | GPIO_PF | 14) +#define PF16_PF_PC_PWRON (GPIO_PORTF | GPIO_PF | 16) +#define PF17_PF_PC_READY (GPIO_PORTF | GPIO_PF | 17) +#define PF18_PF_PC_WAIT (GPIO_PORTF | GPIO_PF | 18) +#define PF19_PF_PC_CD2 (GPIO_PORTF | GPIO_PF | 19) +#define PF20_PF_PC_CD1 (GPIO_PORTF | GPIO_PF | 20) +#define PF23_PF_ATA_DATA15 (GPIO_PORTF | GPIO_PF | 23) /* Alternate GPIO pin functions */ -#define PB4_AF_MSHC_DATA0 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 4) -#define PB5_AF_MSHC_DATA1 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 5) -#define PB6_AF_MSHC_DATA2 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 6) -#define PB7_AF_MSHC_DATA4 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 7) -#define PB8_AF_MSHC_BS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 8) -#define PB9_AF_MSHC_SCLK (GPIO_PORTB | GPIO_AF | GPIO_OUT | 9) -#define PB10_AF_UART6_TXD (GPIO_PORTB | GPIO_AF | GPIO_OUT | 10) -#define PB11_AF_UART6_RXD (GPIO_PORTB | GPIO_AF | GPIO_IN | 11) -#define PB12_AF_UART6_CTS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 12) -#define PB13_AF_UART6_RTS (GPIO_PORTB | GPIO_AF | GPIO_IN | 13) -#define PB18_AF_UART5_TXD (GPIO_PORTB | GPIO_AF | GPIO_OUT | 18) -#define PB19_AF_UART5_RXD (GPIO_PORTB | GPIO_AF | GPIO_IN | 19) -#define PB20_AF_UART5_CTS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 20) -#define PB21_AF_UART5_RTS (GPIO_PORTB | GPIO_AF | GPIO_IN | 21) -#define PC8_AF_FEC_MDIO (GPIO_PORTC | GPIO_AF | GPIO_IN | 8) -#define PC24_AF_GPT5_TOUT (GPIO_PORTC | GPIO_AF | 24) -#define PC26_AF_GPT4_TOUT (GPIO_PORTC | GPIO_AF | 26) -#define PD1_AF_ETMTRACE_PKT15 (GPIO_PORTD | GPIO_AF | 1) -#define PD6_AF_ETMTRACE_PKT14 (GPIO_PORTD | GPIO_AF | 6) -#define PD7_AF_ETMTRACE_PKT13 (GPIO_PORTD | GPIO_AF | 7) -#define PD9_AF_ETMTRACE_PKT12 (GPIO_PORTD | GPIO_AF | 9) -#define PD2_AF_SD3_D0 (GPIO_PORTD | GPIO_AF | 2) -#define PD3_AF_SD3_D1 (GPIO_PORTD | GPIO_AF | 3) -#define PD4_AF_SD3_D2 (GPIO_PORTD | GPIO_AF | 4) -#define PD5_AF_SD3_D3 (GPIO_PORTD | GPIO_AF | 5) -#define PD8_AF_FEC_MDIO (GPIO_PORTD | GPIO_AF | GPIO_IN | 8) -#define PD10_AF_ETMTRACE_PKT11 (GPIO_PORTD | GPIO_AF | 10) -#define PD11_AF_ETMTRACE_PKT10 (GPIO_PORTD | GPIO_AF | 11) -#define PD12_AF_ETMTRACE_PKT9 (GPIO_PORTD | GPIO_AF | 12) -#define PD13_AF_ETMTRACE_PKT8 (GPIO_PORTD | GPIO_AF | 13) -#define PD14_AF_ETMTRACE_PKT7 (GPIO_PORTD | GPIO_AF | 14) -#define PD15_AF_ETMTRACE_PKT6 (GPIO_PORTD | GPIO_AF | 15) -#define PD16_AF_ETMTRACE_PKT5 (GPIO_PORTD | GPIO_AF | 16) -#define PF1_AF_ETMTRACE_PKT0 (GPIO_PORTF | GPIO_AF | 1) -#define PF3_AF_ETMTRACE_PKT2 (GPIO_PORTF | GPIO_AF | 3) -#define PF5_AF_ETMPIPESTAT11 (GPIO_PORTF | GPIO_AF | 5) -#define PF7_AF_ATA_BUFFER_EN (GPIO_PORTF | GPIO_AF | 7) -#define PF8_AF_ATA_IORDY (GPIO_PORTF | GPIO_AF | 8) -#define PF9_AF_ATA_INTRQ (GPIO_PORTF | GPIO_AF | 9) -#define PF10_AF_ATA_RESET (GPIO_PORTF | GPIO_AF | 10) -#define PF11_AF_ATA_DMACK (GPIO_PORTF | GPIO_AF | 11) -#define PF12_AF_ATA_DMAREQ (GPIO_PORTF | GPIO_AF | 12) -#define PF13_AF_ATA_DA0 (GPIO_PORTF | GPIO_AF | 13) -#define PF14_AF_ATA_DA1 (GPIO_PORTF | GPIO_AF | 14) -#define PF15_AF_ETMTRACE_SYNC (GPIO_PORTF | GPIO_AF | 15) -#define PF16_AF_ATA_DA2 (GPIO_PORTF | GPIO_AF | 16) -#define PF17_AF_ATA_CS0 (GPIO_PORTF | GPIO_AF | 17) -#define PF18_AF_ATA_CS1 (GPIO_PORTF | GPIO_AF | 18) -#define PF19_AF_ATA_DIOW (GPIO_PORTF | GPIO_AF | 19) -#define PF20_AF_ATA_DIOR (GPIO_PORTF | GPIO_AF | 20) -#define PF22_AF_ETMTRACE_CLK (GPIO_PORTF | GPIO_AF | 22) -#define PF23_AF_ETMTRACE_PKT4 (GPIO_PORTF | GPIO_AF | 23) +#define PB4_AF_MSHC_DATA0 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 4) +#define PB5_AF_MSHC_DATA1 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 5) +#define PB6_AF_MSHC_DATA2 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 6) +#define PB7_AF_MSHC_DATA4 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 7) +#define PB8_AF_MSHC_BS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 8) +#define PB9_AF_MSHC_SCLK (GPIO_PORTB | GPIO_AF | GPIO_OUT | 9) +#define PB10_AF_UART6_TXD (GPIO_PORTB | GPIO_AF | GPIO_OUT | 10) +#define PB11_AF_UART6_RXD (GPIO_PORTB | GPIO_AF | GPIO_IN | 11) +#define PB12_AF_UART6_CTS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 12) +#define PB13_AF_UART6_RTS (GPIO_PORTB | GPIO_AF | GPIO_IN | 13) +#define PB18_AF_UART5_TXD (GPIO_PORTB | GPIO_AF | GPIO_OUT | 18) +#define PB19_AF_UART5_RXD (GPIO_PORTB | GPIO_AF | GPIO_IN | 19) +#define PB20_AF_UART5_CTS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 20) +#define PB21_AF_UART5_RTS (GPIO_PORTB | GPIO_AF | GPIO_IN | 21) +#define PC8_AF_FEC_MDIO (GPIO_PORTC | GPIO_AF | GPIO_IN | 8) +#define PC24_AF_GPT5_TOUT (GPIO_PORTC | GPIO_AF | 24) +#define PC25_AF_GPT5_TIN (GPIO_PORTC | GPIO_AF | 25) +#define PC26_AF_GPT4_TOUT (GPIO_PORTC | GPIO_AF | 26) +#define PC27_AF_GPT4_TIN (GPIO_PORTC | GPIO_AF | 27) +#define PD1_AF_ETMTRACE_PKT15 (GPIO_PORTD | GPIO_AF | 1) +#define PD6_AF_ETMTRACE_PKT14 (GPIO_PORTD | GPIO_AF | 6) +#define PD7_AF_ETMTRACE_PKT13 (GPIO_PORTD | GPIO_AF | 7) +#define PD9_AF_ETMTRACE_PKT12 (GPIO_PORTD | GPIO_AF | 9) +#define PD2_AF_SD3_D0 (GPIO_PORTD | GPIO_AF | 2) +#define PD3_AF_SD3_D1 (GPIO_PORTD | GPIO_AF | 3) +#define PD4_AF_SD3_D2 (GPIO_PORTD | GPIO_AF | 4) +#define PD5_AF_SD3_D3 (GPIO_PORTD | GPIO_AF | 5) +#define PD8_AF_FEC_MDIO (GPIO_PORTD | GPIO_AF | GPIO_IN | 8) +#define PD10_AF_ETMTRACE_PKT11 (GPIO_PORTD | GPIO_AF | 10) +#define PD11_AF_ETMTRACE_PKT10 (GPIO_PORTD | GPIO_AF | 11) +#define PD12_AF_ETMTRACE_PKT9 (GPIO_PORTD | GPIO_AF | 12) +#define PD13_AF_ETMTRACE_PKT8 (GPIO_PORTD | GPIO_AF | 13) +#define PD14_AF_ETMTRACE_PKT7 (GPIO_PORTD | GPIO_AF | 14) +#define PD15_AF_ETMTRACE_PKT6 (GPIO_PORTD | GPIO_AF | 15) +#define PD16_AF_ETMTRACE_PKT5 (GPIO_PORTD | GPIO_AF | 16) +#define PF1_AF_ETMTRACE_PKT0 (GPIO_PORTF | GPIO_AF | 1) +#define PF3_AF_ETMTRACE_PKT2 (GPIO_PORTF | GPIO_AF | 3) +#define PF5_AF_ETMPIPESTAT11 (GPIO_PORTF | GPIO_AF | 5) +#define PF7_AF_ATA_BUFFER_EN (GPIO_PORTF | GPIO_AF | 7) +#define PF8_AF_ATA_IORDY (GPIO_PORTF | GPIO_AF | 8) +#define PF9_AF_ATA_INTRQ (GPIO_PORTF | GPIO_AF | 9) +#define PF10_AF_ATA_RESET (GPIO_PORTF | GPIO_AF | 10) +#define PF11_AF_ATA_DMACK (GPIO_PORTF | GPIO_AF | 11) +#define PF12_AF_ATA_DMAREQ (GPIO_PORTF | GPIO_AF | 12) +#define PF13_AF_ATA_DA0 (GPIO_PORTF | GPIO_AF | 13) +#define PF14_AF_ATA_DA1 (GPIO_PORTF | GPIO_AF | 14) +#define PF15_AF_ETMTRACE_SYNC (GPIO_PORTF | GPIO_AF | 15) +#define PF16_AF_ATA_DA2 (GPIO_PORTF | GPIO_AF | 16) +#define PF17_AF_ATA_CS0 (GPIO_PORTF | GPIO_AF | 17) +#define PF18_AF_ATA_CS1 (GPIO_PORTF | GPIO_AF | 18) +#define PF19_AF_ATA_DIOW (GPIO_PORTF | GPIO_AF | 19) +#define PF20_AF_ATA_DIOR (GPIO_PORTF | GPIO_AF | 20) +#define PF22_AF_ETMTRACE_CLK (GPIO_PORTF | GPIO_AF | 22) +#define PF23_AF_ETMTRACE_PKT4 (GPIO_PORTF | GPIO_AF | 23) /* AIN GPIO pin functions */ -#define PC14_AIN_SSI1_MCLK (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14) -#define PC15_AIN_GPT6_TOUT (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 15) -#define PD0_AIN_FEC_TXD0 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 0) -#define PD1_AIN_FEC_TXD1 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 1) -#define PD2_AIN_FEC_TXD2 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 2) -#define PD3_AIN_FEC_TXD3 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 3) -#define PD9_AIN_FEC_MDC (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 9) -#define PD16_AIN_FEC_TX_ER (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 16) -#define PD27_AIN_EXT_DMA_GRANT (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 27) -#define PF23_AIN_FEC_TX_EN (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 23) +#define PC14_AIN_SSI1_MCLK (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14) +#define PC15_AIN_GPT6_TOUT (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 15) +#define PD0_AIN_FEC_TXD0 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 0) +#define PD1_AIN_FEC_TXD1 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 1) +#define PD2_AIN_FEC_TXD2 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 2) +#define PD3_AIN_FEC_TXD3 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 3) +#define PD9_AIN_FEC_MDC (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 9) +#define PD16_AIN_FEC_TX_ER (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 16) +#define PD27_AIN_EXT_DMA_GRANT (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 27) +#define PF23_AIN_FEC_TX_EN (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 23) /* BIN GPIO pin functions */ -#define PC14_BIN_SSI2_MCLK (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14) +#define PC14_BIN_SSI2_MCLK (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14) /* CIN GPIO pin functions */ -#define PD2_CIN_SLCDC1_DAT0 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 2) -#define PD3_CIN_SLCDC1_DAT1 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 3) -#define PD4_CIN_SLCDC1_DAT2 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 4) -#define PD5_CIN_SLCDC1_DAT3 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 5) -#define PD6_CIN_SLCDC1_DAT4 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 6) -#define PD7_CIN_SLCDC1_DAT5 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 7) -#define PD8_CIN_SLCDC1_DAT6 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 8) -#define PD9_CIN_SLCDC1_DAT7 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 9) -#define PD10_CIN_SLCDC1_DAT8 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 10) -#define PD11_CIN_SLCDC1_DAT9 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 11) -#define PD12_CIN_SLCDC1_DAT10 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 12) -#define PD13_CIN_SLCDC1_DAT11 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 13) -#define PD14_CIN_SLCDC1_DAT12 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 14) -#define PD15_CIN_SLCDC1_DAT13 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 15) -#define PD16_CIN_SLCDC1_DAT14 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 16) -#define PD23_CIN_SLCDC1_DAT15 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 23) -#define PF27_CIN_EXT_DMA_GRANT (GPIO_PORTF | GPIO_CIN | GPIO_OUT | 27) +#define PD2_CIN_SLCDC1_DAT0 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 2) +#define PD3_CIN_SLCDC1_DAT1 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 3) +#define PD4_CIN_SLCDC1_DAT2 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 4) +#define PD5_CIN_SLCDC1_DAT3 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 5) +#define PD6_CIN_SLCDC1_DAT4 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 6) +#define PD7_CIN_SLCDC1_DAT5 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 7) +#define PD8_CIN_SLCDC1_DAT6 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 8) +#define PD9_CIN_SLCDC1_DAT7 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 9) +#define PD10_CIN_SLCDC1_DAT8 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 10) +#define PD11_CIN_SLCDC1_DAT9 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 11) +#define PD12_CIN_SLCDC1_DAT10 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 12) +#define PD13_CIN_SLCDC1_DAT11 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 13) +#define PD14_CIN_SLCDC1_DAT12 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 14) +#define PD15_CIN_SLCDC1_DAT13 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 15) +#define PD16_CIN_SLCDC1_DAT14 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 16) +#define PD23_CIN_SLCDC1_DAT15 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 23) +#define PF27_CIN_EXT_DMA_GRANT (GPIO_PORTF | GPIO_CIN | GPIO_OUT | 27) /* LCDC_TESTx on PBxx omitted, because it's not clear what they do */ /* AOUT GPIO pin functions */ -#define PC14_AOUT_GPT6_TIN (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 14) -#define PD4_AOUT_FEC_RX_ER (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 4) -#define PD5_AOUT_FEC_RXD1 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 5) -#define PD6_AOUT_FEC_RXD2 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 6) -#define PD7_AOUT_FEC_RXD3 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 7) -#define PD10_AOUT_FEC_CRS (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 10) -#define PD11_AOUT_FEC_TX_CLK (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 11) -#define PD12_AOUT_FEC_RXD0 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 12) -#define PD13_AOUT_FEC_RX_DV (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 13) -#define PD14_AOUT_FEC_RX_CLK (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 14) -#define PD15_AOUT_FEC_COL (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 15) - -#define PC17_BOUT_PC_IOIS16 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 17) -#define PC18_BOUT_PC_BVD2 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 18) -#define PC19_BOUT_PC_BVD1 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 19) -#define PC28_BOUT_PC_BVD2 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 28) -#define PC29_BOUT_PC_VS1 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 29) -#define PC30_BOUT_PC_READY (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 30) -#define PC31_BOUT_PC_WAIT (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 31) - - -#endif /* _MXC_GPIO_MX1_MX2_H */ +#define PC14_AOUT_GPT6_TIN (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 14) +#define PD4_AOUT_FEC_RX_ER (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 4) +#define PD5_AOUT_FEC_RXD1 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 5) +#define PD6_AOUT_FEC_RXD2 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 6) +#define PD7_AOUT_FEC_RXD3 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 7) +#define PD10_AOUT_FEC_CRS (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 10) +#define PD11_AOUT_FEC_TX_CLK (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 11) +#define PD12_AOUT_FEC_RXD0 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 12) +#define PD13_AOUT_FEC_RX_DV (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 13) +#define PD14_AOUT_FEC_RX_CLK (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 14) +#define PD15_AOUT_FEC_COL (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 15) + +/* BOUT GPIO pin functions */ + +#define PC17_BOUT_PC_IOIS16 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 17) +#define PC18_BOUT_PC_BVD2 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 18) +#define PC19_BOUT_PC_BVD1 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 19) +#define PC28_BOUT_PC_BVD2 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 28) +#define PC29_BOUT_PC_VS1 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 29) +#define PC30_BOUT_PC_READY (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 30) +#define PC31_BOUT_PC_WAIT (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 31) + +#endif /* __MACH_IOMUX_MX27_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx2x.h b/arch/arm/plat-mxc/include/mach/iomux-mx2x.h index fb5ae638e79..c4f116d214f 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx2x.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx2x.h @@ -1,237 +1,230 @@ /* -* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> -* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de> -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License -* as published by the Free Software Foundation; either version 2 -* of the License, or (at your option) any later version. -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program; if not, write to the Free Software -* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, -* MA 02110-1301, USA. -*/ - -#ifndef _MXC_IOMUX_MX2x_H -#define _MXC_IOMUX_MX2x_H - -#ifndef GPIO_PORTA -#error Please include mach/iomux.h -#endif - + * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> + * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ +#ifndef __MACH_IOMUX_MX2x_H__ +#define __MACH_IOMUX_MX2x_H__ /* Primary GPIO pin functions */ -#define PA5_PF_LSCLK (GPIO_PORTA | GPIO_PF | GPIO_OUT | 5) -#define PA6_PF_LD0 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 6) -#define PA7_PF_LD1 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 7) -#define PA8_PF_LD2 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 8) -#define PA9_PF_LD3 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 9) -#define PA10_PF_LD4 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 10) -#define PA11_PF_LD5 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 11) -#define PA12_PF_LD6 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 12) -#define PA13_PF_LD7 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 13) -#define PA14_PF_LD8 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 14) -#define PA15_PF_LD9 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 15) -#define PA16_PF_LD10 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 16) -#define PA17_PF_LD11 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 17) -#define PA18_PF_LD12 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 18) -#define PA19_PF_LD13 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 19) -#define PA20_PF_LD14 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 20) -#define PA21_PF_LD15 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 21) -#define PA22_PF_LD16 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 22) -#define PA23_PF_LD17 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 23) -#define PA24_PF_REV (GPIO_PORTA | GPIO_PF | GPIO_OUT | 24) -#define PA25_PF_CLS (GPIO_PORTA | GPIO_PF | GPIO_OUT | 25) -#define PA26_PF_PS (GPIO_PORTA | GPIO_PF | GPIO_OUT | 26) -#define PA27_PF_SPL_SPR (GPIO_PORTA | GPIO_PF | GPIO_OUT | 27) -#define PA28_PF_HSYNC (GPIO_PORTA | GPIO_PF | GPIO_OUT | 28) -#define PA29_PF_VSYNC (GPIO_PORTA | GPIO_PF | GPIO_OUT | 29) -#define PA30_PF_CONTRAST (GPIO_PORTA | GPIO_PF | GPIO_OUT | 30) -#define PA31_PF_OE_ACD (GPIO_PORTA | GPIO_PF | GPIO_OUT | 31) -#define PB4_PF_SD2_D0 (GPIO_PORTB | GPIO_PF | 4) -#define PB5_PF_SD2_D1 (GPIO_PORTB | GPIO_PF | 5) -#define PB6_PF_SD2_D2 (GPIO_PORTB | GPIO_PF | 6) -#define PB7_PF_SD2_D3 (GPIO_PORTB | GPIO_PF | 7) -#define PB8_PF_SD2_CMD (GPIO_PORTB | GPIO_PF | 8) -#define PB9_PF_SD2_CLK (GPIO_PORTB | GPIO_PF | 9) -#define PB10_PF_CSI_D0 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 10) -#define PB11_PF_CSI_D1 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 11) -#define PB12_PF_CSI_D2 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 12) -#define PB13_PF_CSI_D3 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 13) -#define PB14_PF_CSI_D4 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 14) -#define PB15_PF_CSI_MCLK (GPIO_PORTB | GPIO_PF | GPIO_OUT | 15) -#define PB16_PF_CSI_PIXCLK (GPIO_PORTB | GPIO_PF | GPIO_OUT | 16) -#define PB17_PF_CSI_D5 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 17) -#define PB18_PF_CSI_D6 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 18) -#define PB19_PF_CSI_D7 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 19) -#define PB20_PF_CSI_VSYNC (GPIO_PORTB | GPIO_PF | GPIO_OUT | 20) -#define PB21_PF_CSI_HSYNC (GPIO_PORTB | GPIO_PF | GPIO_OUT | 21) -#define PB23_PF_USB_PWR (GPIO_PORTB | GPIO_PF | 23) -#define PB24_PF_USB_OC (GPIO_PORTB | GPIO_PF | 24) -#define PB26_PF_USBH1_FS (GPIO_PORTB | GPIO_PF | 26) -#define PB27_PF_USBH1_OE (GPIO_PORTB | GPIO_PF | 27) -#define PB28_PF_USBH1_TXDM (GPIO_PORTB | GPIO_PF | 28) -#define PB29_PF_USBH1_TXDP (GPIO_PORTB | GPIO_PF | 29) -#define PB30_PF_USBH1_RXDM (GPIO_PORTB | GPIO_PF | 30) -#define PB31_PF_USBH1_RXDP (GPIO_PORTB | GPIO_PF | 31) -#define PC14_PF_TOUT (GPIO_PORTC | GPIO_PF | 14) -#define PC15_PF_TIN (GPIO_PORTC | GPIO_PF | 15) -#define PC20_PF_SSI1_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 20) -#define PC21_PF_SSI1_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 21) -#define PC22_PF_SSI1_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 22) -#define PC23_PF_SSI1_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 23) -#define PC24_PF_SSI2_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 24) -#define PC25_PF_SSI2_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 25) -#define PC26_PF_SSI2_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 26) -#define PC27_PF_SSI2_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 27) -#define PC28_PF_SSI3_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 28) -#define PC29_PF_SSI3_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 29) -#define PC30_PF_SSI3_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 30) -#define PC31_PF_SSI3_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 31) -#define PD17_PF_I2C_DATA (GPIO_PORTD | GPIO_PF | GPIO_OUT | 17) -#define PD18_PF_I2C_CLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 18) -#define PD19_PF_CSPI2_SS2 (GPIO_PORTD | GPIO_PF | 19) -#define PD20_PF_CSPI2_SS1 (GPIO_PORTD | GPIO_PF | 20) -#define PD21_PF_CSPI2_SS0 (GPIO_PORTD | GPIO_PF | 21) -#define PD22_PF_CSPI2_SCLK (GPIO_PORTD | GPIO_PF | 22) -#define PD23_PF_CSPI2_MISO (GPIO_PORTD | GPIO_PF | 23) -#define PD24_PF_CSPI2_MOSI (GPIO_PORTD | GPIO_PF | 24) -#define PD25_PF_CSPI1_RDY (GPIO_PORTD | GPIO_PF | GPIO_OUT | 25) -#define PD26_PF_CSPI1_SS2 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 26) -#define PD27_PF_CSPI1_SS1 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 27) -#define PD28_PF_CSPI1_SS0 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 28) -#define PD29_PF_CSPI1_SCLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 29) -#define PD30_PF_CSPI1_MISO (GPIO_PORTD | GPIO_PF | GPIO_IN | 30) -#define PD31_PF_CSPI1_MOSI (GPIO_PORTD | GPIO_PF | GPIO_OUT | 31) -#define PE3_PF_UART2_CTS (GPIO_PORTE | GPIO_PF | GPIO_OUT | 3) -#define PE4_PF_UART2_RTS (GPIO_PORTE | GPIO_PF | GPIO_IN | 4) -#define PE5_PF_PWMO (GPIO_PORTE | GPIO_PF | 5) -#define PE6_PF_UART2_TXD (GPIO_PORTE | GPIO_PF | GPIO_OUT | 6) -#define PE7_PF_UART2_RXD (GPIO_PORTE | GPIO_PF | GPIO_IN | 7) -#define PE8_PF_UART3_TXD (GPIO_PORTE | GPIO_PF | GPIO_OUT | 8) -#define PE9_PF_UART3_RXD (GPIO_PORTE | GPIO_PF | GPIO_IN | 9) -#define PE10_PF_UART3_CTS (GPIO_PORTE | GPIO_PF | GPIO_OUT | 10) -#define PE11_PF_UART3_RTS (GPIO_PORTE | GPIO_PF | GPIO_IN | 11) -#define PE12_PF_UART1_TXD (GPIO_PORTE | GPIO_PF | GPIO_OUT | 12) -#define PE13_PF_UART1_RXD (GPIO_PORTE | GPIO_PF | GPIO_IN | 13) -#define PE14_PF_UART1_CTS (GPIO_PORTE | GPIO_PF | GPIO_OUT | 14) -#define PE15_PF_UART1_RTS (GPIO_PORTE | GPIO_PF | GPIO_IN | 15) -#define PE16_PF_RTCK (GPIO_PORTE | GPIO_PF | GPIO_OUT | 16) -#define PE17_PF_RESET_OUT (GPIO_PORTE | GPIO_PF | 17) -#define PE18_PF_SD1_D0 (GPIO_PORTE | GPIO_PF | 18) -#define PE19_PF_SD1_D1 (GPIO_PORTE | GPIO_PF | 19) -#define PE20_PF_SD1_D2 (GPIO_PORTE | GPIO_PF | 20) -#define PE21_PF_SD1_D3 (GPIO_PORTE | GPIO_PF | 21) -#define PE22_PF_SD1_CMD (GPIO_PORTE | GPIO_PF | 22) -#define PE23_PF_SD1_CLK (GPIO_PORTE | GPIO_PF | 23) -#define PF0_PF_NRFB (GPIO_PORTF | GPIO_PF | 0) -#define PF2_PF_NFWP (GPIO_PORTF | GPIO_PF | 2) -#define PF4_PF_NFALE (GPIO_PORTF | GPIO_PF | 4) -#define PF5_PF_NFRE (GPIO_PORTF | GPIO_PF | 5) -#define PF6_PF_NFWE (GPIO_PORTF | GPIO_PF | 6) -#define PF15_PF_CLKO (GPIO_PORTF | GPIO_PF | 15) -#define PF21_PF_CS4 (GPIO_PORTF | GPIO_PF | 21) -#define PF22_PF_CS5 (GPIO_PORTF | GPIO_PF | 22) +#define PA5_PF_LSCLK (GPIO_PORTA | GPIO_PF | GPIO_OUT | 5) +#define PA6_PF_LD0 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 6) +#define PA7_PF_LD1 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 7) +#define PA8_PF_LD2 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 8) +#define PA9_PF_LD3 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 9) +#define PA10_PF_LD4 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 10) +#define PA11_PF_LD5 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 11) +#define PA12_PF_LD6 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 12) +#define PA13_PF_LD7 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 13) +#define PA14_PF_LD8 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 14) +#define PA15_PF_LD9 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 15) +#define PA16_PF_LD10 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 16) +#define PA17_PF_LD11 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 17) +#define PA18_PF_LD12 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 18) +#define PA19_PF_LD13 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 19) +#define PA20_PF_LD14 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 20) +#define PA21_PF_LD15 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 21) +#define PA22_PF_LD16 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 22) +#define PA23_PF_LD17 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 23) +#define PA24_PF_REV (GPIO_PORTA | GPIO_PF | GPIO_OUT | 24) +#define PA25_PF_CLS (GPIO_PORTA | GPIO_PF | GPIO_OUT | 25) +#define PA26_PF_PS (GPIO_PORTA | GPIO_PF | GPIO_OUT | 26) +#define PA27_PF_SPL_SPR (GPIO_PORTA | GPIO_PF | GPIO_OUT | 27) +#define PA28_PF_HSYNC (GPIO_PORTA | GPIO_PF | GPIO_OUT | 28) +#define PA29_PF_VSYNC (GPIO_PORTA | GPIO_PF | GPIO_OUT | 29) +#define PA30_PF_CONTRAST (GPIO_PORTA | GPIO_PF | GPIO_OUT | 30) +#define PA31_PF_OE_ACD (GPIO_PORTA | GPIO_PF | GPIO_OUT | 31) +#define PB4_PF_SD2_D0 (GPIO_PORTB | GPIO_PF | 4) +#define PB5_PF_SD2_D1 (GPIO_PORTB | GPIO_PF | 5) +#define PB6_PF_SD2_D2 (GPIO_PORTB | GPIO_PF | 6) +#define PB7_PF_SD2_D3 (GPIO_PORTB | GPIO_PF | 7) +#define PB8_PF_SD2_CMD (GPIO_PORTB | GPIO_PF | 8) +#define PB9_PF_SD2_CLK (GPIO_PORTB | GPIO_PF | 9) +#define PB10_PF_CSI_D0 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 10) +#define PB11_PF_CSI_D1 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 11) +#define PB12_PF_CSI_D2 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 12) +#define PB13_PF_CSI_D3 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 13) +#define PB14_PF_CSI_D4 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 14) +#define PB15_PF_CSI_MCLK (GPIO_PORTB | GPIO_PF | GPIO_OUT | 15) +#define PB16_PF_CSI_PIXCLK (GPIO_PORTB | GPIO_PF | GPIO_OUT | 16) +#define PB17_PF_CSI_D5 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 17) +#define PB18_PF_CSI_D6 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 18) +#define PB19_PF_CSI_D7 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 19) +#define PB20_PF_CSI_VSYNC (GPIO_PORTB | GPIO_PF | GPIO_OUT | 20) +#define PB21_PF_CSI_HSYNC (GPIO_PORTB | GPIO_PF | GPIO_OUT | 21) +#define PB23_PF_USB_PWR (GPIO_PORTB | GPIO_PF | 23) +#define PB24_PF_USB_OC (GPIO_PORTB | GPIO_PF | 24) +#define PB26_PF_USBH1_FS (GPIO_PORTB | GPIO_PF | 26) +#define PB27_PF_USBH1_OE (GPIO_PORTB | GPIO_PF | 27) +#define PB28_PF_USBH1_TXDM (GPIO_PORTB | GPIO_PF | 28) +#define PB29_PF_USBH1_TXDP (GPIO_PORTB | GPIO_PF | 29) +#define PB30_PF_USBH1_RXDM (GPIO_PORTB | GPIO_PF | 30) +#define PB31_PF_USBH1_RXDP (GPIO_PORTB | GPIO_PF | 31) +#define PC14_PF_TOUT (GPIO_PORTC | GPIO_PF | 14) +#define PC15_PF_TIN (GPIO_PORTC | GPIO_PF | 15) +#define PC20_PF_SSI1_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 20) +#define PC21_PF_SSI1_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 21) +#define PC22_PF_SSI1_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 22) +#define PC23_PF_SSI1_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 23) +#define PC24_PF_SSI2_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 24) +#define PC25_PF_SSI2_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 25) +#define PC26_PF_SSI2_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 26) +#define PC27_PF_SSI2_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 27) +#define PC28_PF_SSI3_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 28) +#define PC29_PF_SSI3_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 29) +#define PC30_PF_SSI3_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 30) +#define PC31_PF_SSI3_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 31) +#define PD17_PF_I2C_DATA (GPIO_PORTD | GPIO_PF | GPIO_OUT | 17) +#define PD18_PF_I2C_CLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 18) +#define PD19_PF_CSPI2_SS2 (GPIO_PORTD | GPIO_PF | 19) +#define PD20_PF_CSPI2_SS1 (GPIO_PORTD | GPIO_PF | 20) +#define PD21_PF_CSPI2_SS0 (GPIO_PORTD | GPIO_PF | 21) +#define PD22_PF_CSPI2_SCLK (GPIO_PORTD | GPIO_PF | 22) +#define PD23_PF_CSPI2_MISO (GPIO_PORTD | GPIO_PF | 23) +#define PD24_PF_CSPI2_MOSI (GPIO_PORTD | GPIO_PF | 24) +#define PD25_PF_CSPI1_RDY (GPIO_PORTD | GPIO_PF | GPIO_OUT | 25) +#define PD26_PF_CSPI1_SS2 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 26) +#define PD27_PF_CSPI1_SS1 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 27) +#define PD28_PF_CSPI1_SS0 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 28) +#define PD29_PF_CSPI1_SCLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 29) +#define PD30_PF_CSPI1_MISO (GPIO_PORTD | GPIO_PF | GPIO_IN | 30) +#define PD31_PF_CSPI1_MOSI (GPIO_PORTD | GPIO_PF | GPIO_OUT | 31) +#define PE3_PF_UART2_CTS (GPIO_PORTE | GPIO_PF | GPIO_OUT | 3) +#define PE4_PF_UART2_RTS (GPIO_PORTE | GPIO_PF | GPIO_IN | 4) +#define PE5_PF_PWMO (GPIO_PORTE | GPIO_PF | 5) +#define PE6_PF_UART2_TXD (GPIO_PORTE | GPIO_PF | GPIO_OUT | 6) +#define PE7_PF_UART2_RXD (GPIO_PORTE | GPIO_PF | GPIO_IN | 7) +#define PE8_PF_UART3_TXD (GPIO_PORTE | GPIO_PF | GPIO_OUT | 8) +#define PE9_PF_UART3_RXD (GPIO_PORTE | GPIO_PF | GPIO_IN | 9) +#define PE10_PF_UART3_CTS (GPIO_PORTE | GPIO_PF | GPIO_OUT | 10) +#define PE11_PF_UART3_RTS (GPIO_PORTE | GPIO_PF | GPIO_IN | 11) +#define PE12_PF_UART1_TXD (GPIO_PORTE | GPIO_PF | GPIO_OUT | 12) +#define PE13_PF_UART1_RXD (GPIO_PORTE | GPIO_PF | GPIO_IN | 13) +#define PE14_PF_UART1_CTS (GPIO_PORTE | GPIO_PF | GPIO_OUT | 14) +#define PE15_PF_UART1_RTS (GPIO_PORTE | GPIO_PF | GPIO_IN | 15) +#define PE16_PF_RTCK (GPIO_PORTE | GPIO_PF | GPIO_OUT | 16) +#define PE17_PF_RESET_OUT (GPIO_PORTE | GPIO_PF | 17) +#define PE18_PF_SD1_D0 (GPIO_PORTE | GPIO_PF | 18) +#define PE19_PF_SD1_D1 (GPIO_PORTE | GPIO_PF | 19) +#define PE20_PF_SD1_D2 (GPIO_PORTE | GPIO_PF | 20) +#define PE21_PF_SD1_D3 (GPIO_PORTE | GPIO_PF | 21) +#define PE22_PF_SD1_CMD (GPIO_PORTE | GPIO_PF | 22) +#define PE23_PF_SD1_CLK (GPIO_PORTE | GPIO_PF | 23) +#define PF0_PF_NRFB (GPIO_PORTF | GPIO_PF | 0) +#define PF2_PF_NFWP (GPIO_PORTF | GPIO_PF | 2) +#define PF4_PF_NFALE (GPIO_PORTF | GPIO_PF | 4) +#define PF5_PF_NFRE (GPIO_PORTF | GPIO_PF | 5) +#define PF6_PF_NFWE (GPIO_PORTF | GPIO_PF | 6) +#define PF15_PF_CLKO (GPIO_PORTF | GPIO_PF | 15) +#define PF21_PF_CS4 (GPIO_PORTF | GPIO_PF | 21) +#define PF22_PF_CS5 (GPIO_PORTF | GPIO_PF | 22) /* Alternate GPIO pin functions */ -#define PB26_AF_UART4_RTS (GPIO_PORTB | GPIO_AF | GPIO_IN | 26) -#define PB28_AF_UART4_TXD (GPIO_PORTB | GPIO_AF | GPIO_OUT | 28) -#define PB29_AF_UART4_CTS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 29) -#define PB31_AF_UART4_RXD (GPIO_PORTB | GPIO_AF | GPIO_IN | 31) -#define PC28_AF_SLCDC2_D0 (GPIO_PORTC | GPIO_AF | 28) -#define PC29_AF_SLCDC2_RS (GPIO_PORTC | GPIO_AF | 29) -#define PC30_AF_SLCDC2_CS (GPIO_PORTC | GPIO_AF | 30) -#define PC31_AF_SLCDC2_CLK (GPIO_PORTC | GPIO_AF | 31) -#define PD19_AF_USBH2_DATA4 (GPIO_PORTD | GPIO_AF | 19) -#define PD20_AF_USBH2_DATA3 (GPIO_PORTD | GPIO_AF | 20) -#define PD21_AF_USBH2_DATA6 (GPIO_PORTD | GPIO_AF | 21) -#define PD22_AF_USBH2_DATA0 (GPIO_PORTD | GPIO_AF | 22) -#define PD23_AF_USBH2_DATA2 (GPIO_PORTD | GPIO_AF | 23) -#define PD24_AF_USBH2_DATA1 (GPIO_PORTD | GPIO_AF | 24) -#define PD26_AF_USBH2_DATA5 (GPIO_PORTD | GPIO_AF | 26) -#define PE0_AF_KP_COL6 (GPIO_PORTE | GPIO_AF | 0) -#define PE1_AF_KP_ROW6 (GPIO_PORTE | GPIO_AF | 1) -#define PE2_AF_KP_ROW7 (GPIO_PORTE | GPIO_AF | 2) -#define PE3_AF_KP_COL7 (GPIO_PORTE | GPIO_AF | 3) -#define PE4_AF_KP_ROW7 (GPIO_PORTE | GPIO_AF | 4) -#define PE6_AF_KP_COL6 (GPIO_PORTE | GPIO_AF | 6) -#define PE7_AF_KP_ROW6 (GPIO_PORTE | GPIO_AF | 7) -#define PE16_AF_OWIRE (GPIO_PORTE | GPIO_AF | 16) -#define PE18_AF_CSPI3_MISO (GPIO_PORTE | GPIO_AF | GPIO_IN | 18) -#define PE21_AF_CSPI3_SS (GPIO_PORTE | GPIO_AF | GPIO_OUT | 21) -#define PE22_AF_CSPI3_MOSI (GPIO_PORTE | GPIO_AF | GPIO_OUT | 22) -#define PE23_AF_CSPI3_SCLK (GPIO_PORTE | GPIO_AF | GPIO_OUT | 23) +#define PB26_AF_UART4_RTS (GPIO_PORTB | GPIO_AF | GPIO_IN | 26) +#define PB28_AF_UART4_TXD (GPIO_PORTB | GPIO_AF | GPIO_OUT | 28) +#define PB29_AF_UART4_CTS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 29) +#define PB31_AF_UART4_RXD (GPIO_PORTB | GPIO_AF | GPIO_IN | 31) +#define PC28_AF_SLCDC2_D0 (GPIO_PORTC | GPIO_AF | 28) +#define PC29_AF_SLCDC2_RS (GPIO_PORTC | GPIO_AF | 29) +#define PC30_AF_SLCDC2_CS (GPIO_PORTC | GPIO_AF | 30) +#define PC31_AF_SLCDC2_CLK (GPIO_PORTC | GPIO_AF | 31) +#define PD19_AF_USBH2_DATA4 (GPIO_PORTD | GPIO_AF | 19) +#define PD20_AF_USBH2_DATA3 (GPIO_PORTD | GPIO_AF | 20) +#define PD21_AF_USBH2_DATA6 (GPIO_PORTD | GPIO_AF | 21) +#define PD22_AF_USBH2_DATA0 (GPIO_PORTD | GPIO_AF | 22) +#define PD23_AF_USBH2_DATA2 (GPIO_PORTD | GPIO_AF | 23) +#define PD24_AF_USBH2_DATA1 (GPIO_PORTD | GPIO_AF | 24) +#define PD26_AF_USBH2_DATA5 (GPIO_PORTD | GPIO_AF | 26) +#define PE0_AF_KP_COL6 (GPIO_PORTE | GPIO_AF | 0) +#define PE1_AF_KP_ROW6 (GPIO_PORTE | GPIO_AF | 1) +#define PE2_AF_KP_ROW7 (GPIO_PORTE | GPIO_AF | 2) +#define PE3_AF_KP_COL7 (GPIO_PORTE | GPIO_AF | 3) +#define PE4_AF_KP_ROW7 (GPIO_PORTE | GPIO_AF | 4) +#define PE6_AF_KP_COL6 (GPIO_PORTE | GPIO_AF | 6) +#define PE7_AF_KP_ROW6 (GPIO_PORTE | GPIO_AF | 7) +#define PE16_AF_OWIRE (GPIO_PORTE | GPIO_AF | 16) +#define PE18_AF_CSPI3_MISO (GPIO_PORTE | GPIO_AF | GPIO_IN | 18) +#define PE21_AF_CSPI3_SS (GPIO_PORTE | GPIO_AF | GPIO_OUT | 21) +#define PE22_AF_CSPI3_MOSI (GPIO_PORTE | GPIO_AF | GPIO_OUT | 22) +#define PE23_AF_CSPI3_SCLK (GPIO_PORTE | GPIO_AF | GPIO_OUT | 23) /* AIN GPIO pin functions */ -#define PA6_AIN_SLCDC1_DAT0 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 6) -#define PA7_AIN_SLCDC1_DAT1 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 7) -#define PA8_AIN_SLCDC1_DAT2 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 8) -#define PA0_AIN_SLCDC1_DAT3 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0) -#define PA11_AIN_SLCDC1_DAT5 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 11) -#define PA13_AIN_SLCDC1_DAT7 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 13) -#define PA15_AIN_SLCDC1_DAT9 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 15) -#define PA17_AIN_SLCDC1_DAT11 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17) -#define PA19_AIN_SLCDC1_DAT13 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 19) -#define PA21_AIN_SLCDC1_DAT15 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 21) -#define PA22_AIN_EXT_DMAGRANT (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 22) -#define PA24_AIN_SLCDC1_D0 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 24) -#define PA25_AIN_SLCDC1_RS (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 25) -#define PA26_AIN_SLCDC1_CS (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 26) -#define PA27_AIN_SLCDC1_CLK (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 27) -#define PB6_AIN_SLCDC1_D0 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 6) -#define PB7_AIN_SLCDC1_RS (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 7) -#define PB8_AIN_SLCDC1_CS (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 8) -#define PB9_AIN_SLCDC1_CLK (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 9) -#define PB25_AIN_SLCDC1_DAT0 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 25) -#define PB26_AIN_SLCDC1_DAT1 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 26) -#define PB27_AIN_SLCDC1_DAT2 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 27) -#define PB28_AIN_SLCDC1_DAT3 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 28) -#define PB29_AIN_SLCDC1_DAT4 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 29) -#define PB30_AIN_SLCDC1_DAT5 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 30) -#define PB31_AIN_SLCDC1_DAT6 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 31) -#define PC5_AIN_SLCDC1_DAT7 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 5) -#define PC6_AIN_SLCDC1_DAT8 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 6) -#define PC7_AIN_SLCDC1_DAT9 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 7) -#define PC8_AIN_SLCDC1_DAT10 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 8) -#define PC9_AIN_SLCDC1_DAT11 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 9) -#define PC10_AIN_SLCDC1_DAT12 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 10) -#define PC11_AIN_SLCDC1_DAT13 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 11) -#define PC12_AIN_SLCDC1_DAT14 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 12) -#define PC13_AIN_SLCDC1_DAT15 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 13) -#define PE5_AIN_PC_SPKOUT (GPIO_PORTE | GPIO_AIN | GPIO_OUT | 5) +#define PA6_AIN_SLCDC1_DAT0 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 6) +#define PA7_AIN_SLCDC1_DAT1 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 7) +#define PA8_AIN_SLCDC1_DAT2 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 8) +#define PA0_AIN_SLCDC1_DAT3 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0) +#define PA11_AIN_SLCDC1_DAT5 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 11) +#define PA13_AIN_SLCDC1_DAT7 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 13) +#define PA15_AIN_SLCDC1_DAT9 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 15) +#define PA17_AIN_SLCDC1_DAT11 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17) +#define PA19_AIN_SLCDC1_DAT13 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 19) +#define PA21_AIN_SLCDC1_DAT15 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 21) +#define PA22_AIN_EXT_DMAGRANT (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 22) +#define PA24_AIN_SLCDC1_D0 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 24) +#define PA25_AIN_SLCDC1_RS (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 25) +#define PA26_AIN_SLCDC1_CS (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 26) +#define PA27_AIN_SLCDC1_CLK (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 27) +#define PB6_AIN_SLCDC1_D0 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 6) +#define PB7_AIN_SLCDC1_RS (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 7) +#define PB8_AIN_SLCDC1_CS (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 8) +#define PB9_AIN_SLCDC1_CLK (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 9) +#define PB25_AIN_SLCDC1_DAT0 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 25) +#define PB26_AIN_SLCDC1_DAT1 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 26) +#define PB27_AIN_SLCDC1_DAT2 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 27) +#define PB28_AIN_SLCDC1_DAT3 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 28) +#define PB29_AIN_SLCDC1_DAT4 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 29) +#define PB30_AIN_SLCDC1_DAT5 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 30) +#define PB31_AIN_SLCDC1_DAT6 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 31) +#define PC5_AIN_SLCDC1_DAT7 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 5) +#define PC6_AIN_SLCDC1_DAT8 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 6) +#define PC7_AIN_SLCDC1_DAT9 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 7) +#define PC8_AIN_SLCDC1_DAT10 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 8) +#define PC9_AIN_SLCDC1_DAT11 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 9) +#define PC10_AIN_SLCDC1_DAT12 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 10) +#define PC11_AIN_SLCDC1_DAT13 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 11) +#define PC12_AIN_SLCDC1_DAT14 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 12) +#define PC13_AIN_SLCDC1_DAT15 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 13) +#define PE5_AIN_PC_SPKOUT (GPIO_PORTE | GPIO_AIN | GPIO_OUT | 5) /* BIN GPIO pin functions */ -#define PE5_BIN_TOUT2 (GPIO_PORTE | GPIO_BIN | GPIO_OUT | 5) +#define PE5_BIN_TOUT2 (GPIO_PORTE | GPIO_BIN | GPIO_OUT | 5) /* CIN GPIO pin functions */ -#define PA14_CIN_SLCDC1_DAT0 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 14) -#define PA15_CIN_SLCDC1_DAT1 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 15) -#define PA16_CIN_SLCDC1_DAT2 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 16) -#define PA17_CIN_SLCDC1_DAT3 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 17) -#define PA18_CIN_SLCDC1_DAT4 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 18) -#define PA19_CIN_SLCDC1_DAT5 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 19) -#define PA20_CIN_SLCDC1_DAT6 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 20) -#define PA21_CIN_SLCDC1_DAT7 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 21) -#define PB30_CIN_UART4_CTS (GPIO_PORTB | GPIO_CIN | GPIO_OUT | 30) -#define PE5_CIN_TOUT3 (GPIO_PORTE | GPIO_CIN | GPIO_OUT | 5) +#define PA14_CIN_SLCDC1_DAT0 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 14) +#define PA15_CIN_SLCDC1_DAT1 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 15) +#define PA16_CIN_SLCDC1_DAT2 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 16) +#define PA17_CIN_SLCDC1_DAT3 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 17) +#define PA18_CIN_SLCDC1_DAT4 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 18) +#define PA19_CIN_SLCDC1_DAT5 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 19) +#define PA20_CIN_SLCDC1_DAT6 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 20) +#define PA21_CIN_SLCDC1_DAT7 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 21) +#define PB30_CIN_UART4_CTS (GPIO_PORTB | GPIO_CIN | GPIO_OUT | 30) +#define PE5_CIN_TOUT3 (GPIO_PORTE | GPIO_CIN | GPIO_OUT | 5) /* AOUT GPIO pin functions */ -#define PB29_AOUT_UART4_RXD (GPIO_PORTB | GPIO_AOUT | GPIO_IN | 29) -#define PB31_AOUT_UART4_RTS (GPIO_PORTB | GPIO_AOUT | GPIO_IN | 31) +#define PB29_AOUT_UART4_RXD (GPIO_PORTB | GPIO_AOUT | GPIO_IN | 29) +#define PB31_AOUT_UART4_RTS (GPIO_PORTB | GPIO_AOUT | GPIO_IN | 31) #define PC8_AOUT_USBOTG_TXR_INT (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 8) -#define PC15_AOUT_WKGD (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 15) -#define PF21_AOUT_DTACK (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 21) - +#define PC15_AOUT_WKGD (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 15) +#define PF21_AOUT_DTACK (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 21) -#endif +#endif /* ifndef __MACH_IOMUX_MX2x_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h index e1fc6da1cd1..e51465d7b22 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h @@ -16,12 +16,10 @@ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, * MA 02110-1301, USA. */ - -#ifndef __MACH_MX31_IOMUX_H__ -#define __MACH_MX31_IOMUX_H__ +#ifndef __MACH_IOMUX_MX3_H__ +#define __MACH_IOMUX_MX3_H__ #include <linux/types.h> - /* * various IOMUX output functions */ @@ -34,7 +32,7 @@ #define IOMUX_OCONFIG_ALT4 (5 << 4) /* used as alternate function 4 */ #define IOMUX_OCONFIG_ALT5 (6 << 4) /* used as alternate function 5 */ #define IOMUX_OCONFIG_ALT6 (7 << 4) /* used as alternate function 6 */ -#define IOMUX_ICONFIG_NONE 0 /* not configured for input */ +#define IOMUX_ICONFIG_NONE 0 /* not configured for input */ #define IOMUX_ICONFIG_GPIO 1 /* used as GPIO */ #define IOMUX_ICONFIG_FUNC 2 /* used as function */ #define IOMUX_ICONFIG_ALT1 4 /* used as alternate function 1 */ @@ -167,11 +165,6 @@ int mxc_iomux_mode(unsigned int pin_mode); MXC_GPIO_IRQ_START) /* - * The number of gpio devices among the pads - */ -#define GPIO_PORT_MAX 3 - -/* * This enumeration is constructed based on the Section * "sw_pad_ctl & sw_mux_ctl details" of the MX31 IC Spec. Each enumerated * value is constructed based on the rules described above. @@ -633,40 +626,40 @@ enum iomux_pins { #define MX31_PIN_TXD2__GPIO1_28 IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO) #define MX31_PIN_CSI_D4__GPIO3_4 IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_GPIO) #define MX31_PIN_CSI_D5__GPIO3_5 IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO) -#define MX31_PIN_USBOTG_DATA0__USBOTG_DATA0 IOMUX_MODE(MX31_PIN_USBOTG_DATA0, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBOTG_DATA1__USBOTG_DATA1 IOMUX_MODE(MX31_PIN_USBOTG_DATA1, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBOTG_DATA2__USBOTG_DATA2 IOMUX_MODE(MX31_PIN_USBOTG_DATA2, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBOTG_DATA3__USBOTG_DATA3 IOMUX_MODE(MX31_PIN_USBOTG_DATA3, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBOTG_DATA4__USBOTG_DATA4 IOMUX_MODE(MX31_PIN_USBOTG_DATA4, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBOTG_DATA5__USBOTG_DATA5 IOMUX_MODE(MX31_PIN_USBOTG_DATA5, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBOTG_DATA6__USBOTG_DATA6 IOMUX_MODE(MX31_PIN_USBOTG_DATA6, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBOTG_DATA7__USBOTG_DATA7 IOMUX_MODE(MX31_PIN_USBOTG_DATA7, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBOTG_CLK__USBOTG_CLK IOMUX_MODE(MX31_PIN_USBOTG_CLK, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBOTG_DIR__USBOTG_DIR IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBOTG_NXT__USBOTG_NXT IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBOTG_STP__USBOTG_STP IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSPI1_MOSI__USBH1_RXDM IOMUX_MODE(MX31_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT1) -#define MX31_PIN_CSPI1_MISO__USBH1_RXDP IOMUX_MODE(MX31_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT1) -#define MX31_PIN_CSPI1_SS0__USBH1_TXDM IOMUX_MODE(MX31_PIN_CSPI1_SS0, IOMUX_CONFIG_ALT1) -#define MX31_PIN_CSPI1_SS1__USBH1_TXDP IOMUX_MODE(MX31_PIN_CSPI1_SS1, IOMUX_CONFIG_ALT1) -#define MX31_PIN_CSPI1_SS2__USBH1_RCV IOMUX_MODE(MX31_PIN_CSPI1_SS2, IOMUX_CONFIG_ALT1) -#define MX31_PIN_CSPI1_SCLK__USBH1_OEB IOMUX_MODE(MX31_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT1) -#define MX31_PIN_CSPI1_SPI_RDY__USBH1_FS IOMUX_MODE(MX31_PIN_CSPI1_SPI_RDY, IOMUX_CONFIG_ALT1) +#define MX31_PIN_USBOTG_DATA0__USBOTG_DATA0 IOMUX_MODE(MX31_PIN_USBOTG_DATA0, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA1__USBOTG_DATA1 IOMUX_MODE(MX31_PIN_USBOTG_DATA1, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA2__USBOTG_DATA2 IOMUX_MODE(MX31_PIN_USBOTG_DATA2, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA3__USBOTG_DATA3 IOMUX_MODE(MX31_PIN_USBOTG_DATA3, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA4__USBOTG_DATA4 IOMUX_MODE(MX31_PIN_USBOTG_DATA4, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA5__USBOTG_DATA5 IOMUX_MODE(MX31_PIN_USBOTG_DATA5, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA6__USBOTG_DATA6 IOMUX_MODE(MX31_PIN_USBOTG_DATA6, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA7__USBOTG_DATA7 IOMUX_MODE(MX31_PIN_USBOTG_DATA7, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_CLK__USBOTG_CLK IOMUX_MODE(MX31_PIN_USBOTG_CLK, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DIR__USBOTG_DIR IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_NXT__USBOTG_NXT IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_STP__USBOTG_STP IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSPI1_MOSI__USBH1_RXDM IOMUX_MODE(MX31_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSPI1_MISO__USBH1_RXDP IOMUX_MODE(MX31_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSPI1_SS0__USBH1_TXDM IOMUX_MODE(MX31_PIN_CSPI1_SS0, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSPI1_SS1__USBH1_TXDP IOMUX_MODE(MX31_PIN_CSPI1_SS1, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSPI1_SS2__USBH1_RCV IOMUX_MODE(MX31_PIN_CSPI1_SS2, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSPI1_SCLK__USBH1_OEB IOMUX_MODE(MX31_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSPI1_SPI_RDY__USBH1_FS IOMUX_MODE(MX31_PIN_CSPI1_SPI_RDY, IOMUX_CONFIG_ALT1) #define MX31_PIN_SFS6__USBH1_SUSPEND IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_FUNC) #define MX31_PIN_NFRE_B__GPIO1_11 IOMUX_MODE(MX31_PIN_NFRE_B, IOMUX_CONFIG_GPIO) #define MX31_PIN_NFALE__GPIO1_12 IOMUX_MODE(MX31_PIN_NFALE, IOMUX_CONFIG_GPIO) -#define MX31_PIN_USBH2_DATA0__USBH2_DATA0 IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBH2_DATA1__USBH2_DATA1 IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBH2_DATA0__USBH2_DATA0 IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBH2_DATA1__USBH2_DATA1 IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC) #define MX31_PIN_STXD3__USBH2_DATA2 IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC) #define MX31_PIN_SRXD3__USBH2_DATA3 IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC) #define MX31_PIN_SCK3__USBH2_DATA4 IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC) #define MX31_PIN_SFS3__USBH2_DATA5 IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC) #define MX31_PIN_STXD6__USBH2_DATA6 IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC) #define MX31_PIN_SRXD6__USBH2_DATA7 IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBH2_CLK__USBH2_CLK IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBH2_DIR__USBH2_DIR IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBH2_NXT__USBH2_NXT IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBH2_STP__USBH2_STP IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBH2_CLK__USBH2_CLK IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBH2_DIR__USBH2_DIR IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBH2_NXT__USBH2_NXT IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBH2_STP__USBH2_STP IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC) #define MX31_PIN_SCK6__GPIO1_25 IOMUX_MODE(MX31_PIN_SCK6, IOMUX_CONFIG_GPIO) #define MX31_PIN_USB_OC__GPIO1_30 IOMUX_MODE(MX31_PIN_USB_OC, IOMUX_CONFIG_GPIO) #define MX31_PIN_I2C_DAT__I2C1_SDA IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC) @@ -711,8 +704,8 @@ enum iomux_pins { #define MX31_PIN_DSR_DCE1__GPIO2_9 IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_GPIO) #define MX31_PIN_RI_DCE1__GPIO2_10 IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_GPIO) #define MX31_PIN_DCD_DCE1__GPIO2_11 IOMUX_MODE(MX31_PIN_DCD_DCE1, IOMUX_CONFIG_GPIO) -#define MX31_PIN_STXD5__GPIO1_21 IOMUX_MODE(MX31_PIN_STXD5, IOMUX_CONFIG_GPIO) -#define MX31_PIN_SRXD5__GPIO1_22 IOMUX_MODE(MX31_PIN_SRXD5, IOMUX_CONFIG_GPIO) +#define MX31_PIN_STXD5__GPIO1_21 IOMUX_MODE(MX31_PIN_STXD5, IOMUX_CONFIG_GPIO) +#define MX31_PIN_SRXD5__GPIO1_22 IOMUX_MODE(MX31_PIN_SRXD5, IOMUX_CONFIG_GPIO) #define MX31_PIN_GPIO1_3__GPIO1_3 IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO) #define MX31_PIN_CSPI2_SS1__CSPI3_SS1 IOMUX_MODE(MX31_PIN_CSPI2_SS1, IOMUX_CONFIG_ALT1) #define MX31_PIN_RTS1__GPIO2_6 IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_GPIO) @@ -727,13 +720,14 @@ enum iomux_pins { #define MX31_PIN_SCK5__SCK5 IOMUX_MODE(MX31_PIN_SCK5, IOMUX_CONFIG_FUNC) #define MX31_PIN_SFS5__SFS5 IOMUX_MODE(MX31_PIN_SFS5, IOMUX_CONFIG_FUNC) -/*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0 - * cspi1_ss1*/ +/* + * XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed with cspi2_ss0, + * cspi2_ss1, cspi1_ss0 cspi1_ss1 + */ /* * This function configures the pad value for a IOMUX pin. */ void mxc_iomux_set_pad(enum iomux_pins, u32); -#endif - +#endif /* ifndef __MACH_IOMUX_MX3_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx35.h b/arch/arm/plat-mxc/include/mach/iomux-mx35.h index c88d40795f7..2a24bae1b87 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx35.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx35.h @@ -1,5 +1,5 @@ /* - * Copyright (C, NO_PAD_CTRL) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de> + * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx51.h b/arch/arm/plat-mxc/include/mach/iomux-mx51.h new file mode 100644 index 00000000000..b4f975e6a66 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/iomux-mx51.h @@ -0,0 +1,326 @@ +/* + * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#ifndef __MACH_IOMUX_MX51_H__ +#define __MACH_IOMUX_MX51_H__ + +#include <mach/iomux-v3.h> + +/* + * various IOMUX alternate output functions (1-7) + */ +typedef enum iomux_config { + IOMUX_CONFIG_ALT0, + IOMUX_CONFIG_ALT1, + IOMUX_CONFIG_ALT2, + IOMUX_CONFIG_ALT3, + IOMUX_CONFIG_ALT4, + IOMUX_CONFIG_ALT5, + IOMUX_CONFIG_ALT6, + IOMUX_CONFIG_ALT7, + IOMUX_CONFIG_GPIO, /* added to help user use GPIO mode */ + IOMUX_CONFIG_SION = 0x1 << 4, /* LOOPBACK:MUX SION bit */ +} iomux_pin_cfg_t; + +/* Pad control groupings */ +#define MX51_UART1_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_DSE_HIGH) +#define MX51_UART2_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_DSE_HIGH | \ + PAD_CTL_SRE_FAST) +#define MX51_UART3_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_DSE_HIGH | \ + PAD_CTL_SRE_FAST) + +/* + * The naming convention for the pad modes is MX51_PAD_<padname>__<padmode> + * If <padname> or <padmode> refers to a GPIO, it is named + * GPIO_<unit>_<num> see also iomux-v3.h + */ + +/* + * FIXME: This was converted using scripts from existing Freescale code to + * this form used upstream. Need to verify the name format. + */ + +/* PAD MUX ALT INPSE PATH PADCTRL */ + +#define MX51_PAD_GPIO_2_0__EIM_D16 IOMUX_PAD(0x3f0, 0x05c, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_1__EIM_D17 IOMUX_PAD(0x3f4, 0x060, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_2__EIM_D18 IOMUX_PAD(0x3f8, 0x064, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_3__EIM_D19 IOMUX_PAD(0x3fc, 0x068, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_4__EIM_D20 IOMUX_PAD(0x400, 0x06c, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_5__EIM_D21 IOMUX_PAD(0x404, 0x070, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_6__EIM_D22 IOMUX_PAD(0x408, 0x074, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_7__EIM_D23 IOMUX_PAD(0x40c, 0x078, 1, 0x0, 0, NO_PAD_CTRL) + +/* Babbage UART3 */ +#define MX51_PAD_EIM_D24__UART3_CTS IOMUX_PAD(0x410, 0x07c, IOMUX_CONFIG_ALT3, 0x0, 0, MX51_UART3_PAD_CTRL) +#define MX51_PAD_EIM_D25__UART3_RXD IOMUX_PAD(0x414, 0x080, IOMUX_CONFIG_ALT3, 0x9f4, 0, MX51_UART3_PAD_CTRL) +#define MX51_PAD_EIM_D26__UART3_TXD IOMUX_PAD(0x418, 0x084, IOMUX_CONFIG_ALT3, 0x0, 0, MX51_UART3_PAD_CTRL) +#define MX51_PAD_EIM_D27__UART3_RTS IOMUX_PAD(0x41c, 0x088, IOMUX_CONFIG_ALT3, 0x9f0, 0, MX51_UART3_PAD_CTRL) + +#define MX51_PAD_EIM_D28__EIM_D28 IOMUX_PAD(0x420, 0x08c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_D29__EIM_D29 IOMUX_PAD(0x424, 0x090, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_D30__EIM_D30 IOMUX_PAD(0x428, 0x094, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_D31__EIM_D31 IOMUX_PAD(0x42c, 0x09c, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX51_PAD_GPIO_2_10__EIM_A16 IOMUX_PAD(0x430, 0x09c, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_11__EIM_A17 IOMUX_PAD(0x434, 0x0a0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_12__EIM_A18 IOMUX_PAD(0x438, 0x0a4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_13__EIM_A19 IOMUX_PAD(0x43c, 0x0a8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_14__EIM_A20 IOMUX_PAD(0x440, 0x0ac, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_15__EIM_A21 IOMUX_PAD(0x444, 0x0b0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_16__EIM_A22 IOMUX_PAD(0x448, 0x0b4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_17__EIM_A23 IOMUX_PAD(0x44c, 0x0b8, 1, 0x0, 0, NO_PAD_CTRL) + +#define MX51_PAD_GPIO_2_18__EIM_A24 IOMUX_PAD(0x450, 0x0bc, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_19__EIM_A25 IOMUX_PAD(0x454, 0x0c0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_20__EIM_A26 IOMUX_PAD(0x458, 0x0c4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_21__EIM_A27 IOMUX_PAD(0x45c, 0x0c8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_EB0__EIM_EB0 IOMUX_PAD(0x460, 0x0cc, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_EB1__EIM_EB1 IOMUX_PAD(0x464, 0x0d0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_22__EIM_EB2 IOMUX_PAD(0x468, 0x0d4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_23__EIM_EB3 IOMUX_PAD(0x46c, 0x0d8, 1, 0x0, 0, NO_PAD_CTRL) + +#define MX51_PAD_GPIO_2_24__EIM_OE IOMUX_PAD(0x470, 0x0dc, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_25__EIM_CS0 IOMUX_PAD(0x474, 0x0e0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_26__EIM_CS1 IOMUX_PAD(0x478, 0x0e4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_27__EIM_CS2 IOMUX_PAD(0x47c, 0x0e8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_28__EIM_CS3 IOMUX_PAD(0x480, 0x0ec, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_29__EIM_CS4 IOMUX_PAD(0x484, 0x0f0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_30__EIM_CS5 IOMUX_PAD(0x488, 0x0f4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_2_31__EIM_DTACK IOMUX_PAD(0x48c, 0x0f8, 1, 0x0, 0, NO_PAD_CTRL) + +#define MX51_PAD_GPIO_3_1__EIM_LBA IOMUX_PAD(0x494, 0xFC, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_2__EIM_CRE IOMUX_PAD(0x4A0, 0x100, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DRAM_CS1__DRAM_CS1 IOMUX_PAD(0x4D0, 0x104, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_3__NANDF_WE_B IOMUX_PAD(0x4E4, 0x108, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_4__NANDF_RE_B IOMUX_PAD(0x4E8, 0x10C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_5__NANDF_ALE IOMUX_PAD(0x4EC, 0x110, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_6__NANDF_CLE IOMUX_PAD(0x4F0, 0x114, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_7__NANDF_WP_B IOMUX_PAD(0x4F4, 0x118, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_8__NANDF_RB0 IOMUX_PAD(0x4F8, 0x11C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_9__NANDF_RB1 IOMUX_PAD(0x4FC, 0x120, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_10__NANDF_RB2 IOMUX_PAD(0x500, 0x124, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_11__NANDF_RB3 IOMUX_PAD(0x504, 0x128, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_12__GPIO_NAND IOMUX_PAD(0x514, 0x12C, 3, 0x0, 0, NO_PAD_CTRL) +/* REVISIT: Not sure of these values + + #define MX51_PAD_GPIO_1___NANDF_RB4 IOMUX_PAD(, , , 0x0, 0, NO_PAD_CTRL) + #define MX51_PAD_GPIO_3_13__NANDF_RB5 IOMUX_PAD(0x5D8, 0x130, 3, 0x0, 0, NO_PAD_CTRL) + #define MX51_PAD_GPIO_3_15__NANDF_RB7 IOMUX_PAD(0x5E0, 0x138, 3, 0x0, 0, NO_PAD_CTRL) +*/ +#define MX51_PAD_GPIO_3_14__NANDF_RB6 IOMUX_PAD(0x5DC, 0x134, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_16__NANDF_CS0 IOMUX_PAD(0x518, 0x130, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_17__NANDF_CS1 IOMUX_PAD(0x51C, 0x134, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_18__NANDF_CS2 IOMUX_PAD(0x520, 0x138, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_19__NANDF_CS3 IOMUX_PAD(0x524, 0x13C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_20__NANDF_CS4 IOMUX_PAD(0x528, 0x140, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_21__NANDF_CS5 IOMUX_PAD(0x52C, 0x144, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_22__NANDF_CS6 IOMUX_PAD(0x530, 0x148, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_23__NANDF_CS7 IOMUX_PAD(0x534, 0x14C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_24__NANDF_RDY_INT IOMUX_PAD(0x538, 0x150, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_25__NANDF_D15 IOMUX_PAD(0x53C, 0x154, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_26__NANDF_D14 IOMUX_PAD(0x540, 0x158, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_27__NANDF_D13 IOMUX_PAD(0x544, 0x15C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_28__NANDF_D12 IOMUX_PAD(0x548, 0x160, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_29__NANDF_D11 IOMUX_PAD(0x54C, 0x164, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_30__NANDF_D10 IOMUX_PAD(0x550, 0x168, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_31__NANDF_D9 IOMUX_PAD(0x554, 0x16C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_0__NANDF_D8 IOMUX_PAD(0x558, 0x170, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_1__NANDF_D7 IOMUX_PAD(0x55C, 0x174, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_2__NANDF_D6 IOMUX_PAD(0x560, 0x178, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_3__NANDF_D5 IOMUX_PAD(0x564, 0x17C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_4__NANDF_D4 IOMUX_PAD(0x568, 0x180, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_5__NANDF_D3 IOMUX_PAD(0x56C, 0x184, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_6__NANDF_D2 IOMUX_PAD(0x570, 0x188, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_7__NANDF_D1 IOMUX_PAD(0x574, 0x18C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_8__NANDF_D0 IOMUX_PAD(0x578, 0x190, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_12__CSI1_D8 IOMUX_PAD(0x57C, 0x194, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_13__CSI1_D9 IOMUX_PAD(0x580, 0x198, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D10__CSI1_D10 IOMUX_PAD(0x584, 0x19C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D11__CSI1_D11 IOMUX_PAD(0x588, 0x1A0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D12__CSI1_D12 IOMUX_PAD(0x58C, 0x1A4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D13__CSI1_D13 IOMUX_PAD(0x590, 0x1A8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D14__CSI1_D14 IOMUX_PAD(0x594, 0x1AC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D15__CSI1_D15 IOMUX_PAD(0x598, 0x1B0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D16__CSI1_D16 IOMUX_PAD(0x59C, 0x1B4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D17__CSI1_D17 IOMUX_PAD(0x5A0, 0x1B8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D18__CSI1_D18 IOMUX_PAD(0x5A4, 0x1BC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D19__CSI1_D19 IOMUX_PAD(0x5A8, 0x1C0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_VSYNC__CSI1_VSYNC IOMUX_PAD(0x5AC, 0x1C4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_HSYNC__CSI1_HSYNC IOMUX_PAD(0x5B0, 0x1C8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK IOMUX_PAD(0x5B4, 0x0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_MCLK__CSI1_MCLK IOMUX_PAD(0x5B8, 0x0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_PKE0__CSI1_PKE0 IOMUX_PAD(0x860, 0x0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_9__CSI2_D12 IOMUX_PAD(0x5BC, 0x1CC, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_10__CSI2_D13 IOMUX_PAD(0x5C0, 0x1D0, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_11__CSI2_D14 IOMUX_PAD(0x5C4, 0x1D4, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_12__CSI2_D15 IOMUX_PAD(0x5C8, 0x1D8, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_11__CSI2_D16 IOMUX_PAD(0x5CC, 0x1DC, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_12__CSI2_D17 IOMUX_PAD(0x5D0, 0x1E0, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_11__CSI2_D18 IOMUX_PAD(0x5D4, 0x1E4, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_12__CSI2_D19 IOMUX_PAD(0x5D8, 0x1E8, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_13__CSI2_VSYNC IOMUX_PAD(0x5DC, 0x1EC, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_14__CSI2_HSYNC IOMUX_PAD(0x5E0, 0x1F0, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_15__CSI2_PIXCLK IOMUX_PAD(0x5E4, 0x1F4, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI2_PKE0__CSI2_PKE0 IOMUX_PAD(0x81C, 0x0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_16__I2C1_CLK IOMUX_PAD(0x5E8, 0x1F8, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_17__I2C1_DAT IOMUX_PAD(0x5EC, 0x1FC, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_18__AUD3_BB_TXD IOMUX_PAD(0x5F0, 0x200, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_19__AUD3_BB_RXD IOMUX_PAD(0x5F4, 0x204, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_20__AUD3_BB_CK IOMUX_PAD(0x5F8, 0x208, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_21__AUD3_BB_FS IOMUX_PAD(0x5FC, 0x20C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_22__CSPI1_MOSI IOMUX_PAD(0x600, 0x210, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_23__CSPI1_MISO IOMUX_PAD(0x604, 0x214, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_24__CSPI1_SS0 IOMUX_PAD(0x608, 0x218, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_25__CSPI1_SS1 IOMUX_PAD(0x60C, 0x21C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_26__CSPI1_RDY IOMUX_PAD(0x610, 0x220, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_4_27__CSPI1_SCLK IOMUX_PAD(0x614, 0x224, 3, 0x0, 0, NO_PAD_CTRL) + +/* Babbage UART1 */ +#define MX51_PAD_UART1_RXD__UART1_RXD IOMUX_PAD(0x618, 0x228, IOMUX_CONFIG_ALT0, 0x9e4, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST) +#define MX51_PAD_UART1_TXD__UART1_TXD IOMUX_PAD(0x61C, 0x22C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST) +#define MX51_PAD_UART1_RTS__UART1_RTS IOMUX_PAD(0x620, 0x230, IOMUX_CONFIG_ALT0, 0x9e0, 0, MX51_UART1_PAD_CTRL) +#define MX51_PAD_UART1_CTS__UART1_CTS IOMUX_PAD(0x624, 0x234, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_UART1_PAD_CTRL) + +/* Babbage UART2 */ +#define MX51_PAD_UART2_RXD__UART2_RXD IOMUX_PAD(0x628, 0x238, IOMUX_CONFIG_ALT0, 0x9ec, 2, MX51_UART2_PAD_CTRL) +#define MX51_PAD_UART2_TXD__UART2_TXD IOMUX_PAD(0x62C, 0x23C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_UART2_PAD_CTRL) + +#define MX51_PAD_GPIO_1_22__UART3_RXD IOMUX_PAD(0x630, 0x240, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_23__UART3_TXD IOMUX_PAD(0x634, 0x244, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_24__OWIRE_LINE IOMUX_PAD(0x638, 0x248, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_ROW0__KEY_ROW0 IOMUX_PAD(0x63C, 0x24C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_ROW1__KEY_ROW1 IOMUX_PAD(0x640, 0x250, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_ROW2__KEY_ROW2 IOMUX_PAD(0x644, 0x254, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_ROW3__KEY_ROW3 IOMUX_PAD(0x648, 0x258, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_COL0__KEY_COL0 IOMUX_PAD(0x64C, 0x25C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_COL1__KEY_COL1 IOMUX_PAD(0x650, 0x260, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_COL2__KEY_COL2 IOMUX_PAD(0x654, 0x264, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_COL3__KEY_COL3 IOMUX_PAD(0x658, 0x268, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_COL4__KEY_COL4 IOMUX_PAD(0x65C, 0x26C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_COL5__KEY_COL5 IOMUX_PAD(0x660, 0x270, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_25__USBH1_CLK IOMUX_PAD(0x678, 0x278, 2, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_26__USBH1_DIR IOMUX_PAD(0x67C, 0x27C, 2, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_27__USBH1_STP IOMUX_PAD(0x680, 0x280, 2, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_28__USBH1_NXT IOMUX_PAD(0x684, 0x284, 2, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_11__USBH1_DATA0 IOMUX_PAD(0x688, 0x288, 2, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_12__USBH1_DATA1 IOMUX_PAD(0x68C, 0x28C, 2, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_13__USBH1_DATA2 IOMUX_PAD(0x690, 0x290, 2, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_14__USBH1_DATA3 IOMUX_PAD(0x694, 0x294, 2, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_15__USBH1_DATA4 IOMUX_PAD(0x698, 0x298, 2, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_16__USBH1_DATA5 IOMUX_PAD(0x69C, 0x29C, 2, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_17__USBH1_DATA6 IOMUX_PAD(0x6A0, 0x2A0, 2, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_18__USBH1_DATA7 IOMUX_PAD(0x6A4, 0x2A4, 2, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_0__DI1_PIN11 IOMUX_PAD(0x6A8, 0x2A8, 4, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_1__DI1_PIN12 IOMUX_PAD(0x6AC, 0x2AC, 4, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_2__DI1_PIN13 IOMUX_PAD(0x6B0, 0x2B0, 4, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_3__DI1_D0_CS IOMUX_PAD(0x6B4, 0x2B4, 4, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_4__DI1_D1_CS IOMUX_PAD(0x6B8, 0x2B8, 4, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_5__DISPB2_SER_DIN IOMUX_PAD(0x6BC, 0x2BC, 4, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_6__DISPB2_SER_DIO IOMUX_PAD(0x6C0, 0x2C0, 4, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_7__DISPB2_SER_CLK IOMUX_PAD(0x6C4, 0x2C4, 4, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_3_8__DISPB2_SER_RS IOMUX_PAD(0x6C8, 0x2C8, 4, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT0__DISP1_DAT0 IOMUX_PAD(0x6CC, 0x2CC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT1__DISP1_DAT1 IOMUX_PAD(0x6D0, 0x2D0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT2__DISP1_DAT2 IOMUX_PAD(0x6D4, 0x2D4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT3__DISP1_DAT3 IOMUX_PAD(0x6D8, 0x2D8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT4__DISP1_DAT4 IOMUX_PAD(0x6DC, 0x2DC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT5__DISP1_DAT5 IOMUX_PAD(0x6E0, 0x2E0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT6__DISP1_DAT6 IOMUX_PAD(0x6E4, 0x2E4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT7__DISP1_DAT7 IOMUX_PAD(0x6E8, 0x2E8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT8__DISP1_DAT8 IOMUX_PAD(0x6EC, 0x2EC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT9__DISP1_DAT9 IOMUX_PAD(0x6F0, 0x2F0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT10__DISP1_DAT10 IOMUX_PAD(0x6F4, 0x2F4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT11__DISP1_DAT11 IOMUX_PAD(0x6F8, 0x2F8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT12__DISP1_DAT12 IOMUX_PAD(0x6FC, 0x2FC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT13__DISP1_DAT13 IOMUX_PAD(0x700, 0x300, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT14__DISP1_DAT14 IOMUX_PAD(0x704, 0x304, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT15__DISP1_DAT15 IOMUX_PAD(0x708, 0x308, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT16__DISP1_DAT16 IOMUX_PAD(0x70C, 0x30C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT17__DISP1_DAT17 IOMUX_PAD(0x710, 0x310, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT18__DISP1_DAT18 IOMUX_PAD(0x714, 0x314, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT19__DISP1_DAT19 IOMUX_PAD(0x718, 0x318, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT20__DISP1_DAT20 IOMUX_PAD(0x71C, 0x31C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT21__DISP1_DAT21 IOMUX_PAD(0x720, 0x320, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT22__DISP1_DAT22 IOMUX_PAD(0x724, 0x324, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT23__DISP1_DAT23 IOMUX_PAD(0x728, 0x328, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI1_PIN3__DI1_PIN3 IOMUX_PAD(0x72C, 0x32C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI1_PIN2__DI1_PIN2 IOMUX_PAD(0x734, 0x330, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI_GP1__DI_GP1 IOMUX_PAD(0x73C, 0x334, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI_GP2__DI_GP2 IOMUX_PAD(0x740, 0x338, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI_GP3__DI_GP3 IOMUX_PAD(0x744, 0x33C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI2_PIN4__DI2_PIN4 IOMUX_PAD(0x748, 0x340, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI2_PIN2__DI2_PIN2 IOMUX_PAD(0x74C, 0x344, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI2_PIN3__DI2_PIN3 IOMUX_PAD(0x750, 0x348, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK IOMUX_PAD(0x754, 0x34C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI_GP4__DI_GP4 IOMUX_PAD(0x758, 0x350, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT0__DISP2_DAT0 IOMUX_PAD(0x75C, 0x354, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT1__DISP2_DAT1 IOMUX_PAD(0x760, 0x358, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT2__DISP2_DAT2 IOMUX_PAD(0x764, 0x35C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT3__DISP2_DAT3 IOMUX_PAD(0x768, 0x360, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT4__DISP2_DAT4 IOMUX_PAD(0x76C, 0x364, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT5__DISP2_DAT5 IOMUX_PAD(0x770, 0x368, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_19__DISP2_DAT6 IOMUX_PAD(0x774, 0x36C, 5, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_29__DISP2_DAT7 IOMUX_PAD(0x778, 0x370, 5, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_30__DISP2_DAT8 IOMUX_PAD(0x77C, 0x374, 5, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_31__DISP2_DAT9 IOMUX_PAD(0x780, 0x378, 5, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT10__DISP2_DAT10 IOMUX_PAD(0x784, 0x37C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT11__DISP2_DAT11 IOMUX_PAD(0x788, 0x380, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT12__DISP2_DAT12 IOMUX_PAD(0x78C, 0x384, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT13__DISP2_DAT13 IOMUX_PAD(0x790, 0x388, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT14__DISP2_DAT14 IOMUX_PAD(0x794, 0x38C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT15__DISP2_DAT15 IOMUX_PAD(0x798, 0x390, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD1_CMD__SD1_CMD IOMUX_PAD(0x79C, 0x394, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD1_CLK__SD1_CLK IOMUX_PAD(0x7A0, 0x398, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD1_DATA0__SD1_DATA0 IOMUX_PAD(0x7A4, 0x39C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD1_DATA1__SD1_DATA1 IOMUX_PAD(0x7A8, 0x3A0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD1_DATA2__SD1_DATA2 IOMUX_PAD(0x7AC, 0x3A4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD1_DATA3__SD1_DATA3 IOMUX_PAD(0x7B0, 0x3A8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_0__GPIO1_0 IOMUX_PAD(0x7B4, 0x3AC, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_1__GPIO1_1 IOMUX_PAD(0x7B8, 0x3B0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD2_CMD__SD2_CMD IOMUX_PAD(0x7BC, 0x3B4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD2_CLK__SD2_CLK IOMUX_PAD(0x7C0, 0x3B8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD2_DATA0__SD2_DATA0 IOMUX_PAD(0x7C4, 0x3BC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD2_DATA1__SD2_DATA1 IOMUX_PAD(0x7C8, 0x3C0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD2_DATA2__SD2_DATA2 IOMUX_PAD(0x7CC, 0x3C4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD2_DATA3__SD2_DATA3 IOMUX_PAD(0x7D0, 0x3C8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_2__GPIO1_2 IOMUX_PAD(0x7D4, 0x3CC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_3__GPIO1_3 IOMUX_PAD(0x7D8, 0x3D0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ IOMUX_PAD(0x7FC, 0x3D4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_4__GPIO1_4 IOMUX_PAD(0x804, 0x3D8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_5__GPIO1_5 IOMUX_PAD(0x808, 0x3DC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_6__GPIO1_6 IOMUX_PAD(0x80C, 0x3E0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_7__GPIO1_7 IOMUX_PAD(0x810, 0x3E4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_8__GPIO1_8 IOMUX_PAD(0x814, 0x3E8, 0, 0x0, 1, \ + (PAD_CTL_SRE_SLOW | PAD_CTL_DSE_MED | PAD_CTL_PUS_100K_UP | PAD_CTL_HYS)) +#define MX51_PAD_GPIO_1_9__GPIO1_9 IOMUX_PAD(0x818, 0x3EC, 0, 0x0, 0, NO_PAD_CTRL) + +/* EIM */ +#define MX51_PAD_EIM_DA0__EIM_DA0 IOMUX_PAD(0x7a8, 0x01c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA1__EIM_DA1 IOMUX_PAD(0x7a8, 0x020, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA2__EIM_DA2 IOMUX_PAD(0x7a8, 0x024, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA3__EIM_DA3 IOMUX_PAD(0x7a8, 0x028, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA4__EIM_DA4 IOMUX_PAD(0x7ac, 0x02c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA5__EIM_DA5 IOMUX_PAD(0x7ac, 0x030, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA6__EIM_DA6 IOMUX_PAD(0x7ac, 0x034, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA7__EIM_DA7 IOMUX_PAD(0x7ac, 0x038, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX51_PAD_EIM_DA8__EIM_DA8 IOMUX_PAD(0x7b0, 0x03c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA9__EIM_DA9 IOMUX_PAD(0x7b0, 0x040, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA10__EIM_DA10 IOMUX_PAD(0x7b0, 0x044, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA11__EIM_DA11 IOMUX_PAD(0x7b0, 0x048, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA12__EIM_DA12 IOMUX_PAD(0x7bc, 0x04c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA13__EIM_DA13 IOMUX_PAD(0x7bc, 0x050, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA14__EIM_DA14 IOMUX_PAD(0x7bc, 0x054, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA15__EIM_DA15 IOMUX_PAD(0x7bc, 0x058, 0, 0x0, 0, NO_PAD_CTRL) + +#endif /* __MACH_IOMUX_MX51_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/iomux-v1.h b/arch/arm/plat-mxc/include/mach/iomux-v1.h new file mode 100644 index 00000000000..884f5753f27 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/iomux-v1.h @@ -0,0 +1,103 @@ +/* + * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> + * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ +#ifndef __MACH_IOMUX_V1_H__ +#define __MACH_IOMUX_V1_H__ + +/* +* GPIO Module and I/O Multiplexer +* x = 0..3 for reg_A, reg_B, reg_C, reg_D +*/ +#define MXC_DDIR(x) (0x00 + ((x) << 8)) +#define MXC_OCR1(x) (0x04 + ((x) << 8)) +#define MXC_OCR2(x) (0x08 + ((x) << 8)) +#define MXC_ICONFA1(x) (0x0c + ((x) << 8)) +#define MXC_ICONFA2(x) (0x10 + ((x) << 8)) +#define MXC_ICONFB1(x) (0x14 + ((x) << 8)) +#define MXC_ICONFB2(x) (0x18 + ((x) << 8)) +#define MXC_DR(x) (0x1c + ((x) << 8)) +#define MXC_GIUS(x) (0x20 + ((x) << 8)) +#define MXC_SSR(x) (0x24 + ((x) << 8)) +#define MXC_ICR1(x) (0x28 + ((x) << 8)) +#define MXC_ICR2(x) (0x2c + ((x) << 8)) +#define MXC_IMR(x) (0x30 + ((x) << 8)) +#define MXC_ISR(x) (0x34 + ((x) << 8)) +#define MXC_GPR(x) (0x38 + ((x) << 8)) +#define MXC_SWR(x) (0x3c + ((x) << 8)) +#define MXC_PUEN(x) (0x40 + ((x) << 8)) + +#define MX1_NUM_GPIO_PORT 4 +#define MX21_NUM_GPIO_PORT 6 +#define MX27_NUM_GPIO_PORT 6 + +#define GPIO_PIN_MASK 0x1f + +#define GPIO_PORT_SHIFT 5 +#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT) + +#define GPIO_PORTA (0 << GPIO_PORT_SHIFT) +#define GPIO_PORTB (1 << GPIO_PORT_SHIFT) +#define GPIO_PORTC (2 << GPIO_PORT_SHIFT) +#define GPIO_PORTD (3 << GPIO_PORT_SHIFT) +#define GPIO_PORTE (4 << GPIO_PORT_SHIFT) +#define GPIO_PORTF (5 << GPIO_PORT_SHIFT) + +#define GPIO_OUT (1 << 8) +#define GPIO_IN (0 << 8) +#define GPIO_PUEN (1 << 9) + +#define GPIO_PF (1 << 10) +#define GPIO_AF (1 << 11) + +#define GPIO_OCR_SHIFT 12 +#define GPIO_OCR_MASK (3 << GPIO_OCR_SHIFT) +#define GPIO_AIN (0 << GPIO_OCR_SHIFT) +#define GPIO_BIN (1 << GPIO_OCR_SHIFT) +#define GPIO_CIN (2 << GPIO_OCR_SHIFT) +#define GPIO_GPIO (3 << GPIO_OCR_SHIFT) + +#define GPIO_AOUT_SHIFT 14 +#define GPIO_AOUT_MASK (3 << GPIO_AOUT_SHIFT) +#define GPIO_AOUT (0 << GPIO_AOUT_SHIFT) +#define GPIO_AOUT_ISR (1 << GPIO_AOUT_SHIFT) +#define GPIO_AOUT_0 (2 << GPIO_AOUT_SHIFT) +#define GPIO_AOUT_1 (3 << GPIO_AOUT_SHIFT) + +#define GPIO_BOUT_SHIFT 16 +#define GPIO_BOUT_MASK (3 << GPIO_BOUT_SHIFT) +#define GPIO_BOUT (0 << GPIO_BOUT_SHIFT) +#define GPIO_BOUT_ISR (1 << GPIO_BOUT_SHIFT) +#define GPIO_BOUT_0 (2 << GPIO_BOUT_SHIFT) +#define GPIO_BOUT_1 (3 << GPIO_BOUT_SHIFT) + +/* decode irq number to use with IMR(x), ISR(x) and friends */ +#define IRQ_TO_REG(irq) ((irq - MXC_INTERNAL_IRQS) >> 5) + +#define IRQ_GPIOA(x) (MXC_GPIO_IRQ_START + x) +#define IRQ_GPIOB(x) (IRQ_GPIOA(32) + x) +#define IRQ_GPIOC(x) (IRQ_GPIOB(32) + x) +#define IRQ_GPIOD(x) (IRQ_GPIOC(32) + x) +#define IRQ_GPIOE(x) (IRQ_GPIOD(32) + x) +#define IRQ_GPIOF(x) (IRQ_GPIOE(32) + x) + +extern int mxc_gpio_mode(int gpio_mode); +extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count, + const char *label); +extern void mxc_gpio_release_multiple_pins(const int *pin_list, int count); + +#endif /* __MACH_IOMUX_V1_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h index 1deda018489..f2f73d31d5b 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-v3.h +++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h @@ -81,11 +81,13 @@ struct pad_desc { #define PAD_CTL_ODE (1 << 3) -#define PAD_CTL_DSE_STANDARD (0 << 1) -#define PAD_CTL_DSE_HIGH (1 << 1) -#define PAD_CTL_DSE_MAX (2 << 1) +#define PAD_CTL_DSE_LOW (0 << 1) +#define PAD_CTL_DSE_MED (1 << 1) +#define PAD_CTL_DSE_HIGH (2 << 1) +#define PAD_CTL_DSE_MAX (3 << 1) #define PAD_CTL_SRE_FAST (1 << 0) +#define PAD_CTL_SRE_SLOW (0 << 0) /* * setups a single pad in the iomuxer diff --git a/arch/arm/plat-mxc/include/mach/iomux.h b/arch/arm/plat-mxc/include/mach/iomux.h index 011cfcd8b82..3d226d7e7be 100644 --- a/arch/arm/plat-mxc/include/mach/iomux.h +++ b/arch/arm/plat-mxc/include/mach/iomux.h @@ -1,102 +1,14 @@ /* -* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> -* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de> -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License -* as published by the Free Software Foundation; either version 2 -* of the License, or (at your option) any later version. -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program; if not, write to the Free Software -* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, -* MA 02110-1301, USA. -*/ - -#ifndef _MXC_IOMUX_H -#define _MXC_IOMUX_H - -/* -* GPIO Module and I/O Multiplexer -* x = 0..3 for reg_A, reg_B, reg_C, reg_D -*/ -#define VA_GPIO_BASE IO_ADDRESS(GPIO_BASE_ADDR) -#define MXC_DDIR(x) (0x00 + ((x) << 8)) -#define MXC_OCR1(x) (0x04 + ((x) << 8)) -#define MXC_OCR2(x) (0x08 + ((x) << 8)) -#define MXC_ICONFA1(x) (0x0c + ((x) << 8)) -#define MXC_ICONFA2(x) (0x10 + ((x) << 8)) -#define MXC_ICONFB1(x) (0x14 + ((x) << 8)) -#define MXC_ICONFB2(x) (0x18 + ((x) << 8)) -#define MXC_DR(x) (0x1c + ((x) << 8)) -#define MXC_GIUS(x) (0x20 + ((x) << 8)) -#define MXC_SSR(x) (0x24 + ((x) << 8)) -#define MXC_ICR1(x) (0x28 + ((x) << 8)) -#define MXC_ICR2(x) (0x2c + ((x) << 8)) -#define MXC_IMR(x) (0x30 + ((x) << 8)) -#define MXC_ISR(x) (0x34 + ((x) << 8)) -#define MXC_GPR(x) (0x38 + ((x) << 8)) -#define MXC_SWR(x) (0x3c + ((x) << 8)) -#define MXC_PUEN(x) (0x40 + ((x) << 8)) - -#ifdef CONFIG_ARCH_MX1 -# define GPIO_PORT_MAX 3 -#endif -#ifdef CONFIG_ARCH_MX2 -# define GPIO_PORT_MAX 5 -#endif -#ifdef CONFIG_ARCH_MX25 -# define GPIO_PORT_MAX 3 -#endif - -#ifndef GPIO_PORT_MAX -# error "GPIO config port count unknown!" -#endif - -#define GPIO_PIN_MASK 0x1f - -#define GPIO_PORT_SHIFT 5 -#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT) - -#define GPIO_PORTA (0 << GPIO_PORT_SHIFT) -#define GPIO_PORTB (1 << GPIO_PORT_SHIFT) -#define GPIO_PORTC (2 << GPIO_PORT_SHIFT) -#define GPIO_PORTD (3 << GPIO_PORT_SHIFT) -#define GPIO_PORTE (4 << GPIO_PORT_SHIFT) -#define GPIO_PORTF (5 << GPIO_PORT_SHIFT) - -#define GPIO_OUT (1 << 8) -#define GPIO_IN (0 << 8) -#define GPIO_PUEN (1 << 9) - -#define GPIO_PF (1 << 10) -#define GPIO_AF (1 << 11) - -#define GPIO_OCR_SHIFT 12 -#define GPIO_OCR_MASK (3 << GPIO_OCR_SHIFT) -#define GPIO_AIN (0 << GPIO_OCR_SHIFT) -#define GPIO_BIN (1 << GPIO_OCR_SHIFT) -#define GPIO_CIN (2 << GPIO_OCR_SHIFT) -#define GPIO_GPIO (3 << GPIO_OCR_SHIFT) - -#define GPIO_AOUT_SHIFT 14 -#define GPIO_AOUT_MASK (3 << GPIO_AOUT_SHIFT) -#define GPIO_AOUT (0 << GPIO_AOUT_SHIFT) -#define GPIO_AOUT_ISR (1 << GPIO_AOUT_SHIFT) -#define GPIO_AOUT_0 (2 << GPIO_AOUT_SHIFT) -#define GPIO_AOUT_1 (3 << GPIO_AOUT_SHIFT) - -#define GPIO_BOUT_SHIFT 16 -#define GPIO_BOUT_MASK (3 << GPIO_BOUT_SHIFT) -#define GPIO_BOUT (0 << GPIO_BOUT_SHIFT) -#define GPIO_BOUT_ISR (1 << GPIO_BOUT_SHIFT) -#define GPIO_BOUT_0 (2 << GPIO_BOUT_SHIFT) -#define GPIO_BOUT_1 (3 << GPIO_BOUT_SHIFT) + * Copyright (C) 2010 Uwe Kleine-Koenig, Pengutronix + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#ifndef __MACH_IOMUX_H__ +#define __MACH_IOMUX_H__ +/* This file will go away, please include mach/iomux-mx... directly */ #ifdef CONFIG_ARCH_MX1 #include <mach/iomux-mx1.h> @@ -110,25 +22,5 @@ #include <mach/iomux-mx27.h> #endif #endif -#ifdef CONFIG_ARCH_MX25 -#include <mach/iomux-mx25.h> -#endif - -/* decode irq number to use with IMR(x), ISR(x) and friends */ -#define IRQ_TO_REG(irq) ((irq - MXC_INTERNAL_IRQS) >> 5) - -#define IRQ_GPIOA(x) (MXC_GPIO_IRQ_START + x) -#define IRQ_GPIOB(x) (IRQ_GPIOA(32) + x) -#define IRQ_GPIOC(x) (IRQ_GPIOB(32) + x) -#define IRQ_GPIOD(x) (IRQ_GPIOC(32) + x) -#define IRQ_GPIOE(x) (IRQ_GPIOD(32) + x) -#define IRQ_GPIOF(x) (IRQ_GPIOE(32) + x) - - -extern void mxc_gpio_mode(int gpio_mode); -extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count, - const char *label); -extern void mxc_gpio_release_multiple_pins(const int *pin_list, int count); - -#endif +#endif /* __MACH_IOMUX_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h index 0cb347645db..86781f7b0c0 100644 --- a/arch/arm/plat-mxc/include/mach/irqs.h +++ b/arch/arm/plat-mxc/include/mach/irqs.h @@ -12,22 +12,29 @@ #define __ASM_ARCH_MXC_IRQS_H__ /* - * So far all i.MX SoCs have 64 internal interrupts + * SoCs with TZIC interrupt controller have 128 IRQs, those with AVIC have 64 */ +#ifdef CONFIG_MXC_TZIC +#define MXC_INTERNAL_IRQS 128 +#else #define MXC_INTERNAL_IRQS 64 +#endif #define MXC_GPIO_IRQ_START MXC_INTERNAL_IRQS -#if defined CONFIG_ARCH_MX1 -#define MXC_GPIO_IRQS (32 * 4) -#elif defined CONFIG_ARCH_MX2 +/* these are ordered by size to support multi-SoC kernels */ +#if defined CONFIG_ARCH_MX2 #define MXC_GPIO_IRQS (32 * 6) -#elif defined CONFIG_ARCH_MX3 -#define MXC_GPIO_IRQS (32 * 3) +#elif defined CONFIG_ARCH_MX1 +#define MXC_GPIO_IRQS (32 * 4) #elif defined CONFIG_ARCH_MX25 #define MXC_GPIO_IRQS (32 * 4) +#elif defined CONFIG_ARCH_MX5 +#define MXC_GPIO_IRQS (32 * 4) #elif defined CONFIG_ARCH_MXC91231 #define MXC_GPIO_IRQS (32 * 4) +#elif defined CONFIG_ARCH_MX3 +#define MXC_GPIO_IRQS (32 * 3) #endif /* @@ -51,6 +58,7 @@ #else #define MX3_IPU_IRQS 0 #endif +/* REVISIT: Add IPU irqs on IMX51 */ #define NR_IRQS (MXC_IPU_IRQ_START + MX3_IPU_IRQS) diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h index d3afafdcc0e..c4b40c35a6a 100644 --- a/arch/arm/plat-mxc/include/mach/memory.h +++ b/arch/arm/plat-mxc/include/mach/memory.h @@ -11,37 +11,45 @@ #ifndef __ASM_ARCH_MXC_MEMORY_H__ #define __ASM_ARCH_MXC_MEMORY_H__ -#if defined CONFIG_ARCH_MX1 -#define PHYS_OFFSET UL(0x08000000) -#elif defined CONFIG_ARCH_MX2 -#ifdef CONFIG_MACH_MX21 -#define PHYS_OFFSET UL(0xC0000000) -#endif -#ifdef CONFIG_MACH_MX27 -#define PHYS_OFFSET UL(0xA0000000) -#endif -#elif defined CONFIG_ARCH_MX3 -#define PHYS_OFFSET UL(0x80000000) -#elif defined CONFIG_ARCH_MX25 -#define PHYS_OFFSET UL(0x80000000) -#elif defined CONFIG_ARCH_MXC91231 -#define PHYS_OFFSET UL(0x90000000) +#define MX1_PHYS_OFFSET UL(0x08000000) +#define MX21_PHYS_OFFSET UL(0xc0000000) +#define MX25_PHYS_OFFSET UL(0x80000000) +#define MX27_PHYS_OFFSET UL(0xa0000000) +#define MX3x_PHYS_OFFSET UL(0x80000000) +#define MX51_PHYS_OFFSET UL(0x90000000) +#define MXC91231_PHYS_OFFSET UL(0x90000000) + +#if !defined(CONFIG_RUNTIME_PHYS_OFFSET) +# if defined CONFIG_ARCH_MX1 +# define PHYS_OFFSET MX1_PHYS_OFFSET +# elif defined CONFIG_MACH_MX21 +# define PHYS_OFFSET MX21_PHYS_OFFSET +# elif defined CONFIG_ARCH_MX25 +# define PHYS_OFFSET MX25_PHYS_OFFSET +# elif defined CONFIG_MACH_MX27 +# define PHYS_OFFSET MX27_PHYS_OFFSET +# elif defined CONFIG_ARCH_MX3 +# define PHYS_OFFSET MX3x_PHYS_OFFSET +# elif defined CONFIG_ARCH_MXC91231 +# define PHYS_OFFSET MXC91231_PHYS_OFFSET +# elif defined CONFIG_ARCH_MX5 +# define PHYS_OFFSET MX51_PHYS_OFFSET +# endif #endif -#if defined(CONFIG_MX1_VIDEO) +#if defined(CONFIG_MX3_VIDEO) /* * Increase size of DMA-consistent memory region. - * This is required for i.MX camera driver to capture at least four VGA frames. + * This is required for mx3 camera driver to capture at least two QXGA frames. */ -#define CONSISTENT_DMA_SIZE SZ_4M -#endif /* CONFIG_MX1_VIDEO */ +#define CONSISTENT_DMA_SIZE SZ_8M -#if defined(CONFIG_MX3_VIDEO) +#elif defined(CONFIG_MX1_VIDEO) /* * Increase size of DMA-consistent memory region. - * This is required for mx3 camera driver to capture at least two QXGA frames. + * This is required for i.MX camera driver to capture at least four VGA frames. */ -#define CONSISTENT_DMA_SIZE SZ_8M -#endif /* CONFIG_MX3_VIDEO */ +#define CONSISTENT_DMA_SIZE SZ_4M +#endif /* CONFIG_MX1_VIDEO */ #endif /* __ASM_ARCH_MXC_MEMORY_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mtd-xip.h b/arch/arm/plat-mxc/include/mach/mtd-xip.h deleted file mode 100644 index 1ab1bba5688..00000000000 --- a/arch/arm/plat-mxc/include/mach/mtd-xip.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * MTD primitives for XIP support. Architecture specific functions - * - * Do not include this file directly. It's included from linux/mtd/xip.h - * - * Copyright (C) 2008 Darius Augulis <augulis.darius@gmail.com>, Teltonika, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <mach/mxc_timer.h> - -#ifndef __ARCH_IMX_MTD_XIP_H__ -#define __ARCH_IMX_MTD_XIP_H__ - -#ifdef CONFIG_ARCH_MX1 -/* AITC registers */ -#define AITC_BASE IO_ADDRESS(AVIC_BASE_ADDR) -#define NIPNDH (AITC_BASE + 0x58) -#define NIPNDL (AITC_BASE + 0x5C) -#define INTENABLEH (AITC_BASE + 0x10) -#define INTENABLEL (AITC_BASE + 0x14) -/* MTD macros */ -#define xip_irqpending() ((__raw_readl(INTENABLEH) & __raw_readl(NIPNDH)) \ - || (__raw_readl(INTENABLEL) & __raw_readl(NIPNDL))) -#define xip_currtime() (__raw_readl(TIMER_BASE + MXC_TCN)) -#define xip_elapsed_since(x) (signed)((__raw_readl(TIMER_BASE + MXC_TCN) - (x)) / 96) -#define xip_cpu_idle() asm volatile ("mcr p15, 0, %0, c7, c0, 4" :: "r" (0)) -#endif /* CONFIG_ARCH_MX1 */ - -#endif /* __ARCH_IMX_MTD_XIP_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h index 1b2890a5c45..5eba7e6785d 100644 --- a/arch/arm/plat-mxc/include/mach/mx1.h +++ b/arch/arm/plat-mxc/include/mach/mx1.h @@ -9,156 +9,289 @@ * published by the Free Software Foundation. */ -#ifndef __ASM_ARCH_MXC_MX1_H__ -#define __ASM_ARCH_MXC_MX1_H__ +#ifndef __MACH_MX1_H__ +#define __MACH_MX1_H__ #include <mach/vmalloc.h> /* * Memory map */ -#define IMX_IO_PHYS 0x00200000 -#define IMX_IO_SIZE 0x00100000 -#define IMX_IO_BASE VMALLOC_END +#define MX1_IO_BASE_ADDR 0x00200000 +#define MX1_IO_SIZE SZ_1M +#define MX1_IO_BASE_ADDR_VIRT VMALLOC_END -#define IMX_CS0_PHYS 0x10000000 -#define IMX_CS0_SIZE 0x02000000 +#define MX1_CS0_PHYS 0x10000000 +#define MX1_CS0_SIZE 0x02000000 -#define IMX_CS1_PHYS 0x12000000 -#define IMX_CS1_SIZE 0x01000000 +#define MX1_CS1_PHYS 0x12000000 +#define MX1_CS1_SIZE 0x01000000 -#define IMX_CS2_PHYS 0x13000000 -#define IMX_CS2_SIZE 0x01000000 +#define MX1_CS2_PHYS 0x13000000 +#define MX1_CS2_SIZE 0x01000000 -#define IMX_CS3_PHYS 0x14000000 -#define IMX_CS3_SIZE 0x01000000 +#define MX1_CS3_PHYS 0x14000000 +#define MX1_CS3_SIZE 0x01000000 -#define IMX_CS4_PHYS 0x15000000 -#define IMX_CS4_SIZE 0x01000000 +#define MX1_CS4_PHYS 0x15000000 +#define MX1_CS4_SIZE 0x01000000 -#define IMX_CS5_PHYS 0x16000000 -#define IMX_CS5_SIZE 0x01000000 +#define MX1_CS5_PHYS 0x16000000 +#define MX1_CS5_SIZE 0x01000000 /* * Register BASEs, based on OFFSETs */ -#define AIPI1_BASE_ADDR (0x00000 + IMX_IO_PHYS) -#define WDT_BASE_ADDR (0x01000 + IMX_IO_PHYS) -#define TIM1_BASE_ADDR (0x02000 + IMX_IO_PHYS) -#define TIM2_BASE_ADDR (0x03000 + IMX_IO_PHYS) -#define RTC_BASE_ADDR (0x04000 + IMX_IO_PHYS) -#define LCDC_BASE_ADDR (0x05000 + IMX_IO_PHYS) -#define UART1_BASE_ADDR (0x06000 + IMX_IO_PHYS) -#define UART2_BASE_ADDR (0x07000 + IMX_IO_PHYS) -#define PWM_BASE_ADDR (0x08000 + IMX_IO_PHYS) -#define DMA_BASE_ADDR (0x09000 + IMX_IO_PHYS) -#define AIPI2_BASE_ADDR (0x10000 + IMX_IO_PHYS) -#define SIM_BASE_ADDR (0x11000 + IMX_IO_PHYS) -#define USBD_BASE_ADDR (0x12000 + IMX_IO_PHYS) -#define SPI1_BASE_ADDR (0x13000 + IMX_IO_PHYS) -#define MMC_BASE_ADDR (0x14000 + IMX_IO_PHYS) -#define ASP_BASE_ADDR (0x15000 + IMX_IO_PHYS) -#define BTA_BASE_ADDR (0x16000 + IMX_IO_PHYS) -#define I2C_BASE_ADDR (0x17000 + IMX_IO_PHYS) -#define SSI_BASE_ADDR (0x18000 + IMX_IO_PHYS) -#define SPI2_BASE_ADDR (0x19000 + IMX_IO_PHYS) -#define MSHC_BASE_ADDR (0x1A000 + IMX_IO_PHYS) -#define CCM_BASE_ADDR (0x1B000 + IMX_IO_PHYS) -#define SCM_BASE_ADDR (0x1B804 + IMX_IO_PHYS) -#define GPIO_BASE_ADDR (0x1C000 + IMX_IO_PHYS) -#define EIM_BASE_ADDR (0x20000 + IMX_IO_PHYS) -#define SDRAMC_BASE_ADDR (0x21000 + IMX_IO_PHYS) -#define MMA_BASE_ADDR (0x22000 + IMX_IO_PHYS) -#define AVIC_BASE_ADDR (0x23000 + IMX_IO_PHYS) -#define CSI_BASE_ADDR (0x24000 + IMX_IO_PHYS) +#define MX1_AIPI1_BASE_ADDR (0x00000 + MX1_IO_BASE_ADDR) +#define MX1_WDT_BASE_ADDR (0x01000 + MX1_IO_BASE_ADDR) +#define MX1_TIM1_BASE_ADDR (0x02000 + MX1_IO_BASE_ADDR) +#define MX1_TIM2_BASE_ADDR (0x03000 + MX1_IO_BASE_ADDR) +#define MX1_RTC_BASE_ADDR (0x04000 + MX1_IO_BASE_ADDR) +#define MX1_LCDC_BASE_ADDR (0x05000 + MX1_IO_BASE_ADDR) +#define MX1_UART1_BASE_ADDR (0x06000 + MX1_IO_BASE_ADDR) +#define MX1_UART2_BASE_ADDR (0x07000 + MX1_IO_BASE_ADDR) +#define MX1_PWM_BASE_ADDR (0x08000 + MX1_IO_BASE_ADDR) +#define MX1_DMA_BASE_ADDR (0x09000 + MX1_IO_BASE_ADDR) +#define MX1_AIPI2_BASE_ADDR (0x10000 + MX1_IO_BASE_ADDR) +#define MX1_SIM_BASE_ADDR (0x11000 + MX1_IO_BASE_ADDR) +#define MX1_USBD_BASE_ADDR (0x12000 + MX1_IO_BASE_ADDR) +#define MX1_SPI1_BASE_ADDR (0x13000 + MX1_IO_BASE_ADDR) +#define MX1_MMC_BASE_ADDR (0x14000 + MX1_IO_BASE_ADDR) +#define MX1_ASP_BASE_ADDR (0x15000 + MX1_IO_BASE_ADDR) +#define MX1_BTA_BASE_ADDR (0x16000 + MX1_IO_BASE_ADDR) +#define MX1_I2C_BASE_ADDR (0x17000 + MX1_IO_BASE_ADDR) +#define MX1_SSI_BASE_ADDR (0x18000 + MX1_IO_BASE_ADDR) +#define MX1_SPI2_BASE_ADDR (0x19000 + MX1_IO_BASE_ADDR) +#define MX1_MSHC_BASE_ADDR (0x1A000 + MX1_IO_BASE_ADDR) +#define MX1_CCM_BASE_ADDR (0x1B000 + MX1_IO_BASE_ADDR) +#define MX1_SCM_BASE_ADDR (0x1B804 + MX1_IO_BASE_ADDR) +#define MX1_GPIO_BASE_ADDR (0x1C000 + MX1_IO_BASE_ADDR) +#define MX1_EIM_BASE_ADDR (0x20000 + MX1_IO_BASE_ADDR) +#define MX1_SDRAMC_BASE_ADDR (0x21000 + MX1_IO_BASE_ADDR) +#define MX1_MMA_BASE_ADDR (0x22000 + MX1_IO_BASE_ADDR) +#define MX1_AVIC_BASE_ADDR (0x23000 + MX1_IO_BASE_ADDR) +#define MX1_CSI_BASE_ADDR (0x24000 + MX1_IO_BASE_ADDR) /* macro to get at IO space when running virtually */ -#define IO_ADDRESS(x) ((x) - IMX_IO_PHYS + IMX_IO_BASE) - -/* define macros needed for entry-macro.S */ -#define AVIC_IO_ADDRESS(x) IO_ADDRESS(x) +#define MX1_IO_ADDRESS(x) ( \ + IMX_IO_ADDRESS(x, MX1_IO)) /* fixed interrput numbers */ -#define INT_SOFTINT 0 -#define CSI_INT 6 -#define DSPA_MAC_INT 7 -#define DSPA_INT 8 -#define COMP_INT 9 -#define MSHC_XINT 10 -#define GPIO_INT_PORTA 11 -#define GPIO_INT_PORTB 12 -#define GPIO_INT_PORTC 13 -#define LCDC_INT 14 -#define SIM_INT 15 -#define SIM_DATA_INT 16 -#define RTC_INT 17 -#define RTC_SAMINT 18 -#define UART2_MINT_PFERR 19 -#define UART2_MINT_RTS 20 -#define UART2_MINT_DTR 21 -#define UART2_MINT_UARTC 22 -#define UART2_MINT_TX 23 -#define UART2_MINT_RX 24 -#define UART1_MINT_PFERR 25 -#define UART1_MINT_RTS 26 -#define UART1_MINT_DTR 27 -#define UART1_MINT_UARTC 28 -#define UART1_MINT_TX 29 -#define UART1_MINT_RX 30 -#define VOICE_DAC_INT 31 -#define VOICE_ADC_INT 32 -#define PEN_DATA_INT 33 -#define PWM_INT 34 -#define SDHC_INT 35 -#define I2C_INT 39 -#define CSPI_INT 41 -#define SSI_TX_INT 42 -#define SSI_TX_ERR_INT 43 -#define SSI_RX_INT 44 -#define SSI_RX_ERR_INT 45 -#define TOUCH_INT 46 -#define USBD_INT0 47 -#define USBD_INT1 48 -#define USBD_INT2 49 -#define USBD_INT3 50 -#define USBD_INT4 51 -#define USBD_INT5 52 -#define USBD_INT6 53 -#define BTSYS_INT 55 -#define BTTIM_INT 56 -#define BTWUI_INT 57 -#define TIM2_INT 58 -#define TIM1_INT 59 -#define DMA_ERR 60 -#define DMA_INT 61 -#define GPIO_INT_PORTD 62 -#define WDT_INT 63 +#define MX1_INT_SOFTINT 0 +#define MX1_CSI_INT 6 +#define MX1_DSPA_MAC_INT 7 +#define MX1_DSPA_INT 8 +#define MX1_COMP_INT 9 +#define MX1_MSHC_XINT 10 +#define MX1_GPIO_INT_PORTA 11 +#define MX1_GPIO_INT_PORTB 12 +#define MX1_GPIO_INT_PORTC 13 +#define MX1_LCDC_INT 14 +#define MX1_SIM_INT 15 +#define MX1_SIM_DATA_INT 16 +#define MX1_RTC_INT 17 +#define MX1_RTC_SAMINT 18 +#define MX1_UART2_MINT_PFERR 19 +#define MX1_UART2_MINT_RTS 20 +#define MX1_UART2_MINT_DTR 21 +#define MX1_UART2_MINT_UARTC 22 +#define MX1_UART2_MINT_TX 23 +#define MX1_UART2_MINT_RX 24 +#define MX1_UART1_MINT_PFERR 25 +#define MX1_UART1_MINT_RTS 26 +#define MX1_UART1_MINT_DTR 27 +#define MX1_UART1_MINT_UARTC 28 +#define MX1_UART1_MINT_TX 29 +#define MX1_UART1_MINT_RX 30 +#define MX1_VOICE_DAC_INT 31 +#define MX1_VOICE_ADC_INT 32 +#define MX1_PEN_DATA_INT 33 +#define MX1_PWM_INT 34 +#define MX1_SDHC_INT 35 +#define MX1_I2C_INT 39 +#define MX1_CSPI_INT 41 +#define MX1_SSI_TX_INT 42 +#define MX1_SSI_TX_ERR_INT 43 +#define MX1_SSI_RX_INT 44 +#define MX1_SSI_RX_ERR_INT 45 +#define MX1_TOUCH_INT 46 +#define MX1_USBD_INT0 47 +#define MX1_USBD_INT1 48 +#define MX1_USBD_INT2 49 +#define MX1_USBD_INT3 50 +#define MX1_USBD_INT4 51 +#define MX1_USBD_INT5 52 +#define MX1_USBD_INT6 53 +#define MX1_BTSYS_INT 55 +#define MX1_BTTIM_INT 56 +#define MX1_BTWUI_INT 57 +#define MX1_TIM2_INT 58 +#define MX1_TIM1_INT 59 +#define MX1_DMA_ERR 60 +#define MX1_DMA_INT 61 +#define MX1_GPIO_INT_PORTD 62 +#define MX1_WDT_INT 63 /* DMA */ -#define DMA_REQ_UART3_T 2 -#define DMA_REQ_UART3_R 3 -#define DMA_REQ_SSI2_T 4 -#define DMA_REQ_SSI2_R 5 -#define DMA_REQ_CSI_STAT 6 -#define DMA_REQ_CSI_R 7 -#define DMA_REQ_MSHC 8 -#define DMA_REQ_DSPA_DCT_DOUT 9 -#define DMA_REQ_DSPA_DCT_DIN 10 -#define DMA_REQ_DSPA_MAC 11 -#define DMA_REQ_EXT 12 -#define DMA_REQ_SDHC 13 -#define DMA_REQ_SPI1_R 14 -#define DMA_REQ_SPI1_T 15 -#define DMA_REQ_SSI_T 16 -#define DMA_REQ_SSI_R 17 -#define DMA_REQ_ASP_DAC 18 -#define DMA_REQ_ASP_ADC 19 -#define DMA_REQ_USP_EP(x) (20 + (x)) -#define DMA_REQ_SPI2_R 26 -#define DMA_REQ_SPI2_T 27 -#define DMA_REQ_UART2_T 28 -#define DMA_REQ_UART2_R 29 -#define DMA_REQ_UART1_T 30 -#define DMA_REQ_UART1_R 31 - -#endif /* __ASM_ARCH_MXC_MX1_H__ */ +#define MX1_DMA_REQ_UART3_T 2 +#define MX1_DMA_REQ_UART3_R 3 +#define MX1_DMA_REQ_SSI2_T 4 +#define MX1_DMA_REQ_SSI2_R 5 +#define MX1_DMA_REQ_CSI_STAT 6 +#define MX1_DMA_REQ_CSI_R 7 +#define MX1_DMA_REQ_MSHC 8 +#define MX1_DMA_REQ_DSPA_DCT_DOUT 9 +#define MX1_DMA_REQ_DSPA_DCT_DIN 10 +#define MX1_DMA_REQ_DSPA_MAC 11 +#define MX1_DMA_REQ_EXT 12 +#define MX1_DMA_REQ_SDHC 13 +#define MX1_DMA_REQ_SPI1_R 14 +#define MX1_DMA_REQ_SPI1_T 15 +#define MX1_DMA_REQ_SSI_T 16 +#define MX1_DMA_REQ_SSI_R 17 +#define MX1_DMA_REQ_ASP_DAC 18 +#define MX1_DMA_REQ_ASP_ADC 19 +#define MX1_DMA_REQ_USP_EP(x) (20 + (x)) +#define MX1_DMA_REQ_SPI2_R 26 +#define MX1_DMA_REQ_SPI2_T 27 +#define MX1_DMA_REQ_UART2_T 28 +#define MX1_DMA_REQ_UART2_R 29 +#define MX1_DMA_REQ_UART1_T 30 +#define MX1_DMA_REQ_UART1_R 31 + +/* + * This doesn't depend on IMX_NEEDS_DEPRECATED_SYMBOLS + * to not break drivers/usb/gadget/imx_udc. Should go + * away after this driver uses the new name. + */ +#define USBD_INT0 MX1_USBD_INT0 + +#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS +/* these should go away */ +#define IMX_IO_PHYS MX1_IO_BASE_ADDR +#define IMX_IO_SIZE MX1_IO_SIZE +#define IMX_IO_BASE MX1_IO_BASE_ADDR_VIRT +#define IMX_CS0_PHYS MX1_CS0_PHYS +#define IMX_CS0_SIZE MX1_CS0_SIZE +#define IMX_CS1_PHYS MX1_CS1_PHYS +#define IMX_CS1_SIZE MX1_CS1_SIZE +#define IMX_CS2_PHYS MX1_CS2_PHYS +#define IMX_CS2_SIZE MX1_CS2_SIZE +#define IMX_CS3_PHYS MX1_CS3_PHYS +#define IMX_CS3_SIZE MX1_CS3_SIZE +#define IMX_CS4_PHYS MX1_CS4_PHYS +#define IMX_CS4_SIZE MX1_CS4_SIZE +#define IMX_CS5_PHYS MX1_CS5_PHYS +#define IMX_CS5_SIZE MX1_CS5_SIZE +#define AIPI1_BASE_ADDR MX1_AIPI1_BASE_ADDR +#define WDT_BASE_ADDR MX1_WDT_BASE_ADDR +#define TIM1_BASE_ADDR MX1_TIM1_BASE_ADDR +#define TIM2_BASE_ADDR MX1_TIM2_BASE_ADDR +#define RTC_BASE_ADDR MX1_RTC_BASE_ADDR +#define LCDC_BASE_ADDR MX1_LCDC_BASE_ADDR +#define UART1_BASE_ADDR MX1_UART1_BASE_ADDR +#define UART2_BASE_ADDR MX1_UART2_BASE_ADDR +#define PWM_BASE_ADDR MX1_PWM_BASE_ADDR +#define DMA_BASE_ADDR MX1_DMA_BASE_ADDR +#define AIPI2_BASE_ADDR MX1_AIPI2_BASE_ADDR +#define SIM_BASE_ADDR MX1_SIM_BASE_ADDR +#define USBD_BASE_ADDR MX1_USBD_BASE_ADDR +#define SPI1_BASE_ADDR MX1_SPI1_BASE_ADDR +#define MMC_BASE_ADDR MX1_MMC_BASE_ADDR +#define ASP_BASE_ADDR MX1_ASP_BASE_ADDR +#define BTA_BASE_ADDR MX1_BTA_BASE_ADDR +#define I2C_BASE_ADDR MX1_I2C_BASE_ADDR +#define SSI_BASE_ADDR MX1_SSI_BASE_ADDR +#define SPI2_BASE_ADDR MX1_SPI2_BASE_ADDR +#define MSHC_BASE_ADDR MX1_MSHC_BASE_ADDR +#define CCM_BASE_ADDR MX1_CCM_BASE_ADDR +#define SCM_BASE_ADDR MX1_SCM_BASE_ADDR +#define GPIO_BASE_ADDR MX1_GPIO_BASE_ADDR +#define EIM_BASE_ADDR MX1_EIM_BASE_ADDR +#define SDRAMC_BASE_ADDR MX1_SDRAMC_BASE_ADDR +#define MMA_BASE_ADDR MX1_MMA_BASE_ADDR +#define AVIC_BASE_ADDR MX1_AVIC_BASE_ADDR +#define CSI_BASE_ADDR MX1_CSI_BASE_ADDR +#define IO_ADDRESS(x) MX1_IO_ADDRESS(x) +#define AVIC_IO_ADDRESS(x) IO_ADDRESS(x) +#define INT_SOFTINT MX1_INT_SOFTINT +#define CSI_INT MX1_CSI_INT +#define DSPA_MAC_INT MX1_DSPA_MAC_INT +#define DSPA_INT MX1_DSPA_INT +#define COMP_INT MX1_COMP_INT +#define MSHC_XINT MX1_MSHC_XINT +#define GPIO_INT_PORTA MX1_GPIO_INT_PORTA +#define GPIO_INT_PORTB MX1_GPIO_INT_PORTB +#define GPIO_INT_PORTC MX1_GPIO_INT_PORTC +#define LCDC_INT MX1_LCDC_INT +#define SIM_INT MX1_SIM_INT +#define SIM_DATA_INT MX1_SIM_DATA_INT +#define RTC_INT MX1_RTC_INT +#define RTC_SAMINT MX1_RTC_SAMINT +#define UART2_MINT_PFERR MX1_UART2_MINT_PFERR +#define UART2_MINT_RTS MX1_UART2_MINT_RTS +#define UART2_MINT_DTR MX1_UART2_MINT_DTR +#define UART2_MINT_UARTC MX1_UART2_MINT_UARTC +#define UART2_MINT_TX MX1_UART2_MINT_TX +#define UART2_MINT_RX MX1_UART2_MINT_RX +#define UART1_MINT_PFERR MX1_UART1_MINT_PFERR +#define UART1_MINT_RTS MX1_UART1_MINT_RTS +#define UART1_MINT_DTR MX1_UART1_MINT_DTR +#define UART1_MINT_UARTC MX1_UART1_MINT_UARTC +#define UART1_MINT_TX MX1_UART1_MINT_TX +#define UART1_MINT_RX MX1_UART1_MINT_RX +#define VOICE_DAC_INT MX1_VOICE_DAC_INT +#define VOICE_ADC_INT MX1_VOICE_ADC_INT +#define PEN_DATA_INT MX1_PEN_DATA_INT +#define PWM_INT MX1_PWM_INT +#define SDHC_INT MX1_SDHC_INT +#define I2C_INT MX1_I2C_INT +#define CSPI_INT MX1_CSPI_INT +#define SSI_TX_INT MX1_SSI_TX_INT +#define SSI_TX_ERR_INT MX1_SSI_TX_ERR_INT +#define SSI_RX_INT MX1_SSI_RX_INT +#define SSI_RX_ERR_INT MX1_SSI_RX_ERR_INT +#define TOUCH_INT MX1_TOUCH_INT +#define USBD_INT1 MX1_USBD_INT1 +#define USBD_INT2 MX1_USBD_INT2 +#define USBD_INT3 MX1_USBD_INT3 +#define USBD_INT4 MX1_USBD_INT4 +#define USBD_INT5 MX1_USBD_INT5 +#define USBD_INT6 MX1_USBD_INT6 +#define BTSYS_INT MX1_BTSYS_INT +#define BTTIM_INT MX1_BTTIM_INT +#define BTWUI_INT MX1_BTWUI_INT +#define TIM2_INT MX1_TIM2_INT +#define TIM1_INT MX1_TIM1_INT +#define DMA_ERR MX1_DMA_ERR +#define DMA_INT MX1_DMA_INT +#define GPIO_INT_PORTD MX1_GPIO_INT_PORTD +#define WDT_INT MX1_WDT_INT +#define DMA_REQ_UART3_T MX1_DMA_REQ_UART3_T +#define DMA_REQ_UART3_R MX1_DMA_REQ_UART3_R +#define DMA_REQ_SSI2_T MX1_DMA_REQ_SSI2_T +#define DMA_REQ_SSI2_R MX1_DMA_REQ_SSI2_R +#define DMA_REQ_CSI_STAT MX1_DMA_REQ_CSI_STAT +#define DMA_REQ_CSI_R MX1_DMA_REQ_CSI_R +#define DMA_REQ_MSHC MX1_DMA_REQ_MSHC +#define DMA_REQ_DSPA_DCT_DOUT MX1_DMA_REQ_DSPA_DCT_DOUT +#define DMA_REQ_DSPA_DCT_DIN MX1_DMA_REQ_DSPA_DCT_DIN +#define DMA_REQ_DSPA_MAC MX1_DMA_REQ_DSPA_MAC +#define DMA_REQ_EXT MX1_DMA_REQ_EXT +#define DMA_REQ_SDHC MX1_DMA_REQ_SDHC +#define DMA_REQ_SPI1_R MX1_DMA_REQ_SPI1_R +#define DMA_REQ_SPI1_T MX1_DMA_REQ_SPI1_T +#define DMA_REQ_SSI_T MX1_DMA_REQ_SSI_T +#define DMA_REQ_SSI_R MX1_DMA_REQ_SSI_R +#define DMA_REQ_ASP_DAC MX1_DMA_REQ_ASP_DAC +#define DMA_REQ_ASP_ADC MX1_DMA_REQ_ASP_ADC +#define DMA_REQ_USP_EP(x) MX1_DMA_REQ_USP_EP(x) +#define DMA_REQ_SPI2_R MX1_DMA_REQ_SPI2_R +#define DMA_REQ_SPI2_T MX1_DMA_REQ_SPI2_T +#define DMA_REQ_UART2_T MX1_DMA_REQ_UART2_T +#define DMA_REQ_UART2_R MX1_DMA_REQ_UART2_R +#define DMA_REQ_UART1_T MX1_DMA_REQ_UART1_T +#define DMA_REQ_UART1_R MX1_DMA_REQ_UART1_R +#endif /* ifdef IMX_NEEDS_DEPRECATED_SYMBOLS */ + +#endif /* ifndef __MACH_MX1_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx21.h b/arch/arm/plat-mxc/include/mach/mx21.h index bb297d8765a..ed98b9c9f38 100644 --- a/arch/arm/plat-mxc/include/mach/mx21.h +++ b/arch/arm/plat-mxc/include/mach/mx21.h @@ -22,8 +22,8 @@ * MA 02110-1301, USA. */ -#ifndef __ASM_ARCH_MXC_MX21_H__ -#define __ASM_ARCH_MXC_MX21_H__ +#ifndef __MACH_MX21_H__ +#define __MACH_MX21_H__ #define MX21_AIPI_BASE_ADDR 0x10000000 #define MX21_AIPI_BASE_ADDR_VIRT 0xf4000000 @@ -92,6 +92,11 @@ #define MX21_IRAM_BASE_ADDR 0xffffe800 /* internal ram */ +#define MX21_IO_ADDRESS(x) ( \ + IMX_IO_ADDRESS(x, MX21_AIPI) ?: \ + IMX_IO_ADDRESS(x, MX21_SAHB1) ?: \ + IMX_IO_ADDRESS(x, MX21_X_MEMC)) + /* fixed interrupt numbers */ #define MX21_INT_CSPI3 6 #define MX21_INT_GPIO 8 @@ -179,6 +184,7 @@ #define MX21_DMA_REQ_CSI_STAT 30 #define MX21_DMA_REQ_CSI_RX 31 +#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS /* these should go away */ #define SDRAM_BASE_ADDR MX21_SDRAM_BASE_ADDR #define CSD1_BASE_ADDR MX21_CSD1_BASE_ADDR @@ -211,5 +217,6 @@ #define DMA_REQ_FIRI_RX MX21_DMA_REQ_FIRI_RX #define DMA_REQ_BMI_TX MX21_DMA_REQ_BMI_TX #define DMA_REQ_BMI_RX MX21_DMA_REQ_BMI_RX +#endif -#endif /* __ASM_ARCH_MXC_MX21_H__ */ +#endif /* ifndef __MACH_MX21_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h index 854e2dc5848..4eb6e334bda 100644 --- a/arch/arm/plat-mxc/include/mach/mx25.h +++ b/arch/arm/plat-mxc/include/mach/mx25.h @@ -22,27 +22,27 @@ #define MX25_GPIO3_BASE_ADDR_VIRT (MX25_AIPS2_BASE_ADDR_VIRT + 0xa4000) #define MX25_GPIO4_BASE_ADDR_VIRT (MX25_AIPS2_BASE_ADDR_VIRT + 0x9c000) -#define MX25_AIPS1_IO_ADDRESS(x) \ - (((x) - MX25_AIPS1_BASE_ADDR) + MX25_AIPS1_BASE_ADDR_VIRT) -#define MX25_AIPS2_IO_ADDRESS(x) \ - (((x) - MX25_AIPS2_BASE_ADDR) + MX25_AIPS2_BASE_ADDR_VIRT) -#define MX25_AVIC_IO_ADDRESS(x) \ - (((x) - MX25_AVIC_BASE_ADDR) + MX25_AVIC_BASE_ADDR_VIRT) +#define MX25_IO_ADDRESS(x) ( \ + IMX_IO_ADDRESS(x, MX25_AIPS1) ?: \ + IMX_IO_ADDRESS(x, MX25_AIPS2) ?: \ + IMX_IO_ADDRESS(x, MX25_AVIC)) -#define __in_range(addr, name) ((addr) >= name##_BASE_ADDR && (addr) < name##_BASE_ADDR + name##_SIZE) - -#define MX25_IO_ADDRESS(x) \ - (void __force __iomem *) \ - (__in_range(x, MX25_AIPS1) ? MX25_AIPS1_IO_ADDRESS(x) : \ - __in_range(x, MX25_AIPS2) ? MX25_AIPS2_IO_ADDRESS(x) : \ - __in_range(x, MX25_AVIC) ? MX25_AVIC_IO_ADDRESS(x) : \ - 0xDEADBEEF) - -#define UART1_BASE_ADDR 0x43f90000 -#define UART2_BASE_ADDR 0x43f94000 +#define MX25_UART1_BASE_ADDR 0x43f90000 +#define MX25_UART2_BASE_ADDR 0x43f94000 #define MX25_FEC_BASE_ADDR 0x50038000 +#define MX25_NFC_BASE_ADDR 0xbb000000 +#define MX25_DRYICE_BASE_ADDR 0x53ffc000 +#define MX25_LCDC_BASE_ADDR 0x53fbc000 +#define MX25_INT_DRYICE 25 #define MX25_INT_FEC 57 +#define MX25_INT_NANDFC 33 +#define MX25_INT_LCDC 39 + +#if defined(IMX_NEEDS_DEPRECATED_SYMBOLS) +#define UART1_BASE_ADDR MX25_UART1_BASE_ADDR +#define UART2_BASE_ADDR MX25_UART2_BASE_ADDR +#endif -#endif /* __MACH_MX25_H__ */ +#endif /* ifndef __MACH_MX25_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h index e2ae19f5171..bae9cd75bee 100644 --- a/arch/arm/plat-mxc/include/mach/mx27.h +++ b/arch/arm/plat-mxc/include/mach/mx27.h @@ -21,8 +21,12 @@ * MA 02110-1301, USA. */ -#ifndef __ASM_ARCH_MXC_MX27_H__ -#define __ASM_ARCH_MXC_MX27_H__ +#ifndef __MACH_MX27_H__ +#define __MACH_MX27_H__ + +#ifndef __ASSEMBLER__ +#include <linux/io.h> +#endif #define MX27_AIPI_BASE_ADDR 0x10000000 #define MX27_AIPI_BASE_ADDR_VIRT 0xf4000000 @@ -109,11 +113,31 @@ #define MX27_M3IF_BASE_ADDR (MX27_X_MEMC_BASE_ADDR + 0x3000) #define MX27_PCMCIA_CTL_BASE_ADDR (MX27_X_MEMC_BASE_ADDR + 0x4000) +#define MX27_WEIM_CSCRx_BASE_ADDR(cs) (MX27_WEIM_BASE_ADDR + (cs) * 0x10) +#define MX27_WEIM_CSCRxU(cs) (MX27_WEIM_CSCRx_BASE_ADDR(cs)) +#define MX27_WEIM_CSCRxL(cs) (MX27_WEIM_CSCRx_BASE_ADDR(cs) + 0x4) +#define MX27_WEIM_CSCRxA(cs) (MX27_WEIM_CSCRx_BASE_ADDR(cs) + 0x8) + #define MX27_PCMCIA_MEM_BASE_ADDR 0xdc000000 /* IRAM */ #define MX27_IRAM_BASE_ADDR 0xffff4c00 /* internal ram */ +#define MX27_IO_ADDRESS(x) ( \ + IMX_IO_ADDRESS(x, MX27_AIPI) ?: \ + IMX_IO_ADDRESS(x, MX27_SAHB1) ?: \ + IMX_IO_ADDRESS(x, MX27_X_MEMC)) + +#ifndef __ASSEMBLER__ +static inline void mx27_setup_weimcs(size_t cs, + unsigned upper, unsigned lower, unsigned addional) +{ + __raw_writel(upper, MX27_IO_ADDRESS(MX27_WEIM_CSCRxU(cs))); + __raw_writel(lower, MX27_IO_ADDRESS(MX27_WEIM_CSCRxL(cs))); + __raw_writel(addional, MX27_IO_ADDRESS(MX27_WEIM_CSCRxA(cs))); +} +#endif + /* fixed interrupt numbers */ #define MX27_INT_I2C2 1 #define MX27_INT_GPT6 2 @@ -225,6 +249,7 @@ extern int mx27_revision(void); #endif +#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS /* these should go away */ #define MSHC_BASE_ADDR MX27_MSHC_BASE_ADDR #define GPT5_BASE_ADDR MX27_GPT5_BASE_ADDR @@ -292,5 +317,6 @@ extern int mx27_revision(void); #define DMA_REQ_UART6_RX MX27_DMA_REQ_UART6_RX #define DMA_REQ_SDHC3 MX27_DMA_REQ_SDHC3 #define DMA_REQ_NFC MX27_DMA_REQ_NFC +#endif -#endif /* __ASM_ARCH_MXC_MX27_H__ */ +#endif /* ifndef __MACH_MX27_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx2x.h b/arch/arm/plat-mxc/include/mach/mx2x.h index f2eaf140ed0..afb895a0b5b 100644 --- a/arch/arm/plat-mxc/include/mach/mx2x.h +++ b/arch/arm/plat-mxc/include/mach/mx2x.h @@ -20,8 +20,8 @@ * MA 02110-1301, USA. */ -#ifndef __ASM_ARCH_MXC_MX2x_H__ -#define __ASM_ARCH_MXC_MX2x_H__ +#ifndef __MACH_MX2x_H__ +#define __MACH_MX2x_H__ /* The following addresses are common between i.MX21 and i.MX27 */ @@ -176,6 +176,7 @@ #define MX2x_DMA_REQ_CSI_STAT 30 #define MX2x_DMA_REQ_CSI_RX 31 +#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS /* these should go away */ #define AIPI_BASE_ADDR MX2x_AIPI_BASE_ADDR #define AIPI_BASE_ADDR_VIRT MX2x_AIPI_BASE_ADDR_VIRT @@ -287,5 +288,6 @@ #define DMA_REQ_UART1_TX MX2x_DMA_REQ_UART1_TX #define DMA_REQ_CSI_STAT MX2x_DMA_REQ_CSI_STAT #define DMA_REQ_CSI_RX MX2x_DMA_REQ_CSI_RX +#endif -#endif /* __ASM_ARCH_MXC_MX2x_H__ */ +#endif /* ifndef __MACH_MX2x_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h index b8b47d139eb..fb90e119c2b 100644 --- a/arch/arm/plat-mxc/include/mach/mx31.h +++ b/arch/arm/plat-mxc/include/mach/mx31.h @@ -1,3 +1,10 @@ +#ifndef __MACH_MX31_H__ +#define __MACH_MX31_H__ + +#ifndef __ASSEMBLER__ +#include <linux/io.h> +#endif + /* * IRAM */ @@ -107,8 +114,30 @@ #define MX31_EMI_CTL_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x4000) #define MX31_PCMCIA_CTL_BASE_ADDR MX31_EMI_CTL_BASE_ADDR +#define MX31_WEIM_CSCRx_BASE_ADDR(cs) (MX31_WEIM_BASE_ADDR + (cs) * 0x10) +#define MX31_WEIM_CSCRxU(cs) (MX31_WEIM_CSCRx_BASE_ADDR(cs)) +#define MX31_WEIM_CSCRxL(cs) (MX31_WEIM_CSCRx_BASE_ADDR(cs) + 0x4) +#define MX31_WEIM_CSCRxA(cs) (MX31_WEIM_CSCRx_BASE_ADDR(cs) + 0x8) + #define MX31_PCMCIA_MEM_BASE_ADDR 0xbc000000 +#define MX31_IO_ADDRESS(x) ( \ + IMX_IO_ADDRESS(x, MX31_AIPS1) ?: \ + IMX_IO_ADDRESS(x, MX31_AIPS2) ?: \ + IMX_IO_ADDRESS(x, MX31_AVIC) ?: \ + IMX_IO_ADDRESS(x, MX31_X_MEMC) ?: \ + IMX_IO_ADDRESS(x, MX31_SPBA0)) + +#ifndef __ASSEMBLER__ +static inline void mx31_setup_weimcs(size_t cs, + unsigned upper, unsigned lower, unsigned addional) +{ + __raw_writel(upper, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(cs))); + __raw_writel(lower, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(cs))); + __raw_writel(addional, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(cs))); +} +#endif + #define MX31_INT_I2C3 3 #define MX31_INT_I2C2 4 #define MX31_INT_MPEG4_ENCODER 5 @@ -186,6 +215,7 @@ #define MX31_SYSTEM_REV_MIN MX31_CHIP_REV_1_0 #define MX31_SYSTEM_REV_NUM 3 +#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS /* these should go away */ #define ATA_BASE_ADDR MX31_ATA_BASE_ADDR #define UART4_BASE_ADDR MX31_UART4_BASE_ADDR @@ -216,3 +246,6 @@ #define MXC_INT_UART5 MX31_INT_UART5 #define MXC_INT_CCM MX31_INT_CCM #define MXC_INT_PCMCIA MX31_INT_PCMCIA +#endif + +#endif /* ifndef __MACH_MX31_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h index af871bce35b..526a55842ae 100644 --- a/arch/arm/plat-mxc/include/mach/mx35.h +++ b/arch/arm/plat-mxc/include/mach/mx35.h @@ -1,3 +1,5 @@ +#ifndef __MACH_MX35_H__ +#define __MACH_MX35_H__ /* * IRAM */ @@ -104,6 +106,13 @@ #define MX35_NFC_BASE_ADDR 0xbb000000 #define MX35_PCMCIA_MEM_BASE_ADDR 0xbc000000 +#define MX35_IO_ADDRESS(x) ( \ + IMX_IO_ADDRESS(x, MX35_AIPS1) ?: \ + IMX_IO_ADDRESS(x, MX35_AIPS2) ?: \ + IMX_IO_ADDRESS(x, MX35_AVIC) ?: \ + IMX_IO_ADDRESS(x, MX35_X_MEMC) ?: \ + IMX_IO_ADDRESS(x, MX35_SPBA0)) + /* * Interrupt numbers */ @@ -180,6 +189,7 @@ #define MX35_SYSTEM_REV_MIN MX35_CHIP_REV_1_0 #define MX35_SYSTEM_REV_NUM 3 +#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS /* these should go away */ #define MXC_FEC_BASE_ADDR MX35_FEC_BASE_ADDR #define MXC_INT_OWIRE MX35_INT_OWIRE @@ -195,3 +205,6 @@ #define MXC_INT_MLB MX35_INT_MLB #define MXC_INT_SPDIF MX35_INT_SPDIF #define MXC_INT_FEC MX35_INT_FEC +#endif + +#endif /* ifndef __MACH_MX35_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h index be69272407a..7a356de385f 100644 --- a/arch/arm/plat-mxc/include/mach/mx3x.h +++ b/arch/arm/plat-mxc/include/mach/mx3x.h @@ -8,8 +8,8 @@ * published by the Free Software Foundation. */ -#ifndef __ASM_ARCH_MXC_MX31_H__ -#define __ASM_ARCH_MXC_MX31_H__ +#ifndef __MACH_MX3x_H__ +#define __MACH_MX3x_H__ /* * MX31 memory map: @@ -269,6 +269,7 @@ static inline int mx31_revision(void) } #endif +#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS /* these should go away */ #define L2CC_BASE_ADDR MX3x_L2CC_BASE_ADDR #define L2CC_SIZE MX3x_L2CC_SIZE @@ -401,5 +402,6 @@ static inline int mx31_revision(void) #define CHIP_REV_3_2 MX3x_CHIP_REV_3_2 #define SYSTEM_REV_MIN MX3x_SYSTEM_REV_MIN #define SYSTEM_REV_NUM MX3x_SYSTEM_REV_NUM +#endif -#endif /* __ASM_ARCH_MXC_MX31_H__ */ +#endif /* ifndef __MACH_MX3x_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx51.h b/arch/arm/plat-mxc/include/mach/mx51.h new file mode 100644 index 00000000000..771532b6b4a --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/mx51.h @@ -0,0 +1,454 @@ +#ifndef __ASM_ARCH_MXC_MX51_H__ +#define __ASM_ARCH_MXC_MX51_H__ + +/* + * MX51 memory map: + * + * + * Virt Phys Size What + * --------------------------------------------------------------------------- + * FA3E0000 1FFE0000 128K IRAM (SCCv2 RAM) + * 30000000 256M GPU + * 40000000 512M IPU + * FA200000 60000000 1M DEBUG + * FB100000 70000000 1M SPBA 0 + * FB000000 73F00000 1M AIPS 1 + * FB200000 83F00000 1M AIPS 2 + * FA100000 8FFFC000 16K TZIC (interrupt controller) + * 90000000 256M CSD0 SDRAM/DDR + * A0000000 256M CSD1 SDRAM/DDR + * B0000000 128M CS0 Flash + * B8000000 128M CS1 Flash + * C0000000 128M CS2 Flash + * C8000000 64M CS3 Flash + * CC000000 32M CS4 SRAM + * CE000000 32M CS5 SRAM + * F9000000 CFFF0000 64K NFC (NAND Flash AXI) + * + */ + +/* + * IRAM + */ +#define MX51_IRAM_BASE_ADDR 0x1FFE0000 /* internal ram */ +#define MX51_IRAM_BASE_ADDR_VIRT 0xFA3E0000 +#define MX51_IRAM_PARTITIONS 16 +#define MX51_IRAM_PARTITIONS_TO1 12 +#define MX51_IRAM_SIZE (MX51_IRAM_PARTITIONS * SZ_8K) /* 128KB */ + +/* + * NFC + */ +#define MX51_NFC_AXI_BASE_ADDR 0xCFFF0000 /* NAND flash AXI */ +#define MX51_NFC_AXI_BASE_ADDR_VIRT 0xF9000000 +#define MX51_NFC_AXI_SIZE SZ_64K + +/* + * Graphics Memory of GPU + */ +#define MX51_GPU_BASE_ADDR 0x20000000 +#define MX51_GPU2D_BASE_ADDR 0xD0000000 + +#define MX51_TZIC_BASE_ADDR 0x8FFFC000 +#define MX51_TZIC_BASE_ADDR_VIRT 0xFA100000 +#define MX51_TZIC_SIZE SZ_16K + +#define MX51_DEBUG_BASE_ADDR 0x60000000 +#define MX51_DEBUG_BASE_ADDR_VIRT 0xFA200000 +#define MX51_DEBUG_SIZE SZ_1M +#define MX51_ETB_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00001000) +#define MX51_ETM_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00002000) +#define MX51_TPIU_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00003000) +#define MX51_CTI0_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00004000) +#define MX51_CTI1_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00005000) +#define MX51_CTI2_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00006000) +#define MX51_CTI3_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00007000) +#define MX51_CORTEX_DBG_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00008000) + +/* + * SPBA global module enabled #0 + */ +#define MX51_SPBA0_BASE_ADDR 0x70000000 +#define MX51_SPBA0_BASE_ADDR_VIRT 0xFB100000 +#define MX51_SPBA0_SIZE SZ_1M + +#define MX51_MMC_SDHC1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00004000) +#define MX51_MMC_SDHC2_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00008000) +#define MX51_UART3_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x0000C000) +#define MX51_CSPI1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00010000) +#define MX51_SSI2_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00014000) +#define MX51_MMC_SDHC3_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00020000) +#define MX51_MMC_SDHC4_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00024000) +#define MX51_SPDIF_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00028000) +#define MX51_ATA_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00030000) +#define MX51_SLIM_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00034000) +#define MX51_HSI2C_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00038000) +#define MX51_SPBA_CTRL_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x0003C000) + +/* + * defines for SPBA modules + */ +#define MX51_SPBA_SDHC1 0x04 +#define MX51_SPBA_SDHC2 0x08 +#define MX51_SPBA_UART3 0x0C +#define MX51_SPBA_CSPI1 0x10 +#define MX51_SPBA_SSI2 0x14 +#define MX51_SPBA_SDHC3 0x20 +#define MX51_SPBA_SDHC4 0x24 +#define MX51_SPBA_SPDIF 0x28 +#define MX51_SPBA_ATA 0x30 +#define MX51_SPBA_SLIM 0x34 +#define MX51_SPBA_HSI2C 0x38 +#define MX51_SPBA_CTRL 0x3C + +/* + * AIPS 1 + */ +#define MX51_AIPS1_BASE_ADDR 0x73F00000 +#define MX51_AIPS1_BASE_ADDR_VIRT 0xFB000000 +#define MX51_AIPS1_SIZE SZ_1M + +#define MX51_OTG_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00080000) +#define MX51_GPIO1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00084000) +#define MX51_GPIO2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00088000) +#define MX51_GPIO3_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x0008C000) +#define MX51_GPIO4_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00090000) +#define MX51_KPP_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00094000) +#define MX51_WDOG_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00098000) +#define MX51_WDOG2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x0009C000) +#define MX51_GPT1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000A0000) +#define MX51_SRTC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000A4000) +#define MX51_IOMUXC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000A8000) +#define MX51_EPIT1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000AC000) +#define MX51_EPIT2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000B0000) +#define MX51_PWM1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000B4000) +#define MX51_PWM2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000B8000) +#define MX51_UART1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000BC000) +#define MX51_UART2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000C0000) +#define MX51_SRC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000D0000) +#define MX51_CCM_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000D4000) +#define MX51_GPC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000D8000) + +/* + * Defines for modules using static and dynamic DMA channels + */ +#define MX51_MXC_DMA_CHANNEL_IRAM 30 +#define MX51_MXC_DMA_CHANNEL_SPDIF_TX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_UART1_RX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_UART1_TX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_UART2_RX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_UART2_TX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_UART3_RX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_UART3_TX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_MMC1 MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_MMC2 MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_SSI1_RX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_SSI1_TX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_SSI2_RX MXC_DMA_DYNAMIC_CHANNEL +#ifdef CONFIG_SDMA_IRAM +#define MX51_MXC_DMA_CHANNEL_SSI2_TX (MX51_MXC_DMA_CHANNEL_IRAM + 1) +#else /*CONFIG_SDMA_IRAM */ +#define MX51_MXC_DMA_CHANNEL_SSI2_TX MXC_DMA_DYNAMIC_CHANNEL +#endif /*CONFIG_SDMA_IRAM */ +#define MX51_MXC_DMA_CHANNEL_CSPI1_RX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_CSPI1_TX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_CSPI2_RX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_CSPI2_TX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_CSPI3_RX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_CSPI3_TX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_ATA_RX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_ATA_TX MXC_DMA_DYNAMIC_CHANNEL +#define MX51_MXC_DMA_CHANNEL_MEMORY MXC_DMA_DYNAMIC_CHANNEL + +/* + * AIPS 2 + */ +#define MX51_AIPS2_BASE_ADDR 0x83F00000 +#define MX51_AIPS2_BASE_ADDR_VIRT 0xFB200000 +#define MX51_AIPS2_SIZE SZ_1M + +#define MX51_PLL1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00080000) +#define MX51_PLL2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00084000) +#define MX51_PLL3_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00088000) +#define MX51_AHBMAX_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00094000) +#define MX51_IIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00098000) +#define MX51_CSU_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x0009C000) +#define MX51_ARM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000A0000) +#define MX51_OWIRE_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000A4000) +#define MX51_FIRI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000A8000) +#define MX51_CSPI2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000AC000) +#define MX51_SDMA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000B0000) +#define MX51_SCC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000B4000) +#define MX51_ROMCP_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000B8000) +#define MX51_RTIC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000BC000) +#define MX51_CSPI3_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000C0000) +#define MX51_I2C2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000C4000) +#define MX51_I2C1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000C8000) +#define MX51_SSI1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000CC000) +#define MX51_AUDMUX_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000D0000) +#define MX51_M4IF_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000D8000) +#define MX51_ESDCTL_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000D9000) +#define MX51_WEIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000DA000) +#define MX51_NFC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000DB000) +#define MX51_EMI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000DBF00) +#define MX51_MIPI_HSC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000DC000) +#define MX51_ATA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000E0000) +#define MX51_SIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000E4000) +#define MX51_SSI3BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000E8000) +#define MX51_MXC_FEC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000EC000) +#define MX51_TVE_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000F0000) +#define MX51_VPU_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000F4000) +#define MX51_SAHARA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000F8000) + +/* + * Memory regions and CS + */ +#define MX51_GPU_CTRL_BASE_ADDR 0x30000000 +#define MX51_IPU_CTRL_BASE_ADDR 0x40000000 +#define MX51_CSD0_BASE_ADDR 0x90000000 +#define MX51_CSD1_BASE_ADDR 0xA0000000 +#define MX51_CS0_BASE_ADDR 0xB0000000 +#define MX51_CS1_BASE_ADDR 0xB8000000 +#define MX51_CS2_BASE_ADDR 0xC0000000 +#define MX51_CS3_BASE_ADDR 0xC8000000 +#define MX51_CS4_BASE_ADDR 0xCC000000 +#define MX51_CS5_BASE_ADDR 0xCE000000 + +/* Does given address belongs to the specified memory region? */ +#define ADDRESS_IN_REGION(addr, start, size) \ + (((addr) >= (start)) && ((addr) < (start)+(size))) + +/* Does given address belongs to the specified named `module'? */ +#define MX51_IS_MODULE(addr, module) \ + ADDRESS_IN_REGION(addr, MX51_ ## module ## _BASE_ADDR, \ + MX51_ ## module ## _SIZE) +/* + * This macro defines the physical to virtual address mapping for all the + * peripheral modules. It is used by passing in the physical address as x + * and returning the virtual address. If the physical address is not mapped, + * it returns 0xDEADBEEF + */ + +#define MX51_IO_ADDRESS(x) \ + (void __iomem *) \ + (MX51_IS_MODULE(x, IRAM) ? MX51_IRAM_IO_ADDRESS(x) : \ + MX51_IS_MODULE(x, TZIC) ? MX51_TZIC_IO_ADDRESS(x) : \ + MX51_IS_MODULE(x, DEBUG) ? MX51_DEBUG_IO_ADDRESS(x) : \ + MX51_IS_MODULE(x, SPBA0) ? MX51_SPBA0_IO_ADDRESS(x) : \ + MX51_IS_MODULE(x, AIPS1) ? MX51_AIPS1_IO_ADDRESS(x) : \ + MX51_IS_MODULE(x, AIPS2) ? MX51_AIPS2_IO_ADDRESS(x) : \ + MX51_IS_MODULE(x, NFC_AXI) ? MX51_NFC_AXI_IO_ADDRESS(x) : \ + 0xDEADBEEF) + +/* + * define the address mapping macros: in physical address order + */ +#define MX51_IRAM_IO_ADDRESS(x) \ + (((x) - MX51_IRAM_BASE_ADDR) + MX51_IRAM_BASE_ADDR_VIRT) + +#define MX51_TZIC_IO_ADDRESS(x) \ + (((x) - MX51_TZIC_BASE_ADDR) + MX51_TZIC_BASE_ADDR_VIRT) + +#define MX51_DEBUG_IO_ADDRESS(x) \ + (((x) - MX51_DEBUG_BASE_ADDR) + MX51_DEBUG_BASE_ADDR_VIRT) + +#define MX51_SPBA0_IO_ADDRESS(x) \ + (((x) - MX51_SPBA0_BASE_ADDR) + MX51_SPBA0_BASE_ADDR_VIRT) + +#define MX51_AIPS1_IO_ADDRESS(x) \ + (((x) - MX51_AIPS1_BASE_ADDR) + MX51_AIPS1_BASE_ADDR_VIRT) + +#define MX51_AIPS2_IO_ADDRESS(x) \ + (((x) - MX51_AIPS2_BASE_ADDR) + MX51_AIPS2_BASE_ADDR_VIRT) + +#define MX51_NFC_AXI_IO_ADDRESS(x) \ + (((x) - MX51_NFC_AXI_BASE_ADDR) + MX51_NFC_AXI_BASE_ADDR_VIRT) + +#define MX51_IS_MEM_DEVICE_NONSHARED(x) 0 + +/* + * DMA request assignments + */ +#define MX51_DMA_REQ_SSI3_TX1 47 +#define MX51_DMA_REQ_SSI3_RX1 46 +#define MX51_DMA_REQ_SPDIF 45 +#define MX51_DMA_REQ_UART3_TX 44 +#define MX51_DMA_REQ_UART3_RX 43 +#define MX51_DMA_REQ_SLIM_B_TX 42 +#define MX51_DMA_REQ_SDHC4 41 +#define MX51_DMA_REQ_SDHC3 40 +#define MX51_DMA_REQ_CSPI_TX 39 +#define MX51_DMA_REQ_CSPI_RX 38 +#define MX51_DMA_REQ_SSI3_TX2 37 +#define MX51_DMA_REQ_IPU 36 +#define MX51_DMA_REQ_SSI3_RX2 35 +#define MX51_DMA_REQ_EPIT2 34 +#define MX51_DMA_REQ_CTI2_1 33 +#define MX51_DMA_REQ_EMI_WR 32 +#define MX51_DMA_REQ_CTI2_0 31 +#define MX51_DMA_REQ_EMI_RD 30 +#define MX51_DMA_REQ_SSI1_TX1 29 +#define MX51_DMA_REQ_SSI1_RX1 28 +#define MX51_DMA_REQ_SSI1_TX2 27 +#define MX51_DMA_REQ_SSI1_RX2 26 +#define MX51_DMA_REQ_SSI2_TX1 25 +#define MX51_DMA_REQ_SSI2_RX1 24 +#define MX51_DMA_REQ_SSI2_TX2 23 +#define MX51_DMA_REQ_SSI2_RX2 22 +#define MX51_DMA_REQ_SDHC2 21 +#define MX51_DMA_REQ_SDHC1 20 +#define MX51_DMA_REQ_UART1_TX 19 +#define MX51_DMA_REQ_UART1_RX 18 +#define MX51_DMA_REQ_UART2_TX 17 +#define MX51_DMA_REQ_UART2_RX 16 +#define MX51_DMA_REQ_GPU 15 +#define MX51_DMA_REQ_EXTREQ1 14 +#define MX51_DMA_REQ_FIRI_TX 13 +#define MX51_DMA_REQ_FIRI_RX 12 +#define MX51_DMA_REQ_HS_I2C_RX 11 +#define MX51_DMA_REQ_HS_I2C_TX 10 +#define MX51_DMA_REQ_CSPI2_TX 9 +#define MX51_DMA_REQ_CSPI2_RX 8 +#define MX51_DMA_REQ_CSPI1_TX 7 +#define MX51_DMA_REQ_CSPI1_RX 6 +#define MX51_DMA_REQ_SLIM_B 5 +#define MX51_DMA_REQ_ATA_TX_END 4 +#define MX51_DMA_REQ_ATA_TX 3 +#define MX51_DMA_REQ_ATA_RX 2 +#define MX51_DMA_REQ_GPC 1 +#define MX51_DMA_REQ_VPU 0 + +/* + * Interrupt numbers + */ +#define MX51_MXC_INT_BASE 0 +#define MX51_MXC_INT_RESV0 0 +#define MX51_MXC_INT_MMC_SDHC1 1 +#define MX51_MXC_INT_MMC_SDHC2 2 +#define MX51_MXC_INT_MMC_SDHC3 3 +#define MX51_MXC_INT_MMC_SDHC4 4 +#define MX51_MXC_INT_RESV5 5 +#define MX51_MXC_INT_SDMA 6 +#define MX51_MXC_INT_IOMUX 7 +#define MX51_MXC_INT_NFC 8 +#define MX51_MXC_INT_VPU 9 +#define MX51_MXC_INT_IPU_ERR 10 +#define MX51_MXC_INT_IPU_SYN 11 +#define MX51_MXC_INT_GPU 12 +#define MX51_MXC_INT_RESV13 13 +#define MX51_MXC_INT_USB_H1 14 +#define MX51_MXC_INT_EMI 15 +#define MX51_MXC_INT_USB_H2 16 +#define MX51_MXC_INT_USB_H3 17 +#define MX51_MXC_INT_USB_OTG 18 +#define MX51_MXC_INT_SAHARA_H0 19 +#define MX51_MXC_INT_SAHARA_H1 20 +#define MX51_MXC_INT_SCC_SMN 21 +#define MX51_MXC_INT_SCC_STZ 22 +#define MX51_MXC_INT_SCC_SCM 23 +#define MX51_MXC_INT_SRTC_NTZ 24 +#define MX51_MXC_INT_SRTC_TZ 25 +#define MX51_MXC_INT_RTIC 26 +#define MX51_MXC_INT_CSU 27 +#define MX51_MXC_INT_SLIM_B 28 +#define MX51_MXC_INT_SSI1 29 +#define MX51_MXC_INT_SSI2 30 +#define MX51_MXC_INT_UART1 31 +#define MX51_MXC_INT_UART2 32 +#define MX51_MXC_INT_UART3 33 +#define MX51_MXC_INT_RESV34 34 +#define MX51_MXC_INT_RESV35 35 +#define MX51_MXC_INT_CSPI1 36 +#define MX51_MXC_INT_CSPI2 37 +#define MX51_MXC_INT_CSPI 38 +#define MX51_MXC_INT_GPT 39 +#define MX51_MXC_INT_EPIT1 40 +#define MX51_MXC_INT_EPIT2 41 +#define MX51_MXC_INT_GPIO1_INT7 42 +#define MX51_MXC_INT_GPIO1_INT6 43 +#define MX51_MXC_INT_GPIO1_INT5 44 +#define MX51_MXC_INT_GPIO1_INT4 45 +#define MX51_MXC_INT_GPIO1_INT3 46 +#define MX51_MXC_INT_GPIO1_INT2 47 +#define MX51_MXC_INT_GPIO1_INT1 48 +#define MX51_MXC_INT_GPIO1_INT0 49 +#define MX51_MXC_INT_GPIO1_LOW 50 +#define MX51_MXC_INT_GPIO1_HIGH 51 +#define MX51_MXC_INT_GPIO2_LOW 52 +#define MX51_MXC_INT_GPIO2_HIGH 53 +#define MX51_MXC_INT_GPIO3_LOW 54 +#define MX51_MXC_INT_GPIO3_HIGH 55 +#define MX51_MXC_INT_GPIO4_LOW 56 +#define MX51_MXC_INT_GPIO4_HIGH 57 +#define MX51_MXC_INT_WDOG1 58 +#define MX51_MXC_INT_WDOG2 59 +#define MX51_MXC_INT_KPP 60 +#define MX51_MXC_INT_PWM1 61 +#define MX51_MXC_INT_I2C1 62 +#define MX51_MXC_INT_I2C2 63 +#define MX51_MXC_INT_HS_I2C 64 +#define MX51_MXC_INT_RESV65 65 +#define MX51_MXC_INT_RESV66 66 +#define MX51_MXC_INT_SIM_IPB 67 +#define MX51_MXC_INT_SIM_DAT 68 +#define MX51_MXC_INT_IIM 69 +#define MX51_MXC_INT_ATA 70 +#define MX51_MXC_INT_CCM1 71 +#define MX51_MXC_INT_CCM2 72 +#define MX51_MXC_INT_GPC1 73 +#define MX51_MXC_INT_GPC2 74 +#define MX51_MXC_INT_SRC 75 +#define MX51_MXC_INT_NM 76 +#define MX51_MXC_INT_PMU 77 +#define MX51_MXC_INT_CTI_IRQ 78 +#define MX51_MXC_INT_CTI1_TG0 79 +#define MX51_MXC_INT_CTI1_TG1 80 +#define MX51_MXC_INT_MCG_ERR 81 +#define MX51_MXC_INT_MCG_TMR 82 +#define MX51_MXC_INT_MCG_FUNC 83 +#define MX51_MXC_INT_GPU2_IRQ 84 +#define MX51_MXC_INT_GPU2_BUSY 85 +#define MX51_MXC_INT_RESV86 86 +#define MX51_MXC_INT_FEC 87 +#define MX51_MXC_INT_OWIRE 88 +#define MX51_MXC_INT_CTI1_TG2 89 +#define MX51_MXC_INT_SJC 90 +#define MX51_MXC_INT_SPDIF 91 +#define MX51_MXC_INT_TVE 92 +#define MX51_MXC_INT_FIRI 93 +#define MX51_MXC_INT_PWM2 94 +#define MX51_MXC_INT_SLIM_EXP 95 +#define MX51_MXC_INT_SSI3 96 +#define MX51_MXC_INT_EMI_BOOT 97 +#define MX51_MXC_INT_CTI1_TG3 98 +#define MX51_MXC_INT_SMC_RX 99 +#define MX51_MXC_INT_VPU_IDLE 100 +#define MX51_MXC_INT_EMI_NFC 101 +#define MX51_MXC_INT_GPU_IDLE 102 + +/* silicon revisions specific to i.MX51 */ +#define MX51_CHIP_REV_1_0 0x10 +#define MX51_CHIP_REV_1_1 0x11 +#define MX51_CHIP_REV_1_2 0x12 +#define MX51_CHIP_REV_1_3 0x13 +#define MX51_CHIP_REV_2_0 0x20 +#define MX51_CHIP_REV_2_1 0x21 +#define MX51_CHIP_REV_2_2 0x22 +#define MX51_CHIP_REV_2_3 0x23 +#define MX51_CHIP_REV_3_0 0x30 +#define MX51_CHIP_REV_3_1 0x31 +#define MX51_CHIP_REV_3_2 0x32 + +/* Mandatory defines used globally */ + +#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS) + +extern unsigned int system_rev; + +static inline unsigned int mx51_revision(void) +{ + return system_rev; +} +#endif + +#endif /* __ASM_ARCH_MXC_MX51_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h index 51990536b84..a790bf21297 100644 --- a/arch/arm/plat-mxc/include/mach/mxc.h +++ b/arch/arm/plat-mxc/include/mach/mxc.h @@ -30,6 +30,7 @@ #define MXC_CPU_MX27 27 #define MXC_CPU_MX31 31 #define MXC_CPU_MX35 35 +#define MXC_CPU_MX51 51 #define MXC_CPU_MXC91231 91231 #ifndef __ASSEMBLY__ @@ -108,6 +109,18 @@ extern unsigned int __mxc_cpu_type; # define cpu_is_mx35() (0) #endif +#ifdef CONFIG_ARCH_MX5 +# ifdef mxc_cpu_type +# undef mxc_cpu_type +# define mxc_cpu_type __mxc_cpu_type +# else +# define mxc_cpu_type MXC_CPU_MX51 +# endif +# define cpu_is_mx51() (mxc_cpu_type == MXC_CPU_MX51) +#else +# define cpu_is_mx51() (0) +#endif + #ifdef CONFIG_ARCH_MXC91231 # ifdef mxc_cpu_type # undef mxc_cpu_type @@ -121,9 +134,10 @@ extern unsigned int __mxc_cpu_type; #endif #if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX2) -#define CSCR_U(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10) -#define CSCR_L(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x4) -#define CSCR_A(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x8) +/* These are deprecated, use mx[23][157]_setup_weimcs instead. */ +#define CSCR_U(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10)) +#define CSCR_L(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10 + 0x4)) +#define CSCR_A(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10 + 0x8)) #endif #define cpu_is_mx3() (cpu_is_mx31() || cpu_is_mx35() || cpu_is_mxc91231()) diff --git a/arch/arm/plat-mxc/include/mach/mxc91231.h b/arch/arm/plat-mxc/include/mach/mxc91231.h index 81484d1ef23..5182b986b78 100644 --- a/arch/arm/plat-mxc/include/mach/mxc91231.h +++ b/arch/arm/plat-mxc/include/mach/mxc91231.h @@ -184,60 +184,22 @@ #define MXC91231_CS4_BASE_ADDR 0xB4000000 #define MXC91231_CS5_BASE_ADDR 0xB6000000 -/* Is given address belongs to the specified memory region? */ -#define ADDRESS_IN_REGION(addr, start, size) \ - (((addr) >= (start)) && ((addr) < (start)+(size))) - -/* Is given address belongs to the specified named `module'? */ -#define MXC91231_IS_MODULE(addr, module) \ - ADDRESS_IN_REGION(addr, MXC91231_ ## module ## _BASE_ADDR, \ - MXC91231_ ## module ## _SIZE) /* * This macro defines the physical to virtual address mapping for all the * peripheral modules. It is used by passing in the physical address as x * and returning the virtual address. If the physical address is not mapped, - * it returns 0xDEADBEEF - */ - -#define MXC91231_IO_ADDRESS(x) \ - (void __iomem *) \ - (MXC91231_IS_MODULE(x, L2CC) ? MXC91231_L2CC_IO_ADDRESS(x) : \ - MXC91231_IS_MODULE(x, AIPS1) ? MXC91231_AIPS1_IO_ADDRESS(x) : \ - MXC91231_IS_MODULE(x, AIPS2) ? MXC91231_AIPS2_IO_ADDRESS(x) : \ - MXC91231_IS_MODULE(x, SPBA0) ? MXC91231_SPBA0_IO_ADDRESS(x) : \ - MXC91231_IS_MODULE(x, SPBA1) ? MXC91231_SPBA1_IO_ADDRESS(x) : \ - MXC91231_IS_MODULE(x, ROMP) ? MXC91231_ROMP_IO_ADDRESS(x) : \ - MXC91231_IS_MODULE(x, AVIC) ? MXC91231_AVIC_IO_ADDRESS(x) : \ - MXC91231_IS_MODULE(x, X_MEMC) ? MXC91231_X_MEMC_IO_ADDRESS(x) : \ - 0xDEADBEEF) - - -/* - * define the address mapping macros: in physical address order + * it returns 0. */ -#define MXC91231_L2CC_IO_ADDRESS(x) \ - (((x) - MXC91231_L2CC_BASE_ADDR) + MXC91231_L2CC_BASE_ADDR_VIRT) - -#define MXC91231_AIPS1_IO_ADDRESS(x) \ - (((x) - MXC91231_AIPS1_BASE_ADDR) + MXC91231_AIPS1_BASE_ADDR_VIRT) - -#define MXC91231_SPBA0_IO_ADDRESS(x) \ - (((x) - MXC91231_SPBA0_BASE_ADDR) + MXC91231_SPBA0_BASE_ADDR_VIRT) - -#define MXC91231_SPBA1_IO_ADDRESS(x) \ - (((x) - MXC91231_SPBA1_BASE_ADDR) + MXC91231_SPBA1_BASE_ADDR_VIRT) - -#define MXC91231_AIPS2_IO_ADDRESS(x) \ - (((x) - MXC91231_AIPS2_BASE_ADDR) + MXC91231_AIPS2_BASE_ADDR_VIRT) - -#define MXC91231_ROMP_IO_ADDRESS(x) \ - (((x) - MXC91231_ROMP_BASE_ADDR) + MXC91231_ROMP_BASE_ADDR_VIRT) - -#define MXC91231_AVIC_IO_ADDRESS(x) \ - (((x) - MXC91231_AVIC_BASE_ADDR) + MXC91231_AVIC_BASE_ADDR_VIRT) -#define MXC91231_X_MEMC_IO_ADDRESS(x) \ - (((x) - MXC91231_X_MEMC_BASE_ADDR) + MXC91231_X_MEMC_BASE_ADDR_VIRT) +#define MXC91231_IO_ADDRESS(x) ( \ + IMX_IO_ADDRESS(x, MXC91231_L2CC) ?: \ + IMX_IO_ADDRESS(x, MXC91231_X_MEMC) ?: \ + IMX_IO_ADDRESS(x, MXC91231_ROMP) ?: \ + IMX_IO_ADDRESS(x, MXC91231_AVIC) ?: \ + IMX_IO_ADDRESS(x, MXC91231_AIPS1) ?: \ + IMX_IO_ADDRESS(x, MXC91231_SPBA0) ?: \ + IMX_IO_ADDRESS(x, MXC91231_SPBA1) ?: \ + IMX_IO_ADDRESS(x, MXC91231_AIPS2)) /* * Interrupt numbers diff --git a/arch/arm/plat-mxc/include/mach/mxc_ehci.h b/arch/arm/plat-mxc/include/mach/mxc_ehci.h index 8f796239393..4b9b8368c0c 100644 --- a/arch/arm/plat-mxc/include/mach/mxc_ehci.h +++ b/arch/arm/plat-mxc/include/mach/mxc_ehci.h @@ -22,6 +22,10 @@ #define MXC_EHCI_POWER_PINS_ENABLED (1 << 5) #define MXC_EHCI_TTL_ENABLED (1 << 6) +#define MXC_EHCI_INTERNAL_PHY (1 << 7) +#define MXC_EHCI_IPPUE_DOWN (1 << 8) +#define MXC_EHCI_IPPUE_UP (1 << 9) + struct mxc_usbh_platform_data { int (*init)(struct platform_device *pdev); int (*exit)(struct platform_device *pdev); diff --git a/arch/arm/plat-mxc/include/mach/ssi.h b/arch/arm/plat-mxc/include/mach/ssi.h new file mode 100644 index 00000000000..c34ded523f1 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/ssi.h @@ -0,0 +1,18 @@ +#ifndef __MACH_SSI_H +#define __MACH_SSI_H + +struct snd_ac97; + +extern unsigned char imx_ssi_fiq_start, imx_ssi_fiq_end; +extern unsigned long imx_ssi_fiq_base, imx_ssi_fiq_tx_buffer, imx_ssi_fiq_rx_buffer; + +struct imx_ssi_platform_data { + unsigned int flags; +#define IMX_SSI_DMA (1 << 0) +#define IMX_SSI_USE_AC97 (1 << 1) + void (*ac97_reset) (struct snd_ac97 *ac97); + void (*ac97_warm_reset)(struct snd_ac97 *ac97); +}; + +#endif /* __MACH_SSI_H */ + diff --git a/arch/arm/plat-mxc/include/mach/timex.h b/arch/arm/plat-mxc/include/mach/timex.h index 527a6c24788..024416ed11c 100644 --- a/arch/arm/plat-mxc/include/mach/timex.h +++ b/arch/arm/plat-mxc/include/mach/timex.h @@ -28,6 +28,8 @@ #define CLOCK_TICK_RATE 16625000 #elif defined CONFIG_ARCH_MX25 #define CLOCK_TICK_RATE 16000000 +#elif defined CONFIG_ARCH_MX5 +#define CLOCK_TICK_RATE 8000000 #elif defined CONFIG_ARCH_MXC91231 #define CLOCK_TICK_RATE 13000000 #endif diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h index d49384cb1e9..52e476a150c 100644 --- a/arch/arm/plat-mxc/include/mach/uncompress.h +++ b/arch/arm/plat-mxc/include/mach/uncompress.h @@ -1,8 +1,6 @@ /* * arch/arm/plat-mxc/include/mach/uncompress.h * - * - * * Copyright (C) 1999 ARM Limited * Copyright (C) Shane Nay (shane@minirl.com) * @@ -25,7 +23,6 @@ #define __MXC_BOOT_UNCOMPRESS -#include <mach/hardware.h> #include <asm/mach-types.h> static unsigned long uart_base; diff --git a/arch/arm/plat-mxc/iomux-mx1-mx2.c b/arch/arm/plat-mxc/iomux-mx1-mx2.c deleted file mode 100644 index a37163ce280..00000000000 --- a/arch/arm/plat-mxc/iomux-mx1-mx2.c +++ /dev/null @@ -1,157 +0,0 @@ -/* - * arch/arm/mach-mxc/generic.c - * - * author: Sascha Hauer - * Created: april 20th, 2004 - * Copyright: Synertronixx GmbH - * - * Common code for i.MX machines - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/string.h> -#include <linux/gpio.h> - -#include <mach/hardware.h> -#include <asm/mach/map.h> -#include <mach/iomux.h> - -void mxc_gpio_mode(int gpio_mode) -{ - unsigned int pin = gpio_mode & GPIO_PIN_MASK; - unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT; - unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT; - unsigned int tmp; - - /* Pullup enable */ - tmp = __raw_readl(VA_GPIO_BASE + MXC_PUEN(port)); - if (gpio_mode & GPIO_PUEN) - tmp |= (1 << pin); - else - tmp &= ~(1 << pin); - __raw_writel(tmp, VA_GPIO_BASE + MXC_PUEN(port)); - - /* Data direction */ - tmp = __raw_readl(VA_GPIO_BASE + MXC_DDIR(port)); - if (gpio_mode & GPIO_OUT) - tmp |= 1 << pin; - else - tmp &= ~(1 << pin); - __raw_writel(tmp, VA_GPIO_BASE + MXC_DDIR(port)); - - /* Primary / alternate function */ - tmp = __raw_readl(VA_GPIO_BASE + MXC_GPR(port)); - if (gpio_mode & GPIO_AF) - tmp |= (1 << pin); - else - tmp &= ~(1 << pin); - __raw_writel(tmp, VA_GPIO_BASE + MXC_GPR(port)); - - /* use as gpio? */ - tmp = __raw_readl(VA_GPIO_BASE + MXC_GIUS(port)); - if (gpio_mode & (GPIO_PF | GPIO_AF)) - tmp &= ~(1 << pin); - else - tmp |= (1 << pin); - __raw_writel(tmp, VA_GPIO_BASE + MXC_GIUS(port)); - - if (pin < 16) { - tmp = __raw_readl(VA_GPIO_BASE + MXC_OCR1(port)); - tmp &= ~(3 << (pin * 2)); - tmp |= (ocr << (pin * 2)); - __raw_writel(tmp, VA_GPIO_BASE + MXC_OCR1(port)); - - tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFA1(port)); - tmp &= ~(3 << (pin * 2)); - tmp |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << (pin * 2); - __raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFA1(port)); - - tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFB1(port)); - tmp &= ~(3 << (pin * 2)); - tmp |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << (pin * 2); - __raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFB1(port)); - } else { - pin -= 16; - - tmp = __raw_readl(VA_GPIO_BASE + MXC_OCR2(port)); - tmp &= ~(3 << (pin * 2)); - tmp |= (ocr << (pin * 2)); - __raw_writel(tmp, VA_GPIO_BASE + MXC_OCR2(port)); - - tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFA2(port)); - tmp &= ~(3 << (pin * 2)); - tmp |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << (pin * 2); - __raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFA2(port)); - - tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFB2(port)); - tmp &= ~(3 << (pin * 2)); - tmp |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << (pin * 2); - __raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFB2(port)); - } -} -EXPORT_SYMBOL(mxc_gpio_mode); - -int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count, - const char *label) -{ - const int *p = pin_list; - int i; - unsigned gpio; - unsigned mode; - int ret = -EINVAL; - - for (i = 0; i < count; i++) { - gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK); - mode = *p & ~(GPIO_PIN_MASK | GPIO_PORT_MASK); - - if (gpio >= (GPIO_PORT_MAX + 1) * 32) - goto setup_error; - - ret = gpio_request(gpio, label); - if (ret) - goto setup_error; - - mxc_gpio_mode(gpio | mode); - - p++; - } - return 0; - -setup_error: - mxc_gpio_release_multiple_pins(pin_list, i); - return ret; -} -EXPORT_SYMBOL(mxc_gpio_setup_multiple_pins); - -void mxc_gpio_release_multiple_pins(const int *pin_list, int count) -{ - const int *p = pin_list; - int i; - - for (i = 0; i < count; i++) { - unsigned gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK); - gpio_free(gpio); - p++; - } - -} -EXPORT_SYMBOL(mxc_gpio_release_multiple_pins); - diff --git a/arch/arm/plat-mxc/iomux-v1.c b/arch/arm/plat-mxc/iomux-v1.c new file mode 100644 index 00000000000..960a02cbcba --- /dev/null +++ b/arch/arm/plat-mxc/iomux-v1.c @@ -0,0 +1,238 @@ +/* + * arch/arm/plat-mxc/iomux-v1.c + * + * Copyright (C) 2004 Sascha Hauer, Synertronixx GmbH + * Copyright (C) 2009 Uwe Kleine-Koenig, Pengutronix + * + * Common code for i.MX1, i.MX21 and i.MX27 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/string.h> +#include <linux/gpio.h> + +#include <mach/hardware.h> +#include <asm/mach/map.h> +#include <mach/iomux-v1.h> + +static void __iomem *imx_iomuxv1_baseaddr; +static unsigned imx_iomuxv1_numports; + +static inline unsigned long imx_iomuxv1_readl(unsigned offset) +{ + return __raw_readl(imx_iomuxv1_baseaddr + offset); +} + +static inline void imx_iomuxv1_writel(unsigned long val, unsigned offset) +{ + __raw_writel(val, imx_iomuxv1_baseaddr + offset); +} + +static inline void imx_iomuxv1_rmwl(unsigned offset, + unsigned long mask, unsigned long value) +{ + unsigned long reg = imx_iomuxv1_readl(offset); + + reg &= ~mask; + reg |= value; + + imx_iomuxv1_writel(reg, offset); +} + +static inline void imx_iomuxv1_set_puen( + unsigned int port, unsigned int pin, int on) +{ + unsigned long mask = 1 << pin; + + imx_iomuxv1_rmwl(MXC_PUEN(port), mask, on ? mask : 0); +} + +static inline void imx_iomuxv1_set_ddir( + unsigned int port, unsigned int pin, int out) +{ + unsigned long mask = 1 << pin; + + imx_iomuxv1_rmwl(MXC_DDIR(port), mask, out ? mask : 0); +} + +static inline void imx_iomuxv1_set_gpr( + unsigned int port, unsigned int pin, int af) +{ + unsigned long mask = 1 << pin; + + imx_iomuxv1_rmwl(MXC_GPR(port), mask, af ? mask : 0); +} + +static inline void imx_iomuxv1_set_gius( + unsigned int port, unsigned int pin, int inuse) +{ + unsigned long mask = 1 << pin; + + imx_iomuxv1_rmwl(MXC_GIUS(port), mask, inuse ? mask : 0); +} + +static inline void imx_iomuxv1_set_ocr( + unsigned int port, unsigned int pin, unsigned int ocr) +{ + unsigned long shift = (pin & 0xf) << 1; + unsigned long mask = 3 << shift; + unsigned long value = ocr << shift; + unsigned long offset = pin < 16 ? MXC_OCR1(port) : MXC_OCR2(port); + + imx_iomuxv1_rmwl(offset, mask, value); +} + +static inline void imx_iomuxv1_set_iconfa( + unsigned int port, unsigned int pin, unsigned int aout) +{ + unsigned long shift = (pin & 0xf) << 1; + unsigned long mask = 3 << shift; + unsigned long value = aout << shift; + unsigned long offset = pin < 16 ? MXC_ICONFA1(port) : MXC_ICONFA2(port); + + imx_iomuxv1_rmwl(offset, mask, value); +} + +static inline void imx_iomuxv1_set_iconfb( + unsigned int port, unsigned int pin, unsigned int bout) +{ + unsigned long shift = (pin & 0xf) << 1; + unsigned long mask = 3 << shift; + unsigned long value = bout << shift; + unsigned long offset = pin < 16 ? MXC_ICONFB1(port) : MXC_ICONFB2(port); + + imx_iomuxv1_rmwl(offset, mask, value); +} + +int mxc_gpio_mode(int gpio_mode) +{ + unsigned int pin = gpio_mode & GPIO_PIN_MASK; + unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT; + unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT; + unsigned int aout = (gpio_mode >> GPIO_AOUT_SHIFT) & 3; + unsigned int bout = (gpio_mode >> GPIO_BOUT_SHIFT) & 3; + + if (port >= imx_iomuxv1_numports) + return -EINVAL; + + /* Pullup enable */ + imx_iomuxv1_set_puen(port, pin, gpio_mode & GPIO_PUEN); + + /* Data direction */ + imx_iomuxv1_set_ddir(port, pin, gpio_mode & GPIO_OUT); + + /* Primary / alternate function */ + imx_iomuxv1_set_gpr(port, pin, gpio_mode & GPIO_AF); + + /* use as gpio? */ + imx_iomuxv1_set_gius(port, pin, !(gpio_mode & (GPIO_PF | GPIO_AF))); + + imx_iomuxv1_set_ocr(port, pin, ocr); + + imx_iomuxv1_set_iconfa(port, pin, aout); + + imx_iomuxv1_set_iconfb(port, pin, bout); + + return 0; +} +EXPORT_SYMBOL(mxc_gpio_mode); + +static int imx_iomuxv1_setup_multiple(const int *list, unsigned count) +{ + size_t i; + int ret; + + for (i = 0; i < count; ++i) { + ret = mxc_gpio_mode(list[i]); + + if (ret) + return ret; + } + + return ret; +} + +int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count, + const char *label) +{ + size_t i; + int ret; + + for (i = 0; i < count; ++i) { + unsigned gpio = pin_list[i] & (GPIO_PIN_MASK | GPIO_PORT_MASK); + + ret = gpio_request(gpio, label); + if (ret) + goto err_gpio_request; + } + + ret = imx_iomuxv1_setup_multiple(pin_list, count); + if (ret) + goto err_setup; + + return 0; + +err_setup: + BUG_ON(i != count); + +err_gpio_request: + mxc_gpio_release_multiple_pins(pin_list, i); + + return ret; +} +EXPORT_SYMBOL(mxc_gpio_setup_multiple_pins); + +void mxc_gpio_release_multiple_pins(const int *pin_list, int count) +{ + size_t i; + + for (i = 0; i < count; ++i) { + unsigned gpio = pin_list[i] & (GPIO_PIN_MASK | GPIO_PORT_MASK); + + gpio_free(gpio); + } +} +EXPORT_SYMBOL(mxc_gpio_release_multiple_pins); + +static int imx_iomuxv1_init(void) +{ +#ifdef CONFIG_ARCH_MX1 + if (cpu_is_mx1()) { + imx_iomuxv1_baseaddr = MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR); + imx_iomuxv1_numports = MX1_NUM_GPIO_PORT; + } else +#endif +#ifdef CONFIG_MACH_MX21 + if (cpu_is_mx21()) { + imx_iomuxv1_baseaddr = MX21_IO_ADDRESS(MX21_GPIO_BASE_ADDR); + imx_iomuxv1_numports = MX21_NUM_GPIO_PORT; + } else +#endif +#ifdef CONFIG_MACH_MX27 + if (cpu_is_mx27()) { + imx_iomuxv1_baseaddr = MX27_IO_ADDRESS(MX27_GPIO_BASE_ADDR); + imx_iomuxv1_numports = MX27_NUM_GPIO_PORT; + } else +#endif + return -ENODEV; + + return 0; +} +pure_initcall(imx_iomuxv1_init); diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c index 844567ee35f..c1ce51abdba 100644 --- a/arch/arm/plat-mxc/time.c +++ b/arch/arm/plat-mxc/time.c @@ -30,9 +30,15 @@ #include <asm/mach/time.h> #include <mach/common.h> +/* + * There are 2 versions of the timer hardware on Freescale MXC hardware. + * Version 1: MX1/MXL, MX21, MX27. + * Version 2: MX25, MX31, MX35, MX37, MX51 + */ + /* defines common for all i.MX */ #define MXC_TCTL 0x00 -#define MXC_TCTL_TEN (1 << 0) +#define MXC_TCTL_TEN (1 << 0) /* Enable module */ #define MXC_TPRER 0x04 /* MX1, MX21, MX27 */ @@ -47,8 +53,8 @@ #define MX2_TSTAT_CAPT (1 << 1) #define MX2_TSTAT_COMP (1 << 0) -/* MX31, MX35, MX25, MXC91231 */ -#define MX3_TCTL_WAITEN (1 << 3) +/* MX31, MX35, MX25, MXC91231, MX5 */ +#define MX3_TCTL_WAITEN (1 << 3) /* Wait enable mode */ #define MX3_TCTL_CLK_IPG (1 << 6) #define MX3_TCTL_FRR (1 << 9) #define MX3_IR 0x0c @@ -57,6 +63,9 @@ #define MX3_TCN 0x24 #define MX3_TCMP 0x10 +#define timer_is_v1() (cpu_is_mx1() || cpu_is_mx21() || cpu_is_mx27()) +#define timer_is_v2() (!timer_is_v1()) + static struct clock_event_device clockevent_mxc; static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED; @@ -66,7 +75,7 @@ static inline void gpt_irq_disable(void) { unsigned int tmp; - if (cpu_is_mx3() || cpu_is_mx25()) + if (timer_is_v2()) __raw_writel(0, timer_base + MX3_IR); else { tmp = __raw_readl(timer_base + MXC_TCTL); @@ -76,7 +85,7 @@ static inline void gpt_irq_disable(void) static inline void gpt_irq_enable(void) { - if (cpu_is_mx3() || cpu_is_mx25()) + if (timer_is_v2()) __raw_writel(1<<0, timer_base + MX3_IR); else { __raw_writel(__raw_readl(timer_base + MXC_TCTL) | MX1_2_TCTL_IRQEN, @@ -86,11 +95,13 @@ static inline void gpt_irq_enable(void) static void gpt_irq_acknowledge(void) { - if (cpu_is_mx1()) - __raw_writel(0, timer_base + MX1_2_TSTAT); - if (cpu_is_mx2()) - __raw_writel(MX2_TSTAT_CAPT | MX2_TSTAT_COMP, timer_base + MX1_2_TSTAT); - if (cpu_is_mx3() || cpu_is_mx25()) + if (timer_is_v1()) { + if (cpu_is_mx1()) + __raw_writel(0, timer_base + MX1_2_TSTAT); + else + __raw_writel(MX2_TSTAT_CAPT | MX2_TSTAT_COMP, + timer_base + MX1_2_TSTAT); + } else if (timer_is_v2()) __raw_writel(MX3_TSTAT_OF1, timer_base + MX3_TSTAT); } @@ -117,7 +128,7 @@ static int __init mxc_clocksource_init(struct clk *timer_clk) { unsigned int c = clk_get_rate(timer_clk); - if (cpu_is_mx3() || cpu_is_mx25()) + if (timer_is_v2()) clocksource_mxc.read = mx3_get_cycles; clocksource_mxc.mult = clocksource_hz2mult(c, @@ -180,7 +191,7 @@ static void mxc_set_mode(enum clock_event_mode mode, if (mode != clockevent_mode) { /* Set event time into far-far future */ - if (cpu_is_mx3() || cpu_is_mx25()) + if (timer_is_v2()) __raw_writel(__raw_readl(timer_base + MX3_TCN) - 3, timer_base + MX3_TCMP); else @@ -233,7 +244,7 @@ static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id) struct clock_event_device *evt = &clockevent_mxc; uint32_t tstat; - if (cpu_is_mx3() || cpu_is_mx25()) + if (timer_is_v2()) tstat = __raw_readl(timer_base + MX3_TSTAT); else tstat = __raw_readl(timer_base + MX1_2_TSTAT); @@ -264,7 +275,7 @@ static int __init mxc_clockevent_init(struct clk *timer_clk) { unsigned int c = clk_get_rate(timer_clk); - if (cpu_is_mx3() || cpu_is_mx25()) + if (timer_is_v2()) clockevent_mxc.set_next_event = mx3_set_next_event; clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC, @@ -296,7 +307,7 @@ void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq) __raw_writel(0, timer_base + MXC_TCTL); __raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */ - if (cpu_is_mx3() || cpu_is_mx25()) + if (timer_is_v2()) tctl_val = MX3_TCTL_CLK_IPG | MX3_TCTL_FRR | MX3_TCTL_WAITEN | MXC_TCTL_TEN; else tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN; diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c new file mode 100644 index 00000000000..afa6709db0b --- /dev/null +++ b/arch/arm/plat-mxc/tzic.c @@ -0,0 +1,172 @@ +/* + * Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/io.h> + +#include <asm/mach/irq.h> + +#include <mach/hardware.h> + +/* + ***************************************** + * TZIC Registers * + ***************************************** + */ + +#define TZIC_INTCNTL 0x0000 /* Control register */ +#define TZIC_INTTYPE 0x0004 /* Controller Type register */ +#define TZIC_IMPID 0x0008 /* Distributor Implementer Identification */ +#define TZIC_PRIOMASK 0x000C /* Priority Mask Reg */ +#define TZIC_SYNCCTRL 0x0010 /* Synchronizer Control register */ +#define TZIC_DSMINT 0x0014 /* DSM interrupt Holdoffregister */ +#define TZIC_INTSEC0(i) (0x0080 + ((i) << 2)) /* Interrupt Security Reg 0 */ +#define TZIC_ENSET0(i) (0x0100 + ((i) << 2)) /* Enable Set Reg 0 */ +#define TZIC_ENCLEAR0(i) (0x0180 + ((i) << 2)) /* Enable Clear Reg 0 */ +#define TZIC_SRCSET0 0x0200 /* Source Set Register 0 */ +#define TZIC_SRCCLAR0 0x0280 /* Source Clear Register 0 */ +#define TZIC_PRIORITY0 0x0400 /* Priority Register 0 */ +#define TZIC_PND0 0x0D00 /* Pending Register 0 */ +#define TZIC_HIPND0 0x0D80 /* High Priority Pending Register */ +#define TZIC_WAKEUP0(i) (0x0E00 + ((i) << 2)) /* Wakeup Config Register */ +#define TZIC_SWINT 0x0F00 /* Software Interrupt Rigger Register */ +#define TZIC_ID0 0x0FD0 /* Indentification Register 0 */ + +void __iomem *tzic_base; /* Used as irq controller base in entry-macro.S */ + +/** + * tzic_mask_irq() - Disable interrupt number "irq" in the TZIC + * + * @param irq interrupt source number + */ +static void tzic_mask_irq(unsigned int irq) +{ + int index, off; + + index = irq >> 5; + off = irq & 0x1F; + __raw_writel(1 << off, tzic_base + TZIC_ENCLEAR0(index)); +} + +/** + * tzic_unmask_irq() - Enable interrupt number "irq" in the TZIC + * + * @param irq interrupt source number + */ +static void tzic_unmask_irq(unsigned int irq) +{ + int index, off; + + index = irq >> 5; + off = irq & 0x1F; + __raw_writel(1 << off, tzic_base + TZIC_ENSET0(index)); +} + +static unsigned int wakeup_intr[4]; + +/** + * tzic_set_wake_irq() - Set interrupt number "irq" in the TZIC as a wake-up source. + * + * @param irq interrupt source number + * @param enable enable as wake-up if equal to non-zero + * disble as wake-up if equal to zero + * + * @return This function returns 0 on success. + */ +static int tzic_set_wake_irq(unsigned int irq, unsigned int enable) +{ + unsigned int index, off; + + index = irq >> 5; + off = irq & 0x1F; + + if (index > 3) + return -EINVAL; + + if (enable) + wakeup_intr[index] |= (1 << off); + else + wakeup_intr[index] &= ~(1 << off); + + return 0; +} + +static struct irq_chip mxc_tzic_chip = { + .name = "MXC_TZIC", + .ack = tzic_mask_irq, + .mask = tzic_mask_irq, + .unmask = tzic_unmask_irq, + .set_wake = tzic_set_wake_irq, +}; + +/* + * This function initializes the TZIC hardware and disables all the + * interrupts. It registers the interrupt enable and disable functions + * to the kernel for each interrupt source. + */ +void __init tzic_init_irq(void __iomem *irqbase) +{ + int i; + + tzic_base = irqbase; + /* put the TZIC into the reset value with + * all interrupts disabled + */ + i = __raw_readl(tzic_base + TZIC_INTCNTL); + + __raw_writel(0x80010001, tzic_base + TZIC_INTCNTL); + __raw_writel(0x1f, tzic_base + TZIC_PRIOMASK); + __raw_writel(0x02, tzic_base + TZIC_SYNCCTRL); + + for (i = 0; i < 4; i++) + __raw_writel(0xFFFFFFFF, tzic_base + TZIC_INTSEC0(i)); + + /* disable all interrupts */ + for (i = 0; i < 4; i++) + __raw_writel(0xFFFFFFFF, tzic_base + TZIC_ENCLEAR0(i)); + + /* all IRQ no FIQ Warning :: No selection */ + + for (i = 0; i < MXC_INTERNAL_IRQS; i++) { + set_irq_chip(i, &mxc_tzic_chip); + set_irq_handler(i, handle_level_irq); + set_irq_flags(i, IRQF_VALID); + } + + pr_info("TrustZone Interrupt Controller (TZIC) initialized\n"); +} + +/** + * tzic_enable_wake() - enable wakeup interrupt + * + * @param is_idle 1 if called in idle loop (ENSET0 register); + * 0 to be used when called from low power entry + * @return 0 if successful; non-zero otherwise + */ +int tzic_enable_wake(int is_idle) +{ + unsigned int i, v; + + __raw_writel(1, tzic_base + TZIC_DSMINT); + if (unlikely(__raw_readl(tzic_base + TZIC_DSMINT) == 0)) + return -EAGAIN; + + for (i = 0; i < 4; i++) { + v = is_idle ? __raw_readl(TZIC_ENSET0(i)) : wakeup_intr[i]; + __raw_writel(v, TZIC_WAKEUP0(i)); + } + + return 0; +} diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c index 62f18ad43a2..fa7cb3a57cb 100644 --- a/arch/arm/plat-nomadik/timer.c +++ b/arch/arm/plat-nomadik/timer.c @@ -49,24 +49,17 @@ static struct clocksource nmdk_clksrc = { static void nmdk_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev) { - unsigned long flags; - switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - /* enable interrupts -- and count current value? */ - raw_local_irq_save(flags); + /* count current value? */ writel(readl(mtu_base + MTU_IMSC) | 1, mtu_base + MTU_IMSC); - raw_local_irq_restore(flags); break; case CLOCK_EVT_MODE_ONESHOT: BUG(); /* Not supported, yet */ /* FALLTHROUGH */ case CLOCK_EVT_MODE_SHUTDOWN: case CLOCK_EVT_MODE_UNUSED: - /* disable irq */ - raw_local_irq_save(flags); writel(readl(mtu_base + MTU_IMSC) & ~1, mtu_base + MTU_IMSC); - raw_local_irq_restore(flags); break; case CLOCK_EVT_MODE_RESUME: break; diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig deleted file mode 100644 index 9e9d0286e48..00000000000 --- a/arch/arm/plat-s3c/Kconfig +++ /dev/null @@ -1,215 +0,0 @@ -# Copyright 2007 Simtec Electronics -# -# Licensed under GPLv2 - -config PLAT_S3C - bool - depends on ARCH_S3C2410 || ARCH_S3C24A0 || ARCH_S3C64XX - default y - select NO_IOPORT - help - Base platform code for any Samsung S3C device - -# low-level serial option nodes - -if PLAT_S3C - -config CPU_LLSERIAL_S3C2410_ONLY - bool - default y if CPU_LLSERIAL_S3C2410 && !CPU_LLSERIAL_S3C2440 - -config CPU_LLSERIAL_S3C2440_ONLY - bool - default y if CPU_LLSERIAL_S3C2440 && !CPU_LLSERIAL_S3C2410 - -config CPU_LLSERIAL_S3C2410 - bool - help - Selected if there is an S3C2410 (or register compatible) serial - low-level implementation needed - -config CPU_LLSERIAL_S3C2440 - bool - help - Selected if there is an S3C2440 (or register compatible) serial - low-level implementation needed - -# boot configurations - -comment "Boot options" - -config S3C_BOOT_WATCHDOG - bool "S3C Initialisation watchdog" - depends on S3C2410_WATCHDOG - help - Say y to enable the watchdog during the kernel decompression - stage. If the kernel fails to uncompress, then the watchdog - will trigger a reset and the system should restart. - -config S3C_BOOT_ERROR_RESET - bool "S3C Reboot on decompression error" - help - Say y here to use the watchdog to reset the system if the - kernel decompressor detects an error during decompression. - -config S3C_BOOT_UART_FORCE_FIFO - bool "Force UART FIFO on during boot process" - default y - help - Say Y here to force the UART FIFOs on during the kernel - uncompressor - -comment "Power management" - -config S3C2410_PM_DEBUG - bool "S3C2410 PM Suspend debug" - depends on PM - help - Say Y here if you want verbose debugging from the PM Suspend and - Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt> - for more information. - -config S3C_PM_DEBUG_LED_SMDK - bool "SMDK LED suspend/resume debugging" - depends on PM && (MACH_SMDK6410) - help - Say Y here to enable the use of the SMDK LEDs on the baseboard - for debugging of the state of the suspend and resume process. - - Note, this currently only works for S3C64XX based SMDK boards. - -config S3C2410_PM_CHECK - bool "S3C2410 PM Suspend Memory CRC" - depends on PM && CRC32 - help - Enable the PM code's memory area checksum over sleep. This option - will generate CRCs of all blocks of memory, and store them before - going to sleep. The blocks are then checked on resume for any - errors. - - Note, this can take several seconds depending on memory size - and CPU speed. - - See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt> - -config S3C2410_PM_CHECK_CHUNKSIZE - int "S3C2410 PM Suspend CRC Chunksize (KiB)" - depends on PM && S3C2410_PM_CHECK - default 64 - help - Set the chunksize in Kilobytes of the CRC for checking memory - corruption over suspend and resume. A smaller value will mean that - the CRC data block will take more memory, but wil identify any - faults with better precision. - - See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt> - -config S3C_LOWLEVEL_UART_PORT - int "S3C UART to use for low-level messages" - default 0 - help - Choice of which UART port to use for the low-level messages, - such as the `Uncompressing...` at start time. The value of - this configuration should be between zero and two. The port - must have been initialised by the boot-loader before use. - -# options for gpiolib support - -config S3C_GPIO_SPACE - int "Space between gpio banks" - default 0 - help - Add a number of spare GPIO entries between each bank for debugging - purposes. This allows any problems where an counter overflows from - one bank to another to be caught, at the expense of using a little - more memory. - -config S3C_GPIO_TRACK - bool - help - Internal configuration option to enable the s3c specific gpio - chip tracking if the platform requires it. - -config S3C_GPIO_PULL_UPDOWN - bool - help - Internal configuration to enable the correct GPIO pull helper - -config S3C_GPIO_PULL_DOWN - bool - help - Internal configuration to enable the correct GPIO pull helper - -config S3C_GPIO_PULL_UP - bool - help - Internal configuration to enable the correct GPIO pull helper - -config S3C_GPIO_CFG_S3C24XX - bool - help - Internal configuration to enable S3C24XX style GPIO configuration - functions. - -config S3C_GPIO_CFG_S3C64XX - bool - help - Internal configuration to enable S3C64XX style GPIO configuration - functions. - -config S5P_GPIO_CFG_S5PC1XX - bool - help - Internal configuration to enable S5PC1XX style GPIO configuration - functions. - -# DMA - -config S3C_DMA - bool - help - Internal configuration for S3C DMA core - -# device definitions to compile in - -config S3C_DEV_HSMMC - bool - help - Compile in platform device definitions for HSMMC code - -config S3C_DEV_HSMMC1 - bool - help - Compile in platform device definitions for HSMMC channel 1 - -config S3C_DEV_HSMMC2 - bool - help - Compile in platform device definitions for HSMMC channel 2 - -config S3C_DEV_I2C1 - bool - help - Compile in platform device definitions for I2C channel 1 - -config S3C_DEV_FB - bool - help - Compile in platform device definition for framebuffer - -config S3C_DEV_USB_HOST - bool - help - Compile in platform device definition for USB host. - -config S3C_DEV_USB_HSOTG - bool - help - Compile in platform device definition for USB high-speed OtG - -config S3C_DEV_NAND - bool - help - Compile in platform device definition for NAND controller - -endif diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile deleted file mode 100644 index 50444da9842..00000000000 --- a/arch/arm/plat-s3c/Makefile +++ /dev/null @@ -1,45 +0,0 @@ -# arch/arm/plat-s3c/Makefile -# -# Copyright 2008 Simtec Electronics -# -# Licensed under GPLv2 - -obj-y := -obj-m := -obj-n := -obj- := - -# Core support for all Samsung SoCs - -obj-y += init.o -obj-y += time.o -obj-y += clock.o -obj-y += pwm-clock.o -obj-y += gpio.o -obj-y += gpio-config.o - -# DMA support - -obj-$(CONFIG_S3C_DMA) += dma.o - -# PM support - -obj-$(CONFIG_PM) += pm.o -obj-$(CONFIG_PM) += pm-gpio.o -obj-$(CONFIG_S3C2410_PM_CHECK) += pm-check.o - -# PWM support - -obj-$(CONFIG_HAVE_PWM) += pwm.o - -# devices - -obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o -obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o -obj-$(CONFIG_S3C_DEV_HSMMC2) += dev-hsmmc2.o -obj-y += dev-i2c0.o -obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o -obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o -obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o -obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o -obj-$(CONFIG_S3C_DEV_NAND) += dev-nand.o diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index 342647eb91d..6e93ef8f3d4 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -14,58 +14,40 @@ config PLAT_S3C24XX if PLAT_S3C24XX -# code that is shared between a number of the s3c24xx implementations +# low-level serial option nodes -config S3C2410_CLOCK +config CPU_LLSERIAL_S3C2410_ONLY bool - help - Clock code for the S3C2410, and similar processors which - is currently includes the S3C2410, S3C2440, S3C2442. + default y if CPU_LLSERIAL_S3C2410 && !CPU_LLSERIAL_S3C2440 -config S3C24XX_DCLK +config CPU_LLSERIAL_S3C2440_ONLY bool - help - Clock code for supporting DCLK/CLKOUT on S3C24XX architectures + default y if CPU_LLSERIAL_S3C2440 && !CPU_LLSERIAL_S3C2410 -config CPU_S3C244X +config CPU_LLSERIAL_S3C2410 bool - depends on ARCH_S3C2410 && (CPU_S3C2440 || CPU_S3C2442) - help - Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems. - -config S3C2440_CPUFREQ - bool "S3C2440/S3C2442 CPU Frequency scaling support" - depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442) - select S3C2410_CPUFREQ_UTILS - default y help - CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs. + Selected if there is an S3C2410 (or register compatible) serial + low-level implementation needed -config S3C2440_XTAL_12000000 +config CPU_LLSERIAL_S3C2440 bool help - Indicate that the build needs to support 12MHz system - crystal. + Selected if there is an S3C2440 (or register compatible) serial + low-level implementation needed -config S3C2440_XTAL_16934400 - bool - help - Indicate that the build needs to support 16.9344MHz system - crystal. +# code that is shared between a number of the s3c24xx implementations -config S3C2440_PLL_12000000 +config S3C2410_CLOCK bool - depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000 - default y if CPU_FREQ_S3C24XX_PLL help - PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals. + Clock code for the S3C2410, and similar processors which + is currently includes the S3C2410, S3C2440, S3C2442. -config S3C2440_PLL_16934400 +config S3C24XX_DCLK bool - depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400 - default y if CPU_FREQ_S3C24XX_PLL help - PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals. + Clock code for supporting DCLK/CLKOUT on S3C24XX architectures config S3C24XX_PWM bool "PWM device support" @@ -74,7 +56,6 @@ config S3C24XX_PWM Support for exporting the PWM timer blocks via the pwm device system. - # gpio configurations config S3C24XX_GPIO_EXTRA @@ -117,13 +98,6 @@ config S3C2410_DMA_DEBUG Enable debugging output for the DMA code. This option sends info to the kernel log, at priority KERN_DEBUG. -config S3C24XX_ADC - bool "ADC common driver support" - help - Core support for the ADC block found in the S3C24XX SoC systems - for drivers such as the touchscreen and hwmon to use to share - this resource. - # SPI default pin configuration code config S3C24XX_SPI_BUS0_GPE11_GPE12_GPE13 diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile index 5dee8c12e8b..c2237c41141 100644 --- a/arch/arm/plat-s3c24xx/Makefile +++ b/arch/arm/plat-s3c24xx/Makefile @@ -25,20 +25,12 @@ obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpu-freq-debugfs.o # Architecture dependant builds -obj-$(CONFIG_CPU_S3C244X) += s3c244x.o -obj-$(CONFIG_CPU_S3C244X) += s3c244x-irq.o -obj-$(CONFIG_CPU_S3C244X) += s3c244x-clock.o -obj-$(CONFIG_S3C2440_CPUFREQ) += s3c2440-cpufreq.o -obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o -obj-$(CONFIG_S3C2440_PLL_16934400) += s3c2440-pll-16934400.o - obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_PM) += irq-pm.o obj-$(CONFIG_PM) += sleep.o obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o obj-$(CONFIG_S3C2410_DMA) += dma.o -obj-$(CONFIG_S3C24XX_ADC) += adc.o obj-$(CONFIG_S3C2410_IOTIMING) += s3c2410-iotiming.o obj-$(CONFIG_S3C2412_IOTIMING) += s3c2412-iotiming.o obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += s3c2410-cpufreq-utils.o diff --git a/arch/arm/plat-s3c24xx/clock-dclk.c b/arch/arm/plat-s3c24xx/clock-dclk.c index ac061a1bcb3..cf97caafe56 100644 --- a/arch/arm/plat-s3c24xx/clock-dclk.c +++ b/arch/arm/plat-s3c24xx/clock-dclk.c @@ -161,14 +161,18 @@ static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent) /* external clock definitions */ +static struct clk_ops dclk_ops = { + .set_parent = s3c24xx_dclk_setparent, + .set_rate = s3c24xx_set_dclk_rate, + .round_rate = s3c24xx_round_dclk_rate, +}; + struct clk s3c24xx_dclk0 = { .name = "dclk0", .id = -1, .ctrlbit = S3C2410_DCLKCON_DCLK0EN, .enable = s3c24xx_dclk_enable, - .set_parent = s3c24xx_dclk_setparent, - .set_rate = s3c24xx_set_dclk_rate, - .round_rate = s3c24xx_round_dclk_rate, + .ops = &dclk_ops, }; struct clk s3c24xx_dclk1 = { @@ -176,19 +180,21 @@ struct clk s3c24xx_dclk1 = { .id = -1, .ctrlbit = S3C2410_DCLKCON_DCLK1EN, .enable = s3c24xx_dclk_enable, - .set_parent = s3c24xx_dclk_setparent, - .set_rate = s3c24xx_set_dclk_rate, - .round_rate = s3c24xx_round_dclk_rate, + .ops = &dclk_ops, +}; + +static struct clk_ops clkout_ops = { + .set_parent = s3c24xx_clkout_setparent, }; struct clk s3c24xx_clkout0 = { .name = "clkout0", .id = -1, - .set_parent = s3c24xx_clkout_setparent, + .ops = &clkout_ops, }; struct clk s3c24xx_clkout1 = { .name = "clkout1", .id = -1, - .set_parent = s3c24xx_clkout_setparent, + .ops = &clkout_ops, }; diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c index 4af9dd94879..9ca64df35bf 100644 --- a/arch/arm/plat-s3c24xx/cpu.c +++ b/arch/arm/plat-s3c24xx/cpu.c @@ -49,9 +49,7 @@ #include <plat/s3c2400.h> #include <plat/s3c2410.h> #include <plat/s3c2412.h> -#include "s3c244x.h" -#include <plat/s3c2440.h> -#include <plat/s3c2442.h> +#include <plat/s3c244x.h> #include <plat/s3c2443.h> /* table of supported CPUs */ diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c index 7f686a31e67..8c6de1c9968 100644 --- a/arch/arm/plat-s3c24xx/devs.c +++ b/arch/arm/plat-s3c24xx/devs.c @@ -32,6 +32,7 @@ #include <plat/regs-serial.h> #include <plat/udc.h> +#include <plat/mci.h> #include <plat/devs.h> #include <plat/cpu.h> @@ -112,34 +113,6 @@ struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = { }, }; -/* yart devices */ - -static struct platform_device s3c24xx_uart_device0 = { - .id = 0, -}; - -static struct platform_device s3c24xx_uart_device1 = { - .id = 1, -}; - -static struct platform_device s3c24xx_uart_device2 = { - .id = 2, -}; - -static struct platform_device s3c24xx_uart_device3 = { - .id = 3, -}; - -struct platform_device *s3c24xx_uart_src[4] = { - &s3c24xx_uart_device0, - &s3c24xx_uart_device1, - &s3c24xx_uart_device2, - &s3c24xx_uart_device3, -}; - -struct platform_device *s3c24xx_uart_devs[4] = { -}; - /* LCD Controller */ static struct resource s3c_lcd_resource[] = { @@ -185,9 +158,27 @@ void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd) } /* Touchscreen */ + +static struct resource s3c_ts_resource[] = { + [0] = { + .start = S3C24XX_PA_ADC, + .end = S3C24XX_PA_ADC + S3C24XX_SZ_ADC - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_TC, + .end = IRQ_TC, + .flags = IORESOURCE_IRQ, + }, + +}; + struct platform_device s3c_device_ts = { .name = "s3c2410-ts", .id = -1, + .dev.parent = &s3c_device_adc.dev, + .num_resources = ARRAY_SIZE(s3c_ts_resource), + .resource = s3c_ts_resource, }; EXPORT_SYMBOL(s3c_device_ts); @@ -379,6 +370,18 @@ struct platform_device s3c_device_sdi = { EXPORT_SYMBOL(s3c_device_sdi); +void s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata) +{ + struct s3c24xx_mci_pdata *npd; + + npd = kmemdup(pdata, sizeof(struct s3c24xx_mci_pdata), GFP_KERNEL); + if (!npd) + printk(KERN_ERR "%s: no memory to copy pdata", __func__); + + s3c_device_sdi.dev.platform_data = npd; +} + + /* SPI (0) */ static struct resource s3c_spi0_resource[] = { diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index f0ea7943ac5..93827b3d4e8 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -33,7 +33,7 @@ #include <mach/dma.h> #include <mach/map.h> -#include <plat/dma-plat.h> +#include <plat/dma-s3c24xx.h> #include <plat/regs-dma.h> /* io map for dma */ diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c index 6d7a961d326..4f0f11a6a67 100644 --- a/arch/arm/plat-s3c24xx/gpiolib.c +++ b/arch/arm/plat-s3c24xx/gpiolib.c @@ -20,7 +20,7 @@ #include <linux/io.h> #include <linux/gpio.h> -#include <mach/gpio-core.h> +#include <plat/gpio-core.h> #include <mach/hardware.h> #include <asm/irq.h> #include <plat/pm.h> diff --git a/arch/arm/plat-s3c/include/plat/audio-simtec.h b/arch/arm/plat-s3c24xx/include/plat/audio-simtec.h index 53a93656d5d..de5e88fdcb3 100644 --- a/arch/arm/plat-s3c/include/plat/audio-simtec.h +++ b/arch/arm/plat-s3c24xx/include/plat/audio-simtec.h @@ -1,4 +1,4 @@ -/* arch/arm/plat-s3c/include/plat/audio-simtec.h +/* arch/arm/plat-s3c24xx/include/plat/audio-simtec.h * * Copyright 2008 Simtec Electronics * http://armlinux.simtec.co.uk/ diff --git a/arch/arm/plat-s3c24xx/include/plat/mci.h b/arch/arm/plat-s3c24xx/include/plat/mci.h index 36aaa10fad0..2ac2b21ec49 100644 --- a/arch/arm/plat-s3c24xx/include/plat/mci.h +++ b/arch/arm/plat-s3c24xx/include/plat/mci.h @@ -40,4 +40,13 @@ struct s3c24xx_mci_pdata { unsigned short vdd); }; +/** + * s3c24xx_mci_set_platdata - set platform data for mmc/sdi device + * @pdata: The platform data + * + * Copy the platform data supplied by @pdata so that this can be marked + * __initdata. + */ +extern void s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata); + #endif /* _ARCH_NCI_H */ diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2440.h b/arch/arm/plat-s3c24xx/include/plat/s3c2440.h deleted file mode 100644 index 107853bf948..00000000000 --- a/arch/arm/plat-s3c24xx/include/plat/s3c2440.h +++ /dev/null @@ -1,17 +0,0 @@ -/* linux/include/asm-arm/plat-s3c24xx/s3c2440.h - * - * Copyright (c) 2004-2005 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Header file for s3c2440 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifdef CONFIG_CPU_S3C2440 -extern int s3c2440_init(void); -#else -#define s3c2440_init NULL -#endif diff --git a/arch/arm/plat-s3c24xx/s3c244x.h b/arch/arm/plat-s3c24xx/include/plat/s3c244x.h index 6aab5eaae2b..307248d1ccb 100644 --- a/arch/arm/plat-s3c24xx/s3c244x.h +++ b/arch/arm/plat-s3c24xx/include/plat/s3c244x.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s3c24xx/s3c244x.h +/* linux/arch/arm/plat-s3c24xx/include/plat/s3c244x.h * * Copyright (c) 2004-2005 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> @@ -23,3 +23,15 @@ extern void s3c244x_init_clocks(int xtal); #define s3c244x_init_uarts NULL #define s3c244x_map_io NULL #endif + +#ifdef CONFIG_CPU_S3C2440 +extern int s3c2440_init(void); +#else +#define s3c2440_init NULL +#endif + +#ifdef CONFIG_CPU_S3C2442 +extern int s3c2442_init(void); +#else +#define s3c2442_init NULL +#endif diff --git a/arch/arm/plat-s3c64xx/Kconfig b/arch/arm/plat-s3c64xx/Kconfig deleted file mode 100644 index e6da87a5885..00000000000 --- a/arch/arm/plat-s3c64xx/Kconfig +++ /dev/null @@ -1,71 +0,0 @@ -# Copyright 2008 Openmoko, Inc. -# Copyright 2008 Simtec Electronics -# Ben Dooks <ben@simtec.co.uk> -# -# Licensed under GPLv2 - -config PLAT_S3C64XX - bool - depends on ARCH_S3C64XX - default y - select CPU_V6 - select PLAT_S3C - select ARM_VIC - select NO_IOPORT - select ARCH_REQUIRE_GPIOLIB - select S3C_GPIO_TRACK - select S3C_GPIO_PULL_UPDOWN - select S3C_GPIO_CFG_S3C24XX - select S3C_GPIO_CFG_S3C64XX - select S3C_DEV_NAND - select USB_ARCH_HAS_OHCI - help - Base platform code for any Samsung S3C64XX device - -if PLAT_S3C64XX - -# Configuration options shared by all S3C64XX implementations - -config CPU_S3C6400_INIT - bool - help - Common initialisation code for the S3C6400 that is shared - by other CPUs in the series, such as the S3C6410. - -config CPU_S3C6400_CLOCK - bool - help - Common clock support code for the S3C6400 that is shared - by other CPUs in the series, such as the S3C6410. - -config S3C64XX_DMA - bool "S3C64XX DMA" - select S3C_DMA - -# platform specific device setup - -config S3C64XX_SETUP_I2C0 - bool - default y - help - Common setup code for i2c bus 0. - - Note, currently since i2c0 is always compiled, this setup helper - is always compiled with it. - -config S3C64XX_SETUP_I2C1 - bool - help - Common setup code for i2c bus 1. - -config S3C64XX_SETUP_FB_24BPP - bool - help - Common setup code for S3C64XX with an 24bpp RGB display helper. - -config S3C64XX_SETUP_SDHCI_GPIO - bool - help - Common setup code for S3C64XX SDHCI GPIO configurations - -endif diff --git a/arch/arm/plat-s3c64xx/clock.c b/arch/arm/plat-s3c64xx/clock.c deleted file mode 100644 index 7a36e899360..00000000000 --- a/arch/arm/plat-s3c64xx/clock.c +++ /dev/null @@ -1,300 +0,0 @@ -/* linux/arch/arm/plat-s3c64xx/clock.c - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C64XX Base clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <mach/map.h> - -#include <plat/regs-sys.h> -#include <plat/regs-clock.h> -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/clock.h> - -struct clk clk_h2 = { - .name = "hclk2", - .id = -1, - .rate = 0, -}; - -struct clk clk_27m = { - .name = "clk_27m", - .id = -1, - .rate = 27000000, -}; - -static int clk_48m_ctrl(struct clk *clk, int enable) -{ - unsigned long flags; - u32 val; - - /* can't rely on clock lock, this register has other usages */ - local_irq_save(flags); - - val = __raw_readl(S3C64XX_OTHERS); - if (enable) - val |= S3C64XX_OTHERS_USBMASK; - else - val &= ~S3C64XX_OTHERS_USBMASK; - - __raw_writel(val, S3C64XX_OTHERS); - local_irq_restore(flags); - - return 0; -} - -struct clk clk_48m = { - .name = "clk_48m", - .id = -1, - .rate = 48000000, - .enable = clk_48m_ctrl, -}; - -static int inline s3c64xx_gate(void __iomem *reg, - struct clk *clk, - int enable) -{ - unsigned int ctrlbit = clk->ctrlbit; - u32 con; - - con = __raw_readl(reg); - - if (enable) - con |= ctrlbit; - else - con &= ~ctrlbit; - - __raw_writel(con, reg); - return 0; -} - -static int s3c64xx_pclk_ctrl(struct clk *clk, int enable) -{ - return s3c64xx_gate(S3C_PCLK_GATE, clk, enable); -} - -static int s3c64xx_hclk_ctrl(struct clk *clk, int enable) -{ - return s3c64xx_gate(S3C_HCLK_GATE, clk, enable); -} - -int s3c64xx_sclk_ctrl(struct clk *clk, int enable) -{ - return s3c64xx_gate(S3C_SCLK_GATE, clk, enable); -} - -static struct clk init_clocks_disable[] = { - { - .name = "nand", - .id = -1, - .parent = &clk_h, - }, { - .name = "adc", - .id = -1, - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_TSADC, - }, { - .name = "i2c", - .id = -1, - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_IIC, - }, { - .name = "iis", - .id = 0, - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_IIS0, - }, { - .name = "iis", - .id = 1, - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_IIS1, - }, { - .name = "spi", - .id = 0, - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_SPI0, - }, { - .name = "spi", - .id = 1, - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_SPI1, - }, { - .name = "48m", - .id = 0, - .parent = &clk_48m, - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_MMC0_48, - }, { - .name = "48m", - .id = 1, - .parent = &clk_48m, - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_MMC1_48, - }, { - .name = "48m", - .id = 2, - .parent = &clk_48m, - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_MMC2_48, - }, { - .name = "dma0", - .id = -1, - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_DMA0, - }, { - .name = "dma1", - .id = -1, - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_DMA1, - }, -}; - -static struct clk init_clocks[] = { - { - .name = "lcd", - .id = -1, - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_LCD, - }, { - .name = "gpio", - .id = -1, - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_GPIO, - }, { - .name = "usb-host", - .id = -1, - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_UHOST, - }, { - .name = "hsmmc", - .id = 0, - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_HSMMC0, - }, { - .name = "hsmmc", - .id = 1, - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_HSMMC1, - }, { - .name = "hsmmc", - .id = 2, - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_HSMMC2, - }, { - .name = "timers", - .id = -1, - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_PWM, - }, { - .name = "uart", - .id = 0, - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_UART0, - }, { - .name = "uart", - .id = 1, - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_UART1, - }, { - .name = "uart", - .id = 2, - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_UART2, - }, { - .name = "uart", - .id = 3, - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_UART3, - }, { - .name = "rtc", - .id = -1, - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_RTC, - }, { - .name = "watchdog", - .id = -1, - .parent = &clk_p, - .ctrlbit = S3C_CLKCON_PCLK_WDT, - }, { - .name = "ac97", - .id = -1, - .parent = &clk_p, - .ctrlbit = S3C_CLKCON_PCLK_AC97, - } -}; - -static struct clk *clks[] __initdata = { - &clk_ext, - &clk_epll, - &clk_27m, - &clk_48m, - &clk_h2, -}; - -void __init s3c64xx_register_clocks(void) -{ - struct clk *clkp; - int ret; - int ptr; - - s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); - - clkp = init_clocks; - for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) { - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - } - - clkp = init_clocks_disable; - for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) { - - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - - (clkp->enable)(clkp, 0); - } - - s3c_pwmclk_init(); -} diff --git a/arch/arm/plat-s3c64xx/dev-audio.c b/arch/arm/plat-s3c64xx/dev-audio.c deleted file mode 100644 index a21a88fbb7e..00000000000 --- a/arch/arm/plat-s3c64xx/dev-audio.c +++ /dev/null @@ -1,167 +0,0 @@ -/* linux/arch/arm/plat-s3c/dev-audio.c - * - * Copyright 2009 Wolfson Microelectronics - * Mark Brown <broonie@opensource.wolfsonmicro.com> - * - - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/platform_device.h> - -#include <mach/irqs.h> -#include <mach/map.h> -#include <mach/dma.h> -#include <mach/gpio.h> - -#include <plat/devs.h> -#include <plat/audio.h> -#include <plat/gpio-bank-d.h> -#include <plat/gpio-bank-e.h> -#include <plat/gpio-cfg.h> - -static struct resource s3c64xx_iis0_resource[] = { - [0] = { - .start = S3C64XX_PA_IIS0, - .end = S3C64XX_PA_IIS0 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, -}; - -struct platform_device s3c64xx_device_iis0 = { - .name = "s3c64xx-iis", - .id = 0, - .num_resources = ARRAY_SIZE(s3c64xx_iis0_resource), - .resource = s3c64xx_iis0_resource, -}; -EXPORT_SYMBOL(s3c64xx_device_iis0); - -static struct resource s3c64xx_iis1_resource[] = { - [0] = { - .start = S3C64XX_PA_IIS1, - .end = S3C64XX_PA_IIS1 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, -}; - -struct platform_device s3c64xx_device_iis1 = { - .name = "s3c64xx-iis", - .id = 1, - .num_resources = ARRAY_SIZE(s3c64xx_iis1_resource), - .resource = s3c64xx_iis1_resource, -}; -EXPORT_SYMBOL(s3c64xx_device_iis1); - -static struct resource s3c64xx_iisv4_resource[] = { - [0] = { - .start = S3C64XX_PA_IISV4, - .end = S3C64XX_PA_IISV4 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, -}; - -struct platform_device s3c64xx_device_iisv4 = { - .name = "s3c64xx-iis-v4", - .id = -1, - .num_resources = ARRAY_SIZE(s3c64xx_iisv4_resource), - .resource = s3c64xx_iisv4_resource, -}; -EXPORT_SYMBOL(s3c64xx_device_iisv4); - - -/* PCM Controller platform_devices */ - -static int s3c64xx_pcm_cfg_gpio(struct platform_device *pdev) -{ - switch (pdev->id) { - case 0: - s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_PCM0_SCLK); - s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_PCM0_EXTCLK); - s3c_gpio_cfgpin(S3C64XX_GPD(2), S3C64XX_GPD2_PCM0_FSYNC); - s3c_gpio_cfgpin(S3C64XX_GPD(3), S3C64XX_GPD3_PCM0_SIN); - s3c_gpio_cfgpin(S3C64XX_GPD(4), S3C64XX_GPD4_PCM0_SOUT); - break; - case 1: - s3c_gpio_cfgpin(S3C64XX_GPE(0), S3C64XX_GPE0_PCM1_SCLK); - s3c_gpio_cfgpin(S3C64XX_GPE(1), S3C64XX_GPE1_PCM1_EXTCLK); - s3c_gpio_cfgpin(S3C64XX_GPE(2), S3C64XX_GPE2_PCM1_FSYNC); - s3c_gpio_cfgpin(S3C64XX_GPE(3), S3C64XX_GPE3_PCM1_SIN); - s3c_gpio_cfgpin(S3C64XX_GPE(4), S3C64XX_GPE4_PCM1_SOUT); - break; - default: - printk(KERN_DEBUG "Invalid PCM Controller number!"); - return -EINVAL; - } - - return 0; -} - -static struct resource s3c64xx_pcm0_resource[] = { - [0] = { - .start = S3C64XX_PA_PCM0, - .end = S3C64XX_PA_PCM0 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_PCM0_TX, - .end = DMACH_PCM0_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_PCM0_RX, - .end = DMACH_PCM0_RX, - .flags = IORESOURCE_DMA, - }, -}; - -static struct s3c_audio_pdata s3c_pcm0_pdata = { - .cfg_gpio = s3c64xx_pcm_cfg_gpio, -}; - -struct platform_device s3c64xx_device_pcm0 = { - .name = "samsung-pcm", - .id = 0, - .num_resources = ARRAY_SIZE(s3c64xx_pcm0_resource), - .resource = s3c64xx_pcm0_resource, - .dev = { - .platform_data = &s3c_pcm0_pdata, - }, -}; -EXPORT_SYMBOL(s3c64xx_device_pcm0); - -static struct resource s3c64xx_pcm1_resource[] = { - [0] = { - .start = S3C64XX_PA_PCM1, - .end = S3C64XX_PA_PCM1 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_PCM1_TX, - .end = DMACH_PCM1_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_PCM1_RX, - .end = DMACH_PCM1_RX, - .flags = IORESOURCE_DMA, - }, -}; - -static struct s3c_audio_pdata s3c_pcm1_pdata = { - .cfg_gpio = s3c64xx_pcm_cfg_gpio, -}; - -struct platform_device s3c64xx_device_pcm1 = { - .name = "samsung-pcm", - .id = 1, - .num_resources = ARRAY_SIZE(s3c64xx_pcm1_resource), - .resource = s3c64xx_pcm1_resource, - .dev = { - .platform_data = &s3c_pcm1_pdata, - }, -}; -EXPORT_SYMBOL(s3c64xx_device_pcm1); diff --git a/arch/arm/plat-s3c64xx/irq.c b/arch/arm/plat-s3c64xx/irq.c deleted file mode 100644 index 8dc5b6da978..00000000000 --- a/arch/arm/plat-s3c64xx/irq.c +++ /dev/null @@ -1,256 +0,0 @@ -/* arch/arm/plat-s3c64xx/irq.c - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C64XX - Interrupt handling - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/serial_core.h> -#include <linux/irq.h> -#include <linux/io.h> - -#include <asm/hardware/vic.h> - -#include <mach/map.h> -#include <plat/regs-serial.h> -#include <plat/regs-timer.h> -#include <plat/cpu.h> - -/* Timer interrupt handling */ - -static void s3c_irq_demux_timer(unsigned int base_irq, unsigned int sub_irq) -{ - generic_handle_irq(sub_irq); -} - -static void s3c_irq_demux_timer0(unsigned int irq, struct irq_desc *desc) -{ - s3c_irq_demux_timer(irq, IRQ_TIMER0); -} - -static void s3c_irq_demux_timer1(unsigned int irq, struct irq_desc *desc) -{ - s3c_irq_demux_timer(irq, IRQ_TIMER1); -} - -static void s3c_irq_demux_timer2(unsigned int irq, struct irq_desc *desc) -{ - s3c_irq_demux_timer(irq, IRQ_TIMER2); -} - -static void s3c_irq_demux_timer3(unsigned int irq, struct irq_desc *desc) -{ - s3c_irq_demux_timer(irq, IRQ_TIMER3); -} - -static void s3c_irq_demux_timer4(unsigned int irq, struct irq_desc *desc) -{ - s3c_irq_demux_timer(irq, IRQ_TIMER4); -} - -/* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */ - -static void s3c_irq_timer_mask(unsigned int irq) -{ - u32 reg = __raw_readl(S3C64XX_TINT_CSTAT); - - reg &= 0x1f; /* mask out pending interrupts */ - reg &= ~(1 << (irq - IRQ_TIMER0)); - __raw_writel(reg, S3C64XX_TINT_CSTAT); -} - -static void s3c_irq_timer_unmask(unsigned int irq) -{ - u32 reg = __raw_readl(S3C64XX_TINT_CSTAT); - - reg &= 0x1f; /* mask out pending interrupts */ - reg |= 1 << (irq - IRQ_TIMER0); - __raw_writel(reg, S3C64XX_TINT_CSTAT); -} - -static void s3c_irq_timer_ack(unsigned int irq) -{ - u32 reg = __raw_readl(S3C64XX_TINT_CSTAT); - - reg &= 0x1f; - reg |= (1 << 5) << (irq - IRQ_TIMER0); - __raw_writel(reg, S3C64XX_TINT_CSTAT); -} - -static struct irq_chip s3c_irq_timer = { - .name = "s3c-timer", - .mask = s3c_irq_timer_mask, - .unmask = s3c_irq_timer_unmask, - .ack = s3c_irq_timer_ack, -}; - -struct uart_irq { - void __iomem *regs; - unsigned int base_irq; - unsigned int parent_irq; -}; - -/* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3] - * are consecutive when looking up the interrupt in the demux routines. - */ -static struct uart_irq uart_irqs[] = { - [0] = { - .regs = S3C_VA_UART0, - .base_irq = IRQ_S3CUART_BASE0, - .parent_irq = IRQ_UART0, - }, - [1] = { - .regs = S3C_VA_UART1, - .base_irq = IRQ_S3CUART_BASE1, - .parent_irq = IRQ_UART1, - }, - [2] = { - .regs = S3C_VA_UART2, - .base_irq = IRQ_S3CUART_BASE2, - .parent_irq = IRQ_UART2, - }, - [3] = { - .regs = S3C_VA_UART3, - .base_irq = IRQ_S3CUART_BASE3, - .parent_irq = IRQ_UART3, - }, -}; - -static inline void __iomem *s3c_irq_uart_base(unsigned int irq) -{ - struct uart_irq *uirq = get_irq_chip_data(irq); - return uirq->regs; -} - -static inline unsigned int s3c_irq_uart_bit(unsigned int irq) -{ - return irq & 3; -} - -/* UART interrupt registers, not worth adding to seperate include header */ - -static void s3c_irq_uart_mask(unsigned int irq) -{ - void __iomem *regs = s3c_irq_uart_base(irq); - unsigned int bit = s3c_irq_uart_bit(irq); - u32 reg; - - reg = __raw_readl(regs + S3C64XX_UINTM); - reg |= (1 << bit); - __raw_writel(reg, regs + S3C64XX_UINTM); -} - -static void s3c_irq_uart_maskack(unsigned int irq) -{ - void __iomem *regs = s3c_irq_uart_base(irq); - unsigned int bit = s3c_irq_uart_bit(irq); - u32 reg; - - reg = __raw_readl(regs + S3C64XX_UINTM); - reg |= (1 << bit); - __raw_writel(reg, regs + S3C64XX_UINTM); - __raw_writel(1 << bit, regs + S3C64XX_UINTP); -} - -static void s3c_irq_uart_unmask(unsigned int irq) -{ - void __iomem *regs = s3c_irq_uart_base(irq); - unsigned int bit = s3c_irq_uart_bit(irq); - u32 reg; - - reg = __raw_readl(regs + S3C64XX_UINTM); - reg &= ~(1 << bit); - __raw_writel(reg, regs + S3C64XX_UINTM); -} - -static void s3c_irq_uart_ack(unsigned int irq) -{ - void __iomem *regs = s3c_irq_uart_base(irq); - unsigned int bit = s3c_irq_uart_bit(irq); - - __raw_writel(1 << bit, regs + S3C64XX_UINTP); -} - -static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc) -{ - struct uart_irq *uirq = &uart_irqs[irq - IRQ_UART0]; - u32 pend = __raw_readl(uirq->regs + S3C64XX_UINTP); - int base = uirq->base_irq; - - if (pend & (1 << 0)) - generic_handle_irq(base); - if (pend & (1 << 1)) - generic_handle_irq(base + 1); - if (pend & (1 << 2)) - generic_handle_irq(base + 2); - if (pend & (1 << 3)) - generic_handle_irq(base + 3); -} - -static struct irq_chip s3c_irq_uart = { - .name = "s3c-uart", - .mask = s3c_irq_uart_mask, - .unmask = s3c_irq_uart_unmask, - .mask_ack = s3c_irq_uart_maskack, - .ack = s3c_irq_uart_ack, -}; - -static void __init s3c64xx_uart_irq(struct uart_irq *uirq) -{ - void __iomem *reg_base = uirq->regs; - unsigned int irq; - int offs; - - /* mask all interrupts at the start. */ - __raw_writel(0xf, reg_base + S3C64XX_UINTM); - - for (offs = 0; offs < 3; offs++) { - irq = uirq->base_irq + offs; - - set_irq_chip(irq, &s3c_irq_uart); - set_irq_chip_data(irq, uirq); - set_irq_handler(irq, handle_level_irq); - set_irq_flags(irq, IRQF_VALID); - } - - set_irq_chained_handler(uirq->parent_irq, s3c_irq_demux_uart); -} - -void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid) -{ - int uart, irq; - - printk(KERN_DEBUG "%s: initialising interrupts\n", __func__); - - /* initialise the pair of VICs */ - vic_init(S3C_VA_VIC0, S3C_VIC0_BASE, vic0_valid, 0); - vic_init(S3C_VA_VIC1, S3C_VIC1_BASE, vic1_valid, 0); - - /* add the timer sub-irqs */ - - set_irq_chained_handler(IRQ_TIMER0_VIC, s3c_irq_demux_timer0); - set_irq_chained_handler(IRQ_TIMER1_VIC, s3c_irq_demux_timer1); - set_irq_chained_handler(IRQ_TIMER2_VIC, s3c_irq_demux_timer2); - set_irq_chained_handler(IRQ_TIMER3_VIC, s3c_irq_demux_timer3); - set_irq_chained_handler(IRQ_TIMER4_VIC, s3c_irq_demux_timer4); - - for (irq = IRQ_TIMER0; irq <= IRQ_TIMER4; irq++) { - set_irq_chip(irq, &s3c_irq_timer); - set_irq_handler(irq, handle_level_irq); - set_irq_flags(irq, IRQF_VALID); - } - - for (uart = 0; uart < ARRAY_SIZE(uart_irqs); uart++) - s3c64xx_uart_irq(&uart_irqs[uart]); -} - - diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c deleted file mode 100644 index ffd56deb9e8..00000000000 --- a/arch/arm/plat-s3c64xx/s3c6400-clock.c +++ /dev/null @@ -1,758 +0,0 @@ -/* linux/arch/arm/plat-s3c64xx/s3c6400-clock.c - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C6400 based common clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/sysdev.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <mach/map.h> - -#include <plat/cpu-freq.h> - -#include <plat/regs-clock.h> -#include <plat/clock.h> -#include <plat/cpu.h> -#include <plat/pll.h> - -/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call - * ext_xtal_mux for want of an actual name from the manual. -*/ - -static struct clk clk_ext_xtal_mux = { - .name = "ext_xtal", - .id = -1, -}; - -#define clk_fin_apll clk_ext_xtal_mux -#define clk_fin_mpll clk_ext_xtal_mux -#define clk_fin_epll clk_ext_xtal_mux - -#define clk_fout_mpll clk_mpll -#define clk_fout_epll clk_epll - -struct clk_sources { - unsigned int nr_sources; - struct clk **sources; -}; - -struct clksrc_clk { - struct clk clk; - unsigned int mask; - unsigned int shift; - - struct clk_sources *sources; - - unsigned int divider_shift; - void __iomem *reg_divider; -}; - -static struct clk clk_fout_apll = { - .name = "fout_apll", - .id = -1, -}; - -static struct clk *clk_src_apll_list[] = { - [0] = &clk_fin_apll, - [1] = &clk_fout_apll, -}; - -static struct clk_sources clk_src_apll = { - .sources = clk_src_apll_list, - .nr_sources = ARRAY_SIZE(clk_src_apll_list), -}; - -static struct clksrc_clk clk_mout_apll = { - .clk = { - .name = "mout_apll", - .id = -1, - }, - .shift = S3C6400_CLKSRC_APLL_MOUT_SHIFT, - .mask = S3C6400_CLKSRC_APLL_MOUT, - .sources = &clk_src_apll, -}; - -static struct clk *clk_src_epll_list[] = { - [0] = &clk_fin_epll, - [1] = &clk_fout_epll, -}; - -static struct clk_sources clk_src_epll = { - .sources = clk_src_epll_list, - .nr_sources = ARRAY_SIZE(clk_src_epll_list), -}; - -static struct clksrc_clk clk_mout_epll = { - .clk = { - .name = "mout_epll", - .id = -1, - }, - .shift = S3C6400_CLKSRC_EPLL_MOUT_SHIFT, - .mask = S3C6400_CLKSRC_EPLL_MOUT, - .sources = &clk_src_epll, -}; - -static struct clk *clk_src_mpll_list[] = { - [0] = &clk_fin_mpll, - [1] = &clk_fout_mpll, -}; - -static struct clk_sources clk_src_mpll = { - .sources = clk_src_mpll_list, - .nr_sources = ARRAY_SIZE(clk_src_mpll_list), -}; - -static struct clksrc_clk clk_mout_mpll = { - .clk = { - .name = "mout_mpll", - .id = -1, - }, - .shift = S3C6400_CLKSRC_MPLL_MOUT_SHIFT, - .mask = S3C6400_CLKSRC_MPLL_MOUT, - .sources = &clk_src_mpll, -}; - -static unsigned int armclk_mask; - -static unsigned long s3c64xx_clk_arm_get_rate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - u32 clkdiv; - - /* divisor mask starts at bit0, so no need to shift */ - clkdiv = __raw_readl(S3C_CLK_DIV0) & armclk_mask; - - return rate / (clkdiv + 1); -} - -static unsigned long s3c64xx_clk_arm_round_rate(struct clk *clk, - unsigned long rate) -{ - unsigned long parent = clk_get_rate(clk->parent); - u32 div; - - if (parent < rate) - return parent; - - div = (parent / rate) - 1; - if (div > armclk_mask) - div = armclk_mask; - - return parent / (div + 1); -} - -static int s3c64xx_clk_arm_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned long parent = clk_get_rate(clk->parent); - u32 div; - u32 val; - - if (rate < parent / (armclk_mask + 1)) - return -EINVAL; - - rate = clk_round_rate(clk, rate); - div = clk_get_rate(clk->parent) / rate; - - val = __raw_readl(S3C_CLK_DIV0); - val &= ~armclk_mask; - val |= (div - 1); - __raw_writel(val, S3C_CLK_DIV0); - - return 0; - -} - -static struct clk clk_arm = { - .name = "armclk", - .id = -1, - .parent = &clk_mout_apll.clk, - .get_rate = s3c64xx_clk_arm_get_rate, - .set_rate = s3c64xx_clk_arm_set_rate, - .round_rate = s3c64xx_clk_arm_round_rate, -}; - -static unsigned long s3c64xx_clk_doutmpll_get_rate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - - printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate); - - if (__raw_readl(S3C_CLK_DIV0) & S3C6400_CLKDIV0_MPLL_MASK) - rate /= 2; - - return rate; -} - -static struct clk clk_dout_mpll = { - .name = "dout_mpll", - .id = -1, - .parent = &clk_mout_mpll.clk, - .get_rate = s3c64xx_clk_doutmpll_get_rate, -}; - -static struct clk *clkset_spi_mmc_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll, - &clk_fin_epll, - &clk_27m, -}; - -static struct clk_sources clkset_spi_mmc = { - .sources = clkset_spi_mmc_list, - .nr_sources = ARRAY_SIZE(clkset_spi_mmc_list), -}; - -static struct clk *clkset_irda_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll, - NULL, - &clk_27m, -}; - -static struct clk_sources clkset_irda = { - .sources = clkset_irda_list, - .nr_sources = ARRAY_SIZE(clkset_irda_list), -}; - -static struct clk *clkset_uart_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll, - NULL, - NULL -}; - -static struct clk_sources clkset_uart = { - .sources = clkset_uart_list, - .nr_sources = ARRAY_SIZE(clkset_uart_list), -}; - -static struct clk *clkset_uhost_list[] = { - &clk_48m, - &clk_mout_epll.clk, - &clk_dout_mpll, - &clk_fin_epll, -}; - -static struct clk_sources clkset_uhost = { - .sources = clkset_uhost_list, - .nr_sources = ARRAY_SIZE(clkset_uhost_list), -}; - - -/* The peripheral clocks are all controlled via clocksource followed - * by an optional divider and gate stage. We currently roll this into - * one clock which hides the intermediate clock from the mux. - * - * Note, the JPEG clock can only be an even divider... - * - * The scaler and LCD clocks depend on the S3C64XX version, and also - * have a common parent divisor so are not included here. - */ - -static inline struct clksrc_clk *to_clksrc(struct clk *clk) -{ - return container_of(clk, struct clksrc_clk, clk); -} - -static unsigned long s3c64xx_getrate_clksrc(struct clk *clk) -{ - struct clksrc_clk *sclk = to_clksrc(clk); - unsigned long rate = clk_get_rate(clk->parent); - u32 clkdiv = __raw_readl(sclk->reg_divider); - - clkdiv >>= sclk->divider_shift; - clkdiv &= 0xf; - clkdiv++; - - rate /= clkdiv; - return rate; -} - -static int s3c64xx_setrate_clksrc(struct clk *clk, unsigned long rate) -{ - struct clksrc_clk *sclk = to_clksrc(clk); - void __iomem *reg = sclk->reg_divider; - unsigned int div; - u32 val; - - rate = clk_round_rate(clk, rate); - div = clk_get_rate(clk->parent) / rate; - if (div > 16) - return -EINVAL; - - val = __raw_readl(reg); - val &= ~(0xf << sclk->divider_shift); - val |= (div - 1) << sclk->divider_shift; - __raw_writel(val, reg); - - return 0; -} - -static int s3c64xx_setparent_clksrc(struct clk *clk, struct clk *parent) -{ - struct clksrc_clk *sclk = to_clksrc(clk); - struct clk_sources *srcs = sclk->sources; - u32 clksrc = __raw_readl(S3C_CLK_SRC); - int src_nr = -1; - int ptr; - - for (ptr = 0; ptr < srcs->nr_sources; ptr++) - if (srcs->sources[ptr] == parent) { - src_nr = ptr; - break; - } - - if (src_nr >= 0) { - clksrc &= ~sclk->mask; - clksrc |= src_nr << sclk->shift; - - __raw_writel(clksrc, S3C_CLK_SRC); - - clk->parent = parent; - return 0; - } - - return -EINVAL; -} - -static unsigned long s3c64xx_roundrate_clksrc(struct clk *clk, - unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - int div; - - if (rate > parent_rate) - rate = parent_rate; - else { - div = parent_rate / rate; - - if (div == 0) - div = 1; - if (div > 16) - div = 16; - - rate = parent_rate / div; - } - - return rate; -} - -static struct clksrc_clk clk_mmc0 = { - .clk = { - .name = "mmc_bus", - .id = 0, - .ctrlbit = S3C_CLKCON_SCLK_MMC0, - .enable = s3c64xx_sclk_ctrl, - .set_parent = s3c64xx_setparent_clksrc, - .get_rate = s3c64xx_getrate_clksrc, - .set_rate = s3c64xx_setrate_clksrc, - .round_rate = s3c64xx_roundrate_clksrc, - }, - .shift = S3C6400_CLKSRC_MMC0_SHIFT, - .mask = S3C6400_CLKSRC_MMC0_MASK, - .sources = &clkset_spi_mmc, - .divider_shift = S3C6400_CLKDIV1_MMC0_SHIFT, - .reg_divider = S3C_CLK_DIV1, -}; - -static struct clksrc_clk clk_mmc1 = { - .clk = { - .name = "mmc_bus", - .id = 1, - .ctrlbit = S3C_CLKCON_SCLK_MMC1, - .enable = s3c64xx_sclk_ctrl, - .get_rate = s3c64xx_getrate_clksrc, - .set_rate = s3c64xx_setrate_clksrc, - .set_parent = s3c64xx_setparent_clksrc, - .round_rate = s3c64xx_roundrate_clksrc, - }, - .shift = S3C6400_CLKSRC_MMC1_SHIFT, - .mask = S3C6400_CLKSRC_MMC1_MASK, - .sources = &clkset_spi_mmc, - .divider_shift = S3C6400_CLKDIV1_MMC1_SHIFT, - .reg_divider = S3C_CLK_DIV1, -}; - -static struct clksrc_clk clk_mmc2 = { - .clk = { - .name = "mmc_bus", - .id = 2, - .ctrlbit = S3C_CLKCON_SCLK_MMC2, - .enable = s3c64xx_sclk_ctrl, - .get_rate = s3c64xx_getrate_clksrc, - .set_rate = s3c64xx_setrate_clksrc, - .set_parent = s3c64xx_setparent_clksrc, - .round_rate = s3c64xx_roundrate_clksrc, - }, - .shift = S3C6400_CLKSRC_MMC2_SHIFT, - .mask = S3C6400_CLKSRC_MMC2_MASK, - .sources = &clkset_spi_mmc, - .divider_shift = S3C6400_CLKDIV1_MMC2_SHIFT, - .reg_divider = S3C_CLK_DIV1, -}; - -static struct clksrc_clk clk_usbhost = { - .clk = { - .name = "usb-bus-host", - .id = -1, - .ctrlbit = S3C_CLKCON_SCLK_UHOST, - .enable = s3c64xx_sclk_ctrl, - .set_parent = s3c64xx_setparent_clksrc, - .get_rate = s3c64xx_getrate_clksrc, - .set_rate = s3c64xx_setrate_clksrc, - .round_rate = s3c64xx_roundrate_clksrc, - }, - .shift = S3C6400_CLKSRC_UHOST_SHIFT, - .mask = S3C6400_CLKSRC_UHOST_MASK, - .sources = &clkset_uhost, - .divider_shift = S3C6400_CLKDIV1_UHOST_SHIFT, - .reg_divider = S3C_CLK_DIV1, -}; - -static struct clksrc_clk clk_uart_uclk1 = { - .clk = { - .name = "uclk1", - .id = -1, - .ctrlbit = S3C_CLKCON_SCLK_UART, - .enable = s3c64xx_sclk_ctrl, - .set_parent = s3c64xx_setparent_clksrc, - .get_rate = s3c64xx_getrate_clksrc, - .set_rate = s3c64xx_setrate_clksrc, - .round_rate = s3c64xx_roundrate_clksrc, - }, - .shift = S3C6400_CLKSRC_UART_SHIFT, - .mask = S3C6400_CLKSRC_UART_MASK, - .sources = &clkset_uart, - .divider_shift = S3C6400_CLKDIV2_UART_SHIFT, - .reg_divider = S3C_CLK_DIV2, -}; - -/* Where does UCLK0 come from? */ - -static struct clksrc_clk clk_spi0 = { - .clk = { - .name = "spi-bus", - .id = 0, - .ctrlbit = S3C_CLKCON_SCLK_SPI0, - .enable = s3c64xx_sclk_ctrl, - .set_parent = s3c64xx_setparent_clksrc, - .get_rate = s3c64xx_getrate_clksrc, - .set_rate = s3c64xx_setrate_clksrc, - .round_rate = s3c64xx_roundrate_clksrc, - }, - .shift = S3C6400_CLKSRC_SPI0_SHIFT, - .mask = S3C6400_CLKSRC_SPI0_MASK, - .sources = &clkset_spi_mmc, - .divider_shift = S3C6400_CLKDIV2_SPI0_SHIFT, - .reg_divider = S3C_CLK_DIV2, -}; - -static struct clksrc_clk clk_spi1 = { - .clk = { - .name = "spi-bus", - .id = 1, - .ctrlbit = S3C_CLKCON_SCLK_SPI1, - .enable = s3c64xx_sclk_ctrl, - .set_parent = s3c64xx_setparent_clksrc, - .get_rate = s3c64xx_getrate_clksrc, - .set_rate = s3c64xx_setrate_clksrc, - .round_rate = s3c64xx_roundrate_clksrc, - }, - .shift = S3C6400_CLKSRC_SPI1_SHIFT, - .mask = S3C6400_CLKSRC_SPI1_MASK, - .sources = &clkset_spi_mmc, - .divider_shift = S3C6400_CLKDIV2_SPI1_SHIFT, - .reg_divider = S3C_CLK_DIV2, -}; - -static struct clk clk_iis_cd0 = { - .name = "iis_cdclk0", - .id = -1, -}; - -static struct clk clk_iis_cd1 = { - .name = "iis_cdclk1", - .id = -1, -}; - -static struct clk clk_pcm_cd = { - .name = "pcm_cdclk", - .id = -1, -}; - -static struct clk *clkset_audio0_list[] = { - [0] = &clk_mout_epll.clk, - [1] = &clk_dout_mpll, - [2] = &clk_fin_epll, - [3] = &clk_iis_cd0, - [4] = &clk_pcm_cd, -}; - -static struct clk_sources clkset_audio0 = { - .sources = clkset_audio0_list, - .nr_sources = ARRAY_SIZE(clkset_audio0_list), -}; - -static struct clksrc_clk clk_audio0 = { - .clk = { - .name = "audio-bus", - .id = 0, - .ctrlbit = S3C_CLKCON_SCLK_AUDIO0, - .enable = s3c64xx_sclk_ctrl, - .set_parent = s3c64xx_setparent_clksrc, - .get_rate = s3c64xx_getrate_clksrc, - .set_rate = s3c64xx_setrate_clksrc, - .round_rate = s3c64xx_roundrate_clksrc, - }, - .shift = S3C6400_CLKSRC_AUDIO0_SHIFT, - .mask = S3C6400_CLKSRC_AUDIO0_MASK, - .sources = &clkset_audio0, - .divider_shift = S3C6400_CLKDIV2_AUDIO0_SHIFT, - .reg_divider = S3C_CLK_DIV2, -}; - -static struct clk *clkset_audio1_list[] = { - [0] = &clk_mout_epll.clk, - [1] = &clk_dout_mpll, - [2] = &clk_fin_epll, - [3] = &clk_iis_cd1, - [4] = &clk_pcm_cd, -}; - -static struct clk_sources clkset_audio1 = { - .sources = clkset_audio1_list, - .nr_sources = ARRAY_SIZE(clkset_audio1_list), -}; - -static struct clksrc_clk clk_audio1 = { - .clk = { - .name = "audio-bus", - .id = 1, - .ctrlbit = S3C_CLKCON_SCLK_AUDIO1, - .enable = s3c64xx_sclk_ctrl, - .set_parent = s3c64xx_setparent_clksrc, - .get_rate = s3c64xx_getrate_clksrc, - .set_rate = s3c64xx_setrate_clksrc, - .round_rate = s3c64xx_roundrate_clksrc, - }, - .shift = S3C6400_CLKSRC_AUDIO1_SHIFT, - .mask = S3C6400_CLKSRC_AUDIO1_MASK, - .sources = &clkset_audio1, - .divider_shift = S3C6400_CLKDIV2_AUDIO1_SHIFT, - .reg_divider = S3C_CLK_DIV2, -}; - -static struct clksrc_clk clk_irda = { - .clk = { - .name = "irda-bus", - .id = 0, - .ctrlbit = S3C_CLKCON_SCLK_IRDA, - .enable = s3c64xx_sclk_ctrl, - .set_parent = s3c64xx_setparent_clksrc, - .get_rate = s3c64xx_getrate_clksrc, - .set_rate = s3c64xx_setrate_clksrc, - .round_rate = s3c64xx_roundrate_clksrc, - }, - .shift = S3C6400_CLKSRC_IRDA_SHIFT, - .mask = S3C6400_CLKSRC_IRDA_MASK, - .sources = &clkset_irda, - .divider_shift = S3C6400_CLKDIV2_IRDA_SHIFT, - .reg_divider = S3C_CLK_DIV2, -}; - -static struct clk *clkset_camif_list[] = { - &clk_h2, -}; - -static struct clk_sources clkset_camif = { - .sources = clkset_camif_list, - .nr_sources = ARRAY_SIZE(clkset_camif_list), -}; - -static struct clksrc_clk clk_camif = { - .clk = { - .name = "camera", - .id = -1, - .ctrlbit = S3C_CLKCON_SCLK_CAM, - .enable = s3c64xx_sclk_ctrl, - .set_parent = s3c64xx_setparent_clksrc, - .get_rate = s3c64xx_getrate_clksrc, - .set_rate = s3c64xx_setrate_clksrc, - .round_rate = s3c64xx_roundrate_clksrc, - }, - .shift = 0, - .mask = 0, - .sources = &clkset_camif, - .divider_shift = S3C6400_CLKDIV0_CAM_SHIFT, - .reg_divider = S3C_CLK_DIV0, -}; - -/* Clock initialisation code */ - -static struct clksrc_clk *init_parents[] = { - &clk_mout_apll, - &clk_mout_epll, - &clk_mout_mpll, - &clk_mmc0, - &clk_mmc1, - &clk_mmc2, - &clk_usbhost, - &clk_uart_uclk1, - &clk_spi0, - &clk_spi1, - &clk_audio0, - &clk_audio1, - &clk_irda, - &clk_camif, -}; - -static void __init_or_cpufreq s3c6400_set_clksrc(struct clksrc_clk *clk) -{ - struct clk_sources *srcs = clk->sources; - u32 clksrc = __raw_readl(S3C_CLK_SRC); - - clksrc &= clk->mask; - clksrc >>= clk->shift; - - if (clksrc > srcs->nr_sources || !srcs->sources[clksrc]) { - printk(KERN_ERR "%s: bad source %d\n", - clk->clk.name, clksrc); - return; - } - - clk->clk.parent = srcs->sources[clksrc]; - - printk(KERN_INFO "%s: source is %s (%d), rate is %ld\n", - clk->clk.name, clk->clk.parent->name, clksrc, - clk_get_rate(&clk->clk)); -} - -#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1) - -void __init_or_cpufreq s3c6400_setup_clocks(void) -{ - struct clk *xtal_clk; - unsigned long xtal; - unsigned long fclk; - unsigned long hclk; - unsigned long hclk2; - unsigned long pclk; - unsigned long epll; - unsigned long apll; - unsigned long mpll; - unsigned int ptr; - u32 clkdiv0; - - printk(KERN_DEBUG "%s: registering clocks\n", __func__); - - clkdiv0 = __raw_readl(S3C_CLK_DIV0); - printk(KERN_DEBUG "%s: clkdiv0 = %08x\n", __func__, clkdiv0); - - xtal_clk = clk_get(NULL, "xtal"); - BUG_ON(IS_ERR(xtal_clk)); - - xtal = clk_get_rate(xtal_clk); - clk_put(xtal_clk); - - printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal); - - /* For now assume the mux always selects the crystal */ - clk_ext_xtal_mux.parent = xtal_clk; - - epll = s3c6400_get_epll(xtal); - mpll = s3c6400_get_pll(xtal, __raw_readl(S3C_MPLL_CON)); - apll = s3c6400_get_pll(xtal, __raw_readl(S3C_APLL_CON)); - - fclk = mpll; - - printk(KERN_INFO "S3C64XX: PLL settings, A=%ld, M=%ld, E=%ld\n", - apll, mpll, epll); - - hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2); - hclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK); - pclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_PCLK); - - printk(KERN_INFO "S3C64XX: HCLK2=%ld, HCLK=%ld, PCLK=%ld\n", - hclk2, hclk, pclk); - - clk_fout_mpll.rate = mpll; - clk_fout_epll.rate = epll; - clk_fout_apll.rate = apll; - - clk_h2.rate = hclk2; - clk_h.rate = hclk; - clk_p.rate = pclk; - clk_f.rate = fclk; - - for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++) - s3c6400_set_clksrc(init_parents[ptr]); -} - -static struct clk *clks[] __initdata = { - &clk_ext_xtal_mux, - &clk_iis_cd0, - &clk_iis_cd1, - &clk_pcm_cd, - &clk_mout_epll.clk, - &clk_mout_mpll.clk, - &clk_dout_mpll, - &clk_mmc0.clk, - &clk_mmc1.clk, - &clk_mmc2.clk, - &clk_usbhost.clk, - &clk_uart_uclk1.clk, - &clk_spi0.clk, - &clk_spi1.clk, - &clk_audio0.clk, - &clk_audio1.clk, - &clk_irda.clk, - &clk_camif.clk, - &clk_arm, -}; - -/** - * s3c6400_register_clocks - register clocks for s3c6400 and above - * @armclk_divlimit: Divisor mask for ARMCLK - * - * Register the clocks for the S3C6400 and above SoC range, such - * as ARMCLK and the clocks which have divider chains attached. - * - * This call does not setup the clocks, which is left to the - * s3c6400_setup_clocks() call which may be needed by the cpufreq - * or resume code to re-set the clocks if the bootloader has changed - * them. - */ -void __init s3c6400_register_clocks(unsigned armclk_divlimit) -{ - struct clk *clkp; - int ret; - int ptr; - - armclk_mask = armclk_divlimit; - - for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) { - clkp = clks[ptr]; - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - } -} diff --git a/arch/arm/plat-s3c64xx/s3c6400-init.c b/arch/arm/plat-s3c64xx/s3c6400-init.c deleted file mode 100644 index 6c28f39df09..00000000000 --- a/arch/arm/plat-s3c64xx/s3c6400-init.c +++ /dev/null @@ -1,29 +0,0 @@ -/* linux/arch/arm/plat-s3c64xx/s3c6400-init.c - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C6400 - CPU initialisation (common with other S3C64XX chips) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> - -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/s3c6400.h> -#include <plat/s3c6410.h> - -/* uart registration process */ - -void __init s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) -{ - s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no); -} diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig new file mode 100644 index 00000000000..d400a6a20fe --- /dev/null +++ b/arch/arm/plat-s5p/Kconfig @@ -0,0 +1,25 @@ +# arch/arm/plat-s5p/Kconfig +# +# Copyright (c) 2009 Samsung Electronics Co., Ltd. +# http://www.samsung.com/ +# +# Licensed under GPLv2 + +config PLAT_S5P + bool + depends on (ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PV210) + default y + select ARM_VIC + select NO_IOPORT + select ARCH_REQUIRE_GPIOLIB + select S3C_GPIO_TRACK + select SAMSUNG_GPIOLIB_4BIT + select S3C_GPIO_CFG_S3C64XX + select S3C_GPIO_PULL_UPDOWN + select S3C_GPIO_CFG_S3C24XX + select PLAT_SAMSUNG + select SAMSUNG_CLKSRC + select SAMSUNG_IRQ_VIC_TIMER + select SAMSUNG_IRQ_UART + help + Base platform code for Samsung's S5P series SoC. diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile new file mode 100644 index 00000000000..a7c54b332d2 --- /dev/null +++ b/arch/arm/plat-s5p/Makefile @@ -0,0 +1,19 @@ +# arch/arm/plat-s5p/Makefile +# +# Copyright (c) 2009 Samsung Electronics Co., Ltd. +# http://www.samsung.com/ +# +# Licensed under GPLv2 + +obj-y := +obj-m := +obj-n := dummy.o +obj- := + +# Core files + +obj-y += dev-uart.o +obj-y += cpu.o +obj-y += clock.o +obj-y += irq.o +obj-y += setup-i2c0.o diff --git a/arch/arm/plat-s5p/clock.c b/arch/arm/plat-s5p/clock.c new file mode 100644 index 00000000000..aa96e335073 --- /dev/null +++ b/arch/arm/plat-s5p/clock.c @@ -0,0 +1,149 @@ +/* linux/arch/arm/plat-s5p/clock.c + * + * Copyright 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P - Common clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/sysdev.h> +#include <linux/io.h> +#include <asm/div64.h> + +#include <plat/clock.h> +#include <plat/clock-clksrc.h> +#include <plat/s5p-clock.h> + +/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call + * clk_ext_xtal_mux. +*/ +struct clk clk_ext_xtal_mux = { + .name = "ext_xtal", + .id = -1, +}; + +static struct clk s5p_clk_27m = { + .name = "clk_27m", + .id = -1, + .rate = 27000000, +}; + +/* 48MHz USB Phy clock output */ +struct clk clk_48m = { + .name = "clk_48m", + .id = -1, + .rate = 48000000, +}; + +/* APLL clock output + * No need .ctrlbit, this is always on +*/ +struct clk clk_fout_apll = { + .name = "fout_apll", + .id = -1, +}; + +/* MPLL clock output + * No need .ctrlbit, this is always on +*/ +struct clk clk_fout_mpll = { + .name = "fout_mpll", + .id = -1, +}; + +/* EPLL clock output */ +struct clk clk_fout_epll = { + .name = "fout_epll", + .id = -1, + .ctrlbit = (1 << 31), +}; + +/* ARM clock */ +struct clk clk_arm = { + .name = "armclk", + .id = -1, + .rate = 0, + .ctrlbit = 0, +}; + +/* Possible clock sources for APLL Mux */ +static struct clk *clk_src_apll_list[] = { + [0] = &clk_fin_apll, + [1] = &clk_fout_apll, +}; + +struct clksrc_sources clk_src_apll = { + .sources = clk_src_apll_list, + .nr_sources = ARRAY_SIZE(clk_src_apll_list), +}; + +/* Possible clock sources for MPLL Mux */ +static struct clk *clk_src_mpll_list[] = { + [0] = &clk_fin_mpll, + [1] = &clk_fout_mpll, +}; + +struct clksrc_sources clk_src_mpll = { + .sources = clk_src_mpll_list, + .nr_sources = ARRAY_SIZE(clk_src_mpll_list), +}; + +/* Possible clock sources for EPLL Mux */ +static struct clk *clk_src_epll_list[] = { + [0] = &clk_fin_epll, + [1] = &clk_fout_epll, +}; + +struct clksrc_sources clk_src_epll = { + .sources = clk_src_epll_list, + .nr_sources = ARRAY_SIZE(clk_src_epll_list), +}; + +struct clk clk_vpll = { + .name = "vpll", + .id = -1, +}; + +int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable) +{ + unsigned int ctrlbit = clk->ctrlbit; + u32 con; + + con = __raw_readl(reg); + con = enable ? (con | ctrlbit) : (con & ~ctrlbit); + __raw_writel(con, reg); + return 0; +} + +static struct clk *s5p_clks[] __initdata = { + &clk_ext_xtal_mux, + &clk_48m, + &s5p_clk_27m, + &clk_fout_apll, + &clk_fout_mpll, + &clk_fout_epll, + &clk_arm, + &clk_vpll, +}; + +void __init s5p_register_clocks(unsigned long xtal_freq) +{ + int ret; + + clk_ext_xtal_mux.rate = xtal_freq; + + ret = s3c24xx_register_clocks(s5p_clks, ARRAY_SIZE(s5p_clks)); + if (ret > 0) + printk(KERN_ERR "Failed to register s5p clocks\n"); +} diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c new file mode 100644 index 00000000000..f92e5de3a75 --- /dev/null +++ b/arch/arm/plat-s5p/cpu.c @@ -0,0 +1,113 @@ +/* linux/arch/arm/plat-s5p/cpu.c + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P CPU Support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <mach/map.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <mach/regs-clock.h> +#include <plat/cpu.h> +#include <plat/s5p6440.h> +#include <plat/s5p6442.h> +#include <plat/s5pv210.h> + +/* table of supported CPUs */ + +static const char name_s5p6440[] = "S5P6440"; +static const char name_s5p6442[] = "S5P6442"; +static const char name_s5pv210[] = "S5PV210/S5PC110"; + +static struct cpu_table cpu_ids[] __initdata = { + { + .idcode = 0x56440100, + .idmask = 0xffffff00, + .map_io = s5p6440_map_io, + .init_clocks = s5p6440_init_clocks, + .init_uarts = s5p6440_init_uarts, + .init = s5p6440_init, + .name = name_s5p6440, + }, { + .idcode = 0x36442000, + .idmask = 0xffffff00, + .map_io = s5p6442_map_io, + .init_clocks = s5p6442_init_clocks, + .init_uarts = s5p6442_init_uarts, + .init = s5p6442_init, + .name = name_s5p6442, + }, { + .idcode = 0x43110000, + .idmask = 0xfffff000, + .map_io = s5pv210_map_io, + .init_clocks = s5pv210_init_clocks, + .init_uarts = s5pv210_init_uarts, + .init = s5pv210_init, + .name = name_s5pv210, + }, +}; + +/* minimal IO mapping */ + +static struct map_desc s5p_iodesc[] __initdata = { + { + .virtual = (unsigned long)S5P_VA_CHIPID, + .pfn = __phys_to_pfn(S5P_PA_CHIPID), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_SYS, + .pfn = __phys_to_pfn(S5P_PA_SYSCON), + .length = SZ_64K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_UART, + .pfn = __phys_to_pfn(S3C_PA_UART), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)VA_VIC0, + .pfn = __phys_to_pfn(S5P_PA_VIC0), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)VA_VIC1, + .pfn = __phys_to_pfn(S5P_PA_VIC1), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_TIMER, + .pfn = __phys_to_pfn(S5P_PA_TIMER), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_GPIO, + .pfn = __phys_to_pfn(S5P_PA_GPIO), + .length = SZ_4K, + .type = MT_DEVICE, + }, +}; + +/* read cpu identification code */ + +void __init s5p_init_io(struct map_desc *mach_desc, + int size, void __iomem *cpuid_addr) +{ + unsigned long idcode; + + /* initialize the io descriptors we need for initialization */ + iotable_init(s5p_iodesc, ARRAY_SIZE(s5p_iodesc)); + if (mach_desc) + iotable_init(mach_desc, size); + + idcode = __raw_readl(cpuid_addr); + s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids)); +} diff --git a/arch/arm/plat-s5p/dev-uart.c b/arch/arm/plat-s5p/dev-uart.c new file mode 100644 index 00000000000..a89331ef4ae --- /dev/null +++ b/arch/arm/plat-s5p/dev-uart.c @@ -0,0 +1,139 @@ +/* linux/arch/arm/plat-s5p/dev-uart.c + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Base S5P UART resource and device definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/platform_device.h> + +#include <asm/mach/arch.h> +#include <asm/mach/irq.h> +#include <mach/hardware.h> +#include <mach/map.h> + +#include <plat/devs.h> + + /* Serial port registrations */ + +static struct resource s5p_uart0_resource[] = { + [0] = { + .start = S5P_PA_UART0, + .end = S5P_PA_UART0 + S5P_SZ_UART, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_S5P_UART_RX0, + .end = IRQ_S5P_UART_RX0, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_S5P_UART_TX0, + .end = IRQ_S5P_UART_TX0, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = IRQ_S5P_UART_ERR0, + .end = IRQ_S5P_UART_ERR0, + .flags = IORESOURCE_IRQ, + } +}; + +static struct resource s5p_uart1_resource[] = { + [0] = { + .start = S5P_PA_UART1, + .end = S5P_PA_UART1 + S5P_SZ_UART, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_S5P_UART_RX1, + .end = IRQ_S5P_UART_RX1, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_S5P_UART_TX1, + .end = IRQ_S5P_UART_TX1, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = IRQ_S5P_UART_ERR1, + .end = IRQ_S5P_UART_ERR1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource s5p_uart2_resource[] = { + [0] = { + .start = S5P_PA_UART2, + .end = S5P_PA_UART2 + S5P_SZ_UART, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_S5P_UART_RX2, + .end = IRQ_S5P_UART_RX2, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_S5P_UART_TX2, + .end = IRQ_S5P_UART_TX2, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = IRQ_S5P_UART_ERR2, + .end = IRQ_S5P_UART_ERR2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource s5p_uart3_resource[] = { +#if CONFIG_SERIAL_SAMSUNG_UARTS > 3 + [0] = { + .start = S5P_PA_UART3, + .end = S5P_PA_UART3 + S5P_SZ_UART, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_S5P_UART_RX3, + .end = IRQ_S5P_UART_RX3, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_S5P_UART_TX3, + .end = IRQ_S5P_UART_TX3, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = IRQ_S5P_UART_ERR3, + .end = IRQ_S5P_UART_ERR3, + .flags = IORESOURCE_IRQ, + }, +#endif +}; + +struct s3c24xx_uart_resources s5p_uart_resources[] __initdata = { + [0] = { + .resources = s5p_uart0_resource, + .nr_resources = ARRAY_SIZE(s5p_uart0_resource), + }, + [1] = { + .resources = s5p_uart1_resource, + .nr_resources = ARRAY_SIZE(s5p_uart1_resource), + }, + [2] = { + .resources = s5p_uart2_resource, + .nr_resources = ARRAY_SIZE(s5p_uart2_resource), + }, + [3] = { + .resources = s5p_uart3_resource, + .nr_resources = ARRAY_SIZE(s5p_uart3_resource), + }, +}; diff --git a/arch/arm/plat-s5p/include/plat/irqs.h b/arch/arm/plat-s5p/include/plat/irqs.h new file mode 100644 index 00000000000..42e757f2e40 --- /dev/null +++ b/arch/arm/plat-s5p/include/plat/irqs.h @@ -0,0 +1,90 @@ +/* linux/arch/arm/plat-s5p/include/plat/irqs.h + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P Common IRQ support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_PLAT_S5P_IRQS_H +#define __ASM_PLAT_S5P_IRQS_H __FILE__ + +/* we keep the first set of CPU IRQs out of the range of + * the ISA space, so that the PC104 has them to itself + * and we don't end up having to do horrible things to the + * standard ISA drivers.... + * + * note, since we're using the VICs, our start must be a + * mulitple of 32 to allow the common code to work + */ + +#define S5P_IRQ_OFFSET (32) + +#define S5P_IRQ(x) ((x) + S5P_IRQ_OFFSET) + +#define S5P_VIC0_BASE S5P_IRQ(0) +#define S5P_VIC1_BASE S5P_IRQ(32) +#define S5P_VIC2_BASE S5P_IRQ(64) +#define S5P_VIC3_BASE S5P_IRQ(96) + +#define VIC_BASE(x) (S5P_VIC0_BASE + ((x)*32)) + +#define IRQ_VIC0_BASE S5P_VIC0_BASE +#define IRQ_VIC1_BASE S5P_VIC1_BASE +#define IRQ_VIC2_BASE S5P_VIC2_BASE + +/* UART interrupts, each UART has 4 intterupts per channel so + * use the space between the ISA and S3C main interrupts. Note, these + * are not in the same order as the S3C24XX series! */ + +#define IRQ_S5P_UART_BASE0 (16) +#define IRQ_S5P_UART_BASE1 (20) +#define IRQ_S5P_UART_BASE2 (24) +#define IRQ_S5P_UART_BASE3 (28) + +#define UART_IRQ_RXD (0) +#define UART_IRQ_ERR (1) +#define UART_IRQ_TXD (2) + +#define IRQ_S5P_UART_RX0 (IRQ_S5P_UART_BASE0 + UART_IRQ_RXD) +#define IRQ_S5P_UART_TX0 (IRQ_S5P_UART_BASE0 + UART_IRQ_TXD) +#define IRQ_S5P_UART_ERR0 (IRQ_S5P_UART_BASE0 + UART_IRQ_ERR) + +#define IRQ_S5P_UART_RX1 (IRQ_S5P_UART_BASE1 + UART_IRQ_RXD) +#define IRQ_S5P_UART_TX1 (IRQ_S5P_UART_BASE1 + UART_IRQ_TXD) +#define IRQ_S5P_UART_ERR1 (IRQ_S5P_UART_BASE1 + UART_IRQ_ERR) + +#define IRQ_S5P_UART_RX2 (IRQ_S5P_UART_BASE2 + UART_IRQ_RXD) +#define IRQ_S5P_UART_TX2 (IRQ_S5P_UART_BASE2 + UART_IRQ_TXD) +#define IRQ_S5P_UART_ERR2 (IRQ_S5P_UART_BASE2 + UART_IRQ_ERR) + +#define IRQ_S5P_UART_RX3 (IRQ_S5P_UART_BASE3 + UART_IRQ_RXD) +#define IRQ_S5P_UART_TX3 (IRQ_S5P_UART_BASE3 + UART_IRQ_TXD) +#define IRQ_S5P_UART_ERR3 (IRQ_S5P_UART_BASE3 + UART_IRQ_ERR) + +/* S3C compatibilty defines */ +#define IRQ_S3CUART_RX0 IRQ_S5P_UART_RX0 +#define IRQ_S3CUART_RX1 IRQ_S5P_UART_RX1 +#define IRQ_S3CUART_RX2 IRQ_S5P_UART_RX2 +#define IRQ_S3CUART_RX3 IRQ_S5P_UART_RX3 + +/* VIC based IRQs */ + +#define S5P_IRQ_VIC0(x) (S5P_VIC0_BASE + (x)) +#define S5P_IRQ_VIC1(x) (S5P_VIC1_BASE + (x)) +#define S5P_IRQ_VIC2(x) (S5P_VIC2_BASE + (x)) +#define S5P_IRQ_VIC3(x) (S5P_VIC3_BASE + (x)) + +#define S5P_TIMER_IRQ(x) S5P_IRQ(11 + (x)) + +#define IRQ_TIMER0 S5P_TIMER_IRQ(0) +#define IRQ_TIMER1 S5P_TIMER_IRQ(1) +#define IRQ_TIMER2 S5P_TIMER_IRQ(2) +#define IRQ_TIMER3 S5P_TIMER_IRQ(3) +#define IRQ_TIMER4 S5P_TIMER_IRQ(4) + +#endif /* __ASM_PLAT_S5P_IRQS_H */ diff --git a/arch/arm/plat-s5p/include/plat/map-s5p.h b/arch/arm/plat-s5p/include/plat/map-s5p.h new file mode 100644 index 00000000000..14828521f70 --- /dev/null +++ b/arch/arm/plat-s5p/include/plat/map-s5p.h @@ -0,0 +1,34 @@ +/* linux/arch/arm/plat-s5p/include/plat/map-s5p.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P - Memory map definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_PLAT_MAP_S5P_H +#define __ASM_PLAT_MAP_S5P_H __FILE__ + +#define S5P_VA_CHIPID S3C_ADDR(0x00700000) +#define S5P_VA_GPIO S3C_ADDR(0x00500000) +#define S5P_VA_SYSTIMER S3C_ADDR(0x01200000) +#define S5P_VA_SROMC S3C_ADDR(0x01100000) + +#define S5P_VA_UART0 (S3C_VA_UART + 0x0) +#define S5P_VA_UART1 (S3C_VA_UART + 0x400) +#define S5P_VA_UART2 (S3C_VA_UART + 0x800) +#define S5P_VA_UART3 (S3C_VA_UART + 0xC00) + +#define S3C_UART_OFFSET (0x400) + +#define VA_VIC(x) (S3C_VA_IRQ + ((x) * 0x10000)) +#define VA_VIC0 VA_VIC(0) +#define VA_VIC1 VA_VIC(1) +#define VA_VIC2 VA_VIC(2) +#define VA_VIC3 VA_VIC(3) + +#endif /* __ASM_PLAT_MAP_S5P_H */ diff --git a/arch/arm/plat-s5p/include/plat/pll.h b/arch/arm/plat-s5p/include/plat/pll.h new file mode 100644 index 00000000000..d48325bb29e --- /dev/null +++ b/arch/arm/plat-s5p/include/plat/pll.h @@ -0,0 +1,83 @@ +/* arch/arm/plat-s5p/include/plat/pll.h + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P PLL code + * + * Based on arch/arm/plat-s3c64xx/include/plat/pll.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define PLL45XX_MDIV_MASK (0x3FF) +#define PLL45XX_PDIV_MASK (0x3F) +#define PLL45XX_SDIV_MASK (0x7) +#define PLL45XX_MDIV_SHIFT (16) +#define PLL45XX_PDIV_SHIFT (8) +#define PLL45XX_SDIV_SHIFT (0) + +#include <asm/div64.h> + +enum pll45xx_type_t { + pll_4500, + pll_4502, + pll_4508 +}; + +static inline unsigned long s5p_get_pll45xx(unsigned long baseclk, u32 pll_con, + enum pll45xx_type_t pll_type) +{ + u32 mdiv, pdiv, sdiv; + u64 fvco = baseclk; + + mdiv = (pll_con >> PLL45XX_MDIV_SHIFT) & PLL45XX_MDIV_MASK; + pdiv = (pll_con >> PLL45XX_PDIV_SHIFT) & PLL45XX_PDIV_MASK; + sdiv = (pll_con >> PLL45XX_SDIV_SHIFT) & PLL45XX_SDIV_MASK; + + if (pll_type == pll_4508) + sdiv = sdiv - 1; + + fvco *= mdiv; + do_div(fvco, (pdiv << sdiv)); + + return (unsigned long)fvco; +} + +#define PLL90XX_MDIV_MASK (0xFF) +#define PLL90XX_PDIV_MASK (0x3F) +#define PLL90XX_SDIV_MASK (0x7) +#define PLL90XX_KDIV_MASK (0xffff) +#define PLL90XX_MDIV_SHIFT (16) +#define PLL90XX_PDIV_SHIFT (8) +#define PLL90XX_SDIV_SHIFT (0) +#define PLL90XX_KDIV_SHIFT (0) + +static inline unsigned long s5p_get_pll90xx(unsigned long baseclk, + u32 pll_con, u32 pll_conk) +{ + unsigned long result; + u32 mdiv, pdiv, sdiv, kdiv; + u64 tmp; + + mdiv = (pll_con >> PLL90XX_MDIV_SHIFT) & PLL90XX_MDIV_MASK; + pdiv = (pll_con >> PLL90XX_PDIV_SHIFT) & PLL90XX_PDIV_MASK; + sdiv = (pll_con >> PLL90XX_SDIV_SHIFT) & PLL90XX_SDIV_MASK; + kdiv = pll_conk & PLL90XX_KDIV_MASK; + + /* We need to multiple baseclk by mdiv (the integer part) and kdiv + * which is in 2^16ths, so shift mdiv up (does not overflow) and + * add kdiv before multiplying. The use of tmp is to avoid any + * overflows before shifting bac down into result when multipling + * by the mdiv and kdiv pair. + */ + + tmp = baseclk; + tmp *= (mdiv << 16) + kdiv; + do_div(tmp, (pdiv << sdiv)); + result = tmp >> 16; + + return result; +} diff --git a/arch/arm/plat-s5p/include/plat/s5p-clock.h b/arch/arm/plat-s5p/include/plat/s5p-clock.h new file mode 100644 index 00000000000..56fb8b414d4 --- /dev/null +++ b/arch/arm/plat-s5p/include/plat/s5p-clock.h @@ -0,0 +1,40 @@ +/* linux/arch/arm/plat-s5p/include/plat/s5p-clock.h + * + * Copyright 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Header file for s5p clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_PLAT_S5P_CLOCK_H +#define __ASM_PLAT_S5P_CLOCK_H __FILE__ + +#include <linux/clk.h> + +#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1) + +#define clk_fin_apll clk_ext_xtal_mux +#define clk_fin_mpll clk_ext_xtal_mux +#define clk_fin_epll clk_ext_xtal_mux +#define clk_fin_vpll clk_ext_xtal_mux + +extern struct clk clk_ext_xtal_mux; +extern struct clk clk_48m; +extern struct clk clk_fout_apll; +extern struct clk clk_fout_mpll; +extern struct clk clk_fout_epll; +extern struct clk clk_arm; +extern struct clk clk_vpll; + +extern struct clksrc_sources clk_src_apll; +extern struct clksrc_sources clk_src_mpll; +extern struct clksrc_sources clk_src_epll; + +extern int s5p6440_clk48m_ctrl(struct clk *clk, int enable); +extern int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable); + +#endif /* __ASM_PLAT_S5P_CLOCK_H */ diff --git a/arch/arm/plat-s5p/include/plat/s5p6440.h b/arch/arm/plat-s5p/include/plat/s5p6440.h new file mode 100644 index 00000000000..a4cd75afeb3 --- /dev/null +++ b/arch/arm/plat-s5p/include/plat/s5p6440.h @@ -0,0 +1,37 @@ +/* arch/arm/plat-s5p/include/plat/s5p6440.h + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Header file for s5p6440 cpu support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + + /* Common init code for S5P6440 related SoCs */ + +extern void s5p6440_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); +extern void s5p6440_register_clocks(void); +extern void s5p6440_setup_clocks(void); + +#ifdef CONFIG_CPU_S5P6440 + +extern int s5p6440_init(void); +extern void s5p6440_init_irq(void); +extern void s5p6440_map_io(void); +extern void s5p6440_init_clocks(int xtal); + +#define s5p6440_init_uarts s5p6440_common_init_uarts + +#else +#define s5p6440_init_clocks NULL +#define s5p6440_init_uarts NULL +#define s5p6440_map_io NULL +#define s5p6440_init NULL +#endif + +/* S5P6440 timer */ + +extern struct sys_timer s5p6440_timer; diff --git a/arch/arm/plat-s5p/include/plat/s5p6442.h b/arch/arm/plat-s5p/include/plat/s5p6442.h new file mode 100644 index 00000000000..7b8801349c9 --- /dev/null +++ b/arch/arm/plat-s5p/include/plat/s5p6442.h @@ -0,0 +1,33 @@ +/* arch/arm/plat-s5p/include/plat/s5p6442.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Header file for s5p6442 cpu support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* Common init code for S5P6442 related SoCs */ + +extern void s5p6442_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); +extern void s5p6442_register_clocks(void); +extern void s5p6442_setup_clocks(void); + +#ifdef CONFIG_CPU_S5P6442 + +extern int s5p6442_init(void); +extern void s5p6442_init_irq(void); +extern void s5p6442_map_io(void); +extern void s5p6442_init_clocks(int xtal); + +#define s5p6442_init_uarts s5p6442_common_init_uarts + +#else +#define s5p6442_init_clocks NULL +#define s5p6442_init_uarts NULL +#define s5p6442_map_io NULL +#define s5p6442_init NULL +#endif diff --git a/arch/arm/plat-s5p/include/plat/s5pv210.h b/arch/arm/plat-s5p/include/plat/s5pv210.h new file mode 100644 index 00000000000..6c93a0c7810 --- /dev/null +++ b/arch/arm/plat-s5p/include/plat/s5pv210.h @@ -0,0 +1,33 @@ +/* linux/arch/arm/plat-s5p/include/plat/s5pv210.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Header file for s5pv210 cpu support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* Common init code for S5PV210 related SoCs */ + +extern void s5pv210_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); +extern void s5pv210_register_clocks(void); +extern void s5pv210_setup_clocks(void); + +#ifdef CONFIG_CPU_S5PV210 + +extern int s5pv210_init(void); +extern void s5pv210_init_irq(void); +extern void s5pv210_map_io(void); +extern void s5pv210_init_clocks(int xtal); + +#define s5pv210_init_uarts s5pv210_common_init_uarts + +#else +#define s5pv210_init_clocks NULL +#define s5pv210_init_uarts NULL +#define s5pv210_map_io NULL +#define s5pv210_init NULL +#endif diff --git a/arch/arm/plat-s5p/irq.c b/arch/arm/plat-s5p/irq.c new file mode 100644 index 00000000000..25e1eb6de59 --- /dev/null +++ b/arch/arm/plat-s5p/irq.c @@ -0,0 +1,72 @@ +/* arch/arm/plat-s5p/irq.c + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P - Interrupt handling + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/io.h> + +#include <asm/hardware/vic.h> + +#include <linux/serial_core.h> +#include <mach/map.h> +#include <plat/regs-timer.h> +#include <plat/regs-serial.h> +#include <plat/cpu.h> +#include <plat/irq-vic-timer.h> +#include <plat/irq-uart.h> + +/* + * Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3] + * are consecutive when looking up the interrupt in the demux routines. + */ +static struct s3c_uart_irq uart_irqs[] = { + [0] = { + .regs = S5P_VA_UART0, + .base_irq = IRQ_S5P_UART_BASE0, + .parent_irq = IRQ_UART0, + }, + [1] = { + .regs = S5P_VA_UART1, + .base_irq = IRQ_S5P_UART_BASE1, + .parent_irq = IRQ_UART1, + }, + [2] = { + .regs = S5P_VA_UART2, + .base_irq = IRQ_S5P_UART_BASE2, + .parent_irq = IRQ_UART2, + }, +#if CONFIG_SERIAL_SAMSUNG_UARTS > 3 + [3] = { + .regs = S5P_VA_UART3, + .base_irq = IRQ_S5P_UART_BASE3, + .parent_irq = IRQ_UART3, + }, +#endif +}; + +void __init s5p_init_irq(u32 *vic, u32 num_vic) +{ + int irq; + + /* initialize the VICs */ + for (irq = 0; irq < num_vic; irq++) + vic_init(VA_VIC(irq), VIC_BASE(irq), vic[irq], 0); + + s3c_init_vic_timer_irq(IRQ_TIMER0_VIC, IRQ_TIMER0); + s3c_init_vic_timer_irq(IRQ_TIMER1_VIC, IRQ_TIMER1); + s3c_init_vic_timer_irq(IRQ_TIMER2_VIC, IRQ_TIMER2); + s3c_init_vic_timer_irq(IRQ_TIMER3_VIC, IRQ_TIMER3); + s3c_init_vic_timer_irq(IRQ_TIMER4_VIC, IRQ_TIMER4); + + s3c_init_uart_irqs(uart_irqs, ARRAY_SIZE(uart_irqs)); +} diff --git a/arch/arm/plat-s5p/setup-i2c0.c b/arch/arm/plat-s5p/setup-i2c0.c new file mode 100644 index 00000000000..67a66e02a97 --- /dev/null +++ b/arch/arm/plat-s5p/setup-i2c0.c @@ -0,0 +1,25 @@ +/* linux/arch/arm/plat-s5p/setup-i2c0.c + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * I2C0 GPIO configuration. + * + * Based on plat-s3c64xx/setup-i2c0.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> + +struct platform_device; /* don't need the contents */ + +#include <plat/iic.h> + +void s3c_i2c0_cfg_gpio(struct platform_device *dev) +{ + /* Will be populated later */ +} diff --git a/arch/arm/plat-s5pc1xx/Kconfig b/arch/arm/plat-s5pc1xx/Kconfig index b7b9e91c024..c7ccdf22eef 100644 --- a/arch/arm/plat-s5pc1xx/Kconfig +++ b/arch/arm/plat-s5pc1xx/Kconfig @@ -11,6 +11,9 @@ config PLAT_S5PC1XX select ARM_VIC select NO_IOPORT select ARCH_REQUIRE_GPIOLIB + select SAMSUNG_CLKSRC + select SAMSUNG_IRQ_UART + select SAMSUNG_IRQ_VIC_TIMER select S3C_GPIO_TRACK select S3C_GPIO_PULL_UPDOWN select S3C_GPIO_CFG_S3C24XX diff --git a/arch/arm/plat-s5pc1xx/clock.c b/arch/arm/plat-s5pc1xx/clock.c index 26c21d84979..387f23190c3 100644 --- a/arch/arm/plat-s5pc1xx/clock.c +++ b/arch/arm/plat-s5pc1xx/clock.c @@ -64,25 +64,13 @@ struct clk clk_54m = { .rate = 54000000, }; -static int clk_default_setrate(struct clk *clk, unsigned long rate) -{ - clk->rate = rate; - return 0; -} - -static int clk_dummy_enable(struct clk *clk, int enable) -{ - return 0; -} - struct clk clk_hd0 = { .name = "hclkd0", .id = -1, .rate = 0, .parent = NULL, .ctrlbit = 0, - .set_rate = clk_default_setrate, - .enable = clk_dummy_enable, + .ops = &clk_ops_def_setrate, }; struct clk clk_pd0 = { @@ -91,8 +79,7 @@ struct clk clk_pd0 = { .rate = 0, .parent = NULL, .ctrlbit = 0, - .set_rate = clk_default_setrate, - .enable = clk_dummy_enable, + .ops = &clk_ops_def_setrate, }; static int s5pc1xx_clk_gate(void __iomem *reg, struct clk *clk, int enable) @@ -686,6 +673,8 @@ static struct clk s5pc100_init_clocks[] = { static struct clk *clks[] __initdata = { &clk_ext, &clk_epll, + &clk_pd0, + &clk_hd0, &clk_27m, &clk_48m, &clk_54m, @@ -700,16 +689,8 @@ void __init s5pc1xx_register_clocks(void) s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); - clkp = s5pc100_init_clocks; - size = ARRAY_SIZE(s5pc100_init_clocks); - - for (ptr = 0; ptr < size; ptr++, clkp++) { - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - } + s3c_register_clocks(s5pc100_init_clocks, + ARRAY_SIZE(s5pc100_init_clocks)); clkp = s5pc100_init_clocks_disable; size = ARRAY_SIZE(s5pc100_init_clocks_disable); diff --git a/arch/arm/plat-s5pc1xx/dev-uart.c b/arch/arm/plat-s5pc1xx/dev-uart.c index f749bc5407b..586c95c60bf 100644 --- a/arch/arm/plat-s5pc1xx/dev-uart.c +++ b/arch/arm/plat-s5pc1xx/dev-uart.c @@ -143,32 +143,3 @@ struct s3c24xx_uart_resources s5pc1xx_uart_resources[] __initdata = { .nr_resources = ARRAY_SIZE(s5pc1xx_uart3_resource), }, }; - -/* uart devices */ - -static struct platform_device s3c24xx_uart_device0 = { - .id = 0, -}; - -static struct platform_device s3c24xx_uart_device1 = { - .id = 1, -}; - -static struct platform_device s3c24xx_uart_device2 = { - .id = 2, -}; - -static struct platform_device s3c24xx_uart_device3 = { - .id = 3, -}; - -struct platform_device *s3c24xx_uart_src[4] = { - &s3c24xx_uart_device0, - &s3c24xx_uart_device1, - &s3c24xx_uart_device2, - &s3c24xx_uart_device3, -}; - -struct platform_device *s3c24xx_uart_devs[4] = { -}; - diff --git a/arch/arm/plat-s5pc1xx/gpio-config.c b/arch/arm/plat-s5pc1xx/gpio-config.c index bba675df9c7..a4f67e80a15 100644 --- a/arch/arm/plat-s5pc1xx/gpio-config.c +++ b/arch/arm/plat-s5pc1xx/gpio-config.c @@ -16,7 +16,7 @@ #include <linux/gpio.h> #include <linux/io.h> -#include <mach/gpio-core.h> +#include <plat/gpio-core.h> #include <plat/gpio-cfg-s5pc1xx.h> s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin, unsigned int off) diff --git a/arch/arm/plat-s5pc1xx/gpiolib.c b/arch/arm/plat-s5pc1xx/gpiolib.c index facb410e7a7..1ffc57ac293 100644 --- a/arch/arm/plat-s5pc1xx/gpiolib.c +++ b/arch/arm/plat-s5pc1xx/gpiolib.c @@ -17,8 +17,8 @@ #include <linux/gpio.h> #include <mach/map.h> -#include <mach/gpio-core.h> +#include <plat/gpio-core.h> #include <plat/gpio-cfg.h> #include <plat/gpio-cfg-helpers.h> #include <plat/regs-gpio.h> diff --git a/arch/arm/plat-s5pc1xx/include/plat/irqs.h b/arch/arm/plat-s5pc1xx/include/plat/irqs.h index ef8736366f0..409c804315e 100644 --- a/arch/arm/plat-s5pc1xx/include/plat/irqs.h +++ b/arch/arm/plat-s5pc1xx/include/plat/irqs.h @@ -88,11 +88,11 @@ #define IRQ_MDMA S5PC1XX_IRQ_VIC0(18) #define IRQ_PDMA0 S5PC1XX_IRQ_VIC0(19) #define IRQ_PDMA1 S5PC1XX_IRQ_VIC0(20) -#define IRQ_TIMER0 S5PC1XX_IRQ_VIC0(21) -#define IRQ_TIMER1 S5PC1XX_IRQ_VIC0(22) -#define IRQ_TIMER2 S5PC1XX_IRQ_VIC0(23) -#define IRQ_TIMER3 S5PC1XX_IRQ_VIC0(24) -#define IRQ_TIMER4 S5PC1XX_IRQ_VIC0(25) +#define IRQ_TIMER0_VIC S5PC1XX_IRQ_VIC0(21) +#define IRQ_TIMER1_VIC S5PC1XX_IRQ_VIC0(22) +#define IRQ_TIMER2_VIC S5PC1XX_IRQ_VIC0(23) +#define IRQ_TIMER3_VIC S5PC1XX_IRQ_VIC0(24) +#define IRQ_TIMER4_VIC S5PC1XX_IRQ_VIC0(25) #define IRQ_SYSTIMER S5PC1XX_IRQ_VIC0(26) #define IRQ_WDT S5PC1XX_IRQ_VIC0(27) #define IRQ_RTC_ALARM S5PC1XX_IRQ_VIC0(28) @@ -171,8 +171,15 @@ #define IRQ_SDMIRQ S5PC1XX_IRQ_VIC2(30) #define IRQ_SDMFIQ S5PC1XX_IRQ_VIC2(31) +#define IRQ_TIMER(x) (IRQ_SDMFIQ + 1 + (x)) +#define IRQ_TIMER0 IRQ_TIMER(0) +#define IRQ_TIMER1 IRQ_TIMER(1) +#define IRQ_TIMER2 IRQ_TIMER(2) +#define IRQ_TIMER3 IRQ_TIMER(3) +#define IRQ_TIMER4 IRQ_TIMER(4) + /* External interrupt */ -#define S3C_IRQ_EINT_BASE (IRQ_SDMFIQ + 1) +#define S3C_IRQ_EINT_BASE (IRQ_SDMFIQ + 6) #define S3C_EINT(x) (S3C_IRQ_EINT_BASE + (x - 16)) #define IRQ_EINT(x) (x < 16 ? IRQ_EINT0 + x : S3C_EINT(x)) diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h index c5cc86e92d6..24dec4e5253 100644 --- a/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h +++ b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h @@ -61,73 +61,10 @@ #define S5PC100_EPLL_MASK 0xffffffff #define S5PC100_EPLLVAL(_m, _p, _s) ((_m) << 16 | ((_p) << 8) | ((_s))) -/* CLKSRC0 */ -#define S5PC100_CLKSRC0_APLL_MASK (0x1<<0) -#define S5PC100_CLKSRC0_APLL_SHIFT (0) -#define S5PC100_CLKSRC0_MPLL_MASK (0x1<<4) -#define S5PC100_CLKSRC0_MPLL_SHIFT (4) -#define S5PC100_CLKSRC0_EPLL_MASK (0x1<<8) -#define S5PC100_CLKSRC0_EPLL_SHIFT (8) -#define S5PC100_CLKSRC0_HPLL_MASK (0x1<<12) -#define S5PC100_CLKSRC0_HPLL_SHIFT (12) -#define S5PC100_CLKSRC0_AMMUX_MASK (0x1<<16) -#define S5PC100_CLKSRC0_AMMUX_SHIFT (16) -#define S5PC100_CLKSRC0_HREF_MASK (0x1<<20) -#define S5PC100_CLKSRC0_HREF_SHIFT (20) -#define S5PC100_CLKSRC0_ONENAND_MASK (0x1<<24) -#define S5PC100_CLKSRC0_ONENAND_SHIFT (24) - - -/* CLKSRC1 */ -#define S5PC100_CLKSRC1_UART_MASK (0x1<<0) -#define S5PC100_CLKSRC1_UART_SHIFT (0) -#define S5PC100_CLKSRC1_SPI0_MASK (0x3<<4) -#define S5PC100_CLKSRC1_SPI0_SHIFT (4) -#define S5PC100_CLKSRC1_SPI1_MASK (0x3<<8) -#define S5PC100_CLKSRC1_SPI1_SHIFT (8) -#define S5PC100_CLKSRC1_SPI2_MASK (0x3<<12) -#define S5PC100_CLKSRC1_SPI2_SHIFT (12) -#define S5PC100_CLKSRC1_IRDA_MASK (0x3<<16) -#define S5PC100_CLKSRC1_IRDA_SHIFT (16) -#define S5PC100_CLKSRC1_UHOST_MASK (0x3<<20) -#define S5PC100_CLKSRC1_UHOST_SHIFT (20) -#define S5PC100_CLKSRC1_CLK48M_MASK (0x1<<24) +/* CLKSRC0..CLKSRC3 -> mostly removed due to clksrc updates */ +#define S5PC100_CLKSRC1_CLK48M_MASK (0x1<<24) #define S5PC100_CLKSRC1_CLK48M_SHIFT (24) -/* CLKSRC2 */ -#define S5PC100_CLKSRC2_MMC0_MASK (0x3<<0) -#define S5PC100_CLKSRC2_MMC0_SHIFT (0) -#define S5PC100_CLKSRC2_MMC1_MASK (0x3<<4) -#define S5PC100_CLKSRC2_MMC1_SHIFT (4) -#define S5PC100_CLKSRC2_MMC2_MASK (0x3<<8) -#define S5PC100_CLKSRC2_MMC2_SHIFT (8) -#define S5PC100_CLKSRC2_LCD_MASK (0x3<<12) -#define S5PC100_CLKSRC2_LCD_SHIFT (12) -#define S5PC100_CLKSRC2_FIMC0_MASK (0x3<<16) -#define S5PC100_CLKSRC2_FIMC0_SHIFT (16) -#define S5PC100_CLKSRC2_FIMC1_MASK (0x3<<20) -#define S5PC100_CLKSRC2_FIMC1_SHIFT (20) -#define S5PC100_CLKSRC2_FIMC2_MASK (0x3<<24) -#define S5PC100_CLKSRC2_FIMC2_SHIFT (24) -#define S5PC100_CLKSRC2_MIXER_MASK (0x3<<28) -#define S5PC100_CLKSRC2_MIXER_SHIFT (28) - -/* CLKSRC3 */ -#define S5PC100_CLKSRC3_PWI_MASK (0x3<<0) -#define S5PC100_CLKSRC3_PWI_SHIFT (0) -#define S5PC100_CLKSRC3_HCLKD2_MASK (0x1<<4) -#define S5PC100_CLKSRC3_HCLKD2_SHIFT (4) -#define S5PC100_CLKSRC3_I2SD2_MASK (0x3<<8) -#define S5PC100_CLKSRC3_I2SD2_SHIFT (8) -#define S5PC100_CLKSRC3_AUDIO0_MASK (0x7<<12) -#define S5PC100_CLKSRC3_AUDIO0_SHIFT (12) -#define S5PC100_CLKSRC3_AUDIO1_MASK (0x7<<16) -#define S5PC100_CLKSRC3_AUDIO1_SHIFT (16) -#define S5PC100_CLKSRC3_AUDIO2_MASK (0x7<<20) -#define S5PC100_CLKSRC3_AUDIO2_SHIFT (20) -#define S5PC100_CLKSRC3_SPDIF_MASK (0x3<<24) -#define S5PC100_CLKSRC3_SPDIF_SHIFT (24) - /* CLKDIV0 */ #define S5PC100_CLKDIV0_APLL_MASK (0x1<<0) #define S5PC100_CLKDIV0_APLL_SHIFT (0) @@ -140,7 +77,7 @@ #define S5PC100_CLKDIV0_SECSS_MASK (0x7<<16) #define S5PC100_CLKDIV0_SECSS_SHIFT (16) -/* CLKDIV1 */ +/* CLKDIV1 (OneNAND clock only used in one place, removed) */ #define S5PC100_CLKDIV1_APLL2_MASK (0x7<<0) #define S5PC100_CLKDIV1_APLL2_SHIFT (0) #define S5PC100_CLKDIV1_MPLL_MASK (0x3<<4) @@ -151,56 +88,12 @@ #define S5PC100_CLKDIV1_D1_SHIFT (12) #define S5PC100_CLKDIV1_PCLKD1_MASK (0x7<<16) #define S5PC100_CLKDIV1_PCLKD1_SHIFT (16) -#define S5PC100_CLKDIV1_ONENAND_MASK (0x3<<20) -#define S5PC100_CLKDIV1_ONENAND_SHIFT (20) #define S5PC100_CLKDIV1_CAM_MASK (0x1F<<24) #define S5PC100_CLKDIV1_CAM_SHIFT (24) -/* CLKDIV2 */ -#define S5PC100_CLKDIV2_UART_MASK (0x7<<0) -#define S5PC100_CLKDIV2_UART_SHIFT (0) -#define S5PC100_CLKDIV2_SPI0_MASK (0xf<<4) -#define S5PC100_CLKDIV2_SPI0_SHIFT (4) -#define S5PC100_CLKDIV2_SPI1_MASK (0xf<<8) -#define S5PC100_CLKDIV2_SPI1_SHIFT (8) -#define S5PC100_CLKDIV2_SPI2_MASK (0xf<<12) -#define S5PC100_CLKDIV2_SPI2_SHIFT (12) -#define S5PC100_CLKDIV2_IRDA_MASK (0xf<<16) -#define S5PC100_CLKDIV2_IRDA_SHIFT (16) -#define S5PC100_CLKDIV2_UHOST_MASK (0xf<<20) -#define S5PC100_CLKDIV2_UHOST_SHIFT (20) - -/* CLKDIV3 */ -#define S5PC100_CLKDIV3_MMC0_MASK (0xf<<0) -#define S5PC100_CLKDIV3_MMC0_SHIFT (0) -#define S5PC100_CLKDIV3_MMC1_MASK (0xf<<4) -#define S5PC100_CLKDIV3_MMC1_SHIFT (4) -#define S5PC100_CLKDIV3_MMC2_MASK (0xf<<8) -#define S5PC100_CLKDIV3_MMC2_SHIFT (8) -#define S5PC100_CLKDIV3_LCD_MASK (0xf<<12) -#define S5PC100_CLKDIV3_LCD_SHIFT (12) -#define S5PC100_CLKDIV3_FIMC0_MASK (0xf<<16) -#define S5PC100_CLKDIV3_FIMC0_SHIFT (16) -#define S5PC100_CLKDIV3_FIMC1_MASK (0xf<<20) -#define S5PC100_CLKDIV3_FIMC1_SHIFT (20) -#define S5PC100_CLKDIV3_FIMC2_MASK (0xf<<24) -#define S5PC100_CLKDIV3_FIMC2_SHIFT (24) -#define S5PC100_CLKDIV3_HDMI_MASK (0xf<<28) -#define S5PC100_CLKDIV3_HDMI_SHIFT (28) - -/* CLKDIV4 */ -#define S5PC100_CLKDIV4_PWI_MASK (0x7<<0) -#define S5PC100_CLKDIV4_PWI_SHIFT (0) -#define S5PC100_CLKDIV4_HCLKD2_MASK (0x7<<4) -#define S5PC100_CLKDIV4_HCLKD2_SHIFT (4) -#define S5PC100_CLKDIV4_I2SD2_MASK (0xf<<8) -#define S5PC100_CLKDIV4_I2SD2_SHIFT (8) -#define S5PC100_CLKDIV4_AUDIO0_MASK (0xf<<12) -#define S5PC100_CLKDIV4_AUDIO0_SHIFT (12) -#define S5PC100_CLKDIV4_AUDIO1_MASK (0xf<<16) -#define S5PC100_CLKDIV4_AUDIO1_SHIFT (16) -#define S5PC100_CLKDIV4_AUDIO2_MASK (0xf<<20) -#define S5PC100_CLKDIV4_AUDIO2_SHIFT (20) +/* CLKDIV2 => removed in clksrc update */ +/* CLKDIV3 => removed in clksrc update, or not needed */ +/* CLKDIV4 => removed in clksrc update, or not needed */ /* HCLKD0/PCLKD0 Clock Gate 0 Registers */ #define S5PC100_CLKGATE_D00_INTC (1<<0) diff --git a/arch/arm/plat-s5pc1xx/irq.c b/arch/arm/plat-s5pc1xx/irq.c index e44fd04ef33..bfc52482781 100644 --- a/arch/arm/plat-s5pc1xx/irq.c +++ b/arch/arm/plat-s5pc1xx/irq.c @@ -20,87 +20,14 @@ #include <asm/hardware/vic.h> #include <mach/map.h> -#include <plat/regs-timer.h> +#include <plat/irq-vic-timer.h> +#include <plat/irq-uart.h> #include <plat/cpu.h> -/* Timer interrupt handling */ - -static void s3c_irq_demux_timer(unsigned int base_irq, unsigned int sub_irq) -{ - generic_handle_irq(sub_irq); -} - -static void s3c_irq_demux_timer0(unsigned int irq, struct irq_desc *desc) -{ - s3c_irq_demux_timer(irq, IRQ_TIMER0); -} - -static void s3c_irq_demux_timer1(unsigned int irq, struct irq_desc *desc) -{ - s3c_irq_demux_timer(irq, IRQ_TIMER1); -} - -static void s3c_irq_demux_timer2(unsigned int irq, struct irq_desc *desc) -{ - s3c_irq_demux_timer(irq, IRQ_TIMER2); -} - -static void s3c_irq_demux_timer3(unsigned int irq, struct irq_desc *desc) -{ - s3c_irq_demux_timer(irq, IRQ_TIMER3); -} - -static void s3c_irq_demux_timer4(unsigned int irq, struct irq_desc *desc) -{ - s3c_irq_demux_timer(irq, IRQ_TIMER4); -} - -/* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */ - -static void s3c_irq_timer_mask(unsigned int irq) -{ - u32 reg = __raw_readl(S3C64XX_TINT_CSTAT); - - reg &= 0x1f; /* mask out pending interrupts */ - reg &= ~(1 << (irq - IRQ_TIMER0)); - __raw_writel(reg, S3C64XX_TINT_CSTAT); -} - -static void s3c_irq_timer_unmask(unsigned int irq) -{ - u32 reg = __raw_readl(S3C64XX_TINT_CSTAT); - - reg &= 0x1f; /* mask out pending interrupts */ - reg |= 1 << (irq - IRQ_TIMER0); - __raw_writel(reg, S3C64XX_TINT_CSTAT); -} - -static void s3c_irq_timer_ack(unsigned int irq) -{ - u32 reg = __raw_readl(S3C64XX_TINT_CSTAT); - - reg &= 0x1f; /* mask out pending interrupts */ - reg |= (1 << 5) << (irq - IRQ_TIMER0); - __raw_writel(reg, S3C64XX_TINT_CSTAT); -} - -static struct irq_chip s3c_irq_timer = { - .name = "s3c-timer", - .mask = s3c_irq_timer_mask, - .unmask = s3c_irq_timer_unmask, - .ack = s3c_irq_timer_ack, -}; - -struct uart_irq { - void __iomem *regs; - unsigned int base_irq; - unsigned int parent_irq; -}; - /* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3] * are consecutive when looking up the interrupt in the demux routines. */ -static struct uart_irq uart_irqs[] = { +static struct s3c_uart_irq uart_irqs[] = { [0] = { .regs = (void *)S3C_VA_UART0, .base_irq = IRQ_S3CUART_BASE0, @@ -123,113 +50,9 @@ static struct uart_irq uart_irqs[] = { }, }; -static inline void __iomem *s3c_irq_uart_base(unsigned int irq) -{ - struct uart_irq *uirq = get_irq_chip_data(irq); - return uirq->regs; -} - -static inline unsigned int s3c_irq_uart_bit(unsigned int irq) -{ - return irq & 3; -} - -/* UART interrupt registers, not worth adding to seperate include header */ -#define S3C64XX_UINTP 0x30 -#define S3C64XX_UINTSP 0x34 -#define S3C64XX_UINTM 0x38 - -static void s3c_irq_uart_mask(unsigned int irq) -{ - void __iomem *regs = s3c_irq_uart_base(irq); - unsigned int bit = s3c_irq_uart_bit(irq); - u32 reg; - - reg = __raw_readl(regs + S3C64XX_UINTM); - reg |= (1 << bit); - __raw_writel(reg, regs + S3C64XX_UINTM); -} - -static void s3c_irq_uart_maskack(unsigned int irq) -{ - void __iomem *regs = s3c_irq_uart_base(irq); - unsigned int bit = s3c_irq_uart_bit(irq); - u32 reg; - - reg = __raw_readl(regs + S3C64XX_UINTM); - reg |= (1 << bit); - __raw_writel(reg, regs + S3C64XX_UINTM); - __raw_writel(1 << bit, regs + S3C64XX_UINTP); -} - -static void s3c_irq_uart_unmask(unsigned int irq) -{ - void __iomem *regs = s3c_irq_uart_base(irq); - unsigned int bit = s3c_irq_uart_bit(irq); - u32 reg; - - reg = __raw_readl(regs + S3C64XX_UINTM); - reg &= ~(1 << bit); - __raw_writel(reg, regs + S3C64XX_UINTM); -} - -static void s3c_irq_uart_ack(unsigned int irq) -{ - void __iomem *regs = s3c_irq_uart_base(irq); - unsigned int bit = s3c_irq_uart_bit(irq); - - __raw_writel(1 << bit, regs + S3C64XX_UINTP); -} - -static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc) -{ - struct uart_irq *uirq = &uart_irqs[irq - IRQ_UART0]; - u32 pend = __raw_readl(uirq->regs + S3C64XX_UINTP); - int base = uirq->base_irq; - - if (pend & (1 << 0)) - generic_handle_irq(base); - if (pend & (1 << 1)) - generic_handle_irq(base + 1); - if (pend & (1 << 2)) - generic_handle_irq(base + 2); - if (pend & (1 << 3)) - generic_handle_irq(base + 3); -} - -static struct irq_chip s3c_irq_uart = { - .name = "s3c-uart", - .mask = s3c_irq_uart_mask, - .unmask = s3c_irq_uart_unmask, - .mask_ack = s3c_irq_uart_maskack, - .ack = s3c_irq_uart_ack, -}; - -static void __init s5pc1xx_uart_irq(struct uart_irq *uirq) -{ - void __iomem *reg_base = uirq->regs; - unsigned int irq; - int offs; - - /* mask all interrupts at the start. */ - __raw_writel(0xf, reg_base + S3C64XX_UINTM); - - for (offs = 0; offs < 3; offs++) { - irq = uirq->base_irq + offs; - - set_irq_chip(irq, &s3c_irq_uart); - set_irq_chip_data(irq, uirq); - set_irq_handler(irq, handle_level_irq); - set_irq_flags(irq, IRQF_VALID); - } - - set_irq_chained_handler(uirq->parent_irq, s3c_irq_demux_uart); -} - void __init s5pc1xx_init_irq(u32 *vic_valid, int num) { int i; - int uart, irq; printk(KERN_DEBUG "%s: initialising interrupts\n", __func__); @@ -240,20 +63,13 @@ void __init s5pc1xx_init_irq(u32 *vic_valid, int num) /* add the timer sub-irqs */ - set_irq_chained_handler(IRQ_TIMER0, s3c_irq_demux_timer0); - set_irq_chained_handler(IRQ_TIMER1, s3c_irq_demux_timer1); - set_irq_chained_handler(IRQ_TIMER2, s3c_irq_demux_timer2); - set_irq_chained_handler(IRQ_TIMER3, s3c_irq_demux_timer3); - set_irq_chained_handler(IRQ_TIMER4, s3c_irq_demux_timer4); - - for (irq = IRQ_TIMER0; irq <= IRQ_TIMER4; irq++) { - set_irq_chip(irq, &s3c_irq_timer); - set_irq_handler(irq, handle_level_irq); - set_irq_flags(irq, IRQF_VALID); - } + s3c_init_vic_timer_irq(IRQ_TIMER0_VIC, IRQ_TIMER0); + s3c_init_vic_timer_irq(IRQ_TIMER1_VIC, IRQ_TIMER1); + s3c_init_vic_timer_irq(IRQ_TIMER2_VIC, IRQ_TIMER2); + s3c_init_vic_timer_irq(IRQ_TIMER3_VIC, IRQ_TIMER3); + s3c_init_vic_timer_irq(IRQ_TIMER4_VIC, IRQ_TIMER4); - for (uart = 0; uart < ARRAY_SIZE(uart_irqs); uart++) - s5pc1xx_uart_irq(&uart_irqs[uart]); + s3c_init_uart_irqs(uart_irqs, ARRAY_SIZE(uart_irqs)); } diff --git a/arch/arm/plat-s5pc1xx/s5pc100-clock.c b/arch/arm/plat-s5pc1xx/s5pc100-clock.c index b436d44510c..2bf6c57a96a 100644 --- a/arch/arm/plat-s5pc1xx/s5pc100-clock.c +++ b/arch/arm/plat-s5pc1xx/s5pc100-clock.c @@ -29,6 +29,7 @@ #include <plat/regs-clock.h> #include <plat/clock.h> +#include <plat/clock-clksrc.h> #include <plat/cpu.h> #include <plat/pll.h> #include <plat/devs.h> @@ -51,23 +52,6 @@ static struct clk clk_ext_xtal_mux = { #define clk_fout_mpll clk_mpll #define clk_vclk_54m clk_54m -struct clk_sources { - unsigned int nr_sources; - struct clk **sources; -}; - -struct clksrc_clk { - struct clk clk; - unsigned int mask; - unsigned int shift; - - struct clk_sources *sources; - - unsigned int divider_shift; - void __iomem *reg_divider; - void __iomem *reg_source; -}; - /* APLL */ static struct clk clk_fout_apll = { .name = "fout_apll", @@ -80,7 +64,7 @@ static struct clk *clk_src_apll_list[] = { [1] = &clk_fout_apll, }; -static struct clk_sources clk_src_apll = { +static struct clksrc_sources clk_src_apll = { .sources = clk_src_apll_list, .nr_sources = ARRAY_SIZE(clk_src_apll_list), }; @@ -90,10 +74,8 @@ static struct clksrc_clk clk_mout_apll = { .name = "mout_apll", .id = -1, }, - .shift = S5PC100_CLKSRC0_APLL_SHIFT, - .mask = S5PC100_CLKSRC0_APLL_MASK, .sources = &clk_src_apll, - .reg_source = S5PC100_CLKSRC0, + .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 0, .size = 1, }, }; static unsigned long s5pc100_clk_dout_apll_get_rate(struct clk *clk) @@ -111,7 +93,9 @@ static struct clk clk_dout_apll = { .name = "dout_apll", .id = -1, .parent = &clk_mout_apll.clk, - .get_rate = s5pc100_clk_dout_apll_get_rate, + .ops = &(struct clk_ops) { + .get_rate = s5pc100_clk_dout_apll_get_rate, + }, }; static unsigned long s5pc100_clk_arm_get_rate(struct clk *clk) @@ -165,9 +149,11 @@ static struct clk clk_arm = { .name = "armclk", .id = -1, .parent = &clk_dout_apll, - .get_rate = s5pc100_clk_arm_get_rate, - .set_rate = s5pc100_clk_arm_set_rate, - .round_rate = s5pc100_clk_arm_round_rate, + .ops = &(struct clk_ops) { + .get_rate = s5pc100_clk_arm_get_rate, + .set_rate = s5pc100_clk_arm_set_rate, + .round_rate = s5pc100_clk_arm_round_rate, + }, }; static unsigned long s5pc100_clk_dout_d0_bus_get_rate(struct clk *clk) @@ -185,7 +171,9 @@ static struct clk clk_dout_d0_bus = { .name = "dout_d0_bus", .id = -1, .parent = &clk_arm, - .get_rate = s5pc100_clk_dout_d0_bus_get_rate, + .ops = &(struct clk_ops) { + .get_rate = s5pc100_clk_dout_d0_bus_get_rate, + }, }; static unsigned long s5pc100_clk_dout_pclkd0_get_rate(struct clk *clk) @@ -203,7 +191,9 @@ static struct clk clk_dout_pclkd0 = { .name = "dout_pclkd0", .id = -1, .parent = &clk_dout_d0_bus, - .get_rate = s5pc100_clk_dout_pclkd0_get_rate, + .ops = &(struct clk_ops) { + .get_rate = s5pc100_clk_dout_pclkd0_get_rate, + }, }; static unsigned long s5pc100_clk_dout_apll2_get_rate(struct clk *clk) @@ -221,7 +211,9 @@ static struct clk clk_dout_apll2 = { .name = "dout_apll2", .id = -1, .parent = &clk_mout_apll.clk, - .get_rate = s5pc100_clk_dout_apll2_get_rate, + .ops = &(struct clk_ops) { + .get_rate = s5pc100_clk_dout_apll2_get_rate, + }, }; /* MPLL */ @@ -230,7 +222,7 @@ static struct clk *clk_src_mpll_list[] = { [1] = &clk_fout_mpll, }; -static struct clk_sources clk_src_mpll = { +static struct clksrc_sources clk_src_mpll = { .sources = clk_src_mpll_list, .nr_sources = ARRAY_SIZE(clk_src_mpll_list), }; @@ -240,10 +232,8 @@ static struct clksrc_clk clk_mout_mpll = { .name = "mout_mpll", .id = -1, }, - .shift = S5PC100_CLKSRC0_MPLL_SHIFT, - .mask = S5PC100_CLKSRC0_MPLL_MASK, .sources = &clk_src_mpll, - .reg_source = S5PC100_CLKSRC0, + .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 4, .size = 1, }, }; static struct clk *clkset_am_list[] = { @@ -251,7 +241,7 @@ static struct clk *clkset_am_list[] = { [1] = &clk_dout_apll2, }; -static struct clk_sources clk_src_am = { +static struct clksrc_sources clk_src_am = { .sources = clkset_am_list, .nr_sources = ARRAY_SIZE(clkset_am_list), }; @@ -261,10 +251,8 @@ static struct clksrc_clk clk_mout_am = { .name = "mout_am", .id = -1, }, - .shift = S5PC100_CLKSRC0_AMMUX_SHIFT, - .mask = S5PC100_CLKSRC0_AMMUX_MASK, .sources = &clk_src_am, - .reg_source = S5PC100_CLKSRC0, + .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 16, .size = 1, }, }; static unsigned long s5pc100_clk_dout_d1_bus_get_rate(struct clk *clk) @@ -284,7 +272,9 @@ static struct clk clk_dout_d1_bus = { .name = "dout_d1_bus", .id = -1, .parent = &clk_mout_am.clk, - .get_rate = s5pc100_clk_dout_d1_bus_get_rate, + .ops = &(struct clk_ops) { + .get_rate = s5pc100_clk_dout_d1_bus_get_rate, + }, }; static struct clk *clkset_onenand_list[] = { @@ -292,7 +282,7 @@ static struct clk *clkset_onenand_list[] = { [1] = &clk_dout_d1_bus, }; -static struct clk_sources clk_src_onenand = { +static struct clksrc_sources clk_src_onenand = { .sources = clkset_onenand_list, .nr_sources = ARRAY_SIZE(clkset_onenand_list), }; @@ -302,10 +292,8 @@ static struct clksrc_clk clk_mout_onenand = { .name = "mout_onenand", .id = -1, }, - .shift = S5PC100_CLKSRC0_ONENAND_SHIFT, - .mask = S5PC100_CLKSRC0_ONENAND_MASK, .sources = &clk_src_onenand, - .reg_source = S5PC100_CLKSRC0, + .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 24, .size = 1, }, }; static unsigned long s5pc100_clk_dout_pclkd1_get_rate(struct clk *clk) @@ -325,7 +313,9 @@ static struct clk clk_dout_pclkd1 = { .name = "dout_pclkd1", .id = -1, .parent = &clk_dout_d1_bus, - .get_rate = s5pc100_clk_dout_pclkd1_get_rate, + .ops = &(struct clk_ops) { + .get_rate = s5pc100_clk_dout_pclkd1_get_rate, + }, }; static unsigned long s5pc100_clk_dout_mpll2_get_rate(struct clk *clk) @@ -345,7 +335,9 @@ static struct clk clk_dout_mpll2 = { .name = "dout_mpll2", .id = -1, .parent = &clk_mout_am.clk, - .get_rate = s5pc100_clk_dout_mpll2_get_rate, + .ops = &(struct clk_ops) { + .get_rate = s5pc100_clk_dout_mpll2_get_rate, + }, }; static unsigned long s5pc100_clk_dout_cam_get_rate(struct clk *clk) @@ -365,7 +357,9 @@ static struct clk clk_dout_cam = { .name = "dout_cam", .id = -1, .parent = &clk_dout_mpll2, - .get_rate = s5pc100_clk_dout_cam_get_rate, + .ops = &(struct clk_ops) { + .get_rate = s5pc100_clk_dout_cam_get_rate, + }, }; static unsigned long s5pc100_clk_dout_mpll_get_rate(struct clk *clk) @@ -385,7 +379,9 @@ static struct clk clk_dout_mpll = { .name = "dout_mpll", .id = -1, .parent = &clk_mout_am.clk, - .get_rate = s5pc100_clk_dout_mpll_get_rate, + .ops = &(struct clk_ops) { + .get_rate = s5pc100_clk_dout_mpll_get_rate, + }, }; /* EPLL */ @@ -399,7 +395,7 @@ static struct clk *clk_src_epll_list[] = { [1] = &clk_fout_epll, }; -static struct clk_sources clk_src_epll = { +static struct clksrc_sources clk_src_epll = { .sources = clk_src_epll_list, .nr_sources = ARRAY_SIZE(clk_src_epll_list), }; @@ -409,10 +405,8 @@ static struct clksrc_clk clk_mout_epll = { .name = "mout_epll", .id = -1, }, - .shift = S5PC100_CLKSRC0_EPLL_SHIFT, - .mask = S5PC100_CLKSRC0_EPLL_MASK, - .sources = &clk_src_epll, - .reg_source = S5PC100_CLKSRC0, + .sources = &clk_src_epll, + .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 8, .size = 1, }, }; /* HPLL */ @@ -426,7 +420,7 @@ static struct clk *clk_src_hpll_list[] = { [1] = &clk_fout_hpll, }; -static struct clk_sources clk_src_hpll = { +static struct clksrc_sources clk_src_hpll = { .sources = clk_src_hpll_list, .nr_sources = ARRAY_SIZE(clk_src_hpll_list), }; @@ -436,10 +430,8 @@ static struct clksrc_clk clk_mout_hpll = { .name = "mout_hpll", .id = -1, }, - .shift = S5PC100_CLKSRC0_HPLL_SHIFT, - .mask = S5PC100_CLKSRC0_HPLL_MASK, - .sources = &clk_src_hpll, - .reg_source = S5PC100_CLKSRC0, + .sources = &clk_src_hpll, + .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 12, .size = 1, }, }; /* Peripherals */ @@ -454,190 +446,6 @@ static struct clksrc_clk clk_mout_hpll = { * have a common parent divisor so are not included here. */ -static inline struct clksrc_clk *to_clksrc(struct clk *clk) -{ - return container_of(clk, struct clksrc_clk, clk); -} - -static unsigned long s5pc100_getrate_clksrc(struct clk *clk) -{ - struct clksrc_clk *sclk = to_clksrc(clk); - unsigned long rate = clk_get_rate(clk->parent); - u32 clkdiv = __raw_readl(sclk->reg_divider); - - clkdiv >>= sclk->divider_shift; - clkdiv &= 0xf; - clkdiv++; - - rate /= clkdiv; - return rate; -} - -static int s5pc100_setrate_clksrc(struct clk *clk, unsigned long rate) -{ - struct clksrc_clk *sclk = to_clksrc(clk); - void __iomem *reg = sclk->reg_divider; - unsigned int div; - u32 val; - - rate = clk_round_rate(clk, rate); - div = clk_get_rate(clk->parent) / rate; - if (div > 16) - return -EINVAL; - - val = __raw_readl(reg); - val &= ~(0xf << sclk->divider_shift); - val |= (div - 1) << sclk->divider_shift; - __raw_writel(val, reg); - - return 0; -} - -static int s5pc100_setparent_clksrc(struct clk *clk, struct clk *parent) -{ - struct clksrc_clk *sclk = to_clksrc(clk); - struct clk_sources *srcs = sclk->sources; - u32 clksrc = __raw_readl(sclk->reg_source); - int src_nr = -1; - int ptr; - - for (ptr = 0; ptr < srcs->nr_sources; ptr++) - if (srcs->sources[ptr] == parent) { - src_nr = ptr; - break; - } - - if (src_nr >= 0) { - clksrc &= ~sclk->mask; - clksrc |= src_nr << sclk->shift; - - __raw_writel(clksrc, sclk->reg_source); - return 0; - } - - return -EINVAL; -} - -static unsigned long s5pc100_roundrate_clksrc(struct clk *clk, - unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - int div; - - if (rate > parent_rate) - rate = parent_rate; - else { - div = rate / parent_rate; - - if (div == 0) - div = 1; - if (div > 16) - div = 16; - - rate = parent_rate / div; - } - - return rate; -} - -static struct clk *clkset_spi_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll2, - &clk_fin_epll, - &clk_mout_hpll.clk, -}; - -static struct clk_sources clkset_spi = { - .sources = clkset_spi_list, - .nr_sources = ARRAY_SIZE(clkset_spi_list), -}; - -static struct clksrc_clk clk_spi0 = { - .clk = { - .name = "spi_bus", - .id = 0, - .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI0, - .enable = s5pc100_sclk0_ctrl, - .set_parent = s5pc100_setparent_clksrc, - .get_rate = s5pc100_getrate_clksrc, - .set_rate = s5pc100_setrate_clksrc, - .round_rate = s5pc100_roundrate_clksrc, - }, - .shift = S5PC100_CLKSRC1_SPI0_SHIFT, - .mask = S5PC100_CLKSRC1_SPI0_MASK, - .sources = &clkset_spi, - .divider_shift = S5PC100_CLKDIV2_SPI0_SHIFT, - .reg_divider = S5PC100_CLKDIV2, - .reg_source = S5PC100_CLKSRC1, -}; - -static struct clksrc_clk clk_spi1 = { - .clk = { - .name = "spi_bus", - .id = 1, - .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI1, - .enable = s5pc100_sclk0_ctrl, - .set_parent = s5pc100_setparent_clksrc, - .get_rate = s5pc100_getrate_clksrc, - .set_rate = s5pc100_setrate_clksrc, - .round_rate = s5pc100_roundrate_clksrc, - }, - .shift = S5PC100_CLKSRC1_SPI1_SHIFT, - .mask = S5PC100_CLKSRC1_SPI1_MASK, - .sources = &clkset_spi, - .divider_shift = S5PC100_CLKDIV2_SPI1_SHIFT, - .reg_divider = S5PC100_CLKDIV2, - .reg_source = S5PC100_CLKSRC1, -}; - -static struct clksrc_clk clk_spi2 = { - .clk = { - .name = "spi_bus", - .id = 2, - .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI2, - .enable = s5pc100_sclk0_ctrl, - .set_parent = s5pc100_setparent_clksrc, - .get_rate = s5pc100_getrate_clksrc, - .set_rate = s5pc100_setrate_clksrc, - .round_rate = s5pc100_roundrate_clksrc, - }, - .shift = S5PC100_CLKSRC1_SPI2_SHIFT, - .mask = S5PC100_CLKSRC1_SPI2_MASK, - .sources = &clkset_spi, - .divider_shift = S5PC100_CLKDIV2_SPI2_SHIFT, - .reg_divider = S5PC100_CLKDIV2, - .reg_source = S5PC100_CLKSRC1, -}; - -static struct clk *clkset_uart_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll, -}; - -static struct clk_sources clkset_uart = { - .sources = clkset_uart_list, - .nr_sources = ARRAY_SIZE(clkset_uart_list), -}; - -static struct clksrc_clk clk_uart_uclk1 = { - .clk = { - .name = "uclk1", - .id = -1, - .ctrlbit = S5PC100_CLKGATE_SCLK0_UART, - .enable = s5pc100_sclk0_ctrl, - .set_parent = s5pc100_setparent_clksrc, - .get_rate = s5pc100_getrate_clksrc, - .set_rate = s5pc100_setrate_clksrc, - .round_rate = s5pc100_roundrate_clksrc, - }, - .shift = S5PC100_CLKSRC1_UART_SHIFT, - .mask = S5PC100_CLKSRC1_UART_MASK, - .sources = &clkset_uart, - .divider_shift = S5PC100_CLKDIV2_UART_SHIFT, - .reg_divider = S5PC100_CLKDIV2, - .reg_source = S5PC100_CLKSRC1, -}; - static struct clk clk_iis_cd0 = { .name = "iis_cdclk0", .id = -1, @@ -672,28 +480,31 @@ static struct clk *clkset_audio0_list[] = { &clk_mout_hpll.clk, }; -static struct clk_sources clkset_audio0 = { +static struct clksrc_sources clkset_audio0 = { .sources = clkset_audio0_list, .nr_sources = ARRAY_SIZE(clkset_audio0_list), }; -static struct clksrc_clk clk_audio0 = { - .clk = { - .name = "audio-bus", - .id = 0, - .ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO0, - .enable = s5pc100_sclk1_ctrl, - .set_parent = s5pc100_setparent_clksrc, - .get_rate = s5pc100_getrate_clksrc, - .set_rate = s5pc100_setrate_clksrc, - .round_rate = s5pc100_roundrate_clksrc, - }, - .shift = S5PC100_CLKSRC3_AUDIO0_SHIFT, - .mask = S5PC100_CLKSRC3_AUDIO0_MASK, - .sources = &clkset_audio0, - .divider_shift = S5PC100_CLKDIV4_AUDIO0_SHIFT, - .reg_divider = S5PC100_CLKDIV4, - .reg_source = S5PC100_CLKSRC3, +static struct clk *clkset_spi_list[] = { + &clk_mout_epll.clk, + &clk_dout_mpll2, + &clk_fin_epll, + &clk_mout_hpll.clk, +}; + +static struct clksrc_sources clkset_spi = { + .sources = clkset_spi_list, + .nr_sources = ARRAY_SIZE(clkset_spi_list), +}; + +static struct clk *clkset_uart_list[] = { + &clk_mout_epll.clk, + &clk_dout_mpll, +}; + +static struct clksrc_sources clkset_uart = { + .sources = clkset_uart_list, + .nr_sources = ARRAY_SIZE(clkset_uart_list), }; static struct clk *clkset_audio1_list[] = { @@ -705,30 +516,11 @@ static struct clk *clkset_audio1_list[] = { &clk_mout_hpll.clk, }; -static struct clk_sources clkset_audio1 = { +static struct clksrc_sources clkset_audio1 = { .sources = clkset_audio1_list, .nr_sources = ARRAY_SIZE(clkset_audio1_list), }; -static struct clksrc_clk clk_audio1 = { - .clk = { - .name = "audio-bus", - .id = 1, - .ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO1, - .enable = s5pc100_sclk1_ctrl, - .set_parent = s5pc100_setparent_clksrc, - .get_rate = s5pc100_getrate_clksrc, - .set_rate = s5pc100_setrate_clksrc, - .round_rate = s5pc100_roundrate_clksrc, - }, - .shift = S5PC100_CLKSRC3_AUDIO1_SHIFT, - .mask = S5PC100_CLKSRC3_AUDIO1_MASK, - .sources = &clkset_audio1, - .divider_shift = S5PC100_CLKDIV4_AUDIO1_SHIFT, - .reg_divider = S5PC100_CLKDIV4, - .reg_source = S5PC100_CLKSRC3, -}; - static struct clk *clkset_audio2_list[] = { &clk_mout_epll.clk, &clk_dout_mpll, @@ -737,52 +529,56 @@ static struct clk *clkset_audio2_list[] = { &clk_mout_hpll.clk, }; -static struct clk_sources clkset_audio2 = { +static struct clksrc_sources clkset_audio2 = { .sources = clkset_audio2_list, .nr_sources = ARRAY_SIZE(clkset_audio2_list), }; -static struct clksrc_clk clk_audio2 = { - .clk = { - .name = "audio-bus", - .id = 2, - .ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO2, - .enable = s5pc100_sclk1_ctrl, - .set_parent = s5pc100_setparent_clksrc, - .get_rate = s5pc100_getrate_clksrc, - .set_rate = s5pc100_setrate_clksrc, - .round_rate = s5pc100_roundrate_clksrc, +static struct clksrc_clk clksrc_audio[] = { + { + .clk = { + .name = "audio-bus", + .id = 0, + .ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO0, + .enable = s5pc100_sclk1_ctrl, + }, + .sources = &clkset_audio0, + .reg_div = { .reg = S5PC100_CLKDIV4, .shift = 12, .size = 4, }, + .reg_src = { .reg = S5PC100_CLKSRC3, .shift = 12, .size = 3, }, + }, { + .clk = { + .name = "audio-bus", + .id = 1, + .ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO1, + .enable = s5pc100_sclk1_ctrl, + }, + .sources = &clkset_audio1, + .reg_div = { .reg = S5PC100_CLKDIV4, .shift = 16, .size = 4, }, + .reg_src = { .reg = S5PC100_CLKSRC3, .shift = 16, .size = 3, }, + }, { + .clk = { + .name = "audio-bus", + .id = 2, + .ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO2, + .enable = s5pc100_sclk1_ctrl, + }, + .sources = &clkset_audio2, + .reg_div = { .reg = S5PC100_CLKDIV4, .shift = 20, .size = 4, }, + .reg_src = { .reg = S5PC100_CLKSRC3, .shift = 20, .size = 3, }, }, - .shift = S5PC100_CLKSRC3_AUDIO2_SHIFT, - .mask = S5PC100_CLKSRC3_AUDIO2_MASK, - .sources = &clkset_audio2, - .divider_shift = S5PC100_CLKDIV4_AUDIO2_SHIFT, - .reg_divider = S5PC100_CLKDIV4, - .reg_source = S5PC100_CLKSRC3, }; static struct clk *clkset_spdif_list[] = { - &clk_audio0.clk, - &clk_audio1.clk, - &clk_audio2.clk, + &clksrc_audio[0].clk, + &clksrc_audio[1].clk, + &clksrc_audio[2].clk, }; -static struct clk_sources clkset_spdif = { +static struct clksrc_sources clkset_spdif = { .sources = clkset_spdif_list, .nr_sources = ARRAY_SIZE(clkset_spdif_list), }; -static struct clksrc_clk clk_spdif = { - .clk = { - .name = "spdif", - .id = -1, - }, - .shift = S5PC100_CLKSRC3_SPDIF_SHIFT, - .mask = S5PC100_CLKSRC3_SPDIF_MASK, - .sources = &clkset_spdif, - .reg_source = S5PC100_CLKSRC3, -}; - static struct clk *clkset_lcd_fimc_list[] = { &clk_mout_epll.clk, &clk_dout_mpll, @@ -790,87 +586,11 @@ static struct clk *clkset_lcd_fimc_list[] = { &clk_vclk_54m, }; -static struct clk_sources clkset_lcd_fimc = { +static struct clksrc_sources clkset_lcd_fimc = { .sources = clkset_lcd_fimc_list, .nr_sources = ARRAY_SIZE(clkset_lcd_fimc_list), }; -static struct clksrc_clk clk_lcd = { - .clk = { - .name = "lcd", - .id = -1, - .ctrlbit = S5PC100_CLKGATE_SCLK1_LCD, - .enable = s5pc100_sclk1_ctrl, - .set_parent = s5pc100_setparent_clksrc, - .get_rate = s5pc100_getrate_clksrc, - .set_rate = s5pc100_setrate_clksrc, - .round_rate = s5pc100_roundrate_clksrc, - }, - .shift = S5PC100_CLKSRC2_LCD_SHIFT, - .mask = S5PC100_CLKSRC2_LCD_MASK, - .sources = &clkset_lcd_fimc, - .divider_shift = S5PC100_CLKDIV3_LCD_SHIFT, - .reg_divider = S5PC100_CLKDIV3, - .reg_source = S5PC100_CLKSRC2, -}; - -static struct clksrc_clk clk_fimc0 = { - .clk = { - .name = "fimc", - .id = 0, - .ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC0, - .enable = s5pc100_sclk1_ctrl, - .set_parent = s5pc100_setparent_clksrc, - .get_rate = s5pc100_getrate_clksrc, - .set_rate = s5pc100_setrate_clksrc, - .round_rate = s5pc100_roundrate_clksrc, - }, - .shift = S5PC100_CLKSRC2_FIMC0_SHIFT, - .mask = S5PC100_CLKSRC2_FIMC0_MASK, - .sources = &clkset_lcd_fimc, - .divider_shift = S5PC100_CLKDIV3_FIMC0_SHIFT, - .reg_divider = S5PC100_CLKDIV3, - .reg_source = S5PC100_CLKSRC2, -}; - -static struct clksrc_clk clk_fimc1 = { - .clk = { - .name = "fimc", - .id = 1, - .ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC1, - .enable = s5pc100_sclk1_ctrl, - .set_parent = s5pc100_setparent_clksrc, - .get_rate = s5pc100_getrate_clksrc, - .set_rate = s5pc100_setrate_clksrc, - .round_rate = s5pc100_roundrate_clksrc, - }, - .shift = S5PC100_CLKSRC2_FIMC1_SHIFT, - .mask = S5PC100_CLKSRC2_FIMC1_MASK, - .sources = &clkset_lcd_fimc, - .divider_shift = S5PC100_CLKDIV3_FIMC1_SHIFT, - .reg_divider = S5PC100_CLKDIV3, - .reg_source = S5PC100_CLKSRC2, -}; - -static struct clksrc_clk clk_fimc2 = { - .clk = { - .name = "fimc", - .id = 2, - .ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC2, - .enable = s5pc100_sclk1_ctrl, - .set_parent = s5pc100_setparent_clksrc, - .get_rate = s5pc100_getrate_clksrc, - .set_rate = s5pc100_setrate_clksrc, - .round_rate = s5pc100_roundrate_clksrc, - }, - .shift = S5PC100_CLKSRC2_FIMC2_SHIFT, - .mask = S5PC100_CLKSRC2_FIMC2_MASK, - .sources = &clkset_lcd_fimc, - .divider_shift = S5PC100_CLKDIV3_FIMC2_SHIFT, - .reg_divider = S5PC100_CLKDIV3, - .reg_source = S5PC100_CLKSRC2, -}; - static struct clk *clkset_mmc_list[] = { &clk_mout_epll.clk, &clk_dout_mpll, @@ -878,69 +598,11 @@ static struct clk *clkset_mmc_list[] = { &clk_mout_hpll.clk , }; -static struct clk_sources clkset_mmc = { +static struct clksrc_sources clkset_mmc = { .sources = clkset_mmc_list, .nr_sources = ARRAY_SIZE(clkset_mmc_list), }; -static struct clksrc_clk clk_mmc0 = { - .clk = { - .name = "mmc_bus", - .id = 0, - .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC0, - .enable = s5pc100_sclk0_ctrl, - .set_parent = s5pc100_setparent_clksrc, - .get_rate = s5pc100_getrate_clksrc, - .set_rate = s5pc100_setrate_clksrc, - .round_rate = s5pc100_roundrate_clksrc, - }, - .shift = S5PC100_CLKSRC2_MMC0_SHIFT, - .mask = S5PC100_CLKSRC2_MMC0_MASK, - .sources = &clkset_mmc, - .divider_shift = S5PC100_CLKDIV3_MMC0_SHIFT, - .reg_divider = S5PC100_CLKDIV3, - .reg_source = S5PC100_CLKSRC2, -}; - -static struct clksrc_clk clk_mmc1 = { - .clk = { - .name = "mmc_bus", - .id = 1, - .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC1, - .enable = s5pc100_sclk0_ctrl, - .set_parent = s5pc100_setparent_clksrc, - .get_rate = s5pc100_getrate_clksrc, - .set_rate = s5pc100_setrate_clksrc, - .round_rate = s5pc100_roundrate_clksrc, - }, - .shift = S5PC100_CLKSRC2_MMC1_SHIFT, - .mask = S5PC100_CLKSRC2_MMC1_MASK, - .sources = &clkset_mmc, - .divider_shift = S5PC100_CLKDIV3_MMC1_SHIFT, - .reg_divider = S5PC100_CLKDIV3, - .reg_source = S5PC100_CLKSRC2, -}; - -static struct clksrc_clk clk_mmc2 = { - .clk = { - .name = "mmc_bus", - .id = 2, - .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC2, - .enable = s5pc100_sclk0_ctrl, - .set_parent = s5pc100_setparent_clksrc, - .get_rate = s5pc100_getrate_clksrc, - .set_rate = s5pc100_setrate_clksrc, - .round_rate = s5pc100_roundrate_clksrc, - }, - .shift = S5PC100_CLKSRC2_MMC2_SHIFT, - .mask = S5PC100_CLKSRC2_MMC2_MASK, - .sources = &clkset_mmc, - .divider_shift = S5PC100_CLKDIV3_MMC2_SHIFT, - .reg_divider = S5PC100_CLKDIV3, - .reg_source = S5PC100_CLKSRC2, -}; - - static struct clk *clkset_usbhost_list[] = { &clk_mout_epll.clk, &clk_dout_mpll, @@ -948,28 +610,141 @@ static struct clk *clkset_usbhost_list[] = { &clk_48m, }; -static struct clk_sources clkset_usbhost = { +static struct clksrc_sources clkset_usbhost = { .sources = clkset_usbhost_list, .nr_sources = ARRAY_SIZE(clkset_usbhost_list), }; -static struct clksrc_clk clk_usbhost = { - .clk = { - .name = "usbhost", - .id = -1, - .ctrlbit = S5PC100_CLKGATE_SCLK0_USBHOST, - .enable = s5pc100_sclk0_ctrl, - .set_parent = s5pc100_setparent_clksrc, - .get_rate = s5pc100_getrate_clksrc, - .set_rate = s5pc100_setrate_clksrc, - .round_rate = s5pc100_roundrate_clksrc, - }, - .shift = S5PC100_CLKSRC1_UHOST_SHIFT, - .mask = S5PC100_CLKSRC1_UHOST_MASK, - .sources = &clkset_usbhost, - .divider_shift = S5PC100_CLKDIV2_UHOST_SHIFT, - .reg_divider = S5PC100_CLKDIV2, - .reg_source = S5PC100_CLKSRC1, +static struct clksrc_clk clksrc_clks[] = { + { + .clk = { + .name = "spi_bus", + .id = 0, + .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI0, + .enable = s5pc100_sclk0_ctrl, + + }, + .sources = &clkset_spi, + .reg_div = { .reg = S5PC100_CLKDIV2, .shift = 4, .size = 4, }, + .reg_src = { .reg = S5PC100_CLKSRC1, .shift = 4, .size = 2, }, + }, { + .clk = { + .name = "spi_bus", + .id = 1, + .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI1, + .enable = s5pc100_sclk0_ctrl, + }, + .sources = &clkset_spi, + .reg_div = { .reg = S5PC100_CLKDIV2, .shift = 8, .size = 4, }, + .reg_src = { .reg = S5PC100_CLKSRC1, .shift = 8, .size = 2, }, + }, { + .clk = { + .name = "spi_bus", + .id = 2, + .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI2, + .enable = s5pc100_sclk0_ctrl, + }, + .sources = &clkset_spi, + .reg_div = { .reg = S5PC100_CLKDIV2, .shift = 12, .size = 4, }, + .reg_src = { .reg = S5PC100_CLKSRC1, .shift = 12, .size = 2, }, + }, { + .clk = { + .name = "uclk1", + .id = -1, + .ctrlbit = S5PC100_CLKGATE_SCLK0_UART, + .enable = s5pc100_sclk0_ctrl, + }, + .sources = &clkset_uart, + .reg_div = { .reg = S5PC100_CLKDIV2, .shift = 0, .size = 3, }, + .reg_src = { .reg = S5PC100_CLKSRC1, .shift = 0, .size = 1, }, + }, { + .clk = { + .name = "spdif", + .id = -1, + }, + .sources = &clkset_spdif, + .reg_src = { .reg = S5PC100_CLKSRC3, .shift = 24, .size = 2, }, + }, { + .clk = { + .name = "lcd", + .id = -1, + .ctrlbit = S5PC100_CLKGATE_SCLK1_LCD, + .enable = s5pc100_sclk1_ctrl, + }, + .sources = &clkset_lcd_fimc, + .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 12, .size = 4, }, + .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 12, .size = 2, }, + }, { + .clk = { + .name = "fimc", + .id = 0, + .ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC0, + .enable = s5pc100_sclk1_ctrl, + }, + .sources = &clkset_lcd_fimc, + .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 16, .size = 4, }, + .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 16, .size = 2, }, + }, { + .clk = { + .name = "fimc", + .id = 1, + .ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC1, + .enable = s5pc100_sclk1_ctrl, + }, + .sources = &clkset_lcd_fimc, + .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 20, .size = 4, }, + .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 20, .size = 2, }, + }, { + .clk = { + .name = "fimc", + .id = 2, + .ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC2, + .enable = s5pc100_sclk1_ctrl, + }, + .sources = &clkset_lcd_fimc, + .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 24, .size = 4, }, + .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 24, .size = 2, }, + }, { + .clk = { + .name = "mmc_bus", + .id = 0, + .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC0, + .enable = s5pc100_sclk0_ctrl, + }, + .sources = &clkset_mmc, + .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 0, .size = 4, }, + .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 0, .size = 2, }, + }, { + .clk = { + .name = "mmc_bus", + .id = 1, + .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC1, + .enable = s5pc100_sclk0_ctrl, + }, + .sources = &clkset_mmc, + .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 4, .size = 4, }, + .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 4, .size = 2, }, + }, { + .clk = { + .name = "mmc_bus", + .id = 2, + .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC2, + .enable = s5pc100_sclk0_ctrl, + }, + .sources = &clkset_mmc, + .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 8, .size = 4, }, + .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 8, .size = 2, }, + }, { + .clk = { + .name = "usbhost", + .id = -1, + .ctrlbit = S5PC100_CLKGATE_SCLK0_USBHOST, + .enable = s5pc100_sclk0_ctrl, + }, + .sources = &clkset_usbhost, + .reg_div = { .reg = S5PC100_CLKDIV2, .shift = 20, .size = 4, }, + .reg_src = { .reg = S5PC100_CLKSRC1, .shift = 20, .size = 2, }, + } }; /* Clock initialisation code */ @@ -981,45 +756,8 @@ static struct clksrc_clk *init_parents[] = { &clk_mout_onenand, &clk_mout_epll, &clk_mout_hpll, - &clk_spi0, - &clk_spi1, - &clk_spi2, - &clk_uart_uclk1, - &clk_audio0, - &clk_audio1, - &clk_audio2, - &clk_spdif, - &clk_lcd, - &clk_fimc0, - &clk_fimc1, - &clk_fimc2, - &clk_mmc0, - &clk_mmc1, - &clk_mmc2, - &clk_usbhost, }; -static void __init_or_cpufreq s5pc100_set_clksrc(struct clksrc_clk *clk) -{ - struct clk_sources *srcs = clk->sources; - u32 clksrc = __raw_readl(clk->reg_source); - - clksrc &= clk->mask; - clksrc >>= clk->shift; - - if (clksrc > srcs->nr_sources || !srcs->sources[clksrc]) { - printk(KERN_ERR "%s: bad source %d\n", - clk->clk.name, clksrc); - return; - } - - clk->clk.parent = srcs->sources[clksrc]; - - printk(KERN_INFO "%s: source is %s (%d), rate is %ld.%03ld MHz\n", - clk->clk.name, clk->clk.parent->name, clksrc, - print_mhz(clk_get_rate(&clk->clk))); -} - #define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1) void __init_or_cpufreq s5pc100_setup_clocks(void) @@ -1083,17 +821,25 @@ void __init_or_cpufreq s5pc100_setup_clocks(void) clk_f.rate = armclk; for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++) - s5pc100_set_clksrc(init_parents[ptr]); + s3c_set_clksrc(init_parents[ptr], true); + + for (ptr = 0; ptr < ARRAY_SIZE(clksrc_audio); ptr++) + s3c_set_clksrc(clksrc_audio + ptr, true); + + for (ptr = 0; ptr < ARRAY_SIZE(clksrc_clks); ptr++) + s3c_set_clksrc(clksrc_clks + ptr, true); } static struct clk *clks[] __initdata = { &clk_ext_xtal_mux, - &clk_mout_apll.clk, &clk_dout_apll, &clk_dout_d0_bus, &clk_dout_pclkd0, &clk_dout_apll2, + &clk_mout_apll.clk, &clk_mout_mpll.clk, + &clk_mout_epll.clk, + &clk_mout_hpll.clk, &clk_mout_am.clk, &clk_dout_d1_bus, &clk_mout_onenand.clk, @@ -1101,29 +847,12 @@ static struct clk *clks[] __initdata = { &clk_dout_mpll2, &clk_dout_cam, &clk_dout_mpll, - &clk_mout_epll.clk, &clk_fout_epll, &clk_iis_cd0, &clk_iis_cd1, &clk_iis_cd2, &clk_pcm_cd0, &clk_pcm_cd1, - &clk_spi0.clk, - &clk_spi1.clk, - &clk_spi2.clk, - &clk_uart_uclk1.clk, - &clk_audio0.clk, - &clk_audio1.clk, - &clk_audio2.clk, - &clk_spdif.clk, - &clk_lcd.clk, - &clk_fimc0.clk, - &clk_fimc1.clk, - &clk_fimc2.clk, - &clk_mmc0.clk, - &clk_mmc1.clk, - &clk_mmc2.clk, - &clk_usbhost.clk, &clk_arm, }; @@ -1141,4 +870,7 @@ void __init s5pc100_register_clocks(void) clkp->name, ret); } } + + s3c_register_clksrc(clksrc_audio, ARRAY_SIZE(clksrc_audio)); + s3c_register_clksrc(clksrc_clks, ARRAY_SIZE(clksrc_clks)); } diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 486a0d6301e..d552c65fa1b 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -7,11 +7,240 @@ config PLAT_SAMSUNG bool depends on ARCH_S3C2410 || ARCH_S3C24A0 || ARCH_S3C64XX || ARCH_S5PC1XX + select NO_IOPORT default y help Base platform code for all Samsung SoC based systems if PLAT_SAMSUNG +# boot configurations + +comment "Boot options" + +config S3C_BOOT_WATCHDOG + bool "S3C Initialisation watchdog" + depends on S3C2410_WATCHDOG + help + Say y to enable the watchdog during the kernel decompression + stage. If the kernel fails to uncompress, then the watchdog + will trigger a reset and the system should restart. + +config S3C_BOOT_ERROR_RESET + bool "S3C Reboot on decompression error" + help + Say y here to use the watchdog to reset the system if the + kernel decompressor detects an error during decompression. + +config S3C_BOOT_UART_FORCE_FIFO + bool "Force UART FIFO on during boot process" + default y + help + Say Y here to force the UART FIFOs on during the kernel + uncompressor + + +config S3C_LOWLEVEL_UART_PORT + int "S3C UART to use for low-level messages" + default 0 + help + Choice of which UART port to use for the low-level messages, + such as the `Uncompressing...` at start time. The value of + this configuration should be between zero and two. The port + must have been initialised by the boot-loader before use. + +# clock options + +config SAMSUNG_CLKSRC + bool + help + Select the clock code for the clksrc implementation + used by newer systems such as the S3C64XX. + +# options for IRQ support + +config SAMSUNG_IRQ_VIC_TIMER + bool + help + Internal configuration to build the VIC timer interrupt code. + +config SAMSUNG_IRQ_UART + bool + help + Internal configuration to build the IRQ UART demux code. + +# options for gpio configuration support + +config SAMSUNG_GPIOLIB_4BIT + bool + help + GPIOlib file contains the 4 bit modification functions for gpio + configuration. GPIOlib shall be compiled only for S3C64XX and S5P + series of processors. + +config S3C_GPIO_CFG_S3C24XX + bool + help + Internal configuration to enable S3C24XX style GPIO configuration + functions. + +config S3C_GPIO_CFG_S3C64XX + bool + help + Internal configuration to enable S3C64XX style GPIO configuration + functions. + +config S5P_GPIO_CFG_S5PC1XX + bool + help + Internal configuration to enable S5PC1XX style GPIO configuration + functions. + +config S3C_GPIO_PULL_UPDOWN + bool + help + Internal configuration to enable the correct GPIO pull helper + +config S3C_GPIO_PULL_DOWN + bool + help + Internal configuration to enable the correct GPIO pull helper + +config S3C_GPIO_PULL_UP + bool + help + Internal configuration to enable the correct GPIO pull helper + +config SAMSUNG_GPIO_EXTRA + int "Number of additional GPIO pins" + default 0 + help + Use additional GPIO space in addition to the GPIO's the SOC + provides. This allows expanding the GPIO space for use with + GPIO expanders. + +config S3C_GPIO_SPACE + int "Space between gpio banks" + default 0 + help + Add a number of spare GPIO entries between each bank for debugging + purposes. This allows any problems where an counter overflows from + one bank to another to be caught, at the expense of using a little + more memory. + +config S3C_GPIO_TRACK + bool + help + Internal configuration option to enable the s3c specific gpio + chip tracking if the platform requires it. + +# ADC driver + +config S3C_ADC + bool "ADC common driver support" + help + Core support for the ADC block found in the Samsung SoC systems + for drivers such as the touchscreen and hwmon to use to share + this resource. + +# device definitions to compile in + +config S3C_DEV_HSMMC + bool + help + Compile in platform device definitions for HSMMC code + +config S3C_DEV_HSMMC1 + bool + help + Compile in platform device definitions for HSMMC channel 1 + +config S3C_DEV_HSMMC2 + bool + help + Compile in platform device definitions for HSMMC channel 2 + +config S3C_DEV_I2C1 + bool + help + Compile in platform device definitions for I2C channel 1 + +config S3C_DEV_FB + bool + help + Compile in platform device definition for framebuffer + +config S3C_DEV_USB_HOST + bool + help + Compile in platform device definition for USB host. + +config S3C_DEV_USB_HSOTG + bool + help + Compile in platform device definition for USB high-speed OtG + +config S3C_DEV_NAND + bool + help + Compile in platform device definition for NAND controller + +config S3C64XX_DEV_SPI + bool + help + Compile in platform device definitions for S3C64XX's type + SPI controllers. + +# DMA + +config S3C_DMA + bool + help + Internal configuration for S3C DMA core + +comment "Power management" + +config SAMSUNG_PM_DEBUG + bool "S3C2410 PM Suspend debug" + depends on PM + help + Say Y here if you want verbose debugging from the PM Suspend and + Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt> + for more information. + +config S3C_PM_DEBUG_LED_SMDK + bool "SMDK LED suspend/resume debugging" + depends on PM && (MACH_SMDK6410) + help + Say Y here to enable the use of the SMDK LEDs on the baseboard + for debugging of the state of the suspend and resume process. + + Note, this currently only works for S3C64XX based SMDK boards. + +config SAMSUNG_PM_CHECK + bool "S3C2410 PM Suspend Memory CRC" + depends on PM && CRC32 + help + Enable the PM code's memory area checksum over sleep. This option + will generate CRCs of all blocks of memory, and store them before + going to sleep. The blocks are then checked on resume for any + errors. + + Note, this can take several seconds depending on memory size + and CPU speed. + + See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt> + +config SAMSUNG_PM_CHECK_CHUNKSIZE + int "S3C2410 PM Suspend CRC Chunksize (KiB)" + depends on PM && SAMSUNG_PM_CHECK + default 64 + help + Set the chunksize in Kilobytes of the CRC for checking memory + corruption over suspend and resume. A smaller value will mean that + the CRC data block will take more memory, but wil identify any + faults with better precision. + + See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt> endif diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index 4478b9f7dc3..22c89d08f6e 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -9,3 +9,48 @@ obj-m := obj-n := dummy.o obj- := +# Objects we always build independent of SoC choice + +obj-y += init.o +obj-y += time.o +obj-y += clock.o +obj-y += pwm-clock.o +obj-y += gpio.o +obj-y += gpio-config.o + +obj-$(CONFIG_SAMSUNG_GPIOLIB_4BIT) += gpiolib.o +obj-$(CONFIG_SAMSUNG_CLKSRC) += clock-clksrc.o + +obj-$(CONFIG_SAMSUNG_IRQ_UART) += irq-uart.o +obj-$(CONFIG_SAMSUNG_IRQ_VIC_TIMER) += irq-vic-timer.o + +# ADC + +obj-$(CONFIG_S3C_ADC) += adc.o + +# devices + +obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o +obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o +obj-$(CONFIG_S3C_DEV_HSMMC2) += dev-hsmmc2.o +obj-y += dev-i2c0.o +obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o +obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o +obj-y += dev-uart.o +obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o +obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o +obj-$(CONFIG_S3C_DEV_NAND) += dev-nand.o + +# DMA support + +obj-$(CONFIG_S3C_DMA) += dma.o + +# PM support + +obj-$(CONFIG_PM) += pm.o +obj-$(CONFIG_PM) += pm-gpio.o +obj-$(CONFIG_SAMSUNG_PM_CHECK) += pm-check.o + +# PWM support + +obj-$(CONFIG_HAVE_PWM) += pwm.o diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-samsung/adc.c index ce47627f336..0b5833b9ac5 100644 --- a/arch/arm/plat-s3c24xx/adc.c +++ b/arch/arm/plat-samsung/adc.c @@ -1,10 +1,10 @@ -/* arch/arm/plat-s3c24xx/adc.c +/* arch/arm/plat-samsung/adc.c * * Copyright (c) 2008 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org> * - * S3C24XX ADC device core + * Samsung ADC device core * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -37,6 +37,11 @@ * action is required. */ +enum s3c_cpu_type { + TYPE_S3C24XX, + TYPE_S3C64XX +}; + struct s3c_adc_client { struct platform_device *pdev; struct list_head pend; @@ -257,12 +262,13 @@ static irqreturn_t s3c_adc_irq(int irq, void *pw) { struct adc_device *adc = pw; struct s3c_adc_client *client = adc->cur; + enum s3c_cpu_type cpu = platform_get_device_id(adc->pdev)->driver_data; unsigned long flags; unsigned data0, data1; if (!client) { dev_warn(&adc->pdev->dev, "%s: no adc pending\n", __func__); - return IRQ_HANDLED; + goto exit; } data0 = readl(adc->regs + S3C2410_ADCDAT0); @@ -271,9 +277,17 @@ static irqreturn_t s3c_adc_irq(int irq, void *pw) client->nr_samples--; + if (cpu == TYPE_S3C64XX) { + /* S3C64XX ADC resolution is 12-bit */ + data0 &= 0xfff; + data1 &= 0xfff; + } else { + data0 &= 0x3ff; + data1 &= 0x3ff; + } + if (client->convert_cb) - (client->convert_cb)(client, data0 & 0x3ff, data1 & 0x3ff, - &client->nr_samples); + (client->convert_cb)(client, data0, data1, &client->nr_samples); if (client->nr_samples > 0) { /* fire another conversion for this */ @@ -289,6 +303,11 @@ static irqreturn_t s3c_adc_irq(int irq, void *pw) local_irq_restore(flags); } +exit: + if (cpu == TYPE_S3C64XX) { + /* Clear ADC interrupt */ + writel(0, adc->regs + S3C64XX_ADCCLRINT); + } return IRQ_HANDLED; } @@ -298,6 +317,7 @@ static int s3c_adc_probe(struct platform_device *pdev) struct adc_device *adc; struct resource *regs; int ret; + unsigned tmp; adc = kzalloc(sizeof(struct adc_device), GFP_KERNEL); if (adc == NULL) { @@ -344,8 +364,12 @@ static int s3c_adc_probe(struct platform_device *pdev) clk_enable(adc->clk); - writel(adc->prescale | S3C2410_ADCCON_PRSCEN, - adc->regs + S3C2410_ADCCON); + tmp = adc->prescale | S3C2410_ADCCON_PRSCEN; + if (platform_get_device_id(pdev)->driver_data == TYPE_S3C64XX) { + /* Enable 12-bit ADC resolution */ + tmp |= S3C64XX_ADCCON_RESSEL; + } + writel(tmp, adc->regs + S3C2410_ADCCON); dev_info(dev, "attached adc driver\n"); @@ -388,6 +412,7 @@ static int s3c_adc_suspend(struct platform_device *pdev, pm_message_t state) con |= S3C2410_ADCCON_STDBM; writel(con, adc->regs + S3C2410_ADCCON); + disable_irq(adc->irq); clk_disable(adc->clk); return 0; @@ -398,6 +423,7 @@ static int s3c_adc_resume(struct platform_device *pdev) struct adc_device *adc = platform_get_drvdata(pdev); clk_enable(adc->clk); + enable_irq(adc->irq); writel(adc->prescale | S3C2410_ADCCON_PRSCEN, adc->regs + S3C2410_ADCCON); @@ -410,9 +436,22 @@ static int s3c_adc_resume(struct platform_device *pdev) #define s3c_adc_resume NULL #endif +static struct platform_device_id s3c_adc_driver_ids[] = { + { + .name = "s3c24xx-adc", + .driver_data = TYPE_S3C24XX, + }, { + .name = "s3c64xx-adc", + .driver_data = TYPE_S3C64XX, + }, + { } +}; +MODULE_DEVICE_TABLE(platform, s3c_adc_driver_ids); + static struct platform_driver s3c_adc_driver = { + .id_table = s3c_adc_driver_ids, .driver = { - .name = "s3c24xx-adc", + .name = "s3c-adc", .owner = THIS_MODULE, }, .probe = s3c_adc_probe, diff --git a/arch/arm/plat-samsung/clock-clksrc.c b/arch/arm/plat-samsung/clock-clksrc.c new file mode 100644 index 00000000000..ae8b8507663 --- /dev/null +++ b/arch/arm/plat-samsung/clock-clksrc.c @@ -0,0 +1,212 @@ +/* linux/arch/arm/plat-samsung/clock-clksrc.c + * + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/sysdev.h> +#include <linux/io.h> + +#include <plat/clock.h> +#include <plat/clock-clksrc.h> +#include <plat/cpu-freq.h> + +static inline struct clksrc_clk *to_clksrc(struct clk *clk) +{ + return container_of(clk, struct clksrc_clk, clk); +} + +static inline u32 bit_mask(u32 shift, u32 nr_bits) +{ + u32 mask = 0xffffffff >> (32 - nr_bits); + + return mask << shift; +} + +static unsigned long s3c_getrate_clksrc(struct clk *clk) +{ + struct clksrc_clk *sclk = to_clksrc(clk); + unsigned long rate = clk_get_rate(clk->parent); + u32 clkdiv = __raw_readl(sclk->reg_div.reg); + u32 mask = bit_mask(sclk->reg_div.shift, sclk->reg_div.size); + + clkdiv &= mask; + clkdiv >>= sclk->reg_div.shift; + clkdiv++; + + rate /= clkdiv; + return rate; +} + +static int s3c_setrate_clksrc(struct clk *clk, unsigned long rate) +{ + struct clksrc_clk *sclk = to_clksrc(clk); + void __iomem *reg = sclk->reg_div.reg; + unsigned int div; + u32 mask = bit_mask(sclk->reg_div.shift, sclk->reg_div.size); + u32 val; + + rate = clk_round_rate(clk, rate); + div = clk_get_rate(clk->parent) / rate; + if (div > (1 << sclk->reg_div.size)) + return -EINVAL; + + val = __raw_readl(reg); + val &= ~mask; + val |= (div - 1) << sclk->reg_div.shift; + __raw_writel(val, reg); + + return 0; +} + +static int s3c_setparent_clksrc(struct clk *clk, struct clk *parent) +{ + struct clksrc_clk *sclk = to_clksrc(clk); + struct clksrc_sources *srcs = sclk->sources; + u32 clksrc = __raw_readl(sclk->reg_src.reg); + u32 mask = bit_mask(sclk->reg_src.shift, sclk->reg_src.size); + int src_nr = -1; + int ptr; + + for (ptr = 0; ptr < srcs->nr_sources; ptr++) + if (srcs->sources[ptr] == parent) { + src_nr = ptr; + break; + } + + if (src_nr >= 0) { + clk->parent = parent; + + clksrc &= ~mask; + clksrc |= src_nr << sclk->reg_src.shift; + + __raw_writel(clksrc, sclk->reg_src.reg); + return 0; + } + + return -EINVAL; +} + +static unsigned long s3c_roundrate_clksrc(struct clk *clk, + unsigned long rate) +{ + struct clksrc_clk *sclk = to_clksrc(clk); + unsigned long parent_rate = clk_get_rate(clk->parent); + int max_div = 1 << sclk->reg_div.size; + int div; + + if (rate >= parent_rate) + rate = parent_rate; + else { + div = parent_rate / rate; + if (parent_rate % rate) + div++; + + if (div == 0) + div = 1; + if (div > max_div) + div = max_div; + + rate = parent_rate / div; + } + + return rate; +} + +/* Clock initialisation code */ + +void __init_or_cpufreq s3c_set_clksrc(struct clksrc_clk *clk, bool announce) +{ + struct clksrc_sources *srcs = clk->sources; + u32 mask = bit_mask(clk->reg_src.shift, clk->reg_src.size); + u32 clksrc; + + if (!clk->reg_src.reg) { + if (!clk->clk.parent) + printk(KERN_ERR "%s: no parent clock specified\n", + clk->clk.name); + return; + } + + clksrc = __raw_readl(clk->reg_src.reg); + clksrc &= mask; + clksrc >>= clk->reg_src.shift; + + if (clksrc > srcs->nr_sources || !srcs->sources[clksrc]) { + printk(KERN_ERR "%s: bad source %d\n", + clk->clk.name, clksrc); + return; + } + + clk->clk.parent = srcs->sources[clksrc]; + + if (announce) + printk(KERN_INFO "%s: source is %s (%d), rate is %ld\n", + clk->clk.name, clk->clk.parent->name, clksrc, + clk_get_rate(&clk->clk)); +} + +static struct clk_ops clksrc_ops = { + .set_parent = s3c_setparent_clksrc, + .get_rate = s3c_getrate_clksrc, + .set_rate = s3c_setrate_clksrc, + .round_rate = s3c_roundrate_clksrc, +}; + +static struct clk_ops clksrc_ops_nodiv = { + .set_parent = s3c_setparent_clksrc, +}; + +static struct clk_ops clksrc_ops_nosrc = { + .get_rate = s3c_getrate_clksrc, + .set_rate = s3c_setrate_clksrc, + .round_rate = s3c_roundrate_clksrc, +}; + +void __init s3c_register_clksrc(struct clksrc_clk *clksrc, int size) +{ + int ret; + + for (; size > 0; size--, clksrc++) { + if (!clksrc->reg_div.reg && !clksrc->reg_src.reg) + printk(KERN_ERR "%s: clock %s has no registers set\n", + __func__, clksrc->clk.name); + + /* fill in the default functions */ + + if (!clksrc->clk.ops) { + if (!clksrc->reg_div.reg) + clksrc->clk.ops = &clksrc_ops_nodiv; + else if (!clksrc->reg_src.reg) + clksrc->clk.ops = &clksrc_ops_nosrc; + else + clksrc->clk.ops = &clksrc_ops; + } + + /* setup the clocksource, but do not announce it + * as it may be re-set by the setup routines + * called after the rest of the clocks have been + * registered + */ + s3c_set_clksrc(clksrc, false); + + ret = s3c24xx_register_clock(&clksrc->clk); + + if (ret < 0) { + printk(KERN_ERR "%s: failed to register %s (%d)\n", + __func__, clksrc->clk.name, ret); + } + } +} diff --git a/arch/arm/plat-s3c/clock.c b/arch/arm/plat-samsung/clock.c index 619cfa82dca..1b25c9d8c40 100644 --- a/arch/arm/plat-s3c/clock.c +++ b/arch/arm/plat-samsung/clock.c @@ -150,8 +150,8 @@ unsigned long clk_get_rate(struct clk *clk) if (clk->rate != 0) return clk->rate; - if (clk->get_rate != NULL) - return (clk->get_rate)(clk); + if (clk->ops != NULL && clk->ops->get_rate != NULL) + return (clk->ops->get_rate)(clk); if (clk->parent != NULL) return clk_get_rate(clk->parent); @@ -161,8 +161,8 @@ unsigned long clk_get_rate(struct clk *clk) long clk_round_rate(struct clk *clk, unsigned long rate) { - if (!IS_ERR(clk) && clk->round_rate) - return (clk->round_rate)(clk, rate); + if (!IS_ERR(clk) && clk->ops && clk->ops->round_rate) + return (clk->ops->round_rate)(clk, rate); return rate; } @@ -178,13 +178,14 @@ int clk_set_rate(struct clk *clk, unsigned long rate) * the clock may have been made this way by choice. */ - WARN_ON(clk->set_rate == NULL); + WARN_ON(clk->ops == NULL); + WARN_ON(clk->ops && clk->ops->set_rate == NULL); - if (clk->set_rate == NULL) + if (clk->ops == NULL || clk->ops->set_rate == NULL) return -EINVAL; spin_lock(&clocks_lock); - ret = (clk->set_rate)(clk, rate); + ret = (clk->ops->set_rate)(clk, rate); spin_unlock(&clocks_lock); return ret; @@ -204,8 +205,8 @@ int clk_set_parent(struct clk *clk, struct clk *parent) spin_lock(&clocks_lock); - if (clk->set_parent) - ret = (clk->set_parent)(clk, parent); + if (clk->ops && clk->ops->set_parent) + ret = (clk->ops->set_parent)(clk, parent); spin_unlock(&clocks_lock); @@ -224,12 +225,16 @@ EXPORT_SYMBOL(clk_set_parent); /* base clocks */ -static int clk_default_setrate(struct clk *clk, unsigned long rate) +int clk_default_setrate(struct clk *clk, unsigned long rate) { clk->rate = rate; return 0; } +struct clk_ops clk_ops_def_setrate = { + .set_rate = clk_default_setrate, +}; + struct clk clk_xtal = { .name = "xtal", .id = -1, @@ -251,7 +256,7 @@ struct clk clk_epll = { struct clk clk_mpll = { .name = "mpll", .id = -1, - .set_rate = clk_default_setrate, + .ops = &clk_ops_def_setrate, }; struct clk clk_upll = { @@ -267,7 +272,6 @@ struct clk clk_f = { .rate = 0, .parent = &clk_mpll, .ctrlbit = 0, - .set_rate = clk_default_setrate, }; struct clk clk_h = { @@ -276,7 +280,7 @@ struct clk clk_h = { .rate = 0, .parent = NULL, .ctrlbit = 0, - .set_rate = clk_default_setrate, + .ops = &clk_ops_def_setrate, }; struct clk clk_p = { @@ -285,7 +289,7 @@ struct clk clk_p = { .rate = 0, .parent = NULL, .ctrlbit = 0, - .set_rate = clk_default_setrate, + .ops = &clk_ops_def_setrate, }; struct clk clk_usb_bus = { @@ -296,7 +300,6 @@ struct clk clk_usb_bus = { }; - struct clk s3c24xx_uclk = { .name = "uclk", .id = -1, @@ -304,6 +307,12 @@ struct clk s3c24xx_uclk = { /* initialise the clock system */ +/** + * s3c24xx_register_clock() - register a clock + * @clk: The clock to register + * + * Add the specified clock to the list of clocks known by the system. + */ int s3c24xx_register_clock(struct clk *clk) { if (clk->enable == NULL) @@ -321,18 +330,52 @@ int s3c24xx_register_clock(struct clk *clk) return 0; } +/** + * s3c24xx_register_clocks() - register an array of clock pointers + * @clks: Pointer to an array of struct clk pointers + * @nr_clks: The number of clocks in the @clks array. + * + * Call s3c24xx_register_clock() for all the clock pointers contained + * in the @clks list. Returns the number of failures. + */ int s3c24xx_register_clocks(struct clk **clks, int nr_clks) { int fails = 0; for (; nr_clks > 0; nr_clks--, clks++) { - if (s3c24xx_register_clock(*clks) < 0) + if (s3c24xx_register_clock(*clks) < 0) { + struct clk *clk = *clks; + printk(KERN_ERR "%s: failed to register %p: %s\n", + __func__, clk, clk->name); fails++; + } } return fails; } +/** + * s3c_register_clocks() - register an array of clocks + * @clkp: Pointer to the first clock in the array. + * @nr_clks: Number of clocks to register. + * + * Call s3c24xx_register_clock() on the @clkp array given, printing an + * error if it fails to register the clock (unlikely). + */ +void __init s3c_register_clocks(struct clk *clkp, int nr_clks) +{ + int ret; + + for (; nr_clks > 0; nr_clks--, clkp++) { + ret = s3c24xx_register_clock(clkp); + + if (ret < 0) { + printk(KERN_ERR "Failed to register clock %s (%d)\n", + clkp->name, ret); + } + } +} + /* initalise all the clocks */ int __init s3c24xx_register_baseclocks(unsigned long xtal) diff --git a/arch/arm/plat-s3c/dev-fb.c b/arch/arm/plat-samsung/dev-fb.c index a90198fc4b0..a90198fc4b0 100644 --- a/arch/arm/plat-s3c/dev-fb.c +++ b/arch/arm/plat-samsung/dev-fb.c diff --git a/arch/arm/plat-s3c/dev-hsmmc.c b/arch/arm/plat-samsung/dev-hsmmc.c index 4c05b39810e..4c05b39810e 100644 --- a/arch/arm/plat-s3c/dev-hsmmc.c +++ b/arch/arm/plat-samsung/dev-hsmmc.c diff --git a/arch/arm/plat-s3c/dev-hsmmc1.c b/arch/arm/plat-samsung/dev-hsmmc1.c index e49bc4cd0ee..e49bc4cd0ee 100644 --- a/arch/arm/plat-s3c/dev-hsmmc1.c +++ b/arch/arm/plat-samsung/dev-hsmmc1.c diff --git a/arch/arm/plat-s3c/dev-hsmmc2.c b/arch/arm/plat-samsung/dev-hsmmc2.c index 824580bc0e0..824580bc0e0 100644 --- a/arch/arm/plat-s3c/dev-hsmmc2.c +++ b/arch/arm/plat-samsung/dev-hsmmc2.c diff --git a/arch/arm/plat-s3c/dev-i2c0.c b/arch/arm/plat-samsung/dev-i2c0.c index 4c761529b94..4c761529b94 100644 --- a/arch/arm/plat-s3c/dev-i2c0.c +++ b/arch/arm/plat-samsung/dev-i2c0.c diff --git a/arch/arm/plat-s3c/dev-i2c1.c b/arch/arm/plat-samsung/dev-i2c1.c index d44f7911050..d44f7911050 100644 --- a/arch/arm/plat-s3c/dev-i2c1.c +++ b/arch/arm/plat-samsung/dev-i2c1.c diff --git a/arch/arm/plat-s3c/dev-nand.c b/arch/arm/plat-samsung/dev-nand.c index a52fb6cf618..a52fb6cf618 100644 --- a/arch/arm/plat-s3c/dev-nand.c +++ b/arch/arm/plat-samsung/dev-nand.c diff --git a/arch/arm/plat-samsung/dev-uart.c b/arch/arm/plat-samsung/dev-uart.c new file mode 100644 index 00000000000..3776cd95245 --- /dev/null +++ b/arch/arm/plat-samsung/dev-uart.c @@ -0,0 +1,44 @@ +/* linux/arch/arm/plat-samsung/dev-uart.c + * originally from arch/arm/plat-s3c24xx/devs.c + *x + * Copyright (c) 2004 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Base S3C24XX platform device definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + +#include <linux/kernel.h> +#include <linux/platform_device.h> + +/* uart devices */ + +static struct platform_device s3c24xx_uart_device0 = { + .id = 0, +}; + +static struct platform_device s3c24xx_uart_device1 = { + .id = 1, +}; + +static struct platform_device s3c24xx_uart_device2 = { + .id = 2, +}; + +static struct platform_device s3c24xx_uart_device3 = { + .id = 3, +}; + +struct platform_device *s3c24xx_uart_src[4] = { + &s3c24xx_uart_device0, + &s3c24xx_uart_device1, + &s3c24xx_uart_device2, + &s3c24xx_uart_device3, +}; + +struct platform_device *s3c24xx_uart_devs[4] = { +}; diff --git a/arch/arm/plat-s3c/dev-usb-hsotg.c b/arch/arm/plat-samsung/dev-usb-hsotg.c index e2f604b51c8..33a844ab691 100644 --- a/arch/arm/plat-s3c/dev-usb-hsotg.c +++ b/arch/arm/plat-samsung/dev-usb-hsotg.c @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/string.h> #include <linux/platform_device.h> +#include <linux/dma-mapping.h> #include <mach/irqs.h> #include <mach/map.h> @@ -33,9 +34,15 @@ static struct resource s3c_usb_hsotg_resources[] = { }, }; +static u64 s3c_hsotg_dmamask = DMA_BIT_MASK(32); + struct platform_device s3c_device_usb_hsotg = { .name = "s3c-hsotg", .id = -1, .num_resources = ARRAY_SIZE(s3c_usb_hsotg_resources), .resource = s3c_usb_hsotg_resources, + .dev = { + .dma_mask = &s3c_hsotg_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, }; diff --git a/arch/arm/plat-s3c/dev-usb.c b/arch/arm/plat-samsung/dev-usb.c index 2ee85abed6d..88165657fa5 100644 --- a/arch/arm/plat-s3c/dev-usb.c +++ b/arch/arm/plat-samsung/dev-usb.c @@ -19,7 +19,7 @@ #include <mach/map.h> #include <plat/devs.h> - +#include <plat/usb-control.h> static struct resource s3c_usb_resource[] = { [0] = { @@ -36,7 +36,7 @@ static struct resource s3c_usb_resource[] = { static u64 s3c_device_usb_dmamask = 0xffffffffUL; -struct platform_device s3c_device_usb = { +struct platform_device s3c_device_ohci = { .name = "s3c2410-ohci", .id = -1, .num_resources = ARRAY_SIZE(s3c_usb_resource), @@ -47,4 +47,23 @@ struct platform_device s3c_device_usb = { } }; -EXPORT_SYMBOL(s3c_device_usb); +EXPORT_SYMBOL(s3c_device_ohci); + +/** + * s3c_ohci_set_platdata - initialise OHCI device platform data + * @info: The platform data. + * + * This call copies the @info passed in and sets the device .platform_data + * field to that copy. The @info is copied so that the original can be marked + * __initdata. + */ +void __init s3c_ohci_set_platdata(struct s3c2410_hcd_info *info) +{ + struct s3c2410_hcd_info *npd; + + npd = kmemdup(info, sizeof(struct s3c2410_hcd_info), GFP_KERNEL); + if (!npd) + printk(KERN_ERR "%s: no memory for platform data\n", __func__); + + s3c_device_ohci.dev.platform_data = npd; +} diff --git a/arch/arm/plat-s3c/dma.c b/arch/arm/plat-samsung/dma.c index a995850cd9d..cb459dd9545 100644 --- a/arch/arm/plat-s3c/dma.c +++ b/arch/arm/plat-samsung/dma.c @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s3c/dma.c +/* linux/arch/arm/plat-samsung/dma.c * * Copyright (c) 2003-2009 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> @@ -20,8 +20,6 @@ struct s3c2410_dma_buf; #include <mach/dma.h> #include <mach/irqs.h> -#include <plat/dma-plat.h> - /* dma channel state information */ struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS]; struct s3c2410_dma_chan *s3c_dma_chan_map[DMACH_MAX]; diff --git a/arch/arm/plat-s3c/gpio-config.c b/arch/arm/plat-samsung/gpio-config.c index 456969b6fa0..44a84e89654 100644 --- a/arch/arm/plat-s3c/gpio-config.c +++ b/arch/arm/plat-samsung/gpio-config.c @@ -17,7 +17,7 @@ #include <linux/gpio.h> #include <linux/io.h> -#include <mach/gpio-core.h> +#include <plat/gpio-core.h> #include <plat/gpio-cfg.h> #include <plat/gpio-cfg-helpers.h> diff --git a/arch/arm/plat-s3c/gpio.c b/arch/arm/plat-samsung/gpio.c index 5ff24e0f9f8..28d2ab8a08d 100644 --- a/arch/arm/plat-s3c/gpio.c +++ b/arch/arm/plat-samsung/gpio.c @@ -16,7 +16,7 @@ #include <linux/io.h> #include <linux/gpio.h> -#include <mach/gpio-core.h> +#include <plat/gpio-core.h> #ifdef CONFIG_S3C_GPIO_TRACK struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END]; diff --git a/arch/arm/plat-samsung/gpiolib.c b/arch/arm/plat-samsung/gpiolib.c new file mode 100644 index 00000000000..8a8ba8bc1d9 --- /dev/null +++ b/arch/arm/plat-samsung/gpiolib.c @@ -0,0 +1,199 @@ +/* arch/arm/plat-samsung/gpiolib.c + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * SAMSUNG - GPIOlib support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <mach/gpio.h> +#include <plat/gpio-core.h> +#include <plat/gpio-cfg.h> +#include <plat/gpio-cfg-helpers.h> + +#ifndef DEBUG_GPIO +#define gpio_dbg(x...) do { } while (0) +#else +#define gpio_dbg(x...) printk(KERN_DEBUG x) +#endif + +/* The samsung_gpiolib_4bit routines are to control the gpio banks where + * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the + * following example: + * + * base + 0x00: Control register, 4 bits per gpio + * gpio n: 4 bits starting at (4*n) + * 0000 = input, 0001 = output, others mean special-function + * base + 0x04: Data register, 1 bit per gpio + * bit n: data bit n + * + * Note, since the data register is one bit per gpio and is at base + 0x4 + * we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of + * the output. +*/ + +static int samsung_gpiolib_4bit_input(struct gpio_chip *chip, + unsigned int offset) +{ + struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); + void __iomem *base = ourchip->base; + unsigned long con; + + con = __raw_readl(base + GPIOCON_OFF); + con &= ~(0xf << con_4bit_shift(offset)); + __raw_writel(con, base + GPIOCON_OFF); + + gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con); + + return 0; +} + +static int samsung_gpiolib_4bit_output(struct gpio_chip *chip, + unsigned int offset, int value) +{ + struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); + void __iomem *base = ourchip->base; + unsigned long con; + unsigned long dat; + + con = __raw_readl(base + GPIOCON_OFF); + con &= ~(0xf << con_4bit_shift(offset)); + con |= 0x1 << con_4bit_shift(offset); + + dat = __raw_readl(base + GPIODAT_OFF); + + if (value) + dat |= 1 << offset; + else + dat &= ~(1 << offset); + + __raw_writel(dat, base + GPIODAT_OFF); + __raw_writel(con, base + GPIOCON_OFF); + __raw_writel(dat, base + GPIODAT_OFF); + + gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat); + + return 0; +} + +/* The next set of routines are for the case where the GPIO configuration + * registers are 4 bits per GPIO but there is more than one register (the + * bank has more than 8 GPIOs. + * + * This case is the similar to the 4 bit case, but the registers are as + * follows: + * + * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs) + * gpio n: 4 bits starting at (4*n) + * 0000 = input, 0001 = output, others mean special-function + * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs) + * gpio n: 4 bits starting at (4*n) + * 0000 = input, 0001 = output, others mean special-function + * base + 0x08: Data register, 1 bit per gpio + * bit n: data bit n + * + * To allow us to use the s3c_gpiolib_get and s3c_gpiolib_set routines we + * store the 'base + 0x4' address so that these routines see the data + * register at ourchip->base + 0x04. + */ + +static int samsung_gpiolib_4bit2_input(struct gpio_chip *chip, + unsigned int offset) +{ + struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); + void __iomem *base = ourchip->base; + void __iomem *regcon = base; + unsigned long con; + + if (offset > 7) + offset -= 8; + else + regcon -= 4; + + con = __raw_readl(regcon); + con &= ~(0xf << con_4bit_shift(offset)); + __raw_writel(con, regcon); + + gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con); + + return 0; +} + +static int samsung_gpiolib_4bit2_output(struct gpio_chip *chip, + unsigned int offset, int value) +{ + struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); + void __iomem *base = ourchip->base; + void __iomem *regcon = base; + unsigned long con; + unsigned long dat; + unsigned con_offset = offset; + + if (con_offset > 7) + con_offset -= 8; + else + regcon -= 4; + + con = __raw_readl(regcon); + con &= ~(0xf << con_4bit_shift(con_offset)); + con |= 0x1 << con_4bit_shift(con_offset); + + dat = __raw_readl(base + GPIODAT_OFF); + + if (value) + dat |= 1 << offset; + else + dat &= ~(1 << offset); + + __raw_writel(dat, base + GPIODAT_OFF); + __raw_writel(con, regcon); + __raw_writel(dat, base + GPIODAT_OFF); + + gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat); + + return 0; +} + +void __init samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip) +{ + chip->chip.direction_input = samsung_gpiolib_4bit_input; + chip->chip.direction_output = samsung_gpiolib_4bit_output; + chip->pm = __gpio_pm(&s3c_gpio_pm_4bit); +} + +void __init samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip) +{ + chip->chip.direction_input = samsung_gpiolib_4bit2_input; + chip->chip.direction_output = samsung_gpiolib_4bit2_output; + chip->pm = __gpio_pm(&s3c_gpio_pm_4bit); +} + +void __init samsung_gpiolib_add_4bit_chips(struct s3c_gpio_chip *chip, + int nr_chips) +{ + for (; nr_chips > 0; nr_chips--, chip++) { + samsung_gpiolib_add_4bit(chip); + s3c_gpiolib_add(chip); + } +} + +void __init samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip, + int nr_chips) +{ + for (; nr_chips > 0; nr_chips--, chip++) { + samsung_gpiolib_add_4bit2(chip); + s3c_gpiolib_add(chip); + } +} diff --git a/arch/arm/plat-s3c/include/plat/adc.h b/arch/arm/plat-samsung/include/plat/adc.h index 5f3b1cd53b9..e8382c7be10 100644 --- a/arch/arm/plat-s3c/include/plat/adc.h +++ b/arch/arm/plat-samsung/include/plat/adc.h @@ -1,10 +1,10 @@ -/* arch/arm/plat-s3c/include/plat/adc.h +/* arch/arm/plat-samsung/include/plat/adc.h * * Copyright (c) 2008 Simtec Electronics * http://armlinux.simnte.co.uk/ * Ben Dooks <ben@simtec.co.uk> * - * S3C24XX ADC driver information + * S3C ADC driver information * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/plat-s3c/include/plat/audio.h b/arch/arm/plat-samsung/include/plat/audio.h index f22d23bb627..e32f9edfd4b 100644 --- a/arch/arm/plat-s3c/include/plat/audio.h +++ b/arch/arm/plat-samsung/include/plat/audio.h @@ -1,4 +1,4 @@ -/* arch/arm/plat-s3c/include/plat/audio.h +/* arch/arm/plat-samsung/include/plat/audio.h * * Copyright (c) 2009 Samsung Electronics Co. Ltd * Author: Jaswinder Singh <jassi.brar@samsung.com> @@ -8,6 +8,14 @@ * published by the Free Software Foundation. */ +/* The machine init code calls s3c*_ac97_setup_gpio with + * one of these defines in order to select appropriate bank + * of GPIO for AC97 pins + */ +#define S3C64XX_AC97_GPD 0 +#define S3C64XX_AC97_GPE 1 +extern void s3c64xx_ac97_setup_gpio(int); + /** * struct s3c_audio_pdata - common platform data for audio device drivers * @cfg_gpio: Callback function to setup mux'ed pins in I2S/PCM/AC97 mode diff --git a/arch/arm/plat-samsung/include/plat/clock-clksrc.h b/arch/arm/plat-samsung/include/plat/clock-clksrc.h new file mode 100644 index 00000000000..50a8ca7c376 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/clock-clksrc.h @@ -0,0 +1,83 @@ +/* linux/arch/arm/plat-samsung/include/plat/clock-clksrc.h + * + * Parts taken from arch/arm/plat-s3c64xx/clock.c + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * Copyright 2009 Ben Dooks <ben-linux@fluff.org> + * Copyright 2009 Harald Welte + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/** + * struct clksrc_sources - list of sources for a given clock + * @sources: array of pointers to clocks + * @nr_sources: The size of @sources + */ +struct clksrc_sources { + unsigned int nr_sources; + struct clk **sources; +}; + +/** + * struct clksrc_reg - register definition for clock control bits + * @reg: pointer to the register in virtual memory. + * @shift: the shift in bits to where the bitfield is. + * @size: the size in bits of the bitfield. + * + * This specifies the size and position of the bits we are interested + * in within the register specified by @reg. + */ +struct clksrc_reg { + void __iomem *reg; + unsigned short shift; + unsigned short size; +}; + +/** + * struct clksrc_clk - class of clock for newer style samsung devices. + * @clk: the standard clock representation + * @sources: the sources for this clock + * @reg_src: the register definition for selecting the clock's source + * @reg_div: the register definition for the clock's output divisor + * + * This clock implements the features required by the newer SoCs where + * the standard clock block provides an input mux and a post-mux divisor + * to provide the periperhal's clock. + * + * The array of @sources provides the mapping of mux position to the + * clock, and @reg_src shows the code where to modify to change the mux + * position. The @reg_div defines how to change the divider settings on + * the output. + */ +struct clksrc_clk { + struct clk clk; + struct clksrc_sources *sources; + + struct clksrc_reg reg_src; + struct clksrc_reg reg_div; +}; + +/** + * s3c_set_clksrc() - setup the clock from the register settings + * @clk: The clock to setup. + * @announce: true to announce the setting to printk(). + * + * Setup the clock from the current register settings, for when the + * kernel boots or if it is resuming from a possibly unknown state. + */ +extern void s3c_set_clksrc(struct clksrc_clk *clk, bool announce); + +/** + * s3c_register_clksrc() register clocks from an array of clksrc clocks + * @srcs: The array of clocks to register + * @size: The size of the @srcs array. + * + * Initialise and register the array of clocks described by @srcs. + */ +extern void s3c_register_clksrc(struct clksrc_clk *srcs, int size); diff --git a/arch/arm/plat-s3c/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h index d86af84b5b8..60b62692ac7 100644 --- a/arch/arm/plat-s3c/include/plat/clock.h +++ b/arch/arm/plat-samsung/include/plat/clock.h @@ -11,6 +11,30 @@ #include <linux/spinlock.h> +struct clk; + +/** + * struct clk_ops - standard clock operations + * @set_rate: set the clock rate, see clk_set_rate(). + * @get_rate: get the clock rate, see clk_get_rate(). + * @round_rate: round a given clock rate, see clk_round_rate(). + * @set_parent: set the clock's parent, see clk_set_parent(). + * + * Group the common clock implementations together so that we + * don't have to keep setting the same fiels again. We leave + * enable in struct clk. + * + * Adding an extra layer of indirection into the process should + * not be a problem as it is unlikely these operations are going + * to need to be called quickly. + */ +struct clk_ops { + int (*set_rate)(struct clk *c, unsigned long rate); + unsigned long (*get_rate)(struct clk *c); + unsigned long (*round_rate)(struct clk *c, unsigned long rate); + int (*set_parent)(struct clk *c, struct clk *parent); +}; + struct clk { struct list_head list; struct module *owner; @@ -21,11 +45,8 @@ struct clk { unsigned long rate; unsigned long ctrlbit; + struct clk_ops *ops; int (*enable)(struct clk *, int enable); - int (*set_rate)(struct clk *c, unsigned long rate); - unsigned long (*get_rate)(struct clk *c); - unsigned long (*round_rate)(struct clk *c, unsigned long rate); - int (*set_parent)(struct clk *c, struct clk *parent); }; /* other clocks which may be registered by board support */ @@ -54,6 +75,9 @@ extern struct clk clk_h2; extern struct clk clk_27m; extern struct clk clk_48m; +extern int clk_default_setrate(struct clk *clk, unsigned long rate); +extern struct clk_ops clk_ops_def_setrate; + /* exports for arch/arm/mach-s3c2410 * * Please DO NOT use these outside of arch/arm/mach-s3c2410 @@ -66,9 +90,11 @@ extern int s3c2410_clkcon_enable(struct clk *clk, int enable); extern int s3c24xx_register_clock(struct clk *clk); extern int s3c24xx_register_clocks(struct clk **clk, int nr_clks); +extern void s3c_register_clocks(struct clk *clk, int nr_clks); + extern int s3c24xx_register_baseclocks(unsigned long xtal); -extern void s3c64xx_register_clocks(void); +extern void s5p_register_clocks(unsigned long xtal_freq); extern void s3c24xx_setup_clocks(unsigned long fclk, unsigned long hclk, diff --git a/arch/arm/plat-s3c/include/plat/cpu-freq.h b/arch/arm/plat-samsung/include/plat/cpu-freq.h index 94eb06a2ea5..80c4a809c72 100644 --- a/arch/arm/plat-s3c/include/plat/cpu-freq.h +++ b/arch/arm/plat-samsung/include/plat/cpu-freq.h @@ -1,4 +1,4 @@ -/* arch/arm/plat-s3c/include/plat/cpu-freq.h +/* arch/arm/plat-samsung/include/plat/cpu-freq.h * * Copyright (c) 2006-2007 Simtec Electronics * http://armlinux.simtec.co.uk/ diff --git a/arch/arm/plat-s3c/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h index d1131ca11e9..d316b4a579f 100644 --- a/arch/arm/plat-s3c/include/plat/cpu.h +++ b/arch/arm/plat-samsung/include/plat/cpu.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s3c/include/plat/cpu.h +/* linux/arch/arm/plat-samsung/include/plat/cpu.h * * Copyright (c) 2004-2005 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> @@ -48,9 +48,12 @@ extern void s3c_init_cpu(unsigned long idcode, extern void s3c24xx_init_irq(void); extern void s3c64xx_init_irq(u32 vic0, u32 vic1); +extern void s5p_init_irq(u32 *vic, u32 num_vic); extern void s3c24xx_init_io(struct map_desc *mach_desc, int size); extern void s3c64xx_init_io(struct map_desc *mach_desc, int size); +extern void s5p_init_io(struct map_desc *mach_desc, + int size, void __iomem *cpuid_addr); extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no); diff --git a/arch/arm/plat-s3c/include/plat/debug-macro.S b/arch/arm/plat-samsung/include/plat/debug-macro.S index 3634d4e3708..dc6efd90e8f 100644 --- a/arch/arm/plat-s3c/include/plat/debug-macro.S +++ b/arch/arm/plat-samsung/include/plat/debug-macro.S @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/plat-s3c/debug-macro.S +/* arch/arm/plat-samsung/include/plat/debug-macro.S * * Copyright 2005, 2007 Simtec Electronics * http://armlinux.simtec.co.uk/ @@ -11,6 +11,18 @@ #include <plat/regs-serial.h> +/* The S5PV210/S5PC110 and S5P6442 implementations are as belows. */ + + .macro fifo_level_s5pv210 rd, rx + ldr \rd, [ \rx, # S3C2410_UFSTAT ] + and \rd, \rd, #S5PV210_UFSTAT_TXMASK + .endm + + .macro fifo_full_s5pv210 rd, rx + ldr \rd, [ \rx, # S3C2410_UFSTAT ] + tst \rd, #S5PV210_UFSTAT_TXFULL + .endm + /* The S3C2440 implementations are used by default as they are the * most widely re-used */ diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index c1c20b02391..796d2425831 100644 --- a/arch/arm/plat-s3c/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/plat-s3c24xx/devs.h +/* arch/arm/plat-samsung/include/plat/devs.h * * Copyright (c) 2004 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> @@ -18,6 +18,7 @@ struct s3c24xx_uart_resources { extern struct s3c24xx_uart_resources s3c2410_uart_resources[]; extern struct s3c24xx_uart_resources s3c64xx_uart_resources[]; +extern struct s3c24xx_uart_resources s5p_uart_resources[]; extern struct platform_device *s3c24xx_uart_devs[]; extern struct platform_device *s3c24xx_uart_src[]; @@ -28,12 +29,18 @@ extern struct platform_device s3c64xx_device_iis0; extern struct platform_device s3c64xx_device_iis1; extern struct platform_device s3c64xx_device_iisv4; +extern struct platform_device s3c64xx_device_spi0; +extern struct platform_device s3c64xx_device_spi1; + extern struct platform_device s3c64xx_device_pcm0; extern struct platform_device s3c64xx_device_pcm1; +extern struct platform_device s3c64xx_device_ac97; + extern struct platform_device s3c_device_ts; + extern struct platform_device s3c_device_fb; -extern struct platform_device s3c_device_usb; +extern struct platform_device s3c_device_ohci; extern struct platform_device s3c_device_lcd; extern struct platform_device s3c_device_wdt; extern struct platform_device s3c_device_i2c0; diff --git a/arch/arm/plat-s3c/include/plat/dma-core.h b/arch/arm/plat-samsung/include/plat/dma-core.h index 32ff2a92cb3..32ff2a92cb3 100644 --- a/arch/arm/plat-s3c/include/plat/dma-core.h +++ b/arch/arm/plat-samsung/include/plat/dma-core.h diff --git a/arch/arm/plat-s3c24xx/include/plat/dma-plat.h b/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h index 9565ead1bc9..336d5ac0203 100644 --- a/arch/arm/plat-s3c24xx/include/plat/dma-plat.h +++ b/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h @@ -1,9 +1,9 @@ -/* linux/arch/arm/plat-s3c24xx/include/plat/dma-plat.h +/* linux/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h * * Copyright (C) 2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * - * Samsung S3C24XX DMA support + * Samsung S3C24XX DMA support - per SoC functions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/plat-s3c/include/plat/dma.h b/arch/arm/plat-samsung/include/plat/dma.h index e429d10be3a..7584d751ed5 100644 --- a/arch/arm/plat-s3c/include/plat/dma.h +++ b/arch/arm/plat-samsung/include/plat/dma.h @@ -1,4 +1,4 @@ -/* arch/arm/plat-s3c/include/plat/dma.h +/* arch/arm/plat-samsung/include/plat/dma.h * * Copyright (C) 2003-2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> diff --git a/arch/arm/plat-s3c/include/plat/fb.h b/arch/arm/plat-samsung/include/plat/fb.h index f8db87930f8..ffc01a76b7c 100644 --- a/arch/arm/plat-s3c/include/plat/fb.h +++ b/arch/arm/plat-samsung/include/plat/fb.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s3c/include/plat/fb.h +/* arch/arm/plat-samsung/include/plat/fb.h * * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics diff --git a/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h index 652e2bbdaa2..652e2bbdaa2 100644 --- a/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h diff --git a/arch/arm/plat-s3c/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h index 29cd6a86cad..29cd6a86cad 100644 --- a/arch/arm/plat-s3c/include/plat/gpio-cfg.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h diff --git a/arch/arm/plat-s3c/include/plat/gpio-core.h b/arch/arm/plat-samsung/include/plat/gpio-core.h index 32af612767a..49ff406a706 100644 --- a/arch/arm/plat-s3c/include/plat/gpio-core.h +++ b/arch/arm/plat-samsung/include/plat/gpio-core.h @@ -11,6 +11,11 @@ * published by the Free Software Foundation. */ +#define GPIOCON_OFF (0x00) +#define GPIODAT_OFF (0x04) + +#define con_4bit_shift(__off) ((__off) * 4) + /* Define the core gpiolib support functions that the s3c platforms may * need to extend or change depending on the hardware and the s3c chip * selected at build or found at run time. @@ -80,6 +85,29 @@ extern void s3c_gpiolib_add(struct s3c_gpio_chip *chip); * and any other necessary functions. */ +/** + * samsung_gpiolib_add_4bit_chips - 4bit single register GPIO config. + * @chip: The gpio chip that is being configured. + * @nr_chips: The no of chips (gpio ports) for the GPIO being configured. + * + * This helper deal with the GPIO cases where the control register has 4 bits + * of control per GPIO, generally in the form of: + * 0000 = Input + * 0001 = Output + * others = Special functions (dependant on bank) + * + * Note, since the code to deal with the case where there are two control + * registers instead of one, we do not have a seperate set of function + * (samsung_gpiolib_add_4bit2_chips)for each case. + */ +extern void samsung_gpiolib_add_4bit_chips(struct s3c_gpio_chip *chip, + int nr_chips); +extern void samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip, + int nr_chips); + +extern void samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip); +extern void samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip); + #ifdef CONFIG_S3C_GPIO_TRACK extern struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END]; @@ -90,6 +118,8 @@ static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int chip) #else /* machine specific code should provide s3c_gpiolib_getchip */ +#include <mach/gpio-track.h> + static inline void s3c_gpiolib_track(struct s3c_gpio_chip *chip) { } #endif diff --git a/arch/arm/plat-s3c/include/plat/hwmon.h b/arch/arm/plat-samsung/include/plat/hwmon.h index 1ba88ea0aa3..1ba88ea0aa3 100644 --- a/arch/arm/plat-s3c/include/plat/hwmon.h +++ b/arch/arm/plat-samsung/include/plat/hwmon.h diff --git a/arch/arm/plat-s3c/include/plat/iic-core.h b/arch/arm/plat-samsung/include/plat/iic-core.h index 36397ca2096..36397ca2096 100644 --- a/arch/arm/plat-s3c/include/plat/iic-core.h +++ b/arch/arm/plat-samsung/include/plat/iic-core.h diff --git a/arch/arm/plat-s3c/include/plat/iic.h b/arch/arm/plat-samsung/include/plat/iic.h index 3083df00dee..3083df00dee 100644 --- a/arch/arm/plat-s3c/include/plat/iic.h +++ b/arch/arm/plat-samsung/include/plat/iic.h diff --git a/arch/arm/plat-samsung/include/plat/irq-uart.h b/arch/arm/plat-samsung/include/plat/irq-uart.h new file mode 100644 index 00000000000..a9331e49bea --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/irq-uart.h @@ -0,0 +1,20 @@ +/* arch/arm/plat-samsung/include/plat/irq-uart.h + * + * Copyright (c) 2010 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Header file for Samsung SoC UART IRQ demux for S3C64XX and later + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +struct s3c_uart_irq { + void __iomem *regs; + unsigned int base_irq; + unsigned int parent_irq; +}; + +extern void s3c_init_uart_irqs(struct s3c_uart_irq *irq, unsigned int nr_irqs); + diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2442.h b/arch/arm/plat-samsung/include/plat/irq-vic-timer.h index 451a23a2092..a90b53431b5 100644 --- a/arch/arm/plat-s3c24xx/include/plat/s3c2442.h +++ b/arch/arm/plat-samsung/include/plat/irq-vic-timer.h @@ -1,17 +1,13 @@ -/* linux/include/asm-arm/plat-s3c24xx/s3c2442.h +/* arch/arm/plat-samsung/include/plat/irq-vic-timer.h * - * Copyright (c) 2006 Simtec Electronics + * Copyright (c) 2010 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * - * Header file for s3c2442 cpu support + * Header file for Samsung SoC IRQ VIC timer * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#ifdef CONFIG_CPU_S3C2442 -extern int s3c2442_init(void); -#else -#define s3c2442_init NULL -#endif +extern void s3c_init_vic_timer_irq(unsigned int vic, unsigned int timer); diff --git a/arch/arm/plat-s3c/include/plat/map-base.h b/arch/arm/plat-samsung/include/plat/map-base.h index 250be311c85..250be311c85 100644 --- a/arch/arm/plat-s3c/include/plat/map-base.h +++ b/arch/arm/plat-samsung/include/plat/map-base.h diff --git a/arch/arm/plat-s3c/include/plat/nand.h b/arch/arm/plat-samsung/include/plat/nand.h index 226147b7e02..226147b7e02 100644 --- a/arch/arm/plat-s3c/include/plat/nand.h +++ b/arch/arm/plat-samsung/include/plat/nand.h diff --git a/arch/arm/plat-s3c/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h index 7a797192fcf..245836d9193 100644 --- a/arch/arm/plat-s3c/include/plat/pm.h +++ b/arch/arm/plat-samsung/include/plat/pm.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/plat-s3c24xx/pm.h +/* arch/arm/plat-samsung/include/plat/pm.h * * Copyright (c) 2004 Simtec Electronics * http://armlinux.simtec.co.uk/ @@ -111,7 +111,7 @@ extern int s3c24xx_irq_resume(struct sys_device *dev); /* PM debug functions */ -#ifdef CONFIG_S3C2410_PM_DEBUG +#ifdef CONFIG_SAMSUNG_PM_DEBUG /** * s3c_pm_dbg() - low level debug function for use in suspend/resume. * @msg: The message to print. @@ -141,7 +141,7 @@ static inline void s3c_pm_debug_smdkled(u32 set, u32 clear) { } /* suspend memory checking */ -#ifdef CONFIG_S3C2410_PM_CHECK +#ifdef CONFIG_SAMSUNG_PM_CHECK extern void s3c_pm_check_prepare(void); extern void s3c_pm_check_restore(void); extern void s3c_pm_check_cleanup(void); diff --git a/arch/arm/plat-s3c/include/plat/regs-ac97.h b/arch/arm/plat-samsung/include/plat/regs-ac97.h index c3878f7acb8..c3878f7acb8 100644 --- a/arch/arm/plat-s3c/include/plat/regs-ac97.h +++ b/arch/arm/plat-samsung/include/plat/regs-ac97.h diff --git a/arch/arm/plat-s3c/include/plat/regs-adc.h b/arch/arm/plat-samsung/include/plat/regs-adc.h index 4323cccc86c..7554c4fcddb 100644 --- a/arch/arm/plat-s3c/include/plat/regs-adc.h +++ b/arch/arm/plat-samsung/include/plat/regs-adc.h @@ -19,9 +19,13 @@ #define S3C2410_ADCDLY S3C2410_ADCREG(0x08) #define S3C2410_ADCDAT0 S3C2410_ADCREG(0x0C) #define S3C2410_ADCDAT1 S3C2410_ADCREG(0x10) +#define S3C64XX_ADCUPDN S3C2410_ADCREG(0x14) +#define S3C64XX_ADCCLRINT S3C2410_ADCREG(0x18) +#define S3C64XX_ADCCLRINTPNDNUP S3C2410_ADCREG(0x20) /* ADCCON Register Bits */ +#define S3C64XX_ADCCON_RESSEL (1<<16) #define S3C2410_ADCCON_ECFLG (1<<15) #define S3C2410_ADCCON_PRSCEN (1<<14) #define S3C2410_ADCCON_PRSCVL(x) (((x)&0xFF)<<6) diff --git a/arch/arm/plat-s3c/include/plat/regs-fb-v4.h b/arch/arm/plat-samsung/include/plat/regs-fb-v4.h index a60ed0d06c9..0f43599248a 100644 --- a/arch/arm/plat-s3c/include/plat/regs-fb-v4.h +++ b/arch/arm/plat-samsung/include/plat/regs-fb-v4.h @@ -1,4 +1,4 @@ -/* arch/arm/plat-s3c/include/plat/regs-fb-v4.h +/* arch/arm/plat-samsung/include/plat/regs-fb-v4.h * * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics diff --git a/arch/arm/plat-s3c/include/plat/regs-fb.h b/arch/arm/plat-samsung/include/plat/regs-fb.h index e9ee599d430..0ef806e5034 100644 --- a/arch/arm/plat-s3c/include/plat/regs-fb.h +++ b/arch/arm/plat-samsung/include/plat/regs-fb.h @@ -1,4 +1,4 @@ -/* arch/arm/plat-s3c/include/plat/regs-fb.h +/* arch/arm/plat-samsung/include/plat/regs-fb.h * * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics diff --git a/arch/arm/plat-s3c/include/plat/regs-iic.h b/arch/arm/plat-samsung/include/plat/regs-iic.h index 2f7c17de8ac..2f7c17de8ac 100644 --- a/arch/arm/plat-s3c/include/plat/regs-iic.h +++ b/arch/arm/plat-samsung/include/plat/regs-iic.h diff --git a/arch/arm/plat-s3c/include/plat/regs-irqtype.h b/arch/arm/plat-samsung/include/plat/regs-irqtype.h index c63cd3fc5ad..c63cd3fc5ad 100644 --- a/arch/arm/plat-s3c/include/plat/regs-irqtype.h +++ b/arch/arm/plat-samsung/include/plat/regs-irqtype.h diff --git a/arch/arm/plat-s3c/include/plat/regs-nand.h b/arch/arm/plat-samsung/include/plat/regs-nand.h index 238efea7b9e..238efea7b9e 100644 --- a/arch/arm/plat-s3c/include/plat/regs-nand.h +++ b/arch/arm/plat-samsung/include/plat/regs-nand.h diff --git a/arch/arm/plat-s3c/include/plat/regs-rtc.h b/arch/arm/plat-samsung/include/plat/regs-rtc.h index d5837cf8e40..d5837cf8e40 100644 --- a/arch/arm/plat-s3c/include/plat/regs-rtc.h +++ b/arch/arm/plat-samsung/include/plat/regs-rtc.h diff --git a/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h b/arch/arm/plat-samsung/include/plat/regs-s3c2412-iis.h index abf2fbc2eb2..abf2fbc2eb2 100644 --- a/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h +++ b/arch/arm/plat-samsung/include/plat/regs-s3c2412-iis.h diff --git a/arch/arm/plat-s3c/include/plat/regs-sdhci.h b/arch/arm/plat-samsung/include/plat/regs-sdhci.h index e34049ad44c..e34049ad44c 100644 --- a/arch/arm/plat-s3c/include/plat/regs-sdhci.h +++ b/arch/arm/plat-samsung/include/plat/regs-sdhci.h diff --git a/arch/arm/plat-s3c/include/plat/regs-serial.h b/arch/arm/plat-samsung/include/plat/regs-serial.h index 85d8904e7f2..a6eba8496b2 100644 --- a/arch/arm/plat-s3c/include/plat/regs-serial.h +++ b/arch/arm/plat-samsung/include/plat/regs-serial.h @@ -1,4 +1,4 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-serial.h +/* arch/arm/plat-samsung/include/plat/regs-serial.h * * From linux/include/asm-arm/hardware/serial_s3c2410.h * @@ -194,6 +194,36 @@ #define S3C64XX_UINTSP 0x34 #define S3C64XX_UINTM 0x38 +/* Following are specific to S5PV210 and S5P6442 */ +#define S5PV210_UCON_CLKMASK (1<<10) +#define S5PV210_UCON_PCLK (0<<10) +#define S5PV210_UCON_UCLK (1<<10) + +#define S5PV210_UFCON_TXTRIG0 (0<<8) +#define S5PV210_UFCON_TXTRIG4 (1<<8) +#define S5PV210_UFCON_TXTRIG8 (2<<8) +#define S5PV210_UFCON_TXTRIG16 (3<<8) +#define S5PV210_UFCON_TXTRIG32 (4<<8) +#define S5PV210_UFCON_TXTRIG64 (5<<8) +#define S5PV210_UFCON_TXTRIG128 (6<<8) +#define S5PV210_UFCON_TXTRIG256 (7<<8) + +#define S5PV210_UFCON_RXTRIG1 (0<<4) +#define S5PV210_UFCON_RXTRIG4 (1<<4) +#define S5PV210_UFCON_RXTRIG8 (2<<4) +#define S5PV210_UFCON_RXTRIG16 (3<<4) +#define S5PV210_UFCON_RXTRIG32 (4<<4) +#define S5PV210_UFCON_RXTRIG64 (5<<4) +#define S5PV210_UFCON_RXTRIG128 (6<<4) +#define S5PV210_UFCON_RXTRIG256 (7<<4) + +#define S5PV210_UFSTAT_TXFULL (1<<24) +#define S5PV210_UFSTAT_RXFULL (1<<8) +#define S5PV210_UFSTAT_TXMASK (255<<16) +#define S5PV210_UFSTAT_TXSHIFT (16) +#define S5PV210_UFSTAT_RXMASK (255<<0) +#define S5PV210_UFSTAT_RXSHIFT (0) + #ifndef __ASSEMBLY__ /* struct s3c24xx_uart_clksrc diff --git a/arch/arm/plat-s3c/include/plat/regs-timer.h b/arch/arm/plat-samsung/include/plat/regs-timer.h index d097d92f8cc..d097d92f8cc 100644 --- a/arch/arm/plat-s3c/include/plat/regs-timer.h +++ b/arch/arm/plat-samsung/include/plat/regs-timer.h diff --git a/arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h b/arch/arm/plat-samsung/include/plat/regs-usb-hsotg-phy.h index 36a85f5000c..36a85f5000c 100644 --- a/arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h +++ b/arch/arm/plat-samsung/include/plat/regs-usb-hsotg-phy.h diff --git a/arch/arm/plat-s3c/include/plat/regs-usb-hsotg.h b/arch/arm/plat-samsung/include/plat/regs-usb-hsotg.h index 8d18d9d4d14..8d18d9d4d14 100644 --- a/arch/arm/plat-s3c/include/plat/regs-usb-hsotg.h +++ b/arch/arm/plat-samsung/include/plat/regs-usb-hsotg.h diff --git a/arch/arm/plat-s3c/include/plat/regs-watchdog.h b/arch/arm/plat-samsung/include/plat/regs-watchdog.h index 4938492470f..4938492470f 100644 --- a/arch/arm/plat-s3c/include/plat/regs-watchdog.h +++ b/arch/arm/plat-samsung/include/plat/regs-watchdog.h diff --git a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h new file mode 100644 index 00000000000..d1772414931 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h @@ -0,0 +1,67 @@ +/* linux/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h + * + * Copyright (C) 2009 Samsung Electronics Ltd. + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __S3C64XX_PLAT_SPI_H +#define __S3C64XX_PLAT_SPI_H + +/** + * struct s3c64xx_spi_csinfo - ChipSelect description + * @fb_delay: Slave specific feedback delay. + * Refer to FB_CLK_SEL register definition in SPI chapter. + * @line: Custom 'identity' of the CS line. + * @set_level: CS line control. + * + * This is per SPI-Slave Chipselect information. + * Allocate and initialize one in machine init code and make the + * spi_board_info.controller_data point to it. + */ +struct s3c64xx_spi_csinfo { + u8 fb_delay; + unsigned line; + void (*set_level)(unsigned line_id, int lvl); +}; + +/** + * struct s3c64xx_spi_info - SPI Controller defining structure + * @src_clk_nr: Clock source index for the CLK_CFG[SPI_CLKSEL] field. + * @src_clk_name: Platform name of the corresponding clock. + * @num_cs: Number of CS this controller emulates. + * @cfg_gpio: Configure pins for this SPI controller. + * @fifo_lvl_mask: All tx fifo_lvl fields start at offset-6 + * @rx_lvl_offset: Depends on tx fifo_lvl field and bus number + * @high_speed: If the controller supports HIGH_SPEED_EN bit + */ +struct s3c64xx_spi_info { + int src_clk_nr; + char *src_clk_name; + + int num_cs; + + int (*cfg_gpio)(struct platform_device *pdev); + + /* Following two fields are for future compatibility */ + int fifo_lvl_mask; + int rx_lvl_offset; + int high_speed; +}; + +/** + * s3c64xx_spi_set_info - SPI Controller configure callback by the board + * initialization code. + * @cntrlr: SPI controller number the configuration is for. + * @src_clk_nr: Clock the SPI controller is to use to generate SPI clocks. + * @num_cs: Number of elements in the 'cs' array. + * + * Call this from machine init code for each SPI Controller that + * has some chips attached to it. + */ +extern void s3c64xx_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); + +#endif /* __S3C64XX_PLAT_SPI_H */ diff --git a/arch/arm/plat-s3c/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h index 53198673b6b..7d07cd7aa4f 100644 --- a/arch/arm/plat-s3c/include/plat/sdhci.h +++ b/arch/arm/plat-samsung/include/plat/sdhci.h @@ -78,8 +78,8 @@ extern void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *, int w); /* S3C6400 SDHCI setup */ -#ifdef CONFIG_S3C6400_SETUP_SDHCI -extern char *s3c6400_hsmmc_clksrcs[4]; +#ifdef CONFIG_S3C64XX_SETUP_SDHCI +extern char *s3c64xx_hsmmc_clksrcs[4]; #ifdef CONFIG_S3C_DEV_HSMMC extern void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev, @@ -89,7 +89,7 @@ extern void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev, static inline void s3c6400_default_sdhci0(void) { - s3c_hsmmc0_def_platdata.clocks = s3c6400_hsmmc_clksrcs; + s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs; s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio; s3c_hsmmc0_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card; } @@ -101,7 +101,7 @@ static inline void s3c6400_default_sdhci0(void) { } #ifdef CONFIG_S3C_DEV_HSMMC1 static inline void s3c6400_default_sdhci1(void) { - s3c_hsmmc1_def_platdata.clocks = s3c6400_hsmmc_clksrcs; + s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs; s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio; s3c_hsmmc1_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card; } @@ -112,7 +112,7 @@ static inline void s3c6400_default_sdhci1(void) { } #ifdef CONFIG_S3C_DEV_HSMMC2 static inline void s3c6400_default_sdhci2(void) { - s3c_hsmmc2_def_platdata.clocks = s3c6400_hsmmc_clksrcs; + s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs; s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio; s3c_hsmmc2_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card; } @@ -120,27 +120,19 @@ static inline void s3c6400_default_sdhci2(void) static inline void s3c6400_default_sdhci2(void) { } #endif /* CONFIG_S3C_DEV_HSMMC2 */ -#else -static inline void s3c6400_default_sdhci0(void) { } -static inline void s3c6400_default_sdhci1(void) { } -#endif /* CONFIG_S3C6400_SETUP_SDHCI */ - /* S3C6410 SDHCI setup */ -#ifdef CONFIG_S3C6410_SETUP_SDHCI -extern char *s3c6410_hsmmc_clksrcs[4]; - -extern void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev, - void __iomem *r, - struct mmc_ios *ios, - struct mmc_card *card); +extern void s3c6410_setup_sdhci_cfg_card(struct platform_device *dev, + void __iomem *r, + struct mmc_ios *ios, + struct mmc_card *card); #ifdef CONFIG_S3C_DEV_HSMMC static inline void s3c6410_default_sdhci0(void) { - s3c_hsmmc0_def_platdata.clocks = s3c6410_hsmmc_clksrcs; + s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs; s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio; - s3c_hsmmc0_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card; + s3c_hsmmc0_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card; } #else static inline void s3c6410_default_sdhci0(void) { } @@ -149,9 +141,9 @@ static inline void s3c6410_default_sdhci0(void) { } #ifdef CONFIG_S3C_DEV_HSMMC1 static inline void s3c6410_default_sdhci1(void) { - s3c_hsmmc1_def_platdata.clocks = s3c6410_hsmmc_clksrcs; + s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs; s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio; - s3c_hsmmc1_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card; + s3c_hsmmc1_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card; } #else static inline void s3c6410_default_sdhci1(void) { } @@ -160,9 +152,9 @@ static inline void s3c6410_default_sdhci1(void) { } #ifdef CONFIG_S3C_DEV_HSMMC2 static inline void s3c6410_default_sdhci2(void) { - s3c_hsmmc2_def_platdata.clocks = s3c6410_hsmmc_clksrcs; + s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs; s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio; - s3c_hsmmc2_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card; + s3c_hsmmc2_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card; } #else static inline void s3c6410_default_sdhci2(void) { } @@ -171,7 +163,10 @@ static inline void s3c6410_default_sdhci2(void) { } #else static inline void s3c6410_default_sdhci0(void) { } static inline void s3c6410_default_sdhci1(void) { } -#endif /* CONFIG_S3C6410_SETUP_SDHCI */ +static inline void s3c6400_default_sdhci0(void) { } +static inline void s3c6400_default_sdhci1(void) { } + +#endif /* CONFIG_S3C64XX_SETUP_SDHCI */ /* S5PC100 SDHCI setup */ diff --git a/arch/arm/plat-s3c/include/plat/udc-hs.h b/arch/arm/plat-samsung/include/plat/udc-hs.h index dd04db04310..a22a4f2eea9 100644 --- a/arch/arm/plat-s3c/include/plat/udc-hs.h +++ b/arch/arm/plat-samsung/include/plat/udc-hs.h @@ -12,7 +12,7 @@ * published by the Free Software Foundation. */ -enum s3c_hostg_dmamode { +enum s3c_hsotg_dmamode { S3C_HSOTG_DMA_NONE, /* do not use DMA at-all */ S3C_HSOTG_DMA_ONLY, /* always use DMA */ S3C_HSOTG_DMA_DRV, /* DMA is chosen by driver */ @@ -24,6 +24,6 @@ enum s3c_hostg_dmamode { * @is_osc: The clock source is an oscillator, not a crystal */ struct s3c_hsotg_plat { - enum s3c_hostg_dmamode dma; + enum s3c_hsotg_dmamode dma; unsigned int is_osc : 1; }; diff --git a/arch/arm/plat-s3c/include/plat/uncompress.h b/arch/arm/plat-samsung/include/plat/uncompress.h index dc66a477f62..e87ce8ffbbc 100644 --- a/arch/arm/plat-s3c/include/plat/uncompress.h +++ b/arch/arm/plat-samsung/include/plat/uncompress.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/plat-s3c/uncompress.h +/* arch/arm/plat-samsung/include/plat/uncompress.h * * Copyright 2003, 2007 Simtec Electronics * http://armlinux.simtec.co.uk/ diff --git a/arch/arm/plat-s3c/include/plat/usb-control.h b/arch/arm/plat-samsung/include/plat/usb-control.h index 822c87fe948..7fa1fbefc3f 100644 --- a/arch/arm/plat-s3c/include/plat/usb-control.h +++ b/arch/arm/plat-samsung/include/plat/usb-control.h @@ -1,4 +1,4 @@ -/* arch/arm/plat-s3c/include/plat/usb-control.h +/* arch/arm/plat-samsung/include/plat/usb-control.h * * Copyright (c) 2004 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> @@ -38,4 +38,6 @@ static void inline s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int port } } +extern void s3c_ohci_set_platdata(struct s3c2410_hcd_info *info); + #endif /*__ASM_ARCH_USBCONTROL_H */ diff --git a/arch/arm/plat-s3c/include/plat/watchdog-reset.h b/arch/arm/plat-samsung/include/plat/watchdog-reset.h index 54b762acb5a..54b762acb5a 100644 --- a/arch/arm/plat-s3c/include/plat/watchdog-reset.h +++ b/arch/arm/plat-samsung/include/plat/watchdog-reset.h diff --git a/arch/arm/plat-s3c/init.c b/arch/arm/plat-samsung/init.c index 6790edfaca6..6790edfaca6 100644 --- a/arch/arm/plat-s3c/init.c +++ b/arch/arm/plat-samsung/init.c diff --git a/arch/arm/plat-samsung/irq-uart.c b/arch/arm/plat-samsung/irq-uart.c new file mode 100644 index 00000000000..4f8c102674a --- /dev/null +++ b/arch/arm/plat-samsung/irq-uart.c @@ -0,0 +1,143 @@ +/* arch/arm/plat-samsung/irq-uart.c + * originally part of arch/arm/plat-s3c64xx/irq.c + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * Samsung- UART Interrupt handling + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/serial_core.h> +#include <linux/irq.h> +#include <linux/io.h> + +#include <mach/map.h> +#include <plat/irq-uart.h> +#include <plat/regs-serial.h> +#include <plat/cpu.h> + +/* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3] + * are consecutive when looking up the interrupt in the demux routines. + */ + +static inline void __iomem *s3c_irq_uart_base(unsigned int irq) +{ + struct s3c_uart_irq *uirq = get_irq_chip_data(irq); + return uirq->regs; +} + +static inline unsigned int s3c_irq_uart_bit(unsigned int irq) +{ + return irq & 3; +} + +static void s3c_irq_uart_mask(unsigned int irq) +{ + void __iomem *regs = s3c_irq_uart_base(irq); + unsigned int bit = s3c_irq_uart_bit(irq); + u32 reg; + + reg = __raw_readl(regs + S3C64XX_UINTM); + reg |= (1 << bit); + __raw_writel(reg, regs + S3C64XX_UINTM); +} + +static void s3c_irq_uart_maskack(unsigned int irq) +{ + void __iomem *regs = s3c_irq_uart_base(irq); + unsigned int bit = s3c_irq_uart_bit(irq); + u32 reg; + + reg = __raw_readl(regs + S3C64XX_UINTM); + reg |= (1 << bit); + __raw_writel(reg, regs + S3C64XX_UINTM); + __raw_writel(1 << bit, regs + S3C64XX_UINTP); +} + +static void s3c_irq_uart_unmask(unsigned int irq) +{ + void __iomem *regs = s3c_irq_uart_base(irq); + unsigned int bit = s3c_irq_uart_bit(irq); + u32 reg; + + reg = __raw_readl(regs + S3C64XX_UINTM); + reg &= ~(1 << bit); + __raw_writel(reg, regs + S3C64XX_UINTM); +} + +static void s3c_irq_uart_ack(unsigned int irq) +{ + void __iomem *regs = s3c_irq_uart_base(irq); + unsigned int bit = s3c_irq_uart_bit(irq); + + __raw_writel(1 << bit, regs + S3C64XX_UINTP); +} + +static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc) +{ + struct s3c_uart_irq *uirq = desc->handler_data; + u32 pend = __raw_readl(uirq->regs + S3C64XX_UINTP); + int base = uirq->base_irq; + + if (pend & (1 << 0)) + generic_handle_irq(base); + if (pend & (1 << 1)) + generic_handle_irq(base + 1); + if (pend & (1 << 2)) + generic_handle_irq(base + 2); + if (pend & (1 << 3)) + generic_handle_irq(base + 3); +} + +static struct irq_chip s3c_irq_uart = { + .name = "s3c-uart", + .mask = s3c_irq_uart_mask, + .unmask = s3c_irq_uart_unmask, + .mask_ack = s3c_irq_uart_maskack, + .ack = s3c_irq_uart_ack, +}; + +static void __init s3c_init_uart_irq(struct s3c_uart_irq *uirq) +{ + struct irq_desc *desc = irq_to_desc(uirq->parent_irq); + void __iomem *reg_base = uirq->regs; + unsigned int irq; + int offs; + + /* mask all interrupts at the start. */ + __raw_writel(0xf, reg_base + S3C64XX_UINTM); + + for (offs = 0; offs < 3; offs++) { + irq = uirq->base_irq + offs; + + set_irq_chip(irq, &s3c_irq_uart); + set_irq_chip_data(irq, uirq); + set_irq_handler(irq, handle_level_irq); + set_irq_flags(irq, IRQF_VALID); + } + + desc->handler_data = uirq; + set_irq_chained_handler(uirq->parent_irq, s3c_irq_demux_uart); +} + +/** + * s3c_init_uart_irqs() - initialise UART IRQs and the necessary demuxing + * @irq: The interrupt data for registering + * @nr_irqs: The number of interrupt descriptions in @irq. + * + * Register the UART interrupts specified by @irq including the demuxing + * routines. This supports the S3C6400 and newer style of devices. + */ +void __init s3c_init_uart_irqs(struct s3c_uart_irq *irq, unsigned int nr_irqs) +{ + for (; nr_irqs > 0; nr_irqs--, irq++) + s3c_init_uart_irq(irq); +} diff --git a/arch/arm/plat-samsung/irq-vic-timer.c b/arch/arm/plat-samsung/irq-vic-timer.c new file mode 100644 index 00000000000..0270519fcab --- /dev/null +++ b/arch/arm/plat-samsung/irq-vic-timer.c @@ -0,0 +1,86 @@ +/* arch/arm/plat-samsung/irq-vic-timer.c + * originally part of arch/arm/plat-s3c64xx/irq.c + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C64XX - Interrupt handling + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/io.h> + +#include <mach/map.h> +#include <plat/irq-vic-timer.h> +#include <plat/regs-timer.h> + +static void s3c_irq_demux_vic_timer(unsigned int irq, struct irq_desc *desc) +{ + generic_handle_irq((int)desc->handler_data); +} + +/* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */ + +static void s3c_irq_timer_mask(unsigned int irq) +{ + u32 reg = __raw_readl(S3C64XX_TINT_CSTAT); + + reg &= 0x1f; /* mask out pending interrupts */ + reg &= ~(1 << (irq - IRQ_TIMER0)); + __raw_writel(reg, S3C64XX_TINT_CSTAT); +} + +static void s3c_irq_timer_unmask(unsigned int irq) +{ + u32 reg = __raw_readl(S3C64XX_TINT_CSTAT); + + reg &= 0x1f; /* mask out pending interrupts */ + reg |= 1 << (irq - IRQ_TIMER0); + __raw_writel(reg, S3C64XX_TINT_CSTAT); +} + +static void s3c_irq_timer_ack(unsigned int irq) +{ + u32 reg = __raw_readl(S3C64XX_TINT_CSTAT); + + reg &= 0x1f; + reg |= (1 << 5) << (irq - IRQ_TIMER0); + __raw_writel(reg, S3C64XX_TINT_CSTAT); +} + +static struct irq_chip s3c_irq_timer = { + .name = "s3c-timer", + .mask = s3c_irq_timer_mask, + .unmask = s3c_irq_timer_unmask, + .ack = s3c_irq_timer_ack, +}; + +/** + * s3c_init_vic_timer_irq() - initialise timer irq chanined off VIC.\ + * @parent_irq: The parent IRQ on the VIC for the timer. + * @timer_irq: The IRQ to be used for the timer. + * + * Register the necessary IRQ chaining and support for the timer IRQs + * chained of the VIC. + */ +void __init s3c_init_vic_timer_irq(unsigned int parent_irq, + unsigned int timer_irq) +{ + struct irq_desc *desc = irq_to_desc(parent_irq); + + set_irq_chained_handler(parent_irq, s3c_irq_demux_vic_timer); + + set_irq_chip(timer_irq, &s3c_irq_timer); + set_irq_handler(timer_irq, handle_level_irq); + set_irq_flags(timer_irq, IRQF_VALID); + + desc->handler_data = (void *)timer_irq; +} diff --git a/arch/arm/plat-s3c/pm-check.c b/arch/arm/plat-samsung/pm-check.c index 8eb1f439861..0b5bb774192 100644 --- a/arch/arm/plat-s3c/pm-check.c +++ b/arch/arm/plat-samsung/pm-check.c @@ -20,8 +20,8 @@ #include <plat/pm.h> -#if CONFIG_S3C2410_PM_CHECK_CHUNKSIZE < 1 -#error CONFIG_S3C2410_PM_CHECK_CHUNKSIZE must be a positive non-zero value +#if CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE < 1 +#error CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE must be a positive non-zero value #endif /* suspend checking code... @@ -29,12 +29,12 @@ * this next area does a set of crc checks over all the installed * memory, so the system can verify if the resume was ok. * - * CONFIG_S3C2410_PM_CHECK_CHUNKSIZE defines the block-size for the CRC, + * CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE defines the block-size for the CRC, * increasing it will mean that the area corrupted will be less easy to spot, * and reducing the size will cause the CRC save area to grow */ -#define CHECK_CHUNKSIZE (CONFIG_S3C2410_PM_CHECK_CHUNKSIZE * 1024) +#define CHECK_CHUNKSIZE (CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE * 1024) static u32 crc_size; /* size needed for the crc block */ static u32 *crcs; /* allocated over suspend/resume */ diff --git a/arch/arm/plat-s3c/pm-gpio.c b/arch/arm/plat-samsung/pm-gpio.c index cfd326a8b69..69a4c7f02e2 100644 --- a/arch/arm/plat-s3c/pm-gpio.c +++ b/arch/arm/plat-samsung/pm-gpio.c @@ -19,7 +19,7 @@ #include <linux/io.h> #include <linux/gpio.h> -#include <mach/gpio-core.h> +#include <plat/gpio-core.h> #include <plat/pm.h> /* PM GPIO helpers */ diff --git a/arch/arm/plat-s3c/pm.c b/arch/arm/plat-samsung/pm.c index 767470601e5..27cfca59769 100644 --- a/arch/arm/plat-s3c/pm.c +++ b/arch/arm/plat-samsung/pm.c @@ -29,7 +29,7 @@ #include <asm/irq.h> #include <plat/pm.h> -#include <plat/pm-core.h> +#include <mach/pm-core.h> /* for external use */ @@ -41,7 +41,7 @@ unsigned long s3c_pm_flags; * resume before the console layer is available. */ -#ifdef CONFIG_S3C2410_PM_DEBUG +#ifdef CONFIG_SAMSUNG_PM_DEBUG extern void printascii(const char *); void s3c_pm_dbg(const char *fmt, ...) @@ -65,13 +65,13 @@ static inline void s3c_pm_debug_init(void) #else #define s3c_pm_debug_init() do { } while(0) -#endif /* CONFIG_S3C2410_PM_DEBUG */ +#endif /* CONFIG_SAMSUNG_PM_DEBUG */ /* Save the UART configurations if we are configured for debug. */ unsigned char pm_uart_udivslot; -#ifdef CONFIG_S3C2410_PM_DEBUG +#ifdef CONFIG_SAMSUNG_PM_DEBUG struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS]; diff --git a/arch/arm/plat-s3c/pwm-clock.c b/arch/arm/plat-samsung/pwm-clock.c index a318215ab53..46c9381e083 100644 --- a/arch/arm/plat-s3c/pwm-clock.c +++ b/arch/arm/plat-samsung/pwm-clock.c @@ -130,20 +130,22 @@ static int clk_pwm_scaler_set_rate(struct clk *clk, unsigned long rate) return 0; } +static struct clk_ops clk_pwm_scaler_ops = { + .get_rate = clk_pwm_scaler_get_rate, + .set_rate = clk_pwm_scaler_set_rate, + .round_rate = clk_pwm_scaler_round_rate, +}; + static struct clk clk_timer_scaler[] = { [0] = { .name = "pwm-scaler0", .id = -1, - .get_rate = clk_pwm_scaler_get_rate, - .set_rate = clk_pwm_scaler_set_rate, - .round_rate = clk_pwm_scaler_round_rate, + .ops = &clk_pwm_scaler_ops, }, [1] = { .name = "pwm-scaler1", .id = -1, - .get_rate = clk_pwm_scaler_get_rate, - .set_rate = clk_pwm_scaler_set_rate, - .round_rate = clk_pwm_scaler_round_rate, + .ops = &clk_pwm_scaler_ops, }, }; @@ -256,50 +258,46 @@ static int clk_pwm_tdiv_set_rate(struct clk *clk, unsigned long rate) return 0; } +static struct clk_ops clk_tdiv_ops = { + .get_rate = clk_pwm_tdiv_get_rate, + .set_rate = clk_pwm_tdiv_set_rate, + .round_rate = clk_pwm_tdiv_round_rate, +}; + static struct pwm_tdiv_clk clk_timer_tdiv[] = { [0] = { .clk = { - .name = "pwm-tdiv", - .parent = &clk_timer_scaler[0], - .get_rate = clk_pwm_tdiv_get_rate, - .set_rate = clk_pwm_tdiv_set_rate, - .round_rate = clk_pwm_tdiv_round_rate, + .name = "pwm-tdiv", + .ops = &clk_tdiv_ops, + .parent = &clk_timer_scaler[0], }, }, [1] = { .clk = { - .name = "pwm-tdiv", - .parent = &clk_timer_scaler[0], - .get_rate = clk_pwm_tdiv_get_rate, - .set_rate = clk_pwm_tdiv_set_rate, - .round_rate = clk_pwm_tdiv_round_rate, + .name = "pwm-tdiv", + .ops = &clk_tdiv_ops, + .parent = &clk_timer_scaler[0], } }, [2] = { .clk = { - .name = "pwm-tdiv", - .parent = &clk_timer_scaler[1], - .get_rate = clk_pwm_tdiv_get_rate, - .set_rate = clk_pwm_tdiv_set_rate, - .round_rate = clk_pwm_tdiv_round_rate, + .name = "pwm-tdiv", + .ops = &clk_tdiv_ops, + .parent = &clk_timer_scaler[1], }, }, [3] = { .clk = { - .name = "pwm-tdiv", - .parent = &clk_timer_scaler[1], - .get_rate = clk_pwm_tdiv_get_rate, - .set_rate = clk_pwm_tdiv_set_rate, - .round_rate = clk_pwm_tdiv_round_rate, + .name = "pwm-tdiv", + .ops = &clk_tdiv_ops, + .parent = &clk_timer_scaler[1], }, }, [4] = { .clk = { - .name = "pwm-tdiv", - .parent = &clk_timer_scaler[1], - .get_rate = clk_pwm_tdiv_get_rate, - .set_rate = clk_pwm_tdiv_set_rate, - .round_rate = clk_pwm_tdiv_round_rate, + .name = "pwm-tdiv", + .ops = &clk_tdiv_ops, + .parent = &clk_timer_scaler[1], }, }, }; @@ -356,31 +354,35 @@ static int clk_pwm_tin_set_parent(struct clk *clk, struct clk *parent) return 0; } +static struct clk_ops clk_tin_ops = { + .set_parent = clk_pwm_tin_set_parent, +}; + static struct clk clk_tin[] = { [0] = { - .name = "pwm-tin", - .id = 0, - .set_parent = clk_pwm_tin_set_parent, + .name = "pwm-tin", + .id = 0, + .ops = &clk_tin_ops, }, [1] = { - .name = "pwm-tin", - .id = 1, - .set_parent = clk_pwm_tin_set_parent, + .name = "pwm-tin", + .id = 1, + .ops = &clk_tin_ops, }, [2] = { - .name = "pwm-tin", - .id = 2, - .set_parent = clk_pwm_tin_set_parent, + .name = "pwm-tin", + .id = 2, + .ops = &clk_tin_ops, }, [3] = { - .name = "pwm-tin", - .id = 3, - .set_parent = clk_pwm_tin_set_parent, + .name = "pwm-tin", + .id = 3, + .ops = &clk_tin_ops, }, [4] = { - .name = "pwm-tin", - .id = 4, - .set_parent = clk_pwm_tin_set_parent, + .name = "pwm-tin", + .id = 4, + .ops = &clk_tin_ops, }, }; @@ -428,25 +430,15 @@ __init void s3c_pwmclk_init(void) return; } - for (clk = 0; clk < ARRAY_SIZE(clk_timer_scaler); clk++) { + for (clk = 0; clk < ARRAY_SIZE(clk_timer_scaler); clk++) clk_timer_scaler[clk].parent = clk_timers; - ret = s3c24xx_register_clock(&clk_timer_scaler[clk]); - if (ret < 0) { - printk(KERN_ERR "error adding pwm scaler%d clock\n", clk); - return; - } - } - for (clk = 0; clk < ARRAY_SIZE(clk_timer_tclk); clk++) { - ret = s3c24xx_register_clock(&clk_timer_tclk[clk]); - if (ret < 0) { - printk(KERN_ERR "error adding pww tclk%d\n", clk); - return; - } - } + s3c_register_clocks(clk_timer_scaler, ARRAY_SIZE(clk_timer_scaler)); + s3c_register_clocks(clk_timer_tclk, ARRAY_SIZE(clk_timer_tclk)); for (clk = 0; clk < ARRAY_SIZE(clk_timer_tdiv); clk++) { ret = clk_pwm_tdiv_register(clk); + if (ret < 0) { printk(KERN_ERR "error adding pwm%d tdiv clock\n", clk); return; diff --git a/arch/arm/plat-s3c/pwm.c b/arch/arm/plat-samsung/pwm.c index ef019f27b67..ef019f27b67 100644 --- a/arch/arm/plat-s3c/pwm.c +++ b/arch/arm/plat-samsung/pwm.c diff --git a/arch/arm/plat-s3c/time.c b/arch/arm/plat-samsung/time.c index 3b27b29da47..2231d80ad81 100644 --- a/arch/arm/plat-s3c/time.c +++ b/arch/arm/plat-samsung/time.c @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s3c24xx/time.c +/* linux/arch/arm/plat-samsung/time.c * * Copyright (C) 2003-2005 Simtec Electronics * Ben Dooks, <ben@simtec.co.uk> diff --git a/drivers/Makefile b/drivers/Makefile index 81e36596b1e..34f1e1064db 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -99,6 +99,7 @@ obj-$(CONFIG_SGI_SN) += sn/ obj-y += firmware/ obj-$(CONFIG_CRYPTO) += crypto/ obj-$(CONFIG_SUPERH) += sh/ +obj-$(CONFIG_ARCH_SHMOBILE) += sh/ obj-$(CONFIG_GENERIC_TIME) += clocksource/ obj-$(CONFIG_DMA_ENGINE) += dma/ obj-$(CONFIG_DCA) += dca/ diff --git a/drivers/input/keyboard/locomokbd.c b/drivers/input/keyboard/locomokbd.c index 9caed30f3bb..b1ab29861e1 100644 --- a/drivers/input/keyboard/locomokbd.c +++ b/drivers/input/keyboard/locomokbd.c @@ -192,11 +192,18 @@ static void locomokbd_scankeyboard(struct locomokbd *locomokbd) static irqreturn_t locomokbd_interrupt(int irq, void *dev_id) { struct locomokbd *locomokbd = dev_id; + u16 r; + + r = locomo_readl(locomokbd->base + LOCOMO_KIC); + if ((r & 0x0001) == 0) + return IRQ_HANDLED; + + locomo_writel(r & ~0x0100, locomokbd->base + LOCOMO_KIC); /* Ack */ + /** wait chattering delay **/ udelay(100); locomokbd_scankeyboard(locomokbd); - return IRQ_HANDLED; } @@ -210,6 +217,25 @@ static void locomokbd_timer_callback(unsigned long data) locomokbd_scankeyboard(locomokbd); } +static int locomokbd_open(struct input_dev *dev) +{ + struct locomokbd *locomokbd = input_get_drvdata(dev); + u16 r; + + r = locomo_readl(locomokbd->base + LOCOMO_KIC) | 0x0010; + locomo_writel(r, locomokbd->base + LOCOMO_KIC); + return 0; +} + +static void locomokbd_close(struct input_dev *dev) +{ + struct locomokbd *locomokbd = input_get_drvdata(dev); + u16 r; + + r = locomo_readl(locomokbd->base + LOCOMO_KIC) & ~0x0010; + locomo_writel(r, locomokbd->base + LOCOMO_KIC); +} + static int __devinit locomokbd_probe(struct locomo_dev *dev) { struct locomokbd *locomokbd; @@ -253,6 +279,8 @@ static int __devinit locomokbd_probe(struct locomo_dev *dev) input_dev->id.vendor = 0x0001; input_dev->id.product = 0x0001; input_dev->id.version = 0x0100; + input_dev->open = locomokbd_open; + input_dev->close = locomokbd_close; input_dev->dev.parent = &dev->dev; input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) | @@ -261,6 +289,8 @@ static int __devinit locomokbd_probe(struct locomo_dev *dev) input_dev->keycodesize = sizeof(locomokbd_keycode[0]); input_dev->keycodemax = ARRAY_SIZE(locomokbd_keycode); + input_set_drvdata(input_dev, locomokbd); + memcpy(locomokbd->keycode, locomokbd_keycode, sizeof(locomokbd->keycode)); for (i = 0; i < LOCOMOKBD_NUMKEYS; i++) set_bit(locomokbd->keycode[i], input_dev->keybit); diff --git a/drivers/mtd/maps/pismo.c b/drivers/mtd/maps/pismo.c index c48cad271f5..30e12c88d1d 100644 --- a/drivers/mtd/maps/pismo.c +++ b/drivers/mtd/maps/pismo.c @@ -118,7 +118,7 @@ static int __devinit pismo_add_device(struct pismo_data *pismo, int i, { struct platform_device *dev; struct resource res = { }; - phys_addr_t base = region.base; + phys_addr_t base = region->base; int ret; if (base == ~0) diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index bb646560423..1157d5679e6 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -444,7 +444,7 @@ config MTD_NAND_FSL_UPM config MTD_NAND_MXC tristate "MXC NAND support" - depends on ARCH_MX2 || ARCH_MX3 + depends on ARCH_MX2 || ARCH_MX25 || ARCH_MX3 help This enables the driver for the NAND flash controller on the MXC processors. diff --git a/drivers/pcmcia/sa1111_generic.c b/drivers/pcmcia/sa1111_generic.c index de6bc333d29..db79ca61cf9 100644 --- a/drivers/pcmcia/sa1111_generic.c +++ b/drivers/pcmcia/sa1111_generic.c @@ -21,11 +21,18 @@ #include "sa1111_generic.h" +#define IDX_IRQ_S0_READY_NINT (0) +#define IDX_IRQ_S0_CD_VALID (1) +#define IDX_IRQ_S0_BVD1_STSCHG (2) +#define IDX_IRQ_S1_READY_NINT (3) +#define IDX_IRQ_S1_CD_VALID (4) +#define IDX_IRQ_S1_BVD1_STSCHG (5) + static struct pcmcia_irqs irqs[] = { - { 0, IRQ_S0_CD_VALID, "SA1111 PCMCIA card detect" }, - { 0, IRQ_S0_BVD1_STSCHG, "SA1111 PCMCIA BVD1" }, - { 1, IRQ_S1_CD_VALID, "SA1111 CF card detect" }, - { 1, IRQ_S1_BVD1_STSCHG, "SA1111 CF BVD1" }, + { 0, NO_IRQ, "SA1111 PCMCIA card detect" }, + { 0, NO_IRQ, "SA1111 PCMCIA BVD1" }, + { 1, NO_IRQ, "SA1111 CF card detect" }, + { 1, NO_IRQ, "SA1111 CF BVD1" }, }; static int sa1111_pcmcia_hw_init(struct soc_pcmcia_socket *skt) @@ -136,7 +143,9 @@ int sa1111_pcmcia_add(struct sa1111_dev *dev, struct pcmcia_low_level *ops, s->soc.ops = ops; s->soc.socket.owner = ops->owner; s->soc.socket.dev.parent = &dev->dev; - s->soc.socket.pci_irq = s->soc.nr ? IRQ_S1_READY_NINT : IRQ_S0_READY_NINT; + s->soc.socket.pci_irq = s->soc.nr ? + dev->irq[IDX_IRQ_S0_READY_NINT] : + dev->irq[IDX_IRQ_S1_READY_NINT]; s->dev = dev; ret = add(&s->soc); @@ -162,6 +171,12 @@ static int pcmcia_probe(struct sa1111_dev *dev) base = dev->mapbase; + /* Initialize PCMCIA IRQs */ + irqs[0].irq = dev->irq[IDX_IRQ_S0_CD_VALID]; + irqs[1].irq = dev->irq[IDX_IRQ_S0_BVD1_STSCHG]; + irqs[2].irq = dev->irq[IDX_IRQ_S1_CD_VALID]; + irqs[3].irq = dev->irq[IDX_IRQ_S1_BVD1_STSCHG]; + /* * Initialise the suspend state. */ diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index d6ff7339562..f55c49475a8 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -447,7 +447,7 @@ config SERIAL_CLPS711X_CONSOLE config SERIAL_SAMSUNG tristate "Samsung SoC serial support" - depends on ARM && PLAT_S3C + depends on ARM && PLAT_SAMSUNG select SERIAL_CORE help Support for the on-chip UARTs on the Samsung S3C24XX series CPUs, @@ -455,11 +455,18 @@ config SERIAL_SAMSUNG provide all of these ports, depending on how the serial port pins are configured. +config SERIAL_SAMSUNG_UARTS_4 + bool + depends on ARM && PLAT_SAMSUNG + default y if CPU_S3C2443 + help + Internal node for the common case of 4 Samsung compatible UARTs + config SERIAL_SAMSUNG_UARTS int - depends on ARM && PLAT_S3C + depends on ARM && PLAT_SAMSUNG default 2 if ARCH_S3C2400 - default 4 if ARCH_S5PC1XX || ARCH_S3C64XX || CPU_S3C2443 + default 4 if SERIAL_SAMSUNG_UARTS_4 default 3 help Select the number of available UART ports for the Samsung S3C @@ -526,20 +533,30 @@ config SERIAL_S3C24A0 Serial port support for the Samsung S3C24A0 SoC config SERIAL_S3C6400 - tristate "Samsung S3C6400/S3C6410 Serial port support" - depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410) + tristate "Samsung S3C6400/S3C6410/S5P6440 Seria port support" + depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440) + select SERIAL_SAMSUNG_UARTS_4 default y help - Serial port support for the Samsung S3C6400 and S3C6410 + Serial port support for the Samsung S3C6400, S3C6410 and S5P6440 SoCs config SERIAL_S5PC100 tristate "Samsung S5PC100 Serial port support" depends on SERIAL_SAMSUNG && CPU_S5PC100 + select SERIAL_SAMSUNG_UARTS_4 default y help Serial port support for the Samsung S5PC100 SoCs +config SERIAL_S5PV210 + tristate "Samsung S5PV210 Serial port support" + depends on SERIAL_SAMSUNG && (CPU_S5PV210 || CPU_S5P6442) + select SERIAL_SAMSUNG_UARTS_4 if CPU_S5PV210 + default y + help + Serial port support for Samsung's S5P Family of SoC's + config SERIAL_MAX3100 tristate "MAX3100 support" depends on SPI @@ -996,7 +1013,7 @@ config SERIAL_IP22_ZILOG_CONSOLE config SERIAL_SH_SCI tristate "SuperH SCI(F) serial port support" - depends on HAVE_CLK && (SUPERH || H8300) + depends on HAVE_CLK && (SUPERH || H8300 || ARCH_SHMOBILE) select SERIAL_CORE config SERIAL_SH_SCI_NR_UARTS diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 5548fe7df61..6aa4723b74e 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -45,6 +45,7 @@ obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o obj-$(CONFIG_SERIAL_S3C24A0) += s3c24a0.o obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o obj-$(CONFIG_SERIAL_S5PC100) += s3c6400.o +obj-$(CONFIG_SERIAL_S5PV210) += s5pv210.o obj-$(CONFIG_SERIAL_MAX3100) += max3100.o obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o obj-$(CONFIG_SERIAL_MUX) += mux.o diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index d00fcf8e6c7..e579d7a1807 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -440,7 +440,7 @@ static irqreturn_t imx_rxint(int irq, void *dev_id) temp = readl(sport->port.membase + USR2); if (temp & USR2_BRCD) { - writel(temp | USR2_BRCD, sport->port.membase + USR2); + writel(USR2_BRCD, sport->port.membase + USR2); if (uart_handle_break(&sport->port)) continue; } diff --git a/drivers/serial/s3c2412.c b/drivers/serial/s3c2412.c index ce75e28e36e..1700b1a2fb7 100644 --- a/drivers/serial/s3c2412.c +++ b/drivers/serial/s3c2412.c @@ -102,6 +102,7 @@ static struct s3c24xx_uart_info s3c2412_uart_inf = { .name = "Samsung S3C2412 UART", .type = PORT_S3C2412, .fifosize = 64, + .has_divslot = 1, .rx_fifomask = S3C2440_UFSTAT_RXMASK, .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, .rx_fifofull = S3C2440_UFSTAT_RXFULL, diff --git a/drivers/serial/s5pv210.c b/drivers/serial/s5pv210.c new file mode 100644 index 00000000000..8dc03837617 --- /dev/null +++ b/drivers/serial/s5pv210.c @@ -0,0 +1,154 @@ +/* linux/drivers/serial/s5pv210.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Based on drivers/serial/s3c6400.c + * + * Driver for Samsung S5PV210 SoC UARTs. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/module.h> +#include <linux/ioport.h> +#include <linux/io.h> +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/serial_core.h> +#include <linux/serial.h> + +#include <asm/irq.h> +#include <mach/hardware.h> +#include <plat/regs-serial.h> +#include "samsung.h" + +static int s5pv210_serial_setsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + unsigned long ucon = rd_regl(port, S3C2410_UCON); + + if (strcmp(clk->name, "pclk") == 0) + ucon &= ~S5PV210_UCON_CLKMASK; + else if (strcmp(clk->name, "uclk1") == 0) + ucon |= S5PV210_UCON_CLKMASK; + else { + printk(KERN_ERR "unknown clock source %s\n", clk->name); + return -EINVAL; + } + + wr_regl(port, S3C2410_UCON, ucon); + return 0; +} + + +static int s5pv210_serial_getsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + u32 ucon = rd_regl(port, S3C2410_UCON); + + clk->divisor = 1; + + switch (ucon & S5PV210_UCON_CLKMASK) { + case S5PV210_UCON_PCLK: + clk->name = "pclk"; + break; + case S5PV210_UCON_UCLK: + clk->name = "uclk1"; + break; + } + + return 0; +} + +static int s5pv210_serial_resetport(struct uart_port *port, + struct s3c2410_uartcfg *cfg) +{ + unsigned long ucon = rd_regl(port, S3C2410_UCON); + + ucon &= S5PV210_UCON_CLKMASK; + wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); + wr_regl(port, S3C2410_ULCON, cfg->ulcon); + + /* reset both fifos */ + wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); + wr_regl(port, S3C2410_UFCON, cfg->ufcon); + + return 0; +} + +#define S5PV210_UART_DEFAULT_INFO(fifo_size) \ + .name = "Samsung S5PV210 UART0", \ + .type = PORT_S3C6400, \ + .fifosize = fifo_size, \ + .has_divslot = 1, \ + .rx_fifomask = S5PV210_UFSTAT_RXMASK, \ + .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, \ + .rx_fifofull = S5PV210_UFSTAT_RXFULL, \ + .tx_fifofull = S5PV210_UFSTAT_TXFULL, \ + .tx_fifomask = S5PV210_UFSTAT_TXMASK, \ + .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT, \ + .get_clksrc = s5pv210_serial_getsource, \ + .set_clksrc = s5pv210_serial_setsource, \ + .reset_port = s5pv210_serial_resetport + +static struct s3c24xx_uart_info s5p_port_fifo256 = { + S5PV210_UART_DEFAULT_INFO(256), +}; + +static struct s3c24xx_uart_info s5p_port_fifo64 = { + S5PV210_UART_DEFAULT_INFO(64), +}; + +static struct s3c24xx_uart_info s5p_port_fifo16 = { + S5PV210_UART_DEFAULT_INFO(16), +}; + +static struct s3c24xx_uart_info *s5p_uart_inf[] = { + [0] = &s5p_port_fifo256, + [1] = &s5p_port_fifo64, + [2] = &s5p_port_fifo16, + [3] = &s5p_port_fifo16, +}; + +/* device management */ +static int s5p_serial_probe(struct platform_device *pdev) +{ + return s3c24xx_serial_probe(pdev, s5p_uart_inf[pdev->id]); +} + +static struct platform_driver s5p_serial_drv = { + .probe = s5p_serial_probe, + .remove = __devexit_p(s3c24xx_serial_remove), + .driver = { + .name = "s5pv210-uart", + .owner = THIS_MODULE, + }, +}; + +static int __init s5pv210_serial_console_init(void) +{ + return s3c24xx_serial_initconsole(&s5p_serial_drv, s5p_uart_inf); +} + +console_initcall(s5pv210_serial_console_init); + +static int __init s5p_serial_init(void) +{ + return s3c24xx_serial_init(&s5p_serial_drv, *s5p_uart_inf); +} + +static void __exit s5p_serial_exit(void) +{ + platform_driver_unregister(&s5p_serial_drv); +} + +module_init(s5p_serial_init); +module_exit(s5p_serial_exit); + +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:s5pv210-uart"); +MODULE_DESCRIPTION("Samsung S5PV210 UART Driver support"); +MODULE_AUTHOR("Thomas Abraham <thomas.ab@samsung.com>"); diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c index 52e3df113ec..6982243736d 100644 --- a/drivers/serial/samsung.c +++ b/drivers/serial/samsung.c @@ -1374,7 +1374,7 @@ s3c24xx_serial_get_options(struct uart_port *port, int *baud, * data. */ -static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info *info) +static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info **info) { struct s3c24xx_uart_port *ptr = s3c24xx_serial_ports; struct platform_device **platdev_ptr; @@ -1385,7 +1385,7 @@ static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info *info) platdev_ptr = s3c24xx_uart_devs; for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++, ptr++, platdev_ptr++) { - s3c24xx_serial_init_port(ptr, info, *platdev_ptr); + s3c24xx_serial_init_port(ptr, info[i], *platdev_ptr); } return 0; @@ -1451,7 +1451,7 @@ static struct console s3c24xx_serial_console = { }; int s3c24xx_serial_initconsole(struct platform_driver *drv, - struct s3c24xx_uart_info *info) + struct s3c24xx_uart_info **info) { struct platform_device *dev = s3c24xx_uart_devs[0]; diff --git a/drivers/serial/samsung.h b/drivers/serial/samsung.h index 1fb22343df4..0ac06a07d25 100644 --- a/drivers/serial/samsung.h +++ b/drivers/serial/samsung.h @@ -75,19 +75,24 @@ extern int s3c24xx_serial_probe(struct platform_device *dev, extern int __devexit s3c24xx_serial_remove(struct platform_device *dev); extern int s3c24xx_serial_initconsole(struct platform_driver *drv, - struct s3c24xx_uart_info *uart); + struct s3c24xx_uart_info **uart); extern int s3c24xx_serial_init(struct platform_driver *drv, struct s3c24xx_uart_info *info); #ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE -#define s3c24xx_console_init(__drv, __inf) \ -static int __init s3c_serial_console_init(void) \ -{ \ - return s3c24xx_serial_initconsole(__drv, __inf); \ -} \ - \ +#define s3c24xx_console_init(__drv, __inf) \ +static int __init s3c_serial_console_init(void) \ +{ \ + struct s3c24xx_uart_info *uinfo[CONFIG_SERIAL_SAMSUNG_UARTS]; \ + int i; \ + \ + for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++) \ + uinfo[i] = __inf; \ + return s3c24xx_serial_initconsole(__drv, uinfo); \ +} \ + \ console_initcall(s3c_serial_console_init) #else diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index f7d2589926d..fad67d33b0b 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -30,7 +30,8 @@ */ # define SCSCR_INIT(port) (port->mapbase == SCIF2) ? 0xF3 : 0xF0 #elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) + defined(CONFIG_CPU_SUBTYPE_SH7721) || \ + defined(CONFIG_ARCH_SHMOBILE) # define SCSCR_INIT(port) 0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */ # define PORT_PTCR 0xA405011EUL # define PORT_PVCR 0xA4050122UL @@ -228,7 +229,8 @@ #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) + defined(CONFIG_CPU_SUBTYPE_SH7721) || \ + defined(CONFIG_ARCH_SHMOBILE) # define SCIF_ORER 0x0200 # define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK | SCIF_ORER) # define SCIF_RFDC_MASK 0x007f @@ -261,7 +263,8 @@ #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) + defined(CONFIG_CPU_SUBTYPE_SH7721) || \ + defined(CONFIG_ARCH_SHMOBILE) # define SCxSR_RDxF_CLEAR(port) (sci_in(port, SCxSR) & 0xfffc) # define SCxSR_ERROR_CLEAR(port) (sci_in(port, SCxSR) & 0xfd73) # define SCxSR_TDxE_CLEAR(port) (sci_in(port, SCxSR) & 0xffdf) @@ -356,7 +359,7 @@ SCI_OUT(sci_size, sci_offset, value); \ } -#ifdef CONFIG_CPU_SH3 +#if defined(CONFIG_CPU_SH3) || defined(CONFIG_ARCH_SHMOBILE) #if defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) #define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \ sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \ @@ -366,7 +369,8 @@ CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) #elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \ defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) + defined(CONFIG_CPU_SUBTYPE_SH7721) || \ + defined(CONFIG_ARCH_SHMOBILE) #define SCIF_FNS(name, scif_offset, scif_size) \ CPU_SCIF_FNS(name, scif_offset, scif_size) #else @@ -401,7 +405,8 @@ #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) + defined(CONFIG_CPU_SUBTYPE_SH7721) || \ + defined(CONFIG_ARCH_SHMOBILE) SCIF_FNS(SCSMR, 0x00, 16) SCIF_FNS(SCBRR, 0x04, 8) @@ -413,7 +418,7 @@ SCIF_FNS(SCFCR, 0x18, 16) SCIF_FNS(SCFDR, 0x1c, 16) SCIF_FNS(SCxTDR, 0x20, 8) SCIF_FNS(SCxRDR, 0x24, 8) -SCIF_FNS(SCLSR, 0x24, 16) +SCIF_FNS(SCLSR, 0x00, 0) #elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\ defined(CONFIG_CPU_SUBTYPE_SH7724) SCIx_FNS(SCSMR, 0x00, 16, 0x00, 16) @@ -583,7 +588,8 @@ static inline int sci_rxd_in(struct uart_port *port) #define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(16*bps)-1) #elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \ defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) + defined(CONFIG_CPU_SUBTYPE_SH7721) || \ + defined(CONFIG_ARCH_SHMOBILE) #define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1) #elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\ defined(CONFIG_CPU_SUBTYPE_SH7724) diff --git a/drivers/sh/intc.c b/drivers/sh/intc.c index 3a5a17db947..c2750391fd3 100644 --- a/drivers/sh/intc.c +++ b/drivers/sh/intc.c @@ -762,6 +762,10 @@ static void __init intc_register_irq(struct intc_desc *desc, if (desc->hw.ack_regs) ack_handle[irq] = intc_ack_data(desc, d, enum_id); + +#ifdef CONFIG_ARM + set_irq_flags(irq, IRQF_VALID); /* Enable IRQ on ARM systems */ +#endif } static unsigned int __init save_reg(struct intc_desc_int *d, @@ -1024,8 +1028,12 @@ unsigned int create_irq_nr(unsigned int irq_want, int node) out_unlock: spin_unlock_irqrestore(&vector_lock, flags); - if (irq > 0) + if (irq > 0) { dynamic_irq_init(irq); +#ifdef CONFIG_ARM + set_irq_flags(irq, IRQF_VALID); /* Enable IRQ on ARM systems */ +#endif + } return irq; } diff --git a/drivers/usb/gadget/fsl_mx3_udc.c b/drivers/usb/gadget/fsl_mx3_udc.c index 4bc2bf3d602..20a802ecaa1 100644 --- a/drivers/usb/gadget/fsl_mx3_udc.c +++ b/drivers/usb/gadget/fsl_mx3_udc.c @@ -17,6 +17,8 @@ #include <linux/fsl_devices.h> #include <linux/platform_device.h> +#include <mach/hardware.h> + static struct clk *mxc_ahb_clk; static struct clk *mxc_usb_clk; @@ -28,14 +30,16 @@ int fsl_udc_clk_init(struct platform_device *pdev) pdata = pdev->dev.platform_data; - mxc_ahb_clk = clk_get(&pdev->dev, "usb_ahb"); - if (IS_ERR(mxc_ahb_clk)) - return PTR_ERR(mxc_ahb_clk); + if (!cpu_is_mx35()) { + mxc_ahb_clk = clk_get(&pdev->dev, "usb_ahb"); + if (IS_ERR(mxc_ahb_clk)) + return PTR_ERR(mxc_ahb_clk); - ret = clk_enable(mxc_ahb_clk); - if (ret < 0) { - dev_err(&pdev->dev, "clk_enable(\"usb_ahb\") failed\n"); - goto eenahb; + ret = clk_enable(mxc_ahb_clk); + if (ret < 0) { + dev_err(&pdev->dev, "clk_enable(\"usb_ahb\") failed\n"); + goto eenahb; + } } /* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */ @@ -50,6 +54,7 @@ int fsl_udc_clk_init(struct platform_device *pdev) if (pdata->phy_mode != FSL_USB2_PHY_ULPI && (freq < 59999000 || freq > 60001000)) { dev_err(&pdev->dev, "USB_CLK=%lu, should be 60MHz\n", freq); + ret = -EINVAL; goto eclkrate; } @@ -66,9 +71,11 @@ eclkrate: clk_put(mxc_usb_clk); mxc_usb_clk = NULL; egusb: - clk_disable(mxc_ahb_clk); + if (!cpu_is_mx35()) + clk_disable(mxc_ahb_clk); eenahb: - clk_put(mxc_ahb_clk); + if (!cpu_is_mx35()) + clk_put(mxc_ahb_clk); return ret; } @@ -90,6 +97,8 @@ void fsl_udc_clk_release(void) clk_disable(mxc_usb_clk); clk_put(mxc_usb_clk); } - clk_disable(mxc_ahb_clk); - clk_put(mxc_ahb_clk); + if (!cpu_is_mx35()) { + clk_disable(mxc_ahb_clk); + clk_put(mxc_ahb_clk); + } } diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c index e6fedbd5a65..be5fb34d960 100644 --- a/drivers/usb/gadget/pxa25x_udc.c +++ b/drivers/usb/gadget/pxa25x_udc.c @@ -65,6 +65,10 @@ #include <mach/pxa25x-udc.h> #endif +#ifdef CONFIG_ARCH_LUBBOCK +#include <mach/lubbock.h> +#endif + #include <asm/mach/udc_pxa2xx.h> diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index 7e5bf593d38..f742c8e7397 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -30,7 +30,7 @@ #include <plat/regs-usb-hsotg-phy.h> #include <plat/regs-usb-hsotg.h> -#include <plat/regs-sys.h> +#include <mach/regs-sys.h> #include <plat/udc-hs.h> #define DMA_ADDR_INVALID (~((dma_addr_t)0)) diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 3e5b4490c01..1c60053439a 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -400,9 +400,12 @@ config FB_SA1100 If you plan to use the LCD display with your SA-1100 system, say Y here. +config HAVE_FB_IMX + bool + config FB_IMX tristate "Motorola i.MX LCD support" - depends on FB && (ARCH_MX1 || ARCH_MX2) + depends on FB && (HAVE_FB_IMX || ARCH_MX1 || ARCH_MX2) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT diff --git a/sound/arm/pxa2xx-ac97-lib.c b/sound/arm/pxa2xx-ac97-lib.c index 6fdca97186e..88eec3847df 100644 --- a/sound/arm/pxa2xx-ac97-lib.c +++ b/sound/arm/pxa2xx-ac97-lib.c @@ -22,7 +22,6 @@ #include <asm/irq.h> #include <mach/regs-ac97.h> -#include <mach/pxa2xx-gpio.h> #include <mach/audio.h> static DEFINE_MUTEX(car_mutex); @@ -32,6 +31,8 @@ static struct clk *ac97_clk; static struct clk *ac97conf_clk; static int reset_gpio; +extern void pxa27x_assert_ac97reset(int reset_gpio, int on); + /* * Beware PXA27x bugs: * @@ -42,45 +43,6 @@ static int reset_gpio; * 1 jiffy timeout if interrupt never comes). */ -enum { - RESETGPIO_FORCE_HIGH, - RESETGPIO_FORCE_LOW, - RESETGPIO_NORMAL_ALTFUNC -}; - -/** - * set_resetgpio_mode - computes and sets the AC97_RESET gpio mode on PXA - * @mode: chosen action - * - * As the PXA27x CPUs suffer from a AC97 bug, a manual control of the reset line - * must be done to insure proper work of AC97 reset line. This function - * computes the correct gpio_mode for further use by reset functions, and - * applied the change through pxa_gpio_mode. - */ -static void set_resetgpio_mode(int resetgpio_action) -{ - int mode = 0; - - if (reset_gpio) - switch (resetgpio_action) { - case RESETGPIO_NORMAL_ALTFUNC: - if (reset_gpio == 113) - mode = 113 | GPIO_ALT_FN_2_OUT; - if (reset_gpio == 95) - mode = 95 | GPIO_ALT_FN_1_OUT; - break; - case RESETGPIO_FORCE_LOW: - mode = reset_gpio | GPIO_OUT | GPIO_DFLT_LOW; - break; - case RESETGPIO_FORCE_HIGH: - mode = reset_gpio | GPIO_OUT | GPIO_DFLT_HIGH; - break; - }; - - if (mode) - pxa_gpio_mode(mode); -} - unsigned short pxa2xx_ac97_read(struct snd_ac97 *ac97, unsigned short reg) { unsigned short val = -1; @@ -174,12 +136,11 @@ static inline void pxa_ac97_warm_pxa27x(void) { gsr_bits = 0; - /* warm reset broken on Bulverde, - so manually keep AC97 reset high */ - set_resetgpio_mode(RESETGPIO_FORCE_HIGH); + /* warm reset broken on Bulverde, so manually keep AC97 reset high */ + pxa27x_assert_ac97reset(reset_gpio, 1); udelay(10); GCR |= GCR_WARM_RST; - set_resetgpio_mode(RESETGPIO_NORMAL_ALTFUNC); + pxa27x_assert_ac97reset(reset_gpio, 0); udelay(500); } @@ -345,16 +306,6 @@ EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_suspend); int pxa2xx_ac97_hw_resume(void) { - if (cpu_is_pxa25x() || cpu_is_pxa27x()) { - pxa_gpio_mode(GPIO31_SYNC_AC97_MD); - pxa_gpio_mode(GPIO30_SDATA_OUT_AC97_MD); - pxa_gpio_mode(GPIO28_BITCLK_AC97_MD); - pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD); - } - if (cpu_is_pxa27x()) { - /* Use GPIO 113 or 95 as AC97 Reset on Bulverde */ - set_resetgpio_mode(RESETGPIO_NORMAL_ALTFUNC); - } clk_enable(ac97_clk); return 0; } @@ -386,16 +337,9 @@ int __devinit pxa2xx_ac97_hw_probe(struct platform_device *dev) reset_gpio = 113; } - if (cpu_is_pxa25x() || cpu_is_pxa27x()) { - pxa_gpio_mode(GPIO31_SYNC_AC97_MD); - pxa_gpio_mode(GPIO30_SDATA_OUT_AC97_MD); - pxa_gpio_mode(GPIO28_BITCLK_AC97_MD); - pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD); - } - if (cpu_is_pxa27x()) { /* Use GPIO 113 as AC97 Reset on Bulverde */ - set_resetgpio_mode(RESETGPIO_NORMAL_ALTFUNC); + pxa27x_assert_ac97reset(reset_gpio, 0); ac97conf_clk = clk_get(&dev->dev, "AC97CONFCLK"); if (IS_ERR(ac97conf_clk)) { ret = PTR_ERR(ac97conf_clk); diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c index e69397f40f7..9e95e5117c8 100644 --- a/sound/soc/pxa/pxa-ssp.c +++ b/sound/soc/pxa/pxa-ssp.c @@ -42,11 +42,14 @@ * SSP audio private data */ struct ssp_priv { - struct ssp_dev dev; + struct ssp_device *ssp; unsigned int sysclk; int dai_fmt; #ifdef CONFIG_PM - struct ssp_state state; + uint32_t cr0; + uint32_t cr1; + uint32_t to; + uint32_t psp; #endif }; @@ -61,6 +64,22 @@ static void dump_registers(struct ssp_device *ssp) ssp_read_reg(ssp, SSACD)); } +static void ssp_enable(struct ssp_device *ssp) +{ + uint32_t sscr0; + + sscr0 = __raw_readl(ssp->mmio_base + SSCR0) | SSCR0_SSE; + __raw_writel(sscr0, ssp->mmio_base + SSCR0); +} + +static void ssp_disable(struct ssp_device *ssp) +{ + uint32_t sscr0; + + sscr0 = __raw_readl(ssp->mmio_base + SSCR0) & ~SSCR0_SSE; + __raw_writel(sscr0, ssp->mmio_base + SSCR0); +} + struct pxa2xx_pcm_dma_data { struct pxa2xx_pcm_dma_params params; char name[20]; @@ -94,13 +113,12 @@ static int pxa_ssp_startup(struct snd_pcm_substream *substream, struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; struct ssp_priv *priv = cpu_dai->private_data; + struct ssp_device *ssp = priv->ssp; int ret = 0; if (!cpu_dai->active) { - priv->dev.port = cpu_dai->id + 1; - priv->dev.irq = NO_IRQ; - clk_enable(priv->dev.ssp->clk); - ssp_disable(&priv->dev); + clk_enable(ssp->clk); + ssp_disable(ssp); } if (cpu_dai->dma_data) { @@ -116,10 +134,11 @@ static void pxa_ssp_shutdown(struct snd_pcm_substream *substream, struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; struct ssp_priv *priv = cpu_dai->private_data; + struct ssp_device *ssp = priv->ssp; if (!cpu_dai->active) { - ssp_disable(&priv->dev); - clk_disable(priv->dev.ssp->clk); + ssp_disable(ssp); + clk_disable(ssp->clk); } if (cpu_dai->dma_data) { @@ -133,27 +152,39 @@ static void pxa_ssp_shutdown(struct snd_pcm_substream *substream, static int pxa_ssp_suspend(struct snd_soc_dai *cpu_dai) { struct ssp_priv *priv = cpu_dai->private_data; + struct ssp_device *ssp = priv->ssp; if (!cpu_dai->active) - clk_enable(priv->dev.ssp->clk); + clk_enable(ssp->clk); - ssp_save_state(&priv->dev, &priv->state); - clk_disable(priv->dev.ssp->clk); + priv->cr0 = __raw_readl(ssp->mmio_base + SSCR0); + priv->cr1 = __raw_readl(ssp->mmio_base + SSCR1); + priv->to = __raw_readl(ssp->mmio_base + SSTO); + priv->psp = __raw_readl(ssp->mmio_base + SSPSP); + ssp_disable(ssp); + clk_disable(ssp->clk); return 0; } static int pxa_ssp_resume(struct snd_soc_dai *cpu_dai) { struct ssp_priv *priv = cpu_dai->private_data; + struct ssp_device *ssp = priv->ssp; + uint32_t sssr = SSSR_ROR | SSSR_TUR | SSSR_BCE; + + clk_enable(ssp->clk); - clk_enable(priv->dev.ssp->clk); - ssp_restore_state(&priv->dev, &priv->state); + __raw_writel(sssr, ssp->mmio_base + SSSR); + __raw_writel(priv->cr0 & ~SSCR0_SSE, ssp->mmio_base + SSCR0); + __raw_writel(priv->cr1, ssp->mmio_base + SSCR1); + __raw_writel(priv->to, ssp->mmio_base + SSTO); + __raw_writel(priv->psp, ssp->mmio_base + SSPSP); if (cpu_dai->active) - ssp_enable(&priv->dev); + ssp_enable(ssp); else - clk_disable(priv->dev.ssp->clk); + clk_disable(ssp->clk); return 0; } @@ -203,7 +234,7 @@ static int pxa_ssp_set_dai_sysclk(struct snd_soc_dai *cpu_dai, int clk_id, unsigned int freq, int dir) { struct ssp_priv *priv = cpu_dai->private_data; - struct ssp_device *ssp = priv->dev.ssp; + struct ssp_device *ssp = priv->ssp; int val; u32 sscr0 = ssp_read_reg(ssp, SSCR0) & @@ -244,11 +275,11 @@ static int pxa_ssp_set_dai_sysclk(struct snd_soc_dai *cpu_dai, /* The SSP clock must be disabled when changing SSP clock mode * on PXA2xx. On PXA3xx it must be enabled when doing so. */ if (!cpu_is_pxa3xx()) - clk_disable(priv->dev.ssp->clk); + clk_disable(ssp->clk); val = ssp_read_reg(ssp, SSCR0) | sscr0; ssp_write_reg(ssp, SSCR0, val); if (!cpu_is_pxa3xx()) - clk_enable(priv->dev.ssp->clk); + clk_enable(ssp->clk); return 0; } @@ -260,7 +291,7 @@ static int pxa_ssp_set_dai_clkdiv(struct snd_soc_dai *cpu_dai, int div_id, int div) { struct ssp_priv *priv = cpu_dai->private_data; - struct ssp_device *ssp = priv->dev.ssp; + struct ssp_device *ssp = priv->ssp; int val; switch (div_id) { @@ -311,7 +342,7 @@ static int pxa_ssp_set_dai_pll(struct snd_soc_dai *cpu_dai, int pll_id, int source, unsigned int freq_in, unsigned int freq_out) { struct ssp_priv *priv = cpu_dai->private_data; - struct ssp_device *ssp = priv->dev.ssp; + struct ssp_device *ssp = priv->ssp; u32 ssacd = ssp_read_reg(ssp, SSACD) & ~0x70; #if defined(CONFIG_PXA3xx) @@ -380,7 +411,7 @@ static int pxa_ssp_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai, unsigned int tx_mask, unsigned int rx_mask, int slots, int slot_width) { struct ssp_priv *priv = cpu_dai->private_data; - struct ssp_device *ssp = priv->dev.ssp; + struct ssp_device *ssp = priv->ssp; u32 sscr0; sscr0 = ssp_read_reg(ssp, SSCR0); @@ -415,7 +446,7 @@ static int pxa_ssp_set_dai_tristate(struct snd_soc_dai *cpu_dai, int tristate) { struct ssp_priv *priv = cpu_dai->private_data; - struct ssp_device *ssp = priv->dev.ssp; + struct ssp_device *ssp = priv->ssp; u32 sscr1; sscr1 = ssp_read_reg(ssp, SSCR1); @@ -437,7 +468,7 @@ static int pxa_ssp_set_dai_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt) { struct ssp_priv *priv = cpu_dai->private_data; - struct ssp_device *ssp = priv->dev.ssp; + struct ssp_device *ssp = priv->ssp; u32 sscr0; u32 sscr1; u32 sspsp; @@ -532,7 +563,7 @@ static int pxa_ssp_hw_params(struct snd_pcm_substream *substream, struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; struct ssp_priv *priv = cpu_dai->private_data; - struct ssp_device *ssp = priv->dev.ssp; + struct ssp_device *ssp = priv->ssp; int chn = params_channels(params); u32 sscr0; u32 sspsp; @@ -642,12 +673,12 @@ static int pxa_ssp_trigger(struct snd_pcm_substream *substream, int cmd, struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; int ret = 0; struct ssp_priv *priv = cpu_dai->private_data; - struct ssp_device *ssp = priv->dev.ssp; + struct ssp_device *ssp = priv->ssp; int val; switch (cmd) { case SNDRV_PCM_TRIGGER_RESUME: - ssp_enable(&priv->dev); + ssp_enable(ssp); break; case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: val = ssp_read_reg(ssp, SSCR1); @@ -666,7 +697,7 @@ static int pxa_ssp_trigger(struct snd_pcm_substream *substream, int cmd, else val |= SSCR1_RSRE; ssp_write_reg(ssp, SSCR1, val); - ssp_enable(&priv->dev); + ssp_enable(ssp); break; case SNDRV_PCM_TRIGGER_STOP: val = ssp_read_reg(ssp, SSCR1); @@ -677,7 +708,7 @@ static int pxa_ssp_trigger(struct snd_pcm_substream *substream, int cmd, ssp_write_reg(ssp, SSCR1, val); break; case SNDRV_PCM_TRIGGER_SUSPEND: - ssp_disable(&priv->dev); + ssp_disable(ssp); break; case SNDRV_PCM_TRIGGER_PAUSE_PUSH: val = ssp_read_reg(ssp, SSCR1); @@ -707,8 +738,8 @@ static int pxa_ssp_probe(struct platform_device *pdev, if (!priv) return -ENOMEM; - priv->dev.ssp = ssp_request(dai->id + 1, "SoC audio"); - if (priv->dev.ssp == NULL) { + priv->ssp = ssp_request(dai->id + 1, "SoC audio"); + if (priv->ssp == NULL) { ret = -ENODEV; goto err_priv; } @@ -727,7 +758,7 @@ static void pxa_ssp_remove(struct platform_device *pdev, struct snd_soc_dai *dai) { struct ssp_priv *priv = dai->private_data; - ssp_free(priv->dev.ssp); + ssp_free(priv->ssp); } #define PXA_SSP_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\ diff --git a/sound/soc/s3c24xx/s3c64xx-i2s.c b/sound/soc/s3c24xx/s3c64xx-i2s.c index 93ed3aad163..a72c251401a 100644 --- a/sound/soc/s3c24xx/s3c64xx-i2s.c +++ b/sound/soc/s3c24xx/s3c64xx-i2s.c @@ -22,8 +22,8 @@ #include <sound/soc.h> #include <plat/regs-s3c2412-iis.h> -#include <plat/gpio-bank-d.h> -#include <plat/gpio-bank-e.h> +#include <mach/gpio-bank-d.h> +#include <mach/gpio-bank-e.h> #include <plat/gpio-cfg.h> #include <mach/map.h> |