Merge master.kernel.org:/pub/scm/linux/kernel/git/sam/kbuild

35 files changed, 547 insertions, 291 deletions

diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt
index 2616a58a5a4..9a1586590d8 100644
--- a/Documentation/kbuild/makefiles.txt
+++ b/Documentation/kbuild/makefiles.txt
@@ -872,7 +872,13 @@ When kbuild executes the following steps are followed (roughly):
 	Assignments to $(targets) are without $(obj)/ prefix.
 	if_changed may be used in conjunction with custom commands as
 	defined in 6.7 "Custom kbuild commands".
+
 	Note: It is a typical mistake to forget the FORCE prerequisite.
+	Another common pitfall is that whitespace is sometimes
+	significant; for instance, the below will fail (note the extra space
+	after the comma):
+		target: source(s) FORCE
+	#WRONG!#	$(call if_changed, ld/objcopy/gzip)
 
     ld
 	Link target. Often LDFLAGS_$@ is used to set specific options to ld.
diff --git a/Makefile b/Makefile
index 2d68adbcfa2..63e5c9f0bc7 100644
--- a/Makefile
+++ b/Makefile
@@ -109,10 +109,9 @@ $(if $(KBUILD_OUTPUT),, \
 .PHONY: $(MAKECMDGOALS)
 
 $(filter-out _all,$(MAKECMDGOALS)) _all:
-	$(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT)		\
-	KBUILD_SRC=$(CURDIR)	     KBUILD_VERBOSE=$(KBUILD_VERBOSE)	\
-	KBUILD_CHECK=$(KBUILD_CHECK) KBUILD_EXTMOD="$(KBUILD_EXTMOD)"	\
-        -f $(CURDIR)/Makefile $@
+	$(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
+	KBUILD_SRC=$(CURDIR) \
+	KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile $@
 
 # Leave processing to above invocation of make
 skip-makefile := 1
@@ -233,7 +232,7 @@ ifeq ($(MAKECMDGOALS),)
   KBUILD_MODULES := 1
 endif
 
-export KBUILD_MODULES KBUILD_BUILTIN KBUILD_VERBOSE
+export KBUILD_MODULES KBUILD_BUILTIN
 export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
 
 # Beautify output
@@ -309,6 +308,9 @@ cc-version = $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-version.sh \
 # Look for make include files relative to root of kernel src
 MAKEFLAGS += --include-dir=$(srctree)
 
+# We need some generic definitions
+include  $(srctree)/scripts/Kbuild.include
+
 # For maximum performance (+ possibly random breakage, uncomment
 # the following)
 
@@ -348,7 +350,7 @@ LINUXINCLUDE    := -Iinclude \
 
 CPPFLAGS        := -D__KERNEL__ $(LINUXINCLUDE)
 
-CFLAGS 		:= -Wall -Wstrict-prototypes -Wno-trigraphs \
+CFLAGS 		:= -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
 	  	   -fno-strict-aliasing -fno-common \
 		   -ffreestanding
 AFLAGS		:= -D__ASSEMBLY__
@@ -367,11 +369,6 @@ export AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
 # even be read-only.
 export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
 
-# The temporary file to save gcc -MD generated dependencies must not
-# contain a comma
-comma := ,
-depfile = $(subst $(comma),_,$(@D)/.$(@F).d)
-
 # Files to ignore in find ... statements
 
 RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS -o -name .pc -o -name .hg \) -prune -o
@@ -551,6 +548,26 @@ export KBUILD_IMAGE ?= vmlinux
 # images. Default is /boot, but you can set it to other values
 export	INSTALL_PATH ?= /boot
 
+# If CONFIG_LOCALVERSION_AUTO is set, we automatically perform some tests
+# and try to determine if the current source tree is a release tree, of any sort,
+# or if is a pure development tree.
+#
+# A 'release tree' is any tree with a git TAG associated
+# with it.  The primary goal of this is to make it safe for a native
+# git/CVS/SVN user to build a release tree (i.e, 2.6.9) and also to
+# continue developing against the current Linus tree, without having the Linus
+# tree overwrite the 2.6.9 tree when installed.
+#
+# Currently, only git is supported.
+# Other SCMs can edit scripts/setlocalversion and add the appropriate
+# checks as needed.
+
+
+ifdef CONFIG_LOCALVERSION_AUTO
+	localversion-auto := $(shell $(PERL) $(srctree)/scripts/setlocalversion $(srctree))
+	LOCALVERSION := $(LOCALVERSION)$(localversion-auto)
+endif
+
 #
 # INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory
 # relocations required by build roots.  This is not defined in the
@@ -691,8 +708,10 @@ endef
 
 # Update vmlinux version before link
 # Use + in front of this rule to silent warning about make -j1
+# First command is ':' to allow us to use + in front of this rule
 cmd_ksym_ld = $(cmd_vmlinux__)
 define rule_ksym_ld
+	: 
 	+$(call cmd,vmlinux_version)
 	$(call cmd,vmlinux__)
 	$(Q)echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd
@@ -722,6 +741,16 @@ quiet_cmd_kallsyms = KSYM    $@
 # Needs to visit scripts/ before $(KALLSYMS) can be used.
 $(KALLSYMS): scripts ;
 
+# Generate some data for debugging strange kallsyms problems
+debug_kallsyms: .tmp_map$(last_kallsyms)
+
+.tmp_map%: .tmp_vmlinux% FORCE
+	($(OBJDUMP) -h $< | $(AWK) '/^ +[0-9]/{print $$4 " 0 " $$2}'; $(NM) $<) | sort > $@
+
+.tmp_map3: .tmp_map2
+
+.tmp_map2: .tmp_map1
+
 endif # ifdef CONFIG_KALLSYMS
 
 # vmlinux image - including updated kernel symbols
@@ -757,7 +786,7 @@ $(vmlinux-dirs): prepare-all scripts
 prepare2:
 ifneq ($(KBUILD_SRC),)
 	@echo '  Using $(srctree) as source for kernel'
-	$(Q)if [ -h $(srctree)/include/asm -o -f $(srctree)/.config ]; then \
+	$(Q)if [ -f $(srctree)/.config ]; then \
 		echo "  $(srctree) is not clean, please run 'make mrproper'";\
 		echo "  in the '$(srctree)' directory.";\
 		/bin/false; \
@@ -769,7 +798,8 @@ endif
 # prepare1 creates a makefile if using a separate output directory
 prepare1: prepare2 outputmakefile
 
-prepare0: prepare1 include/linux/version.h include/asm include/config/MARKER
+prepare0: prepare1 include/linux/version.h include/asm \
+                   include/config/MARKER
 ifneq ($(KBUILD_MODULES),)
 	$(Q)rm -rf $(MODVERDIR)
 	$(Q)mkdir -p $(MODVERDIR)
@@ -875,7 +905,7 @@ modules_install: _modinst_ _modinst_post
 
 .PHONY: _modinst_
 _modinst_:
-	@if [ -z "`$(DEPMOD) -V | grep module-init-tools`" ]; then \
+	@if [ -z "`$(DEPMOD) -V 2>/dev/null | grep module-init-tools`" ]; then \
 		echo "Warning: you may need to install module-init-tools"; \
 		echo "See http://www.codemonkey.org.uk/docs/post-halloween-2.6.txt";\
 		sleep 1; \
@@ -1159,37 +1189,49 @@ else
 __srctree = $(srctree)/
 endif
 
+ALLSOURCE_ARCHS := $(ARCH)
+
 define all-sources
 	( find $(__srctree) $(RCS_FIND_IGNORE) \
 	       \( -name include -o -name arch \) -prune -o \
 	       -name '*.[chS]' -print; \
-	  find $(__srctree)arch/$(ARCH) $(RCS_FIND_IGNORE) \
-	       -name '*.[chS]' -print; \
+	  for ARCH in $(ALLSOURCE_ARCHS) ; do \
+	       find $(__srctree)arch/$${ARCH} $(RCS_FIND_IGNORE) \
+	            -name '*.[chS]' -print; \
+	  done ; \
 	  find $(__srctree)security/selinux/include $(RCS_FIND_IGNORE) \
 	       -name '*.[chS]' -print; \
 	  find $(__srctree)include $(RCS_FIND_IGNORE) \
 	       \( -name config -o -name 'asm-*' \) -prune \
 	       -o -name '*.[chS]' -print; \
-	  find $(__srctree)include/asm-$(ARCH) $(RCS_FIND_IGNORE) \
-	       -name '*.[chS]' -print; \
+	  for ARCH in $(ALLSOURCE_ARCHS) ; do \
+	       find $(__srctree)include/asm-$${ARCH} $(RCS_FIND_IGNORE) \
+	            -name '*.[chS]' -print; \
+	  done ; \
 	  find $(__srctree)include/asm-generic $(RCS_FIND_IGNORE) \
 	       -name '*.[chS]' -print )
 endef
 
 quiet_cmd_cscope-file = FILELST cscope.files
-      cmd_cscope-file = $(all-sources) > cscope.files
+      cmd_cscope-file = (echo \-k; echo \-q; $(all-sources)) > cscope.files
 
 quiet_cmd_cscope = MAKE    cscope.out
-      cmd_cscope = cscope -k -b -q
+      cmd_cscope = cscope -b
 
 cscope: FORCE
 	$(call cmd,cscope-file)
 	$(call cmd,cscope)
 
 quiet_cmd_TAGS = MAKE   $@
-cmd_TAGS = $(all-sources) | etags -
+define cmd_TAGS
+	rm -f $@; \
+	ETAGSF=`etags --version | grep -i exuberant >/dev/null && echo "-I __initdata,__exitdata,EXPORT_SYMBOL,EXPORT_SYMBOL_GPL --extra=+f"`; \
+	$(all-sources) | xargs etags $$ETAGSF -a
+endef
+
+TAGS: FORCE
+	$(call cmd,TAGS)
 
-# 	Exuberant ctags works better with -I
 
 quiet_cmd_tags = MAKE   $@
 define cmd_tags
@@ -1198,9 +1240,6 @@ define cmd_tags
 	$(all-sources) | xargs ctags $$CTAGSF -a
 endef
 
-TAGS: FORCE
-	$(call cmd,TAGS)
-
 tags: FORCE
 	$(call cmd,tags)
 
@@ -1268,82 +1307,11 @@ ifneq ($(cmd_files),)
   include $(cmd_files)
 endif
 
-# Execute command and generate cmd file
-if_changed = $(if $(strip $? \
-		          $(filter-out $(cmd_$(1)),$(cmd_$@))\
-			  $(filter-out $(cmd_$@),$(cmd_$(1)))),\
-	@set -e; \
-	$(if $($(quiet)cmd_$(1)),echo '  $(subst ','\'',$($(quiet)cmd_$(1)))';) \
-	$(cmd_$(1)); \
-	echo 'cmd_$@ := $(subst $$,$$$$,$(subst ','\'',$(cmd_$(1))))' > $(@D)/.$(@F).cmd)
-
-
-# execute the command and also postprocess generated .d dependencies
-# file
-if_changed_dep = $(if $(strip $? $(filter-out FORCE $(wildcard $^),$^)\
-		          $(filter-out $(cmd_$(1)),$(cmd_$@))\
-			  $(filter-out $(cmd_$@),$(cmd_$(1)))),\
-	$(Q)set -e; \
-	$(if $($(quiet)cmd_$(1)),echo '  $(subst ','\'',$($(quiet)cmd_$(1)))';) \
-	$(cmd_$(1)); \
-	scripts/basic/fixdep $(depfile) $@ '$(subst $$,$$$$,$(subst ','\'',$(cmd_$(1))))' > $(@D)/.$(@F).tmp; \
-	rm -f $(depfile); \
-	mv -f $(@D)/.$(@F).tmp $(@D)/.$(@F).cmd)
-
-# Usage: $(call if_changed_rule,foo)
-# will check if $(cmd_foo) changed, or any of the prequisites changed,
-# and if so will execute $(rule_foo)
-
-if_changed_rule = $(if $(strip $? \
-		               $(filter-out $(cmd_$(1)),$(cmd_$(@F)))\
-			       $(filter-out $(cmd_$(@F)),$(cmd_$(1)))),\
-	               $(Q)$(rule_$(1)))
-
-# If quiet is set, only print short version of command
-
-cmd = @$(if $($(quiet)cmd_$(1)),echo '  $($(quiet)cmd_$(1))' &&) $(cmd_$(1))
-
-# filechk is used to check if the content of a generated file is updated.
-# Sample usage:
-# define filechk_sample
-#	echo $KERNELRELEASE
-# endef
-# version.h : Makefile
-#	$(call filechk,sample)
-# The rule defined shall write to stdout the content of the new file.
-# The existing file will be compared with the new one.
-# - If no file exist it is created
-# - If the content differ the new file is used
-# - If they are equal no change, and no timestamp update
-
-define filechk
-	@set -e;				\
-	echo '  CHK     $@';			\
-	mkdir -p $(dir $@);			\
-	$(filechk_$(1)) < $< > $@.tmp;		\
-	if [ -r $@ ] && cmp -s $@ $@.tmp; then	\
-		rm -f $@.tmp;			\
-	else					\
-		echo '  UPD     $@';		\
-		mv -f $@.tmp $@;		\
-	fi
-endef
-
-# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.build obj=dir
-# Usage:
-# $(Q)$(MAKE) $(build)=dir
-build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj
-
 # Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir
 # Usage:
 # $(Q)$(MAKE) $(clean)=dir
 clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
 
-#	$(call descend,<dir>,<target>)
-#	Recursively call a sub-make in <dir> with target <target>
-# Usage is deprecated, because make does not see this as an invocation of make.
-descend =$(Q)$(MAKE) -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj=$(1) $(2)
-
 endif	# skip-makefile
 
 FORCE:
diff --git a/arch/m68knommu/Makefile b/arch/m68knommu/Makefile
index 97022ed0da3..7ce5e55b240 100644
--- a/arch/m68knommu/Makefile
+++ b/arch/m68knommu/Makefile
@@ -114,7 +114,7 @@ libs-y	+= arch/m68knommu/lib/
 prepare: include/asm-$(ARCH)/asm-offsets.h
 
 archclean:
-	$(call descend arch/$(ARCH)/boot, subdirclean)
+	$(Q)$(MAKE) $(clean)=arch/m68knommu/boot
 
 include/asm-$(ARCH)/asm-offsets.h: arch/$(ARCH)/kernel/asm-offsets.s \
 				   include/asm include/linux/version.h \
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index d27b8259548..b0fdaee8d8d 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -673,7 +673,7 @@ drivers-$(CONFIG_OPROFILE)	+= arch/mips/oprofile/
 
 ifdef CONFIG_LASAT
 rom.bin rom.sw: vmlinux
-	$(call descend,arch/mips/lasat/image,$@)
+	$(Q)$(MAKE) $(build)=arch/mips/lasat/image $@
 endif
 
 #
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index 879036d4b30..6b736364cc5 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -408,48 +408,6 @@ config BLK_DEV_INITRD
 	  "real" root file system, etc. See <file:Documentation/initrd.txt>
 	  for details.
 
-config INITRAMFS_SOURCE
-	string "Initramfs source file(s)"
-	default ""
-	help
-	  This can be either a single cpio archive with a .cpio suffix or a
-	  space-separated list of directories and files for building the
-	  initramfs image.  A cpio archive should contain a filesystem archive
-	  to be used as an initramfs image.  Directories should contain a
-	  filesystem layout to be included in the initramfs image.  Files
-	  should contain entries according to the format described by the
-	  "usr/gen_init_cpio" program in the kernel tree.
-
-	  When multiple directories and files are specified then the
-	  initramfs image will be the aggregate of all of them.
-
-	  See <file:Documentation/early-userspace/README for more details.
-
-	  If you are not sure, leave it blank.
-
-config INITRAMFS_ROOT_UID
-	int "User ID to map to 0 (user root)"
-	depends on INITRAMFS_SOURCE!=""
-	default "0"
-	help
-	  This setting is only meaningful if the INITRAMFS_SOURCE is
-	  contains a directory.  Setting this user ID (UID) to something
-	  other than "0" will cause all files owned by that UID to be
-	  owned by user root in the initial ramdisk image.
-
-	  If you are not sure, leave it set to "0".
-
-config INITRAMFS_ROOT_GID
-	int "Group ID to map to 0 (group root)"
-	depends on INITRAMFS_SOURCE!=""
-	default "0"
-	help
-	  This setting is only meaningful if the INITRAMFS_SOURCE is
-	  contains a directory.  Setting this group ID (GID) to something
-	  other than "0" will cause all files owned by that GID to be
-	  owned by group root in the initial ramdisk image.
-
-	  If you are not sure, leave it set to "0".
 
 #XXX - it makes sense to enable this only for 32-bit subarch's, not for x86_64
 #for instance.
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index b3bb326ae5b..3fa94288aa9 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -6,6 +6,9 @@
 #define VMLINUX_SYMBOL(_sym_) _sym_
 #endif
 
+/* Align . to a 8 byte boundary equals to maximum function alignment. */
+#define ALIGN_FUNCTION()  . = ALIGN(8)
+
 #define RODATA								\
 	.rodata           : AT(ADDR(.rodata) - LOAD_OFFSET) {		\
 		*(.rodata) *(.rodata.*)					\
@@ -79,12 +82,18 @@
 		VMLINUX_SYMBOL(__security_initcall_end) = .;		\
 	}
 
+/* sched.text is aling to function alignment to secure we have same
+ * address even at second ld pass when generating System.map */
 #define SCHED_TEXT							\
+		ALIGN_FUNCTION();					\
 		VMLINUX_SYMBOL(__sched_text_start) = .;			\
 		*(.sched.text)						\
 		VMLINUX_SYMBOL(__sched_text_end) = .;
 
+/* spinlock.text is aling to function alignment to secure we have same
+ * address even at second ld pass when generating System.map */
 #define LOCK_TEXT							\
+		ALIGN_FUNCTION();					\
 		VMLINUX_SYMBOL(__lock_text_start) = .;			\
 		*(.spinlock.text)					\
 		VMLINUX_SYMBOL(__lock_text_end) = .;
diff --git a/init/Kconfig b/init/Kconfig
index 05a75c4f5ce..d5a1a1228fa 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -77,6 +77,22 @@ config LOCALVERSION
 	  object and source tree, in that order.  Your total string can
 	  be a maximum of 64 characters.
 
+config LOCALVERSION_AUTO
+	bool "Automatically append version information to the version string"
+	default y
+	help
+	  This will try to automatically determine if the current tree is a
+	  release tree by looking for git tags that
+	  belong to the current top of tree revision.
+
+	  A string of the format -gxxxxxxxx will be added to the localversion
+	  if a git based tree is found.  The string generated by this will be
+	  appended after any matching localversion* files, and after the value
+	  set in CONFIG_LOCALVERSION
+
+	  Note: This requires Perl, and a git repository, but not necessarily
+	  the git or cogito tools to be installed.
+
 config SWAP
 	bool "Support for paging of anonymous memory (swap)"
 	depends on MMU
@@ -238,6 +254,8 @@ config CPUSETS
 
 	  Say N if unsure.
 
+source "usr/Kconfig"
+
 menuconfig EMBEDDED
 	bool "Configure standard kernel features (for small systems)"
 	help
@@ -260,8 +278,8 @@ config KALLSYMS_ALL
 	help
 	   Normally kallsyms only contains the symbols of functions, for nicer
 	   OOPS messages.  Some debuggers can use kallsyms for other
-	   symbols too: say Y here to include all symbols, and you
-	   don't care about adding 300k to the size of your kernel.
+	   symbols too: say Y here to include all symbols, if you need them 
+	   and you don't care about adding 300k to the size of your kernel.
 
 	   Say N.
 
diff --git a/init/Makefile b/init/Makefile
index 93a53fbdbe7..a2300078f2b 100644
--- a/init/Makefile
+++ b/init/Makefile
@@ -25,4 +25,5 @@ $(obj)/version.o: include/linux/compile.h
 
 include/linux/compile.h: FORCE
 	@echo '  CHK     $@'
-	@$(CONFIG_SHELL) $(srctree)/scripts/mkcompile_h $@ "$(UTS_MACHINE)" "$(CONFIG_SMP)" "$(CC) $(CFLAGS)"
+	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkcompile_h $@ \
+	"$(UTS_MACHINE)" "$(CONFIG_SMP)" "$(CONFIG_PREEMPT)" "$(CC) $(CFLAGS)"
diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include
new file mode 100644
index 00000000000..9087273abf9
--- /dev/null
+++ b/scripts/Kbuild.include
@@ -0,0 +1,96 @@
+####
+# kbuild: Generic definitions
+
+# Convinient variables
+comma   := ,
+empty   :=
+space   := $(empty) $(empty)
+
+###
+# The temporary file to save gcc -MD generated dependencies must not
+# contain a comma
+depfile = $(subst $(comma),_,$(@D)/.$(@F).d)
+
+###
+# filechk is used to check if the content of a generated file is updated.
+# Sample usage:
+# define filechk_sample
+#	echo $KERNELRELEASE
+# endef
+# version.h : Makefile
+#	$(call filechk,sample)
+# The rule defined shall write to stdout the content of the new file.
+# The existing file will be compared with the new one.
+# - If no file exist it is created
+# - If the content differ the new file is used
+# - If they are equal no change, and no timestamp update
+# - stdin is piped in from the first prerequisite ($<) so one has
+#   to specify a valid file as first prerequisite (often the kbuild file)
+define filechk
+	$(Q)set -e;				\
+	echo '  CHK     $@';			\
+	mkdir -p $(dir $@);			\
+	$(filechk_$(1)) < $< > $@.tmp;		\
+	if [ -r $@ ] && cmp -s $@ $@.tmp; then	\
+		rm -f $@.tmp;			\
+	else					\
+		echo '  UPD     $@';		\
+		mv -f $@.tmp $@;		\
+	fi
+endef
+
+###
+# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.build obj=
+# Usage:
+# $(Q)$(MAKE) $(build)=dir
+build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj
+
+# If quiet is set, only print short version of command
+cmd = @$(if $($(quiet)cmd_$(1)),\
+      echo '  $(subst ','\'',$($(quiet)cmd_$(1)))' &&) $(cmd_$(1))
+
+###
+# if_changed      - execute command if any prerequisite is newer than 
+#                   target, or command line has changed
+# if_changed_dep  - as if_changed, but uses fixdep to reveal dependencies
+#                   including used config symbols
+# if_changed_rule - as if_changed but execute rule instead
+# See Documentation/kbuild/makefiles.txt for more info
+
+ifneq ($(KBUILD_NOCMDDEP),1)
+# Check if both arguments has same arguments. Result in empty string if equal
+# User may override this check using make KBUILD_NOCMDDEP=1
+arg-check = $(strip $(filter-out $(1), $(2)) $(filter-out $(2), $(1)) )
+endif
+
+# echo command. Short version is $(quiet) equals quiet, otherwise full command
+echo-cmd = $(if $($(quiet)cmd_$(1)), \
+	echo '  $(subst ','\'',$($(quiet)cmd_$(1)))';)
+
+# function to only execute the passed command if necessary
+# >'< substitution is for echo to work, >$< substitution to preserve $ when reloading .cmd file
+# note: when using inline perl scripts [perl -e '...$$t=1;...'] in $(cmd_xxx) double $$ your perl vars
+# 
+if_changed = $(if $(strip $? $(call arg-check, $(cmd_$(1)), $(cmd_$@)) ), \
+	@set -e; \
+	$(echo-cmd) \
+	$(cmd_$(1)); \
+	echo 'cmd_$@ := $(subst $$,$$$$,$(subst ','\'',$(cmd_$(1))))' > $(@D)/.$(@F).cmd)
+
+# execute the command and also postprocess generated .d dependencies
+# file
+if_changed_dep = $(if $(strip $? $(filter-out FORCE $(wildcard $^),$^)\
+	$(call arg-check, $(cmd_$(1)), $(cmd_$@)) ),                  \
+	@set -e; \
+	$(echo-cmd) \
+	$(cmd_$(1)); \
+	scripts/basic/fixdep $(depfile) $@ '$(subst $$,$$$$,$(subst ','\'',$(cmd_$(1))))' > $(@D)/.$(@F).tmp; \
+	rm -f $(depfile); \
+	mv -f $(@D)/.$(@F).tmp $(@D)/.$(@F).cmd)
+
+# Usage: $(call if_changed_rule,foo)
+# will check if $(cmd_foo) changed, or any of the prequisites changed,
+# and if so will execute $(rule_foo)
+if_changed_rule = $(if $(strip $? $(call arg-check, $(cmd_$(1)), $(cmd_$@)) ),\
+			@set -e; \
+			$(rule_$(1)))
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index 76ba6be3dfc..506e3f3befe 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -10,8 +10,11 @@ __build:
 # Read .config if it exist, otherwise ignore
 -include .config
 
-include $(if $(wildcard $(obj)/Kbuild), $(obj)/Kbuild, $(obj)/Makefile)
+# The filename Kbuild has precedence over Makefile
+kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src))
+include $(if $(wildcard $(kbuild-dir)/Kbuild), $(kbuild-dir)/Kbuild, $(kbuild-dir)/Makefile)
 
+include scripts/Kbuild.include
 include scripts/Makefile.lib
 
 ifdef host-progs
@@ -169,7 +172,7 @@ cmd_modversions =							\
 			-T $(@D)/.tmp_$(@F:.o=.ver);			\
 		rm -f $(@D)/.tmp_$(@F) $(@D)/.tmp_$(@F:.o=.ver);	\
 	else								\
-		mv $(@D)/.tmp_$(@F) $@;					\
+		mv -f $(@D)/.tmp_$(@F) $@;				\
 	fi;
 endif
 
diff --git a/scripts/Makefile.clean b/scripts/Makefile.clean
index ff3e87dbf38..8974ea5fc87 100644
--- a/scripts/Makefile.clean
+++ b/scripts/Makefile.clean
@@ -7,7 +7,14 @@ src := $(obj)
 .PHONY: __clean
 __clean:
 
-include $(if $(wildcard $(obj)/Kbuild), $(obj)/Kbuild, $(obj)/Makefile)
+# Shorthand for $(Q)$(MAKE) scripts/Makefile.clean obj=dir
+# Usage:
+# $(Q)$(MAKE) $(clean)=dir
+clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
+
+# The filename Kbuild has precedence over Makefile
+kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src))
+include $(if $(wildcard $(kbuild-dir)/Kbuild), $(kbuild-dir)/Kbuild, $(kbuild-dir)/Makefile)
 
 # Figure out what we need to build from the various variables
 # ==========================================================================
@@ -87,8 +94,3 @@ $(subdir-ymn):
 # If quiet is set, only print short version of command
 
 cmd = @$(if $($(quiet)cmd_$(1)),echo '  $($(quiet)cmd_$(1))' &&) $(cmd_$(1))
-
-# Shorthand for $(Q)$(MAKE) scripts/Makefile.clean obj=dir
-# Usage:
-# $(Q)$(MAKE) $(clean)=dir
-clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
diff --git a/scripts/Makefile.host b/scripts/Makefile.host
index 2821a2b83bb..2d519704b8f 100644
--- a/scripts/Makefile.host
+++ b/scripts/Makefile.host
@@ -98,7 +98,8 @@ hostcxx_flags  = -Wp,-MD,$(depfile) $(__hostcxx_flags)
 # Create executable from a single .c file
 # host-csingle -> Executable
 quiet_cmd_host-csingle 	= HOSTCC  $@
-      cmd_host-csingle	= $(HOSTCC) $(hostc_flags) $(HOST_LOADLIBES) -o $@ $<
+      cmd_host-csingle	= $(HOSTCC) $(hostc_flags) -o $@ $< \
+	  	$(HOST_LOADLIBES) $(HOSTLOADLIBES_$(@F))
 $(host-csingle): %: %.c FORCE
 	$(call if_changed_dep,host-csingle)
 
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index 7cf75cc4f84..0f81dcfd690 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -1,13 +1,3 @@
-# ===========================================================================
-# kbuild: Generic definitions
-# ===========================================================================
-
-# Standard vars
-
-comma   := ,
-empty   :=
-space   := $(empty) $(empty)
-
 # Backward compatibility - to be removed...
 extra-y	+= $(EXTRA_TARGETS)
 # Figure out what we need to build from the various variables
@@ -84,10 +74,6 @@ multi-objs-m	:= $(addprefix $(obj)/,$(multi-objs-m))
 subdir-ym	:= $(addprefix $(obj)/,$(subdir-ym))
 obj-dirs	:= $(addprefix $(obj)/,$(obj-dirs))
 
-# The temporary file to save gcc -MD generated dependencies must not
-# contain a comma
-depfile = $(subst $(comma),_,$(@D)/.$(@F).d)
-
 # These flags are needed for modversions and compiling, so we define them here
 # already
 # $(modname_flags) #defines KBUILD_MODNAME as the name of the module it will 
@@ -179,89 +165,4 @@ cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
 quiet_cmd_gzip = GZIP    $@
 cmd_gzip = gzip -f -9 < $< > $@
 
-# ===========================================================================
-# Generic stuff
-# ===========================================================================
-
-ifneq ($(KBUILD_NOCMDDEP),1)
-# Check if both arguments has same arguments. Result in empty string if equal
-# User may override this check using make KBUILD_NOCMDDEP=1
-arg-check = $(strip $(filter-out $(1), $(2)) $(filter-out $(2), $(1)) )
-
-endif
-
-# echo command. Short version is $(quiet) equals quiet, otherwise full command
-echo-cmd = $(if $($(quiet)cmd_$(1)), \
-	echo '  $(subst ','\'',$($(quiet)cmd_$(1)))';)
-
-# function to only execute the passed command if necessary
-# >'< substitution is for echo to work, >$< substitution to preserve $ when reloading .cmd file
-# note: when using inline perl scripts [perl -e '...$$t=1;...'] in $(cmd_xxx) double $$ your perl vars
-# 
-if_changed = $(if $(strip $? $(call arg-check, $(cmd_$(1)), $(cmd_$@)) ), \
-	@set -e; \
-	$(echo-cmd) \
-	$(cmd_$(1)); \
-	echo 'cmd_$@ := $(subst $$,$$$$,$(subst ','\'',$(cmd_$(1))))' > $(@D)/.$(@F).cmd)
-
-
-# execute the command and also postprocess generated .d dependencies
-# file
-
-if_changed_dep = $(if $(strip $? $(filter-out FORCE $(wildcard $^),$^)\
-	$(call arg-check, $(cmd_$(1)), $(cmd_$@)) ),                  \
-	@set -e; \
-	$(echo-cmd) \
-	$(cmd_$(1)); \
-	scripts/basic/fixdep $(depfile) $@ '$(subst $$,$$$$,$(subst ','\'',$(cmd_$(1))))' > $(@D)/.$(@F).tmp; \
-	rm -f $(depfile); \
-	mv -f $(@D)/.$(@F).tmp $(@D)/.$(@F).cmd)
-
-# Usage: $(call if_changed_rule,foo)
-# will check if $(cmd_foo) changed, or any of the prequisites changed,
-# and if so will execute $(rule_foo)
-
-if_changed_rule = $(if $(strip $? $(call arg-check, $(cmd_$(1)), $(cmd_$@)) ),\
-			@set -e; \
-			$(rule_$(1)))
-
-# If quiet is set, only print short version of command
-
-cmd = @$(if $($(quiet)cmd_$(1)),echo '  $(subst ','\'',$($(quiet)cmd_$(1)))' &&) $(cmd_$(1))
-
-#	$(call descend,<dir>,<target>)
-#	Recursively call a sub-make in <dir> with target <target> 
-# Usage is deprecated, because make do not see this as an invocation of make.
-descend =$(Q)$(MAKE) -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj=$(1) $(2)
-
-# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.build obj=
-# Usage: