Merge branch 'kirkwood/dt' into next/dt2

This was part of the for-next branch earlier but for some reasons
a rebuild of the tree missed it, so I'm putting it back in now.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

74 files changed, 2034 insertions, 570 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index b0e65d6f119..e409b5d4e69 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1579,6 +1579,7 @@ config ARCH_NR_GPIO
 	int
 	default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
 	default 350 if ARCH_U8500
+	default 264 if MACH_H4700
 	default 0
 	help
 	  Maximum number of GPIOs in the system.
diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts
new file mode 100644
index 00000000000..a5376b84227
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts
@@ -0,0 +1,24 @@
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+
+/ {
+	model = "Globalscale Technologies Dreamplug";
+	compatible = "globalscale,dreamplug-003-ds2001", "globalscale,dreamplug", "mrvl,kirkwood-88f6281", "mrvl,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			clock-frequency = <200000000>;
+			status = "ok";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
new file mode 100644
index 00000000000..3474ef89094
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -0,0 +1,36 @@
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "mrvl,kirkwood";
+
+	ocp@f1000000 {
+		compatible = "simple-bus";
+		ranges = <0 0xf1000000 0x1000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		serial@12000 {
+			compatible = "ns16550a";
+			reg = <0x12000 0x100>;
+			reg-shift = <2>;
+			interrupts = <33>;
+			/* set clock-frequency in board dts */
+			status = "disabled";
+		};
+
+		serial@12100 {
+			compatible = "ns16550a";
+			reg = <0x12100 0x100>;
+			reg-shift = <2>;
+			interrupts = <34>;
+			/* set clock-frequency in board dts */
+			status = "disabled";
+		};
+
+		rtc@10300 {
+			compatible = "mrvl,kirkwood-rtc", "mrvl,orion-rtc";
+			reg = <0x10300 0x20>;
+			interrupts = <53>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra-paz00.dts b/arch/arm/boot/dts/tegra-paz00.dts
index 3c1ff5a43fb..6c02abb469d 100644
--- a/arch/arm/boot/dts/tegra-paz00.dts
+++ b/arch/arm/boot/dts/tegra-paz00.dts
@@ -42,6 +42,11 @@
 
 	i2c@7000d000 {
 		clock-frequency = <400000>;
+
+		adt7461@4c {
+			compatible = "adi,adt7461";
+			reg = <0x4c>;
+		};
 	};
 
 	i2s@70002a00 {
@@ -105,4 +110,25 @@
 	sdhci@c8000600 {
 		support-8bit;
 	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power";
+			gpios = <&gpio 79 1>; /* gpio PJ7, active low */
+			linux,code = <116>; /* KEY_POWER */
+			gpio-key,wakeup;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		wifi {
+			label = "wifi-led";
+			gpios = <&gpio 24 0>;
+			linux,default-trigger = "rfkill0";
+		};
+	};
 };
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 5d602f68a0e..1f81bfa15ff 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -183,7 +183,9 @@ config MACH_SMDKV310
 	select S5P_DEV_FIMC1
 	select S5P_DEV_FIMC2
 	select S5P_DEV_FIMC3
+	select S5P_DEV_G2D
 	select S5P_DEV_I2C_HDMIPHY
+	select S5P_DEV_JPEG
 	select S5P_DEV_MFC
 	select S5P_DEV_TV
 	select S5P_DEV_USB_EHCI
@@ -230,7 +232,9 @@ config MACH_UNIVERSAL_C210
 	select S5P_DEV_FIMC1
 	select S5P_DEV_FIMC2
 	select S5P_DEV_FIMC3
+	select S5P_DEV_G2D
 	select S5P_DEV_CSIS0
+	select S5P_DEV_JPEG
 	select S5P_DEV_FIMD0
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC2
@@ -268,11 +272,14 @@ config MACH_NURI
 	select S3C_DEV_I2C1
 	select S3C_DEV_I2C3
 	select S3C_DEV_I2C5
+	select S3C_DEV_I2C6
 	select S5P_DEV_CSIS0
+	select S5P_DEV_JPEG
 	select S5P_DEV_FIMC0
 	select S5P_DEV_FIMC1
 	select S5P_DEV_FIMC2
 	select S5P_DEV_FIMC3
+	select S5P_DEV_G2D
 	select S5P_DEV_MFC
 	select S5P_DEV_USB_EHCI
 	select S5P_SETUP_MIPIPHY
@@ -283,6 +290,7 @@ config MACH_NURI
 	select EXYNOS4_SETUP_I2C1
 	select EXYNOS4_SETUP_I2C3
 	select EXYNOS4_SETUP_I2C5
+	select EXYNOS4_SETUP_I2C6
 	select EXYNOS4_SETUP_SDHCI
 	select EXYNOS4_SETUP_USB_PHY
 	select S5P_SETUP_MIPIPHY
@@ -303,7 +311,9 @@ config MACH_ORIGEN
 	select S5P_DEV_FIMC2
 	select S5P_DEV_FIMC3
 	select S5P_DEV_FIMD0
+	select S5P_DEV_G2D
 	select S5P_DEV_I2C_HDMIPHY
+	select S5P_DEV_JPEG
 	select S5P_DEV_MFC
 	select S5P_DEV_TV
 	select S5P_DEV_USB_EHCI
diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
index 435261f83f4..32bb7b37975 100644
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@@ -28,6 +28,7 @@
 
 #include <video/platform_lcd.h>
 #include <media/m5mols.h>
+#include <media/s5k6aa.h>
 #include <media/s5p_fimc.h>
 #include <media/v4l2-mediabus.h>
 
@@ -75,6 +76,7 @@ enum fixed_regulator_id {
 	FIXED_REG_ID_MAX8903,
 	FIXED_REG_ID_CAM_A28V,
 	FIXED_REG_ID_CAM_12V,
+	FIXED_REG_ID_CAM_VT_15V,
 };
 
 static struct s3c2410_uartcfg nuri_uartcfgs[] __initdata = {
@@ -399,6 +401,9 @@ static struct regulator_consumer_supply __initdata max8997_ldo4_[] = {
 static struct regulator_consumer_supply __initdata max8997_ldo5_[] = {
 	REGULATOR_SUPPLY("vhsic", "modemctl"), /* MODEM */
 };
+static struct regulator_consumer_supply nuri_max8997_ldo6_consumer[] = {
+	REGULATOR_SUPPLY("vdd_reg", "6-003c"), /* S5K6AA camera */
+};
 static struct regulator_consumer_supply __initdata max8997_ldo7_[] = {
 	REGULATOR_SUPPLY("dig_18", "0-001f"), /* HCD803 */
 };
@@ -431,7 +436,7 @@ static struct regulator_consumer_supply __initdata max8997_buck1_[] = {
 	REGULATOR_SUPPLY("vdd_arm", NULL), /* CPUFREQ */
 };
 static struct regulator_consumer_supply __initdata max8997_buck2_[] = {
-	REGULATOR_SUPPLY("vdd_int", NULL), /* CPUFREQ */
+	REGULATOR_SUPPLY("vdd_int", "exynos4210-busfreq.0"), /* CPUFREQ */
 };
 static struct regulator_consumer_supply __initdata max8997_buck3_[] = {
 	REGULATOR_SUPPLY("vdd", "mali_dev.0"), /* G3D of Exynos 4 */
@@ -546,6 +551,8 @@ static struct regulator_init_data __initdata max8997_ldo6_data = {
 			.enabled	= 1,
 		},
 	},
+	.num_consumer_supplies	= ARRAY_SIZE(nuri_max8997_ldo6_consumer),
+	.consumer_supplies	= nuri_max8997_ldo6_consumer,
 };
 
 static struct regulator_init_data __initdata max8997_ldo7_data = {
@@ -742,7 +749,7 @@ static struct regulator_init_data __initdata max8997_buck2_data = {
 	.constraints	= {
 		.name		= "VINT_1.1V_C210",
 		.min_uV		= 900000,
-		.max_uV		= 1100000,
+		.max_uV		= 1200000,
 		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
 		.always_on	= 1,
 		.state_mem	= {
@@ -957,7 +964,6 @@ static struct max8997_platform_data __initdata nuri_max8997_pdata = {
 	.regulators		= nuri_max8997_regulators,
 
 	.buck125_gpios = { EXYNOS4_GPX0(5), EXYNOS4_GPX0(6), EXYNOS4_GPL0(0) },
-	.buck2_gpiodvs = true,
 
 	.buck1_voltage[0] = 1350000, /* 1.35V */
 	.buck1_voltage[1] = 1300000, /* 1.3V */
@@ -1116,7 +1122,30 @@ static void __init nuri_ehci_init(void)
 }
 
 /* CAMERA */
+static struct regulator_consumer_supply cam_vt_cam15_supply =
+	REGULATOR_SUPPLY("vdd_core", "6-003c");
+
+static struct regulator_init_data cam_vt_cam15_reg_init_data = {
+	.constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
+	.num_consumer_supplies = 1,
+	.consumer_supplies = &cam_vt_cam15_supply,
+};
+
+static struct fixed_voltage_config cam_vt_cam15_fixed_voltage_cfg = {
+	.supply_name	= "VT_CAM_1.5V",
+	.microvolts	= 1500000,
+	.gpio		= EXYNOS4_GPE2(2), /* VT_CAM_1.5V_EN */
+	.enable_high	= 1,
+	.init_data	= &cam_vt_cam15_reg_init_data,
+};
+
+static struct platform_device cam_vt_cam15_fixed_rdev = {
+	.name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_VT_15V,
+	.dev = { .platform_data	= &cam_vt_cam15_fixed_voltage_cfg },
+};
+
 static struct regulator_consumer_supply cam_vdda_supply[] = {
+	REGULATOR_SUPPLY("vdda", "6-003c"),
 	REGULATOR_SUPPLY("a_sensor", "0-001f"),
 };
 
@@ -1173,6 +1202,21 @@ static struct s5p_platform_mipi_csis mipi_csis_platdata = {
 
 #define GPIO_CAM_MEGA_RST	EXYNOS4_GPY3(7) /* ISP_RESET */
 #define GPIO_CAM_8M_ISP_INT	EXYNOS4_GPL2(5)
+#define GPIO_CAM_VT_NSTBY	EXYNOS4_GPL2(0)
+#define GPIO_CAM_VT_NRST	EXYNOS4_GPL2(1)
+
+static struct s5k6aa_platform_data s5k6aa_pldata = {
+	.mclk_frequency	= 24000000UL,
+	.gpio_reset	= { GPIO_CAM_VT_NRST, 0 },
+	.gpio_stby	= { GPIO_CAM_VT_NSTBY, 0 },
+	.bus_type	= V4L2_MBUS_PARALLEL,
+	.horiz_flip	= 1,
+};
+
+static struct i2c_board_info s5k6aa_board_info = {
+	I2C_BOARD_INFO("S5K6AA", 0x3c),
+	.platform_data = &s5k6aa_pldata,
+};
 
 static struct m5mols_platform_data m5mols_platdata = {
 	.gpio_reset = GPIO_CAM_MEGA_RST,
@@ -1185,6 +1229,13 @@ static struct i2c_board_info m5mols_board_info = {
 
 static struct s5p_fimc_isp_info nuri_camera_sensors[] = {
 	{
+		.flags		= V4L2_MBUS_PCLK_SAMPLE_RISING |
+				  V4L2_MBUS_VSYNC_ACTIVE_LOW,
+		.bus_type	= FIMC_ITU_601,
+		.board_info	= &s5k6aa_board_info,
+		.clk_frequency	= 24000000UL,
+		.i2c_bus_num	= 6,
+	}, {
 		.flags		= V4L2_MBUS_PCLK_SAMPLE_FALLING |
 				  V4L2_MBUS_VSYNC_ACTIVE_LOW,
 		.bus_type	= FIMC_MIPI_CSI2,
@@ -1200,11 +1251,13 @@ static struct s5p_platform_fimc fimc_md_platdata = {
 };
 
 static struct gpio nuri_camera_gpios[] = {
+	{ GPIO_CAM_VT_NSTBY,	GPIOF_OUT_INIT_LOW, "CAM_VGA_NSTBY" },
+	{ GPIO_CAM_VT_NRST,	GPIOF_OUT_INIT_LOW, "CAM_VGA_NRST"  },
 	{ GPIO_CAM_8M_ISP_INT,	GPIOF_IN,           "8M_ISP_INT"  },
 	{ GPIO_CAM_MEGA_RST,	GPIOF_OUT_INIT_LOW, "CAM_8M_NRST" },
 };
 
-static void nuri_camera_init(void)
+static void __init nuri_camera_init(void)
 {
 	s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata),
 			 &s5p_device_mipi_csis0);
@@ -1224,6 +1277,8 @@ static void nuri_camera_init(void)
 		pr_err("%s: Failed to configure 8M_ISP_INT GPIO\n", __func__);
 
 	/* Free GPIOs controlled directly by the sensor drivers. */
+	gpio_free(GPIO_CAM_VT_NRST);
+	gpio_free(GPIO_CAM_VT_NSTBY);
 	gpio_free(GPIO_CAM_MEGA_RST);
 
 	if (exynos4_fimc_setup_gpio(S5P_CAMPORT_A)) {
@@ -1234,15 +1289,27 @@ static void nuri_camera_init(void)
 	s5p_gpio_set_drvstr(EXYNOS4_GPJ1(3), S5P_GPIO_DRVSTR_LV4);
 }
 
+static struct s3c2410_platform_i2c nuri_i2c6_platdata __initdata = {
+	.frequency	= 400000U,
+	.sda_delay	= 200,
+	.bus_num	= 6,
+};
+
 static struct s3c2410_platform_i2c nuri_i2c0_platdata __initdata = {
 	.frequency	= 400000U,
 	.sda_delay	= 200,
 };
 
+/* DEVFREQ controlling memory/bus */
+static struct platform_device exynos4_bus_devfreq = {
+	.name			= "exynos4210-busfreq",
+};
+
 static struct platform_device *nuri_devices[] __initdata = {
 	/* Samsung Platform Devices */
 	&s3c_device_i2c5, /* PMIC should initialize first */
 	&s3c_device_i2c0,
+	&s3c_device_i2c6,
 	&emmc_fixed_voltage,
 	&s5p_device_mipi_csis0,
 	&s5p_device_fimc0,
@@ -1259,6 +1326,8 @@ static struct platform_device *nuri_devices[] __initdata = {
 	&s3c_device_i2c3,
 	&i2c9_gpio,
 	&s3c_device_adc,
+	&s5p_device_g2d,
+	&s5p_device_jpeg,
 	&s3c_device_rtc,
 	&s5p_device_mfc,
 	&s5p_device_mfc_l,
@@ -1274,8 +1343,10 @@ static struct platform_device *nuri_devices[] __initdata = {
 	&nuri_backlight_device,
 	&max8903_fixed_reg_dev,
 	&nuri_max8903_device,
+	&cam_vt_cam15_fixed_rdev,
 	&cam_vdda_fixed_rdev,
 	&cam_8m_12v_fixed_rdev,
+	&exynos4_bus_devfreq,
 };
 
 static void __init nuri_map_io(void)
@@ -1305,6 +1376,7 @@ static void __init nuri_machine_init(void)
 	i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
 	i2c9_devs[I2C9_MAX17042].irq = gpio_to_irq(EXYNOS4_GPX2(3));
 	i2c_register_board_info(9, i2c9_devs, ARRAY_SIZE(i2c9_devs));
+	s3c_i2c6_set_platdata(&nuri_i2c6_platdata);
 
 	s5p_fimd0_set_platdata(&nuri_fb_pdata);
 
diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c
index 0679b8ad2d1..686d1826c05 100644
--- a/arch/arm/mach-exynos/mach-origen.c
+++ b/arch/arm/mach-exynos/mach-origen.c
@@ -20,6 +20,7 @@
 #include <linux/regulator/machine.h>
 #include <linux/mfd/max8997.h>
 #include <linux/lcd.h>
+#include <linux/rfkill-gpio.h>
 
 #include <asm/mach/arch.h>
 #include <asm/hardware/gic.h>
@@ -235,6 +236,7 @@ static struct regulator_init_data __initdata max8997_ldo9_data = {
 		.min_uV		= 2800000,
 		.max_uV		= 2800000,
 		.apply_uV	= 1,
+		.always_on	= 1,
 		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
 		.state_mem	= {
 			.disabled	= 1,
@@ -278,6 +280,7 @@ static struct regulator_init_data __initdata max8997_ldo14_data = {
 		.min_uV		= 1800000,
 		.max_uV		= 1800000,
 		.apply_uV	= 1,
+		.always_on	= 1,
 		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
 		.state_mem	= {
 			.disabled	= 1,
@@ -293,6 +296,7 @@ static struct regulator_init_data __initdata max8997_ldo17_data = {
 		.min_uV		= 3300000,
 		.max_uV		= 3300000,
 		.apply_uV	= 1,
+		.always_on	= 1,
 		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
 		.state_mem	= {
 			.disabled	= 1,
@@ -602,6 +606,23 @@ static struct s3c_fb_platdata origen_lcd_pdata __initdata = {
 	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
 };
 
+/* Bluetooth rfkill gpio platform data */
+struct rfkill_gpio_platform_data origen_bt_pdata = {
+	.reset_gpio	= EXYNOS4_GPX2(2),
+	.shutdown_gpio	= -1,
+	.type		= RFKILL_TYPE_BLUETOOTH,
+	.name		= "origen-bt",
+};
+
+/* Bluetooth Platform device */
+static struct platform_device origen_device_bluetooth = {
+	.name		= "rfkill_gpio",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &origen_bt_pdata,
+	},
+};
+
 static struct platform_device *origen_devices[] __initdata = {
 	&s3c_device_hsmmc2,
 	&s3c_device_hsmmc0,
@@ -613,9 +634,12 @@ static struct platform_device *origen_devices[] __initdata = {
 	&s5p_device_fimc1,
 	&s5p_device_fimc2,
 	&s5p_device_fimc3,
+	&s5p_device_fimc_md,
 	&s5p_device_fimd0,
+	&s5p_device_g2d,
 	&s5p_device_hdmi,
 	&s5p_device_i2c_hdmiphy,
+	&s5p_device_jpeg,
 	&s5p_device_mfc,
 	&s5p_device_mfc_l,
 	&s5p_device_mfc_r,
@@ -630,6 +654,7 @@ static struct platform_device *origen_devices[] __initdata = {
 	&exynos4_device_pd[PD_MFC],
 	&origen_device_gpiokeys,
 	&origen_lcd_hv070wsa,
+	&origen_device_bluetooth,
 };
 
 /* LCD Backlight data */
@@ -643,6 +668,16 @@ static struct platform_pwm_backlight_data origen_bl_data = {
 	.pwm_period_ns	= 1000,
 };
 
+static void __init origen_bt_setup(void)
+{
+	gpio_request(EXYNOS4_GPA0(0), "GPIO BT_UART");
+	/* 4 UART Pins configuration */
+	s3c_gpio_cfgrange_nopull(EXYNOS4_GPA0(0), 4, S3C_GPIO_SFN(2));
+	/* Setup BT Reset, this gpio will be requesed by rfkill-gpio */
+	s3c_gpio_cfgpin(EXYNOS4_GPX2(2), S3C_GPIO_OUTPUT);
+	s3c_gpio_setpull(EXYNOS4_GPX2(2), S3C_GPIO_PULL_NONE);
+}
+
 static void s5p_tv_setup(void)
 {
 	/* Direct HPD to HDMI chip */
@@ -703,6 +738,8 @@ static void __init origen_machine_init(void)
 	s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
 
 	samsung_bl_set(&origen_bl_gpio_info, &origen_bl_data);
+
+	origen_bt_setup();
 }
 
 MACHINE_START(ORIGEN, "ORIGEN")
diff --git a/arch/arm/mach-ex