Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  MAINTAINERS: hwmon/coretemp: Change maintainers
  hwmon: (k8temp) Differentiate between AM2 and ASB1
  hwmon: (ads7871) Fix ads7871_probe error paths
  hwmon: (coretemp) Fix harmless build warning

4 files changed, 52 insertions, 25 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index a1df54b0af7..5fa8451ec80 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1676,8 +1676,7 @@ F:	kernel/cgroup*
 F:	mm/*cgroup*
 
 CORETEMP HARDWARE MONITORING DRIVER
-M:	Rudolf Marek <r.marek@assembler.cz>
-M:	Huaxu Wan <huaxu.wan@intel.com>
+M:	Fenghua Yu <fenghua.yu@intel.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/coretemp
diff --git a/drivers/hwmon/ads7871.c b/drivers/hwmon/ads7871.c
index b300a2048af..52319340e18 100644
--- a/drivers/hwmon/ads7871.c
+++ b/drivers/hwmon/ads7871.c
@@ -160,30 +160,12 @@ static const struct attribute_group ads7871_group = {
 
 static int __devinit ads7871_probe(struct spi_device *spi)
 {
-	int status, ret, err = 0;
+	int ret, err;
 	uint8_t val;
 	struct ads7871_data *pdata;
 
 	dev_dbg(&spi->dev, "probe\n");
 
-	pdata = kzalloc(sizeof(struct ads7871_data), GFP_KERNEL);
-	if (!pdata) {
-		err = -ENOMEM;
-		goto exit;
-	}
-
-	status = sysfs_create_group(&spi->dev.kobj, &ads7871_group);
-	if (status < 0)
-		goto error_free;
-
-	pdata->hwmon_dev = hwmon_device_register(&spi->dev);
-	if (IS_ERR(pdata->hwmon_dev)) {
-		err = PTR_ERR(pdata->hwmon_dev);
-		goto error_remove;
-	}
-
-	spi_set_drvdata(spi, pdata);
-
 	/* Configure the SPI bus */
 	spi->mode = (SPI_MODE_0);
 	spi->bits_per_word = 8;
@@ -201,6 +183,24 @@ static int __devinit ads7871_probe(struct spi_device *spi)
 	we need to make sure we really have a chip*/
 	if (val != ret) {
 		err = -ENODEV;
+		goto exit;
+	}
+
+	pdata = kzalloc(sizeof(struct ads7871_data), GFP_KERNEL);
+	if (!pdata) {
+		err = -ENOMEM;
+		goto exit;
+	}
+
+	err = sysfs_create_group(&spi->dev.kobj, &ads7871_group);
+	if (err < 0)
+		goto error_free;
+
+	spi_set_drvdata(spi, pdata);
+
+	pdata->hwmon_dev = hwmon_device_register(&spi->dev);
+	if (IS_ERR(pdata->hwmon_dev)) {
+		err = PTR_ERR(pdata->hwmon_dev);
 		goto error_remove;
 	}
 
diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c
index c070c9714cb..de8111114f4 100644
--- a/drivers/hwmon/coretemp.c
+++ b/drivers/hwmon/coretemp.c
@@ -518,7 +518,6 @@ static struct notifier_block coretemp_cpu_notifier __refdata = {
 static int __init coretemp_init(void)
 {
 	int i, err = -ENODEV;
-	struct pdev_entry *p, *n;
 
 	/* quick check if we run Intel */
 	if (cpu_data(0).x86_vendor != X86_VENDOR_INTEL)
diff --git a/drivers/hwmon/k8temp.c b/drivers/hwmon/k8temp.c
index b9bb3e0ca53..39ead2a4d3c 100644
--- a/drivers/hwmon/k8temp.c
+++ b/drivers/hwmon/k8temp.c
@@ -143,6 +143,37 @@ static const struct pci_device_id k8temp_ids[] = {
 
 MODULE_DEVICE_TABLE(pci, k8temp_ids);
 
+static int __devinit is_rev_g_desktop(u8 model)
+{
+	u32 brandidx;
+
+	if (model < 0x69)
+		return 0;
+
+	if (model == 0xc1 || model == 0x6c || model == 0x7c)
+		return 0;
+
+	/*
+	 * Differentiate between AM2 and ASB1.
+	 * See "Constructing the processor Name String" in "Revision
+	 * Guide for AMD NPT Family 0Fh Processors" (33610).
+	 */
+	brandidx = cpuid_ebx(0x80000001);
+	brandidx = (brandidx >> 9) & 0x1f;
+
+	/* Single core */
+	if ((model == 0x6f || model == 0x7f) &&
+	    (brandidx == 0x7 || brandidx == 0x9 || brandidx == 0xc))
+		return 0;
+
+	/* Dual core */
+	if (model == 0x6b &&
+	    (brandidx == 0xb || brandidx == 0xc))
+		return 0;
+
+	return 1;
+}
+
 static int __devinit k8temp_probe(struct pci_dev *pdev,
 				  const struct pci_device_id *id)
 {
@@ -179,9 +210,7 @@ static int __devinit k8temp_probe(struct pci_dev *pdev,
 				 "wrong - check erratum #141\n");
 		}
 
-		if ((model >= 0x69) &&
-		    !(model == 0xc1 || model == 0x6c || model == 0x7c ||
-		      model == 0x6b || model == 0x6f || model == 0x7f)) {
+		if (is_rev_g_desktop(model)) {
 			/*
 			 * RevG desktop CPUs (i.e. no socket S1G1 or
 			 * ASB1 parts) need additional offset,