Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux

Resolved conflicts:
  fs/xfs/xfs_trans_priv.h:
    - deleted struct xfs_ail field xa_flags
    - kept field xa_log_flush in struct xfs_ail
  fs/xfs/xfs_trans_ail.c:
    - in xfsaild_push(), in XFS_ITEM_PUSHBUF case, replaced
      "flush_log = 1" with "ailp->xa_log_flush++"

Signed-off-by: Alex Elder <aelder@sgi.com>

101 files changed, 467 insertions, 334 deletions

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 854ed5ca7e3..d6e6724446c 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -2706,10 +2706,11 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			functions are at fixed addresses, they make nice
 			targets for exploits that can control RIP.
 
-			emulate     [default] Vsyscalls turn into traps and are
-			            emulated reasonably safely.
+			emulate     Vsyscalls turn into traps and are emulated
+			            reasonably safely.
 
-			native      Vsyscalls are native syscall instructions.
+			native      [default] Vsyscalls are native syscall
+			            instructions.
 			            This is a little bit faster than trapping
 			            and makes a few dynamic recompilers work
 			            better than they would in emulation mode.
diff --git a/Documentation/networking/scaling.txt b/Documentation/networking/scaling.txt
index 8ce7c30e723..fe67b5c79f0 100644
--- a/Documentation/networking/scaling.txt
+++ b/Documentation/networking/scaling.txt
@@ -27,7 +27,7 @@ applying a filter to each packet that assigns it to one of a small number
 of logical flows. Packets for each flow are steered to a separate receive
 queue, which in turn can be processed by separate CPUs. This mechanism is
 generally known as “Receive-side Scaling” (RSS). The goal of RSS and
-the other scaling techniques to increase performance uniformly.
+the other scaling techniques is to increase performance uniformly.
 Multi-queue distribution can also be used for traffic prioritization, but
 that is not the focus of these techniques.
 
@@ -186,10 +186,10 @@ are steered using plain RPS. Multiple table entries may point to the
 same CPU. Indeed, with many flows and few CPUs, it is very likely that
 a single application thread handles flows with many different flow hashes.
 
-rps_sock_table is a global flow table that contains the *desired* CPU for
-flows: the CPU that is currently processing the flow in userspace. Each
-table value is a CPU index that is updated during calls to recvmsg and
-sendmsg (specifically, inet_recvmsg(), inet_sendmsg(), inet_sendpage()
+rps_sock_flow_table is a global flow table that contains the *desired* CPU
+for flows: the CPU that is currently processing the flow in userspace.
+Each table value is a CPU index that is updated during calls to recvmsg
+and sendmsg (specifically, inet_recvmsg(), inet_sendmsg(), inet_sendpage()
 and tcp_splice_read()).
 
 When the scheduler moves a thread to a new CPU while it has outstanding
diff --git a/MAINTAINERS b/MAINTAINERS
index ace8f9c81b9..5483e0c93b4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6366,10 +6366,10 @@ F:	net/ipv4/tcp_lp.c
 
 TEGRA SUPPORT
 M:	Colin Cross <ccross@android.com>
-M:	Erik Gilling <konkers@android.com>
 M:	Olof Johansson <olof@lixom.net>
+M:	Stephen Warren <swarren@nvidia.com>
 L:	linux-tegra@vger.kernel.org
-T:	git git://android.git.kernel.org/kernel/tegra.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/olof/tegra.git
 S:	Supported
 F:	arch/arm/mach-tegra
 
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index 7aa4262ada7..197f81c7735 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -259,7 +259,6 @@ static void __init vic_disable(void __iomem *base)
 	writel(0, base + VIC_INT_SELECT);
 	writel(0, base + VIC_INT_ENABLE);
 	writel(~0, base + VIC_INT_ENABLE_CLEAR);
-	writel(0, base + VIC_IRQ_STATUS);
 	writel(0, base + VIC_ITCR);
 	writel(~0, base + VIC_INT_SOFT_CLEAR);
 }
diff --git a/arch/arm/include/asm/localtimer.h b/arch/arm/include/asm/localtimer.h
index 080d74f8128..ff66638ff54 100644
--- a/arch/arm/include/asm/localtimer.h
+++ b/arch/arm/include/asm/localtimer.h
@@ -10,6 +10,8 @@
 #ifndef __ASM_ARM_LOCALTIMER_H
 #define __ASM_ARM_LOCALTIMER_H
 
+#include <linux/errno.h>
+
 struct clock_event_device;
 
 /*
diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c
index 4c851834f68..6be3e2e4d83 100644
--- a/arch/arm/kernel/perf_event_v7.c
+++ b/arch/arm/kernel/perf_event_v7.c
@@ -321,8 +321,8 @@ static const unsigned armv7_a9_perf_map[PERF_COUNT_HW_MAX] = {
 	[PERF_COUNT_HW_CPU_CYCLES]	    = ARMV7_PERFCTR_CPU_CYCLES,
 	[PERF_COUNT_HW_INSTRUCTIONS]	    =
 					ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE,
-	[PERF_COUNT_HW_CACHE_REFERENCES]    = ARMV7_PERFCTR_COHERENT_LINE_HIT,
-	[PERF_COUNT_HW_CACHE_MISSES]	    = ARMV7_PERFCTR_COHERENT_LINE_MISS,
+	[PERF_COUNT_HW_CACHE_REFERENCES]    = ARMV7_PERFCTR_DCACHE_ACCESS,
+	[PERF_COUNT_HW_CACHE_MISSES]	    = ARMV7_PERFCTR_DCACHE_REFILL,
 	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
 	[PERF_COUNT_HW_BRANCH_MISSES]	    = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
 	[PERF_COUNT_HW_BUS_CYCLES]	    = ARMV7_PERFCTR_CLOCK_CYCLES,
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 2028464cf5b..f79b7d2a8ed 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -193,7 +193,8 @@ static int __init omap2430_i2c_init(void)
 {
 	omap_register_i2c_bus(1, 100, sdp2430_i2c1_boardinfo,
 			ARRAY_SIZE(sdp2430_i2c1_boardinfo));
-	omap2_pmic_init("twl4030", &sdp2430_twldata);
+	omap_pmic_init(2, 100, "twl4030", INT_24XX_SYS_NIRQ,
+			&sdp2430_twldata);
 	return 0;
 }
 
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index a9b45c76e1d..097a42d81e5 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -137,8 +137,7 @@ static void omap4_hsmmc1_before_set_reg(struct device *dev, int slot,
 	 */
 	reg = omap4_ctrl_pad_readl(control_pbias_offset);
 	reg &= ~(OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK |
-		OMAP4_MMC1_PWRDNZ_MASK |
-		OMAP4_USBC1_ICUSB_PWRDNZ_MASK);
+		OMAP4_MMC1_PWRDNZ_MASK);
 	omap4_ctrl_pad_writel(reg, control_pbias_offset);
 }
 
@@ -156,8 +155,7 @@ static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot,
 		else
 			reg |= OMAP4_MMC1_PBIASLITE_VMODE_MASK;
 		reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK |
-			OMAP4_MMC1_PWRDNZ_MASK |
-			OMAP4_USBC1_ICUSB_PWRDNZ_MASK);
+			OMAP4_MMC1_PWRDNZ_MASK);
 		omap4_ctrl_pad_writel(reg, control_pbias_offset);
 
 		timeout = jiffies + msecs_to_jiffies(5);
@@ -171,16 +169,14 @@ static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot,
 		if (reg & OMAP4_MMC1_PBIASLITE_VMODE_ERROR_MASK) {
 			pr_err("Pbias Voltage is not same as LDO\n");
 			/* Caution : On VMODE_ERROR Power Down MMC IO */
-			reg &= ~(OMAP4_MMC1_PWRDNZ_MASK |
-				OMAP4_USBC1_ICUSB_PWRDNZ_MASK);
+			reg &= ~(OMAP4_MMC1_PWRDNZ_MASK);
 			omap4_ctrl_pad_writel(reg, control_pbias_offset);
 		}
 	} else {
 		reg = omap4_ctrl_pad_readl(control_pbias_offset);
 		reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK |
 			OMAP4_MMC1_PWRDNZ_MASK |
-			OMAP4_MMC1_PBIASLITE_VMODE_MASK |
-			OMAP4_USBC1_ICUSB_PWRDNZ_MASK);
+			OMAP4_MMC1_PBIASLITE_VMODE_MASK);
 		omap4_ctrl_pad_writel(reg, control_pbias_offset);
 	}
 }
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index a65145b02a5..19e4dac62a8 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -137,9 +137,6 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data)
 	musb_plat.mode = board_data->mode;
 	musb_plat.extvbus = board_data->extvbus;
 
-	if (cpu_is_omap44xx())
-		omap4430_phy_init(dev);
-
 	if (cpu_is_omap3517() || cpu_is_omap3505()) {
 		oh_name = "am35x_otg_hs";
 		name = "musb-am35x";
diff --git a/arch/arm/mach-tegra/cpu-tegra.c b/arch/arm/mach-tegra/cpu-tegra.c
index 0e1016a827a..0e0fd4d889b 100644
--- a/arch/arm/mach-tegra/cpu-tegra.c
+++ b/arch/arm/mach-tegra/cpu-tegra.c
@@ -32,7 +32,6 @@
 
 #include <asm/system.h>
 
-#include <mach/hardware.h>
 #include <mach/clk.h>
 
 /* Frequency table index must be sequential starting at 0 */
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 4210cb434db..a3e0c8692f0 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -6,6 +6,7 @@ config UX500_SOC_COMMON
 	select ARM_GIC
 	select HAS_MTU
 	select ARM_ERRATA_753970
+	select ARM_ERRATA_754322
 
 menu "Ux500 SoC"
 
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index cc7e2d8be9a..f8037ba338a 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -496,6 +496,13 @@ static void __init free_unused_memmap(struct meminfo *mi)
 		 */
 		bank_start = min(bank_start,
 				 ALIGN(prev_bank_end, PAGES_PER_SECTION));
+#else
+		/*
+		 * Align down here since the VM subsystem insists that the
+		 * memmap entries are valid from the bank start aligned to
+		 * MAX_ORDER_NR_PAGES.
+		 */
+		bank_start = round_down(bank_start, MAX_ORDER_NR_PAGES);
 #endif
 		/*
 		 * If we had a previous bank, and there is a space
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 177cdaf8356..b122adc8bdb 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -24,6 +24,7 @@ config MIPS
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
 	select HAVE_ARCH_JUMP_LABEL
+	select IRQ_FORCED_THREADING
 
 menu "Machine selection"
 
@@ -722,6 +723,7 @@ config CAVIUM_OCTEON_SIMULATOR
 	select SYS_SUPPOR