diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2012-03-28 20:59:45 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2012-03-28 20:59:45 -0700 |
commit | b5174fa3a7f4f8f150bfa3b917c92608953dfa0f (patch) | |
tree | 5efd32dd52fe55f760094e78f18acd3ff869751d | |
parent | afb9bd704c7116076879352a2cc2c43aa12c1e14 (diff) | |
parent | 135111cc5595c6a24dd826d503e2d2bae92da1c4 (diff) |
Merge tag 'mmc-merge-for-3.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc
Pull MMC updates from Chris Ball:
Core:
* Support for MMC 4.5 Data Tag feature -- we tag REQ_META, so devices
that support Data Tag will provide increased throughput for metadata.
* Faster detection of card removal on I/O errors.
Drivers:
* dw_mmc now supports eMMC Power Off Notify, has PCI support, and
implements pre_req and post_req for asynchronous requests.
* omap_hsmmc now supports device tree.
* esdhc now has power management support.
* sdhci-tegra now supports Tegra30 devices.
* sdhci-spear now supports hibernation.
* tmio_mmc now supports using a GPIO for card detection.
* Intel PCH now supports 8-bit bus transfers.
* tag 'mmc-merge-for-3.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (53 commits)
mmc: sh_mmcif: simplify bitmask macros
mmc: sh_mobile_sdhi: support modular mmc-core with non-standard hotplug
mmc: sh_mobile_sdhi: add a callback for board specific init code
mmc: tmio: cosmetic: prettify the tmio_mmc_set_ios() function
mmc: sh_mobile_sdhi: do not manage PM clocks manually
mmc: tmio_mmc: remove unused sdio_irq_enabled flag
mmc: tmio_mmc: power status flag doesn't have to be exposed in platform data
mmc: sh_mobile_sdhi: pass card hotplug GPIO number to TMIO MMC
mmc: tmio_mmc: support the generic MMC GPIO card hotplug helper
mmc: tmio: calculate the native hotplug condition only once
mmc: simplify mmc_cd_gpio_request() by removing two parameters
mmc: sdhci-pci: allow 8-bit bus width for Intel PCH
mmc: sdhci: check interrupt flags in ISR again
mmc: sdhci-pci: Add MSI support
mmc: core: warn when card doesn't support HPI
mmc: davinci: Poll status for small size transfers
mmc: davinci: Eliminate spurious interrupts
mmc: omap_hsmmc: Avoid a regulator voltage change with dt
mmc: omap_hsmmc: Convert hsmmc driver to use device tree
mmc: sdhci-pci: add SDHCI_QUIRK2_HOST_OFF_CARD_ON for Medfield SDIO
...
42 files changed, 1161 insertions, 722 deletions
diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt new file mode 100644 index 00000000000..dbd4368ab8c --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt @@ -0,0 +1,33 @@ +* TI Highspeed MMC host controller for OMAP + +The Highspeed MMC Host Controller on TI OMAP family +provides an interface for MMC, SD, and SDIO types of memory cards. + +Required properties: +- compatible: + Should be "ti,omap2-hsmmc", for OMAP2 controllers + Should be "ti,omap3-hsmmc", for OMAP3 controllers + Should be "ti,omap4-hsmmc", for OMAP4 controllers +- ti,hwmods: Must be "mmc<n>", n is controller instance starting 1 +- reg : should contain hsmmc registers location and length + +Optional properties: +ti,dual-volt: boolean, supports dual voltage cards +<supply-name>-supply: phandle to the regulator device tree node +"supply-name" examples are "vmmc", "vmmc_aux" etc +ti,bus-width: Number of data lines, default assumed is 1 if the property is missing. +cd-gpios: GPIOs for card detection +wp-gpios: GPIOs for write protection +ti,non-removable: non-removable slot (like eMMC) +ti,needs-special-reset: Requires a special softreset sequence + +Example: + mmc1: mmc@0x4809c000 { + compatible = "ti,omap4-hsmmc"; + reg = <0x4809c000 0x400>; + ti,hwmods = "mmc1"; + ti,dual-volt; + ti,bus-width = <4>; + vmmc-supply = <&vmmc>; /* phandle to regulator node */ + ti,non-removable; + }; diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c index 82ea6fccfb3..b3982c867c9 100644 --- a/arch/arm/mach-exynos/mach-nuri.c +++ b/arch/arm/mach-exynos/mach-nuri.c @@ -111,7 +111,7 @@ static struct s3c_sdhci_platdata nuri_hsmmc0_data __initdata = { .max_width = 8, .host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | - MMC_CAP_DISABLE | MMC_CAP_ERASE), + MMC_CAP_ERASE), .cd_type = S3C_SDHCI_CD_PERMANENT, .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, }; @@ -150,8 +150,7 @@ static struct platform_device emmc_fixed_voltage = { static struct s3c_sdhci_platdata nuri_hsmmc2_data __initdata = { .max_width = 4, .host_caps = MMC_CAP_4_BIT_DATA | - MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | - MMC_CAP_DISABLE, + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, .ext_cd_gpio = EXYNOS4_GPX3(3), /* XEINT_27 */ .ext_cd_gpio_invert = 1, .cd_type = S3C_SDHCI_CD_GPIO, diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index 28658da9f42..6bb9dbdd73f 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -745,8 +745,7 @@ static struct platform_device universal_gpio_keys = { static struct s3c_sdhci_platdata universal_hsmmc0_data __initdata = { .max_width = 8, .host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA | - MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | - MMC_CAP_DISABLE), + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), .cd_type = S3C_SDHCI_CD_PERMANENT, .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, }; @@ -784,8 +783,7 @@ static struct platform_device mmc0_fixed_voltage = { static struct s3c_sdhci_platdata universal_hsmmc2_data __initdata = { .max_width = 4, .host_caps = MMC_CAP_4_BIT_DATA | - MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | - MMC_CAP_DISABLE, + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, .ext_cd_gpio = EXYNOS4_GPX3(4), /* XEINT_28 */ .ext_cd_gpio_invert = 1, .cd_type = S3C_SDHCI_CD_GPIO, @@ -796,8 +794,7 @@ static struct s3c_sdhci_platdata universal_hsmmc2_data __initdata = { static struct s3c_sdhci_platdata universal_hsmmc3_data __initdata = { .max_width = 4, .host_caps = MMC_CAP_4_BIT_DATA | - MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | - MMC_CAP_DISABLE, + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, .cd_type = S3C_SDHCI_CD_EXTERNAL, }; diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index 8121720e942..100db6217f3 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -316,6 +316,7 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, mmc->slots[0].pm_caps = c->pm_caps; mmc->slots[0].internal_clock = !c->ext_clock; mmc->dma_mask = 0xffffffff; + mmc->max_freq = c->max_freq; if (cpu_is_omap44xx()) mmc->reg_offset = OMAP4_MMC_REG_OFFSET; else diff --git a/arch/arm/mach-omap2/hsmmc.h b/arch/arm/mach-omap2/hsmmc.h index 07831cc3c17..7f2e790e092 100644 --- a/arch/arm/mach-omap2/hsmmc.h +++ b/arch/arm/mach-omap2/hsmmc.h @@ -27,6 +27,8 @@ struct omap2_hsmmc_info { char *name; /* or NULL for default */ struct platform_device *pdev; /* mmc controller instance */ int ocr_mask; /* temporary HACK */ + int max_freq; /* maximum clock, if constrained by external + * circuitry, or 0 for default */ /* Remux (pad configuration) when powering on/off */ void (*remux)(struct device *dev, int slot, int power_on); /* init some special card */ diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h index f75946c3293..7a38750c007 100644 --- a/arch/arm/plat-omap/include/plat/mmc.h +++ b/arch/arm/plat-omap/include/plat/mmc.h @@ -137,8 +137,6 @@ struct omap_mmc_platform_data { int (*set_power)(struct device *dev, int slot, int power_on, int vdd); int (*get_ro)(struct device *dev, int slot); - int (*set_sleep)(struct device *dev, int slot, int sleep, - int vdd, int cardsleep); void (*remux)(struct device *dev, int slot, int power_on); /* Call back before enabling / disabling regulators */ void (*before_set_reg)(struct device *dev, int slot, diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index 4c3b2847e47..eed213a5c8c 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -1079,6 +1079,7 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq, struct mmc_blk_request *brq = &mqrq->brq; struct request *req = mqrq->req; struct mmc_blk_data *md = mq->data; + bool do_data_tag; /* * Reliable writes are used to implement Forced Unit Access and @@ -1155,6 +1156,16 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq, mmc_apply_rel_rw(brq, card, req); /* + * Data tag is used only during writing meta data to speed + * up write and any subsequent read of this meta data + */ + do_data_tag = (card->ext_csd.data_tag_unit_size) && + (req->cmd_flags & REQ_META) && + (rq_data_dir(req) == WRITE) && + ((brq->data.blocks * brq->data.blksz) >= + card->ext_csd.data_tag_unit_size); + + /* * Pre-defined multi-block transfers are preferable to * open ended-ones (and necessary for reliable writes). * However, it is not sufficient to just send CMD23, @@ -1172,13 +1183,13 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq, * We'll avoid using CMD23-bounded multiblock writes for * these, while retaining features like reliable writes. */ - - if ((md->flags & MMC_BLK_CMD23) && - mmc_op_multi(brq->cmd.opcode) && - (do_rel_wr || !(card->quirks & MMC_QUIRK_BLK_NO_CMD23))) { + if ((md->flags & MMC_BLK_CMD23) && mmc_op_multi(brq->cmd.opcode) && + (do_rel_wr || !(card->quirks & MMC_QUIRK_BLK_NO_CMD23) || + do_data_tag)) { brq->sbc.opcode = MMC_SET_BLOCK_COUNT; brq->sbc.arg = brq->data.blocks | - (do_rel_wr ? (1 << 31) : 0); + (do_rel_wr ? (1 << 31) : 0) | + (do_data_tag ? (1 << 29) : 0); brq->sbc.flags = MMC_RSP_R1 | MMC_CMD_AC; brq->mrq.sbc = &brq->sbc; } diff --git a/drivers/mmc/core/cd-gpio.c b/drivers/mmc/core/cd-gpio.c index 082202ae4a0..29de31e260d 100644 --- a/drivers/mmc/core/cd-gpio.c +++ b/drivers/mmc/core/cd-gpio.c @@ -28,13 +28,17 @@ static irqreturn_t mmc_cd_gpio_irqt(int irq, void *dev_id) return IRQ_HANDLED; } -int mmc_cd_gpio_request(struct mmc_host *host, unsigned int gpio, - unsigned int irq, unsigned long flags) +int mmc_cd_gpio_request(struct mmc_host *host, unsigned int gpio) { size_t len = strlen(dev_name(host->parent)) + 4; - struct mmc_cd_gpio *cd = kmalloc(sizeof(*cd) + len, GFP_KERNEL); + struct mmc_cd_gpio *cd; + int irq = gpio_to_irq(gpio); int ret; + if (irq < 0) + return irq; + + cd = kmalloc(sizeof(*cd) + len, GFP_KERNEL); if (!cd) return -ENOMEM; @@ -45,7 +49,8 @@ int mmc_cd_gpio_request(struct mmc_host *host, unsigned int gpio, goto egpioreq; ret = request_threaded_irq(irq, NULL, mmc_cd_gpio_irqt, - flags, cd->label, host); + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + cd->label, host); if (ret < 0) goto eirqreq; diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 132378b89d7..14f262e9246 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -188,6 +188,12 @@ mmc_start_request(struct mmc_host *host, struct mmc_request *mrq) struct scatterlist *sg; #endif + if (mrq->sbc) { + pr_debug("<%s: starting CMD%u arg %08x flags %08x>\n", + mmc_hostname(host), mrq->sbc->opcode, + mrq->sbc->arg, mrq->sbc->flags); + } + pr_debug("%s: starting CMD%u arg %08x flags %08x\n", mmc_hostname(host), mrq->cmd->opcode, mrq->cmd->arg, mrq->cmd->flags); @@ -243,16 +249,17 @@ static void mmc_wait_done(struct mmc_request *mrq) complete(&mrq->completion); } -static void __mmc_start_req(struct mmc_host *host, struct mmc_request *mrq) +static int __mmc_start_req(struct mmc_host *host, struct mmc_request *mrq) { init_completion(&mrq->completion); mrq->done = mmc_wait_done; if (mmc_card_removed(host->card)) { mrq->cmd->error = -ENOMEDIUM; complete(&mrq->completion); - return; + return -ENOMEDIUM; } mmc_start_request(host, mrq); + return 0; } static void mmc_wait_for_req_done(struct mmc_host *host, @@ -336,6 +343,7 @@ struct mmc_async_req *mmc_start_req(struct mmc_host *host, struct mmc_async_req *areq, int *error) { int err = 0; + int start_err = 0; struct mmc_async_req *data = host->areq; /* Prepare a new request */ @@ -345,30 +353,23 @@ struct mmc_async_req *mmc_start_req(struct mmc_host *host, if (host->areq) { mmc_wait_for_req_done(host, host->areq->mrq); err = host->areq->err_check(host->card, host->areq); - if (err) { - /* post process the completed failed request */ - mmc_post_req(host, host->areq->mrq, 0); - if (areq) - /* - * Cancel the new prepared request, because - * it can't run until the failed - * request has been properly handled. - */ - mmc_post_req(host, areq->mrq, -EINVAL); - - host->areq = NULL; - goto out; - } } - if (areq) - __mmc_start_req(host, areq->mrq); + if (!err && areq) + start_err = __mmc_start_req(host, areq->mrq); if (host->areq) mmc_post_req(host, host->areq->mrq, 0); - host->areq = areq; - out: + /* Cancel a prepared request if it was not started. */ + if ((err || start_err) && areq) + mmc_post_req(host, areq->mrq, -EINVAL); + + if (err) + host->areq = NULL; + else + host->areq = areq; + if (error) *error = err; return data; @@ -599,105 +600,6 @@ unsigned int mmc_align_data_size(struct mmc_card *card, unsigned int sz) EXPORT_SYMBOL(mmc_align_data_size); /** - * mmc_host_enable - enable a host. - * @host: mmc host to enable - * - * Hosts that support power saving can use the 'enable' and 'disable' - * methods to exit and enter power saving states. For more information - * see comments for struct mmc_host_ops. - */ -int mmc_host_enable(struct mmc_host *host) -{ - if (!(host->caps & MMC_CAP_DISABLE)) - return 0; - - if (host->en_dis_recurs) - return 0; - - if (host->nesting_cnt++) - return 0; - - cancel_delayed_work_sync(&host->disable); - - if (host->enabled) - return 0; - - if (host->ops->enable) { - int err; - - host->en_dis_recurs = 1; - mmc_host_clk_hold(host); - err = host->ops->enable(host); - mmc_host_clk_release(host); - host->en_dis_recurs = 0; - - if (err) { - pr_debug("%s: enable error %d\n", - mmc_hostname(host), err); - return err; - } - } - host->enabled = 1; - return 0; -} -EXPORT_SYMBOL(mmc_host_enable); - -static int mmc_host_do_disable(struct mmc_host *host, int lazy) -{ - if (host->ops->disable) { - int err; - - host->en_dis_recurs = 1; - mmc_host_clk_hold(host); - err = host->ops->disable(host, lazy); - mmc_host_clk_release(host); - host->en_dis_recurs = 0; - - if (err < 0) { - pr_debug("%s: disable error %d\n", - mmc_hostname(host), err); - return err; - } - if (err > 0) { - unsigned long delay = msecs_to_jiffies(err); - - mmc_schedule_delayed_work(&host->disable, delay); - } - } - host->enabled = 0; - return 0; -} - -/** - * mmc_host_disable - disable a host. - * @host: mmc host to disable - * - * Hosts that support power saving can use the 'enable' and 'disable' - * methods to exit and enter power saving states. For more information - * see comments for struct mmc_host_ops. - */ -int mmc_host_disable(struct mmc_host *host) -{ - int err; - - if (!(host->caps & MMC_CAP_DISABLE)) - return 0; - - if (host->en_dis_recurs) - return 0; - - if (--host->nesting_cnt) - return 0; - - if (!host->enabled) - return 0; - - err = mmc_host_do_disable(host, 0); - return err; -} -EXPORT_SYMBOL(mmc_host_disable); - -/** * __mmc_claim_host - exclusively claim a host * @host: mmc host to claim * @abort: whether or not the operation should be aborted @@ -735,8 +637,8 @@ int __mmc_claim_host(struct mmc_host *host, atomic_t *abort) wake_up(&host->wq); spin_unlock_irqrestore(&host->lock, flags); remove_wait_queue(&host->wq, &wait); - if (!stop) - mmc_host_enable(host); + if (host->ops->enable && !stop && host->claim_cnt == 1) + host->ops->enable(host); return stop; } @@ -761,21 +663,28 @@ int mmc_try_claim_host(struct mmc_host *host) claimed_host = 1; } spin_unlock_irqrestore(&host->lock, flags); + if (host->ops->enable && claimed_host && host->claim_cnt == 1) + host->ops->enable(host); return claimed_host; } EXPORT_SYMBOL(mmc_try_claim_host); /** - * mmc_do_release_host - release a claimed host + * mmc_release_host - release a host * @host: mmc host to release * - * If you successfully claimed a host, this function will - * release it again. + * Release a MMC host, allowing others to claim the host + * for their operations. */ -void mmc_do_release_host(struct mmc_host *host) +void mmc_release_host(struct mmc_host *host) { unsigned long flags; + WARN_ON(!host->claimed); + + if (host->ops->disable && host->claim_cnt == 1) + host->ops->disable(host); + spin_lock_irqsave(&host->lock, flags); if (--host->claim_cnt) { /* Release for nested claim */ @@ -787,67 +696,6 @@ void mmc_do_release_host(struct mmc_host *host) wake_up(&host->wq); } } -EXPORT_SYMBOL(mmc_do_release_host); - -void mmc_host_deeper_disable(struct work_struct *work) -{ - struct mmc_host *host = - container_of(work, struct mmc_host, disable.work); - - /* If the host is claimed then we do not want to disable it anymore */ - if (!mmc_try_claim_host(host)) - return; - mmc_host_do_disable(host, 1); - mmc_do_release_host(host); -} - -/** - * mmc_host_lazy_disable - lazily disable a host. - * @host: mmc host to disable - * - * Hosts that support power saving can use the 'enable' and 'disable' - * methods to exit and enter power saving states. For more information - * see comments for struct mmc_host_ops. - */ -int mmc_host_lazy_disable(struct mmc_host *host) -{ - if (!(host->caps & MMC_CAP_DISABLE)) - return 0; - - if (host->en_dis_recurs) - return 0; - - if (--host->nesting_cnt) - return 0; - - if (!host->enabled) - return 0; - - if (host->disable_delay) { - mmc_schedule_delayed_work(&host->disable, - msecs_to_jiffies(host->disable_delay)); - return 0; - } else - return mmc_host_do_disable(host, 1); -} -EXPORT_SYMBOL(mmc_host_lazy_disable); - -/** - * mmc_release_host - release a host - * @host: mmc host to release - * - * Release a MMC host, allowing others to claim the host - * for their operations. - */ -void mmc_release_host(struct mmc_host *host) -{ - WARN_ON(!host->claimed); - - mmc_host_lazy_disable(host); - - mmc_do_release_host(host); -} - EXPORT_SYMBOL(mmc_release_host); /* @@ -2115,18 +1963,36 @@ int _mmc_detect_card_removed(struct mmc_host *host) int mmc_detect_card_removed(struct mmc_host *host) { struct mmc_card *card = host->card; + int ret; WARN_ON(!host->claimed); + + if (!card) + return 1; + + ret = mmc_card_removed(card); /* * The card will be considered unchanged unless we have been asked to * detect a change or host requires polling to provide card detection. */ - if (card && !host->detect_change && !(host->caps & MMC_CAP_NEEDS_POLL)) - return mmc_card_removed(card); + if (!host->detect_change && !(host->caps & MMC_CAP_NEEDS_POLL) && + !(host->caps2 & MMC_CAP2_DETECT_ON_ERR)) + return ret; host->detect_change = 0; + if (!ret) { + ret = _mmc_detect_card_removed(host); + if (ret && (host->caps2 & MMC_CAP2_DETECT_ON_ERR)) { + /* + * Schedule a detect work as soon as possible to let a + * rescan handle the card removal. + */ + cancel_delayed_work(&host->detect); + mmc_detect_change(host, 0); + } + } - return _mmc_detect_card_removed(host); + return ret; } EXPORT_SYMBOL(mmc_detect_card_removed); @@ -2203,8 +2069,6 @@ void mmc_stop_host(struct mmc_host *host) spin_unlock_irqrestore(&host->lock, flags); #endif - if (host->caps & MMC_CAP_DISABLE) - cancel_delayed_work(&host->disable); cancel_delayed_work_sync(&host->detect); mmc_flush_scheduled_work(); @@ -2399,13 +2263,11 @@ int mmc_suspend_host(struct mmc_host *host) { int err = 0; - if (host->caps & MMC_CAP_DISABLE) - cancel_delayed_work(&host->disable); cancel_delayed_work(&host->detect); mmc_flush_scheduled_work(); if (mmc_try_claim_host(host)) { err = mmc_cache_ctrl(host, 0); - mmc_do_release_host(host); + mmc_release_host(host); } else { err = -EBUSY; } @@ -2426,7 +2288,7 @@ int mmc_suspend_host(struct mmc_host *host) if (host->bus_ops->suspend) { err = host->bus_ops->suspend(host); } - mmc_do_release_host(host); + mmc_release_host(host); if (err == -ENOSYS || !host->bus_ops->resume) { /* diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index c3704e293a7..91c84c7a182 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -330,7 +330,6 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *dev) spin_lock_init(&host->lock); init_waitqueue_head(&host->wq); INIT_DELAYED_WORK(&host->detect, mmc_rescan); - INIT_DELAYED_WORK_DEFERRABLE(&host->disable, mmc_host_deeper_disable); #ifdef CONFIG_PM host->pm_notify.notifier_call = mmc_pm_notify; #endif diff --git a/drivers/mmc/core/host.h b/drivers/mmc/core/host.h index 08a7852ade4..f2ab9e57812 100644 --- a/drivers/mmc/core/host.h +++ b/drivers/mmc/core/host.h @@ -14,7 +14,6 @@ int mmc_register_host_class(void); void mmc_unregister_host_class(void); -void mmc_host_deeper_disable(struct work_struct *work); #endif diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 2b9ed1401dc..02914d609a9 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -519,6 +519,20 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) ext_csd[EXT_CSD_CACHE_SIZE + 1] << 8 | ext_csd[EXT_CSD_CACHE_SIZE + 2] << 16 | ext_csd[EXT_CSD_CACHE_SIZE + 3] << 24; + + if (ext_csd[EXT_CSD_DATA_SECTOR_SIZE] == 1) + card->ext_csd.data_sector_size = 4096; + else + card->ext_csd.data_sector_size = 512; + + if ((ext_csd[EXT_CSD_DATA_TAG_SUPPORT] & 1) && + (ext_csd[EXT_CSD_TAG_UNIT_SIZE] <= 8)) { + card->ext_csd.data_tag_unit_size = + ((unsigned int) 1 << ext_csd[EXT_CSD_TAG_UNIT_SIZE]) * + (card->ext_csd.data_sector_size); + } else { + card->ext_csd.data_tag_unit_size = 0; + } } out: @@ -938,7 +952,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, * If enhanced_area_en is TRUE, host needs to enable ERASE_GRP_DEF * bit. This bit will be lost every time after a reset or power off. */ - if (card->ext_csd.enhanced_area_en) { + if (card->ext_csd.enhanced_area_en || + (card->ext_csd.rev >= 3 && (host->caps2 & MMC_CAP2_HC_ERASE_SZ))) { err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_ERASE_GROUP_DEF, 1, card->ext_csd.generic_cmd6_time); @@ -1033,22 +1048,6 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, } /* - * Enable HPI feature (if supported) - */ - if (card->ext_csd.hpi) { - err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, - EXT_CSD_HPI_MGMT, 1, 0); - if (err && err != -EBADMSG) - goto free_card; - if (err) { - pr_warning("%s: Enabling HPI failed\n", - mmc_hostname(card->host)); - err = 0; - } else - card->ext_csd.hpi_en = 1; - } - - /* * Compute bus speed. */ max_dtr = (unsigned int)-1; @@ -1097,9 +1096,12 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, * 4. execute tuning for HS200 */ if ((host->caps2 & MMC_CAP2_HS200) && - card->host->ops->execute_tuning) + card->host->ops->execute_tuning) { + mmc_host_clk_hold(card->host); err = card->host->ops->execute_tuning(card->host, MMC_SEND_TUNING_BLOCK_HS200); + mmc_host_clk_release(card->host); + } if (err) { pr_warning("%s: tuning execution failed\n", mmc_hostname(card->host)); @@ -1219,6 +1221,23 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, } /* |