Spelling fix: explicitly

From: Jean Delvare <khali@linux-fr.org>

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>

19 files changed, 23 insertions, 23 deletions

diff --git a/arch/cris/arch-v10/kernel/entry.S b/arch/cris/arch-v10/kernel/entry.S
index ae45d4522e6..c5844cb70f0 100644
--- a/arch/cris/arch-v10/kernel/entry.S
+++ b/arch/cris/arch-v10/kernel/entry.S
@@ -97,7 +97,7 @@
  *
  *  Revision 1.36  2001/11/22 13:36:36  bjornw
  *  * In ret_from_intr, check regs->dccr for usermode reentrance instead of
- *    DCCR explicitely (because the latter might not reflect current reality)
+ *    DCCR explicitly (because the latter might not reflect current reality)
  *  * In mmu_bus_fault, set $r9 _after_ calling the C-code instead of before
  *    since $r9 is call-clobbered and is potentially needed afterwards
  *
diff --git a/arch/cris/arch-v10/kernel/kgdb.c b/arch/cris/arch-v10/kernel/kgdb.c
index 07628a13c6c..77f4b142372 100644
--- a/arch/cris/arch-v10/kernel/kgdb.c
+++ b/arch/cris/arch-v10/kernel/kgdb.c
@@ -959,7 +959,7 @@ stub_is_stopped(int sigval)
 
 	/* Send register contents. We probably only need to send the
 	 * PC, frame pointer and stack pointer here. Other registers will be
-	 * explicitely asked for. But for now, send all. 
+	 * explicitly asked for. But for now, send all.
 	 */
 	
 	for (regno = R0; regno <= USP; regno++) {
diff --git a/arch/cris/arch-v10/lib/dram_init.S b/arch/cris/arch-v10/lib/dram_init.S
index 9cf83932cd5..6a6bdfd6984 100644
--- a/arch/cris/arch-v10/lib/dram_init.S
+++ b/arch/cris/arch-v10/lib/dram_init.S
@@ -40,7 +40,7 @@
  * Copy warning from head.S about r8 and r9
  *
  * Revision 1.7  2001/04/18 12:05:39  bjornw
- * Fixed comments, and explicitely include config.h to be sure its there
+ * Fixed comments, and explicitly include config.h to be sure its there
  *
  * Revision 1.6  2001/04/10 06:20:16  starvik
  * Delay should be 200us, not 200ns
@@ -66,7 +66,7 @@
  */
 
 /* Just to be certain the config file is included, we include it here
- * explicitely instead of depending on it being included in the file that
+ * explicitly instead of depending on it being included in the file that
  * uses this code.
  */
 
diff --git a/arch/cris/arch-v32/lib/dram_init.S b/arch/cris/arch-v32/lib/dram_init.S
index 158b3dbb4d9..218fbe259ee 100644
--- a/arch/cris/arch-v32/lib/dram_init.S
+++ b/arch/cris/arch-v32/lib/dram_init.S
@@ -12,7 +12,7 @@
  */
 
 /* Just to be certain the config file is included, we include it here
- * explicitely instead of depending on it being included in the file that
+ * explicitly instead of depending on it being included in the file that
  * uses this code.
  */
 
diff --git a/arch/powerpc/kernel/cpu_setup_6xx.S b/arch/powerpc/kernel/cpu_setup_6xx.S
index 8b4a4ee85ec..f1ee0b3f78f 100644
--- a/arch/powerpc/kernel/cpu_setup_6xx.S
+++ b/arch/powerpc/kernel/cpu_setup_6xx.S
@@ -113,7 +113,7 @@ setup_604_hid0:
  * around #3 and with the same fix we use. We may want to
  * check if the CPU is using 60x bus mode in which case
  * the workaround for errata #4 is useless. Also, we may
- * want to explicitely clear HID0_NOPDST as this is not
+ * want to explicitly clear HID0_NOPDST as this is not
  * needed once we have applied workaround #5 (though it's
  * not set by Apple's firmware at least).
  */
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 2250f9e6c5c..b0e5deb4274 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -491,7 +491,7 @@ struct irq_host *irq_alloc_host(struct device_node *of_node,
 
 			/* Legacy flags are left to default at this point,
 			 * one can then use irq_create_mapping() to
-			 * explicitely change them
+			 * explicitly change them
 			 */
 			ops->map(host, i, i);
 		}
diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c
index da316d13d7f..21a9c0b69a1 100644
--- a/drivers/input/mouse/psmouse-base.c
+++ b/drivers/input/mouse/psmouse-base.c
@@ -906,7 +906,7 @@ static void psmouse_activate(struct psmouse *psmouse)
 
 /*
  * psmouse_deactivate() puts the mouse into poll mode so that we don't get motion
- * reports from it unless we explicitely request it.
+ * reports from it unless we explicitly request it.
  */
 
 static void psmouse_deactivate(struct psmouse *psmouse)
diff --git a/drivers/input/mouse/vsxxxaa.c b/drivers/input/mouse/vsxxxaa.c
index 4a321576f34..404eedd5ffa 100644
--- a/drivers/input/mouse/vsxxxaa.c
+++ b/drivers/input/mouse/vsxxxaa.c
@@ -330,7 +330,7 @@ vsxxxaa_handle_POR_packet (struct vsxxxaa *mouse)
 
 	/*
 	 * Check for Power-On-Reset packets. These are sent out
-	 * after plugging the mouse in, or when explicitely
+	 * after plugging the mouse in, or when explicitly
 	 * requested by sending 'T'.
 	 *
 	 * [0]:	1	0	1	0	R3	R2	R1	R0
diff --git a/drivers/isdn/act2000/act2000_isa.c b/drivers/isdn/act2000/act2000_isa.c
index 09ea50dd345..819ea85576a 100644
--- a/drivers/isdn/act2000/act2000_isa.c
+++ b/drivers/isdn/act2000/act2000_isa.c
@@ -126,7 +126,7 @@ act2000_isa_enable_irq(act2000_card * card)
 
 /*
  * Install interrupt handler, enable irq on card.
- * If irq is -1, choose next free irq, else irq is given explicitely.
+ * If irq is -1, choose next free irq, else irq is given explicitly.
  */
 int
 act2000_isa_config_irq(act2000_card * card, short irq)
diff --git a/drivers/isdn/hardware/eicon/capifunc.c b/drivers/isdn/hardware/eicon/capifunc.c
index 82edc1c1db7..4d425c644d4 100644
--- a/drivers/isdn/hardware/eicon/capifunc.c
+++ b/drivers/isdn/hardware/eicon/capifunc.c
@@ -321,7 +321,7 @@ void sendf(APPL * appl, word command, dword Id, word Number, byte * format, ...)
 				  DBG_BLK((((char *)(long)GET_DWORD(&msg.info.data_b3_ind.Data)) + i,
 				  	((dlength - i) < 256) ? (dlength - i) : 256))
 				  if (!(myDriverDebugHandle.dbgMask & DL_PRV0))
-					  break; /* not more if not explicitely requested */
+					  break; /* not more if not explicitly requested */
 				}
 			}
 			break;
@@ -965,7 +965,7 @@ static u16 diva_send_message(struct capi_ctr *ctrl,
 					((GET_WORD(&msg->info.data_b3_req.Data_Length) - j) <
 					  256) ? (GET_WORD(&msg->info.data_b3_req.Data_Length) - j) : 256))
 				if (!(myDriverDebugHandle.dbgMask & DL_PRV0))
-					break;	/* not more if not explicitely requested */
+					break;	/* not more if not explicitly requested */
 			}
 		}
 #endif
diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c
index f7c509b7a8e..dc741d3a453 100644
--- a/drivers/macintosh/via-pmu.c
+++ b/drivers/macintosh/via-pmu.c
@@ -1521,7 +1521,7 @@ pmu_sr_intr(void)
 			req = current_req;
 			/* 
 			 * For PMU sleep and freq change requests, we lock the
-			 * PMU until it's explicitely unlocked. This avoids any
+			 * PMU until it's explicitly unlocked. This avoids any
 			 * spurrious event polling getting in
 			 */
 			current_req = req->next;
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_xmit.h b/drivers/net/wireless/bcm43xx/bcm43xx_xmit.h
index 9ecf2bf0d25..47c135a7f4d 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_xmit.h
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_xmit.h
@@ -87,7 +87,7 @@ void bcm43xx_generate_txhdr(struct bcm43xx_private *bcm,
 
 /* RX header as received from the hardware. */
 struct bcm43xx_rxhdr {
-	/* Frame Length. Must be generated explicitely in PIO mode. */
+	/* Frame Length. Must be generated explicitly in PIO mode. */
 	__le16 frame_length;
 	PAD_BYTES(2);
 	/* Flags field 1 */
diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c
index c144e3cdb89..92314c365af 100644
--- a/drivers/net/wireless/ipw2100.c
+++ b/drivers/net/wireless/ipw2100.c
@@ -6012,7 +6012,7 @@ static struct net_device *ipw2100_alloc_device(struct pci_dev *pci_dev,
 	 * ends up causing problems.  So, we just handle
 	 * the WX extensions through the ipw2100_ioctl interface */
 
-	/* memset() puts everything to 0, so we only have explicitely set
+	/* memset() puts everything to 0, so we only have explicitly set
 	 * those values that need to be something else */
 
 	/* If power management is turned on, default to AUTO mode */
@@ -7470,7 +7470,7 @@ static int ipw2100_wx_set_power(struct net_device *dev,
 	switch (wrqu->power.flags & IW_POWER_MODE) {
 	case IW_POWER_ON:	/* If not specified */
 	case IW_POWER_MODE:	/* If set all mask */
-	case IW_POWER_ALL_R:	/* If explicitely state all */
+	case IW_POWER_ALL_R:	/* If explicitly state all */
 		break;
 	default:		/* Otherwise we don't support it */
 		IPW_DEBUG_WX("SET PM Mode: %X not supported.\n",
diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c
index feb8fcbab2d..e3c828401b9 100644
--- a/drivers/net/wireless/ipw2200.c
+++ b/drivers/net/wireless/ipw2200.c
@@ -9603,7 +9603,7 @@ static int ipw_wx_set_power(struct net_device *dev,
 	switch (wrqu->power.flags & IW_POWER_MODE) {
 	case IW_POWER_ON:	/* If not specified */
 	case IW_POWER_MODE:	/* If set all mask */
-	case IW_POWER_ALL_R:	/* If explicitely state all */
+	case IW_POWER_ALL_R:	/* If explicitly state all */
 		break;
 	default:		/* Otherwise we don't support it */
 		IPW_DEBUG_WX("SET PM Mode: %X not supported.\n",
diff --git a/drivers/scsi/sym53c8xx_2/sym_fw2.h b/drivers/scsi/sym53c8xx_2/sym_fw2.h
index 6e5b952312e..ae1fb179b88 100644
--- a/drivers/scsi/sym53c8xx_2/sym_fw2.h
+++ b/drivers/scsi/sym53c8xx_2/sym_fw2.h
@@ -1781,7 +1781,7 @@ static struct SYM_FWB_SCR SYM_FWB_SCR = {
 	 *  While testing with bogus QUANTUM drives, the C1010 
 	 *  sometimes raised a spurious phase mismatch with 
 	 *  WSR and the CHMOV(1) triggered another PM.
-	 *  Waiting explicitely for the PHASE seemed to avoid 
+	 *  Waiting explicitly for the PHASE seemed to avoid
 	 *  the nested phase mismatch. Btw, this didn't happen 
 	 *  using my IBM drives.
 	 */
diff --git a/drivers/scsi/wd33c93.h b/drivers/scsi/wd33c93.h
index 61ffb860dac..00123f2383d 100644
--- a/drivers/scsi/wd33c93.h
+++ b/drivers/scsi/wd33c93.h
@@ -155,7 +155,7 @@
 #define WD33C93_FS_12_15 OWNID_FS_12
 #define WD33C93_FS_16_20 OWNID_FS_16
 
-   /* pass input-clock explicitely. accepted mhz values are 8-10,12-20 */
+   /* pass input-clock explicitly. accepted mhz values are 8-10,12-20 */
 #define WD33C93_FS_MHZ(mhz) (mhz)
 
    /* Control register */
diff --git a/include/asm-powerpc/io.h b/include/asm-powerpc/io.h
index bf14ab4ef4c..e44cdfc8493 100644
--- a/include/asm-powerpc/io.h
+++ b/include/asm-powerpc/io.h
@@ -522,7 +522,7 @@ static inline void name at					\
 #else
 /*
  * Enforce synchronisation of stores vs. spin_unlock
- * (this does it explicitely, though our implementation of spin_unlock
+ * (this does it explicitly, though our implementation of spin_unlock
  * does it implicitely too)
  */
 static inline void mmiowb(void)
diff --git a/include/net/irda/irttp.h b/include/net/irda/irttp.h
index cf80c1af585..32c385dd9e0 100644
--- a/include/net/irda/irttp.h
+++ b/include/net/irda/irttp.h
@@ -56,7 +56,7 @@
 
 /* Receive queue sizes */
 /* Minimum of credit that the peer should hold.
- * If the peer has less credits than 9 frames, we will explicitely send
+ * If the peer has less credits than 9 frames, we will explicitly send
  * him some credits (through irttp_give_credit() and a specific frame).
  * Note that when we give credits it's likely that it won't be sent in
  * this LAP window, but in the next one. So, we make sure that the peer
@@ -66,7 +66,7 @@
 /* This is the default maximum number of credits held by the peer, so the
  * default maximum number of frames he can send us before needing flow
  * control answer from us (this may be negociated differently at TSAP setup).
- * We want to minimise the number of times we have to explicitely send some
+ * We want to minimise the number of times we have to explicitly send some
  * credit to the peer, hoping we can piggyback it on the return data. In
  * particular, it doesn't make sense for us to send credit more than once
  * per LAP window.
diff --git a/net/ieee80211/ieee80211_wx.c b/net/ieee80211/ieee80211_wx.c
index 9b58dd67acb..d309e8f1999 100644
--- a/net/ieee80211/ieee80211_wx.c
+++ b/net/ieee80211/ieee80211_wx.c
@@ -409,7 +409,7 @@ int ieee80211_wx_set_encode(struct ieee80211_device *ieee,
 					       (*crypt)->priv);
 		sec.flags |= (1 << key);
 		/* This ensures a key will be activated if no key is
-		 * explicitely set */
+		 * explicitly set */
 		if (key == sec.active_key)
 			sec.flags |= SEC_ACTIVE_KEY;