diff options
| author | Bjorn Helgaas <bhelgaas@google.com> | 2014-03-11 14:22:19 -0600 |
|---|---|---|
| committer | Ben Hutchings <ben@decadent.org.uk> | 2014-04-02 00:59:02 +0100 |
| commit | f41b3d0bf8050e97ec8118537547213e85ce093c (patch) | |
| tree | cb9506d90d3f5c273f5ddd702d0ec77b0df006f1 | |
| parent | dcd8e204d28377b29539f7e97bf91fc7ef50ab17 (diff) | |
PCI: Enable INTx in pci_reenable_device() only when MSI/MSI-X not enabled
commit 3cdeb713dc66057b50682048c151eae07b186c42 upstream.
Andreas reported that after 1f42db786b14 ("PCI: Enable INTx if BIOS left
them disabled"), pciehp surprise removal stopped working.
This happens because pci_reenable_device() on the hotplug bridge (used in
the pciehp_configure_device() path) clears the Interrupt Disable bit, which
apparently breaks the bridge's MSI hotplug event reporting.
Previously we cleared the Interrupt Disable bit in do_pci_enable_device(),
which is used by both pci_enable_device() and pci_reenable_device(). But
we use pci_reenable_device() after the driver may have enabled MSI or
MSI-X, and we *set* Interrupt Disable as part of enabling MSI/MSI-X.
This patch clears Interrupt Disable only when MSI/MSI-X has not been
enabled.
Fixes: 1f42db786b14 PCI: Enable INTx if BIOS left them disabled
Link: https://bugzilla.kernel.org/show_bug.cgi?id=71691
Reported-and-tested-by: Andreas Noever <andreas.noever@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
| -rw-r--r-- | drivers/pci/pci.c | 3 |
1 files changed, 3 insertions, 0 deletions
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index fd4b825cb15..4c3a9e9bf28 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1089,6 +1089,9 @@ static int do_pci_enable_device(struct pci_dev *dev, int bars) return err; pci_fixup_device(pci_fixup_enable, dev); + if (dev->msi_enabled || dev->msix_enabled) + return 0; + pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); if (pin) { pci_read_config_word(dev, PCI_COMMAND, &cmd); |