aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorGreg Kroah-Hartman <gregkh@suse.de>2010-05-17 10:33:41 -0700
committerGreg Kroah-Hartman <gregkh@suse.de>2010-05-20 13:21:46 -0700
commit42047699fae79190fd7ebd0b02fa4bde016adc04 (patch)
tree336e89513a29c0eb862d006703cfb53c5c56e2cc
parent7f1cccd3ec8789e52897bc34420ca81a5e2edeab (diff)
USB: mct_u232.h: checkpatch cleanups
Minor whitespace cleanups to make checkpatch happy. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-rw-r--r--drivers/usb/serial/mct_u232.h254
1 files changed, 133 insertions, 121 deletions
diff --git a/drivers/usb/serial/mct_u232.h b/drivers/usb/serial/mct_u232.h
index 7417d5ce1e2..3a3f5e6b8f9 100644
--- a/drivers/usb/serial/mct_u232.h
+++ b/drivers/usb/serial/mct_u232.h
@@ -42,36 +42,44 @@
#define MCT_U232_SET_REQUEST_TYPE 0x40
#define MCT_U232_GET_REQUEST_TYPE 0xc0
-#define MCT_U232_GET_MODEM_STAT_REQUEST 2 /* Get Modem Status Register (MSR) */
-#define MCT_U232_GET_MODEM_STAT_SIZE 1
+/* Get Modem Status Register (MSR) */
+#define MCT_U232_GET_MODEM_STAT_REQUEST 2
+#define MCT_U232_GET_MODEM_STAT_SIZE 1
-#define MCT_U232_GET_LINE_CTRL_REQUEST 6 /* Get Line Control Register (LCR) */
-#define MCT_U232_GET_LINE_CTRL_SIZE 1 /* ... not used by this driver */
+/* Get Line Control Register (LCR) */
+/* ... not used by this driver */
+#define MCT_U232_GET_LINE_CTRL_REQUEST 6
+#define MCT_U232_GET_LINE_CTRL_SIZE 1
-#define MCT_U232_SET_BAUD_RATE_REQUEST 5 /* Set Baud Rate Divisor */
-#define MCT_U232_SET_BAUD_RATE_SIZE 4
+/* Set Baud Rate Divisor */
+#define MCT_U232_SET_BAUD_RATE_REQUEST 5
+#define MCT_U232_SET_BAUD_RATE_SIZE 4
-#define MCT_U232_SET_LINE_CTRL_REQUEST 7 /* Set Line Control Register (LCR) */
-#define MCT_U232_SET_LINE_CTRL_SIZE 1
+/* Set Line Control Register (LCR) */
+#define MCT_U232_SET_LINE_CTRL_REQUEST 7
+#define MCT_U232_SET_LINE_CTRL_SIZE 1
-#define MCT_U232_SET_MODEM_CTRL_REQUEST 10 /* Set Modem Control Register (MCR) */
-#define MCT_U232_SET_MODEM_CTRL_SIZE 1
+/* Set Modem Control Register (MCR) */
+#define MCT_U232_SET_MODEM_CTRL_REQUEST 10
+#define MCT_U232_SET_MODEM_CTRL_SIZE 1
-/* This USB device request code is not well understood. It is transmitted by
- the MCT-supplied Windows driver whenever the baud rate changes.
-*/
-#define MCT_U232_SET_UNKNOWN1_REQUEST 11 /* Unknown functionality */
-#define MCT_U232_SET_UNKNOWN1_SIZE 1
+/*
+ * This USB device request code is not well understood. It is transmitted by
+ * the MCT-supplied Windows driver whenever the baud rate changes.
+ */
+#define MCT_U232_SET_UNKNOWN1_REQUEST 11 /* Unknown functionality */
+#define MCT_U232_SET_UNKNOWN1_SIZE 1
-/* This USB device request code appears to control whether CTS is required
- during transmission.
-
- Sending a zero byte allows data transmission to a device which is not
- asserting CTS. Sending a '1' byte will cause transmission to be deferred
- until the device asserts CTS.
-*/
-#define MCT_U232_SET_CTS_REQUEST 12
-#define MCT_U232_SET_CTS_SIZE 1
+/*
+ * This USB device request code appears to control whether CTS is required
+ * during transmission.
+ *
+ * Sending a zero byte allows data transmission to a device which is not
+ * asserting CTS. Sending a '1' byte will cause transmission to be deferred
+ * until the device asserts CTS.
+ */
+#define MCT_U232_SET_CTS_REQUEST 12
+#define MCT_U232_SET_CTS_SIZE 1
#define MCT_U232_MAX_SIZE 4 /* of MCT_XXX_SIZE */
@@ -81,7 +89,8 @@
* and "Intel solution". They are the regular MCT and "Sitecom" for us.
* This is pointless to document in the header, see the code for the bits.
*/
-static int mct_u232_calculate_baud_rate(struct usb_serial *serial, speed_t value, speed_t *result);
+static int mct_u232_calculate_baud_rate(struct usb_serial *serial,
+ speed_t value, speed_t *result);
/*
* Line Control Register (LCR)
@@ -125,16 +134,16 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial, speed_t value
/*
* Line Status Register (LSR)
*/
-#define MCT_U232_LSR_INDEX 1 /* data[index] */
-#define MCT_U232_LSR_ERR 0x80 /* OE | PE | FE | BI */
-#define MCT_U232_LSR_TEMT 0x40 /* transmit register empty */
-#define MCT_U232_LSR_THRE 0x20 /* transmit holding register empty */
-#define MCT_U232_LSR_BI 0x10 /* break indicator */
-#define MCT_U232_LSR_FE 0x08 /* framing error */
-#define MCT_U232_LSR_OE 0x02 /* overrun error */
-#define MCT_U232_LSR_PE 0x04 /* parity error */
-#define MCT_U232_LSR_OE 0x02 /* overrun error */
-#define MCT_U232_LSR_DR 0x01 /* receive data ready */
+#define MCT_U232_LSR_INDEX 1 /* data[index] */
+#define MCT_U232_LSR_ERR 0x80 /* OE | PE | FE | BI */
+#define MCT_U232_LSR_TEMT 0x40 /* transmit register empty */
+#define MCT_U232_LSR_THRE 0x20 /* transmit holding register empty */
+#define MCT_U232_LSR_BI 0x10 /* break indicator */
+#define MCT_U232_LSR_FE 0x08 /* framing error */
+#define MCT_U232_LSR_OE 0x02 /* overrun error */
+#define MCT_U232_LSR_PE 0x04 /* parity error */
+#define MCT_U232_LSR_OE 0x02 /* overrun error */
+#define MCT_U232_LSR_DR 0x01 /* receive data ready */
/* -----------------------------------------------------------------------------
@@ -143,10 +152,10 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial, speed_t value
*
* The technical details of the device have been acquired be using "SniffUSB"
* and the vendor-supplied device driver (version 2.3A) under Windows98. To
- * identify the USB vendor-specific requests and to assign them to terminal
+ * identify the USB vendor-specific requests and to assign them to terminal
* settings (flow control, baud rate, etc.) the program "SerialSettings" from
* William G. Greathouse has been proven to be very useful. I also used the
- * Win98 "HyperTerminal" and "usb-robot" on Linux for testing. The results and
+ * Win98 "HyperTerminal" and "usb-robot" on Linux for testing. The results and
* observations are summarized below:
*
* The USB requests seem to be directly mapped to the registers of a 8250,
@@ -186,33 +195,33 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial, speed_t value
* Data: LCR (see below)
*
* Bit 7: Divisor Latch Access Bit (DLAB). When set, access to the data
- * transmit/receive register (THR/RBR) and the Interrupt Enable Register
- * (IER) is disabled. Any access to these ports is now redirected to the
- * Divisor Latch Registers. Setting this bit, loading the Divisor
- * Registers, and clearing DLAB should be done with interrupts disabled.
+ * transmit/receive register (THR/RBR) and the Interrupt Enable Register
+ * (IER) is disabled. Any access to these ports is now redirected to the
+ * Divisor Latch Registers. Setting this bit, loading the Divisor
+ * Registers, and clearing DLAB should be done with interrupts disabled.
* Bit 6: Set Break. When set to "1", the transmitter begins to transmit
- * continuous Spacing until this bit is set to "0". This overrides any
- * bits of characters that are being transmitted.
+ * continuous Spacing until this bit is set to "0". This overrides any
+ * bits of characters that are being transmitted.
* Bit 5: Stick Parity. When parity is enabled, setting this bit causes parity
- * to always be "1" or "0", based on the value of Bit 4.
+ * to always be "1" or "0", based on the value of Bit 4.
* Bit 4: Even Parity Select (EPS). When parity is enabled and Bit 5 is "0",
- * setting this bit causes even parity to be transmitted and expected.
- * Otherwise, odd parity is used.
+ * setting this bit causes even parity to be transmitted and expected.
+ * Otherwise, odd parity is used.
* Bit 3: Parity Enable (PEN). When set to "1", a parity bit is inserted
- * between the last bit of the data and the Stop Bit. The UART will also
- * expect parity to be present in the received data.
+ * between the last bit of the data and the Stop Bit. The UART will also
+ * expect parity to be present in the received data.
* Bit 2: Number of Stop Bits (STB). If set to "1" and using 5-bit data words,
- * 1.5 Stop Bits are transmitted and expected in each data word. For
- * 6, 7 and 8-bit data words, 2 Stop Bits are transmitted and expected.
- * When this bit is set to "0", one Stop Bit is used on each data word.
+ * 1.5 Stop Bits are transmitted and expected in each data word. For
+ * 6, 7 and 8-bit data words, 2 Stop Bits are transmitted and expected.
+ * When this bit is set to "0", one Stop Bit is used on each data word.
* Bit 1: Word Length Select Bit #1 (WLSB1)
* Bit 0: Word Length Select Bit #0 (WLSB0)
- * Together these bits specify the number of bits in each data word.
- * 1 0 Word Length
- * 0 0 5 Data Bits
- * 0 1 6 Data Bits
- * 1 0 7 Data Bits
- * 1 1 8 Data Bits
+ * Together these bits specify the number of bits in each data word.
+ * 1 0 Word Length
+ * 0 0 5 Data Bits
+ * 0 1 6 Data Bits
+ * 1 0 7 Data Bits
+ * 1 1 8 Data Bits
*
* SniffUSB observations: Bit 7 seems not to be used. There seem to be two bugs
* in the Win98 driver: the break does not work (bit 6 is not asserted) and the
@@ -234,20 +243,20 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial, speed_t value
* Bit 6: Reserved, always 0.
* Bit 5: Reserved, always 0.
* Bit 4: Loop-Back Enable. When set to "1", the UART transmitter and receiver
- * are internally connected together to allow diagnostic operations. In
- * addition, the UART modem control outputs are connected to the UART
- * modem control inputs. CTS is connected to RTS, DTR is connected to
- * DSR, OUT1 is connected to RI, and OUT 2 is connected to DCD.
+ * are internally connected together to allow diagnostic operations. In
+ * addition, the UART modem control outputs are connected to the UART
+ * modem control inputs. CTS is connected to RTS, DTR is connected to
+ * DSR, OUT1 is connected to RI, and OUT 2 is connected to DCD.
* Bit 3: OUT 2. An auxiliary output that the host processor may set high or
- * low. In the IBM PC serial adapter (and most clones), OUT 2 is used
- * to tri-state (disable) the interrupt signal from the
- * 8250/16450/16550 UART.
+ * low. In the IBM PC serial adapter (and most clones), OUT 2 is used
+ * to tri-state (disable) the interrupt signal from the
+ * 8250/16450/16550 UART.
* Bit 2: OUT 1. An auxiliary output that the host processor may set high or
- * low. This output is not used on the IBM PC serial adapter.
+ * low. This output is not used on the IBM PC serial adapter.
* Bit 1: Request to Send (RTS). When set to "1", the output of the UART -RTS
- * line is Low (Active).
+ * line is Low (Active).
* Bit 0: Data Terminal Ready (DTR). When set to "1", the output of the UART
- * -DTR line is Low (Active).
+ * -DTR line is Low (Active).
*
* SniffUSB observations: Bit 2 and 4 seem not to be used but bit 3 has been
* seen _always_ set.
@@ -264,22 +273,22 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial, speed_t value
* Data: MSR (see below)
*
* Bit 7: Data Carrier Detect (CD). Reflects the state of the DCD line on the
- * UART.
+ * UART.
* Bit 6: Ring Indicator (RI). Reflects the state of the RI line on the UART.
* Bit 5: Data Set Ready (DSR). Reflects the state of the DSR line on the UART.
* Bit 4: Clear To Send (CTS). Reflects the state of the CTS line on the UART.
* Bit 3: Delta Data Carrier Detect (DDCD). Set to "1" if the -DCD line has
- * changed state one more more times since the last time the MSR was
- * read by the host.
+ * changed state one more more times since the last time the MSR was
+ * read by the host.
* Bit 2: Trailing Edge Ring Indicator (TERI). Set to "1" if the -RI line has
- * had a low to high transition since the last time the MSR was read by
- * the host.
+ * had a low to high transition since the last time the MSR was read by
+ * the host.
* Bit 1: Delta Data Set Ready (DDSR). Set to "1" if the -DSR line has changed
- * state one more more times since the last time the MSR was read by the
- * host.
+ * state one more more times since the last time the MSR was read by the
+ * host.
* Bit 0: Delta Clear To Send (DCTS). Set to "1" if the -CTS line has changed
- * state one more times since the last time the MSR was read by the
- * host.
+ * state one more times since the last time the MSR was read by the
+ * host.
*
* SniffUSB observations: the MSR is also returned as first byte on the
* interrupt-in endpoint 0x83 to signal changes of modem status lines. The USB
@@ -290,31 +299,34 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial, speed_t value
* --------------------------
*
* Bit 7 Error in Receiver FIFO. On the 8250/16450 UART, this bit is zero.
- * This bit is set to "1" when any of the bytes in the FIFO have one or
- * more of the following error conditions: PE, FE, or BI.
+ * This bit is set to "1" when any of the bytes in the FIFO have one
+ * or more of the following error conditions: PE, FE, or BI.
* Bit 6 Transmitter Empty (TEMT). When set to "1", there are no words
- * remaining in the transmit FIFO or the transmit shift register. The
- * transmitter is completely idle.
- * Bit 5 Transmitter Holding Register Empty (THRE). When set to "1", the FIFO
- * (or holding register) now has room for at least one additional word
- * to transmit. The transmitter may still be transmitting when this bit
- * is set to "1".
+ * remaining in the transmit FIFO or the transmit shift register. The
+ * transmitter is completely idle.
+ * Bit 5 Transmitter Holding Register Empty (THRE). When set to "1", the
+ * FIFO (or holding register) now has room for at least one additional
+ * word to transmit. The transmitter may still be transmitting when
+ * this bit is set to "1".
* Bit 4 Break Interrupt (BI). The receiver has detected a Break signal.
- * Bit 3 Framing Error (FE). A Start Bit was detected but the Stop Bit did not
- * appear at the expected time. The received word is probably garbled.
- * Bit 2 Parity Error (PE). The parity bit was incorrect for the word received.
- * Bit 1 Overrun Error (OE). A new word was received and there was no room in
- * the receive buffer. The newly-arrived word in the shift register is
- * discarded. On 8250/16450 UARTs, the word in the holding register is
- * discarded and the newly- arrived word is put in the holding register.
+ * Bit 3 Framing Error (FE). A Start Bit was detected but the Stop Bit did
+ * not appear at the expected time. The received word is probably
+ * garbled.
+ * Bit 2 Parity Error (PE). The parity bit was incorrect for the word
+ * received.
+ * Bit 1 Overrun Error (OE). A new word was received and there was no room
+ * in the receive buffer. The newly-arrived word in the shift register
+ * is discarded. On 8250/16450 UARTs, the word in the holding register
+ * is discarded and the newly- arrived word is put in the holding
+ * register.
* Bit 0 Data Ready (DR). One or more words are in the receive FIFO that the
- * host may read. A word must be completely received and moved from the
- * shift register into the FIFO (or holding register for 8250/16450
- * designs) before this bit is set.
+ * host may read. A word must be completely received and moved from
+ * the shift register into the FIFO (or holding register for
+ * 8250/16450 designs) before this bit is set.
*
- * SniffUSB observations: the LSR is returned as second byte on the interrupt-in
- * endpoint 0x83 to signal error conditions. Such errors have been seen with
- * minicom/zmodem transfers (CRC errors).
+ * SniffUSB observations: the LSR is returned as second byte on the
+ * interrupt-in endpoint 0x83 to signal error conditions. Such errors have
+ * been seen with minicom/zmodem transfers (CRC errors).
*
*
* Unknown #1
@@ -364,16 +376,16 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial, speed_t value
* --------------
*
* SniffUSB observations: the bulk-out endpoint 0x1 and interrupt-in endpoint
- * 0x81 is used to transmit and receive characters. The second interrupt-in
- * endpoint 0x83 signals exceptional conditions like modem line changes and
+ * 0x81 is used to transmit and receive characters. The second interrupt-in
+ * endpoint 0x83 signals exceptional conditions like modem line changes and
* errors. The first byte returned is the MSR and the second byte the LSR.
*
*
* Other observations
* ------------------
*
- * Queued bulk transfers like used in visor.c did not work.
- *
+ * Queued bulk transfers like used in visor.c did not work.
+ *
*
* Properties of the USB device used (as found in /var/log/messages)
* -----------------------------------------------------------------
@@ -411,26 +423,26 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial, speed_t value
* bInterface Class:SubClass:Protocol = 00:00:00
* iInterface = 00
* Endpoint:
- * bLength = 7
- * bDescriptorType = 05
- * bEndpointAddress = 81 (in)
- * bmAttributes = 03 (Interrupt)
- * wMaxPacketSize = 0040
- * bInterval = 02
+ * bLength = 7
+ * bDescriptorType = 05
+ * bEndpointAddress = 81 (in)
+ * bmAttributes = 03 (Interrupt)
+ * wMaxPacketSize = 0040
+ * bInterval = 02
* Endpoint:
- * bLength = 7
- * bDescriptorType = 05
- * bEndpointAddress = 01 (out)
- * bmAttributes = 02 (Bulk)
- * wMaxPacketSize = 0040
- * bInterval = 00
+ * bLength = 7
+ * bDescriptorType = 05
+ * bEndpointAddress = 01 (out)
+ * bmAttributes = 02 (Bulk)
+ * wMaxPacketSize = 0040
+ * bInterval = 00
* Endpoint:
- * bLength = 7
- * bDescriptorType = 05
- * bEndpointAddress = 83 (in)
- * bmAttributes = 03 (Interrupt)
- * wMaxPacketSize = 0002
- * bInterval = 02
+ * bLength = 7
+ * bDescriptorType = 05
+ * bEndpointAddress = 83 (in)
+ * bmAttributes = 03 (Interrupt)
+ * wMaxPacketSize = 0002
+ * bInterval = 02
*
*
* Hardware details (added by Martin Hamilton, 2001/12/06)
@@ -440,7 +452,7 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial, speed_t value
* adaptor, which turns out to simply be a re-badged U232-P9. We
* know this because there is a sticky label on the circuit board
* which says "U232-P9" ;-)
- *
+ *
* The circuit board inside the adaptor contains a Philips PDIUSBD12
* USB endpoint chip and a Philips P87C52UBAA microcontroller with
* embedded UART. Exhaustive documentation for these is available at:
@@ -449,7 +461,7 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial, speed_t value
* http://www.semiconductors.philips.com/pip/pdiusbd12
*
* Thanks to Julian Highfield for the pointer to the Philips database.
- *
+ *
*/
#endif /* __LINUX_USB_SERIAL_MCT_U232_H */