Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (33 commits)
  OMAP3: PM: Boot message is not an error, and not helpful, remove it
  OMAP3: cpuidle: change the power domains modes determination logic
  OMAP3: cpuidle: code rework for improved readability
  OMAP3: cpuidle: re-organize the C-states data
  OMAP3: clean-up mach specific cpuidle data structures
  OMAP3 cpuidle: remove useless SDP specific timings
  usb: otg: OMAP4430: Powerdown the internal PHY when USB is disabled
  usb: otg: OMAP4430: Fixing the omap4430_phy_init function
  usb: musb: am35x: fix compile error when building am35x
  usb: musb: OMAP4430: Power down the PHY during board init
  omap: drop board-igep0030.c
  omap: igep0020: add support for IGEP3
  omap: igep0020: minor refactoring
  omap: igep0020: name refactoring for future merge with IGEP3
  omap: Remove support for omap2evm
  arm: omap2plus: GPIO cleanup
  omap: musb: introduce default board config
  omap: move detection of NAND CS to common-board-devices
  omap: use common initialization for PMIC i2c bus
  omap: consolidate touch screen initialization among different boards
  ...

54 files changed, 1110 insertions, 3384 deletions

diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 076db52ff67..d5f00d7eb07 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -21,58 +21,22 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP2=y
-CONFIG_ARCH_OMAP3=y
-CONFIG_ARCH_OMAP4=y
 CONFIG_OMAP_RESET_CLOCKS=y
 CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_MACH_OMAP_GENERIC=y
-CONFIG_ARCH_OMAP2420=y
-CONFIG_ARCH_OMAP2430=y
-CONFIG_ARCH_OMAP3430=y
-CONFIG_MACH_OMAP_H4=y
-CONFIG_MACH_OMAP_APOLLON=y
-CONFIG_MACH_OMAP_2430SDP=y
-CONFIG_MACH_OMAP3_BEAGLE=y
-CONFIG_MACH_DEVKIT8000=y
-CONFIG_MACH_OMAP_LDP=y
-CONFIG_MACH_OVERO=y
-CONFIG_MACH_OMAP3EVM=y
-CONFIG_MACH_OMAP3517EVM=y
-CONFIG_MACH_OMAP3_PANDORA=y
-CONFIG_MACH_OMAP3_TOUCHBOOK=y
-CONFIG_MACH_OMAP_3430SDP=y
-CONFIG_MACH_NOKIA_N8X0=y
-CONFIG_MACH_NOKIA_RX51=y
-CONFIG_MACH_OMAP_ZOOM2=y
-CONFIG_MACH_OMAP_ZOOM3=y
-CONFIG_MACH_CM_T35=y
-CONFIG_MACH_IGEP0020=y
-CONFIG_MACH_SBC3530=y
-CONFIG_MACH_OMAP_3630SDP=y
-CONFIG_MACH_OMAP_4430SDP=y
 CONFIG_ARM_THUMBEE=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
 CONFIG_ARM_ERRATA_411920=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
-# CONFIG_LOCAL_TIMERS is not set
-CONFIG_AEABI=y
 CONFIG_LEDS=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200"
 CONFIG_KEXEC=y
 CONFIG_FPE_NWFPE=y
-CONFIG_VFP=y
-CONFIG_NEON=y
 CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
 CONFIG_PM_DEBUG=y
-CONFIG_PM_RUNTIME=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -89,14 +53,6 @@ CONFIG_IP_PNP_RARP=y
 # CONFIG_IPV6 is not set
 CONFIG_NETFILTER=y
 CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=y
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
@@ -107,11 +63,9 @@ CONFIG_CFG80211=m
 CONFIG_MAC80211=m
 CONFIG_MAC80211_RC_PID=y
 CONFIG_MAC80211_RC_DEFAULT_PID=y
-CONFIG_MAC80211_LEDS=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_CONNECTOR=y
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
@@ -127,7 +81,6 @@ CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_EEPROM_LEGACY=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_MULTI_LUN=y
@@ -158,19 +111,15 @@ CONFIG_TOUCHSCREEN_ADS7846=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_TWL4030_PWRBUTTON=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_8250_NR_UARTS=32
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
 CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
 CONFIG_SPI=y
 CONFIG_SPI_OMAP24XX=y
 CONFIG_DEBUG_GPIO=y
@@ -181,10 +130,6 @@ CONFIG_POWER_SUPPLY=y
 CONFIG_WATCHDOG=y
 CONFIG_OMAP_WATCHDOG=y
 CONFIG_TWL4030_WATCHDOG=y
-CONFIG_MENELAUS=y
-CONFIG_TWL4030_CORE=y
-CONFIG_TWL4030_POWER=y
-CONFIG_REGULATOR=y
 CONFIG_REGULATOR_TWL4030=y
 CONFIG_REGULATOR_TPS65023=y
 CONFIG_REGULATOR_TPS6507X=y
@@ -208,7 +153,6 @@ CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_PLATFORM=y
 CONFIG_DISPLAY_SUPPORT=y
-# CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_FONTS=y
@@ -217,25 +161,20 @@ CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 CONFIG_SOUND=m
 CONFIG_SND=m
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
 CONFIG_SND_VERBOSE_PRINTK=y
 CONFIG_SND_DEBUG=y
-CONFIG_SND_USB_AUDIO=y
-CONFIG_SND_SOC=y
-CONFIG_SND_OMAP_SOC=y
-CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_SOC=m
+CONFIG_SND_OMAP_SOC=m
+CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_DEVICEFS=y
 CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG_WHITELIST is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_MUSB_OTG is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-CONFIG_USB_MUSB_DEBUG=y
 CONFIG_USB_WDM=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_LIBUSUAL=y
@@ -250,18 +189,12 @@ CONFIG_MMC_UNSAFE_RESUME=y
 CONFIG_SDIO_UART=y
 CONFIG_MMC_OMAP=y
 CONFIG_MMC_OMAP_HS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_TWL92330=y
 CONFIG_RTC_DRV_TWL4030=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
 CONFIG_QUOTA=y
 CONFIG_QFMT_V2=y
 CONFIG_MSDOS_FS=y
@@ -285,12 +218,10 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_PRINTK_TIME=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_SCHEDSTATS=y
 CONFIG_TIMER_STATS=y
 CONFIG_PROVE_LOCKING=y
-# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index b997a35830f..19d5891c48e 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -288,6 +288,7 @@ config MACH_IGEP0030
 	depends on ARCH_OMAP3
 	default y
 	select OMAP_PACKAGE_CBB
+	select MACH_IGEP0020
 
 config MACH_SBC3530
 	bool "OMAP3 SBC STALKER board"
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 66dfbccacd2..b1480779440 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -229,8 +229,6 @@ obj-$(CONFIG_MACH_CM_T35)		+= board-cm-t35.o \
 obj-$(CONFIG_MACH_CM_T3517)		+= board-cm-t3517.o
 obj-$(CONFIG_MACH_IGEP0020)		+= board-igep0020.o \
 					   hsmmc.o
-obj-$(CONFIG_MACH_IGEP0030)		+= board-igep0030.o \
-					   hsmmc.o
 obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK)	+= board-omap3touchbook.o \
 					   hsmmc.o
 obj-$(CONFIG_MACH_OMAP_4430SDP)		+= board-4430sdp.o \
@@ -270,3 +268,5 @@ obj-$(CONFIG_ARCH_OMAP4)		+= hwspinlock.o
 
 disp-$(CONFIG_OMAP2_DSS)		:= display.o
 obj-y					+= $(disp-m) $(disp-y)
+
+obj-y					+= common-board-devices.o
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 1fa6bb896f4..d54969be0a5 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -41,6 +41,7 @@
 
 #include "mux.h"
 #include "hsmmc.h"
+#include "common-board-devices.h"
 
 #define SDP2430_CS0_BASE	0x04000000
 #define SECONDARY_LCD_GPIO		147
@@ -180,15 +181,6 @@ static struct twl4030_platform_data sdp2430_twldata = {
 	.vmmc1		= &sdp2430_vmmc1,
 };
 
-static struct i2c_board_info __initdata sdp2430_i2c_boardinfo[] = {
-	{
-		I2C_BOARD_INFO("twl4030", 0x48),
-		.flags = I2C_CLIENT_WAKE,
-		.irq = INT_24XX_SYS_NIRQ,
-		.platform_data = &sdp2430_twldata,
-	},
-};
-
 static struct i2c_board_info __initdata sdp2430_i2c1_boardinfo[] = {
 	{
 		I2C_BOARD_INFO("isp1301_omap", 0x2D),
@@ -201,8 +193,7 @@ static int __init omap2430_i2c_init(void)
 {
 	omap_register_i2c_bus(1, 100, sdp2430_i2c1_boardinfo,
 			ARRAY_SIZE(sdp2430_i2c1_boardinfo));
-	omap_register_i2c_bus(2, 2600, sdp2430_i2c_boardinfo,
-			ARRAY_SIZE(sdp2430_i2c_boardinfo));
+	omap2_pmic_init("twl4030", &sdp2430_twldata);
 	return 0;
 }
 
@@ -217,11 +208,6 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
 	{}	/* Terminator */
 };
 
-static struct omap_musb_board_data musb_board_data = {
-	.interface_type		= MUSB_INTERFACE_ULPI,
-	.mode			= MUSB_OTG,
-	.power			= 100,
-};
 static struct omap_usb_config sdp2430_usb_config __initdata = {
 	.otg		= 1,
 #ifdef  CONFIG_USB_GADGET_OMAP
@@ -240,8 +226,6 @@ static struct omap_board_mux board_mux[] __initdata = {
 
 static void __init omap_2430sdp_init(void)
 {
-	int ret;
-
 	omap2430_mux_init(board_mux, OMAP_PACKAGE_ZAC);
 
 	omap_board_config = sdp2430_config;
@@ -255,14 +239,13 @@ static void __init omap_2430sdp_init(void)
 	omap2_usbfs_init(&sdp2430_usb_config);
 
 	omap_mux_init_signal("usb0hs_stp", OMAP_PULL_ENA | OMAP_PULL_UP);
-	usb_musb_init(&musb_board_data);
+	usb_musb_init(NULL);
 
 	board_smc91x_init();
 
 	/* Turn off secondary LCD backlight */
-	ret = gpio_request(SECONDARY_LCD_GPIO, "Secondary LCD backlight");
-	if (ret == 0)
-		gpio_direction_output(SECONDARY_LCD_GPIO, 0);
+	gpio_request_one(SECONDARY_LCD_GPIO, GPIOF_OUT_INIT_LOW,
+			 "Secondary LCD backlight");
 }
 
 static void __init omap_2430sdp_map_io(void)
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 23244cd0a5b..ae2963a9804 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -19,7 +19,6 @@
 #include <linux/input.h>
 #include <linux/input/matrix_keypad.h>
 #include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
 #include <linux/i2c/twl.h>
 #include <linux/regulator/machine.h>
 #include <linux/io.h>
@@ -48,6 +47,7 @@
 #include "hsmmc.h"
 #include "pm.h"
 #include "control.h"
+#include "common-board-devices.h"
 
 #define CONFIG_DISABLE_HFCLK 1
 
@@ -59,24 +59,6 @@
 
 #define TWL4030_MSECURE_GPIO 22
 
-/* FIXME: These values need to be updated based on more profiling on 3430sdp*/
-static struct cpuidle_params omap3_cpuidle_params_table[] = {
-	/* C1 */
-	{1, 2, 2, 5},
-	/* C2 */
-	{1, 10, 10, 30},
-	/* C3 */
-	{1, 50, 50, 300},
-	/* C4 */
-	{1, 1500, 1800, 4000},
-	/* C5 */
-	{1, 2500, 7500, 12000},
-	/* C6 */
-	{1, 3000, 8500, 15000},
-	/* C7 */
-	{1, 10000, 30000, 300000},
-};
-
 static uint32_t board_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
 	KEY(0, 1, KEY_RIGHT),
@@ -123,63 +105,14 @@ static struct twl4030_keypad_data sdp3430_kp_data = {
 	.rep		= 1,
 };
 
-static int ts_gpio;	/* Needed for ads7846_get_pendown_state */
-
-/**
- * @brief ads7846_dev_init : Requests & sets GPIO line for pen-irq
- *
- * @return - void. If request gpio fails then Flag KERN_ERR.
- */
-static void ads7846_dev_init(void)
-{
-	if (gpio_request(ts_gpio, "ADS7846 pendown") < 0) {
-		printk(KERN_ERR "can't get ads746 pen down GPIO\n");
-		return;
-	}
-
-	gpio_direction_input(ts_gpio);
-	gpio_set_debounce(ts_gpio, 310);
-}
-
-static int ads7846_get_pendown_state(void)
-{
-	return !gpio_get_value(ts_gpio);
-}
-
-static struct ads7846_platform_data tsc2046_config __initdata = {
-	.get_pendown_state	= ads7846_get_pendown_state,
-	.keep_vref_on		= 1,
-	.wakeup				= true,
-};
-
-
-static struct omap2_mcspi_device_config tsc2046_mcspi_config = {
-	.turbo_mode	= 0,
-	.single_channel	= 1,	/* 0: slave, 1: master */
-};
-
-static struct spi_board_info sdp3430_spi_board_info[] __initdata = {
-	[0] = {
-		/*
-		 * TSC2046 operates at a max freqency of 2MHz, so
-		 * operate slightly below at 1.5MHz
-		 */
-		.modalias		= "ads7846",
-		.bus_num		= 1,
-		.chip_select		= 0,
-		.max_speed_hz		= 1500000,
-		.controller_data	= &tsc2046_mcspi_config,
-		.irq			= 0,
-		.platform_data		= &tsc2046_config,
-	},
-};
-
-
 #define SDP3430_LCD_PANEL_BACKLIGHT_GPIO	8
 #define SDP3430_LCD_PANEL_ENABLE_GPIO		5
 
-static unsigned backlight_gpio;
-static unsigned enable_gpio;
+static struct gpio sdp3430_dss_gpios[] __initdata = {
+	{SDP3430_LCD_PANEL_ENABLE_GPIO,    GPIOF_OUT_INIT_LOW, "LCD reset"    },
+	{SDP3430_LCD_PANEL_BACKLIGHT_GPIO, GPIOF_OUT_INIT_LOW, "LCD Backlight"},
+};
+
 static int lcd_enabled;
 static int dvi_enabled;
 
@@ -187,29 +120,11 @@ static void __init sdp3430_display_init(void)
 {
 	int r;
 
-	enable_gpio    = SDP3430_LCD_PANEL_ENABLE_GPIO;
-	backlight_gpio = SDP3430_LCD_PANEL_BACKLIGHT_GPIO;
-
-	r = gpio_request(enable_gpio, "LCD reset");
-	if (r) {
-		printk(KERN_ERR "failed to get LCD reset GPIO\n");
-		goto err0;
-	}
-
-	r = gpio_request(backlight_gpio, "LCD Backlight");
-	if (r) {
-		printk(KERN_ERR "failed to get LCD backlight GPIO\n");
-		goto err1;
-	}
-
-	gpio_direction_output(enable_gpio, 0);
-	gpio_direction_output(backlight_gpio, 0);
+	r = gpio_request_array(sdp3430_dss_gpios,
+			       ARRAY_SIZE(sdp3430_dss_gpios));
+	if (r)
+		printk(KERN_ERR "failed to get LCD control GPIOs\n");
 
-	return;
-err1:
-	gpio_free(enable_gpio);
-err0:
-	return;
 }
 
 static int sdp3430_panel_enable_lcd(struct omap_dss_device *dssdev)
@@ -219,8 +134,8 @@ static int sdp3430_panel_enable_lcd(struct omap_dss_device *dssdev)
 		return -EINVAL;
 	}
 
-	gpio_direction_output(enable_gpio, 1);
-	gpio_direction_output(backlight_gpio, 1);
+	gpio_direction_output(SDP3430_LCD_PANEL_ENABLE_GPIO, 1);
+	gpio_direction_output(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, 1);
 
 	lcd_enabled = 1;
 
@@ -231,8 +146,8 @@ static void sdp3430_panel_disable_lcd(struct omap_dss_device *dssdev)
 {
 	lcd_enabled = 0;
 
-	gpio_direction_output(enable_gpio, 0);
-	gpio_direction_output(backlight_gpio, 0);
+	gpio_direction_output(SDP3430_LCD_PANEL_ENABLE_GPIO, 0);
+	gpio_direction_output(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, 0);
 }
 
 static int sdp3430_panel_enable_dvi(struct omap_dss_device *dssdev)
@@ -360,12 +275,10 @@ static int sdp3430_twl_gpio_setup(struct device *dev,
 	omap2_hsmmc_init(mmc);
 
 	/* gpio + 7 is "sub_lcd_en_bkl" (output/PWM1) */
-	gpio_request(gpio + 7, "sub_lcd_en_bkl");
-	gpio_direction_output(gpio + 7, 0);
+	gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "sub_lcd_en_bkl");
 
 	/* gpio + 15 is "sub_lcd_nRST" (output) */
-	gpio_request(gpio + 15, "sub_lcd_nRST");
-	gpio_direction_output(gpio + 15, 0);
+	gpio_request_one(gpio + 15, GPIOF_OUT_INIT_LOW, "sub_lcd_nRST");
 
 	return 0;
 }
@@ -580,20 +493,10 @@ static struct twl4030_platform_data sdp3430_twldata = {
 	.vpll2		= &sdp3430_vpll2,
 };
 
-static struct i2c_board_info __initdata sdp3430_i2c_boardinfo[] = {
-	{
-		I2C_BOARD_INFO("twl4030", 0x48),
-		.flags = I2C_CLIENT_WAKE,
-		.irq = INT_34XX_SYS_NIRQ,
-		.platform_data = &sdp3430_twldata,
-	},
-};
-
 static int __init omap3430_i2c_init(void)
 {
 	/* i2c1 for PMIC only */
-	omap_register_i2c_bus(1, 2600, sdp3430_i2c_boardinfo,
-			ARRAY_SIZE(sdp3430_i2c_boardinfo));
+	omap3_pmic_init("twl4030", &sdp3430_twldata);
 	/* i2c2 on camera connector (for sensor control) and optional isp1301 */
 	omap_register_i2c_bus(2, 400, NULL, 0);
 	/* i2c3 on display connector (for DVI, tfp410) */
@@ -872,30 +775,22 @@ static struct flash_partitions sdp_flash_partitions[] = {
 	},
 };
 
-static struct omap_musb_board_data musb_board_data = {
-	.interface_type		= MUSB_INTERFACE_ULPI,
-	.mode			= MUSB_OTG,
-	.power			= 100,
-};
-
 static void __init omap_3430sdp_init(void)
 {
+	int gpio_pendown;
+
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap_board_config = sdp3430_config;
 	omap_board_config_size = ARRAY_SIZE(sdp3430_config);
-	omap3_pm_init_cpuidle(omap3_cpuidle_params_table);
 	omap3430_i2c_init();
 	omap_display_init(&sdp3430_dss_data);
 	if (omap_rev() > OMAP3430_REV_ES1_0)
-		ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV2;
+		gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV2;
 	else
-		ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV1;
-	sdp3430_spi_board_info[0].irq = gpio_to_irq(ts_gpio);
-	spi_register_board_info(sdp3430_spi_board_info,
-				ARRAY_SIZE(sdp3430_spi_board_info));
-	ads7846_dev_init();
+		gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV1;
+	omap_ads7846_init(1, gpio_pendown, 310, NULL);
 	board_serial_init();
-	usb_musb_init(&musb_board_data);
+	usb_musb_init(NULL);
 	board_smc91x_init();
 	board_flash_init(sdp_flash_partitions, chip_sel_3430, 0);
 	sdp3430_display_init();
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 93edd7fcf45..73fa90bb695 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -42,6 +42,7 @@
 #include "hsmmc.h"
 #include "timer-gp.h"
 #include "control.h"
+#include "common-board-devices.h"
 
 #define ETH_KS8851_IRQ			34
 #define ETH_KS8851_POWER_ON		48
@@ -251,58 +252,22 @@ static struct spi_board_info sdp4430_spi_board_info[] __initdata = {
 	},
 };
 
+static struct gpio sdp4430_eth_gpios[] __initdata = {
+	{ ETH_KS8851_POWER_ON,	GPIOF_OUT_INIT_HIGH,	"eth_power"	},
+	{ ETH_KS8851_QUART,	GPIOF_OUT_INIT_HIGH,	"quart"		},
+	{ ETH_KS8851_IRQ,	GPIOF_IN,		"eth_irq"	},
+};
+
 static int omap_ethernet_init(void)
 {
 	int status;
 
 	/* Request of GPIO lines */
+	status = gpio_request_array(sdp4430_eth_gpios,
+				    ARRAY_SIZE(sdp4430_eth_gpios));
+	if (status)
+		pr_err("Cannot request ETH GPIOs\n");
 
-	status = gpio_request(ETH_KS8851_POWER_ON, "eth_power");
-	if (status) {
-		pr_err("Cannot request GPIO %d\n", ETH_KS8851_POWER_ON);
-		return status;
-	}
-
-	status = gpio_request(ETH_KS8851_QUART, "quart");
-	if (status) {
-		pr_err("Cannot request GPIO %d\n", ETH_KS8851_QUART);
-		goto error1;
-	}
-
-	status = gpio_request(ETH_KS8851_IRQ, "eth_irq");
-	if (status) {
-		pr_err("Cannot request GPIO %d\n", ETH_KS8851_IRQ);
-		goto error2;
-	}
-
-	/* Configuration of requested GPIO lines */
-
-	status = gpio_direction_output(ETH_KS8851_POWER_ON, 1);
-	if (status) {
-		pr_err("Cannot set output GPIO %d\n", ETH_KS8851_IRQ);
-		goto error3;
-	}
-
-	status = gpio_direction_output(ETH_KS8851_QUART, 1);
-	if (status) {
-		pr_err("Cannot set output GPIO %d\n", ETH_KS8851_QUART);
-		goto error3;
-	}
-
-	status = gpio_direction_input(ETH_KS8851_IRQ);
-	if (status) {
-		pr_err("Cannot set input GPIO %d\n", ETH_KS8851_IRQ);
-		goto error3;
-	}
-
-	return 0;
-
-error3:
-	gpio_free(ETH_KS8851_IRQ);
-error2:
-	gpio_free(ETH_KS8851_QUART);
-error1:
-	gpio_free(ETH_KS8851_POWER_ON);
 	return status;
 }
 
@@ -575,14 +540,6 @@ static struct twl4030_platform_data sdp4430_twldata = {
 	.usb		= &omap4_usbphy_data
 };
 
-static struct i2c_board_info __initdata sdp4430_i2c_boardinfo[] = {
-	{
-		I2C_BOARD_INFO("twl6030", 0x48),
-		.flags = I2C_CLIENT_WAKE,
-		.irq = OMAP44XX_IRQ_SYS_1N,
-		.platform_data = &sdp4430_twldata,
-	},
-};
 static struct i2c_board_info __initdata sdp4430_i2c_3_boardinfo[] = {
 	{
 		I2C_BOARD_INFO("tmp105", 0x48),
@@ -598,12 +555,7 @@ static struct i2c_board_info __initdata sdp4430_i2c_4_boardinfo[] = {
 };
 static int __init omap4_i2c_init(void)
 {
-	/*
-	 * Phoenix Audio IC needs I2C1 to
-	 * start with 400 KHz or less
-	 */
-	omap_register_i2c_bus(1, 400, sdp4430_i2c_boardinfo,
-			ARRAY_SIZE(sdp4430_i2c_boardinfo));
+	omap4_pmic_init("twl6030", &sdp4430_twldata);
 	omap_register_i2c_bus(2, 400, NULL, 0);
 	omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo,
 				ARRAY_SIZE(sdp4430_i2c_3_boardinfo));
@@ -614,21 +566,13 @@ static int __init omap4_i2c_init(void)
 
 static void __init omap_sfh7741prox_init(void)
 {
-	int  error;
+	int error;
 
-	error