Merge tag 'driver-core-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg Kroah-Hartman:
 "Here's the driver core, and other driver subsystems, pull request for
  the 3.5-rc1 merge window.

  Outside of a few minor driver core changes, we ended up with the
  following different subsystem and core changes as well, due to
  interdependancies on the driver core:
   - hyperv driver updates
   - drivers/memory being created and some drivers moved into it
   - extcon driver subsystem created out of the old Android staging
     switch driver code
   - dynamic debug updates
   - printk rework, and /dev/kmsg changes

  All of this has been tested in the linux-next releases for a few weeks
  with no reported problems.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fix up conflicts in drivers/extcon/extcon-max8997.c where git noticed
that a patch to the deleted drivers/misc/max8997-muic.c driver needs to
be applied to this one.

* tag 'driver-core-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (90 commits)
  uio_pdrv_genirq: get irq through platform resource if not set otherwise
  memory: tegra{20,30}-mc: Remove empty *_remove()
  printk() - isolate KERN_CONT users from ordinary complete lines
  sysfs: get rid of some lockdep false positives
  Drivers: hv: util: Properly handle version negotiations.
  Drivers: hv: Get rid of an unnecessary check in vmbus_prep_negotiate_resp()
  memory: tegra{20,30}-mc: Use dev_err_ratelimited()
  driver core: Add dev_*_ratelimited() family
  Driver Core: don't oops with unregistered driver in driver_find_device()
  printk() - restore prefix/timestamp printing for multi-newline strings
  printk: add stub for prepend_timestamp()
  ARM: tegra30: Make MC optional in Kconfig
  ARM: tegra20: Make MC optional in Kconfig
  ARM: tegra30: MC: Remove unnecessary BUG*()
  ARM: tegra20: MC: Remove unnecessary BUG*()
  printk: correctly align __log_buf
  ARM: tegra30: Add Tegra Memory Controller(MC) driver
  ARM: tegra20: Add Tegra Memory Controller(MC) driver
  printk() - restore timestamp printing at console output
  printk() - do not merge continuation lines of different threads
  ...

79 files changed, 6981 insertions, 1310 deletions

diff --git a/Documentation/ABI/testing/dev-kmsg b/Documentation/ABI/testing/dev-kmsg
new file mode 100644
index 00000000000..281ecc5f970
--- /dev/null
+++ b/Documentation/ABI/testing/dev-kmsg
@@ -0,0 +1,90 @@
+What:		/dev/kmsg
+Date:		Mai 2012
+KernelVersion:	3.5
+Contact:	Kay Sievers <kay@vrfy.org>
+Description:	The /dev/kmsg character device node provides userspace access
+		to the kernel's printk buffer.
+
+		Injecting messages:
+		Every write() to the opened device node places a log entry in
+		the kernel's printk buffer.
+
+		The logged line can be prefixed with a <N> syslog prefix, which
+		carries the syslog priority and facility. The single decimal
+		prefix number is composed of the 3 lowest bits being the syslog
+		priority and the higher bits the syslog facility number.
+
+		If no prefix is given, the priority number is the default kernel
+		log priority and the facility number is set to LOG_USER (1). It
+		is not possible to inject messages from userspace with the
+		facility number LOG_KERN (0), to make sure that the origin of
+		the messages can always be reliably determined.
+
+		Accessing the buffer:
+		Every read() from the opened device node receives one record
+		of the kernel's printk buffer.
+
+		The first read() directly following an open() always returns
+		first message in the buffer; there is no kernel-internal
+		persistent state; many readers can concurrently open the device
+		and read from it, without affecting other readers.
+
+		Every read() will receive the next available record. If no more
+		records are available read() will block, or if O_NONBLOCK is
+		used -EAGAIN returned.
+
+		Messages in the record ring buffer get overwritten as whole,
+		there are never partial messages received by read().
+
+		In case messages get overwritten in the circular buffer while
+		the device is kept open, the next read() will return -EPIPE,
+		and the seek position be updated to the next available record.
+		Subsequent reads() will return available records again.
+
+		Unlike the classic syslog() interface, the 64 bit record
+		sequence numbers allow to calculate the amount of lost
+		messages, in case the buffer gets overwritten. And they allow
+		to reconnect to the buffer and reconstruct the read position
+		if needed, without limiting the interface to a single reader.
+
+		The device supports seek with the following parameters:
+		SEEK_SET, 0
+		  seek to the first entry in the buffer
+		SEEK_END, 0
+		  seek after the last entry in the buffer
+		SEEK_DATA, 0
+		  seek after the last record available at the time
+		  the last SYSLOG_ACTION_CLEAR was issued.
+
+		The output format consists of a prefix carrying the syslog
+		prefix including priority and facility, the 64 bit message
+		sequence number and the monotonic timestamp in microseconds.
+		The values are separated by a ','. Future extensions might
+		add more comma separated values before the terminating ';'.
+		Unknown values should be gracefully ignored.
+
+		The human readable text string starts directly after the ';'
+		and is terminated by a '\n'. Untrusted values derived from
+		hardware or other facilities are printed, therefore
+		all non-printable characters in the log message are escaped
+		by "\x00" C-style hex encoding.
+
+		A line starting with ' ', is a continuation line, adding
+		key/value pairs to the log message, which provide the machine
+		readable context of the message, for reliable processing in
+		userspace.
+
+		Example:
+		7,160,424069;pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
+		 SUBSYSTEM=acpi
+		 DEVICE=+acpi:PNP0A03:00
+		6,339,5140900;NET: Registered protocol family 10
+		30,340,5690716;udevd[80]: starting version 181
+
+		The DEVICE= key uniquely identifies devices the following way:
+		  b12:8        - block dev_t
+		  c127:3       - char dev_t
+		  n8           - netdev ifindex
+		  +sound:card0 - subsystem:devname
+
+Users:		dmesg(1), userspace kernel log consumers
diff --git a/Documentation/ABI/testing/sysfs-class-extcon b/Documentation/ABI/testing/sysfs-class-extcon
new file mode 100644
index 00000000000..20ab361bd8c
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-extcon
@@ -0,0 +1,97 @@
+What:		/sys/class/extcon/.../
+Date:		February 2012
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		Provide a place in sysfs for the extcon objects.
+		This allows accessing extcon specific variables.
+		The name of extcon object denoted as ... is the name given
+		with extcon_dev_register.
+
+		One extcon device denotes a single external connector
+		port. An external connector may have multiple cables
+		attached simultaneously. Many of docks, cradles, and
+		accessory cables have such capability. For example,
+		the 30-pin port of Nuri board (/arch/arm/mach-exynos)
+		may have both HDMI and Charger attached, or analog audio,
+		video, and USB cables attached simulteneously.
+
+		If there are cables mutually exclusive with each other,
+		such binary relations may be expressed with extcon_dev's
+		mutually_exclusive array.
+
+What:		/sys/class/extcon/.../name
+Date:		February 2012
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		The /sys/class/extcon/.../name shows the name of the extcon
+		object. If the extcon object has an optional callback
+		"show_name" defined, the callback will provide the name with
+		this sysfs node.
+
+What:		/sys/class/extcon/.../state
+Date:		February 2012
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		The /sys/class/extcon/.../state shows and stores the cable
+		attach/detach information of the corresponding extcon object.
+		If the extcon object has an optional callback "show_state"
+		defined, the showing function is overriden with the optional
+		callback.
+
+		If the default callback for showing function is used, the
+		format is like this:
+		# cat state
+		USB_OTG=1
+		HDMI=0
+		TA=1
+		EAR_JACK=0
+		#
+		In this example, the extcon device have USB_OTG and TA
+		cables attached and HDMI and EAR_JACK cables detached.
+
+		In order to update the state of an extcon device, enter a hex
+		state number starting with 0x.
+		 echo 0xHEX > state
+
+		This updates the whole state of the extcon dev.
+		Inputs of all the methods are required to meet the
+		mutually_exclusive contidions if they exist.
+
+		It is recommended to use this "global" state interface if
+		you need to enter the value atomically. The later state
+		interface associated with each cable cannot update
+		multiple cable states of an extcon device simultaneously.
+
+What:		/sys/class/extcon/.../cable.x/name
+Date:		February 2012
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		The /sys/class/extcon/.../cable.x/name shows the name of cable
+		"x" (integer between 0 and 31) of an extcon device.
+
+What:		/sys/class/extcon/.../cable.x/state
+Date:		February 2012
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		The /sys/class/extcon/.../cable.x/name shows and stores the
+		state of cable "x" (integer between 0 and 31) of an extcon
+		device. The state value is either 0 (detached) or 1
+		(attached).
+
+What:		/sys/class/extcon/.../mutually_exclusive/...
+Date:		December 2011
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		Shows the relations of mutually exclusiveness. For example,
+		if the mutually_exclusive array of extcon_dev is
+		{0x3, 0x5, 0xC, 0x0}, the, the output is:
+		# ls mutually_exclusive/
+		0x3
+		0x5
+		0xc
+		#
+
+		Note that mutually_exclusive is a sub-directory of the extcon
+		device and the file names under the mutually_exclusive
+		directory show the mutually-exclusive sets, not the contents
+		of the files.
diff --git a/Documentation/HOWTO b/Documentation/HOWTO
index f7ade3b3b40..59c080f084e 100644
--- a/Documentation/HOWTO
+++ b/Documentation/HOWTO
@@ -218,16 +218,16 @@ The development process
 Linux kernel development process currently consists of a few different
 main kernel "branches" and lots of different subsystem-specific kernel
 branches.  These different branches are:
-  - main 2.6.x kernel tree
-  - 2.6.x.y -stable kernel tree
-  - 2.6.x -git kernel patches
+  - main 3.x kernel tree
+  - 3.x.y -stable kernel tree
+  - 3.x -git kernel patches
   - subsystem specific kernel trees and patches
-  - the 2.6.x -next kernel tree for integration tests
+  - the 3.x -next kernel tree for integration tests
 
-2.6.x kernel tree
+3.x kernel tree
 -----------------
-2.6.x kernels are maintained by Linus Torvalds, and can be found on
-kernel.org in the pub/linux/kernel/v2.6/ directory.  Its development
+3.x kernels are maintained by Linus Torvalds, and can be found on
+kernel.org in the pub/linux/kernel/v3.x/ directory.  Its development
 process is as follows:
   - As soon as a new kernel is released a two weeks window is open,
     during this period of time maintainers can submit big diffs to
@@ -262,20 +262,20 @@ mailing list about kernel releases:
 	released according to perceived bug status, not according to a
 	preconceived timeline."
 
-2.6.x.y -stable kernel tree
+3.x.y -stable kernel tree
 ---------------------------
-Kernels with 4-part versions are -stable kernels. They contain
+Kernels with 3-part versions are -stable kernels. They contain
 relatively small and critical fixes for security problems or significant
-regressions discovered in a given 2.6.x kernel.
+regressions discovered in a given 3.x kernel.
 
 This is the recommended branch for users who want the most recent stable
 kernel and are not interested in helping test development/experimental
 versions.
 
-If no 2.6.x.y kernel is available, then the highest numbered 2.6.x
+If no 3.x.y kernel is available, then the highest numbered 3.x
 kernel is the current stable kernel.
 
-2.6.x.y are maintained by the "stable" team <stable@vger.kernel.org>, and
+3.x.y are maintained by the "stable" team <stable@vger.kernel.org>, and
 are released as needs dictate.  The normal release period is approximately
 two weeks, but it can be longer if there are no pressing problems.  A
 security-related problem, instead, can cause a release to happen almost
@@ -285,7 +285,7 @@ The file Documentation/stable_kernel_rules.txt in the kernel tree
 documents what kinds of changes are acceptable for the -stable tree, and
 how the release process works.
 
-2.6.x -git patches
+3.x -git patches
 ------------------
 These are daily snapshots of Linus' kernel tree which are managed in a
 git repository (hence the name.) These patches are usually released
@@ -317,13 +317,13 @@ revisions to it, and maintainers can mark patches as under review,
 accepted, or rejected.  Most of these patchwork sites are listed at
 http://patchwork.kernel.org/.
 
-2.6.x -next kernel tree for integration tests
+3.x -next kernel tree for integration tests
 ---------------------------------------------
-Before updates from subsystem trees are merged into the mainline 2.6.x
+Before updates from subsystem trees are merged into the mainline 3.x
 tree, they need to be integration-tested.  For this purpose, a special
 testing repository exists into which virtually all subsystem trees are
 pulled on an almost daily basis:
-	http://git.kernel.org/?p=linux/kernel/git/sfr/linux-next.git
+	http://git.kernel.org/?p=linux/kernel/git/next/linux-next.git
 	http://linux.f-seidel.de/linux-next/pmwiki/
 
 This way, the -next kernel gives a summary outlook onto what will be
diff --git a/Documentation/devices.txt b/Documentation/devices.txt
index 00383186d8f..5941f5136c6 100644
--- a/Documentation/devices.txt
+++ b/Documentation/devices.txt
@@ -98,7 +98,8 @@ Your cooperation is appreciated.
 		  8 = /dev/random	Nondeterministic random number gen.
 		  9 = /dev/urandom	Faster, less secure random number gen.
 		 10 = /dev/aio		Asynchronous I/O notification interface
-		 11 = /dev/kmsg		Writes to this come out as printk's
+		 11 = /dev/kmsg		Writes to this come out as printk's, reads
+					export the buffered printk records.
 		 12 = /dev/oldmem	Used by crashdump kernels to access
 					the memory of the kernel that crashed.
 
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-mc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-mc.txt
new file mode 100644
index 00000000000..c25a0a55151
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-mc.txt
@@ -0,0 +1,16 @@
+NVIDIA Tegra20 MC(Memory Controller)
+
+Required properties:
+- compatible : "nvidia,tegra20-mc"
+- reg : Should contain 2 register ranges(address and length); see the
+  example below. Note that the MC registers are interleaved with the
+  GART registers, and hence must be represented as multiple ranges.
+- interrupts : Should contain MC General interrupt.
+
+Example:
+	mc {
+		compatible = "nvidia,tegra20-mc";
+		reg = <0x7000f000 0x024
+		       0x7000f03c 0x3c4>;
+		interrupts = <0 77 0x04>;
+	};
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-mc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-mc.txt
new file mode 100644
index 00000000000..e47e73f612f
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-mc.txt
@@ -0,0 +1,18 @@
+NVIDIA Tegra30 MC(Memory Controller)
+
+Required properties:
+- compatible : "nvidia,tegra30-mc"
+- reg : Should contain 4 register ranges(address and length); see the
+  example below. Note that the MC registers are interleaved with the
+  SMMU registers, and hence must be represented as multiple ranges.
+- interrupts : Should contain MC General interrupt.
+
+Example:
+	mc {
+		compatible = "nvidia,tegra30-mc";
+		reg = <0x7000f000 0x010
+		       0x7000f03c 0x1b4
+		       0x7000f200 0x028
+		       0x7000f284 0x17c>;
+		interrupts = <0 77 0x04>;
+	};
diff --git a/Documentation/dynamic-debug-howto.txt b/Documentation/dynamic-debug-howto.txt
index 74e6c778267..6e1684981da 100644
--- a/Documentation/dynamic-debug-howto.txt
+++ b/Documentation/dynamic-debug-howto.txt
@@ -2,17 +2,17 @@
 Introduction
 ============
 
-This document describes how to use the dynamic debug (ddebug) feature.
+This document describes how to use the dynamic debug (dyndbg) feature.
 
-Dynamic debug is designed to allow you to dynamically enable/disable kernel
-code to obtain additional kernel information. Currently, if
-CONFIG_DYNAMIC_DEBUG is set, then all pr_debug()/dev_dbg() calls can be
-dynamically enabled per-callsite.
+Dynamic debug is designed to allow you to dynamically enable/disable
+kernel code to obtain additional kernel information.  Currently, if
+CONFIG_DYNAMIC_DEBUG is set, then all pr_debug()/dev_dbg() calls can
+be dynamically enabled per-callsite.
 
 Dynamic debug has even more useful features:
 
- * Simple query language allows turning on and off debugging statements by
-   matching any combination of 0 or 1 of:
+ * Simple query language allows turning on and off debugging
+   statements by matching any combination of 0 or 1 of:
 
    - source filename
    - function name
@@ -20,17 +20,19 @@ Dynamic debug has even more