Merge branch 'topic/misc' into for-linus

56 files changed, 991 insertions, 612 deletions

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 2b2407d9a6d..0413f375c7b 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -280,19 +280,12 @@ and is between 256 and 4096 characters. It is defined in the file
 			no: ACPI OperationRegions are not marked as reserved,
 			no further checks are performed.
 
-	ad1848=		[HW,OSS]
-			Format: <io>,<irq>,<dma>,<dma2>,<type>
-
 	add_efi_memmap	[EFI; X86] Include EFI memory map in
 			kernel's map of available physical RAM.
 
 	advansys=	[HW,SCSI]
 			See header of drivers/scsi/advansys.c.
 
-	aedsp16=	[HW,OSS] Audio Excel DSP 16
-			Format: <io>,<irq>,<dma>,<mss_io>,<mpu_io>,<mpu_irq>
-			See also header of sound/oss/aedsp16.c.
-
 	agp=		[AGP]
 			{ off | try_unsupported }
 			off: disable AGP support
@@ -311,6 +304,9 @@ and is between 256 and 4096 characters. It is defined in the file
 	aic79xx=	[HW,SCSI]
 			See Documentation/scsi/aic79xx.txt.
 
+	ALSA		[HW,ALSA]
+			See Documentation/sound/alsa/alsa-parameters.txt
+
 	alignment=	[KNL,ARM]
 			Allow the default userspace alignment fault handler
 			behaviour to be specified.  Bit 0 enables warnings,
@@ -655,8 +651,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			Disable PIN 1 of APIC timer
 			Can be useful to work around chipset bugs.
 
-	dmasound=	[HW,OSS] Sound subsystem buffers
-
 	dma_debug=off	If the kernel is compiled with DMA_API_DEBUG support,
 			this option disables the debugging code at boot.
 
@@ -1523,9 +1517,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			that the amount of memory usable for all allocations
 			is not too small.
 
-	mpu401=		[HW,OSS]
-			Format: <io>,<irq>
-
 	MTD_Partition=	[MTD]
 			Format: <name>,<region-number>,<size>,<offset>
 
@@ -1849,9 +1840,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			For example, to override I2C bus2:
 			omap_mux=i2c2_scl.i2c2_scl=0x100,i2c2_sda.i2c2_sda=0x100
 
-	opl3=		[HW,OSS]
-			Format: <io>
-
 	oprofile.timer=	[HW]
 			Use timer interrupt instead of performance counters
 
@@ -1863,6 +1851,9 @@ and is between 256 and 4096 characters. It is defined in the file
 				perfmon on Intel CPUs instead of the
 				CPU specific event set.
 
+	OSS		[HW,OSS]
+			See Documentation/sound/oss/oss-parameters.txt
+
 	osst=		[HW,SCSI] SCSI Tape Driver
 			Format: <buffer_size>,<write_threshold>
 			See also Documentation/scsi/st.txt.
@@ -1899,9 +1890,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			Currently this function knows 686a and 8231 chips.
 			Format: [spp|ps2|epp|ecp|ecpepp]
 
-	pas2=		[HW,OSS] Format:
-			<io>,<irq>,<dma>,<dma16>,<sb_io>,<sb_irq>,<sb_dma>,<sb_dma16>
-
 	pas16=		[HW,SCSI]
 			See header of drivers/scsi/pas16.c.
 
@@ -2171,10 +2159,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			[HW,MOUSE] Controls Logitech smartscroll autorepeat.
 			0 = disabled, 1 = enabled (default).
 
-	pss=		[HW,OSS] Personal Sound System (ECHO ESC614)
-			Format:
-			<io>,<mss_io>,<mss_irq>,<mss_dma>,<mpu_io>,<mpu_irq>
-
 	pt.		[PARIDE]
 			See Documentation/blockdev/paride.txt.
 
@@ -2383,128 +2367,6 @@ and is between 256 and 4096 characters. It is defined in the file
 				1: Fast pin select (default)
 				2: ATC IRMode
 
-	snd-ad1816a=	[HW,ALSA]
-
-	snd-ad1848=	[HW,ALSA]
-
-	snd-ali5451=	[HW,ALSA]
-
-	snd-als100=	[HW,ALSA]
-
-	snd-als4000=	[HW,ALSA]
-
-	snd-azt2320=	[HW,ALSA]
-
-	snd-cmi8330=	[HW,ALSA]
-
-	snd-cmipci=	[HW,ALSA]
-
-	snd-cs4231=	[HW,ALSA]
-
-	snd-cs4232=	[HW,ALSA]
-
-	snd-cs4236=	[HW,ALSA]
-
-	snd-cs4281=	[HW,ALSA]
-
-	snd-cs46xx=	[HW,ALSA]
-
-	snd-dt019x=	[HW,ALSA]
-
-	snd-dummy=	[HW,ALSA]
-
-	snd-emu10k1=	[HW,ALSA]
-
-	snd-ens1370=	[HW,ALSA]
-
-	snd-ens1371=	[HW,ALSA]
-
-	snd-es968=	[HW,ALSA]
-
-	snd-es1688=	[HW,ALSA]
-
-	snd-es18xx=	[HW,ALSA]
-
-	snd-es1938=	[HW,ALSA]
-
-	snd-es1968=	[HW,ALSA]
-
-	snd-fm801=	[HW,ALSA]
-
-	snd-gusclassic=	[HW,ALSA]
-
-	snd-gusextreme=	[HW,ALSA]
-
-	snd-gusmax=	[HW,ALSA]
-
-	snd-hdsp=	[HW,ALSA]
-
-	snd-ice1712=	[HW,ALSA]
-
-	snd-intel8x0=	[HW,ALSA]
-
-	snd-interwave=	[HW,ALSA]
-
-	snd-interwave-stb=
-			[HW,ALSA]
-
-	snd-korg1212=	[HW,ALSA]
-
-	snd-maestro3=	[HW,ALSA]
-
-	snd-mpu401=	[HW,ALSA]
-
-	snd-mtpav=	[HW,ALSA]
-
-	snd-nm256=	[HW,ALSA]
-
-	snd-opl3sa2=	[HW,ALSA]
-
-	snd-opti92x-ad1848=
-			[HW,ALSA]
-
-	snd-opti92x-cs4231=
-			[HW,ALSA]
-
-	snd-opti93x=	[HW,ALSA]
-
-	snd-pmac=	[HW,ALSA]
-
-	snd-rme32=	[HW,ALSA]
-
-	snd-rme96=	[HW,ALSA]
-
-	snd-rme9652=	[HW,ALSA]
-
-	snd-sb8=	[HW,ALSA]
-
-	snd-sb16=	[HW,ALSA]
-
-	snd-sbawe=	[HW,ALSA]
-
-	snd-serial=	[HW,ALSA]
-
-	snd-sgalaxy=	[HW,ALSA]
-
-	snd-sonicvibes=	[HW,ALSA]
-
-	snd-sun-amd7930=
-			[HW,ALSA]
-
-	snd-sun-cs4231=	[HW,ALSA]
-
-	snd-trident=	[HW,ALSA]
-
-	snd-usb-audio=	[HW,ALSA,USB]
-
-	snd-via82xx=	[HW,ALSA]
-
-	snd-virmidi=	[HW,ALSA]
-
-	snd-wavefront=	[HW,ALSA]
-
-	snd-ymfpci=	[HW,ALSA]
-
 	softlockup_panic=
 			[KNL] Should the soft-lockup detector generate panics.
 
@@ -2519,9 +2381,6 @@ and is between 256 and 4096 characters. It is defined in the file
 	spia_pedr=
 	spia_peddr=
 
-	sscape=		[HW,OSS]
-			Format: <io>,<irq>,<dma>,<mpu_io>,<mpu_irq>
-
 	st=		[HW,SCSI] SCSI tape parameters (buffers, etc.)
 			See Documentation/scsi/st.txt.
 
@@ -2661,10 +2520,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			to facilitate early boot debugging.
 			See also Documentation/trace/events.txt
 
-	trix=		[HW,OSS] MediaTrix AudioTrix Pro
-			Format:
-			<io>,<irq>,<dma>,<dma2>,<sb_io>,<sb_irq>,<sb_dma>,<mpu_io>,<mpu_irq>
-
 	tsc=		Disable clocksource-must-verify flag for TSC.
 			Format: <string>
 			[x86] reliable: mark tsc clocksource as reliable, this
@@ -2681,12 +2536,6 @@ and is between 256 and 4096 characters. It is defined in the file
 	u14-34f=	[HW,SCSI] UltraStor 14F/34F SCSI host adapter
 			See header of drivers/scsi/u14-34f.c.
 
-	uart401=	[HW,OSS]
-			Format: <io>,<irq>
-
-	uart6850=	[HW,OSS]
-			Format: <io>,<irq>
-
 	uhash_entries=	[KNL,NET]
 			Set number of hash buckets for UDP/UDP-Lite connections
 
@@ -2852,9 +2701,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			overridden by individual drivers. 0 will hide
 			cursors, 1 will display them.
 
-	waveartist=	[HW,OSS]
-			Format: <io>,<irq>,<dma>,<dma2>
-
 	wd33c93=	[HW,SCSI]
 			See header of drivers/scsi/wd33c93.c.
 
@@ -2887,5 +2733,4 @@ ______________________________________________________________________
 
 TODO:
 
-	Add documentation for ALSA options.
 	Add more DRM drivers.
diff --git a/Documentation/sound/alsa/Procfile.txt b/Documentation/sound/alsa/Procfile.txt
index 07301de12cc..7fcd1ad96fc 100644
--- a/Documentation/sound/alsa/Procfile.txt
+++ b/Documentation/sound/alsa/Procfile.txt
@@ -103,6 +103,8 @@ card*/pcm*/xrun_debug
 	  bit 2 = Enable additional jiffies check
 	  bit 3 = Log hwptr update at each period interrupt
 	  bit 4 = Log hwptr update at each snd_pcm_update_hw_ptr()
+	  bit 5 = Show last 10 positions on error
+	  bit 6 = Do above only once
 
 	When the bit 0 is set, the driver will show the messages to
 	kernel log when an xrun is detected.  The debug message is
@@ -122,6 +124,12 @@ card*/pcm*/xrun_debug
 	Bits 3 and 4 are for logging the hwptr records.  Note that
 	these will give flood of kernel messages.
 
+	When bit 5 is set, the driver logs the last 10 xrun errors and
+	the proc file shows each jiffies, position, period_size,
+	buffer_size, old_hw_ptr, and hw_ptr_base values.
+
+	When bit 6 is set, the full xrun log is shown only once.
+
 card*/pcm*/sub*/info
 	The general information of this PCM sub-stream.
 
diff --git a/Documentation/sound/alsa/alsa-parameters.txt b/Documentation/sound/alsa/alsa-parameters.txt
new file mode 100644
index 00000000000..0fa40679b08
--- /dev/null
+++ b/Documentation/sound/alsa/alsa-parameters.txt
@@ -0,0 +1,135 @@
+                          ALSA Kernel Parameters
+                          ~~~~~~~~~~~~~~~~~~~~~~
+
+See Documentation/kernel-parameters.txt for general information on
+specifying module parameters.
+
+This document may not be entirely up to date and comprehensive. The command
+"modinfo -p ${modulename}" shows a current list of all parameters of a loadable
+module. Loadable modules, after being loaded into the running kernel, also
+reveal their parameters in /sys/module/${modulename}/parameters/. Some of these
+parameters may be changed at runtime by the command
+"echo -n ${value} > /sys/module/${modulename}/parameters/${parm}".
+
+
+	snd-ad1816a=	[HW,ALSA]
+
+	snd-ad1848=	[HW,ALSA]
+
+	snd-ali5451=	[HW,ALSA]
+
+	snd-als100=	[HW,ALSA]
+
+	snd-als4000=	[HW,ALSA]
+
+	snd-azt2320=	[HW,ALSA]
+
+	snd-cmi8330=	[HW,ALSA]
+
+	snd-cmipci=	[HW,ALSA]
+
+	snd-cs4231=	[HW,ALSA]
+
+	snd-cs4232=	[HW,ALSA]
+
+	snd-cs4236=	[HW,ALSA]
+
+	snd-cs4281=	[HW,ALSA]
+
+	snd-cs46xx=	[HW,ALSA]
+
+	snd-dt019x=	[HW,ALSA]
+
+	snd-dummy=	[HW,ALSA]
+
+	snd-emu10k1=	[HW,ALSA]
+
+	snd-ens1370=	[HW,ALSA]
+
+	snd-ens1371=	[HW,ALSA]
+
+	snd-es968=	[HW,ALSA]
+
+	snd-es1688=	[HW,ALSA]
+
+	snd-es18xx=	[HW,ALSA]
+
+	snd-es1938=	[HW,ALSA]
+
+	snd-es1968=	[HW,ALSA]
+
+	snd-fm801=	[HW,ALSA]
+
+	snd-gusclassic=	[HW,ALSA]
+
+	snd-gusextreme=	[HW,ALSA]
+
+	snd-gusmax=	[HW,ALSA]
+
+	snd-hdsp=	[HW,ALSA]
+
+	snd-ice1712=	[HW,ALSA]
+
+	snd-intel8x0=	[HW,ALSA]
+
+	snd-interwave=	[HW,ALSA]
+
+	snd-interwave-stb=
+			[HW,ALSA]
+
+	snd-korg1212=	[HW,ALSA]
+
+	snd-maestro3=	[HW,ALSA]
+
+	snd-mpu401=	[HW,ALSA]
+
+	snd-mtpav=	[HW,ALSA]
+
+	snd-nm256=	[HW,ALSA]
+
+	snd-opl3sa2=	[HW,ALSA]
+
+	snd-opti92x-ad1848=
+			[HW,ALSA]
+
+	snd-opti92x-cs4231=
+			[HW,ALSA]
+
+	snd-opti93x=	[HW,ALSA]
+
+	snd-pmac=	[HW,ALSA]
+
+	snd-rme32=	[HW,ALSA]
+
+	snd-rme96=	[HW,ALSA]
+
+	snd-rme9652=	[HW,ALSA]
+
+	snd-sb8=	[HW,ALSA]
+
+	snd-sb16=	[HW,ALSA]
+
+	snd-sbawe=	[HW,ALSA]
+
+	snd-serial=	[HW,ALSA]
+
+	snd-sgalaxy=	[HW,ALSA]
+
+	snd-sonicvibes=	[HW,ALSA]
+
+	snd-sun-amd7930=
+			[HW,ALSA]
+
+	snd-sun-cs4231=	[HW,ALSA]
+
+	snd-trident=	[HW,ALSA]
+
+	snd-usb-audio=	[HW,ALSA,USB]
+
+	snd-via82xx=	[HW,ALSA]
+
+	snd-virmidi=	[HW,ALSA]
+
+	snd-wavefront=	[HW,ALSA]
+
+	snd-ymfpci=	[HW,ALSA]
diff --git a/Documentation/sound/oss/oss-parameters.txt b/Documentation/sound/oss/oss-parameters.txt
new file mode 100644
index 00000000000..3ab391e7c29
--- /dev/null
+++ b/Documentation/sound/oss/oss-parameters.txt
@@ -0,0 +1,51 @@
+                          OSS Kernel Parameters
+                          ~~~~~~~~~~~~~~~~~~~~~
+
+See Documentation/kernel-parameters.txt for general information on
+specifying module parameters.
+
+This document may not be entirely up to date and comprehensive. The command
+"modinfo -p ${modulename}" shows a current list of all parameters of a loadable
+module. Loadable modules, after being loaded into the running kernel, also
+reveal their parameters in /sys/module/${modulename}/parameters/. Some of these
+parameters may be changed at runtime by the command
+"echo -n ${value} > /sys/module/${modulename}/parameters/${parm}".
+
+
+	ad1848=		[HW,OSS]
+			Format: <io>,<irq>,<dma>,<dma2>,<type>
+
+	aedsp16=	[HW,OSS] Audio Excel DSP 16
+			Format: <io>,<irq>,<dma>,<mss_io>,<mpu_io>,<mpu_irq>
+			See also header of sound/oss/aedsp16.c.
+
+	dmasound=	[HW,OSS] Sound subsystem buffers
+
+	mpu401=		[HW,OSS]
+			Format: <io>,<irq>
+
+	opl3=		[HW,OSS]
+			Format: <io>
+
+	pas2=		[HW,OSS] Format:
+			<io>,<irq>,<dma>,<dma16>,<sb_io>,<sb_irq>,<sb_dma>,<sb_dma16>
+
+	pss=		[HW,OSS] Personal Sound System (ECHO ESC614)
+			Format:
+			<io>,<mss_io>,<mss_irq>,<mss_dma>,<mpu_io>,<mpu_irq>
+
+	sscape=		[HW,OSS]
+			Format: <io>,<irq>,<dma>,<mpu_io>,<mpu_irq>
+
+	trix=		[HW,OSS] MediaTrix AudioTrix Pro
+			Format:
+			<io>,<irq>,<dma>,<dma2>,<sb_io>,<sb_irq>,<sb_dma>,<mpu_io>,<mpu_irq>
+
+	uart401=	[HW,OSS]
+			Format: <io>,<irq>
+
+	uart6850=	[HW,OSS]
+			Format: <io>,<irq>
+
+	waveartist=	[HW,OSS]
+			Format: <io>,<irq>,<dma>,<dma2>
diff --git a/arch/um/drivers/hostaudio_kern.c b/arch/um/drivers/hostaudio_kern.c
index ae42695c359..68142df7660 100644
--- a/arch/um/drivers/hostaudio_kern.c
+++ b/arch/um/drivers/hostaudio_kern.c
@@ -8,6 +8,7 @@
 #include "linux/slab.h"
 #include "linux/sound.h"
 #include "linux/soundcard.h"
+#include "linux/smp_lock.h"
 #include "asm/uaccess.h"
 #include "init.h"
 #include "os.h"
@@ -198,7 +199,10 @@ static int hostaudio_open(struct inode *inode, struct file *file)
 	if (file->f_mode & FMODE_WRITE)
 		w = 1;
 
+	lock_kernel();
 	ret = os_open_file(dsp, of_set_rw(OPENFLAGS(), r, w), 0);
+	unlock_kernel();
+
 	if (ret < 0) {
 		kfree(state);
 		return ret;
@@ -254,7 +258,9 @@ static int hostmixer_open_mixdev(struct inode *inode, struct file *file)
 	if (file->f_mode & FMODE_WRITE)
 		w = 1;
 
+	lock_kernel();
 	ret = os_open_file(mixer, of_set_rw(OPENFLAGS(), r, w), 0);
+	unlock_kernel();
 
 	if (ret < 0) {
 		printk(KERN_ERR "hostaudio_open_mixdev failed to open '%s', "
diff --git a/drivers/usb/gadget/f_audio.c b/drivers/usb/gadget/f_audio.c
index b91115f84b1..1f48ceb55a7 100644
--- a/drivers/usb/gadget/f_audio.c
+++ b/drivers/usb/gadget/f_audio.c
@@ -61,7 +61,7 @@ DECLARE_UAC_AC_HEADER_DESCRIPTOR(2);
 #define UAC_DT_TOTAL_LENGTH (UAC_DT_AC_HEADER_LENGTH + UAC_DT_INPUT_TERMINAL_SIZE \
 	+ UAC_DT_OUTPUT_TERMINAL_SIZE + UAC_DT_FEATURE_UNIT_SIZE(0))
 /* B.3.2  Class-Specific AC Interface Descriptor */
-static struct uac_ac_header_descriptor_v1_2 ac_header_desc = {
+static struct uac1_ac_header_descriptor_2 ac_header_desc = {
 	.bLength =		UAC_DT_AC_HEADER_LENGTH,
 	.bDescriptorType =	USB_DT_CS_INTERFACE,
 	.bDescriptorSubtype =	UAC_HEADER,
@@ -125,7 +125,7 @@ static struct usb_audio_control_selector feature_unit = {
 };
 
 #define OUTPUT_TERMINAL_ID	3
-static struct uac_output_terminal_descriptor_v1 output_terminal_desc = {
+static struct uac1_output_terminal_descriptor output_terminal_desc = {
 	.bLength		= UAC_DT_OUTPUT_TERMINAL_SIZE,
 	.bDescriptorType	= USB_DT_CS_INTERFACE,
 	.bDescriptorSubtype	= UAC_OUTPUT_TERMINAL,
@@ -155,7 +155,7 @@ static struct usb_interface_descriptor as_interface_alt_1_desc = {
 };
 
 /* B.4.2  Class-Specific AS Interface Descriptor */
-static struct uac_as_header_descriptor_v1 as_header_desc = {
+static struct uac1_as_header_descriptor as_header_desc = {
 	.bLength =		UAC_DT_AS_HEADER_SIZE,
 	.bDescriptorType =	USB_DT_CS_INTERFACE,
 	.bDescriptorSubtype =	UAC_AS_GENERAL,
diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c
index 2b56ce62185..b7bf88019b0 100644
--- a/drivers/usb/gadget/gmidi.c
+++ b/drivers/usb/gadget/gmidi.c
@@ -238,7 +238,7 @@ static const struct usb_interface_descriptor ac_interface_desc = {
 };
 
 /* B.3.2  Class-Specific AC Interface Descriptor */
-static const struct uac_ac_header_descriptor_v1_1 ac_header_desc = {
+static const struct uac1_ac_header_descriptor_1 ac_header_desc = {
 	.bLength =		UAC_DT_AC_HEADER_SIZE(1),
 	.bDescriptorType =	USB_DT_CS_INTERFACE,
 	.bDescriptorSubtype =	USB_MS_HEADER,
diff --git a/include/linux/usb/audio-v2.h b/include/linux/usb/audio-v2.h
index 383b94ba8c2..964cb603f7c 100644
--- a/include/linux/usb/audio-v2.h
+++ b/include/linux/usb/audio-v2.h
@@ -18,6 +18,21 @@
 /* v1.0 and v2.0 of this standard have many things in common. For the rest
  * of the definitions, please refer to audio.h */
 
+/*
+ * bmControl field decoders
+ *
+ * From the USB Audio spec v2.0:
+ *
+ *   bmaControls() is a (ch+1)-element array of 4-byte bitmaps,
+ *   each containing a set of bit pairs. If a Control is present,
+ *   it must be Host readable. If a certain Control is not
+ *   present then the bit pair must be set to 0b00.
+ *   If a Control is present but read-only, the bit pair must be
+ *   set to 0b01. If a Control is also Host programmable, the bit
+ *   pair must be set to 0b11. The value 0b10 is not allowed.
+ *
+ */
+
 static inline bool uac2_control_is_readable(u32 bmControls, u8 control)
 {
 	return (bmControls >> (control * 2)) & 0x1;
@@ -121,7 +136,7 @@ struct uac2_feature_unit_descriptor {
 
 /* 4.9.2 Class-Specific AS Interface Descriptor */
 
-struct uac_as_header_descriptor_v2 {
+struct uac2_as_header_descriptor {
 	__u8 bLength;
 	__u8 bDescriptorType;
 	__u8 bDescriptorSubtype;
diff --git a/include/linux/usb/audio.h b/include/linux/usb/audio.h
index c51200c715e..a54b8255d75 100644
--- a/include/linux/usb/audio.h
+++ b/include/linux/usb/audio.h
@@ -39,8 +39,8 @@
 #define UAC_MIXER_UNIT			0x04
 #define UAC_SELECTOR_UNIT		0x05
 #define UAC_FEATURE_UNIT		0x06
-#define UAC_PROCESSING_UNIT_V1		0x07
-#define UAC_EXTENSION_UNIT_V1		0x08
+#define UAC1_PROCESSING_UNIT		0x07
+#define UAC1_EXTENSION_UNIT		0x08
 
 /* A.6 Audio Class-Specific AS Interface Descriptor Subtypes */
 #define UAC_AS_GENERAL			0x01
@@ -151,7 +151,7 @@
 
 /* Terminal Control Selectors */
 /* 4.3.2  Class-Specific AC Interface Descriptor */
-struct uac_ac_header_descriptor_v1 {
+struct uac1_ac_header_descriptor {
 	__u8  bLength;			/* 8 + n */
 	__u8  bDescriptorType;		/* USB_DT_CS_INTERFACE */
 	__u8  bDescriptorSubtype;	/* UAC_MS_HEADER */
@@ -165,7 +165,7 @@ struct uac_ac_header_descriptor_v1 {
 
 /* As above, but more useful for defining your own descriptors: */
 #define DECLARE_UAC_AC_HEADER_DESCRIPTOR(n)			\
-struct uac_ac_header_descriptor_v1_##n {			\
+struct uac1_ac_header_descriptor_##n {			\
 	__u8  bLength;						\
 	__u8  bDescriptorType;					\
 	__u8  bDescriptorSubtype;				\
@@ -205,7 +205,7 @@ struct uac_input_terminal_descriptor {
 #define UAC_TERMINAL_CS_COPY_PROTECT_CONTROL		0x01
 
 /* 4.3.2.2 Output Terminal Descriptor */
-struct uac_output_terminal_descriptor_v1 {
+struct uac1_output_terminal_descriptor {
 	__u8  bLength;			/* in bytes: 9 */
 	__u8  bDescriptorType;		/* CS_INTERFACE descriptor type */
 	__u8  bDescriptorSubtype;	/* OUTPUT_TERMINAL descriptor subtype */
@@ -395,7 +395,7 @@ static inline __u8 *uac_processing_unit_specific(struct uac_processing_unit_desc
 }
 
 /* 4.5.2 Class-Specific AS Interface Descriptor */
-struct uac_as_header_descriptor_v1 {
+struct uac1_as_header_descriptor {
 	__u8  bLength;			/* in bytes: 7 */
 	__u8  bDescriptorType;		/* USB_DT_CS_INTERFACE */
 	__u8  bDescriptorSubtype;	/* AS_GENERAL */
diff --git a/include/sound/asound.h b/include/sound/asound.h
index 9f1eecf99e6..a1803ecea34 100644
--- a/include/sound/asound.h
+++ b/include/sound/asound.h
@@ -212,7 +212,11 @@ typedef int __bitwise snd_pcm_format_t;
 #define	SNDRV_PCM_FORMAT_S18_3BE	((__force snd_pcm_format_t) 41)	/* in three bytes */
 #define	SNDRV_PCM_FORMAT_U18_3LE	((__force snd_pcm_format_t) 42)	/* in three bytes */
 #define	SNDRV_PCM_FORMAT_U18_3BE	((__force snd_pcm_format_t) 43)	/* in three bytes */
-#define	SNDRV_PCM_FORMAT_LAST		SNDRV_PCM_FORMAT_U18_3BE
+#define	SNDRV_PCM_FORMAT_G723_24	((__force snd_pcm_format_t) 44) /* 8 samples in 3 bytes */
+#define	SNDRV_PCM_FORMAT_G723_24_1B	((__force snd_pcm_format_t) 45) /* 1 sample in 1 byte */
+#define	SNDRV_PCM_FORMAT_G723_40	((__force snd_pcm_format_t) 46) /* 8 Samples in 5 bytes */
+#define	SNDRV_PCM_FORMAT_G723_40_1B	((__force snd_pcm_format_t) 47) /* 1 sample in 1 byte */
+#define	SNDRV_PCM_FORMAT_LAST		SNDRV_PCM_FORMAT_G723_40_1B
 
 #ifdef SNDRV_LITTLE_ENDIAN
 #define	SNDRV_PCM_FORMAT_S16		SNDRV_PCM_FORMAT_S16_LE