Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

95 files changed, 17446 insertions, 4471 deletions

diff --git a/Documentation/scsi/ChangeLog.megaraid b/Documentation/scsi/ChangeLog.megaraid
index 5331d91432c..09f6300eda4 100644
--- a/Documentation/scsi/ChangeLog.megaraid
+++ b/Documentation/scsi/ChangeLog.megaraid
@@ -1,3 +1,38 @@
+Release Date	: Fri Nov 11 12:27:22 EST 2005 - Seokmann Ju <sju@lsil.com>
+Current Version : 2.20.4.7 (scsi module), 2.20.2.6 (cmm module)
+Older Version	: 2.20.4.6 (scsi module), 2.20.2.6 (cmm module)
+
+1.	Sorted out PCI IDs to remove megaraid support overlaps.
+	Based on the patch from Daniel, sorted out PCI IDs along with
+	charactor node name change from 'megadev' to 'megadev_legacy' to avoid
+	conflict.
+	---
+	Hopefully we'll be getting the build restriction zapped much sooner, 
+	but we should also be thinking about totally removing the hardware 
+	support overlap in the megaraid drivers.
+
+	This patch pencils in a date of Feb 06 for this, and performs some 
+	printk abuse in hope that existing legacy users might pick up on what's
+	going on.
+
+	Signed-off-by: Daniel Drake <dsd@gentoo.org>
+	---
+
+2.	Fixed a issue: megaraid always fails to reset handler.
+	---
+	I found that the megaraid driver always fails to reset the
+	adapter with the following message:
+		megaraid: resetting the host...
+		megaraid mbox: reset sequence completed successfully
+		megaraid: fast sync command timed out
+		megaraid: reservation reset failed
+	when the "Cluster mode" of the adapter BIOS is enabled.
+	So, whenever the reset occurs, the adapter goes to
+	offline and just become unavailable.
+
+	Jun'ichi Nomura [mailto:jnomura@mtc.biglobe.ne.jp]
+	---
+
 Release Date	: Mon Mar 07 12:27:22 EST 2005 - Seokmann Ju <sju@lsil.com>
 Current Version : 2.20.4.6 (scsi module), 2.20.2.6 (cmm module)
 Older Version	: 2.20.4.5 (scsi module), 2.20.2.5 (cmm module)
diff --git a/Documentation/scsi/scsi_mid_low_api.txt b/Documentation/scsi/scsi_mid_low_api.txt
index 66565d42288..c4af92bc705 100644
--- a/Documentation/scsi/scsi_mid_low_api.txt
+++ b/Documentation/scsi/scsi_mid_low_api.txt
@@ -150,7 +150,8 @@ scsi devices of which only the first 2 respond:
 LLD                   mid level                    LLD
 ===-------------------=========--------------------===------
 scsi_host_alloc()  -->
-scsi_add_host()  --------+
+scsi_add_host()  ---->
+scsi_scan_host()  -------+
                          |
                     slave_alloc()
                     slave_configure() -->  scsi_adjust_queue_depth()
@@ -196,7 +197,7 @@ of the issues involved. See the section on reference counting below.
 
 
 The hotplug concept may be extended to SCSI devices. Currently, when an
-HBA is added, the scsi_add_host() function causes a scan for SCSI devices
+HBA is added, the scsi_scan_host() function causes a scan for SCSI devices
 attached to the HBA's SCSI transport. On newer SCSI transports the HBA
 may become aware of a new SCSI device _after_ the scan has completed.
 An LLD can use this sequence to make the mid level aware of a SCSI device:
@@ -372,7 +373,7 @@ names all start with "scsi_".
 Summary:
    scsi_activate_tcq - turn on tag command queueing
    scsi_add_device - creates new scsi device (lu) instance
-   scsi_add_host - perform sysfs registration and SCSI bus scan.
+   scsi_add_host - perform sysfs registration and set up transport class
    scsi_adjust_queue_depth - change the queue depth on a SCSI device
    scsi_assign_lock - replace default host_lock with given lock
    scsi_bios_ptable - return copy of block device's partition table
@@ -386,6 +387,7 @@ Summary:
    scsi_remove_device - detach and remove a SCSI device
    scsi_remove_host - detach and remove all SCSI devices owned by host
    scsi_report_bus_reset - report scsi _bus_ reset observed
+   scsi_scan_host - scan SCSI bus
    scsi_track_queue_full - track successive QUEUE_FULL events 
    scsi_unblock_requests - allow further commands to be queued to given host
    scsi_unregister - [calls scsi_host_put()]
@@ -425,10 +427,10 @@ void scsi_activate_tcq(struct scsi_device *sdev, int depth)
  *      Might block: yes
  *
  *      Notes: This call is usually performed internally during a scsi
- *      bus scan when an HBA is added (i.e. scsi_add_host()). So it
+ *      bus scan when an HBA is added (i.e. scsi_scan_host()). So it
  *      should only be called if the HBA becomes aware of a new scsi
- *      device (lu) after scsi_add_host() has completed. If successful
- *      this call we lead to slave_alloc() and slave_configure() callbacks
+ *      device (lu) after scsi_scan_host() has completed. If successful
+ *      this call can lead to slave_alloc() and slave_configure() callbacks
  *      into the LLD.
  *
  *      Defined in: drivers/scsi/scsi_scan.c
@@ -439,7 +441,7 @@ struct scsi_device * scsi_add_device(struct Scsi_Host *shost,
 
 
 /**
- * scsi_add_host - perform sysfs registration and SCSI bus scan.
+ * scsi_add_host - perform sysfs registration and set up transport class
  * @shost:   pointer to scsi host instance
  * @dev:     pointer to struct device of type scsi class
  *
@@ -448,7 +450,11 @@ struct scsi_device * scsi_add_device(struct Scsi_Host *shost,
  *      Might block: no
  *
  *      Notes: Only required in "hotplug initialization model" after a
- *      successful call to scsi_host_alloc().
+ *      successful call to scsi_host_alloc().  This function does not
+ *	scan the bus; this can be done by calling scsi_scan_host() or
+ *	in some other transport-specific way.  The LLD must set up
+ *	the transport template before calling this function and may only
+ *	access the transport class data after this function has been called.
  *
  *      Defined in: drivers/scsi/hosts.c
  **/
@@ -559,7 +565,7 @@ void scsi_deactivate_tcq(struct scsi_device *sdev, int depth)
  *      area for the LLD's exclusive use.
  *      Both associated refcounting objects have their refcount set to 1.
  *      Full registration (in sysfs) and a bus scan are performed later when
- *      scsi_add_host() is called.
+ *      scsi_add_host() and scsi_scan_host() are called.
  *
  *      Defined in: drivers/scsi/hosts.c .
  **/
@@ -699,6 +705,19 @@ void scsi_report_bus_reset(struct Scsi_Host * shost, int channel)
 
 
 /**
+ * scsi_scan_host - scan SCSI bus
+ * @shost: a pointer to a scsi host instance
+ *
+ *	Might block: yes
+ *
+ *	Notes: Should be called after scsi_add_host()
+ *
+ *	Defined in: drivers/scsi/scsi_scan.c
+ **/
+void scsi_scan_host(struct Scsi_Host *shost)
+
+
+/**
  * scsi_track_queue_full - track successive QUEUE_FULL events on given
  *                      device to determine if and when there is a need
  *                      to adjust the queue depth on the device.
diff --git a/block/ll_rw_blk.c b/block/ll_rw_blk.c
index 99c9ca6d599..d4beb9a89ee 100644
--- a/block/ll_rw_blk.c
+++ b/block/ll_rw_blk.c
@@ -239,7 +239,7 @@ void blk_queue_make_request(request_queue_t * q, make_request_fn * mfn)
 	q->backing_dev_info.ra_pages = (VM_MAX_READAHEAD * 1024) / PAGE_CACHE_SIZE;
 	q->backing_dev_info.state = 0;
 	q->backing_dev_info.capabilities = BDI_CAP_MAP_COPY;
-	blk_queue_max_sectors(q, MAX_SECTORS);
+	blk_queue_max_sectors(q, SAFE_MAX_SECTORS);
 	blk_queue_hardsect_size(q, 512);
 	blk_queue_dma_alignment(q, 511);
 	blk_queue_congestion_threshold(q);
@@ -555,7 +555,12 @@ void blk_queue_max_sectors(request_queue_t *q, unsigned short max_sectors)
 		printk("%s: set to minimum %d\n", __FUNCTION__, max_sectors);
 	}
 
-	q->max_sectors = q->max_hw_sectors = max_sectors;
+	if (BLK_DEF_MAX_SECTORS > max_sectors)
+		q->max_hw_sectors = q->max_sectors = max_sectors;
+ 	else {
+		q->max_sectors = BLK_DEF_MAX_SECTORS;
+		q->max_hw_sectors = max_sectors;
+	}
 }
 
 EXPORT_SYMBOL(blk_queue_max_sectors);
@@ -657,8 +662,8 @@ EXPORT_SYMBOL(blk_queue_hardsect_size);
 void blk_queue_stack_limits(request_queue_t *t, request_queue_t *b)
 {
 	/* zero is "infinity" */
-	t->max_sectors = t->max_hw_sectors =
-		min_not_zero(t->max_sectors,b->max_sectors);
+	t->max_sectors = min_not_zero(t->max_sectors,b->max_sectors);
+	t->max_hw_sectors = min_not_zero(t->max_hw_sectors,b->max_hw_sectors);
 
 	t->max_phys_segments = min(t->max_phys_segments,b->max_phys_segments);
 	t->max_hw_segments = min(t->max_hw_segments,b->max_hw_segments);
@@ -1293,9 +1298,15 @@ static inline int ll_new_hw_segment(request_queue_t *q,
 static int ll_back_merge_fn(request_queue_t *q, struct request *req, 
 			    struct bio *bio)
 {
+	unsigned short max_sectors;
 	int len;
 
-	if (req->nr_sectors + bio_sectors(bio) > q->max_sectors) {
+	if (unlikely(blk_pc_request(req)))
+		max_sectors = q->max_hw_sectors;
+	else
+		max_sectors = q->max_sectors;
+
+	if (req->nr_sectors + bio_sectors(bio) > max_sectors) {
 		req->flags |= REQ_NOMERGE;
 		if (req == q->last_merge)
 			q->last_merge = NULL;
@@ -1325,9 +1336,16 @@ static int ll_back_merge_fn(request_queue_t *q, struct request *req,
 static int ll_front_merge_fn(request_queue_t *q, struct request *req, 
 			     struct bio *bio)
 {
+	unsigned short max_sectors;
 	int len;
 
-	if (req->nr_sectors + bio_sectors(bio) > q->max_sectors) {
+	if (unlikely(blk_pc_request(req)))
+		max_sectors = q->max_hw_sectors;
+	else
+		max_sectors = q->max_sectors;
+
+
+	if (req->nr_sectors + bio_sectors(bio) > max_sectors) {
 		req->flags |= REQ_NOMERGE;
 		if (req == q->last_merge)
 			q->last_merge = NULL;
@@ -2144,7 +2162,7 @@ int blk_rq_map_user(request_queue_t *q, struct request *rq, void __user *ubuf,
 	struct bio *bio;
 	int reading;
 
-	if (len > (q->max_sectors << 9))
+	if (len > (q->max_hw_sectors << 9))
 		return -EINVAL;
 	if (!len || !ubuf)
 		return -EINVAL;
@@ -2259,7 +2277,7 @@ int blk_rq_map_kern(request_queue_t *q, struct request *rq, void *kbuf,
 {
 	struct bio *bio;
 
-	if (len > (q->max_sectors << 9))
+	if (len > (q->max_hw_sectors << 9))
 		return -EINVAL;
 	if (!len || !kbuf)
 		return -EINVAL;
@@ -2306,6 +2324,8 @@ void blk_execute_rq_nowait(request_queue_t *q, struct gendisk *bd_disk,
 	generic_unplug_device(q);
 }
 
+EXPORT_SYMBOL_GPL(blk_execute_rq_nowait);
+
 /**
  * blk_execute_rq - insert a request into queue for execution
  * @q:		queue to insert the request in
@@ -2444,7 +2464,7 @@ void disk_round_stats(struct gendisk *disk)
 /*
  * queue lock must be held
  */
-static void __blk_put_request(request_queue_t *q, struct request *req)
+void __blk_put_request(request_queue_t *q, struct request *req)
 {
 	struct request_list *rl = req->rl;
 
@@ -2473,6 +2493,8 @@ static void __blk_put_request(request_queue_t *q, struct request *req)
 	}
 }
 
+EXPORT_SYMBOL_GPL(__blk_put_request);
+
 void blk_put_request(struct request *req)
 {
 	unsigned long flags;
diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c
index 6e7db2e79f4..1d8852f7bbf 100644
--- a/block/scsi_ioctl.c
+++ b/block/scsi_ioctl.c
@@ -233,7 +233,7 @@ static int sg_io(struct file *file, request_queue_t *q,
 	if (verify_command(file, cmd))
 		return -EPERM;
 
-	if (hdr->dxfer_len > (q->max_sectors << 9))
+	if (hdr->dxfer_len > (q->max_hw_sectors << 9))
 		return -EIO;
 
 	if (hdr->dxfer_len)
diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index a6d3baa46f6..a6f2dc66c3d 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -638,7 +638,7 @@ int dm_split_args(int *argc, char ***argvp, char *input)
 static void check_for_valid_limits(struct io_restrictions *rs)
 {
 	if (!rs->max_sectors)
-		rs->max_sectors = MAX_SECTORS;
+		rs->max_sectors = SAFE_MAX_SECTORS;
 	if (!rs->max_phys_segments)
 		rs->max_phys_segments = MAX_PHYS_SEGMENTS;
 	if (!rs->max_hw_segments)
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptba