Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-for-linus-2.6

45 files changed, 4234 insertions, 1584 deletions

diff --git a/drivers/message/fusion/Kconfig b/drivers/message/fusion/Kconfig
index 33f209a39cb..1883d22cffe 100644
--- a/drivers/message/fusion/Kconfig
+++ b/drivers/message/fusion/Kconfig
@@ -35,6 +35,23 @@ config FUSION_FC
 	  LSIFC929X
 	  LSIFC929XL
 
+config FUSION_SAS
+	tristate "Fusion MPT ScsiHost drivers for SAS"
+	depends on PCI && SCSI
+ 	select FUSION
+	select SCSI_SAS_ATTRS
+	---help---
+	  SCSI HOST support for a SAS host adapters.
+
+	  List of supported controllers:
+
+	  LSISAS1064
+	  LSISAS1066
+	  LSISAS1068
+	  LSISAS1064E
+	  LSISAS1066E
+	  LSISAS1068E
+
 config FUSION_MAX_SGE
 	int "Maximum number of scatter gather entries (16 - 128)"
 	depends on FUSION
diff --git a/drivers/message/fusion/Makefile b/drivers/message/fusion/Makefile
index 1d2f9db813c..8a2e2657f4c 100644
--- a/drivers/message/fusion/Makefile
+++ b/drivers/message/fusion/Makefile
@@ -34,5 +34,6 @@
 
 obj-$(CONFIG_FUSION_SPI)	+= mptbase.o mptscsih.o mptspi.o
 obj-$(CONFIG_FUSION_FC)		+= mptbase.o mptscsih.o mptfc.o
+obj-$(CONFIG_FUSION_SAS)	+= mptbase.o mptscsih.o mptsas.o
 obj-$(CONFIG_FUSION_CTL)	+= mptctl.o
 obj-$(CONFIG_FUSION_LAN)	+= mptlan.o
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index f517d0692d5..790a2932ded 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -135,13 +135,12 @@ static void	mpt_adapter_dispose(MPT_ADAPTER *ioc);
 
 static void	MptDisplayIocCapabilities(MPT_ADAPTER *ioc);
 static int	MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag);
-//static u32	mpt_GetIocState(MPT_ADAPTER *ioc, int cooked);
 static int	GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason);
 static int	GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag);
 static int	SendIocInit(MPT_ADAPTER *ioc, int sleepFlag);
 static int	SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag);
 static int	mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag);
-static int	mpt_downloadboot(MPT_ADAPTER *ioc, int sleepFlag);
+static int	mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag);
 static int	mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag);
 static int	KickStart(MPT_ADAPTER *ioc, int ignore, int sleepFlag);
 static int	SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag);
@@ -152,6 +151,7 @@ static int	WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
 static int	GetLanConfigPages(MPT_ADAPTER *ioc);
 static int	GetFcPortPage0(MPT_ADAPTER *ioc, int portnum);
 static int	GetIoUnitPage2(MPT_ADAPTER *ioc);
+int		mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode);
 static int	mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum);
 static int	mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum);
 static void 	mpt_read_ioc_pg_1(MPT_ADAPTER *ioc);
@@ -159,6 +159,8 @@ static void 	mpt_read_ioc_pg_4(MPT_ADAPTER *ioc);
 static void	mpt_timer_expired(unsigned long data);
 static int	SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch);
 static int	SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp);
+static int	mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag);
+static int	mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init);
 
 #ifdef CONFIG_PROC_FS
 static int	procmpt_summary_read(char *buf, char **start, off_t offset,
@@ -175,6 +177,7 @@ static int	ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *
 static void	mpt_sp_ioc_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf);
 static void	mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info);
 static void	mpt_sp_log_info(MPT_ADAPTER *ioc, u32 log_info);
+static void	mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info);
 
 /* module entry point */
 static int  __init    fusion_init  (void);
@@ -206,6 +209,144 @@ pci_enable_io_access(struct pci_dev *pdev)
 	pci_write_config_word(pdev, PCI_COMMAND, command_reg);
 }
 
+/*
+ *  Process turbo (context) reply...
+ */
+static void
+mpt_turbo_reply(MPT_ADAPTER *ioc, u32 pa)
+{
+	MPT_FRAME_HDR *mf = NULL;
+	MPT_FRAME_HDR *mr = NULL;
+	int req_idx = 0;
+	int cb_idx;
+
+	dmfprintk((MYIOC_s_INFO_FMT "Got TURBO reply req_idx=%08x\n",
+				ioc->name, pa));
+
+	switch (pa >> MPI_CONTEXT_REPLY_TYPE_SHIFT) {
+	case MPI_CONTEXT_REPLY_TYPE_SCSI_INIT:
+		req_idx = pa & 0x0000FFFF;
+		cb_idx = (pa & 0x00FF0000) >> 16;
+		mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
+		break;
+	case MPI_CONTEXT_REPLY_TYPE_LAN:
+		cb_idx = mpt_lan_index;
+		/*
+		 *  Blind set of mf to NULL here was fatal
+		 *  after lan_reply says "freeme"
+		 *  Fix sort of combined with an optimization here;
+		 *  added explicit check for case where lan_reply
+		 *  was just returning 1 and doing nothing else.
+		 *  For this case skip the callback, but set up
+		 *  proper mf value first here:-)
+		 */
+		if ((pa & 0x58000000) == 0x58000000) {
+			req_idx = pa & 0x0000FFFF;
+			mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
+			mpt_free_msg_frame(ioc, mf);
+			mb();
+			return;
+			break;
+		}
+		mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa);
+		break;
+	case MPI_CONTEXT_REPLY_TYPE_SCSI_TARGET:
+		cb_idx = mpt_stm_index;
+		mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa);
+		break;
+	default:
+		cb_idx = 0;
+		BUG();
+	}
+
+	/*  Check for (valid) IO callback!  */
+	if (cb_idx < 1 || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS ||
+			MptCallbacks[cb_idx] == NULL) {
+		printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n",
+				__FUNCTION__, ioc->name, cb_idx);
+		goto out;
+	}
+
+	if (MptCallbacks[cb_idx](ioc, mf, mr))
+		mpt_free_msg_frame(ioc, mf);
+ out:
+	mb();
+}
+
+static void
+mpt_reply(MPT_ADAPTER *ioc, u32 pa)
+{
+	MPT_FRAME_HDR	*mf;
+	MPT_FRAME_HDR	*mr;
+	int		 req_idx;
+	int		 cb_idx;
+	int		 freeme;
+
+	u32 reply_dma_low;
+	u16 ioc_stat;
+
+	/* non-TURBO reply!  Hmmm, something may be up...
+	 *  Newest turbo reply mechanism; get address
+	 *  via left shift 1 (get rid of MPI_ADDRESS_REPLY_A_BIT)!
+	 */
+
+	/* Map DMA address of reply header to cpu address.
+	 * pa is 32 bits - but the dma address may be 32 or 64 bits
+	 * get offset based only only the low addresses
+	 */
+
+	reply_dma_low = (pa <<= 1);
+	mr = (MPT_FRAME_HDR *)((u8 *)ioc->reply_frames +
+			 (reply_dma_low - ioc->reply_frames_low_dma));
+
+	req_idx = le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx);
+	cb_idx = mr->u.frame.hwhdr.msgctxu.fld.cb_idx;
+	mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
+
+	dmfprintk((MYIOC_s_INFO_FMT "Got non-TURBO reply=%p req_idx=%x cb_idx=%x Function=%x\n",
+			ioc->name, mr, req_idx, cb_idx, mr->u.hdr.Function));
+	DBG_DUMP_REPLY_FRAME(mr)
+
+	 /*  Check/log IOC log info
+	 */
+	ioc_stat = le16_to_cpu(mr->u.reply.IOCStatus);
+	if (ioc_stat & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) {
+		u32	 log_info = le32_to_cpu(mr->u.reply.IOCLogInfo);
+		if (ioc->bus_type == FC)
+			mpt_fc_log_info(ioc, log_info);
+		else if (ioc->bus_type == SCSI)
+			mpt_sp_log_info(ioc, log_info);
+		else if (ioc->bus_type == SAS)
+			mpt_sas_log_info(ioc, log_info);
+	}
+	if (ioc_stat & MPI_IOCSTATUS_MASK) {
+		if (ioc->bus_type == SCSI &&
+		    cb_idx != mpt_stm_index &&
+		    cb_idx != mpt_lan_index)
+			mpt_sp_ioc_info(ioc, (u32)ioc_stat, mf);
+	}
+
+
+	/*  Check for (valid) IO callback!  */
+	if (cb_idx < 1 || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS ||
+			MptCallbacks[cb_idx] == NULL) {
+		printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n",
+				__FUNCTION__, ioc->name, cb_idx);
+		freeme = 0;
+		goto out;
+	}
+
+	freeme = MptCallbacks[cb_idx](ioc, mf, mr);
+
+ out:
+	/*  Flush (non-TURBO) reply with a WRITE!  */
+	CHIPREG_WRITE32(&ioc->chip->ReplyFifo, pa);
+
+	if (freeme)
+		mpt_free_msg_frame(ioc, mf);
+	mb();
+}
+
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /*
  *	mpt_interrupt - MPT adapter (IOC) specific interrupt handler.
@@ -227,164 +368,21 @@ pci_enable_io_access(struct pci_dev *pdev)
 static irqreturn_t
 mpt_interrupt(int irq, void *bus_id, struct pt_regs *r)
 {
-	MPT_ADAPTER	*ioc;
-	MPT_FRAME_HDR	*mf;
-	MPT_FRAME_HDR	*mr;
-	u32		 pa;
-	int		 req_idx;
-	int		 cb_idx;
-	int		 type;
-	int		 freeme;
-
-	ioc = (MPT_ADAPTER *)bus_id;
+	MPT_ADAPTER *ioc = bus_id;
+	u32 pa;
 
 	/*
 	 *  Drain the reply FIFO!
-	 *
-	 * NOTES: I've seen up to 10 replies processed in this loop, so far...
-	 * Update: I've seen up to 9182 replies processed in this loop! ??
-	 * Update: Limit ourselves to processing max of N replies
-	 *	(bottom of loop).
 	 */
 	while (1) {
-
-		if ((pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo)) == 0xFFFFFFFF)
+		pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo);
+		if (pa == 0xFFFFFFFF)
 			return IRQ_HANDLED;
-
-		cb_idx = 0;
-		freeme = 0;
-
-		/*
-		 *  Check for non-TURBO reply!
-		 */
-		if (pa & MPI_ADDRESS_REPLY_A_BIT) {
-			u32 reply_dma_low;
-			u16 ioc_stat;
-
-			/* non-TURBO reply!  Hmmm, something may be up...
-			 *  Newest turbo reply mechanism; get address
-			 *  via left shift 1 (get rid of MPI_ADDRESS_REPLY_A_BIT)!
-			 */
-
-			/* Map DMA address of reply header to cpu address.
-			 * pa is 32 bits - but the dma address may be 32 or 64 bits
-			 * get offset based only only the low addresses
-			 */
-			reply_dma_low = (pa = (pa << 1));
-			mr = (MPT_FRAME_HDR *)((u8 *)ioc->reply_frames +
-					 (reply_dma_low - ioc->reply_frames_low_dma));
-
-			req_idx = le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx);
-			cb_idx = mr->u.frame.hwhdr.msgctxu.fld.cb_idx;
-			mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
-
-			dmfprintk((MYIOC_s_INFO_FMT "Got non-TURBO reply=%p req_idx=%x cb_idx=%x Function=%x\n",
-					ioc->name, mr, req_idx, cb_idx, mr->u.hdr.Function));
-			DBG_DUMP_REPLY_FRAME(mr)
-
-			 /*  Check/log IOC log info
-			 */
-			ioc_stat = le16_to_cpu(mr->u.reply.IOCStatus);
-			if (ioc_stat & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) {
-				u32	 log_info = le32_to_cpu(mr->u.reply.IOCLogInfo);
-				if (ioc->bus_type == FC)
-					mpt_fc_log_info(ioc, log_info);
-				else if (ioc->bus_type == SCSI)
-					mpt_sp_log_info(ioc, log_info);
-			}
-			if (ioc_stat & MPI_IOCSTATUS_MASK) {
-				if (ioc->bus_type == SCSI)
-					mpt_sp_ioc_info(ioc, (u32)ioc_stat, mf);
-			}
-		} else {
-			/*
-			 *  Process turbo (context) reply...
-			 */
-			dmfprintk((MYIOC_s_INFO_FMT "Got TURBO reply req_idx=%08x\n", ioc->name, pa));
-			type = (pa >> MPI_CONTEXT_REPLY_TYPE_SHIFT);
-			if (type == MPI_CONTEXT_REPLY_TYPE_SCSI_TARGET) {
-				cb_idx = mpt_stm_index;
-				mf = NULL;
-				mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa);
-			} else if (type == MPI_CONTEXT_REPLY_TYPE_LAN) {
-				cb_idx = mpt_lan_index;
-				 /*  Blind set of mf to NULL here was fatal
-				 *  after lan_reply says "freeme"
-				 *  Fix sort of combined with an optimization here;
-				 *  added explicit check for case where lan_reply
-				 *  was just returning 1 and doing nothing else.
-				 *  For this case skip the callback, but set up
-				 *  proper mf value first here:-)
-				 */
-				if ((pa & 0x58000000) == 0x58000000) {
-					req_idx = pa & 0x0000FFFF;
-					mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
-					freeme = 1;
-					/*
-					 *  IMPORTANT!  Invalidate the callback!
-					 */
-					cb_idx = 0;
-				} else {
-					mf = NULL;
-				}
-				mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa);
-			} else {
-				req_idx = pa & 0x0000FFFF;
-				cb_idx = (pa & 0x00FF0000) >> 16;
-				mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
-				mr = NULL;
-			}
-			pa = 0;					/* No reply flush! */
-		}
-
-#ifdef MPT_DEBUG_IRQ
-		if (ioc->bus_type == SCSI) {
-			/* Verify mf, mr are reasonable.
-			 */
-			if ((mf) && ((mf >= MPT_INDEX_2_MFPTR(ioc, ioc->req_depth))
-				|| (mf < ioc->req_frames)) ) {
-				printk(MYIOC_s_WARN_FMT
-					"mpt_interrupt: Invalid mf (%p)!\n", ioc->name, (void *)mf);
-				cb_idx = 0;
-				pa = 0;
-				freeme = 0;
-			}
-			if ((pa) && (mr) && ((mr >= MPT_INDEX_2_RFPTR(ioc, ioc->req_depth))
-				|| (mr < ioc->reply_frames)) ) {
-				printk(MYIOC_s_WARN_FMT
-					"mpt_interrupt: Invalid rf (%p)!\n", ioc->name, (void *)mr);
-				cb_idx = 0;
-				pa = 0;
-				freeme = 0;
-			}
-			if (cb_idx > (MPT_MAX_PROTOCOL_DRIVERS-1)) {
-				printk(MYIOC_s_WARN_FMT
-					"mpt_interrupt: Invalid cb_idx (%d)!\n", ioc->name, cb_idx);
-				cb_idx = 0;
-				pa = 0;
-				freeme = 0;
-			}
-		}
-#endif
-
-		/*  Check for (valid) IO callback!  */
-		if (cb_idx) {
-			/*  Do the callback!  */
-			freeme = (*(MptCallbacks[cb_idx]))(ioc, mf, mr);
-		}
-
-		if (pa) {
-			/*  Flush (non-TURBO) reply with a WRITE!  */
-			CHIPREG_WRITE32(&ioc->chip->ReplyFifo, pa);
-		}
-
-		if (freeme) {
-			/*  Put Request back on FreeQ!  */
-			mpt_free_msg_frame(ioc, mf);
-		}
-
-		mb();
-	}	/* drain reply FIFO */
+		else if (pa & MPI_ADDRESS_REPLY_A_BIT)
+			mpt_reply(ioc, pa);
+		else
+			mpt_turbo_reply(ioc, pa);
+	}
 
 	return IRQ_HANDLED;
 }
@@ -509,6 +507,14 @@ mpt_base_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *reply)
 			pCfg->wait_done = 1;
 			wake_up(&mpt_waitq);
 		}
+	} else if (func == MPI_FUNCTION_SAS_IO_UNIT_CONTROL) {
+		/* we should be always getting a reply frame */
+		memcpy(ioc->persist_reply_frame, reply,
+		    min(MPT_DEFAULT_FRAME_SIZE,
+		    4*reply->u.reply.MsgLength));
+		del_timer(&ioc->persist_timer);
+		ioc->persist_wait_done = 1;
+		wake_up(&mpt_waitq);
 	} else {
 		printk(MYIOC_s_ERR_FMT "Unexpected msg function (=%02Xh) reply received!\n",
 				ioc->name, func);
@@ -750,6 +756,7 @@ mpt_get_msg_frame(int handle, MPT_ADAPTER *ioc)
 		mf = list_entry(ioc->FreeQ.next, MPT_FRAME_HDR,
 				u.frame.linkage.list);
 		list_del(&mf->u.frame.linkage.list);
+		mf->u.frame.linkage.arg1 = 0;
 		mf->u.frame.hwhdr.msgctxu.fld.cb_idx = handle;	/* byte */
 		req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
 								/* u16! */
@@ -845,6 +852,7 @@ mpt_free_msg_frame(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
 
 	/*  Put Request back on FreeQ!  */
 	spin_lock_irqsave(&ioc->FreeQlock, flags);
+	mf->u.frame.linkage.arg1 = 0xdeadbeaf; /* signature to know if this mf is freed */
 	list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeQ);
 #ifdef MFCNT
 	ioc->mfcnt--;
@@ -971,12 +979,123 @@ mpt_send_handshake_request(int handle, MPT_ADAPTER *ioc, int reqBytes, u32 *req,
 
 	/* Make sure there are no doorbells */
 	CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
-	
+
 	return r;
 }
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /**
+ * mpt_host_page_access_control - provides mechanism for the host
+ * driver to control the IOC's Host Page Buffer access.
+ * @ioc: Pointer to MPT adapter structure
+ * @access_control_value: define bits below
+ *
+ * Access Control Value - bits[15:12]
+ * 0h Reserved
+ * 1h Enable Access { MPI_DB_HPBAC_ENABLE_ACCESS }
+ * 2h Disable Access { MPI_DB_HPBAC_DISABLE_ACCESS }
+ * 3h Free Buffer { MPI_DB_HPBAC_FREE_BUFFER }
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+
+static int
+mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag)
+{
+	int	 r = 0;
+
+	/* return if in use */
+	if (CHIPREG_READ32(&ioc->chip->Doorbell)
+	    & MPI_DOORBELL_ACTIVE)
+	    return -1;
+
+	CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
+
+	CHIPREG_WRITE32(&ioc->chip->Doorbell,
+		((MPI_FUNCTION_HOST_PAGEBUF_ACCESS_CONTROL
+		 <<MPI_DOORBELL_FUNCTION_SHIFT) |
+		 (access_control_value<<12)));
+
+	/* Wait for IOC to clear Doorbell Status bit */
+	if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
+		return -2;
+	}else
+		return 0;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ *	mpt_host_page_alloc - allocate system memory for the fw
+ *	If we already allocated memory in past, then resend the same pointer.
+ *	ioc@: Pointer to pointer to IOC adapter
+ *	ioc_init@: Pointer to ioc init config page
+ *
+ *	Returns 0 for success, non-zero for failure.
+ */
+static int
+mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init)
+{
+	char	*psge;
+	int	flags_length;
+	u32	host_page_buffer_sz=0;
+
+	if(!ioc->HostPageBuffer) {
+
+		host_page_buffer_sz =
+		    le32_to_cpu(ioc->facts.HostPageBufferSGE.FlagsLength) & 0xFFFFFF;
+
+		if(!host_page_buffer_sz)
+			return 0; /* fw doesn't need any host buffers */
+
+		/* spin till we get enough memory */
+		while(host_page_buffer_sz > 0) {
+
+			if((ioc->HostPageBuffer = pci_alloc_consistent(
+			    ioc->pcidev,
+			    host_page_buffer_sz,
+			    &ioc->HostPageBuffer_dma)) != NULL) {
+
+				dinitprintk((MYIOC_s_INFO_FMT
+				    "host_page_buffer @ %p, dma @ %x, sz=%d bytes\n",
+				    ioc->name,
+				    ioc->HostPageBuffer,
+				    ioc->HostPageBuffer_dma,
+				    host_page_buffer_sz));
+				ioc->alloc_total += host_page_buffer_sz;
+				ioc->HostPageBuffer_sz = host_page_buffer_sz;
+				break;
+			}
+
+			host_page_buffer_sz -= (4*1024);
+		}
+	}
+
+	if(!ioc->HostPageBuffer) {
+		printk(MYIOC_s_ERR_FMT
+		    "Failed to alloc memory for host_page_buffer!\n",
+		    ioc->name);
+		return -999;
+	}
+
+	psge = (char *)&ioc_init->HostPageBufferSGE;
+	flags_length = MPI_SGE_FLAGS_SIMPLE_ELEMENT |
+	    MPI_SGE_FLAGS_SYSTEM_ADDRESS |
+	    MPI_SGE_FLAGS_32_BIT_ADDRESSING |
+	    MPI_SGE_FLAGS_HOST_TO_IOC |
+	    MPI_SGE_FLAGS_END_OF_BUFFER;
+	if (sizeof(dma_addr_t) == sizeof(u64)) {
+	    flags_length |= MPI_SGE_FLAGS_64_BIT_ADDRESSING;
+	}
+	flags_length = flags_length << MPI_SGE_FLAGS_SHIFT;
+	flags_length |= ioc->HostPageBuffer_sz;
+	mpt_add_sge(psge, flags_length, ioc->HostPageBuffer_dma);
+	ioc->facts.HostPageBufferSGE = ioc_init->HostPageBufferSGE;
+
+return 0;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
  *	mpt_verify_adapter - Given a unique IOC identifier, set pointer to
  *	the associated MPT adapter structure.
  *	@iocid: IOC unique identifier (integer)
@@ -1084,7 +1203,7 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	/* Initilize SCSI Config Data structure
 	 */
-	memset(&ioc->spi_data, 0, sizeof(ScsiCfgData));
+	memset(&ioc->spi_data, 0, sizeof(SpiCfgData));
 
 	/* Initialize the running configQ head.
 	 */
@@ -1213,6 +1332,33 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
 		ioc->prod_name = "LSI53C1035";
 		ioc->bus_type = SCSI;
 	}
+	else if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1064) {
+		ioc->prod_name = "LSISAS1064";
+		ioc->bus_type = SAS;
+		ioc->errata_flag_1064 = 1;
+	}
+	else if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1066) {
+		ioc->prod_name = "LSISAS1066";
+		ioc->bus_type = SAS;
+		ioc->errata_flag_1064 = 1;
+	}
+	else if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1068) {
+		ioc->prod_name = "LSISAS1068";
+		ioc->bus_type = SAS;
+		ioc->errata_flag_1064 = 1;
+	}
+	else if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1064E) {
+		ioc->prod_name = "LSISAS1064E";
+		ioc->bus_type = SAS;
+	}
+	else if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1066E) {
+		ioc->prod_name = "LSISAS1066E";
+		ioc->bus_type = SAS;
+	}
+	else if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1068E) {
+		ioc->prod_name = "LSISAS1068E";
+		ioc->bus_type = SAS;
+	}
 
 	if (ioc->errata_flag_1064)
 		pci_disable_io_access(pdev);
@@ -1604,8 +1750,23 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
 			 */
 			if (ret == 0) {
 				rc = mpt_do_upload(ioc, sleepFlag);
-				if (rc != 0)
+				if (rc == 0) {
+					if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) {
+						/*
+						 * Maintain only one pointer to FW memory
+						 * so there will not be two attempt to
+						 * downloadboot onboard dual function
+						 * chips (mpt_adapter_disable,
+						 * mpt_diag_reset)
+						 */
+						ioc->cached_fw = NULL;
+						ddlprintk((MYIOC_s_INFO_FMT ": mpt_upload:  alt_%s has cached_fw=%p \n",
+							ioc->name, ioc->alt_ioc->name, ioc->alt_ioc->cached_fw));
+					}
+				} else {
 					printk(KERN_WARNING MYNAM ": firmware upload failure!\n");
+					ret = -5;
+				}
 			}
 		}
 	}
@@ -1640,7 +1801,22 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
 	 *	and we try GetLanConfigPages again...
 	 */
 	if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) {
-		if (ioc->bus_type == FC) {
+		if (ioc->bus_type == SAS) {
+
+			/* clear persistency table */
+			if(ioc->facts.IOCExceptions &
+			    MPI_IOCFACTS_EXCEPT_PERSISTENT_TABLE_FULL) {
+				ret = mptbase_sas_persist_operation(ioc,
+				    MPI_SAS_OP_CLEAR_NOT_PRESENT);
+				if(ret != 0)
+					return -1;
+			}
+
+			/* Find IM volumes
+			 */
+			mpt_findImVolumes(ioc);
+
+		} else if (ioc->bus_type == FC) {
 			/*
 			 *  Pre-fetch FC port WWN and stuff...
 			 *  (FCPortPage0_t stuff)
@@ -1783,7 +1959,7 @@ mpt_adapter_disable(MPT_ADAPTER *ioc)
 
 	if (ioc->cached_fw != NULL) {
 		ddlprintk((KERN_INFO MYNAM ": mpt_adapter_disable: Pushing FW onto adapter\n"));
-		if ((ret = mpt_downloadboot(ioc, NO_SLEEP)) < 0) {
+		if ((ret = mpt_downloadboot(ioc, (MpiFwHeader_t *)ioc->cached_fw, NO_SLEEP)) < 0) {
 			printk(KERN_WARNING MYNAM
 				": firmware downloadboot failure (%d)!\n", ret);
 		}
@@ -1831,9 +2007,9 @@ mpt_adapter_disable(MPT_ADAPTER *ioc)
 	}
 
 	kfree(ioc->spi_data.nvram);
-	kfree(ioc->spi_data.pIocPg3);
+	kfree(ioc->raid_data.pIocPg3);
 	ioc->spi_data.nvram = NULL;
-	ioc->spi_data.pIocPg3 = NULL;
+	ioc->raid_data.pIocPg3 = NULL;
 
 	if (ioc->spi_data.pIocPg4 != NULL) {
 		sz = ioc->spi_data.IocPg4Sz;
@@ -1852,6 +2028,23 @@ mpt_adapter_disable(MPT_ADAPTER *ioc)
 
 	kfree(ioc->ChainToChain);
 	ioc->ChainToChain = NULL;
+
+	if (ioc->HostPageBuffer != NULL) {
+		if((ret = mpt_host_page_access_control(ioc,
+		    MPI_DB_HPBAC_FREE_BUFFER, NO_SLEEP)) != 0) {
+			printk(KERN_ERR MYNAM
+			   ": %s: host page buffers free failed (%d)!\n",
+			    __FUNCTION__, ret);
+		}
+		dexitprintk((KERN_INFO MYNAM ": %s HostPageBuffer free  @ %p, sz=%d bytes\n",
+		 	ioc->name, ioc->HostPageBuffer, ioc->HostPageBuffer_sz));
+		pci_free_consistent(ioc->pcidev, ioc->HostPageBuffer_sz,
+				ioc->HostPageBuffer,
+				ioc->HostPageBuffer_dma);
+		ioc->HostPageBuffer = NULL;
+		ioc->HostPageBuffer_sz = 0;
+		ioc->alloc_total -= ioc->HostPageBuffer_sz;
+	}
 }
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -2034,7 +2227,7 @@ MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag)
 	 *  Loop here waiting for IOC to come READY.
 	 */
 	ii = 0;
-	cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 15;	/* 15 seconds */
+	cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 5;	/* 5 seconds */
 
 	while ((ioc_state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) {
 		if (ioc_state == MPI_IOC_STATE_OPERATIONAL) {
@@ -2212,6 +2405,7 @@ GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason)
 				le32_to_cpu(facts->CurrentSenseBufferHighAddr);
 		facts->CurReplyFrameSize =
 				le16_to_cpu(facts->CurReplyFrameSize);
+		facts->IOCCapabilities = le32_to_cpu(facts->IOCCapabilities);
 
 		/*
 		 * Handle NEW (!) IOCFactsReply fields in MPI-1.01.xx
@@ -2383,13 +2577,25 @@ SendIocInit(MPT_ADAPTER *ioc, int sleepFlag)
 	ddlprintk((MYIOC_s_INFO_FMT "upload_fw %d facts.Flags=%x\n",
 		   ioc->name, ioc->upload_fw, ioc->facts.Flags));
 
-	if (ioc->bus_type == FC)
+	if(ioc->bus_type == SAS)
+		ioc_init.MaxDevices = ioc->facts.MaxDevices;
+	else if(ioc->bus_type == FC)
 		ioc_init.MaxDevices = MPT_MAX_FC_DEVICES;
 	else
 		ioc_init.MaxDevices = MPT_MAX_SCSI_DEVICES;
-	
 	ioc_init.MaxBuses = MPT_MAX_BUS;
-
+	dinitprintk((MYIOC_s_INFO_FMT "