Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (278 commits) arm: remove machine_desc.io_pg_offst and .phys_io arm: use addruart macro to establish debug mappings arm: return both physical and virtual addresses from addruart arm/debug: consolidate addruart macros for CONFIG_DEBUG_ICEDCC ARM: make struct machine_desc definition coherent with its comment eukrea_mbimxsd-baseboard: Pass the correct GPIO to gpio_free cpuimx27: fix compile when ULPI is selected mach-pcm037_eet: fix compile errors Fixing ethernet driver compilation error for i.MX31 ADS board cpuimx51: update board support mx5: add cpuimx51sd module and its baseboard iomux-mx51: fix GPIO_1_xx 's IOMUX configuration imx-esdhc: update devices registration mx51: add resources for SD/MMC on i.MX51 iomux-mx51: fix SD1 and SD2's iomux configuration clock-mx51: rename CLOCK1 to CLOCK_CCGR for better readability clock-mx51: factorize clk_set_parent and clk_get_rate eukrea_mbimxsd: add support for DVI displays cpuimx25 & cpuimx35: fix OTG port registration in host mode i.MX31 and i.MX35 : fix errate TLSbo65953 and ENGcm09472 ...
author: Linus Torvalds <torvalds@linux-foundation.org> 2010-10-21 16:42:32 -0700
committer: Linus Torvalds <torvalds@linux-foundation.org> 2010-10-21 16:42:32 -0700
commit: b5153163ed580e00c67bdfecb02b2e3843817b3e (patch)
tree: b8c878601f07f5df8f694435857a5f3dcfd75482
parent: a8cbf22559ceefdcdfac00701e8e6da7518b7e8e (diff)
parent: 6451d7783ba5ff24eb1a544eaa6665b890f30466 (diff)
844 files changed, 25244 insertions, 6688 deletions
diff --git a/Documentation/arm/00-INDEX b/Documentation/arm/00-INDEX
index 7f5fc3ba9c9..ecf7d04bca2 100644
--- a/Documentation/arm/00-INDEX
+++ b/Documentation/arm/00-INDEX
@@ -6,6 +6,8 @@ Interrupts
 	- ARM Interrupt subsystem documentation
 IXP2000
 	- Release Notes for Linux on Intel's IXP2000 Network Processor
+msm
+	- MSM specific documentation
 Netwinder
 	- Netwinder specific documentation
 Porting
diff --git a/Documentation/arm/msm/gpiomux.txt b/Documentation/arm/msm/gpiomux.txt
new file mode 100644
index 00000000000..67a81620adf
--- /dev/null
+++ b/Documentation/arm/msm/gpiomux.txt
@@ -0,0 +1,176 @@
+This document provides an overview of the msm_gpiomux interface, which
+is used to provide gpio pin multiplexing and configuration on mach-msm
+targets.
+
+History
+=======
+
+The first-generation API for gpio configuration & multiplexing on msm
+is the function gpio_tlmm_config().  This function has a few notable
+shortcomings, which led to its deprecation and replacement by gpiomux:
+
+The 'disable' parameter:  Setting the second parameter to
+gpio_tlmm_config to GPIO_CFG_DISABLE tells the peripheral
+processor in charge of the subsystem to perform a look-up into a
+low-power table and apply the low-power/sleep setting for the pin.
+As the msm family evolved this became problematic. Not all pins
+have sleep settings, not all peripheral processors will accept requests
+to apply said sleep settings, and not all msm targets have their gpio
+subsystems managed by a peripheral processor. In order to get consistent
+behavior on all targets, drivers are forced to ignore this parameter,
+rendering it useless.
+
+The 'direction' flag: for all mux-settings other than raw-gpio (0),
+the output-enable bit of a gpio is hard-wired to a known
+input (usually VDD or ground).  For those settings, the direction flag
+is meaningless at best, and deceptive at worst.  In addition, using the
+direction flag to change output-enable (OE) directly can cause trouble in
+gpiolib, which has no visibility into gpio direction changes made
+in this way.  Direction control in gpio mode should be made through gpiolib.
+
+Key Features of gpiomux
+=======================
+
+- A consistent interface across all generations of msm.  Drivers can expect
+the same results on every target.
+- gpiomux plays nicely with gpiolib.  Functions that should belong to gpiolib
+are left to gpiolib and not duplicated here.  gpiomux is written with the
+intent that gpio_chips will call gpiomux reference-counting methods
+from their request() and free() hooks, providing full integration.
+- Tabular configuration.  Instead of having to call gpio_tlmm_config
+hundreds of times, gpio configuration is placed in a single table.
+- Per-gpio sleep.  Each gpio is individually reference counted, allowing only
+those lines which are in use to be put in high-power states.
+- 0 means 'do nothing': all flags are designed so that the default memset-zero
+equates to a sensible default of 'no configuration', preventing users
+from having to provide hundreds of 'no-op' configs for unused or
+unwanted lines.
+
+Usage
+=====
+
+To use gpiomux, provide configuration information for relevant gpio lines
+in the msm_gpiomux_configs table.  Since a 0 equates to "unconfigured",
+only those lines to be managed by gpiomux need to be specified.  Here
+is a completely fictional example:
+
+struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {
+	[12] = {
+		.active = GPIOMUX_VALID | GPIOMUX_DRV_8MA | GPIOMUX_FUNC_1,
+		.suspended = GPIOMUX_VALID | GPIOMUX_PULL_DOWN,
+	},
+	[34] = {
+		.suspended = GPIOMUX_VALID | GPIOMUX_PULL_DOWN,
+	},
+};
+
+To indicate that a gpio is in use, call msm_gpiomux_get() to increase
+its reference count.  To decrease the reference count, call msm_gpiomux_put().
+
+The effect of this configuration is as follows:
+
+When the system boots, gpios 12 and 34 will be initialized with their
+'suspended' configurations.  All other gpios, which were left unconfigured,
+will not be touched.
+
+When msm_gpiomux_get() is called on gpio 12 to raise its reference count
+above 0, its active configuration will be applied.  Since no other gpio
+line has a valid active configuration, msm_gpiomux_get() will have no
+effect on any other line.
+
+When msm_gpiomux_put() is called on gpio 12 or 34 to drop their reference
+count to 0, their suspended configurations will be applied.
+Since no other gpio line has a valid suspended configuration, no other
+gpio line will be effected by msm_gpiomux_put().  Since gpio 34 has no valid
+active configuration, this is effectively a no-op for gpio 34 as well,
+with one small caveat, see the section "About Output-Enable Settings".
+
+All of the GPIOMUX_VALID flags may seem like unnecessary overhead, but
+they address some important issues.  As unused entries (all those
+except 12 and 34) are zero-filled, gpiomux needs a way to distinguish
+the used fields from the unused.  In addition, the all-zero pattern
+is a valid configuration!  Therefore, gpiomux defines an additional bit
+which is used to indicate when a field is used.  This has the pleasant
+side-effect of allowing calls to msm_gpiomux_write to use '0' to indicate
+that a value should not be changed:
+
+  msm_gpiomux_write(0, GPIOMUX_VALID, 0);
+
+replaces the active configuration of gpio 0 with an all-zero configuration,
+but leaves the suspended configuration as it was.
+
+Static Configurations
+=====================
+
+To install a static configuration, which is applied at boot and does
+not change after that, install a configuration with a suspended component
+but no active component, as in the previous example:
+
+	[34] = {
+		.suspended = GPIOMUX_VALID | GPIOMUX_PULL_DOWN,
+	},
+
+The suspended setting is applied during boot, and the lack of any valid
+active setting prevents any other setting from being applied at runtime.
+If other subsystems attempting to access the line is a concern, one could
+*really* anchor the configuration down by calling msm_gpiomux_get on the
+line at initialization to move the line into active mode.  With the line
+held, it will never be re-suspended, and with no valid active configuration,
+no new configurations will be applied.
+
+But then, if having other subsystems grabbing for the line is truly a concern,
+it should be reserved with gpio_request instead, which carries an implicit
+msm_gpiomux_get.
+
+gpiomux and gpiolib
+===================
+
+It is expected that msm gpio_chips will call msm_gpiomux_get() and
+msm_gpiomux_put() from their request and free hooks, like this fictional
+example:
+
+static int request(struct gpio_chip *chip, unsigned offset)
+{
+        return msm_gpiomux_get(chip->base + offset);
+}
+
+static void free(struct gpio_chip *chip, unsigned offset)
+{
+        msm_gpiomux_put(chip->base + offset);
+}
+
+	...somewhere in a gpio_chip declaration...
+	.request = request,
+	.free    = free,
+
+This provides important functionality:
+- It guarantees that a gpio line will have its 'active' config applied
+  when the line is requested, and will not be suspended while the line
+  remains requested; and
+- It guarantees that gpio-direction settings from gpiolib behave sensibly.
+  See "About Output-Enable Settings."
+
+This mechanism allows for "auto-request" of gpiomux lines via gpiolib
+when it is suitable.  Drivers wishing more exact control are, of course,
+free to also use msm_gpiomux_set and msm_gpiomux_get.
+
+About Output-Enable Settings
+============================
+
+Some msm targets do not have the ability to query the current gpio
+configuration setting.  This means that changes made to the output-enable
+(OE) bit by gpiolib cannot be consistently detected and preserved by gpiomux.
+Therefore, when gpiomux applies a configuration setting, any direction
+settings which may have been applied by gpiolib are lost and the default
+input settings are re-applied.
+
+For this reason, drivers should not assume that gpio direction settings
+continue to hold if they free and then re-request a gpio.  This seems like
+common sense - after all, anybody could have obtained the line in the
+meantime - but it needs saying.
+
+This also means that calls to msm_gpiomux_write will reset the OE bit,
+which means that if the gpio line is held by a client of gpiolib and
+msm_gpiomux_write is called, the direction setting has been lost and
+gpiolib's internal state has been broken.
+Release gpio lines before reconfiguring them.
diff --git a/MAINTAINERS b/MAINTAINERS
index 6f5b5b2b528..b618b1e86c4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -990,11 +990,23 @@ S:	Supported
 F:	arch/arm/mach-shmobile/
 F:	drivers/sh/
 
+ARM/TELECHIPS ARM ARCHITECTURE
+M:	"Hans J. Koch" <hjk@linutronix.de>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm/plat-tcc/
+F:	arch/arm/mach-tcc8k/
+
 ARM/TECHNOLOGIC SYSTEMS TS7250 MACHINE SUPPORT
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 
+ARM/TETON BGA MACHINE SUPPORT
+M:	Mark F. Brown <mark.brown314@gmail.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+
 ARM/THECUS N2100 MACHINE SUPPORT
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
diff --git a/Makefile b/Makefile
index d3c10719bbb..3e438055a92 100644
--- a/Makefile
+++ b/Makefile
@@ -554,8 +554,15 @@ endif
 ifdef CONFIG_FRAME_POINTER
 KBUILD_CFLAGS	+= -fno-omit-frame-pointer -fno-optimize-sibling-calls
 else
+# Some targets (ARM with Thumb2, for example), can't be built with frame
+# pointers.  For those, we don't have FUNCTION_TRACER automatically
+# select FRAME_POINTER.  However, FUNCTION_TRACER adds -pg, and this is
+# incompatible with -fomit-frame-pointer with current GCC, so we don't use
+# -fomit-frame-pointer with FUNCTION_TRACER.
+ifndef CONFIG_FUNCTION_TRACER
 KBUILD_CFLAGS	+= -fomit-frame-pointer
 endif
+endif
 
 ifdef CONFIG_DEBUG_INFO
 KBUILD_CFLAGS	+= -g
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 9103904b3da..3849887157e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -19,6 +19,8 @@ config ARM
 	select HAVE_KPROBES if (!XIP_KERNEL)
 	select HAVE_KRETPROBES if (HAVE_KPROBES)
 	select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
+	select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
+	select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL)
 	select HAVE_GENERIC_DMA_COHERENT
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_LZO
@@ -27,6 +29,7 @@ config ARM
 	select HAVE_PERF_EVENTS
 	select PERF_USE_VMALLOC
 	select HAVE_REGS_AND_STACK_ACCESS_API
+	select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V7))
 	help
 	  The ARM series is a line of low-power-consumption RISC chip designs
 	  licensed by ARM Ltd and targeted at embedded applications and
@@ -146,6 +149,9 @@ config ARCH_HAS_CPUFREQ
 	  and that the relevant menu configurations are displayed for
 	  it.
 
+config ARCH_HAS_CPU_IDLE_WAIT
+       def_bool y
+
 config GENERIC_HWEIGHT
 	bool
 	default y
@@ -511,6 +517,7 @@ config ARCH_MMP
 	select GENERIC_CLOCKEVENTS
 	select TICK_ONESHOT
 	select PLAT_PXA
+	select SPARSE_IRQ
 	help
 	  Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
 
@@ -588,6 +595,7 @@ config ARCH_PXA
 	select GENERIC_CLOCKEVENTS
 	select TICK_ONESHOT
 	select PLAT_PXA
+	select SPARSE_IRQ
 	help
 	  Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
 
@@ -679,8 +687,8 @@ config ARCH_S3C64XX
 	help
 	  Samsung S3C64XX series based systems
 
-config ARCH_S5P6440
-	bool "Samsung S5P6440"
+config ARCH_S5P64X0
+	bool "Samsung S5P6440 S5P6450"
 	select CPU_V6
 	select GENERIC_GPIO
 	select HAVE_CLK
@@ -689,7 +697,8 @@ config ARCH_S5P6440
 	select HAVE_S3C2410_I2C
 	select HAVE_S3C_RTC
 	help
-	  Samsung S5P6440 CPU based systems
+	  Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440,
+	  SMDK6450.
 
 config ARCH_S5P6442
 	bool "Samsung S5P6442"
@@ -748,6 +757,15 @@ config ARCH_SHARK
 	  Support for the StrongARM based Digital DNARD machine, also known
 	  as "Shark" (<http://www.shark-linux.de/shark.html>).
 
+config ARCH_TCC_926
+	bool "Telechips TCC ARM926-based systems"
+	select CPU_ARM926T
+	select HAVE_CLK
+	select COMMON_CLKDEV
+	select GENERIC_CLOCKEVENTS
+	help
+	  Support for Telechips TCC ARM926-based systems.
+
 config ARCH_LH7A40X
 	bool "Sharp LH7A40X"
 	select CPU_ARM922T
@@ -916,6 +934,8 @@ source "arch/arm/plat-s5p/Kconfig"
 
 source "arch/arm/plat-spear/Kconfig"
 
+source "arch/arm/plat-tcc/Kconfig"
+
 if ARCH_S3C2410
 source "arch/arm/mach-s3c2400/Kconfig"
 source "arch/arm/mach-s3c2410/Kconfig"
@@ -929,7 +949,7 @@ if ARCH_S3C64XX
 source "arch/arm/mach-s3c64xx/Kconfig"
 endif
 
-source "arch/arm/mach-s5p6440/Kconfig"
+source "arch/arm/mach-s5p64x0/Kconfig"
 
 source "arch/arm/mach-s5p6442/Kconfig"
 
@@ -1003,7 +1023,7 @@ endif
 
 config ARM_ERRATA_411920
 	bool "ARM errata: Invalidation of the Instruction Cache operation can fail"
-	depends on CPU_V6 && !SMP
+	depends on CPU_V6
 	help
 	  Invalidation of the Instruction Cache operation can
 	  fail. This erratum is present in 1136 (before r1p4), 1156 and 1176.
@@ -1182,13 +1202,13 @@ source "kernel/time/Kconfig"
 
 config SMP
 	bool "Symmetric Multi-Processing (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP ||\
-		 MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 ||\
-		 ARCH_S5PV310 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
+	depends on EXPERIMENTAL
 	depends on GENERIC_CLOCKEVENTS
+	depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \
+		 MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 ||\
+		 ARCH_S5PV310 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4
 	select USE_GENERIC_SMP_HELPERS
-	select HAVE_ARM_SCU if ARCH_REALVIEW || ARCH_OMAP4 || ARCH_S5PV310 ||\
-		 ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4
+	select HAVE_ARM_SCU
 	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If
@@ -1206,6 +1226,19 @@ config SMP
 
 	  If you don't know what to do here, say N.
 
+config SMP_ON_UP
+	bool "Allow booting SMP kernel on uniprocessor systems (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	depends on SMP && !XIP && !THUMB2_KERNEL
+	default y
+	help
+	  SMP kernels contain instructions which fail on non-SMP processors.
+	  Enabling this option allows the kernel to modify itself to make
+	  these instructions safe.  Disabling it allows about 1K of space
+	  savings.
+
+	  If you don't know what to do here, say Y.
+
 config HAVE_ARM_SCU
 	bool
 	depends on SMP
@@ -1256,12 +1289,9 @@ config HOTPLUG_CPU
 
 config LOCAL_TIMERS
 	bool "Use local timer interrupts"
-	depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || \
-		REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \
-		ARCH_S5PV310 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
+	depends on SMP
 	default y
-	select HAVE_ARM_TWD if ARCH_REALVIEW || ARCH_OMAP4 || ARCH_S5PV310 || \
-		ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS
+	select HAVE_ARM_TWD
 	help
 	  Enable support for local timers on SMP platforms, rather then the
 	  legacy IPI broadcast method.  Local timers allows the system
@@ -1272,7 +1302,7 @@ source kernel/Kconfig.preempt
 
 config HZ
 	int
-	default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440 || \
+	default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P64X0 || \
 		ARCH_S5P6442 || ARCH_S5PV210 || ARCH_S5PV310
 	default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
 	default AT91_TIMER_HZ if ARCH_AT91
@@ -1478,6 +1508,20 @@ config UACCESS_WITH_MEMCPY
 	  However, if the CPU data cache is using a write-allocate mode,
 	  this option is unlikely to provide any performance gain.
 
+config SECCOMP
+	bool
+	prompt "Enable seccomp to safely compute untrusted bytecode"
+	---help---
+	  This kernel feature is useful for number crunching applications
+	  that may need to compute untrusted bytecode during their
+	  execution. By using pipes or other transports made available to
+	  the process as file descriptors supporting the read/write
+	  syscalls, it's possible to isolate those applications in
+	  their own address space using seccomp. Once seccomp is
+	  enabled via prctl(PR_SET_SECCOMP), it cannot be disabled
+	  and the task is only allowed to execute a few safe syscalls
+	  defined by each seccomp mode.
+
 config CC_STACKPROTECTOR
 	bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)"
 	help
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 91344af75f3..2fd0b99afc4 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -2,6 +2,20 @@ menu "Kernel hacking"
 
 source "lib/Kconfig.debug"
 
+config STRICT_DEVMEM
+	bool "Filter access to /dev/mem"
+	depends on MMU
+	---help---
+	  If this option is disabled, you allow userspace (root) access to all
+	  of memory, including kernel and userspace memory. Accidental
+	  access to this is obviously disastrous, but specific access can
+	  be used by people debugging the kernel.
+
+	  If this option is switched on, the /dev/mem file only allows
+	  userspace access to memory mapped peripherals.
+
+          If in doubt, say Y.
+
 # RMK wants arm kernels compiled with frame pointers or stack unwinding.
 # If you know what you are doing and are willing to live without stack
 # traces, you can get a slightly smaller kernel by setting this option to
@@ -27,6 +41,11 @@ config ARM_UNWIND
 	  the performance is not affected. Currently, this feature
 	  only works with EABI compilers. If unsure say Y.
 
+config OLD_MCOUNT
+	bool
+	depends on FUNCTION_TRACER && FRAME_POINTER
+	default y
+
 config DEBUG_USER
 	bool "Verbose user fault messages"
 	help
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 59c1ce858fc..b87aed028ee 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -173,7 +173,7 @@ machine-$(CONFIG_ARCH_RPC)		:= rpc
 machine-$(CONFIG_ARCH_S3C2410)		:= s3c2410 s3c2400 s3c2412 s3c2416 s3c2440 s3c2443
 machine-$(CONFIG_ARCH_S3C24A0)		:= s3c24a0
 machine-$(CONFIG_ARCH_S3C64XX)		:= s3c64xx
-machine-$(CONFIG_ARCH_S5P6440)		:= s5p6440
+machine-$(CONFIG_ARCH_S5P64X0)		:= s5p64x0
 machine-$(CONFIG_ARCH_S5P6442)		:= s5p6442
 machine-$(CONFIG_ARCH_S5PC100)		:= s5pc100
 machine-$(CONFIG_ARCH_S5PV210)		:= s5pv210
@@ -183,6 +183,7 @@ machine-$(CONFIG_ARCH_SHARK)		:= shark
 machine-$(CONFIG_ARCH_SHMOBILE) 	:= shmobile
 machine-$(CONFIG_ARCH_STMP378X)		:= stmp378x
 machine-$(CONFIG_ARCH_STMP37XX)		:= stmp37xx
+machine-$(CONFIG_ARCH_TCC8K)		:= tcc8k
 machine-$(CONFIG_ARCH_TEGRA)		:= tegra
 machine-$(CONFIG_ARCH_U300)		:= u300
 machine-$(CONFIG_ARCH_U8500)		:= ux500
@@ -202,6 +203,7 @@ plat-$(CONFIG_ARCH_MXC)		:= mxc
 plat-$(CONFIG_ARCH_OMAP)	:= omap
 plat-$(CONFIG_ARCH_S3C64XX)	:= samsung
 plat-$(CONFIG_ARCH_STMP3XXX)	:= stmp3xxx
+plat-$(CONFIG_ARCH_TCC_926)	:= tcc
 plat-$(CONFIG_PLAT_IOP)		:= iop
 plat-$(CONFIG_PLAT_NOMADIK)	:= nomadik
 plat-$(CONFIG_PLAT_ORION)	:= orion
@@ -245,13 +247,14 @@ ifeq ($(FASTFPE),$(wildcard $(FASTFPE)))
 FASTFPE_OBJ	:=$(FASTFPE)/
 endif
 
-# If we have a machine-specific directory, then include it in the build.
-core-y				+= arch/arm/kernel/ arch/arm/mm/ arch/arm/common/
-core-y				+= $(machdirs) $(platdirs)
 core-$(CONFIG_FPE_NWFPE)	+= arch/arm/nwfpe/
 core-$(CONFIG_FPE_FASTFPE)	+= $(FASTFPE_OBJ)
 core-$(CONFIG_VFP)		+= arch/arm/vfp/
 
+# If we have a machine-specific directory, then include it in the build.
+core-y				+= arch/arm/kernel/ arch/arm/mm/ arch/arm/common/
+core-y				+= $(machdirs) $(platdirs)
+
 drivers-$(CONFIG_OPROFILE)      += arch/arm/oprofile/
 
 libs-y				:= arch/arm/lib/ $(libs-y)
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index 7dfa9a85bc0..ada6359160e 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -67,25 +67,11 @@ static inline unsigned int gic_irq(unsigned int irq)
 
 /*
  * Routines to acknowledge, disable and enable interrupts
- *
- * Linux assumes that when we're done with an interrupt we need to
- * unmask it, in the same way we need to unmask an interrupt when
- * we first enable it.
- *
- * The GIC has a separate notion of "end of interrupt" to re-enable
- * an interrupt after handling, in order to support hardware
- * prioritisation.
- *
- * We can make the GIC behave in the way that Linux expects by making
- * our "acknowledge" routine disable the interrupt, then mark it as
- * complete.
  */
 static void gic_ack_irq(unsigned int irq)
 {
-	u32 mask = 1 << (irq % 32);
 
 	spin_lock(&irq_controller_lock);
-	writel(mask, gic_dist_base(irq) + GIC_DIST_ENABLE_CLEAR + (gic_irq(irq) / 32) * 4);
 	writel(gic_irq(irq), gic_cpu_base(irq) + GIC_CPU_EOI);
 	spin_unlock(&irq_controller_lock);
 }
diff --git a/arch/arm/common/pl330.c b/arch/arm/common/pl330.c
index 5ebbab6242a..8f0f86db360 100644
--- a/arch/arm/common/pl330.c
+++ b/arch/arm/common/pl330.c
@@ -146,8 +146,7 @@
 #define DESIGNER	0x41
 #define REVISION	0x0
 #define INTEG_CFG	0x0
-#define PERIPH_ID_VAL	((PART << 0) | (DESIGNER << 12) \
-			  | (REVISION << 20) | (INTEG_CFG << 24))
+#define PERIPH_ID_VAL	((PART << 0) | (DESIGNER << 12))
 
 #define PCELL_ID_VAL	0xb105f00d
 
@@ -1859,10 +1858,10 @@ int pl330_add(struct pl330_info *pi)
 	regs = pi->base;
 
 	/* Check if we can handle this DMAC */
-	if (get_id(pi, PERIPH_ID) != PERIPH_ID_VAL
+	if ((get_id(pi, PERIPH_ID) & 0xfffff) != PERIPH_ID_VAL
 	   || get_id(pi, PCELL_ID) != PCELL_ID_VAL) {
 		dev_err(pi->dev, "PERIPH_ID 0x%x, PCELL_ID 0x%x !\n",
-			readl(regs + PERIPH_ID), readl(regs + PCELL_ID));
+			get_id(pi, PERIPH_ID), get_id(pi, PCELL_ID));
 		return -EINVAL;
 	}
 
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index 517d50ddbeb..c0258a8c103 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -678,7 +678,7 @@ out:
  *	%-EBUSY		physical address already marked in-use.
  *	%0		successful.
  */
-static int
+static int __devinit
 __sa1111_probe(struct device *me, struct resource *mem, int irq)
 {
 	struct sa1111 *sachip;
diff --git a/arch/arm/configs/at91sam9g20ek_defconfig b/arch/arm/configs/at91sam9g20ek_defconfig
index f1bac70d6ce..9e90e6d7929 100644
--- a/arch/arm/configs/at91sam9g20ek_defconfig
+++ b/arch/arm/configs/at91sam9g20ek_defconfig
@@ -13,6 +13,7 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91SAM9G20=y
 CONFIG_MACH_AT91SAM9G20EK=y
+CONFIG_MACH_AT91SAM9G20EK_2MMC=y
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 # CONFIG_ARM_THUMB is not set
 CONFIG_AEABI=y
diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index ccc9c9959b8..2f704281376 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -15,6 +15,7 @@ CONFIG_MACH_MV88F6281GTW_GE=y
 CONFIG_MACH_SHEEVAPLUG=y
 CONFIG_MACH_ESATA_SHEEVAPLUG=y
 CONFIG_MACH_GURUPLUG=y
+CONFIG_MACH_DOCKSTAR=y
 CONFIG_MACH_TS219=y
 CONFIG_MACH_TS41X=y
 CONFIG_MACH_OPENRD_BASE=y
diff --git a/arch/arm/configs/mx27_defconfig b/arch/arm/configs/mx27_defconfig
index b2038b0e266..813cfb366c1 100644
--- a/arch/arm/configs/mx27_defconfig
+++ b/arch/arm/configs/mx27_defconfig
@@ -21,8 +21,14 @@ CONFIG_ARCH_MX2=y
 CONFIG_MACH_MX27=y
 CONFIG_MACH_MX27ADS=y
 CONFIG_MACH_PCM038=y
+CONFIG_MACH_CPUIMX27=y
+CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2=y
+CONFIG_MACH_EUKREA_CPUIMX27_USEUART4=y
 CONFIG_MACH_MX27_3DS=y
+CONFIG_MACH_IMX27_VISSTRIM_M10=y
 CONFIG_MACH_IMX27LITE=y
+CONFIG_MACH_PCA100=y
+CONFIG_MACH_MXT_TD60=y
 CONFIG_MXC_IRQ_PRIOR=y
 CONFIG_MXC_PWM=y
 CONFIG_NO_HZ=y
@@ -76,7 +82,9 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=m
 # CONFIG_SERIO is not set
+CONFIG_SERIAL_8250=m
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
 # CONFIG_LEGACY_PTYS is not set
@@ -85,19 +93,20 @@ CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_IMX=y
 CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
+CONFIG_SPI_IMX=y
 CONFIG_W1=y
 CONFIG_W1_MASTER_MXC=y
 CONFIG_W1_SLAVE_THERM=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y
 CONFIG_FB_IMX=y
-# CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 # CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
+CONFIG_USB=m
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_ULPI=y
 CONFIG_MMC=y
 CONFIG_MMC_MXC=y
 CONFIG_RTC_CLASS=y
diff --git a/arch/arm/configs/mx31pdk_defconfig b/arch/arm/configs/mx31pdk_defconfig
deleted file mode 100644
index 2d29329749e..00000000000
--- a/arch/arm/configs/mx31pdk_defconfig
+++ /dev/null
@@ -1,44 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_COMPAT_BRK is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_MXC=y
-# CONFIG_MACH_MX31ADS is not set
-CONFIG_MACH_MX31_3DS=y
-CONFIG_AEABI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_LRO is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRC32 is not set
diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig
index 161f907b611..f0c339fd5d2 100644
--- a/arch/arm/configs/mx3_defconfig
+++ b/arch/arm/configs/mx3_defconfig
@@ -24,6 +24,7 @@ CONFIG_MACH_PCM043=y
 CONFIG_MACH_ARMADILLO5X0=y
 CONFIG_MACH_MX35_3DS=y
 CONFIG_MACH_KZM_ARM11_01=y
+CONFIG_MACH_EUKREA_CPUIMX35=y
 CONFIG_MXC_IRQ_PRIOR=y
 CONFIG_MXC_PWM=y
 CONFIG_NO_HZ=y
@@ -108,7 +109,6 @@ CONFIG_MMC=y
 CONFIG_MMC_MXC=y
 CONFIG_DMADEVICES=y
 # CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_UBIFS_FS=y
diff --git a/arch/arm/configs/mx51_defconfig b/arch/arm/configs/mx51_defconfig
index a665ecbbe2b..163cfee7644 100644
--- a/arch/arm/configs/mx51_defconfig
+++ b/arch/arm/configs/mx51_defconfig
@@ -15,6 +15,8 @@ CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_ARCH_MXC=y
 CONFIG_ARCH_MX5=y
 CONFIG_MACH_MX51_BABBAGE=y
+CONFIG_MACH_MX51_3DS=y
+CONFIG_MACH_EUKREA_CPUIMX51=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT_VOLUNTARY=y
@@ -69,7 +71,6 @@ CONFIG_REALTEK_PHY=y
 CONFIG_NATIONAL_PHY=y
 CONFIG_STE10XP=y
 CONFIG_LSI_ET1011C_PHY=y
-CONFIG_FIXED_PHY=y
 CONFIG_MDIO_BITBANG=y
 CONFIG_MDIO_GPIO=y
 CONFIG_NET_ETHERNET=y
@@ -100,7 +101,6 @@ CONFIG_I2C_ALGOPCF=m
 CONFIG_I2C_ALGOPCA=m
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
 # CONFIG_HID_SUPPORT is not set
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
@@ -117,13 +117,11 @@ CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
 CONFIG_EXT4_FS=y
 CONFIG_EXT4_FS_POSIX_ACL=y
 CONFIG_EXT4_FS_SECURITY=y
-CONFIG_INOTIFY=y
 CONFIG_QUOTA=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
@@ -136,6 +134,7 @@ CONFIG_ZISOFS=y
 CONFIG_UDF_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
 CONFIG_CONFIGFS_FS=m
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -151,7 +150,6 @@ CONFIG_NLS_UTF8=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DETECT_SOFTLOCKUP is not set
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -159,7 +157,6 @@ CONFIG_DEBUG_KERNEL=y
 # CONFIG_ARM_UNWIND is not set
 CONFIG_DEBUG_LL=y
 CONFIG_EARLY_PRINTK=y
-CONFIG_KEYS=y
 CONFIG_SECURITYFS=y
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_LZO=y
diff --git a/arch/arm/configs/realview-smp_defconfig b/arch/arm/configs/realview-smp_defconfig
index 9312ef9f9bf..5ca7a61f7c0 100644
--- a/arch/arm/configs/realview-smp_defconfig
+++ b/arch/arm/configs/realview-smp_defconfig
@@ -39,6 +39,7 @@ CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_ARM_INTEGRATOR=y
+CONFIG_ARM_CHARLCD=y
 CONFIG_NETDEVICES=y
 CONFIG_SMSC_PHY=y
 CONFIG_NET_ETHERNET=y
@@ -52,10 +53,13 @@ CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_VERSATILE=y
+CONFIG_SPI=y
+CONFIG_GPIOLIB=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y
 CONFIG_FB_ARMCLCD=y
-# CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
@@ -70,7 +74,13 @@ CONFIG_SND_ARMAACI=y
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
 CONFIG_MMC_ARMMMCI=y
-CONFIG_INOTIFY=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_DS1307=y
+CONFIG_RTC_DRV_PL031=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
@@ -80,6 +90,7 @@ CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
diff --git a/arch/arm/configs/realview_defconfig b/arch/arm/configs/realview_defconfig
index fb75192ee7e..fcaa6032805 100644
--- a/arch/arm/configs/realview_defconfig
+++ b/arch/arm/configs/realview_defconfig
@@ -38,6 +38,7 @@ CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_ARM_INTEGRATOR=y
+CONFIG_ARM_CHARLCD=y
 CONFIG_NETDEVICES=y
 CONFIG_SMSC_PHY=y
 CONFIG_NET_ETHERNET=y
@@ -51,10 +52,13 @@ CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_VERSATILE=y
+CONFIG_SPI=y
+CONFIG_GPIOLIB=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y
 CONFIG_FB_ARMCLCD=y
-# CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
@@ -69,7 +73,13 @@ CONFIG_SND_ARMAACI=y
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
 CONFIG_MMC_ARMMMCI=y
-CONFIG_INOTIFY=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_DS1307=y
+CONFIG_RTC_DRV_PL031=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
@@ -79,6 +89,7 @@ CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
diff --git a/arch/arm/configs/s5p6440_defconfig b/arch/arm/configs/s5p64x0_defconfig
index 0b0266c6d32..2993ecd3514 100644
--- a/arch/arm/configs/s5p6440_defconfig
+++ b/arch/arm/configs/s5p64x0_defconfig
@@ -5,10 +5,11 @@ CONFIG_KALLSYMS_ALL=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_S5P6440=y
+CONFIG_ARCH_S5P64X0=y
 CONFIG_S3C_BOOT_ERROR_RESET=y
 CONFIG_S3C_LOWLEVEL_UART_PORT=1
 CONFIG_MACH_SMDK6440=y
+CONFIG_MACH_SMDK6450=y
 CONFIG_CPU_32v6K=y
 CONFIG_AEABI=y
 CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig
index 46e5e074726..c1c252cdca6 100644
--- a/arch/arm/configs/u300_defconfig
+++ b/arch/arm/configs/u300_defconfig
@@ -28,26 +28,9 @@ CONFIG_CPU_IDLE=y
 CONFIG_FPE_NWFPE=y
 CONFIG_PM=y
 # CONFIG_SUSPEND is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC_SMC=y
+# CONFIG_MISC_DEVICES is not set
 # CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set
@@ -58,7 +41,6 @@ CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
-CONFIG_POWER_SUPPLY=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_REGULATOR=y
@@ -66,24 +48,10 @@ CONFIG_FB=y
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_SPI is not set
-CONFIG_SND_SOC=y
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-CONFIG_MMC_DEBUG=y
 CONFIG_MMC_ARMMMCI=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
 CONFIG_RTC_DRV_COH901331=y
@@ -93,12 +61,11 @@ CONFIG_COH901318=y
 CONFIG_FUSE_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
-# CONFIG_NETWORK_FILESYSTEMS is not set
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DETECT_SOFTLOCKUP is not set
 # CONFIG_SCHED_DEBUG is not set
 CONFIG_TIMER_STATS=y
 # CONFIG_DEBUG_PREEMPT is not set
diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 6e8f05c8a1c..062b58c029a 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -154,16 +154,39 @@
 	.long	9999b,9001f;			\
 	.popsection
 
+#ifdef CONFIG_SMP
+#define ALT_SMP(instr...)					\
+9998:	instr
+#define ALT_UP(instr...)					\
+	.pushsection ".alt.smp.init", "a"			;\
+	.long	9998b						;\
+	instr							;\
+	.popsection
+#define ALT_UP_B(label)					\
+	.equ	up_b_offset, label - 9998b			;\
+	.pushsection ".alt.smp.init", "a"			;\
+	.long	9998b						;\
+	b	. + up_b_offset					;\
+	.popsection
+#else
+#define ALT_SMP(instr...)
+#define ALT_UP(instr...) instr
+#define ALT_UP_B(label) b label
+#endif
+
 /*
  * SMP data memory barrier
  */
 	.macro	smp_dmb
 #ifdef CONFIG_SMP
 #if __LINUX_ARM_ARCH__ >= 7
-	dmb
+	ALT_SMP(dmb)
 #elif __LINUX_ARM_ARCH__ == 6
-	mcr	p15, 0, r0, c7, c10, 5	@ dmb
+	ALT_SMP(mcr	p15, 0, r0, c7, c10, 5)	@ dmb
+#else
+#error Incompatible SMP platform
 #endif
+	ALT_UP(nop)
 #endif
 	.endm
 
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index 4656a24058d..3acd8fa25e3 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -137,10 +137,10 @@
 #endif
 
 /*
- * This flag is used to indicate that the page pointed to by a pte
- * is dirty and requires cleaning before returning it to the user.
+ * This flag is used to indicate that the page pointed to by a pte is clean
+ * and does not require cleaning before returning it to the user.
  */
-#define PG_dcache_dirty PG_arch_1
+#define PG_dcache_clean PG_arch_1
 
 /*
  *	MM Cache Management
@@ -156,6 +156,12 @@
  *	Please note that the implementation of these, and the required
  *	effects are cache-type (VIVT/VIPT/PIPT) specific.
  *
+ *	flush_icache_all()
+ *
+ *		Unconditionally clean and invalidate the entire icache.
+ *		Currently only needed for cache-v6.S and cache-v7.S, see
+ *		__flush_icache_all for the generic implementation.
+ *
  *	flush_kern_all()
  *
  *		Unconditionally clean and invalidate the entire cache.
@@ -206,6 +212,7 @@
  */
 
 struct cpu_cache_fns {
+	void (*flush_icache_all)(void);
 	void (*flush_kern_all)(void);
 	void (*flush_user_all)(void);
 	void (*flush_user_range)(unsigned long, unsigned long, unsigned int);
@@ -227,6 +234,7 @@ struct cpu_cache_fns {
 
 extern struct cpu_cache_fns cpu_cache;
 
+#define __cpuc_flush_icache_all		cpu_cache.flush_icache_all
 #define __cpuc_flush_kern_all		cpu_cache.flush_kern_all
 #define __cpuc_flush_user_all		cpu_cache.flush_user_all
 #define __cpuc_flush_user_range		cpu_cache.flush_user_range
@@ -246,6 +254,7 @@ extern struct cpu_cache_fns cpu_cache;
 
 #else
 
+#define __cpuc_flush_icache_all		__glue(_CACHE,_flush_icache_all)
 #define __cpuc_flush_kern_all		__glue(_CACHE,_flush_kern_cache_all)
 #define __cpuc_flush_user_all		__glue(_CACHE,_flush_user_cache_all)
 #define __cpuc_flush_user_range		__glue(_CACHE,_flush_user_cache_range)
@@ -253,6 +262,7 @@ extern struct cpu_cache_fns cpu_cache;
 #define __cpuc_coherent_user_range	__glue(_CACHE,_coherent_user_range)
 #define __cpuc_flush_dcache_area	__glue(_CACHE,_flush_kern_dcache_area)
 
+extern void __cpuc_flush_icache_all(void);
 extern void __cpuc_flush_kern_all(void);
 extern void __cpuc_flush_user_all(void);
 extern void __cpuc_flush_user_range(unsigned long, unsigned long, unsigned int);
@@ -291,6 +301,37 @@ extern void copy_to_user_page(struct vm_area_struct *, struct page *,
 /*
  * Convert calls to our calling convention.
  */
+
+/* Invalidate I-cache */
+#define __flush_icache_all_generic()					\
+	asm("mcr	p15, 0, %0, c7, c5, 0"				\
+	    : : "r" (0));
+
+/* Invalidate I-cache inner shareable */
+#define __flush_icache_all_v7_smp()					\
+	asm("mcr	p15, 0, %0, c7, c1, 0"				\
+	    : : "r" (0));
+
+/*
+ * Optimized __flush_icache_all for the common cases. Note that UP ARMv7
+ * will fall through to use __flush_icache_all_generic.
+ */
+#if (defined(CONFIG_CPU_V7) && defined(CONFIG_CPU_V6)) ||		\
+	defined(CONFIG_SMP_ON_UP)
+#define __flush_icache_preferred	__cpuc_flush_icache_all
+#elif __LINUX_ARM_ARCH__ >= 7 && defined(CONFIG_SMP)
+#define __flush_icache_preferred	__flush_icache_all_v7_smp
+#elif __LINUX_ARM_ARCH__ == 6 && defined(CONFIG_ARM_ERRATA_411920)
+#define __flush_icache_preferred	__cpuc_flush_icache_all
+#else
+#define __flush_icache_preferred	__flush_icache_all_generic
+#endif
+
+static inline void __flush_icache_all(void)
+{
+	__flush_icache_preferred();
+}
+
 #define flush_cache_all()		__cpuc_flush_kern_all()
 
 static inline void vivt_flush_cache_mm(struct mm_struct *mm)
@@ -366,21 +407,6 @@ extern void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr
 #define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
 extern void flush_dcache_page(struct page *);
 
-static inline void __flush_icache_all(void)
-{
-#ifdef CONFIG_ARM_ERRATA_411920
-	extern void v6_icache_inval_all(void);
-	v6_icache_inval_all();
-#elif defined(CONFIG_SMP) && __LINUX_ARM_ARCH__ >= 7
-	asm("mcr	p15, 0, %0, c7, c1, 0	@ invalidate I-cache inner shareable\n"
-	    :
-	    : "r" (0));
-#else
-	asm("mcr	p15, 0, %0, c7, c5, 0	@ invalidate I-cache\n"
-	    :
-	    : "r" (0));
-#endif
-}
 static inline void flush_kernel_vmap_range(void *addr, int size)
 {
 	if ((cache_is_vivt() || cache_is_vipt_aliasing()))
@@ -405,9 +431,6 @@ static inline void flush_anon_page(struct vm_area_struct *vma,
 #define ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE
 static inline void flush_kernel_dcache_page(struct page *page)
 {
-	/* highmem pages are always flushed upon kunmap already */
-	if ((cache_is_vivt() || cache_is_vipt_aliasing()) && !PageHighMem(page))
-		__cpuc_flush_dcache_area(page_address(page), PAGE_SIZE);
 }
 
 #define flush_dcache_mmap_lock(mapping) \
diff --git a/arch/arm/include/asm/cachetype.h b/arch/arm/include/asm/cachetype.h
index d3a4c2cb9f2..c023db09fcc 100644
--- a/arch/arm/include/asm/cachetype.h
+++ b/arch/arm/include/asm/cachetype.h
@@ -6,6 +6,7 @@
 #define CACHEID_VIPT_ALIASING		(1 << 2)
 #define CACHEID_VIPT			(CACHEID_VIPT_ALIASING|CACHEID_VIPT_NONALIASING)
 #define CACHEID_ASID_TAGGED		(1 << 3)
+#define CACHEID_VIPT_I_ALIASING		(1 << 4)
 
 extern unsigned int cacheid;
 
@@ -14,15 +15,18 @@ extern unsigned int cacheid;
 #define cache_is_vipt_nonaliasing()	cacheid_is(CACHEID_VIPT_NONALIASING)
 #define cache_is_vipt_aliasing()	cacheid_is(CACHEID_VIPT_ALIASING)
 #define icache_is_vivt_asid_tagged()	cacheid_is(CACHEID_ASID_TAGGED)
+#define icache_is_vipt_aliasing()	cacheid_is(CACHEID_VIPT_I_ALIASING)
 
 /*
  * __LINUX_ARM_ARCH__ is the minimum supported CPU architecture
  * Mask out support which will never be present on newer CPUs.
  * - v6+ is never VIVT
- * - v7+ VIPT never aliases
+ * - v7+ VIPT never aliases on D-side
  */
 #if __LINUX_ARM_ARCH__ >= 7
-#define __CACHEID_ARCH_MIN	(CACHEID_VIPT_NONALIASING | CACHEID_ASID_TAGGED)
+#define __CACHEID_ARCH_MIN	(CACHEID_VIPT_NONALIASING |\
+				 CACHEID_ASID_TAGGED |\
+				 CACHEID_VIPT_I_ALIASING)
 #elif __LINUX_ARM_ARCH__ >= 6
 #define	__CACHEID_ARCH_MIN	(~CACHEID_VIVT)
 #else
diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
index 5747a8baa41..8bb66bca2e3 100644
--- a/arch/arm/include/asm/elf.h
+++ b/arch/arm/include/asm/elf.h
@@ -127,4 +127,8 @@ struct mm_struct;
 extern unsigned long arch_randomize_brk(struct mm_struct *mm);
 #define arch_randomize_brk arch_randomize_brk
 
+extern int vectors_user_mapping(void);
+#define arch_setup_additional_pages(bprm, uses_interp) vectors_user_mapping()
+#define ARCH_HAS_SETUP_ADDITIONAL_PAGES
+
 #endif
diff --git a/arch/arm/include/asm/ftrace.h b/arch/arm/include/asm/ftrace.h
index 103f7ee9731..f89515adac6 100644
--- a/arch/arm/include/asm/ftrace.h
+++ b/arch/arm/include/asm/ftrace.h
@@ -2,12 +2,30 @@
 #define _ASM_ARM_FTRACE
 
 #ifdef CONFIG_FUNCTION_TRACER
-#define MCOUNT_ADDR		((long)(mcount))
+#define MCOUNT_ADDR		((unsigned long)(__gnu_mcount_nc))
 #define MCOUNT_INSN_SIZE	4 /* sizeof mcount call */
 
 #ifndef __ASSEMBLY__
 extern void mcount(void);
 extern void __gnu_mcount_nc(void);
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+struct dyn_arch_ftrace {
+#ifdef CONFIG_OLD_MCOUNT
+	bool	old_mcount;
+#endif
+};
+
+static inline unsigned long ftrace_call_adjust(unsigned long addr)
+{
+	/* With Thumb-2, the recorded addresses have the lsb set */
+	return addr & ~1;
+}
+
+extern void ftrace_caller_old(void);
+extern void ftrace_call_old(void);
+#endif
+
 #endif
 
 #endif
diff --git a/arch/arm/include/asm/hardware/coresight.h b/arch/arm/include/asm/hardware/coresight.h
index 212e47828c7..7ecd793b8f5 100644
--- a/arch/arm/include/asm/hardware/coresight.h
+++ b/arch/arm/include/asm/hardware/coresight.h
@@ -21,18 +21,6 @@
 #define TRACER_RUNNING		BIT(TRACER_RUNNING_BIT)
 #define TRACER_CYCLE_ACC	BIT(TRACER_CYCLE_ACC_BIT)
 
-struct tracectx {
-	unsigned int	etb_bufsz;
-	void __iomem	*etb_regs;
-	void __iomem	*etm_regs;
-	unsigned long	flags;
-	int		ncmppairs;
-	int		etm_portsz;
-	struct device	*dev;
-	struct clk	*emu_clk;
-	struct mutex	mutex;
-};
-
 #define TRACER_TIMEOUT 10000
 
 #define etm_writel(t, v, x) \
@@ -112,10 +100,10 @@ struct tracectx {
 
 /* ETM status register, "ETM Architecture", 3.3.2 */
 #define ETMR_STATUS		(0x10)
-#define ETMST_OVERFLOW		(1 << 0)
-#define ETMST_PROGBIT		(1 << 1)
-#define ETMST_STARTSTOP		(1 << 2)
-#define ETMST_TRIGGER		(1 << 3)
+#define ETMST_OVERFLOW		BIT(0)
+#define ETMST_PROGBIT		BIT(1)
+#define ETMST_STARTSTOP		BIT(2)
+#define ETMST_TRIGGER		BIT(3)
 
 #define etm_progbit(t)		(etm_readl((t), ETMR_STATUS) & ETMST_PROGBIT)
 #define etm_started(t)		(etm_readl((t), ETMR_STATUS) & ETMST_STARTSTOP)
@@ -123,7 +111,7 @@ struct tracectx {
 
 #define ETMR_TRACEENCTRL2	0x1c
 #define ETMR_TRACEENCTRL	0x24
-#define ETMTE_INCLEXCL		(1 << 24)
+#define ETMTE_INCLEXCL		BIT(24)
 #define ETMR_TRACEENEVT		0x20
 #define ETMCTRL_OPTS		(ETMCTRL_DO_CPRT | \
 				ETMCTRL_DATA_DO_ADDR | \
@@ -146,12 +134,12 @@ struct tracectx {
 #define ETBR_CTRL		0x20
 #define ETBR_FORMATTERCTRL	0x304
 #define ETBFF_ENFTC		1
-#define ETBFF_ENFCONT		(1 << 1)
-#define ETBFF_FONFLIN		(1 << 4)
-#define ETBFF_MANUAL_FLUSH	(1 << 6)
-#define ETBFF_TRIGIN		(1 << 8)
-#define ETBFF_TRIGEVT		(1 << 9)
-#define ETBFF_TRIGFL		(1 << 10)
+#define ETBFF_ENFCONT		BIT(1)
+#define ETBFF_FONFLIN		BIT(4)
+#define ETBFF_MANUAL_FLUSH	BIT(6)
+#define ETBFF_TRIGIN		BIT(8)
+#define ETBFF_TRIGEVT		BIT(9)
+#define ETBFF_TRIGFL		BIT(10)
 
 #define etb_writel(t, v, x) \
 	(__raw_writel((v), (t)->etb_regs + (x)))
diff --git a/arch/arm/include/asm/hw_breakpoint.h b/arch/arm/include/asm/hw_breakpoint.h
new file mode 100644
index 00000000000..4d8ae9d67ab
--- /dev/null
+++ b/arch/arm/include/asm/hw_breakpoint.h
@@ -0,0 +1,133 @@
+#ifndef _ARM_HW_BREAKPOINT_H
+#define _ARM_HW_BREAKPOINT_H
+
+#ifdef __KERNEL__
+
+struct task_struct;
+
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+
+struct arch_hw_breakpoint_ctrl {
+		u32 __reserved	: 9,
+		mismatch	: 1,
+				: 9,
+		len		: 8,
+		type		: 2,
+		privilege	: 2,
+		enabled		: 1;
+};
+
+struct arch_hw_breakpoint {
+	u32	address;
+	u32	trigger;
+	struct perf_event *suspended_wp;
+	struct arch_hw_breakpoint_ctrl ctrl;
+};
+
+static inline u32 encode_ctrl_reg(struct arch_hw_breakpoint_ctrl ctrl)
+{
+	return (ctrl.mismatch << 22) | (ctrl.len << 5) | (ctrl.type << 3) |
+		(ctrl.privilege << 1) | ctrl.enabled;
+}
+
+static inline void decode_ctrl_reg(u32 reg,
+				   struct arch_hw_breakpoint_ctrl *ctrl)
+{
+	ctrl->enabled	= reg & 0x1;
+	reg >>= 1;
+	ctrl->privilege	= reg & 0x3;
+	reg >>= 2;
+	ctrl->type	= reg & 0x3;
+	reg >>= 2;
+	ctrl->len	= reg & 0xff;
+	reg >>= 17;
+	ctrl->mismatch	= reg & 0x1;
+}
+
+/* Debug architecture numbers. */
+#define ARM_DEBUG_ARCH_RESERVED	0	/* In case of ptrace ABI updates. */
+#define ARM_DEBUG_ARCH_V6	1
+#define ARM_DEBUG_ARCH_V6_1	2
+#define ARM_DEBUG_ARCH_V7_ECP14	3
+#define ARM_DEBUG_ARCH_V7_MM	4
+
+/* Breakpoint */
+#define ARM_BREAKPOINT_EXECUTE	0
+
+/* Watchpoints */
+#define ARM_BREAKPOINT_LOAD	1
+#define ARM_BREAKPOINT_STORE	2
+
+/* Privilege Levels */
+#define ARM_BREAKPOINT_PRIV	1
+#define ARM_BREAKPOINT_USER	2
+
+/* Lengths */
+#define ARM_BREAKPOINT_LEN_1	0x1
+#define ARM_BREAKPOINT_LEN_2	0x3
+#define ARM_BREAKPOINT_LEN_4	0xf
+#define ARM_BREAKPOINT_LEN_8	0xff
+
+/* Limits */
+#define ARM_MAX_BRP		16
+#define ARM_MAX_WRP		16
+#define ARM_MAX_HBP_SLOTS	(ARM_MAX_BRP + ARM_MAX_WRP)
+
+/* DSCR method of entry bits. */
+#define ARM_DSCR_MOE(x)			((x >> 2) & 0xf)
+#define ARM_ENTRY_BREAKPOINT		0x1
+#define ARM_ENTRY_ASYNC_WATCHPOINT	0x2
+#define ARM_ENTRY_SYNC_WATCHPOINT	0xa
+
+/* DSCR monitor/halting bits. */
+#define ARM_DSCR_HDBGEN		(1 << 14)
+#define ARM_DSCR_MDBGEN		(1 << 15)
+
+/* opcode2 numbers for the co-processor instructions. */
+#define ARM_OP2_BVR		4
+#define ARM_OP2_BCR		5
+#define ARM_OP2_WVR		6
+#define ARM_OP2_WCR		7
+
+/* Base register numbers for the debug registers. */
+#define ARM_BASE_BVR		64
+#define ARM_BASE_BCR		80
+#define ARM_BASE_WVR		96
+#define ARM_BASE_WCR		112
+
+/* Accessor macros for the debug registers. */
+#define ARM_DBG_READ(M, OP2, VAL) do {\
+	asm volatile("mrc p14, 0, %0, c0," #M ", " #OP2 : "=r" (VAL));\
+} while (0)
+
+#define ARM_DBG_WRITE(M, OP2, VAL) do {\
+	asm volatile("mcr p14, 0, %0, c0," #M ", " #OP2 : : "r" (VAL));\
+} while (0)
+
+struct notifier_block;
+struct perf_event;
+struct pmu;
+
+extern struct pmu perf_ops_bp;
+extern int arch_bp_generic_fields(struct arch_hw_breakpoint_ctrl ctrl,
+				  int *gen_len, int *gen_type);
+extern int arch_check_bp_in_kernelspace(struct perf_event *bp);
+extern int arch_validate_hwbkpt_settings(struct perf_event *bp);
+extern int hw_breakpoint_exceptions_notify(struct notifier_block *unused,
+					   unsigned long val, void *data);
+
+extern u8 arch_get_debug_arch(void);
+extern u8 arch_get_max_wp_len(void);
+extern void clear_ptrace_hw_breakpoint(struct task_struct *tsk);
+
+int arch_install_hw_breakpoint(struct perf_event *bp);
+void arch_uninstall_hw_breakpoint(struct perf_event *bp);
+void hw_breakpoint_pmu_read(struct perf_event *bp);
+int hw_breakpoint_slots(int type);
+
+#else
+static inline void clear_ptrace_hw_breakpoint(struct task_struct *tsk) {}
+
+#endif	/* CONFIG_HAVE_HW_BREAKPOINT */
+#endif	/* __KERNEL__ */
+#endif	/* _ARM_HW_BREAKPOINT_H */
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
index 1261b1f928d..815efa2d4e0 100644
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -294,6 +294,7 @@ extern void pci_iounmap(struct pci_dev *dev, void __iomem *addr);
 #define ARCH_HAS_VALID_PHYS_ADDR_RANGE
 extern int valid_phys_addr_range(unsigned long addr, size_t size);
 extern int valid_mmap_phys_addr_range(unsigned long pfn, size_t size);
+extern int devmem_is_allowed(unsigned long pfn);
 #endif
 
 /*
diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
index 8a0dd18ba64..d97a964207f 100644
--- a/arch/arm/include/asm/mach/arch.h
+++ b/arch/arm/include/asm/mach/arch.h
@@ -16,18 +16,15 @@ struct sys_timer;
 
 struct machine_desc {
 	/*
-	 * Note! The first four elements are used
+	 * Note! The first two elements are used
 	 * by assembler code in head.S, head-common.S
 	 */
 	unsigned int		nr;		/* architecture number	*/
-	unsigned int		nr_irqs;	/* number of IRQs */
-	unsigned int		phys_io;	/* start of physical io	*/
-	unsigned int		io_pg_offst;	/* byte offset for io 
-						 * page tabe entry	*/
-
 	const char		*name;		/* architecture name	*/
 	unsigned long		boot_params;	/* tagged list		*/
 
+	unsigned int		nr_irqs;	/* number of IRQs */
+
 	unsigned int		video_start;	/* start of video RAM	*/
 	unsigned int		video_end;	/* end of video RAM	*/
 
diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h
index a0b3cac0547..71605d9f8e4 100644
--- a/arch/arm/include/asm/mmu_context.h
+++ b/arch/arm/include/asm/mmu_context.h
@@ -18,7 +18,6 @@
 #include <asm/cacheflush.h>
 #include <asm/cachetype.h>
 #include <asm/proc-fns.h>
-#include <asm-generic/mm_hooks.h>
 
 void __check_kvm_seq(struct mm_struct *mm);
 
@@ -134,4 +133,32 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next,
 #define deactivate_mm(tsk,mm)	do { } while (0)
 #define activate_mm(prev,next)	switch_mm(prev, next, NULL)
 
+/*
+ * We are inserting a "fake" vma for the user-accessible vector page so
+ * gdb and friends can get to it through ptrace and /proc/<pid>/mem.
+ * But we also want to remove it before the generic code gets to see it
+ * during process exit or the unmapping of it would  cause total havoc.
+ * (the macro is used as remove_vma() is static to mm/mmap.c)
+ */
+#define arch_exit_mmap(mm) \
+do { \
+	struct vm_area_struct *high_vma = find_vma(mm, 0xffff0000); \
+	if (high_vma) { \
+		BUG_ON(high_vma->vm_next);  /* it should be last */ \
+		if (high_vma->vm_prev) \
+			high_vma->vm_prev->vm_next = NULL; \
+		else \
+			mm->mmap = NULL; \
+		rb_erase(&high_vma->vm_rb, &mm->mm_rb); \
+		mm->mmap_cache = NULL; \
+		mm->map_count--; \
+		remove_vma(high_vma); \
+	} \
+} while (0)
+
+static inline void arch_dup_mmap(struct mm_struct *oldmm,
+				 struct mm_struct *mm)
+{
+}
+
 #endif
diff --git a/arch/arm/include/asm/module.h b/arch/arm/include/asm/module.h
index e4dfa69abb6..cbb0bc295d2 100644
--- a/arch/arm/include/asm/module.h
+++ b/arch/arm/include/asm/module.h
@@ -7,20 +7,27 @@
 
 struct unwind_table;
 
-struct mod_arch_specific
-{
 #ifdef CONFIG_ARM_UNWIND
-	Elf_Shdr *unw_sec_init;
-	Elf_Shdr *unw_sec_devinit;
-	Elf_Shdr *unw_sec_core;
-	Elf_Shdr *sec_init_text;
-	Elf_Shdr *sec_devinit_text;
-	Elf_Shdr *sec_core_text;
-	struct unwind_table *unwind_init;
-	struct unwind_table *unwind_devinit;
-	struct unwind_table *unwind_core;
-#endif
+struct arm_unwind_mapping {
+	Elf_Shdr *unw_sec;
+	Elf_Shdr *sec_text;
+	struct unwind_table *unwind;
+};
+enum {
+	ARM_SEC_INIT,
+	ARM_SEC_DEVINIT,
+	ARM_SEC_CORE,
+	ARM_SEC_EXIT,
+	ARM_SEC_DEVEXIT,
+	ARM_SEC_MAX,
+};
+struct mod_arch_specific {
+	struct arm_unwind_mapping map[ARM_SEC_MAX];
 };
+#else
+struct mod_arch_specific {
+};
+#endif
 
 /*
  * Include the ARM architecture version.
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index e90b167ea84..a9672e8406a 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -278,9 +278,24 @@ extern struct page *empty_zero_page;
 
 #define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext)
 
-#define set_pte_at(mm,addr,ptep,pteval) do { \
-	set_pte_ext(ptep, pteval, (addr) >= TASK_SIZE ? 0 : PTE_EXT_NG); \
- } while (0)
+#if __LINUX_ARM_ARCH__ < 6
+static inline void __sync_icache_dcache(pte_t pteval)
+{
+}
+#else
+extern void __sync_icache_dcache(pte_t pteval);
+#endif
+
+static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
+			      pte_t *ptep, pte_t pteval)
+{
+	if (addr >= TASK_SIZE)
+		set_pte_ext(ptep, pteval, 0);
+	else {
+		__sync_icache_dcache(pteval);
+		set_pte_ext(ptep, pteval, PTE_EXT_NG);
+	}
+}
 
 /*
  * The following only work if pte_present() is true.
@@ -290,8 +305,13 @@ extern struct page *empty_zero_page;
 #define pte_write(pte)		(pte_val(pte) & L_PTE_WRITE)
 #define pte_dirty(pte)		(pte_val(pte) & L_PTE_DIRTY)
 #define pte_young(pte)		(pte_val(pte) & L_PTE_YOUNG)
+#define pte_exec(pte)		(pte_val(pte) & L_PTE_EXEC)
 #define pte_special(pte)	(0)
 
+#define pte_present_user(pte) \
+	((pte_val(pte) & (L_PTE_PRESENT | L_PTE_USER)) == \
+	 (L_PTE_PRESENT | L_PTE_USER))
+
 #define PTE_BIT_FUNC(fn,op) \
 static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
 
diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h
index 7bed3daf83b..67357baaeee 100644
--- a/arch/arm/include/asm/processor.h
+++ b/arch/arm/include/asm/processor.h
@@ -19,6 +19,7 @@
 
 #ifdef __KERNEL__
 
+#include <asm/hw_breakpoint.h>
 #include <asm/ptrace.h>
 #include <asm/types.h>
 
@@ -41,6 +42,9 @@ struct debug_entry {
 struct debug_info {
 	int			nsaved;
 	struct debug_entry	bp[2];
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+	struct perf_event	*hbp[ARM_MAX_HBP_SLOTS];
+#endif
 };
 
 struct thread_struct {
diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h
index 7ce15eb15f7..783d50f3261 100644
--- a/arch/arm/include/asm/ptrace.h
+++ b/arch/arm/include/asm/ptrace.h
@@ -29,6 +29,8 @@
 #define PTRACE_SETCRUNCHREGS	26
 #define PTRACE_GETVFPREGS	27
 #define PTRACE_SETVFPREGS	28
+#define PTRACE_GETHBPREGS	29
+#define PTRACE_SETHBPREGS	30
 
 /*
  * PSR bits
diff --git a/arch/arm/include/asm/seccomp.h b/arch/arm/include/asm/seccomp.h
new file mode 100644
index 00000000000..52b156b341f
--- /dev/null
+++ b/arch/arm/include/asm/seccomp.h
@@ -0,0 +1,11 @@
+#ifndef _ASM_ARM_SECCOMP_H
+#define _ASM_ARM_SECCOMP_H
+
+#include <linux/unistd.h>
+
+#define __NR_seccomp_read __NR_read
+#define __NR_seccomp_write __NR_write
+#define __NR_seccomp_exit __NR_exit
+#define __NR_seccomp_sigreturn __NR_rt_sigreturn
+
+#endif /* _ASM_ARM_SECCOMP_H */
diff --git a/arch/arm/include/asm/smp_mpidr.h b/arch/arm/include/asm/smp_mpidr.h
new file mode 100644
index 00000000000..6a9307d6490
--- /dev/null
+++ b/arch/arm/include/asm/smp_mpidr.h
@@ -0,0 +1,17 @@
+#ifndef ASMARM_SMP_MIDR_H
+#define ASMARM_SMP_MIDR_H
+
+#define hard_smp_processor_id()						\
+	({								\
+		unsigned int cpunum;					\
+		__asm__("\n"						\
+			"1:	mrc p15, 0, %0, c0, c0, 5\n"		\
+			"	.pushsection \".alt.smp.init\", \"a\"\n"\
+			"	.long	1b\n"				\
+			"	mov	%0, #0\n"			\
+			"	.popsection"				\
+			: "=r" (cpunum));				\
+		cpunum &= 0x0F;						\
+	})
+
+#endif
diff --git a/arch/arm/include/asm/smp_plat.h b/arch/arm/include/asm/smp_plat.h
index e6215305544..f24c1b9e211 100644
--- a/arch/arm/include/asm/smp_plat.h
+++ b/arch/arm/include/asm/smp_plat.h
@@ -7,15 +7,40 @@
 
 #include <asm/cputype.h>
 
+/*
+ * Return true if we are running on a SMP platform
+ */
+static inline bool is_smp(void)
+{
+#ifndef CONFIG_SMP
+	return false;
+#elif defined(CONFIG_SMP_ON_UP)
+	extern unsigned int smp_on_up;
+	return !!smp_on_up;
+#else
+	return true;
+#endif
+}
+
 /* all SMP configurations have the extended CPUID registers */
 static inline int tlb_ops_need_broadcast(void)
 {
+	if (!is_smp())
+		return 0;
+
 	return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 2;
 }
 
+#if !defined(CONFIG_SMP) || __LINUX_ARM_ARCH__ >= 7
+#define cache_ops_need_broadcast()	0
+#else
 static inline int cache_ops_need_broadcast(void)
 {
+	if (!is_smp())
+		return 0;
+
 	return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 1;
 }
+#endif
 
 #endif
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index 8ba1ccf82a0..1120f18a6b1 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -85,6 +85,10 @@ void hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int,
 				       struct pt_regs *),
 		     int sig, int code, const char *name);
 
+void hook_ifault_code(int nr, int (*fn)(unsigned long, unsigned int,
+				       struct pt_regs *),
+		     int sig, int code, const char *name);
+
 #define xchg(ptr,x) \
 	((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
 
@@ -325,6 +329,8 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size
 extern void disable_hlt(void);
 extern void enable_hlt(void);
 
+void cpu_idle_wait(void);
+
 #include <asm-generic/cmpxchg-local.h>
 
 #if __LINUX_ARM_ARCH__ < 6
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index 763e29fa853..7b5cc8dae06 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -144,6 +144,7 @@ extern void vfp_flush_hwstate(struct thread_info *);
 #define TIF_MEMDIE		18	/* is terminating due to OOM killer */
 #define TIF_FREEZE		19
 #define TIF_RESTORE_SIGMASK	20
+#define TIF_SECCOMP		21
 
 #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
@@ -153,6 +154,7 @@ extern void vfp_flush_hwstate(struct thread_info *);
 #define _TIF_USING_IWMMXT	(1 << TIF_USING_IWMMXT)
 #define _TIF_FREEZE		(1 << TIF_FREEZE)
 #define _TIF_RESTORE_SIGMASK	(1 << TIF_RESTORE_SIGMASK)
+#define _TIF_SECCOMP		(1 << TIF_SECCOMP)
 
 /*
  * Change these and you break ASM code in entry-common.S
diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h
index 33b546ae72d..ce7378ea15a 100644
--- a/arch/arm/include/asm/tlbflush.h
+++ b/arch/arm/include/asm/tlbflush.h
@@ -70,6 +70,10 @@
 #undef _TLB
 #undef MULTI_TLB
 
+#ifdef CONFIG_SMP_ON_UP
+#define MULTI_TLB 1
+#endif
+
 #define v3_tlb_flags	(TLB_V3_FULL | TLB_V3_PAGE)
 
 #ifdef CONFIG_CPU_TLB_V3
@@ -185,17 +189,23 @@
 # define v6wbi_always_flags	(-1UL)
 #endif
 
-#ifdef CONFIG_SMP
-#define v7wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_V7_IS_BTB | \
+#define v7wbi_tlb_flags_smp	(TLB_WB | TLB_DCLEAN | TLB_V7_IS_BTB | \
 			 TLB_V7_UIS_FULL | TLB_V7_UIS_PAGE | TLB_V7_UIS_ASID)
-#else
-#define v7wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_BTB | \
+#define v7wbi_tlb_flags_up	(TLB_WB | TLB_DCLEAN | TLB_BTB | \
 			 TLB_V6_U_FULL | TLB_V6_U_PAGE | TLB_V6_U_ASID)
-#endif
 
 #ifdef CONFIG_CPU_TLB_V7
-# define v7wbi_possible_flags	v7wbi_tlb_flags
-# define v7wbi_always_flags	v7wbi_tlb_flags
+
+# ifdef CONFIG_SMP_ON_UP
+#  define v7wbi_possible_flags	(v7wbi_tlb_flags_smp | v7wbi_tlb_flags_up)
+#  define v7wbi_always_flags	(v7wbi_tlb_flags_smp & v7wbi_tlb_flags_up)
+# elif defined(CONFIG_SMP)
+#  define v7wbi_possible_flags	v7wbi_tlb_flags_smp
+#  define v7wbi_always_flags	v7wbi_tlb_flags_smp
+# else
+#  define v7wbi_possible_flags	v7wbi_tlb_flags_up
+#  define v7wbi_always_flags	v7wbi_tlb_flags_up
+# endif
 # ifdef _TLB
 #  define MULTI_TLB 1
 # else
@@ -560,12 +570,20 @@ extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
 #endif
 
 /*
- * if PG_dcache_dirty is set for the page, we need to ensure that any
+ * If PG_dcache_clean is not set for the page, we need to ensure that any
  * cache entries for the kernels virtual memory range are written
- * back to the page.
+ * back to the page. On ARMv6 and later, the cache coherency is handled via
+ * the set_pte_at() function.
  */
+#if __LINUX_ARM_ARCH__ < 6
 extern void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr,
 	pte_t *ptep);
+#else
+static inline void update_mmu_cache(struct vm_area_struct *vma,
+				    unsigned long addr, pte_t *ptep)
+{
+}
+#endif
 
 #endif
 
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 980b78e3132..5b9b268f4fb 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -42,6 +42,7 @@ obj-$(CONFIG_KGDB)		+= kgdb.o
 obj-$(CONFIG_ARM_UNWIND)	+= unwind.o
 obj-$(CONFIG_HAVE_TCM)		+= tcm.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
+obj-$(CONFIG_HAVE_HW_BREAKPOINT)	+= hw_breakpoint.o
 
 obj-$(CONFIG_CRUNCH)		+= crunch.o crunch-bits.o
 AFLAGS_crunch-bits.o		:= -Wa,-mcpu=ep9312
diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c
index 8214bfebfac..e5e1e538767 100644
--- a/arch/arm/kernel/armksyms.c
+++ b/arch/arm/kernel/armksyms.c
@@ -165,6 +165,8 @@ EXPORT_SYMBOL(_find_next_bit_be);
 #endif
 
 #ifdef CONFIG_FUNCTION_TRACER
+#ifdef CONFIG_OLD_MCOUNT
 EXPORT_SYMBOL(mcount);
+#endif
 EXPORT_SYMBOL(__gnu_mcount_nc);
 #endif
diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c
index 85f2a019f77..82da6617213 100644
--- a/arch/arm/kernel/asm-offsets.c
+++ b/arch/arm/kernel/asm-offsets.c
@@ -102,8 +102,6 @@ int main(void)
   DEFINE(SIZEOF_MACHINE_DESC,	sizeof(struct machine_desc));
   DEFINE(MACHINFO_TYPE,		offsetof(struct machine_desc, nr));
   DEFINE(MACHINFO_NAME,		offsetof(struct machine_desc, name));
-  DEFINE(MACHINFO_PHYSIO,	offsetof(struct machine_desc, phys_io));
-  DEFINE(MACHINFO_PGOFFIO,	offsetof(struct machine_desc, io_pg_offst));
   BLANK();
   DEFINE(PROC_INFO_SZ,		sizeof(struct proc_info_list));
   DEFINE(PROCINFO_INITFUNC,	offsetof(struct proc_info_list, __cpu_flush));
diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S
index a38b4879441..a0f07521ca8 100644
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@@ -22,11 +22,11 @@
 #if defined(CONFIG_DEBUG_ICEDCC)
 		@@ debug using ARM EmbeddedICE DCC channel
 
-#if defined(CONFIG_CPU_V6)
-
-		.macro	addruart, rx, tmp
+		.macro	addruart, rp, rv
 		.endm
 
+#if defined(CONFIG_CPU_V6)
+
 		.macro	senduart, rd, rx
 		mcr	p14, 0, \rd, c0, c5, 0
 		.endm
@@ -51,9 +51,6 @@
 
 #elif defined(CONFIG_CPU_V7)
 
-		.macro	addruart, rx, tmp
-		.endm
-
 		.macro	senduart, rd, rx
 		mcr	p14, 0, \rd, c0, c5, 0
 		.endm
@@ -71,9 +68,6 @@ wait:		mrc	p14, 0, pc, c0, c1, 0
 
 #elif defined(CONFIG_CPU_XSCALE)
 
-		.macro	addruart, rx, tmp
-		.endm
-
 		.macro	senduart, rd, rx
 		mcr	p14, 0, \rd, c8, c0, 0
 		.endm
@@ -98,9 +92,6 @@ wait:		mrc	p14, 0, pc, c0, c1, 0
 
 #else
 
-		.macro	addruart, rx, tmp
-		.endm
-
 		.macro	senduart, rd, rx
 		mcr	p14, 0, \rd, c1, c0, 0
 		.endm
@@ -130,6 +121,22 @@ wait:		mrc	p14, 0, pc, c0, c1, 0
 #include <mach/debug-macro.S>
 #endif	/* CONFIG_DEBUG_ICEDCC */
 
+#ifdef CONFIG_MMU
+		.macro	addruart_current, rx, tmp1, tmp2
+		addruart	\tmp1, \tmp2
+		mrc		p15, 0, \rx, c1, c0
+		tst		\rx, #1
+		moveq		\rx, \tmp1
+		movne		\rx, \tmp2
+		.endm
+
+#else /* !CONFIG_MMU */
+		.macro	addruart_current, rx, tmp1, tmp2
+		addruart	\rx, \tmp1
+		.endm
+
+#endif /* CONFIG_MMU */
+
 /*
  * Useful debugging routines
  */
@@ -164,7 +171,7 @@ ENDPROC(printhex2)
 		.ltorg
 
 ENTRY(printascii)
-		addruart r3, r1
+		addruart_current r3, r1, r2
 		b	2f
 1:		waituart r2, r3
 		senduart r1, r3
@@ -180,7 +187,7 @@ ENTRY(printascii)
 ENDPROC(printascii)
 
 ENTRY(printch)
-		addruart r3, r1
+		addruart_current r3, r1, r2
 		mov	r1, r0
 		mov	r0, #0
 		b	1b
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index bb8e93a7640..c09e3573c5d 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -46,7 +46,8 @@
 	 * this macro assumes that irqstat (r6) and base (r5) are
 	 * preserved from get_irqnr_and_base above
 	 */
-	test_for_ipi r0, r6, r5, lr
+	ALT_SMP(test_for_ipi r0, r6, r5, lr)
+	ALT_UP_B(9997f)
 	movne	r0, sp
 	adrne	lr, BSYM(1b)
 	bne	do_IPI
@@ -57,6 +58,7 @@
 	adrne	lr, BSYM(1b)
 	bne	do_local_timer
 #endif
+9997:
 #endif
 
 	.endm
@@ -965,11 +967,8 @@ kuser_cmpxchg_fixup:
 	beq	1b
 	rsbs	r0, r3, #0
 	/* beware -- each __kuser slot must be 8 instructions max */
-#ifdef CONFIG_SMP
-	b	__kuser_memory_barrier
-#else
-	usr_ret	lr
-#endif
+	ALT_SMP(b	__kuser_memory_barrier)
+	ALT_UP(usr_ret	lr)
 
 #endif
 
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 7885722bdf4..8bfa98757cd 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -129,30 +129,58 @@ ENDPROC(ret_from_fork)
  * clobber the ip register.  This is OK because the ARM calling convention
  * allows it to be clobbered in subroutines and doesn't use it to hold
  * parameters.)
+ *
+ * When using dynamic ftrace, we patch out the mcount call by a "mov r0, r0"
+ * for the mcount case, and a "pop {lr}" for the __gnu_mcount_nc case (see
+ * arch/arm/kernel/ftrace.c).
  */
+
+#ifndef CONFIG_OLD_MCOUNT
+#if (__GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 4))
+#error Ftrace requires CONFIG_FRAME_POINTER=y with GCC older than 4.4.0.
+#endif
+#endif
+
 #ifdef CONFIG_DYNAMIC_FTRACE
-ENTRY(mcount)
+ENTRY(__gnu_mcount_nc)
+	mov	ip, lr
+	ldmia	sp!, {lr}
+	mov	pc, ip
+ENDPROC(__gnu_mcount_nc)
+
+ENTRY(ftrace_caller)
 	stmdb	sp!, {r0-r3, lr}
 	mov	r0, lr
 	sub	r0, r0, #MCOUNT_INSN_SIZE
+	ldr	r1, [sp, #20]
 
-	.globl mcount_call
-mcount_call:
+	.global	ftrace_call
+ftrace_call:
 	bl	ftrace_stub
-	ldr	lr, [fp, #-4]			@ restore lr
-	ldmia	sp!, {r0-r3, pc}
+	ldmia	sp!, {r0-r3, ip, lr}
+	mov	pc, ip
+ENDPROC(ftrace_caller)
 
-ENTRY(ftrace_caller)
+#ifdef CONFIG_OLD_MCOUNT
+ENTRY(mcount)
+	stmdb	sp!, {lr}
+	ldr	lr, [fp, #-4]
+	ldmia	sp!, {pc}
+ENDPROC(mcount)
+
+ENTRY(ftrace_caller_old)
 	stmdb	sp!, {r0-r3, lr}
 	ldr	r1, [fp, #-4]
 	mov	r0, lr
 	sub	r0, r0, #MCOUNT_INSN_SIZE
 
-	.globl ftrace_call
-ftrace_call:
+	.globl ftrace_call_old
+ftrace_call_old:
 	bl	ftrace_stub
 	ldr	lr, [fp, #-4]			@ restore lr
 	ldmia	sp!, {r0-r3, pc}
+ENDPROC(ftrace_caller_old)
+#endif
 
 #else
 
@@ -160,7 +188,7 @@ ENTRY(__gnu_mcount_nc)
 	stmdb	sp!, {r0-r3, lr}
 	ldr	r0, =ftrace_trace_function
 	ldr	r2, [r0]
-	adr	r0, ftrace_stub
+	adr	r0, .Lftrace_stub
 	cmp	r0, r2
 	bne	gnu_trace
 	ldmia	sp!, {r0-r3, ip, lr}
@@ -170,11 +198,19 @@ gnu_trace:
 	ldr	r1, [sp, #20]			@ lr of instrumented routine
 	mov	r0, lr
 	sub	r0, r0, #MCOUNT_INSN_SIZE
-	mov	lr, pc
+	adr	lr, BSYM(1f)
 	mov	pc, r2
+1:
 	ldmia	sp!, {r0-r3, ip, lr}
 	mov	pc, ip
+ENDPROC(__gnu_mcount_nc)
 
+#ifdef CONFIG_OLD_MCOUNT
+/*
+ * This is under an ifdef in order to force link-time errors for people trying
+ * to build with !FRAME_POINTER with a GCC which doesn't use the new-style
+ * mcount.
+ */
 ENTRY(mcount)
 	stmdb	sp!, {r0-r3, lr}
 	ldr	r0, =ftrace_trace_function
@@ -193,12 +229,15 @@ trace:
 	mov	pc, r2
 	ldr	lr, [fp, #-4]			@ restore lr
 	ldmia	sp!, {r0-r3, pc}
+ENDPROC(mcount)
+#endif
 
 #endif /* CONFIG_DYNAMIC_FTRACE */
 
-	.globl ftrace_stub
-ftrace_stub:
+ENTRY(ftrace_stub)
+.Lftrace_stub:
 	mov	pc, lr
+ENDPROC(ftrace_stub)
 
 #endif /* CONFIG_FUNCTION_TRACER */
 
@@ -295,7 +334,6 @@ ENTRY(vector_swi)
 
 	get_thread_info tsk
 	adr	tbl, sys_call_table		@ load syscall table pointer
-	ldr	ip, [tsk, #TI_FLAGS]		@ check for syscall tracing
 
 #if defined(CONFIG_OABI_COMPAT)
 	/*
@@ -312,8 +350,20 @@ ENTRY(vector_swi)
 	eor	scno, scno, #__NR_SYSCALL_BASE	@ check OS number
 #endif
 
+	ldr	r10, [tsk, #TI_FLAGS]		@ check for syscall tracing
 	stmdb	sp!, {r4, r5}			@ push fifth and sixth args
-	tst	ip, #_TIF_SYSCALL_TRACE		@ are we tracing syscalls?
+
+#ifdef CONFIG_SECCOMP
+	tst	r10, #_TIF_SECCOMP
+	beq	1f
+	mov	r0, scno
+	bl	__secure_computing	
+	add	r0, sp, #S_R0 + S_OFF		@ pointer to regs
+	ldmia	r0, {r0 - r3}			@ have to reload r0 - r3
+1:
+#endif
+
+	tst	r10, #_TIF_SYSCALL_TRACE		@ are we tracing syscalls?
 	bne	__sys_trace
 
 	cmp	scno, #NR_syscalls		@ check upper syscall limit
diff --git a/arch/arm/kernel/etm.c b/arch/arm/kernel/etm.c
index 33c7077174d..a48d5125798 100644
--- a/arch/arm/kernel/etm.c
+++ b/arch/arm/kernel/etm.c
@@ -30,6 +30,21 @@
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Alexander Shishkin");
 
+/*
+ * ETM tracer state
+ */
+struct tracectx {
+	unsigned int	etb_bufsz;
+	void __iomem	*etb_regs;
+	void __iomem	*etm_regs;
+	unsigned long	flags;
+	int		ncmppairs;
+	int		etm_portsz;
+	struct device	*dev;
+	struct clk	*emu_clk;
+	struct mutex	mutex;
+};
+
 static struct tracectx tracer;
 
 static inline bool trace_isrunning(struct tracectx *t)
diff --git a/arch/arm/kernel/ftrace.c b/arch/arm/kernel/ftrace.c
index 0298286ad4a..971ac8c36ea 100644
--- a/arch/arm/kernel/ftrace.c
+++ b/arch/arm/kernel/ftrace.c
@@ -2,102 +2,194 @@
  * Dynamic function tracing support.
  *
  * Copyright (C) 2008 Abhishek Sagar <sagar.abhishek@gmail.com>
+ * Copyright (C) 2010 Rabin Vincent <rabin@rab.in>
  *
  * For licencing details, see COPYING.
  *
  * Defines low-level handling of mcount calls when the kernel
  * is compiled with the -pg flag. When using dynamic ftrace, the
- * mcount call-sites get patched lazily with NOP till they are
- * enabled. All code mutation routines here take effect atomically.
+ * mcount call-sites get patched with NOP till they are enabled.
+ * All code mutation routines here are called under stop_machine().
  */
 
 #include <linux/ftrace.h>
+#include <linux/uaccess.h>
 
 #include <asm/cacheflush.h>
 #include <asm/ftrace.h>
 
-#define PC_OFFSET      8
-#define BL_OPCODE      0xeb000000
-#define BL_OFFSET_MASK 0x00ffffff
+#ifdef CONFIG_THUMB2_KERNEL
+#define	NOP		0xeb04f85d	/* pop.w {lr} */
+#else
+#define	NOP		0xe8bd4000	/* pop {lr} */
+#endif
 
-static unsigned long bl_insn;
-static const unsigned long NOP = 0xe1a00000; /* mov r0, r0 */
+#ifdef CONFIG_OLD_MCOUNT
+#define OLD_MCOUNT_ADDR	((unsigned long) mcount)
+#define OLD_FTRACE_ADDR ((unsigned long) ftrace_caller_old)
 
-unsigned char *ftrace_nop_replace(void)
+#define	OLD_NOP		0xe1a00000	/* mov r0, r0 */
+
+static unsigned long ftrace_nop_replace(struct dyn_ftrace *rec)
 {
-	return (char *)&NOP;
+	return rec->arch.old_mcount ? OLD_NOP : NOP;
 }
 
+static unsigned long adjust_address(struct dyn_ftrace *rec, unsigned long addr)
+{
+	if (!rec->arch.old_mcount)
+		return addr;
+
+	if (addr == MCOUNT_ADDR)
+		addr = OLD_MCOUNT_ADDR;
+	else if (addr == FTRACE_ADDR)
+		addr = OLD_FTRACE_ADDR;
+
+	return addr;
+}
+#else
+static unsigned long ftrace_nop_replace(struct dyn_ftrace *rec)
+{
+	return NOP;
+}
+
+static unsigned long adjust_address(struct dyn_ftrace *rec, unsigned long addr)
+{
+	return addr;
+}
+#endif
+
 /* construct a branch (BL) instruction to addr */
-unsigned char *ftrace_call_replace(unsigned long pc, unsigned long addr)
+#ifdef CONFIG_THUMB2_KERNEL
+static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr)
 {
+	unsigned long s, j1, j2, i1, i2, imm10, imm11;
+	unsigned long first, second;
 	long offset;
 
-	offset = (long)addr - (long)(pc + PC_OFFSET);
+	offset = (long)addr - (long)(pc + 4);
+	if (offset < -16777216 || offset > 16777214) {
+		WARN_ON_ONCE(1);
+		return 0;
+	}
+
+	s	= (offset >> 24) & 0x1;
+	i1	= (offset >> 23) & 0x1;
+	i2	= (offset >> 22) & 0x1;
+	imm10	= (offset >> 12) & 0x3ff;
+	imm11	= (offset >>  1) & 0x7ff;
+
+	j1 = (!i1) ^ s;
+	j2 = (!i2) ^ s;
+
+	first = 0xf000 | (s << 10) | imm10;
+	second = 0xd000 | (j1 << 13) | (j2 << 11) | imm11;
+
+	return (second << 16) | first;
+}
+#else
+static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr)
+{
+	long offset;
+
+	offset = (long)addr - (long)(pc + 8);
 	if (unlikely(offset < -33554432 || offset > 33554428)) {
 		/* Can't generate branches that far (from ARM ARM). Ftrace
 		 * doesn't generate branches outside of kernel text.
 		 */
 		WARN_ON_ONCE(1);
-		return NULL;
+		return 0;
 	}
-	offset = (offset >> 2) & BL_OFFSET_MASK;
-	bl_insn = BL_OPCODE | offset;
-	return (unsigned char *)&bl_insn;
-}
 
-int ftrace_modify_code(unsigned long pc, unsigned char *old_code,
-		       unsigned char *new_code)
-{
-	unsigned long err = 0, replaced = 0, old, new;
+	offset = (offset >> 2) & 0x00ffffff;
 
-	old = *(unsigned long *)old_code;
-	new = *(unsigned long *)new_code;
+	return 0xeb000000 | offset;
+}
+#endif
 
-	__asm__ __volatile__ (
-		"1:  ldr    %1, [%2]  \n"
-		"    cmp    %1, %4    \n"
-		"2:  streq  %3, [%2]  \n"
-		"    cmpne  %1, %3    \n"
-		"    movne  %0, #2    \n"
-		"3:\n"
+static int ftrace_modify_code(unsigned long pc, unsigned long old,
+			      unsigned long new)
+{
+	unsigned long replaced;
 
-		".pushsection .fixup, \"ax\"\n"
-		"4:  mov  %0, #1  \n"
-		"    b    3b      \n"
-		".popsection\n"
+	if (probe_kernel_read(&replaced, (void *)pc, MCOUNT_INSN_SIZE))
+		return -EFAULT;
 
-		".pushsection __ex_table, \"a\"\n"
-		"    .long 1b, 4b \n"
-		"    .long 2b, 4b \n"
-		".popsection\n"
+	if (replaced != old)
+		return -EINVAL;
 
-		: "=r"(err), "=r"(replaced)
-		: "r"(pc), "r"(new), "r"(old), "0"(err), "1"(replaced)
-		: "memory");
+	if (probe_kernel_write((void *)pc, &new, MCOUNT_INSN_SIZE))
+		return -EPERM;
 
-	if (!err && (replaced == old))
-		flush_icache_range(pc, pc + MCOUNT_INSN_SIZE);
+	flush_icache_range(pc, pc + MCOUNT_INSN_SIZE);
 
-	return err;
+	return 0;
 }
 
 int ftrace_update_ftrace_func(ftrace_func_t func)
 {
-	int ret;
 	unsigned long pc, old;
-	unsigned char *new;
+	unsigned long new;
+	int ret;
 
 	pc = (unsigned long)&ftrace_call;
 	memcpy(&old, &ftrace_call, MCOUNT_INSN_SIZE);
 	new = ftrace_call_replace(pc, (unsigned long)func);
-	ret = ftrace_modify_code(pc, (unsigned char *)&old, new);
+
+	ret = ftrace_modify_code(pc, old, new);
+
+#ifdef CONFIG_OLD_MCOUNT
+	if (!ret) {
+		pc = (unsigned long)&ftrace_call_old;
+		memcpy(&old, &ftrace_call_old, MCOUNT_INSN_SIZE);
+		new = ftrace_call_replace(pc, (unsigned long)func);
+
+		ret = ftrace_modify_code(pc, old, new);
+	}
+#endif
+
+	return ret;
+}
+
+int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
+{
+	unsigned long new, old;
+	unsigned long ip = rec->ip;
+
+	old = ftrace_nop_replace(rec);
+	new = ftrace_call_replace(ip, adjust_address(rec, addr));
+
+	return ftrace_modify_code(rec->ip, old, new);
+}
+
+int ftrace_make_nop(struct module *mod,
+		    struct dyn_ftrace *rec, unsigned long addr)
+{
+	unsigned long ip = rec->ip;
+	unsigned long old;
+	unsigned long new;
+	int ret;
+
+	old = ftrace_call_replace(ip, adjust_address(rec, addr));
+	new = ftrace_nop_replace(rec);
+	ret = ftrace_modify_code(ip, old, new);
+
+#ifdef CONFIG_OLD_MCOUNT
+	if (ret == -EINVAL && addr == MCOUNT_ADDR) {
+		rec->arch.old_mcount = true;
+
+		old = ftrace_call_replace(ip, adjust_address(rec, addr));
+		new = ftrace_nop_replace(rec);
+		ret = ftrace_modify_code(ip, old, new);
+	}
+#endif
+
 	return ret;
 }
 
-/* run from ftrace_init with irqs disabled */
 int __init ftrace_dyn_arch_init(void *data)
 {
-	ftrace_mcount_set(data);
+	*(unsigned long *)data = 0;
+
 	return 0;
 }
diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
index b9505aa267c..bbecaac1e01 100644
--- a/arch/arm/kernel/head-common.S
+++ b/arch/arm/kernel/head-common.S
@@ -15,55 +15,6 @@
 #define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2)
 #define ATAG_CORE_SIZE_EMPTY ((2*4) >> 2)
 
-	.align	2
-	.type	__switch_data, %object
-__switch_data:
-	.long	__mmap_switched
-	.long	__data_loc			@ r4
-	.long	_data				@ r5
-	.long	__bss_start			@ r6
-	.long	_end				@ r7
-	.long	processor_id			@ r4
-	.long	__machine_arch_type		@ r5
-	.long	__atags_pointer			@ r6
-	.long	cr_alignment			@ r7
-	.long	init_thread_union + THREAD_START_SP @ sp
-
-/*
- * The following fragment of code is executed with the MMU on in MMU mode,
- * and uses absolute addresses; this is not position independent.
- *
- *  r0  = cp#15 control register
- *  r1  = machine ID
- *  r2  = atags pointer
- *  r9  = processor ID
- */
-__mmap_switched:
-	adr	r3, __switch_data + 4
-
-	ldmia	r3!, {r4, r5, r6, r7}
-	cmp	r4, r5				@ Copy data segment if needed
-1:	cmpne	r5, r6
-	ldrne	fp, [r4], #4
-	strne	fp, [r5], #4
-	bne	1b
-
-	mov	fp, #0				@ Clear BSS (and zero fp)
-1:	cmp	r6, r7
-	strcc	fp, [r6],#4
-	bcc	1b
-
- ARM(	ldmia	r3, {r4, r5, r6, r7, sp})
- THUMB(	ldmia	r3, {r4, r5, r6, r7}	)
- THUMB(	ldr	sp, [r3, #16]		)
-	str	r9, [r4]			@ Save processor ID
-	str	r1, [r5]			@ Save machine type
-	str	r2, [r6]			@ Save atags pointer
-	bic	r4, r0, #CR_A			@ Clear 'A' bit
-	stmia	r7, {r0, r4}			@ Save control register values
-	b	start_kernel
-ENDPROC(__mmap_switched)
-
 /*
  * Exception handling.  Something went wrong and we can't proceed.  We
  * ought to tell the user, but since we don't have any guarantee that
@@ -73,21 +24,7 @@ ENDPROC(__mmap_switched)
  * and hope for the best (useful if bootloader fails to pass a proper
  * machine ID for example).
  */
-__error_p:
-#ifdef CONFIG_DEBUG_LL
-	adr	r0, str_p1
-	bl	printascii
-	mov	r0, r9
-	bl	printhex8
-	adr	r0, str_p2
-	bl	printascii
-	b	__error
-str_p1:	.asciz	"\nError: unrecognized/unsupported processor variant (0x"
-str_p2:	.asciz	").\n"
-	.align
-#endif
-ENDPROC(__error_p)
-
+	__HEAD
 __error_a:
 #ifdef CONFIG_DEBUG_LL
 	mov	r4, r1				@ preserve machine ID
@@ -97,7 +34,7 @@ __error_a:
 	bl	printhex8
 	adr	r0, str_a2
 	bl	printascii
-	adr	r3, 4f
+	adr	r3, __lookup_machine_type_data
 	ldmia	r3, {r4, r5, r6}		@ get machine desc list
 	sub	r4, r3, r4			@ get offset between virt&phys
 	add	r5, r5, r4			@ convert virt addresses to
@@ -125,78 +62,6 @@ str_a3:	.asciz	"\nPlease check your kernel config and/or bootloader.\n"
 	.align
 #endif
 
-__error:
-#ifdef CONFIG_ARCH_RPC
-/*
- * Turn the screen red on a error - RiscPC only.
- */
-	mov	r0, #0x02000000
-	mov	r3, #0x11
-	orr	r3, r3, r3, lsl #8
-	orr	r3, r3, r3, lsl #16
-	str	r3, [r0], #4
-	str	r3, [r0], #4
-	str	r3, [r0], #4
-	str	r3, [r0], #4
-#endif
-1:	mov	r0, r0
-	b	1b
-ENDPROC(__error)
-
-
-/*
- * Read processor ID register (CP#15, CR0), and look up in the linker-built
- * supported processor list.  Note that we can't use the absolute addresses
- * for the __proc_info lists since we aren't running with the MMU on
- * (and therefore, we are not in the correct address space).  We have to
- * calculate the offset.
- *
- *	r9 = cpuid
- * Returns:
- *	r3, r4, r6 corrupted
- *	r5 = proc_info pointer in physical address space
- *	r9 = cpuid (preserved)
- */
-__lookup_processor_type:
-	adr	r3, 3f
-	ldmia	r3, {r5 - r7}
-	add	r3, r3, #8
-	sub	r3, r3, r7			@ get offset between virt&phys
-	add	r5, r5, r3			@ convert virt addresses to
-	add	r6, r6, r3			@ physical address space
-1:	ldmia	r5, {r3, r4}			@ value, mask
-	and	r4, r4, r9			@ mask wanted bits
-	teq	r3, r4
-	beq	2f
-	add	r5, r5, #PROC_INFO_SZ		@ sizeof(proc_info_list)
-	cmp	r5, r6
-	blo	1b
-	mov	r5, #0				@ unknown processor
-2:	mov	pc, lr
-ENDPROC(__lookup_processor_type)
-
-/*
- * This provides a C-API version of the above function.
- */
-ENTRY(lookup_processor_type)
-	stmfd	sp!, {r4 - r7, r9, lr}
-	mov	r9, r0
-	bl	__lookup_processor_type
-	mov	r0, r5
-	ldmfd	sp!, {r4 - r7, r9, pc}
-ENDPROC(lookup_processor_type)
-
-/*
- * Look in <asm/procinfo.h> and arch/arm/kernel/arch.[ch] for
- * more information about the __proc_info and __arch_info structures.
- */
-	.align	2
-3:	.long	__proc_info_begin
-	.long	__proc_info_end
-4:	.long	.
-	.long	__arch_info_begin
-	.long	__arch_info_end
-
 /*
  * Lookup machine architecture in the linker-build list of architectures.
  * Note that we can't use the absolute addresses for the __arch_info
@@ -209,7 +74,7 @@ ENDPROC(lookup_processor_type)
  *  r5 = mach_info pointer in physical address space
  */
 __lookup_machine_type:
-	adr	r3, 4b
+	adr	r3, __lookup_machine_type_data
 	ldmia	r3, {r4, r5, r6}
 	sub	r3, r3, r4			@ get offset between virt&phys
 	add	r5, r5, r3			@ convert virt addresses to
@@ -225,15 +90,16 @@ __lookup_machine_type:
 ENDPROC(__lookup_machine_type)
 
 /*
- * This provides a C-API version of the above function.
+ * Look in arch/arm/kernel/arch.[ch] for information about the
+ * __arch_info structures.
  */
-ENTRY(lookup_machine_type)
-	stmfd	sp!, {r4 - r6, lr}
-	mov	r1, r0
-	bl	__lookup_machine_type
-	mov	r0, r5
-	ldmfd	sp!, {r4 - r6, pc}
-ENDPROC(lookup_machine_type)
+	.align	2
+	.type	__lookup_machine_type_data, %object
+__lookup_machine_type_data:
+	.long	.
+	.long	__arch_info_begin
+	.long	__arch_info_end
+	.size	__lookup_machine_type_data, . - __lookup_machine_type_data
 
 /* Determine validity of the r2 atags pointer.  The heuristic requires
  * that the pointer be aligned, in the first 16k of physical RAM and
@@ -265,3 +131,150 @@ __vet_atags:
 1:	mov	r2, #0
 	mov	pc, lr
 ENDPROC(__vet_atags)
+
+/*
+ * The following fragment of code is executed with the MMU on in MMU mode,
+ * and uses absolute addresses; this is not position independent.
+ *
+ *  r0  = cp#15 control register
+ *  r1  = machine ID
+ *  r2  = atags pointer
+ *  r9  = processor ID
+ */
+	__INIT
+__mmap_switched:
+	adr	r3, __mmap_switched_data
+
+	ldmia	r3!, {r4, r5, r6, r7}
+	cmp	r4, r5				@ Copy data segment if needed
+1:	cmpne	r5, r6
+	ldrne	fp, [r4], #4
+	strne	fp, [r5], #4
+	bne	1b
+
+	mov	fp, #0				@ Clear BSS (and zero fp)
+1:	cmp	r6, r7
+	strcc	fp, [r6],#4
+	bcc	1b
+
+ ARM(	ldmia	r3, {r4, r5, r6, r7, sp})
+ THUMB(	ldmia	r3, {r4, r5, r6, r7}	)
+ THUMB(	ldr	sp, [r3, #16]		)
+	str	r9, [r4]			@ Save processor ID
+	str	r1, [r5]			@ Save machine type
+	str	r2, [r6]			@ Save atags pointer
+	bic	r4, r0, #CR_A			@ Clear 'A' bit
+	stmia	r7, {r0, r4}			@ Save control register values
+	b	start_kernel
+ENDPROC(__mmap_switched)
+
+	.align	2
+	.type	__mmap_switched_data, %object
+__mmap_switched_data:
+	.long	__data_loc			@ r4
+	.long	_sdata				@ r5
+	.long	__bss_start			@ r6
+	.long	_end				@ r7
+	.long	processor_id			@ r4
+	.long	__machine_arch_type		@ r5
+	.long	__atags_pointer			@ r6
+	.long	cr_alignment			@ r7
+	.long	init_thread_union + THREAD_START_SP @ sp
+	.size	__mmap_switched_data, . - __mmap_switched_data
+
+/*
+ * This provides a C-API version of __lookup_machine_type
+ */
+ENTRY(lookup_machine_type)
+	stmfd	sp!, {r4 - r6, lr}
+	mov	r1, r0
+	bl	__lookup_machine_type
+	mov	r0, r5
+	ldmfd	sp!, {r4 - r6, pc}
+ENDPROC(lookup_machine_type)
+
+/*
+ * This provides a C-API version of __lookup_processor_type
+ */
+ENTRY(lookup_processor_type)
+	stmfd	sp!, {r4 - r6, r9, lr}
+	mov	r9, r0
+	bl	__lookup_processor_type
+	mov	r0, r5
+	ldmfd	sp!, {r4 - r6, r9, pc}
+ENDPROC(lookup_processor_type)
+
+/*
+ * Read processor ID register (CP#15, CR0), and look up in the linker-built
+ * supported processor list.  Note that we can't use the absolute addresses
+ * for the __proc_info lists since we aren't running with the MMU on
+ * (and therefore, we are not in the correct address space).  We have to
+ * calculate the offset.
+ *
+ *	r9 = cpuid
+ * Returns:
+ *	r3, r4, r6 corrupted
+ *	r5 = proc_info pointer in physical address space
+ *	r9 = cpuid (preserved)
+ */
+	__CPUINIT
+__lookup_processor_type:
+	adr	r3, __lookup_processor_type_data
+	ldmia	r3, {r4 - r6}
+	sub	r3, r3, r4			@ get offset between virt&phys
+	add	r5, r5, r3			@ convert virt addresses to
+	add	r6, r6, r3			@ physical address space
+1:	ldmia	r5, {r3, r4}			@ value, mask
+	and	r4, r4, r9			@ mask wanted bits
+	teq	r3, r4
+	beq	2f
+	add	r5, r5, #PROC_INFO_SZ		@ sizeof(proc_info_list)
+	cmp	r5, r6
+	blo	1b
+	mov	r5, #0				@ unknown processor
+2:	mov	pc, lr
+ENDPROC(__lookup_processor_type)
+
+/*
+ * Look in <asm/procinfo.h> for information about the __proc_info structure.
+ */
+	.align	2
+	.type	__lookup_processor_type_data, %object
+__lookup_processor_type_data:
+	.long	.
+	.long	__proc_info_begin
+	.long	__proc_info_end
+	.size	__lookup_processor_type_data, . - __lookup_processor_type_data
+
+__error_p:
+#ifdef CONFIG_DEBUG_LL
+	adr	r0, str_p1
+	bl	printascii
+	mov	r0, r9
+	bl	printhex8
+	adr	r0, str_p2
+	bl	printascii
+	b	__error
+str_p1:	.asciz	"\nError: unrecognized/unsupported processor variant (0x"
+str_p2:	.asciz	").\n"
+	.align
+#endif
+ENDPROC(__error_p)
+
+__error:
+#ifdef CONFIG_ARCH_RPC
+/*
+ * Turn the screen red on a error - RiscPC only.
+ */
+	mov	r0, #0x02000000
+	mov	r3, #0x11
+	orr	r3, r3, r3, lsl #8
+	orr	r3, r3, r3, lsl #16
+	str	r3, [r0], #4
+	str	r3, [r0], #4
+	str	r3, [r0], #4
+	str	r3, [r0], #4
+#endif
+1:	mov	r0, r0
+	b	1b
+ENDPROC(__error)
diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S
index 573b803dc6b..814ce1a7327 100644
--- a/arch/arm/kernel/head-nommu.S
+++ b/arch/arm/kernel/head-nommu.S
@@ -48,8 +48,6 @@ ENTRY(stext)
 	movs	r8, r5				@ invalid machine (r5=0)?
 	beq	__error_a			@ yes, error 'a'
 
-	ldr	r13, __switch_data		@ address to jump to after
-						@ the initialization is done
 	adr	lr, BSYM(__after_proc_init)	@ return (PIC) address
  ARM(	add	pc, r10, #PROCINFO_INITFUNC	)
  THUMB(	add	r12, r10, #PROCINFO_INITFUNC	)
@@ -87,8 +85,7 @@ __after_proc_init:
 	mcr	p15, 0, r0, c1, c0, 0		@ write control reg
 #endif /* CONFIG_CPU_CP15 */
 
-	mov	r3, r13
-	mov	pc, r3				@ clear the BSS and jump
+	b	__mmap_switched			@ clear the BSS and jump
 						@ to start_kernel
 ENDPROC(__after_proc_init)
 	.ltorg
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index eb62bf94721..dd6b369ac69 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -22,6 +22,10 @@
 #include <asm/thread_info.h>
 #include <asm/system.h>
 
+#ifdef CONFIG_DEBUG_LL
+#include <mach/debug-macro.S>
+#endif
+
 #if (PHYS_OFFSET & 0x001fffff)
 #error "PHYS_OFFSET must be at an even 2MiB boundary!"
 #endif
@@ -86,6 +90,9 @@ ENTRY(stext)
 	movs	r8, r5				@ invalid machine (r5=0)?
 	beq	__error_a			@ yes, error 'a'
 	bl	__vet_atags
+#ifdef CONFIG_SMP_ON_UP
+	bl	__fixup_smp
+#endif
 	bl	__create_page_tables
 
 	/*
@@ -95,113 +102,15 @@ ENTRY(stext)
 	 * above.  On return, the CPU will be ready for the MMU to be
 	 * turned on, and r0 will hold the CPU control register value.
 	 */
-	ldr	r13, __switch_data		@ address to jump to after
+	ldr	r13, =__mmap_switched		@ address to jump to after
 						@ mmu has been enabled
-	adr	lr, BSYM(__enable_mmu)		@ return (PIC) address
+	adr	lr, BSYM(1f)			@ return (PIC) address
  ARM(	add	pc, r10, #PROCINFO_INITFUNC	)
  THUMB(	add	r12, r10, #PROCINFO_INITFUNC	)
  THUMB(	mov	pc, r12				)
+1:	b	__enable_mmu
 ENDPROC(stext)
-
-#if defined(CONFIG_SMP)
-ENTRY(secondary_startup)
-	/*
-	 * Common entry point for secondary CPUs.
-	 *
-	 * Ensure that we're in SVC mode, and IRQs are disabled.  Lookup
-	 * the processor type - there is no need to check the machine type
-	 * as it has already been validated by the primary processor.
-	 */
-	setmode	PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9
-	mrc	p15, 0, r9, c0, c0		@ get processor id
-	bl	__lookup_processor_type
-	movs	r10, r5				@ invalid processor?
-	moveq	r0, #'p'			@ yes, error 'p'
-	beq	__error
-
-	/*
-	 * Use the page tables supplied from  __cpu_up.
-	 */
-	adr	r4, __secondary_data
-	ldmia	r4, {r5, r7, r12}		@ address to jump to after
-	sub	r4, r4, r5			@ mmu has been enabled
-	ldr	r4, [r7, r4]			@ get secondary_data.pgdir
-	adr	lr, BSYM(__enable_mmu)		@ return address
-	mov	r13, r12			@ __secondary_switched address
- ARM(	add	pc, r10, #PROCINFO_INITFUNC	) @ initialise processor
-						  @ (return control reg)
- THUMB(	add	r12, r10, #PROCINFO_INITFUNC	)
- THUMB(	mov	pc, r12				)
-ENDPROC(secondary_startup)
-
-	/*
-	 * r6  = &secondary_data
-	 */
-ENTRY(__secondary_switched)
-	ldr	sp, [r7, #4]			@ get secondary_data.stack
-	mov	fp, #0
-	b	secondary_start_kernel
-ENDPROC(__secondary_switched)
-
-	.type	__secondary_data, %object
-__secondary_data:
-	.long	.
-	.long	secondary_data
-	.long	__secondary_switched
-#endif /* defined(CONFIG_SMP) */
-
-
-
-/*
- * Setup common bits before finally enabling the MMU.  Essentially
- * this is just loading the page table pointer and domain access
- * registers.
- */
-__enable_mmu:
-#ifdef CONFIG_ALIGNMENT_TRAP
-	orr	r0, r0, #CR_A
-#else
-	bic	r0, r0, #CR_A
-#endif
-#ifdef CONFIG_CPU_DCACHE_DISABLE
-	bic	r0, r0, #CR_C
-#endif
-#ifdef CONFIG_CPU_BPREDICT_DISABLE
-	bic	r0, r0, #CR_Z
-#endif
-#ifdef CONFIG_CPU_ICACHE_DISABLE
-	bic	r0, r0, #CR_I
-#endif
-	mov	r5, #(domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \
-		      domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \
-		      domain_val(DOMAIN_TABLE, DOMAIN_MANAGER) | \
-		      domain_val(DOMAIN_IO, DOMAIN_CLIENT))
-	mcr	p15, 0, r5, c3, c0, 0		@ load domain access register
-	mcr	p15, 0, r4, c2, c0, 0		@ load page table pointer
-	b	__turn_mmu_on
-ENDPROC(__enable_mmu)
-
-/*
- * Enable the MMU.  This completely changes the structure of the visible
- * memory space.  You will not be able to trace execution through this.
- * If you have an enquiry about this, *please* check the linux-arm-kernel
- * mailing list archives BEFORE sending another post to the list.
- *
- *  r0  = cp#15 control register
- *  r13 = *virtual* address to jump to upon completion
- *
- * other registers depend on the function called upon completion
- */
-	.align	5
-__turn_mmu_on:
-	mov	r0, r0
-	mcr	p15, 0, r0, c1, c0, 0		@ write control reg
-	mrc	p15, 0, r3, c0, c0, 0		@ read id reg
-	mov	r3, r3
-	mov	r3, r13
-	mov	pc, r3
-ENDPROC(__turn_mmu_on)
-
+	.ltorg
 
 /*
  * Setup the initial page tables.  We only setup the barest
@@ -213,7 +122,7 @@ ENDPROC(__turn_mmu_on)
  * r10 = procinfo
  *
  * Returns:
- *  r0, r3, r6, r7 corrupted
+ *  r0, r3, r5-r7 corrupted
  *  r4 = physical page table address
  */
 __create_page_tables:
@@ -235,20 +144,30 @@ __create_page_tables:
 	ldr	r7, [r10, #PROCINFO_MM_MMUFLAGS] @ mm_mmuflags
 
 	/*
-	 * Create identity mapping for first MB of kernel to
-	 * cater for the MMU enable.  This identity mapping
-	 * will be removed by paging_init().  We use our current program
-	 * counter to determine corresponding section base address.
+	 * Create identity mapping to cater for __enable_mmu.
+	 * This identity mapping will be removed by paging_init().
 	 */
-	mov	r6, pc
-	mov	r6, r6, lsr #20			@ start of kernel section
-	orr	r3, r7, r6, lsl #20		@ flags + kernel base
-	str	r3, [r4, r6, lsl #2]		@ identity mapping
+	adr	r0, __enable_mmu_loc
+	ldmia	r0, {r3, r5, r6}
+	sub	r0, r0, r3			@ virt->phys offset
+	add	r5, r5, r0			@ phys __enable_mmu
+	add	r6, r6, r0			@ phys __enable_mmu_end
+	mov	r5, r5, lsr #20
+	mov	r6, r6, lsr #20
+
+1:	orr	r3, r7, r5, lsl #20		@ flags + kernel base
+	str	r3, [r4, r5, lsl #2]		@ identity mapping
+	teq	r5, r6
+	addne	r5, r5, #1			@ next section
+	bne	1b
 
 	/*
 	 * Now setup the pagetables for our kernel direct
 	 * mapped region.
 	 */
+	mov	r3, pc
+	mov	r3, r3, lsr #20
+	orr	r3, r7, r3, lsl #20
 	add	r0, r4,  #(KERNEL_START & 0xff000000) >> 18
 	str	r3, [r0, #(KERNEL_START & 0x00f00000) >> 18]!
 	ldr	r6, =(KERNEL_END - 1)
@@ -289,24 +208,35 @@ __create_page_tables:
 	str	r6, [r0]
 
 #ifdef CONFIG_DEBUG_LL
-	ldr	r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
+#ifndef CONFIG_DEBUG_ICEDCC
 	/*
 	 * Map in IO space for serial debugging.
 	 * This allows debug messages to be output
 	 * via a serial console before paging_init.
 	 */
-	ldr	r3, [r8, #MACHINFO_PGOFFIO]
+	addruart r7, r3
+
+	mov	r3, r3, lsr #20
+	mov	r3, r3, lsl #2
+
 	add	r0, r4, r3
 	rsb	r3, r3, #0x4000			@ PTRS_PER_PGD*sizeof(long)
 	cmp	r3, #0x0800			@ limit to 512MB
 	movhi	r3, #0x0800
 	add	r6, r0, r3
-	ldr	r3, [r8, #MACHINFO_PHYSIO]
-	orr	r3, r3, r7
+	mov	r3, r7, lsr #20
+	ldr	r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
+	orr	r3, r7, r3, lsl #20
 1:	str	r3, [r0], #4
 	add	r3, r3, #1 << 20
 	teq	r0, r6
 	bne	1b
+
+#else /* CONFIG_DEBUG_ICEDCC */
+	/* we don't need any serial debugging mappings for ICEDCC */
+	ldr	r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
+#endif /* !CONFIG_DEBUG_ICEDCC */
+
 #if defined(CONFIG_ARCH_NETWINDER) || defined(CONFIG_ARCH_CATS)
 	/*
 	 * If we're using the NetWinder or CATS, we also need to map
@@ -332,5 +262,168 @@ __create_page_tables:
 	mov	pc, lr
 ENDPROC(__create_page_tables)
 	.ltorg
+__enable_mmu_loc:
+	.long	.
+	.long	__enable_mmu
+	.long	__enable_mmu_end
+
+#if defined(CONFIG_SMP)
+	__CPUINIT
+ENTRY(secondary_startup)
+	/*
+	 * Common entry point for secondary CPUs.
+	 *
+	 * Ensure that we're in SVC mode, and IRQs are disabled.  Lookup
+	 * the processor type - there is no need to check the machine type
+	 * as it has already been validated by the primary processor.
+	 */
+	setmode	PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9
+	mrc	p15, 0, r9, c0, c0		@ get processor id
+	bl	__lookup_processor_type
+	movs	r10, r5				@ invalid processor?
+	moveq	r0, #'p'			@ yes, error 'p'
+	beq	__error_p
+
+	/*
+	 * Use the page tables supplied from  __cpu_up.
+	 */
+	adr	r4, __secondary_data
+	ldmia	r4, {r5, r7, r12}		@ address to jump to after
+	sub	r4, r4, r5			@ mmu has been enabled
+	ldr	r4, [r7, r4]			@ get secondary_data.pgdir
+	adr	lr, BSYM(__enable_mmu)		@ return address
+	mov	r13, r12			@ __secondary_switched address
+ ARM(	add	pc, r10, #PROCINFO_INITFUNC	) @ initialise processor
+						  @ (return control reg)
+ THUMB(	add	r12, r10, #PROCINFO_INITFUNC	)
+ THUMB(	mov	pc, r12				)
+ENDPROC(secondary_startup)
+
+	/*
+	 * r6  = &secondary_data
+	 */
+ENTRY(__secondary_switched)
+	ldr	sp, [r7, #4]			@ get secondary_data.stack
+	mov	fp, #0
+	b	secondary_start_kernel
+ENDPROC(__secondary_switched)
+
+	.type	__secondary_data, %object
+__secondary_data:
+	.long	.
+	.long	secondary_data
+	.long	__secondary_switched
+#endif /* defined(CONFIG_SMP) */
+
+
+
+/*
+ * Setup common bits before finally enabling the MMU.  Essentially
+ * this is just loading the page table pointer and domain access
+ * registers.
+ *
+ *  r0  = cp#15 control register
+ *  r1  = machine ID
+ *  r2  = atags pointer
+ *  r4  = page table pointer
+ *  r9  = processor ID
+ *  r13 = *virtual* address to jump to upon completion
+ */
+__enable_mmu:
+#ifdef CONFIG_ALIGNMENT_TRAP
+	orr	r0, r0, #CR_A
+#else
+	bic	r0, r0, #CR_A
+#endif
+#ifdef CONFIG_CPU_DCACHE_DISABLE
+	bic	r0, r0, #CR_C
+#endif
+#ifdef CONFIG_CPU_BPREDICT_DISABLE
+	bic	r0, r0, #CR_Z
+#endif
+#ifdef CONFIG_CPU_ICACHE_DISABLE
+	bic	r0, r0, #CR_I
+#endif
+	mov	r5, #(domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \
+		      domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \
+		      domain_val(DOMAIN_TABLE, DOMAIN_MANAGER) | \
+		      domain_val(DOMAIN_IO, DOMAIN_CLIENT))
+	mcr	p15, 0, r5, c3, c0, 0		@ load domain access register
+	mcr	p15, 0, r4, c2, c0, 0		@ load page table pointer
+	b	__turn_mmu_on
+ENDPROC(__enable_mmu)
+
+/*
+ * Enable the MMU.  This completely changes the structure of the visible
+ * memory space.  You will not be able to trace execution through this.
+ * If you have an enquiry about this, *please* check the linux-arm-kernel
+ * mailing list archives BEFORE sending another post to the list.
+ *
+ *  r0  = cp#15 control register
+ *  r1  = machine ID
+ *  r2  = atags pointer
+ *  r9  = processor ID
+ *  r13 = *virtual* address to jump to upon completion
+ *
+ * other registers depend on the function called upon completion
+ */
+	.align	5
+__turn_mmu_on:
+	mov	r0, r0
+	mcr	p15, 0, r0, c1, c0, 0		@ write control reg
+	mrc	p15, 0, r3, c0, c0, 0		@ read id reg
+	mov	r3, r3
+	mov	r3, r13
+	mov	pc, r3
+__enable_mmu_end:
+ENDPROC(__turn_mmu_on)
+
+
+#ifdef CONFIG_SMP_ON_UP
+__fixup_smp:
+	mov	r7, #0x00070000
+	orr	r6, r7, #0xff000000	@ mask 0xff070000
+	orr	r7, r7, #0x41000000	@ val 0x41070000
+	and	r0, r9, r6
+	teq	r0, r7			@ ARM CPU and ARMv6/v7?
+	bne	__fixup_smp_on_up	@ no, assume UP
+
+	orr	r6, r6, #0x0000ff00
+	orr	r6, r6, #0x000000f0	@ mask 0xff07fff0
+	orr	r7, r7, #0x0000b000
+	orr	r7, r7, #0x00000020	@ val 0x4107b020
+	and	r0, r9, r6
+	teq	r0, r7			@ ARM 11MPCore?
+	moveq	pc, lr			@ yes, assume SMP
+
+	mrc	p15, 0, r0, c0, c0, 5	@ read MPIDR
+	tst	r0, #1 << 31
+	movne	pc, lr			@ bit 31 => SMP
+
+__fixup_smp_on_up:
+	adr	r0, 1f
+	ldmia	r0, {r3, r6, r7}
+	sub	r3, r0, r3
+	add	r6, r6, r3
+	add	r7, r7, r3
+2:	cmp	r6, r7
+	ldmia	r6!, {r0, r4}
+	strlo	r4, [r0, r3]
+	blo	2b
+	mov	pc, lr
+ENDPROC(__fixup_smp)
+
+1:	.word	.
+	.word	__smpalt_begin
+	.word	__smpalt_end
+
+	.pushsection .data
+	.globl	smp_on_up
+smp_on_up:
+	ALT_SMP(.long	1)
+	ALT_UP(.long	0)
+	.popsection
+
+#endif
 
 #include "head-common.S"
diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
new file mode 100644
index 00000000000..54593b0c241
--- /dev/null
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -0,0 +1,849 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2009, 2010 ARM Limited
+ *
+ * Author: Will Deacon <will.deacon@arm.com>
+ */
+
+/*
+ * HW_breakpoint: a unified kernel/user-space hardware breakpoint facility,
+ * using the CPU's debug registers.
+ */
+#define pr_fmt(fmt) "hw-breakpoint: " fmt
+
+#include <linux/errno.h>
+#include <linux/perf_event.h>
+#include <linux/hw_breakpoint.h>
+#include <linux/smp.h>
+
+#include <asm/cacheflush.h>
+#include <asm/cputype.h>
+#include <asm/current.h>
+#include <asm/hw_breakpoint.h>
+#include <asm/kdebug.h>
+#include <asm/system.h>
+#include <asm/traps.h>
+
+/* Breakpoint currently in use for each BRP. */
+static DEFINE_PER_CPU(struct perf_event *, bp_on_reg[ARM_MAX_BRP]);
+
+/* Watchpoint currently in use for each WRP. */
+static DEFINE_PER_CPU(struct perf_event *, wp_on_reg[ARM_MAX_WRP]);
+
+/* Number of BRP/WRP registers on this CPU. */
+static int core_num_brps;
+static int core_num_wrps;
+
+/* Debug architecture version. */
+static u8 debug_arch;
+
+/* Maximum supported watchpoint length. */
+static u8 max_watchpoint_len;
+
+/* Determine number of BRP registers available. */
+static int get_num_brps(void)
+{
+	u32 didr;
+	ARM_DBG_READ(c0, 0, didr);
+	return ((didr >> 24) & 0xf) + 1;
+}
+
+/* Determine number of WRP registers available. */
+static int get_num_wrps(void)
+{
+	/*
+	 * FIXME: When a watchpoint fires, the only way to work out which
+	 * watchpoint it was is by disassembling the faulting instruction
+	 * and working out the address of the memory access.
+	 *
+	 * Furthermore, we can only do this if the watchpoint was precise
+	 * since imprecise watchpoints prevent us from calculating register
+	 * based addresses.
+	 *
+	 * For the time being, we only report 1 watchpoint register so we
+	 * always know which watchpoint fired. In the future we can either
+	 * add a disassembler and address generation emulator, or we can
+	 * insert a check to see if the DFAR is set on watchpoint exception
+	 * entry [the ARM ARM states that the DFAR is UNKNOWN, but
+	 * experience shows that it is set on some implementations].
+	 */
+
+#if 0
+	u32 didr, wrps;
+	ARM_DBG_READ(c0, 0, didr);
+	return ((didr >> 28) & 0xf) + 1;
+#endif
+
+	return 1;
+}
+
+int hw_breakpoint_slots(int type)
+{
+	/*
+	 * We can be called early, so don't rely on
+	 * our static variables being initialised.
+	 */
+	switch (type) {
+	case TYPE_INST:
+		return get_num_brps();
+	case TYPE_DATA:
+		return get_num_wrps();
+	default:
+		pr_warning("unknown slot type: %d\n", type);
+		return 0;
+	}
+}
+
+/* Determine debug architecture. */
+static u8 get_debug_arch(void)
+{
+	u32 didr;
+
+	/* Do we implement the extended CPUID interface? */
+	if (((read_cpuid_id() >> 16) & 0xf) != 0xf) {
+		pr_warning("CPUID feature registers not supported. "
+				"Assuming v6 debug is present.\n");
+		return ARM_DEBUG_ARCH_V6;
+	}
+
+	ARM_DBG_READ(c0, 0, didr);
+	return (didr >> 16) & 0xf;
+}
+
+/* Does this core support mismatch breakpoints? */
+static int core_has_mismatch_bps(void)
+{
+	return debug_arch >= ARM_DEBUG_ARCH_V7_ECP14 && core_num_brps > 1;
+}
+
+u8 arch_get_debug_arch(void)
+{
+	return debug_arch;
+}
+
+#define READ_WB_REG_CASE(OP2, M, VAL)		\
+	case ((OP2 << 4) + M):			\
+		ARM_DBG_READ(c ## M, OP2, VAL); \
+		break
+
+#define WRITE_WB_REG_CASE(OP2, M, VAL)		\
+	case ((OP2 << 4) + M):			\
+		ARM_DBG_WRITE(c ## M, OP2, VAL);\
+		break
+
+#define GEN_READ_WB_REG_CASES(OP2, VAL)		\
+	READ_WB_REG_CASE(OP2, 0, VAL);		\
+	READ_WB_REG_CASE(OP2, 1, VAL);		\
+	READ_WB_REG_CASE(OP2, 2, VAL);		\
+	READ_WB_REG_CASE(OP2, 3, VAL);		\
+	READ_WB_REG_CASE(OP2, 4, VAL);		\
+	READ_WB_REG_CASE(OP2, 5, VAL);		\
+	READ_WB_REG_CASE(OP2, 6, VAL);		\
+	READ_WB_REG_CASE(OP2, 7, VAL);		\
+	READ_WB_REG_CASE(OP2, 8, VAL);		\
+	READ_WB_REG_CASE(OP2, 9, VAL);		\
+	READ_WB_REG_CASE(OP2, 10, VAL);		\
+	READ_WB_REG_CASE(OP2, 11, VAL);		\
+	READ_WB_REG_CASE(OP2, 12, VAL);		\
+	READ_WB_REG_CASE(OP2, 13, VAL);		\
+	READ_WB_REG_CASE(OP2, 14, VAL);		\
+	READ_WB_REG_CASE(OP2, 15, VAL)
+
+#define GEN_WRITE_WB_REG_CASES(OP2, VAL)	\
+	WRITE_WB_REG_CASE(OP2, 0, VAL);		\
+	WRITE_WB_REG_CASE(OP2, 1, VAL);		\
+	WRITE_WB_REG_CASE(OP2, 2, VAL);		\
+	WRITE_WB_REG_CASE(OP2, 3, VAL);		\
+	WRITE_WB_REG_CASE(OP2, 4, VAL);		\
+	WRITE_WB_REG_CASE(OP2, 5, VAL);		\
+	WRITE_WB_REG_CASE(OP2, 6, VAL);		\
+	WRITE_WB_REG_CASE(OP2, 7, VAL);		\
+	WRITE_WB_REG_CASE(OP2, 8, VAL);		\
+	WRITE_WB_REG_CASE(OP2, 9, VAL);		\
+	WRITE_WB_REG_CASE(OP2, 10, VAL);	\
+	WRITE_WB_REG_CASE(OP2, 11, VAL);	\
+	WRITE_WB_REG_CASE(OP2, 12, VAL);	\
+	WRITE_WB_REG_CASE(OP2, 13, VAL);	\
+	WRITE_WB_REG_CASE(OP2, 14, VAL);	\
+	WRITE_WB_REG_CASE(OP2, 15, VAL)
+
+static u32 read_wb_reg(int n)
+{
+	u32 val = 0;
+
+	switch (n) {
+	GEN_READ_WB_REG_CASES(ARM_OP2_BVR, val);
+	GEN_READ_WB_REG_CASES(ARM_OP2_BCR, val);
+	GEN_READ_WB_REG_CASES(ARM_OP2_WVR, val);
+	GEN_READ_WB_REG_CASES(ARM_OP2_WCR, val);
+	default:
+		pr_warning("attempt to read from unknown breakpoint "
+				"register %d\n", n);
+	}
+
+	return val;
+}
+
+static void write_wb_reg(int n, u32 val)
+{
+	switch (n) {
+	GEN_WRITE_WB_REG_CASES(ARM_OP2_BVR, val);
+	GEN_WRITE_WB_REG_CASES(ARM_OP2_BCR, val);
+	GEN_WRITE_WB_REG_CASES(ARM_OP2_WVR, val);
+	GEN_WRITE_WB_REG_CASES(ARM_OP2_WCR, val);
+	default:
+		pr_warning("attempt to write to unknown breakpoint "
+				"register %d\n", n);
+	}
+	isb();
+}
+
+/*
+ * In order to access the breakpoint/watchpoint control registers,
+ * we must be running in debug monitor mode. Unfortunately, we can
+ * be put into halting debug mode at any time by an external debugger
+ * but there is nothing we can do to prevent that.
+ */
+static int enable_monitor_mode(void)
+{
+	u32 dscr;
+	int ret = 0;
+
+	ARM_DBG_READ(c1, 0, dscr);
+
+	/* Ensure that halting mode is disabled. */
+	if (WARN_ONCE(dscr & ARM_DSCR_HDBGEN, "halting debug mode enabled."
+				"Unable to access hardware resources.")) {
+		ret = -EPERM;
+		goto out;
+	}
+
+	/* Write to the corresponding DSCR. */
+	switch (debug_arch) {
+	case ARM_DEBUG_ARCH_V6:
+	case ARM_DEBUG_ARCH_V6_1:
+		ARM_DBG_WRITE(c1, 0, (dscr | ARM_DSCR_MDBGEN));
+		break;
+	case ARM_DEBUG_ARCH_V7_ECP14:
+		ARM_DBG_WRITE(c2, 2, (dscr | ARM_DSCR_MDBGEN));
+		break;
+	default:
+		ret = -ENODEV;
+		goto out;
+	}
+
+	/* Check that the write made it through. */
+	ARM_DBG_READ(c1, 0, dscr);
+	if (WARN_ONCE(!(dscr & ARM_DSCR_MDBGEN),
+				"failed to enable monitor mode.")) {
+		ret = -EPERM;
+	}
+
+out:
+	return ret;
+}
+
+/*
+ * Check if 8-bit byte-address select is available.
+ * This clobbers WRP 0.
+ */
+static u8 get_max_wp_len(void)
+{
+	u32 ctrl_reg;
+	struct arch_hw_breakpoint_ctrl ctrl;
+	u8 size = 4;
+
+	if (debug_arch < ARM_DEBUG_ARCH_V7_ECP14)
+		goto out;
+
+	if (enable_monitor_mode())
+		goto out;
+
+	memset(&ctrl, 0, sizeof(ctrl));
+	ctrl.len = ARM_BREAKPOINT_LEN_8;
+	ctrl_reg = encode_ctrl_reg(ctrl);
+
+	write_wb_reg(ARM_BASE_WVR, 0);
+	write_wb_reg(ARM_BASE_WCR, ctrl_reg);
+	if ((read_wb_reg(ARM_BASE_WCR) & ctrl_reg) == ctrl_reg)
+		size = 8;
+
+out:
+	return size;
+}
+
+u8 arch_get_max_wp_len(void)
+{
+	return max_watchpoint_len;
+}
+
+/*
+ * Handler for reactivating a suspended watchpoint when the single
+ * step `mismatch' breakpoint is triggered.
+ */
+static void wp_single_step_handler(struct perf_event *bp, int unused,
+				   struct perf_sample_data *data,
+				   struct pt_regs *regs)
+{
+	perf_event_enable(counter_arch_bp(bp)->suspended_wp);
+	unregister_hw_breakpoint(bp);
+}
+
+static int bp_is_single_step(struct perf_event *bp)
+{
+	return bp->overflow_handler == wp_single_step_handler;
+}
+
+/*
+ * Install a perf counter breakpoint.
+ */
+int arch_install_hw_breakpoint(struct perf_event *bp)
+{
+	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+	struct perf_event **slot, **slots;
+	int i, max_slots, ctrl_base, val_base, ret = 0;
+
+	/* Ensure that we are in monitor mode and halting mode is disabled. */
+	ret = enable_monitor_mode();
+	if (ret)
+		goto out;
+
+	if (info->ctrl.type == ARM_BREAKPOINT_EXECUTE) {
+		/* Breakpoint */
+		ctrl_base = ARM_BASE_BCR;
+		val_base = ARM_BASE_BVR;
+		slots = __get_cpu_var(bp_on_reg);
+		max_slots = core_num_brps - 1;
+
+		if (bp_is_single_step(bp)) {
+			info->ctrl.mismatch = 1;
+			i = max_slots;
+			slots[i] = bp;
+			goto setup;
+		}
+	} else {
+		/* Watchpoint */
+		ctrl_base = ARM_BASE_WCR;
+		val_base = ARM_BASE_WVR;
+		slots = __get_cpu_var(wp_on_reg);
+		max_slots = core_num_wrps;
+	}
+
+	for (i = 0; i < max_slots; ++i) {
+		slot = &slots[i];
+
+		if (!*slot) {
+			*slot = bp;
+			break;
+		}
+	}
+
+	if (WARN_ONCE(i == max_slots, "Can't find any breakpoint slot")) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+setup:
+	/* Setup the address register. */
+	write_wb_reg(val_base + i, info->address);
+
+	/* Setup the control register. */
+	write_wb_reg(ctrl_base + i, encode_ctrl_reg(info->ctrl) | 0x1);
+
+out:
+	return ret;
+}
+
+void arch_uninstall_hw_breakpoint(struct perf_event *bp)
+{
+	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+	struct perf_event **slot, **slots;
+	int i, max_slots, base;
+
+	if (info->ctrl.type == ARM_BREAKPOINT_EXECUTE) {
+		/* Breakpoint */
+		base = ARM_BASE_BCR;
+		slots = __get_cpu_var(bp_on_reg);
+		max_slots = core_num_brps - 1;
+
+		if (bp_is_single_step(bp)) {
+			i = max_slots;
+			slots[i] = NULL;
+			goto reset;
+		}
+	} else {
+		/* Watchpoint */
+		base = ARM_BASE_WCR;
+		slots = __get_cpu_var(wp_on_reg);
+		max_slots = core_num_wrps;
+	}
+
+	/* Remove the breakpoint. */
+	for (i = 0; i < max_slots; ++i) {
+		slot = &slots[i];
+
+		if (*slot == bp) {
+			*slot = NULL;
+			break;
+		}
+	}
+
+	if (WARN_ONCE(i == max_slots, "Can't find any breakpoint slot"))
+		return;
+
+reset:
+	/* Reset the control register. */
+	write_wb_reg(base + i, 0);
+}
+
+static int get_hbp_len(u8 hbp_len)
+{
+	unsigned int len_in_bytes = 0;
+
+	switch (hbp_len) {
+	case ARM_BREAKPOINT_LEN_1:
+		len_in_bytes = 1;
+		break;
+	case ARM_BREAKPOINT_LEN_2:
+		len_in_bytes = 2;
+		break;
+	case ARM_BREAKPOINT_LEN_4:
+		len_in_bytes = 4;
+		break;
+	case ARM_BREAKPOINT_LEN_8:
+		len_in_bytes = 8;
+		break;
+	}
+
+	return len_in_bytes;
+}
+
+/*
+ * Check whether bp virtual address is in kernel space.
+ */
+int arch_check_bp_in_kernelspace(struct perf_event *bp)
+{
+	unsigned int len;
+	unsigned long va;
+	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+
+	va = info->address;
+	len = get_hbp_len(info->ctrl.len);
+
+	return (va >= TASK_SIZE) && ((va + len - 1) >= TASK_SIZE);
+}
+
+/*
+ * Extract generic type and length encodings from an arch_hw_breakpoint_ctrl.
+ * Hopefully this will disappear when ptrace can bypass the conversion
+ * to generic breakpoint descriptions.
+ */
+int arch_bp_generic_fields(struct arch_hw_breakpoint_ctrl ctrl,
+			   int *gen_len, int *gen_type)
+{
+	/* Type */
+	switch (ctrl.type) {
+	case ARM_BREAKPOINT_EXECUTE:
+		*gen_type = HW_BREAKPOINT_X;
+		break;
+	case ARM_BREAKPOINT_LOAD:
+		*gen_type = HW_BREAKPOINT_R;
+		break;
+	case ARM_BREAKPOINT_STORE:
+		*gen_type = HW_BREAKPOINT_W;
+		break;
+	case ARM_BREAKPOINT_LOAD | ARM_BREAKPOINT_STORE:
+		*gen_type = HW_BREAKPOINT_RW;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* Len */
+	switch (ctrl.len) {
+	case ARM_BREAKPOINT_LEN_1:
+		*gen_len = HW_BREAKPOINT_LEN_1;
+		break;
+	case ARM_BREAKPOINT_LEN_2:
+		*gen_len = HW_BREAKPOINT_LEN_2;
+		break;
+	case ARM_BREAKPOINT_LEN_4:
+		*gen_len = HW_BREAKPOINT_LEN_4;
+		break;
+	case ARM_BREAKPOINT_LEN_8:
+		*gen_len = HW_BREAKPOINT_LEN_8;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/*
+ * Construct an arch_hw_breakpoint from a perf_event.
+ */
+static int arch_build_bp_info(struct perf_event *bp)
+{
+	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+
+	/* Type */
+	switch (bp->attr.bp_type) {
+	case HW_BREAKPOINT_X:
+		info->ctrl.type = ARM_BREAKPOINT_EXECUTE;
+		break;
+	case HW_BREAKPOINT_R:
+		info->ctrl.type = ARM_BREAKPOINT_LOAD;
+		break;
+	case HW_BREAKPOINT_W:
+		info->ctrl.type = ARM_BREAKPOINT_STORE;
+		break;
+	case HW_BREAKPOINT_RW:
+		info->ctrl.type = ARM_BREAKPOINT_LOAD | ARM_BREAKPOINT_STORE;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* Len */
+	switch (bp->attr.bp_len) {
+	case HW_BREAKPOINT_LEN_1:
+		info->ctrl.len = ARM_BREAKPOINT_LEN_1;
+		break;
+	case HW_BREAKPOINT_LEN_2:
+		info->ctrl.len = ARM_BREAKPOINT_LEN_2;
+		break;
+	case HW_BREAKPOINT_LEN_4:
+		info->ctrl.len = ARM_BREAKPOINT_LEN_4;
+		break;
+	case HW_BREAKPOINT_LEN_8:
+		info->ctrl.len = ARM_BREAKPOINT_LEN_8;
+		if ((info->ctrl.type != ARM_BREAKPOINT_EXECUTE)
+			&& max_watchpoint_len >= 8)
+			break;
+	default:
+		return -EINVAL;
+	}
+
+	/* Address */
+	info->address = bp->attr.bp_addr;
+
+	/* Privilege */
+	info->ctrl.privilege = ARM_BREAKPOINT_USER;
+	if (arch_check_bp_in_kernelspace(bp) && !bp_is_single_step(bp))
+		info->ctrl.privilege |= ARM_BREAKPOINT_PRIV;
+
+	/* Enabled? */
+	info->ctrl.enabled = !bp->attr.disabled;
+
+	/* Mismatch */
+	info->ctrl.mismatch = 0;
+
+	return 0;
+}
+
+/*
+ * Validate the arch-specific HW Breakpoint register settings.
+ */
+int arch_validate_hwbkpt_settings(struct perf_event *bp)
+{
+	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+	int ret = 0;
+	u32 bytelen, max_len, offset, alignment_mask = 0x3;
+
+	/* Build the arch_hw_breakpoint. */
+	ret = arch_build_bp_info(bp);
+	if (ret)
+		goto out;
+
+	/* Check address alignment. */
+	if (info->ctrl.len == ARM_BREAKPOINT_LEN_8)
+		alignment_mask = 0x7;
+	if (info->address & alignment_mask) {
+		/*
+		 * Try to fix the alignment. This may result in a length
+		 * that is too large, so we must check for that.
+		 */
+		bytelen = get_hbp_len(info->ctrl.len);
+		max_len = info->ctrl.type == ARM_BREAKPOINT_EXECUTE ? 4 :
+				max_watchpoint_len;
+
+		if (max_len >= 8)
+			offset = info->address & 0x7;
+		else
+			offset = info->address & 0x3;
+
+		if (bytelen > (1 << ((max_len - (offset + 1)) >> 1))) {
+			ret = -EFBIG;
+			goto out;
+		}
+
+		info->ctrl.len <<= offset;
+		info->address &= ~offset;
+
+		pr_debug("breakpoint alignment fixup: length = 0x%x, "
+			"address = 0x%x\n", info->ctrl.len, info->address);
+	}
+
+	/*
+	 * Currently we rely on an overflow handler to take
+	 * care of single-stepping the breakpoint when it fires.
+	 * In the case of userspace breakpoints on a core with V7 debug,
+	 * we can use the mismatch feature as a poor-man's hardware single-step.
+	 */
+	if (WARN_ONCE(!bp->overflow_handler &&
+		(arch_check_bp_in_kernelspace(bp) || !core_has_mismatch_bps()),
+			"overflow handler required but none found")) {
+		ret = -EINVAL;
+		goto out;
+	}
+out:
+	return ret;
+}
+
+static void update_mismatch_flag(int idx, int flag)
+{
+	struct perf_event *bp = __get_cpu_var(bp_on_reg[idx]);
+	struct arch_hw_breakpoint *info;
+
+	if (bp == NULL)
+		return;
+
+	info = counter_arch_bp(bp);
+
+	/* Update the mismatch field to enter/exit `single-step' mode */
+	if (!bp->overflow_handler && info->ctrl.mismatch != flag) {
+		info->ctrl.mismatch = flag;
+		write_wb_reg(ARM_BASE_BCR + idx, encode_ctrl_reg(info->ctrl) | 0x1);
+	}
+}
+
+static void watchpoint_handler(unsigned long unknown, struct pt_regs *regs)
+{
+	int i;
+	struct perf_event *bp, **slots = __get_cpu_var(wp_on_reg);
+	struct arch_hw_breakpoint *info;
+	struct perf_event_attr attr;
+
+	/* Without a disassembler, we can only handle 1 watchpoint. */
+	BUG_ON(core_num_wrps > 1);
+
+	hw_breakpoint_init(&attr);
+	attr.bp_addr	= regs->ARM_pc & ~0x3;
+	attr.bp_len	= HW_BREAKPOINT_LEN_4;
+	attr.bp_type	= HW_BREAKPOINT_X;
+
+	for (i = 0; i < core_num_wrps; ++i) {
+		rcu_read_lock();
+
+		if (slots[i] == NULL) {
+			rcu_read_unlock();
+			continue;
+		}
+
+		/*
+		 * The DFAR is an unknown value. Since we only allow a
+		 * single watchpoint, we can set the trigger to the lowest
+		 * possible faulting address.
+		 */
+		info = counter_arch_bp(slots[i]);
+		info->trigger = slots[i]->attr.bp_addr;
+		pr_debug("watchpoint fired: address = 0x%x\n", info->trigger);
+		perf_bp_event(slots[i], regs);
+
+		/*
+		 * If no overflow handler is present, insert a temporary
+		 * mismatch breakpoint so we can single-step over the
+		 * watchpoint trigger.
+		 */
+		if (!slots[i]->overflow_handler) {
+			bp = register_user_hw_breakpoint(&attr,
+							 wp_single_step_handler,
+							 current);
+			counter_arch_bp(bp)->suspended_wp = slots[i];
+			perf_event_disable(slots[i]);
+		}
+
+		rcu_read_unlock();
+	}
+}
+
+static void breakpoint_handler(unsigned long unknown, struct pt_regs *regs)
+{
+	int i;
+	int mismatch;
+	u32 ctrl_reg, val, addr;
+	struct perf_event *bp, **slots = __get_cpu_var(bp_on_reg);
+	struct arch_hw_breakpoint *info;
+	struct arch_hw_breakpoint_ctrl ctrl;
+
+	/* The exception entry code places the amended lr in the PC. */
+	addr = regs->ARM_pc;
+
+	for (i = 0; i < core_num_brps; ++i) {
+		rcu_read_lock();
+
+		bp = slots[i];
+
+		if (bp == NULL) {
+			rcu_read_unlock();
+			continue;
+		}
+
+		mismatch = 0;
+
+		/* Check if the breakpoint value matches. */
+		val = read_wb_reg(ARM_BASE_BVR + i);
+		if (val != (addr & ~0x3))
+			goto unlock;
+
+		/* Possible match, check the byte address select to confirm. */
+		ctrl_reg = read_wb_reg(ARM_BASE_BCR + i);
+		decode_ctrl_reg(ctrl_reg, &ctrl);
+		if ((1 << (addr & 0x3)) & ctrl.len) {
+			mismatch = 1;
+			info = counter_arch_bp(bp);
+			info->trigger = addr;
+		}
+
+unlock:
+		if ((mismatch && !info->ctrl.mismatch) || bp_is_single_step(bp)) {
+			pr_debug("breakpoint fired: address = 0x%x\n", addr);
+			perf_bp_event(bp, regs);
+		}
+
+		update_mismatch_flag(i, mismatch);
+		rcu_read_unlock();
+	}
+}
+
+/*
+ * Called from either the Data Abort Handler [watchpoint] or the
+ * Prefetch Abort Handler [breakpoint].
+ */
+static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr,
+				 struct pt_regs *regs)
+{
+	int ret = 1; /* Unhandled fault. */
+	u32 dscr;
+
+	/* We only handle watchpoints and hardware breakpoints. */
+	ARM_DBG_READ(c1, 0, dscr);
+
+	/* Perform perf callbacks. */
+	switch (ARM_DSCR_MOE(dscr)) {
+	case ARM_ENTRY_BREAKPOINT:
+		breakpoint_handler(addr, regs);
+		break;
+	case ARM_ENTRY_ASYNC_WATCHPOINT:
+		WARN_ON("Asynchronous watchpoint exception taken. "
+			"Debugging results may be unreliable");
+	case ARM_ENTRY_SYNC_WATCHPOINT:
+		watchpoint_handler(addr, regs);
+		break;
+	default:
+		goto out;
+	}
+
+	ret = 0;
+out:
+	return ret;
+}
+
+/*
+ * One-time initialisation.
+ */
+static void __init reset_ctrl_regs(void *unused)
+{
+	int i;
+
+	if (enable_monitor_mode())
+		return;
+
+	for (i = 0; i < core_num_brps; ++i) {
+		write_wb_reg(ARM_BASE_BCR + i, 0UL);
+		write_wb_reg(ARM_BASE_BVR + i, 0UL);
+	}
+
+	for (i = 0; i < core_num_wrps; ++i) {
+		write_wb_reg(ARM_BASE_WCR + i, 0UL);
+		write_wb_reg(ARM_BASE_WVR + i, 0UL);
+	}
+}
+
+static int __init arch_hw_breakpoint_init(void)
+{
+	int ret = 0;
+	u32 dscr;
+
+	debug_arch = get_debug_arch();
+
+	if (debug_arch > ARM_DEBUG_ARCH_V7_ECP14) {
+		pr_info("debug architecture 0x%x unsupported.\n", debug_arch);
+		ret = -ENODEV;
+		goto out;
+	}
+
+	/* Determine how many BRPs/WRPs are available. */
+	core_num_brps = get_num_brps();
+	core_num_wrps = get_num_wrps();
+
+	pr_info("found %d breakpoint and %d watchpoint registers.\n",
+			core_num_brps, core_num_wrps);
+
+	if (core_has_mismatch_bps())
+		pr_info("1 breakpoint reserved for watchpoint single-step.\n");
+
+	ARM_DBG_READ(c1, 0, dscr);
+	if (dscr & ARM_DSCR_HDBGEN) {
+		pr_warning("halting debug mode enabled. Assuming maximum "
+				"watchpoint size of 4 bytes.");
+	} else {
+		/* Work out the maximum supported watchpoint length. */
+		max_watchpoint_len = get_max_wp_len();
+		pr_info("maximum watchpoint size is %u bytes.\n",
+				max_watchpoint_len);
+
+		/*
+		 * Reset the breakpoint resources. We assume that a halting
+		 * debugger will leave the world in a nice state for us.
+		 */
+		smp_call_function(reset_ctrl_regs, NULL, 1);
+		reset_ctrl_regs(NULL);
+	}
+
+	/* Register debug fault handler. */
+	hook_fault_code(2, hw_breakpoint_pending, SIGTRAP, TRAP_HWBKPT,
+			"watchpoint debug exception");
+	hook_ifault_code(2, hw_breakpoint_pending, SIGTRAP, TRAP_HWBKPT,
+			"breakpoint debug exception");
+
+out:
+	return ret;
+}
+arch_initcall(arch_hw_breakpoint_init);
+
+void hw_breakpoint_pmu_read(struct perf_event *bp)
+{
+}
+
+/*
+ * Dummy function to register with die_notifier.
+ */
+int hw_breakpoint_exceptions_notify(struct notifier_block *unused,
+					unsigned long val, void *data)
+{
+	return NOTIFY_DONE;
+}
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index 6b4605893f1..d9bd786ce23 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -69,20 +69,31 @@ int module_frob_arch_sections(Elf_Ehdr *hdr,
 {
 #ifdef CONFIG_ARM_UNWIND
 	Elf_Shdr *s, *sechdrs_end = sechdrs + hdr->e_shnum;
+	struct arm_unwind_mapping *maps = mod->arch.map;
 
 	for (s = sechdrs; s < sechdrs_end; s++) {
-		if (strcmp(".ARM.exidx.init.text", secstrings + s->sh_name) == 0)
-			mod->arch.unw_sec_init = s;
-		else if (strcmp(".ARM.exidx.devinit.text", secstrings + s->sh_name) == 0)
-			mod->arch.unw_sec_devinit = s;
-		else if (strcmp(".ARM.exidx", secstrings + s->sh_name) == 0)
-			mod->arch.unw_sec_core = s;
-		else if (strcmp(".init.text", secstrings + s->sh_name) == 0)
-			mod->arch.sec_init_text = s;
-		else if (strcmp(".devinit.text", secstrings + s->sh_name) == 0)
-			mod->arch.sec_devinit_text = s;
-		else if (strcmp(".text", secstrings + s->sh_name) == 0)
-			mod->arch.sec_core_text = s;
+		char const *secname = secstrings + s->sh_name;
+
+		if (strcmp(".ARM.exidx.init.text", secname) == 0)
+			maps[ARM_SEC_INIT].unw_sec = s;
+		else if (strcmp(".ARM.exidx.devinit.text", secname) == 0)
+			maps[ARM_SEC_DEVINIT].unw_sec = s;
+		else if (strcmp(".ARM.exidx", secname) == 0)
+			maps[ARM_SEC_CORE].unw_sec = s;
+		else if (strcmp(".ARM.exidx.exit.text", secname) == 0)
+			maps[ARM_SEC_EXIT].unw_sec = s;
+		else if (strcmp(".ARM.exidx.devexit.text", secname) == 0)
+			maps[ARM_SEC_DEVEXIT].unw_sec = s;
+		else if (strcmp(".init.text", secname) == 0)
+			maps[ARM_SEC_INIT].sec_text = s;
+		else if (strcmp(".devinit.text", secname) == 0)
+			maps[ARM_SEC_DEVINIT].sec_text = s;
+		else if (strcmp(".text", secname) == 0)
+			maps[ARM_SEC_CORE].sec_text = s;
+		else if (strcmp(".exit.text", secname) == 0)
+			maps[ARM_SEC_EXIT].sec_text = s;
+		else if (strcmp(".devexit.text", secname) == 0)
+			maps[ARM_SEC_DEVEXIT].sec_text = s;
 	}
 #endif
 	return 0;
@@ -292,31 +303,22 @@ apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab,
 #ifdef CONFIG_ARM_UNWIND
 static void register_unwind_tables(struct module *mod)
 {
-	if (mod->arch.unw_sec_init && mod->arch.sec_init_text)
-		mod->arch.unwind_init =
-			unwind_table_add(mod->arch.unw_sec_init->sh_addr,
-					 mod->arch.unw_sec_init->sh_size,
-					 mod->arch.sec_init_text->sh_addr,
-					 mod->arch.sec_init_text->sh_size);
-	if (mod->arch.unw_sec_devinit && mod->arch.sec_devinit_text)
-		mod->arch.unwind_devinit =
-			unwind_table_add(mod->arch.unw_sec_devinit->sh_addr,
-					 mod->arch.unw_sec_devinit->sh_size,
-					 mod->arch.sec_devinit_text->sh_addr,
-					 mod->arch.sec_devinit_text->sh_size);
-	if (mod->arch.unw_sec_core && mod->arch.sec_core_text)
-		mod->arch.unwind_core =
-			unwind_table_add(mod->arch.unw_sec_core->sh_addr,
-					 mod->arch.unw_sec_core->sh_size,
-					 mod->arch.sec_core_text->sh_addr,
-					 mod->arch.sec_core_text->sh_size);
+	int i;
+	for (i = 0; i < ARM_SEC_MAX; ++i) {
+		struct arm_unwind_mapping *map = &mod->arch.map[i];
+		if (map->unw_sec && map->sec_text)
+			map->unwind = unwind_table_add(map->unw_sec->sh_addr,
+						       map->unw_sec->sh_size,
+						       map->sec_text->sh_addr,
+						       map->sec_text->sh_size);
+	}
 }
 
 static void unregister_unwind_tables(struct module *mod)
 {
-	unwind_table_del(mod->arch.unwind_init);
-	unwind_table_del(mod->arch.unwind_devinit);
-	unwind_table_del(mod->arch.unwind_core);
+	int i = ARM_SEC_MAX;
+	while (--i >= 0)
+		unwind_table_del(mod->arch.map[i].unwind);
 }
 #else
 static inline void register_unwind_tables(struct module *mod) { }
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 401e38be1f7..e76fcaadce0 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -29,6 +29,7 @@
 #include <linux/utsname.h>
 #include <linux/uaccess.h>
 #include <linux/random.h>
+#include <linux/hw_breakpoint.h>
 
 #include <asm/cacheflush.h>
 #include <asm/leds.h>
@@ -135,6 +136,25 @@ EXPORT_SYMBOL(pm_power_off);
 void (*arm_pm_restart)(char str, const char *cmd) = arm_machine_restart;
 EXPORT_SYMBOL_GPL(arm_pm_restart);
 
+static void do_nothing(void *unused)
+{
+}
+
+/*
+ * cpu_idle_wait - Used to ensure that all the CPUs discard old value of
+ * pm_idle and update to new pm_idle value. Required while changing pm_idle
+ * handler on SMP systems.
+ *
+ * Caller must have changed pm_idle to the new value before the call. Old
+ * pm_idle value will not be used by any CPU after the return of this function.
+ */
+void cpu_idle_wait(void)
+{
+	smp_mb();
+	/* kick all the CPUs so that they exit out of pm_idle */
+	smp_call_function(do_nothing, NULL, 1);
+}
+EXPORT_SYMBOL_GPL(cpu_idle_wait);
 
 /*
  * This is our default idle handler.  We need to disable
@@ -317,6 +337,8 @@ void flush_thread(void)
 	struct thread_info *thread = current_thread_info();
 	struct task_struct *tsk = current;
 
+	flush_ptrace_hw_breakpoint(tsk);
+
 	memset(thread->used_cp, 0, sizeof(thread->used_cp));
 	memset(&tsk->thread.debug, 0, sizeof(struct debug_info));
 	memset(&thread->fpstate, 0, sizeof(union fp_state));
@@ -345,6 +367,8 @@ copy_thread(unsigned long clone_flags, unsigned long stack_start,
 	thread->cpu_context.sp = (unsigned long)childregs;
 	thread->cpu_context.pc = (unsigned long)ret_from_fork;
 
+	clear_ptrace_hw_breakpoint(p);
+
 	if (clone_flags & CLONE_SETTLS)
 		thread->tp_value = regs->ARM_r3;
 
@@ -458,3 +482,24 @@ unsigned long arch_randomize_brk(struct mm_struct *mm)
 	unsigned long range_end = mm->brk + 0x02000000;
 	return randomize_range(mm->brk, range_end, 0) ? : mm->brk;
 }
+
+/*
+ * The vectors page is always readable from user space for the
+ * atomic helpers and the signal restart code.  Let's declare a mapping
+ * for it so it is visible through ptrace and /proc/<pid>/mem.
+ */
+
+int vectors_user_mapping(void)
+{
+	struct mm_struct *mm = current->mm;
+	return install_special_mapping(mm, 0xffff0000, PAGE_SIZE,
+				       VM_READ | VM_EXEC |
+				       VM_MAYREAD | VM_MAYEXEC |
+				       VM_ALWAYSDUMP | VM_RESERVED,
+				       NULL);
+}
+
+const char *arch_vma_name(struct vm_area_struct *vma)
+{
+	return (vma->vm_start == 0xffff0000) ? "[vectors]" : NULL;
+}
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index f99d489822d..e0cb6370ed1 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -19,6 +19,8 @@
 #include <linux/init.h>
 #include <linux/signal.h>
 #include <linux/uaccess.h>
+#include <linux/perf_event.h>
+#include <linux/hw_breakpoint.h>
 
 #include <asm/pgtable.h>
 #include <asm/system.h>
@@ -847,6 +849,232 @@ static int ptrace_setvfpregs(struct task_struct *tsk, void __user *data)
 }
 #endif
 
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+/*
+ * Convert a virtual register number into an index for a thread_info
+ * breakpoint array. Breakpoints are identified using positive numbers
+ * whilst watchpoints are negative. The registers are laid out as pairs
+ * of (address, control), each pair mapping to a unique hw_breakpoint struct.
+ * Register 0 is reserved for describing resource information.
+ */
+static int ptrace_hbp_num_to_idx(long num)
+{
+	if (num < 0)
+		num = (ARM_MAX_BRP << 1) - num;
+	return (num - 1) >> 1;
+}
+
+/*
+ * Returns the virtual register number for the address of the
+ * breakpoint at index idx.
+ */
+static long ptrace_hbp_idx_to_num(int idx)
+{
+	long mid = ARM_MAX_BRP << 1;
+	long num = (idx << 1) + 1;
+	return num > mid ? mid - num : num;
+}
+
+/*
+ * Handle hitting a HW-breakpoint.
+ */
+static void ptrace_hbptriggered(struct perf_event *bp, int unused,
+				     struct perf_sample_data *data,
+				     struct pt_regs *regs)
+{
+	struct arch_hw_breakpoint *bkpt = counter_arch_bp(bp);
+	long num;
+	int i;
+	siginfo_t info;
+
+	for (i = 0; i < ARM_MAX_HBP_SLOTS; ++i)
+		if (current->thread.debug.hbp[i] == bp)
+			break;
+
+	num = (i == ARM_MAX_HBP_SLOTS) ? 0 : ptrace_hbp_idx_to_num(i);
+
+	info.si_signo	= SIGTRAP;
+	info.si_errno	= (int)num;
+	info.si_code	= TRAP_HWBKPT;
+	info.si_addr	= (void __user *)(bkpt->trigger);
+
+	force_sig_info(SIGTRAP, &info, current);
+}
+
+/*
+ * Set ptrace breakpoint pointers to zero for this task.
+ * This is required in order to prevent child processes from unregistering
+ * breakpoints held by their parent.
+ */
+void clear_ptrace_hw_breakpoint(struct task_struct *tsk)
+{
+	memset(tsk->thread.debug.hbp, 0, sizeof(tsk->thread.debug.hbp));
+}
+
+/*
+ * Unregister breakpoints from this task and reset the pointers in
+ * the thread_struct.
+ */
+void flush_ptrace_hw_breakpoint(struct task_struct *tsk)
+{
+	int i;
+	struct thread_struct *t = &tsk->thread;
+
+	for (i = 0; i < ARM_MAX_HBP_SLOTS; i++) {
+		if (t->debug.hbp[i]) {
+			unregister_hw_breakpoint(t->debug.hbp[i]);
+			t->debug.hbp[i] = NULL;
+		}
+	}
+}
+
+static u32 ptrace_get_hbp_resource_info(void)
+{
+	u8 num_brps, num_wrps, debug_arch, wp_len;
+	u32 reg = 0;
+
+	num_brps	= hw_breakpoint_slots(TYPE_INST);
+	num_wrps	= hw_breakpoint_slots(TYPE_DATA);
+	debug_arch	= arch_get_debug_arch();
+	wp_len		= arch_get_max_wp_len();
+
+	reg		|= debug_arch;
+	reg		<<= 8;
+	reg		|= wp_len;
+	reg		<<= 8;
+	reg		|= num_wrps;
+	reg		<<= 8;
+	reg		|= num_brps;
+
+	return reg;
+}
+
+static struct perf_event *ptrace_hbp_create(struct task_struct *tsk, int type)
+{
+	struct perf_event_attr attr;
+
+	ptrace_breakpoint_init(&attr);
+
+	/* Initialise fields to sane defaults. */
+	attr.bp_addr	= 0;
+	attr.bp_len	= HW_BREAKPOINT_LEN_4;
+	attr.bp_type	= type;
+	attr.disabled	= 1;
+
+	return register_user_hw_breakpoint(&attr, ptrace_hbptriggered, tsk);
+}
+
+static int ptrace_gethbpregs(struct task_struct *tsk, long num,
+			     unsigned long  __user *data)
+{
+	u32 reg;
+	int idx, ret = 0;
+	struct perf_event *bp;
+	struct arch_hw_breakpoint_ctrl arch_ctrl;
+
+	if (num == 0) {
+		reg = ptrace_get_hbp_resource_info();
+	} else {
+		idx = ptrace_hbp_num_to_idx(num);
+		if (idx < 0 || idx >= ARM_MAX_HBP_SLOTS) {
+			ret = -EINVAL;
+			goto out;
+		}
+
+		bp = tsk->thread.debug.hbp[idx];
+		if (!bp) {
+			reg = 0;
+			goto put;
+		}
+
+		arch_ctrl = counter_arch_bp(bp)->ctrl;
+
+		/*
+		 * Fix up the len because we may have adjusted it
+		 * to compensate for an unaligned address.
+		 */
+		while (!(arch_ctrl.len & 0x1))
+			arch_ctrl.len >>= 1;
+
+		if (idx & 0x1)
+			reg = encode_ctrl_reg(arch_ctrl);
+		else
+			reg = bp->attr.bp_addr;
+	}
+
+put:
+	if (put_user(reg, data))
+		ret = -EFAULT;
+
+out:
+	return ret;
+}
+
+static int ptrace_sethbpregs(struct task_struct *tsk, long num,
+			     unsigned long __user *data)
+{
+	int idx, gen_len, gen_type, implied_type, ret = 0;
+	u32 user_val;
+	struct perf_event *bp;
+	struct arch_hw_breakpoint_ctrl ctrl;
+	struct perf_event_attr attr;
+
+	if (num == 0)
+		goto out;
+	else if (num < 0)
+		implied_type = HW_BREAKPOINT_RW;
+	else
+		implied_type = HW_BREAKPOINT_X;
+
+	idx = ptrace_hbp_num_to_idx(num);
+	if (idx < 0 || idx >= ARM_MAX_HBP_SLOTS) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	if (get_user(user_val, data)) {
+		ret = -EFAULT;
+		goto out;
+	}
+
+	bp = tsk->thread.debug.hbp[idx];
+	if (!bp) {
+		bp = ptrace_hbp_create(tsk, implied_type);
+		if (IS_ERR(bp)) {
+			ret = PTR_ERR(bp);
+			goto out;
+		}
+		tsk->thread.debug.hbp[idx] = bp;
+	}
+
+	attr = bp->attr;
+
+	if (num & 0x1) {
+		/* Address */
+		attr.bp_addr	= user_val;
+	} else {
+		/* Control */
+		decode_ctrl_reg(user_val, &ctrl);
+		ret = arch_bp_generic_fields(ctrl, &gen_len, &gen_type);
+		if (ret)
+			goto out;
+
+		if ((gen_type & implied_type) != gen_type) {
+				ret = -EINVAL;
+				goto out;
+		}
+
+		attr.bp_len	= gen_len;
+		attr.bp_type	= gen_type;
+		attr.disabled	= !ctrl.enabled;
+	}
+
+	ret = modify_user_hw_breakpoint(bp, &attr);
+out:
+	return ret;
+}
+#endif
+
 long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 {
 	int ret;
@@ -916,6 +1144,17 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 			break;
 #endif
 
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+		case PTRACE_GETHBPREGS:
+			ret = ptrace_gethbpregs(child, addr,
+						(unsigned long __user *)data);
+			break;
+		case PTRACE_SETHBPREGS:
+			ret = ptrace_sethbpregs(child, addr,
+						(unsigned long __user *)data);
+			break;
+#endif
+
 		default:
 			ret = ptrace_request(child, request, addr, data);
 			break;
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index d5231ae7355..336f14e0e5c 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -36,6 +36,7 @@
 #include <asm/procinfo.h>
 #include <asm/sections.h>
 #include <asm/setup.h>
+#include <asm/smp_plat.h>
 #include <asm/mach-types.h>
 #include <asm/cacheflush.h>
 #include <asm/cachetype.h>
@@ -238,6 +239,35 @@ int cpu_architecture(void)
 	return cpu_arch;
 }
 
+static int cpu_has_aliasing_icache(unsigned int arch)
+{
+	int aliasing_icache;
+	unsigned int id_reg, num_sets, line_size;
+
+	/* arch specifies the register format */
+	switch (arch) {
+	case CPU_ARCH_ARMv7:
+		asm("mcr	p15, 2, %0, c0, c0, 0 @ set CSSELR"
+		    : /* No output operands */
+		    : "r" (1));
+		isb();
+		asm("mrc	p15, 1, %0, c0, c0, 0 @ read CCSIDR"
+		    : "=r" (id_reg));
+		line_size = 4 << ((id_reg & 0x7) + 2);
+		num_sets = ((id_reg >> 13) & 0x7fff) + 1;
+		aliasing_icache = (line_size * num_sets) > PAGE_SIZE;
+		break;
+	case CPU_ARCH_ARMv6:
+		aliasing_icache = read_cpuid_cachetype() & (1 << 11);
+		break;
+	default:
+		/* I-cache aliases will be handled by D-cache aliasing code */
+		aliasing_icache = 0;
+	}
+
+	return aliasing_icache;
+}
+
 static void __init cacheid_init(void)
 {
 	unsigned int cachetype = read_cpuid_cachetype();
@@ -249,10 +279,15 @@ static void __init cacheid_init(void)
 			cacheid = CACHEID_VIPT_NONALIASING;
 			if ((cachetype & (3 << 14)) == 1 << 14)
 				cacheid |= CACHEID_ASID_TAGGED;
-		} else if (cachetype & (1 << 23))
+			else if (cpu_has_aliasing_icache(CPU_ARCH_ARMv7))
+				cacheid |= CACHEID_VIPT_I_ALIASING;
+		} else if (cachetype & (1 << 23)) {
 			cacheid = CACHEID_VIPT_ALIASING;
-		else
+		} else {
 			cacheid = CACHEID_VIPT_NONALIASING;
+			if (cpu_has_aliasing_icache(CPU_ARCH_ARMv6))
+				cacheid |= CACHEID_VIPT_I_ALIASING;
+		}
 	} else {
 		cacheid = CACHEID_VIVT;
 	}
@@ -263,7 +298,7 @@ static void __init cacheid_init(void)
 		cache_is_vipt_nonaliasing() ? "VIPT nonaliasing" : "unknown",
 		cache_is_vivt() ? "VIVT" :
 		icache_is_vivt_asid_tagged() ? "VIVT ASID tagged" :
-		cache_is_vipt_aliasing() ? "VIPT aliasing" :
+		icache_is_vipt_aliasing() ? "VIPT aliasing" :
 		cache_is_vipt_nonaliasing() ? "VIPT nonaliasing" : "unknown");
 }
 
@@ -490,7 +525,7 @@ request_standard_resources(struct meminfo *mi, struct machine_desc *mdesc)
 
 	kernel_code.start   = virt_to_phys(_text);
 	kernel_code.end     = virt_to_phys(_etext - 1);
-	kernel_data.start   = virt_to_phys(_data);
+	kernel_data.start   = virt_to_phys(_sdata);
 	kernel_data.end     = virt_to_phys(_end - 1);
 
 	for (i = 0; i < mi->nr_banks; i++) {
@@ -825,7 +860,8 @@ void __init setup_arch(char **cmdline_p)
 	request_standard_resources(&meminfo, mdesc);
 
 #ifdef CONFIG_SMP
-	smp_init_cpus();
+	if (is_smp())
+		smp_init_cpus();
 #endif
 	reserve_crashkernel();
 
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 40dc74f2b27..8c195959025 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -33,6 +33,7 @@
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
 #include <asm/processor.h>
+#include <asm/sections.h>
 #include <asm/tlbflush.h>
 #include <asm/ptrace.h>
 #include <asm/localtimer.h>
@@ -67,12 +68,47 @@ enum ipi_msg_type {
 	IPI_CPU_STOP,
 };
 
+static inline void identity_mapping_add(pgd_t *pgd, unsigned long start,
+	unsigned long end)
+{
+	unsigned long addr, prot;
+	pmd_t *pmd;
+
+	prot = PMD_TYPE_SECT | PMD_SECT_AP_WRITE;
+	if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale())
+		prot |= PMD_BIT4;
+
+	for (addr = start & PGDIR_MASK; addr < end;) {
+		pmd = pmd_offset(pgd + pgd_index(addr), addr);
+		pmd[0] = __pmd(addr | prot);
+		addr += SECTION_SIZE;
+		pmd[1] = __pmd(addr | prot);
+		addr += SECTION_SIZE;
+		flush_pmd_entry(pmd);
+		outer_clean_range(__pa(pmd), __pa(pmd + 1));
+	}
+}
+
+static inline void identity_mapping_del(pgd_t *pgd, unsigned long start,
+	unsigned long end)
+{
+	unsigned long addr;
+	pmd_t *pmd;
+
+	for (addr = start & PGDIR_MASK; addr < end; addr += PGDIR_SIZE) {
+		pmd = pmd_offset(pgd + pgd_index(addr), addr);
+		pmd[0] = __pmd(0);
+		pmd[1] = __pmd(0);
+		clean_pmd_entry(pmd);
+		outer_clean_range(__pa(pmd), __pa(pmd + 1));
+	}
+}
+
 int __cpuinit __cpu_up(unsigned int cpu)
 {
 	struct cpuinfo_arm *ci = &per_cpu(cpu_data, cpu);
 	struct task_struct *idle = ci->idle;
 	pgd_t *pgd;
-	pmd_t *pmd;
 	int ret;
 
 	/*
@@ -101,11 +137,16 @@ int __cpuinit __cpu_up(unsigned int cpu)
 	 * a 1:1 mapping for the physical address of the kernel.
 	 */
 	pgd = pgd_alloc(&init_mm);
-	pmd = pmd_offset(pgd + pgd_index(PHYS_OFFSET), PHYS_OFFSET);
-	*pmd = __pmd((PHYS_OFFSET & PGDIR_MASK) |
-		     PMD_TYPE_SECT | PMD_SECT_AP_WRITE);
-	flush_pmd_entry(pmd);
-	outer_clean_range(__pa(pmd), __pa(pmd + 1));
+	if (!pgd)
+		return -ENOMEM;
+
+	if (PHYS_OFFSET != PAGE_OFFSET) {
+#ifndef CONFIG_HOTPLUG_CPU
+		identity_mapping_add(pgd, __pa(__init_begin), __pa(__init_end));
+#endif
+		identity_mapping_add(pgd, __pa(_stext), __pa(_etext));
+		identity_mapping_add(pgd, __pa(_sdata), __pa(_edata));
+	}
 
 	/*
 	 * We need to tell the secondary core where to find
@@ -143,8 +184,14 @@ int __cpuinit __cpu_up(unsigned int cpu)
 	secondary_data.stack = NULL;
 	secondary_data.pgdir = 0;
 
-	*pmd = __pmd(0);
-	clean_pmd_entry(pmd);
+	if (PHYS_OFFSET != PAGE_OFFSET) {
+#ifndef CONFIG_HOTPLUG_CPU
+		identity_mapping_del(pgd, __pa(__init_begin), __pa(__init_end));
+#endif
+		identity_mapping_del(pgd, __pa(_stext), __pa(_etext));
+		identity_mapping_del(pgd, __pa(_sdata), __pa(_edata));
+	}
+
 	pgd_free(&init_mm, pgd);
 
 	if (ret) {
@@ -567,7 +614,8 @@ void smp_send_stop(void)
 {
 	cpumask_t mask = cpu_online_map;
 	cpu_clear(smp_processor_id(), mask);
-	send_ipi_message(&mask, IPI_CPU_STOP);
+	if (!cpus_empty(mask))
+		send_ipi_message(&mask, IPI_CPU_STOP);
 }
 
 /*
diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c
index dd81a918c10..2a161765f6d 100644
--- a/arch/arm/kernel/unwind.c
+++ b/arch/arm/kernel/unwind.c
@@ -146,6 +146,8 @@ static struct unwind_idx *unwind_find_idx(unsigned long addr)
 			    addr < table->end_addr) {
 				idx = search_index(addr, table->start,
 						   table->stop - 1);
+				/* Move-to-front to exploit common traces */
+				list_move(&table->list, &unwind_tables);
 				break;
 			}
 		}
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index b16c07914b5..1953e3d21ab 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -8,6 +8,19 @@
 #include <asm/memory.h>
 #include <asm/page.h>
 	
+#define PROC_INFO							\
+	VMLINUX_SYMBOL(__proc_info_begin) = .;				\
+	*(.proc.info.init)						\
+	VMLINUX_SYMBOL(__proc_info_end) = .;
+
+#ifdef CONFIG_HOTPLUG_CPU
+#define ARM_CPU_DISCARD(x)
+#define ARM_CPU_KEEP(x)		x
+#else
+#define ARM_CPU_DISCARD(x)	x
+#define ARM_CPU_KEEP(x)
+#endif
+
 OUTPUT_ARCH(arm)
 ENTRY(stext)
 
@@ -31,15 +44,18 @@ SECTIONS
 			HEAD_TEXT
 			INIT_TEXT
 		_einittext = .;
-		__proc_info_begin = .;
-			*(.proc.info.init)
-		__proc_info_end = .;
+		ARM_CPU_DISCARD(PROC_INFO)
 		__arch_info_begin = .;
 			*(.arch.info.init)
 		__arch_info_end = .;
 		__tagtable_begin = .;
 			*(.taglist.init)
 		__tagtable_end = .;
+#ifdef CONFIG_SMP_ON_UP
+		__smpalt_begin = .;
+			*(.alt.smp.init)
+		__smpalt_end = .;
+#endif
 
 		INIT_SETUP(16)
 
@@ -68,10 +84,8 @@ SECTIONS
 	/DISCARD/ : {
 		*(.ARM.exidx.exit.text)
 		*(.ARM.extab.exit.text)
-#ifndef CONFIG_HOTPLUG_CPU
-		*(.ARM.exidx.cpuexit.text)
-		*(.ARM.extab.cpuexit.text)
-#endif
+		ARM_CPU_DISCARD(*(.ARM.exidx.cpuexit.text))
+		ARM_CPU_DISCARD(*(.ARM.extab.cpuexit.text))
 #ifndef CONFIG_HOTPLUG
 		*(.ARM.exidx.devexit.text)
 		*(.ARM.extab.devexit.text)
@@ -100,12 +114,11 @@ SECTIONS
 			*(.glue_7)
 			*(.glue_7t)
 		*(.got)			/* Global offset table		*/
+			ARM_CPU_KEEP(PROC_INFO)
 	}
 
 	RO_DATA(PAGE_SIZE)
 
-	_etext = .;			/* End of text and rodata section */
-
 #ifdef CONFIG_ARM_UNWIND
 	/*
 	 * Stack unwinding tables
@@ -123,6 +136,8 @@ SECTIONS
 	}
 #endif
 
+	_etext = .;			/* End of text and rodata section */
+
 #ifdef CONFIG_XIP_KERNEL
 	__data_loc = ALIGN(4);		/* location in binary */
 	. = PAGE_OFFSET + TEXT_OFFSET;
@@ -237,6 +252,12 @@ SECTIONS
 
 	/* Default discards */
 	DISCARDS
+
+#ifndef CONFIG_SMP_ON_UP
+	/DISCARD/ : {
+		*(.alt.smp.init)
+	}
+#endif
 }
 
 /*
diff --git a/arch/arm/mach-aaec2000/aaed2000.c b/arch/arm/mach-aaec2000/aaed2000.c
index 81a3ecc0d10..0eb3e3e5b2d 100644
--- a/arch/arm/mach-aaec2000/aaed2000.c
+++ b/arch/arm/mach-aaec2000/aaed2000.c
@@ -95,8 +95,6 @@ static void __init aaed2000_map_io(void)
 
 MACHINE_START(AAED2000, "Agilent AAED-2000 Development Platform")
 	/* Maintainer: Nicolas Bellido Y Ortega */
-	.phys_io	= PIO_BASE,
-	.io_pg_offst	= ((VIO_BASE) >> 18) & 0xfffc,
 	.map_io		= aaed2000_map_io,
 	.init_irq	= aaed2000_init_irq,
 	.timer		= &aaec2000_timer,
diff --git a/arch/arm/mach-aaec2000/include/mach/debug-macro.S b/arch/arm/mach-aaec2000/include/mach/debug-macro.S
index a9cac368bfe..bc7ad5561c4 100644
--- a/arch/arm/mach-aaec2000/include/mach/debug-macro.S
+++ b/arch/arm/mach-aaec2000/include/mach/debug-macro.S
@@ -10,12 +10,10 @@
  */
 
 #include "hardware.h"
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x80000000		@ physical
-		movne	\rx, #io_p2v(0x80000000)	@ virtual
-		orr	\rx, \rx, #0x00000800
+		.macro	addruart, rp, rv
+		mov	\rp, 0x00000800
+		orr	\rv, \rp, #io_p2v(0x80000000)	@ virtual
+		orr	\rp, \rp, #0x80000000		@ physical
 		.endm
 
 		.macro	senduart,rd,rx
diff --git a/arch/arm/mach-aaec2000/include/mach/vmalloc.h b/arch/arm/mach-aaec2000/include/mach/vmalloc.h
index 551f68f666b..cff4e0a996c 100644
--- a/arch/arm/mach-aaec2000/include/mach/vmalloc.h
+++ b/arch/arm/mach-aaec2000/include/mach/vmalloc.h
@@ -11,6 +11,6 @@
 #ifndef __ASM_ARCH_VMALLOC_H
 #define __ASM_ARCH_VMALLOC_H
 
-#define VMALLOC_END		(PAGE_OFFSET + 0x10000000)
+#define VMALLOC_END		0xd0000000
 
 #endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 939bccd7056..851e8139ef9 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -33,6 +33,7 @@ config ARCH_AT91SAM9260
 	select HAVE_AT91_USART3
 	select HAVE_AT91_USART4
 	select HAVE_AT91_USART5
+	select HAVE_NET_MACB
 
 config ARCH_AT91SAM9261
 	bool "AT91SAM9261"
@@ -51,6 +52,7 @@ config ARCH_AT91SAM9263
 	select CPU_ARM926T
 	select GENERIC_CLOCKEVENTS
 	select HAVE_FB_ATMEL
+	select HAVE_NET_MACB
 
 config ARCH_AT91SAM9RL
 	bool "AT91SAM9RL"
@@ -66,6 +68,7 @@ config ARCH_AT91SAM9G20
 	select HAVE_AT91_USART3
 	select HAVE_AT91_USART4
 	select HAVE_AT91_USART5
+	select HAVE_NET_MACB
 
 config ARCH_AT91SAM9G45
 	bool "AT91SAM9G45"
@@ -73,6 +76,7 @@ config ARCH_AT91SAM9G45
 	select GENERIC_CLOCKEVENTS
 	select HAVE_AT91_USART3
 	select HAVE_FB_ATMEL
+	select HAVE_NET_MACB
 
 config ARCH_AT91CAP9
 	bool "AT91CAP9"
@@ -248,6 +252,12 @@ config MACH_CPU9260
 	  Select this if you are using a Eukrea Electromatique's
 	  CPU9260 Board <http://www.eukrea.com/>
 
+config MACH_FLEXIBITY
+	bool "Flexibity Connect board"
+	help
+	  Select this if you are using Flexibity Connect board
+	  <http://www.flexibity.com>
+
 endif
 
 # ----------------------------------------------------------
@@ -338,6 +348,7 @@ config MACH_AT91SAM9G20EK
 	  that embeds only one SD/MMC slot.
 
 config MACH_AT91SAM9G20EK_2MMC
+	depends on MACH_AT91SAM9G20EK
 	bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
 	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
@@ -383,8 +394,8 @@ if ARCH_AT91SAM9G45
 
 comment "AT91SAM9G45 Board Type"
 
-config MACH_AT91SAM9G45EKES
-	bool "Atmel AT91SAM9G45-EKES Evaluation Kit"
+config MACH_AT91SAM9M10G45EK
+	bool "Atmel AT91SAM9M10G45-EK Evaluation Kits"
 	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit.
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index ca2ac003f41..412b3a471a4 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -46,6 +46,7 @@ obj-$(CONFIG_MACH_USB_A9260)	+= board-usb-a9260.o
 obj-$(CONFIG_MACH_QIL_A9260)	+= board-qil-a9260.o
 obj-$(CONFIG_MACH_AFEB9260)	+= board-afeb-9260v1.o
 obj-$(CONFIG_MACH_CPU9260)	+= board-cpu9krea.o
+obj-$(CONFIG_MACH_FLEXIBITY)	+= board-flexibity.o
 
 # AT91SAM9261 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
@@ -61,7 +62,6 @@ obj-$(CONFIG_MACH_AT91SAM9RLEK)	+= board-sam9rlek.o
 
 # AT91SAM9G20 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o
-obj-$(CONFIG_MACH_AT91SAM9G20EK_2MMC) += board-sam9g20ek-2slot-mmc.o
 obj-$(CONFIG_MACH_CPU9G20)	+= board-cpu9krea.o
 obj-$(CONFIG_MACH_STAMP9G20)	+= board-stamp9g20.o
 obj-$(CONFIG_MACH_PORTUXG20)	+= board-stamp9g20.o
@@ -70,7 +70,7 @@ obj-$(CONFIG_MACH_PORTUXG20)	+= board-stamp9g20.o
 obj-$(CONFIG_MACH_SNAPPER_9260)	+= board-snapper9260.o
 
 # AT91SAM9G45 board-specific support
-obj-$(CONFIG_MACH_AT91SAM9G45EKES) += board-sam9m10g45ek.o
+obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o
 
 # AT91CAP9 board-specific support
 obj-$(CONFIG_MACH_AT91CAP9ADK)	+= board-cap9adk.o
diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c
index 9b27d167bff..46bdc82d3fb 100644
--- a/arch/arm/mach-at91/board-1arm.c
+++ b/arch/arm/mach-at91/board-1arm.c
@@ -92,8 +92,6 @@ static void __init onearm_board_init(void)
 
 MACHINE_START(ONEARM, "Ajeco 1ARM single board computer")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
 	.map_io		= onearm_map_io,
diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index 50667bed7cc..cba7f7771fe 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -218,8 +218,6 @@ static void __init afeb9260_board_init(void)
 
 MACHINE_START(AFEB9260, "Custom afeb9260 board")
 	/* Maintainer: Sergey Lapin <slapin@ossfans.org> */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
 	.map_io		= afeb9260_map_io,
diff --git a/arch/arm/mach-at91/board-at572d940hf_ek.c b/arch/arm/mach-at91/board-at572d940hf_ek.c
index 5daff277f53..3929f1c9e4e 100644
--- a/arch/arm/mach-at91/board-at572d940hf_ek.c
+++ b/arch/arm/mach-at91/board-at572d940hf_ek.c
@@ -216,7 +216,7 @@ static struct atmel_nand_data __initdata eb_nand_data = {
 /*	.rdy_pin	= AT91_PIN_PC16, */
 	.enable_pin	= AT91_PIN_PA15,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
 	.bus_width_16	= 1,
 #else
 	.bus_width_16	= 0,
@@ -318,8 +318,6 @@ static void __init eb_board_init(void)
 
 MACHINE_START(AT572D940HFEB, "Atmel AT91D940HF-EB")
 	/* Maintainer: Atmel <costa.antonior@gmail.com> */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
 	.map_io		= eb_map_io,
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
index 44eb9f76493..b54e3e6fceb 100644
--- a/arch/arm/mach-at91/board-cam60.c
+++ b/arch/arm/mach-at91/board-cam60.c
@@ -198,8 +198,6 @@ static void __init cam60_board_init(void)
 
 MACHINE_START(CAM60, "KwikByte CAM60")
 	/* Maintainer: KwikByte */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
 	.map_io		= cam60_map_io,
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
index d6940870e40..e7274440ead 100644
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -399,8 +399,6 @@ static void __init cap9adk_board_init(void)
 
 MACHINE_START(AT91CAP9ADK, "Atmel AT91CAP9A-DK")
 	/* Maintainer: Stelian Pop <stelian.pop@leadtechdesign.com> */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
 	.map_io		= cap9adk_map_io,
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index db1f9544d2e..2e74a19874d 100644
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -162,8 +162,6 @@ static void __init carmeva_board_init(void)
 
 MACHINE_START(CARMEVA, "Carmeva")
 	/* Maintainer: Conitec Datasystems */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
 	.map_io		= carmeva_map_io,
diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c
index 4bc2e9f6ebb..3838594578f 100644
--- a/arch/arm/mach-at91/board-cpu9krea.c
+++ b/arch/arm/mach-at91/board-cpu9krea.c
@@ -375,8 +375,6 @@ MACHINE_START(CPUAT9260, "Eukrea CPU9260")
 MACHINE_START(CPUAT9G20, "Eukrea CPU9G20")
 #endif
 	/* Maintainer: Eric Benard - EUKREA Electromatique */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
 	.map_io		= cpu9krea_map_io,
diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c
index a28d9965619..2f4dd8cdd48 100644
--- a/arch/arm/mach-at91/board-cpuat91.c
+++ b/arch/arm/mach-at91/board-cpuat91.c
@@ -175,8 +175,6 @@ static void __init cpuat91_board_init(void)
 
 MACHINE_START(CPUAT91, "Eukrea")
 	/* Maintainer: Eric Benard - EUKREA Electromatique */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
 	.map_io		= cpuat91_map_io,
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index fea2529ebcf..464839dc39b 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -257,8 +257,6 @@ static void __init csb337_board_init(void)
 
 MACHINE_START(CSB337, "Cogent CSB337")
 	/* Maintainer: Bill Gatliff */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
 	.map_io		= csb337_map_io,
diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
index cfa3f04b220..431688c6141 100644
--- a/arch/arm/mach-at91/board-csb637.c
+++ b/arch/arm/mach-at91/board-csb637.c
@@ -138,8 +138,6 @@ static void __init csb637_board_init(void)
 
 MACHINE_START(CSB637, "Cogent CSB637")
 	/* Maintainer: Bill Gatliff */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
 	.map_io		= csb637_map_io,
diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-dk.c
index 0fd0f5bc77e..e14f0e16568 100644
--- a/arch/arm/mach-at91/board-dk.c
+++ b/arch/arm/mach-at91/board-dk.c
@@ -225,8 +225,6 @@ static void __init dk_board_init(void)
 
 MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK")
 	/* Maintainer: SAN People/Atmel */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
 	.map_io		= dk_map_io,
diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
index 528656761ff..6cf6566ae34 100644
--- a/arch/arm/mach-at91/board-eb9200.c
+++ b/arch/arm/mach-at91/board-eb9200.c
@@ -120,8 +120,6 @@ static void __init eb9200_board_init(void)
 }
 
 MACHINE_START(ATEB9200, "Embest ATEB9200")
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
 	.map_io		= eb9200_map_io,
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
index 1d69908617f..7b58c948a95 100644
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -168,8 +168,6 @@ static void __init ecb_at91board_init(void)
 
 MACHINE_START(ECBAT91, "emQbit's ECB_AT91")
 	/* Maintainer: emQbit.com */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
 	.map_io		= ecb_at91map_io,
diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c
index 295a96609e7..a158a0ce458 100644
--- a/arch/arm/mach-at91/board-eco920.c
+++ b/arch/arm/mach-at91/board-eco920.c
@@ -148,8 +148,6 @@ static void __init eco920_board_init(void)
 
 MACHINE_START(ECO920, "eco920")
 	/* Maintainer: Sascha Hauer */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
 	.map_io		= eco920_map_io,
diff --git a/arch/arm/mach-at91/board-ek.c b/arch/arm/mach-at91/board-ek.c
index 4cdfaac8e59..56e92c4bbc2 100644
--- a/arch/arm/mach-at91/board-ek.c
+++ b/arch/arm/mach-at91/board-ek.c
@@ -191,8 +191,6 @@ static void __init ek_board_init(void)
 
 MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK")
 	/* Maintainer: SAN People/Atmel */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
 	.map_io		= ek_map_io,
diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c
new file mode 100644
index 00000000000..c8a62dc8fa6
--- /dev/null
+++ b/arch/arm/mach-at91/board-flexibity.c
@@ -0,0 +1,162 @@
+/*
+ * linux/arch/arm/mach-at91/board-flexibity.c
+ *
+ *  Copyright (C) 2010 Flexibity
+ *  Copyright (C) 2005 SAN People
+ *  Copyright (C) 2006 Atmel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/board.h>
+
+#include "generic.h"
+
+static void __init flexibity_map_io(void)
+{
+	/* Initialize processor: 18.432 MHz crystal */
+	at91sam9260_initialize(18432000);
+
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
+}
+
+static void __init flexibity_init_irq(void)
+{
+	at91sam9260_init_interrupts(NULL);
+}
+
+/* USB Host port */
+static struct at91_usbh_data __initdata flexibity_usbh_data = {
+	.ports		= 2,
+};
+
+/* USB Device port */
+static struct at91_udc_data __initdata flexibity_udc_data = {
+	.vbus_pin	= AT91_PIN_PC5,
+	.pullup_pin	= 0,		/* pull-up driven by UDC */
+};
+
+/* SPI devices */
+static struct spi_board_info flexibity_spi_devices[] = {
+	{	/* DataFlash chip */
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 1,
+		.max_speed_hz	= 15 * 1000 * 1000,
+		.bus_num	= 0,
+	},
+};
+
+/* MCI (SD/MMC) */
+static struct at91_mmc_data __initdata flexibity_mmc_data = {
+	.slot_b		= 0,
+	.wire4		= 1,
+	.det_pin	= AT91_PIN_PC9,
+	.wp_pin		= AT91_PIN_PC4,
+};
+
+/* LEDs */
+static struct gpio_led flexibity_leds[] = {
+	{
+		.name			= "usb1:green",
+		.gpio			= AT91_PIN_PA12,
+		.active_low		= 1,
+		.default_trigger	= "default-on",
+	},
+	{
+		.name			= "usb1:red",
+		.gpio			= AT91_PIN_PA13,
+		.active_low		= 1,
+		.default_trigger	= "default-on",
+	},
+	{
+		.name			= "usb2:green",
+		.gpio			= AT91_PIN_PB26,
+		.active_low		= 1,
+		.default_trigger	= "default-on",
+	},
+	{
+		.name			= "usb2:red",
+		.gpio			= AT91_PIN_PB27,
+		.active_low		= 1,
+		.default_trigger	= "default-on",
+	},
+	{
+		.name			= "usb3:green",
+		.gpio			= AT91_PIN_PC8,
+		.active_low		= 1,
+		.default_trigger	= "default-on",
+	},
+	{
+		.name			= "usb3:red",
+		.gpio			= AT91_PIN_PC6,
+		.active_low		= 1,
+		.default_trigger	= "default-on",
+	},
+	{
+		.name			= "usb4:green",
+		.gpio			= AT91_PIN_PB4,
+		.active_low		= 1,
+		.default_trigger	= "default-on",
+	},
+	{
+		.name			= "usb4:red",
+		.gpio			= AT91_PIN_PB5,
+		.active_low		= 1,
+		.default_trigger	= "default-on",
+	}
+};
+
+static void __init flexibity_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	/* USB Host */
+	at91_add_device_usbh(&flexibity_usbh_data);
+	/* USB Device */
+	at91_add_device_udc(&flexibity_udc_data);
+	/* SPI */
+	at91_add_device_spi(flexibity_spi_devices,
+		ARRAY_SIZE(flexibity_spi_devices));
+	/* MMC */
+	at91_add_device_mmc(0, &flexibity_mmc_data);
+	/* LEDs */
+	at91_gpio_leds(flexibity_leds, ARRAY_SIZE(flexibity_leds));
+}
+
+MACHINE_START(FLEXIBITY, "Flexibity Connect")
+	/* Maintainer: Maxim Osipov */
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91sam926x_timer,
+	.map_io		= flexibity_map_io,
+	.init_irq	= flexibity_init_irq,
+	.init_machine	= flexibity_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
index a87956c0a74..c0ce79d431a 100644
--- a/arch/arm/mach-at91/board-kafa.c
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -99,8 +99,6 @@ static void __init kafa_board_init(void)
 
 MACHINE_START(KAFA, "Sperry-Sun KAFA")
 	/* Maintainer: Sergei Sharonov */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
 	.map_io		= kafa_map_io,
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index fe9b9913fa3..a13d2063faf 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -136,8 +136,6 @@ static void __init kb9202_board_init(void)
 
 MACHINE_START(KB9200, "KB920x")
 	/* Maintainer: KwikByte, Inc. */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
 	.map_io		= kb9202_map_io,
diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c
index 7c1e382330f..fe5f1d47e6e 100644
--- a/arch/arm/mach-at91/board-neocore926.c
+++ b/arch/arm/mach-at91/board-neocore926.c
@@ -387,8 +387,6 @@ static void __init neocore926_board_init(void)
 
 MACHINE_START(NEOCORE926, "ADENEO NEOCORE 926")
 	/* Maintainer: ADENEO */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
 	.map_io		= neocore926_map_io,
diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
index 859727e7ea3..9d833bbc592 100644
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@@ -156,8 +156,6 @@ static void __init picotux200_board_init(void)
 
 MACHINE_START(PICOTUX2XX, "picotux 200")
 	/* Maintainer: Kleinhenz Elektronik GmbH */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
 	.map_io		= picotux200_map_io,
diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
index 664938e8f66..69d15a875b6 100644
--- a/arch/arm/mach-at91/board-qil-a9260.c
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -268,8 +268,6 @@ static void __init ek_board_init(void)
 
 MACHINE_START(QIL_A9260, "CALAO QIL_A9260")
 	/* Maintainer: calao-systems */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
 	.map_io		= ek_map_io,
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index b4834697753..25a26beaa72 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -212,8 +212,6 @@ static void __init ek_board_init(void)
 
 MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260")
 	/* Maintainer: Olimex */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
 	.map_io		= ek_map_io,
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index ba9d501b5c5..de1816e0e1d 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -356,8 +356,6 @@ static void __init ek_board_init(void)
 
 MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
 	/* Maintainer: Atmel */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
 	.map_io		= ek_map_io,
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 65eb0943194..14acc901e24 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -623,8 +623,6 @@ MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
 MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK")
 #endif
 	/* Maintainer: Atmel */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
 	.map_io		= ek_map_io,
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 2d867fb0630..bfe490df58b 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -454,8 +454,6 @@ static void __init ek_board_init(void)
 
 MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
 	/* Maintainer: Atmel */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
 	.map_io		= ek_map_io,
diff --git a/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c b/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c
deleted file mode 100644
index c49f5c003ee..00000000000
--- a/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c
+++ /dev/null
@@ -1,329 +0,0 @@
-/*
- *  Copyright (C) 2005 SAN People
- *  Copyright (C) 2008 Atmel
- *  Copyright (C) 2009 Rob Emanuele
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/at73c213.h>
-#include <linux/clk.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/consumer.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/board.h>
-#include <mach/gpio.h>
-#include <mach/at91sam9_smc.h>
-
-#include "sam9_smc.h"
-#include "generic.h"
-
-
-static void __init ek_map_io(void)
-{
-	/* Initialize processor: 18.432 MHz crystal */
-	at91sam9260_initialize(18432000);
-
-	/* DGBU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-			   | ATMEL_UART_RI);
-
-	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
-	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
-}
-
-static void __init ek_init_irq(void)
-{
-	at91sam9260_init_interrupts(NULL);
-}
-
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata ek_usbh_data = {
-	.ports		= 2,
-};
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata ek_udc_data = {
-	.vbus_pin	= AT91_PIN_PC5,
-	.pullup_pin	= 0,		/* pull-up driven by UDC */
-};
-
-
-/*
- * SPI devices.
- */
-static struct spi_board_info ek_spi_devices[] = {
-#if !(defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_AT91))
-	{	/* DataFlash chip */
-		.modalias	= "mtd_dataflash",
-		.chip_select	= 1,
-		.max_speed_hz	= 15 * 1000 * 1000,
-		.bus_num	= 0,
-	},
-#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
-	{	/* DataFlash card */
-		.modalias	= "mtd_dataflash",
-		.chip_select	= 0,
-		.max_speed_hz	= 15 * 1000 * 1000,
-		.bus_num	= 0,
-	},
-#endif
-#endif
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct at91_eth_data __initdata ek_macb_data = {
-	.phy_irq_pin	= AT91_PIN_PB0,
-	.is_rmii	= 1,
-};
-
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata ek_nand_partition[] = {
-	{
-		.name   = "Bootstrap",
-		.offset = 0,
-		.size   = 4 * SZ_1M,
-	},
-	{
-		.name	= "Partition 1",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= 60 * SZ_1M,
-	},
-	{
-		.name	= "Partition 2",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
-	*num_partitions = ARRAY_SIZE(ek_nand_partition);
-	return ek_nand_partition;
-}
-
-/* det_pin is not connected */
-static struct atmel_nand_data __initdata ek_nand_data = {
-	.ale		= 21,
-	.cle		= 22,
-	.rdy_pin	= AT91_PIN_PC13,
-	.enable_pin	= AT91_PIN_PC14,
-	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
-	.bus_width_16	= 1,
-#else
-	.bus_width_16	= 0,
-#endif
-};
-
-static struct sam9_smc_config __initdata ek_nand_smc_config = {
-	.ncs_read_setup		= 0,
-	.nrd_setup		= 2,
-	.ncs_write_setup	= 0,
-	.nwe_setup		= 2,
-
-	.ncs_read_pulse		= 4,
-	.nrd_pulse		= 4,
-	.ncs_write_pulse	= 4,
-	.nwe_pulse		= 4,
-
-	.read_cycle		= 7,
-	.write_cycle		= 7,
-
-	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
-	.tdf_cycles		= 3,
-};
-
-static void __init ek_add_device_nand(void)
-{
-	/* setup bus-width (8 or 16) */
-	if (ek_nand_data.bus_width_16)
-		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
-	else
-		ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
-
-	/* configure chip-select 3 (NAND) */
-	sam9_smc_configure(3, &ek_nand_smc_config);
-
-	at91_add_device_nand(&ek_nand_data);
-}
-
-
-/*
- * MCI (SD/MMC)
- * wp_pin is not connected
- */
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
-static struct mci_platform_data __initdata ek_mmc_data = {
-	.slot[0] = {
-		.bus_width	= 4,
-		.detect_pin	= AT91_PIN_PC2,
-		.wp_pin		= -ENODEV,
-	},
-	.slot[1] = {
-		.bus_width	= 4,
-		.detect_pin	= AT91_PIN_PC9,
-		.wp_pin		= -ENODEV,
-	},
-
-};
-#else
-static struct at91_mmc_data __initdata ek_mmc_data = {
-	.slot_b		= 1,	/* Only one slot so use slot B */
-	.wire4		= 1,
-	.det_pin	= AT91_PIN_PC9,
-};
-#endif
-
-/*
- * LEDs
- */
-static struct gpio_led ek_leds[] = {
-	{	/* "bottom" led, green, userled1 to be defined */
-		.name			= "ds5",
-		.gpio			= AT91_PIN_PB8,
-		.active_low		= 1,
-		.default_trigger	= "none",
-	},
-	{	/* "power" led, yellow */
-		.name			= "ds1",
-		.gpio			= AT91_PIN_PB9,
-		.default_trigger	= "heartbeat",
-	}
-};
-
-#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
-static struct regulator_consumer_supply ek_audio_consumer_supplies[] = {
-	REGULATOR_SUPPLY("AVDD", "0-001b"),
-	REGULATOR_SUPPLY("HPVDD", "0-001b"),
-	REGULATOR_SUPPLY("DBVDD", "0-001b"),
-	REGULATOR_SUPPLY("DCVDD", "0-001b"),
-};
-
-static struct regulator_init_data ek_avdd_reg_init_data = {
-	.constraints	= {
-		.name	= "3V3",
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-	},
-	.consumer_supplies = ek_audio_consumer_supplies,
-	.num_consumer_supplies = ARRAY_SIZE(ek_audio_consumer_supplies),
-};
-
-static struct fixed_voltage_config ek_vdd_pdata = {
-	.supply_name	= "board-3V3",
-	.microvolts	= 3300000,
-	.gpio		= -EINVAL,
-	.enabled_at_boot = 0,
-	.init_data	= &ek_avdd_reg_init_data,
-};
-static struct platform_device ek_voltage_regulator = {
-	.name		= "reg-fixed-voltage",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &ek_vdd_pdata,
-	},
-};
-static void __init ek_add_regulators(void)
-{
-	platform_device_register(&ek_voltage_regulator);
-}
-#else
-static void __init ek_add_regulators(void) {}
-#endif
-
-static struct i2c_board_info __initdata ek_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("24c512", 0x50),
-	},
-};
-
-
-static void __init ek_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* USB Host */
-	at91_add_device_usbh(&ek_usbh_data);
-	/* USB Device */
-	at91_add_device_udc(&ek_udc_data);
-	/* SPI */
-	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
-	/* NAND */
-	ek_add_device_nand();
-	/* Ethernet */
-	at91_add_device_eth(&ek_macb_data);
-	/* Regulators */
-	ek_add_regulators();
-	/* MMC */
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
-	at91_add_device_mci(0, &ek_mmc_data);
-#else
-	at91_add_device_mmc(0, &ek_mmc_data);
-#endif
-	/* I2C */
-	at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
-	/* LEDs */
-	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
-	/* PCK0 provides MCLK to the WM8731 */
-	at91_set_B_periph(AT91_PIN_PC1, 0);
-	/* SSC (for WM8731) */
-	at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
-}
-
-MACHINE_START(AT91SAM9G20EK_2MMC, "Atmel AT91SAM9G20-EK 2 MMC Slot Mod")
-	/* Maintainer: Rob Emanuele */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
-	.timer		= &at91sam926x_timer,
-	.map_io		= ek_map_io,
-	.init_irq	= ek_init_irq,
-	.init_machine	= ek_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 6ea9808b886..ca8198b3c16 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -47,6 +47,18 @@
 #include "sam9_smc.h"
 #include "generic.h"
 
+/*
+ * board revision encoding
+ * bit 0:
+ * 	0 => 1 sd/mmc slot
+ * 	1 => 2 sd/mmc slots connectors (board from revision C)
+ */
+#define HAVE_2MMC	(1 << 0)
+static int inline ek_have_2mmc(void)
+{
+	return machine_is_at91sam9g20ek_2mmc() || (system_rev & HAVE_2MMC);
+}
+
 
 static void __init ek_map_io(void)
 {
@@ -94,7 +106,7 @@ static struct at91_udc_data __initdata ek_udc_data = {
  * SPI devices.
  */
 static struct spi_board_info ek_spi_devices[] = {
-#if !defined(CONFIG_MMC_AT91)
+#if !(defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_AT91))
 	{	/* DataFlash chip */
 		.modalias	= "mtd_dataflash",
 		.chip_select	= 1,
@@ -121,6 +133,13 @@ static struct at91_eth_data __initdata ek_macb_data = {
 	.is_rmii	= 1,
 };
 
+static void __init ek_add_device_macb(void)
+{
+	if (ek_have_2mmc())
+		ek_macb_data.phy_irq_pin = AT91_PIN_PB0;
+
+	at91_add_device_eth(&ek_macb_data);
+}
 
 /*
  * NAND flash
@@ -198,13 +217,36 @@ static void __init ek_add_device_nand(void)
 
 /*
  * MCI (SD/MMC)
- * det_pin, wp_pin and vcc_pin are not connected
+ * wp_pin and vcc_pin are not connected
  */
+#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
+static struct mci_platform_data __initdata ek_mmc_data = {
+	.slot[1] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PC9,
+	},
+
+};
+#else
 static struct at91_mmc_data __initdata ek_mmc_data = {
-	.slot_b		= 1,
+	.slot_b		= 1,	/* Only one slot so use slot B */
 	.wire4		= 1,
+	.det_pin	= AT91_PIN_PC9,
 };
+#endif
 
+static void __init ek_add_device_mmc(void)
+{
+#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
+	if (ek_have_2mmc()) {
+		ek_mmc_data.slot[0].bus_width = 4;
+		ek_mmc_data.slot[0].detect_pin = AT91_PIN_PC2;
+	}
+	at91_add_device_mci(0, &ek_mmc_data);
+#else
+	at91_add_device_mmc(0, &ek_mmc_data);
+#endif
+}
 
 /*
  * LEDs
@@ -223,6 +265,15 @@ static struct gpio_led ek_leds[] = {
 	}
 };
 
+static void __init ek_add_device_gpio_leds(void)
+{
+	if (ek_have_2mmc()) {
+		ek_leds[0].gpio = AT91_PIN_PB8;
+		ek_leds[1].gpio = AT91_PIN_PB9;
+	}
+
+	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+}
 
 /*
  * GPIO Buttons
@@ -336,15 +387,15 @@ static void __init ek_board_init(void)
 	/* NAND */
 	ek_add_device_nand();
 	/* Ethernet */
-	at91_add_device_eth(&ek_macb_data);
+	ek_add_device_macb();
 	/* Regulators */
 	ek_add_regulators();
 	/* MMC */
-	at91_add_device_mmc(0, &ek_mmc_data);
+	ek_add_device_mmc();
 	/* I2C */
 	at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
 	/* LEDs */
-	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+	ek_add_device_gpio_leds();
 	/* Push Buttons */
 	ek_add_device_buttons();
 	/* PCK0 provides MCLK to the WM8731 */
@@ -355,8 +406,15 @@ static void __init ek_board_init(void)
 
 MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK")
 	/* Maintainer: Atmel */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91sam926x_timer,
+	.map_io		= ek_map_io,
+	.init_irq	= ek_init_irq,
+	.init_machine	= ek_board_init,
+MACHINE_END
+
+MACHINE_START(AT91SAM9G20EK_2MMC, "Atmel AT91SAM9G20-EK 2 MMC Slot Mod")
+	/* Maintainer: Atmel */
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
 	.map_io		= ek_map_io,
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index ee800595594..7913984f6de 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -135,7 +135,7 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 	.rdy_pin	= AT91_PIN_PC8,
 	.enable_pin	= AT91_PIN_PC14,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
 	.bus_width_16	= 1,
 #else
 	.bus_width_16	= 0,
@@ -399,10 +399,8 @@ static void __init ek_board_init(void)
 	at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
 }
 
-MACHINE_START(AT91SAM9G45EKES, "Atmel AT91SAM9G45-EKES")
+MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK")
 	/* Maintainer: Atmel */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
 	.map_io		= ek_map_io,
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index 7ac20f3a206..3bf3408e94c 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -329,8 +329,6 @@ static void __init ek_board_init(void)
 
 MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK")
 	/* Maintainer: Atmel */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
 	.map_io		= ek_map_io,
diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c
index 2c08ae4ad3a..0a99b3cedd7 100644
--- a/arch/arm/mach-at91/board-snapper9260.c
+++ b/arch/arm/mach-at91/board-snapper9260.c
@@ -177,8 +177,6 @@ static void __init snapper9260_board_init(void)
 }
 
 MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module")
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
 	.map_io		= snapper9260_map_io,
diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c
index 87958274290..5206eef4a67 100644
--- a/arch/arm/mach-at91/board-stamp9g20.c
+++ b/arch/arm/mach-at91/board-stamp9g20.c
@@ -294,8 +294,6 @@ static void __init stamp9g20_board_init(void)
 
 MACHINE_START(PORTUXG20, "taskit PortuxG20")
 	/* Maintainer: taskit GmbH */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
 	.map_io		= portuxg20_map_io,
@@ -305,8 +303,6 @@ MACHINE_END
 
 MACHINE_START(STAMP9G20, "taskit Stamp9G20")
 	/* Maintainer: taskit GmbH */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
 	.map_io		= stamp9g20_map_io,
diff --git a/arch/arm/mach-at91/board-usb-a9260.c b/arch/arm/mach-at91/board-usb-a9260.c
index 905d6ef7680..07784baeae8 100644
--- a/arch/arm/mach-at91/board-usb-a9260.c
+++ b/arch/arm/mach-at91/board-usb-a9260.c
@@ -228,8 +228,6 @@ static void __init ek_board_init(void)
 
 MACHINE_START(USB_A9260, "CALAO USB_A9260")
 	/* Maintainer: calao-systems */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
 	.map_io		= ek_map_io,
diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a9263.c
index b6a3480383e..b614508931f 100644
--- a/arch/arm/mach-at91/board-usb-a9263.c
+++ b/arch/arm/mach-at91/board-usb-a9263.c
@@ -244,8 +244,6 @@ static void __init ek_board_init(void)
 
 MACHINE_START(USB_A9263, "CALAO USB_A9263")
 	/* Maintainer: calao-systems */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
 	.map_io		= ek_map_io,
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index e22bf051f83..89df00a9d2f 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -594,8 +594,6 @@ static void __init yl9200_board_init(void)
 
 MACHINE_START(YL9200, "uCdragon YL-9200")
 	/* Maintainer: S.Birtles */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
 	.map_io		= yl9200_map_io,
diff --git a/arch/arm/mach-at91/include/mach/at91x40.h b/arch/arm/mach-at91/include/mach/at91x40.h
index d34cdb8abdc..063ac44a020 100644
--- a/arch/arm/mach-at91/include/mach/at91x40.h
+++ b/arch/arm/mach-at91/include/mach/at91x40.h
@@ -52,4 +52,10 @@
 #define AT91_DBGU_CIDR	(AT91_SF + 0)	/* CIDR in PS segment */
 #define AT91_DBGU_EXID	(AT91_SF + 4)	/* EXID in PS segment */
 
+/*
+ * Support defines for the simple Power Controller module.
+ */
+#define	AT91_PS_CR	(AT91_PS + 0)	/* PS Control register */
+#define	AT91_PS_CR_CPU	(1 << 0)	/* CPU clock disable bit */
+
 #endif /* AT91X40_H */
diff --git a/arch/arm/mach-at91/include/mach/debug-macro.S b/arch/arm/mach-at91/include/mach/debug-macro.S
index 9e750a1c1b5..0f959faf74a 100644
--- a/arch/arm/mach-at91/include/mach/debug-macro.S
+++ b/arch/arm/mach-at91/include/mach/debug-macro.S
@@ -14,11 +14,9 @@
 #include <mach/hardware.h>
 #include <mach/at91_dbgu.h>
 
-	.macro	addruart, rx, tmp
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1						@ MMU enabled?
-	ldreq	\rx, =(AT91_BASE_SYS + AT91_DBGU)		@ System peripherals (phys address)
-	ldrne	\rx, =(AT91_VA_BASE_SYS	+ AT91_DBGU)		@ System peripherals (virt address)
+	.macro	addruart, rp, rv
+	ldr	\rp, =(AT91_BASE_SYS + AT91_DBGU)		@ System peripherals (phys address)
+	ldr	\rv, =(AT91_VA_BASE_SYS	+ AT91_DBGU)		@ System peripherals (virt address)
 	.endm
 
 	.macro	senduart,rd,rx
diff --git a/arch/arm/mach-at91/include/mach/system.h b/arch/arm/mach-at91/include/mach/system.h
index ee8db152592..36af14bc13b 100644
--- a/arch/arm/mach-at91/include/mach/system.h
+++ b/arch/arm/mach-at91/include/mach/system.h
@@ -32,7 +32,11 @@ static inline void arch_idle(void)
 	 * Disable the processor clock.  The processor will be automatically
 	 * re-enabled by an interrupt or by a reset.
 	 */
+#ifdef AT91_PS
+	at91_sys_write(AT91_PS_CR, AT91_PS_CR_CPU);
+#else
 	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+#endif
 #ifndef CONFIG_CPU_ARM920T
 	/*
 	 * Set the processor (CP15) into 'Wait for Interrupt' mode.
diff --git a/arch/arm/mach-bcmring/arch.c b/arch/arm/mach-bcmring/arch.c
index 2f139196d63..73eb066d232 100644
--- a/arch/arm/mach-bcmring/arch.c
+++ b/arch/arm/mach-bcmring/arch.c
@@ -167,8 +167,6 @@ static void __init bcmring_fixup(struct machine_desc *desc,
 
 MACHINE_START(BCMRING, "BCMRING")
 	/* Maintainer: Broadcom Corporation */
-	.phys_io = MM_IO_START,
-	.io_pg_offst = (MM_IO_BASE >> 18) & 0xfffc,
 	.fixup = bcmring_fixup,
 	.map_io = bcmring_map_io,
 	.init_irq = bcmring_init_irq,
diff --git a/arch/arm/mach-bcmring/include/mach/vmalloc.h b/arch/arm/mach-bcmring/include/mach/vmalloc.h
index 35e2ead8395..3db3a09fd39 100644
--- a/arch/arm/mach-bcmring/include/mach/vmalloc.h
+++ b/arch/arm/mach-bcmring/include/mach/vmalloc.h
@@ -22,4 +22,4 @@
  * 0xe0000000 to 0xefffffff. This gives us 256 MB of vm space and handles
  * larger physical memory designs better.
  */
-#define VMALLOC_END       (PAGE_OFFSET + 0x30000000)
+#define VMALLOC_END       0xf0000000
diff --git a/arch/arm/mach-clps711x/autcpu12.c b/arch/arm/mach-clps711x/autcpu12.c
index 5f18eccdc72..4a74b2c959b 100644
--- a/arch/arm/mach-clps711x/autcpu12.c
+++ b/arch/arm/mach-clps711x/autcpu12.c
@@ -64,8 +64,6 @@ void __init autcpu12_map_io(void)
 
 MACHINE_START(AUTCPU12, "autronix autcpu12")
 	/* Maintainer: Thomas Gleixner */
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xff000000) >> 18) & 0xfffc,
 	.boot_params	= 0xc0020000,
 	.map_io		= autcpu12_map_io,
 	.init_irq	= clps711x_init_irq,
diff --git a/arch/arm/mach-clps711x/cdb89712.c b/arch/arm/mach-clps711x/cdb89712.c
index 71a80b5b8ad..5a1689d4879 100644
--- a/arch/arm/mach-clps711x/cdb89712.c
+++ b/arch/arm/mach-clps711x/cdb89712.c
@@ -55,8 +55,6 @@ static void __init cdb89712_map_io(void)
 
 MACHINE_START(CDB89712, "Cirrus-CDB89712")
 	/* Maintainer: Ray Lehtiniemi */
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xff000000) >> 18) & 0xfffc,
 	.boot_params	= 0xc0000100,
 	.map_io		= cdb89712_map_io,
 	.init_irq	= clps711x_init_irq,
diff --git a/arch/arm/mach-clps711x/ceiva.c b/arch/arm/mach-clps711x/ceiva.c
index 8ada2018497..16481cf3e93 100644
--- a/arch/arm/mach-clps711x/ceiva.c
+++ b/arch/arm/mach-clps711x/ceiva.c
@@ -56,8 +56,6 @@ static void __init ceiva_map_io(void)
 
 MACHINE_START(CEIVA, "CEIVA/Polaroid Photo MAX Digital Picture Frame")
 	/* Maintainer: Rob Scott */
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xff000000) >> 18) & 0xfffc,
 	.boot_params	= 0xc0000100,
 	.map_io		= ceiva_map_io,
 	.init_irq	= clps711x_init_irq,
diff --git a/arch/arm/mach-clps711x/clep7312.c b/arch/arm/mach-clps711x/clep7312.c
index 3c3bf45039f..67b5abb4a60 100644
--- a/arch/arm/mach-clps711x/clep7312.c
+++ b/arch/arm/mach-clps711x/clep7312.c
@@ -37,8 +37,6 @@ fixup_clep7312(struct machine_desc *desc, struct tag *tags,
 
 MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312")
 	/* Maintainer: Nobody */
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xff000000) >> 18) & 0xfffc,
 	.boot_params	= 0xc0000100,
 	.fixup		= fixup_clep7312,
 	.map_io		= clps711x_map_io,
diff --git a/arch/arm/mach-clps711x/edb7211-arch.c b/arch/arm/mach-clps711x/edb7211-arch.c
index 4a7a2322979..98ca5b2e940 100644
--- a/arch/arm/mach-clps711x/edb7211-arch.c
+++ b/arch/arm/mach-clps711x/edb7211-arch.c
@@ -57,8 +57,6 @@ fixup_edb7211(struct machine_desc *desc, struct tag *tags,
 
 MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)")
 	/* Maintainer: Jon McClintock */
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xff000000) >> 18) & 0xfffc,
 	.boot_params	= 0xc0020100,	/* 0xc0000000 - 0xc001ffff can be video RAM */
 	.fixup		= fixup_edb7211,
 	.map_io		= edb7211_map_io,
diff --git a/arch/arm/mach-clps711x/fortunet.c b/arch/arm/mach-clps711x/fortunet.c
index a696099aa4f..b1cb479e71e 100644
--- a/arch/arm/mach-clps711x/fortunet.c
+++ b/arch/arm/mach-clps711x/fortunet.c
@@ -75,8 +75,6 @@ fortunet_fixup(struct machine_desc *desc, struct tag *tags,
 
 MACHINE_START(FORTUNET, "ARM-FortuNet")
 	/* Maintainer: FortuNet Inc. */
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xf0000000) >> 18) & 0xfffc,
 	.boot_params	= 0x00000000,
 	.fixup		= fortunet_fixup,
 	.map_io		= clps711x_map_io,
diff --git a/arch/arm/mach-clps711x/include/mach/debug-macro.S b/arch/arm/mach-clps711x/include/mach/debug-macro.S
index 072cc6b61ba..507c6873b7e 100644
--- a/arch/arm/mach-clps711x/include/mach/debug-macro.S
+++ b/arch/arm/mach-clps711x/include/mach/debug-macro.S
@@ -14,16 +14,14 @@
 #include <mach/hardware.h>
 #include <asm/hardware/clps7111.h>
 
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #CLPS7111_PHYS_BASE
-		movne	\rx, #CLPS7111_VIRT_BASE
+		.macro	addruart, rp, rv
 #ifndef CONFIG_DEBUG_CLPS711X_UART2
-		add	\rx, \rx, #0x0000	@ UART1
+		mov	\rp, #0x0000	@ UART1
 #else
-		add	\rx, \rx, #0x1000	@ UART2
+		mov	\rp, #0x1000	@ UART2
 #endif
+		orr	\rv, \rp, #CLPS7111_VIRT_BASE
+		orr	\rp, \rp, #CLPS7111_PHYS_BASE
 		.endm
 
 		.macro	senduart,rd,rx
diff --git a/arch/arm/mach-clps711x/include/mach/vmalloc.h b/arch/arm/mach-clps711x/include/mach/vmalloc.h
index ea6cc7beff2..30b3a287ed8 100644
--- a/arch/arm/mach-clps711x/include/mach/vmalloc.h
+++ b/arch/arm/mach-clps711x/include/mach/vmalloc.h
@@ -17,4 +17,4 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
+#define VMALLOC_END       0xd0000000
diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c
index 0d94a30fd6f..cefbce0480b 100644
--- a/arch/arm/mach-clps711x/p720t.c
+++ b/arch/arm/mach-clps711x/p720t.c
@@ -89,8 +89,6 @@ static void __init p720t_map_io(void)
 
 MACHINE_START(P720T, "ARM-Prospector720T")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xff000000) >> 18) & 0xfffc,
 	.boot_params	= 0xc0000100,
 	.fixup		= fixup_p720t,
 	.map_io		= p720t_map_io,
diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c
index 9df8391fd78..90fe9ab8591 100644
--- a/arch/arm/mach-cns3xxx/cns3420vb.c
+++ b/arch/arm/mach-cns3xxx/cns3420vb.c
@@ -142,8 +142,6 @@ static void __init cns3420_map_io(void)
 }
 
 MACHINE_START(CNS3420VB, "Cavium Networks CNS3420 Validation Board")
-	.phys_io	= CNS3XXX_UART0_BASE,
-	.io_pg_offst	= (CNS3XXX_UART0_BASE_VIRT >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.map_io		= cns3420_map_io,
 	.init_irq	= cns3xxx_init_irq,
diff --git a/arch/arm/mach-cns3xxx/include/mach/debug-macro.S b/arch/arm/mach-cns3xxx/include/mach/debug-macro.S
index d16ce7eb00e..56d828634db 100644
--- a/arch/arm/mach-cns3xxx/include/mach/debug-macro.S
+++ b/arch/arm/mach-cns3xxx/include/mach/debug-macro.S
@@ -10,12 +10,10 @@
  * published by the Free Software Foundation.
  */
 
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx,      #0x10000000
-		movne	\rx,      #0xf0000000	@ virtual base
-		orr	\rx, \rx, #0x00009000
+		.macro	addruart,rp,rv
+		mov	\rp, #0x00009000
+		orr	\rv, \rp, #0xf0000000	@ virtual base
+		orr	\rp, \rp, #0x10000000
 		.endm
 
 #include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index c3994f341e4..7f3cdbfc0fb 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -597,8 +597,6 @@ static void __init da830_evm_map_io(void)
 }
 
 MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137 EVM")
-	.phys_io	= IO_PHYS,
-	.io_pg_offst	= (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
 	.boot_params	= (DA8XX_DDR_BASE + 0x100),
 	.map_io		= da830_evm_map_io,
 	.init_irq	= cp_intc_init,
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index fdc2cc500fc..b26f5cbfce3 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -817,8 +817,6 @@ static void __init da850_evm_map_io(void)
 }
 
 MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138 EVM")
-	.phys_io	= IO_PHYS,
-	.io_pg_offst	= (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
 	.boot_params	= (DA8XX_DDR_BASE + 0x100),
 	.map_io		= da850_evm_map_io,
 	.init_irq	= cp_intc_init,
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index a3191015efe..6e7cad13352 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -351,8 +351,6 @@ static __init void dm355_evm_init(void)
 }
 
 MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM")
-	.phys_io      = IO_PHYS,
-	.io_pg_offst  = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
 	.boot_params  = (0x80000100),
 	.map_io	      = dm355_evm_map_io,
 	.init_irq     = davinci_irq_init,
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index f1d8132cf0c..543f9911b28 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -270,8 +270,6 @@ static __init void dm355_leopard_init(void)
 }
 
 MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard")
-	.phys_io      = IO_PHYS,
-	.io_pg_offst  = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
 	.boot_params  = (0x80000100),
 	.map_io	      = dm355_leopard_map_io,
 	.init_irq     = davinci_irq_init,
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 84acef1d0b3..944a0cbaf5c 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -613,8 +613,6 @@ static __init void dm365_evm_init(void)
 }
 
 MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM")
-	.phys_io	= IO_PHYS,
-	.io_pg_offst	= (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
 	.boot_params	= (0x80000100),
 	.map_io		= dm365_evm_map_io,
 	.init_irq	= davinci_irq_init,
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 34c8b418cd7..d59fba15ba8 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -706,8 +706,6 @@ static __init void davinci_evm_init(void)
 
 MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM")
 	/* Maintainer: MontaVista Software <source@mvista.com> */
-	.phys_io      = IO_PHYS,
-	.io_pg_offst  = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
 	.boot_params  = (DAVINCI_DDR_BASE + 0x100),
 	.map_io	      = davinci_evm_map_io,
 	.init_irq     = davinci_irq_init,
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 4502f346b2b..6890488fb92 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -786,8 +786,6 @@ void __init dm646x_board_setup_refclk(struct clk *clk)
 }
 
 MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
-	.phys_io      = IO_PHYS,
-	.io_pg_offst  = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
 	.boot_params  = (0x80000100),
 	.map_io       = davinci_map_io,
 	.init_irq     = davinci_irq_init,
@@ -796,8 +794,6 @@ MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
 MACHINE_END
 
 MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM")
-	.phys_io      = IO_PHYS,
-	.io_pg_offst  = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
 	.boot_params  = (0x80000100),
 	.map_io       = davinci_map_io,
 	.init_irq     = davinci_irq_init,
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index 4c30e929bbf..a4def889275 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -275,8 +275,6 @@ static __init void davinci_ntosd2_init(void)
 
 MACHINE_START(NEUROS_OSD2, "Neuros OSD2")
 	/* Maintainer: Neuros Technologies <neuros@groups.google.com> */
-	.phys_io	= IO_PHYS,
-	.io_pg_offst	= (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
 	.boot_params	= (DAVINCI_DDR_BASE + 0x100),
 	.map_io		 = davinci_ntosd2_map_io,
 	.init_irq	= davinci_irq_init,
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
index 23e664a1a80..9bdf8aafcc8 100644
--- a/arch/arm/mach-davinci/board-sffsdr.c
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -154,8 +154,6 @@ static __init void davinci_sffsdr_init(void)
 
 MACHINE_START(SFFSDR, "Lyrtech SFFSDR")
 	/* Maintainer: Hugo Villeneuve hugo.villeneuve@lyrtech.com */
-	.phys_io      = IO_PHYS,
-	.io_pg_offst  = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
 	.boot_params  = (DAVINCI_DDR_BASE + 0x100),
 	.map_io	      = davinci_sffsdr_map_io,
 	.init_irq     = davinci_irq_init,
diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c
index fe2a9d9c8bb..b4de35b7890 100644
--- a/arch/arm/mach-davinci/board-tnetv107x-evm.c
+++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c
@@ -164,8 +164,6 @@ console_initcall(tnetv107x_evm_console_init);
 #endif
 
 MACHINE_START(TNETV107X, "TNETV107X EVM")
-	.phys_io	= TNETV107X_IO_BASE,
-	.io_pg_offst	= (TNETV107X_IO_VIRT >> 18) & 0xfffc,
 	.boot_params	= (TNETV107X_DDR_BASE + 0x100),
 	.map_io		= tnetv107x_init,
 	.init_irq	= cp_intc_init,
diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S
index f761dfdb868..9f1befc5ac3 100644
--- a/arch/arm/mach-davinci/include/mach/debug-macro.S
+++ b/arch/arm/mach-davinci/include/mach/debug-macro.S
@@ -29,35 +29,39 @@ davinci_uart_phys:	.word	0
 davinci_uart_virt:	.word	0
 		.popsection
 
-		.macro addruart, rx, tmp
+		.macro addruart, rp, rv
 
 		/* Use davinci_uart_phys/virt if already configured */
-10:		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		ldreq	\rx, =__virt_to_phys(davinci_uart_phys)
-		ldrne	\rx, =davinci_uart_virt
-		ldr	\rx, [\rx]
-		cmp	\rx, #0			@ is port configured?
+10:		mrc	p15, 0, \rp, c1, c0
+		tst	\rp, #1			@ MMU enabled?
+		ldreq	\rp, =__virt_to_phys(davinci_uart_phys)
+		ldrne	\rp, =davinci_uart_phys
+		add	\rv, \rp, #4		@ davinci_uart_virt
+		ldr	\rp, [\rp, #0]
+		ldr	\rv, [\rv, #0]
+		cmp	\rp, #0			@ is port configured?
+		cmpne	\rv, #0
 		bne	99f			@ already configured
 
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
+		/* Check the debug UART address set in uncompress.h */
+		mrc	p15, 0, \rp, c1, c0
+		tst	\rp, #1			@ MMU enabled?
 
 		/* Copy uart phys address from decompressor uart info */
-		ldreq	\tmp, =__virt_to_phys(davinci_uart_phys)
-		ldrne	\tmp, =davinci_uart_phys
-		ldreq	\rx, =DAVINCI_UART_INFO
-		ldrne	\rx, =__phys_to_virt(DAVINCI_UART_INFO)
-		ldr	\rx, [\rx, #0]
-		str	\rx, [\tmp]
+		ldreq	\rv, =__virt_to_phys(davinci_uart_phys)
+		ldrne	\rv, =davinci_uart_phys
+		ldreq	\rp, =DAVINCI_UART_INFO
+		ldrne	\rp, =__phys_to_virt(DAVINCI_UART_INFO)
+		ldr	\rp, [\rp, #0]
+		str	\rp, [\rv]
 
 		/* Copy uart virt address from decompressor uart info */
-		ldreq	\tmp, =__virt_to_phys(davinci_uart_virt)
-		ldrne	\tmp, =davinci_uart_virt
-		ldreq	\rx, =DAVINCI_UART_INFO
-		ldrne	\rx, =__phys_to_virt(DAVINCI_UART_INFO)
-		ldr	\rx, [\rx, #4]
-		str	\rx, [\tmp]
+		ldreq	\rv, =__virt_to_phys(davinci_uart_virt)
+		ldrne	\rv, =davinci_uart_virt
+		ldreq	\rp, =DAVINCI_UART_INFO
+		ldrne	\rp, =__phys_to_virt(DAVINCI_UART_INFO)
+		ldr	\rp, [\rp, #4]
+		str	\rp, [\rv]
 
 		b	10b
 99:
diff --git a/arch/arm/mach-dove/dove-db-setup.c b/arch/arm/mach-dove/dove-db-setup.c
index bef70460fbc..95925aa76dd 100644
--- a/arch/arm/mach-dove/dove-db-setup.c
+++ b/arch/arm/mach-dove/dove-db-setup.c
@@ -94,8 +94,6 @@ static void __init dove_db_init(void)
 }
 
 MACHINE_START(DOVE_DB, "Marvell DB-MV88AP510-BP Development Board")
-	.phys_io	= DOVE_SB_REGS_PHYS_BASE,
-	.io_pg_offst	= ((DOVE_SB_REGS_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.init_machine	= dove_db_init,
 	.map_io		= dove_map_io,
diff --git a/arch/arm/mach-dove/include/mach/debug-macro.S b/arch/arm/mach-dove/include/mach/debug-macro.S
index 1521d13f1d1..da8bf2bad3b 100644
--- a/arch/arm/mach-dove/include/mach/debug-macro.S
+++ b/arch/arm/mach-dove/include/mach/debug-macro.S
@@ -8,12 +8,11 @@
 
 #include <mach/bridge-regs.h>
 
-	.macro	addruart, rx, tmp
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1					@ MMU enabled?
-	ldreq	\rx, =DOVE_SB_REGS_PHYS_BASE
-	ldrne	\rx, =DOVE_SB_REGS_VIRT_BASE
-	orr	\rx, \rx, #0x00012000
+	.macro	addruart, rp, rv
+	ldr	\rp, =DOVE_SB_REGS_PHYS_BASE
+	ldr	\rv, =DOVE_SB_REGS_VIRT_BASE
+	orr	\rp, \rp, #0x00012000
+	orr	\rv, \rv, #0x00012000
 	.endm
 
 #define UART_SHIFT	2
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
index c7bc7fbb11a..5df4099fc14 100644
--- a/arch/arm/mach-ebsa110/core.c
+++ b/arch/arm/mach-ebsa110/core.c
@@ -280,8 +280,6 @@ arch_initcall(ebsa110_init);
 
 MACHINE_START(EBSA110, "EBSA110")
 	/* Maintainer: Russell King */
-	.phys_io	= 0xe0000000,
-	.io_pg_offst	= ((0xe0000000) >> 18) & 0xfffc,
 	.boot_params	= 0x00000400,
 	.reserve_lp0	= 1,
 	.reserve_lp2	= 1,
diff --git a/arch/arm/mach-ebsa110/include/mach/debug-macro.S b/arch/arm/mach-ebsa110/include/mach/debug-macro.S
index ebbd89f0e6c..7ef5690fd08 100644
--- a/arch/arm/mach-ebsa110/include/mach/debug-macro.S
+++ b/arch/arm/mach-ebsa110/include/mach/debug-macro.S
@@ -11,9 +11,10 @@
  *
 **/
 
-		.macro	addruart, rx, tmp
-		mov	\rx, #0xf0000000
-		orr	\rx, \rx, #0x00000be0
+		.macro	addruart, rp, rv
+		mov	\rp, #0xf0000000
+		orr	\rp, \rp, #0x00000be0
+		mov	\rp, \rv
 		.endm
 
 #define UART_SHIFT	2
diff --git a/arch/arm/mach-ebsa110/include/mach/vmalloc.h b/arch/arm/mach-ebsa110/include/mach/vmalloc.h
index 9b44c19e95e..60bde56fba4 100644
--- a/arch/arm/mach-ebsa110/include/mach/vmalloc.h
+++ b/arch/arm/mach-ebsa110/include/mach/vmalloc.h
@@ -7,4 +7,4 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#define VMALLOC_END       (PAGE_OFFSET + 0x1f000000)
+#define VMALLOC_END       0xdf000000
diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
index f744f676783..61b98ce4b67 100644
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ b/arch/arm/mach-ep93xx/adssphere.c
@@ -33,8 +33,6 @@ static void __init adssphere_init_machine(void)
 
 MACHINE_START(ADSSPHERE, "ADS Sphere board")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index c2ce9034ba8..4b043165213 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -124,8 +124,6 @@ static void __init edb93xx_init_machine(void)
 #ifdef CONFIG_MACH_EDB9301
 MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board")
 	/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
@@ -137,8 +135,6 @@ MACHINE_END
 #ifdef CONFIG_MACH_EDB9302
 MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
 	/* Maintainer: George Kashperko <george@chas.com.ua> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
@@ -150,8 +146,6 @@ MACHINE_END
 #ifdef CONFIG_MACH_EDB9302A
 MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
@@ -163,8 +157,6 @@ MACHINE_END
 #ifdef CONFIG_MACH_EDB9307
 MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
 	/* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
@@ -176,8 +168,6 @@ MACHINE_END
 #ifdef CONFIG_MACH_EDB9307A
 MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
 	/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
@@ -189,8 +179,6 @@ MACHINE_END
 #ifdef CONFIG_MACH_EDB9312
 MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
 	/* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
@@ -202,8 +190,6 @@ MACHINE_END
 #ifdef CONFIG_MACH_EDB9315
 MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
@@ -215,8 +201,6 @@ MACHINE_END
 #ifdef CONFIG_MACH_EDB9315A
 MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
index d97168c0ba3..9bd3152bff9 100644
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -33,8 +33,6 @@ static void __init gesbc9312_init_machine(void)
 
 MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
diff --git a/arch/arm/mach-ep93xx/include/mach/debug-macro.S b/arch/arm/mach-ep93xx/include/mach/debug-macro.S
index 5cd22444e22..b25bc907636 100644
--- a/arch/arm/mach-ep93xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ep93xx/include/mach/debug-macro.S
@@ -11,12 +11,11 @@
  */
 #include <mach/ep93xx-regs.h>
 
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1				@ MMU enabled?
-		ldreq	\rx, =EP93XX_APB_PHYS_BASE	@ Physical base
-		ldrne	\rx, =EP93XX_APB_VIRT_BASE	@ virtual base
-		orr	\rx, \rx, #0x000c0000
+		.macro	addruart, rp, rv
+		ldr	\rp, =EP93XX_APB_PHYS_BASE	@ Physical base
+		ldr	\rv, =EP93XX_APB_VIRT_BASE	@ virtual base
+		orr	\rp, \rp, #0x000c0000
+		orr	\rv, \rv, #0x000c0000
 		.endm
 
 #include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index 2ba776320a8..7adea6258ef 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -77,8 +77,6 @@ static void __init micro9_init_machine(void)
 #ifdef CONFIG_MACH_MICRO9H
 MACHINE_START(MICRO9, "Contec Micro9-High")
 	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
@@ -90,8 +88,6 @@ MACHINE_END
 #ifdef CONFIG_MACH_MICRO9M
 MACHINE_START(MICRO9M, "Contec Micro9-Mid")
 	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
@@ -103,8 +99,6 @@ MACHINE_END
 #ifdef CONFIG_MACH_MICRO9L
 MACHINE_START(MICRO9L, "Contec Micro9-Lite")
 	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
@@ -116,8 +110,6 @@ MACHINE_END
 #ifdef CONFIG_MACH_MICRO9S
 MACHINE_START(MICRO9S, "Contec Micro9-Slim")
 	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c
index 5dded588413..f22ce8db794 100644
--- a/arch/arm/mach-ep93xx/simone.c
+++ b/arch/arm/mach-ep93xx/simone.c
@@ -65,8 +65,6 @@ static void __init simone_init_machine(void)
 
 MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")
 /* Maintainer: Ryan Mallon <ryan@bluewatersys.com> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c
index a12c8930129..ac601fe2b44 100644
--- a/arch/arm/mach-ep93xx/snappercl15.c
+++ b/arch/arm/mach-ep93xx/snappercl15.c
@@ -163,8 +163,6 @@ static void __init snappercl15_init_machine(void)
 
 MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15")
 	/* Maintainer: Ryan Mallon <ryan@bluewatersys.com> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index 93aeab8af70..c2d2cf40ead 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -257,8 +257,6 @@ static void __init ts72xx_init_machine(void)
 
 MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
 	.map_io		= ts72xx_map_io,
 	.init_irq	= ep93xx_init_irq,
diff --git a/arch/arm/mach-footbridge/cats-hw.c b/arch/arm/mach-footbridge/cats-hw.c
index 1b996b26d2e..5b1a8db779b 100644
--- a/arch/arm/mach-footbridge/cats-hw.c
+++ b/arch/arm/mach-footbridge/cats-hw.c
@@ -86,8 +86,6 @@ fixup_cats(struct machine_desc *desc, struct tag *tags,
 
 MACHINE_START(CATS, "Chalice-CATS")
 	/* Maintainer: Philip Blundell */
-	.phys_io	= DC21285_ARMCSR_BASE,
-	.io_pg_offst	= ((0xfe000000) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.soft_reboot	= 1,
 	.fixup		= fixup_cats,
diff --git a/arch/arm/mach-footbridge/ebsa285.c b/arch/arm/mach-footbridge/ebsa285.c
index 30040fd588c..2ef69ff44ba 100644
--- a/arch/arm/mach-footbridge/ebsa285.c
+++ b/arch/arm/mach-footbridge/ebsa285.c
@@ -15,8 +15,6 @@
 
 MACHINE_START(EBSA285, "EBSA285")
 	/* Maintainer: Russell King */
-	.phys_io	= DC21285_ARMCSR_BASE,
-	.io_pg_offst	= ((0xfe000000) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.video_start	= 0x000a0000,
 	.video_end	= 0x000bffff,
diff --git a/arch/arm/mach-footbridge/include/mach/debug-macro.S b/arch/arm/mach-footbridge/include/mach/debug-macro.S
index 60dda1318f2..3c9e0c40c67 100644
--- a/arch/arm/mach-footbridge/include/mach/debug-macro.S
+++ b/arch/arm/mach-footbridge/include/mach/debug-macro.S
@@ -15,12 +15,10 @@
 
 #ifndef CONFIG_DEBUG_DC21285_PORT
 	/* For NetWinder debugging */
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x7c000000	@ physical
-		movne	\rx, #0xff000000	@ virtual
-		orr	\rx, \rx, #0x000003f8
+		.macro	addruart, rp, rv
+		mov	\rp, #0x000003f8
+		orr	\rv, \rp, #0x7c000000	@ physical
+		orr	\rp, \rp, #0xff000000	@ virtual
 		.endm
 
 #define UART_SHIFT	0
@@ -32,14 +30,14 @@
 		.equ	dc21285_high, ARMCSR_BASE & 0xff000000
 		.equ	dc21285_low,  ARMCSR_BASE & 0x00ffffff
 
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x42000000
-		movne	\rx, #dc21285_high
+		.macro	addruart, rp, rv
 		.if	dc21285_low
-		orrne	\rx, \rx, #dc21285_low
+		mov	\rp, #dc21285_low
+		.else
+		mov	\rp, #0
 		.endif
+		orr	\rv, \rp, #0x42000000
+		orr	\rp, \rp, #dc21285_high
 		.endm
 
 		.macro	senduart,rd,rx
diff --git a/arch/arm/mach-footbridge/include/mach/vmalloc.h b/arch/arm/mach-footbridge/include/mach/vmalloc.h
index d0958d860a3..0ffbb7c85e5 100644
--- a/arch/arm/mach-footbridge/include/mach/vmalloc.h
+++ b/arch/arm/mach-footbridge/include/mach/vmalloc.h
@@ -7,4 +7,4 @@
  */
 
 
-#define VMALLOC_END       (PAGE_OFFSET + 0x30000000)
+#define VMALLOC_END       0xf0000000
diff --git a/arch/arm/mach-footbridge/netwinder-hw.c b/arch/arm/mach-footbridge/netwinder-hw.c
index ac7ffa6fc41..06e514f372d 100644
--- a/arch/arm/mach-footbridge/netwinder-hw.c
+++ b/arch/arm/mach-footbridge/netwinder-hw.c
@@ -648,8 +648,6 @@ fixup_netwinder(struct machine_desc *desc, struct tag *tags,
 
 MACHINE_START(NETWINDER, "Rebel-NetWinder")
 	/* Maintainer: Russell King/Rebel.com */
-	.phys_io	= DC21285_ARMCSR_BASE,
-	.io_pg_offst	= ((0xfe000000) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.video_start	= 0x000a0000,
 	.video_end	= 0x000bffff,
diff --git a/arch/arm/mach-footbridge/personal.c b/arch/arm/mach-footbridge/personal.c
index e2c9f0690b1..3285e91ca8c 100644
--- a/arch/arm/mach-footbridge/personal.c
+++ b/arch/arm/mach-footbridge/personal.c
@@ -15,8 +15,6 @@
 
 MACHINE_START(PERSONAL_SERVER, "Compaq-PersonalServer")
 	/* Maintainer: Jamey Hicks / George France */
-	.phys_io	= DC21285_ARMCSR_BASE,
-	.io_pg_offst	= ((0xfe000000) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.map_io		= footbridge_map_io,
 	.init_irq	= footbridge_init_irq,
diff --git a/arch/arm/mach-gemini/board-nas4220b.c b/arch/arm/mach-gemini/board-nas4220b.c
index 01f1d6daab4..2ba096de003 100644
--- a/arch/arm/mach-gemini/board-nas4220b.c
+++ b/arch/arm/mach-gemini/board-nas4220b.c
@@ -101,8 +101,6 @@ static void __init ib4220b_init(void)
 }
 
 MACHINE_START(NAS4220B, "Raidsonic NAS IB-4220-B")
-	.phys_io	= 0x7fffc000,
-	.io_pg_offst	= ((0xffffc000) >> 18) & 0xfffc,
 	.boot_params	= 0x100,
 	.map_io		= gemini_map_io,
 	.init_irq	= gemini_init_irq,
diff --git a/arch/arm/mach-gemini/board-rut1xx.c b/arch/arm/mach-gemini/board-rut1xx.c
index e0de968e32a..a9a0d8b0194 100644
--- a/arch/arm/mach-gemini/board-rut1xx.c
+++ b/arch/arm/mach-gemini/board-rut1xx.c
@@ -85,8 +85,6 @@ static void __init rut1xx_init(void)
 }
 
 MACHINE_START(RUT100, "Teltonika RUT100")
-	.phys_io	= 0x7fffc000,
-	.io_pg_offst	= ((0xffffc000) >> 18) & 0xfffc,
 	.boot_params	= 0x100,
 	.map_io		= gemini_map_io,
 	.init_irq	= gemini_init_irq,
diff --git a/arch/arm/mach-gemini/board-wbd111.c b/arch/arm/mach-gemini/board-wbd111.c
index 36538c15b3c..8b88d50d433 100644
--- a/arch/arm/mach-gemini/board-wbd111.c
+++ b/arch/arm/mach-gemini/board-wbd111.c
@@ -133,8 +133,6 @@ static void __init wbd111_init(void)
 }
 
 MACHINE_START(WBD111, "Wiliboard WBD-111")
-	.phys_io	= 0x7fffc000,
-	.io_pg_offst	= ((0xffffc000) >> 18) & 0xfffc,
 	.boot_params	= 0x100,
 	.map_io		= gemini_map_io,
 	.init_irq	= gemini_init_irq,
diff --git a/arch/arm/mach-gemini/board-wbd222.c b/arch/arm/mach-gemini/board-wbd222.c
index ece8b4c6511..1eebcecd1c3 100644
--- a/arch/arm/mach-gemini/board-wbd222.c
+++ b/arch/arm/mach-gemini/board-wbd222.c
@@ -133,8 +133,6 @@ static void __init wbd222_init(void)
 }
 
 MACHINE_START(WBD222, "Wiliboard WBD-222")
-	.phys_io	= 0x7fffc000,
-	.io_pg_offst	= ((0xffffc000) >> 18) & 0xfffc,
 	.boot_params	= 0x100,
 	.map_io		= gemini_map_io,
 	.init_irq	= gemini_init_irq,
diff --git a/arch/arm/mach-gemini/include/mach/debug-macro.S b/arch/arm/mach-gemini/include/mach/debug-macro.S
index ad477047069..f40e006d296 100644
--- a/arch/arm/mach-gemini/include/mach/debug-macro.S
+++ b/arch/arm/mach-gemini/include/mach/debug-macro.S
@@ -11,11 +11,9 @@
  */
 #include <mach/hardware.h>
 
-	.macro	addruart, rx, tmp
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1					@ MMU enabled?
-	ldreq	\rx, =GEMINI_UART_BASE			@ physical
-	ldrne	\rx, =IO_ADDRESS(GEMINI_UART_BASE)	@ virtual
+	.macro	addruart, rp, rv
+	ldr	\rp, =GEMINI_UART_BASE			@ physical
+	ldr	\rv, =IO_ADDRESS(GEMINI_UART_BASE)	@ virtual
 	.endm
 
 #define UART_SHIFT	2
diff --git a/arch/arm/mach-h720x/h7201-eval.c b/arch/arm/mach-h720x/h7201-eval.c
index 78be457dc32..79f0b896e44 100644
--- a/arch/arm/mach-h720x/h7201-eval.c
+++ b/arch/arm/mach-h720x/h7201-eval.c
@@ -30,8 +30,6 @@
 
 MACHINE_START(H7201, "Hynix GMS30C7201")
 	/* Maintainer: Robert Schwebel, Pengutronix */
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xf0000000) >> 18) & 0xfffc,
 	.boot_params	= 0xc0001000,
 	.map_io		= h720x_map_io,
 	.init_irq	= h720x_init_irq,
diff --git a/arch/arm/mach-h720x/h7202-eval.c b/arch/arm/mach-h720x/h7202-eval.c
index 8c0ba99d683..cc28b1efe04 100644
--- a/arch/arm/mach-h720x/h7202-eval.c
+++ b/arch/arm/mach-h720x/h7202-eval.c
@@ -72,8 +72,6 @@ static void __init init_eval_h7202(void)
 
 MACHINE_START(H7202, "Hynix HMS30C7202")
 	/* Maintainer: Robert Schwebel, Pengutronix */
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xf0000000) >> 18) & 0xfffc,
 	.boot_params	= 0x40000100,
 	.map_io		= h720x_map_io,
 	.init_irq	= h7202_init_irq,
diff --git a/arch/arm/mach-h720x/include/mach/debug-macro.S b/arch/arm/mach-h720x/include/mach/debug-macro.S
index 27cafd12f03..c2093e83572 100644
--- a/arch/arm/mach-h720x/include/mach/debug-macro.S
+++ b/arch/arm/mach-h720x/include/mach/debug-macro.S
@@ -16,12 +16,10 @@
 		.equ    io_virt, IO_VIRT
 		.equ    io_phys, IO_PHYS
 
-		.macro  addruart, rx, tmp
-		mrc     p15, 0, \rx, c1, c0
-		tst     \rx, #1  	       @ MMU enabled?
-		moveq   \rx, #io_phys	       @ physical base address
-		movne   \rx, #io_virt	       @ virtual address
-		add     \rx, \rx, #0x00020000   @ UART1
+		.macro  addruart, rp, rv
+		mov     \rp, #0x00020000	@ UART1
+		add     \rv, \rp, #io_virt	@ virtual address
+		add     \rp, \rp, #io_phys	@ physical base address
 		.endm
 
 		.macro  senduart,rd,rx
diff --git a/arch/arm/mach-h720x/include/mach/vmalloc.h b/arch/arm/mach-h720x/include/mach/vmalloc.h
index ff1460d6841..a45915b8875 100644
--- a/arch/arm/mach-h720x/include/mach/vmalloc.h
+++ b/arch/arm/mach-h720x/include/mach/vmalloc.h
@@ -5,6 +5,6 @@
 #ifndef __ARCH_ARM_VMALLOC_H
 #define __ARCH_ARM_VMALLOC_H
 
-#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
+#define VMALLOC_END       0xd0000000
 
 #endif
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 2f7e2728970..197f9e241cf 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -147,8 +147,8 @@ choice
 	default MACH_EUKREA_MBIMX27_BASEBOARD
 
 config MACH_EUKREA_MBIMX27_BASEBOARD
-	prompt "Eukrea MBIMX27 development board"
-	bool
+	bool "Eukrea MBIMX27 development board"
+	select IMX_HAVE_PLATFORM_IMX_SSI
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	help
@@ -164,6 +164,15 @@ config MACH_MX27_3DS
 	  Include support for MX27PDK platform. This includes specific
 	  configurations for the board and its peripherals.
 
+config MACH_IMX27_VISSTRIM_M10
+	bool "Vista Silicon i.MX27 Visstrim_m10"
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	help
+	  Include support for Visstrim_m10 platform and its different variants.
+	  This includes specific configurations for the board and its
+	  peripherals.
+
 config MACH_IMX27LITE
 	bool "LogicPD MX27 LITEKIT platform"
 	select IMX_HAVE_PLATFORM_IMX_UART
@@ -174,6 +183,7 @@ config MACH_IMX27LITE
 config MACH_PCA100
 	bool "Phytec phyCARD-s (pca100)"
 	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_SSI
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_SPI_IMX
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 46a9fdfbbd1..5582692bb17 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o
 obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
 obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o
 obj-$(CONFIG_MACH_IMX27LITE) += mach-imx27lite.o
+obj-$(CONFIG_MACH_IMX27_VISSTRIM_M10) += mach-imx27_visstrim_m10.o
 obj-$(CONFIG_MACH_CPUIMX27) += mach-cpuimx27.o
 obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
 obj-$(CONFIG_MACH_PCA100) += mach-pca100.o
diff --git a/arch/arm/mach-imx/clock-imx1.c b/arch/arm/mach-imx/clock-imx1.c
index c05096c3830..daca30b2d5b 100644
--- a/arch/arm/mach-imx/clock-imx1.c
+++ b/arch/arm/mach-imx/clock-imx1.c
@@ -592,7 +592,7 @@ static struct clk_lookup lookups[] __initdata = {
 	_REGISTER_CLOCK("imx-uart.1", NULL, uart_clk)
 	_REGISTER_CLOCK("imx-uart.2", NULL, uart_clk)
 	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
-	_REGISTER_CLOCK("spi_imx.0", NULL, spi_clk)
+	_REGISTER_CLOCK("imx1-cspi.0", NULL, spi_clk)
 	_REGISTER_CLOCK("imx-mmc.0", NULL, sdhc_clk)
 	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
 	_REGISTER_CLOCK(NULL, "mshc", mshc_clk)
diff --git a/arch/arm/mach-imx/clock-imx21.c b/arch/arm/mach-imx/clock-imx21.c
index bb419ef4d13..cf15ea516a7 100644
--- a/arch/arm/mach-imx/clock-imx21.c
+++ b/arch/arm/mach-imx/clock-imx21.c
@@ -1172,9 +1172,9 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "pwm", pwm_clk[0])
 	_REGISTER_CLOCK(NULL, "sdhc1", sdhc_clk[0])
 	_REGISTER_CLOCK(NULL, "sdhc2", sdhc_clk[1])
-	_REGISTER_CLOCK(NULL, "cspi1", cspi_clk[0])
-	_REGISTER_CLOCK(NULL, "cspi2", cspi_clk[1])
-	_REGISTER_CLOCK(NULL, "cspi3", cspi_clk[2])
+	_REGISTER_CLOCK("imx21-cspi.0", NULL, cspi_clk[0])
+	_REGISTER_CLOCK("imx21-cspi.1", NULL, cspi_clk[1])
+	_REGISTER_CLOCK("imx21-cspi.2", NULL, cspi_clk[2])
 	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk[0])
 	_REGISTER_CLOCK(NULL, "csi", csi_clk[0])
 	_REGISTER_CLOCK("imx21-hcd.0", NULL, usb_clk[0])
diff --git a/arch/arm/mach-imx/clock-imx27.c b/arch/arm/mach-imx/clock-imx27.c
index 5a1aa15c8a1..98a25bada78 100644
--- a/arch/arm/mach-imx/clock-imx27.c
+++ b/arch/arm/mach-imx/clock-imx27.c
@@ -594,27 +594,27 @@ DEFINE_CLOCK(uart2_clk1,   0, PCCR1, 30, NULL, NULL, &ipg_clk);
 DEFINE_CLOCK(uart1_clk1,   0, PCCR1, 31, NULL, NULL, &ipg_clk);
 
 /* Clocks we cannot directly gate, but drivers need their rates */
-DEFINE_CLOCK(cspi1_clk,    0, 0,      0, NULL, &cspi1_clk1, &per2_clk);
-DEFINE_CLOCK(cspi2_clk,    1, 0,      0, NULL, &cspi2_clk1, &per2_clk);
-DEFINE_CLOCK(cspi3_clk,    2, 0,      0, NULL, &cspi13_clk1, &per2_clk);
-DEFINE_CLOCK(sdhc1_clk,    0, 0,      0, NULL, &sdhc1_clk1, &per2_clk);
-DEFINE_CLOCK(sdhc2_clk,    1, 0,      0, NULL, &sdhc2_clk1, &per2_clk);
-DEFINE_CLOCK(sdhc3_clk,    2, 0,      0, NULL, &sdhc3_clk1, &per2_clk);
-DEFINE_CLOCK(pwm_clk,      0, 0,      0, NULL, &pwm_clk1, &per1_clk);
-DEFINE_CLOCK(gpt1_clk,     0, 0,      0, NULL, &gpt1_clk1, &per1_clk);
-DEFINE_CLOCK(gpt2_clk,     1, 0,      0, NULL, &gpt2_clk1, &per1_clk);
-DEFINE_CLOCK(gpt3_clk,     2, 0,      0, NULL, &gpt3_clk1, &per1_clk);
-DEFINE_CLOCK(gpt4_clk,     3, 0,      0, NULL, &gpt4_clk1, &per1_clk);
-DEFINE_CLOCK(gpt5_clk,     4, 0,      0, NULL, &gpt5_clk1, &per1_clk);
-DEFINE_CLOCK(gpt6_clk,     5, 0,      0, NULL, &gpt6_clk1, &per1_clk);
-DEFINE_CLOCK(uart1_clk,    0, 0,      0, NULL, &uart1_clk1, &per1_clk);
-DEFINE_CLOCK(uart2_clk,    1, 0,      0, NULL, &uart2_clk1, &per1_clk);
-DEFINE_CLOCK(uart3_clk,    2, 0,      0, NULL, &uart3_clk1, &per1_clk);
-DEFINE_CLOCK(uart4_clk,    3, 0,      0, NULL, &uart4_clk1, &per1_clk);
-DEFINE_CLOCK(uart5_clk,    4, 0,      0, NULL, &uart5_clk1, &per1_clk);
-DEFINE_CLOCK(uart6_clk,    5, 0,      0, NULL, &uart6_clk1, &per1_clk);
-DEFINE_CLOCK1(lcdc_clk,    0, 0,      0, parent, &lcdc_clk1, &per3_clk);
-DEFINE_CLOCK1(csi_clk,     0, 0,      0, parent, &csi_clk1, &per4_clk);
+DEFINE_CLOCK(cspi1_clk,    0, NULL,   0, NULL, &cspi1_clk1, &per2_clk);
+DEFINE_CLOCK(cspi2_clk,    1, NULL,   0, NULL, &cspi2_clk1, &per2_clk);
+DEFINE_CLOCK(cspi3_clk,    2, NULL,   0, NULL, &cspi13_clk1, &per2_clk);
+DEFINE_CLOCK(sdhc1_clk,    0, NULL,   0, NULL, &sdhc1_clk1, &per2_clk);
+DEFINE_CLOCK(sdhc2_clk,    1, NULL,   0, NULL, &sdhc2_clk1, &per2_clk);
+DEFINE_CLOCK(sdhc3_clk,    2, NULL,   0, NULL, &sdhc3_clk1, &per2_clk);
+DEFINE_CLOCK(pwm_clk,      0, NULL,   0, NULL, &pwm_clk1, &per1_clk);
+DEFINE_CLOCK(gpt1_clk,     0, NULL,   0, NULL, &gpt1_clk1, &per1_clk);
+DEFINE_CLOCK(gpt2_clk,     1, NULL,   0, NULL, &gpt2_clk1, &per1_clk);
+DEFINE_CLOCK(gpt3_clk,     2, NULL,   0, NULL, &gpt3_clk1, &per1_clk);
+DEFINE_CLOCK(gpt4_clk,     3, NULL,   0, NULL, &gpt4_clk1, &per1_clk);
+DEFINE_CLOCK(gpt5_clk,     4, NULL,   0, NULL, &gpt5_clk1, &per1_clk);
+DEFINE_CLOCK(gpt6_clk,     5, NULL,   0, NULL, &gpt6_clk1, &per1_clk);
+DEFINE_CLOCK(uart1_clk,    0, NULL,   0, NULL, &uart1_clk1, &per1_clk);
+DEFINE_CLOCK(uart2_clk,    1, NULL,   0, NULL, &uart2_clk1, &per1_clk);
+DEFINE_CLOCK(uart3_clk,    2, NULL,   0, NULL, &uart3_clk1, &per1_clk);
+DEFINE_CLOCK(uart4_clk,    3, NULL,   0, NULL, &uart4_clk1, &per1_clk);
+DEFINE_CLOCK(uart5_clk,    4, NULL,   0, NULL, &uart5_clk1, &per1_clk);
+DEFINE_CLOCK(uart6_clk,    5, NULL,   0, NULL, &uart6_clk1, &per1_clk);
+DEFINE_CLOCK1(lcdc_clk,    0, NULL,   0, parent, &lcdc_clk1, &per3_clk);
+DEFINE_CLOCK1(csi_clk,     0, NULL,   0, parent, &csi_clk1, &per4_clk);
 
 #define _REGISTER_CLOCK(d, n, c) \
 	{ \
@@ -640,9 +640,9 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk)
 	_REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk)
 	_REGISTER_CLOCK("mxc-mmc.2", NULL, sdhc3_clk)
-	_REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
-	_REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
-	_REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
+	_REGISTER_CLOCK("imx27-cspi.0", NULL, cspi1_clk)
+	_REGISTER_CLOCK("imx27-cspi.1", NULL, cspi2_clk)
+	_REGISTER_CLOCK("imx27-cspi.2", NULL, cspi3_clk)
 	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
 	_REGISTER_CLOCK("mx2-camera.0", NULL, csi_clk)
 	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk)
diff --git a/arch/arm/mach-imx/devices-imx1.h b/arch/arm/mach-imx/devices-imx1.h
index a8d94f07819..81979486218 100644
--- a/arch/arm/mach-imx/devices-imx1.h
+++ b/arch/arm/mach-imx/devices-imx1.h
@@ -9,10 +9,12 @@
 #include <mach/mx1.h>
 #include <mach/devices-common.h>
 
-#define imx1_add_i2c_imx(pdata)		\
-	imx_add_imx_i2c(0, MX1_I2C_BASE_ADDR, SZ_4K, MX1_INT_I2C, pdata)
+extern const struct imx_imx_i2c_data imx1_imx_i2c_data __initconst;
+#define imx1_add_imx_i2c(pdata)		\
+	imx_add_imx_i2c(&imx1_imx_i2c_data, pdata)
 
-#define imx1_add_imx_uart0(pdata)	\
-	imx_add_imx_uart_3irq(0, MX1_UART1_BASE_ADDR, 0xd0, MX1_INT_UART1RX, MX1_INT_UART1TX, MX1_INT_UART1RTS, pdata)
-#define imx1_add_imx_uart1(pdata)	\
-	imx_add_imx_uart_3irq(0, MX1_UART2_BASE_ADDR, 0xd0, MX1_INT_UART2RX, MX1_INT_UART2TX, MX1_INT_UART2RTS, pdata)
+extern const struct imx_imx_uart_3irq_data imx1_imx_uart_data[] __initconst;
+#define imx1_add_imx_uart(id, pdata)	\
+	imx_add_imx_uart_3irq(&imx1_imx_uart_data[id], pdata)
+#define imx1_add_imx_uart0(pdata)	imx1_add_imx_uart(0, pdata)
+#define imx1_add_imx_uart1(pdata)	imx1_add_imx_uart(1, pdata)
diff --git a/arch/arm/mach-imx/devices-imx21.h b/arch/arm/mach-imx/devices-imx21.h
index 42788e99d12..d189039749b 100644
--- a/arch/arm/mach-imx/devices-imx21.h
+++ b/arch/arm/mach-imx/devices-imx21.h
@@ -9,22 +9,28 @@
 #include <mach/mx21.h>
 #include <mach/devices-common.h>
 
-#define imx21_add_i2c_imx(pdata)	\
-	imx_add_imx_i2c(0, MX2x_I2C_BASE_ADDR, SZ_4K, MX2x_INT_I2C, pdata)
+extern const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst;
+#define imx21_add_imx_i2c(pdata)	\
+	imx_add_imx_i2c(&imx21_imx_i2c_data, pdata)
 
-#define imx21_add_imx_uart0(pdata)	\
-	imx_add_imx_uart_1irq(0, MX21_UART1_BASE_ADDR, SZ_4K, MX21_INT_UART1, pdata)
-#define imx21_add_imx_uart1(pdata)	\
-	imx_add_imx_uart_1irq(1, MX21_UART2_BASE_ADDR, SZ_4K, MX21_INT_UART2, pdata)
-#define imx21_add_imx_uart2(pdata)	\
-	imx_add_imx_uart_1irq(2, MX21_UART3_BASE_ADDR, SZ_4K, MX21_INT_UART3, pdata)
-#define imx21_add_imx_uart3(pdata)	\
-	imx_add_imx_uart_1irq(3, MX21_UART4_BASE_ADDR, SZ_4K, MX21_INT_UART4, pdata)
+extern const struct imx_imx_ssi_data imx21_imx_ssi_data[] __initconst;
+#define imx21_add_imx_ssi(id, pdata)	\
+	imx_add_imx_ssi(&imx21_imx_ssi_data[id], pdata)
 
+extern const struct imx_imx_uart_1irq_data imx21_imx_uart_data[] __initconst;
+#define imx21_add_imx_uart(id, pdata)	\
+	imx_add_imx_uart_1irq(&imx21_imx_uart_data[id], pdata)
+#define imx21_add_imx_uart0(pdata)	imx21_add_imx_uart(0, pdata)
+#define imx21_add_imx_uart1(pdata)	imx21_add_imx_uart(1, pdata)
+#define imx21_add_imx_uart2(pdata)	imx21_add_imx_uart(2, pdata)
+#define imx21_add_imx_uart3(pdata)	imx21_add_imx_uart(3, pdata)
+
+extern const struct imx_mxc_nand_data imx21_mxc_nand_data __initconst;
 #define imx21_add_mxc_nand(pdata)	\
-	imx_add_mxc_nand_v1(MX21_NFC_BASE_ADDR, MX21_INT_NANDFC, pdata)
+	imx_add_mxc_nand(&imx21_mxc_nand_data, pdata)
 
-#define imx21_add_spi_imx0(pdata)	\
-	imx_add_spi_imx(0, MX21_CSPI1_BASE_ADDR, SZ_4K, MX21_INT_CSPI1, pdata)
-#define imx21_add_spi_imx1(pdata)	\
-	imx_add_spi_imx(1, MX21_CSPI2_BASE_ADDR, SZ_4K, MX21_INT_CSPI2, pdata)
+extern const struct imx_spi_imx_data imx21_cspi_data[] __initconst;
+#define imx21_add_cspi(id, pdata)	\
+	imx_add_spi_imx(&imx21_cspi_data[id], pdata)
+#define imx21_add_spi_imx0(pdata)	imx21_add_cspi(0, pdata)
+#define imx21_add_spi_imx1(pdata)	imx21_add_cspi(1, pdata)
diff --git a/arch/arm/mach-imx/devices-imx27.h b/arch/arm/mach-imx/devices-imx27.h
index 65e7bb7ec2e..7011690364f 100644
--- a/arch/arm/mach-imx/devices-imx27.h
+++ b/arch/arm/mach-imx/devices-imx27.h
@@ -9,30 +9,35 @@
 #include <mach/mx27.h>
 #include <mach/devices-common.h>
 
-#define imx27_add_i2c_imx0(pdata)	\
-	imx_add_imx_i2c(0, MX27_I2C1_BASE_ADDR, SZ_4K, MX27_INT_I2C1, pdata)
-#define imx27_add_i2c_imx1(pdata)	\
-	imx_add_imx_i2c(1, MX27_I2C2_BASE_ADDR, SZ_4K, MX27_INT_I2C2, pdata)
+extern const struct imx_fec_data imx27_fec_data __initconst;
+#define imx27_add_fec(pdata)	\
+	imx_add_fec(&imx27_fec_data, pdata)
 
-#define imx27_add_imx_uart0(pdata)	\
-	imx_add_imx_uart_1irq(0, MX27_UART1_BASE_ADDR, SZ_4K, MX27_INT_UART1, pdata)
-#define imx27_add_imx_uart1(pdata)	\
-	imx_add_imx_uart_1irq(1, MX27_UART2_BASE_ADDR, SZ_4K, MX27_INT_UART2, pdata)
-#define imx27_add_imx_uart2(pdata)	\
-	imx_add_imx_uart_1irq(2, MX27_UART3_BASE_ADDR, SZ_4K, MX27_INT_UART3, pdata)
-#define imx27_add_imx_uart3(pdata)	\
-	imx_add_imx_uart_1irq(3, MX27_UART4_BASE_ADDR, SZ_4K, MX27_INT_UART4, pdata)
-#define imx27_add_imx_uart4(pdata)	\
-	imx_add_imx_uart_1irq(4, MX27_UART5_BASE_ADDR, SZ_4K, MX27_INT_UART5, pdata)
-#define imx27_add_imx_uart5(pdata)	\
-	imx_add_imx_uart_1irq(5, MX27_UART6_BASE_ADDR, SZ_4K, MX27_INT_UART6, pdata)
+extern const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst;
+#define imx27_add_imx_i2c(id, pdata)	\
+	imx_add_imx_i2c(&imx27_imx_i2c_data[id], pdata)
 
+extern const struct imx_imx_ssi_data imx27_imx_ssi_data[] __initconst;
+#define imx27_add_imx_ssi(id, pdata)    \
+	imx_add_imx_ssi(&imx27_imx_ssi_data[id], pdata)
+
+extern const struct imx_imx_uart_1irq_data imx27_imx_uart_data[] __initconst;
+#define imx27_add_imx_uart(id, pdata)	\
+	imx_add_imx_uart_1irq(&imx27_imx_uart_data[id], pdata)
+#define imx27_add_imx_uart0(pdata)	imx27_add_imx_uart(0, pdata)
+#define imx27_add_imx_uart1(pdata)	imx27_add_imx_uart(1, pdata)
+#define imx27_add_imx_uart2(pdata)	imx27_add_imx_uart(2, pdata)
+#define imx27_add_imx_uart3(pdata)	imx27_add_imx_uart(3, pdata)
+#define imx27_add_imx_uart4(pdata)	imx27_add_imx_uart(4, pdata)
+#define imx27_add_imx_uart5(pdata)	imx27_add_imx_uart(5, pdata)
+
+extern const struct imx_mxc_nand_data imx27_mxc_nand_data __initconst;
 #define imx27_add_mxc_nand(pdata)	\
-	imx_add_mxc_nand_v1(MX27_NFC_BASE_ADDR, MX27_INT_NANDFC, pdata)
+	imx_add_mxc_nand(&imx27_mxc_nand_data, pdata)
 
-#define imx27_add_spi_imx0(pdata)	\
-	imx_add_spi_imx(0, MX27_CSPI1_BASE_ADDR, SZ_4K, MX27_INT_CSPI1, pdata)
-#define imx27_add_spi_imx1(pdata)	\
-	imx_add_spi_imx(1, MX27_CSPI2_BASE_ADDR, SZ_4K, MX27_INT_CSPI2, pdata)
-#define imx27_add_spi_imx2(pdata)	\
-	imx_add_spi_imx(2, MX27_CSPI3_BASE_ADDR, SZ_4K, MX27_INT_CSPI3, pdata)
+extern const struct imx_spi_imx_data imx27_cspi_data[] __initconst;
+#define imx27_add_cspi(id, pdata)	\
+	imx_add_spi_imx(&imx27_cspi_data[id], pdata)
+#define imx27_add_spi_imx0(pdata)	imx27_add_cspi(0, pdata)
+#define imx27_add_spi_imx1(pdata)	imx27_add_cspi(1, pdata)
+#define imx27_add_spi_imx2(pdata)	imx27_add_cspi(2, pdata)
diff --git a/arch/arm/mach-imx/devices.c b/arch/arm/mach-imx/devices.c
index 9c271a752b8..fba5047de8b 100644
--- a/arch/arm/mach-imx/devices.c
+++ b/arch/arm/mach-imx/devices.c
@@ -314,27 +314,6 @@ struct platform_device mxc_fb_device = {
 	},
 };
 
-#ifdef CONFIG_MACH_MX27
-static struct resource mxc_fec_resources[] = {
-	{
-		.start = MX27_FEC_BASE_ADDR,
-		.end = MX27_FEC_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX27_INT_FEC,
-		.end = MX27_INT_FEC,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_fec_device = {
-	.name = "fec",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_fec_resources),
-	.resource = mxc_fec_resources,
-};
-#endif
-
 static struct resource mxc_pwm_resources[] = {
 	{
 		.start = MX2x_PWM_BASE_ADDR,
@@ -480,41 +459,6 @@ struct platform_device mxc_usbh2 = {
 };
 #endif
 
-#define DEFINE_IMX_SSI_DMARES(_name, ssin, suffix)			\
-	{								\
-		.name = _name,						\
-		.start = MX2x_DMA_REQ_SSI ## ssin ## _ ## suffix,	\
-		.end = MX2x_DMA_REQ_SSI ## ssin ## _ ## suffix,		\
-		.flags = IORESOURCE_DMA,				\
-	}
-
-#define DEFINE_IMX_SSI_DEVICE(n, ssin, baseaddr, irq)			\
-	static struct resource imx_ssi_resources ## n[] = {		\
-		{							\
-			.start = MX2x_SSI ## ssin ## _BASE_ADDR,	\
-			.end = MX2x_SSI ## ssin ## _BASE_ADDR + 0x6f,	\
-			.flags = IORESOURCE_MEM,			\
-		}, {							\
-			.start = MX2x_INT_SSI1,				\
-			.end = MX2x_INT_SSI1,				\
-			.flags = IORESOURCE_IRQ,			\
-		},							\
-		DEFINE_IMX_SSI_DMARES("tx0", ssin, TX0),		\
-		DEFINE_IMX_SSI_DMARES("rx0", ssin, RX0),		\
-		DEFINE_IMX_SSI_DMARES("tx1", ssin, TX1),		\
-		DEFINE_IMX_SSI_DMARES("rx1", ssin, RX1),		\
-	};								\
-									\
-	struct platform_device imx_ssi_device ## n = {			\
-		.name = "imx-ssi",					\
-		.id = n,						\
-		.num_resources = ARRAY_SIZE(imx_ssi_resources ## n),	\
-		.resource = imx_ssi_resources ## n,			\
-	}
-
-DEFINE_IMX_SSI_DEVICE(0, 1, MX2x_SSI1_BASE_ADDR, MX2x_INT_SSI1);
-DEFINE_IMX_SSI_DEVICE(1, 2, MX2x_SSI1_BASE_ADDR, MX2x_INT_SSI1);
-
 /* GPIO port description */
 #define DEFINE_MXC_GPIO_PORT_IRQ(SOC, n, _irq)				\
 	{								\
diff --git a/arch/arm/mach-imx/devices.h b/arch/arm/mach-imx/devices.h
index efd4527506a..807f02a031c 100644
--- a/arch/arm/mach-imx/devices.h
+++ b/arch/arm/mach-imx/devices.h
@@ -16,7 +16,6 @@ extern struct platform_device mxc_gpt5;
 extern struct platform_device mxc_wdt;
 extern struct platform_device mxc_w1_master_device;
 extern struct platform_device mxc_fb_device;
-extern struct platform_device mxc_fec_device;
 extern struct platform_device mxc_pwm_device;
 extern struct platform_device mxc_sdhc_device0;
 extern struct platform_device mxc_sdhc_device1;
@@ -26,7 +25,5 @@ extern struct platform_device mxc_otg_host;
 extern struct platform_device mxc_usbh1;
 extern struct platform_device mxc_usbh2;
 extern struct platform_device mx21_usbhc_device;
-extern struct platform_device imx_ssi_device0;
-extern struct platform_device imx_ssi_device1;
 extern struct platform_device imx_kpp_device;
 #endif
diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
index 4edc5f43920..026263c665c 100644
--- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
@@ -36,13 +36,12 @@
 #include <mach/hardware.h>
 #include <mach/mmc.h>
 #include <mach/spi.h>
-#include <mach/ssi.h>
 #include <mach/audmux.h>
 
 #include "devices-imx27.h"
 #include "devices.h"
 
-static int eukrea_mbimx27_pins[] = {
+static const int eukrea_mbimx27_pins[] __initconst = {
 	/* UART2 */
 	PE3_PF_UART2_CTS,
 	PE4_PF_UART2_RTS,
@@ -311,7 +310,8 @@ static struct imxmmc_platform_data sdhc_pdata = {
 	.dat3_card_detect = 1,
 };
 
-struct imx_ssi_platform_data eukrea_mbimx27_ssi_pdata = {
+static const
+struct imx_ssi_platform_data eukrea_mbimx27_ssi_pdata __initconst = {
 	.flags = IMX_SSI_DMA | IMX_SSI_USE_I2S_SLAVE,
 };
 
@@ -357,7 +357,7 @@ void __init eukrea_mbimx27_baseboard_init(void)
 	i2c_register_board_info(0, eukrea_mbimx27_i2c_devices,
 				ARRAY_SIZE(eukrea_mbimx27_i2c_devices));
 
-	mxc_register_device(&imx_ssi_device0, &eukrea_mbimx27_ssi_pdata);
+	imx27_add_imx_ssi(0, &eukrea_mbimx27_ssi_pdata);
 
 #if defined(CONFIG_TOUCHSCREEN_ADS7846) \
 	|| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
index 6830afd1d2b..745ee60fb06 100644
--- a/arch/arm/mach-imx/mach-cpuimx27.c
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -46,7 +46,7 @@
 #include "devices-imx27.h"
 #include "devices.h"
 
-static int eukrea_cpuimx27_pins[] = {
+static const int eukrea_cpuimx27_pins[] __initconst = {
 	/* UART1 */
 	PE12_PF_UART1_TXD,
 	PE13_PF_UART1_RXD,
@@ -157,7 +157,6 @@ cpuimx27_nand_board_info __initconst = {
 
 static struct platform_device *platform_devices[] __initdata = {
 	&eukrea_cpuimx27_nor_mtd_device,
-	&mxc_fec_device,
 	&mxc_wdt,
 	&mxc_w1_master_device,
 };
@@ -259,8 +258,9 @@ static void __init eukrea_cpuimx27_init(void)
 	i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices,
 				ARRAY_SIZE(eukrea_cpuimx27_i2c_devices));
 
-	imx27_add_i2c_imx0(&cpuimx27_i2c1_data);
+	imx27_add_imx_i2c(0, &cpuimx27_i2c1_data);
 
+	imx27_add_fec(NULL);
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
 #if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2)
@@ -307,8 +307,6 @@ static struct sys_timer eukrea_cpuimx27_timer = {
 };
 
 MACHINE_START(CPUIMX27, "EUKREA CPUIMX27")
-	.phys_io        = MX27_AIPI_BASE_ADDR,
-	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = MX27_PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
 	.init_irq       = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
new file mode 100644
index 00000000000..59716fab586
--- /dev/null
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -0,0 +1,261 @@
+/*
+ * mach-imx27_visstrim_m10.c
+ *
+ * Copyright 2010  Javier Martin <javier.martin@vista-silicon.com>
+ *
+ * Based on mach-pcm038.c, mach-pca100.c, mach-mx27ads.c and others.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/i2c.h>
+#include <linux/i2c/pca953x.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/common.h>
+#include <mach/mmc.h>
+#include <mach/iomux.h>
+#include <mach/mxc_ehci.h>
+
+#include "devices-imx27.h"
+#include "devices.h"
+
+#define OTG_PHY_CS_GPIO (GPIO_PORTF + 17)
+#define SDHC1_IRQ IRQ_GPIOB(25)
+
+static const int visstrim_m10_pins[] __initconst = {
+	/* UART1 (console) */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+	/* SDHC1 */
+	PE18_PF_SD1_D0,
+	PE19_PF_SD1_D1,
+	PE20_PF_SD1_D2,
+	PE21_PF_SD1_D3,
+	PE22_PF_SD1_CMD,
+	PE23_PF_SD1_CLK,
+	/* Both I2Cs */
+	PD17_PF_I2C_DATA,
+	PD18_PF_I2C_CLK,
+	PC5_PF_I2C2_SDA,
+	PC6_PF_I2C2_SCL,
+	/* USB OTG */
+	OTG_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT,
+	PC9_PF_USBOTG_DATA0,
+	PC11_PF_USBOTG_DATA1,
+	PC10_PF_USBOTG_DATA2,
+	PC13_PF_USBOTG_DATA3,
+	PC12_PF_USBOTG_DATA4,
+	PC7_PF_USBOTG_DATA5,
+	PC8_PF_USBOTG_DATA6,
+	PE25_PF_USBOTG_DATA7,
+	PE24_PF_USBOTG_CLK,
+	PE2_PF_USBOTG_DIR,
+	PE0_PF_USBOTG_NXT,
+	PE1_PF_USBOTG_STP,
+	PB23_PF_USB_PWR,
+	PB24_PF_USB_OC,
+};
+
+/* GPIOs used as events for applications */
+static struct gpio_keys_button visstrim_gpio_keys[] = {
+	{
+		.type	= EV_KEY,
+		.code	= KEY_RESTART,
+		.gpio	= (GPIO_PORTC + 15),
+		.desc	= "Default config",
+		.active_low = 0,
+		.wakeup = 1,
+	},
+	{
+		.type	= EV_KEY,
+		.code	= KEY_RECORD,
+		.gpio	= (GPIO_PORTF + 14),
+		.desc	= "Record",
+		.active_low = 0,
+		.wakeup = 1,
+	},
+	{
+		.type   = EV_KEY,
+		.code   = KEY_STOP,
+		.gpio   = (GPIO_PORTF + 13),
+		.desc   = "Stop",
+		.active_low = 0,
+		.wakeup = 1,
+	}
+};
+
+static struct gpio_keys_platform_data visstrim_gpio_keys_platform_data = {
+	.buttons	= visstrim_gpio_keys,
+	.nbuttons	= ARRAY_SIZE(visstrim_gpio_keys),
+};
+
+static struct platform_device visstrim_gpio_keys_device = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &visstrim_gpio_keys_platform_data,
+	},
+};
+
+/* Visstrim_SM10 has a microSD slot connected to sdhc1 */
+static int visstrim_m10_sdhc1_init(struct device *dev,
+		irq_handler_t detect_irq, void *data)
+{
+	int ret;
+
+	ret = request_irq(SDHC1_IRQ, detect_irq, IRQF_TRIGGER_FALLING,
+				"mmc-detect", data);
+	return ret;
+}
+
+static void visstrim_m10_sdhc1_exit(struct device *dev, void *data)
+{
+	free_irq(SDHC1_IRQ, data);
+}
+
+static struct imxmmc_platform_data visstrim_m10_sdhc_pdata = {
+	.init = visstrim_m10_sdhc1_init,
+	.exit = visstrim_m10_sdhc1_exit,
+};
+
+/* Visstrim_SM10 NOR flash */
+static struct physmap_flash_data visstrim_m10_flash_data = {
+	.width = 2,
+};
+
+static struct resource visstrim_m10_flash_resource = {
+	.start = 0xc0000000,
+	.end = 0xc0000000 + SZ_64M - 1,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device visstrim_m10_nor_mtd_device = {
+	.name = "physmap-flash",
+	.id = 0,
+	.dev = {
+		.platform_data = &visstrim_m10_flash_data,
+	},
+	.num_resources = 1,
+	.resource = &visstrim_m10_flash_resource,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&visstrim_gpio_keys_device,
+	&visstrim_m10_nor_mtd_device,
+};
+
+/* Visstrim_M10 uses UART0 as console */
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+/* I2C */
+static const struct imxi2c_platform_data visstrim_m10_i2c_data __initconst = {
+	.bitrate = 100000,
+};
+
+static struct pca953x_platform_data visstrim_m10_pca9555_pdata = {
+	.gpio_base = 240, /* After MX27 internal GPIOs */
+	.invert = 0,
+};
+
+static struct i2c_board_info visstrim_m10_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("pca9555", 0x20),
+		.platform_data = &visstrim_m10_pca9555_pdata,
+	},
+};
+
+/* USB OTG */
+static int otg_phy_init(struct platform_device *pdev)
+{
+	gpio_set_value(OTG_PHY_CS_GPIO, 0);
+	return 0;
+}
+
+static struct mxc_usbh_platform_data visstrim_m10_usbotg_pdata = {
+	.init = otg_phy_init,
+	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
+	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
+};
+
+static void __init visstrim_m10_board_init(void)
+{
+	int ret;
+
+	ret = mxc_gpio_setup_multiple_pins(visstrim_m10_pins,
+			ARRAY_SIZE(visstrim_m10_pins), "VISSTRIM_M10");
+	if (ret)
+		pr_err("Failed to setup pins (%d)\n", ret);
+
+	imx27_add_imx_uart0(&uart_pdata);
+
+	i2c_register_board_info(0, visstrim_m10_i2c_devices,
+				ARRAY_SIZE(visstrim_m10_i2c_devices));
+	imx27_add_imx_i2c(0, &visstrim_m10_i2c_data);
+	imx27_add_imx_i2c(1, &visstrim_m10_i2c_data);
+	mxc_register_device(&mxc_sdhc_device0, &visstrim_m10_sdhc_pdata);
+	mxc_register_device(&mxc_otg_host, &visstrim_m10_usbotg_pdata);
+	imx27_add_fec(NULL);
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init visstrim_m10_timer_init(void)
+{
+	mx27_clocks_init((unsigned long)25000000);
+}
+
+static struct sys_timer visstrim_m10_timer = {
+	.init	= visstrim_m10_timer_init,
+};
+
+MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10")
+	.boot_params    = MX27_PHYS_OFFSET + 0x100,
+	.map_io         = mx27_map_io,
+	.init_irq       = mx27_init_irq,
+	.init_machine   = visstrim_m10_board_init,
+	.timer          = &visstrim_m10_timer,
+MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c
index 22a2b5d9121..bbdbc75127d 100644
--- a/arch/arm/mach-imx/mach-imx27lite.c
+++ b/arch/arm/mach-imx/mach-imx27lite.c
@@ -27,7 +27,7 @@
 #include "devices-imx27.h"
 #include "devices.h"
 
-static unsigned int mx27lite_pins[] = {
+static const int mx27lite_pins[] __initconst = {
 	/* UART1 */
 	PE12_PF_UART1_TXD,
 	PE13_PF_UART1_RXD,
@@ -58,16 +58,12 @@ static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static struct platform_device *platform_devices[] __initdata = {
-	&mxc_fec_device,
-};
-
 static void __init mx27lite_init(void)
 {
 	mxc_gpio_setup_multiple_pins(mx27lite_pins, ARRAY_SIZE(mx27lite_pins),
 		"imx27lite");
 	imx27_add_imx_uart0(&uart_pdata);
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+	imx27_add_fec(NULL);
 }
 
 static void __init mx27lite_timer_init(void)
@@ -80,8 +76,6 @@ static struct sys_timer mx27lite_timer = {
 };
 
 MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
-	.phys_io        = MX27_AIPI_BASE_ADDR,
-	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = MX27_PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
 	.init_irq       = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c
index 77a760cfadc..6187ce9ba7d 100644
--- a/arch/arm/mach-imx/mach-mx1ads.c
+++ b/arch/arm/mach-imx/mach-mx1ads.c
@@ -32,7 +32,7 @@
 #include "devices-imx1.h"
 #include "devices.h"
 
-static int mx1ads_pins[] = {
+static const int mx1ads_pins[] __initconst = {
 	/* UART1 */
 	PC9_PF_UART1_CTS,
 	PC10_PF_UART1_RTS,
@@ -131,7 +131,7 @@ static void __init mx1ads_init(void)
 	i2c_register_board_info(0, mx1ads_i2c_devices,
 				ARRAY_SIZE(mx1ads_i2c_devices));
 
-	imx1_add_i2c_imx(&mx1ads_i2c_data);
+	imx1_add_imx_i2c(&mx1ads_i2c_data);
 }
 
 static void __init mx1ads_timer_init(void)
@@ -145,8 +145,6 @@ struct sys_timer mx1ads_timer = {
 
 MACHINE_START(MX1ADS, "Freescale MX1ADS")
 	/* Maintainer: Sascha Hauer, Pengutronix */
-	.phys_io	= MX1_IO_BASE_ADDR,
-	.io_pg_offst	= (MX1_IO_BASE_ADDR_VIRT >> 18) & 0xfffc,
 	.boot_params	= MX1_PHYS_OFFSET + 0x100,
 	.map_io		= mx1_map_io,
 	.init_irq	= mx1_init_irq,
@@ -155,8 +153,6 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS")
 MACHINE_END
 
 MACHINE_START(MXLADS, "Freescale MXLADS")
-	.phys_io	= MX1_IO_BASE_ADDR,
-	.io_pg_offst	= (MX1_IO_BASE_ADDR_VIRT >> 18) & 0xfffc,
 	.boot_params	= MX1_PHYS_OFFSET + 0x100,
 	.map_io		= mx1_map_io,
 	.init_irq	= mx1_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index 96d7f8189f3..e1282e9f50f 100644
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -67,7 +67,7 @@
 #define MX21ADS_IO_LED4_ON      0x4000
 #define MX21ADS_IO_LED3_ON      0x8000
 
-static unsigned int mx21ads_pins[] = {
+static const int mx21ads_pins[] __initconst = {
 
 	/* CS8900A */
 	(GPIO_PORTE | GPIO_GPIO | GPIO_IN | 11),
@@ -314,8 +314,6 @@ static struct sys_timer mx21ads_timer = {
 
 MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
 	/* maintainer: Freescale Semiconductor, Inc. */
-	.phys_io        = MX21_AIPI_BASE_ADDR,
-	.io_pg_offst    = ((MX21_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = MX21_PHYS_OFFSET + 0x100,
 	.map_io         = mx21ads_map_io,
 	.init_irq       = mx21_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index e66ffaa1c26..b8bbd31aa85 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -33,7 +33,7 @@
 #include "devices-imx27.h"
 #include "devices.h"
 
-static unsigned int mx27pdk_pins[] = {
+static const int mx27pdk_pins[] __initconst = {
 	/* UART1 */
 	PE12_PF_UART1_TXD,
 	PE13_PF_UART1_RXD,
@@ -64,10 +64,6 @@ static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static struct platform_device *platform_devices[] __initdata = {
-	&mxc_fec_device,
-};
-
 /*
  * Matrix keyboard
  */
@@ -94,7 +90,7 @@ static void __init mx27pdk_init(void)
 	mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
 		"mx27pdk");
 	imx27_add_imx_uart0(&uart_pdata);
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+	imx27_add_fec(NULL);
 	mxc_register_device(&imx_kpp_device, &mx27_3ds_keymap_data);
 }
 
@@ -109,8 +105,6 @@ static struct sys_timer mx27pdk_timer = {
 
 MACHINE_START(MX27_3DS, "Freescale MX27PDK")
 	/* maintainer: Freescale Semiconductor, Inc. */
-	.phys_io        = MX27_AIPI_BASE_ADDR,
-	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = MX27_PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
 	.init_irq       = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
index 9c77da98a10..a1e4bc573af 100644
--- a/arch/arm/mach-imx/mach-mx27ads.c
+++ b/arch/arm/mach-imx/mach-mx27ads.c
@@ -66,7 +66,7 @@
 /* to determine the correct external crystal reference */
 #define CKIH_27MHZ_BIT_SET      (1 << 3)
 
-static unsigned int mx27ads_pins[] = {
+static const int mx27ads_pins[] __initconst = {
 	/* UART0 */
 	PE12_PF_UART1_TXD,
 	PE13_PF_UART1_RXD,
@@ -284,7 +284,6 @@ static struct imxmmc_platform_data sdhc2_pdata = {
 
 static struct platform_device *platform_devices[] __initdata = {
 	&mx27ads_nor_mtd_device,
-	&mxc_fec_device,
 	&mxc_w1_master_device,
 };
 
@@ -308,11 +307,12 @@ static void __init mx27ads_board_init(void)
 	/* only the i2c master 1 is used on this CPU card */
 	i2c_register_board_info(1, mx27ads_i2c_devices,
 				ARRAY_SIZE(mx27ads_i2c_devices));
-	imx27_add_i2c_imx1(&mx27ads_i2c1_data);
+	imx27_add_imx_i2c(1, &mx27ads_i2c1_data);
 	mxc_register_device(&mxc_fb_device, &mx27ads_fb_data);
 	mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
 	mxc_register_device(&mxc_sdhc_device1, &sdhc2_pdata);
 
+	imx27_add_fec(NULL);
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 }
 
@@ -347,8 +347,6 @@ static void __init mx27ads_map_io(void)
 
 MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
 	/* maintainer: Freescale Semiconductor, Inc. */
-	.phys_io        = MX27_AIPI_BASE_ADDR,
-	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = MX27_PHYS_OFFSET + 0x100,
 	.map_io         = mx27ads_map_io,
 	.init_irq       = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c
index a3a1e452d4c..38d3a4ae17c 100644
--- a/arch/arm/mach-imx/mach-mxt_td60.c
+++ b/arch/arm/mach-imx/mach-mxt_td60.c
@@ -37,7 +37,7 @@
 #include "devices-imx27.h"
 #include "devices.h"
 
-static unsigned int mxt_td60_pins[] __initdata = {
+static const int mxt_td60_pins[] __initconst = {
 	/* UART0 */
 	PE12_PF_UART1_TXD,
 	PE13_PF_UART1_RXD,
@@ -231,10 +231,6 @@ static struct imxmmc_platform_data sdhc1_pdata = {
 	.exit = mxt_td60_sdhc1_exit,
 };
 
-static struct platform_device *platform_devices[] __initdata = {
-	&mxc_fec_device,
-};
-
 static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
@@ -255,12 +251,11 @@ static void __init mxt_td60_board_init(void)
 	i2c_register_board_info(1, mxt_td60_i2c2_devices,
 				ARRAY_SIZE(mxt_td60_i2c2_devices));
 
-	imx27_add_i2c_imx0(&mxt_td60_i2c0_data);
-	imx27_add_i2c_imx1(&mxt_td60_i2c1_data);
+	imx27_add_imx_i2c(0, &mxt_td60_i2c0_data);
+	imx27_add_imx_i2c(1, &mxt_td60_i2c1_data);
 	mxc_register_device(&mxc_fb_device, &mxt_td60_fb_data);
 	mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
-
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+	imx27_add_fec(NULL);
 }
 
 static void __init mxt_td60_timer_init(void)
@@ -274,8 +269,6 @@ static struct sys_timer mxt_td60_timer = {
 
 MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60")
 	/* maintainer: Maxtrack Industrial */
-	.phys_io	= MX27_AIPI_BASE_ADDR,
-	.io_pg_offst	= ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params	= MX27_PHYS_OFFSET + 0x100,
 	.map_io		= mx27_map_io,
 	.init_irq	= mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index 23c9e1f37b9..8c720d44602 100644
--- a/arch/arm/mach-imx/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -38,7 +38,6 @@
 #include <mach/iomux-mx27.h>
 #include <asm/mach/time.h>
 #include <mach/audmux.h>
-#include <mach/ssi.h>
 #include <mach/mxc_nand.h>
 #include <mach/irqs.h>
 #include <mach/mmc.h>
@@ -55,7 +54,7 @@
 #define SPI1_SS1 (GPIO_PORTD + 27)
 #define SD2_CD (GPIO_PORTC + 29)
 
-static int pca100_pins[] = {
+static const int pca100_pins[] __initconst = {
 	/* UART1 */
 	PE12_PF_UART1_TXD,
 	PE13_PF_UART1_RXD,
@@ -174,7 +173,6 @@ pca100_nand_board_info __initconst = {
 
 static struct platform_device *platform_devices[] __initdata = {
 	&mxc_w1_master_device,
-	&mxc_fec_device,
 	&mxc_wdt,
 };
 
@@ -193,11 +191,9 @@ static struct i2c_board_info pca100_i2c_devices[] = {
 		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
 		.platform_data = &board_eeprom,
 	}, {
-		I2C_BOARD_INFO("rtc-pcf8563", 0x51),
-		.type = "pcf8563"
+		I2C_BOARD_INFO("pcf8563", 0x51),
 	}, {
 		I2C_BOARD_INFO("lm75", 0x4a),
-		.type = "lm75"
 	}
 };
 
@@ -252,7 +248,7 @@ static void pca100_ac97_cold_reset(struct snd_ac97 *ac97)
 	msleep(2);
 }
 
-static struct imx_ssi_platform_data pca100_ssi_pdata = {
+static const struct imx_ssi_platform_data pca100_ssi_pdata __initconst = {
 	.ac97_reset		= pca100_ac97_cold_reset,
 	.ac97_warm_reset	= pca100_ac97_warm_reset,
 	.flags			= IMX_SSI_USE_AC97,
@@ -389,7 +385,7 @@ static void __init pca100_init(void)
 	if (ret)
 		printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret);
 
-	mxc_register_device(&imx_ssi_device0, &pca100_ssi_pdata);
+	imx27_add_imx_ssi(0, &pca100_ssi_pdata);
 
 	imx27_add_imx_uart0(&uart_pdata);
 
@@ -401,7 +397,7 @@ static void __init pca100_init(void)
 	i2c_register_board_info(1, pca100_i2c_devices,
 				ARRAY_SIZE(pca100_i2c_devices));
 
-	imx27_add_i2c_imx1(&pca100_i2c1_data);
+	imx27_add_imx_i2c(1, &pca100_i2c1_data);
 
 #if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
 	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_IN);
@@ -436,6 +432,7 @@ static void __init pca100_init(void)
 
 	mxc_register_device(&mxc_fb_device, &pca100_fb_data);
 
+	imx27_add_fec(NULL);
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 }
 
@@ -449,8 +446,6 @@ static struct sys_timer pca100_timer = {
 };
 
 MACHINE_START(PCA100, "phyCARD-i.MX27")
-	.phys_io        = MX27_AIPI_BASE_ADDR,
-	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = MX27_PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
 	.init_irq       = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
index 9212e8f3700..49a97ce0742 100644
--- a/arch/arm/mach-imx/mach-pcm038.c
+++ b/arch/arm/mach-imx/mach-pcm038.c
@@ -43,7 +43,7 @@
 #include "devices-imx27.h"
 #include "devices.h"
 
-static int pcm038_pins[] = {
+static const int pcm038_pins[] __initconst = {
 	/* UART1 */
 	PE12_PF_UART1_TXD,
 	PE13_PF_UART1_RXD,
@@ -173,7 +173,6 @@ pcm038_nand_board_info __initconst = {
 static struct platform_device *platform_devices[] __initdata = {
 	&pcm038_nor_mtd_device,
 	&mxc_w1_master_device,
-	&mxc_fec_device,
 	&pcm038_sram_mtd_device,
 	&mxc_wdt,
 };
@@ -257,7 +256,7 @@ static struct regulator_init_data cam_data = {
 	.consumer_supplies = cam_consumers,
 };
 
-struct mc13783_regulator_init_data pcm038_regulators[] = {
+static struct mc13783_regulator_init_data pcm038_regulators[] = {
 	{
 		.id = MC13783_REGU_VCAM,
 		.init_data = &cam_data,
@@ -309,7 +308,7 @@ static void __init pcm038_init(void)
 	i2c_register_board_info(1, pcm038_i2c_devices,
 				ARRAY_SIZE(pcm038_i2c_devices));
 
-	imx27_add_i2c_imx1(&pcm038_i2c1_data);
+	imx27_add_imx_i2c(1, &pcm038_i2c1_data);
 
 	/* PE18 for user-LED D40 */
 	mxc_gpio_mode(GPIO_PORTE | 18 | GPIO_GPIO | GPIO_OUT);
@@ -325,6 +324,7 @@ static void __init pcm038_init(void)
 
 	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
 
+	imx27_add_fec(NULL);
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
 #ifdef CONFIG_MACH_PCM970_BASEBOARD
@@ -342,8 +342,6 @@ static struct sys_timer pcm038_timer = {
 };
 
 MACHINE_START(PCM038, "phyCORE-i.MX27")
-	.phys_io        = MX27_AIPI_BASE_ADDR,
-	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = MX27_PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
 	.init_irq       = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c
index 88bf0d1e26e..1fbdd3faa7a 100644
--- a/arch/arm/mach-imx/mach-scb9328.c
+++ b/arch/arm/mach-imx/mach-scb9328.c
@@ -95,7 +95,7 @@ static struct platform_device dm9000x_device = {
 	}
 };
 
-static int mxc_uart1_pins[] = {
+static const int mxc_uart1_pins[] = {
 	PC9_PF_UART1_CTS,
 	PC10_PF_UART1_RTS,
 	PC11_PF_UART1_TXD,
@@ -147,8 +147,6 @@ static struct sys_timer scb9328_timer = {
 
 MACHINE_START(SCB9328, "Synertronixx scb9328")
     /* Sascha Hauer */
-	.phys_io	= 0x00200000,
-	.io_pg_offst	= ((0xe0200000) >> 18) & 0xfffc,
 	.boot_params	= 0x08000100,
 	.map_io		= mx1_map_io,
 	.init_irq	= mx1_init_irq,
diff --git a/arch/arm/mach-imx/pcm970-baseboard.c b/arch/arm/mach-imx/pcm970-baseboard.c
index f490a406d57..9110d9cca7a 100644
--- a/arch/arm/mach-imx/pcm970-baseboard.c
+++ b/arch/arm/mach-imx/pcm970-baseboard.c
@@ -31,7 +31,7 @@
 
 #include "devices.h"
 
-static int pcm970_pins[] = {
+static const int pcm970_pins[] __initconst = {
 	/* SDHC */
 	PB4_PF_SD2_D0,
 	PB5_PF_SD2_D1,
@@ -200,7 +200,7 @@ static struct resource pcm970_sja1000_resources[] = {
 	},
 };
 
-struct sja1000_platform_data pcm970_sja1000_platform_data = {
+static struct sja1000_platform_data pcm970_sja1000_platform_data = {
 	.osc_freq	= 16000000,
 	.ocr		= OCR_TX1_PULLDOWN | OCR_TX0_PUSHPULL,
 	.cdr		= CDR_CBP,
diff --git a/arch/arm/mach-integrator/include/mach/debug-macro.S b/arch/arm/mach-integrator/include/mach/debug-macro.S
index 87a6888ae01..a1f598fd3a5 100644
--- a/arch/arm/mach-integrator/include/mach/debug-macro.S
+++ b/arch/arm/mach-integrator/include/mach/debug-macro.S
@@ -11,12 +11,10 @@
  *
 */
 
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x16000000	@ physical base address
-		movne	\rx, #0xf0000000	@ virtual base
-		addne	\rx, \rx, #0x16000000 >> 4
+		.macro	addruart, rp, rv
+		mov	\rp, #0x16000000	@ physical base address
+		mov	\rv, #0xf0000000	@ virtual base
+		add	\rv, \rv, #0x16000000 >> 4
 		.endm
 
 #include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-integrator/include/mach/vmalloc.h b/arch/arm/mach-integrator/include/mach/vmalloc.h
index e87ab0b37bd..e056e7cf564 100644
--- a/arch/arm/mach-integrator/include/mach/vmalloc.h
+++ b/arch/arm/mach-integrator/include/mach/vmalloc.h
@@ -17,4 +17,4 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
+#define VMALLOC_END       0xd0000000
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 6ab5a03ab9d..548208f1117 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -500,8 +500,6 @@ static struct sys_timer ap_timer = {
 
 MACHINE_START(INTEGRATOR, "ARM-Integrator")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.phys_io	= 0x16000000,
-	.io_pg_offst	= ((0xf1600000) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.map_io		= ap_map_io,
 	.reserve	= integrator_reserve,
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 05db40e3c4f..6258c90d020 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -599,8 +599,6 @@ static struct sys_timer cp_timer = {
 
 MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.phys_io	= 0x16000000,
-	.io_pg_offst	= ((0xf1600000) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.map_io		= intcp_map_io,
 	.reserve	= integrator_reserve,
diff --git a/arch/arm/mach-iop13xx/include/mach/debug-macro.S b/arch/arm/mach-iop13xx/include/mach/debug-macro.S
index c9d6ba46963..e664466d51b 100644
--- a/arch/arm/mach-iop13xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-iop13xx/include/mach/debug-macro.S
@@ -11,15 +11,13 @@
  * published by the Free Software Foundation.
  */
 
-	.macro	addruart, rx, tmp
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1			@ mmu enabled?
-	moveq	\rx, #0xff000000	@ physical
-	orreq	\rx, \rx, #0x00d80000
-	movne	\rx, #0xfe000000	@ virtual
-	orrne	\rx, \rx, #0x00e80000
-	orr	\rx, \rx, #0x00002300
-	orr	\rx, \rx, #0x00000040
+	.macro	addruart, rp, rv
+	mov	\rp, #0x00002300
+	orr	\rp, \rp, #0x00000040
+	orr	\rv, \rp, #0xfe000000	@ virtual
+	orr	\rv, \rv, #0x00e80000
+	orr	\rp, \rp, #0xff000000	@ physical
+	orr	\rp, \rp, #0x00d80000
 	.endm
 
 #define UART_SHIFT	2
diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c
index f91f3154577..9b5a63f5d07 100644
--- a/arch/arm/mach-iop13xx/iq81340mc.c
+++ b/arch/arm/mach-iop13xx/iq81340mc.c
@@ -91,8 +91,6 @@ static struct sys_timer iq81340mc_timer = {
 
 MACHINE_START(IQ81340MC, "Intel IQ81340MC")
 	/* Maintainer: Dan Williams <dan.j.williams@intel.com> */
-	.phys_io        = IOP13XX_PMMR_PHYS_MEM_BASE,
-	.io_pg_offst    = (IOP13XX_PMMR_VIRT_MEM_BASE >> 18) & 0xfffc,
 	.boot_params    = 0x00000100,
 	.map_io         = iop13xx_map_io,
 	.init_irq       = iop13xx_init_irq,
diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c
index ddb7a3435de..df3492a9c28 100644
--- a/arch/arm/mach-iop13xx/iq81340sc.c
+++ b/arch/arm/mach-iop13xx/iq81340sc.c
@@ -93,8 +93,6 @@ static struct sys_timer iq81340sc_timer = {
 
 MACHINE_START(IQ81340SC, "Intel IQ81340SC")
 	/* Maintainer: Dan Williams <dan.j.williams@intel.com> */
-	.phys_io	= IOP13XX_PMMR_PHYS_MEM_BASE,
-	.io_pg_offst	= (IOP13XX_PMMR_VIRT_MEM_BASE >> 18) & 0xfffc,
 	.boot_params    = 0x00000100,
 	.map_io         = iop13xx_map_io,
 	.init_irq       = iop13xx_init_irq,
diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c
index 2bef9b6e1cc..779f924af30 100644
--- a/arch/arm/mach-iop32x/em7210.c
+++ b/arch/arm/mach-iop32x/em7210.c
@@ -203,8 +203,6 @@ static void __init em7210_init_machine(void)
 }
 
 MACHINE_START(EM7210, "Lanner EM7210")
-	.phys_io	= IQ31244_UART,
-	.io_pg_offst	= ((IQ31244_UART) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
 	.map_io		= em7210_map_io,
 	.init_irq	= iop32x_init_irq,
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
index 10384fc37cb..c6b6f9c5650 100644
--- a/arch/arm/mach-iop32x/glantank.c
+++ b/arch/arm/mach-iop32x/glantank.c
@@ -207,8 +207,6 @@ static void __init glantank_init_machine(void)
 
 MACHINE_START(GLANTANK, "GLAN Tank")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.phys_io	= GLANTANK_UART,
-	.io_pg_offst	= ((GLANTANK_UART) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
 	.map_io		= glantank_map_io,
 	.init_irq	= iop32x_init_irq,
diff --git a/arch/arm/mach-iop32x/include/mach/debug-macro.S b/arch/arm/mach-iop32x/include/mach/debug-macro.S
index 736afe1edd1..ff9e76c09f3 100644
--- a/arch/arm/mach-iop32x/include/mach/debug-macro.S
+++ b/arch/arm/mach-iop32x/include/mach/debug-macro.S
@@ -11,9 +11,10 @@
  * published by the Free Software Foundation.
  */
 
-		.macro	addruart, rx, tmp
-		mov	\rx, #0xfe000000	@ physical as well as virtual
-		orr	\rx, \rx, #0x00800000	@ location of the UART
+		.macro	addruart, rp, rv
+		mov	\rp, #0xfe000000	@ physical as well as virtual
+		orr	\rp, \rp, #0x00800000	@ location of the UART
+		mov	\rv, \rp
 		.endm
 
 #define UART_SHIFT	0
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
index d6ac85ff109..fde962c057f 100644
--- a/arch/arm/mach-iop32x/iq31244.c
+++ b/arch/arm/mach-iop32x/iq31244.c
@@ -313,8 +313,6 @@ __setup("force_ep80219", force_ep80219_setup);
 
 MACHINE_START(IQ31244, "Intel IQ31244")
 	/* Maintainer: Intel Corp. */
-	.phys_io	= IQ31244_UART,
-	.io_pg_offst	= ((IQ31244_UART) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
 	.map_io		= iq31244_map_io,
 	.init_irq	= iop32x_init_irq,
@@ -329,8 +327,6 @@ MACHINE_END
  */
 MACHINE_START(EP80219, "Intel EP80219")
 	/* Maintainer: Intel Corp. */
-	.phys_io	= IQ31244_UART,
-	.io_pg_offst	= ((IQ31244_UART) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
 	.map_io		= iq31244_map_io,
 	.init_irq	= iop32x_init_irq,
diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c
index c6a0e4ee9d9..3a95950e873 100644
--- a/arch/arm/mach-iop32x/iq80321.c
+++ b/arch/arm/mach-iop32x/iq80321.c
@@ -186,8 +186,6 @@ static void __init iq80321_init_machine(void)
 
 MACHINE_START(IQ80321, "Intel IQ80321")
 	/* Maintainer: Intel Corp. */
-	.phys_io	= IQ80321_UART,
-	.io_pg_offst	= ((IQ80321_UART) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
 	.map_io		= iq80321_map_io,
 	.init_irq	= iop32x_init_irq,
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index f108a31afc2..626aa375915 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -327,8 +327,6 @@ static void __init n2100_init_machine(void)
 
 MACHINE_START(N2100, "Thecus N2100")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.phys_io	= N2100_UART,
-	.io_pg_offst	= ((N2100_UART) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
 	.map_io		= n2100_map_io,
 	.init_irq	= iop32x_init_irq,
diff --git a/arch/arm/mach-iop33x/include/mach/debug-macro.S b/arch/arm/mach-iop33x/include/mach/debug-macro.S
index addb2da7842..40c500dd1fa 100644
--- a/arch/arm/mach-iop33x/include/mach/debug-macro.S
+++ b/arch/arm/mach-iop33x/include/mach/debug-macro.S
@@ -11,13 +11,11 @@
  * published by the Free Software Foundation.
  */
 
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ mmu enabled?
-		moveq	\rx, #0xff000000	@ physical
-		movne	\rx, #0xfe000000	@ virtual
-		orr	\rx, \rx, #0x00ff0000
-		orr	\rx, \rx, #0x0000f700
+		.macro	addruart, rp, rv
+		mov	\rp, #0x00ff0000
+		orr	\rp, \rp, #0x0000f700
+		orr	\rv, #0xfe000000	@ virtual
+		orr	\rp, #0xff000000	@ physical
 		.endm
 
 #define UART_SHIFT	2
diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c
index c6ff5523b38..c565f8d1e3a 100644
--- a/arch/arm/mach-iop33x/iq80331.c
+++ b/arch/arm/mach-iop33x/iq80331.c
@@ -141,8 +141,6 @@ static void __init iq80331_init_machine(void)
 
 MACHINE_START(IQ80331, "Intel IQ80331")
 	/* Maintainer: Intel Corp. */
-	.phys_io	= 0xfefff000,
-	.io_pg_offst	= ((0xfffff000) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.map_io		= iop3xx_map_io,
 	.init_irq	= iop33x_init_irq,
diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c
index fbf55140939..36a9efb254c 100644
--- a/arch/arm/mach-iop33x/iq80332.c
+++ b/arch/arm/mach-iop33x/iq80332.c
@@ -141,8 +141,6 @@ static void __init iq80332_init_machine(void)
 
 MACHINE_START(IQ80332, "Intel IQ80332")
 	/* Maintainer: Intel Corp. */
-	.phys_io	= 0xfefff000,
-	.io_pg_offst	= ((0xfffff000) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.map_io		= iop3xx_map_io,
 	.init_irq	= iop33x_init_irq,
diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c
index 1a557e0d055..88663ab1d2a 100644
--- a/arch/arm/mach-ixp2000/enp2611.c
+++ b/arch/arm/mach-ixp2000/enp2611.c
@@ -253,8 +253,6 @@ static void __init enp2611_init_machine(void)
 
 MACHINE_START(ENP2611, "Radisys ENP-2611 PCI network processor board")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.phys_io	= IXP2000_UART_PHYS_BASE,
-	.io_pg_offst	= ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.map_io		= enp2611_map_io,
 	.init_irq	= ixp2000_init_irq,
diff --git a/arch/arm/mach-ixp2000/include/mach/debug-macro.S b/arch/arm/mach-ixp2000/include/mach/debug-macro.S
index 6a827681680..0ef533b2097 100644
--- a/arch/arm/mach-ixp2000/include/mach/debug-macro.S
+++ b/arch/arm/mach-ixp2000/include/mach/debug-macro.S
@@ -11,16 +11,14 @@
  *
 */
 
-		.macro  addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0xc0000000	@ Physical base
-		movne	\rx, #0xfe000000	@ virtual base
-		orrne	\rx, \rx, #0x00f00000
-		orr	\rx, \rx, #0x00030000
+		.macro  addruart, rp, rv
+		mov	\rp, #0x00030000
 #ifdef	__ARMEB__
-		orr	\rx, \rx, #0x00000003
+		orr	\rp, \rp, #0x00000003
 #endif
+		orr	\rv, \rp, #0xfe000000	@ virtual base
+		orr	\rv, \rv, #0x00f00000
+		orr	\rp, \rp, #0xc0000000	@ Physical base
 		.endm
 
 #define UART_SHIFT	2
diff --git a/arch/arm/mach-ixp2000/ixdp2400.c b/arch/arm/mach-ixp2000/ixdp2400.c
index 55e5c69352a..dfffc1e817f 100644
--- a/arch/arm/mach-ixp2000/ixdp2400.c
+++ b/arch/arm/mach-ixp2000/ixdp2400.c
@@ -170,8 +170,6 @@ void __init ixdp2400_init_irq(void)
 
 MACHINE_START(IXDP2400, "Intel IXDP2400 Development Platform")
 	/* Maintainer: MontaVista Software, Inc. */
-	.phys_io	= IXP2000_UART_PHYS_BASE,
-	.io_pg_offst	= ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.map_io		= ixdp2x00_map_io,
 	.init_irq	= ixdp2400_init_irq,
diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c
index 237b61a85e9..cd4c9bcff2b 100644
--- a/arch/arm/mach-ixp2000/ixdp2800.c
+++ b/arch/arm/mach-ixp2000/ixdp2800.c
@@ -285,8 +285,6 @@ void __init ixdp2800_init_irq(void)
 
 MACHINE_START(IXDP2800, "Intel IXDP2800 Development Platform")
 	/* Maintainer: MontaVista Software, Inc. */
-	.phys_io	= IXP2000_UART_PHYS_BASE,
-	.io_pg_offst	= ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.map_io		= ixdp2x00_map_io,
 	.init_irq	= ixdp2800_init_irq,
diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c
index 0369ec4242a..6c121bdbe31 100644
--- a/arch/arm/mach-ixp2000/ixdp2x01.c
+++ b/arch/arm/mach-ixp2000/ixdp2x01.c
@@ -416,8 +416,6 @@ static void __init ixdp2x01_init_machine(void)
 #ifdef CONFIG_ARCH_IXDP2401
 MACHINE_START(IXDP2401, "Intel IXDP2401 Development Platform")
 	/* Maintainer: MontaVista Software, Inc. */
-	.phys_io	= IXP2000_UART_PHYS_BASE,
-	.io_pg_offst	= ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.map_io		= ixdp2x01_map_io,
 	.init_irq	= ixdp2x01_init_irq,
@@ -429,8 +427,6 @@ MACHINE_END
 #ifdef CONFIG_ARCH_IXDP2801
 MACHINE_START(IXDP2801, "Intel IXDP2801 Development Platform")
 	/* Maintainer: MontaVista Software, Inc. */
-	.phys_io	= IXP2000_UART_PHYS_BASE,
-	.io_pg_offst	= ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.map_io		= ixdp2x01_map_io,
 	.init_irq	= ixdp2x01_init_irq,
@@ -444,8 +440,6 @@ MACHINE_END
  */
 MACHINE_START(IXDP28X5, "Intel IXDP2805/2855 Development Platform")
 	/* Maintainer: MontaVista Software, Inc. */
-	.phys_io	= IXP2000_UART_PHYS_BASE,
-	.io_pg_offst	= ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.map_io		= ixdp2x01_map_io,
 	.init_irq	= ixdp2x01_init_irq,
diff --git a/arch/arm/mach-ixp23xx/espresso.c b/arch/arm/mach-ixp23xx/espresso.c
index 1c06bfc5a7e..e25e5fe183b 100644
--- a/arch/arm/mach-ixp23xx/espresso.c
+++ b/arch/arm/mach-ixp23xx/espresso.c
@@ -85,8 +85,6 @@ static void __init espresso_init(void)
 
 MACHINE_START(ESPRESSO, "IP Fabrics Double Espresso")
 	/* Maintainer: Lennert Buytenhek */
-	.phys_io	= IXP23XX_PERIPHERAL_PHYS,
-	.io_pg_offst	= ((IXP23XX_PERIPHERAL_VIRT >> 18)) & 0xfffc,
 	.map_io		= ixp23xx_map_io,
 	.init_irq	= ixp23xx_init_irq,
 	.timer		= &ixp23xx_timer,
diff --git a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
index a82e375465e..f7c6eef7fa2 100644
--- a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
@@ -12,13 +12,12 @@
  */
 #include <mach/ixp23xx.h>
 
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1				@ mmu enabled?
-		ldreq	\rx, =IXP23XX_PERIPHERAL_PHYS 	@ physical
-		ldrne	\rx, =IXP23XX_PERIPHERAL_VIRT	@ virtual
+		.macro	addruart, rp, rv
+		ldr	\rp, =IXP23XX_PERIPHERAL_PHYS 	@ physical
+		ldr	\rv, =IXP23XX_PERIPHERAL_VIRT	@ virtual
 #ifdef __ARMEB__
-		orr	\rx, \rx, #0x00000003
+		orr	\rp, \rp, #0x00000003
+		orr	\rv, \rv, #0x00000003
 #endif
 		.endm
 
diff --git a/arch/arm/mach-ixp23xx/ixdp2351.c b/arch/arm/mach-ixp23xx/ixdp2351.c
index f1b124a709a..664e39c2a90 100644
--- a/arch/arm/mach-ixp23xx/ixdp2351.c
+++ b/arch/arm/mach-ixp23xx/ixdp2351.c
@@ -328,8 +328,6 @@ static void __init ixdp2351_init(void)
 
 MACHINE_START(IXDP2351, "Intel IXDP2351 Development Platform")
 	/* Maintainer: MontaVista Software, Inc. */
-	.phys_io	= IXP23XX_PERIPHERAL_PHYS,
-	.io_pg_offst	= ((IXP23XX_PERIPHERAL_VIRT >> 18)) & 0xfffc,
 	.map_io		= ixdp2351_map_io,
 	.init_irq	= ixdp2351_init_irq,
 	.timer		= &ixp23xx_timer,
diff --git a/arch/arm/mach-ixp23xx/roadrunner.c b/arch/arm/mach-ixp23xx/roadrunner.c
index 6d38d769761..76c61ba7321 100644
--- a/arch/arm/mach-ixp23xx/roadrunner.c
+++ b/arch/arm/mach-ixp23xx/roadrunner.c
@@ -171,8 +171,6 @@ static void __init roadrunner_init(void)
 
 MACHINE_START(ROADRUNNER, "ADI Engineering RoadRunner Development Platform")
 	/* Maintainer: Deepak Saxena */
-	.phys_io	= IXP23XX_PERIPHERAL_PHYS,
-	.io_pg_offst	= ((IXP23XX_PERIPHERAL_VIRT >> 18)) & 0xfffc,
 	.map_io		= ixp23xx_map_io,
 	.init_irq	= ixp23xx_init_irq,
 	.timer		= &ixp23xx_timer,
diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c
index d8bc86d76f1..73745ff102d 100644
--- a/arch/arm/mach-ixp4xx/avila-setup.c
+++ b/arch/arm/mach-ixp4xx/avila-setup.c
@@ -164,8 +164,6 @@ static void __init avila_init(void)
 
 MACHINE_START(AVILA, "Gateworks Avila Network Platform")
 	/* Maintainer: Deepak Saxena <dsaxena@plexity.net> */
-	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
-	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
@@ -181,8 +179,6 @@ MACHINE_END
 #ifdef CONFIG_MACH_LOFT
 MACHINE_START(LOFT, "Giant Shoulder Inc Loft board")
 	/* Maintainer: Tom Billman <kernel@giantshoulderinc.com> */
-	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
-	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c
index 31a47f6a893..355e3de3873 100644
--- a/arch/arm/mach-ixp4xx/coyote-setup.c
+++ b/arch/arm/mach-ixp4xx/coyote-setup.c
@@ -109,8 +109,6 @@ static void __init coyote_init(void)
 #ifdef CONFIG_ARCH_ADI_COYOTE
 MACHINE_START(ADI_COYOTE, "ADI Engineering Coyote")
 	/* Maintainer: MontaVista Software, Inc. */
-	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
-	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
@@ -126,8 +124,6 @@ MACHINE_END
 #ifdef CONFIG_MACH_IXDPG425
 MACHINE_START(IXDPG425, "Intel IXDPG425")
 	/* Maintainer: MontaVista Software, Inc. */
-	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
-	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c
index 7c1fa54a614..d398229cfaa 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-setup.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c
@@ -279,8 +279,6 @@ static void __init dsmg600_init(void)
 
 MACHINE_START(DSMG600, "D-Link DSM-G600 RevA")
 	/* Maintainer: www.nslu2-linux.org */
-	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
-	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c
index e7f4befba42..727ee39ce11 100644
--- a/arch/arm/mach-ixp4xx/fsg-setup.c
+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
@@ -270,8 +270,6 @@ static void __init fsg_init(void)
 
 MACHINE_START(FSG, "Freecom FSG-3")
 	/* Maintainer: www.nslu2-linux.org */
-	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
-	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
diff --git a/arch/arm/mach-ixp4xx/gateway7001-setup.c b/arch/arm/mach-ixp4xx/gateway7001-setup.c
index 2583b2a1317..9dc0b4eaa65 100644
--- a/arch/arm/mach-ixp4xx/gateway7001-setup.c
+++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c
@@ -96,8 +96,6 @@ static void __init gateway7001_init(void)
 #ifdef CONFIG_MACH_GATEWAY7001
 MACHINE_START(GATEWAY7001, "Gateway 7001 AP")
 	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
-	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c
index 1c28048209c..d0e4861ac03 100644
--- a/arch/arm/mach-ixp4xx/goramo_mlr.c
+++ b/arch/arm/mach-ixp4xx/goramo_mlr.c
@@ -496,8 +496,6 @@ subsys_initcall(gmlr_pci_init);
 
 MACHINE_START(GORAMO_MLR, "MultiLink")
 	/* Maintainer: Krzysztof Halasa */
-	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
-	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
index c67586b7940..77abead3622 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
@@ -164,8 +164,6 @@ static void __init gtwx5715_init(void)
 
 MACHINE_START(GTWX5715, "Gemtek GTWX5715 (Linksys WRV54G)")
 	/* Maintainer: George Joseph */
-	.phys_io	= IXP4XX_UART2_BASE_PHYS,
-	.io_pg_offst	= ((IXP4XX_UART2_BASE_VIRT) >> 18) & 0xfffc,
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
diff --git a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
index 3fc66d6d00a..b974a49c0af 100644
--- a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
@@ -10,16 +10,16 @@
  * published by the Free Software Foundation.
 */
 
-                .macro  addruart, rx, tmp
-                mrc     p15, 0, \rx, c1, c0
-                tst     \rx, #1                 @ MMU enabled?
-                moveq   \rx, #0xc8000000
-                movne   \rx, #0xff000000
-		orrne	\rx, \rx, #0x00b00000
+                .macro  addruart, rp, rv
 #ifdef __ARMEB__
-                add     \rx,\rx,#3              @ Uart regs are at off set of 3 if
-						@ byte writes used - Big Endian.
+                mov     \rp, #3         @ Uart regs are at off set of 3 if
+					@ byte writes used - Big Endian.
+#else
+		mov	\rp, #0
 #endif
+                orr     \rv, \rp, #0xff000000	@ virtual
+		orr	\rv, \rv, #0x00b00000
+                orr     \rp, \rp, #0xc8000000	@ physical
                 .endm
 
 #define UART_SHIFT	2
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index ea9ee4ed0a3..14078338678 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -257,8 +257,6 @@ static void __init ixdp425_init(void)
 #ifdef CONFIG_ARCH_IXDP425
 MACHINE_START(IXDP425, "Intel IXDP425 Development Platform")
 	/* Maintainer: MontaVista Software, Inc. */
-	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
-	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
@@ -270,8 +268,6 @@ MACHINE_END
 #ifdef CONFIG_MACH_IXDP465
 MACHINE_START(IXDP465, "Intel IXDP465 Development Platform")
 	/* Maintainer: MontaVista Software, Inc. */
-	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
-	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
@@ -283,8 +279,6 @@ MACHINE_END
 #ifdef CONFIG_ARCH_PRPMC1100
 MACHINE_START(IXCDP1100, "Intel IXCDP1100 Development Platform")
 	/* Maintainer: MontaVista Software, Inc. */
-	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
-	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
@@ -296,8 +290,6 @@ MACHINE_END
 #ifdef CONFIG_MACH_KIXRP435
 MACHINE_START(KIXRP435, "Intel KIXRP435 Reference Platform")
 	/* Maintainer: MontaVista Software, Inc. */
-	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
-	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
index e3ee880aa1e..f18fee74887 100644
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -314,8 +314,6 @@ static void __init nas100d_init(void)
 
 MACHINE_START(NAS100D, "Iomega NAS 100d")
 	/* Maintainer: www.nslu2-linux.org */
-	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
-	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index c14e0034be4..f79b62eb761 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -300,8 +300,6 @@ static void __init nslu2_init(void)
 
 MACHINE_START(NSLU2, "Linksys NSLU2")
 	/* Maintainer: www.nslu2-linux.org */
-	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
-	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
diff --git a/arch/arm/mach-ixp4xx/vulcan-setup.c b/arch/arm/mach-ixp4xx/vulcan-setup.c
index 465cc5cce68..4e72cfdd3c4 100644
--- a/arch/arm/mach-ixp4xx/vulcan-setup.c
+++ b/arch/arm/mach-ixp4xx/vulcan-setup.c
@@ -236,8 +236,6 @@ static void __init vulcan_init(void)
 
 MACHINE_START(ARCOM_VULCAN, "Arcom/Eurotech Vulcan")
 	/* Maintainer: Marc Zyngier <maz@misterjones.org> */
-	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
-	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
diff --git a/arch/arm/mach-ixp4xx/wg302v2-setup.c b/arch/arm/mach-ixp4xx/wg302v2-setup.c
index 4dd74863daa..5d148c7bc4f 100644
--- a/arch/arm/mach-ixp4xx/wg302v2-setup.c
+++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c
@@ -97,8 +97,6 @@ static void __init wg302v2_init(void)
 #ifdef CONFIG_MACH_WG302V2
 MACHINE_START(WG302V2, "Netgear WG302 v2 / WAG302 v2")
 	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
-	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index cc25501b57f..34106335c72 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -58,6 +58,12 @@ config MACH_TS41X
 	  QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS
 	  devices.
 
+config MACH_DOCKSTAR
+	bool "Seagate FreeAgent DockStar"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Seagate FreeAgent DockStar.
+
 config MACH_OPENRD
         bool
 
@@ -100,6 +106,12 @@ config MACH_NETSPACE_MAX_V2
 	  Say 'Y' here if you want your kernel to support the
 	  LaCie Network Space Max v2 NAS.
 
+config MACH_D2NET_V2
+	bool "LaCie d2 Network v2 NAS Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  LaCie d2 Network v2 NAS.
+
 config MACH_NET2BIG_V2
 	bool "LaCie 2Big Network v2 NAS Board"
 	help
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index 295d7baa6ae..5dcaa81a2ec 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -7,14 +7,16 @@ obj-$(CONFIG_MACH_MV88F6281GTW_GE)	+= mv88f6281gtw_ge-setup.o
 obj-$(CONFIG_MACH_SHEEVAPLUG)		+= sheevaplug-setup.o
 obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG)	+= sheevaplug-setup.o
 obj-$(CONFIG_MACH_GURUPLUG)		+= guruplug-setup.o
+obj-$(CONFIG_MACH_DOCKSTAR)		+= dockstar-setup.o
 obj-$(CONFIG_MACH_TS219)		+= ts219-setup.o tsx1x-common.o
 obj-$(CONFIG_MACH_TS41X)		+= ts41x-setup.o tsx1x-common.o
 obj-$(CONFIG_MACH_OPENRD)		+= openrd-setup.o
-obj-$(CONFIG_MACH_NETSPACE_V2)		+= netspace_v2-setup.o
-obj-$(CONFIG_MACH_INETSPACE_V2)		+= netspace_v2-setup.o
-obj-$(CONFIG_MACH_NETSPACE_MAX_V2)	+= netspace_v2-setup.o
-obj-$(CONFIG_MACH_NET2BIG_V2)		+= netxbig_v2-setup.o
-obj-$(CONFIG_MACH_NET5BIG_V2)		+= netxbig_v2-setup.o
+obj-$(CONFIG_MACH_NETSPACE_V2)		+= netspace_v2-setup.o lacie_v2-common.o
+obj-$(CONFIG_MACH_INETSPACE_V2)		+= netspace_v2-setup.o lacie_v2-common.o
+obj-$(CONFIG_MACH_NETSPACE_MAX_V2)	+= netspace_v2-setup.o lacie_v2-common.o
+obj-$(CONFIG_MACH_D2NET_V2)		+= d2net_v2-setup.o lacie_v2-common.o
+obj-$(CONFIG_MACH_NET2BIG_V2)		+= netxbig_v2-setup.o lacie_v2-common.o
+obj-$(CONFIG_MACH_NET5BIG_V2)		+= netxbig_v2-setup.o lacie_v2-common.o
 obj-$(CONFIG_MACH_T5325)		+= t5325-setup.o
 
 obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
diff --git a/arch/arm/mach-kirkwood/d2net_v2-setup.c b/arch/arm/mach-kirkwood/d2net_v2-setup.c
new file mode 100644
index 00000000000..4aa86e4a152
--- /dev/null
+++ b/arch/arm/mach-kirkwood/d2net_v2-setup.c
@@ -0,0 +1,229 @@
+/*
+ * arch/arm/mach-kirkwood/d2net_v2-setup.c
+ *
+ * LaCie d2 Network Space v2 Board Setup
+ *
+ * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <mach/leds-ns2.h>
+#include "common.h"
+#include "mpp.h"
+#include "lacie_v2-common.h"
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data d2net_v2_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+
+static struct mv_sata_platform_data d2net_v2_sata_data = {
+	.n_ports	= 2,
+};
+
+/*****************************************************************************
+ * GPIO keys
+ ****************************************************************************/
+
+#define D2NET_V2_GPIO_PUSH_BUTTON          34
+#define D2NET_V2_GPIO_POWER_SWITCH_ON      13
+#define D2NET_V2_GPIO_POWER_SWITCH_OFF     15
+
+#define D2NET_V2_SWITCH_POWER_ON           0x1
+#define D2NET_V2_SWITCH_POWER_OFF          0x2
+
+static struct gpio_keys_button d2net_v2_buttons[] = {
+	[0] = {
+		.type           = EV_SW,
+		.code           = D2NET_V2_SWITCH_POWER_ON,
+		.gpio           = D2NET_V2_GPIO_POWER_SWITCH_ON,
+		.desc           = "Back power switch (on|auto)",
+		.active_low     = 0,
+	},
+	[1] = {
+		.type           = EV_SW,
+		.code           = D2NET_V2_SWITCH_POWER_OFF,
+		.gpio           = D2NET_V2_GPIO_POWER_SWITCH_OFF,
+		.desc           = "Back power switch (auto|off)",
+		.active_low     = 0,
+	},
+	[2] = {
+		.code           = KEY_POWER,
+		.gpio           = D2NET_V2_GPIO_PUSH_BUTTON,
+		.desc           = "Front Push Button",
+		.active_low     = 1,
+	},
+};
+
+static struct gpio_keys_platform_data d2net_v2_button_data = {
+	.buttons	= d2net_v2_buttons,
+	.nbuttons	= ARRAY_SIZE(d2net_v2_buttons),
+};
+
+static struct platform_device d2net_v2_gpio_buttons = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &d2net_v2_button_data,
+	},
+};
+
+/*****************************************************************************
+ * GPIO LEDs
+ ****************************************************************************/
+
+#define D2NET_V2_GPIO_RED_LED		12
+
+static struct gpio_led d2net_v2_gpio_led_pins[] = {
+	{
+		.name	= "d2net_v2:red:fail",
+		.gpio	= D2NET_V2_GPIO_RED_LED,
+	},
+};
+
+static struct gpio_led_platform_data d2net_v2_gpio_leds_data = {
+	.num_leds	= ARRAY_SIZE(d2net_v2_gpio_led_pins),
+	.leds		= d2net_v2_gpio_led_pins,
+};
+
+static struct platform_device d2net_v2_gpio_leds = {
+	.name		= "leds-gpio",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &d2net_v2_gpio_leds_data,
+	},
+};
+
+/*****************************************************************************
+ * Dual-GPIO CPLD LEDs
+ ****************************************************************************/
+
+#define D2NET_V2_GPIO_BLUE_LED_SLOW	29
+#define D2NET_V2_GPIO_BLUE_LED_CMD	30
+
+static struct ns2_led d2net_v2_led_pins[] = {
+	{
+		.name	= "d2net_v2:blue:sata",
+		.cmd	= D2NET_V2_GPIO_BLUE_LED_CMD,
+		.slow	= D2NET_V2_GPIO_BLUE_LED_SLOW,
+	},
+};
+
+static struct ns2_led_platform_data d2net_v2_leds_data = {
+	.num_leds	= ARRAY_SIZE(d2net_v2_led_pins),
+	.leds		= d2net_v2_led_pins,
+};
+
+static struct platform_device d2net_v2_leds = {
+	.name		= "leds-ns2",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &d2net_v2_leds_data,
+	},
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+static unsigned int d2net_v2_mpp_config[] __initdata = {
+	MPP0_SPI_SCn,
+	MPP1_SPI_MOSI,
+	MPP2_SPI_SCK,
+	MPP3_SPI_MISO,
+	MPP6_SYSRST_OUTn,
+	MPP7_GPO,		/* Request power-off */
+	MPP8_TW0_SDA,
+	MPP9_TW0_SCK,
+	MPP10_UART0_TXD,
+	MPP11_UART0_RXD,
+	MPP12_GPO,		/* Red led */
+	MPP13_GPIO,		/* Rear power switch (on|auto) */
+	MPP14_GPIO,		/* USB fuse */
+	MPP15_GPIO,		/* Rear power switch (auto|off) */
+	MPP16_GPIO,		/* SATA 0 power */
+	MPP21_SATA0_ACTn,
+	MPP24_GPIO,		/* USB mode select */
+	MPP26_GPIO,		/* USB device vbus */
+	MPP28_GPIO,		/* USB enable host vbus */
+	MPP29_GPIO,		/* Blue led (slow register) */
+	MPP30_GPIO,		/* Blue led (command register) */
+	MPP34_GPIO,		/* Power button (1 = Released, 0 = Pushed) */
+	MPP35_GPIO,		/* Inhibit power-off */
+	0
+};
+
+#define D2NET_V2_GPIO_POWER_OFF		7
+
+static void d2net_v2_power_off(void)
+{
+	gpio_set_value(D2NET_V2_GPIO_POWER_OFF, 1);
+}
+
+static void __init d2net_v2_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	kirkwood_mpp_conf(d2net_v2_mpp_config);
+
+	lacie_v2_hdd_power_init(1);
+
+	kirkwood_ehci_init();
+	kirkwood_ge00_init(&d2net_v2_ge00_data);
+	kirkwood_sata_init(&d2net_v2_sata_data);
+	kirkwood_uart0_init();
+	lacie_v2_register_flash();
+	lacie_v2_register_i2c_devices();
+
+	platform_device_register(&d2net_v2_leds);
+	platform_device_register(&d2net_v2_gpio_leds);
+	platform_device_register(&d2net_v2_gpio_buttons);
+
+	if (gpio_request(D2NET_V2_GPIO_POWER_OFF, "power-off") == 0 &&
+	    gpio_direction_output(D2NET_V2_GPIO_POWER_OFF, 0) == 0)
+		pm_power_off = d2net_v2_power_off;
+	else
+		pr_err("d2net_v2: failed to configure power-off GPIO\n");
+}
+
+MACHINE_START(D2NET_V2, "LaCie d2 Network v2")
+	.boot_params	= 0x00000100,
+	.init_machine	= d2net_v2_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &lacie_v2_timer,
+MACHINE_END
diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
index 16f6691e7c6..9ea71182d31 100644
--- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
@@ -97,8 +97,6 @@ subsys_initcall(db88f6281_pci_init);
 
 MACHINE_START(DB88F6281_BP, "Marvell DB-88F6281-BP Development Board")
 	/* Maintainer: Saeed Bishara <saeed@marvell.com> */
-	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
-	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.init_machine	= db88f6281_init,
 	.map_io		= kirkwood_map_io,
diff --git a/arch/arm/mach-kirkwood/dockstar-setup.c b/arch/arm/mach-kirkwood/dockstar-setup.c
new file mode 100644
index 00000000000..433ea368c06
--- /dev/null
+++ b/arch/arm/mach-kirkwood/dockstar-setup.c
@@ -0,0 +1,110 @@
+/*
+ * arch/arm/mach-kirkwood/dockstar-setup.c
+ *
+ * Seagate FreeAgent DockStar Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <plat/mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition dockstar_nand_parts[] = {
+	{
+		.name = "u-boot",
+		.offset = 0,
+		.size = SZ_1M
+	}, {
+		.name = "uImage",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = SZ_4M
+	}, {
+		.name = "root",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = MTDPART_SIZ_FULL
+	},
+};
+
+static struct mv643xx_eth_platform_data dockstar_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct gpio_led dockstar_led_pins[] = {
+	{
+		.name			= "dockstar:green:health",
+		.default_trigger	= "default-on",
+		.gpio			= 46,
+		.active_low		= 1,
+	},
+	{
+		.name			= "dockstar:orange:misc",
+		.default_trigger	= "none",
+		.gpio			= 47,
+		.active_low		= 1,
+	},
+};
+
+static struct gpio_led_platform_data dockstar_led_data = {
+	.leds		= dockstar_led_pins,
+	.num_leds	= ARRAY_SIZE(dockstar_led_pins),
+};
+
+static struct platform_device dockstar_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &dockstar_led_data,
+	}
+};
+
+static unsigned int dockstar_mpp_config[] __initdata = {
+	MPP29_GPIO,	/* USB Power Enable */
+	MPP46_GPIO,	/* LED green */
+	MPP47_GPIO,	/* LED orange */
+	0
+};
+
+static void __init dockstar_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+
+	/* setup gpio pin select */
+	kirkwood_mpp_conf(dockstar_mpp_config);
+
+	kirkwood_uart0_init();
+	kirkwood_nand_init(ARRAY_AND_SIZE(dockstar_nand_parts), 25);
+
+	if (gpio_request(29, "USB Power Enable") != 0 ||
+	    gpio_direction_output(29, 1) != 0)
+		printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n");
+	kirkwood_ehci_init();
+
+	kirkwood_ge00_init(&dockstar_ge00_data);
+
+	platform_device_register(&dockstar_leds);
+}
+
+MACHINE_START(DOCKSTAR, "Seagate FreeAgent DockStar")
+	.boot_params	= 0x00000100,
+	.init_machine	= dockstar_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+MACHINE_END
diff --git a/arch/arm/mach-kirkwood/guruplug-setup.c b/arch/arm/mach-kirkwood/guruplug-setup.c
index 54d07c89d4f..8f47dc0a2fe 100644
--- a/arch/arm/mach-kirkwood/guruplug-setup.c
+++ b/arch/arm/mach-kirkwood/guruplug-setup.c
@@ -121,8 +121,6 @@ static void __init guruplug_init(void)
 
 MACHINE_START(GURUPLUG, "Marvell GuruPlug Reference Board")
 	/* Maintainer: Siddarth Gore <gores@marvell.com> */
-	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
-	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.init_machine	= guruplug_init,
 	.map_io		= kirkwood_map_io,
diff --git a/arch/arm/mach-kirkwood/include/mach/debug-macro.S b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
index d0606774dea..db06ae437d0 100644
--- a/arch/arm/mach-kirkwood/include/mach/debug-macro.S
+++ b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
@@ -8,12 +8,11 @@
 
 #include <mach/bridge-regs.h>
 
-	.macro	addruart, rx, tmp
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1					@ MMU enabled?
-	ldreq	\rx, =KIRKWOOD_REGS_PHYS_BASE
-	ldrne	\rx, =KIRKWOOD_REGS_VIRT_BASE
-	orr	\rx, \rx, #0x00012000
+	.macro	addruart, rp, rv
+	ldr	\rp, =KIRKWOOD_REGS_PHYS_BASE
+	ldr	\rv, =KIRKWOOD_REGS_VIRT_BASE
+	orr	\rp, \rp, #0x00012000
+	orr	\rv, \rv, #0x00012000
 	.endm
 
 #define UART_SHIFT	2
diff --git a/arch/arm/mach-kirkwood/include/mach/leds-netxbig.h b/arch/arm/mach-kirkwood/include/mach/leds-netxbig.h
new file mode 100644
index 00000000000..24b536ebdf1
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/leds-netxbig.h
@@ -0,0 +1,55 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/leds-netxbig.h
+ *
+ * Platform data structure for netxbig LED driver
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_LEDS_NETXBIG_H
+#define __MACH_LEDS_NETXBIG_H
+
+struct netxbig_gpio_ext {
+	unsigned	*addr;
+	int		num_addr;
+	unsigned	*data;
+	int		num_data;
+	unsigned	enable;
+};
+
+enum netxbig_led_mode {
+	NETXBIG_LED_OFF,
+	NETXBIG_LED_ON,
+	NETXBIG_LED_SATA,
+	NETXBIG_LED_TIMER1,
+	NETXBIG_LED_TIMER2,
+	NETXBIG_LED_MODE_NUM,
+};
+
+#define NETXBIG_LED_INVALID_MODE NETXBIG_LED_MODE_NUM
+
+struct netxbig_led_timer {
+	unsigned long		delay_on;
+	unsigned long		delay_off;
+	enum netxbig_led_mode	mode;
+};
+
+struct netxbig_led {
+	const char	*name;
+	const char	*default_trigger;
+	int		mode_addr;
+	int		*mode_val;
+	int		bright_addr;
+};
+
+struct netxbig_led_platform_data {
+	struct netxbig_gpio_ext	*gpio_ext;
+	struct netxbig_led_timer *timer;
+	int			num_timer;
+	struct netxbig_led	*leds;
+	int			num_leds;
+};
+
+#endif /* __MACH_LEDS_NETXBIG_H */
diff --git a/arch/arm/mach-kirkwood/lacie_v2-common.c b/arch/arm/mach-kirkwood/lacie_v2-common.c
new file mode 100644
index 00000000000..d3ea1b6c8a0
--- /dev/null
+++ b/arch/arm/mach-kirkwood/lacie_v2-common.c
@@ -0,0 +1,127 @@
+/*
+ * arch/arm/mach-kirkwood/lacie_v2-common.c
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/gpio.h>
+#include <asm/mach/time.h>
+#include <mach/kirkwood.h>
+#include <mach/irqs.h>
+#include <plat/time.h>
+#include "common.h"
+
+/*****************************************************************************
+ * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005)
+ ****************************************************************************/
+
+static struct mtd_partition lacie_v2_flash_parts[] = {
+	{
+		.name = "u-boot",
+		.size = MTDPART_SIZ_FULL,
+		.offset = 0,
+		.mask_flags = MTD_WRITEABLE, /* force read-only */
+	},
+};
+
+static const struct flash_platform_data lacie_v2_flash = {
+	.type		= "mx25l4005a",
+	.name		= "spi_flash",
+	.parts		= lacie_v2_flash_parts,
+	.nr_parts	= ARRAY_SIZE(lacie_v2_flash_parts),
+};
+
+static struct spi_board_info __initdata lacie_v2_spi_slave_info[] = {
+	{
+		.modalias	= "m25p80",
+		.platform_data	= &lacie_v2_flash,
+		.irq		= -1,
+		.max_speed_hz	= 20000000,
+		.bus_num	= 0,
+		.chip_select	= 0,
+	},
+};
+
+void __init lacie_v2_register_flash(void)
+{
+	spi_register_board_info(lacie_v2_spi_slave_info,
+				ARRAY_SIZE(lacie_v2_spi_slave_info));
+	kirkwood_spi_init();
+}
+
+/*****************************************************************************
+ * I2C devices
+ ****************************************************************************/
+
+static struct at24_platform_data at24c04 = {
+	.byte_len	= SZ_4K / 8,
+	.page_size	= 16,
+};
+
+/*
+ * i2c addr | chip         | description
+ * 0x50     | HT24LC04     | eeprom (512B)
+ */
+
+static struct i2c_board_info __initdata lacie_v2_i2c_info[] = {
+	{
+		I2C_BOARD_INFO("24c04", 0x50),
+		.platform_data  = &at24c04,
+	}
+};
+
+void __init lacie_v2_register_i2c_devices(void)
+{
+	kirkwood_i2c_init();
+	i2c_register_board_info(0, lacie_v2_i2c_info,
+				ARRAY_SIZE(lacie_v2_i2c_info));
+}
+
+/*****************************************************************************
+ * Hard Disk power
+ ****************************************************************************/
+
+static int __initdata lacie_v2_gpio_hdd_power[] = { 16, 17, 41, 42, 43 };
+
+void __init lacie_v2_hdd_power_init(int hdd_num)
+{
+	int i;
+	int err;
+
+	/* Power up all hard disks. */
+	for (i = 0; i < hdd_num; i++) {
+		err = gpio_request(lacie_v2_gpio_hdd_power[i], NULL);
+		if (err == 0) {
+			err = gpio_direction_output(
+					lacie_v2_gpio_hdd_power[i], 1);
+			/* Free the HDD power GPIOs. This allow user-space to
+			 * configure them via the gpiolib sysfs interface. */
+			gpio_free(lacie_v2_gpio_hdd_power[i]);
+		}
+		if (err)
+			pr_err("Failed to power up HDD%d\n", i + 1);
+	}
+}
+
+/*****************************************************************************
+ * Timer
+ ****************************************************************************/
+
+static void lacie_v2_timer_init(void)
+{
+	kirkwood_tclk = 166666667;
+	orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
+}
+
+struct sys_timer lacie_v2_timer = {
+	.init = lacie_v2_timer_init,
+};
diff --git a/arch/arm/mach-kirkwood/lacie_v2-common.h b/arch/arm/mach-kirkwood/lacie_v2-common.h
new file mode 100644
index 00000000000..af521315b87
--- /dev/null
+++ b/arch/arm/mach-kirkwood/lacie_v2-common.h
@@ -0,0 +1,18 @@
+/*
+ * arch/arm/mach-kirkwood/lacie_v2-common.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ARCH_KIRKWOOD_LACIE_V2_COMMON_H
+#define __ARCH_KIRKWOOD_LACIE_V2_COMMON_H
+
+void lacie_v2_register_flash(void);
+void lacie_v2_register_i2c_devices(void);
+void lacie_v2_hdd_power_init(int hdd_num);
+
+extern struct sys_timer lacie_v2_timer;
+
+#endif
diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
index c6b92b42eb4..1e5266f57e2 100644
--- a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
+++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
@@ -163,8 +163,6 @@ subsys_initcall(mv88f6281gtw_ge_pci_init);
 
 MACHINE_START(MV88F6281GTW_GE, "Marvell 88F6281 GTW GE Board")
 	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
-	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.init_machine	= mv88f6281gtw_ge_init,
 	.map_io		= kirkwood_map_io,
diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c
index d26bf324738..5e286441b8f 100644
--- a/arch/arm/mach-kirkwood/netspace_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c
@@ -24,56 +24,19 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
-#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/leds.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/time.h>
 #include <mach/kirkwood.h>
 #include <mach/leds-ns2.h>
-#include <plat/time.h>
 #include "common.h"
 #include "mpp.h"
-
-/*****************************************************************************
- * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005)
- ****************************************************************************/
-
-static struct mtd_partition netspace_v2_flash_parts[] = {
-	{
-		.name = "u-boot",
-		.size = MTDPART_SIZ_FULL,
-		.offset = 0,
-		.mask_flags = MTD_WRITEABLE, /* force read-only */
-	},
-};
-
-static const struct flash_platform_data netspace_v2_flash = {
-	.type		= "mx25l4005a",
-	.name		= "spi_flash",
-	.parts		= netspace_v2_flash_parts,
-	.nr_parts	= ARRAY_SIZE(netspace_v2_flash_parts),
-};
-
-static struct spi_board_info __initdata netspace_v2_spi_slave_info[] = {
-	{
-		.modalias	= "m25p80",
-		.platform_data	= &netspace_v2_flash,
-		.irq		= -1,
-		.max_speed_hz	= 20000000,
-		.bus_num	= 0,
-		.chip_select	= 0,
-	},
-};
+#include "lacie_v2-common.h"
 
 /*****************************************************************************
  * Ethernet
@@ -84,27 +47,6 @@ static struct mv643xx_eth_platform_data netspace_v2_ge00_data = {
 };
 
 /*****************************************************************************
- * I2C devices
- ****************************************************************************/
-
-static struct at24_platform_data at24c04 = {
-	.byte_len	= SZ_4K / 8,
-	.page_size	= 16,
-};
-
-/*
- * i2c addr | chip         | description
- * 0x50     | HT24LC04     | eeprom (512B)
- */
-
-static struct i2c_board_info __initdata netspace_v2_i2c_info[] = {
-	{
-		I2C_BOARD_INFO("24c04", 0x50),
-		.platform_data  = &at24c04,
-	}
-};
-
-/*****************************************************************************
  * SATA
  ****************************************************************************/
 
@@ -112,35 +54,6 @@ static struct mv_sata_platform_data netspace_v2_sata_data = {
 	.n_ports	= 2,
 };
 
-#define NETSPACE_V2_GPIO_SATA0_POWER	16
-#define NETSPACE_V2_GPIO_SATA1_POWER	17
-
-static void __init netspace_v2_sata_power_init(void)
-{
-	int err;
-
-	err = gpio_request(NETSPACE_V2_GPIO_SATA0_POWER, "SATA0 power");
-	if (err == 0) {
-		err = gpio_direction_output(NETSPACE_V2_GPIO_SATA0_POWER, 1);
-		if (err)
-			gpio_free(NETSPACE_V2_GPIO_SATA0_POWER);
-	}
-	if (err)
-		pr_err("netspace_v2: failed to setup SATA0 power\n");
-
-	if (machine_is_netspace_max_v2()) {
-		err = gpio_request(NETSPACE_V2_GPIO_SATA1_POWER, "SATA1 power");
-		if (err == 0) {
-			err = gpio_direction_output(
-					NETSPACE_V2_GPIO_SATA1_POWER, 1);
-			if (err)
-				gpio_free(NETSPACE_V2_GPIO_SATA1_POWER);
-		}
-		if (err)
-			pr_err("netspace_v2: failed to setup SATA1 power\n");
-	}
-}
-
 /*****************************************************************************
  * GPIO keys
  ****************************************************************************/
@@ -224,20 +137,6 @@ static struct platform_device netspace_v2_leds = {
 };
 
 /*****************************************************************************
- * Timer
- ****************************************************************************/
-
-static void netspace_v2_timer_init(void)
-{
-	kirkwood_tclk = 166666667;
-	orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
-}
-
-struct sys_timer netspace_v2_timer = {
-	.init = netspace_v2_timer_init,
-};
-
-/*****************************************************************************
  * General Setup
  ****************************************************************************/
 
@@ -291,18 +190,17 @@ static void __init netspace_v2_init(void)
 	kirkwood_init();
 	kirkwood_mpp_conf(netspace_v2_mpp_config);
 
-	netspace_v2_sata_power_init();
+	if (machine_is_netspace_max_v2())
+		lacie_v2_hdd_power_init(2);
+	else
+		lacie_v2_hdd_power_init(1);
 
 	kirkwood_ehci_init();
 	kirkwood_ge00_init(&netspace_v2_ge00_data);
 	kirkwood_sata_init(&netspace_v2_sata_data);
 	kirkwood_uart0_init();
-	spi_register_board_info(netspace_v2_spi_slave_info,
-				ARRAY_SIZE(netspace_v2_spi_slave_info));
-	kirkwood_spi_init();
-	kirkwood_i2c_init();
-	i2c_register_board_info(0, netspace_v2_i2c_info,
-				ARRAY_SIZE(netspace_v2_i2c_info));
+	lacie_v2_register_flash();
+	lacie_v2_register_i2c_devices();
 
 	platform_device_register(&netspace_v2_leds);
 	platform_device_register(&netspace_v2_gpio_leds);
@@ -317,36 +215,30 @@ static void __init netspace_v2_init(void)
 
 #ifdef CONFIG_MACH_NETSPACE_V2
 MACHINE_START(NETSPACE_V2, "LaCie Network Space v2")
-	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
-	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.init_machine	= netspace_v2_init,
 	.map_io		= kirkwood_map_io,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &netspace_v2_timer,
+	.timer		= &lacie_v2_timer,
 MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_INETSPACE_V2
 MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2")
-	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
-	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.init_machine	= netspace_v2_init,
 	.map_io		= kirkwood_map_io,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &netspace_v2_timer,
+	.timer		= &lacie_v2_timer,
 MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_NETSPACE_MAX_V2
 MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2")
-	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
-	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.init_machine	= netspace_v2_init,
 	.map_io		= kirkwood_map_io,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &netspace_v2_timer,
+	.timer		= &lacie_v2_timer,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-kirkwood/netxbig_v2-setup.c b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
index 2bd14c5079d..a1b45d501ae 100644
--- a/arch/arm/mach-kirkwood/netxbig_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
@@ -23,55 +23,19 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
-#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/leds.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/time.h>
 #include <mach/kirkwood.h>
-#include <plat/time.h>
+#include <mach/leds-netxbig.h>
 #include "common.h"
 #include "mpp.h"
-
-/*****************************************************************************
- * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005)
- ****************************************************************************/
-
-static struct mtd_partition netxbig_v2_flash_parts[] = {
-	{
-		.name = "u-boot",
-		.size = MTDPART_SIZ_FULL,
-		.offset = 0,
-		.mask_flags = MTD_WRITEABLE, /* force read-only */
-	},
-};
-
-static const struct flash_platform_data netxbig_v2_flash = {
-	.type		= "mx25l4005a",
-	.name		= "spi_flash",
-	.parts		= netxbig_v2_flash_parts,
-	.nr_parts	= ARRAY_SIZE(netxbig_v2_flash_parts),
-};
-
-static struct spi_board_info __initdata netxbig_v2_spi_slave_info[] = {
-	{
-		.modalias	= "m25p80",
-		.platform_data	= &netxbig_v2_flash,
-		.irq		= -1,
-		.max_speed_hz	= 20000000,
-		.bus_num	= 0,
-		.chip_select	= 0,
-	},
-};
+#include "lacie_v2-common.h"
 
 /*****************************************************************************
  * Ethernet
@@ -86,27 +50,6 @@ static struct mv643xx_eth_platform_data netxbig_v2_ge01_data = {
 };
 
 /*****************************************************************************
- * I2C devices
- ****************************************************************************/
-
-static struct at24_platform_data at24c04 = {
-	.byte_len	= SZ_4K / 8,
-	.page_size	= 16,
-};
-
-/*
- * i2c addr | chip         | description
- * 0x50     | HT24LC04     | eeprom (512B)
- */
-
-static struct i2c_board_info __initdata netxbig_v2_i2c_info[] = {
-	{
-		I2C_BOARD_INFO("24c04", 0x50),
-		.platform_data  = &at24c04,
-	}
-};
-
-/*****************************************************************************
  * SATA
  ****************************************************************************/
 
@@ -114,34 +57,6 @@ static struct mv_sata_platform_data netxbig_v2_sata_data = {
 	.n_ports	= 2,
 };
 
-static int __initdata netxbig_v2_gpio_hdd_power[] = { 16, 17, 41, 42, 43 };
-
-static void __init netxbig_v2_sata_power_init(void)
-{
-	int i;
-	int err;
-	int hdd_nb;
-
-	if (machine_is_net2big_v2())
-		hdd_nb = 2;
-	else
-		hdd_nb = 5;
-
-	/* Power up all hard disks. */
-	for (i = 0; i < hdd_nb; i++) {
-		err = gpio_request(netxbig_v2_gpio_hdd_power[i], NULL);
-		if (err == 0) {
-			err = gpio_direction_output(
-					netxbig_v2_gpio_hdd_power[i], 1);
-			/* Free the HDD power GPIOs. This allow user-space to
-			 * configure them via the gpiolib sysfs interface. */
-			gpio_free(netxbig_v2_gpio_hdd_power[i]);
-		}
-		if (err)
-			pr_err("netxbig_v2: failed to power up HDD%d\n", i + 1);
-	}
-}
-
 /*****************************************************************************
  * GPIO keys
  ****************************************************************************/
@@ -190,7 +105,7 @@ static struct platform_device netxbig_v2_gpio_buttons = {
 };
 
 /*****************************************************************************
- * GPIO LEDs
+ * GPIO extension LEDs
  ****************************************************************************/
 
 /*
@@ -200,19 +115,32 @@ static struct platform_device netxbig_v2_gpio_buttons = {
  * - address register : bit [0-2] -> GPIO [47-49]
  * - data register    : bit [0-2] -> GPIO [44-46]
  * - enable register  : GPIO 29
- *
+ */
+
+static int netxbig_v2_gpio_ext_addr[] = { 47, 48, 49 };
+static int netxbig_v2_gpio_ext_data[] = { 44, 45, 46 };
+
+static struct netxbig_gpio_ext netxbig_v2_gpio_ext = {
+	.addr		= netxbig_v2_gpio_ext_addr,
+	.num_addr	= ARRAY_SIZE(netxbig_v2_gpio_ext_addr),
+	.data		= netxbig_v2_gpio_ext_data,
+	.num_data	= ARRAY_SIZE(netxbig_v2_gpio_ext_data),
+	.enable		= 29,
+};
+
+/*
  * Address register selection:
  *
  * addr | register
  * ----------------------------
  *   0  | front LED
  *   1  | front LED brightness
- *   2  | HDD LED brightness
- *   3  | HDD1 LED
- *   4  | HDD2 LED
- *   5  | HDD3 LED
- *   6  | HDD4 LED
- *   7  | HDD5 LED
+ *   2  | SATA LED brightness
+ *   3  | SATA0 LED
+ *   4  | SATA1 LED
+ *   5  | SATA2 LED
+ *   6  | SATA3 LED
+ *   7  | SATA4 LED
  *
  * Data register configuration:
  *
@@ -233,30 +161,107 @@ static struct platform_device netxbig_v2_gpio_buttons = {
  *   6  | blink blue on=1 sec and red on=1 sec
  *   7  | blink blue on=0.5 sec and blue off=2.5 sec
  *
- * data | HDD LED mode
+ * data | SATA LED mode
  * -------------------------------------------------
- *   0  | fix blue on
+ *   0  | fix off
  *   1  | SATA activity blink
  *   2  | fix red on
  *   3  | blink blue on=1 sec and blue off=1 sec
  *   4  | blink red on=1 sec and red off=1 sec
  *   5  | blink blue on=2.5 sec and red on=0.5 sec
  *   6  | blink blue on=1 sec and red on=1 sec
- *   7  | blink blue on=0.5 sec and blue off=2.5 sec
+ *   7  | fix blue on
  */
 
-/*****************************************************************************
- * Timer
- ****************************************************************************/
+static int netxbig_v2_red_mled[NETXBIG_LED_MODE_NUM] = {
+	[NETXBIG_LED_OFF]	= 0,
+	[NETXBIG_LED_ON]	= 2,
+	[NETXBIG_LED_SATA]	= NETXBIG_LED_INVALID_MODE,
+	[NETXBIG_LED_TIMER1]	= 4,
+	[NETXBIG_LED_TIMER2]	= NETXBIG_LED_INVALID_MODE,
+};
 
-static void netxbig_v2_timer_init(void)
-{
-	kirkwood_tclk = 166666667;
-	orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
-}
+static int netxbig_v2_blue_pwr_mled[NETXBIG_LED_MODE_NUM] = {
+	[NETXBIG_LED_OFF]	= 0,
+	[NETXBIG_LED_ON]	= 1,
+	[NETXBIG_LED_SATA]	= NETXBIG_LED_INVALID_MODE,
+	[NETXBIG_LED_TIMER1]	= 3,
+	[NETXBIG_LED_TIMER2]	= 7,
+};
+
+static int netxbig_v2_blue_sata_mled[NETXBIG_LED_MODE_NUM] = {
+	[NETXBIG_LED_OFF]	= 0,
+	[NETXBIG_LED_ON]	= 7,
+	[NETXBIG_LED_SATA]	= 1,
+	[NETXBIG_LED_TIMER1]	= 3,
+	[NETXBIG_LED_TIMER2]	= NETXBIG_LED_INVALID_MODE,
+};
+
+static struct netxbig_led_timer netxbig_v2_led_timer[] = {
+	[0] = {
+		.delay_on	= 500,
+		.delay_off	= 500,
+		.mode		= NETXBIG_LED_TIMER1,
+	},
+	[1] = {
+		.delay_on	= 500,
+		.delay_off	= 1000,
+		.mode		= NETXBIG_LED_TIMER2,
+	},
+};
+
+#define NETXBIG_LED(_name, maddr, mval, baddr)			\
+	{ .name		= _name,				\
+	  .mode_addr	= maddr,				\
+	  .mode_val	= mval,					\
+	  .bright_addr	= baddr }
+
+static struct netxbig_led net2big_v2_leds_ctrl[] = {
+	NETXBIG_LED("net2big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled,  1),
+	NETXBIG_LED("net2big-v2:red:power",  0, netxbig_v2_red_mled,       1),
+	NETXBIG_LED("net2big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2),
+	NETXBIG_LED("net2big-v2:red:sata0",  3, netxbig_v2_red_mled,       2),
+	NETXBIG_LED("net2big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2),
+	NETXBIG_LED("net2big-v2:red:sata1",  4, netxbig_v2_red_mled,       2),
+};
+
+static struct netxbig_led_platform_data net2big_v2_leds_data = {
+	.gpio_ext	= &netxbig_v2_gpio_ext,
+	.timer		= netxbig_v2_led_timer,
+	.num_timer	= ARRAY_SIZE(netxbig_v2_led_timer),
+	.leds		= net2big_v2_leds_ctrl,
+	.num_leds	= ARRAY_SIZE(net2big_v2_leds_ctrl),
+};
+
+static struct netxbig_led net5big_v2_leds_ctrl[] = {
+	NETXBIG_LED("net5big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled,  1),
+	NETXBIG_LED("net5big-v2:red:power",  0, netxbig_v2_red_mled,       1),
+	NETXBIG_LED("net5big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2),
+	NETXBIG_LED("net5big-v2:red:sata0",  3, netxbig_v2_red_mled,       2),
+	NETXBIG_LED("net5big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2),
+	NETXBIG_LED("net5big-v2:red:sata1",  4, netxbig_v2_red_mled,       2),
+	NETXBIG_LED("net5big-v2:blue:sata2", 5, netxbig_v2_blue_sata_mled, 2),
+	NETXBIG_LED("net5big-v2:red:sata2",  5, netxbig_v2_red_mled,       2),
+	NETXBIG_LED("net5big-v2:blue:sata3", 6, netxbig_v2_blue_sata_mled, 2),
+	NETXBIG_LED("net5big-v2:red:sata3",  6, netxbig_v2_red_mled,       2),
+	NETXBIG_LED("net5big-v2:blue:sata4", 7, netxbig_v2_blue_sata_mled, 2),
+	NETXBIG_LED("net5big-v2:red:sata5",  7, netxbig_v2_red_mled,       2),
+};
 
-struct sys_timer netxbig_v2_timer = {
-	.init = netxbig_v2_timer_init,
+static struct netxbig_led_platform_data net5big_v2_leds_data = {
+	.gpio_ext	= &netxbig_v2_gpio_ext,
+	.timer		= netxbig_v2_led_timer,
+	.num_timer	= ARRAY_SIZE(netxbig_v2_led_timer),
+	.leds		= net5big_v2_leds_ctrl,
+	.num_leds	= ARRAY_SIZE(net5big_v2_leds_ctrl),
+};
+
+static struct platform_device netxbig_v2_leds = {
+	.name		= "leds-netxbig",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &net2big_v2_leds_data,
+	},
 };
 
 /*****************************************************************************
@@ -284,18 +289,18 @@ static unsigned int net2big_v2_mpp_config[] __initdata = {
 	MPP24_GPIO,		/* USB mode select */
 	MPP26_GPIO,		/* USB device vbus */
 	MPP28_GPIO,		/* USB enable host vbus */
-	MPP29_GPIO,		/* CPLD extension ALE */
+	MPP29_GPIO,		/* GPIO extension ALE */
 	MPP34_GPIO,		/* Rear Push button */
 	MPP35_GPIO,		/* Inhibit switch power-off */
 	MPP36_GPIO,		/* SATA HDD1 presence */
 	MPP37_GPIO,		/* SATA HDD2 presence */
 	MPP40_GPIO,		/* eSATA presence */
-	MPP44_GPIO,		/* CPLD extension (data 0) */
-	MPP45_GPIO,		/* CPLD extension (data 1) */
-	MPP46_GPIO,		/* CPLD extension (data 2) */
-	MPP47_GPIO,		/* CPLD extension (addr 0) */
-	MPP48_GPIO,		/* CPLD extension (addr 1) */
-	MPP49_GPIO,		/* CPLD extension (addr 2) */
+	MPP44_GPIO,		/* GPIO extension (data 0) */
+	MPP45_GPIO,		/* GPIO extension (data 1) */
+	MPP46_GPIO,		/* GPIO extension (data 2) */
+	MPP47_GPIO,		/* GPIO extension (addr 0) */
+	MPP48_GPIO,		/* GPIO extension (addr 1) */
+	MPP49_GPIO,		/* GPIO extension (addr 2) */
 	0
 };
 
@@ -324,7 +329,7 @@ static unsigned int net5big_v2_mpp_config[] __initdata = {
 	MPP26_GE1_RXD2,
 	MPP27_GE1_RXD3,
 	MPP28_GPIO,		/* USB enable host vbus */
-	MPP29_GPIO,		/* CPLD extension ALE */
+	MPP29_GPIO,		/* GPIO extension ALE */
 	MPP30_GE1_RXCTL,
 	MPP31_GE1_RXCLK,
 	MPP32_GE1_TCLKOUT,
@@ -339,12 +344,12 @@ static unsigned int net5big_v2_mpp_config[] __initdata = {
 	MPP41_GPIO,		/* SATA HDD3 power */
 	MPP42_GPIO,		/* SATA HDD4 power */
 	MPP43_GPIO,		/* SATA HDD5 power */
-	MPP44_GPIO,		/* CPLD extension (data 0) */
-	MPP45_GPIO,		/* CPLD extension (data 1) */
-	MPP46_GPIO,		/* CPLD extension (data 2) */
-	MPP47_GPIO,		/* CPLD extension (addr 0) */
-	MPP48_GPIO,		/* CPLD extension (addr 1) */
-	MPP49_GPIO,		/* CPLD extension (addr 2) */
+	MPP44_GPIO,		/* GPIO extension (data 0) */
+	MPP45_GPIO,		/* GPIO extension (data 1) */
+	MPP46_GPIO,		/* GPIO extension (data 2) */
+	MPP47_GPIO,		/* GPIO extension (addr 0) */
+	MPP48_GPIO,		/* GPIO extension (addr 1) */
+	MPP49_GPIO,		/* GPIO extension (addr 2) */
 	0
 };
 
@@ -366,7 +371,10 @@ static void __init netxbig_v2_init(void)
 	else
 		kirkwood_mpp_conf(net5big_v2_mpp_config);
 
-	netxbig_v2_sata_power_init();
+	if (machine_is_net2big_v2())
+		lacie_v2_hdd_power_init(2);
+	else
+		lacie_v2_hdd_power_init(5);
 
 	kirkwood_ehci_init();
 	kirkwood_ge00_init(&netxbig_v2_ge00_data);
@@ -374,13 +382,12 @@ static void __init netxbig_v2_init(void)
 		kirkwood_ge01_init(&netxbig_v2_ge01_data);
 	kirkwood_sata_init(&netxbig_v2_sata_data);
 	kirkwood_uart0_init();
-	spi_register_board_info(netxbig_v2_spi_slave_info,
-				ARRAY_SIZE(netxbig_v2_spi_slave_info));
-	kirkwood_spi_init();
-	kirkwood_i2c_init();
-	i2c_register_board_info(0, netxbig_v2_i2c_info,
-				ARRAY_SIZE(netxbig_v2_i2c_info));
+	lacie_v2_register_flash();
+	lacie_v2_register_i2c_devices();
 
+	if (machine_is_net5big_v2())
+		netxbig_v2_leds.dev.platform_data = &net5big_v2_leds_data;
+	platform_device_register(&netxbig_v2_leds);
 	platform_device_register(&netxbig_v2_gpio_buttons);
 
 	if (gpio_request(NETXBIG_V2_GPIO_POWER_OFF, "power-off") == 0 &&
@@ -392,24 +399,20 @@ static void __init netxbig_v2_init(void)
 
 #ifdef CONFIG_MACH_NET2BIG_V2
 MACHINE_START(NET2BIG_V2, "LaCie 2Big Network v2")
-	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
-	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.init_machine	= netxbig_v2_init,
 	.map_io		= kirkwood_map_io,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &netxbig_v2_timer,
+	.timer		= &lacie_v2_timer,
 MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_NET5BIG_V2
 MACHINE_START(NET5BIG_V2, "LaCie 5Big Network v2")
-	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
-	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.init_machine	= netxbig_v2_init,
 	.map_io		= kirkwood_map_io,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &netxbig_v2_timer,
+	.timer		= &lacie_v2_timer,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c
index fd06be61881..c9d77fad10a 100644
--- a/arch/arm/mach-kirkwood/openrd-setup.c
+++ b/arch/arm/mach-kirkwood/openrd-setup.c
@@ -16,6 +16,7 @@
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/i2c.h>
+#include <linux/gpio.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
@@ -57,7 +58,22 @@ static struct mvsdio_platform_data openrd_mvsdio_data = {
 };
 
 static unsigned int openrd_mpp_config[] __initdata = {
+	MPP12_SD_CLK,
+	MPP13_SD_CMD,
+	MPP14_SD_D0,
+	MPP15_SD_D1,
+	MPP16_SD_D2,
+	MPP17_SD_D3,
+	MPP28_GPIO,
 	MPP29_GPIO,
+	MPP34_GPIO,
+	0
+};
+
+/* Configure MPP for UART1 */
+static unsigned int openrd_uart1_mpp_config[] __initdata = {
+	MPP13_UART1_TXD,
+	MPP14_UART1_RXD,
 	0
 };
 
@@ -67,6 +83,68 @@ static struct i2c_board_info i2c_board_info[] __initdata = {
 	},
 };
 
+static int __initdata uart1;
+
+static int __init sd_uart_selection(char *str)
+{
+	uart1 = -EINVAL;
+
+	/* Default is SD. Change if required, for UART */
+	if (!str)
+		return 0;
+
+	if (!strncmp(str, "232", 3)) {
+		uart1 = 232;
+	} else if (!strncmp(str, "485", 3)) {
+		/* OpenRD-Base doesn't have RS485. Treat is as an
+		 * unknown argument & just have default setting -
+		 * which is SD */
+		if (machine_is_openrd_base()) {
+			uart1 = -ENODEV;
+			return 1;
+		}
+
+		uart1 = 485;
+	}
+	return 1;
+}
+/* Parse boot_command_line string kw_openrd_init_uart1=232/485 */
+__setup("kw_openrd_init_uart1=", sd_uart_selection);
+
+static int __init uart1_mpp_config(void)
+{
+	kirkwood_mpp_conf(openrd_uart1_mpp_config);
+
+	if (gpio_request(34, "SD_UART1_SEL")) {
+		printk(KERN_ERR "GPIO request failed for SD/UART1 selection"
+				", gpio: 34\n");
+		return -EIO;
+	}
+
+	if (gpio_request(28, "RS232_RS485_SEL")) {
+		printk(KERN_ERR "GPIO request failed for RS232/RS485 selection"
+				", gpio# 28\n");
+		gpio_free(34);
+		return -EIO;
+	}
+
+	/* Select UART1
+	 * Pin # 34: 0 => UART1, 1 => SD */
+	gpio_direction_output(34, 0);
+
+	/* Select RS232 OR RS485
+	 * Pin # 28: 0 => RS232, 1 => RS485 */
+	if (uart1 == 232)
+		gpio_direction_output(28, 0);
+	else
+		gpio_direction_output(28, 1);
+
+	gpio_free(34);
+	gpio_free(28);
+
+	return 0;
+}
+
 static void __init openrd_init(void)
 {
 	/*
@@ -90,7 +168,6 @@ static void __init openrd_init(void)
 		kirkwood_ge01_init(&openrd_ge01_data);
 
 	kirkwood_sata_init(&openrd_sata_data);
-	kirkwood_sdio_init(&openrd_mvsdio_data);
 
 	kirkwood_i2c_init();
 
@@ -99,6 +176,28 @@ static void __init openrd_init(void)
 			ARRAY_SIZE(i2c_board_info));
 		kirkwood_audio_init();
 	}
+
+	if (uart1 <= 0) {
+		if (uart1 < 0)
+			printk(KERN_ERR "Invalid kernel parameter to select "
+				"UART1. Defaulting to SD. ERROR CODE: %d\n",
+				uart1);
+
+		/* Select SD
+		 * Pin # 34: 0 => UART1, 1 => SD */
+		if (gpio_request(34, "SD_UART1_SEL")) {
+			printk(KERN_ERR "GPIO request failed for SD/UART1 "
+					"selection, gpio: 34\n");
+		} else {
+
+			gpio_direction_output(34, 1);
+			gpio_free(34);
+			kirkwood_sdio_init(&openrd_mvsdio_data);
+		}
+	} else {
+		if (!uart1_mpp_config())
+			kirkwood_uart1_init();
+	}
 }
 
 static int __init openrd_pci_init(void)
@@ -115,8 +214,6 @@ subsys_initcall(openrd_pci_init);
 #ifdef CONFIG_MACH_OPENRD_BASE
 MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
 	/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
-	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
-	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.init_machine	= openrd_init,
 	.map_io		= kirkwood_map_io,
@@ -128,8 +225,6 @@ MACHINE_END
 #ifdef CONFIG_MACH_OPENRD_CLIENT
 MACHINE_START(OPENRD_CLIENT, "Marvell OpenRD Client Board")
 	/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
-	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
-	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.init_machine	= openrd_init,
 	.map_io		= kirkwood_map_io,
@@ -141,8 +236,6 @@ MACHINE_END
 #ifdef CONFIG_MACH_OPENRD_ULTIMATE
 MACHINE_START(OPENRD_ULTIMATE, "Marvell OpenRD Ultimate Board")
 	/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
-	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
-	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.init_machine	= openrd_init,
 	.map_io		= kirkwood_map_io,
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
index c34718c2cfe..0049614cd32 100644
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -79,8 +79,6 @@ subsys_initcall(rd88f6192_pci_init);
 
 MACHINE_START(RD88F6192_NAS, "Marvell RD-88F6192-NAS Development Board")
 	/* Maintainer: Saeed Bishara <saeed@marvell.com> */
-	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
-	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.init_machine	= rd88f6192_init,
 	.map_io		= kirkwood_map_io,
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index 3d1477135e1..0998a08cf42 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -115,8 +115,6 @@ subsys_initcall(rd88f6281_pci_init);
 
 MACHINE_START(RD88F6281, "Marvell RD-88F6281 Reference Board")
 	/* Maintainer: Saeed Bishara <saeed@marvell.com> */
-	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
-	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.init_machine	= rd88f6281_init,
 	.map_io		= kirkwood_map_io,
diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
index a00879d34d5..d2eec35dfe0 100644
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
@@ -131,8 +131,6 @@ static void __init sheevaplug_init(void)
 #ifdef CONFIG_MACH_SHEEVAPLUG
 MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board")
 	/* Maintainer: shadi Ammouri <shadi@marvell.com> */
-	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
-	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.init_machine	= sheevaplug_init,
 	.map_io		= kirkwood_map_io,
@@ -143,8 +141,6 @@ MACHINE_END
 
 #ifdef CONFIG_MACH_ESATA_SHEEVAPLUG
 MACHINE_START(ESATA_SHEEVAPLUG, "Marvell eSATA SheevaPlug Reference Board")
-	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
-	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.init_machine	= sheevaplug_init,
 	.map_io		= kirkwood_map_io,
diff --git a/arch/arm/mach-kirkwood/t5325-setup.c b/arch/arm/mach-kirkwood/t5325-setup.c
index d01bf89cedb..ce50e61aac9 100644
--- a/arch/arm/mach-kirkwood/t5325-setup.c
+++ b/arch/arm/mach-kirkwood/t5325-setup.c
@@ -184,8 +184,6 @@ subsys_initcall(hp_t5325_pci_init);
 
 MACHINE_START(T5325, "HP t5325 Thin Client")
 	/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
-	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
-	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.init_machine	= hp_t5325_init,
 	.map_io		= kirkwood_map_io,
diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c
index a5bd7fde04a..6710bd7773b 100644
--- a/arch/arm/mach-kirkwood/ts219-setup.c
+++ b/arch/arm/mach-kirkwood/ts219-setup.c
@@ -120,8 +120,6 @@ subsys_initcall(ts219_pci_init);
 
 MACHINE_START(TS219, "QNAP TS-119/TS-219")
 	/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
-	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
-	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.init_machine	= qnap_ts219_init,
 	.map_io		= kirkwood_map_io,
diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c
index 2e14afef07a..8be09a0ce4a 100644
--- a/arch/arm/mach-kirkwood/ts41x-setup.c
+++ b/arch/arm/mach-kirkwood/ts41x-setup.c
@@ -149,8 +149,6 @@ subsys_initcall(ts41x_pci_init);
 
 MACHINE_START(TS41X, "QNAP TS-41x")
 	/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
-	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
-	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.init_machine	= qnap_ts41x_init,
 	.map_io		= kirkwood_map_io,
diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c
index 9e3e5a640ad..3ca4f8e6f54 100644
--- a/arch/arm/mach-ks8695/board-acs5k.c
+++ b/arch/arm/mach-ks8695/board-acs5k.c
@@ -223,8 +223,6 @@ static void __init acs5k_init(void)
 
 MACHINE_START(ACS5K, "Brivo Systems LLC ACS-5000 Master board")
 	/* Maintainer: Simtec Electronics. */
-	.phys_io	= KS8695_IO_PA,
-	.io_pg_offst	= (KS8695_IO_VA >> 18) & 0xfffc,
 	.boot_params	= KS8695_SDRAM_PA + 0x100,
 	.map_io		= ks8695_map_io,
 	.init_irq	= ks8695_init_irq,
diff --git a/arch/arm/mach-ks8695/board-dsm320.c b/arch/arm/mach-ks8695/board-dsm320.c
index 521ff0789f3..ada92b6bed2 100644
--- a/arch/arm/mach-ks8695/board-dsm320.c
+++ b/arch/arm/mach-ks8695/board-dsm320.c
@@ -121,8 +121,6 @@ static void __init dsm320_init(void)
 
 MACHINE_START(DSM320, "D-Link DSM-320 Wireless Media Player")
 	/* Maintainer: Simtec Electronics. */
-	.phys_io	= KS8695_IO_PA,
-	.io_pg_offst	= (KS8695_IO_VA >> 18) & 0xfffc,
 	.boot_params	= KS8695_SDRAM_PA + 0x100,
 	.map_io		= ks8695_map_io,
 	.init_irq	= ks8695_init_irq,
diff --git a/arch/arm/mach-ks8695/board-micrel.c b/arch/arm/mach-ks8695/board-micrel.c
index 8ceaf5ac6e2..c7ad09bd6ea 100644
--- a/arch/arm/mach-ks8695/board-micrel.c
+++ b/arch/arm/mach-ks8695/board-micrel.c
@@ -53,8 +53,6 @@ static void __init micrel_init(void)
 
 MACHINE_START(KS8695, "KS8695 Centaur Development Board")
 	/* Maintainer: Micrel Semiconductor Inc. */
-	.phys_io	= KS8695_IO_PA,
-	.io_pg_offst	= (KS8695_IO_VA >> 18) & 0xfffc,
 	.boot_params	= KS8695_SDRAM_PA + 0x100,
 	.map_io		= ks8695_map_io,
 	.init_irq	= ks8695_init_irq,
diff --git a/arch/arm/mach-ks8695/include/mach/debug-macro.S b/arch/arm/mach-ks8695/include/mach/debug-macro.S
index cf2095da237..bf516adf192 100644
--- a/arch/arm/mach-ks8695/include/mach/debug-macro.S
+++ b/arch/arm/mach-ks8695/include/mach/debug-macro.S
@@ -14,11 +14,9 @@
 #include <mach/hardware.h>
 #include <mach/regs-uart.h>
 
-	.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1				@ MMU enabled?
-		ldreq	\rx, =KS8695_UART_PA		@ physical base address
-		ldrne	\rx, =KS8695_UART_VA		@ virtual base address
+	.macro	addruart, rp, rv
+		ldr	\rp, =KS8695_UART_PA		@ physical base address
+		ldr	\rv, =KS8695_UART_VA		@ virtual base address
 	.endm
 
 	.macro	senduart, rd, rx
diff --git a/arch/arm/mach-l7200/include/mach/debug-macro.S b/arch/arm/mach-l7200/include/mach/debug-macro.S
new file mode 100644
index 00000000000..b0a2db77d39
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/debug-macro.S
@@ -0,0 +1,38 @@
+/* arch/arm/mach-l7200/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.equ	io_virt, IO_BASE
+		.equ	io_phys, IO_START
+
+		.macro	addruart, rp, rv
+		mov	\rp, #0x00044000	@ UART1
+@		mov	\rp, #0x00045000	@ UART2
+		add	\rv, \rp, #io_virt	@ virtual address
+		add	\rp, \rp, #io_phys	@ physical base address
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #0x0]	@ UARTDR
+		.endm
+
+		.macro	waituart,rd,rx
+1001:		ldr	\rd, [\rx, #0x18]	@ UARTFLG
+		tst	\rd, #1 << 5		@ UARTFLGUTXFF - 1 when full
+		bne	1001b
+		.endm
+
+		.macro	busyuart,rd,rx
+1001:		ldr	\rd, [\rx, #0x18]	@ UARTFLG
+		tst	\rd, #1 << 3		@ UARTFLGUBUSY - 1 when busy
+		bne	1001b
+		.endm
diff --git a/arch/arm/mach-lh7a40x/arch-kev7a400.c b/arch/arm/mach-lh7a40x/arch-kev7a400.c
index 3d7bd50b909..9088c16662e 100644
--- a/arch/arm/mach-lh7a40x/arch-kev7a400.c
+++ b/arch/arm/mach-lh7a40x/arch-kev7a400.c
@@ -111,8 +111,6 @@ void __init lh7a40x_init_board_irq (void)
 
 MACHINE_START (KEV7A400, "Sharp KEV7a400")
 	/* Maintainer: Marc Singer */
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((io_p2v (0x80000000))>>18) & 0xfffc,
 	.boot_params	= 0xc0000100,
 	.map_io		= kev7a400_map_io,
 	.init_irq	= lh7a400_init_irq,
diff --git a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
index cb15e5d3212..7315a569aea 100644
--- a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
+++ b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
@@ -398,8 +398,6 @@ lpd7a40x_map_io(void)
 
 MACHINE_START (LPD7A400, "Logic Product Development LPD7A400-10")
 	/* Maintainer: Marc Singer */
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((io_p2v (0x80000000))>>18) & 0xfffc,
 	.boot_params	= 0xc0000100,
 	.map_io		= lpd7a40x_map_io,
 	.init_irq	= lh7a400_init_irq,
@@ -413,8 +411,6 @@ MACHINE_END
 
 MACHINE_START (LPD7A404, "Logic Product Development LPD7A404-10")
 	/* Maintainer: Marc Singer */
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((io_p2v (0x80000000))>>18) & 0xfffc,
 	.boot_params	= 0xc0000100,
 	.map_io		= lpd7a40x_map_io,
 	.init_irq	= lh7a404_init_irq,
diff --git a/arch/arm/mach-lh7a40x/include/mach/debug-macro.S b/arch/arm/mach-lh7a40x/include/mach/debug-macro.S
index c0dcbbba22b..cff33625276 100644
--- a/arch/arm/mach-lh7a40x/include/mach/debug-macro.S
+++ b/arch/arm/mach-lh7a40x/include/mach/debug-macro.S
@@ -14,12 +14,10 @@
 	@ It is not known if this will be appropriate for every 40x
 	@ board.
 
-		.macro  addruart, rx, tmp
-		mrc     p15, 0, \rx, c1, c0
-		tst     \rx, #1                 @ MMU enabled?
-		mov     \rx, #0x00000700        @ offset from base
-		orreq   \rx, \rx, #0x80000000   @ physical base
-		orrne   \rx, \rx, #0xf8000000   @ virtual base
+		.macro  addruart, rp, rv
+		mov     \rp, #0x00000700        @ offset from base
+		orr     \rv, \rp, #0xf8000000   @ virtual base
+		orr     \rp, \rp, #0x80000000   @ physical base
 		.endm
 
 		.macro  senduart,rd,rx
diff --git a/arch/arm/mach-loki/include/mach/debug-macro.S b/arch/arm/mach-loki/include/mach/debug-macro.S
index 3136c913a92..cc90d99ac76 100644
--- a/arch/arm/mach-loki/include/mach/debug-macro.S
+++ b/arch/arm/mach-loki/include/mach/debug-macro.S
@@ -8,12 +8,11 @@
 
 #include <mach/loki.h>
 
-	.macro	addruart, rx, tmp
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1					@ MMU enabled?
-	ldreq	\rx, =LOKI_REGS_PHYS_BASE
-	ldrne	\rx, =LOKI_REGS_VIRT_BASE
-	orr	\rx, \rx, #0x00012000
+	.macro	addruart, rp, rv
+	ldr	\rp, =LOKI_REGS_PHYS_BASE
+	ldr	\rv, =LOKI_REGS_VIRT_BASE
+	orr	\rp, \rp, #0x00012000
+	orr	\rv, \rv, #0x00012000
 	.endm
 
 #define UART_SHIFT	2
diff --git a/arch/arm/mach-loki/lb88rc8480-setup.c b/arch/arm/mach-loki/lb88rc8480-setup.c
index 85f9c1296aa..a1e75e7fc50 100644
--- a/arch/arm/mach-loki/lb88rc8480-setup.c
+++ b/arch/arm/mach-loki/lb88rc8480-setup.c
@@ -90,8 +90,6 @@ static void __init lb88rc8480_init(void)
 
 MACHINE_START(LB88RC8480, "Marvell LB88RC8480 Development Board")
 	/* Maintainer: Ke Wei <kewei@marvell.com> */
-	.phys_io	= LOKI_REGS_PHYS_BASE,
-	.io_pg_offst	= ((LOKI_REGS_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.init_machine	= lb88rc8480_init,
 	.map_io		= loki_map_io,
diff --git a/arch/arm/mach-lpc32xx/include/mach/debug-macro.S b/arch/arm/mach-lpc32xx/include/mach/debug-macro.S
index 621744d6b15..629e744aeb9 100644
--- a/arch/arm/mach-lpc32xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-lpc32xx/include/mach/debug-macro.S
@@ -20,11 +20,9 @@
  * Debug output is hardcoded to standard UART 5
 */
 
-	.macro	addruart,rx, tmp
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1				@ MMU enabled?
-	ldreq	\rx, =0x40090000
-	ldrne	\rx, =0xF4090000
+	.macro	addruart, rp, rv
+	ldreq	\rp, =0x40090000
+	ldrne	\rv, =0xF4090000
 	.endm
 
 #define UART_SHIFT	2
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
index 0c936cf5675..7993b096778 100644
--- a/arch/arm/mach-lpc32xx/phy3250.c
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -382,8 +382,6 @@ arch_initcall(lpc32xx_display_uid);
 
 MACHINE_START(PHY3250, "Phytec 3250 board with the LPC3250 Microcontroller")
 	/* Maintainer: Kevin Wells, NXP Semiconductors */
-	.phys_io	= LPC32XX_UART5_BASE,
-	.io_pg_offst	= ((IO_ADDRESS(LPC32XX_UART5_BASE))>>18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= lpc32xx_map_io,
 	.init_irq	= lpc32xx_init_irq,
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index 6ab843eaa35..0711d3b620a 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -57,6 +57,13 @@ config MACH_MARVELL_JASPER
 	  PXA910-based development board. Since MMP2 is compatible to
 	  ARMv6 architecture.
 
+config MACH_TETON_BGA
+	bool "Marvell's PXA168 Teton BGA Development Board"
+	select CPU_PXA168
+	help
+	  Say 'Y' here if you want to support the Marvell PXA168-based
+	  Teton BGA Development Board.
+
 endmenu
 
 config CPU_PXA168
diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
index 8b66d06739c..751cdbf733c 100644
--- a/arch/arm/mach-mmp/Makefile
+++ b/arch/arm/mach-mmp/Makefile
@@ -17,3 +17,4 @@ obj-$(CONFIG_MACH_TAVOREVB)	+= tavorevb.o
 obj-$(CONFIG_MACH_TTC_DKB)	+= ttc_dkb.o
 obj-$(CONFIG_MACH_FLINT)	+= flint.o
 obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o
+obj-$(CONFIG_MACH_TETON_BGA)	+= teton_bga.o
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
index 0629394a5fb..06b5fa853c9 100644
--- a/arch/arm/mach-mmp/aspenite.c
+++ b/arch/arm/mach-mmp/aspenite.c
@@ -16,6 +16,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
+#include <linux/interrupt.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -23,6 +24,9 @@
 #include <mach/mfp-pxa168.h>
 #include <mach/pxa168.h>
 #include <mach/gpio.h>
+#include <video/pxa168fb.h>
+#include <linux/input.h>
+#include <plat/pxa27x_keypad.h>
 
 #include "common.h"
 
@@ -66,6 +70,43 @@ static unsigned long common_pin_config[] __initdata = {
 	GPIO115_I2S_BCLK,
 	GPIO116_I2S_RXD,
 	GPIO117_I2S_TXD,
+
+	/* LCD */
+	GPIO56_LCD_FCLK_RD,
+	GPIO57_LCD_LCLK_A0,
+	GPIO58_LCD_PCLK_WR,
+	GPIO59_LCD_DENA_BIAS,
+	GPIO60_LCD_DD0,
+	GPIO61_LCD_DD1,
+	GPIO62_LCD_DD2,
+	GPIO63_LCD_DD3,
+	GPIO64_LCD_DD4,
+	GPIO65_LCD_DD5,
+	GPIO66_LCD_DD6,
+	GPIO67_LCD_DD7,
+	GPIO68_LCD_DD8,
+	GPIO69_LCD_DD9,
+	GPIO70_LCD_DD10,
+	GPIO71_LCD_DD11,
+	GPIO72_LCD_DD12,
+	GPIO73_LCD_DD13,
+	GPIO74_LCD_DD14,
+	GPIO75_LCD_DD15,
+	GPIO76_LCD_DD16,
+	GPIO77_LCD_DD17,
+	GPIO78_LCD_DD18,
+	GPIO79_LCD_DD19,
+	GPIO80_LCD_DD20,
+	GPIO81_LCD_DD21,
+	GPIO82_LCD_DD22,
+	GPIO83_LCD_DD23,
+
+	/* Keypad */
+	GPIO109_KP_MKIN1,
+	GPIO110_KP_MKIN0,
+	GPIO111_KP_MKOUT7,
+	GPIO112_KP_MKOUT6,
+	GPIO121_KP_MKIN4,
 };
 
 static struct smc91x_platdata smc91x_info = {
@@ -134,6 +175,51 @@ static struct i2c_board_info aspenite_i2c_info[] __initdata = {
 	{ I2C_BOARD_INFO("wm8753", 0x1b), },
 };
 
+static struct fb_videomode video_modes[] = {
+	[0] = {
+		.pixclock	= 30120,
+		.refresh	= 60,
+		.xres		= 800,
+		.yres		= 480,
+		.hsync_len	= 1,
+		.left_margin	= 215,
+		.right_margin	= 40,
+		.vsync_len	= 1,
+		.upper_margin	= 34,
+		.lower_margin	= 10,
+		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
+	},
+};
+
+struct pxa168fb_mach_info aspenite_lcd_info = {
+	.id			= "Graphic Frame",
+	.modes			= video_modes,
+	.num_modes		= ARRAY_SIZE(video_modes),
+	.pix_fmt		= PIX_FMT_RGB565,
+	.io_pin_allocation_mode = PIN_MODE_DUMB_24,
+	.dumb_mode		= DUMB_MODE_RGB888,
+	.active			= 1,
+	.panel_rbswap		= 0,
+	.invert_pixclock	= 0,
+};
+
+static unsigned int aspenite_matrix_key_map[] = {
+	KEY(0, 6, KEY_UP),	/* SW 4 */
+	KEY(0, 7, KEY_DOWN),	/* SW 5 */
+	KEY(1, 6, KEY_LEFT),	/* SW 6 */
+	KEY(1, 7, KEY_RIGHT),	/* SW 7 */
+	KEY(4, 6, KEY_ENTER),	/* SW 8 */
+	KEY(4, 7, KEY_ESC),	/* SW 9 */
+};
+
+static struct pxa27x_keypad_platform_data aspenite_keypad_info __initdata = {
+	.matrix_key_rows	= 5,
+	.matrix_key_cols	= 8,
+	.matrix_key_map		= aspenite_matrix_key_map,
+	.matrix_key_map_size	= ARRAY_SIZE(aspenite_matrix_key_map),
+	.debounce_interval	= 30,
+};
+
 static void __init common_init(void)
 {
 	mfp_config(ARRAY_AND_SIZE(common_pin_config));
@@ -143,24 +229,24 @@ static void __init common_init(void)
 	pxa168_add_twsi(1, NULL, ARRAY_AND_SIZE(aspenite_i2c_info));
 	pxa168_add_ssp(1);
 	pxa168_add_nand(&aspenite_nand_info);
+	pxa168_add_fb(&aspenite_lcd_info);
+	pxa168_add_keypad(&aspenite_keypad_info);
 
 	/* off-chip devices */
 	platform_device_register(&smc91x_device);
 }
 
 MACHINE_START(ASPENITE, "PXA168-based Aspenite Development Platform")
-	.phys_io        = APB_PHYS_BASE,
-	.io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
 	.map_io		= mmp_map_io,
+	.nr_irqs	= IRQ_BOARD_START,
 	.init_irq       = pxa168_init_irq,
 	.timer          = &pxa168_timer,
 	.init_machine   = common_init,
 MACHINE_END
 
 MACHINE_START(ZYLONITE2, "PXA168-based Zylonite2 Development Platform")
-	.phys_io        = APB_PHYS_BASE,
-	.io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
 	.map_io		= mmp_map_io,
+	.nr_irqs	= IRQ_BOARD_START,
 	.init_irq       = pxa168_init_irq,
 	.timer          = &pxa168_timer,
 	.init_machine   = common_init,
diff --git a/arch/arm/mach-mmp/avengers_lite.c b/arch/arm/mach-mmp/avengers_lite.c
index 69bcba11f53..39f0878d64a 100644
--- a/arch/arm/mach-mmp/avengers_lite.c
+++ b/arch/arm/mach-mmp/avengers_lite.c
@@ -41,8 +41,6 @@ static void __init avengers_lite_init(void)
 }
 
 MACHINE_START(AVENGERS_LITE, "PXA168 Avengers lite Development Platform")
-	.phys_io        = APB_PHYS_BASE,
-	.io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
 	.map_io		= mmp_map_io,
 	.init_irq       = pxa168_init_irq,
 	.timer          = &pxa168_timer,
diff --git a/arch/arm/mach-mmp/common.c b/arch/arm/mach-mmp/common.c
index 3b29fa7e9b0..0ec0ca80bb3 100644
--- a/arch/arm/mach-mmp/common.c
+++ b/arch/arm/mach-mmp/common.c
@@ -10,13 +10,20 @@
 
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/module.h>
 
 #include <asm/page.h>
 #include <asm/mach/map.h>
 #include <mach/addr-map.h>
+#include <mach/cputype.h>
 
 #include "common.h"
 
+#define MMP_CHIPID	(AXI_VIRT_BASE + 0x82c00)
+
+unsigned int mmp_chip_id;
+EXPORT_SYMBOL(mmp_chip_id);
+
 static struct map_desc standard_io_desc[] __initdata = {
 	{
 		.pfn		= __phys_to_pfn(APB_PHYS_BASE),
@@ -34,4 +41,7 @@ static struct map_desc standard_io_desc[] __initdata = {
 void __init mmp_map_io(void)
 {
 	iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
+
+	/* this is early, initialize mmp_chip_id here */
+	mmp_chip_id = __raw_readl(MMP_CHIPID);
 }
diff --git a/arch/arm/mach-mmp/flint.c b/arch/arm/mach-mmp/flint.c
index e4312d238ea..bdeb6db4d49 100644
--- a/arch/arm/mach-mmp/flint.c
+++ b/arch/arm/mach-mmp/flint.c
@@ -16,6 +16,7 @@
 #include <linux/smc91x.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
+#include <linux/interrupt.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -25,6 +26,8 @@
 
 #include "common.h"
 
+#define FLINT_NR_IRQS	(IRQ_BOARD_START + 48)
+
 static unsigned long flint_pin_config[] __initdata = {
 	/* UART1 */
 	GPIO45_UART1_RXD,
@@ -113,9 +116,8 @@ static void __init flint_init(void)
 }
 
 MACHINE_START(FLINT, "Flint Development Platform")
-	.phys_io        = APB_PHYS_BASE,
-	.io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
 	.map_io		= mmp_map_io,
+	.nr_irqs	= FLINT_NR_IRQS,
 	.init_irq       = mmp2_init_irq,
 	.timer          = &mmp2_timer,
 	.init_machine   = flint_init,
diff --git a/arch/arm/mach-mmp/include/mach/cputype.h b/arch/arm/mach-mmp/include/mach/cputype.h
index 83b18721d93..f43a68b213f 100644
--- a/arch/arm/mach-mmp/include/mach/cputype.h
+++ b/arch/arm/mach-mmp/include/mach/cputype.h
@@ -4,36 +4,51 @@
 #include <asm/cputype.h>
 
 /*
- *  CPU   Stepping   OLD_ID       CPU_ID      CHIP_ID
+ *  CPU   Stepping   CPU_ID      CHIP_ID
  *
- * PXA168    A0    0x41159263   0x56158400   0x00A0A333
- * PXA910    Y0    0x41159262   0x56158000   0x00F0C910
- * MMP2	     Z0			0x560f5811
+ * PXA168    S0    0x56158400   0x0000C910
+ * PXA168    A0    0x56158400   0x00A0A168
+ * PXA910    Y1    0x56158400   0x00F2C920
+ * PXA910    A0    0x56158400   0x00F2C910
+ * PXA910    A1    0x56158400   0x00A0C910
+ * PXA920    Y0    0x56158400   0x00F2C920
+ * PXA920    A0    0x56158400   0x00A0C920
+ * PXA920    A1    0x56158400   0x00A1C920
+ * MMP2	     Z0	   0x560f5811   0x00F00410
+ * MMP2      Z1    0x560f5811   0x00E00410
+ * MMP2      A0    0x560f5811   0x00A0A610
  */
 
+extern unsigned int mmp_chip_id;
+
 #ifdef CONFIG_CPU_PXA168
-#  define __cpu_is_pxa168(id)	\
-	({ unsigned int _id = ((id) >> 8) & 0xff; _id == 0x84; })
+static inline int cpu_is_pxa168(void)
+{
+	return (((read_cpuid_id() >> 8) & 0xff) == 0x84) &&
+		((mmp_chip_id & 0xfff) == 0x168);
+}
 #else
-#  define __cpu_is_pxa168(id)	(0)
+#define cpu_is_pxa168()	(0)
 #endif
 
+/* cpu_is_pxa910() is shared on both pxa910 and pxa920 */
 #ifdef CONFIG_CPU_PXA910
-#  define __cpu_is_pxa910(id)	\
-	({ unsigned int _id = ((id) >> 8) & 0xff; _id == 0x80; })
+static inline int cpu_is_pxa910(void)
+{
+	return (((read_cpuid_id() >> 8) & 0xff) == 0x84) &&
+		(((mmp_chip_id & 0xfff) == 0x910) ||
+		 ((mmp_chip_id & 0xfff) == 0x920));
+}
 #else
-#  define __cpu_is_pxa910(id)	(0)
+#define cpu_is_pxa910()	(0)
 #endif
 
 #ifdef CONFIG_CPU_MMP2
-#  define __cpu_is_mmp2(id)	\
-	({ unsigned int _id = ((id) >> 8) & 0xff; _id == 0x58; })
+static inline int cpu_is_mmp2(void)
+{
+	return (((cpu_readid_id() >> 8) & 0xff) == 0x58);
 #else
-#  define __cpu_is_mmp2(id)	(0)
+#define cpu_is_mmp2()	(0)
 #endif
 
-#define cpu_is_pxa168()		({ __cpu_is_pxa168(read_cpuid_id()); })
-#define cpu_is_pxa910()		({ __cpu_is_pxa910(read_cpuid_id()); })
-#define cpu_is_mmp2()		({ __cpu_is_mmp2(read_cpuid_id()); })
-
 #endif /* __ASM_MACH_CPUTYPE_H */
diff --git a/arch/arm/mach-mmp/include/mach/debug-macro.S b/arch/arm/mach-mmp/include/mach/debug-macro.S
index 76deff238e1..7e2ebd3efc7 100644
--- a/arch/arm/mach-mmp/include/mach/debug-macro.S
+++ b/arch/arm/mach-mmp/include/mach/debug-macro.S
@@ -11,12 +11,11 @@
 
 #include <mach/addr-map.h>
 
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1				@ MMU enabled?
-		ldreq	\rx, =APB_PHYS_BASE		@ physical
-		ldrne	\rx, =APB_VIRT_BASE		@ virtual
-		orr	\rx, \rx, #0x00017000
+		.macro	addruart, rp, rv
+		ldr	\rp, =APB_PHYS_BASE		@ physical
+		ldr	\rv, =APB_VIRT_BASE		@ virtual
+		orr	\rp, \rp, #0x00017000
+		orr	\rv, \rv, #0x00017000
 		.endm
 
 #define UART_SHIFT	2
diff --git a/arch/arm/mach-mmp/include/mach/irqs.h b/arch/arm/mach-mmp/include/mach/irqs.h
index b379cdec4d3..a09d328e2dd 100644
--- a/arch/arm/mach-mmp/include/mach/irqs.h
+++ b/arch/arm/mach-mmp/include/mach/irqs.h
@@ -222,10 +222,8 @@
 #define IRQ_GPIO_NUM			192
 #define IRQ_GPIO(x)			(IRQ_GPIO_START + (x))
 
-/* Board IRQ - 64 by default, increase if not enough */
 #define IRQ_BOARD_START			(IRQ_GPIO_START + IRQ_GPIO_NUM)
-#define IRQ_BOARD_END			(IRQ_BOARD_START + 64)
 
-#define NR_IRQS				(IRQ_BOARD_END)
+#define NR_IRQS				(IRQ_BOARD_START)
 
 #endif /* __ASM_MACH_IRQS_H */
diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
index ded43c455ec..4621067c772 100644
--- a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
@@ -289,4 +289,11 @@
 #define GPIO86_PWM1_OUT		MFP_CFG(GPIO86, AF2)
 #define GPIO86_PWM2_OUT		MFP_CFG(GPIO86, AF3)
 
+/* Keypad */
+#define GPIO109_KP_MKIN1        MFP_CFG(GPIO109, AF7)
+#define GPIO110_KP_MKIN0        MFP_CFG(GPIO110, AF7)
+#define GPIO111_KP_MKOUT7       MFP_CFG(GPIO111, AF7)
+#define GPIO112_KP_MKOUT6       MFP_CFG(GPIO112, AF7)
+#define GPIO121_KP_MKIN4        MFP_CFG(GPIO121, AF7)
+
 #endif /* __ASM_MACH_MFP_PXA168_H */
diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h
index 27e1bc75862..1801e420623 100644
--- a/arch/arm/mach-mmp/include/mach/pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/pxa168.h
@@ -5,11 +5,15 @@ struct sys_timer;
 
 extern struct sys_timer pxa168_timer;
 extern void __init pxa168_init_irq(void);
+extern void pxa168_clear_keypad_wakeup(void);
 
 #include <linux/i2c.h>
 #include <mach/devices.h>
 #include <plat/i2c.h>
 #include <plat/pxa3xx_nand.h>
+#include <video/pxa168fb.h>
+#include <plat/pxa27x_keypad.h>
+#include <mach/cputype.h>
 
 extern struct pxa_device_desc pxa168_device_uart1;
 extern struct pxa_device_desc pxa168_device_uart2;
@@ -25,6 +29,8 @@ extern struct pxa_device_desc pxa168_device_ssp3;
 extern struct pxa_device_desc pxa168_device_ssp4;
 extern struct pxa_device_desc pxa168_device_ssp5;
 extern struct pxa_device_desc pxa168_device_nand;
+extern struct pxa_device_desc pxa168_device_fb;
+extern struct pxa_device_desc pxa168_device_keypad;
 
 static inline int pxa168_add_uart(int id)
 {
@@ -97,4 +103,18 @@ static inline int pxa168_add_nand(struct pxa3xx_nand_platform_data *info)
 {
 	return pxa_register_device(&pxa168_device_nand, info, sizeof(*info));
 }
+
+static inline int pxa168_add_fb(struct pxa168fb_mach_info *mi)
+{
+	return pxa_register_device(&pxa168_device_fb, mi, sizeof(*mi));
+}
+
+static inline int pxa168_add_keypad(struct pxa27x_keypad_platform_data *data)
+{
+	if (cpu_is_pxa168())
+		data->clear_wakeup_event = pxa168_clear_keypad_wakeup;
+
+	return pxa_register_device(&pxa168_device_keypad, data, sizeof(*data));
+}
+
 #endif /* __ASM_MACH_PXA168_H */
diff --git a/arch/arm/mach-mmp/include/mach/regs-apmu.h b/arch/arm/mach-mmp/include/mach/regs-apmu.h
index 91903051412..ac4702357a6 100644
--- a/arch/arm/mach-mmp/include/mach/regs-apmu.h
+++ b/arch/arm/mach-mmp/include/mach/regs-apmu.h
@@ -33,4 +33,16 @@
 #define APMU_FNRST_DIS	(1 << 1)
 #define APMU_AXIRST_DIS	(1 << 0)
 
+/* Wake Clear Register */
+#define APMU_WAKE_CLR	APMU_REG(0x07c)
+
+#define APMU_PXA168_KP_WAKE_CLR		(1 << 7)
+#define APMU_PXA168_CFI_WAKE_CLR	(1 << 6)
+#define APMU_PXA168_XD_WAKE_CLR		(1 << 5)
+#define APMU_PXA168_MSP_WAKE_CLR	(1 << 4)
+#define APMU_PXA168_SD4_WAKE_CLR	(1 << 3)
+#define APMU_PXA168_SD3_WAKE_CLR	(1 << 2)
+#define APMU_PXA168_SD2_WAKE_CLR	(1 << 1)
+#define APMU_PXA168_SD1_WAKE_CLR	(1 << 0)
+
 #endif /* __ASM_MACH_REGS_APMU_H */
diff --git a/arch/arm/mach-mmp/include/mach/teton_bga.h b/arch/arm/mach-mmp/include/mach/teton_bga.h
new file mode 100644
index 00000000000..61a539b2cc9
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/teton_bga.h
@@ -0,0 +1,27 @@
+/*
+ *  linux/arch/arm/mach-mmp/include/mach/teton_bga.h
+ *
+ *  Support for the Marvell PXA168 Teton BGA Development Platform.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+#ifndef __ASM_MACH_TETON_BGA_H
+#define __ASM_MACH_TETON_BGA_H
+
+/* GPIOs */
+#define MMC_PWENA_GPIO		27
+#define USBHPENB_GPIO		55
+#define RTC_INT_GPIO		78
+#define LCD_VBLK_EN_GPIO	79
+#define LCD_DVDD_EN_GPIO	80
+#define RST_WIFI_GPIO		81
+#define CF_PWEN_GPIO		82
+#define USB_OC_GPIO		83
+#define PWM_GPIO		84
+#define USBHPENA_GPIO		85
+#define TS_INT_GPIO		86
+#define CIR_GPIO		108
+
+#endif /* __ASM_MACH_TETON_BGA_H */
diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c
index 80c3e7ab1e1..2a684fa5077 100644
--- a/arch/arm/mach-mmp/jasper.c
+++ b/arch/arm/mach-mmp/jasper.c
@@ -18,16 +18,18 @@
 #include <linux/regulator/machine.h>
 #include <linux/regulator/max8649.h>
 #include <linux/mfd/max8925.h>
+#include <linux/interrupt.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/addr-map.h>
 #include <mach/mfp-mmp2.h>
 #include <mach/mmp2.h>
-#include <mach/irqs.h>
 
 #include "common.h"
 
+#define JASPER_NR_IRQS		(IRQ_BOARD_START + 48)
+
 static unsigned long jasper_pin_config[] __initdata = {
 	/* UART1 */
 	GPIO29_UART1_RXD,
@@ -134,9 +136,8 @@ static void __init jasper_init(void)
 }
 
 MACHINE_START(MARVELL_JASPER, "Jasper Development Platform")
-	.phys_io        = APB_PHYS_BASE,
-	.io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
 	.map_io		= mmp_map_io,
+	.nr_irqs	= JASPER_NR_IRQS,
 	.init_irq       = mmp2_init_irq,
 	.timer          = &mmp2_timer,
 	.init_machine   = jasper_init,
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index 652ae660634..72b4e763158 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -77,8 +77,10 @@ static APBC_CLK(ssp2, PXA168_SSP2, 4, 0);
 static APBC_CLK(ssp3, PXA168_SSP3, 4, 0);
 static APBC_CLK(ssp4, PXA168_SSP4, 4, 0);
 static APBC_CLK(ssp5, PXA168_SSP5, 4, 0);
+static APBC_CLK(keypad, PXA168_KPC, 0, 32000);
 
 static APMU_CLK(nand, NAND, 0x01db, 208000000);
+static APMU_CLK(lcd, LCD, 0x7f, 312000000);
 
 /* device and clock bindings */
 static struct clk_lookup pxa168_clkregs[] = {
@@ -96,6 +98,8 @@ static struct clk_lookup pxa168_clkregs[] = {
 	INIT_CLKREG(&clk_ssp4, "pxa168-ssp.3", NULL),
 	INIT_CLKREG(&clk_ssp5, "pxa168-ssp.4", NULL),
 	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
+	INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL),
+	INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL),
 };
 
 static int __init pxa168_init(void)
@@ -132,6 +136,16 @@ struct sys_timer pxa168_timer = {
 	.init	= pxa168_timer_init,
 };
 
+void pxa168_clear_keypad_wakeup(void)
+{
+	uint32_t val;
+	uint32_t mask = APMU_PXA168_KP_WAKE_CLR;
+
+	/* wake event clear is needed in order to clear keypad interrupt */
+	val = __raw_readl(APMU_WAKE_CLR);
+	__raw_writel(val |  mask, APMU_WAKE_CLR);
+}
+
 /* on-chip devices */
 PXA168_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4017000, 0x30, 21, 22);
 PXA168_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4018000, 0x30, 23, 24);
@@ -147,3 +161,5 @@ PXA168_DEVICE(ssp2, "pxa168-ssp", 1, SSP2, 0xd401c000, 0x40, 54, 55);
 PXA168_DEVICE(ssp3, "pxa168-ssp", 2, SSP3, 0xd401f000, 0x40, 56, 57);
 PXA168_DEVICE(ssp4, "pxa168-ssp", 3, SSP4, 0xd4020000, 0x40, 58, 59);
 PXA168_DEVICE(ssp5, "pxa168-ssp", 4, SSP5, 0xd4021000, 0x40, 60, 61);
+PXA168_DEVICE(fb, "pxa168-fb", -1, LCD, 0xd420b000, 0x1c8);
+PXA168_DEVICE(keypad, "pxa27x-keypad", -1, KEYPAD, 0xd4012000, 0x4c);
diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c
index e81db742821..c296b75c445 100644
--- a/arch/arm/mach-mmp/tavorevb.c
+++ b/arch/arm/mach-mmp/tavorevb.c
@@ -99,8 +99,6 @@ static void __init tavorevb_init(void)
 }
 
 MACHINE_START(TAVOREVB, "PXA910 Evaluation Board (aka TavorEVB)")
-	.phys_io        = APB_PHYS_BASE,
-	.io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
 	.map_io		= mmp_map_io,
 	.init_irq       = pxa910_init_irq,
 	.timer          = &pxa910_timer,
diff --git a/arch/arm/mach-mmp/teton_bga.c b/arch/arm/mach-mmp/teton_bga.c
new file mode 100644
index 00000000000..bbe4727b96c
--- /dev/null
+++ b/arch/arm/mach-mmp/teton_bga.c
@@ -0,0 +1,89 @@
+/*
+ *  linux/arch/arm/mach-mmp/teton_bga.c
+ *
+ *  Support for the Marvell PXA168 Teton BGA Development Platform.
+ *
+ *  Author: Mark F. Brown <mark.brown314@gmail.com>
+ *
+ *  This code is based on aspenite.c
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <plat/pxa27x_keypad.h>
+#include <linux/i2c.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/addr-map.h>
+#include <mach/mfp-pxa168.h>
+#include <mach/pxa168.h>
+#include <mach/teton_bga.h>
+
+#include "common.h"
+
+static unsigned long teton_bga_pin_config[] __initdata = {
+	/* UART1 */
+	GPIO107_UART1_TXD,
+	GPIO108_UART1_RXD,
+
+	/* Keypad */
+	GPIO109_KP_MKIN1,
+	GPIO110_KP_MKIN0,
+	GPIO111_KP_MKOUT7,
+	GPIO112_KP_MKOUT6,
+
+	/* I2C Bus */
+	GPIO105_CI2C_SDA,
+	GPIO106_CI2C_SCL,
+
+	/* RTC */
+	GPIO78_GPIO,
+};
+
+static unsigned int teton_bga_matrix_key_map[] = {
+	KEY(0, 6, KEY_ESC),
+	KEY(0, 7, KEY_ENTER),
+	KEY(1, 6, KEY_LEFT),
+	KEY(1, 7, KEY_RIGHT),
+};
+
+static struct pxa27x_keypad_platform_data teton_bga_keypad_info __initdata = {
+	.matrix_key_rows        = 2,
+	.matrix_key_cols        = 8,
+	.matrix_key_map         = teton_bga_matrix_key_map,
+	.matrix_key_map_size    = ARRAY_SIZE(teton_bga_matrix_key_map),
+	.debounce_interval      = 30,
+};
+
+static struct i2c_board_info teton_bga_i2c_info[] __initdata = {
+	{
+		I2C_BOARD_INFO("ds1337", 0x68),
+		.irq = gpio_to_irq(RTC_INT_GPIO)
+	},
+};
+
+static void __init teton_bga_init(void)
+{
+	mfp_config(ARRAY_AND_SIZE(teton_bga_pin_config));
+
+	/* on-chip devices */
+	pxa168_add_uart(1);
+	pxa168_add_keypad(&teton_bga_keypad_info);
+	pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(teton_bga_i2c_info));
+}
+
+MACHINE_START(TETON_BGA, "PXA168-based Teton BGA Development Platform")
+	.map_io		= mmp_map_io,
+	.nr_irqs	= IRQ_BOARD_START,
+	.init_irq       = pxa168_init_irq,
+	.timer          = &pxa168_timer,
+	.init_machine   = teton_bga_init,
+MACHINE_END
diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
index ee65e05f0cf..e411039ea59 100644
--- a/arch/arm/mach-mmp/ttc_dkb.c
+++ b/arch/arm/mach-mmp/ttc_dkb.c
@@ -14,6 +14,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/onenand.h>
+#include <linux/interrupt.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -24,6 +25,8 @@
 
 #include "common.h"
 
+#define TTCDKB_NR_IRQS		(IRQ_BOARD_START + 24)
+
 static unsigned long ttc_dkb_pin_config[] __initdata = {
 	/* UART2 */
 	GPIO47_UART2_RXD,
@@ -122,9 +125,8 @@ static void __init ttc_dkb_init(void)
 }
 
 MACHINE_START(TTC_DKB, "PXA910-based TTC_DKB Development Platform")
-	.phys_io        = APB_PHYS_BASE,
-	.io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
 	.map_io		= mmp_map_io,
+	.nr_irqs	= TTCDKB_NR_IRQS,
 	.init_irq       = pxa910_init_irq,
 	.timer          = &pxa910_timer,
 	.init_machine   = ttc_dkb_init,
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index 47264a76eeb..3115a29dec4 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -10,6 +10,8 @@ config ARCH_MSM7X00A
 	select MSM_SMD
 	select MSM_SMD_PKG3
 	select CPU_V6
+	select MSM_PROC_COMM
+	select HAS_MSM_DEBUG_UART_PHYS
 
 config ARCH_MSM7X30
 	bool "MSM7x30"
@@ -18,6 +20,9 @@ config ARCH_MSM7X30
 	select MSM_VIC
 	select CPU_V7
 	select MSM_REMOTE_SPINLOCK_DEKKERS
+	select MSM_GPIOMUX
+	select MSM_PROC_COMM
+	select HAS_MSM_DEBUG_UART_PHYS
 
 config ARCH_QSD8X50
 	bool "QSD8X50"
@@ -26,6 +31,19 @@ config ARCH_QSD8X50
 	select MSM_VIC
 	select CPU_V7
 	select MSM_REMOTE_SPINLOCK_LDREX
+	select MSM_GPIOMUX
+	select MSM_PROC_COMM
+	select HAS_MSM_DEBUG_UART_PHYS
+
+config ARCH_MSM8X60
+	bool "MSM8X60"
+	select ARM_GIC
+	select CPU_V7
+	select MSM_V2_TLMM
+	select MSM_GPIOMUX
+	select MACH_MSM8X60_SURF if (!MACH_MSM8X60_RUMI3 && !MACH_MSM8X60_SIM \
+				  && !MACH_MSM8X60_FFA)
+
 endchoice
 
 config MSM_SOC_REV_A
@@ -36,6 +54,9 @@ config  ARCH_MSM_ARM11
 config  ARCH_MSM_SCORPION
 	bool
 
+config HAS_MSM_DEBUG_UART_PHYS
+	bool
+
 config  MSM_VIC
 	bool
 
@@ -74,6 +95,30 @@ config MACH_QSD8X50A_ST1_5
 	help
 	  Support for the Qualcomm ST1.5.
 
+config MACH_MSM8X60_RUMI3
+	depends on ARCH_MSM8X60
+	bool "MSM8x60 RUMI3"
+	help
+	  Support for the Qualcomm MSM8x60 RUMI3 emulator.
+
+config MACH_MSM8X60_SURF
+	depends on ARCH_MSM8X60
+	bool "MSM8x60 SURF"
+	help
+	  Support for the Qualcomm MSM8x60 SURF eval board.
+
+config MACH_MSM8X60_SIM
+	depends on ARCH_MSM8X60
+	bool "MSM8x60 Simulator"
+	help
+	  Support for the Qualcomm MSM8x60 simulator.
+
+config MACH_MSM8X60_FFA
+	depends on ARCH_MSM8X60
+	bool "MSM8x60 FFA"
+	help
+	  Support for the Qualcomm MSM8x60 FFA eval board.
+
 endmenu
 
 config MSM_DEBUG_UART
@@ -82,6 +127,7 @@ config MSM_DEBUG_UART
 	default 2 if MSM_DEBUG_UART2
 	default 3 if MSM_DEBUG_UART3
 
+if HAS_MSM_DEBUG_UART_PHYS
 choice
 	prompt "Debug UART"
 
@@ -99,11 +145,20 @@ choice
 	config MSM_DEBUG_UART3
 		bool "UART3"
 endchoice
+endif
 
 config MSM_SMD_PKG3
 	bool
 
+config MSM_PROC_COMM
+	bool
+
 config MSM_SMD
 	bool
 
+config MSM_GPIOMUX
+	bool
+
+config MSM_V2_TLMM
+	bool
 endif
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index 704610648a2..b5a7b07a44f 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -1,16 +1,20 @@
-obj-y += proc_comm.o
-obj-y += io.o idle.o timer.o dma.o
-obj-y += vreg.o
+obj-y += io.o idle.o timer.o
+ifndef CONFIG_ARCH_MSM8X60
 obj-y += acpuclock-arm11.o
-obj-y += clock.o clock-pcom.o
-obj-y += gpio.o
+obj-y += dma.o
+endif
 
 ifdef CONFIG_MSM_VIC
 obj-y += irq-vic.o
 else
+ifndef CONFIG_ARCH_MSM8X60
 obj-y += irq.o
 endif
+endif
 
+obj-$(CONFIG_ARCH_MSM8X60) += clock-dummy.o iommu.o iommu_dev.o devices-msm8x60-iommu.o
+obj-$(CONFIG_MSM_PROC_COMM) += proc_comm.o clock-pcom.o vreg.o
+obj-$(CONFIG_MSM_PROC_COMM) += clock.o
 obj-$(CONFIG_ARCH_QSD8X50) += sirc.o
 obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o
 obj-$(CONFIG_MSM_SMD) += last_radio_log.o
@@ -19,4 +23,11 @@ obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o d
 obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o
 obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o
 obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o
+obj-$(CONFIG_ARCH_MSM8X60) += board-msm8x60.o
 
+obj-$(CONFIG_ARCH_MSM7X30) += gpiomux-7x30.o gpiomux-v1.o gpiomux.o
+obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o gpiomux-v1.o gpiomux.o
+obj-$(CONFIG_ARCH_MSM8X60) += gpiomux-8x60.o gpiomux-v2.o gpiomux.o
+ifndef CONFIG_MSM_V2_TLMM
+obj-y	+= gpio.o
+endif
diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c
index 7bd72e8f127..59edecbe126 100644
--- a/arch/arm/mach-msm/board-halibut.c
+++ b/arch/arm/mach-msm/board-halibut.c
@@ -95,8 +95,6 @@ static void __init halibut_map_io(void)
 
 MACHINE_START(HALIBUT, "Halibut Board (QCT SURF7200A)")
 #ifdef CONFIG_MSM_DEBUG_UART
-	.phys_io        = MSM_DEBUG_UART_PHYS,
-	.io_pg_offst    = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
 #endif
 	.boot_params	= 0x10000100,
 	.fixup		= halibut_fixup,
diff --git a/arch/arm/mach-msm/board-mahimahi.c b/arch/arm/mach-msm/board-mahimahi.c
index bcbefdfe7b5..ef3ebf2f763 100644
--- a/arch/arm/mach-msm/board-mahimahi.c
+++ b/arch/arm/mach-msm/board-mahimahi.c
@@ -75,8 +75,6 @@ extern struct sys_timer msm_timer;
 
 MACHINE_START(MAHIMAHI, "mahimahi")
 #ifdef CONFIG_MSM_DEBUG_UART
-	.phys_io        = MSM_DEBUG_UART_PHYS,
-	.io_pg_offst    = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
 #endif
 	.boot_params	= 0x20000100,
 	.fixup		= mahimahi_fixup,
diff --git a/arch/arm/mach-msm/board-msm7x27.c b/arch/arm/mach-msm/board-msm7x27.c
index db9381b85bf..e7a76eff57d 100644
--- a/arch/arm/mach-msm/board-msm7x27.c
+++ b/arch/arm/mach-msm/board-msm7x27.c
@@ -131,8 +131,6 @@ static void __init msm7x2x_map_io(void)
 
 MACHINE_START(MSM7X27_SURF, "QCT MSM7x27 SURF")
 #ifdef CONFIG_MSM_DEBUG_UART
-	.phys_io        = MSM_DEBUG_UART_PHYS,
-	.io_pg_offst    = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
 #endif
 	.boot_params	= PHYS_OFFSET + 0x100,
 	.map_io		= msm7x2x_map_io,
@@ -143,8 +141,6 @@ MACHINE_END
 
 MACHINE_START(MSM7X27_FFA, "QCT MSM7x27 FFA")
 #ifdef CONFIG_MSM_DEBUG_UART
-	.phys_io        = MSM_DEBUG_UART_PHYS,
-	.io_pg_offst    = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
 #endif
 	.boot_params	= PHYS_OFFSET + 0x100,
 	.map_io		= msm7x2x_map_io,
@@ -155,8 +151,6 @@ MACHINE_END
 
 MACHINE_START(MSM7X25_SURF, "QCT MSM7x25 SURF")
 #ifdef CONFIG_MSM_DEBUG_UART
-	.phys_io        = MSM_DEBUG_UART_PHYS,
-	.io_pg_offst    = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
 #endif
 	.boot_params	= PHYS_OFFSET + 0x100,
 	.map_io		= msm7x2x_map_io,
@@ -167,8 +161,6 @@ MACHINE_END
 
 MACHINE_START(MSM7X25_FFA, "QCT MSM7x25 FFA")
 #ifdef CONFIG_MSM_DEBUG_UART
-	.phys_io        = MSM_DEBUG_UART_PHYS,
-	.io_pg_offst    = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
 #endif
 	.boot_params	= PHYS_OFFSET + 0x100,
 	.map_io		= msm7x2x_map_io,
diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c
index e32981928c7..05241df3f9b 100644
--- a/arch/arm/mach-msm/board-msm7x30.c
+++ b/arch/arm/mach-msm/board-msm7x30.c
@@ -39,27 +39,11 @@
 
 extern struct sys_timer msm_timer;
 
-#ifdef CONFIG_SERIAL_MSM_CONSOLE
-static struct msm_gpio uart2_config_data[] = {
-	{ GPIO_CFG(49, 2, GPIO_OUTPUT,  GPIO_PULL_DOWN, GPIO_2MA), "UART2_RFR"},
-	{ GPIO_CFG(50, 2, GPIO_INPUT,   GPIO_PULL_DOWN, GPIO_2MA), "UART2_CTS"},
-	{ GPIO_CFG(51, 2, GPIO_INPUT,   GPIO_PULL_DOWN, GPIO_2MA), "UART2_Rx"},
-	{ GPIO_CFG(52, 2, GPIO_OUTPUT,  GPIO_PULL_DOWN, GPIO_2MA), "UART2_Tx"},
-};
-
-static void msm7x30_init_uart2(void)
-{
-	msm_gpios_request_enable(uart2_config_data,
-			ARRAY_SIZE(uart2_config_data));
-
-}
-#endif
-
 static struct platform_device *devices[] __initdata = {
 #if defined(CONFIG_SERIAL_MSM) || defined(CONFIG_MSM_SERIAL_DEBUGGER)
         &msm_device_uart2,
 #endif
-
+	&msm_device_smd,
 };
 
 static void __init msm7x30_init_irq(void)
@@ -70,10 +54,6 @@ static void __init msm7x30_init_irq(void)
 static void __init msm7x30_init(void)
 {
 	platform_add_devices(devices, ARRAY_SIZE(devices));
-#ifdef CONFIG_SERIAL_MSM_CONSOLE
-	msm7x30_init_uart2();
-#endif
-
 }
 
 static void __init msm7x30_map_io(void)
@@ -84,8 +64,6 @@ static void __init msm7x30_map_io(void)
 
 MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF")
 #ifdef CONFIG_MSM_DEBUG_UART
-	.phys_io  = MSM_DEBUG_UART_PHYS,
-	.io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
 #endif
 	.boot_params = PHYS_OFFSET + 0x100,
 	.map_io = msm7x30_map_io,
@@ -96,8 +74,6 @@ MACHINE_END
 
 MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
 #ifdef CONFIG_MSM_DEBUG_UART
-	.phys_io  = MSM_DEBUG_UART_PHYS,
-	.io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
 #endif
 	.boot_params = PHYS_OFFSET + 0x100,
 	.map_io = msm7x30_map_io,
@@ -108,8 +84,6 @@ MACHINE_END
 
 MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID")
 #ifdef CONFIG_MSM_DEBUG_UART
-	.phys_io  = MSM_DEBUG_UART_PHYS,
-	.io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
 #endif
 	.boot_params = PHYS_OFFSET + 0x100,
 	.map_io = msm7x30_map_io,
diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c
new file mode 100644
index 00000000000..7486a681cc7
--- /dev/null
+++ b/arch/arm/mach-msm/board-msm8x60.c
@@ -0,0 +1,100 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
+
+#include <mach/board.h>
+#include <mach/msm_iomap.h>
+
+void __iomem *gic_cpu_base_addr;
+
+unsigned long clk_get_max_axi_khz(void)
+{
+	return 0;
+}
+
+static void __init msm8x60_map_io(void)
+{
+	msm_map_msm8x60_io();
+}
+
+static void __init msm8x60_init_irq(void)
+{
+	unsigned int i;
+
+	gic_dist_init(0, MSM_QGIC_DIST_BASE, GIC_PPI_START);
+	gic_cpu_base_addr = (void *)MSM_QGIC_CPU_BASE;
+	gic_cpu_init(0, MSM_QGIC_CPU_BASE);
+
+	/* Edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */
+	writel(0xFFFFD7FF, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4);
+
+	/* RUMI does not adhere to GIC spec by enabling STIs by default.
+	 * Enable/clear is supposed to be RO for STIs, but is RW on RUMI.
+	 */
+	if (!machine_is_msm8x60_sim())
+		writel(0x0000FFFF, MSM_QGIC_DIST_BASE + GIC_DIST_ENABLE_SET);
+
+	/* FIXME: Not installing AVS_SVICINT and AVS_SVICINTSWDONE yet
+	 * as they are configured as level, which does not play nice with
+	 * handle_percpu_irq.
+	 */
+	for (i = GIC_PPI_START; i < GIC_SPI_START; i++) {
+		if (i != AVS_SVICINT && i != AVS_SVICINTSWDONE)
+			set_irq_handler(i, handle_percpu_irq);
+	}
+}
+
+static void __init msm8x60_init(void)
+{
+}
+
+MACHINE_START(MSM8X60_RUMI3, "QCT MSM8X60 RUMI3")
+	.map_io = msm8x60_map_io,
+	.init_irq = msm8x60_init_irq,
+	.init_machine = msm8x60_init,
+	.timer = &msm_timer,
+MACHINE_END
+
+MACHINE_START(MSM8X60_SURF, "QCT MSM8X60 SURF")
+	.map_io = msm8x60_map_io,
+	.init_irq = msm8x60_init_irq,
+	.init_machine = msm8x60_init,
+	.timer = &msm_timer,
+MACHINE_END
+
+MACHINE_START(MSM8X60_SIM, "QCT MSM8X60 SIMULATOR")
+	.map_io = msm8x60_map_io,
+	.init_irq = msm8x60_init_irq,
+	.init_machine = msm8x60_init,
+	.timer = &msm_timer,
+MACHINE_END
+
+MACHINE_START(MSM8X60_FFA, "QCT MSM8X60 FFA")
+	.map_io = msm8x60_map_io,
+	.init_irq = msm8x60_init_irq,
+	.init_machine = msm8x60_init,
+	.timer = &msm_timer,
+MACHINE_END
diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c
index e3cc80792d6..ed2af4ad97e 100644
--- a/arch/arm/mach-msm/board-qsd8x50.c
+++ b/arch/arm/mach-msm/board-qsd8x50.c
@@ -35,20 +35,49 @@
 
 extern struct sys_timer msm_timer;
 
-static struct msm_gpio uart3_config_data[] = {
-	{ GPIO_CFG(86, 1, GPIO_INPUT,   GPIO_PULL_DOWN, GPIO_2MA), "UART2_Rx"},
-	{ GPIO_CFG(87, 1, GPIO_OUTPUT,  GPIO_PULL_DOWN, GPIO_2MA), "UART2_Tx"},
+static const resource_size_t qsd8x50_surf_smc91x_base __initdata = 0x70000300;
+static const unsigned        qsd8x50_surf_smc91x_gpio __initdata = 156;
+
+/* Leave smc91x resources empty here, as we'll fill them in
+ * at run-time: they vary from board to board, and the true
+ * configuration won't be known until boot.
+ */
+static struct resource smc91x_resources[] __initdata = {
+	[0] = {
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.flags = IORESOURCE_IRQ,
+	},
 };
 
-static struct platform_device *devices[] __initdata = {
-	&msm_device_uart3,
+static struct platform_device smc91x_device __initdata = {
+	.name           = "smc91x",
+	.id             = 0,
+	.num_resources  = ARRAY_SIZE(smc91x_resources),
+	.resource       = smc91x_resources,
 };
 
-static void msm8x50_init_uart3(void)
+static int __init msm_init_smc91x(void)
 {
-	msm_gpios_request_enable(uart3_config_data,
-				ARRAY_SIZE(uart3_config_data));
+	if (machine_is_qsd8x50_surf()) {
+		smc91x_resources[0].start = qsd8x50_surf_smc91x_base;
+		smc91x_resources[0].end   = qsd8x50_surf_smc91x_base + 0xff;
+		smc91x_resources[1].start =
+			gpio_to_irq(qsd8x50_surf_smc91x_gpio);
+		smc91x_resources[1].end   =
+			gpio_to_irq(qsd8x50_surf_smc91x_gpio);
+		platform_device_register(&smc91x_device);
+	}
+
+	return 0;
 }
+module_init(msm_init_smc91x);
+
+static struct platform_device *devices[] __initdata = {
+	&msm_device_uart3,
+	&msm_device_smd,
+};
 
 static void __init qsd8x50_map_io(void)
 {
@@ -64,14 +93,11 @@ static void __init qsd8x50_init_irq(void)
 
 static void __init qsd8x50_init(void)
 {
-	msm8x50_init_uart3();
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
 MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF")
 #ifdef CONFIG_MSM_DEBUG_UART
-	.phys_io  = MSM_DEBUG_UART_PHYS,
-	.io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
 #endif
 	.boot_params = PHYS_OFFSET + 0x100,
 	.map_io = qsd8x50_map_io,
@@ -82,8 +108,6 @@ MACHINE_END
 
 MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5")
 #ifdef CONFIG_MSM_DEBUG_UART
-	.phys_io  = MSM_DEBUG_UART_PHYS,
-	.io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
 #endif
 	.boot_params = PHYS_OFFSET + 0x100,
 	.map_io = qsd8x50_map_io,
diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c
index 2bc1b9d5623..8919ffb1719 100644
--- a/arch/arm/mach-msm/board-sapphire.c
+++ b/arch/arm/mach-msm/board-sapphire.c
@@ -106,8 +106,6 @@ static void __init sapphire_map_io(void)
 MACHINE_START(SAPPHIRE, "sapphire")
 /* Maintainer: Brian Swetland <swetland@google.com> */
 #ifdef CONFIG_MSM_DEBUG_UART
-	.phys_io        = MSM_DEBUG_UART_PHYS,
-	.io_pg_offst    = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
 #endif
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.fixup          = sapphire_fixup,
diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c
index 469e0be3499..73f14606654 100644
--- a/arch/arm/mach-msm/board-trout.c
+++ b/arch/arm/mach-msm/board-trout.c
@@ -93,8 +93,6 @@ static void __init trout_map_io(void)
 
 MACHINE_START(TROUT, "HTC Dream")
 #ifdef CONFIG_MSM_DEBUG_UART
-	.phys_io	= MSM_DEBUG_UART_PHYS,
-	.io_pg_offst	= ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
 #endif
 	.boot_params	= 0x10000100,
 	.fixup		= trout_fixup,
diff --git a/arch/arm/mach-msm/clock-dummy.c b/arch/arm/mach-msm/clock-dummy.c
new file mode 100644
index 00000000000..1250d22082e
--- /dev/null
+++ b/arch/arm/mach-msm/clock-dummy.c
@@ -0,0 +1,54 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ */
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/module.h>
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+	return ERR_PTR(-ENOENT);
+}
+EXPORT_SYMBOL(clk_get);
+
+int clk_enable(struct clk *clk)
+{
+	return -ENOENT;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return 0;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	return -ENOENT;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+void clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_put);
diff --git a/arch/arm/mach-msm/devices-msm7x30.c b/arch/arm/mach-msm/devices-msm7x30.c
index b449e8ad290..7fcf2e3b769 100644
--- a/arch/arm/mach-msm/devices-msm7x30.c
+++ b/arch/arm/mach-msm/devices-msm7x30.c
@@ -51,6 +51,11 @@ struct platform_device msm_device_uart2 = {
 	.resource	= resources_uart2,
 };
 
+struct platform_device msm_device_smd = {
+	.name   = "msm_smd",
+	.id     = -1,
+};
+
 struct clk msm_clocks_7x30[] = {
 	CLK_PCOM("adm_clk",	ADM_CLK,	NULL, 0),
 	CLK_PCOM("adsp_clk",	ADSP_CLK,	NULL, 0),
diff --git a/arch/arm/mach-msm/devices-msm8x60-iommu.c b/arch/arm/mach-msm/devices-msm8x60-iommu.c
new file mode 100644
index 00000000000..89b9d4437e9
--- /dev/null
+++ b/arch/arm/mach-msm/devices-msm8x60-iommu.c
@@ -0,0 +1,883 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/bootmem.h>
+
+#include <mach/msm_iomap-8x60.h>
+#include <mach/irqs-8x60.h>
+#include <mach/iommu.h>
+
+static struct resource msm_iommu_jpegd_resources[] = {
+	{
+		.start = MSM_IOMMU_JPEGD_PHYS,
+		.end   = MSM_IOMMU_JPEGD_PHYS + MSM_IOMMU_JPEGD_SIZE - 1,
+		.name  = "physbase",
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name = "nonsecure_irq",
+		.start = SMMU_JPEGD_CB_SC_NON_SECURE_IRQ,
+		.end   = SMMU_JPEGD_CB_SC_NON_SECURE_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "secure_irq",
+		.start = SMMU_JPEGD_CB_SC_SECURE_IRQ,
+		.end   = SMMU_JPEGD_CB_SC_SECURE_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource msm_iommu_vpe_resources[] = {
+	{
+		.start = MSM_IOMMU_VPE_PHYS,
+		.end   = MSM_IOMMU_VPE_PHYS + MSM_IOMMU_VPE_SIZE - 1,
+		.name  = "physbase",
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name = "nonsecure_irq",
+		.start = SMMU_VPE_CB_SC_NON_SECURE_IRQ,
+		.end   = SMMU_VPE_CB_SC_NON_SECURE_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "secure_irq",
+		.start = SMMU_VPE_CB_SC_SECURE_IRQ,
+		.end   = SMMU_VPE_CB_SC_SECURE_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource msm_iommu_mdp0_resources[] = {
+	{
+		.start = MSM_IOMMU_MDP0_PHYS,
+		.end   = MSM_IOMMU_MDP0_PHYS + MSM_IOMMU_MDP0_SIZE - 1,
+		.name  = "physbase",
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name = "nonsecure_irq",
+		.start = SMMU_MDP0_CB_SC_NON_SECURE_IRQ,
+		.end   = SMMU_MDP0_CB_SC_NON_SECURE_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "secure_irq",
+		.start = SMMU_MDP0_CB_SC_SECURE_IRQ,
+		.end   = SMMU_MDP0_CB_SC_SECURE_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource msm_iommu_mdp1_resources[] = {
+	{
+		.start = MSM_IOMMU_MDP1_PHYS,
+		.end   = MSM_IOMMU_MDP1_PHYS + MSM_IOMMU_MDP1_SIZE - 1,
+		.name  = "physbase",
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name = "nonsecure_irq",
+		.start = SMMU_MDP1_CB_SC_NON_SECURE_IRQ,
+		.end   = SMMU_MDP1_CB_SC_NON_SECURE_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "secure_irq",
+		.start = SMMU_MDP1_CB_SC_SECURE_IRQ,
+		.end   = SMMU_MDP1_CB_SC_SECURE_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource msm_iommu_rot_resources[] = {
+	{
+		.start = MSM_IOMMU_ROT_PHYS,
+		.end   = MSM_IOMMU_ROT_PHYS + MSM_IOMMU_ROT_SIZE - 1,
+		.name  = "physbase",
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name = "nonsecure_irq",
+		.start = SMMU_ROT_CB_SC_NON_SECURE_IRQ,
+		.end   = SMMU_ROT_CB_SC_NON_SECURE_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "secure_irq",
+		.start = SMMU_ROT_CB_SC_SECURE_IRQ,
+		.end   = SMMU_ROT_CB_SC_SECURE_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource msm_iommu_ijpeg_resources[] = {
+	{
+		.start = MSM_IOMMU_IJPEG_PHYS,
+		.end   = MSM_IOMMU_IJPEG_PHYS + MSM_IOMMU_IJPEG_SIZE - 1,
+		.name  = "physbase",
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name = "nonsecure_irq",
+		.start = SMMU_IJPEG_CB_SC_NON_SECURE_IRQ,
+		.end   = SMMU_IJPEG_CB_SC_NON_SECURE_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "secure_irq",
+		.start = SMMU_IJPEG_CB_SC_SECURE_IRQ,
+		.end   = SMMU_IJPEG_CB_SC_SECURE_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource msm_iommu_vfe_resources[] = {
+	{
+		.start = MSM_IOMMU_VFE_PHYS,
+		.end   = MSM_IOMMU_VFE_PHYS + MSM_IOMMU_VFE_SIZE - 1,
+		.name  = "physbase",
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name = "nonsecure_irq",
+		.start = SMMU_VFE_CB_SC_NON_SECURE_IRQ,
+		.end   = SMMU_VFE_CB_SC_NON_SECURE_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "secure_irq",
+		.start = SMMU_VFE_CB_SC_SECURE_IRQ,
+		.end   = SMMU_VFE_CB_SC_SECURE_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource msm_iommu_vcodec_a_resources[] = {
+	{
+		.start = MSM_IOMMU_VCODEC_A_PHYS,
+		.end   = MSM_IOMMU_VCODEC_A_PHYS + MSM_IOMMU_VCODEC_A_SIZE - 1,
+		.name  = "physbase",
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name = "nonsecure_irq",
+		.start = SMMU_VCODEC_A_CB_SC_NON_SECURE_IRQ,
+		.end   = SMMU_VCODEC_A_CB_SC_NON_SECURE_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "secure_irq",
+		.start = SMMU_VCODEC_A_CB_SC_SECURE_IRQ,
+		.end   = SMMU_VCODEC_A_CB_SC_SECURE_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource msm_iommu_vcodec_b_resources[] = {
+	{
+		.start = MSM_IOMMU_VCODEC_B_PHYS,
+		.end   = MSM_IOMMU_VCODEC_B_PHYS + MSM_IOMMU_VCODEC_B_SIZE - 1,
+		.name  = "physbase",
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name = "nonsecure_irq",
+		.start = SMMU_VCODEC_B_CB_SC_NON_SECURE_IRQ,
+		.end   = SMMU_VCODEC_B_CB_SC_NON_SECURE_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "secure_irq",
+		.start = SMMU_VCODEC_B_CB_SC_SECURE_IRQ,
+		.end   = SMMU_VCODEC_B_CB_SC_SECURE_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource msm_iommu_gfx3d_resources[] = {
+	{
+		.start = MSM_IOMMU_GFX3D_PHYS,
+		.end   = MSM_IOMMU_GFX3D_PHYS + MSM_IOMMU_GFX3D_SIZE - 1,
+		.name  = "physbase",
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name = "nonsecure_irq",
+		.start = SMMU_GFX3D_CB_SC_NON_SECURE_IRQ,
+		.end   = SMMU_GFX3D_CB_SC_NON_SECURE_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "secure_irq",
+		.start = SMMU_GFX3D_CB_SC_SECURE_IRQ,
+		.end   = SMMU_GFX3D_CB_SC_SECURE_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource msm_iommu_gfx2d0_resources[] = {
+	{
+		.start = MSM_IOMMU_GFX2D0_PHYS,
+		.end   = MSM_IOMMU_GFX2D0_PHYS + MSM_IOMMU_GFX2D0_SIZE - 1,
+		.name  = "physbase",
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name = "nonsecure_irq",
+		.start = SMMU_GFX2D0_CB_SC_NON_SECURE_IRQ,
+		.end   = SMMU_GFX2D0_CB_SC_NON_SECURE_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "secure_irq",
+		.start = SMMU_GFX2D0_CB_SC_SECURE_IRQ,
+		.end   = SMMU_GFX2D0_CB_SC_SECURE_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device msm_root_iommu_dev = {
+	.name = "msm_iommu",
+	.id = -1,
+};
+
+static struct msm_iommu_dev jpegd_smmu = {
+	.name = "jpegd",
+	.clk_rate = -1
+};
+
+static struct msm_iommu_dev vpe_smmu = {
+	.name = "vpe"
+};
+
+static struct msm_iommu_dev mdp0_smmu = {
+	.name = "mdp0"
+};
+
+static struct msm_iommu_dev mdp1_smmu = {
+	.name = "mdp1"
+};
+
+static struct msm_iommu_dev rot_smmu = {
+	.name = "rot"
+};
+
+static struct msm_iommu_dev ijpeg_smmu = {
+	.name = "ijpeg"
+};
+
+static struct msm_iommu_dev vfe_smmu = {
+	.name = "vfe",
+	.clk_rate = -1
+};
+
+static struct msm_iommu_dev vcodec_a_smmu = {
+	.name = "vcodec_a"
+};
+
+static struct msm_iommu_dev vcodec_b_smmu = {
+	.name = "vcodec_b"
+};
+
+static struct msm_iommu_dev gfx3d_smmu = {
+	.name = "gfx3d",
+	.clk_rate = 27000000
+};
+
+static struct msm_iommu_dev gfx2d0_smmu = {
+	.name = "gfx2d0",
+	.clk_rate = 27000000
+};
+
+static struct platform_device msm_device_smmu_jpegd = {
+	.name = "msm_iommu",
+	.id = 0,
+	.dev = {
+		.parent = &msm_root_iommu_dev.dev,
+	},
+	.num_resources = ARRAY_SIZE(msm_iommu_jpegd_resources),
+	.resource = msm_iommu_jpegd_resources,
+};
+
+static struct platform_device msm_device_smmu_vpe = {
+	.name = "msm_iommu",
+	.id = 1,
+	.dev = {
+		.parent = &msm_root_iommu_dev.dev,
+	},
+	.num_resources = ARRAY_SIZE(msm_iommu_vpe_resources),
+	.resource = msm_iommu_vpe_resources,
+};
+
+static struct platform_device msm_device_smmu_mdp0 = {
+	.name = "msm_iommu",
+	.id = 2,
+	.dev = {
+		.parent = &msm_root_iommu_dev.dev,
+	},
+	.num_resources = ARRAY_SIZE(msm_iommu_mdp0_resources),
+	.resource = msm_iommu_mdp0_resources,
+};
+
+static struct platform_device msm_device_smmu_mdp1 = {
+	.name = "msm_iommu",
+	.id = 3,
+	.dev = {
+		.parent = &msm_root_iommu_dev.dev,
+	},
+	.num_resources = ARRAY_SIZE(msm_iommu_mdp1_resources),
+	.resource = msm_iommu_mdp1_resources,
+};
+
+static struct platform_device msm_device_smmu_rot = {
+	.name = "msm_iommu",
+	.id = 4,
+	.dev = {
+		.parent = &msm_root_iommu_dev.dev,
+	},
+	.num_resources = ARRAY_SIZE(msm_iommu_rot_resources),
+	.resource = msm_iommu_rot_resources,
+};
+
+static struct platform_device msm_device_smmu_ijpeg = {
+	.name = "msm_iommu",
+	.id = 5,
+	.dev = {
+		.parent = &msm_root_iommu_dev.dev,
+	},
+	.num_resources = ARRAY_SIZE(msm_iommu_ijpeg_resources),
+	.resource = msm_iommu_ijpeg_resources,
+};
+
+static struct platform_device msm_device_smmu_vfe = {
+	.name = "msm_iommu",
+	.id = 6,
+	.dev = {
+		.parent = &msm_root_iommu_dev.dev,
+	},
+	.num_resources = ARRAY_SIZE(msm_iommu_vfe_resources),
+	.resource = msm_iommu_vfe_resources,
+};
+
+static struct platform_device msm_device_smmu_vcodec_a = {
+	.name = "msm_iommu",
+	.id = 7,
+	.dev = {
+		.parent = &msm_root_iommu_dev.dev,
+	},
+	.num_resources = ARRAY_SIZE(msm_iommu_vcodec_a_resources),
+	.resource = msm_iommu_vcodec_a_resources,
+};
+
+static struct platform_device msm_device_smmu_vcodec_b = {
+	.name = "msm_iommu",
+	.id = 8,
+	.dev = {
+		.parent = &msm_root_iommu_dev.dev,
+	},
+	.num_resources = ARRAY_SIZE(msm_iommu_vcodec_b_resources),
+	.resource = msm_iommu_vcodec_b_resources,
+};
+
+static struct platform_device msm_device_smmu_gfx3d = {
+	.name = "msm_iommu",
+	.id = 9,
+	.dev = {
+		.parent = &msm_root_iommu_dev.dev,
+	},
+	.num_resources = ARRAY_SIZE(msm_iommu_gfx3d_resources),
+	.resource = msm_iommu_gfx3d_resources,
+};
+
+static struct platform_device msm_device_smmu_gfx2d0 = {
+	.name = "msm_iommu",
+	.id = 10,
+	.dev = {
+		.parent = &msm_root_iommu_dev.dev,
+	},
+	.num_resources = ARRAY_SIZE(msm_iommu_gfx2d0_resources),
+	.resource = msm_iommu_gfx2d0_resources,
+};
+
+static struct msm_iommu_ctx_dev jpegd_src_ctx = {
+	.name = "jpegd_src",
+	.num = 0,
+	.mids = {0, -1}
+};
+
+static struct msm_iommu_ctx_dev jpegd_dst_ctx = {
+	.name = "jpegd_dst",
+	.num = 1,
+	.mids = {1, -1}
+};
+
+static struct msm_iommu_ctx_dev vpe_src_ctx = {
+	.name = "vpe_src",
+	.num = 0,
+	.mids = {0, -1}
+};
+
+static struct msm_iommu_ctx_dev vpe_dst_ctx = {
+	.name = "vpe_dst",
+	.num = 1,
+	.mids = {1, -1}
+};
+
+static struct msm_iommu_ctx_dev mdp_vg1_ctx = {
+	.name = "mdp_vg1",
+	.num = 0,
+	.mids = {0, 2, -1}
+};
+
+static struct msm_iommu_ctx_dev mdp_rgb1_ctx = {
+	.name = "mdp_rgb1",
+	.num = 1,
+	.mids = {1, 3, 4, 5, 6, 7, 8, 9, 10, -1}
+};
+
+static struct msm_iommu_ctx_dev mdp_vg2_ctx = {
+	.name = "mdp_vg2",
+	.num = 0,
+	.mids = {0, 2, -1}
+};
+
+static struct msm_iommu_ctx_dev mdp_rgb2_ctx = {
+	.name = "mdp_rgb2",
+	.num = 1,
+	.mids = {1, 3, 4, 5, 6, 7, 8, 9, 10, -1}
+};
+
+static struct msm_iommu_ctx_dev rot_src_ctx = {
+	.name = "rot_src",
+	.num = 0,
+	.mids = {0, -1}
+};
+
+static struct msm_iommu_ctx_dev rot_dst_ctx = {
+	.name = "rot_dst",
+	.num = 1,
+	.mids = {1, -1}
+};
+
+static struct msm_iommu_ctx_dev ijpeg_src_ctx = {
+	.name = "ijpeg_src",
+	.num = 0,
+	.mids = {0, -1}
+};
+
+static struct msm_iommu_ctx_dev ijpeg_dst_ctx = {
+	.name = "ijpeg_dst",
+	.num = 1,
+	.mids = {1, -1}
+};
+
+static struct msm_iommu_ctx_dev vfe_imgwr_ctx = {
+	.name = "vfe_imgwr",
+	.num = 0,
+	.mids = {2, 3, 4, 5, 6, 7, 8, -1}
+};
+
+static struct msm_iommu_ctx_dev vfe_misc_ctx = {
+	.name = "vfe_misc",
+	.num = 1,
+	.mids = {0, 1, 9, -1}
+};
+
+static struct msm_iommu_ctx_dev vcodec_a_stream_ctx = {
+	.name = "vcodec_a_stream",
+	.num = 0,
+	.mids = {2, 5, -1}
+};
+
+static struct msm_iommu_ctx_dev vcodec_a_mm1_ctx = {
+	.name = "vcodec_a_mm1",
+	.num = 1,
+	.mids = {0, 1, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, -1}
+};
+
+static struct msm_iommu_ctx_dev vcodec_b_mm2_ctx = {
+	.name = "vcodec_b_mm2",
+	.num = 0,
+	.mids = {0, 1, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, -1}
+};
+
+static struct msm_iommu_ctx_dev gfx3d_rbpa_ctx = {
+	.name = "gfx3d_rbpa",
+	.num = 0,
+	.mids = {-1}
+};
+
+static struct msm_iommu_ctx_dev gfx3d_cpvgttc_ctx = {
+	.name = "gfx3d_cpvgttc",
+	.num = 1,
+	.mids = {0, 1, 2, 3, 4, 5, 6, 7, -1}
+};
+
+static struct msm_iommu_ctx_dev gfx3d_smmu_ctx = {
+	.name = "gfx3d_smmu",
+	.num = 2,
+	.mids = {8, 9, 10, 11, 12, -1}
+};
+
+static struct msm_iommu_ctx_dev gfx2d0_pixv1_ctx = {
+	.name = "gfx2d0_pixv1_smmu",
+	.num = 0,
+	.mids = {0, 3, 4, -1}
+};
+
+static struct msm_iommu_ctx_dev gfx2d0_texv3_ctx = {
+	.name = "gfx2d0_texv3_smmu",
+	.num = 1,
+	.mids = {1, 6, 7, -1}
+};
+
+static struct platform_device msm_device_jpegd_src_ctx = {
+	.name = "msm_iommu_ctx",
+	.id = 0,
+	.dev = {
+		.parent = &msm_device_smmu_jpegd.dev,
+	},
+};
+
+static struct platform_device msm_device_jpegd_dst_ctx = {
+	.name = "msm_iommu_ctx",
+	.id = 1,
+	.dev = {
+		.parent = &msm_device_smmu_jpegd.dev,
+	},
+};
+
+static struct platform_device msm_device_vpe_src_ctx = {
+	.name = "msm_iommu_ctx",
+	.id = 2,
+	.dev = {
+		.parent = &msm_device_smmu_vpe.dev,
+	},
+};
+
+static struct platform_device msm_device_vpe_dst_ctx = {
+	.name = "msm_iommu_ctx",
+	.id = 3,
+	.dev = {
+		.parent = &msm_device_smmu_vpe.dev,
+	},
+};
+
+static struct platform_device msm_device_mdp_vg1_ctx = {
+	.name = "msm_iommu_ctx",
+	.id = 4,
+	.dev = {
+		.parent = &msm_device_smmu_mdp0.dev,
+	},
+};
+
+static struct platform_device msm_device_mdp_rgb1_ctx = {
+	.name = "msm_iommu_ctx",
+	.id = 5,
+	.dev = {
+		.parent = &msm_device_smmu_mdp0.dev,
+	},
+};
+
+static struct platform_device msm_device_mdp_vg2_ctx = {
+	.name = "msm_iommu_ctx",
+	.id = 6,
+	.dev = {
+		.parent = &msm_device_smmu_mdp1.dev,
+	},
+};
+
+static struct platform_device msm_device_mdp_rgb2_ctx = {
+	.name = "msm_iommu_ctx",
+	.id = 7,
+	.dev = {
+		.parent = &msm_device_smmu_mdp1.dev,
+	},
+};
+
+static struct platform_device msm_device_rot_src_ctx = {
+	.name = "msm_iommu_ctx",
+	.id = 8,
+	.dev = {
+		.parent = &msm_device_smmu_rot.dev,
+	},
+};
+
+static struct platform_device msm_device_rot_dst_ctx = {
+	.name = "msm_iommu_ctx",
+	.id = 9,
+	.dev = {
+		.parent = &msm_device_smmu_rot.dev,
+	},
+};
+
+static struct platform_device msm_device_ijpeg_src_ctx = {
+	.name = "msm_iommu_ctx",
+	.id = 10,
+	.dev = {
+		.parent = &msm_device_smmu_ijpeg.dev,
+	},
+};
+
+static struct platform_device msm_device_ijpeg_dst_ctx = {
+	.name = "msm_iommu_ctx",
+	.id = 11,
+	.dev = {
+		.parent = &msm_device_smmu_ijpeg.dev,
+	},
+};
+
+static struct platform_device msm_device_vfe_imgwr_ctx = {
+	.name = "msm_iommu_ctx",
+	.id = 12,
+	.dev = {
+		.parent = &msm_device_smmu_vfe.dev,
+	},
+};
+
+static struct platform_device msm_device_vfe_misc_ctx = {
+	.name = "msm_iommu_ctx",
+	.id = 13,
+	.dev = {
+		.parent = &msm_device_smmu_vfe.dev,
+	},
+};
+
+static struct platform_device msm_device_vcodec_a_stream_ctx = {
+	.name = "msm_iommu_ctx",
+	.id = 14,
+	.dev = {
+		.parent = &msm_device_smmu_vcodec_a.dev,
+	},
+};
+
+static struct platform_device msm_device_vcodec_a_mm1_ctx = {
+	.name = "msm_iommu_ctx",
+	.id = 15,
+	.dev = {
+		.parent = &msm_device_smmu_vcodec_a.dev,
+	},
+};
+
+static struct platform_device msm_device_vcodec_b_mm2_ctx = {
+	.name = "msm_iommu_ctx",
+	.id = 16,
+	.dev = {
+		.parent = &msm_device_smmu_vcodec_b.dev,
+	},
+};
+
+static struct platform_device msm_device_gfx3d_rbpa_ctx = {
+	.name = "msm_iommu_ctx",
+	.id = 17,
+	.dev = {
+		.parent = &msm_device_smmu_gfx3d.dev,
+	},
+};
+
+static struct platform_device msm_device_gfx3d_cpvgttc_ctx = {
+	.name = "msm_iommu_ctx",
+	.id = 18,
+	.dev = {
+		.parent = &msm_device_smmu_gfx3d.dev,
+	},
+};
+
+static struct platform_device msm_device_gfx3d_smmu_ctx = {
+	.name = "msm_iommu_ctx",
+	.id = 19,
+	.dev = {
+		.parent = &msm_device_smmu_gfx3d.dev,
+	},
+};
+
+static struct platform_device msm_device_gfx2d0_pixv1_ctx = {
+	.name = "msm_iommu_ctx",
+	.id = 20,
+	.dev = {
+		.parent = &msm_device_smmu_gfx2d0.dev,
+	},
+};
+
+static struct platform_device msm_device_gfx2d0_texv3_ctx = {
+	.name = "msm_iommu_ctx",
+	.id = 21,
+	.dev = {
+		.parent = &msm_device_smmu_gfx2d0.dev,
+	},
+};
+
+static struct platform_device *msm_iommu_devs[] = {
+	&msm_device_smmu_jpegd,
+	&msm_device_smmu_vpe,
+	&msm_device_smmu_mdp0,
+	&msm_device_smmu_mdp1,
+	&msm_device_smmu_rot,
+	&msm_device_smmu_ijpeg,
+	&msm_device_smmu_vfe,
+	&msm_device_smmu_vcodec_a,
+	&msm_device_smmu_vcodec_b,
+	&msm_device_smmu_gfx3d,
+	&msm_device_smmu_gfx2d0,
+};
+
+static struct msm_iommu_dev *msm_iommu_data[] = {
+	&jpegd_smmu,
+	&vpe_smmu,
+	&mdp0_smmu,
+	&mdp1_smmu,
+	&rot_smmu,
+	&ijpeg_smmu,
+	&vfe_smmu,
+	&vcodec_a_smmu,
+	&vcodec_b_smmu,
+	&gfx3d_smmu,
+	&gfx2d0_smmu,
+};
+
+static struct platform_device *msm_iommu_ctx_devs[] = {
+	&msm_device_jpegd_src_ctx,
+	&msm_device_jpegd_dst_ctx,
+	&msm_device_vpe_src_ctx,
+	&msm_device_vpe_dst_ctx,
+	&msm_device_mdp_vg1_ctx,
+	&msm_device_mdp_rgb1_ctx,
+	&msm_device_mdp_vg2_ctx,
+	&msm_device_mdp_rgb2_ctx,
+	&msm_device_rot_src_ctx,
+	&msm_device_rot_dst_ctx,
+	&msm_device_ijpeg_src_ctx,
+	&msm_device_ijpeg_dst_ctx,
+	&msm_device_vfe_imgwr_ctx,
+	&msm_device_vfe_misc_ctx,
+	&msm_device_vcodec_a_stream_ctx,
+	&msm_device_vcodec_a_mm1_ctx,
+	&msm_device_vcodec_b_mm2_ctx,
+	&msm_device_gfx3d_rbpa_ctx,
+	&msm_device_gfx3d_cpvgttc_ctx,
+	&msm_device_gfx3d_smmu_ctx,
+	&msm_device_gfx2d0_pixv1_ctx,
+	&msm_device_gfx2d0_texv3_ctx,
+};
+
+static struct msm_iommu_ctx_dev *msm_iommu_ctx_data[] = {
+	&jpegd_src_ctx,
+	&jpegd_dst_ctx,
+	&vpe_src_ctx,
+	&vpe_dst_ctx,
+	&mdp_vg1_ctx,
+	&mdp_rgb1_ctx,
+	&mdp_vg2_ctx,
+	&mdp_rgb2_ctx,
+	&rot_src_ctx,
+	&rot_dst_ctx,
+	&ijpeg_src_ctx,
+	&ijpeg_dst_ctx,
+	&vfe_imgwr_ctx,
+	&vfe_misc_ctx,
+	&vcodec_a_stream_ctx,
+	&vcodec_a_mm1_ctx,
+	&vcodec_b_mm2_ctx,
+	&gfx3d_rbpa_ctx,
+	&gfx3d_cpvgttc_ctx,
+	&gfx3d_smmu_ctx,
+	&gfx2d0_pixv1_ctx,
+	&gfx2d0_texv3_ctx,
+};
+
+static int msm8x60_iommu_init(void)
+{
+	int ret, i;
+
+	ret = platform_device_register(&msm_root_iommu_dev);
+	if (ret != 0) {
+		pr_err("Failed to register root IOMMU device!\n");
+		goto failure;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(msm_iommu_devs); i++) {
+		ret = platform_device_add_data(msm_iommu_devs[i],
+					       msm_iommu_data[i],
+					       sizeof(struct msm_iommu_dev));
+		if (ret != 0) {
+			pr_err("platform_device_add_data failed, "
+			       "i = %d\n", i);
+			goto failure_unwind;
+		}
+
+		ret = platform_device_register(msm_iommu_devs[i]);
+
+		if (ret != 0) {
+			pr_err("platform_device_register smmu failed, "
+			       "i = %d\n", i);
+			goto failure_unwind;
+		}
+	}
+
+	for (i = 0; i < ARRAY_SIZE(msm_iommu_ctx_devs); i++) {
+		ret = platform_device_add_data(msm_iommu_ctx_devs[i],
+					       msm_iommu_ctx_data[i],
+					       sizeof(*msm_iommu_ctx_devs[i]));
+		if (ret != 0) {
+			pr_err("platform_device_add_data smmu failed, "
+			       "i = %d\n", i);
+			goto failure_unwind2;
+		}
+
+		ret = platform_device_register(msm_iommu_ctx_devs[i]);
+		if (ret != 0) {
+			pr_err("platform_device_register ctx failed, "
+			       "i = %d\n", i);
+			goto failure_unwind2;
+		}
+	}
+	return 0;
+
+failure_unwind2:
+	while (--i >= 0)
+		platform_device_unregister(msm_iommu_ctx_devs[i]);
+failure_unwind:
+	while (--i >= 0)
+		platform_device_unregister(msm_iommu_devs[i]);
+
+	platform_device_unregister(&msm_root_iommu_dev);
+failure:
+	return ret;
+}
+
+static void msm8x60_iommu_exit(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(msm_iommu_ctx_devs); i++)
+		platform_device_unregister(msm_iommu_ctx_devs[i]);
+
+	for (i = 0; i < ARRAY_SIZE(msm_iommu_devs); ++i)
+		platform_device_unregister(msm_iommu_devs[i]);
+
+	platform_device_unregister(&msm_root_iommu_dev);
+}
+
+subsys_initcall(msm8x60_iommu_init);
+module_exit(msm8x60_iommu_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Stepan Moskovchenko <stepanm@codeaurora.org>");
diff --git a/arch/arm/mach-msm/devices-qsd8x50.c b/arch/arm/mach-msm/devices-qsd8x50.c
index 4d4a50785e3..6fe67c5d1ae 100644
--- a/arch/arm/mach-msm/devices-qsd8x50.c
+++ b/arch/arm/mach-msm/devices-qsd8x50.c
@@ -48,6 +48,11 @@ struct platform_device msm_device_uart3 = {
 	.resource	= resources_uart3,
 };
 
+struct platform_device msm_device_smd = {
+	.name   = "msm_smd",
+	.id     = -1,
+};
+
 struct clk msm_clocks_8x50[] = {
 	CLK_PCOM("adm_clk",	ADM_CLK,	NULL, 0),
 	CLK_PCOM("ebi1_clk",	EBI1_CLK,	NULL, CLK_MIN),
diff --git a/arch/arm/mach-msm/gpio.c b/arch/arm/mach-msm/gpio.c
index bc32c845c7b..33051b509e8 100644
--- a/arch/arm/mach-msm/gpio.c
+++ b/arch/arm/mach-msm/gpio.c
@@ -1,7 +1,7 @@
 /* linux/arch/arm/mach-msm/gpio.c
  *
  * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
  *
  * This software is licensed under the terms of the GNU General Public
  * License version 2, as published by the Free Software Foundation, and
@@ -14,72 +14,363 @@
  *
  */
 
+#include <linux/bitops.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
 #include <linux/module.h>
-#include <mach/gpio.h>
-#include "proc_comm.h"
-
-int gpio_tlmm_config(unsigned config, unsigned disable)
-{
-	return msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, &config, &disable);
-}
-EXPORT_SYMBOL(gpio_tlmm_config);
-
-int msm_gpios_enable(const struct msm_gpio *table, int size)
-{
-	int rc;
-	int i;
-	const struct msm_gpio *g;
-	for (i = 0; i < size; i++) {
-		g = table + i;
-		rc = gpio_tlmm_config(g->gpio_cfg, GPIO_ENABLE);
-		if (rc) {
-			pr_err("gpio_tlmm_config(0x%08x, GPIO_ENABLE)"
-			       " <%s> failed: %d\n",
-			       g->gpio_cfg, g->label ?: "?", rc);
-			pr_err("pin %d func %d dir %d pull %d drvstr %d\n",
-			       GPIO_PIN(g->gpio_cfg), GPIO_FUNC(g->gpio_cfg),
-			       GPIO_DIR(g->gpio_cfg), GPIO_PULL(g->gpio_cfg),
-			       GPIO_DRVSTR(g->gpio_cfg));
-			goto err;
-		}
+#include "gpio_hw.h"
+#include "gpiomux.h"
+
+#define FIRST_GPIO_IRQ MSM_GPIO_TO_INT(0)
+
+#define MSM_GPIO_BANK(bank, first, last)				\
+	{								\
+		.regs = {						\
+			.out =         MSM_GPIO_OUT_##bank,		\
+			.in =          MSM_GPIO_IN_##bank,		\
+			.int_status =  MSM_GPIO_INT_STATUS_##bank,	\
+			.int_clear =   MSM_GPIO_INT_CLEAR_##bank,	\
+			.int_en =      MSM_GPIO_INT_EN_##bank,		\
+			.int_edge =    MSM_GPIO_INT_EDGE_##bank,	\
+			.int_pos =     MSM_GPIO_INT_POS_##bank,		\
+			.oe =          MSM_GPIO_OE_##bank,		\
+		},							\
+		.chip = {						\
+			.base = (first),				\
+			.ngpio = (last) - (first) + 1,			\
+			.get = msm_gpio_get,				\
+			.set = msm_gpio_set,				\
+			.direction_input = msm_gpio_direction_input,	\
+			.direction_output = msm_gpio_direction_output,	\
+			.to_irq = msm_gpio_to_irq,			\
+			.request = msm_gpio_request,			\
+			.free = msm_gpio_free,				\
+		}							\
 	}
+
+#define MSM_GPIO_BROKEN_INT_CLEAR 1
+
+struct msm_gpio_regs {
+	void __iomem *out;
+	void __iomem *in;
+	void __iomem *int_status;
+	void __iomem *int_clear;
+	void __iomem *int_en;
+	void __iomem *int_edge;
+	void __iomem *int_pos;
+	void __iomem *oe;
+};
+
+struct msm_gpio_chip {
+	spinlock_t		lock;
+	struct gpio_chip	chip;
+	struct msm_gpio_regs	regs;
+#if MSM_GPIO_BROKEN_INT_CLEAR
+	unsigned                int_status_copy;
+#endif
+	unsigned int            both_edge_detect;
+	unsigned int            int_enable[2]; /* 0: awake, 1: sleep */
+};
+
+static int msm_gpio_write(struct msm_gpio_chip *msm_chip,
+			  unsigned offset, unsigned on)
+{
+	unsigned mask = BIT(offset);
+	unsigned val;
+
+	val = readl(msm_chip->regs.out);
+	if (on)
+		writel(val | mask, msm_chip->regs.out);
+	else
+		writel(val & ~mask, msm_chip->regs.out);
 	return 0;
-err:
-	msm_gpios_disable(table, i);
-	return rc;
-}
-EXPORT_SYMBOL(msm_gpios_enable);
-
-void msm_gpios_disable(const struct msm_gpio *table, int size)
-{
-	int rc;
-	int i;
-	const struct msm_gpio *g;
-	for (i = size-1; i >= 0; i--) {
-		g = table + i;
-		rc = gpio_tlmm_config(g->gpio_cfg, GPIO_DISABLE);
-		if (rc) {
-			pr_err("gpio_tlmm_config(0x%08x, GPIO_DISABLE)"
-			       " <%s> failed: %d\n",
-			       g->gpio_cfg, g->label ?: "?", rc);
-			pr_err("pin %d func %d dir %d pull %d drvstr %d\n",
-			       GPIO_PIN(g->gpio_cfg), GPIO_FUNC(g->gpio_cfg),
-			       GPIO_DIR(g->gpio_cfg), GPIO_PULL(g->gpio_cfg),
-			       GPIO_DRVSTR(g->gpio_cfg));
-		}
+}
+
+static void msm_gpio_update_both_edge_detect(struct msm_gpio_chip *msm_chip)
+{
+	int loop_limit = 100;
+	unsigned pol, val, val2, intstat;
+	do {
+		val = readl(msm_chip->regs.in);
+		pol = readl(msm_chip->regs.int_pos);
+		pol = (pol & ~msm_chip->both_edge_detect) |
+		      (~val & msm_chip->both_edge_detect);
+		writel(pol, msm_chip->regs.int_pos);
+		intstat = readl(msm_chip->regs.int_status);
+		val2 = readl(msm_chip->regs.in);
+		if (((val ^ val2) & msm_chip->both_edge_detect & ~intstat) == 0)
+			return;
+	} while (loop_limit-- > 0);
+	printk(KERN_ERR "msm_gpio_update_both_edge_detect, "
+	       "failed to reach stable state %x != %x\n", val, val2);
+}
+
+static int msm_gpio_clear_detect_status(struct msm_gpio_chip *msm_chip,
+					unsigned offset)
+{
+	unsigned bit = BIT(offset);
+
+#if MSM_GPIO_BROKEN_INT_CLEAR
+	/* Save interrupts that already triggered before we loose them. */
+	/* Any interrupt that triggers between the read of int_status */
+	/* and the write to int_clear will still be lost though. */
+	msm_chip->int_status_copy |= readl(msm_chip->regs.int_status);
+	msm_chip->int_status_copy &= ~bit;
+#endif
+	writel(bit, msm_chip->regs.int_clear);
+	msm_gpio_update_both_edge_detect(msm_chip);
+	return 0;
+}
+
+static int msm_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct msm_gpio_chip *msm_chip;
+	unsigned long irq_flags;
+
+	msm_chip = container_of(chip, struct msm_gpio_chip, chip);
+	spin_lock_irqsave(&msm_chip->lock, irq_flags);
+	writel(readl(msm_chip->regs.oe) & ~BIT(offset), msm_chip->regs.oe);
+	spin_unlock_irqrestore(&msm_chip->lock, irq_flags);
+	return 0;
+}
+
+static int
+msm_gpio_direction_output(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct msm_gpio_chip *msm_chip;
+	unsigned long irq_flags;
+
+	msm_chip = container_of(chip, struct msm_gpio_chip, chip);
+	spin_lock_irqsave(&msm_chip->lock, irq_flags);
+	msm_gpio_write(msm_chip, offset, value);
+	writel(readl(msm_chip->regs.oe) | BIT(offset), msm_chip->regs.oe);
+	spin_unlock_irqrestore(&msm_chip->lock, irq_flags);
+	return 0;
+}
+
+static int msm_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct msm_gpio_chip *msm_chip;
+
+	msm_chip = container_of(chip, struct msm_gpio_chip, chip);
+	return (readl(msm_chip->regs.in) & (1U << offset)) ? 1 : 0;
+}
+
+static void msm_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct msm_gpio_chip *msm_chip;
+	unsigned long irq_flags;
+
+	msm_chip = container_of(chip, struct msm_gpio_chip, chip);
+	spin_lock_irqsave(&msm_chip->lock, irq_flags);
+	msm_gpio_write(msm_chip, offset, value);
+	spin_unlock_irqrestore(&msm_chip->lock, irq_flags);
+}
+
+static int msm_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	return MSM_GPIO_TO_INT(chip->base + offset);
+}
+
+#ifdef CONFIG_MSM_GPIOMUX
+static int msm_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+	return msm_gpiomux_get(chip->base + offset);
+}
+
+static void msm_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+	msm_gpiomux_put(chip->base + offset);
+}
+#else
+#define msm_gpio_request NULL
+#define msm_gpio_free NULL
+#endif
+
+struct msm_gpio_chip msm_gpio_chips[] = {
+#if defined(CONFIG_ARCH_MSM7X00A)
+	MSM_GPIO_BANK(0,   0,  15),
+	MSM_GPIO_BANK(1,  16,  42),
+	MSM_GPIO_BANK(2,  43,  67),
+	MSM_GPIO_BANK(3,  68,  94),
+	MSM_GPIO_BANK(4,  95, 106),
+	MSM_GPIO_BANK(5, 107, 121),
+#elif defined(CONFIG_ARCH_MSM7X25) || defined(CONFIG_ARCH_MSM7X27)
+	MSM_GPIO_BANK(0,   0,  15),
+	MSM_GPIO_BANK(1,  16,  42),
+	MSM_GPIO_BANK(2,  43,  67),
+	MSM_GPIO_BANK(3,  68,  94),
+	MSM_GPIO_BANK(4,  95, 106),
+	MSM_GPIO_BANK(5, 107, 132),
+#elif defined(CONFIG_ARCH_MSM7X30)
+	MSM_GPIO_BANK(0,   0,  15),
+	MSM_GPIO_BANK(1,  16,  43),
+	MSM_GPIO_BANK(2,  44,  67),
+	MSM_GPIO_BANK(3,  68,  94),
+	MSM_GPIO_BANK(4,  95, 106),
+	MSM_GPIO_BANK(5, 107, 133),
+	MSM_GPIO_BANK(6, 134, 150),
+	MSM_GPIO_BANK(7, 151, 181),
+#elif defined(CONFIG_ARCH_QSD8X50)
+	MSM_GPIO_BANK(0,   0,  15),
+	MSM_GPIO_BANK(1,  16,  42),
+	MSM_GPIO_BANK(2,  43,  67),
+	MSM_GPIO_BANK(3,  68,  94),
+	MSM_GPIO_BANK(4,  95, 103),
+	MSM_GPIO_BANK(5, 104, 121),
+	MSM_GPIO_BANK(6, 122, 152),
+	MSM_GPIO_BANK(7, 153, 164),
+#endif
+};
+
+static void msm_gpio_irq_ack(unsigned int irq)
+{
+	unsigned long irq_flags;
+	struct msm_gpio_chip *msm_chip = get_irq_chip_data(irq);
+	spin_lock_irqsave(&msm_chip->lock, irq_flags);
+	msm_gpio_clear_detect_status(msm_chip,
+				     irq - gpio_to_irq(msm_chip->chip.base));
+	spin_unlock_irqrestore(&msm_chip->lock, irq_flags);
+}
+
+static void msm_gpio_irq_mask(unsigned int irq)
+{
+	unsigned long irq_flags;
+	struct msm_gpio_chip *msm_chip = get_irq_chip_data(irq);
+	unsigned offset = irq - gpio_to_irq(msm_chip->chip.base);
+
+	spin_lock_irqsave(&msm_chip->lock, irq_flags);
+	/* level triggered interrupts are also latched */
+	if (!(readl(msm_chip->regs.int_edge) & BIT(offset)))
+		msm_gpio_clear_detect_status(msm_chip, offset);
+	msm_chip->int_enable[0] &= ~BIT(offset);
+	writel(msm_chip->int_enable[0], msm_chip->regs.int_en);
+	spin_unlock_irqrestore(&msm_chip->lock, irq_flags);
+}
+
+static void msm_gpio_irq_unmask(unsigned int irq)
+{
+	unsigned long irq_flags;
+	struct msm_gpio_chip *msm_chip = get_irq_chip_data(irq);
+	unsigned offset = irq - gpio_to_irq(msm_chip->chip.base);
+
+	spin_lock_irqsave(&msm_chip->lock, irq_flags);
+	/* level triggered interrupts are also latched */
+	if (!(readl(msm_chip->regs.int_edge) & BIT(offset)))
+		msm_gpio_clear_detect_status(msm_chip, offset);
+	msm_chip->int_enable[0] |= BIT(offset);
+	writel(msm_chip->int_enable[0], msm_chip->regs.int_en);
+	spin_unlock_irqrestore(&msm_chip->lock, irq_flags);
+}
+
+static int msm_gpio_irq_set_wake(unsigned int irq, unsigned int on)
+{
+	unsigned long irq_flags;
+	struct msm_gpio_chip *msm_chip = get_irq_chip_data(irq);
+	unsigned offset = irq - gpio_to_irq(msm_chip->chip.base);
+
+	spin_lock_irqsave(&msm_chip->lock, irq_flags);
+
+	if (on)
+		msm_chip->int_enable[1] |= BIT(offset);
+	else
+		msm_chip->int_enable[1] &= ~BIT(offset);
+
+	spin_unlock_irqrestore(&msm_chip->lock, irq_flags);
+	return 0;
+}
+
+static int msm_gpio_irq_set_type(unsigned int irq, unsigned int flow_type)
+{
+	unsigned long irq_flags;
+	struct msm_gpio_chip *msm_chip = get_irq_chip_data(irq);
+	unsigned offset = irq - gpio_to_irq(msm_chip->chip.base);
+	unsigned val, mask = BIT(offset);
+
+	spin_lock_irqsave(&msm_chip->lock, irq_flags);
+	val = readl(msm_chip->regs.int_edge);
+	if (flow_type & IRQ_TYPE_EDGE_BOTH) {
+		writel(val | mask, msm_chip->regs.int_edge);
+		irq_desc[irq].handle_irq = handle_edge_irq;
+	} else {
+		writel(val & ~mask, msm_chip->regs.int_edge);
+		irq_desc[irq].handle_irq = handle_level_irq;
+	}
+	if ((flow_type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) {
+		msm_chip->both_edge_detect |= mask;
+		msm_gpio_update_both_edge_detect(msm_chip);
+	} else {
+		msm_chip->both_edge_detect &= ~mask;
+		val = readl(msm_chip->regs.int_pos);
+		if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_HIGH))
+			writel(val | mask, msm_chip->regs.int_pos);
+		else
+			writel(val & ~mask, msm_chip->regs.int_pos);
 	}
+	spin_unlock_irqrestore(&msm_chip->lock, irq_flags);
+	return 0;
 }
-EXPORT_SYMBOL(msm_gpios_disable);
 
-int msm_gpios_request_enable(const struct msm_gpio *table, int size)
+static void msm_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 {
-	int rc = msm_gpios_enable(table, size);
-	return rc;
+	int i, j, mask;
+	unsigned val;
+
+	for (i = 0; i < ARRAY_SIZE(msm_gpio_chips); i++) {
+		struct msm_gpio_chip *msm_chip = &msm_gpio_chips[i];
+		val = readl(msm_chip->regs.int_status);
+		val &= msm_chip->int_enable[0];
+		while (val) {
+			mask = val & -val;
+			j = fls(mask) - 1;
+			/* printk("%s %08x %08x bit %d gpio %d irq %d\n",
+				__func__, v, m, j, msm_chip->chip.start + j,
+				FIRST_GPIO_IRQ + msm_chip->chip.start + j); */
+			val &= ~mask;
+			generic_handle_irq(FIRST_GPIO_IRQ +
+					   msm_chip->chip.base + j);
+		}
+	}
+	desc->chip->ack(irq);
 }
-EXPORT_SYMBOL(msm_gpios_request_enable);
 
-void msm_gpios_disable_free(const struct msm_gpio *table, int size)
+static struct irq_chip msm_gpio_irq_chip = {
+	.name      = "msmgpio",
+	.ack       = msm_gpio_irq_ack,
+	.mask      = msm_gpio_irq_mask,
+	.unmask    = msm_gpio_irq_unmask,
+	.set_wake  = msm_gpio_irq_set_wake,
+	.set_type  = msm_gpio_irq_set_type,
+};
+
+static int __init msm_init_gpio(void)
 {
-	msm_gpios_disable(table, size);
+	int i, j = 0;
+
+	for (i = FIRST_GPIO_IRQ; i < FIRST_GPIO_IRQ + NR_GPIO_IRQS; i++) {
+		if (i - FIRST_GPIO_IRQ >=
+			msm_gpio_chips[j].chip.base +
+			msm_gpio_chips[j].chip.ngpio)
+			j++;
+		set_irq_chip_data(i, &msm_gpio_chips[j]);
+		set_irq_chip(i, &msm_gpio_irq_chip);
+		set_irq_handler(i, handle_edge_irq);
+		set_irq_flags(i, IRQF_VALID);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(msm_gpio_chips); i++) {
+		spin_lock_init(&msm_gpio_chips[i].lock);
+		writel(0, msm_gpio_chips[i].regs.int_en);
+		gpiochip_add(&msm_gpio_chips[i].chip);
+	}
+
+	set_irq_chained_handler(INT_GPIO_GROUP1, msm_gpio_irq_handler);
+	set_irq_chained_handler(INT_GPIO_GROUP2, msm_gpio_irq_handler);
+	set_irq_wake(INT_GPIO_GROUP1, 1);
+	set_irq_wake(INT_GPIO_GROUP2, 2);
+	return 0;
 }
-EXPORT_SYMBOL(msm_gpios_disable_free);
+
+postcore_initcall(msm_init_gpio);
diff --git a/arch/arm/mach-msm/gpio_hw.h b/arch/arm/mach-msm/gpio_hw.h
new file mode 100644
index 00000000000..6b5066038ba
--- /dev/null
+++ b/arch/arm/mach-msm/gpio_hw.h
@@ -0,0 +1,278 @@
+/* arch/arm/mach-msm/gpio_hw.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ARCH_ARM_MACH_MSM_GPIO_HW_H
+#define __ARCH_ARM_MACH_MSM_GPIO_HW_H
+
+#include <mach/msm_iomap.h>
+
+/* see 80-VA736-2 Rev C pp 695-751
+**
+** These are actually the *shadow* gpio registers, since the
+** real ones (which allow full access) are only available to the
+** ARM9 side of the world.
+**
+** Since the _BASE need to be page-aligned when we're mapping them
+** to virtual addresses, adjust for the additional offset in these
+** macros.
+*/
+
+#if defined(CONFIG_ARCH_MSM7X30)
+#define MSM_GPIO1_REG(off) (MSM_GPIO1_BASE + (off))
+#define MSM_GPIO2_REG(off) (MSM_GPIO2_BASE + 0x400 + (off))
+#else
+#define MSM_GPIO1_REG(off) (MSM_GPIO1_BASE + 0x800 + (off))
+#define MSM_GPIO2_REG(off) (MSM_GPIO2_BASE + 0xC00 + (off))
+#endif
+
+#if defined(CONFIG_ARCH_MSM7X00A) || defined(CONFIG_ARCH_MSM7X25) ||\
+    defined(CONFIG_ARCH_MSM7X27)
+
+/* output value */
+#define MSM_GPIO_OUT_0         MSM_GPIO1_REG(0x00)  /* gpio  15-0  */
+#define MSM_GPIO_OUT_1         MSM_GPIO2_REG(0x00)  /* gpio  42-16 */
+#define MSM_GPIO_OUT_2         MSM_GPIO1_REG(0x04)  /* gpio  67-43 */
+#define MSM_GPIO_OUT_3         MSM_GPIO1_REG(0x08)  /* gpio  94-68 */
+#define MSM_GPIO_OUT_4         MSM_GPIO1_REG(0x0C)  /* gpio 106-95 */
+#define MSM_GPIO_OUT_5         MSM_GPIO1_REG(0x50)  /* gpio 107-121 */
+
+/* same pin map as above, output enable */
+#define MSM_GPIO_OE_0          MSM_GPIO1_REG(0x10)
+#define MSM_GPIO_OE_1          MSM_GPIO2_REG(0x08)
+#define MSM_GPIO_OE_2          MSM_GPIO1_REG(0x14)
+#define MSM_GPIO_OE_3          MSM_GPIO1_REG(0x18)
+#define MSM_GPIO_OE_4          MSM_GPIO1_REG(0x1C)
+#define MSM_GPIO_OE_5          MSM_GPIO1_REG(0x54)
+
+/* same pin map as above, input read */
+#define MSM_GPIO_IN_0          MSM_GPIO1_REG(0x34)
+#define MSM_GPIO_IN_1          MSM_GPIO2_REG(0x20)
+#define MSM_GPIO_IN_2          MSM_GPIO1_REG(0x38)
+#define MSM_GPIO_IN_3          MSM_GPIO1_REG(0x3C)
+#define MSM_GPIO_IN_4          MSM_GPIO1_REG(0x40)
+#define MSM_GPIO_IN_5          MSM_GPIO1_REG(0x44)
+
+/* same pin map as above, 1=edge 0=level interrup */
+#define MSM_GPIO_INT_EDGE_0    MSM_GPIO1_REG(0x60)
+#define MSM_GPIO_INT_EDGE_1    MSM_GPIO2_REG(0x50)
+#define MSM_GPIO_INT_EDGE_2    MSM_GPIO1_REG(0x64)
+#define MSM_GPIO_INT_EDGE_3    MSM_GPIO1_REG(0x68)
+#define MSM_GPIO_INT_EDGE_4    MSM_GPIO1_REG(0x6C)
+#define MSM_GPIO_INT_EDGE_5    MSM_GPIO1_REG(0xC0)
+
+/* same pin map as above, 1=positive 0=negative */
+#define MSM_GPIO_INT_POS_0     MSM_GPIO1_REG(0x70)
+#define MSM_GPIO_INT_POS_1     MSM_GPIO2_REG(0x58)
+#define MSM_GPIO_INT_POS_2     MSM_GPIO1_REG(0x74)
+#define MSM_GPIO_INT_POS_3     MSM_GPIO1_REG(0x78)
+#define MSM_GPIO_INT_POS_4     MSM_GPIO1_REG(0x7C)
+#define MSM_GPIO_INT_POS_5     MSM_GPIO1_REG(0xBC)
+
+/* same pin map as above, interrupt enable */
+#define MSM_GPIO_INT_EN_0      MSM_GPIO1_REG(0x80)
+#define MSM_GPIO_INT_EN_1      MSM_GPIO2_REG(0x60)
+#define MSM_GPIO_INT_EN_2      MSM_GPIO1_REG(0x84)
+#define MSM_GPIO_INT_EN_3      MSM_GPIO1_REG(0x88)
+#define MSM_GPIO_INT_EN_4      MSM_GPIO1_REG(0x8C)
+#define MSM_GPIO_INT_EN_5      MSM_GPIO1_REG(0xB8)
+
+/* same pin map as above, write 1 to clear interrupt */
+#define MSM_GPIO_INT_CLEAR_0   MSM_GPIO1_REG(0x90)
+#define MSM_GPIO_INT_CLEAR_1   MSM_GPIO2_REG(0x68)
+#define MSM_GPIO_INT_CLEAR_2   MSM_GPIO1_REG(0x94)
+#define MSM_GPIO_INT_CLEAR_3   MSM_GPIO1_REG(0x98)
+#define MSM_GPIO_INT_CLEAR_4   MSM_GPIO1_REG(0x9C)
+#define MSM_GPIO_INT_CLEAR_5   MSM_GPIO1_REG(0xB4)
+
+/* same pin map as above, 1=interrupt pending */
+#define MSM_GPIO_INT_STATUS_0  MSM_GPIO1_REG(0xA0)
+#define MSM_GPIO_INT_STATUS_1  MSM_GPIO2_REG(0x70)
+#define MSM_GPIO_INT_STATUS_2  MSM_GPIO1_REG(0xA4)
+#define MSM_GPIO_INT_STATUS_3  MSM_GPIO1_REG(0xA8)
+#define MSM_GPIO_INT_STATUS_4  MSM_GPIO1_REG(0xAC)
+#define MSM_GPIO_INT_STATUS_5  MSM_GPIO1_REG(0xB0)
+
+#endif
+
+#if defined(CONFIG_ARCH_QSD8X50)
+/* output value */
+#define MSM_GPIO_OUT_0         MSM_GPIO1_REG(0x00)  /* gpio  15-0   */
+#define MSM_GPIO_OUT_1         MSM_GPIO2_REG(0x00)  /* gpio  42-16  */
+#define MSM_GPIO_OUT_2         MSM_GPIO1_REG(0x04)  /* gpio  67-43  */
+#define MSM_GPIO_OUT_3         MSM_GPIO1_REG(0x08)  /* gpio  94-68  */
+#define MSM_GPIO_OUT_4         MSM_GPIO1_REG(0x0C)  /* gpio 103-95  */
+#define MSM_GPIO_OUT_5         MSM_GPIO1_REG(0x10)  /* gpio 121-104 */
+#define MSM_GPIO_OUT_6         MSM_GPIO1_REG(0x14)  /* gpio 152-122 */
+#define MSM_GPIO_OUT_7         MSM_GPIO1_REG(0x18)  /* gpio 164-153 */
+
+/* same pin map as above, output enable */
+#define MSM_GPIO_OE_0          MSM_GPIO1_REG(0x20)
+#define MSM_GPIO_OE_1          MSM_GPIO2_REG(0x08)
+#define MSM_GPIO_OE_2          MSM_GPIO1_REG(0x24)
+#define MSM_GPIO_OE_3          MSM_GPIO1_REG(0x28)
+#define MSM_GPIO_OE_4          MSM_GPIO1_REG(0x2C)
+#define MSM_GPIO_OE_5          MSM_GPIO1_REG(0x30)
+#define MSM_GPIO_OE_6          MSM_GPIO1_REG(0x34)
+#define MSM_GPIO_OE_7          MSM_GPIO1_REG(0x38)
+
+/* same pin map as above, input read */
+#define MSM_GPIO_IN_0          MSM_GPIO1_REG(0x50)
+#define MSM_GPIO_IN_1          MSM_GPIO2_REG(0x20)
+#define MSM_GPIO_IN_2          MSM_GPIO1_REG(0x54)
+#define MSM_GPIO_IN_3          MSM_GPIO1_REG(0x58)
+#define MSM_GPIO_IN_4          MSM_GPIO1_REG(0x5C)
+#define MSM_GPIO_IN_5          MSM_GPIO1_REG(0x60)
+#define MSM_GPIO_IN_6          MSM_GPIO1_REG(0x64)
+#define MSM_GPIO_IN_7          MSM_GPIO1_REG(0x68)
+
+/* same pin map as above, 1=edge 0=level interrup */
+#define MSM_GPIO_INT_EDGE_0    MSM_GPIO1_REG(0x70)
+#define MSM_GPIO_INT_EDGE_1    MSM_GPIO2_REG(0x50)
+#define MSM_GPIO_INT_EDGE_2    MSM_GPIO1_REG(0x74)
+#define MSM_GPIO_INT_EDGE_3    MSM_GPIO1_REG(0x78)
+#define MSM_GPIO_INT_EDGE_4    MSM_GPIO1_REG(0x7C)
+#define MSM_GPIO_INT_EDGE_5    MSM_GPIO1_REG(0x80)
+#define MSM_GPIO_INT_EDGE_6    MSM_GPIO1_REG(0x84)
+#define MSM_GPIO_INT_EDGE_7    MSM_GPIO1_REG(0x88)
+
+/* same pin map as above, 1=positive 0=negative */
+#define MSM_GPIO_INT_POS_0     MSM_GPIO1_REG(0x90)
+#define MSM_GPIO_INT_POS_1     MSM_GPIO2_REG(0x58)
+#define MSM_GPIO_INT_POS_2     MSM_GPIO1_REG(0x94)
+#define MSM_GPIO_INT_POS_3     MSM_GPIO1_REG(0x98)
+#define MSM_GPIO_INT_POS_4     MSM_GPIO1_REG(0x9C)
+#define MSM_GPIO_INT_POS_5     MSM_GPIO1_REG(0xA0)
+#define MSM_GPIO_INT_POS_6     MSM_GPIO1_REG(0xA4)
+#define MSM_GPIO_INT_POS_7     MSM_GPIO1_REG(0xA8)
+
+/* same pin map as above, interrupt enable */
+#define MSM_GPIO_INT_EN_0      MSM_GPIO1_REG(0xB0)
+#define MSM_GPIO_INT_EN_1      MSM_GPIO2_REG(0x60)
+#define MSM_GPIO_INT_EN_2      MSM_GPIO1_REG(0xB4)
+#define MSM_GPIO_INT_EN_3      MSM_GPIO1_REG(0xB8)
+#define MSM_GPIO_INT_EN_4      MSM_GPIO1_REG(0xBC)
+#define MSM_GPIO_INT_EN_5      MSM_GPIO1_REG(0xC0)
+#define MSM_GPIO_INT_EN_6      MSM_GPIO1_REG(0xC4)
+#define MSM_GPIO_INT_EN_7      MSM_GPIO1_REG(0xC8)
+
+/* same pin map as above, write 1 to clear interrupt */
+#define MSM_GPIO_INT_CLEAR_0   MSM_GPIO1_REG(0xD0)
+#define MSM_GPIO_INT_CLEAR_1   MSM_GPIO2_REG(0x68)
+#define MSM_GPIO_INT_CLEAR_2   MSM_GPIO1_REG(0xD4)
+#define MSM_GPIO_INT_CLEAR_3   MSM_GPIO1_REG(0xD8)
+#define MSM_GPIO_INT_CLEAR_4   MSM_GPIO1_REG(0xDC)
+#define MSM_GPIO_INT_CLEAR_5   MSM_GPIO1_REG(0xE0)
+#define MSM_GPIO_INT_CLEAR_6   MSM_GPIO1_REG(0xE4)
+#define MSM_GPIO_INT_CLEAR_7   MSM_GPIO1_REG(0xE8)
+
+/* same pin map as above, 1=interrupt pending */
+#define MSM_GPIO_INT_STATUS_0  MSM_GPIO1_REG(0xF0)
+#define MSM_GPIO_INT_STATUS_1  MSM_GPIO2_REG(0x70)
+#define MSM_GPIO_INT_STATUS_2  MSM_GPIO1_REG(0xF4)
+#define MSM_GPIO_INT_STATUS_3  MSM_GPIO1_REG(0xF8)
+#define MSM_GPIO_INT_STATUS_4  MSM_GPIO1_REG(0xFC)
+#define MSM_GPIO_INT_STATUS_5  MSM_GPIO1_REG(0x100)
+#define MSM_GPIO_INT_STATUS_6  MSM_GPIO1_REG(0x104)
+#define MSM_GPIO_INT_STATUS_7  MSM_GPIO1_REG(0x108)
+
+#endif
+
+#if defined(CONFIG_ARCH_MSM7X30)
+
+/* output value */
+#define MSM_GPIO_OUT_0         MSM_GPIO1_REG(0x00)   /* gpio  15-0   */
+#define MSM_GPIO_OUT_1         MSM_GPIO2_REG(0x00)   /* gpio  43-16  */
+#define MSM_GPIO_OUT_2         MSM_GPIO1_REG(0x04)   /* gpio  67-44  */
+#define MSM_GPIO_OUT_3         MSM_GPIO1_REG(0x08)   /* gpio  94-68  */
+#define MSM_GPIO_OUT_4         MSM_GPIO1_REG(0x0C)   /* gpio 106-95  */
+#define MSM_GPIO_OUT_5         MSM_GPIO1_REG(0x50)   /* gpio 133-107 */
+#define MSM_GPIO_OUT_6         MSM_GPIO1_REG(0xC4)   /* gpio 150-134 */
+#define MSM_GPIO_OUT_7         MSM_GPIO1_REG(0x214)  /* gpio 181-151 */
+
+/* same pin map as above, output enable */
+#define MSM_GPIO_OE_0          MSM_GPIO1_REG(0x10)
+#define MSM_GPIO_OE_1          MSM_GPIO2_REG(0x08)
+#define MSM_GPIO_OE_2          MSM_GPIO1_REG(0x14)
+#define MSM_GPIO_OE_3          MSM_GPIO1_REG(0x18)
+#define MSM_GPIO_OE_4          MSM_GPIO1_REG(0x1C)
+#define MSM_GPIO_OE_5          MSM_GPIO1_REG(0x54)
+#define MSM_GPIO_OE_6          MSM_GPIO1_REG(0xC8)
+#define MSM_GPIO_OE_7          MSM_GPIO1_REG(0x218)
+
+/* same pin map as above, input read */
+#define MSM_GPIO_IN_0          MSM_GPIO1_REG(0x34)
+#define MSM_GPIO_IN_1          MSM_GPIO2_REG(0x20)
+#define MSM_GPIO_IN_2          MSM_GPIO1_REG(0x38)
+#define MSM_GPIO_IN_3          MSM_GPIO1_REG(0x3C)
+#define MSM_GPIO_IN_4          MSM_GPIO1_REG(0x40)
+#define MSM_GPIO_IN_5          MSM_GPIO1_REG(0x44)
+#define MSM_GPIO_IN_6          MSM_GPIO1_REG(0xCC)
+#define MSM_GPIO_IN_7          MSM_GPIO1_REG(0x21C)
+
+/* same pin map as above, 1=edge 0=level interrup */
+#define MSM_GPIO_INT_EDGE_0    MSM_GPIO1_REG(0x60)
+#define MSM_GPIO_INT_EDGE_1    MSM_GPIO2_REG(0x50)
+#define MSM_GPIO_INT_EDGE_2    MSM_GPIO1_REG(0x64)
+#define MSM_GPIO_INT_EDGE_3    MSM_GPIO1_REG(0x68)
+#define MSM_GPIO_INT_EDGE_4    MSM_GPIO1_REG(0x6C)
+#define MSM_GPIO_INT_EDGE_5    MSM_GPIO1_REG(0xC0)
+#define MSM_GPIO_INT_EDGE_6    MSM_GPIO1_REG(0xD0)
+#define MSM_GPIO_INT_EDGE_7    MSM_GPIO1_REG(0x240)
+
+/* same pin map as above, 1=positive 0=negative */
+#define MSM_GPIO_INT_POS_0     MSM_GPIO1_REG(0x70)
+#define MSM_GPIO_INT_POS_1     MSM_GPIO2_REG(0x58)
+#define MSM_GPIO_INT_POS_2     MSM_GPIO1_REG(0x74)
+#define MSM_GPIO_INT_POS_3     MSM_GPIO1_REG(0x78)
+#define MSM_GPIO_INT_POS_4     MSM_GPIO1_REG(0x7C)
+#define MSM_GPIO_INT_POS_5     MSM_GPIO1_REG(0xBC)
+#define MSM_GPIO_INT_POS_6     MSM_GPIO1_REG(0xD4)
+#define MSM_GPIO_INT_POS_7     MSM_GPIO1_REG(0x228)
+
+/* same pin map as above, interrupt enable */
+#define MSM_GPIO_INT_EN_0      MSM_GPIO1_REG(0x80)
+#define MSM_GPIO_INT_EN_1      MSM_GPIO2_REG(0x60)
+#define MSM_GPIO_INT_EN_2      MSM_GPIO1_REG(0x84)
+#define MSM_GPIO_INT_EN_3      MSM_GPIO1_REG(0x88)
+#define MSM_GPIO_INT_EN_4      MSM_GPIO1_REG(0x8C)
+#define MSM_GPIO_INT_EN_5      MSM_GPIO1_REG(0xB8)
+#define MSM_GPIO_INT_EN_6      MSM_GPIO1_REG(0xD8)
+#define MSM_GPIO_INT_EN_7      MSM_GPIO1_REG(0x22C)
+
+/* same pin map as above, write 1 to clear interrupt */
+#define MSM_GPIO_INT_CLEAR_0   MSM_GPIO1_REG(0x90)
+#define MSM_GPIO_INT_CLEAR_1   MSM_GPIO2_REG(0x68)
+#define MSM_GPIO_INT_CLEAR_2   MSM_GPIO1_REG(0x94)
+#define MSM_GPIO_INT_CLEAR_3   MSM_GPIO1_REG(0x98)
+#define MSM_GPIO_INT_CLEAR_4   MSM_GPIO1_REG(0x9C)
+#define MSM_GPIO_INT_CLEAR_5   MSM_GPIO1_REG(0xB4)
+#define MSM_GPIO_INT_CLEAR_6   MSM_GPIO1_REG(0xDC)
+#define MSM_GPIO_INT_CLEAR_7   MSM_GPIO1_REG(0x230)
+
+/* same pin map as above, 1=interrupt pending */
+#define MSM_GPIO_INT_STATUS_0  MSM_GPIO1_REG(0xA0)
+#define MSM_GPIO_INT_STATUS_1  MSM_GPIO2_REG(0x70)
+#define MSM_GPIO_INT_STATUS_2  MSM_GPIO1_REG(0xA4)
+#define MSM_GPIO_INT_STATUS_3  MSM_GPIO1_REG(0xA8)
+#define MSM_GPIO_INT_STATUS_4  MSM_GPIO1_REG(0xAC)
+#define MSM_GPIO_INT_STATUS_5  MSM_GPIO1_REG(0xB0)
+#define MSM_GPIO_INT_STATUS_6  MSM_GPIO1_REG(0xE0)
+#define MSM_GPIO_INT_STATUS_7  MSM_GPIO1_REG(0x234)
+
+#endif
+
+#endif
diff --git a/arch/arm/mach-msm/gpiomux-7x30.c b/arch/arm/mach-msm/gpiomux-7x30.c
new file mode 100644
index 00000000000..6ce41c5241a
--- /dev/null
+++ b/arch/arm/mach-msm/gpiomux-7x30.c
@@ -0,0 +1,38 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+#include "gpiomux.h"
+
+struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {
+#ifdef CONFIG_SERIAL_MSM_CONSOLE
+	[49] = { /* UART2 RFR */
+		.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
+			     GPIOMUX_FUNC_2 | GPIOMUX_VALID,
+	},
+	[50] = { /* UART2 CTS */
+		.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
+			     GPIOMUX_FUNC_2 | GPIOMUX_VALID,
+	},
+	[51] = { /* UART2 RX */
+		.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
+			     GPIOMUX_FUNC_2 | GPIOMUX_VALID,
+	},
+	[52] = { /* UART2 TX */
+		.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
+			     GPIOMUX_FUNC_2 | GPIOMUX_VALID,
+	},
+#endif
+};
diff --git a/arch/arm/mach-msm/gpiomux-8x50.c b/arch/arm/mach-msm/gpiomux-8x50.c
new file mode 100644
index 00000000000..4406e0f4ae9
--- /dev/null
+++ b/arch/arm/mach-msm/gpiomux-8x50.c
@@ -0,0 +1,28 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+#include "gpiomux.h"
+
+struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {
+	[86] = { /* UART3 RX */
+		.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
+			     GPIOMUX_FUNC_1 | GPIOMUX_VALID,
+	},
+	[87] = { /* UART3 TX */
+		.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
+			     GPIOMUX_FUNC_1 | GPIOMUX_VALID,
+	},
+};
diff --git a/arch/arm/mach-msm/gpiomux-8x60.c b/arch/arm/mach-msm/gpiomux-8x60.c
new file mode 100644
index 00000000000..7b380b31bd0
--- /dev/null
+++ b/arch/arm/mach-msm/gpiomux-8x60.c
@@ -0,0 +1,19 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+#include "gpiomux.h"
+
+struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {};
diff --git a/arch/arm/mach-msm/gpiomux-v1.c b/arch/arm/mach-msm/gpiomux-v1.c
new file mode 100644
index 00000000000..27de2abd714
--- /dev/null
+++ b/arch/arm/mach-msm/gpiomux-v1.c
@@ -0,0 +1,33 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+#include <linux/kernel.h>
+#include "gpiomux.h"
+#include "proc_comm.h"
+
+void __msm_gpiomux_write(unsigned gpio, gpiomux_config_t val)
+{
+	unsigned tlmm_config  = (val & ~GPIOMUX_CTL_MASK) |
+				((gpio & 0x3ff) << 4);
+	unsigned tlmm_disable = 0;
+	int rc;
+
+	rc = msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX,
+			   &tlmm_config, &tlmm_disable);
+	if (rc)
+		pr_err("%s: unexpected proc_comm failure %d: %08x %08x\n",
+		       __func__, rc, tlmm_config, tlmm_disable);
+}
diff --git a/arch/arm/mach-msm/gpiomux-v1.h b/arch/arm/mach-msm/gpiomux-v1.h
new file mode 100644
index 00000000000..71d86feba45
--- /dev/null
+++ b/arch/arm/mach-msm/gpiomux-v1.h
@@ -0,0 +1,67 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+#ifndef __ARCH_ARM_MACH_MSM_GPIOMUX_V1_H
+#define __ARCH_ARM_MACH_MSM_GPIOMUX_V1_H
+
+#if defined(CONFIG_ARCH_MSM7X30)
+#define GPIOMUX_NGPIOS 182
+#elif defined(CONFIG_ARCH_QSD8X50)
+#define GPIOMUX_NGPIOS 165
+#else
+#define GPIOMUX_NGPIOS 133
+#endif
+
+typedef u32 gpiomux_config_t;
+
+enum {
+	GPIOMUX_DRV_2MA  = 0UL << 17,
+	GPIOMUX_DRV_4MA  = 1UL << 17,
+	GPIOMUX_DRV_6MA  = 2UL << 17,
+	GPIOMUX_DRV_8MA  = 3UL << 17,
+	GPIOMUX_DRV_10MA = 4UL << 17,
+	GPIOMUX_DRV_12MA = 5UL << 17,
+	GPIOMUX_DRV_14MA = 6UL << 17,
+	GPIOMUX_DRV_16MA = 7UL << 17,
+};
+
+enum {
+	GPIOMUX_FUNC_GPIO = 0UL,
+	GPIOMUX_FUNC_1    = 1UL,
+	GPIOMUX_FUNC_2    = 2UL,
+	GPIOMUX_FUNC_3    = 3UL,
+	GPIOMUX_FUNC_4    = 4UL,
+	GPIOMUX_FUNC_5    = 5UL,
+	GPIOMUX_FUNC_6    = 6UL,
+	GPIOMUX_FUNC_7    = 7UL,
+	GPIOMUX_FUNC_8    = 8UL,
+	GPIOMUX_FUNC_9    = 9UL,
+	GPIOMUX_FUNC_A    = 10UL,
+	GPIOMUX_FUNC_B    = 11UL,
+	GPIOMUX_FUNC_C    = 12UL,
+	GPIOMUX_FUNC_D    = 13UL,
+	GPIOMUX_FUNC_E    = 14UL,
+	GPIOMUX_FUNC_F    = 15UL,
+};
+
+enum {
+	GPIOMUX_PULL_NONE   = 0UL << 15,
+	GPIOMUX_PULL_DOWN   = 1UL << 15,
+	GPIOMUX_PULL_KEEPER = 2UL << 15,
+	GPIOMUX_PULL_UP     = 3UL << 15,
+};
+
+#endif
diff --git a/arch/arm/mach-msm/gpiomux-v2.c b/arch/arm/mach-msm/gpiomux-v2.c
new file mode 100644
index 00000000000..273396d2b12
--- /dev/null
+++ b/arch/arm/mach-msm/gpiomux-v2.c
@@ -0,0 +1,25 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+#include <linux/io.h>
+#include <mach/msm_iomap.h>
+#include "gpiomux.h"
+
+void __msm_gpiomux_write(unsigned gpio, gpiomux_config_t val)
+{
+	writel(val & ~GPIOMUX_CTL_MASK,
+	       MSM_TLMM_BASE + 0x1000 + (0x10 * gpio));
+}
diff --git a/arch/arm/mach-msm/gpiomux-v2.h b/arch/arm/mach-msm/gpiomux-v2.h
new file mode 100644
index 00000000000..3bf10e7f038
--- /dev/null
+++ b/arch/arm/mach-msm/gpiomux-v2.h
@@ -0,0 +1,61 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+#ifndef __ARCH_ARM_MACH_MSM_GPIOMUX_V2_H
+#define __ARCH_ARM_MACH_MSM_GPIOMUX_V2_H
+
+#define GPIOMUX_NGPIOS 173
+
+typedef u16 gpiomux_config_t;
+
+enum {
+	GPIOMUX_DRV_2MA  = 0UL << 6,
+	GPIOMUX_DRV_4MA  = 1UL << 6,
+	GPIOMUX_DRV_6MA  = 2UL << 6,
+	GPIOMUX_DRV_8MA  = 3UL << 6,
+	GPIOMUX_DRV_10MA = 4UL << 6,
+	GPIOMUX_DRV_12MA = 5UL << 6,
+	GPIOMUX_DRV_14MA = 6UL << 6,
+	GPIOMUX_DRV_16MA = 7UL << 6,
+};
+
+enum {
+	GPIOMUX_FUNC_GPIO = 0UL  << 2,
+	GPIOMUX_FUNC_1    = 1UL  << 2,
+	GPIOMUX_FUNC_2    = 2UL  << 2,
+	GPIOMUX_FUNC_3    = 3UL  << 2,
+	GPIOMUX_FUNC_4    = 4UL  << 2,
+	GPIOMUX_FUNC_5    = 5UL  << 2,
+	GPIOMUX_FUNC_6    = 6UL  << 2,
+	GPIOMUX_FUNC_7    = 7UL  << 2,
+	GPIOMUX_FUNC_8    = 8UL  << 2,
+	GPIOMUX_FUNC_9    = 9UL  << 2,
+	GPIOMUX_FUNC_A    = 10UL << 2,
+	GPIOMUX_FUNC_B    = 11UL << 2,
+	GPIOMUX_FUNC_C    = 12UL << 2,
+	GPIOMUX_FUNC_D    = 13UL << 2,
+	GPIOMUX_FUNC_E    = 14UL << 2,
+	GPIOMUX_FUNC_F    = 15UL << 2,
+};
+
+enum {
+	GPIOMUX_PULL_NONE   = 0UL,
+	GPIOMUX_PULL_DOWN   = 1UL,
+	GPIOMUX_PULL_KEEPER = 2UL,
+	GPIOMUX_PULL_UP     = 3UL,
+};
+
+#endif
diff --git a/arch/arm/mach-msm/gpiomux.c b/arch/arm/mach-msm/gpiomux.c
new file mode 100644
index 00000000000..53af21abd15
--- /dev/null
+++ b/arch/arm/mach-msm/gpiomux.c
@@ -0,0 +1,96 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include "gpiomux.h"
+
+static DEFINE_SPINLOCK(gpiomux_lock);
+
+int msm_gpiomux_write(unsigned gpio,
+		      gpiomux_config_t active,
+		      gpiomux_config_t suspended)
+{
+	struct msm_gpiomux_config *cfg = msm_gpiomux_configs + gpio;
+	unsigned long irq_flags;
+	gpiomux_config_t setting;
+
+	if (gpio >= GPIOMUX_NGPIOS)
+		return -EINVAL;
+
+	spin_lock_irqsave(&gpiomux_lock, irq_flags);
+
+	if (active & GPIOMUX_VALID)
+		cfg->active = active;
+
+	if (suspended & GPIOMUX_VALID)
+		cfg->suspended = suspended;
+
+	setting = cfg->ref ? active : suspended;
+	if (setting & GPIOMUX_VALID)
+		__msm_gpiomux_write(gpio, setting);
+
+	spin_unlock_irqrestore(&gpiomux_lock, irq_flags);
+	return 0;
+}
+EXPORT_SYMBOL(msm_gpiomux_write);
+
+int msm_gpiomux_get(unsigned gpio)
+{
+	struct msm_gpiomux_config *cfg = msm_gpiomux_configs + gpio;
+	unsigned long irq_flags;
+
+	if (gpio >= GPIOMUX_NGPIOS)
+		return -EINVAL;
+
+	spin_lock_irqsave(&gpiomux_lock, irq_flags);
+	if (cfg->ref++ == 0 && cfg->active & GPIOMUX_VALID)
+		__msm_gpiomux_write(gpio, cfg->active);
+	spin_unlock_irqrestore(&gpiomux_lock, irq_flags);
+	return 0;
+}
+EXPORT_SYMBOL(msm_gpiomux_get);
+
+int msm_gpiomux_put(unsigned gpio)
+{
+	struct msm_gpiomux_config *cfg = msm_gpiomux_configs + gpio;
+	unsigned long irq_flags;
+
+	if (gpio >= GPIOMUX_NGPIOS)
+		return -EINVAL;
+
+	spin_lock_irqsave(&gpiomux_lock, irq_flags);
+	BUG_ON(cfg->ref == 0);
+	if (--cfg->ref == 0 && cfg->suspended & GPIOMUX_VALID)
+		__msm_gpiomux_write(gpio, cfg->suspended);
+	spin_unlock_irqrestore(&gpiomux_lock, irq_flags);
+	return 0;
+}
+EXPORT_SYMBOL(msm_gpiomux_put);
+
+static int __init gpiomux_init(void)
+{
+	unsigned n;
+
+	for (n = 0; n < GPIOMUX_NGPIOS; ++n) {
+		msm_gpiomux_configs[n].ref = 0;
+		if (!(msm_gpiomux_configs[n].suspended & GPIOMUX_VALID))
+			continue;
+		__msm_gpiomux_write(n, msm_gpiomux_configs[n].suspended);
+	}
+	return 0;
+}
+postcore_initcall(gpiomux_init);
diff --git a/arch/arm/mach-msm/gpiomux.h b/arch/arm/mach-msm/gpiomux.h
new file mode 100644
index 00000000000..b178d9cb742
--- /dev/null
+++ b/arch/arm/mach-msm/gpiomux.h
@@ -0,0 +1,114 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+#ifndef __ARCH_ARM_MACH_MSM_GPIOMUX_H
+#define __ARCH_ARM_MACH_MSM_GPIOMUX_H
+
+#include <linux/bitops.h>
+#include <linux/errno.h>
+
+#if defined(CONFIG_MSM_V2_TLMM)
+#include "gpiomux-v2.h"
+#else
+#include "gpiomux-v1.h"
+#endif
+
+/**
+ * struct msm_gpiomux_config: gpiomux settings for one gpio line.
+ *
+ * A complete gpiomux config is the bitwise-or of a drive-strength,
+ * function, and pull.  For functions other than GPIO, the OE
+ * is hard-wired according to the function.  For GPIO mode,
+ * OE is controlled by gpiolib.
+ *
+ * Available settings differ by target; see the gpiomux header
+ * specific to your target arch for available configurations.
+ *
+ * @active: The configuration to be installed when the line is
+ * active, or its reference count is > 0.
+ * @suspended: The configuration to be installed when the line
+ * is suspended, or its reference count is 0.
+ * @ref: The reference count of the line.  For internal use of
+ * the gpiomux framework only.
+ */
+struct msm_gpiomux_config {
+	gpiomux_config_t active;
+	gpiomux_config_t suspended;
+	unsigned         ref;
+};
+
+/**
+ * @GPIOMUX_VALID:	If set, the config field contains 'good data'.
+ *                      The absence of this bit will prevent the gpiomux
+ *			system from applying the configuration under all
+ *			circumstances.
+ */
+enum {
+	GPIOMUX_VALID	 = BIT(sizeof(gpiomux_config_t) * BITS_PER_BYTE - 1),
+	GPIOMUX_CTL_MASK = GPIOMUX_VALID,
+};
+
+#ifdef CONFIG_MSM_GPIOMUX
+
+/* Each architecture must provide its own instance of this table.
+ * To avoid having gpiomux manage any given gpio, one or both of
+ * the entries can avoid setting GPIOMUX_VALID - the absence
+ * of that flag will prevent the configuration from being applied
+ * during state transitions.
+ */
+extern struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS];
+
+/* Increment a gpio's reference count, possibly activating the line. */
+int __must_check msm_gpiomux_get(unsigned gpio);
+
+/* Decrement a gpio's reference count, possibly suspending the line. */
+int msm_gpiomux_put(unsigned gpio);
+
+/* Install a new configuration to the gpio line.  To avoid overwriting
+ * a configuration, leave the VALID bit out.
+ */
+int msm_gpiomux_write(unsigned gpio,
+		      gpiomux_config_t active,
+		      gpiomux_config_t suspended);
+
+/* Architecture-internal function for use by the framework only.
+ * This function can assume the following:
+ * - the gpio value has passed a bounds-check
+ * - the gpiomux spinlock has been obtained
+ *
+ * This function is not for public consumption.  External users
+ * should use msm_gpiomux_write.
+ */
+void __msm_gpiomux_write(unsigned gpio, gpiomux_config_t val);
+#else
+static inline int __must_check msm_gpiomux_get(unsigned gpio)
+{
+	return -ENOSYS;
+}
+
+static inline int msm_gpiomux_put(unsigned gpio)
+{
+	return -ENOSYS;
+}
+
+static inline int msm_gpiomux_write(unsigned gpio,
+				    gpiomux_config_t active,
+				    gpiomux_config_t suspended)
+{
+	return -ENOSYS;
+}
+#endif
+#endif
diff --git a/arch/arm/mach-msm/include/mach/board.h b/arch/arm/mach-msm/include/mach/board.h
index 5a79bcf5041..6abf4a6eadc 100644
--- a/arch/arm/mach-msm/include/mach/board.h
+++ b/arch/arm/mach-msm/include/mach/board.h
@@ -33,6 +33,8 @@ struct msm_acpu_clock_platform_data
 
 struct clk;
 
+extern struct sys_timer msm_timer;
+
 /* common init routines for use by arch/arm/mach-msm/board-*.c */
 
 void __init msm_add_devices(void);
diff --git a/arch/arm/mach-msm/include/mach/debug-macro.S b/arch/arm/mach-msm/include/mach/debug-macro.S
index 528750f307e..fbd5d90dcc8 100644
--- a/arch/arm/mach-msm/include/mach/debug-macro.S
+++ b/arch/arm/mach-msm/include/mach/debug-macro.S
@@ -19,13 +19,10 @@
 #include <mach/hardware.h>
 #include <mach/msm_iomap.h>
 
-#ifdef CONFIG_MSM_DEBUG_UART
-	.macro	addruart, rx, tmp
-	@ see if the MMU is enabled and select appropriate base address
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1
-	ldreq	\rx, =MSM_DEBUG_UART_PHYS
-	ldrne	\rx, =MSM_DEBUG_UART_BASE
+#ifdef CONFIG_HAS_MSM_DEBUG_UART_PHYS
+	.macro	addruart, rp, rv
+	ldr	\rp, =MSM_DEBUG_UART_PHYS
+	ldr	\rv, =MSM_DEBUG_UART_BASE
 	.endm
 
 	.macro	senduart,rd,rx
@@ -39,16 +36,7 @@
 	tst	\rd, #0x04
 	beq	1001b
 	.endm
-#else
-	.macro	addruart, rx, tmp
-	.endm
-
-	.macro	senduart,rd,rx
-	.endm
-
-	.macro	waituart,rd,rx
-	.endm
-#endif
 
 	.macro	busyuart,rd,rx
 	.endm
+#endif
diff --git a/arch/arm/mach-msm/include/mach/dma.h b/arch/arm/mach-msm/include/mach/dma.h
index 00f9bbfadbe..05583f56952 100644
--- a/arch/arm/mach-msm/include/mach/dma.h
+++ b/arch/arm/mach-msm/include/mach/dma.h
@@ -32,10 +32,18 @@ struct msm_dmov_cmd {
 	void *data;
 };
 
+#ifndef CONFIG_ARCH_MSM8X60
 void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd);
 void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd, int graceful);
 int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr);
-
+#else
+static inline
+void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd) { }
+static inline
+void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd, int graceful) { }
+static inline
+int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr) { return -EIO; }
+#endif
 
 
 #define DMOV_SD0(off, ch) (MSM_DMOV_BASE + 0x0000 + (off) + ((ch) << 2))
diff --git a/arch/arm/mach-msm/include/mach/entry-macro-qgic.S b/arch/arm/mach-msm/include/mach/entry-macro-qgic.S
new file mode 100644
index 00000000000..4dc99aa65d0
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/entry-macro-qgic.S
@@ -0,0 +1,88 @@
+/*
+ * Low-level IRQ helper macros
+ *
+ * Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/hardware.h>
+#include <asm/hardware/gic.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+	ldr	\base, =gic_cpu_base_addr
+	ldr	\base, [\base]
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	/*
+	 * The interrupt numbering scheme is defined in the
+	 * interrupt controller spec.  To wit:
+	 *
+	 * Migrated the code from ARM MP port to be more consistant
+	 * with interrupt processing , the following still holds true
+	 * however, all interrupts are treated the same regardless of
+	 * if they are local IPI or PPI
+	 *
+	 * Interrupts 0-15 are IPI
+	 * 16-31 are PPI
+	 *   (16-18 are the timers)
+	 * 32-1020 are global
+	 * 1021-1022 are reserved
+	 * 1023 is "spurious" (no interrupt)
+	 *
+	 * A simple read from the controller will tell us the number of the
+	 * highest priority enabled interrupt.  We then just need to check
+	 * whether it is in the valid range for an IRQ (0-1020 inclusive).
+	 *
+	 * Base ARM code assumes that the local (private) peripheral interrupts
+	 * are not valid, we treat them differently, in that the privates are
+	 * handled like normal shared interrupts with the exception that only
+	 * one processor can register the interrupt and the handler must be
+	 * the same for all processors.
+	 */
+
+	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+	ldr  \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 =srcCPU,
+						   9-0 =int # */
+
+	bic     \irqnr, \irqstat, #0x1c00	@mask src
+	cmp     \irqnr, #15
+	ldr		\tmp, =1021
+	cmpcc	\irqnr, \irqnr
+	cmpne	\irqnr, \tmp
+	cmpcs	\irqnr, \irqnr
+
+	.endm
+
+	/* We assume that irqstat (the raw value of the IRQ acknowledge
+	 * register) is preserved from the macro above.
+	 * If there is an IPI, we immediately signal end of interrupt on the
+	 * controller, since this requires the original irqstat value which
+	 * we won't easily be able to recreate later.
+	 */
+	.macro test_for_ipi, irqnr, irqstat, base, tmp
+    bic \irqnr, \irqstat, #0x1c00
+    cmp \irqnr, #16
+    strcc   \irqstat, [\base, #GIC_CPU_EOI]
+    cmpcs   \irqnr, \irqnr
+	.endm
+
+	/* As above, this assumes that irqstat and base are preserved.. */
+
+	.macro test_for_ltirq, irqnr, irqstat, base, tmp
+    bic \irqnr, \irqstat, #0x1c00
+    mov     \tmp, #0
+    cmp \irqnr, #16
+    moveq   \tmp, #1
+    streq   \irqstat, [\base, #GIC_CPU_EOI]
+    cmp \tmp, #0
+	.endm
diff --git a/arch/arm/mach-msm/include/mach/entry-macro-vic.S b/arch/arm/mach-msm/include/mach/entry-macro-vic.S
new file mode 100644
index 00000000000..70563ed11b3
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/entry-macro-vic.S
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <mach/msm_iomap.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro	get_irqnr_preamble, base, tmp
+	@ enable imprecise aborts
+	cpsie	a
+	mov	\base, #MSM_VIC_BASE
+	.endm
+
+	.macro	arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+	@ 0xD0 has irq# or old irq# if the irq has been handled
+	@ 0xD4 has irq# or -1 if none pending *but* if you just
+	@ read 0xD4 you never get the first irq for some reason
+	ldr	\irqnr, [\base, #0xD0]
+	ldr	\irqnr, [\base, #0xD4]
+	cmp	\irqnr, #0xffffffff
+	.endm
diff --git a/arch/arm/mach-msm/include/mach/entry-macro.S b/arch/arm/mach-msm/include/mach/entry-macro.S
index d2259486bcb..b16f082eeb6 100644
--- a/arch/arm/mach-msm/include/mach/entry-macro.S
+++ b/arch/arm/mach-msm/include/mach/entry-macro.S
@@ -1,38 +1,23 @@
-/* arch/arm/mach-msm7200/include/mach/entry-macro.S
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
  *
- * Copyright (C) 2007 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
  */
 
-#include <mach/msm_iomap.h>
-
- 	.macro	disable_fiq
-	.endm
-
-	.macro	get_irqnr_preamble, base, tmp
-	@ enable imprecise aborts
-	cpsie	a
-	mov	\base, #MSM_VIC_BASE
-	.endm
-
-	.macro	arch_ret_to_user, tmp1, tmp2
-	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-	@ 0xD0 has irq# or old irq# if the irq has been handled
-	@ 0xD4 has irq# or -1 if none pending *but* if you just
-	@ read 0xD4 you never get the first irq for some reason
-	ldr	\irqnr, [\base, #0xD0]
-	ldr	\irqnr, [\base, #0xD4]
-	cmp	\irqnr, #0xffffffff
-	.endm
+#if defined(CONFIG_ARM_GIC)
+#include <mach/entry-macro-qgic.S>
+#else
+#include <mach/entry-macro-vic.S>
+#endif
diff --git a/arch/arm/mach-msm/include/mach/gpio.h b/arch/arm/mach-msm/include/mach/gpio.h
index 83e47c0d5c2..36ad50d3bfa 100644
--- a/arch/arm/mach-msm/include/mach/gpio.h
+++ b/arch/arm/mach-msm/include/mach/gpio.h
@@ -23,127 +23,4 @@
 #define gpio_cansleep   __gpio_cansleep
 #define gpio_to_irq     __gpio_to_irq
 
-/**
- * struct msm_gpio - GPIO pin description
- * @gpio_cfg - configuration bitmap, as per gpio_tlmm_config()
- * @label - textual label
- *
- * Usually, GPIO's are operated by sets.
- * This struct accumulate all GPIO information in single source
- * and facilitete group operations provided by msm_gpios_xxx()
- */
-struct msm_gpio {
-	u32 gpio_cfg;
-	const char *label;
-};
-
-/**
- * msm_gpios_request_enable() - request and enable set of GPIOs
- *
- * Request and configure set of GPIO's
- * In case of error, all operations rolled back.
- * Return error code.
- *
- * @table: GPIO table
- * @size:  number of entries in @table
- */
-int msm_gpios_request_enable(const struct msm_gpio *table, int size);
-
-/**
- * msm_gpios_disable_free() - disable and free set of GPIOs
- *
- * @table: GPIO table
- * @size:  number of entries in @table
- */
-void msm_gpios_disable_free(const struct msm_gpio *table, int size);
-
-/**
- * msm_gpios_request() - request set of GPIOs
- * In case of error, all operations rolled back.
- * Return error code.
- *
- * @table: GPIO table
- * @size:  number of entries in @table
- */
-int msm_gpios_request(const struct msm_gpio *table, int size);
-
-/**
- * msm_gpios_free() - free set of GPIOs
- *
- * @table: GPIO table
- * @size:  number of entries in @table
- */
-void msm_gpios_free(const struct msm_gpio *table, int size);
-
-/**
- * msm_gpios_enable() - enable set of GPIOs
- * In case of error, all operations rolled back.
- * Return error code.
- *
- * @table: GPIO table
- * @size:  number of entries in @table
- */
-int msm_gpios_enable(const struct msm_gpio *table, int size);
-
-/**
- * msm_gpios_disable() - disable set of GPIOs
- *
- * @table: GPIO table
- * @size:  number of entries in @table
- */
-void msm_gpios_disable(const struct msm_gpio *table, int size);
-
-/* GPIO TLMM (Top Level Multiplexing) Definitions */
-
-/* GPIO TLMM: Function -- GPIO specific */
-
-/* GPIO TLMM: Direction */
-enum {
-	GPIO_INPUT,
-	GPIO_OUTPUT,
-};
-
-/* GPIO TLMM: Pullup/Pulldown */
-enum {
-	GPIO_NO_PULL,
-	GPIO_PULL_DOWN,
-	GPIO_KEEPER,
-	GPIO_PULL_UP,
-};
-
-/* GPIO TLMM: Drive Strength */
-enum {
-	GPIO_2MA,
-	GPIO_4MA,
-	GPIO_6MA,
-	GPIO_8MA,
-	GPIO_10MA,
-	GPIO_12MA,
-	GPIO_14MA,
-	GPIO_16MA,
-};
-
-enum {
-	GPIO_ENABLE,
-	GPIO_DISABLE,
-};
-
-#define GPIO_CFG(gpio, func, dir, pull, drvstr) \
-	((((gpio) & 0x3FF) << 4)        |	  \
-	 ((func) & 0xf)                  |	  \
-	 (((dir) & 0x1) << 14)           |	  \
-	 (((pull) & 0x3) << 15)          |	  \
-	 (((drvstr) & 0xF) << 17))
-
-/**
- * extract GPIO pin from bit-field used for gpio_tlmm_config
- */
-#define GPIO_PIN(gpio_cfg)    (((gpio_cfg) >>  4) & 0x3ff)
-#define GPIO_FUNC(gpio_cfg)   (((gpio_cfg) >>  0) & 0xf)
-#define GPIO_DIR(gpio_cfg)    (((gpio_cfg) >> 14) & 0x1)
-#define GPIO_PULL(gpio_cfg)   (((gpio_cfg) >> 15) & 0x3)
-#define GPIO_DRVSTR(gpio_cfg) (((gpio_cfg) >> 17) & 0xf)
-
-int gpio_tlmm_config(unsigned config, unsigned disable);
-
 #endif /* __ASM_ARCH_MSM_GPIO_H */
diff --git a/arch/arm/mach-msm/include/mach/io.h b/arch/arm/mach-msm/include/mach/io.h
index c35b29f9ac0..7386e732baa 100644
--- a/arch/arm/mach-msm/include/mach/io.h
+++ b/arch/arm/mach-msm/include/mach/io.h
@@ -28,6 +28,7 @@ void __iomem *__msm_ioremap(unsigned long phys_addr, size_t size, unsigned int m
 
 void msm_map_qsd8x50_io(void);
 void msm_map_msm7x30_io(void);
+void msm_map_msm8x60_io(void);
 
 extern unsigned int msm_shared_ram_phys;
 
diff --git a/arch/arm/mach-msm/include/mach/iommu.h b/arch/arm/mach-msm/include/mach/iommu.h
new file mode 100644
index 00000000000..218ef5732a2
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/iommu.h
@@ -0,0 +1,103 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef MSM_IOMMU_H
+#define MSM_IOMMU_H
+
+#include <linux/interrupt.h>
+
+/* Maximum number of Machine IDs that we are allowing to be mapped to the same
+ * context bank. The number of MIDs mapped to the same CB does not affect
+ * performance, but there is a practical limit on how many distinct MIDs may
+ * be present. These mappings are typically determined at design time and are
+ * not expected to change at run time.
+ */
+#define MAX_NUM_MIDS	16
+
+/**
+ * struct msm_iommu_dev - a single IOMMU hardware instance
+ * name		Human-readable name given to this IOMMU HW instance
+ * clk_rate	Rate to set for this IOMMU's clock, if applicable to this
+ *		particular IOMMU. 0 means don't set a rate.
+ *		-1 means it is an AXI clock with no valid rate
+ *
+ */
+struct msm_iommu_dev {
+	const char *name;
+	int clk_rate;
+};
+
+/**
+ * struct msm_iommu_ctx_dev - an IOMMU context bank instance
+ * name		Human-readable name given to this context bank
+ * num		Index of this context bank within the hardware
+ * mids		List of Machine IDs that are to be mapped into this context
+ *		bank, terminated by -1. The MID is a set of signals on the
+ *		AXI bus that identifies the function associated with a specific
+ *		memory request. (See ARM spec).
+ */
+struct msm_iommu_ctx_dev {
+	const char *name;
+	int num;
+	int mids[MAX_NUM_MIDS];
+};
+
+
+/**
+ * struct msm_iommu_drvdata - A single IOMMU hardware instance
+ * @base:	IOMMU config port base address (VA)
+ * @irq:	Interrupt number
+  *
+ * A msm_iommu_drvdata holds the global driver data about a single piece
+ * of an IOMMU hardware instance.
+ */
+struct msm_iommu_drvdata {
+	void __iomem *base;
+	int irq;
+};
+
+/**
+ * struct msm_iommu_ctx_drvdata - an IOMMU context bank instance
+ * @num:		Hardware context number of this context
+ * @pdev:		Platform device associated wit this HW instance
+ * @attached_elm:	List element for domains to track which devices are
+ *			attached to them
+ *
+ * A msm_iommu_ctx_drvdata holds the driver data for a single context bank
+ * within each IOMMU hardware instance
+ */
+struct msm_iommu_ctx_drvdata {
+	int num;
+	struct platform_device *pdev;
+	struct list_head attached_elm;
+};
+
+/*
+ * Look up an IOMMU context device by its context name. NULL if none found.
+ * Useful for testing and drivers that do not yet fully have IOMMU stuff in
+ * their platform devices.
+ */
+struct device *msm_iommu_get_ctx(const char *ctx_name);
+
+/*
+ * Interrupt handler for the IOMMU context fault interrupt. Hooking the
+ * interrupt is not supported in the API yet, but this will print an error
+ * message and dump useful IOMMU registers.
+ */
+irqreturn_t msm_iommu_fault_handler(int irq, void *dev_id);
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/iommu_hw-8xxx.h b/arch/arm/mach-msm/include/mach/iommu_hw-8xxx.h
new file mode 100644
index 00000000000..f9386d3a2f7
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/iommu_hw-8xxx.h
@@ -0,0 +1,1871 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef __ARCH_ARM_MACH_MSM_IOMMU_HW_8XXX_H
+#define __ARCH_ARM_MACH_MSM_IOMMU_HW_8XXX_H
+
+#define CTX_SHIFT 12
+
+#define GET_GLOBAL_REG(reg, base) (readl((base) + (reg)))
+#define GET_CTX_REG(reg, base, ctx) \
+				(readl((base) + (reg) + ((ctx) << CTX_SHIFT)))
+
+#define SET_GLOBAL_REG(reg, base, val)	writel((val), ((base) + (reg)))
+
+#define SET_CTX_REG(reg, base, ctx, val) \
+			writel((val), ((base) + (reg) + ((ctx) << CTX_SHIFT)))
+
+/* Wrappers for numbered registers */
+#define SET_GLOBAL_REG_N(b, n, r, v) SET_GLOBAL_REG(b, ((r) + (n << 2)), (v))
+#define GET_GLOBAL_REG_N(b, n, r)    GET_GLOBAL_REG(b, ((r) + (n << 2)))
+
+/* Field wrappers */
+#define GET_GLOBAL_FIELD(b, r, F)    GET_FIELD(((b) + (r)), F##_MASK, F##_SHIFT)
+#define GET_CONTEXT_FIELD(b, c, r, F)	\
+	GET_FIELD(((b) + (r) + ((c) << CTX_SHIFT)), F##_MASK, F##_SHIFT)
+
+#define SET_GLOBAL_FIELD(b, r, F, v) \
+	SET_FIELD(((b) + (r)), F##_MASK, F##_SHIFT, (v))
+#define SET_CONTEXT_FIELD(b, c, r, F, v)	\
+	SET_FIELD(((b) + (r) + ((c) << CTX_SHIFT)), F##_MASK, F##_SHIFT, (v))
+
+#define GET_FIELD(addr, mask, shift)  ((readl(addr) >> (shift)) & (mask))
+
+#define SET_FIELD(addr, mask, shift, v) \
+do { \
+	int t = readl(addr); \
+	writel((t & ~((mask) << (shift))) + (((v) & (mask)) << (shift)), addr);\
+} while (0)
+
+
+#define NUM_FL_PTE	4096
+#define NUM_SL_PTE	256
+
+/* First-level page table bits */
+#define FL_BASE_MASK		0xFFFFFC00
+#define FL_TYPE_TABLE		(1 << 0)
+#define FL_TYPE_SECT		(2 << 0)
+#define FL_SUPERSECTION		(1 << 18)
+#define FL_AP_WRITE		(1 << 10)
+#define FL_AP_READ		(1 << 11)
+#define FL_SHARED		(1 << 16)
+#define FL_OFFSET(va)		(((va) & 0xFFF00000) >> 20)
+
+/* Second-level page table bits */
+#define SL_BASE_MASK_LARGE	0xFFFF0000
+#define SL_BASE_MASK_SMALL	0xFFFFF000
+#define SL_TYPE_LARGE		(1 << 0)
+#define SL_TYPE_SMALL		(2 << 0)
+#define SL_AP0			(1 << 4)
+#define SL_AP1			(2 << 4)
+#define SL_SHARED		(1 << 10)
+#define SL_OFFSET(va)		(((va) & 0xFF000) >> 12)
+
+/* Global register setters / getters */
+#define SET_M2VCBR_N(b, N, v)	 SET_GLOBAL_REG_N(M2VCBR_N, N, (b), (v))
+#define SET_CBACR_N(b, N, v)	 SET_GLOBAL_REG_N(CBACR_N, N, (b), (v))
+#define SET_TLBRSW(b, v)	 SET_GLOBAL_REG(TLBRSW, (b), (v))
+#define SET_TLBTR0(b, v)	 SET_GLOBAL_REG(TLBTR0, (b), (v))
+#define SET_TLBTR1(b, v)	 SET_GLOBAL_REG(TLBTR1, (b), (v))
+#define SET_TLBTR2(b, v)	 SET_GLOBAL_REG(TLBTR2, (b), (v))
+#define SET_TESTBUSCR(b, v)	 SET_GLOBAL_REG(TESTBUSCR, (b), (v))
+#define SET_GLOBAL_TLBIALL(b, v) SET_GLOBAL_REG(GLOBAL_TLBIALL, (b), (v))
+#define SET_TLBIVMID(b, v)	 SET_GLOBAL_REG(TLBIVMID, (b), (v))
+#define SET_CR(b, v)		 SET_GLOBAL_REG(CR, (b), (v))
+#define SET_EAR(b, v)		 SET_GLOBAL_REG(EAR, (b), (v))
+#define SET_ESR(b, v)		 SET_GLOBAL_REG(ESR, (b), (v))
+#define SET_ESRRESTORE(b, v)	 SET_GLOBAL_REG(ESRRESTORE, (b), (v))
+#define SET_ESYNR0(b, v)	 SET_GLOBAL_REG(ESYNR0, (b), (v))
+#define SET_ESYNR1(b, v)	 SET_GLOBAL_REG(ESYNR1, (b), (v))
+#define SET_RPU_ACR(b, v)	 SET_GLOBAL_REG(RPU_ACR, (b), (v))
+
+#define GET_M2VCBR_N(b, N)	 GET_GLOBAL_REG_N(M2VCBR_N, N, (b))
+#define GET_CBACR_N(b, N)	 GET_GLOBAL_REG_N(CBACR_N, N, (b))
+#define GET_TLBTR0(b)		 GET_GLOBAL_REG(TLBTR0, (b))
+#define GET_TLBTR1(b)		 GET_GLOBAL_REG(TLBTR1, (b))
+#define GET_TLBTR2(b)		 GET_GLOBAL_REG(TLBTR2, (b))
+#define GET_TESTBUSCR(b)	 GET_GLOBAL_REG(TESTBUSCR, (b))
+#define GET_GLOBAL_TLBIALL(b)	 GET_GLOBAL_REG(GLOBAL_TLBIALL, (b))
+#define GET_TLBIVMID(b)		 GET_GLOBAL_REG(TLBIVMID, (b))
+#define GET_CR(b)		 GET_GLOBAL_REG(CR, (b))
+#define GET_EAR(b)		 GET_GLOBAL_REG(EAR, (b))
+#define GET_ESR(b)		 GET_GLOBAL_REG(ESR, (b))
+#define GET_ESRRESTORE(b)	 GET_GLOBAL_REG(ESRRESTORE, (b))
+#define GET_ESYNR0(b)		 GET_GLOBAL_REG(ESYNR0, (b))
+#define GET_ESYNR1(b)		 GET_GLOBAL_REG(ESYNR1, (b))
+#define GET_REV(b)		 GET_GLOBAL_REG(REV, (b))
+#define GET_IDR(b)		 GET_GLOBAL_REG(IDR, (b))
+#define GET_RPU_ACR(b)		 GET_GLOBAL_REG(RPU_ACR, (b))
+
+
+/* Context register setters/getters */
+#define SET_SCTLR(b, c, v)	 SET_CTX_REG(SCTLR, (b), (c), (v))
+#define SET_ACTLR(b, c, v)	 SET_CTX_REG(ACTLR, (b), (c), (v))
+#define SET_CONTEXTIDR(b, c, v)	 SET_CTX_REG(CONTEXTIDR, (b), (c), (v))
+#define SET_TTBR0(b, c, v)	 SET_CTX_REG(TTBR0, (b), (c), (v))
+#define SET_TTBR1(b, c, v)	 SET_CTX_REG(TTBR1, (b), (c), (v))
+#define SET_TTBCR(b, c, v)	 SET_CTX_REG(TTBCR, (b), (c), (v))
+#define SET_PAR(b, c, v)	 SET_CTX_REG(PAR, (b), (c), (v))
+#define SET_FSR(b, c, v)	 SET_CTX_REG(FSR, (b), (c), (v))
+#define SET_FSRRESTORE(b, c, v)	 SET_CTX_REG(FSRRESTORE, (b), (c), (v))
+#define SET_FAR(b, c, v)	 SET_CTX_REG(FAR, (b), (c), (v))
+#define SET_FSYNR0(b, c, v)	 SET_CTX_REG(FSYNR0, (b), (c), (v))
+#define SET_FSYNR1(b, c, v)	 SET_CTX_REG(FSYNR1, (b), (c), (v))
+#define SET_PRRR(b, c, v)	 SET_CTX_REG(PRRR, (b), (c), (v))
+#define SET_NMRR(b, c, v)	 SET_CTX_REG(NMRR, (b), (c), (v))
+#define SET_TLBLKCR(b, c, v)	 SET_CTX_REG(TLBLCKR, (b), (c), (v))
+#define SET_V2PSR(b, c, v)	 SET_CTX_REG(V2PSR, (b), (c), (v))
+#define SET_TLBFLPTER(b, c, v)	 SET_CTX_REG(TLBFLPTER, (b), (c), (v))
+#define SET_TLBSLPTER(b, c, v)	 SET_CTX_REG(TLBSLPTER, (b), (c), (v))
+#define SET_BFBCR(b, c, v)	 SET_CTX_REG(BFBCR, (b), (c), (v))
+#define SET_CTX_TLBIALL(b, c, v) SET_CTX_REG(CTX_TLBIALL, (b), (c), (v))
+#define SET_TLBIASID(b, c, v)	 SET_CTX_REG(TLBIASID, (b), (c), (v))
+#define SET_TLBIVA(b, c, v)	 SET_CTX_REG(TLBIVA, (b), (c), (v))
+#define SET_TLBIVAA(b, c, v)	 SET_CTX_REG(TLBIVAA, (b), (c), (v))
+#define SET_V2PPR(b, c, v)	 SET_CTX_REG(V2PPR, (b), (c), (v))
+#define SET_V2PPW(b, c, v)	 SET_CTX_REG(V2PPW, (b), (c), (v))
+#define SET_V2PUR(b, c, v)	 SET_CTX_REG(V2PUR, (b), (c), (v))
+#define SET_V2PUW(b, c, v)	 SET_CTX_REG(V2PUW, (b), (c), (v))
+#define SET_RESUME(b, c, v)	 SET_CTX_REG(RESUME, (b), (c), (v))
+
+#define GET_SCTLR(b, c)		 GET_CTX_REG(SCTLR, (b), (c))
+#define GET_ACTLR(b, c)		 GET_CTX_REG(ACTLR, (b), (c))
+#define GET_CONTEXTIDR(b, c)	 GET_CTX_REG(CONTEXTIDR, (b), (c))
+#define GET_TTBR0(b, c)		 GET_CTX_REG(TTBR0, (b), (c))
+#define GET_TTBR1(b, c)		 GET_CTX_REG(TTBR1, (b), (c))
+#define GET_TTBCR(b, c)		 GET_CTX_REG(TTBCR, (b), (c))
+#define GET_PAR(b, c)		 GET_CTX_REG(PAR, (b), (c))
+#define GET_FSR(b, c)		 GET_CTX_REG(FSR, (b), (c))
+#define GET_FSRRESTORE(b, c)	 GET_CTX_REG(FSRRESTORE, (b), (c))
+#define GET_FAR(b, c)		 GET_CTX_REG(FAR, (b), (c))
+#define GET_FSYNR0(b, c)	 GET_CTX_REG(FSYNR0, (b), (c))
+#define GET_FSYNR1(b, c)	 GET_CTX_REG(FSYNR1, (b), (c))
+#define GET_PRRR(b, c)		 GET_CTX_REG(PRRR, (b), (c))
+#define GET_NMRR(b, c)		 GET_CTX_REG(NMRR, (b), (c))
+#define GET_TLBLCKR(b, c)	 GET_CTX_REG(TLBLCKR, (b), (c))
+#define GET_V2PSR(b, c)		 GET_CTX_REG(V2PSR, (b), (c))
+#define GET_TLBFLPTER(b, c)	 GET_CTX_REG(TLBFLPTER, (b), (c))
+#define GET_TLBSLPTER(b, c)	 GET_CTX_REG(TLBSLPTER, (b), (c))
+#define GET_BFBCR(b, c)		 GET_CTX_REG(BFBCR, (b), (c))
+#define GET_CTX_TLBIALL(b, c)	 GET_CTX_REG(CTX_TLBIALL, (b), (c))
+#define GET_TLBIASID(b, c)	 GET_CTX_REG(TLBIASID, (b), (c))
+#define GET_TLBIVA(b, c)	 GET_CTX_REG(TLBIVA, (b), (c))
+#define GET_TLBIVAA(b, c)	 GET_CTX_REG(TLBIVAA, (b), (c))
+#define GET_V2PPR(b, c)		 GET_CTX_REG(V2PPR, (b), (c))
+#define GET_V2PPW(b, c)		 GET_CTX_REG(V2PPW, (b), (c))
+#define GET_V2PUR(b, c)		 GET_CTX_REG(V2PUR, (b), (c))
+#define GET_V2PUW(b, c)		 GET_CTX_REG(V2PUW, (b), (c))
+#define GET_RESUME(b, c)	 GET_CTX_REG(RESUME, (b), (c))
+
+
+/* Global field setters / getters */
+/* Global Field Setters: */
+/* CBACR_N */
+#define SET_RWVMID(b, n, v)   SET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), RWVMID, v)
+#define SET_RWE(b, n, v)      SET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), RWE, v)
+#define SET_RWGE(b, n, v)     SET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), RWGE, v)
+#define SET_CBVMID(b, n, v)   SET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), CBVMID, v)
+#define SET_IRPTNDX(b, n, v)  SET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), IRPTNDX, v)
+
+
+/* M2VCBR_N */
+#define SET_VMID(b, n, v)     SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), VMID, v)
+#define SET_CBNDX(b, n, v)    SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), CBNDX, v)
+#define SET_BYPASSD(b, n, v)  SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BYPASSD, v)
+#define SET_BPRCOSH(b, n, v)  SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPRCOSH, v)
+#define SET_BPRCISH(b, n, v)  SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPRCISH, v)
+#define SET_BPRCNSH(b, n, v)  SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPRCNSH, v)
+#define SET_BPSHCFG(b, n, v)  SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPSHCFG, v)
+#define SET_NSCFG(b, n, v)    SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), NSCFG, v)
+#define SET_BPMTCFG(b, n, v)  SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPMTCFG, v)
+#define SET_BPMEMTYPE(b, n, v) \
+	SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPMEMTYPE, v)
+
+
+/* CR */
+#define SET_RPUE(b, v)		 SET_GLOBAL_FIELD(b, CR, RPUE, v)
+#define SET_RPUERE(b, v)	 SET_GLOBAL_FIELD(b, CR, RPUERE, v)
+#define SET_RPUEIE(b, v)	 SET_GLOBAL_FIELD(b, CR, RPUEIE, v)
+#define SET_DCDEE(b, v)		 SET_GLOBAL_FIELD(b, CR, DCDEE, v)
+#define SET_CLIENTPD(b, v)       SET_GLOBAL_FIELD(b, CR, CLIENTPD, v)
+#define SET_STALLD(b, v)	 SET_GLOBAL_FIELD(b, CR, STALLD, v)
+#define SET_TLBLKCRWE(b, v)      SET_GLOBAL_FIELD(b, CR, TLBLKCRWE, v)
+#define SET_CR_TLBIALLCFG(b, v)  SET_GLOBAL_FIELD(b, CR, CR_TLBIALLCFG, v)
+#define SET_TLBIVMIDCFG(b, v)    SET_GLOBAL_FIELD(b, CR, TLBIVMIDCFG, v)
+#define SET_CR_HUME(b, v)        SET_GLOBAL_FIELD(b, CR, CR_HUME, v)
+
+
+/* ESR */
+#define SET_CFG(b, v)		 SET_GLOBAL_FIELD(b, ESR, CFG, v)
+#define SET_BYPASS(b, v)	 SET_GLOBAL_FIELD(b, ESR, BYPASS, v)
+#define SET_ESR_MULTI(b, v)      SET_GLOBAL_FIELD(b, ESR, ESR_MULTI, v)
+
+
+/* ESYNR0 */
+#define SET_ESYNR0_AMID(b, v)    SET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_AMID, v)
+#define SET_ESYNR0_APID(b, v)    SET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_APID, v)
+#define SET_ESYNR0_ABID(b, v)    SET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_ABID, v)
+#define SET_ESYNR0_AVMID(b, v)   SET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_AVMID, v)
+#define SET_ESYNR0_ATID(b, v)    SET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_ATID, v)
+
+
+/* ESYNR1 */
+#define SET_ESYNR1_AMEMTYPE(b, v) \
+			SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AMEMTYPE, v)
+#define SET_ESYNR1_ASHARED(b, v)  SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ASHARED, v)
+#define SET_ESYNR1_AINNERSHARED(b, v) \
+			SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AINNERSHARED, v)
+#define SET_ESYNR1_APRIV(b, v)   SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_APRIV, v)
+#define SET_ESYNR1_APROTNS(b, v) SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_APROTNS, v)
+#define SET_ESYNR1_AINST(b, v)   SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AINST, v)
+#define SET_ESYNR1_AWRITE(b, v)  SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AWRITE, v)
+#define SET_ESYNR1_ABURST(b, v)  SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ABURST, v)
+#define SET_ESYNR1_ALEN(b, v)    SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ALEN, v)
+#define SET_ESYNR1_ASIZE(b, v)   SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ASIZE, v)
+#define SET_ESYNR1_ALOCK(b, v)   SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ALOCK, v)
+#define SET_ESYNR1_AOOO(b, v)    SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AOOO, v)
+#define SET_ESYNR1_AFULL(b, v)   SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AFULL, v)
+#define SET_ESYNR1_AC(b, v)      SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AC, v)
+#define SET_ESYNR1_DCD(b, v)     SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_DCD, v)
+
+
+/* TESTBUSCR */
+#define SET_TBE(b, v)		 SET_GLOBAL_FIELD(b, TESTBUSCR, TBE, v)
+#define SET_SPDMBE(b, v)	 SET_GLOBAL_FIELD(b, TESTBUSCR, SPDMBE, v)
+#define SET_WGSEL(b, v)		 SET_GLOBAL_FIELD(b, TESTBUSCR, WGSEL, v)
+#define SET_TBLSEL(b, v)	 SET_GLOBAL_FIELD(b, TESTBUSCR, TBLSEL, v)
+#define SET_TBHSEL(b, v)	 SET_GLOBAL_FIELD(b, TESTBUSCR, TBHSEL, v)
+#define SET_SPDM0SEL(b, v)       SET_GLOBAL_FIELD(b, TESTBUSCR, SPDM0SEL, v)
+#define SET_SPDM1SEL(b, v)       SET_GLOBAL_FIELD(b, TESTBUSCR, SPDM1SEL, v)
+#define SET_SPDM2SEL(b, v)       SET_GLOBAL_FIELD(b, TESTBUSCR, SPDM2SEL, v)
+#define SET_SPDM3SEL(b, v)       SET_GLOBAL_FIELD(b, TESTBUSCR, SPDM3SEL, v)
+
+
+/* TLBIVMID */
+#define SET_TLBIVMID_VMID(b, v)  SET_GLOBAL_FIELD(b, TLBIVMID, TLBIVMID_VMID, v)
+
+
+/* TLBRSW */
+#define SET_TLBRSW_INDEX(b, v)   SET_GLOBAL_FIELD(b, TLBRSW, TLBRSW_INDEX, v)
+#define SET_TLBBFBS(b, v)	 SET_GLOBAL_FIELD(b, TLBRSW, TLBBFBS, v)
+
+
+/* TLBTR0 */
+#define SET_PR(b, v)		 SET_GLOBAL_FIELD(b, TLBTR0, PR, v)
+#define SET_PW(b, v)		 SET_GLOBAL_FIELD(b, TLBTR0, PW, v)
+#define SET_UR(b, v)		 SET_GLOBAL_FIELD(b, TLBTR0, UR, v)
+#define SET_UW(b, v)		 SET_GLOBAL_FIELD(b, TLBTR0, UW, v)
+#define SET_XN(b, v)		 SET_GLOBAL_FIELD(b, TLBTR0, XN, v)
+#define SET_NSDESC(b, v)	 SET_GLOBAL_FIELD(b, TLBTR0, NSDESC, v)
+#define SET_ISH(b, v)		 SET_GLOBAL_FIELD(b, TLBTR0, ISH, v)
+#define SET_SH(b, v)		 SET_GLOBAL_FIELD(b, TLBTR0, SH, v)
+#define SET_MT(b, v)		 SET_GLOBAL_FIELD(b, TLBTR0, MT, v)
+#define SET_DPSIZR(b, v)	 SET_GLOBAL_FIELD(b, TLBTR0, DPSIZR, v)
+#define SET_DPSIZC(b, v)	 SET_GLOBAL_FIELD(b, TLBTR0, DPSIZC, v)
+
+
+/* TLBTR1 */
+#define SET_TLBTR1_VMID(b, v)    SET_GLOBAL_FIELD(b, TLBTR1, TLBTR1_VMID, v)
+#define SET_TLBTR1_PA(b, v)      SET_GLOBAL_FIELD(b, TLBTR1, TLBTR1_PA, v)
+
+
+/* TLBTR2 */
+#define SET_TLBTR2_ASID(b, v)    SET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_ASID, v)
+#define SET_TLBTR2_V(b, v)       SET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_V, v)
+#define SET_TLBTR2_NSTID(b, v)   SET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_NSTID, v)
+#define SET_TLBTR2_NV(b, v)      SET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_NV, v)
+#define SET_TLBTR2_VA(b, v)      SET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_VA, v)
+
+
+/* Global Field Getters */
+/* CBACR_N */
+#define GET_RWVMID(b, n)	 GET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), RWVMID)
+#define GET_RWE(b, n)		 GET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), RWE)
+#define GET_RWGE(b, n)		 GET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), RWGE)
+#define GET_CBVMID(b, n)	 GET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), CBVMID)
+#define GET_IRPTNDX(b, n)	 GET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), IRPTNDX)
+
+
+/* M2VCBR_N */
+#define GET_VMID(b, n)       GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), VMID)
+#define GET_CBNDX(b, n)      GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), CBNDX)
+#define GET_BYPASSD(b, n)    GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BYPASSD)
+#define GET_BPRCOSH(b, n)    GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPRCOSH)
+#define GET_BPRCISH(b, n)    GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPRCISH)
+#define GET_BPRCNSH(b, n)    GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPRCNSH)
+#define GET_BPSHCFG(b, n)    GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPSHCFG)
+#define GET_NSCFG(b, n)      GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), NSCFG)
+#define GET_BPMTCFG(b, n)    GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPMTCFG)
+#define GET_BPMEMTYPE(b, n)  GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPMEMTYPE)
+
+
+/* CR */
+#define GET_RPUE(b)		 GET_GLOBAL_FIELD(b, CR, RPUE)
+#define GET_RPUERE(b)		 GET_GLOBAL_FIELD(b, CR, RPUERE)
+#define GET_RPUEIE(b)		 GET_GLOBAL_FIELD(b, CR, RPUEIE)
+#define GET_DCDEE(b)		 GET_GLOBAL_FIELD(b, CR, DCDEE)
+#define GET_CLIENTPD(b)		 GET_GLOBAL_FIELD(b, CR, CLIENTPD)
+#define GET_STALLD(b)		 GET_GLOBAL_FIELD(b, CR, STALLD)
+#define GET_TLBLKCRWE(b)	 GET_GLOBAL_FIELD(b, CR, TLBLKCRWE)
+#define GET_CR_TLBIALLCFG(b)	 GET_GLOBAL_FIELD(b, CR, CR_TLBIALLCFG)
+#define GET_TLBIVMIDCFG(b)	 GET_GLOBAL_FIELD(b, CR, TLBIVMIDCFG)
+#define GET_CR_HUME(b)		 GET_GLOBAL_FIELD(b, CR, CR_HUME)
+
+
+/* ESR */
+#define GET_CFG(b)		 GET_GLOBAL_FIELD(b, ESR, CFG)
+#define GET_BYPASS(b)		 GET_GLOBAL_FIELD(b, ESR, BYPASS)
+#define GET_ESR_MULTI(b)	 GET_GLOBAL_FIELD(b, ESR, ESR_MULTI)
+
+
+/* ESYNR0 */
+#define GET_ESYNR0_AMID(b)	 GET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_AMID)
+#define GET_ESYNR0_APID(b)	 GET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_APID)
+#define GET_ESYNR0_ABID(b)	 GET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_ABID)
+#define GET_ESYNR0_AVMID(b)	 GET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_AVMID)
+#define GET_ESYNR0_ATID(b)	 GET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_ATID)
+
+
+/* ESYNR1 */
+#define GET_ESYNR1_AMEMTYPE(b)   GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AMEMTYPE)
+#define GET_ESYNR1_ASHARED(b)    GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ASHARED)
+#define GET_ESYNR1_AINNERSHARED(b) \
+			GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AINNERSHARED)
+#define GET_ESYNR1_APRIV(b)      GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_APRIV)
+#define GET_ESYNR1_APROTNS(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_APROTNS)
+#define GET_ESYNR1_AINST(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AINST)
+#define GET_ESYNR1_AWRITE(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AWRITE)
+#define GET_ESYNR1_ABURST(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ABURST)
+#define GET_ESYNR1_ALEN(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ALEN)
+#define GET_ESYNR1_ASIZE(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ASIZE)
+#define GET_ESYNR1_ALOCK(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ALOCK)
+#define GET_ESYNR1_AOOO(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AOOO)
+#define GET_ESYNR1_AFULL(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AFULL)
+#define GET_ESYNR1_AC(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AC)
+#define GET_ESYNR1_DCD(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_DCD)
+
+
+/* IDR */
+#define GET_NM2VCBMT(b)		 GET_GLOBAL_FIELD(b, IDR, NM2VCBMT)
+#define GET_HTW(b)		 GET_GLOBAL_FIELD(b, IDR, HTW)
+#define GET_HUM(b)		 GET_GLOBAL_FIELD(b, IDR, HUM)
+#define GET_TLBSIZE(b)		 GET_GLOBAL_FIELD(b, IDR, TLBSIZE)
+#define GET_NCB(b)		 GET_GLOBAL_FIELD(b, IDR, NCB)
+#define GET_NIRPT(b)		 GET_GLOBAL_FIELD(b, IDR, NIRPT)
+
+
+/* REV */
+#define GET_MAJOR(b)		 GET_GLOBAL_FIELD(b, REV, MAJOR)
+#define GET_MINOR(b)		 GET_GLOBAL_FIELD(b, REV, MINOR)
+
+
+/* TESTBUSCR */
+#define GET_TBE(b)		 GET_GLOBAL_FIELD(b, TESTBUSCR, TBE)
+#define GET_SPDMBE(b)		 GET_GLOBAL_FIELD(b, TESTBUSCR, SPDMBE)
+#define GET_WGSEL(b)		 GET_GLOBAL_FIELD(b, TESTBUSCR, WGSEL)
+#define GET_TBLSEL(b)		 GET_GLOBAL_FIELD(b, TESTBUSCR, TBLSEL)
+#define GET_TBHSEL(b)		 GET_GLOBAL_FIELD(b, TESTBUSCR, TBHSEL)
+#define GET_SPDM0SEL(b)		 GET_GLOBAL_FIELD(b, TESTBUSCR, SPDM0SEL)
+#define GET_SPDM1SEL(b)		 GET_GLOBAL_FIELD(b, TESTBUSCR, SPDM1SEL)
+#define GET_SPDM2SEL(b)		 GET_GLOBAL_FIELD(b, TESTBUSCR, SPDM2SEL)
+#define GET_SPDM3SEL(b)		 GET_GLOBAL_FIELD(b, TESTBUSCR, SPDM3SEL)
+
+
+/* TLBIVMID */
+#define GET_TLBIVMID_VMID(b)	 GET_GLOBAL_FIELD(b, TLBIVMID, TLBIVMID_VMID)
+
+
+/* TLBTR0 */
+#define GET_PR(b)		 GET_GLOBAL_FIELD(b, TLBTR0, PR)
+#define GET_PW(b)		 GET_GLOBAL_FIELD(b, TLBTR0, PW)
+#define GET_UR(b)		 GET_GLOBAL_FIELD(b, TLBTR0, UR)
+#define GET_UW(b)		 GET_GLOBAL_FIELD(b, TLBTR0, UW)
+#define GET_XN(b)		 GET_GLOBAL_FIELD(b, TLBTR0, XN)
+#define GET_NSDESC(b)		 GET_GLOBAL_FIELD(b, TLBTR0, NSDESC)
+#define GET_ISH(b)		 GET_GLOBAL_FIELD(b, TLBTR0, ISH)
+#define GET_SH(b)		 GET_GLOBAL_FIELD(b, TLBTR0, SH)
+#define GET_MT(b)		 GET_GLOBAL_FIELD(b, TLBTR0, MT)
+#define GET_DPSIZR(b)		 GET_GLOBAL_FIELD(b, TLBTR0, DPSIZR)
+#define GET_DPSIZC(b)		 GET_GLOBAL_FIELD(b, TLBTR0, DPSIZC)
+
+
+/* TLBTR1 */
+#define GET_TLBTR1_VMID(b)	 GET_GLOBAL_FIELD(b, TLBTR1, TLBTR1_VMID)
+#define GET_TLBTR1_PA(b)	 GET_GLOBAL_FIELD(b, TLBTR1, TLBTR1_PA)
+
+
+/* TLBTR2 */
+#define GET_TLBTR2_ASID(b)	 GET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_ASID)
+#define GET_TLBTR2_V(b)		 GET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_V)
+#define GET_TLBTR2_NSTID(b)	 GET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_NSTID)
+#define GET_TLBTR2_NV(b)	 GET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_NV)
+#define GET_TLBTR2_VA(b)	 GET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_VA)
+
+
+/* Context Register setters / getters */
+/* Context Register setters */
+/* ACTLR */
+#define SET_CFERE(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, CFERE, v)
+#define SET_CFEIE(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, CFEIE, v)
+#define SET_PTSHCFG(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, PTSHCFG, v)
+#define SET_RCOSH(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, RCOSH, v)
+#define SET_RCISH(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, RCISH, v)
+#define SET_RCNSH(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, RCNSH, v)
+#define SET_PRIVCFG(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, PRIVCFG, v)
+#define SET_DNA(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, DNA, v)
+#define SET_DNLV2PA(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, DNLV2PA, v)
+#define SET_TLBMCFG(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, TLBMCFG, v)
+#define SET_CFCFG(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, CFCFG, v)
+#define SET_TIPCF(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, TIPCF, v)
+#define SET_V2PCFG(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, V2PCFG, v)
+#define SET_HUME(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, HUME, v)
+#define SET_PTMTCFG(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, PTMTCFG, v)
+#define SET_PTMEMTYPE(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, PTMEMTYPE, v)
+
+
+/* BFBCR */
+#define SET_BFBDFE(b, c, v)	 SET_CONTEXT_FIELD(b, c, BFBCR, BFBDFE, v)
+#define SET_BFBSFE(b, c, v)	 SET_CONTEXT_FIELD(b, c, BFBCR, BFBSFE, v)
+#define SET_SFVS(b, c, v)	 SET_CONTEXT_FIELD(b, c, BFBCR, SFVS, v)
+#define SET_FLVIC(b, c, v)	 SET_CONTEXT_FIELD(b, c, BFBCR, FLVIC, v)
+#define SET_SLVIC(b, c, v)	 SET_CONTEXT_FIELD(b, c, BFBCR, SLVIC, v)
+
+
+/* CONTEXTIDR */
+#define SET_CONTEXTIDR_ASID(b, c, v)   \
+		SET_CONTEXT_FIELD(b, c, CONTEXTIDR, CONTEXTIDR_ASID, v)
+#define SET_CONTEXTIDR_PROCID(b, c, v) \
+		SET_CONTEXT_FIELD(b, c, CONTEXTIDR, PROCID, v)
+
+
+/* FSR */
+#define SET_TF(b, c, v)		 SET_CONTEXT_FIELD(b, c, FSR, TF, v)
+#define SET_AFF(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSR, AFF, v)
+#define SET_APF(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSR, APF, v)
+#define SET_TLBMF(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSR, TLBMF, v)
+#define SET_HTWDEEF(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSR, HTWDEEF, v)
+#define SET_HTWSEEF(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSR, HTWSEEF, v)
+#define SET_MHF(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSR, MHF, v)
+#define SET_SL(b, c, v)		 SET_CONTEXT_FIELD(b, c, FSR, SL, v)
+#define SET_SS(b, c, v)		 SET_CONTEXT_FIELD(b, c, FSR, SS, v)
+#define SET_MULTI(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSR, MULTI, v)
+
+
+/* FSYNR0 */
+#define SET_AMID(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR0, AMID, v)
+#define SET_APID(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR0, APID, v)
+#define SET_ABID(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR0, ABID, v)
+#define SET_ATID(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR0, ATID, v)
+
+
+/* FSYNR1 */
+#define SET_AMEMTYPE(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR1, AMEMTYPE, v)
+#define SET_ASHARED(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR1, ASHARED, v)
+#define SET_AINNERSHARED(b, c, v)  \
+				SET_CONTEXT_FIELD(b, c, FSYNR1, AINNERSHARED, v)
+#define SET_APRIV(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR1, APRIV, v)
+#define SET_APROTNS(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR1, APROTNS, v)
+#define SET_AINST(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR1, AINST, v)
+#define SET_AWRITE(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR1, AWRITE, v)
+#define SET_ABURST(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR1, ABURST, v)
+#define SET_ALEN(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR1, ALEN, v)
+#define SET_FSYNR1_ASIZE(b, c, v) \
+				SET_CONTEXT_FIELD(b, c, FSYNR1, FSYNR1_ASIZE, v)
+#define SET_ALOCK(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR1, ALOCK, v)
+#define SET_AFULL(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR1, AFULL, v)
+
+
+/* NMRR */
+#define SET_ICPC0(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, ICPC0, v)
+#define SET_ICPC1(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, ICPC1, v)
+#define SET_ICPC2(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, ICPC2, v)
+#define SET_ICPC3(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, ICPC3, v)
+#define SET_ICPC4(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, ICPC4, v)
+#define SET_ICPC5(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, ICPC5, v)
+#define SET_ICPC6(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, ICPC6, v)
+#define SET_ICPC7(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, ICPC7, v)
+#define SET_OCPC0(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, OCPC0, v)
+#define SET_OCPC1(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, OCPC1, v)
+#define SET_OCPC2(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, OCPC2, v)
+#define SET_OCPC3(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, OCPC3, v)
+#define SET_OCPC4(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, OCPC4, v)
+#define SET_OCPC5(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, OCPC5, v)
+#define SET_OCPC6(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, OCPC6, v)
+#define SET_OCPC7(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, OCPC7, v)
+
+
+/* PAR */
+#define SET_FAULT(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, FAULT, v)
+
+#define SET_FAULT_TF(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, FAULT_TF, v)
+#define SET_FAULT_AFF(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, FAULT_AFF, v)
+#define SET_FAULT_APF(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, FAULT_APF, v)
+#define SET_FAULT_TLBMF(b, c, v) SET_CONTEXT_FIELD(b, c, PAR, FAULT_TLBMF, v)
+#define SET_FAULT_HTWDEEF(b, c, v) \
+				SET_CONTEXT_FIELD(b, c, PAR, FAULT_HTWDEEF, v)
+#define SET_FAULT_HTWSEEF(b, c, v) \
+				SET_CONTEXT_FIELD(b, c, PAR, FAULT_HTWSEEF, v)
+#define SET_FAULT_MHF(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, FAULT_MHF, v)
+#define SET_FAULT_SL(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, FAULT_SL, v)
+#define SET_FAULT_SS(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, FAULT_SS, v)
+
+#define SET_NOFAULT_SS(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, NOFAULT_SS, v)
+#define SET_NOFAULT_MT(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, NOFAULT_MT, v)
+#define SET_NOFAULT_SH(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, NOFAULT_SH, v)
+#define SET_NOFAULT_NS(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, NOFAULT_NS, v)
+#define SET_NOFAULT_NOS(b, c, v) SET_CONTEXT_FIELD(b, c, PAR, NOFAULT_NOS, v)
+#define SET_NPFAULT_PA(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, NPFAULT_PA, v)
+
+
+/* PRRR */
+#define SET_MTC0(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, MTC0, v)
+#define SET_MTC1(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, MTC1, v)
+#define SET_MTC2(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, MTC2, v)
+#define SET_MTC3(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, MTC3, v)
+#define SET_MTC4(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, MTC4, v)
+#define SET_MTC5(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, MTC5, v)
+#define SET_MTC6(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, MTC6, v)
+#define SET_MTC7(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, MTC7, v)
+#define SET_SHDSH0(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, SHDSH0, v)
+#define SET_SHDSH1(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, SHDSH1, v)
+#define SET_SHNMSH0(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, SHNMSH0, v)
+#define SET_SHNMSH1(b, c, v)     SET_CONTEXT_FIELD(b, c, PRRR, SHNMSH1, v)
+#define SET_NOS0(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, NOS0, v)
+#define SET_NOS1(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, NOS1, v)
+#define SET_NOS2(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, NOS2, v)
+#define SET_NOS3(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, NOS3, v)
+#define SET_NOS4(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, NOS4, v)
+#define SET_NOS5(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, NOS5, v)
+#define SET_NOS6(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, NOS6, v)
+#define SET_NOS7(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, NOS7, v)
+
+
+/* RESUME */
+#define SET_TNR(b, c, v)	 SET_CONTEXT_FIELD(b, c, RESUME, TNR, v)
+
+
+/* SCTLR */
+#define SET_M(b, c, v)		 SET_CONTEXT_FIELD(b, c, SCTLR, M, v)
+#define SET_TRE(b, c, v)	 SET_CONTEXT_FIELD(b, c, SCTLR, TRE, v)
+#define SET_AFE(b, c, v)	 SET_CONTEXT_FIELD(b, c, SCTLR, AFE, v)
+#define SET_HAF(b, c, v)	 SET_CONTEXT_FIELD(b, c, SCTLR, HAF, v)
+#define SET_BE(b, c, v)		 SET_CONTEXT_FIELD(b, c, SCTLR, BE, v)
+#define SET_AFFD(b, c, v)	 SET_CONTEXT_FIELD(b, c, SCTLR, AFFD, v)
+
+
+/* TLBLKCR */
+#define SET_LKE(b, c, v)	   SET_CONTEXT_FIELD(b, c, TLBLKCR, LKE, v)
+#define SET_TLBLKCR_TLBIALLCFG(b, c, v) \
+			SET_CONTEXT_FIELD(b, c, TLBLKCR, TLBLCKR_TLBIALLCFG, v)
+#define SET_TLBIASIDCFG(b, c, v) \
+			SET_CONTEXT_FIELD(b, c, TLBLKCR, TLBIASIDCFG, v)
+#define SET_TLBIVAACFG(b, c, v)	SET_CONTEXT_FIELD(b, c, TLBLKCR, TLBIVAACFG, v)
+#define SET_FLOOR(b, c, v)	SET_CONTEXT_FIELD(b, c, TLBLKCR, FLOOR, v)
+#define SET_VICTIM(b, c, v)	SET_CONTEXT_FIELD(b, c, TLBLKCR, VICTIM, v)
+
+
+/* TTBCR */
+#define SET_N(b, c, v)	         SET_CONTEXT_FIELD(b, c, TTBCR, N, v)
+#define SET_PD0(b, c, v)	 SET_CONTEXT_FIELD(b, c, TTBCR, PD0, v)
+#define SET_PD1(b, c, v)	 SET_CONTEXT_FIELD(b, c, TTBCR, PD1, v)
+
+
+/* TTBR0 */
+#define SET_TTBR0_IRGNH(b, c, v) SET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_IRGNH, v)
+#define SET_TTBR0_SH(b, c, v)	 SET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_SH, v)
+#define SET_TTBR0_ORGN(b, c, v)	 SET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_ORGN, v)
+#define SET_TTBR0_NOS(b, c, v)	 SET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_NOS, v)
+#define SET_TTBR0_IRGNL(b, c, v) SET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_IRGNL, v)
+#define SET_TTBR0_PA(b, c, v)	 SET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_PA, v)
+
+
+/* TTBR1 */
+#define SET_TTBR1_IRGNH(b, c, v) SET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_IRGNH, v)
+#define SET_TTBR1_SH(b, c, v)	 SET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_SH, v)
+#define SET_TTBR1_ORGN(b, c, v)	 SET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_ORGN, v)
+#define SET_TTBR1_NOS(b, c, v)	 SET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_NOS, v)
+#define SET_TTBR1_IRGNL(b, c, v) SET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_IRGNL, v)
+#define SET_TTBR1_PA(b, c, v)	 SET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_PA, v)
+
+
+/* V2PSR */
+#define SET_HIT(b, c, v)	 SET_CONTEXT_FIELD(b, c, V2PSR, HIT, v)
+#define SET_INDEX(b, c, v)	 SET_CONTEXT_FIELD(b, c, V2PSR, INDEX, v)
+
+
+/* V2Pxx UW UR PW PR */
+#define SET_V2PUW_INDEX(b, c, v) SET_CONTEXT_FIELD(b, c, V2PUW, V2Pxx_INDEX, v)
+#define SET_V2PUW_VA(b, c, v)	 SET_CONTEXT_FIELD(b, c, V2PUW, V2Pxx_VA, v)
+
+#define SET_V2PUR_INDEX(b, c, v) SET_CONTEXT_FIELD(b, c, V2PUR, V2Pxx_INDEX, v)
+#define SET_V2PUR_VA(b, c, v)	 SET_CONTEXT_FIELD(b, c, V2PUR, V2Pxx_VA, v)
+
+#define SET_V2PPW_INDEX(b, c, v) SET_CONTEXT_FIELD(b, c, V2PPW, V2Pxx_INDEX, v)
+#define SET_V2PPW_VA(b, c, v)	 SET_CONTEXT_FIELD(b, c, V2PPW, V2Pxx_VA, v)
+
+#define SET_V2PPR_INDEX(b, c, v) SET_CONTEXT_FIELD(b, c, V2PPR, V2Pxx_INDEX, v)
+#define SET_V2PPR_VA(b, c, v)	 SET_CONTEXT_FIELD(b, c, V2PPR, V2Pxx_VA, v)
+
+
+/* Context Register getters */
+/* ACTLR */
+#define GET_CFERE(b, c)	        GET_CONTEXT_FIELD(b, c, ACTLR, CFERE)
+#define GET_CFEIE(b, c)	        GET_CONTEXT_FIELD(b, c, ACTLR, CFEIE)
+#define GET_PTSHCFG(b, c)       GET_CONTEXT_FIELD(b, c, ACTLR, PTSHCFG)
+#define GET_RCOSH(b, c)	        GET_CONTEXT_FIELD(b, c, ACTLR, RCOSH)
+#define GET_RCISH(b, c)	        GET_CONTEXT_FIELD(b, c, ACTLR, RCISH)
+#define GET_RCNSH(b, c)	        GET_CONTEXT_FIELD(b, c, ACTLR, RCNSH)
+#define GET_PRIVCFG(b, c)       GET_CONTEXT_FIELD(b, c, ACTLR, PRIVCFG)
+#define GET_DNA(b, c)	        GET_CONTEXT_FIELD(b, c, ACTLR, DNA)
+#define GET_DNLV2PA(b, c)       GET_CONTEXT_FIELD(b, c, ACTLR, DNLV2PA)
+#define GET_TLBMCFG(b, c)       GET_CONTEXT_FIELD(b, c, ACTLR, TLBMCFG)
+#define GET_CFCFG(b, c)	        GET_CONTEXT_FIELD(b, c, ACTLR, CFCFG)
+#define GET_TIPCF(b, c)	        GET_CONTEXT_FIELD(b, c, ACTLR, TIPCF)
+#define GET_V2PCFG(b, c)        GET_CONTEXT_FIELD(b, c, ACTLR, V2PCFG)
+#define GET_HUME(b, c)	        GET_CONTEXT_FIELD(b, c, ACTLR, HUME)
+#define GET_PTMTCFG(b, c)       GET_CONTEXT_FIELD(b, c, ACTLR, PTMTCFG)
+#define GET_PTMEMTYPE(b, c)     GET_CONTEXT_FIELD(b, c, ACTLR, PTMEMTYPE)
+
+/* BFBCR */
+#define GET_BFBDFE(b, c)	GET_CONTEXT_FIELD(b, c, BFBCR, BFBDFE)
+#define GET_BFBSFE(b, c)	GET_CONTEXT_FIELD(b, c, BFBCR, BFBSFE)
+#define GET_SFVS(b, c)		GET_CONTEXT_FIELD(b, c, BFBCR, SFVS)
+#define GET_FLVIC(b, c)		GET_CONTEXT_FIELD(b, c, BFBCR, FLVIC)
+#define GET_SLVIC(b, c)		GET_CONTEXT_FIELD(b, c, BFBCR, SLVIC)
+
+
+/* CONTEXTIDR */
+#define GET_CONTEXTIDR_ASID(b, c) \
+			GET_CONTEXT_FIELD(b, c, CONTEXTIDR, CONTEXTIDR_ASID)
+#define GET_CONTEXTIDR_PROCID(b, c) GET_CONTEXT_FIELD(b, c, CONTEXTIDR, PROCID)
+
+
+/* FSR */
+#define GET_TF(b, c)		GET_CONTEXT_FIELD(b, c, FSR, TF)
+#define GET_AFF(b, c)		GET_CONTEXT_FIELD(b, c, FSR, AFF)
+#define GET_APF(b, c)		GET_CONTEXT_FIELD(b, c, FSR, APF)
+#define GET_TLBMF(b, c)		GET_CONTEXT_FIELD(b, c, FSR, TLBMF)
+#define GET_HTWDEEF(b, c)	GET_CONTEXT_FIELD(b, c, FSR, HTWDEEF)
+#define GET_HTWSEEF(b, c)	GET_CONTEXT_FIELD(b, c, FSR, HTWSEEF)
+#define GET_MHF(b, c)		GET_CONTEXT_FIELD(b, c, FSR, MHF)
+#define GET_SL(b, c)		GET_CONTEXT_FIELD(b, c, FSR, SL)
+#define GET_SS(b, c)		GET_CONTEXT_FIELD(b, c, FSR, SS)
+#define GET_MULTI(b, c)		GET_CONTEXT_FIELD(b, c, FSR, MULTI)
+
+
+/* FSYNR0 */
+#define GET_AMID(b, c)		GET_CONTEXT_FIELD(b, c, FSYNR0, AMID)
+#define GET_APID(b, c)		GET_CONTEXT_FIELD(b, c, FSYNR0, APID)
+#define GET_ABID(b, c)		GET_CONTEXT_FIELD(b, c, FSYNR0, ABID)
+#define GET_ATID(b, c)		GET_CONTEXT_FIELD(b, c, FSYNR0, ATID)
+
+
+/* FSYNR1 */
+#define GET_AMEMTYPE(b, c)	GET_CONTEXT_FIELD(b, c, FSYNR1, AMEMTYPE)
+#define GET_ASHARED(b, c)	GET_CONTEXT_FIELD(b, c, FSYNR1, ASHARED)
+#define GET_AINNERSHARED(b, c)  GET_CONTEXT_FIELD(b, c, FSYNR1, AINNERSHARED)
+#define GET_APRIV(b, c)		GET_CONTEXT_FIELD(b, c, FSYNR1, APRIV)
+#define GET_APROTNS(b, c)	GET_CONTEXT_FIELD(b, c, FSYNR1, APROTNS)
+#define GET_AINST(b, c)		GET_CONTEXT_FIELD(b, c, FSYNR1, AINST)
+#define GET_AWRITE(b, c)	GET_CONTEXT_FIELD(b, c, FSYNR1, AWRITE)
+#define GET_ABURST(b, c)	GET_CONTEXT_FIELD(b, c, FSYNR1, ABURST)
+#define GET_ALEN(b, c)		GET_CONTEXT_FIELD(b, c, FSYNR1, ALEN)
+#define GET_FSYNR1_ASIZE(b, c)	GET_CONTEXT_FIELD(b, c, FSYNR1, FSYNR1_ASIZE)
+#define GET_ALOCK(b, c)		GET_CONTEXT_FIELD(b, c, FSYNR1, ALOCK)
+#define GET_AFULL(b, c)		GET_CONTEXT_FIELD(b, c, FSYNR1, AFULL)
+
+
+/* NMRR */
+#define GET_ICPC0(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, ICPC0)
+#define GET_ICPC1(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, ICPC1)
+#define GET_ICPC2(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, ICPC2)
+#define GET_ICPC3(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, ICPC3)
+#define GET_ICPC4(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, ICPC4)
+#define GET_ICPC5(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, ICPC5)
+#define GET_ICPC6(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, ICPC6)
+#define GET_ICPC7(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, ICPC7)
+#define GET_OCPC0(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, OCPC0)
+#define GET_OCPC1(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, OCPC1)
+#define GET_OCPC2(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, OCPC2)
+#define GET_OCPC3(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, OCPC3)
+#define GET_OCPC4(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, OCPC4)
+#define GET_OCPC5(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, OCPC5)
+#define GET_OCPC6(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, OCPC6)
+#define GET_OCPC7(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, OCPC7)
+
+
+/* PAR */
+#define GET_FAULT(b, c)		GET_CONTEXT_FIELD(b, c, PAR, FAULT)
+
+#define GET_FAULT_TF(b, c)	GET_CONTEXT_FIELD(b, c, PAR, FAULT_TF)
+#define GET_FAULT_AFF(b, c)	GET_CONTEXT_FIELD(b, c, PAR, FAULT_AFF)
+#define GET_FAULT_APF(b, c)	GET_CONTEXT_FIELD(b, c, PAR, FAULT_APF)
+#define GET_FAULT_TLBMF(b, c)   GET_CONTEXT_FIELD(b, c, PAR, FAULT_TLBMF)
+#define GET_FAULT_HTWDEEF(b, c) GET_CONTEXT_FIELD(b, c, PAR, FAULT_HTWDEEF)
+#define GET_FAULT_HTWSEEF(b, c) GET_CONTEXT_FIELD(b, c, PAR, FAULT_HTWSEEF)
+#define GET_FAULT_MHF(b, c)	GET_CONTEXT_FIELD(b, c, PAR, FAULT_MHF)
+#define GET_FAULT_SL(b, c)	GET_CONTEXT_FIELD(b, c, PAR, FAULT_SL)
+#define GET_FAULT_SS(b, c)	GET_CONTEXT_FIELD(b, c, PAR, FAULT_SS)
+
+#define GET_NOFAULT_SS(b, c)	GET_CONTEXT_FIELD(b, c, PAR, PAR_NOFAULT_SS)
+#define GET_NOFAULT_MT(b, c)	GET_CONTEXT_FIELD(b, c, PAR, PAR_NOFAULT_MT)
+#define GET_NOFAULT_SH(b, c)	GET_CONTEXT_FIELD(b, c, PAR, PAR_NOFAULT_SH)
+#define GET_NOFAULT_NS(b, c)	GET_CONTEXT_FIELD(b, c, PAR, PAR_NOFAULT_NS)
+#define GET_NOFAULT_NOS(b, c)   GET_CONTEXT_FIELD(b, c, PAR, PAR_NOFAULT_NOS)
+#define GET_NPFAULT_PA(b, c)	GET_CONTEXT_FIELD(b, c, PAR, PAR_NPFAULT_PA)
+
+
+/* PRRR */
+#define GET_MTC0(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, MTC0)
+#define GET_MTC1(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, MTC1)
+#define GET_MTC2(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, MTC2)
+#define GET_MTC3(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, MTC3)
+#define GET_MTC4(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, MTC4)
+#define GET_MTC5(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, MTC5)
+#define GET_MTC6(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, MTC6)
+#define GET_MTC7(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, MTC7)
+#define GET_SHDSH0(b, c)	GET_CONTEXT_FIELD(b, c, PRRR, SHDSH0)
+#define GET_SHDSH1(b, c)	GET_CONTEXT_FIELD(b, c, PRRR, SHDSH1)
+#define GET_SHNMSH0(b, c)	GET_CONTEXT_FIELD(b, c, PRRR, SHNMSH0)
+#define GET_SHNMSH1(b, c)	GET_CONTEXT_FIELD(b, c, PRRR, SHNMSH1)
+#define GET_NOS0(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, NOS0)
+#define GET_NOS1(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, NOS1)
+#define GET_NOS2(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, NOS2)
+#define GET_NOS3(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, NOS3)
+#define GET_NOS4(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, NOS4)
+#define GET_NOS5(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, NOS5)
+#define GET_NOS6(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, NOS6)
+#define GET_NOS7(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, NOS7)
+
+
+/* RESUME */
+#define GET_TNR(b, c)		GET_CONTEXT_FIELD(b, c, RESUME, TNR)
+
+
+/* SCTLR */
+#define GET_M(b, c)		GET_CONTEXT_FIELD(b, c, SCTLR, M)
+#define GET_TRE(b, c)		GET_CONTEXT_FIELD(b, c, SCTLR, TRE)
+#define GET_AFE(b, c)		GET_CONTEXT_FIELD(b, c, SCTLR, AFE)
+#define GET_HAF(b, c)		GET_CONTEXT_FIELD(b, c, SCTLR, HAF)
+#define GET_BE(b, c)		GET_CONTEXT_FIELD(b, c, SCTLR, BE)
+#define GET_AFFD(b, c)		GET_CONTEXT_FIELD(b, c, SCTLR, AFFD)
+
+
+/* TLBLKCR */
+#define GET_LKE(b, c)		GET_CONTEXT_FIELD(b, c, TLBLKCR, LKE)
+#define GET_TLBLCKR_TLBIALLCFG(b, c) \
+			GET_CONTEXT_FIELD(b, c, TLBLKCR, TLBLCKR_TLBIALLCFG)
+#define GET_TLBIASIDCFG(b, c)   GET_CONTEXT_FIELD(b, c, TLBLKCR, TLBIASIDCFG)
+#define GET_TLBIVAACFG(b, c)	GET_CONTEXT_FIELD(b, c, TLBLKCR, TLBIVAACFG)
+#define GET_FLOOR(b, c)		GET_CONTEXT_FIELD(b, c, TLBLKCR, FLOOR)
+#define GET_VICTIM(b, c)	GET_CONTEXT_FIELD(b, c, TLBLKCR, VICTIM)
+
+
+/* TTBCR */
+#define GET_N(b, c)		GET_CONTEXT_FIELD(b, c, TTBCR, N)
+#define GET_PD0(b, c)		GET_CONTEXT_FIELD(b, c, TTBCR, PD0)
+#define GET_PD1(b, c)		GET_CONTEXT_FIELD(b, c, TTBCR, PD1)
+
+
+/* TTBR0 */
+#define GET_TTBR0_IRGNH(b, c)	GET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_IRGNH)
+#define GET_TTBR0_SH(b, c)	GET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_SH)
+#define GET_TTBR0_ORGN(b, c)	GET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_ORGN)
+#define GET_TTBR0_NOS(b, c)	GET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_NOS)
+#define GET_TTBR0_IRGNL(b, c)	GET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_IRGNL)
+#define GET_TTBR0_PA(b, c)	GET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_PA)
+
+
+/* TTBR1 */
+#define GET_TTBR1_IRGNH(b, c)	GET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_IRGNH)
+#define GET_TTBR1_SH(b, c)	GET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_SH)
+#define GET_TTBR1_ORGN(b, c)	GET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_ORGN)
+#define GET_TTBR1_NOS(b, c)	GET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_NOS)
+#define GET_TTBR1_IRGNL(b, c)	GET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_IRGNL)
+#define GET_TTBR1_PA(b, c)	GET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_PA)
+
+
+/* V2PSR */
+#define GET_HIT(b, c)		GET_CONTEXT_FIELD(b, c, V2PSR, HIT)
+#define GET_INDEX(b, c)		GET_CONTEXT_FIELD(b, c, V2PSR, INDEX)
+
+
+/* V2Pxx UW UR PW PR */
+#define GET_V2PUW_INDEX(b, c)	GET_CONTEXT_FIELD(b, c, V2PUW, V2Pxx_INDEX)
+#define GET_V2PUW_VA(b, c)	GET_CONTEXT_FIELD(b, c, V2PUW, V2Pxx_VA)
+
+#define GET_V2PUR_INDEX(b, c)	GET_CONTEXT_FIELD(b, c, V2PUR, V2Pxx_INDEX)
+#define GET_V2PUR_VA(b, c)	GET_CONTEXT_FIELD(b, c, V2PUR, V2Pxx_VA)
+
+#define GET_V2PPW_INDEX(b, c)	GET_CONTEXT_FIELD(b, c, V2PPW, V2Pxx_INDEX)
+#define GET_V2PPW_VA(b, c)	GET_CONTEXT_FIELD(b, c, V2PPW, V2Pxx_VA)
+
+#define GET_V2PPR_INDEX(b, c)	GET_CONTEXT_FIELD(b, c, V2PPR, V2Pxx_INDEX)
+#define GET_V2PPR_VA(b, c)	GET_CONTEXT_FIELD(b, c, V2PPR, V2Pxx_VA)
+
+
+/* Global Registers */
+#define M2VCBR_N	(0xFF000)
+#define CBACR_N		(0xFF800)
+#define TLBRSW		(0xFFE00)
+#define TLBTR0		(0xFFE80)
+#define TLBTR1		(0xFFE84)
+#define TLBTR2		(0xFFE88)
+#define TESTBUSCR	(0xFFE8C)
+#define GLOBAL_TLBIALL	(0xFFF00)
+#define TLBIVMID	(0xFFF04)
+#define CR		(0xFFF80)
+#define EAR		(0xFFF84)
+#define ESR		(0xFFF88)
+#define ESRRESTORE	(0xFFF8C)
+#define ESYNR0		(0xFFF90)
+#define ESYNR1		(0xFFF94)
+#define REV		(0xFFFF4)
+#define IDR		(0xFFFF8)
+#define RPU_ACR		(0xFFFFC)
+
+
+/* Context Bank Registers */
+#define SCTLR		(0x000)
+#define ACTLR		(0x004)
+#define CONTEXTIDR	(0x008)
+#define TTBR0		(0x010)
+#define TTBR1		(0x014)
+#define TTBCR		(0x018)
+#define PAR		(0x01C)
+#define FSR		(0x020)
+#define FSRRESTORE	(0x024)
+#define FAR		(0x028)
+#define FSYNR0		(0x02C)
+#define FSYNR1		(0x030)
+#define PRRR		(0x034)
+#define NMRR		(0x038)
+#define TLBLCKR		(0x03C)
+#define V2PSR		(0x040)
+#define TLBFLPTER	(0x044)
+#define TLBSLPTER	(0x048)
+#define BFBCR		(0x04C)
+#define CTX_TLBIALL	(0x800)
+#define TLBIASID	(0x804)
+#define TLBIVA		(0x808)
+#define TLBIVAA		(0x80C)
+#define V2PPR		(0x810)
+#define V2PPW		(0x814)
+#define V2PUR		(0x818)
+#define V2PUW		(0x81C)
+#define RESUME		(0x820)
+
+
+/* Global Register Fields */
+/* CBACRn */
+#define RWVMID        (RWVMID_MASK       << RWVMID_SHIFT)
+#define RWE           (RWE_MASK          << RWE_SHIFT)
+#define RWGE          (RWGE_MASK         << RWGE_SHIFT)
+#define CBVMID        (CBVMID_MASK       << CBVMID_SHIFT)
+#define IRPTNDX       (IRPTNDX_MASK      << IRPTNDX_SHIFT)
+
+
+/* CR */
+#define RPUE          (RPUE_MASK          << RPUE_SHIFT)
+#define RPUERE        (RPUERE_MASK        << RPUERE_SHIFT)
+#define RPUEIE        (RPUEIE_MASK        << RPUEIE_SHIFT)
+#define DCDEE         (DCDEE_MASK         << DCDEE_SHIFT)
+#define CLIENTPD      (CLIENTPD_MASK      << CLIENTPD_SHIFT)
+#define STALLD        (STALLD_MASK        << STALLD_SHIFT)
+#define TLBLKCRWE     (TLBLKCRWE_MASK     << TLBLKCRWE_SHIFT)
+#define CR_TLBIALLCFG (CR_TLBIALLCFG_MASK << CR_TLBIALLCFG_SHIFT)
+#define TLBIVMIDCFG   (TLBIVMIDCFG_MASK   << TLBIVMIDCFG_SHIFT)
+#define CR_HUME       (CR_HUME_MASK       << CR_HUME_SHIFT)
+
+
+/* ESR */
+#define CFG           (CFG_MASK          << CFG_SHIFT)
+#define BYPASS        (BYPASS_MASK       << BYPASS_SHIFT)
+#define ESR_MULTI     (ESR_MULTI_MASK    << ESR_MULTI_SHIFT)
+
+
+/* ESYNR0 */
+#define ESYNR0_AMID   (ESYNR0_AMID_MASK  << ESYNR0_AMID_SHIFT)
+#define ESYNR0_APID   (ESYNR0_APID_MASK  << ESYNR0_APID_SHIFT)
+#define ESYNR0_ABID   (ESYNR0_ABID_MASK  << ESYNR0_ABID_SHIFT)
+#define ESYNR0_AVMID  (ESYNR0_AVMID_MASK << ESYNR0_AVMID_SHIFT)
+#define ESYNR0_ATID   (ESYNR0_ATID_MASK  << ESYNR0_ATID_SHIFT)
+
+
+/* ESYNR1 */
+#define ESYNR1_AMEMTYPE      (ESYNR1_AMEMTYPE_MASK    << ESYNR1_AMEMTYPE_SHIFT)
+#define ESYNR1_ASHARED       (ESYNR1_ASHARED_MASK     << ESYNR1_ASHARED_SHIFT)
+#define ESYNR1_AINNERSHARED  (ESYNR1_AINNERSHARED_MASK<< \
+						ESYNR1_AINNERSHARED_SHIFT)
+#define ESYNR1_APRIV         (ESYNR1_APRIV_MASK       << ESYNR1_APRIV_SHIFT)
+#define ESYNR1_APROTNS       (ESYNR1_APROTNS_MASK     << ESYNR1_APROTNS_SHIFT)
+#define ESYNR1_AINST         (ESYNR1_AINST_MASK       << ESYNR1_AINST_SHIFT)
+#define ESYNR1_AWRITE        (ESYNR1_AWRITE_MASK      << ESYNR1_AWRITE_SHIFT)
+#define ESYNR1_ABURST        (ESYNR1_ABURST_MASK      << ESYNR1_ABURST_SHIFT)
+#define ESYNR1_ALEN          (ESYNR1_ALEN_MASK        << ESYNR1_ALEN_SHIFT)
+#define ESYNR1_ASIZE         (ESYNR1_ASIZE_MASK       << ESYNR1_ASIZE_SHIFT)
+#define ESYNR1_ALOCK         (ESYNR1_ALOCK_MASK       << ESYNR1_ALOCK_SHIFT)
+#define ESYNR1_AOOO          (ESYNR1_AOOO_MASK        << ESYNR1_AOOO_SHIFT)
+#define ESYNR1_AFULL         (ESYNR1_AFULL_MASK       << ESYNR1_AFULL_SHIFT)
+#define ESYNR1_AC            (ESYNR1_AC_MASK          << ESYNR1_AC_SHIFT)
+#define ESYNR1_DCD           (ESYNR1_DCD_MASK         << ESYNR1_DCD_SHIFT)
+
+
+/* IDR */
+#define NM2VCBMT      (NM2VCBMT_MASK     << NM2VCBMT_SHIFT)
+#define HTW           (HTW_MASK          << HTW_SHIFT)
+#define HUM           (HUM_MASK          << HUM_SHIFT)
+#define TLBSIZE       (TLBSIZE_MASK      << TLBSIZE_SHIFT)
+#define NCB           (NCB_MASK          << NCB_SHIFT)
+#define NIRPT         (NIRPT_MASK        << NIRPT_SHIFT)
+
+
+/* M2VCBRn */
+#define VMID          (VMID_MASK         << VMID_SHIFT)
+#define CBNDX         (CBNDX_MASK        << CBNDX_SHIFT)
+#define BYPASSD       (BYPASSD_MASK      << BYPASSD_SHIFT)
+#define BPRCOSH       (BPRCOSH_MASK      << BPRCOSH_SHIFT)
+#define BPRCISH       (BPRCISH_MASK      << BPRCISH_SHIFT)
+#define BPRCNSH       (BPRCNSH_MASK      << BPRCNSH_SHIFT)
+#define BPSHCFG       (BPSHCFG_MASK      << BPSHCFG_SHIFT)
+#define NSCFG         (NSCFG_MASK        << NSCFG_SHIFT)
+#define BPMTCFG       (BPMTCFG_MASK      << BPMTCFG_SHIFT)
+#define BPMEMTYPE     (BPMEMTYPE_MASK    << BPMEMTYPE_SHIFT)
+
+
+/* REV */
+#define IDR_MINOR     (MINOR_MASK        << MINOR_SHIFT)
+#define IDR_MAJOR     (MAJOR_MASK        << MAJOR_SHIFT)
+
+
+/* TESTBUSCR */
+#define TBE           (TBE_MASK          << TBE_SHIFT)
+#define SPDMBE        (SPDMBE_MASK       << SPDMBE_SHIFT)
+#define WGSEL         (WGSEL_MASK        << WGSEL_SHIFT)
+#define TBLSEL        (TBLSEL_MASK       << TBLSEL_SHIFT)
+#define TBHSEL        (TBHSEL_MASK       << TBHSEL_SHIFT)
+#define SPDM0SEL      (SPDM0SEL_MASK     << SPDM0SEL_SHIFT)
+#define SPDM1SEL      (SPDM1SEL_MASK     << SPDM1SEL_SHIFT)
+#define SPDM2SEL      (SPDM2SEL_MASK     << SPDM2SEL_SHIFT)
+#define SPDM3SEL      (SPDM3SEL_MASK     << SPDM3SEL_SHIFT)
+
+
+/* TLBIVMID */
+#define TLBIVMID_VMID (TLBIVMID_VMID_MASK << TLBIVMID_VMID_SHIFT)
+
+
+/* TLBRSW */
+#define TLBRSW_INDEX  (TLBRSW_INDEX_MASK << TLBRSW_INDEX_SHIFT)
+#define TLBBFBS       (TLBBFBS_MASK      << TLBBFBS_SHIFT)
+
+
+/* TLBTR0 */
+#define PR            (PR_MASK           << PR_SHIFT)
+#define PW            (PW_MASK           << PW_SHIFT)
+#define UR            (UR_MASK           << UR_SHIFT)
+#define UW            (UW_MASK           << UW_SHIFT)
+#define XN            (XN_MASK           << XN_SHIFT)
+#define NSDESC        (NSDESC_MASK       << NSDESC_SHIFT)
+#define ISH           (ISH_MASK          << ISH_SHIFT)
+#define SH            (SH_MASK           << SH_SHIFT)
+#define MT            (MT_MASK           << MT_SHIFT)
+#define DPSIZR        (DPSIZR_MASK       << DPSIZR_SHIFT)
+#define DPSIZC        (DPSIZC_MASK       << DPSIZC_SHIFT)
+
+
+/* TLBTR1 */
+#define TLBTR1_VMID   (TLBTR1_VMID_MASK  << TLBTR1_VMID_SHIFT)
+#define TLBTR1_PA     (TLBTR1_PA_MASK    << TLBTR1_PA_SHIFT)
+
+
+/* TLBTR2 */
+#define TLBTR2_ASID   (TLBTR2_ASID_MASK  << TLBTR2_ASID_SHIFT)
+#define TLBTR2_V      (TLBTR2_V_MASK     << TLBTR2_V_SHIFT)
+#define TLBTR2_NSTID  (TLBTR2_NSTID_MASK << TLBTR2_NSTID_SHIFT)
+#define TLBTR2_NV     (TLBTR2_NV_MASK    << TLBTR2_NV_SHIFT)
+#define TLBTR2_VA     (TLBTR2_VA_MASK    << TLBTR2_VA_SHIFT)
+
+
+/* Context Register Fields */
+/* ACTLR */
+#define CFERE              (CFERE_MASK              << CFERE_SHIFT)
+#define CFEIE              (CFEIE_MASK              << CFEIE_SHIFT)
+#define PTSHCFG            (PTSHCFG_MASK            << PTSHCFG_SHIFT)
+#define RCOSH              (RCOSH_MASK              << RCOSH_SHIFT)
+#define RCISH              (RCISH_MASK              << RCISH_SHIFT)
+#define RCNSH              (RCNSH_MASK              << RCNSH_SHIFT)
+#define PRIVCFG            (PRIVCFG_MASK            << PRIVCFG_SHIFT)
+#define DNA                (DNA_MASK                << DNA_SHIFT)
+#define DNLV2PA            (DNLV2PA_MASK            << DNLV2PA_SHIFT)
+#define TLBMCFG            (TLBMCFG_MASK            << TLBMCFG_SHIFT)
+#define CFCFG              (CFCFG_MASK              << CFCFG_SHIFT)
+#define TIPCF              (TIPCF_MASK              << TIPCF_SHIFT)
+#define V2PCFG             (V2PCFG_MASK             << V2PCFG_SHIFT)
+#define HUME               (HUME_MASK               << HUME_SHIFT)
+#define PTMTCFG            (PTMTCFG_MASK            << PTMTCFG_SHIFT)
+#define PTMEMTYPE          (PTMEMTYPE_MASK          << PTMEMTYPE_SHIFT)
+
+
+/* BFBCR */
+#define BFBDFE             (BFBDFE_MASK             << BFBDFE_SHIFT)
+#define BFBSFE             (BFBSFE_MASK             << BFBSFE_SHIFT)
+#define SFVS               (SFVS_MASK               << SFVS_SHIFT)
+#define FLVIC              (FLVIC_MASK              << FLVIC_SHIFT)
+#define SLVIC              (SLVIC_MASK              << SLVIC_SHIFT)
+
+
+/* CONTEXTIDR */
+#define CONTEXTIDR_ASID    (CONTEXTIDR_ASID_MASK    << CONTEXTIDR_ASID_SHIFT)
+#define PROCID             (PROCID_MASK             << PROCID_SHIFT)
+
+
+/* FSR */
+#define TF                 (TF_MASK                 << TF_SHIFT)
+#define AFF                (AFF_MASK                << AFF_SHIFT)
+#define APF                (APF_MASK                << APF_SHIFT)
+#define TLBMF              (TLBMF_MASK              << TLBMF_SHIFT)
+#define HTWDEEF            (HTWDEEF_MASK            << HTWDEEF_SHIFT)
+#define HTWSEEF            (HTWSEEF_MASK            << HTWSEEF_SHIFT)
+#define MHF                (MHF_MASK                << MHF_SHIFT)
+#define SL                 (SL_MASK                 << SL_SHIFT)
+#define SS                 (SS_MASK                 << SS_SHIFT)
+#define MULTI              (MULTI_MASK              << MULTI_SHIFT)
+
+
+/* FSYNR0 */
+#define AMID               (AMID_MASK               << AMID_SHIFT)
+#define APID               (APID_MASK               << APID_SHIFT)
+#define ABID               (ABID_MASK               << ABID_SHIFT)
+#define ATID               (ATID_MASK               << ATID_SHIFT)
+
+
+/* FSYNR1 */
+#define AMEMTYPE           (AMEMTYPE_MASK           << AMEMTYPE_SHIFT)
+#define ASHARED            (ASHARED_MASK            << ASHARED_SHIFT)
+#define AINNERSHARED       (AINNERSHARED_MASK       << AINNERSHARED_SHIFT)
+#define APRIV              (APRIV_MASK              << APRIV_SHIFT)
+#define APROTNS            (APROTNS_MASK            << APROTNS_SHIFT)
+#define AINST              (AINST_MASK              << AINST_SHIFT)
+#define AWRITE             (AWRITE_MASK             << AWRITE_SHIFT)
+#define ABURST             (ABURST_MASK             << ABURST_SHIFT)
+#define ALEN               (ALEN_MASK               << ALEN_SHIFT)
+#define FSYNR1_ASIZE       (FSYNR1_ASIZE_MASK       << FSYNR1_ASIZE_SHIFT)
+#define ALOCK              (ALOCK_MASK              << ALOCK_SHIFT)
+#define AFULL              (AFULL_MASK              << AFULL_SHIFT)
+
+
+/* NMRR */
+#define ICPC0              (ICPC0_MASK              << ICPC0_SHIFT)
+#define ICPC1              (ICPC1_MASK              << ICPC1_SHIFT)
+#define ICPC2              (ICPC2_MASK              << ICPC2_SHIFT)
+#define ICPC3              (ICPC3_MASK              << ICPC3_SHIFT)
+#define ICPC4              (ICPC4_MASK              << ICPC4_SHIFT)
+#define ICPC5              (ICPC5_MASK              << ICPC5_SHIFT)
+#define ICPC6              (ICPC6_MASK              << ICPC6_SHIFT)
+#define ICPC7              (ICPC7_MASK              << ICPC7_SHIFT)
+#define OCPC0              (OCPC0_MASK              << OCPC0_SHIFT)
+#define OCPC1              (OCPC1_MASK              << OCPC1_SHIFT)
+#define OCPC2              (OCPC2_MASK              << OCPC2_SHIFT)
+#define OCPC3              (OCPC3_MASK              << OCPC3_SHIFT)
+#define OCPC4              (OCPC4_MASK              << OCPC4_SHIFT)
+#define OCPC5              (OCPC5_MASK              << OCPC5_SHIFT)
+#define OCPC6              (OCPC6_MASK              << OCPC6_SHIFT)
+#define OCPC7              (OCPC7_MASK              << OCPC7_SHIFT)
+
+
+/* PAR */
+#define FAULT              (FAULT_MASK              << FAULT_SHIFT)
+/* If a fault is present, these are the
+same as the fault fields in the FAR */
+#define FAULT_TF           (FAULT_TF_MASK           << FAULT_TF_SHIFT)
+#define FAULT_AFF          (FAULT_AFF_MASK          << FAULT_AFF_SHIFT)
+#define FAULT_APF          (FAULT_APF_MASK          << FAULT_APF_SHIFT)
+#define FAULT_TLBMF        (FAULT_TLBMF_MASK        << FAULT_TLBMF_SHIFT)
+#define FAULT_HTWDEEF      (FAULT_HTWDEEF_MASK      << FAULT_HTWDEEF_SHIFT)
+#define FAULT_HTWSEEF      (FAULT_HTWSEEF_MASK      << FAULT_HTWSEEF_SHIFT)
+#define FAULT_MHF          (FAULT_MHF_MASK          << FAULT_MHF_SHIFT)
+#define FAULT_SL           (FAULT_SL_MASK           << FAULT_SL_SHIFT)
+#define FAULT_SS           (FAULT_SS_MASK           << FAULT_SS_SHIFT)
+
+/* If NO fault is present, the following fields are in effect */
+/* (FAULT remains as before) */
+#define PAR_NOFAULT_SS     (PAR_NOFAULT_SS_MASK     << PAR_NOFAULT_SS_SHIFT)
+#define PAR_NOFAULT_MT     (PAR_NOFAULT_MT_MASK     << PAR_NOFAULT_MT_SHIFT)
+#define PAR_NOFAULT_SH     (PAR_NOFAULT_SH_MASK     << PAR_NOFAULT_SH_SHIFT)
+#define PAR_NOFAULT_NS     (PAR_NOFAULT_NS_MASK     << PAR_NOFAULT_NS_SHIFT)
+#define PAR_NOFAULT_NOS    (PAR_NOFAULT_NOS_MASK    << PAR_NOFAULT_NOS_SHIFT)
+#define PAR_NPFAULT_PA     (PAR_NPFAULT_PA_MASK     << PAR_NPFAULT_PA_SHIFT)
+
+
+/* PRRR */
+#define MTC0               (MTC0_MASK               << MTC0_SHIFT)
+#define MTC1               (MTC1_MASK               << MTC1_SHIFT)
+#define MTC2               (MTC2_MASK               << MTC2_SHIFT)
+#define MTC3               (MTC3_MASK               << MTC3_SHIFT)
+#define MTC4               (MTC4_MASK               << MTC4_SHIFT)
+#define MTC5               (MTC5_MASK               << MTC5_SHIFT)
+#define MTC6               (MTC6_MASK               << MTC6_SHIFT)
+#define MTC7               (MTC7_MASK               << MTC7_SHIFT)
+#define SHDSH0             (SHDSH0_MASK             << SHDSH0_SHIFT)
+#define SHDSH1             (SHDSH1_MASK             << SHDSH1_SHIFT)
+#define SHNMSH0            (SHNMSH0_MASK            << SHNMSH0_SHIFT)
+#define SHNMSH1            (SHNMSH1_MASK            << SHNMSH1_SHIFT)
+#define NOS0               (NOS0_MASK               << NOS0_SHIFT)
+#define NOS1               (NOS1_MASK               << NOS1_SHIFT)
+#define NOS2               (NOS2_MASK               << NOS2_SHIFT)
+#define NOS3               (NOS3_MASK               << NOS3_SHIFT)
+#define NOS4               (NOS4_MASK               << NOS4_SHIFT)
+#define NOS5               (NOS5_MASK               << NOS5_SHIFT)
+#define NOS6               (NOS6_MASK               << NOS6_SHIFT)
+#define NOS7               (NOS7_MASK               << NOS7_SHIFT)
+
+
+/* RESUME */
+#define TNR                (TNR_MASK                << TNR_SHIFT)
+
+
+/* SCTLR */
+#define M                  (M_MASK                  << M_SHIFT)
+#define TRE                (TRE_MASK                << TRE_SHIFT)
+#define AFE                (AFE_MASK                << AFE_SHIFT)
+#define HAF                (HAF_MASK                << HAF_SHIFT)
+#define BE                 (BE_MASK                 << BE_SHIFT)
+#define AFFD               (AFFD_MASK               << AFFD_SHIFT)
+
+
+/* TLBIASID */
+#define TLBIASID_ASID      (TLBIASID_ASID_MASK      << TLBIASID_ASID_SHIFT)
+
+
+/* TLBIVA */
+#define TLBIVA_ASID        (TLBIVA_ASID_MASK        << TLBIVA_ASID_SHIFT)
+#define TLBIVA_VA          (TLBIVA_VA_MASK          << TLBIVA_VA_SHIFT)
+
+
+/* TLBIVAA */
+#define TLBIVAA_VA         (TLBIVAA_VA_MASK         << TLBIVAA_VA_SHIFT)
+
+
+/* TLBLCKR */
+#define LKE                (LKE_MASK                << LKE_SHIFT)
+#define TLBLCKR_TLBIALLCFG (TLBLCKR_TLBIALLCFG_MASK<<TLBLCKR_TLBIALLCFG_SHIFT)
+#define TLBIASIDCFG        (TLBIASIDCFG_MASK        << TLBIASIDCFG_SHIFT)
+#define TLBIVAACFG         (TLBIVAACFG_MASK         << TLBIVAACFG_SHIFT)
+#define FLOOR              (FLOOR_MASK              << FLOOR_SHIFT)
+#define VICTIM             (VICTIM_MASK             << VICTIM_SHIFT)
+
+
+/* TTBCR */
+#define N                  (N_MASK                  << N_SHIFT)
+#define PD0                (PD0_MASK                << PD0_SHIFT)
+#define PD1                (PD1_MASK                << PD1_SHIFT)
+
+
+/* TTBR0 */
+#define TTBR0_IRGNH        (TTBR0_IRGNH_MASK        << TTBR0_IRGNH_SHIFT)
+#define TTBR0_SH           (TTBR0_SH_MASK           << TTBR0_SH_SHIFT)
+#define TTBR0_ORGN         (TTBR0_ORGN_MASK         << TTBR0_ORGN_SHIFT)
+#define TTBR0_NOS          (TTBR0_NOS_MASK          << TTBR0_NOS_SHIFT)
+#define TTBR0_IRGNL        (TTBR0_IRGNL_MASK        << TTBR0_IRGNL_SHIFT)
+#define TTBR0_PA           (TTBR0_PA_MASK           << TTBR0_PA_SHIFT)
+
+
+/* TTBR1 */
+#define TTBR1_IRGNH        (TTBR1_IRGNH_MASK        << TTBR1_IRGNH_SHIFT)
+#define TTBR1_SH           (TTBR1_SH_MASK           << TTBR1_SH_SHIFT)
+#define TTBR1_ORGN         (TTBR1_ORGN_MASK         << TTBR1_ORGN_SHIFT)
+#define TTBR1_NOS          (TTBR1_NOS_MASK          << TTBR1_NOS_SHIFT)
+#define TTBR1_IRGNL        (TTBR1_IRGNL_MASK        << TTBR1_IRGNL_SHIFT)
+#define TTBR1_PA           (TTBR1_PA_MASK           << TTBR1_PA_SHIFT)
+
+
+/* V2PSR */
+#define HIT                (HIT_MASK                << HIT_SHIFT)
+#define INDEX              (INDEX_MASK              << INDEX_SHIFT)
+
+
+/* V2Pxx */
+#define V2Pxx_INDEX        (V2Pxx_INDEX_MASK        << V2Pxx_INDEX_SHIFT)
+#define V2Pxx_VA           (V2Pxx_VA_MASK           << V2Pxx_VA_SHIFT)
+
+
+/* Global Register Masks */
+/* CBACRn */
+#define RWVMID_MASK               0x1F
+#define RWE_MASK                  0x01
+#define RWGE_MASK                 0x01
+#define CBVMID_MASK               0x1F
+#define IRPTNDX_MASK              0xFF
+
+
+/* CR */
+#define RPUE_MASK                 0x01
+#define RPUERE_MASK               0x01
+#define RPUEIE_MASK               0x01
+#define DCDEE_MASK                0x01
+#define CLIENTPD_MASK             0x01
+#define STALLD_MASK               0x01
+#define TLBLKCRWE_MASK            0x01
+#define CR_TLBIALLCFG_MASK        0x01
+#define TLBIVMIDCFG_MASK          0x01
+#define CR_HUME_MASK              0x01
+
+
+/* ESR */
+#define CFG_MASK                  0x01
+#define BYPASS_MASK               0x01
+#define ESR_MULTI_MASK            0x01
+
+
+/* ESYNR0 */
+#define ESYNR0_AMID_MASK          0xFF
+#define ESYNR0_APID_MASK          0x1F
+#define ESYNR0_ABID_MASK          0x07
+#define ESYNR0_AVMID_MASK         0x1F
+#define ESYNR0_ATID_MASK          0xFF
+
+
+/* ESYNR1 */
+#define ESYNR1_AMEMTYPE_MASK             0x07
+#define ESYNR1_ASHARED_MASK              0x01
+#define ESYNR1_AINNERSHARED_MASK         0x01
+#define ESYNR1_APRIV_MASK                0x01
+#define ESYNR1_APROTNS_MASK              0x01
+#define ESYNR1_AINST_MASK                0x01
+#define ESYNR1_AWRITE_MASK               0x01
+#define ESYNR1_ABURST_MASK               0x01
+#define ESYNR1_ALEN_MASK                 0x0F
+#define ESYNR1_ASIZE_MASK                0x01
+#define ESYNR1_ALOCK_MASK                0x03
+#define ESYNR1_AOOO_MASK                 0x01
+#define ESYNR1_AFULL_MASK                0x01
+#define ESYNR1_AC_MASK                   0x01
+#define ESYNR1_DCD_MASK                  0x01
+
+
+/* IDR */
+#define NM2VCBMT_MASK             0x1FF
+#define HTW_MASK                  0x01
+#define HUM_MASK                  0x01
+#define TLBSIZE_MASK              0x0F
+#define NCB_MASK                  0xFF
+#define NIRPT_MASK                0xFF
+
+
+/* M2VCBRn */
+#define VMID_MASK                 0x1F
+#define CBNDX_MASK                0xFF
+#define BYPASSD_MASK              0x01
+#define BPRCOSH_MASK              0x01
+#define BPRCISH_MASK              0x01
+#define BPRCNSH_MASK              0x01
+#define BPSHCFG_MASK              0x03
+#define NSCFG_MASK                0x03
+#define BPMTCFG_MASK              0x01
+#define BPMEMTYPE_MASK            0x07
+
+
+/* REV */
+#define MINOR_MASK                0x0F
+#define MAJOR_MASK                0x0F
+
+
+/* TESTBUSCR */
+#define TBE_MASK                  0x01
+#define SPDMBE_MASK               0x01
+#define WGSEL_MASK                0x03
+#define TBLSEL_MASK               0x03
+#define TBHSEL_MASK               0x03
+#define SPDM0SEL_MASK             0x0F
+#define SPDM1SEL_MASK             0x0F
+#define SPDM2SEL_MASK             0x0F
+#define SPDM3SEL_MASK             0x0F
+
+
+/* TLBIMID */
+#define TLBIVMID_VMID_MASK        0x1F
+
+
+/* TLBRSW */
+#define TLBRSW_INDEX_MASK         0xFF
+#define TLBBFBS_MASK              0x03
+
+
+/* TLBTR0 */
+#define PR_MASK                   0x01
+#define PW_MASK                   0x01
+#define UR_MASK                   0x01
+#define UW_MASK                   0x01
+#define XN_MASK                   0x01
+#define NSDESC_MASK               0x01
+#define ISH_MASK                  0x01
+#define SH_MASK                   0x01
+#define MT_MASK                   0x07
+#define DPSIZR_MASK               0x07
+#define DPSIZC_MASK               0x07
+
+
+/* TLBTR1 */
+#define TLBTR1_VMID_MASK          0x1F
+#define TLBTR1_PA_MASK            0x000FFFFF
+
+
+/* TLBTR2 */
+#define TLBTR2_ASID_MASK          0xFF
+#define TLBTR2_V_MASK             0x01
+#define TLBTR2_NSTID_MASK         0x01
+#define TLBTR2_NV_MASK            0x01
+#define TLBTR2_VA_MASK            0x000FFFFF
+
+
+/* Global Register Shifts */
+/* CBACRn */
+#define RWVMID_SHIFT             0
+#define RWE_SHIFT                8
+#define RWGE_SHIFT               9
+#define CBVMID_SHIFT             16
+#define IRPTNDX_SHIFT            24
+
+
+/* CR */
+#define RPUE_SHIFT               0
+#define RPUERE_SHIFT             1
+#define RPUEIE_SHIFT             2
+#define DCDEE_SHIFT              3
+#define CLIENTPD_SHIFT           4
+#define STALLD_SHIFT             5
+#define TLBLKCRWE_SHIFT          6
+#define CR_TLBIALLCFG_SHIFT      7
+#define TLBIVMIDCFG_SHIFT        8
+#define CR_HUME_SHIFT            9
+
+
+/* ESR */
+#define CFG_SHIFT                0
+#define BYPASS_SHIFT             1
+#define ESR_MULTI_SHIFT          31
+
+
+/* ESYNR0 */
+#define ESYNR0_AMID_SHIFT        0
+#define ESYNR0_APID_SHIFT        8
+#define ESYNR0_ABID_SHIFT        13
+#define ESYNR0_AVMID_SHIFT       16
+#define ESYNR0_ATID_SHIFT        24
+
+
+/* ESYNR1 */
+#define ESYNR1_AMEMTYPE_SHIFT           0
+#define ESYNR1_ASHARED_SHIFT            3
+#define ESYNR1_AINNERSHARED_SHIFT       4
+#define ESYNR1_APRIV_SHIFT              5
+#define ESYNR1_APROTNS_SHIFT            6
+#define ESYNR1_AINST_SHIFT              7
+#define ESYNR1_AWRITE_SHIFT             8
+#define ESYNR1_ABURST_SHIFT             10
+#define ESYNR1_ALEN_SHIFT               12
+#define ESYNR1_ASIZE_SHIFT              16
+#define ESYNR1_ALOCK_SHIFT              20
+#define ESYNR1_AOOO_SHIFT               22
+#define ESYNR1_AFULL_SHIFT              24
+#define ESYNR1_AC_SHIFT                 30
+#define ESYNR1_DCD_SHIFT                31
+
+
+/* IDR */
+#define NM2VCBMT_SHIFT           0
+#define HTW_SHIFT                9
+#define HUM_SHIFT                10
+#define TLBSIZE_SHIFT            12
+#define NCB_SHIFT                16
+#define NIRPT_SHIFT              24
+
+
+/* M2VCBRn */
+#define VMID_SHIFT               0
+#define CBNDX_SHIFT              8
+#define BYPASSD_SHIFT            16
+#define BPRCOSH_SHIFT            17
+#define BPRCISH_SHIFT            18
+#define BPRCNSH_SHIFT            19
+#define BPSHCFG_SHIFT            20
+#define NSCFG_SHIFT              22
+#define BPMTCFG_SHIFT            24
+#define BPMEMTYPE_SHIFT          25
+
+
+/* REV */
+#define MINOR_SHIFT              0
+#define MAJOR_SHIFT              4
+
+
+/* TESTBUSCR */
+#define TBE_SHIFT                0
+#define SPDMBE_SHIFT             1
+#define WGSEL_SHIFT              8
+#define TBLSEL_SHIFT             12
+#define TBHSEL_SHIFT             14
+#define SPDM0SEL_SHIFT           16
+#define SPDM1SEL_SHIFT           20
+#define SPDM2SEL_SHIFT           24
+#define SPDM3SEL_SHIFT           28
+
+
+/* TLBIMID */
+#define TLBIVMID_VMID_SHIFT      0
+
+
+/* TLBRSW */
+#define TLBRSW_INDEX_SHIFT       0
+#define TLBBFBS_SHIFT            8
+
+
+/* TLBTR0 */
+#define PR_SHIFT                 0
+#define PW_SHIFT                 1
+#define UR_SHIFT                 2
+#define UW_SHIFT                 3
+#define XN_SHIFT                 4
+#define NSDESC_SHIFT             6
+#define ISH_SHIFT                7
+#define SH_SHIFT                 8
+#define MT_SHIFT                 9
+#define DPSIZR_SHIFT             16
+#define DPSIZC_SHIFT             20
+
+
+/* TLBTR1 */
+#define TLBTR1_VMID_SHIFT        0
+#define TLBTR1_PA_SHIFT          12
+
+
+/* TLBTR2 */
+#define TLBTR2_ASID_SHIFT        0
+#define TLBTR2_V_SHIFT           8
+#define TLBTR2_NSTID_SHIFT       9
+#define TLBTR2_NV_SHIFT          10
+#define TLBTR2_VA_SHIFT          12
+
+
+/* Context Register Masks */
+/* ACTLR */
+#define CFERE_MASK                       0x01
+#define CFEIE_MASK                       0x01
+#define PTSHCFG_MASK                     0x03
+#define RCOSH_MASK                       0x01
+#define RCISH_MASK                       0x01
+#define RCNSH_MASK                       0x01
+#define PRIVCFG_MASK                     0x03
+#define DNA_MASK                         0x01
+#define DNLV2PA_MASK                     0x01
+#define TLBMCFG_MASK                     0x03
+#define CFCFG_MASK                       0x01
+#define TIPCF_MASK                       0x01
+#define V2PCFG_MASK                      0x03
+#define HUME_MASK                        0x01
+#define PTMTCFG_MASK                     0x01
+#define PTMEMTYPE_MASK                   0x07
+
+
+/* BFBCR */
+#define BFBDFE_MASK                      0x01
+#define BFBSFE_MASK                      0x01
+#define SFVS_MASK                        0x01
+#define FLVIC_MASK                       0x0F
+#define SLVIC_MASK                       0x0F
+
+
+/* CONTEXTIDR */
+#define CONTEXTIDR_ASID_MASK             0xFF
+#define PROCID_MASK                      0x00FFFFFF
+
+
+/* FSR */
+#define TF_MASK                          0x01
+#define AFF_MASK                         0x01
+#define APF_MASK                         0x01
+#define TLBMF_MASK                       0x01
+#define HTWDEEF_MASK                     0x01
+#define HTWSEEF_MASK                     0x01
+#define MHF_MASK                         0x01
+#define SL_MASK                          0x01
+#define SS_MASK                          0x01
+#define MULTI_MASK                       0x01
+
+
+/* FSYNR0 */
+#define AMID_MASK                        0xFF
+#define APID_MASK                        0x1F
+#define ABID_MASK                        0x07
+#define ATID_MASK                        0xFF
+
+
+/* FSYNR1 */
+#define AMEMTYPE_MASK                    0x07
+#define ASHARED_MASK                     0x01
+#define AINNERSHARED_MASK                0x01
+#define APRIV_MASK                       0x01
+#define APROTNS_MASK                     0x01
+#define AINST_MASK                       0x01
+#define AWRITE_MASK                      0x01
+#define ABURST_MASK                      0x01
+#define ALEN_MASK                        0x0F
+#define FSYNR1_ASIZE_MASK                0x07
+#define ALOCK_MASK                       0x03
+#define AFULL_MASK                       0x01
+
+
+/* NMRR */
+#define ICPC0_MASK                       0x03
+#define ICPC1_MASK                       0x03
+#define ICPC2_MASK                       0x03
+#define ICPC3_MASK                       0x03
+#define ICPC4_MASK                       0x03
+#define ICPC5_MASK                       0x03
+#define ICPC6_MASK                       0x03
+#define ICPC7_MASK                       0x03
+#define OCPC0_MASK                       0x03
+#define OCPC1_MASK                       0x03
+#define OCPC2_MASK                       0x03
+#define OCPC3_MASK                       0x03
+#define OCPC4_MASK                       0x03
+#define OCPC5_MASK                       0x03
+#define OCPC6_MASK                       0x03
+#define OCPC7_MASK                       0x03
+
+
+/* PAR */
+#define FAULT_MASK                       0x01
+/* If a fault is present, these are the
+same as the fault fields in the FAR */
+#define FAULT_TF_MASK                    0x01
+#define FAULT_AFF_MASK                   0x01
+#define FAULT_APF_MASK                   0x01
+#define FAULT_TLBMF_MASK                 0x01
+#define FAULT_HTWDEEF_MASK               0x01
+#define FAULT_HTWSEEF_MASK               0x01
+#define FAULT_MHF_MASK                   0x01
+#define FAULT_SL_MASK                    0x01
+#define FAULT_SS_MASK                    0x01
+
+/* If NO fault is present, the following
+ * fields are in effect
+ * (FAULT remains as before) */
+#define PAR_NOFAULT_SS_MASK              0x01
+#define PAR_NOFAULT_MT_MASK              0x07
+#define PAR_NOFAULT_SH_MASK              0x01
+#define PAR_NOFAULT_NS_MASK              0x01
+#define PAR_NOFAULT_NOS_MASK             0x01
+#define PAR_NPFAULT_PA_MASK              0x000FFFFF
+
+
+/* PRRR */
+#define MTC0_MASK                        0x03
+#define MTC1_MASK                        0x03
+#define MTC2_MASK                        0x03
+#define MTC3_MASK                        0x03
+#define MTC4_MASK                        0x03
+#define MTC5_MASK                        0x03
+#define MTC6_MASK                        0x03
+#define MTC7_MASK                        0x03
+#define SHDSH0_MASK                      0x01
+#define SHDSH1_MASK                      0x01
+#define SHNMSH0_MASK                     0x01
+#define SHNMSH1_MASK                     0x01
+#define NOS0_MASK                        0x01
+#define NOS1_MASK                        0x01
+#define NOS2_MASK                        0x01
+#define NOS3_MASK                        0x01
+#define NOS4_MASK                        0x01
+#define NOS5_MASK                        0x01
+#define NOS6_MASK                        0x01
+#define NOS7_MASK                        0x01
+
+
+/* RESUME */
+#define TNR_MASK                         0x01
+
+
+/* SCTLR */
+#define M_MASK                           0x01
+#define TRE_MASK                         0x01
+#define AFE_MASK                         0x01
+#define HAF_MASK                         0x01
+#define BE_MASK                          0x01
+#define AFFD_MASK                        0x01
+
+
+/* TLBIASID */
+#define TLBIASID_ASID_MASK               0xFF
+
+
+/* TLBIVA */
+#define TLBIVA_ASID_MASK                 0xFF
+#define TLBIVA_VA_MASK                   0x000FFFFF
+
+
+/* TLBIVAA */
+#define TLBIVAA_VA_MASK                  0x000FFFFF
+
+
+/* TLBLCKR */
+#define LKE_MASK                         0x01
+#define TLBLCKR_TLBIALLCFG_MASK          0x01
+#define TLBIASIDCFG_MASK                 0x01
+#define TLBIVAACFG_MASK                  0x01
+#define FLOOR_MASK                       0xFF
+#define VICTIM_MASK                      0xFF
+
+
+/* TTBCR */
+#define N_MASK                           0x07
+#define PD0_MASK                         0x01
+#define PD1_MASK                         0x01
+
+
+/* TTBR0 */
+#define TTBR0_IRGNH_MASK                 0x01
+#define TTBR0_SH_MASK                    0x01
+#define TTBR0_ORGN_MASK                  0x03
+#define TTBR0_NOS_MASK                   0x01
+#define TTBR0_IRGNL_MASK                 0x01
+#define TTBR0_PA_MASK                    0x0003FFFF
+
+
+/* TTBR1 */
+#define TTBR1_IRGNH_MASK                 0x01
+#define TTBR1_SH_MASK                    0x01
+#define TTBR1_ORGN_MASK                  0x03
+#define TTBR1_NOS_MASK                   0x01
+#define TTBR1_IRGNL_MASK                 0x01
+#define TTBR1_PA_MASK                    0x0003FFFF
+
+
+/* V2PSR */
+#define HIT_MASK                         0x01
+#define INDEX_MASK                       0xFF
+
+
+/* V2Pxx */
+#define V2Pxx_INDEX_MASK                 0xFF
+#define V2Pxx_VA_MASK                    0x000FFFFF
+
+
+/* Context Register Shifts */
+/* ACTLR */
+#define CFERE_SHIFT                    0
+#define CFEIE_SHIFT                    1
+#define PTSHCFG_SHIFT                  2
+#define RCOSH_SHIFT                    4
+#define RCISH_SHIFT                    5
+#define RCNSH_SHIFT                    6
+#define PRIVCFG_SHIFT                  8
+#define DNA_SHIFT                      10
+#define DNLV2PA_SHIFT                  11
+#define TLBMCFG_SHIFT                  12
+#define CFCFG_SHIFT                    14
+#define TIPCF_SHIFT                    15
+#define V2PCFG_SHIFT                   16
+#define HUME_SHIFT                     18
+#define PTMTCFG_SHIFT                  20
+#define PTMEMTYPE_SHIFT                21
+
+
+/* BFBCR */
+#define BFBDFE_SHIFT                   0
+#define BFBSFE_SHIFT                   1
+#define SFVS_SHIFT                     2
+#define FLVIC_SHIFT                    4
+#define SLVIC_SHIFT                    8
+
+
+/* CONTEXTIDR */
+#define CONTEXTIDR_ASID_SHIFT          0
+#define PROCID_SHIFT                   8
+
+
+/* FSR */
+#define TF_SHIFT                       1
+#define AFF_SHIFT                      2
+#define APF_SHIFT                      3
+#define TLBMF_SHIFT                    4
+#define HTWDEEF_SHIFT                  5
+#define HTWSEEF_SHIFT                  6
+#define MHF_SHIFT                      7
+#define SL_SHIFT                       16
+#define SS_SHIFT                       30
+#define MULTI_SHIFT                    31
+
+
+/* FSYNR0 */
+#define AMID_SHIFT                     0
+#define APID_SHIFT                     8
+#define ABID_SHIFT                     13
+#define ATID_SHIFT                     24
+
+
+/* FSYNR1 */
+#define AMEMTYPE_SHIFT                 0
+#define ASHARED_SHIFT                  3
+#define AINNERSHARED_SHIFT             4
+#define APRIV_SHIFT                    5
+#define APROTNS_SHIFT                  6
+#define AINST_SHIFT                    7
+#define AWRITE_SHIFT                   8
+#define ABURST_SHIFT                   10
+#define ALEN_SHIFT                     12
+#define FSYNR1_ASIZE_SHIFT             16
+#define ALOCK_SHIFT                    20
+#define AFULL_SHIFT                    24
+
+
+/* NMRR */
+#define ICPC0_SHIFT                    0
+#define ICPC1_SHIFT                    2
+#define ICPC2_SHIFT                    4
+#define ICPC3_SHIFT                    6
+#define ICPC4_SHIFT                    8
+#define ICPC5_SHIFT                    10
+#define ICPC6_SHIFT                    12
+#define ICPC7_SHIFT                    14
+#define OCPC0_SHIFT                    16
+#define OCPC1_SHIFT                    18
+#define OCPC2_SHIFT                    20
+#define OCPC3_SHIFT                    22
+#define OCPC4_SHIFT                    24
+#define OCPC5_SHIFT                    26
+#define OCPC6_SHIFT                    28
+#define OCPC7_SHIFT                    30
+
+
+/* PAR */
+#define FAULT_SHIFT                    0
+/* If a fault is present, these are the
+same as the fault fields in the FAR */
+#define FAULT_TF_SHIFT                 1
+#define FAULT_AFF_SHIFT                2
+#define FAULT_APF_SHIFT                3
+#define FAULT_TLBMF_SHIFT              4
+#define FAULT_HTWDEEF_SHIFT            5
+#define FAULT_HTWSEEF_SHIFT            6
+#define FAULT_MHF_SHIFT                7
+#define FAULT_SL_SHIFT                 16
+#define FAULT_SS_SHIFT                 30
+
+/* If NO fault is present, the following
+ * fields are in effect
+ * (FAULT remains as before) */
+#define PAR_NOFAULT_SS_SHIFT           1
+#define PAR_NOFAULT_MT_SHIFT           4
+#define PAR_NOFAULT_SH_SHIFT           7
+#define PAR_NOFAULT_NS_SHIFT           9
+#define PAR_NOFAULT_NOS_SHIFT          10
+#define PAR_NPFAULT_PA_SHIFT           12
+
+
+/* PRRR */
+#define MTC0_SHIFT                     0
+#define MTC1_SHIFT                     2
+#define MTC2_SHIFT                     4
+#define MTC3_SHIFT                     6
+#define MTC4_SHIFT                     8
+#define MTC5_SHIFT                     10
+#define MTC6_SHIFT                     12
+#define MTC7_SHIFT                     14
+#define SHDSH0_SHIFT                   16
+#define SHDSH1_SHIFT                   17
+#define SHNMSH0_SHIFT                  18
+#define SHNMSH1_SHIFT                  19
+#define NOS0_SHIFT                     24
+#define NOS1_SHIFT                     25
+#define NOS2_SHIFT                     26
+#define NOS3_SHIFT                     27
+#define NOS4_SHIFT                     28
+#define NOS5_SHIFT                     29
+#define NOS6_SHIFT                     30
+#define NOS7_SHIFT                     31
+
+
+/* RESUME */
+#define TNR_SHIFT                      0
+
+
+/* SCTLR */
+#define M_SHIFT                        0
+#define TRE_SHIFT                      1
+#define AFE_SHIFT                      2
+#define HAF_SHIFT                      3
+#define BE_SHIFT                       4
+#define AFFD_SHIFT                     5
+
+
+/* TLBIASID */
+#define TLBIASID_ASID_SHIFT            0
+
+
+/* TLBIVA */
+#define TLBIVA_ASID_SHIFT              0
+#define TLBIVA_VA_SHIFT                12
+
+
+/* TLBIVAA */
+#define TLBIVAA_VA_SHIFT               12
+
+
+/* TLBLCKR */
+#define LKE_SHIFT                      0
+#define TLBLCKR_TLBIALLCFG_SHIFT       1
+#define TLBIASIDCFG_SHIFT              2
+#define TLBIVAACFG_SHIFT               3
+#define FLOOR_SHIFT                    8
+#define VICTIM_SHIFT                   8
+
+
+/* TTBCR */
+#define N_SHIFT                        3
+#define PD0_SHIFT                      4
+#define PD1_SHIFT                      5
+
+
+/* TTBR0 */
+#define TTBR0_IRGNH_SHIFT              0
+#define TTBR0_SH_SHIFT                 1
+#define TTBR0_ORGN_SHIFT               3
+#define TTBR0_NOS_SHIFT                5
+#define TTBR0_IRGNL_SHIFT              6
+#define TTBR0_PA_SHIFT                 14
+
+
+/* TTBR1 */
+#define TTBR1_IRGNH_SHIFT              0
+#define TTBR1_SH_SHIFT                 1
+#define TTBR1_ORGN_SHIFT               3
+#define TTBR1_NOS_SHIFT                5
+#define TTBR1_IRGNL_SHIFT              6
+#define TTBR1_PA_SHIFT                 14
+
+
+/* V2PSR */
+#define HIT_SHIFT                      0
+#define INDEX_SHIFT                    8
+
+
+/* V2Pxx */
+#define V2Pxx_INDEX_SHIFT              0
+#define V2Pxx_VA_SHIFT                 12
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/irqs-8x60.h b/arch/arm/mach-msm/include/mach/irqs-8x60.h
new file mode 100644
index 00000000000..36074cfc9ad
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/irqs-8x60.h
@@ -0,0 +1,253 @@
+/* Copyright (c) 2010 Code Aurora Forum. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_IRQS_8X60_H
+#define __ASM_ARCH_MSM_IRQS_8X60_H
+
+/* MSM ACPU Interrupt Numbers */
+
+/* 0-15:  STI/SGI (software triggered/generated interrupts)
+ * 16-31: PPI (private peripheral interrupts)
+ * 32+:   SPI (shared peripheral interrupts)
+ */
+
+#define GIC_PPI_START 16
+#define GIC_SPI_START 32
+
+#define INT_DEBUG_TIMER_EXP			(GIC_PPI_START + 0)
+#define INT_GP_TIMER_EXP			(GIC_PPI_START + 1)
+#define INT_GP_TIMER2_EXP			(GIC_PPI_START + 2)
+#define WDT0_ACCSCSSNBARK_INT			(GIC_PPI_START + 3)
+#define WDT1_ACCSCSSNBARK_INT			(GIC_PPI_START + 4)
+#define AVS_SVICINT				(GIC_PPI_START + 5)
+#define AVS_SVICINTSWDONE			(GIC_PPI_START + 6)
+#define CPU_DBGCPUXCOMMRXFULL			(GIC_PPI_START + 7)
+#define CPU_DBGCPUXCOMMTXEMPTY			(GIC_PPI_START + 8)
+#define CPU_SICCPUXPERFMONIRPTREQ		(GIC_PPI_START + 9)
+#define SC_AVSCPUXDOWN				(GIC_PPI_START + 10)
+#define SC_AVSCPUXUP				(GIC_PPI_START + 11)
+#define SC_SICCPUXACGIRPTREQ			(GIC_PPI_START + 12)
+/* PPI 13 to 15 are unused */
+
+
+#define SC_SICMPUIRPTREQ			(GIC_SPI_START + 0)
+#define SC_SICL2IRPTREQ				(GIC_SPI_START + 1)
+#define SC_SICL2ACGIRPTREQ			(GIC_SPI_START + 2)
+#define NC					(GIC_SPI_START + 3)
+#define TLMM_SCSS_DIR_CONN_IRQ_0		(GIC_SPI_START + 4)
+#define TLMM_SCSS_DIR_CONN_IRQ_1		(GIC_SPI_START + 5)
+#define TLMM_SCSS_DIR_CONN_IRQ_2		(GIC_SPI_START + 6)
+#define TLMM_SCSS_DIR_CONN_IRQ_3		(GIC_SPI_START + 7)
+#define TLMM_SCSS_DIR_CONN_IRQ_4		(GIC_SPI_START + 8)
+#define TLMM_SCSS_DIR_CONN_IRQ_5		(GIC_SPI_START + 9)
+#define TLMM_SCSS_DIR_CONN_IRQ_6		(GIC_SPI_START + 10)
+#define TLMM_SCSS_DIR_CONN_IRQ_7		(GIC_SPI_START + 11)
+#define TLMM_SCSS_DIR_CONN_IRQ_8		(GIC_SPI_START + 12)
+#define TLMM_SCSS_DIR_CONN_IRQ_9		(GIC_SPI_START + 13)
+#define PM8058_SEC_IRQ_N			(GIC_SPI_START + 14)
+#define PM8901_SEC_IRQ_N			(GIC_SPI_START + 15)
+#define TLMM_SCSS_SUMMARY_IRQ			(GIC_SPI_START + 16)
+#define SPDM_RT_1_IRQ				(GIC_SPI_START + 17)
+#define SPDM_DIAG_IRQ				(GIC_SPI_START + 18)
+#define RPM_SCSS_CPU0_GP_HIGH_IRQ		(GIC_SPI_START + 19)
+#define RPM_SCSS_CPU0_GP_MEDIUM_IRQ		(GIC_SPI_START + 20)
+#define RPM_SCSS_CPU0_GP_LOW_IRQ		(GIC_SPI_START + 21)
+#define RPM_SCSS_CPU0_WAKE_UP_IRQ		(GIC_SPI_START + 22)
+#define RPM_SCSS_CPU1_GP_HIGH_IRQ		(GIC_SPI_START + 23)
+#define RPM_SCSS_CPU1_GP_MEDIUM_IRQ		(GIC_SPI_START + 24)
+#define RPM_SCSS_CPU1_GP_LOW_IRQ		(GIC_SPI_START + 25)
+#define RPM_SCSS_CPU1_WAKE_UP_IRQ		(GIC_SPI_START + 26)
+#define SSBI2_2_SC_CPU0_SECURE_INT		(GIC_SPI_START + 27)
+#define SSBI2_2_SC_CPU0_NON_SECURE_INT		(GIC_SPI_START + 28)
+#define SSBI2_1_SC_CPU0_SECURE_INT		(GIC_SPI_START + 29)
+#define SSBI2_1_SC_CPU0_NON_SECURE_INT		(GIC_SPI_START + 30)
+#define MSMC_SC_SEC_CE_IRQ			(GIC_SPI_START + 31)
+#define MSMC_SC_PRI_CE_IRQ			(GIC_SPI_START + 32)
+#define MARM_FIQ				(GIC_SPI_START + 33)
+#define MARM_IRQ				(GIC_SPI_START + 34)
+#define MARM_L2CC_IRQ				(GIC_SPI_START + 35)
+#define MARM_WDOG_EXPIRED			(GIC_SPI_START + 36)
+#define MARM_SCSS_GP_IRQ_0			(GIC_SPI_START + 37)
+#define MARM_SCSS_GP_IRQ_1			(GIC_SPI_START + 38)
+#define MARM_SCSS_GP_IRQ_2			(GIC_SPI_START + 39)
+#define MARM_SCSS_GP_IRQ_3			(GIC_SPI_START + 40)
+#define MARM_SCSS_GP_IRQ_4			(GIC_SPI_START + 41)
+#define MARM_SCSS_GP_IRQ_5			(GIC_SPI_START + 42)
+#define MARM_SCSS_GP_IRQ_6			(GIC_SPI_START + 43)
+#define MARM_SCSS_GP_IRQ_7			(GIC_SPI_START + 44)
+#define MARM_SCSS_GP_IRQ_8			(GIC_SPI_START + 45)
+#define MARM_SCSS_GP_IRQ_9			(GIC_SPI_START + 46)
+#define VPE_IRQ					(GIC_SPI_START + 47)
+#define VFE_IRQ					(GIC_SPI_START + 48)
+#define VCODEC_IRQ				(GIC_SPI_START + 49)
+#define TV_ENC_IRQ				(GIC_SPI_START + 50)
+#define SMMU_VPE_CB_SC_SECURE_IRQ		(GIC_SPI_START + 51)
+#define SMMU_VPE_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 52)
+#define SMMU_VFE_CB_SC_SECURE_IRQ		(GIC_SPI_START + 53)
+#define SMMU_VFE_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 54)
+#define SMMU_VCODEC_B_CB_SC_SECURE_IRQ		(GIC_SPI_START + 55)
+#define SMMU_VCODEC_B_CB_SC_NON_SECURE_IRQ	(GIC_SPI_START + 56)
+#define SMMU_VCODEC_A_CB_SC_SECURE_IRQ		(GIC_SPI_START + 57)
+#define SMMU_VCODEC_A_CB_SC_NON_SECURE_IRQ	(GIC_SPI_START + 58)
+#define SMMU_ROT_CB_SC_SECURE_IRQ		(GIC_SPI_START + 59)
+#define SMMU_ROT_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 60)
+#define SMMU_MDP1_CB_SC_SECURE_IRQ		(GIC_SPI_START + 61)
+#define SMMU_MDP1_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 62)
+#define SMMU_MDP0_CB_SC_SECURE_IRQ		(GIC_SPI_START + 63)
+#define SMMU_MDP0_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 64)
+#define SMMU_JPEGD_CB_SC_SECURE_IRQ		(GIC_SPI_START + 65)
+#define SMMU_JPEGD_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 66)
+#define SMMU_IJPEG_CB_SC_SECURE_IRQ		(GIC_SPI_START + 67)
+#define SMMU_IJPEG_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 68)
+#define SMMU_GFX3D_CB_SC_SECURE_IRQ		(GIC_SPI_START + 69)
+#define SMMU_GFX3D_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 70)
+#define SMMU_GFX2D0_CB_SC_SECURE_IRQ		(GIC_SPI_START + 71)
+#define SMMU_GFX2D0_CB_SC_NON_SECURE_IRQ	(GIC_SPI_START + 72)
+#define ROT_IRQ					(GIC_SPI_START + 73)
+#define MMSS_FABRIC_IRQ				(GIC_SPI_START + 74)
+#define MDP_IRQ					(GIC_SPI_START + 75)
+#define JPEGD_IRQ				(GIC_SPI_START + 76)
+#define JPEG_IRQ				(GIC_SPI_START + 77)
+#define MMSS_IMEM_IRQ				(GIC_SPI_START + 78)
+#define HDMI_IRQ				(GIC_SPI_START + 79)
+#define GFX3D_IRQ				(GIC_SPI_START + 80)
+#define GFX2D0_IRQ				(GIC_SPI_START + 81)
+#define DSI_IRQ					(GIC_SPI_START + 82)
+#define CSI_1_IRQ				(GIC_SPI_START + 83)
+#define CSI_0_IRQ				(GIC_SPI_START + 84)
+#define LPASS_SCSS_AUDIO_IF_OUT0_IRQ		(GIC_SPI_START + 85)
+#define LPASS_SCSS_MIDI_IRQ			(GIC_SPI_START + 86)
+#define LPASS_Q6SS_WDOG_EXPIRED			(GIC_SPI_START + 87)
+#define LPASS_SCSS_GP_LOW_IRQ			(GIC_SPI_START + 88)
+#define LPASS_SCSS_GP_MEDIUM_IRQ		(GIC_SPI_START + 89)
+#define LPASS_SCSS_GP_HIGH_IRQ			(GIC_SPI_START + 90)
+#define TOP_IMEM_IRQ				(GIC_SPI_START + 91)
+#define FABRIC_SYS_IRQ				(GIC_SPI_START + 92)
+#define FABRIC_APPS_IRQ				(GIC_SPI_START + 93)
+#define USB1_HS_BAM_IRQ				(GIC_SPI_START + 94)
+#define SDC4_BAM_IRQ				(GIC_SPI_START + 95)
+#define SDC3_BAM_IRQ				(GIC_SPI_START + 96)
+#define SDC2_BAM_IRQ				(GIC_SPI_START + 97)
+#define SDC1_BAM_IRQ				(GIC_SPI_START + 98)
+#define FABRIC_SPS_IRQ				(GIC_SPI_START + 99)
+#define USB1_HS_IRQ				(GIC_SPI_START + 100)
+#define SDC4_IRQ_0				(GIC_SPI_START + 101)
+#define SDC3_IRQ_0				(GIC_SPI_START + 102)
+#define SDC2_IRQ_0				(GIC_SPI_START + 103)
+#define SDC1_IRQ_0				(GIC_SPI_START + 104)
+#define SPS_BAM_DMA_IRQ				(GIC_SPI_START + 105)
+#define SPS_SEC_VIOL_IRQ			(GIC_SPI_START + 106)
+#define SPS_MTI_0				(GIC_SPI_START + 107)
+#define SPS_MTI_1				(GIC_SPI_START + 108)
+#define SPS_MTI_2				(GIC_SPI_START + 109)
+#define SPS_MTI_3				(GIC_SPI_START + 110)
+#define SPS_MTI_4				(GIC_SPI_START + 111)
+#define SPS_MTI_5				(GIC_SPI_START + 112)
+#define SPS_MTI_6				(GIC_SPI_START + 113)
+#define SPS_MTI_7				(GIC_SPI_START + 114)
+#define SPS_MTI_8				(GIC_SPI_START + 115)
+#define SPS_MTI_9				(GIC_SPI_START + 116)
+#define SPS_MTI_10				(GIC_SPI_START + 117)
+#define SPS_MTI_11				(GIC_SPI_START + 118)
+#define SPS_MTI_12				(GIC_SPI_START + 119)
+#define SPS_MTI_13				(GIC_SPI_START + 120)
+#define SPS_MTI_14				(GIC_SPI_START + 121)
+#define SPS_MTI_15				(GIC_SPI_START + 122)
+#define SPS_MTI_16				(GIC_SPI_START + 123)
+#define SPS_MTI_17				(GIC_SPI_START + 124)
+#define SPS_MTI_18				(GIC_SPI_START + 125)
+#define SPS_MTI_19				(GIC_SPI_START + 126)
+#define SPS_MTI_20				(GIC_SPI_START + 127)
+#define SPS_MTI_21				(GIC_SPI_START + 128)
+#define SPS_MTI_22				(GIC_SPI_START + 129)
+#define SPS_MTI_23				(GIC_SPI_START + 130)
+#define SPS_MTI_24				(GIC_SPI_START + 131)
+#define SPS_MTI_25				(GIC_SPI_START + 132)
+#define SPS_MTI_26				(GIC_SPI_START + 133)
+#define SPS_MTI_27				(GIC_SPI_START + 134)
+#define SPS_MTI_28				(GIC_SPI_START + 135)
+#define SPS_MTI_29				(GIC_SPI_START + 136)
+#define SPS_MTI_30				(GIC_SPI_START + 137)
+#define SPS_MTI_31				(GIC_SPI_START + 138)
+#define UXMC_EBI2_WR_ER_DONE_IRQ		(GIC_SPI_START + 139)
+#define UXMC_EBI2_OP_DONE_IRQ			(GIC_SPI_START + 140)
+#define USB2_IRQ				(GIC_SPI_START + 141)
+#define USB1_IRQ				(GIC_SPI_START + 142)
+#define TSSC_SSBI_IRQ				(GIC_SPI_START + 143)
+#define TSSC_SAMPLE_IRQ				(GIC_SPI_START + 144)
+#define TSSC_PENUP_IRQ				(GIC_SPI_START + 145)
+#define INT_UART1DM_IRQ				(GIC_SPI_START + 146)
+#define GSBI1_QUP_IRQ				(GIC_SPI_START + 147)
+#define INT_UART2DM_IRQ				(GIC_SPI_START + 148)
+#define GSBI2_QUP_IRQ				(GIC_SPI_START + 149)
+#define INT_UART3DM_IRQ				(GIC_SPI_START + 150)
+#define GSBI3_QUP_IRQ				(GIC_SPI_START + 151)
+#define INT_UART4DM_IRQ				(GIC_SPI_START + 152)
+#define GSBI4_QUP_IRQ				(GIC_SPI_START + 153)
+#define INT_UART5DM_IRQ				(GIC_SPI_START + 154)
+#define GSBI5_QUP_IRQ				(GIC_SPI_START + 155)
+#define INT_UART6DM_IRQ				(GIC_SPI_START + 156)
+#define GSBI6_QUP_IRQ				(GIC_SPI_START + 157)
+#define INT_UART7DM_IRQ				(GIC_SPI_START + 158)
+#define GSBI7_QUP_IRQ				(GIC_SPI_START + 159)
+#define INT_UART8DM_IRQ				(GIC_SPI_START + 160)
+#define GSBI8_QUP_IRQ				(GIC_SPI_START + 161)
+#define TSIF_TSPP_IRQ				(GIC_SPI_START + 162)
+#define TSIF_BAM_IRQ				(GIC_SPI_START + 163)
+#define TSIF2_IRQ				(GIC_SPI_START + 164)
+#define TSIF1_IRQ				(GIC_SPI_START + 165)
+#define INT_ADM1_MASTER				(GIC_SPI_START + 166)
+#define INT_ADM1_AARM				(GIC_SPI_START + 167)
+#define INT_ADM1_SD2				(GIC_SPI_START + 168)
+#define INT_ADM1_SD3				(GIC_SPI_START + 169)
+#define INT_ADM0_MASTER				(GIC_SPI_START + 170)
+#define INT_ADM0_AARM				(GIC_SPI_START + 171)
+#define INT_ADM0_SD2				(GIC_SPI_START + 172)
+#define INT_ADM0_SD3				(GIC_SPI_START + 173)
+#define CC_SCSS_WDT1CPU1BITEEXPIRED		(GIC_SPI_START + 174)
+#define CC_SCSS_WDT1CPU0BITEEXPIRED		(GIC_SPI_START + 175)
+#define CC_SCSS_WDT0CPU1BITEEXPIRED		(GIC_SPI_START + 176)
+#define CC_SCSS_WDT0CPU0BITEEXPIRED		(GIC_SPI_START + 177)
+#define TSENS_UPPER_LOWER_INT			(GIC_SPI_START + 178)
+#define SSBI2_2_SC_CPU1_SECURE_INT		(GIC_SPI_START + 179)
+#define SSBI2_2_SC_CPU1_NON_SECURE_INT		(GIC_SPI_START + 180)
+#define SSBI2_1_SC_CPU1_SECURE_INT		(GIC_SPI_START + 181)
+#define SSBI2_1_SC_CPU1_NON_SECURE_INT		(GIC_SPI_START + 182)
+#define XPU_SUMMARY_IRQ				(GIC_SPI_START + 183)
+#define BUS_EXCEPTION_SUMMARY_IRQ		(GIC_SPI_START + 184)
+#define HSDDRX_SMICH0_IRQ			(GIC_SPI_START + 185)
+#define HSDDRX_EBI1_IRQ				(GIC_SPI_START + 186)
+#define SDC5_BAM_IRQ				(GIC_SPI_START + 187)
+#define SDC5_IRQ_0				(GIC_SPI_START + 188)
+#define INT_UART9DM_IRQ				(GIC_SPI_START + 189)
+#define GSBI9_QUP_IRQ				(GIC_SPI_START + 190)
+#define INT_UART10DM_IRQ			(GIC_SPI_START + 191)
+#define GSBI10_QUP_IRQ				(GIC_SPI_START + 192)
+#define INT_UART11DM_IRQ			(GIC_SPI_START + 193)
+#define GSBI11_QUP_IRQ				(GIC_SPI_START + 194)
+#define INT_UART12DM_IRQ			(GIC_SPI_START + 195)
+#define GSBI12_QUP_IRQ				(GIC_SPI_START + 196)
+/*SPI 197 to 216 arent used in 8x60*/
+#define SMPSS_SPARE_1				(GIC_SPI_START + 217)
+#define SMPSS_SPARE_2				(GIC_SPI_START + 218)
+#define SMPSS_SPARE_3				(GIC_SPI_START + 219)
+#define SMPSS_SPARE_4				(GIC_SPI_START + 220)
+#define SMPSS_SPARE_5				(GIC_SPI_START + 221)
+#define SMPSS_SPARE_6				(GIC_SPI_START + 222)
+#define SMPSS_SPARE_7				(GIC_SPI_START + 223)
+
+#define NR_GPIO_IRQS 173
+#define NR_MSM_IRQS 256
+#define NR_BOARD_IRQS 0
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/irqs.h b/arch/arm/mach-msm/include/mach/irqs.h
index 164d355c96e..8679a456474 100644
--- a/arch/arm/mach-msm/include/mach/irqs.h
+++ b/arch/arm/mach-msm/include/mach/irqs.h
@@ -24,6 +24,8 @@
 #elif defined(CONFIG_ARCH_QSD8X50)
 #include "irqs-8x50.h"
 #include "sirc.h"
+#elif defined(CONFIG_ARCH_MSM8X60)
+#include "irqs-8x60.h"
 #elif defined(CONFIG_ARCH_MSM_ARM11)
 #include "irqs-7x00.h"
 #else
diff --git a/arch/arm/mach-msm/include/mach/memory.h b/arch/arm/mach-msm/include/mach/memory.h
index 50c7847e600..070e17d237f 100644
--- a/arch/arm/mach-msm/include/mach/memory.h
+++ b/arch/arm/mach-msm/include/mach/memory.h
@@ -23,6 +23,8 @@
 #define PHYS_OFFSET		UL(0x20000000)
 #elif defined(CONFIG_ARCH_MSM7X30)
 #define PHYS_OFFSET		UL(0x00200000)
+#elif defined(CONFIG_ARCH_MSM8X60)
+#define PHYS_OFFSET		UL(0x40200000)
 #else
 #define PHYS_OFFSET		UL(0x10000000)
 #endif
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h
new file mode 100644
index 00000000000..45bab50e3ee
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h
@@ -0,0 +1,101 @@
+/*
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ *
+ * The MSM peripherals are spread all over across 768MB of physical
+ * space, which makes just having a simple IO_ADDRESS macro to slide
+ * them into the right virtual location rough.  Instead, we will
+ * provide a master phys->virt mapping for peripherals here.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_IOMAP_8X60_H
+#define __ASM_ARCH_MSM_IOMAP_8X60_H
+
+/* Physical base address and size of peripherals.
+ * Ordered by the virtual base addresses they will be mapped at.
+ *
+ * MSM_VIC_BASE must be an value that can be loaded via a "mov"
+ * instruction, otherwise entry-macro.S will not compile.
+ *
+ * If you add or remove entries here, you'll want to edit the
+ * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your
+ * changes.
+ *
+ */
+
+#define MSM_QGIC_DIST_BASE	IOMEM(0xF0000000)
+#define MSM_QGIC_DIST_PHYS	0x02080000
+#define MSM_QGIC_DIST_SIZE	SZ_4K
+
+#define MSM_QGIC_CPU_BASE	IOMEM(0xF0001000)
+#define MSM_QGIC_CPU_PHYS	0x02081000
+#define MSM_QGIC_CPU_SIZE	SZ_4K
+
+#define MSM_ACC_BASE		IOMEM(0xF0002000)
+#define MSM_ACC_PHYS		0x02001000
+#define MSM_ACC_SIZE		SZ_4K
+
+#define MSM_GCC_BASE		IOMEM(0xF0003000)
+#define MSM_GCC_PHYS		0x02082000
+#define MSM_GCC_SIZE		SZ_4K
+
+#define MSM_TLMM_BASE		IOMEM(0xF0004000)
+#define MSM_TLMM_PHYS		0x00800000
+#define MSM_TLMM_SIZE		SZ_16K
+
+#define MSM_SHARED_RAM_BASE	IOMEM(0xF0100000)
+#define MSM_SHARED_RAM_SIZE	SZ_1M
+
+#define MSM_TMR_BASE		IOMEM(0xF0200000)
+#define MSM_TMR_PHYS		0x02000000
+#define MSM_TMR_SIZE		(SZ_1M)
+
+#define MSM_GPT_BASE		(MSM_TMR_BASE + 0x4)
+#define MSM_DGT_BASE		(MSM_TMR_BASE + 0x24)
+
+#define MSM_IOMMU_JPEGD_PHYS	0x07300000
+#define MSM_IOMMU_JPEGD_SIZE	SZ_1M
+
+#define MSM_IOMMU_VPE_PHYS	0x07400000
+#define MSM_IOMMU_VPE_SIZE	SZ_1M
+
+#define MSM_IOMMU_MDP0_PHYS	0x07500000
+#define MSM_IOMMU_MDP0_SIZE	SZ_1M
+
+#define MSM_IOMMU_MDP1_PHYS	0x07600000
+#define MSM_IOMMU_MDP1_SIZE	SZ_1M
+
+#define MSM_IOMMU_ROT_PHYS	0x07700000
+#define MSM_IOMMU_ROT_SIZE	SZ_1M
+
+#define MSM_IOMMU_IJPEG_PHYS	0x07800000
+#define MSM_IOMMU_IJPEG_SIZE	SZ_1M
+
+#define MSM_IOMMU_VFE_PHYS	0x07900000
+#define MSM_IOMMU_VFE_SIZE	SZ_1M
+
+#define MSM_IOMMU_VCODEC_A_PHYS	0x07A00000
+#define MSM_IOMMU_VCODEC_A_SIZE	SZ_1M
+
+#define MSM_IOMMU_VCODEC_B_PHYS	0x07B00000
+#define MSM_IOMMU_VCODEC_B_SIZE	SZ_1M
+
+#define MSM_IOMMU_GFX3D_PHYS	0x07C00000
+#define MSM_IOMMU_GFX3D_SIZE	SZ_1M
+
+#define MSM_IOMMU_GFX2D0_PHYS	0x07D00000
+#define MSM_IOMMU_GFX2D0_SIZE	SZ_1M
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap.h b/arch/arm/mach-msm/include/mach/msm_iomap.h
index e6b1821cc4e..8e24dd81213 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap.h
@@ -47,8 +47,12 @@
 #include "msm_iomap-7x30.h"
 #elif defined(CONFIG_ARCH_QSD8X50)
 #include "msm_iomap-8x50.h"
+#elif defined(CONFIG_ARCH_MSM8X60)
+#include "msm_iomap-8x60.h"
 #else
 #include "msm_iomap-7x00.h"
 #endif
 
+
+
 #endif
diff --git a/arch/arm/mach-msm/include/mach/smp.h b/arch/arm/mach-msm/include/mach/smp.h
new file mode 100644
index 00000000000..3ff7bf5e679
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/smp.h
@@ -0,0 +1,39 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Code Aurora nor
+ *       the names of its contributors may be used to endorse or promote
+ *       products derived from this software without specific prior written
+ *       permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NON-INFRINGEMENT ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+ * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_SMP_H
+#define __ASM_ARCH_MSM_SMP_H
+
+#include <asm/hardware/gic.h>
+
+static inline void smp_cross_call(const struct cpumask *mask)
+{
+	gic_raise_softirq(mask, 1);
+}
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/vmalloc.h b/arch/arm/mach-msm/include/mach/vmalloc.h
index 05f81fd8623..31a32ad062d 100644
--- a/arch/arm/mach-msm/include/mach/vmalloc.h
+++ b/arch/arm/mach-msm/include/mach/vmalloc.h
@@ -16,7 +16,7 @@
 #ifndef __ASM_ARCH_MSM_VMALLOC_H
 #define __ASM_ARCH_MSM_VMALLOC_H
 
-#define VMALLOC_END	  (PAGE_OFFSET + 0x10000000)
+#define VMALLOC_END	  0xd0000000
 
 #endif
 
diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c
index 1c05060b5f3..d36b6107414 100644
--- a/arch/arm/mach-msm/io.c
+++ b/arch/arm/mach-msm/io.c
@@ -100,6 +100,21 @@ void __init msm_map_qsd8x50_io(void)
 }
 #endif /* CONFIG_ARCH_QSD8X50 */
 
+#ifdef CONFIG_ARCH_MSM8X60
+static struct map_desc msm8x60_io_desc[] __initdata = {
+	MSM_DEVICE(QGIC_DIST),
+	MSM_DEVICE(QGIC_CPU),
+	MSM_DEVICE(TMR),
+	MSM_DEVICE(ACC),
+	MSM_DEVICE(GCC),
+};
+
+void __init msm_map_msm8x60_io(void)
+{
+	iotable_init(msm8x60_io_desc, ARRAY_SIZE(msm8x60_io_desc));
+}
+#endif /* CONFIG_ARCH_MSM8X60 */
+
 #ifdef CONFIG_ARCH_MSM7X30
 static struct map_desc msm7x30_io_desc[] __initdata = {
 	MSM_DEVICE(VIC),
diff --git a/arch/arm/mach-msm/iommu.c b/arch/arm/mach-msm/iommu.c
new file mode 100644
index 00000000000..f71747db3be
--- /dev/null
+++ b/arch/arm/mach-msm/iommu.c
@@ -0,0 +1,597 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/iommu.h>
+
+#include <asm/cacheflush.h>
+#include <asm/sizes.h>
+
+#include <mach/iommu_hw-8xxx.h>
+#include <mach/iommu.h>
+
+DEFINE_SPINLOCK(msm_iommu_lock);
+
+struct msm_priv {
+	unsigned long *pgtable;
+	struct list_head list_attached;
+};
+
+static void __flush_iotlb(struct iommu_domain *domain)
+{
+	struct msm_priv *priv = domain->priv;
+	struct msm_iommu_drvdata *iommu_drvdata;
+	struct msm_iommu_ctx_drvdata *ctx_drvdata;
+
+#ifndef CONFIG_IOMMU_PGTABLES_L2
+	unsigned long *fl_table = priv->pgtable;
+	int i;
+
+	dmac_flush_range(fl_table, fl_table + SZ_16K);
+
+	for (i = 0; i < NUM_FL_PTE; i++)
+		if ((fl_table[i] & 0x03) == FL_TYPE_TABLE) {
+			void *sl_table = __va(fl_table[i] & FL_BASE_MASK);
+			dmac_flush_range(sl_table, sl_table + SZ_4K);
+		}
+#endif
+
+	list_for_each_entry(ctx_drvdata, &priv->list_attached, attached_elm) {
+		if (!ctx_drvdata->pdev || !ctx_drvdata->pdev->dev.parent)
+			BUG();
+
+		iommu_drvdata = dev_get_drvdata(ctx_drvdata->pdev->dev.parent);
+		SET_CTX_TLBIALL(iommu_drvdata->base, ctx_drvdata->num, 0);
+	}
+}
+
+static void __reset_context(void __iomem *base, int ctx)
+{
+	SET_BPRCOSH(base, ctx, 0);
+	SET_BPRCISH(base, ctx, 0);
+	SET_BPRCNSH(base, ctx, 0);
+	SET_BPSHCFG(base, ctx, 0);
+	SET_BPMTCFG(base, ctx, 0);
+	SET_ACTLR(base, ctx, 0);
+	SET_SCTLR(base, ctx, 0);
+	SET_FSRRESTORE(base, ctx, 0);
+	SET_TTBR0(base, ctx, 0);
+	SET_TTBR1(base, ctx, 0);
+	SET_TTBCR(base, ctx, 0);
+	SET_BFBCR(base, ctx, 0);
+	SET_PAR(base, ctx, 0);
+	SET_FAR(base, ctx, 0);
+	SET_CTX_TLBIALL(base, ctx, 0);
+	SET_TLBFLPTER(base, ctx, 0);
+	SET_TLBSLPTER(base, ctx, 0);
+	SET_TLBLKCR(base, ctx, 0);
+	SET_PRRR(base, ctx, 0);
+	SET_NMRR(base, ctx, 0);
+	SET_CONTEXTIDR(base, ctx, 0);
+}
+
+static void __program_context(void __iomem *base, int ctx, phys_addr_t pgtable)
+{
+	__reset_context(base, ctx);
+
+	/* Set up HTW mode */
+	/* TLB miss configuration: perform HTW on miss */
+	SET_TLBMCFG(base, ctx, 0x3);
+
+	/* V2P configuration: HTW for access */
+	SET_V2PCFG(base, ctx, 0x3);
+
+	SET_TTBCR(base, ctx, 0);
+	SET_TTBR0_PA(base, ctx, (pgtable >> 14));
+
+	/* Invalidate the TLB for this context */
+	SET_CTX_TLBIALL(base, ctx, 0);
+
+	/* Set interrupt number to "secure" interrupt */
+	SET_IRPTNDX(base, ctx, 0);
+
+	/* Enable context fault interrupt */
+	SET_CFEIE(base, ctx, 1);
+
+	/* Stall access on a context fault and let the handler deal with it */
+	SET_CFCFG(base, ctx, 1);
+
+	/* Redirect all cacheable requests to L2 slave port. */
+	SET_RCISH(base, ctx, 1);
+	SET_RCOSH(base, ctx, 1);
+	SET_RCNSH(base, ctx, 1);
+
+	/* Turn on TEX Remap */
+	SET_TRE(base, ctx, 1);
+
+	/* Do not configure PRRR / NMRR on the IOMMU for now. We will assume
+	 * TEX class 0 for everything until attributes are properly worked out
+	 */
+	SET_PRRR(base, ctx, 0);
+	SET_NMRR(base, ctx, 0);
+
+	/* Turn on BFB prefetch */
+	SET_BFBDFE(base, ctx, 1);
+
+#ifdef CONFIG_IOMMU_PGTABLES_L2
+	/* Configure page tables as inner-cacheable and shareable to reduce
+	 * the TLB miss penalty.
+	 */
+	SET_TTBR0_SH(base, ctx, 1);
+	SET_TTBR1_SH(base, ctx, 1);
+
+	SET_TTBR0_NOS(base, ctx, 1);
+	SET_TTBR1_NOS(base, ctx, 1);
+
+	SET_TTBR0_IRGNH(base, ctx, 0); /* WB, WA */
+	SET_TTBR0_IRGNL(base, ctx, 1);
+
+	SET_TTBR1_IRGNH(base, ctx, 0); /* WB, WA */
+	SET_TTBR1_IRGNL(base, ctx, 1);
+
+	SET_TTBR0_ORGN(base, ctx, 1); /* WB, WA */
+	SET_TTBR1_ORGN(base, ctx, 1); /* WB, WA */
+#endif
+
+	/* Enable the MMU */
+	SET_M(base, ctx, 1);
+}
+
+static int msm_iommu_domain_init(struct iommu_domain *domain)
+{
+	struct msm_priv *priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+
+	if (!priv)
+		goto fail_nomem;
+
+	INIT_LIST_HEAD(&priv->list_attached);
+	priv->pgtable = (unsigned long *)__get_free_pages(GFP_KERNEL,
+							  get_order(SZ_16K));
+
+	if (!priv->pgtable)
+		goto fail_nomem;
+
+	memset(priv->pgtable, 0, SZ_16K);
+	domain->priv = priv;
+	return 0;
+
+fail_nomem:
+	kfree(priv);
+	return -ENOMEM;
+}
+
+static void msm_iommu_domain_destroy(struct iommu_domain *domain)
+{
+	struct msm_priv *priv;
+	unsigned long flags;
+	unsigned long *fl_table;
+	int i;
+
+	spin_lock_irqsave(&msm_iommu_lock, flags);
+	priv = domain->priv;
+	domain->priv = NULL;
+
+	if (priv) {
+		fl_table = priv->pgtable;
+
+		for (i = 0; i < NUM_FL_PTE; i++)
+			if ((fl_table[i] & 0x03) == FL_TYPE_TABLE)
+				free_page((unsigned long) __va(((fl_table[i]) &
+								FL_BASE_MASK)));
+
+		free_pages((unsigned long)priv->pgtable, get_order(SZ_16K));
+		priv->pgtable = NULL;
+	}
+
+	kfree(priv);
+	spin_unlock_irqrestore(&msm_iommu_lock, flags);
+}
+
+static int msm_iommu_attach_dev(struct iommu_domain *domain, struct device *dev)
+{
+	struct msm_priv *priv;
+	struct msm_iommu_ctx_dev *ctx_dev;
+	struct msm_iommu_drvdata *iommu_drvdata;
+	struct msm_iommu_ctx_drvdata *ctx_drvdata;
+	struct msm_iommu_ctx_drvdata *tmp_drvdata;
+	int ret = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&msm_iommu_lock, flags);
+
+	priv = domain->priv;
+
+	if (!priv || !dev) {
+		ret = -EINVAL;
+		goto fail;
+	}
+
+	iommu_drvdata = dev_get_drvdata(dev->parent);
+	ctx_drvdata = dev_get_drvdata(dev);
+	ctx_dev = dev->platform_data;
+
+	if (!iommu_drvdata || !ctx_drvdata || !ctx_dev) {
+		ret = -EINVAL;
+		goto fail;
+	}
+
+	list_for_each_entry(tmp_drvdata, &priv->list_attached, attached_elm)
+		if (tmp_drvdata == ctx_drvdata) {
+			ret = -EBUSY;
+			goto fail;
+		}
+
+	__program_context(iommu_drvdata->base, ctx_dev->num,
+			  __pa(priv->pgtable));
+
+	list_add(&(ctx_drvdata->attached_elm), &priv->list_attached);
+	__flush_iotlb(domain);
+
+fail:
+	spin_unlock_irqrestore(&msm_iommu_lock, flags);
+	return ret;
+}
+
+static void msm_iommu_detach_dev(struct iommu_domain *domain,
+				 struct device *dev)
+{
+	struct msm_priv *priv;
+	struct msm_iommu_ctx_dev *ctx_dev;
+	struct msm_iommu_drvdata *iommu_drvdata;
+	struct msm_iommu_ctx_drvdata *ctx_drvdata;
+	unsigned long flags;
+
+	spin_lock_irqsave(&msm_iommu_lock, flags);
+	priv = domain->priv;
+
+	if (!priv || !dev)
+		goto fail;
+
+	iommu_drvdata = dev_get_drvdata(dev->parent);
+	ctx_drvdata = dev_get_drvdata(dev);
+	ctx_dev = dev->platform_data;
+
+	if (!iommu_drvdata || !ctx_drvdata || !ctx_dev)
+		goto fail;
+
+	__flush_iotlb(domain);
+	__reset_context(iommu_drvdata->base, ctx_dev->num);
+	list_del_init(&ctx_drvdata->attached_elm);
+
+fail:
+	spin_unlock_irqrestore(&msm_iommu_lock, flags);
+}
+
+static int msm_iommu_map(struct iommu_domain *domain, unsigned long va,
+			 phys_addr_t pa, int order, int prot)
+{
+	struct msm_priv *priv;
+	unsigned long flags;
+	unsigned long *fl_table;
+	unsigned long *fl_pte;
+	unsigned long fl_offset;
+	unsigned long *sl_table;
+	unsigned long *sl_pte;
+	unsigned long sl_offset;
+	size_t len = 0x1000UL << order;
+	int ret = 0;
+
+	spin_lock_irqsave(&msm_iommu_lock, flags);
+	priv = domain->priv;
+
+	if (!priv) {
+		ret = -EINVAL;
+		goto fail;
+	}
+
+	fl_table = priv->pgtable;
+
+	if (len != SZ_16M && len != SZ_1M &&
+	    len != SZ_64K && len != SZ_4K) {
+		pr_debug("Bad size: %d\n", len);
+		ret = -EINVAL;
+		goto fail;
+	}
+
+	if (!fl_table) {
+		pr_debug("Null page table\n");
+		ret = -EINVAL;
+		goto fail;
+	}
+
+	fl_offset = FL_OFFSET(va);	/* Upper 12 bits */
+	fl_pte = fl_table + fl_offset;	/* int pointers, 4 bytes */
+
+	if (len == SZ_16M) {
+		int i = 0;
+		for (i = 0; i < 16; i++)
+			*(fl_pte+i) = (pa & 0xFF000000) | FL_SUPERSECTION |
+				  FL_AP_READ | FL_AP_WRITE | FL_TYPE_SECT |
+				  FL_SHARED;
+	}
+
+	if (len == SZ_1M)
+		*fl_pte = (pa & 0xFFF00000) | FL_AP_READ | FL_AP_WRITE |
+						FL_TYPE_SECT | FL_SHARED;
+
+	/* Need a 2nd level table */
+	if ((len == SZ_4K || len == SZ_64K) && (*fl_pte) == 0) {
+		unsigned long *sl;
+		sl = (unsigned long *) __get_free_pages(GFP_KERNEL,
+							get_order(SZ_4K));
+
+		if (!sl) {
+			pr_debug("Could not allocate second level table\n");
+			ret = -ENOMEM;
+			goto fail;
+		}
+
+		memset(sl, 0, SZ_4K);
+		*fl_pte = ((((int)__pa(sl)) & FL_BASE_MASK) | FL_TYPE_TABLE);
+	}
+
+	sl_table = (unsigned long *) __va(((*fl_pte) & FL_BASE_MASK));
+	sl_offset = SL_OFFSET(va);
+	sl_pte = sl_table + sl_offset;
+
+
+	if (len == SZ_4K)
+		*sl_pte = (pa & SL_BASE_MASK_SMALL) | SL_AP0 | SL_AP1 |
+					  SL_SHARED | SL_TYPE_SMALL;
+
+	if (len == SZ_64K) {
+		int i;
+
+		for (i = 0; i < 16; i++)
+			*(sl_pte+i) = (pa & SL_BASE_MASK_LARGE) | SL_AP0 |
+					    SL_AP1 | SL_SHARED | SL_TYPE_LARGE;
+	}
+
+	__flush_iotlb(domain);
+fail:
+	spin_unlock_irqrestore(&msm_iommu_lock, flags);
+	return ret;
+}
+
+static int msm_iommu_unmap(struct iommu_domain *domain, unsigned long va,
+			    int order)
+{
+	struct msm_priv *priv;
+	unsigned long flags;
+	unsigned long *fl_table;
+	unsigned long *fl_pte;
+	unsigned long fl_offset;
+	unsigned long *sl_table;
+	unsigned long *sl_pte;
+	unsigned long sl_offset;
+	size_t len = 0x1000UL << order;
+	int i, ret = 0;
+
+	spin_lock_irqsave(&msm_iommu_lock, flags);
+
+	priv = domain->priv;
+
+	if (!priv) {
+		ret = -ENODEV;
+		goto fail;
+	}
+
+	fl_table = priv->pgtable;
+
+	if (len != SZ_16M && len != SZ_1M &&
+	    len != SZ_64K && len != SZ_4K) {
+		pr_debug("Bad length: %d\n", len);
+		ret = -EINVAL;
+		goto fail;
+	}
+
+	if (!fl_table) {
+		pr_debug("Null page table\n");
+		ret = -EINVAL;
+		goto fail;
+	}
+
+	fl_offset = FL_OFFSET(va);	/* Upper 12 bits */
+	fl_pte = fl_table + fl_offset;	/* int pointers, 4 bytes */
+
+	if (*fl_pte == 0) {
+		pr_debug("First level PTE is 0\n");
+		ret = -ENODEV;
+		goto fail;
+	}
+
+	/* Unmap supersection */
+	if (len == SZ_16M)
+		for (i = 0; i < 16; i++)
+			*(fl_pte+i) = 0;
+
+	if (len == SZ_1M)
+		*fl_pte = 0;
+
+	sl_table = (unsigned long *) __va(((*fl_pte) & FL_BASE_MASK));
+	sl_offset = SL_OFFSET(va);
+	sl_pte = sl_table + sl_offset;
+
+	if (len == SZ_64K) {
+		for (i = 0; i < 16; i++)
+			*(sl_pte+i) = 0;
+	}
+
+	if (len == SZ_4K)
+		*sl_pte = 0;
+
+	if (len == SZ_4K || len == SZ_64K) {
+		int used = 0;
+
+		for (i = 0; i < NUM_SL_PTE; i++)
+			if (sl_table[i])
+				used = 1;
+		if (!used) {
+			free_page((unsigned long)sl_table);
+			*fl_pte = 0;
+		}
+	}
+
+	__flush_iotlb(domain);
+fail:
+	spin_unlock_irqrestore(&msm_iommu_lock, flags);
+	return ret;
+}
+
+static phys_addr_t msm_iommu_iova_to_phys(struct iommu_domain *domain,
+					  unsigned long va)
+{
+	struct msm_priv *priv;
+	struct msm_iommu_drvdata *iommu_drvdata;
+	struct msm_iommu_ctx_drvdata *ctx_drvdata;
+	unsigned int par;
+	unsigned long flags;
+	void __iomem *base;
+	phys_addr_t ret = 0;
+	int ctx;
+
+	spin_lock_irqsave(&msm_iommu_lock, flags);
+
+	priv = domain->priv;
+	if (list_empty(&priv->list_attached))
+		goto fail;
+
+	ctx_drvdata = list_entry(priv->list_attached.next,
+				 struct msm_iommu_ctx_drvdata, attached_elm);
+	iommu_drvdata = dev_get_drvdata(ctx_drvdata->pdev->dev.parent);
+
+	base = iommu_drvdata->base;
+	ctx = ctx_drvdata->num;
+
+	/* Invalidate context TLB */
+	SET_CTX_TLBIALL(base, ctx, 0);
+	SET_V2PPR_VA(base, ctx, va >> V2Pxx_VA_SHIFT);
+
+	if (GET_FAULT(base, ctx))
+		goto fail;
+
+	par = GET_PAR(base, ctx);
+
+	/* We are dealing with a supersection */
+	if (GET_NOFAULT_SS(base, ctx))
+		ret = (par & 0xFF000000) | (va & 0x00FFFFFF);
+	else	/* Upper 20 bits from PAR, lower 12 from VA */
+		ret = (par & 0xFFFFF000) | (va & 0x00000FFF);
+
+fail:
+	spin_unlock_irqrestore(&msm_iommu_lock, flags);
+	return ret;
+}
+
+static int msm_iommu_domain_has_cap(struct iommu_domain *domain,
+				    unsigned long cap)
+{
+	return 0;
+}
+
+static void print_ctx_regs(void __iomem *base, int ctx)
+{
+	unsigned int fsr = GET_FSR(base, ctx);
+	pr_err("FAR    = %08x    PAR    = %08x\n",
+	       GET_FAR(base, ctx), GET_PAR(base, ctx));
+	pr_err("FSR    = %08x [%s%s%s%s%s%s%s%s%s%s]\n", fsr,
+			(fsr & 0x02) ? "TF " : "",
+			(fsr & 0x04) ? "AFF " : "",
+			(fsr & 0x08) ? "APF " : "",
+			(fsr & 0x10) ? "TLBMF " : "",
+			(fsr & 0x20) ? "HTWDEEF " : "",
+			(fsr & 0x40) ? "HTWSEEF " : "",
+			(fsr & 0x80) ? "MHF " : "",
+			(fsr & 0x10000) ? "SL " : "",
+			(fsr & 0x40000000) ? "SS " : "",
+			(fsr & 0x80000000) ? "MULTI " : "");
+
+	pr_err("FSYNR0 = %08x    FSYNR1 = %08x\n",
+	       GET_FSYNR0(base, ctx), GET_FSYNR1(base, ctx));
+	pr_err("TTBR0  = %08x    TTBR1  = %08x\n",
+	       GET_TTBR0(base, ctx), GET_TTBR1(base, ctx));
+	pr_err("SCTLR  = %08x    ACTLR  = %08x\n",
+	       GET_SCTLR(base, ctx), GET_ACTLR(base, ctx));
+	pr_err("PRRR   = %08x    NMRR   = %08x\n",
+	       GET_PRRR(base, ctx), GET_NMRR(base, ctx));
+}
+
+irqreturn_t msm_iommu_fault_handler(int irq, void *dev_id)
+{
+	struct msm_iommu_drvdata *drvdata = dev_id;
+	void __iomem *base;
+	unsigned int fsr = 0;
+	int ncb = 0, i = 0;
+
+	spin_lock(&msm_iommu_lock);
+
+	if (!drvdata) {
+		pr_err("Invalid device ID in context interrupt handler\n");
+		goto fail;
+	}
+
+	base = drvdata->base;
+
+	pr_err("===== WOAH! =====\n");
+	pr_err("Unexpected IOMMU page fault!\n");
+	pr_err("base = %08x\n", (unsigned int) base);
+
+	ncb = GET_NCB(base)+1;
+	for (i = 0; i < ncb; i++) {
+		fsr = GET_FSR(base, i);
+		if (fsr) {
+			pr_err("Fault occurred in context %d.\n", i);
+			pr_err("Interesting registers:\n");
+			print_ctx_regs(base, i);
+			SET_FSR(base, i, 0x4000000F);
+		}
+	}
+fail:
+	spin_unlock(&msm_iommu_lock);
+	return 0;
+}
+
+static struct iommu_ops msm_iommu_ops = {
+	.domain_init = msm_iommu_domain_init,
+	.domain_destroy = msm_iommu_domain_destroy,
+	.attach_dev = msm_iommu_attach_dev,
+	.detach_dev = msm_iommu_detach_dev,
+	.map = msm_iommu_map,
+	.unmap = msm_iommu_unmap,
+	.iova_to_phys = msm_iommu_iova_to_phys,
+	.domain_has_cap = msm_iommu_domain_has_cap
+};
+
+static int msm_iommu_init(void)
+{
+	register_iommu(&msm_iommu_ops);
+	return 0;
+}
+
+subsys_initcall(msm_iommu_init);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Stepan Moskovchenko <stepanm@codeaurora.org>");
diff --git a/arch/arm/mach-msm/iommu_dev.c b/arch/arm/mach-msm/iommu_dev.c
new file mode 100644
index 00000000000..c33ae786c41
--- /dev/null
+++ b/arch/arm/mach-msm/iommu_dev.c
@@ -0,0 +1,374 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/iommu.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+
+#include <mach/iommu_hw-8xxx.h>
+#include <mach/iommu.h>
+
+struct iommu_ctx_iter_data {
+	/* input */
+	const char *name;
+
+	/* output */
+	struct device *dev;
+};
+
+static struct platform_device *msm_iommu_root_dev;
+
+static int each_iommu_ctx(struct device *dev, void *data)
+{
+	struct iommu_ctx_iter_data *res = data;
+	struct msm_iommu_ctx_dev *c = dev->platform_data;
+
+	if (!res || !c || !c->name || !res->name)
+		return -EINVAL;
+
+	if (!strcmp(res->name, c->name)) {
+		res->dev = dev;
+		return 1;
+	}
+	return 0;
+}
+
+static int each_iommu(struct device *dev, void *data)
+{
+	return device_for_each_child(dev, data, each_iommu_ctx);
+}
+
+struct device *msm_iommu_get_ctx(const char *ctx_name)
+{
+	struct iommu_ctx_iter_data r;
+	int found;
+
+	if (!msm_iommu_root_dev) {
+		pr_err("No root IOMMU device.\n");
+		goto fail;
+	}
+
+	r.name = ctx_name;
+	found = device_for_each_child(&msm_iommu_root_dev->dev, &r, each_iommu);
+
+	if (!found) {
+		pr_err("Could not find context <%s>\n", ctx_name);
+		goto fail;
+	}
+
+	return r.dev;
+fail:
+	return NULL;
+}
+EXPORT_SYMBOL(msm_iommu_get_ctx);
+
+static void msm_iommu_reset(void __iomem *base)
+{
+	int ctx, ncb;
+
+	SET_RPUE(base, 0);
+	SET_RPUEIE(base, 0);
+	SET_ESRRESTORE(base, 0);
+	SET_TBE(base, 0);
+	SET_CR(base, 0);
+	SET_SPDMBE(base, 0);
+	SET_TESTBUSCR(base, 0);
+	SET_TLBRSW(base, 0);
+	SET_GLOBAL_TLBIALL(base, 0);
+	SET_RPU_ACR(base, 0);
+	SET_TLBLKCRWE(base, 1);
+	ncb = GET_NCB(base)+1;
+
+	for (ctx = 0; ctx < ncb; ctx++) {
+		SET_BPRCOSH(base, ctx, 0);
+		SET_BPRCISH(base, ctx, 0);
+		SET_BPRCNSH(base, ctx, 0);
+		SET_BPSHCFG(base, ctx, 0);
+		SET_BPMTCFG(base, ctx, 0);
+		SET_ACTLR(base, ctx, 0);
+		SET_SCTLR(base, ctx, 0);
+		SET_FSRRESTORE(base, ctx, 0);
+		SET_TTBR0(base, ctx, 0);
+		SET_TTBR1(base, ctx, 0);
+		SET_TTBCR(base, ctx, 0);
+		SET_BFBCR(base, ctx, 0);
+		SET_PAR(base, ctx, 0);
+		SET_FAR(base, ctx, 0);
+		SET_CTX_TLBIALL(base, ctx, 0);
+		SET_TLBFLPTER(base, ctx, 0);
+		SET_TLBSLPTER(base, ctx, 0);
+		SET_TLBLKCR(base, ctx, 0);
+		SET_PRRR(base, ctx, 0);
+		SET_NMRR(base, ctx, 0);
+		SET_CONTEXTIDR(base, ctx, 0);
+	}
+}
+
+static int msm_iommu_probe(struct platform_device *pdev)
+{
+	struct resource *r;
+	struct clk *iommu_clk;
+	struct msm_iommu_drvdata *drvdata;
+	struct msm_iommu_dev *iommu_dev = pdev->dev.platform_data;
+	void __iomem *regs_base;
+	resource_size_t	len;
+	int ret = 0, ncb, nm2v, irq;
+
+	if (pdev->id != -1) {
+		drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL);
+
+		if (!drvdata) {
+			ret = -ENOMEM;
+			goto fail;
+		}
+
+		if (!iommu_dev) {
+			ret = -ENODEV;
+			goto fail;
+		}
+
+		if (iommu_dev->clk_rate != 0) {
+			iommu_clk = clk_get(&pdev->dev, "iommu_clk");
+
+			if (IS_ERR(iommu_clk)) {
+				ret = -ENODEV;
+				goto fail;
+			}
+
+			if (iommu_dev->clk_rate > 0) {
+				ret = clk_set_rate(iommu_clk,
+							iommu_dev->clk_rate);
+				if (ret) {
+					clk_put(iommu_clk);
+					goto fail;
+				}
+			}
+
+			ret = clk_enable(iommu_clk);
+			if (ret) {
+				clk_put(iommu_clk);
+				goto fail;
+			}
+			clk_put(iommu_clk);
+		}
+
+		r = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+						 "physbase");
+		if (!r) {
+			ret = -ENODEV;
+			goto fail;
+		}
+
+		len = r->end - r->start + 1;
+
+		r = request_mem_region(r->start, len, r->name);
+		if (!r) {
+			pr_err("Could not request memory region: "
+			"start=%p, len=%d\n", (void *) r->start, len);
+			ret = -EBUSY;
+			goto fail;
+		}
+
+		regs_base = ioremap(r->start, len);
+
+		if (!regs_base) {
+			pr_err("Could not ioremap: start=%p, len=%d\n",
+				 (void *) r->start, len);
+			ret = -EBUSY;
+			goto fail;
+		}
+
+		irq = platform_get_irq_byname(pdev, "secure_irq");
+		if (irq < 0) {
+			ret = -ENODEV;
+			goto fail;
+		}
+
+		mb();
+
+		if (GET_IDR(regs_base) == 0) {
+			pr_err("Invalid IDR value detected\n");
+			ret = -ENODEV;
+			goto fail;
+		}
+
+		ret = request_irq(irq, msm_iommu_fault_handler, 0,
+				"msm_iommu_secure_irpt_handler", drvdata);
+		if (ret) {
+			pr_err("Request IRQ %d failed with ret=%d\n", irq, ret);
+			goto fail;
+		}
+
+		msm_iommu_reset(regs_base);
+		drvdata->base = regs_base;
+		drvdata->irq = irq;
+
+		nm2v = GET_NM2VCBMT((unsigned long) regs_base);
+		ncb = GET_NCB((unsigned long) regs_base);
+
+		pr_info("device %s mapped at %p, irq %d with %d ctx banks\n",
+			iommu_dev->name, regs_base, irq, ncb+1);
+
+		platform_set_drvdata(pdev, drvdata);
+	} else
+		msm_iommu_root_dev = pdev;
+
+	return 0;
+
+fail:
+	kfree(drvdata);
+	return ret;
+}
+
+static int msm_iommu_remove(struct platform_device *pdev)
+{
+	struct msm_iommu_drvdata *drv = NULL;
+
+	drv = platform_get_drvdata(pdev);
+	if (drv) {
+		memset(drv, 0, sizeof(struct msm_iommu_drvdata));
+		kfree(drv);
+		platform_set_drvdata(pdev, NULL);
+	}
+	return 0;
+}
+
+static int msm_iommu_ctx_probe(struct platform_device *pdev)
+{
+	struct msm_iommu_ctx_dev *c = pdev->dev.platform_data;
+	struct msm_iommu_drvdata *drvdata;
+	struct msm_iommu_ctx_drvdata *ctx_drvdata = NULL;
+	int i, ret = 0;
+	if (!c || !pdev->dev.parent) {
+		ret = -EINVAL;
+		goto fail;
+	}
+
+	drvdata = dev_get_drvdata(pdev->dev.parent);
+
+	if (!drvdata) {
+		ret = -ENODEV;
+		goto fail;
+	}
+
+	ctx_drvdata = kzalloc(sizeof(*ctx_drvdata), GFP_KERNEL);
+	if (!ctx_drvdata) {
+		ret = -ENOMEM;
+		goto fail;
+	}
+	ctx_drvdata->num = c->num;
+	ctx_drvdata->pdev = pdev;
+
+	INIT_LIST_HEAD(&ctx_drvdata->attached_elm);
+	platform_set_drvdata(pdev, ctx_drvdata);
+
+	/* Program the M2V tables for this context */
+	for (i = 0; i < MAX_NUM_MIDS; i++) {
+		int mid = c->mids[i];
+		if (mid == -1)
+			break;
+
+		SET_M2VCBR_N(drvdata->base, mid, 0);
+		SET_CBACR_N(drvdata->base, c->num, 0);
+
+		/* Set VMID = MID */
+		SET_VMID(drvdata->base, mid, mid);
+
+		/* Set the context number for that MID to this context */
+		SET_CBNDX(drvdata->base, mid, c->num);
+
+		/* Set MID associated with this context bank */
+		SET_CBVMID(drvdata->base, c->num, mid);
+
+		/* Set security bit override to be Non-secure */
+		SET_NSCFG(drvdata->base, mid, 3);
+	}
+
+	pr_info("context device %s with bank index %d\n", c->name, c->num);
+
+	return 0;
+fail:
+	kfree(ctx_drvdata);
+	return ret;
+}
+
+static int msm_iommu_ctx_remove(struct platform_device *pdev)
+{
+	struct msm_iommu_ctx_drvdata *drv = NULL;
+	drv = platform_get_drvdata(pdev);
+	if (drv) {
+		memset(drv, 0, sizeof(struct msm_iommu_ctx_drvdata));
+		kfree(drv);
+		platform_set_drvdata(pdev, NULL);
+	}
+	return 0;
+}
+
+static struct platform_driver msm_iommu_driver = {
+	.driver = {
+		.name	= "msm_iommu",
+	},
+	.probe		= msm_iommu_probe,
+	.remove		= msm_iommu_remove,
+};
+
+static struct platform_driver msm_iommu_ctx_driver = {
+	.driver = {
+		.name	= "msm_iommu_ctx",
+	},
+	.probe		= msm_iommu_ctx_probe,
+	.remove		= msm_iommu_ctx_remove,
+};
+
+static int msm_iommu_driver_init(void)
+{
+	int ret;
+	ret = platform_driver_register(&msm_iommu_driver);
+	if (ret != 0) {
+		pr_err("Failed to register IOMMU driver\n");
+		goto error;
+	}
+
+	ret = platform_driver_register(&msm_iommu_ctx_driver);
+	if (ret != 0) {
+		pr_err("Failed to register IOMMU context driver\n");
+		goto error;
+	}
+
+error:
+	return ret;
+}
+
+static void msm_iommu_driver_exit(void)
+{
+	platform_driver_unregister(&msm_iommu_ctx_driver);
+	platform_driver_unregister(&msm_iommu_driver);
+}
+
+subsys_initcall(msm_iommu_driver_init);
+module_exit(msm_iommu_driver_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Stepan Moskovchenko <stepanm@codeaurora.org>");
diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
index dec5ca622d7..7689848ec68 100644
--- a/arch/arm/mach-msm/timer.c
+++ b/arch/arm/mach-msm/timer.c
@@ -28,7 +28,6 @@
 #ifndef MSM_DGT_BASE
 #define MSM_DGT_BASE (MSM_GPT_BASE + 0x10)
 #endif
-#define MSM_DGT_SHIFT (5)
 
 #define TIMER_MATCH_VAL         0x0000
 #define TIMER_COUNT_VAL         0x0004
@@ -36,12 +35,28 @@
 #define TIMER_ENABLE_CLR_ON_MATCH_EN    2
 #define TIMER_ENABLE_EN                 1
 #define TIMER_CLEAR             0x000C
-
+#define DGT_CLK_CTL             0x0034
+enum {
+	DGT_CLK_CTL_DIV_1 = 0,
+	DGT_CLK_CTL_DIV_2 = 1,
+	DGT_CLK_CTL_DIV_3 = 2,
+	DGT_CLK_CTL_DIV_4 = 3,
+};
 #define CSR_PROTECTION          0x0020
 #define CSR_PROTECTION_EN               1
 
 #define GPT_HZ 32768
+
+#if defined(CONFIG_ARCH_QSD8X50)
+#define DGT_HZ (19200000 / 4) /* 19.2 MHz / 4 by default */
+#define MSM_DGT_SHIFT (0)
+#elif defined(CONFIG_ARCH_MSM7X30) || defined(CONFIG_ARCH_MSM8X60)
+#define DGT_HZ (24576000 / 4) /* 24.576 MHz (LPXO) / 4 by default */
+#define MSM_DGT_SHIFT (0)
+#else
 #define DGT_HZ 19200000 /* 19.2 MHz or 600 KHz after shift */
+#define MSM_DGT_SHIFT (5)
+#endif
 
 struct msm_clock {
 	struct clock_event_device   clockevent;
@@ -170,6 +185,10 @@ static void __init msm_timer_init(void)
 	int i;
 	int res;
 
+#ifdef CONFIG_ARCH_MSM8X60
+	writel(DGT_CLK_CTL_DIV_4, MSM_TMR_BASE + DGT_CLK_CTL);
+#endif
+
 	for (i = 0; i < ARRAY_SIZE(msm_clocks); i++) {
 		struct msm_clock *clock = &msm_clocks[i];
 		struct clock_event_device *ce = &clock->clockevent;
diff --git a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
index 61e5e583603..29e390e89ff 100644
--- a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
+++ b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
@@ -145,8 +145,6 @@ subsys_initcall(wxl_pci_init);
 
 MACHINE_START(TERASTATION_WXL, "Buffalo Nas WXL")
 	/* Maintainer: Sebastien Requiem <sebastien@requiem.fr> */
-	.phys_io	= MV78XX0_REGS_PHYS_BASE,
-	.io_pg_offst	= ((MV78XX0_REGS_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.init_machine	= wxl_init,
 	.map_io		= mv78xx0_map_io,
diff --git a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
index efdabe04c69..207c95e403b 100644
--- a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
+++ b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
@@ -93,8 +93,6 @@ subsys_initcall(db78x00_pci_init);
 
 MACHINE_START(DB78X00_BP, "Marvell DB-78x00-BP Development Board")
 	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-	.phys_io	= MV78XX0_REGS_PHYS_BASE,
-	.io_pg_offst	= ((MV78XX0_REGS_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.init_machine	= db78x00_init,
 	.map_io		= mv78xx0_map_io,
diff --git a/arch/arm/mach-mv78xx0/include/mach/debug-macro.S b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
index cd81689c462..04891428e48 100644
--- a/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
+++ b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
@@ -8,12 +8,11 @@
 
 #include <mach/mv78xx0.h>
 
-	.macro	addruart, rx, tmp
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1					@ MMU enabled?
-	ldreq	\rx, =MV78XX0_REGS_PHYS_BASE
-	ldrne	\rx, =MV78XX0_REGS_VIRT_BASE
-	orr	\rx, \rx, #0x00012000
+	.macro	addruart, rp, rv
+	ldr	\rp, =MV78XX0_REGS_PHYS_BASE
+	ldr	\rv, =MV78XX0_REGS_VIRT_BASE
+	orr	\rp, \rp, #0x00012000
+	orr	\rv, \rv, #0x00012000
 	.endm
 
 #define UART_SHIFT	2
diff --git a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
index e136b7a0335..3511ad4d973 100644
--- a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
+++ b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
@@ -78,8 +78,6 @@ subsys_initcall(rd78x00_pci_init);
 
 MACHINE_START(RD78X00_MASA, "Marvell RD-78x00-MASA Development Board")
 	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-	.phys_io	= MV78XX0_REGS_PHYS_BASE,
-	.io_pg_offst	= ((MV78XX0_REGS_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.init_machine	= rd78x00_masa_init,
 	.map_io		= mv78xx0_map_io,
diff --git a/arch/arm/mach-mx25/Kconfig b/arch/arm/mach-mx25/Kconfig
index c71a7bc1928..aa57e35ce3c 100644
--- a/arch/arm/mach-mx25/Kconfig
+++ b/arch/arm/mach-mx25/Kconfig
@@ -12,6 +12,8 @@ config MACH_EUKREA_CPUIMX25
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_FLEXCAN
+	select IMX_HAVE_PLATFORM_ESDHC
 	select MXC_ULPI if USB_ULPI
 
 choice
@@ -20,8 +22,8 @@ choice
 	default MACH_EUKREA_MBIMXSD25_BASEBOARD
 
 config MACH_EUKREA_MBIMXSD25_BASEBOARD
-	prompt "Eukrea MBIMXSD development board"
-	bool
+	bool "Eukrea MBIMXSD development board"
+	select IMX_HAVE_PLATFORM_IMX_SSI
 	help
 	  This adds board specific devices that can be found on Eukrea's
 	  MBIMXSD evaluation board.
diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-mx25/clock.c
index 40c7cc41cee..9e4a5578c2f 100644
--- a/arch/arm/mach-mx25/clock.c
+++ b/arch/arm/mach-mx25/clock.c
@@ -72,7 +72,7 @@ unsigned long get_rate_arm(struct clk *clk)
 	unsigned long rate = get_rate_mpll();
 
 	if (cctl & (1 << 14))
-		rate = (rate * 3) >> 1;
+		rate = (rate * 3) >> 2;
 
 	return rate / ((cctl >> 30) + 1);
 }
@@ -99,7 +99,7 @@ static unsigned long get_rate_per(int per)
 	if (readl(CRM_BASE + 0x64) & (1 << per))
 		fref = get_rate_upll();
 	else
-		fref = get_rate_ipg(NULL);
+		fref = get_rate_ahb(NULL);
 
 	return fref / (val + 1);
 }
@@ -139,6 +139,16 @@ static unsigned long get_rate_lcdc(struct clk *clk)
 	return get_rate_per(7);
 }
 
+static unsigned long get_rate_esdhc1(struct clk *clk)
+{
+	return get_rate_per(3);
+}
+
+static unsigned long get_rate_esdhc2(struct clk *clk)
+{
+	return get_rate_per(4);
+}
+
 static unsigned long get_rate_csi(struct clk *clk)
 {
 	return get_rate_per(0);
@@ -213,6 +223,12 @@ DEFINE_CLOCK(ssi2_per_clk, 0, CCM_CGCR0, 14, get_rate_ipg, NULL, NULL);
 DEFINE_CLOCK(cspi1_clk,  0, CCM_CGCR1,  5, get_rate_ipg, NULL, NULL);
 DEFINE_CLOCK(cspi2_clk,  0, CCM_CGCR1,  6, get_rate_ipg, NULL, NULL);
 DEFINE_CLOCK(cspi3_clk,  0, CCM_CGCR1,  7, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(esdhc1_ahb_clk, 0, CCM_CGCR0, 21, get_rate_esdhc1,	 NULL, NULL);
+DEFINE_CLOCK(esdhc1_per_clk, 0, CCM_CGCR0,  3, get_rate_esdhc1,	 NULL,
+		&esdhc1_ahb_clk);
+DEFINE_CLOCK(esdhc2_ahb_clk, 0, CCM_CGCR0, 22, get_rate_esdhc2,	 NULL, NULL);
+DEFINE_CLOCK(esdhc2_per_clk, 0, CCM_CGCR0,  4, get_rate_esdhc2,	 NULL,
+		&esdhc2_ahb_clk);
 DEFINE_CLOCK(fec_ahb_clk, 0, CCM_CGCR0, 23, NULL,	 NULL, NULL);
 DEFINE_CLOCK(lcdc_ahb_clk, 0, CCM_CGCR0, 24, NULL,	 NULL, NULL);
 DEFINE_CLOCK(lcdc_per_clk, 0, CCM_CGCR0,  7, NULL,	 NULL, &lcdc_ahb_clk);
@@ -238,10 +254,14 @@ DEFINE_CLOCK(lcdc_clk,	 0, CCM_CGCR1, 29, get_rate_lcdc, NULL, &lcdc_per_clk);
 DEFINE_CLOCK(wdt_clk,    0, CCM_CGCR2, 19, get_rate_ipg, NULL,  NULL);
 DEFINE_CLOCK(ssi1_clk,  0, CCM_CGCR2, 11, get_rate_ssi1, NULL, &ssi1_per_clk);
 DEFINE_CLOCK(ssi2_clk,  1, CCM_CGCR2, 12, get_rate_ssi2, NULL, &ssi2_per_clk);
+DEFINE_CLOCK(esdhc1_clk,  0, CCM_CGCR1, 13, get_rate_esdhc1, NULL,
+		&esdhc1_per_clk);
+DEFINE_CLOCK(esdhc2_clk,  1, CCM_CGCR1, 14, get_rate_esdhc2, NULL,
+		&esdhc2_per_clk);
 DEFINE_CLOCK(audmux_clk, 0, CCM_CGCR1, 0, NULL, NULL, NULL);
 DEFINE_CLOCK(csi_clk,    0, CCM_CGCR1,  4, get_rate_csi, NULL,  &csi_per_clk);
 DEFINE_CLOCK(can1_clk,	 0, CCM_CGCR1,  2, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(can2_clk,	 0, CCM_CGCR1,  3, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(can2_clk,	 1, CCM_CGCR1,  3, get_rate_ipg, NULL, NULL);
 
 #define _REGISTER_CLOCK(d, n, c)	\
 	{				\
@@ -261,9 +281,9 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
 	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk)
 	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
-	_REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
-	_REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
-	_REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
+	_REGISTER_CLOCK("imx25-cspi.0", NULL, cspi1_clk)
+	_REGISTER_CLOCK("imx25-cspi.1", NULL, cspi2_clk)
+	_REGISTER_CLOCK("imx25-cspi.2", NULL, cspi3_clk)
 	_REGISTER_CLOCK("mxc_pwm.0", NULL, pwm1_clk)
 	_REGISTER_CLOCK("mxc_pwm.1", NULL, pwm2_clk)
 	_REGISTER_CLOCK("mxc_pwm.2", NULL, pwm3_clk)
@@ -279,6 +299,8 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("imx-wdt.0", NULL, wdt_clk)
 	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
 	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
+	_REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk)
+	_REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_clk)
 	_REGISTER_CLOCK("mx2-camera.0", NULL, csi_clk)
 	_REGISTER_CLOCK(NULL, "audmux", audmux_clk)
 	_REGISTER_CLOCK("flexcan.0", NULL, can1_clk)
diff --git a/arch/arm/mach-mx25/devices-imx25.h b/arch/arm/mach-mx25/devices-imx25.h
index d86a7c3ca8b..93afa10b13c 100644
--- a/arch/arm/mach-mx25/devices-imx25.h
+++ b/arch/arm/mach-mx25/devices-imx25.h
@@ -9,35 +9,46 @@
 #include <mach/mx25.h>
 #include <mach/devices-common.h>
 
+extern const struct imx_fec_data imx25_fec_data __initconst;
+#define imx25_add_fec(pdata)	\
+	imx_add_fec(&imx25_fec_data, pdata)
+
 #define imx25_add_flexcan0(pdata)	\
 	imx_add_flexcan(0, MX25_CAN1_BASE_ADDR, SZ_16K, MX25_INT_CAN1, pdata)
 #define imx25_add_flexcan1(pdata)	\
 	imx_add_flexcan(1, MX25_CAN2_BASE_ADDR, SZ_16K, MX25_INT_CAN2, pdata)
 
-#define imx25_add_imx_i2c0(pdata)	\
-	imx_add_imx_i2c(0, MX25_I2C1_BASE_ADDR, SZ_16K, MX25_INT_I2C1, pdata)
-#define imx25_add_imx_i2c1(pdata)	\
-	imx_add_imx_i2c(1, MX25_I2C2_BASE_ADDR, SZ_16K, MX25_INT_I2C2, pdata)
-#define imx25_add_imx_i2c2(pdata)	\
-	imx_add_imx_i2c(2, MX25_I2C3_BASE_ADDR, SZ_16K, MX25_INT_I2C3, pdata)
-
-#define imx25_add_imx_uart0(pdata)	\
-	imx_add_imx_uart_1irq(0, MX25_UART1_BASE_ADDR, SZ_16K, MX25_INT_UART1, pdata)
-#define imx25_add_imx_uart1(pdata)	\
-	imx_add_imx_uart_1irq(1, MX25_UART2_BASE_ADDR, SZ_16K, MX25_INT_UART2, pdata)
-#define imx25_add_imx_uart2(pdata)	\
-	imx_add_imx_uart_1irq(2, MX25_UART3_BASE_ADDR, SZ_16K, MX25_INT_UART3, pdata)
-#define imx25_add_imx_uart3(pdata)	\
-	imx_add_imx_uart_1irq(3, MX25_UART4_BASE_ADDR, SZ_16K, MX25_INT_UART4, pdata)
-#define imx25_add_imx_uart4(pdata)	\
-	imx_add_imx_uart_1irq(4, MX25_UART5_BASE_ADDR, SZ_16K, MX25_INT_UART5, pdata)
+extern const struct imx_imx_i2c_data imx25_imx_i2c_data[] __initconst;
+#define imx25_add_imx_i2c(id, pdata)	\
+	imx_add_imx_i2c(&imx25_imx_i2c_data[id], pdata)
+#define imx25_add_imx_i2c0(pdata)	imx25_add_imx_i2c(0, pdata)
+#define imx25_add_imx_i2c1(pdata)	imx25_add_imx_i2c(1, pdata)
+#define imx25_add_imx_i2c2(pdata)	imx25_add_imx_i2c(2, pdata)
+
+extern const struct imx_imx_ssi_data imx25_imx_ssi_data[] __initconst;
+#define imx25_add_imx_ssi(id, pdata)	\
+	imx_add_imx_ssi(&imx25_imx_ssi_data[id], pdata)
+
+extern const struct imx_imx_uart_1irq_data imx25_imx_uart_data[] __initconst;
+#define imx25_add_imx_uart(id, pdata)	\
+	imx_add_imx_uart_1irq(&imx25_imx_uart_data[id], pdata)
+#define imx25_add_imx_uart0(pdata)	imx25_add_imx_uart(0, pdata)
+#define imx25_add_imx_uart1(pdata)	imx25_add_imx_uart(1, pdata)
+#define imx25_add_imx_uart2(pdata)	imx25_add_imx_uart(2, pdata)
+#define imx25_add_imx_uart3(pdata)	imx25_add_imx_uart(3, pdata)
+#define imx25_add_imx_uart4(pdata)	imx25_add_imx_uart(4, pdata)
 
+extern const struct imx_mxc_nand_data imx25_mxc_nand_data __initconst;
 #define imx25_add_mxc_nand(pdata)	\
-	imx_add_mxc_nand_v21(MX25_NFC_BASE_ADDR, MX25_INT_NANDFC, pdata)
-
-#define imx25_add_spi_imx0(pdata)	\
-	imx_add_spi_imx(0, MX25_CSPI1_BASE_ADDR, SZ_16K, MX25_INT_CSPI1, pdata)
-#define imx25_add_spi_imx1(pdata)	\
-	imx_add_spi_imx(1, MX25_CSPI2_BASE_ADDR, SZ_16K, MX25_INT_CSPI2, pdata)
-#define imx25_add_spi_imx2(pdata)	\
-	imx_add_spi_imx(2, MX25_CSPI3_BASE_ADDR, SZ_16K, MX25_INT_CSPI3, pdata)
+	imx_add_mxc_nand(&imx25_mxc_nand_data, pdata)
+
+extern const struct imx_spi_imx_data imx25_spi_imx_data[] __initconst;
+#define imx25_add_spi_imx(id, pdata)	\
+	imx_add_spi_imx(&imx25_spi_imx_data[id], pdata)
+#define imx25_add_spi_imx0(pdata)	imx25_add_spi_imx(0, pdata)
+#define imx25_add_spi_imx1(pdata)	imx25_add_spi_imx(1, pdata)
+#define imx25_add_spi_imx2(pdata)	imx25_add_spi_imx(2, pdata)
+
+extern const struct imx_esdhc_imx_data imx25_esdhc_data[] __initconst;
+#define imx25_add_esdhc(id, pdata)	\
+	imx_add_esdhc(&imx25_esdhc_data[id], pdata)
diff --git a/arch/arm/mach-mx25/devices.c b/arch/arm/mach-mx25/devices.c
index 3468eb15b23..1d0eb3e8594 100644
--- a/arch/arm/mach-mx25/devices.c
+++ b/arch/arm/mach-mx25/devices.c
@@ -208,26 +208,6 @@ int __init imx25_register_gpios(void)
 	return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
 }
 
-static struct resource mx25_fec_resources[] = {
-	{
-		.start	= MX25_FEC_BASE_ADDR,
-		.end	= MX25_FEC_BASE_ADDR + 0xfff,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= MX25_INT_FEC,
-		.end	= MX25_INT_FEC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mx25_fec_device = {
-	.name	= "fec",
-	.id	= 0,
-	.num_resources	= ARRAY_SIZE(mx25_fec_resources),
-	.resource	= mx25_fec_resources,
-};
-
 static struct resource mx25_rtc_resources[] = {
 	{
 		.start	= MX25_DRYICE_BASE_ADDR,
@@ -305,44 +285,6 @@ struct platform_device mx25_kpp_device = {
 	.resource	= mx25_kpp_resources,
 };
 
-static struct resource imx_ssi_resources0[] = {
-	{
-		.start	= MX25_SSI1_BASE_ADDR,
-		.end	= MX25_SSI1_BASE_ADDR + 0x3fff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= MX25_INT_SSI1,
-		.end	= MX25_INT_SSI1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource imx_ssi_resources1[] = {
-	{
-		.start	= MX25_SSI2_BASE_ADDR,
-		.end	= MX25_SSI2_BASE_ADDR + 0x3fff,
-		.flags	= IORESOURCE_MEM
-	}, {
-		.start	= MX25_INT_SSI2,
-		.end	= MX25_INT_SSI2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device imx_ssi_device0 = {
-	.name = "imx-ssi",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(imx_ssi_resources0),
-	.resource = imx_ssi_resources0,
-};
-
-struct platform_device imx_ssi_device1 = {
-	.name = "imx-ssi",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(imx_ssi_resources1),
-	.resource = imx_ssi_resources1,
-};
-
 static struct resource mx25_csi_resources[] = {
 	{
 		.start	= MX25_CSI_BASE_ADDR,
diff --git a/arch/arm/mach-mx25/devices.h b/arch/arm/mach-mx25/devices.h
index 4aceb68e35a..7b70a43c3a4 100644
--- a/arch/arm/mach-mx25/devices.h
+++ b/arch/arm/mach-mx25/devices.h
@@ -6,11 +6,8 @@ extern struct platform_device mxc_pwm_device1;
 extern struct platform_device mxc_pwm_device2;
 extern struct platform_device mxc_pwm_device3;
 extern struct platform_device mxc_keypad_device;
-extern struct platform_device mx25_fec_device;
 extern struct platform_device mx25_rtc_device;
 extern struct platform_device mx25_fb_device;
 extern struct platform_device mxc_wdt;
 extern struct platform_device mx25_kpp_device;
-extern struct platform_device imx_ssi_device0;
-extern struct platform_device imx_ssi_device1;
 extern struct platform_device mx25_csi_device;
diff --git a/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c
index 4aaadc753d3..e765ac5d9a0 100644
--- a/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c
@@ -34,7 +34,6 @@
 #include <mach/mx25.h>
 #include <mach/imx-uart.h>
 #include <mach/imxfb.h>
-#include <mach/ssi.h>
 #include <mach/audmux.h>
 
 #include "devices-imx25.h"
@@ -90,6 +89,9 @@ static struct pad_desc eukrea_mbimxsd_pads[] = {
 	MX25_PAD_KPP_COL2__AUD5_TXC,
 	MX25_PAD_KPP_COL1__AUD5_RXD,
 	MX25_PAD_KPP_COL0__AUD5_TXD,
+	/* CAN */
+	MX25_PAD_GPIO_D__CAN2_RX,
+	MX25_PAD_GPIO_C__CAN2_TX,
 };
 
 #define GPIO_LED1	83
@@ -114,6 +116,38 @@ static struct imx_fb_videomode eukrea_mximxsd_modes[] = {
 		},
 		.bpp	= 16,
 		.pcr	= 0xCAD08B80,
+	}, {
+		.mode = {
+			.name		= "DVI-VGA",
+			.refresh	= 60,
+			.xres		= 640,
+			.yres		= 480,
+			.pixclock	= 32000,
+			.hsync_len	= 7,
+			.left_margin	= 100,
+			.right_margin	= 100,
+			.vsync_len	= 7,
+			.upper_margin	= 7,
+			.lower_margin	= 100,
+		},
+		.pcr		= 0xFA208B80,
+		.bpp		= 16,
+	}, {
+		.mode = {
+			.name		= "DVI-SVGA",
+			.refresh	= 60,
+			.xres		= 800,
+			.yres		= 600,
+			.pixclock	= 25000,
+			.hsync_len	= 7,
+			.left_margin	= 75,
+			.right_margin	= 75,
+			.vsync_len	= 7,
+			.upper_margin	= 7,
+			.lower_margin	= 75,
+		},
+		.pcr		= 0xFA208B80,
+		.bpp		= 16,
 	},
 };
 
@@ -205,7 +239,8 @@ static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = {
 	},
 };
 
-struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata = {
+static const
+struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = {
 	.flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
 };
 
@@ -239,7 +274,10 @@ void __init eukrea_mbimxsd25_baseboard_init(void)
 
 	imx25_add_imx_uart1(&uart_pdata);
 	mxc_register_device(&mx25_fb_device, &eukrea_mximxsd_fb_pdata);
-	mxc_register_device(&imx_ssi_device0, &eukrea_mbimxsd_ssi_pdata);
+	imx25_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
+
+	imx25_add_flexcan1(NULL);
+	imx25_add_esdhc(0, NULL);
 
 	gpio_request(GPIO_LED1, "LED1");
 	gpio_direction_output(GPIO_LED1, 1);
diff --git a/arch/arm/mach-mx25/mach-cpuimx25.c b/arch/arm/mach-mx25/mach-cpuimx25.c
index e064bb3d691..f6f9ad60c25 100644
--- a/arch/arm/mach-mx25/mach-cpuimx25.c
+++ b/arch/arm/mach-mx25/mach-cpuimx25.c
@@ -23,7 +23,6 @@
 #include <linux/clk.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
-#include <linux/fec.h>
 #include <linux/platform_device.h>
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
@@ -41,7 +40,6 @@
 #include <mach/mxc_nand.h>
 #include <mach/imxfb.h>
 #include <mach/mxc_ehci.h>
-#include <mach/ulpi.h>
 #include <mach/iomux-mx25.h>
 
 #include "devices-imx25.h"
@@ -67,7 +65,7 @@ static struct pad_desc eukrea_cpuimx25_pads[] = {
 	MX25_PAD_I2C1_DAT__I2C1_DAT,
 };
 
-static struct fec_platform_data mx25_fec_pdata = {
+static const struct fec_platform_data mx25_fec_pdata __initconst = {
 	.phy	= PHY_INTERFACE_MODE_RMII,
 };
 
@@ -129,24 +127,19 @@ static void __init eukrea_cpuimx25_init(void)
 	imx25_add_imx_uart0(&uart_pdata);
 	imx25_add_mxc_nand(&eukrea_cpuimx25_nand_board_info);
 	mxc_register_device(&mx25_rtc_device, NULL);
-	mxc_register_device(&mx25_fec_device, &mx25_fec_pdata);
+	imx25_add_fec(&mx25_fec_pdata);
 
 	i2c_register_board_info(0, eukrea_cpuimx25_i2c_devices,
 				ARRAY_SIZE(eukrea_cpuimx25_i2c_devices));
 	imx25_add_imx_i2c0(&eukrea_cpuimx25_i2c0_data);
 
-#if defined(CONFIG_USB_ULPI)
-	if (otg_mode_host) {
-		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
-
+	if (otg_mode_host)
 		mxc_register_device(&mxc_otg, &otg_pdata);
-	}
-	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
-#endif
-	if (!otg_mode_host)
+	else
 		mxc_register_device(&otg_udc_device, &otg_device_pdata);
 
+	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+
 #ifdef CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD
 	eukrea_mbimxsd25_baseboard_init();
 #endif
@@ -163,8 +156,6 @@ static struct sys_timer eukrea_cpuimx25_timer = {
 
 MACHINE_START(EUKREA_CPUIMX25, "Eukrea CPUIMX25")
 	/* Maintainer: Eukrea Electromatique */
-	.phys_io	= MX25_AIPS1_BASE_ADDR,
-	.io_pg_offst	= ((MX25_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = MX25_PHYS_OFFSET + 0x100,
 	.map_io         = mx25_map_io,
 	.init_irq       = mx25_init_irq,
diff --git a/arch/arm/mach-mx25/mach-mx25_3ds.c b/arch/arm/mach-mx25/mach-mx25_3ds.c
index 62bc21f11a7..80805107a73 100644
--- a/arch/arm/mach-mx25/mach-mx25_3ds.c
+++ b/arch/arm/mach-mx25/mach-mx25_3ds.c
@@ -28,7 +28,6 @@
 #include <linux/clk.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
-#include <linux/fec.h>
 #include <linux/platform_device.h>
 #include <linux/input/matrix_keypad.h>
 
@@ -99,7 +98,7 @@ static struct pad_desc mx25pdk_pads[] = {
 	MX25_PAD_KPP_COL3__KPP_COL3,
 };
 
-static struct fec_platform_data mx25_fec_pdata = {
+static const struct fec_platform_data mx25_fec_pdata __initconst = {
         .phy    = PHY_INTERFACE_MODE_RMII,
 };
 
@@ -192,7 +191,7 @@ static void __init mx25pdk_init(void)
 	mxc_register_device(&mxc_wdt, NULL);
 
 	mx25pdk_fec_reset();
-	mxc_register_device(&mx25_fec_device, &mx25_fec_pdata);
+	imx25_add_fec(&mx25_fec_pdata);
 	mxc_register_device(&mx25_kpp_device, &mx25pdk_keymap_data);
 }
 
@@ -207,8 +206,6 @@ static struct sys_timer mx25pdk_timer = {
 
 MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)")
 	/* Maintainer: Freescale Semiconductor, Inc. */
-	.phys_io	= MX25_AIPS1_BASE_ADDR,
-	.io_pg_offst	= ((MX25_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = MX25_PHYS_OFFSET + 0x100,
 	.map_io         = mx25_map_io,
 	.init_irq       = mx25_init_irq,
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index 85beece802a..096fd33f8ab 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -9,6 +9,7 @@ config ARCH_MX35
 	bool
 	select ARCH_MXC_IOMUX_V3
 	select ARCH_MXC_AUDMUX_V2
+	select HAVE_EPIT
 
 comment "MX3 platforms:"
 
@@ -16,6 +17,7 @@ config MACH_MX31ADS
 	bool "Support MX31ADS platforms"
 	select ARCH_MX31
 	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_SSI
 	select IMX_HAVE_PLATFORM_IMX_UART
 	default y
 	help
@@ -117,9 +119,11 @@ config MACH_PCM043
 	bool "Support Phytec pcm043 (i.MX35) platforms"
 	select ARCH_MX35
 	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_SSI
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_FLEXCAN
+	select IMX_HAVE_PLATFORM_ESDHC
 	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for Phytec pcm043 platform. This includes
@@ -140,6 +144,7 @@ config MACH_MX35_3DS
 	bool "Support MX35PDK platform"
 	select ARCH_MX35
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
 	default n
 	help
 	  Include support for MX35PDK platform. This includes specific
@@ -159,6 +164,8 @@ config MACH_EUKREA_CPUIMX35
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_FLEXCAN
+	select IMX_HAVE_PLATFORM_ESDHC
 	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for Eukrea CPUIMX35 platform. This includes
@@ -170,8 +177,8 @@ choice
 	default MACH_EUKREA_MBIMXSD35_BASEBOARD
 
 config MACH_EUKREA_MBIMXSD35_BASEBOARD
-	prompt "Eukrea MBIMXSD development board"
-	bool
+	bool "Eukrea MBIMXSD development board"
+	select IMX_HAVE_PLATFORM_IMX_SSI
 	help
 	  This adds board specific devices that can be found on Eukrea's
 	  MBIMXSD evaluation board.
diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
index 2bd7beceb99..8a182d0a3fc 100644
--- a/arch/arm/mach-mx3/Makefile
+++ b/arch/arm/mach-mx3/Makefile
@@ -7,7 +7,6 @@
 obj-y				:= mm.o devices.o cpu.o
 CFLAGS_mm.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
 CFLAGS_devices.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
-CFLAGS_cpu.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
 obj-$(CONFIG_ARCH_MX31)		+= clock-imx31.o iomux-imx31.o
 obj-$(CONFIG_ARCH_MX35)		+= clock-imx35.o
 obj-$(CONFIG_MACH_MX31ADS)	+= mach-mx31ads.o
diff --git a/arch/arm/mach-mx3/clock-imx31.c b/arch/arm/mach-mx3/clock-imx31.c
index 9a9eb6de612..109e98f323e 100644
--- a/arch/arm/mach-mx3/clock-imx31.c
+++ b/arch/arm/mach-mx3/clock-imx31.c
@@ -477,7 +477,7 @@ DEFINE_CLOCK(epit1_clk,   0, MXC_CCM_CGR0,  6, NULL, NULL, &perclk_clk);
 DEFINE_CLOCK(epit2_clk,   1, MXC_CCM_CGR0,  8, NULL, NULL, &perclk_clk);
 DEFINE_CLOCK(iim_clk,     0, MXC_CCM_CGR0, 10, NULL, NULL, &ipg_clk);
 DEFINE_CLOCK(ata_clk,     0, MXC_CCM_CGR0, 12, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(sdma_clk1,   0, MXC_CCM_CGR0, 14, NULL, &sdma_clk1, &ahb_clk);
+DEFINE_CLOCK(sdma_clk1,   0, MXC_CCM_CGR0, 14, NULL, NULL, &ahb_clk);
 DEFINE_CLOCK(cspi3_clk,   2, MXC_CCM_CGR0, 16, NULL, NULL, &ipg_clk);
 DEFINE_CLOCK(rng_clk,     0, MXC_CCM_CGR0, 18, NULL, NULL, &ipg_clk);
 DEFINE_CLOCK(uart1_clk,   0, MXC_CCM_CGR0, 20, NULL, NULL, &perclk_clk);
@@ -525,9 +525,9 @@ DEFINE_CLOCK(ipg_clk,     0, NULL,          0, ipg_get_rate, NULL, &ahb_clk);
 
 static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "emi", emi_clk)
-	_REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
-	_REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
-	_REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
+	_REGISTER_CLOCK("imx31-cspi.0", NULL, cspi1_clk)
+	_REGISTER_CLOCK("imx31-cspi.1", NULL, cspi2_clk)
+	_REGISTER_CLOCK("imx31-cspi.2", NULL, cspi3_clk)
 	_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
 	_REGISTER_CLOCK(NULL, "pwm", pwm_clk)
 	_REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
@@ -564,7 +564,7 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "ata", ata_clk)
 	_REGISTER_CLOCK(NULL, "rtic", rtic_clk)
 	_REGISTER_CLOCK(NULL, "rng", rng_clk)
-	_REGISTER_CLOCK(NULL, "sdma_ahb", sdma_clk1)
+	_REGISTER_CLOCK("imx-sdma", NULL, sdma_clk1)
 	_REGISTER_CLOCK(NULL, "sdma_ipg", sdma_clk2)
 	_REGISTER_CLOCK(NULL, "mstick", mstick1_clk)
 	_REGISTER_CLOCK(NULL, "mstick", mstick2_clk)
diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index 7a62e744a8b..61e4a318980 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -364,8 +364,8 @@ DEFINE_CLOCK(cspi2_clk,  1, CCM_CGR0, 12, get_rate_ipg, NULL);
 DEFINE_CLOCK(ect_clk,    0, CCM_CGR0, 14, get_rate_ipg, NULL);
 DEFINE_CLOCK(edio_clk,   0, CCM_CGR0, 16, NULL, NULL);
 DEFINE_CLOCK(emi_clk,    0, CCM_CGR0, 18, get_rate_ipg, NULL);
-DEFINE_CLOCK(epit1_clk,  0, CCM_CGR0, 20, get_rate_ipg_per, NULL);
-DEFINE_CLOCK(epit2_clk,  1, CCM_CGR0, 22, get_rate_ipg_per, NULL);
+DEFINE_CLOCK(epit1_clk,  0, CCM_CGR0, 20, get_rate_ipg, NULL);
+DEFINE_CLOCK(epit2_clk,  1, CCM_CGR0, 22, get_rate_ipg, NULL);
 DEFINE_CLOCK(esai_clk,   0, CCM_CGR0, 24, NULL, NULL);
 DEFINE_CLOCK(esdhc1_clk, 0, CCM_CGR0, 26, get_rate_sdhc, NULL);
 DEFINE_CLOCK(esdhc2_clk, 1, CCM_CGR0, 28, get_rate_sdhc, NULL);
@@ -451,17 +451,17 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "ata", ata_clk)
 	_REGISTER_CLOCK("flexcan.0", NULL, can1_clk)
 	_REGISTER_CLOCK("flexcan.1", NULL, can2_clk)
-	_REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
-	_REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
+	_REGISTER_CLOCK("imx35-cspi.0", NULL, cspi1_clk)
+	_REGISTER_CLOCK("imx35-cspi.1", NULL, cspi2_clk)
 	_REGISTER_CLOCK(NULL, "ect", ect_clk)
 	_REGISTER_CLOCK(NULL, "edio", edio_clk)
 	_REGISTER_CLOCK(NULL, "emi", emi_clk)
-	_REGISTER_CLOCK(NULL, "epit", epit1_clk)
-	_REGISTER_CLOCK(NULL, "epit", epit2_clk)
+	_REGISTER_CLOCK("imx-epit.0", NULL, epit1_clk)
+	_REGISTER_CLOCK("imx-epit.1", NULL, epit2_clk)
 	_REGISTER_CLOCK(NULL, "esai", esai_clk)
-	_REGISTER_CLOCK(NULL, "sdhc", esdhc1_clk)
-	_REGISTER_CLOCK(NULL, "sdhc", esdhc2_clk)
-	_REGISTER_CLOCK(NULL, "sdhc", esdhc3_clk)
+	_REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk)
+	_REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_clk)
+	_REGISTER_CLOCK("sdhci-esdhc-imx.2", NULL, esdhc3_clk)
 	_REGISTER_CLOCK("fec.0", NULL, fec_clk)
 	_REGISTER_CLOCK(NULL, "gpio", gpio1_clk)
 	_REGISTER_CLOCK(NULL, "gpio", gpio2_clk)
@@ -482,7 +482,7 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
 	_REGISTER_CLOCK(NULL, "rtic", rtic_clk)
 	_REGISTER_CLOCK(NULL, "scc", scc_clk)
-	_REGISTER_CLOCK(NULL, "sdma", sdma_clk)
+	_REGISTER_CLOCK("imx-sdma", NULL, sdma_clk)
 	_REGISTER_CLOCK(NULL, "spba", spba_clk)
 	_REGISTER_CLOCK(NULL, "spdif", spdif_clk)
 	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
@@ -535,8 +535,16 @@ int __init mx35_clocks_init()
 	__raw_writel(cgr2, CCM_BASE + CCM_CGR2);
 	__raw_writel(cgr3, CCM_BASE + CCM_CGR3);
 
+	clk_enable(&iim_clk);
+	mx35_read_cpu_rev();
+
+#ifdef CONFIG_MXC_USE_EPIT
+	epit_timer_init(&epit1_clk,
+			MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1);
+#else
 	mxc_timer_init(&gpt_clk,
 			MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT);
+#endif
 
 	return 0;
 }
diff --git a/arch/arm/mach-mx3/cpu.c b/arch/arm/mach-mx3/cpu.c
index 861afe0fe3a..d00a7545781 100644
--- a/arch/arm/mach-mx3/cpu.c
+++ b/arch/arm/mach-mx3/cpu.c
@@ -25,15 +25,15 @@ struct mx3_cpu_type {
 };
 
 static struct mx3_cpu_type mx31_cpu_type[] __initdata = {
-	{ .srev = 0x00, .name = "i.MX31(L)", .v = "1.0",  .rev = CHIP_REV_1_0	},
-	{ .srev = 0x10, .name = "i.MX31",    .v = "1.1",  .rev = CHIP_REV_1_1	},
-	{ .srev = 0x11, .name = "i.MX31L",   .v = "1.1",  .rev = CHIP_REV_1_1	},
-	{ .srev = 0x12, .name = "i.MX31",    .v = "1.15", .rev = CHIP_REV_1_1	},
-	{ .srev = 0x13, .name = "i.MX31L",   .v = "1.15", .rev = CHIP_REV_1_1	},
-	{ .srev = 0x14, .name = "i.MX31",    .v = "1.2",  .rev = CHIP_REV_1_2	},
-	{ .srev = 0x15, .name = "i.MX31L",   .v = "1.2",  .rev = CHIP_REV_1_2	},
-	{ .srev = 0x28, .name = "i.MX31",    .v = "2.0",  .rev = CHIP_REV_2_0	},
-	{ .srev = 0x29, .name = "i.MX31L",   .v = "2.0",  .rev = CHIP_REV_2_0	},
+	{ .srev = 0x00, .name = "i.MX31(L)", .v = "1.0",  .rev = MX3x_CHIP_REV_1_0 },
+	{ .srev = 0x10, .name = "i.MX31",    .v = "1.1",  .rev = MX3x_CHIP_REV_1_1 },
+	{ .srev = 0x11, .name = "i.MX31L",   .v = "1.1",  .rev = MX3x_CHIP_REV_1_1 },
+	{ .srev = 0x12, .name = "i.MX31",    .v = "1.15", .rev = MX3x_CHIP_REV_1_1 },
+	{ .srev = 0x13, .name = "i.MX31L",   .v = "1.15", .rev = MX3x_CHIP_REV_1_1 },
+	{ .srev = 0x14, .name = "i.MX31",    .v = "1.2",  .rev = MX3x_CHIP_REV_1_2 },
+	{ .srev = 0x15, .name = "i.MX31L",   .v = "1.2",  .rev = MX3x_CHIP_REV_1_2 },
+	{ .srev = 0x28, .name = "i.MX31",    .v = "2.0",  .rev = MX3x_CHIP_REV_2_0 },
+	{ .srev = 0x29, .name = "i.MX31L",   .v = "2.0",  .rev = MX3x_CHIP_REV_2_0 },
 };
 
 void __init mx31_read_cpu_rev(void)
@@ -41,7 +41,7 @@ void __init mx31_read_cpu_rev(void)
 	u32 i, srev;
 
 	/* read SREV register from IIM module */
-	srev = __raw_readl(IO_ADDRESS(IIM_BASE_ADDR + MXC_IIMSREV));
+	srev = __raw_readl(MX31_IO_ADDRESS(MX31_IIM_BASE_ADDR + MXC_IIMSREV));
 
 	for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++)
 		if (srev == mx31_cpu_type[i].srev) {
@@ -55,3 +55,30 @@ void __init mx31_read_cpu_rev(void)
 
 	printk(KERN_WARNING "Unknown CPU identifier. srev = %02x\n", srev);
 }
+
+unsigned int mx35_cpu_rev;
+EXPORT_SYMBOL(mx35_cpu_rev);
+
+void __init mx35_read_cpu_rev(void)
+{
+	u32 rev;
+	char *srev = "unknown";
+
+	rev = __raw_readl(MX35_IO_ADDRESS(MX35_IIM_BASE_ADDR + MXC_IIMSREV));
+	switch (rev) {
+	case 0x00:
+		mx35_cpu_rev = MX3x_CHIP_REV_1_0;
+		srev = "1.0";
+		break;
+	case 0x10:
+		mx35_cpu_rev = MX3x_CHIP_REV_2_0;
+		srev = "2.0";
+		break;
+	case 0x11:
+		mx35_cpu_rev = MX3x_CHIP_REV_2_1;
+		srev = "2.1";
+		break;
+	}
+
+	printk(KERN_INFO "CPU identified as i.MX35, silicon rev %s\n", srev);
+}
diff --git a/arch/arm/mach-mx3/devices-imx31.h b/arch/arm/mach-mx3/devices-imx31.h
index 3b1a44a2058..de9598590eb 100644
--- a/arch/arm/mach-mx3/devices-imx31.h
+++ b/arch/arm/mach-mx3/devices-imx31.h
@@ -9,30 +9,33 @@
 #include <mach/mx31.h>
 #include <mach/devices-common.h>
 
-#define imx31_add_imx_i2c0(pdata)	\
-	imx_add_imx_i2c(0, MX31_I2C1_BASE_ADDR, SZ_4K, MX31_INT_I2C1, pdata)
-#define imx31_add_imx_i2c1(pdata)	\
-	imx_add_imx_i2c(1, MX31_I2C2_BASE_ADDR, SZ_4K, MX31_INT_I2C2, pdata)
-#define imx31_add_imx_i2c2(pdata)	\
-	imx_add_imx_i2c(2, MX31_I2C3_BASE_ADDR, SZ_4K, MX31_INT_I2C3, pdata)
+extern const struct imx_imx_i2c_data imx31_imx_i2c_data[] __initconst;
+#define imx31_add_imx_i2c(id, pdata)	\
+	imx_add_imx_i2c(&imx31_imx_i2c_data[id], pdata)
+#define imx31_add_imx_i2c0(pdata)	imx31_add_imx_i2c(0, pdata)
+#define imx31_add_imx_i2c1(pdata)	imx31_add_imx_i2c(1, pdata)
+#define imx31_add_imx_i2c2(pdata)	imx31_add_imx_i2c(2, pdata)
 
-#define imx31_add_imx_uart0(pdata)	\
-	imx_add_imx_uart_1irq(0, MX31_UART1_BASE_ADDR, SZ_16K, MX31_INT_UART1, pdata)
-#define imx31_add_imx_uart1(pdata)	\
-	imx_add_imx_uart_1irq(1, MX31_UART2_BASE_ADDR, SZ_16K, MX31_INT_UART2, pdata)
-#define imx31_add_imx_uart2(pdata)	\
-	imx_add_imx_uart_1irq(2, MX31_UART3_BASE_ADDR, SZ_16K, MX31_INT_UART3, pdata)
-#define imx31_add_imx_uart3(pdata)	\
-	imx_add_imx_uart_1irq(3, MX31_UART4_BASE_ADDR, SZ_16K, MX31_INT_UART4, pdata)
-#define imx31_add_imx_uart4(pdata)	\
-	imx_add_imx_uart_1irq(4, MX31_UART5_BASE_ADDR, SZ_16K, MX31_INT_UART5, pdata)
+extern const struct imx_imx_ssi_data imx31_imx_ssi_data[] __initconst;
+#define imx31_add_imx_ssi(id, pdata)    \
+	imx_add_imx_ssi(&imx31_imx_ssi_data[id], pdata)
 
+extern const struct imx_imx_uart_1irq_data imx31_imx_uart_data[] __initconst;
+#define imx31_add_imx_uart(id, pdata)	\
+	imx_add_imx_uart_1irq(&imx31_imx_uart_data[id], pdata)
+#define imx31_add_imx_uart0(pdata)	imx31_add_imx_uart(0, pdata)
+#define imx31_add_imx_uart1(pdata)	imx31_add_imx_uart(1, pdata)
+#define imx31_add_imx_uart2(pdata)	imx31_add_imx_uart(2, pdata)
+#define imx31_add_imx_uart3(pdata)	imx31_add_imx_uart(3, pdata)
+#define imx31_add_imx_uart4(pdata)	imx31_add_imx_uart(4, pdata)
+
+extern const struct imx_mxc_nand_data imx31_mxc_nand_data __initconst;
 #define imx31_add_mxc_nand(pdata)	\
-	imx_add_mxc_nand_v1(MX31_NFC_BASE_ADDR, MX31_INT_NANDFC, pdata)
+	imx_add_mxc_nand(&imx31_mxc_nand_data, pdata)
 
-#define imx31_add_spi_imx0(pdata)	\
-	imx_add_spi_imx(0, MX31_CSPI1_BASE_ADDR, SZ_4K, MX31_INT_CSPI1, pdata)
-#define imx31_add_spi_imx1(pdata)	\
-	imx_add_spi_imx(1, MX31_CSPI2_BASE_ADDR, SZ_4K, MX31_INT_CSPI2, pdata)
-#define imx31_add_spi_imx2(pdata)	\
-	imx_add_spi_imx(2, MX31_CSPI3_BASE_ADDR, SZ_4K, MX31_INT_CSPI3, pdata)
+extern const struct imx_spi_imx_data imx31_cspi_data[] __initconst;
+#define imx31_add_cspi(id, pdata)	\
+	imx_add_spi_imx(&imx31_cspi_data[id], pdata)
+#define imx31_add_spi_imx0(pdata)	imx31_add_cspi(0, pdata)
+#define imx31_add_spi_imx1(pdata)	imx31_add_cspi(1, pdata)
+#define imx31_add_spi_imx2(pdata)	imx31_add_cspi(2, pdata)
diff --git a/arch/arm/mach-mx3/devices-imx35.h b/arch/arm/mach-mx3/devices-imx35.h
index f6a431a4c3d..5eb917b638d 100644
--- a/arch/arm/mach-mx3/devices-imx35.h
+++ b/arch/arm/mach-mx3/devices-imx35.h
@@ -9,29 +9,43 @@
 #include <mach/mx35.h>
 #include <mach/devices-common.h>
 
+extern const struct imx_fec_data imx35_fec_data __initconst;
+#define imx35_add_fec(pdata)	\
+	imx_add_fec(&imx35_fec_data, pdata)
+
 #define imx35_add_flexcan0(pdata)	\
 	imx_add_flexcan(0, MX35_CAN1_BASE_ADDR, SZ_16K, MX35_INT_CAN1, pdata)
 #define imx35_add_flexcan1(pdata)	\
 	imx_add_flexcan(1, MX35_CAN2_BASE_ADDR, SZ_16K, MX35_INT_CAN2, pdata)
 
-#define imx35_add_imx_i2c0(pdata)	\
-	imx_add_imx_i2c(0, MX35_I2C1_BASE_ADDR, SZ_4K, MX35_INT_I2C1, pdata)
-#define imx35_add_imx_i2c1(pdata)	\
-	imx_add_imx_i2c(1, MX35_I2C2_BASE_ADDR, SZ_4K, MX35_INT_I2C2, pdata)
-#define imx35_add_imx_i2c2(pdata)	\
-	imx_add_imx_i2c(2, MX35_I2C3_BASE_ADDR, SZ_4K, MX35_INT_I2C3, pdata)
+extern const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst;
+#define imx35_add_imx_i2c(id, pdata)	\
+	imx_add_imx_i2c(&imx35_imx_i2c_data[id], pdata)
+#define imx35_add_imx_i2c0(pdata)	imx35_add_imx_i2c(0, pdata)
+#define imx35_add_imx_i2c1(pdata)	imx35_add_imx_i2c(1, pdata)
+#define imx35_add_imx_i2c2(pdata)	imx35_add_imx_i2c(2, pdata)
+
+extern const struct imx_imx_ssi_data imx35_imx_ssi_data[] __initconst;
+#define imx35_add_imx_ssi(id, pdata)    \
+	imx_add_imx_ssi(&imx35_imx_ssi_data[id], pdata)
 
-#define imx35_add_imx_uart0(pdata)	\
-	imx_add_imx_uart_1irq(0, MX35_UART1_BASE_ADDR, SZ_16K, MX35_INT_UART1, pdata)
-#define imx35_add_imx_uart1(pdata)	\
-	imx_add_imx_uart_1irq(1, MX35_UART2_BASE_ADDR, SZ_16K, MX35_INT_UART2, pdata)
-#define imx35_add_imx_uart2(pdata)	\
-	imx_add_imx_uart_1irq(2, MX35_UART3_BASE_ADDR, SZ_16K, MX35_INT_UART3, pdata)
+extern const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst;
+#define imx35_add_imx_uart(id, pdata)	\
+	imx_add_imx_uart_1irq(&imx35_imx_uart_data[id], pdata)
+#define imx35_add_imx_uart0(pdata)	imx35_add_imx_uart(0, pdata)
+#define imx35_add_imx_uart1(pdata)	imx35_add_imx_uart(1, pdata)
+#define imx35_add_imx_uart2(pdata)	imx35_add_imx_uart(2, pdata)
 
+extern const struct imx_mxc_nand_data imx35_mxc_nand_data __initconst;
 #define imx35_add_mxc_nand(pdata)	\
-	imx_add_mxc_nand_v21(MX35_NFC_BASE_ADDR, MX35_INT_NANDFC, pdata)
+	imx_add_mxc_nand(&imx35_mxc_nand_data, pdata)
+
+extern const struct imx_spi_imx_data imx35_cspi_data[] __initconst;
+#define imx35_add_cspi(id, pdata)	\
+	imx_add_spi_imx(&imx35_cspi_data[id], pdata)
+#define imx35_add_spi_imx0(pdata)	imx35_add_cspi(0, pdata)
+#define imx35_add_spi_imx1(pdata)	imx35_add_cspi(1, pdata)
 
-#define imx35_add_spi_imx0(pdata)	\
-	imx_add_spi_imx(0, MX35_CSPI1_BASE_ADDR, SZ_4K, MX35_INT_CSPI1, pdata)
-#define imx35_add_spi_imx1(pdata)	\
-	imx_add_spi_imx(1, MX35_CSPI2_BASE_ADDR, SZ_4K, MX35_INT_CSPI2, pdata)
+extern const struct imx_esdhc_imx_data imx35_esdhc_data[] __initconst;
+#define imx35_add_esdhc(id, pdata)	\
+	imx_add_esdhc(&imx35_esdhc_data[id], pdata)
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index a4fd1a26fc9..f4dff11aaee 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -281,65 +281,6 @@ struct platform_device mxc_usbh2 = {
 	.num_resources = ARRAY_SIZE(mxc_usbh2_resources),
 };
 
-#if defined(CONFIG_ARCH_MX35)
-static struct resource mxc_fec_resources[] = {
-	{
-		.start	= MXC_FEC_BASE_ADDR,
-		.end	= MXC_FEC_BASE_ADDR + 0xfff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= MXC_INT_FEC,
-		.end	= MXC_INT_FEC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_fec_device = {
-	.name = "fec",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_fec_resources),
-	.resource = mxc_fec_resources,
-};
-#endif
-
-static struct resource imx_ssi_resources0[] = {
-	{
-		.start	= SSI1_BASE_ADDR,
-		.end	= SSI1_BASE_ADDR + 0xfff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= MX31_INT_SSI1,
-		.end	= MX31_INT_SSI1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource imx_ssi_resources1[] = {
-	{
-		.start	= SSI2_BASE_ADDR,
-		.end	= SSI2_BASE_ADDR + 0xfff,
-		.flags	= IORESOURCE_MEM
-	}, {
-		.start	= MX31_INT_SSI2,
-		.end	= MX31_INT_SSI2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device imx_ssi_device0 = {
-	.name = "imx-ssi",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(imx_ssi_resources0),
-	.resource = imx_ssi_resources0,
-};
-
-struct platform_device imx_ssi_device1 = {
-	.name = "imx-ssi",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(imx_ssi_resources1),
-	.resource = imx_ssi_resources1,
-};
-
 static struct resource imx_wdt_resources[] = {
 	{
 		.flags = IORESOURCE_MEM,
@@ -410,10 +351,6 @@ static int __init mx3_devices_init(void)
 		mxc_usbh1_resources[0].end = MX35_OTG_BASE_ADDR + 0x5ff;
 		mxc_usbh1_resources[1].start = MXC_INT_USBHS;
 		mxc_usbh1_resources[1].end = MXC_INT_USBHS;
-		imx_ssi_resources0[1].start = MX35_INT_SSI1;
-		imx_ssi_resources0[1].end = MX35_INT_SSI1;
-		imx_ssi_resources1[1].start = MX35_INT_SSI2;
-		imx_ssi_resources1[1].end = MX35_INT_SSI2;
 		imx_wdt_resources[0].start = MX35_WDOG_BASE_ADDR;
 		imx_wdt_resources[0].end = MX35_WDOG_BASE_ADDR + 0x3fff;
 	}
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
index e5535234839..585f814473d 100644
--- a/arch/arm/mach-mx3/devices.h
+++ b/arch/arm/mach-mx3/devices.h
@@ -2,7 +2,6 @@ extern struct platform_device mxc_w1_master_device;
 extern struct platform_device mx3_ipu;
 extern struct platform_device mx3_fb;
 extern struct platform_device mx3_camera;
-extern struct platform_device mxc_fec_device;
 extern struct platform_device mxcsdhc_device0;
 extern struct platform_device mxcsdhc_device1;
 extern struct platform_device mxc_otg_udc_device;
@@ -10,9 +9,6 @@ extern struct platform_device mxc_otg_host;
 extern struct platform_device mxc_usbh1;
 extern struct platform_device mxc_usbh2;
 extern struct platform_device mxc_rnga_device;
-extern struct platform_device imx_ssi_device0;
-extern struct platform_device imx_ssi_device1;
-extern struct platform_device imx_ssi_device1;
 extern struct platform_device imx_wdt_device0;
 extern struct platform_device imx_rtc_device0;
 extern struct platform_device imx_kpp_device;
diff --git a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
index f8f15e3ac7a..1abc10d5292 100644
--- a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
@@ -43,14 +43,13 @@
 #include <mach/ipu.h>
 #include <mach/mx3fb.h>
 #include <mach/audmux.h>
-#include <mach/ssi.h>
 
 #include "devices-imx35.h"
 #include "devices.h"
 
 static const struct fb_videomode fb_modedb[] = {
 	{
-		.name		= "CMO_QVGA",
+		.name		= "CMO-QVGA",
 		.refresh	= 60,
 		.xres		= 320,
 		.yres		= 240,
@@ -65,6 +64,40 @@ static const struct fb_videomode fb_modedb[] = {
 		.vmode		= FB_VMODE_NONINTERLACED,
 		.flag		= 0,
 	},
+	{
+		.name		= "DVI-VGA",
+		.refresh	= 60,
+		.xres		= 640,
+		.yres		= 480,
+		.pixclock	= 32000,
+		.left_margin	= 100,
+		.right_margin	= 100,
+		.upper_margin	= 7,
+		.lower_margin	= 100,
+		.hsync_len	= 7,
+		.vsync_len	= 7,
+		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT |
+				  FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	},
+	{
+		.name		= "DVI-SVGA",
+		.refresh	= 60,
+		.xres		= 800,
+		.yres		= 600,
+		.pixclock	= 25000,
+		.left_margin	= 75,
+		.right_margin	= 75,
+		.upper_margin	= 7,
+		.lower_margin	= 75,
+		.hsync_len	= 7,
+		.vsync_len	= 7,
+		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT |
+				  FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	},
 };
 
 static struct ipu_platform_data mx3_ipu_data = {
@@ -73,7 +106,7 @@ static struct ipu_platform_data mx3_ipu_data = {
 
 static struct mx3fb_platform_data mx3fb_pdata = {
 	.dma_dev	= &mx3_ipu.dev,
-	.name		= "CMO_QVGA",
+	.name		= "CMO-QVGA",
 	.mode		= fb_modedb,
 	.num_modes	= ARRAY_SIZE(fb_modedb),
 };
@@ -120,6 +153,16 @@ static struct pad_desc eukrea_mbimxsd_pads[] = {
 	MX35_PAD_STXD4__AUDMUX_AUD4_TXD,
 	MX35_PAD_SRXD4__AUDMUX_AUD4_RXD,
 	MX35_PAD_SCK4__AUDMUX_AUD4_TXC,
+	/* CAN2 */
+	MX35_PAD_TX5_RX0__CAN2_TXCAN,
+	MX35_PAD_TX4_RX1__CAN2_RXCAN,
+	/* SDCARD */
+	MX35_PAD_SD1_CMD__ESDHC1_CMD,
+	MX35_PAD_SD1_CLK__ESDHC1_CLK,
+	MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
+	MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
+	MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
+	MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
 };
 
 #define GPIO_LED1	(2 * 32 + 29)
@@ -206,7 +249,8 @@ static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = {
 	},
 };
 
-struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata = {
+static const
+struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = {
 	.flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
 };
 
@@ -242,7 +286,10 @@ void __init eukrea_mbimxsd35_baseboard_init(void)
 	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
 	mxc_register_device(&mx3_fb, &mx3fb_pdata);
 
-	mxc_register_device(&imx_ssi_device0, &eukrea_mbimxsd_ssi_pdata);
+	imx35_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
+
+	imx35_add_flexcan1(NULL);
+	imx35_add_esdhc(0, NULL);
 
 	gpio_request(GPIO_LED1, "LED1");
 	gpio_direction_output(GPIO_LED1, 1);
@@ -254,7 +301,7 @@ void __init eukrea_mbimxsd35_baseboard_init(void)
 
 	gpio_request(GPIO_LCDPWR, "LCDPWR");
 	gpio_direction_output(GPIO_LCDPWR, 1);
-	gpio_free(GPIO_SWITCH1);
+	gpio_free(GPIO_LCDPWR);
 
 	i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
 				ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
diff --git a/arch/arm/mach-mx3/mach-armadillo5x0.c b/arch/arm/mach-mx3/mach-armadillo5x0.c
index 68879c996a5..aaa30fe18f8 100644
--- a/arch/arm/mach-mx3/mach-armadillo5x0.c
+++ b/arch/arm/mach-mx3/mach-armadillo5x0.c
@@ -571,8 +571,6 @@ static struct sys_timer armadillo5x0_timer = {
 
 MACHINE_START(ARMADILLO5X0, "Armadillo-500")
 	/* Maintainer: Alberto Panizzo  */
-	.phys_io	= MX31_AIPS1_BASE_ADDR,
-	.io_pg_offst	= (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
 	.boot_params	= MX3x_PHYS_OFFSET + 0x100,
 	.map_io		= mx31_map_io,
 	.init_irq	= mx31_init_irq,
diff --git a/arch/arm/mach-mx3/mach-cpuimx35.c b/arch/arm/mach-mx3/mach-cpuimx35.c
index 2a4f8b781ba..8533bf04284 100644
--- a/arch/arm/mach-mx3/mach-cpuimx35.c
+++ b/arch/arm/mach-mx3/mach-cpuimx35.c
@@ -31,6 +31,7 @@
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
 #include <linux/fsl_devices.h>
+#include <linux/i2c-gpio.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -43,7 +44,6 @@
 #include <mach/iomux-mx35.h>
 #include <mach/mxc_nand.h>
 #include <mach/mxc_ehci.h>
-#include <mach/ulpi.h>
 
 #include "devices-imx35.h"
 #include "devices.h"
@@ -53,39 +53,16 @@ static const struct imxuart_platform_data uart_pdata __initconst = {
 };
 
 static const struct imxi2c_platform_data
-eukrea_cpuimx35_i2c0_data __initconst = {
-	.bitrate = 50000,
+		eukrea_cpuimx35_i2c0_data __initconst = {
+	.bitrate =		100000,
 };
 
-#define TSC2007_IRQGPIO		(2 * 32 + 2)
-static int ts_get_pendown_state(void)
-{
-	int val = 0;
-	gpio_free(TSC2007_IRQGPIO);
-	gpio_request(TSC2007_IRQGPIO, NULL);
-	gpio_direction_input(TSC2007_IRQGPIO);
-
-	val = gpio_get_value(TSC2007_IRQGPIO);
-
-	gpio_free(TSC2007_IRQGPIO);
-	gpio_request(TSC2007_IRQGPIO, NULL);
-
-	return val ? 0 : 1;
-}
-
-static int ts_init(void)
-{
-	gpio_request(TSC2007_IRQGPIO, NULL);
-	return 0;
-}
-
 static struct tsc2007_platform_data tsc2007_info = {
 	.model			= 2007,
 	.x_plate_ohms		= 180,
-	.get_pendown_state	= ts_get_pendown_state,
-	.init_platform_hw	= ts_init,
 };
 
+#define TSC2007_IRQGPIO		(2 * 32 + 2)
 static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("pcf8563", 0x51),
@@ -98,7 +75,6 @@ static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = {
 };
 
 static struct platform_device *devices[] __initdata = {
-	&mxc_fec_device,
 	&imx_wdt_device0,
 };
 
@@ -135,18 +111,18 @@ static struct pad_desc eukrea_cpuimx35_pads[] = {
 };
 
 static const struct mxc_nand_platform_data
-eukrea_cpuimx35_nand_board_info __initconst = {
+		eukrea_cpuimx35_nand_board_info __initconst = {
 	.width		= 1,
 	.hw_ecc		= 1,
 	.flash_bbt	= 1,
 };
 
-static struct mxc_usbh_platform_data otg_pdata = {
+static struct mxc_usbh_platform_data __maybe_unused otg_pdata = {
 	.portsc	= MXC_EHCI_MODE_UTMI,
 	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
 
-static struct mxc_usbh_platform_data usbh1_pdata = {
+static struct mxc_usbh_platform_data __maybe_unused usbh1_pdata = {
 	.portsc	= MXC_EHCI_MODE_SERIAL,
 	.flags	= MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY |
 		  MXC_EHCI_IPPUE_DOWN,
@@ -180,6 +156,7 @@ static void __init mxc_board_init(void)
 	mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx35_pads,
 			ARRAY_SIZE(eukrea_cpuimx35_pads));
 
+	imx35_add_fec(NULL);
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	imx35_add_imx_uart0(&uart_pdata);
@@ -189,18 +166,13 @@ static void __init mxc_board_init(void)
 			ARRAY_SIZE(eukrea_cpuimx35_i2c_devices));
 	imx35_add_imx_i2c0(&eukrea_cpuimx35_i2c0_data);
 
-#if defined(CONFIG_USB_ULPI)
-	if (otg_mode_host) {
-		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
-
+	if (otg_mode_host)
 		mxc_register_device(&mxc_otg_host, &otg_pdata);
-	}
-	mxc_register_device(&mxc_usbh1, &usbh1_pdata);
-#endif
-	if (!otg_mode_host)
+	else
 		mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
 
+	mxc_register_device(&mxc_usbh1, &usbh1_pdata);
+
 #ifdef CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD
 	eukrea_mbimxsd35_baseboard_init();
 #endif
@@ -217,8 +189,6 @@ struct sys_timer eukrea_cpuimx35_timer = {
 
 MACHINE_START(EUKREA_CPUIMX35, "Eukrea CPUIMX35")
 	/* Maintainer: Eukrea Electromatique */
-	.phys_io	= MX35_AIPS1_BASE_ADDR,
-	.io_pg_offst	= ((MX35_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
 	.map_io         = mx35_map_io,
 	.init_irq       = mx35_init_irq,
diff --git a/arch/arm/mach-mx3/mach-kzm_arm11_01.c b/arch/arm/mach-mx3/mach-kzm_arm11_01.c
index 5b23e416d6c..042cd5655e1 100644
--- a/arch/arm/mach-mx3/mach-kzm_arm11_01.c
+++ b/arch/arm/mach-mx3/mach-kzm_arm11_01.c
@@ -274,8 +274,6 @@ static struct sys_timer kzm_timer = {
  * initialize __mach_desc_KZM_ARM11_01 data structure.
  */
 MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
-	.phys_io        = MX31_AIPS1_BASE_ADDR,
-	.io_pg_offst    = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
 	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
 	.map_io         = kzm_map_io,
 	.init_irq       = mx31_init_irq,
diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c
index 6fe69e124d3..5c1d0e86c91 100644
--- a/arch/arm/mach-mx3/mach-mx31_3ds.c
+++ b/arch/arm/mach-mx3/mach-mx31_3ds.c
@@ -301,8 +301,6 @@ static struct sys_timer mx31_3ds_timer = {
  */
 MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
 	/* Maintainer: Freescale Semiconductor, Inc. */
-	.phys_io	= MX31_AIPS1_BASE_ADDR,
-	.io_pg_offst	= (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
 	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
 	.map_io         = mx31_3ds_map_io,
 	.init_irq       = mx31_init_irq,
diff --git a/arch/arm/mach-mx3/mach-mx31ads.c b/arch/arm/mach-mx3/mach-mx31ads.c
index 94b3e7c4240..b993b9bf617 100644
--- a/arch/arm/mach-mx3/mach-mx31ads.c
+++ b/arch/arm/mach-mx3/mach-mx31ads.c
@@ -22,13 +22,13 @@
 #include <linux/i2c.h>
 #include <linux/irq.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/memory.h>
 #include <asm/mach/map.h>
 #include <mach/common.h>
+#include <mach/board-mx31ads.h>
 #include <mach/iomux-mx3.h>
 
 #ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
@@ -40,10 +40,6 @@
 #include "devices-imx31.h"
 #include "devices.h"
 
-/* Base address of PBC controller */
-#define PBC_BASE_ADDRESS        MX31_CS4_BASE_ADDR_VIRT
-/* Offsets for the PBC Controller register */
-
 /* PBC Board interrupt status register */
 #define PBC_INTSTATUS           0x000016
 
@@ -67,7 +63,6 @@
 #define PBC_INTMASK_CLEAR_REG	(PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS)
 #define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_4)
 
-#define MXC_EXP_IO_BASE		(MXC_BOARD_IRQ_START)
 #define MXC_IRQ_TO_EXPIO(irq)	((irq) - MXC_EXP_IO_BASE)
 
 #define EXPIO_INT_XUART_INTA	(MXC_EXP_IO_BASE + 10)
@@ -517,7 +512,7 @@ static unsigned int ssi_pins[] = {
 
 static void mxc_init_audio(void)
 {
-	mxc_register_device(&imx_ssi_device0, NULL);
+	imx31_add_imx_ssi(0, NULL);
 	mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi");
 }
 
@@ -574,8 +569,6 @@ static struct sys_timer mx31ads_timer = {
  */
 MACHINE_START(MX31ADS, "Freescale MX31ADS")
 	/* Maintainer: Freescale Semiconductor, Inc. */
-	.phys_io	= MX31_AIPS1_BASE_ADDR,
-	.io_pg_offst	= (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
 	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
 	.map_io         = mx31ads_map_io,
 	.init_irq       = mx31ads_init_irq,
diff --git a/arch/arm/mach-mx3/mach-mx31lilly.c b/arch/arm/mach-mx3/mach-mx31lilly.c
index 7c37daabb75..42f47faa6fd 100644
--- a/arch/arm/mach-mx3/mach-mx31lilly.c
+++ b/arch/arm/mach-mx3/mach-mx31lilly.c
@@ -348,8 +348,6 @@ static struct sys_timer mx31lilly_timer = {
 };
 
 MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
-	.phys_io	= MX31_AIPS1_BASE_ADDR,
-	.io_pg_offst	= (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
 	.boot_params	= MX3x_PHYS_OFFSET + 0x100,
 	.map_io		= mx31_map_io,
 	.init_irq	= mx31_init_irq,
diff --git a/arch/arm/mach-mx3/mach-mx31lite.c b/arch/arm/mach-mx3/mach-mx31lite.c
index f66a9576d8c..b93895814cd 100644
--- a/arch/arm/mach-mx3/mach-mx31lite.c
+++ b/arch/arm/mach-mx3/mach-mx31lite.c
@@ -282,8 +282,6 @@ struct sys_timer mx31lite_timer = {
 
 MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
 	/* Maintainer: Freescale Semiconductor, Inc. */
-	.phys_io        = MX31_AIPS1_BASE_ADDR,
-	.io_pg_offst    = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
 	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
 	.map_io         = mx31lite_map_io,
 	.init_irq       = mx31_init_irq,
diff --git a/arch/arm/mach-mx3/mach-mx31moboard.c b/arch/arm/mach-mx3/mach-mx31moboard.c
index 7a075e8bf2d..eb5f426df22 100644
--- a/arch/arm/mach-mx3/mach-mx31moboard.c
+++ b/arch/arm/mach-mx3/mach-mx31moboard.c
@@ -560,8 +560,6 @@ struct sys_timer mx31moboard_timer = {
 
 MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
 	/* Maintainer: Valentin Longchamp, EPFL Mobots group */
-	.phys_io	= MX31_AIPS1_BASE_ADDR,
-	.io_pg_offst	= (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
 	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
 	.map_io         = mx31_map_io,
 	.init_irq       = mx31_init_irq,
diff --git a/arch/arm/mach-mx3/mach-mx35_3ds.c b/arch/arm/mach-mx3/mach-mx35_3ds.c
index 1c30d7212f1..05f628d9072 100644
--- a/arch/arm/mach-mx3/mach-mx35_3ds.c
+++ b/arch/arm/mach-mx3/mach-mx35_3ds.c
@@ -1,5 +1,6 @@
 /*
  * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2009 Marc Kleine-Budde, Pengutronix
  *
  * Author: Fabio Estevam <fabio.estevam@freescale.com>
  *
@@ -27,6 +28,8 @@
 #include <linux/gpio.h>
 #include <linux/fsl_devices.h>
 
+#include <linux/mtd/physmap.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
@@ -35,6 +38,7 @@
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/iomux-mx35.h>
+#include <mach/mxc_ehci.h>
 
 #include "devices-imx35.h"
 #include "devices.h"
@@ -43,8 +47,34 @@ static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
+static struct physmap_flash_data mx35pdk_flash_data = {
+	.width  = 2,
+};
+
+static struct resource mx35pdk_flash_resource = {
+	.start	= MX35_CS0_BASE_ADDR,
+	.end	= MX35_CS0_BASE_ADDR + SZ_64M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device mx35pdk_flash = {
+	.name	= "physmap-flash",
+	.id	= 0,
+	.dev	= {
+		.platform_data  = &mx35pdk_flash_data,
+	},
+	.resource = &mx35pdk_flash_resource,
+	.num_resources = 1,
+};
+
+static const struct mxc_nand_platform_data mx35pdk_nand_board_info __initconst = {
+	.width = 1,
+	.hw_ecc = 1,
+	.flash_bbt = 1,
+};
+
 static struct platform_device *devices[] __initdata = {
-	&mxc_fec_device,
+	&mx35pdk_flash,
 };
 
 static struct pad_desc mx35pdk_pads[] = {
@@ -75,14 +105,24 @@ static struct pad_desc mx35pdk_pads[] = {
 	/* USBOTG */
 	MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR,
 	MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC,
+	/* USBH1 */
+	MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR,
+	MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC,
 };
 
 /* OTG config */
-static struct fsl_usb2_platform_data usb_pdata = {
+static struct fsl_usb2_platform_data usb_otg_pdata = {
 	.operating_mode	= FSL_USB2_DR_DEVICE,
 	.phy_mode	= FSL_USB2_PHY_UTMI_WIDE,
 };
 
+/* USB HOST config */
+static struct mxc_usbh_platform_data usb_host_pdata = {
+	.portsc		= MXC_EHCI_MODE_SERIAL,
+	.flags		= MXC_EHCI_INTERFACE_SINGLE_UNI |
+			  MXC_EHCI_INTERNAL_PHY,
+};
+
 /*
  * Board specific initialization.
  */
@@ -90,11 +130,16 @@ static void __init mxc_board_init(void)
 {
 	mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads));
 
+	imx35_add_fec(NULL);
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	imx35_add_imx_uart0(&uart_pdata);
 
-	mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
+	mxc_register_device(&mxc_otg_udc_device, &usb_otg_pdata);
+
+	mxc_register_device(&mxc_usbh1, &usb_host_pdata);
+
+	imx35_add_mxc_nand(&mx35pdk_nand_board_info);
 }
 
 static void __init mx35pdk_timer_init(void)
@@ -108,8 +153,6 @@ struct sys_timer mx35pdk_timer = {
 
 MACHINE_START(MX35_3DS, "Freescale MX35PDK")
 	/* Maintainer: Freescale Semiconductor, Inc */
-	.phys_io	= MX35_AIPS1_BASE_ADDR,
-	.io_pg_offst	= ((MX35_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
 	.map_io         = mx35_map_io,
 	.init_irq       = mx35_init_irq,
diff --git a/arch/arm/mach-mx3/mach-pcm037.c b/arch/arm/mach-mx3/mach-pcm037.c
index 214de11b20b..86e86c1300d 100644
--- a/arch/arm/mach-mx3/mach-pcm037.c
+++ b/arch/arm/mach-mx3/mach-pcm037.c
@@ -680,8 +680,6 @@ struct sys_timer pcm037_timer = {
 
 MACHINE_START(PCM037, "Phytec Phycore pcm037")
 	/* Maintainer: Pengutronix */
-	.phys_io	= MX31_AIPS1_BASE_ADDR,
-	.io_pg_offst	= (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
 	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
 	.map_io         = mx31_map_io,
 	.init_irq       = mx31_init_irq,
diff --git a/arch/arm/mach-mx3/mach-pcm037_eet.c b/arch/arm/mach-mx3/mach-pcm037_eet.c
index c8b98218efe..99e0894e07d 100644
--- a/arch/arm/mach-mx3/mach-pcm037_eet.c
+++ b/arch/arm/mach-mx3/mach-pcm037_eet.c
@@ -19,6 +19,7 @@
 
 #include "pcm037.h"
 #include "devices.h"
+#include "devices-imx31.h"
 
 static unsigned int pcm037_eet_pins[] = {
 	/* Reserve and hardwire GPIO 57 high - S6E63D6 chipselect */
@@ -181,7 +182,7 @@ static int eet_init_devices(void)
 	/* SPI */
 	spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev));
 #if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
-	imx35_add_spi_imx0(&pcm037_spi1_pdata);
+	imx31_add_spi_imx0(&pcm037_spi1_pdata);
 #endif
 
 	platform_device_register(&pcm037_gpio_keys_device);
diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c
index 28886f0e62f..4e1de87995d 100644
--- a/arch/arm/mach-mx3/mach-pcm043.c
+++ b/arch/arm/mach-mx3/mach-pcm043.c
@@ -42,7 +42,6 @@
 #include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
 #include <mach/audmux.h>
-#include <mach/ssi.h>
 
 #include "devices-imx35.h"
 #include "devices.h"
@@ -141,7 +140,6 @@ static struct i2c_board_info pcm043_i2c_devices[] = {
 
 static struct platform_device *devices[] __initdata = {
 	&pcm043_flash,
-	&mxc_fec_device,
 	&imx_wdt_device0,
 };
 
@@ -217,6 +215,13 @@ static struct pad_desc pcm043_pads[] = {
 	/* CAN2 */
 	MX35_PAD_TX5_RX0__CAN2_TXCAN,
 	MX35_PAD_TX4_RX1__CAN2_RXCAN,
+	/* esdhc */
+	MX35_PAD_SD1_CMD__ESDHC1_CMD,
+	MX35_PAD_SD1_CLK__ESDHC1_CLK,
+	MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
+	MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
+	MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
+	MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
 };
 
 #define AC97_GPIO_TXFS	(1 * 32 + 31)
@@ -293,7 +298,7 @@ err1:
 	mdelay(1);
 }
 
-static struct imx_ssi_platform_data pcm043_ssi_pdata = {
+static const struct imx_ssi_platform_data pcm043_ssi_pdata __initconst = {
 	.ac97_reset = pcm043_ac97_cold_reset,
 	.ac97_warm_reset = pcm043_ac97_warm_reset,
 	.flags = IMX_SSI_USE_AC97,
@@ -357,11 +362,12 @@ static void __init mxc_board_init(void)
 			MXC_AUDMUX_V2_PTCR_TCLKDIR, /* clock is output */
 			MXC_AUDMUX_V2_PDCR_RXDSEL(3));
 
+	imx35_add_fec(NULL);
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	imx35_add_imx_uart0(&uart_pdata);
 	imx35_add_mxc_nand(&pcm037_nand_board_info);
-	mxc_register_device(&imx_ssi_device0, &pcm043_ssi_pdata);
+	imx35_add_imx_ssi(0, &pcm043_ssi_pdata);
 
 	imx35_add_imx_uart1(&uart_pdata);
 
@@ -389,6 +395,7 @@ static void __init mxc_board_init(void)
 		mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
 
 	imx35_add_flexcan1(NULL);
+	imx35_add_esdhc(0, NULL);
 }
 
 static void __init pcm043_timer_init(void)
@@ -402,8 +409,6 @@ struct sys_timer pcm043_timer = {
 
 MACHINE_START(PCM043, "Phytec Phycore pcm043")
 	/* Maintainer: Pengutronix */
-	.phys_io	= MX35_AIPS1_BASE_ADDR,
-	.io_pg_offst	= ((MX35_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
 	.map_io         = mx35_map_io,
 	.init_irq       = mx35_init_irq,
diff --git a/arch/arm/mach-mx3/mach-qong.c b/arch/arm/mach-mx3/mach-qong.c
index c8c380eef74..fd1050c4096 100644
--- a/arch/arm/mach-mx3/mach-qong.c
+++ b/arch/arm/mach-mx3/mach-qong.c
@@ -270,8 +270,6 @@ static struct sys_timer qong_timer = {
 
 MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
 	/* Maintainer: DENX Software Engineering GmbH */
-	.phys_io        = MX31_AIPS1_BASE_ADDR,
-	.io_pg_offst    = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
 	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
 	.map_io         = mx31_map_io,
 	.init_irq       = mx31_init_irq,
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index 20e48c0195c..b4ffc531a82 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -110,6 +110,24 @@ void __init mx35_init_irq(void)
 static int mxc_init_l2x0(void)
 {
 	void __iomem *l2x0_base;
+	void __iomem *clkctl_base;
+/*
+ * First of all, we must repair broken chip settings. There are some
+ * i.MX35 CPUs in the wild, comming with bogus L2 cache settings. These
+ * misconfigured CPUs will run amok immediately when the L2 cache gets enabled.
+ * Workaraound is to setup the correct register setting prior enabling the
+ * L2 cache. This should not hurt already working CPUs, as they are using the
+ * same value
+ */
+#define L2_MEM_VAL 0x10
+
+	clkctl_base = ioremap(MX35_CLKCTL_BASE_ADDR, 4096);
+	if (clkctl_base != NULL) {
+		writel(0x00000515, clkctl_base + L2_MEM_VAL);
+		iounmap(clkctl_base);
+	} else {
+		pr_err("L2 cache: Cannot fix timing. Trying to continue without\n");
+	}
 
 	l2x0_base = ioremap(L2CC_BASE_ADDR, 4096);
 	if (IS_ERR(l2x0_base)) {
diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
index 0848db5dd36..a2df9ac3799 100644
--- a/arch/arm/mach-mx5/Kconfig
+++ b/arch/arm/mach-mx5/Kconfig
@@ -5,11 +5,14 @@ config ARCH_MX51
 	default y
 	select MXC_TZIC
 	select ARCH_MXC_IOMUX_V3
+	select ARCH_MXC_AUDMUX_V2
 
 comment "MX5 platforms:"
 
 config MACH_MX51_BABBAGE
 	bool "Support MX51 BABBAGE platforms"
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
 	help
 	  Include support for MX51 Babbage platform, also known as MX51EVK in
 	  u-boot. This includes specific configurations for the board and its
@@ -17,6 +20,8 @@ config MACH_MX51_BABBAGE
 
 config MACH_MX51_3DS
 	bool "Support MX51PDK (3DS)"
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_SPI_IMX
 	select MXC_DEBUG_BOARD
 	help
 	  Include support for MX51PDK (3DS) platform. This includes specific
@@ -24,6 +29,10 @@ config MACH_MX51_3DS
 
 config MACH_EUKREA_CPUIMX51
 	bool "Support Eukrea CPUIMX51 module"
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SPI_IMX
 	help
 	  Include support for Eukrea CPUIMX51 platform. This includes
 	  specific configurations for the module and its peripherals.
@@ -36,10 +45,43 @@ choice
 config MACH_EUKREA_MBIMX51_BASEBOARD
 	prompt "Eukrea MBIMX51 development board"
 	bool
+	select IMX_HAVE_PLATFORM_ESDHC
 	help
 	  This adds board specific devices that can be found on Eukrea's
 	  MBIMX51 evaluation board.
 
 endchoice
 
+config MACH_EUKREA_CPUIMX51SD
+	bool "Support Eukrea CPUIMX51SD module"
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	help
+	  Include support for Eukrea CPUIMX51SD platform. This includes
+	  specific configurations for the module and its peripherals.
+
+choice
+	prompt "Baseboard"
+	depends on MACH_EUKREA_CPUIMX51SD
+	default MACH_EUKREA_MBIMXSD51_BASEBOARD
+
+config MACH_EUKREA_MBIMXSD51_BASEBOARD
+	prompt "Eukrea MBIMXSD development board"
+	bool
+	select IMX_HAVE_PLATFORM_ESDHC
+	help
+	  This adds board specific devices that can be found on Eukrea's
+	  MBIMXSD evaluation board.
+
+endchoice
+
+config MACH_MX51_EFIKAMX
+	bool "Support MX51 Genesi Efika MX nettop"
+	select IMX_HAVE_PLATFORM_IMX_UART
+	help
+	  Include support for Genesi Efika MX nettop. This includes specific
+	  configurations for the board and its peripherals.
+
 endif
diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile
index 86c66e7f52f..1769c161a60 100644
--- a/arch/arm/mach-mx5/Makefile
+++ b/arch/arm/mach-mx5/Makefile
@@ -9,3 +9,6 @@ obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o
 obj-$(CONFIG_MACH_MX51_3DS) += board-mx51_3ds.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += board-cpuimx51.o
 obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += board-cpuimx51sd.o
+obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd-baseboard.o
+obj-$(CONFIG_MACH_MX51_EFIKAMX) += board-mx51_efikamx.o
diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
index 623607a20f5..6a9792fd0a7 100644
--- a/arch/arm/mach-mx5/board-cpuimx51.c
+++ b/arch/arm/mach-mx5/board-cpuimx51.c
@@ -28,9 +28,7 @@
 #include <mach/eukrea-baseboards.h>
 #include <mach/common.h>
 #include <mach/hardware.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx51.h>
-#include <mach/i2c.h>
 #include <mach/mxc_ehci.h>
 
 #include <asm/irq.h>
@@ -39,6 +37,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 
+#include "devices-imx51.h"
 #include "devices.h"
 
 #define CPUIMX51_USBH1_STP	(0*32 + 27)
@@ -109,7 +108,6 @@ static struct platform_device serial_device = {
 #endif
 
 static struct platform_device *devices[] __initdata = {
-	&mxc_fec_device,
 #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
 	&serial_device,
 #endif
@@ -148,11 +146,19 @@ static struct pad_desc eukrea_cpuimx51_pads[] = {
 	MX51_PAD_USBH1_STP__USBH1_STP,
 };
 
-static struct imxuart_platform_data uart_pdata = {
+static const struct mxc_nand_platform_data
+		eukrea_cpuimx51_nand_board_info __initconst = {
+	.width		= 1,
+	.hw_ecc		= 1,
+	.flash_bbt	= 1,
+};
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static struct imxi2c_platform_data eukrea_cpuimx51_i2c_data = {
+static const
+struct imxi2c_platform_data eukrea_cpuimx51_i2c_data __initconst = {
 	.bitrate = 100000,
 };
 
@@ -239,7 +245,9 @@ static void __init eukrea_cpuimx51_init(void)
 	mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51_pads,
 					ARRAY_SIZE(eukrea_cpuimx51_pads));
 
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	imx51_add_imx_uart(0, &uart_pdata);
+	imx51_add_mxc_nand(&eukrea_cpuimx51_nand_board_info);
+
 	gpio_request(CPUIMX51_QUARTA_GPIO, "quarta_irq");
 	gpio_direction_input(CPUIMX51_QUARTA_GPIO);
 	gpio_free(CPUIMX51_QUARTA_GPIO);
@@ -253,9 +261,10 @@ static void __init eukrea_cpuimx51_init(void)
 	gpio_direction_input(CPUIMX51_QUARTD_GPIO);
 	gpio_free(CPUIMX51_QUARTD_GPIO);
 
+	imx51_add_fec(NULL);
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
-	mxc_register_device(&mxc_i2c_device1, &eukrea_cpuimx51_i2c_data);
+	imx51_add_imx_i2c(1, &eukrea_cpuimx51_i2c_data);
 	i2c_register_board_info(1, eukrea_cpuimx51_i2c_devices,
 				ARRAY_SIZE(eukrea_cpuimx51_i2c_devices));
 
@@ -283,8 +292,6 @@ static struct sys_timer mxc_timer = {
 
 MACHINE_START(EUKREA_CPUIMX51, "Eukrea CPUIMX51 Module")
 	/* Maintainer: Eric Bénard <eric@eukrea.com> */
-	.phys_io = MX51_AIPS1_BASE_ADDR,
-	.io_pg_offst = ((MX51_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params = PHYS_OFFSET + 0x100,
 	.map_io = mx51_map_io,
 	.init_irq = mx51_init_irq,
diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c
new file mode 100644
index 00000000000..4b3a6119c5f
--- /dev/null
+++ b/arch/arm/mach-mx5/board-cpuimx51sd.c
@@ -0,0 +1,331 @@
+/*
+ *
+ * Copyright (C) 2010 Eric Bénard <eric@eukrea.com>
+ *
+ * based on board-mx51_babbage.c which is
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/i2c/tsc2007.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/fsl_devices.h>
+#include <linux/i2c-gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/can/platform/mcp251x.h>
+
+#include <mach/eukrea-baseboards.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-mx51.h>
+#include <mach/mxc_ehci.h>
+
+#include <asm/irq.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include "devices-imx51.h"
+#include "devices.h"
+
+#define USBH1_RST		(1*32 + 28)
+#define ETH_RST			(1*32 + 31)
+#define TSC2007_IRQGPIO		(2*32 + 12)
+#define CAN_IRQGPIO		(0*32 + 1)
+#define CAN_RST			(3*32 + 15)
+#define CAN_NCS			(3*32 + 24)
+#define CAN_RXOBF		(0*32 + 4)
+#define CAN_RX1BF		(0*32 + 6)
+#define CAN_TXORTS		(0*32 + 7)
+#define CAN_TX1RTS		(0*32 + 8)
+#define CAN_TX2RTS		(0*32 + 9)
+#define I2C_SCL			(3*32 + 16)
+#define I2C_SDA			(3*32 + 17)
+
+/* USB_CTRL_1 */
+#define MX51_USB_CTRL_1_OFFSET		0x10
+#define MX51_USB_CTRL_UH1_EXT_CLK_EN	(1 << 25)
+
+#define	MX51_USB_PLLDIV_12_MHZ		0x00
+#define	MX51_USB_PLL_DIV_19_2_MHZ	0x01
+#define	MX51_USB_PLL_DIV_24_MHZ		0x02
+
+#define CPUIMX51SD_GPIO_3_12 IOMUX_PAD(0x57C, 0x194, 3, 0x0, 0, \
+				MX51_PAD_CTRL_1 | PAD_CTL_PUS_22K_UP)
+
+static struct pad_desc eukrea_cpuimx51sd_pads[] = {
+	/* UART1 */
+	MX51_PAD_UART1_RXD__UART1_RXD,
+	MX51_PAD_UART1_TXD__UART1_TXD,
+	MX51_PAD_UART1_RTS__UART1_RTS,
+	MX51_PAD_UART1_CTS__UART1_CTS,
+
+	/* USB HOST1 */
+	MX51_PAD_USBH1_CLK__USBH1_CLK,
+	MX51_PAD_USBH1_DIR__USBH1_DIR,
+	MX51_PAD_USBH1_NXT__USBH1_NXT,
+	MX51_PAD_USBH1_DATA0__USBH1_DATA0,
+	MX51_PAD_USBH1_DATA1__USBH1_DATA1,
+	MX51_PAD_USBH1_DATA2__USBH1_DATA2,
+	MX51_PAD_USBH1_DATA3__USBH1_DATA3,
+	MX51_PAD_USBH1_DATA4__USBH1_DATA4,
+	MX51_PAD_USBH1_DATA5__USBH1_DATA5,
+	MX51_PAD_USBH1_DATA6__USBH1_DATA6,
+	MX51_PAD_USBH1_DATA7__USBH1_DATA7,
+	MX51_PAD_USBH1_STP__USBH1_STP,
+	MX51_PAD_EIM_CS3__GPIO_2_28,		/* PHY nRESET */
+
+	/* FEC */
+	MX51_PAD_EIM_DTACK__GPIO_2_31,		/* PHY nRESET */
+
+	/* HSI2C */
+	MX51_PAD_I2C1_CLK__GPIO_4_16,
+	MX51_PAD_I2C1_DAT__GPIO_4_17,
+
+	/* CAN */
+	MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
+	MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
+	MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
+	MX51_PAD_CSPI1_SS0__GPIO_4_24,		/* nCS */
+	MX51_PAD_CSI2_PIXCLK__GPIO_4_15,	/* nReset */
+	MX51_PAD_GPIO_1_1__GPIO_1_1,		/* IRQ */
+	MX51_PAD_GPIO_1_4__GPIO_1_4,		/* Control signals */
+	MX51_PAD_GPIO_1_6__GPIO_1_6,
+	MX51_PAD_GPIO_1_7__GPIO_1_7,
+	MX51_PAD_GPIO_1_8__GPIO_1_8,
+	MX51_PAD_GPIO_1_9__GPIO_1_9,
+
+	/* Touchscreen */
+	CPUIMX51SD_GPIO_3_12,			/* IRQ */
+};
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static int ts_get_pendown_state(void)
+{
+	return gpio_get_value(TSC2007_IRQGPIO) ? 0 : 1;
+}
+
+static struct tsc2007_platform_data tsc2007_info = {
+	.model			= 2007,
+	.x_plate_ohms		= 180,
+	.get_pendown_state	= ts_get_pendown_state,
+};
+
+static struct i2c_board_info eukrea_cpuimx51sd_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("pcf8563", 0x51),
+	}, {
+		I2C_BOARD_INFO("tsc2007", 0x49),
+		.type		= "tsc2007",
+		.platform_data	= &tsc2007_info,
+		.irq		= gpio_to_irq(TSC2007_IRQGPIO),
+	},
+};
+
+static const struct mxc_nand_platform_data
+		eukrea_cpuimx51sd_nand_board_info __initconst = {
+	.width		= 1,
+	.hw_ecc		= 1,
+	.flash_bbt	= 1,
+};
+
+/* This function is board specific as the bit mask for the plldiv will also
+be different for other Freescale SoCs, thus a common bitmask is not
+possible and cannot get place in /plat-mxc/ehci.c.*/
+static int initialize_otg_port(struct platform_device *pdev)
+{
+	u32 v;
+	void __iomem *usb_base;
+	void __iomem *usbother_base;
+
+	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
+
+	/* Set the PHY clock to 19.2MHz */
+	v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
+	v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
+	v |= MX51_USB_PLL_DIV_19_2_MHZ;
+	__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
+	iounmap(usb_base);
+	return 0;
+}
+
+static int initialize_usbh1_port(struct platform_device *pdev)
+{
+	u32 v;
+	void __iomem *usb_base;
+	void __iomem *usbother_base;
+
+	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
+
+	/* The clock for the USBH1 ULPI port will come from the PHY. */
+	v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET);
+	__raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN,
+			usbother_base + MX51_USB_CTRL_1_OFFSET);
+	iounmap(usb_base);
+	return 0;
+}
+
+static struct mxc_usbh_platform_data dr_utmi_config = {
+	.init		= initialize_otg_port,
+	.portsc	= MXC_EHCI_UTMI_16BIT,
+	.flags	= MXC_EHCI_INTERNAL_PHY,
+};
+
+static struct fsl_usb2_platform_data usb_pdata = {
+	.operating_mode	= FSL_USB2_DR_DEVICE,
+	.phy_mode	= FSL_USB2_PHY_UTMI_WIDE,
+};
+
+static struct mxc_usbh_platform_data usbh1_config = {
+	.init		= initialize_usbh1_port,
+	.portsc	= MXC_EHCI_MODE_ULPI,
+	.flags	= (MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_ITC_NO_THRESHOLD),
+};
+
+static int otg_mode_host;
+
+static int __init eukrea_cpuimx51sd_otg_mode(char *options)
+{
+	if (!strcmp(options, "host"))
+		otg_mode_host = 1;
+	else if (!strcmp(options, "device"))
+		otg_mode_host = 0;
+	else
+		pr_info("otg_mode neither \"host\" nor \"device\". "
+			"Defaulting to device\n");
+	return 0;
+}
+__setup("otg_mode=", eukrea_cpuimx51sd_otg_mode);
+
+static struct i2c_gpio_platform_data pdata = {
+	.sda_pin		= I2C_SDA,
+	.sda_is_open_drain	= 0,
+	.scl_pin		= I2C_SCL,
+	.scl_is_open_drain	= 0,
+	.udelay			= 2,
+};
+
+static struct platform_device hsi2c_gpio_device = {
+	.name			= "i2c-gpio",
+	.id			= 0,
+	.dev.platform_data	= &pdata,
+};
+
+static struct mcp251x_platform_data mcp251x_info = {
+	.oscillator_frequency = 24E6,
+};
+
+static struct spi_board_info cpuimx51sd_spi_device[] = {
+	{
+		.modalias        = "mcp2515",
+		.max_speed_hz    = 6500000,
+		.bus_num         = 0,
+		.mode		= SPI_MODE_0,
+		.chip_select     = 0,
+		.platform_data   = &mcp251x_info,
+		.irq             = gpio_to_irq(0 * 32 + 1)
+	},
+};
+
+static int cpuimx51sd_spi1_cs[] = {
+	CAN_NCS,
+};
+
+static const struct spi_imx_master cpuimx51sd_ecspi1_pdata __initconst = {
+	.chipselect	= cpuimx51sd_spi1_cs,
+	.num_chipselect	= ARRAY_SIZE(cpuimx51sd_spi1_cs),
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&hsi2c_gpio_device,
+};
+
+static void __init eukrea_cpuimx51sd_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51sd_pads,
+					ARRAY_SIZE(eukrea_cpuimx51sd_pads));
+
+	imx51_add_imx_uart(0, &uart_pdata);
+	imx51_add_mxc_nand(&eukrea_cpuimx51sd_nand_board_info);
+
+	gpio_request(ETH_RST, "eth_rst");
+	gpio_set_value(ETH_RST, 1);
+	imx51_add_fec(NULL);
+
+	gpio_request(CAN_IRQGPIO, "can_irq");
+	gpio_direction_input(CAN_IRQGPIO);
+	gpio_free(CAN_IRQGPIO);
+	gpio_request(CAN_NCS, "can_ncs");
+	gpio_direction_output(CAN_NCS, 1);
+	gpio_free(CAN_NCS);
+	gpio_request(CAN_RST, "can_rst");
+	gpio_direction_output(CAN_RST, 0);
+	msleep(20);
+	gpio_set_value(CAN_RST, 1);
+	imx51_add_ecspi(0, &cpuimx51sd_ecspi1_pdata);
+	spi_register_board_info(cpuimx51sd_spi_device,
+				ARRAY_SIZE(cpuimx51sd_spi_device));
+
+	gpio_request(TSC2007_IRQGPIO, "tsc2007_irq");
+	gpio_direction_input(TSC2007_IRQGPIO);
+	gpio_free(TSC2007_IRQGPIO);
+
+	i2c_register_board_info(0, eukrea_cpuimx51sd_i2c_devices,
+			ARRAY_SIZE(eukrea_cpuimx51sd_i2c_devices));
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+
+	if (otg_mode_host)
+		mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
+	else {
+		initialize_otg_port(NULL);
+		mxc_register_device(&mxc_usbdr_udc_device, &usb_pdata);
+	}
+
+	gpio_request(USBH1_RST, "usb_rst");
+	gpio_direction_output(USBH1_RST, 0);
+	msleep(20);
+	gpio_set_value(USBH1_RST, 1);
+	mxc_register_device(&mxc_usbh1_device, &usbh1_config);
+
+#ifdef CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD
+	eukrea_mbimxsd51_baseboard_init();
+#endif
+}
+
+static void __init eukrea_cpuimx51sd_timer_init(void)
+{
+	mx51_clocks_init(32768, 24000000, 22579200, 0);
+}
+
+static struct sys_timer mxc_timer = {
+	.init	= eukrea_cpuimx51sd_timer_init,
+};
+
+MACHINE_START(EUKREA_CPUIMX51SD, "Eukrea CPUIMX51SD")
+	/* Maintainer: Eric Bénard <eric@eukrea.com> */
+	.boot_params = PHYS_OFFSET + 0x100,
+	.map_io = mx51_map_io,
+	.init_irq = mx51_init_irq,
+	.init_machine = eukrea_cpuimx51sd_init,
+	.timer = &mxc_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c
index f95c2fd9466..79ce8dcf3cd 100644
--- a/arch/arm/mach-mx5/board-mx51_3ds.c
+++ b/arch/arm/mach-mx5/board-mx51_3ds.c
@@ -13,6 +13,7 @@
 #include <linux/irq.h>
 #include <linux/platform_device.h>
 #include <linux/input/matrix_keypad.h>
+#include <linux/spi/spi.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -21,12 +22,13 @@
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/iomux-mx51.h>
-#include <mach/imx-uart.h>
 #include <mach/3ds_debugboard.h>
 
+#include "devices-imx51.h"
 #include "devices.h"
 
 #define EXPIO_PARENT_INT	(MXC_INTERNAL_IRQS + GPIO_PORTA + 6)
+#define MX51_3DS_ECSPI2_CS	(GPIO_PORTC + 28)
 
 static struct pad_desc mx51_3ds_pads[] = {
 	/* UART1 */
@@ -61,19 +63,25 @@ static struct pad_desc mx51_3ds_pads[] = {
 	MX51_PAD_KEY_COL3__KEY_COL3,
 	MX51_PAD_KEY_COL4__KEY_COL4,
 	MX51_PAD_KEY_COL5__KEY_COL5,
+
+	/* eCSPI2 */
+	MX51_PAD_NANDF_RB2__ECSPI2_SCLK,
+	MX51_PAD_NANDF_RB3__ECSPI2_MISO,
+	MX51_PAD_NANDF_D15__ECSPI2_MOSI,
+	MX51_PAD_NANDF_D12__GPIO_3_28,
 };
 
 /* Serial ports */
 #if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
 static inline void mxc_init_imx_uart(void)
 {
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-	mxc_register_device(&mxc_uart_device1, &uart_pdata);
-	mxc_register_device(&mxc_uart_device2, &uart_pdata);
+	imx51_add_imx_uart(0, &uart_pdata);
+	imx51_add_imx_uart(1, &uart_pdata);
+	imx51_add_imx_uart(2, &uart_pdata);
 }
 #else /* !SERIAL_IMX */
 static inline void mxc_init_imx_uart(void)
@@ -127,6 +135,26 @@ static inline void mxc_init_keypad(void)
 }
 #endif
 
+static int mx51_3ds_spi2_cs[] = {
+	MXC_SPI_CS(0),
+	MX51_3DS_ECSPI2_CS,
+};
+
+static const struct spi_imx_master mx51_3ds_ecspi2_pdata __initconst = {
+	.chipselect	= mx51_3ds_spi2_cs,
+	.num_chipselect	= ARRAY_SIZE(mx51_3ds_spi2_cs),
+};
+
+static struct spi_board_info mx51_3ds_spi_nor_device[] = {
+	{
+	 .modalias = "m25p80",
+	 .max_speed_hz = 25000000,	/* max spi clock (SCK) speed in HZ */
+	 .bus_num = 1,
+	 .chip_select = 1,
+	 .mode = SPI_MODE_0,
+	 .platform_data = NULL,},
+};
+
 /*
  * Board specific initialization.
  */
@@ -136,6 +164,10 @@ static void __init mxc_board_init(void)
 					ARRAY_SIZE(mx51_3ds_pads));
 	mxc_init_imx_uart();
 
+	imx51_add_ecspi(1, &mx51_3ds_ecspi2_pdata);
+	spi_register_board_info(mx51_3ds_spi_nor_device,
+				ARRAY_SIZE(mx51_3ds_spi_nor_device));
+
 	if (mxc_expio_init(MX51_CS5_BASE_ADDR, EXPIO_PARENT_INT))
 		printk(KERN_WARNING "Init of the debugboard failed, all "
 				    "devices on the board are unusable.\n");
@@ -154,8 +186,6 @@ static struct sys_timer mxc_timer = {
 
 MACHINE_START(MX51_3DS, "Freescale MX51 3-Stack Board")
 	/* Maintainer: Freescale Semiconductor, Inc. */
-	.phys_io = MX51_AIPS1_BASE_ADDR,
-	.io_pg_offst = ((MX51_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params = PHYS_OFFSET + 0x100,
 	.map_io = mx51_map_io,
 	.init_irq = mx51_init_irq,
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index 6e384d92e62..0821fe9b3b2 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -17,12 +17,11 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/fsl_devices.h>
+#include <linux/fec.h>
 
 #include <mach/common.h>
 #include <mach/hardware.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx51.h>
-#include <mach/i2c.h>
 #include <mach/mxc_ehci.h>
 
 #include <asm/irq.h>
@@ -31,11 +30,13 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 
+#include "devices-imx51.h"
 #include "devices.h"
 
 #define BABBAGE_USB_HUB_RESET	(0*32 + 7)	/* GPIO_1_7 */
 #define BABBAGE_USBH1_STP	(0*32 + 27)	/* GPIO_1_27 */
-#define BABBAGE_PHY_RESET (1*32 +5)	/* GPIO_2_5 */
+#define BABBAGE_PHY_RESET	(1*32 + 5)	/* GPIO_2_5 */
+#define BABBAGE_FEC_PHY_RESET	(1*32 + 14)	/* GPIO_2_14 */
 
 /* USB_CTRL_1 */
 #define MX51_USB_CTRL_1_OFFSET			0x10
@@ -45,10 +46,6 @@
 #define	MX51_USB_PLL_DIV_19_2_MHZ	0x01
 #define	MX51_USB_PLL_DIV_24_MHZ	0x02
 
-static struct platform_device *devices[] __initdata = {
-	&mxc_fec_device,
-};
-
 static struct pad_desc mx51babbage_pads[] = {
 	/* UART1 */
 	MX51_PAD_UART1_RXD__UART1_RXD,
@@ -93,19 +90,41 @@ static struct pad_desc mx51babbage_pads[] = {
 
 	/* USB HUB reset line*/
 	MX51_PAD_GPIO_1_7__GPIO_1_7,
+
+	/* FEC */
+	MX51_PAD_EIM_EB2__FEC_MDIO,
+	MX51_PAD_EIM_EB3__FEC_RDAT1,
+	MX51_PAD_EIM_CS2__FEC_RDAT2,
+	MX51_PAD_EIM_CS3__FEC_RDAT3,
+	MX51_PAD_EIM_CS4__FEC_RX_ER,
+	MX51_PAD_EIM_CS5__FEC_CRS,
+	MX51_PAD_NANDF_RB2__FEC_COL,
+	MX51_PAD_NANDF_RB3__FEC_RXCLK,
+	MX51_PAD_NANDF_RB6__FEC_RDAT0,
+	MX51_PAD_NANDF_RB7__FEC_TDAT0,
+	MX51_PAD_NANDF_CS2__FEC_TX_ER,
+	MX51_PAD_NANDF_CS3__FEC_MDC,
+	MX51_PAD_NANDF_CS4__FEC_TDAT1,
+	MX51_PAD_NANDF_CS5__FEC_TDAT2,
+	MX51_PAD_NANDF_CS6__FEC_TDAT3,
+	MX51_PAD_NANDF_CS7__FEC_TX_EN,
+	MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK,
+
+	/* FEC PHY reset line */
+	MX51_PAD_EIM_A20__GPIO_2_14,
 };
 
 /* Serial ports */
 #if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
 static inline void mxc_init_imx_uart(void)
 {
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-	mxc_register_device(&mxc_uart_device1, &uart_pdata);
-	mxc_register_device(&mxc_uart_device2, &uart_pdata);
+	imx51_add_imx_uart(0, &uart_pdata);
+	imx51_add_imx_uart(1, &uart_pdata);
+	imx51_add_imx_uart(2, &uart_pdata);
 }
 #else /* !SERIAL_IMX */
 static inline void mxc_init_imx_uart(void)
@@ -113,7 +132,7 @@ static inline void mxc_init_imx_uart(void)
 }
 #endif /* SERIAL_IMX */
 
-static struct imxi2c_platform_data babbage_i2c_data = {
+static const struct imxi2c_platform_data babbage_i2c_data __initconst = {
 	.bitrate = 100000,
 };
 
@@ -171,6 +190,22 @@ static inline void babbage_usbhub_reset(void)
 	gpio_set_value(BABBAGE_USB_HUB_RESET, 1);
 }
 
+static inline void babbage_fec_reset(void)
+{
+	int ret;
+
+	/* reset FEC PHY */
+	ret = gpio_request(BABBAGE_FEC_PHY_RESET, "fec-phy-reset");
+	if (ret) {
+		printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
+		return;
+	}
+	gpio_direction_output(BABBAGE_FEC_PHY_RESET, 0);
+	gpio_set_value(BABBAGE_FEC_PHY_RESET, 0);
+	msleep(1);
+	gpio_set_value(BABBAGE_FEC_PHY_RESET, 1);
+}
+
 /* This function is board specific as the bit mask for the plldiv will also
 be different for other Freescale SoCs, thus a common bitmask is not
 possible and cannot get place in /plat-mxc/ehci.c.*/
@@ -178,7 +213,7 @@ static int initialize_otg_port(struct platform_device *pdev)
 {
 	u32 v;
 	void __iomem *usb_base;
-	u32 usbother_base;
+	void __iomem *usbother_base;
 
 	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
 	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
@@ -196,7 +231,7 @@ static int initialize_usbh1_port(struct platform_device *pdev)
 {
 	u32 v;
 	void __iomem *usb_base;
-	u32 usbother_base;
+	void __iomem *usbother_base;
 
 	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
 	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
@@ -250,10 +285,11 @@ static void __init mxc_board_init(void)
 	mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads,
 					ARRAY_SIZE(mx51babbage_pads));
 	mxc_init_imx_uart();
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	babbage_fec_reset();
+	imx51_add_fec(NULL);
 
-	mxc_register_device(&mxc_i2c_device0, &babbage_i2c_data);
-	mxc_register_device(&mxc_i2c_device1, &babbage_i2c_data);
+	imx51_add_imx_i2c(0, &babbage_i2c_data);
+	imx51_add_imx_i2c(1, &babbage_i2c_data);
 	mxc_register_device(&mxc_hsi2c_device, &babbage_hsi2c_data);
 
 	if (otg_mode_host)
@@ -281,9 +317,7 @@ static struct sys_timer mxc_timer = {
 
 MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board")
 	/* Maintainer: Amit Kucheria <amit.kucheria@canonical.com> */
-	.phys_io = MX51_AIPS1_BASE_ADDR,
-	.io_pg_offst = ((MX51_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params = PHYS_OFFSET + 0x100,
+	.boot_params = MX51_PHYS_OFFSET + 0x100,
 	.map_io = mx51_map_io,
 	.init_irq = mx51_init_irq,
 	.init_machine = mxc_board_init,
diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c
new file mode 100644
index 00000000000..6e623bda3ee
--- /dev/null
+++ b/arch/arm/mach-mx5/board-mx51_efikamx.c
@@ -0,0 +1,119 @@
+/*
+ * Copyright (C) 2010 Linaro Limited
+ *
+ * based on code from the following
+ * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved.
+ * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/fsl_devices.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-mx51.h>
+#include <mach/i2c.h>
+#include <mach/mxc_ehci.h>
+
+#include <asm/irq.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include "devices-imx51.h"
+#include "devices.h"
+
+#define	MX51_USB_PLL_DIV_24_MHZ	0x01
+
+static struct pad_desc mx51efikamx_pads[] = {
+	/* UART1 */
+	MX51_PAD_UART1_RXD__UART1_RXD,
+	MX51_PAD_UART1_TXD__UART1_TXD,
+	MX51_PAD_UART1_RTS__UART1_RTS,
+	MX51_PAD_UART1_CTS__UART1_CTS,
+};
+
+/* Serial ports */
+#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
+static const struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static inline void mxc_init_imx_uart(void)
+{
+	imx51_add_imx_uart(0, &uart_pdata);
+	imx51_add_imx_uart(1, &uart_pdata);
+	imx51_add_imx_uart(2, &uart_pdata);
+}
+#else /* !SERIAL_IMX */
+static inline void mxc_init_imx_uart(void)
+{
+}
+#endif /* SERIAL_IMX */
+
+/* This function is board specific as the bit mask for the plldiv will also
+ * be different for other Freescale SoCs, thus a common bitmask is not
+ * possible and cannot get place in /plat-mxc/ehci.c.
+ */
+static int initialize_otg_port(struct platform_device *pdev)
+{
+	u32 v;
+	void __iomem *usb_base;
+	void __iomem *usbother_base;
+	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	usbother_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET);
+
+	/* Set the PHY clock to 19.2MHz */
+	v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
+	v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
+	v |= MX51_USB_PLL_DIV_24_MHZ;
+	__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
+	iounmap(usb_base);
+	return 0;
+}
+
+static struct mxc_usbh_platform_data dr_utmi_config = {
+	.init   = initialize_otg_port,
+	.portsc = MXC_EHCI_UTMI_16BIT,
+	.flags  = MXC_EHCI_INTERNAL_PHY,
+};
+
+static void __init mxc_board_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(mx51efikamx_pads,
+					ARRAY_SIZE(mx51efikamx_pads));
+	mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
+	mxc_init_imx_uart();
+}
+
+static void __init mx51_efikamx_timer_init(void)
+{
+	mx51_clocks_init(32768, 24000000, 22579200, 24576000);
+}
+
+static struct sys_timer mxc_timer = {
+	.init	= mx51_efikamx_timer_init,
+};
+
+MACHINE_START(MX51_EFIKAMX, "Genesi EfikaMX nettop")
+	/* Maintainer: Amit Kucheria <amit.kucheria@linaro.org> */
+	.boot_params = MX51_PHYS_OFFSET + 0x100,
+	.map_io = mx51_map_io,
+	.init_irq = mx51_init_irq,
+	.init_machine =  mxc_board_init,
+	.timer = &mxc_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51.c
index 57c10a9926c..f2aae92cf0e 100644
--- a/arch/arm/mach-mx5/clock-mx51.c
+++ b/arch/arm/mach-mx5/clock-mx51.c
@@ -41,34 +41,66 @@ static struct clk usboh3_clk;
 
 #define MAX_DPLL_WAIT_TRIES	1000 /* 1000 * udelay(1) = 1ms */
 
-static int _clk_ccgr_enable(struct clk *clk)
+/* calculate best pre and post dividers to get the required divider */
+static void __calc_pre_post_dividers(u32 div, u32 *pre, u32 *post,
+	u32 max_pre, u32 max_post)
 {
-	u32 reg;
+	if (div >= max_pre * max_post) {
+		*pre = max_pre;
+		*post = max_post;
+	} else if (div >= max_pre) {
+		u32 min_pre, temp_pre, old_err, err;
+		min_pre = DIV_ROUND_UP(div, max_post);
+		old_err = max_pre;
+		for (temp_pre = max_pre; temp_pre >= min_pre; temp_pre--) {
+			err = div % temp_pre;
+			if (err == 0) {
+				*pre = temp_pre;
+				break;
+			}
+			err = temp_pre - err;
+			if (err < old_err) {
+				old_err = err;
+				*pre = temp_pre;
+			}
+		}
+		*post = DIV_ROUND_UP(div, *pre);
+	} else {
+		*pre = div;
+		*post = 1;
+	}
+}
+
+static void _clk_ccgr_setclk(struct clk *clk, unsigned mode)
+{
+	u32 reg = __raw_readl(clk->enable_reg);
+
+	reg &= ~(MXC_CCM_CCGRx_CG_MASK << clk->enable_shift);
+	reg |= mode << clk->enable_shift;
 
-	reg = __raw_readl(clk->enable_reg);
-	reg |= MXC_CCM_CCGRx_MOD_ON << clk->enable_shift;
 	__raw_writel(reg, clk->enable_reg);
+}
 
+static int _clk_ccgr_enable(struct clk *clk)
+{
+	_clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_ON);
 	return 0;
 }
 
 static void _clk_ccgr_disable(struct clk *clk)
 {
-	u32 reg;
-	reg = __raw_readl(clk->enable_reg);
-	reg &= ~(MXC_CCM_CCGRx_CG_MASK << clk->enable_shift);
-	__raw_writel(reg, clk->enable_reg);
+	_clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_OFF);
+}
 
+static int _clk_ccgr_enable_inrun(struct clk *clk)
+{
+	_clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_IDLE);
+	return 0;
 }
 
 static void _clk_ccgr_disable_inwait(struct clk *clk)
 {
-	u32 reg;
-
-	reg = __raw_readl(clk->enable_reg);
-	reg &= ~(MXC_CCM_CCGRx_CG_MASK << clk->enable_shift);
-	reg |= MXC_CCM_CCGRx_MOD_IDLE << clk->enable_shift;
-	__raw_writel(reg, clk->enable_reg);
+	_clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_IDLE);
 }
 
 /*
@@ -542,60 +574,60 @@ static int _clk_ipg_per_set_parent(struct clk *clk, struct clk *parent)
 	return 0;
 }
 
-static unsigned long clk_uart_get_rate(struct clk *clk)
-{
-	u32 reg, prediv, podf;
-	unsigned long parent_rate;
+#define clk_nfc_set_parent	NULL
 
-	parent_rate = clk_get_rate(clk->parent);
-
-	reg = __raw_readl(MXC_CCM_CSCDR1);
-	prediv = ((reg & MXC_CCM_CSCDR1_UART_CLK_PRED_MASK) >>
-		  MXC_CCM_CSCDR1_UART_CLK_PRED_OFFSET) + 1;
-	podf = ((reg & MXC_CCM_CSCDR1_UART_CLK_PODF_MASK) >>
-		MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET) + 1;
+static unsigned long clk_nfc_get_rate(struct clk *clk)
+{
+	unsigned long rate;
+	u32 reg, div;
 
-	return parent_rate / (prediv * podf);
+	reg = __raw_readl(MXC_CCM_CBCDR);
+	div = ((reg & MXC_CCM_CBCDR_NFC_PODF_MASK) >>
+	       MXC_CCM_CBCDR_NFC_PODF_OFFSET) + 1;
+	rate = clk_get_rate(clk->parent) / div;
+	WARN_ON(rate == 0);
+	return rate;
 }
 
-static int _clk_uart_set_parent(struct clk *clk, struct clk *parent)
+static unsigned long clk_nfc_round_rate(struct clk *clk,
+						unsigned long rate)
 {
-	u32 reg, mux;
+	u32 div;
+	unsigned long parent_rate = clk_get_rate(clk->parent);
 
-	mux = _get_mux(parent, &pll1_sw_clk, &pll2_sw_clk, &pll3_sw_clk,
-		       &lp_apm_clk);
-	reg = __raw_readl(MXC_CCM_CSCMR1) & ~MXC_CCM_CSCMR1_UART_CLK_SEL_MASK;
-	reg |= mux << MXC_CCM_CSCMR1_UART_CLK_SEL_OFFSET;
-	__raw_writel(reg, MXC_CCM_CSCMR1);
+	if (!rate)
+		return -EINVAL;
 
-	return 0;
-}
+	div = parent_rate / rate;
 
-static unsigned long clk_usboh3_get_rate(struct clk *clk)
-{
-	u32 reg, prediv, podf;
-	unsigned long parent_rate;
+	if (parent_rate % rate)
+		div++;
 
-	parent_rate = clk_get_rate(clk->parent);
+	if (div > 8)
+		return -EINVAL;
 
-	reg = __raw_readl(MXC_CCM_CSCDR1);
-	prediv = ((reg & MXC_CCM_CSCDR1_USBOH3_CLK_PRED_MASK) >>
-		  MXC_CCM_CSCDR1_USBOH3_CLK_PRED_OFFSET) + 1;
-	podf = ((reg & MXC_CCM_CSCDR1_USBOH3_CLK_PODF_MASK) >>
-		MXC_CCM_CSCDR1_USBOH3_CLK_PODF_OFFSET) + 1;
+	return parent_rate / div;
 
-	return parent_rate / (prediv * podf);
 }
 
-static int _clk_usboh3_set_parent(struct clk *clk, struct clk *parent)
+static int clk_nfc_set_rate(struct clk *clk, unsigned long rate)
 {
-	u32 reg, mux;
+	u32 reg, div;
+
+	div = clk_get_rate(clk->parent) / rate;
+	if (div == 0)
+		div++;
+	if (((clk_get_rate(clk->parent) / div) != rate) || (div > 8))
+		return -EINVAL;
+
+	reg = __raw_readl(MXC_CCM_CBCDR);
+	reg &= ~MXC_CCM_CBCDR_NFC_PODF_MASK;
+	reg |= (div - 1) << MXC_CCM_CBCDR_NFC_PODF_OFFSET;
+	__raw_writel(reg, MXC_CCM_CBCDR);
 
-	mux = _get_mux(parent, &pll1_sw_clk, &pll2_sw_clk, &pll3_sw_clk,
-		       &lp_apm_clk);
-	reg = __raw_readl(MXC_CCM_CSCMR1) & ~MXC_CCM_CSCMR1_USBOH3_CLK_SEL_MASK;
-	reg |= mux << MXC_CCM_CSCMR1_USBOH3_CLK_SEL_OFFSET;
-	__raw_writel(reg, MXC_CCM_CSCMR1);
+	while (__raw_readl(MXC_CCM_CDHIPR) &
+			MXC_CCM_CDHIPR_NFC_IPG_INT_MEM_PODF_BUSY){
+	}
 
 	return 0;
 }
@@ -620,6 +652,17 @@ static unsigned long get_ckih2_reference_clock_rate(struct clk *clk)
 	return ckih2_reference;
 }
 
+static unsigned long clk_emi_slow_get_rate(struct clk *clk)
+{
+	u32 reg, div;
+
+	reg = __raw_readl(MXC_CCM_CBCDR);
+	div = ((reg & MXC_CCM_CBCDR_EMI_PODF_MASK) >>
+	       MXC_CCM_CBCDR_EMI_PODF_OFFSET) + 1;
+
+	return clk_get_rate(clk->parent) / div;
+}
+
 /* External high frequency clock */
 static struct clk ckih_clk = {
 	.get_rate = get_high_reference_clock_rate,
@@ -715,18 +758,6 @@ static struct clk ipg_perclk = {
 	.set_parent = _clk_ipg_per_set_parent,
 };
 
-static struct clk uart_root_clk = {
-	.parent = &pll2_sw_clk,
-	.get_rate = clk_uart_get_rate,
-	.set_parent = _clk_uart_set_parent,
-};
-
-static struct clk usboh3_clk = {
-	.parent = &pll2_sw_clk,
-	.get_rate = clk_usboh3_get_rate,
-	.set_parent = _clk_usboh3_set_parent,
-};
-
 static struct clk ahb_max_clk = {
 	.parent = &ahb_clk,
 	.enable_reg = MXC_CCM_CCGR0,
@@ -762,45 +793,183 @@ static struct clk kpp_clk = {
 	.id = 0,
 };
 
-#define DEFINE_CLOCK(name, i, er, es, gr, sr, p, s)	\
+static struct clk emi_slow_clk = {
+	.parent = &pll2_sw_clk,
+	.enable_reg = MXC_CCM_CCGR5,
+	.enable_shift = MXC_CCM_CCGRx_CG8_OFFSET,
+	.enable = _clk_ccgr_enable,
+	.disable = _clk_ccgr_disable_inwait,
+	.get_rate = clk_emi_slow_get_rate,
+};
+
+#define DEFINE_CLOCK_CCGR(name, i, er, es, pfx, p, s)	\
 	static struct clk name = {			\
 		.id		= i,			\
 		.enable_reg	= er,			\
 		.enable_shift	= es,			\
-		.get_rate	= gr,			\
-		.set_rate	= sr,			\
+		.get_rate	= pfx##_get_rate,	\
+		.set_rate	= pfx##_set_rate,	\
+		.round_rate	= pfx##_round_rate,	\
+		.set_parent	= pfx##_set_parent,	\
 		.enable		= _clk_ccgr_enable,	\
 		.disable	= _clk_ccgr_disable,	\
 		.parent		= p,			\
 		.secondary	= s,			\
 	}
 
-/* DEFINE_CLOCK(name, id, enable_reg, enable_shift,
-   get_rate, set_rate, parent, secondary); */
+#define DEFINE_CLOCK_MAX(name, i, er, es, pfx, p, s)	\
+	static struct clk name = {			\
+		.id		= i,			\
+		.enable_reg	= er,			\
+		.enable_shift	= es,			\
+		.get_rate	= pfx##_get_rate,	\
+		.set_rate	= pfx##_set_rate,	\
+		.set_parent	= pfx##_set_parent,	\
+		.enable		= _clk_max_enable,	\
+		.disable	= _clk_max_disable,	\
+		.parent		= p,			\
+		.secondary	= s,			\
+	}
+
+#define CLK_GET_RATE(name, nr, bitsname)				\
+static unsigned long clk_##name##_get_rate(struct clk *clk)		\
+{									\
+	u32 reg, pred, podf;						\
+									\
+	reg = __raw_readl(MXC_CCM_CSCDR##nr);				\
+	pred = (reg & MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_MASK)	\
+		>> MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_OFFSET;	\
+	podf = (reg & MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_MASK)	\
+		>> MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_OFFSET;	\
+									\
+	return DIV_ROUND_CLOSEST(clk_get_rate(clk->parent),		\
+			(pred + 1) * (podf + 1));			\
+}
+
+#define CLK_SET_PARENT(name, nr, bitsname)				\
+static int clk_##name##_set_parent(struct clk *clk, struct clk *parent)	\
+{									\
+	u32 reg, mux;							\
+									\
+	mux = _get_mux(parent, &pll1_sw_clk, &pll2_sw_clk,		\
+			&pll3_sw_clk, &lp_apm_clk);			\
+	reg = __raw_readl(MXC_CCM_CSCMR##nr) &				\
+		~MXC_CCM_CSCMR##nr##_##bitsname##_CLK_SEL_MASK;		\
+	reg |= mux << MXC_CCM_CSCMR##nr##_##bitsname##_CLK_SEL_OFFSET;	\
+	__raw_writel(reg, MXC_CCM_CSCMR##nr);				\
+									\
+	return 0;							\
+}
+
+#define CLK_SET_RATE(name, nr, bitsname)				\
+static int clk_##name##_set_rate(struct clk *clk, unsigned long rate)	\
+{									\
+	u32 reg, div, parent_rate;					\
+	u32 pre = 0, post = 0;						\
+									\
+	parent_rate = clk_get_rate(clk->parent);			\
+	div = parent_rate / rate;					\
+									\
+	if ((parent_rate / div) != rate)				\
+		return -EINVAL;						\
+									\
+	__calc_pre_post_dividers(div, &pre, &post,			\
+		(MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_MASK >>	\
+		MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_OFFSET) + 1,	\
+		(MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_MASK >>	\
+		MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_OFFSET) + 1);\
+									\
+	/* Set sdhc1 clock divider */					\
+	reg = __raw_readl(MXC_CCM_CSCDR##nr) &				\
+		~(MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_MASK	\
+		| MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_MASK);	\
+	reg |= (post - 1) <<						\
+		MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_OFFSET;	\
+	reg |= (pre - 1) <<						\
+		MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_OFFSET;	\
+	__raw_writel(reg, MXC_CCM_CSCDR##nr);				\
+									\
+	return 0;							\
+}
+
+/* UART */
+CLK_GET_RATE(uart, 1, UART)
+CLK_SET_PARENT(uart, 1, UART)
+
+static struct clk uart_root_clk = {
+	.parent = &pll2_sw_clk,
+	.get_rate = clk_uart_get_rate,
+	.set_parent = clk_uart_set_parent,
+};
+
+/* USBOH3 */
+CLK_GET_RATE(usboh3, 1, USBOH3)
+CLK_SET_PARENT(usboh3, 1, USBOH3)
+
+static struct clk usboh3_clk = {
+	.parent = &pll2_sw_clk,
+	.get_rate = clk_usboh3_get_rate,
+	.set_parent = clk_usboh3_set_parent,
+};
+
+/* eCSPI */
+CLK_GET_RATE(ecspi, 2, CSPI)
+CLK_SET_PARENT(ecspi, 1, CSPI)
+
+static struct clk ecspi_main_clk = {
+	.parent = &pll3_sw_clk,
+	.get_rate = clk_ecspi_get_rate,
+	.set_parent = clk_ecspi_set_parent,
+};
+
+/* eSDHC */
+CLK_GET_RATE(esdhc1, 1, ESDHC1_MSHC1)
+CLK_SET_PARENT(esdhc1, 1, ESDHC1_MSHC1)
+CLK_SET_RATE(esdhc1, 1, ESDHC1_MSHC1)
+
+CLK_GET_RATE(esdhc2, 1, ESDHC2_MSHC2)
+CLK_SET_PARENT(esdhc2, 1, ESDHC2_MSHC2)
+CLK_SET_RATE(esdhc2, 1, ESDHC2_MSHC2)
+
+#define DEFINE_CLOCK_FULL(name, i, er, es, gr, sr, e, d, p, s)		\
+	static struct clk name = {					\
+		.id		= i,					\
+		.enable_reg	= er,					\
+		.enable_shift	= es,					\
+		.get_rate	= gr,					\
+		.set_rate	= sr,					\
+		.enable		= e,					\
+		.disable	= d,					\
+		.parent		= p,					\
+		.secondary	= s,					\
+	}
+
+#define DEFINE_CLOCK(name, i, er, es, gr, sr, p, s)			\
+	DEFINE_CLOCK_FULL(name, i, er, es, gr, sr, _clk_ccgr_enable, _clk_ccgr_disable, p, s)
 
 /* Shared peripheral bus arbiter */
 DEFINE_CLOCK(spba_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG0_OFFSET,
 	NULL,  NULL, &ipg_clk, NULL);
 
 /* UART */
-DEFINE_CLOCK(uart1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG4_OFFSET,
-	NULL,  NULL, &uart_root_clk, NULL);
-DEFINE_CLOCK(uart2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG6_OFFSET,
-	NULL,  NULL, &uart_root_clk, NULL);
-DEFINE_CLOCK(uart3_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG8_OFFSET,
-	NULL,  NULL, &uart_root_clk, NULL);
 DEFINE_CLOCK(uart1_ipg_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG3_OFFSET,
 	NULL,  NULL, &ipg_clk, &aips_tz1_clk);
 DEFINE_CLOCK(uart2_ipg_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG5_OFFSET,
 	NULL,  NULL, &ipg_clk, &aips_tz1_clk);
 DEFINE_CLOCK(uart3_ipg_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG7_OFFSET,
 	NULL,  NULL, &ipg_clk, &spba_clk);
+DEFINE_CLOCK(uart1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG4_OFFSET,
+	NULL,  NULL, &uart_root_clk, &uart1_ipg_clk);
+DEFINE_CLOCK(uart2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG6_OFFSET,
+	NULL,  NULL, &uart_root_clk, &uart2_ipg_clk);
+DEFINE_CLOCK(uart3_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG8_OFFSET,
+	NULL,  NULL, &uart_root_clk, &uart3_ipg_clk);
 
 /* GPT */
-DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET,
-	NULL,  NULL, &ipg_clk, NULL);
 DEFINE_CLOCK(gpt_ipg_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG10_OFFSET,
 	NULL,  NULL, &ipg_clk, NULL);
+DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET,
+	NULL,  NULL, &ipg_clk, &gpt_ipg_clk);
 
 /* I2C */
 DEFINE_CLOCK(i2c1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG9_OFFSET,
@@ -814,6 +983,52 @@ DEFINE_CLOCK(hsi2c_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG11_OFFSET,
 DEFINE_CLOCK(fec_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG12_OFFSET,
 	NULL,  NULL, &ipg_clk, NULL);
 
+/* NFC */
+DEFINE_CLOCK_CCGR(nfc_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG10_OFFSET,
+	clk_nfc, &emi_slow_clk, NULL);
+
+/* SSI */
+DEFINE_CLOCK(ssi1_ipg_clk, 0, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG8_OFFSET,
+	NULL, NULL, &ipg_clk, NULL);
+DEFINE_CLOCK(ssi1_clk, 0, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG9_OFFSET,
+	NULL, NULL, &pll3_sw_clk, &ssi1_ipg_clk);
+DEFINE_CLOCK(ssi2_ipg_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG10_OFFSET,
+	NULL, NULL, &ipg_clk, NULL);
+DEFINE_CLOCK(ssi2_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG11_OFFSET,
+	NULL, NULL, &pll3_sw_clk, &ssi2_ipg_clk);
+
+/* eCSPI */
+DEFINE_CLOCK_FULL(ecspi1_ipg_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG9_OFFSET,
+		NULL, NULL, _clk_ccgr_enable_inrun, _clk_ccgr_disable,
+		&ipg_clk, &spba_clk);
+DEFINE_CLOCK(ecspi1_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG10_OFFSET,
+		NULL, NULL, &ecspi_main_clk, &ecspi1_ipg_clk);
+DEFINE_CLOCK_FULL(ecspi2_ipg_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG11_OFFSET,
+		NULL, NULL, _clk_ccgr_enable_inrun, _clk_ccgr_disable,
+		&ipg_clk, &aips_tz2_clk);
+DEFINE_CLOCK(ecspi2_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG12_OFFSET,
+		NULL, NULL, &ecspi_main_clk, &ecspi2_ipg_clk);
+
+/* CSPI */
+DEFINE_CLOCK(cspi_ipg_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG9_OFFSET,
+		NULL, NULL, &ipg_clk, &aips_tz2_clk);
+DEFINE_CLOCK(cspi_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG13_OFFSET,
+		NULL, NULL, &ipg_clk, &cspi_ipg_clk);
+
+/* SDMA */
+DEFINE_CLOCK(sdma_clk, 1, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG15_OFFSET,
+		NULL, NULL, &ahb_clk, NULL);
+
+/* eSDHC */
+DEFINE_CLOCK_FULL(esdhc1_ipg_clk, 0, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG0_OFFSET,
+	NULL,  NULL, _clk_max_enable, _clk_max_disable, &ipg_clk, NULL);
+DEFINE_CLOCK_MAX(esdhc1_clk, 0, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG1_OFFSET,
+	clk_esdhc1, &pll2_sw_clk, &esdhc1_ipg_clk);
+DEFINE_CLOCK_FULL(esdhc2_ipg_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG2_OFFSET,
+	NULL,  NULL, _clk_max_enable, _clk_max_disable, &ipg_clk, NULL);
+DEFINE_CLOCK_MAX(esdhc2_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG3_OFFSET,
+	clk_esdhc2, &pll2_sw_clk, &esdhc2_ipg_clk);
+
 #define _REGISTER_CLOCK(d, n, c) \
        { \
 		.dev_id = d, \
@@ -837,6 +1052,18 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usboh3_clk)
 	_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", ahb_clk)
 	_REGISTER_CLOCK("imx-keypad.0", NULL, kpp_clk)
+	_REGISTER_CLOCK("mxc_nand", NULL, nfc_clk)
+	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
+	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
+	_REGISTER_CLOCK("imx-sdma", NULL, sdma_clk)
+	_REGISTER_CLOCK(NULL, "ckih", ckih_clk)
+	_REGISTER_CLOCK(NULL, "ckih2", ckih2_clk)
+	_REGISTER_CLOCK(NULL, "gpt_32k", gpt_32k_clk)
+	_REGISTER_CLOCK("imx51-ecspi.0", NULL, ecspi1_clk)
+	_REGISTER_CLOCK("imx51-ecspi.1", NULL, ecspi2_clk)
+	_REGISTER_CLOCK("imx51-cspi.0", NULL, cspi_clk)
+	_REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk)
+	_REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_clk)
 };
 
 static void clk_tree_init(void)
@@ -880,6 +1107,14 @@ int __init mx51_clocks_init(unsigned long ckil, unsigned long osc,
 	/* set the usboh3_clk parent to pll2_sw_clk */
 	clk_set_parent(&usboh3_clk, &pll2_sw_clk);
 
+	/* Set SDHC parents to be PLL2 */
+	clk_set_parent(&esdhc1_clk, &pll2_sw_clk);
+	clk_set_parent(&esdhc2_clk, &pll2_sw_clk);
+
+	/* set SDHC root clock as 166.25MHZ*/
+	clk_set_rate(&esdhc1_clk, 166250000);
+	clk_set_rate(&esdhc2_clk, 166250000);
+
 	/* System timer */
 	mxc_timer_init(&gpt_clk, MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR),
 		MX51_MXC_INT_GPT);
diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-mx5/cpu.c
index 2d37785e385..eaacb6e9b5d 100644
--- a/arch/arm/mach-mx5/cpu.c
+++ b/arch/arm/mach-mx5/cpu.c
@@ -70,6 +70,25 @@ int mx51_revision(void)
 }
 EXPORT_SYMBOL(mx51_revision);
 
+#ifdef CONFIG_NEON
+
+/*
+ * All versions of the silicon before Rev. 3 have broken NEON implementations.
+ * Dependent on link order - so the assumption is that vfp_init is called
+ * before us.
+ */
+static int __init mx51_neon_fixup(void)
+{
+	if (mx51_revision() < MX51_CHIP_REV_3_0 && (elf_hwcap & HWCAP_NEON)) {
+		elf_hwcap &= ~HWCAP_NEON;
+		pr_info("Turning off NEON support, detected broken NEON implementation\n");
+	}
+	return 0;
+}
+
+late_initcall(mx51_neon_fixup);
+#endif
+
 static int __init post_cpu_init(void)
 {
 	unsigned int reg;
diff --git a/arch/arm/mach-mx5/devices-imx51.h b/arch/arm/mach-mx5/devices-imx51.h
new file mode 100644
index 00000000000..5cc910e6053
--- /dev/null
+++ b/arch/arm/mach-mx5/devices-imx51.h
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/mx51.h>
+#include <mach/devices-common.h>
+
+extern const struct imx_fec_data imx51_fec_data __initconst;
+#define imx51_add_fec(pdata)	\
+	imx_add_fec(&imx51_fec_data, pdata)
+
+extern const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst;
+#define imx51_add_imx_i2c(id, pdata)	\
+	imx_add_imx_i2c(&imx51_imx_i2c_data[id], pdata)
+
+extern const struct imx_imx_ssi_data imx51_imx_ssi_data[] __initconst;
+#define imx51_add_imx_ssi(id, pdata)	\
+	imx_add_imx_ssi(&imx51_imx_ssi_data[id], pdata)
+
+extern const struct imx_imx_uart_1irq_data imx51_imx_uart_data[] __initconst;
+#define imx51_add_imx_uart(id, pdata)	\
+	imx_add_imx_uart_1irq(&imx51_imx_uart_data[id], pdata)
+
+extern const struct imx_mxc_nand_data imx51_mxc_nand_data __initconst;
+#define imx51_add_mxc_nand(pdata)	\
+	imx_add_mxc_nand(&imx51_mxc_nand_data, pdata)
+
+extern const struct imx_spi_imx_data imx51_cspi_data __initconst;
+#define imx51_add_cspi(pdata)	\
+	imx_add_spi_imx(&imx51_cspi_data, pdata)
+
+extern const struct imx_spi_imx_data imx51_ecspi_data[] __initconst;
+#define imx51_add_ecspi(id, pdata)	\
+	imx_add_spi_imx(&imx51_ecspi_data[id], pdata)
+
+extern const struct imx_esdhc_imx_data imx51_esdhc_data[] __initconst;
+#define imx51_add_esdhc(id, pdata)	\
+	imx_add_esdhc(&imx51_esdhc_data[id], pdata)
diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c
index 1920ff4963b..4c7be87a7c9 100644
--- a/arch/arm/mach-mx5/devices.c
+++ b/arch/arm/mach-mx5/devices.c
@@ -17,120 +17,6 @@
 #include <mach/imx-uart.h>
 #include <mach/irqs.h>
 
-static struct resource uart0[] = {
-	{
-		.start = MX51_UART1_BASE_ADDR,
-		.end = MX51_UART1_BASE_ADDR + 0xfff,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX51_MXC_INT_UART1,
-		.end = MX51_MXC_INT_UART1,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device0 = {
-	.name = "imx-uart",
-	.id = 0,
-	.resource = uart0,
-	.num_resources = ARRAY_SIZE(uart0),
-};
-
-static struct resource uart1[] = {
-	{
-		.start = MX51_UART2_BASE_ADDR,
-		.end = MX51_UART2_BASE_ADDR + 0xfff,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX51_MXC_INT_UART2,
-		.end = MX51_MXC_INT_UART2,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device1 = {
-	.name = "imx-uart",
-	.id = 1,
-	.resource = uart1,
-	.num_resources = ARRAY_SIZE(uart1),
-};
-
-static struct resource uart2[] = {
-	{
-		.start = MX51_UART3_BASE_ADDR,
-		.end = MX51_UART3_BASE_ADDR + 0xfff,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX51_MXC_INT_UART3,
-		.end = MX51_MXC_INT_UART3,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device2 = {
-	.name = "imx-uart",
-	.id = 2,
-	.resource = uart2,
-	.num_resources = ARRAY_SIZE(uart2),
-};
-
-static struct resource mxc_fec_resources[] = {
-	{
-		.start	= MX51_MXC_FEC_BASE_ADDR,
-		.end	= MX51_MXC_FEC_BASE_ADDR + 0xfff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= MX51_MXC_INT_FEC,
-		.end	= MX51_MXC_INT_FEC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_fec_device = {
-	.name = "fec",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_fec_resources),
-	.resource = mxc_fec_resources,
-};
-
-static struct resource mxc_i2c0_resources[] = {
-	{
-		.start = MX51_I2C1_BASE_ADDR,
-		.end = MX51_I2C1_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX51_MXC_INT_I2C1,
-		.end = MX51_MXC_INT_I2C1,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_i2c_device0 = {
-	.name = "imx-i2c",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_i2c0_resources),
-	.resource = mxc_i2c0_resources,
-};
-
-static struct resource mxc_i2c1_resources[] = {
-	{
-		.start = MX51_I2C2_BASE_ADDR,
-		.end = MX51_I2C2_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX51_MXC_INT_I2C2,
-		.end = MX51_MXC_INT_I2C2,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_i2c_device1 = {
-	.name = "imx-i2c",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(mxc_i2c1_resources),
-	.resource = mxc_i2c1_resources,
-};
-
 static struct resource mxc_hsi2c_resources[] = {
 	{
 		.start = MX51_HSI2C_DMA_BASE_ADDR,
diff --git a/arch/arm/mach-mx5/devices.h b/arch/arm/mach-mx5/devices.h
index e509cfaad1d..af1d07c0bbc 100644
--- a/arch/arm/mach-mx5/devices.h
+++ b/arch/arm/mach-mx5/devices.h
@@ -1,12 +1,6 @@
-extern struct platform_device mxc_uart_device0;
-extern struct platform_device mxc_uart_device1;
-extern struct platform_device mxc_uart_device2;
-extern struct platform_device mxc_fec_device;
 extern struct platform_device mxc_usbdr_host_device;
 extern struct platform_device mxc_usbh1_device;
 extern struct platform_device mxc_usbdr_udc_device;
 extern struct platform_device mxc_wdt;
-extern struct platform_device mxc_i2c_device0;
-extern struct platform_device mxc_i2c_device1;
 extern struct platform_device mxc_hsi2c_device;
 extern struct platform_device mxc_keypad_device;
diff --git a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
index ffa93d1d6ef..a2e6e8c39d2 100644
--- a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
+++ b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
@@ -30,6 +30,7 @@
 
 #include <asm/mach/arch.h>
 
+#include "devices-imx51.h"
 #include "devices.h"
 
 #define MBIMX51_TSC2007_GPIO	(2*32 + 30)
@@ -112,9 +113,25 @@ static struct pad_desc mbimx51_pads[] = {
 	MX51_PAD_KEY_COL1__KEY_COL1,
 	MX51_PAD_KEY_COL2__KEY_COL2,
 	MX51_PAD_KEY_COL3__KEY_COL3,
+
+	/* SD 1 */
+	MX51_PAD_SD1_CMD__SD1_CMD,
+	MX51_PAD_SD1_CLK__SD1_CLK,
+	MX51_PAD_SD1_DATA0__SD1_DATA0,
+	MX51_PAD_SD1_DATA1__SD1_DATA1,
+	MX51_PAD_SD1_DATA2__SD1_DATA2,
+	MX51_PAD_SD1_DATA3__SD1_DATA3,
+
+	/* SD 2 */
+	MX51_PAD_SD2_CMD__SD2_CMD,
+	MX51_PAD_SD2_CLK__SD2_CLK,
+	MX51_PAD_SD2_DATA0__SD2_DATA0,
+	MX51_PAD_SD2_DATA1__SD2_DATA1,
+	MX51_PAD_SD2_DATA2__SD2_DATA2,
+	MX51_PAD_SD2_DATA3__SD2_DATA3,
 };
 
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
@@ -158,9 +175,11 @@ struct tsc2007_platform_data tsc2007_data = {
 
 static struct i2c_board_info mbimx51_i2c_devices[] = {
 	{
-		I2C_BOARD_INFO("tsc2007", 0x48),
+		I2C_BOARD_INFO("tsc2007", 0x49),
 		.irq  = MBIMX51_TSC2007_IRQ,
 		.platform_data = &tsc2007_data,
+	}, {
+		I2C_BOARD_INFO("tlv320aic23", 0x1a),
 	},
 };
 
@@ -172,8 +191,8 @@ void __init eukrea_mbimx51_baseboard_init(void)
 	mxc_iomux_v3_setup_multiple_pads(mbimx51_pads,
 					ARRAY_SIZE(mbimx51_pads));
 
-	mxc_register_device(&mxc_uart_device1, NULL);
-	mxc_register_device(&mxc_uart_device2, &uart_pdata);
+	imx51_add_imx_uart(1, NULL);
+	imx51_add_imx_uart(2, &uart_pdata);
 
 	gpio_request(MBIMX51_LED0, "LED0");
 	gpio_direction_output(MBIMX51_LED0, 1);
@@ -197,4 +216,7 @@ void __init eukrea_mbimx51_baseboard_init(void)
 	set_irq_type(MBIMX51_TSC2007_IRQ, IRQF_TRIGGER_FALLING);
 	i2c_register_board_info(1, mbimx51_i2c_devices,
 				ARRAY_SIZE(mbimx51_i2c_devices));
+
+	imx51_add_esdhc(0, NULL);
+	imx51_add_esdhc(1, NULL);
 }
diff --git a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
new file mode 100644
index 00000000000..2b48f519083
--- /dev/null
+++ b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
@@ -0,0 +1,166 @@
+/*
+ * Copyright (C) 2010 Eric Benard - eric@eukrea.com
+ *
+ * Based on pcm970-baseboard.c which is :
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx51.h>
+#include <mach/audmux.h>
+
+#include "devices-imx51.h"
+#include "devices.h"
+
+#define MBIMXSD_GPIO_3_31 IOMUX_PAD(0x554, 0x16C, 3, 0x0, 0, \
+				MX51_PAD_CTRL_1 | PAD_CTL_PUS_22K_UP)
+
+static struct pad_desc eukrea_mbimxsd_pads[] = {
+	/* LED */
+	MX51_PAD_NANDF_D10__GPIO_3_30,
+	/* SWITCH */
+	MBIMXSD_GPIO_3_31,
+	/* UART2 */
+	MX51_PAD_UART2_RXD__UART2_RXD,
+	MX51_PAD_UART2_TXD__UART2_TXD,
+	/* UART 3 */
+	MX51_PAD_UART3_RXD__UART3_RXD,
+	MX51_PAD_UART3_TXD__UART3_TXD,
+	MX51_PAD_KEY_COL4__UART3_RTS,
+	MX51_PAD_KEY_COL5__UART3_CTS,
+	/* SD */
+	MX51_PAD_SD1_CMD__SD1_CMD,
+	MX51_PAD_SD1_CLK__SD1_CLK,
+	MX51_PAD_SD1_DATA0__SD1_DATA0,
+	MX51_PAD_SD1_DATA1__SD1_DATA1,
+	MX51_PAD_SD1_DATA2__SD1_DATA2,
+	MX51_PAD_SD1_DATA3__SD1_DATA3,
+};
+
+#define GPIO_LED1	(2 * 32 + 30)
+#define GPIO_SWITCH1	(2 * 32 + 31)
+
+static struct gpio_led eukrea_mbimxsd_leds[] = {
+	{
+		.name			= "led1",
+		.default_trigger	= "heartbeat",
+		.active_low		= 1,
+		.gpio			= GPIO_LED1,
+	},
+};
+
+static struct gpio_led_platform_data eukrea_mbimxsd_led_info = {
+	.leds		= eukrea_mbimxsd_leds,
+	.num_leds	= ARRAY_SIZE(eukrea_mbimxsd_leds),
+};
+
+static struct platform_device eukrea_mbimxsd_leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &eukrea_mbimxsd_led_info,
+	},
+};
+
+static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
+	{
+		.gpio		= GPIO_SWITCH1,
+		.code		= BTN_0,
+		.desc		= "BP1",
+		.active_low	= 1,
+		.wakeup		= 1,
+	},
+};
+
+static struct gpio_keys_platform_data eukrea_mbimxsd_button_data = {
+	.buttons	= eukrea_mbimxsd_gpio_buttons,
+	.nbuttons	= ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
+};
+
+static struct platform_device eukrea_mbimxsd_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &eukrea_mbimxsd_button_data,
+	}
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&eukrea_mbimxsd_leds_gpio,
+	&eukrea_mbimxsd_button_device,
+};
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("tlv320aic23", 0x1a),
+	},
+};
+
+/*
+ * system init for baseboard usage. Will be called by cpuimx51sd init.
+ *
+ * Add platform devices present on this baseboard and init
+ * them from CPU side as far as required to use them later on
+ */
+void __init eukrea_mbimxsd51_baseboard_init(void)
+{
+	if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
+			ARRAY_SIZE(eukrea_mbimxsd_pads)))
+		printk(KERN_ERR "error setting mbimxsd pads !\n");
+
+	imx51_add_imx_uart(1, NULL);
+	imx51_add_imx_uart(2, &uart_pdata);
+
+	imx51_add_esdhc(0, NULL);
+
+	gpio_request(GPIO_LED1, "LED1");
+	gpio_direction_output(GPIO_LED1, 1);
+	gpio_free(GPIO_LED1);
+
+	gpio_request(GPIO_SWITCH1, "SWITCH1");
+	gpio_direction_input(GPIO_SWITCH1);
+	gpio_free(GPIO_SWITCH1);
+
+	i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
+				ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
diff --git a/arch/arm/mach-mxc91231/magx-zn5.c b/arch/arm/mach-mxc91231/magx-zn5.c
index 69816ba8293..395d83be8c9 100644
--- a/arch/arm/mach-mxc91231/magx-zn5.c
+++ b/arch/arm/mach-mxc91231/magx-zn5.c
@@ -53,8 +53,6 @@ struct sys_timer zn5_timer = {
 };
 
 MACHINE_START(MAGX_ZN5, "Motorola Zn5")
-	.phys_io	= MXC91231_AIPS1_BASE_ADDR,
-	.io_pg_offst	= ((MXC91231_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params	= MXC91231_PHYS_OFFSET + 0x100,
 	.map_io		= mxc91231_map_io,
 	.init_irq	= mxc91231_init_irq,
diff --git a/arch/arm/mach-netx/include/mach/debug-macro.S b/arch/arm/mach-netx/include/mach/debug-macro.S
index e96339e71d8..56a91522818 100644
--- a/arch/arm/mach-netx/include/mach/debug-macro.S
+++ b/arch/arm/mach-netx/include/mach/debug-macro.S
@@ -13,12 +13,10 @@
 
 #include "hardware.h"
 
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x00100000		@ physical
-		movne	\rx, #io_p2v(0x00100000)	@ virtual
-		orr	\rx, \rx, #0x00000a00
+		.macro	addruart, rp, rv
+		mov	\rp, #0x00000a00
+		orr	\rv, \rp, #io_p2v(0x00100000)	@ virtual
+		orr	\rp, \rp, #0x00100000		@ physical
 		.endm
 
 		.macro	senduart,rd,rx
diff --git a/arch/arm/mach-netx/include/mach/vmalloc.h b/arch/arm/mach-netx/include/mach/vmalloc.h
index 25d5cc676e0..7cca3574308 100644
--- a/arch/arm/mach-netx/include/mach/vmalloc.h
+++ b/arch/arm/mach-netx/include/mach/vmalloc.h
@@ -16,4 +16,4 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
+#define VMALLOC_END       0xd0000000
diff --git a/arch/arm/mach-netx/nxdb500.c b/arch/arm/mach-netx/nxdb500.c
index c9b174bc8cc..ca8b203a3c9 100644
--- a/arch/arm/mach-netx/nxdb500.c
+++ b/arch/arm/mach-netx/nxdb500.c
@@ -200,8 +200,6 @@ static void __init nxdb500_init(void)
 }
 
 MACHINE_START(NXDB500, "Hilscher nxdb500")
-	.phys_io	= 0x00100000,
-	.io_pg_offst	= (io_p2v(0x00100000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= netx_map_io,
 	.init_irq	= netx_init_irq,
diff --git a/arch/arm/mach-netx/nxdkn.c b/arch/arm/mach-netx/nxdkn.c
index 15b54c62d60..d775cbe0727 100644
--- a/arch/arm/mach-netx/nxdkn.c
+++ b/arch/arm/mach-netx/nxdkn.c
@@ -93,8 +93,6 @@ static void __init nxdkn_init(void)
 }
 
 MACHINE_START(NXDKN, "Hilscher nxdkn")
-	.phys_io	= 0x00100000,
-	.io_pg_offst	= (io_p2v(0x00100000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= netx_map_io,
 	.init_irq	= netx_init_irq,
diff --git a/arch/arm/mach-netx/nxeb500hmi.c b/arch/arm/mach-netx/nxeb500hmi.c
index 1061c01ff67..de369cd1dcb 100644
--- a/arch/arm/mach-netx/nxeb500hmi.c
+++ b/arch/arm/mach-netx/nxeb500hmi.c
@@ -177,8 +177,6 @@ static void __init nxeb500hmi_init(void)
 }
 
 MACHINE_START(NXEB500HMI, "Hilscher nxeb500hmi")
-	.phys_io	= 0x00100000,
-	.io_pg_offst	= (io_p2v(0x00100000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= netx_map_io,
 	.init_irq	= netx_init_irq,
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 841d459ad59..139930350d9 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -276,8 +276,6 @@ static void __init nhk8815_platform_init(void)
 
 MACHINE_START(NOMADIK, "NHK8815")
 	/* Maintainer: ST MicroElectronics */
-	.phys_io	= NOMADIK_UART0_BASE,
-	.io_pg_offst	= (IO_ADDRESS(NOMADIK_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x100,
 	.map_io		= cpu8815_map_io,
 	.init_irq	= cpu8815_init_irq,
diff --git a/arch/arm/mach-nomadik/include/mach/debug-macro.S b/arch/arm/mach-nomadik/include/mach/debug-macro.S
index 4f92acfba95..e7151b4b888 100644
--- a/arch/arm/mach-nomadik/include/mach/debug-macro.S
+++ b/arch/arm/mach-nomadik/include/mach/debug-macro.S
@@ -10,13 +10,11 @@
  *
 */
 
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x10000000	@ physical base address
-		movne	\rx, #0xf0000000	@ virtual base
-		add	\rx, \rx, #0x00100000
-		add	\rx, \rx, #0x000fb000
+		.macro	addruart, rp, rv
+		mov	\rp, #0x00100000
+		add	\rp, \rp, #0x000fb000
+		add	\rv, \rp, #0xf0000000	@ virtual base
+		add	\rp, \rp, #0x10000000	@ physical base address
 		.endm
 
 #include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-ns9xxx/include/mach/debug-macro.S b/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
index 5c934bdb715..5a2acbdc3d6 100644
--- a/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
@@ -12,11 +12,9 @@
 
 #include <mach/regs-board-a9m9750dev.h>
 
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1
-		ldreq	\rx, =NS9XXX_CSxSTAT_PHYS(0)
-		ldrne	\rx, =io_p2v(NS9XXX_CSxSTAT_PHYS(0))
+		.macro	addruart, rp, rv
+		ldr	\rp, =NS9XXX_CSxSTAT_PHYS(0)
+		ldr	\rv, =io_p2v(NS9XXX_CSxSTAT_PHYS(0))
 		.endm
 
 #define UART_SHIFT	2
diff --git a/arch/arm/mach-nuc93x/mach-nuc932evb.c b/arch/arm/mach-nuc93x/mach-nuc932evb.c
index 9f79266f08e..d7025704248 100644
--- a/arch/arm/mach-nuc93x/mach-nuc932evb.c
+++ b/arch/arm/mach-nuc93x/mach-nuc932evb.c
@@ -35,8 +35,6 @@ static void __init nuc932evb_init(void)
 
 MACHINE_START(NUC932EVB, "NUC932EVB")
 	/* Maintainer: Wan ZongShun */
-	.phys_io	= NUC93X_PA_UART,
-	.io_pg_offst	= (((u32)NUC93X_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= 0,
 	.map_io		= nuc932evb_map_io,
 	.init_irq	= nuc93x_init_irq,
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 41992ab7196..73c86392fcd 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -297,8 +297,6 @@ static void __init ams_delta_map_io(void)
 
 MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
 	/* Maintainer: Jonathan McDowell <noodles@earth.li> */
-	.phys_io	= 0xfff00000,
-	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= ams_delta_map_io,
 	.reserve	= omap_reserve,
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 180ce79e5ea..149fdd32e12 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -386,8 +386,6 @@ static void __init omap_fsample_map_io(void)
 
 MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
 /* Maintainer: Brian Swetland <swetland@google.com> */
-	.phys_io	= 0xfff00000,
-	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= omap_fsample_map_io,
 	.reserve	= omap_reserve,
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index 93b9ab8fc3b..23f4ab9e265 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -94,8 +94,6 @@ static void __init omap_generic_map_io(void)
 
 MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
 	/* Maintainer: Tony Lindgren <tony@atomide.com> */
-	.phys_io	= 0xfff00000,
-	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= omap_generic_map_io,
 	.reserve	= omap_reserve,
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index d2cda58bcc4..197adb49dc5 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -458,8 +458,6 @@ static void __init h2_map_io(void)
 
 MACHINE_START(OMAP_H2, "TI-H2")
 	/* Maintainer: Imre Deak <imre.deak@nokia.com> */
-	.phys_io	= 0xfff00000,
-	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= h2_map_io,
 	.reserve	= omap_reserve,
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index c2ef4ff846c..9126e3e37b4 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -446,8 +446,6 @@ static void __init h3_map_io(void)
 
 MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
 	/* Maintainer: Texas Instruments, Inc. */
-	.phys_io	= 0xfff00000,
-	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= h3_map_io,
 	.reserve	= omap_reserve,
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index 311899ff5ff..86afb295222 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -300,8 +300,6 @@ static void __init htcherald_init_irq(void)
 MACHINE_START(HERALD, "HTC Herald")
 	/* Maintainer: Cory Maccarrone <darkstar6262@gmail.com> */
 	/* Maintainer: wing-linux.sourceforge.net */
-	.phys_io        = 0xfff00000,
-	.io_pg_offst    = ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params    = 0x10000100,
 	.map_io         = htcherald_map_io,
 	.reserve	= omap_reserve,
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 3daf87ad257..dc2b86fd66c 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -459,8 +459,6 @@ static void __init innovator_map_io(void)
 
 MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
 	/* Maintainer: MontaVista Software, Inc. */
-	.phys_io	= 0xfff00000,
-	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= innovator_map_io,
 	.reserve	= omap_reserve,
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 51a4539aecf..aa8375b2a0a 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -262,8 +262,6 @@ static void __init omap_nokia770_map_io(void)
 }
 
 MACHINE_START(NOKIA770, "Nokia 770")
-	.phys_io	= 0xfff00000,
-	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= omap_nokia770_map_io,
 	.reserve	= omap_reserve,
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 679740cc1e9..e9dd79149a8 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -580,8 +580,6 @@ static void __init osk_map_io(void)
 
 MACHINE_START(OMAP_OSK, "TI-OSK")
 	/* Maintainer: Dirk Behme <dirk.behme@de.bosch.com> */
-	.phys_io	= 0xfff00000,
-	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= osk_map_io,
 	.reserve	= omap_reserve,
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 782bb257a85..f32738b1eb6 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -285,8 +285,6 @@ static void __init omap_palmte_map_io(void)
 }
 
 MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
-	.phys_io	= 0xfff00000,
-	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= omap_palmte_map_io,
 	.reserve	= omap_reserve,
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 0b35ef54a64..ed1400a67f7 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -317,8 +317,6 @@ static void __init omap_palmtt_map_io(void)
 }
 
 MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T")
-	.phys_io	= 0xfff00000,
-	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= omap_palmtt_map_io,
 	.reserve	= omap_reserve,
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 66362903b6e..d7a245cef9a 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -338,8 +338,6 @@ omap_palmz71_map_io(void)
 }
 
 MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71")
-	.phys_io	= 0xfff00000,
-	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= omap_palmz71_map_io,
 	.reserve	= omap_reserve,
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 34ab354758b..a8d16a255c1 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -347,8 +347,6 @@ static void __init omap_perseus2_map_io(void)
 
 MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
 	/* Maintainer: Kevin Hilman <kjh@hilman.org> */
-	.phys_io	= 0xfff00000,
-	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= omap_perseus2_map_io,
 	.reserve	= omap_reserve,
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 2eb148b8de9..d25f59e5a77 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -419,8 +419,6 @@ static void __init omap_sx1_map_io(void)
 }
 
 MACHINE_START(SX1, "OMAP310 based Siemens SX1")
-	.phys_io	= 0xfff00000,
-	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= omap_sx1_map_io,
 	.reserve	= omap_reserve,
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 6b3cf14bc75..f5992c239bc 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -283,8 +283,6 @@ EXPORT_SYMBOL(voiceblue_wdt_ping);
 
 MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
 	/* Maintainer: Ladislav Michl <michl@2n.cz> */
-	.phys_io	= 0xfff00000,
-	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= voiceblue_map_io,
 	.reserve	= omap_reserve,
diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S
index 671408eb4ab..6a0fa046236 100644
--- a/arch/arm/mach-omap1/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap1/include/mach/debug-macro.S
@@ -28,56 +28,58 @@ omap_uart_virt:	.word	0x0
 		 * the desired UART phys and virt addresses temporarily into
 		 * the omap_uart_phys and omap_uart_virt above.
 		 */
-		.macro	addruart, rx, tmp
+		.macro	addruart, rp, rv
 
 		/* Use omap_uart_phys/virt if already configured */
-9:		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		ldreq	\rx, =__virt_to_phys(omap_uart_phys)	@ physical base address
-		ldrne	\rx, =omap_uart_virt	@ virtual base
-		ldr	\rx, [\rx, #0]
-		cmp	\rx, #0			@ is port configured?
+9:		mrc	p15, 0, \rp, c1, c0
+		tst	\rp, #1			@ MMU enabled?
+		ldreq	\rp, =__virt_to_phys(omap_uart_phys)	@ MMU not enabled
+		ldrne	\rp, =omap_uart_phys	@ MMU enabled
+		add	\rv, \rp, #4		@ omap_uart_virt
+		ldr	\rp, [\rp, #0]
+		ldr	\rv, [\rv, #0]
+		cmp	\rp, #0			@ is port configured?
+		cmpne	\rv, #0
 		bne	99f			@ already configured
 
 		/* Check the debug UART configuration set in uncompress.h */
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		ldreq	\rx, =OMAP_UART_INFO
-		ldrne	\rx, =__phys_to_virt(OMAP_UART_INFO)
-		ldr	\rx, [\rx, #0]
+		mrc	p15, 0, \rp, c1, c0
+		tst	\rp, #1			@ MMU enabled?
+		ldreq	\rp, =OMAP_UART_INFO	@ MMU not enabled
+		ldrne	\rp, =__phys_to_virt(OMAP_UART_INFO)	@ MMU enabled
+		ldr	\rp, [\rp, #0]
 
 		/* Select the UART to use based on the UART1 scratchpad value */
-10:		cmp	\rx, #0			@ no port configured?
+10:		cmp	\rp, #0			@ no port configured?
 		beq	11f			@ if none, try to use UART1
-		cmp	\rx, #OMAP1UART1
+		cmp	\rp, #OMAP1UART1
 		beq	11f			@ configure OMAP1UART1
-		cmp	\rx, #OMAP1UART2
+		cmp	\rp, #OMAP1UART2
 		beq	12f			@ configure OMAP1UART2
-		cmp	\rx, #OMAP1UART3
+		cmp	\rp, #OMAP1UART3
 		beq	13f			@ configure OMAP2UART3
 
 		/* Configure the UART offset from the phys/virt base */
-11:		mov	\rx, #0x00fb0000	@ OMAP1UART1
+11:		mov	\rp, #0x00fb0000	@ OMAP1UART1
 		b	98f
-12:		mov	\rx, #0x00fb0000	@ OMAP1UART1
-		orr	\rx, \rx, #0x00000800	@ OMAP1UART2
+12:		mov	\rp, #0x00fb0000	@ OMAP1UART1
+		orr	\rp, \rp, #0x00000800	@ OMAP1UART2
 		b	98f
-13:		mov	\rx, #0x00fb0000	@ OMAP1UART1
-		orr	\rx, \rx, #0x00000800	@ OMAP1UART2
-		orr	\rx, \rx, #0x00009000	@ OMAP1UART3
+13:		mov	\rp, #0x00fb0000	@ OMAP1UART1
+		orr	\rp, \rp, #0x00000800	@ OMAP1UART2
+		orr	\rp, \rp, #0x00009000	@ OMAP1UART3
 
 		/* Store both phys and virt address for the uart */
-98:		add	\rx, \rx, #0xff000000	@ phys base
-		mrc	p15, 0, \tmp, c1, c0
-		tst	\tmp, #1		@ MMU enabled?
-		ldreq	\tmp, =__virt_to_phys(omap_uart_phys)
-		ldrne	\tmp, =omap_uart_phys
-		str	\rx, [\tmp, #0]
-		sub	\rx, \rx, #0xff000000	@ phys base
-		add	\rx, \rx, #0xfe000000	@ virt base
-		ldreq	\tmp, =__virt_to_phys(omap_uart_virt)
-		ldrne	\tmp, =omap_uart_virt
-		str	\rx, [\tmp, #0]
+98:		add	\rp, \rp, #0xff000000	@ phys base
+		mrc	p15, 0, \rv, c1, c0
+		tst	\rv, #1			@ MMU enabled?
+		ldreq	\rv, =__virt_to_phys(omap_uart_phys)	@ MMU not enabled
+		ldrne	\rv, =omap_uart_phys	@ MMU enabled
+		str	\rp, [\rv, #0]
+		sub	\rp, \rp, #0xff000000	@ phys base
+		add	\rp, \rp, #0xfe000000	@ virt base
+		add	\rv, \rv, #4		@ omap_uart_lsr
+		str	\rp, [\rv, #0]
 		b	9b
 99:
 		.endm
diff --git a/arch/arm/mach-omap1/include/mach/vmalloc.h b/arch/arm/mach-omap1/include/mach/vmalloc.h
index 1b2af14df15..b001f67d695 100644
--- a/arch/arm/mach-omap1/include/mach/vmalloc.h
+++ b/arch/arm/mach-omap1/include/mach/vmalloc.h
@@ -17,4 +17,4 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  */
-#define VMALLOC_END	(PAGE_OFFSET + 0x18000000)
+#define VMALLOC_END	0xd8000000
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 8538e4131d2..b857ce48451 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -253,8 +253,6 @@ static void __init omap_2430sdp_map_io(void)
 
 MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
 	/* Maintainer: Syed Khasim - Texas Instruments Inc */
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_2430sdp_map_io,
 	.reserve	= omap_reserve,
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 67b95b5f1a2..a5b095cf2ad 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -817,8 +817,6 @@ static void __init omap_3430sdp_init(void)
 
 MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
 	/* Maintainer: Syed Khasim - Texas Instruments Inc */
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index b359c3f7bb3..fd27ac0860b 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -217,8 +217,6 @@ static void __init omap_sdp_init(void)
 }
 
 MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 9447644774c..0b6a65f3a10 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -458,8 +458,6 @@ static void __init omap_4430sdp_map_io(void)
 
 MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
 	/* Maintainer: Santosh Shilimkar - Texas Instruments Inc */
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_4430sdp_map_io,
 	.reserve	= omap_reserve,
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index 4d0f5859286..f85c8da17e8 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -462,8 +462,6 @@ static void __init am3517_evm_init(void)
 }
 
 MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index c6421a72514..68f07f5f441 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -356,8 +356,6 @@ static void __init omap_apollon_map_io(void)
 
 MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")
 	/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_apollon_map_io,
 	.reserve	= omap_reserve,
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index e10bc109415..934d9380c37 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -809,8 +809,6 @@ static void __init cm_t35_init(void)
 }
 
 MACHINE_START(CM_T35, "Compulab CM-T35")
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index a07086d6a0b..2205c20a4cd 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -800,8 +800,6 @@ static void __init devkit8000_init(void)
 }
 
 MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000")
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 3482b99e8c8..69064b1c6a7 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -54,8 +54,6 @@ static void __init omap_generic_map_io(void)
 
 MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx")
 	/* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_generic_map_io,
 	.reserve	= omap_reserve,
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index e09bd686389..cc39fc86652 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -376,8 +376,6 @@ static void __init omap_h4_map_io(void)
 
 MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
 	/* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_h4_map_io,
 	.reserve	= omap_reserve,
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 175f0433976..b62a68ba069 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -533,8 +533,6 @@ static void __init igep2_init(void)
 }
 
 MACHINE_START(IGEP0020, "IGEP v2 board")
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 00d9b13b01c..f28fd77bceb 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -442,8 +442,6 @@ static void __init omap_ldp_init(void)
 }
 
 MACHINE_START(OMAP_LDP, "OMAP LDP board")
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index a3e2b49aa39..3f796687350 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -674,8 +674,6 @@ static void __init n8x0_init_machine(void)
 }
 
 MACHINE_START(NOKIA_N800, "Nokia N800")
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= n8x0_map_io,
 	.reserve	= omap_reserve,
@@ -685,8 +683,6 @@ MACHINE_START(NOKIA_N800, "Nokia N800")
 MACHINE_END
 
 MACHINE_START(NOKIA_N810, "Nokia N810")
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= n8x0_map_io,
 	.reserve	= omap_reserve,
@@ -696,8 +692,6 @@ MACHINE_START(NOKIA_N810, "Nokia N810")
 MACHINE_END
 
 MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= n8x0_map_io,
 	.reserve	= omap_reserve,
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 87969c7df65..9d9f5b881ee 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -487,8 +487,6 @@ static void __init omap3_beagle_init(void)
 
 MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
 	/* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index f76d9c0a47a..8936e4fba33 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -714,8 +714,6 @@ static void __init omap3_evm_init(void)
 
 MACHINE_START(OMAP3EVM, "OMAP3 EVM")
 	/* Maintainer: Syed Mohammed Khasim - Texas Instruments */
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index dd3af2be13b..b7d6df4e3cf 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -717,8 +717,6 @@ static void __init omap3pandora_init(void)
 }
 
 MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console")
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index bcd01d278c6..bc5ac83bd4c 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -654,8 +654,6 @@ static void __init omap3_stalker_init(void)
 
 MACHINE_START(SBC3530, "OMAP3 STALKER")
 	/* Maintainer: Jason Lam -lzg@ema-tech.com */
-	.phys_io		= 0x48000000,
-	.io_pg_offst		= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params		= 0x80000100,
 	.map_io			= omap3_map_io,
 	.init_irq		= omap3_stalker_init_irq,
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 663c62d271e..0e99ce584db 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -538,8 +538,6 @@ static void __init omap3_touchbook_init(void)
 
 MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board")
 	/* Maintainer: Gregoire Gentil - http://www.alwaysinnovating.com */
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index c03d1d56db5..db69bcadf4c 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -294,8 +294,6 @@ static void __init omap4_panda_map_io(void)
 
 MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
 	/* Maintainer: David Anders - Texas Instruments Inc */
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap4_panda_map_io,
 	.init_irq	= omap4_panda_init_irq,
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 4c484361835..5e528ca015a 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -501,8 +501,6 @@ static void __init overo_init(void)
 }
 
 MACHINE_START(OVERO, "Gumstix Overo")
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index a58e8cb1a7f..36f2cf4efd5 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -150,8 +150,6 @@ static void __init rx51_map_io(void)
 
 MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
 	/* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= rx51_map_io,
 	.reserve	= omap_reserve,
diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
index 3ad9ecf7f5e..24bbd0def64 100644
--- a/arch/arm/mach-omap2/board-zoom2.c
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -141,8 +141,6 @@ static void __init omap_zoom2_init(void)
 }
 
 MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
-	.phys_io	= ZOOM_UART_BASE,
-	.io_pg_offst	= (ZOOM_UART_VIRT >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
diff --git a/arch/arm/mach-omap2/board-zoom3.c b/arch/arm/mach-omap2/board-zoom3.c
index 6ca0b834161..b2bb3ff971a 100644
--- a/arch/arm/mach-omap2/board-zoom3.c
+++ b/arch/arm/mach-omap2/board-zoom3.c
@@ -123,8 +123,6 @@ static void __init omap_zoom_init(void)
 }
 
 MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
-	.phys_io	= ZOOM_UART_BASE,
-	.io_pg_offst	= (ZOOM_UART_VIRT >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S
index 09331bbbda5..6a4d4136002 100644
--- a/arch/arm/mach-omap2/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap2/include/mach/debug-macro.S
@@ -31,95 +31,94 @@ omap_uart_lsr:	.word	0
 		 * the desired UART phys and virt addresses temporarily into
 		 * the omap_uart_phys and omap_uart_virt above.
 		 */
-		.macro	addruart, rx, tmp
+		.macro	addruart, rp, rv
 
 		/* Use omap_uart_phys/virt if already configured */
-10:		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		ldreq	\rx, =__virt_to_phys(omap_uart_phys)	@ physical base address
-		ldrne	\rx, =omap_uart_virt	@ virtual base address
-		ldr	\rx, [\rx, #0]
-		cmp	\rx, #0			@ is port configured?
+10:		mrc	p15, 0, \rp, c1, c0
+		tst	\rp, #1			@ MMU enabled?
+		ldreq	\rp, =__virt_to_phys(omap_uart_phys)	@ MMU not enabled
+		ldrne	\rp, =omap_uart_phys	@ MMU enabled
+		add	\rv, \rp, #4		@ omap_uart_virt
+		ldr	\rp, [\rp, #0]
+		ldr	\rv, [\rv, #0]
+		cmp	\rp, #0			@ is port configured?
+		cmpne	\rv, #0
 		bne	99f			@ already configured
 
 		/* Check the debug UART configuration set in uncompress.h */
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		ldreq	\rx, =OMAP_UART_INFO
-		ldrne	\rx, =__phys_to_virt(OMAP_UART_INFO)
-		ldr	\rx, [\rx, #0]
+		mrc	p15, 0, \rp, c1, c0
+		tst	\rp, #1			@ MMU enabled?
+		ldreq	\rp, =OMAP_UART_INFO	@ MMU not enabled
+		ldrne	\rp, =__phys_to_virt(OMAP_UART_INFO)	@ MMU enabled
+		ldr	\rp, [\rp, #0]
 
 		/* Select the UART to use based on the UART1 scratchpad value */
-		cmp	\rx, #0			@ no port configured?
+		cmp	\rp, #0			@ no port configured?
 		beq	21f			@ if none, try to use UART1
-		cmp	\rx, #OMAP2UART1	@ OMAP2/3/4UART1
+		cmp	\rp, #OMAP2UART1	@ OMAP2/3/4UART1
 		beq	21f			@ configure OMAP2/3/4UART1
-		cmp	\rx, #OMAP2UART2	@ OMAP2/3/4UART2
+		cmp	\rp, #OMAP2UART2	@ OMAP2/3/4UART2
 		beq	22f			@ configure OMAP2/3/4UART2
-		cmp	\rx, #OMAP2UART3	@ only on 24xx
+		cmp	\rp, #OMAP2UART3	@ only on 24xx
 		beq	23f			@ configure OMAP2UART3
-		cmp	\rx, #OMAP3UART3	@ only on 34xx
+		cmp	\rp, #OMAP3UART3	@ only on 34xx
 		beq	33f			@ configure OMAP3UART3
-		cmp	\rx, #OMAP4UART3	@ only on 44xx
+		cmp	\rp, #OMAP4UART3	@ only on 44xx
 		beq	43f			@ configure OMAP4UART3
-		cmp	\rx, #OMAP3UART4	@ only on 36xx
+		cmp	\rp, #OMAP3UART4	@ only on 36xx
 		beq	34f			@ configure OMAP3UART4
-		cmp	\rx, #OMAP4UART4	@ only on 44xx
+		cmp	\rp, #OMAP4UART4	@ only on 44xx
 		beq	44f			@ configure OMAP4UART4
-		cmp	\rx, #ZOOM_UART		@ only on zoom2/3
+		cmp	\rp, #ZOOM_UART		@ only on zoom2/3
 		beq	95f			@ configure ZOOM_UART
 
 		/* Configure the UART offset from the phys/virt base */
-21:		mov	\rx, #UART_OFFSET(OMAP2_UART1_BASE)	@ omap2/3/4
+21:		mov	\rp, #UART_OFFSET(OMAP2_UART1_BASE)	@ omap2/3/4
 		b	98f
-22:		mov	\rx, #UART_OFFSET(OMAP2_UART2_BASE)	@ omap2/3/4
+22:		mov	\rp, #UART_OFFSET(OMAP2_UART2_BASE)	@ omap2/3/4
 		b	98f
-23:		mov	\rx, #UART_OFFSET(OMAP2_UART3_BASE)
+23:		mov	\rp, #UART_OFFSET(OMAP2_UART3_BASE)
 		b	98f
-33:		mov	\rx, #UART_OFFSET(OMAP3_UART1_BASE)
-		add	\rx, \rx, #0x00fb0000
-		add	\rx, \rx, #0x00006000		@ OMAP3_UART3_BASE
+33:		mov	\rp, #UART_OFFSET(OMAP3_UART1_BASE)
+		add	\rp, \rp, #0x00fb0000
+		add	\rp, \rp, #0x00006000		@ OMAP3_UART3_BASE
 		b	98f
-34:		mov	\rx, #UART_OFFSET(OMAP3_UART1_BASE)
-		add	\rx, \rx, #0x00fb0000
-		add	\rx, \rx, #0x00028000		@ OMAP3_UART4_BASE
+34:		mov	\rp, #UART_OFFSET(OMAP3_UART1_BASE)
+		add	\rp, \rp, #0x00fb0000
+		add	\rp, \rp, #0x00028000		@ OMAP3_UART4_BASE
 		b	98f
-43:		mov	\rx, #UART_OFFSET(OMAP4_UART3_BASE)
+43:		mov	\rp, #UART_OFFSET(OMAP4_UART3_BASE)
 		b	98f
-44:		mov	\rx, #UART_OFFSET(OMAP4_UART4_BASE)
+44:		mov	\rp, #UART_OFFSET(OMAP4_UART4_BASE)
 		b	98f
-95:		ldr	\rx, =ZOOM_UART_BASE
-		mrc	p15, 0, \tmp, c1, c0
-		tst	\tmp, #1		@ MMU enabled?
-		ldreq	\tmp, =__virt_to_phys(omap_uart_phys)
-		ldrne	\tmp, =omap_uart_phys
-		str	\rx, [\tmp, #0]
-		ldr	\rx, =ZOOM_UART_VIRT
-		ldreq	\tmp, =__virt_to_phys(omap_uart_virt)
-		ldrne	\tmp, =omap_uart_virt
-		str	\rx, [\tmp, #0]
-		mov	\rx, #(UART_LSR << ZOOM_PORT_SHIFT)
-		ldreq	\tmp, =__virt_to_phys(omap_uart_lsr)
-		ldrne	\tmp, =omap_uart_lsr
-		str	\rx, [\tmp, #0]
+95:		ldr	\rp, =ZOOM_UART_BASE
+		mrc	p15, 0, \rv, c1, c0
+		tst	\rv, #1			@ MMU enabled?
+		ldreq	\rv, =__virt_to_phys(omap_uart_phys)	@ MMU not enabled
+		ldrne	\rv, =omap_uart_phys	@ MMU enabled
+		str	\rp, [\rv, #0]
+		ldr	\rp, =ZOOM_UART_VIRT
+		add	\rv, \rv, #4		@ omap_uart_virt
+		str	\rp, [\rv, #0]
+		mov	\rp, #(UART_LSR << ZOOM_PORT_SHIFT)
+		add	\rv, \rv, #4		@ omap_uart_lsr
+		str	\rp, [\rv, #0]
 		b	10b
 
 		/* Store both phys and virt address for the uart */
-98:		add	\rx, \rx, #0x48000000	@ phys base
-		mrc	p15, 0, \tmp, c1, c0
-		tst	\tmp, #1		@ MMU enabled?
-		ldreq	\tmp, =__virt_to_phys(omap_uart_phys)
-		ldrne	\tmp, =omap_uart_phys
-		str	\rx, [\tmp, #0]
-		sub	\rx, \rx, #0x48000000	@ phys base
-		add	\rx, \rx, #0xfa000000	@ virt base
-		ldreq	\tmp, =__virt_to_phys(omap_uart_virt)
-		ldrne	\tmp, =omap_uart_virt
-		str	\rx, [\tmp, #0]
-		mov	\rx, #(UART_LSR << OMAP_PORT_SHIFT)
-		ldreq	\tmp, =__virt_to_phys(omap_uart_lsr)
-		ldrne	\tmp, =omap_uart_lsr
-		str	\rx, [\tmp, #0]
+98:		add	\rp, \rp, #0x48000000	@ phys base
+		mrc	p15, 0, \rv, c1, c0
+		tst	\rv, #1			@ MMU enabled?
+		ldreq	\rv, =__virt_to_phys(omap_uart_phys)	@ MMU not enabled
+		ldrne	\rv, =omap_uart_phys	@ MMU enabled
+		str	\rp, [\rv, #0]
+		sub	\rp, \rp, #0x48000000	@ phys base
+		add	\rp, \rp, #0xfa000000	@ virt base
+		add	\rv, \rv, #4		@ omap_uart_virt
+		str	\rp, [\rv, #0]
+		mov	\rp, #(UART_LSR << OMAP_PORT_SHIFT)
+		add	\rv, \rv, #4		@ omap_uart_lsr
+		str	\rp, [\rv, #0]
 
 		b	10b
 99:
@@ -131,9 +130,9 @@ omap_uart_lsr:	.word	0
 
 		.macro	busyuart,rd,rx
 1001:		mrc	p15, 0, \rd, c1, c0
-		tst	\rd, #1		@ MMU enabled?
-		ldreq	\rd, =__virt_to_phys(omap_uart_lsr)
-		ldrne	\rd, =omap_uart_lsr
+		tst	\rd, #1			@ MMU enabled?
+		ldreq	\rd, =__virt_to_phys(omap_uart_lsr)	@ MMU not enabled
+		ldrne	\rd, =omap_uart_lsr	@ MMU enabled
 		ldr	\rd, [\rd, #0]
 		ldrb	\rd, [\rx, \rd]
 		and	\rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
diff --git a/arch/arm/mach-omap2/include/mach/vmalloc.h b/arch/arm/mach-omap2/include/mach/vmalloc.h
index 9ce9b6e8ad2..4da31e997ef 100644
--- a/arch/arm/mach-omap2/include/mach/vmalloc.h
+++ b/arch/arm/mach-omap2/include/mach/vmalloc.h
@@ -17,4 +17,4 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  */
-#define VMALLOC_END	  (PAGE_OFFSET + 0x38000000)
+#define VMALLOC_END	  0xf8000000
diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c
index 7130904ad99..b1c451f5ee2 100644
--- a/arch/arm/mach-orion5x/d2net-setup.c
+++ b/arch/arm/mach-orion5x/d2net-setup.c
@@ -336,8 +336,6 @@ static void __init d2net_init(void)
 
 #ifdef CONFIG_MACH_D2NET
 MACHINE_START(D2NET, "LaCie d2 Network")
-	.phys_io	= ORION5X_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.init_machine	= d2net_init,
 	.map_io		= orion5x_map_io,
@@ -349,8 +347,6 @@ MACHINE_END
 
 #ifdef CONFIG_MACH_BIGDISK
 MACHINE_START(BIGDISK, "LaCie Big Disk Network")
-	.phys_io	= ORION5X_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.init_machine	= d2net_init,
 	.map_io		= orion5x_map_io,
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
index d318bea2af9..df1083f5b6e 100644
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -358,8 +358,6 @@ static void __init db88f5281_init(void)
 
 MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board")
 	/* Maintainer: Tzachi Perelstein <tzachi@marvell.com> */
-	.phys_io	= ORION5X_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.init_machine	= db88f5281_init,
 	.map_io		= orion5x_map_io,
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index a47100d46a4..3a7bc0e3698 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -730,8 +730,6 @@ static void __init dns323_init(void)
 /* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */
 MACHINE_START(DNS323, "D-Link DNS-323")
 	/* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
-	.phys_io	= ORION5X_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.init_machine	= dns323_init,
 	.map_io		= orion5x_map_io,
diff --git a/arch/arm/mach-orion5x/edmini_v2-setup.c b/arch/arm/mach-orion5x/edmini_v2-setup.c
index b24ee0c2cd6..ba98459f44b 100644
--- a/arch/arm/mach-orion5x/edmini_v2-setup.c
+++ b/arch/arm/mach-orion5x/edmini_v2-setup.c
@@ -251,8 +251,6 @@ static void __init edmini_v2_init(void)
 /* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
 MACHINE_START(EDMINI_V2, "LaCie Ethernet Disk mini V2")
 	/* Maintainer: Christopher Moore <moore@free.fr> */
-	.phys_io	= ORION5X_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.init_machine	= edmini_v2_init,
 	.map_io		= orion5x_map_io,
diff --git a/arch/arm/mach-orion5x/include/mach/debug-macro.S b/arch/arm/mach-orion5x/include/mach/debug-macro.S
index 91e0e39bb23..5e3bf5b68ae 100644
--- a/arch/arm/mach-orion5x/include/mach/debug-macro.S
+++ b/arch/arm/mach-orion5x/include/mach/debug-macro.S
@@ -10,12 +10,11 @@
 
 #include <mach/orion5x.h>
 
-	.macro  addruart, rx, tmp
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1					@ MMU enabled?
-	ldreq	\rx, =ORION5X_REGS_PHYS_BASE
-	ldrne	\rx, =ORION5X_REGS_VIRT_BASE
-	orr	\rx, \rx, #0x00012000
+	.macro  addruart, rp, rv
+	ldr	\rp, =ORION5X_REGS_PHYS_BASE
+	ldr	\rv, =ORION5X_REGS_VIRT_BASE
+	orr	\rp, \rp, #0x00012000
+	orr	\rv, \rv, #0x00012000
 	.endm
 
 #define UART_SHIFT	2
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index dfbb68df7b0..4be9aa08de6 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -379,8 +379,6 @@ static void __init kurobox_pro_init(void)
 #ifdef CONFIG_MACH_KUROBOX_PRO
 MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro")
 	/* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
-	.phys_io	= ORION5X_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.init_machine	= kurobox_pro_init,
 	.map_io		= orion5x_map_io,
@@ -393,8 +391,6 @@ MACHINE_END
 #ifdef CONFIG_MACH_LINKSTATION_PRO
 MACHINE_START(LINKSTATION_PRO, "Buffalo Linkstation Pro/Live")
 	/* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */
-	.phys_io	= ORION5X_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.init_machine	= kurobox_pro_init,
 	.map_io		= orion5x_map_io,
diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c
index 8e569be6e2c..437364b7168 100644
--- a/arch/arm/mach-orion5x/ls_hgl-setup.c
+++ b/arch/arm/mach-orion5x/ls_hgl-setup.c
@@ -265,8 +265,6 @@ static void __init ls_hgl_init(void)
 
 MACHINE_START(LINKSTATION_LS_HGL, "Buffalo Linkstation LS-HGL")
 	/* Maintainer: Zhu Qingsen <zhuqs@cn.fujistu.com> */
-	.phys_io	= ORION5X_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.init_machine	= ls_hgl_init,
 	.map_io		= orion5x_map_io,
diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c
index c704f056de1..ab9b0cf0a90 100644
--- a/arch/arm/mach-orion5x/lsmini-setup.c
+++ b/arch/arm/mach-orion5x/lsmini-setup.c
@@ -267,8 +267,6 @@ static void __init lsmini_init(void)
 #ifdef CONFIG_MACH_LINKSTATION_MINI
 MACHINE_START(LINKSTATION_MINI, "Buffalo Linkstation Mini")
 	/* Maintainer: Alexey Kopytko <alexey@kopytko.ru> */
-	.phys_io	= ORION5X_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.init_machine	= lsmini_init,
 	.map_io		= orion5x_map_io,
diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c
index 61c086b6672..2f0e16cd7e8 100644
--- a/arch/arm/mach-orion5x/mss2-setup.c
+++ b/arch/arm/mach-orion5x/mss2-setup.c
@@ -261,8 +261,6 @@ static void __init mss2_init(void)
 
 MACHINE_START(MSS2, "Maxtor Shared Storage II")
 	/* Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> */
-	.phys_io	= ORION5X_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.init_machine	= mss2_init,
 	.map_io		= orion5x_map_io,
diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c
index 97c9ccb2ac6..b3d90f25de9 100644
--- a/arch/arm/mach-orion5x/mv2120-setup.c
+++ b/arch/arm/mach-orion5x/mv2120-setup.c
@@ -229,8 +229,6 @@ static void __init mv2120_init(void)
 /* Warning: HP uses a wrong mach-type (=526) in their bootloader */
 MACHINE_START(MV2120, "HP Media Vault mv2120")
 	/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
-	.phys_io	= ORION5X_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.init_machine	= mv2120_init,
 	.map_io		= orion5x_map_io,
diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c
index 7bd6283476f..d6665b31665 100644
--- a/arch/arm/mach-orion5x/net2big-setup.c
+++ b/arch/arm/mach-orion5x/net2big-setup.c
@@ -419,8 +419,6 @@ static void __init net2big_init(void)
 
 /* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
 MACHINE_START(NET2BIG, "LaCie 2Big Network")
-	.phys_io	= ORION5X_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.init_machine	= net2big_init,
 	.map_io		= orion5x_map_io,
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
index 9c1ca41730b..f4c26fd731f 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -169,8 +169,6 @@ subsys_initcall(rd88f5181l_fxo_pci_init);
 
 MACHINE_START(RD88F5181L_FXO, "Marvell Orion-VoIP FXO Reference Design")
 	/* Maintainer: Nicolas Pitre <nico@marvell.com> */
-	.phys_io	= ORION5X_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.init_machine	= rd88f5181l_fxo_init,
 	.map_io		= orion5x_map_io,
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index ee1399ff0ce..b5942909bab 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -181,8 +181,6 @@ subsys_initcall(rd88f5181l_ge_pci_init);
 
 MACHINE_START(RD88F5181L_GE, "Marvell Orion-VoIP GE Reference Design")
 	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-	.phys_io	= ORION5X_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.init_machine	= rd88f5181l_ge_init,
 	.map_io		= orion5x_map_io,
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index a04f9e4b633..165ed87029b 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -305,8 +305,6 @@ static void __init rd88f5182_init(void)
 
 MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design")
 	/* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
-	.phys_io	= ORION5X_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.init_machine	= rd88f5182_init,
 	.map_io		= orion5x_map_io,
diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
index 7737cf9a8f5..02ff45f3e2e 100644
--- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
@@ -123,8 +123,6 @@ subsys_initcall(rd88f6183ap_ge_pci_init);
 
 MACHINE_START(RD88F6183AP_GE, "Marvell Orion-1-90 AP GE Reference Design")
 	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-	.phys_io	= ORION5X_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.init_machine	= rd88f6183ap_ge_init,
 	.map_io		= orion5x_map_io,
diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c
index 0b101d7d41c..4403fae5ab0 100644
--- a/arch/arm/mach-orion5x/terastation_pro2-setup.c
+++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c
@@ -358,8 +358,6 @@ static void __init tsp2_init(void)
 
 MACHINE_START(TERASTATION_PRO2, "Buffalo Terastation Pro II/Live")
 	/* Maintainer:  Sylver Bruneau <sylver.bruneau@googlemail.com> */
-	.phys_io	= ORION5X_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.init_machine	= tsp2_init,
 	.map_io		= orion5x_map_io,
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index 9d689051419..1e196129d76 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -322,8 +322,6 @@ static void __init qnap_ts209_init(void)
 
 MACHINE_START(TS209, "QNAP TS-109/TS-209")
 	/* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */
-	.phys_io	= ORION5X_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.init_machine	= qnap_ts209_init,
 	.map_io		= orion5x_map_io,
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
index d85588ac7ef..428af2046e3 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -311,8 +311,6 @@ static void __init qnap_ts409_init(void)
 
 MACHINE_START(TS409, "QNAP TS-409")
 	/* Maintainer:  Sylver Bruneau <sylver.bruneau@gmail.com> */
-	.phys_io	= ORION5X_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.init_machine	= qnap_ts409_init,
 	.map_io		= orion5x_map_io,
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index 696b1a97f9e..16f1bd5324b 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -550,8 +550,6 @@ static void __init ts78xx_init(void)
 
 MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC")
 	/* Maintainer: Alexander Clouter <alex@digriz.org.uk> */
-	.phys_io	= ORION5X_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.init_machine	= ts78xx_init,
 	.map_io		= ts78xx_map_io,
diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
index 69208217b22..7994d6ec08a 100644
--- a/arch/arm/mach-orion5x/wnr854t-setup.c
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -172,8 +172,6 @@ subsys_initcall(wnr854t_pci_init);
 
 MACHINE_START(WNR854T, "Netgear WNR854T")
 	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-	.phys_io	= ORION5X_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.init_machine	= wnr854t_init,
 	.map_io		= orion5x_map_io,
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index f9f222ebb7e..a5989b7eb53 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -260,8 +260,6 @@ subsys_initcall(wrt350n_v2_pci_init);
 
 MACHINE_START(WRT350N_V2, "Linksys WRT350N v2")
 	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-	.phys_io	= ORION5X_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.init_machine	= wrt350n_v2_init,
 	.map_io		= orion5x_map_io,
diff --git a/arch/arm/mach-pnx4008/core.c b/arch/arm/mach-pnx4008/core.c
index 45734bb880a..63399755f19 100644
--- a/arch/arm/mach-pnx4008/core.c
+++ b/arch/arm/mach-pnx4008/core.c
@@ -264,8 +264,6 @@ extern struct sys_timer pnx4008_timer;
 
 MACHINE_START(PNX4008, "Philips PNX4008")
 	/* Maintainer: MontaVista Software Inc. */
-	.phys_io 		= 0x40090000,
-	.io_pg_offst 		= (0xf4090000 >> 18) & 0xfffc,
 	.boot_params		= 0x80000100,
 	.map_io 		= pnx4008_map_io,
 	.init_irq 		= pnx4008_init_irq,
diff --git a/arch/arm/mach-pnx4008/include/mach/debug-macro.S b/arch/arm/mach-pnx4008/include/mach/debug-macro.S
index 6ca8bd30bf4..931afebaf06 100644
--- a/arch/arm/mach-pnx4008/include/mach/debug-macro.S
+++ b/arch/arm/mach-pnx4008/include/mach/debug-macro.S
@@ -11,12 +11,10 @@
  *
 */
 
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		mov	\rx, #0x00090000
-		addeq	\rx, \rx, #0x40000000
-		addne	\rx, \rx, #0xf4000000
+		.macro	addruart, rp, rv
+		mov	\rp, #0x00090000
+		add	\rv, \rp, #0xf4000000	@ virtual
+		add	\rp, \rp, #0x40000000	@ physical
 		.endm
 
 #define UART_SHIFT	2
diff --git a/arch/arm/mach-pnx4008/include/mach/vmalloc.h b/arch/arm/mach-pnx4008/include/mach/vmalloc.h
index 2ad398378ae..31b65ee07b0 100644
--- a/arch/arm/mach-pnx4008/include/mach/vmalloc.h
+++ b/arch/arm/mach-pnx4008/include/mach/vmalloc.h
@@ -17,4 +17,4 @@
  * The vmalloc() routines leaves a hole of 4kB between each vmalloced
  * area for the same reason. ;)
  */
-#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
+#define VMALLOC_END       0xd0000000
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 7aefb907485..dd235ecc9d6 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -8,19 +8,16 @@ config ARCH_LUBBOCK
 	bool "Intel DBPXA250 Development Platform (aka Lubbock)"
 	select PXA25x
 	select SA1111
-	select PXA_HAVE_BOARD_IRQS
 
 config MACH_MAINSTONE
 	bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
 	select PXA27x
 	select HAVE_PWM
-	select PXA_HAVE_BOARD_IRQS
 
 config MACH_ZYLONITE
 	bool
 	select PXA3xx
 	select HAVE_PWM
-	select PXA_HAVE_BOARD_IRQS
 
 config MACH_ZYLONITE300
 	bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
@@ -44,6 +41,10 @@ config MACH_TAVOREVB
 	select PXA3xx
 	select CPU_PXA930
 
+config MACH_TAVOREVB3
+	bool "PXA95x Development Platform (aka TavorEVB III)"
+	select CPU_PXA950
+
 config MACH_SAAR
 	bool "PXA930 Handheld Platform (aka SAAR)"
 	select PXA3xx
@@ -61,7 +62,6 @@ config ARCH_VIPER
 	select ISA
 	select I2C_GPIO
 	select HAVE_PWM
-	select PXA_HAVE_BOARD_IRQS
 	select PXA_HAVE_ISA_IRQS
 	select ARCOM_PCMCIA
 
@@ -69,7 +69,6 @@ config MACH_ARCOM_ZEUS
 	bool "Arcom/Eurotech ZEUS SBC"
 	select PXA27x
 	select ISA
-	select PXA_HAVE_BOARD_IRQS
 	select PXA_HAVE_ISA_IRQS
 	select ARCOM_PCMCIA
 
@@ -77,7 +76,6 @@ config MACH_BALLOON3
 	bool "Balloon 3 board"
 	select PXA27x
 	select IWMMXT
-	select PXA_HAVE_BOARD_IRQS
 
 config MACH_CSB726
 	bool "Enable Cogent CSB726 System On a Module"
@@ -140,13 +138,11 @@ config MACH_INTELMOTE2
 	bool "Intel Mote 2 Platform"
 	select PXA27x
 	select IWMMXT
-	select PXA_HAVE_BOARD_IRQS
 
 config MACH_STARGATE2
 	bool "Intel Stargate 2 Platform"
 	select PXA27x
 	select IWMMXT
-	select PXA_HAVE_BOARD_IRQS
 
 config MACH_XCEP
 	bool "Iskratel Electronics XCEP"
@@ -206,13 +202,11 @@ config MACH_LOGICPD_PXA270
 	bool "LogicPD PXA270 Card Engine Development Platform"
 	select PXA27x
 	select HAVE_PWM
-	select PXA_HAVE_BOARD_IRQS
 
 config MACH_PCM027
 	bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
 	select PXA27x
 	select IWMMXT
-	select PXA_HAVE_BOARD_IRQS
 
 config MACH_PCM990_BASEBOARD
 	bool "PHYTEC PCM-990 development board"
@@ -247,7 +241,6 @@ config MACH_COLIBRI_PXA270_INCOME
 	depends on MACH_COLIBRI
 	select PXA27x
 	select HAVE_PWM
-	select PXA_HAVE_BOARD_IRQS
 
 config MACH_COLIBRI300
 	bool "Toradex Colibri PXA300/310"
@@ -274,7 +267,6 @@ config MACH_H4700
 	select PXA27x
 	select IWMMXT
 	select HAVE_PWM
-	select PXA_HAVE_BOARD_IRQS
 
 config MACH_H5000
 	bool "HP iPAQ h5000"
@@ -289,7 +281,6 @@ config MACH_MAGICIAN
 	select PXA27x
 	select IWMMXT
 	select HAVE_PWM
-	select PXA_HAVE_BOARD_IRQS
 
 config MACH_MIOA701
 	bool "Mitac Mio A701 Support"
@@ -307,7 +298,6 @@ config PXA_EZX
 	select PXA27x
 	select IWMMXT
 	select HAVE_PWM
-	select PXA_HAVE_BOARD_IRQS
 
 config MACH_EZX_A780
 	bool "Motorola EZX A780"
@@ -478,7 +468,6 @@ config MACH_POODLE
 	depends on PXA_SHARPSL
 	select PXA25x
 	select SHARP_LOCOMO
-	select PXA_HAVE_BOARD_IRQS
 
 config MACH_CORGI
 	bool "Enable Sharp SL-C700 (Corgi) Support"
@@ -523,7 +512,6 @@ config MACH_TOSA
 	bool "Enable Sharp SL-6000x (Tosa) Support"
 	depends on PXA_SHARPSL
 	select PXA25x
-	select PXA_HAVE_BOARD_IRQS
 
 config TOSA_BT
 	tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
@@ -552,7 +540,6 @@ config MACH_ICONTROL
 config ARCH_PXA_ESERIES
 	bool "PXA based Toshiba e-series PDAs"
 	select PXA25x
-	select PXA_HAVE_BOARD_IRQS
 
 config MACH_E330
 	bool "Toshiba e330"
@@ -606,7 +593,6 @@ config MACH_ZIPIT2
 	bool "Zipit Z2 Handheld"
 	select PXA27x
 	select HAVE_PWM
-	select PXA_HAVE_BOARD_IRQS
 
 endmenu
 
@@ -643,6 +629,7 @@ config CPU_PXA300
 config CPU_PXA310
 	bool
 	select CPU_PXA300
+	select PXA310_ULPI if USB_ULPI
 	help
 	  PXA310 (codename Monahans-LV)
 
@@ -692,10 +679,10 @@ config SHARPSL_PM_MAX1111
 	select HWMON
 	select SENSORS_MAX1111
 
-config PXA_HAVE_BOARD_IRQS
+config PXA_HAVE_ISA_IRQS
 	bool
 
-config PXA_HAVE_ISA_IRQS
+config PXA310_ULPI
 	bool
 
 endif
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 85c7fb324db..e2f89c2c6f4 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -18,7 +18,7 @@ endif
 # SoC-specific code
 obj-$(CONFIG_PXA25x)		+= mfp-pxa2xx.o pxa2xx.o pxa25x.o
 obj-$(CONFIG_PXA27x)		+= mfp-pxa2xx.o pxa2xx.o pxa27x.o
-obj-$(CONFIG_PXA3xx)		+= mfp-pxa3xx.o pxa3xx.o smemc.o
+obj-$(CONFIG_PXA3xx)		+= mfp-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o
 obj-$(CONFIG_CPU_PXA300)	+= pxa300.o
 obj-$(CONFIG_CPU_PXA320)	+= pxa320.o
 obj-$(CONFIG_CPU_PXA930)	+= pxa930.o
@@ -32,6 +32,7 @@ obj-$(CONFIG_MACH_ZYLONITE300)	+= zylonite.o zylonite_pxa300.o
 obj-$(CONFIG_MACH_ZYLONITE320)	+= zylonite.o zylonite_pxa320.o
 obj-$(CONFIG_MACH_LITTLETON)	+= littleton.o
 obj-$(CONFIG_MACH_TAVOREVB)	+= tavorevb.o
+obj-$(CONFIG_MACH_TAVOREVB3)	+= tavorevb3.o
 obj-$(CONFIG_MACH_SAAR)		+= saar.o
 
 # 3rd Party Dev Platforms
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index 9041340fee1..21e18890193 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -68,42 +68,6 @@ static unsigned long balloon3_pin_config[] __initdata = {
 
 	/* Reset, configured as GPIO wakeup source */
 	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
-
-	/* LEDs */
-	GPIO9_GPIO,	/* NAND activity LED */
-	GPIO10_GPIO,	/* Heartbeat LED */
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO113_AC97_nRESET,
-	GPIO95_GPIO,
-
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-
-	/* USB Host */
-	GPIO88_USBH1_PWR,
-	GPIO89_USBH1_PEN,
-
-	/* PC Card */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO85_nPCE_1,
-	GPIO54_nPCE_2,
-	GPIO79_PSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
 };
 
 /******************************************************************************
@@ -132,6 +96,34 @@ int __init parse_balloon3_features(char *arg)
 early_param("balloon3_features", parse_balloon3_features);
 
 /******************************************************************************
+ * Compact Flash slot
+ ******************************************************************************/
+#if	defined(CONFIG_PCMCIA_PXA2XX) || defined(CONFIG_PCMCIA_PXA2XX_MODULE)
+static unsigned long balloon3_cf_pin_config[] __initdata = {
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO85_nPCE_1,
+	GPIO54_nPCE_2,
+	GPIO79_PSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+};
+
+static void __init balloon3_cf_init(void)
+{
+	if (!balloon3_has(BALLOON3_FEATURE_CF))
+		return;
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_cf_pin_config));
+}
+#else
+static inline void balloon3_cf_init(void) {}
+#endif
+
+/******************************************************************************
  * NOR Flash
  ******************************************************************************/
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
@@ -179,6 +171,15 @@ static inline void balloon3_nor_init(void) {}
  ******************************************************************************/
 #if	defined(CONFIG_TOUCHSCREEN_UCB1400) || \
 	defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
+static unsigned long balloon3_ac97_pin_config[] __initdata = {
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+	GPIO113_AC97_nRESET,
+	GPIO95_GPIO,
+};
+
 static struct ucb1400_pdata vpac270_ucb1400_pdata = {
 	.irq		= IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ),
 };
@@ -197,6 +198,7 @@ static void __init balloon3_ts_init(void)
 	if (!balloon3_has(BALLOON3_FEATURE_AUDIO))
 		return;
 
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_ac97_pin_config));
 	pxa_set_ac97_info(NULL);
 	platform_device_register(&balloon3_ucb1400_device);
 }
@@ -208,6 +210,11 @@ static inline void balloon3_ts_init(void) {}
  * Framebuffer
  ******************************************************************************/
 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static unsigned long balloon3_lcd_pin_config[] __initdata = {
+	GPIOxx_LCD_TFT_16BPP,
+	GPIO99_GPIO,
+};
+
 static struct pxafb_mode_info balloon3_lcd_modes[] = {
 	{
 		.pixclock		= 38000,
@@ -242,6 +249,8 @@ static void __init balloon3_lcd_init(void)
 	if (!balloon3_has(BALLOON3_FEATURE_TOPPOLY))
 		return;
 
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_lcd_pin_config));
+
 	ret = gpio_request(BALLOON3_GPIO_RUN_BACKLIGHT, "BKL-ON");
 	if (ret) {
 		pr_err("Requesting BKL-ON GPIO failed!\n");
@@ -271,6 +280,15 @@ static inline void balloon3_lcd_init(void) {}
  * SD/MMC card controller
  ******************************************************************************/
 #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static unsigned long balloon3_mmc_pin_config[] __initdata = {
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+};
+
 static struct pxamci_platform_data balloon3_mci_platform_data = {
 	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
 	.gpio_card_detect	= -1,
@@ -281,6 +299,7 @@ static struct pxamci_platform_data balloon3_mci_platform_data = {
 
 static void __init balloon3_mmc_init(void)
 {
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_mmc_pin_config));
 	pxa_set_mci_info(&balloon3_mci_platform_data);
 }
 #else
@@ -339,6 +358,11 @@ static inline void balloon3_irda_init(void) {}
  * USB Host
  ******************************************************************************/
 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static unsigned long balloon3_uhc_pin_config[] __initdata = {
+	GPIO88_USBH1_PWR,
+	GPIO89_USBH1_PEN,
+};
+
 static struct pxaohci_platform_data balloon3_ohci_info = {
 	.port_mode	= PMM_PERPORT_MODE,
 	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
@@ -348,6 +372,7 @@ static void __init balloon3_uhc_init(void)
 {
 	if (!balloon3_has(BALLOON3_FEATURE_OHCI))
 		return;
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_uhc_pin_config));
 	pxa_set_ohci_info(&balloon3_ohci_info);
 }
 #else
@@ -358,6 +383,11 @@ static inline void balloon3_uhc_init(void) {}
  * LEDs
  ******************************************************************************/
 #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+static unsigned long balloon3_led_pin_config[] __initdata = {
+	GPIO9_GPIO,	/* NAND activity LED */
+	GPIO10_GPIO,	/* Heartbeat LED */
+};
+
 struct gpio_led balloon3_gpio_leds[] = {
 	{
 		.name			= "balloon3:green:idle",
@@ -436,6 +466,7 @@ static struct platform_device balloon3_pcf_leds = {
 
 static void __init balloon3_leds_init(void)
 {
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_led_pin_config));
 	platform_device_register(&balloon3_leds);
 	platform_device_register(&balloon3_pcf_leds);
 }
@@ -757,6 +788,7 @@ static void __init balloon3_init(void)
 	balloon3_ts_init();
 	balloon3_udc_init();
 	balloon3_uhc_init();
+	balloon3_cf_init();
 }
 
 static struct map_desc balloon3_io_desc[] __initdata = {
@@ -776,9 +808,8 @@ static void __init balloon3_map_io(void)
 
 MACHINE_START(BALLOON3, "Balloon3")
 	/* Maintainer: Nick Bane. */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io		= balloon3_map_io,
+	.nr_irqs	= BALLOON3_NR_IRQS,
 	.init_irq	= balloon3_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= balloon3_init,
diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c
index aae544631a8..4bd7a3cda48 100644
--- a/arch/arm/mach-pxa/capc7117.c
+++ b/arch/arm/mach-pxa/capc7117.c
@@ -148,9 +148,7 @@ static void __init capc7117_init(void)
 
 MACHINE_START(CAPC7117,
 	      "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM")
-	.phys_io = 0x40000000,
 	.boot_params = 0xa0000100,
-	.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io = pxa_map_io,
 	.init_irq = pxa3xx_init_irq,
 	.timer = &pxa_timer,
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index bff6e78f033..ac5598ce972 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -33,6 +33,9 @@
 extern void cmx255_init(void);
 extern void cmx270_init(void);
 
+/* reserve IRQs for IT8152 */
+#define CMX2XX_NR_IRQS		(IRQ_BOARD_START + 40)
+
 /* virtual addresses for statically mapped regions */
 #define CMX2XX_VIRT_BASE	(0xe8000000)
 #define CMX2XX_IT8152_VIRT	(CMX2XX_VIRT_BASE)
@@ -511,9 +514,8 @@ static void __init cmx2xx_map_io(void)
 
 MACHINE_START(ARMCORE, "Compulab CM-X2XX")
 	.boot_params	= 0xa0000100,
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io		= cmx2xx_map_io,
+	.nr_irqs	= CMX2XX_NR_IRQS,
 	.init_irq	= cmx2xx_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= cmx2xx_init,
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index c70e6c2f4e7..922b1075b9d 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -19,6 +19,7 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
+#include <linux/clk.h>
 
 #include <linux/gpio.h>
 #include <linux/dm9000.h>
@@ -50,6 +51,7 @@
 #include <plat/i2c.h>
 #include <plat/pxa3xx_nand.h>
 #include <mach/audio.h>
+#include <mach/pxa3xx-u2d.h>
 
 #include <asm/mach/map.h>
 
@@ -68,6 +70,8 @@
 #define GPIO97_RTC_RD		(97)
 #define GPIO98_RTC_IO		(98)
 
+#define GPIO_ULPI_PHY_RST	(127)
+
 static mfp_cfg_t cm_x3xx_mfp_cfg[] __initdata = {
 	/* LCD */
 	GPIO54_LCD_LDD_0,
@@ -472,6 +476,78 @@ static void __init cm_x300_init_mmc(void)
 static inline void cm_x300_init_mmc(void) {}
 #endif
 
+#if defined(CONFIG_PXA310_ULPI)
+static struct clk *pout_clk;
+
+static int cm_x300_ulpi_phy_reset(void)
+{
+	int err;
+
+	/* reset the PHY */
+	err = gpio_request(GPIO_ULPI_PHY_RST, "ulpi reset");
+	if (err) {
+		pr_err("%s: failed to request ULPI reset GPIO: %d\n",
+		       __func__, err);
+		return err;
+	}
+
+	gpio_direction_output(GPIO_ULPI_PHY_RST, 0);
+	msleep(10);
+	gpio_set_value(GPIO_ULPI_PHY_RST, 1);
+	msleep(10);
+
+	gpio_free(GPIO_ULPI_PHY_RST);
+
+	return 0;
+}
+
+static inline int cm_x300_u2d_init(struct device *dev)
+{
+	int err = 0;
+
+	if (cpu_is_pxa310()) {
+		/* CLK_POUT is connected to the ULPI PHY */
+		pout_clk = clk_get(NULL, "CLK_POUT");
+		if (IS_ERR(pout_clk)) {
+			err = PTR_ERR(pout_clk);
+			pr_err("%s: failed to get CLK_POUT: %d\n",
+			       __func__, err);
+			return err;
+		}
+		clk_enable(pout_clk);
+
+		err = cm_x300_ulpi_phy_reset();
+		if (err) {
+			clk_disable(pout_clk);
+			clk_put(pout_clk);
+		}
+	}
+
+	return err;
+}
+
+static void cm_x300_u2d_exit(struct device *dev)
+{
+	if (cpu_is_pxa310()) {
+		clk_disable(pout_clk);
+		clk_put(pout_clk);
+	}
+}
+
+static struct pxa3xx_u2d_platform_data cm_x300_u2d_platform_data = {
+	.ulpi_mode	= ULPI_SER_6PIN,
+	.init		= cm_x300_u2d_init,
+	.exit		= cm_x300_u2d_exit,
+};
+
+static void cm_x300_init_u2d(void)
+{
+	pxa3xx_set_u2d_info(&cm_x300_u2d_platform_data);
+}
+#else
+static inline void cm_x300_init_u2d(void) {}
+#endif
+
 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 static int cm_x300_ohci_init(struct device *dev)
 {
@@ -754,6 +830,7 @@ static void __init cm_x300_init(void)
 	cm_x300_init_da9030();
 	cm_x300_init_dm9000();
 	cm_x300_init_lcd();
+	cm_x300_init_u2d();
 	cm_x300_init_ohci();
 	cm_x300_init_mmc();
 	cm_x300_init_nand();
@@ -779,9 +856,7 @@ static void __init cm_x300_fixup(struct machine_desc *mdesc, struct tag *tags,
 }
 
 MACHINE_START(CM_X300, "CM-X300 module")
-	.phys_io	= 0x40000000,
 	.boot_params	= 0xa0000100,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io		= pxa_map_io,
 	.init_irq	= pxa3xx_init_irq,
 	.timer		= &pxa_timer,
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index 98673ac6efd..bc045100ec1 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -207,8 +207,6 @@ static void __init colibri_pxa270_income_init(void)
 }
 
 MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= COLIBRI_SDRAM_BASE + 0x100,
 	.init_machine	= colibri_pxa270_init,
 	.map_io		= pxa_map_io,
@@ -217,8 +215,6 @@ MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
 MACHINE_END
 
 MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC")
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
 	.init_machine	= colibri_pxa270_income_init,
 	.map_io		= pxa_map_io,
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index 40b6ac2de87..a70b256591e 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -186,8 +186,6 @@ void __init colibri_pxa300_init(void)
 }
 
 MACHINE_START(COLIBRI300, "Toradex Colibri PXA300")
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= COLIBRI_SDRAM_BASE + 0x100,
 	.init_machine	= colibri_pxa300_init,
 	.map_io		= pxa_map_io,
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index 99e850d8471..ca5f29e2e9c 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -255,8 +255,6 @@ void __init colibri_pxa320_init(void)
 }
 
 MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= COLIBRI_SDRAM_BASE + 0x100,
 	.init_machine	= colibri_pxa320_init,
 	.map_io		= pxa_map_io,
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 3fb0fc09908..821229acabe 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -720,8 +720,6 @@ static void __init fixup_corgi(struct machine_desc *desc,
 
 #ifdef CONFIG_MACH_CORGI
 MACHINE_START(CORGI, "SHARP Corgi")
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.fixup		= fixup_corgi,
 	.map_io		= pxa_map_io,
 	.init_irq	= pxa25x_init_irq,
@@ -732,8 +730,6 @@ MACHINE_END
 
 #ifdef CONFIG_MACH_SHEPHERD
 MACHINE_START(SHEPHERD, "SHARP Shepherd")
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.fixup		= fixup_corgi,
 	.map_io		= pxa_map_io,
 	.init_irq	= pxa25x_init_irq,
@@ -744,8 +740,6 @@ MACHINE_END
 
 #ifdef CONFIG_MACH_HUSKY
 MACHINE_START(HUSKY, "SHARP Husky")
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.fixup		= fixup_corgi,
 	.map_io		= pxa_map_io,
 	.init_irq	= pxa25x_init_irq,
diff --git a/arch/arm/mach-pxa/cpufreq-pxa3xx.c b/arch/arm/mach-pxa/cpufreq-pxa3xx.c
index 0a0d0fe9922..88fbec05ec5 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa3xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa3xx.c
@@ -159,7 +159,7 @@ static int pxa3xx_cpufreq_verify(struct cpufreq_policy *policy)
 
 static unsigned int pxa3xx_cpufreq_get(unsigned int cpu)
 {
-	return get_clk_frequency_khz(0);
+	return pxa3xx_get_clk_frequency_khz(0);
 }
 
 static int pxa3xx_cpufreq_set(struct cpufreq_policy *policy,
@@ -212,7 +212,8 @@ static int pxa3xx_cpufreq_init(struct cpufreq_policy *policy)
 	policy->cpuinfo.min_freq = 104000;
 	policy->cpuinfo.max_freq = (cpu_is_pxa320()) ? 806000 : 624000;
 	policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */
-	policy->cur = policy->min = policy->max = get_clk_frequency_khz(0);
+	policy->max = pxa3xx_get_clk_frequency_khz(0);
+	policy->cur = policy->min = policy->max;
 
 	if (cpu_is_pxa300() || cpu_is_pxa310())
 		ret = setup_freqs_table(policy, ARRAY_AND_SIZE(pxa300_freqs));
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
index 91fd4fea6a5..57cacaff194 100644
--- a/arch/arm/mach-pxa/csb726.c
+++ b/arch/arm/mach-pxa/csb726.c
@@ -272,9 +272,7 @@ static void __init csb726_init(void)
 }
 
 MACHINE_START(CSB726, "Cogent CSB726")
-	.phys_io	= 0x40000000,
 	.boot_params	= 0xa0000100,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io         = pxa_map_io,
 	.init_irq       = pxa27x_init_irq,
 	.init_machine   = csb726_init,
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 65447dc736c..08b41034387 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -6,11 +6,12 @@
 
 #include <asm/pmu.h>
 #include <mach/udc.h>
+#include <mach/pxa3xx-u2d.h>
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
 #include <mach/irda.h>
 #include <mach/ohci.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <mach/pxa2xx_spi.h>
 #include <mach/camera.h>
 #include <mach/audio.h>
@@ -134,6 +135,33 @@ struct platform_device pxa27x_device_udc = {
 	}
 };
 
+#ifdef CONFIG_PXA3xx
+static struct resource pxa3xx_u2d_resources[] = {
+	[0] = {
+		.start	= 0x54100000,
+		.end	= 0x54100fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_USB2,
+		.end	= IRQ_USB2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device pxa3xx_device_u2d = {
+	.name		= "pxa3xx-u2d",
+	.id		= -1,
+	.resource	= pxa3xx_u2d_resources,
+	.num_resources	= ARRAY_SIZE(pxa3xx_u2d_resources),
+};
+
+void __init pxa3xx_set_u2d_info(struct pxa3xx_u2d_platform_data *info)
+{
+	pxa_register_device(&pxa3xx_device_u2d, info);
+}
+#endif /* CONFIG_PXA3xx */
+
 static struct resource pxafb_resources[] = {
 	[0] = {
 		.start	= 0x44000000,
diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h
index 50353ea49ba..715e8bd02e2 100644
--- a/arch/arm/mach-pxa/devices.h
+++ b/arch/arm/mach-pxa/devices.h
@@ -4,6 +4,7 @@ extern struct platform_device pxa3xx_device_mci2;
 extern struct platform_device pxa3xx_device_mci3;
 extern struct platform_device pxa25x_device_udc;
 extern struct platform_device pxa27x_device_udc;
+extern struct platform_device pxa3xx_device_u2d;
 extern struct platform_device pxa_device_fb;
 extern struct platform_device pxa_device_ffuart;
 extern struct platform_device pxa_device_btuart;
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 0517c17978f..ab48bb81b57 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -43,7 +43,7 @@
 #include <mach/pxafb.h>
 #include <mach/ohci.h>
 #include <mach/mmc.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <plat/i2c.h>
 #include <mach/camera.h>
 #include <mach/pxa2xx_spi.h>
@@ -1301,8 +1301,6 @@ static void __init em_x270_init(void)
 
 MACHINE_START(EM_X270, "Compulab EM-X270")
 	.boot_params	= 0xa0000100,
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io		= pxa_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.timer		= &pxa_timer,
@@ -1311,8 +1309,6 @@ MACHINE_END
 
 MACHINE_START(EXEDA, "Compulab eXeda")
 	.boot_params	= 0xa0000100,
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io		= pxa_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.timer		= &pxa_timer,
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index 349212a1cbd..b25690ccadc 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -29,6 +29,7 @@
 
 #include <mach/pxa25x.h>
 #include <mach/eseries-gpio.h>
+#include <mach/eseries-irq.h>
 #include <mach/audio.h>
 #include <mach/pxafb.h>
 #include <mach/udc.h>
@@ -179,10 +180,9 @@ static void __init e330_init(void)
 
 MACHINE_START(E330, "Toshiba e330")
 	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
 	.map_io		= pxa_map_io,
+	.nr_irqs	= ESERIES_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
 	.fixup		= eseries_fixup,
 	.init_machine	= e330_init,
@@ -229,10 +229,9 @@ static void __init e350_init(void)
 
 MACHINE_START(E350, "Toshiba e350")
 	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
 	.map_io		= pxa_map_io,
+	.nr_irqs	= ESERIES_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
 	.fixup		= eseries_fixup,
 	.init_machine	= e350_init,
@@ -352,10 +351,9 @@ static void __init e400_init(void)
 
 MACHINE_START(E400, "Toshiba e400")
 	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
 	.map_io		= pxa_map_io,
+	.nr_irqs	= ESERIES_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
 	.fixup		= eseries_fixup,
 	.init_machine	= e400_init,
@@ -541,10 +539,9 @@ static void __init e740_init(void)
 
 MACHINE_START(E740, "Toshiba e740")
 	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
 	.map_io		= pxa_map_io,
+	.nr_irqs	= ESERIES_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
 	.fixup		= eseries_fixup,
 	.init_machine	= e740_init,
@@ -733,10 +730,9 @@ static void __init e750_init(void)
 
 MACHINE_START(E750, "Toshiba e750")
 	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
 	.map_io		= pxa_map_io,
+	.nr_irqs	= ESERIES_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
 	.fixup		= eseries_fixup,
 	.init_machine	= e750_init,
@@ -929,10 +925,9 @@ static void __init e800_init(void)
 
 MACHINE_START(E800, "Toshiba e800")
 	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
 	.map_io		= pxa_map_io,
+	.nr_irqs	= ESERIES_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
 	.fixup		= eseries_fixup,
 	.init_machine	= e800_init,
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index 626c82b1397..80a9352d43f 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -32,12 +32,14 @@
 #include <mach/ohci.h>
 #include <plat/i2c.h>
 #include <mach/hardware.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <mach/camera.h>
 
 #include "devices.h"
 #include "generic.h"
 
+#define EZX_NR_IRQS			(IRQ_BOARD_START + 24)
+
 #define GPIO12_A780_FLIP_LID 		12
 #define GPIO15_A1200_FLIP_LID 		15
 #define GPIO15_A910_FLIP_LID 		15
@@ -796,10 +798,9 @@ static void __init a780_init(void)
 }
 
 MACHINE_START(EZX_A780, "Motorola EZX A780")
-	.phys_io        = 0x40000000,
-	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params    = 0xa0000100,
 	.map_io         = pxa_map_io,
+	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = a780_init,
@@ -862,10 +863,9 @@ static void __init e680_init(void)
 }
 
 MACHINE_START(EZX_E680, "Motorola EZX E680")
-	.phys_io        = 0x40000000,
-	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params    = 0xa0000100,
 	.map_io         = pxa_map_io,
+	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = e680_init,
@@ -928,10 +928,9 @@ static void __init a1200_init(void)
 }
 
 MACHINE_START(EZX_A1200, "Motorola EZX A1200")
-	.phys_io        = 0x40000000,
-	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params    = 0xa0000100,
 	.map_io         = pxa_map_io,
+	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = a1200_init,
@@ -1120,10 +1119,9 @@ static void __init a910_init(void)
 }
 
 MACHINE_START(EZX_A910, "Motorola EZX A910")
-	.phys_io        = 0x40000000,
-	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params    = 0xa0000100,
 	.map_io         = pxa_map_io,
+	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = a910_init,
@@ -1186,10 +1184,9 @@ static void __init e6_init(void)
 }
 
 MACHINE_START(EZX_E6, "Motorola EZX E6")
-	.phys_io        = 0x40000000,
-	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params    = 0xa0000100,
 	.map_io         = pxa_map_io,
+	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = e6_init,
@@ -1226,10 +1223,9 @@ static void __init e2_init(void)
 }
 
 MACHINE_START(EZX_E2, "Motorola EZX E2")
-	.phys_io        = 0x40000000,
-	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params    = 0xa0000100,
 	.map_io         = pxa_map_io,
+	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = e2_init,
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index baabb3ce088..6451e9c3a93 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -66,8 +66,7 @@ unsigned int get_clk_frequency_khz(int info)
 		return pxa25x_get_clk_frequency_khz(info);
 	else if (cpu_is_pxa27x())
 		return pxa27x_get_clk_frequency_khz(info);
-	else
-		return pxa3xx_get_clk_frequency_khz(info);
+	return 0;
 }
 EXPORT_SYMBOL(get_clk_frequency_khz);
 
@@ -80,8 +79,7 @@ unsigned int get_memclk_frequency_10khz(void)
 		return pxa25x_get_memclk_frequency_10khz();
 	else if (cpu_is_pxa27x())
 		return pxa27x_get_memclk_frequency_10khz();
-	else
-		return pxa3xx_get_memclk_frequency_10khz();
+	return 0;
 }
 EXPORT_SYMBOL(get_memclk_frequency_10khz);
 
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index c6305c5b8a7..4b1ad2769ed 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -54,11 +54,9 @@ static inline void pxa2xx_clear_reset_status(unsigned int mask) {}
 
 #ifdef CONFIG_PXA3xx
 extern unsigned pxa3xx_get_clk_frequency_khz(int);
-extern unsigned pxa3xx_get_memclk_frequency_10khz(void);
 extern void pxa3xx_clear_reset_status(unsigned int);
 #else
 #define pxa3xx_get_clk_frequency_khz(x)		(0)
-#define pxa3xx_get_memclk_frequency_10khz()	(0)
 static inline void pxa3xx_clear_reset_status(unsigned int mask) {}
 #endif
 
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index 96c34512913..1e2a9a13aec 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -224,9 +224,7 @@ static void __init gumstix_init(void)
 }
 
 MACHINE_START(GUMSTIX, "Gumstix")
-	.phys_io	= 0x40000000,
 	.boot_params	= 0xa0000100, /* match u-boot bi_boot_params */
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io		= pxa_map_io,
 	.init_irq	= pxa25x_init_irq,
 	.timer		= &pxa_timer,
diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c
index c1cab0871c9..7057a1f46db 100644
--- a/arch/arm/mach-pxa/h5000.c
+++ b/arch/arm/mach-pxa/h5000.c
@@ -201,8 +201,6 @@ static void __init h5000_init(void)
 }
 
 MACHINE_START(H5400, "HP iPAQ H5000")
-	.phys_io = 0x40000000,
-	.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params = 0xa0000100,
 	.map_io = pxa_map_io,
 	.init_irq = pxa25x_init_irq,
diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c
index f9a2e4b0f09..01b7f07ebad 100644
--- a/arch/arm/mach-pxa/himalaya.c
+++ b/arch/arm/mach-pxa/himalaya.c
@@ -159,8 +159,6 @@ static void __init himalaya_init(void)
 
 
 MACHINE_START(HIMALAYA, "HTC Himalaya")
-	.phys_io = 0x40000000,
-	.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params = 0xa0000100,
 	.map_io = pxa_map_io,
 	.init_irq = pxa25x_init_irq,
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index 848c861dd23..76d93a25bab 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -870,10 +870,9 @@ static void __init hx4700_init(void)
 }
 
 MACHINE_START(H4700, "HP iPAQ HX4700")
-	.phys_io      = 0x40000000,
-	.io_pg_offst  = (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params  = 0xa0000100,
 	.map_io       = pxa_map_io,
+	.nr_irqs      = HX4700_NR_IRQS,
 	.init_irq     = pxa27x_init_irq,
 	.init_machine = hx4700_init,
 	.timer        = &pxa_timer,
diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
index 5ccb0ceff6c..d51ee3d25e7 100644
--- a/arch/arm/mach-pxa/icontrol.c
+++ b/arch/arm/mach-pxa/icontrol.c
@@ -191,9 +191,7 @@ static void __init icontrol_init(void)
 }
 
 MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM")
-	.phys_io	= 0x40000000,
 	.boot_params	= 0xa0000100,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io		= pxa_map_io,
 	.init_irq	= pxa3xx_init_irq,
 	.timer		= &pxa_timer,
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index bc78c4dc0c6..e773dceeabc 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -194,8 +194,6 @@ static void __init idp_map_io(void)
 
 MACHINE_START(PXA_IDP, "Vibren PXA255 IDP")
 	/* Maintainer: Vibren Technologies */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io		= idp_map_io,
 	.init_irq	= pxa25x_init_irq,
 	.timer		= &pxa_timer,
diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h
index eec92e6fd7c..561562b4360 100644
--- a/arch/arm/mach-pxa/include/mach/balloon3.h
+++ b/arch/arm/mach-pxa/include/mach/balloon3.h
@@ -174,6 +174,8 @@ enum balloon3_features {
 #define BALLOON3_CODEC_IRQ	IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ)
 #define BALLOON3_S0_CD_IRQ	IRQ_GPIO(BALLOON3_GPIO_S0_CD)
 
+#define BALLOON3_NR_IRQS	(IRQ_BOARD_START + 4)
+
 extern int balloon3_has(enum balloon3_features feature);
 
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/debug-macro.S b/arch/arm/mach-pxa/include/mach/debug-macro.S
index 01cf81393fe..7d5c75125d6 100644
--- a/arch/arm/mach-pxa/include/mach/debug-macro.S
+++ b/arch/arm/mach-pxa/include/mach/debug-macro.S
@@ -13,12 +13,10 @@
 
 #include "hardware.h"
 
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x40000000		@ physical
-		movne	\rx, #io_p2v(0x40000000)	@ virtual
-		orr	\rx, \rx, #0x00100000
+		.macro	addruart, rp, rv
+		mov	\rp, #0x00100000
+		orr	\rv, \rp, #io_p2v(0x40000000)	@ virtual
+		orr	\rp, \rp, #0x40000000		@ physical
 		.endm
 
 #define UART_SHIFT	2
diff --git a/arch/arm/mach-pxa/include/mach/eseries-irq.h b/arch/arm/mach-pxa/include/mach/eseries-irq.h
index f2a93d5e31d..de292b269c6 100644
--- a/arch/arm/mach-pxa/include/mach/eseries-irq.h
+++ b/arch/arm/mach-pxa/include/mach/eseries-irq.h
@@ -25,3 +25,4 @@
 #define TMIO_SD_IRQ     IRQ_TMIO(1)
 #define TMIO_USB_IRQ    IRQ_TMIO(2)
 
+#define ESERIES_NR_IRQS	(IRQ_BOARD_START + 16)
diff --git a/arch/arm/mach-pxa/include/mach/hx4700.h b/arch/arm/mach-pxa/include/mach/hx4700.h
index 9eaeed1f87f..37408449ec2 100644
--- a/arch/arm/mach-pxa/include/mach/hx4700.h
+++ b/arch/arm/mach-pxa/include/mach/hx4700.h
@@ -17,6 +17,7 @@
 
 #define HX4700_ASIC3_GPIO_BASE	NR_BUILTIN_GPIO
 #define HX4700_EGPIO_BASE	(HX4700_ASIC3_GPIO_BASE + ASIC3_NUM_GPIOS)
+#define HX4700_NR_IRQS		(IRQ_BOARD_START + 70)
 
 /*
  * PXA GPIOs
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
index ffc8314520f..d372caa75dc 100644
--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -117,48 +117,12 @@
 /*
  * The following interrupts are for board specific purposes. Since
  * the kernel can only run on one machine at a time, we can re-use
- * these.  There will be 16 IRQs by default.  If it is not enough,
- * IRQ_BOARD_END is allowed be customized for each board, but keep
- * the numbers within sensible limits and in descending order, so
- * when multiple config options are selected, the maximum will be
- * used.
+ * these.
+ * By default, no board IRQ is reserved. It should be finished in
+ * custom board since sparse IRQ is already enabled.
  */
 #define IRQ_BOARD_START		(PXA_GPIO_IRQ_BASE + PXA_GPIO_IRQ_NUM)
 
-#if defined(CONFIG_MACH_H4700)
-#define IRQ_BOARD_END		(IRQ_BOARD_START + 70)
-#elif defined(CONFIG_MACH_ZYLONITE)
-#define IRQ_BOARD_END		(IRQ_BOARD_START + 32)
-#elif defined(CONFIG_PXA_EZX)
-#define IRQ_BOARD_END		(IRQ_BOARD_START + 23)
-#else
-#define IRQ_BOARD_END		(IRQ_BOARD_START + 16)
-#endif
-
-/*
- * Figure out the MAX IRQ number.
- *
- * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1.
- * If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1
- * Otherwise, we have the standard IRQs only.
- */
-#ifdef CONFIG_SA1111
-#define NR_IRQS			(IRQ_BOARD_END + 55)
-#elif defined(CONFIG_PXA_HAVE_BOARD_IRQS)
-#define NR_IRQS			(IRQ_BOARD_END)
-#else
 #define NR_IRQS			(IRQ_BOARD_START)
-#endif
-
-/* add IT8152 IRQs beyond BOARD_END */
-#ifdef CONFIG_PCI_HOST_ITE8152
-#define IT8152_LAST_IRQ         (IRQ_BOARD_END + 40)
-
-#if NR_IRQS < (IT8152_LAST_IRQ+1)
-#undef NR_IRQS
-#define NR_IRQS (IT8152_LAST_IRQ+1)
-#endif
-
-#endif /* CONFIG_PCI_HOST_ITE8152 */
 
 #endif /* __ASM_MACH_IRQS_H */
diff --git a/arch/arm/mach-pxa/include/mach/littleton.h b/arch/arm/mach-pxa/include/mach/littleton.h
index 6c9b21c5132..2a5726c15e0 100644
--- a/arch/arm/mach-pxa/include/mach/littleton.h
+++ b/arch/arm/mach-pxa/include/mach/littleton.h
@@ -10,4 +10,6 @@
 #define EXT0_GPIO_BASE	(NR_BUILTIN_GPIO)
 #define EXT0_GPIO(x)	(EXT0_GPIO_BASE + (x))
 
+#define LITTLETON_NR_IRQS	(IRQ_BOARD_START + 8)
+
 #endif /* __ASM_ARCH_LITTLETON_H */
diff --git a/arch/arm/mach-pxa/include/mach/lpd270.h b/arch/arm/mach-pxa/include/mach/lpd270.h
index 0e6440c8168..cd070092b6e 100644
--- a/arch/arm/mach-pxa/include/mach/lpd270.h
+++ b/arch/arm/mach-pxa/include/mach/lpd270.h
@@ -38,5 +38,6 @@
 #define LPD270_USBC_IRQ		LPD270_IRQ(2)
 #define LPD270_ETHERNET_IRQ	LPD270_IRQ(3)
 #define LPD270_AC97_IRQ		LPD270_IRQ(4)
+#define LPD270_NR_IRQS		(IRQ_BOARD_START + 5)
 
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/lubbock.h b/arch/arm/mach-pxa/include/mach/lubbock.h
index a0d4247f08f..2a086e8373e 100644
--- a/arch/arm/mach-pxa/include/mach/lubbock.h
+++ b/arch/arm/mach-pxa/include/mach/lubbock.h
@@ -45,6 +45,9 @@
 #define LUBBOCK_USB_DISC_IRQ	LUBBOCK_IRQ(6)  /* usb disconnect */
 #define LUBBOCK_LAST_IRQ	LUBBOCK_IRQ(6)
 
+#define LUBBOCK_SA1111_IRQ_BASE	(IRQ_BOARD_START + 16)
+#define LUBBOCK_NR_IRQS		(IRQ_BOARD_START + 16 + 55)
+
 #ifndef __ASSEMBLY__
 extern void lubbock_set_misc_wr(unsigned int mask, unsigned int set);
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/include/mach/magician.h
index 20ef37d4a9a..0a2efcf7947 100644
--- a/arch/arm/mach-pxa/include/mach/magician.h
+++ b/arch/arm/mach-pxa/include/mach/magician.h
@@ -71,6 +71,8 @@
 #define IRQ_MAGICIAN_BT		(IRQ_BOARD_START + 2)
 #define IRQ_MAGICIAN_VBUS	(IRQ_BOARD_START + 3)
 
+#define MAGICIAN_NR_IRQS	(IRQ_BOARD_START + 8)
+
 /*
  * CPLD EGPIOs
  */
diff --git a/arch/arm/mach-pxa/include/mach/mainstone.h b/arch/arm/mach-pxa/include/mach/mainstone.h
index 86e623abd64..4c2d11cd824 100644
--- a/arch/arm/mach-pxa/include/mach/mainstone.h
+++ b/arch/arm/mach-pxa/include/mach/mainstone.h
@@ -134,4 +134,6 @@
 #define MAINSTONE_S1_STSCHG_IRQ	MAINSTONE_IRQ(14)
 #define MAINSTONE_S1_IRQ	MAINSTONE_IRQ(15)
 
+#define MAINSTONE_NR_IRQS	(IRQ_BOARD_START + 16)
+
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa930.h b/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
index 0d119d3b922..04f7c97044f 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
@@ -69,6 +69,7 @@
 #define nBE0_GPIO_60		MFP_CFG(nBE0, AF0)
 #define nBE1_GPIO_61		MFP_CFG(nBE1, AF0)
 #define RDY_GPIO_62		MFP_CFG(RDY, AF0)
+#define PMIC_INT_GPIO83		MFP_CFG_LPM(PMIC_INT, AF0, PULL_HIGH)
 
 /* Chip Select */
 #define DF_nCS0_nCS2		MFP_CFG_LPM(DF_nCS0, AF3, PULL_HIGH)
@@ -92,6 +93,9 @@
 #define GPIO63_CI2C_SCL		MFP_CFG_LPM(GPIO63, AF4, PULL_HIGH)
 #define GPIO64_CI2C_SDA		MFP_CFG_LPM(GPIO64, AF4, PULL_HIGH)
 
+#define GPIO73_CI2C_SCL		MFP_CFG_LPM(GPIO73, AF1, PULL_HIGH)
+#define GPIO74_CI2C_SDA		MFP_CFG_LPM(GPIO74, AF1, PULL_HIGH)
+
 #define GPIO77_CI2C_SCL		MFP_CFG_LPM(GPIO77, AF2, PULL_HIGH)
 #define GPIO78_CI2C_SDA		MFP_CFG_LPM(GPIO78, AF2, PULL_HIGH)
 
@@ -345,6 +349,9 @@
 #define GPIO69_UART1_CTS	MFP_CFG(GPIO69, AF2)
 #define GPIO70_UART1_RTS	MFP_CFG(GPIO70, AF2)
 
+#define GPIO53_UART1_TXD	MFP_CFG(GPIO53, AF2)
+#define GPIO54_UART1_RXD	MFP_CFG(GPIO54, AF2)
+
 /* UART2 - BTUART */
 #define GPIO91_UART2_RXD	MFP_CFG(GPIO91, AF1)
 #define GPIO92_UART2_TXD	MFP_CFG(GPIO92, AF1)
diff --git a/arch/arm/mach-pxa/include/mach/pcm027.h b/arch/arm/mach-pxa/include/mach/pcm027.h
index 04083263167..4bac588478a 100644
--- a/arch/arm/mach-pxa/include/mach/pcm027.h
+++ b/arch/arm/mach-pxa/include/mach/pcm027.h
@@ -30,6 +30,8 @@
 #define PCM027_MMCDET_IRQ      PCM027_IRQ(2)
 #define PCM027_PM_5V_IRQ       PCM027_IRQ(3)
 
+#define PCM027_NR_IRQS		(IRQ_BOARD_START + 32)
+
 /* I2C RTC */
 #define PCM027_RTC_IRQ_GPIO	0
 #define PCM027_RTC_IRQ		IRQ_GPIO(PCM027_RTC_IRQ_GPIO)
diff --git a/arch/arm/mach-pxa/include/mach/poodle.h b/arch/arm/mach-pxa/include/mach/poodle.h
index 0b3e6d051c6..83d1cfd00fc 100644
--- a/arch/arm/mach-pxa/include/mach/poodle.h
+++ b/arch/arm/mach-pxa/include/mach/poodle.h
@@ -85,6 +85,8 @@
 #define POODLE_LOCOMO_GPIO_232VCC_ON   LOCOMO_GPIO(12)
 #define POODLE_LOCOMO_GPIO_JK_B        LOCOMO_GPIO(13)
 
+#define POODLE_NR_IRQS		(IRQ_BOARD_START + 4)	/* 4 for LoCoMo */
+
 extern struct platform_device poodle_locomo_device;
 
 #endif /* __ASM_ARCH_POODLE_H  */
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-u2d.h b/arch/arm/mach-pxa/include/mach/pxa3xx-u2d.h
new file mode 100644
index 00000000000..9d82cb65ea5
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa3xx-u2d.h
@@ -0,0 +1,35 @@
+/*
+ * PXA3xx U2D header
+ *
+ * Copyright (C) 2010 CompuLab Ltd.
+ *
+ * Igor Grinberg <grinberg@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __PXA310_U2D__
+#define __PXA310_U2D__
+
+#include <linux/usb/ulpi.h>
+
+struct pxa3xx_u2d_platform_data {
+
+#define ULPI_SER_6PIN	(1 << 0)
+#define ULPI_SER_3PIN	(1 << 1)
+	unsigned int ulpi_mode;
+
+	int (*init)(struct device *);
+	void (*exit)(struct device *);
+};
+
+
+/* Start PXA3xx U2D host */
+int pxa3xx_u2d_start_hc(struct usb_bus *host);
+/* Stop PXA3xx U2D host */
+void pxa3xx_u2d_stop_hc(struct usb_bus *host);
+
+extern void pxa3xx_set_u2d_info(struct pxa3xx_u2d_platform_data *info);
+
+#endif /* __PXA310_U2D__ */
diff --git a/arch/arm/mach-pxa/include/mach/tosa.h b/arch/arm/mach-pxa/include/mach/tosa.h
index 1bbd1f2e4be..1272c4b56ce 100644
--- a/arch/arm/mach-pxa/include/mach/tosa.h
+++ b/arch/arm/mach-pxa/include/mach/tosa.h
@@ -20,6 +20,7 @@
 /* Jacket Scoop */
 #define TOSA_SCOOP_PHYS  	(PXA_CS5_PHYS + 0x00800000)
 
+#define TOSA_NR_IRQS		(IRQ_BOARD_START + TC6393XB_NR_IRQS)
 /*
  * SCOOP2 internal GPIOs
  */
diff --git a/arch/arm/mach-pxa/include/mach/zeus.h b/arch/arm/mach-pxa/include/mach/zeus.h
index 6e119976003..faa408ab7ad 100644
--- a/arch/arm/mach-pxa/include/mach/zeus.h
+++ b/arch/arm/mach-pxa/include/mach/zeus.h
@@ -15,6 +15,8 @@
 #ifndef _MACH_ZEUS_H
 #define _MACH_ZEUS_H
 
+#define ZEUS_NR_IRQS		(IRQ_BOARD_START + 48)
+
 /* Physical addresses */
 #define ZEUS_FLASH_PHYS		PXA_CS0_PHYS
 #define ZEUS_ETH0_PHYS		PXA_CS1_PHYS
diff --git a/arch/arm/mach-pxa/include/mach/zylonite.h b/arch/arm/mach-pxa/include/mach/zylonite.h
index 9edf645368d..ea24998b923 100644
--- a/arch/arm/mach-pxa/include/mach/zylonite.h
+++ b/arch/arm/mach-pxa/include/mach/zylonite.h
@@ -5,6 +5,8 @@
 
 #define EXT_GPIO(x)		(128 + (x))
 
+#define ZYLONITE_NR_IRQS	(IRQ_BOARD_START + 32)
+
 /* the following variables are processor specific and initialized
  * by the corresponding zylonite_pxa3xx_init()
  */
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 9b9046185b0..41aa89e3577 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -43,7 +43,7 @@
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
 #include <mach/pxa2xx_spi.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <mach/littleton.h>
 #include <plat/i2c.h>
 #include <plat/pxa3xx_nand.h>
@@ -437,10 +437,9 @@ static void __init littleton_init(void)
 }
 
 MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)")
-	.phys_io	= 0x40000000,
 	.boot_params	= 0xa0000100,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io		= pxa_map_io,
+	.nr_irqs	= LITTLETON_NR_IRQS,
 	.init_irq	= pxa3xx_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= littleton_init,
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index d279507fc74..623af0232a5 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -505,10 +505,9 @@ static void __init lpd270_map_io(void)
 
 MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine")
 	/* Maintainer: Peter Barada */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
 	.map_io		= lpd270_map_io,
+	.nr_irqs	= LPD270_NR_IRQS,
 	.init_irq	= lpd270_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= lpd270_init,
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 330c3282856..1499493cd07 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -229,7 +229,7 @@ static struct resource sa1111_resources[] = {
 };
 
 static struct sa1111_platform_data sa1111_info = {
-	.irq_base	= IRQ_BOARD_END,
+	.irq_base	= LUBBOCK_SA1111_IRQ_BASE,
 };
 
 static struct platform_device sa1111_device = {
@@ -557,9 +557,8 @@ static void __init lubbock_map_io(void)
 
 MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)")
 	/* Maintainer: MontaVista Software Inc. */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io		= lubbock_map_io,
+	.nr_irqs	= LUBBOCK_NR_IRQS,
 	.init_irq	= lubbock_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= lubbock_init,
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index e81dd0c8e40..90663760307 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -764,10 +764,9 @@ static void __init magician_init(void)
 
 
 MACHINE_START(MAGICIAN, "HTC Magician")
-	.phys_io = 0x40000000,
-	.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params = 0xa0000100,
 	.map_io = pxa_map_io,
+	.nr_irqs = MAGICIAN_NR_IRQS,
 	.init_irq = pxa27x_init_irq,
 	.init_machine = magician_init,
 	.timer = &pxa_timer,
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 5543c64da9e..a980a5c93e4 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -50,7 +50,7 @@
 #include <mach/mmc.h>
 #include <mach/irda.h>
 #include <mach/ohci.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -624,10 +624,9 @@ static void __init mainstone_map_io(void)
 
 MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
 	/* Maintainer: MontaVista Software Inc. */
-	.phys_io	= 0x40000000,
 	.boot_params	= 0xa0000100,	/* BLOB boot parameter setting */
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io		= mainstone_map_io,
+	.nr_irqs	= MAINSTONE_NR_IRQS,
 	.init_irq	= mainstone_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= mainstone_init,
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index dc66942ef9a..0c31fabfc7f 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -45,7 +45,7 @@
 
 #include <mach/pxa27x.h>
 #include <mach/regs-rtc.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
 #include <mach/udc.h>
@@ -819,8 +819,6 @@ static void mioa701_machine_exit(void)
 }
 
 MACHINE_START(MIOA701, "MIO A701")
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
 	.map_io		= &pxa_map_io,
 	.init_irq	= &pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c
index 6d4503927a7..116167aaba6 100644
--- a/arch/arm/mach-pxa/mp900.c
+++ b/arch/arm/mach-pxa/mp900.c
@@ -92,9 +92,7 @@ static void __init mp900c_init(void)
 
 /* Maintainer - Michael Petchkovsky <mkpetch@internode.on.net> */
 MACHINE_START(NEC_MP900, "MobilePro900/C")
-	.phys_io	= 0x40000000,
 	.boot_params	= 0xa0220100,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.timer		= &pxa_timer,
 	.map_io		= pxa_map_io,
 	.init_irq	= pxa25x_init_irq,
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 91038eeafe4..ce092c521e6 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -39,7 +39,7 @@
 #include <mach/mmc.h>
 #include <mach/pxafb.h>
 #include <mach/irda.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <mach/palmasoc.h>
 #include <mach/palm27x.h>
 
@@ -343,8 +343,6 @@ static void __init palmld_init(void)
 }
 
 MACHINE_START(PALMLD, "Palm LifeDrive")
-	.phys_io	= PALMLD_PHYS_IO_START,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
 	.map_io		= palmld_map_io,
 	.init_irq	= pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 1c281995f65..862da812cd1 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -39,7 +39,7 @@
 #include <mach/mmc.h>
 #include <mach/pxafb.h>
 #include <mach/irda.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <mach/udc.h>
 #include <mach/palmasoc.h>
 #include <mach/palm27x.h>
@@ -202,8 +202,6 @@ static void __init palmt5_init(void)
 }
 
 MACHINE_START(PALMT5, "Palm Tungsten|T5")
-	.phys_io	= PALMT5_PHYS_IO_START,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
 	.map_io		= pxa_map_io,
 	.reserve	= palmt5_reserve,
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index ce1104d1bc1..2131d586091 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -412,9 +412,7 @@ static void __init palmtc_init(void)
 };
 
 MACHINE_START(PALMTC, "Palm Tungsten|C")
-	.phys_io	= 0x40000000,
 	.boot_params 	= 0xa0000100,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io		= pxa_map_io,
 	.init_irq	= pxa25x_init_irq,
 	.timer		= &pxa_timer,
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index 93c11a0438d..a9dae7bc35d 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -373,8 +373,6 @@ static void __init palmte2_init(void)
 }
 
 MACHINE_START(PALMTE2, "Palm Tungsten|E2")
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
 	.map_io		= pxa_map_io,
 	.init_irq	= pxa25x_init_irq,
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
index 52defd5e42e..00e2d7ba84e 100644
--- a/arch/arm/mach-pxa/palmtreo.c
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -39,7 +39,7 @@
 #include <mach/mmc.h>
 #include <mach/pxafb.h>
 #include <mach/irda.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <mach/udc.h>
 #include <mach/ohci.h>
 #include <mach/pxa2xx-regs.h>
@@ -441,8 +441,6 @@ static void __init centro_init(void)
 }
 
 MACHINE_START(TREO680, "Palm Treo 680")
-	.phys_io        = TREO_PHYS_IO_START,
-	.io_pg_offst    = io_p2v(0x40000000),
 	.boot_params    = 0xa0000100,
 	.map_io         = pxa_map_io,
 	.reserve	= treo_reserve,
@@ -452,8 +450,6 @@ MACHINE_START(TREO680, "Palm Treo 680")
 MACHINE_END
 
 MACHINE_START(CENTRO, "Palm Centro 685")
-	.phys_io        = TREO_PHYS_IO_START,
-	.io_pg_offst    = io_p2v(0x40000000),
 	.boot_params    = 0xa0000100,
 	.map_io         = pxa_map_io,
 	.reserve	= treo_reserve,
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 144dc2b6911..d2060a1d1d6 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -43,7 +43,7 @@
 #include <mach/mmc.h>
 #include <mach/pxafb.h>
 #include <mach/irda.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <mach/udc.h>
 #include <mach/palmasoc.h>
 #include <mach/palm27x.h>
@@ -363,8 +363,6 @@ static void __init palmtx_init(void)
 }
 
 MACHINE_START(PALMTX, "Palm T|X")
-	.phys_io	= PALMTX_PHYS_IO_START,
-	.io_pg_offst	= io_p2v(0x40000000),
 	.boot_params	= 0xa0000100,
 	.map_io		= palmtx_map_io,
 	.init_irq	= pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index 87e4b1044e0..af6203fbca9 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -41,7 +41,7 @@
 #include <mach/mmc.h>
 #include <mach/pxafb.h>
 #include <mach/irda.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <mach/udc.h>
 #include <mach/palmasoc.h>
 #include <mach/palm27x.h>
@@ -279,8 +279,6 @@ static void __init palmz72_init(void)
 }
 
 MACHINE_START(PALMZ72, "Palm Zire72")
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= io_p2v(0x40000000),
 	.boot_params	= 0xa0000100,
 	.map_io		= pxa_map_io,
 	.init_irq	= pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index 2190af06647..c77e8f30a43 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -259,9 +259,8 @@ static void __init pcm027_map_io(void)
 MACHINE_START(PCM027, "Phytec Messtechnik GmbH phyCORE-PXA270")
 	/* Maintainer: Pengutronix */
 	.boot_params	= 0xa0000100,
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io		= pcm027_map_io,
+	.nr_irqs	= PCM027_NR_IRQS,
 	.init_irq	= pxa27x_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= pcm027_init,
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 55e8fcde014..93a191c889d 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -465,10 +465,9 @@ static void __init fixup_poodle(struct machine_desc *desc,
 }
 
 MACHINE_START(POODLE, "SHARP Poodle")
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.fixup		= fixup_poodle,
 	.map_io		= pxa_map_io,
+	.nr_irqs	= POODLE_NR_IRQS,	/* 4 for LoCoMo */
 	.init_irq	= pxa25x_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= poodle_init,
diff --git a/arch/arm/mach-pxa/pxa3xx-ulpi.c b/arch/arm/mach-pxa/pxa3xx-ulpi.c
new file mode 100644
index 00000000000..ce7168b233e
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa3xx-ulpi.c
@@ -0,0 +1,400 @@
+/*
+ * linux/arch/arm/mach-pxa/pxa3xx-ulpi.c
+ *
+ * code specific to pxa3xx aka Monahans
+ *
+ * Copyright (C) 2010 CompuLab Ltd.
+ *
+ * 2010-13-07: Igor Grinberg <grinberg@compulab.co.il>
+ *             initial version: pxa310 USB Host mode support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/usb.h>
+#include <linux/usb/otg.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-u2d.h>
+#include <mach/pxa3xx-u2d.h>
+
+struct pxa3xx_u2d_ulpi {
+	struct clk		*clk;
+	void __iomem		*mmio_base;
+
+	struct otg_transceiver	*otg;
+	unsigned int		ulpi_mode;
+};
+
+static struct pxa3xx_u2d_ulpi *u2d;
+
+static inline u32 u2d_readl(u32 reg)
+{
+	return __raw_readl(u2d->mmio_base + reg);
+}
+
+static inline void u2d_writel(u32 reg, u32 val)
+{
+	__raw_writel(val, u2d->mmio_base + reg);
+}
+
+#if defined(CONFIG_PXA310_ULPI)
+enum u2d_ulpi_phy_mode {
+	SYNCH		= 0,
+	CARKIT		= (1 << 0),
+	SER_3PIN	= (1 << 1),
+	SER_6PIN	= (1 << 2),
+	LOWPOWER	= (1 << 3),
+};
+
+static inline enum u2d_ulpi_phy_mode pxa310_ulpi_get_phymode(void)
+{
+	return (u2d_readl(U2DOTGUSR) >> 28) & 0xF;
+}
+
+static int pxa310_ulpi_poll(void)
+{
+	int timeout = 50000;
+
+	while (timeout--) {
+		if (!(u2d_readl(U2DOTGUCR) & U2DOTGUCR_RUN))
+			return 0;
+
+		cpu_relax();
+	}
+
+	pr_warning("%s: ULPI access timed out!\n", __func__);
+
+	return -ETIMEDOUT;
+}
+
+static int pxa310_ulpi_read(struct otg_transceiver *otg, u32 reg)
+{
+	int err;
+
+	if (pxa310_ulpi_get_phymode() != SYNCH) {
+		pr_warning("%s: PHY is not in SYNCH mode!\n", __func__);
+		return -EBUSY;
+	}
+
+	u2d_writel(U2DOTGUCR, U2DOTGUCR_RUN | U2DOTGUCR_RNW | (reg << 16));
+	msleep(5);
+
+	err = pxa310_ulpi_poll();
+	if (err)
+		return err;
+
+	return u2d_readl(U2DOTGUCR) & U2DOTGUCR_RDATA;
+}
+
+static int pxa310_ulpi_write(struct otg_transceiver *otg, u32 val, u32 reg)
+{
+	if (pxa310_ulpi_get_phymode() != SYNCH) {
+		pr_warning("%s: PHY is not in SYNCH mode!\n", __func__);
+		return -EBUSY;
+	}
+
+	u2d_writel(U2DOTGUCR, U2DOTGUCR_RUN | (reg << 16) | (val << 8));
+	msleep(5);
+
+	return pxa310_ulpi_poll();
+}
+
+struct otg_io_access_ops pxa310_ulpi_access_ops = {
+	.read	= pxa310_ulpi_read,
+	.write	= pxa310_ulpi_write,
+};
+
+static void pxa310_otg_transceiver_rtsm(void)
+{
+	u32 u2dotgcr;
+
+	/* put PHY to sync mode */
+	u2dotgcr = u2d_readl(U2DOTGCR);
+	u2dotgcr |=  U2DOTGCR_RTSM | U2DOTGCR_UTMID;
+	u2d_writel(U2DOTGCR, u2dotgcr);
+	msleep(10);
+
+	/* setup OTG sync mode */
+	u2dotgcr = u2d_readl(U2DOTGCR);
+	u2dotgcr |= U2DOTGCR_ULAF;
+	u2dotgcr &= ~(U2DOTGCR_SMAF | U2DOTGCR_CKAF);
+	u2d_writel(U2DOTGCR, u2dotgcr);
+}
+
+static int pxa310_start_otg_host_transcvr(struct usb_bus *host)
+{
+	int err;
+
+	pxa310_otg_transceiver_rtsm();
+
+	err = otg_init(u2d->otg);
+	if (err) {
+		pr_err("OTG transceiver init failed");
+		return err;
+	}
+
+	err = otg_set_vbus(u2d->otg, 1);
+	if (err) {
+		pr_err("OTG transceiver VBUS set failed");
+		return err;
+	}
+
+	err = otg_set_host(u2d->otg, host);
+	if (err)
+		pr_err("OTG transceiver Host mode set failed");
+
+	return err;
+}
+
+static int pxa310_start_otg_hc(struct usb_bus *host)
+{
+	u32 u2dotgcr;
+	int err;
+
+	/* disable USB device controller */
+	u2d_writel(U2DCR, u2d_readl(U2DCR) & ~U2DCR_UDE);
+	u2d_writel(U2DOTGCR, u2d_readl(U2DOTGCR) | U2DOTGCR_UTMID);
+	u2d_writel(U2DOTGICR, u2d_readl(U2DOTGICR) & ~0x37F7F);
+
+	err = pxa310_start_otg_host_transcvr(host);
+	if (err)
+		return err;
+
+	/* set xceiver mode */
+	if (u2d->ulpi_mode & ULPI_IC_6PIN_SERIAL)
+		u2d_writel(U2DP3CR, u2d_readl(U2DP3CR) & ~U2DP3CR_P2SS);
+	else if (u2d->ulpi_mode & ULPI_IC_3PIN_SERIAL)
+		u2d_writel(U2DP3CR, u2d_readl(U2DP3CR) | U2DP3CR_P2SS);
+
+	/* start OTG host controller */
+	u2dotgcr = u2d_readl(U2DOTGCR) | U2DOTGCR_SMAF;
+	u2d_writel(U2DOTGCR, u2dotgcr & ~(U2DOTGCR_ULAF | U2DOTGCR_CKAF));
+
+	return 0;
+}
+
+static void pxa310_stop_otg_hc(void)
+{
+	pxa310_otg_transceiver_rtsm();
+
+	otg_set_host(u2d->otg, NULL);
+	otg_set_vbus(u2d->otg, 0);
+	otg_shutdown(u2d->otg);
+}
+
+static void pxa310_u2d_setup_otg_hc(void)
+{
+	u32 u2dotgcr;
+
+	u2dotgcr = u2d_readl(U2DOTGCR);
+	u2dotgcr |= U2DOTGCR_ULAF | U2DOTGCR_UTMID;
+	u2dotgcr &= ~(U2DOTGCR_SMAF | U2DOTGCR_CKAF);
+	u2d_writel(U2DOTGCR, u2dotgcr);
+	msleep(5);
+	u2d_writel(U2DOTGCR, u2dotgcr | U2DOTGCR_ULE);
+	msleep(5);
+	u2d_writel(U2DOTGICR, u2d_readl(U2DOTGICR) & ~0x37F7F);
+}
+
+static int pxa310_otg_init(struct pxa3xx_u2d_platform_data *pdata)
+{
+	unsigned int ulpi_mode = ULPI_OTG_DRVVBUS;
+
+	if (pdata) {
+		if (pdata->ulpi_mode & ULPI_SER_6PIN)
+			ulpi_mode |= ULPI_IC_6PIN_SERIAL;
+		else if (pdata->ulpi_mode & ULPI_SER_3PIN)
+			ulpi_mode |= ULPI_IC_3PIN_SERIAL;
+	}
+
+	u2d->ulpi_mode = ulpi_mode;
+
+	u2d->otg = otg_ulpi_create(&pxa310_ulpi_access_ops, ulpi_mode);
+	if (!u2d->otg)
+		return -ENOMEM;
+
+	u2d->otg->io_priv = u2d->mmio_base;
+
+	return 0;
+}
+
+static void pxa310_otg_exit(void)
+{
+	kfree(u2d->otg);
+}
+#else
+static inline void pxa310_u2d_setup_otg_hc(void) {}
+static inline int pxa310_start_otg_hc(struct usb_bus *host)
+{
+	return 0;
+}
+static inline void pxa310_stop_otg_hc(void) {}
+static inline int pxa310_otg_init(struct pxa3xx_u2d_platform_data *pdata)
+{
+	return 0;
+}
+static inline void pxa310_otg_exit(void) {}
+#endif /* CONFIG_PXA310_ULPI */
+
+int pxa3xx_u2d_start_hc(struct usb_bus *host)
+{
+	int err = 0;
+
+	/* In case the PXA3xx ULPI isn't used, do nothing. */
+	if (!u2d)
+		return 0;
+
+	clk_enable(u2d->clk);
+
+	if (cpu_is_pxa310()) {
+		pxa310_u2d_setup_otg_hc();
+		err = pxa310_start_otg_hc(host);
+	}
+
+	return err;
+}
+
+void pxa3xx_u2d_stop_hc(struct usb_bus *host)
+{
+	/* In case the PXA3xx ULPI isn't used, do nothing. */
+	if (!u2d)
+		return;
+
+	if (cpu_is_pxa310())
+		pxa310_stop_otg_hc();
+
+	clk_disable(u2d->clk);
+}
+
+static int pxa3xx_u2d_probe(struct platform_device *pdev)
+{
+	struct pxa3xx_u2d_platform_data *pdata = pdev->dev.platform_data;
+	struct resource *r;
+	int err;
+
+	u2d = kzalloc(sizeof(struct pxa3xx_u2d_ulpi), GFP_KERNEL);
+	if (!u2d) {
+		dev_err(&pdev->dev, "failed to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	u2d->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(u2d->clk)) {
+		dev_err(&pdev->dev, "failed to get u2d clock\n");
+		err = PTR_ERR(u2d->clk);
+		goto err_free_mem;
+	}
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!r) {
+		dev_err(&pdev->dev, "no IO memory resource defined\n");
+		err = -ENODEV;
+		goto err_put_clk;
+	}
+
+        r = request_mem_region(r->start, resource_size(r), pdev->name);
+        if (!r) {
+                dev_err(&pdev->dev, "failed to request memory resource\n");
+                err = -EBUSY;
+                goto err_put_clk;
+        }
+
+	u2d->mmio_base = ioremap(r->start, resource_size(r));
+	if (!u2d->mmio_base) {
+		dev_err(&pdev->dev, "ioremap() failed\n");
+		err = -ENODEV;
+		goto err_free_res;
+	}
+
+	if (pdata->init) {
+		err = pdata->init(&pdev->dev);
+		if (err)
+			goto err_free_io;
+	}
+
+	/* Only PXA310 U2D has OTG functionality */
+	if (cpu_is_pxa310()) {
+		err = pxa310_otg_init(pdata);
+		if (err)
+			goto err_free_plat;
+	}
+
+	platform_set_drvdata(pdev, &u2d);
+
+	return 0;
+
+err_free_plat:
+	if (pdata->exit)
+		pdata->exit(&pdev->dev);
+err_free_io:
+	iounmap(u2d->mmio_base);
+err_free_res:
+	release_mem_region(r->start, resource_size(r));
+err_put_clk:
+	clk_put(u2d->clk);
+err_free_mem:
+	kfree(u2d);
+	return err;
+}
+
+static int pxa3xx_u2d_remove(struct platform_device *pdev)
+{
+	struct pxa3xx_u2d_platform_data *pdata = pdev->dev.platform_data;
+	struct resource *r;
+
+	if (cpu_is_pxa310()) {
+		pxa310_stop_otg_hc();
+		pxa310_otg_exit();
+	}
+
+	if (pdata->exit)
+		pdata->exit(&pdev->dev);
+
+	platform_set_drvdata(pdev, NULL);
+	iounmap(u2d->mmio_base);
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(r->start, resource_size(r));
+
+	clk_put(u2d->clk);
+
+	kfree(u2d);
+
+	return 0;
+}
+
+static struct platform_driver pxa3xx_u2d_ulpi_driver = {
+        .driver		= {
+                .name   = "pxa3xx-u2d",
+		.owner	= THIS_MODULE,
+        },
+        .probe          = pxa3xx_u2d_probe,
+        .remove         = pxa3xx_u2d_remove,
+};
+
+static int pxa3xx_u2d_ulpi_init(void)
+{
+	return platform_driver_register(&pxa3xx_u2d_ulpi_driver);
+}
+module_init(pxa3xx_u2d_ulpi_init);
+
+static void __exit pxa3xx_u2d_ulpi_exit(void)
+{
+	platform_driver_unregister(&pxa3xx_u2d_ulpi_driver);
+}
+module_exit(pxa3xx_u2d_ulpi_exit);
+
+MODULE_DESCRIPTION("PXA3xx U2D ULPI driver");
+MODULE_AUTHOR("Igor Grinberg");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index fa0014847c7..c85c3a7abd3 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -98,23 +98,6 @@ unsigned int pxa3xx_get_clk_frequency_khz(int info)
 	return CLK / 1000;
 }
 
-/*
- * Return the current static memory controller clock frequency
- * in units of 10kHz
- */
-unsigned int pxa3xx_get_memclk_frequency_10khz(void)
-{
-	unsigned long acsr;
-	unsigned int smcfs, clk = 0;
-
-	acsr = ACSR;
-
-	smcfs = (acsr >> 23) & 0x7;
-	clk = (acsr & ACCR_D0CS) ? RO_CLK : smcfs_mult[smcfs] * BASE_CLK;
-
-	return (clk / 10000);
-}
-
 void pxa3xx_clear_reset_status(unsigned int mask)
 {
 	/* RESET_STATUS_* has a 1:1 mapping with ARSR */
@@ -265,7 +248,7 @@ static struct clk_lookup pxa3xx_clkregs[] = {
 	INIT_CLKREG(&clk_pxa3xx_i2c, "pxa2xx-i2c.0", NULL),
 	INIT_CLKREG(&clk_pxa3xx_udc, "pxa27x-udc", NULL),
 	INIT_CLKREG(&clk_pxa3xx_usbh, "pxa27x-ohci", NULL),
-	INIT_CLKREG(&clk_pxa3xx_u2d, NULL, "U2DCLK"),
+	INIT_CLKREG(&clk_pxa3xx_u2d, "pxa3xx-u2d", NULL),
 	INIT_CLKREG(&clk_pxa3xx_keypad, "pxa27x-keypad", NULL),
 	INIT_CLKREG(&clk_pxa3xx_ssp1, "pxa27x-ssp.0", NULL),
 	INIT_CLKREG(&clk_pxa3xx_ssp2, "pxa27x-ssp.1", NULL),
diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c
index 06429200828..7d29dd3af79 100644
--- a/arch/arm/mach-pxa/pxa930.c
+++ b/arch/arm/mach-pxa/pxa930.c
@@ -192,7 +192,7 @@ static struct mfp_addr_map pxa935_mfp_addr_map[] __initdata = {
 
 static int __init pxa930_init(void)
 {
-	if (cpu_is_pxa930() || cpu_is_pxa935()) {
+	if (cpu_is_pxa930() || cpu_is_pxa935() || cpu_is_pxa950()) {
 		mfp_init_base(io_p2v(MFPR_BASE));
 		mfp_init_addr(pxa930_mfp_addr_map);
 	}
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index 67e04f4e07c..4121d03ea2c 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -1083,8 +1083,6 @@ static void __init raumfeld_speaker_init(void)
 
 #ifdef CONFIG_MACH_RAUMFELD_RC
 MACHINE_START(RAUMFELD_RC, "Raumfeld Controller")
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= RAUMFELD_SDRAM_BASE + 0x100,
 	.init_machine	= raumfeld_controller_init,
 	.map_io		= pxa_map_io,
@@ -1095,8 +1093,6 @@ MACHINE_END
 
 #ifdef CONFIG_MACH_RAUMFELD_CONNECTOR
 MACHINE_START(RAUMFELD_CONNECTOR, "Raumfeld Connector")
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= RAUMFELD_SDRAM_BASE + 0x100,
 	.init_machine	= raumfeld_connector_init,
 	.map_io		= pxa_map_io,
@@ -1107,8 +1103,6 @@ MACHINE_END
 
 #ifdef CONFIG_MACH_RAUMFELD_SPEAKER
 MACHINE_START(RAUMFELD_SPEAKER, "Raumfeld Speaker")
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= RAUMFELD_SDRAM_BASE + 0x100,
 	.init_machine	= raumfeld_speaker_init,
 	.map_io		= pxa_map_io,
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index 115b6f234bd..4b521e045d7 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -596,9 +596,7 @@ static void __init saar_init(void)
 
 MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)")
 	/* Maintainer: Eric Miao <eric.miao@marvell.com> */
-	.phys_io        = 0x40000000,
 	.boot_params    = 0xa0000100,
-	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io         = pxa_map_io,
 	.init_irq       = pxa3xx_init_irq,
 	.timer          = &pxa_timer,
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 1cd99cb87bb..f736119f1eb 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -979,8 +979,6 @@ static void __init spitz_fixup(struct machine_desc *desc,
 
 #ifdef CONFIG_MACH_SPITZ
 MACHINE_START(SPITZ, "SHARP Spitz")
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.fixup		= spitz_fixup,
 	.map_io		= pxa_map_io,
 	.init_irq	= pxa27x_init_irq,
@@ -991,8 +989,6 @@ MACHINE_END
 
 #ifdef CONFIG_MACH_BORZOI
 MACHINE_START(BORZOI, "SHARP Borzoi")
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.fixup		= spitz_fixup,
 	.map_io		= pxa_map_io,
 	.init_irq	= pxa27x_init_irq,
@@ -1003,8 +999,6 @@ MACHINE_END
 
 #ifdef CONFIG_MACH_AKITA
 MACHINE_START(AKITA, "SHARP Akita")
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.fixup		= spitz_fixup,
 	.map_io		= pxa_map_io,
 	.init_irq	= pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index a654d1e6b38..738adc1773f 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -56,6 +56,8 @@
 #include "devices.h"
 #include "generic.h"
 
+#define STARGATE_NR_IRQS	(IRQ_BOARD_START + 8)
+
 /* Bluetooth */
 #define SG2_BT_RESET		81
 
@@ -996,8 +998,6 @@ static void __init stargate2_init(void)
 
 #ifdef CONFIG_MACH_INTELMOTE2
 MACHINE_START(INTELMOTE2, "IMOTE 2")
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io		= pxa_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.timer		= &pxa_timer,
@@ -1008,9 +1008,8 @@ MACHINE_END
 
 #ifdef CONFIG_MACH_STARGATE2
 MACHINE_START(STARGATE2, "Stargate 2")
-	.phys_io = 0x40000000,
-	.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io = pxa_map_io,
+	.nr_irqs = STARGATE_NR_IRQS,
 	.init_irq = pxa27x_init_irq,
 	.timer = &pxa_timer,
 	.init_machine = stargate2_init,
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index f02dcb5b4e9..2ea7545273a 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -25,7 +25,7 @@
 
 #include <mach/pxa930.h>
 #include <mach/pxafb.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 
 #include "devices.h"
 #include "generic.h"
@@ -489,9 +489,7 @@ static void __init tavorevb_init(void)
 
 MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)")
 	/* Maintainer: Eric Miao <eric.miao@marvell.com> */
-	.phys_io        = 0x40000000,
 	.boot_params    = 0xa0000100,
-	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io         = pxa_map_io,
 	.init_irq       = pxa3xx_init_irq,
 	.timer          = &pxa_timer,
diff --git a/arch/arm/mach-pxa/tavorevb3.c b/arch/arm/mach-pxa/tavorevb3.c
new file mode 100644
index 00000000000..dc3011697bb
--- /dev/null
+++ b/arch/arm/mach-pxa/tavorevb3.c
@@ -0,0 +1,135 @@
+/*
+ *  linux/arch/arm/mach-pxa/tavorevb3.c
+ *
+ *  Support for the Marvell EVB3 Development Platform.
+ *
+ *  Copyright:  (C) Copyright 2008-2010 Marvell International Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/mfd/88pm860x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/pxa930.h>
+
+#include <plat/i2c.h>
+
+#include "devices.h"
+#include "generic.h"
+
+#define TAVOREVB3_NR_IRQS	(IRQ_BOARD_START + 24)
+
+static mfp_cfg_t evb3_mfp_cfg[] __initdata = {
+	/* UART */
+	GPIO53_UART1_TXD,
+	GPIO54_UART1_RXD,
+
+	/* PMIC */
+	PMIC_INT_GPIO83,
+};
+
+#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
+static struct pm860x_touch_pdata evb3_touch = {
+	.gpadc_prebias	= 1,
+	.slot_cycle	= 1,
+	.tsi_prebias	= 6,
+	.pen_prebias	= 16,
+	.pen_prechg	= 2,
+	.res_x		= 300,
+};
+
+static struct pm860x_backlight_pdata evb3_backlight[] = {
+	{
+		.id	= PM8606_ID_BACKLIGHT,
+		.iset	= PM8606_WLED_CURRENT(24),
+		.flags	= PM8606_BACKLIGHT1,
+	},
+	{},
+};
+
+static struct pm860x_led_pdata evb3_led[] = {
+	{
+		.id	= PM8606_ID_LED,
+		.iset	= PM8606_LED_CURRENT(12),
+		.flags	= PM8606_LED1_RED,
+	}, {
+		.id	= PM8606_ID_LED,
+		.iset	= PM8606_LED_CURRENT(12),
+		.flags	= PM8606_LED1_GREEN,
+	}, {
+		.id	= PM8606_ID_LED,
+		.iset	= PM8606_LED_CURRENT(12),
+		.flags	= PM8606_LED1_BLUE,
+	}, {
+		.id	= PM8606_ID_LED,
+		.iset	= PM8606_LED_CURRENT(12),
+		.flags	= PM8606_LED2_RED,
+	}, {
+		.id	= PM8606_ID_LED,
+		.iset	= PM8606_LED_CURRENT(12),
+		.flags	= PM8606_LED2_GREEN,
+	}, {
+		.id	= PM8606_ID_LED,
+		.iset	= PM8606_LED_CURRENT(12),
+		.flags	= PM8606_LED2_BLUE,
+	},
+};
+
+static struct pm860x_platform_data evb3_pm8607_info = {
+	.touch				= &evb3_touch,
+	.backlight			= &evb3_backlight[0],
+	.led				= &evb3_led[0],
+	.companion_addr			= 0x10,
+	.irq_mode			= 0,
+	.irq_base			= IRQ_BOARD_START,
+
+	.i2c_port			= GI2C_PORT,
+};
+
+static struct i2c_board_info evb3_i2c_info[] = {
+	{
+		.type		= "88PM860x",
+		.addr		= 0x34,
+		.platform_data	= &evb3_pm8607_info,
+		.irq		= gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO83)),
+	},
+};
+
+static void __init evb3_init_i2c(void)
+{
+	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(evb3_i2c_info));
+}
+#else
+static inline void evb3_init_i2c(void) {}
+#endif
+
+static void __init evb3_init(void)
+{
+	/* initialize MFP configurations */
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(evb3_mfp_cfg));
+
+	pxa_set_ffuart_info(NULL);
+
+	evb3_init_i2c();
+}
+
+MACHINE_START(TAVOREVB3, "PXA950 Evaluation Board (aka TavorEVB3)")
+	.boot_params	= 0xa0000100,
+	.map_io         = pxa_map_io,
+	.nr_irqs	= TAVOREVB3_NR_IRQS,
+	.init_irq       = pxa3xx_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = evb3_init,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 83cc3a18c2e..0ee1df49606 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -952,10 +952,9 @@ static void __init fixup_tosa(struct machine_desc *desc,
 }
 
 MACHINE_START(TOSA, "SHARP Tosa")
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.fixup          = fixup_tosa,
 	.map_io         = pxa_map_io,
+	.nr_irqs	= TOSA_NR_IRQS,
 	.init_irq       = pxa25x_init_irq,
 	.init_machine   = tosa_init,
 	.timer          = &pxa_timer,
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 0acff172ef2..565d062f51d 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -555,8 +555,6 @@ static void __init trizeps4_map_io(void)
 
 MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module")
 	/* MAINTAINER("Jürgen Schindele") */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= TRIZEPS4_SDRAM_BASE + 0x100,
 	.init_machine	= trizeps4_init,
 	.map_io		= trizeps4_map_io,
@@ -566,8 +564,6 @@ MACHINE_END
 
 MACHINE_START(TRIZEPS4WL, "Keith und Koep Trizeps IV-WL module")
 	/* MAINTAINER("Jürgen Schindele") */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= TRIZEPS4_SDRAM_BASE + 0x100,
 	.init_machine	= trizeps4_init,
 	.map_io		= trizeps4_map_io,
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index e90114a7e24..438fc9a5ed5 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -992,8 +992,6 @@ static void __init viper_map_io(void)
 
 MACHINE_START(VIPER, "Arcom/Eurotech VIPER SBC")
 	/* Maintainer: Marc Zyngier <maz@misterjones.org> */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
 	.map_io		= viper_map_io,
 	.init_irq	= viper_init_irq,
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index 37d6173bbb6..f45ac096177 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -718,8 +718,6 @@ static void __init vpac270_init(void)
 }
 
 MACHINE_START(VPAC270, "Voipac PXA270")
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
 	.map_io		= pxa_map_io,
 	.init_irq	= pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c
index d3b4e3f2e03..3260ce73d32 100644
--- a/arch/arm/mach-pxa/xcep.c
+++ b/arch/arm/mach-pxa/xcep.c
@@ -181,8 +181,6 @@ static void __init xcep_init(void)
 }
 
 MACHINE_START(XCEP, "Iskratel XCEP")
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
 	.init_machine	= xcep_init,
 	.map_io		= pxa_map_io,
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index f0d02288b4c..fefde9848d8 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -37,7 +37,7 @@
 #include <mach/z2.h>
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <mach/pxa2xx_spi.h>
 
 #include <plat/i2c.h>
@@ -703,9 +703,7 @@ static void __init z2_init(void)
 }
 
 MACHINE_START(ZIPIT2, "Zipit Z2")
-	.phys_io	= 0x40000000,
 	.boot_params	= 0xa0000100,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io		= pxa_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.timer		= &pxa_timer,
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index 03b9cb910e0..dea46a2d089 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -900,10 +900,9 @@ static void __init zeus_map_io(void)
 
 MACHINE_START(ARCOM_ZEUS, "Arcom/Eurotech ZEUS")
 	/* Maintainer: Marc Zyngier <maz@misterjones.org> */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= ((io_p2v(0x40000000) >> 18) & 0xfffc),
 	.boot_params	= 0xa0000100,
 	.map_io		= zeus_map_io,
+	.nr_irqs	= ZEUS_NR_IRQS,
 	.init_irq	= zeus_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= zeus_init,
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index c479cbecf78..f25fb6245bd 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -30,7 +30,7 @@
 #include <mach/zylonite.h>
 #include <mach/mmc.h>
 #include <mach/ohci.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <plat/pxa3xx_nand.h>
 
 #include "devices.h"
@@ -411,10 +411,9 @@ static void __init zylonite_init(void)
 }
 
 MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
-	.phys_io	= 0x40000000,
 	.boot_params	= 0xa0000100,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io		= pxa_map_io,
+	.nr_irqs	= ZYLONITE_NR_IRQS,
 	.init_irq	= pxa3xx_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= zylonite_init,
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 2fa38df2841..07c08151dfe 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -259,6 +259,7 @@ struct mmci_platform_data realview_mmc0_plat_data = {
 	.status		= realview_mmc_status,
 	.gpio_wp	= 17,
 	.gpio_cd	= 16,
+	.cd_invert	= true,
 };
 
 struct mmci_platform_data realview_mmc1_plat_data = {
@@ -266,6 +267,7 @@ struct mmci_platform_data realview_mmc1_plat_data = {
 	.status		= realview_mmc_status,
 	.gpio_wp	= 19,
 	.gpio_cd	= 18,
+	.cd_invert	= true,
 };
 
 /*
diff --git a/arch/arm/mach-realview/include/mach/debug-macro.S b/arch/arm/mach-realview/include/mach/debug-macro.S
index 86622289b74..90b687cbe04 100644
--- a/arch/arm/mach-realview/include/mach/debug-macro.S
+++ b/arch/arm/mach-realview/include/mach/debug-macro.S
@@ -33,12 +33,10 @@
 #error "Unknown RealView platform"
 #endif
 
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx,      #0x10000000
-		movne	\rx,      #0xfb000000	@ virtual base
-		orr	\rx, \rx, #DEBUG_LL_UART_OFFSET
+		.macro	addruart, rp, rv
+		mov	\rp, #DEBUG_LL_UART_OFFSET
+		orr	\rv, \rp, #0xfb000000	@ virtual base
+		orr	\rp, \rp, #0x10000000	@ physical base
 		.endm
 
 #include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-realview/include/mach/smp.h b/arch/arm/mach-realview/include/mach/smp.h
index dd53892d44a..d3cd265cb05 100644
--- a/arch/arm/mach-realview/include/mach/smp.h
+++ b/arch/arm/mach-realview/include/mach/smp.h
@@ -1,16 +1,8 @@
 #ifndef ASMARM_ARCH_SMP_H
 #define ASMARM_ARCH_SMP_H
 
-
 #include <asm/hardware/gic.h>
-
-#define hard_smp_processor_id()			\
-	({						\
-		unsigned int cpunum;			\
-		__asm__("mrc p15, 0, %0, c0, c0, 5"	\
-			: "=r" (cpunum));		\
-		cpunum &= 0x0F;				\
-	})
+#include <asm/smp_mpidr.h>
 
 /*
  * We use IRQ1 as the IPI
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 991c1f8390e..f2697106f80 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -486,8 +486,6 @@ static void __init realview_eb_init(void)
 
 MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.phys_io	= REALVIEW_EB_UART0_BASE & SECTION_MASK,
-	.io_pg_offst	= (IO_ADDRESS(REALVIEW_EB_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
 	.fixup		= realview_fixup,
 	.map_io		= realview_eb_map_io,
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index d2be12eb829..a4125619d71 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -378,8 +378,6 @@ static void __init realview_pb1176_init(void)
 
 MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.phys_io	= REALVIEW_PB1176_UART0_BASE & SECTION_MASK,
-	.io_pg_offst	= (IO_ADDRESS(REALVIEW_PB1176_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
 	.fixup		= realview_pb1176_fixup,
 	.map_io		= realview_pb1176_map_io,
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index d591bc00b86..117b95b2ca1 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -381,8 +381,6 @@ static void __init realview_pb11mp_init(void)
 
 MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.phys_io	= REALVIEW_PB11MP_UART0_BASE & SECTION_MASK,
-	.io_pg_offst	= (IO_ADDRESS(REALVIEW_PB11MP_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
 	.fixup		= realview_fixup,
 	.map_io		= realview_pb11mp_map_io,
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index 6c37621217b..929b8dc12e8 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -331,8 +331,6 @@ static void __init realview_pba8_init(void)
 
 MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.phys_io	= REALVIEW_PBA8_UART0_BASE & SECTION_MASK,
-	.io_pg_offst	= (IO_ADDRESS(REALVIEW_PBA8_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
 	.fixup		= realview_fixup,
 	.map_io		= realview_pba8_map_io,
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index 9428eff0b11..b9f9e20031a 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -417,8 +417,6 @@ static void __init realview_pbx_init(void)
 
 MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.phys_io	= REALVIEW_PBX_UART0_BASE & SECTION_MASK,
-	.io_pg_offst	= (IO_ADDRESS(REALVIEW_PBX_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
 	.fixup		= realview_pbx_fixup,
 	.map_io		= realview_pbx_map_io,
diff --git a/arch/arm/mach-rpc/include/mach/debug-macro.S b/arch/arm/mach-rpc/include/mach/debug-macro.S
index 6fc8d66395d..85effffdc2b 100644
--- a/arch/arm/mach-rpc/include/mach/debug-macro.S
+++ b/arch/arm/mach-rpc/include/mach/debug-macro.S
@@ -11,13 +11,11 @@
  *
 */
 
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x03000000
-		movne	\rx, #0xe0000000
-		orr	\rx, \rx, #0x00010000
-		orr	\rx, \rx, #0x00000fe0
+		.macro	addruart, rp, rv
+		mov	\rp, #0x00010000
+		orr	\rp, \rp, #0x00000fe0
+		orr	\rv, \rp, #0xe0000000	@ virtual
+		orr	\rp, \rp, #0x03000000	@ physical
 		.endm
 
 #define UART_SHIFT	2
diff --git a/arch/arm/mach-rpc/include/mach/vmalloc.h b/arch/arm/mach-rpc/include/mach/vmalloc.h
index 9a96fd69e70..3bcd86fadb8 100644
--- a/arch/arm/mach-rpc/include/mach/vmalloc.h
+++ b/arch/arm/mach-rpc/include/mach/vmalloc.h
@@ -7,4 +7,4 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#define VMALLOC_END       (PAGE_OFFSET + 0x1c000000)
+#define VMALLOC_END       0xdc000000
diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c
index c7fc01e9d1f..580b3c73d2c 100644
--- a/arch/arm/mach-rpc/riscpc.c
+++ b/arch/arm/mach-rpc/riscpc.c
@@ -218,8 +218,6 @@ extern struct sys_timer ioc_timer;
 
 MACHINE_START(RISCPC, "Acorn-RiscPC")
 	/* Maintainer: Russell King */
-	.phys_io	= 0x03000000,
-	.io_pg_offst	= ((0xe0000000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.reserve_lp0	= 1,
 	.reserve_lp1	= 1,
diff --git a/arch/arm/mach-s3c2410/include/mach/debug-macro.S b/arch/arm/mach-s3c2410/include/mach/debug-macro.S
index 0eef78b4a6e..5882deaa56b 100644
--- a/arch/arm/mach-s3c2410/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c2410/include/mach/debug-macro.S
@@ -19,13 +19,12 @@
 #define S3C2410_UART1_OFF (0x4000)
 #define SHIFT_2440TXF (14-9)
 
-	.macro addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1
-		ldreq	\rx, = S3C24XX_PA_UART
-		ldrne	\rx, = S3C24XX_VA_UART
+	.macro addruart, rp, rv
+		ldr	\rp, = S3C24XX_PA_UART
+		ldr	\rv, = S3C24XX_VA_UART
 #if CONFIG_DEBUG_S3C_UART != 0
-		add	\rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
+		add	\rp, \rp, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
+		add	\rv, \rv, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
 #endif
 	.endm
 
diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c
index 34fc05a4244..44440cbd762 100644
--- a/arch/arm/mach-s3c2410/mach-amlm5900.c
+++ b/arch/arm/mach-s3c2410/mach-amlm5900.c
@@ -241,8 +241,6 @@ static void __init amlm5900_init(void)
 }
 
 MACHINE_START(AML_M5900, "AML_M5900")
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= amlm5900_map_io,
 	.init_irq	= s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index c1f90f6fab4..2970ea9f7c2 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -664,8 +664,6 @@ static void __init bast_init(void)
 
 MACHINE_START(BAST, "Simtec-BAST")
 	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= bast_map_io,
 	.init_irq	= s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 3ba3bab139d..98c5c9e81ee 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -350,8 +350,6 @@ static void __init h1940_init(void)
 
 MACHINE_START(H1940, "IPAQ-H1940")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= h1940_map_io,
 	.reserve	= h1940_reserve,
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 41f299d983e..271b9aa6d40 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -605,8 +605,6 @@ MACHINE_START(N30, "Acer-N30")
 	/* Maintainer: Christer Weinigel <christer@weinigel.se>,
 				Ben Dooks <ben-linux@fluff.org>
 	*/
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.timer		= &s3c24xx_timer,
 	.init_machine	= n30_init,
@@ -617,8 +615,6 @@ MACHINE_END
 MACHINE_START(N35, "Acer-N35")
 	/* Maintainer: Christer Weinigel <christer@weinigel.se>
 	*/
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.timer		= &s3c24xx_timer,
 	.init_machine	= n30_init,
diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c
index d8c7f2efc1a..0aa16cd5acb 100644
--- a/arch/arm/mach-s3c2410/mach-otom.c
+++ b/arch/arm/mach-s3c2410/mach-otom.c
@@ -116,8 +116,6 @@ static void __init otom11_init(void)
 
 MACHINE_START(OTOM, "Nex Vision - Otom 1.1")
 	/* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= otom11_map_io,
 	.init_machine	= otom11_init,
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index d0e87b6e2e0..e8f49feef28 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -362,8 +362,6 @@ static void __init qt2410_machine_init(void)
 }
 
 MACHINE_START(QT2410, "QT2410")
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= qt2410_map_io,
 	.init_irq	= s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c
index 45222304220..e17f03387ab 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2410.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2410.c
@@ -111,8 +111,6 @@ static void __init smdk2410_init(void)
 MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switch
 				    * to SMDK2410 */
 	/* Maintainer: Jonas Dietsche */
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= smdk2410_map_io,
 	.init_irq	= s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c2410/mach-tct_hammer.c
index 929164a8e9b..a15d0621c22 100644
--- a/arch/arm/mach-s3c2410/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c2410/mach-tct_hammer.c
@@ -152,8 +152,6 @@ static void __init tct_hammer_init(void)
 }
 
 MACHINE_START(TCT_HAMMER, "TCT_HAMMER")
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= tct_hammer_map_io,
 	.init_irq	= s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index d540d79dd26..6ccce5a761b 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -400,8 +400,6 @@ static void __init vr1000_init(void)
 
 MACHINE_START(VR1000, "Thorcom-VR1000")
 	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= vr1000_map_io,
 	.init_machine	= vr1000_init,
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index 478f4b4606c..923e01bdf01 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -675,8 +675,6 @@ static void __init jive_machine_init(void)
 
 MACHINE_START(JIVE, "JIVE")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 
 	.init_irq	= s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index 054c9f92232..8e5758bdd66 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -150,8 +150,6 @@ static void __init smdk2413_machine_init(void)
 
 MACHINE_START(S3C2413, "S3C2413")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 
 	.fixup		= smdk2413_fixup,
@@ -163,8 +161,6 @@ MACHINE_END
 
 MACHINE_START(SMDK2412, "SMDK2412")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 
 	.fixup		= smdk2413_fixup,
@@ -176,8 +172,6 @@ MACHINE_END
 
 MACHINE_START(SMDK2413, "SMDK2413")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 
 	.fixup		= smdk2413_fixup,
diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c
index f291ac25d31..83544ebe20a 100644
--- a/arch/arm/mach-s3c2412/mach-vstms.c
+++ b/arch/arm/mach-s3c2412/mach-vstms.c
@@ -156,8 +156,6 @@ static void __init vstms_init(void)
 }
 
 MACHINE_START(VSTMS, "VSTMS")
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 
 	.fixup		= vstms_fixup,
diff --git a/arch/arm/mach-s3c2416/mach-smdk2416.c b/arch/arm/mach-s3c2416/mach-smdk2416.c
index 5fc3f67ef26..7fc366476d7 100644
--- a/arch/arm/mach-s3c2416/mach-smdk2416.c
+++ b/arch/arm/mach-s3c2416/mach-smdk2416.c
@@ -195,8 +195,6 @@ static void __init smdk2416_machine_init(void)
 
 MACHINE_START(SMDK2416, "SMDK2416")
 	/* Maintainer: Yauhen Kharuzhy <jekhor@gmail.com> */
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 
 	.init_irq	= s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index b73f78a9da5..d7086788b1f 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -498,8 +498,6 @@ static void __init anubis_init(void)
 
 MACHINE_START(ANUBIS, "Simtec-Anubis")
 	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= anubis_map_io,
 	.init_machine	= anubis_init,
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index 84725791e6b..e3810c86a5e 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -233,8 +233,6 @@ static void __init at2440evb_init(void)
 
 
 MACHINE_START(AT2440EVB, "AT2440EVB")
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= at2440evb_map_io,
 	.init_machine	= at2440evb_init,
diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c
index deaabe86741..9f2c14ec718 100644
--- a/arch/arm/mach-s3c2440/mach-gta02.c
+++ b/arch/arm/mach-s3c2440/mach-gta02.c
@@ -572,8 +572,6 @@ static void __init gta02_machine_init(void)
 
 MACHINE_START(NEO1973_GTA02, "GTA02")
 	/* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= gta02_map_io,
 	.init_irq	= s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index a76bcda210a..f62bb4c793b 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -691,8 +691,6 @@ static void __init mini2440_init(void)
 
 MACHINE_START(MINI2440, "MINI2440")
 	/* Maintainer: Michel Pollet <buserror@gmail.com> */
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= mini2440_map_io,
 	.init_machine	= mini2440_init,
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index 3ff62de45fd..37dd306fb7d 100644
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -151,8 +151,6 @@ static void __init nexcoder_init(void)
 
 MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
 	/* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= nexcoder_map_io,
 	.init_machine	= nexcoder_init,
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index 319458da71a..14dc6789775 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -455,8 +455,6 @@ static void __init osiris_init(void)
 
 MACHINE_START(OSIRIS, "Simtec-OSIRIS")
 	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= osiris_map_io,
 	.init_irq	= s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c
index 142d1f92117..32019bd9db3 100644
--- a/arch/arm/mach-s3c2440/mach-rx1950.c
+++ b/arch/arm/mach-s3c2440/mach-rx1950.c
@@ -580,8 +580,6 @@ static void __init rx1950_reserve(void)
 
 MACHINE_START(RX1950, "HP iPAQ RX1950")
     /* Maintainers: Vasily Khoruzhick */
-    .phys_io = S3C2410_PA_UART,
-	.io_pg_offst = (((u32) S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params = S3C2410_SDRAM_PA + 0x100,
 	.map_io = rx1950_map_io,
 	.reserve	= rx1950_reserve,
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index 6bb44f75a9c..1472b1a5b2f 100644
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -218,8 +218,6 @@ static void __init rx3715_init_machine(void)
 
 MACHINE_START(RX3715, "IPAQ-RX3715")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= rx3715_map_io,
 	.reserve	= rx3715_reserve,
diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
index df83276d85a..eedfe0f1164 100644
--- a/arch/arm/mach-s3c2440/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2440/mach-smdk2440.c
@@ -175,8 +175,6 @@ static void __init smdk2440_machine_init(void)
 
 MACHINE_START(S3C2440, "SMDK2440")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 
 	.init_irq	= s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c
index 4c863d3a52f..4337f0a9960 100644
--- a/arch/arm/mach-s3c2443/mach-smdk2443.c
+++ b/arch/arm/mach-s3c2443/mach-smdk2443.c
@@ -132,8 +132,6 @@ static void __init smdk2443_machine_init(void)
 
 MACHINE_START(SMDK2443, "SMDK2443")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 
 	.init_irq	= s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c24a0/include/mach/debug-macro.S b/arch/arm/mach-s3c24a0/include/mach/debug-macro.S
index 239476b81f3..0c5a7380556 100644
--- a/arch/arm/mach-s3c24a0/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c24a0/include/mach/debug-macro.S
@@ -10,13 +10,12 @@
 #include <mach/map.h>
 #include <plat/regs-serial.h>
 
-	.macro addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1
-		ldreq	\rx, = S3C24XX_PA_UART
-		ldrne	\rx, = S3C24XX_VA_UART
+	.macro addruart, rp, rv
+		ldr	\rp, = S3C24XX_PA_UART
+		ldr	\rv, = S3C24XX_VA_UART
 #if CONFIG_DEBUG_S3C_UART != 0
-		add	\rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
+		add	\rp, \rp, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
+		add	\rv, \rv, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
 #endif
 	.endm
 
diff --git a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
index f9ab5d26052..a29e70550c7 100644
--- a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
@@ -21,13 +21,12 @@
 	 * aligned and add in the offset when we load the value here.
 	 */
 
-	.macro addruart, rx, rtmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1
-		ldreq	\rx, = S3C_PA_UART
-		ldrne	\rx, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
+	.macro addruart, rp, rv
+		ldr	\rp, = S3C_PA_UART
+		ldr	\rv, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
 #if CONFIG_DEBUG_S3C_UART != 0
-		add	\rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
+		add	\rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
+		add	\rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
 #endif
 	.endm
 
diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c
index 742dc87bd9c..a53cf149476 100644
--- a/arch/arm/mach-s3c64xx/mach-anw6410.c
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -233,8 +233,6 @@ static void __init anw6410_machine_init(void)
 
 MACHINE_START(ANW6410, "A&W6410")
 	/* Maintainer: Kwangwoo Lee <kwangwoo.lee@gmail.com> */
-	.phys_io	= S3C_PA_UART & 0xfff00000,
-	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
 
 	.init_irq	= s3c6410_init_irq,
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index fba90229f0d..b2639582cac 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -265,8 +265,6 @@ static void __init hmt_machine_init(void)
 
 MACHINE_START(HMT, "Airgoo-HMT")
 	/* Maintainer: Peter Korsgaard <jacmet@sunsite.dk> */
-	.phys_io	= S3C_PA_UART & 0xfff00000,
-	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
 	.init_irq	= s3c6410_init_irq,
 	.map_io		= hmt_map_io,
diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c
index bf65747ea68..c4986498cd1 100644
--- a/arch/arm/mach-s3c64xx/mach-ncp.c
+++ b/arch/arm/mach-s3c64xx/mach-ncp.c
@@ -97,8 +97,6 @@ static void __init ncp_machine_init(void)
 
 MACHINE_START(NCP, "NCP")
 	/* Maintainer: Samsung Electronics */
-	.phys_io	= S3C_PA_UART & 0xfff00000,
-	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
 	.init_irq	= s3c6410_init_irq,
 	.map_io		= ncp_map_io,
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index e130379ba0e..4b4475da8ec 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -141,8 +141,6 @@ static void __init real6410_machine_init(void)
 
 MACHINE_START(REAL6410, "REAL6410")
 	/* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
-	.phys_io	= S3C_PA_UART & 0xfff00000,
-	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
 
 	.init_irq	= s3c6410_init_irq,
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
index 3a9639bc3d9..cb1ebeb0876 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -136,7 +136,7 @@ static struct platform_device smartq_usb_otg_vbus_dev = {
 	.dev.platform_data	= &smartq_usb_otg_vbus_pdata,
 };
 
-static int __init smartq_bl_init(struct device *dev)
+static int smartq_bl_init(struct device *dev)
 {
     s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_SFN(2));
 
diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c
index a4d59b076e3..3a3e5acde52 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq5.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq5.c
@@ -32,7 +32,7 @@
 
 #include "mach-smartq.h"
 
-static struct gpio_led smartq5_leds[] __initdata = {
+static struct gpio_led smartq5_leds[] = {
 	{
 		.name			= "smartq5:green",
 		.active_low		= 1,
@@ -146,8 +146,6 @@ static void __init smartq5_machine_init(void)
 
 MACHINE_START(SMARTQ5, "SmartQ 5")
 	/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
-	.phys_io	= S3C_PA_UART & 0xfff00000,
-	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
 	.init_irq	= s3c6410_init_irq,
 	.map_io		= smartq_map_io,
diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c
index e50a7d78173..e65375877d5 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq7.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq7.c
@@ -32,7 +32,7 @@
 
 #include "mach-smartq.h"
 
-static struct gpio_led smartq7_leds[] __initdata = {
+static struct gpio_led smartq7_leds[] = {
 	{
 		.name			= "smartq7:red",
 		.active_low		= 1,
@@ -162,8 +162,6 @@ static void __init smartq7_machine_init(void)
 
 MACHINE_START(SMARTQ7, "SmartQ 7")
 	/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
-	.phys_io	= S3C_PA_UART & 0xfff00000,
-	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
 	.init_irq	= s3c6410_init_irq,
 	.map_io		= smartq_map_io,
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c
index 59916676d8d..3cca642f1e6 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6400.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -85,8 +85,6 @@ static void __init smdk6400_machine_init(void)
 
 MACHINE_START(SMDK6400, "SMDK6400")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.phys_io	= S3C_PA_UART & 0xfff00000,
-	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
 
 	.init_irq	= s3c6400_init_irq,
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index d498219fff1..ec8865c03a1 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -704,8 +704,6 @@ static void __init smdk6410_machine_init(void)
 
 MACHINE_START(SMDK6410, "SMDK6410")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.phys_io	= S3C_PA_UART & 0xfff00000,
-	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
 
 	.init_irq	= s3c6410_init_irq,
diff --git a/arch/arm/mach-s5p6440/Kconfig b/arch/arm/mach-s5p6440/Kconfig
deleted file mode 100644
index 6a4af7f5758..00000000000
--- a/arch/arm/mach-s5p6440/Kconfig
+++ /dev/null
@@ -1,33 +0,0 @@
-# arch/arm/mach-s5p6440/Kconfig
-#
-# Copyright (c) 2009 Samsung Electronics Co., Ltd.
-#		http://www.samsung.com/
-#
-# Licensed under GPLv2
-
-if ARCH_S5P6440
-
-config CPU_S5P6440
-	bool
-	select S3C_PL330_DMA
-	help
-	  Enable S5P6440 CPU support
-
-config S5P6440_SETUP_I2C1
-	bool
-	help
-	  Common setup code for i2c bus 1.
-
-config MACH_SMDK6440
-	bool "SMDK6440"
-	select CPU_S5P6440
-	select S3C_DEV_I2C1
-	select S3C_DEV_RTC
-	select S3C_DEV_WDT
-	select SAMSUNG_DEV_ADC
-	select SAMSUNG_DEV_TS
-	select S5P6440_SETUP_I2C1
-	help
-	  Machine support for the Samsung SMDK6440
-
-endif
diff --git a/arch/arm/mach-s5p6440/Makefile b/arch/arm/mach-s5p6440/Makefile
deleted file mode 100644
index c3fe4d3662a..00000000000
--- a/arch/arm/mach-s5p6440/Makefile
+++ /dev/null
@@ -1,25 +0,0 @@
-# arch/arm/mach-s5p6440/Makefile
-#
-# Copyright (c) 2009 Samsung Electronics Co., Ltd.
-# 		http://www.samsung.com/
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:=
-obj-				:=
-
-# Core support for S5P6440 system
-
-obj-$(CONFIG_CPU_S5P6440)	+= cpu.o init.o clock.o gpio.o dma.o
-obj-$(CONFIG_CPU_S5P6440)	+= setup-i2c0.o
-
-# machine support
-
-obj-$(CONFIG_MACH_SMDK6440)	+= mach-smdk6440.o
-
-# device support
-obj-y				+= dev-audio.o
-obj-$(CONFIG_S3C64XX_DEV_SPI)	+= dev-spi.o
-obj-$(CONFIG_S5P6440_SETUP_I2C1)	+= setup-i2c1.o
diff --git a/arch/arm/mach-s5p6440/clock.c b/arch/arm/mach-s5p6440/clock.c
deleted file mode 100644
index ca6e48dce77..00000000000
--- a/arch/arm/mach-s5p6440/clock.c
+++ /dev/null
@@ -1,846 +0,0 @@
-/* linux/arch/arm/mach-s5p6440/clock.c
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P6440 - Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/sysdev.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/cpu-freq.h>
-#include <mach/regs-clock.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/clock-clksrc.h>
-#include <plat/s5p-clock.h>
-#include <plat/pll.h>
-#include <plat/s5p6440.h>
-
-/* APLL Mux output clock */
-static struct clksrc_clk clk_mout_apll = {
-	.clk    = {
-		.name           = "mout_apll",
-		.id             = -1,
-	},
-	.sources        = &clk_src_apll,
-	.reg_src        = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 },
-};
-
-static int s5p6440_epll_enable(struct clk *clk, int enable)
-{
-	unsigned int ctrlbit = clk->ctrlbit;
-	unsigned int epll_con = __raw_readl(S5P_EPLL_CON) & ~ctrlbit;
-
-	if (enable)
-		__raw_writel(epll_con | ctrlbit, S5P_EPLL_CON);
-	else
-		__raw_writel(epll_con, S5P_EPLL_CON);
-
-	return 0;
-}
-
-static unsigned long s5p6440_epll_get_rate(struct clk *clk)
-{
-	return clk->rate;
-}
-
-static u32 epll_div[][5] = {
-	{ 36000000,	0,	48, 1, 4 },
-	{ 48000000,	0,	32, 1, 3 },
-	{ 60000000,	0,	40, 1, 3 },
-	{ 72000000,	0,	48, 1, 3 },
-	{ 84000000,	0,	28, 1, 2 },
-	{ 96000000,	0,	32, 1, 2 },
-	{ 32768000,	45264,	43, 1, 4 },
-	{ 45158000,	6903,	30, 1, 3 },
-	{ 49152000,	50332,	32, 1, 3 },
-	{ 67738000,	10398,	45, 1, 3 },
-	{ 73728000,	9961,	49, 1, 3 }
-};
-
-static int s5p6440_epll_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned int epll_con, epll_con_k;
-	unsigned int i;
-
-	if (clk->rate == rate)	/* Return if nothing changed */
-		return 0;
-
-	epll_con = __raw_readl(S5P_EPLL_CON);
-	epll_con_k = __raw_readl(S5P_EPLL_CON_K);
-
-	epll_con_k &= ~(PLL90XX_KDIV_MASK);
-	epll_con &= ~(PLL90XX_MDIV_MASK | PLL90XX_PDIV_MASK | PLL90XX_SDIV_MASK);
-
-	for (i = 0; i < ARRAY_SIZE(epll_div); i++) {
-		 if (epll_div[i][0] == rate) {
-			epll_con_k |= (epll_div[i][1] << PLL90XX_KDIV_SHIFT);
-			epll_con |= (epll_div[i][2] << PLL90XX_MDIV_SHIFT) |
-				    (epll_div[i][3] << PLL90XX_PDIV_SHIFT) |
-				    (epll_div[i][4] << PLL90XX_SDIV_SHIFT);
-			break;
-		}
-	}
-
-	if (i == ARRAY_SIZE(epll_div)) {
-		printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__);
-		return -EINVAL;
-	}
-
-	__raw_writel(epll_con, S5P_EPLL_CON);
-	__raw_writel(epll_con_k, S5P_EPLL_CON_K);
-
-	clk->rate = rate;
-
-	return 0;
-}
-
-static struct clk_ops s5p6440_epll_ops = {
-	.get_rate = s5p6440_epll_get_rate,
-	.set_rate = s5p6440_epll_set_rate,
-};
-
-static struct clksrc_clk clk_mout_epll = {
-	.clk    = {
-		.name           = "mout_epll",
-		.id             = -1,
-	},
-	.sources        = &clk_src_epll,
-	.reg_src        = { .reg = S5P_CLK_SRC0, .shift = 2, .size = 1 },
-};
-
-static struct clksrc_clk clk_mout_mpll = {
-	.clk = {
-		.name           = "mout_mpll",
-		.id             = -1,
-	},
-	.sources        = &clk_src_mpll,
-	.reg_src        = { .reg = S5P_CLK_SRC0, .shift = 1, .size = 1 },
-};
-
-enum perf_level {
-	L0 = 532*1000,
-	L1 = 266*1000,
-	L2 = 133*1000,
-};
-
-static const u32 clock_table[][3] = {
-	/*{ARM_CLK, DIVarm, DIVhclk}*/
-	{L0 * 1000, (0 << ARM_DIV_RATIO_SHIFT), (3 << S5P_CLKDIV0_HCLK_SHIFT)},
-	{L1 * 1000, (1 << ARM_DIV_RATIO_SHIFT), (1 << S5P_CLKDIV0_HCLK_SHIFT)},
-	{L2 * 1000, (3 << ARM_DIV_RATIO_SHIFT), (0 << S5P_CLKDIV0_HCLK_SHIFT)},
-};
-
-static unsigned long s5p6440_armclk_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	u32 clkdiv;
-
-	/* divisor mask starts at bit0, so no need to shift */
-	clkdiv = __raw_readl(ARM_CLK_DIV) & ARM_DIV_MASK;
-
-	return rate / (clkdiv + 1);
-}
-
-static unsigned long s5p6440_armclk_round_rate(struct clk *clk,
-						unsigned long rate)
-{
-	u32 iter;
-
-	for (iter = 1 ; iter < ARRAY_SIZE(clock_table) ; iter++) {
-		if (rate > clock_table[iter][0])
-			return clock_table[iter-1][0];
-	}
-
-	return clock_table[ARRAY_SIZE(clock_table) - 1][0];
-}
-
-static int s5p6440_armclk_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 round_tmp;
-	u32 iter;
-	u32 clk_div0_tmp;
-	u32 cur_rate = clk->ops->get_rate(clk);
-	unsigned long flags;
-
-	round_tmp = clk->ops->round_rate(clk, rate);
-	if (round_tmp == cur_rate)
-		return 0;
-
-
-	for (iter = 0 ; iter < ARRAY_SIZE(clock_table) ; iter++) {
-		if (round_tmp == clock_table[iter][0])
-			break;
-	}
-
-	if (iter >= ARRAY_SIZE(clock_table))
-		iter = ARRAY_SIZE(clock_table) - 1;
-
-	local_irq_save(flags);
-	if (cur_rate > round_tmp) {
-		/* Frequency Down */
-		clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK);
-		clk_div0_tmp |= clock_table[iter][1];
-		__raw_writel(clk_div0_tmp, ARM_CLK_DIV);
-
-		clk_div0_tmp = __raw_readl(ARM_CLK_DIV) &
-				~(S5P_CLKDIV0_HCLK_MASK);
-		clk_div0_tmp |= clock_table[iter][2];
-		__raw_writel(clk_div0_tmp, ARM_CLK_DIV);
-
-
-	} else {
-		/* Frequency Up */
-		clk_div0_tmp = __raw_readl(ARM_CLK_DIV) &
-				~(S5P_CLKDIV0_HCLK_MASK);
-		clk_div0_tmp |= clock_table[iter][2];
-		__raw_writel(clk_div0_tmp, ARM_CLK_DIV);
-
-		clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK);
-		clk_div0_tmp |= clock_table[iter][1];
-		__raw_writel(clk_div0_tmp, ARM_CLK_DIV);
-		}
-	local_irq_restore(flags);
-
-	clk->rate = clock_table[iter][0];
-
-	return 0;
-}
-
-static struct clk_ops s5p6440_clkarm_ops = {
-	.get_rate	= s5p6440_armclk_get_rate,
-	.set_rate	= s5p6440_armclk_set_rate,
-	.round_rate	= s5p6440_armclk_round_rate,
-};
-
-static struct clksrc_clk clk_armclk = {
-	.clk	= {
-		.name	= "armclk",
-		.id	= 1,
-		.parent	= &clk_mout_apll.clk,
-		.ops	= &s5p6440_clkarm_ops,
-	},
-	.reg_div	= { .reg = S5P_CLK_DIV0, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk clk_dout_mpll = {
-	.clk	= {
-		.name	= "dout_mpll",
-		.id	= -1,
-		.parent	= &clk_mout_mpll.clk,
-	},
-	.reg_div	= { .reg = S5P_CLK_DIV0, .shift = 4, .size = 1 },
-};
-
-static struct clksrc_clk clk_hclk = {
-	.clk	= {
-		.name	= "clk_hclk",
-		.id	= -1,
-		.parent	= &clk_armclk.clk,
-	},
-	.reg_div	= { .reg = S5P_CLK_DIV0, .shift = 8, .size = 4 },
-};
-
-static struct clksrc_clk clk_pclk = {
-	.clk	= {
-		.name	= "clk_pclk",
-		.id	= -1,
-		.parent	= &clk_hclk.clk,
-	},
-	.reg_div = { .reg = S5P_CLK_DIV0, .shift = 12, .size = 4 },
-};
-
-static struct clk *clkset_hclklow_list[] = {
-	&clk_mout_apll.clk,
-	&clk_mout_mpll.clk,
-};
-
-static struct clksrc_sources clkset_hclklow = {
-	.sources	= clkset_hclklow_list,
-	.nr_sources	= ARRAY_SIZE(clkset_hclklow_list),
-};
-
-static struct clksrc_clk clk_hclk_low = {
-	.clk = {
-		.name	= "hclk_low",
-		.id	= -1,
-	},
-	.sources	= &clkset_hclklow,
-	.reg_src	= { .reg = S5P_SYS_OTHERS, .shift = 6, .size = 1 },
-	.reg_div	= { .reg = S5P_CLK_DIV3, .shift = 8, .size = 4 },
-};
-
-static struct clksrc_clk clk_pclk_low = {
-	.clk	= {
-		.name	= "pclk_low",
-		.id	= -1,
-		.parent	= &clk_hclk_low.clk,
-	},
-	.reg_div = { .reg = S5P_CLK_DIV3, .shift = 12, .size = 4 },
-};
-
-int s5p6440_clk48m_ctrl(struct clk *clk, int enable)
-{
-	unsigned long flags;
-	u32 val;
-
-	/* can't rely on clock lock, this register has other usages */
-	local_irq_save(flags);
-
-	val = __raw_readl(S5P_OTHERS);
-	if (enable)
-		val |= S5P_OTHERS_USB_SIG_MASK;
-	else
-		val &= ~S5P_OTHERS_USB_SIG_MASK;
-
-	__raw_writel(val, S5P_OTHERS);
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-static int s5p6440_pclk_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLK_GATE_PCLK, clk, enable);
-}
-
-static int s5p6440_hclk0_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLK_GATE_HCLK0, clk, enable);
-}
-
-static int s5p6440_hclk1_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLK_GATE_HCLK1, clk, enable);
-}
-
-static int s5p6440_sclk_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLK_GATE_SCLK0, clk, enable);
-}
-
-static int s5p6440_sclk1_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLK_GATE_SCLK1, clk, enable);
-}
-
-static int s5p6440_mem_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLK_GATE_MEM0, clk, enable);
-}
-
-/*
- * The following clocks will be disabled during clock initialization. It is
- * recommended to keep the following clocks disabled until the driver requests
- * for enabling the clock.
- */
-static struct clk init_clocks_disable[] = {
-	{
-		.name		= "nand",
-		.id		= -1,
-		.parent		= &clk_hclk.clk,
-		.enable		= s5p6440_mem_ctrl,
-		.ctrlbit	= S5P_CLKCON_MEM0_HCLK_NFCON,
-	}, {
-		.name		= "adc",
-		.id		= -1,
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_PCLK_TSADC,
-	}, {
-		.name		= "i2c",
-		.id		= -1,
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_PCLK_IIC0,
-	}, {
-		.name		= "i2s_v40",
-		.id		= 0,
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_PCLK_IIS2,
-	}, {
-		.name		= "spi",
-		.id		= 0,
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_PCLK_SPI0,
-	}, {
-		.name		= "spi",
-		.id		= 1,
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_PCLK_SPI1,
-	}, {
-		.name		= "sclk_spi_48",
-		.id		= 0,
-		.parent		= &clk_48m,
-		.enable		= s5p6440_sclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_SCLK0_SPI0_48,
-	}, {
-		.name		= "sclk_spi_48",
-		.id		= 1,
-		.parent		= &clk_48m,
-		.enable		= s5p6440_sclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_SCLK0_SPI1_48,
-	}, {
-		.name		= "mmc_48m",
-		.id		= 0,
-		.parent		= &clk_48m,
-		.enable		= s5p6440_sclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_SCLK0_MMC0_48,
-	}, {
-		.name		= "mmc_48m",
-		.id		= 1,
-		.parent		= &clk_48m,
-		.enable		= s5p6440_sclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_SCLK0_MMC1_48,
-	}, {
-		.name		= "mmc_48m",
-		.id		= 2,
-		.parent		= &clk_48m,
-		.enable		= s5p6440_sclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_SCLK0_MMC2_48,
-	}, {
-		.name    	= "otg",
-		.id	   	= -1,
-		.parent		= &clk_hclk_low.clk,
-		.enable  	= s5p6440_hclk0_ctrl,
-		.ctrlbit 	= S5P_CLKCON_HCLK0_USB
-	}, {
-		.name    	= "post",
-		.id	   	= -1,
-		.parent		= &clk_hclk_low.clk,
-		.enable  	= s5p6440_hclk0_ctrl,
-		.ctrlbit 	= S5P_CLKCON_HCLK0_POST0
-	}, {
-		.name		= "lcd",
-		.id		= -1,
-		.parent		= &clk_hclk_low.clk,
-		.enable		= s5p6440_hclk1_ctrl,
-		.ctrlbit	= S5P_CLKCON_HCLK1_DISPCON,
-	}, {
-		.name		= "hsmmc",
-		.id		= 0,
-		.parent		= &clk_hclk_low.clk,
-		.enable		= s5p6440_hclk0_ctrl,
-		.ctrlbit	= S5P_CLKCON_HCLK0_HSMMC0,
-	}, {
-		.name		= "hsmmc",
-		.id		= 1,
-		.parent		= &clk_hclk_low.clk,
-		.enable		= s5p6440_hclk0_ctrl,
-		.ctrlbit	= S5P_CLKCON_HCLK0_HSMMC1,
-	}, {
-		.name		= "hsmmc",
-		.id		= 2,
-		.parent		= &clk_hclk_low.clk,
-		.enable		= s5p6440_hclk0_ctrl,
-		.ctrlbit	= S5P_CLKCON_HCLK0_HSMMC2,
-	}, {
-		.name		= "rtc",
-		.id		= -1,
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_PCLK_RTC,
-	}, {
-		.name		= "watchdog",
-		.id		= -1,
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_PCLK_WDT,
-	}, {
-		.name		= "timers",
-		.id		= -1,
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_PCLK_PWM,
-	}, {
-		.name		= "hclk_fimgvg",
-		.id		= -1,
-		.parent		= &clk_hclk.clk,
-		.enable		= s5p6440_hclk1_ctrl,
-		.ctrlbit	= (1 << 2),
-	}, {
-		.name		= "tsi",
-		.id		= -1,
-		.parent		= &clk_hclk_low.clk,
-		.enable		= s5p6440_hclk1_ctrl,
-		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "pclk_fimgvg",
-		.id		= -1,
-		.parent		= &clk_pclk.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= (1 << 31),
-	}, {
-		.name		= "dmc0",
-		.id		= -1,
-		.parent		= &clk_pclk.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= (1 << 30),
-	}, {
-		.name		= "etm",
-		.id		= -1,
-		.parent		= &clk_pclk.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= (1 << 29),
-	}, {
-		.name		= "dsim",
-		.id		= -1,
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= (1 << 28),
-	}, {
-		.name		= "gps",
-		.id		= -1,
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= (1 << 25),
-	}, {
-		.name		= "pcm",
-		.id		= -1,
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= (1 << 8),
-	}, {
-		.name		= "irom",
-		.id		= -1,
-		.parent		= &clk_hclk.clk,
-		.enable		= s5p6440_hclk0_ctrl,
-		.ctrlbit	= (1 << 25),
-	}, {
-		.name		= "dma",
-		.id		= -1,
-		.parent		= &clk_hclk_low.clk,
-		.enable		= s5p6440_hclk0_ctrl,
-		.ctrlbit	= (1 << 12),
-	}, {
-		.name		= "2d",
-		.id		= -1,
-		.parent		= &clk_hclk.clk,
-		.enable		= s5p6440_hclk0_ctrl,
-		.ctrlbit	= (1 << 8),
-	},
-};
-
-/*
- * The following clocks will be enabled during clock initialization.
- */
-static struct clk init_clocks[] = {
-	{
-		.name		= "gpio",
-		.id		= -1,
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_PCLK_GPIO,
-	}, {
-		.name		= "uart",
-		.id		= 0,
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_PCLK_UART0,
-	}, {
-		.name		= "uart",
-		.id		= 1,
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_PCLK_UART1,
-	}, {
-		.name		= "uart",
-		.id		= 2,
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_PCLK_UART2,
-	}, {
-		.name		= "uart",
-		.id		= 3,
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_PCLK_UART3,
-	}, {
-		.name		= "mem",
-		.id		= -1,
-		.parent		= &clk_hclk.clk,
-		.enable		= s5p6440_hclk0_ctrl,
-		.ctrlbit	= (1 << 21),
-	}, {
-		.name		= "intc",
-		.id		= -1,
-		.parent		= &clk_hclk.clk,
-		.enable		= s5p6440_hclk0_ctrl,
-		.ctrlbit	= (1 << 1),
-	},
-};
-
-static struct clk clk_iis_cd_v40 = {
-	.name		= "iis_cdclk_v40",
-	.id		= -1,
-};
-
-static struct clk clk_pcm_cd = {
-	.name		= "pcm_cdclk",
-	.id		= -1,
-};
-
-static struct clk *clkset_group1_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll.clk,
-	&clk_fin_epll,
-};
-
-static struct clksrc_sources clkset_group1 = {
-	.sources	= clkset_group1_list,
-	.nr_sources	= ARRAY_SIZE(clkset_group1_list),
-};
-
-static struct clk *clkset_uart_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll.clk,
-};
-
-static struct clksrc_sources clkset_uart = {
-	.sources	= clkset_uart_list,
-	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
-};
-
-static struct clk *clkset_audio_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll.clk,
-	&clk_fin_epll,
-	&clk_iis_cd_v40,
-	&clk_pcm_cd,
-};
-
-static struct clksrc_sources clkset_audio = {
-	.sources	= clkset_audio_list,
-	.nr_sources	= ARRAY_SIZE(clkset_audio_list),
-};
-
-static struct clksrc_clk clksrcs[] = {
-	{
-		.clk	= {
-			.name		= "mmc_bus",
-			.id		= 0,
-			.ctrlbit        = S5P_CLKCON_SCLK0_MMC0,
-			.enable		= s5p6440_sclk_ctrl,
-		},
-		.sources = &clkset_group1,
-		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 18, .size = 2 },
-		.reg_div = { .reg = S5P_CLK_DIV1, .shift = 0, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "mmc_bus",
-			.id		= 1,
-			.ctrlbit        = S5P_CLKCON_SCLK0_MMC1,
-			.enable		= s5p6440_sclk_ctrl,
-		},
-		.sources = &clkset_group1,
-		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 20, .size = 2 },
-		.reg_div = { .reg = S5P_CLK_DIV1, .shift = 4, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "mmc_bus",
-			.id		= 2,
-			.ctrlbit        = S5P_CLKCON_SCLK0_MMC2,
-			.enable		= s5p6440_sclk_ctrl,
-		},
-		.sources = &clkset_group1,
-		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 22, .size = 2 },
-		.reg_div = { .reg = S5P_CLK_DIV1, .shift = 8, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "uclk1",
-			.id		= -1,
-			.ctrlbit        = S5P_CLKCON_SCLK0_UART,
-			.enable		= s5p6440_sclk_ctrl,
-		},
-		.sources = &clkset_uart,
-		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 13, .size = 1 },
-		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 16, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "spi_epll",
-			.id		= 0,
-			.ctrlbit        = S5P_CLKCON_SCLK0_SPI0,
-			.enable		= s5p6440_sclk_ctrl,
-		},
-		.sources = &clkset_group1,
-		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 14, .size = 2 },
-		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 0, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "spi_epll",
-			.id		= 1,
-			.ctrlbit        = S5P_CLKCON_SCLK0_SPI1,
-			.enable		= s5p6440_sclk_ctrl,
-		},
-		.sources = &clkset_group1,
-		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 16, .size = 2 },
-		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 4, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_post",
-			.id		= -1,
-			.ctrlbit	= (1 << 10),
-			.enable		= s5p6440_sclk_ctrl,
-		},
-		.sources = &clkset_group1,
-		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 26, .size = 2 },
-		.reg_div = { .reg = S5P_CLK_DIV1, .shift = 12, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_dispcon",
-			.id		= -1,
-			.ctrlbit	= (1 << 1),
-			.enable		= s5p6440_sclk1_ctrl,
-		},
-		.sources = &clkset_group1,
-		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 2 },
-		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 0, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_fimgvg",
-			.id		= -1,
-			.ctrlbit	= (1 << 2),
-			.enable		= s5p6440_sclk1_ctrl,
-		},
-		.sources = &clkset_group1,
-		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 8, .size = 2 },
-		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 4, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_audio2",
-			.id		= -1,
-			.ctrlbit	= (1 << 11),
-			.enable		= s5p6440_sclk_ctrl,
-		},
-		.sources = &clkset_audio,
-		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 0, .size = 3 },
-		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 24, .size = 4 },
-	},
-};
-
-/* Clock initialisation code */
-static struct clksrc_clk *sysclks[] = {
-	&clk_mout_apll,
-	&clk_mout_epll,
-	&clk_mout_mpll,
-	&clk_dout_mpll,
-	&clk_armclk,
-	&clk_hclk,
-	&clk_pclk,
-	&clk_hclk_low,
-	&clk_pclk_low,
-};
-
-void __init_or_cpufreq s5p6440_setup_clocks(void)
-{
-	struct clk *xtal_clk;
-	unsigned long xtal;
-	unsigned long fclk;
-	unsigned long hclk;
-	unsigned long hclk_low;
-	unsigned long pclk;
-	unsigned long pclk_low;
-	unsigned long epll;
-	unsigned long apll;
-	unsigned long mpll;
-	unsigned int ptr;
-
-	/* Set S5P6440 functions for clk_fout_epll */
-	clk_fout_epll.enable = s5p6440_epll_enable;
-	clk_fout_epll.ops = &s5p6440_epll_ops;
-
-	clk_48m.enable = s5p6440_clk48m_ctrl;
-
-	xtal_clk = clk_get(NULL, "ext_xtal");
-	BUG_ON(IS_ERR(xtal_clk));
-
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	epll = s5p_get_pll90xx(xtal, __raw_readl(S5P_EPLL_CON),
-				__raw_readl(S5P_EPLL_CON_K));
-	mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502);
-	apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4502);
-
-	clk_fout_mpll.rate = mpll;
-	clk_fout_epll.rate = epll;
-	clk_fout_apll.rate = apll;
-
-	printk(KERN_INFO "S5P6440: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz," \
-			" E=%ld.%ldMHz\n",
-			print_mhz(apll), print_mhz(mpll), print_mhz(epll));
-
-	fclk = clk_get_rate(&clk_armclk.clk);
-	hclk = clk_get_rate(&clk_hclk.clk);
-	pclk = clk_get_rate(&clk_pclk.clk);
-	hclk_low = clk_get_rate(&clk_hclk_low.clk);
-	pclk_low = clk_get_rate(&clk_pclk_low.clk);
-
-	printk(KERN_INFO "S5P6440: HCLK=%ld.%ldMHz, HCLK_LOW=%ld.%ldMHz," \
-			" PCLK=%ld.%ldMHz, PCLK_LOW=%ld.%ldMHz\n",
-			print_mhz(hclk), print_mhz(hclk_low),
-			print_mhz(pclk), print_mhz(pclk_low));
-
-	clk_f.rate = fclk;
-	clk_h.rate = hclk;
-	clk_p.rate = pclk;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
-		s3c_set_clksrc(&clksrcs[ptr], true);
-}
-
-static struct clk *clks[] __initdata = {
-	&clk_ext,
-	&clk_iis_cd_v40,
-	&clk_pcm_cd,
-};
-
-void __init s5p6440_register_clocks(void)
-{
-	struct clk *clkp;
-	int ret;
-	int ptr;
-
-	ret = s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-	if (ret > 0)
-		printk(KERN_ERR "Failed to register %u clocks\n", ret);
-
-	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
-		s3c_register_clksrc(sysclks[ptr], 1);
-
-	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
-	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
-
-	clkp = init_clocks_disable;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-		(clkp->enable)(clkp, 0);
-	}
-
-	s3c_pwmclk_init();
-}
diff --git a/arch/arm/mach-s5p6440/cpu.c b/arch/arm/mach-s5p6440/cpu.c
deleted file mode 100644
index ec592e86605..00000000000
--- a/arch/arm/mach-s5p6440/cpu.c
+++ /dev/null
@@ -1,117 +0,0 @@
-/* linux/arch/arm/mach-s5p6440/cpu.c
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/sysdev.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/sched.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/proc-fns.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <asm/irq.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-#include <plat/s5p6440.h>
-#include <plat/adc-core.h>
-
-static void s5p6440_idle(void)
-{
-	unsigned long val;
-
-	if (!need_resched()) {
-		val = __raw_readl(S5P_PWR_CFG);
-		val &= ~(0x3<<5);
-		val |= (0x1<<5);
-		__raw_writel(val, S5P_PWR_CFG);
-
-		cpu_do_idle();
-	}
-	local_irq_enable();
-}
-
-/* s5p6440_map_io
- *
- * register the standard cpu IO areas
-*/
-
-void __init s5p6440_map_io(void)
-{
-	/* initialize any device information early */
-	s3c_adc_setname("s3c64xx-adc");
-}
-
-void __init s5p6440_init_clocks(int xtal)
-{
-	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
-
-	s3c24xx_register_baseclocks(xtal);
-	s5p_register_clocks(xtal);
-	s5p6440_register_clocks();
-	s5p6440_setup_clocks();
-}
-
-void __init s5p6440_init_irq(void)
-{
-	/* S5P6440 supports only 2 VIC */
-	u32 vic[2];
-
-	/*
-	 * VIC0 is missing IRQ_VIC0[3, 4, 8, 10, (12-22)]
-	 * VIC1 is missing IRQ VIC1[1, 3, 4, 10, 11, 12, 14, 15, 22]
-	 */
-	vic[0] = 0xff800ae7;
-	vic[1] = 0xffbf23e5;
-
-	s5p_init_irq(vic, ARRAY_SIZE(vic));
-}
-
-struct sysdev_class s5p6440_sysclass = {
-	.name	= "s5p6440-core",
-};
-
-static struct sys_device s5p6440_sysdev = {
-	.cls	= &s5p6440_sysclass,
-};
-
-static int __init s5p6440_core_init(void)
-{
-	return sysdev_class_register(&s5p6440_sysclass);
-}
-
-core_initcall(s5p6440_core_init);
-
-int __init s5p6440_init(void)
-{
-	printk(KERN_INFO "S5P6440: Initializing architecture\n");
-
-	/* set idle function */
-	pm_idle = s5p6440_idle;
-
-	return sysdev_register(&s5p6440_sysdev);
-}
diff --git a/arch/arm/mach-s5p6440/dev-audio.c b/arch/arm/mach-s5p6440/dev-audio.c
deleted file mode 100644
index 3ca0d2b8275..00000000000
--- a/arch/arm/mach-s5p6440/dev-audio.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/* linux/arch/arm/mach-s5p6440/dev-audio.c
- *
- * Copyright (c) 2010 Samsung Electronics Co. Ltd
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/audio.h>
-
-#include <mach/map.h>
-#include <mach/dma.h>
-#include <mach/irqs.h>
-
-static int s5p6440_cfg_i2s(struct platform_device *pdev)
-{
-	/* configure GPIO for i2s port */
-	switch (pdev->id) {
-	case -1:
-		s3c_gpio_cfgpin(S5P6440_GPR(4), S3C_GPIO_SFN(5));
-		s3c_gpio_cfgpin(S5P6440_GPR(5), S3C_GPIO_SFN(5));
-		s3c_gpio_cfgpin(S5P6440_GPR(6), S3C_GPIO_SFN(5));
-		s3c_gpio_cfgpin(S5P6440_GPR(7), S3C_GPIO_SFN(5));
-		s3c_gpio_cfgpin(S5P6440_GPR(8), S3C_GPIO_SFN(5));
-		s3c_gpio_cfgpin(S5P6440_GPR(13), S3C_GPIO_SFN(5));
-		s3c_gpio_cfgpin(S5P6440_GPR(14), S3C_GPIO_SFN(5));
-		break;
-
-	default:
-		printk(KERN_ERR "Invalid Device %d\n", pdev->id);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static struct s3c_audio_pdata s3c_i2s_pdata = {
-	.cfg_gpio = s5p6440_cfg_i2s,
-};
-
-static struct resource s5p6440_iis0_resource[] = {
-	[0] = {
-		.start = S5P6440_PA_I2S,
-		.end   = S5P6440_PA_I2S + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_I2S0_TX,
-		.end   = DMACH_I2S0_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_I2S0_RX,
-		.end   = DMACH_I2S0_RX,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-struct platform_device s5p6440_device_iis = {
-	.name		  = "s3c64xx-iis-v4",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s5p6440_iis0_resource),
-	.resource	  = s5p6440_iis0_resource,
-	.dev = {
-		.platform_data = &s3c_i2s_pdata,
-	},
-};
-
-/* PCM Controller platform_devices */
-
-static int s5p6440_pcm_cfg_gpio(struct platform_device *pdev)
-{
-	switch (pdev->id) {
-	case 0:
-		s3c_gpio_cfgpin(S5P6440_GPR(7), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6440_GPR(13), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6440_GPR(14), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6440_GPR(8), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6440_GPR(6), S3C_GPIO_SFN(2));
-		break;
-
-	default:
-		printk(KERN_DEBUG "Invalid PCM Controller number!");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static struct s3c_audio_pdata s3c_pcm_pdata = {
-	.cfg_gpio = s5p6440_pcm_cfg_gpio,
-};
-
-static struct resource s5p6440_pcm0_resource[] = {
-	[0] = {
-		.start = S5P6440_PA_PCM,
-		.end   = S5P6440_PA_PCM + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_PCM0_TX,
-		.end   = DMACH_PCM0_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_PCM0_RX,
-		.end   = DMACH_PCM0_RX,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-struct platform_device s5p6440_device_pcm = {
-	.name		  = "samsung-pcm",
-	.id		  = 0,
-	.num_resources	  = ARRAY_SIZE(s5p6440_pcm0_resource),
-	.resource	  = s5p6440_pcm0_resource,
-	.dev = {
-		.platform_data = &s3c_pcm_pdata,
-	},
-};
diff --git a/arch/arm/mach-s5p6440/dev-spi.c b/arch/arm/mach-s5p6440/dev-spi.c
deleted file mode 100644
index 510af44d180..00000000000
--- a/arch/arm/mach-s5p6440/dev-spi.c
+++ /dev/null
@@ -1,176 +0,0 @@
-/* linux/arch/arm/mach-s5p6440/dev-spi.c
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-
-#include <mach/dma.h>
-#include <mach/map.h>
-#include <mach/irqs.h>
-#include <mach/spi-clocks.h>
-
-#include <plat/s3c64xx-spi.h>
-#include <plat/gpio-cfg.h>
-
-static char *spi_src_clks[] = {
-	[S5P6440_SPI_SRCCLK_PCLK] = "pclk",
-	[S5P6440_SPI_SRCCLK_SCLK] = "spi_epll",
-};
-
-/* SPI Controller platform_devices */
-
-/* Since we emulate multi-cs capability, we do not touch the CS.
- * The emulated CS is toggled by board specific mechanism, as it can
- * be either some immediate GPIO or some signal out of some other
- * chip in between ... or some yet another way.
- * We simply do not assume anything about CS.
- */
-static int s5p6440_spi_cfg_gpio(struct platform_device *pdev)
-{
-	switch (pdev->id) {
-	case 0:
-		s3c_gpio_cfgpin(S5P6440_GPC(0), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6440_GPC(1), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6440_GPC(2), S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(S5P6440_GPC(0), S3C_GPIO_PULL_UP);
-		s3c_gpio_setpull(S5P6440_GPC(1), S3C_GPIO_PULL_UP);
-		s3c_gpio_setpull(S5P6440_GPC(2), S3C_GPIO_PULL_UP);
-		break;
-
-	case 1:
-		s3c_gpio_cfgpin(S5P6440_GPC(4), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6440_GPC(5), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6440_GPC(6), S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(S5P6440_GPC(4), S3C_GPIO_PULL_UP);
-		s3c_gpio_setpull(S5P6440_GPC(5), S3C_GPIO_PULL_UP);
-		s3c_gpio_setpull(S5P6440_GPC(6), S3C_GPIO_PULL_UP);
-		break;
-
-	default:
-		dev_err(&pdev->dev, "Invalid SPI Controller number!");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static struct resource s5p6440_spi0_resource[] = {
-	[0] = {
-		.start = S5P6440_PA_SPI0,
-		.end   = S5P6440_PA_SPI0 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_SPI0_TX,
-		.end   = DMACH_SPI0_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_SPI0_RX,
-		.end   = DMACH_SPI0_RX,
-		.flags = IORESOURCE_DMA,
-	},
-	[3] = {
-		.start = IRQ_SPI0,
-		.end   = IRQ_SPI0,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct s3c64xx_spi_info s5p6440_spi0_pdata = {
-	.cfg_gpio = s5p6440_spi_cfg_gpio,
-	.fifo_lvl_mask = 0x1ff,
-	.rx_lvl_offset = 15,
-};
-
-static u64 spi_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device s5p6440_device_spi0 = {
-	.name		  = "s3c64xx-spi",
-	.id		  = 0,
-	.num_resources	  = ARRAY_SIZE(s5p6440_spi0_resource),
-	.resource	  = s5p6440_spi0_resource,
-	.dev = {
-		.dma_mask		= &spi_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data = &s5p6440_spi0_pdata,
-	},
-};
-
-static struct resource s5p6440_spi1_resource[] = {
-	[0] = {
-		.start = S5P6440_PA_SPI1,
-		.end   = S5P6440_PA_SPI1 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_SPI1_TX,
-		.end   = DMACH_SPI1_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_SPI1_RX,
-		.end   = DMACH_SPI1_RX,
-		.flags = IORESOURCE_DMA,
-	},
-	[3] = {
-		.start = IRQ_SPI1,
-		.end   = IRQ_SPI1,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct s3c64xx_spi_info s5p6440_spi1_pdata = {
-	.cfg_gpio = s5p6440_spi_cfg_gpio,
-	.fifo_lvl_mask = 0x7f,
-	.rx_lvl_offset = 15,
-};
-
-struct platform_device s5p6440_device_spi1 = {
-	.name		  = "s3c64xx-spi",
-	.id		  = 1,
-	.num_resources	  = ARRAY_SIZE(s5p6440_spi1_resource),
-	.resource	  = s5p6440_spi1_resource,
-	.dev = {
-		.dma_mask		= &spi_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data = &s5p6440_spi1_pdata,
-	},
-};
-
-void __init s5p6440_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
-{
-	struct s3c64xx_spi_info *pd;
-
-	/* Reject invalid configuration */
-	if (!num_cs || src_clk_nr < 0
-			|| src_clk_nr > S5P6440_SPI_SRCCLK_SCLK) {
-		printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__);
-		return;
-	}
-
-	switch (cntrlr) {
-	case 0:
-		pd = &s5p6440_spi0_pdata;
-		break;
-	case 1:
-		pd = &s5p6440_spi1_pdata;
-		break;
-	default:
-		printk(KERN_ERR "%s: Invalid SPI controller(%d)\n",
-							__func__, cntrlr);
-		return;
-	}
-
-	pd->num_cs = num_cs;
-	pd->src_clk_nr = src_clk_nr;
-	pd->src_clk_name = spi_src_clks[src_clk_nr];
-}
diff --git a/arch/arm/mach-s5p6440/include/mach/debug-macro.S b/arch/arm/mach-s5p6440/include/mach/debug-macro.S
deleted file mode 100644
index 1347d7f9907..00000000000
--- a/arch/arm/mach-s5p6440/include/mach/debug-macro.S
+++ /dev/null
@@ -1,37 +0,0 @@
-/* linux/arch/arm/mach-s5p6440/include/mach/debug-macro.S
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* pull in the relevant register and map files. */
-
-#include <mach/map.h>
-#include <plat/regs-serial.h>
-
-	/* note, for the boot process to work we have to keep the UART
-	 * virtual address aligned to an 1MiB boundary for the L1
-	 * mapping the head code makes. We keep the UART virtual address
-	 * aligned and add in the offset when we load the value here.
-	 */
-
-	.macro addruart, rx, rtmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1
-		ldreq	\rx, = S3C_PA_UART
-		ldrne	\rx, = S3C_VA_UART
-#if CONFIG_DEBUG_S3C_UART != 0
-		add	\rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
-#endif
-	.endm
-
-/* include the reset of the code which will do the work, we're only
- * compiling for a single cpu processor type so the default of s3c2440
- * will be fine with us.
- */
-
-#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-s5p6440/include/mach/gpio.h b/arch/arm/mach-s5p6440/include/mach/gpio.h
deleted file mode 100644
index 21783834f2a..00000000000
--- a/arch/arm/mach-s5p6440/include/mach/gpio.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/* linux/arch/arm/mach-s5p6440/include/mach/gpio.h
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P6440 - GPIO lib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H __FILE__
-
-#define gpio_get_value	__gpio_get_value
-#define gpio_set_value	__gpio_set_value
-#define gpio_cansleep	__gpio_cansleep
-#define gpio_to_irq	__gpio_to_irq
-
-/* GPIO bank sizes */
-#define S5P6440_GPIO_A_NR	(6)
-#define S5P6440_GPIO_B_NR	(7)
-#define S5P6440_GPIO_C_NR	(8)
-#define S5P6440_GPIO_F_NR	(2)
-#define S5P6440_GPIO_G_NR	(7)
-#define S5P6440_GPIO_H_NR	(10)
-#define S5P6440_GPIO_I_NR	(16)
-#define S5P6440_GPIO_J_NR	(12)
-#define S5P6440_GPIO_N_NR	(16)
-#define S5P6440_GPIO_P_NR	(8)
-#define S5P6440_GPIO_R_NR	(15)
-
-/* GPIO bank numbers */
-
-/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
- * space for debugging purposes so that any accidental
- * change from one gpio bank to another can be caught.
-*/
-#define S5P6440_GPIO_NEXT(__gpio) \
-	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
-
-enum s5p_gpio_number {
-	S5P6440_GPIO_A_START = 0,
-	S5P6440_GPIO_B_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_A),
-	S5P6440_GPIO_C_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_B),
-	S5P6440_GPIO_F_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_C),
-	S5P6440_GPIO_G_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_F),
-	S5P6440_GPIO_H_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_G),
-	S5P6440_GPIO_I_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_H),
-	S5P6440_GPIO_J_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_I),
-	S5P6440_GPIO_N_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_J),
-	S5P6440_GPIO_P_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_N),
-	S5P6440_GPIO_R_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_P),
-};
-
-/* S5P6440 GPIO number definitions. */
-#define S5P6440_GPA(_nr)	(S5P6440_GPIO_A_START + (_nr))
-#define S5P6440_GPB(_nr)	(S5P6440_GPIO_B_START + (_nr))
-#define S5P6440_GPC(_nr)	(S5P6440_GPIO_C_START + (_nr))
-#define S5P6440_GPF(_nr)	(S5P6440_GPIO_F_START + (_nr))
-#define S5P6440_GPG(_nr)	(S5P6440_GPIO_G_START + (_nr))
-#define S5P6440_GPH(_nr)	(S5P6440_GPIO_H_START + (_nr))
-#define S5P6440_GPI(_nr)	(S5P6440_GPIO_I_START + (_nr))
-#define S5P6440_GPJ(_nr)	(S5P6440_GPIO_J_START + (_nr))
-#define S5P6440_GPN(_nr)	(S5P6440_GPIO_N_START + (_nr))
-#define S5P6440_GPP(_nr)	(S5P6440_GPIO_P_START + (_nr))
-#define S5P6440_GPR(_nr)	(S5P6440_GPIO_R_START + (_nr))
-
-/* the end of the S5P6440 specific gpios */
-#define S5P6440_GPIO_END	(S5P6440_GPR(S5P6440_GPIO_R_NR) + 1)
-#define S3C_GPIO_END		S5P6440_GPIO_END
-
-/* define the number of gpios we need to the one after the GPR() range */
-#define ARCH_NR_GPIOS		(S5P6440_GPR(S5P6440_GPIO_R_NR) +	\
-				 CONFIG_SAMSUNG_GPIO_EXTRA + 1)
-
-#include <asm-generic/gpio.h>
-
-#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/io.h b/arch/arm/mach-s5p6440/include/mach/io.h
deleted file mode 100644
index fa2d69cb1ad..00000000000
--- a/arch/arm/mach-s5p6440/include/mach/io.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* arch/arm/mach-s5p6440/include/mach/io.h
- *
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben-linux@fluff.org>
- *
- * Default IO routines for S3C64XX based
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-/* No current ISA/PCI bus support. */
-#define __io(a)		__typesafe_io(a)
-#define __mem_pci(a)	(a)
-
-#define IO_SPACE_LIMIT (0xFFFFFFFF)
-
-#endif
diff --git a/arch/arm/mach-s5p6440/include/mach/map.h b/arch/arm/mach-s5p6440/include/mach/map.h
deleted file mode 100644
index 6cc5cbc88ff..00000000000
--- a/arch/arm/mach-s5p6440/include/mach/map.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/* linux/arch/arm/mach-s5p6440/include/mach/map.h
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P6440 - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MAP_H
-#define __ASM_ARCH_MAP_H __FILE__
-
-#include <plat/map-base.h>
-#include <plat/map-s5p.h>
-
-#define S5P6440_PA_CHIPID	(0xE0000000)
-#define S5P_PA_CHIPID		S5P6440_PA_CHIPID
-
-#define S5P6440_PA_SYSCON	(0xE0100000)
-#define S5P6440_PA_CLK		(S5P6440_PA_SYSCON + 0x0)
-#define S5P_PA_SYSCON		S5P6440_PA_SYSCON
-
-#define S5P6440_PA_GPIO		(0xE0308000)
-#define S5P_PA_GPIO		S5P6440_PA_GPIO
-
-#define S5P6440_PA_VIC0		(0xE4000000)
-#define S5P_PA_VIC0		S5P6440_PA_VIC0
-
-#define S5P6440_PA_PDMA		0xE9000000
-
-#define S5P6440_PA_VIC1		(0xE4100000)
-#define S5P_PA_VIC1		S5P6440_PA_VIC1
-
-#define S5P6440_PA_TIMER	(0xEA000000)
-#define S5P_PA_TIMER		S5P6440_PA_TIMER
-
-#define S5P6440_PA_RTC		(0xEA100000)
-
-#define S5P6440_PA_WDT		(0xEA200000)
-#define S5P_PA_WDT		S5P6440_PA_WDT
-
-#define S5P6440_PA_UART		(0xEC000000)
-
-#define S5P_PA_UART0		(S5P6440_PA_UART + 0x0)
-#define S5P_PA_UART1		(S5P6440_PA_UART + 0x400)
-#define S5P_PA_UART2		(S5P6440_PA_UART + 0x800)
-#define S5P_PA_UART3		(S5P6440_PA_UART + 0xC00)
-
-#define S5P_SZ_UART		SZ_256
-
-#define S5P6440_PA_IIC0		(0xEC104000)
-#define S5P6440_PA_IIC1		(0xEC20F000)
-
-#define S5P6440_PA_SPI0		0xEC400000
-#define S5P6440_PA_SPI1		0xEC500000
-
-#define S5P6440_PA_HSOTG	(0xED100000)
-
-#define S5P6440_PA_HSMMC0	(0xED800000)
-#define S5P6440_PA_HSMMC1	(0xED900000)
-#define S5P6440_PA_HSMMC2	(0xEDA00000)
-
-#define S5P6440_PA_SDRAM	(0x20000000)
-#define S5P_PA_SDRAM		S5P6440_PA_SDRAM
-
-/* I2S */
-#define S5P6440_PA_I2S		0xF2000000
-
-/* PCM */
-#define S5P6440_PA_PCM		0xF2100000
-
-#define S5P6440_PA_ADC		(0xF3000000)
-
-/* compatibiltiy defines. */
-#define S3C_PA_UART		S5P6440_PA_UART
-#define S3C_PA_IIC		S5P6440_PA_IIC0
-#define S3C_PA_RTC		S5P6440_PA_RTC
-#define S3C_PA_IIC1		S5P6440_PA_IIC1
-#define S3C_PA_WDT		S5P6440_PA_WDT
-
-#define SAMSUNG_PA_ADC		S5P6440_PA_ADC
-
-#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/regs-clock.h b/arch/arm/mach-s5p6440/include/mach/regs-clock.h
deleted file mode 100644
index c783ecc9f19..00000000000
--- a/arch/arm/mach-s5p6440/include/mach/regs-clock.h
+++ /dev/null
@@ -1,130 +0,0 @@
-/* linux/arch/arm/mach-s5p6440/include/mach/regs-clock.h
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P6440 - Clock register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_CLOCK_H
-#define __ASM_ARCH_REGS_CLOCK_H __FILE__
-
-#include <mach/map.h>
-
-#define S5P_CLKREG(x)		(S3C_VA_SYS + (x))
-
-#define S5P_APLL_LOCK		S5P_CLKREG(0x00)
-#define S5P_MPLL_LOCK		S5P_CLKREG(0x04)
-#define S5P_EPLL_LOCK		S5P_CLKREG(0x08)
-#define S5P_APLL_CON		S5P_CLKREG(0x0C)
-#define S5P_MPLL_CON		S5P_CLKREG(0x10)
-#define S5P_EPLL_CON		S5P_CLKREG(0x14)
-#define S5P_EPLL_CON_K		S5P_CLKREG(0x18)
-#define S5P_CLK_SRC0		S5P_CLKREG(0x1C)
-#define S5P_CLK_DIV0		S5P_CLKREG(0x20)
-#define S5P_CLK_DIV1		S5P_CLKREG(0x24)
-#define S5P_CLK_DIV2		S5P_CLKREG(0x28)
-#define S5P_CLK_OUT		S5P_CLKREG(0x2C)
-#define S5P_CLK_GATE_HCLK0	S5P_CLKREG(0x30)
-#define S5P_CLK_GATE_PCLK	S5P_CLKREG(0x34)
-#define S5P_CLK_GATE_SCLK0	S5P_CLKREG(0x38)
-#define S5P_CLK_GATE_MEM0	S5P_CLKREG(0x3C)
-#define S5P_CLK_DIV3		S5P_CLKREG(0x40)
-#define S5P_CLK_GATE_HCLK1	S5P_CLKREG(0x44)
-#define S5P_CLK_GATE_SCLK1	S5P_CLKREG(0x48)
-#define S5P_AHB_CON0           	S5P_CLKREG(0x100)
-#define S5P_CLK_SRC1           	S5P_CLKREG(0x10C)
-#define S5P_SWRESET		S5P_CLKREG(0x114)
-#define S5P_SYS_ID		S5P_CLKREG(0x118)
-#define S5P_SYS_OTHERS		S5P_CLKREG(0x11C)
-#define S5P_MEM_CFG_STAT	S5P_CLKREG(0x12C)
-#define S5P_PWR_CFG		S5P_CLKREG(0x804)
-#define S5P_EINT_WAKEUP_MASK	S5P_CLKREG(0x808)
-#define S5P_NORMAL_CFG		S5P_CLKREG(0x810)
-#define S5P_STOP_CFG		S5P_CLKREG(0x814)
-#define S5P_SLEEP_CFG		S5P_CLKREG(0x818)
-#define S5P_OSC_FREQ		S5P_CLKREG(0x820)
-#define S5P_OSC_STABLE		S5P_CLKREG(0x824)
-#define S5P_PWR_STABLE		S5P_CLKREG(0x828)
-#define S5P_MTC_STABLE		S5P_CLKREG(0x830)
-#define S5P_OTHERS		S5P_CLKREG(0x900)
-#define S5P_RST_STAT		S5P_CLKREG(0x904)
-#define S5P_WAKEUP_STAT		S5P_CLKREG(0x908)
-#define S5P_SLPEN		S5P_CLKREG(0x930)
-#define S5P_INFORM0		S5P_CLKREG(0xA00)
-#define S5P_INFORM1		S5P_CLKREG(0xA04)
-#define S5P_INFORM2		S5P_CLKREG(0xA08)
-#define S5P_INFORM3		S5P_CLKREG(0xA0C)
-
-/* CLKDIV0 */
-#define S5P_CLKDIV0_PCLK_MASK		(0xf << 12)
-#define S5P_CLKDIV0_PCLK_SHIFT		(12)
-#define S5P_CLKDIV0_HCLK_MASK		(0xf << 8)
-#define S5P_CLKDIV0_HCLK_SHIFT		(8)
-#define S5P_CLKDIV0_MPLL_MASK		(0x1 << 4)
-#define S5P_CLKDIV0_ARM_MASK		(0xf << 0)
-#define S5P_CLKDIV0_ARM_SHIFT		(0)
-
-/* CLKDIV3 */
-#define S5P_CLKDIV3_PCLK_LOW_MASK	(0xf << 12)
-#define S5P_CLKDIV3_PCLK_LOW_SHIFT	(12)
-#define S5P_CLKDIV3_HCLK_LOW_MASK	(0xf << 8)
-#define S5P_CLKDIV3_HCLK_LOW_SHIFT	(8)
-
-/* HCLK0 GATE Registers */
-#define S5P_CLKCON_HCLK0_USB		(1<<20)
-#define S5P_CLKCON_HCLK0_HSMMC2		(1<<19)
-#define S5P_CLKCON_HCLK0_HSMMC1		(1<<18)
-#define S5P_CLKCON_HCLK0_HSMMC0		(1<<17)
-#define S5P_CLKCON_HCLK0_POST0		(1<<5)
-
-/* HCLK1 GATE Registers */
-#define S5P_CLKCON_HCLK1_DISPCON	(1<<1)
-
-/* PCLK GATE Registers */
-#define S5P_CLKCON_PCLK_IIS2		(1<<26)
-#define S5P_CLKCON_PCLK_SPI1		(1<<22)
-#define S5P_CLKCON_PCLK_SPI0		(1<<21)
-#define S5P_CLKCON_PCLK_GPIO		(1<<18)
-#define S5P_CLKCON_PCLK_IIC0		(1<<17)
-#define S5P_CLKCON_PCLK_TSADC		(1<<12)
-#define S5P_CLKCON_PCLK_PWM		(1<<7)
-#define S5P_CLKCON_PCLK_RTC		(1<<6)
-#define S5P_CLKCON_PCLK_WDT		(1<<5)
-#define S5P_CLKCON_PCLK_UART3		(1<<4)
-#define S5P_CLKCON_PCLK_UART2		(1<<3)
-#define S5P_CLKCON_PCLK_UART1		(1<<2)
-#define S5P_CLKCON_PCLK_UART0		(1<<1)
-
-/* SCLK0 GATE Registers */
-#define S5P_CLKCON_SCLK0_MMC2_48	(1<<29)
-#define S5P_CLKCON_SCLK0_MMC1_48	(1<<28)
-#define S5P_CLKCON_SCLK0_MMC0_48	(1<<27)
-#define S5P_CLKCON_SCLK0_MMC2		(1<<26)
-#define S5P_CLKCON_SCLK0_MMC1		(1<<25)
-#define S5P_CLKCON_SCLK0_MMC0		(1<<24)
-#define S5P_CLKCON_SCLK0_SPI1_48 	(1<<23)
-#define S5P_CLKCON_SCLK0_SPI0_48 	(1<<22)
-#define S5P_CLKCON_SCLK0_SPI1		(1<<21)
-#define S5P_CLKCON_SCLK0_SPI0		(1<<20)
-#define S5P_CLKCON_SCLK0_UART		(1<<5)
-
-/* SCLK1 GATE Registers */
-
-/* MEM0 GATE Registers */
-#define S5P_CLKCON_MEM0_HCLK_NFCON	(1<<2)
-
-/*OTHERS Resgister */
-#define S5P_OTHERS_USB_SIG_MASK		(1<<16)
-#define S5P_OTHERS_HCLK_LOW_SEL_MPLL	(1<<6)
-
-/* Compatibility defines */
-#define ARM_CLK_DIV			S5P_CLK_DIV0
-#define ARM_DIV_RATIO_SHIFT		0
-#define ARM_DIV_MASK			(0xf << ARM_DIV_RATIO_SHIFT)
-
-#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/spi-clocks.h b/arch/arm/mach-s5p6440/include/mach/spi-clocks.h
deleted file mode 100644
index 5fbca50d1cf..00000000000
--- a/arch/arm/mach-s5p6440/include/mach/spi-clocks.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* linux/arch/arm/mach-s5p6440/include/mach/spi-clocks.h
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __S5P6440_PLAT_SPI_CLKS_H
-#define __S5P6440_PLAT_SPI_CLKS_H __FILE__
-
-#define S5P6440_SPI_SRCCLK_PCLK		0
-#define S5P6440_SPI_SRCCLK_SCLK		1
-
-#endif /* __S5P6440_PLAT_SPI_CLKS_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/uncompress.h b/arch/arm/mach-s5p6440/include/mach/uncompress.h
deleted file mode 100644
index 7c1f600d65c..00000000000
--- a/arch/arm/mach-s5p6440/include/mach/uncompress.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* linux/arch/arm/mach-s5p6440/include/mach/uncompress.h
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P6440 - uncompress code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <mach/map.h>
-#include <plat/uncompress.h>
-
-static void arch_detect_cpu(void)
-{
-	/* we do not need to do any cpu detection here at the moment. */
-}
-
-#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-s5p6440/init.c b/arch/arm/mach-s5p6440/init.c
deleted file mode 100644
index a1f3727e402..00000000000
--- a/arch/arm/mach-s5p6440/init.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/* linux/arch/arm/mach-s5p6440/init.c
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P6440 - Init support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/s5p6440.h>
-#include <plat/regs-serial.h>
-
-static struct s3c24xx_uart_clksrc s5p6440_serial_clocks[] = {
-	[0] = {
-		.name		= "pclk_low",
-		.divisor	= 1,
-		.min_baud	= 0,
-		.max_baud	= 0,
-	},
-	[1] = {
-		.name		= "uclk1",
-		.divisor	= 1,
-		.min_baud	= 0,
-		.max_baud	= 0,
-	},
-};
-
-/* uart registration process */
-void __init s5p6440_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	struct s3c2410_uartcfg *tcfg = cfg;
-	u32 ucnt;
-
-	for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
-		if (!tcfg->clocks) {
-			tcfg->clocks = s5p6440_serial_clocks;
-			tcfg->clocks_size = ARRAY_SIZE(s5p6440_serial_clocks);
-		}
-	}
-
-	s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
-}
diff --git a/arch/arm/mach-s5p6442/cpu.c b/arch/arm/mach-s5p6442/cpu.c
index 70ac681af72..842af86bda6 100644
--- a/arch/arm/mach-s5p6442/cpu.c
+++ b/arch/arm/mach-s5p6442/cpu.c
@@ -1,7 +1,7 @@
 /* linux/arch/arm/mach-s5p6442/cpu.c
  *
  * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
+ *		http://www.samsung.com
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -48,10 +48,30 @@ static struct map_desc s5p6442_iodesc[] __initdata = {
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
 	}, {
+		.virtual	= (unsigned long)S5P_VA_GPIO,
+		.pfn		= __phys_to_pfn(S5P6442_PA_GPIO),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC0,
+		.pfn		= __phys_to_pfn(S5P6442_PA_VIC0),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC1,
+		.pfn		= __phys_to_pfn(S5P6442_PA_VIC1),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
 		.virtual	= (unsigned long)VA_VIC2,
 		.pfn		= __phys_to_pfn(S5P6442_PA_VIC2),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_UART,
+		.pfn		= __phys_to_pfn(S3C_PA_UART),
+		.length		= SZ_512K,
+		.type		= MT_DEVICE,
 	}
 };
 
@@ -63,10 +83,11 @@ static void s5p6442_idle(void)
 	local_irq_enable();
 }
 
-/* s5p6442_map_io
+/*
+ * s5p6442_map_io
  *
  * register the standard cpu IO areas
-*/
+ */
 
 void __init s5p6442_map_io(void)
 {
diff --git a/arch/arm/mach-s5p6442/include/mach/debug-macro.S b/arch/arm/mach-s5p6442/include/mach/debug-macro.S
index bb6536147ff..e2213205d78 100644
--- a/arch/arm/mach-s5p6442/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5p6442/include/mach/debug-macro.S
@@ -15,13 +15,12 @@
 #include <mach/map.h>
 #include <plat/regs-serial.h>
 
-	.macro addruart, rx, rtmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1
-		ldreq	\rx, = S3C_PA_UART
-		ldrne	\rx, = S3C_VA_UART
+	.macro addruart, rp, rv
+		ldr	\rp, = S3C_PA_UART
+		ldr	\rv, = S3C_VA_UART
 #if CONFIG_DEBUG_S3C_UART != 0
-		add	\rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
+		add	\rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
+		add	\rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
 #endif
 	.endm
 
diff --git a/arch/arm/mach-s5p6442/include/mach/map.h b/arch/arm/mach-s5p6442/include/mach/map.h
index 281d256faaf..31fb2e68d52 100644
--- a/arch/arm/mach-s5p6442/include/mach/map.h
+++ b/arch/arm/mach-s5p6442/include/mach/map.h
@@ -23,16 +23,10 @@
 #define S5P_PA_SYSCON		S5P6442_PA_SYSCON
 
 #define S5P6442_PA_GPIO		(0xE0200000)
-#define S5P_PA_GPIO		S5P6442_PA_GPIO
 
 #define S5P6442_PA_VIC0		(0xE4000000)
-#define S5P_PA_VIC0		S5P6442_PA_VIC0
-
 #define S5P6442_PA_VIC1		(0xE4100000)
-#define S5P_PA_VIC1		S5P6442_PA_VIC1
-
 #define S5P6442_PA_VIC2		(0xE4200000)
-#define S5P_PA_VIC2		S5P6442_PA_VIC2
 
 #define S5P6442_PA_MDMA		0xE8000000
 #define S5P6442_PA_PDMA		0xE9000000
diff --git a/arch/arm/mach-s5p6442/mach-smdk6442.c b/arch/arm/mach-s5p6442/mach-smdk6442.c
index 8d8d04272f8..819fd80d00a 100644
--- a/arch/arm/mach-s5p6442/mach-smdk6442.c
+++ b/arch/arm/mach-s5p6442/mach-smdk6442.c
@@ -83,8 +83,6 @@ static void __init smdk6442_machine_init(void)
 
 MACHINE_START(SMDK6442, "SMDK6442")
 	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
-	.phys_io	= S3C_PA_UART & 0xfff00000,
-	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S5P_PA_SDRAM + 0x100,
 	.init_irq	= s5p6442_init_irq,
 	.map_io		= smdk6442_map_io,
diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig
new file mode 100644
index 00000000000..fbcae935202
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/Kconfig
@@ -0,0 +1,57 @@
+# arch/arm/mach-s5p64x0/Kconfig
+#
+# Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+#		http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+if ARCH_S5P64X0
+
+config CPU_S5P6440
+	bool
+	select PLAT_S5P
+	select S3C_PL330_DMA
+	help
+	  Enable S5P6440 CPU support
+
+config CPU_S5P6450
+	bool
+	select PLAT_S5P
+	select S3C_PL330_DMA
+	help
+	  Enable S5P6450 CPU support
+
+config S5P64X0_SETUP_I2C1
+	bool
+	help
+	  Common setup code for i2c bus 1.
+
+# machine support
+
+config MACH_SMDK6440
+	bool "SMDK6440"
+	select CPU_S5P6440
+	select S3C_DEV_I2C1
+	select S3C_DEV_RTC
+	select S3C_DEV_WDT
+	select S3C64XX_DEV_SPI
+	select SAMSUNG_DEV_ADC
+	select SAMSUNG_DEV_TS
+	select S5P64X0_SETUP_I2C1
+	help
+	  Machine support for the Samsung SMDK6440
+
+config MACH_SMDK6450
+	bool "SMDK6450"
+	select CPU_S5P6450
+	select S3C_DEV_I2C1
+	select S3C_DEV_RTC
+	select S3C_DEV_WDT
+	select S3C64XX_DEV_SPI
+	select SAMSUNG_DEV_ADC
+	select SAMSUNG_DEV_TS
+	select S5P64X0_SETUP_I2C1
+	help
+	  Machine support for the Samsung SMDK6450
+
+endif
diff --git a/arch/arm/mach-s5p64x0/Makefile b/arch/arm/mach-s5p64x0/Makefile
new file mode 100644
index 00000000000..2655829e6bf
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/Makefile
@@ -0,0 +1,30 @@
+# arch/arm/mach-s5p64x0/Makefile
+#
+# Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+# 		http://www.samsung.com
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:=
+obj-				:=
+
+# Core support for S5P64X0 system
+
+obj-$(CONFIG_ARCH_S5P64X0)	+= cpu.o init.o clock.o dma.o
+obj-$(CONFIG_ARCH_S5P64X0)	+= setup-i2c0.o
+obj-$(CONFIG_CPU_S5P6440)	+= clock-s5p6440.o gpio.o
+obj-$(CONFIG_CPU_S5P6450)	+= clock-s5p6450.o
+
+# machine support
+
+obj-$(CONFIG_MACH_SMDK6440)	+= mach-smdk6440.o
+obj-$(CONFIG_MACH_SMDK6450)	+= mach-smdk6450.o
+
+# device support
+
+obj-y				+= dev-audio.o
+obj-$(CONFIG_S3C64XX_DEV_SPI)	+= dev-spi.o
+
+obj-$(CONFIG_S5P64X0_SETUP_I2C1)	+= setup-i2c1.o
diff --git a/arch/arm/mach-s5p6440/Makefile.boot b/arch/arm/mach-s5p64x0/Makefile.boot
index ff90aa13bd6..ff90aa13bd6 100644
--- a/arch/arm/mach-s5p6440/Makefile.boot
+++ b/arch/arm/mach-s5p64x0/Makefile.boot
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6440.c b/arch/arm/mach-s5p64x0/clock-s5p6440.c
new file mode 100644
index 00000000000..f93dcd8b4d6
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/clock-s5p6440.c
@@ -0,0 +1,626 @@
+/* linux/arch/arm/mach-s5p64x0/clock-s5p6440.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P6440 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/s5p64x0-clock.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/s5p6440.h>
+
+static u32 epll_div[][5] = {
+	{ 36000000,	0,	48, 1, 4 },
+	{ 48000000,	0,	32, 1, 3 },
+	{ 60000000,	0,	40, 1, 3 },
+	{ 72000000,	0,	48, 1, 3 },
+	{ 84000000,	0,	28, 1, 2 },
+	{ 96000000,	0,	32, 1, 2 },
+	{ 32768000,	45264,	43, 1, 4 },
+	{ 45158000,	6903,	30, 1, 3 },
+	{ 49152000,	50332,	32, 1, 3 },
+	{ 67738000,	10398,	45, 1, 3 },
+	{ 73728000,	9961,	49, 1, 3 }
+};
+
+static int s5p6440_epll_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned int epll_con, epll_con_k;
+	unsigned int i;
+
+	if (clk->rate == rate)	/* Return if nothing changed */
+		return 0;
+
+	epll_con = __raw_readl(S5P64X0_EPLL_CON);
+	epll_con_k = __raw_readl(S5P64X0_EPLL_CON_K);
+
+	epll_con_k &= ~(PLL90XX_KDIV_MASK);
+	epll_con &= ~(PLL90XX_MDIV_MASK | PLL90XX_PDIV_MASK | PLL90XX_SDIV_MASK);
+
+	for (i = 0; i < ARRAY_SIZE(epll_div); i++) {
+		 if (epll_div[i][0] == rate) {
+			epll_con_k |= (epll_div[i][1] << PLL90XX_KDIV_SHIFT);
+			epll_con |= (epll_div[i][2] << PLL90XX_MDIV_SHIFT) |
+				    (epll_div[i][3] << PLL90XX_PDIV_SHIFT) |
+				    (epll_div[i][4] << PLL90XX_SDIV_SHIFT);
+			break;
+		}
+	}
+
+	if (i == ARRAY_SIZE(epll_div)) {
+		printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__);
+		return -EINVAL;
+	}
+
+	__raw_writel(epll_con, S5P64X0_EPLL_CON);
+	__raw_writel(epll_con_k, S5P64X0_EPLL_CON_K);
+
+	clk->rate = rate;
+
+	return 0;
+}
+
+static struct clk_ops s5p6440_epll_ops = {
+	.get_rate = s5p64x0_epll_get_rate,
+	.set_rate = s5p6440_epll_set_rate,
+};
+
+static struct clksrc_clk clk_hclk = {
+	.clk	= {
+		.name		= "clk_hclk",
+		.id		= -1,
+		.parent		= &clk_armclk.clk,
+	},
+	.reg_div	= { .reg = S5P64X0_CLK_DIV0, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk clk_pclk = {
+	.clk	= {
+		.name		= "clk_pclk",
+		.id		= -1,
+		.parent		= &clk_hclk.clk,
+	},
+	.reg_div	= { .reg = S5P64X0_CLK_DIV0, .shift = 12, .size = 4 },
+};
+static struct clksrc_clk clk_hclk_low = {
+	.clk	= {
+		.name		= "clk_hclk_low",
+		.id		= -1,
+	},
+	.sources	= &clkset_hclk_low,
+	.reg_src	= { .reg = S5P64X0_SYS_OTHERS, .shift = 6, .size = 1 },
+	.reg_div	= { .reg = S5P64X0_CLK_DIV3, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk clk_pclk_low = {
+	.clk	= {
+		.name		= "clk_pclk_low",
+		.id		= -1,
+		.parent		= &clk_hclk_low.clk,
+	},
+	.reg_div	= { .reg = S5P64X0_CLK_DIV3, .shift = 12, .size = 4 },
+};
+
+/*
+ * The following clocks will be disabled during clock initialization. It is
+ * recommended to keep the following clocks disabled until the driver requests
+ * for enabling the clock.
+ */
+static struct clk init_clocks_disable[] = {
+	{
+		.name		= "nand",
+		.id		= -1,
+		.parent		= &clk_hclk.clk,
+		.enable		= s5p64x0_mem_ctrl,
+		.ctrlbit	= (1 << 2),
+	}, {
+		.name		= "post",
+		.id		= -1,
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 5)
+	}, {
+		.name		= "2d",
+		.id		= -1,
+		.parent		= &clk_hclk.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 8),
+	}, {
+		.name		= "hsmmc",
+		.id		= 0,
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 17),
+	}, {
+		.name		= "hsmmc",
+		.id		= 1,
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 18),
+	}, {
+		.name		= "hsmmc",
+		.id		= 2,
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 19),
+	}, {
+		.name		= "otg",
+		.id		= -1,
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 20)
+	}, {
+		.name		= "irom",
+		.id		= -1,
+		.parent		= &clk_hclk.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 25),
+	}, {
+		.name		= "lcd",
+		.id		= -1,
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk1_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "hclk_fimgvg",
+		.id		= -1,
+		.parent		= &clk_hclk.clk,
+		.enable		= s5p64x0_hclk1_ctrl,
+		.ctrlbit	= (1 << 2),
+	}, {
+		.name		= "tsi",
+		.id		= -1,
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk1_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "watchdog",
+		.id		= -1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 5),
+	}, {
+		.name		= "rtc",
+		.id		= -1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 6),
+	}, {
+		.name		= "timers",
+		.id		= -1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 7),
+	}, {
+		.name		= "pcm",
+		.id		= -1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 8),
+	}, {
+		.name		= "adc",
+		.id		= -1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 12),
+	}, {
+		.name		= "i2c",
+		.id		= -1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 17),
+	}, {
+		.name		= "spi",
+		.id		= 0,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 21),
+	}, {
+		.name		= "spi",
+		.id		= 1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 22),
+	}, {
+		.name		= "gps",
+		.id		= -1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 25),
+	}, {
+		.name		= "i2s_v40",
+		.id		= 0,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 26),
+	}, {
+		.name		= "dsim",
+		.id		= -1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 28),
+	}, {
+		.name		= "etm",
+		.id		= -1,
+		.parent		= &clk_pclk.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 29),
+	}, {
+		.name		= "dmc0",
+		.id		= -1,
+		.parent		= &clk_pclk.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 30),
+	}, {
+		.name		= "pclk_fimgvg",
+		.id		= -1,
+		.parent		= &clk_pclk.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 31),
+	}, {
+		.name		= "sclk_spi_48",
+		.id		= 0,
+		.parent		= &clk_48m,
+		.enable		= s5p64x0_sclk_ctrl,
+		.ctrlbit	= (1 << 22),
+	}, {
+		.name		= "sclk_spi_48",
+		.id		= 1,
+		.parent		= &clk_48m,
+		.enable		= s5p64x0_sclk_ctrl,
+		.ctrlbit	= (1 << 23),
+	}, {
+		.name		= "mmc_48m",
+		.id		= 0,
+		.parent		= &clk_48m,
+		.enable		= s5p64x0_sclk_ctrl,
+		.ctrlbit	= (1 << 27),
+	}, {
+		.name		= "mmc_48m",
+		.id		= 1,
+		.parent		= &clk_48m,
+		.enable		= s5p64x0_sclk_ctrl,
+		.ctrlbit	= (1 << 28),
+	}, {
+		.name		= "mmc_48m",
+		.id		= 2,
+		.parent		= &clk_48m,
+		.enable		= s5p64x0_sclk_ctrl,
+		.ctrlbit	= (1 << 29),
+	},
+};
+
+/*
+ * The following clocks will be enabled during clock initialization.
+ */
+static struct clk init_clocks[] = {
+	{
+		.name		= "intc",
+		.id		= -1,
+		.parent		= &clk_hclk.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "mem",
+		.id		= -1,
+		.parent		= &clk_hclk.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 21),
+	}, {
+		.name		= "dma",
+		.id		= -1,
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 12),
+	}, {
+		.name		= "uart",
+		.id		= 0,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "uart",
+		.id		= 1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 2),
+	}, {
+		.name		= "uart",
+		.id		= 2,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 3),
+	}, {
+		.name		= "uart",
+		.id		= 3,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 4),
+	}, {
+		.name		= "gpio",
+		.id		= -1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 18),
+	},
+};
+
+static struct clk clk_iis_cd_v40 = {
+	.name		= "iis_cdclk_v40",
+	.id		= -1,
+};
+
+static struct clk clk_pcm_cd = {
+	.name		= "pcm_cdclk",
+	.id		= -1,
+};
+
+static struct clk *clkset_group1_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll.clk,
+	&clk_fin_epll,
+};
+
+static struct clksrc_sources clkset_group1 = {
+	.sources	= clkset_group1_list,
+	.nr_sources	= ARRAY_SIZE(clkset_group1_list),
+};
+
+static struct clk *clkset_uart_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll.clk,
+};
+
+static struct clksrc_sources clkset_uart = {
+	.sources	= clkset_uart_list,
+	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
+};
+
+static struct clk *clkset_audio_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll.clk,
+	&clk_fin_epll,
+	&clk_iis_cd_v40,
+	&clk_pcm_cd,
+};
+
+static struct clksrc_sources clkset_audio = {
+	.sources	= clkset_audio_list,
+	.nr_sources	= ARRAY_SIZE(clkset_audio_list),
+};
+
+static struct clksrc_clk clksrcs[] = {
+	{
+		.clk	= {
+			.name		= "mmc_bus",
+			.id		= 0,
+			.ctrlbit	= (1 << 24),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_group1,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 18, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 0, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "mmc_bus",
+			.id		= 1,
+			.ctrlbit	= (1 << 25),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_group1,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 20, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 4, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "mmc_bus",
+			.id		= 2,
+			.ctrlbit	= (1 << 26),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_group1,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 22, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 8, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "uclk1",
+			.id		= -1,
+			.ctrlbit	= (1 << 5),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_uart,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 13, .size = 1 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_spi",
+			.id		= 0,
+			.ctrlbit	= (1 << 20),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_group1,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 14, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 0, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_spi",
+			.id		= 1,
+			.ctrlbit	= (1 << 21),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_group1,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 16, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 4, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_post",
+			.id		= -1,
+			.ctrlbit	= (1 << 10),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_group1,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 26, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 12, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_dispcon",
+			.id		= -1,
+			.ctrlbit	= (1 << 1),
+			.enable		= s5p64x0_sclk1_ctrl,
+		},
+		.sources = &clkset_group1,
+		.reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 4, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 0, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_fimgvg",
+			.id		= -1,
+			.ctrlbit	= (1 << 2),
+			.enable		= s5p64x0_sclk1_ctrl,
+		},
+		.sources = &clkset_group1,
+		.reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 8, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 4, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_audio2",
+			.id		= -1,
+			.ctrlbit	= (1 << 11),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_audio,
+		.reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 0, .size = 3 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 24, .size = 4 },
+	},
+};
+
+/* Clock initialization code */
+static struct clksrc_clk *sysclks[] = {
+	&clk_mout_apll,
+	&clk_mout_epll,
+	&clk_mout_mpll,
+	&clk_dout_mpll,
+	&clk_armclk,
+	&clk_hclk,
+	&clk_pclk,
+	&clk_hclk_low,
+	&clk_pclk_low,
+};
+
+void __init_or_cpufreq s5p6440_setup_clocks(void)
+{
+	struct clk *xtal_clk;
+
+	unsigned long xtal;
+	unsigned long fclk;
+	unsigned long hclk;
+	unsigned long hclk_low;
+	unsigned long pclk;
+	unsigned long pclk_low;
+
+	unsigned long apll;
+	unsigned long mpll;
+	unsigned long epll;
+	unsigned int ptr;
+
+	/* Set S5P6440 functions for clk_fout_epll */
+
+	clk_fout_epll.enable = s5p64x0_epll_enable;
+	clk_fout_epll.ops = &s5p6440_epll_ops;
+
+	clk_48m.enable = s5p64x0_clk48m_ctrl;
+
+	xtal_clk = clk_get(NULL, "ext_xtal");
+	BUG_ON(IS_ERR(xtal_clk));
+
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
+
+	apll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_APLL_CON), pll_4502);
+	mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_MPLL_CON), pll_4502);
+	epll = s5p_get_pll90xx(xtal, __raw_readl(S5P64X0_EPLL_CON),
+				__raw_readl(S5P64X0_EPLL_CON_K));
+
+	clk_fout_apll.rate = apll;
+	clk_fout_mpll.rate = mpll;
+	clk_fout_epll.rate = epll;
+
+	printk(KERN_INFO "S5P6440: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz," \
+			" E=%ld.%ldMHz\n",
+			print_mhz(apll), print_mhz(mpll), print_mhz(epll));
+
+	fclk = clk_get_rate(&clk_armclk.clk);
+	hclk = clk_get_rate(&clk_hclk.clk);
+	pclk = clk_get_rate(&clk_pclk.clk);
+	hclk_low = clk_get_rate(&clk_hclk_low.clk);
+	pclk_low = clk_get_rate(&clk_pclk_low.clk);
+
+	printk(KERN_INFO "S5P6440: HCLK=%ld.%ldMHz, HCLK_LOW=%ld.%ldMHz," \
+			" PCLK=%ld.%ldMHz, PCLK_LOW=%ld.%ldMHz\n",
+			print_mhz(hclk), print_mhz(hclk_low),
+			print_mhz(pclk), print_mhz(pclk_low));
+
+	clk_f.rate = fclk;
+	clk_h.rate = hclk;
+	clk_p.rate = pclk;
+
+	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+		s3c_set_clksrc(&clksrcs[ptr], true);
+}
+
+static struct clk *clks[] __initdata = {
+	&clk_ext,
+	&clk_iis_cd_v40,
+	&clk_pcm_cd,
+};
+
+void __init s5p6440_register_clocks(void)
+{
+	struct clk *clkp;
+	int ret;
+	int ptr;
+
+	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
+
+	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
+		s3c_register_clksrc(sysclks[ptr], 1);
+
+	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+
+	clkp = init_clocks_disable;
+	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+		(clkp->enable)(clkp, 0);
+	}
+
+	s3c_pwmclk_init();
+}
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6450.c b/arch/arm/mach-s5p64x0/clock-s5p6450.c
new file mode 100644
index 00000000000..f9afb05b217
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/clock-s5p6450.c
@@ -0,0 +1,655 @@
+/* linux/arch/arm/mach-s5p64x0/clock-s5p6450.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P6450 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/s5p64x0-clock.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/s5p6450.h>
+
+static struct clksrc_clk clk_mout_dpll = {
+	.clk	= {
+		.name		= "mout_dpll",
+		.id		= -1,
+	},
+	.sources	= &clk_src_dpll,
+	.reg_src	= { .reg = S5P64X0_CLK_SRC0, .shift = 5, .size = 1 },
+};
+
+static u32 epll_div[][5] = {
+	{ 133000000,	27307,	55, 2, 2 },
+	{ 100000000,	43691,	41, 2, 2 },
+	{ 480000000,	0,	80, 2, 0 },
+};
+
+static int s5p6450_epll_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned int epll_con, epll_con_k;
+	unsigned int i;
+
+	if (clk->rate == rate)	/* Return if nothing changed */
+		return 0;
+
+	epll_con = __raw_readl(S5P64X0_EPLL_CON);
+	epll_con_k = __raw_readl(S5P64X0_EPLL_CON_K);
+
+	epll_con_k &= ~(PLL90XX_KDIV_MASK);
+	epll_con &= ~(PLL90XX_MDIV_MASK | PLL90XX_PDIV_MASK | PLL90XX_SDIV_MASK);
+
+	for (i = 0; i < ARRAY_SIZE(epll_div); i++) {
+		 if (epll_div[i][0] == rate) {
+			epll_con_k |= (epll_div[i][1] << PLL90XX_KDIV_SHIFT);
+			epll_con |= (epll_div[i][2] << PLL90XX_MDIV_SHIFT) |
+				    (epll_div[i][3] << PLL90XX_PDIV_SHIFT) |
+				    (epll_div[i][4] << PLL90XX_SDIV_SHIFT);
+			break;
+		}
+	}
+
+	if (i == ARRAY_SIZE(epll_div)) {
+		printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__);
+		return -EINVAL;
+	}
+
+	__raw_writel(epll_con, S5P64X0_EPLL_CON);
+	__raw_writel(epll_con_k, S5P64X0_EPLL_CON_K);
+
+	clk->rate = rate;
+
+	return 0;
+}
+
+static struct clk_ops s5p6450_epll_ops = {
+	.get_rate = s5p64x0_epll_get_rate,
+	.set_rate = s5p6450_epll_set_rate,
+};
+
+static struct clksrc_clk clk_dout_epll = {
+	.clk	= {
+		.name		= "dout_epll",
+		.id		= -1,
+		.parent		= &clk_mout_epll.clk,
+	},
+	.reg_div	= { .reg = S5P64X0_CLK_DIV1, .shift = 24, .size = 4 },
+};
+
+static struct clksrc_clk clk_mout_hclk_sel = {
+	.clk	= {
+		.name		= "mout_hclk_sel",
+		.id		= -1,
+	},
+	.sources	= &clkset_hclk_low,
+	.reg_src	= { .reg = S5P64X0_OTHERS, .shift = 15, .size = 1 },
+};
+
+static struct clk *clkset_hclk_list[] = {
+	&clk_mout_hclk_sel.clk,
+	&clk_armclk.clk,
+};
+
+static struct clksrc_sources clkset_hclk = {
+	.sources	= clkset_hclk_list,
+	.nr_sources	= ARRAY_SIZE(clkset_hclk_list),
+};
+
+static struct clksrc_clk clk_hclk = {
+	.clk	= {
+		.name		= "clk_hclk",
+		.id		= -1,
+	},
+	.sources	= &clkset_hclk,
+	.reg_src	= { .reg = S5P64X0_OTHERS, .shift = 14, .size = 1 },
+	.reg_div	= { .reg = S5P64X0_CLK_DIV0, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk clk_pclk = {
+	.clk	= {
+		.name		= "clk_pclk",
+		.id		= -1,
+		.parent		= &clk_hclk.clk,
+	},
+	.reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 12, .size = 4 },
+};
+static struct clksrc_clk clk_dout_pwm_ratio0 = {
+	.clk	= {
+		.name		= "clk_dout_pwm_ratio0",
+		.id		= -1,
+		.parent		= &clk_mout_hclk_sel.clk,
+	},
+	.reg_div	= { .reg = S5P64X0_CLK_DIV3, .shift = 16, .size = 4 },
+};
+
+static struct clksrc_clk clk_pclk_to_wdt_pwm = {
+	.clk	= {
+		.name		= "clk_pclk_to_wdt_pwm",
+		.id		= -1,
+		.parent		= &clk_dout_pwm_ratio0.clk,
+	},
+	.reg_div	= { .reg = S5P64X0_CLK_DIV3, .shift = 20, .size = 4 },
+};
+
+static struct clksrc_clk clk_hclk_low = {
+	.clk	= {
+		.name		= "clk_hclk_low",
+		.id		= -1,
+	},
+	.sources	= &clkset_hclk_low,
+	.reg_src	= { .reg = S5P64X0_OTHERS, .shift = 6, .size = 1 },
+	.reg_div	= { .reg = S5P64X0_CLK_DIV3, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk clk_pclk_low = {
+	.clk	= {
+		.name		= "clk_pclk_low",
+		.id		= -1,
+		.parent		= &clk_hclk_low.clk,
+	},
+	.reg_div	= { .reg = S5P64X0_CLK_DIV3, .shift = 12, .size = 4 },
+};
+
+/*
+ * The following clocks will be disabled during clock initialization. It is
+ * recommended to keep the following clocks disabled until the driver requests
+ * for enabling the clock.
+ */
+static struct clk init_clocks_disable[] = {
+	{
+		.name		= "usbhost",
+		.id		= -1,
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 3),
+	}, {
+		.name		= "hsmmc",
+		.id		= 0,
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 17),
+	}, {
+		.name		= "hsmmc",
+		.id		= 1,
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 18),
+	}, {
+		.name		= "hsmmc",
+		.id		= 2,
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 19),
+	}, {
+		.name		= "usbotg",
+		.id		= -1,
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 20),
+	}, {
+		.name		= "lcd",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5p64x0_hclk1_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "watchdog",
+		.id		= -1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 5),
+	}, {
+		.name		= "adc",
+		.id		= -1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 12),
+	}, {
+		.name		= "i2c",
+		.id		= 0,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 17),
+	}, {
+		.name		= "spi",
+		.id		= 0,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 21),
+	}, {
+		.name		= "spi",
+		.id		= 1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 22),
+	}, {
+		.name		= "iis",
+		.id		= -1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 26),
+	}, {
+		.name		= "i2c",
+		.id		= 1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 27),
+	}, {
+		.name		= "dmc0",
+		.id		= -1,
+		.parent		= &clk_pclk.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 30),
+	}
+};
+
+/*
+ * The following clocks will be enabled during clock initialization.
+ */
+static struct clk init_clocks[] = {
+	{
+		.name		= "intc",
+		.id		= -1,
+		.parent		= &clk_hclk.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "mem",
+		.id		= -1,
+		.parent		= &clk_hclk.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 21),
+	}, {
+		.name		= "dma",
+		.id		= -1,
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 12),
+	}, {
+		.name		= "uart",
+		.id		= 0,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "uart",
+		.id		= 1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 2),
+	}, {
+		.name		= "uart",
+		.id		= 2,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 3),
+	}, {
+		.name		= "uart",
+		.id		= 3,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 4),
+	}, {
+		.name		= "timers",
+		.id		= -1,
+		.parent		= &clk_pclk_to_wdt_pwm.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 7),
+	}, {
+		.name		= "gpio",
+		.id		= -1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 18),
+	},
+};
+
+static struct clk *clkset_uart_list[] = {
+	&clk_dout_epll.clk,
+	&clk_dout_mpll.clk,
+};
+
+static struct clksrc_sources clkset_uart = {
+	.sources	= clkset_uart_list,
+	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
+};
+
+static struct clk *clkset_mali_list[] = {
+	&clk_mout_epll.clk,
+	&clk_mout_apll.clk,
+	&clk_mout_mpll.clk,
+};
+
+static struct clksrc_sources clkset_mali = {
+	.sources	= clkset_mali_list,
+	.nr_sources	= ARRAY_SIZE(clkset_mali_list),
+};
+
+static struct clk *clkset_group2_list[] = {
+	&clk_dout_epll.clk,
+	&clk_dout_mpll.clk,
+	&clk_ext_xtal_mux,
+};
+
+static struct clksrc_sources clkset_group2 = {
+	.sources	= clkset_group2_list,
+	.nr_sources	= ARRAY_SIZE(clkset_group2_list),
+};
+
+static struct clk *clkset_dispcon_list[] = {
+	&clk_dout_epll.clk,
+	&clk_dout_mpll.clk,
+	&clk_ext_xtal_mux,
+	&clk_mout_dpll.clk,
+};
+
+static struct clksrc_sources clkset_dispcon = {
+	.sources	= clkset_dispcon_list,
+	.nr_sources	= ARRAY_SIZE(clkset_dispcon_list),
+};
+
+static struct clk *clkset_hsmmc44_list[] = {
+	&clk_dout_epll.clk,
+	&clk_dout_mpll.clk,
+	&clk_ext_xtal_mux,
+	&s5p_clk_27m,
+	&clk_48m,
+};
+
+static struct clksrc_sources clkset_hsmmc44 = {
+	.sources	= clkset_hsmmc44_list,
+	.nr_sources	= ARRAY_SIZE(clkset_hsmmc44_list),
+};
+
+static struct clk *clkset_sclk_audio0_list[] = {
+	[0] = &clk_dout_epll.clk,
+	[1] = &clk_dout_mpll.clk,
+	[2] = &clk_ext_xtal_mux,
+	[3] = NULL,
+	[4] = NULL,
+};
+
+static struct clksrc_sources clkset_sclk_audio0 = {
+	.sources	= clkset_sclk_audio0_list,
+	.nr_sources	= ARRAY_SIZE(clkset_sclk_audio0_list),
+};
+
+static struct clksrc_clk clk_sclk_audio0 = {
+	.clk		= {
+		.name		= "audio-bus",
+		.id		= -1,
+		.enable		= s5p64x0_sclk_ctrl,
+		.ctrlbit	= (1 << 8),
+		.parent		= &clk_dout_epll.clk,
+	},
+	.sources	= &clkset_sclk_audio0,
+	.reg_src	= { .reg = S5P64X0_CLK_SRC1, .shift = 10, .size = 3 },
+	.reg_div	= { .reg = S5P64X0_CLK_DIV2, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk clksrcs[] = {
+	{
+		.clk	= {
+			.name		= "sclk_mmc",
+			.id		= 0,
+			.ctrlbit	= (1 << 24),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 18, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 0, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_mmc",
+			.id		= 1,
+			.ctrlbit	= (1 << 25),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 20, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 4, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_mmc",
+			.id		= 2,
+			.ctrlbit	= (1 << 26),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 22, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 8, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "uclk1",
+			.id		= -1,
+			.ctrlbit	= (1 << 5),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_uart,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 13, .size = 1 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_spi",
+			.id		= 0,
+			.ctrlbit	= (1 << 20),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 14, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 0, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_spi",
+			.id		= 1,
+			.ctrlbit	= (1 << 21),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 16, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 4, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_fimc",
+			.id		= -1,
+			.ctrlbit	= (1 << 10),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 26, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 12, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "aclk_mali",
+			.id		= -1,
+			.ctrlbit	= (1 << 2),
+			.enable		= s5p64x0_sclk1_ctrl,
+		},
+		.sources = &clkset_mali,
+		.reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 8, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 4, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_2d",
+			.id		= -1,
+			.ctrlbit	= (1 << 12),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_mali,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 30, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 20, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_usi",
+			.id		= -1,
+			.ctrlbit	= (1 << 7),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 10, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 16, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_camif",
+			.id		= -1,
+			.ctrlbit	= (1 << 6),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 28, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 20, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_dispcon",
+			.id		= -1,
+			.ctrlbit	= (1 << 1),
+			.enable		= s5p64x0_sclk1_ctrl,
+		},
+		.sources = &clkset_dispcon,
+		.reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 4, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 0, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_hsmmc44",
+			.id		= -1,
+			.ctrlbit	= (1 << 30),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_hsmmc44,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 6, .size = 3 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 28, .size = 4 },
+	},
+};
+
+/* Clock initialization code */
+static struct clksrc_clk *sysclks[] = {
+	&clk_mout_apll,
+	&clk_mout_epll,
+	&clk_dout_epll,
+	&clk_mout_mpll,
+	&clk_dout_mpll,
+	&clk_armclk,
+	&clk_mout_hclk_sel,
+	&clk_dout_pwm_ratio0,
+	&clk_pclk_to_wdt_pwm,
+	&clk_hclk,
+	&clk_pclk,
+	&clk_hclk_low,
+	&clk_pclk_low,
+	&clk_sclk_audio0,
+};
+
+void __init_or_cpufreq s5p6450_setup_clocks(void)
+{
+	struct clk *xtal_clk;
+
+	unsigned long xtal;
+	unsigned long fclk;
+	unsigned long hclk;
+	unsigned long hclk_low;
+	unsigned long pclk;
+	unsigned long pclk_low;
+
+	unsigned long apll;
+	unsigned long mpll;
+	unsigned long epll;
+	unsigned long dpll;
+	unsigned int ptr;
+
+	/* Set S5P6450 functions for clk_fout_epll */
+
+	clk_fout_epll.enable = s5p64x0_epll_enable;
+	clk_fout_epll.ops = &s5p6450_epll_ops;
+
+	clk_48m.enable = s5p64x0_clk48m_ctrl;
+
+	xtal_clk = clk_get(NULL, "ext_xtal");
+	BUG_ON(IS_ERR(xtal_clk));
+
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
+
+	apll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_APLL_CON), pll_4502);
+	mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_MPLL_CON), pll_4502);
+	epll = s5p_get_pll90xx(xtal, __raw_readl(S5P64X0_EPLL_CON),
+				__raw_readl(S5P64X0_EPLL_CON_K));
+	dpll = s5p_get_pll46xx(xtal, __raw_readl(S5P6450_DPLL_CON),
+				__raw_readl(S5P6450_DPLL_CON_K), pll_4650c);
+
+	clk_fout_apll.rate = apll;
+	clk_fout_mpll.rate = mpll;
+	clk_fout_epll.rate = epll;
+	clk_fout_dpll.rate = dpll;
+
+	printk(KERN_INFO "S5P6450: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz," \
+			" E=%ld.%ldMHz, D=%ld.%ldMHz\n",
+			print_mhz(apll), print_mhz(mpll), print_mhz(epll),
+			print_mhz(dpll));
+
+	fclk = clk_get_rate(&clk_armclk.clk);
+	hclk = clk_get_rate(&clk_hclk.clk);
+	pclk = clk_get_rate(&clk_pclk.clk);
+	hclk_low = clk_get_rate(&clk_hclk_low.clk);
+	pclk_low = clk_get_rate(&clk_pclk_low.clk);
+
+	printk(KERN_INFO "S5P6450: HCLK=%ld.%ldMHz, HCLK_LOW=%ld.%ldMHz," \
+			" PCLK=%ld.%ldMHz, PCLK_LOW=%ld.%ldMHz\n",
+			print_mhz(hclk), print_mhz(hclk_low),
+			print_mhz(pclk), print_mhz(pclk_low));
+
+	clk_f.rate = fclk;
+	clk_h.rate = hclk;
+	clk_p.rate = pclk;
+
+	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+		s3c_set_clksrc(&clksrcs[ptr], true);
+}
+
+void __init s5p6450_register_clocks(void)
+{
+	struct clk *clkp;
+	int ret;
+	int ptr;
+
+	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
+		s3c_register_clksrc(sysclks[ptr], 1);
+
+	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+
+	clkp = init_clocks_disable;
+	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+		(clkp->enable)(clkp, 0);
+	}
+
+	s3c_pwmclk_init();
+}
diff --git a/arch/arm/mach-s5p64x0/clock.c b/arch/arm/mach-s5p64x0/clock.c
new file mode 100644
index 00000000000..523ba8039ac
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/clock.c
@@ -0,0 +1,253 @@
+/* linux/arch/arm/mach-s5p64x0/clock.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P64X0 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/s5p6440.h>
+#include <plat/s5p6450.h>
+
+struct clksrc_clk clk_mout_apll = {
+	.clk	= {
+		.name		= "mout_apll",
+		.id		= -1,
+	},
+	.sources	= &clk_src_apll,
+	.reg_src	= { .reg = S5P64X0_CLK_SRC0, .shift = 0, .size = 1 },
+};
+
+struct clksrc_clk clk_mout_mpll = {
+	.clk	= {
+		.name		= "mout_mpll",
+		.id		= -1,
+	},
+	.sources	= &clk_src_mpll,
+	.reg_src	= { .reg = S5P64X0_CLK_SRC0, .shift = 1, .size = 1 },
+};
+
+struct clksrc_clk clk_mout_epll = {
+	.clk	= {
+		.name		= "mout_epll",
+		.id		= -1,
+	},
+	.sources	= &clk_src_epll,
+	.reg_src	= { .reg = S5P64X0_CLK_SRC0, .shift = 2, .size = 1 },
+};
+
+enum perf_level {
+	L0 = 532*1000,
+	L1 = 266*1000,
+	L2 = 133*1000,
+};
+
+static const u32 clock_table[][3] = {
+	/*{ARM_CLK, DIVarm, DIVhclk}*/
+	{L0 * 1000, (0 << ARM_DIV_RATIO_SHIFT), (3 << S5P64X0_CLKDIV0_HCLK_SHIFT)},
+	{L1 * 1000, (1 << ARM_DIV_RATIO_SHIFT), (1 << S5P64X0_CLKDIV0_HCLK_SHIFT)},
+	{L2 * 1000, (3 << ARM_DIV_RATIO_SHIFT), (0 << S5P64X0_CLKDIV0_HCLK_SHIFT)},
+};
+
+int s5p64x0_epll_enable(struct clk *clk, int enable)
+{
+	unsigned int ctrlbit = clk->ctrlbit;
+	unsigned int epll_con = __raw_readl(S5P64X0_EPLL_CON) & ~ctrlbit;
+
+	if (enable)
+		__raw_writel(epll_con | ctrlbit, S5P64X0_EPLL_CON);
+	else
+		__raw_writel(epll_con, S5P64X0_EPLL_CON);
+
+	return 0;
+}
+
+unsigned long s5p64x0_epll_get_rate(struct clk *clk)
+{
+	return clk->rate;
+}
+
+unsigned long s5p64x0_armclk_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	u32 clkdiv;
+
+	/* divisor mask starts at bit0, so no need to shift */
+	clkdiv = __raw_readl(ARM_CLK_DIV) & ARM_DIV_MASK;
+
+	return rate / (clkdiv + 1);
+}
+
+unsigned long s5p64x0_armclk_round_rate(struct clk *clk, unsigned long rate)
+{
+	u32 iter;
+
+	for (iter = 1 ; iter < ARRAY_SIZE(clock_table) ; iter++) {
+		if (rate > clock_table[iter][0])
+			return clock_table[iter-1][0];
+	}
+
+	return clock_table[ARRAY_SIZE(clock_table) - 1][0];
+}
+
+int s5p64x0_armclk_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 round_tmp;
+	u32 iter;
+	u32 clk_div0_tmp;
+	u32 cur_rate = clk->ops->get_rate(clk);
+	unsigned long flags;
+
+	round_tmp = clk->ops->round_rate(clk, rate);
+	if (round_tmp == cur_rate)
+		return 0;
+
+
+	for (iter = 0 ; iter < ARRAY_SIZE(clock_table) ; iter++) {
+		if (round_tmp == clock_table[iter][0])
+			break;
+	}
+
+	if (iter >= ARRAY_SIZE(clock_table))
+		iter = ARRAY_SIZE(clock_table) - 1;
+
+	local_irq_save(flags);
+	if (cur_rate > round_tmp) {
+		/* Frequency Down */
+		clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK);
+		clk_div0_tmp |= clock_table[iter][1];
+		__raw_writel(clk_div0_tmp, ARM_CLK_DIV);
+
+		clk_div0_tmp = __raw_readl(ARM_CLK_DIV) &
+				~(S5P64X0_CLKDIV0_HCLK_MASK);
+		clk_div0_tmp |= clock_table[iter][2];
+		__raw_writel(clk_div0_tmp, ARM_CLK_DIV);
+
+
+	} else {
+		/* Frequency Up */
+		clk_div0_tmp = __raw_readl(ARM_CLK_DIV) &
+				~(S5P64X0_CLKDIV0_HCLK_MASK);
+		clk_div0_tmp |= clock_table[iter][2];
+		__raw_writel(clk_div0_tmp, ARM_CLK_DIV);
+
+		clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK);
+		clk_div0_tmp |= clock_table[iter][1];
+		__raw_writel(clk_div0_tmp, ARM_CLK_DIV);
+	}
+	local_irq_restore(flags);
+
+	clk->rate = clock_table[iter][0];
+
+	return 0;
+}
+
+struct clk_ops s5p64x0_clkarm_ops = {
+	.get_rate	= s5p64x0_armclk_get_rate,
+	.set_rate	= s5p64x0_armclk_set_rate,
+	.round_rate	= s5p64x0_armclk_round_rate,
+};
+
+struct clksrc_clk clk_armclk = {
+	.clk	= {
+		.name		= "armclk",
+		.id		= 1,
+		.parent		= &clk_mout_apll.clk,
+		.ops		= &s5p64x0_clkarm_ops,
+	},
+	.reg_div	= { .reg = S5P64X0_CLK_DIV0, .shift = 0, .size = 4 },
+};
+
+struct clksrc_clk clk_dout_mpll = {
+	.clk	= {
+		.name		= "dout_mpll",
+		.id		= -1,
+		.parent		= &clk_mout_mpll.clk,
+	},
+	.reg_div	= { .reg = S5P64X0_CLK_DIV0, .shift = 4, .size = 1 },
+};
+
+struct clk *clkset_hclk_low_list[] = {
+	&clk_mout_apll.clk,
+	&clk_mout_mpll.clk,
+};
+
+struct clksrc_sources clkset_hclk_low = {
+	.sources	= clkset_hclk_low_list,
+	.nr_sources	= ARRAY_SIZE(clkset_hclk_low_list),
+};
+
+int s5p64x0_pclk_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P64X0_CLK_GATE_PCLK, clk, enable);
+}
+
+int s5p64x0_hclk0_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P64X0_CLK_GATE_HCLK0, clk, enable);
+}
+
+int s5p64x0_hclk1_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P64X0_CLK_GATE_HCLK1, clk, enable);
+}
+
+int s5p64x0_sclk_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P64X0_CLK_GATE_SCLK0, clk, enable);
+}
+
+int s5p64x0_sclk1_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P64X0_CLK_GATE_SCLK1, clk, enable);
+}
+
+int s5p64x0_mem_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P64X0_CLK_GATE_MEM0, clk, enable);
+}
+
+int s5p64x0_clk48m_ctrl(struct clk *clk, int enable)
+{
+	unsigned long flags;
+	u32 val;
+
+	/* can't rely on clock lock, this register has other usages */
+	local_irq_save(flags);
+
+	val = __raw_readl(S5P64X0_OTHERS);
+	if (enable)
+		val |= S5P64X0_OTHERS_USB_SIG_MASK;
+	else
+		val &= ~S5P64X0_OTHERS_USB_SIG_MASK;
+
+	__raw_writel(val, S5P64X0_OTHERS);
+
+	local_irq_restore(flags);
+
+	return 0;
+}
diff --git a/arch/arm/mach-s5p64x0/cpu.c b/arch/arm/mach-s5p64x0/cpu.c
new file mode 100644
index 00000000000..b8d02eb4cf3
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/cpu.c
@@ -0,0 +1,209 @@
+/* linux/arch/arm/mach-s5p64x0/cpu.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/proc-fns.h>
+#include <asm/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+#include <plat/regs-serial.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+#include <plat/s5p6440.h>
+#include <plat/s5p6450.h>
+#include <plat/adc-core.h>
+
+/* Initial IO mappings */
+
+static struct map_desc s5p64x0_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S5P_VA_GPIO,
+		.pfn		= __phys_to_pfn(S5P64X0_PA_GPIO),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC0,
+		.pfn		= __phys_to_pfn(S5P64X0_PA_VIC0),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC1,
+		.pfn		= __phys_to_pfn(S5P64X0_PA_VIC1),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static struct map_desc s5p6440_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S3C_VA_UART,
+		.pfn		= __phys_to_pfn(S5P6440_PA_UART(0)),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static struct map_desc s5p6450_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S3C_VA_UART,
+		.pfn		= __phys_to_pfn(S5P6450_PA_UART(0)),
+		.length		= SZ_512K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_UART + SZ_512K,
+		.pfn		= __phys_to_pfn(S5P6450_PA_UART(5)),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static void s5p64x0_idle(void)
+{
+	unsigned long val;
+
+	if (!need_resched()) {
+		val = __raw_readl(S5P64X0_PWR_CFG);
+		val &= ~(0x3 << 5);
+		val |= (0x1 << 5);
+		__raw_writel(val, S5P64X0_PWR_CFG);
+
+		cpu_do_idle();
+	}
+	local_irq_enable();
+}
+
+/*
+ * s5p64x0_map_io
+ *
+ * register the standard CPU IO areas
+ */
+
+void __init s5p6440_map_io(void)
+{
+	/* initialize any device information early */
+	s3c_adc_setname("s3c64xx-adc");
+
+	iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc));
+	iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc));
+}
+
+void __init s5p6450_map_io(void)
+{
+	/* initialize any device information early */
+	s3c_adc_setname("s3c64xx-adc");
+
+	iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc));
+	iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6440_iodesc));
+}
+
+/*
+ * s5p64x0_init_clocks
+ *
+ * register and setup the CPU clocks
+ */
+
+void __init s5p6440_init_clocks(int xtal)
+{
+	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
+
+	s3c24xx_register_baseclocks(xtal);
+	s5p_register_clocks(xtal);
+	s5p6440_register_clocks();
+	s5p6440_setup_clocks();
+}
+
+void __init s5p6450_init_clocks(int xtal)
+{
+	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
+
+	s3c24xx_register_baseclocks(xtal);
+	s5p_register_clocks(xtal);
+	s5p6450_register_clocks();
+	s5p6450_setup_clocks();
+}
+
+/*
+ * s5p64x0_init_irq
+ *
+ * register the CPU interrupts
+ */
+
+void __init s5p6440_init_irq(void)
+{
+	/* S5P6440 supports 2 VIC */
+	u32 vic[2];
+
+	/*
+	 * VIC0 is missing IRQ_VIC0[3, 4, 8, 10, (12-22)]
+	 * VIC1 is missing IRQ VIC1[1, 3, 4, 10, 11, 12, 14, 15, 22]
+	 */
+	vic[0] = 0xff800ae7;
+	vic[1] = 0xffbf23e5;
+
+	s5p_init_irq(vic, ARRAY_SIZE(vic));
+}
+
+void __init s5p6450_init_irq(void)
+{
+	/* S5P6450 supports only 2 VIC */
+	u32 vic[2];
+
+	/*
+	 * VIC0 is missing IRQ_VIC0[(13-15), (21-22)]
+	 * VIC1 is missing IRQ VIC1[12, 14, 23]
+	 */
+	vic[0] = 0xff9f1fff;
+	vic[1] = 0xff7fafff;
+
+	s5p_init_irq(vic, ARRAY_SIZE(vic));
+}
+
+struct sysdev_class s5p64x0_sysclass = {
+	.name	= "s5p64x0-core",
+};
+
+static struct sys_device s5p64x0_sysdev = {
+	.cls	= &s5p64x0_sysclass,
+};
+
+static int __init s5p64x0_core_init(void)
+{
+	return sysdev_class_register(&s5p64x0_sysclass);
+}
+core_initcall(s5p64x0_core_init);
+
+int __init s5p64x0_init(void)
+{
+	printk(KERN_INFO "S5P64X0(S5P6440/S5P6450): Initializing architecture\n");
+
+	/* set idle function */
+	pm_idle = s5p64x0_idle;
+
+	return sysdev_register(&s5p64x0_sysdev);
+}
diff --git a/arch/arm/mach-s5p64x0/dev-audio.c b/arch/arm/mach-s5p64x0/dev-audio.c
new file mode 100644
index 00000000000..fa097bd68ca
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/dev-audio.c
@@ -0,0 +1,164 @@
+/* linux/arch/arm/mach-s5p64x0/dev-audio.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co. Ltd
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/audio.h>
+
+#include <mach/map.h>
+#include <mach/dma.h>
+#include <mach/irqs.h>
+
+static int s5p6440_cfg_i2s(struct platform_device *pdev)
+{
+	/* configure GPIO for i2s port */
+	switch (pdev->id) {
+	case -1:
+		s3c_gpio_cfgpin(S5P6440_GPR(4), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S5P6440_GPR(5), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S5P6440_GPR(6), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S5P6440_GPR(7), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S5P6440_GPR(8), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S5P6440_GPR(13), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S5P6440_GPR(14), S3C_GPIO_SFN(5));
+		break;
+
+	default:
+		printk(KERN_ERR "Invalid Device %d\n", pdev->id);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int s5p6450_cfg_i2s(struct platform_device *pdev)
+{
+	/* configure GPIO for i2s port */
+	switch (pdev->id) {
+	case -1:
+		s3c_gpio_cfgpin(S5P6450_GPB(4), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S5P6450_GPR(4), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S5P6450_GPR(5), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S5P6450_GPR(6), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S5P6450_GPR(7), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S5P6450_GPR(8), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S5P6450_GPR(13), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S5P6450_GPR(14), S3C_GPIO_SFN(5));
+		break;
+
+	default:
+		printk(KERN_ERR "Invalid Device %d\n", pdev->id);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct s3c_audio_pdata s5p6440_i2s_pdata = {
+	.cfg_gpio = s5p6440_cfg_i2s,
+};
+
+static struct s3c_audio_pdata s5p6450_i2s_pdata = {
+	.cfg_gpio = s5p6450_cfg_i2s,
+};
+
+static struct resource s5p64x0_iis0_resource[] = {
+	[0] = {
+		.start	= S5P64X0_PA_I2S,
+		.end	= S5P64X0_PA_I2S + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= DMACH_I2S0_TX,
+		.end	= DMACH_I2S0_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[2] = {
+		.start	= DMACH_I2S0_RX,
+		.end	= DMACH_I2S0_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5p6440_device_iis = {
+	.name		= "s3c64xx-iis-v4",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s5p64x0_iis0_resource),
+	.resource	= s5p64x0_iis0_resource,
+	.dev = {
+		.platform_data = &s5p6440_i2s_pdata,
+	},
+};
+
+struct platform_device s5p6450_device_iis0 = {
+	.name		= "s3c64xx-iis-v4",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s5p64x0_iis0_resource),
+	.resource	= s5p64x0_iis0_resource,
+	.dev = {
+		.platform_data = &s5p6450_i2s_pdata,
+	},
+};
+
+/* PCM Controller platform_devices */
+
+static int s5p6440_pcm_cfg_gpio(struct platform_device *pdev)
+{
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin(S5P6440_GPR(7), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6440_GPR(13), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6440_GPR(14), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6440_GPR(8), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6440_GPR(6), S3C_GPIO_SFN(2));
+		break;
+
+	default:
+		printk(KERN_DEBUG "Invalid PCM Controller number!");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct s3c_audio_pdata s5p6440_pcm_pdata = {
+	.cfg_gpio = s5p6440_pcm_cfg_gpio,
+};
+
+static struct resource s5p6440_pcm0_resource[] = {
+	[0] = {
+		.start	= S5P64X0_PA_PCM,
+		.end	= S5P64X0_PA_PCM + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= DMACH_PCM0_TX,
+		.end	= DMACH_PCM0_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[2] = {
+		.start	= DMACH_PCM0_RX,
+		.end	= DMACH_PCM0_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5p6440_device_pcm = {
+	.name		= "samsung-pcm",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s5p6440_pcm0_resource),
+	.resource	= s5p6440_pcm0_resource,
+	.dev = {
+		.platform_data = &s5p6440_pcm_pdata,
+	},
+};
diff --git a/arch/arm/mach-s5p64x0/dev-spi.c b/arch/arm/mach-s5p64x0/dev-spi.c
new file mode 100644
index 00000000000..5b69ec4c8af
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/dev-spi.c
@@ -0,0 +1,232 @@
+/* linux/arch/arm/mach-s5p64x0/dev-spi.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
+
+#include <mach/dma.h>
+#include <mach/map.h>
+#include <mach/irqs.h>
+#include <mach/regs-clock.h>
+#include <mach/spi-clocks.h>
+
+#include <plat/s3c64xx-spi.h>
+#include <plat/gpio-cfg.h>
+
+static char *s5p64x0_spi_src_clks[] = {
+	[S5P64X0_SPI_SRCCLK_PCLK] = "pclk",
+	[S5P64X0_SPI_SRCCLK_SCLK] = "sclk_spi",
+};
+
+/* SPI Controller platform_devices */
+
+/* Since we emulate multi-cs capability, we do not touch the CS.
+ * The emulated CS is toggled by board specific mechanism, as it can
+ * be either some immediate GPIO or some signal out of some other
+ * chip in between ... or some yet another way.
+ * We simply do not assume anything about CS.
+ */
+static int s5p6440_spi_cfg_gpio(struct platform_device *pdev)
+{
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin(S5P6440_GPC(0), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6440_GPC(1), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6440_GPC(2), S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(S5P6440_GPC(0), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5P6440_GPC(1), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5P6440_GPC(2), S3C_GPIO_PULL_UP);
+		break;
+
+	case 1:
+		s3c_gpio_cfgpin(S5P6440_GPC(4), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6440_GPC(5), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6440_GPC(6), S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(S5P6440_GPC(4), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5P6440_GPC(5), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5P6440_GPC(6), S3C_GPIO_PULL_UP);
+		break;
+
+	default:
+		dev_err(&pdev->dev, "Invalid SPI Controller number!");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int s5p6450_spi_cfg_gpio(struct platform_device *pdev)
+{
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin(S5P6450_GPC(0), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6450_GPC(1), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6450_GPC(2), S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(S5P6450_GPC(0), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5P6450_GPC(1), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5P6450_GPC(2), S3C_GPIO_PULL_UP);
+		break;
+
+	case 1:
+		s3c_gpio_cfgpin(S5P6450_GPC(4), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6450_GPC(5), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6450_GPC(6), S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(S5P6450_GPC(4), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5P6450_GPC(5), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5P6450_GPC(6), S3C_GPIO_PULL_UP);
+		break;
+
+	default:
+		dev_err(&pdev->dev, "Invalid SPI Controller number!");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct resource s5p64x0_spi0_resource[] = {
+	[0] = {
+		.start	= S5P64X0_PA_SPI0,
+		.end	= S5P64X0_PA_SPI0 + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= DMACH_SPI0_TX,
+		.end	= DMACH_SPI0_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[2] = {
+		.start	= DMACH_SPI0_RX,
+		.end	= DMACH_SPI0_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= IRQ_SPI0,
+		.end	= IRQ_SPI0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c64xx_spi_info s5p6440_spi0_pdata = {
+	.cfg_gpio	= s5p6440_spi_cfg_gpio,
+	.fifo_lvl_mask	= 0x1ff,
+	.rx_lvl_offset	= 15,
+};
+
+static struct s3c64xx_spi_info s5p6450_spi0_pdata = {
+	.cfg_gpio	= s5p6450_spi_cfg_gpio,
+	.fifo_lvl_mask	= 0x1ff,
+	.rx_lvl_offset	= 15,
+};
+
+static u64 spi_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s5p64x0_device_spi0 = {
+	.name		= "s3c64xx-spi",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s5p64x0_spi0_resource),
+	.resource	= s5p64x0_spi0_resource,
+	.dev = {
+		.dma_mask		= &spi_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+static struct resource s5p64x0_spi1_resource[] = {
+	[0] = {
+		.start	= S5P64X0_PA_SPI1,
+		.end	= S5P64X0_PA_SPI1 + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= DMACH_SPI1_TX,
+		.end	= DMACH_SPI1_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[2] = {
+		.start	= DMACH_SPI1_RX,
+		.end	= DMACH_SPI1_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= IRQ_SPI1,
+		.end	= IRQ_SPI1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c64xx_spi_info s5p6440_spi1_pdata = {
+	.cfg_gpio	= s5p6440_spi_cfg_gpio,
+	.fifo_lvl_mask	= 0x7f,
+	.rx_lvl_offset	= 15,
+};
+
+static struct s3c64xx_spi_info s5p6450_spi1_pdata = {
+	.cfg_gpio	= s5p6450_spi_cfg_gpio,
+	.fifo_lvl_mask	= 0x7f,
+	.rx_lvl_offset	= 15,
+};
+
+struct platform_device s5p64x0_device_spi1 = {
+	.name		= "s3c64xx-spi",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(s5p64x0_spi1_resource),
+	.resource	= s5p64x0_spi1_resource,
+	.dev = {
+		.dma_mask		= &spi_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+void __init s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
+{
+	unsigned int id;
+	struct s3c64xx_spi_info *pd;
+
+	id = __raw_readl(S5P64X0_SYS_ID) & 0xFF000;
+
+	/* Reject invalid configuration */
+	if (!num_cs || src_clk_nr < 0
+			|| src_clk_nr > S5P64X0_SPI_SRCCLK_SCLK) {
+		printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__);
+		return;
+	}
+
+	switch (cntrlr) {
+	case 0:
+		if (id == 0x50000)
+			pd = &s5p6450_spi0_pdata;
+		else
+			pd = &s5p6440_spi0_pdata;
+
+		s5p64x0_device_spi0.dev.platform_data = pd;
+		break;
+	case 1:
+		if (id == 0x50000)
+			pd = &s5p6450_spi1_pdata;
+		else
+			pd = &s5p6440_spi1_pdata;
+
+		s5p64x0_device_spi1.dev.platform_data = pd;
+		break;
+	default:
+		printk(KERN_ERR "%s: Invalid SPI controller(%d)\n",
+							__func__, cntrlr);
+		return;
+	}
+
+	pd->num_cs = num_cs;
+	pd->src_clk_nr = src_clk_nr;
+	pd->src_clk_name = s5p64x0_spi_src_clks[src_clk_nr];
+}
diff --git a/arch/arm/mach-s5p6440/dma.c b/arch/arm/mach-s5p64x0/dma.c
index 07606ad5751..29a8c241004 100644
--- a/arch/arm/mach-s5p6440/dma.c
+++ b/arch/arm/mach-s5p64x0/dma.c
@@ -1,4 +1,8 @@
-/*
+/* linux/arch/arm/mach-s5p64x0/dma.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
  * Copyright (C) 2010 Samsung Electronics Co. Ltd.
  *	Jaswinder Singh <jassi.brar@samsung.com>
  *
@@ -15,26 +19,25 @@
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
+*/
 
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 
-#include <plat/devs.h>
-#include <plat/irqs.h>
-
 #include <mach/map.h>
 #include <mach/irqs.h>
+#include <mach/regs-clock.h>
 
+#include <plat/devs.h>
 #include <plat/s3c-pl330-pdata.h>
 
 static u64 dma_dmamask = DMA_BIT_MASK(32);
 
-static struct resource s5p6440_pdma_resource[] = {
+static struct resource s5p64x0_pdma_resource[] = {
 	[0] = {
-		.start  = S5P6440_PA_PDMA,
-		.end    = S5P6440_PA_PDMA + SZ_4K,
-		.flags = IORESOURCE_MEM,
+		.start	= S5P64X0_PA_PDMA,
+		.end	= S5P64X0_PA_PDMA + SZ_4K,
+		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
 		.start	= IRQ_DMA0,
@@ -80,26 +83,67 @@ static struct s3c_pl330_platdata s5p6440_pdma_pdata = {
 	},
 };
 
-static struct platform_device s5p6440_device_pdma = {
+static struct s3c_pl330_platdata s5p6450_pdma_pdata = {
+	.peri = {
+		[0] = DMACH_UART0_RX,
+		[1] = DMACH_UART0_TX,
+		[2] = DMACH_UART1_RX,
+		[3] = DMACH_UART1_TX,
+		[4] = DMACH_UART2_RX,
+		[5] = DMACH_UART2_TX,
+		[6] = DMACH_UART3_RX,
+		[7] = DMACH_UART3_TX,
+		[8] = DMACH_UART4_RX,
+		[9] = DMACH_UART4_TX,
+		[10] = DMACH_PCM0_TX,
+		[11] = DMACH_PCM0_RX,
+		[12] = DMACH_I2S0_TX,
+		[13] = DMACH_I2S0_RX,
+		[14] = DMACH_SPI0_TX,
+		[15] = DMACH_SPI0_RX,
+		[16] = DMACH_PCM1_TX,
+		[17] = DMACH_PCM1_RX,
+		[18] = DMACH_PCM2_TX,
+		[19] = DMACH_PCM2_RX,
+		[20] = DMACH_SPI1_TX,
+		[21] = DMACH_SPI1_RX,
+		[22] = DMACH_USI_TX,
+		[23] = DMACH_USI_RX,
+		[24] = DMACH_MAX,
+		[25] = DMACH_I2S1_TX,
+		[26] = DMACH_I2S1_RX,
+		[27] = DMACH_I2S2_TX,
+		[28] = DMACH_I2S2_RX,
+		[29] = DMACH_PWM,
+		[30] = DMACH_UART5_RX,
+		[31] = DMACH_UART5_TX,
+	},
+};
+
+static struct platform_device s5p64x0_device_pdma = {
 	.name		= "s3c-pl330",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(s5p6440_pdma_resource),
-	.resource	= s5p6440_pdma_resource,
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s5p64x0_pdma_resource),
+	.resource	= s5p64x0_pdma_resource,
 	.dev		= {
 		.dma_mask = &dma_dmamask,
 		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = &s5p6440_pdma_pdata,
 	},
 };
 
-static struct platform_device *s5p6440_dmacs[] __initdata = {
-	&s5p6440_device_pdma,
-};
-
-static int __init s5p6440_dma_init(void)
+static int __init s5p64x0_dma_init(void)
 {
-	platform_add_devices(s5p6440_dmacs, ARRAY_SIZE(s5p6440_dmacs));
+	unsigned int id;
+
+	id = __raw_readl(S5P64X0_SYS_ID) & 0xFF000;
+
+	if (id == 0x50000)
+		s5p64x0_device_pdma.dev.platform_data = &s5p6450_pdma_pdata;
+	else
+		s5p64x0_device_pdma.dev.platform_data = &s5p6440_pdma_pdata;
+
+	platform_device_register(&s5p64x0_device_pdma);
 
 	return 0;
 }
-arch_initcall(s5p6440_dma_init);
+arch_initcall(s5p64x0_dma_init);
diff --git a/arch/arm/mach-s5p6440/gpio.c b/arch/arm/mach-s5p64x0/gpio.c
index 8bf6e0ce51c..39159dd5a29 100644
--- a/arch/arm/mach-s5p6440/gpio.c
+++ b/arch/arm/mach-s5p64x0/gpio.c
@@ -1,14 +1,14 @@
-/* arch/arm/mach-s5p6440/gpio.c
+/* linux/arch/arm/mach-s5p64x0/gpio.c
  *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- * 		http://www.samsung.com/
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
  *
- * S5P6440 - GPIOlib support
+ * S5P64X0 - GPIOlib support
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- */
+*/
 
 #include <linux/kernel.h>
 #include <linux/irq.h>
@@ -22,26 +22,29 @@
 #include <plat/gpio-cfg.h>
 #include <plat/gpio-cfg-helpers.h>
 
-/* GPIO bank summary:
-*
-* Bank	GPIOs	Style	SlpCon	ExtInt Group
-* A	6	4Bit	Yes	1
-* B	7	4Bit	Yes	1
-* C	8	4Bit	Yes	2
-* F	2	2Bit	Yes	4 [1]
-* G	7	4Bit	Yes	5
-* H	10	4Bit[2]	Yes	6
-* I	16	2Bit	Yes	None
-* J	12	2Bit	Yes	None
-* N	16	2Bit	No	IRQ_EINT
-* P	8	2Bit	Yes	8
-* R	15	4Bit[2]	Yes	8
-*
-* [1] BANKF pins 14,15 do not form part of the external interrupt sources
-* [2] BANK has two control registers, GPxCON0 and GPxCON1
-*/
+/* To be implemented S5P6450 GPIO */
+
+/*
+ * S5P6440 GPIO bank summary:
+ *
+ * Bank	GPIOs	Style	SlpCon	ExtInt Group
+ * A	6	4Bit	Yes	1
+ * B	7	4Bit	Yes	1
+ * C	8	4Bit	Yes	2
+ * F	2	2Bit	Yes	4 [1]
+ * G	7	4Bit	Yes	5
+ * H	10	4Bit[2]	Yes	6
+ * I	16	2Bit	Yes	None
+ * J	12	2Bit	Yes	None
+ * N	16	2Bit	No	IRQ_EINT
+ * P	8	2Bit	Yes	8
+ * R	15	4Bit[2]	Yes	8
+ *
+ * [1] BANKF pins 14,15 do not form part of the external interrupt sources
+ * [2] BANK has two control registers, GPxCON0 and GPxCON1
+ */
 
-static int s5p6440_gpiolib_rbank_4bit2_input(struct gpio_chip *chip,
+static int s5p64x0_gpiolib_rbank_4bit2_input(struct gpio_chip *chip,
 					     unsigned int offset)
 {
 	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
@@ -77,7 +80,7 @@ static int s5p6440_gpiolib_rbank_4bit2_input(struct gpio_chip *chip,
 	return 0;
 }
 
-static int s5p6440_gpiolib_rbank_4bit2_output(struct gpio_chip *chip,
+static int s5p64x0_gpiolib_rbank_4bit2_output(struct gpio_chip *chip,
 					      unsigned int offset, int value)
 {
 	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
@@ -124,12 +127,11 @@ static int s5p6440_gpiolib_rbank_4bit2_output(struct gpio_chip *chip,
 	return 0;
 }
 
-int s5p6440_gpio_setcfg_4bit_rbank(struct s3c_gpio_chip *chip,
+int s5p64x0_gpio_setcfg_4bit_rbank(struct s3c_gpio_chip *chip,
 				   unsigned int off, unsigned int cfg)
 {
 	void __iomem *reg = chip->base;
 	unsigned int shift;
-	unsigned long flags;
 	u32 con;
 
 	switch (off) {
@@ -155,26 +157,22 @@ int s5p6440_gpio_setcfg_4bit_rbank(struct s3c_gpio_chip *chip,
 		cfg <<= shift;
 	}
 
-	s3c_gpio_lock(chip, flags);
-
 	con = __raw_readl(reg);
 	con &= ~(0xf << shift);
 	con |= cfg;
 	__raw_writel(con, reg);
 
-	s3c_gpio_unlock(chip, flags);
-
 	return 0;
 }
 
-static struct s3c_gpio_cfg s5p6440_gpio_cfgs[] = {
+static struct s3c_gpio_cfg s5p64x0_gpio_cfgs[] = {
 	{
 		.cfg_eint	= 0,
 	}, {
 		.cfg_eint	= 7,
 	}, {
 		.cfg_eint	= 3,
-		.set_config	= s5p6440_gpio_setcfg_4bit_rbank,
+		.set_config	= s5p64x0_gpio_setcfg_4bit_rbank,
 	}, {
 		.cfg_eint	= 0,
 		.set_config	= s3c_gpio_setcfg_s3c24xx,
@@ -193,7 +191,7 @@ static struct s3c_gpio_cfg s5p6440_gpio_cfgs[] = {
 static struct s3c_gpio_chip s5p6440_gpio_4bit[] = {
 	{
 		.base	= S5P6440_GPA_BASE,
-		.config	= &s5p6440_gpio_cfgs[1],
+		.config	= &s5p64x0_gpio_cfgs[1],
 		.chip	= {
 			.base	= S5P6440_GPA(0),
 			.ngpio	= S5P6440_GPIO_A_NR,
@@ -201,7 +199,7 @@ static struct s3c_gpio_chip s5p6440_gpio_4bit[] = {
 		},
 	}, {
 		.base	= S5P6440_GPB_BASE,
-		.config	= &s5p6440_gpio_cfgs[1],
+		.config	= &s5p64x0_gpio_cfgs[1],
 		.chip	= {
 			.base	= S5P6440_GPB(0),
 			.ngpio	= S5P6440_GPIO_B_NR,
@@ -209,7 +207,7 @@ static struct s3c_gpio_chip s5p6440_gpio_4bit[] = {
 		},
 	}, {
 		.base	= S5P6440_GPC_BASE,
-		.config	= &s5p6440_gpio_cfgs[1],
+		.config	= &s5p64x0_gpio_cfgs[1],
 		.chip	= {
 			.base	= S5P6440_GPC(0),
 			.ngpio	= S5P6440_GPIO_C_NR,
@@ -217,7 +215,7 @@ static struct s3c_gpio_chip s5p6440_gpio_4bit[] = {
 		},
 	}, {
 		.base	= S5P6440_GPG_BASE,
-		.config	= &s5p6440_gpio_cfgs[1],
+		.config	= &s5p64x0_gpio_cfgs[1],
 		.chip	= {
 			.base	= S5P6440_GPG(0),
 			.ngpio	= S5P6440_GPIO_G_NR,
@@ -229,7 +227,7 @@ static struct s3c_gpio_chip s5p6440_gpio_4bit[] = {
 static struct s3c_gpio_chip s5p6440_gpio_4bit2[] = {
 	{
 		.base	= S5P6440_GPH_BASE + 0x4,
-		.config	= &s5p6440_gpio_cfgs[1],
+		.config	= &s5p64x0_gpio_cfgs[1],
 		.chip	= {
 			.base	= S5P6440_GPH(0),
 			.ngpio	= S5P6440_GPIO_H_NR,
@@ -238,10 +236,10 @@ static struct s3c_gpio_chip s5p6440_gpio_4bit2[] = {
 	},
 };
 
-static struct s3c_gpio_chip gpio_rbank_4bit2[] = {
+static struct s3c_gpio_chip s5p6440_gpio_rbank_4bit2[] = {
 	{
 		.base	= S5P6440_GPR_BASE + 0x4,
-		.config	= &s5p6440_gpio_cfgs[2],
+		.config	= &s5p64x0_gpio_cfgs[2],
 		.chip	= {
 			.base	= S5P6440_GPR(0),
 			.ngpio	= S5P6440_GPIO_R_NR,
@@ -253,7 +251,7 @@ static struct s3c_gpio_chip gpio_rbank_4bit2[] = {
 static struct s3c_gpio_chip s5p6440_gpio_2bit[] = {
 	{
 		.base	= S5P6440_GPF_BASE,
-		.config	= &s5p6440_gpio_cfgs[5],
+		.config	= &s5p64x0_gpio_cfgs[5],
 		.chip	= {
 			.base	= S5P6440_GPF(0),
 			.ngpio	= S5P6440_GPIO_F_NR,
@@ -261,7 +259,7 @@ static struct s3c_gpio_chip s5p6440_gpio_2bit[] = {
 		},
 	}, {
 		.base	= S5P6440_GPI_BASE,
-		.config	= &s5p6440_gpio_cfgs[3],
+		.config	= &s5p64x0_gpio_cfgs[3],
 		.chip	= {
 			.base	= S5P6440_GPI(0),
 			.ngpio	= S5P6440_GPIO_I_NR,
@@ -269,7 +267,7 @@ static struct s3c_gpio_chip s5p6440_gpio_2bit[] = {
 		},
 	}, {
 		.base	= S5P6440_GPJ_BASE,
-		.config	= &s5p6440_gpio_cfgs[3],
+		.config	= &s5p64x0_gpio_cfgs[3],
 		.chip	= {
 			.base	= S5P6440_GPJ(0),
 			.ngpio	= S5P6440_GPIO_J_NR,
@@ -277,7 +275,7 @@ static struct s3c_gpio_chip s5p6440_gpio_2bit[] = {
 		},
 	}, {
 		.base	= S5P6440_GPN_BASE,
-		.config	= &s5p6440_gpio_cfgs[4],
+		.config	= &s5p64x0_gpio_cfgs[4],
 		.chip	= {
 			.base	= S5P6440_GPN(0),
 			.ngpio	= S5P6440_GPIO_N_NR,
@@ -285,7 +283,7 @@ static struct s3c_gpio_chip s5p6440_gpio_2bit[] = {
 		},
 	}, {
 		.base	= S5P6440_GPP_BASE,
-		.config	= &s5p6440_gpio_cfgs[5],
+		.config	= &s5p64x0_gpio_cfgs[5],
 		.chip	= {
 			.base	= S5P6440_GPP(0),
 			.ngpio	= S5P6440_GPIO_P_NR,
@@ -294,7 +292,7 @@ static struct s3c_gpio_chip s5p6440_gpio_2bit[] = {
 	},
 };
 
-void __init s5p6440_gpiolib_set_cfg(struct s3c_gpio_cfg *chipcfg, int nr_chips)
+void __init s5p64x0_gpiolib_set_cfg(struct s3c_gpio_cfg *chipcfg, int nr_chips)
 {
 	for (; nr_chips > 0; nr_chips--, chipcfg++) {
 		if (!chipcfg->set_config)
@@ -308,13 +306,13 @@ void __init s5p6440_gpiolib_set_cfg(struct s3c_gpio_cfg *chipcfg, int nr_chips)
 	}
 }
 
-static void __init s5p6440_gpio_add_rbank_4bit2(struct s3c_gpio_chip *chip,
+static void __init s5p64x0_gpio_add_rbank_4bit2(struct s3c_gpio_chip *chip,
 						int nr_chips)
 {
 	for (; nr_chips > 0; nr_chips--, chip++) {
-		chip->chip.direction_input = s5p6440_gpiolib_rbank_4bit2_input;
+		chip->chip.direction_input = s5p64x0_gpiolib_rbank_4bit2_input;
 		chip->chip.direction_output =
-					s5p6440_gpiolib_rbank_4bit2_output;
+					s5p64x0_gpiolib_rbank_4bit2_output;
 		s3c_gpiolib_add(chip);
 	}
 }
@@ -324,8 +322,8 @@ static int __init s5p6440_gpiolib_init(void)
 	struct s3c_gpio_chip *chips = s5p6440_gpio_2bit;
 	int nr_chips = ARRAY_SIZE(s5p6440_gpio_2bit);
 
-	s5p6440_gpiolib_set_cfg(s5p6440_gpio_cfgs,
-				ARRAY_SIZE(s5p6440_gpio_cfgs));
+	s5p64x0_gpiolib_set_cfg(s5p64x0_gpio_cfgs,
+				ARRAY_SIZE(s5p64x0_gpio_cfgs));
 
 	for (; nr_chips > 0; nr_chips--, chips++)
 		s3c_gpiolib_add(chips);
@@ -336,8 +334,8 @@ static int __init s5p6440_gpiolib_init(void)
 	samsung_gpiolib_add_4bit2_chips(s5p6440_gpio_4bit2,
 				ARRAY_SIZE(s5p6440_gpio_4bit2));
 
-	s5p6440_gpio_add_rbank_4bit2(gpio_rbank_4bit2,
-				ARRAY_SIZE(gpio_rbank_4bit2));
+	s5p64x0_gpio_add_rbank_4bit2(s5p6440_gpio_rbank_4bit2,
+				ARRAY_SIZE(s5p6440_gpio_rbank_4bit2));
 
 	return 0;
 }
diff --git a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S
new file mode 100644
index 00000000000..79b04e6a6f8
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S
@@ -0,0 +1,33 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/debug-macro.S
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* pull in the relevant register and map files. */
+
+#include <plat/map-base.h>
+#include <plat/map-s5p.h>
+
+#include <plat/regs-serial.h>
+
+	.macro addruart, rp, rv
+		mov	\rp, #0xE0000000
+		orr	\rp, \rp, #0x00100000
+		ldr	\rp, [\rp, #0x118 ]
+		and	\rp, \rp, #0xff000
+		teq	\rp, #0x50000		@@ S5P6450
+		ldreq	\rp, =0xEC800000
+		movne	\rp, #0xEC000000	@@ S5P6440
+		ldrne	\rv, = S3C_VA_UART
+#if CONFIG_DEBUG_S3C_UART != 0
+		add	\rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
+		add	\rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
+#endif
+	.endm
+
+#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-s5p6440/include/mach/dma.h b/arch/arm/mach-s5p64x0/include/mach/dma.h
index 81209eb1409..81209eb1409 100644
--- a/arch/arm/mach-s5p6440/include/mach/dma.h
+++ b/arch/arm/mach-s5p64x0/include/mach/dma.h
diff --git a/arch/arm/mach-s5p6440/include/mach/entry-macro.S b/arch/arm/mach-s5p64x0/include/mach/entry-macro.S
index e65f1b96726..10b62b4f821 100644
--- a/arch/arm/mach-s5p6440/include/mach/entry-macro.S
+++ b/arch/arm/mach-s5p64x0/include/mach/entry-macro.S
@@ -1,9 +1,9 @@
-/* linux/arch/arm/mach-s5p6440/include/mach/entry-macro.S
+/* linux/arch/arm/mach-s5p64x0/include/mach/entry-macro.S
  *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
  *
- * Low-level IRQ helper macros for the Samsung S5P6440
+ * Low-level IRQ helper macros for the Samsung S5P64X0
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/mach-s5p64x0/include/mach/gpio.h b/arch/arm/mach-s5p64x0/include/mach/gpio.h
new file mode 100644
index 00000000000..5486c8f01f1
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/gpio.h
@@ -0,0 +1,139 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/gpio.h
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P64X0 - GPIO lib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H __FILE__
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+#define gpio_to_irq	__gpio_to_irq
+
+/* GPIO bank sizes */
+
+#define S5P6440_GPIO_A_NR	(6)
+#define S5P6440_GPIO_B_NR	(7)
+#define S5P6440_GPIO_C_NR	(8)
+#define S5P6440_GPIO_F_NR	(2)
+#define S5P6440_GPIO_G_NR	(7)
+#define S5P6440_GPIO_H_NR	(10)
+#define S5P6440_GPIO_I_NR	(16)
+#define S5P6440_GPIO_J_NR	(12)
+#define S5P6440_GPIO_N_NR	(16)
+#define S5P6440_GPIO_P_NR	(8)
+#define S5P6440_GPIO_R_NR	(15)
+
+#define S5P6450_GPIO_A_NR	(6)
+#define S5P6450_GPIO_B_NR	(7)
+#define S5P6450_GPIO_C_NR	(8)
+#define S5P6450_GPIO_D_NR	(8)
+#define S5P6450_GPIO_F_NR	(2)
+#define S5P6450_GPIO_G_NR	(14)
+#define S5P6450_GPIO_H_NR	(10)
+#define S5P6450_GPIO_I_NR	(16)
+#define S5P6450_GPIO_J_NR	(12)
+#define S5P6450_GPIO_K_NR	(5)
+#define S5P6450_GPIO_N_NR	(16)
+#define S5P6450_GPIO_P_NR	(11)
+#define S5P6450_GPIO_Q_NR	(14)
+#define S5P6450_GPIO_R_NR	(15)
+#define S5P6450_GPIO_S_NR	(8)
+
+/* GPIO bank numbers */
+
+/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
+ * space for debugging purposes so that any accidental
+ * change from one gpio bank to another can be caught.
+*/
+
+#define S5P64X0_GPIO_NEXT(__gpio) \
+	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
+
+enum s5p6440_gpio_number {
+	S5P6440_GPIO_A_START	= 0,
+	S5P6440_GPIO_B_START	= S5P64X0_GPIO_NEXT(S5P6440_GPIO_A),
+	S5P6440_GPIO_C_START	= S5P64X0_GPIO_NEXT(S5P6440_GPIO_B),
+	S5P6440_GPIO_F_START	= S5P64X0_GPIO_NEXT(S5P6440_GPIO_C),
+	S5P6440_GPIO_G_START	= S5P64X0_GPIO_NEXT(S5P6440_GPIO_F),
+	S5P6440_GPIO_H_START	= S5P64X0_GPIO_NEXT(S5P6440_GPIO_G),
+	S5P6440_GPIO_I_START	= S5P64X0_GPIO_NEXT(S5P6440_GPIO_H),
+	S5P6440_GPIO_J_START	= S5P64X0_GPIO_NEXT(S5P6440_GPIO_I),
+	S5P6440_GPIO_N_START	= S5P64X0_GPIO_NEXT(S5P6440_GPIO_J),
+	S5P6440_GPIO_P_START	= S5P64X0_GPIO_NEXT(S5P6440_GPIO_N),
+	S5P6440_GPIO_R_START	= S5P64X0_GPIO_NEXT(S5P6440_GPIO_P),
+};
+
+enum s5p6450_gpio_number {
+	S5P6450_GPIO_A_START	= 0,
+	S5P6450_GPIO_B_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_A),
+	S5P6450_GPIO_C_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_B),
+	S5P6450_GPIO_D_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_C),
+	S5P6450_GPIO_F_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_D),
+	S5P6450_GPIO_G_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_F),
+	S5P6450_GPIO_H_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_G),
+	S5P6450_GPIO_I_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_H),
+	S5P6450_GPIO_J_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_I),
+	S5P6450_GPIO_K_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_J),
+	S5P6450_GPIO_N_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_K),
+	S5P6450_GPIO_P_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_N),
+	S5P6450_GPIO_Q_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_P),
+	S5P6450_GPIO_R_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_Q),
+	S5P6450_GPIO_S_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_R),
+};
+
+/* GPIO number definitions */
+
+#define S5P6440_GPA(_nr)	(S5P6440_GPIO_A_START + (_nr))
+#define S5P6440_GPB(_nr)	(S5P6440_GPIO_B_START + (_nr))
+#define S5P6440_GPC(_nr)	(S5P6440_GPIO_C_START + (_nr))
+#define S5P6440_GPF(_nr)	(S5P6440_GPIO_F_START + (_nr))
+#define S5P6440_GPG(_nr)	(S5P6440_GPIO_G_START + (_nr))
+#define S5P6440_GPH(_nr)	(S5P6440_GPIO_H_START + (_nr))
+#define S5P6440_GPI(_nr)	(S5P6440_GPIO_I_START + (_nr))
+#define S5P6440_GPJ(_nr)	(S5P6440_GPIO_J_START + (_nr))
+#define S5P6440_GPN(_nr)	(S5P6440_GPIO_N_START + (_nr))
+#define S5P6440_GPP(_nr)	(S5P6440_GPIO_P_START + (_nr))
+#define S5P6440_GPR(_nr)	(S5P6440_GPIO_R_START + (_nr))
+
+#define S5P6450_GPA(_nr)	(S5P6450_GPIO_A_START + (_nr))
+#define S5P6450_GPB(_nr)	(S5P6450_GPIO_B_START + (_nr))
+#define S5P6450_GPC(_nr)	(S5P6450_GPIO_C_START + (_nr))
+#define S5P6450_GPD(_nr)	(S5P6450_GPIO_D_START + (_nr))
+#define S5P6450_GPF(_nr)	(S5P6450_GPIO_F_START + (_nr))
+#define S5P6450_GPG(_nr)	(S5P6450_GPIO_G_START + (_nr))
+#define S5P6450_GPH(_nr)	(S5P6450_GPIO_H_START + (_nr))
+#define S5P6450_GPI(_nr)	(S5P6450_GPIO_I_START + (_nr))
+#define S5P6450_GPJ(_nr)	(S5P6450_GPIO_J_START + (_nr))
+#define S5P6450_GPK(_nr)	(S5P6450_GPIO_K_START + (_nr))
+#define S5P6450_GPN(_nr)	(S5P6450_GPIO_N_START + (_nr))
+#define S5P6450_GPP(_nr)	(S5P6450_GPIO_P_START + (_nr))
+#define S5P6450_GPQ(_nr)	(S5P6450_GPIO_Q_START + (_nr))
+#define S5P6450_GPR(_nr)	(S5P6450_GPIO_R_START + (_nr))
+#define S5P6450_GPS(_nr)	(S5P6450_GPIO_S_START + (_nr))
+
+/* the end of the S5P64X0 specific gpios */
+
+#define S5P6440_GPIO_END	(S5P6440_GPR(S5P6440_GPIO_R_NR) + 1)
+#define S5P6450_GPIO_END	(S5P6450_GPS(S5P6450_GPIO_S_NR) + 1)
+
+#define S5P64X0_GPIO_END	(S5P6440_GPIO_END > S5P6450_GPIO_END ?	\
+				 S5P6440_GPIO_END : S5P6450_GPIO_END)
+
+#define S3C_GPIO_END		S5P64X0_GPIO_END
+
+/* define the number of gpios we need to the one after the last GPIO range */
+
+#define ARCH_NR_GPIOS		(S5P64X0_GPIO_END + CONFIG_SAMSUNG_GPIO_EXTRA)
+
+#include <asm-generic/gpio.h>
+
+#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/hardware.h b/arch/arm/mach-s5p64x0/include/mach/hardware.h
index be8b26e875d..d3e87996dd9 100644
--- a/arch/arm/mach-s5p6440/include/mach/hardware.h
+++ b/arch/arm/mach-s5p64x0/include/mach/hardware.h
@@ -1,9 +1,9 @@
-/* linux/arch/arm/mach-s5p6440/include/mach/hardware.h
+/* linux/arch/arm/mach-s5p64x0/include/mach/hardware.h
  *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
  *
- * S5P6440 - Hardware support
+ * S5P64X0 - Hardware support
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/mach-s5p64x0/include/mach/i2c.h b/arch/arm/mach-s5p64x0/include/mach/i2c.h
new file mode 100644
index 00000000000..887d25209e8
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/i2c.h
@@ -0,0 +1,17 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/i2c.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P64X0 I2C configuration
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern void s5p6440_i2c0_cfg_gpio(struct platform_device *dev);
+extern void s5p6440_i2c1_cfg_gpio(struct platform_device *dev);
+
+extern void s5p6450_i2c0_cfg_gpio(struct platform_device *dev);
+extern void s5p6450_i2c1_cfg_gpio(struct platform_device *dev);
diff --git a/arch/arm/mach-s5p64x0/include/mach/io.h b/arch/arm/mach-s5p64x0/include/mach/io.h
new file mode 100644
index 00000000000..a3e095c02fb
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/io.h
@@ -0,0 +1,25 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/io.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben-linux@fluff.org>
+ *
+ * Default IO routines for S5P64X0 based
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+/* No current ISA/PCI bus support. */
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
+
+#define IO_SPACE_LIMIT (0xFFFFFFFF)
+
+#endif
diff --git a/arch/arm/mach-s5p6440/include/mach/irqs.h b/arch/arm/mach-s5p64x0/include/mach/irqs.h
index 16a761270de..513abffc760 100644
--- a/arch/arm/mach-s5p6440/include/mach/irqs.h
+++ b/arch/arm/mach-s5p64x0/include/mach/irqs.h
@@ -1,17 +1,17 @@
-/* linux/arch/arm/mach-s5p6440/include/mach/irqs.h
+/* linux/arch/arm/mach-s5p64x0/include/mach/irqs.h
  *
- * Copyright 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
+ * Copyright 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
  *
- * S5P6440 - IRQ definitions
+ * S5P64X0 - IRQ definitions
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
 */
 
-#ifndef __ASM_ARCH_S5P_IRQS_H
-#define __ASM_ARCH_S5P_IRQS_H __FILE__
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H __FILE__
 
 #include <plat/irqs.h>
 
@@ -20,10 +20,12 @@
 #define IRQ_EINT0_3		S5P_IRQ_VIC0(0)
 #define IRQ_EINT4_11		S5P_IRQ_VIC0(1)
 #define IRQ_RTC_TIC		S5P_IRQ_VIC0(2)
+#define IRQ_IIS1		S5P_IRQ_VIC0(3)	/* for only S5P6450 */
+#define IRQ_IIS2		S5P_IRQ_VIC0(4)	/* for only S5P6450 */
 #define IRQ_IIC1		S5P_IRQ_VIC0(5)
 #define IRQ_I2SV40		S5P_IRQ_VIC0(6)
-#define IRQ_GPS			S5P_IRQ_VIC0(7)
-#define IRQ_POST0		S5P_IRQ_VIC0(9)
+#define IRQ_GPS			S5P_IRQ_VIC0(7)	/* for only S5P6450 */
+
 #define IRQ_2D			S5P_IRQ_VIC0(11)
 #define IRQ_TIMER0_VIC		S5P_IRQ_VIC0(23)
 #define IRQ_TIMER1_VIC		S5P_IRQ_VIC0(24)
@@ -39,22 +41,26 @@
 
 #define IRQ_EINT12_15		S5P_IRQ_VIC1(0)
 #define IRQ_PCM0		S5P_IRQ_VIC1(2)
+#define IRQ_PCM1		S5P_IRQ_VIC1(3)	/* for only S5P6450 */
+#define IRQ_PCM2		S5P_IRQ_VIC1(4)	/* for only S5P6450 */
 #define IRQ_UART0		S5P_IRQ_VIC1(5)
 #define IRQ_UART1		S5P_IRQ_VIC1(6)
 #define IRQ_UART2		S5P_IRQ_VIC1(7)
 #define IRQ_UART3		S5P_IRQ_VIC1(8)
 #define IRQ_DMA0		S5P_IRQ_VIC1(9)
+#define IRQ_UART4		S5P_IRQ_VIC1(10)	/* S5P6450 */
+#define IRQ_UART5		S5P_IRQ_VIC1(11)	/* S5P6450 */
 #define IRQ_NFC			S5P_IRQ_VIC1(13)
+#define IRQ_USI			S5P_IRQ_VIC1(15)	/* S5P6450 */
 #define IRQ_SPI0		S5P_IRQ_VIC1(16)
 #define IRQ_SPI1		S5P_IRQ_VIC1(17)
+#define IRQ_HSMMC2		S5P_IRQ_VIC1(17)	/* Shared */
 #define IRQ_IIC			S5P_IRQ_VIC1(18)
 #define IRQ_DISPCON3		S5P_IRQ_VIC1(19)
-#define IRQ_FIMGVG		S5P_IRQ_VIC1(20)
 #define IRQ_EINT_GROUPS		S5P_IRQ_VIC1(21)
-#define IRQ_PMU			S5P_IRQ_VIC1(23)
+#define IRQ_PMU			S5P_IRQ_VIC1(23)	/* S5P6440 */
 #define IRQ_HSMMC0		S5P_IRQ_VIC1(24)
 #define IRQ_HSMMC1		S5P_IRQ_VIC1(25)
-#define IRQ_HSMMC2		IRQ_SPI1	/* shared with SPI1 */
 #define IRQ_OTG			S5P_IRQ_VIC1(26)
 #define IRQ_DSI			S5P_IRQ_VIC1(27)
 #define IRQ_RTC_ALARM		S5P_IRQ_VIC1(28)
@@ -63,6 +69,24 @@
 #define IRQ_TC			IRQ_PENDN
 #define IRQ_ADC			S5P_IRQ_VIC1(31)
 
+/* UART interrupts, S5P6450 has 5 UARTs */
+#define IRQ_S5P_UART_BASE4	(96)
+#define IRQ_S5P_UART_BASE5	(100)
+
+#define IRQ_S5P_UART_RX4	(IRQ_S5P_UART_BASE4 + UART_IRQ_RXD)
+#define IRQ_S5P_UART_TX4	(IRQ_S5P_UART_BASE4 + UART_IRQ_TXD)
+#define IRQ_S5P_UART_ERR4	(IRQ_S5P_UART_BASE4 + UART_IRQ_ERR)
+
+#define IRQ_S5P_UART_RX5	(IRQ_S5P_UART_BASE5 + UART_IRQ_RXD)
+#define IRQ_S5P_UART_TX5	(IRQ_S5P_UART_BASE5 + UART_IRQ_TXD)
+#define IRQ_S5P_UART_ERR5	(IRQ_S5P_UART_BASE5 + UART_IRQ_ERR)
+
+/* S3C compatibilty defines */
+#define IRQ_S3CUART_RX4		IRQ_S5P_UART_RX4
+#define IRQ_S3CUART_RX5		IRQ_S5P_UART_RX5
+
+/* S5P6450 EINT feature will be added */
+
 /*
  * Since the IRQ_EINT(x) are a linear mapping on s5p6440 we just defined
  * them as an IRQ_EINT(x) macro from S5P_IRQ_EINT_BASE which we place
@@ -115,4 +139,4 @@
 
 #define NR_IRQS			(IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR + 1)
 
-#endif /* __ASM_ARCH_S5P_IRQS_H */
+#endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/map.h b/arch/arm/mach-s5p64x0/include/mach/map.h
new file mode 100644
index 00000000000..31e534156e0
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/map.h
@@ -0,0 +1,83 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/map.h
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P64X0 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H __FILE__
+
+#include <plat/map-base.h>
+#include <plat/map-s5p.h>
+
+#define S5P64X0_PA_SDRAM	(0x20000000)
+
+#define S5P64X0_PA_CHIPID	(0xE0000000)
+#define S5P_PA_CHIPID		S5P64X0_PA_CHIPID
+
+#define S5P64X0_PA_SYSCON	(0xE0100000)
+#define S5P_PA_SYSCON		S5P64X0_PA_SYSCON
+
+#define S5P64X0_PA_GPIO		(0xE0308000)
+
+#define S5P64X0_PA_VIC0		(0xE4000000)
+#define S5P64X0_PA_VIC1		(0xE4100000)
+
+#define S5P64X0_PA_PDMA		(0xE9000000)
+
+#define S5P64X0_PA_TIMER	(0xEA000000)
+#define S5P_PA_TIMER		S5P64X0_PA_TIMER
+
+#define S5P64X0_PA_RTC		(0xEA100000)
+
+#define S5P64X0_PA_WDT		(0xEA200000)
+
+#define S5P6440_PA_UART(x)	(0xEC000000 + ((x) * S3C_UART_OFFSET))
+#define S5P6450_PA_UART(x)	((x < 5) ? (0xEC800000 + ((x) * S3C_UART_OFFSET)) : (0xEC000000))
+
+#define S5P_PA_UART0		S5P6450_PA_UART(0)
+#define S5P_PA_UART1		S5P6450_PA_UART(1)
+#define S5P_PA_UART2		S5P6450_PA_UART(2)
+#define S5P_PA_UART3		S5P6450_PA_UART(3)
+#define S5P_PA_UART4		S5P6450_PA_UART(4)
+#define S5P_PA_UART5		S5P6450_PA_UART(5)
+
+#define S5P_SZ_UART		SZ_256
+
+#define S5P6440_PA_IIC0		(0xEC104000)
+#define S5P6440_PA_IIC1		(0xEC20F000)
+#define S5P6450_PA_IIC0		(0xEC100000)
+#define S5P6450_PA_IIC1		(0xEC200000)
+
+#define S5P64X0_PA_SPI0		(0xEC400000)
+#define S5P64X0_PA_SPI1		(0xEC500000)
+
+#define S5P64X0_PA_HSOTG	(0xED100000)
+
+#define S5P64X0_PA_HSMMC(x)	(0xED800000 + ((x) * 0x100000))
+
+#define S5P64X0_PA_I2S		(0xF2000000)
+
+#define S5P64X0_PA_PCM		(0xF2100000)
+
+#define S5P64X0_PA_ADC		(0xF3000000)
+
+/* compatibiltiy defines. */
+
+#define S3C_PA_HSMMC0		S5P64X0_PA_HSMMC(0)
+#define S3C_PA_HSMMC1		S5P64X0_PA_HSMMC(1)
+#define S3C_PA_HSMMC2		S5P64X0_PA_HSMMC(2)
+#define S3C_PA_IIC		S5P6440_PA_IIC0
+#define S3C_PA_IIC1		S5P6440_PA_IIC1
+#define S3C_PA_RTC		S5P64X0_PA_RTC
+#define S3C_PA_WDT		S5P64X0_PA_WDT
+
+#define SAMSUNG_PA_ADC		S5P64X0_PA_ADC
+
+#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/memory.h b/arch/arm/mach-s5p64x0/include/mach/memory.h
index d62910c71b5..1b036b0a24c 100644
--- a/arch/arm/mach-s5p6440/include/mach/memory.h
+++ b/arch/arm/mach-s5p64x0/include/mach/memory.h
@@ -1,9 +1,9 @@
-/* linux/arch/arm/mach-s5p6440/include/mach/memory.h
+/* linux/arch/arm/mach-s5p64x0/include/mach/memory.h
  *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
  *
- * S5P6440 - Memory definitions
+ * S5P64X0 - Memory definitions
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -11,9 +11,9 @@
 */
 
 #ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H __FILE__
 
-#define PHYS_OFFSET     	UL(0x20000000)
+#define PHYS_OFFSET		UL(0x20000000)
 #define CONSISTENT_DMA_SIZE	SZ_8M
 
 #endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/pwm-clock.h b/arch/arm/mach-s5p64x0/include/mach/pwm-clock.h
index 6a2a02fdf12..19fff8b701c 100644
--- a/arch/arm/mach-s5p6440/include/mach/pwm-clock.h
+++ b/arch/arm/mach-s5p64x0/include/mach/pwm-clock.h
@@ -1,16 +1,14 @@
-/* linux/arch/arm/mach-s5p6440/include/mach/pwm-clock.h
+/* linux/arch/arm/mach-s5p64x0/include/mach/pwm-clock.h
  *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
  *      Ben Dooks <ben@simtec.co.uk>
  *      http://armlinux.simtec.co.uk/
  *
- * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h
- *
- * S5P6440 - pwm clock and timer support
+ * S5P64X0 - pwm clock and timer support
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-clock.h b/arch/arm/mach-s5p64x0/include/mach/regs-clock.h
new file mode 100644
index 00000000000..58e1bc81380
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/regs-clock.h
@@ -0,0 +1,63 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/regs-clock.h
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P64X0 - Clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_CLOCK_H
+#define __ASM_ARCH_REGS_CLOCK_H __FILE__
+
+#include <mach/map.h>
+
+#define S5P_CLKREG(x)			(S3C_VA_SYS + (x))
+
+#define S5P64X0_APLL_CON		S5P_CLKREG(0x0C)
+#define S5P64X0_MPLL_CON		S5P_CLKREG(0x10)
+#define S5P64X0_EPLL_CON		S5P_CLKREG(0x14)
+#define S5P64X0_EPLL_CON_K		S5P_CLKREG(0x18)
+
+#define S5P64X0_CLK_SRC0		S5P_CLKREG(0x1C)
+
+#define S5P64X0_CLK_DIV0		S5P_CLKREG(0x20)
+#define S5P64X0_CLK_DIV1		S5P_CLKREG(0x24)
+#define S5P64X0_CLK_DIV2		S5P_CLKREG(0x28)
+
+#define S5P64X0_CLK_GATE_HCLK0		S5P_CLKREG(0x30)
+#define S5P64X0_CLK_GATE_PCLK		S5P_CLKREG(0x34)
+#define S5P64X0_CLK_GATE_SCLK0		S5P_CLKREG(0x38)
+#define S5P64X0_CLK_GATE_MEM0		S5P_CLKREG(0x3C)
+
+#define S5P64X0_CLK_DIV3		S5P_CLKREG(0x40)
+
+#define S5P64X0_CLK_GATE_HCLK1		S5P_CLKREG(0x44)
+#define S5P64X0_CLK_GATE_SCLK1		S5P_CLKREG(0x48)
+
+#define S5P6450_DPLL_CON		S5P_CLKREG(0x50)
+#define S5P6450_DPLL_CON_K		S5P_CLKREG(0x54)
+
+#define S5P64X0_CLK_SRC1		S5P_CLKREG(0x10C)
+
+#define S5P64X0_SYS_ID			S5P_CLKREG(0x118)
+#define S5P64X0_SYS_OTHERS		S5P_CLKREG(0x11C)
+
+#define S5P64X0_PWR_CFG			S5P_CLKREG(0x804)
+#define S5P64X0_OTHERS			S5P_CLKREG(0x900)
+
+#define S5P64X0_CLKDIV0_HCLK_SHIFT	(8)
+#define S5P64X0_CLKDIV0_HCLK_MASK	(0xF << S5P64X0_CLKDIV0_HCLK_SHIFT)
+
+#define S5P64X0_OTHERS_USB_SIG_MASK	(1 << 16)
+
+/* Compatibility defines */
+
+#define ARM_CLK_DIV			S5P64X0_CLK_DIV0
+#define ARM_DIV_RATIO_SHIFT		0
+#define ARM_DIV_MASK			(0xF << ARM_DIV_RATIO_SHIFT)
+
+#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/regs-gpio.h b/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
index 82ff753913d..85f448e20a8 100644
--- a/arch/arm/mach-s5p6440/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
@@ -1,21 +1,24 @@
-/* linux/arch/arm/mach-s5p6440/include/mach/regs-gpio.h
+/* linux/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
  *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
  *
- * S5P6440 - GPIO register definitions
+ * S5P64X0 - GPIO register definitions
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- */
+*/
 
 #ifndef __ASM_ARCH_REGS_GPIO_H
 #define __ASM_ARCH_REGS_GPIO_H __FILE__
 
 #include <mach/map.h>
 
+/* Will be implemented S5P6442 GPIOlib */
+
 /* Base addresses for each of the banks */
+
 #define S5P6440_GPA_BASE		(S5P_VA_GPIO + 0x0000)
 #define S5P6440_GPB_BASE		(S5P_VA_GPIO + 0x0020)
 #define S5P6440_GPC_BASE		(S5P_VA_GPIO + 0x0040)
@@ -27,6 +30,7 @@
 #define S5P6440_GPN_BASE		(S5P_VA_GPIO + 0x0830)
 #define S5P6440_GPP_BASE		(S5P_VA_GPIO + 0x0160)
 #define S5P6440_GPR_BASE		(S5P_VA_GPIO + 0x0290)
+
 #define S5P6440_EINT0CON0		(S5P_VA_GPIO + 0x900)
 #define S5P6440_EINT0FLTCON0		(S5P_VA_GPIO + 0x910)
 #define S5P6440_EINT0FLTCON1		(S5P_VA_GPIO + 0x914)
@@ -34,19 +38,23 @@
 #define S5P6440_EINT0PEND		(S5P_VA_GPIO + 0x924)
 
 /* for LCD */
+
 #define S5P6440_SPCON_LCD_SEL_RGB	(1 << 0)
 #define S5P6440_SPCON_LCD_SEL_MASK	(3 << 0)
 
-/* These set of macros are not really useful for the
- * GPF/GPI/GPJ/GPN/GPP,
- * useful for others set of GPIO's (4 bit)
+/*
+ * These set of macros are not really useful for the
+ * GPF/GPI/GPJ/GPN/GPP, useful for others set of GPIO's (4 bit)
  */
+
 #define S5P6440_GPIO_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
 #define S5P6440_GPIO_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
 #define S5P6440_GPIO_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
 
-/* Use these macros for GPF/GPI/GPJ/GPN/GPP set of GPIO (2 bit)
- * */
+/*
+ * Use these macros for GPF/GPI/GPJ/GPN/GPP set of GPIO (2 bit)
+ */
+
 #define S5P6440_GPIO2_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
 #define S5P6440_GPIO2_INPUT(__gpio)	(0x0 << ((__gpio) * 2))
 #define S5P6440_GPIO2_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
diff --git a/arch/arm/mach-s5p6440/include/mach/regs-irq.h b/arch/arm/mach-s5p64x0/include/mach/regs-irq.h
index a961f4beeb0..4aaebdace55 100644
--- a/arch/arm/mach-s5p6440/include/mach/regs-irq.h
+++ b/arch/arm/mach-s5p64x0/include/mach/regs-irq.h
@@ -1,9 +1,9 @@
-/* linux/arch/arm/mach-s5p6440/include/mach/regs-irq.h
+/* linux/arch/arm/mach-s5p64x0/include/mach/regs-irq.h
  *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
  *
- * S5P6440 - IRQ register definitions
+ * S5P64X0 - IRQ register definitions
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h b/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h
new file mode 100644
index 00000000000..ff85b4b6e8d
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h
@@ -0,0 +1,46 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Header file for s5p64x0 clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_CLOCK_H
+#define __ASM_ARCH_CLOCK_H __FILE__
+
+#include <linux/clk.h>
+
+extern struct clksrc_clk clk_mout_apll;
+extern struct clksrc_clk clk_mout_mpll;
+extern struct clksrc_clk clk_mout_epll;
+
+extern int s5p64x0_epll_enable(struct clk *clk, int enable);
+extern unsigned long s5p64x0_epll_get_rate(struct clk *clk);
+
+extern unsigned long s5p64x0_armclk_get_rate(struct clk *clk);
+extern unsigned long s5p64x0_armclk_round_rate(struct clk *clk, unsigned long rate);
+extern int s5p64x0_armclk_set_rate(struct clk *clk, unsigned long rate);
+
+extern struct clk_ops s5p64x0_clkarm_ops;
+
+extern struct clksrc_clk clk_armclk;
+extern struct clksrc_clk clk_dout_mpll;
+
+extern struct clk *clkset_hclk_low_list[];
+extern struct clksrc_sources clkset_hclk_low;
+
+extern int s5p64x0_pclk_ctrl(struct clk *clk, int enable);
+extern int s5p64x0_hclk0_ctrl(struct clk *clk, int enable);
+extern int s5p64x0_hclk1_ctrl(struct clk *clk, int enable);
+extern int s5p64x0_sclk_ctrl(struct clk *clk, int enable);
+extern int s5p64x0_sclk1_ctrl(struct clk *clk, int enable);
+extern int s5p64x0_mem_ctrl(struct clk *clk, int enable);
+
+extern int s5p64x0_clk48m_ctrl(struct clk *clk, int enable);
+
+#endif /* __ASM_ARCH_CLOCK_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h b/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h
new file mode 100644
index 00000000000..170a20a9643
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h
@@ -0,0 +1,20 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_SPI_CLKS_H
+#define __ASM_ARCH_SPI_CLKS_H __FILE__
+
+#define S5P64X0_SPI_SRCCLK_PCLK		0
+#define S5P64X0_SPI_SRCCLK_SCLK		1
+
+#endif /* __ASM_ARCH_SPI_CLKS_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/system.h b/arch/arm/mach-s5p64x0/include/mach/system.h
index a359ee3fa51..60f57532c97 100644
--- a/arch/arm/mach-s5p6440/include/mach/system.h
+++ b/arch/arm/mach-s5p64x0/include/mach/system.h
@@ -1,9 +1,9 @@
-/* linux/arch/arm/mach-s5p6440/include/mach/system.h
+/* linux/arch/arm/mach-s5p64x0/include/mach/system.h
  *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
  *
- * S5P6440 - system support header
+ * S5P64X0 - system support header
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/mach-s5p6440/include/mach/tick.h b/arch/arm/mach-s5p64x0/include/mach/tick.h
index 2f25c7f0797..00aa7f1d8e5 100644
--- a/arch/arm/mach-s5p6440/include/mach/tick.h
+++ b/arch/arm/mach-s5p64x0/include/mach/tick.h
@@ -1,9 +1,14 @@
-/* linux/arch/arm/mach-s5p6440/include/mach/tick.h
+/* linux/arch/arm/mach-s5p64x0/include/mach/tick.h
  *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
  *
- * S5P6440 - Timer tick support definitions
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S5P64X0 - Timer tick support definitions
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/mach-s5p6440/include/mach/timex.h b/arch/arm/mach-s5p64x0/include/mach/timex.h
index fb2e8cd4082..4b91faa195a 100644
--- a/arch/arm/mach-s5p6440/include/mach/timex.h
+++ b/arch/arm/mach-s5p64x0/include/mach/timex.h
@@ -1,9 +1,12 @@
-/* arch/arm/mach-s3c64xx/include/mach/timex.h
+/* linux/arch/arm/mach-s5p64x0/include/mach/timex.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
  *
  * Copyright (c) 2003-2005 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * S3C6400 - time parameters
+ * S5P64X0 - time parameters
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/mach-s5p64x0/include/mach/uncompress.h b/arch/arm/mach-s5p64x0/include/mach/uncompress.h
new file mode 100644
index 00000000000..c65b229aab2
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/uncompress.h
@@ -0,0 +1,212 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/uncompress.h
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P64X0 - uncompress code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/map.h>
+
+/*
+ * cannot use commonly <plat/uncompress.h>
+ * because uart base of S5P6440 and S5P6450 is different
+ */
+
+typedef unsigned int upf_t;	/* cannot include linux/serial_core.h */
+
+/* uart setup */
+
+static unsigned int fifo_mask;
+static unsigned int fifo_max;
+
+/* forward declerations */
+
+static void arch_detect_cpu(void);
+
+/* defines for UART registers */
+
+#include <plat/regs-serial.h>
+#include <plat/regs-watchdog.h>
+
+/* working in physical space... */
+#undef S3C2410_WDOGREG
+#define S3C2410_WDOGREG(x) ((S3C24XX_PA_WATCHDOG + (x)))
+
+/* how many bytes we allow into the FIFO at a time in FIFO mode */
+#define FIFO_MAX	 (14)
+
+static unsigned long uart_base;
+
+static __inline__ void get_uart_base(void)
+{
+	unsigned int chipid;
+
+	chipid = *(const volatile unsigned int __force *) 0xE0100118;
+
+	uart_base = S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT;
+
+	if ((chipid & 0xff000) == 0x50000)
+		uart_base += 0xEC800000;
+	else
+		uart_base += 0xEC000000;
+}
+
+static __inline__ void uart_wr(unsigned int reg, unsigned int val)
+{
+	volatile unsigned int *ptr;
+
+	get_uart_base();
+	ptr = (volatile unsigned int *)(reg + uart_base);
+	*ptr = val;
+}
+
+static __inline__ unsigned int uart_rd(unsigned int reg)
+{
+	volatile unsigned int *ptr;
+
+	get_uart_base();
+	ptr = (volatile unsigned int *)(reg + uart_base);
+	return *ptr;
+}
+
+/*
+ * we can deal with the case the UARTs are being run
+ * in FIFO mode, so that we don't hold up our execution
+ * waiting for tx to happen...
+ */
+
+static void putc(int ch)
+{
+	if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) {
+		int level;
+
+		while (1) {
+			level = uart_rd(S3C2410_UFSTAT);
+			level &= fifo_mask;
+
+			if (level < fifo_max)
+				break;
+		}
+
+	} else {
+		/* not using fifos */
+
+		while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE) != S3C2410_UTRSTAT_TXE)
+			barrier();
+	}
+
+	/* write byte to transmission register */
+	uart_wr(S3C2410_UTXH, ch);
+}
+
+static inline void flush(void)
+{
+}
+
+#define __raw_writel(d, ad)			\
+	do {							\
+		*((volatile unsigned int __force *)(ad)) = (d); \
+	} while (0)
+
+/*
+ * CONFIG_S3C_BOOT_WATCHDOG
+ *
+ * Simple boot-time watchdog setup, to reboot the system if there is
+ * any problem with the boot process
+ */
+
+#ifdef CONFIG_S3C_BOOT_WATCHDOG
+
+#define WDOG_COUNT (0xff00)
+
+static inline void arch_decomp_wdog(void)
+{
+	__raw_writel(WDOG_COUNT, S3C2410_WTCNT);
+}
+
+static void arch_decomp_wdog_start(void)
+{
+	__raw_writel(WDOG_COUNT, S3C2410_WTDAT);
+	__raw_writel(WDOG_COUNT, S3C2410_WTCNT);
+	__raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x80), S3C2410_WTCON);
+}
+
+#else
+#define arch_decomp_wdog_start()
+#define arch_decomp_wdog()
+#endif
+
+#ifdef CONFIG_S3C_BOOT_ERROR_RESET
+
+static void arch_decomp_error(const char *x)
+{
+	putstr("\n\n");
+	putstr(x);
+	putstr("\n\n -- System resetting\n");
+
+	__raw_writel(0x4000, S3C2410_WTDAT);
+	__raw_writel(0x4000, S3C2410_WTCNT);
+	__raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x40), S3C2410_WTCON);
+
+	while(1);
+}
+
+#define arch_error arch_decomp_error
+#endif
+
+#ifdef CONFIG_S3C_BOOT_UART_FORCE_FIFO
+static inline void arch_enable_uart_fifo(void)
+{
+	u32 fifocon = uart_rd(S3C2410_UFCON);
+
+	if (!(fifocon & S3C2410_UFCON_FIFOMODE)) {
+		fifocon |= S3C2410_UFCON_RESETBOTH;
+		uart_wr(S3C2410_UFCON, fifocon);
+
+		/* wait for fifo reset to complete */
+		while (1) {
+			fifocon = uart_rd(S3C2410_UFCON);
+			if (!(fifocon & S3C2410_UFCON_RESETBOTH))
+				break;
+		}
+	}
+}
+#else
+#define arch_enable_uart_fifo() do { } while(0)
+#endif
+
+static void arch_decomp_setup(void)
+{
+	/*
+	 * we may need to setup the uart(s) here if we are not running
+	 * on an BAST... the BAST will have left the uarts configured
+	 * after calling linux.
+	 */
+
+	arch_detect_cpu();
+	arch_decomp_wdog_start();
+
+	/*
+	 * Enable the UART FIFOs if they where not enabled and our
+	 * configuration says we should turn them on.
+	 */
+
+	arch_enable_uart_fifo();
+}
+
+
+
+static void arch_detect_cpu(void)
+{
+	/* we do not need to do any cpu detection here at the moment. */
+}
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/vmalloc.h b/arch/arm/mach-s5p64x0/include/mach/vmalloc.h
index e3f0eebf520..97a9df38f1c 100644
--- a/arch/arm/mach-s5p6440/include/mach/vmalloc.h
+++ b/arch/arm/mach-s5p64x0/include/mach/vmalloc.h
@@ -1,4 +1,7 @@
-/* arch/arm/mach-s5p6440/include/mach/vmalloc.h
+/* linux/arch/arm/mach-s5p64x0/include/mach/vmalloc.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
  *
  * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
  *
diff --git a/arch/arm/mach-s5p64x0/init.c b/arch/arm/mach-s5p64x0/init.c
new file mode 100644
index 00000000000..79833caf816
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/init.c
@@ -0,0 +1,73 @@
+/* linux/arch/arm/mach-s5p64x0/init.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P64X0 - Init support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+
+#include <mach/map.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/s5p6440.h>
+#include <plat/s5p6450.h>
+#include <plat/regs-serial.h>
+
+static struct s3c24xx_uart_clksrc s5p64x0_serial_clocks[] = {
+	[0] = {
+		.name		= "pclk_low",
+		.divisor	= 1,
+		.min_baud	= 0,
+		.max_baud	= 0,
+	},
+	[1] = {
+		.name		= "uclk1",
+		.divisor	= 1,
+		.min_baud	= 0,
+		.max_baud	= 0,
+	},
+};
+
+/* uart registration process */
+
+void __init s5p64x0_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	struct s3c2410_uartcfg *tcfg = cfg;
+	u32 ucnt;
+
+	for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
+		if (!tcfg->clocks) {
+			tcfg->clocks = s5p64x0_serial_clocks;
+			tcfg->clocks_size = ARRAY_SIZE(s5p64x0_serial_clocks);
+		}
+	}
+}
+
+void __init s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	int uart;
+
+	for (uart = 0; uart < no; uart++) {
+		s5p_uart_resources[uart].resources->start = S5P6440_PA_UART(uart);
+		s5p_uart_resources[uart].resources->end = S5P6440_PA_UART(uart) + S5P_SZ_UART;
+	}
+
+	s5p64x0_common_init_uarts(cfg, no);
+	s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
+}
+
+void __init s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	s5p64x0_common_init_uarts(cfg, no);
+	s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
+}
diff --git a/arch/arm/mach-s5p6440/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c
index 9202aaac3b5..87c3f03c618 100644
--- a/arch/arm/mach-s5p6440/mach-smdk6440.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c
@@ -1,7 +1,7 @@
-/* linux/arch/arm/mach-s5p6440/mach-smdk6440.c
+/* linux/arch/arm/mach-s5p64x0/mach-smdk6440.c
  *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -21,21 +21,22 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/clk.h>
+#include <linux/gpio.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
 
 #include <mach/hardware.h>
 #include <mach/map.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
+#include <mach/regs-clock.h>
+#include <mach/i2c.h>
 
 #include <plat/regs-serial.h>
-
+#include <plat/gpio-cfg.h>
 #include <plat/s5p6440.h>
 #include <plat/clock.h>
-#include <mach/regs-clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/iic.h>
@@ -58,43 +59,60 @@
 
 static struct s3c2410_uartcfg smdk6440_uartcfgs[] __initdata = {
 	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = SMDK6440_UCON_DEFAULT,
-		.ulcon	     = SMDK6440_ULCON_DEFAULT,
-		.ufcon	     = SMDK6440_UFCON_DEFAULT,
+		.hwport		= 0,
+		.flags		= 0,
+		.ucon		= SMDK6440_UCON_DEFAULT,
+		.ulcon		= SMDK6440_ULCON_DEFAULT,
+		.ufcon		= SMDK6440_UFCON_DEFAULT,
 	},
 	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = SMDK6440_UCON_DEFAULT,
-		.ulcon	     = SMDK6440_ULCON_DEFAULT,
-		.ufcon	     = SMDK6440_UFCON_DEFAULT,
+		.hwport		= 1,
+		.flags		= 0,
+		.ucon		= SMDK6440_UCON_DEFAULT,
+		.ulcon		= SMDK6440_ULCON_DEFAULT,
+		.ufcon		= SMDK6440_UFCON_DEFAULT,
 	},
 	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = SMDK6440_UCON_DEFAULT,
-		.ulcon	     = SMDK6440_ULCON_DEFAULT,
-		.ufcon	     = SMDK6440_UFCON_DEFAULT,
+		.hwport		= 2,
+		.flags		= 0,
+		.ucon		= SMDK6440_UCON_DEFAULT,
+		.ulcon		= SMDK6440_ULCON_DEFAULT,
+		.ufcon		= SMDK6440_UFCON_DEFAULT,
 	},
 	[3] = {
-		.hwport	     = 3,
-		.flags	     = 0,
-		.ucon	     = SMDK6440_UCON_DEFAULT,
-		.ulcon	     = SMDK6440_ULCON_DEFAULT,
-		.ufcon	     = SMDK6440_UFCON_DEFAULT,
+		.hwport		= 3,
+		.flags		= 0,
+		.ucon		= SMDK6440_UCON_DEFAULT,
+		.ulcon		= SMDK6440_ULCON_DEFAULT,
+		.ufcon		= SMDK6440_UFCON_DEFAULT,
 	},
 };
 
 static struct platform_device *smdk6440_devices[] __initdata = {
-	&s5p6440_device_iis,
 	&s3c_device_adc,
 	&s3c_device_rtc,
 	&s3c_device_i2c0,
 	&s3c_device_i2c1,
 	&s3c_device_ts,
 	&s3c_device_wdt,
+	&s5p6440_device_iis,
+};
+
+static struct s3c2410_platform_i2c s5p6440_i2c0_data __initdata = {
+	.flags		= 0,
+	.slave_addr	= 0x10,
+	.frequency	= 100*1000,
+	.sda_delay	= 100,
+	.cfg_gpio	= s5p6440_i2c0_cfg_gpio,
+};
+
+static struct s3c2410_platform_i2c s5p6440_i2c1_data __initdata = {
+	.flags		= 0,
+	.bus_num	= 1,
+	.slave_addr	= 0x10,
+	.frequency	= 100*1000,
+	.sda_delay	= 100,
+	.cfg_gpio	= s5p6440_i2c1_cfg_gpio,
 };
 
 static struct i2c_board_info smdk6440_i2c_devs0[] __initdata = {
@@ -113,7 +131,7 @@ static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
 
 static void __init smdk6440_map_io(void)
 {
-	s5p_init_io(NULL, 0, S5P_SYS_ID);
+	s5p_init_io(NULL, 0, S5P64X0_SYS_ID);
 	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(smdk6440_uartcfgs, ARRAY_SIZE(smdk6440_uartcfgs));
 }
@@ -122,9 +140,8 @@ static void __init smdk6440_machine_init(void)
 {
 	s3c24xx_ts_set_platdata(&s3c_ts_platform);
 
-	/* I2C */
-	s3c_i2c0_set_platdata(NULL);
-	s3c_i2c1_set_platdata(NULL);
+	s3c_i2c0_set_platdata(&s5p6440_i2c0_data);
+	s3c_i2c1_set_platdata(&s5p6440_i2c1_data);
 	i2c_register_board_info(0, smdk6440_i2c_devs0,
 			ARRAY_SIZE(smdk6440_i2c_devs0));
 	i2c_register_board_info(1, smdk6440_i2c_devs1,
@@ -135,9 +152,7 @@ static void __init smdk6440_machine_init(void)
 
 MACHINE_START(SMDK6440, "SMDK6440")
 	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
-	.phys_io	= S3C_PA_UART & 0xfff00000,
-	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
-	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.boot_params	= S5P64X0_PA_SDRAM + 0x100,
 
 	.init_irq	= s5p6440_init_irq,
 	.map_io		= smdk6440_map_io,
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c
new file mode 100644
index 00000000000..d609f5af2b9
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c
@@ -0,0 +1,180 @@
+/* linux/arch/arm/mach-s5p64x0/mach-smdk6450.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/i2c.h>
+
+#include <plat/regs-serial.h>
+#include <plat/gpio-cfg.h>
+#include <plat/s5p6450.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/iic.h>
+#include <plat/pll.h>
+#include <plat/adc.h>
+#include <plat/ts.h>
+
+#define SMDK6450_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+				S3C2410_UCON_RXILEVEL |		\
+				S3C2410_UCON_TXIRQMODE |	\
+				S3C2410_UCON_RXIRQMODE |	\
+				S3C2410_UCON_RXFIFO_TOI |	\
+				S3C2443_UCON_RXERR_IRQEN)
+
+#define SMDK6450_ULCON_DEFAULT	S3C2410_LCON_CS8
+
+#define SMDK6450_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+				S3C2440_UFCON_TXTRIG16 |	\
+				S3C2410_UFCON_RXTRIG8)
+
+static struct s3c2410_uartcfg smdk6450_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport		= 0,
+		.flags		= 0,
+		.ucon		= SMDK6450_UCON_DEFAULT,
+		.ulcon		= SMDK6450_ULCON_DEFAULT,
+		.ufcon		= SMDK6450_UFCON_DEFAULT,
+	},
+	[1] = {
+		.hwport		= 1,
+		.flags		= 0,
+		.ucon		= SMDK6450_UCON_DEFAULT,
+		.ulcon		= SMDK6450_ULCON_DEFAULT,
+		.ufcon		= SMDK6450_UFCON_DEFAULT,
+	},
+	[2] = {
+		.hwport		= 2,
+		.flags		= 0,
+		.ucon		= SMDK6450_UCON_DEFAULT,
+		.ulcon		= SMDK6450_ULCON_DEFAULT,
+		.ufcon		= SMDK6450_UFCON_DEFAULT,
+	},
+	[3] = {
+		.hwport		= 3,
+		.flags		= 0,
+		.ucon		= SMDK6450_UCON_DEFAULT,
+		.ulcon		= SMDK6450_ULCON_DEFAULT,
+		.ufcon		= SMDK6450_UFCON_DEFAULT,
+	},
+#if CONFIG_SERIAL_SAMSUNG_UARTS > 4
+	[4] = {
+		.hwport		= 4,
+		.flags		= 0,
+		.ucon		= SMDK6450_UCON_DEFAULT,
+		.ulcon		= SMDK6450_ULCON_DEFAULT,
+		.ufcon		= SMDK6450_UFCON_DEFAULT,
+	},
+#endif
+#if CONFIG_SERIAL_SAMSUNG_UARTS > 5
+	[5] = {
+		.hwport		= 5,
+		.flags		= 0,
+		.ucon		= SMDK6450_UCON_DEFAULT,
+		.ulcon		= SMDK6450_ULCON_DEFAULT,
+		.ufcon		= SMDK6450_UFCON_DEFAULT,
+	},
+#endif
+};
+
+static struct platform_device *smdk6450_devices[] __initdata = {
+	&s3c_device_adc,
+	&s3c_device_rtc,
+	&s3c_device_i2c0,
+	&s3c_device_i2c1,
+	&s3c_device_ts,
+	&s3c_device_wdt,
+	&s5p6450_device_iis0,
+	/* s5p6450_device_spi0 will be added */
+};
+
+static struct s3c2410_platform_i2c s5p6450_i2c0_data __initdata = {
+	.flags		= 0,
+	.slave_addr	= 0x10,
+	.frequency	= 100*1000,
+	.sda_delay	= 100,
+	.cfg_gpio	= s5p6450_i2c0_cfg_gpio,
+};
+
+static struct s3c2410_platform_i2c s5p6450_i2c1_data __initdata = {
+	.flags		= 0,
+	.bus_num	= 1,
+	.slave_addr	= 0x10,
+	.frequency	= 100*1000,
+	.sda_delay	= 100,
+	.cfg_gpio	= s5p6450_i2c1_cfg_gpio,
+};
+
+static struct i2c_board_info smdk6450_i2c_devs0[] __initdata = {
+	{ I2C_BOARD_INFO("24c08", 0x50), },	/* Samsung KS24C080C EEPROM */
+};
+
+static struct i2c_board_info smdk6450_i2c_devs1[] __initdata = {
+	{ I2C_BOARD_INFO("24c128", 0x57), },/* Samsung S524AD0XD1 EEPROM */
+};
+
+static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
+	.delay			= 10000,
+	.presc			= 49,
+	.oversampling_shift	= 2,
+};
+
+static void __init smdk6450_map_io(void)
+{
+	s5p_init_io(NULL, 0, S5P64X0_SYS_ID);
+	s3c24xx_init_clocks(19200000);
+	s3c24xx_init_uarts(smdk6450_uartcfgs, ARRAY_SIZE(smdk6450_uartcfgs));
+}
+
+static void __init smdk6450_machine_init(void)
+{
+	s3c24xx_ts_set_platdata(&s3c_ts_platform);
+
+	s3c_i2c0_set_platdata(&s5p6450_i2c0_data);
+	s3c_i2c1_set_platdata(&s5p6450_i2c1_data);
+	i2c_register_board_info(0, smdk6450_i2c_devs0,
+			ARRAY_SIZE(smdk6450_i2c_devs0));
+	i2c_register_board_info(1, smdk6450_i2c_devs1,
+			ARRAY_SIZE(smdk6450_i2c_devs1));
+
+	platform_add_devices(smdk6450_devices, ARRAY_SIZE(smdk6450_devices));
+}
+
+MACHINE_START(SMDK6450, "SMDK6450")
+	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+	.boot_params	= S5P64X0_PA_SDRAM + 0x100,
+
+	.init_irq	= s5p6450_init_irq,
+	.map_io		= smdk6450_map_io,
+	.init_machine	= smdk6450_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s5p6440/setup-i2c0.c b/arch/arm/mach-s5p64x0/setup-i2c0.c
index 2c99d14f7ac..dc4cc65a501 100644
--- a/arch/arm/mach-s5p6440/setup-i2c0.c
+++ b/arch/arm/mach-s5p64x0/setup-i2c0.c
@@ -1,11 +1,11 @@
-/* linux/arch/arm/mach-s5p6440/setup-i2c0.c
+/* linux/arch/arm/mach-s5p64x0/setup-i2c0.c
  *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
  *
  * I2C0 GPIO configuration.
  *
- * Based on plat-s3c64xx/setup-i2c0.c
+ * Based on plat-s3c64x0/setup-i2c0.c
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -14,17 +14,29 @@
 
 #include <linux/kernel.h>
 #include <linux/types.h>
+#include <linux/gpio.h>
 
 struct platform_device; /* don't need the contents */
 
-#include <linux/gpio.h>
 #include <plat/gpio-cfg.h>
 #include <plat/iic.h>
 
-void s3c_i2c0_cfg_gpio(struct platform_device *dev)
+#include <mach/i2c.h>
+
+void s5p6440_i2c0_cfg_gpio(struct platform_device *dev)
 {
 	s3c_gpio_cfgpin(S5P6440_GPB(5), S3C_GPIO_SFN(2));
 	s3c_gpio_setpull(S5P6440_GPB(5), S3C_GPIO_PULL_UP);
 	s3c_gpio_cfgpin(S5P6440_GPB(6), S3C_GPIO_SFN(2));
 	s3c_gpio_setpull(S5P6440_GPB(6), S3C_GPIO_PULL_UP);
 }
+
+void s5p6450_i2c0_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgpin(S5P6450_GPB(5), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5P6450_GPB(5), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5P6450_GPB(6), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5P6450_GPB(6), S3C_GPIO_PULL_UP);
+}
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev) { }
diff --git a/arch/arm/mach-s5p6440/setup-i2c1.c b/arch/arm/mach-s5p64x0/setup-i2c1.c
index 9a1537f786e..2edd7912f8e 100644
--- a/arch/arm/mach-s5p6440/setup-i2c1.c
+++ b/arch/arm/mach-s5p64x0/setup-i2c1.c
@@ -1,7 +1,7 @@
-/* linux/arch/arm/mach-s5p6440/setup-i2c1.c
+/* linux/arch/arm/mach-s5p64xx/setup-i2c1.c
  *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
  *
  * I2C1 GPIO configuration.
  *
@@ -21,10 +21,22 @@ struct platform_device; /* don't need the contents */
 #include <plat/gpio-cfg.h>
 #include <plat/iic.h>
 
-void s3c_i2c1_cfg_gpio(struct platform_device *dev)
+#include <mach/i2c.h>
+
+void s5p6440_i2c1_cfg_gpio(struct platform_device *dev)
 {
 	s3c_gpio_cfgpin(S5P6440_GPR(9), S3C_GPIO_SFN(6));
 	s3c_gpio_setpull(S5P6440_GPR(9), S3C_GPIO_PULL_UP);
 	s3c_gpio_cfgpin(S5P6440_GPR(10), S3C_GPIO_SFN(6));
 	s3c_gpio_setpull(S5P6440_GPR(10), S3C_GPIO_PULL_UP);
 }
+
+void s5p6450_i2c1_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgpin(S5P6450_GPR(9), S3C_GPIO_SFN(6));
+	s3c_gpio_setpull(S5P6450_GPR(9), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5P6450_GPR(10), S3C_GPIO_SFN(6));
+	s3c_gpio_setpull(S5P6450_GPR(10), S3C_GPIO_PULL_UP);
+}
+
+void s3c_i2c1_cfg_gpio(struct platform_device *dev) { }
diff --git a/arch/arm/mach-s5pc100/cpu.c b/arch/arm/mach-s5pc100/cpu.c
index cd1afbce83e..fd2708e7d8a 100644
--- a/arch/arm/mach-s5pc100/cpu.c
+++ b/arch/arm/mach-s5pc100/cpu.c
@@ -1,5 +1,8 @@
 /* linux/arch/arm/mach-s5pc100/cpu.c
  *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
  * Copyright 2009 Samsung Electronics Co.
  *	Byungho Min <bhmin@samsung.com>
  *
@@ -57,11 +60,31 @@ static struct map_desc s5pc100_iodesc[] __initdata = {
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
 	}, {
+		.virtual	= (unsigned long)S5P_VA_GPIO,
+		.pfn		= __phys_to_pfn(S5PC100_PA_GPIO),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC0,
+		.pfn		= __phys_to_pfn(S5PC100_PA_VIC0),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC1,
+		.pfn		= __phys_to_pfn(S5PC100_PA_VIC1),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
 		.virtual	= (unsigned long)VA_VIC2,
-		.pfn		= __phys_to_pfn(S5P_PA_VIC2),
+		.pfn		= __phys_to_pfn(S5PC100_PA_VIC2),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
 	}, {
+		.virtual	= (unsigned long)S3C_VA_UART,
+		.pfn		= __phys_to_pfn(S3C_PA_UART),
+		.length		= SZ_512K,
+		.type		= MT_DEVICE,
+	}, {
 		.virtual	= (unsigned long)S5PC100_VA_OTHERS,
 		.pfn		= __phys_to_pfn(S5PC100_PA_OTHERS),
 		.length		= SZ_4K,
diff --git a/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
index 70e02e91ee3..b2ba95ddf8e 100644
--- a/arch/arm/mach-s5pc100/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
@@ -22,13 +22,12 @@
 	 * aligned and add in the offset when we load the value here.
 	 */
 
-	.macro addruart, rx, rtmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1
-		ldreq	\rx, = S3C_PA_UART
-		ldrne	\rx, = S3C_VA_UART
+	.macro addruart, rp, rv
+		ldr	\rp, = S3C_PA_UART
+		ldr	\rv, = S3C_VA_UART
 #if CONFIG_DEBUG_S3C_UART != 0
-		add	\rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
+		add	\rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
+		add	\rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
 #endif
 	.endm
 
diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h
index 01b9134feff..8751ef4a680 100644
--- a/arch/arm/mach-s5pc100/include/mach/map.h
+++ b/arch/arm/mach-s5pc100/include/mach/map.h
@@ -44,19 +44,16 @@
 #define S5PC100_PA_OTHERS	(0xE0200000)
 #define S5PC100_VA_OTHERS	(S3C_VA_SYS + 0x10000)
 
-#define S5P_PA_GPIO		(0xE0300000)
+#define S5PC100_PA_GPIO		(0xE0300000)
 #define S5PC1XX_VA_GPIO		S3C_ADDR(0x00500000)
 
 /* Interrupt */
-#define S5PC100_PA_VIC		(0xE4000000)
+#define S5PC100_PA_VIC0		(0xE4000000)
+#define S5PC100_PA_VIC1		(0xE4100000)
+#define S5PC100_PA_VIC2		(0xE4200000)
 #define S5PC100_VA_VIC		S3C_VA_IRQ
-#define S5PC100_PA_VIC_OFFSET	0x100000
 #define S5PC100_VA_VIC_OFFSET	0x10000
-#define S5PC1XX_PA_VIC(x)	(S5PC100_PA_VIC + ((x) * S5PC100_PA_VIC_OFFSET))
 #define S5PC1XX_VA_VIC(x)	(S5PC100_VA_VIC + ((x) * S5PC100_VA_VIC_OFFSET))
-#define S5P_PA_VIC0		S5PC1XX_PA_VIC(0)
-#define S5P_PA_VIC1		S5PC1XX_PA_VIC(1)
-#define S5P_PA_VIC2		S5PC1XX_PA_VIC(2)
 
 
 #define S5PC100_PA_ONENAND	(0xE7100000)
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
index 020c3f98f81..880fb075092 100644
--- a/arch/arm/mach-s5pc100/mach-smdkc100.c
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -235,8 +235,6 @@ static void __init smdkc100_machine_init(void)
 
 MACHINE_START(SMDKC100, "SMDKC100")
 	/* Maintainer: Byungho Min <bhmin@samsung.com> */
-	.phys_io	= S3C_PA_UART & 0xfff00000,
-	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S5P_PA_SDRAM + 0x100,
 	.init_irq	= s5pc100_init_irq,
 	.map_io		= smdkc100_map_io,
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index d3a38955c74..5315fec3db8 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -53,11 +53,6 @@ config S5PV210_SETUP_SDHCI_GPIO
 	help
 	  Common setup code for SDHCI gpio.
 
-config S5PC110_DEV_ONENAND
-	bool
-	help
-	  Compile in platform device definition for OneNAND1 controller
-
 menu "S5PC110 Machines"
 
 config MACH_AQUILA
@@ -71,7 +66,7 @@ config MACH_AQUILA
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_HSMMC2
-	select S5PC110_DEV_ONENAND
+	select S5P_DEV_ONENAND
 	select S5PV210_SETUP_FB_24BPP
 	select S5PV210_SETUP_SDHCI
 	help
@@ -88,7 +83,7 @@ config MACH_GONI
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_HSMMC2
-	select S5PC110_DEV_ONENAND
+	select S5P_DEV_ONENAND
 	select S5PV210_SETUP_FB_24BPP
 	select S5PV210_SETUP_SDHCI
 	help
diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile
index 05048c5aa4c..70454891240 100644
--- a/arch/arm/mach-s5pv210/Makefile
+++ b/arch/arm/mach-s5pv210/Makefile
@@ -26,7 +26,6 @@ obj-$(CONFIG_MACH_GONI)		+= mach-goni.o
 
 obj-y				+= dev-audio.o
 obj-$(CONFIG_S3C64XX_DEV_SPI)	+= dev-spi.o
-obj-$(CONFIG_S5PC110_DEV_ONENAND) += dev-onenand.o
 
 obj-$(CONFIG_S5PV210_SETUP_FB_24BPP)	+= setup-fb-24bpp.o
 obj-$(CONFIG_S5PV210_SETUP_I2C1) 	+= setup-i2c1.o
diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c
index 245b82b53df..2f16bfc0a11 100644
--- a/arch/arm/mach-s5pv210/cpu.c
+++ b/arch/arm/mach-s5pv210/cpu.c
@@ -1,7 +1,7 @@
 /* linux/arch/arm/mach-s5pv210/cpu.c
  *
  * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
+ *		http://www.samsung.com
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -51,6 +51,21 @@ static struct map_desc s5pv210_iodesc[] __initdata = {
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
 	}, {
+		.virtual	= (unsigned long)S5P_VA_GPIO,
+		.pfn		= __phys_to_pfn(S5PV210_PA_GPIO),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC0,
+		.pfn		= __phys_to_pfn(S5PV210_PA_VIC0),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC1,
+		.pfn		= __phys_to_pfn(S5PV210_PA_VIC1),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
 		.virtual	= (unsigned long)VA_VIC2,
 		.pfn		= __phys_to_pfn(S5PV210_PA_VIC2),
 		.length		= SZ_16K,
@@ -61,6 +76,11 @@ static struct map_desc s5pv210_iodesc[] __initdata = {
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
 	}, {
+		.virtual	= (unsigned long)S3C_VA_UART,
+		.pfn		= __phys_to_pfn(S3C_PA_UART),
+		.length		= SZ_512K,
+		.type		= MT_DEVICE,
+	}, {
 		.virtual	= (unsigned long)S5P_VA_SROMC,
 		.pfn		= __phys_to_pfn(S5PV210_PA_SROMC),
 		.length		= SZ_4K,
diff --git a/arch/arm/mach-s5pv210/include/mach/debug-macro.S b/arch/arm/mach-s5pv210/include/mach/debug-macro.S
index 7872f5c3dfc..169fe654a59 100644
--- a/arch/arm/mach-s5pv210/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5pv210/include/mach/debug-macro.S
@@ -21,13 +21,12 @@
 	 * aligned and add in the offset when we load the value here.
 	 */
 
-	.macro addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1
-		ldreq	\rx, = S3C_PA_UART
-		ldrne	\rx, = S3C_VA_UART
+	.macro addruart, rp, rv
+		ldr	\rp, = S3C_PA_UART
+		ldr	\rv, = S3C_VA_UART
 #if CONFIG_DEBUG_S3C_UART != 0
-		add	\rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
+		add	\rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
+		add	\rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
 #endif
 	.endm
 
diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h
index dd4fb6bf14b..bd9afd52466 100644
--- a/arch/arm/mach-s5pv210/include/mach/map.h
+++ b/arch/arm/mach-s5pv210/include/mach/map.h
@@ -17,7 +17,10 @@
 #include <plat/map-s5p.h>
 
 #define S5PC110_PA_ONENAND	(0xB0000000)
+#define S5P_PA_ONENAND		S5PC110_PA_ONENAND
+
 #define S5PC110_PA_ONENAND_DMA	(0xB0600000)
+#define S5P_PA_ONENAND_DMA	S5PC110_PA_ONENAND_DMA
 
 #define S5PV210_PA_CHIPID	(0xE0000000)
 #define S5P_PA_CHIPID		S5PV210_PA_CHIPID
@@ -26,7 +29,6 @@
 #define S5P_PA_SYSCON		S5PV210_PA_SYSCON
 
 #define S5PV210_PA_GPIO		(0xE0200000)
-#define S5P_PA_GPIO		S5PV210_PA_GPIO
 
 /* SPI */
 #define S5PV210_PA_SPI0		0xE1300000
@@ -72,16 +74,9 @@
 #define S5PV210_PA_HSMMC(x)	(0xEB000000 + ((x) * 0x100000))
 
 #define S5PV210_PA_VIC0		(0xF2000000)
-#define S5P_PA_VIC0		S5PV210_PA_VIC0
-
 #define S5PV210_PA_VIC1		(0xF2100000)
-#define S5P_PA_VIC1		S5PV210_PA_VIC1
-
 #define S5PV210_PA_VIC2		(0xF2200000)
-#define S5P_PA_VIC2		S5PV210_PA_VIC2
-
 #define S5PV210_PA_VIC3		(0xF2300000)
-#define S5P_PA_VIC3		S5PV210_PA_VIC3
 
 #define S5PV210_PA_SDRAM	(0x20000000)
 #define S5P_PA_SDRAM		S5PV210_PA_SDRAM
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
index 0dda8012d6b..00883087363 100644
--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -477,7 +477,7 @@ static struct platform_device *aquila_devices[] __initdata = {
 	&aquila_i2c_gpio_pmic,
 	&aquila_device_gpiokeys,
 	&s3c_device_fb,
-	&s5pc110_device_onenand,
+	&s5p_device_onenand,
 	&s3c_device_hsmmc0,
 	&s3c_device_hsmmc1,
 	&s3c_device_hsmmc2,
@@ -516,8 +516,6 @@ MACHINE_START(AQUILA, "Aquila")
 	/* Maintainers:
 	   Marek Szyprowski <m.szyprowski@samsung.com>
 	   Kyungmin Park <kyungmin.park@samsung.com> */
-	.phys_io	= S3C_PA_UART & 0xfff00000,
-	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S5P_PA_SDRAM + 0x100,
 	.init_irq	= s5pv210_init_irq,
 	.map_io		= aquila_map_io,
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index 53754d7d364..d9ecf57fc2a 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -456,7 +456,7 @@ static void goni_setup_sdhci(void)
 
 static struct platform_device *goni_devices[] __initdata = {
 	&s3c_device_fb,
-	&s5pc110_device_onenand,
+	&s5p_device_onenand,
 	&goni_i2c_gpio_pmic,
 	&goni_device_gpiokeys,
 	&s5p_device_fimc0,
@@ -491,8 +491,6 @@ static void __init goni_machine_init(void)
 
 MACHINE_START(GONI, "GONI")
 	/* Maintainers: Kyungmin Park <kyungmin.park@samsung.com> */
-	.phys_io	= S3C_PA_UART & 0xfff00000,
-	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S5P_PA_SDRAM + 0x100,
 	.init_irq	= s5pv210_init_irq,
 	.map_io		= goni_map_io,
diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c
index 8211bb87c54..cea9bca79d8 100644
--- a/arch/arm/mach-s5pv210/mach-smdkc110.c
+++ b/arch/arm/mach-s5pv210/mach-smdkc110.c
@@ -127,8 +127,6 @@ static void __init smdkc110_machine_init(void)
 
 MACHINE_START(SMDKC110, "SMDKC110")
 	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
-	.phys_io	= S3C_PA_UART & 0xfff00000,
-	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S5P_PA_SDRAM + 0x100,
 	.init_irq	= s5pv210_init_irq,
 	.map_io		= smdkc110_map_io,
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index fbbc0a3c373..83189ae9da9 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -165,8 +165,6 @@ static void __init smdkv210_machine_init(void)
 
 MACHINE_START(SMDKV210, "SMDKV210")
 	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
-	.phys_io	= S3C_PA_UART & 0xfff00000,
-	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S5P_PA_SDRAM + 0x100,
 	.init_irq	= s5pv210_init_irq,
 	.map_io		= smdkv210_map_io,
diff --git a/arch/arm/mach-s5pv310/cpu.c b/arch/arm/mach-s5pv310/cpu.c
index e5b261a99ab..4add39853ff 100644
--- a/arch/arm/mach-s5pv310/cpu.c
+++ b/arch/arm/mach-s5pv310/cpu.c
@@ -31,9 +31,14 @@ extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq);
 /* Initial IO mappings */
 static struct map_desc s5pv310_iodesc[] __initdata = {
 	{
-		.virtual	= (unsigned long)S5P_VA_COREPERI_BASE,
-		.pfn		= __phys_to_pfn(S5PV310_PA_COREPERI),
-		.length		= SZ_8K,
+		.virtual	= (unsigned long)S5P_VA_SYSRAM,
+		.pfn		= __phys_to_pfn(S5PV310_PA_SYSRAM),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_CMU,
+		.pfn		= __phys_to_pfn(S5PV310_PA_CMU),
+		.length		= SZ_128K,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= (unsigned long)S5P_VA_COMBINER_BASE,
@@ -41,19 +46,24 @@ static struct map_desc s5pv310_iodesc[] __initdata = {
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
 	}, {
+		.virtual	= (unsigned long)S5P_VA_COREPERI_BASE,
+		.pfn		= __phys_to_pfn(S5PV310_PA_COREPERI),
+		.length		= SZ_8K,
+		.type		= MT_DEVICE,
+	}, {
 		.virtual	= (unsigned long)S5P_VA_L2CC,
 		.pfn		= __phys_to_pfn(S5PV310_PA_L2CC),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= (unsigned long)S5P_VA_SYSRAM,
-		.pfn		= __phys_to_pfn(S5PV310_PA_SYSRAM),
+		.virtual	= (unsigned long)S5P_VA_GPIO,
+		.pfn		= __phys_to_pfn(S5PV310_PA_GPIO1),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= (unsigned long)S5P_VA_CMU,
-		.pfn		= __phys_to_pfn(S5PV310_PA_CMU),
-		.length		= SZ_128K,
+		.virtual	= (unsigned long)S3C_VA_UART,
+		.pfn		= __phys_to_pfn(S3C_PA_UART),
+		.length		= SZ_512K,
 		.type		= MT_DEVICE,
 	},
 };
diff --git a/arch/arm/mach-s5pv310/include/mach/debug-macro.S b/arch/arm/mach-s5pv310/include/mach/debug-macro.S
index 6fb3893486b..b0d920c474d 100644
--- a/arch/arm/mach-s5pv310/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5pv310/include/mach/debug-macro.S
@@ -20,13 +20,12 @@
 	 * aligned and add in the offset when we load the value here.
 	 */
 
-	.macro addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1
-		ldreq	\rx, = S3C_PA_UART
-		ldrne	\rx, = S3C_VA_UART
+	.macro addruart, rp, rv
+		ldreq	\rp, = S3C_PA_UART
+		ldrne	\rv, = S3C_VA_UART
 #if CONFIG_DEBUG_S3C_UART != 0
-		add	\rx, \rx, #(0x10000 * CONFIG_DEBUG_S3C_UART)
+		add	\rp, \rp, #(0x10000 * CONFIG_DEBUG_S3C_UART)
+		add	\rv, \rv, #(0x10000 * CONFIG_DEBUG_S3C_UART)
 #endif
 	.endm
 
diff --git a/arch/arm/mach-s5pv310/include/mach/irqs.h b/arch/arm/mach-s5pv310/include/mach/irqs.h
index 4cdedda6e65..471fc3bb199 100644
--- a/arch/arm/mach-s5pv310/include/mach/irqs.h
+++ b/arch/arm/mach-s5pv310/include/mach/irqs.h
@@ -68,6 +68,8 @@
 
 #define IRQ_IIC			COMBINER_IRQ(27, 0)
 
+#define IRQ_ONENAND_AUDI	COMBINER_IRQ(34, 0)
+
 /* Set the default NR_IRQS */
 
 #define NR_IRQS			COMBINER_IRQ(MAX_COMBINER_NR, 0)
diff --git a/arch/arm/mach-s5pv310/include/mach/map.h b/arch/arm/mach-s5pv310/include/mach/map.h
index 213e1101a3b..aff6d23624b 100644
--- a/arch/arm/mach-s5pv310/include/mach/map.h
+++ b/arch/arm/mach-s5pv310/include/mach/map.h
@@ -25,6 +25,12 @@
 
 #define S5PV310_PA_SYSRAM		(0x02025000)
 
+#define S5PC210_PA_ONENAND		(0x0C000000)
+#define S5P_PA_ONENAND			S5PC210_PA_ONENAND
+
+#define S5PC210_PA_ONENAND_DMA		(0x0C600000)
+#define S5P_PA_ONENAND_DMA		S5PC210_PA_ONENAND_DMA
+
 #define S5PV310_PA_CHIPID		(0x10000000)
 #define S5P_PA_CHIPID			S5PV310_PA_CHIPID
 
@@ -46,7 +52,6 @@
 #define S5PV310_PA_GPIO1		(0x11400000)
 #define S5PV310_PA_GPIO2		(0x11000000)
 #define S5PV310_PA_GPIO3		(0x03860000)
-#define S5P_PA_GPIO			S5PV310_PA_GPIO1
 
 #define S5PV310_PA_HSMMC(x)		(0x12510000 + ((x) * 0x10000))
 
diff --git a/arch/arm/mach-s5pv310/include/mach/smp.h b/arch/arm/mach-s5pv310/include/mach/smp.h
index 990f3ba88a1..b7ec252384f 100644
--- a/arch/arm/mach-s5pv310/include/mach/smp.h
+++ b/arch/arm/mach-s5pv310/include/mach/smp.h
@@ -7,17 +7,10 @@
 #define ASM_ARCH_SMP_H __FILE__
 
 #include <asm/hardware/gic.h>
+#include <asm/smp_mpidr.h>
 
 extern void __iomem *gic_cpu_base_addr;
 
-#define hard_smp_processor_id()			\
-	({						\
-		unsigned int cpunum;			\
-		__asm__("mrc p15, 0, %0, c0, c0, 5"	\
-			: "=r" (cpunum));		\
-		cpunum &= 0x03;				\
-	})
-
 /*
  * We use IRQ1 as the IPI
  */
diff --git a/arch/arm/mach-s5pv310/mach-smdkv310.c b/arch/arm/mach-s5pv310/mach-smdkv310.c
index 0d6ab77709d..46215a14b3b 100644
--- a/arch/arm/mach-s5pv310/mach-smdkv310.c
+++ b/arch/arm/mach-s5pv310/mach-smdkv310.c
@@ -82,8 +82,6 @@ static void __init smdkv310_machine_init(void)
 MACHINE_START(SMDKV310, "SMDKV310")
 	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
 	/* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */
-	.phys_io	= S3C_PA_UART & 0xfff00000,
-	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S5P_PA_SDRAM + 0x100,
 	.init_irq	= s5pv310_init_irq,
 	.map_io		= smdkv310_map_io,
diff --git a/arch/arm/mach-s5pv310/mach-universal_c210.c b/arch/arm/mach-s5pv310/mach-universal_c210.c
index 2388cb94793..d7c2ec770f8 100644
--- a/arch/arm/mach-s5pv310/mach-universal_c210.c
+++ b/arch/arm/mach-s5pv310/mach-universal_c210.c
@@ -76,8 +76,6 @@ static void __init universal_machine_init(void)
 
 MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
 	/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
-	.phys_io	= S3C_PA_UART & 0xfff00000,
-	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S5P_PA_SDRAM + 0x100,
 	.init_irq	= s5pv310_init_irq,
 	.map_io		= universal_map_io,
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index 169e5b87dbf..5778274a826 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -447,8 +447,6 @@ static void __init assabet_map_io(void)
 
 
 MACHINE_START(ASSABET, "Intel-Assabet")
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xf8000000) >> 18) & 0xfffc,
 	.boot_params	= 0xc0000100,
 	.fixup		= fixup_assabet,
 	.map_io		= assabet_map_io,
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index 259cb2c15ff..4f19ff868b0 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -302,8 +302,6 @@ static void __init badge4_map_io(void)
 }
 
 MACHINE_START(BADGE4, "Hewlett-Packard Laboratories BadgePAD 4")
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xf8000000) >> 18) & 0xfffc,
 	.boot_params	= 0xc0000100,
 	.map_io		= badge4_map_io,
 	.init_irq	= sa1100_init_irq,
diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c
index bc950ef418a..98d780608c7 100644
--- a/arch/arm/mach-sa1100/cerf.c
+++ b/arch/arm/mach-sa1100/cerf.c
@@ -135,8 +135,6 @@ static void __init cerf_init(void)
 
 MACHINE_START(CERF, "Intrinsyc CerfBoard/CerfCube")
 	/* Maintainer: support@intrinsyc.com */
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xf8000000) >> 18) & 0xfffc,
 	.map_io		= cerf_map_io,
 	.init_irq	= cerf_init_irq,
 	.timer		= &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index 16e682d5dbb..d43c5ef58eb 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -379,8 +379,6 @@ static void __init collie_map_io(void)
 }
 
 MACHINE_START(COLLIE, "Sharp-Collie")
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xf8000000) >> 18) & 0xfffc,
 	.map_io		= collie_map_io,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c
index 0c7cea0dc01..03d7376cf8a 100644
--- a/arch/arm/mach-sa1100/h3100.c
+++ b/arch/arm/mach-sa1100/h3100.c
@@ -84,8 +84,6 @@ static void __init h3100_mach_init(void)
 }
 
 MACHINE_START(H3100, "Compaq iPAQ H3100")
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xf8000000) >> 18) & 0xfffc,
 	.boot_params	= 0xc0000100,
 	.map_io		= h3100_map_io,
 	.init_irq	= sa1100_init_irq,
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index af3b71459f8..965f64a836f 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -125,8 +125,6 @@ static void __init h3600_mach_init(void)
 }
 
 MACHINE_START(H3600, "Compaq iPAQ H3600")
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xf8000000) >> 18) & 0xfffc,
 	.boot_params	= 0xc0000100,
 	.map_io		= h3600_map_io,
 	.init_irq	= sa1100_init_irq,
diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
index 51568dfc8e9..db5e434a17d 100644
--- a/arch/arm/mach-sa1100/hackkit.c
+++ b/arch/arm/mach-sa1100/hackkit.c
@@ -195,8 +195,6 @@ static void __init hackkit_init(void)
  */
 
 MACHINE_START(HACKKIT, "HackKit Cpu Board")
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xf8000000) >> 18) & 0xfffc,
 	.boot_params	= 0xc0000100,
 	.map_io		= hackkit_map_io,
 	.init_irq	= sa1100_init_irq,
diff --git a/arch/arm/mach-sa1100/include/mach/debug-macro.S b/arch/arm/mach-sa1100/include/mach/debug-macro.S
index 336adccea54..0cd0fc9635b 100644
--- a/arch/arm/mach-sa1100/include/mach/debug-macro.S
+++ b/arch/arm/mach-sa1100/include/mach/debug-macro.S
@@ -12,33 +12,37 @@
 */
 #include <mach/hardware.h>
 
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x80000000	@ physical base address
-		movne	\rx, #0xf8000000	@ virtual address
+		.macro	addruart, rp, rv
+		mrc	p15, 0, \rp, c1, c0
+		tst	\rp, #1			@ MMU enabled?
+		moveq	\rp, #0x80000000	@ physical base address
+		movne	\rp, #0xf8000000	@ virtual address
 
 		@ We probe for the active serial port here, coherently with
 		@ the comment in arch/arm/mach-sa1100/include/mach/uncompress.h.
 		@ We assume r1 can be clobbered.
 
 		@ see if Ser3 is active
-		add	\rx, \rx, #0x00050000
-		ldr	r1, [\rx, #UTCR3]
-		tst	r1, #UTCR3_TXE
+		add	\rp, \rp, #0x00050000
+		ldr	\rv, [\rp, #UTCR3]
+		tst	\rv, #UTCR3_TXE
 
 		@ if Ser3 is inactive, then try Ser1
-		addeq	\rx, \rx, #(0x00010000 - 0x00050000)
-		ldreq	r1, [\rx, #UTCR3]
-		tsteq	r1, #UTCR3_TXE
+		addeq	\rp, \rp, #(0x00010000 - 0x00050000)
+		ldreq	\rv, [\rp, #UTCR3]
+		tsteq	\rv, #UTCR3_TXE
 
 		@ if Ser1 is inactive, then try Ser2
-		addeq	\rx, \rx, #(0x00030000 - 0x00010000)
-		ldreq	r1, [\rx, #UTCR3]
-		tsteq	r1, #UTCR3_TXE
+		addeq	\rp, \rp, #(0x00030000 - 0x00010000)
+		ldreq	\rv, [\rp, #UTCR3]
+		tsteq	\rv, #UTCR3_TXE
+
+		@ clear top bits, and generate both phys and virt addresses
+		lsl	\rp, \rp, #8
+		lsr	\rp, \rp, #8
+		orr	\rv, \rp, #0xf8000000	@ virtual
+		orr	\rp, \rp, #0x80000000	@ physical
 
-		@ if all ports are inactive, then there is nothing we can do
-		moveq	pc, lr
 		.endm
 
 		.macro	senduart,rd,rx
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index d3ec620618f..491ac9f20fb 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -364,8 +364,6 @@ static void __init jornada720_mach_init(void)
 
 MACHINE_START(JORNADA720, "HP Jornada 720")
 	/* Maintainer: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> */
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xf8000000) >> 18) & 0xfffc,
 	.boot_params	= 0xc0000100,
 	.map_io		= jornada720_map_io,
 	.init_irq	= sa1100_init_irq,
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index 68069d6dc07..7b9556b5905 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -61,8 +61,6 @@ static void __init lart_map_io(void)
 }
 
 MACHINE_START(LART, "LART")
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xf8000000) >> 18) & 0xfffc,
 	.boot_params	= 0xc0000100,
 	.map_io		= lart_map_io,
 	.init_irq	= sa1100_init_irq,
diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c
index 1ccd6018d3a..42b80400c10 100644
--- a/arch/arm/mach-sa1100/pleb.c
+++ b/arch/arm/mach-sa1100/pleb.c
@@ -146,8 +146,6 @@ static void __init pleb_map_io(void)
 }
 
 MACHINE_START(PLEB, "PLEB")
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xf8000000) >> 18) & 0xfffc,
 	.map_io		= pleb_map_io,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
index 85e82bb73d7..7917b240557 100644
--- a/arch/arm/mach-sa1100/shannon.c
+++ b/arch/arm/mach-sa1100/shannon.c
@@ -82,8 +82,6 @@ static void __init shannon_map_io(void)
 }
 
 MACHINE_START(SHANNON, "Shannon (AKA: Tuxscreen)")
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xf8000000) >> 18) & 0xfffc,
 	.boot_params	= 0xc0000100,
 	.map_io		= shannon_map_io,
 	.init_irq	= sa1100_init_irq,
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index 49cfd64663a..27692d0ffbe 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -228,8 +228,6 @@ arch_initcall(simpad_init);
 
 MACHINE_START(SIMPAD, "Simpad")
 	/* Maintainer: Holger Freyther */
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xf8000000) >> 18) & 0xfffc,
 	.boot_params	= 0xc0000100,
 	.map_io		= simpad_map_io,
 	.init_irq	= sa1100_init_irq,
diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c
index 358d875ace1..5cf7f94c1f3 100644
--- a/arch/arm/mach-shark/core.c
+++ b/arch/arm/mach-shark/core.c
@@ -152,8 +152,6 @@ static struct sys_timer shark_timer = {
 
 MACHINE_START(SHARK, "Shark")
 	/* Maintainer: Alexander Schulz */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= ((0xe0000000) >> 18) & 0xfffc,
 	.boot_params	= 0x08003000,
 	.map_io		= shark_map_io,
 	.init_irq	= shark_init_irq,
diff --git a/arch/arm/mach-shark/include/mach/debug-macro.S b/arch/arm/mach-shark/include/mach/debug-macro.S
index 5ea24d4d1ba..a473f55dc71 100644
--- a/arch/arm/mach-shark/include/mach/debug-macro.S
+++ b/arch/arm/mach-shark/include/mach/debug-macro.S
@@ -11,9 +11,10 @@
  *
 */
 
-		.macro	addruart, rx, tmp
-		mov	\rx, #0xe0000000
-		orr	\rx, \rx, #0x000003f8
+		.macro	addruart, rp, rv
+		mov	\rp, #0xe0000000
+		orr	\rp, \rp, #0x000003f8
+		mov	\rv, \rp
 		.endm
 
 		.macro	senduart,rd,rx
diff --git a/arch/arm/mach-shark/include/mach/vmalloc.h b/arch/arm/mach-shark/include/mach/vmalloc.h
index f6c6837c545..8e845b6a7cb 100644
--- a/arch/arm/mach-shark/include/mach/vmalloc.h
+++ b/arch/arm/mach-shark/include/mach/vmalloc.h
@@ -1,4 +1,4 @@
 /*
  * arch/arm/mach-shark/include/mach/vmalloc.h
  */
-#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
+#define VMALLOC_END       0xd0000000
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 95935c83c30..14923989ea0 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -1105,8 +1105,6 @@ static struct sys_timer ap4evb_timer = {
 };
 
 MACHINE_START(AP4EVB, "ap4evb")
-	.phys_io	= 0xe6000000,
-	.io_pg_offst	= ((0xe6000000) >> 18) & 0xfffc,
 	.map_io		= ap4evb_map_io,
 	.init_irq	= sh7372_init_irq,
 	.init_machine	= ap4evb_init,
diff --git a/arch/arm/mach-shmobile/board-g3evm.c b/arch/arm/mach-shmobile/board-g3evm.c
index a5525901e91..3b83d6320be 100644
--- a/arch/arm/mach-shmobile/board-g3evm.c
+++ b/arch/arm/mach-shmobile/board-g3evm.c
@@ -365,8 +365,6 @@ static struct sys_timer g3evm_timer = {
 };
 
 MACHINE_START(G3EVM, "g3evm")
-	.phys_io	= 0xe6000000,
-	.io_pg_offst	= ((0xe6000000) >> 18) & 0xfffc,
 	.map_io		= g3evm_map_io,
 	.init_irq	= sh7367_init_irq,
 	.init_machine	= g3evm_init,
diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c
index 2c3ff6f7f34..5b3b582ef3f 100644
--- a/arch/arm/mach-shmobile/board-g4evm.c
+++ b/arch/arm/mach-shmobile/board-g4evm.c
@@ -392,8 +392,6 @@ static struct sys_timer g4evm_timer = {
 };
 
 MACHINE_START(G4EVM, "g4evm")
-	.phys_io	= 0xe6000000,
-	.io_pg_offst	= ((0xe6000000) >> 18) & 0xfffc,
 	.map_io		= g4evm_map_io,
 	.init_irq	= sh7377_init_irq,
 	.init_machine	= g4evm_init,
diff --git a/arch/arm/mach-stmp378x/stmp378x_devb.c b/arch/arm/mach-stmp378x/stmp378x_devb.c
index 90d8fe6f10f..06158848afd 100644
--- a/arch/arm/mach-stmp378x/stmp378x_devb.c
+++ b/arch/arm/mach-stmp378x/stmp378x_devb.c
@@ -324,8 +324,6 @@ static void __init stmp378x_devb_init(void)
 }
 
 MACHINE_START(STMP378X, "STMP378X")
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xf0000000) >> 18) & 0xfffc,
 	.boot_params	= 0x40000100,
 	.map_io		= stmp378x_map_io,
 	.init_irq	= stmp378x_init_irq,
diff --git a/arch/arm/mach-stmp37xx/stmp37xx_devb.c b/arch/arm/mach-stmp37xx/stmp37xx_devb.c
index 394f21ab59e..311d8552d36 100644
--- a/arch/arm/mach-stmp37xx/stmp37xx_devb.c
+++ b/arch/arm/mach-stmp37xx/stmp37xx_devb.c
@@ -91,8 +91,6 @@ static void __init stmp37xx_devb_init(void)
 }
 
 MACHINE_START(STMP37XX, "STMP37XX")
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xf0000000) >> 18) & 0xfffc,
 	.boot_params	= 0x40000100,
 	.map_io		= stmp37xx_map_io,
 	.init_irq	= stmp37xx_init_irq,
diff --git a/arch/arm/mach-tcc8k/Kconfig b/arch/arm/mach-tcc8k/Kconfig
new file mode 100644
index 00000000000..ad86415d157
--- /dev/null
+++ b/arch/arm/mach-tcc8k/Kconfig
@@ -0,0 +1,11 @@
+if ARCH_TCC8K
+
+comment "TCC8000 systems:"
+
+config MACH_TCC8000_SDK
+	bool "Telechips TCC8000-SDK development kit"
+	default y
+	help
+	  Support for the Telechips TCC8000-SDK board.
+
+endif
diff --git a/arch/arm/mach-tcc8k/Makefile b/arch/arm/mach-tcc8k/Makefile
new file mode 100644
index 00000000000..9bacf31e49b
--- /dev/null
+++ b/arch/arm/mach-tcc8k/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for TCC8K boards and common files.
+#
+
+# Common support
+obj-y += clock.o irq.o time.o io.o devices.o
+
+# Board specific support
+obj-$(CONFIG_MACH_TCC8000_SDK) += board-tcc8000-sdk.o
diff --git a/arch/arm/mach-tcc8k/Makefile.boot b/arch/arm/mach-tcc8k/Makefile.boot
new file mode 100644
index 00000000000..f135c9deae1
--- /dev/null
+++ b/arch/arm/mach-tcc8k/Makefile.boot
@@ -0,0 +1,3 @@
+   zreladdr-y		:= 0x20008000
+params_phys-y		:= 0x20000100
+initrd_phys-y		:= 0x20800000
diff --git a/arch/arm/mach-tcc8k/board-tcc8000-sdk.c b/arch/arm/mach-tcc8k/board-tcc8000-sdk.c
new file mode 100644
index 00000000000..7991415e666
--- /dev/null
+++ b/arch/arm/mach-tcc8k/board-tcc8000-sdk.c
@@ -0,0 +1,62 @@
+/*
+ * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+
+#include <mach/clock.h>
+
+#include "common.h"
+
+#define XI_FREQUENCY	12000000
+#define XTI_FREQUENCY	32768
+
+#ifdef CONFIG_MTD_NAND_TCC
+/* NAND */
+static struct tcc_nand_platform_data tcc8k_sdk_nand_data = {
+	.width = 1,
+	.hw_ecc = 0,
+};
+#endif
+
+static void __init tcc8k_init(void)
+{
+#ifdef CONFIG_MTD_NAND_TCC
+	tcc_nand_device.dev.platform_data = &tcc8k_sdk_nand_data;
+	platform_device_register(&tcc_nand_device);
+#endif
+}
+
+static void __init tcc8k_init_timer(void)
+{
+	tcc_clocks_init(XI_FREQUENCY, XTI_FREQUENCY);
+}
+
+static struct sys_timer tcc8k_timer = {
+	.init	= tcc8k_init_timer,
+};
+
+static void __init tcc8k_map_io(void)
+{
+	tcc8k_map_common_io();
+}
+
+MACHINE_START(TCC8000_SDK, "Telechips TCC8000-SDK Demo Board")
+	.boot_params	= PHYS_OFFSET + 0x00000100,
+	.map_io		= tcc8k_map_io,
+	.init_irq	= tcc8k_init_irq,
+	.init_machine	= tcc8k_init,
+	.timer		= &tcc8k_timer,
+MACHINE_END
diff --git a/arch/arm/mach-tcc8k/clock.c b/arch/arm/mach-tcc8k/clock.c
new file mode 100644
index 00000000000..ba32a15127a
--- /dev/null
+++ b/arch/arm/mach-tcc8k/clock.c
@@ -0,0 +1,567 @@
+/*
+ * Lowlevel clock handling for Telechips TCC8xxx SoCs
+ *
+ * Copyright (C) 2010 by Hans J. Koch <hjk@linutronix.de>
+ *
+ * Licensed under the terms of the GPL v2
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+
+#include <asm/clkdev.h>
+
+#include <mach/clock.h>
+#include <mach/irqs.h>
+#include <mach/tcc8k-regs.h>
+
+#include "common.h"
+
+#define BCLKCTR0	(CKC_BASE + BCLKCTR0_OFFS)
+#define BCLKCTR1	(CKC_BASE + BCLKCTR1_OFFS)
+
+#define ACLKREF		(CKC_BASE + ACLKREF_OFFS)
+#define ACLKUART0	(CKC_BASE + ACLKUART0_OFFS)
+#define ACLKUART1	(CKC_BASE + ACLKUART1_OFFS)
+#define ACLKUART2	(CKC_BASE + ACLKUART2_OFFS)
+#define ACLKUART3	(CKC_BASE + ACLKUART3_OFFS)
+#define ACLKUART4	(CKC_BASE + ACLKUART4_OFFS)
+#define ACLKI2C		(CKC_BASE + ACLKI2C_OFFS)
+#define ACLKADC		(CKC_BASE + ACLKADC_OFFS)
+#define ACLKUSBH	(CKC_BASE + ACLKUSBH_OFFS)
+#define ACLKLCD		(CKC_BASE + ACLKLCD_OFFS)
+#define ACLKSDH0	(CKC_BASE + ACLKSDH0_OFFS)
+#define ACLKSDH1	(CKC_BASE + ACLKSDH1_OFFS)
+#define ACLKSPI0	(CKC_BASE + ACLKSPI0_OFFS)
+#define ACLKSPI1	(CKC_BASE + ACLKSPI1_OFFS)
+#define ACLKSPDIF	(CKC_BASE + ACLKSPDIF_OFFS)
+#define ACLKC3DEC	(CKC_BASE + ACLKC3DEC_OFFS)
+#define ACLKCAN0	(CKC_BASE + ACLKCAN0_OFFS)
+#define ACLKCAN1	(CKC_BASE + ACLKCAN1_OFFS)
+#define ACLKGSB0	(CKC_BASE + ACLKGSB0_OFFS)
+#define ACLKGSB1	(CKC_BASE + ACLKGSB1_OFFS)
+#define ACLKGSB2	(CKC_BASE + ACLKGSB2_OFFS)
+#define ACLKGSB3	(CKC_BASE + ACLKGSB3_OFFS)
+#define ACLKUSBH	(CKC_BASE + ACLKUSBH_OFFS)
+#define ACLKTCT		(CKC_BASE + ACLKTCT_OFFS)
+#define ACLKTCX		(CKC_BASE + ACLKTCX_OFFS)
+#define ACLKTCZ		(CKC_BASE + ACLKTCZ_OFFS)
+
+/* Crystal frequencies */
+static unsigned long xi_rate, xti_rate;
+
+static void __iomem *pll_cfg_addr(int pll)
+{
+	switch (pll) {
+	case 0: return (CKC_BASE + PLL0CFG_OFFS);
+	case 1: return (CKC_BASE + PLL1CFG_OFFS);
+	case 2: return (CKC_BASE + PLL2CFG_OFFS);
+	default:
+		BUG();
+	}
+}
+
+static int pll_enable(int pll, int enable)
+{
+	u32 reg;
+	void __iomem *addr = pll_cfg_addr(pll);
+
+	reg = __raw_readl(addr);
+	if (enable)
+		reg &= ~PLLxCFG_PD;
+	else
+		reg |= PLLxCFG_PD;
+
+	__raw_writel(reg, addr);
+	return 0;
+}
+
+static int xi_enable(int enable)
+{
+	u32 reg;
+
+	reg = __raw_readl(CKC_BASE + CLKCTRL_OFFS);
+	if (enable)
+		reg |= CLKCTRL_XE;
+	else
+		reg &= ~CLKCTRL_XE;
+
+	__raw_writel(reg, CKC_BASE + CLKCTRL_OFFS);
+	return 0;
+}
+
+static int root_clk_enable(enum root_clks src)
+{
+	switch (src) {
+	case CLK_SRC_PLL0: return pll_enable(0, 1);
+	case CLK_SRC_PLL1: return pll_enable(1, 1);
+	case CLK_SRC_PLL2: return pll_enable(2, 1);
+	case CLK_SRC_XI: return xi_enable(1);
+	default:
+		BUG();
+	}
+	return 0;
+}
+
+static int root_clk_disable(enum root_clks root_src)
+{
+	switch (root_src) {
+	case CLK_SRC_PLL0: return pll_enable(0, 0);
+	case CLK_SRC_PLL1: return pll_enable(1, 0);
+	case CLK_SRC_PLL2: return pll_enable(2, 0);
+	case CLK_SRC_XI: return xi_enable(0);
+	default:
+		BUG();
+	}
+	return 0;
+}
+
+static int enable_clk(struct clk *clk)
+{
+	u32 reg;
+
+	if (clk->root_id != CLK_SRC_NOROOT)
+		return root_clk_enable(clk->root_id);
+
+	if (clk->aclkreg) {
+		reg = __raw_readl(clk->aclkreg);
+		reg |= ACLK_EN;
+		__raw_writel(reg, clk->aclkreg);
+	}
+	if (clk->bclkctr) {
+		reg = __raw_readl(clk->bclkctr);
+		reg |= 1 << clk->bclk_shift;
+		__raw_writel(reg, clk->bclkctr);
+	}
+	return 0;
+}
+
+static void disable_clk(struct clk *clk)
+{
+	u32 reg;
+
+	if (clk->root_id != CLK_SRC_NOROOT) {
+		root_clk_disable(clk->root_id);
+		return;
+	}
+
+	if (clk->bclkctr) {
+		reg = __raw_readl(clk->bclkctr);
+		reg &= ~(1 << clk->bclk_shift);
+		__raw_writel(reg, clk->bclkctr);
+	}
+	if (clk->aclkreg) {
+		reg = __raw_readl(clk->aclkreg);
+		reg &= ~ACLK_EN;
+		__raw_writel(reg, clk->aclkreg);
+	}
+}
+
+static unsigned long get_rate_pll(int pll)
+{
+	u32 reg;
+	unsigned long s, m, p;
+	void __iomem *addr = pll_cfg_addr(pll);
+
+	reg = __raw_readl(addr);
+	s = (reg >> 16) & 0x07;
+	m = (reg >> 8) & 0xff;
+	p = reg & 0x3f;
+
+	return (m * xi_rate) / (p * (1 << s));
+}
+
+static unsigned long get_rate_pll_div(int pll)
+{
+	u32 reg;
+	unsigned long div = 0;
+	void __iomem *addr;
+
+	switch (pll) {
+	case 0:
+		addr = CKC_BASE + CLKDIVC0_OFFS;
+		reg = __raw_readl(addr);
+		if (reg & CLKDIVC0_P0E)
+			div = (reg >> 24) & 0x3f;
+		break;
+	case 1:
+		addr = CKC_BASE + CLKDIVC0_OFFS;
+		reg = __raw_readl(addr);
+		if (reg & CLKDIVC0_P1E)
+			div = (reg >> 16) & 0x3f;
+		break;
+	case 2:
+		addr = CKC_BASE + CLKDIVC1_OFFS;
+		reg = __raw_readl(addr);
+		if (reg & CLKDIVC1_P2E)
+			div = __raw_readl(addr) & 0x3f;
+		break;
+	}
+	return get_rate_pll(pll) / (div + 1);
+}
+
+static unsigned long get_rate_xi_div(void)
+{
+	unsigned long div = 0;
+	u32 reg = __raw_readl(CKC_BASE + CLKDIVC0_OFFS);
+
+	if (reg & CLKDIVC0_XE)
+		div = (reg >> 8) & 0x3f;
+
+	return xi_rate / (div + 1);
+}
+
+static unsigned long get_rate_xti_div(void)
+{
+	unsigned long div = 0;
+	u32 reg = __raw_readl(CKC_BASE + CLKDIVC0_OFFS);
+
+	if (reg & CLKDIVC0_XTE)
+		div = reg & 0x3f;
+
+	return xti_rate / (div + 1);
+}
+
+static unsigned long root_clk_get_rate(enum root_clks src)
+{
+	switch (src) {
+	case CLK_SRC_PLL0: return get_rate_pll(0);
+	case CLK_SRC_PLL1: return get_rate_pll(1);
+	case CLK_SRC_PLL2: return get_rate_pll(2);
+	case CLK_SRC_PLL0DIV: return get_rate_pll_div(0);
+	case CLK_SRC_PLL1DIV: return get_rate_pll_div(1);
+	case CLK_SRC_PLL2DIV: return get_rate_pll_div(2);
+	case CLK_SRC_XI: return xi_rate;
+	case CLK_SRC_XTI: return xti_rate;
+	case CLK_SRC_XIDIV: return get_rate_xi_div();
+	case CLK_SRC_XTIDIV: return get_rate_xti_div();
+	default: return 0;
+	}
+}
+
+static unsigned long aclk_get_rate(struct clk *clk)
+{
+	u32 reg;
+	unsigned long div;
+	unsigned int src;
+
+	reg = __raw_readl(clk->aclkreg);
+	div = reg & 0x0fff;
+	src = (reg >> ACLK_SEL_SHIFT) & CLK_SRC_MASK;
+	return root_clk_get_rate(src) / (div + 1);
+}
+
+static unsigned long aclk_best_div(struct clk *clk, unsigned long rate)
+{
+	unsigned long div, src, freq, r1, r2;
+
+	src = __raw_readl(clk->aclkreg) >> ACLK_SEL_SHIFT;
+	src &= CLK_SRC_MASK;
+	freq = root_clk_get_rate(src);
+	div = freq / rate + 1;
+	r1 = freq / div;
+	r2 = freq / (div + 1);
+	if (r2 >= rate)
+		return div + 1;
+	if ((rate - r2) < (r1 - rate))
+		return div + 1;
+
+	return div;
+}
+
+static unsigned long aclk_round_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned int src;
+
+	src = __raw_readl(clk->aclkreg) >> ACLK_SEL_SHIFT;
+	src &= CLK_SRC_MASK;
+
+	return root_clk_get_rate(src) / aclk_best_div(clk, rate);
+}
+
+static int aclk_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 reg;
+
+	reg = __raw_readl(clk->aclkreg) & ~ACLK_DIV_MASK;
+	reg |= aclk_best_div(clk, rate);
+	return 0;
+}
+
+static unsigned long get_rate_sys(struct clk *clk)
+{
+	unsigned int src;
+
+	src = __raw_readl(CKC_BASE + CLKCTRL_OFFS) & CLK_SRC_MASK;
+		return root_clk_get_rate(src);
+}
+
+static unsigned long get_rate_bus(struct clk *clk)
+{
+	unsigned int div;
+
+	div = (__raw_readl(CKC_BASE + CLKCTRL_OFFS) >> 4) & 0xff;
+	return get_rate_sys(clk) / (div + 1);
+}
+
+static unsigned long get_rate_cpu(struct clk *clk)
+{
+	unsigned int reg, div, fsys, fbus;
+
+	fbus = get_rate_bus(clk);
+	reg = __raw_readl(CKC_BASE + CLKCTRL_OFFS);
+	if (reg & (1 << 29))
+		return fbus;
+	fsys = get_rate_sys(clk);
+	div = (reg >> 16) & 0x0f;
+	return fbus + ((fsys - fbus) * (div + 1)) / 16;
+}
+
+static unsigned long get_rate_root(struct clk *clk)
+{
+	return root_clk_get_rate(clk->root_id);
+}
+
+static int aclk_set_parent(struct clk *clock, struct clk *parent)
+{
+	u32 reg;
+
+	if (clock->parent == parent)
+		return 0;
+
+	clock->parent = parent;
+
+	if (!parent)
+		return 0;
+
+	if (parent->root_id == CLK_SRC_NOROOT)
+		return 0;
+	reg = __raw_readl(clock->aclkreg);
+	reg &= ~ACLK_SEL_MASK;
+	reg |= (parent->root_id << ACLK_SEL_SHIFT) & ACLK_SEL_MASK;
+	__raw_writel(reg, clock->aclkreg);
+
+	return 0;
+}
+
+#define DEFINE_ROOT_CLOCK(name, ri, p)	\
+	static struct clk name = {		\
+		.root_id = ri,			\
+		.get_rate = get_rate_root,			\
+		.enable = enable_clk,		\
+		.disable = disable_clk,		\
+		.parent = p,			\
+	};
+
+#define DEFINE_SPECIAL_CLOCK(name, gr, p)	\
+	static struct clk name = {		\
+		.root_id = CLK_SRC_NOROOT,	\
+		.get_rate = gr,			\
+		.parent = p,			\
+	};
+
+#define DEFINE_ACLOCK(name, bc, bs, ar)		\
+	static struct clk name = {		\
+		.root_id = CLK_SRC_NOROOT,	\
+		.bclkctr = bc,			\
+		.bclk_shift = bs,		\
+		.aclkreg = ar,			\
+		.get_rate = aclk_get_rate,	\
+		.set_rate = aclk_set_rate,	\
+		.round_rate = aclk_round_rate,	\
+		.enable = enable_clk,		\
+		.disable = disable_clk,		\
+		.set_parent = aclk_set_parent,	\
+	};
+
+#define DEFINE_BCLOCK(name, bc, bs, gr, p)	\
+	static struct clk name = {		\
+		.root_id = CLK_SRC_NOROOT,	\
+		.bclkctr = bc,			\
+		.bclk_shift = bs,		\
+		.get_rate = gr,			\
+		.enable = enable_clk,		\
+		.disable = disable_clk,		\
+		.parent = p,			\
+	};
+
+DEFINE_ROOT_CLOCK(xi, CLK_SRC_XI, NULL)
+DEFINE_ROOT_CLOCK(xti, CLK_SRC_XTI, NULL)
+DEFINE_ROOT_CLOCK(xidiv, CLK_SRC_XIDIV, &xi)
+DEFINE_ROOT_CLOCK(xtidiv, CLK_SRC_XTIDIV, &xti)
+DEFINE_ROOT_CLOCK(pll0, CLK_SRC_PLL0, &xi)
+DEFINE_ROOT_CLOCK(pll1, CLK_SRC_PLL1, &xi)
+DEFINE_ROOT_CLOCK(pll2, CLK_SRC_PLL2, &xi)
+DEFINE_ROOT_CLOCK(pll0div, CLK_SRC_PLL0DIV, &pll0)
+DEFINE_ROOT_CLOCK(pll1div, CLK_SRC_PLL1DIV, &pll1)
+DEFINE_ROOT_CLOCK(pll2div, CLK_SRC_PLL2DIV, &pll2)
+
+/* The following 3 clocks are special and are initialized explicitly later */
+DEFINE_SPECIAL_CLOCK(sys, get_rate_sys, NULL)
+DEFINE_SPECIAL_CLOCK(bus, get_rate_bus, &sys)
+DEFINE_SPECIAL_CLOCK(cpu, get_rate_cpu, &sys)
+
+DEFINE_ACLOCK(tct, NULL, 0, ACLKTCT)
+DEFINE_ACLOCK(tcx, NULL, 0, ACLKTCX)
+DEFINE_ACLOCK(tcz, NULL, 0, ACLKTCZ)
+DEFINE_ACLOCK(ref, NULL, 0, ACLKREF)
+DEFINE_ACLOCK(uart0, BCLKCTR0, 5, ACLKUART0)
+DEFINE_ACLOCK(uart1, BCLKCTR0, 23, ACLKUART1)
+DEFINE_ACLOCK(uart2, BCLKCTR0, 6, ACLKUART2)
+DEFINE_ACLOCK(uart3, BCLKCTR0, 8, ACLKUART3)
+DEFINE_ACLOCK(uart4, BCLKCTR1, 6, ACLKUART4)
+DEFINE_ACLOCK(i2c, BCLKCTR0, 7, ACLKI2C)
+DEFINE_ACLOCK(adc, BCLKCTR0, 10, ACLKADC)
+DEFINE_ACLOCK(usbh0, BCLKCTR0, 11, ACLKUSBH)
+DEFINE_ACLOCK(lcd, BCLKCTR0, 13, ACLKLCD)
+DEFINE_ACLOCK(sd0, BCLKCTR0, 17, ACLKSDH0)
+DEFINE_ACLOCK(sd1, BCLKCTR1, 5, ACLKSDH1)
+DEFINE_ACLOCK(spi0, BCLKCTR0, 24, ACLKSPI0)
+DEFINE_ACLOCK(spi1, BCLKCTR0, 30, ACLKSPI1)
+DEFINE_ACLOCK(spdif, BCLKCTR1, 2, ACLKSPDIF)
+DEFINE_ACLOCK(c3dec, BCLKCTR1, 9, ACLKC3DEC)
+DEFINE_ACLOCK(can0, BCLKCTR1, 10, ACLKCAN0)
+DEFINE_ACLOCK(can1, BCLKCTR1, 11, ACLKCAN1)
+DEFINE_ACLOCK(gsb0, BCLKCTR1, 13, ACLKGSB0)
+DEFINE_ACLOCK(gsb1, BCLKCTR1, 14, ACLKGSB1)
+DEFINE_ACLOCK(gsb2, BCLKCTR1, 15, ACLKGSB2)
+DEFINE_ACLOCK(gsb3, BCLKCTR1, 16, ACLKGSB3)
+DEFINE_ACLOCK(usbh1, BCLKCTR1, 20, ACLKUSBH)
+
+DEFINE_BCLOCK(dai0, BCLKCTR0, 0, NULL, NULL)
+DEFINE_BCLOCK(pic, BCLKCTR0, 1, NULL, NULL)
+DEFINE_BCLOCK(tc, BCLKCTR0, 2, NULL, NULL)
+DEFINE_BCLOCK(gpio, BCLKCTR0, 3, NULL, NULL)
+DEFINE_BCLOCK(usbd, BCLKCTR0, 4, NULL, NULL)
+DEFINE_BCLOCK(ecc, BCLKCTR0, 9, NULL, NULL)
+DEFINE_BCLOCK(gdma0, BCLKCTR0, 12, NULL, NULL)
+DEFINE_BCLOCK(rtc, BCLKCTR0, 15, NULL, NULL)
+DEFINE_BCLOCK(nfc, BCLKCTR0, 16, NULL, NULL)
+DEFINE_BCLOCK(g2d, BCLKCTR0, 18, NULL, NULL)
+DEFINE_BCLOCK(gdma1, BCLKCTR0, 22, NULL, NULL)
+DEFINE_BCLOCK(mscl, BCLKCTR0, 25, NULL, NULL)
+DEFINE_BCLOCK(bdma, BCLKCTR1, 0, NULL, NULL)
+DEFINE_BCLOCK(adma0, BCLKCTR1, 1, NULL, NULL)
+DEFINE_BCLOCK(scfg, BCLKCTR1, 3, NULL, NULL)
+DEFINE_BCLOCK(cid, BCLKCTR1, 4, NULL, NULL)
+DEFINE_BCLOCK(dai1, BCLKCTR1, 7, NULL, NULL)
+DEFINE_BCLOCK(adma1, BCLKCTR1, 8, NULL, NULL)
+DEFINE_BCLOCK(gps, BCLKCTR1, 12, NULL, NULL)
+DEFINE_BCLOCK(gdma2, BCLKCTR1, 17, NULL, NULL)
+DEFINE_BCLOCK(gdma3, BCLKCTR1, 18, NULL, NULL)
+DEFINE_BCLOCK(ddrc, BCLKCTR1, 19, NULL, NULL)
+
+#define _REGISTER_CLOCK(d, n, c) \
+	{ \
+		.dev_id = d, \
+		.con_id = n, \
+		.clk = &c, \
+	},
+
+static struct clk_lookup lookups[] = {
+	_REGISTER_CLOCK(NULL, "bus", bus)
+	_REGISTER_CLOCK(NULL, "cpu", cpu)
+	_REGISTER_CLOCK(NULL, "tct", tct)
+	_REGISTER_CLOCK(NULL, "tcx", tcx)
+	_REGISTER_CLOCK(NULL, "tcz", tcz)
+	_REGISTER_CLOCK(NULL, "ref", ref)
+	_REGISTER_CLOCK(NULL, "dai0", dai0)
+	_REGISTER_CLOCK(NULL, "pic", pic)
+	_REGISTER_CLOCK(NULL, "tc", tc)
+	_REGISTER_CLOCK(NULL, "gpio", gpio)
+	_REGISTER_CLOCK(NULL, "usbd", usbd)
+	_REGISTER_CLOCK("tcc-uart.0", NULL, uart0)
+	_REGISTER_CLOCK("tcc-uart.2", NULL, uart2)
+	_REGISTER_CLOCK("tcc-i2c", NULL, i2c)
+	_REGISTER_CLOCK("tcc-uart.3", NULL, uart3)
+	_REGISTER_CLOCK(NULL, "ecc", ecc)
+	_REGISTER_CLOCK(NULL, "adc", adc)
+	_REGISTER_CLOCK("tcc-usbh.0", "usb", usbh0)
+	_REGISTER_CLOCK(NULL, "gdma0", gdma0)
+	_REGISTER_CLOCK(NULL, "lcd", lcd)
+	_REGISTER_CLOCK(NULL, "rtc", rtc)
+	_REGISTER_CLOCK(NULL, "nfc", nfc)
+	_REGISTER_CLOCK("tcc-mmc.0", NULL, sd0)
+	_REGISTER_CLOCK(NULL, "g2d", g2d)
+	_REGISTER_CLOCK(NULL, "gdma1", gdma1)
+	_REGISTER_CLOCK("tcc-uart.1", NULL, uart1)
+	_REGISTER_CLOCK("tcc-spi.0", NULL, spi0)
+	_REGISTER_CLOCK(NULL, "mscl", mscl)
+	_REGISTER_CLOCK("tcc-spi.1", NULL, spi1)
+	_REGISTER_CLOCK(NULL, "bdma", bdma)
+	_REGISTER_CLOCK(NULL, "adma0", adma0)
+	_REGISTER_CLOCK(NULL, "spdif", spdif)
+	_REGISTER_CLOCK(NULL, "scfg", scfg)
+	_REGISTER_CLOCK(NULL, "cid", cid)
+	_REGISTER_CLOCK("tcc-mmc.1", NULL, sd1)
+	_REGISTER_CLOCK("tcc-uart.4", NULL, uart4)
+	_REGISTER_CLOCK(NULL, "dai1", dai1)
+	_REGISTER_CLOCK(NULL, "adma1", adma1)
+	_REGISTER_CLOCK(NULL, "c3dec", c3dec)
+	_REGISTER_CLOCK("tcc-can.0", NULL, can0)
+	_REGISTER_CLOCK("tcc-can.1", NULL, can1)
+	_REGISTER_CLOCK(NULL, "gps", gps)
+	_REGISTER_CLOCK("tcc-gsb.0", NULL, gsb0)
+	_REGISTER_CLOCK("tcc-gsb.1", NULL, gsb1)
+	_REGISTER_CLOCK("tcc-gsb.2", NULL, gsb2)
+	_REGISTER_CLOCK("tcc-gsb.3", NULL, gsb3)
+	_REGISTER_CLOCK(NULL, "gdma2", gdma2)
+	_REGISTER_CLOCK(NULL, "gdma3", gdma3)
+	_REGISTER_CLOCK(NULL, "ddrc", ddrc)
+	_REGISTER_CLOCK("tcc-usbh.1", "usb", usbh1)
+};
+
+static struct clk *root_clk_by_index(enum root_clks src)
+{
+	switch (src) {
+	case CLK_SRC_PLL0: return &pll0;
+	case CLK_SRC_PLL1: return &pll1;
+	case CLK_SRC_PLL2: return &pll2;
+	case CLK_SRC_PLL0DIV: return &pll0div;
+	case CLK_SRC_PLL1DIV: return &pll1div;
+	case CLK_SRC_PLL2DIV: return &pll2div;
+	case CLK_SRC_XI: return &xi;
+	case CLK_SRC_XTI: return &xti;
+	case CLK_SRC_XIDIV: return &xidiv;
+	case CLK_SRC_XTIDIV: return &xtidiv;
+	default: return NULL;
+	}
+}
+
+static void find_aclk_parent(struct clk *clk)
+{
+	unsigned int src;
+	struct clk *clock;
+
+	if (!clk->aclkreg)
+		return;
+
+	src = __raw_readl(clk->aclkreg) >> ACLK_SEL_SHIFT;
+	src &= CLK_SRC_MASK;
+
+	clock = root_clk_by_index(src);
+	if (!clock)
+		return;
+
+	clk->parent = clock;
+	clk->set_parent = aclk_set_parent;
+}
+
+void __init tcc_clocks_init(unsigned long xi_freq, unsigned long xti_freq)
+{
+	int i;
+
+	xi_rate = xi_freq;
+	xti_rate = xti_freq;
+
+	/* fixup parents and add the clock */
+	for (i = 0; i < ARRAY_SIZE(lookups); i++) {
+		find_aclk_parent(lookups[i].clk);
+		clkdev_add(&lookups[i]);
+	}
+	tcc8k_timer_init(&tcz, (void __iomem *)TIMER_BASE, INT_TC32);
+}
diff --git a/arch/arm/mach-tcc8k/common.h b/arch/arm/mach-tcc8k/common.h
new file mode 100644
index 00000000000..705690add39
--- /dev/null
+++ b/arch/arm/mach-tcc8k/common.h
@@ -0,0 +1,15 @@
+#ifndef MACH_TCC8K_COMMON_H
+#define MACH_TCC8K_COMMON_H
+
+#include <linux/platform_device.h>
+
+extern struct platform_device tcc_nand_device;
+
+struct clk;
+
+extern void tcc_clocks_init(unsigned long xi_freq, unsigned long xti_freq);
+extern void tcc8k_timer_init(struct clk *clock, void __iomem *base, int irq);
+extern void tcc8k_init_irq(void);
+extern void tcc8k_map_common_io(void);
+
+#endif
diff --git a/arch/arm/mach-tcc8k/devices.c b/arch/arm/mach-tcc8k/devices.c
new file mode 100644
index 00000000000..6722ad7c283
--- /dev/null
+++ b/arch/arm/mach-tcc8k/devices.c
@@ -0,0 +1,239 @@
+/*
+ * linux/arch/arm/mach-tcc8k/devices.c
+ *
+ * Copyright (C) Telechips, Inc.
+ * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de>
+ *
+ * Licensed under the terms of GPL v2.
+ *
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/tcc8k-regs.h>
+#include <mach/irqs.h>
+
+#include "common.h"
+
+static u64 tcc8k_dmamask = DMA_BIT_MASK(32);
+
+#ifdef CONFIG_MTD_NAND_TCC
+/* NAND controller */
+static struct resource tcc_nand_resources[] = {
+	{
+		.start	= (resource_size_t)NFC_BASE,
+		.end	= (resource_size_t)NFC_BASE + 0x7f,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= INT_NFC,
+		.end	= INT_NFC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device tcc_nand_device = {
+	.name = "tcc_nand",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(tcc_nand_resources),
+	.resource = tcc_nand_resources,
+};
+#endif
+
+#ifdef CONFIG_MMC_TCC8K
+/* MMC controller */
+static struct resource tcc8k_mmc0_resource[] = {
+	{
+		.start = INT_SD0,
+		.end   = INT_SD0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource tcc8k_mmc1_resource[] = {
+	{
+		.start = INT_SD1,
+		.end   = INT_SD1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device tcc8k_mmc0_device = {
+	.name		= "tcc-mmc",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(tcc8k_mmc0_resource),
+	.resource	= tcc8k_mmc0_resource,
+	.dev		= {
+		.dma_mask		= &tcc8k_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	}
+};
+
+struct platform_device tcc8k_mmc1_device = {
+	.name		= "tcc-mmc",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(tcc8k_mmc1_resource),
+	.resource	= tcc8k_mmc1_resource,
+	.dev		= {
+		.dma_mask		= &tcc8k_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	}
+};
+
+static inline void tcc8k_init_mmc(void)
+{
+	u32 reg = __raw_readl(GPIOPS_BASE + GPIOPS_FS1_OFFS);
+
+	reg |= GPIOPS_FS1_SDH0_BITS | GPIOPS_FS1_SDH1_BITS;
+	__raw_writel(reg, GPIOPS_BASE + GPIOPS_FS1_OFFS);
+
+	platform_device_register(&tcc8k_mmc0_device);
+	platform_device_register(&tcc8k_mmc1_device);
+}
+#else
+static inline void tcc8k_init_mmc(void) { }
+#endif
+
+#ifdef CONFIG_USB_OHCI_HCD
+static int tcc8k_ohci_init(struct device *dev)
+{
+	u32 reg;
+
+	/* Use GPIO PK19 as VBUS control output */
+	reg = __raw_readl(GPIOPK_BASE + GPIOPK_FS0_OFFS);
+	reg &= ~(1 << 19);
+	__raw_writel(reg, GPIOPK_BASE + GPIOPK_FS0_OFFS);
+	reg = __raw_readl(GPIOPK_BASE + GPIOPK_FS1_OFFS);
+	reg &= ~(1 << 19);
+	__raw_writel(reg, GPIOPK_BASE + GPIOPK_FS1_OFFS);
+
+	reg = __raw_readl(GPIOPK_BASE + GPIOPK_DOE_OFFS);
+	reg |= (1 << 19);
+	__raw_writel(reg, GPIOPK_BASE + GPIOPK_DOE_OFFS);
+	/* Turn on VBUS */
+	reg = __raw_readl(GPIOPK_BASE + GPIOPK_DAT_OFFS);
+	reg |= (1 << 19);
+	__raw_writel(reg, GPIOPK_BASE + GPIOPK_DAT_OFFS);
+
+	return 0;
+}
+
+static struct resource tcc8k_ohci0_resources[] = {
+	[0] = {
+		.start = (resource_size_t)USBH0_BASE,
+		.end   = (resource_size_t)USBH0_BASE + 0x5c,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = INT_USBH0,
+		.end   = INT_USBH0,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct resource tcc8k_ohci1_resources[] = {
+	[0] = {
+		.start = (resource_size_t)USBH1_BASE,
+		.end   = (resource_size_t)USBH1_BASE + 0x5c,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = INT_USBH1,
+		.end   = INT_USBH1,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct tccohci_platform_data tcc8k_ohci0_platform_data = {
+	.controller	= 0,
+	.port_mode	= PMM_PERPORT_MODE,
+	.init		= tcc8k_ohci_init,
+};
+
+static struct tccohci_platform_data tcc8k_ohci1_platform_data = {
+	.controller	= 1,
+	.port_mode	= PMM_PERPORT_MODE,
+	.init		= tcc8k_ohci_init,
+};
+
+static struct platform_device ohci0_device = {
+	.name = "tcc-ohci",
+	.id = 0,
+	.dev = {
+		.dma_mask = &tcc8k_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.platform_data = &tcc8k_ohci0_platform_data,
+	},
+	.num_resources  = ARRAY_SIZE(tcc8k_ohci0_resources),
+	.resource       = tcc8k_ohci0_resources,
+};
+
+static struct platform_device ohci1_device = {
+	.name = "tcc-ohci",
+	.id = 1,
+	.dev = {
+		.dma_mask = &tcc8k_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.platform_data = &tcc8k_ohci1_platform_data,
+	},
+	.num_resources  = ARRAY_SIZE(tcc8k_ohci1_resources),
+	.resource       = tcc8k_ohci1_resources,
+};
+
+static void __init tcc8k_init_usbhost(void)
+{
+	platform_device_register(&ohci0_device);
+	platform_device_register(&ohci1_device);
+}
+#else
+static void __init tcc8k_init_usbhost(void) { }
+#endif
+
+/* USB device controller*/
+#ifdef CONFIG_USB_GADGET_TCC8K
+static struct resource udc_resources[] = {
+	[0] = {
+		.start = INT_USBD,
+		.end   = INT_USBD,
+		.flags = IORESOURCE_IRQ,
+	},
+	[1] = {
+		.start = INT_UDMA,
+		.end   = INT_UDMA,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tcc8k_udc_device = {
+	.name = "tcc-udc",
+	.id = 0,
+	.resource = udc_resources,
+	.num_resources = ARRAY_SIZE(udc_resources),
+	.dev = {
+		 .dma_mask = &tcc8k_dmamask,
+		 .coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
+
+static void __init tcc8k_init_usb_gadget(void)
+{
+	platform_device_register(&tcc8k_udc_device);
+}
+#else
+static void __init tcc8k_init_usb_gadget(void) { }
+#endif	/* CONFIG_USB_GADGET_TCC83X */
+
+static int __init tcc8k_init_devices(void)
+{
+	tcc8k_init_mmc();
+	tcc8k_init_usbhost();
+	tcc8k_init_usb_gadget();
+	return 0;
+}
+
+arch_initcall(tcc8k_init_devices);
diff --git a/arch/arm/mach-tcc8k/io.c b/arch/arm/mach-tcc8k/io.c
new file mode 100644
index 00000000000..9b39d7fa658
--- /dev/null
+++ b/arch/arm/mach-tcc8k/io.c
@@ -0,0 +1,62 @@
+/*
+ * linux/arch/arm/mach-tcc8k/io.c
+ *
+ * (C) 2009 Hans J. Koch <hjk@linutronix.de>
+ *
+ * derived from TCC83xx io.c
+ * Copyright (C) Telechips, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/tcc8k-regs.h>
+
+/*
+ * The machine specific code may provide the extra mapping besides the
+ * default mapping provided here.
+ */
+static struct map_desc tcc8k_io_desc[] __initdata = {
+	{
+		.virtual	= (unsigned long)CS1_BASE_VIRT,
+		.pfn		= __phys_to_pfn(CS1_BASE),
+		.length		= CS1_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)AHB_PERI_BASE_VIRT,
+		.pfn		= __phys_to_pfn(AHB_PERI_BASE),
+		.length		= AHB_PERI_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)APB0_PERI_BASE_VIRT,
+		.pfn		= __phys_to_pfn(APB0_PERI_BASE),
+		.length		= APB0_PERI_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)APB1_PERI_BASE_VIRT,
+		.pfn		= __phys_to_pfn(APB1_PERI_BASE),
+		.length		= APB1_PERI_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)EXT_MEM_CTRL_BASE_VIRT,
+		.pfn		= __phys_to_pfn(EXT_MEM_CTRL_BASE),
+		.length		= EXT_MEM_CTRL_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
+/*
+ * Maps common IO regions for tcc8k.
+ *
+ */
+void __init tcc8k_map_common_io(void)
+{
+	iotable_init(tcc8k_io_desc, ARRAY_SIZE(tcc8k_io_desc));
+}
diff --git a/arch/arm/mach-tcc8k/irq.c b/arch/arm/mach-tcc8k/irq.c
new file mode 100644
index 00000000000..34575c4963f
--- /dev/null
+++ b/arch/arm/mach-tcc8k/irq.c
@@ -0,0 +1,111 @@
+/*
+ * Copyright (C) Telechips, Inc.
+ * Copyright (C) 2009-2010 Hans J. Koch <hjk@linutronix.de>
+ *
+ * Licensed under the terms of the GNU GPL version 2.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+#include <asm/mach/irq.h>
+
+#include <mach/tcc8k-regs.h>
+#include <mach/irqs.h>
+
+#include "common.h"
+
+/* Disable IRQ */
+static void tcc8000_mask_ack_irq0(unsigned int irq)
+{
+	PIC0_IEN &= ~(1 << irq);
+	PIC0_CREQ |=  (1 << irq);
+}
+
+static void tcc8000_mask_ack_irq1(unsigned int irq)
+{
+	PIC1_IEN &= ~(1 << (irq - 32));
+	PIC1_CREQ |= (1 << (irq - 32));
+}
+
+static void tcc8000_mask_irq0(unsigned int irq)
+{
+	PIC0_IEN &= ~(1 << irq);
+}
+
+static void tcc8000_mask_irq1(unsigned int irq)
+{
+	PIC1_IEN &= ~(1 << (irq - 32));
+}
+
+static void tcc8000_ack_irq0(unsigned int irq)
+{
+	PIC0_CREQ |=  (1 << irq);
+}
+
+static void tcc8000_ack_irq1(unsigned int irq)
+{
+	PIC1_CREQ |= (1 << (irq - 32));
+}
+
+/* Enable IRQ */
+static void tcc8000_unmask_irq0(unsigned int irq)
+{
+	PIC0_IEN |= (1 << irq);
+	PIC0_INTOEN |= (1 << irq);
+}
+
+static void tcc8000_unmask_irq1(unsigned int irq)
+{
+	PIC1_IEN |= (1 << (irq - 32));
+	PIC1_INTOEN |= (1 << (irq - 32));
+}
+
+static struct irq_chip tcc8000_irq_chip0 = {
+	.name		= "tcc_irq0",
+	.mask		= tcc8000_mask_irq0,
+	.ack		= tcc8000_ack_irq0,
+	.mask_ack	= tcc8000_mask_ack_irq0,
+	.unmask		= tcc8000_unmask_irq0,
+};
+
+static struct irq_chip tcc8000_irq_chip1 = {
+	.name		= "tcc_irq1",
+	.mask		= tcc8000_mask_irq1,
+	.ack		= tcc8000_ack_irq1,
+	.mask_ack	= tcc8000_mask_ack_irq1,
+	.unmask		= tcc8000_unmask_irq1,
+};
+
+void __init tcc8k_init_irq(void)
+{
+	int irqno;
+
+	/* Mask and clear all interrupts */
+	PIC0_IEN = 0x00000000;
+	PIC0_CREQ = 0xffffffff;
+	PIC1_IEN = 0x00000000;
+	PIC1_CREQ = 0xffffffff;
+
+	PIC0_MEN0 = 0x00000003;
+	PIC1_MEN1 = 0x00000003;
+	PIC1_MEN = 0x00000003;
+
+	/* let all IRQs be level triggered */
+	PIC0_TMODE = 0xffffffff;
+	PIC1_TMODE = 0xffffffff;
+	/* all IRQs are IRQs (not FIQs) */
+	PIC0_IRQSEL = 0xffffffff;
+	PIC1_IRQSEL = 0xffffffff;
+
+	for (irqno = 0; irqno < NR_IRQS; irqno++) {
+		if (irqno < 32)
+			set_irq_chip(irqno, &tcc8000_irq_chip0);
+		else
+			set_irq_chip(irqno, &tcc8000_irq_chip1);
+		set_irq_handler(irqno, handle_level_irq);
+		set_irq_flags(irqno, IRQF_VALID);
+	}
+}
diff --git a/arch/arm/mach-tcc8k/time.c b/arch/arm/mach-tcc8k/time.c
new file mode 100644
index 00000000000..78d06008841
--- /dev/null
+++ b/arch/arm/mach-tcc8k/time.c
@@ -0,0 +1,149 @@
+/*
+ * TCC8000 system timer setup
+ *
+ * (C) 2009 Hans J. Koch <hjk@linutronix.de>
+ *
+ * Licensed under the terms of the GPL version 2.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+
+#include <asm/mach/time.h>
+
+#include <mach/tcc8k-regs.h>
+#include <mach/irqs.h>
+
+#include "common.h"
+
+static void __iomem *timer_base;
+
+static cycle_t tcc_get_cycles(struct clocksource *cs)
+{
+	return __raw_readl(timer_base + TC32MCNT_OFFS);
+}
+
+static struct clocksource clocksource_tcc = {
+	.name		= "tcc_tc32",
+	.rating		= 200,
+	.read		= tcc_get_cycles,
+	.mask		= CLOCKSOURCE_MASK(32),
+	.shift		= 28,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int tcc_set_next_event(unsigned long evt,
+			      struct clock_event_device *unused)
+{
+	unsigned long reg = __raw_readl(timer_base + TC32MCNT_OFFS);
+
+	__raw_writel(reg + evt, timer_base + TC32CMP0_OFFS);
+	return 0;
+}
+
+static void tcc_set_mode(enum clock_event_mode mode,
+				struct clock_event_device *evt)
+{
+	unsigned long tc32irq;
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_ONESHOT:
+		tc32irq = __raw_readl(timer_base + TC32IRQ_OFFS);
+		tc32irq |= TC32IRQ_IRQEN0;
+		__raw_writel(tc32irq, timer_base + TC32IRQ_OFFS);
+		break;
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_UNUSED:
+		tc32irq = __raw_readl(timer_base + TC32IRQ_OFFS);
+		tc32irq &= ~TC32IRQ_IRQEN0;
+		__raw_writel(tc32irq, timer_base + TC32IRQ_OFFS);
+		break;
+	case CLOCK_EVT_MODE_PERIODIC:
+	case CLOCK_EVT_MODE_RESUME:
+		break;
+	}
+}
+
+static irqreturn_t tcc8k_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = dev_id;
+
+	/* Acknowledge TC32 interrupt by reading TC32IRQ */
+	__raw_readl(timer_base + TC32IRQ_OFFS);
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static struct clock_event_device clockevent_tcc = {
+	.name		= "tcc_timer1",
+	.features	= CLOCK_EVT_FEAT_ONESHOT,
+	.shift		= 32,
+	.set_mode	= tcc_set_mode,
+	.set_next_event	= tcc_set_next_event,
+	.rating		= 200,
+};
+
+static struct irqaction tcc8k_timer_irq = {
+	.name		= "TC32_timer",
+	.flags		= IRQF_DISABLED | IRQF_TIMER,
+	.handler	= tcc8k_timer_interrupt,
+	.dev_id		= &clockevent_tcc,
+};
+
+static int __init tcc_clockevent_init(struct clk *clock)
+{
+	unsigned int c = clk_get_rate(clock);
+
+	clocksource_tcc.mult = clocksource_hz2mult(c,
+					clocksource_tcc.shift);
+	clocksource_register(&clocksource_tcc);
+
+	clockevent_tcc.mult = div_sc(c, NSEC_PER_SEC,
+					clockevent_tcc.shift);
+	clockevent_tcc.max_delta_ns =
+			clockevent_delta2ns(0xfffffffe, &clockevent_tcc);
+	clockevent_tcc.min_delta_ns =
+			clockevent_delta2ns(0xff, &clockevent_tcc);
+
+	clockevent_tcc.cpumask = cpumask_of(0);
+
+	clockevents_register_device(&clockevent_tcc);
+
+	return 0;
+}
+
+void __init tcc8k_timer_init(struct clk *clock, void __iomem *base, int irq)
+{
+	u32 reg;
+
+	timer_base = base;
+	tcc8k_timer_irq.irq = irq;
+
+	/* Enable clocks */
+	clk_enable(clock);
+
+	/* Initialize 32-bit timer */
+	reg = __raw_readl(timer_base + TC32EN_OFFS);
+	reg &= ~TC32EN_ENABLE; /* Disable timer */
+	__raw_writel(reg, timer_base + TC32EN_OFFS);
+	/* Free running timer, counting from 0 to 0xffffffff */
+	__raw_writel(0, timer_base + TC32EN_OFFS);
+	__raw_writel(0, timer_base + TC32LDV_OFFS);
+	reg = __raw_readl(timer_base + TC32IRQ_OFFS);
+	reg |= TC32IRQ_IRQEN0; /* irq at match with CMP0 */
+	__raw_writel(reg, timer_base + TC32IRQ_OFFS);
+
+	__raw_writel(TC32EN_ENABLE, timer_base + TC32EN_OFFS);
+
+	tcc_clockevent_init(clock);
+	setup_irq(irq, &tcc8k_timer_irq);
+}
diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c
index 9e305de56be..b9dbdb1289d 100644
--- a/arch/arm/mach-tegra/board-harmony.c
+++ b/arch/arm/mach-tegra/board-harmony.c
@@ -115,8 +115,6 @@ static void __init tegra_harmony_init(void)
 
 MACHINE_START(HARMONY, "harmony")
 	.boot_params  = 0x00000100,
-	.phys_io        = IO_APB_PHYS,
-	.io_pg_offst    = ((IO_APB_VIRT) >> 18) & 0xfffc,
 	.fixup		= tegra_harmony_fixup,
 	.init_irq       = tegra_init_irq,
 	.init_machine   = tegra_harmony_init,
diff --git a/arch/arm/mach-tegra/include/mach/debug-macro.S b/arch/arm/mach-tegra/include/mach/debug-macro.S
index 55a39564b43..8ea3bffb4e0 100644
--- a/arch/arm/mach-tegra/include/mach/debug-macro.S
+++ b/arch/arm/mach-tegra/include/mach/debug-macro.S
@@ -20,24 +20,28 @@
 
 #include <mach/io.h>
 
-	.macro  addruart,rx, tmp
-        mrc     p15, 0, \rx, c1, c0
-        tst     \rx, #1                 @ MMU enabled?
-        ldreq   \rx, =IO_APB_PHYS       @ physical
-        ldrne   \rx, =IO_APB_VIRT        @ virtual
+	.macro  addruart, rp, rv
+        ldreq   \rp, =IO_APB_PHYS       @ physical
+        ldrne   \rv, =IO_APB_VIRT        @ virtual
 #if defined(CONFIG_TEGRA_DEBUG_UART_NONE)
 #error "A debug UART must be selected in the kernel config to use DEBUG_LL"
 #elif defined(CONFIG_TEGRA_DEBUG_UARTA)
-        orr     \rx, \rx, #0x6000
+        orr     \rp, \rp, #0x6000
+        orr     \rv, \rv, #0x6000
 #elif defined(CONFIG_TEGRA_DEBUG_UARTB)
-	ldr	\tmp, =0x6040
-        orr     \rx, \rx, \tmp
+        orr     \rp, \rp, #0x6000
+	orr	\rp, \rp, #0x40
+        orr     \rv, \rv, #0x6000
+	orr	\rv, \rv, #0x40
 #elif defined(CONFIG_TEGRA_DEBUG_UARTC)
-        orr     \rx, \rx, #0x6200
+        orr     \rp, \rp, #0x6200
+        orr     \rv, \rv, #0x6200
 #elif defined(CONFIG_TEGRA_DEBUG_UARTD)
-        orr     \rx, \rx, #0x6300
+        orr     \rp, \rp, #0x6300
+        orr     \rv, \rv, #0x6300
 #elif defined(CONFIG_TEGRA_DEBUG_UARTE)
-        orr     \rx, \rx, #0x6400
+        orr     \rp, \rp, #0x6400
+        orr     \rv, \rv, #0x6400
 #endif
 	.endm
 
diff --git a/arch/arm/mach-tegra/include/mach/smp.h b/arch/arm/mach-tegra/include/mach/smp.h
index 8b42dab79a7..e4a34a35a54 100644
--- a/arch/arm/mach-tegra/include/mach/smp.h
+++ b/arch/arm/mach-tegra/include/mach/smp.h
@@ -1,16 +1,8 @@
 #ifndef ASMARM_ARCH_SMP_H
 #define ASMARM_ARCH_SMP_H
 
-
 #include <asm/hardware/gic.h>
-
-#define hard_smp_processor_id()			\
-	({						\
-		unsigned int cpunum;			\
-		__asm__("mrc p15, 0, %0, c0, c0, 5"	\
-			: "=r" (cpunum));		\
-		cpunum &= 0x0F;				\
-	})
+#include <asm/smp_mpidr.h>
 
 /*
  * We use IRQ1 as the IPI
diff --git a/arch/arm/mach-u300/include/mach/debug-macro.S b/arch/arm/mach-u300/include/mach/debug-macro.S
index 92c12420256..df715707bea 100644
--- a/arch/arm/mach-u300/include/mach/debug-macro.S
+++ b/arch/arm/mach-u300/include/mach/debug-macro.S
@@ -10,13 +10,12 @@
  */
 #include <mach/hardware.h>
 
-	.macro	addruart, rx, tmp
+	.macro	addruart, rp, rv
 	/* If we move the address using MMU, use this. */
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1			@ MMU enabled?
-	ldreq	\rx,	  = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address
-	ldrne	\rx,	  = U300_SLOW_PER_VIRT_BASE @ MMU on, virtual address
-	orr	\rx, \rx, #0x00003000
+	ldr	\rp,	  = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address
+	ldr	\rv,	  = U300_SLOW_PER_VIRT_BASE @ MMU on, virtual address
+	orr	\rp, \rp, #0x00003000
+	orr	\rv, \rv, #0x00003000
 	.endm
 
 #include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-u300/u300.c b/arch/arm/mach-u300/u300.c
index bfcda982088..07c35a84642 100644
--- a/arch/arm/mach-u300/u300.c
+++ b/arch/arm/mach-u300/u300.c
@@ -61,8 +61,6 @@ static void __init u300_init_machine(void)
 
 MACHINE_START(U300, MACH_U300_STRING)
 	/* Maintainer: Linus Walleij <linus.walleij@stericsson.com> */
-	.phys_io	= U300_AHB_PER_PHYS_BASE,
-	.io_pg_offst	= ((U300_AHB_PER_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= BOOT_PARAMS_OFFSET,
 	.map_io		= u300_map_io,
 	.reserve	= u300_reserve,
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 6625e5bbf4d..2dd44a0b461 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -21,9 +21,7 @@ config MACH_U8500_MOP
 	bool "U8500 Development platform"
 	select UX500_SOC_DB8500
 	help
-	  Include support for mop500 development platform
-	  based on U8500 architecture. The platform is based
-	  on early drop silicon version of 8500.
+	  Include support for the mop500 development platform.
 
 config MACH_U5500
 	bool "U5500 Development platform"
@@ -39,4 +37,18 @@ config UX500_DEBUG_UART
 	  Choose the UART on which kernel low-level debug messages should be
 	  output.
 
+config U5500_MODEM_IRQ
+	bool "Modem IRQ support"
+	depends on MACH_U5500
+	default y
+	help
+	  Add support for handling IRQ:s from modem side
+
+config U5500_MBOX
+	bool "Mailbox support"
+	depends on MACH_U5500 && U5500_MODEM_IRQ
+	default y
+	help
+	  Add support for U5500 mailbox communication with modem side
+
 endif
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index 4556aea9c3c..9e27a84433c 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -4,8 +4,12 @@
 
 obj-y				:= clock.o cpu.o devices.o
 obj-$(CONFIG_UX500_SOC_DB5500)	+= cpu-db5500.o devices-db5500.o
-obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o devices-db8500.o
-obj-$(CONFIG_MACH_U8500_MOP)	+= board-mop500.o
+obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o devices-db8500.o prcmu.o
+obj-$(CONFIG_MACH_U8500_MOP)	+= board-mop500.o board-mop500-sdi.o
 obj-$(CONFIG_MACH_U5500)	+= board-u5500.o
 obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
+obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
 obj-$(CONFIG_LOCAL_TIMERS)	+= localtimer.o
+obj-$(CONFIG_REGULATOR_AB8500)	+= board-mop500-regulators.o
+obj-$(CONFIG_U5500_MODEM_IRQ)	+= modem_irq.o
+obj-$(CONFIG_U5500_MBOX)	+= mbox.o
diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c
new file mode 100644
index 00000000000..1187f1fc2e5
--- /dev/null
+++ b/arch/arm/mach-ux500/board-mop500-regulators.c
@@ -0,0 +1,101 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * Author: Sundar Iyer <sundar.iyer@stericsson.com>
+ *
+ * MOP500 board specific initialization for regulators
+ */
+#include <linux/kernel.h>
+#include <linux/regulator/machine.h>
+
+/* supplies to the display/camera */
+static struct regulator_init_data ab8500_vaux1_regulator = {
+	.constraints = {
+		.name = "V-DISPLAY",
+		.min_uV = 2500000,
+		.max_uV = 2900000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE|
+					REGULATOR_CHANGE_STATUS,
+	},
+};
+
+/* supplies to the on-board eMMC */
+static struct regulator_init_data ab8500_vaux2_regulator = {
+	.constraints = {
+		.name = "V-eMMC1",
+		.min_uV = 1100000,
+		.max_uV = 3300000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE|
+					REGULATOR_CHANGE_STATUS,
+	},
+};
+
+/* supply for VAUX3, supplies to SDcard slots */
+static struct regulator_init_data ab8500_vaux3_regulator = {
+	.constraints = {
+		.name = "V-MMC-SD",
+		.min_uV = 1100000,
+		.max_uV = 3300000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE|
+					REGULATOR_CHANGE_STATUS,
+	},
+};
+
+/* supply for tvout, gpadc, TVOUT LDO */
+static struct regulator_init_data ab8500_vtvout_init = {
+	.constraints = {
+		.name = "V-TVOUT",
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+};
+
+/* supply for ab8500-vaudio, VAUDIO LDO */
+static struct regulator_init_data ab8500_vaudio_init = {
+	.constraints = {
+		.name = "V-AUD",
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+};
+
+/* supply for v-anamic1 VAMic1-LDO */
+static struct regulator_init_data ab8500_vamic1_init = {
+	.constraints = {
+		.name = "V-AMIC1",
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+};
+
+/* supply for v-amic2, VAMIC2 LDO, reuse constants for AMIC1 */
+static struct regulator_init_data ab8500_vamic2_init = {
+	.constraints = {
+		.name = "V-AMIC2",
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+};
+
+/* supply for v-dmic, VDMIC LDO */
+static struct regulator_init_data ab8500_vdmic_init = {
+	.constraints = {
+		.name = "V-DMIC",
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+};
+
+/* supply for v-intcore12, VINTCORE12 LDO */
+static struct regulator_init_data ab8500_vintcore_init = {
+	.constraints = {
+		.name = "V-INTCORE",
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+};
+
+/* supply for U8500 CSI/DSI, VANA LDO */
+static struct regulator_init_data ab8500_vana_init = {
+	.constraints = {
+		.name = "V-CSI/DSI",
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+};
+
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
new file mode 100644
index 00000000000..bac995665b5
--- /dev/null
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -0,0 +1,91 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Hanumath Prasad <hanumath.prasad@stericsson.com>
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/mmci.h>
+#include <linux/mmc/host.h>
+#include <linux/platform_device.h>
+
+#include <plat/pincfg.h>
+#include <mach/devices.h>
+#include <mach/hardware.h>
+
+#include "pins-db8500.h"
+#include "board-mop500.h"
+
+static pin_cfg_t mop500_sdi_pins[] = {
+	/* SDI4 (on-board eMMC) */
+	GPIO197_MC4_DAT3,
+	GPIO198_MC4_DAT2,
+	GPIO199_MC4_DAT1,
+	GPIO200_MC4_DAT0,
+	GPIO201_MC4_CMD,
+	GPIO202_MC4_FBCLK,
+	GPIO203_MC4_CLK,
+	GPIO204_MC4_DAT7,
+	GPIO205_MC4_DAT6,
+	GPIO206_MC4_DAT5,
+	GPIO207_MC4_DAT4,
+};
+
+static pin_cfg_t mop500_sdi2_pins[] = {
+	/* SDI2 (POP eMMC) */
+	GPIO128_MC2_CLK,
+	GPIO129_MC2_CMD,
+	GPIO130_MC2_FBCLK,
+	GPIO131_MC2_DAT0,
+	GPIO132_MC2_DAT1,
+	GPIO133_MC2_DAT2,
+	GPIO134_MC2_DAT3,
+	GPIO135_MC2_DAT4,
+	GPIO136_MC2_DAT5,
+	GPIO137_MC2_DAT6,
+	GPIO138_MC2_DAT7,
+};
+
+/*
+ * SDI 2 (POP eMMC, not on DB8500ed)
+ */
+
+static struct mmci_platform_data mop500_sdi2_data = {
+	.ocr_mask	= MMC_VDD_165_195,
+	.f_max		= 100000000,
+	.capabilities	= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
+	.gpio_cd	= -1,
+	.gpio_wp	= -1,
+};
+
+/*
+ * SDI 4 (on-board eMMC)
+ */
+
+static struct mmci_platform_data mop500_sdi4_data = {
+	.ocr_mask	= MMC_VDD_29_30,
+	.f_max		= 100000000,
+	.capabilities	= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA |
+			  MMC_CAP_MMC_HIGHSPEED,
+	.gpio_cd	= -1,
+	.gpio_wp	= -1,
+};
+
+void mop500_sdi_init(void)
+{
+	nmk_config_pins(mop500_sdi_pins, ARRAY_SIZE(mop500_sdi_pins));
+
+	u8500_sdi2_device.dev.platform_data = &mop500_sdi2_data;
+	u8500_sdi4_device.dev.platform_data = &mop500_sdi4_data;
+
+	if (!cpu_is_u8500ed()) {
+		nmk_config_pins(mop500_sdi2_pins, ARRAY_SIZE(mop500_sdi2_pins));
+		amba_device_register(&u8500_sdi2_device, &iomem_resource);
+	}
+
+	/* On-board eMMC */
+	amba_device_register(&u8500_sdi4_device, &iomem_resource);
+}
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 219ae0ca4ee..fcb587f825c 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -28,8 +28,10 @@
 #include <mach/hardware.h>
 #include <mach/setup.h>
 #include <mach/devices.h>
+#include <mach/irqs.h>
 
 #include "pins-db8500.h"
+#include "board-mop500.h"
 
 static pin_cfg_t mop500_pins[] = {
 	/* SSP0 */
@@ -69,9 +71,27 @@ static struct ab8500_platform_data ab8500_platdata = {
 	.irq_base	= MOP500_AB8500_IRQ_BASE,
 };
 
-static struct spi_board_info u8500_spi_devices[] = {
+static struct resource ab8500_resources[] = {
+	[0] = {
+		.start = IRQ_AB8500,
+		.end = IRQ_AB8500,
+		.flags = IORESOURCE_IRQ
+	}
+};
+
+struct platform_device ab8500_device = {
+	.name = "ab8500-i2c",
+	.id = 0,
+	.dev = {
+		.platform_data = &ab8500_platdata,
+	},
+	.num_resources = 1,
+	.resource = ab8500_resources,
+};
+
+static struct spi_board_info ab8500_spi_devices[] = {
 	{
-		.modalias = "ab8500",
+		.modalias = "ab8500-spi",
 		.controller_data = &ab4500_chip_info,
 		.platform_data = &ab8500_platdata,
 		.max_speed_hz = 12000000,
@@ -157,14 +177,18 @@ static void __init u8500_init_machine(void)
 
 	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
 
-	spi_register_board_info(u8500_spi_devices,
-			ARRAY_SIZE(u8500_spi_devices));
+	mop500_sdi_init();
+
+	/* If HW is early drop (ED) or V1.0 then use SPI to access AB8500 */
+	if (cpu_is_u8500ed() || cpu_is_u8500v10())
+		spi_register_board_info(ab8500_spi_devices,
+			ARRAY_SIZE(ab8500_spi_devices));
+	else /* If HW is v.1.1 or later use I2C to access AB8500 */
+		platform_device_register(&ab8500_device);
 }
 
 MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
 	/* Maintainer: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> */
-	.phys_io	= U8500_UART2_BASE,
-	.io_pg_offst	= (IO_ADDRESS(U8500_UART2_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x100,
 	.map_io		= u8500_map_io,
 	.init_irq	= ux500_init_irq,
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
new file mode 100644
index 00000000000..2d240322fa6
--- /dev/null
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -0,0 +1,12 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef __BOARD_MOP500_H
+#define __BOARD_MOP500_H
+
+extern void mop500_sdi_init(void);
+
+#endif
diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c
index 4430e69cf53..1ca094a45e7 100644
--- a/arch/arm/mach-ux500/board-u5500.c
+++ b/arch/arm/mach-ux500/board-u5500.c
@@ -31,8 +31,6 @@ static void __init u5500_init_machine(void)
 }
 
 MACHINE_START(U8500, "ST-Ericsson U5500 Platform")
-	.phys_io	= UX500_UART0_BASE,
-	.io_pg_offst	= (IO_ADDRESS(UX500_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.map_io		= u5500_map_io,
 	.init_irq	= ux500_init_irq,
diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c
index e9278f6d67a..2f87075e9d6 100644
--- a/arch/arm/mach-ux500/cpu-db5500.c
+++ b/arch/arm/mach-ux500/cpu-db5500.c
@@ -14,6 +14,7 @@
 #include <mach/hardware.h>
 #include <mach/devices.h>
 #include <mach/setup.h>
+#include <mach/irqs.h>
 
 static struct map_desc u5500_io_desc[] __initdata = {
 	__IO_DEV_DESC(U5500_GPIO0_BASE, SZ_4K),
@@ -24,6 +25,90 @@ static struct map_desc u5500_io_desc[] __initdata = {
 	__IO_DEV_DESC(U5500_PRCMU_BASE, SZ_4K),
 };
 
+static struct resource mbox0_resources[] = {
+	{
+		.name = "mbox_peer",
+		.start = U5500_MBOX0_PEER_START,
+		.end = U5500_MBOX0_PEER_END,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name = "mbox_local",
+		.start = U5500_MBOX0_LOCAL_START,
+		.end = U5500_MBOX0_LOCAL_END,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name = "mbox_irq",
+		.start = MBOX_PAIR0_VIRT_IRQ,
+		.end = MBOX_PAIR0_VIRT_IRQ,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct resource mbox1_resources[] = {
+	{
+		.name = "mbox_peer",
+		.start = U5500_MBOX1_PEER_START,
+		.end = U5500_MBOX1_PEER_END,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name = "mbox_local",
+		.start = U5500_MBOX1_LOCAL_START,
+		.end = U5500_MBOX1_LOCAL_END,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name = "mbox_irq",
+		.start = MBOX_PAIR1_VIRT_IRQ,
+		.end = MBOX_PAIR1_VIRT_IRQ,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct resource mbox2_resources[] = {
+	{
+		.name = "mbox_peer",
+		.start = U5500_MBOX2_PEER_START,
+		.end = U5500_MBOX2_PEER_END,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name = "mbox_local",
+		.start = U5500_MBOX2_LOCAL_START,
+		.end = U5500_MBOX2_LOCAL_END,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name = "mbox_irq",
+		.start = MBOX_PAIR2_VIRT_IRQ,
+		.end = MBOX_PAIR2_VIRT_IRQ,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device mbox0_device = {
+	.id = 0,
+	.name = "mbox",
+	.resource = mbox0_resources,
+	.num_resources = ARRAY_SIZE(mbox0_resources),
+};
+
+static struct platform_device mbox1_device = {
+	.id = 1,
+	.name = "mbox",
+	.resource = mbox1_resources,
+	.num_resources = ARRAY_SIZE(mbox1_resources),
+};
+
+static struct platform_device mbox2_device = {
+	.id = 2,
+	.name = "mbox",
+	.resource = mbox2_resources,
+	.num_resources = ARRAY_SIZE(mbox2_resources),
+};
+
 static struct platform_device *u5500_platform_devs[] __initdata = {
 	&u5500_gpio_devs[0],
 	&u5500_gpio_devs[1],
@@ -33,6 +118,9 @@ static struct platform_device *u5500_platform_devs[] __initdata = {
 	&u5500_gpio_devs[5],
 	&u5500_gpio_devs[6],
 	&u5500_gpio_devs[7],
+	&mbox0_device,
+	&mbox1_device,
+	&mbox2_device,
 };
 
 void __init u5500_map_io(void)
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index f21c444edd9..4acab7544b3 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -38,10 +38,12 @@ static struct platform_device *platform_devs[] __initdata = {
 /* minimum static i/o mapping required to boot U8500 platforms */
 static struct map_desc u8500_io_desc[] __initdata = {
 	__IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K),
+	__IO_DEV_DESC(U8500_PRCMU_TCDM_BASE, SZ_4K),
 	__IO_DEV_DESC(U8500_GPIO0_BASE, SZ_4K),
 	__IO_DEV_DESC(U8500_GPIO1_BASE, SZ_4K),
 	__IO_DEV_DESC(U8500_GPIO2_BASE, SZ_4K),
 	__IO_DEV_DESC(U8500_GPIO3_BASE, SZ_4K),
+	__MEM_DEV_DESC(U8500_BOOT_ROM_BASE, SZ_1M),
 };
 
 static struct map_desc u8500ed_io_desc[] __initdata = {
@@ -53,6 +55,69 @@ static struct map_desc u8500v1_io_desc[] __initdata = {
 	__IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K),
 };
 
+/*
+ * Functions to differentiate between later ASICs
+ * We look into the end of the ROM to locate the hardcoded ASIC ID.
+ * This is only needed to differentiate between minor revisions and
+ * process variants of an ASIC, the major revisions are encoded in
+ * the cpuid.
+ */
+#define U8500_ASIC_ID_LOC_ED_V1	(U8500_BOOT_ROM_BASE + 0x1FFF4)
+#define U8500_ASIC_ID_LOC_V2	(U8500_BOOT_ROM_BASE + 0x1DBF4)
+#define U8500_ASIC_REV_ED	0x01
+#define U8500_ASIC_REV_V10	0xA0
+#define U8500_ASIC_REV_V11	0xA1
+#define U8500_ASIC_REV_V20	0xB0
+
+/**
+ * struct db8500_asic_id - fields of the ASIC ID
+ * @process: the manufacturing process, 0x40 is 40 nm
+ *  0x00 is "standard"
+ * @partnumber: hithereto 0x8500 for DB8500
+ * @revision: version code in the series
+ * This field definion is not formally defined but makes
+ * sense.
+ */
+struct db8500_asic_id {
+	u8 process;
+	u16 partnumber;
+	u8 revision;
+};
+
+/* This isn't going to change at runtime */
+static struct db8500_asic_id db8500_id;
+
+static void __init get_db8500_asic_id(void)
+{
+	u32 asicid;
+
+	if (cpu_is_u8500v1() || cpu_is_u8500ed())
+		asicid = readl(__io_address(U8500_ASIC_ID_LOC_ED_V1));
+	else if (cpu_is_u8500v2())
+		asicid = readl(__io_address(U8500_ASIC_ID_LOC_V2));
+	else
+		BUG();
+
+	db8500_id.process = (asicid >> 24);
+	db8500_id.partnumber = (asicid >> 16) & 0xFFFFU;
+	db8500_id.revision = asicid & 0xFFU;
+}
+
+bool cpu_is_u8500v10(void)
+{
+	return (db8500_id.revision == U8500_ASIC_REV_V10);
+}
+
+bool cpu_is_u8500v11(void)
+{
+	return (db8500_id.revision == U8500_ASIC_REV_V11);
+}
+
+bool cpu_is_u8500v20(void)
+{
+	return (db8500_id.revision == U8500_ASIC_REV_V20);
+}
+
 void __init u8500_map_io(void)
 {
 	ux500_map_io();
@@ -63,6 +128,9 @@ void __init u8500_map_io(void)
 		iotable_init(u8500ed_io_desc, ARRAY_SIZE(u8500ed_io_desc));
 	else
 		iotable_init(u8500v1_io_desc, ARRAY_SIZE(u8500v1_io_desc));
+
+	/* Read out the ASIC ID as early as we can */
+	get_db8500_asic_id();
 }
 
 /*
@@ -70,6 +138,20 @@ void __init u8500_map_io(void)
  */
 void __init u8500_init_devices(void)
 {
+	/* Display some ASIC boilerplate */
+	pr_info("DB8500: process: %02x, revision ID: 0x%02x\n",
+		db8500_id.process, db8500_id.revision);
+	if (cpu_is_u8500ed())
+		pr_info("DB8500: Early Drop (ED)\n");
+	else if (cpu_is_u8500v10())
+		pr_info("DB8500: version 1.0\n");
+	else if (cpu_is_u8500v11())
+		pr_info("DB8500: version 1.1\n");
+	else if (cpu_is_u8500v20())
+		pr_info("DB8500: version 2.0\n");
+	else
+		pr_warning("ASIC: UNKNOWN SILICON VERSION!\n");
+
 	ux500_init_devices();
 
 	if (cpu_is_u8500ed())
diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c
index 9280d256111..40032fecbc1 100644
--- a/arch/arm/mach-ux500/devices-db8500.c
+++ b/arch/arm/mach-ux500/devices-db8500.c
@@ -110,6 +110,82 @@ struct platform_device u8500_i2c4_device = {
 	.num_resources	= ARRAY_SIZE(u8500_i2c4_resources),
 };
 
+/*
+ * SD/MMC
+ */
+
+struct amba_device u8500_sdi0_device = {
+	.dev		= {
+		.init_name = "sdi0",
+	},
+	.res		= {
+		.start	= U8500_SDI0_BASE,
+		.end	= U8500_SDI0_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	.irq		= {IRQ_DB8500_SDMMC0, NO_IRQ},
+};
+
+struct amba_device u8500_sdi1_device = {
+	.dev		= {
+		.init_name = "sdi1",
+	},
+	.res		= {
+		.start	= U8500_SDI1_BASE,
+		.end	= U8500_SDI1_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	.irq		= {IRQ_DB8500_SDMMC1, NO_IRQ},
+};
+
+struct amba_device u8500_sdi2_device = {
+	.dev		= {
+		.init_name = "sdi2",
+	},
+	.res		= {
+		.start	= U8500_SDI2_BASE,
+		.end	= U8500_SDI2_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	.irq		= {IRQ_DB8500_SDMMC2, NO_IRQ},
+};
+
+struct amba_device u8500_sdi3_device = {
+	.dev		= {
+		.init_name = "sdi3",
+	},
+	.res		= {
+		.start	= U8500_SDI3_BASE,
+		.end	= U8500_SDI3_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	.irq		= {IRQ_DB8500_SDMMC3, NO_IRQ},
+};
+
+struct amba_device u8500_sdi4_device = {
+	.dev		= {
+		.init_name = "sdi4",
+	},
+	.res		= {
+		.start	= U8500_SDI4_BASE,
+		.end	= U8500_SDI4_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	.irq		= {IRQ_DB8500_SDMMC4, NO_IRQ},
+};
+
+struct amba_device u8500_sdi5_device = {
+	.dev		= {
+		.init_name = "sdi5",
+	},
+	.res		= {
+		.start	= U8500_SDI5_BASE,
+		.end	= U8500_SDI5_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	.irq		= {IRQ_DB8500_SDMMC5, NO_IRQ},
+};
+
 static struct resource dma40_resources[] = {
 	[0] = {
 		.start = U8500_DMA_BASE,
@@ -170,23 +246,23 @@ struct stedma40_chan_cfg dma40_memcpy_conf_log = {
  * Mapping between destination event lines and physical device address.
  * The event line is tied to a device and therefor the address is constant.
  */
-static const dma_addr_t dma40_tx_map[STEDMA40_NR_DEV];
+static const dma_addr_t dma40_tx_map[DB8500_DMA_NR_DEV];
 
 /* Mapping between source event lines and physical device address */
-static const dma_addr_t dma40_rx_map[STEDMA40_NR_DEV];
+static const dma_addr_t dma40_rx_map[DB8500_DMA_NR_DEV];
 
 /* Reserved event lines for memcpy only */
 static int dma40_memcpy_event[] = {
-	STEDMA40_MEMCPY_TX_0,
-	STEDMA40_MEMCPY_TX_1,
-	STEDMA40_MEMCPY_TX_2,
-	STEDMA40_MEMCPY_TX_3,
-	STEDMA40_MEMCPY_TX_4,
-	STEDMA40_MEMCPY_TX_5,
+	DB8500_DMA_MEMCPY_TX_0,
+	DB8500_DMA_MEMCPY_TX_1,
+	DB8500_DMA_MEMCPY_TX_2,
+	DB8500_DMA_MEMCPY_TX_3,
+	DB8500_DMA_MEMCPY_TX_4,
+	DB8500_DMA_MEMCPY_TX_5,
 };
 
 static struct stedma40_platform_data dma40_plat_data = {
-	.dev_len = STEDMA40_NR_DEV,
+	.dev_len = DB8500_DMA_NR_DEV,
 	.dev_rx = dma40_rx_map,
 	.dev_tx = dma40_tx_map,
 	.memcpy = dma40_memcpy_event,
diff --git a/arch/arm/mach-ux500/hotplug.c b/arch/arm/mach-ux500/hotplug.c
new file mode 100644
index 00000000000..b782a03024b
--- /dev/null
+++ b/arch/arm/mach-ux500/hotplug.c
@@ -0,0 +1,75 @@
+/*
+ * Copyright (C) STMicroelectronics 2009
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ *	Based on ARM realview platform
+ *
+ * Author: Sundar Iyer <sundar.iyer@stericsson.com>
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/smp.h>
+#include <linux/completion.h>
+
+#include <asm/cacheflush.h>
+
+extern volatile int pen_release;
+
+static DECLARE_COMPLETION(cpu_killed);
+
+static inline void platform_do_lowpower(unsigned int cpu)
+{
+	flush_cache_all();
+
+	/* we put the platform to just WFI */
+	for (;;) {
+		__asm__ __volatile__("dsb\n\t" "wfi\n\t"
+				: : : "memory");
+		if (pen_release == cpu) {
+			/*
+			 * OK, proper wakeup, we're done
+			 */
+			break;
+		}
+	}
+}
+
+int platform_cpu_kill(unsigned int cpu)
+{
+	return wait_for_completion_timeout(&cpu_killed, 5000);
+}
+
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ * Called with IRQs disabled
+ */
+void platform_cpu_die(unsigned int cpu)
+{
+#ifdef DEBUG
+	unsigned int this_cpu = hard_smp_processor_id();
+
+	if (cpu != this_cpu) {
+		printk(KERN_CRIT "Eek! platform_cpu_die running on %u, should be %u\n",
+			   this_cpu, cpu);
+		BUG();
+	}
+#endif
+
+	printk(KERN_NOTICE "CPU%u: shutdown\n", cpu);
+	complete(&cpu_killed);
+
+	/* directly enter low power state, skipping secure registers */
+	platform_do_lowpower(cpu);
+}
+
+int platform_cpu_disable(unsigned int cpu)
+{
+	/*
+	 * we don't allow CPU 0 to be shutdown (it is still too special
+	 * e.g. clock tick interrupts)
+	 */
+	return cpu == 0 ? -EPERM : 0;
+}
diff --git a/arch/arm/mach-ux500/include/mach/db5500-regs.h b/arch/arm/mach-ux500/include/mach/db5500-regs.h
index 545c80fc802..3eafc0e24ba 100644
--- a/arch/arm/mach-ux500/include/mach/db5500-regs.h
+++ b/arch/arm/mach-ux500/include/mach/db5500-regs.h
@@ -100,4 +100,18 @@
 #define U5500_GPIOBANK6_BASE	(U5500_GPIO4_BASE + 0x80)
 #define U5500_GPIOBANK7_BASE	(U5500_GPIO4_BASE + 0x100)
 
+#define U5500_MBOX_BASE		(U5500_MODEM_BASE + 0xFFD1000)
+#define U5500_MBOX0_PEER_START	(U5500_MBOX_BASE + 0x40)
+#define U5500_MBOX0_PEER_END	(U5500_MBOX_BASE + 0x5F)
+#define U5500_MBOX0_LOCAL_START	(U5500_MBOX_BASE + 0x60)
+#define U5500_MBOX0_LOCAL_END	(U5500_MBOX_BASE + 0x7F)
+#define U5500_MBOX1_PEER_START	(U5500_MBOX_BASE + 0x80)
+#define U5500_MBOX1_PEER_END	(U5500_MBOX_BASE + 0x9F)
+#define U5500_MBOX1_LOCAL_START	(U5500_MBOX_BASE + 0xA0)
+#define U5500_MBOX1_LOCAL_END	(U5500_MBOX_BASE + 0xBF)
+#define U5500_MBOX2_PEER_START	(U5500_MBOX_BASE + 0x00)
+#define U5500_MBOX2_PEER_END	(U5500_MBOX_BASE + 0x1F)
+#define U5500_MBOX2_LOCAL_START	(U5500_MBOX_BASE + 0x20)
+#define U5500_MBOX2_LOCAL_END	(U5500_MBOX_BASE + 0x3F)
+
 #endif
diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h
index f000218210c..f07d0986409 100644
--- a/arch/arm/mach-ux500/include/mach/db8500-regs.h
+++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h
@@ -30,8 +30,6 @@
 #define U8500_ICN_BASE		0x81000000
 
 #define U8500_BOOT_ROM_BASE	0x90000000
-/* ASIC ID is at 0xff4 offset within this region */
-#define U8500_ASIC_ID_BASE	0x9001F000
 
 #define U8500_PER6_BASE		0xa03c0000
 #define U8500_PER5_BASE		0xa03e0000
diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S
index c5203b7ea55..be7c0f14e31 100644
--- a/arch/arm/mach-ux500/include/mach/debug-macro.S
+++ b/arch/arm/mach-ux500/include/mach/debug-macro.S
@@ -18,11 +18,9 @@
 #define UX500_UART(n)	__UX500_UART(n)
 #define UART_BASE	UX500_UART(CONFIG_UX500_DEBUG_UART)
 
-	.macro	addruart, rx, tmp
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1					@ MMU enabled?
-	ldreq	\rx, =UART_BASE				@ no, physical address
-	ldrne	\rx, =IO_ADDRESS(UART_BASE)		@ yes, virtual address
+	.macro	addruart, rp, rv
+	ldr	\rp, =UART_BASE				@ no, physical address
+	ldr	\rv, =IO_ADDRESS(UART_BASE)		@ yes, virtual address
 	.endm
 
 #include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-ux500/include/mach/devices.h b/arch/arm/mach-ux500/include/mach/devices.h
index c2b2f257494..33a120c2e82 100644
--- a/arch/arm/mach-ux500/include/mach/devices.h
+++ b/arch/arm/mach-ux500/include/mach/devices.h
@@ -27,6 +27,13 @@ extern struct platform_device u8500_i2c0_device;
 extern struct platform_device u8500_i2c4_device;
 extern struct platform_device u8500_dma40_device;
 
+extern struct amba_device u8500_sdi0_device;
+extern struct amba_device u8500_sdi1_device;
+extern struct amba_device u8500_sdi2_device;
+extern struct amba_device u8500_sdi3_device;
+extern struct amba_device u8500_sdi4_device;
+extern struct amba_device u8500_sdi5_device;
+
 void dma40_u8500ed_fixup(void);
 
 #endif
diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h
index 8656379a830..32e883a8f2a 100644
--- a/arch/arm/mach-ux500/include/mach/hardware.h
+++ b/arch/arm/mach-ux500/include/mach/hardware.h
@@ -104,16 +104,35 @@ static inline bool cpu_is_u8500(void)
 #endif
 }
 
+#define CPUID_DB8500ED	0x410fc090
+#define CPUID_DB8500V1	0x411fc091
+#define CPUID_DB8500V2	0x412fc091
+
 static inline bool cpu_is_u8500ed(void)
 {
-	return cpu_is_u8500() && (read_cpuid_id() & 15) == 0;
+	return cpu_is_u8500() && (read_cpuid_id() == CPUID_DB8500ED);
 }
 
 static inline bool cpu_is_u8500v1(void)
 {
-	return cpu_is_u8500() && (read_cpuid_id() & 15) == 1;
+	return cpu_is_u8500() && (read_cpuid_id() == CPUID_DB8500V1);
+}
+
+static inline bool cpu_is_u8500v2(void)
+{
+	return cpu_is_u8500() && (read_cpuid_id() == CPUID_DB8500V2);
 }
 
+#ifdef CONFIG_UX500_SOC_DB8500
+bool cpu_is_u8500v10(void);
+bool cpu_is_u8500v11(void);
+bool cpu_is_u8500v20(void);
+#else
+static inline bool cpu_is_u8500v10(void) { return false; }
+static inline bool cpu_is_u8500v11(void) { return false; }
+static inline bool cpu_is_u8500v20(void) { return false; }
+#endif
+
 static inline bool cpu_is_u5500(void)
 {
 #ifdef CONFIG_UX500_SOC_DB5500
diff --git a/arch/arm/mach-ux500/include/mach/irqs-db5500.h b/arch/arm/mach-ux500/include/mach/irqs-db5500.h
index 6fbfe5e2065..bfa123dbec3 100644
--- a/arch/arm/mach-ux500/include/mach/irqs-db5500.h
+++ b/arch/arm/mach-ux500/include/mach/irqs-db5500.h
@@ -61,6 +61,7 @@
 #define IRQ_DB5500_SDMMC0		(IRQ_SHPI_START + 60)
 #define IRQ_DB5500_HSEM			(IRQ_SHPI_START + 61)
 #define IRQ_DB5500_SBAG			(IRQ_SHPI_START + 63)
+#define IRQ_DB5500_MODEM		(IRQ_SHPI_START + 65)
 #define IRQ_DB5500_SPI1			(IRQ_SHPI_START + 96)
 #define IRQ_DB5500_MSP2			(IRQ_SHPI_START + 98)
 #define IRQ_DB5500_SRPTIMER		(IRQ_SHPI_START + 101)
diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h
index 10385bdc2b7..693aa57de88 100644
--- a/arch/arm/mach-ux500/include/mach/irqs.h
+++ b/arch/arm/mach-ux500/include/mach/irqs.h
@@ -40,7 +40,8 @@
 #define IRQ_HSIR_CH1_OVRRUN	(IRQ_SHPI_START + 33)
 #define IRQ_HSIR_CH2_OVRRUN	(IRQ_SHPI_START + 34)
 #define IRQ_HSIR_CH3_OVRRUN	(IRQ_SHPI_START + 35)
-#define IRQ_AB4500		(IRQ_SHPI_START + 40)
+#define IRQ_AB8500		(IRQ_SHPI_START + 40)
+#define IRQ_PRCMU               (IRQ_SHPI_START + 47)
 #define IRQ_DISP		(IRQ_SHPI_START + 48)
 #define IRQ_SiPI3		(IRQ_SHPI_START + 49)
 #define IRQ_I2C4		(IRQ_SHPI_START + 51)
@@ -83,6 +84,19 @@
 #include <mach/irqs-board-mop500.h>
 #endif
 
-#define NR_IRQS				IRQ_BOARD_END
+/*
+ * After the board specific IRQ:s we reserve a range of IRQ:s in which virtual
+ * IRQ:s representing modem IRQ:s can be allocated
+ */
+#define IRQ_MODEM_EVENTS_BASE (IRQ_BOARD_END + 1)
+#define IRQ_MODEM_EVENTS_NBR 72
+#define IRQ_MODEM_EVENTS_END (IRQ_MODEM_EVENTS_BASE + IRQ_MODEM_EVENTS_NBR)
+
+/* List of virtual IRQ:s that are allocated from the range above */
+#define MBOX_PAIR0_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 43)
+#define MBOX_PAIR1_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 45)
+#define MBOX_PAIR2_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 41)
+
+#define NR_IRQS				IRQ_MODEM_EVENTS_END
 
 #endif /* ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-ux500/include/mach/mbox.h b/arch/arm/mach-ux500/include/mach/mbox.h
new file mode 100644
index 00000000000..7f9da4d2fbd
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/mbox.h
@@ -0,0 +1,88 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Author: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> for ST-Ericsson.
+ * Author: Martin Persson <martin.persson@stericsson.com> for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2.
+ */
+
+#ifndef __INC_STE_MBOX_H
+#define __INC_STE_MBOX_H
+
+#define MBOX_BUF_SIZE 16
+#define MBOX_NAME_SIZE 8
+
+/**
+  * mbox_recv_cb_t - Definition of the mailbox callback.
+  * @mbox_msg:	The mailbox message.
+  * @priv:	The clients private data as specified in the call to mbox_setup.
+  *
+  * This function will be called upon reception of new mailbox messages.
+  */
+typedef void mbox_recv_cb_t (u32 mbox_msg, void *priv);
+
+/**
+  * struct mbox - Mailbox instance struct
+  * @list:		Linked list head.
+  * @pdev:		Pointer to device struct.
+  * @cb:		Callback function. Will be called
+  *			when new data is received.
+  * @client_data:	Clients private data. Will be sent back
+  *			in the callback function.
+  * @virtbase_peer:	Virtual address for outgoing mailbox.
+  * @virtbase_local:	Virtual address for incoming mailbox.
+  * @buffer:		Then internal queue for outgoing messages.
+  * @name:		Name of this mailbox.
+  * @buffer_available:	Completion variable to achieve "blocking send".
+  *			This variable will be signaled when there is
+  *			internal buffer space available.
+  * @client_blocked:	To keep track if any client is currently
+  *			blocked.
+  * @lock:		Spinlock to protect this mailbox instance.
+  * @write_index:	Index in internal buffer to write to.
+  * @read_index:	Index in internal buffer to read from.
+  * @allocated:		Indicates whether this particular mailbox
+  *			id has been allocated by someone.
+  */
+struct mbox {
+	struct list_head list;
+	struct platform_device *pdev;
+	mbox_recv_cb_t *cb;
+	void *client_data;
+	void __iomem *virtbase_peer;
+	void __iomem *virtbase_local;
+	u32 buffer[MBOX_BUF_SIZE];
+	char name[MBOX_NAME_SIZE];
+	struct completion buffer_available;
+	u8 client_blocked;
+	spinlock_t lock;
+	u8 write_index;
+	u8 read_index;
+	bool allocated;
+};
+
+/**
+  * mbox_setup - Set up a mailbox and return its instance.
+  * @mbox_id:	The ID number of the mailbox. 0 or 1 for modem CPU,
+  *		2 for modem DSP.
+  * @mbox_cb:	Pointer to the callback function to be called when a new message
+  *		is received.
+  * @priv:	Client user data which will be returned in the callback.
+  *
+  * Returns a mailbox instance to be specified in subsequent calls to mbox_send.
+  */
+struct mbox *mbox_setup(u8 mbox_id, mbox_recv_cb_t *mbox_cb, void *priv);
+
+/**
+  * mbox_send - Send a mailbox message.
+  * @mbox:	Mailbox instance (returned by mbox_setup)
+  * @mbox_msg:	The mailbox message to send.
+  * @block:	Specifies whether this call will block until send is possible,
+  *		or return an error if the mailbox buffer is full.
+  *
+  * Returns 0 on success or a negative error code on error. -ENOMEM indicates
+  * that the internal buffer is full and you have to try again later (or
+  * specify "block" in order to block until send is possible).
+  */
+int mbox_send(struct mbox *mbox, u32 mbox_msg, bool block);
+
+#endif /*INC_STE_MBOX_H*/
diff --git a/arch/arm/mach-ux500/include/mach/prcmu-regs.h b/arch/arm/mach-ux500/include/mach/prcmu-regs.h
new file mode 100644
index 00000000000..8885f39a642
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/prcmu-regs.h
@@ -0,0 +1,91 @@
+/*
+ * Copyright (c) 2009 ST-Ericsson SA
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ */
+#ifndef __MACH_PRCMU_REGS_H
+#define __MACH_PRCMU_REGS_H
+
+#include <mach/hardware.h>
+
+#define _PRCMU_BASE		IO_ADDRESS(U8500_PRCMU_BASE)
+
+#define PRCM_ARM_PLLDIVPS	(_PRCMU_BASE + 0x118)
+#define PRCM_ARM_CHGCLKREQ	(_PRCMU_BASE + 0x114)
+#define PRCM_PLLARM_ENABLE	(_PRCMU_BASE + 0x98)
+#define PRCM_ARMCLKFIX_MGT	(_PRCMU_BASE + 0x0)
+#define PRCM_A9_RESETN_CLR	(_PRCMU_BASE + 0x1f4)
+#define PRCM_A9_RESETN_SET	(_PRCMU_BASE + 0x1f0)
+#define PRCM_ARM_LS_CLAMP	(_PRCMU_BASE + 0x30c)
+#define PRCM_SRAM_A9		(_PRCMU_BASE + 0x308)
+
+/* ARM WFI Standby signal register */
+#define PRCM_ARM_WFI_STANDBY    (_PRCMU_BASE + 0x130)
+#define PRCMU_IOCR              (_PRCMU_BASE + 0x310)
+
+/* CPU mailbox registers */
+#define PRCM_MBOX_CPU_VAL	(_PRCMU_BASE + 0x0fc)
+#define PRCM_MBOX_CPU_SET	(_PRCMU_BASE + 0x100)
+#define PRCM_MBOX_CPU_CLR	(_PRCMU_BASE + 0x104)
+
+/* Dual A9 core interrupt management unit registers */
+#define PRCM_A9_MASK_REQ	(_PRCMU_BASE + 0x328)
+#define PRCM_A9_MASK_ACK	(_PRCMU_BASE + 0x32c)
+#define PRCM_ARMITMSK31TO0	(_PRCMU_BASE + 0x11c)
+#define PRCM_ARMITMSK63TO32	(_PRCMU_BASE + 0x120)
+#define PRCM_ARMITMSK95TO64	(_PRCMU_BASE + 0x124)
+#define PRCM_ARMITMSK127TO96	(_PRCMU_BASE + 0x128)
+#define PRCM_POWER_STATE_VAL	(_PRCMU_BASE + 0x25C)
+#define PRCM_ARMITVAL31TO0	(_PRCMU_BASE + 0x260)
+#define PRCM_ARMITVAL63TO32	(_PRCMU_BASE + 0x264)
+#define PRCM_ARMITVAL95TO64	(_PRCMU_BASE + 0x268)
+#define PRCM_ARMITVAL127TO96	(_PRCMU_BASE + 0x26C)
+
+#define PRCM_HOSTACCESS_REQ	(_PRCMU_BASE + 0x334)
+#define ARM_WAKEUP_MODEM	0x1
+
+#define PRCM_ARM_IT1_CLEAR	(_PRCMU_BASE + 0x48C)
+#define PRCM_ARM_IT1_VAL	(_PRCMU_BASE + 0x494)
+#define PRCM_HOLD_EVT		(_PRCMU_BASE + 0x174)
+
+#define PRCM_ITSTATUS0		(_PRCMU_BASE + 0x148)
+#define PRCM_ITSTATUS1		(_PRCMU_BASE + 0x150)
+#define PRCM_ITSTATUS2		(_PRCMU_BASE + 0x158)
+#define PRCM_ITSTATUS3		(_PRCMU_BASE + 0x160)
+#define PRCM_ITSTATUS4		(_PRCMU_BASE + 0x168)
+#define PRCM_ITSTATUS5		(_PRCMU_BASE + 0x484)
+#define PRCM_ITCLEAR5		(_PRCMU_BASE + 0x488)
+#define PRCM_ARMIT_MASKXP70_IT	(_PRCMU_BASE + 0x1018)
+
+/* System reset register */
+#define PRCM_APE_SOFTRST	(_PRCMU_BASE + 0x228)
+
+/* Level shifter and clamp control registers */
+#define PRCM_MMIP_LS_CLAMP_SET     (_PRCMU_BASE + 0x420)
+#define PRCM_MMIP_LS_CLAMP_CLR     (_PRCMU_BASE + 0x424)
+
+/* PRCMU clock/PLL/reset registers */
+#define PRCM_PLLDSI_FREQ           (_PRCMU_BASE + 0x500)
+#define PRCM_PLLDSI_ENABLE         (_PRCMU_BASE + 0x504)
+#define PRCM_LCDCLK_MGT            (_PRCMU_BASE + 0x044)
+#define PRCM_MCDECLK_MGT           (_PRCMU_BASE + 0x064)
+#define PRCM_HDMICLK_MGT           (_PRCMU_BASE + 0x058)
+#define PRCM_TVCLK_MGT             (_PRCMU_BASE + 0x07c)
+#define PRCM_DSI_PLLOUT_SEL        (_PRCMU_BASE + 0x530)
+#define PRCM_DSITVCLK_DIV          (_PRCMU_BASE + 0x52C)
+#define PRCM_APE_RESETN_SET        (_PRCMU_BASE + 0x1E4)
+#define PRCM_APE_RESETN_CLR        (_PRCMU_BASE + 0x1E8)
+
+/* ePOD and memory power signal control registers */
+#define PRCM_EPOD_C_SET            (_PRCMU_BASE + 0x410)
+#define PRCM_SRAM_LS_SLEEP         (_PRCMU_BASE + 0x304)
+
+/* Debug power control unit registers */
+#define PRCM_POWER_STATE_SET       (_PRCMU_BASE + 0x254)
+
+/* Miscellaneous unit registers */
+#define PRCM_DSI_SW_RESET          (_PRCMU_BASE + 0x324)
+
+#endif /* __MACH_PRCMU__REGS_H */
diff --git a/arch/arm/mach-ux500/include/mach/prcmu.h b/arch/arm/mach-ux500/include/mach/prcmu.h
new file mode 100644
index 00000000000..549843ff6db
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/prcmu.h
@@ -0,0 +1,15 @@
+/*
+ * Copyright (C) STMicroelectronics 2009
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * PRCMU f/w APIs
+ */
+#ifndef __MACH_PRCMU_H
+#define __MACH_PRCMU_H
+
+int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);
+int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size);
+
+#endif /* __MACH_PRCMU_H */
diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h
index e978dbd9e21..54bbe648bf5 100644
--- a/arch/arm/mach-ux500/include/mach/setup.h
+++ b/arch/arm/mach-ux500/include/mach/setup.h
@@ -38,4 +38,11 @@ extern struct sys_timer ux500_timer;
 	.type		= MT_DEVICE,		\
 }
 
+#define __MEM_DEV_DESC(x, sz)	{		\
+	.virtual	= IO_ADDRESS(x),	\
+	.pfn		= __phys_to_pfn(x),	\
+	.length		= sz,			\
+	.type		= MT_MEMORY,		\
+}
+
 #endif /*  __ASM_ARCH_SETUP_H */
diff --git a/arch/arm/mach-ux500/include/mach/smp.h b/arch/arm/mach-ux500/include/mach/smp.h
index b59f7bc9725..197e8417375 100644
--- a/arch/arm/mach-ux500/include/mach/smp.h
+++ b/arch/arm/mach-ux500/include/mach/smp.h
@@ -10,18 +10,11 @@
 #define ASMARM_ARCH_SMP_H
 
 #include <asm/hardware/gic.h>
+#include <asm/smp_mpidr.h>
 
 /* This is required to wakeup the secondary core */
 extern void u8500_secondary_startup(void);
 
-#define hard_smp_processor_id()				\
-	({						\
-		unsigned int cpunum;			\
-		__asm__("mrc p15, 0, %0, c0, c0, 5"	\
-			: "=r" (cpunum));		\
-		cpunum &= 0x0F;				\
-	})
-
 /*
  * We use IRQ1 as the IPI
  */
diff --git a/arch/arm/mach-ux500/mbox.c b/arch/arm/mach-ux500/mbox.c
new file mode 100644
index 00000000000..63435389c54
--- /dev/null
+++ b/arch/arm/mach-ux500/mbox.c
@@ -0,0 +1,567 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Author: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> for ST-Ericsson.
+ * Author: Martin Persson <martin.persson@stericsson.com> for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2.
+ */
+
+/*
+ * Mailbox nomenclature:
+ *
+ *       APE           MODEM
+ *           mbox pairX
+ *   ..........................
+ *   .                       .
+ *   .           peer        .
+ *   .     send  ----        .
+ *   .      -->  |  |        .
+ *   .           |  |        .
+ *   .           ----        .
+ *   .                       .
+ *   .           local       .
+ *   .     rec   ----        .
+ *   .           |  | <--    .
+ *   .           |  |        .
+ *   .           ----        .
+ *   .........................
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/completion.h>
+#include <mach/mbox.h>
+
+#define MBOX_NAME "mbox"
+
+#define MBOX_FIFO_DATA        0x000
+#define MBOX_FIFO_ADD         0x004
+#define MBOX_FIFO_REMOVE      0x008
+#define MBOX_FIFO_THRES_FREE  0x00C
+#define MBOX_FIFO_THRES_OCCUP 0x010
+#define MBOX_FIFO_STATUS      0x014
+
+#define MBOX_DISABLE_IRQ 0x4
+#define MBOX_ENABLE_IRQ  0x0
+#define MBOX_LATCH 1
+
+/* Global list of all mailboxes */
+static struct list_head mboxs = LIST_HEAD_INIT(mboxs);
+
+static struct mbox *get_mbox_with_id(u8 id)
+{
+	u8 i;
+	struct list_head *pos = &mboxs;
+	for (i = 0; i <= id; i++)
+		pos = pos->next;
+
+	return (struct mbox *) list_entry(pos, struct mbox, list);
+}
+
+int mbox_send(struct mbox *mbox, u32 mbox_msg, bool block)
+{
+	int res = 0;
+
+	spin_lock(&mbox->lock);
+
+	dev_dbg(&(mbox->pdev->dev),
+		"About to buffer 0x%X to mailbox 0x%X."
+		" ri = %d, wi = %d\n",
+		mbox_msg, (u32)mbox, mbox->read_index,
+		mbox->write_index);
+
+	/* Check if write buffer is full */
+	while (((mbox->write_index + 1) % MBOX_BUF_SIZE) == mbox->read_index) {
+		if (!block) {
+			dev_dbg(&(mbox->pdev->dev),
+			"Buffer full in non-blocking call! "
+			"Returning -ENOMEM!\n");
+			res = -ENOMEM;
+			goto exit;
+		}
+		spin_unlock(&mbox->lock);
+		dev_dbg(&(mbox->pdev->dev),
+			"Buffer full in blocking call! Sleeping...\n");
+		mbox->client_blocked = 1;
+		wait_for_completion(&mbox->buffer_available);
+		dev_dbg(&(mbox->pdev->dev),
+			"Blocking send was woken up! Trying again...\n");
+		spin_lock(&mbox->lock);
+	}
+
+	mbox->buffer[mbox->write_index] = mbox_msg;
+	mbox->write_index = (mbox->write_index + 1) % MBOX_BUF_SIZE;
+
+	/*
+	 * Indicate that we want an IRQ as soon as there is a slot
+	 * in the FIFO
+	 */
+	writel(MBOX_ENABLE_IRQ, mbox->virtbase_peer + MBOX_FIFO_THRES_FREE);
+
+exit:
+	spin_unlock(&mbox->lock);
+	return res;
+}
+EXPORT_SYMBOL(mbox_send);
+
+#if defined(CONFIG_DEBUG_FS)
+/*
+ * Expected input: <value> <nbr sends>
+ * Example: "echo 0xdeadbeef 4 > mbox-node" sends 0xdeadbeef 4 times
+ */
+static ssize_t mbox_write_fifo(struct device *dev,
+			       struct device_attribute *attr,
+			       const char *buf,
+			       size_t count)
+{
+	unsigned long mbox_mess;
+	unsigned long nbr_sends;
+	unsigned long i;
+	char int_buf[16];
+	char *token;
+	char *val;
+
+	struct mbox *mbox = (struct mbox *) dev->platform_data;
+
+	strncpy((char *) &int_buf, buf, sizeof(int_buf));
+	token = (char *) &int_buf;
+
+	/* Parse message */
+	val = strsep(&token, " ");
+	if ((val == NULL) || (strict_strtoul(val, 16, &mbox_mess) != 0))
+		mbox_mess = 0xDEADBEEF;
+
+	val = strsep(&token, " ");
+	if ((val == NULL) || (strict_strtoul(val, 10, &nbr_sends) != 0))
+		nbr_sends = 1;
+
+	dev_dbg(dev, "Will write 0x%lX %ld times using data struct at 0x%X\n",
+		mbox_mess, nbr_sends, (u32) mbox);
+
+	for (i = 0; i < nbr_sends; i++)
+		mbox_send(mbox, mbox_mess, true);
+
+	return count;
+}
+
+static ssize_t mbox_read_fifo(struct device *dev,
+			      struct device_attribute *attr,
+			      char *buf)
+{
+	int mbox_value;
+	struct mbox *mbox = (struct mbox *) dev->platform_data;
+
+	if ((readl(mbox->virtbase_local + MBOX_FIFO_STATUS) & 0x7) <= 0)
+		return sprintf(buf, "Mailbox is empty\n");
+
+	mbox_value = readl(mbox->virtbase_local + MBOX_FIFO_DATA);
+	writel(MBOX_LATCH, (mbox->virtbase_local + MBOX_FIFO_REMOVE));
+
+	return sprintf(buf, "0x%X\n", mbox_value);
+}
+
+static DEVICE_ATTR(fifo, S_IWUGO | S_IRUGO, mbox_read_fifo, mbox_write_fifo);
+
+static int mbox_show(struct seq_file *s, void *data)
+{
+	struct list_head *pos;
+	u8 mbox_index = 0;
+
+	list_for_each(pos, &mboxs) {
+		struct mbox *m =
+			(struct mbox *) list_entry(pos, struct mbox, list);
+		if (m == NULL) {
+			seq_printf(s,
+				   "Unable to retrieve mailbox %d\n",
+				   mbox_index);
+			continue;
+		}
+
+		spin_lock(&m->lock);
+		if ((m->virtbase_peer == NULL) || (m->virtbase_local == NULL)) {
+			seq_printf(s, "MAILBOX %d not setup or corrupt\n",
+				   mbox_index);
+			spin_unlock(&m->lock);
+			continue;
+		}
+
+		seq_printf(s,
+		"===========================\n"
+		" MAILBOX %d\n"
+		" PEER MAILBOX DUMP\n"
+		"---------------------------\n"
+		"FIFO:                 0x%X (%d)\n"
+		"Free     Threshold:   0x%.2X (%d)\n"
+		"Occupied Threshold:   0x%.2X (%d)\n"
+		"Status:               0x%.2X (%d)\n"
+		"   Free spaces  (ot):    %d (%d)\n"
+		"   Occup spaces (ot):    %d (%d)\n"
+		"===========================\n"
+		" LOCAL MAILBOX DUMP\n"
+		"---------------------------\n"
+		"FIFO:                 0x%.X (%d)\n"
+		"Free     Threshold:   0x%.2X (%d)\n"
+		"Occupied Threshold:   0x%.2X (%d)\n"
+		"Status:               0x%.2X (%d)\n"
+		"   Free spaces  (ot):    %d (%d)\n"
+		"   Occup spaces (ot):    %d (%d)\n"
+		"===========================\n"
+		"write_index: %d\n"
+		"read_index : %d\n"
+		"===========================\n"
+		"\n",
+		mbox_index,
+		readl(m->virtbase_peer + MBOX_FIFO_DATA),
+		readl(m->virtbase_peer + MBOX_FIFO_DATA),
+		readl(m->virtbase_peer + MBOX_FIFO_THRES_FREE),
+		readl(m->virtbase_peer + MBOX_FIFO_THRES_FREE),
+		readl(m->virtbase_peer + MBOX_FIFO_THRES_OCCUP),
+		readl(m->virtbase_peer + MBOX_FIFO_THRES_OCCUP),
+		readl(m->virtbase_peer + MBOX_FIFO_STATUS),
+		readl(m->virtbase_peer + MBOX_FIFO_STATUS),
+		(readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 4) & 0x7,
+		(readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 7) & 0x1,
+		(readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 0) & 0x7,
+		(readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 3) & 0x1,
+		readl(m->virtbase_local + MBOX_FIFO_DATA),
+		readl(m->virtbase_local + MBOX_FIFO_DATA),
+		readl(m->virtbase_local + MBOX_FIFO_THRES_FREE),
+		readl(m->virtbase_local + MBOX_FIFO_THRES_FREE),
+		readl(m->virtbase_local + MBOX_FIFO_THRES_OCCUP),
+		readl(m->virtbase_local + MBOX_FIFO_THRES_OCCUP),
+		readl(m->virtbase_local + MBOX_FIFO_STATUS),
+		readl(m->virtbase_local + MBOX_FIFO_STATUS),
+		(readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 4) & 0x7,
+		(readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 7) & 0x1,
+		(readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 0) & 0x7,
+		(readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 3) & 0x1,
+		m->write_index, m->read_index);
+		mbox_index++;
+		spin_unlock(&m->lock);
+	}
+
+	return 0;
+}
+
+static int mbox_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, mbox_show, NULL);
+}
+
+static const struct file_operations mbox_operations = {
+	.owner = THIS_MODULE,
+	.open = mbox_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+#endif
+
+static irqreturn_t mbox_irq(int irq, void *arg)
+{
+	u32 mbox_value;
+	int nbr_occup;
+	int nbr_free;
+	struct mbox *mbox = (struct mbox *) arg;
+
+	spin_lock(&mbox->lock);
+
+	dev_dbg(&(mbox->pdev->dev),
+		"mbox IRQ [%d] received. ri = %d, wi = %d\n",
+		irq, mbox->read_index, mbox->write_index);
+
+	/*
+	 * Check if we have any outgoing messages, and if there is space for
+	 * them in the FIFO.
+	 */
+	if (mbox->read_index != mbox->write_index) {
+		/*
+		 * Check by reading FREE for LOCAL since that indicates
+		 * OCCUP for PEER
+		 */
+		nbr_free = (readl(mbox->virtbase_local + MBOX_FIFO_STATUS)
+			    >> 4) & 0x7;
+		dev_dbg(&(mbox->pdev->dev),
+			"Status indicates %d empty spaces in the FIFO!\n",
+			nbr_free);
+
+		while ((nbr_free > 0) &&
+		       (mbox->read_index != mbox->write_index)) {
+			/* Write the message and latch it into the FIFO */
+			writel(mbox->buffer[mbox->read_index],
+			       (mbox->virtbase_peer + MBOX_FIFO_DATA));
+			writel(MBOX_LATCH,
+			       (mbox->virtbase_peer + MBOX_FIFO_ADD));
+			dev_dbg(&(mbox->pdev->dev),
+				"Wrote message 0x%X to addr 0x%X\n",
+				mbox->buffer[mbox->read_index],
+				(u32) (mbox->virtbase_peer + MBOX_FIFO_DATA));
+
+			nbr_free--;
+			mbox->read_index =
+				(mbox->read_index + 1) % MBOX_BUF_SIZE;
+		}
+
+		/*
+		 * Check if we still want IRQ:s when there is free
+		 * space to send
+		 */
+		if (mbox->read_index != mbox->write_index) {
+			dev_dbg(&(mbox->pdev->dev),
+				"Still have messages to send, but FIFO full. "
+				"Request IRQ again!\n");
+			writel(MBOX_ENABLE_IRQ,
+			       mbox->virtbase_peer + MBOX_FIFO_THRES_FREE);
+		} else {
+			dev_dbg(&(mbox->pdev->dev),
+				"No more messages to send. "
+				"Do not request IRQ again!\n");
+			writel(MBOX_DISABLE_IRQ,
+			       mbox->virtbase_peer + MBOX_FIFO_THRES_FREE);
+		}
+
+		/*
+		 * Check if we can signal any blocked clients that it is OK to
+		 * start buffering again
+		 */
+		if (mbox->client_blocked &&
+		    (((mbox->write_index + 1) % MBOX_BUF_SIZE)
+		     != mbox->read_index)) {
+			dev_dbg(&(mbox->pdev->dev),
+				"Waking up blocked client\n");
+			complete(&mbox->buffer_available);
+			mbox->client_blocked = 0;
+		}
+	}
+
+	/* Check if we have any incoming messages */
+	nbr_occup = readl(mbox->virtbase_local + MBOX_FIFO_STATUS) & 0x7;
+	if (nbr_occup == 0)
+		goto exit;
+
+	if (mbox->cb == NULL) {
+		dev_dbg(&(mbox->pdev->dev), "No receive callback registered, "
+			"leaving %d incoming messages in fifo!\n", nbr_occup);
+		goto exit;
+	}
+
+	/* Read and acknowledge the message */
+	mbox_value = readl(mbox->virtbase_local + MBOX_FIFO_DATA);
+	writel(MBOX_LATCH, (mbox->virtbase_local + MBOX_FIFO_REMOVE));
+
+	/* Notify consumer of new mailbox message */
+	dev_dbg(&(mbox->pdev->dev), "Calling callback for message 0x%X!\n",
+		mbox_value);
+	mbox->cb(mbox_value, mbox->client_data);
+
+exit:
+	dev_dbg(&(mbox->pdev->dev), "Exit mbox IRQ. ri = %d, wi = %d\n",
+		mbox->read_index, mbox->write_index);
+	spin_unlock(&mbox->lock);
+
+	return IRQ_HANDLED;
+}
+
+/* Setup is executed once for each mbox pair */
+struct mbox *mbox_setup(u8 mbox_id, mbox_recv_cb_t *mbox_cb, void *priv)
+{
+	struct resource *resource;
+	int irq;
+	int res;
+	struct mbox *mbox;
+
+	mbox = get_mbox_with_id(mbox_id);
+	if (mbox == NULL) {
+		dev_err(&(mbox->pdev->dev), "Incorrect mailbox id: %d!\n",
+			mbox_id);
+		goto exit;
+	}
+
+	/*
+	 * Check if mailbox has been allocated to someone else,
+	 * otherwise allocate it
+	 */
+	if (mbox->allocated) {
+		dev_err(&(mbox->pdev->dev), "Mailbox number %d is busy!\n",
+			mbox_id);
+		mbox = NULL;
+		goto exit;
+	}
+	mbox->allocated = true;
+
+	dev_dbg(&(mbox->pdev->dev), "Initiating mailbox number %d: 0x%X...\n",
+		mbox_id, (u32)mbox);
+
+	mbox->client_data = priv;
+	mbox->cb = mbox_cb;
+
+	/* Get addr for peer mailbox and ioremap it */
+	resource = platform_get_resource_byname(mbox->pdev,
+						IORESOURCE_MEM,
+						"mbox_peer");
+	if (resource == NULL) {
+		dev_err(&(mbox->pdev->dev),
+			"Unable to retrieve mbox peer resource\n");
+		mbox = NULL;
+		goto exit;
+	}
+	dev_dbg(&(mbox->pdev->dev),
+		"Resource name: %s start: 0x%X, end: 0x%X\n",
+		resource->name, resource->start, resource->end);
+	mbox->virtbase_peer =
+		ioremap(resource->start, resource->end - resource->start);
+	if (!mbox->virtbase_peer) {
+		dev_err(&(mbox->pdev->dev), "Unable to ioremap peer mbox\n");
+		mbox = NULL;
+		goto exit;
+	}
+	dev_dbg(&(mbox->pdev->dev),
+		"ioremapped peer physical: (0x%X-0x%X) to virtual: 0x%X\n",
+		resource->start, resource->end, (u32) mbox->virtbase_peer);
+
+	/* Get addr for local mailbox and ioremap it */
+	resource = platform_get_resource_byname(mbox->pdev,
+						IORESOURCE_MEM,
+						"mbox_local");
+	if (resource == NULL) {
+		dev_err(&(mbox->pdev->dev),
+			"Unable to retrieve mbox local resource\n");
+		mbox = NULL;
+		goto exit;
+	}
+	dev_dbg(&(mbox->pdev->dev),
+		"Resource name: %s start: 0x%X, end: 0x%X\n",
+		resource->name, resource->start, resource->end);
+	mbox->virtbase_local =
+		ioremap(resource->start, resource->end - resource->start);
+	if (!mbox->virtbase_local) {
+		dev_err(&(mbox->pdev->dev), "Unable to ioremap local mbox\n");
+		mbox = NULL;
+		goto exit;
+	}
+	dev_dbg(&(mbox->pdev->dev),
+		"ioremapped local physical: (0x%X-0x%X) to virtual: 0x%X\n",
+		resource->start, resource->end, (u32) mbox->virtbase_peer);
+
+	init_completion(&mbox->buffer_available);
+	mbox->client_blocked = 0;
+
+	/* Get IRQ for mailbox and allocate it */
+	irq = platform_get_irq_byname(mbox->pdev, "mbox_irq");
+	if (irq < 0) {
+		dev_err(&(mbox->pdev->dev),
+			"Unable to retrieve mbox irq resource\n");
+		mbox = NULL;
+		goto exit;
+	}
+
+	dev_dbg(&(mbox->pdev->dev), "Allocating irq %d...\n", irq);
+	res = request_irq(irq, mbox_irq, 0, mbox->name, (void *) mbox);
+	if (res < 0) {
+		dev_err(&(mbox->pdev->dev),
+			"Unable to allocate mbox irq %d\n", irq);
+		mbox = NULL;
+		goto exit;
+	}
+
+	/* Set up mailbox to not launch IRQ on free space in mailbox */
+	writel(MBOX_DISABLE_IRQ, mbox->virtbase_peer + MBOX_FIFO_THRES_FREE);
+
+	/*
+	 * Set up mailbox to launch IRQ on new message if we have
+	 * a callback set. If not, do not raise IRQ, but keep message
+	 * in FIFO for manual retrieval
+	 */
+	if (mbox_cb != NULL)
+		writel(MBOX_ENABLE_IRQ,
+		       mbox->virtbase_local + MBOX_FIFO_THRES_OCCUP);
+	else
+		writel(MBOX_DISABLE_IRQ,
+		       mbox->virtbase_local + MBOX_FIFO_THRES_OCCUP);
+
+#if defined(CONFIG_DEBUG_FS)
+	res = device_create_file(&(mbox->pdev->dev), &dev_attr_fifo);
+	if (res != 0)
+		dev_warn(&(mbox->pdev->dev),
+			 "Unable to create mbox sysfs entry");
+
+	(void) debugfs_create_file("mbox", S_IFREG | S_IRUGO, NULL,
+				   NULL, &mbox_operations);
+#endif
+
+	dev_info(&(mbox->pdev->dev),
+		 "Mailbox driver with index %d initated!\n", mbox_id);
+
+exit:
+	return mbox;
+}
+EXPORT_SYMBOL(mbox_setup);
+
+
+int __init mbox_probe(struct platform_device *pdev)
+{
+	struct mbox local_mbox;
+	struct mbox *mbox;
+	int res = 0;
+	dev_dbg(&(pdev->dev), "Probing mailbox (pdev = 0x%X)...\n", (u32) pdev);
+
+	memset(&local_mbox, 0x0, sizeof(struct mbox));
+
+	/* Associate our mbox data with the platform device */
+	res = platform_device_add_data(pdev,
+				       (void *) &local_mbox,
+				       sizeof(struct mbox));
+	if (res != 0) {
+		dev_err(&(pdev->dev),
+			"Unable to allocate driver platform data!\n");
+		goto exit;
+	}
+
+	mbox = (struct mbox *) pdev->dev.platform_data;
+	mbox->pdev = pdev;
+	mbox->write_index = 0;
+	mbox->read_index = 0;
+
+	INIT_LIST_HEAD(&(mbox->list));
+	list_add_tail(&(mbox->list), &mboxs);
+
+	sprintf(mbox->name, "%s", MBOX_NAME);
+	spin_lock_init(&mbox->lock);
+
+	dev_info(&(pdev->dev), "Mailbox driver loaded\n");
+
+exit:
+	return res;
+}
+
+static struct platform_driver mbox_driver = {
+	.driver = {
+		.name = MBOX_NAME,
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init mbox_init(void)
+{
+	return platform_driver_probe(&mbox_driver, mbox_probe);
+}
+
+module_init(mbox_init);
+
+void __exit mbox_exit(void)
+{
+	platform_driver_unregister(&mbox_driver);
+}
+
+module_exit(mbox_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("MBOX driver");
diff --git a/arch/arm/mach-ux500/modem_irq.c b/arch/arm/mach-ux500/modem_irq.c
new file mode 100644
index 00000000000..3187f887116
--- /dev/null
+++ b/arch/arm/mach-ux500/modem_irq.c
@@ -0,0 +1,139 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Author: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> for ST-Ericsson.
+ * Author: Martin Persson <martin.persson@stericsson.com> for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+
+#define MODEM_INTCON_BASE_ADDR 0xBFFD3000
+#define MODEM_INTCON_SIZE 0xFFF
+
+#define DEST_IRQ41_OFFSET 0x2A4
+#define DEST_IRQ43_OFFSET 0x2AC
+#define DEST_IRQ45_OFFSET 0x2B4
+
+#define PRIO_IRQ41_OFFSET 0x6A4
+#define PRIO_IRQ43_OFFSET 0x6AC
+#define PRIO_IRQ45_OFFSET 0x6B4
+
+#define ALLOW_IRQ_OFFSET 0x104
+
+#define MODEM_INTCON_CPU_NBR 0x1
+#define MODEM_INTCON_PRIO_HIGH 0x0
+
+#define MODEM_INTCON_ALLOW_IRQ41 0x0200
+#define MODEM_INTCON_ALLOW_IRQ43 0x0800
+#define MODEM_INTCON_ALLOW_IRQ45 0x2000
+
+#define MODEM_IRQ_REG_OFFSET 0x4
+
+struct modem_irq {
+	void __iomem *modem_intcon_base;
+};
+
+
+static void setup_modem_intcon(void __iomem *modem_intcon_base)
+{
+	/* IC_DESTINATION_BASE_ARRAY - Which CPU to receive the IRQ */
+	writel(MODEM_INTCON_CPU_NBR, modem_intcon_base + DEST_IRQ41_OFFSET);
+	writel(MODEM_INTCON_CPU_NBR, modem_intcon_base + DEST_IRQ43_OFFSET);
+	writel(MODEM_INTCON_CPU_NBR, modem_intcon_base + DEST_IRQ45_OFFSET);
+
+	/* IC_PRIORITY_BASE_ARRAY - IRQ priority in modem IRQ controller */
+	writel(MODEM_INTCON_PRIO_HIGH, modem_intcon_base + PRIO_IRQ41_OFFSET);
+	writel(MODEM_INTCON_PRIO_HIGH, modem_intcon_base + PRIO_IRQ43_OFFSET);
+	writel(MODEM_INTCON_PRIO_HIGH, modem_intcon_base + PRIO_IRQ45_OFFSET);
+
+	/* IC_ALLOW_ARRAY - IRQ enable */
+	writel(MODEM_INTCON_ALLOW_IRQ41 |
+		   MODEM_INTCON_ALLOW_IRQ43 |
+		   MODEM_INTCON_ALLOW_IRQ45,
+		   modem_intcon_base + ALLOW_IRQ_OFFSET);
+}
+
+static irqreturn_t modem_cpu_irq_handler(int irq, void *data)
+{
+	int real_irq;
+	int virt_irq;
+	struct modem_irq *mi = (struct modem_irq *)data;
+
+	/* Read modem side IRQ number from modem IRQ controller */
+	real_irq = readl(mi->modem_intcon_base + MODEM_IRQ_REG_OFFSET) & 0xFF;
+	virt_irq = IRQ_MODEM_EVENTS_BASE + real_irq;
+
+	pr_debug("modem_irq: Worker read addr 0x%X and got value 0x%X "
+		 "which will be 0x%X (%d) which translates to "
+		 "virtual IRQ 0x%X (%d)!\n",
+		   (u32)mi->modem_intcon_base + MODEM_IRQ_REG_OFFSET,
+		   real_irq,
+		   real_irq & 0xFF,
+		   real_irq & 0xFF,
+		   virt_irq,
+		   virt_irq);
+
+	if (virt_irq != 0)
+		generic_handle_irq(virt_irq);
+
+	pr_debug("modem_irq: Done handling virtual IRQ %d!\n", virt_irq);
+
+	return IRQ_HANDLED;
+}
+
+static void create_virtual_irq(int irq, struct irq_chip *modem_irq_chip)
+{
+	set_irq_chip(irq, modem_irq_chip);
+	set_irq_handler(irq, handle_simple_irq);
+	set_irq_flags(irq, IRQF_VALID);
+
+	pr_debug("modem_irq: Created virtual IRQ %d\n", irq);
+}
+
+static int modem_irq_init(void)
+{
+	int err;
+	static struct irq_chip  modem_irq_chip;
+	struct modem_irq *mi;
+
+	pr_info("modem_irq: Set up IRQ handler for incoming modem IRQ %d\n",
+		   IRQ_DB5500_MODEM);
+
+	mi = kmalloc(sizeof(struct modem_irq), GFP_KERNEL);
+	if (!mi) {
+		pr_err("modem_irq: Could not allocate device\n");
+		return -ENOMEM;
+	}
+
+	mi->modem_intcon_base =
+		ioremap(MODEM_INTCON_BASE_ADDR, MODEM_INTCON_SIZE);
+	pr_debug("modem_irq: ioremapped modem_intcon_base from "
+		 "phy 0x%x to virt 0x%x\n", MODEM_INTCON_BASE_ADDR,
+		 (u32)mi->modem_intcon_base);
+
+	setup_modem_intcon(mi->modem_intcon_base);
+
+	modem_irq_chip = dummy_irq_chip;
+	modem_irq_chip.name = "modem_irq";
+
+	/* Create the virtual IRQ:s needed */
+	create_virtual_irq(MBOX_PAIR0_VIRT_IRQ, &modem_irq_chip);
+	create_virtual_irq(MBOX_PAIR1_VIRT_IRQ, &modem_irq_chip);
+	create_virtual_irq(MBOX_PAIR2_VIRT_IRQ, &modem_irq_chip);
+
+	err = request_threaded_irq(IRQ_DB5500_MODEM, NULL,
+				   modem_cpu_irq_handler, IRQF_ONESHOT,
+				   "modem_irq", mi);
+	if (err)
+		pr_err("modem_irq: Could not register IRQ %d\n",
+		       IRQ_DB5500_MODEM);
+
+	return 0;
+}
+
+arch_initcall(modem_irq_init);
diff --git a/arch/arm/mach-ux500/pins-db5500.h b/arch/arm/mach-ux500/pins-db5500.h
new file mode 100644
index 00000000000..bf50c21fe69
--- /dev/null
+++ b/arch/arm/mach-ux500/pins-db5500.h
@@ -0,0 +1,620 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License terms: GNU General Public License, version 2
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com>
+ */
+
+#ifndef __MACH_DB5500_PINS_H
+#define __MACH_DB5500_PINS_H
+
+#define GPIO0_GPIO		PIN_CFG(0, GPIO)
+#define GPIO0_SM_CS3n		PIN_CFG(0, ALT_A)
+
+#define GPIO1_GPIO		PIN_CFG(1, GPIO)
+#define GPIO1_SM_A3		PIN_CFG(1, ALT_A)
+
+#define GPIO2_GPIO		PIN_CFG(2, GPIO)
+#define GPIO2_SM_A4		PIN_CFG(2, ALT_A)
+#define GPIO2_SM_AVD		PIN_CFG(2, ALT_B)
+
+#define GPIO3_GPIO		PIN_CFG(3, GPIO)
+#define GPIO3_I2C1_SCL		PIN_CFG(3, ALT_A)
+
+#define GPIO4_GPIO		PIN_CFG(4, GPIO)
+#define GPIO4_I2C1_SDA		PIN_CFG(4, ALT_A)
+
+#define GPIO5_GPIO		PIN_CFG(5, GPIO)
+#define GPIO5_MC0_DAT0		PIN_CFG(5, ALT_A)
+#define GPIO5_SM_ADQ8		PIN_CFG(5, ALT_B)
+
+#define GPIO6_GPIO		PIN_CFG(6, GPIO)
+#define GPIO6_MC0_DAT1		PIN_CFG(6, ALT_A)
+#define GPIO6_SM_ADQ0		PIN_CFG(6, ALT_B)
+
+#define GPIO7_GPIO		PIN_CFG(7, GPIO)
+#define GPIO7_MC0_DAT2		PIN_CFG(7, ALT_A)
+#define GPIO7_SM_ADQ9		PIN_CFG(7, ALT_B)
+
+#define GPIO8_GPIO		PIN_CFG(8, GPIO)
+#define GPIO8_MC0_DAT3		PIN_CFG(8, ALT_A)
+#define GPIO8_SM_ADQ1		PIN_CFG(8, ALT_B)
+
+#define GPIO9_GPIO		PIN_CFG(9, GPIO)
+#define GPIO9_MC0_DAT4		PIN_CFG(9, ALT_A)
+#define GPIO9_SM_ADQ10		PIN_CFG(9, ALT_B)
+
+#define GPIO10_GPIO		PIN_CFG(10, GPIO)
+#define GPIO10_MC0_DAT5		PIN_CFG(10, ALT_A)
+#define GPIO10_SM_ADQ2		PIN_CFG(10, ALT_B)
+
+#define GPIO11_GPIO		PIN_CFG(11, GPIO)
+#define GPIO11_MC0_DAT6		PIN_CFG(11, ALT_A)
+#define GPIO11_SM_ADQ11		PIN_CFG(11, ALT_B)
+
+#define GPIO12_GPIO		PIN_CFG(12, GPIO)
+#define GPIO12_MC0_DAT7		PIN_CFG(12, ALT_A)
+#define GPIO12_SM_ADQ3		PIN_CFG(12, ALT_B)
+
+#define GPIO13_GPIO		PIN_CFG(13, GPIO)
+#define GPIO13_MC0_CMD		PIN_CFG(13, ALT_A)
+#define GPIO13_SM_BUSY0n	PIN_CFG(13, ALT_B)
+#define GPIO13_SM_WAIT0n	PIN_CFG(13, ALT_C)
+
+#define GPIO14_GPIO		PIN_CFG(14, GPIO)
+#define GPIO14_MC0_CLK		PIN_CFG(14, ALT_A)
+#define GPIO14_SM_CS1n		PIN_CFG(14, ALT_B)
+#define GPIO14_SM_CKO		PIN_CFG(14, ALT_C)
+
+#define GPIO15_GPIO		PIN_CFG(15, GPIO)
+#define GPIO15_SM_A5		PIN_CFG(15, ALT_A)
+#define GPIO15_SM_CLE		PIN_CFG(15, ALT_B)
+
+#define GPIO16_GPIO		PIN_CFG(16, GPIO)
+#define GPIO16_MC2_CMD		PIN_CFG(16, ALT_A)
+#define GPIO16_SM_OEn		PIN_CFG(16, ALT_B)
+
+#define GPIO17_GPIO		PIN_CFG(17, GPIO)
+#define GPIO17_MC2_CLK		PIN_CFG(17, ALT_A)
+#define GPIO17_SM_WEn		PIN_CFG(17, ALT_B)
+
+#define GPIO18_GPIO		PIN_CFG(18, GPIO)
+#define GPIO18_SM_A6		PIN_CFG(18, ALT_A)
+#define GPIO18_SM_ALE		PIN_CFG(18, ALT_B)
+#define GPIO18_SM_AVDn		PIN_CFG(18, ALT_C)
+
+#define GPIO19_GPIO		PIN_CFG(19, GPIO)
+#define GPIO19_MC2_DAT1		PIN_CFG(19, ALT_A)
+#define GPIO19_SM_ADQ4		PIN_CFG(19, ALT_B)
+
+#define GPIO20_GPIO		PIN_CFG(20, GPIO)
+#define GPIO20_MC2_DAT3		PIN_CFG(20, ALT_A)
+#define GPIO20_SM_ADQ5		PIN_CFG(20, ALT_B)
+
+#define GPIO21_GPIO		PIN_CFG(21, GPIO)
+#define GPIO21_MC2_DAT5		PIN_CFG(21, ALT_A)
+#define GPIO21_SM_ADQ6		PIN_CFG(21, ALT_B)
+
+#define GPIO22_GPIO		PIN_CFG(22, GPIO)
+#define GPIO22_MC2_DAT7		PIN_CFG(22, ALT_A)
+#define GPIO22_SM_ADQ7		PIN_CFG(22, ALT_B)
+
+#define GPIO23_GPIO		PIN_CFG(23, GPIO)
+#define GPIO23_MC2_DAT0		PIN_CFG(23, ALT_A)
+#define GPIO23_SM_ADQ12		PIN_CFG(23, ALT_B)
+#define GPIO23_MC0_DAT1		PIN_CFG(23, ALT_C)
+
+#define GPIO24_GPIO		PIN_CFG(24, GPIO)
+#define GPIO24_MC2_DAT2		PIN_CFG(24, ALT_A)
+#define GPIO24_SM_ADQ13		PIN_CFG(24, ALT_B)
+#define GPIO24_MC0_DAT3		PIN_CFG(24, ALT_C)
+
+#define GPIO25_GPIO		PIN_CFG(25, GPIO)
+#define GPIO25_MC2_DAT4		PIN_CFG(25, ALT_A)
+#define GPIO25_SM_ADQ14		PIN_CFG(25, ALT_B)
+#define GPIO25_MC0_CMD		PIN_CFG(25, ALT_C)
+
+#define GPIO26_GPIO		PIN_CFG(26, GPIO)
+#define GPIO26_MC2_DAT6		PIN_CFG(26, ALT_A)
+#define GPIO26_SM_ADQ15		PIN_CFG(26, ALT_B)
+
+#define GPIO27_GPIO		PIN_CFG(27, GPIO)
+#define GPIO27_SM_CS0n		PIN_CFG(27, ALT_A)
+#define GPIO27_SM_PS0n		PIN_CFG(27, ALT_B)
+
+#define GPIO28_GPIO		PIN_CFG(28, GPIO)
+#define GPIO28_U0_TXD		PIN_CFG(28, ALT_A)
+#define GPIO28_SM_A0		PIN_CFG(28, ALT_B)
+
+#define GPIO29_GPIO		PIN_CFG(29, GPIO)
+#define GPIO29_U0_RXD		PIN_CFG(29, ALT_A)
+#define GPIO29_SM_A1		PIN_CFG(29, ALT_B)
+#define GPIO29_PWM_0		PIN_CFG(29, ALT_C)
+
+#define GPIO30_GPIO		PIN_CFG(30, GPIO)
+#define GPIO30_MC0_DAT5		PIN_CFG(30, ALT_A)
+#define GPIO30_SM_A2		PIN_CFG(30, ALT_B)
+#define GPIO30_PWM_1		PIN_CFG(30, ALT_C)
+
+#define GPIO31_GPIO		PIN_CFG(31, GPIO)
+#define GPIO31_MC0_DAT7		PIN_CFG(31, ALT_A)
+#define GPIO31_SM_CS2n		PIN_CFG(31, ALT_B)
+#define GPIO31_PWM_2		PIN_CFG(31, ALT_C)
+
+#define GPIO32_GPIO		PIN_CFG(32, GPIO)
+#define GPIO32_MSP0_TCK		PIN_CFG(32, ALT_A)
+#define GPIO32_ACCI2S0_SCK	PIN_CFG(32, ALT_B)
+
+#define GPIO33_GPIO		PIN_CFG(33, GPIO)
+#define GPIO33_MSP0_TFS		PIN_CFG(33, ALT_A)
+#define GPIO33_ACCI2S0_WS	PIN_CFG(33, ALT_B)
+
+#define GPIO34_GPIO		PIN_CFG(34, GPIO)
+#define GPIO34_MSP0_TXD		PIN_CFG(34, ALT_A)
+#define GPIO34_ACCI2S0_DLD	PIN_CFG(34, ALT_B)
+
+#define GPIO35_GPIO		PIN_CFG(35, GPIO)
+#define GPIO35_MSP0_RXD		PIN_CFG(35, ALT_A)
+#define GPIO35_ACCI2S0_ULD	PIN_CFG(35, ALT_B)
+
+#define GPIO64_GPIO		PIN_CFG(64, GPIO)
+#define GPIO64_USB_DAT0		PIN_CFG(64, ALT_A)
+#define GPIO64_U0_TXD		PIN_CFG(64, ALT_B)
+
+#define GPIO65_GPIO		PIN_CFG(65, GPIO)
+#define GPIO65_USB_DAT1		PIN_CFG(65, ALT_A)
+#define GPIO65_U0_RXD		PIN_CFG(65, ALT_B)
+
+#define GPIO66_GPIO		PIN_CFG(66, GPIO)
+#define GPIO66_USB_DAT2		PIN_CFG(66, ALT_A)
+
+#define GPIO67_GPIO		PIN_CFG(67, GPIO)
+#define GPIO67_USB_DAT3		PIN_CFG(67, ALT_A)
+
+#define GPIO68_GPIO		PIN_CFG(68, GPIO)
+#define GPIO68_USB_DAT4		PIN_CFG(68, ALT_A)
+
+#define GPIO69_GPIO		PIN_CFG(69, GPIO)
+#define GPIO69_USB_DAT5		PIN_CFG(69, ALT_A)
+
+#define GPIO70_GPIO		PIN_CFG(70, GPIO)
+#define GPIO70_USB_DAT6		PIN_CFG(70, ALT_A)
+
+#define GPIO71_GPIO		PIN_CFG(71, GPIO)
+#define GPIO71_USB_DAT7		PIN_CFG(71, ALT_A)
+
+#define GPIO72_GPIO		PIN_CFG(72, GPIO)
+#define GPIO72_USB_STP		PIN_CFG(72, ALT_A)
+
+#define GPIO73_GPIO		PIN_CFG(73, GPIO)
+#define GPIO73_USB_DIR		PIN_CFG(73, ALT_A)
+
+#define GPIO74_GPIO		PIN_CFG(74, GPIO)
+#define GPIO74_USB_NXT		PIN_CFG(74, ALT_A)
+
+#define GPIO75_GPIO		PIN_CFG(75, GPIO)
+#define GPIO75_USB_XCLK		PIN_CFG(75, ALT_A)
+
+#define GPIO76_GPIO		PIN_CFG(76, GPIO)
+
+#define GPIO77_GPIO		PIN_CFG(77, GPIO)
+#define GPIO77_ACCTX_ON		PIN_CFG(77, ALT_A)
+
+#define GPIO78_GPIO		PIN_CFG(78, GPIO)
+#define GPIO78_IRQn		PIN_CFG(78, ALT_A)
+
+#define GPIO79_GPIO		PIN_CFG(79, GPIO)
+#define GPIO79_ACCSIM_Clk	PIN_CFG(79, ALT_A)
+
+#define GPIO80_GPIO		PIN_CFG(80, GPIO)
+#define GPIO80_ACCSIM_Da	PIN_CFG(80, ALT_A)
+
+#define GPIO81_GPIO		PIN_CFG(81, GPIO)
+#define GPIO81_ACCSIM_Reset	PIN_CFG(81, ALT_A)
+
+#define GPIO82_GPIO		PIN_CFG(82, GPIO)
+#define GPIO82_ACCSIM_DDir	PIN_CFG(82, ALT_A)
+
+#define GPIO96_GPIO		PIN_CFG(96, GPIO)
+#define GPIO96_MSP1_TCK		PIN_CFG(96, ALT_A)
+#define GPIO96_PRCMU_DEBUG3	PIN_CFG(96, ALT_B)
+#define GPIO96_PRCMU_DEBUG7	PIN_CFG(96, ALT_C)
+
+#define GPIO97_GPIO		PIN_CFG(97, GPIO)
+#define GPIO97_MSP1_TFS		PIN_CFG(97, ALT_A)
+#define GPIO97_PRCMU_DEBUG2	PIN_CFG(97, ALT_B)
+#define GPIO97_PRCMU_DEBUG6	PIN_CFG(97, ALT_C)
+
+#define GPIO98_GPIO		PIN_CFG(98, GPIO)
+#define GPIO98_MSP1_TXD		PIN_CFG(98, ALT_A)
+#define GPIO98_PRCMU_DEBUG1	PIN_CFG(98, ALT_B)
+#define GPIO98_PRCMU_DEBUG5	PIN_CFG(98, ALT_C)
+
+#define GPIO99_GPIO		PIN_CFG(99, GPIO)
+#define GPIO99_MSP1_RXD		PIN_CFG(99, ALT_A)
+#define GPIO99_PRCMU_DEBUG0	PIN_CFG(99, ALT_B)
+#define GPIO99_PRCMU_DEBUG4	PIN_CFG(99, ALT_C)
+
+#define GPIO100_GPIO		PIN_CFG(100, GPIO)
+#define GPIO100_I2C0_SCL	PIN_CFG(100, ALT_A)
+
+#define GPIO101_GPIO		PIN_CFG(101, GPIO)
+#define GPIO101_I2C0_SDA	PIN_CFG(101, ALT_A)
+
+#define GPIO128_GPIO		PIN_CFG(128, GPIO)
+#define GPIO128_KP_I0		PIN_CFG(128, ALT_A)
+#define GPIO128_BUSMON_D0	PIN_CFG(128, ALT_B)
+
+#define GPIO129_GPIO		PIN_CFG(129, GPIO)
+#define GPIO129_KP_O0		PIN_CFG(129, ALT_A)
+#define GPIO129_BUSMON_D1	PIN_CFG(129, ALT_B)
+
+#define GPIO130_GPIO		PIN_CFG(130, GPIO)
+#define GPIO130_KP_I1		PIN_CFG(130, ALT_A)
+#define GPIO130_BUSMON_D2	PIN_CFG(130, ALT_B)
+
+#define GPIO131_GPIO		PIN_CFG(131, GPIO)
+#define GPIO131_KP_O1		PIN_CFG(131, ALT_A)
+#define GPIO131_BUSMON_D3	PIN_CFG(131, ALT_B)
+
+#define GPIO132_GPIO		PIN_CFG(132, GPIO)
+#define GPIO132_KP_I2		PIN_CFG(132, ALT_A)
+#define GPIO132_ETM_D15		PIN_CFG(132, ALT_B)
+#define GPIO132_STMAPE_CLK	PIN_CFG(132, ALT_C)
+
+#define GPIO133_GPIO		PIN_CFG(133, GPIO)
+#define GPIO133_KP_O2		PIN_CFG(133, ALT_A)
+#define GPIO133_ETM_D14		PIN_CFG(133, ALT_B)
+#define GPIO133_U0_RXD		PIN_CFG(133, ALT_C)
+
+#define GPIO134_GPIO		PIN_CFG(134, GPIO)
+#define GPIO134_KP_I3		PIN_CFG(134, ALT_A)
+#define GPIO134_ETM_D13		PIN_CFG(134, ALT_B)
+#define GPIO134_STMAPE_DAT0	PIN_CFG(134, ALT_C)
+
+#define GPIO135_GPIO		PIN_CFG(135, GPIO)
+#define GPIO135_KP_O3		PIN_CFG(135, ALT_A)
+#define GPIO135_ETM_D12		PIN_CFG(135, ALT_B)
+#define GPIO135_STMAPE_DAT1	PIN_CFG(135, ALT_C)
+
+#define GPIO136_GPIO		PIN_CFG(136, GPIO)
+#define GPIO136_KP_I4		PIN_CFG(136, ALT_A)
+#define GPIO136_ETM_D11		PIN_CFG(136, ALT_B)
+#define GPIO136_STMAPE_DAT2	PIN_CFG(136, ALT_C)
+
+#define GPIO137_GPIO		PIN_CFG(137, GPIO)
+#define GPIO137_KP_O4		PIN_CFG(137, ALT_A)
+#define GPIO137_ETM_D10		PIN_CFG(137, ALT_B)
+#define GPIO137_STMAPE_DAT3	PIN_CFG(137, ALT_C)
+
+#define GPIO138_GPIO		PIN_CFG(138, GPIO)
+#define GPIO138_KP_I5		PIN_CFG(138, ALT_A)
+#define GPIO138_ETM_D9		PIN_CFG(138, ALT_B)
+#define GPIO138_U0_TXD		PIN_CFG(138, ALT_C)
+
+#define GPIO139_GPIO		PIN_CFG(139, GPIO)
+#define GPIO139_KP_O5		PIN_CFG(139, ALT_A)
+#define GPIO139_ETM_D8		PIN_CFG(139, ALT_B)
+#define GPIO139_BUSMON_D11	PIN_CFG(139, ALT_C)
+
+#define GPIO140_GPIO		PIN_CFG(140, GPIO)
+#define GPIO140_KP_I6		PIN_CFG(140, ALT_A)
+#define GPIO140_ETM_D7		PIN_CFG(140, ALT_B)
+#define GPIO140_STMAPE_CLK	PIN_CFG(140, ALT_C)
+
+#define GPIO141_GPIO		PIN_CFG(141, GPIO)
+#define GPIO141_KP_O6		PIN_CFG(141, ALT_A)
+#define GPIO141_ETM_D6		PIN_CFG(141, ALT_B)
+#define GPIO141_U0_RXD		PIN_CFG(141, ALT_C)
+
+#define GPIO142_GPIO		PIN_CFG(142, GPIO)
+#define GPIO142_KP_I7		PIN_CFG(142, ALT_A)
+#define GPIO142_ETM_D5		PIN_CFG(142, ALT_B)
+#define GPIO142_STMAPE_DAT0	PIN_CFG(142, ALT_C)
+
+#define GPIO143_GPIO		PIN_CFG(143, GPIO)
+#define GPIO143_KP_O7		PIN_CFG(143, ALT_A)
+#define GPIO143_ETM_D4		PIN_CFG(143, ALT_B)
+#define GPIO143_STMAPE_DAT1	PIN_CFG(143, ALT_C)
+
+#define GPIO144_GPIO		PIN_CFG(144, GPIO)
+#define GPIO144_I2C3_SCL	PIN_CFG(144, ALT_A)
+#define GPIO144_ETM_D3		PIN_CFG(144, ALT_B)
+#define GPIO144_STMAPE_DAT2	PIN_CFG(144, ALT_C)
+
+#define GPIO145_GPIO		PIN_CFG(145, GPIO)
+#define GPIO145_I2C3_SDA	PIN_CFG(145, ALT_A)
+#define GPIO145_ETM_D2		PIN_CFG(145, ALT_B)
+#define GPIO145_STMAPE_DAT3	PIN_CFG(145, ALT_C)
+
+#define GPIO146_GPIO		PIN_CFG(146, GPIO)
+#define GPIO146_PWM_0		PIN_CFG(146, ALT_A)
+#define GPIO146_ETM_D1		PIN_CFG(146, ALT_B)
+
+#define GPIO147_GPIO		PIN_CFG(147, GPIO)
+#define GPIO147_PWM_1		PIN_CFG(147, ALT_A)
+#define GPIO147_ETM_D0		PIN_CFG(147, ALT_B)
+
+#define GPIO148_GPIO		PIN_CFG(148, GPIO)
+#define GPIO148_PWM_2		PIN_CFG(148, ALT_A)
+#define GPIO148_ETM_CLK		PIN_CFG(148, ALT_B)
+
+#define GPIO160_GPIO		PIN_CFG(160, GPIO)
+#define GPIO160_CLKOUT_REQn	PIN_CFG(160, ALT_A)
+
+#define GPIO161_GPIO		PIN_CFG(161, GPIO)
+#define GPIO161_CLKOUT_0	PIN_CFG(161, ALT_A)
+
+#define GPIO162_GPIO		PIN_CFG(162, GPIO)
+#define GPIO162_CLKOUT_1	PIN_CFG(162, ALT_A)
+
+#define GPIO163_GPIO		PIN_CFG(163, GPIO)
+
+#define GPIO164_GPIO		PIN_CFG(164, GPIO)
+#define GPIO164_GPS_START	PIN_CFG(164, ALT_A)
+
+#define GPIO165_GPIO		PIN_CFG(165, GPIO)
+#define GPIO165_SPI1_CS2n	PIN_CFG(165, ALT_A)
+#define GPIO165_U3_RXD		PIN_CFG(165, ALT_B)
+#define GPIO165_BUSMON_D20	PIN_CFG(165, ALT_C)
+
+#define GPIO166_GPIO		PIN_CFG(166, GPIO)
+#define GPIO166_SPI1_CS1n	PIN_CFG(166, ALT_A)
+#define GPIO166_U3_TXD		PIN_CFG(166, ALT_B)
+#define GPIO166_BUSMON_D21	PIN_CFG(166, ALT_C)
+
+#define GPIO167_GPIO		PIN_CFG(167, GPIO)
+#define GPIO167_SPI1_CS0n	PIN_CFG(167, ALT_A)
+#define GPIO167_U3_RTSn		PIN_CFG(167, ALT_B)
+#define GPIO167_BUSMON_D22	PIN_CFG(167, ALT_C)
+
+#define GPIO168_GPIO		PIN_CFG(168, GPIO)
+#define GPIO168_SPI1_RXD	PIN_CFG(168, ALT_A)
+#define GPIO168_U3_CTSn		PIN_CFG(168, ALT_B)
+#define GPIO168_BUSMON_D23	PIN_CFG(168, ALT_C)
+
+#define GPIO169_GPIO		PIN_CFG(169, GPIO)
+#define GPIO169_SPI1_TXD	PIN_CFG(169, ALT_A)
+#define GPIO169_DDR_RC		PIN_CFG(169, ALT_B)
+#define GPIO169_BUSMON_D24	PIN_CFG(169, ALT_C)
+
+#define GPIO170_GPIO		PIN_CFG(170, GPIO)
+#define GPIO170_SPI1_CLK	PIN_CFG(170, ALT_A)
+
+#define GPIO171_GPIO		PIN_CFG(171, GPIO)
+#define GPIO171_MC3_DAT0	PIN_CFG(171, ALT_A)
+#define GPIO171_SPI3_RXD	PIN_CFG(171, ALT_B)
+#define GPIO171_BUSMON_D25	PIN_CFG(171, ALT_C)
+
+#define GPIO172_GPIO		PIN_CFG(172, GPIO)
+#define GPIO172_MC3_DAT1	PIN_CFG(172, ALT_A)
+#define GPIO172_SPI3_CS1n	PIN_CFG(172, ALT_B)
+#define GPIO172_BUSMON_D26	PIN_CFG(172, ALT_C)
+
+#define GPIO173_GPIO		PIN_CFG(173, GPIO)
+#define GPIO173_MC3_DAT2	PIN_CFG(173, ALT_A)
+#define GPIO173_SPI3_CS2n	PIN_CFG(173, ALT_B)
+#define GPIO173_BUSMON_D27	PIN_CFG(173, ALT_C)
+
+#define GPIO174_GPIO		PIN_CFG(174, GPIO)
+#define GPIO174_MC3_DAT3	PIN_CFG(174, ALT_A)
+#define GPIO174_SPI3_CS0n	PIN_CFG(174, ALT_B)
+#define GPIO174_BUSMON_D28	PIN_CFG(174, ALT_C)
+
+#define GPIO175_GPIO		PIN_CFG(175, GPIO)
+#define GPIO175_MC3_CMD		PIN_CFG(175, ALT_A)
+#define GPIO175_SPI3_TXD	PIN_CFG(175, ALT_B)
+#define GPIO175_BUSMON_D29	PIN_CFG(175, ALT_C)
+
+#define GPIO176_GPIO		PIN_CFG(176, GPIO)
+#define GPIO176_MC3_CLK		PIN_CFG(176, ALT_A)
+#define GPIO176_SPI3_CLK	PIN_CFG(176, ALT_B)
+
+#define GPIO177_GPIO		PIN_CFG(177, GPIO)
+#define GPIO177_U2_RXD		PIN_CFG(177, ALT_A)
+#define GPIO177_I2C3_SCL	PIN_CFG(177, ALT_B)
+#define GPIO177_BUSMON_D30	PIN_CFG(177, ALT_C)
+
+#define GPIO178_GPIO		PIN_CFG(178, GPIO)
+#define GPIO178_U2_TXD		PIN_CFG(178, ALT_A)
+#define GPIO178_I2C3_SDA	PIN_CFG(178, ALT_B)
+#define GPIO178_BUSMON_D31	PIN_CFG(178, ALT_C)
+
+#define GPIO179_GPIO		PIN_CFG(179, GPIO)
+#define GPIO179_U2_CTSn		PIN_CFG(179, ALT_A)
+#define GPIO179_U3_RXD		PIN_CFG(179, ALT_B)
+#define GPIO179_BUSMON_D32	PIN_CFG(179, ALT_C)
+
+#define GPIO180_GPIO		PIN_CFG(180, GPIO)
+#define GPIO180_U2_RTSn		PIN_CFG(180, ALT_A)
+#define GPIO180_U3_TXD		PIN_CFG(180, ALT_B)
+#define GPIO180_BUSMON_D33	PIN_CFG(180, ALT_C)
+
+#define GPIO185_GPIO		PIN_CFG(185, GPIO)
+#define GPIO185_SPI3_CS2n	PIN_CFG(185, ALT_A)
+#define GPIO185_MC4_DAT0	PIN_CFG(185, ALT_B)
+
+#define GPIO186_GPIO		PIN_CFG(186, GPIO)
+#define GPIO186_SPI3_CS1n	PIN_CFG(186, ALT_A)
+#define GPIO186_MC4_DAT1	PIN_CFG(186, ALT_B)
+
+#define GPIO187_GPIO		PIN_CFG(187, GPIO)
+#define GPIO187_SPI3_CS0n	PIN_CFG(187, ALT_A)
+#define GPIO187_MC4_DAT2	PIN_CFG(187, ALT_B)
+
+#define GPIO188_GPIO		PIN_CFG(188, GPIO)
+#define GPIO188_SPI3_RXD	PIN_CFG(188, ALT_A)
+#define GPIO188_MC4_DAT3	PIN_CFG(188, ALT_B)
+
+#define GPIO189_GPIO		PIN_CFG(189, GPIO)
+#define GPIO189_SPI3_TXD	PIN_CFG(189, ALT_A)
+#define GPIO189_MC4_CMD		PIN_CFG(189, ALT_B)
+
+#define GPIO190_GPIO		PIN_CFG(190, GPIO)
+#define GPIO190_SPI3_CLK	PIN_CFG(190, ALT_A)
+#define GPIO190_MC4_CLK		PIN_CFG(190, ALT_B)
+
+#define GPIO191_GPIO		PIN_CFG(191, GPIO)
+#define GPIO191_MC1_DAT0	PIN_CFG(191, ALT_A)
+#define GPIO191_MC4_DAT4	PIN_CFG(191, ALT_B)
+#define GPIO191_STMAPE_DAT0	PIN_CFG(191, ALT_C)
+
+#define GPIO192_GPIO		PIN_CFG(192, GPIO)
+#define GPIO192_MC1_DAT1	PIN_CFG(192, ALT_A)
+#define GPIO192_MC4_DAT5	PIN_CFG(192, ALT_B)
+#define GPIO192_STMAPE_DAT1	PIN_CFG(192, ALT_C)
+
+#define GPIO193_GPIO		PIN_CFG(193, GPIO)
+#define GPIO193_MC1_DAT2	PIN_CFG(193, ALT_A)
+#define GPIO193_MC4_DAT6	PIN_CFG(193, ALT_B)
+#define GPIO193_STMAPE_DAT2	PIN_CFG(193, ALT_C)
+
+#define GPIO194_GPIO		PIN_CFG(194, GPIO)
+#define GPIO194_MC1_DAT3	PIN_CFG(194, ALT_A)
+#define GPIO194_MC4_DAT7	PIN_CFG(194, ALT_B)
+#define GPIO194_STMAPE_DAT3	PIN_CFG(194, ALT_C)
+
+#define GPIO195_GPIO		PIN_CFG(195, GPIO)
+#define GPIO195_MC1_CLK		PIN_CFG(195, ALT_A)
+#define GPIO195_STMAPE_CLK	PIN_CFG(195, ALT_B)
+#define GPIO195_BUSMON_CLK	PIN_CFG(195, ALT_C)
+
+#define GPIO196_GPIO		PIN_CFG(196, GPIO)
+#define GPIO196_MC1_CMD		PIN_CFG(196, ALT_A)
+#define GPIO196_U0_RXD		PIN_CFG(196, ALT_B)
+#define GPIO196_BUSMON_D38	PIN_CFG(196, ALT_C)
+
+#define GPIO197_GPIO		PIN_CFG(197, GPIO)
+#define GPIO197_MC1_CMDDIR	PIN_CFG(197, ALT_A)
+#define GPIO197_BUSMON_D39	PIN_CFG(197, ALT_B)
+
+#define GPIO198_GPIO		PIN_CFG(198, GPIO)
+#define GPIO198_MC1_FBCLK	PIN_CFG(198, ALT_A)
+
+#define GPIO199_GPIO		PIN_CFG(199, GPIO)
+#define GPIO199_MC1_DAT0DIR	PIN_CFG(199, ALT_A)
+#define GPIO199_BUSMON_D40	PIN_CFG(199, ALT_B)
+
+#define GPIO200_GPIO		PIN_CFG(200, GPIO)
+#define GPIO200_U1_TXD		PIN_CFG(200, ALT_A)
+#define GPIO200_ACCU0_RTSn	PIN_CFG(200, ALT_B)
+
+#define GPIO201_GPIO		PIN_CFG(201, GPIO)
+#define GPIO201_U1_RXD		PIN_CFG(201, ALT_A)
+#define GPIO201_ACCU0_CTSn	PIN_CFG(201, ALT_B)
+
+#define GPIO202_GPIO		PIN_CFG(202, GPIO)
+#define GPIO202_U1_CTSn		PIN_CFG(202, ALT_A)
+#define GPIO202_ACCU0_RXD	PIN_CFG(202, ALT_B)
+
+#define GPIO203_GPIO		PIN_CFG(203, GPIO)
+#define GPIO203_U1_RTSn		PIN_CFG(203, ALT_A)
+#define GPIO203_ACCU0_TXD	PIN_CFG(203, ALT_B)
+
+#define GPIO204_GPIO		PIN_CFG(204, GPIO)
+#define GPIO204_SPI0_CS2n	PIN_CFG(204, ALT_A)
+#define GPIO204_ACCGPIO_000	PIN_CFG(204, ALT_B)
+#define GPIO204_LCD_VSI1	PIN_CFG(204, ALT_C)
+
+#define GPIO205_GPIO		PIN_CFG(205, GPIO)
+#define GPIO205_SPI0_CS1n	PIN_CFG(205, ALT_A)
+#define GPIO205_ACCGPIO_001	PIN_CFG(205, ALT_B)
+#define GPIO205_LCD_D3		PIN_CFG(205, ALT_C)
+
+#define GPIO206_GPIO		PIN_CFG(206, GPIO)
+#define GPIO206_SPI0_CS0n	PIN_CFG(206, ALT_A)
+#define GPIO206_ACCGPIO_002	PIN_CFG(206, ALT_B)
+#define GPIO206_LCD_D2		PIN_CFG(206, ALT_C)
+
+#define GPIO207_GPIO		PIN_CFG(207, GPIO)
+#define GPIO207_SPI0_RXD	PIN_CFG(207, ALT_A)
+#define GPIO207_ACCGPIO_003	PIN_CFG(207, ALT_B)
+#define GPIO207_LCD_D1		PIN_CFG(207, ALT_C)
+
+#define GPIO208_GPIO		PIN_CFG(208, GPIO)
+#define GPIO208_SPI0_TXD	PIN_CFG(208, ALT_A)
+#define GPIO208_ACCGPIO_004	PIN_CFG(208, ALT_B)
+#define GPIO208_LCD_D0		PIN_CFG(208, ALT_C)
+
+#define GPIO209_GPIO		PIN_CFG(209, GPIO)
+#define GPIO209_SPI0_CLK	PIN_CFG(209, ALT_A)
+#define GPIO209_ACCGPIO_005	PIN_CFG(209, ALT_B)
+#define GPIO209_LCD_CLK		PIN_CFG(209, ALT_C)
+
+#define GPIO210_GPIO		PIN_CFG(210, GPIO)
+#define GPIO210_LCD_VSO		PIN_CFG(210, ALT_A)
+#define GPIO210_PRCMU_PWRCTRL1	PIN_CFG(210, ALT_B)
+
+#define GPIO211_GPIO		PIN_CFG(211, GPIO)
+#define GPIO211_LCD_VSI0	PIN_CFG(211, ALT_A)
+#define GPIO211_PRCMU_PWRCTRL2	PIN_CFG(211, ALT_B)
+
+#define GPIO212_GPIO		PIN_CFG(212, GPIO)
+#define GPIO212_SPI2_CS2n	PIN_CFG(212, ALT_A)
+#define GPIO212_LCD_HSO		PIN_CFG(212, ALT_B)
+
+#define GPIO213_GPIO		PIN_CFG(213, GPIO)
+#define GPIO213_SPI2_CS1n	PIN_CFG(213, ALT_A)
+#define GPIO213_LCD_DE		PIN_CFG(213, ALT_B)
+#define GPIO213_BUSMON_D16	PIN_CFG(213, ALT_C)
+
+#define GPIO214_GPIO		PIN_CFG(214, GPIO)
+#define GPIO214_SPI2_CS0n	PIN_CFG(214, ALT_A)
+#define GPIO214_LCD_D7		PIN_CFG(214, ALT_B)
+#define GPIO214_BUSMON_D17	PIN_CFG(214, ALT_C)
+
+#define GPIO215_GPIO		PIN_CFG(215, GPIO)
+#define GPIO215_SPI2_RXD	PIN_CFG(215, ALT_A)
+#define GPIO215_LCD_D6		PIN_CFG(215, ALT_B)
+#define GPIO215_BUSMON_D18	PIN_CFG(215, ALT_C)
+
+#define GPIO216_GPIO		PIN_CFG(216, GPIO)
+#define GPIO216_SPI2_CLK	PIN_CFG(216, ALT_A)
+#define GPIO216_LCD_D5		PIN_CFG(216, ALT_B)
+
+#define GPIO217_GPIO		PIN_CFG(217, GPIO)
+#define GPIO217_SPI2_TXD	PIN_CFG(217, ALT_A)
+#define GPIO217_LCD_D4		PIN_CFG(217, ALT_B)
+#define GPIO217_BUSMON_D19	PIN_CFG(217, ALT_C)
+
+#define GPIO218_GPIO		PIN_CFG(218, GPIO)
+#define GPIO218_I2C2_SCL	PIN_CFG(218, ALT_A)
+#define GPIO218_LCD_VSO		PIN_CFG(218, ALT_B)
+
+#define GPIO219_GPIO		PIN_CFG(219, GPIO)
+#define GPIO219_I2C2_SDA	PIN_CFG(219, ALT_A)
+#define GPIO219_LCD_D3		PIN_CFG(219, ALT_B)
+
+#define GPIO220_GPIO		PIN_CFG(220, GPIO)
+#define GPIO220_MSP2_TCK	PIN_CFG(220, ALT_A)
+#define GPIO220_LCD_D2		PIN_CFG(220, ALT_B)
+
+#define GPIO221_GPIO		PIN_CFG(221, GPIO)
+#define GPIO221_MSP2_TFS	PIN_CFG(221, ALT_A)
+#define GPIO221_LCD_D1		PIN_CFG(221, ALT_B)
+
+#define GPIO222_GPIO		PIN_CFG(222, GPIO)
+#define GPIO222_MSP2_TXD	PIN_CFG(222, ALT_A)
+#define GPIO222_LCD_D0		PIN_CFG(222, ALT_B)
+
+#define GPIO223_GPIO		PIN_CFG(223, GPIO)
+#define GPIO223_MSP2_RXD	PIN_CFG(223, ALT_A)
+#define GPIO223_LCD_CLK		PIN_CFG(223, ALT_B)
+
+#define GPIO224_GPIO		PIN_CFG(224, GPIO)
+#define GPIO224_PRCMU_PWRCTRL0	PIN_CFG(224, ALT_A)
+#define GPIO224_LCD_VSI1	PIN_CFG(224, ALT_B)
+
+#define GPIO225_GPIO		PIN_CFG(225, GPIO)
+#define GPIO225_PRCMU_PWRCTRL1	PIN_CFG(225, ALT_A)
+#define GPIO225_IRDA_RXD	PIN_CFG(225, ALT_B)
+
+#define GPIO226_GPIO		PIN_CFG(226, GPIO)
+#define GPIO226_PRCMU_PWRCTRL2	PIN_CFG(226, ALT_A)
+#define GPIO226_IRRC_DAT	PIN_CFG(226, ALT_B)
+
+#define GPIO227_GPIO		PIN_CFG(227, GPIO)
+#define GPIO227_IRRC_DAT	PIN_CFG(227, ALT_A)
+#define GPIO227_IRDA_TXD	PIN_CFG(227, ALT_B)
+
+#endif
diff --git a/arch/arm/mach-ux500/pins-db8500.h b/arch/arm/mach-ux500/pins-db8500.h
index 9055d5d3233..66f8761cc82 100644
--- a/arch/arm/mach-ux500/pins-db8500.h
+++ b/arch/arm/mach-ux500/pins-db8500.h
@@ -96,57 +96,57 @@
 #define GPIO17_SLIM0_CLK	PIN_CFG(17, ALT_C)
 
 #define GPIO18_GPIO		PIN_CFG(18, GPIO)
-#define GPIO18_MC0_CMDDIR	PIN_CFG(18, ALT_A)
+#define GPIO18_MC0_CMDDIR	PIN_CFG_PULL(18, ALT_A, UP)
 #define GPIO18_U2_RXD		PIN_CFG(18, ALT_B)
 #define GPIO18_MS_IEP		PIN_CFG(18, ALT_C)
 
 #define GPIO19_GPIO		PIN_CFG(19, GPIO)
-#define GPIO19_MC0_DAT0DIR	PIN_CFG(19, ALT_A)
+#define GPIO19_MC0_DAT0DIR	PIN_CFG_PULL(19, ALT_A, UP)
 #define GPIO19_U2_TXD		PIN_CFG(19, ALT_B)
 #define GPIO19_MS_DAT0DIR	PIN_CFG(19, ALT_C)
 
 #define GPIO20_GPIO		PIN_CFG(20, GPIO)
-#define GPIO20_MC0_DAT2DIR	PIN_CFG(20, ALT_A)
+#define GPIO20_MC0_DAT2DIR	PIN_CFG_PULL(20, ALT_A, UP)
 #define GPIO20_UARTMOD_TXD	PIN_CFG(20, ALT_B)
 #define GPIO20_IP_TRIGOUT	PIN_CFG(20, ALT_C)
 
 #define GPIO21_GPIO		PIN_CFG(21, GPIO)
-#define GPIO21_MC0_DAT31DIR	PIN_CFG(21, ALT_A)
+#define GPIO21_MC0_DAT31DIR	PIN_CFG_PULL(21, ALT_A, UP)
 #define GPIO21_MSP0_SCK		PIN_CFG(21, ALT_B)
 #define GPIO21_MS_DAT31DIR	PIN_CFG(21, ALT_C)
 
 #define GPIO22_GPIO		PIN_CFG(22, GPIO)
-#define GPIO22_MC0_FBCLK	PIN_CFG(22, ALT_A)
+#define GPIO22_MC0_FBCLK	PIN_CFG_PULL(22, ALT_A, UP)
 #define GPIO22_UARTMOD_RXD	PIN_CFG(22, ALT_B)
 #define GPIO22_MS_FBCLK		PIN_CFG(22, ALT_C)
 
 #define GPIO23_GPIO		PIN_CFG(23, GPIO)
-#define GPIO23_MC0_CLK		PIN_CFG(23, ALT_A)
+#define GPIO23_MC0_CLK		PIN_CFG_PULL(23, ALT_A, UP)
 #define GPIO23_STMMOD_CLK	PIN_CFG(23, ALT_B)
 #define GPIO23_MS_CLK		PIN_CFG(23, ALT_C)
 
 #define GPIO24_GPIO		PIN_CFG(24, GPIO)
-#define GPIO24_MC0_CMD		PIN_CFG(24, ALT_A)
+#define GPIO24_MC0_CMD		PIN_CFG_PULL(24, ALT_A, UP)
 #define GPIO24_UARTMOD_RXD	PIN_CFG(24, ALT_B)
 #define GPIO24_MS_BS		PIN_CFG(24, ALT_C)
 
 #define GPIO25_GPIO		PIN_CFG(25, GPIO)
-#define GPIO25_MC0_DAT0		PIN_CFG(25, ALT_A)
+#define GPIO25_MC0_DAT0		PIN_CFG_PULL(25, ALT_A, UP)
 #define GPIO25_STMMOD_DAT0	PIN_CFG(25, ALT_B)
 #define GPIO25_MS_DAT0		PIN_CFG(25, ALT_C)
 
 #define GPIO26_GPIO		PIN_CFG(26, GPIO)
-#define GPIO26_MC0_DAT1		PIN_CFG(26, ALT_A)
+#define GPIO26_MC0_DAT1		PIN_CFG_PULL(26, ALT_A, UP)
 #define GPIO26_STMMOD_DAT1	PIN_CFG(26, ALT_B)
 #define GPIO26_MS_DAT1		PIN_CFG(26, ALT_C)
 
 #define GPIO27_GPIO		PIN_CFG(27, GPIO)
-#define GPIO27_MC0_DAT2		PIN_CFG(27, ALT_A)
+#define GPIO27_MC0_DAT2		PIN_CFG_PULL(27, ALT_A, UP)
 #define GPIO27_STMMOD_DAT2	PIN_CFG(27, ALT_B)
 #define GPIO27_MS_DAT2		PIN_CFG(27, ALT_C)
 
 #define GPIO28_GPIO		PIN_CFG(28, GPIO)
-#define GPIO28_MC0_DAT3		PIN_CFG(28, ALT_A)
+#define GPIO28_MC0_DAT3		PIN_CFG_PULL(28, ALT_A, UP)
 #define GPIO28_STMMOD_DAT3	PIN_CFG(28, ALT_B)
 #define GPIO28_MS_DAT3		PIN_CFG(28, ALT_C)
 
@@ -357,48 +357,48 @@
 #define GPIO97_MC5_DAT7		PIN_CFG(97, ALT_C)
 
 #define GPIO128_GPIO		PIN_CFG(128, GPIO)
-#define GPIO128_MC2_CLK		PIN_CFG(128, ALT_A)
+#define GPIO128_MC2_CLK		PIN_CFG_PULL(128, ALT_A, UP)
 #define GPIO128_SM_CKO		PIN_CFG(128, ALT_B)
 
 #define GPIO129_GPIO		PIN_CFG(129, GPIO)
-#define GPIO129_MC2_CMD		PIN_CFG(129, ALT_A)
+#define GPIO129_MC2_CMD		PIN_CFG_PULL(129, ALT_A, UP)
 #define GPIO129_SM_WAIT0n	PIN_CFG(129, ALT_B)
 
 #define GPIO130_GPIO		PIN_CFG(130, GPIO)
-#define GPIO130_MC2_FBCLK	PIN_CFG(130, ALT_A)
+#define GPIO130_MC2_FBCLK	PIN_CFG_PULL(130, ALT_A, UP)
 #define GPIO130_SM_FBCLK	PIN_CFG(130, ALT_B)
 #define GPIO130_MC2_RSTN	PIN_CFG(130, ALT_C)
 
 #define GPIO131_GPIO		PIN_CFG(131, GPIO)
-#define GPIO131_MC2_DAT0	PIN_CFG(131, ALT_A)
+#define GPIO131_MC2_DAT0	PIN_CFG_PULL(131, ALT_A, UP)
 #define GPIO131_SM_ADQ8		PIN_CFG(131, ALT_B)
 
 #define GPIO132_GPIO		PIN_CFG(132, GPIO)
-#define GPIO132_MC2_DAT1	PIN_CFG(132, ALT_A)
+#define GPIO132_MC2_DAT1	PIN_CFG_PULL(132, ALT_A, UP)
 #define GPIO132_SM_ADQ9		PIN_CFG(132, ALT_B)
 
 #define GPIO133_GPIO		PIN_CFG(133, GPIO)
-#define GPIO133_MC2_DAT2	PIN_CFG(133, ALT_A)
+#define GPIO133_MC2_DAT2	PIN_CFG_PULL(133, ALT_A, UP)
 #define GPIO133_SM_ADQ10	PIN_CFG(133, ALT_B)
 
 #define GPIO134_GPIO		PIN_CFG(134, GPIO)
-#define GPIO134_MC2_DAT3	PIN_CFG(134, ALT_A)
+#define GPIO134_MC2_DAT3	PIN_CFG_PULL(134, ALT_A, UP)
 #define GPIO134_SM_ADQ11	PIN_CFG(134, ALT_B)
 
 #define GPIO135_GPIO		PIN_CFG(135, GPIO)
-#define GPIO135_MC2_DAT4	PIN_CFG(135, ALT_A)
+#define GPIO135_MC2_DAT4	PIN_CFG_PULL(135, ALT_A, UP)
 #define GPIO135_SM_ADQ12	PIN_CFG(135, ALT_B)
 
 #define GPIO136_GPIO		PIN_CFG(136, GPIO)
-#define GPIO136_MC2_DAT5	PIN_CFG(136, ALT_A)
+#define GPIO136_MC2_DAT5	PIN_CFG_PULL(136, ALT_A, UP)
 #define GPIO136_SM_ADQ13	PIN_CFG(136, ALT_B)
 
 #define GPIO137_GPIO		PIN_CFG(137, GPIO)
-#define GPIO137_MC2_DAT6	PIN_CFG(137, ALT_A)
+#define GPIO137_MC2_DAT6	PIN_CFG_PULL(137, ALT_A, UP)
 #define GPIO137_SM_ADQ14	PIN_CFG(137, ALT_B)
 
 #define GPIO138_GPIO		PIN_CFG(138, GPIO)
-#define GPIO138_MC2_DAT7	PIN_CFG(138, ALT_A)
+#define GPIO138_MC2_DAT7	PIN_CFG_PULL(138, ALT_A, UP)
 #define GPIO138_SM_ADQ15	PIN_CFG(138, ALT_B)
 
 #define GPIO139_GPIO		PIN_CFG(139, GPIO)
@@ -569,39 +569,39 @@
 #define GPIO196_MSP2_RXD	PIN_CFG(196, ALT_A)
 
 #define GPIO197_GPIO		PIN_CFG(197, GPIO)
-#define GPIO197_MC4_DAT3	PIN_CFG(197, ALT_A)
+#define GPIO197_MC4_DAT3	PIN_CFG_PULL(197, ALT_A, UP)
 
 #define GPIO198_GPIO		PIN_CFG(198, GPIO)
-#define GPIO198_MC4_DAT2	PIN_CFG(198, ALT_A)
+#define GPIO198_MC4_DAT2	PIN_CFG_PULL(198, ALT_A, UP)
 
 #define GPIO199_GPIO		PIN_CFG(199, GPIO)
-#define GPIO199_MC4_DAT1	PIN_CFG(199, ALT_A)
+#define GPIO199_MC4_DAT1	PIN_CFG_PULL(199, ALT_A, UP)
 
 #define GPIO200_GPIO		PIN_CFG(200, GPIO)
-#define GPIO200_MC4_DAT0	PIN_CFG(200, ALT_A)
+#define GPIO200_MC4_DAT0	PIN_CFG_PULL(200, ALT_A, UP)
 
 #define GPIO201_GPIO		PIN_CFG(201, GPIO)
-#define GPIO201_MC4_CMD		PIN_CFG(201, ALT_A)
+#define GPIO201_MC4_CMD		PIN_CFG_PULL(201, ALT_A, UP)
 
 #define GPIO202_GPIO		PIN_CFG(202, GPIO)
-#define GPIO202_MC4_FBCLK	PIN_CFG(202, ALT_A)
+#define GPIO202_MC4_FBCLK	PIN_CFG_PULL(202, ALT_A, UP)
 #define GPIO202_PWL		PIN_CFG(202, ALT_B)
 #define GPIO202_MC4_RSTN	PIN_CFG(202, ALT_C)
 
 #define GPIO203_GPIO		PIN_CFG(203, GPIO)
-#define GPIO203_MC4_CLK		PIN_CFG(203, ALT_A)
+#define GPIO203_MC4_CLK		PIN_CFG_PULL(203, ALT_A, UP)
 
 #define GPIO204_GPIO		PIN_CFG(204, GPIO)
-#define GPIO204_MC4_DAT7	PIN_CFG(204, ALT_A)
+#define GPIO204_MC4_DAT7	PIN_CFG_PULL(204, ALT_A, UP)
 
 #define GPIO205_GPIO		PIN_CFG(205, GPIO)
-#define GPIO205_MC4_DAT6	PIN_CFG(205, ALT_A)
+#define GPIO205_MC4_DAT6	PIN_CFG_PULL(205, ALT_A, UP)
 
 #define GPIO206_GPIO		PIN_CFG(206, GPIO)
-#define GPIO206_MC4_DAT5	PIN_CFG(206, ALT_A)
+#define GPIO206_MC4_DAT5	PIN_CFG_PULL(206, ALT_A, UP)
 
 #define GPIO207_GPIO		PIN_CFG(207, GPIO)
-#define GPIO207_MC4_DAT4	PIN_CFG(207, ALT_A)
+#define GPIO207_MC4_DAT4	PIN_CFG_PULL(207, ALT_A, UP)
 
 #define GPIO208_GPIO		PIN_CFG(208, GPIO)
 #define GPIO208_MC1_CLK		PIN_CFG(208, ALT_A)
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index 438ef16aec9..9e4c678de78 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -78,6 +78,8 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 	__cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
 	outer_clean_range(__pa(&pen_release), __pa(&pen_release) + 1);
 
+	smp_cross_call(cpumask_of(cpu));
+
 	timeout = jiffies + (1 * HZ);
 	while (time_before(jiffies, timeout)) {
 		if (pen_release == -1)
diff --git a/arch/arm/mach-ux500/prcmu.c b/arch/arm/mach-ux500/prcmu.c
new file mode 100644
index 00000000000..293274d1342
--- /dev/null
+++ b/arch/arm/mach-ux500/prcmu.c
@@ -0,0 +1,231 @@
+/*
+ * Copyright (C) ST Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
+ *
+ * U8500 PRCMU driver.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/mutex.h>
+#include <linux/completion.h>
+#include <linux/jiffies.h>
+#include <linux/bitops.h>
+#include <linux/interrupt.h>
+
+#include <mach/hardware.h>
+#include <mach/prcmu-regs.h>
+
+#define PRCMU_TCDM_BASE __io_address(U8500_PRCMU_TCDM_BASE)
+
+#define REQ_MB5 (PRCMU_TCDM_BASE + 0xE44)
+#define ACK_MB5 (PRCMU_TCDM_BASE + 0xDF4)
+
+#define REQ_MB5_I2C_SLAVE_OP (REQ_MB5)
+#define REQ_MB5_I2C_HW_BITS (REQ_MB5 + 1)
+#define REQ_MB5_I2C_REG (REQ_MB5 + 2)
+#define REQ_MB5_I2C_VAL (REQ_MB5 + 3)
+
+#define ACK_MB5_I2C_STATUS (ACK_MB5 + 1)
+#define ACK_MB5_I2C_VAL (ACK_MB5 + 3)
+
+#define I2C_WRITE(slave) ((slave) << 1)
+#define I2C_READ(slave) (((slave) << 1) | BIT(0))
+#define I2C_STOP_EN BIT(3)
+
+enum ack_mb5_status {
+	I2C_WR_OK = 0x01,
+	I2C_RD_OK = 0x02,
+};
+
+#define MBOX_BIT BIT
+#define NUM_MBOX 8
+
+static struct {
+	struct mutex lock;
+	struct completion work;
+	bool failed;
+	struct {
+		u8 status;
+		u8 value;
+	} ack;
+} mb5_transfer;
+
+/**
+ * prcmu_abb_read() - Read register value(s) from the ABB.
+ * @slave:	The I2C slave address.
+ * @reg:	The (start) register address.
+ * @value:	The read out value(s).
+ * @size:	The number of registers to read.
+ *
+ * Reads register value(s) from the ABB.
+ * @size has to be 1 for the current firmware version.
+ */
+int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
+{
+	int r;
+
+	if (size != 1)
+		return -EINVAL;
+
+	r = mutex_lock_interruptible(&mb5_transfer.lock);
+	if (r)
+		return r;
+
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
+		cpu_relax();
+
+	writeb(I2C_READ(slave), REQ_MB5_I2C_SLAVE_OP);
+	writeb(I2C_STOP_EN, REQ_MB5_I2C_HW_BITS);
+	writeb(reg, REQ_MB5_I2C_REG);
+
+	writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET);
+	if (!wait_for_completion_timeout(&mb5_transfer.work,
+			msecs_to_jiffies(500))) {
+		pr_err("prcmu: prcmu_abb_read timed out.\n");
+		r = -EIO;
+		goto unlock_and_return;
+	}
+	r = ((mb5_transfer.ack.status == I2C_RD_OK) ? 0 : -EIO);
+	if (!r)
+		*value = mb5_transfer.ack.value;
+
+unlock_and_return:
+	mutex_unlock(&mb5_transfer.lock);
+	return r;
+}
+EXPORT_SYMBOL(prcmu_abb_read);
+
+/**
+ * prcmu_abb_write() - Write register value(s) to the ABB.
+ * @slave:	The I2C slave address.
+ * @reg:	The (start) register address.
+ * @value:	The value(s) to write.
+ * @size:	The number of registers to write.
+ *
+ * Reads register value(s) from the ABB.
+ * @size has to be 1 for the current firmware version.
+ */
+int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
+{
+	int r;
+
+	if (size != 1)
+		return -EINVAL;
+
+	r = mutex_lock_interruptible(&mb5_transfer.lock);
+	if (r)
+		return r;
+
+
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
+		cpu_relax();
+
+	writeb(I2C_WRITE(slave), REQ_MB5_I2C_SLAVE_OP);
+	writeb(I2C_STOP_EN, REQ_MB5_I2C_HW_BITS);
+	writeb(reg, REQ_MB5_I2C_REG);
+	writeb(*value, REQ_MB5_I2C_VAL);
+
+	writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET);
+	if (!wait_for_completion_timeout(&mb5_transfer.work,
+			msecs_to_jiffies(500))) {
+		pr_err("prcmu: prcmu_abb_write timed out.\n");
+		r = -EIO;
+		goto unlock_and_return;
+	}
+	r = ((mb5_transfer.ack.status == I2C_WR_OK) ? 0 : -EIO);
+
+unlock_and_return:
+	mutex_unlock(&mb5_transfer.lock);
+	return r;
+}
+EXPORT_SYMBOL(prcmu_abb_write);
+
+static void read_mailbox_0(void)
+{
+	writel(MBOX_BIT(0), PRCM_ARM_IT1_CLEAR);
+}
+
+static void read_mailbox_1(void)
+{
+	writel(MBOX_BIT(1), PRCM_ARM_IT1_CLEAR);
+}
+
+static void read_mailbox_2(void)
+{
+	writel(MBOX_BIT(2), PRCM_ARM_IT1_CLEAR);
+}
+
+static void read_mailbox_3(void)
+{
+	writel(MBOX_BIT(3), PRCM_ARM_IT1_CLEAR);
+}
+
+static void read_mailbox_4(void)
+{
+	writel(MBOX_BIT(4), PRCM_ARM_IT1_CLEAR);
+}
+
+static void read_mailbox_5(void)
+{
+	mb5_transfer.ack.status = readb(ACK_MB5_I2C_STATUS);
+	mb5_transfer.ack.value = readb(ACK_MB5_I2C_VAL);
+	complete(&mb5_transfer.work);
+	writel(MBOX_BIT(5), PRCM_ARM_IT1_CLEAR);
+}
+
+static void read_mailbox_6(void)
+{
+	writel(MBOX_BIT(6), PRCM_ARM_IT1_CLEAR);
+}
+
+static void read_mailbox_7(void)
+{
+	writel(MBOX_BIT(7), PRCM_ARM_IT1_CLEAR);
+}
+
+static void (* const read_mailbox[NUM_MBOX])(void) = {
+	read_mailbox_0,
+	read_mailbox_1,
+	read_mailbox_2,
+	read_mailbox_3,
+	read_mailbox_4,
+	read_mailbox_5,
+	read_mailbox_6,
+	read_mailbox_7
+};
+
+static irqreturn_t prcmu_irq_handler(int irq, void *data)
+{
+	u32 bits;
+	u8 n;
+
+	bits = (readl(PRCM_ARM_IT1_VAL) & (MBOX_BIT(NUM_MBOX) - 1));
+	if (unlikely(!bits))
+		return IRQ_NONE;
+
+	for (n = 0; bits; n++) {
+		if (bits & MBOX_BIT(n)) {
+			bits -= MBOX_BIT(n);
+			read_mailbox[n]();
+		}
+	}
+	return IRQ_HANDLED;
+}
+
+static int __init prcmu_init(void)
+{
+	mutex_init(&mb5_transfer.lock);
+	init_completion(&mb5_transfer.work);
+
+	/* Clean up the mailbox interrupts after pre-kernel code. */
+	writel((MBOX_BIT(NUM_MBOX) - 1), PRCM_ARM_IT1_CLEAR);
+
+	return request_irq(IRQ_PRCMU, prcmu_irq_handler, 0, "prcmu", NULL);
+}
+
+arch_initcall(prcmu_init);
diff --git a/arch/arm/mach-ux500/ste-dma40-db5500.h b/arch/arm/mach-ux500/ste-dma40-db5500.h
new file mode 100644
index 00000000000..cb2110c3285
--- /dev/null
+++ b/arch/arm/mach-ux500/ste-dma40-db5500.h
@@ -0,0 +1,135 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * DB5500-SoC-specific configuration for DMA40
+ */
+
+#ifndef STE_DMA40_DB5500_H
+#define STE_DMA40_DB5500_H
+
+#define DB5500_DMA_NR_DEV 64
+
+enum dma_src_dev_type {
+	DB5500_DMA_DEV0_SPI0_RX = 0,
+	DB5500_DMA_DEV1_SPI1_RX = 1,
+	DB5500_DMA_DEV2_SPI2_RX = 2,
+	DB5500_DMA_DEV3_SPI3_RX = 3,
+	DB5500_DMA_DEV4_USB_OTG_IEP_1_9 = 4,
+	DB5500_DMA_DEV5_USB_OTG_IEP_2_10 = 5,
+	DB5500_DMA_DEV6_USB_OTG_IEP_3_11 = 6,
+	DB5500_DMA_DEV7_IRDA_RFS = 7,
+	DB5500_DMA_DEV8_IRDA_FIFO_RX = 8,
+	DB5500_DMA_DEV9_MSP0_RX = 9,
+	DB5500_DMA_DEV10_MSP1_RX = 10,
+	DB5500_DMA_DEV11_MSP2_RX = 11,
+	DB5500_DMA_DEV12_UART0_RX = 12,
+	DB5500_DMA_DEV13_UART1_RX = 13,
+	DB5500_DMA_DEV14_UART2_RX = 14,
+	DB5500_DMA_DEV15_UART3_RX = 15,
+	DB5500_DMA_DEV16_USB_OTG_IEP_8 = 16,
+	DB5500_DMA_DEV17_USB_OTG_IEP_1_9 = 17,
+	DB5500_DMA_DEV18_USB_OTG_IEP_2_10 = 18,
+	DB5500_DMA_DEV19_USB_OTG_IEP_3_11 = 19,
+	DB5500_DMA_DEV20_USB_OTG_IEP_4_12 = 20,
+	DB5500_DMA_DEV21_USB_OTG_IEP_5_13 = 21,
+	DB5500_DMA_DEV22_USB_OTG_IEP_6_14 = 22,
+	DB5500_DMA_DEV23_USB_OTG_IEP_7_15 = 23,
+	DB5500_DMA_DEV24_SDMMC0_RX = 24,
+	DB5500_DMA_DEV25_SDMMC1_RX = 25,
+	DB5500_DMA_DEV26_SDMMC2_RX = 26,
+	DB5500_DMA_DEV27_SDMMC3_RX = 27,
+	DB5500_DMA_DEV28_SDMMC4_RX = 28,
+	/* 29 - 32 not used */
+	DB5500_DMA_DEV33_SDMMC0_RX = 33,
+	DB5500_DMA_DEV34_SDMMC1_RX = 34,
+	DB5500_DMA_DEV35_SDMMC2_RX = 35,
+	DB5500_DMA_DEV36_SDMMC3_RX = 36,
+	DB5500_DMA_DEV37_SDMMC4_RX = 37,
+	DB5500_DMA_DEV38_USB_OTG_IEP_8 = 38,
+	DB5500_DMA_DEV39_USB_OTG_IEP_1_9 = 39,
+	DB5500_DMA_DEV40_USB_OTG_IEP_2_10 = 40,
+	DB5500_DMA_DEV41_USB_OTG_IEP_3_11 = 41,
+	DB5500_DMA_DEV42_USB_OTG_IEP_4_12 = 42,
+	DB5500_DMA_DEV43_USB_OTG_IEP_5_13 = 43,
+	DB5500_DMA_DEV44_USB_OTG_IEP_6_14 = 44,
+	DB5500_DMA_DEV45_USB_OTG_IEP_7_15 = 45,
+	/* 46 not used */
+	DB5500_DMA_DEV47_MCDE_RX = 47,
+	DB5500_DMA_DEV48_CRYPTO1_RX = 48,
+	/* 49, 50 not used */
+	DB5500_DMA_DEV49_I2C1_RX = 51,
+	DB5500_DMA_DEV50_I2C3_RX = 52,
+	DB5500_DMA_DEV51_I2C2_RX = 53,
+	/* 54 - 60 not used */
+	DB5500_DMA_DEV61_CRYPTO0_RX = 61,
+	/* 62, 63 not used */
+};
+
+enum dma_dest_dev_type {
+	DB5500_DMA_DEV0_SPI0_TX = 0,
+	DB5500_DMA_DEV1_SPI1_TX = 1,
+	DB5500_DMA_DEV2_SPI2_TX = 2,
+	DB5500_DMA_DEV3_SPI3_TX = 3,
+	DB5500_DMA_DEV4_USB_OTG_OEP_1_9 = 4,
+	DB5500_DMA_DEV5_USB_OTG_OEP_2_10 = 5,
+	DB5500_DMA_DEV6_USB_OTG_OEP_3_11 = 6,
+	DB5500_DMA_DEV7_IRRC_TX = 7,
+	DB5500_DMA_DEV8_IRDA_FIFO_TX = 8,
+	DB5500_DMA_DEV9_MSP0_TX = 9,
+	DB5500_DMA_DEV10_MSP1_TX = 10,
+	DB5500_DMA_DEV11_MSP2_TX = 11,
+	DB5500_DMA_DEV12_UART0_TX = 12,
+	DB5500_DMA_DEV13_UART1_TX = 13,
+	DB5500_DMA_DEV14_UART2_TX = 14,
+	DB5500_DMA_DEV15_UART3_TX = 15,
+	DB5500_DMA_DEV16_USB_OTG_OEP_8 = 16,
+	DB5500_DMA_DEV17_USB_OTG_OEP_1_9 = 17,
+	DB5500_DMA_DEV18_USB_OTG_OEP_2_10 = 18,
+	DB5500_DMA_DEV19_USB_OTG_OEP_3_11 = 19,
+	DB5500_DMA_DEV20_USB_OTG_OEP_4_12 = 20,
+	DB5500_DMA_DEV21_USB_OTG_OEP_5_13 = 21,
+	DB5500_DMA_DEV22_USB_OTG_OEP_6_14 = 22,
+	DB5500_DMA_DEV23_USB_OTG_OEP_7_15 = 23,
+	DB5500_DMA_DEV24_SDMMC0_TX = 24,
+	DB5500_DMA_DEV25_SDMMC1_TX = 25,
+	DB5500_DMA_DEV26_SDMMC2_TX = 26,
+	DB5500_DMA_DEV27_SDMMC3_TX = 27,
+	DB5500_DMA_DEV28_SDMMC4_TX = 28,
+	/* 29 - 31 not used */
+	DB5500_DMA_DEV32_FSMC_TX = 32,
+	DB5500_DMA_DEV33_SDMMC0_TX = 33,
+	DB5500_DMA_DEV34_SDMMC1_TX = 34,
+	DB5500_DMA_DEV35_SDMMC2_TX = 35,
+	DB5500_DMA_DEV36_SDMMC3_TX = 36,
+	DB5500_DMA_DEV37_SDMMC4_TX = 37,
+	DB5500_DMA_DEV38_USB_OTG_OEP_8 = 38,
+	DB5500_DMA_DEV39_USB_OTG_OEP_1_9 = 39,
+	DB5500_DMA_DEV40_USB_OTG_OEP_2_10 = 40,
+	DB5500_DMA_DEV41_USB_OTG_OEP_3_11 = 41,
+	DB5500_DMA_DEV42_USB_OTG_OEP_4_12 = 42,
+	DB5500_DMA_DEV43_USB_OTG_OEP_5_13 = 43,
+	DB5500_DMA_DEV44_USB_OTG_OEP_6_14 = 44,
+	DB5500_DMA_DEV45_USB_OTG_OEP_7_15 = 45,
+	/* 46 not used */
+	DB5500_DMA_DEV47_STM_TX = 47,
+	DB5500_DMA_DEV48_CRYPTO1_TX = 48,
+	DB5500_DMA_DEV49_CRYPTO1_TX_HASH1_TX = 49,
+	DB5500_DMA_DEV50_HASH1_TX = 50,
+	DB5500_DMA_DEV51_I2C1_TX = 51,
+	DB5500_DMA_DEV52_I2C3_TX = 52,
+	DB5500_DMA_DEV53_I2C2_TX = 53,
+	/* 54, 55 not used */
+	DB5500_DMA_MEMCPY_TX_1 = 56,
+	DB5500_DMA_MEMCPY_TX_2 = 57,
+	DB5500_DMA_MEMCPY_TX_3 = 58,
+	DB5500_DMA_MEMCPY_TX_4 = 59,
+	DB5500_DMA_MEMCPY_TX_5 = 60,
+	DB5500_DMA_DEV61_CRYPTO0_TX = 61,
+	DB5500_DMA_DEV62_CRYPTO0_TX_HASH0_TX = 62,
+	DB5500_DMA_DEV63_HASH0_TX = 63,
+};
+
+#endif
diff --git a/arch/arm/mach-ux500/ste-dma40-db8500.h b/arch/arm/mach-ux500/ste-dma40-db8500.h
index 9d9d3797b3b..a616419bea7 100644
--- a/arch/arm/mach-ux500/ste-dma40-db8500.h
+++ b/arch/arm/mach-ux500/ste-dma40-db8500.h
@@ -10,145 +10,135 @@
 #ifndef STE_DMA40_DB8500_H
 #define STE_DMA40_DB8500_H
 
-#define STEDMA40_NR_DEV 64
+#define DB8500_DMA_NR_DEV 64
 
 enum dma_src_dev_type {
-	STEDMA40_DEV_SPI0_RX = 0,
-	STEDMA40_DEV_SD_MMC0_RX = 1,
-	STEDMA40_DEV_SD_MMC1_RX = 2,
-	STEDMA40_DEV_SD_MMC2_RX = 3,
-	STEDMA40_DEV_I2C1_RX = 4,
-	STEDMA40_DEV_I2C3_RX = 5,
-	STEDMA40_DEV_I2C2_RX = 6,
-	STEDMA40_DEV_I2C4_RX = 7, /* Only on V1 */
-	STEDMA40_DEV_SSP0_RX = 8,
-	STEDMA40_DEV_SSP1_RX = 9,
-	STEDMA40_DEV_MCDE_RX = 10,
-	STEDMA40_DEV_UART2_RX = 11,
-	STEDMA40_DEV_UART1_RX = 12,
-	STEDMA40_DEV_UART0_RX = 13,
-	STEDMA40_DEV_MSP2_RX = 14,
-	STEDMA40_DEV_I2C0_RX = 15,
-	STEDMA40_DEV_USB_OTG_IEP_8 = 16,
-	STEDMA40_DEV_USB_OTG_IEP_1_9 = 17,
-	STEDMA40_DEV_USB_OTG_IEP_2_10 = 18,
-	STEDMA40_DEV_USB_OTG_IEP_3_11 = 19,
-	STEDMA40_DEV_SLIM0_CH0_RX_HSI_RX_CH0 = 20,
-	STEDMA40_DEV_SLIM0_CH1_RX_HSI_RX_CH1 = 21,
-	STEDMA40_DEV_SLIM0_CH2_RX_HSI_RX_CH2 = 22,
-	STEDMA40_DEV_SLIM0_CH3_RX_HSI_RX_CH3 = 23,
-	STEDMA40_DEV_SRC_SXA0_RX_TX = 24,
-	STEDMA40_DEV_SRC_SXA1_RX_TX = 25,
-	STEDMA40_DEV_SRC_SXA2_RX_TX = 26,
-	STEDMA40_DEV_SRC_SXA3_RX_TX = 27,
-	STEDMA40_DEV_SD_MM2_RX = 28,
-	STEDMA40_DEV_SD_MM0_RX = 29,
-	STEDMA40_DEV_MSP1_RX = 30,
-	/*
-	 * This channel is either SlimBus or MSP,
-	 * never both at the same time.
-	 */
-	STEDMA40_SLIM0_CH0_RX = 31,
-	STEDMA40_DEV_MSP0_RX = 31,
-	STEDMA40_DEV_SD_MM1_RX = 32,
-	STEDMA40_DEV_SPI2_RX = 33,
-	STEDMA40_DEV_I2C3_RX2 = 34,
-	STEDMA40_DEV_SPI1_RX = 35,
-	STEDMA40_DEV_USB_OTG_IEP_4_12 = 36,
-	STEDMA40_DEV_USB_OTG_IEP_5_13 = 37,
-	STEDMA40_DEV_USB_OTG_IEP_6_14 = 38,
-	STEDMA40_DEV_USB_OTG_IEP_7_15 = 39,
-	STEDMA40_DEV_SPI3_RX = 40,
-	STEDMA40_DEV_SD_MM3_RX = 41,
-	STEDMA40_DEV_SD_MM4_RX = 42,
-	STEDMA40_DEV_SD_MM5_RX = 43,
-	STEDMA40_DEV_SRC_SXA4_RX_TX = 44,
-	STEDMA40_DEV_SRC_SXA5_RX_TX = 45,
-	STEDMA40_DEV_SRC_SXA6_RX_TX = 46,
-	STEDMA40_DEV_SRC_SXA7_RX_TX = 47,
-	STEDMA40_DEV_CAC1_RX = 48,
-	/* RX channels 49 and 50 are unused */
-	STEDMA40_DEV_MSHC_RX = 51,
-	STEDMA40_DEV_SLIM1_CH0_RX_HSI_RX_CH4 = 52,
-	STEDMA40_DEV_SLIM1_CH1_RX_HSI_RX_CH5 = 53,
-	STEDMA40_DEV_SLIM1_CH2_RX_HSI_RX_CH6 = 54,
-	STEDMA40_DEV_SLIM1_CH3_RX_HSI_RX_CH7 = 55,
-	/* RX channels 56 thru 60 are unused */
-	STEDMA40_DEV_CAC0_RX = 61,
-	/* RX channels 62 and 63 are unused */
+	DB8500_DMA_DEV0_SPI0_RX = 0,
+	DB8500_DMA_DEV1_SD_MMC0_RX = 1,
+	DB8500_DMA_DEV2_SD_MMC1_RX = 2,
+	DB8500_DMA_DEV3_SD_MMC2_RX = 3,
+	DB8500_DMA_DEV4_I2C1_RX = 4,
+	DB8500_DMA_DEV5_I2C3_RX = 5,
+	DB8500_DMA_DEV6_I2C2_RX = 6,
+	DB8500_DMA_DEV7_I2C4_RX = 7, /* Only on V1 and later */
+	DB8500_DMA_DEV8_SSP0_RX = 8,
+	DB8500_DMA_DEV9_SSP1_RX = 9,
+	DB8500_DMA_DEV10_MCDE_RX = 10,
+	DB8500_DMA_DEV11_UART2_RX = 11,
+	DB8500_DMA_DEV12_UART1_RX = 12,
+	DB8500_DMA_DEV13_UART0_RX = 13,
+	DB8500_DMA_DEV14_MSP2_RX = 14,
+	DB8500_DMA_DEV15_I2C0_RX = 15,
+	DB8500_DMA_DEV16_USB_OTG_IEP_7_15 = 16,
+	DB8500_DMA_DEV17_USB_OTG_IEP_6_14 = 17,
+	DB8500_DMA_DEV18_USB_OTG_IEP_5_13 = 18,
+	DB8500_DMA_DEV19_USB_OTG_IEP_4_12 = 19,
+	DB8500_DMA_DEV20_SLIM0_CH0_RX_HSI_RX_CH0 = 20,
+	DB8500_DMA_DEV21_SLIM0_CH1_RX_HSI_RX_CH1 = 21,
+	DB8500_DMA_DEV22_SLIM0_CH2_RX_HSI_RX_CH2 = 22,
+	DB8500_DMA_DEV23_SLIM0_CH3_RX_HSI_RX_CH3 = 23,
+	DB8500_DMA_DEV24_SRC_SXA0_RX_TX = 24,
+	DB8500_DMA_DEV25_SRC_SXA1_RX_TX = 25,
+	DB8500_DMA_DEV26_SRC_SXA2_RX_TX = 26,
+	DB8500_DMA_DEV27_SRC_SXA3_RX_TX = 27,
+	DB8500_DMA_DEV28_SD_MM2_RX = 28,
+	DB8500_DMA_DEV29_SD_MM0_RX = 29,
+	DB8500_DMA_DEV30_MSP1_RX = 30,
+	/* On DB8500v2, MSP3 RX replaces MSP1 RX */
+	DB8500_DMA_DEV30_MSP3_RX = 30,
+	DB8500_DMA_DEV31_MSP0_RX_SLIM0_CH0_RX = 31,
+	DB8500_DMA_DEV32_SD_MM1_RX = 32,
+	DB8500_DMA_DEV33_SPI2_RX = 33,
+	DB8500_DMA_DEV34_I2C3_RX2 = 34,
+	DB8500_DMA_DEV35_SPI1_RX = 35,
+	DB8500_DMA_DEV36_USB_OTG_IEP_3_11 = 36,
+	DB8500_DMA_DEV37_USB_OTG_IEP_2_10 = 37,
+	DB8500_DMA_DEV38_USB_OTG_IEP_1_9 = 38,
+	DB8500_DMA_DEV39_USB_OTG_IEP_8 = 39,
+	DB8500_DMA_DEV40_SPI3_RX = 40,
+	DB8500_DMA_DEV41_SD_MM3_RX = 41,
+	DB8500_DMA_DEV42_SD_MM4_RX = 42,
+	DB8500_DMA_DEV43_SD_MM5_RX = 43,
+	DB8500_DMA_DEV44_SRC_SXA4_RX_TX = 44,
+	DB8500_DMA_DEV45_SRC_SXA5_RX_TX = 45,
+	DB8500_DMA_DEV46_SLIM0_CH8_RX_SRC_SXA6_RX_TX = 46,
+	DB8500_DMA_DEV47_SLIM0_CH9_RX_SRC_SXA7_RX_TX = 47,
+	DB8500_DMA_DEV48_CAC1_RX = 48,
+	/* 49, 50 and 51 are not used */
+	DB8500_DMA_DEV52_SLIM0_CH4_RX_HSI_RX_CH4 = 52,
+	DB8500_DMA_DEV53_SLIM0_CH5_RX_HSI_RX_CH5 = 53,
+	DB8500_DMA_DEV54_SLIM0_CH6_RX_HSI_RX_CH6 = 54,
+	DB8500_DMA_DEV55_SLIM0_CH7_RX_HSI_RX_CH7 = 55,
+	/* 56, 57, 58, 59 and 60 are not used */
+	DB8500_DMA_DEV61_CAC0_RX = 61,
+	/* 62 and 63 are not used */
 };
 
 enum dma_dest_dev_type {
-	STEDMA40_DEV_SPI0_TX = 0,
-	STEDMA40_DEV_SD_MMC0_TX = 1,
-	STEDMA40_DEV_SD_MMC1_TX = 2,
-	STEDMA40_DEV_SD_MMC2_TX = 3,
-	STEDMA40_DEV_I2C1_TX = 4,
-	STEDMA40_DEV_I2C3_TX = 5,
-	STEDMA40_DEV_I2C2_TX = 6,
-	STEDMA50_DEV_I2C4_TX = 7, /* Only on V1 */
-	STEDMA40_DEV_SSP0_TX = 8,
-	STEDMA40_DEV_SSP1_TX = 9,
-	/* TX channel 10 is unused */
-	STEDMA40_DEV_UART2_TX = 11,
-	STEDMA40_DEV_UART1_TX = 12,
-	STEDMA40_DEV_UART0_TX= 13,
-	STEDMA40_DEV_MSP2_TX = 14,
-	STEDMA40_DEV_I2C0_TX = 15,
-	STEDMA40_DEV_USB_OTG_OEP_8 = 16,
-	STEDMA40_DEV_USB_OTG_OEP_1_9 = 17,
-	STEDMA40_DEV_USB_OTG_OEP_2_10= 18,
-	STEDMA40_DEV_USB_OTG_OEP_3_11 = 19,
-	STEDMA40_DEV_SLIM0_CH0_TX_HSI_TX_CH0 = 20,
-	STEDMA40_DEV_SLIM0_CH1_TX_HSI_TX_CH1 = 21,
-	STEDMA40_DEV_SLIM0_CH2_TX_HSI_TX_CH2 = 22,
-	STEDMA40_DEV_SLIM0_CH3_TX_HSI_TX_CH3 = 23,
-	STEDMA40_DEV_DST_SXA0_RX_TX = 24,
-	STEDMA40_DEV_DST_SXA1_RX_TX = 25,
-	STEDMA40_DEV_DST_SXA2_RX_TX = 26,
-	STEDMA40_DEV_DST_SXA3_RX_TX = 27,
-	STEDMA40_DEV_SD_MM2_TX = 28,
-	STEDMA40_DEV_SD_MM0_TX = 29,
-	STEDMA40_DEV_MSP1_TX = 30,
-	/*
-	 * This channel is either SlimBus or MSP,
-	 * never both at the same time.
-	 */
-	STEDMA40_SLIM0_CH0_TX = 31,
-	STEDMA40_DEV_MSP0_TX = 31,
-	STEDMA40_DEV_SD_MM1_TX = 32,
-	STEDMA40_DEV_SPI2_TX = 33,
-	/* Secondary I2C3 channel */
-	STEDMA40_DEV_I2C3_TX2 = 34,
-	STEDMA40_DEV_SPI1_TX = 35,
-	STEDMA40_DEV_USB_OTG_OEP_4_12 = 36,
-	STEDMA40_DEV_USB_OTG_OEP_5_13 = 37,
-	STEDMA40_DEV_USB_OTG_OEP_6_14 = 38,
-	STEDMA40_DEV_USB_OTG_OEP_7_15 = 39,
-	STEDMA40_DEV_SPI3_TX = 40,
-	STEDMA40_DEV_SD_MM3_TX = 41,
-	STEDMA40_DEV_SD_MM4_TX = 42,
-	STEDMA40_DEV_SD_MM5_TX = 43,
-	STEDMA40_DEV_DST_SXA4_RX_TX = 44,
-	STEDMA40_DEV_DST_SXA5_RX_TX = 45,
-	STEDMA40_DEV_DST_SXA6_RX_TX = 46,
-	STEDMA40_DEV_DST_SXA7_RX_TX = 47,
-	STEDMA40_DEV_CAC1_TX = 48,
-	STEDMA40_DEV_CAC1_TX_HAC1_TX = 49,
-	STEDMA40_DEV_HAC1_TX = 50,
-	STEDMA40_MEMCPY_TX_0 = 51,
-	STEDMA40_DEV_SLIM1_CH0_TX_HSI_TX_CH4 = 52,
-	STEDMA40_DEV_SLIM1_CH1_TX_HSI_TX_CH5 = 53,
-	STEDMA40_DEV_SLIM1_CH2_TX_HSI_TX_CH6 = 54,
-	STEDMA40_DEV_SLIM1_CH3_TX_HSI_TX_CH7 = 55,
-	STEDMA40_MEMCPY_TX_1 = 56,
-	STEDMA40_MEMCPY_TX_2 = 57,
-	STEDMA40_MEMCPY_TX_3 = 58,
-	STEDMA40_MEMCPY_TX_4 = 59,
-	STEDMA40_MEMCPY_TX_5 = 60,
-	STEDMA40_DEV_CAC0_TX = 61,
-	STEDMA40_DEV_CAC0_TX_HAC0_TX = 62,
-	STEDMA40_DEV_HAC0_TX = 63,
+	DB8500_DMA_DEV0_SPI0_TX = 0,
+	DB8500_DMA_DEV1_SD_MMC0_TX = 1,
+	DB8500_DMA_DEV2_SD_MMC1_TX = 2,
+	DB8500_DMA_DEV3_SD_MMC2_TX = 3,
+	DB8500_DMA_DEV4_I2C1_TX = 4,
+	DB8500_DMA_DEV5_I2C3_TX = 5,
+	DB8500_DMA_DEV6_I2C2_TX = 6,
+	DB8500_DMA_DEV7_I2C4_TX = 7, /* Only on V1 and later */
+	DB8500_DMA_DEV8_SSP0_TX = 8,
+	DB8500_DMA_DEV9_SSP1_TX = 9,
+	/* 10 is not used*/
+	DB8500_DMA_DEV11_UART2_TX = 11,
+	DB8500_DMA_DEV12_UART1_TX = 12,
+	DB8500_DMA_DEV13_UART0_TX = 13,
+	DB8500_DMA_DEV14_MSP2_TX = 14,
+	DB8500_DMA_DEV15_I2C0_TX = 15,
+	DB8500_DMA_DEV16_USB_OTG_OEP_7_15 = 16,
+	DB8500_DMA_DEV17_USB_OTG_OEP_6_14 = 17,
+	DB8500_DMA_DEV18_USB_OTG_OEP_5_13 = 18,
+	DB8500_DMA_DEV19_USB_OTG_OEP_4_12 = 19,
+	DB8500_DMA_DEV20_SLIM0_CH0_TX_HSI_TX_CH0 = 20,
+	DB8500_DMA_DEV21_SLIM0_CH1_TX_HSI_TX_CH1 = 21,
+	DB8500_DMA_DEV22_SLIM0_CH2_TX_HSI_TX_CH2 = 22,
+	DB8500_DMA_DEV23_SLIM0_CH3_TX_HSI_TX_CH3 = 23,
+	DB8500_DMA_DEV24_DST_SXA0_RX_TX = 24,
+	DB8500_DMA_DEV25_DST_SXA1_RX_TX = 25,
+	DB8500_DMA_DEV26_DST_SXA2_RX_TX = 26,
+	DB8500_DMA_DEV27_DST_SXA3_RX_TX = 27,
+	DB8500_DMA_DEV28_SD_MM2_TX = 28,
+	DB8500_DMA_DEV29_SD_MM0_TX = 29,
+	DB8500_DMA_DEV30_MSP1_TX = 30,
+	DB8500_DMA_DEV31_MSP0_TX_SLIM0_CH0_TX = 31,
+	DB8500_DMA_DEV32_SD_MM1_TX = 32,
+	DB8500_DMA_DEV33_SPI2_TX = 33,
+	DB8500_DMA_DEV34_I2C3_TX2 = 34,
+	DB8500_DMA_DEV35_SPI1_TX = 35,
+	DB8500_DMA_DEV36_USB_OTG_OEP_3_11 = 36,
+	DB8500_DMA_DEV37_USB_OTG_OEP_2_10 = 37,
+	DB8500_DMA_DEV38_USB_OTG_OEP_1_9 = 38,
+	DB8500_DMA_DEV39_USB_OTG_OEP_8 = 39,
+	DB8500_DMA_DEV40_SPI3_TX = 40,
+	DB8500_DMA_DEV41_SD_MM3_TX = 41,
+	DB8500_DMA_DEV42_SD_MM4_TX = 42,
+	DB8500_DMA_DEV43_SD_MM5_TX = 43,
+	DB8500_DMA_DEV44_DST_SXA4_RX_TX = 44,
+	DB8500_DMA_DEV45_DST_SXA5_RX_TX = 45,
+	DB8500_DMA_DEV46_SLIM0_CH8_TX_DST_SXA6_RX_TX = 46,
+	DB8500_DMA_DEV47_SLIM0_CH9_TX_DST_SXA7_RX_TX = 47,
+	DB8500_DMA_DEV48_CAC1_TX  = 48,
+	DB8500_DMA_DEV49_CAC1_TX_HAC1_TX = 49,
+	DB8500_DMA_DEV50_HAC1_TX = 50,
+	DB8500_DMA_MEMCPY_TX_0 = 51,
+	DB8500_DMA_DEV52_SLIM1_CH4_TX_HSI_TX_CH4 = 52,
+	DB8500_DMA_DEV53_SLIM1_CH5_TX_HSI_TX_CH5 = 53,
+	DB8500_DMA_DEV54_SLIM1_CH6_TX_HSI_TX_CH6 = 54,
+	DB8500_DMA_DEV55_SLIM1_CH7_TX_HSI_TX_CH7 = 55,
+	DB8500_DMA_MEMCPY_TX_1 = 56,
+	DB8500_DMA_MEMCPY_TX_2 = 57,
+	DB8500_DMA_MEMCPY_TX_3 = 58,
+	DB8500_DMA_MEMCPY_TX_4 = 59,
+	DB8500_DMA_MEMCPY_TX_5 = 60,
+	DB8500_DMA_DEV61_CAC0_TX = 61,
+	DB8500_DMA_DEV62_CAC0_TX_HAC0_TX = 62,
+	DB8500_DMA_DEV63_HAC0_TX = 63,
 };
 
 #endif
diff --git a/arch/arm/mach-versatile/include/mach/debug-macro.S b/arch/arm/mach-versatile/include/mach/debug-macro.S
index 6fea7199c62..eb2cf7dc5c4 100644
--- a/arch/arm/mach-versatile/include/mach/debug-macro.S
+++ b/arch/arm/mach-versatile/include/mach/debug-macro.S
@@ -11,13 +11,11 @@
  *
 */
 
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx,      #0x10000000
-		movne	\rx,      #0xf1000000	@ virtual base
-		orr	\rx, \rx, #0x001F0000
-		orr	\rx, \rx, #0x00001000
+		.macro	addruart, rp, rv
+		mov	\rp,      #0x001F0000
+		orr	\rp, \rp, #0x00001000
+		orr	\rv, \rp, #0xf1000000	@ virtual base
+		orr	\rp, \rp,  #0x10000000	@ physical base
 		.endm
 
 #include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-versatile/include/mach/vmalloc.h b/arch/arm/mach-versatile/include/mach/vmalloc.h
index 427e3612db5..ebd8a2543d3 100644
--- a/arch/arm/mach-versatile/include/mach/vmalloc.h
+++ b/arch/arm/mach-versatile/include/mach/vmalloc.h
@@ -18,4 +18,4 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#define VMALLOC_END		(PAGE_OFFSET + 0x18000000)
+#define VMALLOC_END		0xd8000000
diff --git a/arch/arm/mach-versatile/versatile_ab.c b/arch/arm/mach-versatile/versatile_ab.c
index bb8ec7724f7..aa9730fb13b 100644
--- a/arch/arm/mach-versatile/versatile_ab.c
+++ b/arch/arm/mach-versatile/versatile_ab.c
@@ -35,8 +35,6 @@
 
 MACHINE_START(VERSATILE_AB, "ARM-Versatile AB")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.phys_io	= 0x101f1000,
-	.io_pg_offst	= ((0xf11f1000) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.map_io		= versatile_map_io,
 	.init_irq	= versatile_init_irq,
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
index 239cd30fc4f..bf469642a3f 100644
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ b/arch/arm/mach-versatile/versatile_pb.c
@@ -108,8 +108,6 @@ static void __init versatile_pb_init(void)
 
 MACHINE_START(VERSATILE_PB, "ARM-Versatile PB")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.phys_io	= 0x101f1000,
-	.io_pg_offst	= ((0xf11f1000) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.map_io		= versatile_map_io,
 	.init_irq	= versatile_init_irq,
diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c
index 71fb1734952..c2e405a9e02 100644
--- a/arch/arm/mach-vexpress/ct-ca9x4.c
+++ b/arch/arm/mach-vexpress/ct-ca9x4.c
@@ -245,8 +245,6 @@ static void __init ct_ca9x4_init(void)
 }
 
 MACHINE_START(VEXPRESS, "ARM-Versatile Express CA9x4")
-	.phys_io	= V2M_UART0 & SECTION_MASK,
-	.io_pg_offst	= (__MMIO_P2V(V2M_UART0) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
 	.map_io		= ct_ca9x4_map_io,
 	.init_irq	= ct_ca9x4_init_irq,
diff --git a/arch/arm/mach-vexpress/include/mach/debug-macro.S b/arch/arm/mach-vexpress/include/mach/debug-macro.S
index 5167e2aceeb..050d65e02a4 100644
--- a/arch/arm/mach-vexpress/include/mach/debug-macro.S
+++ b/arch/arm/mach-vexpress/include/mach/debug-macro.S
@@ -12,12 +12,10 @@
 
 #define DEBUG_LL_UART_OFFSET	0x00009000
 
-		.macro	addruart,rx,tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx,      #0x10000000
-		movne	\rx,      #0xf8000000	@ virtual base
-		orr	\rx, \rx, #DEBUG_LL_UART_OFFSET
+		.macro	addruart,rp,rv
+		mov	\rp, #DEBUG_LL_UART_OFFSET
+		orr	\rv, \rp, #0xf8000000	@ virtual base
+		orr	\rp, \rp, #0x10000000	@ physical base
 		.endm
 
 #include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-vexpress/include/mach/smp.h b/arch/arm/mach-vexpress/include/mach/smp.h
index 72a9621ed08..5a6da4fd247 100644
--- a/arch/arm/mach-vexpress/include/mach/smp.h
+++ b/arch/arm/mach-vexpress/include/mach/smp.h
@@ -2,14 +2,7 @@
 #define __MACH_SMP_H
 
 #include <asm/hardware/gic.h>
-
-#define hard_smp_processor_id()				\
-	({						\
-		unsigned int cpunum;			\
-		__asm__("mrc p15, 0, %0, c0, c0, 5"	\
-			: "=r" (cpunum));		\
-		cpunum &= 0x0F;				\
-	})
+#include <asm/smp_mpidr.h>
 
 /*
  * We use IRQ1 as the IPI
diff --git a/arch/arm/mach-w90x900/mach-nuc910evb.c b/arch/arm/mach-w90x900/mach-nuc910evb.c
index ec05bda946f..30fccde94fb 100644
--- a/arch/arm/mach-w90x900/mach-nuc910evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc910evb.c
@@ -34,8 +34,6 @@ static void __init nuc910evb_init(void)
 
 MACHINE_START(W90P910EVB, "W90P910EVB")
 	/* Maintainer: Wan ZongShun */
-	.phys_io	= W90X900_PA_UART,
-	.io_pg_offst	= (((u32)W90X900_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= 0,
 	.map_io		= nuc910evb_map_io,
 	.init_irq	= nuc900_init_irq,
diff --git a/arch/arm/mach-w90x900/mach-nuc950evb.c b/arch/arm/mach-w90x900/mach-nuc950evb.c
index 04d295f89eb..590c99b96dc 100644
--- a/arch/arm/mach-w90x900/mach-nuc950evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc950evb.c
@@ -37,8 +37,6 @@ static void __init nuc950evb_init(void)
 
 MACHINE_START(W90P950EVB, "W90P950EVB")
 	/* Maintainer: Wan ZongShun */
-	.phys_io	= W90X900_PA_UART,
-	.io_pg_offst	= (((u32)W90X900_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= 0,
 	.map_io		= nuc950evb_map_io,
 	.init_irq	= nuc900_init_irq,
diff --git a/arch/arm/mach-w90x900/mach-nuc960evb.c b/arch/arm/mach-w90x900/mach-nuc960evb.c
index e3a46f19f2b..e09c645d61b 100644
--- a/arch/arm/mach-w90x900/mach-nuc960evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc960evb.c
@@ -34,8 +34,6 @@ static void __init nuc960evb_init(void)
 
 MACHINE_START(W90N960EVB, "W90N960EVB")
 	/* Maintainer: Wan ZongShun */
-	.phys_io	= W90X900_PA_UART,
-	.io_pg_offst	= (((u32)W90X900_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= 0,
 	.map_io		= nuc960evb_map_io,
 	.init_irq	= nuc900_init_irq,
diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S
index 86aa689ef1a..99fa688dfad 100644
--- a/arch/arm/mm/cache-v6.S
+++ b/arch/arm/mm/cache-v6.S
@@ -21,18 +21,22 @@
 #define D_CACHE_LINE_SIZE	32
 #define BTB_FLUSH_SIZE		8
 
-#ifdef CONFIG_ARM_ERRATA_411920
 /*
- * Invalidate the entire I cache (this code is a workaround for the ARM1136
- * erratum 411920 - Invalidate Instruction Cache operation can fail. This
- * erratum is present in 1136, 1156 and 1176. It does not affect the MPCore.
+ *	v6_flush_icache_all()
+ *
+ *	Flush the whole I-cache.
  *
- * Registers:
- *   r0 - set to 0
- *   r1 - corrupted
+ *	ARM1136 erratum 411920 - Invalidate Instruction Cache operation can fail.
+ *	This erratum is present in 1136, 1156 and 1176. It does not affect the
+ *	MPCore.
+ *
+ *	Registers:
+ *	r0 - set to 0
+ *	r1 - corrupted
  */
-ENTRY(v6_icache_inval_all)
+ENTRY(v6_flush_icache_all)
 	mov	r0, #0
+#ifdef CONFIG_ARM_ERRATA_411920
 	mrs	r1, cpsr
 	cpsid	ifa				@ disable interrupts
 	mcr	p15, 0, r0, c7, c5, 0		@ invalidate entire I-cache
@@ -43,8 +47,11 @@ ENTRY(v6_icache_inval_all)
 	.rept	11				@ ARM Ltd recommends at least
 	nop					@ 11 NOPs
 	.endr
-	mov	pc, lr
+#else
+	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I-cache
 #endif
+	mov	pc, lr
+ENDPROC(v6_flush_icache_all)
 
 /*
  *	v6_flush_cache_all()
@@ -60,7 +67,7 @@ ENTRY(v6_flush_kern_cache_all)
 #ifndef CONFIG_ARM_ERRATA_411920
 	mcr	p15, 0, r0, c7, c5, 0		@ I+BTB cache invalidate
 #else
-	b	v6_icache_inval_all
+	b	v6_flush_icache_all
 #endif
 #else
 	mcr	p15, 0, r0, c7, c15, 0		@ Cache clean+invalidate
@@ -138,7 +145,7 @@ ENTRY(v6_coherent_user_range)
 #ifndef CONFIG_ARM_ERRATA_411920
 	mcr	p15, 0, r0, c7, c5, 0		@ I+BTB cache invalidate
 #else
-	b	v6_icache_inval_all
+	b	v6_flush_icache_all
 #endif
 #else
 	mcr	p15, 0, r0, c7, c5, 6		@ invalidate BTB
@@ -312,6 +319,7 @@ ENDPROC(v6_dma_unmap_area)
 
 	.type	v6_cache_fns, #object
 ENTRY(v6_cache_fns)
+	.long	v6_flush_icache_all
 	.long	v6_flush_kern_cache_all
 	.long	v6_flush_user_cache_all
 	.long	v6_flush_user_cache_range
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index 37c8157e116..a3ebf7a4f49 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -18,6 +18,21 @@
 #include "proc-macros.S"
 
 /*
+ *	v7_flush_icache_all()
+ *
+ *	Flush the whole I-cache.
+ *
+ *	Registers:
+ *	r0 - set to 0
+ */
+ENTRY(v7_flush_icache_all)
+	mov	r0, #0
+	ALT_SMP(mcr	p15, 0, r0, c7, c1, 0)		@ invalidate I-cache inner shareable
+	ALT_UP(mcr	p15, 0, r0, c7, c5, 0)		@ I+BTB cache invalidate
+	mov	pc, lr
+ENDPROC(v7_flush_icache_all)
+
+/*
  *	v7_flush_dcache_all()
  *
  *	Flush the whole D-cache.
@@ -91,11 +106,8 @@ ENTRY(v7_flush_kern_cache_all)
  THUMB(	stmfd	sp!, {r4-r7, r9-r11, lr}	)
 	bl	v7_flush_dcache_all
 	mov	r0, #0
-#ifdef CONFIG_SMP
-	mcr	p15, 0, r0, c7, c1, 0		@ invalidate I-cache inner shareable
-#else
-	mcr	p15, 0, r0, c7, c5, 0		@ I+BTB cache invalidate
-#endif
+	ALT_SMP(mcr	p15, 0, r0, c7, c1, 0)	@ invalidate I-cache inner shareable
+	ALT_UP(mcr	p15, 0, r0, c7, c5, 0)	@ I+BTB cache invalidate
  ARM(	ldmfd	sp!, {r4-r5, r7, r9-r11, lr}	)
  THUMB(	ldmfd	sp!, {r4-r7, r9-r11, lr}	)
 	mov	pc, lr
@@ -171,11 +183,8 @@ ENTRY(v7_coherent_user_range)
 	cmp	r0, r1
 	blo	1b
 	mov	r0, #0
-#ifdef CONFIG_SMP
-	mcr	p15, 0, r0, c7, c1, 6		@ invalidate BTB Inner Shareable
-#else
-	mcr	p15, 0, r0, c7, c5, 6		@ invalidate BTB
-#endif
+	ALT_SMP(mcr	p15, 0, r0, c7, c1, 6)	@ invalidate BTB Inner Shareable
+	ALT_UP(mcr	p15, 0, r0, c7, c5, 6)	@ invalidate BTB
 	dsb
 	isb
 	mov	pc, lr
@@ -309,6 +318,7 @@ ENDPROC(v7_dma_unmap_area)
 
 	.type	v7_cache_fns, #object
 ENTRY(v7_cache_fns)
+	.long	v7_flush_icache_all
 	.long	v7_flush_kern_cache_all
 	.long	v7_flush_user_cache_all
 	.long	v7_flush_user_cache_range
diff --git a/arch/arm/mm/copypage-v4mc.c b/arch/arm/mm/copypage-v4mc.c
index 598c51ad507..b8061519ce7 100644
--- a/arch/arm/mm/copypage-v4mc.c
+++ b/arch/arm/mm/copypage-v4mc.c
@@ -73,7 +73,7 @@ void v4_mc_copy_user_highpage(struct page *to, struct page *from,
 {
 	void *kto = kmap_atomic(to, KM_USER1);
 
-	if (test_and_clear_bit(PG_dcache_dirty, &from->flags))
+	if (!test_and_set_bit(PG_dcache_clean, &from->flags))
 		__flush_dcache_page(page_mapping(from), from);
 
 	spin_lock(&minicache_lock);
diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c
index f55fa1044f7..bdba6c65c90 100644
--- a/arch/arm/mm/copypage-v6.c
+++ b/arch/arm/mm/copypage-v6.c
@@ -79,7 +79,7 @@ static void v6_copy_user_highpage_aliasing(struct page *to,
 	unsigned int offset = CACHE_COLOUR(vaddr);
 	unsigned long kfrom, kto;
 
-	if (test_and_clear_bit(PG_dcache_dirty, &from->flags))
+	if (!test_and_set_bit(PG_dcache_clean, &from->flags))
 		__flush_dcache_page(page_mapping(from), from);
 
 	/* FIXME: not highmem safe */
diff --git a/arch/arm/mm/copypage-xscale.c b/arch/arm/mm/copypage-xscale.c
index 9920c0ae209..649bbcd325b 100644
--- a/arch/arm/mm/copypage-xscale.c
+++ b/arch/arm/mm/copypage-xscale.c
@@ -95,7 +95,7 @@ void xscale_mc_copy_user_highpage(struct page *to, struct page *from,
 {
 	void *kto = kmap_atomic(to, KM_USER1);
 
-	if (test_and_clear_bit(PG_dcache_dirty, &from->flags))
+	if (!test_and_set_bit(PG_dcache_clean, &from->flags))
 		__flush_dcache_page(page_mapping(from), from);
 
 	spin_lock(&minicache_lock);
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 4bc43e535d3..e4dd0646e85 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -523,6 +523,12 @@ void ___dma_page_dev_to_cpu(struct page *page, unsigned long off,
 		outer_inv_range(paddr, paddr + size);
 
 	dma_cache_maint_page(page, off, size, dir, dmac_unmap_area);
+
+	/*
+	 * Mark the D-cache clean for this page to avoid extra flushing.
+	 */
+	if (dir != DMA_TO_DEVICE && off == 0 && size >= PAGE_SIZE)
+		set_bit(PG_dcache_clean, &page->flags);
 }
 EXPORT_SYMBOL(___dma_page_dev_to_cpu);
 
diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c
index 9b906dec1ca..8440d952ba6 100644
--- a/arch/arm/mm/fault-armv.c
+++ b/arch/arm/mm/fault-armv.c
@@ -28,6 +28,7 @@
 
 static unsigned long shared_pte_mask = L_PTE_MT_BUFFERABLE;
 
+#if __LINUX_ARM_ARCH__ < 6
 /*
  * We take the easy way out of this problem - we make the
  * PTE uncacheable.  However, we leave the write buffer on.
@@ -141,7 +142,7 @@ make_coherent(struct address_space *mapping, struct vm_area_struct *vma,
  * a page table, or changing an existing PTE.  Basically, there are two
  * things that we need to take care of:
  *
- *  1. If PG_dcache_dirty is set for the page, we need to ensure
+ *  1. If PG_dcache_clean is not set for the page, we need to ensure
  *     that any cache entries for the kernels virtual memory
  *     range are written back to the page.
  *  2. If we have multiple shared mappings of the same space in
@@ -168,10 +169,8 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr,
 		return;
 
 	mapping = page_mapping(page);
-#ifndef CONFIG_SMP
-	if (test_and_clear_bit(PG_dcache_dirty, &page->flags))
+	if (!test_and_set_bit(PG_dcache_clean, &page->flags))
 		__flush_dcache_page(mapping, page);
-#endif
 	if (mapping) {
 		if (cache_is_vivt())
 			make_coherent(mapping, vma, addr, ptep, pfn);
@@ -179,6 +178,7 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr,
 			__flush_icache_all();
 	}
 }
+#endif	/* __LINUX_ARM_ARCH__ < 6 */
 
 /*
  * Check whether the write buffer has physical address aliasing
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 23b0b03af5e..1e21e125fe3 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -581,6 +581,19 @@ static struct fsr_info ifsr_info[] = {
 	{ do_bad,		SIGBUS,  0,		"unknown 31"			   },
 };
 
+void __init
+hook_ifault_code(int nr, int (*fn)(unsigned long, unsigned int, struct pt_regs *),
+		 int sig, int code, const char *name)
+{
+	if (nr < 0 || nr >= ARRAY_SIZE(ifsr_info))
+		BUG();
+
+	ifsr_info[nr].fn   = fn;
+	ifsr_info[nr].sig  = sig;
+	ifsr_info[nr].code = code;
+	ifsr_info[nr].name = name;
+}
+
 asmlinkage void __exception
 do_PrefetchAbort(unsigned long addr, unsigned int ifsr, struct pt_regs *regs)
 {
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index c6844cb9b50..391ffae7509 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -17,6 +17,7 @@
 #include <asm/smp_plat.h>
 #include <asm/system.h>
 #include <asm/tlbflush.h>
+#include <asm/smp_plat.h>
 
 #include "mm.h"
 
@@ -39,6 +40,18 @@ static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr)
 	    : "cc");
 }
 
+static void flush_icache_alias(unsigned long pfn, unsigned long vaddr, unsigned long len)
+{
+	unsigned long colour = CACHE_COLOUR(vaddr);
+	unsigned long offset = vaddr & (PAGE_SIZE - 1);
+	unsigned long to;
+
+	set_pte_ext(TOP_PTE(ALIAS_FLUSH_START) + colour, pfn_pte(pfn, PAGE_KERNEL), 0);
+	to = ALIAS_FLUSH_START + (colour << PAGE_SHIFT) + offset;
+	flush_tlb_kernel_page(to);
+	flush_icache_range(to, to + len);
+}
+
 void flush_cache_mm(struct mm_struct *mm)
 {
 	if (cache_is_vivt()) {
@@ -89,16 +102,16 @@ void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsig
 	if (vma->vm_flags & VM_EXEC && icache_is_vivt_asid_tagged())
 		__flush_icache_all();
 }
+
 #else
-#define flush_pfn_alias(pfn,vaddr)	do { } while (0)
+#define flush_pfn_alias(pfn,vaddr)		do { } while (0)
+#define flush_icache_alias(pfn,vaddr,len)	do { } while (0)
 #endif
 
-#ifdef CONFIG_SMP
 static void flush_ptrace_access_other(void *args)
 {
 	__flush_icache_all();
 }
-#endif
 
 static
 void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
@@ -118,15 +131,16 @@ void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
 		return;
 	}
 
-	/* VIPT non-aliasing cache */
+	/* VIPT non-aliasing D-cache */
 	if (vma->vm_flags & VM_EXEC) {
 		unsigned long addr = (unsigned long)kaddr;
-		__cpuc_coherent_kern_range(addr, addr + len);
-#ifdef CONFIG_SMP
+		if (icache_is_vipt_aliasing())
+			flush_icache_alias(page_to_pfn(page), uaddr, len);
+		else
+			__cpuc_coherent_kern_range(addr, addr + len);
 		if (cache_ops_need_broadcast())
 			smp_call_function(flush_ptrace_access_other,
 					  NULL, 1);
-#endif
 	}
 }
 
@@ -215,6 +229,36 @@ static void __flush_dcache_aliases(struct address_space *mapping, struct page *p
 	flush_dcache_mmap_unlock(mapping);
 }
 
+#if __LINUX_ARM_ARCH__ >= 6
+void __sync_icache_dcache(pte_t pteval)
+{
+	unsigned long pfn;
+	struct page *page;
+	struct address_space *mapping;
+
+	if (!pte_present_user(pteval))
+		return;
+	if (cache_is_vipt_nonaliasing() && !pte_exec(pteval))
+		/* only flush non-aliasing VIPT caches for exec mappings */
+		return;
+	pfn = pte_pfn(pteval);
+	if (!pfn_valid(pfn))
+		return;
+
+	page = pfn_to_page(pfn);
+	if (cache_is_vipt_aliasing())
+		mapping = page_mapping(page);
+	else
+		mapping = NULL;
+
+	if (!test_and_set_bit(PG_dcache_clean, &page->flags))
+		__flush_dcache_page(mapping, page);
+	/* pte_exec() already checked above for non-aliasing VIPT cache */
+	if (cache_is_vipt_nonaliasing() || pte_exec(pteval))
+		__flush_icache_all();
+}
+#endif
+
 /*
  * Ensure cache coherency between kernel mapping and userspace mapping
  * of this page.
@@ -246,17 +290,16 @@ void flush_dcache_page(struct page *page)
 
 	mapping = page_mapping(page);
 
-#ifndef CONFIG_SMP
-	if (!PageHighMem(page) && mapping && !mapping_mapped(mapping))
-		set_bit(PG_dcache_dirty, &page->flags);
-	else
-#endif
-	{
+	if (!cache_ops_need_broadcast() &&
+	    mapping && !mapping_mapped(mapping))
+		clear_bit(PG_dcache_clean, &page->flags);
+	else {
 		__flush_dcache_page(mapping, page);
 		if (mapping && cache_is_vivt())
 			__flush_dcache_aliases(mapping, page);
 		else if (mapping)
 			__flush_icache_all();
+		set_bit(PG_dcache_clean, &page->flags);
 	}
 }
 EXPORT_SYMBOL(flush_dcache_page);
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 7185b00650f..36c4553ffcc 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -277,7 +277,7 @@ void __init arm_memblock_init(struct meminfo *mi, struct machine_desc *mdesc)
 
 	/* Register the kernel text, kernel data and initrd with memblock. */
 #ifdef CONFIG_XIP_KERNEL
-	memblock_reserve(__pa(_data), _end - _data);
+	memblock_reserve(__pa(_sdata), _end - _sdata);
 #else
 	memblock_reserve(__pa(_stext), _end - _stext);
 #endif
@@ -545,7 +545,7 @@ void __init mem_init(void)
 
 			MLK_ROUNDUP(__init_begin, __init_end),
 			MLK_ROUNDUP(_text, _etext),
-			MLK_ROUNDUP(_data, _edata));
+			MLK_ROUNDUP(_sdata, _edata));
 
 #undef MLK
 #undef MLM
diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c
index 4f5b39687df..b0a98305055 100644
--- a/arch/arm/mm/mmap.c
+++ b/arch/arm/mm/mmap.c
@@ -144,3 +144,25 @@ int valid_mmap_phys_addr_range(unsigned long pfn, size_t size)
 {
 	return !(pfn + (size >> PAGE_SHIFT) > 0x00100000);
 }
+
+#ifdef CONFIG_STRICT_DEVMEM
+
+#include <linux/ioport.h>
+
+/*
+ * devmem_is_allowed() checks to see if /dev/mem access to a certain
+ * address is valid. The argument is a physical page number.
+ * We mimic x86 here by disallowing access to system RAM as well as
+ * device-exclusive MMIO regions. This effectively disable read()/write()
+ * on /dev/mem.
+ */
+int devmem_is_allowed(unsigned long pfn)
+{
+	if (iomem_is_exclusive(pfn << PAGE_SHIFT))
+		return 0;
+	if (!page_is_ram(pfn))
+		return 1;
+	return 0;
+}
+
+#endif
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index e8ed9dc461f..c32f731d56d 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -310,9 +310,8 @@ static void __init build_mem_type_table(void)
 			cachepolicy = CPOLICY_WRITEBACK;
 		ecc_mask = 0;
 	}
-#ifdef CONFIG_SMP
-	cachepolicy = CPOLICY_WRITEALLOC;
-#endif
+	if (is_smp())
+		cachepolicy = CPOLICY_WRITEALLOC;
 
 	/*
 	 * Strip out features not present on earlier architectures.
@@ -406,13 +405,11 @@ static void __init build_mem_type_table(void)
 	cp = &cache_policies[cachepolicy];
 	vecs_pgprot = kern_pgprot = user_pgprot = cp->pte;
 
-#ifndef CONFIG_SMP
 	/*
 	 * Only use write-through for non-SMP systems
 	 */
-	if (cpu_arch >= CPU_ARCH_ARMv5 && cachepolicy > CPOLICY_WRITETHROUGH)
+	if (!is_smp() && cpu_arch >= CPU_ARCH_ARMv5 && cachepolicy > CPOLICY_WRITETHROUGH)
 		vecs_pgprot = cache_policies[CPOLICY_WRITETHROUGH].pte;
-#endif
 
 	/*
 	 * Enable CPU-specific coherency if supported.
@@ -436,22 +433,23 @@ static void __init build_mem_type_table(void)
 		mem_types[MT_MINICLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
 		mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
 
-#ifdef CONFIG_SMP
-		/*
-		 * Mark memory with the "shared" attribute for SMP systems
-		 */
-		user_pgprot |= L_PTE_SHARED;
-		kern_pgprot |= L_PTE_SHARED;
-		vecs_pgprot |= L_PTE_SHARED;
-		mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_S;
-		mem_types[MT_DEVICE_WC].prot_pte |= L_PTE_SHARED;
-		mem_types[MT_DEVICE_CACHED].prot_sect |= PMD_SECT_S;
-		mem_types[MT_DEVICE_CACHED].prot_pte |= L_PTE_SHARED;
-		mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
-		mem_types[MT_MEMORY].prot_pte |= L_PTE_SHARED;
-		mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S;
-		mem_types[MT_MEMORY_NONCACHED].prot_pte |= L_PTE_SHARED;
-#endif
+		if (is_smp()) {
+			/*
+			 * Mark memory with the "shared" attribute
+			 * for SMP systems
+			 */
+			user_pgprot |= L_PTE_SHARED;
+			kern_pgprot |= L_PTE_SHARED;
+			vecs_pgprot |= L_PTE_SHARED;
+			mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_S;
+			mem_types[MT_DEVICE_WC].prot_pte |= L_PTE_SHARED;
+			mem_types[MT_DEVICE_CACHED].prot_sect |= PMD_SECT_S;
+			mem_types[MT_DEVICE_CACHED].prot_pte |= L_PTE_SHARED;
+			mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
+			mem_types[MT_MEMORY].prot_pte |= L_PTE_SHARED;
+			mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S;
+			mem_types[MT_MEMORY_NONCACHED].prot_pte |= L_PTE_SHARED;
+		}
 	}
 
 	/*
@@ -829,8 +827,7 @@ static void __init sanity_check_meminfo(void)
 			 * rather difficult.
 			 */
 			reason = "with VIPT aliasing cache";
-#ifdef CONFIG_SMP
-		} else if (tlb_ops_need_broadcast()) {
+		} else if (is_smp() && tlb_ops_need_broadcast()) {
 			/*
 			 * kmap_high needs to occasionally flush TLB entries,
 			 * however, if the TLB entries need to be broadcast
@@ -840,7 +837,6 @@ static void __init sanity_check_meminfo(void)
 			 *   (must not be called with irqs off)
 			 */
 			reason = "without hardware TLB ops broadcasting";
-#endif
 		}
 		if (reason) {
 			printk(KERN_CRIT "HIGHMEM is not supported %s, ignoring high memory\n",
diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S
index 203a4e944d9..a6f5f8475b9 100644
--- a/arch/arm/mm/proc-arm1020.S
+++ b/arch/arm/mm/proc-arm1020.S
@@ -430,7 +430,7 @@ ENTRY(cpu_arm1020_set_pte_ext)
 #endif /* CONFIG_MMU */
 	mov	pc, lr
 
-	__INIT
+	__CPUINIT
 
 	.type	__arm1020_setup, #function
 __arm1020_setup:
diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S
index 1a511e76590..afc06b9c313 100644
--- a/arch/arm/mm/proc-arm1020e.S
+++ b/arch/arm/mm/proc-arm1020e.S
@@ -412,7 +412,7 @@ ENTRY(cpu_arm1020e_set_pte_ext)
 #endif /* CONFIG_MMU */
 	mov	pc, lr
 
-	__INIT
+	__CPUINIT
 
 	.type	__arm1020e_setup, #function
 __arm1020e_setup:
diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S
index 1ffa4eb9c34..8915e0ba3fe 100644
--- a/arch/arm/mm/proc-arm1022.S
+++ b/arch/arm/mm/proc-arm1022.S
@@ -394,7 +394,7 @@ ENTRY(cpu_arm1022_set_pte_ext)
 #endif /* CONFIG_MMU */
 	mov	pc, lr
 
-	__INIT
+	__CPUINIT
 
 	.type	__arm1022_setup, #function
 __arm1022_setup:
diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S
index 5697c34b95b..ff446c5d476 100644
--- a/arch/arm/mm/proc-arm1026.S
+++ b/arch/arm/mm/proc-arm1026.S
@@ -384,7 +384,7 @@ ENTRY(cpu_arm1026_set_pte_ext)
 	mov	pc, lr
 
 
-	__INIT
+	__CPUINIT
 
 	.type	__arm1026_setup, #function
 __arm1026_setup:
diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S
index 64e0b327c7c..6a7be1863ed 100644
--- a/arch/arm/mm/proc-arm6_7.S
+++ b/arch/arm/mm/proc-arm6_7.S
@@ -238,7 +238,7 @@ ENTRY(cpu_arm7_reset)
 		mcr	p15, 0, r1, c1, c0, 0		@ turn off MMU etc
 		mov	pc, r0
 
-		__INIT
+		__CPUINIT
 
 		.type	__arm6_setup, #function
 __arm6_setup:	mov	r0, #0
diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S
index 9d96824134f..c285395f44b 100644
--- a/arch/arm/mm/proc-arm720.S
+++ b/arch/arm/mm/proc-arm720.S
@@ -113,7 +113,7 @@ ENTRY(cpu_arm720_reset)
 		mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
 		mov	pc, r0
 
-	__INIT
+	__CPUINIT
 
 	.type	__arm710_setup, #function
 __arm710_setup:
diff --git a/arch/arm/mm/proc-arm740.S b/arch/arm/mm/proc-arm740.S
index 6c1a9ab059a..38b27dcba72 100644
--- a/arch/arm/mm/proc-arm740.S
+++ b/arch/arm/mm/proc-arm740.S
@@ -55,7 +55,7 @@ ENTRY(cpu_arm740_reset)
 	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
 	mov	pc, r0
 
-	__INIT
+	__CPUINIT
 
 	.type	__arm740_setup, #function
 __arm740_setup:
diff --git a/arch/arm/mm/proc-arm7tdmi.S b/arch/arm/mm/proc-arm7tdmi.S
index 6a850dbba22..0c9786de20a 100644
--- a/arch/arm/mm/proc-arm7tdmi.S
+++ b/arch/arm/mm/proc-arm7tdmi.S
@@ -46,7 +46,7 @@ ENTRY(cpu_arm7tdmi_proc_fin)
 ENTRY(cpu_arm7tdmi_reset)
 		mov	pc, r0
 
-		__INIT
+		__CPUINIT
 
 		.type	__arm7tdmi_setup, #function
 __arm7tdmi_setup:
diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
index 86f80aa5621..fecf570939f 100644
--- a/arch/arm/mm/proc-arm920.S
+++ b/arch/arm/mm/proc-arm920.S
@@ -375,7 +375,7 @@ ENTRY(cpu_arm920_set_pte_ext)
 #endif
 	mov	pc, lr
 
-	__INIT
+	__CPUINIT
 
 	.type	__arm920_setup, #function
 __arm920_setup:
diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S
index f76ce9b6288..e3cbf87c948 100644
--- a/arch/arm/mm/proc-arm922.S
+++ b/arch/arm/mm/proc-arm922.S
@@ -379,7 +379,7 @@ ENTRY(cpu_arm922_set_pte_ext)
 #endif /* CONFIG_MMU */
 	mov	pc, lr
 
-	__INIT
+	__CPUINIT
 
 	.type	__arm922_setup, #function
 __arm922_setup:
diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S
index 657bd3f7c15..572424c867b 100644
--- a/arch/arm/mm/proc-arm925.S
+++ b/arch/arm/mm/proc-arm925.S
@@ -428,7 +428,7 @@ ENTRY(cpu_arm925_set_pte_ext)
 #endif /* CONFIG_MMU */
 	mov	pc, lr
 
-	__INIT
+	__CPUINIT
 
 	.type	__arm925_setup, #function
 __arm925_setup:
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index 73f1f3c6891..63d168b4ebe 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -389,7 +389,7 @@ ENTRY(cpu_arm926_set_pte_ext)
 #endif
 	mov	pc, lr
 
-	__INIT
+	__CPUINIT
 
 	.type	__arm926_setup, #function
 __arm926_setup:
diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S
index fffb061a45a..f6a62822418 100644
--- a/arch/arm/mm/proc-arm940.S
+++ b/arch/arm/mm/proc-arm940.S
@@ -264,7 +264,7 @@ ENTRY(arm940_cache_fns)
 	.long	arm940_dma_unmap_area
 	.long	arm940_dma_flush_range
 
-	__INIT
+	__CPUINIT
 
 	.type	__arm940_setup, #function
 __arm940_setup:
diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S
index 249a6053760..ea2e7f2eb95 100644
--- a/arch/arm/mm/proc-arm946.S
+++ b/arch/arm/mm/proc-arm946.S
@@ -317,7 +317,7 @@ ENTRY(cpu_arm946_dcache_clean_area)
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	mov	pc, lr
 
-	__INIT
+	__CPUINIT
 
 	.type	__arm946_setup, #function
 __arm946_setup:
diff --git a/arch/arm/mm/proc-arm9tdmi.S b/arch/arm/mm/proc-arm9tdmi.S
index db475667fac..db67e3134d7 100644
--- a/arch/arm/mm/proc-arm9tdmi.S
+++ b/arch/arm/mm/proc-arm9tdmi.S
@@ -46,7 +46,7 @@ ENTRY(cpu_arm9tdmi_proc_fin)
 ENTRY(cpu_arm9tdmi_reset)
 		mov	pc, r0
 
-		__INIT
+		__CPUINIT
 
 		.type	__arm9tdmi_setup, #function
 __arm9tdmi_setup:
diff --git a/arch/arm/mm/proc-fa526.S b/arch/arm/mm/proc-fa526.S
index 7803fdf7002..7c9ad621f0e 100644
--- a/arch/arm/mm/proc-fa526.S
+++ b/arch/arm/mm/proc-fa526.S
@@ -134,7 +134,7 @@ ENTRY(cpu_fa526_set_pte_ext)
 #endif
 	mov	pc, lr
 
-	__INIT
+	__CPUINIT
 
 	.type	__fa526_setup, #function
 __fa526_setup:
diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S
index b304d0104a4..578da69200c 100644
--- a/arch/arm/mm/proc-feroceon.S
+++ b/arch/arm/mm/proc-feroceon.S
@@ -494,7 +494,7 @@ ENTRY(cpu_feroceon_set_pte_ext)
 #endif
 	mov	pc, lr
 
-	__INIT
+	__CPUINIT
 
 	.type	__feroceon_setup, #function
 __feroceon_setup:
diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S
index 5f6892fcc16..4458ee6aa71 100644
--- a/arch/arm/mm/proc-mohawk.S
+++ b/arch/arm/mm/proc-mohawk.S
@@ -338,7 +338,7 @@ ENTRY(cpu_mohawk_set_pte_ext)
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	mov	pc, lr
 
-	__INIT
+	__CPUINIT
 
 	.type	__mohawk_setup, #function
 __mohawk_setup:
diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S
index a201eb04b5e..5aa8d59c2e8 100644
--- a/arch/arm/mm/proc-sa110.S
+++ b/arch/arm/mm/proc-sa110.S
@@ -156,7 +156,7 @@ ENTRY(cpu_sa110_set_pte_ext)
 #endif
 	mov	pc, lr
 
-	__INIT
+	__CPUINIT
 
 	.type	__sa110_setup, #function
 __sa110_setup:
diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S
index 7ddc4805bf9..2ac4e6f1071 100644
--- a/arch/arm/mm/proc-sa1100.S
+++ b/arch/arm/mm/proc-sa1100.S
@@ -169,7 +169,7 @@ ENTRY(cpu_sa1100_set_pte_ext)
 #endif
 	mov	pc, lr
 
-	__INIT
+	__CPUINIT
 
 	.type	__sa1100_setup, #function
 __sa1100_setup:
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 22aac851519..59a7e1ffe7b 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -30,13 +30,10 @@
 #define TTB_RGN_WT	(2 << 3)
 #define TTB_RGN_WB	(3 << 3)
 
-#ifndef CONFIG_SMP
-#define TTB_FLAGS	TTB_RGN_WBWA
-#define PMD_FLAGS	PMD_SECT_WB
-#else
-#define TTB_FLAGS	TTB_RGN_WBWA|TTB_S
-#define PMD_FLAGS	PMD_SECT_WBWA|PMD_SECT_S
-#endif
+#define TTB_FLAGS_UP	TTB_RGN_WBWA
+#define PMD_FLAGS_UP	PMD_SECT_WB
+#define TTB_FLAGS_SMP	TTB_RGN_WBWA|TTB_S
+#define PMD_FLAGS_SMP	PMD_SECT_WBWA|PMD_SECT_S
 
 ENTRY(cpu_v6_proc_init)
 	mov	pc, lr
@@ -97,7 +94,8 @@ ENTRY(cpu_v6_switch_mm)
 #ifdef CONFIG_MMU
 	mov	r2, #0
 	ldr	r1, [r1, #MM_CONTEXT_ID]	@ get mm->context.id
-	orr	r0, r0, #TTB_FLAGS
+	ALT_SMP(orr	r0, r0, #TTB_FLAGS_SMP)
+	ALT_UP(orr	r0, r0, #TTB_FLAGS_UP)
 	mcr	p15, 0, r2, c7, c5, 6		@ flush BTAC/BTB
 	mcr	p15, 0, r2, c7, c10, 4		@ drain write buffer
 	mcr	p15, 0, r0, c2, c0, 0		@ set TTB 0
@@ -137,7 +135,7 @@ cpu_pj4_name:
 
 	.align
 
-	__INIT
+	__CPUINIT
 
 /*
  *	__v6_setup
@@ -156,9 +154,11 @@ cpu_pj4_name:
  */
 __v6_setup:
 #ifdef CONFIG_SMP
-	mrc	p15, 0, r0, c1, c0, 1		@ Enable SMP/nAMP mode
+	ALT_SMP(mrc	p15, 0, r0, c1, c0, 1)	@ Enable SMP/nAMP mode
+	ALT_UP(nop)
 	orr	r0, r0, #0x20
-	mcr	p15, 0, r0, c1, c0, 1
+	ALT_SMP(mcr	p15, 0, r0, c1, c0, 1)
+	ALT_UP(nop)
 #endif
 
 	mov	r0, #0
@@ -169,7 +169,8 @@ __v6_setup:
 #ifdef CONFIG_MMU
 	mcr	p15, 0, r0, c8, c7, 0		@ invalidate I + D TLBs
 	mcr	p15, 0, r0, c2, c0, 2		@ TTB control register
-	orr	r4, r4, #TTB_FLAGS
+	ALT_SMP(orr	r4, r4, #TTB_FLAGS_SMP)
+	ALT_UP(orr	r4, r4, #TTB_FLAGS_UP)
 	mcr	p15, 0, r4, c2, c0, 1		@ load TTB1
 #endif /* CONFIG_MMU */
 	adr	r5, v6_crval
@@ -192,6 +193,8 @@ __v6_setup:
 v6_crval:
 	crval	clear=0x01e0fb7f, mmuset=0x00c0387d, ucset=0x00c0187c
 
+	__INITDATA
+
 	.type	v6_processor_functions, #object
 ENTRY(v6_processor_functions)
 	.word	v6_early_abort
@@ -205,6 +208,8 @@ ENTRY(v6_processor_functions)
 	.word	cpu_v6_set_pte_ext
 	.size	v6_processor_functions, . - v6_processor_functions
 
+	.section ".rodata"
+
 	.type	cpu_arch_name, #object
 cpu_arch_name:
 	.asciz	"armv6"
@@ -225,10 +230,16 @@ cpu_elf_name:
 __v6_proc_info:
 	.long	0x0007b000
 	.long	0x0007f000
-	.long   PMD_TYPE_SECT | \
+	ALT_SMP(.long \
+		PMD_TYPE_SECT | \
 		PMD_SECT_AP_WRITE | \
 		PMD_SECT_AP_READ | \
-		PMD_FLAGS
+		PMD_FLAGS_SMP)
+	ALT_UP(.long \
+		PMD_TYPE_SECT | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ | \
+		PMD_FLAGS_UP)
 	.long   PMD_TYPE_SECT | \
 		PMD_SECT_XN | \
 		PMD_SECT_AP_WRITE | \
@@ -249,10 +260,16 @@ __v6_proc_info:
 __pj4_v6_proc_info:
 	.long	0x560f5810
 	.long	0xff0ffff0
-	.long   PMD_TYPE_SECT | \
+	ALT_SMP(.long \
+		PMD_TYPE_SECT | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ | \
+		PMD_FLAGS_SMP)
+	ALT_UP(.long \
+		PMD_TYPE_SECT | \
 		PMD_SECT_AP_WRITE | \
 		PMD_SECT_AP_READ | \
-		PMD_FLAGS
+		PMD_FLAGS_UP)
 	.long   PMD_TYPE_SECT | \
 		PMD_SECT_XN | \
 		PMD_SECT_AP_WRITE | \
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 197f21bed5e..53cbe222515 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -30,15 +30,13 @@
 #define TTB_IRGN_WT	((1 << 0) | (0 << 6))
 #define TTB_IRGN_WB	((1 << 0) | (1 << 6))
 
-#ifndef CONFIG_SMP
 /* PTWs cacheable, inner WB not shareable, outer WB not shareable */
-#define TTB_FLAGS	TTB_IRGN_WB|TTB_RGN_OC_WB
-#define PMD_FLAGS	PMD_SECT_WB
-#else
+#define TTB_FLAGS_UP	TTB_IRGN_WB|TTB_RGN_OC_WB
+#define PMD_FLAGS_UP	PMD_SECT_WB
+
 /* PTWs cacheable, inner WBWA shareable, outer WBWA not shareable */
-#define TTB_FLAGS	TTB_IRGN_WBWA|TTB_S|TTB_NOS|TTB_RGN_OC_WBWA
-#define PMD_FLAGS	PMD_SECT_WBWA|PMD_SECT_S
-#endif
+#define TTB_FLAGS_SMP	TTB_IRGN_WBWA|TTB_S|TTB_NOS|TTB_RGN_OC_WBWA
+#define PMD_FLAGS_SMP	PMD_SECT_WBWA|PMD_SECT_S
 
 ENTRY(cpu_v7_proc_init)
 	mov	pc, lr
@@ -105,7 +103,8 @@ ENTRY(cpu_v7_switch_mm)
 #ifdef CONFIG_MMU
 	mov	r2, #0
 	ldr	r1, [r1, #MM_CONTEXT_ID]	@ get mm->context.id
-	orr	r0, r0, #TTB_FLAGS
+	ALT_SMP(orr	r0, r0, #TTB_FLAGS_SMP)
+	ALT_UP(orr	r0, r0, #TTB_FLAGS_UP)
 #ifdef CONFIG_ARM_ERRATA_430973
 	mcr	p15, 0, r2, c7, c5, 6		@ flush BTAC/BTB
 #endif
@@ -169,7 +168,7 @@ cpu_v7_name:
 	.ascii	"ARMv7 Processor"
 	.align
 
-	__INIT
+	__CPUINIT
 
 /*
  *	__v7_setup
@@ -188,7 +187,8 @@ cpu_v7_name:
  */
 __v7_ca9mp_setup:
 #ifdef CONFIG_SMP
-	mrc	p15, 0, r0, c1, c0, 1
+	ALT_SMP(mrc	p15, 0, r0, c1, c0, 1)
+	ALT_UP(mov	r0, #(1 << 6))		@ fake it for UP
 	tst	r0, #(1 << 6)			@ SMP/nAMP mode enabled?
 	orreq	r0, r0, #(1 << 6) | (1 << 0)	@ Enable SMP/nAMP mode and
 	mcreq	p15, 0, r0, c1, c0, 1		@ TLB ops broadcasting
@@ -270,7 +270,8 @@ __v7_setup:
 #ifdef CONFIG_MMU
 	mcr	p15, 0, r10, c8, c7, 0		@ invalidate I + D TLBs
 	mcr	p15, 0, r10, c2, c0, 2		@ TTB control register
-	orr	r4, r4, #TTB_FLAGS
+	ALT_SMP(orr	r4, r4, #TTB_FLAGS_SMP)
+	ALT_UP(orr	r4, r4, #TTB_FLAGS_UP)
 	mcr	p15, 0, r4, c2, c0, 1		@ load TTB1
 	mov	r10, #0x1f			@ domains 0, 1 = manager
 	mcr	p15, 0, r10, c3, c0, 0		@ load domain access register
@@ -332,6 +333,8 @@ v7_crval:
 __v7_setup_stack:
 	.space	4 * 11				@ 11 registers
 
+	__INITDATA
+
 	.type	v7_processor_functions, #object
 ENTRY(v7_processor_functions)
 	.word	v7_early_abort
@@ -345,6 +348,8 @@ ENTRY(v7_processor_functions)
 	.word	cpu_v7_set_pte_ext
 	.size	v7_processor_functions, . - v7_processor_functions
 
+	.section ".rodata"
+
 	.type	cpu_arch_name, #object
 cpu_arch_name:
 	.asciz	"armv7"
@@ -362,10 +367,16 @@ cpu_elf_name:
 __v7_ca9mp_proc_info:
 	.long	0x410fc090		@ Required ID value
 	.long	0xff0ffff0		@ Mask for ID
-	.long   PMD_TYPE_SECT | \
+	ALT_SMP(.long \
+		PMD_TYPE_SECT | \
 		PMD_SECT_AP_WRITE | \
 		PMD_SECT_AP_READ | \
-		PMD_FLAGS
+		PMD_FLAGS_SMP)
+	ALT_UP(.long \
+		PMD_TYPE_SECT | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ | \
+		PMD_FLAGS_UP)
 	.long   PMD_TYPE_SECT | \
 		PMD_SECT_XN | \
 		PMD_SECT_AP_WRITE | \
@@ -388,10 +399,16 @@ __v7_ca9mp_proc_info:
 __v7_proc_info:
 	.long	0x000f0000		@ Required ID value
 	.long	0x000f0000		@ Mask for ID
-	.long   PMD_TYPE_SECT | \
+	ALT_SMP(.long \
+		PMD_TYPE_SECT | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ | \
+		PMD_FLAGS_SMP)
+	ALT_UP(.long \
+		PMD_TYPE_SECT | \
 		PMD_SECT_AP_WRITE | \
 		PMD_SECT_AP_READ | \
-		PMD_FLAGS
+		PMD_FLAGS_UP)
 	.long   PMD_TYPE_SECT | \
 		PMD_SECT_XN | \
 		PMD_SECT_AP_WRITE | \
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index 361a51e4903..cad07e40304 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -404,7 +404,7 @@ ENTRY(cpu_xsc3_set_pte_ext)
 
 	.align
 
-	__INIT
+	__CPUINIT
 
 	.type	__xsc3_setup, #function
 __xsc3_setup:
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index 14075979bcb..cb245edb2c2 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -506,7 +506,7 @@ ENTRY(cpu_xscale_set_pte_ext)
 
 	.align
 
-	__INIT
+	__CPUINIT
 
 	.type	__xscale_setup, #function
 __xscale_setup:
diff --git a/arch/arm/mm/tlb-v7.S b/arch/arm/mm/tlb-v7.S
index f3f288a9546..53cd5b45467 100644
--- a/arch/arm/mm/tlb-v7.S
+++ b/arch/arm/mm/tlb-v7.S
@@ -13,6 +13,7 @@
  */
 #include <linux/init.h>
 #include <linux/linkage.h>
+#include <asm/assembler.h>
 #include <asm/asm-offsets.h>
 #include <asm/page.h>
 #include <asm/tlbflush.h>
@@ -41,20 +42,15 @@ ENTRY(v7wbi_flush_user_tlb_range)
 	orr	r0, r3, r0, lsl #PAGE_SHIFT	@ Create initial MVA
 	mov	r1, r1, lsl #PAGE_SHIFT
 1:
-#ifdef CONFIG_SMP
-	mcr	p15, 0, r0, c8, c3, 1		@ TLB invalidate U MVA (shareable) 
-#else
-	mcr	p15, 0, r0, c8, c7, 1		@ TLB invalidate U MVA
-#endif
+	ALT_SMP(mcr	p15, 0, r0, c8, c3, 1)	@ TLB invalidate U MVA (shareable)
+	ALT_UP(mcr	p15, 0, r0, c8, c7, 1)	@ TLB invalidate U MVA
+
 	add	r0, r0, #PAGE_SZ
 	cmp	r0, r1
 	blo	1b
 	mov	ip, #0
-#ifdef CONFIG_SMP
-	mcr	p15, 0, ip, c7, c1, 6		@ flush BTAC/BTB Inner Shareable
-#else
-	mcr	p15, 0, ip, c7, c5, 6		@ flush BTAC/BTB
-#endif
+	ALT_SMP(mcr	p15, 0, ip, c7, c1, 6)	@ flush BTAC/BTB Inner Shareable
+	ALT_UP(mcr	p15, 0, ip, c7, c5, 6)	@ flush BTAC/BTB
 	dsb
 	mov	pc, lr
 ENDPROC(v7wbi_flush_user_tlb_range)
@@ -74,20 +70,14 @@ ENTRY(v7wbi_flush_kern_tlb_range)
 	mov	r0, r0, lsl #PAGE_SHIFT
 	mov	r1, r1, lsl #PAGE_SHIFT
 1:
-#ifdef CONFIG_SMP
-	mcr	p15, 0, r0, c8, c3, 1		@ TLB invalidate U MVA (shareable)
-#else
-	mcr	p15, 0, r0, c8, c7, 1		@ TLB invalidate U MVA
-#endif
+	ALT_SMP(mcr	p15, 0, r0, c8, c3, 1)	@ TLB invalidate U MVA (shareable)
+	ALT_UP(mcr	p15, 0, r0, c8, c7, 1)	@ TLB invalidate U MVA
 	add	r0, r0, #PAGE_SZ
 	cmp	r0, r1
 	blo	1b
 	mov	r2, #0
-#ifdef CONFIG_SMP
-	mcr	p15, 0, r2, c7, c1, 6		@ flush BTAC/BTB Inner Shareable
-#else
-	mcr	p15, 0, r2, c7, c5, 6		@ flush BTAC/BTB
-#endif
+	ALT_SMP(mcr	p15, 0, r2, c7, c1, 6)	@ flush BTAC/BTB Inner Shareable
+	ALT_UP(mcr	p15, 0, r2, c7, c5, 6)	@ flush BTAC/BTB
 	dsb
 	isb
 	mov	pc, lr
@@ -99,5 +89,6 @@ ENDPROC(v7wbi_flush_kern_tlb_range)
 ENTRY(v7wbi_tlb_fns)
 	.long	v7wbi_flush_user_tlb_range
 	.long	v7wbi_flush_kern_tlb_range
-	.long	v7wbi_tlb_flags
+	ALT_SMP(.long	v7wbi_tlb_flags_smp)
+	ALT_UP(.long	v7wbi_tlb_flags_up)
 	.size	v7wbi_tlb_fns, . - v7wbi_tlb_fns
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 6785db4179b..64e3a64520e 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -92,6 +92,18 @@ config MXC_DEBUG_BOARD
 	  data/address de-multiplexing and decode, signal level shift,
 	  interrupt control and various board functions.
 
+config HAVE_EPIT
+	bool
+
+config MXC_USE_EPIT
+	bool "Use EPIT instead of GPT"
+	depends on HAVE_EPIT
+	help
+	  Use EPIT as the system timer on systems that have it. Normally you
+	  don't have a reason to do so as the EPIT has the same features and
+	  uses the same clocks as the GPT. Anyway, on some systems the GPT
+	  may be in use for other purposes.
+
 config MXC_ULPI
 	bool
 
@@ -110,4 +122,8 @@ config ARCH_MXC_AUDMUX_V1
 config ARCH_MXC_AUDMUX_V2
 	bool
 
+config IRAM_ALLOC
+	bool
+	select GENERIC_ALLOCATOR
+
 endif
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index 78d405ed861..06875b4dd70 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -10,9 +10,11 @@ obj-$(CONFIG_MXC_TZIC) += tzic.o
 
 obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o
 obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
+obj-$(CONFIG_IRAM_ALLOC) += iram_alloc.o
 obj-$(CONFIG_MXC_PWM)  += pwm.o
 obj-$(CONFIG_USB_EHCI_MXC) += ehci.o
 obj-$(CONFIG_MXC_ULPI) += ulpi.o
+obj-$(CONFIG_MXC_USE_EPIT) += epit.o
 obj-$(CONFIG_ARCH_MXC_AUDMUX_V1) += audmux-v1.o
 obj-$(CONFIG_ARCH_MXC_AUDMUX_V2) += audmux-v2.o
 obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
diff --git a/arch/arm/plat-mxc/audmux-v2.c b/arch/arm/plat-mxc/audmux-v2.c
index f9e7cdbd000..62920490c0d 100644
--- a/arch/arm/plat-mxc/audmux-v2.c
+++ b/arch/arm/plat-mxc/audmux-v2.c
@@ -186,7 +186,13 @@ EXPORT_SYMBOL_GPL(mxc_audmux_v2_configure_port);
 static int mxc_audmux_v2_init(void)
 {
 	int ret;
-
+#if defined(CONFIG_ARCH_MX5)
+	if (cpu_is_mx51()) {
+		audmux_base = MX51_IO_ADDRESS(MX51_AUDMUX_BASE_ADDR);
+		ret = 0;
+		return ret;
+	}
+#endif
 #if defined(CONFIG_ARCH_MX3)
 	if (cpu_is_mx31())
 		audmux_base = MX31_IO_ADDRESS(MX31_AUDMUX_BASE_ADDR);
diff --git a/arch/arm/plat-mxc/devices/Kconfig b/arch/arm/plat-mxc/devices/Kconfig
index 9ab784b776f..404799487f1 100644
--- a/arch/arm/plat-mxc/devices/Kconfig
+++ b/arch/arm/plat-mxc/devices/Kconfig
@@ -1,3 +1,10 @@
+config IMX_HAVE_PLATFORM_ESDHC
+	bool
+
+config IMX_HAVE_PLATFORM_FEC
+	bool
+	default y if ARCH_MX25 || SOC_IMX27 || ARCH_MX35 || ARCH_MX51
+
 config IMX_HAVE_PLATFORM_FLEXCAN
 	select HAVE_CAN_FLEXCAN
 	bool
@@ -5,6 +12,9 @@ config IMX_HAVE_PLATFORM_FLEXCAN
 config IMX_HAVE_PLATFORM_IMX_I2C
 	bool
 
+config IMX_HAVE_PLATFORM_IMX_SSI
+	bool
+
 config IMX_HAVE_PLATFORM_IMX_UART
 	bool
 
diff --git a/arch/arm/plat-mxc/devices/Makefile b/arch/arm/plat-mxc/devices/Makefile
index 347da5161f7..0a3c1f08941 100644
--- a/arch/arm/plat-mxc/devices/Makefile
+++ b/arch/arm/plat-mxc/devices/Makefile
@@ -1,8 +1,9 @@
-ifdef CONFIG_CAN_FLEXCAN
-# the ifdef can be removed once the flexcan driver has been merged
-obj-$(CONFIG_IMX_HAVE_PLATFORM_FLEXCAN) +=  platform-flexcan.o
-endif
+obj-$(CONFIG_IMX_HAVE_PLATFORM_ESDHC) += platform-esdhc.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_FEC) += platform-fec.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o
+obj-y += platform-imx-dma.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_I2C) += platform-imx-i2c.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_SSI) += platform-imx-ssi.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UART) += platform-imx-uart.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_NAND) += platform-mxc_nand.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) +=  platform-spi_imx.o
diff --git a/arch/arm/plat-mxc/devices/platform-esdhc.c b/arch/arm/plat-mxc/devices/platform-esdhc.c
new file mode 100644
index 00000000000..2605bfa0dfb
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-esdhc.c
@@ -0,0 +1,71 @@
+/*
+ * Copyright (C) 2010 Pengutronix, Wolfram Sang <w.sang@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+#include <mach/esdhc.h>
+
+#define imx_esdhc_imx_data_entry_single(soc, _id, hwid) \
+	{								\
+		.id = _id,						\
+		.iobase = soc ## _ESDHC ## hwid ## _BASE_ADDR,	\
+		.irq = soc ## _INT_ESDHC ## hwid,			\
+	}
+
+#define imx_esdhc_imx_data_entry(soc, id, hwid)	\
+	[id] = imx_esdhc_imx_data_entry_single(soc, id, hwid)
+
+#ifdef CONFIG_ARCH_MX25
+const struct imx_esdhc_imx_data imx25_esdhc_data[] __initconst = {
+#define imx25_esdhc_data_entry(_id, _hwid)				\
+	imx_esdhc_imx_data_entry(MX25, _id, _hwid)
+	imx25_esdhc_data_entry(0, 1),
+	imx25_esdhc_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_ARCH_MX25 */
+
+#ifdef CONFIG_ARCH_MX35
+const struct imx_esdhc_imx_data imx35_esdhc_data[] __initconst = {
+#define imx35_esdhc_data_entry(_id, _hwid)                           \
+	imx_esdhc_imx_data_entry(MX35, _id, _hwid)
+	imx35_esdhc_data_entry(0, 1),
+	imx35_esdhc_data_entry(1, 2),
+	imx35_esdhc_data_entry(2, 3),
+};
+#endif /* ifdef CONFIG_ARCH_MX35 */
+
+#ifdef CONFIG_ARCH_MX51
+const struct imx_esdhc_imx_data imx51_esdhc_data[] __initconst = {
+#define imx51_esdhc_data_entry(_id, _hwid)				\
+	imx_esdhc_imx_data_entry(MX51, _id, _hwid)
+	imx51_esdhc_data_entry(0, 1),
+	imx51_esdhc_data_entry(1, 2),
+	imx51_esdhc_data_entry(2, 3),
+	imx51_esdhc_data_entry(3, 4),
+};
+#endif /* ifdef CONFIG_ARCH_MX51 */
+
+struct platform_device *__init imx_add_esdhc(
+		const struct imx_esdhc_imx_data *data,
+		const struct esdhc_platform_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + SZ_16K - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return imx_add_platform_device("sdhci-esdhc-imx", data->id, res,
+			ARRAY_SIZE(res), pdata, sizeof(*pdata));
+}
diff --git a/arch/arm/plat-mxc/devices/platform-fec.c b/arch/arm/plat-mxc/devices/platform-fec.c
new file mode 100644
index 00000000000..11d087f4e21
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-fec.c
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <asm/sizes.h>
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx_fec_data_entry_single(soc)					\
+	{								\
+		.iobase = soc ## _FEC_BASE_ADDR,			\
+		.irq = soc ## _INT_FEC,					\
+	}
+
+#ifdef CONFIG_ARCH_MX25
+const struct imx_fec_data imx25_fec_data __initconst =
+	imx_fec_data_entry_single(MX25);
+#endif /* ifdef CONFIG_ARCH_MX25 */
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_fec_data imx27_fec_data __initconst =
+	imx_fec_data_entry_single(MX27);
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+#ifdef CONFIG_ARCH_MX35
+const struct imx_fec_data imx35_fec_data __initconst =
+	imx_fec_data_entry_single(MX35);
+#endif
+
+#ifdef CONFIG_ARCH_MX51
+const struct imx_fec_data imx51_fec_data __initconst =
+	imx_fec_data_entry_single(MX51);
+#endif
+
+struct platform_device *__init imx_add_fec(
+		const struct imx_fec_data *data,
+		const struct fec_platform_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + SZ_4K,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return imx_add_platform_device("fec", 0 /* -1? */,
+			res, ARRAY_SIZE(res),
+			pdata, sizeof(*pdata));
+}
diff --git a/arch/arm/plat-mxc/devices/platform-imx-dma.c b/arch/arm/plat-mxc/devices/platform-imx-dma.c
new file mode 100644
index 00000000000..02d98901805
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-imx-dma.c
@@ -0,0 +1,129 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <linux/compiler.h>
+#include <linux/err.h>
+#include <linux/init.h>
+
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+#ifdef SDMA_IS_MERGED
+#include <mach/sdma.h>
+#else
+struct sdma_platform_data {
+	int sdma_version;
+	char *cpu_name;
+	int to_version;
+};
+#endif
+
+struct imx_imx_sdma_data {
+	resource_size_t iobase;
+	resource_size_t irq;
+	struct sdma_platform_data pdata;
+};
+
+#define imx_imx_sdma_data_entry_single(soc, _sdma_version, _cpu_name, _to_version)\
+	{								\
+		.iobase = soc ## _SDMA ## _BASE_ADDR,			\
+		.irq = soc ## _INT_SDMA,				\
+		.pdata = {						\
+			.sdma_version = _sdma_version,			\
+			.cpu_name = _cpu_name,				\
+			.to_version = _to_version,			\
+		},							\
+	}
+
+#ifdef CONFIG_ARCH_MX25
+const struct imx_imx_sdma_data imx25_imx_sdma_data __initconst =
+	imx_imx_sdma_data_entry_single(MX25, 1, "imx25", 0);
+#endif /* ifdef CONFIG_ARCH_MX25 */
+
+#ifdef CONFIG_ARCH_MX31
+struct imx_imx_sdma_data imx31_imx_sdma_data __initdata =
+	imx_imx_sdma_data_entry_single(MX31, 1, "imx31", 0);
+#endif /* ifdef CONFIG_ARCH_MX31 */
+
+#ifdef CONFIG_ARCH_MX35
+struct imx_imx_sdma_data imx35_imx_sdma_data __initdata =
+	imx_imx_sdma_data_entry_single(MX35, 2, "imx35", 0);
+#endif /* ifdef CONFIG_ARCH_MX35 */
+
+#ifdef CONFIG_ARCH_MX51
+const struct imx_imx_sdma_data imx51_imx_sdma_data __initconst =
+	imx_imx_sdma_data_entry_single(MX51, 2, "imx51", 0);
+#endif /* ifdef CONFIG_ARCH_MX51 */
+
+static struct platform_device __init __maybe_unused *imx_add_imx_sdma(
+		const struct imx_imx_sdma_data *data)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + SZ_4K - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return imx_add_platform_device("imx-sdma", -1,
+			res, ARRAY_SIZE(res),
+			&data->pdata, sizeof(data->pdata));
+}
+
+static struct platform_device __init __maybe_unused *imx_add_imx_dma(void)
+{
+	return imx_add_platform_device("imx-dma", -1, NULL, 0, NULL, 0);
+}
+
+static int __init imxXX_add_imx_dma(void)
+{
+	struct platform_device *ret;
+
+#if defined(CONFIG_SOC_IMX21) || defined(CONFIG_SOC_IMX27)
+	if (cpu_is_mx21() || cpu_is_mx27())
+		ret = imx_add_imx_dma();
+	else
+#endif
+
+#if defined(CONFIG_ARCH_MX25)
+	if (cpu_is_mx25())
+		ret = imx_add_imx_sdma(&imx25_imx_sdma_data);
+	else
+#endif
+
+#if defined(CONFIG_ARCH_MX31)
+	if (cpu_is_mx31()) {
+		imx31_imx_sdma_data.pdata.to_version = mx31_revision() >> 4;
+		ret = imx_add_imx_sdma(&imx31_imx_sdma_data);
+	} else
+#endif
+
+#if defined(CONFIG_ARCH_MX35)
+	if (cpu_is_mx35()) {
+		imx35_imx_sdma_data.pdata.to_version = mx35_revision() >> 4;
+		ret = imx_add_imx_sdma(&imx35_imx_sdma_data);
+	} else
+#endif
+
+#if defined(CONFIG_ARCH_MX51)
+	if (cpu_is_mx51())
+		ret = imx_add_imx_sdma(&imx51_imx_sdma_data);
+	else
+#endif
+		ret = ERR_PTR(-ENODEV);
+
+	if (IS_ERR(ret))
+		return PTR_ERR(ret);
+
+	return 0;
+}
+arch_initcall(imxXX_add_imx_dma);
diff --git a/arch/arm/plat-mxc/devices/platform-imx-i2c.c b/arch/arm/plat-mxc/devices/platform-imx-i2c.c
index d0af9f7d8ae..679588453aa 100644
--- a/arch/arm/plat-mxc/devices/platform-imx-i2c.c
+++ b/arch/arm/plat-mxc/devices/platform-imx-i2c.c
@@ -6,24 +6,95 @@
  * the terms of the GNU General Public License version 2 as published by the
  * Free Software Foundation.
  */
+#include <mach/hardware.h>
 #include <mach/devices-common.h>
 
-struct platform_device *__init imx_add_imx_i2c(int id,
-		resource_size_t iobase, resource_size_t iosize, int irq,
+#define imx_imx_i2c_data_entry_single(soc, _id, _hwid, _size)		\
+	{								\
+		.id = _id,						\
+		.iobase = soc ## _I2C ## _hwid ## _BASE_ADDR,		\
+		.iosize = _size,					\
+		.irq = soc ## _INT_I2C ## _hwid,			\
+	}
+
+#define imx_imx_i2c_data_entry(soc, _id, _hwid, _size)			\
+	[_id] = imx_imx_i2c_data_entry_single(soc, _id, _hwid, _size)
+
+#ifdef CONFIG_SOC_IMX1
+const struct imx_imx_i2c_data imx1_imx_i2c_data __initconst =
+	imx_imx_i2c_data_entry_single(MX1, 0, , SZ_4K);
+#endif /* ifdef CONFIG_SOC_IMX1 */
+
+#ifdef CONFIG_SOC_IMX21
+const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst =
+	imx_imx_i2c_data_entry_single(MX21, 0, , SZ_4K);
+#endif /* ifdef CONFIG_SOC_IMX21 */
+
+#ifdef CONFIG_ARCH_MX25
+const struct imx_imx_i2c_data imx25_imx_i2c_data[] __initconst = {
+#define imx25_imx_i2c_data_entry(_id, _hwid)				\
+	imx_imx_i2c_data_entry(MX25, _id, _hwid, SZ_16K)
+	imx25_imx_i2c_data_entry(0, 1),
+	imx25_imx_i2c_data_entry(1, 2),
+	imx25_imx_i2c_data_entry(2, 3),
+};
+#endif /* ifdef CONFIG_ARCH_MX25 */
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst = {
+#define imx27_imx_i2c_data_entry(_id, _hwid)				\
+	imx_imx_i2c_data_entry(MX27, _id, _hwid, SZ_4K)
+	imx27_imx_i2c_data_entry(0, 1),
+	imx27_imx_i2c_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+#ifdef CONFIG_ARCH_MX31
+const struct imx_imx_i2c_data imx31_imx_i2c_data[] __initconst = {
+#define imx31_imx_i2c_data_entry(_id, _hwid)				\
+	imx_imx_i2c_data_entry(MX31, _id, _hwid, SZ_4K)
+	imx31_imx_i2c_data_entry(0, 1),
+	imx31_imx_i2c_data_entry(1, 2),
+	imx31_imx_i2c_data_entry(2, 3),
+};
+#endif /* ifdef CONFIG_ARCH_MX31 */
+
+#ifdef CONFIG_ARCH_MX35
+const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst = {
+#define imx35_imx_i2c_data_entry(_id, _hwid)				\
+	imx_imx_i2c_data_entry(MX35, _id, _hwid, SZ_4K)
+	imx35_imx_i2c_data_entry(0, 1),
+	imx35_imx_i2c_data_entry(1, 2),
+	imx35_imx_i2c_data_entry(2, 3),
+};
+#endif /* ifdef CONFIG_ARCH_MX35 */
+
+#ifdef CONFIG_ARCH_MX51
+const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst = {
+#define imx51_imx_i2c_data_entry(_id, _hwid)				\
+	imx_imx_i2c_data_entry(MX51, _id, _hwid, SZ_4K)
+	imx51_imx_i2c_data_entry(0, 1),
+	imx51_imx_i2c_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_ARCH_MX51 */
+
+struct platform_device *__init imx_add_imx_i2c(
+		const struct imx_imx_i2c_data *data,
 		const struct imxi2c_platform_data *pdata)
 {
 	struct resource res[] = {
 		{
-			.start = iobase,
-			.end = iobase + iosize - 1,
+			.start = data->iobase,
+			.end = data->iobase + data->iosize - 1,
 			.flags = IORESOURCE_MEM,
 		}, {
-			.start = irq,
-			.end = irq,
+			.start = data->irq,
+			.end = data->irq,
 			.flags = IORESOURCE_IRQ,
 		},
 	};
 
-	return imx_add_platform_device("imx-i2c", id, res, ARRAY_SIZE(res),
+	return imx_add_platform_device("imx-i2c", data->id,
+			res, ARRAY_SIZE(res),
 			pdata, sizeof(*pdata));
 }
diff --git a/arch/arm/plat-mxc/devices/platform-imx-ssi.c b/arch/arm/plat-mxc/devices/platform-imx-ssi.c
new file mode 100644
index 00000000000..38a7a0b8f2f
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-imx-ssi.c
@@ -0,0 +1,107 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx_imx_ssi_data_entry(soc, _id, _hwid, _size)			\
+	[_id] = {							\
+		.id = _id,						\
+		.iobase = soc ## _SSI ## _hwid ## _BASE_ADDR,		\
+		.iosize = _size,					\
+		.irq = soc ## _INT_SSI ## _hwid,			\
+		.dmatx0 = soc ## _DMA_REQ_SSI ## _hwid ## _TX0,		\
+		.dmarx0 = soc ## _DMA_REQ_SSI ## _hwid ## _RX0,		\
+		.dmatx1 = soc ## _DMA_REQ_SSI ## _hwid ## _TX1,		\
+		.dmarx1 = soc ## _DMA_REQ_SSI ## _hwid ## _RX1,		\
+	}
+
+#ifdef CONFIG_SOC_IMX21
+const struct imx_imx_ssi_data imx21_imx_ssi_data[] __initconst = {
+#define imx21_imx_ssi_data_entry(_id, _hwid)				\
+	imx_imx_ssi_data_entry(MX21, _id, _hwid, SZ_4K)
+	imx21_imx_ssi_data_entry(0, 1),
+	imx21_imx_ssi_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_SOC_IMX21 */
+
+#ifdef CONFIG_ARCH_MX25
+const struct imx_imx_ssi_data imx25_imx_ssi_data[] __initconst = {
+#define imx25_imx_ssi_data_entry(_id, _hwid)				\
+	imx_imx_ssi_data_entry(MX25, _id, _hwid, SZ_4K)
+	imx25_imx_ssi_data_entry(0, 1),
+	imx25_imx_ssi_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_ARCH_MX25 */
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_imx_ssi_data imx27_imx_ssi_data[] __initconst = {
+#define imx27_imx_ssi_data_entry(_id, _hwid)				\
+	imx_imx_ssi_data_entry(MX27, _id, _hwid, SZ_4K)
+	imx27_imx_ssi_data_entry(0, 1),
+	imx27_imx_ssi_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+#ifdef CONFIG_ARCH_MX31
+const struct imx_imx_ssi_data imx31_imx_ssi_data[] __initconst = {
+#define imx31_imx_ssi_data_entry(_id, _hwid)				\
+	imx_imx_ssi_data_entry(MX31, _id, _hwid, SZ_4K)
+	imx31_imx_ssi_data_entry(0, 1),
+	imx31_imx_ssi_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_ARCH_MX31 */
+
+#ifdef CONFIG_ARCH_MX35
+const struct imx_imx_ssi_data imx35_imx_ssi_data[] __initconst = {
+#define imx35_imx_ssi_data_entry(_id, _hwid)				\
+	imx_imx_ssi_data_entry(MX35, _id, _hwid, SZ_4K)
+	imx35_imx_ssi_data_entry(0, 1),
+	imx35_imx_ssi_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_ARCH_MX35 */
+
+#ifdef CONFIG_ARCH_MX51
+const struct imx_imx_ssi_data imx51_imx_ssi_data[] __initconst = {
+#define imx51_imx_ssi_data_entry(_id, _hwid)				\
+	imx_imx_ssi_data_entry(MX51, _id, _hwid, SZ_4K)
+	imx51_imx_ssi_data_entry(0, 1),
+	imx51_imx_ssi_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_ARCH_MX51 */
+
+struct platform_device *__init imx_add_imx_ssi(
+		const struct imx_imx_ssi_data *data,
+		const struct imx_ssi_platform_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + data->iosize - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		},
+#define DMARES(_name) {							\
+	.name = #_name,							\
+	.start = data->dma ## _name,					\
+	.end = data->dma ## _name,					\
+	.flags = IORESOURCE_DMA,					\
+}
+		DMARES(tx0),
+		DMARES(rx0),
+		DMARES(tx1),
+		DMARES(rx1),
+	};
+
+	return imx_add_platform_device("imx-ssi", data->id,
+			res, ARRAY_SIZE(res),
+			pdata, sizeof(*pdata));
+}
diff --git a/arch/arm/plat-mxc/devices/platform-imx-uart.c b/arch/arm/plat-mxc/devices/platform-imx-uart.c
index fa3dff1433e..2039640adf2 100644
--- a/arch/arm/plat-mxc/devices/platform-imx-uart.c
+++ b/arch/arm/plat-mxc/devices/platform-imx-uart.c
@@ -6,55 +6,148 @@
  * the terms of the GNU General Public License version 2 as published by the
  * Free Software Foundation.
  */
+#include <mach/hardware.h>
 #include <mach/devices-common.h>
 
-struct platform_device *__init imx_add_imx_uart_3irq(int id,
-		resource_size_t iobase, resource_size_t iosize,
-		resource_size_t irqrx, resource_size_t irqtx,
-		resource_size_t irqrts,
+#define imx_imx_uart_3irq_data_entry(soc, _id, _hwid, _size)		\
+	[_id] = {							\
+		.id = _id,						\
+		.iobase = soc ## _UART ## _hwid ## _BASE_ADDR,		\
+		.iosize = _size,					\
+		.irqrx = soc ## _INT_UART ## _hwid ## RX,		\
+		.irqtx = soc ## _INT_UART ## _hwid ## TX,		\
+		.irqrts = soc ## _INT_UART ## _hwid ## RTS,		\
+	}
+
+#define imx_imx_uart_1irq_data_entry(soc, _id, _hwid, _size)		\
+	[_id] = {							\
+		.id = _id,						\
+		.iobase = soc ## _UART ## _hwid ## _BASE_ADDR,		\
+		.iosize = _size,					\
+		.irq = soc ## _INT_UART ## _hwid,			\
+	}
+
+#ifdef CONFIG_SOC_IMX1
+const struct imx_imx_uart_3irq_data imx1_imx_uart_data[] __initconst = {
+#define imx1_imx_uart_data_entry(_id, _hwid)				\
+	imx_imx_uart_3irq_data_entry(MX1, _id, _hwid, 0xd0)
+	imx1_imx_uart_data_entry(0, 1),
+	imx1_imx_uart_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_SOC_IMX1 */
+
+#ifdef CONFIG_SOC_IMX21
+const struct imx_imx_uart_1irq_data imx21_imx_uart_data[] __initconst = {
+#define imx21_imx_uart_data_entry(_id, _hwid)				\
+	imx_imx_uart_1irq_data_entry(MX21, _id, _hwid, SZ_4K)
+	imx21_imx_uart_data_entry(0, 1),
+	imx21_imx_uart_data_entry(1, 2),
+	imx21_imx_uart_data_entry(2, 3),
+	imx21_imx_uart_data_entry(3, 4),
+};
+#endif
+
+#ifdef CONFIG_ARCH_MX25
+const struct imx_imx_uart_1irq_data imx25_imx_uart_data[] __initconst = {
+#define imx25_imx_uart_data_entry(_id, _hwid)				\
+	imx_imx_uart_1irq_data_entry(MX25, _id, _hwid, SZ_16K)
+	imx25_imx_uart_data_entry(0, 1),
+	imx25_imx_uart_data_entry(1, 2),
+	imx25_imx_uart_data_entry(2, 3),
+	imx25_imx_uart_data_entry(3, 4),
+	imx25_imx_uart_data_entry(4, 5),
+};
+#endif /* ifdef CONFIG_ARCH_MX25 */
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_imx_uart_1irq_data imx27_imx_uart_data[] __initconst = {
+#define imx27_imx_uart_data_entry(_id, _hwid)				\
+	imx_imx_uart_1irq_data_entry(MX27, _id, _hwid, SZ_4K)
+	imx27_imx_uart_data_entry(0, 1),
+	imx27_imx_uart_data_entry(1, 2),
+	imx27_imx_uart_data_entry(2, 3),
+	imx27_imx_uart_data_entry(3, 4),
+	imx27_imx_uart_data_entry(4, 5),
+	imx27_imx_uart_data_entry(5, 6),
+};
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+#ifdef CONFIG_ARCH_MX31
+const struct imx_imx_uart_1irq_data imx31_imx_uart_data[] __initconst = {
+#define imx31_imx_uart_data_entry(_id, _hwid)				\
+	imx_imx_uart_1irq_data_entry(MX31, _id, _hwid, SZ_4K)
+	imx31_imx_uart_data_entry(0, 1),
+	imx31_imx_uart_data_entry(1, 2),
+	imx31_imx_uart_data_entry(2, 3),
+	imx31_imx_uart_data_entry(3, 4),
+	imx31_imx_uart_data_entry(4, 5),
+};
+#endif /* ifdef CONFIG_ARCH_MX31 */
+
+#ifdef CONFIG_ARCH_MX35
+const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst = {
+#define imx35_imx_uart_data_entry(_id, _hwid)				\
+	imx_imx_uart_1irq_data_entry(MX31, _id, _hwid, SZ_16K)
+	imx35_imx_uart_data_entry(0, 1),
+	imx35_imx_uart_data_entry(1, 2),
+	imx35_imx_uart_data_entry(2, 3),
+};
+#endif /* ifdef CONFIG_ARCH_MX35 */
+
+#ifdef CONFIG_ARCH_MX51
+const struct imx_imx_uart_1irq_data imx51_imx_uart_data[] __initconst = {
+#define imx51_imx_uart_data_entry(_id, _hwid)				\
+	imx_imx_uart_1irq_data_entry(MX51, _id, _hwid, SZ_4K)
+	imx51_imx_uart_data_entry(0, 1),
+	imx51_imx_uart_data_entry(1, 2),
+	imx51_imx_uart_data_entry(2, 3),
+};
+#endif /* ifdef CONFIG_ARCH_MX51 */
+
+struct platform_device *__init imx_add_imx_uart_3irq(
+		const struct imx_imx_uart_3irq_data *data,
 		const struct imxuart_platform_data *pdata)
 {
 	struct resource res[] = {
 		{
-			.start = iobase,
-			.end = iobase + iosize - 1,
+			.start = data->iobase,
+			.end = data->iobase + data->iosize - 1,
 			.flags = IORESOURCE_MEM,
 		}, {
-			.start = irqrx,
-			.end = irqrx,
+			.start = data->irqrx,
+			.end = data->irqrx,
 			.flags = IORESOURCE_IRQ,
 		}, {
-			.start = irqtx,
-			.end = irqtx,
+			.start = data->irqtx,
+			.end = data->irqtx,
 			.flags = IORESOURCE_IRQ,
 		}, {
-			.start = irqrts,
-			.end = irqrx,
+			.start = data->irqrts,
+			.end = data->irqrx,
 			.flags = IORESOURCE_IRQ,
 		},
 	};
 
-	return imx_add_platform_device("imx-uart", id, res, ARRAY_SIZE(res),
-			pdata, sizeof(*pdata));
+	return imx_add_platform_device("imx-uart", data->id, res,
+			ARRAY_SIZE(res), pdata, sizeof(*pdata));
 }
 
-struct platform_device *__init imx_add_imx_uart_1irq(int id,
-		resource_size_t iobase, resource_size_t iosize,
-		resource_size_t irq,
+struct platform_device *__init imx_add_imx_uart_1irq(
+		const struct imx_imx_uart_1irq_data *data,
 		const struct imxuart_platform_data *pdata)
 {
 	struct resource res[] = {
 		{
-			.start = iobase,
-			.end = iobase + iosize - 1,
+			.start = data->iobase,
+			.end = data->iobase + data->iosize - 1,
 			.flags = IORESOURCE_MEM,
 		}, {
-			.start = irq,
-			.end = irq,
+			.start = data->irq,
+			.end = data->irq,
 			.flags = IORESOURCE_IRQ,
 		},
 	};
 
-	return imx_add_platform_device("imx-uart", id, res, ARRAY_SIZE(res),
+	return imx_add_platform_device("imx-uart", data->id, res, ARRAY_SIZE(res),
 			pdata, sizeof(*pdata));
 }
diff --git a/arch/arm/plat-mxc/devices/platform-mxc_nand.c b/arch/arm/plat-mxc/devices/platform-mxc_nand.c
index 1c286418d12..3fdcc32e3d6 100644
--- a/arch/arm/plat-mxc/devices/platform-mxc_nand.c
+++ b/arch/arm/plat-mxc/devices/platform-mxc_nand.c
@@ -7,38 +7,77 @@
  * Free Software Foundation.
  */
 #include <asm/sizes.h>
+#include <mach/hardware.h>
 #include <mach/devices-common.h>
 
-static struct platform_device *__init imx_add_mxc_nand(resource_size_t iobase,
-		int irq, const struct mxc_nand_platform_data *pdata,
-		resource_size_t iosize)
+#define imx_mxc_nand_data_entry_single(soc, _size)			\
+	{								\
+		.iobase = soc ## _NFC_BASE_ADDR,			\
+		.iosize = _size,					\
+		.irq = soc ## _INT_NFC					\
+	}
+
+#define imx_mxc_nandv3_data_entry_single(soc, _size)			\
+	{								\
+		.id = -1,						\
+		.iobase = soc ## _NFC_BASE_ADDR,			\
+		.iosize = _size,					\
+		.axibase = soc ## _NFC_AXI_BASE_ADDR,			\
+		.irq = soc ## _INT_NFC					\
+	}
+
+#ifdef CONFIG_SOC_IMX21
+const struct imx_mxc_nand_data imx21_mxc_nand_data __initconst =
+	imx_mxc_nand_data_entry_single(MX21, SZ_4K);
+#endif /* ifdef CONFIG_SOC_IMX21 */
+
+#ifdef CONFIG_ARCH_MX25
+const struct imx_mxc_nand_data imx25_mxc_nand_data __initconst =
+	imx_mxc_nand_data_entry_single(MX25, SZ_8K);
+#endif /* ifdef CONFIG_ARCH_MX25 */
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_mxc_nand_data imx27_mxc_nand_data __initconst =
+	imx_mxc_nand_data_entry_single(MX27, SZ_4K);
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+#ifdef CONFIG_ARCH_MX31
+const struct imx_mxc_nand_data imx31_mxc_nand_data __initconst =
+	imx_mxc_nand_data_entry_single(MX31, SZ_4K);
+#endif
+
+#ifdef CONFIG_ARCH_MX35
+const struct imx_mxc_nand_data imx35_mxc_nand_data __initconst =
+	imx_mxc_nand_data_entry_single(MX35, SZ_8K);
+#endif
+
+#ifdef CONFIG_ARCH_MX51
+const struct imx_mxc_nand_data imx51_mxc_nand_data __initconst =
+	imx_mxc_nandv3_data_entry_single(MX51, SZ_16K);
+#endif
+
+struct platform_device *__init imx_add_mxc_nand(
+		const struct imx_mxc_nand_data *data,
+		const struct mxc_nand_platform_data *pdata)
 {
-	static int id = 0;
-	
+	/* AXI has to come first, that's how the mxc_nand driver expect it */
 	struct resource res[] = {
 		{
-			.start = iobase,
-			.end = iobase + iosize - 1,
+			.start = data->axibase,
+			.end = data->axibase + SZ_16K - 1,
 			.flags = IORESOURCE_MEM,
 		}, {
-			.start = irq,
-			.end = irq,
+			.start = data->iobase,
+			.end = data->iobase + data->iosize - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
 			.flags = IORESOURCE_IRQ,
 		},
 	};
-
-	return imx_add_platform_device("mxc_nand", id++, res, ARRAY_SIZE(res),
+	return imx_add_platform_device("mxc_nand", data->id,
+			res + !data->axibase,
+			ARRAY_SIZE(res) - !data->axibase,
 			pdata, sizeof(*pdata));
 }
-
-struct platform_device *__init imx_add_mxc_nand_v1(resource_size_t iobase,
-		int irq, const struct mxc_nand_platform_data *pdata)
-{
-	return imx_add_mxc_nand(iobase, irq, pdata, SZ_4K);
-}
-
-struct platform_device *__init imx_add_mxc_nand_v21(resource_size_t iobase,
-		int irq, const struct mxc_nand_platform_data *pdata)
-{
-	return imx_add_mxc_nand(iobase, irq, pdata, SZ_8K);
-}
diff --git a/arch/arm/plat-mxc/devices/platform-spi_imx.c b/arch/arm/plat-mxc/devices/platform-spi_imx.c
index 2831a6d3eb4..e48340ec331 100644
--- a/arch/arm/plat-mxc/devices/platform-spi_imx.c
+++ b/arch/arm/plat-mxc/devices/platform-spi_imx.c
@@ -6,25 +6,96 @@
  * the terms of the GNU General Public License version 2 as published by the
  * Free Software Foundation.
  */
-#include <asm/sizes.h>
+#include <mach/hardware.h>
 #include <mach/devices-common.h>
 
-struct platform_device *__init imx_add_spi_imx(int id,
-		resource_size_t iobase, resource_size_t iosize, int irq,
+#define imx_spi_imx_data_entry_single(soc, type, _devid, _id, hwid, _size) \
+	{								\
+		.devid = _devid,					\
+		.id = _id,						\
+		.iobase = soc ## _ ## type ## hwid ## _BASE_ADDR,	\
+		.iosize = _size,					\
+		.irq = soc ## _INT_ ## type ## hwid,			\
+	}
+
+#define imx_spi_imx_data_entry(soc, type, devid, id, hwid, size)	\
+	[id] = imx_spi_imx_data_entry_single(soc, type, devid, id, hwid, size)
+
+#ifdef CONFIG_SOC_IMX21
+const struct imx_spi_imx_data imx21_cspi_data[] __initconst = {
+#define imx21_cspi_data_entry(_id, _hwid)                            \
+	imx_spi_imx_data_entry(MX21, CSPI, "imx21-cspi", _id, _hwid, SZ_4K)
+	imx21_cspi_data_entry(0, 1),
+	imx21_cspi_data_entry(1, 2),
+#endif
+
+#ifdef CONFIG_ARCH_MX25
+const struct imx_spi_imx_data imx25_cspi_data[] __initconst = {
+#define imx25_cspi_data_entry(_id, _hwid)				\
+	imx_spi_imx_data_entry(MX25, CSPI, "imx25-cspi", _id, _hwid, SZ_16K)
+	imx25_cspi_data_entry(0, 1),
+	imx25_cspi_data_entry(1, 2),
+	imx25_cspi_data_entry(2, 3),
+};
+#endif /* ifdef CONFIG_ARCH_MX25 */
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_spi_imx_data imx27_cspi_data[] __initconst = {
+#define imx27_cspi_data_entry(_id, _hwid)				\
+	imx_spi_imx_data_entry(MX27, CSPI, "imx27-cspi", _id, _hwid, SZ_4K)
+	imx27_cspi_data_entry(0, 1),
+	imx27_cspi_data_entry(1, 2),
+	imx27_cspi_data_entry(2, 3),
+};
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+#ifdef CONFIG_ARCH_MX31
+const struct imx_spi_imx_data imx31_cspi_data[] __initconst = {
+#define imx31_cspi_data_entry(_id, _hwid)				\
+	imx_spi_imx_data_entry(MX31, CSPI, "imx31-cspi", _id, _hwid, SZ_4K)
+	imx31_cspi_data_entry(0, 1),
+	imx31_cspi_data_entry(1, 2),
+	imx31_cspi_data_entry(2, 3),
+};
+#endif /* ifdef CONFIG_ARCH_MX31 */
+
+#ifdef CONFIG_ARCH_MX35
+const struct imx_spi_imx_data imx35_cspi_data[] __initconst = {
+#define imx35_cspi_data_entry(_id, _hwid)                           \
+	imx_spi_imx_data_entry(MX35, CSPI, "imx35-cspi", _id, _hwid, SZ_4K)
+	imx35_cspi_data_entry(0, 1),
+	imx35_cspi_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_ARCH_MX35 */
+
+#ifdef CONFIG_ARCH_MX51
+const struct imx_spi_imx_data imx51_cspi_data __initconst =
+	imx_spi_imx_data_entry_single(MX51, CSPI, "imx51-cspi", 0, , SZ_4K);
+
+const struct imx_spi_imx_data imx51_ecspi_data[] __initconst = {
+#define imx51_ecspi_data_entry(_id, _hwid)				\
+	imx_spi_imx_data_entry(MX51, ECSPI, "imx51-ecspi", _id, _hwid, SZ_4K)
+	imx51_ecspi_data_entry(0, 1),
+	imx51_ecspi_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_ARCH_MX51 */
+
+struct platform_device *__init imx_add_spi_imx(
+		const struct imx_spi_imx_data *data,
 		const struct spi_imx_master *pdata)
 {
 	struct resource res[] = {
 		{
-			.start = iobase,
-			.end = iobase + iosize - 1,
+			.start = data->iobase,
+			.end = data->iobase + data->iosize - 1,
 			.flags = IORESOURCE_MEM,
 		}, {
-			.start = irq,
-			.end = irq,
+			.start = data->irq,
+			.end = data->irq,
 			.flags = IORESOURCE_IRQ,
 		},
 	};
 
-	return imx_add_platform_device("spi_imx", id, res, ARRAY_SIZE(res),
-			pdata, sizeof(*pdata));
+	return imx_add_platform_device(data->devid, data->id,
+			res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
 }
diff --git a/arch/arm/plat-mxc/ehci.c b/arch/arm/plat-mxc/ehci.c
index 35a064ff02b..9915607683d 100644
--- a/arch/arm/plat-mxc/ehci.c
+++ b/arch/arm/plat-mxc/ehci.c
@@ -249,8 +249,8 @@ int mxc_initialize_usb_hw(int port, unsigned int flags)
 #ifdef CONFIG_ARCH_MX51
 	if (cpu_is_mx51()) {
 		void __iomem *usb_base;
-		u32 usbotg_base;
-		u32 usbother_base;
+		void __iomem *usbotg_base;
+		void __iomem *usbother_base;
 		int ret = 0;
 
 		usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
diff --git a/arch/arm/plat-mxc/epit.c b/arch/arm/plat-mxc/epit.c
new file mode 100644
index 00000000000..ee9582f4972
--- /dev/null
+++ b/arch/arm/plat-mxc/epit.c
@@ -0,0 +1,242 @@
+/*
+ *  linux/arch/arm/plat-mxc/epit.c
+ *
+ *  Copyright (C) 2010 Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#define EPITCR		0x00
+#define EPITSR		0x04
+#define EPITLR		0x08
+#define EPITCMPR	0x0c
+#define EPITCNR		0x10
+
+#define EPITCR_EN			(1 << 0)
+#define EPITCR_ENMOD			(1 << 1)
+#define EPITCR_OCIEN			(1 << 2)
+#define EPITCR_RLD			(1 << 3)
+#define EPITCR_PRESC(x)			(((x) & 0xfff) << 4)
+#define EPITCR_SWR			(1 << 16)
+#define EPITCR_IOVW			(1 << 17)
+#define EPITCR_DBGEN			(1 << 18)
+#define EPITCR_WAITEN			(1 << 19)
+#define EPITCR_RES			(1 << 20)
+#define EPITCR_STOPEN			(1 << 21)
+#define EPITCR_OM_DISCON		(0 << 22)
+#define EPITCR_OM_TOGGLE		(1 << 22)
+#define EPITCR_OM_CLEAR			(2 << 22)
+#define EPITCR_OM_SET			(3 << 22)
+#define EPITCR_CLKSRC_OFF		(0 << 24)
+#define EPITCR_CLKSRC_PERIPHERAL	(1 << 24)
+#define EPITCR_CLKSRC_REF_HIGH		(1 << 24)
+#define EPITCR_CLKSRC_REF_LOW		(3 << 24)
+
+#define EPITSR_OCIF			(1 << 0)
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/clockchips.h>
+#include <linux/clk.h>
+
+#include <mach/hardware.h>
+#include <asm/mach/time.h>
+#include <mach/common.h>
+
+static struct clock_event_device clockevent_epit;
+static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
+
+static void __iomem *timer_base;
+
+static inline void epit_irq_disable(void)
+{
+	u32 val;
+
+	val = __raw_readl(timer_base + EPITCR);
+	val &= ~EPITCR_OCIEN;
+	__raw_writel(val, timer_base + EPITCR);
+}
+
+static inline void epit_irq_enable(void)
+{
+	u32 val;
+
+	val = __raw_readl(timer_base + EPITCR);
+	val |= EPITCR_OCIEN;
+	__raw_writel(val, timer_base + EPITCR);
+}
+
+static void epit_irq_acknowledge(void)
+{
+	__raw_writel(EPITSR_OCIF, timer_base + EPITSR);
+}
+
+static cycle_t epit_read(struct clocksource *cs)
+{
+	return 0 - __raw_readl(timer_base + EPITCNR);
+}
+
+static struct clocksource clocksource_epit = {
+	.name		= "epit",
+	.rating		= 200,
+	.read		= epit_read,
+	.mask		= CLOCKSOURCE_MASK(32),
+	.shift		= 20,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int __init epit_clocksource_init(struct clk *timer_clk)
+{
+	unsigned int c = clk_get_rate(timer_clk);
+
+	clocksource_epit.mult = clocksource_hz2mult(c,
+					clocksource_epit.shift);
+	clocksource_register(&clocksource_epit);
+
+	return 0;
+}
+
+/* clock event */
+
+static int epit_set_next_event(unsigned long evt,
+			      struct clock_event_device *unused)
+{
+	unsigned long tcmp;
+
+	tcmp = __raw_readl(timer_base + EPITCNR);
+
+	__raw_writel(tcmp - evt, timer_base + EPITCMPR);
+
+	return 0;
+}
+
+static void epit_set_mode(enum clock_event_mode mode,
+				struct clock_event_device *evt)
+{
+	unsigned long flags;
+
+	/*
+	 * The timer interrupt generation is disabled at least
+	 * for enough time to call epit_set_next_event()
+	 */
+	local_irq_save(flags);
+
+	/* Disable interrupt in GPT module */
+	epit_irq_disable();
+
+	if (mode != clockevent_mode) {
+		/* Set event time into far-far future */
+
+		/* Clear pending interrupt */
+		epit_irq_acknowledge();
+	}
+
+	/* Remember timer mode */
+	clockevent_mode = mode;
+	local_irq_restore(flags);
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		printk(KERN_ERR "epit_set_mode: Periodic mode is not "
+				"supported for i.MX EPIT\n");
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+	/*
+	 * Do not put overhead of interrupt enable/disable into
+	 * epit_set_next_event(), the core has about 4 minutes
+	 * to call epit_set_next_event() or shutdown clock after
+	 * mode switching
+	 */
+		local_irq_save(flags);
+		epit_irq_enable();
+		local_irq_restore(flags);
+		break;
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_RESUME:
+		/* Left event sources disabled, no more interrupts appear */
+		break;
+	}
+}
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t epit_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = &clockevent_epit;
+
+	epit_irq_acknowledge();
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction epit_timer_irq = {
+	.name		= "i.MX EPIT Timer Tick",
+	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.handler	= epit_timer_interrupt,
+};
+
+static struct clock_event_device clockevent_epit = {
+	.name		= "epit",
+	.features	= CLOCK_EVT_FEAT_ONESHOT,
+	.shift		= 32,
+	.set_mode	= epit_set_mode,
+	.set_next_event	= epit_set_next_event,
+	.rating		= 200,
+};
+
+static int __init epit_clockevent_init(struct clk *timer_clk)
+{
+	unsigned int c = clk_get_rate(timer_clk);
+
+	clockevent_epit.mult = div_sc(c, NSEC_PER_SEC,
+					clockevent_epit.shift);
+	clockevent_epit.max_delta_ns =
+			clockevent_delta2ns(0xfffffffe, &clockevent_epit);
+	clockevent_epit.min_delta_ns =
+			clockevent_delta2ns(0x800, &clockevent_epit);
+
+	clockevent_epit.cpumask = cpumask_of(0);
+
+	clockevents_register_device(&clockevent_epit);
+
+	return 0;
+}
+
+void __init epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
+{
+	clk_enable(timer_clk);
+
+	timer_base = base;
+
+	/*
+	 * Initialise to a known state (all timers off, and timing reset)
+	 */
+	__raw_writel(0x0, timer_base + EPITCR);
+
+	__raw_writel(0xffffffff, timer_base + EPITLR);
+	__raw_writel(EPITCR_EN | EPITCR_CLKSRC_REF_HIGH | EPITCR_WAITEN,
+			timer_base + EPITCR);
+
+	/* init and register the timer to the framework */
+	epit_clocksource_init(timer_clk);
+	epit_clockevent_init(timer_clk);
+
+	/* Make irqs happen */
+	setup_irq(irq, &epit_timer_irq);
+}
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index 57ec4a896a5..9d38da077ed 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -235,7 +235,7 @@ static void mxc_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 	unsigned long flags;
 
 	spin_lock_irqsave(&port->lock, flags);
-	l = (__raw_readl(reg) & (~(1 << offset))) | (value << offset);
+	l = (__raw_readl(reg) & (~(1 << offset))) | (!!value << offset);
 	__raw_writel(l, reg);
 	spin_unlock_irqrestore(&port->lock, flags);
 }
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
new file mode 100644
index 00000000000..94b60dd4713
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX31ADS_H__
+#define __ASM_ARCH_MXC_BOARD_MX31ADS_H__
+
+#include <mach/hardware.h>
+
+/*
+ * These symbols are used by drivers/net/cs89x0.c.
+ * This is ugly as hell, but we have to provide them until
+ * someone fixed the driver.
+ */
+
+/* Base address of PBC controller */
+#define PBC_BASE_ADDRESS        MX31_CS4_BASE_ADDR_VIRT
+/* Offsets for the PBC Controller register */
+
+/* Ethernet Controller IO base address */
+#define PBC_CS8900A_IOBASE      0x020000
+
+#define MXC_EXP_IO_BASE		(MXC_BOARD_IRQ_START)
+
+#define EXPIO_INT_ENET_INT	(MXC_EXP_IO_BASE + 8)
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 2941472582d..7a1e1f89ff0 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -32,6 +32,7 @@ extern void mx31_init_irq(void);
 extern void mx35_init_irq(void);
 extern void mx51_init_irq(void);
 extern void mxc91231_init_irq(void);
+extern void epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq);
 extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
 extern int mx1_clocks_init(unsigned long fref);
 extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index 25606409aab..d56213fb901 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -62,11 +62,9 @@
 #define UART_PADDR	MXC91231_UART2_BASE_ADDR
 #define UART_VADDR	MXC91231_IO_ADDRESS(MXC91231_UART2_BASE_ADDR)
 #endif
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		ldreq	\rx, =UART_PADDR	@ physical
-		ldrne	\rx, =UART_VADDR	@ virtual
+		.macro	addruart, rp, rv
+		ldr	\rp, =UART_PADDR	@ physical
+		ldr	\rv, =UART_VADDR	@ virtual
 		.endm
 
 		.macro	senduart,rd,rx
diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h
index c5f68c58730..86d7575a564 100644
--- a/arch/arm/plat-mxc/include/mach/devices-common.h
+++ b/arch/arm/plat-mxc/include/mach/devices-common.h
@@ -14,47 +14,105 @@ struct platform_device *imx_add_platform_device(const char *name, int id,
 		const struct resource *res, unsigned int num_resources,
 		const void *data, size_t size_data);
 
-#if defined (CONFIG_CAN_FLEXCAN) || defined (CONFIG_CAN_FLEXCAN_MODULE)
+#include <linux/fec.h>
+struct imx_fec_data {
+	resource_size_t iobase;
+	resource_size_t irq;
+};
+struct platform_device *__init imx_add_fec(
+		const struct imx_fec_data *data,
+		const struct fec_platform_data *pdata);
+
 #include <linux/can/platform/flexcan.h>
 struct platform_device *__init imx_add_flexcan(int id,
 		resource_size_t iobase, resource_size_t iosize,
 		resource_size_t irq,
 		const struct flexcan_platform_data *pdata);
-#else
-/* the ifdef can be removed once the flexcan driver has been merged */
-struct flexcan_platform_data;
-static inline struct platform_device *__init imx_add_flexcan(int id,
-		resource_size_t iobase, resource_size_t iosize,
-		resource_size_t irq,
-		const struct flexcan_platform_data *pdata)
-{
-	return NULL;
-}
-#endif
 
 #include <mach/i2c.h>
-struct platform_device *__init imx_add_imx_i2c(int id,
-		resource_size_t iobase, resource_size_t iosize, int irq,
+struct imx_imx_i2c_data {
+	int id;
+	resource_size_t iobase;
+	resource_size_t iosize;
+	resource_size_t irq;
+};
+struct platform_device *__init imx_add_imx_i2c(
+		const struct imx_imx_i2c_data *data,
 		const struct imxi2c_platform_data *pdata);
 
+#include <mach/ssi.h>
+struct imx_imx_ssi_data {
+	int id;
+	resource_size_t iobase;
+	resource_size_t iosize;
+	resource_size_t irq;
+	resource_size_t dmatx0;
+	resource_size_t dmarx0;
+	resource_size_t dmatx1;
+	resource_size_t dmarx1;
+};
+struct platform_device *__init imx_add_imx_ssi(
+		const struct imx_imx_ssi_data *data,
+		const struct imx_ssi_platform_data *pdata);
+
 #include <mach/imx-uart.h>
-struct platform_device *__init imx_add_imx_uart_3irq(int id,
-		resource_size_t iobase, resource_size_t iosize,
-		resource_size_t irqrx, resource_size_t irqtx,
-		resource_size_t irqrts,
+struct imx_imx_uart_3irq_data {
+	int id;
+	resource_size_t iobase;
+	resource_size_t iosize;
+	resource_size_t irqrx;
+	resource_size_t irqtx;
+	resource_size_t irqrts;
+};
+struct platform_device *__init imx_add_imx_uart_3irq(
+		const struct imx_imx_uart_3irq_data *data,
 		const struct imxuart_platform_data *pdata);
-struct platform_device *__init imx_add_imx_uart_1irq(int id,
-		resource_size_t iobase, resource_size_t iosize,
-		resource_size_t irq,
+
+struct imx_imx_uart_1irq_data {
+	int id;
+	resource_size_t iobase;
+	resource_size_t iosize;
+	resource_size_t irq;
+};
+struct platform_device *__init imx_add_imx_uart_1irq(
+		const struct imx_imx_uart_1irq_data *data,
 		const struct imxuart_platform_data *pdata);
 
 #include <mach/mxc_nand.h>
-struct platform_device *__init imx_add_mxc_nand_v1(resource_size_t iobase,
-		int irq, const struct mxc_nand_platform_data *pdata);
-struct platform_device *__init imx_add_mxc_nand_v21(resource_size_t iobase,
-		int irq, const struct mxc_nand_platform_data *pdata);
+struct imx_mxc_nand_data {
+	/*
+	 * id is traditionally 0, but -1 is more appropriate.  We use -1 for new
+	 * machines but don't change existing devices as the nand device usually
+	 * appears in the kernel command line to pass its partitioning.
+	 */
+	int id;
+	resource_size_t iobase;
+	resource_size_t iosize;
+	resource_size_t axibase;
+	resource_size_t irq;
+};
+struct platform_device *__init imx_add_mxc_nand(
+		const struct imx_mxc_nand_data *data,
+		const struct mxc_nand_platform_data *pdata);
 
 #include <mach/spi.h>
-struct platform_device *__init imx_add_spi_imx(int id,
-		resource_size_t iobase, resource_size_t iosize, int irq,
+struct imx_spi_imx_data {
+	const char *devid;
+	int id;
+	resource_size_t iobase;
+	resource_size_t iosize;
+	int irq;
+};
+struct platform_device *__init imx_add_spi_imx(
+		const struct imx_spi_imx_data *data,
 		const struct spi_imx_master *pdata);
+
+#include <mach/esdhc.h>
+struct imx_esdhc_imx_data {
+	int id;
+	resource_size_t iobase;
+	resource_size_t irq;
+};
+struct platform_device *__init imx_add_esdhc(
+		const struct imx_esdhc_imx_data *data,
+		const struct esdhc_platform_data *pdata);
diff --git a/arch/arm/plat-mxc/include/mach/esdhc.h b/arch/arm/plat-mxc/include/mach/esdhc.h
new file mode 100644
index 00000000000..a48a9aaa56b
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/esdhc.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright 2010 Wolfram Sang <w.sang@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#ifndef __ASM_ARCH_IMX_ESDHC_H
+#define __ASM_ARCH_IMX_ESDHC_H
+
+struct esdhc_platform_data {
+	unsigned int wp_gpio;	/* write protect pin */
+};
+#endif /* __ASM_ARCH_IMX_ESDHC_H */
diff --git a/arch/arm/plat-mxc/include/mach/eukrea-baseboards.h b/arch/arm/plat-mxc/include/mach/eukrea-baseboards.h
index 656acb45d43..a21d3313f99 100644
--- a/arch/arm/plat-mxc/include/mach/eukrea-baseboards.h
+++ b/arch/arm/plat-mxc/include/mach/eukrea-baseboards.h
@@ -28,19 +28,22 @@
  * its own devices, it calls baseboard's init function.
  * TODO: Add your own baseboard init function and call it from
  * inside eukrea_cpuimx25_init() eukrea_cpuimx27_init()
- * eukrea_cpuimx35_init() or eukrea_cpuimx51_init().
+ * eukrea_cpuimx35_init() eukrea_cpuimx51_init()
+ * or eukrea_cpuimx51sd_init().
  *
  * This example here is for the development board. Refer
  * mach-mx25/eukrea_mbimxsd-baseboard.c for cpuimx25
  * mach-imx/eukrea_mbimx27-baseboard.c for cpuimx27
  * mach-mx3/eukrea_mbimxsd-baseboard.c for cpuimx35
  * mach-mx5/eukrea_mbimx51-baseboard.c for cpuimx51
+ * mach-mx5/eukrea_mbimxsd-baseboard.c for cpuimx51sd
  */
 
 extern void eukrea_mbimxsd25_baseboard_init(void);
 extern void eukrea_mbimx27_baseboard_init(void);
 extern void eukrea_mbimxsd35_baseboard_init(void);
 extern void eukrea_mbimx51_baseboard_init(void);
+extern void eukrea_mbimxsd51_baseboard_init(void);
 
 #endif
 
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx51.h b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
index 21bfa46785b..e46b1c2836d 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx51.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
@@ -45,6 +45,18 @@ typedef enum iomux_config {
 				PAD_CTL_PKE | PAD_CTL_HYS)
 #define MX51_GPIO_PAD_CTRL		(PAD_CTL_DSE_HIGH | PAD_CTL_PKE | \
 				PAD_CTL_SRE_FAST)
+#define MX51_ECSPI_PAD_CTRL	(PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_DSE_HIGH | \
+				PAD_CTL_SRE_FAST)
+#define MX51_SDHCI_PAD_CTRL	(PAD_CTL_DSE_HIGH | PAD_CTL_PUS_47K_UP | \
+				PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_SRE_FAST | \
+				PAD_CTL_DVS)
+
+#define MX51_PAD_CTRL_1	(PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \
+					PAD_CTL_PUE | PAD_CTL_PKE | PAD_CTL_HYS)
+#define MX51_PAD_CTRL_2	(PAD_CTL_HYS | PAD_CTL_PKE)
+#define MX51_PAD_CTRL_3	(PAD_CTL_PKE | PAD_CTL_PUS_100K_UP)
+#define MX51_PAD_CTRL_4	(PAD_CTL_DVS | PAD_CTL_HYS | PAD_CTL_PKE)
+#define MX51_PAD_CTRL_5	(PAD_CTL_DVS | PAD_CTL_DSE_HIGH)
 
 /*
  * The naming convention for the pad modes is MX51_PAD_<padname>__<padmode>
@@ -106,14 +118,20 @@ typedef enum iomux_config {
 #define MX51_PAD_EIM_EB0__EIM_EB0               IOMUX_PAD(0x460, 0x0cc, 0, 0x0,   0, NO_PAD_CTRL)
 #define MX51_PAD_EIM_EB1__EIM_EB1               IOMUX_PAD(0x464, 0x0d0, 0, 0x0,   0, NO_PAD_CTRL)
 #define MX51_PAD_EIM_EB2__GPIO_2_22             IOMUX_PAD(0x468, 0x0d4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_EB2__FEC_MDIO		IOMUX_PAD(0x468, 0x0d4, 3, 0x0,   0, MX51_PAD_CTRL_1 | PAD_CTL_PUS_22K_UP)
 #define MX51_PAD_EIM_EB3__GPIO_2_23             IOMUX_PAD(0x46c, 0x0d8, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_EB3__FEC_RDAT1		IOMUX_PAD(0x46c, 0x0d8, 3, 0x0,   0, MX51_PAD_CTRL_2)
 #define MX51_PAD_EIM_OE__GPIO_2_24              IOMUX_PAD(0x470, 0x0dc, 1, 0x0,   0, NO_PAD_CTRL)
 #define MX51_PAD_EIM_CS0__GPIO_2_25             IOMUX_PAD(0x474, 0x0e0, 1, 0x0,   0, NO_PAD_CTRL)
 #define MX51_PAD_EIM_CS1__GPIO_2_26             IOMUX_PAD(0x478, 0x0e4, 1, 0x0,   0, NO_PAD_CTRL)
 #define MX51_PAD_EIM_CS2__GPIO_2_27             IOMUX_PAD(0x47c, 0x0e8, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS2__FEC_RDAT2		IOMUX_PAD(0x47c, 0x0e8, 3, 0x0,   0, MX51_PAD_CTRL_2)
 #define MX51_PAD_EIM_CS3__GPIO_2_28             IOMUX_PAD(0x480, 0x0ec, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS3__FEC_RDAT3		IOMUX_PAD(0x480, 0x0ec, 3, 0x0,   0, MX51_PAD_CTRL_2)
 #define MX51_PAD_EIM_CS4__GPIO_2_29             IOMUX_PAD(0x484, 0x0f0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS4__FEC_RX_ER		IOMUX_PAD(0x484, 0x0f0, 3, 0x0,   0, MX51_PAD_CTRL_2)
 #define MX51_PAD_EIM_CS5__GPIO_2_30             IOMUX_PAD(0x488, 0x0f4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS5__FEC_CRS		IOMUX_PAD(0x488, 0x0f4, 3, 0x0,   0, MX51_PAD_CTRL_2)
 #define MX51_PAD_EIM_DTACK__GPIO_2_31           IOMUX_PAD(0x48c, 0x0f8, 1, 0x0,   0, NO_PAD_CTRL)
 #define MX51_PAD_EIM_LBA__GPIO_3_1              IOMUX_PAD(0x494, 0x0FC, 1, 0x0,   0, NO_PAD_CTRL)
 #define MX51_PAD_EIM_CRE__GPIO_3_2              IOMUX_PAD(0x4A0, 0x100, 1, 0x0,   0, NO_PAD_CTRL)
@@ -126,18 +144,32 @@ typedef enum iomux_config {
 #define MX51_PAD_NANDF_RB0__GPIO_3_8            IOMUX_PAD(0x4F8, 0x11C, 3, 0x0,   0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_RB1__GPIO_3_9            IOMUX_PAD(0x4FC, 0x120, 3, 0x0,   0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_RB2__GPIO_3_10           IOMUX_PAD(0x500, 0x124, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB2__ECSPI2_SCLK         IOMUX_PAD(0x500, 0x124, 2, 0x0,   0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_NANDF_RB2__FEC_COL		IOMUX_PAD(0x500, 0x124, 1, 0x0,   0, MX51_PAD_CTRL_2)
 #define MX51_PAD_NANDF_RB3__GPIO_3_11           IOMUX_PAD(0x504, 0x128, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB3__ECSPI2_MISO         IOMUX_PAD(0x504, 0x128, 2, 0x0,   0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_NANDF_RB3__FEC_RXCLK		IOMUX_PAD(0x504, 0x128, 1, 0x0,   0, MX51_PAD_CTRL_2)
+#define MX51_PAD_NANDF_RB6__FEC_RDAT0		IOMUX_PAD(0x5DC, 0x134, 1, 0x0,   0, MX51_PAD_CTRL_4)
+#define MX51_PAD_NANDF_RB7__FEC_TDAT0		IOMUX_PAD(0x5E0, 0x138, 1, 0x0,   0, MX51_PAD_CTRL_5)
 #define MX51_PAD_GPIO_NAND__GPIO_3_12           IOMUX_PAD(0x514, 0x12C, 3, 0x0,   0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_CS0__GPIO_3_16           IOMUX_PAD(0x518, 0x130, 3, 0x0,   0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_CS1__GPIO_3_17           IOMUX_PAD(0x51C, 0x134, 3, 0x0,   0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_CS2__GPIO_3_18           IOMUX_PAD(0x520, 0x138, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS2__FEC_TX_ER		IOMUX_PAD(0x520, 0x138, 2, 0x0,   0, MX51_PAD_CTRL_5)
 #define MX51_PAD_NANDF_CS3__GPIO_3_19           IOMUX_PAD(0x524, 0x13C, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS3__FEC_MDC		IOMUX_PAD(0x524, 0x13C, 2, 0x0,   0, MX51_PAD_CTRL_5)
 #define MX51_PAD_NANDF_CS4__GPIO_3_20           IOMUX_PAD(0x528, 0x140, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS4__FEC_TDAT1		IOMUX_PAD(0x528, 0x140, 2, 0x0,   0, MX51_PAD_CTRL_5)
 #define MX51_PAD_NANDF_CS5__GPIO_3_21           IOMUX_PAD(0x52C, 0x144, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS5__FEC_TDAT2		IOMUX_PAD(0x52C, 0x144, 2, 0x0,   0, MX51_PAD_CTRL_5)
 #define MX51_PAD_NANDF_CS6__GPIO_3_22           IOMUX_PAD(0x530, 0x148, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS6__FEC_TDAT3		IOMUX_PAD(0x530, 0x148, 2, 0x0,   0, MX51_PAD_CTRL_5)
 #define MX51_PAD_NANDF_CS7__GPIO_3_23           IOMUX_PAD(0x534, 0x14C, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS7__FEC_TX_EN		IOMUX_PAD(0x534, 0x14C, 1, 0x0,   0, MX51_PAD_CTRL_5)
 #define MX51_PAD_NANDF_RDY_INT__GPIO_3_24       IOMUX_PAD(0x538, 0x150, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK	IOMUX_PAD(0x538, 0x150, 1, 0x0,   0, MX51_PAD_CTRL_4)
 #define MX51_PAD_NANDF_D15__GPIO_3_25           IOMUX_PAD(0x53C, 0x154, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D15__ECSPI2_MOSI         IOMUX_PAD(0x53C, 0x154, 2, 0x0,   0, MX51_ECSPI_PAD_CTRL)
 #define MX51_PAD_NANDF_D14__GPIO_3_26           IOMUX_PAD(0x540, 0x158, 3, 0x0,   0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_D13__GPIO_3_27           IOMUX_PAD(0x544, 0x15C, 3, 0x0,   0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_D12__GPIO_3_28           IOMUX_PAD(0x548, 0x160, 3, 0x0,   0, NO_PAD_CTRL)
@@ -185,15 +217,25 @@ typedef enum iomux_config {
 #define MX51_PAD_I2C1_CLK__HSI2C_CLK		IOMUX_PAD(0x5E8, 0x1F8, 0, 0x0,   0, NO_PAD_CTRL)
 #define MX51_PAD_I2C1_DAT__GPIO_4_17            IOMUX_PAD(0x5EC, 0x1FC, 3, 0x0,   0, NO_PAD_CTRL)
 #define MX51_PAD_I2C1_DAT__HSI2C_DAT		IOMUX_PAD(0x5EC, 0x1FC, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_AUD3_BB_TXD__AUD3_BB_TXD       IOMUX_PAD(0x5F0, 0x200, IOMUX_CONFIG_SION, 0x0,   0, NO_PAD_CTRL)
 #define MX51_PAD_AUD3_BB_TXD__GPIO_4_18         IOMUX_PAD(0x5F0, 0x200, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_AUD3_BB_RXD__AUD3_BB_RXD       IOMUX_PAD(0x5F4, 0x204, IOMUX_CONFIG_SION, 0x0,   0, NO_PAD_CTRL)
 #define MX51_PAD_AUD3_BB_RXD__GPIO_4_19         IOMUX_PAD(0x5F4, 0x204, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_AUD3_BB_CK__AUD3_BB_CK         IOMUX_PAD(0x5F8, 0x208, IOMUX_CONFIG_SION, 0x0,   0, NO_PAD_CTRL)
 #define MX51_PAD_AUD3_BB_CK__GPIO_4_20          IOMUX_PAD(0x5F8, 0x208, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_AUD3_BB_FS__AUD3_BB_FS         IOMUX_PAD(0x5FC, 0x20C, IOMUX_CONFIG_SION, 0x0,   0, NO_PAD_CTRL)
 #define MX51_PAD_AUD3_BB_FS__GPIO_4_21          IOMUX_PAD(0x5FC, 0x20C, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI        IOMUX_PAD(0x600, 0x210, 0, 0x0,   0, MX51_ECSPI_PAD_CTRL)
 #define MX51_PAD_CSPI1_MOSI__GPIO_4_22          IOMUX_PAD(0x600, 0x210, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSPI1_MISO__ECSPI1_MISO        IOMUX_PAD(0x604, 0x214, 0, 0x0,   0, MX51_ECSPI_PAD_CTRL)
 #define MX51_PAD_CSPI1_MISO__GPIO_4_23          IOMUX_PAD(0x604, 0x214, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSPI1_SS0__ECSPI1_SS0          IOMUX_PAD(0x608, 0x218, 0, 0x0,   0, MX51_ECSPI_PAD_CTRL)
 #define MX51_PAD_CSPI1_SS0__GPIO_4_24           IOMUX_PAD(0x608, 0x218, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSPI1_SS1__ECSPI1_SS1          IOMUX_PAD(0x60C, 0x21C, 0, 0x0,   0, MX51_ECSPI_PAD_CTRL)
 #define MX51_PAD_CSPI1_SS1__GPIO_4_25           IOMUX_PAD(0x60C, 0x21C, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSPI1_RDY__ECSPI1_RDY          IOMUX_PAD(0x610, 0x220, 0, 0x0,   0, MX51_ECSPI_PAD_CTRL)
 #define MX51_PAD_CSPI1_RDY__GPIO_4_26           IOMUX_PAD(0x610, 0x220, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK        IOMUX_PAD(0x614, 0x224, 0, 0x0,   0, MX51_ECSPI_PAD_CTRL)
 #define MX51_PAD_CSPI1_SCLK__GPIO_4_27          IOMUX_PAD(0x614, 0x224, 3, 0x0,   0, NO_PAD_CTRL)
 #define MX51_PAD_UART1_RXD__UART1_RXD           IOMUX_PAD(0x618, 0x228, 0, 0x9e4, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST)
 #define MX51_PAD_UART1_TXD__UART1_TXD           IOMUX_PAD(0x61C, 0x22C, 0, 0x0,   0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST)
@@ -236,14 +278,14 @@ typedef enum iomux_config {
 #define MX51_PAD_USBH1_DATA6__USBH1_DATA6       IOMUX_PAD(0x6A0, 0x2A0, 0, 0x0,   0, MX51_USBH1_PAD_CTRL)
 #define MX51_PAD_USBH1_DATA7__USBH1_DATA7       IOMUX_PAD(0x6A4, 0x2A4, 0, 0x0,   0, MX51_USBH1_PAD_CTRL)
 #define MX51_PAD_DI1_PIN11__GPIO_3_0            IOMUX_PAD(0x6A8, 0x2A8, 4, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_PIN12__GPIO_3_1            IOMUX_PAD(0x6AC, 0x2AC, 4, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_PIN13__GPIO_3_2            IOMUX_PAD(0x6B0, 0x2B0, 4, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_D0_CS__GPIO_3_3            IOMUX_PAD(0x6B4, 0x2B4, 4, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_D1_CS__GPIO_3_4            IOMUX_PAD(0x6B8, 0x2B8, 4, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_DIN__GPIO_3_5       IOMUX_PAD(0x6BC, 0x2BC, 4, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_DIO__GPIO_3_6       IOMUX_PAD(0x6C0, 0x2C0, 4, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_CLK__GPIO_3_7       IOMUX_PAD(0x6C4, 0x2C4, 4, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_RS__GPIO_3_8        IOMUX_PAD(0x6C8, 0x2C8, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_PIN12__GPIO_3_1            IOMUX_PAD(0x6AC, 0x2AC, 4, 0x978, 1, NO_PAD_CTRL)
+#define MX51_PAD_DI1_PIN13__GPIO_3_2            IOMUX_PAD(0x6B0, 0x2B0, 4, 0x97c, 1, NO_PAD_CTRL)
+#define MX51_PAD_DI1_D0_CS__GPIO_3_3            IOMUX_PAD(0x6B4, 0x2B4, 4, 0x980, 1, NO_PAD_CTRL)
+#define MX51_PAD_DI1_D1_CS__GPIO_3_4            IOMUX_PAD(0x6B8, 0x2B8, 4, 0x984, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_DIN__GPIO_3_5       IOMUX_PAD(0x6BC, 0x2BC, 4, 0x988, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_DIO__GPIO_3_6       IOMUX_PAD(0x6C0, 0x2C0, 4, 0x98c, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_CLK__GPIO_3_7       IOMUX_PAD(0x6C4, 0x2C4, 4, 0x990, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_RS__GPIO_3_8        IOMUX_PAD(0x6C8, 0x2C8, 4, 0x994, 1, NO_PAD_CTRL)
 #define MX51_PAD_DISP1_DAT0__DISP1_DAT0         IOMUX_PAD(0x6CC, 0x2CC, 0, 0x0,   0, NO_PAD_CTRL)
 #define MX51_PAD_DISP1_DAT1__DISP1_DAT1         IOMUX_PAD(0x6D0, 0x2D0, 0, 0x0,   0, NO_PAD_CTRL)
 #define MX51_PAD_DISP1_DAT2__DISP1_DAT2         IOMUX_PAD(0x6D4, 0x2D4, 0, 0x0,   0, NO_PAD_CTRL)
@@ -294,32 +336,50 @@ typedef enum iomux_config {
 #define MX51_PAD_DISP2_DAT13__DISP2_DAT13       IOMUX_PAD(0x790, 0x388, 0, 0x0,   0, NO_PAD_CTRL)
 #define MX51_PAD_DISP2_DAT14__DISP2_DAT14       IOMUX_PAD(0x794, 0x38C, 0, 0x0,   0, NO_PAD_CTRL)
 #define MX51_PAD_DISP2_DAT15__DISP2_DAT15       IOMUX_PAD(0x798, 0x390, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_SD1_CMD__SD1_CMD               IOMUX_PAD(0x79C, 0x394, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_SD1_CLK__SD1_CLK               IOMUX_PAD(0x7A0, 0x398, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_SD1_DATA0__SD1_DATA0           IOMUX_PAD(0x7A4, 0x39C, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_SD1_DATA1__SD1_DATA1           IOMUX_PAD(0x7A8, 0x3A0, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_SD1_DATA2__SD1_DATA2           IOMUX_PAD(0x7AC, 0x3A4, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_SD1_DATA3__SD1_DATA3           IOMUX_PAD(0x7B0, 0x3A8, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_0__GPIO_1_0		IOMUX_PAD(0x7B4, 0x3AC, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_1__GPIO_1_1		IOMUX_PAD(0x7B8, 0x3B0, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_CMD__SD2_CMD               IOMUX_PAD(0x7BC, 0x3B4, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_CLK__SD2_CLK               IOMUX_PAD(0x7C0, 0x3B8, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_DATA0__SD2_DATA0           IOMUX_PAD(0x7C4, 0x3BC, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_DATA1__SD2_DATA1           IOMUX_PAD(0x7C8, 0x3C0, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_DATA2__SD2_DATA2           IOMUX_PAD(0x7CC, 0x3C4, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_DATA3__SD2_DATA3           IOMUX_PAD(0x7D0, 0x3C8, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_2__GPIO_1_2		IOMUX_PAD(0x7D4, 0x3CC, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_CMD__SD1_CMD		IOMUX_PAD(0x79C, 0x394, IOMUX_CONFIG_SION, 0x0, 0, \
+							MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_SD1_CMD__AUD5_RXFS             IOMUX_PAD(0x79C, 0x394, 1, 0x8e0, 1, NO_PAD_CTRL)
+#define MX51_PAD_SD1_CLK__SD1_CLK		IOMUX_PAD(0x7A0, 0x398, IOMUX_CONFIG_SION, 0x0, 0, \
+							MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS)
+#define MX51_PAD_SD1_CLK__AUD5_RXC              IOMUX_PAD(0x7A0, 0x398, 1, 0x8dc, 1, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA0__SD1_DATA0		IOMUX_PAD(0x7A4, 0x39C, IOMUX_CONFIG_SION, 0x0, 0, \
+							MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_SD1_DATA0__AUD5_TXD            IOMUX_PAD(0x7A4, 0x39C, 1, 0x8d8, 2, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA1__SD1_DATA1		IOMUX_PAD(0x7A8, 0x3A0, IOMUX_CONFIG_SION, 0x0, 0, \
+							MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_SD1_DATA1__AUD5_RXD            IOMUX_PAD(0x7A8, 0x3A0, 1, 0x8d4, 2, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA2__SD1_DATA2		IOMUX_PAD(0x7AC, 0x3A4, IOMUX_CONFIG_SION, 0x0, 0, \
+							MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_SD1_DATA2__AUD5_TXC            IOMUX_PAD(0x7AC, 0x3A4, 1, 0x8e4, 2, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA3__SD1_DATA3		IOMUX_PAD(0x7B0, 0x3A8, IOMUX_CONFIG_SION, 0x0, 0, \
+							MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_SD1_DATA3__AUD5_TXFS           IOMUX_PAD(0x7B0, 0x3A8, 1, 0x8e8, 2, NO_PAD_CTRL)
+#define MX51_PAD_SD2_CMD__SD2_CMD		IOMUX_PAD(0x7BC, 0x3B4, IOMUX_CONFIG_SION, 0x0, 1, \
+							MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_SD2_CLK__SD2_CLK		IOMUX_PAD(0x7C0, 0x3B8, IOMUX_CONFIG_SION, 0x0, 0, \
+							MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS)
+#define MX51_PAD_SD2_DATA0__SD2_DATA0		IOMUX_PAD(0x7C4, 0x3BC, IOMUX_CONFIG_SION, 0x0, 0, \
+							MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_SD2_DATA1__SD2_DATA1		IOMUX_PAD(0x7C8, 0x3C0, IOMUX_CONFIG_SION, 0x0, 0, \
+							MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_SD2_DATA2__SD2_DATA2		IOMUX_PAD(0x7CC, 0x3C4, IOMUX_CONFIG_SION, 0x0, 0, \
+							MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_SD2_DATA3__SD2_DATA3		IOMUX_PAD(0x7D0, 0x3C8, IOMUX_CONFIG_SION, 0x0, 0, \
+							MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_GPIO_1_0__GPIO_1_0		IOMUX_PAD(0x7B4, 0x3AC, 1, 0x0,   0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_1__GPIO_1_1		IOMUX_PAD(0x7B8, 0x3B0, 1, 0x0,   0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_2__GPIO_1_2		IOMUX_PAD(0x7D4, 0x3CC, 1, 0x0,   0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_GPIO_1_2__I2C2_SCL		IOMUX_PAD(0x7D4, 0x3CC, (2 | IOMUX_CONFIG_SION), \
 							0x9b8,   3, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_GPIO_1_3__GPIO_1_3		IOMUX_PAD(0x7D8, 0x3D0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_3__GPIO_1_3		IOMUX_PAD(0x7D8, 0x3D0, 1, 0x0,   0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_GPIO_1_3__I2C2_SDA		IOMUX_PAD(0x7D8, 0x3D0, (2 | IOMUX_CONFIG_SION), \
 							0x9bc,   3, MX51_I2C_PAD_CTRL)
 #define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ	IOMUX_PAD(0x7FC, 0x3D4, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_4__GPIO_1_4		IOMUX_PAD(0x804, 0x3D8, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_5__GPIO_1_5		IOMUX_PAD(0x808, 0x3DC, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_6__GPIO_1_6		IOMUX_PAD(0x80C, 0x3E0, 0, 0x0,   0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_7__GPIO_1_7		IOMUX_PAD(0x810, 0x3E4, 0, 0x0,   0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_8__GPIO_1_8		IOMUX_PAD(0x814, 0x3E8, 0, 0x0,   1, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_9__GPIO_1_9		IOMUX_PAD(0x818, 0x3EC, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_4__GPIO_1_4		IOMUX_PAD(0x804, 0x3D8, 1, 0x0,   0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_5__GPIO_1_5		IOMUX_PAD(0x808, 0x3DC, 1, 0x0,   0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_6__GPIO_1_6		IOMUX_PAD(0x80C, 0x3E0, 1, 0x0,   0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_7__GPIO_1_7		IOMUX_PAD(0x810, 0x3E4, 1, 0x0,   0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_8__GPIO_1_8		IOMUX_PAD(0x814, 0x3E8, 1, 0x0,   0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_9__GPIO_1_9		IOMUX_PAD(0x818, 0x3EC, 1, 0x0,   0, MX51_GPIO_PAD_CTRL)
 
 #endif /* __MACH_IOMUX_MX51_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iram.h b/arch/arm/plat-mxc/include/mach/iram.h
new file mode 100644
index 00000000000..022690c3370
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iram.h
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+#include <linux/errno.h>
+
+#ifdef CONFIG_IRAM_ALLOC
+
+int __init iram_init(unsigned long base, unsigned long size);
+void __iomem *iram_alloc(unsigned int size, unsigned long *dma_addr);
+void iram_free(unsigned long dma_addr, unsigned int size);
+
+#else
+
+static inline int __init iram_init(unsigned long base, unsigned long size)
+{
+	return -ENOMEM;
+}
+
+static inline void __iomem *iram_alloc(unsigned int size, unsigned long *dma_addr)
+{
+	return NULL;
+}
+
+static inline void iram_free(unsigned long base, unsigned long size) {}
+
+#endif
diff --git a/arch/arm/plat-mxc/include/mach/mx21.h b/arch/arm/plat-mxc/include/mach/mx21.h
index ed98b9c9f38..8bc59720b6e 100644
--- a/arch/arm/plat-mxc/include/mach/mx21.h
+++ b/arch/arm/plat-mxc/include/mach/mx21.h
@@ -120,7 +120,7 @@
 #define MX21_INT_GPT1		26
 #define MX21_INT_WDOG		27
 #define MX21_INT_PCMCIA		28
-#define MX21_INT_NANDFC		29
+#define MX21_INT_NFC		29
 #define MX21_INT_BMI		30
 #define MX21_INT_CSI		31
 #define MX21_INT_DMACH0		32
diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h
index 4a6f800990f..cf46a45b0d4 100644
--- a/arch/arm/plat-mxc/include/mach/mx25.h
+++ b/arch/arm/plat-mxc/include/mach/mx25.h
@@ -50,8 +50,11 @@
 #define MX25_SSI1_BASE_ADDR		0x50034000
 #define MX25_NFC_BASE_ADDR		0xbb000000
 #define MX25_DRYICE_BASE_ADDR		0x53ffc000
+#define MX25_ESDHC1_BASE_ADDR		0x53fb4000
+#define MX25_ESDHC2_BASE_ADDR		0x53fb8000
 #define MX25_LCDC_BASE_ADDR		0x53fbc000
 #define MX25_KPP_BASE_ADDR		0x43fa8000
+#define MX25_SDMA_BASE_ADDR		0x53fd4000
 #define MX25_OTG_BASE_ADDR		0x53ff4000
 #define MX25_CSI_BASE_ADDR		0x53ff8000
 
@@ -59,6 +62,8 @@
 #define MX25_INT_I2C1		3
 #define MX25_INT_I2C2		4
 #define MX25_INT_UART4		5
+#define MX25_INT_ESDHC2		8
+#define MX25_INT_ESDHC1		9
 #define MX25_INT_I2C3		10
 #define MX25_INT_SSI2		11
 #define MX25_INT_SSI1		12
@@ -69,7 +74,8 @@
 #define MX25_INT_KPP		24
 #define MX25_INT_DRYICE		25
 #define MX25_INT_UART2		32
-#define MX25_INT_NANDFC		33
+#define MX25_INT_NFC		33
+#define MX25_INT_SDMA		34
 #define MX25_INT_LCDC		39
 #define MX25_INT_UART5		40
 #define MX25_INT_CAN1		43
@@ -77,4 +83,13 @@
 #define MX25_INT_UART1		45
 #define MX25_INT_FEC		57
 
+#define MX25_DMA_REQ_SSI2_RX1	22
+#define MX25_DMA_REQ_SSI2_TX1	23
+#define MX25_DMA_REQ_SSI2_RX0	24
+#define MX25_DMA_REQ_SSI2_TX0	25
+#define MX25_DMA_REQ_SSI1_RX1	26
+#define MX25_DMA_REQ_SSI1_TX1	27
+#define MX25_DMA_REQ_SSI1_RX0	28
+#define MX25_DMA_REQ_SSI1_TX0	29
+
 #endif /* ifndef __MACH_MX25_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
index a8ab2e02a8c..2237ba2e535 100644
--- a/arch/arm/plat-mxc/include/mach/mx27.h
+++ b/arch/arm/plat-mxc/include/mach/mx27.h
@@ -167,7 +167,7 @@ static inline void mx27_setup_weimcs(size_t cs,
 #define MX27_INT_GPT1		26
 #define MX27_INT_WDOG		27
 #define MX27_INT_PCMCIA		28
-#define MX27_INT_NANDFC		29
+#define MX27_INT_NFC		29
 #define MX27_INT_ATA		30
 #define MX27_INT_CSI		31
 #define MX27_INT_DMACH0		32
diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h
index afee3ab9d62..03e2afabc9f 100644
--- a/arch/arm/plat-mxc/include/mach/mx31.h
+++ b/arch/arm/plat-mxc/include/mach/mx31.h
@@ -168,7 +168,7 @@ static inline void mx31_setup_weimcs(size_t cs,
 #define MX31_INT_POWER_FAIL	30
 #define MX31_INT_CCM_DVFS	31
 #define MX31_INT_UART2		32
-#define MX31_INT_NANDFC		33
+#define MX31_INT_NFC		33
 #define MX31_INT_SDMA		34
 #define MX31_INT_USB1		35
 #define MX31_INT_USB2		36
@@ -197,6 +197,15 @@ static inline void mx31_setup_weimcs(size_t cs,
 #define MX31_INT_EXT_WDOG	62
 #define MX31_INT_EXT_TV		63
 
+#define MX31_DMA_REQ_SSI2_RX1	22
+#define MX31_DMA_REQ_SSI2_TX1	23
+#define MX31_DMA_REQ_SSI2_RX0	24
+#define MX31_DMA_REQ_SSI2_TX0	25
+#define MX31_DMA_REQ_SSI1_RX1	26
+#define MX31_DMA_REQ_SSI1_TX1	27
+#define MX31_DMA_REQ_SSI1_RX0	28
+#define MX31_DMA_REQ_SSI1_TX0	29
+
 #define MX31_PROD_SIGNATURE		0x1	/* For MX31 */
 
 /* silicon revisions specific to i.MX31 */
diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h
index af3038c12e3..ff905cb3245 100644
--- a/arch/arm/plat-mxc/include/mach/mx35.h
+++ b/arch/arm/plat-mxc/include/mach/mx35.h
@@ -1,5 +1,6 @@
 #ifndef __MACH_MX35_H__
 #define __MACH_MX35_H__
+
 /*
  * IRAM
  */
@@ -52,6 +53,9 @@
 #define MX35_GPIO3_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xa4000)
 #define MX35_SCC_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xac000)
 #define MX35_RNGA_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xb0000)
+#define MX35_ESDHC1_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xb4000)
+#define MX35_ESDHC2_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xb8000)
+#define MX35_ESDHC3_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xbc000)
 #define MX35_IPU_CTRL_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xc0000)
 #define MX35_AUDMUX_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xc4000)
 #define MX35_GPIO1_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xcc000)
@@ -63,6 +67,8 @@
 #define MX35_CAN1_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xe4000)
 #define MX35_CAN2_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xe8000)
 #define MX35_RTIC_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xec000)
+#define MX35_IIM_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xf0000)
+
 #define MX35_OTG_BASE_ADDR		0x53ff4000
 
 #define MX35_ROMP_BASE_ADDR		0x60000000
@@ -122,9 +128,9 @@
 #define MX35_INT_I2C3		3
 #define MX35_INT_I2C2		4
 #define MX35_INT_RTIC		6
-#define MX35_INT_MMC_SDHC1	7
-#define MX35_INT_MMC_SDHC2	8
-#define MX35_INT_MMC_SDHC3	9
+#define MX35_INT_ESDHC1		7
+#define MX35_INT_ESDHC2		8
+#define MX35_INT_ESDHC3		9
 #define MX35_INT_I2C1		10
 #define MX35_INT_SSI1		11
 #define MX35_INT_SSI2		12
@@ -145,7 +151,7 @@
 #define MX35_INT_GPT		29
 #define MX35_INT_POWER_FAIL	30
 #define MX35_INT_UART2		32
-#define MX35_INT_NANDFC		33
+#define MX35_INT_NFC		33
 #define MX35_INT_SDMA		34
 #define MX35_INT_USBHS		35
 #define MX35_INT_USBOTG		37
@@ -173,22 +179,18 @@
 #define MX35_INT_EXT_WDOG	62
 #define MX35_INT_EXT_TV		63
 
+#define MX35_DMA_REQ_SSI2_RX1   22
+#define MX35_DMA_REQ_SSI2_TX1   23
+#define MX35_DMA_REQ_SSI2_RX0   24
+#define MX35_DMA_REQ_SSI2_TX0   25
+#define MX35_DMA_REQ_SSI1_RX1   26
+#define MX35_DMA_REQ_SSI1_TX1   27
+#define MX35_DMA_REQ_SSI1_RX0   28
+#define MX35_DMA_REQ_SSI1_TX0   29
+
 #define MX35_PROD_SIGNATURE		0x1	/* For MX31 */
 
-/* silicon revisions specific to i.MX31 */
-#define MX35_CHIP_REV_1_0		0x10
-#define MX35_CHIP_REV_1_1		0x11
-#define MX35_CHIP_REV_1_2		0x12
-#define MX35_CHIP_REV_1_3		0x13
-#define MX35_CHIP_REV_2_0		0x20
-#define MX35_CHIP_REV_2_1		0x21
-#define MX35_CHIP_REV_2_2		0x22
-#define MX35_CHIP_REV_2_3		0x23
-#define MX35_CHIP_REV_3_0		0x30
-#define MX35_CHIP_REV_3_1		0x31
-#define MX35_CHIP_REV_3_2		0x32
-
-#define MX35_SYSTEM_REV_MIN		MX35_CHIP_REV_1_0
+#define MX35_SYSTEM_REV_MIN		MX3x_CHIP_REV_1_0
 #define MX35_SYSTEM_REV_NUM		3
 
 #ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h
index 7a356de385f..d1bd26d7b8a 100644
--- a/arch/arm/plat-mxc/include/mach/mx3x.h
+++ b/arch/arm/plat-mxc/include/mach/mx3x.h
@@ -240,7 +240,7 @@
 
 #define MX3x_PROD_SIGNATURE		0x1	/* For MX31 */
 
-/* silicon revisions specific to i.MX31 */
+/* silicon revisions specific to i.MX31 and i.MX35 */
 #define MX3x_CHIP_REV_1_0		0x10
 #define MX3x_CHIP_REV_1_1		0x11
 #define MX3x_CHIP_REV_1_2		0x12
@@ -267,6 +267,14 @@ static inline int mx31_revision(void)
 {
 	return mx31_cpu_rev;
 }
+
+extern unsigned int mx35_cpu_rev;
+extern void mx35_read_cpu_rev(void);
+
+static inline int mx35_revision(void)
+{
+	return mx35_cpu_rev;
+}
 #endif
 
 #ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
@@ -389,19 +397,6 @@ static inline int mx31_revision(void)
 #define MXC_INT_EXT_WDOG MX3x_INT_EXT_WDOG
 #define MXC_INT_EXT_TV MX3x_INT_EXT_TV
 #define PROD_SIGNATURE MX3x_PROD_SIGNATURE
-#define CHIP_REV_1_0 MX3x_CHIP_REV_1_0
-#define CHIP_REV_1_1 MX3x_CHIP_REV_1_1
-#define CHIP_REV_1_2 MX3x_CHIP_REV_1_2
-#define CHIP_REV_1_3 MX3x_CHIP_REV_1_3
-#define CHIP_REV_2_0 MX3x_CHIP_REV_2_0
-#define CHIP_REV_2_1 MX3x_CHIP_REV_2_1
-#define CHIP_REV_2_2 MX3x_CHIP_REV_2_2
-#define CHIP_REV_2_3 MX3x_CHIP_REV_2_3
-#define CHIP_REV_3_0 MX3x_CHIP_REV_3_0
-#define CHIP_REV_3_1 MX3x_CHIP_REV_3_1
-#define CHIP_REV_3_2 MX3x_CHIP_REV_3_2
-#define SYSTEM_REV_MIN MX3x_SYSTEM_REV_MIN
-#define SYSTEM_REV_NUM MX3x_SYSTEM_REV_NUM
 #endif
 
 #endif /* ifndef __MACH_MX3x_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx51.h b/arch/arm/plat-mxc/include/mach/mx51.h
index 5aad344d565..2af7a1056fc 100644
--- a/arch/arm/plat-mxc/include/mach/mx51.h
+++ b/arch/arm/plat-mxc/include/mach/mx51.h
@@ -1,5 +1,5 @@
-#ifndef __ASM_ARCH_MXC_MX51_H__
-#define __ASM_ARCH_MXC_MX51_H__
+#ifndef __MACH_MX51_H__
+#define __MACH_MX51_H__
 
 /*
  * MX51 memory map:
@@ -7,24 +7,23 @@
  *
  * Virt		Phys		Size	What
  * ---------------------------------------------------------------------------
- * FA3E0000	1FFE0000	128K	IRAM (SCCv2 RAM)
+ * fa3e0000	1ffe0000	128K	IRAM (SCCv2 RAM)
  *         	30000000	256M	GPU
  *         	40000000	512M	IPU
- * FA200000	60000000	1M	DEBUG
- * FB100000	70000000	1M	SPBA 0
- * FB000000	73F00000	1M	AIPS 1
- * FB200000	83F00000	1M	AIPS 2
- *		8FFFC000	16K	TZIC (interrupt controller)
+ * fa200000	60000000	1M	DEBUG
+ * fb100000	70000000	1M	SPBA 0
+ * fb000000	73f00000	1M	AIPS 1
+ * fb200000	83f00000	1M	AIPS 2
+ *		8fffc000	16K	TZIC (interrupt controller)
  *         	90000000	256M	CSD0 SDRAM/DDR
- *         	A0000000	256M	CSD1 SDRAM/DDR
- *         	B0000000	128M	CS0 Flash
- *         	B8000000	128M	CS1 Flash
- *         	C0000000	128M	CS2 Flash
- *         	C8000000	64M	CS3 Flash
- *         	CC000000	32M	CS4 SRAM
- *         	CE000000	32M	CS5 SRAM
- *		CFFF0000	64K	NFC (NAND Flash AXI)
- *
+ *         	a0000000	256M	CSD1 SDRAM/DDR
+ *         	b0000000	128M	CS0 Flash
+ *         	b8000000	128M	CS1 Flash
+ *         	c0000000	128M	CS2 Flash
+ *         	c8000000	64M	CS3 Flash
+ *         	cc000000	32M	CS4 SRAM
+ *         	ce000000	32M	CS5 SRAM
+ *		cfff0000	64K	NFC (NAND Flash AXI)
  */
 
 /*
@@ -36,65 +35,151 @@
 /*
  * IRAM
  */
-#define MX51_IRAM_BASE_ADDR		0x1FFE0000	/* internal ram */
-#define MX51_IRAM_BASE_ADDR_VIRT	0xFA3E0000
+#define MX51_IRAM_BASE_ADDR		0x1ffe0000	/* internal ram */
+#define MX51_IRAM_BASE_ADDR_VIRT	0xfa3e0000
 #define MX51_IRAM_PARTITIONS		16
-#define MX51_IRAM_PARTITIONS_TO1	12
 #define MX51_IRAM_SIZE		(MX51_IRAM_PARTITIONS * SZ_8K)	/* 128KB */
 
+#define MX51_GPU_BASE_ADDR		0x20000000
+#define MX51_GPU_CTRL_BASE_ADDR		0x30000000
+#define MX51_IPU_CTRL_BASE_ADDR		0x40000000
+
+#define MX51_DEBUG_BASE_ADDR		0x60000000
+#define MX51_DEBUG_BASE_ADDR_VIRT	0xfa200000
+#define MX51_DEBUG_SIZE			SZ_1M
+
+#define MX51_ETB_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x01000)
+#define MX51_ETM_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x02000)
+#define MX51_TPIU_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x03000)
+#define MX51_CTI0_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x04000)
+#define MX51_CTI1_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x05000)
+#define MX51_CTI2_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x06000)
+#define MX51_CTI3_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x07000)
+#define MX51_CORTEX_DBG_BASE_ADDR	(MX51_DEBUG_BASE_ADDR + 0x08000)
+
 /*
- * NFC
+ * SPBA global module enabled #0
  */
-#define MX51_NFC_AXI_BASE_ADDR		0xCFFF0000	/* NAND flash AXI */
-#define MX51_NFC_AXI_SIZE		SZ_64K
+#define MX51_SPBA0_BASE_ADDR		0x70000000
+#define MX51_SPBA0_BASE_ADDR_VIRT	0xfb100000
+#define MX51_SPBA0_SIZE			SZ_1M
+
+#define MX51_ESDHC1_BASE_ADDR		(MX51_SPBA0_BASE_ADDR + 0x04000)
+#define MX51_ESDHC2_BASE_ADDR		(MX51_SPBA0_BASE_ADDR + 0x08000)
+#define MX51_UART3_BASE_ADDR		(MX51_SPBA0_BASE_ADDR + 0x0c000)
+#define MX51_ECSPI1_BASE_ADDR		(MX51_SPBA0_BASE_ADDR + 0x10000)
+#define MX51_SSI2_BASE_ADDR		(MX51_SPBA0_BASE_ADDR + 0x14000)
+#define MX51_ESDHC3_BASE_ADDR		(MX51_SPBA0_BASE_ADDR + 0x20000)
+#define MX51_ESDHC4_BASE_ADDR		(MX51_SPBA0_BASE_ADDR + 0x24000)
+#define MX51_SPDIF_BASE_ADDR		(MX51_SPBA0_BASE_ADDR + 0x28000)
+#define MX51_ATA_DMA_BASE_ADDR		(MX51_SPBA0_BASE_ADDR + 0x30000)
+#define MX51_SLIM_DMA_BASE_ADDR		(MX51_SPBA0_BASE_ADDR + 0x34000)
+#define MX51_HSI2C_DMA_BASE_ADDR	(MX51_SPBA0_BASE_ADDR + 0x38000)
+#define MX51_SPBA_CTRL_BASE_ADDR	(MX51_SPBA0_BASE_ADDR + 0x3c000)
 
 /*
- * Graphics Memory of GPU
+ * AIPS 1
  */
-#define MX51_GPU_BASE_ADDR		0x20000000
-#define MX51_GPU2D_BASE_ADDR		0xD0000000
+#define MX51_AIPS1_BASE_ADDR		0x73f00000
+#define MX51_AIPS1_BASE_ADDR_VIRT	0xfb000000
+#define MX51_AIPS1_SIZE			SZ_1M
+
+#define MX51_OTG_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0x80000)
+#define MX51_GPIO1_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0x84000)
+#define MX51_GPIO2_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0x88000)
+#define MX51_GPIO3_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0x8c000)
+#define MX51_GPIO4_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0x90000)
+#define MX51_KPP_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0x94000)
+#define MX51_WDOG_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0x98000)
+#define MX51_WDOG2_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0x9c000)
+#define MX51_GPT1_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0xa0000)
+#define MX51_SRTC_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0xa4000)
+#define MX51_IOMUXC_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0xa8000)
+#define MX51_EPIT1_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0xac000)
+#define MX51_EPIT2_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0xb0000)
+#define MX51_PWM1_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0xb4000)
+#define MX51_PWM2_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0xb8000)
+#define MX51_UART1_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0xbc000)
+#define MX51_UART2_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0xc0000)
+#define MX51_SRC_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0xd0000)
+#define MX51_CCM_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0xd4000)
+#define MX51_GPC_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0xd8000)
 
-#define MX51_TZIC_BASE_ADDR_TO1		0x8FFFC000
-#define MX51_TZIC_BASE_ADDR		0xE0000000
+/*
+ * AIPS 2
+ */
+#define MX51_AIPS2_BASE_ADDR		0x83f00000
+#define MX51_AIPS2_BASE_ADDR_VIRT	0xfb200000
+#define MX51_AIPS2_SIZE			SZ_1M
 
-#define MX51_DEBUG_BASE_ADDR		0x60000000
-#define MX51_DEBUG_BASE_ADDR_VIRT	0xFA200000
-#define MX51_DEBUG_SIZE			SZ_1M
-#define MX51_ETB_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x00001000)
-#define MX51_ETM_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x00002000)
-#define MX51_TPIU_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x00003000)
-#define MX51_CTI0_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x00004000)
-#define MX51_CTI1_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x00005000)
-#define MX51_CTI2_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x00006000)
-#define MX51_CTI3_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x00007000)
-#define MX51_CORTEX_DBG_BASE_ADDR	(MX51_DEBUG_BASE_ADDR + 0x00008000)
+#define MX51_PLL1_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0x80000)
+#define MX51_PLL2_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0x84000)
+#define MX51_PLL3_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0x88000)
+#define MX51_AHBMAX_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0x94000)
+#define MX51_IIM_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0x98000)
+#define MX51_CSU_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0x9c000)
+#define MX51_ARM_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xa0000)
+#define MX51_OWIRE_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xa4000)
+#define MX51_FIRI_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xa8000)
+#define MX51_ECSPI2_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xac000)
+#define MX51_SDMA_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xb0000)
+#define MX51_SCC_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xb4000)
+#define MX51_ROMCP_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xb8000)
+#define MX51_RTIC_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xbc000)
+#define MX51_CSPI_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xc0000)
+#define MX51_I2C2_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xc4000)
+#define MX51_I2C1_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xc8000)
+#define MX51_SSI1_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xcc000)
+#define MX51_AUDMUX_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xd0000)
+#define MX51_M4IF_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xd8000)
+#define MX51_ESDCTL_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xd9000)
+#define MX51_WEIM_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xda000)
+#define MX51_NFC_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xdb000)
+#define MX51_EMI_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xdbf00)
+#define MX51_MIPI_HSC_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xdc000)
+#define MX51_ATA_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xe0000)
+#define MX51_SIM_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xe4000)
+#define MX51_SSI3BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xe8000)
+#define MX51_FEC_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xec000)
+#define MX51_TVE_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xf0000)
+#define MX51_VPU_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xf4000)
+#define MX51_SAHARA_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xf8000)
+
+#define MX51_CSD0_BASE_ADDR		0x90000000
+#define MX51_CSD1_BASE_ADDR		0xa0000000
+#define MX51_CS0_BASE_ADDR		0xb0000000
+#define MX51_CS1_BASE_ADDR		0xb8000000
+#define MX51_CS2_BASE_ADDR		0xc0000000
+#define MX51_CS3_BASE_ADDR		0xc8000000
+#define MX51_CS4_BASE_ADDR		0xcc000000
+#define MX51_CS5_BASE_ADDR		0xce000000
 
 /*
- * SPBA global module enabled #0
+ * NFC
  */
-#define MX51_SPBA0_BASE_ADDR 		0x70000000
-#define MX51_SPBA0_BASE_ADDR_VIRT	0xFB100000
-#define MX51_SPBA0_SIZE			SZ_1M
+#define MX51_NFC_AXI_BASE_ADDR		0xcfff0000	/* NAND flash AXI */
+#define MX51_NFC_AXI_SIZE		SZ_64K
+
+#define MX51_GPU2D_BASE_ADDR		0xd0000000
+#define MX51_TZIC_BASE_ADDR		0xe0000000
 
-#define MX51_MMC_SDHC1_BASE_ADDR	(MX51_SPBA0_BASE_ADDR + 0x00004000)
-#define MX51_MMC_SDHC2_BASE_ADDR	(MX51_SPBA0_BASE_ADDR + 0x00008000)
-#define MX51_UART3_BASE_ADDR 		(MX51_SPBA0_BASE_ADDR + 0x0000C000)
-#define MX51_CSPI1_BASE_ADDR 		(MX51_SPBA0_BASE_ADDR + 0x00010000)
-#define MX51_SSI2_BASE_ADDR		(MX51_SPBA0_BASE_ADDR + 0x00014000)
-#define MX51_MMC_SDHC3_BASE_ADDR	(MX51_SPBA0_BASE_ADDR + 0x00020000)
-#define MX51_MMC_SDHC4_BASE_ADDR	(MX51_SPBA0_BASE_ADDR + 0x00024000)
-#define MX51_SPDIF_BASE_ADDR		(MX51_SPBA0_BASE_ADDR + 0x00028000)
-#define MX51_ATA_DMA_BASE_ADDR		(MX51_SPBA0_BASE_ADDR + 0x00030000)
-#define MX51_SLIM_DMA_BASE_ADDR		(MX51_SPBA0_BASE_ADDR + 0x00034000)
-#define MX51_HSI2C_DMA_BASE_ADDR	(MX51_SPBA0_BASE_ADDR + 0x00038000)
-#define MX51_SPBA_CTRL_BASE_ADDR	(MX51_SPBA0_BASE_ADDR + 0x0003C000)
+#define MX51_IO_ADDRESS(x) (						\
+	IMX_IO_ADDRESS(x, MX51_IRAM) ?:					\
+	IMX_IO_ADDRESS(x, MX51_DEBUG) ?:				\
+	IMX_IO_ADDRESS(x, MX51_SPBA0) ?:				\
+	IMX_IO_ADDRESS(x, MX51_AIPS1) ?:				\
+	IMX_IO_ADDRESS(x, MX51_AIPS2))
+
+/* This is currently used in <mach/debug-macro.S>, but should go away */
+#define MX51_AIPS1_IO_ADDRESS(x)  \
+	(((x) - MX51_AIPS1_BASE_ADDR) + MX51_AIPS1_BASE_ADDR_VIRT)
 
 /*
  * defines for SPBA modules
  */
 #define MX51_SPBA_SDHC1	0x04
 #define MX51_SPBA_SDHC2	0x08
-#define MX51_SPBA_UART3	0x0C
+#define MX51_SPBA_UART3	0x0c
 #define MX51_SPBA_CSPI1	0x10
 #define MX51_SPBA_SSI2	0x14
 #define MX51_SPBA_SDHC3	0x20
@@ -103,35 +188,7 @@
 #define MX51_SPBA_ATA	0x30
 #define MX51_SPBA_SLIM	0x34
 #define MX51_SPBA_HSI2C	0x38
-#define MX51_SPBA_CTRL	0x3C
-
-/*
- * AIPS 1
- */
-#define MX51_AIPS1_BASE_ADDR 	0x73F00000
-#define MX51_AIPS1_BASE_ADDR_VIRT	0xFB000000
-#define MX51_AIPS1_SIZE		SZ_1M
-
-#define MX51_OTG_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x00080000)
-#define MX51_GPIO1_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x00084000)
-#define MX51_GPIO2_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x00088000)
-#define MX51_GPIO3_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x0008C000)
-#define MX51_GPIO4_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x00090000)
-#define MX51_KPP_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x00094000)
-#define MX51_WDOG_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x00098000)
-#define MX51_WDOG2_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x0009C000)
-#define MX51_GPT1_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000A0000)
-#define MX51_SRTC_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000A4000)
-#define MX51_IOMUXC_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000A8000)
-#define MX51_EPIT1_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000AC000)
-#define MX51_EPIT2_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000B0000)
-#define MX51_PWM1_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000B4000)
-#define MX51_PWM2_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000B8000)
-#define MX51_UART1_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000BC000)
-#define MX51_UART2_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000C0000)
-#define MX51_SRC_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000D0000)
-#define MX51_CCM_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000D4000)
-#define MX51_GPC_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000D8000)
+#define MX51_SPBA_CTRL	0x3c
 
 /*
  * Defines for modules using static and dynamic DMA channels
@@ -164,282 +221,186 @@
 #define MX51_MXC_DMA_CHANNEL_ATA_TX	MXC_DMA_DYNAMIC_CHANNEL
 #define MX51_MXC_DMA_CHANNEL_MEMORY	MXC_DMA_DYNAMIC_CHANNEL
 
-/*
- * AIPS 2
- */
-#define MX51_AIPS2_BASE_ADDR		0x83F00000
-#define MX51_AIPS2_BASE_ADDR_VIRT	0xFB200000
-#define MX51_AIPS2_SIZE			SZ_1M
-
-#define MX51_PLL1_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x00080000)
-#define MX51_PLL2_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x00084000)
-#define MX51_PLL3_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x00088000)
-#define MX51_AHBMAX_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x00094000)
-#define MX51_IIM_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x00098000)
-#define MX51_CSU_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x0009C000)
-#define MX51_ARM_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000A0000)
-#define MX51_OWIRE_BASE_ADDR 	(MX51_AIPS2_BASE_ADDR + 0x000A4000)
-#define MX51_FIRI_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000A8000)
-#define MX51_CSPI2_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000AC000)
-#define MX51_SDMA_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000B0000)
-#define MX51_SCC_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000B4000)
-#define MX51_ROMCP_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000B8000)
-#define MX51_RTIC_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000BC000)
-#define MX51_CSPI3_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000C0000)
-#define MX51_I2C2_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000C4000)
-#define MX51_I2C1_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000C8000)
-#define MX51_SSI1_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000CC000)
-#define MX51_AUDMUX_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000D0000)
-#define MX51_M4IF_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000D8000)
-#define MX51_ESDCTL_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000D9000)
-#define MX51_WEIM_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000DA000)
-#define MX51_NFC_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000DB000)
-#define MX51_EMI_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000DBF00)
-#define MX51_MIPI_HSC_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000DC000)
-#define MX51_ATA_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000E0000)
-#define MX51_SIM_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000E4000)
-#define MX51_SSI3BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000E8000)
-#define MX51_MXC_FEC_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000EC000)
-#define MX51_TVE_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000F0000)
-#define MX51_VPU_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000F4000)
-#define MX51_SAHARA_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000F8000)
-
-/*
- * Memory regions and CS
- */
-#define MX51_GPU_CTRL_BASE_ADDR		0x30000000
-#define MX51_IPU_CTRL_BASE_ADDR		0x40000000
-#define MX51_CSD0_BASE_ADDR		0x90000000
-#define MX51_CSD1_BASE_ADDR		0xA0000000
-#define MX51_CS0_BASE_ADDR		0xB0000000
-#define MX51_CS1_BASE_ADDR		0xB8000000
-#define MX51_CS2_BASE_ADDR		0xC0000000
-#define MX51_CS3_BASE_ADDR		0xC8000000
-#define MX51_CS4_BASE_ADDR		0xCC000000
-#define MX51_CS5_BASE_ADDR		0xCE000000
-
-/* Does given address belongs to the specified memory region? */
-#define ADDRESS_IN_REGION(addr, start, size)			\
-	(((addr) >= (start)) && ((addr) < (start)+(size)))
-
-/* Does given address belongs to the specified named `module'? */
-#define MX51_IS_MODULE(addr, module)			       \
-	ADDRESS_IN_REGION(addr, MX51_ ## module ## _BASE_ADDR, \
-				MX51_ ## module ## _SIZE)
-/*
- * This macro defines the physical to virtual address mapping for all the
- * peripheral modules. It is used by passing in the physical address as x
- * and returning the virtual address. If the physical address is not mapped,
- * it returns 0xDEADBEEF
- */
-
-#define MX51_IO_ADDRESS(x)					\
-	(void __iomem *)					\
-	(MX51_IS_MODULE(x, IRAM) ? MX51_IRAM_IO_ADDRESS(x) :	\
-	MX51_IS_MODULE(x, DEBUG) ? MX51_DEBUG_IO_ADDRESS(x) :	\
-	MX51_IS_MODULE(x, SPBA0) ? MX51_SPBA0_IO_ADDRESS(x) :	\
-	MX51_IS_MODULE(x, AIPS1) ? MX51_AIPS1_IO_ADDRESS(x) :	\
-	MX51_IS_MODULE(x, AIPS2) ? MX51_AIPS2_IO_ADDRESS(x) : \
-	0xDEADBEEF)
-
-/*
- * define the address mapping macros: in physical address order
- */
-#define MX51_IRAM_IO_ADDRESS(x)  \
-	(((x) - MX51_IRAM_BASE_ADDR) + MX51_IRAM_BASE_ADDR_VIRT)
-
-#define MX51_DEBUG_IO_ADDRESS(x)  \
-	(((x) - MX51_DEBUG_BASE_ADDR) + MX51_DEBUG_BASE_ADDR_VIRT)
-
-#define MX51_SPBA0_IO_ADDRESS(x)  \
-	(((x) - MX51_SPBA0_BASE_ADDR) + MX51_SPBA0_BASE_ADDR_VIRT)
-
-#define MX51_AIPS1_IO_ADDRESS(x)  \
-	(((x) - MX51_AIPS1_BASE_ADDR) + MX51_AIPS1_BASE_ADDR_VIRT)
-
-#define MX51_AIPS2_IO_ADDRESS(x)  \
-	(((x) - MX51_AIPS2_BASE_ADDR) + MX51_AIPS2_BASE_ADDR_VIRT)
-
 #define MX51_IS_MEM_DEVICE_NONSHARED(x)		0
 
 /*
  * DMA request assignments
  */
-#define MX51_DMA_REQ_SSI3_TX1	47
-#define MX51_DMA_REQ_SSI3_RX1	46
-#define MX51_DMA_REQ_SPDIF	45
-#define MX51_DMA_REQ_UART3_TX	44
-#define MX51_DMA_REQ_UART3_RX	43
-#define MX51_DMA_REQ_SLIM_B_TX	42
-#define MX51_DMA_REQ_SDHC4	41
-#define MX51_DMA_REQ_SDHC3	40
-#define MX51_DMA_REQ_CSPI_TX	39
-#define MX51_DMA_REQ_CSPI_RX	38
-#define MX51_DMA_REQ_SSI3_TX2	37
-#define MX51_DMA_REQ_IPU	36
-#define MX51_DMA_REQ_SSI3_RX2	35
-#define MX51_DMA_REQ_EPIT2	34
-#define MX51_DMA_REQ_CTI2_1	33
-#define MX51_DMA_REQ_EMI_WR	32
-#define MX51_DMA_REQ_CTI2_0	31
-#define MX51_DMA_REQ_EMI_RD	30
-#define MX51_DMA_REQ_SSI1_TX1	29
-#define MX51_DMA_REQ_SSI1_RX1	28
-#define MX51_DMA_REQ_SSI1_TX2	27
-#define MX51_DMA_REQ_SSI1_RX2	26
-#define MX51_DMA_REQ_SSI2_TX1	25
-#define MX51_DMA_REQ_SSI2_RX1	24
-#define MX51_DMA_REQ_SSI2_TX2	23
-#define MX51_DMA_REQ_SSI2_RX2	22
-#define MX51_DMA_REQ_SDHC2	21
-#define MX51_DMA_REQ_SDHC1	20
-#define MX51_DMA_REQ_UART1_TX	19
-#define MX51_DMA_REQ_UART1_RX	18
-#define MX51_DMA_REQ_UART2_TX	17
-#define MX51_DMA_REQ_UART2_RX	16
-#define MX51_DMA_REQ_GPU	15
-#define MX51_DMA_REQ_EXTREQ1	14
-#define MX51_DMA_REQ_FIRI_TX	13
-#define MX51_DMA_REQ_FIRI_RX	12
-#define MX51_DMA_REQ_HS_I2C_RX	11
-#define MX51_DMA_REQ_HS_I2C_TX	10
-#define MX51_DMA_REQ_CSPI2_TX	9
-#define MX51_DMA_REQ_CSPI2_RX	8
-#define MX51_DMA_REQ_CSPI1_TX	7
-#define MX51_DMA_REQ_CSPI1_RX	6
-#define MX51_DMA_REQ_SLIM_B	5
-#define MX51_DMA_REQ_ATA_TX_END	4
-#define MX51_DMA_REQ_ATA_TX	3
-#define MX51_DMA_REQ_ATA_RX	2
-#define MX51_DMA_REQ_GPC	1
-#define MX51_DMA_REQ_VPU	0
+#define MX51_DMA_REQ_VPU		0
+#define MX51_DMA_REQ_GPC		1
+#define MX51_DMA_REQ_ATA_RX		2
+#define MX51_DMA_REQ_ATA_TX		3
+#define MX51_DMA_REQ_ATA_TX_END		4
+#define MX51_DMA_REQ_SLIM_B		5
+#define MX51_DMA_REQ_CSPI1_RX		6
+#define MX51_DMA_REQ_CSPI1_TX		7
+#define MX51_DMA_REQ_CSPI2_RX		8
+#define MX51_DMA_REQ_CSPI2_TX		9
+#define MX51_DMA_REQ_HS_I2C_TX		10
+#define MX51_DMA_REQ_HS_I2C_RX		11
+#define MX51_DMA_REQ_FIRI_RX		12
+#define MX51_DMA_REQ_FIRI_TX		13
+#define MX51_DMA_REQ_EXTREQ1		14
+#define MX51_DMA_REQ_GPU		15
+#define MX51_DMA_REQ_UART2_RX		16
+#define MX51_DMA_REQ_UART2_TX		17
+#define MX51_DMA_REQ_UART1_RX		18
+#define MX51_DMA_REQ_UART1_TX		19
+#define MX51_DMA_REQ_SDHC1		20
+#define MX51_DMA_REQ_SDHC2		21
+#define MX51_DMA_REQ_SSI2_RX1		22
+#define MX51_DMA_REQ_SSI2_TX1		23
+#define MX51_DMA_REQ_SSI2_RX0		24
+#define MX51_DMA_REQ_SSI2_TX0		25
+#define MX51_DMA_REQ_SSI1_RX1		26
+#define MX51_DMA_REQ_SSI1_TX1		27
+#define MX51_DMA_REQ_SSI1_RX0		28
+#define MX51_DMA_REQ_SSI1_TX0		29
+#define MX51_DMA_REQ_EMI_RD		30
+#define MX51_DMA_REQ_CTI2_0		31
+#define MX51_DMA_REQ_EMI_WR		32
+#define MX51_DMA_REQ_CTI2_1		33
+#define MX51_DMA_REQ_EPIT2		34
+#define MX51_DMA_REQ_SSI3_RX2		35
+#define MX51_DMA_REQ_IPU		36
+#define MX51_DMA_REQ_SSI3_TX2		37
+#define MX51_DMA_REQ_CSPI_RX		38
+#define MX51_DMA_REQ_CSPI_TX		39
+#define MX51_DMA_REQ_SDHC3		40
+#define MX51_DMA_REQ_SDHC4		41
+#define MX51_DMA_REQ_SLIM_B_TX		42
+#define MX51_DMA_REQ_UART3_RX		43
+#define MX51_DMA_REQ_UART3_TX		44
+#define MX51_DMA_REQ_SPDIF		45
+#define MX51_DMA_REQ_SSI3_RX1		46
+#define MX51_DMA_REQ_SSI3_TX1		47
 
 /*
  * Interrupt numbers
  */
-#define MX51_MXC_INT_BASE	0
-#define MX51_MXC_INT_RESV0	0
-#define MX51_MXC_INT_MMC_SDHC1	1
-#define MX51_MXC_INT_MMC_SDHC2	2
-#define MX51_MXC_INT_MMC_SDHC3	3
-#define MX51_MXC_INT_MMC_SDHC4	4
-#define MX51_MXC_INT_RESV5	5
-#define MX51_MXC_INT_SDMA	6
-#define MX51_MXC_INT_IOMUX	7
-#define MX51_MXC_INT_NFC	8
-#define MX51_MXC_INT_VPU	9
-#define MX51_MXC_INT_IPU_ERR	10
-#define MX51_MXC_INT_IPU_SYN	11
-#define MX51_MXC_INT_GPU	12
-#define MX51_MXC_INT_RESV13	13
-#define MX51_MXC_INT_USB_H1	14
-#define MX51_MXC_INT_EMI	15
-#define MX51_MXC_INT_USB_H2	16
-#define MX51_MXC_INT_USB_H3	17
-#define MX51_MXC_INT_USB_OTG	18
-#define MX51_MXC_INT_SAHARA_H0	19
-#define MX51_MXC_INT_SAHARA_H1	20
-#define MX51_MXC_INT_SCC_SMN	21
-#define MX51_MXC_INT_SCC_STZ	22
-#define MX51_MXC_INT_SCC_SCM	23
-#define MX51_MXC_INT_SRTC_NTZ	24
-#define MX51_MXC_INT_SRTC_TZ	25
-#define MX51_MXC_INT_RTIC	26
-#define MX51_MXC_INT_CSU	27
-#define MX51_MXC_INT_SLIM_B	28
-#define MX51_MXC_INT_SSI1	29
-#define MX51_MXC_INT_SSI2	30
-#define MX51_MXC_INT_UART1	31
-#define MX51_MXC_INT_UART2	32
-#define MX51_MXC_INT_UART3	33
-#define MX51_MXC_INT_RESV34	34
-#define MX51_MXC_INT_RESV35	35
-#define MX51_MXC_INT_CSPI1	36
-#define MX51_MXC_INT_CSPI2	37
-#define MX51_MXC_INT_CSPI	38
-#define MX51_MXC_INT_GPT	39
-#define MX51_MXC_INT_EPIT1	40
-#define MX51_MXC_INT_EPIT2	41
-#define MX51_MXC_INT_GPIO1_INT7	42
-#define MX51_MXC_INT_GPIO1_INT6	43
-#define MX51_MXC_INT_GPIO1_INT5	44
-#define MX51_MXC_INT_GPIO1_INT4	45
-#define MX51_MXC_INT_GPIO1_INT3	46
-#define MX51_MXC_INT_GPIO1_INT2	47
-#define MX51_MXC_INT_GPIO1_INT1	48
-#define MX51_MXC_INT_GPIO1_INT0	49
-#define MX51_MXC_INT_GPIO1_LOW	50
-#define MX51_MXC_INT_GPIO1_HIGH	51
-#define MX51_MXC_INT_GPIO2_LOW	52
-#define MX51_MXC_INT_GPIO2_HIGH	53
-#define MX51_MXC_INT_GPIO3_LOW	54
-#define MX51_MXC_INT_GPIO3_HIGH	55
-#define MX51_MXC_INT_GPIO4_LOW	56
-#define MX51_MXC_INT_GPIO4_HIGH	57
-#define MX51_MXC_INT_WDOG1	58
-#define MX51_MXC_INT_WDOG2	59
-#define MX51_MXC_INT_KPP	60
-#define MX51_MXC_INT_PWM1	61
-#define MX51_MXC_INT_I2C1	62
-#define MX51_MXC_INT_I2C2	63
-#define MX51_MXC_INT_HS_I2C	64
-#define MX51_MXC_INT_RESV65	65
-#define MX51_MXC_INT_RESV66	66
-#define MX51_MXC_INT_SIM_IPB	67
-#define MX51_MXC_INT_SIM_DAT	68
-#define MX51_MXC_INT_IIM	69
-#define MX51_MXC_INT_ATA	70
-#define MX51_MXC_INT_CCM1	71
-#define MX51_MXC_INT_CCM2	72
-#define MX51_MXC_INT_GPC1	73
-#define MX51_MXC_INT_GPC2	74
-#define MX51_MXC_INT_SRC	75
-#define MX51_MXC_INT_NM		76
-#define MX51_MXC_INT_PMU	77
-#define MX51_MXC_INT_CTI_IRQ	78
-#define MX51_MXC_INT_CTI1_TG0	79
-#define MX51_MXC_INT_CTI1_TG1	80
-#define MX51_MXC_INT_MCG_ERR	81
-#define MX51_MXC_INT_MCG_TMR	82
-#define MX51_MXC_INT_MCG_FUNC	83
-#define MX51_MXC_INT_GPU2_IRQ	84
-#define MX51_MXC_INT_GPU2_BUSY	85
-#define MX51_MXC_INT_RESV86	86
-#define MX51_MXC_INT_FEC	87
-#define MX51_MXC_INT_OWIRE	88
-#define MX51_MXC_INT_CTI1_TG2	89
-#define MX51_MXC_INT_SJC	90
-#define MX51_MXC_INT_SPDIF	91
-#define MX51_MXC_INT_TVE	92
-#define MX51_MXC_INT_FIRI	93
-#define MX51_MXC_INT_PWM2	94
-#define MX51_MXC_INT_SLIM_EXP	95
-#define MX51_MXC_INT_SSI3	96
-#define MX51_MXC_INT_EMI_BOOT	97
-#define MX51_MXC_INT_CTI1_TG3	98
-#define MX51_MXC_INT_SMC_RX	99
-#define MX51_MXC_INT_VPU_IDLE	100
-#define MX51_MXC_INT_EMI_NFC	101
-#define MX51_MXC_INT_GPU_IDLE	102
+#define MX51_MXC_INT_BASE		0
+#define MX51_MXC_INT_RESV0		0
+#define MX51_INT_ESDHC1			1
+#define MX51_INT_ESDHC2			2
+#define MX51_INT_ESDHC3			3
+#define MX51_INT_ESDHC4			4
+#define MX51_MXC_INT_RESV5		5
+#define MX51_INT_SDMA			6
+#define MX51_MXC_INT_IOMUX		7
+#define MX51_INT_NFC			8
+#define MX51_MXC_INT_VPU		9
+#define MX51_MXC_INT_IPU_ERR		10
+#define MX51_MXC_INT_IPU_SYN		11
+#define MX51_MXC_INT_GPU		12
+#define MX51_MXC_INT_RESV13		13
+#define MX51_MXC_INT_USB_H1		14
+#define MX51_MXC_INT_EMI		15
+#define MX51_MXC_INT_USB_H2		16
+#define MX51_MXC_INT_USB_H3		17
+#define MX51_MXC_INT_USB_OTG		18
+#define MX51_MXC_INT_SAHARA_H0		19
+#define MX51_MXC_INT_SAHARA_H1		20
+#define MX51_MXC_INT_SCC_SMN		21
+#define MX51_MXC_INT_SCC_STZ		22
+#define MX51_MXC_INT_SCC_SCM		23
+#define MX51_MXC_INT_SRTC_NTZ		24
+#define MX51_MXC_INT_SRTC_TZ		25
+#define MX51_MXC_INT_RTIC		26
+#define MX51_MXC_INT_CSU		27
+#define MX51_MXC_INT_SLIM_B		28
+#define MX51_INT_SSI1			29
+#define MX51_INT_SSI2			30
+#define MX51_INT_UART1			31
+#define MX51_INT_UART2			32
+#define MX51_INT_UART3			33
+#define MX51_MXC_INT_RESV34		34
+#define MX51_MXC_INT_RESV35		35
+#define MX51_INT_ECSPI1			36
+#define MX51_INT_ECSPI2			37
+#define MX51_INT_CSPI			38
+#define MX51_MXC_INT_GPT		39
+#define MX51_MXC_INT_EPIT1		40
+#define MX51_MXC_INT_EPIT2		41
+#define MX51_MXC_INT_GPIO1_INT7		42
+#define MX51_MXC_INT_GPIO1_INT6		43
+#define MX51_MXC_INT_GPIO1_INT5		44
+#define MX51_MXC_INT_GPIO1_INT4		45
+#define MX51_MXC_INT_GPIO1_INT3		46
+#define MX51_MXC_INT_GPIO1_INT2		47
+#define MX51_MXC_INT_GPIO1_INT1		48
+#define MX51_MXC_INT_GPIO1_INT0		49
+#define MX51_MXC_INT_GPIO1_LOW		50
+#define MX51_MXC_INT_GPIO1_HIGH		51
+#define MX51_MXC_INT_GPIO2_LOW		52
+#define MX51_MXC_INT_GPIO2_HIGH		53
+#define MX51_MXC_INT_GPIO3_LOW		54
+#define MX51_MXC_INT_GPIO3_HIGH		55
+#define MX51_MXC_INT_GPIO4_LOW		56
+#define MX51_MXC_INT_GPIO4_HIGH		57
+#define MX51_MXC_INT_WDOG1		58
+#define MX51_MXC_INT_WDOG2		59
+#define MX51_MXC_INT_KPP		60
+#define MX51_MXC_INT_PWM1		61
+#define MX51_INT_I2C1			62
+#define MX51_INT_I2C2			63
+#define MX51_MXC_INT_HS_I2C		64
+#define MX51_MXC_INT_RESV65		65
+#define MX51_MXC_INT_RESV66		66
+#define MX51_MXC_INT_SIM_IPB		67
+#define MX51_MXC_INT_SIM_DAT		68
+#define MX51_MXC_INT_IIM		69
+#define MX51_MXC_INT_ATA		70
+#define MX51_MXC_INT_CCM1		71
+#define MX51_MXC_INT_CCM2		72
+#define MX51_MXC_INT_GPC1		73
+#define MX51_MXC_INT_GPC2		74
+#define MX51_MXC_INT_SRC		75
+#define MX51_MXC_INT_NM			76
+#define MX51_MXC_INT_PMU		77
+#define MX51_MXC_INT_CTI_IRQ		78
+#define MX51_MXC_INT_CTI1_TG0		79
+#define MX51_MXC_INT_CTI1_TG1		80
+#define MX51_MXC_INT_MCG_ERR		81
+#define MX51_MXC_INT_MCG_TMR		82
+#define MX51_MXC_INT_MCG_FUNC		83
+#define MX51_MXC_INT_GPU2_IRQ		84
+#define MX51_MXC_INT_GPU2_BUSY		85
+#define MX51_MXC_INT_RESV86		86
+#define MX51_INT_FEC			87
+#define MX51_MXC_INT_OWIRE		88
+#define MX51_MXC_INT_CTI1_TG2		89
+#define MX51_MXC_INT_SJC		90
+#define MX51_MXC_INT_SPDIF		91
+#define MX51_MXC_INT_TVE		92
+#define MX51_MXC_INT_FIRI		93
+#define MX51_MXC_INT_PWM2		94
+#define MX51_MXC_INT_SLIM_EXP		95
+#define MX51_MXC_INT_SSI3		96
+#define MX51_MXC_INT_EMI_BOOT		97
+#define MX51_MXC_INT_CTI1_TG3		98
+#define MX51_MXC_INT_SMC_RX		99
+#define MX51_MXC_INT_VPU_IDLE		100
+#define MX51_MXC_INT_EMI_NFC		101
+#define MX51_MXC_INT_GPU_IDLE		102
 
 /* silicon revisions specific to i.MX51 */
-#define MX51_CHIP_REV_1_0	0x10
-#define MX51_CHIP_REV_1_1	0x11
-#define MX51_CHIP_REV_1_2	0x12
-#define MX51_CHIP_REV_1_3	0x13
-#define MX51_CHIP_REV_2_0	0x20
-#define MX51_CHIP_REV_2_1	0x21
-#define MX51_CHIP_REV_2_2	0x22
-#define MX51_CHIP_REV_2_3	0x23
-#define MX51_CHIP_REV_3_0	0x30
-#define MX51_CHIP_REV_3_1	0x31
-#define MX51_CHIP_REV_3_2	0x32
-
-/* Mandatory defines used globally */
+#define MX51_CHIP_REV_1_0		0x10
+#define MX51_CHIP_REV_1_1		0x11
+#define MX51_CHIP_REV_1_2		0x12
+#define MX51_CHIP_REV_1_3		0x13
+#define MX51_CHIP_REV_2_0		0x20
+#define MX51_CHIP_REV_2_1		0x21
+#define MX51_CHIP_REV_2_2		0x22
+#define MX51_CHIP_REV_2_3		0x23
+#define MX51_CHIP_REV_3_0		0x30
+#define MX51_CHIP_REV_3_1		0x31
+#define MX51_CHIP_REV_3_2		0x32
 
 #if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
-
 extern int mx51_revision(void);
 #endif
 
-#endif	/*  __ASM_ARCH_MXC_MX51_H__ */
+/* tape-out 1 defines */
+#define MX51_TZIC_BASE_ADDR_TO1		0x8fffc000
+
+#endif	/* ifndef __MACH_MX51_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h
index 4acd1143a9b..95be51bfe9a 100644
--- a/arch/arm/plat-mxc/include/mach/system.h
+++ b/arch/arm/plat-mxc/include/mach/system.h
@@ -1,7 +1,7 @@
 /*
  *  Copyright (C) 1999 ARM Limited
  *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *  Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *  Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -28,8 +28,34 @@ static inline void arch_idle(void)
 		mxc91231_prepare_idle();
 	}
 #endif
-
-	cpu_do_idle();
+	/* fix i.MX31 errata TLSbo65953 and i.MX35 errata ENGcm09472 */
+	if (cpu_is_mx31() || cpu_is_mx35()) {
+		unsigned long reg = 0;
+		__asm__ __volatile__(
+			/* disable I and D cache */
+			"mrc p15, 0, %0, c1, c0, 0\n"
+			"bic %0, %0, #0x00001000\n"
+			"bic %0, %0, #0x00000004\n"
+			"mcr p15, 0, %0, c1, c0, 0\n"
+			/* invalidate I cache */
+			"mov %0, #0\n"
+			"mcr p15, 0, %0, c7, c5, 0\n"
+			/* clear and invalidate D cache */
+			"mov %0, #0\n"
+			"mcr p15, 0, %0, c7, c14, 0\n"
+			/* WFI */
+			"mov %0, #0\n"
+			"mcr p15, 0, %0, c7, c0, 4\n"
+			"nop\n" "nop\n" "nop\n" "nop\n"
+			"nop\n" "nop\n" "nop\n"
+			/* enable I and D cache */
+			"mrc p15, 0, %0, c1, c0, 0\n"
+			"orr %0, %0, #0x00001000\n"
+			"orr %0, %0, #0x00000004\n"
+			"mcr p15, 0, %0, c1, c0, 0\n"
+			: "=r" (reg));
+	} else
+		cpu_do_idle();
 }
 
 void arch_reset(char mode, const char *cmd);
diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
index d9bd37e4667..9dd9c2085aa 100644
--- a/arch/arm/plat-mxc/include/mach/uncompress.h
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -99,6 +99,7 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id)
 		uart_base = MX3X_UART2_BASE_ADDR;
 		break;
 	case MACH_TYPE_MX51_BABBAGE:
+	case MACH_TYPE_EUKREA_CPUIMX51SD:
 		uart_base = MX51_UART1_BASE_ADDR;
 		break;
 	default:
diff --git a/arch/arm/plat-mxc/iram_alloc.c b/arch/arm/plat-mxc/iram_alloc.c
new file mode 100644
index 00000000000..074c3869626
--- /dev/null
+++ b/arch/arm/plat-mxc/iram_alloc.c
@@ -0,0 +1,73 @@
+/*
+ * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/genalloc.h>
+#include <mach/iram.h>
+
+static unsigned long iram_phys_base;
+static void __iomem *iram_virt_base;
+static struct gen_pool *iram_pool;
+
+static inline void __iomem *iram_phys_to_virt(unsigned long p)
+{
+	return iram_virt_base + (p - iram_phys_base);
+}
+
+void __iomem *iram_alloc(unsigned int size, unsigned long *dma_addr)
+{
+	if (!iram_pool)
+		return NULL;
+
+	*dma_addr = gen_pool_alloc(iram_pool, size);
+	pr_debug("iram alloc - %dB@0x%lX\n", size, *dma_addr);
+	if (!*dma_addr)
+		return NULL;
+	return iram_phys_to_virt(*dma_addr);
+}
+EXPORT_SYMBOL(iram_alloc);
+
+void iram_free(unsigned long addr, unsigned int size)
+{
+	if (!iram_pool)
+		return;
+
+	gen_pool_free(iram_pool, addr, size);
+}
+EXPORT_SYMBOL(iram_free);
+
+int __init iram_init(unsigned long base, unsigned long size)
+{
+	iram_phys_base = base;
+
+	iram_pool = gen_pool_create(PAGE_SHIFT, -1);
+	if (!iram_pool)
+		return -ENOMEM;
+
+	gen_pool_add(iram_pool, base, size, -1);
+	iram_virt_base = ioremap(iram_phys_base, size);
+	if (!iram_virt_base)
+		return -EIO;
+
+	pr_debug("i.MX IRAM pool: %ld KB@0x%p\n", size / 1024, iram_virt_base);
+	return 0;
+}
diff --git a/arch/arm/plat-nomadik/gpio.c b/arch/arm/plat-nomadik/gpio.c
index 977c8f9a07a..85e6fd212a4 100644
--- a/arch/arm/plat-nomadik/gpio.c
+++ b/arch/arm/plat-nomadik/gpio.c
@@ -102,6 +102,22 @@ static void __nmk_gpio_make_input(struct nmk_gpio_chip *nmk_chip,
 	writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRC);
 }
 
+static void __nmk_gpio_set_output(struct nmk_gpio_chip *nmk_chip,
+				  unsigned offset, int val)
+{
+	if (val)
+		writel(1 << offset, nmk_chip->addr + NMK_GPIO_DATS);
+	else
+		writel(1 << offset, nmk_chip->addr + NMK_GPIO_DATC);
+}
+
+static void __nmk_gpio_make_output(struct nmk_gpio_chip *nmk_chip,
+				  unsigned offset, int val)
+{
+	writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRS);
+	__nmk_gpio_set_output(nmk_chip, offset, val);
+}
+
 static void __nmk_config_pin(struct nmk_gpio_chip *nmk_chip, unsigned offset,
 			     pin_cfg_t cfg)
 {
@@ -118,20 +134,29 @@ static void __nmk_config_pin(struct nmk_gpio_chip *nmk_chip, unsigned offset,
 		[3] /* illegal */	= "??"
 	};
 	static const char *slpmnames[] = {
-		[NMK_GPIO_SLPM_INPUT]		= "input",
-		[NMK_GPIO_SLPM_NOCHANGE]	= "no-change",
+		[NMK_GPIO_SLPM_INPUT]		= "input/wakeup",
+		[NMK_GPIO_SLPM_NOCHANGE]	= "no-change/no-wakeup",
 	};
 
 	int pin = PIN_NUM(cfg);
 	int pull = PIN_PULL(cfg);
 	int af = PIN_ALT(cfg);
 	int slpm = PIN_SLPM(cfg);
+	int output = PIN_DIR(cfg);
+	int val = PIN_VAL(cfg);
 
-	dev_dbg(nmk_chip->chip.dev, "pin %d: af %s, pull %s, slpm %s\n",
-		pin, afnames[af], pullnames[pull], slpmnames[slpm]);
+	dev_dbg(nmk_chip->chip.dev, "pin %d: af %s, pull %s, slpm %s (%s%s)\n",
+		pin, afnames[af], pullnames[pull], slpmnames[slpm],
+		output ? "output " : "input",
+		output ? (val ? "high" : "low") : "");
+
+	if (output)
+		__nmk_gpio_make_output(nmk_chip, offset, val);
+	else {
+		__nmk_gpio_make_input(nmk_chip, offset);
+		__nmk_gpio_set_pull(nmk_chip, offset, pull);
+	}
 
-	__nmk_gpio_make_input(nmk_chip, offset);
-	__nmk_gpio_set_pull(nmk_chip, offset, pull);
 	__nmk_gpio_set_slpm(nmk_chip, offset, slpm);
 	__nmk_gpio_set_mode(nmk_chip, offset, af);
 }
@@ -200,6 +225,10 @@ EXPORT_SYMBOL(nmk_config_pins);
  * changed to an input (with pullup/down enabled) in sleep and deep sleep.  If
  * @mode is NMK_GPIO_SLPM_NOCHANGE, the pin remains in the state it was
  * configured even when in sleep and deep sleep.
+ *
+ * On DB8500v2 onwards, this setting loses the previous meaning and instead
+ * indicates if wakeup detection is enabled on the pin.  Note that
+ * enable_irq_wake() will automatically enable wakeup detection.
  */
 int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode)
 {
@@ -367,7 +396,27 @@ static void nmk_gpio_irq_unmask(unsigned int irq)
 
 static int nmk_gpio_irq_set_wake(unsigned int irq, unsigned int on)
 {
-	return nmk_gpio_irq_modify(irq, WAKE, on);
+	struct nmk_gpio_chip *nmk_chip;
+	unsigned long flags;
+	int gpio;
+
+	gpio = NOMADIK_IRQ_TO_GPIO(irq);
+	nmk_chip = get_irq_chip_data(irq);
+	if (!nmk_chip)
+		return -EINVAL;
+
+	spin_lock_irqsave(&nmk_chip->lock, flags);
+#ifdef CONFIG_ARCH_U8500
+	if (cpu_is_u8500v2()) {
+		__nmk_gpio_set_slpm(nmk_chip, gpio,
+				    on ? NMK_GPIO_SLPM_WAKEUP_ENABLE
+				       : NMK_GPIO_SLPM_WAKEUP_DISABLE);
+	}
+#endif
+	__nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, on);
+	spin_unlock_irqrestore(&nmk_chip->lock, flags);
+
+	return 0;
 }
 
 static int nmk_gpio_irq_set_type(unsigned int irq, unsigned int type)
@@ -495,12 +544,8 @@ static void nmk_gpio_set_output(struct gpio_chip *chip, unsigned offset,
 {
 	struct nmk_gpio_chip *nmk_chip =
 		container_of(chip, struct nmk_gpio_chip, chip);
-	u32 bit = 1 << offset;
 
-	if (val)
-		writel(bit, nmk_chip->addr + NMK_GPIO_DATS);
-	else
-		writel(bit, nmk_chip->addr + NMK_GPIO_DATC);
+	__nmk_gpio_set_output(nmk_chip, offset, val);
 }
 
 static int nmk_gpio_make_output(struct gpio_chip *chip, unsigned offset,
@@ -509,8 +554,7 @@ static int nmk_gpio_make_output(struct gpio_chip *chip, unsigned offset,
 	struct nmk_gpio_chip *nmk_chip =
 		container_of(chip, struct nmk_gpio_chip, chip);
 
-	writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRS);
-	nmk_gpio_set_output(chip, offset, val);
+	__nmk_gpio_make_output(nmk_chip, offset, val);
 
 	return 0;
 }
@@ -534,7 +578,7 @@ static struct gpio_chip nmk_gpio_template = {
 	.can_sleep		= 0,
 };
 
-static int __init nmk_gpio_probe(struct platform_device *dev)
+static int __devinit nmk_gpio_probe(struct platform_device *dev)
 {
 	struct nmk_gpio_platform_data *pdata = dev->dev.platform_data;
 	struct nmk_gpio_chip *nmk_chip;
diff --git a/arch/arm/plat-nomadik/include/plat/gpio.h b/arch/arm/plat-nomadik/include/plat/gpio.h
index aba355101f4..67b113d639d 100644
--- a/arch/arm/plat-nomadik/include/plat/gpio.h
+++ b/arch/arm/plat-nomadik/include/plat/gpio.h
@@ -65,7 +65,9 @@ enum nmk_gpio_pull {
 /* Sleep mode */
 enum nmk_gpio_slpm {
 	NMK_GPIO_SLPM_INPUT,
+	NMK_GPIO_SLPM_WAKEUP_ENABLE = NMK_GPIO_SLPM_INPUT,
 	NMK_GPIO_SLPM_NOCHANGE,
+	NMK_GPIO_SLPM_WAKEUP_DISABLE = NMK_GPIO_SLPM_NOCHANGE,
 };
 
 extern int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode);
diff --git a/arch/arm/plat-nomadik/include/plat/pincfg.h b/arch/arm/plat-nomadik/include/plat/pincfg.h
index 7eed11c1038..8c5ae3f2acf 100644
--- a/arch/arm/plat-nomadik/include/plat/pincfg.h
+++ b/arch/arm/plat-nomadik/include/plat/pincfg.h
@@ -19,12 +19,16 @@
  *	bit  9..10 - Alternate Function Selection
  *	bit 11..12 - Pull up/down state
  *	bit     13 - Sleep mode behaviour
+ *	bit     14 - (sleep mode) Direction
+ *	bit     15 - (sleep mode) Value (if output)
  *
  * to facilitate the definition, the following macros are provided
  *
  * PIN_CFG_DEFAULT - default config (0):
  *		     pull up/down = disabled
- *		     sleep mode = input
+ *		     sleep mode = input/wakeup
+ *		     (sleep mode) direction = input
+ *		     (sleep mode) value = low
  *
  * PIN_CFG	   - default config with alternate function
  * PIN_CFG_PULL	   - default config with alternate function and pull up/down
@@ -53,8 +57,36 @@ typedef unsigned long pin_cfg_t;
 #define PIN_SLPM_SHIFT		13
 #define PIN_SLPM_MASK		(0x1 << PIN_SLPM_SHIFT)
 #define PIN_SLPM(x)		(((x) & PIN_SLPM_MASK) >> PIN_SLPM_SHIFT)
-#define PIN_SLPM_INPUT		(NMK_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT)
+#define PIN_SLPM_MAKE_INPUT	(NMK_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT)
 #define PIN_SLPM_NOCHANGE	(NMK_GPIO_SLPM_NOCHANGE << PIN_SLPM_SHIFT)
+/* These two replace the above in DB8500v2+ */
+#define PIN_SLPM_WAKEUP_ENABLE	(NMK_GPIO_SLPM_WAKEUP_ENABLE << PIN_SLPM_SHIFT)
+#define PIN_SLPM_WAKEUP_DISABLE	(NMK_GPIO_SLPM_WAKEUP_DISABLE << PIN_SLPM_SHIFT)
+
+#define PIN_DIR_SHIFT		14
+#define PIN_DIR_MASK		(0x1 << PIN_DIR_SHIFT)
+#define PIN_DIR(x)		(((x) & PIN_DIR_MASK) >> PIN_DIR_SHIFT)
+#define PIN_DIR_INPUT		(0 << PIN_DIR_SHIFT)
+#define PIN_DIR_OUTPUT		(1 << PIN_DIR_SHIFT)
+
+#define PIN_VAL_SHIFT		15
+#define PIN_VAL_MASK		(0x1 << PIN_VAL_SHIFT)
+#define PIN_VAL(x)		(((x) & PIN_VAL_MASK) >> PIN_VAL_SHIFT)
+#define PIN_VAL_LOW		(0 << PIN_VAL_SHIFT)
+#define PIN_VAL_HIGH		(1 << PIN_VAL_SHIFT)
+
+/* Shortcuts.  Use these instead of separate DIR and VAL.  */
+#define PIN_INPUT		PIN_DIR_INPUT
+#define PIN_OUTPUT_LOW		(PIN_DIR_OUTPUT | PIN_VAL_LOW)
+#define PIN_OUTPUT_HIGH		(PIN_DIR_OUTPUT | PIN_VAL_HIGH)
+
+/*
+ * These are the same as the ones above, but should make more sense to the
+ * reader when seen along with a setting a pin to AF mode.
+ */
+#define PIN_SLPM_INPUT		PIN_INPUT
+#define PIN_SLPM_OUTPUT_LOW	PIN_OUTPUT_LOW
+#define PIN_SLPM_OUTPUT_HIGH	PIN_OUTPUT_HIGH
 
 #define PIN_CFG_DEFAULT		(PIN_PULL_NONE | PIN_SLPM_INPUT)
 
diff --git a/arch/arm/plat-omap/include/plat/smp.h b/arch/arm/plat-omap/include/plat/smp.h
index 5177a9c5a25..ecd6a488c49 100644
--- a/arch/arm/plat-omap/include/plat/smp.h
+++ b/arch/arm/plat-omap/include/plat/smp.h
@@ -18,6 +18,7 @@
 #define OMAP_ARCH_SMP_H
 
 #include <asm/hardware/gic.h>
+#include <asm/smp_mpidr.h>
 
 /* Needed for secondary core boot */
 extern void omap_secondary_startup(void);
@@ -33,15 +34,4 @@ static inline void smp_cross_call(const struct cpumask *mask)
 	gic_raise_softirq(mask, 1);
 }
 
-/*
- * Read MPIDR: Multiprocessor affinity register
- */
-#define hard_smp_processor_id()			\
-	({						\
-		unsigned int cpunum;			\
-		__asm__("mrc p15, 0, %0, c0, c0, 5"	\
-			: "=r" (cpunum));		\
-		cpunum &= 0x0F;				\
-	})
-
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h b/arch/arm/plat-pxa/include/plat/pxa27x_keypad.h
index 7b4eadc6df3..abcc36eb124 100644
--- a/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h
+++ b/arch/arm/plat-pxa/include/plat/pxa27x_keypad.h
@@ -25,6 +25,13 @@
  *
  * 4. matrix key and direct key will use the same debounce_interval by
  *    default, which should be sufficient in most cases
+ *
+ * pxa168 keypad platform specific parameter
+ *
+ * NOTE:
+ * clear_wakeup_event callback is a workaround required to clear the
+ * keypad interrupt. The keypad wake must be cleared in addition to
+ * reading the MI/DI bits in the KPC register.
  */
 struct pxa27x_keypad_platform_data {
 
@@ -52,6 +59,9 @@ struct pxa27x_keypad_platform_data {
 
 	/* key debounce interval */
 	unsigned int	debounce_interval;
+
+	/* clear wakeup event requirement for pxa168 */
+	void		(*clear_wakeup_event)(void);
 };
 
 extern void pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info);
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
index c6a855db2fb..25960966af7 100644
--- a/arch/arm/plat-s5p/Kconfig
+++ b/arch/arm/plat-s5p/Kconfig
@@ -7,7 +7,7 @@
 
 config PLAT_S5P
 	bool
-	depends on (ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_S5PV310)
+	depends on (ARCH_S5P64X0 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_S5PV310)
 	default y
 	select ARM_VIC if !ARCH_S5PV310
 	select ARM_GIC if ARCH_S5PV310
@@ -30,7 +30,7 @@ config S5P_EXT_INT
 	bool
 	help
 	  Use the external interrupts (other than GPIO interrupts.)
-	  Note: Do not choose this for S5P6440.
+	  Note: Do not choose this for S5P6440 and S5P6450.
 
 config S5P_DEV_FIMC0
 	bool
@@ -46,3 +46,8 @@ config S5P_DEV_FIMC2
 	bool
 	help
 	  Compile in platform device definitions for FIMC controller 2
+
+config S5P_DEV_ONENAND
+	bool
+	help
+	  Compile in platform device definition for OneNAND controller
diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile
index b2e02967395..f3e917e27da 100644
--- a/arch/arm/plat-s5p/Makefile
+++ b/arch/arm/plat-s5p/Makefile
@@ -24,3 +24,4 @@ obj-$(CONFIG_S5P_EXT_INT)	+= irq-eint.o
 obj-$(CONFIG_S5P_DEV_FIMC0)	+= dev-fimc0.o
 obj-$(CONFIG_S5P_DEV_FIMC1)	+= dev-fimc1.o
 obj-$(CONFIG_S5P_DEV_FIMC2)	+= dev-fimc2.o
+obj-$(CONFIG_S5P_DEV_ONENAND)	+= dev-onenand.o
diff --git a/arch/arm/plat-s5p/clock.c b/arch/arm/plat-s5p/clock.c
index b5e255265f2..8aaf4e6b60c 100644
--- a/arch/arm/plat-s5p/clock.c
+++ b/arch/arm/plat-s5p/clock.c
@@ -74,6 +74,13 @@ struct clk clk_fout_epll = {
 	.ctrlbit	= (1 << 31),
 };
 
+/* DPLL clock output */
+struct clk clk_fout_dpll = {
+	.name		= "fout_dpll",
+	.id		= -1,
+	.ctrlbit	= (1 << 31),
+};
+
 /* VPLL clock output */
 struct clk clk_fout_vpll = {
 	.name		= "fout_vpll",
@@ -122,6 +129,17 @@ struct clksrc_sources clk_src_epll = {
 	.nr_sources	= ARRAY_SIZE(clk_src_epll_list),
 };
 
+/* Possible clock sources for DPLL Mux */
+static struct clk *clk_src_dpll_list[] = {
+	[0] = &clk_fin_dpll,
+	[1] = &clk_fout_dpll,
+};
+
+struct clksrc_sources clk_src_dpll = {
+	.sources	= clk_src_dpll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_dpll_list),
+};
+
 struct clk clk_vpll = {
 	.name		= "vpll",
 	.id		= -1,
@@ -145,6 +163,7 @@ static struct clk *s5p_clks[] __initdata = {
 	&clk_fout_apll,
 	&clk_fout_mpll,
 	&clk_fout_epll,
+	&clk_fout_dpll,
 	&clk_fout_vpll,
 	&clk_arm,
 	&clk_vpll,
diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c
index b07a078fd28..74f7f5a5446 100644
--- a/arch/arm/plat-s5p/cpu.c
+++ b/arch/arm/plat-s5p/cpu.c
@@ -19,6 +19,7 @@
 #include <plat/cpu.h>
 #include <plat/s5p6440.h>
 #include <plat/s5p6442.h>
+#include <plat/s5p6450.h>
 #include <plat/s5pc100.h>
 #include <plat/s5pv210.h>
 #include <plat/s5pv310.h>
@@ -27,6 +28,7 @@
 
 static const char name_s5p6440[] = "S5P6440";
 static const char name_s5p6442[] = "S5P6442";
+static const char name_s5p6450[] = "S5P6450";
 static const char name_s5pc100[] = "S5PC100";
 static const char name_s5pv210[] = "S5PV210/S5PC110";
 static const char name_s5pv310[] = "S5PV310";
@@ -38,7 +40,7 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.map_io		= s5p6440_map_io,
 		.init_clocks	= s5p6440_init_clocks,
 		.init_uarts	= s5p6440_init_uarts,
-		.init		= s5p6440_init,
+		.init		= s5p64x0_init,
 		.name		= name_s5p6440,
 	}, {
 		.idcode		= 0x36442000,
@@ -49,6 +51,14 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.init		= s5p6442_init,
 		.name		= name_s5p6442,
 	}, {
+		.idcode		= 0x36450000,
+		.idmask		= 0xffffff00,
+		.map_io		= s5p6450_map_io,
+		.init_clocks	= s5p6450_init_clocks,
+		.init_uarts	= s5p6450_init_uarts,
+		.init		= s5p64x0_init,
+		.name		= name_s5p6450,
+	}, {
 		.idcode		= 0x43100000,
 		.idmask		= 0xfffff000,
 		.map_io		= s5pc100_map_io,
@@ -89,33 +99,11 @@ static struct map_desc s5p_iodesc[] __initdata = {
 		.length		= SZ_64K,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= (unsigned long)S3C_VA_UART,
-		.pfn		= __phys_to_pfn(S3C_PA_UART),
-		.length		= SZ_512K,
-		.type		= MT_DEVICE,
-#ifdef CONFIG_ARM_VIC
-	}, {
-		.virtual	= (unsigned long)VA_VIC0,
-		.pfn		= __phys_to_pfn(S5P_PA_VIC0),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)VA_VIC1,
-		.pfn		= __phys_to_pfn(S5P_PA_VIC1),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-#endif
-	}, {
 		.virtual	= (unsigned long)S3C_VA_TIMER,
 		.pfn		= __phys_to_pfn(S5P_PA_TIMER),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= (unsigned long)S5P_VA_GPIO,
-		.pfn		= __phys_to_pfn(S5P_PA_GPIO),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
 		.virtual	= (unsigned long)S3C_VA_WATCHDOG,
 		.pfn		= __phys_to_pfn(S3C_PA_WDT),
 		.length		= SZ_4K,
diff --git a/arch/arm/mach-s5pv210/dev-onenand.c b/arch/arm/plat-s5p/dev-onenand.c
index f8ede33ee82..6db926202ca 100644
--- a/arch/arm/mach-s5pv210/dev-onenand.c
+++ b/arch/arm/plat-s5p/dev-onenand.c
@@ -1,10 +1,12 @@
-/*
- * linux/arch/arm/mach-s5pv210/dev-onenand.c
+/* linux/arch/arm/plat-s5p/dev-onenand.c
+ *
+ * Copyright 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
  *
  *  Copyright (c) 2008-2010 Samsung Electronics
  *  Kyungmin Park <kyungmin.park@samsung.com>
  *
- * S5PC110 series device definition for OneNAND devices
+ * S5P series device definition for OneNAND devices
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -19,15 +21,15 @@
 #include <mach/irqs.h>
 #include <mach/map.h>
 
-static struct resource s5pc110_onenand_resources[] = {
+static struct resource s5p_onenand_resources[] = {
 	[0] = {
-		.start	= S5PC110_PA_ONENAND,
-		.end	= S5PC110_PA_ONENAND + SZ_128K - 1,
+		.start	= S5P_PA_ONENAND,
+		.end	= S5P_PA_ONENAND + SZ_128K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= S5PC110_PA_ONENAND_DMA,
-		.end	= S5PC110_PA_ONENAND_DMA + SZ_8K - 1,
+		.start	= S5P_PA_ONENAND_DMA,
+		.end	= S5P_PA_ONENAND_DMA + SZ_8K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[2] = {
@@ -37,19 +39,19 @@ static struct resource s5pc110_onenand_resources[] = {
 	},
 };
 
-struct platform_device s5pc110_device_onenand = {
+struct platform_device s5p_device_onenand = {
 	.name		= "s5pc110-onenand",
 	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s5pc110_onenand_resources),
-	.resource	= s5pc110_onenand_resources,
+	.num_resources	= ARRAY_SIZE(s5p_onenand_resources),
+	.resource	= s5p_onenand_resources,
 };
 
-void s5pc110_onenand_set_platdata(struct onenand_platform_data *pdata)
+void s5p_onenand_set_platdata(struct onenand_platform_data *pdata)
 {
 	struct onenand_platform_data *pd;
 
 	pd = kmemdup(pdata, sizeof(struct onenand_platform_data), GFP_KERNEL);
 	if (!pd)
 		printk(KERN_ERR "%s: no memory for platform data\n", __func__);
-	s5pc110_device_onenand.dev.platform_data = pd;
+	s5p_device_onenand.dev.platform_data = pd;
 }
diff --git a/arch/arm/plat-s5p/dev-uart.c b/arch/arm/plat-s5p/dev-uart.c
index a89331ef4ae..6a734288617 100644
--- a/arch/arm/plat-s5p/dev-uart.c
+++ b/arch/arm/plat-s5p/dev-uart.c
@@ -119,6 +119,56 @@ static struct resource s5p_uart3_resource[] = {
 #endif
 };
 
+static struct resource s5p_uart4_resource[] = {
+#if CONFIG_SERIAL_SAMSUNG_UARTS > 4
+	[0] = {
+		.start	= S5P_PA_UART4,
+		.end	= S5P_PA_UART4 + S5P_SZ_UART,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S5P_UART_RX4,
+		.end	= IRQ_S5P_UART_RX4,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S5P_UART_TX4,
+		.end	= IRQ_S5P_UART_TX4,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start	= IRQ_S5P_UART_ERR4,
+		.end	= IRQ_S5P_UART_ERR4,
+		.flags	= IORESOURCE_IRQ,
+	},
+#endif
+};
+
+static struct resource s5p_uart5_resource[] = {
+#if CONFIG_SERIAL_SAMSUNG_UARTS > 5
+	[0] = {
+		.start	= S5P_PA_UART5,
+		.end	= S5P_PA_UART5 + S5P_SZ_UART,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S5P_UART_RX5,
+		.end	= IRQ_S5P_UART_RX5,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S5P_UART_TX5,
+		.end	= IRQ_S5P_UART_TX5,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start	= IRQ_S5P_UART_ERR5,
+		.end	= IRQ_S5P_UART_ERR5,
+		.flags	= IORESOURCE_IRQ,
+	},
+#endif
+};
+
 struct s3c24xx_uart_resources s5p_uart_resources[] __initdata = {
 	[0] = {
 		.resources	= s5p_uart0_resource,
@@ -136,4 +186,12 @@ struct s3c24xx_uart_resources s5p_uart_resources[] __initdata = {
 		.resources	= s5p_uart3_resource,
 		.nr_resources	= ARRAY_SIZE(s5p_uart3_resource),
 	},
+	[4] = {
+		.resources	= s5p_uart4_resource,
+		.nr_resources	= ARRAY_SIZE(s5p_uart4_resource),
+	},
+	[5] = {
+		.resources	= s5p_uart5_resource,
+		.nr_resources	= ARRAY_SIZE(s5p_uart5_resource),
+	},
 };
diff --git a/arch/arm/plat-s5p/include/plat/pll.h b/arch/arm/plat-s5p/include/plat/pll.h
index 4e8fe08cb70..bf28fadee7a 100644
--- a/arch/arm/plat-s5p/include/plat/pll.h
+++ b/arch/arm/plat-s5p/include/plat/pll.h
@@ -47,6 +47,7 @@ static inline unsigned long s5p_get_pll45xx(unsigned long baseclk, u32 pll_con,
 }
 
 #define PLL46XX_KDIV_MASK	(0xFFFF)
+#define PLL4650C_KDIV_MASK	(0xFFF)
 #define PLL46XX_MDIV_MASK	(0x1FF)
 #define PLL46XX_PDIV_MASK	(0x3F)
 #define PLL46XX_SDIV_MASK	(0x7)
@@ -57,6 +58,7 @@ static inline unsigned long s5p_get_pll45xx(unsigned long baseclk, u32 pll_con,
 enum pll46xx_type_t {
 	pll_4600,
 	pll_4650,
+	pll_4650c,
 };
 
 static inline unsigned long s5p_get_pll46xx(unsigned long baseclk,
@@ -72,6 +74,11 @@ static inline unsigned long s5p_get_pll46xx(unsigned long baseclk,
 	sdiv = (pll_con0 >> PLL46XX_SDIV_SHIFT) & PLL46XX_SDIV_MASK;
 	kdiv = pll_con1 & PLL46XX_KDIV_MASK;
 
+	if (pll_type == pll_4650c)
+		kdiv = pll_con1 & PLL4650C_KDIV_MASK;
+	else
+		kdiv = pll_con1 & PLL46XX_KDIV_MASK;
+
 	tmp = baseclk;
 
 	if (pll_type == pll_4600) {
diff --git a/arch/arm/plat-s5p/include/plat/s5p-clock.h b/arch/arm/plat-s5p/include/plat/s5p-clock.h
index 09418b1101f..17036c89840 100644
--- a/arch/arm/plat-s5p/include/plat/s5p-clock.h
+++ b/arch/arm/plat-s5p/include/plat/s5p-clock.h
@@ -1,7 +1,7 @@
 /* linux/arch/arm/plat-s5p/include/plat/s5p-clock.h
  *
- * Copyright 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
  *
  * Header file for s5p clock support
  *
@@ -20,6 +20,7 @@
 #define clk_fin_apll clk_ext_xtal_mux
 #define clk_fin_mpll clk_ext_xtal_mux
 #define clk_fin_epll clk_ext_xtal_mux
+#define clk_fin_dpll clk_ext_xtal_mux
 #define clk_fin_vpll clk_ext_xtal_mux
 #define clk_fin_hpll clk_ext_xtal_mux
 
@@ -30,6 +31,7 @@ extern struct clk s5p_clk_27m;
 extern struct clk clk_fout_apll;
 extern struct clk clk_fout_mpll;
 extern struct clk clk_fout_epll;
+extern struct clk clk_fout_dpll;
 extern struct clk clk_fout_vpll;
 extern struct clk clk_arm;
 extern struct clk clk_vpll;
@@ -37,8 +39,8 @@ extern struct clk clk_vpll;
 extern struct clksrc_sources clk_src_apll;
 extern struct clksrc_sources clk_src_mpll;
 extern struct clksrc_sources clk_src_epll;
+extern struct clksrc_sources clk_src_dpll;
 
-extern int s5p6440_clk48m_ctrl(struct clk *clk, int enable);
 extern int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable);
 
 #endif /* __ASM_PLAT_S5P_CLOCK_H */
diff --git a/arch/arm/plat-s5p/include/plat/s5p6440.h b/arch/arm/plat-s5p/include/plat/s5p6440.h
index a4cd75afeb3..528585d2caf 100644
--- a/arch/arm/plat-s5p/include/plat/s5p6440.h
+++ b/arch/arm/plat-s5p/include/plat/s5p6440.h
@@ -12,24 +12,23 @@
 
  /* Common init code for S5P6440 related SoCs */
 
-extern void s5p6440_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 extern void s5p6440_register_clocks(void);
 extern void s5p6440_setup_clocks(void);
 
 #ifdef CONFIG_CPU_S5P6440
 
-extern  int s5p6440_init(void);
+extern  int s5p64x0_init(void);
 extern void s5p6440_init_irq(void);
 extern void s5p6440_map_io(void);
 extern void s5p6440_init_clocks(int xtal);
 
-#define s5p6440_init_uarts s5p6440_common_init_uarts
+extern void s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 
 #else
 #define s5p6440_init_clocks NULL
 #define s5p6440_init_uarts NULL
 #define s5p6440_map_io NULL
-#define s5p6440_init NULL
+#define s5p64x0_init NULL
 #endif
 
 /* S5P6440 timer */
diff --git a/arch/arm/plat-s5p/include/plat/s5p6450.h b/arch/arm/plat-s5p/include/plat/s5p6450.h
new file mode 100644
index 00000000000..640a41c26be
--- /dev/null
+++ b/arch/arm/plat-s5p/include/plat/s5p6450.h
@@ -0,0 +1,36 @@
+/* arch/arm/plat-s5p/include/plat/s5p6450.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Header file for s5p6450 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Common init code for S5P6450 related SoCs */
+
+extern void s5p6450_register_clocks(void);
+extern void s5p6450_setup_clocks(void);
+
+#ifdef CONFIG_CPU_S5P6450
+
+extern  int s5p64x0_init(void);
+extern void s5p6450_init_irq(void);
+extern void s5p6450_map_io(void);
+extern void s5p6450_init_clocks(int xtal);
+
+extern void s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+#else
+#define s5p6450_init_clocks NULL
+#define s5p6450_init_uarts NULL
+#define s5p6450_map_io NULL
+#define s5p64x0_init NULL
+#endif
+
+/* S5P6450 timer */
+
+extern struct sys_timer s5p6450_timer;
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index 6412933d6fb..9addb3dfb4b 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -79,7 +79,7 @@ extern struct sysdev_class s3c2442_sysclass;
 extern struct sysdev_class s3c2443_sysclass;
 extern struct sysdev_class s3c6410_sysclass;
 extern struct sysdev_class s3c64xx_sysclass;
-extern struct sysdev_class s5p6440_sysclass;
+extern struct sysdev_class s5p64x0_sysclass;
 extern struct sysdev_class s5p6442_sysclass;
 extern struct sysdev_class s5pv210_sysclass;
 
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
index 85f6f23a510..7d448e13879 100644
--- a/arch/arm/plat-samsung/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -67,13 +67,15 @@ extern struct platform_device s5pv210_device_spi0;
 extern struct platform_device s5pv210_device_spi1;
 extern struct platform_device s5p6440_device_spi0;
 extern struct platform_device s5p6440_device_spi1;
+extern struct platform_device s5p6450_device_spi0;
+extern struct platform_device s5p6450_device_spi1;
 
 extern struct platform_device s3c_device_hwmon;
 
 extern struct platform_device s3c_device_nand;
 extern struct platform_device s3c_device_onenand;
 extern struct platform_device s3c64xx_device_onenand1;
-extern struct platform_device s5pc110_device_onenand;
+extern struct platform_device s5p_device_onenand;
 
 extern struct platform_device s3c_device_usbgadget;
 extern struct platform_device s3c_device_usb_hsotg;
@@ -95,6 +97,9 @@ extern struct platform_device s5p6442_device_spi;
 extern struct platform_device s5p6440_device_pcm;
 extern struct platform_device s5p6440_device_iis;
 
+extern struct platform_device s5p6450_device_iis0;
+extern struct platform_device s5p6450_device_pcm0;
+
 extern struct platform_device s5pc100_device_ac97;
 extern struct platform_device s5pc100_device_pcm0;
 extern struct platform_device s5pc100_device_pcm1;
diff --git a/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h b/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h
index 5fe6721b57f..81074421312 100644
--- a/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h
+++ b/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h
@@ -32,6 +32,12 @@ enum dma_ch {
 	DMACH_UART2_TX,
 	DMACH_UART3_RX,
 	DMACH_UART3_TX,
+	DMACH_UART4_RX,
+	DMACH_UART4_TX,
+	DMACH_UART5_RX,
+	DMACH_UART5_TX,
+	DMACH_USI_RX,
+	DMACH_USI_TX,
 	DMACH_IRDA,
 	DMACH_I2S0_RX,
 	DMACH_I2S0_TX,
@@ -64,6 +70,20 @@ enum dma_ch {
 	DMACH_MSM_REQ2,
 	DMACH_MSM_REQ1,
 	DMACH_MSM_REQ0,
+	DMACH_SLIMBUS0_RX,
+	DMACH_SLIMBUS0_TX,
+	DMACH_SLIMBUS0AUX_RX,
+	DMACH_SLIMBUS0AUX_TX,
+	DMACH_SLIMBUS1_RX,
+	DMACH_SLIMBUS1_TX,
+	DMACH_SLIMBUS2_RX,
+	DMACH_SLIMBUS2_TX,
+	DMACH_SLIMBUS3_RX,
+	DMACH_SLIMBUS3_TX,
+	DMACH_SLIMBUS4_RX,
+	DMACH_SLIMBUS4_TX,
+	DMACH_SLIMBUS5_RX,
+	DMACH_SLIMBUS5_TX,
 	/* END Marker, also used to denote a reserved channel */
 	DMACH_MAX,
 };
diff --git a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
index b226f7405e6..ff1a561b326 100644
--- a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
+++ b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
@@ -68,7 +68,7 @@ struct s3c64xx_spi_info {
 extern void s3c64xx_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
 extern void s5pc100_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
 extern void s5pv210_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
-extern void s5p6440_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
+extern void s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
 extern void s5p6442_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
 
 #endif /* __S3C64XX_PLAT_SPI_H */
diff --git a/arch/arm/plat-spear/include/plat/debug-macro.S b/arch/arm/plat-spear/include/plat/debug-macro.S
index 37fa593884e..e91270e4f64 100644
--- a/arch/arm/plat-spear/include/plat/debug-macro.S
+++ b/arch/arm/plat-spear/include/plat/debug-macro.S
@@ -14,11 +14,9 @@
 #include <linux/amba/serial.h>
 #include <mach/spear.h>
 
-		.macro	addruart, rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1					@ MMU enabled?
-		moveq	\rx, #SPEAR_DBG_UART_BASE		@ Physical base
-		movne	\rx, #VA_SPEAR_DBG_UART_BASE		@ Virtual base
+		.macro	addruart, rp, rv
+		mov	\rp, #SPEAR_DBG_UART_BASE		@ Physical base
+		mov	\rv, #VA_SPEAR_DBG_UART_BASE		@ Virtual base
 		.endm
 
 		.macro	senduart, rd, rx
diff --git a/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S b/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S
index 1b9348bf0e4..d3a0985c968 100644
--- a/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S
+++ b/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S
@@ -16,13 +16,10 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x80000000	@ physical base address
-		addeq	\rx, \rx, #0x00070000
-		movne	\rx, #0xf0000000	@ virtual base
-		addne	\rx, \rx, #0x00070000
+		.macro	addruart, rp, rv
+		mov	\rp,      #0x00070000
+		add	\rv, \rp, #0xf0000000	@ virtual base
+		add	\rp, \rp, #0x80000000	@ physical base
 		.endm
 
 		.macro	senduart,rd,rx
diff --git a/arch/arm/plat-tcc/Kconfig b/arch/arm/plat-tcc/Kconfig
new file mode 100644
index 00000000000..1bf499570f4
--- /dev/null
+++ b/arch/arm/plat-tcc/Kconfig
@@ -0,0 +1,20 @@
+if ARCH_TCC_926
+
+menu "Telechips ARM926-based CPUs"
+
+choice
+	prompt "Telechips CPU type:"
+	default ARCH_TCC8K
+
+config ARCH_TCC8K
+	bool TCC8000
+	select USB_ARCH_HAS_OHCI
+	help
+	  Support for Telechips TCC8000 systems
+
+endchoice
+
+source "arch/arm/mach-tcc8k/Kconfig"
+
+endmenu
+endif
diff --git a/arch/arm/plat-tcc/Makefile b/arch/arm/plat-tcc/Makefile
new file mode 100644
index 00000000000..eceabc869b8
--- /dev/null
+++ b/arch/arm/plat-tcc/Makefile
@@ -0,0 +1,3 @@
+# "Telechips Platform Common Modules"
+
+obj-y := clock.o system.o
diff --git a/arch/arm/plat-tcc/clock.c b/arch/arm/plat-tcc/clock.c
new file mode 100644
index 00000000000..f3ced10d527
--- /dev/null
+++ b/arch/arm/plat-tcc/clock.c
@@ -0,0 +1,179 @@
+/*
+ * Clock framework for Telechips SoCs
+ * Based on arch/arm/plat-mxc/clock.c
+ *
+ * Copyright (C) 2004 - 2005 Nokia corporation
+ * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ * Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com>
+ * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ * Copyright 2010 Hans J. Koch, hjk@linutronix.de
+ *
+ * Licensed under the terms of the GPL v2.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/string.h>
+
+#include <mach/clock.h>
+#include <mach/hardware.h>
+
+static DEFINE_MUTEX(clocks_mutex);
+
+/*-------------------------------------------------------------------------
+ * Standard clock functions defined in include/linux/clk.h
+ *-------------------------------------------------------------------------*/
+
+static void __clk_disable(struct clk *clk)
+{
+	BUG_ON(clk->refcount == 0);
+
+	if (!(--clk->refcount) && clk->disable) {
+		/* Unconditionally disable the clock in hardware */
+		clk->disable(clk);
+		/* recursively disable parents */
+		if (clk->parent)
+			__clk_disable(clk->parent);
+	}
+}
+
+static int __clk_enable(struct clk *clk)
+{
+	int ret = 0;
+
+	if (clk->refcount++ == 0 && clk->enable) {
+		if (clk->parent)
+			ret = __clk_enable(clk->parent);
+		if (ret)
+			return ret;
+		else
+			return clk->enable(clk);
+	}
+
+	return 0;
+}
+
+/* This function increments the reference count on the clock and enables the
+ * clock if not already enabled. The parent clock tree is recursively enabled
+ */
+int clk_enable(struct clk *clk)
+{
+	int ret = 0;
+
+	if (!clk)
+		return -EINVAL;
+
+	mutex_lock(&clocks_mutex);
+	ret = __clk_enable(clk);
+	mutex_unlock(&clocks_mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(clk_enable);
+
+/* This function decrements the reference count on the clock and disables
+ * the clock when reference count is 0. The parent clock tree is
+ * recursively disabled
+ */
+void clk_disable(struct clk *clk)
+{
+	if (!clk)
+		return;
+
+	mutex_lock(&clocks_mutex);
+	__clk_disable(clk);
+	mutex_unlock(&clocks_mutex);
+}
+EXPORT_SYMBOL_GPL(clk_disable);
+
+/* Retrieve the *current* clock rate. If the clock itself
+ * does not provide a special calculation routine, ask
+ * its parent and so on, until one is able to return
+ * a valid clock rate
+ */
+unsigned long clk_get_rate(struct clk *clk)
+{
+	if (!clk)
+		return 0UL;
+
+	if (clk->get_rate)
+		return clk->get_rate(clk);
+
+	return clk_get_rate(clk->parent);
+}
+EXPORT_SYMBOL_GPL(clk_get_rate);
+
+/* Round the requested clock rate to the nearest supported
+ * rate that is less than or equal to the requested rate.
+ * This is dependent on the clock's current parent.
+ */
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	if (!clk)
+		return 0;
+	if (!clk->round_rate)
+		return 0;
+
+	return clk->round_rate(clk, rate);
+}
+EXPORT_SYMBOL_GPL(clk_round_rate);
+
+/* Set the clock to the requested clock rate. The rate must
+ * match a supported rate exactly based on what clk_round_rate returns
+ */
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	int ret = -EINVAL;
+
+	if (!clk)
+		return ret;
+	if (!clk->set_rate || !rate)
+		return ret;
+
+	mutex_lock(&clocks_mutex);
+	ret = clk->set_rate(clk, rate);
+	mutex_unlock(&clocks_mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(clk_set_rate);
+
+/* Set the clock's parent to another clock source */
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	struct clk *old;
+	int ret = -EINVAL;
+
+	if (!clk)
+		return ret;
+	if (!clk->set_parent || !parent)
+		return ret;
+
+	mutex_lock(&clocks_mutex);
+	old = clk->parent;
+	if (clk->refcount)
+		__clk_enable(parent);
+	ret = clk->set_parent(clk, parent);
+	if (ret)
+		old = parent;
+	if (clk->refcount)
+		__clk_disable(old);
+	mutex_unlock(&clocks_mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(clk_set_parent);
+
+/* Retrieve the clock's parent clock source */
+struct clk *clk_get_parent(struct clk *clk)
+{
+	if (!clk)
+		return NULL;
+
+	return clk->parent;
+}
+EXPORT_SYMBOL_GPL(clk_get_parent);
diff --git a/arch/arm/plat-tcc/include/mach/clkdev.h b/arch/arm/plat-tcc/include/mach/clkdev.h
new file mode 100644
index 00000000000..04b37a89801
--- /dev/null
+++ b/arch/arm/plat-tcc/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/plat-tcc/include/mach/clock.h b/arch/arm/plat-tcc/include/mach/clock.h
new file mode 100644
index 00000000000..a12f58ad71a
--- /dev/null
+++ b/arch/arm/plat-tcc/include/mach/clock.h
@@ -0,0 +1,48 @@
+/*
+ * Low level clock header file for Telechips TCC architecture
+ * (C) 2010 Hans J. Koch <hjk@linutronix.de>
+ *
+ * Licensed under the GPL v2.
+ */
+
+#ifndef __ASM_ARCH_TCC_CLOCK_H__
+#define __ASM_ARCH_TCC_CLOCK_H__
+
+#ifndef __ASSEMBLY__
+
+struct clk {
+	struct clk *parent;
+	/* id number of a root clock, 0 for normal clocks */
+	int root_id;
+	/* Reference count of clock enable/disable */
+	int refcount;
+	/* Address of associated BCLKCTRx register. Must be set. */
+	void __iomem *bclkctr;
+	/* Bit position for BCLKCTRx. Must be set. */
+	int bclk_shift;
+	/* Address of ACLKxxx register, if any. */
+	void __iomem *aclkreg;
+	/* get the current clock rate (always a fresh value) */
+	unsigned long (*get_rate) (struct clk *);
+	/* Function ptr to set the clock to a new rate. The rate must match a
+	   supported rate returned from round_rate. Leave blank if clock is not
+	   programmable */
+	int (*set_rate) (struct clk *, unsigned long);
+	/* Function ptr to round the requested clock rate to the nearest
+	   supported rate that is less than or equal to the requested rate. */
+	unsigned long (*round_rate) (struct clk *, unsigned long);
+	/* Function ptr to enable the clock. Leave blank if clock can not
+	   be gated. */
+	int (*enable) (struct clk *);
+	/* Function ptr to disable the clock. Leave blank if clock can not
+	   be gated. */
+	void (*disable) (struct clk *);
+	/* Function ptr to set the parent clock of the clock. */
+	int (*set_parent) (struct clk *, struct clk *);
+};
+
+int clk_register(struct clk *clk);
+void clk_unregister(struct clk *clk);
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_ARCH_MXC_CLOCK_H__ */
diff --git a/arch/arm/plat-tcc/include/mach/debug-macro.S b/arch/arm/plat-tcc/include/mach/debug-macro.S
new file mode 100644
index 00000000000..7662f736e42
--- /dev/null
+++ b/arch/arm/plat-tcc/include/mach/debug-macro.S
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 1994-1999 Russell King
+ * Copyright (C) 2008-2009 Telechips
+ * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+		.macro	addruart, rp, rv
+		moveq	\rp, #0x90000000	@ physical base address
+		movne	\rv, #0xF1000000	@ virtual base
+		orr	\rp, \rp, #0x00007000	@ UART0
+		orr	\rv, \rv, #0x00007000	@ UART0
+		.endm
+
+		.macro	senduart,rd,rx
+		strb	\rd, [\rx, #0x44]
+		.endm
+
+		.macro	waituart,rd,rx
+		.endm
+
+		.macro	busyuart,rd,rx
+1001:
+		ldr \rd, [\rx, #0x14]
+		tst \rd, #0x20
+
+		beq 1001b
+		.endm
diff --git a/arch/arm/plat-tcc/include/mach/entry-macro.S b/arch/arm/plat-tcc/include/mach/entry-macro.S
new file mode 100644
index 00000000000..748f401e4b6
--- /dev/null
+++ b/arch/arm/plat-tcc/include/mach/entry-macro.S
@@ -0,0 +1,68 @@
+/*
+ * include/asm-arm/arch-tcc83x/entry-macro.S
+ *
+ * Author : <linux@telechips.com>
+ * Created: June 10, 2008
+ * Description: Low-level IRQ helper macros for Telechips-based platforms
+ *
+ * Copyright (C) 2008-2009 Telechips
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+		ldr	\base, =0xF2003000 @ base address of PIC registers
+
+		@@ read MREQ register of PIC0
+
+		mov	\irqnr, #0
+		ldr	\irqstat, [\base, #0x00000014 ]	@ lower 32 interrupts
+		cmp	\irqstat, #0
+		bne	1001f
+
+		@@ read MREQ register of PIC1
+
+		ldr	\irqstat, [\base, #0x00000094]	@ upper 32 interrupts
+		cmp	\irqstat, #0
+		beq	1002f
+		mov	\irqnr, #0x20
+
+1001:
+		movs	\tmp, \irqstat, lsl #16
+		movne	\irqstat, \tmp
+		addeq	\irqnr, \irqnr, #16
+
+		movs	\tmp, \irqstat, lsl #8
+		movne	\irqstat, \tmp
+		addeq	\irqnr, \irqnr, #8
+
+		movs	\tmp, \irqstat, lsl #4
+		movne	\irqstat, \tmp
+		addeq	\irqnr, \irqnr, #4
+
+		movs	\tmp, \irqstat, lsl #2
+		movne	\irqstat, \tmp
+		addeq	\irqnr, \irqnr, #2
+
+		movs	\tmp, \irqstat, lsl #1
+		addeq	\irqnr, \irqnr, #1
+		orrs	\base, \base, #1
+1002:
+		@@ exit here, Z flag unset if IRQ
+
+	.endm
diff --git a/arch/arm/plat-tcc/include/mach/hardware.h b/arch/arm/plat-tcc/include/mach/hardware.h
new file mode 100644
index 00000000000..e70d126ccaf
--- /dev/null
+++ b/arch/arm/plat-tcc/include/mach/hardware.h
@@ -0,0 +1,43 @@
+/*
+ * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
+ * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com>
+ *                          and Dirk Behme <dirk.behme@de.bosch.com>
+ * Rewritten by:    <linux@telechips.com>
+ * Description: Hardware definitions for TCC8300 processors and boards
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Copyright (C) 2008-2009 Telechips
+ *
+ * Modifications for mainline (C) 2009 Hans J. Koch <hjk@linutronix.de>
+ *
+ * Licensed under the terms of the GNU Pulic License version 2.
+ */
+
+#ifndef __ASM_ARCH_TCC_HARDWARE_H
+#define __ASM_ARCH_TCC_HARDWARE_H
+
+#include <asm/sizes.h>
+#ifndef __ASSEMBLER__
+#include <asm/types.h>
+#endif
+#include <mach/io.h>
+
+/*
+ * ----------------------------------------------------------------------------
+ * Clocks
+ * ----------------------------------------------------------------------------
+ */
+#define CLKGEN_REG_BASE		0xfffece00
+#define ARM_CKCTL		(CLKGEN_REG_BASE + 0x0)
+#define ARM_IDLECT1		(CLKGEN_REG_BASE + 0x4)
+#define ARM_IDLECT2		(CLKGEN_REG_BASE + 0x8)
+#define ARM_EWUPCT		(CLKGEN_REG_BASE + 0xC)
+#define ARM_RSTCT1		(CLKGEN_REG_BASE + 0x10)
+#define ARM_RSTCT2		(CLKGEN_REG_BASE + 0x14)
+#define ARM_SYSST		(CLKGEN_REG_BASE + 0x18)
+#define ARM_IDLECT3		(CLKGEN_REG_BASE + 0x24)
+
+/* DPLL control registers */
+#define DPLL_CTL		0xfffecf00
+
+#endif	/* __ASM_ARCH_TCC_HARDWARE_H */
diff --git a/arch/arm/plat-tcc/include/mach/io.h b/arch/arm/plat-tcc/include/mach/io.h
new file mode 100644
index 00000000000..3e911d3ea0f
--- /dev/null
+++ b/arch/arm/plat-tcc/include/mach/io.h
@@ -0,0 +1,23 @@
+/*
+ * IO definitions for TCC8000 processors and boards
+ *
+ * Copyright (C) 1997-1999 Russell King
+ * Copyright (C) 2008-2009 Telechips
+ * Copyright (C) 2010 Hans J. Koch <hjk@linutronix.de>
+ *
+ * Licensed under the terms of the GNU Public License version 2.
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a)			__typesafe_io(a)
+#define __mem_pci(a)		(a)
+
+#endif
diff --git a/arch/arm/plat-tcc/include/mach/irqs.h b/arch/arm/plat-tcc/include/mach/irqs.h
new file mode 100644
index 00000000000..da863894d49
--- /dev/null
+++ b/arch/arm/plat-tcc/include/mach/irqs.h
@@ -0,0 +1,83 @@
+/*
+ * IRQ definitions for TCC8xxx
+ *
+ * Copyright (C) 2008-2009 Telechips
+ * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de>
+ *
+ * Licensed under the terms of the GPL v2.
+ *
+ */
+
+#ifndef __ASM_ARCH_TCC_IRQS_H
+#define __ASM_ARCH_TCC_IRQS_H
+
+#define NR_IRQS 64
+
+/* PIC0 interrupts */
+#define INT_ADMA1	0
+#define INT_BDMA	1
+#define INT_ADMA0	2
+#define INT_GDMA1	3
+#define INT_I2S0RX	4
+#define INT_I2S0TX	5
+#define INT_TC		6
+#define INT_UART0	7
+#define INT_USBD	8
+#define INT_SPI0TX	9
+#define INT_UDMA	10
+#define INT_LIRQ	11
+#define INT_GDMA2	12
+#define INT_GDMA0	13
+#define INT_TC32	14
+#define INT_LCD		15
+#define INT_ADC		16
+#define INT_I2C		17
+#define INT_RTCP	18
+#define INT_RTCA	19
+#define INT_NFC		20
+#define INT_SD0		21
+#define INT_GSB0	22
+#define INT_PK		23
+#define INT_USBH0	24
+#define INT_USBH1	25
+#define INT_G2D		26
+#define INT_ECC		27
+#define INT_SPI0RX	28
+#define INT_UART1	29
+#define INT_MSCL	30
+#define INT_GSB1	31
+/* PIC1 interrupts */
+#define INT_E0		32
+#define INT_E1		33
+#define INT_E2		34
+#define INT_E3		35
+#define INT_E4		36
+#define INT_E5		37
+#define INT_E6		38
+#define INT_E7		39
+#define INT_UART2	40
+#define INT_UART3	41
+#define INT_SPI1TX	42
+#define INT_SPI1RX	43
+#define INT_GSB2	44
+#define INT_SPDIF	45
+#define INT_CDIF	46
+#define INT_VBON	47
+#define INT_VBOFF	48
+#define INT_SD1		49
+#define INT_UART4	50
+#define INT_GDMA3	51
+#define INT_I2S1RX	52
+#define INT_I2S1TX	53
+#define INT_CAN0	54
+#define INT_CAN1	55
+#define INT_GSB3	56
+#define INT_KRST	57
+#define INT_UNUSED	58
+#define INT_SD0D3	59
+#define INT_SD1D3	60
+#define INT_GPS0	61
+#define INT_GPS1	62
+#define INT_GPS2	63
+
+#endif  /* ASM_ARCH_TCC_IRQS_H */
diff --git a/arch/arm/plat-tcc/include/mach/memory.h b/arch/arm/plat-tcc/include/mach/memory.h
new file mode 100644
index 00000000000..cd91ba8a670
--- /dev/null
+++ b/arch/arm/plat-tcc/include/mach/memory.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (C) 1999 ARM Limited
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Copyright (C) 2008-2009 Telechips
+ * Copyright (C) 2010 Hans J. Koch <hjk@linutronix.de>
+ *
+ * Licensed under the terms of the GPL v2.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET		UL(0x20000000)
+
+#endif
diff --git a/arch/arm/plat-tcc/include/mach/system.h b/arch/arm/plat-tcc/include/mach/system.h
new file mode 100644
index 00000000000..909e6035d84
--- /dev/null
+++ b/arch/arm/plat-tcc/include/mach/system.h
@@ -0,0 +1,31 @@
+/*
+ * Author: <linux@telechips.com>
+ * Created: June 10, 2008
+ * Description: LINUX SYSTEM FUNCTIONS for TCC83x
+ *
+ * Copyright (C) 2008-2009 Telechips
+ *
+ * Licensed under the terms of the GPL v2.
+ *
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+#include <linux/clk.h>
+
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+
+extern void plat_tcc_reboot(void);
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+	plat_tcc_reboot();
+}
+
+#endif
diff --git a/arch/arm/plat-tcc/include/mach/tcc8k-regs.h b/arch/arm/plat-tcc/include/mach/tcc8k-regs.h
new file mode 100644
index 00000000000..1d942829533
--- /dev/null
+++ b/arch/arm/plat-tcc/include/mach/tcc8k-regs.h
@@ -0,0 +1,807 @@
+/*
+ * Telechips TCC8000 register definitions
+ *
+ * (C) 2009 Hans J. Koch <hjk@linutronix.de>
+ *
+ * Licensed under the terms of the GPLv2.
+ */
+
+#ifndef TCC8K_REGS_H
+#define TCC8K_REGS_H
+
+#include <linux/types.h>
+
+#define EXT_SDRAM_BASE		0x20000000
+#define INT_SRAM_BASE		0x30000000
+#define INT_SRAM_SIZE		SZ_32K
+#define CS0_BASE		0x40000000
+#define CS1_BASE		0x50000000
+#define CS1_SIZE		SZ_64K
+#define CS2_BASE		0x60000000
+#define CS3_BASE		0x70000000
+#define AHB_PERI_BASE		0x80000000
+#define AHB_PERI_SIZE		SZ_64K
+#define APB0_PERI_BASE		0x90000000
+#define APB0_PERI_SIZE		SZ_128K
+#define APB1_PERI_BASE		0x98000000
+#define APB1_PERI_SIZE		SZ_128K
+#define DATA_TCM_BASE		0xa0000000
+#define DATA_TCM_SIZE		SZ_8K
+#define EXT_MEM_CTRL_BASE	0xf0000000
+#define EXT_MEM_CTRL_SIZE	SZ_4K
+
+#define CS1_BASE_VIRT		(void __iomem *)0xf7000000
+#define AHB_PERI_BASE_VIRT	(void __iomem *)0xf4000000
+#define APB0_PERI_BASE_VIRT	(void __iomem *)0xf1000000
+#define APB1_PERI_BASE_VIRT	(void __iomem *)0xf2000000
+#define EXT_MEM_CTRL_BASE_VIRT	(void __iomem *)0xf3000000
+#define INT_SRAM_BASE_VIRT	(void __iomem *)0xf5000000
+#define DATA_TCM_BASE_VIRT	(void __iomem *)0xf6000000
+
+#define __REG(x)     (*((volatile u32 *)(x)))
+
+/* USB Device Controller Registers */
+#define UDC_BASE	(AHB_PERI_BASE_VIRT + 0x8000)
+#define UDC_BASE_PHYS	(AHB_PERI_BASE + 0x8000)
+
+#define UDC_IR_OFFS		0x00
+#define UDC_EIR_OFFS		0x04
+#define UDC_EIER_OFFS		0x08
+#define UDC_FAR_OFFS		0x0c
+#define UDC_FNR_OFFS		0x10
+#define UDC_EDR_OFFS		0x14
+#define UDC_RT_OFFS		0x18
+#define UDC_SSR_OFFS		0x1c
+#define UDC_SCR_OFFS		0x20
+#define UDC_EP0SR_OFFS		0x24
+#define UDC_EP0CR_OFFS		0x28
+
+#define UDC_ESR_OFFS		0x2c
+#define UDC_ECR_OFFS		0x30
+#define UDC_BRCR_OFFS		0x34
+#define UDC_BWCR_OFFS		0x38
+#define UDC_MPR_OFFS		0x3c
+#define UDC_DCR_OFFS		0x40
+#define UDC_DTCR_OFFS		0x44
+#define UDC_DFCR_OFFS		0x48
+#define UDC_DTTCR1_OFFS		0x4c
+#define UDC_DTTCR2_OFFS		0x50
+#define UDC_ESR2_OFFS		0x54
+
+#define UDC_SCR2_OFFS		0x58
+#define UDC_EP0BUF_OFFS		0x60
+#define UDC_EP1BUF_OFFS		0x64
+#define UDC_EP2BUF_OFFS		0x68
+#define UDC_EP3BUF_OFFS		0x6c
+#define UDC_PLICR_OFFS		0xa0
+#define UDC_PCR_OFFS		0xa4
+
+#define UDC_UPCR0_OFFS		0xc8
+#define UDC_UPCR1_OFFS		0xcc
+#define UDC_UPCR2_OFFS		0xd0
+#define UDC_UPCR3_OFFS		0xd4
+
+/* Bits in UDC_EIR */
+#define UDC_EIR_EP0I		(1 << 0)
+#define UDC_EIR_EP1I		(1 << 1)
+#define UDC_EIR_EP2I		(1 << 2)
+#define UDC_EIR_EP3I		(1 << 3)
+#define UDC_EIR_EPI_MASK	0x0f
+
+/* Bits in UDC_EIER */
+#define UDC_EIER_EP0IE		(1 << 0)
+#define UDC_EIER_EP1IE		(1 << 1)
+#define UDC_EIER_EP2IE		(1 << 2)
+#define UDC_EIER_EP3IE		(1 << 3)
+
+/* Bits in UDC_FNR */
+#define UDC_FNR_FN_MASK		0x7ff
+#define UDC_FNR_SM		(1 << 13)
+#define UDC_FNR_FTL		(1 << 14)
+
+/* Bits in UDC_SSR */
+#define UDC_SSR_HFRES		(1 << 0)
+#define UDC_SSR_HFSUSP		(1 << 1)
+#define UDC_SSR_HFRM		(1 << 2)
+#define UDC_SSR_SDE		(1 << 3)
+#define UDC_SSR_HSP		(1 << 4)
+#define UDC_SSR_DM		(1 << 5)
+#define UDC_SSR_DP		(1 << 6)
+#define UDC_SSR_TBM		(1 << 7)
+#define UDC_SSR_VBON		(1 << 8)
+#define UDC_SSR_VBOFF		(1 << 9)
+#define UDC_SSR_EOERR		(1 << 10)
+#define UDC_SSR_DCERR		(1 << 11)
+#define UDC_SSR_TCERR		(1 << 12)
+#define UDC_SSR_BSERR		(1 << 13)
+#define UDC_SSR_TMERR		(1 << 14)
+#define UDC_SSR_BAERR		(1 << 15)
+
+/* Bits in UDC_SCR */
+#define UDC_SCR_HRESE		(1 << 0)
+#define UDC_SCR_HSSPE		(1 << 1)
+#define UDC_SCR_RRDE		(1 << 5)
+#define UDC_SCR_SPDEN		(1 << 6)
+#define UDC_SCR_DIEN		(1 << 12)
+
+/* Bits in UDC_EP0SR */
+#define UDC_EP0SR_RSR		(1 << 0)
+#define UDC_EP0SR_TST		(1 << 1)
+#define UDC_EP0SR_SHT		(1 << 4)
+#define UDC_EP0SR_LWO		(1 << 6)
+
+/* Bits in UDC_EP0CR */
+#define UDC_EP0CR_ESS		(1 << 1)
+
+/* Bits in UDC_ESR */
+#define UDC_ESR_RPS		(1 << 0)
+#define UDC_ESR_TPS		(1 << 1)
+#define UDC_ESR_LWO		(1 << 4)
+#define UDC_ESR_FFS		(1 << 6)
+
+/* Bits in UDC_ECR */
+#define UDC_ECR_ESS		(1 << 1)
+#define UDC_ECR_CDP		(1 << 2)
+
+#define UDC_ECR_FLUSH		(1 << 6)
+#define UDC_ECR_DUEN		(1 << 7)
+
+/* Bits in UDC_UPCR0 */
+#define UDC_UPCR0_VBD		(1 << 1)
+#define UDC_UPCR0_VBDS		(1 << 6)
+#define UDC_UPCR0_RCD_12	(0x0 << 9)
+#define UDC_UPCR0_RCD_24	(0x1 << 9)
+#define UDC_UPCR0_RCD_48	(0x2 << 9)
+#define UDC_UPCR0_RCS_EXT	(0x1 << 11)
+#define UDC_UPCR0_RCS_XTAL	(0x0 << 11)
+
+/* Bits in UDC_UPCR1 */
+#define UDC_UPCR1_CDT(x)	((x) << 0)
+#define UDC_UPCR1_OTGT(x)	((x) << 3)
+#define UDC_UPCR1_SQRXT(x)	((x) << 8)
+#define UDC_UPCR1_TXFSLST(x)	((x) << 12)
+
+/* Bits in UDC_UPCR2 */
+#define UDC_UPCR2_TP		(1 << 0)
+#define UDC_UPCR2_TXRT(x)	((x) << 2)
+#define UDC_UPCR2_TXVRT(x)	((x) << 5)
+#define UDC_UPCR2_OPMODE(x)	((x) << 9)
+#define UDC_UPCR2_XCVRSEL(x)	((x) << 12)
+#define UDC_UPCR2_TM		(1 << 14)
+
+/* USB Host Controller registers */
+#define USBH0_BASE	(AHB_PERI_BASE_VIRT + 0xb000)
+#define USBH1_BASE	(AHB_PERI_BASE_VIRT + 0xb800)
+
+#define OHCI_INT_ENABLE_OFFS	0x10
+
+#define RH_DESCRIPTOR_A_OFFS	0x48
+#define RH_DESCRIPTOR_B_OFFS	0x4c
+
+#define USBHTCFG0_OFFS		0x100
+#define USBHHCFG0_OFFS		0x104
+#define USBHHCFG1_OFFS		0x104
+
+/* DMA controller registers */
+#define DMAC0_BASE	(AHB_PERI_BASE + 0x4000)
+#define DMAC1_BASE	(AHB_PERI_BASE + 0xa000)
+#define DMAC2_BASE	(AHB_PERI_BASE + 0x4800)
+#define DMAC3_BASE	(AHB_PERI_BASE + 0xa800)
+
+#define DMAC_CH_OFFSET(ch)	(ch * 0x30)
+
+#define ST_SADR_OFFS		0x00
+#define SPARAM_OFFS		0x04
+#define C_SADR_OFFS		0x0c
+#define ST_DADR_OFFS		0x10
+#define DPARAM_OFFS		0x14
+#define C_DADR_OFFS		0x1c
+#define HCOUNT_OFFS		0x20
+#define CHCTRL_OFFS		0x24
+#define RPTCTRL_OFFS		0x28
+#define EXTREQ_A_OFFS		0x2c
+
+/* Bits in CHCTRL register */
+#define CHCTRL_EN		(1 << 0)
+
+#define CHCTRL_IEN		(1 << 2)
+#define CHCTRL_FLAG		(1 << 3)
+#define CHCTRL_WSIZE8		(0 << 4)
+#define CHCTRL_WSIZE16		(1 << 4)
+#define CHCTRL_WSIZE32		(2 << 4)
+
+#define CHCTRL_BSIZE1		(0 << 6)
+#define CHCTRL_BSIZE2		(1 << 6)
+#define CHCTRL_BSIZE4		(2 << 6)
+#define CHCTRL_BSIZE8		(3 << 6)
+
+#define CHCTRL_TYPE_SINGLE_E	(0 << 8)
+#define CHCTRL_TYPE_HW		(1 << 8)
+#define CHCTRL_TYPE_SW		(2 << 8)
+#define CHCTRL_TYPE_SINGLE_L	(3 << 8)
+
+#define CHCTRL_BST		(1 << 10)
+
+/* Use DMA controller 0, channel 2 for USB */
+#define USB_DMA_BASE		(DMAC0_BASE + DMAC_CH_OFFSET(2))
+
+/* NAND flash controller registers */
+#define NFC_BASE	(AHB_PERI_BASE_VIRT + 0xd000)
+#define NFC_BASE_PHYS	(AHB_PERI_BASE + 0xd000)
+
+#define NFC_CMD_OFFS		0x00
+#define NFC_LADDR_OFFS		0x04
+#define NFC_BADDR_OFFS		0x08
+#define NFC_SADDR_OFFS		0x0c
+#define NFC_WDATA_OFFS		0x10
+#define NFC_LDATA_OFFS		0x20
+#define NFC_SDATA_OFFS		0x40
+#define NFC_CTRL_OFFS		0x50
+#define NFC_PSTART_OFFS		0x54
+#define NFC_RSTART_OFFS		0x58
+#define NFC_DSIZE_OFFS		0x5c
+#define NFC_IREQ_OFFS		0x60
+#define NFC_RST_OFFS		0x64
+#define NFC_CTRL1_OFFS		0x68
+#define NFC_MDATA_OFFS		0x70
+
+#define NFC_WDATA_PHYS_ADDR	(NFC_BASE_PHYS + NFC_WDATA_OFFS)
+
+/* Bits in NFC_CTRL */
+#define NFC_CTRL_BHLD_MASK	(0xf << 0)
+#define NFC_CTRL_BPW_MASK	(0xf << 4)
+#define NFC_CTRL_BSTP_MASK	(0xf << 8)
+#define NFC_CTRL_CADDR_MASK	(0x7 << 12)
+#define NFC_CTRL_CADDR_1	(0x0 << 12)
+#define NFC_CTRL_CADDR_2	(0x1 << 12)
+#define NFC_CTRL_CADDR_3	(0x2 << 12)
+#define NFC_CTRL_CADDR_4	(0x3 << 12)
+#define NFC_CTRL_CADDR_5	(0x4 << 12)
+#define NFC_CTRL_MSK		(1 << 15)
+#define NFC_CTRL_PSIZE256	(0 << 16)
+#define NFC_CTRL_PSIZE512	(1 << 16)
+#define NFC_CTRL_PSIZE1024	(2 << 16)
+#define NFC_CTRL_PSIZE2048	(3 << 16)
+#define NFC_CTRL_PSIZE4096	(4 << 16)
+#define NFC_CTRL_PSIZE_MASK	(7 << 16)
+#define NFC_CTRL_BSIZE1		(0 << 19)
+#define NFC_CTRL_BSIZE2		(1 << 19)
+#define NFC_CTRL_BSIZE4		(2 << 19)
+#define NFC_CTRL_BSIZE8		(3 << 19)
+#define NFC_CTRL_BSIZE_MASK	(3 << 19)
+#define NFC_CTRL_RDY		(1 << 21)
+#define NFC_CTRL_CS0SEL		(1 << 22)
+#define NFC_CTRL_CS1SEL		(1 << 23)
+#define NFC_CTRL_CS2SEL		(1 << 24)
+#define NFC_CTRL_CS3SEL		(1 << 25)
+#define NFC_CTRL_CSMASK		(0xf << 22)
+#define NFC_CTRL_BW		(1 << 26)
+#define NFC_CTRL_FS		(1 << 27)
+#define NFC_CTRL_DEN		(1 << 28)
+#define NFC_CTRL_READ_IEN	(1 << 29)
+#define NFC_CTRL_PROG_IEN	(1 << 30)
+#define NFC_CTRL_RDY_IEN	(1 << 31)
+
+/* Bits in NFC_IREQ */
+#define NFC_IREQ_IRQ0		(1 << 0)
+#define NFC_IREQ_IRQ1		(1 << 1)
+#define NFC_IREQ_IRQ2		(1 << 2)
+
+#define NFC_IREQ_FLAG0		(1 << 4)
+#define NFC_IREQ_FLAG1		(1 << 5)
+#define NFC_IREQ_FLAG2		(1 << 6)
+
+/* MMC controller registers */
+#define MMC0_BASE	(AHB_PERI_BASE_VIRT + 0xe000)
+#define MMC1_BASE	(AHB_PERI_BASE_VIRT + 0xe800)
+
+/* UART base addresses */
+
+#define UART0_BASE	(APB0_PERI_BASE_VIRT + 0x07000)
+#define UART0_BASE_PHYS	(APB0_PERI_BASE + 0x07000)
+#define UART1_BASE	(APB0_PERI_BASE_VIRT + 0x08000)
+#define UART1_BASE_PHYS	(APB0_PERI_BASE + 0x08000)
+#define UART2_BASE	(APB0_PERI_BASE_VIRT + 0x09000)
+#define UART2_BASE_PHYS	(APB0_PERI_BASE + 0x09000)
+#define UART3_BASE	(APB0_PERI_BASE_VIRT + 0x0a000)
+#define UART3_BASE_PHYS	(APB0_PERI_BASE + 0x0a000)
+#define UART4_BASE	(APB0_PERI_BASE_VIRT + 0x15000)
+#define UART4_BASE_PHYS	(APB0_PERI_BASE + 0x15000)
+
+#define UART_BASE	UART0_BASE
+#define UART_BASE_PHYS	UART0_BASE_PHYS
+
+/* ECC controller */
+#define ECC_CTR_BASE	(APB0_PERI_BASE_VIRT + 0xd000)
+
+#define ECC_CTRL_OFFS		0x00
+#define ECC_BASE_OFFS		0x04
+#define ECC_MASK_OFFS		0x08
+#define ECC_CLEAR_OFFS		0x0c
+#define ECC4_0_OFFS		0x10
+#define ECC4_1_OFFS		0x14
+
+#define ECC_EADDR0_OFFS		0x50
+
+#define ECC_ERRNUM_OFFS		0x90
+#define ECC_IREQ_OFFS		0x94
+
+/* Bits in ECC_CTRL */
+#define ECC_CTRL_ECC4_DIEN	(1 << 28)
+#define ECC_CTRL_ECC8_DIEN	(1 << 29)
+#define ECC_CTRL_ECC12_DIEN	(1 << 30)
+#define ECC_CTRL_ECC_DISABLE	0x0
+#define ECC_CTRL_ECC_SLC_ENC	0x8
+#define ECC_CTRL_ECC_SLC_DEC	0x9
+#define ECC_CTRL_ECC4_ENC	0xa
+#define ECC_CTRL_ECC4_DEC	0xb
+#define ECC_CTRL_ECC8_ENC	0xc
+#define ECC_CTRL_ECC8_DEC	0xd
+#define ECC_CTRL_ECC12_ENC	0xe
+#define ECC_CTRL_ECC12_DEC	0xf
+
+/* Bits in ECC_IREQ */
+#define ECC_IREQ_E4DI		(1 << 4)
+
+#define ECC_IREQ_E4DF		(1 << 20)
+#define ECC_IREQ_E4EF		(1 << 21)
+
+/* Interrupt controller */
+
+#define PIC0_BASE	(APB1_PERI_BASE_VIRT + 0x3000)
+#define PIC0_BASE_PHYS	(APB1_PERI_BASE + 0x3000)
+
+#define PIC0_IEN_OFFS		0x00
+#define PIC0_CREQ_OFFS		0x04
+#define PIC0_IREQ_OFFS		0x08
+#define PIC0_IRQSEL_OFFS	0x0c
+#define PIC0_SRC_OFFS		0x10
+#define PIC0_MREQ_OFFS		0x14
+#define PIC0_TSTREQ_OFFS	0x18
+#define PIC0_POL_OFFS		0x1c
+#define PIC0_IRQ_OFFS		0x20
+#define PIC0_FIQ_OFFS		0x24
+#define PIC0_MIRQ_OFFS		0x28
+#define PIC0_MFIQ_OFFS		0x2c
+#define PIC0_TMODE_OFFS		0x30
+#define PIC0_SYNC_OFFS		0x34
+#define PIC0_WKUP_OFFS		0x38
+#define PIC0_TMODEA_OFFS	0x3c
+#define PIC0_INTOEN_OFFS	0x40
+#define PIC0_MEN0_OFFS		0x44
+#define PIC0_MEN_OFFS		0x48
+
+#define PIC0_IEN		__REG(PIC0_BASE + PIC0_IEN_OFFS)
+#define PIC0_IEN_PHYS		__REG(PIC0_BASE_PHYS + PIC0_IEN_OFFS)
+#define PIC0_CREQ		__REG(PIC0_BASE + PIC0_CREQ_OFFS)
+#define PIC0_CREQ_PHYS		__REG(PIC0_BASE_PHYS + PIC0_CREQ_OFFS)
+#define PIC0_IREQ		__REG(PIC0_BASE + PIC0_IREQ_OFFS)
+#define PIC0_IRQSEL		__REG(PIC0_BASE + PIC0_IRQSEL_OFFS)
+#define PIC0_IRQSEL_PHYS	__REG(PIC0_BASE_PHYS + PIC0_IRQSEL_OFFS)
+#define PIC0_SRC		__REG(PIC0_BASE + PIC0_SRC_OFFS)
+#define PIC0_MREQ		__REG(PIC0_BASE + PIC0_MREQ_OFFS)
+#define PIC0_TSTREQ		__REG(PIC0_BASE + PIC0_TSTREQ_OFFS)
+#define PIC0_POL		__REG(PIC0_BASE + PIC0_POL_OFFS)
+#define PIC0_IRQ		__REG(PIC0_BASE + PIC0_IRQ_OFFS)
+#define PIC0_FIQ		__REG(PIC0_BASE + PIC0_FIQ_OFFS)
+#define PIC0_MIRQ		__REG(PIC0_BASE + PIC0_MIRQ_OFFS)
+#define PIC0_MFIQ		__REG(PIC0_BASE + PIC0_MFIQ_OFFS)
+#define PIC0_TMODE		__REG(PIC0_BASE + PIC0_TMODE_OFFS)
+#define PIC0_TMODE_PHYS		__REG(PIC0_BASE_PHYS + PIC0_TMODE_OFFS)
+#define PIC0_SYNC		__REG(PIC0_BASE + PIC0_SYNC_OFFS)
+#define PIC0_WKUP		__REG(PIC0_BASE + PIC0_WKUP_OFFS)
+#define PIC0_TMODEA		__REG(PIC0_BASE + PIC0_TMODEA_OFFS)
+#define PIC0_INTOEN		__REG(PIC0_BASE + PIC0_INTOEN_OFFS)
+#define PIC0_MEN0		__REG(PIC0_BASE + PIC0_MEN0_OFFS)
+#define PIC0_MEN		__REG(PIC0_BASE + PIC0_MEN_OFFS)
+
+#define PIC1_BASE	(APB1_PERI_BASE_VIRT + 0x3080)
+
+#define PIC1_IEN_OFFS		0x00
+#define PIC1_CREQ_OFFS		0x04
+#define PIC1_IREQ_OFFS		0x08
+#define PIC1_IRQSEL_OFFS	0x0c
+#define PIC1_SRC_OFFS		0x10
+#define PIC1_MREQ_OFFS		0x14
+#define PIC1_TSTREQ_OFFS	0x18
+#define PIC1_POL_OFFS		0x1c
+#define PIC1_IRQ_OFFS		0x20
+#define PIC1_FIQ_OFFS		0x24
+#define PIC1_MIRQ_OFFS		0x28
+#define PIC1_MFIQ_OFFS		0x2c
+#define PIC1_TMODE_OFFS		0x30
+#define PIC1_SYNC_OFFS		0x34
+#define PIC1_WKUP_OFFS		0x38
+#define PIC1_TMODEA_OFFS	0x3c
+#define PIC1_INTOEN_OFFS	0x40
+#define PIC1_MEN1_OFFS		0x44
+#define PIC1_MEN_OFFS		0x48
+
+#define PIC1_IEN	__REG(PIC1_BASE + PIC1_IEN_OFFS)
+#define PIC1_CREQ	__REG(PIC1_BASE + PIC1_CREQ_OFFS)
+#define PIC1_IREQ	__REG(PIC1_BASE + PIC1_IREQ_OFFS)
+#define PIC1_IRQSEL	__REG(PIC1_BASE + PIC1_IRQSEL_OFFS)
+#define PIC1_SRC	__REG(PIC1_BASE + PIC1_SRC_OFFS)
+#define PIC1_MREQ	__REG(PIC1_BASE + PIC1_MREQ_OFFS)
+#define PIC1_TSTREQ	__REG(PIC1_BASE + PIC1_TSTREQ_OFFS)
+#define PIC1_POL	__REG(PIC1_BASE + PIC1_POL_OFFS)
+#define PIC1_IRQ	__REG(PIC1_BASE + PIC1_IRQ_OFFS)
+#define PIC1_FIQ	__REG(PIC1_BASE + PIC1_FIQ_OFFS)
+#define PIC1_MIRQ	__REG(PIC1_BASE + PIC1_MIRQ_OFFS)
+#define PIC1_MFIQ	__REG(PIC1_BASE + PIC1_MFIQ_OFFS)
+#define PIC1_TMODE	__REG(PIC1_BASE + PIC1_TMODE_OFFS)
+#define PIC1_SYNC	__REG(PIC1_BASE + PIC1_SYNC_OFFS)
+#define PIC1_WKUP	__REG(PIC1_BASE + PIC1_WKUP_OFFS)
+#define PIC1_TMODEA	__REG(PIC1_BASE + PIC1_TMODEA_OFFS)
+#define PIC1_INTOEN	__REG(PIC1_BASE + PIC1_INTOEN_OFFS)
+#define PIC1_MEN1	__REG(PIC1_BASE + PIC1_MEN1_OFFS)
+#define PIC1_MEN	__REG(PIC1_BASE + PIC1_MEN_OFFS)
+
+/* Timer registers */
+#define TIMER_BASE		(APB1_PERI_BASE_VIRT + 0x4000)
+#define TIMER_BASE_PHYS		(APB1_PERI_BASE + 0x4000)
+
+#define TWDCFG_OFFS		0x70
+
+#define TC32EN_OFFS		0x80
+#define TC32LDV_OFFS		0x84
+#define TC32CMP0_OFFS		0x88
+#define TC32CMP1_OFFS		0x8c
+#define TC32PCNT_OFFS		0x90
+#define TC32MCNT_OFFS		0x94
+#define TC32IRQ_OFFS		0x98
+
+/* Bits in TC32EN */
+#define TC32EN_PRESCALE_MASK	0x00ffffff
+#define TC32EN_ENABLE		(1 << 24)
+#define TC32EN_LOADZERO		(1 << 25)
+#define TC32EN_STOPMODE		(1 << 26)
+#define TC32EN_LDM0		(1 << 28)
+#define TC32EN_LDM1		(1 << 29)
+
+/* Bits in TC32IRQ */
+#define TC32IRQ_MSTAT_MASK	0x0000001f
+#define TC32IRQ_RSTAT_MASK	(0x1f << 8)
+#define TC32IRQ_IRQEN0		(1 << 16)
+#define TC32IRQ_IRQEN1		(1 << 17)
+#define TC32IRQ_IRQEN2		(1 << 18)
+#define TC32IRQ_IRQEN3		(1 << 19)
+#define TC32IRQ_IRQEN4		(1 << 20)
+#define TC32IRQ_RSYNC		(1 << 30)
+#define TC32IRQ_IRQCLR		(1 << 31)
+
+/* GPIO registers */
+#define GPIOPD_BASE		(APB1_PERI_BASE_VIRT + 0x5000)
+
+#define GPIOPD_DAT_OFFS		0x00
+#define GPIOPD_DOE_OFFS		0x04
+#define GPIOPD_FS0_OFFS		0x08
+#define GPIOPD_FS1_OFFS		0x0c
+#define GPIOPD_FS2_OFFS		0x10
+#define GPIOPD_RPU_OFFS		0x30
+#define GPIOPD_RPD_OFFS		0x34
+#define GPIOPD_DV0_OFFS		0x38
+#define GPIOPD_DV1_OFFS		0x3c
+
+#define GPIOPS_BASE		(APB1_PERI_BASE_VIRT + 0x5000)
+
+#define GPIOPS_DAT_OFFS		0x40
+#define GPIOPS_DOE_OFFS		0x44
+#define GPIOPS_FS0_OFFS		0x48
+#define GPIOPS_FS1_OFFS		0x4c
+#define GPIOPS_FS2_OFFS		0x50
+#define GPIOPS_FS3_OFFS		0x54
+#define GPIOPS_RPU_OFFS		0x70
+#define GPIOPS_RPD_OFFS		0x74
+#define GPIOPS_DV0_OFFS		0x78
+#define GPIOPS_DV1_OFFS		0x7c
+
+#define GPIOPS_FS1_SDH0_BITS	0x000000ff
+#define GPIOPS_FS1_SDH1_BITS	0x0000ff00
+
+#define GPIOPU_BASE		(APB1_PERI_BASE_VIRT + 0x5000)
+
+#define GPIOPU_DAT_OFFS		0x80
+#define GPIOPU_DOE_OFFS		0x84
+#define GPIOPU_FS0_OFFS		0x88
+#define GPIOPU_FS1_OFFS		0x8c
+#define GPIOPU_FS2_OFFS		0x90
+#define GPIOPU_RPU_OFFS		0xb0
+#define GPIOPU_RPD_OFFS		0xb4
+#define GPIOPU_DV0_OFFS		0xb8
+#define GPIOPU_DV1_OFFS		0xbc
+
+#define GPIOPU_FS0_TXD0		(1 << 0)
+#define GPIOPU_FS0_RXD0		(1 << 1)
+#define GPIOPU_FS0_CTS0		(1 << 2)
+#define GPIOPU_FS0_RTS0		(1 << 3)
+#define GPIOPU_FS0_TXD1		(1 << 4)
+#define GPIOPU_FS0_RXD1		(1 << 5)
+#define GPIOPU_FS0_CTS1		(1 << 6)
+#define GPIOPU_FS0_RTS1		(1 << 7)
+#define GPIOPU_FS0_TXD2		(1 << 8)
+#define GPIOPU_FS0_RXD2		(1 << 9)
+#define GPIOPU_FS0_CTS2		(1 << 10)
+#define GPIOPU_FS0_RTS2		(1 << 11)
+#define GPIOPU_FS0_TXD3		(1 << 12)
+#define GPIOPU_FS0_RXD3		(1 << 13)
+#define GPIOPU_FS0_CTS3		(1 << 14)
+#define GPIOPU_FS0_RTS3		(1 << 15)
+#define GPIOPU_FS0_TXD4		(1 << 16)
+#define GPIOPU_FS0_RXD4		(1 << 17)
+#define GPIOPU_FS0_CTS4		(1 << 18)
+#define GPIOPU_FS0_RTS4		(1 << 19)
+
+#define GPIOFC_BASE		(APB1_PERI_BASE_VIRT + 0x5000)
+
+#define GPIOFC_DAT_OFFS		0xc0
+#define GPIOFC_DOE_OFFS		0xc4
+#define GPIOFC_FS0_OFFS		0xc8
+#define GPIOFC_FS1_OFFS		0xcc
+#define GPIOFC_FS2_OFFS		0xd0
+#define GPIOFC_FS3_OFFS		0xd4
+#define GPIOFC_RPU_OFFS		0xf0
+#define GPIOFC_RPD_OFFS		0xf4
+#define GPIOFC_DV0_OFFS		0xf8
+#define GPIOFC_DV1_OFFS		0xfc
+
+#define GPIOFD_BASE		(APB1_PERI_BASE_VIRT + 0x5000)
+
+#define GPIOFD_DAT_OFFS		0x100
+#define GPIOFD_DOE_OFFS		0x104
+#define GPIOFD_FS0_OFFS		0x108
+#define GPIOFD_FS1_OFFS		0x10c
+#define GPIOFD_FS2_OFFS		0x110
+#define GPIOFD_RPU_OFFS		0x130
+#define GPIOFD_RPD_OFFS		0x134
+#define GPIOFD_DV0_OFFS		0x138
+#define GPIOFD_DV1_OFFS		0x13c
+
+#define GPIOLC_BASE		(APB1_PERI_BASE_VIRT + 0x5000)
+
+#define GPIOLC_DAT_OFFS		0x140
+#define GPIOLC_DOE_OFFS		0x144
+#define GPIOLC_FS0_OFFS		0x148
+#define GPIOLC_FS1_OFFS		0x14c
+#define GPIOLC_RPU_OFFS		0x170
+#define GPIOLC_RPD_OFFS		0x174
+#define GPIOLC_DV0_OFFS		0x178
+#define GPIOLC_DV1_OFFS		0x17c
+
+#define GPIOLD_BASE		(APB1_PERI_BASE_VIRT + 0x5000)
+
+#define GPIOLD_DAT_OFFS		0x180
+#define GPIOLD_DOE_OFFS		0x184
+#define GPIOLD_FS0_OFFS		0x188
+#define GPIOLD_FS1_OFFS		0x18c
+#define GPIOLD_FS2_OFFS		0x190
+#define GPIOLD_RPU_OFFS		0x1b0
+#define GPIOLD_RPD_OFFS		0x1b4
+#define GPIOLD_DV0_OFFS		0x1b8
+#define GPIOLD_DV1_OFFS		0x1bc
+
+#define GPIOAD_BASE		(APB1_PERI_BASE_VIRT + 0x5000)
+
+#define GPIOAD_DAT_OFFS		0x1c0
+#define GPIOAD_DOE_OFFS		0x1c4
+#define GPIOAD_FS0_OFFS		0x1c8
+#define GPIOAD_RPU_OFFS		0x1f0
+#define GPIOAD_RPD_OFFS		0x1f4
+#define GPIOAD_DV0_OFFS		0x1f8
+#define GPIOAD_DV1_OFFS		0x1fc
+
+#define GPIOXC_BASE		(APB1_PERI_BASE_VIRT + 0x5000)
+
+#define GPIOXC_DAT_OFFS		0x200
+#define GPIOXC_DOE_OFFS		0x204
+#define GPIOXC_FS0_OFFS		0x208
+#define GPIOXC_RPU_OFFS		0x230
+#define GPIOXC_RPD_OFFS		0x234
+#define GPIOXC_DV0_OFFS		0x238
+#define GPIOXC_DV1_OFFS		0x23c
+
+#define GPIOXC_FS0		__REG(GPIOXC_BASE + GPIOXC_FS0_OFFS)
+
+#define GPIOXC_FS0_CS0		(1 << 26)
+#define GPIOXC_FS0_CS1		(1 << 27)
+
+#define GPIOXD_BASE		(APB1_PERI_BASE_VIRT + 0x5000)
+
+#define GPIOXD_DAT_OFFS		0x240
+#define GPIOXD_FS0_OFFS		0x248
+#define GPIOXD_RPU_OFFS		0x270
+#define GPIOXD_RPD_OFFS		0x274
+#define GPIOXD_DV0_OFFS		0x278
+#define GPIOXD_DV1_OFFS		0x27c
+
+#define GPIOPK_BASE		(APB1_PERI_BASE_VIRT + 0x1c000)
+
+#define GPIOPK_RST_OFFS		0x008
+#define GPIOPK_DAT_OFFS		0x100
+#define GPIOPK_DOE_OFFS		0x104
+#define GPIOPK_FS0_OFFS		0x108
+#define GPIOPK_FS1_OFFS		0x10c
+#define GPIOPK_FS2_OFFS		0x110
+#define GPIOPK_IRQST_OFFS	0x210
+#define GPIOPK_IRQEN_OFFS	0x214
+#define GPIOPK_IRQPOL_OFFS	0x218
+#define GPIOPK_IRQTM0_OFFS	0x21c
+#define GPIOPK_IRQTM1_OFFS	0x220
+#define GPIOPK_CTL_OFFS		0x22c
+
+#define PMGPIO_BASE		(APB1_PERI_BASE_VIRT + 0x10000)
+#define BACKUP_RAM_BASE		PMGPIO_BASE
+
+#define PMGPIO_DAT_OFFS		0x800
+#define PMGPIO_DOE_OFFS		0x804
+#define PMGPIO_FS0_OFFS		0x808
+#define PMGPIO_RPU_OFFS		0x810
+#define PMGPIO_RPD_OFFS		0x814
+#define PMGPIO_DV0_OFFS		0x818
+#define PMGPIO_DV1_OFFS		0x81c
+#define PMGPIO_EE0_OFFS		0x820
+#define PMGPIO_EE1_OFFS		0x824
+#define PMGPIO_CTL_OFFS		0x828
+#define PMGPIO_DI_OFFS		0x82c
+#define PMGPIO_STR_OFFS		0x830
+#define PMGPIO_STF_OFFS		0x834
+#define PMGPIO_POL_OFFS		0x838
+#define PMGPIO_APB_OFFS		0x800
+
+/* Clock controller registers */
+#define CKC_BASE	((void __iomem *)(APB1_PERI_BASE_VIRT + 0x6000))
+
+#define CLKCTRL_OFFS		0x00
+#define PLL0CFG_OFFS		0x04
+#define PLL1CFG_OFFS		0x08
+#define CLKDIVC0_OFFS		0x0c
+
+#define BCLKCTR0_OFFS		0x14
+#define SWRESET0_OFFS		0x18
+
+#define BCLKCTR1_OFFS		0x60
+#define SWRESET1_OFFS		0x64
+#define PWDCTL_OFFS		0x68
+#define PLL2CFG_OFFS		0x6c
+#define CLKDIVC1_OFFS		0x70
+
+#define ACLKREF_OFFS		0x80
+#define ACLKI2C_OFFS		0x84
+#define ACLKSPI0_OFFS		0x88
+#define ACLKSPI1_OFFS		0x8c
+#define ACLKUART0_OFFS		0x90
+#define ACLKUART1_OFFS		0x94
+#define ACLKUART2_OFFS		0x98
+#define ACLKUART3_OFFS		0x9c
+#define ACLKUART4_OFFS		0xa0
+#define ACLKTCT_OFFS		0xa4
+#define ACLKTCX_OFFS		0xa8
+#define ACLKTCZ_OFFS		0xac
+#define ACLKADC_OFFS		0xb0
+#define ACLKDAI0_OFFS		0xb4
+#define ACLKDAI1_OFFS		0xb8
+#define ACLKLCD_OFFS		0xbc
+#define ACLKSPDIF_OFFS		0xc0
+#define ACLKUSBH_OFFS		0xc4
+#define ACLKSDH0_OFFS		0xc8
+#define ACLKSDH1_OFFS		0xcc
+#define ACLKC3DEC_OFFS		0xd0
+#define ACLKEXT_OFFS		0xd4
+#define ACLKCAN0_OFFS		0xd8
+#define ACLKCAN1_OFFS		0xdc
+#define ACLKGSB0_OFFS		0xe0
+#define ACLKGSB1_OFFS		0xe4
+#define ACLKGSB2_OFFS		0xe8
+#define ACLKGSB3_OFFS		0xec
+
+#define PLLxCFG_PD		(1 << 31)
+
+/* CLKCTRL bits */
+#define CLKCTRL_XE		(1 << 31)
+
+/* CLKDIVCx bits */
+#define CLKDIVC0_XTE		(1 << 7)
+#define CLKDIVC0_XE		(1 << 15)
+#define CLKDIVC0_P1E		(1 << 23)
+#define CLKDIVC0_P0E		(1 << 31)
+
+#define CLKDIVC1_P2E		(1 << 7)
+
+/* BCLKCTR0 clock bits */
+#define BCLKCTR0_USBD		(1 << 4)
+#define BCLKCTR0_ECC		(1 << 9)
+#define BCLKCTR0_USBH0		(1 << 11)
+#define BCLKCTR0_NFC		(1 << 16)
+
+/* BCLKCTR1 clock bits */
+#define BCLKCTR1_USBH1		(1 << 20)
+
+/* SWRESET0 bits */
+#define SWRESET0_USBD		(1 << 4)
+#define SWRESET0_USBH0		(1 << 11)
+
+/* SWRESET1 bits */
+#define SWRESET1_USBH1		(1 << 20)
+
+/* System clock sources.
+ * Note: These are the clock sources that serve as parents for
+ * all other clocks. They have no parents themselves.
+ *
+ * These values are used for struct clk->root_id. All clocks
+ * that are not system clock sources have this value set to
+ * CLK_SRC_NOROOT.
+ * The values for system clocks start with CLK_SRC_PLL0 == 0
+ * because this gives us exactly the values needed for the lower
+ * 4 bits of ACLK_* registers. Therefore, CLK_SRC_NOROOT is
+ * defined as -1 to not disturb the order.
+ */
+enum root_clks {
+	CLK_SRC_NOROOT = -1,
+	CLK_SRC_PLL0 = 0,
+	CLK_SRC_PLL1,
+	CLK_SRC_PLL0DIV,
+	CLK_SRC_PLL1DIV,
+	CLK_SRC_XI,
+	CLK_SRC_XIDIV,
+	CLK_SRC_XTI,
+	CLK_SRC_XTIDIV,
+	CLK_SRC_PLL2,
+	CLK_SRC_PLL2DIV,
+	CLK_SRC_PK0,
+	CLK_SRC_PK1,
+	CLK_SRC_PK2,
+	CLK_SRC_PK3,
+	CLK_SRC_PK4,
+	CLK_SRC_48MHZ
+};
+
+#define CLK_SRC_MASK		0xf
+
+/* Bits in ACLK* registers */
+#define ACLK_EN		(1 << 28)
+#define ACLK_SEL_SHIFT		24
+#define ACLK_SEL_MASK		0x0f000000
+#define ACLK_DIV_MASK		0x00000fff
+
+/* System configuration registers */
+
+#define SCFG_BASE		(APB1_PERI_BASE_VIRT + 0x13000)
+
+#define	BMI_OFFS		0x00
+#define AHBCON0_OFFS		0x04
+#define APBPWE_OFFS		0x08
+#define DTCMWAIT_OFFS		0x0c
+#define ECCSEL_OFFS		0x10
+#define AHBCON1_OFFS		0x14
+#define SDHCFG_OFFS		0x18
+#define REMAP_OFFS		0x20
+#define LCDSIAE_OFFS		0x24
+#define XMCCFG_OFFS		0xe0
+#define IMCCFG_OFFS		0xe4
+
+/* Values for ECCSEL */
+#define ECCSEL_EXTMEM		0x0
+#define ECCSEL_DTCM		0x1
+#define ECCSEL_INT_SRAM		0x2
+#define ECCSEL_AHB		0x3
+
+/* Bits in XMCCFG */
+#define XMCCFG_NFCE		(1 << 1)
+#define XMCCFG_FDXD		(1 << 2)
+
+/* External memory controller registers */
+
+#define EMC_BASE		EXT_MEM_CTRL_BASE
+
+#define SDCFG_OFFS		0x00
+#define SDFSM_OFFS		0x04
+#define MCFG_OFFS		0x08
+
+#define CSCFG0_OFFS		0x10
+#define CSCFG1_OFFS		0x14
+#define CSCFG2_OFFS		0x18
+#define CSCFG3_OFFS		0x1c
+
+#define MCFG_SDEN		(1 << 4)
+
+#endif /* TCC8K_REGS_H */
diff --git a/arch/arm/plat-tcc/include/mach/timex.h b/arch/arm/plat-tcc/include/mach/timex.h
new file mode 100644
index 00000000000..057acbe651d
--- /dev/null
+++ b/arch/arm/plat-tcc/include/mach/timex.h
@@ -0,0 +1,5 @@
+/*
+ * A definition needed by arch core code.
+ *
+ */
+#define CLOCK_TICK_RATE		(HZ * 100000UL)
diff --git a/arch/arm/plat-tcc/include/mach/uncompress.h b/arch/arm/plat-tcc/include/mach/uncompress.h
new file mode 100644
index 00000000000..7a3e33a27a3
--- /dev/null
+++ b/arch/arm/plat-tcc/include/mach/uncompress.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de>
+ *
+ * This file is licensed under the terms of the GPL version 2.
+ */
+
+#include <linux/serial_reg.h>
+#include <linux/types.h>
+
+#include <mach/tcc8k-regs.h>
+
+unsigned int system_rev;
+
+#define ID_MASK			0x7fff
+
+static void putc(int c)
+{
+	u32 *uart_lsr = (u32 *)(UART_BASE_PHYS + (UART_LSR << 2));
+	u32 *uart_tx = (u32 *)(UART_BASE_PHYS + (UART_TX << 2));
+
+	while (!(*uart_lsr & UART_LSR_THRE))
+		barrier();
+	*uart_tx = c;
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/plat-tcc/include/mach/vmalloc.h b/arch/arm/plat-tcc/include/mach/vmalloc.h
new file mode 100644
index 00000000000..99414d9c2b9
--- /dev/null
+++ b/arch/arm/plat-tcc/include/mach/vmalloc.h
@@ -0,0 +1,10 @@
+/*
+ * Author: <linux@telechips.com>
+ * Created: June 10, 2008
+ *
+ * Copyright (C) 2000 Russell King.
+ * Copyright (C) 2008-2009 Telechips
+ *
+ * Licensed under the terms of the GPL v2.
+ */
+#define VMALLOC_END	0xf0000000UL
diff --git a/arch/arm/plat-tcc/system.c b/arch/arm/plat-tcc/system.c
new file mode 100644
index 00000000000..cc208fae3e7
--- /dev/null
+++ b/arch/arm/plat-tcc/system.c
@@ -0,0 +1,25 @@
+/*
+ * System functions for Telechips TCCxxxx SoCs
+ *
+ * Copyright (C) Hans J. Koch <hjk@linutronix.de>
+ *
+ * Licensed under the terms of the GPL v2.
+ *
+ */
+
+#include <linux/io.h>
+
+#include <mach/tcc8k-regs.h>
+
+/* System reboot */
+void plat_tcc_reboot(void)
+{
+	/* Make sure clocks are on */
+	__raw_writel(0xffffffff, CKC_BASE + BCLKCTR0_OFFS);
+
+	/* Enable watchdog reset */
+	__raw_writel(0x49, TIMER_BASE + TWDCFG_OFFS);
+	/* Wait for reset */
+	while(1)
+		;
+}
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index f51572772e2..9ac87255a03 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -90,6 +90,7 @@ config PLATFORM_AT32AP
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_ALLOCATOR
 	select HAVE_FB_ATMEL
+	select HAVE_NET_MACB
 
 #
 # CPU types
diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c
index d31590e7011..2737b975220 100644
--- a/drivers/amba/bus.c
+++ b/drivers/amba/bus.c
@@ -298,7 +298,7 @@ int amba_device_register(struct amba_device *dev, struct resource *parent)
 
 		amba_put_disable_pclk(dev);
 
-		if (cid == 0xb105f00d)
+		if (cid == AMBA_CID)
 			dev->periphid = pid;
 
 		if (!dev->periphid)
diff --git a/drivers/gpio/tc35892-gpio.c b/drivers/gpio/tc35892-gpio.c
index 1be6288780d..7e10c935a04 100644
--- a/drivers/gpio/tc35892-gpio.c
+++ b/drivers/gpio/tc35892-gpio.c
@@ -322,6 +322,9 @@ static int __devinit tc35892_gpio_probe(struct platform_device *pdev)
 		goto out_freeirq;
 	}
 
+	if (pdata->setup)
+		pdata->setup(tc35892, tc35892_gpio->chip.base);
+
 	platform_set_drvdata(pdev, tc35892_gpio);
 
 	return 0;
@@ -338,9 +341,14 @@ out_free:
 static int __devexit tc35892_gpio_remove(struct platform_device *pdev)
 {
 	struct tc35892_gpio *tc35892_gpio = platform_get_drvdata(pdev);
+	struct tc35892 *tc35892 = tc35892_gpio->tc35892;
+	struct tc35892_gpio_platform_data *pdata = tc35892->pdata->gpio;
 	int irq = platform_get_irq(pdev, 0);
 	int ret;
 
+	if (pdata->remove)
+		pdata->remove(tc35892, tc35892_gpio->chip.base);
+
 	ret = gpiochip_remove(&tc35892_gpio->chip);
 	if (ret < 0) {
 		dev_err(tc35892_gpio->dev,
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 9cc488d2149..aa037fec2f8 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -338,7 +338,7 @@ config KEYBOARD_OPENCORES
 
 config KEYBOARD_PXA27x
 	tristate "PXA27x/PXA3xx keypad support"
-	depends on PXA27x || PXA3xx
+	depends on PXA27x || PXA3xx || ARCH_MMP
 	help
 	  Enable support for PXA27x/PXA3xx keypad controller.
 
diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c
index f32404f9918..4b0ec35259a 100644
--- a/drivers/input/keyboard/pxa27x_keypad.c
+++ b/drivers/input/keyboard/pxa27x_keypad.c
@@ -32,7 +32,7 @@
 #include <asm/mach/map.h>
 
 #include <mach/hardware.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 /*
  * Keypad Controller registers
  */
@@ -330,11 +330,21 @@ static void pxa27x_keypad_scan_direct(struct pxa27x_keypad *keypad)
 	keypad->direct_key_state = new_state;
 }
 
+static void clear_wakeup_event(struct pxa27x_keypad *keypad)
+{
+	struct pxa27x_keypad_platform_data *pdata = keypad->pdata;
+
+	if (pdata->clear_wakeup_event)
+		(pdata->clear_wakeup_event)();
+}
+
 static irqreturn_t pxa27x_keypad_irq_handler(int irq, void *dev_id)
 {
 	struct pxa27x_keypad *keypad = dev_id;
 	unsigned long kpc = keypad_readl(KPC);
 
+	clear_wakeup_event(keypad);
+
 	if (kpc & KPC_DI)
 		pxa27x_keypad_scan_direct(keypad);
 
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index e4112622e5a..cc2a88d5192 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -304,13 +304,22 @@ config LEDS_MC13783
 
 config LEDS_NS2
 	tristate "LED support for Network Space v2 GPIO LEDs"
-	depends on MACH_NETSPACE_V2 || MACH_INETSPACE_V2 || MACH_NETSPACE_MAX_V2
+	depends on MACH_NETSPACE_V2 || MACH_INETSPACE_V2 || MACH_NETSPACE_MAX_V2 || D2NET_V2
 	default y
 	help
 	  This option enable support for the dual-GPIO LED found on the
 	  Network Space v2 board (and parents). This include Internet Space v2,
 	  Network Space (Max) v2 and d2 Network v2 boards.
 
+config LEDS_NETXBIG
+	tristate "LED support for Big Network series LEDs"
+	depends on MACH_NET2BIG_V2 || MACH_NET5BIG_V2
+	default y
+	help
+	  This option enable support for LEDs found on the LaCie 2Big
+	  and 5Big Network v2 boards. The LEDs are wired to a CPLD and are
+	  controlled through a GPIO extension bus.
+
 config LEDS_TRIGGERS
 	bool "LED Trigger support"
 	help
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 7d6b95831f8..9c96db40ef6 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -38,6 +38,7 @@ obj-$(CONFIG_LEDS_ADP5520)		+= leds-adp5520.o
 obj-$(CONFIG_LEDS_DELL_NETBOOKS)	+= dell-led.o
 obj-$(CONFIG_LEDS_MC13783)		+= leds-mc13783.o
 obj-$(CONFIG_LEDS_NS2)			+= leds-ns2.o
+obj-$(CONFIG_LEDS_NETXBIG)		+= leds-netxbig.o
 
 # LED SPI Drivers
 obj-$(CONFIG_LEDS_DAC124S085)		+= leds-dac124s085.o
diff --git a/drivers/leds/leds-netxbig.c b/drivers/leds/leds-netxbig.c
new file mode 100644
index 00000000000..f2e51c13439
--- /dev/null
+++ b/drivers/leds/leds-netxbig.c
@@ -0,0 +1,449 @@
+/*
+ * leds-netxbig.c - Driver for the 2Big and 5Big Network series LEDs
+ *
+ * Copyright (C) 2010 LaCie
+ *
+ * Author: Simon Guinot <sguinot@lacie.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <mach/leds-netxbig.h>
+
+/*
+ * GPIO extension bus.
+ */
+
+static DEFINE_SPINLOCK(gpio_ext_lock);
+
+static void gpio_ext_set_addr(struct netxbig_gpio_ext *gpio_ext, int addr)
+{
+	int pin;
+
+	for (pin = 0; pin < gpio_ext->num_addr; pin++)
+		gpio_set_value(gpio_ext->addr[pin], (addr >> pin) & 1);
+}
+
+static void gpio_ext_set_data(struct netxbig_gpio_ext *gpio_ext, int data)
+{
+	int pin;
+
+	for (pin = 0; pin < gpio_ext->num_data; pin++)
+		gpio_set_value(gpio_ext->data[pin], (data >> pin) & 1);
+}
+
+static void gpio_ext_enable_select(struct netxbig_gpio_ext *gpio_ext)
+{
+	/* Enable select is done on the raising edge. */
+	gpio_set_value(gpio_ext->enable, 0);
+	gpio_set_value(gpio_ext->enable, 1);
+}
+
+static void gpio_ext_set_value(struct netxbig_gpio_ext *gpio_ext,
+			       int addr, int value)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&gpio_ext_lock, flags);
+	gpio_ext_set_addr(gpio_ext, addr);
+	gpio_ext_set_data(gpio_ext, value);
+	gpio_ext_enable_select(gpio_ext);
+	spin_unlock_irqrestore(&gpio_ext_lock, flags);
+}
+
+static int __devinit gpio_ext_init(struct netxbig_gpio_ext *gpio_ext)
+{
+	int err;
+	int i;
+
+	if (unlikely(!gpio_ext))
+		return -EINVAL;
+
+	/* Configure address GPIOs. */
+	for (i = 0; i < gpio_ext->num_addr; i++) {
+		err = gpio_request(gpio_ext->addr[i], "GPIO extension addr");
+		if (err)
+			goto err_free_addr;
+		err = gpio_direction_output(gpio_ext->addr[i], 0);
+		if (err) {
+			gpio_free(gpio_ext->addr[i]);
+			goto err_free_addr;
+		}
+	}
+	/* Configure data GPIOs. */
+	for (i = 0; i < gpio_ext->num_data; i++) {
+		err = gpio_request(gpio_ext->data[i], "GPIO extension data");
+		if (err)
+			goto err_free_data;
+		err = gpio_direction_output(gpio_ext->data[i], 0);
+		if (err) {
+			gpio_free(gpio_ext->data[i]);
+			goto err_free_data;
+		}
+	}
+	/* Configure "enable select" GPIO. */
+	err = gpio_request(gpio_ext->enable, "GPIO extension enable");
+	if (err)
+		goto err_free_data;
+	err = gpio_direction_output(gpio_ext->enable, 0);
+	if (err) {
+		gpio_free(gpio_ext->enable);
+		goto err_free_data;
+	}
+
+	return 0;
+
+err_free_data:
+	for (i = i - 1; i >= 0; i--)
+		gpio_free(gpio_ext->data[i]);
+	i = gpio_ext->num_addr;
+err_free_addr:
+	for (i = i - 1; i >= 0; i--)
+		gpio_free(gpio_ext->addr[i]);
+
+	return err;
+}
+
+static void __devexit gpio_ext_free(struct netxbig_gpio_ext *gpio_ext)
+{
+	int i;
+
+	gpio_free(gpio_ext->enable);
+	for (i = gpio_ext->num_addr - 1; i >= 0; i--)
+		gpio_free(gpio_ext->addr[i]);
+	for (i = gpio_ext->num_data - 1; i >= 0; i--)
+		gpio_free(gpio_ext->data[i]);
+}
+
+/*
+ * Class LED driver.
+ */
+
+struct netxbig_led_data {
+	struct netxbig_gpio_ext	*gpio_ext;
+	struct led_classdev	cdev;
+	int			mode_addr;
+	int			*mode_val;
+	int			bright_addr;
+	int			bright_max;
+	struct			netxbig_led_timer *timer;
+	int			num_timer;
+	enum netxbig_led_mode	mode;
+	int			sata;
+	spinlock_t		lock;
+};
+
+static int netxbig_led_get_timer_mode(enum netxbig_led_mode *mode,
+				      unsigned long delay_on,
+				      unsigned long delay_off,
+				      struct netxbig_led_timer *timer,
+				      int num_timer)
+{
+	int i;
+
+	for (i = 0; i < num_timer; i++) {
+		if (timer[i].delay_on == delay_on &&
+		    timer[i].delay_off == delay_off) {
+			*mode = timer[i].mode;
+			return 0;
+		}
+	}
+	return -EINVAL;
+}
+
+static int netxbig_led_blink_set(struct led_classdev *led_cdev,
+				 unsigned long *delay_on,
+				 unsigned long *delay_off)
+{
+	struct netxbig_led_data *led_dat =
+		container_of(led_cdev, struct netxbig_led_data, cdev);
+	enum netxbig_led_mode mode;
+	int mode_val;
+	int ret;
+
+	/* Look for a LED mode with the requested timer frequency. */
+	ret = netxbig_led_get_timer_mode(&mode, *delay_on, *delay_off,
+					 led_dat->timer, led_dat->num_timer);
+	if (ret < 0)
+		return ret;
+
+	mode_val = led_dat->mode_val[mode];
+	if (mode_val == NETXBIG_LED_INVALID_MODE)
+		return -EINVAL;
+
+	spin_lock_irq(&led_dat->lock);
+
+	gpio_ext_set_value(led_dat->gpio_ext, led_dat->mode_addr, mode_val);
+	led_dat->mode = mode;
+
+	spin_unlock_irq(&led_dat->lock);
+
+	return 0;
+}
+
+static void netxbig_led_set(struct led_classdev *led_cdev,
+			    enum led_brightness value)
+{
+	struct netxbig_led_data *led_dat =
+		container_of(led_cdev, struct netxbig_led_data, cdev);
+	enum netxbig_led_mode mode;
+	int mode_val, bright_val;
+	int set_brightness = 1;
+	unsigned long flags;
+
+	spin_lock_irqsave(&led_dat->lock, flags);
+
+	if (value == LED_OFF) {
+		mode = NETXBIG_LED_OFF;
+		set_brightness = 0;
+	} else {
+		if (led_dat->sata)
+			mode = NETXBIG_LED_SATA;
+		else if (led_dat->mode == NETXBIG_LED_OFF)
+			mode = NETXBIG_LED_ON;
+		else /* Keep 'timer' mode. */
+			mode = led_dat->mode;
+	}
+	mode_val = led_dat->mode_val[mode];
+
+	gpio_ext_set_value(led_dat->gpio_ext, led_dat->mode_addr, mode_val);
+	led_dat->mode = mode;
+	/*
+	 * Note that the brightness register is shared between all the
+	 * SATA LEDs. So, change the brightness setting for a single
+	 * SATA LED will affect all the others.
+	 */
+	if (set_brightness) {
+		bright_val = DIV_ROUND_UP(value * led_dat->bright_max,
+					  LED_FULL);
+		gpio_ext_set_value(led_dat->gpio_ext,
+				   led_dat->bright_addr, bright_val);
+	}
+
+	spin_unlock_irqrestore(&led_dat->lock, flags);
+}
+
+static ssize_t netxbig_led_sata_store(struct device *dev,
+				      struct device_attribute *attr,
+				      const char *buff, size_t count)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct netxbig_led_data *led_dat =
+		container_of(led_cdev, struct netxbig_led_data, cdev);
+	unsigned long enable;
+	enum netxbig_led_mode mode;
+	int mode_val;
+	int ret;
+
+	ret = strict_strtoul(buff, 10, &enable);
+	if (ret < 0)
+		return ret;
+
+	enable = !!enable;
+
+	spin_lock_irq(&led_dat->lock);
+
+	if (led_dat->sata == enable) {
+		ret = count;
+		goto exit_unlock;
+	}
+
+	if (led_dat->mode != NETXBIG_LED_ON &&
+	    led_dat->mode != NETXBIG_LED_SATA)
+		mode = led_dat->mode; /* Keep modes 'off' and 'timer'. */
+	else if (enable)
+		mode = NETXBIG_LED_SATA;
+	else
+		mode = NETXBIG_LED_ON;
+
+	mode_val = led_dat->mode_val[mode];
+	if (mode_val == NETXBIG_LED_INVALID_MODE) {
+		ret = -EINVAL;
+		goto exit_unlock;
+	}
+
+	gpio_ext_set_value(led_dat->gpio_ext, led_dat->mode_addr, mode_val);
+	led_dat->mode = mode;
+	led_dat->sata = enable;
+
+	ret = count;
+
+exit_unlock:
+	spin_unlock_irq(&led_dat->lock);
+
+	return ret;
+}
+
+static ssize_t netxbig_led_sata_show(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct netxbig_led_data *led_dat =
+		container_of(led_cdev, struct netxbig_led_data, cdev);
+
+	return sprintf(buf, "%d\n", led_dat->sata);
+}
+
+static DEVICE_ATTR(sata, 0644, netxbig_led_sata_show, netxbig_led_sata_store);
+
+static void __devexit delete_netxbig_led(struct netxbig_led_data *led_dat)
+{
+	if (led_dat->mode_val[NETXBIG_LED_SATA] != NETXBIG_LED_INVALID_MODE)
+		device_remove_file(led_dat->cdev.dev, &dev_attr_sata);
+	led_classdev_unregister(&led_dat->cdev);
+}
+
+static int __devinit
+create_netxbig_led(struct platform_device *pdev,
+		   struct netxbig_led_data *led_dat,
+		   const struct netxbig_led *template)
+{
+	struct netxbig_led_platform_data *pdata = pdev->dev.platform_data;
+	int ret;
+
+	spin_lock_init(&led_dat->lock);
+	led_dat->gpio_ext = pdata->gpio_ext;
+	led_dat->cdev.name = template->name;
+	led_dat->cdev.default_trigger = template->default_trigger;
+	led_dat->cdev.blink_set = netxbig_led_blink_set;
+	led_dat->cdev.brightness_set = netxbig_led_set;
+	/*
+	 * Because the GPIO extension bus don't allow to read registers
+	 * value, there is no way to probe the LED initial state.
+	 * So, the initial sysfs LED value for the "brightness" and "sata"
+	 * attributes are inconsistent.
+	 *
+	 * Note that the initial LED state can't be reconfigured.
+	 * The reason is that the LED behaviour must stay uniform during
+	 * the whole boot process (bootloader+linux).
+	 */
+	led_dat->sata = 0;
+	led_dat->cdev.brightness = LED_OFF;
+	led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME;
+	led_dat->mode_addr = template->mode_addr;
+	led_dat->mode_val = template->mode_val;
+	led_dat->bright_addr = template->bright_addr;
+	led_dat->bright_max = (1 << pdata->gpio_ext->num_data) - 1;
+	led_dat->timer = pdata->timer;
+	led_dat->num_timer = pdata->num_timer;
+
+	ret = led_classdev_register(&pdev->dev, &led_dat->cdev);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * If available, expose the SATA activity blink capability through
+	 * a "sata" sysfs attribute.
+	 */
+	if (led_dat->mode_val[NETXBIG_LED_SATA] != NETXBIG_LED_INVALID_MODE) {
+		ret = device_create_file(led_dat->cdev.dev, &dev_attr_sata);
+		if (ret)
+			led_classdev_unregister(&led_dat->cdev);
+	}
+
+	return ret;
+}
+
+static int __devinit netxbig_led_probe(struct platform_device *pdev)
+{
+	struct netxbig_led_platform_data *pdata = pdev->dev.platform_data;
+	struct netxbig_led_data *leds_data;
+	int i;
+	int ret;
+
+	if (!pdata)
+		return -EINVAL;
+
+	leds_data = kzalloc(sizeof(struct netxbig_led_data) * pdata->num_leds,
+			    GFP_KERNEL);
+	if (!leds_data)
+		return -ENOMEM;
+
+	ret = gpio_ext_init(pdata->gpio_ext);
+	if (ret < 0)
+		goto err_free_data;
+
+	for (i = 0; i < pdata->num_leds; i++) {
+		ret = create_netxbig_led(pdev, &leds_data[i], &pdata->leds[i]);
+		if (ret < 0)
+			goto err_free_leds;
+	}
+
+	platform_set_drvdata(pdev, leds_data);
+
+	return 0;
+
+err_free_leds:
+	for (i = i - 1; i >= 0; i--)
+		delete_netxbig_led(&leds_data[i]);
+
+	gpio_ext_free(pdata->gpio_ext);
+err_free_data:
+	kfree(leds_data);
+
+	return ret;
+}
+
+static int __devexit netxbig_led_remove(struct platform_device *pdev)
+{
+	struct netxbig_led_platform_data *pdata = pdev->dev.platform_data;
+	struct netxbig_led_data *leds_data;
+	int i;
+
+	leds_data = platform_get_drvdata(pdev);
+
+	for (i = 0; i < pdata->num_leds; i++)
+		delete_netxbig_led(&leds_data[i]);
+
+	gpio_ext_free(pdata->gpio_ext);
+	kfree(leds_data);
+
+	return 0;
+}
+
+static struct platform_driver netxbig_led_driver = {
+	.probe		= netxbig_led_probe,
+	.remove		= __devexit_p(netxbig_led_remove),
+	.driver		= {
+		.name	= "leds-netxbig",
+		.owner	= THIS_MODULE,
+	},
+};
+MODULE_ALIAS("platform:leds-netxbig");
+
+static int __init netxbig_led_init(void)
+{
+	return platform_driver_register(&netxbig_led_driver);
+}
+
+static void __exit netxbig_led_exit(void)
+{
+	platform_driver_unregister(&netxbig_led_driver);
+}
+
+module_init(netxbig_led_init);
+module_exit(netxbig_led_exit);
+
+MODULE_AUTHOR("Simon Guinot <sguinot@lacie.com>");
+MODULE_DESCRIPTION("LED driver for LaCie xBig Network boards");
+MODULE_LICENSE("GPL");
diff --git a/drivers/leds/leds-ns2.c b/drivers/leds/leds-ns2.c
index 350eb34f049..f77d48d0b3e 100644
--- a/drivers/leds/leds-ns2.c
+++ b/drivers/leds/leds-ns2.c
@@ -141,10 +141,12 @@ static ssize_t ns2_led_sata_store(struct device *dev,
 				  struct device_attribute *attr,
 				  const char *buff, size_t count)
 {
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct ns2_led_data *led_dat =
+		container_of(led_cdev, struct ns2_led_data, cdev);
 	int ret;
 	unsigned long enable;
 	enum ns2_led_modes mode;
-	struct ns2_led_data *led_dat = dev_get_drvdata(dev);
 
 	ret = strict_strtoul(buff, 10, &enable);
 	if (ret < 0)
@@ -172,7 +174,9 @@ static ssize_t ns2_led_sata_store(struct device *dev,
 static ssize_t ns2_led_sata_show(struct device *dev,
 				 struct device_attribute *attr, char *buf)
 {
-	struct ns2_led_data *led_dat = dev_get_drvdata(dev);
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct ns2_led_data *led_dat =
+		container_of(led_cdev, struct ns2_led_data, cdev);
 
 	return sprintf(buf, "%d\n", led_dat->sata);
 }
@@ -234,7 +238,6 @@ create_ns2_led(struct platform_device *pdev, struct ns2_led_data *led_dat,
 	if (ret < 0)
 		goto err_free_slow;
 
-	dev_set_drvdata(led_dat->cdev.dev, led_dat);
 	ret = device_create_file(led_dat->cdev.dev, &dev_attr_sata);
 	if (ret < 0)
 		goto err_free_cdev;
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 840b301b567..f2e02d7d9f3 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -41,23 +41,35 @@ static unsigned int fmax = 515633;
  * @clkreg: default value for MCICLOCK register
  * @clkreg_enable: enable value for MMCICLOCK register
  * @datalength_bits: number of bits in the MMCIDATALENGTH register
+ * @fifosize: number of bytes that can be written when MMCI_TXFIFOEMPTY
+ *	      is asserted (likewise for RX)
+ * @fifohalfsize: number of bytes that can be written when MCI_TXFIFOHALFEMPTY
+ *		  is asserted (likewise for RX)
  */
 struct variant_data {
 	unsigned int		clkreg;
 	unsigned int		clkreg_enable;
 	unsigned int		datalength_bits;
+	unsigned int		fifosize;
+	unsigned int		fifohalfsize;
 };
 
 static struct variant_data variant_arm = {
+	.fifosize		= 16 * 4,
+	.fifohalfsize		= 8 * 4,
 	.datalength_bits	= 16,
 };
 
 static struct variant_data variant_u300 = {
+	.fifosize		= 16 * 4,
+	.fifohalfsize		= 8 * 4,
 	.clkreg_enable		= 1 << 13, /* HWFCEN */
 	.datalength_bits	= 16,
 };
 
 static struct variant_data variant_ux500 = {
+	.fifosize		= 30 * 4,
+	.fifohalfsize		= 8 * 4,
 	.clkreg			= MCI_CLK_ENABLE,
 	.clkreg_enable		= 1 << 14, /* HWFCEN */
 	.datalength_bits	= 24,
@@ -138,6 +150,7 @@ static void mmci_init_sg(struct mmci_host *host, struct mmc_data *data)
 
 static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
 {
+	struct variant_data *variant = host->variant;
 	unsigned int datactrl, timeout, irqmask;
 	unsigned long long clks;
 	void __iomem *base;
@@ -173,7 +186,7 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
 		 * If we have less than a FIFOSIZE of bytes to transfer,
 		 * trigger a PIO interrupt as soon as any data is available.
 		 */
-		if (host->size < MCI_FIFOSIZE)
+		if (host->size < variant->fifosize)
 			irqmask |= MCI_RXDATAAVLBLMASK;
 	} else {
 		/*
@@ -332,13 +345,15 @@ static int mmci_pio_read(struct mmci_host *host, char *buffer, unsigned int rema
 
 static int mmci_pio_write(struct mmci_host *host, char *buffer, unsigned int remain, u32 status)
 {
+	struct variant_data *variant = host->variant;
 	void __iomem *base = host->base;
 	char *ptr = buffer;
 
 	do {
 		unsigned int count, maxcnt;
 
-		maxcnt = status & MCI_TXFIFOEMPTY ? MCI_FIFOSIZE : MCI_FIFOHALFSIZE;
+		maxcnt = status & MCI_TXFIFOEMPTY ?
+			 variant->fifosize : variant->fifohalfsize;
 		count = min(remain, maxcnt);
 
 		writesl(base + MMCIFIFO, ptr, count >> 2);
@@ -362,6 +377,7 @@ static irqreturn_t mmci_pio_irq(int irq, void *dev_id)
 {
 	struct mmci_host *host = dev_id;
 	struct sg_mapping_iter *sg_miter = &host->sg_miter;
+	struct variant_data *variant = host->variant;
 	void __iomem *base = host->base;
 	unsigned long flags;
 	u32 status;
@@ -420,7 +436,7 @@ static irqreturn_t mmci_pio_irq(int irq, void *dev_id)
 	 * If we're nearing the end of the read, switch to
 	 * "any data available" mode.
 	 */
-	if (status & MCI_RXACTIVE && host->size < MCI_FIFOSIZE)
+	if (status & MCI_RXACTIVE && host->size < variant->fifosize)
 		writel(MCI_RXDATAAVLBLMASK, base + MMCIMASK1);
 
 	/*
@@ -564,18 +580,23 @@ static int mmci_get_ro(struct mmc_host *mmc)
 	if (host->gpio_wp == -ENOSYS)
 		return -ENOSYS;
 
-	return gpio_get_value(host->gpio_wp);
+	return gpio_get_value_cansleep(host->gpio_wp);
 }
 
 static int mmci_get_cd(struct mmc_host *mmc)
 {
 	struct mmci_host *host = mmc_priv(mmc);
+	struct mmci_platform_data *plat = host->plat;
 	unsigned int status;
 
-	if (host->gpio_cd == -ENOSYS)
-		status = host->plat->status(mmc_dev(host->mmc));
-	else
-		status = !gpio_get_value(host->gpio_cd);
+	if (host->gpio_cd == -ENOSYS) {
+		if (!plat->status)
+			return 1; /* Assume always present */
+
+		status = plat->status(mmc_dev(host->mmc));
+	} else
+		status = !!gpio_get_value_cansleep(host->gpio_cd)
+			^ plat->cd_invert;
 
 	/*
 	 * Use positive logic throughout - status is zero for no card,
@@ -584,6 +605,15 @@ static int mmci_get_cd(struct mmc_host *mmc)
 	return status;
 }
 
+static irqreturn_t mmci_cd_irq(int irq, void *dev_id)
+{
+	struct mmci_host *host = dev_id;
+
+	mmc_detect_change(host->mmc, msecs_to_jiffies(500));
+
+	return IRQ_HANDLED;
+}
+
 static const struct mmc_host_ops mmci_ops = {
 	.request	= mmci_request,
 	.set_ios	= mmci_set_ios,
@@ -620,6 +650,7 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
 
 	host->gpio_wp = -ENOSYS;
 	host->gpio_cd = -ENOSYS;
+	host->gpio_cd_irq = -1;
 
 	host->hw_designer = amba_manf(dev);
 	host->hw_revision = amba_rev(dev);
@@ -699,7 +730,6 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
 	if (host->vcc == NULL)
 		mmc->ocr_avail = plat->ocr_mask;
 	mmc->caps = plat->capabilities;
-	mmc->caps |= MMC_CAP_NEEDS_POLL;
 
 	/*
 	 * We can do SGIO
@@ -744,6 +774,12 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
 			host->gpio_cd = plat->gpio_cd;
 		else if (ret != -ENOSYS)
 			goto err_gpio_cd;
+
+		ret = request_any_context_irq(gpio_to_irq(plat->gpio_cd),
+					      mmci_cd_irq, 0,
+					      DRIVER_NAME " (cd)", host);
+		if (ret >= 0)
+			host->gpio_cd_irq = gpio_to_irq(plat->gpio_cd);
 	}
 	if (gpio_is_valid(plat->gpio_wp)) {
 		ret = gpio_request(plat->gpio_wp, DRIVER_NAME " (wp)");
@@ -755,6 +791,10 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
 			goto err_gpio_wp;
 	}
 
+	if ((host->plat->status || host->gpio_cd != -ENOSYS)
+	    && host->gpio_cd_irq < 0)
+		mmc->caps |= MMC_CAP_NEEDS_POLL;
+
 	ret = request_irq(dev->irq[0], mmci_irq, IRQF_SHARED, DRIVER_NAME " (cmd)", host);
 	if (ret)
 		goto unmap;
@@ -781,6 +821,8 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
 	if (host->gpio_wp != -ENOSYS)
 		gpio_free(host->gpio_wp);
  err_gpio_wp:
+	if (host->gpio_cd_irq >= 0)
+		free_irq(host->gpio_cd_irq, host);
 	if (host->gpio_cd != -ENOSYS)
 		gpio_free(host->gpio_cd);
  err_gpio_cd:
@@ -819,6 +861,8 @@ static int __devexit mmci_remove(struct amba_device *dev)
 
 		if (host->gpio_wp != -ENOSYS)
 			gpio_free(host->gpio_wp);
+		if (host->gpio_cd_irq >= 0)
+			free_irq(host->gpio_cd_irq, host);
 		if (host->gpio_cd != -ENOSYS)
 			gpio_free(host->gpio_cd);
 
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index 68970cfb81e..4ae887fc018 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -54,10 +54,16 @@
 #define MCI_DPSM_MODE		(1 << 2)
 #define MCI_DPSM_DMAENABLE	(1 << 3)
 #define MCI_DPSM_BLOCKSIZE	(1 << 4)
-#define MCI_DPSM_RWSTART	(1 << 8)
-#define MCI_DPSM_RWSTOP		(1 << 9)
-#define MCI_DPSM_RWMOD		(1 << 10)
-#define MCI_DPSM_SDIOEN		(1 << 11)
+/* Control register extensions in the ST Micro U300 and Ux500 versions */
+#define MCI_ST_DPSM_RWSTART	(1 << 8)
+#define MCI_ST_DPSM_RWSTOP	(1 << 9)
+#define MCI_ST_DPSM_RWMOD	(1 << 10)
+#define MCI_ST_DPSM_SDIOEN	(1 << 11)
+/* Control register extensions in the ST Micro Ux500 versions */
+#define MCI_ST_DPSM_DMAREQCTL	(1 << 12)
+#define MCI_ST_DPSM_DBOOTMODEEN	(1 << 13)
+#define MCI_ST_DPSM_BUSYMODE	(1 << 14)
+#define MCI_ST_DPSM_DDRMODE	(1 << 15)
 
 #define MMCIDATACNT		0x030
 #define MMCISTATUS		0x034
@@ -133,13 +139,6 @@
 	MCI_DATATIMEOUTMASK|MCI_TXUNDERRUNMASK|MCI_RXOVERRUNMASK|	\
 	MCI_CMDRESPENDMASK|MCI_CMDSENTMASK|MCI_DATABLOCKENDMASK)
 
-/*
- * The size of the FIFO in bytes.
- */
-#define MCI_FIFOSIZE	(16*4)
-	
-#define MCI_FIFOHALFSIZE (MCI_FIFOSIZE / 2)
-
 #define NR_SG		16
 
 struct clk;
@@ -154,6 +153,7 @@ struct mmci_host {
 	struct clk		*clk;
 	int			gpio_cd;
 	int			gpio_wp;
+	int			gpio_cd_irq;
 
 	unsigned int		data_xfered;
 
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 5db667c0b37..77efe462b92 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2,6 +2,9 @@
 # Network device configuration
 #
 
+config HAVE_NET_MACB
+	bool
+
 menuconfig NETDEVICES
 	default y if UML
 	depends on NET
@@ -221,7 +224,7 @@ config MII
 
 config MACB
 	tristate "Atmel MACB support"
-	depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263 || ARCH_AT91SAM9G20 || ARCH_AT91SAM9G45 || ARCH_AT91CAP9
+	depends on HAVE_NET_MACB
 	select PHYLIB
 	help
 	  The Atmel MACB ethernet interface is found on many AT32 and AT91
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 12900f7083b..3198c5335f0 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -458,6 +458,7 @@ config SERIAL_SAMSUNG_UARTS
 	int
 	depends on ARM && PLAT_SAMSUNG
 	default 2 if ARCH_S3C2400
+	default 6 if ARCH_S5P6450
 	default 4 if SERIAL_SAMSUNG_UARTS_4
 	default 3
 	help
@@ -526,12 +527,12 @@ config SERIAL_S3C24A0
 	  Serial port support for the Samsung S3C24A0 SoC
 
 config SERIAL_S3C6400
-	tristate "Samsung S3C6400/S3C6410/S5P6440/S5PC100 Serial port support"
-	depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440 || CPU_S5PC100)
+	tristate "Samsung S3C6400/S3C6410/S5P6440/S5P6450/S5PC100 Serial port support"
+	depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440 || CPU_S5P6450 || CPU_S5PC100)
 	select SERIAL_SAMSUNG_UARTS_4
 	default y
 	help
-	  Serial port support for the Samsung S3C6400, S3C6410, S5P6440
+	  Serial port support for the Samsung S3C6400, S3C6410, S5P6440, S5P6450
 	  and S5PC100 SoCs
 
 config SERIAL_S5PV210
diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index b1156ba8ad1..7ac2bf5167c 100644
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -1101,7 +1101,7 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
 	dbg("resource %p (%lx..%lx)\n", res, res->start, res->end);
 
 	port->mapbase = res->start;
-	port->membase = S3C_VA_UART + res->start - (S3C_PA_UART & 0xfff00000);
+	port->membase = S3C_VA_UART + (res->start & 0xfffff);
 	ret = platform_get_irq(platdev, 0);
 	if (ret < 0)
 		port->irq = 0;
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 9949c252c23..4b9eec68fad 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -143,10 +143,26 @@ config SPI_GPIO
 	  GPIO operations, you should be able to leverage that for better
 	  speed with a custom version of this driver; see the source code.
 
+config SPI_IMX_VER_IMX1
+	def_bool y if SOC_IMX1
+
+config SPI_IMX_VER_0_0
+	def_bool y if SOC_IMX21 || SOC_IMX27
+
+config SPI_IMX_VER_0_4
+	def_bool y if ARCH_MX31
+
+config SPI_IMX_VER_0_7
+	def_bool y if ARCH_MX25 || ARCH_MX35 || ARCH_MX51
+
+config SPI_IMX_VER_2_3
+	def_bool y if ARCH_MX51
+
 config SPI_IMX
 	tristate "Freescale i.MX SPI controllers"
 	depends on ARCH_MXC
 	select SPI_BITBANG
+	default m if IMX_HAVE_PLATFORM_SPI_IMX
 	help
 	  This enables using the Freescale i.MX SPI controllers in master
 	  mode.
diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c
index 7972e907747..55a38e2c6c1 100644
--- a/drivers/spi/spi_imx.c
+++ b/drivers/spi/spi_imx.c
@@ -56,7 +56,28 @@ struct spi_imx_config {
 	unsigned int speed_hz;
 	unsigned int bpw;
 	unsigned int mode;
-	int cs;
+	u8 cs;
+};
+
+enum spi_imx_devtype {
+	SPI_IMX_VER_IMX1,
+	SPI_IMX_VER_0_0,
+	SPI_IMX_VER_0_4,
+	SPI_IMX_VER_0_5,
+	SPI_IMX_VER_0_7,
+	SPI_IMX_VER_2_3,
+	SPI_IMX_VER_AUTODETECT,
+};
+
+struct spi_imx_data;
+
+struct spi_imx_devtype_data {
+	void (*intctrl)(struct spi_imx_data *, int);
+	int (*config)(struct spi_imx_data *, struct spi_imx_config *);
+	void (*trigger)(struct spi_imx_data *);
+	int (*rx_available)(struct spi_imx_data *);
+	void (*reset)(struct spi_imx_data *);
+	unsigned int fifosize;
 };
 
 struct spi_imx_data {
@@ -76,11 +97,7 @@ struct spi_imx_data {
 	const void *tx_buf;
 	unsigned int txfifo; /* number of words pushed in tx FIFO */
 
-	/* SoC specific functions */
-	void (*intctrl)(struct spi_imx_data *, int);
-	int (*config)(struct spi_imx_data *, struct spi_imx_config *);
-	void (*trigger)(struct spi_imx_data *);
-	int (*rx_available)(struct spi_imx_data *);
+	struct spi_imx_devtype_data devtype_data;
 };
 
 #define MXC_SPI_BUF_RX(type)						\
@@ -140,7 +157,7 @@ static unsigned int spi_imx_clkdiv_1(unsigned int fin,
 	return max;
 }
 
-/* MX1, MX31, MX35 */
+/* MX1, MX31, MX35, MX51 CSPI */
 static unsigned int spi_imx_clkdiv_2(unsigned int fin,
 		unsigned int fspi)
 {
@@ -155,6 +172,128 @@ static unsigned int spi_imx_clkdiv_2(unsigned int fin,
 	return 7;
 }
 
+#define SPI_IMX2_3_CTRL		0x08
+#define SPI_IMX2_3_CTRL_ENABLE		(1 <<  0)
+#define SPI_IMX2_3_CTRL_XCH		(1 <<  2)
+#define SPI_IMX2_3_CTRL_MODE(cs)	(1 << ((cs) +  4))
+#define SPI_IMX2_3_CTRL_POSTDIV_OFFSET	8
+#define SPI_IMX2_3_CTRL_PREDIV_OFFSET	12
+#define SPI_IMX2_3_CTRL_CS(cs)		((cs) << 18)
+#define SPI_IMX2_3_CTRL_BL_OFFSET	20
+
+#define SPI_IMX2_3_CONFIG	0x0c
+#define SPI_IMX2_3_CONFIG_SCLKPHA(cs)	(1 << ((cs) +  0))
+#define SPI_IMX2_3_CONFIG_SCLKPOL(cs)	(1 << ((cs) +  4))
+#define SPI_IMX2_3_CONFIG_SBBCTRL(cs)	(1 << ((cs) +  8))
+#define SPI_IMX2_3_CONFIG_SSBPOL(cs)	(1 << ((cs) + 12))
+
+#define SPI_IMX2_3_INT		0x10
+#define SPI_IMX2_3_INT_TEEN		(1 <<  0)
+#define SPI_IMX2_3_INT_RREN		(1 <<  3)
+
+#define SPI_IMX2_3_STAT		0x18
+#define SPI_IMX2_3_STAT_RR		(1 <<  3)
+
+/* MX51 eCSPI */
+static unsigned int spi_imx2_3_clkdiv(unsigned int fin, unsigned int fspi)
+{
+	/*
+	 * there are two 4-bit dividers, the pre-divider divides by
+	 * $pre, the post-divider by 2^$post
+	 */
+	unsigned int pre, post;
+
+	if (unlikely(fspi > fin))
+		return 0;
+
+	post = fls(fin) - fls(fspi);
+	if (fin > fspi << post)
+		post++;
+
+	/* now we have: (fin <= fspi << post) with post being minimal */
+
+	post = max(4U, post) - 4;
+	if (unlikely(post > 0xf)) {
+		pr_err("%s: cannot set clock freq: %u (base freq: %u)\n",
+				__func__, fspi, fin);
+		return 0xff;
+	}
+
+	pre = DIV_ROUND_UP(fin, fspi << post) - 1;
+
+	pr_debug("%s: fin: %u, fspi: %u, post: %u, pre: %u\n",
+			__func__, fin, fspi, post, pre);
+	return (pre << SPI_IMX2_3_CTRL_PREDIV_OFFSET) |
+		(post << SPI_IMX2_3_CTRL_POSTDIV_OFFSET);
+}
+
+static void __maybe_unused spi_imx2_3_intctrl(struct spi_imx_data *spi_imx, int enable)
+{
+	unsigned val = 0;
+
+	if (enable & MXC_INT_TE)
+		val |= SPI_IMX2_3_INT_TEEN;
+
+	if (enable & MXC_INT_RR)
+		val |= SPI_IMX2_3_INT_RREN;
+
+	writel(val, spi_imx->base + SPI_IMX2_3_INT);
+}
+
+static void __maybe_unused spi_imx2_3_trigger(struct spi_imx_data *spi_imx)
+{
+	u32 reg;
+
+	reg = readl(spi_imx->base + SPI_IMX2_3_CTRL);
+	reg |= SPI_IMX2_3_CTRL_XCH;
+	writel(reg, spi_imx->base + SPI_IMX2_3_CTRL);
+}
+
+static int __maybe_unused spi_imx2_3_config(struct spi_imx_data *spi_imx,
+		struct spi_imx_config *config)
+{
+	u32 ctrl = SPI_IMX2_3_CTRL_ENABLE, cfg = 0;
+
+	/* set master mode */
+	ctrl |= SPI_IMX2_3_CTRL_MODE(config->cs);
+
+	/* set clock speed */
+	ctrl |= spi_imx2_3_clkdiv(spi_imx->spi_clk, config->speed_hz);
+
+	/* set chip select to use */
+	ctrl |= SPI_IMX2_3_CTRL_CS(config->cs);
+
+	ctrl |= (config->bpw - 1) << SPI_IMX2_3_CTRL_BL_OFFSET;
+
+	cfg |= SPI_IMX2_3_CONFIG_SBBCTRL(config->cs);
+
+	if (config->mode & SPI_CPHA)
+		cfg |= SPI_IMX2_3_CONFIG_SCLKPHA(config->cs);
+
+	if (config->mode & SPI_CPOL)
+		cfg |= SPI_IMX2_3_CONFIG_SCLKPOL(config->cs);
+
+	if (config->mode & SPI_CS_HIGH)
+		cfg |= SPI_IMX2_3_CONFIG_SSBPOL(config->cs);
+
+	writel(ctrl, spi_imx->base + SPI_IMX2_3_CTRL);
+	writel(cfg, spi_imx->base + SPI_IMX2_3_CONFIG);
+
+	return 0;
+}
+
+static int __maybe_unused spi_imx2_3_rx_available(struct spi_imx_data *spi_imx)
+{
+	return readl(spi_imx->base + SPI_IMX2_3_STAT) & SPI_IMX2_3_STAT_RR;
+}
+
+static void __maybe_unused spi_imx2_3_reset(struct spi_imx_data *spi_imx)
+{
+	/* drain receive buffer */
+	while (spi_imx2_3_rx_available(spi_imx))
+		readl(spi_imx->base + MXC_CSPIRXDATA);
+}
+
 #define MX31_INTREG_TEEN	(1 << 0)
 #define MX31_INTREG_RREN	(1 << 3)
 
@@ -178,7 +317,7 @@ static unsigned int spi_imx_clkdiv_2(unsigned int fin,
  * the i.MX35 has a slightly different register layout for bits
  * we do not use here.
  */
-static void mx31_intctrl(struct spi_imx_data *spi_imx, int enable)
+static void __maybe_unused mx31_intctrl(struct spi_imx_data *spi_imx, int enable)
 {
 	unsigned int val = 0;
 
@@ -190,7 +329,7 @@ static void mx31_intctrl(struct spi_imx_data *spi_imx, int enable)
 	writel(val, spi_imx->base + MXC_CSPIINT);
 }
 
-static void mx31_trigger(struct spi_imx_data *spi_imx)
+static void __maybe_unused mx31_trigger(struct spi_imx_data *spi_imx)
 {
 	unsigned int reg;
 
@@ -199,20 +338,16 @@ static void mx31_trigger(struct spi_imx_data *spi_imx)
 	writel(reg, spi_imx->base + MXC_CSPICTRL);
 }
 
-static int mx31_config(struct spi_imx_data *spi_imx,
+static int __maybe_unused spi_imx0_4_config(struct spi_imx_data *spi_imx,
 		struct spi_imx_config *config)
 {
 	unsigned int reg = MX31_CSPICTRL_ENABLE | MX31_CSPICTRL_MASTER;
+	int cs = spi_imx->chipselect[config->cs];
 
 	reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, config->speed_hz) <<
 		MX31_CSPICTRL_DR_SHIFT;
 
-	if (cpu_is_mx31())
-		reg |= (config->bpw - 1) << MX31_CSPICTRL_BC_SHIFT;
-	else if (cpu_is_mx25() || cpu_is_mx35()) {
-		reg |= (config->bpw - 1) << MX35_CSPICTRL_BL_SHIFT;
-		reg |= MX31_CSPICTRL_SSCTL;
-	}
+	reg |= (config->bpw - 1) << MX31_CSPICTRL_BC_SHIFT;
 
 	if (config->mode & SPI_CPHA)
 		reg |= MX31_CSPICTRL_PHA;
@@ -220,23 +355,52 @@ static int mx31_config(struct spi_imx_data *spi_imx,
 		reg |= MX31_CSPICTRL_POL;
 	if (config->mode & SPI_CS_HIGH)
 		reg |= MX31_CSPICTRL_SSPOL;
-	if (config->cs < 0) {
-		if (cpu_is_mx31())
-			reg |= (config->cs + 32) << MX31_CSPICTRL_CS_SHIFT;
-		else if (cpu_is_mx25() || cpu_is_mx35())
-			reg |= (config->cs + 32) << MX35_CSPICTRL_CS_SHIFT;
-	}
+	if (cs < 0)
+		reg |= (cs + 32) << MX31_CSPICTRL_CS_SHIFT;
+
+	writel(reg, spi_imx->base + MXC_CSPICTRL);
+
+	return 0;
+}
+
+static int __maybe_unused spi_imx0_7_config(struct spi_imx_data *spi_imx,
+		struct spi_imx_config *config)
+{
+	unsigned int reg = MX31_CSPICTRL_ENABLE | MX31_CSPICTRL_MASTER;
+	int cs = spi_imx->chipselect[config->cs];
+
+	reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, config->speed_hz) <<
+		MX31_CSPICTRL_DR_SHIFT;
+
+	reg |= (config->bpw - 1) << MX35_CSPICTRL_BL_SHIFT;
+	reg |= MX31_CSPICTRL_SSCTL;
+
+	if (config->mode & SPI_CPHA)
+		reg |= MX31_CSPICTRL_PHA;
+	if (config->mode & SPI_CPOL)
+		reg |= MX31_CSPICTRL_POL;
+	if (config->mode & SPI_CS_HIGH)
+		reg |= MX31_CSPICTRL_SSPOL;
+	if (cs < 0)
+		reg |= (cs + 32) << MX35_CSPICTRL_CS_SHIFT;
 
 	writel(reg, spi_imx->base + MXC_CSPICTRL);
 
 	return 0;
 }
 
-static int mx31_rx_available(struct spi_imx_data *spi_imx)
+static int __maybe_unused mx31_rx_available(struct spi_imx_data *spi_imx)
 {
 	return readl(spi_imx->base + MX31_CSPISTATUS) & MX31_STATUS_RR;
 }
 
+static void __maybe_unused spi_imx0_4_reset(struct spi_imx_data *spi_imx)
+{
+	/* drain receive buffer */
+	while (readl(spi_imx->base + MX3_CSPISTAT) & MX3_CSPISTAT_RR)
+		readl(spi_imx->base + MXC_CSPIRXDATA);
+}
+
 #define MX27_INTREG_RR		(1 << 4)
 #define MX27_INTREG_TEEN	(1 << 9)
 #define MX27_INTREG_RREN	(1 << 13)
@@ -250,7 +414,7 @@ static int mx31_rx_available(struct spi_imx_data *spi_imx)
 #define MX27_CSPICTRL_DR_SHIFT	14
 #define MX27_CSPICTRL_CS_SHIFT	19
 
-static void mx27_intctrl(struct spi_imx_data *spi_imx, int enable)
+static void __maybe_unused mx27_intctrl(struct spi_imx_data *spi_imx, int enable)
 {
 	unsigned int val = 0;
 
@@ -262,7 +426,7 @@ static void mx27_intctrl(struct spi_imx_data *spi_imx, int enable)
 	writel(val, spi_imx->base + MXC_CSPIINT);
 }
 
-static void mx27_trigger(struct spi_imx_data *spi_imx)
+static void __maybe_unused mx27_trigger(struct spi_imx_data *spi_imx)
 {
 	unsigned int reg;
 
@@ -271,10 +435,11 @@ static void mx27_trigger(struct spi_imx_data *spi_imx)
 	writel(reg, spi_imx->base + MXC_CSPICTRL);
 }
 
-static int mx27_config(struct spi_imx_data *spi_imx,
+static int __maybe_unused mx27_config(struct spi_imx_data *spi_imx,
 		struct spi_imx_config *config)
 {
 	unsigned int reg = MX27_CSPICTRL_ENABLE | MX27_CSPICTRL_MASTER;
+	int cs = spi_imx->chipselect[config->cs];
 
 	reg |= spi_imx_clkdiv_1(spi_imx->spi_clk, config->speed_hz) <<
 		MX27_CSPICTRL_DR_SHIFT;
@@ -286,19 +451,24 @@ static int mx27_config(struct spi_imx_data *spi_imx,
 		reg |= MX27_CSPICTRL_POL;
 	if (config->mode & SPI_CS_HIGH)
 		reg |= MX27_CSPICTRL_SSPOL;
-	if (config->cs < 0)
-		reg |= (config->cs + 32) << MX27_CSPICTRL_CS_SHIFT;
+	if (cs < 0)
+		reg |= (cs + 32) << MX27_CSPICTRL_CS_SHIFT;
 
 	writel(reg, spi_imx->base + MXC_CSPICTRL);
 
 	return 0;
 }
 
-static int mx27_rx_available(struct spi_imx_data *spi_imx)
+static int __maybe_unused mx27_rx_available(struct spi_imx_data *spi_imx)
 {
 	return readl(spi_imx->base + MXC_CSPIINT) & MX27_INTREG_RR;
 }
 
+static void __maybe_unused spi_imx0_0_reset(struct spi_imx_data *spi_imx)
+{
+	writel(1, spi_imx->base + MXC_RESET);
+}
+
 #define MX1_INTREG_RR		(1 << 3)
 #define MX1_INTREG_TEEN		(1 << 8)
 #define MX1_INTREG_RREN		(1 << 11)
@@ -310,7 +480,7 @@ static int mx27_rx_available(struct spi_imx_data *spi_imx)
 #define MX1_CSPICTRL_MASTER	(1 << 10)
 #define MX1_CSPICTRL_DR_SHIFT	13
 
-static void mx1_intctrl(struct spi_imx_data *spi_imx, int enable)
+static void __maybe_unused mx1_intctrl(struct spi_imx_data *spi_imx, int enable)
 {
 	unsigned int val = 0;
 
@@ -322,7 +492,7 @@ static void mx1_intctrl(struct spi_imx_data *spi_imx, int enable)
 	writel(val, spi_imx->base + MXC_CSPIINT);
 }
 
-static void mx1_trigger(struct spi_imx_data *spi_imx)
+static void __maybe_unused mx1_trigger(struct spi_imx_data *spi_imx)
 {
 	unsigned int reg;
 
@@ -331,7 +501,7 @@ static void mx1_trigger(struct spi_imx_data *spi_imx)
 	writel(reg, spi_imx->base + MXC_CSPICTRL);
 }
 
-static int mx1_config(struct spi_imx_data *spi_imx,
+static int __maybe_unused mx1_config(struct spi_imx_data *spi_imx,
 		struct spi_imx_config *config)
 {
 	unsigned int reg = MX1_CSPICTRL_ENABLE | MX1_CSPICTRL_MASTER;
@@ -350,11 +520,73 @@ static int mx1_config(struct spi_imx_data *spi_imx,
 	return 0;
 }
 
-static int mx1_rx_available(struct spi_imx_data *spi_imx)
+static int __maybe_unused mx1_rx_available(struct spi_imx_data *spi_imx)
 {
 	return readl(spi_imx->base + MXC_CSPIINT) & MX1_INTREG_RR;
 }
 
+static void __maybe_unused mx1_reset(struct spi_imx_data *spi_imx)
+{
+	writel(1, spi_imx->base + MXC_RESET);
+}
+
+/*
+ * These version numbers are taken from the Freescale driver.  Unfortunately it
+ * doesn't support i.MX1, so this entry doesn't match the scheme. :-(
+ */
+static struct spi_imx_devtype_data spi_imx_devtype_data[] __devinitdata = {
+#ifdef CONFIG_SPI_IMX_VER_IMX1
+	[SPI_IMX_VER_IMX1] = {
+		.intctrl = mx1_intctrl,
+		.config = mx1_config,
+		.trigger = mx1_trigger,
+		.rx_available = mx1_rx_available,
+		.reset = mx1_reset,
+		.fifosize = 8,
+	},
+#endif
+#ifdef CONFIG_SPI_IMX_VER_0_0
+	[SPI_IMX_VER_0_0] = {
+		.intctrl = mx27_intctrl,
+		.config = mx27_config,
+		.trigger = mx27_trigger,
+		.rx_available = mx27_rx_available,
+		.reset = spi_imx0_0_reset,
+		.fifosize = 8,
+	},
+#endif
+#ifdef CONFIG_SPI_IMX_VER_0_4
+	[SPI_IMX_VER_0_4] = {
+		.intctrl = mx31_intctrl,
+		.config = spi_imx0_4_config,
+		.trigger = mx31_trigger,
+		.rx_available = mx31_rx_available,
+		.reset = spi_imx0_4_reset,
+		.fifosize = 8,
+	},
+#endif
+#ifdef CONFIG_SPI_IMX_VER_0_7
+	[SPI_IMX_VER_0_7] = {
+		.intctrl = mx31_intctrl,
+		.config = spi_imx0_7_config,
+		.trigger = mx31_trigger,
+		.rx_available = mx31_rx_available,
+		.reset = spi_imx0_4_reset,
+		.fifosize = 8,
+	},
+#endif
+#ifdef CONFIG_SPI_IMX_VER_2_3
+	[SPI_IMX_VER_2_3] = {
+		.intctrl = spi_imx2_3_intctrl,
+		.config = spi_imx2_3_config,
+		.trigger = spi_imx2_3_trigger,
+		.rx_available = spi_imx2_3_rx_available,
+		.reset = spi_imx2_3_reset,
+		.fifosize = 64,
+	},
+#endif
+};
+
 static void spi_imx_chipselect(struct spi_device *spi, int is_active)
 {
 	struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
@@ -370,21 +602,21 @@ static void spi_imx_chipselect(struct spi_device *spi, int is_active)
 
 static void spi_imx_push(struct spi_imx_data *spi_imx)
 {
-	while (spi_imx->txfifo < 8) {
+	while (spi_imx->txfifo < spi_imx->devtype_data.fifosize) {
 		if (!spi_imx->count)
 			break;
 		spi_imx->tx(spi_imx);
 		spi_imx->txfifo++;
 	}
 
-	spi_imx->trigger(spi_imx);
+	spi_imx->devtype_data.trigger(spi_imx);
 }
 
 static irqreturn_t spi_imx_isr(int irq, void *dev_id)
 {
 	struct spi_imx_data *spi_imx = dev_id;
 
-	while (spi_imx->rx_available(spi_imx)) {
+	while (spi_imx->devtype_data.rx_available(spi_imx)) {
 		spi_imx->rx(spi_imx);
 		spi_imx->txfifo--;
 	}
@@ -398,11 +630,12 @@ static irqreturn_t spi_imx_isr(int irq, void *dev_id)
 		/* No data left to push, but still waiting for rx data,
 		 * enable receive data available interrupt.
 		 */
-		spi_imx->intctrl(spi_imx, MXC_INT_RR);
+		spi_imx->devtype_data.intctrl(
+				spi_imx, MXC_INT_RR);
 		return IRQ_HANDLED;
 	}
 
-	spi_imx->intctrl(spi_imx, 0);
+	spi_imx->devtype_data.intctrl(spi_imx, 0);
 	complete(&spi_imx->xfer_done);
 
 	return IRQ_HANDLED;
@@ -417,7 +650,7 @@ static int spi_imx_setupxfer(struct spi_device *spi,
 	config.bpw = t ? t->bits_per_word : spi->bits_per_word;
 	config.speed_hz  = t ? t->speed_hz : spi->max_speed_hz;
 	config.mode = spi->mode;
-	config.cs = spi_imx->chipselect[spi->chip_select];
+	config.cs = spi->chip_select;
 
 	if (!config.speed_hz)
 		config.speed_hz = spi->max_speed_hz;
@@ -439,7 +672,7 @@ static int spi_imx_setupxfer(struct spi_device *spi,
 	} else
 		BUG();
 
-	spi_imx->config(spi_imx, &config);
+	spi_imx->devtype_data.config(spi_imx, &config);
 
 	return 0;
 }
@@ -458,7 +691,7 @@ static int spi_imx_transfer(struct spi_device *spi,
 
 	spi_imx_push(spi_imx);
 
-	spi_imx->intctrl(spi_imx, MXC_INT_TE);
+	spi_imx->devtype_data.intctrl(spi_imx, MXC_INT_TE);
 
 	wait_for_completion(&spi_imx->xfer_done);
 
@@ -485,6 +718,39 @@ static void spi_imx_cleanup(struct spi_device *spi)
 {
 }
 
+static struct platform_device_id spi_imx_devtype[] = {
+	{
+		.name = DRIVER_NAME,
+		.driver_data = SPI_IMX_VER_AUTODETECT,
+	}, {
+		.name = "imx1-cspi",
+		.driver_data = SPI_IMX_VER_IMX1,
+	}, {
+		.name = "imx21-cspi",
+		.driver_data = SPI_IMX_VER_0_0,
+	}, {
+		.name = "imx25-cspi",
+		.driver_data = SPI_IMX_VER_0_7,
+	}, {
+		.name = "imx27-cspi",
+		.driver_data = SPI_IMX_VER_0_0,
+	}, {
+		.name = "imx31-cspi",
+		.driver_data = SPI_IMX_VER_0_4,
+	}, {
+		.name = "imx35-cspi",
+		.driver_data = SPI_IMX_VER_0_7,
+	}, {
+		.name = "imx51-cspi",
+		.driver_data = SPI_IMX_VER_0_7,
+	}, {
+		.name = "imx51-ecspi",
+		.driver_data = SPI_IMX_VER_2_3,
+	}, {
+		/* sentinel */
+	}
+};
+
 static int __devinit spi_imx_probe(struct platform_device *pdev)
 {
 	struct spi_imx_master *mxc_platform_info;
@@ -536,6 +802,31 @@ static int __devinit spi_imx_probe(struct platform_device *pdev)
 
 	init_completion(&spi_imx->xfer_done);
 
+	if (pdev->id_entry->driver_data == SPI_IMX_VER_AUTODETECT) {
+		if (cpu_is_mx25() || cpu_is_mx35())
+			spi_imx->devtype_data =
+				spi_imx_devtype_data[SPI_IMX_VER_0_7];
+		else if (cpu_is_mx25() || cpu_is_mx31() || cpu_is_mx35())
+			spi_imx->devtype_data =
+				spi_imx_devtype_data[SPI_IMX_VER_0_4];
+		else if (cpu_is_mx27() || cpu_is_mx21())
+			spi_imx->devtype_data =
+				spi_imx_devtype_data[SPI_IMX_VER_0_0];
+		else if (cpu_is_mx1())
+			spi_imx->devtype_data =
+				spi_imx_devtype_data[SPI_IMX_VER_IMX1];
+		else
+			BUG();
+	} else
+		spi_imx->devtype_data =
+			spi_imx_devtype_data[pdev->id_entry->driver_data];
+
+	if (!spi_imx->devtype_data.intctrl) {
+		dev_err(&pdev->dev, "no support for this device compiled in\n");
+		ret = -ENODEV;
+		goto out_gpio_free;
+	}
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
 		dev_err(&pdev->dev, "can't get platform resource\n");
@@ -567,24 +858,6 @@ static int __devinit spi_imx_probe(struct platform_device *pdev)
 		goto out_iounmap;
 	}
 
-	if (cpu_is_mx25() || cpu_is_mx31() || cpu_is_mx35()) {
-		spi_imx->intctrl = mx31_intctrl;
-		spi_imx->config = mx31_config;
-		spi_imx->trigger = mx31_trigger;
-		spi_imx->rx_available = mx31_rx_available;
-	} else  if (cpu_is_mx27() || cpu_is_mx21()) {
-		spi_imx->intctrl = mx27_intctrl;
-		spi_imx->config = mx27_config;
-		spi_imx->trigger = mx27_trigger;
-		spi_imx->rx_available = mx27_rx_available;
-	} else if (cpu_is_mx1()) {
-		spi_imx->intctrl = mx1_intctrl;
-		spi_imx->config = mx1_config;
-		spi_imx->trigger = mx1_trigger;
-		spi_imx->rx_available = mx1_rx_available;
-	} else
-		BUG();
-
 	spi_imx->clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(spi_imx->clk)) {
 		dev_err(&pdev->dev, "unable to get clock\n");
@@ -595,15 +868,9 @@ static int __devinit spi_imx_probe(struct platform_device *pdev)
 	clk_enable(spi_imx->clk);
 	spi_imx->spi_clk = clk_get_rate(spi_imx->clk);
 
-	if (cpu_is_mx1() || cpu_is_mx21() || cpu_is_mx27())
-		writel(1, spi_imx->base + MXC_RESET);
-
-	/* drain receive buffer */
-	if (cpu_is_mx25() || cpu_is_mx31() || cpu_is_mx35())
-		while (readl(spi_imx->base + MX3_CSPISTAT) & MX3_CSPISTAT_RR)
-			readl(spi_imx->base + MXC_CSPIRXDATA);
+	spi_imx->devtype_data.reset(spi_imx);
 
-	spi_imx->intctrl(spi_imx, 0);
+	spi_imx->devtype_data.intctrl(spi_imx, 0);
 
 	ret = spi_bitbang_start(&spi_imx->bitbang);
 	if (ret) {
@@ -668,6 +935,7 @@ static struct platform_driver spi_imx_driver = {
 		   .name = DRIVER_NAME,
 		   .owner = THIS_MODULE,
 		   },
+	.id_table = spi_imx_devtype,
 	.probe = spi_imx_probe,
 	.remove = __devexit_p(spi_imx_remove),
 };
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index 41816389477..afef7b0a419 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -24,6 +24,7 @@
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 #include <mach/ohci.h>
+#include <mach/pxa3xx-u2d.h>
 
 /*
  * UHC: USB Host Controller (OHCI-like) register definitions
@@ -235,6 +236,9 @@ static int pxa27x_start_hc(struct pxa27x_ohci *ohci, struct device *dev)
 	if (retval < 0)
 		return retval;
 
+	if (cpu_is_pxa3xx())
+		pxa3xx_u2d_start_hc(&ohci_to_hcd(&ohci->ohci)->self);
+
 	uhchr = __raw_readl(ohci->mmio_base + UHCHR) & ~UHCHR_SSE;
 	__raw_writel(uhchr, ohci->mmio_base + UHCHR);
 	__raw_writel(UHCHIE_UPRIE | UHCHIE_RWIE, ohci->mmio_base + UHCHIE);
@@ -251,6 +255,9 @@ static void pxa27x_stop_hc(struct pxa27x_ohci *ohci, struct device *dev)
 
 	inf = dev->platform_data;
 
+	if (cpu_is_pxa3xx())
+		pxa3xx_u2d_stop_hc(&ohci_to_hcd(&ohci->ohci)->self);
+
 	if (inf->exit)
 		inf->exit(dev);
 
diff --git a/drivers/video/pxa168fb.c b/drivers/video/pxa168fb.c
index a31a77ff6f3..cea6403ae71 100644
--- a/drivers/video/pxa168fb.c
+++ b/drivers/video/pxa168fb.c
@@ -784,12 +784,53 @@ failed:
 	return ret;
 }
 
+static int __devexit pxa168fb_remove(struct platform_device *pdev)
+{
+	struct pxa168fb_info *fbi = platform_get_drvdata(pdev);
+	struct fb_info *info;
+	int irq;
+	unsigned int data;
+
+	if (!fbi)
+		return 0;
+
+	/* disable DMA transfer */
+	data = readl(fbi->reg_base + LCD_SPU_DMA_CTRL0);
+	data &= ~CFG_GRA_ENA_MASK;
+	writel(data, fbi->reg_base + LCD_SPU_DMA_CTRL0);
+
+	info = fbi->info;
+
+	unregister_framebuffer(info);
+
+	writel(GRA_FRAME_IRQ0_ENA(0x0), fbi->reg_base + SPU_IRQ_ENA);
+
+	if (info->cmap.len)
+		fb_dealloc_cmap(&info->cmap);
+
+	irq = platform_get_irq(pdev, 0);
+	free_irq(irq, fbi);
+
+	dma_free_writecombine(fbi->dev, PAGE_ALIGN(info->fix.smem_len),
+				info->screen_base, info->fix.smem_start);
+
+	iounmap(fbi->reg_base);
+
+	clk_disable(fbi->clk);
+	clk_put(fbi->clk);
+
+	framebuffer_release(info);
+
+	return 0;
+}
+
 static struct platform_driver pxa168fb_driver = {
 	.driver		= {
 		.name	= "pxa168-fb",
 		.owner	= THIS_MODULE,
 	},
 	.probe		= pxa168fb_probe,
+	.remove		= __devexit_p(pxa168fb_remove),
 };
 
 static int __init pxa168fb_init(void)
@@ -798,6 +839,12 @@ static int __init pxa168fb_init(void)
 }
 module_init(pxa168fb_init);
 
+static void __exit pxa168fb_exit(void)
+{
+	platform_driver_unregister(&pxa168fb_driver);
+}
+module_exit(pxa168fb_exit);
+
 MODULE_AUTHOR("Lennert Buytenhek <buytenh@marvell.com> "
 	      "Green Wan <gwan@marvell.com>");
 MODULE_DESCRIPTION("Framebuffer driver for PXA168/910");
diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c
index 535e763ab1a..6884e198e0c 100644
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -800,7 +800,7 @@ static int load_elf_binary(struct linux_binprm *bprm, struct pt_regs *regs)
 			 * default mmap base, as well as whatever program they
 			 * might try to exec.  This is because the brk will
 			 * follow the loader, and is not movable.  */
-#ifdef CONFIG_X86
+#if defined(CONFIG_X86) || defined(CONFIG_ARM)
 			load_bias = 0;
 #else
 			load_bias = ELF_PAGESTART(ELF_ET_DYN_BASE - vaddr);
diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h
index b0c17401243..c6454cca044 100644
--- a/include/linux/amba/bus.h
+++ b/include/linux/amba/bus.h
@@ -20,6 +20,7 @@
 #include <linux/resource.h>
 
 #define AMBA_NR_IRQS	2
+#define AMBA_CID	0xb105f00d
 
 struct clk;
 
@@ -70,9 +71,15 @@ void amba_release_regions(struct amba_device *);
 #define amba_pclk_disable(d)	\
 	do { if (!IS_ERR((d)->pclk)) clk_disable((d)->pclk); } while (0)
 
-#define amba_config(d)	(((d)->periphid >> 24) & 0xff)
-#define amba_rev(d)	(((d)->periphid >> 20) & 0x0f)
-#define amba_manf(d)	(((d)->periphid >> 12) & 0xff)
-#define amba_part(d)	((d)->periphid & 0xfff)
+/* Some drivers don't use the struct amba_device */
+#define AMBA_CONFIG_BITS(a) (((a) >> 24) & 0xff)
+#define AMBA_REV_BITS(a) (((a) >> 20) & 0x0f)
+#define AMBA_MANF_BITS(a) (((a) >> 12) & 0xff)
+#define AMBA_PART_BITS(a) ((a) & 0xfff)
+
+#define amba_config(d)	AMBA_CONFIG_BITS((d)->periphid)
+#define amba_rev(d)	AMBA_REV_BITS((d)->periphid)
+#define amba_manf(d)	AMBA_MANF_BITS((d)->periphid)
+#define amba_part(d)	AMBA_PART_BITS((d)->periphid)
 
 #endif
diff --git a/include/linux/amba/mmci.h b/include/linux/amba/mmci.h
index ca84ce70d5d..f4ee9acc972 100644
--- a/include/linux/amba/mmci.h
+++ b/include/linux/amba/mmci.h
@@ -24,6 +24,7 @@
  * whether a card is present in the MMC slot or not
  * @gpio_wp: read this GPIO pin to see if the card is write protected
  * @gpio_cd: read this GPIO pin to detect card insertion
+ * @cd_invert: true if the gpio_cd pin value is active low
  * @capabilities: the capabilities of the block as implemented in
  * this platform, signify anything MMC_CAP_* from mmc/host.h
  */
@@ -35,6 +36,7 @@ struct mmci_platform_data {
 	unsigned int (*status)(struct device *);
 	int	gpio_wp;
 	int	gpio_cd;
+	bool	cd_invert;
 	unsigned long capabilities;
 };
 
diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h
index e1b634b635f..6021588ba0a 100644
--- a/include/linux/amba/serial.h
+++ b/include/linux/amba/serial.h
@@ -32,7 +32,9 @@
 #define UART01x_RSR		0x04	/* Receive status register (Read). */
 #define UART01x_ECR		0x04	/* Error clear register (Write). */
 #define UART010_LCRH		0x08	/* Line control register, high byte. */
+#define ST_UART011_DMAWM	0x08    /* DMA watermark configure register. */
 #define UART010_LCRM		0x0C	/* Line control register, middle byte. */
+#define ST_UART011_TIMEOUT	0x0C    /* Timeout period register. */
 #define UART010_LCRL		0x10	/* Line control register, low byte. */
 #define UART010_CR		0x14	/* Control register. */
 #define UART01x_FR		0x18	/* Flag register (Read only). */
@@ -51,6 +53,15 @@
 #define UART011_MIS		0x40	/* Masked interrupt status. */
 #define UART011_ICR		0x44	/* Interrupt clear register. */
 #define UART011_DMACR		0x48	/* DMA control register. */
+#define ST_UART011_XFCR		0x50	/* XON/XOFF control register. */
+#define ST_UART011_XON1		0x54	/* XON1 register. */
+#define ST_UART011_XON2		0x58	/* XON2 register. */
+#define ST_UART011_XOFF1	0x5C	/* XON1 register. */
+#define ST_UART011_XOFF2	0x60	/* XON2 register. */
+#define ST_UART011_ITCR		0x80	/* Integration test control register. */
+#define ST_UART011_ITIP		0x84	/* Integration test input register. */
+#define ST_UART011_ABCR		0x100	/* Autobaud control register. */
+#define ST_UART011_ABIMSC	0x15C	/* Autobaud interrupt mask/clear register. */
 
 #define UART011_DR_OE		(1 << 11)
 #define UART011_DR_BE		(1 << 10)
diff --git a/include/linux/mfd/tc35892.h b/include/linux/mfd/tc35892.h
index e47f770d306..eff3094ca84 100644
--- a/include/linux/mfd/tc35892.h
+++ b/include/linux/mfd/tc35892.h
@@ -111,9 +111,13 @@ extern int tc35892_set_bits(struct tc35892 *tc35892, u8 reg, u8 mask, u8 val);
  * struct tc35892_gpio_platform_data - TC35892 GPIO platform data
  * @gpio_base: first gpio number assigned to TC35892.  A maximum of
  *	       %TC35892_NR_GPIOS GPIOs will be allocated.
+ * @setup: callback for board-specific initialization
+ * @remove: callback for board-specific teardown
  */
 struct tc35892_gpio_platform_data {
 	int gpio_base;
+	void (*setup)(struct tc35892 *tc35892, unsigned gpio_base);
+	void (*remove)(struct tc35892 *tc35892, unsigned gpio_base);
 };
 
 /**
diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig
index e550d2eda1d..e04b8bcdef8 100644
--- a/kernel/trace/Kconfig
+++ b/kernel/trace/Kconfig
@@ -126,7 +126,7 @@ if FTRACE
 config FUNCTION_TRACER
 	bool "Kernel Function Tracer"
 	depends on HAVE_FUNCTION_TRACER
-	select FRAME_POINTER
+	select FRAME_POINTER if (!ARM_UNWIND)
 	select KALLSYMS
 	select GENERIC_TRACER
 	select CONTEXT_SWITCH_TRACER
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index 843bd4f4ffc..5ad25e17b6c 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -221,7 +221,8 @@ else
 cmd_record_mcount = set -e ; perl $(srctree)/scripts/recordmcount.pl "$(ARCH)" \
 	"$(if $(CONFIG_CPU_BIG_ENDIAN),big,little)" \
 	"$(if $(CONFIG_64BIT),64,32)" \
-	"$(OBJDUMP)" "$(OBJCOPY)" "$(CC)" "$(LD)" "$(NM)" "$(RM)" "$(MV)" \
+	"$(OBJDUMP)" "$(OBJCOPY)" "$(CC) $(KBUILD_CFLAGS)" \
+	"$(LD)" "$(NM)" "$(RM)" "$(MV)" \
 	"$(if $(part-of-module),1,0)" "$(@)";
 endif
 endif
diff --git a/scripts/recordmcount.pl b/scripts/recordmcount.pl
index e67f0548608..1d7963f4ee7 100755
--- a/scripts/recordmcount.pl
+++ b/scripts/recordmcount.pl
@@ -270,6 +270,8 @@ if ($arch eq "x86_64") {
 } elsif ($arch eq "arm") {
     $alignment = 2;
     $section_type = '%progbits';
+    $mcount_regex = "^\\s*([0-9a-fA-F]+):\\s*R_ARM_(CALL|PC24|THM_CALL)" .
+			"\\s+(__gnu_mcount_nc|mcount)\$";
 
 } elsif ($arch eq "ia64") {
     $mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\s_mcount\$";
author	Linus Torvalds <torvalds@linux-foundation.org>	2010-10-21 16:42:32 -0700
committer	Linus Torvalds <torvalds@linux-foundation.org>	2010-10-21 16:42:32 -0700
commit	b5153163ed580e00c67bdfecb02b2e3843817b3e (patch)
tree	b8c878601f07f5df8f694435857a5f3dcfd75482
parent	a8cbf22559ceefdcdfac00701e8e6da7518b7e8e (diff)
parent	6451d7783ba5ff24eb1a544eaa6665b890f30466 (diff)