Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: (22 commits)
  regulator: Remove default DEBUG define from TPS6586x
  regulator: tps6507x - add missing platform_set_drvdata in tps6507x_pmic_probe
  regulator: tps6586x - add regulator_unregister() in tps6586x_regulator_remove()
  mfd: max8998 - fix incorrect kfree(i2c) in i2c_driver probe callback handler
  regulator: lp3971 - remove unnecessary ret value checking in lp3971_i2c_write()
  regulator: max8660 - fix a memory leak in max8660_remove()
  regulator: max1586 - fix a memory leak in max1586_pmic_remove()
  regulator: Default GPIO controlled WM8994 regulators to disabled
  regulator: lp3971 - remove unnecessary ret value checking in lp3971_i2c_write()
  max8998: fix off-by-one value range checking
  regulator: tps6586x: fix millivolt return values and SM2 table
  regulator: tps6586x: add dependancy on MFD_TPS6585x
  regulator: add TPS6586X regulator driver
  regulator: MAX8998: set_voltage bugfix. ramp_up delay and min/max voltage
  regulator: add support for regulators on the ab8500 MFD
  ab8500-mfd: add regulator support to ab8500 mfd device
  tps65023: Allow registering similar TPS65021
  drivers: regulators: depend on MFD_MAX8998
  drivers: regulator: add Maxim 8998 driver
  ISL6271A voltage regulator support.
  ...

21 files changed, 2431 insertions, 22 deletions

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index d75909e7cf2..db51ea1c608 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -293,6 +293,16 @@ config MFD_MAX8925
 	  accessing the device, additional drivers must be enabled in order
 	  to use the functionality of the device.
 
+config MFD_MAX8998
+	bool "Maxim Semiconductor MAX8998 PMIC Support"
+	depends on I2C=y
+	select MFD_CORE
+	help
+	  Say yes here to support for Maxim Semiconductor MAX8998. This is
+	  a Power Management IC. This driver provies common support for
+	  accessing the device, additional drivers must be enabled in order
+	  to use the functionality of the device.
+
 config MFD_WM8400
 	tristate "Support Wolfson Microelectronics WM8400"
 	select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 1e48d7e3e88..feaeeaeeddb 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -58,6 +58,7 @@ obj-$(CONFIG_UCB1400_CORE)	+= ucb1400_core.o
 obj-$(CONFIG_PMIC_DA903X)	+= da903x.o
 max8925-objs			:= max8925-core.o max8925-i2c.o
 obj-$(CONFIG_MFD_MAX8925)	+= max8925.o
+obj-$(CONFIG_MFD_MAX8998)	+= max8998.o
 
 pcf50633-objs			:= pcf50633-core.o pcf50633-irq.o
 obj-$(CONFIG_MFD_PCF50633)	+= pcf50633.o
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index f3d26fa9c34..defa786dee3 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -16,6 +16,7 @@
 #include <linux/platform_device.h>
 #include <linux/mfd/core.h>
 #include <linux/mfd/ab8500.h>
+#include <linux/regulator/ab8500.h>
 
 /*
  * Interrupt register offsets
@@ -352,6 +353,7 @@ static struct mfd_cell ab8500_devs[] = {
 	{ .name = "ab8500-audio", },
 	{ .name = "ab8500-usb", },
 	{ .name = "ab8500-pwm", },
+	{ .name = "ab8500-regulator", },
 };
 
 int __devinit ab8500_init(struct ab8500 *ab8500)
@@ -411,7 +413,7 @@ int __devinit ab8500_init(struct ab8500 *ab8500)
 			goto out_removeirq;
 	}
 
-	ret = mfd_add_devices(ab8500->dev, -1, ab8500_devs,
+	ret = mfd_add_devices(ab8500->dev, 0, ab8500_devs,
 			      ARRAY_SIZE(ab8500_devs), NULL,
 			      ab8500->irq_base);
 	if (ret)
diff --git a/drivers/mfd/max8998.c b/drivers/mfd/max8998.c
new file mode 100644
index 00000000000..73e6f5c4efc
--- /dev/null
+++ b/drivers/mfd/max8998.c
@@ -0,0 +1,158 @@
+/*
+ * max8698.c - mfd core driver for the Maxim 8998
+ *
+ *  Copyright (C) 2009-2010 Samsung Electronics
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *  Marek Szyprowski <m.szyprowski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/max8998.h>
+#include <linux/mfd/max8998-private.h>
+
+static struct mfd_cell max8998_devs[] = {
+	{
+		.name = "max8998-pmic",
+	}
+};
+
+static int max8998_i2c_device_read(struct max8998_dev *max8998, u8 reg, u8 *dest)
+{
+	struct i2c_client *client = max8998->i2c_client;
+	int ret;
+
+	mutex_lock(&max8998->iolock);
+	ret = i2c_smbus_read_byte_data(client, reg);
+	mutex_unlock(&max8998->iolock);
+	if (ret < 0)
+		return ret;
+
+	ret &= 0xff;
+	*dest = ret;
+	return 0;
+}
+
+static int max8998_i2c_device_write(struct max8998_dev *max8998, u8 reg, u8 value)
+{
+	struct i2c_client *client = max8998->i2c_client;
+	int ret;
+
+	mutex_lock(&max8998->iolock);
+	ret = i2c_smbus_write_byte_data(client, reg, value);
+	mutex_unlock(&max8998->iolock);
+	return ret;
+}
+
+static int max8998_i2c_device_update(struct max8998_dev *max8998, u8 reg,
+				     u8 val, u8 mask)
+{
+	struct i2c_client *client = max8998->i2c_client;
+	int ret;
+
+	mutex_lock(&max8998->iolock);
+	ret = i2c_smbus_read_byte_data(client, reg);
+	if (ret >= 0) {
+		u8 old_val = ret & 0xff;
+		u8 new_val = (val & mask) | (old_val & (~mask));
+		ret = i2c_smbus_write_byte_data(client, reg, new_val);
+		if (ret >= 0)
+			ret = 0;
+	}
+	mutex_unlock(&max8998->iolock);
+	return ret;
+}
+
+static int max8998_i2c_probe(struct i2c_client *i2c,
+			    const struct i2c_device_id *id)
+{
+	struct max8998_dev *max8998;
+	int ret = 0;
+
+	max8998 = kzalloc(sizeof(struct max8998_dev), GFP_KERNEL);
+	if (max8998 == NULL)
+		return -ENOMEM;
+
+	i2c_set_clientdata(i2c, max8998);
+	max8998->dev = &i2c->dev;
+	max8998->i2c_client = i2c;
+	max8998->dev_read = max8998_i2c_device_read;
+	max8998->dev_write = max8998_i2c_device_write;
+	max8998->dev_update = max8998_i2c_device_update;
+	mutex_init(&max8998->iolock);
+
+	ret = mfd_add_devices(max8998->dev, -1,
+			      max8998_devs, ARRAY_SIZE(max8998_devs),
+			      NULL, 0);
+	if (ret < 0)
+		goto err;
+
+	return ret;
+
+err:
+	mfd_remove_devices(max8998->dev);
+	kfree(max8998);
+	return ret;
+}
+
+static int max8998_i2c_remove(struct i2c_client *i2c)
+{
+	struct max8998_dev *max8998 = i2c_get_clientdata(i2c);
+
+	mfd_remove_devices(max8998->dev);
+	kfree(max8998);
+
+	return 0;
+}
+
+static const struct i2c_device_id max8998_i2c_id[] = {
+       { "max8998", 0 },
+       { }
+};
+MODULE_DEVICE_TABLE(i2c, max8998_i2c_id);
+
+static struct i2c_driver max8998_i2c_driver = {
+	.driver = {
+		   .name = "max8998",
+		   .owner = THIS_MODULE,
+	},
+	.probe = max8998_i2c_probe,
+	.remove = max8998_i2c_remove,
+	.id_table = max8998_i2c_id,
+};
+
+static int __init max8998_i2c_init(void)
+{
+	return i2c_add_driver(&max8998_i2c_driver);
+}
+/* init early so consumer devices can complete system boot */
+subsys_initcall(max8998_i2c_init);
+
+static void __exit max8998_i2c_exit(void)
+{
+	i2c_del_driver(&max8998_i2c_driver);
+}
+module_exit(max8998_i2c_exit);
+
+MODULE_DESCRIPTION("MAXIM 8998 multi-function core driver");
+MODULE_AUTHOR("Kyungmin Park <kyungmin.park@samsung.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 04f2e085116..172951bf23a 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -100,6 +100,14 @@ config REGULATOR_MAX8925
 	help
 	  Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC.
 
+config REGULATOR_MAX8998
+	tristate "Maxim 8998 voltage regulator"
+	depends on MFD_MAX8998
+	help
+	  This driver controls a Maxim 8998 voltage output regulator
+	  via I2C bus. The provided regulator is suitable for S3C6410
+	  and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
+
 config REGULATOR_TWL4030
 	bool "TI TWL4030/TWL5030/TWL6030/TPS695x0 PMIC"
 	depends on TWL4030_CORE
@@ -201,5 +209,31 @@ config REGULATOR_88PM8607
 	help
 	  This driver supports 88PM8607 voltage regulator chips.
 
+config REGULATOR_ISL6271A
+	tristate "Intersil ISL6271A Power regulator"
+	depends on I2C
+	help
+	  This driver supports ISL6271A voltage regulator chip.
+
+config REGULATOR_AD5398
+	tristate "Analog Devices AD5398/AD5821 regulators"
+	depends on I2C
+	help
+	  This driver supports AD5398 and AD5821 current regulator chips.
+	  If building into module, its name is ad5398.ko.
+
+config REGULATOR_AB8500
+	bool "ST-Ericsson AB8500 Power Regulators"
+	depends on AB8500_CORE
+	help
+	  This driver supports the regulators found on the ST-Ericsson mixed
+	  signal AB8500 PMIC
+
+config REGULATOR_TPS6586X
+	tristate "TI TPS6586X Power regulators"
+	depends on MFD_TPS6586X
+	help
+	  This driver supports TPS6586X voltage regulator chips.
+
 endif
 
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 4e7feece22d..8285fd832e1 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_REGULATOR_FIXED_VOLTAGE) += fixed.o
 obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o
 obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) += userspace-consumer.o
 
+obj-$(CONFIG_REGULATOR_AD5398) += ad5398.o
 obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o
 obj-$(CONFIG_REGULATOR_DUMMY) += dummy.o
 obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o
@@ -16,12 +17,14 @@ obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o
 obj-$(CONFIG_REGULATOR_MAX8649)	+= max8649.o
 obj-$(CONFIG_REGULATOR_MAX8660) += max8660.o
 obj-$(CONFIG_REGULATOR_MAX8925) += max8925-regulator.o
+obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o
 obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o
 obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o
 obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o
 obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o
 obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o
 obj-$(CONFIG_REGULATOR_WM8994) += wm8994-regulator.o
+obj-$(CONFIG_REGULATOR_TPS6586X) += tps6586x-regulator.o
 obj-$(CONFIG_REGULATOR_DA903X)	+= da903x.o
 obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
 obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o
@@ -31,5 +34,7 @@ obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o
 obj-$(CONFIG_REGULATOR_TPS65023) += tps65023-regulator.o
 obj-$(CONFIG_REGULATOR_TPS6507X) += tps6507x-regulator.o
 obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o
+obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o
+obj-$(CONFIG_REGULATOR_AB8500)	+= ab8500.o
 
 ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG
diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
new file mode 100644
index 00000000000..dc3f1a49167
--- /dev/null
+++ b/drivers/regulator/ab8500.c
@@ -0,0 +1,427 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * Author: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson
+ *
+ * AB8500 peripheral regulators
+ *
+ * AB8500 supports the following regulators,
+ * LDOs - VAUDIO, VANAMIC2/2, VDIGMIC, VINTCORE12, VTVOUT,
+ *        VAUX1/2/3, VANA
+ *
+ * for DB8500 cut 1.0 and previous versions of the silicon, all accesses
+ * to registers are through the DB8500 SPI. In cut 1.1 onwards, these
+ * accesses are through the DB8500 PRCMU I2C
+ *
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/ab8500.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/ab8500.h>
+
+/**
+ * struct ab8500_regulator_info - ab8500 regulator information
+ * @desc: regulator description
+ * @ab8500: ab8500 parent
+ * @regulator_dev: regulator device
+ * @max_uV: maximum voltage (for variable voltage supplies)
+ * @min_uV: minimum voltage (for variable voltage supplies)
+ * @fixed_uV: typical voltage (for fixed voltage supplies)
+ * @update_reg: register to control on/off
+ * @mask: mask to enable/disable regulator
+ * @enable: bits to enable the regulator in normal(high power) mode
+ * @voltage_reg: register to control regulator voltage
+ * @voltage_mask: mask to control regulator voltage
+ * @supported_voltages: supported voltage table
+ * @voltages_len: number of supported voltages for the regulator
+ */
+struct ab8500_regulator_info {
+	struct device		*dev;
+	struct regulator_desc	desc;
+	struct ab8500		*ab8500;
+	struct regulator_dev	*regulator;
+	int max_uV;
+	int min_uV;
+	int fixed_uV;
+	int update_reg;
+	int mask;
+	int enable;
+	int voltage_reg;
+	int voltage_mask;
+	int const *supported_voltages;
+	int voltages_len;
+};
+
+/* voltage tables for the vauxn/vintcore supplies */
+static const int ldo_vauxn_voltages[] = {
+	1100000,
+	1200000,
+	1300000,
+	1400000,
+	1500000,
+	1800000,
+	1850000,
+	1900000,
+	2500000,
+	2650000,
+	2700000,
+	2750000,
+	2800000,
+	2900000,
+	3000000,
+	3300000,
+};
+
+static const int ldo_vintcore_voltages[] = {
+	1200000,
+	1225000,
+	1250000,
+	1275000,
+	1300000,
+	1325000,
+	1350000,
+};
+
+static int ab8500_regulator_enable(struct regulator_dev *rdev)
+{
+	int regulator_id, ret;
+	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+
+	regulator_id = rdev_get_id(rdev);
+	if (regulator_id >= AB8500_NUM_REGULATORS)
+		return -EINVAL;
+
+	ret = ab8500_set_bits(info->ab8500, info->update_reg,
+			info->mask, info->enable);
+	if (ret < 0)
+		dev_err(rdev_get_dev(rdev),
+			"couldn't set enable bits for regulator\n");
+	return ret;
+}
+
+static int ab8500_regulator_disable(struct regulator_dev *rdev)
+{
+	int regulator_id, ret;
+	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+
+	regulator_id = rdev_get_id(rdev);
+	if (regulator_id >= AB8500_NUM_REGULATORS)
+		return -EINVAL;
+
+	ret = ab8500_set_bits(info->ab8500, info->update_reg,
+			info->mask, 0x0);
+	if (ret < 0)
+		dev_err(rdev_get_dev(rdev),
+			"couldn't set disable bits for regulator\n");
+	return ret;
+}
+
+static int ab8500_regulator_is_enabled(struct regulator_dev *rdev)
+{
+	int regulator_id, ret;
+	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+
+	regulator_id = rdev_get_id(rdev);
+	if (regulator_id >= AB8500_NUM_REGULATORS)
+		return -EINVAL;
+
+	ret = ab8500_read(info->ab8500, info->update_reg);
+	if (ret < 0) {
+		dev_err(rdev_get_dev(rdev),
+			"couldn't read 0x%x register\n", info->update_reg);
+		return ret;
+	}
+
+	if (ret & info->mask)
+		return true;
+	else
+		return false;
+}
+
+static int ab8500_list_voltage(struct regulator_dev *rdev, unsigned selector)
+{
+	int regulator_id;
+	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+
+	regulator_id = rdev_get_id(rdev);
+	if (regulator_id >= AB8500_NUM_REGULATORS)
+		return -EINVAL;
+
+	/* return the uV for the fixed regulators */
+	if (info->fixed_uV)
+		return info->fixed_uV;
+
+	if (selector > info->voltages_len)
+		return -EINVAL;
+
+	return info->supported_voltages[selector];
+}
+
+static int ab8500_regulator_get_voltage(struct regulator_dev *rdev)
+{
+	int regulator_id, ret, val;
+	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+
+	regulator_id = rdev_get_id(rdev);
+	if (regulator_id >= AB8500_NUM_REGULATORS)
+		return -EINVAL;
+
+	ret = ab8500_read(info->ab8500, info->voltage_reg);
+	if (ret < 0) {
+		dev_err(rdev_get_dev(rdev),
+			"couldn't read voltage reg for regulator\n");
+		return ret;
+	}
+
+	/* vintcore has a different layout */
+	val = ret & info->voltage_mask;
+	if (regulator_id == AB8500_LDO_INTCORE)
+		ret = info->supported_voltages[val >> 0x3];
+	else
+		ret = info->supported_voltages[val];
+
+	return ret;
+}
+
+static int ab8500_get_best_voltage_index(struct regulator_dev *rdev,
+		int min_uV, int max_uV)
+{
+	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+	int i;
+
+	/* check the supported voltage */
+	for (i = 0; i < info->voltages_len; i++) {
+		if ((info->supported_voltages[i] >= min_uV) &&
+		    (info->supported_voltages[i] <= max_uV))
+			return i;
+	}
+
+	return -EINVAL;
+}
+
+static int ab8500_regulator_set_voltage(struct regulator_dev *rdev,
+		int min_uV, int max_uV)
+{
+	int regulator_id, ret;
+	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+
+	regulator_id = rdev_get_id(rdev);
+	if (regulator_id >= AB8500_NUM_REGULATORS)
+		return -EINVAL;
+
+	/* get the appropriate voltages within the range */
+	ret = ab8500_get_best_voltage_index(rdev, min_uV, max_uV);
+	if (ret < 0) {
+		dev_err(rdev_get_dev(rdev),
+				"couldn't get best voltage for regulator\n");
+		return ret;
+	}
+
+	/* set the registers for the request */
+	ret = ab8500_set_bits(info->ab8500, info->voltage_reg,
+				info->voltage_mask, ret);
+	if (ret < 0)
+		dev_err(rdev_get_dev(rdev),
+		"couldn't set voltage reg for regulator\n");
+
+	return ret;
+}
+
+static struct regulator_ops ab8500_regulator_ops = {
+	.enable		= ab8500_regulator_enable,
+	.disable	= ab8500_regulator_disable,
+	.is_enabled	= ab8500_regulator_is_enabled,
+	.get_voltage	= ab8500_regulator_get_voltage,
+	.set_voltage	= ab8500_regulator_set_voltage,
+	.list_voltage	= ab8500_list_voltage,
+};
+
+static int ab8500_fixed_get_voltage(struct regulator_dev *rdev)
+{
+	int regulator_id;
+	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+
+	regulator_id = rdev_get_id(rdev);
+	if (regulator_id >= AB8500_NUM_REGULATORS)
+		return -EINVAL;
+
+	return info->fixed_uV;
+}
+
+static struct regulator_ops ab8500_ldo_fixed_ops = {
+	.enable		= ab8500_regulator_enable,
+	.disable	= ab8500_regulator_disable,
+	.is_enabled	= ab8500_regulator_is_enabled,
+	.get_voltage	= ab8500_fixed_get_voltage,
+	.list_voltage	= ab8500_list_voltage,
+};
+
+#define AB8500_LDO(_id, min, max, reg, reg_mask, reg_enable,	\
+		volt_reg, volt_mask, voltages,			\
+			len_volts)				\
+{								\
+	.desc	= {						\
+		.name	= "LDO-" #_id,				\
+		.ops	= &ab8500_regulator_ops,		\
+		.type	= REGULATOR_VOLTAGE,			\
+		.id	= AB8500_LDO_##_id,			\
+		.owner	= THIS_MODULE,				\
+	},							\
+	.min_uV		= (min) * 1000,				\
+	.max_uV		= (max) * 1000,				\
+	.update_reg	= reg,					\
+	.mask		= reg_mask,				\
+	.enable		= reg_enable,				\
+	.voltage_reg	= volt_reg,				\
+	.voltage_mask	= volt_mask,				\
+	.supported_voltages = voltages,				\
+	.voltages_len	= len_volts,				\
+	.fixed_uV	= 0,					\
+}
+
+#define AB8500_FIXED_LDO(_id, fixed, reg, reg_mask,	\
+				reg_enable)		\
+{							\
+	.desc	= {					\
+		.name	= "LDO-" #_id,			\
+		.ops	= &ab8500_ldo_fixed_ops,	\
+		.type	= REGULATOR_VOLTAGE,		\
+		.id	= AB8500_LDO_##_id,		\
+		.owner	= THIS_MODULE,			\
+	},						\
+	.fixed_uV	= fixed * 1000,			\
+	.update_reg	= reg,				\
+	.mask		= reg_mask,			\
+	.enable		= reg_enable,			\
+}
+
+static struct ab8500_regulator_info ab8500_regulator_info[] = {
+	/*
+	 * Variable Voltage LDOs
+	 * name, min uV, max uV, ctrl reg, reg mask, enable mask,
+	 *	volt ctrl reg, volt ctrl mask, volt table, num supported volts
+	 */
+	AB8500_LDO(AUX1, 1100, 3300, 0x0409, 0x3, 0x1, 0x041f, 0xf,
+			ldo_vauxn_voltages, ARRAY_SIZE(ldo_vauxn_voltages)),
+	AB8500_LDO(AUX2, 1100, 3300, 0x0409, 0xc, 0x4, 0x0420, 0xf,
+			ldo_vauxn_voltages, ARRAY_SIZE(ldo_vauxn_voltages)),
+	AB8500_LDO(AUX3, 1100, 3300, 0x040a, 0x3, 0x1, 0x0421, 0xf,
+			ldo_vauxn_voltages, ARRAY_SIZE(ldo_vauxn_voltages)),
+	AB8500_LDO(INTCORE, 1100, 3300, 0x0380, 0x4, 0x4, 0x0380, 0x38,
+		ldo_vintcore_voltages, ARRAY_SIZE(ldo_vintcore_voltages)),
+
+	/*
+	 * Fixed Voltage LDOs
+	 *		 name,	o/p uV, ctrl reg, enable, disable
+	 */
+	AB8500_FIXED_LDO(TVOUT,	  2000,   0x0380,   0x2,    0x2),
+	AB8500_FIXED_LDO(AUDIO,   2000,   0x0383,   0x2,    0x2),
+	AB8500_FIXED_LDO(ANAMIC1, 2050,   0x0383,   0x4,    0x4),
+	AB8500_FIXED_LDO(ANAMIC2, 2050,   0x0383,   0x8,    0x8),
+	AB8500_FIXED_LDO(DMIC,    1800,   0x0383,   0x10,   0x10),
+	AB8500_FIXED_LDO(ANA,     1200,   0x0383,   0xc,    0x4),
+};
+
+static inline struct ab8500_regulator_info *find_regulator_info(int id)
+{
+	struct ab8500_regulator_info *info;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(ab8500_regulator_info); i++) {
+		info = &ab8500_regulator_info[i];
+		if (info->desc.id == id)
+			return info;
+	}
+	return NULL;
+}
+
+static __devinit int ab8500_regulator_probe(struct platform_device *pdev)
+{
+	struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
+	struct ab8500_platform_data *pdata = dev_get_platdata(ab8500->dev);
+	int i, err;
+
+	if (!ab8500) {
+		dev_err(&pdev->dev, "null mfd parent\n");
+		return -EINVAL;
+	}
+
+	/* register all regulators */
+	for (i = 0; i < ARRAY_SIZE(ab8500_regulator_info); i++) {
+		struct ab8500_regulator_info *info = NULL;
+
+		/* assign per-regulator data */
+		info = &ab8500_regulator_info[i];
+		info->dev = &pdev->dev;
+		info->ab8500 = ab8500;
+
+		info->regulator = regulator_register(&info->desc, &pdev->dev,
+				pdata->regulator[i], info);
+		if (IS_ERR(info->regulator)) {
+			err = PTR_ERR(info->regulator);
+			dev_err(&pdev->dev, "failed to register regulator %s\n",
+					info->desc.name);
+			/* when we fail, un-register all earlier regulators */
+			i--;
+			while (i > 0) {
+				info = &ab8500_regulator_info[i];
+				regulator_unregister(info->regulator);
+				i--;
+			}
+			return err;
+		}
+	}
+
+	return 0;
+}
+
+static __devexit int ab8500_regulator_remove(struct platform_device *pdev)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(ab8500_regulator_info); i++) {
+		struct ab8500_regulator_info *info = NULL;
+		info = &ab8500_regulator_info[i];
+		regulator_unregister(info->regulator);
+	}
+
+	return 0;
+}
+
+static struct platform_driver ab8500_regulator_driver = {
+	.probe = ab8500_regulator_probe,
+	.remove = __devexit_p(ab8500_regulator_remove),
+	.driver         = {
+		.name   = "ab8500-regulator",
+		.owner  = THIS_MODULE,
+	},
+};
+
+static int __init ab8500_regulator_init(void)
+{
+	int ret;
+
+	ret = platform_driver_register(&ab8500_regulator_driver);
+	if (ret != 0)
+		pr_err("Failed to register ab8500 regulator: %d\n", ret);
+
+	return ret;
+}
+subsys_initcall(ab8500_regulator_init);
+
+static void __exit ab8500_regulator_exit(void)
+{
+	platform_driver_unregister(&ab8500_regulator_driver);
+}
+module_exit(ab8500_regulator_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Sundar Iyer <sundar.iyer@stericsson.com>");
+MODULE_DESCRIPTION("Regulator Driver for ST-Ericsson AB8500 Mixed-Sig PMIC");
+MODULE_ALIAS("platform:ab8500-regulator");
diff --git a/drivers/regulator/ad5398.c b/drivers/regulator/ad5398.c
new file mode 100644
index 00000000000..d59d2f2314a
--- /dev/null
+++ b/drivers/regulator/ad5398.c
@@ -0,0 +1,288 @@
+/*
+ * Voltage and current regulation for AD5398 and AD5821
+ *
+ * Copyright 2010 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+
+#define AD5398_CURRENT_EN_MASK	0x8000
+
+struct ad5398_chip_info {
+	struct i2c_client *client;
+	int min_uA;
+	int max_uA;
+	unsigned int current_level;
+	unsigned int current_mask;
+	unsigned int current_offset;
+	struct regulator_dev rdev;
+};
+
+static int ad5398_calc_current(struct ad5398_chip_info *chip,
+	unsigned selector)
+{
+	unsigned range_uA = chip->max_uA - chip->min_uA;
+
+	return chip->min_uA + (selector * range_uA / chip->current_level);
+}
+
+static int ad5398_read_reg(struct i2c_client *client, unsigned short *data)
+{
+	unsigned short val;
+	int ret;
+
+	ret = i2c_master_recv(client, (char *)&val, 2);
+	if (ret < 0) {
+		dev_err(&client->dev, "I2C read error\n");
+		return ret;
+	}
+	*data = be16_to_cpu(val);
+
+	return ret;
+}
+
+static int ad5398_write_reg(struct i2c_client *client, const unsigned short data)
+{
+	unsigned short val;
+	int ret;
+
+	val = cpu_to_be16(data);
+	ret = i2c_master_send(client, (char *)&val, 2);
+	if (ret < 0)
+		dev_err(&client->dev, "I2C write error\n");
+
+	return ret;
+}
+
+static int ad5398_get_current_limit(struct regulator_dev *rdev)
+{
+	struct ad5398_chip_info *chip = rdev_get_drvdata(rdev);
+	struct i2c_client *client = chip->client;
+	unsigned short data;
+	int ret;
+
+	ret = ad5398_read_reg(client, &data);
+	if (ret < 0)
+		return ret;
+
+	ret = (data & chip->current_mask) >> chip->current_offset;
+
+	return ad5398_calc_current(chip, ret);
+}
+
+static int ad5398_set_current_limit(struct regulator_dev *rdev, int min_uA, int max_uA)
+{
+	struct ad5398_chip_info *chip = rdev_get_drvdata(rdev);
+	struct i2c_client *client = chip->client;
+	unsigned range_uA = chip->max_uA - chip->min_uA;
+	unsigned selector;
+	unsigned short data;
+	int ret;
+
+	if (min_uA > chip->max_uA || min_uA < chip->min_uA)
+		return -EINVAL;
+	if (max_uA > chip->max_uA || max_uA < chip->min_uA)
+		return -EINVAL;
+
+	selector = ((min_uA - chip->min_uA) * chip->current_level +
+			range_uA - 1) / range_uA;
+	if (ad5398_calc_current(chip, selector) > max_uA)
+		return -EINVAL;
+
+	dev_dbg(&client->dev, "changing current %dmA\n",
+		ad5398_calc_current(chip, selector) / 1000);
+
+	/* read chip enable bit */
+	ret = ad5398_read_reg(client, &data);
+	if (ret < 0)
+		return ret;
+
+	/* prepare register data */
+	selector = (selector << chip->current_offset) & chip->current_mask;
+	data = (unsigned short)selector | (data & AD5398_CURRENT_EN_MASK);
+
+	/* write the new current value back as well as enable bit */
+	ret = ad5398_write_reg(client, data);
+
+	return ret;
+}
+
+static int ad5398_is_enabled(struct regulator_dev *rdev)
+{
+	struct ad5398_chip_info *chip = rdev_get_drvdata(rdev);
+	struct i2c_client *client = chip->client;
+	unsigned short data;
+	int ret;
+
+	ret = ad5398_read_reg(client, &data);
+	if (ret < 0)
+		return ret;
+
+	if (data & AD5398_CURRENT_EN_MASK)
+		return 1;
+	else
+		return 0;
+}
+
+static int ad5398_enable(struct regulator_dev *rdev)
+{
+	struct ad5398_chip_info *chip = rdev_get_drvdata(rdev);
+	struct i2c_client *client = chip->client;
+	unsigned short data;
+	int ret;
+
+	ret = ad5398_read_reg(client, &data);
+	if (ret < 0)
+		return ret;
+
+	if (data & AD5398_CURRENT_EN_MASK)
+		return 0;
+
+	data |= AD5398_CURRENT_EN_MASK;
+
+	ret = ad5398_write_reg(client, data);
+
+	return ret;
+}
+
+static int ad5398_disable(struct regulator_dev *rdev)
+{
+	struct ad5398_chip_info *chip = rdev_get_drvdata(rdev);
+	struct i2c_client *client = chip->client;
+	unsigned short data;
+	int ret;
+
+	ret = ad5398_read_reg(client, &data);
+	if (ret < 0)
+		return ret;
+
+	if (!(data & AD5398_CURRENT_EN_MASK))
+		return 0;
+
+	data &= ~AD5398_CURRENT_EN_MASK;
+
+	ret = ad5398_write_reg(client, data);
+
+	return ret;
+}
+
+static struct regulator_ops ad5398_ops = {
+	.get_current_limit = ad5398_get_current_limit,
+	.set_current_limit = ad5398_set_current_limit,
+	.enable = ad5398_enable,
+	.disable = ad5398_disable,
+	.is_enabled = ad5398_is_enabled,
+};
+
+static struct regulator_desc ad5398_reg = {
+	.name = "isink",
+	.id = 0,
+	.ops = &ad5398_ops,
+	.type = REGULATOR_CURRENT,
+	.owner = THIS_MODULE,
+};
+
+struct ad5398_current_data_format {
+	int current_bits;
+	int current_offset;
+	int min_uA;
+	int max_uA;
+};
+
+static const struct ad5398_current_data_format df_10_4_120 = {10, 4, 0, 120000};
+
+static const struct i2c_device_id ad5398_id[] = {
+	{ "ad5398", (kernel_ulong_t)&df_10_4_120 },
+	{ "ad5821", (kernel_ulong_t)&df_10_4_120 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ad5398_id);
+
+static int __devinit ad5398_probe(struct i2c_client *client,
+				const struct i2c_device_id *id)
+{
+	struct regulator_dev *rdev;
+	struct regulator_init_data *init_data = client->dev.platform_data;
+	struct ad5398_chip_info *chip;
+	const struct ad5398_current_data_format *df =
+			(struct ad5398_current_data_format *)id->driver_data;
+	int ret;
+
+	if (!init_data)
+		return -EINVAL;
+
+	chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->client = client;
+
+	chip->min_uA = df->min_uA;
+	chip->max_uA = df->max_uA;
+	chip->current_level = 1 << df->current_bits;
+	chip->current_offset = df->current_offset;
+	chip->current_mask = (chip->current_level - 1) << chip->current_offset;
+
+	rdev = regulator_register(&ad5398_reg, &client->dev, init_data, chip);
+	if (IS_ERR(rdev)) {
+		ret = PTR_ERR(rdev);
+		dev_err(&client->dev, "failed to register %s %s\n",
+			id->name, ad5398_reg.name);
+		goto err;
+	}
+
+	i2c_set_clientdata(client, chip);
+	dev_dbg(&client->dev, "%s regulator driver is registered.\n", id->name);
+	return 0;
+
+err:
+	kfree(chip);
+	return ret;
+}
+
+static int __devexit ad5398_remove(struct i2c_client *client)
+{
+	struct ad5398_chip_info *chip = i2c_get_clientdata(client);
+
+	regulator_unregister(&chip->rdev);
+	kfree(chip);
+	i2c_set_clientdata(client, NULL);
+
+	return 0;
+}
+
+static struct i2c_driver ad5398_driver = {
+	.probe = ad5398_probe,
+	.remove = __devexit_p(ad5398_remove),
+	.driver		= {
+		.name	= "ad5398",
+	},
+	.id_table	= ad5398_id,
+};
+
+static int __init ad5398_init(void)
+{
+	return i2c_add_driver(&ad5398_driver);
+}
+subsys_initcall(ad5398_init);
+
+static void __exit ad5398_exit(void)
+{
+	i2c_del_driver(&ad5398_driver);
+}
+module_exit(ad5398_exit);
+
+MODULE_DESCRIPTION("AD5398 and AD5821 current regulator driver");
+MODULE_AUTHOR("Sonic Zhang");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("i2c:ad5398-regulator");
diff --git a/drivers/regulator/isl6271a-regulator.c b/drivers/regulator/isl6271a-regulator.c
new file mode 100644
index 00000000000..e49d2bd393f
--- /dev/null
+++ b/drivers/regulator/isl6271a-regulator.c
@@ -0,0 +1,236 @@
+/*
+ * isl6271a-regulator.c
+ *
+ * Support for Intersil ISL6271A voltage regulator
+ *
+ * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
+ * whether express or implied; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+
+#define	ISL6271A_VOLTAGE_MIN	850000
+#define	ISL6271A_VOLTAGE_MAX	1600000
+#define	ISL6271A_VOLTAGE_STEP	50000
+
+/* PMIC details */
+struct isl_pmic {
+	struct i2c_client	*client;
+	struct regulator_dev	*rdev[3];
+	struct mutex		mtx;
+};
+
+static int isl6271a_get_voltage(struct regulator_dev *dev)
+{
+	struct isl_pmic *pmic = rdev_get_drvdata(dev);
+	int idx, data;
+
+	mutex_lock(&pmic->mtx);
+
+	idx = i2c_smbus_read_byte(pmic->client);
+	if (idx < 0) {
+		dev_err(&pmic->client->dev, "Error getting voltage\n");
+		data = idx;
+		goto out;
+	}
+
+	/* Convert the data from chip to microvolts */
+	data = ISL6271A_VOLTAGE_MIN + (ISL6271A_VOLTAGE_STEP * (idx & 0xf));
+
+out:
+	mutex_unlock(&pmic->mtx);
+	return data;
+}
+
+static int isl6271a_set_voltage(struct regulator_dev *dev, int minuV, int maxuV)
+{
+	struct isl_pmic *pmic = rdev_get_drvdata(dev);
+	int vsel, err, data;
+
+	if (minuV < ISL6271A_VOLTAGE_MIN || minuV > ISL6271A_VOLTAGE_MAX)
+		return -EINVAL;
+	if (maxuV < ISL6271A_VOLTAGE_MIN || maxuV > ISL6271A_VOLTAGE_MAX)
+		return -EINVAL;
+
+	/* Align to 50000 mV */
+	vsel = minuV - (minuV % ISL6271A_VOLTAGE_STEP);
+
+	/* If the result fell out of [minuV,maxuV] range, put it back */
+	if (vsel < minuV)
+		vsel += ISL6271A_VOLTAGE_STEP;
+
+	/* Convert the microvolts to data for the chip */
+	data = (vsel - ISL6271A_VOLTAGE_MIN) / ISL6271A_VOLTAGE_STEP;
+
+	mutex_lock(&pmic->mtx);
+
+	err = i2c_smbus_write_byte(pmic->client, data);
+	if (err < 0)
+		dev_err(&pmic->client->dev, "Error setting voltage\n");
+
+	mutex_unlock(&pmic->mtx);
+	return err;
+}
+
+static int isl6271a_list_voltage(struct regulator_dev *dev, unsigned selector)
+{
+	return ISL6271A_VOLTAGE_MIN + (ISL6271A_VOLTAGE_STEP * selector);
+}
+
+static struct regulator_ops isl_core_ops = {
+	.get_voltage	= isl6271a_get_voltage,
+	.set_voltage	= isl6271a_set_voltage,
+	.list_voltage	= isl6271a_list_voltage,
+};
+
+static int isl6271a_get_fixed_voltage(struct regulator_dev *dev)
+{
+	int id = rdev_get_id(dev);
+	return (id == 1) ? 1100000 : 1300000;
+}
+
+static int isl6271a_list_fixed_voltage(struct regulator_dev *dev, unsigned selector)
+{
+	int id = rdev_get_id(dev);
+	return (id == 1) ? 1100000 : 1300000;
+}
+
+static struct regulator_ops isl_fixed_ops = {
+	.get_voltage	= isl6271a_get_fixed_voltage,
+	.list_voltage	= isl6271a_list_fixed_voltage,
+};
+
+static struct regulator_desc isl_rd[] = {
+	{
+		.name		= "Core Buck",
+		.id		= 0,
+		.n_voltages	= 16,
+		.ops		= &isl_core_ops,
+		.type		= REGULATOR_VOLTAGE,
+		.owner		= THIS_MODULE,
+	}, {
+		.name		= "LDO1",
+		.id		= 1,
+		.n_voltages	= 1,
+		.ops		= &isl_fixed_ops,
+		.type		= REGULATOR_VOLTAGE,
+		.owner		= THIS_MODULE,
+	}, {
+		.name		= "LDO2",
+		.id		= 2,
+		.n_voltages	= 1,
+		.ops		= &isl_fixed_ops,
+		.type		= REGULATOR_VOLTAGE,
+		.owner		= THIS_MODULE,
+	},
+};
+
+static int __devinit isl6271a_probe(struct i2c_client *i2c,
+				     const struct i2c_device_id *id)
+{
+	struct regulator_init_data *init_data	= i2c->dev.platform_data;
+	struct isl_pmic *pmic;
+	int err, i;
+
+	if (!i2c_check_functionality(i2c->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -EIO;
+
+	if (!init_data) {
+		dev_err(&i2c->dev, "no platform data supplied\n");
+		return -EIO;
+	}
+
+	pmic = kzalloc(sizeof(struct isl_pmic), GFP_KERNEL);
+	if (!pmic)
+		return -ENOMEM;
+
+	pmic->client = i2c;
+
+	mutex_init(&pmic->mtx);
+
+	for (i = 0; i < 3; i++) {
+		pmic->rdev[i] = regulator_register(&isl_rd[0], &i2c->dev,
+						init_data, pmic);
+		if (IS_ERR(pmic->rdev[i])) {
+			dev_err(&i2c->dev, "failed to register %s\n", id->name);
+			err = PTR_ERR(pmic->rdev);
+			goto error;
+		}
+	}
+
+	i2c_set_clientdata(i2c, pmic);
+
+	return 0;
+
+error:
+	while (--i >= 0)
+		regulator_unregister(pmic->rdev[i]);
+
+	kfree(pmic);
+	return err;
+}
+
+static int __devexit isl6271a_remove(struct i2c_client *i2c)
+{
+	struct isl_pmic *pmic = i2c_get_clientdata(i2c);
+	int i;
+
+	i2c_set_clientdata(i2c, NULL);
+
+	for (i = 0; i < 3; i++)
+		regulator_unregister(pmic->rdev[i]);
+
+	kfree(pmic);
+
+	return 0;
+}
+
+static const struct i2c_device_id isl6271a_id[] = {
+	{.name = "isl6271a", 0 },
+	{ },
+};
+
+MODULE_DEVICE_TABLE(i2c, isl6271a_id);
+
+static struct i2c_driver isl6271a_i2c_driver = {
+	.driver = {
+		.name = "isl6271a",
+		.owner = THIS_MODULE,
+	},
+	.probe = isl6271a_probe,
+	.remove = __devexit_p(isl6271a_remove),
+	.id_table = isl6271a_id,
+};
+
+static int __init isl6271a_init(void)
+{
+	return i2c_add_driver(&isl6271a_i2c_driver);
+}
+
+static void __exit isl6271a_cleanup(void)
+{
+	i2c_del_driver(&isl6271a_i2c_driver);
+}
+
+subsys_initcall(isl6271a_init);
+module_exit(isl6271a_cleanup);
+
+MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("Intersil ISL6271A voltage regulator driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/regulator/lp3971.c b/drivers/regulator/lp3971.c
index 8ae3732eb24..3bb82b624e1 100644
--- a/drivers/regulator/lp3971.c
+++ b/drivers/regulator/lp3971.c
@@ -377,7 +377,7 @@ static int lp3971_i2c_read(struct i2c_client *i2c, char reg, int count,
 	if (count != 1)
 		return -EIO;
 	ret = i2c_smbus_read_byte_data(i2c, reg);
-	if (ret < 0 || count != 1)
+	if (ret < 0)
 		return -EIO;
 
 	*dest = ret;
@@ -387,15 +387,9 @@ static int lp3971_i2c_read(struct i2c_client *i2c, char reg, int count,
 static int lp3971_i2c_write(struct i2c_client *i2c, char reg, int count,
 	const u16 *src)
 {
-	int ret;
-
 	if (count != 1)
 		return -EIO;
-	ret = i2c_smbus_write_byte_data(i2c, reg, *src);
-	if (ret >= 0)
-		return 0;
-
-	return ret;
+	return i2c_smbus_write_byte_data(i2c, reg, *src);
 }
 
 static u8 lp3971_reg_read(struct lp3971 *lp3971, u8 reg)
diff --git a/drivers/regulator/max1586.c b/drivers/regulator/max1586.c
index 2b54d9d75f1..8867c2710a6 100644
--- a/drivers/regulator/max1586.c
+++ b/drivers/regulator/max1586.c
@@ -223,7 +223,7 @@ static int __devinit max1586_pmic_probe(struct i2c_client *client,
 		}
 	}
 
-	i2c_set_clientdata(client, rdev);
+	i2c_set_clientdata(client, max1586);
 	dev_info(&client->dev, "Maxim 1586 regulator driver loaded\n");
 	return 0;
 
@@ -238,13 +238,13 @@ out:
 
 static int __devexit max1586_pmic_remove(struct i2c_client *client)
 {
-	struct regulator_dev **rdev = i2c_get_clientdata(client);
+	struct max1586_data *max1586 = i2c_get_clientdata(client);
 	int i;
 
 	for (i = 0; i <= MAX1586_V6; i++)
-		if (rdev[i])
-			regulator_unregister(rdev[i]);
-	kfree(rdev);
+		if (max1586->rdev[i])
+			regulator_unregister(max1586->rdev[i]);
+	kfree(max1586);
 
 	return 0;
 }
diff --git a/drivers/regulator/max8660.c b/drivers/regulator/max8660.c
index d97220efae5..c570e6eb0db 100644
--- a/drivers/regulator/max8660.c
+++ b/drivers/regulator/max8660.c
@@ -450,7 +450,7 @@ static int __devinit max8660_probe(struct i2c_client *client,
 		}
 	}
 
-	i2c_set_clientdata(client, rdev);
+	i2c_set_clientdata(client, max8660);
 	dev_info(&client->dev, "Maxim 8660/8661 regulator driver loaded\n");
 	return 0;
 
@@ -465,13 +465,13 @@ out:
 
 static int __devexit max8660_remove(struct i2c_client *client)
 {
-	struct regulator_dev **rdev = i2c_get_clientdata(client);
+	struct max8660 *max8660 = i2c_get_clientdata(client);
 	int i;
 
 	for (i = 0; i < MAX8660_V_END; i++)
-		if (rdev[i])
-			regulator_unregister(rdev[i]);
-	kfree(rdev);
+		if (max8660->rdev[i])
+			regulator_unregister(max8660->rdev[i]);
+	kfree(max8660);
 
 	return 0;
 }
diff --git a/drivers/regulator/max8998.c b/drivers/regulator/max8998.c
new file mode 100644
index 00000000000..ab67298799f
--- /dev/null
+++ b/drivers/regulator/max8998.c
@@ -0,0 +1,635 @@
+/*
+ * max8998.c - Voltage regulator driver for the Maxim 8998
+ *
+ *  Copyright (C) 2009-2010 Samsung Electronics
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *  Marek Szyprowski <m.szyprowski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/mfd/max8998.h>
+#include <linux/mfd/max8998-private.h>
+
+struct max8998_data {
+	struct device		*dev;
+	struct max8998_dev	*iodev;
+	int			num_regulators;
+	struct regulator_dev	**rdev;
+};
+
+struct voltage_map_desc {
+	int min;
+	int max;
+	int step;
+};
+
+/* Voltage maps */
+static const struct voltage_map_desc ldo23_voltage_map_desc = {
+	.min = 800,	.step = 50,	.max = 1300,
+};
+static const struct voltage_map_desc ldo456711_voltage_map_desc = {
+	.min = 1600,	.step = 100,	.max = 3600,
+};
+static const struct voltage_map_desc ldo8_voltage_map_desc = {
+	.min = 3000,	.step = 100,	.max = 3600,
+};
+static const struct voltage_map_desc ldo9_voltage_map_desc = {
+	.min = 2800,	.step = 100,	.max = 3100,
+};
+static const struct voltage_map_desc ldo10_voltage_map_desc = {
+	.min = 950,	.step = 50,	.max = 1300,
+};
+static const struct voltage_map_desc ldo1213_voltage_map_desc = {
+	.min = 800,	.step = 100,	.max = 3300,
+};
+static const struct voltage_map_desc ldo1415_voltage_map_desc = {
+	.min = 1200,	.step = 100,	.max = 3300,
+};
+static const struct voltage_map_desc ldo1617_voltage_map_desc = {
+	.min = 1600,	.step = 100,	.max = 3600,
+};
+static const struct voltage_map_desc buck12_voltage_map_desc = {
+	.min = 750,	.step = 25,	.max = 1525,
+};
+static const struct voltage_map_desc buck3_voltage_map_desc = {
+	.min = 1600,	.step = 100,	.max = 3600,
+};
+static const struct voltage_map_desc buck4_voltage_map_desc = {
+	.min = 800,	.step = 100,	.max = 2300,
+};
+
+static const struct voltage_map_desc *ldo_voltage_map[] = {
+	NULL,
+	NULL,
+	&ldo23_voltage_map_desc,	/* LDO2 */
+	&ldo23_voltage_map_desc,	/* LDO3 */
+	&ldo456711_voltage_map_desc,	/* LDO4 */
+	&ldo456711_voltage_map_desc,	/* LDO5 */
+	&ldo456711_voltage_map_desc,	/* LDO6 */
+	&ldo456711_voltage_map_desc,	/* LDO7 */
+	&ldo8_voltage_map_desc,		/* LDO8 */
+	&ldo9_voltage_map_desc,		/* LDO9 */
+	&ldo10_voltage_map_desc,	/* LDO10 */
+	&ldo456711_voltage_map_desc,	/* LDO11 */
+	&ldo1213_voltage_map_desc,	/* LDO12 */
+	&ldo1213_voltage_map_desc,	/* LDO13 */
+	&ldo1415_voltage_map_desc,	/* LDO14 */
+	&ldo1415_voltage_map_desc,	/* LDO15 */
+	&ldo1617_voltage_map_desc,	/* LDO16 */
+	&ldo1617_voltage_map_desc,	/* LDO17 */
+	&buck12_voltage_map_desc,	/* BUCK1 */
+	&buck12_voltage_map_desc,	/* BUCK2 */
+	&buck3_voltage_map_desc,	/* BUCK3 */
+	&buck4_voltage_map_desc,	/* BUCK4 */
+};
+
+static inline int max8998_get_ldo(struct regulator_dev *rdev)
+{
+	return rdev_get_id(rdev);
+}
+
+static int max8998_list_voltage(struct regulator_dev *rdev,
+				unsigned int selector)
+{
+	const struct voltage_map_desc *desc;
+	int ldo = max8998_get_ldo(rdev);
+	int val;
+
+	if (ldo >= ARRAY_SIZE(ldo_voltage_map))
+		return -EINVAL;
+
+	desc = ldo_voltage_map[ldo];
+	if (desc == NULL)
+		return -EINVAL;
+
+	val = desc->min + desc->step * selector;
+	if (val > desc->max)
+		return -EINVAL;
+
+	return val * 1000;
+}
+
+static int max8998_get_enable_register(struct regulator_dev *rdev,
+					int *reg, int *shift)
+{
+	int ldo = max8998_get_ldo(rdev);
+
+	switch (ldo) {
+	case MAX8998_LDO2 ... MAX8998_LDO5:
+		*reg = MAX8998_REG_ONOFF1;
+		*shift = 3 - (ldo - MAX8998_LDO2);
+		break;
+	case MAX8998_LDO6 ... MAX8998_LDO13:
+		*reg = MAX8998_REG_ONOFF2;
+		*shift = 7 - (ldo - MAX8998_LDO6);
+		break;
+	case MAX8998_LDO14 ... MAX8998_LDO17:
+		*reg = MAX8998_REG_ONOFF3;
+		*shift = 7 - (ldo - MAX8998_LDO14);
+		break;
+	case MAX8998_BUCK1 ... MAX8998_BUCK4:
+		*reg = MAX8998_REG_ONOFF1;
+		*shift = 7 - (ldo - MAX8998_BUCK1);
+		break;
+	case MAX8998_EN32KHZ_AP ... MAX8998_ENVICHG:
+		*reg = MAX8998_REG_ONOFF4;
+		*shift = 7 - (ldo - MAX8998_EN32KHZ_AP);
+		break;
+	case MAX8998_ESAFEOUT1 ... MAX8998_ESAFEOUT2:
+		*reg = MAX8998_REG_CHGR2;
+		*shift = 7 - (ldo - MAX8998_ESAFEOUT1);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int max8998_ldo_is_enabled(struct regulator_dev *rdev)
+{
+	struct max8998_data *max8998 = rdev_get_drvdata(rdev);
+	int ret, reg, shift = 8;
+	u8 val;
+
+	ret = max8998_get_enable_register(rdev, &reg, &shift);
+	if (ret)
+		return ret;
+
+	ret = max8998_read_reg(max8998->iodev, reg, &val);
+	if (ret)
+		return ret;
+
+	return val & (1 << shift);
+}
+
+static int max8998_ldo_enable(struct regulator_dev *rdev)
+{
+	struct max8998_data *max8998 = rdev_get_drvdata(rdev);
+	int reg, shift = 8, ret;
+
+	ret = max8998_get_enable_register(rdev, &reg, &shift);
+	if (ret)
+		return ret;
+
+	return max8998_update_reg(max8998->iodev, reg, 1<<shift, 1<<shift);
+}
+
+static int max8998_ldo_disable(struct regulator_dev *rdev)
+{
+	struct max8998_data *max8998 = rdev_get_drvdata(rdev);
+	int reg, shift = 8, ret;
+
+	ret = max8998_get_enable_register(rdev, &reg, &shift);
+	if (ret)
+		return ret;
+
+	return max8998_update_reg(max8998->iodev, reg, 0, 1<<shift);
+}
+
+static int max8998_get_voltage_register(struct regulator_dev *rdev,
+				int *_reg, int *_shift, int *_mask)
+{
+	int ldo = max8998_get_ldo(rdev);
+	int reg, shift = 0, mask = 0xff;
+
+	switch (ldo) {
+	case MAX8998_LDO2 ... MAX8998_LDO3:
+		reg = MAX8998_REG_LDO2_LDO3;
+		mask = 0xf;
+		if (ldo == MAX8998_LDO2)
+			shift = 4;
+		else
+			shift = 0;
+		break;
+	case MAX8998_LDO4 ... MAX8998_LDO7:
+		reg = MAX8998_REG_LDO4 + (ldo - MAX8998_LDO4);
+		break;
+	case MAX8998_LDO8 ... MAX8998_LDO9:
+		reg = MAX8998_REG_LDO8_LDO9;
+		mask = 0xf;
+		if (ldo == MAX8998_LDO8)
+			shift = 4;
+		else
+			shift = 0;
+		break;
+	case MAX8998_LDO10 ... MAX8998_LDO11:
+		reg = MAX8998_REG_LDO10_LDO11;
+		if (ldo == MAX8998_LDO10) {
+			shift = 5;
+			mask = 0x7;
+		} else {
+			shift = 0;
+			mask = 0x1f;
+		}
+		break;
+	case MAX8998_LDO12 ... MAX8998_LDO17:
+		reg = MAX8998_REG_LDO12 + (ldo - MAX8998_LDO12);
+		break;
+	case MAX8998_BUCK1:
+		reg = MAX8998_REG_BUCK1_DVSARM1;
+		break;
+	case MAX8998_BUCK2:
+		reg = MAX8998_REG_BUCK2_DVSINT1;
+		break;
+	case MAX8998_BUCK3:
+		reg = MAX8998_REG_BUCK3;
+		break;
+	case MAX8998_BUCK4:
+		reg = MAX8998_REG_BUCK4;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	*_reg = reg;
+	*_shift = shift;
+	*_mask = mask;
+
+	return 0;
+}
+
+static int max8998_get_voltage(struct regulator_dev *rdev)
+{
+	struct max8998_data *max8998 = rdev_get_drvdata(rdev);
+	int reg, shift = 0, mask, ret;
+	u8 val;
+
+	ret = max8998_get_voltage_register(rdev, &reg, &shift, &mask);
+	if (ret)
+		return ret;
+
+	ret = max8998_read_reg(max8998->iodev, reg, &val);
+	if (ret)
+		return ret;
+
+	val >>= shift;
+	val &= mask;
+
+	return max8998_list_voltage(rdev, val);
+}
+
+static int max8998_set_voltage(struct regulator_dev *rdev,
+				int min_uV, int max_uV)
+{
+	struct max8998_data *max8998 = rdev_get_drvdata(rdev);
+	int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
+	int previous_vol = 0;
+	const struct voltage_map_desc *desc;
+	int ldo = max8998_get_ldo(rdev);
+	int reg, shift = 0, mask, ret;
+	int i = 0;
+	u8 val;
+	bool en_ramp = false;
+
+	if (ldo >= ARRAY_SIZE(ldo_voltage_map))
+		return -EINVAL;
+
+	desc = ldo_voltage_map[ldo];
+	if (desc == NULL)
+		return -EINVAL;
+
+	if (max_vol < desc->min || min_vol > desc->max)
+		return -EINVAL;
+
+	while (desc->min + desc->step*i < min_vol &&
+	       desc->min + desc->step*i < desc->max)
+		i++;
+
+	if (desc->min + desc->step*i > max_vol)
+		return -EINVAL;
+
+	ret = max8998_get_voltage_register(rdev, &reg, &shift, &mask);
+	if (ret)
+		return ret;
+
+	/* wait for RAMP_UP_DELAY if rdev is BUCK1/2 and
+	 * ENRAMP is ON */
+	if (ldo == MAX8998_BUCK1 || ldo == MAX8998_BUCK2) {
+		max8998_read_reg(max8998->iodev, MAX8998_REG_ONOFF4, &val);
+		if (val & (1 << 4)) {
+			en_ramp = true;
+			previous_vol = max8998_get_voltage(rdev);
+		}
+	}
+
+	ret = max8998_update_reg(max8998->iodev, reg, i<<shift, mask<<shift);
+
+	if (en_ramp == true) {
+		int difference = desc->min + desc->step*i - previous_vol/1000;
+		if (difference > 0)
+			udelay(difference / ((val & 0x0f) + 1));
+	}
+
+	return ret;
+}
+
+static struct regulator_ops max8998_ldo_ops = {
+	.list_voltage		= max8998_list_voltage,
+	.is_enabled		= max8998_ldo_is_enabled,
+	.enable			= max8998_ldo_enable,
+	.disable		= max8998_ldo_disable,
+	.get_voltage		= max8998_get_voltage,
+	.set_voltage		= max8998_set_voltage,
+	.set_suspend_enable	= max8998_ldo_enable,
+	.set_suspend_disable	= max8998_ldo_disable,
+};
+
+static struct regulator_ops max8998_buck_ops = {
+	.list_voltage		= max8998_list_voltage,
+	.is_enabled		= max8998_ldo_is_enabled,
+	.enable			= max8998_ldo_enable,
+	.disable		= max8998_ldo_disable,
+	.get_voltage		= max8998_get_voltage,
+	.set_voltage		= max8998_set_voltage,
+	.set_suspend_enable	= max8998_ldo_enable,
+	.set_suspend_disable	= max8998_ldo_disable,
+};
+
+static struct regulator_ops max8998_others_ops = {
+	.is_enabled		= max8998_ldo_is_enabled,
+	.enable			= max8998_ldo_enable,
+	.disable		= max8998_ldo_disable,
+	.set_suspend_enable	= max8998_ldo_enable,
+	.set_suspend_disable	= max8998_ldo_disable,
+};
+
+static struct regulator_desc regulators[] = {
+	{
+		.name		= "LDO2",
+		.id		= MAX8998_LDO2,
+		.ops		= &max8998_ldo_ops,
+		.type		= REGULATOR_VOLTAGE,
+		.owner		= THIS_MODULE,
+	}, {
+		.name		= "LDO3",
+		.id		= MAX8998_LDO3,
+		.ops		= &max8998_ldo_ops,
+		.type		= REGULATOR_VOLTAGE,
+		.owner		= THIS_MODULE,
+	}, {
+		.name		= "LDO4",
+		.id		= MAX8998_LDO4,
+		.ops		= &max8998_ldo_ops,
+		.type		= REGULATOR_VOLTAGE,
+		.owner		= THIS_MODULE,
+	}, {
+		.name		= "LDO5",
+		.id		= MAX8998_LDO5,
+		.ops		= &max8998_ldo_ops,
+		.type		= REGULATOR_VOLTAGE,
+		.owner		= THIS_MODULE,
+	}, {
+		.name		= "LDO6",
+		.id		= MAX8998_LDO6,
+		.ops		= &max8998_ldo_ops,
+		.type		= REGULATOR_VOLTAGE,
+		.owner		= THIS_MODULE,
+	}, {
+		.name		= "LDO7",
+		.id		= MAX8998_LDO7,
+		.ops		= &max8998_ldo_ops,
+		.type		= REGULATOR_VOLTAGE,
+		.owner		= THIS_MODULE,
+	}, {
+		.name		= "LDO8",
+		.id		= MAX8998_LDO8,
+		.ops		= &max8998_ldo_ops,
+		.type		= REGULATOR_VOLTAGE,
+		.owner		= THIS_MODULE,
+	}, {
+		.name		= "LDO9",
+		.id		= MAX8998_LDO9,
+		.ops		= &max8998_ldo_ops,
+		.type		= REGULATOR_VOLTAGE,
+		.owner		= THIS_MODULE,
+	}, {
+		.name		= "LDO10",
+		.id		= MAX8998_LDO10,
+		.ops		= &max8998_ldo_ops,
+		.type		= REGULATOR_VOLTAGE,
+		.owner		= THIS_MODULE,
+	}, {
+		.name		= "LDO11",
+		.id		= MAX8998_LDO11,
+		.ops		= &max8998_ldo_ops,
+		.type		= REGULATOR_VOLTAGE,
+		.owner		= THIS_MODULE,
+	}, {
+		.name		= "LDO12",
+		.id		= MAX8998_LDO12,
+		.ops		= &max8998_ldo_ops,
+		.type		= REGULATOR_VOLTAGE,
+		.owner		= THIS_MODULE,
+	}, {
+		.name		= "LDO13",
+		.id		= MAX8998_LDO13,
+		.ops		= &max8998_ldo_ops,
+		.type		= REGULATOR_VOLTAGE,
+		.owner		= THIS_MODULE,
+	}, {
+		.name		= "LDO14",
+		.id		= MAX8998_LDO14,
+		.ops		= &max8998_ldo_ops,
+		.type		= REGULATOR_VOLTAGE,
+		.owner		= THIS_MODULE,
+	}, {
+		.name		= "LDO15",
+		.id		= MAX8998_LDO15,
+		.ops		= &max8998_ldo_ops,
+		.type		= REGULATOR_VOLTAGE,
+		.owner		= THIS_MODULE,
+	}, {
+		.name		= "LDO16",
+		.id		= MAX8998_LDO16,
+		.ops		= &max8998_ldo_ops,
+		.type		= REGULATOR_VOLTAGE,
+		.owner		= THIS_MODULE,
+	}, {
+		.name		= "LDO17",
+		.id		= MAX8998_LDO17,
+		.ops		= &max8998_ldo_ops,
+		.type		= REGULATOR_VOLTAGE,
+		.owner		= THIS_MODULE,
+	}, {
+		.name		= "BUCK1",
+		.id		= MAX8998_BUCK1,
+		.ops		= &max8998_buck_ops,
+		.type		= REGULATOR_VOLTAGE,
+		.owner		= THIS_MODULE,
+	}, {
+		.name		= "BUCK2",
+		.id		= MAX8998_BUCK2,
+		.ops		= &max8998_buck_ops,
+		.type		= REGULATOR_VOLTAGE,
+		.owner		= THIS_MODULE,
+	}, {
+		.name		= "BUCK3",
+		.id		= MAX8998_BUCK3,
+		.ops		= &max8998_buck_ops,
+		.type		= REGULATOR_VOLTAGE,
+		.owner		= THIS_MODULE,
+	}, {
+		.name		= "BUCK4",
+		.id		= MAX8998_BUCK4,
+		.ops		= &max8998_buck_ops,
+		.type		= REGULATOR_VOLTAGE,
+		.owner		= THIS_MODULE,
+	}, {
+		.name		= "EN32KHz AP",
+		.id		= MAX8998_EN32KHZ_AP,
+		.ops		= &max8998_others_ops,
+		.type		= REGULATOR_VOLTAGE,
+		.owner		= THIS_MODULE,
+	}, {
+		.name		= "EN32KHz CP",
+		.id		= MAX8998_EN32KHZ_CP,
+		.ops		= &max8998_others_ops,
+		.type		= REGULATOR_VOLTAGE,
+		.owner		= THIS_MODULE,
+	}, {
+		.name		= "ENVICHG",
+		.id		= MAX8998_ENVICHG,
+		.ops		= &max8998_others_ops,
+		.type		= REGULATOR_VOLTAGE,
+		.owner		= THIS_MODULE,
+	}, {
+		.name		= "ESAFEOUT1",
+		.id		= MAX8998_ESAFEOUT1,
+		.ops		= &max8998_others_ops,
+		.type		= REGULATOR_VOLTAGE,
+		.owner		= THIS_MODULE,
+	}, {
+		.name		= "ESAFEOUT2",
+		.id		= MAX8998_ESAFEOUT2,
+		.ops		= &max8998_others_ops,
+		.type		= REGULATOR_VOLTAGE,
+		.owner		= THIS_MODULE,
+	}
+};
+
+static __devinit int max8998_pmic_probe(struct platform_device *pdev)
+{
+	struct max8998_dev *iodev = dev_get_drvdata(pdev->dev.parent);
+	struct max8998_platform_data *pdata = dev_get_platdata(iodev->dev);
+	struct regulator_dev **rdev;
+	struct max8998_data *max8998;
+	int i, ret, size;
+
+	if (!pdata) {
+		dev_err(pdev->dev.parent, "No platform init data supplied\n");
+		return -ENODEV;
+	}
+
+	max8998 = kzalloc(sizeof(struct max8998_data), GFP_KERNEL);
+	if (!max8998)
+		return -ENOMEM;
+
+	size = sizeof(struct regulator_dev *) * (pdata->num_regulators + 1);
+	max8998->rdev = kzalloc(size, GFP_KERNEL);
+	if (!max8998->rdev) {
+		kfree(max8998);
+		return -ENOMEM;
+	}
+
+	rdev = max8998->rdev;
+	max8998->iodev = iodev;
+	platform_set_drvdata(pdev, max8998);
+
+	for (i = 0; i < pdata->num_regulators; i++) {
+		const struct voltage_map_desc *desc;
+		int id = pdata->regulators[i].id;
+		int index = id - MAX8998_LDO2;
+
+		desc = ldo_voltage_map[id];
+		if (desc && regulators[index].ops != &max8998_others_ops) {
+			int count = (desc->max - desc->min) / desc->step + 1;
+			regulators[index].n_voltages = count;
+		}
+		rdev[i] = regulator_register(&regulators[index], max8998->dev,
+				pdata->regulators[i].initdata, max8998);
+		if (IS_ERR(rdev[i])) {
+			ret = PTR_ERR(rdev[i]);
+			dev_err(max8998->dev, "regulator init failed\n");
+			rdev[i] = NULL;
+			goto err;
+		}
+	}
+
+
+	return 0;
+err:
+	for (i = 0; i <= max8998->num_regulators; i++)
+		if (rdev[i])
+			regulator_unregister(rdev[i]);
+
+	kfree(max8998->rdev);
+	kfree(max8998);
+
+	return ret;
+}
+
+static int __devexit max8998_pmic_remove(struct platform_device *pdev)
+{
+	struct max8998_data *max8998 = platform_get_drvdata(pdev);
+	struct regulator_dev **rdev = max8998->rdev;
+	int i;
+
+	for (i = 0; i <= max8998->num_regulators; i++)
+		if (rdev[i])
+			regulator_unregister(rdev[i]);
+
+	kfree(max8998->rdev);
+	kfree(max8998);
+
+	return 0;
+}
+
+static struct platform_driver max8998_pmic_driver = {
+	.driver = {
+		.name = "max8998-pmic",
+		.owner = THIS_MODULE,
+	},
+	.probe = max8998_pmic_probe,
+	.remove = __devexit_p(max8998_pmic_remove),
+};
+
+static int __init max8998_pmic_init(void)
+{
+	return platform_driver_register(&max8998_pmic_driver);
+}
+subsys_initcall(max8998_pmic_init);
+
+static void __exit max8998_pmic_cleanup(void)
+{
+	platform_driver_unregister(&max8998_pmic_driver);
+}
+module_exit(max8998_pmic_cleanup);
+
+MODULE_DESCRIPTION("MAXIM 8998 voltage regulator driver");
+MODULE_AUTHOR("Kyungmin Park <kyungmin.park@samsung.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/regulator/tps65023-regulator.c b/drivers/regulator/tps65023-regulator.c
index f50afc9f287..cd6d4fc9d74 100644
--- a/drivers/regulator/tps65023-regulator.c
+++ b/drivers/regulator/tps65023-regulator.c
@@ -585,6 +585,8 @@ static const struct tps_info tps65023_regs[] = {
 static const struct i2c_device_id tps_65023_id[] = {
 	{.name = "tps65023",
 	.driver_data = (unsigned long) tps65023_regs,},
+	{.name = "tps65021",
+	.driver_data = (unsigned long) tps65023_regs,},
 	{ },
 };
 
diff --git a/drivers/regulator/tps6507x-regulator.c b/drivers/regulator/tps6507x-regulator.c
index 8152d65220f..c239f42aa4a 100644
--- a/drivers/regulator/tps6507x-regulator.c
+++ b/drivers/regulator/tps6507x-regulator.c
@@ -614,6 +614,7 @@ int tps6507x_pmic_probe(struct platform_device *pdev)
 	}
 
 	tps6507x_dev->pmic = tps;
+	platform_set_drvdata(pdev, tps6507x_dev);
 
 	return 0;
 
diff --git a/drivers/regulator/tps6586x-regulator.c b/drivers/regulator/tps6586x-regulator.c
new file mode 100644
index 00000000000..8cff1413a14
--- /dev/null
+++ b/drivers/regulator/tps6586x-regulator.c
@@ -0,0 +1,396 @@
+/*
+ * Regulator driver for TI TPS6586x
+ *
+ * Copyright (C) 2010 Compulab Ltd.
+ * Author: Mike Rapoport <mike@compulab.co.il>
+ *
+ * Based on da903x
+ * Copyright (C) 2006-2008 Marvell International Ltd.
+ * Copyright (C) 2008 Compulab Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/tps6586x.h>
+
+/* supply control and voltage setting  */
+#define TPS6586X_SUPPLYENA	0x10
+#define TPS6586X_SUPPLYENB	0x11
+#define TPS6586X_SUPPLYENC	0x12
+#define TPS6586X_SUPPLYEND	0x13
+#define TPS6586X_SUPPLYENE	0x14
+#define TPS6586X_VCC1		0x20
+#define TPS6586X_VCC2		0x21
+#define TPS6586X_SM1V1		0x23
+#define TPS6586X_SM1V2		0x24
+#define TPS6586X_SM1SL		0x25
+#define TPS6586X_SM0V1		0x26
+#define TPS6586X_SM0V2		0x27
+#define TPS6586X_SM0SL		0x28
+#define TPS6586X_LDO2AV1	0x29
+#define TPS6586X_LDO2AV2	0x2A
+#define TPS6586X_LDO2BV1	0x2F
+#define TPS6586X_LDO2BV2	0x30
+#define TPS6586X_LDO4V1		0x32
+#define TPS6586X_LDO4V2		0x33
+
+/* converter settings  */
+#define TPS6586X_SUPPLYV1	0x41
+#define TPS6586X_SUPPLYV2	0x42
+#define TPS6586X_SUPPLYV3	0x43
+#define TPS6586X_SUPPLYV4	0x44
+#define TPS6586X_SUPPLYV5	0x45
+#define TPS6586X_SUPPLYV6	0x46
+#define TPS6586X_SMODE1		0x47
+#define TPS6586X_SMODE2		0x48
+
+struct tps6586x_regulator {
+	struct regulator_desc desc;
+
+	int volt_reg;
+	int volt_shift;
+	int volt_nbits;
+	int enable_bit[2];
+	int enable_reg[2];
+
+	int *voltages;
+
+	/* for DVM regulators */
+	int go_reg;
+	int go_bit;
+};
+
+static inline struct device *to_tps6586x_dev(struct regulator_dev *rdev)
+{
+	return rdev_get_dev(rdev)->parent->parent;
+}
+
+static int tps6586x_ldo_list_voltage(struct regulator_dev *rdev,
+				     unsigned selector)
+{
+	struct tps6586x_regulator *info = rdev_get_drvdata(rdev);
+
+	return info->voltages[selector] * 1000;
+}
+
+
+static int __tps6586x_ldo_set_voltage(struct device *parent,
+				      struct tps6586x_regulator *ri,
+				      int min_uV, int max_uV)
+{
+	int val, uV;
+	uint8_t mask;
+
+	for (val = 0; val < ri->desc.n_voltages; val++) {
+		uV = ri->voltages[val] * 1000;
+
+		/* LDO0 has minimal voltage 1.2 rather than 1.25 */
+		if (ri->desc.id == TPS6586X_ID_LDO_0 && val == 0)
+			uV -= 50 * 1000;
+
+		/* use the first in-range value */
+		if (min_uV <= uV && uV <= max_uV) {
+
+			val <<= ri->volt_shift;
+			mask = ((1 << ri->volt_nbits) - 1) << ri->volt_shift;
+
+			return tps6586x_update(parent, ri->volt_reg, val, mask);
+		}
+	}
+
+	return -EINVAL;
+}
+
+static int tps6586x_ldo_set_voltage(struct regulator_dev *rdev,
+				    int min_uV, int max_uV)
+{
+	struct tps6586x_regulator *ri = rdev_get_drvdata(rdev);
+	struct device *parent = to_tps6586x_dev(rdev);
+
+	return __tps6586x_ldo_set_voltage(parent, ri, min_uV, max_uV);
+}
+
+static int tps6586x_ldo_get_voltage(struct regulator_dev *rdev)
+{
+	struct tps6586x_regulator *ri = rdev_get_drvdata(rdev);
+	struct device *parent = to_tps6586x_dev(rdev);
+	uint8_t val, mask;
+	int ret;
+
+	ret = tps6586x_read(parent, ri->volt_reg, &val);
+	if (ret)
+		return ret;
+
+	mask = ((1 << ri->volt_nbits) - 1) << ri->volt_shift;
+	val = (val & mask) >> ri->volt_shift;
+
+	if (val > ri->desc.n_voltages)
+		BUG();
+
+	return ri->voltages[val] * 1000;
+}
+
+static int tps6586x_dvm_set_voltage(struct regulator_dev *rdev,
+				    int min_uV, int max_uV)
+{
+	struct tps6586x_regulator *ri = rdev_get_drvdata(rdev);
+	struct device *parent = to_tps6586x_dev(rdev);
+	int ret;
+
+	ret = __tps6586x_ldo_set_voltage(parent, ri, min_uV, max_uV);
+	if (ret)
+		return ret;
+
+	return tps6586x_set_bits(parent, ri->go_reg, ri->go_bit);
+}
+
+static int tps6586x_regulator_enable(struct regulator_dev *rdev)
+{
+	struct tps6586x_regulator *ri = rdev_get_drvdata(rdev);
+	struct device *parent = to_tps6586x_dev(rdev);
+
+	return tps6586x_set_bits(parent, ri->enable_reg[0],
+				 1 << ri->enable_bit[0]);
+}
+
+static int tps6586x_regulator_disable(struct regulator_dev *rdev)
+{
+	struct tps6586x_regulator *ri = rdev_get_drvdata(rdev);
+	struct device *parent = to_tps6586x_dev(rdev);
+
+	return tps6586x_clr_bits(parent, ri->enable_reg[0],
+				 1 << ri->enable_bit[0]);
+}
+
+static int tps6586x_regulator_is_enabled(struct regulator_dev *rdev)
+{
+	struct tps6586x_regulator *ri = rdev_get_drvdata(rdev);
+	struct device *parent = to_tps6586x_dev(rdev);
+	uint8_t reg_val;
+	int ret;
+
+	ret = tps6586x_read(parent, ri->enable_reg[0], &reg_val);
+	if (ret)
+		return ret;
+
+	return !!(reg_val & (1 << ri->enable_bit[0]));
+}
+
+static struct regulator_ops tps6586x_regulator_ldo_ops = {
+	.list_voltage = tps6586x_ldo_list_voltage,
+	.get_voltage = tps6586x_ldo_get_voltage,
+	.set_voltage = tps6586x_ldo_set_voltage,
+
+	.is_enabled = tps6586x_regulator_is_enabled,
+	.enable = tps6586x_regulator_enable,
+	.disable = tps6586x_regulator_disable,
+};
+
+static struct regulator_ops tps6586x_regulator_dvm_ops = {
+	.list_voltage = tps6586x_ldo_list_voltage,
+	.get_voltage = tps6586x_ldo_get_voltage,
+	.set_voltage = tps6586x_dvm_set_voltage,
+
+	.is_enabled = tps6586x_regulator_is_enabled,
+	.enable = tps6586x_regulator_enable,
+	.disable = tps6586x_regulator_disable,
+};
+
+static int tps6586x_ldo_voltages[] = {
+	1250, 1500, 1800, 2500, 2700, 2850, 3100, 3300,
+};
+
+static int tps6586x_ldo4_voltages[] = {
+	1700, 1725, 1750, 1775, 1800, 1825, 1850, 1875,
+	1900, 1925, 1950, 1975, 2000, 2025, 2050, 2075,
+	2100, 2125, 2150, 2175, 2200, 2225, 2250, 2275,
+	2300, 2325, 2350, 2375, 2400, 2425, 2450, 2475,
+};
+
+static int tps6586x_sm2_voltages[] = {
+	3000, 3050, 3100, 3150, 3200, 3250, 3300, 3350,
+	3400, 3450, 3500, 3550, 3600, 3650, 3700, 3750,
+	3800, 3850, 3900, 3950, 4000, 4050, 4100, 4150,
+	4200, 4250, 4300, 4350, 4400, 4450, 4500, 4550,
+};
+
+static int tps6586x_dvm_voltages[] = {
+	 725,  750,  775,  800,  825,  850,  875,  900,
+	 925,  950,  975, 1000, 1025, 1050, 1075, 1100,
+	1125, 1150, 1175, 1200, 1225, 1250, 1275, 1300,
+	1325, 1350, 1375, 1400, 1425, 1450, 1475, 1500,
+};
+
+#define TPS6586X_REGULATOR(_id, vdata, _ops, vreg, shift, nbits,	\
+			   ereg0, ebit0, ereg1, ebit1, goreg, gobit)	\
+{									\
+	.desc	= {							\
+		.name	= "REG-" #_id,					\
+		.ops	= &tps6586x_regulator_##_ops,			\
+		.type	= REGULATOR_VOLTAGE,				\
+		.id	= TPS6586X_ID_##_id,				\
+		.n_voltages = ARRAY_SIZE(tps6586x_##vdata##_voltages),	\
+		.owner	= THIS_MODULE,					\
+	},								\
+	.volt_reg	= TPS6586X_##vreg,				\
+	.volt_shift	= (shift),					\
+	.volt_nbits	= (nbits),					\
+	.enable_reg[0]	= TPS6586X_SUPPLY##ereg0,			\
+	.enable_bit[0]	= (ebit0),					\
+	.enable_reg[1]	= TPS6586X_SUPPLY##ereg1,			\
+	.enable_bit[1]	= (ebit1),					\
+	.voltages	= tps6586x_##vdata##_voltages,			\
+}
+
+#define TPS6586X_LDO(_id, vdata, vreg, shift, nbits,			\
+		     ereg0, ebit0, ereg1, ebit1)			\
+	TPS6586X_REGULATOR(_id, vdata, ldo_ops, vreg, shift, nbits,	\
+			   ereg0, ebit0, ereg1, ebit1, 0, 0)
+
+#define TPS6586X_DVM(_id, vdata, vreg, shift, nbits,			\
+		     ereg0, ebit0, ereg1, ebit1, goreg, gobit)		\
+	TPS6586X_REGULATOR(_id, vdata, dvm_ops, vreg, shift, nbits,	\
+			   ereg0, ebit0, ereg1, ebit1, goreg, gobit)
+
+static struct tps6586x_regulator tps6586x_regulator[] = {
+	TPS6586X_LDO(LDO_0, ldo, SUPPLYV1, 5, 3, ENC, 0, END, 0),
+	TPS6586X_LDO(LDO_3, ldo, SUPPLYV4, 0, 3, ENC, 2, END, 2),
+	TPS6586X_LDO(LDO_5, ldo, SUPPLYV6, 0, 3, ENE, 6, ENE, 6),
+	TPS6586X_LDO(LDO_6, ldo, SUPPLYV3, 0, 3, ENC, 4, END, 4),
+	TPS6586X_LDO(LDO_7, ldo, SUPPLYV3, 3, 3, ENC, 5, END, 5),
+	TPS6586X_LDO(LDO_8, ldo, SUPPLYV1, 5, 3, ENC, 6, END, 6),
+	TPS6586X_LDO(LDO_9, ldo, SUPPLYV6, 3, 3, ENE, 7, ENE, 7),
+	TPS6586X_LDO(LDO_RTC, ldo, SUPPLYV4, 3, 3, ENE, 7, ENE, 7),
+	TPS6586X_LDO(LDO_1, dvm, SUPPLYV1, 0, 5, ENC, 1, END, 1),
+	TPS6586X_LDO(SM_2, sm2, SUPPLYV2, 0, 5, ENC, 1, END, 1),
+
+	TPS6586X_DVM(LDO_2, dvm, LDO2BV1, 0, 5, ENA, 3, ENB, 3, VCC2, 6),
+	TPS6586X_DVM(LDO_4, ldo4, LDO4V1, 0, 5, ENC, 3, END, 3, VCC1, 6),
+	TPS6586X_DVM(SM_0, dvm, SM0V1, 0, 5, ENA, 1, ENB, 1, VCC1, 2),
+	TPS6586X_DVM(SM_1, dvm, SM1V1, 0, 5, ENA, 0, ENB, 0, VCC1, 0),
+};
+
+/*
+ * TPS6586X has 2 enable bits that are OR'ed to determine the actual
+ * regulator state. Clearing one of this bits allows switching
+ * regulator on and of with single register write.
+ */
+static inline int tps6586x_regulator_preinit(struct device *parent,
+					     struct tps6586x_regulator *ri)
+{
+	uint8_t val1, val2;
+	int ret;
+
+	ret = tps6586x_read(parent, ri->enable_reg[0], &val1);
+	if (ret)
+		return ret;
+
+	ret = tps6586x_read(parent, ri->enable_reg[1], &val2);
+	if (ret)
+		return ret;
+
+	if (!(val2 & ri->enable_bit[1]))
+		return 0;
+
+	/*
+	 * The regulator is on, but it's enabled with the bit we don't
+	 * want to use, so we switch the enable bits
+	 */
+	if (!(val1 & ri->enable_bit[0])) {
+		ret = tps6586x_set_bits(parent, ri->enable_reg[0],
+					1 << ri->enable_bit[0]);
+		if (ret)
+			return ret;
+	}
+
+	return tps6586x_clr_bits(parent, ri->enable_reg[1],
+				 1 << ri->enable_bit[1]);
+}
+
+static inline struct tps6586x_regulator *find_regulator_info(int id)
+{
+	struct tps6586x_regulator *ri;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(tps6586x_regulator); i++) {
+		ri = &tps6586x_regulator[i];
+		if (ri->desc.id == id)
+			return ri;
+	}
+	return NULL;
+}
+
+static int __devinit tps6586x_regulator_probe(struct platform_device *pdev)
+{
+	struct tps6586x_regulator *ri = NULL;
+	struct regulator_dev *rdev;
+	int id = pdev->id;
+	int err;
+
+	dev_dbg(&pdev->dev, "Probing reulator %d\n", id);
+
+	ri = find_regulator_info(id);
+	if (ri == NULL) {
+		dev_err(&pdev->dev, "invalid regulator ID specified\n");
+		return -EINVAL;
+	}
+
+	err = tps6586x_regulator_preinit(pdev->dev.parent, ri);
+	if (err)
+		return err;
+
+	rdev = regulator_register(&ri->desc, &pdev->dev,
+				  pdev->dev.platform_data, ri);
+	if (IS_ERR(rdev)) {
+		dev_err(&pdev->dev, "failed to register regulator %s\n",
+				ri->desc.name);
+		return PTR_ERR(rdev);
+	}
+
+	platform_set_drvdata(pdev, rdev);
+
+	return 0;
+}
+
+static int __devexit tps6586x_regulator_remove(struct platform_device *pdev)
+{
+	struct regulator_dev *rdev = platform_get_drvdata(pdev);
+
+	regulator_unregister(rdev);
+	return 0;
+}
+
+static struct platform_driver tps6586x_regulator_driver = {
+	.driver	= {
+		.name	= "tps6586x-regulator",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= tps6586x_regulator_probe,
+	.remove		= __devexit_p(tps6586x_regulator_remove),
+};
+
+static int __init tps6586x_regulator_init(void)
+{
+	return platform_driver_register(&tps6586x_regulator_driver);
+}
+subsys_initcall(tps6586x_regulator_init);
+
+static void __exit tps6586x_regulator_exit(void)
+{
+	platform_driver_unregister(&tps6586x_regulator_driver);
+}
+module_exit(tps6586x_regulator_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mike Rapoport <mike@compulab.co.il>");
+MODULE_DESCRIPTION("Regulator Driver for TI TPS6586X PMIC");
+MODULE_ALIAS("platform:tps6586x-regulator");
diff --git a/drivers/regulator/wm8994-regulator.c b/drivers/regulator/wm8994-regulator.c
index 5a1dc8a24d3..03713bc66e4 100644
--- a/drivers/regulator/wm8994-regulator.c
+++ b/drivers/regulator/wm8994-regulator.c
@@ -219,8 +219,6 @@ static __devinit int wm8994_ldo_probe(struct platform_device *pdev)
 
 	ldo->wm8994 = wm8994;
 
-	ldo->is_enabled = true;
-
 	if (pdata->ldo[id].enable && gpio_is_valid(pdata->ldo[id].enable)) {
 		ldo->enable = pdata->ldo[id].enable;
 
@@ -237,7 +235,8 @@ static __devinit int wm8994_ldo_probe(struct platform_device *pdev)
 				ret);
 			goto err_gpio;
 		}
-	}
+	} else
+		ldo->is_enabled = true;
 
 	ldo->regulator = regulator_register(&wm8994_ldo_desc[id], &pdev->dev,
 					     pdata->ldo[id].init_data, ldo);
diff --git a/include/linux/mfd/ab8500.h b/include/linux/mfd/ab8500.h
index b63ff3ba335..f5cec4500f3 100644
--- a/include/linux/mfd/ab8500.h
+++ b/include/linux/mfd/ab8500.h
@@ -76,6 +76,8 @@
 #define AB8500_NR_IRQS			104
 #define AB8500_NUM_IRQ_REGS		13
 
+#define AB8500_NUM_REGULATORS   15
+
 /**
  * struct ab8500 - ab8500 internal structure
  * @dev: parent device
@@ -108,14 +110,18 @@ struct ab8500 {
 	u8 oldmask[AB8500_NUM_IRQ_REGS];
 };
 
+struct regulator_init_data;
+
 /**
  * struct ab8500_platform_data - AB8500 platform data
  * @irq_base: start of AB8500 IRQs, AB8500_NR_IRQS will be used
  * @init: board-specific initialization after detection of ab8500
+ * @regulator: machine-specific constraints for regulators
  */
 struct ab8500_platform_data {
 	int irq_base;
 	void (*init) (struct ab8500 *);
+	struct regulator_init_data *regulator[AB8500_NUM_REGULATORS];
 };
 
 extern int ab8500_write(struct ab8500 *a8500, u16 addr, u8 data);
diff --git a/include/linux/mfd/max8998-private.h b/include/linux/mfd/max8998-private.h
new file mode 100644
index 00000000000..6dc75b3e2d3
--- /dev/null
+++ b/include/linux/mfd/max8998-private.h
@@ -0,0 +1,112 @@
+/*
+ * max8698.h - Voltage regulator driver for the Maxim 8998
+ *
+ *  Copyright (C) 2009-2010 Samsung Electrnoics
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *  Marek Szyprowski <m.szyprowski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __LINUX_MFD_MAX8998_PRIV_H
+#define __LINUX_MFD_MAX8998_PRIV_H
+
+/* MAX 8998 registers */
+enum {
+	MAX8998_REG_IRQ1,
+	MAX8998_REG_IRQ2,
+	MAX8998_REG_IRQ3,
+	MAX8998_REG_IRQ4,
+	MAX8998_REG_IRQM1,
+	MAX8998_REG_IRQM2,
+	MAX8998_REG_IRQM3,
+	MAX8998_REG_IRQM4,
+	MAX8998_REG_STATUS1,
+	MAX8998_REG_STATUS2,
+	MAX8998_REG_STATUSM1,
+	MAX8998_REG_STATUSM2,
+	MAX8998_REG_CHGR1,
+	MAX8998_REG_CHGR2,
+	MAX8998_REG_LDO_ACTIVE_DISCHARGE1,
+	MAX8998_REG_LDO_ACTIVE_DISCHARGE2,
+	MAX8998_REG_BUCK_ACTIVE_DISCHARGE3,
+	MAX8998_REG_ONOFF1,
+	MAX8998_REG_ONOFF2,
+	MAX8998_REG_ONOFF3,
+	MAX8998_REG_ONOFF4,
+	MAX8998_REG_BUCK1_DVSARM1,
+	MAX8998_REG_BUCK1_DVSARM2,
+	MAX8998_REG_BUCK1_DVSARM3,
+	MAX8998_REG_BUCK1_DVSARM4,
+	MAX8998_REG_BUCK2_DVSINT1,
+	MAX8998_REG_BUCK2_DVSINT2,
+	MAX8998_REG_BUCK3,
+	MAX8998_REG_BUCK4,
+	MAX8998_REG_LDO2_LDO3,
+	MAX8998_REG_LDO4,
+	MAX8998_REG_LDO5,
+	MAX8998_REG_LDO6,
+	MAX8998_REG_LDO7,
+	MAX8998_REG_LDO8_LDO9,
+	MAX8998_REG_LDO10_LDO11,
+	MAX8998_REG_LDO12,
+	MAX8998_REG_LDO13,
+	MAX8998_REG_LDO14,
+	MAX8998_REG_LDO15,
+	MAX8998_REG_LDO16,
+	MAX8998_REG_LDO17,
+	MAX8998_REG_BKCHR,
+	MAX8998_REG_LBCNFG1,
+	MAX8998_REG_LBCNFG2,
+};
+
+/**
+ * struct max8998_dev - max8998 master device for sub-drivers
+ * @dev: master device of the chip (can be used to access platform data)
+ * @i2c_client: i2c client private data
+ * @dev_read():	chip register read function
+ * @dev_write(): chip register write function
+ * @dev_update(): chip register update function
+ * @iolock: mutex for serializing io access
+ */
+
+struct max8998_dev {
+	struct device *dev;
+	struct i2c_client *i2c_client;
+	int (*dev_read)(struct max8998_dev *max8998, u8 reg, u8 *dest);
+	int (*dev_write)(struct max8998_dev *max8998, u8 reg, u8 val);
+	int (*dev_update)(struct max8998_dev *max8998, u8 reg, u8 val, u8 mask);
+	struct mutex iolock;
+};
+
+static inline int max8998_read_reg(struct max8998_dev *max8998, u8 reg,
+				   u8 *value)
+{
+	return max8998->dev_read(max8998, reg, value);
+}
+
+static inline int max8998_write_reg(struct max8998_dev *max8998, u8 reg,
+				    u8 value)
+{
+	return max8998->dev_write(max8998, reg, value);
+}
+
+static inline int max8998_update_reg(struct max8998_dev *max8998, u8 reg,
+				     u8 value, u8 mask)
+{
+	return max8998->dev_update(max8998, reg, value, mask);
+}
+
+#endif /*  __LINUX_MFD_MAX8998_PRIV_H */
diff --git a/include/linux/mfd/max8998.h b/include/linux/mfd/max8998.h
new file mode 100644
index 00000000000..1d3601a2d85
--- /dev/null
+++ b/include/linux/mfd/max8998.h
@@ -0,0 +1,78 @@
+/*
+ * max8698.h - Voltage regulator driver for the Maxim 8998
+ *
+ *  Copyright (C) 2009-2010 Samsung Electrnoics
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *  Marek Szyprowski <m.szyprowski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __LINUX_MFD_MAX8998_H
+#define __LINUX_MFD_MAX8998_H
+
+#include <linux/regulator/machine.h>
+
+/* MAX 8998 regulator ids */
+enum {
+	MAX8998_LDO2 = 2,
+	MAX8998_LDO3,
+	MAX8998_LDO4,
+	MAX8998_LDO5,
+	MAX8998_LDO6,
+	MAX8998_LDO7,
+	MAX8998_LDO8,
+	MAX8998_LDO9,
+	MAX8998_LDO10,
+	MAX8998_LDO11,
+	MAX8998_LDO12,
+	MAX8998_LDO13,
+	MAX8998_LDO14,
+	MAX8998_LDO15,
+	MAX8998_LDO16,
+	MAX8998_LDO17,
+	MAX8998_BUCK1,
+	MAX8998_BUCK2,
+	MAX8998_BUCK3,
+	MAX8998_BUCK4,
+	MAX8998_EN32KHZ_AP,
+	MAX8998_EN32KHZ_CP,
+	MAX8998_ENVICHG,
+	MAX8998_ESAFEOUT1,
+	MAX8998_ESAFEOUT2,
+};
+
+/**
+ * max8998_regulator_data - regulator data
+ * @id: regulator id
+ * @initdata: regulator init data (contraints, supplies, ...)
+ */
+struct max8998_regulator_data {
+	int				id;
+	struct regulator_init_data	*initdata;
+};
+
+/**
+ * struct max8998_board - packages regulator init data
+ * @num_regulators: number of regultors used
+ * @regulators: array of defined regulators
+ */
+
+struct max8998_platform_data {
+	int				num_regulators;
+	struct max8998_regulator_data	*regulators;
+};
+
+#endif /*  __LINUX_MFD_MAX8998_H */
diff --git a/include/linux/regulator/ab8500.h b/include/linux/regulator/ab8500.h
new file mode 100644
index 00000000000..f509877c2ed
--- /dev/null
+++ b/include/linux/regulator/ab8500.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * Author: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson
+ *
+ */
+
+#ifndef __LINUX_MFD_AB8500_REGULATOR_H
+#define __LINUX_MFD_AB8500_REGULATOR_H
+
+/* AB8500 regulators */
+#define AB8500_LDO_AUX1         0
+#define AB8500_LDO_AUX2         1
+#define AB8500_LDO_AUX3         2
+#define AB8500_LDO_INTCORE      3
+#define AB8500_LDO_TVOUT        4
+#define AB8500_LDO_AUDIO	5
+#define AB8500_LDO_ANAMIC1      6
+#define AB8500_LDO_ANAMIC2      7
+#define AB8500_LDO_DMIC         8
+#define AB8500_LDO_ANA          9
+
+#endif