Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (46 commits)
  [media] rc: call input_sync after scancode reports
  [media] imon: allow either proto on unknown 0xffdc
  [media] imon: auto-config ffdc 7e device
  [media] saa7134: fix raw IR timeout value
  [media] rc: fix ghost keypresses with certain hw
  [media] [staging] lirc_serial: allocate irq at init time
  [media] lirc_zilog: fix spinning rx thread
  [media] keymaps: fix table for pinnacle pctv hd devices
  [media] ite-cir: 8709 needs to use pnp resource 2
  [media] V4L: mx1-camera: fix uninitialized variable
  [media] omap_vout: Added check in reqbuf & mmap for buf_size allocation
  [media] OMAP_VOUT: Change hardcoded device node number to -1
  [media] OMAP_VOUTLIB: Fix wrong resizer calculation
  [media] uvcvideo: Disable the queue when failing to start
  [media] uvcvideo: Remove buffers from the queues when freeing
  [media] uvcvideo: Ignore entities for terminals with no supported format
  [media] v4l: Don't access media entity after is has been destroyed
  [media] media: omap3isp: fix a potential NULL deref
  [media] media: vb2: fix allocation failure check
  [media] media: vb2: reset queued_count value during queue reinitialization
  ...

Fix up trivial conflict in MAINTAINERS as per Mauro

40 files changed, 471 insertions, 493 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index ae563fad227..584bdb2fe54 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6733,6 +6733,7 @@ F:	fs/fat/
 VIDEOBUF2 FRAMEWORK
 M:	Pawel Osciak <pawel@osciak.com>
 M:	Marek Szyprowski <m.szyprowski@samsung.com>
+M:	Kyungmin Park <kyungmin.park@samsung.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 F:	drivers/media/video/videobuf2-*
diff --git a/drivers/media/rc/fintek-cir.c b/drivers/media/rc/fintek-cir.c
index 8fa539dde1b..7f7079b12f2 100644
--- a/drivers/media/rc/fintek-cir.c
+++ b/drivers/media/rc/fintek-cir.c
@@ -597,12 +597,17 @@ static void __devexit fintek_remove(struct pnp_dev *pdev)
 static int fintek_suspend(struct pnp_dev *pdev, pm_message_t state)
 {
 	struct fintek_dev *fintek = pnp_get_drvdata(pdev);
+	unsigned long flags;
 
 	fit_dbg("%s called", __func__);
 
+	spin_lock_irqsave(&fintek->fintek_lock, flags);
+
 	/* disable all CIR interrupts */
 	fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_MASK, CIR_STATUS);
 
+	spin_unlock_irqrestore(&fintek->fintek_lock, flags);
+
 	fintek_config_mode_enable(fintek);
 
 	/* disable cir logical dev */
diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c
index 3f3c7071626..6bc35eeb653 100644
--- a/drivers/media/rc/imon.c
+++ b/drivers/media/rc/imon.c
@@ -307,6 +307,14 @@ static const struct {
 	/* 0xffdc iMON MCE VFD */
 	{ 0x00010000ffffffeell, KEY_VOLUMEUP },
 	{ 0x01000000ffffffeell, KEY_VOLUMEDOWN },
+	{ 0x00000001ffffffeell, KEY_MUTE },
+	{ 0x0000000fffffffeell, KEY_MEDIA },
+	{ 0x00000012ffffffeell, KEY_UP },
+	{ 0x00000013ffffffeell, KEY_DOWN },
+	{ 0x00000014ffffffeell, KEY_LEFT },
+	{ 0x00000015ffffffeell, KEY_RIGHT },
+	{ 0x00000016ffffffeell, KEY_ENTER },
+	{ 0x00000017ffffffeell, KEY_ESC },
 	/* iMON Knob values */
 	{ 0x000100ffffffffeell, KEY_VOLUMEUP },
 	{ 0x010000ffffffffeell, KEY_VOLUMEDOWN },
@@ -1582,16 +1590,16 @@ static void imon_incoming_packet(struct imon_context *ictx,
 	/* Only panel type events left to process now */
 	spin_lock_irqsave(&ictx->kc_lock, flags);
 
+	do_gettimeofday(&t);
 	/* KEY_MUTE repeats from knob need to be suppressed */
 	if (ictx->kc == KEY_MUTE && ictx->kc == ictx->last_keycode) {
-		do_gettimeofday(&t);
 		msec = tv2int(&t, &prev_time);
-		prev_time = t;
 		if (msec < ictx->idev->rep[REP_DELAY]) {
 			spin_unlock_irqrestore(&ictx->kc_lock, flags);
 			return;
 		}
 	}
+	prev_time = t;
 	kc = ictx->kc;
 
 	spin_unlock_irqrestore(&ictx->kc_lock, flags);
@@ -1603,7 +1611,9 @@ static void imon_incoming_packet(struct imon_context *ictx,
 	input_report_key(ictx->idev, kc, 0);
 	input_sync(ictx->idev);
 
+	spin_lock_irqsave(&ictx->kc_lock, flags);
 	ictx->last_keycode = kc;
+	spin_unlock_irqrestore(&ictx->kc_lock, flags);
 
 	return;
 
@@ -1740,6 +1750,8 @@ static void imon_get_ffdc_type(struct imon_context *ictx)
 		detected_display_type = IMON_DISPLAY_TYPE_VFD;
 		break;
 	/* iMON VFD, MCE IR */
+	case 0x46:
+	case 0x7e:
 	case 0x9e:
 		dev_info(ictx->dev, "0xffdc iMON VFD, MCE IR");
 		detected_display_type = IMON_DISPLAY_TYPE_VFD;
@@ -1755,6 +1767,9 @@ static void imon_get_ffdc_type(struct imon_context *ictx)
 		dev_info(ictx->dev, "Unknown 0xffdc device, "
 			 "defaulting to VFD and iMON IR");
 		detected_display_type = IMON_DISPLAY_TYPE_VFD;
+		/* We don't know which one it is, allow user to set the
+		 * RC6 one from userspace if OTHER wasn't correct. */
+		allowed_protos |= RC_TYPE_RC6;
 		break;
 	}
 
diff --git a/drivers/media/rc/ir-raw.c b/drivers/media/rc/ir-raw.c
index 11c19d8d0ee..423ed45d6c5 100644
--- a/drivers/media/rc/ir-raw.c
+++ b/drivers/media/rc/ir-raw.c
@@ -114,18 +114,20 @@ int ir_raw_event_store_edge(struct rc_dev *dev, enum raw_event_type type)
 	s64			delta; /* ns */
 	DEFINE_IR_RAW_EVENT(ev);
 	int			rc = 0;
+	int			delay;
 
 	if (!dev->raw)
 		return -EINVAL;
 
 	now = ktime_get();
 	delta = ktime_to_ns(ktime_sub(now, dev->raw->last_event));
+	delay = MS_TO_NS(dev->input_dev->rep[REP_DELAY]);
 
 	/* Check for a long duration since last event or if we're
 	 * being called for the first time, note that delta can't
 	 * possibly be negative.
 	 */
-	if (delta > IR_MAX_DURATION || !dev->raw->last_type)
+	if (delta > delay || !dev->raw->last_type)
 		type |= IR_START_EVENT;
 	else
 		ev.duration = delta;
diff --git a/drivers/media/rc/ite-cir.c b/drivers/media/rc/ite-cir.c
index e716b931cf7..ecd3d028076 100644
--- a/drivers/media/rc/ite-cir.c
+++ b/drivers/media/rc/ite-cir.c
@@ -1347,6 +1347,7 @@ static const struct ite_dev_params ite_dev_descs[] = {
 	{	/* 0: ITE8704 */
 	       .model = "ITE8704 CIR transceiver",
 	       .io_region_size = IT87_IOREG_LENGTH,
+	       .io_rsrc_no = 0,
 	       .hw_tx_capable = true,
 	       .sample_period = (u32) (1000000000ULL / 115200),
 	       .tx_carrier_freq = 38000,
@@ -1371,6 +1372,7 @@ static const struct ite_dev_params ite_dev_descs[] = {
 	{	/* 1: ITE8713 */
 	       .model = "ITE8713 CIR transceiver",
 	       .io_region_size = IT87_IOREG_LENGTH,
+	       .io_rsrc_no = 0,
 	       .hw_tx_capable = true,
 	       .sample_period = (u32) (1000000000ULL / 115200),
 	       .tx_carrier_freq = 38000,
@@ -1395,6 +1397,7 @@ static const struct ite_dev_params ite_dev_descs[] = {
 	{	/* 2: ITE8708 */
 	       .model = "ITE8708 CIR transceiver",
 	       .io_region_size = IT8708_IOREG_LENGTH,
+	       .io_rsrc_no = 0,
 	       .hw_tx_capable = true,
 	       .sample_period = (u32) (1000000000ULL / 115200),
 	       .tx_carrier_freq = 38000,
@@ -1420,6 +1423,7 @@ static const struct ite_dev_params ite_dev_descs[] = {
 	{	/* 3: ITE8709 */
 	       .model = "ITE8709 CIR transceiver",
 	       .io_region_size = IT8709_IOREG_LENGTH,
+	       .io_rsrc_no = 2,
 	       .hw_tx_capable = true,
 	       .sample_period = (u32) (1000000000ULL / 115200),
 	       .tx_carrier_freq = 38000,
@@ -1461,6 +1465,7 @@ static int ite_probe(struct pnp_dev *pdev, const struct pnp_device_id
 	struct rc_dev *rdev = NULL;
 	int ret = -ENOMEM;
 	int model_no;
+	int io_rsrc_no;
 
 	ite_dbg("%s called", __func__);
 
@@ -1490,10 +1495,11 @@ static int ite_probe(struct pnp_dev *pdev, const struct pnp_device_id
 
 	/* get the description for the device */
 	dev_desc = &ite_dev_descs[model_no];
+	io_rsrc_no = dev_desc->io_rsrc_no;
 
 	/* validate pnp resources */
-	if (!pnp_port_valid(pdev, 0) ||
-	    pnp_port_len(pdev, 0) != dev_desc->io_region_size) {
+	if (!pnp_port_valid(pdev, io_rsrc_no) ||
+	    pnp_port_len(pdev, io_rsrc_no) != dev_desc->io_region_size) {
 		dev_err(&pdev->dev, "IR PNP Port not valid!\n");
 		goto failure;
 	}
@@ -1504,7 +1510,7 @@ static int ite_probe(struct pnp_dev *pdev, const struct pnp_device_id
 	}
 
 	/* store resource values */
-	itdev->cir_addr = pnp_port_start(pdev, 0);
+	itdev->cir_addr = pnp_port_start(pdev, io_rsrc_no);
 	itdev->cir_irq = pnp_irq(pdev, 0);
 
 	/* initialize spinlocks */
diff --git a/drivers/media/rc/ite-cir.h b/drivers/media/rc/ite-cir.h
index 16a19f5fd71..aa899a0b975 100644
--- a/drivers/media/rc/ite-cir.h
+++ b/drivers/media/rc/ite-cir.h
@@ -57,6 +57,9 @@ struct ite_dev_params {
 	/* size of the I/O region */
 	int io_region_size;
 
+	/* IR pnp I/O resource number */
+	int io_rsrc_no;
+
 	/* true if the hardware supports transmission */
 	bool hw_tx_capable;
 
diff --git a/drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c b/drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c
index bb10ffe086b..8d558ae6345 100644
--- a/drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c
+++ b/drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c
@@ -15,43 +15,39 @@
 /* Pinnacle PCTV HD 800i mini remote */
 
 static struct rc_map_table pinnacle_pctv_hd[] = {
-
-	{ 0x0f, KEY_1 },
-	{ 0x15, KEY_2 },
-	{ 0x10, KEY_3 },
-	{ 0x18, KEY_4 },
-	{ 0x1b, KEY_5 },
-	{ 0x1e, KEY_6 },
-	{ 0x11, KEY_7 },
-	{ 0x21, KEY_8 },
-	{ 0x12, KEY_9 },
-	{ 0x27, KEY_0 },
-
-	{ 0x24, KEY_ZOOM },
-	{ 0x2a, KEY_SUBTITLE },
-
-	{ 0x00, KEY_MUTE },
-	{ 0x01, KEY_ENTER },	/* Pinnacle Logo */
-	{ 0x39, KEY_POWER },
-
-	{ 0x03, KEY_VOLUMEUP },
-	{ 0x09, KEY_VOLUMEDOWN },
-	{ 0x06, KEY_CHANNELUP },
-	{ 0x0c, KEY_CHANNELDOWN },
-
-	{ 0x2d, KEY_REWIND },
-	{ 0x30, KEY_PLAYPAUSE },
-	{ 0x33, KEY_FASTFORWARD },
-	{ 0x3c, KEY_STOP },
-	{ 0x36, KEY_RECORD },
-	{ 0x3f, KEY_EPG },	/* Labeled "?" */
+	/* Key codes for the tiny Pinnacle remote*/
+	{ 0x0700, KEY_MUTE },
+	{ 0x0701, KEY_MENU }, /* Pinnacle logo */
+	{ 0x0739, KEY_POWER },
+	{ 0x0703, KEY_VOLUMEUP },
+	{ 0x0709, KEY_VOLUMEDOWN },
+	{ 0x0706, KEY_CHANNELUP },
+	{ 0x070c, KEY_CHANNELDOWN },
+	{ 0x070f, KEY_1 },
+	{ 0x0715, KEY_2 },
+	{ 0x0710, KEY_3 },
+	{ 0x0718, KEY_4 },
+	{ 0x071b, KEY_5 },
+	{ 0x071e, KEY_6 },
+	{ 0x0711, KEY_7 },
+	{ 0x0721, KEY_8 },
+	{ 0x0712, KEY_9 },
+	{ 0x0727, KEY_0 },
+	{ 0x0724, KEY_ZOOM }, /* 'Square' key */
+	{ 0x072a, KEY_SUBTITLE },   /* 'T' key */
+	{ 0x072d, KEY_REWIND },
+	{ 0x0730, KEY_PLAYPAUSE },
+	{ 0x0733, KEY_FASTFORWARD },
+	{ 0x0736, KEY_RECORD },
+	{ 0x073c, KEY_STOP },
+	{ 0x073f, KEY_HELP }, /* '?' key */
 };
 
 static struct rc_map_list pinnacle_pctv_hd_map = {
 	.map = {
 		.scan    = pinnacle_pctv_hd,
 		.size    = ARRAY_SIZE(pinnacle_pctv_hd),
-		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_RC5,
 		.name    = RC_MAP_PINNACLE_PCTV_HD,
 	}
 };
diff --git a/drivers/media/rc/lirc_dev.c b/drivers/media/rc/lirc_dev.c
index fd237ab120b..27997a9ceb0 100644
--- a/drivers/media/rc/lirc_dev.c
+++ b/drivers/media/rc/lirc_dev.c
@@ -55,6 +55,8 @@ struct irctl {
 	struct lirc_buffer *buf;
 	unsigned int chunk_size;
 
+	struct cdev *cdev;
+
 	struct task_struct *task;
 	long jiffies_to_wait;
 };
@@ -62,7 +64,6 @@ struct irctl {
 static DEFINE_MUTEX(lirc_dev_lock);
 
 static struct irctl *irctls[MAX_IRCTL_DEVICES];
-static struct cdev cdevs[MAX_IRCTL_DEVICES];
 
 /* Only used for sysfs but defined to void otherwise */
 static struct class *lirc_class;
@@ -167,9 +168,13 @@ static struct file_operations lirc_dev_fops = {
 
 static int lirc_cdev_add(struct irctl *ir)
 {
-	int retval;
+	int retval = -ENOMEM;
 	struct lirc_driver *d = &ir->d;
-	struct cdev *cdev = &cdevs[d->minor];
+	struct cdev *cdev;
+
+	cdev = kzalloc(sizeof(*cdev), GFP_KERNEL);
+	if (!cdev)
+		goto err_out;
 
 	if (d->fops) {
 		cdev_init(cdev, d->fops);
@@ -180,12 +185,20 @@ static int lirc_cdev_add(struct irctl *ir)
 	}
 	retval = kobject_set_name(&cdev->kobj, "lirc%d", d->minor);
 	if (retval)
-		return retval;
+		goto err_out;
 
 	retval = cdev_add(cdev, MKDEV(MAJOR(lirc_base_dev), d->minor), 1);
-	if (retval)
+	if (retval) {
 		kobject_put(&cdev->kobj);
+		goto err_out;
+	}
+
+	ir->cdev = cdev;
+
+	return 0;
 
+err_out:
+	kfree(cdev);
 	return retval;
 }
 
@@ -214,7 +227,7 @@ int lirc_register_driver(struct lirc_driver *d)
 	if (MAX_IRCTL_DEVICES <= d->minor) {
 		dev_err(d->dev, "lirc_dev: lirc_register_driver: "
 			"\"minor\" must be between 0 and %d (%d)!\n",
-			MAX_IRCTL_DEVICES-1, d->minor);
+			MAX_IRCTL_DEVICES - 1, d->minor);
 		err = -EBADRQC;
 		goto out;
 	}
@@ -369,7 +382,7 @@ int lirc_unregister_driver(int minor)
 
 	if (minor < 0 || minor >= MAX_IRCTL_DEVICES) {
 		printk(KERN_ERR "lirc_dev: %s: minor (%d) must be between "
-		       "0 and %d!\n", __func__, minor, MAX_IRCTL_DEVICES-1);
+		       "0 and %d!\n", __func__, minor, MAX_IRCTL_DEVICES - 1);
 		return -EBADRQC;
 	}
 
@@ -380,7 +393,7 @@ int lirc_unregister_driver(int minor)
 		return -ENOENT;
 	}
 
-	cdev = &cdevs[minor];
+	cdev = ir->cdev;
 
 	mutex_lock(&lirc_dev_lock);
 
@@ -410,6 +423,7 @@ int lirc_unregister_driver(int minor)
 	} else {
 		lirc_irctl_cleanup(ir);
 		cdev_del(cdev);
+		kfree(cdev);
 		kfree(ir);
 		irctls[minor] = NULL;
 	}
@@ -453,7 +467,7 @@ int lirc_dev_fop_open(struct inode *inode, struct file *file)
 		goto error;
 	}
 
-	cdev = &cdevs[iminor(inode)];
+	cdev = ir->cdev;
 	if (try_module_get(cdev->owner)) {
 		ir->open++;
 		retval = ir->d.set_use_inc(ir->d.data);
@@ -484,13 +498,15 @@ EXPORT_SYMBOL(lirc_dev_fop_open);
 int lirc_dev_fop_close(struct inode *inode, struct file *file)
 {
 	struct irctl *ir = irctls[iminor(inode)];
-	struct cdev *cdev = &cdevs[iminor(inode)];
+	struct cdev *cdev;
 
 	if (!ir) {
 		printk(KERN_ERR "%s: called with invalid irctl\n", __func__);
 		return -EINVAL;
 	}
 
+	cdev = ir->cdev;
+
 	dev_dbg(ir->d.dev, LOGHEAD "close called\n", ir->d.name, ir->d.minor);
 
 	WARN_ON(mutex_lock_killable(&lirc_dev_lock));
@@ -503,6 +519,7 @@ int lirc_dev_fop_close(struct inode *inode, struct file *file)
 		lirc_irctl_cleanup(ir);
 		cdev_del(cdev);
 		irctls[ir->d.minor] = NULL;
+		kfree(cdev);
 		kfree(ir);
 	}
 
diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c
index ad927fcaa02..06dfe0957b5 100644
--- a/drivers/media/rc/mceusb.c
+++ b/drivers/media/rc/mceusb.c
@@ -108,6 +108,12 @@ static int debug = 1;
 static int debug;
 #endif
 
+#define mce_dbg(dev, fmt, ...)					\
+	do {							\
+		if (debug)					\
+			dev_info(dev, fmt, ## __VA_ARGS__);	\
+	} while (0)
+
 /* general constants */
 #define SEND_FLAG_IN_PROGRESS	1
 #define SEND_FLAG_COMPLETE	2
@@ -246,6 +252,9 @@ static struct usb_device_id mceusb_dev_table[] = {
 	  .driver_info = MCE_GEN2_TX_INV },
 	/* SMK eHome Infrared Transceiver */
 	{ USB_DEVICE(VENDOR_SMK, 0x0338) },
+	/* SMK/I-O Data GV-MC7/RCKIT Receiver */
+	{ USB_DEVICE(VENDOR_SMK, 0x0353),
+	  .driver_info = MCE_GEN2_NO_TX },
 	/* Tatung eHome Infrared Transceiver */
 	{ USB_DEVICE(VENDOR_TATUNG, 0x9150) },
 	/* Shuttle eHome Infrared Transceiver */
@@ -606,12 +615,15 @@ static void mce_async_callback(struct urb *urb, struct pt_regs *regs)
 	if (ir) {
 		len = urb->actual_length;
 
-		dev_dbg(ir->dev, "callback called (status=%d len=%d)\n",
+		mce_dbg(ir->dev, "callback called (status=%d len=%d)\n",
 			urb->status, len);
 
 		mceusb_dev_printdata(ir, urb->transfer_buffer, 0, len, true);
 	}
 
+	/* the transfer buffer and urb were allocated in mce_request_packet */
+	kfree(urb->transfer_buffer);
+	usb_free_urb(urb);
 }
 
 /* request incoming or send outgoing usb packet - used to initialize remote */
@@ -655,17 +667,17 @@ static void mce_request_packet(struct mceusb_dev *ir, unsigned char *data,
 		return;
 	}
 
-	dev_dbg(dev, "receive request called (size=%#x)\n", size);
+	mce_dbg(dev, "receive request called (size=%#x)\n", size);
 
 	async_urb->transfer_buffer_length = size;
 	async_urb->dev = ir->usbdev;
 
 	res = usb_submit_urb(async_urb, GFP_ATOMIC);
 	if (res) {
-		dev_dbg(dev, "receive request FAILED! (res=%d)\n", res);
+		mce_dbg(dev, "receive request FAILED! (res=%d)\n", res);
 		return;
 	}
-	dev_dbg(dev, "receive request complete (res=%d)\n", res);
+	mce_dbg(dev, "receive request complete (res=%d)\n", res);
 }
 
 static void mce_async_out(struct mceusb_dev *ir, unsigned char *data, int size)
@@ -673,9 +685,9 @@ static void mce_async_out(struct mceusb_dev *ir, unsigned char *data, int size)
 	mce_request_packet(ir, data, size, MCEUSB_TX);
 }
 
-static void mce_sync_in(struct mceusb_dev *ir, unsigned char *data, int size)
+static void mce_flush_rx_buffer(struct mceusb_dev *ir, int size)
 {
-	mce_request_packet(ir, data, size, MCEUSB_RX);
+	mce_request_packet(ir, NULL, size, MCEUSB_RX);
 }
 
 /* Send data out the IR blaster port(s) */
@@ -794,7 +806,7 @@ static int mceusb_set_tx_carrier(struct rc_dev *dev, u32 carrier)
 			ir->carrier = carrier;
 			cmdbuf[2] = MCE_CMD_SIG_END;
 			cmdbuf[3] = MCE_IRDATA_TRAILER;
-			dev_dbg(ir->dev, "%s: disabling carrier "
+			mce_dbg(ir->dev, "%s: disabling carrier "
 				"modulation\n", __func__);
 			mce_async_out(ir, cmdbuf, sizeof(cmdbuf));
 			return carrier;
@@ -806,7 +818,7 @@ static int mceusb_set_tx_carrier(struct rc_dev *dev, u32 carrier)
 				ir->carrier = carrier;
 				cmdbuf[2] = prescaler;
 				cmdbuf[3] = divisor;
-				dev_dbg(ir->dev, "%s: requesting %u HZ "
+				mce_dbg(ir->dev, "%s: requesting %u HZ "
 					"carrier\n", __func__, carrier);
 
 				/* Transmit new carrier to mce device */
@@ -879,7 +891,7 @@ static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len)
 			rawir.duration = (ir->buf_in[i] & MCE_PULSE_MASK)
 					 * US_TO_NS(MCE_TIME_UNIT);
 
-			dev_dbg(ir->dev, "Storing %s with duration %d\n",
+			mce_dbg(ir->dev, "Storing %s with duration %d\n",
 				rawir.pulse ? "pulse" : "space",
 				rawir.duration);
 
@@ -911,7 +923,7 @@ static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len)
 		if (ir->parser_state != CMD_HEADER && !ir->rem)
 			ir->parser_state = CMD_HEADER;
 	}
-	dev_dbg(ir->dev, "processed IR data, calling ir_raw_event_handle\n");
+	mce_dbg(ir->dev, "processed IR data, calling ir_raw_event_handle\n");
 	ir_raw_event_handle(ir->rc);
 }
 
@@ -933,7 +945,7 @@ static void mceusb_dev_recv(struct urb *urb, struct pt_regs *regs)
 
 	if (ir->send_flags == RECV_FLAG_IN_PROGRESS) {
 		ir->send_flags = SEND_FLAG_COMPLETE;
-		dev_dbg(ir->dev, "setup answer received %d bytes\n",
+		mce_dbg(ir->dev, "setup answer received %d bytes\n",
 			buf_len);
 	}
 
@@ -951,7 +963,7 @@ static void mceusb_dev_recv(struct urb *urb, struct pt_regs *regs)
 
 	case -EPIPE:
 	default:
-		dev_dbg(ir->dev, "Error: urb status = %d\n", urb->status);
+		mce_dbg(ir->dev, "Error: urb status = %d\n", urb->status);
 		break;
 	}
 
@@ -961,7 +973,6 @@ static void mceusb_dev_recv(struct urb *urb, struct pt_regs *regs)
 static void mceusb_gen1_init(struct mceusb_dev *ir)
 {
 	int ret;
-	int maxp = ir->len_in;
 	struct device *dev = ir->dev;
 	char *data;
 
@@ -978,8 +989,8 @@ static void mceusb_gen1_init(struct mceusb_dev *ir)
 	ret = usb_control_msg(ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0),
 			      USB_REQ_SET_ADDRESS, USB_TYPE_VENDOR, 0, 0,
 			      data, USB_CTRL_MSG_SZ, HZ * 3);
-	dev_dbg(dev, "%s - ret = %d\n", __func__, ret);
-	dev_dbg(dev, "%s - data[0] = %d, data[1] = %d\n",
+	mce_dbg(dev, "%s - ret = %d\n", __func__, ret);
+	mce_dbg(dev, "%s - data[0] = %d, data[1] = %d\n",
 		__func__, data[0], data[1]);
 
 	/* set feature: bit rate 38400 bps */
@@ -987,71 +998,56 @@ static void mceusb_gen1_init(struct mceusb_dev *ir)
 			      USB_REQ_SET_FEATURE, USB_TYPE_VENDOR,
 			      0xc04e, 0x0000, NULL, 0, HZ * 3);
 
-	dev_dbg(dev, "%s - ret = %d\n", __func__, ret);
+	mce_dbg(dev, "%s - ret = %d\n", __func__, ret);
 
 	/* bRequest 4: set char length to 8 bits */
 	ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
 			      4, USB_TYPE_VENDOR,
 			      0x0808, 0x0000, NULL, 0, HZ * 3);
-	dev_dbg(dev, "%s - retB = %d\n", __func__, ret);
+	mce_dbg(dev, "%s - retB = %d\n", __func__, ret);
 
 	/* bRequest 2: set handshaking to use DTR/DSR */
 	ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
 			      2, USB_TYPE_VENDOR,
 			      0x0000, 0x0100, NULL, 0, HZ * 3);
-	dev_dbg(dev, "%s - retC = %d\n", __func__, ret);
+	mce_dbg(dev, "%s - retC = %d\n", __func__, ret);
 
 	/* device reset */
 	mce_async_out(ir, DEVICE_RESET, sizeof(DEVICE_RESET));
-	mce_sync_in(ir, NULL, maxp);
 
 	/* get hw/sw revision? */
 	mce_async_out(ir, GET_REVISION, sizeof(GET_REVISION));
-	mce_sync_in(ir, NULL, maxp);
 
 	kfree(data);
 };
 
 static void mceusb_gen2_init(struct mceusb_dev *ir)
 {
-	int maxp = ir->len_in;
-
 	/* device reset */
 	mce_async_out(ir, DEVICE_RESET, sizeof(DEVICE_RESET));
-	mce_sync_in(ir, NULL, maxp);
 
 	/* get hw/sw revision? */
 	mce_async_out(ir, GET_REVISION, sizeof(GET_REVISION));
-	mce_sync_in(ir, NULL, maxp);
 
 	/* unknown what the next two actually return... */
 	mce_async_out(ir, GET_UNKNOWN, sizeof(GET_UNKNOWN));
-	mce_sync_in(ir, NULL, maxp);
 	mce_async_out(ir, GET_UNKNOWN2, sizeof(GET_UNKNOWN2));
-	mce_sync_in(ir, NULL, maxp);
 }
 
 static void mceusb_get_parameters(struct mceusb_dev *ir)
 {
-	int maxp = ir->len_in;
-
 	/* get the carrier and frequency */
 	mce_async_out(ir, GET_CARRIER_FREQ, sizeof(GET_CARRIER_FREQ));
-	mce_sync_in(ir, NULL, maxp);
 
-	if (!ir->flags.no_tx) {
+	if (!ir->flags.no_tx)
 		/* get the transmitter bitmask */
 		mce_async_out(ir, GET_TX_BITMASK, sizeof(GET_TX_BITMASK));
-		mce_sync_in(ir, NULL, maxp);
-	}
 
 	/* get receiver timeout value */
 	mce_async_out(ir, GET_RX_TIMEOUT, sizeof(GET_RX_TIMEOUT));
-	mce_sync_in(ir, NULL, maxp);
 
 	/* get receiver sensor setting */
 	mce_async_out(ir, GET_RX_SENSOR, sizeof(GET_RX_SENSOR));
-	mce_sync_in(ir, NULL, maxp);
 }
 
 static struct rc_dev *mceusb_init_rc_dev(struct mceusb_dev *ir)
@@ -1122,7 +1118,7 @@ static int __devinit mceusb_dev_probe(struct usb_interface *intf,
 	bool tx_mask_normal;
 	int ir_intfnum;
 
-	dev_dbg(&intf->dev, "%s called\n", __func__);
+	mce_dbg(&intf->dev, "%s called\n", __func__);
 
 	idesc  = intf->cur_altsetting;
 
@@ -1150,7 +1146,7 @@ static int __devinit mceusb_dev_probe(struct usb_interface *intf,
 			ep_in = ep;
 			ep_in->bmAttributes = USB_ENDPOINT_XFER_INT;
 			ep_in->bInterval = 1;
-			dev_dbg(&intf->dev, "acceptable inbound endpoint "
+			mce_dbg(&intf->dev, "acceptable inbound endpoint "
 				"found\n");
 		}
 
@@ -1165,12 +1161,12 @@ static int __devinit mceusb_dev_probe(struct usb_interface *intf,
 			ep_out = ep;
 			ep_out->bmAttributes = USB_ENDPOINT_XFER_INT;
 			ep_out->bInterval = 1;
-			dev_dbg(&intf->dev, "acceptable outbound endpoint "
+			mce_dbg(&intf->dev, "acceptable outbound endpoint "
 				"found\n");
 		}
 	}
 	if (ep_in == NULL) {
-		dev_dbg(&intf->dev, "inbound and/or endpoint not found\n");
+		mce_dbg(&intf->dev, "inbound and/or endpoint not found\n");
 		return -ENODEV;
 	}
 
@@ -1215,16 +1211,16 @@ static int __devinit mceusb_dev_probe(struct usb_interface *intf,
 	if (!ir->rc)
 		goto rc_dev_fail;
 
-	/* flush buffers on the device */
-	mce_sync_in(ir, NULL, maxp);
-	mce_sync_in(ir, NULL, maxp);
-
 	/* wire up inbound data handler */
 	usb_fill_int_urb(ir->urb_in, dev, pipe, ir->buf_in,
 		maxp, (usb_complete_t) mceusb_dev_recv, ir, ep_in->bInterval);
 	ir->urb_in->transfer_dma = ir->dma_in;
 	ir->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 
+	/* flush buffers on the device */
+	mce_dbg(&intf->dev, "Flushing receive buffers\n");
+	mce_flush_rx_buffer(ir, maxp);
+
 	/* initialize device */
 	if (ir->flags.microsoft_gen1)
 		mceusb_gen1_init(ir);
diff --git a/drivers/media/rc/nuvoton-cir.c b/drivers/media/rc/nuvoton-cir.c
index bf3060ea610..565f24c20d7 100644
--- a/drivers/media/rc/nuvoton-cir.c
+++ b/drivers/media/rc/nuvoton-cir.c
@@ -991,7 +991,6 @@ static int nvt_open(struct rc_dev *dev)
 	unsigned long flags;
 
 	spin_lock_irqsave(&nvt->nvt_lock, flags);
-	nvt->in_use = true;
 	nvt_enable_cir(nvt);
 	spin_unlock_irqrestore(&nvt->nvt_lock, flags);
 
@@ -1004,7 +1003,6 @@ static void nvt_close(struct rc_dev *dev)
 	unsigned long flags;
 
 	spin_lock_irqsave(&nvt->nvt_lock, flags);
-	nvt->in_use = false;
 	nvt_disable_cir(nvt);
 	spin_unlock_irqrestore(&nvt->nvt_lock, flags);
 }
diff --git a/drivers/media/rc/nuvoton-cir.h b/drivers/media/rc/nuvoton-cir.h
index 379795d61ea..1241fc89a36 100644
--- a/drivers/media/rc/nuvoton-cir.h
+++ b/drivers/media/rc/nuvoton-cir.h
@@ -70,7 +70,6 @@ struct nvt_dev {
 	struct ir_raw_event rawir;
 
 	spinlock_t nvt_lock;
-	bool in_use;
 
 	/* for rx */
 	u8 buf[RX_BUF_LEN];
diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
index f57cd5677ac..3186ac7c2c1 100644
--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -522,18 +522,20 @@ EXPORT_SYMBOL_GPL(rc_g_keycode_from_table);
 /**
  * ir_do_keyup() - internal function to signal the release of a keypress
  * @dev:	the struct rc_dev descriptor of the device
+ * @sync:	whether or not to call input_sync
  *
  * This function is used internally to release a keypress, it must be
  * called with keylock held.
  */
-static void ir_do_keyup(struct rc_dev *dev)
+static void ir_do_keyup(struct rc_dev *dev, bool sync)
 {
 	if (!dev->keypressed)
 		return;
 
 	IR_dprintk(1, "keyup key 0x%04x\n", dev->last_keycode);
 	input_report_key(dev->input_dev, dev->last_keycode, 0);
-	input_sync(dev->input_dev);
+	if (sync)
+		input_sync(dev->input_dev);
 	dev->keypressed = false;
 }
 
@@ -549,7 +551,7 @@ void rc_keyup(struct rc_dev *dev)
 	unsigned long flags;
 
 	spin_lock_irqsave(&dev->keylock, flags);
-	ir_do_keyup(dev);
+	ir_do_keyup(dev, true);
 	spin_unlock_irqrestore(&dev->keylock, flags);
 }
 EXPORT_SYMBOL_GPL(rc_keyup);
@@ -578,7 +580,7 @@ static void ir_timer_keyup(unsigned long cookie)
 	 */
 	spin_lock_irqsave(&dev->keylock, flags);
 	if (time_is_before_eq_jiffies(dev->keyup_jiffies))
-		ir_do_keyup(dev);
+		ir_do_keyup(dev, true);
 	spin_unlock_irqrestore(&dev->keylock, flags);
 }
 
@@ -597,6 +599,7 @@ void rc_repeat(struct rc_dev *dev)
 	spin_lock_irqsave(&dev->keylock, flags);
 
 	input_event(dev->input_dev, EV_MSC, MSC_SCAN, dev->last_scancode);
+	input_sync(dev->input_dev);
 
 	if (!dev->keypressed)
 		goto out;
@@ -622,29 +625,28 @@ EXPORT_SYMBOL_GPL(rc_repeat);
 static void ir_do_keydown(struct rc_dev *dev, int scancode,
 			  u32 keycode, u8 toggle)
 {
-	input_event(dev->input_dev, EV_MSC, MSC_SCAN, scancode);
-
-	/* Repeat event? */
-	if (dev->keypressed &&
-	    dev->last_scancode == scancode &&
-	    dev->last_toggle == toggle)
-		return;
+	bool new_event = !dev->keypressed ||
+			 dev->last_scancode != scancode ||
+			 dev->last_toggle != toggle;
 
-	/* Release old keypress */
-	ir_do_keyup(dev);
+	if (new_event && dev->keypressed)
+		ir_do_keyup(dev, false);
 
-	dev->last_scancode = scancode;
-	dev->last_toggle = toggle;
-	dev->last_keycode = keycode;
+	input_event(dev->input_dev, EV_MSC, MSC_SCAN, scancode);
 
-	if (keycode == KEY_RESERVED)
-		return;
+	if (new_event && keycode != KEY_RESERVED) {
+		/* Register a keypress */
+		dev->keypressed = true;
+		dev->last_scancode = scancode;
+		dev->last_toggle = toggle;
+		dev->last_keycode = keycode;
+
+		IR_dprintk(1, "%s: key down event, "
+			   "key 0x%04x, scancode 0x%04x\n",
+			   dev->input_name, keycode, scancode);
+		input_report_key(dev->input_dev, keycode, 1);
+	}
 
-	/* Register a keypress */
-	dev->keypressed = true;
-	IR_dprintk(1, "%s: key down event, key 0x%04x, scancode 0x%04x\n",
-		   dev->input_name, keycode, scancode);
-	input_report_key(dev->input_dev, dev->last_keycode, 1);
 	input_sync(dev->input_dev);
 }
 
diff --git a/drivers/media/video/m5mols/m5mols.h b/drivers/media/video/m5mols/m5mols.h
index 10b55c85448..89d09a8914f 100644
--- a/drivers/media/video/m5mols/m5mols.h
+++ b/drivers/media/video/m5mols/m5mols.h
@@ -2,10 +2,10 @@
  * Header for M-5MOLS 8M Pixel camera sensor with ISP
  *
  * Copyright (C) 2011 Samsung Electronics Co., Ltd.
- * Author: HeungJun Kim, riverful.kim@samsung.com
+ * Author: HeungJun Kim <riverful.kim@samsung.com>
  *
  * Copyright (C) 2009 Samsung Electronics Co., Ltd.
- * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com
+ * Author: Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -106,23 +106,23 @@ struct m5mols_capture {
  * The each value according to each scenemode is recommended in the documents.
  */
 struct m5mols_scenemode {
-	u32 metering;
-	u32 ev_bias;
-	u32 wb_mode;
-	u32 wb_preset;
-	u32 chroma_en;
-	u32 chroma_lvl;
-	u32 edge_en;
-	u32 edge_lvl;
-	u32 af_range;
-	u32 fd_mode;
-	u32 mcc;
-	u32 light;
-	u32 flash;
-	u32 tone;
-	u32 iso;
-	u32 capt_mode;
-	u32 wdr;
+	u8 metering;
+	u8 ev_bias;
+	u8 wb_mode;
+	u8 wb_preset;
+	u8 chroma_en;
+	u8 chroma_lvl;
+	u8 edge_en;
+	u8 edge_lvl;
+	u8 af_range;
+	u8 fd_mode;
+	u8 mcc;
+	u8 light;
+	u8 flash;
+	u8 tone;
+	u8 iso;
+	u8 capt_mode;
+	u8 wdr;
 };
 
 /**
@@ -154,7 +154,6 @@ struct m5mols_version {
 	u8	str[VERSION_STRING_SIZE];
 	u8	af;
 };
-#define VERSION_SIZE sizeof(struct m5mols_version)
 
 /**
  * struct m5mols_info - M-5MOLS driver data structure
@@ -216,9 +215,9 @@ struct m5mols_info {
 	bool lock_ae;
 	bool lock_awb;
 	u8 resolution;
-	u32 interrupt;
-	u32 mode;
-	u32 mode_save;
+	u8 interrupt;
+	u8 mode;
+	u8 mode_save;
 	int (*set_power)(struct device *dev, int on);
 };
 
@@ -256,9 +255,11 @@ struct m5mols_info {
  *   +-------+---+----------+-----+------+------+------+------+
  *   - d[0..3]: according to size1
  */
-int m5mols_read(struct v4l2_subdev *sd, u32 reg_comb, u32 *val);
+int m5mols_read_u8(struct v4l2_subdev *sd, u32 reg_comb, u8 *val);
+int m5mols_read_u16(struct v4l2_subdev *sd, u32 reg_comb, u16 *val);
+int m5mols_read_u32(struct v4l2_subdev *sd, u32 reg_comb, u32 *val);
 int m5mols_write(struct v4l2_subdev *sd, u32 reg_comb, u32 val);
-int m5mols_busy(struct v4l2_subdev *sd, u8 category, u8 cmd, u32 value);
+int m5mols_busy(struct v4l2_subdev *sd, u8 category, u8 cmd, u8 value);
 
 /*
  * Mode operation of the M-5MOLS
@@ -280,12 +281,12 @@ int m5mols_busy(struct v4l2_subdev *sd, u8 category, u8 cmd, u32 value);
  * The available executing order between each modes are as follows:
  *   PARAMETER <---> MONITOR <---> CAPTURE
  */
-int m5mols_mode(struct m5mols_info *info, u32 mode);
+int m5mols_mode(struct m5mols_info *info, u8 mode);
 
-int m5mols_enable_interrupt(struct v4l2_subdev *sd, u32 reg);
+int m5mols_enable_interrupt(struct v4l2_subdev *sd, u8 reg);
 int m5mols_sync_controls(struct m5mols_info *info);
 int m5mols_start_capture(struct m5mols_info *info);
-int m5mols_do_scenemode(struct m5mols_info *info, u32 mode);
+int m5mols_do_scenemode(struct m5mols_info *info, u8 mode);
 int m5mols_lock_3a(struct m5mols_info *info, bool lock);
 int m5mols_set_ctrl(struct v4l2_ctrl *ctrl);
 
diff --git a/drivers/media/video/m5mols/m5mols_capture.c b/drivers/media/video/m5mols/m5mols_capture.c
index d71a3903b60..d9471928369 100644
--- a/drivers/media/video/m5mols/m5mols_capture.c
+++ b/drivers/media/video/m5mols/m5mols_capture.c
@@ -2,10 +2,10 @@
  * The Capture code for Fujitsu M-5MOLS ISP
  *
  * Copyright (C) 2011 Samsung Electronics Co., Ltd.
- * Author: HeungJun Kim, riverful.kim@samsung.com
+ * Author: HeungJun Kim <riverful.kim@samsung.com>
  *
  * Copyright (C) 2009 Samsung Electronics Co., Ltd.
- * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com
+ * Author: Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -58,9 +58,9 @@ static int m5mols_read_rational(struct v4l2_subdev *sd, u32 addr_num,
 {
 	u32 num, den;
 
-	int ret = m5mols_read(sd, addr_num, &num);
+	int ret = m5mols_read_u32(sd, addr_num, &num);
 	if (!ret)
-		ret = m5mols_read(sd, addr_den, &den);
+		ret = m5mols_read_u32(sd, addr_den, &den);
 	if (ret)
 		return ret;
 	*val = den == 0 ? 0 : num / den;
@@ -99,20 +99,20 @@ static int m5mols_capture_info(struct m5mols_info *info)
 	if (ret)
 		return ret;
 
-	ret = m5mols_read(sd, EXIF_INFO_ISO, (u32 *)&exif->iso_speed);
+	ret = m5mols_read_u16(sd, EXIF_INFO_ISO, &exif->iso_speed);
 	if (!ret)
-		ret = m5mols_read(sd, EXIF_INFO_FLASH, (u32 *)&exif->flash);
+		ret = m5mols_read_u16(sd, EXIF_INFO_FLASH, &exif->flash);
 	if (!ret)
-		ret = m5mols_read(sd, EXIF_INFO_SDR, (u32 *)&exif->sdr);
+		ret = m5mols_read_u16(sd, EXIF_INFO_SDR, &exif->sdr);
 	if (!ret)
-		ret = m5mols_read(sd, EXIF_INFO_QVAL, (u32 *)&exif->qval);
+		ret = m5mols_read_u16(sd, EXIF_INFO_QVAL, &exif->qval);
 	if (ret)
 		return ret;
 
 	if (!ret)
-		ret = m5mols_read(sd, CAPC_IMAGE_SIZE, &info->cap.main);
+		ret = m5mols_read_u32(sd, CAPC_IMAGE_SIZE, &info->cap.main);
 	if (!ret)
-		ret = m5mols_read(sd, CAPC_THUMB_SIZE, &info->cap.thumb);
+		ret = m5mols_read_u32(sd, CAPC_THUMB_SIZE, &info->cap.thumb);
 	if (!ret)
 		info->cap.total = info->cap.main + info->cap.thumb;
 
@@ -122,7 +122,7 @@ static int m5mols_capture_info(struct m5mols_info *info)
 int m5mols_start_capture(struct m5mols_info *info)
 {
 	struct v4l2_subdev *sd = &info->sd;
-	u32 resolution = info->resolution;
+	u8 resolution = info->resolution;
 	int timeout;
 	int ret;
 
diff --git a/drivers/media/video/m5mols/m5mols_controls.c b/drivers/media/video/m5mols/m5mols_controls.c
index 817c16fec36..d135d20d09c 100644
--- a/drivers/media/video/m5mols/m5mols_controls.c
+++ b/drivers/media/video/m5mols/m5mols_controls.c
@@ -2,10 +2,10 @@
  * Controls for M-5MOLS 8M Pixel camera sensor with ISP
  *
  * Copyright (C) 2011 Samsung Electronics Co., Ltd.
- * Author: HeungJun Kim, riverful.kim@samsung.com
+ * Author: HeungJun Kim <riverful.kim@samsung.com>
  *
  * Copyright (C) 2009 Samsung Electronics Co., Ltd.
- * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com
+ * Author: Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -130,7 +130,7 @@ static struct m5mols_scenemode m5mols_default_scenemode[] = {
  *
  * WARNING: The execution order is important. Do not change the order.
  */
-int m5mols_do_scenemode(struct m5mols_info *info, u32 mode)
+int m5mols_do_scenemode(struct m5mols_info *info, u8 mode)
 {
 	struct v4l2_subdev *sd = &info->sd;
 	struct m5mols_scenemode scenemode = m5mols_default_scenemode[mode];
diff --git a/drivers/media/video/m5mols/m5mols_core.c b/drivers/media/video/m5mols/m5mols_core.c
index 76eac26e84a..43c68f51c5c 100644
--- a/drivers/media/video/m5mols/m5mols_core.c
+++ b/drivers/media/video/m5mols/m5mols_core.c
@@ -2,10 +2,10 @@
  * Driver for M-5MOLS 8M Pixel camera sensor with ISP
  *
  * Copyright (C) 2011 Samsung Electronics Co., Ltd.
- * Author: HeungJun Kim, riverful.kim@samsung.com
+ * Author: HeungJun Kim <riverful.kim@samsung.com>
  *
  * Copyright (C) 2009 Samsung Electronics Co., Ltd.
- * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com
+ * Author: Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -133,13 +133,13 @@ static u32 m5mols_swap_byte(u8 *data, u8 length)
 /**
  * m5mols_read -  I2C read function
  * @reg: combination of size, category and command for the I2C packet
+ * @size: desired size of I2C packet
  * @val: read value
  */
-int m5mols_read(struct v4l2_subdev *sd, u32 reg, u32 *val)
+static int m5mols_read(struct v4l2_subdev *sd, u32 size, u32 reg, u32 *val)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
 	u8 rbuf[M5MOLS_I2C_MAX_SIZE + 1];
-	u8 size = I2C_SIZE(reg);
 	u8 category = I2C_CATEGORY(reg);
 	u8 cmd = I2C_COMMAND(reg);
 	struct i2c_msg msg[2];
@@ -149,11 +149,6 @@ int m5mols_read(struct v4l2_subdev *sd, u32 reg, u32 *val)
 	if (!client->adapter)
 		return -ENODEV;
 
-	if (size != 1 && size != 2 && size != 4) {
-		v4l2_err(sd, "Wrong data size\n");
-		return -EINVAL;
-	}
-
 	msg[0].addr = client->addr;
 	msg[0].flags = 0;
 	msg[0].len = 5;
@@ -184,6 +179,52 @@ int m5mols_read(struct v4l2_subdev *sd, u32 reg, u32 *val)
 	return 0;
 }
 
+int m5mols_read_u8(struct v4l2_subdev *sd, u32 reg, u8 *val)
+{
+	u32 val_32;
+	int ret;
+
+	if (I2C_SIZE(reg) != 1) {
+		v4l2_err(sd, "Wrong data size\n");
+		return -EINVAL;
+	}
+
+	ret = m5mols_read(sd, I2C_SIZE(reg), reg, &val_32);
+	if (ret)
+		return ret;
+
+	*val = (u8)val_32;
+	return ret;
+}
+
+int m5mols_read_u16(struct v4l2_subdev *sd, u32 reg, u16 *val)
+{
+	u32 val_32;
+	int ret;
+
+	if (I2C_SIZE(reg) != 2) {
+		v4l2_err(sd, "Wrong data size\n");
+		return -EINVAL;
+	}
+
+	ret = m5mols_read(sd, I2C_SIZE(reg), reg, &val_32);
+	if (ret)
+		return ret;
+
+	*val = (u16)val_32;
+	return ret;
+}
+
+int m5mols_read_u32(struct v4l2_subdev *sd, u32 reg, u32 *val)
+{
+	if (I2C_SIZE(reg) != 4) {
+		v4l2_err(sd, "Wrong data size\n");
+		return -EINVAL;
+	}
+
+	return m5mols_read(sd, I2C_SIZE(reg), reg, val);
+}
+
 /**
  * m5mols_write - I2C command write function
  * @reg: combination of size, category and command for the I2C packet
@@ -231,13 +272,14 @@ int m5mols_write(struct v4l2_subdev *sd, u32 reg, u32 val)
 	return 0;
 }
 
-int m5mols_busy(struct v4l2_subdev *sd, u8 category, u8 cmd, u32 mask)
+int m5mols_busy(struct v4l2_subdev *sd, u8 category, u8 cmd, u8 mask)
 {
-	u32 busy, i;
+	u8 busy;
+	int i;
 	int ret;
 
 	for (i = 0; i < M5MOLS_I2C_CHECK_RETRY; i++) {
-		ret = m5mols_read(sd, I2C_REG(category, cmd, 1), &busy);
+		ret = m5mols_read_u8(sd, I2C_REG(category, cmd, 1), &busy);
 		if (ret < 0)
 			return ret;
 		if ((busy & mask) == mask)
@@ -252,14 +294,14 @@ int m5mols_busy(struct v4l2_subdev *sd, u8 category, u8 cmd, u32 mask)
  * Before writing desired interrupt value the INT_FACTOR register should
  * be read to clear pending interrupts.
  */
-int m5mols_enable_interrupt(struct v4l2_subdev *sd, u32 reg)
+int m5mols_enable_interrupt(struct v4l2_subdev *sd, u8 reg)
 {
 	struct m5mols_info *info = to_m5mols(sd);
-	u32 mask = is_available_af(info) ? REG_INT_AF : 0;
-	u32 dummy;
+	u8 mask = is_available_af(info) ? REG_INT_AF : 0;
+	u8 dummy;
 	int ret;
 
-	ret = m5mols_read(sd, SYSTEM_INT_FACTOR, &dummy);
+	ret = m5mols_read_u8(sd, SYSTEM_INT_FACTOR, &dummy);
 	if (!ret)
 		ret = m5mols_write(sd, SYSTEM_INT_ENABLE, reg & ~mask);
 	return ret;
@@ -271,7 +313,7 @@ int m5mols_enable_interrupt(struct v4l2_subdev *sd, u32 reg)
  * It always accompanies a little delay changing the M-5MOLS mode, so it is
  * needed checking current busy status to guarantee right mode.
  */
-static int m5mols_reg_mode(struct v4l2_subdev *sd, u32 mode)
+static int m5mols_reg_mode(struct v4l2_subdev *sd, u8 mode)
 {
 	int ret = m5mols_write(sd, SYSTEM_SYSMODE, mode);
 
@@ -286,16 +328,16 @@ static int m5mols_reg_mode(struct v4l2_subdev *sd, u32 mode)
  * can be guaranteed only when the sensor is operating in mode which which
  * a command belongs to.
  */
-int m5mols_mode(struct m5mols_info *info, u32 mode)
+int m5mols_mode(struct m5mols_info *info, u8 mode)
 {
 	struct v4l2_subdev *sd = &info->sd;
 	int ret = -EINVAL;
-	u32 reg;
+	u8 reg;
 
 	if (mode < REG_PARAMETER && mode > REG_CAPTURE)
 		return ret;
 
-	ret = m5mols_read(sd, SYSTEM_SYSMODE, &reg);
+	ret = m5mols_read_u8(sd, SYSTEM_SYSMODE, &reg);
 	if ((!ret && reg == mode) || ret)
 		return ret;
 
@@ -344,41 +386,37 @@ int m5mols_mode(struct m5mols_info *info, u32 mode)
 static int m5mols_get_version(struct v4l2_subdev *sd)
 {
 	struct m5mols_info *info = to_m5mols(sd);
-	union {
-		struct m5mols_version ver;
-		u8 bytes[VERSION_SIZE];
-	} version;
-	u32 *value;
-	u8 cmd = CAT0_VER_CUSTOMER;
+	struct m5mols_version *ver = &info->ver;
+	u8 *str = ver->str;
+	int i;
 	int ret;
 
-	do {
-		value = (u32 *)&version.bytes[cmd];
-		ret = m5mols_read(sd, SYSTEM_CMD(cmd), value);
-		if (ret)
-			return ret;
-	} while (cmd++ != CAT0_VER_AWB);
+	ret = m5mols_read_u8(sd, SYSTEM_VER_CUSTOMER, &ver->customer);
+	if (!ret)
+		ret = m5mols_read_u8(sd, SYSTEM_VER_PROJECT, &ver->project);
+	if (!ret)
+		ret = m5mols_read_u16(sd, SYSTEM_VER_FIRMWARE, &ver->fw);
+	if (!ret)
+		ret = m5mols_read_u16(sd, SYSTEM_VER_HARDWARE, &ver->hw);
+	if (!ret)
+		ret = m5mols_read_u16(sd, SYSTEM_VER_PARAMETER, &ver->param);
+	if (!ret)
+		ret = m5mols_read_u16(sd, SYSTEM_VER_AWB, &ver->awb);
+	if (!ret)
+		ret = m5mols_read_u8(sd, AF_VERSION, &ver->af);
+	if (ret)
+		return ret;
 
-	do {
-		value = (u32 *)&version.bytes[cmd];
-		ret = m5mols_read(sd, SYSTEM_VER_STRING, value);
+	for (i = 0; i < VERSION_STRING_SIZE; i++) {
+		ret = m5mols_read_u8(sd, SYSTEM_VER_STRING, &str[i]);
 		if (ret)
 			return ret;
-		if (cmd >= VERSION_SIZE - 1)
-			return -EINVAL;
-	} while (version.bytes[cmd++]);
-
-	value = (u32 *)&version.bytes[cmd];
-	ret = m5mols_read(sd, AF_VERSION, value);
-	if (ret)
-		return ret;
+	}
 
-	/* store version information swapped for being readable */
-	info->ver	= version.ver;
-	info->ver.fw	= be16_to_cpu(info->ver.fw);
-	info->ver.hw	= be16_to_cpu(info->ver.hw);
-	info->ver.param	= be16_to_cpu(info->ver.param);
-	info->ver.awb	= be16_to_cpu(info->ver.awb);
+	ver->fw = be16_to_cpu(ver->fw);
+	ver->hw = be16_to_cpu(ver->hw);
+	ver->param = be16_to_cpu(ver->param);
+	ver->awb = be16_to_cpu(ver->awb);
 
 	v4l2_info(sd, "Manufacturer\t[%s]\n",
 			is_manufacturer(info, REG_SAMSUNG_ELECTRO) ?
@@ -722,7 +760,7 @@ static int m5mols_init_controls(struct m5mols_info *info)
 	int ret;
 
 	/* Determine value's range & step of controls for various FW version */
-	ret = m5mols_read(sd, AE_MAX_GAIN_MON, (u32 *)&max_exposure);
+	ret = m5mols_read_u16(sd, AE_MAX_GAIN_MON, &max_exposure);
 	if (!ret)
 		step_zoom = is_manufacturer(info, REG_SAMSUNG_OPTICS) ? 31 : 1;
 	if (ret)
@@ -842,18 +880,18 @@ static void m5mols_irq_work(struct work_struct *work)
 	struct m5mols_info *info =
 		container_of(work, struct m5mols_info, work_irq);
 	struct v4l2_subdev *sd = &info->sd;
-	u32 reg;
+	u8 reg;
 	int ret;
 
 	if (!is_powered(info) ||
-			m5mols_read(sd, SYSTEM_INT_FACTOR, &info->interrupt))
+			m5mols_read_u8(sd, SYSTEM_INT_FACTOR, &info->interrupt))
 		return;
 
 	switch (info->interrupt & REG_INT_MASK) {
 	case REG_INT_AF:
 		if (!is_available_af(info))
 			break;
-		ret = m5mols_read(sd, AF_STATUS, &reg);
+		ret = m5mols_read_u8(sd, AF_STATUS, &reg);
 		v4l2_dbg(2, m5mols_debug, sd, "AF %s\n",
 			 reg == REG_AF_FAIL ? "Failed" :
 			 reg == REG_AF_SUCCESS ? "Success" :
diff --git a/drivers/media/video/m5mols/m5mols_reg.h b/drivers/media/video/m5mols/m5mols_reg.h
index b83e36fc6ac..c755bd6edfe 100644
--- a/drivers/media/video/m5mols/m5mols_reg.h
+++ b/drivers/media/video/m5mols/m5mols_reg.h
@@ -2,10 +2,10 @@
  * Register map for M-5MOLS 8M Pixel camera sensor with ISP
  *
  * Copyright (C) 2011 Samsung Electronics Co., Ltd.
- * Author: HeungJun Kim, riverful.kim@samsung.com
+ * Author: HeungJun Kim <riverful.kim@samsung.com>
  *
  * Copyright (C) 2009 Samsung Electronics Co., Ltd.
- * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com
+ * Author: Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -56,13 +56,24 @@
  * more specific contents, see definition if file m5mols.h.
  */
 #define CAT0_VER_CUSTOMER	0x00	/* customer version */
-#define CAT0_VER_AWB		0x09	/* Auto WB version */
+#define CAT0_VER_PROJECT	0x01	/* project version */
+#define CAT0_VER_FIRMWARE	0x02	/* Firmware version */
+#define CAT0_VER_HARDWARE	0x04	/* Hardware version */
+#define CAT0_VER_PARAMETER	0x06	/* Parameter version */
+#define CAT0_VER_AWB		0x08	/* Auto WB version */
 #define CAT0_VER_STRING		0x0a	/* string including M-5MOLS */
 #define CAT0_SYSMODE		0x0b	/* SYSTEM mode register */
 #define CAT0_STATUS		0x0c	/* SYSTEM mode status register */
 #define CAT0_INT_FACTOR		0x10	/* interrupt pending register */
 #define CAT0_INT_ENABLE		0x11	/* interrupt enable register */
 
+#define SYSTEM_VER_CUSTOMER	I2C_REG(CAT_SYSTEM, CAT0_VER_CUSTOMER, 1)
+#define SYSTEM_VER_PROJECT	I2C_REG(CAT_SYSTEM, CAT0_VER_PROJECT, 1)
+#define SYSTEM_VER_FIRMWARE	I2C_REG(CAT_SYSTEM, CAT0_VER_FIRMWARE, 2)
+#define SYSTEM_VER_HARDWARE	I2C_REG(CAT_SYSTEM, CAT0_VER_HARDWARE, 2)
+#define SYSTEM_VER_PARAMETER	I2C_REG(CAT_SYSTEM, CAT0_VER_PARAMETER, 2)
+#define SYSTEM_VER_AWB		I2C_REG(CAT_SYSTEM, CAT0_VER_AWB, 2)
+
 #define SYSTEM_SYSMODE		I2C_REG(CAT_SYSTEM, CAT0_SYSMODE, 1)
 #define REG_SYSINIT		0x00	/* SYSTEM mode */
 #define REG_PARAMETER		0x01	/* PARAMETER mode */
@@ -382,8 +393,8 @@
 #define REG_CAP_START_MAIN	0x01
 #define REG_CAP_START_THUMB	0x03
 
-#define CAPC_IMAGE_SIZE		I2C_REG(CAT_CAPT_CTRL, CATC_CAP_IMAGE_SIZE, 1)
-#define CAPC_THUMB_SIZE		I2C_REG(CAT_CAPT_CTRL, CATC_CAP_THUMB_SIZE, 1)
+#define CAPC_IMAGE_SIZE		I2C_REG(CAT_CAPT_CTRL, CATC_CAP_IMAGE_SIZE, 4)
+#define CAPC_THUMB_SIZE		I2C_REG(CAT_CAPT_CTRL, CATC_CAP_THUMB_SIZE, 4)
 
 /*
  * Category F - Flash
diff --git a/drivers/media/video/mx1_camera.c b/drivers/media/video/mx1_camera.c
index bc0c23a1009..63f8a0cc33d 100644
--- a/drivers/media/video/mx1_camera.c
+++ b/drivers/media/video/mx1_camera.c
@@ -444,12 +444,9 @@ static int mx1_camera_add_device(struct soc_camera_device *icd)
 {
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 	struct mx1_camera_dev *pcdev = ici->priv;
-	int ret;
 
-	if (pcdev->icd) {
-		ret = -EBUSY;
-		goto ebusy;
-	}
+	if (pcdev->icd)
+		return -EBUSY;
 
 	dev_info(icd->dev.parent, "MX1 Camera driver attached to camera %d\n",
 		 icd->devnum);
@@ -458,8 +455,7 @@ static int mx1_camera_add_device(struct soc_camera_device *icd)
 
 	pcdev->icd = icd;
 
-ebusy:
-	return ret;
+	return 0;
 }
 
 static void mx1_camera_remove_device(struct soc_camera_device *icd)
diff --git a/drivers/media/video/omap/omap_vout.c b/drivers/media/video/omap/omap_vout.c
index 4ada9be1d43..4d07c584440 100644
--- a/drivers/media/video/omap/omap_vout.c
+++ b/drivers/media/video/omap/omap_vout.c
@@ -982,6 +982,14 @@ static int omap_vout_buffer_setup(struct videobuf_queue *q, unsigned int *count,
 	startindex = (vout->vid == OMAP_VIDEO1) ?
 		video1_numbuffers : video2_numbuffers;
 
+	/* Check the size of the buffer */
+	if (*size > vout->buffer_size) {
+		v4l2_err(&vout->vid_dev->v4l2_dev,
+				"buffer allocation mismatch [%u] [%u]\n",
+				*size, vout->buffer_size);
+		return -ENOMEM;
+	}
+
 	for (i = startindex; i < *count; i++) {
 		vout->buffer_size = *size;
 
@@ -1228,6 +1236,14 @@ static int omap_vout_mmap(struct file *file, struct vm_area_struct *vma)
 				(vma->vm_pgoff << PAGE_SHIFT));
 		return -EINVAL;
 	}
+	/* Check the size of the buffer */
+	if (size > vout->buffer_size) {
+		v4l2_err(&vout->vid_dev->v4l2_dev,
+				"insufficient memory [%lu] [%u]\n",
+				size, vout->buffer_size);
+		return -ENOMEM;
+	}
+
 	q->bufs[i]->baddr = vma->vm_start;
 
 	vma->vm_flags |= VM_RESERVED;
@@ -2391,7 +2407,7 @@ static int __init omap_vout_create_video_devices(struct platform_device *pdev)
 		/* Register the Video device with V4L2
 		 */
 		vfd = vout->vfd;
-		if (video_register_device(vfd, VFL_TYPE_GRABBER, k + 1) < 0) {
+		if (video_register_device(vfd, VFL_TYPE_GRABBER, -1) < 0) {
 			dev_err(&pdev->dev, ": Could not register "
 					"Video for Linux device\n");
 			vfd->minor = -1;
diff --git a/drivers/media/video/omap/omap_voutlib.c b/drivers/media/video/omap/omap_voutlib.c
index 2aa6a76c5e5..8ae74817a11 100644
--- a/drivers/media/video/omap/omap_voutlib.c
+++ b/drivers/media/video/omap/omap_voutlib.c
@@ -193,7 +193,7 @@ int omap_vout_new_crop(struct v4l2_pix_format *pix,
 		return -EINVAL;
 
 	if (cpu_is_omap24xx()) {
-		if (crop->height != win->w.height) {
+		if (try_crop.height != win->w.height) {
 			/* If we're resizing vertically, we can't support a
 			 * crop width wider than 768 pixels.
 			 */
@@ -202,7 +202,7 @@ int omap_vout_new_crop(struct v4l2_pix_format *pix,
 		}
 	}
 	/* vertical resizing */
-	vresize = (1024 * crop->height) / win->w.height;
+	vresize = (1024 * try_crop.height) / win->w.height;
 	if (cpu_is_omap24xx() && (vresize > 2048))
 		vresize = 2048;
 	else if (cpu_is_omap34xx() && (vresize > 4096))
@@ -221,7 +221,7 @@ int omap_vout_new_crop(struct v4l2_pix_format *pix,
 			try_crop.height = 2;
 	}
 	/* horizontal resizing */
-	hresize = (1024 * crop->width) / win->w.width;
+	hresize = (1024 * try_crop.width) / win->w.width;
 	if (cpu_is_omap24xx() && (hresize > 2048))
 		hresize = 2048;
 	else if (cpu_is_omap34xx() && (hresize > 4096))
diff --git a/drivers/media/video/omap3isp/isp.c b/drivers/media/video/omap3isp/isp.c
index c9fd04ee70a..94b6ed89e19 100644
--- a/drivers/media/video/omap3isp/isp.c
+++ b/drivers/media/video/omap3isp/isp.c
@@ -1748,7 +1748,7 @@ static int isp_register_entities(struct isp_device *isp)
 		goto done;
 
 	/* Register external entities */
-	for (subdevs = pdata->subdevs; subdevs->subdevs; ++subdevs) {
+	for (subdevs = pdata->subdevs; subdevs && subdevs->subdevs; ++subdevs) {
 		struct v4l2_subdev *sensor;
 		struct media_entity *input;
 		unsigned int flags;
diff --git a/drivers/media/video/pwc/pwc-ctrl.c b/drivers/media/video/pwc/pwc-ctrl.c
index 1593f8deb81..760b4de13ad 100644
--- a/drivers/media/video/pwc/pwc-ctrl.c
+++ b/drivers/media/video/pwc/pwc-ctrl.c
@@ -1414,7 +1414,7 @@ long pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg)
 	{
 		ARG_DEF(struct pwc_probe, probe)
 
-		strcpy(ARGR(probe).name, pdev->vdev->name);
+		strcpy(ARGR(probe).name, pdev->vdev.name);
 		ARGR(probe).type = pdev->type;
 		ARG_OUT(probe)
 		break;
diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c
index 356cd42b593..b0bde5a87c8 100644
--- a/drivers/media/video/pwc/pwc-if.c
+++ b/drivers/media/video/pwc/pwc-if.c
@@ -40,7 +40,7 @@
    Oh yes, convention: to disctinguish between all the various pointers to
    device-structures, I use these names for the pointer variables:
    udev: struct usb_device *
-   vdev: struct video_device *
+   vdev: struct video_device (member of pwc_dev)
    pdev: struct pwc_devive *
 */
 
@@ -152,6 +152,7 @@ static ssize_t pwc_video_read(struct file *file, char __user *buf,
 			  size_t count, loff_t *ppos);
 static unsigned int pwc_video_poll(struct file *file, poll_table *wait);
 static int  pwc_video_mmap(struct file *file, struct vm_area_struct *vma);
+static void pwc_video_release(struct video_device *vfd);
 
 static const struct v4l2_file_operations pwc_fops = {
 	.owner =	THIS_MODULE,
@@ -164,42 +165,12 @@ static const struct v4l2_file_operations pwc_fops = {
 };
 static struct video_device pwc_template = {
 	.name =		"Philips Webcam",	/* Filled in later */
-	.release =	video_device_release,
+	.release =	pwc_video_release,
 	.fops =         &pwc_fops,
+	.ioctl_ops =	&pwc_ioctl_ops,
 };
 
 /***************************************************************************/
-
-/* Okay, this is some magic that I worked out and the reasoning behind it...
-
-   The biggest problem with any USB device is of course: "what to do
-   when the user unplugs the device while it is in use by an application?"
-   We have several options:
-   1) Curse them with the 7 plagues when they do (requires divine intervention)
-   2) Tell them not to (won't work: they'll do it anyway)
-   3) Oops the kernel (this will have a negative effect on a user's uptime)
-   4) Do something sensible.
-
-   Of course, we go for option 4.
-
-   It happens that this device will be linked to two times, once from
-   usb_device and once from the video_device in their respective 'private'
-   pointers. This is done when the device is probed() and all initialization
-   succeeded. The pwc_device struct links back to both structures.
-
-   When a device is unplugged while in use it will be removed from the
-   list of known USB devices; I also de-register it as a V4L device, but
-   unfortunately I can't free the memory since the struct is still in use
-   by the file descriptor. This free-ing is then deferend until the first
-   opportunity. Crude, but it works.
-
-   A small 'advantage' is that if a user unplugs the cam and plugs it back
-   in, it should get assigned the same video device minor, but unfortunately
-   it's non-trivial to re-link the cam back to the video device... (that
-   would surely be magic! :))
-*/
-
-/***************************************************************************/
 /* Private functions */
 
 /* Here we want the physical address of the memory.
@@ -1016,16 +987,15 @@ static ssize_t show_snapshot_button_status(struct device *class_dev,
 static DEVICE_ATTR(button, S_IRUGO | S_IWUSR, show_snapshot_button_status,
 		   NULL);
 
-static int pwc_create_sysfs_files(struct video_device *vdev)
+static int pwc_create_sysfs_files(struct pwc_device *pdev)
 {
-	struct pwc_device *pdev = video_get_drvdata(vdev);
 	int rc;
 
-	rc = device_create_file(&vdev->dev, &dev_attr_button);
+	rc = device_create_file(&pdev->vdev.dev, &dev_attr_button);
 	if (rc)
 		goto err;
 	if (pdev->features & FEATURE_MOTOR_PANTILT) {
-		rc = device_create_file(&vdev->dev, &dev_attr_pan_tilt);
+		rc = device_create_file(&pdev->vdev.dev, &dev_attr_pan_tilt);
 		if (rc)
 			goto err_button;
 	}
@@ -1033,19 +1003,17 @@ static int pwc_create_sysfs_files(struct video_device *vdev)
 	return 0;
 
 err_button:
-	device_remove_file(&vdev->dev, &dev_attr_button);
+	device_remove_file(&pdev->vdev.dev, &dev_attr_button);
 err:
 	PWC_ERROR("Could not create sysfs files.\n");
 	return rc;
 }
 
-static void pwc_remove_sysfs_files(struct video_device *vdev)
+static void pwc_remove_sysfs_files(struct pwc_device *pdev)
 {
-	struct pwc_device *pdev = video_get_drvdata(vdev);
-
 	if (pdev->features & FEATURE_MOTOR_PANTILT)
-		device_remove_file(&vdev->dev, &dev_attr_pan_tilt);
-	device_remove_file(&vdev->dev, &dev_attr_button);
+		device_remove_file(&pdev->vdev.dev, &dev_attr_pan_tilt);
+	device_remove_file(&pdev->vdev.dev, &dev_attr_button);
 }
 
 #ifdef CONFIG_USB_PWC_DEBUG
@@ -1106,7 +1074,7 @@ static int pwc_video_open(struct file *file)
 		if (ret >= 0)
 		{
 			PWC_DEBUG_OPEN("This %s camera is equipped with a %s (%d).\n",
-					pdev->vdev->name,
+					pdev->vdev.name,
 					pwc_sensor_type_to_string(i), i);
 		}
 	}
@@ -1180,16 +1148,15 @@ static int pwc_video_open(struct file *file)
 	return 0;
 }
 
-
-static void pwc_cleanup(struct pwc_device *pdev)
+static void pwc_video_release(struct video_device *vfd)
 {
-	pwc_remove_sysfs_files(pdev->vdev);
-	video_unregister_device(pdev->vdev);
+	struct pwc_device *pdev = container_of(vfd, struct pwc_device, vdev);
+	int hint;
 
-#ifdef CONFIG_USB_PWC_INPUT_EVDEV
-	if (pdev->button_dev)
-		input_unregister_device(pdev->button_dev);
-#endif
+	/* search device_hint[] table if we occupy a slot, by any chance */
+	for (hint = 0; hint < MAX_DEV_HINTS; hint++)
+		if (device_hint[hint].pdev == pdev)
+			device_hint[hint].pdev = NULL;
 
 	kfree(pdev);
 }
@@ -1199,7 +1166,7 @@ static int pwc_video_close(struct file *file)
 {
 	struct video_device *vdev = file->private_data;
 	struct pwc_device *pdev;
-	int i, hint;
+	int i;
 
 	PWC_DEBUG_OPEN(">> video_close called(vdev = 0x%p).\n", vdev);
 
@@ -1234,12 +1201,6 @@ static int pwc_video_close(struct file *file)
 		}
 		pdev->vopen--;
 		PWC_DEBUG_OPEN("<< video_close() vopen=%d\n", pdev->vopen);
-	} else {
-		pwc_cleanup(pdev);
-		/* search device_hint[] table if we occupy a slot, by any chance */
-		for (hint = 0; hint < MAX_DEV_HINTS; hint++)
-			if (device_hint[hint].pdev == pdev)
-				device_hint[hint].pdev = NULL;
 	}
 
 	return 0;
@@ -1715,19 +1676,12 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id
 	init_waitqueue_head(&pdev->frameq);
 	pdev->vcompression = pwc_preferred_compression;
 
-	/* Allocate video_device structure */
-	pdev->vdev = video_device_alloc();
-	if (!pdev->vdev) {
-		PWC_ERROR("Err, cannot allocate video_device struture. Failing probe.");
-		rc = -ENOMEM;
-		goto err_free_mem;
-	}
-	memcpy(pdev->vdev, &pwc_template, sizeof(pwc_template));
-	pdev->vdev->parent = &intf->dev;
-	pdev->vdev->lock = &pdev->modlock;
-	pdev->vdev->ioctl_ops = &pwc_ioctl_ops;
-	strcpy(pdev->vdev->name, name);
-	video_set_drvdata(pdev->vdev, pdev);
+	/* Init video_device structure */
+	memcpy(&pdev->vdev, &pwc_template, sizeof(pwc_template));
+	pdev->vdev.parent = &intf->dev;
+	pdev->vdev.lock = &pdev->modlock;
+	strcpy(pdev->vdev.name, name);
+	video_set_drvdata(&pdev->vdev, pdev);
 
 	pdev->release = le16_to_cpu(udev->descriptor.bcdDevice);
 	PWC_DEBUG_PROBE("Release: %04x\n", pdev->release);
@@ -1746,8 +1700,6 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id
 		}
 	}
 
-	pdev->vdev->release = video_device_release;
-
 	/* occupy slot */
 	if (hint < MAX_DEV_HINTS)
 		device_hint[hint].pdev = pdev;
@@ -1759,16 +1711,16 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id
 	pwc_set_leds(pdev, 0, 0);
 	pwc_camera_power(pdev, 0);
 
-	rc = video_register_device(pdev->vdev, VFL_TYPE_GRABBER, video_nr);
+	rc = video_register_device(&pdev->vdev, VFL_TYPE_GRABBER, video_nr);
 	if (rc < 0) {
 		PWC_ERROR("Failed to register as video device (%d).\n", rc);
-		goto err_video_release;
+		goto err_free_mem;
 	}
-	rc = pwc_create_sysfs_files(pdev->vdev);
+	rc = pwc_create_sysfs_files(pdev);
 	if (rc)
 		goto err_video_unreg;
 
-	PWC_INFO("Registered as %s.\n", video_device_node_name(pdev->vdev));
+	PWC_INFO("Registered as %s.\n", video_device_node_name(&pdev->vdev));
 
 #ifdef CONFIG_USB_PWC_INPUT_EVDEV
 	/* register webcam snapshot button input device */
@@ -1776,7 +1728,7 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id
 	if (!pdev->button_dev) {
 		PWC_ERROR("Err, insufficient memory for webcam snapshot button device.");
 		rc = -ENOMEM;
-		pwc_remove_sysfs_files(pdev->vdev);
+		pwc_remove_sysfs_files(pdev);
 		goto err_video_unreg;
 	}
 
@@ -1794,7 +1746,7 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id
 	if (rc) {
 		input_free_device(pdev->button_dev);
 		pdev->button_dev = NULL;
-		pwc_remove_sysfs_files(pdev->vdev);
+		pwc_remove_sysfs_files(pdev);
 		goto err_video_unreg;
 	}
 #endif
@@ -1804,10 +1756,7 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id
 err_video_unreg:
 	if (hint < MAX_DEV_HINTS)
 		device_hint[hint].pdev = NULL;
-	video_unregister_device(pdev->vdev);
-	pdev->vdev = NULL;	/* So we don't try to release it below */
-err_video_release:
-	video_device_release(pdev->vdev);
+	video_unregister_device(&pdev->vdev);
 err_free_mem:
 	kfree(pdev);
 	return rc;
@@ -1816,10 +1765,8 @@ err_free_mem:
 /* The user yanked out the cable... */
 static void usb_pwc_disconnect(struct usb_interface *intf)
 {
-	struct pwc_device *pdev;
-	int hint;
+	struct pwc_device *pdev  = usb_get_intfdata(intf);
 
-	pdev = usb_get_intfdata (intf);
 	mutex_lock(&pdev->modlock);
 	usb_set_intfdata (intf, NULL);
 	if (pdev == NULL) {
@@ -1836,30 +1783,25 @@ static void usb_pwc_disconnect(struct usb_interface *intf)
 	}
 
 	/* We got unplugged; this is signalled by an EPIPE error code */
-	if (pdev->vopen) {
-		PWC_INFO("Disconnected while webcam is in use!\n");
-		pdev->error_status = EPIPE;
-	}
+	pdev->error_status = EPIPE;
+	pdev->unplugged = 1;
 
 	/* Alert waiting processes */
 	wake_up_interruptible(&pdev->frameq);
-	/* Wait until device is closed */
-	if (pdev->vopen) {
-		pdev->unplugged = 1;
-		pwc_iso_stop(pdev);
-	} else {
-		/* Device is closed, so we can safely unregister it */
-		PWC_DEBUG_PROBE("Unregistering video device in disconnect().\n");
 
-disconnect_out:
-		/* search device_hint[] table if we occupy a slot, by any chance */
-		for (hint = 0; hint < MAX_DEV_HINTS; hint++)
-			if (device_hint[hint].pdev == pdev)
-				device_hint[hint].pdev = NULL;
-	}
+	/* No need to keep the urbs around after disconnection */
+	pwc_isoc_cleanup(pdev);
 
+disconnect_out:
 	mutex_unlock(&pdev->modlock);
-	pwc_cleanup(pdev);
+
+	pwc_remove_sysfs_files(pdev);
+	video_unregister_device(&pdev->vdev);
+
+#ifdef CONFIG_USB_PWC_INPUT_EVDEV
+	if (pdev->button_dev)
+		input_unregister_device(pdev->button_dev);
+#endif
 }
 
 
diff --git a/drivers/media/video/pwc/pwc.h b/drivers/media/video/pwc/pwc.h
index e947766337d..083f8b15df7 100644
--- a/drivers/media/video/pwc/pwc.h
+++ b/drivers/media/video/pwc/pwc.h
@@ -162,9 +162,9 @@ struct pwc_imgbuf
 
 struct pwc_device
 {
-   struct video_device *vdev;
+	struct video_device vdev;
 
-   /* Pointer to our usb_device */
+   /* Pointer to our usb_device, may be NULL after unplug */
    struct usb_device *udev;
 
    int type;                    /* type of cam (645, 646, 675, 680, 690, 720, 730, 740, 750) */
diff --git a/drivers/media/video/s5p-fimc/fimc-capture.c b/drivers/media/video/s5p-fimc/fimc-capture.c
index d142b40ea64..81b4a826ee5 100644
--- a/drivers/media/video/s5p-fimc/fimc-capture.c
+++ b/drivers/media/video/s5p-fimc/fimc-capture.c
@@ -1,7 +1,7 @@
 /*
- * Samsung S5P SoC series camera interface (camera capture) driver
+ * Samsung S5P/EXYNOS4 SoC series camera interface (camera capture) driver
  *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd
+ * Copyright (C) 2010 - 2011 Samsung Electronics Co., Ltd.
  * Author: Sylwester Nawrocki, <s.nawrocki@samsung.com>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -262,12 +262,7 @@ static unsigned int get_plane_size(struct fimc_frame *fr, unsigned int plane)
 {
 	if (!fr || plane >= fr->fmt->memplanes)
 		return 0;
-
-	dbg("%s: w: %d. h: %d. depth[%d]: %d",
-	    __func__, fr->width, fr->height, plane, fr->fmt->depth[plane]);
-
 	return fr->f_width * fr->f_height * fr->fmt->depth[plane] / 8;
-
 }
 
 static int queue_setup(struct vb2_queue *vq, unsigned int *num_buffers,
@@ -283,24 +278,14 @@ static int queue_setup(struct vb2_queue *vq, unsigned int *num_buffers,
 
 	*num_planes = fmt->memplanes;
 
-	dbg("%s, buffer count=%d, plane count=%d",
-	    __func__, *num_buffers, *num_planes);
-
 	for (i = 0; i < fmt->memplanes; i++) {
 		sizes[i] = get_plane_size(&ctx->d_frame, i);
-		dbg("plane: %u, plane_size: %lu", i, sizes[i]);
 		allocators[i] = ctx->fimc_dev->alloc_ctx;
 	}
 
 	return 0;
 }
 
-static int buffer_init(struct vb2_buffer *vb)
-{
-	/* TODO: */
-	return 0;
-}
-
 static int buffer_prepare(struct vb2_buffer *vb)
 {
 	struct vb2_queue *vq = vb->vb2_queue;
@@ -380,7 +365,6 @@ static struct vb2_ops fimc_capture_qops = {
 	.queue_setup		= queue_setup,
 	.buf_prepare		= buffer_prepare,
 	.buf_queue		= buffer_queue,
-	.buf_init		= buffer_init,
 	.wait_prepare		= fimc_unlock,
 	.wait_finish		= fimc_lock,
 	.start_streaming	= start_streaming,
@@ -903,6 +887,7 @@ err_vd_reg:
 err_v4l2_reg:
 	v4l2_device_unregister(v4l2_dev);
 err_info:
+	kfree(ctx);
 	dev_err(&fimc->pdev->dev, "failed to install\n");
 	return ret;
 }
diff --git a/drivers/media/video/s5p-fimc/fimc-core.c b/drivers/media/video/s5p-fimc/fimc-core.c
index dc91a8511af..bdf19ada917 100644
--- a/drivers/media/video/s5p-fimc/fimc-core.c
+++ b/drivers/media/video/s5p-fimc/fimc-core.c
@@ -1,9 +1,8 @@
 /*
- * S5P camera interface (video postprocessor) driver
+ * Samsung S5P/EXYNOS4 SoC series camera interface (video postprocessor) driver
  *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd
- *
- * Sylwester Nawrocki, <s.nawrocki@samsung.com>
+ * Copyright (C) 2010-2011 Samsung Electronics Co., Ltd.
+ * Contact: Sylwester Nawrocki, <s.nawrocki@samsung.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published
@@ -42,7 +41,6 @@ static struct fimc_fmt fimc_formats[] = {
 		.color		= S5P_FIMC_RGB565,
 		.memplanes	= 1,
 		.colplanes	= 1,
-		.mbus_code	= V4L2_MBUS_FMT_RGB565_2X8_BE,
 		.flags		= FMT_FLAGS_M2M,
 	}, {
 		.name		= "BGR666",
@@ -232,11 +230,7 @@ static int fimc_get_scaler_factor(u32 src, u32 tar, u32 *ratio, u32 *shift)
 			return 0;
 		}
 	}
-
 	*shift = 0, *ratio = 1;
-
-	dbg("s: %d, t: %d, shift: %d, ratio: %d",
-	    src, tar, *shift, *ratio);
 	return 0;
 }
 
@@ -268,10 +262,8 @@ int fimc_set_scaler_info(struct fimc_ctx *ctx)
 		err("invalid source size: %d x %d", sx, sy);
 		return -EINVAL;
 	}
-
 	sc->real_width = sx;
 	sc->real_height = sy;
-	dbg("sx= %d, sy= %d, tx= %d, ty= %d", sx, sy, tx, ty);
 
 	ret = fimc_get_scaler_factor(sx, tx, &sc->pre_hratio, &sc->hfactor);
 	if (ret)
@@ -711,22 +703,18 @@ static int fimc_queue_setup(struct vb2_queue *vq, unsigned int *num_buffers,
 	f = ctx_get_frame(ctx, vq->type);
 	if (IS_ERR(f))
 		return PTR_ERR(f);
-
 	/*
 	 * Return number of non-contigous planes (plane buffers)
 	 * depending on the configured color format.
 	 */
-	if (f->fmt)
-		*num_planes = f->fmt->memplanes;
+	if (!f->fmt)
+		return -EINVAL;
 
+	*num_planes = f->fmt->memplanes;
 	for (i = 0; i < f->fmt->memplanes; i++) {
-		sizes[i] = (f->width * f->height * f->fmt->depth[i]) >> 3;
+		sizes[i] = (f->f_width * f->f_height * f->fmt->depth[i]) / 8;
 		allocators[i] = ctx->fimc_dev->alloc_ctx;
 	}
-
-	if (*num_buffers == 0)
-		*num_buffers = 1;
-
 	return 0;
 }
 
@@ -852,7 +840,7 @@ struct fimc_fmt *find_format(struct v4l2_format *f, unsigned int mask)
 
 	for (i = 0; i < ARRAY_SIZE(fimc_formats); ++i) {
 		fmt = &fimc_formats[i];
-		if (fmt->fourcc == f->fmt.pix.pixelformat &&
+		if (fmt->fourcc == f->fmt.pix_mp.pixelformat &&
 		   (fmt->flags & mask))
 			break;
 	}
diff --git a/drivers/media/video/s5p-fimc/fimc-core.h b/drivers/media/video/s5p-fimc/fimc-core.h
index 3beb1e5320c..1f70772daaf 100644
--- a/drivers/media/video/s5p-fimc/fimc-core.h
+++ b/drivers/media/video/s5p-fimc/fimc-core.h
@@ -1,7 +1,5 @@
 /*
- * Copyright (c) 2010 Samsung Electronics
- *
- * Sylwester Nawrocki, <s.nawrocki@samsung.com>
+ * Copyright (C) 2010 - 2011 Samsung Electronics Co., Ltd.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -135,9 +133,10 @@ enum fimc_color_fmt {
  * @name: format description
  * @fourcc: the fourcc code for this format, 0 if not applicable
  * @color: the corresponding fimc_color_fmt
- * @depth: per plane driver's private 'number of bits per pixel'
  * @memplanes: number of physically non-contiguous data planes
  * @colplanes: number of physically contiguous data planes
+ * @depth: per plane driver's private 'number of bits per pixel'
+ * @flags: flags indicating which operation mode format applies to
  */
 struct fimc_fmt {
 	enum v4l2_mbus_pixelcode mbus_code;
@@ -171,7 +170,7 @@ struct fimc_dma_offset {
 };
 
 /**
- * struct fimc_effect - the configuration data for the "Arbitrary" image effect
+ * struct fimc_effect - color effect information
  * @type:	effect type
  * @pat_cb:	cr value when type is "arbitrary"
  * @pat_cr:	cr value when type is "arbitrary"
@@ -184,7 +183,6 @@ struct fimc_effect {
 
 /**
  * struct fimc_scaler - the configuration data for FIMC inetrnal scaler
- *
  * @scaleup_h:		flag indicating scaling up horizontally
  * @scaleup_v:		flag indicating scaling up vertically
  * @copy_mode:		flag indicating transparent DMA transfer (no scaling
@@ -220,7 +218,6 @@ struct fimc_scaler {
 
 /**
  * struct fimc_addr - the FIMC physical address set for DMA
- *
  * @y:	 luminance plane physical address
  * @cb:	 Cb plane physical address
  * @cr:	 Cr plane physical address
@@ -234,6 +231,7 @@ struct fimc_addr {
 /**
  * struct fimc_vid_buffer - the driver's video buffer
  * @vb:    v4l videobuf buffer
+ * @list:  linked list structure for buffer queue
  * @paddr: precalculated physical address set
  * @index: buffer index for the output DMA engine
  */
@@ -254,11 +252,10 @@ struct fimc_vid_buffer {
  * @offs_v:	image vertical pixel offset
  * @width:	image pixel width
  * @height:	image pixel weight
- * @paddr:	image frame buffer physical addresses
- * @buf_cnt:	number of buffers depending on a color format
  * @payload:	image size in bytes (w x h x bpp)
- * @color:	color format
+ * @paddr:	image frame buffer physical addresses
  * @dma_offset:	DMA offset in bytes
+ * @fmt:	fimc color format pointer
  */
 struct fimc_frame {
 	u32	f_width;
@@ -390,21 +387,22 @@ struct fimc_ctx;
 
 /**
  * struct fimc_dev - abstraction for FIMC entity
- *
  * @slock:	the spinlock protecting this data structure
  * @lock:	the mutex protecting this data structure
  * @pdev:	pointer to the FIMC platform device
  * @pdata:	pointer to the device platform data
+ * @variant:	the IP variant information
  * @id:		FIMC device index (0..FIMC_MAX_DEVS)
  * @num_clocks: the number of clocks managed by this device instance
- * @clock[]:	the clocks required for FIMC operation
+ * @clock:	clocks required for FIMC operation
  * @regs:	the mapped hardware registers
  * @regs_res:	the resource claimed for IO registers
- * @irq:	interrupt number of the FIMC subdevice
- * @irq_queue:
+ * @irq:	FIMC interrupt number
+ * @irq_queue:	interrupt handler waitqueue
  * @m2m:	memory-to-memory V4L2 device information
  * @vid_cap:	camera capture device information
  * @state:	flags used to synchronize m2m and capture mode operation
+ * @alloc_ctx:	videobuf2 memory allocator context
  */
 struct fimc_dev {
 	spinlock_t			slock;
@@ -427,8 +425,7 @@ struct fimc_dev {
 
 /**
  * fimc_ctx - the device context data
- *
- * @lock:		mutex protecting this data structure
+ * @slock:		spinlock protecting this data structure
  * @s_frame:		source frame properties
  * @d_frame:		destination frame properties
  * @out_order_1p:	output 1-plane YCBCR order
diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
index ff6c0e97563..d4ee24bf692 100644
--- a/drivers/media/video/saa7134/saa7134-input.c
+++ b/drivers/media/video/saa7134/saa7134-input.c
@@ -963,7 +963,7 @@ static int saa7134_raw_decode_irq(struct saa7134_dev *dev)
 	 * to work with other protocols.
 	 */
 	if (!ir->active) {
-		timeout = jiffies + jiffies_to_msecs(15);
+		timeout = jiffies + msecs_to_jiffies(15);
 		mod_timer(&ir->timer, timeout);
 		ir->active = true;
 	}
diff --git a/drivers/media/video/uvc/uvc_entity.c b/drivers/media/video/uvc/uvc_entity.c
index c3ab0c813be..48fea373c25 100644
--- a/drivers/media/video/uvc/uvc_entity.c
+++ b/drivers/media/video/uvc/uvc_entity.c
@@ -27,14 +27,20 @@ static int uvc_mc_register_entity(struct uvc_video_chain *chain,
 	struct uvc_entity *entity)
 {
 	const u32 flags = MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE;
-	struct uvc_entity *remote;
+	struct media_entity *sink;
 	unsigned int i;
-	u8 remote_pad;
-	int ret = 0;
+	int ret;
+
+	sink = (UVC_ENTITY_TYPE(entity) == UVC_TT_STREAMING)
+	     ? (entity->vdev ? &entity->vdev->entity : NULL)
+	     : &entity->subdev.entity;
+	if (sink == NULL)
+		return 0;
 
 	for (i = 0; i < entity->num_pads; ++i) {
 		struct media_entity *source;
-		struct media_entity *sink;
+		struct uvc_entity *remote;
+		u8 remote_pad;
 
 		if (!(entity->pads[i].flags & MEDIA_PAD_FL_SINK))
 			continue;
@@ -43,10 +49,11 @@ static int uvc_mc_register_entity(struct uvc_video_chain *chain,
 		if (remote == NULL)
 			return -EINVAL;
 
-		source = (UVC_ENTITY_TYPE(remote) == UVC_TT_STREAMING)
-		       ? &remote->vdev->entity : &remote->subdev.entity;
-		sink = (UVC_ENTITY_TYPE(entity) == UVC_TT_STREAMING)
-		     ? &entity->vdev->entity : &entity->subdev.entity;
+		source = (UVC_ENTITY_TYPE(remote) != UVC_TT_STREAMING)
+		       ? (remote->vdev ? &remote->vdev->entity : NULL)
+		       : &remote->subdev.entity;
+		if (source == NULL)
+			continue;
 
 		remote_pad = remote->num_pads - 1;
 		ret = media_entity_create_link(source, remote_pad,
@@ -55,11 +62,10 @@ static int uvc_mc_register_entity(struct uvc_video_chain *chain,
 			return ret;
 	}
 
-	if (UVC_ENTITY_TYPE(entity) != UVC_TT_STREAMING)
-		ret = v4l2_device_register_subdev(&chain->dev->vdev,
-						  &entity->subdev);
+	if (UVC_ENTITY_TYPE(entity) == UVC_TT_STREAMING)
+		return 0;
 
-	return ret;
+	return v4l2_device_register_subdev(&chain->dev->vdev, &entity->subdev);
 }
 
 static struct v4l2_subdev_ops uvc_subdev_ops = {
@@ -84,9 +90,11 @@ static int uvc_mc_init_entity(struct uvc_entity *entity)
 
 		ret = media_entity_init(&entity->subdev.entity,
 					entity->num_pads, entity->pads, 0);
-	} else
+	} else if (entity->vdev != NULL) {
 		ret = media_entity_init(&entity->vdev->entity,
 					entity->num_pads, entity->pads, 0);
+	} else
+		ret = 0;
 
 	return ret;
 }
diff --git a/drivers/media/video/uvc/uvc_queue.c b/drivers/media/video/uvc/uvc_queue.c
index 109a06384a8..f90ce9fce53 100644
--- a/drivers/media/video/uvc/uvc_queue.c
+++ b/drivers/media/video/uvc/uvc_queue.c
@@ -104,6 +104,8 @@ static int __uvc_free_buffers(struct uvc_video_queue *queue)
 	}
 
 	if (queue->count) {
+		uvc_queue_cancel(queue, 0);
+		INIT_LIST_HEAD(&queue->mainqueue);
 		vfree(queue->mem);
 		queue->count = 0;
 	}
diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c
index fc766b9f24c..49994793cc7 100644
--- a/drivers/media/video/uvc/uvc_video.c
+++ b/drivers/media/video/uvc/uvc_video.c
@@ -1255,8 +1255,10 @@ int uvc_video_enable(struct uvc_streaming *stream, int enable)
 
 	/* Commit the streaming parameters. */
 	ret = uvc_commit_video(stream, &stream->ctrl);
-	if (ret < 0)
+	if (ret < 0) {
+		uvc_queue_enable(&stream->queue, 0);
 		return ret;
+	}
 
 	return uvc_init_video(stream, GFP_KERNEL);
 }
diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c
index 19d5ae29378..06f14008b34 100644
--- a/drivers/media/video/v4l2-dev.c
+++ b/drivers/media/video/v4l2-dev.c
@@ -167,6 +167,12 @@ static void v4l2_device_release(struct device *cd)
 
 	mutex_unlock(&videodev_lock);
 
+#if defined(CONFIG_MEDIA_CONTROLLER)
+	if (vdev->v4l2_dev && vdev->v4l2_dev->mdev &&
+	    vdev->vfl_type != VFL_TYPE_SUBDEV)
+		media_device_unregister_entity(&vdev->entity);
+#endif
+
 	/* Release video_device and perform other
 	   cleanups as needed. */
 	vdev->release(vdev);
@@ -389,9 +395,6 @@ static int v4l2_mmap(struct file *filp, struct vm_area_struct *vm)
 static int v4l2_open(struct inode *inode, struct file *filp)
 {
 	struct video_device *vdev;
-#if defined(CONFIG_MEDIA_CONTROLLER)
-	struct media_entity *entity = NULL;
-#endif
 	int ret = 0;
 
 	/* Check if the video device is available */
@@ -405,17 +408,6 @@ static int v4l2_open(struct inode *inode, struct file *filp)
 	/* and increase the device refcount */
 	video_get(vdev);
 	mutex_unlock(&videodev_lock);
-#if defined(CONFIG_MEDIA_CONTROLLER)
-	if (vdev->v4l2_dev && vdev->v4l2_dev->mdev &&
-	    vdev->vfl_type != VFL_TYPE_SUBDEV) {
-		entity = media_entity_get(&vdev->entity);
-		if (!entity) {
-			ret = -EBUSY;
-			video_put(vdev);
-			return ret;
-		}
-	}
-#endif
 	if (vdev->fops->open) {
 		if (vdev->lock && mutex_lock_interruptible(vdev->lock)) {
 			ret = -ERESTARTSYS;
@@ -431,14 +423,8 @@ static int v4l2_open(struct inode *inode, struct file *filp)
 
 err:
 	/* decrease the refcount in case of an error */
-	if (ret) {
-#if defined(CONFIG_MEDIA_CONTROLLER)
-		if (vdev->v4l2_dev && vdev->v4l2_dev->mdev &&
-		    vdev->vfl_type != VFL_TYPE_SUBDEV)
-			media_entity_put(entity);
-#endif
+	if (ret)
 		video_put(vdev);
-	}
 	return ret;
 }
 
@@ -455,11 +441,6 @@ static int v4l2_release(struct inode *inode, struct file *filp)
 		if (vdev->lock)
 			mutex_unlock(vdev->lock);
 	}
-#if defined(CONFIG_MEDIA_CONTROLLER)
-	if (vdev->v4l2_dev && vdev->v4l2_dev->mdev &&
-	    vdev->vfl_type != VFL_TYPE_SUBDEV)
-		media_entity_put(&vdev->entity);
-#endif
 	/* decrease the refcount unconditionally since the release()
 	   return value is ignored. */
 	video_put(vdev);
@@ -754,12 +735,6 @@ void video_unregister_device(struct video_device *vdev)
 	if (!vdev || !video_is_registered(vdev))
 		return;
 
-#if defined(CONFIG_MEDIA_CONTROLLER)
-	if (vdev->v4l2_dev && vdev->v4l2_dev->mdev &&
-	    vdev->vfl_type != VFL_TYPE_SUBDEV)
-		media_device_unregister_entity(&vdev->entity);
-#endif
-
 	mutex_lock(&videodev_lock);
 	/* This must be in a critical section to prevent a race with v4l2_open.
 	 * Once this bit has been cleared video_get may never be called again.
diff --git a/drivers/media/video/videobuf2-core.c b/drivers/media/video/videobuf2-core.c
index 6ba1461d51e..3015e600094 100644
--- a/drivers/media/video/videobuf2-core.c
+++ b/drivers/media/video/videobuf2-core.c
@@ -492,13 +492,6 @@ int vb2_reqbufs(struct vb2_queue *q, struct v4l2_requestbuffers *req)
 		return -EINVAL;
 	}
 
-	/*
-	 * If the same number of buffers and memory access method is requested
-	 * then return immediately.
-	 */
-	if (q->memory == req->memory && req->count == q->num_buffers)
-		return 0;
-
 	if (req->count == 0 || q->num_buffers != 0 || q->memory != req->memory) {
 		/*
 		 * We already have buffers allocated, so first check if they
@@ -539,9 +532,9 @@ int vb2_reqbufs(struct vb2_queue *q, struct v4l2_requestbuffers *req)
 	/* Finally, allocate buffers and video memory */
 	ret = __vb2_queue_alloc(q, req->memory, num_buffers, num_planes,
 				plane_sizes);
-	if (ret < 0) {
-		dprintk(1, "Memory allocation failed with error: %d\n", ret);
-		return ret;
+	if (ret == 0) {
+		dprintk(1, "Memory allocation failed\n");
+		return -ENOMEM;
 	}
 
 	/*
@@ -1196,6 +1189,7 @@ static void __vb2_queue_cancel(struct vb2_queue *q)
 	 * has not already dequeued before initiating cancel.
 	 */
 	INIT_LIST_HEAD(&q->done_list);
+	atomic_set(&q->queued_count, 0);
 	wake_up_all(&q->done_wq);
 
 	/*
diff --git a/drivers/media/video/videobuf2-dma-sg.c b/drivers/media/video/videobuf2-dma-sg.c
index b2d9485aac7..10a20d9509d 100644
--- a/drivers/media/video/videobuf2-dma-sg.c
+++ b/drivers/media/video/videobuf2-dma-sg.c
@@ -62,7 +62,7 @@ static void *vb2_dma_sg_alloc(void *alloc_ctx, unsigned long size)
 		goto fail_pages_array_alloc;
 
 	for (i = 0; i < buf->sg_desc.num_pages; ++i) {
-		buf->pages[i] = alloc_page(GFP_KERNEL | __GFP_ZERO);
+		buf->pages[i] = alloc_page(GFP_KERNEL | __GFP_ZERO | __GFP_NOWARN);
 		if (NULL == buf->pages[i])
 			goto fail_pages_alloc;
 		sg_set_page(&buf->sg_desc.sglist[i],
diff --git a/drivers/staging/lirc/lirc_imon.c b/drivers/staging/lirc/lirc_imon.c
index 4039eda2a15..4a9e563f40f 100644
--- a/drivers/staging/lirc/lirc_imon.c
+++ b/drivers/staging/lirc/lirc_imon.c
@@ -672,8 +672,6 @@ static void imon_incoming_packet(struct imon_context *context,
 static void usb_rx_callback(struct urb *urb)
 {
 	struct imon_context *context;
-	unsigned char *buf;
-	int len;
 	int intfnum = 0;
 
 	if (!urb)
@@ -683,9 +681,6 @@ static void usb_rx_callback(struct urb *urb)
 	if (!context)
 		return;
 
-	buf = urb->transfer_buffer;
-	len = urb->actual_length;
-
 	switch (urb->status) {
 	case -ENOENT:		/* usbcore unlink successful! */
 		return;
@@ -728,7 +723,6 @@ static int imon_probe(struct usb_interface *interface,
 	int ir_ep_found = 0;
 	int alloc_status = 0;
 	int vfd_proto_6p = 0;
-	int code_length;
 	struct imon_context *context = NULL;
 	int i;
 	u16 vendor, product;
@@ -749,8 +743,6 @@ static int imon_probe(struct usb_interface *interface,
 	else
 		context->display = 1;
 
-	code_length = BUF_CHUNK_SIZE * 8;
-
 	usbdev     = usb_get_dev(interface_to_usbdev(interface));
 	iface_desc = interface->cur_altsetting;
 	num_endpts = iface_desc->desc.bNumEndpoints;
@@ -856,7 +848,7 @@ static int imon_probe(struct usb_interface *interface,
 
 	strcpy(driver->name, MOD_NAME);
 	driver->minor = -1;
-	driver->code_length = sizeof(int) * 8;
+	driver->code_length = BUF_CHUNK_SIZE * 8;
 	driver->sample_rate = 0;
 	driver->features = LIRC_CAN_REC_MODE2;
 	driver->data = context;
diff --git a/drivers/staging/lirc/lirc_serial.c b/drivers/staging/lirc/lirc_serial.c
index 4a3cca03224..805df913bb6 100644
--- a/drivers/staging/lirc/lirc_serial.c
+++ b/drivers/staging/lirc/lirc_serial.c
@@ -838,7 +838,23 @@ static int hardware_init_port(void)
 
 static int init_port(void)
 {
-	int i, nlow, nhigh;
+	int i, nlow, nhigh, result;
+
+	result = request_irq(irq, irq_handler,
+			     IRQF_DISABLED | (share_irq ? IRQF_SHARED : 0),
+			     LIRC_DRIVER_NAME, (void *)&hardware);
+
+	switch (result) {
+	case -EBUSY:
+		printk(KERN_ERR LIRC_DRIVER_NAME ": IRQ %d busy\n", irq);
+		return -EBUSY;
+	case -EINVAL:
+		printk(KERN_ERR LIRC_DRIVER_NAME
+		       ": Bad irq number or handler\n");
+		return -EINVAL;
+	default:
+		break;
+	};
 
 	/* Reserve io region. */
 	/*
@@ -893,34 +909,17 @@ static int init_port(void)
 		printk(KERN_INFO LIRC_DRIVER_NAME  ": Manually using active "
 		       "%s receiver\n", sense ? "low" : "high");
 
+	dprintk("Interrupt %d, port %04x obtained\n", irq, io);
 	return 0;
 }
 
 static int set_use_inc(void *data)
 {
-	int result;
 	unsigned long flags;
 
 	/* initialize timestamp */
 	do_gettimeofday(&lasttv);
 
-	result = request_irq(irq, irq_handler,
-			     IRQF_DISABLED | (share_irq ? IRQF_SHARED : 0),
-			     LIRC_DRIVER_NAME, (void *)&hardware);
-
-	switch (result) {
-	case -EBUSY:
-		printk(KERN_ERR LIRC_DRIVER_NAME ": IRQ %d busy\n", irq);
-		return -EBUSY;
-	case -EINVAL:
-		printk(KERN_ERR LIRC_DRIVER_NAME
-		       ": Bad irq number or handler\n");
-		return -EINVAL;
-	default:
-		dprintk("Interrupt %d, port %04x obtained\n", irq, io);
-		break;
-	}
-
 	spin_lock_irqsave(&hardware[type].lock, flags);
 
 	/* Set DLAB 0. */
@@ -945,10 +944,6 @@ static void set_use_dec(void *data)
 	soutp(UART_IER, sinp(UART_IER) &
 	      (~(UART_IER_MSI|UART_IER_RLSI|UART_IER_THRI|UART_IER_RDI)));
 	spin_unlock_irqrestore(&hardware[type].lock, flags);
-
-	free_irq(irq, (void *)&hardware);
-
-	dprintk("freed IRQ %d\n", irq);
 }
 
 static ssize_t lirc_write(struct file *file, const char *buf,
@@ -1256,6 +1251,9 @@ exit_serial_exit:
 static void __exit lirc_serial_exit_module(void)
 {
 	lirc_serial_exit();
+
+	free_irq(irq, (void *)&hardware);
+
 	if (iommap != 0)
 		release_mem_region(iommap, 8 << ioshift);
 	else
diff --git a/drivers/staging/lirc/lirc_sir.c b/drivers/staging/lirc/lirc_sir.c
index a7b46f24f24..0d3864594b1 100644
--- a/drivers/staging/lirc/lirc_sir.c
+++ b/drivers/staging/lirc/lirc_sir.c
@@ -739,23 +739,16 @@ static void send_space(unsigned long len)
 static void send_pulse(unsigned long len)
 {
 	long bytes_out = len / TIME_CONST;
-	long time_left;
 
-	time_left = (long)len - (long)bytes_out * (long)TIME_CONST;
-	if (bytes_out == 0) {
+	if (bytes_out == 0)
 		bytes_out++;
-		time_left = 0;
-	}
+
 	while (bytes_out--) {
 		outb(PULSE, io + UART_TX);
 		/* FIXME treba seriozne cakanie z char/serial.c */
 		while (!(inb(io + UART_LSR) & UART_LSR_THRE))
 			;
 	}
-#if 0
-	if (time_left > 0)
-		safe_udelay(time_left);
-#endif
 }
 #endif
 
diff --git a/drivers/staging/lirc/lirc_zilog.c b/drivers/staging/lirc/lirc_zilog.c
index dd6a57c3c3a..4e051f6b52d 100644
--- a/drivers/staging/lirc/lirc_zilog.c
+++ b/drivers/staging/lirc/lirc_zilog.c
@@ -475,14 +475,14 @@ static int lirc_thread(void *arg)
 	dprintk("poll thread started\n");
 
 	while (!kthread_should_stop()) {
+		set_current_state(TASK_INTERRUPTIBLE);
+
 		/* if device not opened, we can sleep half a second */
 		if (atomic_read(&ir->open_count) == 0) {
 			schedule_timeout(HZ/2);
 			continue;
 		}
 
-		set_current_state(TASK_INTERRUPTIBLE);
-
 		/*
 		 * This is ~113*2 + 24 + jitter (2*repeat gap + code length).
 		 * We use this interval as the chip resets every time you poll
diff --git a/include/media/lirc_dev.h b/include/media/lirc_dev.h
index 630e702c951..168dd0b1bae 100644
--- a/include/media/lirc_dev.h
+++ b/include/media/lirc_dev.h
@@ -9,7 +9,7 @@
 #ifndef _LINUX_LIRC_DEV_H
 #define _LINUX_LIRC_DEV_H
 
-#define MAX_IRCTL_DEVICES 4
+#define MAX_IRCTL_DEVICES 8
 #define BUFLEN            16
 
 #define mod(n, div) ((n) % (div))
diff --git a/include/media/m5mols.h b/include/media/m5mols.h
index 2d7e7ca2313..aac2c0e06d5 100644
--- a/include/media/m5mols.h
+++ b/include/media/m5mols.h
@@ -2,10 +2,10 @@
  * Driver header for M-5MOLS 8M Pixel camera sensor with ISP
  *
  * Copyright (C) 2011 Samsung Electronics Co., Ltd.
- * Author: HeungJun Kim, riverful.kim@samsung.com
+ * Author: HeungJun Kim <riverful.kim@samsung.com>
  *
  * Copyright (C) 2009 Samsung Electronics Co., Ltd.
- * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com
+ * Author: Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by