ath9k: Add new file init.c

Move initialization/de-initialization related
code to this file.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

4 files changed, 865 insertions, 839 deletions

diff --git a/drivers/net/wireless/ath/ath9k/Makefile b/drivers/net/wireless/ath/ath9k/Makefile
index 332d6f20c6b..6b50d5eb9ec 100644
--- a/drivers/net/wireless/ath/ath9k/Makefile
+++ b/drivers/net/wireless/ath/ath9k/Makefile
@@ -1,5 +1,6 @@
 ath9k-y +=	beacon.o \
 		gpio.o \
+		init.o \
 		main.o \
 		recv.o \
 		xmit.o \
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index bbdca5edcfb..68a423054e6 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -341,6 +341,8 @@ int ath_beaconq_config(struct ath_softc *sc);
 #define ATH_LONG_CALINTERVAL      30000   /* 30 seconds */
 #define ATH_RESTART_CALINTERVAL   1200000 /* 20 minutes */
 
+void ath_ani_calibrate(unsigned long data);
+
 /**********/
 /* BTCOEX */
 /**********/
@@ -519,6 +521,7 @@ struct ath_wiphy {
 	int chan_is_ht;
 };
 
+void ath9k_tasklet(unsigned long data);
 int ath_reset(struct ath_softc *sc, bool retry_tx);
 int ath_get_hal_qnum(u16 queue, struct ath_softc *sc);
 int ath_get_mac80211_qnum(u32 queue, struct ath_softc *sc);
@@ -535,6 +538,7 @@ static inline void ath_bus_cleanup(struct ath_common *common)
 }
 
 extern struct ieee80211_ops ath9k_ops;
+extern int modparam_nohwcrypt;
 
 irqreturn_t ath_isr(int irq, void *dev);
 void ath_cleanup(struct ath_softc *sc);
@@ -552,6 +556,7 @@ int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
 
 void ath_radio_enable(struct ath_softc *sc, struct ieee80211_hw *hw);
 void ath_radio_disable(struct ath_softc *sc, struct ieee80211_hw *hw);
+bool ath9k_setpower(struct ath_softc *sc, enum ath9k_power_mode mode);
 
 #ifdef CONFIG_PCI
 int ath_pci_init(void);
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
new file mode 100644
index 00000000000..2bea0892918
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -0,0 +1,856 @@
+/*
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "ath9k.h"
+
+static char *dev_info = "ath9k";
+
+MODULE_AUTHOR("Atheros Communications");
+MODULE_DESCRIPTION("Support for Atheros 802.11n wireless LAN cards.");
+MODULE_SUPPORTED_DEVICE("Atheros 802.11n WLAN cards");
+MODULE_LICENSE("Dual BSD/GPL");
+
+static unsigned int ath9k_debug = ATH_DBG_DEFAULT;
+module_param_named(debug, ath9k_debug, uint, 0);
+MODULE_PARM_DESC(debug, "Debugging mask");
+
+int modparam_nohwcrypt;
+module_param_named(nohwcrypt, modparam_nohwcrypt, int, 0444);
+MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption");
+
+/* We use the hw_value as an index into our private channel structure */
+
+#define CHAN2G(_freq, _idx)  { \
+	.center_freq = (_freq), \
+	.hw_value = (_idx), \
+	.max_power = 20, \
+}
+
+#define CHAN5G(_freq, _idx) { \
+	.band = IEEE80211_BAND_5GHZ, \
+	.center_freq = (_freq), \
+	.hw_value = (_idx), \
+	.max_power = 20, \
+}
+
+/* Some 2 GHz radios are actually tunable on 2312-2732
+ * on 5 MHz steps, we support the channels which we know
+ * we have calibration data for all cards though to make
+ * this static */
+static struct ieee80211_channel ath9k_2ghz_chantable[] = {
+	CHAN2G(2412, 0), /* Channel 1 */
+	CHAN2G(2417, 1), /* Channel 2 */
+	CHAN2G(2422, 2), /* Channel 3 */
+	CHAN2G(2427, 3), /* Channel 4 */
+	CHAN2G(2432, 4), /* Channel 5 */
+	CHAN2G(2437, 5), /* Channel 6 */
+	CHAN2G(2442, 6), /* Channel 7 */
+	CHAN2G(2447, 7), /* Channel 8 */
+	CHAN2G(2452, 8), /* Channel 9 */
+	CHAN2G(2457, 9), /* Channel 10 */
+	CHAN2G(2462, 10), /* Channel 11 */
+	CHAN2G(2467, 11), /* Channel 12 */
+	CHAN2G(2472, 12), /* Channel 13 */
+	CHAN2G(2484, 13), /* Channel 14 */
+};
+
+/* Some 5 GHz radios are actually tunable on XXXX-YYYY
+ * on 5 MHz steps, we support the channels which we know
+ * we have calibration data for all cards though to make
+ * this static */
+static struct ieee80211_channel ath9k_5ghz_chantable[] = {
+	/* _We_ call this UNII 1 */
+	CHAN5G(5180, 14), /* Channel 36 */
+	CHAN5G(5200, 15), /* Channel 40 */
+	CHAN5G(5220, 16), /* Channel 44 */
+	CHAN5G(5240, 17), /* Channel 48 */
+	/* _We_ call this UNII 2 */
+	CHAN5G(5260, 18), /* Channel 52 */
+	CHAN5G(5280, 19), /* Channel 56 */
+	CHAN5G(5300, 20), /* Channel 60 */
+	CHAN5G(5320, 21), /* Channel 64 */
+	/* _We_ call this "Middle band" */
+	CHAN5G(5500, 22), /* Channel 100 */
+	CHAN5G(5520, 23), /* Channel 104 */
+	CHAN5G(5540, 24), /* Channel 108 */
+	CHAN5G(5560, 25), /* Channel 112 */
+	CHAN5G(5580, 26), /* Channel 116 */
+	CHAN5G(5600, 27), /* Channel 120 */
+	CHAN5G(5620, 28), /* Channel 124 */
+	CHAN5G(5640, 29), /* Channel 128 */
+	CHAN5G(5660, 30), /* Channel 132 */
+	CHAN5G(5680, 31), /* Channel 136 */
+	CHAN5G(5700, 32), /* Channel 140 */
+	/* _We_ call this UNII 3 */
+	CHAN5G(5745, 33), /* Channel 149 */
+	CHAN5G(5765, 34), /* Channel 153 */
+	CHAN5G(5785, 35), /* Channel 157 */
+	CHAN5G(5805, 36), /* Channel 161 */
+	CHAN5G(5825, 37), /* Channel 165 */
+};
+
+/* Atheros hardware rate code addition for short premble */
+#define SHPCHECK(__hw_rate, __flags) \
+	((__flags & IEEE80211_RATE_SHORT_PREAMBLE) ? (__hw_rate | 0x04 ) : 0)
+
+#define RATE(_bitrate, _hw_rate, _flags) {              \
+	.bitrate        = (_bitrate),                   \
+	.flags          = (_flags),                     \
+	.hw_value       = (_hw_rate),                   \
+	.hw_value_short = (SHPCHECK(_hw_rate, _flags))  \
+}
+
+static struct ieee80211_rate ath9k_legacy_rates[] = {
+	RATE(10, 0x1b, 0),
+	RATE(20, 0x1a, IEEE80211_RATE_SHORT_PREAMBLE),
+	RATE(55, 0x19, IEEE80211_RATE_SHORT_PREAMBLE),
+	RATE(110, 0x18, IEEE80211_RATE_SHORT_PREAMBLE),
+	RATE(60, 0x0b, 0),
+	RATE(90, 0x0f, 0),
+	RATE(120, 0x0a, 0),
+	RATE(180, 0x0e, 0),
+	RATE(240, 0x09, 0),
+	RATE(360, 0x0d, 0),
+	RATE(480, 0x08, 0),
+	RATE(540, 0x0c, 0),
+};
+
+static void ath9k_uninit_hw(struct ath_softc *sc);
+
+/*
+ * Read and write, they both share the same lock. We do this to serialize
+ * reads and writes on Atheros 802.11n PCI devices only. This is required
+ * as the FIFO on these devices can only accept sanely 2 requests.
+ */
+
+static void ath9k_iowrite32(void *hw_priv, u32 val, u32 reg_offset)
+{
+	struct ath_hw *ah = (struct ath_hw *) hw_priv;
+	struct ath_common *common = ath9k_hw_common(ah);
+	struct ath_softc *sc = (struct ath_softc *) common->priv;
+
+	if (ah->config.serialize_regmode == SER_REG_MODE_ON) {
+		unsigned long flags;
+		spin_lock_irqsave(&sc->sc_serial_rw, flags);
+		iowrite32(val, sc->mem + reg_offset);
+		spin_unlock_irqrestore(&sc->sc_serial_rw, flags);
+	} else
+		iowrite32(val, sc->mem + reg_offset);
+}
+
+static unsigned int ath9k_ioread32(void *hw_priv, u32 reg_offset)
+{
+	struct ath_hw *ah = (struct ath_hw *) hw_priv;
+	struct ath_common *common = ath9k_hw_common(ah);
+	struct ath_softc *sc = (struct ath_softc *) common->priv;
+	u32 val;
+
+	if (ah->config.serialize_regmode == SER_REG_MODE_ON) {
+		unsigned long flags;
+		spin_lock_irqsave(&sc->sc_serial_rw, flags);
+		val = ioread32(sc->mem + reg_offset);
+		spin_unlock_irqrestore(&sc->sc_serial_rw, flags);
+	} else
+		val = ioread32(sc->mem + reg_offset);
+	return val;
+}
+
+static const struct ath_ops ath9k_common_ops = {
+	.read = ath9k_ioread32,
+	.write = ath9k_iowrite32,
+};
+
+/**************************/
+/*     Initialization     */
+/**************************/
+
+static void setup_ht_cap(struct ath_softc *sc,
+			 struct ieee80211_sta_ht_cap *ht_info)
+{
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+	u8 tx_streams, rx_streams;
+
+	ht_info->ht_supported = true;
+	ht_info->cap = IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
+		       IEEE80211_HT_CAP_SM_PS |
+		       IEEE80211_HT_CAP_SGI_40 |
+		       IEEE80211_HT_CAP_DSSSCCK40;
+
+	ht_info->ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K;
+	ht_info->ampdu_density = IEEE80211_HT_MPDU_DENSITY_8;
+
+	/* set up supported mcs set */
+	memset(&ht_info->mcs, 0, sizeof(ht_info->mcs));
+	tx_streams = !(common->tx_chainmask & (common->tx_chainmask - 1)) ?
+		     1 : 2;
+	rx_streams = !(common->rx_chainmask & (common->rx_chainmask - 1)) ?
+		     1 : 2;
+
+	if (tx_streams != rx_streams) {
+		ath_print(common, ATH_DBG_CONFIG,
+			  "TX streams %d, RX streams: %d\n",
+			  tx_streams, rx_streams);
+		ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_RX_DIFF;
+		ht_info->mcs.tx_params |= ((tx_streams - 1) <<
+				IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT);
+	}
+
+	ht_info->mcs.rx_mask[0] = 0xff;
+	if (rx_streams >= 2)
+		ht_info->mcs.rx_mask[1] = 0xff;
+
+	ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_DEFINED;
+}
+
+static int ath9k_reg_notifier(struct wiphy *wiphy,
+			      struct regulatory_request *request)
+{
+	struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
+	struct ath_wiphy *aphy = hw->priv;
+	struct ath_softc *sc = aphy->sc;
+	struct ath_regulatory *reg = ath9k_hw_regulatory(sc->sc_ah);
+
+	return ath_reg_notifier_apply(wiphy, request, reg);
+}
+
+/*
+ *  This function will allocate both the DMA descriptor structure, and the
+ *  buffers it contains.  These are used to contain the descriptors used
+ *  by the system.
+*/
+int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd,
+		      struct list_head *head, const char *name,
+		      int nbuf, int ndesc)
+{
+#define	DS2PHYS(_dd, _ds)						\
+	((_dd)->dd_desc_paddr + ((caddr_t)(_ds) - (caddr_t)(_dd)->dd_desc))
+#define ATH_DESC_4KB_BOUND_CHECK(_daddr) ((((_daddr) & 0xFFF) > 0xF7F) ? 1 : 0)
+#define ATH_DESC_4KB_BOUND_NUM_SKIPPED(_len) ((_len) / 4096)
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+	struct ath_desc *ds;
+	struct ath_buf *bf;
+	int i, bsize, error;
+
+	ath_print(common, ATH_DBG_CONFIG, "%s DMA: %u buffers %u desc/buf\n",
+		  name, nbuf, ndesc);
+
+	INIT_LIST_HEAD(head);
+	/* ath_desc must be a multiple of DWORDs */
+	if ((sizeof(struct ath_desc) % 4) != 0) {
+		ath_print(common, ATH_DBG_FATAL,
+			  "ath_desc not DWORD aligned\n");
+		BUG_ON((sizeof(struct ath_desc) % 4) != 0);
+		error = -ENOMEM;
+		goto fail;
+	}
+
+	dd->dd_desc_len = sizeof(struct ath_desc) * nbuf * ndesc;
+
+	/*
+	 * Need additional DMA memory because we can't use
+	 * descriptors that cross the 4K page boundary. Assume
+	 * one skipped descriptor per 4K page.
+	 */
+	if (!(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_4KB_SPLITTRANS)) {
+		u32 ndesc_skipped =
+			ATH_DESC_4KB_BOUND_NUM_SKIPPED(dd->dd_desc_len);
+		u32 dma_len;
+
+		while (ndesc_skipped) {
+			dma_len = ndesc_skipped * sizeof(struct ath_desc);
+			dd->dd_desc_len += dma_len;
+
+			ndesc_skipped = ATH_DESC_4KB_BOUND_NUM_SKIPPED(dma_len);
+		};
+	}
+
+	/* allocate descriptors */
+	dd->dd_desc = dma_alloc_coherent(sc->dev, dd->dd_desc_len,
+					 &dd->dd_desc_paddr, GFP_KERNEL);
+	if (dd->dd_desc == NULL) {
+		error = -ENOMEM;
+		goto fail;
+	}
+	ds = dd->dd_desc;
+	ath_print(common, ATH_DBG_CONFIG, "%s DMA map: %p (%u) -> %llx (%u)\n",
+		  name, ds, (u32) dd->dd_desc_len,
+		  ito64(dd->dd_desc_paddr), /*XXX*/(u32) dd->dd_desc_len);
+
+	/* allocate buffers */
+	bsize = sizeof(struct ath_buf) * nbuf;
+	bf = kzalloc(bsize, GFP_KERNEL);
+	if (bf == NULL) {
+		error = -ENOMEM;
+		goto fail2;
+	}
+	dd->dd_bufptr = bf;
+
+	for (i = 0; i < nbuf; i++, bf++, ds += ndesc) {
+		bf->bf_desc = ds;
+		bf->bf_daddr = DS2PHYS(dd, ds);
+
+		if (!(sc->sc_ah->caps.hw_caps &
+		      ATH9K_HW_CAP_4KB_SPLITTRANS)) {
+			/*
+			 * Skip descriptor addresses which can cause 4KB
+			 * boundary crossing (addr + length) with a 32 dword
+			 * descriptor fetch.
+			 */
+			while (ATH_DESC_4KB_BOUND_CHECK(bf->bf_daddr)) {
+				BUG_ON((caddr_t) bf->bf_desc >=
+				       ((caddr_t) dd->dd_desc +
+					dd->dd_desc_len));
+
+				ds += ndesc;
+				bf->bf_desc = ds;
+				bf->bf_daddr = DS2PHYS(dd, ds);
+			}
+		}
+		list_add_tail(&bf->list, head);
+	}
+	return 0;
+fail2:
+	dma_free_coherent(sc->dev, dd->dd_desc_len, dd->dd_desc,
+			  dd->dd_desc_paddr);
+fail:
+	memset(dd, 0, sizeof(*dd));
+	return error;
+#undef ATH_DESC_4KB_BOUND_CHECK
+#undef ATH_DESC_4KB_BOUND_NUM_SKIPPED
+#undef DS2PHYS
+}
+
+static int ath_init_softc(u16 devid, struct ath_softc *sc, u16 subsysid,
+			  const struct ath_bus_ops *bus_ops)
+{
+	struct ath_hw *ah = NULL;
+	struct ath_common *common;
+	int r = 0, i;
+	int csz = 0;
+	int qnum;
+
+	/* XXX: hardware will not be ready until ath_open() being called */
+	sc->sc_flags |= SC_OP_INVALID;
+
+	spin_lock_init(&sc->wiphy_lock);
+	spin_lock_init(&sc->sc_resetlock);
+	spin_lock_init(&sc->sc_serial_rw);
+	spin_lock_init(&sc->sc_pm_lock);
+	mutex_init(&sc->mutex);
+	tasklet_init(&sc->intr_tq, ath9k_tasklet, (unsigned long)sc);
+	tasklet_init(&sc->bcon_tasklet, ath_beacon_tasklet,
+		     (unsigned long)sc);
+
+	ah = kzalloc(sizeof(struct ath_hw), GFP_KERNEL);
+	if (!ah)
+		return -ENOMEM;
+
+	ah->hw_version.devid = devid;
+	ah->hw_version.subsysid = subsysid;
+	sc->sc_ah = ah;
+
+	common = ath9k_hw_common(ah);
+	common->ops = &ath9k_common_ops;
+	common->bus_ops = bus_ops;
+	common->ah = ah;
+	common->hw = sc->hw;
+	common->priv = sc;
+	common->debug_mask = ath9k_debug;
+
+	/*
+	 * Cache line size is used to size and align various
+	 * structures used to communicate with the hardware.
+	 */
+	ath_read_cachesize(common, &csz);
+	/* XXX assert csz is non-zero */
+	common->cachelsz = csz << 2;	/* convert to bytes */
+
+	r = ath9k_hw_init(ah);
+	if (r) {
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unable to initialize hardware; "
+			  "initialization status: %d\n", r);
+		goto bad_free_hw;
+	}
+
+	if (ath9k_init_debug(ah) < 0) {
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unable to create debugfs files\n");
+		goto bad_free_hw;
+	}
+
+	/* Get the hardware key cache size. */
+	common->keymax = ah->caps.keycache_size;
+	if (common->keymax > ATH_KEYMAX) {
+		ath_print(common, ATH_DBG_ANY,
+			  "Warning, using only %u entries in %u key cache\n",
+			  ATH_KEYMAX, common->keymax);
+		common->keymax = ATH_KEYMAX;
+	}
+
+	/*
+	 * Reset the key cache since some parts do not
+	 * reset the contents on initial power up.
+	 */
+	for (i = 0; i < common->keymax; i++)
+		ath9k_hw_keyreset(ah, (u16) i);
+
+	/* default to MONITOR mode */
+	sc->sc_ah->opmode = NL80211_IFTYPE_MONITOR;
+
+	/*
+	 * Allocate hardware transmit queues: one queue for
+	 * beacon frames and one data queue for each QoS
+	 * priority.  Note that the hal handles reseting
+	 * these queues at the needed time.
+	 */
+	sc->beacon.beaconq = ath9k_hw_beaconq_setup(ah);
+	if (sc->beacon.beaconq == -1) {
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unable to setup a beacon xmit queue\n");
+		r = -EIO;
+		goto bad2;
+	}
+	sc->beacon.cabq = ath_txq_setup(sc, ATH9K_TX_QUEUE_CAB, 0);
+	if (sc->beacon.cabq == NULL) {
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unable to setup CAB xmit queue\n");
+		r = -EIO;
+		goto bad2;
+	}
+
+	sc->config.cabqReadytime = ATH_CABQ_READY_TIME;
+	ath_cabq_update(sc);
+
+	for (i = 0; i < ARRAY_SIZE(sc->tx.hwq_map); i++)
+		sc->tx.hwq_map[i] = -1;
+
+	/* Setup data queues */
+	/* NB: ensure BK queue is the lowest priority h/w queue */
+	if (!ath_tx_setup(sc, ATH9K_WME_AC_BK)) {
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unable to setup xmit queue for BK traffic\n");
+		r = -EIO;
+		goto bad2;
+	}
+
+	if (!ath_tx_setup(sc, ATH9K_WME_AC_BE)) {
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unable to setup xmit queue for BE traffic\n");
+		r = -EIO;
+		goto bad2;
+	}
+	if (!ath_tx_setup(sc, ATH9K_WME_AC_VI)) {
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unable to setup xmit queue for VI traffic\n");
+		r = -EIO;
+		goto bad2;
+	}
+	if (!ath_tx_setup(sc, ATH9K_WME_AC_VO)) {
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unable to setup xmit queue for VO traffic\n");
+		r = -EIO;
+		goto bad2;
+	}
+
+	/* Initializes the noise floor to a reasonable default value.
+	 * Later on this will be updated during ANI processing. */
+
+	common->ani.noise_floor = ATH_DEFAULT_NOISE_FLOOR;
+	setup_timer(&common->ani.timer, ath_ani_calibrate, (unsigned long)sc);
+
+	if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
+				   ATH9K_CIPHER_TKIP, NULL)) {
+		/*
+		 * Whether we should enable h/w TKIP MIC.
+		 * XXX: if we don't support WME TKIP MIC, then we wouldn't
+		 * report WMM capable, so it's always safe to turn on
+		 * TKIP MIC in this case.
+		 */
+		ath9k_hw_setcapability(sc->sc_ah, ATH9K_CAP_TKIP_MIC,
+				       0, 1, NULL);
+	}
+
+	/*
+	 * Check whether the separate key cache entries
+	 * are required to handle both tx+rx MIC keys.
+	 * With split mic keys the number of stations is limited
+	 * to 27 otherwise 59.
+	 */
+	if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
+				   ATH9K_CIPHER_TKIP, NULL)
+	    && ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
+				      ATH9K_CIPHER_MIC, NULL)
+	    && ath9k_hw_getcapability(ah, ATH9K_CAP_TKIP_SPLIT,
+				      0, NULL))
+		common->splitmic = 1;
+
+	/* turn on mcast key search if possible */
+	if (!ath9k_hw_getcapability(ah, ATH9K_CAP_MCAST_KEYSRCH, 0, NULL))
+		(void)ath9k_hw_setcapability(ah, ATH9K_CAP_MCAST_KEYSRCH, 1,
+					     1, NULL);
+
+	sc->config.txpowlimit = ATH_TXPOWER_MAX;
+
+	/* 11n Capabilities */
+	if (ah->caps.hw_caps & ATH9K_HW_CAP_HT) {
+		sc->sc_flags |= SC_OP_TXAGGR;
+		sc->sc_flags |= SC_OP_RXAGGR;
+	}
+
+	common->tx_chainmask = ah->caps.tx_chainmask;
+	common->rx_chainmask = ah->caps.rx_chainmask;
+
+	ath9k_hw_setcapability(ah, ATH9K_CAP_DIVERSITY, 1, true, NULL);
+	sc->rx.defant = ath9k_hw_getdefantenna(ah);
+
+	if (ah->caps.hw_caps & ATH9K_HW_CAP_BSSIDMASK)
+		memcpy(common->bssidmask, ath_bcast_mac, ETH_ALEN);
+
+	sc->beacon.slottime = ATH9K_SLOT_TIME_9;	/* default to short slot time */
+
+	/* initialize beacon slots */
+	for (i = 0; i < ARRAY_SIZE(sc->beacon.bslot); i++) {
+		sc->beacon.bslot[i] = NULL;
+		sc->beacon.bslot_aphy[i] = NULL;
+	}
+
+	/* setup channels and rates */
+
+	if (test_bit(ATH9K_MODE_11G, sc->sc_ah->caps.wireless_modes)) {
+		sc->sbands[IEEE80211_BAND_2GHZ].channels = ath9k_2ghz_chantable;
+		sc->sbands[IEEE80211_BAND_2GHZ].band = IEEE80211_BAND_2GHZ;
+		sc->sbands[IEEE80211_BAND_2GHZ].n_channels =
+			ARRAY_SIZE(ath9k_2ghz_chantable);
+		sc->sbands[IEEE80211_BAND_2GHZ].bitrates = ath9k_legacy_rates;
+		sc->sbands[IEEE80211_BAND_2GHZ].n_bitrates =
+			ARRAY_SIZE(ath9k_legacy_rates);
+	}
+
+	if (test_bit(ATH9K_MODE_11A, sc->sc_ah->caps.wireless_modes)) {
+		sc->sbands[IEEE80211_BAND_5GHZ].channels = ath9k_5ghz_chantable;
+		sc->sbands[IEEE80211_BAND_5GHZ].band = IEEE80211_BAND_5GHZ;
+		sc->sbands[IEEE80211_BAND_5GHZ].n_channels =
+			ARRAY_SIZE(ath9k_5ghz_chantable);
+		sc->sbands[IEEE80211_BAND_5GHZ].bitrates =
+			ath9k_legacy_rates + 4;
+		sc->sbands[IEEE80211_BAND_5GHZ].n_bitrates =
+			ARRAY_SIZE(ath9k_legacy_rates) - 4;
+	}
+
+	switch (ah->btcoex_hw.scheme) {
+	case ATH_BTCOEX_CFG_NONE:
+		break;
+	case ATH_BTCOEX_CFG_2WIRE:
+		ath9k_hw_btcoex_init_2wire(ah);
+		break;
+	case ATH_BTCOEX_CFG_3WIRE:
+		ath9k_hw_btcoex_init_3wire(ah);
+		r = ath_init_btcoex_timer(sc);
+		if (r)
+			goto bad2;
+		qnum = ath_tx_get_qnum(sc, ATH9K_TX_QUEUE_DATA, ATH9K_WME_AC_BE);
+		ath9k_hw_init_btcoex_hw(ah, qnum);
+		sc->btcoex.bt_stomp_type = ATH_BTCOEX_STOMP_LOW;
+		break;
+	default:
+		WARN_ON(1);
+		break;
+	}
+
+	return 0;
+bad2:
+	/* cleanup tx queues */
+	for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
+		if (ATH_TXQ_SETUP(sc, i))
+			ath_tx_cleanupq(sc, &sc->tx.txq[i]);
+
+bad_free_hw:
+	ath9k_uninit_hw(sc);
+	return r;
+}
+
+void ath_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
+{
+	hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
+		IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
+		IEEE80211_HW_SIGNAL_DBM |
+		IEEE80211_HW_AMPDU_AGGREGATION |
+		IEEE80211_HW_SUPPORTS_PS |
+		IEEE80211_HW_PS_NULLFUNC_STACK |
+		IEEE80211_HW_SPECTRUM_MGMT;
+
+	if (AR_SREV_9160_10_OR_LATER(sc->sc_ah) || modparam_nohwcrypt)
+		hw->flags |= IEEE80211_HW_MFP_CAPABLE;
+
+	hw->wiphy->interface_modes =
+		BIT(NL80211_IFTYPE_AP) |
+		BIT(NL80211_IFTYPE_STATION) |
+		BIT(NL80211_IFTYPE_ADHOC) |
+		BIT(NL80211_IFTYPE_MESH_POINT);
+
+	hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
+
+	hw->queues = 4;
+	hw->max_rates = 4;
+	hw->channel_change_time = 5000;
+	hw->max_listen_interval = 10;
+	/* Hardware supports 10 but we use 4 */
+	hw->max_rate_tries = 4;
+	hw->sta_data_size = sizeof(struct ath_node);
+	hw->vif_data_size = sizeof(struct ath_vif);
+
+	hw->rate_control_algorithm = "ath9k_rate_control";
+
+	if (test_bit(ATH9K_MODE_11G, sc->sc_ah->caps.wireless_modes))
+		hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
+			&sc->sbands[IEEE80211_BAND_2GHZ];
+	if (test_bit(ATH9K_MODE_11A, sc->sc_ah->caps.wireless_modes))
+		hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
+			&sc->sbands[IEEE80211_BAND_5GHZ];
+}
+
+/* Device driver core initialization */
+int ath_init_device(u16 devid, struct ath_softc *sc, u16 subsysid,
+		    const struct ath_bus_ops *bus_ops)
+{
+	struct ieee80211_hw *hw = sc->hw;
+	struct ath_common *common;
+	struct ath_hw *ah;
+	int error = 0, i;
+	struct ath_regulatory *reg;
+
+	dev_dbg(sc->dev, "Attach ATH hw\n");
+
+	error = ath_init_softc(devid, sc, subsysid, bus_ops);
+	if (error != 0)
+		return error;
+
+	ah = sc->sc_ah;
+	common = ath9k_hw_common(ah);
+
+	/* get mac address from hardware and set in mac80211 */
+
+	SET_IEEE80211_PERM_ADDR(hw, common->macaddr);
+
+	ath_set_hw_capab(sc, hw);
+
+	error = ath_regd_init(&common->regulatory, sc->hw->wiphy,
+			      ath9k_reg_notifier);
+	if (error)
+		return error;
+
+	reg = &common->regulatory;
+
+	if (ah->caps.hw_caps & ATH9K_HW_CAP_HT) {
+		if (test_bit(ATH9K_MODE_11G, ah->caps.wireless_modes))
+			setup_ht_cap(sc,
+				     &sc->sbands[IEEE80211_BAND_2GHZ].ht_cap);
+		if (test_bit(ATH9K_MODE_11A, ah->caps.wireless_modes))
+			setup_ht_cap(sc,
+				     &sc->sbands[IEEE80211_BAND_5GHZ].ht_cap);
+	}
+
+	/* initialize tx/rx engine */
+	error = ath_tx_init(sc, ATH_TXBUF);
+	if (error != 0)
+		goto error_attach;
+
+	error = ath_rx_init(sc, ATH_RXBUF);
+	if (error != 0)
+		goto error_attach;
+
+	INIT_WORK(&sc->chan_work, ath9k_wiphy_chan_work);
+	INIT_DELAYED_WORK(&sc->wiphy_work, ath9k_wiphy_work);
+	sc->wiphy_scheduler_int = msecs_to_jiffies(500);
+
+	error = ieee80211_register_hw(hw);
+
+	if (!ath_is_world_regd(reg)) {
+		error = regulatory_hint(hw->wiphy, reg->alpha2);
+		if (error)
+			goto error_attach;
+	}
+
+	/* Initialize LED control */
+	ath_init_leds(sc);
+
+	ath_start_rfkill_poll(sc);
+
+	return 0;
+
+error_attach:
+	/* cleanup tx queues */
+	for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
+		if (ATH_TXQ_SETUP(sc, i))
+			ath_tx_cleanupq(sc, &sc->tx.txq[i]);
+
+	ath9k_uninit_hw(sc);
+
+	return error;
+}
+
+/*****************************/
+/*     De-Initialization     */
+/*****************************/
+
+static void ath9k_uninit_hw(struct ath_softc *sc)
+{
+	struct ath_hw *ah = sc->sc_ah;
+
+	BUG_ON(!ah);
+
+	ath9k_exit_debug(ah);
+	ath9k_hw_detach(ah);
+	sc->sc_ah = NULL;
+}
+
+static void ath_clean_core(struct ath_softc *sc)
+{
+	struct ieee80211_hw *hw = sc->hw;
+	struct ath_hw *ah = sc->sc_ah;
+	int i = 0;
+
+	ath9k_ps_wakeup(sc);
+
+	dev_dbg(sc->dev, "Detach ATH hw\n");
+
+	ath_deinit_leds(sc);
+	wiphy_rfkill_stop_polling(sc->hw->wiphy);
+
+	for (i = 0; i < sc->num_sec_wiphy; i++) {
+		struct ath_wiphy *aphy = sc->sec_wiphy[i];
+		if (aphy == NULL)
+			continue;
+		sc->sec_wiphy[i] = NULL;
+		ieee80211_unregister_hw(aphy->hw);
+		ieee80211_free_hw(aphy->hw);
+	}
+	ieee80211_unregister_hw(hw);
+	ath_rx_cleanup(sc);
+	ath_tx_cleanup(sc);
+
+	tasklet_kill(&sc->intr_tq);
+	tasklet_kill(&sc->bcon_tasklet);
+
+	if (!(sc->sc_flags & SC_OP_INVALID))
+		ath9k_setpower(sc, ATH9K_PM_AWAKE);
+
+	/* cleanup tx queues */
+	for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
+		if (ATH_TXQ_SETUP(sc, i))
+			ath_tx_cleanupq(sc, &sc->tx.txq[i]);
+
+	if ((sc->btcoex.no_stomp_timer) &&
+	    ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE)
+		ath_gen_timer_free(ah, sc->btcoex.no_stomp_timer);
+}
+
+void ath_descdma_cleanup(struct ath_softc *sc,
+			 struct ath_descdma *dd,
+			 struct list_head *head)
+{
+	dma_free_coherent(sc->dev, dd->dd_desc_len, dd->dd_desc,
+			  dd->dd_desc_paddr);
+
+	INIT_LIST_HEAD(head);
+	kfree(dd->dd_bufptr);
+	memset(dd, 0, sizeof(*dd));
+}
+
+void ath_detach(struct ath_softc *sc)
+{
+	ath_clean_core(sc);
+	ath9k_uninit_hw(sc);
+}
+
+void ath_cleanup(struct ath_softc *sc)
+{
+	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
+
+	ath_clean_core(sc);
+	free_irq(sc->irq, sc);
+	ath_bus_cleanup(common);
+	kfree(sc->sec_wiphy);
+	ieee80211_free_hw(sc->hw);
+
+	ath9k_uninit_hw(sc);
+}
+
+/************************/
+/*     Module Hooks     */
+/************************/
+
+static int __init ath9k_init(void)
+{
+	int error;
+
+	/* Register rate control algorithm */
+	error = ath_rate_control_register();
+	if (error != 0) {
+		printk(KERN_ERR
+			"ath9k: Unable to register rate control "
+			"algorithm: %d\n",
+			error);
+		goto err_out;
+	}
+
+	error = ath9k_debug_create_root();
+	if (error) {
+		printk(KERN_ERR
+			"ath9k: Unable to create debugfs root: %d\n",
+			error);
+		goto err_rate_unregister;
+	}
+
+	error = ath_pci_init();
+	if (error < 0) {
+		printk(KERN_ERR
+			"ath9k: No PCI devices found, driver not installed.\n");
+		error = -ENODEV;
+		goto err_remove_root;
+	}
+
+	error = ath_ahb_init();
+	if (error < 0) {
+		error = -ENODEV;
+		goto err_pci_exit;
+	}
+
+	return 0;
+
+ err_pci_exit:
+	ath_pci_exit();
+
+ err_remove_root:
+	ath9k_debug_remove_root();
+ err_rate_unregister:
+	ath_rate_control_unregister();
+ err_out:
+	return error;
+}
+module_init(ath9k_init);
+
+static void __exit ath9k_exit(void)
+{
+	ath_ahb_exit();
+	ath_pci_exit();
+	ath9k_debug_remove_root();
+	ath_rate_control_unregister();
+	printk(KERN_INFO "%s: Driver unloaded\n", dev_info);
+}
+module_exit(ath9k_exit);
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 31a33cf762d..48bd5d50f4d 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -18,118 +18,6 @@
 #include "ath9k.h"
 #include "btcoex.h"
 
-static char *dev_info = "ath9k";
-
-MODULE_AUTHOR("Atheros Communications");
-MODULE_DESCRIPTION("Support for Atheros 802.11n wireless LAN cards.");
-MODULE_SUPPORTED_DEVICE("Atheros 802.11n WLAN cards");
-MODULE_LICENSE("Dual BSD/GPL");
-
-static int modparam_nohwcrypt;
-module_param_named(nohwcrypt, modparam_nohwcrypt, int, 0444);
-MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption");
-
-static unsigned int ath9k_debug = ATH_DBG_DEFAULT;
-module_param_named(debug, ath9k_debug, uint, 0);
-MODULE_PARM_DESC(debug, "Debugging mask");
-
-/* We use the hw_value as an index into our private channel structure */
-
-#define CHAN2G(_freq, _idx)  { \
-	.center_freq = (_freq), \
-	.hw_value = (_idx), \
-	.max_power = 20, \
-}
-
-#define CHAN5G(_freq, _idx) { \
-	.band = IEEE80211_BAND_5GHZ, \
-	.center_freq = (_freq), \
-	.hw_value = (_idx), \
-	.max_power = 20, \
-}
-
-/* Some 2 GHz radios are actually tunable on 2312-2732
- * on 5 MHz steps, we support the channels which we know
- * we have calibration data for all cards though to make
- * this static */
-static struct ieee80211_channel ath9k_2ghz_chantable[] = {
-	CHAN2G(2412, 0), /* Channel 1 */
-	CHAN2G(2417, 1), /* Channel 2 */
-	CHAN2G(2422, 2), /* Channel 3 */
-	CHAN2G(2427, 3), /* Channel 4 */
-	CHAN2G(2432, 4), /* Channel 5 */
-	CHAN2G(2437, 5), /* Channel 6 */
-	CHAN2G(2442, 6), /* Channel 7 */
-	CHAN2G(2447, 7), /* Channel 8 */
-	CHAN2G(2452, 8), /* Channel 9 */
-	CHAN2G(2457, 9), /* Channel 10 */
-	CHAN2G(2462, 10), /* Channel 11 */
-	CHAN2G(2467, 11), /* Channel 12 */
-	CHAN2G(2472, 12), /* Channel 13 */
-	CHAN2G(2484, 13), /* Channel 14 */
-};
-
-/* Some 5 GHz radios are actually tunable on XXXX-YYYY
- * on 5 MHz steps, we support the channels which we know
- * we have calibration data for all cards though to make
- * this static */
-static struct ieee80211_channel ath9k_5ghz_chantable[] = {
-	/* _We_ call this UNII 1 */
-	CHAN5G(5180, 14), /* Channel 36 */
-	CHAN5G(5200, 15), /* Channel 40 */
-	CHAN5G(5220, 16), /* Channel 44 */
-	CHAN5G(5240, 17), /* Channel 48 */
-	/* _We_ call this UNII 2 */
-	CHAN5G(5260, 18), /* Channel 52 */
-	CHAN5G(5280, 19), /* Channel 56 */
-	CHAN5G(5300, 20), /* Channel 60 */
-	CHAN5G(5320, 21), /* Channel 64 */
-	/* _We_ call this "Middle band" */
-	CHAN5G(5500, 22), /* Channel 100 */
-	CHAN5G(5520, 23), /* Channel 104 */
-	CHAN5G(5540, 24), /* Channel 108 */
-	CHAN5G(5560, 25), /* Channel 112 */
-	CHAN5G(5580, 26), /* Channel 116 */
-	CHAN5G(5600, 27), /* Channel 120 */
-	CHAN5G(5620, 28), /* Channel 124 */
-	CHAN5G(5640, 29), /* Channel 128 */
-	CHAN5G(5660, 30), /* Channel 132 */
-	CHAN5G(5680, 31), /* Channel 136 */
-	CHAN5G(5700, 32), /* Channel 140 */
-	/* _We_ call this UNII 3 */
-	CHAN5G(5745, 33), /* Channel 149 */
-	CHAN5G(5765, 34), /* Channel 153 */
-	CHAN5G(5785, 35), /* Channel 157 */
-	CHAN5G(5805, 36), /* Channel 161 */
-	CHAN5G(5825, 37), /* Channel 165 */
-};
-
-/* Atheros hardware rate code addition for short premble */
-#define SHPCHECK(__hw_rate, __flags) \
-	((__flags & IEEE80211_RATE_SHORT_PREAMBLE) ? (__hw_rate | 0x04 ) : 0)
-
-#define RATE(_bitrate, _hw_rate, _flags) {              \
-	.bitrate        = (_bitrate),                   \
-	.flags          = (_flags),                     \
-	.hw_value       = (_hw_rate),                   \
-	.hw_value_short = (SHPCHECK(_hw_rate, _flags))  \
-}
-
-static struct ieee80211_rate ath9k_legacy_rates[] = {
-	RATE(10, 0x1b, 0),
-	RATE(20, 0x1a, IEEE80211_RATE_SHORT_PREAMBLE),
-	RATE(55, 0x19, IEEE80211_RATE_SHORT_PREAMBLE),
-	RATE(110, 0x18, IEEE80211_RATE_SHORT_PREAMBLE),
-	RATE(60, 0x0b, 0),
-	RATE(90, 0x0f, 0),
-	RATE(120, 0x0a, 0),
-	RATE(180, 0x0e, 0),
-	RATE(240, 0x09, 0),
-	RATE(360, 0x0d, 0),
-	RATE(480, 0x08, 0),
-	RATE(540, 0x0c, 0),
-};
-
 static void ath_cache_conf_rate(struct ath_softc *sc,
 				struct ieee80211_conf *conf)
 {
@@ -221,7 +109,7 @@ static struct ath9k_channel *ath_get_curchannel(struct ath_softc *sc,
 	return channel;
 }
 
-static bool ath9k_setpower(struct ath_softc *sc, enum ath9k_power_mode mode)
+bool ath9k_setpower(struct ath_softc *sc, enum ath9k_power_mode mode)
 {
 	unsigned long flags;
 	bool ret;
@@ -349,7 +237,7 @@ int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
  *  When the task is complete, it reschedules itself depending on the
  *  appropriate interval that was calculated.
  */
-static void ath_ani_calibrate(unsigned long data)
+void ath_ani_calibrate(unsigned long data)
 {
 	struct ath_softc *sc = (struct ath_softc *)data;
 	struct ath_hw *ah = sc->sc_ah;
@@ -504,7 +392,7 @@ static void ath_node_detach(struct ath_softc *sc, struct ieee80211_sta *sta)
 		ath_tx_node_cleanup(sc, an);
 }
 
-static void ath9k_tasklet(unsigned long data)
+void ath9k_tasklet(unsigned long data)
 {
 	struct ath_softc *sc = (struct ath_softc *)data;
 	struct ath_hw *ah = sc->sc_ah;
@@ -924,44 +812,6 @@ static void ath_key_delete(struct ath_common *common, struct ieee80211_key_conf
 	}
 }
 
-static void setup_ht_cap(struct ath_softc *sc,
-			 struct ieee80211_sta_ht_cap *ht_info)
-{
-	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
-	u8 tx_streams, rx_streams;
-
-	ht_info->ht_supported = true;
-	ht_info->cap = IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
-		       IEEE80211_HT_CAP_SM_PS |
-		       IEEE80211_HT_CAP_SGI_40 |
-		       IEEE80211_HT_CAP_DSSSCCK40;
-
-	ht_info->ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K;
-	ht_info->ampdu_density = IEEE80211_HT_MPDU_DENSITY_8;
-
-	/* set up supported mcs set */
-	memset(&ht_info->mcs, 0, sizeof(ht_info->mcs));
-	tx_streams = !(common->tx_chainmask & (common->tx_chainmask - 1)) ?
-		     1 : 2;
-	rx_streams = !(common->rx_chainmask & (common->rx_chainmask - 1)) ?
-		     1 : 2;
-
-	if (tx_streams != rx_streams) {
-		ath_print(common, ATH_DBG_CONFIG,
-			  "TX streams %d, RX streams: %d\n",
-			  tx_streams, rx_streams);
-		ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_RX_DIFF;
-		ht_info->mcs.tx_params |= ((tx_streams - 1) <<
-				IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT);
-	}
-
-	ht_info->mcs.rx_mask[0] = 0xff;
-	if (rx_streams >= 2)
-		ht_info->mcs.rx_mask[1] = 0xff;
-
-	ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_DEFINED;
-}
-
 static void ath9k_bss_assoc_info(struct ath_softc *sc,
 				 struct ieee80211_vif *vif,
 				 struct ieee80211_bss_conf *bss_conf)
@@ -1084,513 +934,6 @@ void ath_radio_disable(struct ath_softc *sc, struct ieee80211_hw *hw)
 	ath9k_setpower(sc, ATH9K_PM_FULL_SLEEP);
 }
 
-static void ath9k_uninit_hw(struct ath_softc *sc)
-{
-	struct ath_hw *ah = sc->sc_ah;
-
-	BUG_ON(!ah);
-
-	ath9k_exit_debug(ah);
-	ath9k_hw_detach(ah);
-	sc->sc_ah = NULL;
-}
-
-static void ath_clean_core(struct ath_softc *sc)
-{
-	struct ieee80211_hw *hw = sc->hw;
-	struct ath_hw *ah = sc->sc_ah;
-	int i = 0;
-
-	ath9k_ps_wakeup(sc);
-
-	dev_dbg(sc->dev, "Detach ATH hw\n");
-
-	ath_deinit_leds(sc);
-	wiphy_rfkill_stop_polling(sc->hw->wiphy);
-
-	for (i = 0; i < sc->num_sec_wiphy; i++) {
-		struct ath_wiphy *aphy = sc->sec_wiphy[i];
-		if (aphy == NULL)
-			continue;
-		sc->sec_wiphy[i] = NULL;
-		ieee80211_unregister_hw(aphy->hw);
-		ieee80211_free_hw(aphy->hw);
-	}
-	ieee80211_unregister_hw(hw);
-	ath_rx_cleanup(sc);
-	ath_tx_cleanup(sc);
-
-	tasklet_kill(&sc->intr_tq);
-	tasklet_kill(&sc->bcon_tasklet);
-
-	if (!(sc->sc_flags & SC_OP_INVALID))
-		ath9k_setpower(sc, ATH9K_PM_AWAKE);
-
-	/* cleanup tx queues */
-	for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
-		if (ATH_TXQ_SETUP(sc, i))
-			ath_tx_cleanupq(sc, &sc->tx.txq[i]);
-
-	if ((sc->btcoex.no_stomp_timer) &&
-	    ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE)
-		ath_gen_timer_free(ah, sc->btcoex.no_stomp_timer);
-}
-
-void ath_detach(struct ath_softc *sc)
-{
-	ath_clean_core(sc);
-	ath9k_uninit_hw(sc);
-}
-
-void ath_cleanup(struct ath_softc *sc)
-{
-	struct ath_hw *ah = sc->sc_ah;
-	struct ath_common *common = ath9k_hw_common(ah);
-
-	ath_clean_core(sc);
-	free_irq(sc->irq, sc);
-	ath_bus_cleanup(common);
-	kfree(sc->sec_wiphy);
-	ieee80211_free_hw(sc->hw);
-
-	ath9k_uninit_hw(sc);
-}
-
-static int ath9k_reg_notifier(struct wiphy *wiphy,
-			      struct regulatory_request *request)
-{
-	struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
-	struct ath_wiphy *aphy = hw->priv;
-	struct ath_softc *sc = aphy->sc;
-	struct ath_regulatory *reg = ath9k_hw_regulatory(sc->sc_ah);
-
-	return ath_reg_notifier_apply(wiphy, request, reg);
-}
-
-/*
- * Read and write, they both share the same lock. We do this to serialize
- * reads and writes on Atheros 802.11n PCI devices only. This is required
- * as the FIFO on these devices can only accept sanely 2 requests. After
- * that the device goes bananas. Serializing the reads/writes prevents this
- * from happening.
- */
-
-static void ath9k_iowrite32(void *hw_priv, u32 val, u32 reg_offset)
-{
-	struct ath_hw *ah = (struct ath_hw *) hw_priv;
-	struct ath_common *common = ath9k_hw_common(ah);
-	struct ath_softc *sc = (struct ath_softc *) common->priv;
-
-	if (ah->config.serialize_regmode == SER_REG_MODE_ON) {
-		unsigned long flags;
-		spin_lock_irqsave(&sc->sc_serial_rw, flags);
-		iowrite32(val, sc->mem + reg_offset);
-		spin_unlock_irqrestore(&sc->sc_serial_rw, flags);
-	} else
-		iowrite32(val, sc->mem + reg_offset);
-}
-
-static unsigned int ath9k_ioread32(void *hw_priv, u32 reg_offset)
-{
-	struct ath_hw *ah = (struct ath_hw *) hw_priv;
-	struct ath_common *common = ath9k_hw_common(ah);
-	struct ath_softc *sc = (struct ath_softc *) common->priv;
-	u32 val;
-
-	if (ah->config.serialize_regmode == SER_REG_MODE_ON) {
-		unsigned long flags;
-		spin_lock_irqsave(&sc->sc_serial_rw, flags);
-		val = ioread32(sc->mem + reg_offset);
-		spin_unlock_irqrestore(&sc->sc_serial_rw, flags);
-	} else
-		val = ioread32(sc->mem + reg_offset);
-	return val;
-}
-
-static const struct ath_ops ath9k_common_ops = {
-	.read = ath9k_ioread32,
-	.write = ath9k_iowrite32,
-};
-
-/*
- * Initialize and fill ath_softc, ath_sofct is the
- * "Software Carrier" struct. Historically it has existed
- * to allow the separation between hardware specific
- * variables (now in ath_hw) and driver specific variables.
- */
-static int ath_init_softc(u16 devid, struct ath_softc *sc, u16 subsysid,
-			  const struct ath_bus_ops *bus_ops)
-{
-	struct ath_hw *ah = NULL;
-	struct ath_common *common;
-	int r = 0, i;
-	int csz = 0;
-	int qnum;
-
-	/* XXX: hardware will not be ready until ath_open() being called */
-	sc->sc_flags |= SC_OP_INVALID;
-
-	spin_lock_init(&sc->wiphy_lock);
-	spin_lock_init(&sc->sc_resetlock);
-	spin_lock_init(&sc->sc_serial_rw);
-	spin_lock_init(&sc->sc_pm_lock);
-	mutex_init(&sc->mutex);
-	tasklet_init(&sc->intr_tq, ath9k_tasklet, (unsigned long)sc);
-	tasklet_init(&sc->bcon_tasklet, ath_beacon_tasklet,
-		     (unsigned long)sc);
-
-	ah = kzalloc(sizeof(struct ath_hw), GFP_KERNEL);
-	if (!ah)
-		return -ENOMEM;
-
-	ah->hw_version.devid = devid;
-	ah->hw_version.subsysid = subsysid;
-	sc->sc_ah = ah;
-
-	common = ath9k_hw_common(ah);
-	common->ops = &ath9k_common_ops;
-	common->bus_ops = bus_ops;
-	common->ah = ah;
-	common->hw = sc->hw;
-	common->priv = sc;
-	common->debug_mask = ath9k_debug;
-
-	/*
-	 * Cache line size is used to size and align various
-	 * structures used to communicate with the hardware.
-	 */
-	ath_read_cachesize(common, &csz);
-	/* XXX assert csz is non-zero */
-	common->cachelsz = csz << 2;	/* convert to bytes */
-
-	r = ath9k_hw_init(ah);
-	if (r) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Unable to initialize hardware; "
-			  "initialization status: %d\n", r);
-		goto bad_free_hw;
-	}
-
-	if (ath9k_init_debug(ah) < 0) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Unable to create debugfs files\n");
-		goto bad_free_hw;
-	}
-
-	/* Get the hardware key cache size. */
-	common->keymax = ah->caps.keycache_size;
-	if (common->keymax > ATH_KEYMAX) {
-		ath_print(common, ATH_DBG_ANY,
-			  "Warning, using only %u entries in %u key cache\n",
-			  ATH_KEYMAX, common->keymax);
-		common->keymax = ATH_KEYMAX;
-	}
-
-	/*
-	 * Reset the key cache since some parts do not
-	 * reset the contents on initial power up.
-	 */
-	for (i = 0; i < common->keymax; i++)
-		ath9k_hw_keyreset(ah, (u16) i);
-
-	/* default to MONITOR mode */
-	sc->sc_ah->opmode = NL80211_IFTYPE_MONITOR;
-
-	/*
-	 * Allocate hardware transmit queues: one queue for
-	 * beacon frames and one data queue for each QoS
-	 * priority.  Note that the hal handles reseting
-	 * these queues at the needed time.
-	 */
-	sc->beacon.beaconq = ath9k_hw_beaconq_setup(ah);
-	if (sc->beacon.beaconq == -1) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Unable to setup a beacon xmit queue\n");
-		r = -EIO;
-		goto bad2;
-	}
-	sc->beacon.cabq = ath_txq_setup(sc, ATH9K_TX_QUEUE_CAB, 0);
-	if (sc->beacon.cabq == NULL) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Unable to setup CAB xmit queue\n");
-		r = -EIO;
-		goto bad2;
-	}
-
-	sc->config.cabqReadytime = ATH_CABQ_READY_TIME;
-	ath_cabq_update(sc);
-
-	for (i = 0; i < ARRAY_SIZE(sc->tx.hwq_map); i++)
-		sc->tx.hwq_map[i] = -1;
-
-	/* Setup data queues */
-	/* NB: ensure BK queue is the lowest priority h/w queue */
-	if (!ath_tx_setup(sc, ATH9K_WME_AC_BK)) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Unable to setup xmit queue for BK traffic\n");
-		r = -EIO;
-		goto bad2;
-	}
-
-	if (!ath_tx_setup(sc, ATH9K_WME_AC_BE)) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Unable to setup xmit queue for BE traffic\n");
-		r = -EIO;
-		goto bad2;
-	}
-	if (!ath_tx_setup(sc, ATH9K_WME_AC_VI)) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Unable to setup xmit queue for VI traffic\n");
-		r = -EIO;
-		goto bad2;
-	}
-	if (!ath_tx_setup(sc, ATH9K_WME_AC_VO)) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Unable to setup xmit queue for VO traffic\n");
-		r = -EIO;
-		goto bad2;
-	}
-
-	/* Initializes the noise floor to a reasonable default value.
-	 * Later on this will be updated during ANI processing. */
-
-	common->ani.noise_floor = ATH_DEFAULT_NOISE_FLOOR;
-	setup_timer(&common->ani.timer, ath_ani_calibrate, (unsigned long)sc);
-
-	if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
-				   ATH9K_CIPHER_TKIP, NULL)) {
-		/*
-		 * Whether we should enable h/w TKIP MIC.
-		 * XXX: if we don't support WME TKIP MIC, then we wouldn't
-		 * report WMM capable, so it's always safe to turn on
-		 * TKIP MIC in this case.
-		 */
-		ath9k_hw_setcapability(sc->sc_ah, ATH9K_CAP_TKIP_MIC,
-				       0, 1, NULL);
-	}
-
-	/*
-	 * Check whether the separate key cache entries
-	 * are required to handle both tx+rx MIC keys.
-	 * With split mic keys the number of stations is limited
-	 * to 27 otherwise 59.
-	 */
-	if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
-				   ATH9K_CIPHER_TKIP, NULL)
-	    && ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
-				      ATH9K_CIPHER_MIC, NULL)
-	    && ath9k_hw_getcapability(ah, ATH9K_CAP_TKIP_SPLIT,
-				      0, NULL))
-		common->splitmic = 1;
-
-	/* turn on mcast key search if possible */
-	if (!ath9k_hw_getcapability(ah, ATH9K_CAP_MCAST_KEYSRCH, 0, NULL))
-		(void)ath9k_hw_setcapability(ah, ATH9K_CAP_MCAST_KEYSRCH, 1,
-					     1, NULL);
-
-	sc->config.txpowlimit = ATH_TXPOWER_MAX;
-
-	/* 11n Capabilities */
-	if (ah->caps.hw_caps & ATH9K_HW_CAP_HT) {
-		sc->sc_flags |= SC_OP_TXAGGR;
-		sc->sc_flags |= SC_OP_RXAGGR;
-	}
-
-	common->tx_chainmask = ah->caps.tx_chainmask;
-	common->rx_chainmask = ah->caps.rx_chainmask;
-
-	ath9k_hw_setcapability(ah, ATH9K_CAP_DIVERSITY, 1, true, NULL);
-	sc->rx.defant = ath9k_hw_getdefantenna(ah);
-
-	if (ah->caps.hw_caps & ATH9K_HW_CAP_BSSIDMASK)
-		memcpy(common->bssidmask, ath_bcast_mac, ETH_ALEN);
-
-	sc->beacon.slottime = ATH9K_SLOT_TIME_9;	/* default to short slot time */
-
-	/* initialize beacon slots */
-	for (i = 0; i < ARRAY_SIZE(sc->beacon.bslot); i++) {
-		sc->beacon.bslot[i] = NULL;
-		sc->beacon.bslot_aphy[i] = NULL;
-	}
-
-	/* setup channels and rates */
-
-	if (test_bit(ATH9K_MODE_11G, sc->sc_ah->caps.wireless_modes)) {
-		sc->sbands[IEEE80211_BAND_2GHZ].channels = ath9k_2ghz_chantable;
-		sc->sbands[IEEE80211_BAND_2GHZ].band = IEEE80211_BAND_2GHZ;
-		sc->sbands[IEEE80211_BAND_2GHZ].n_channels =
-			ARRAY_SIZE(ath9k_2ghz_chantable);
-		sc->sbands[IEEE80211_BAND_2GHZ].bitrates = ath9k_legacy_rates;
-		sc->sbands[IEEE80211_BAND_2GHZ].n_bitrates =
-			ARRAY_SIZE(ath9k_legacy_rates);
-	}
-
-	if (test_bit(ATH9K_MODE_11A, sc->sc_ah->caps.wireless_modes)) {
-		sc->sbands[IEEE80211_BAND_5GHZ].channels = ath9k_5ghz_chantable;
-		sc->sbands[IEEE80211_BAND_5GHZ].band = IEEE80211_BAND_5GHZ;
-		sc->sbands[IEEE80211_BAND_5GHZ].n_channels =
-			ARRAY_SIZE(ath9k_5ghz_chantable);
-		sc->sbands[IEEE80211_BAND_5GHZ].bitrates =
-			ath9k_legacy_rates + 4;
-		sc->sbands[IEEE80211_BAND_5GHZ].n_bitrates =
-			ARRAY_SIZE(ath9k_legacy_rates) - 4;
-	}
-
-	switch (ah->btcoex_hw.scheme) {
-	case ATH_BTCOEX_CFG_NONE:
-		break;
-	case ATH_BTCOEX_CFG_2WIRE:
-		ath9k_hw_btcoex_init_2wire(ah);
-		break;
-	case ATH_BTCOEX_CFG_3WIRE:
-		ath9k_hw_btcoex_init_3wire(ah);
-		r = ath_init_btcoex_timer(sc);
-		if (r)
-			goto bad2;
-		qnum = ath_tx_get_qnum(sc, ATH9K_TX_QUEUE_DATA, ATH9K_WME_AC_BE);
-		ath9k_hw_init_btcoex_hw(ah, qnum);
-		sc->btcoex.bt_stomp_type = ATH_BTCOEX_STOMP_LOW;
-		break;
-	default:
-		WARN_ON(1);
-		break;
-	}
-
-	return 0;
-bad2:
-	/* cleanup tx queues */
-	for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
-		if (ATH_TXQ_SETUP(sc, i))
-			ath_tx_cleanupq(sc, &sc->tx.txq[i]);
-
-bad_free_hw:
-	ath9k_uninit_hw(sc);
-	return r;
-}
-
-void ath_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
-{
-	struct ath_hw *ah = sc->sc_ah;
-
-	hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
-		IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
-		IEEE80211_HW_SIGNAL_DBM |
-		IEEE80211_HW_AMPDU_AGGREGATION |
-		IEEE80211_HW_SUPPORTS_PS |
-		IEEE80211_HW_PS_NULLFUNC_STACK |
-		IEEE80211_HW_SPECTRUM_MGMT;
-
-	if (AR_SREV_9160_10_OR_LATER(sc->sc_ah) || modparam_nohwcrypt)
-		hw->flags |= IEEE80211_HW_MFP_CAPABLE;
-
-	hw->wiphy->interface_modes =
-		BIT(NL80211_IFTYPE_AP) |
-		BIT(NL80211_IFTYPE_STATION) |
-		BIT(NL80211_IFTYPE_ADHOC) |
-		BIT(NL80211_IFTYPE_MESH_POINT);
-
-	if (AR_SREV_5416(ah))
-		hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
-
-	hw->queues = 4;
-	hw->max_rates = 4;
-	hw->channel_change_time = 5000;
-	hw->max_listen_interval = 10;
-	/* Hardware supports 10 but we use 4 */
-	hw->max_rate_tries = 4;
-	hw->sta_data_size = sizeof(struct ath_node);
-	hw->vif_data_size = sizeof(struct ath_vif);
-
-	hw->rate_control_algorithm = "ath9k_rate_control";
-
-	if (test_bit(ATH9K_MODE_11G, sc->sc_ah->caps.wireless_modes))
-		hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
-			&sc->sbands[IEEE80211_BAND_2GHZ];
-	if (test_bit(ATH9K_MODE_11A, sc->sc_ah->caps.wireless_modes))
-		hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
-			&sc->sbands[IEEE80211_BAND_5GHZ];
-}
-
-/* Device driver core initialization */
-int ath_init_device(u16 devid, struct ath_softc *sc, u16 subsysid,
-		    const struct ath_bus_ops *bus_ops)
-{
-	struct ieee80211_hw *hw = sc->hw;
-	struct ath_common *common;
-	struct ath_hw *ah;
-	int error = 0, i;
-	struct ath_regulatory *reg;
-
-	dev_dbg(sc->dev, "Attach ATH hw\n");
-
-	error = ath_init_softc(devid, sc, subsysid, bus_ops);
-	if (error != 0)
-		return error;
-
-	ah = sc->sc_ah;
-	common = ath9k_hw_common(ah);
-
-	/* get mac address from hardware and set in mac80211 */
-
-	SET_IEEE80211_PERM_ADDR(hw, common->macaddr);
-
-	ath_set_hw_capab(sc, hw);
-
-	error = ath_regd_init(&common->regulatory, sc->hw->wiphy,
-			      ath9k_reg_notifier);
-	if (error)
-		return error;
-
-	reg = &common->regulatory;
-
-	if (ah->caps.hw_caps & ATH9K_HW_CAP_HT) {
-		if (test_bit(ATH9K_MODE_11G, ah->caps.wireless_modes))
-			setup_ht_cap(sc,
-				     &sc->sbands[IEEE80211_BAND_2GHZ].ht_cap);
-		if (test_bit(ATH9K_MODE_11A, ah->caps.wireless_modes))
-			setup_ht_cap(sc,
-				     &sc->sbands[IEEE80211_BAND_5GHZ].ht_cap);
-	}
-
-	/* initialize tx/rx engine */
-	error = ath_tx_init(sc, ATH_TXBUF);
-	if (error != 0)
-		goto error_attach;
-
-	error = ath_rx_init(sc, ATH_RXBUF);
-	if (error != 0)
-		goto error_attach;
-
-	INIT_WORK(&sc->chan_work, ath9k_wiphy_chan_work);
-	INIT_DELAYED_WORK(&sc->wiphy_work, ath9k_wiphy_work);
-	sc->wiphy_scheduler_int = msecs_to_jiffies(500);
-
-	error = ieee80211_register_hw(hw);
-
-	if (!ath_is_world_regd(reg)) {
-		error = regulatory_hint(hw->wiphy, reg->alpha2);
-		if (error)
-			goto error_attach;
-	}
-
-	/* Initialize LED control */
-	ath_init_leds(sc);
-
-	ath_start_rfkill_poll(sc);
-
-	return 0;
-
-error_attach:
-	/* cleanup tx queues */
-	for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
-		if (ATH_TXQ_SETUP(sc, i))
-			ath_tx_cleanupq(sc, &sc->tx.txq[i]);
-
-	ath9k_uninit_hw(sc);
-
-	return error;
-}
-
 int ath_reset(struct ath_softc *sc, bool retry_tx)
 {
 	struct ath_hw *ah = sc->sc_ah;
@@ -1648,125 +991,6 @@ int ath_reset(struct ath_softc *sc, bool retry_tx)
 	return r;
 }
 
-/*
- *  This function will allocate both the DMA descriptor structure, and the
- *  buffers it contains.  These are used to contain the descriptors used
- *  by the system.
-*/
-int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd,
-		      struct list_head *head, const char *name,
-		      int nbuf, int ndesc)
-{
-#define	DS2PHYS(_dd, _ds)						\
-	((_dd)->dd_desc_paddr + ((caddr_t)(_ds) - (caddr_t)(_dd)->dd_desc))
-#define ATH_DESC_4KB_BOUND_CHECK(_daddr) ((((_daddr) & 0xFFF) > 0xF7F) ? 1 : 0)
-#define ATH_DESC_4KB_BOUND_NUM_SKIPPED(_len) ((_len) / 4096)
-	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
-	struct ath_desc *ds;
-	struct ath_buf *bf;
-	int i, bsize, error;
-
-	ath_print(common, ATH_DBG_CONFIG, "%s DMA: %u buffers %u desc/buf\n",
-		  name, nbuf, ndesc);
-
-	INIT_LIST_HEAD(head);
-	/* ath_desc must be a multiple of DWORDs */
-	if ((sizeof(struct ath_desc) % 4) != 0) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "ath_desc not DWORD aligned\n");
-		BUG_ON((sizeof(struct ath_desc) % 4) != 0);
-		error = -ENOMEM;
-		goto fail;
-	}
-
-	dd->dd_desc_len = sizeof(struct ath_desc) * nbuf * ndesc;
-
-	/*
-	 * Need additional DMA memory because we can't use
-	 * descriptors that cross the 4K page boundary. Assume
-	 * one skipped descriptor per 4K page.
-	 */
-	if (!(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_4KB_SPLITTRANS)) {
-		u32 ndesc_skipped =
-			ATH_DESC_4KB_BOUND_NUM_SKIPPED(dd->dd_desc_len);
-		u32 dma_len;
-
-		while (ndesc_skipped) {
-			dma_len = ndesc_skipped * sizeof(struct ath_desc);
-			dd->dd_desc_len += dma_len;
-
-			ndesc_skipped = ATH_DESC_4KB_BOUND_NUM_SKIPPED(dma_len);
-		};
-	}
-
-	/* allocate descriptors */
-	dd->dd_desc = dma_alloc_coherent(sc->dev, dd->dd_desc_len,
-					 &dd->dd_desc_paddr, GFP_KERNEL);
-	if (dd->dd_desc == NULL) {
-		error = -ENOMEM;
-		goto fail;
-	}
-	ds = dd->dd_desc;
-	ath_print(common, ATH_DBG_CONFIG, "%s DMA map: %p (%u) -> %llx (%u)\n",
-		  name, ds, (u32) dd->dd_desc_len,
-		  ito64(dd->dd_desc_paddr), /*XXX*/(u32) dd->dd_desc_len);
-
-	/* allocate buffers */
-	bsize = sizeof(struct ath_buf) * nbuf;
-	bf = kzalloc(bsize, GFP_KERNEL);
-	if (bf == NULL) {
-		error = -ENOMEM;
-		goto fail2;
-	}
-	dd->dd_bufptr = bf;
-
-	for (i = 0; i < nbuf; i++, bf++, ds += ndesc) {
-		bf->bf_desc = ds;
-		bf->bf_daddr = DS2PHYS(dd, ds);
-
-		if (!(sc->sc_ah->caps.hw_caps &
-		      ATH9K_HW_CAP_4KB_SPLITTRANS)) {
-			/*
-			 * Skip descriptor addresses which can cause 4KB
-			 * boundary crossing (addr + length) with a 32 dword
-			 * descriptor fetch.
-			 */
-			while (ATH_DESC_4KB_BOUND_CHECK(bf->bf_daddr)) {
-				BUG_ON((caddr_t) bf->bf_desc >=
-				       ((caddr_t) dd->dd_desc +
-					dd->dd_desc_len));
-
-				ds += ndesc;
-				bf->bf_desc = ds;
-				bf->bf_daddr = DS2PHYS(dd, ds);
-			}
-		}
-		list_add_tail(&bf->list, head);
-	}
-	return 0;
-fail2:
-	dma_free_coherent(sc->dev, dd->dd_desc_len, dd->dd_desc,
-			  dd->dd_desc_paddr);
-fail:
-	memset(dd, 0, sizeof(*dd));
-	return error;
-#undef ATH_DESC_4KB_BOUND_CHECK
-#undef ATH_DESC_4KB_BOUND_NUM_SKIPPED
-#undef DS2PHYS
-}
-
-void ath_descdma_cleanup(struct ath_softc *sc,
-			 struct ath_descdma *dd,
-			 struct list_head *head)
-{
-	dma_free_coherent(sc->dev, dd->dd_desc_len, dd->dd_desc,
-			  dd->dd_desc_paddr);
-
-	INIT_LIST_HEAD(head);
-	kfree(dd->dd_bufptr);
-	memset(dd, 0, sizeof(*dd));
-}
-
 int ath_get_hal_qnum(u16 queue, struct ath_softc *sc)
 {
 	int qnum;
@@ -2778,63 +2002,3 @@ struct ieee80211_ops ath9k_ops = {
 	.sw_scan_complete   = ath9k_sw_scan_complete,
 	.rfkill_poll        = ath9k_rfkill_poll_state,
 };
-
-static int __init ath9k_init(void)
-{
-	int error;
-
-	/* Register rate control algorithm */
-	error = ath_rate_control_register();
-	if (error != 0) {
-		printk(KERN_ERR
-			"ath9k: Unable to register rate control "
-			"algorithm: %d\n",
-			error);
-		goto err_out;
-	}
-
-	error = ath9k_debug_create_root();
-	if (error) {
-		printk(KERN_ERR
-			"ath9k: Unable to create debugfs root: %d\n",
-			error);
-		goto err_rate_unregister;
-	}
-
-	error = ath_pci_init();
-	if (error < 0) {
-		printk(KERN_ERR
-			"ath9k: No PCI devices found, driver not installed.\n");
-		error = -ENODEV;
-		goto err_remove_root;
-	}
-
-	error = ath_ahb_init();
-	if (error < 0) {
-		error = -ENODEV;
-		goto err_pci_exit;
-	}
-
-	return 0;
-
- err_pci_exit:
-	ath_pci_exit();
-
- err_remove_root:
-	ath9k_debug_remove_root();
- err_rate_unregister:
-	ath_rate_control_unregister();
- err_out:
-	return error;
-}
-module_init(ath9k_init);
-
-static void __exit ath9k_exit(void)
-{
-	ath_ahb_exit();
-	ath_pci_exit();
-	ath9k_debug_remove_root();
-	ath_rate_control_unregister();
-	printk(KERN_INFO "%s: Driver unloaded\n", dev_info);
-}
-module_exit(ath9k_exit);