diff options
| author | David S. Miller <davem@davemloft.net> | 2011-08-20 10:39:12 -0700 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2011-08-20 10:39:12 -0700 |
| commit | 823dcd2506fa369aeb8cbd26da5663efe2fda9a9 (patch) | |
| tree | 853b3e3c05f0b9ee1b5df8464db19b7acc57150c | |
| parent | eaa36660de7e174498618d69d7277d44a2f24c3d (diff) | |
| parent | 98e77438aed3cd3343cbb86825127b1d9d2bea33 (diff) | |
Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net
265 files changed, 9154 insertions, 8023 deletions
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index e279b724291..78926aa2531 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -2680,6 +2680,27 @@ bytes respectively. Such letter suffixes can also be entirely omitted. vmpoff= [KNL,S390] Perform z/VM CP command after power off. Format: <command> + vsyscall= [X86-64] + Controls the behavior of vsyscalls (i.e. calls to + fixed addresses of 0xffffffffff600x00 from legacy + code). Most statically-linked binaries and older + versions of glibc use these calls. Because these + functions are at fixed addresses, they make nice + targets for exploits that can control RIP. + + emulate [default] Vsyscalls turn into traps and are + emulated reasonably safely. + + native Vsyscalls are native syscall instructions. + This is a little bit faster than trapping + and makes a few dynamic recompilers work + better than they would in emulation mode. + It also makes exploits much easier to write. + + none Vsyscalls don't work at all. This makes + them quite hard to use for exploits but + might break your system. + vt.cur_default= [VT] Default cursor shape. Format: 0xCCBBAA, where AA, BB, and CC are the same as the parameters of the <Esc>[?A;B;Cc escape sequence; diff --git a/Documentation/networking/00-INDEX b/Documentation/networking/00-INDEX index 4edd78dfb36..bbce1215434 100644 --- a/Documentation/networking/00-INDEX +++ b/Documentation/networking/00-INDEX @@ -1,13 +1,21 @@ 00-INDEX - this file +3c359.txt + - information on the 3Com TokenLink Velocity XL (3c5359) driver. 3c505.txt - information on the 3Com EtherLink Plus (3c505) driver. +3c509.txt + - information on the 3Com Etherlink III Series Ethernet cards. 6pack.txt - info on the 6pack protocol, an alternative to KISS for AX.25 DLINK.txt - info on the D-Link DE-600/DE-620 parallel port pocket adapters PLIP.txt - PLIP: The Parallel Line Internet Protocol device driver +README.ipw2100 + - README for the Intel PRO/Wireless 2100 driver. +README.ipw2200 + - README for the Intel PRO/Wireless 2915ABG and 2200BG driver. README.sb1000 - info on General Instrument/NextLevel SURFboard1000 cable modem. alias.txt @@ -20,8 +28,12 @@ atm.txt - info on where to get ATM programs and support for Linux. ax25.txt - info on using AX.25 and NET/ROM code for Linux +batman-adv.txt + - B.A.T.M.A.N routing protocol on top of layer 2 Ethernet Frames. baycom.txt - info on the driver for Baycom style amateur radio modems +bonding.txt + - Linux Ethernet Bonding Driver HOWTO: link aggregation in Linux. bridge.txt - where to get user space programs for ethernet bridging with Linux. can.txt @@ -34,32 +46,60 @@ cxacru.txt - Conexant AccessRunner USB ADSL Modem cxacru-cf.py - Conexant AccessRunner USB ADSL Modem configuration file parser +cxgb.txt + - Release Notes for the Chelsio N210 Linux device driver. +dccp.txt + - the Datagram Congestion Control Protocol (DCCP) (RFC 4340..42). de4x5.txt - the Digital EtherWORKS DE4?? and DE5?? PCI Ethernet driver decnet.txt - info on using the DECnet networking layer in Linux. depca.txt - the Digital DEPCA/EtherWORKS DE1?? and DE2?? LANCE Ethernet driver +dl2k.txt + - README for D-Link DL2000-based Gigabit Ethernet Adapters (dl2k.ko). +dm9000.txt + - README for the Simtec DM9000 Network driver. dmfe.txt - info on the Davicom DM9102(A)/DM9132/DM9801 fast ethernet driver. +dns_resolver.txt + - The DNS resolver module allows kernel servies to make DNS queries. +driver.txt + - Softnet driver issues. e100.txt - info on Intel's EtherExpress PRO/100 line of 10/100 boards e1000.txt - info on Intel's E1000 line of gigabit ethernet boards +e1000e.txt + - README for the Intel Gigabit Ethernet Driver (e1000e). eql.txt - serial IP load balancing ewrk3.txt - the Digital EtherWORKS 3 DE203/4/5 Ethernet driver +fib_trie.txt + - Level Compressed Trie (LC-trie) notes: a structure for routing. filter.txt - Linux Socket Filtering fore200e.txt - FORE Systems PCA-200E/SBA-200E ATM NIC driver info. framerelay.txt - info on using Frame Relay/Data Link Connection Identifier (DLCI). +gen_stats.txt + - Generic networking statistics for netlink users. +generic_hdlc.txt + - The generic High Level Data Link Control (HDLC) layer. generic_netlink.txt - info on Generic Netlink +gianfar.txt + - Gianfar Ethernet Driver. ieee802154.txt - Linux IEEE 802.15.4 implementation, API and drivers +ifenslave.c + - Configure network interfaces for parallel routing (bonding). +igb.txt + - README for the Intel Gigabit Ethernet Driver (igb). +igbvf.txt + - README for the Intel Gigabit Ethernet Driver (igbvf). ip-sysctl.txt - /proc/sys/net/ipv4/* variables ip_dynaddr.txt @@ -68,41 +108,117 @@ ipddp.txt - AppleTalk-IP Decapsulation and AppleTalk-IP Encapsulation iphase.txt - Interphase PCI ATM (i)Chip IA Linux driver info. +ipv6.txt + - Options to the ipv6 kernel module. +ipvs-sysctl.txt + - Per-inode explanation of the /proc/sys/net/ipv4/vs interface. irda.txt - where to get IrDA (infrared) utilities and info for Linux. +ixgb.txt + - README for the Intel 10 Gigabit Ethernet Driver (ixgb). +ixgbe.txt + - README for the Intel 10 Gigabit Ethernet Driver (ixgbe). +ixgbevf.txt + - README for the Intel Virtual Function (VF) Driver (ixgbevf). +l2tp.txt + - User guide to the L2TP tunnel protocol. lapb-module.txt - programming information of the LAPB module. ltpc.txt - the Apple or Farallon LocalTalk PC card driver +mac80211-injection.txt + - HOWTO use packet injection with mac80211 multicast.txt - Behaviour of cards under Multicast +multiqueue.txt + - HOWTO for multiqueue network device support. +netconsole.txt + - The network console module netconsole.ko: configuration and notes. +netdev-features.txt + - Network interface features API description. netdevices.txt - info on network device driver functions exported to the kernel. +netif-msg.txt + - Design of the network interface message level setting (NETIF_MSG_*). +nfc.txt + - The Linux Near Field Communication (NFS) subsystem. olympic.txt - IBM PCI Pit/Pit-Phy/Olympic Token Ring driver info. +operstates.txt + - Overview of network interface operational states. +packet_mmap.txt + - User guide to memory mapped packet socket rings (PACKET_[RT]X_RING). +phonet.txt + - The Phonet packet protocol used in Nokia cellular modems. +phy.txt + - The PHY abstraction layer. +pktgen.txt + - User guide to the kernel packet generator (pktgen.ko). policy-routing.txt - IP policy-based routing +ppp_generic.txt + - Information about the generic PPP driver. +proc_net_tcp.txt + - Per inode overview of the /proc/net/tcp and /proc/net/tcp6 interfaces. +radiotap-headers.txt + - Background on radiotap headers. ray_cs.txt - Raylink Wireless LAN card driver info. +rds.txt + - Background on the reliable, ordered datagram delivery method RDS. +regulatory.txt + - Overview of the Linux wireless regulatory infrastructure. +rxrpc.txt + - Guide to the RxRPC protocol. +s2io.txt + - Release notes for Neterion Xframe I/II 10GbE driver. +scaling.txt + - Explanation of network scaling techniques: RSS, RPS, RFS, aRFS, XPS. +sctp.txt + - Notes on the Linux kernel implementation of the SCTP protocol. +secid.txt + - Explanation of the secid member in flow structures. skfp.txt - SysKonnect FDDI (SK-5xxx, Compaq Netelligent) driver info. smc9.txt - the driver for SMC's 9000 series of Ethernet cards smctr.txt - SMC TokenCard TokenRing Linux driver info. +spider-net.txt + - README for the Spidernet Driver (as found in PS3 / Cell BE). +stmmac.txt + - README for the STMicro Synopsys Ethernet driver. +tc-actions-env-rules.txt + - rules for traffic control (tc) actions. +timestamping.txt + - overview of network packet timestamping variants. tcp.txt - short blurb on how TCP output takes place. +tcp-thin.txt + - kernel tuning options for low rate 'thin' TCP streams. tlan.txt - ThunderLAN (Compaq Netelligent 10/100, Olicom OC-2xxx) driver info. tms380tr.txt - SysKonnect Token Ring ISA/PCI adapter driver info. +tproxy.txt + - Transparent proxy support user guide. tuntap.txt - TUN/TAP device driver, allowing user space Rx/Tx of packets. +udplite.txt + - UDP-Lite protocol (RFC 3828) introduction. vortex.txt - info on using 3Com Vortex (3c590, 3c592, 3c595, 3c597) Ethernet cards. +vxge.txt + - README for the Neterion X3100 PCIe Server Adapter. x25.txt - general info on X.25 development. x25-iface.txt - description of the X.25 Packet Layer to LAPB device interface. +xfrm_proc.txt + - description of the statistics package for XFRM. +xfrm_sync.txt + - sync patches for XFRM enable migration of an SA between hosts. +xfrm_sysctl.txt + - description of the XFRM configuration options. z8530drv.txt - info about Linux driver for Z8530 based HDLC cards for AX.25 diff --git a/Documentation/networking/scaling.txt b/Documentation/networking/scaling.txt new file mode 100644 index 00000000000..58fd7414e6c --- /dev/null +++ b/Documentation/networking/scaling.txt @@ -0,0 +1,378 @@ +Scaling in the Linux Networking Stack + + +Introduction +============ + +This document describes a set of complementary techniques in the Linux +networking stack to increase parallelism and improve performance for +multi-processor systems. + +The following technologies are described: + + RSS: Receive Side Scaling + RPS: Receive Packet Steering + RFS: Receive Flow Steering + Accelerated Receive Flow Steering + XPS: Transmit Packet Steering + + +RSS: Receive Side Scaling +========================= + +Contemporary NICs support multiple receive and transmit descriptor queues +(multi-queue). On reception, a NIC can send different packets to different +queues to distribute processing among CPUs. The NIC distributes packets by +applying a filter to each packet that assigns it to one of a small number +of logical flows. Packets for each flow are steered to a separate receive +queue, which in turn can be processed by separate CPUs. This mechanism is +generally known as “Receive-side Scaling” (RSS). The goal of RSS and +the other scaling techniques to increase performance uniformly. +Multi-queue distribution can also be used for traffic prioritization, but +that is not the focus of these techniques. + +The filter used in RSS is typically a hash function over the network +and/or transport layer headers-- for example, a 4-tuple hash over +IP addresses and TCP ports of a packet. The most common hardware +implementation of RSS uses a 128-entry indirection table where each entry +stores a queue number. The receive queue for a packet is determined +by masking out the low order seven bits of the computed hash for the +packet (usually a Toeplitz hash), taking this number as a key into the +indirection table and reading the corresponding value. + +Some advanced NICs allow steering packets to queues based on +programmable filters. For example, webserver bound TCP port 80 packets +can be directed to their own receive queue. Such “n-tuple” filters can +be configured from ethtool (--config-ntuple). + +==== RSS Configuration + +The driver for a multi-queue capable NIC typically provides a kernel +module parameter for specifying the number of hardware queues to +configure. In the bnx2x driver, for instance, this parameter is called +num_queues. A typical RSS configuration would be to have one receive queue +for each CPU if the device supports enough queues, or otherwise at least +one for each memory domain, where a memory domain is a set of CPUs that +share a particular memory level (L1, L2, NUMA node, etc.). + +The indirection table of an RSS device, which resolves a queue by masked +hash, is usually programmed by the driver at initialization. The +default mapping is to distribute the queues evenly in the table, but the +indirection table can be retrieved and modified at runtime using ethtool +commands (--show-rxfh-indir and --set-rxfh-indir). Modifying the +indirection table could be done to give different queues different +relative weights. + +== RSS IRQ Configuration + +Each receive queue has a separate IRQ associated with it. The NIC triggers +this to notify a CPU when new packets arrive on the given queue. The +signaling path for PCIe devices uses message signaled interrupts (MSI-X), +that can route each interrupt to a particular CPU. The active mapping +of queues to IRQs can be determined from /proc/interrupts. By default, +an IRQ may be handled on any CPU. Because a non-negligible part of packet +processing takes place in receive interrupt handling, it is advantageous +to spread receive interrupts between CPUs. To manually adjust the IRQ +affinity of each interrupt see Documentation/IRQ-affinity. Some systems +will be running irqbalance, a daemon that dynamically optimizes IRQ +assignments and as a result may override any manual settings. + +== Suggested Configuration + +RSS should be enabled when latency is a concern or whenever receive +interrupt processing forms a bottleneck. Spreading load between CPUs +decreases queue length. For low latency networking, the optimal setting +is to allocate as many queues as there are CPUs in the system (or the +NIC maximum, if lower). The most efficient high-rate configuration +is likely the one with the smallest number of receive queues where no +receive queue overflows due to a saturated CPU, because in default +mode with interrupt coalescing enabled, the aggregate number of +interrupts (and thus work) grows with each additional queue. + +Per-cpu load can be observed using the mpstat utility, but note that on +processors with hyperthreading (HT), each hyperthread is represented as +a separate CPU. For interrupt handling, HT has shown no benefit in +initial tests, so limit the number of queues to the number of CPU cores +in the system. + + +RPS: Receive Packet Steering +============================ + +Receive Packet Steering (RPS) is logically a software implementation of +RSS. Being in software, it is necessarily called later in the datapath. +Whereas RSS selects the queue and hence CPU that will run the hardware +interrupt handler, RPS selects the CPU to perform protocol processing +above the interrupt handler. This is accomplished by placing the packet +on the desired CPU’s backlog queue and waking up the CPU for processing. +RPS has some advantages over RSS: 1) it can be used with any NIC, +2) software filters can easily be added to hash over new protocols, +3) it does not increase hardware device interrupt rate (although it does +introduce inter-processor interrupts (IPIs)). + +RPS is called during bottom half of the receive interrupt handler, when +a driver sends a packet up the network stack with netif_rx() or +netif_receive_skb(). These call the get_rps_cpu() function, which +selects the queue that should process a packet. + +The first step in determining the target CPU for RPS is to calculate a +flow hash over the packet’s addresses or ports (2-tuple or 4-tuple hash +depending on the protocol). This serves as a consistent hash of the +associated flow of the packet. The hash is either provided by hardware +or will be computed in the stack. Capable hardware can pass the hash in +the receive descriptor for the packet; this would usually be the same +hash used for RSS (e.g. computed Toeplitz hash). The hash is saved in +skb->rx_hash and can be used elsewhere in the stack as a hash of the +packet’s flow. + +Each receive hardware queue has an associated list of CPUs to which +RPS may enqueue packets for processing. For each received packet, +an index into the list is computed from the flow hash modulo the size +of the list. The indexed CPU is the target for processing the packet, +and the packet is queued to the tail of that CPU’s backlog queue. At +the end of the bottom half routine, IPIs are sent to any CPUs for which +packets have been queued to their backlog queue. The IPI wakes backlog +processing on the remote CPU, and any queued packets are then processed +up the networking stack. + +==== RPS Configuration + +RPS requires a kernel compiled with the CONFIG_RPS kconfig symbol (on +by default for SMP). Even when compiled in, RPS remains disabled until +explicitly configured. The list of CPUs to which RPS may forward traffic +can be configured for each receive queue using a sysfs file entry: + + /sys/class/net/<dev>/queues/rx-<n>/rps_cpus + +This file implements a bitmap of CPUs. RPS is disabled when it is zero +(the default), in which case packets are processed on the interrupting +CPU. Documentation/IRQ-affinity.txt explains how CPUs are assigned to +the bitmap. + +== Suggested Configuration + +For a single queue device, a typical RPS configuration would be to set +the rps_cpus to the CPUs in the same memory domain of the interrupting +CPU. If NUMA locality is not an issue, this could also be all CPUs in +the system. At high interrupt rate, it might be wise to exclude the +interrupting CPU from the map since that already performs much work. + +For a multi-queue system, if RSS is configured so that a hardware +receive queue is mapped to each CPU, then RPS is probably redundant +and unnecessary. If there are fewer hardware queues than CPUs, then +RPS might be beneficial if the rps_cpus for each queue are the ones that +share the same memory domain as the interrupting CPU for that queue. + + +RFS: Receive Flow Steering +========================== + +While RPS steers packets solely based on hash, and thus generally +provides good load distribution, it does not take into account +application locality. This is accomplished by Receive Flow Steering +(RFS). The goal of RFS is to increase datacache hitrate by steering +kernel processing of packets to the CPU where the application thread +consuming the packet is running. RFS relies on the same RPS mechanisms +to enqueue packets onto the backlog of another CPU and to wake up that +CPU. + +In RFS, packets are not forwarded directly by the value of their hash, +but the hash is used as index into a flow lookup table. This table maps +flows to the CPUs where those flows are being processed. The flow hash +(see RPS section above) is used to calculate the index into this table. +The CPU recorded in each entry is the one which last processed the flow. +If an entry does not hold a valid CPU, then packets mapped to that entry +are steered using plain RPS. Multiple table entries may point to the +same CPU. Indeed, with many flows and few CPUs, it is very likely that +a single application thread handles flows with many different flow hashes. + +rps_sock_table is a global flow table that contains the *desired* CPU for +flows: the CPU that is currently processing the flow in userspace. Each +table value is a CPU index that is updated during calls to recvmsg and +sendmsg (specifically, inet_recvmsg(), inet_sendmsg(), inet_sendpage() +and tcp_splice_read()). + +When the scheduler moves a thread to a new CPU while it has outstanding +receive packets on the old CPU, packets may arrive out of order. To +avoid this, RFS uses a second flow table to track outstanding packets +for each flow: rps_dev_flow_table is a table specific to each hardware +receive queue of each device. Each table value stores a CPU index and a +counter. The CPU index represents the *current* CPU onto which packets +for this flow are enqueued for further kernel processing. Ideally, kernel +and userspace processing occur on the same CPU, and hence the CPU index +in both tables is identical. This is likely false if the scheduler has +recently migrated a userspace thread while the kernel still has packets +enqueued for kernel processing on the old CPU. + +The counter in rps_dev_flow_table values records the length of the current +CPU's backlog when a packet in this flow was last enqueued. Each backlog +queue has a head counter that is incremented on dequeue. A tail counter +is computed as head counter + queue length. In other words, the counter +in rps_dev_flow_table[i] records the last element in flow i that has +been enqueued onto the currently designated CPU for flow i (of course, +entry i is actually selected by hash and multiple flows may hash to the +same entry i). + +And now the trick for avoiding out of order packets: when selecting the +CPU for packet processing (from get_rps_cpu()) the rps_sock_flow table +and the rps_dev_flow table of the queue that the packet was received on +are compared. If the desired CPU for the flow (found in the +rps_sock_flow table) matches the current CPU (found in the rps_dev_flow +table), the packet is enqueued onto that CPU’s backlog. If they differ, +the current CPU is updated to match the desired CPU if one of the +following is true: + +- The current CPU's queue head counter >= the recorded tail counter + value in rps_dev_flow[i] +- The current CPU is unset (equal to NR_CPUS) +- The current CPU is offline + +After this check, the packet is sent to the (possibly updated) current +CPU. These rules aim to ensure that a flow only moves to a new CPU when +there are no packets outstanding on the old CPU, as the outstanding +packets could arrive later than those about to be processed on the new +CPU. + +==== RFS Configuration + +RFS is only available if the kconfig symbol CONFIG_RFS is enabled (on +by default for SMP). The functionality remains disabled until explicitly +configured. The number of entries in the global flow table is set through: + + /proc/sys/net/core/rps_sock_flow_entries + +The number of entries in the per-queue flow table are set through: + + /sys/class/net/<dev>/queues/tx-<n>/rps_flow_cnt + +== Suggested Configuration + +Both of these need to be set before RFS is enabled for a receive queue. +Values for both are rounded up to the nearest power of two. The +suggested flow count depends on the expected number of active connections +at any given time, which may be significantly less than the number of open +connections. We have found that a value of 32768 for rps_sock_flow_entries +works fairly well on a moderately loaded server. + +For a single queue device, the rps_flow_cnt value for the single queue +would normally be configured to the same value as rps_sock_flow_entries. +For a multi-queue device, the rps_flow_cnt for each queue might be +configured as rps_sock_flow_entries / N, where N is the number of +queues. So for instance, if rps_flow_entries is set to 32768 and there +are 16 configured receive queues, rps_flow_cnt for each queue might be +configured as 2048. + + +Accelerated RFS +=============== + +Accelerated RFS is to RFS what RSS is to RPS: a hardware-accelerated load +balancing mechanism that uses soft state to steer flows based on where +the application thread consuming the packets of each flow is running. +Accelerated RFS should perform better than RFS since packets are sent +directly to a CPU local to the thread consuming the data. The target CPU +will either be the same CPU where the application runs, or at least a CPU +which is local to the application thread’s CPU in the cache hierarchy. + +To enable accelerated RFS, the networking stack calls the +ndo_rx_flow_steer driver function to communicate the desired hardware +queue for packets matching a particular flow. The network stack +automatically calls this function every time a flow entry in +rps_dev_flow_table is updated. The driver in turn uses a device specific +method to program the NIC to steer the packets. + +The hardware queue for a flow is derived from the CPU recorded in +rps_dev_flow_table. The stack consults a CPU to hardware queue map which +is maintained by the NIC driver. This is an auto-generated reverse map of +the IRQ affinity table shown by /proc/interrupts. Drivers can use +functions in the cpu_rmap (“CPU affinity reverse map”) kernel library +to populate the map. For each CPU, the corresponding queue in the map is +set to be one whose processing CPU is closest in cache locality. + +==== Accelerated RFS Configuration + +Accelerated RFS is only available if the kernel is compiled with +CONFIG_RFS_ACCEL and support is provided by the NIC device and driver. +It also requires that ntuple filtering is enabled via ethtool. The map +of CPU to queues is automatically deduced from the IRQ affinities +configured for each receive queue by the driver, so no additional +configuration should be necessary. + +== Suggested Configuration + +This technique should be enabled whenever one wants to use RFS and the +NIC supports hardware acceleration. + +XPS: Transmit Packet Steering +============================= + +Transmit Packet Steering is a mechanism for intelligently selecting +which transmit queue to use when transmitting a packet on a multi-queue +device. To accomplish this, a mapping from CPU to hardware queue(s) is +recorded. The goal of this mapping is usually to assign queues +exclusively to a subset of CPUs, where the transmit completions for +these queues are processed on a CPU within this set. This choice +provides two benefits. First, contention on the device queue lock is +significantly reduced since fewer CPUs contend for the same queue +(contention can be eliminated completely if each CPU has its own +transmit queue). Secondly, cache miss rate on transmit completion is +reduced, in particular for data cache lines that hold the sk_buff +structures. + +XPS is configured per transmit queue by setting a bitmap of CPUs that +may use that queue to transmit. The reverse mapping, from CPUs to +transmit queues, is computed and maintained for each network device. +When transmitting the first packet in a flow, the function +get_xps_queue() is called to select a queue. This function uses the ID +of the running CPU as a key into the CPU-to-queue lookup table. If the +ID matches a single queue, that is used for transmission. If multiple +queues match, one is selected by using the flow hash to compute an index +into the set. + +The queue chosen for transmitting a particular flow is saved in the +corresponding socket structure for the flow (e.g. a TCP connection). +This transmit queue is used for subsequent packets sent on the flow to +prevent out of order (ooo) packets. The choice also amortizes the cost +of calling get_xps_queues() over all packets in the flow. To avoid +ooo packets, the queue for a flow can subsequently only be changed if +skb->ooo_okay is set for a packet in the flow. This flag indicates that +there are no outstanding packets in the flow, so the transmit queue can +change without the risk of generating out of order packets. The +transport layer is responsible for setting ooo_okay appropriately. TCP, +for instance, sets the flag when all data for a connection has been +acknowledged. + +==== XPS Configuration + +XPS is only available if the kconfig symbol CONFIG_XPS is enabled (on by +default for SMP). The functionality remains disabled until explicitly +configured. To enable XPS, the bitmap of CPUs that may use a transmit +queue is configured using the sysfs file entry: + +/sys/class/net/<dev>/queues/tx-<n>/xps_cpus + +== Suggested Configuration + +For a network device with a single transmission queue, XPS configuration +has no effect, since there is no choice in this case. In a multi-queue +system, XPS is preferably configured so that each CPU maps onto one queue. +If there are as many queues as there are CPUs in the system, then each +queue can also map onto one CPU, resulting in exclusive pairings that +experience no contention. If there are fewer queues than CPUs, then the +best CPUs to share a given queue are probably those that share the cache +with the CPU that processes transmit completions for that queue +(transmit interrupts). + + +Further Information +=================== +RPS and RFS were introduced in kernel 2.6.35. XPS was incorporated into +2.6.38. Original patches were submitted by Tom Herbert +(therbert@google.com) + +Accelerated RFS was introduced in 2.6.35. Original patches were +submitted by Ben Hutchings (bhutchings@solarflare.com) + +Authors: +Tom Herbert (therbert@google.com) +Willem de Bruijn (willemb@google.com) diff --git a/MAINTAINERS b/MAINTAINERS index fd474a05cba..d32e1ca5ba7 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3898,9 +3898,9 @@ F: arch/powerpc/platforms/powermac/ F: drivers/macintosh/ LINUX FOR POWERPC EMBEDDED MPC5XXX -M: Grant Likely <grant.likely@secretlab.ca> +M: Anatolij Gustschin <agust@denx.de> L: linuxppc-dev@lists.ozlabs.org -T: git git://git.secretlab.ca/git/linux-2.6.git +T: git git://git.denx.de/linux-2.6-agust.git S: Maintained F: arch/powerpc/platforms/512x/ F: arch/powerpc/platforms/52xx/ @@ -7351,7 +7351,7 @@ THE REST M: Linus Torvalds <torvalds@linux-foundation.org> L: linux-kernel@vger.kernel.org Q: http://patchwork.kernel.org/project/LKML/list/ -T: git git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git S: Buried alive in reporters F: * F: */ @@ -1,7 +1,7 @@ VERSION = 3 -PATCHLEVEL = 0 +PATCHLEVEL = 1 SUBLEVEL = 0 -EXTRAVERSION = +EXTRAVERSION = -rc1 NAME = Sneaky Weasel # *DOCUMENTATION* diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 2c71a8f3535..5ebc5d922ea 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -195,8 +195,7 @@ config VECTORS_BASE The base address of exception vectors. config ARM_PATCH_PHYS_VIRT - bool "Patch physical to virtual translations at runtime (EXPERIMENTAL)" - depends on EXPERIMENTAL + bool "Patch physical to virtual translations at runtime" depends on !XIP_KERNEL && MMU depends on !ARCH_REALVIEW || !SPARSEMEM help diff --git a/arch/arm/kernel/iwmmxt.S b/arch/arm/kernel/iwmmxt.S index 7fa3bb0d239..a08783823b3 100644 --- a/arch/arm/kernel/iwmmxt.S +++ b/arch/arm/kernel/iwmmxt.S @@ -195,10 +195,10 @@ ENTRY(iwmmxt_task_disable) @ enable access to CP0 and CP1 XSC(mrc p15, 0, r4, c15, c1, 0) - XSC(orr r4, r4, #0xf) + XSC(orr r4, r4, #0x3) XSC(mcr p15, 0, r4, c15, c1, 0) PJ4(mrc p15, 0, r4, c1, c0, 2) - PJ4(orr r4, r4, #0x3) + PJ4(orr r4, r4, #0xf) PJ4(mcr p15, 0, r4, c1, c0, 2) mov r0, #0 @ nothing to load @@ -313,7 +313,7 @@ ENTRY(iwmmxt_task_switch) teq r2, r3 @ next task owns it? movne pc, lr @ no: leave Concan disabled -1: @ flip Conan access +1: @ flip Concan access XSC(eor r1, r1, #0x3) XSC(mcr p15, 0, r1, c15, c1, 0) PJ4(eor r1, r1, #0xf) diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index 05b377616fd..cc2020c2c70 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -323,7 +323,11 @@ int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs, #endif s = find_mod_section(hdr, sechdrs, ".alt.smp.init"); if (s && !is_smp()) +#ifdef CONFIG_SMP_ON_UP fixup_smp((void *)s->sh_addr, s->sh_size); +#else + return -EINVAL; +#endif return 0; } diff --git a/arch/arm/mach-imx/clock-imx25.c b/arch/arm/mach-imx/clock-imx25.c index 0fc7ba56d61..e63e23504fe 100644 --- a/arch/arm/mach-imx/clock-imx25.c +++ b/arch/arm/mach-imx/clock-imx25.c @@ -331,6 +331,9 @@ int __init mx25_clocks_init(void) __raw_writel(__raw_readl(CRM_BASE+0x64) | (1 << 7) | (1 << 0), CRM_BASE + 0x64); + /* Clock source for gpt is ahb_div */ + __raw_writel(__raw_readl(CRM_BASE+0x64) & ~(1 << 5), CRM_BASE + 0x64); + mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54); return 0; diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index 6707de0ab71..6778f8193bc 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -30,6 +30,7 @@ #include <linux/input.h> #include <linux/gpio.h> #include <linux/delay.h> +#include <sound/tlv320aic32x4.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> @@ -196,6 +197,17 @@ static struct pca953x_platform_data visstrim_m10_pca9555_pdata = { .invert = 0, }; +static struct aic32x4_pdata visstrim_m10_aic32x4_pdata = { + .power_cfg = AIC32X4_PWR_MICBIAS_2075_LDOIN | + AIC32X4_PWR_AVDD_DVDD_WEAK_DISABLE | + AIC32X4_PWR_AIC32X4_LDO_ENABLE | + AIC32X4_PWR_CMMODE_LDOIN_RANGE_18_36 | + AIC32X4_PWR_CMMODE_HP_LDOIN_POWERED, + .micpga_routing = AIC32X4_MICPGA_ROUTE_LMIC_IN2R_10K | + AIC32X4_MICPGA_ROUTE_RMIC_IN1L_10K, + .swapdacs = false, +}; + static struct i2c_board_info visstrim_m10_i2c_devices[] = { { I2C_BOARD_INFO("pca9555", 0x20), @@ -203,6 +215,7 @@ static struct i2c_board_info visstrim_m10_i2c_devices[] = { }, { I2C_BOARD_INFO("tlv320aic32x4", 0x18), + .platform_data = &visstrim_m10_aic32x4_pdata, } }; diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c index 0ce49478a47..29ca8907a78 100644 --- a/arch/arm/mach-imx/mach-mx31ads.c +++ b/arch/arm/mach-imx/mach-mx31ads.c @@ -468,7 +468,7 @@ static struct i2c_board_info __initdata mx31ads_i2c1_devices[] = { #endif }; -static void mxc_init_i2c(void) +static void __init mxc_init_i2c(void) { i2c_register_board_info(1, mx31ads_i2c1_devices, ARRAY_SIZE(mx31ads_i2c1_devices)); @@ -486,7 +486,7 @@ static unsigned int ssi_pins[] = { MX31_PIN_STXD5__STXD5, }; -static void mxc_init_audio(void) +static void __init mxc_init_audio(void) { imx31_add_imx_ssi(0, NULL); mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi"); diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c index 750368ddf0f..126913ad106 100644 --- a/arch/arm/mach-imx/mach-mx31lilly.c +++ b/arch/arm/mach-imx/mach-mx31lilly.c @@ -192,7 +192,7 @@ static struct mxc_usbh_platform_data usbh2_pdata __initdata = { .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, }; -static void lilly1131_usb_init(void) +static void __init lilly1131_usb_init(void) { imx31_add_mxc_ehci_hs(1, &usbh1_pdata); diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c index c070c24255f..98e25d9aaab 100644 --- a/arch/arm/mach-mmp/gplugd.c +++ b/arch/arm/mach-mmp/gplugd.c @@ -16,16 +16,18 @@ #include <mach/gpio.h> #include <mach/pxa168.h> #include <mach/mfp-pxa168.h> -#include <mach/mfp-gplugd.h> #include "common.h" static unsigned long gplugd_pin_config[] __initdata = { /* UART3 */ - GPIO8_UART3_SOUT, - GPIO9_UART3_SIN, - GPI1O_UART3_CTS, - GPI11_UART3_RTS, + GPIO8_UART3_TXD, + GPIO9_UART3_RXD, + GPIO1O_UART3_CTS, + GPIO11_UART3_RTS, + + /* USB OTG PEN */ + GPIO18_GPIO, /* MMC2 */ GPIO28_MMC2_CMD, @@ -109,6 +111,12 @@ static unsigned long gplugd_pin_config[] __initdata = { GPIO105_CI2C_SDA, GPIO106_CI2C_SCL, + /* SPI NOR Flash on SSP2 */ + GPIO107_SSP2_RXD, + GPIO108_SSP2_TXD, + GPIO110_GPIO, /* SPI_CSn */ + GPIO111_SSP2_CLK, + /* Select JTAG */ GPIO109_GPIO, @@ -154,7 +162,7 @@ static void __init select_disp_freq(void) "frequency\n"); } else { gpio_direction_output(35, 1); - gpio_free(104); + gpio_free(35); } if (unlikely(gpio_request(85, "DISP_FREQ_SEL_2"))) { @@ -162,7 +170,7 @@ static void __init select_disp_freq(void) "frequency\n"); } else { gpio_direction_output(85, 0); - gpio_free(104); + gpio_free(85); } } diff --git a/arch/arm/mach-mmp/include/mach/mfp-gplugd.h b/arch/arm/mach-mmp/include/mach/mfp-gplugd.h deleted file mode 100644 index b8cf38d8560..00000000000 --- a/arch/arm/mach-mmp/include/mach/mfp-gplugd.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * linux/arch/arm/mach-mmp/include/mach/mfp-gplugd.h - * - * MFP definitions used in gplugD - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __MACH_MFP_GPLUGD_H -#define __MACH_MFP_GPLUGD_H - -#include <plat/mfp.h> -#include <mach/mfp.h> - -/* UART3 */ -#define GPIO8_UART3_SOUT MFP_CFG(GPIO8, AF2) -#define GPIO9_UART3_SIN MFP_CFG(GPIO9, AF2) -#define GPI1O_UART3_CTS MFP_CFG(GPIO10, AF2) -#define GPI11_UART3_RTS MFP_CFG(GPIO11, AF2) - -/* MMC2 */ -#define GPIO28_MMC2_CMD MFP_CFG_DRV(GPIO28, AF6, FAST) -#define GPIO29_MMC2_CLK MFP_CFG_DRV(GPIO29, AF6, FAST) -#define GPIO30_MMC2_DAT0 MFP_CFG_DRV(GPIO30, AF6, FAST) -#define GPIO31_MMC2_DAT1 MFP_CFG_DRV(GPIO31, AF6, FAST) -#define GPIO32_MMC2_DAT2 MFP_CFG_DRV(GPIO32, AF6, FAST) -#define GPIO33_MMC2_DAT3 MFP_CFG_DRV(GPIO33, AF6, FAST) - -/* I2S */ -#undef GPIO114_I2S_FRM -#undef GPIO115_I2S_BCLK - -#define GPIO114_I2S_FRM MFP_CFG_DRV(GPIO114, AF1, FAST) -#define GPIO115_I2S_BCLK MFP_CFG_DRV(GPIO115, AF1, FAST) -#define GPIO116_I2S_TXD MFP_CFG_DRV(GPIO116, AF1, FAST) - -/* MMC4 */ -#define GPIO125_MMC4_DAT3 MFP_CFG_DRV(GPIO125, AF7, FAST) -#define GPIO126_MMC4_DAT2 MFP_CFG_DRV(GPIO126, AF7, FAST) -#define GPIO127_MMC4_DAT1 MFP_CFG_DRV(GPIO127, AF7, FAST) -#define GPIO0_2_MMC4_DAT0 MFP_CFG_DRV(GPIO0_2, AF7, FAST) -#define GPIO1_2_MMC4_CMD MFP_CFG_DRV(GPIO1_2, AF7, FAST) -#define GPIO2_2_MMC4_CLK MFP_CFG_DRV(GPIO2_2, AF7, FAST) - -/* OTG GPIO */ -#define GPIO_USB_OTG_PEN 18 -#define GPIO_USB_OIDIR 20 - -/* Other GPIOs are 35, 84, 85 */ -#endif /* __MACH_MFP_GPLUGD_H */ diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h index 8c782328b21..92aaa3c19d6 100644 --- a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h +++ b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h @@ -203,6 +203,10 @@ #define GPIO33_CF_nCD2 MFP_CFG(GPIO33, AF3) /* UART */ +#define GPIO8_UART3_TXD MFP_CFG(GPIO8, AF2) +#define GPIO9_UART3_RXD MFP_CFG(GPIO9, AF2) +#define GPIO1O_UART3_CTS MFP_CFG(GPIO10, AF2) +#define GPIO11_UART3_RTS MFP_CFG(GPIO11, AF2) #define GPIO88_UART2_TXD MFP_CFG(GPIO88, AF2) #define GPIO89_UART2_RXD MFP_CFG(GPIO89, AF2) #define GPIO107_UART1_TXD MFP_CFG_DRV(GPIO107, AF1, FAST) @@ -232,6 +236,22 @@ #define GPIO53_MMC1_CD MFP_CFG(GPIO53, AF1) #define GPIO46_MMC1_WP MFP_CFG(GPIO46, AF1) +/* MMC2 */ +#define GPIO28_MMC2_CMD MFP_CFG_DRV(GPIO28, AF6, FAST) +#define GPIO29_MMC2_CLK MFP_CFG_DRV(GPIO29, AF6, FAST) +#define GPIO30_MMC2_DAT0 MFP_CFG_DRV(GPIO30, AF6, FAST) +#define GPIO31_MMC2_DAT1 MFP_CFG_DRV(GPIO31, AF6, FAST) +#define GPIO32_MMC2_DAT2 MFP_CFG_DRV(GPIO32, AF6, FAST) +#define GPIO33_MMC2_DAT3 MFP_CFG_DRV(GPIO33, AF6, FAST) + +/* MMC4 */ +#define GPIO125_MMC4_DAT3 MFP_CFG_DRV(GPIO125, AF7, FAST) +#define GPIO126_MMC4_DAT2 MFP_CFG_DRV(GPIO126, AF7, FAST) +#define GPIO127_MMC4_DAT1 MFP_CFG_DRV(GPIO127, AF7, FAST) +#define GPIO0_2_MMC4_DAT0 MFP_CFG_DRV(GPIO0_2, AF7, FAST) +#define GPIO1_2_MMC4_CMD MFP_CFG_DRV(GPIO1_2, AF7, FAST) +#define GPIO2_2_MMC4_CLK MFP_CFG_DRV(GPIO2_2, AF7, FAST) + /* LCD */ #define GPIO84_LCD_CS MFP_CFG(GPIO84, AF1) #define GPIO60_LCD_DD0 MFP_CFG(GPIO60, AF1) @@ -269,11 +289,12 @@ #define GPIO106_CI2C_SCL MFP_CFG(GPIO106, AF1) /* I2S */ -#define GPIO113_I2S_MCLK MFP_CFG(GPIO113,AF6) -#define GPIO114_I2S_FRM MFP_CFG(GPIO114,AF1) -#define GPIO115_I2S_BCLK MFP_CFG(GPIO115,AF1) -#define GPIO116_I2S_RXD MFP_CFG(GPIO116,AF2) -#define GPIO117_I2S_TXD MFP_CFG(GPIO117,AF2) +#define GPIO113_I2S_MCLK MFP_CFG(GPIO113, AF6) +#define GPIO114_I2S_FRM MFP_CFG(GPIO114, AF1) +#define GPIO115_I2S_BCLK MFP_CFG(GPIO115, AF1) +#define GPIO116_I2S_RXD MFP_CFG(GPIO116, AF2) +#define GPIO116_I2S_TXD MFP_CFG(GPIO116, AF1) +#define GPIO117_I2S_TXD MFP_CFG(GPIO117, AF2) /* PWM */ #define GPIO96_PWM3_OUT MFP_CFG(GPIO96, AF1) @@ -324,4 +345,10 @@ #define GPIO101_MII_MDIO MFP_CFG(GPIO101, AF5) #define GPIO103_RX_DV MFP_CFG(GPIO103, AF5) +/* SSP2 */ +#define GPIO107_SSP2_RXD MFP_CFG(GPIO107, AF4) +#define GPIO108_SSP2_TXD MFP_CFG(GPIO108, AF4) +#define GPIO111_SSP2_CLK MFP_CFG(GPIO111, AF4) +#define GPIO112_SSP2_FRM MFP_CFG(GPIO112, AF4) + #endif /* __ASM_MACH_MFP_PXA168_H */ diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c index 99833b9485c..4e91ee6e27c 100644 --- a/arch/arm/mach-mmp/time.c +++ b/arch/arm/mach-mmp/time.c @@ -51,12 +51,12 @@ static inline uint32_t timer_read(void) { int delay = 100; - __raw_writel(1, TIMERS_VIRT_BASE + TMR_CVWR(0)); + __raw_writel(1, TIMERS_VIRT_BASE + TMR_CVWR(1)); while (delay--) cpu_relax(); - return __raw_readl(TIMERS_VIRT_BASE + TMR_CVWR(0)); + return __raw_readl(TIMERS_VIRT_BASE + TMR_CVWR(1)); } unsigned long long notrace sched_clock(void) @@ -75,28 +75,51 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id) { struct clock_event_device *c = dev_id; - /* disable and clear pending interrupt status */ - __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(0)); - __raw_writel(0x1, TIMERS_VIRT_BASE + TMR_ICR(0)); + /* + * Clear pending interrupt status. + */ + __raw_writel(0x01, TIMERS_VIRT_BASE + TMR_ICR(0)); + + /* + * Disable timer 0. + */ + __raw_writel(0x02, TIMERS_VIRT_BASE + TMR_CER); + c->event_handler(c); + return IRQ_HANDLED; } static int timer_set_next_event(unsigned long delta, struct clock_event_device *dev) { - unsigned long flags, next; + unsigned long flags; local_irq_save(flags); - /* clear pending interrupt status and enable */ + /* + * Disable timer 0. + */ + __raw_writel(0x02, TIMERS_VIRT_BASE + TMR_CER); + + /* + * Clear and enable timer match 0 interrupt. + */ __raw_writel(0x01, TIMERS_VIRT_BASE + TMR_ICR(0)); __raw_writel(0x01, TIMERS_VIRT_BASE + TMR_IER(0)); - next = timer_read() + delta; - __raw_writel(next, TIMERS_VIRT_BASE + TMR_TN_MM(0, 0)); + /* + * Setup new clockevent timer value. + */ + __raw_writel(delta - 1, TIMERS_VIRT_BASE + TMR_TN_MM(0, 0)); + + /* + * Enable timer 0. + */ + __raw_writel(0x03, TIMERS_VIRT_BASE + TMR_CER); local_irq_restore(flags); + return 0; } @@ -145,23 +168,26 @@ static struct clocksource cksrc = { static void __init timer_config(void) { uint32_t ccr = __raw_readl(TIMERS_VIRT_BASE + TMR_CCR); - uint32_t cer = __raw_readl(TIMERS_VIRT_BASE + TMR_CER); - uint32_t cmr = __raw_readl(TIMERS_VIRT_BASE + TMR_CMR); - __raw_writel(cer & ~0x1, TIMERS_VIRT_BASE + TMR_CER); /* disable */ + __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_CER); /* disable */ - ccr &= (cpu_is_mmp2()) ? TMR_CCR_CS_0(0) : TMR_CCR_CS_0(3); + ccr &= (cpu_is_mmp2()) ? (TMR_CCR_CS_0(0) | TMR_CCR_CS_1(0)) : + (TMR_CCR_CS_0(3) | TMR_CCR_CS_1(3)); __raw_writel(ccr, TIMERS_VIRT_BASE + TMR_CCR); - /* free-running mode */ - __raw_writel(cmr | 0x01, TIMERS_VIRT_BASE + TMR_CMR); + /* set timer 0 to periodic mode, and timer 1 to free-running mode */ + __raw_writel(0x2, TIMERS_VIRT_BASE + TMR_CMR); - __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_PLCR(0)); /* free-running */ + __raw_writel(0x1, TIMERS_VIRT_BASE + TMR_PLCR(0)); /* periodic */ __raw_writel(0x7, TIMERS_VIRT_BASE + TMR_ICR(0)); /* clear status */ __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(0)); - /* enable timer counter */ - __raw_writel(cer | 0x01, TIMERS_VIRT_BASE + TMR_CER); + __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_PLCR(1)); /* free-running */ + __raw_writel(0x7, TIMERS_VIRT_BASE + TMR_ICR(1)); /* clear status */ + __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(1)); + + /* enable timer 1 counter */ + __raw_writel(0x2, TIMERS_VIRT_BASE + TMR_CER); } static struct irqaction timer_irq = { diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c index 7c893fa7026..68934ea8725 100644 --- a/arch/arm/mach-mx5/board-cpuimx51.c +++ b/arch/arm/mach-mx5/board-cpuimx51.c @@ -81,7 +81,7 @@ static struct plat_serial8250_port serial_platform_data[] = { .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, }, { .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000), - .irq = irq_to_gpio(CPUIMX51_QUARTD_GPIO), + .irq = gpio_to_irq(CPUIMX51_QUARTD_GPIO), .irqflags = IRQF_TRIGGER_HIGH, .uartclk = CPUIMX51_QUART_XTAL, .regshift = CPUIMX51_QUART_REGSHIFT, diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c index e400b09109c..11b0ff67f89 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-mx5/board-mx51_babbage.c @@ -369,7 +369,7 @@ static void __init mx51_babbage_init(void) ARRAY_SIZE(mx51babbage_pads)); imx51_add_imx_uart(0, &uart_pdata); - imx51_add_imx_uart(1, &uart_pdata); + imx51_add_imx_uart(1, NULL); imx51_add_imx_uart(2, &uart_pdata); babbage_fec_reset(); diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c index f70700dc0ec..551daf85ff8 100644 --- a/arch/arm/mach-mx5/board-mx51_efikamx.c +++ b/arch/arm/mach-mx5/board-mx51_efikamx.c @@ -108,9 +108,9 @@ static void __init mx51_efikamx_board_id(void) gpio_request(EFIKAMX_PCBID2, "pcbid2"); gpio_direction_input(EFIKAMX_PCBID2); - id = gpio_get_value(EFIKAMX_PCBID0); - id |= gpio_get_value(EFIKAMX_PCBID1) << 1; - id |= gpio_get_value(EFIKAMX_PCBID2) << 2; + id = gpio_get_value(EFIKAMX_PCBID0) ? 1 : 0; + id |= (gpio_get_value(EFIKAMX_PCBID1) ? 1 : 0) << 1; + id |= (gpio_get_value(EFIKAMX_PCBID2) ? 1 : 0) << 2; switch (id) { case 7: diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-mx5/board-mx51_efikasb.c index 2e4d9d32a87..8a9bca22beb 100644 --- a/arch/arm/mach-mx5/board-mx51_efikasb.c +++ b/arch/arm/mach-mx5/board-mx51_efikasb.c @@ -156,23 +156,24 @@ static struct gpio_keys_button mx51_efikasb_keys[] = { { .code = KEY_POWER, .gpio = EFIKASB_PWRKEY, - .type = EV_PWR, + .type = EV_KEY, .desc = "Power Button", .wakeup = 1, - .debounce_interval = 10, /* ms */ + .active_low = 1, }, { .code = SW_LID, .gpio = EFIKASB_LID, .type = EV_SW, .desc = "Lid Switch", + .active_low = 1, }, { - /* SW_RFKILLALL vs KEY_RFKILL ? */ - .code = SW_RFKILL_ALL, + .code = KEY_RFKILL, .gpio = EFIKASB_RFKILL, - .type = EV_SW, + .type = EV_KEY, .desc = "rfkill", + .active_low = 1, }, }; @@ -224,8 +225,8 @@ static void __init mx51_efikasb_board_id(void) gpio_request(EFIKASB_PCBID1, "pcb id1"); gpio_direction_input(EFIKASB_PCBID1); - id = gpio_get_value(EFIKASB_PCBID0); - id |= gpio_get_value(EFIKASB_PCBID1) << 1; + id = gpio_get_value(EFIKASB_PCBID0) ? 1 : 0; + id |= (gpio_get_value(EFIKASB_PCBID1) ? 1 : 0) << 1; switch (id) { default: diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c index 7f20308c4db..f7bf996f463 100644 --- a/arch/arm/mach-mx5/clock-mx51-mx53.c +++ b/arch/arm/mach-mx5/clock-mx51-mx53.c @@ -271,7 +271,11 @@ static int _clk_pll_enable(struct clk *clk) int i = 0; pllbase = _get_pll_base(clk); - reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) | MXC_PLL_DP_CTL_UPEN; + reg = __raw_readl(pllbase + MXC_PLL_DP_CTL); + if (reg & MXC_PLL_DP_CTL_UPEN) + return 0; + + reg |= MXC_PLL_DP_CTL_UPEN; __raw_writel(reg, pllbase + MXC_PLL_DP_CTL); /* Wait for lock */ diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-mx5/mx51_efika.c index 4435e03cea5..c9209454807 100644 --- a/arch/arm/mach-mx5/mx51_efika.c +++ b/arch/arm/mach-mx5/mx51_efika.c @@ -186,7 +186,7 @@ static int initialize_usbh1_port(struct platform_device *pdev) mdelay(10); - return mx51_initialize_usb_hw(0, MXC_EHCI_ITC_NO_THRESHOLD); + return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD); } static struct mxc_usbh_platform_data usbh1_config = { diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 4ae6257b39a..57b66d590c5 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -7,7 +7,6 @@ config ARCH_OMAP2PLUS_TYPICAL default y select AEABI select REGULATOR - select PM select PM_RUNTIME select VFP select NEON if ARCH_OMAP3 || ARCH_OMAP4 diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c index 5f2b55ff04f..933e9353cb3 100644 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -45,8 +45,6 @@ static struct omap_board_config_kernel am3517_crane_config[] __initdata = { static struct omap_board_mux board_mux[] __initdata = { { .reg_offset = OMAP_MUX_TERMINATOR }, }; -#else -#define board_mux NULL #endif static void __init am3517_crane_init_early(void) diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 32f5f895568..3ae16b4e3f5 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -491,23 +491,22 @@ static void __init beagle_opp_init(void) /* Custom OPP enabled for all xM versions */ if (cpu_is_omap3630()) { - struct omap_hwmod *mh = omap_hwmod_lookup("mpu"); - struct omap_hwmod *dh = omap_hwmod_lookup("iva"); - struct device *dev; + struct device *mpu_dev, *iva_dev; - if (!mh || !dh) { + mpu_dev = omap2_get_mpuss_device(); + iva_dev = omap2_get_iva_device(); + + if (!mpu_dev || !iva_dev) { pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n", - __func__, mh, dh); + __func__, mpu_dev, iva_dev); return; } /* Enable MPU 1GHz and lower opps */ - dev = &mh->od->pdev.dev; - r = opp_enable(dev, 800000000); + r = opp_enable(mpu_dev, 800000000); /* TODO: MPU 1GHz needs SR and ABB */ /* Enable IVA 800MHz and lower opps */ - dev = &dh->od->pdev.dev; - r |= opp_enable(dev, 660000000); + r |= opp_enable(iva_dev, 660000000); /* TODO: DSP 800MHz needs SR and ABB */ if (r) { pr_err("%s: failed to enable higher opp %d\n", @@ -516,10 +515,8 @@ static void __init beagle_opp_init(void) * Cleanup - disable the higher freqs - we dont care * about the results */ - dev = &mh->od->pdev.dev; - opp_disable(dev, 800000000); - dev = &dh->od->pdev.dev; - opp_disable(dev, 660000000); + opp_disable(mpu_dev, 800000000); + opp_disable(iva_dev, 660000000); } } return; diff --git a/arch/arm/mach-omap2/cminst44xx.h b/arch/arm/mach-omap2/cminst44xx.h index f2ea6453ade..a018a732787 100644 --- a/arch/arm/mach-omap2/cminst44xx.h +++ b/arch/arm/mach-omap2/cminst44xx.h @@ -18,13 +18,36 @@ extern void omap4_cminst_clkdm_force_sleep(u8 part, s16 inst, u16 cdoffs); extern void omap4_cminst_clkdm_force_wakeup(u8 part, s16 inst, u16 cdoffs); extern int omap4_cminst_wait_module_ready(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs); -extern int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs); + +# ifdef CONFIG_ARCH_OMAP4 +extern int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, + u16 clkctrl_offs); extern void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs); extern void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs); +# else + +static inline int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, + u16 clkctrl_offs) +{ + return 0; +} + +static inline void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, + s16 cdoffs, u16 clkctrl_offs) +{ +} + +static inline void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs, + u16 clkctrl_offs) +{ +} + +# endif + /* * In an ideal world, we would not export these low-level functions, * but this will probably take some time to fix properly diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index c7fb22abc21..655e9480eb9 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -821,11 +821,10 @@ static void __init omap_mux_set_cmdline_signals(void) if (!omap_mux_options) return; - options = kmalloc(strlen(omap_mux_options) + 1, GFP_KERNEL); + options = kstrdup(omap_mux_options, GFP_KERNEL); if (!options) return; - strcpy(options, omap_mux_options); next_opt = options; while ((token = strsep(&next_opt, ",")) != NULL) { @@ -855,24 +854,19 @@ static int __init omap_mux_copy_names(struct omap_mux *src, for (i = 0; i < OMAP_MUX_NR_MODES; i++) { if (src->muxnames[i]) { - dst->muxnames[i] = - kmalloc(strlen(src->muxnames[i]) + 1, - GFP_KERNEL); + dst->muxnames[i] = kstrdup(src->muxnames[i], + GFP_KERNEL); if (!dst->muxnames[i]) goto free; - strcpy(dst->muxnames[i], src->muxnames[i]); } } #ifdef CONFIG_DEBUG_FS for (i = 0; i < OMAP_MUX_NR_SIDES; i++) { if (src->balls[i]) { - dst->balls[i] = - kmalloc(strlen(src->balls[i]) + 1, - GFP_KERNEL); + dst->balls[i] = kstrdup(src->balls[i], GFP_KERNEL); if (!dst->balls[i]) goto free; - strcpy(dst->balls[i], src->balls[i]); } } #endif diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index 2ce2fb7664b..34c01a7de81 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -621,7 +621,7 @@ void sr_disable(struct voltagedomain *voltdm) sr_v2_disable(sr); } - pm_runtime_put_sync(&sr->pdev->dev); + pm_runtime_put_sync_suspend(&sr->pdev->dev); } /** @@ -860,6 +860,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); pm_runtime_enable(&pdev->dev); + pm_runtime_irq_safe(&pdev->dev); sr_info->pdev = pdev; sr_info->srid = pdev->id; diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index e9640728239..cf1de7d2630 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -293,7 +293,8 @@ static void __init omap2_gp_clocksource_init(int gptimer_id, pr_info("OMAP clocksource: GPTIMER%d at %lu Hz\n", gptimer_id, clksrc.rate); - __omap_dm_timer_load_start(clksrc.io_base, OMAP_TIMER_CTRL_ST, 0, 1); + __omap_dm_timer_load_start(clksrc.io_base, + OMAP_TIMER_CTRL_ST | OMAP_TIMER_CTRL_AR, 0, 1); init_sched_clock(&cd, dmtimer_update_sched_clock, 32, clksrc.rate); if (clocksource_register_hz(&clocksource_gpt, clksrc.rate)) diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 2543342dbcc..daa056ed873 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -48,14 +48,7 @@ void __init omap_pmic_init(int bus, u32 clkrate, omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1); } -static struct twl4030_usb_data omap4_usb_pdata = { - .phy_init = omap4430_phy_init, - .phy_exit = omap4430_phy_exit, - .phy_power = omap4430_phy_power, - .phy_set_clock = omap4430_phy_set_clk, - .phy_suspend = omap4430_phy_suspend, -}; - +#if defined(CONFIG_ARCH_OMAP3) static struct twl4030_usb_data omap3_usb_pdata = { .usb_mode = T2_USB_MODE_ULPI, }; @@ -122,6 +115,45 @@ static struct regulator_init_data omap3_vpll2_idata = { .consumer_supplies = omap3_vpll2_supplies, }; +void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data, + u32 pdata_flags, u32 regulators_flags) +{ + if (!pmic_data->irq_base) + pmic_data->irq_base = TWL4030_IRQ_BASE; + if (!pmic_data->irq_end) + pmic_data->irq_end = TWL4030_IRQ_END; + + /* Common platform data configurations */ + if (pdata_flags & TWL_COMMON_PDATA_USB && !pmic_data->usb) + pmic_data->usb = &omap3_usb_pdata; + + if (pdata_flags & TWL_COMMON_PDATA_BCI && !pmic_data->bci) + pmic_data->bci = &omap3_bci_pdata; + + if (pdata_flags & TWL_COMMON_PDATA_MADC && !pmic_data->madc) + pmic_data->madc = &omap3_madc_pdata; + + if (pdata_flags & TWL_COMMON_PDATA_AUDIO && !pmic_data->audio) + pmic_data->audio = &omap3_audio_pdata; + + /* Common regulator configurations */ + if (regulators_flags & TWL_COMMON_REGULATOR_VDAC && !pmic_data->vdac) + pmic_data->vdac = &omap3_vdac_idata; + + if (regulators_flags & TWL_COMMON_REGULATOR_VPLL2 && !pmic_data->vpll2) + pmic_data->vpll2 = &omap3_vpll2_idata; +} +#endif /* CONFIG_ARCH_OMAP3 */ + +#if defined(CONFIG_ARCH_OMAP4) +static struct twl4030_usb_data omap4_usb_pdata = { + .phy_init = omap4430_phy_init, + .phy_exit = omap4430_phy_exit, + .phy_power = omap4430_phy_power, + .phy_set_clock = omap4430_phy_set_clk, + .phy_suspend = omap4430_phy_suspend, +}; + static struct regulator_init_data omap4_vdac_idata = { .constraints = { .min_uV = 1800000, @@ -273,32 +305,4 @@ void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data, !pmic_data->clk32kg) pmic_data->clk32kg = &omap4_clk32kg_idata; } - -void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data, - u32 pdata_flags, u32 regulators_flags) -{ - if (!pmic_data->irq_base) - pmic_data->irq_base = TWL4030_IRQ_BASE; - if (!pmic_data->irq_end) - pmic_data->irq_end = TWL4030_IRQ_END; - - /* Common platform data configurations */ - if (pdata_flags & TWL_COMMON_PDATA_USB && !pmic_data->usb) - pmic_data->usb = &omap3_usb_pdata; - - if (pdata_flags & TWL_COMMON_PDATA_BCI && !pmic_data->bci) - pmic_data->bci = &omap3_bci_pdata; - - if (pdata_flags & TWL_COMMON_PDATA_MADC && !pmic_data->madc) - pmic_data->madc = &omap3_madc_pdata; - - if (pdata_flags & TWL_COMMON_PDATA_AUDIO && !pmic_data->audio) - pmic_data->audio = &omap3_audio_pdata; - - /* Common regulator configurations */ - if (regulators_flags & TWL_COMMON_REGULATOR_VDAC && !pmic_data->vdac) - pmic_data->vdac = &omap3_vdac_idata; - - if (regulators_flags & TWL_COMMON_REGULATOR_VPLL2 && !pmic_data->vpll2) - pmic_data->vpll2 = &omap3_vpll2_idata; -} +#endif /* CONFIG_ARCH_OMAP4 */ diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index 9026249233a..af0c2fe1ea3 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -65,7 +65,7 @@ #include <plat/iic.h> #include <plat/pm.h> -#include <sound/wm8915.h> +#include <sound/wm8996.h> #include <sound/wm8962.h> #include <sound/wm9081.h> @@ -614,7 +614,7 @@ static struct wm831x_pdata glenfarclas_pmic_pdata __initdata = { .disable_touch = true, }; -static struct wm8915_retune_mobile_config wm8915_retune[] = { +static struct wm8996_retune_mobile_config wm8996_retune[] = { { .name = "Sub LPF", .rate = 48000, @@ -635,12 +635,12 @@ static struct wm8915_retune_mobile_config wm8915_retune[] = { }, }; -static struct wm8915_pdata wm8915_pdata __initdata = { +static struct wm8996_pdata wm8996_pdata __initdata = { .ldo_ena = S3C64XX_GPN(7), .gpio_base = CODEC_GPIO_BASE, .micdet_def = 1, - .inl_mode = WM8915_DIFFERRENTIAL_1, - .inr_mode = WM8915_DIFFERRENTIAL_1, + .inl_mode = WM8996_DIFFERRENTIAL_1, + .inr_mode = WM8996_DIFFERRENTIAL_1, .irq_flags = IRQF_TRIGGER_RISING, @@ -652,8 +652,8 @@ static struct wm8915_pdata wm8915_pdata __initdata = { 0x020e, /* GPIO5 == CLKOUT */ }, - .retune_mobile_cfgs = wm8915_retune, - .num_retune_mobile_cfgs = ARRAY_SIZE(wm8915_retune), + .retune_mobile_cfgs = wm8996_retune, + .num_retune_mobile_cfgs = ARRAY_SIZE(wm8996_retune), }; static struct wm8962_pdata wm8962_pdata __initdata = { @@ -679,8 +679,8 @@ static struct i2c_board_info i2c_devs1[] __initdata = { .platform_data = &glenfarclas_pmic_pdata }, { I2C_BOARD_INFO("wm1250-ev1", 0x27) }, - { I2C_BOARD_INFO("wm8915", 0x1a), - .platform_data = &wm8915_pdata, + { I2C_BOARD_INFO("wm8996", 0x1a), + .platform_data = &wm8996_pdata, .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, }, { I2C_BOARD_INFO("wm9081", 0x6c), diff --git a/arch/arm/mach-sa1100/pci-nanoengine.c b/arch/arm/mach-sa1100/pci-nanoengine.c index 964c6c3cd7a..dd39fee5954 100644 --- a/arch/arm/mach-sa1100/pci-nanoengine.c +++ b/arch/arm/mach-sa1100/pci-nanoengine.c @@ -28,6 +28,7 @@ #include <asm/mach-types.h> #include <mach/nanoengine.h> +#include <mach/hardware.h> static DEFINE_SPINLOCK(nano_lock); diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index be7c638b648..cfbcf8b9559 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -22,6 +22,7 @@ #include <linux/sched.h> #include <linux/uaccess.h> +#include <asm/system.h> #include <asm/unaligned.h> #include "fault.h" @@ -95,6 +96,33 @@ static const char *usermode_action[] = { "signal+warn" }; +/* Return true if and only if the ARMv6 unaligned access model is in use. */ +static bool cpu_is_v6_unaligned(void) +{ + return cpu_architecture() >= CPU_ARCH_ARMv6 && (cr_alignment & CR_U); +} + +static int safe_usermode(int new_usermode, bool warn) +{ + /* + * ARMv6 and later CPUs can perform unaligned accesses for + * most single load and store instructions up to word size. + * LDM, STM, LDRD and STRD still need to be handled. + * + * Ignoring the alignment fault is not an option on these + * CPUs since we spin re-faulting the instruction without + * making any progress. + */ + if (cpu_is_v6_unaligned() && !(new_usermode & (UM_FIXUP | UM_SIGNAL))) { + new_usermode |= UM_FIXUP; + + if (warn) + printk(KERN_WARNING "alignment: ignoring faults is unsafe on this CPU. Defaulting to fixup mode.\n"); + } + + return new_usermode; +} + static int alignment_proc_show(struct seq_file *m, void *v) { seq_printf(m, "User:\t\t%lu\n", ai_user); @@ -125,7 +153,7 @@ static ssize_t alignment_proc_write(struct file *file, const char __user *buffer if (get_user(mode, buffer)) return -EFAULT; if (mode >= '0' && mode <= '5') - ai_usermode = mode - '0'; + ai_usermode = safe_usermode(mode - '0', true); } return count; } @@ -886,9 +914,16 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) if (ai_usermode & UM_FIXUP) goto fixup; - if (ai_usermode & UM_SIGNAL) - force_sig(SIGBUS, current); - else { + if (ai_usermode & UM_SIGNAL) { + siginfo_t si; + + si.si_signo = SIGBUS; + si.si_errno = 0; + si.si_code = BUS_ADRALN; + si.si_addr = (void __user *)addr; + + force_sig_info(si.si_signo, &si, current); + } else { /* * We're about to disable the alignment trap and return to * user space. But if an interrupt occurs before actually @@ -926,20 +961,11 @@ static int __init alignment_init(void) return -ENOMEM; #endif - /* - * ARMv6 and later CPUs can perform unaligned accesses for - * most single load and store instructions up to word size. - * LDM, STM, LDRD and STRD still need to be handled. - * - * Ignoring the alignment fault is not an option on these - * CPUs since we spin re-faulting the instruction without - * making any progress. - */ - if (cpu_architecture() >= CPU_ARCH_ARMv6 && (cr_alignment & CR_U)) { + if (cpu_is_v6_unaligned()) { cr_alignment &= ~CR_A; cr_no_alignment &= ~CR_A; set_cr(cr_alignment); - ai_usermode = UM_FIXUP; + ai_usermode = safe_usermode(ai_usermode, false); } hook_fault_code(1, do_alignment, SIGBUS, BUS_ADRALN, diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 2fee782077c..91bca355cd3 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -441,7 +441,7 @@ static inline int free_area(unsigned long pfn, unsigned long end, char *s) static inline void poison_init_mem(void *s, size_t count) { u32 *p = (u32 *)s; - while ((count = count - 4)) + for (; count != 0; count -= 4) *p++ = 0xe7fddef0; } diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S index f8f7ea34bfc..683af3a182b 100644 --- a/arch/arm/mm/proc-arm946.S +++ b/arch/arm/mm/proc-arm946.S @@ -410,6 +410,7 @@ __arm946_proc_info: .long 0x41009460 .long 0xff00fff0 .long 0 + .long 0 b __arm946_setup .long cpu_arch_name .long cpu_elf_name @@ -418,6 +419,6 @@ __arm946_proc_info: .long arm946_processor_functions .long 0 .long 0 - .long arm940_cache_fns + .long arm946_cache_fns .size __arm946_proc_info, . - __arm946_proc_info diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S index 91fc7cdb5dc..e4dde91f023 100644 --- a/arch/arm/plat-mxc/include/mach/debug-macro.S +++ b/arch/arm/plat-mxc/include/mach/debug-macro.S @@ -44,6 +44,14 @@ #define UART_PADDR MX51_UART1_BASE_ADDR #endif +/* iMX50/53 have same addresses, but not iMX51 */ +#if defined(CONFIG_SOC_IMX50) || defined(CONFIG_SOC_IMX53) +#ifdef UART_PADDR +#error "CONFIG_DEBUG_LL is incompatible with multiple archs" +#endif +#define UART_PADDR MX53_UART1_BASE_ADDR +#endif + #define UART_VADDR IMX_IO_ADDRESS(UART_PADDR) .macro addruart, rp, rv diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx53.h b/arch/arm/plat-mxc/include/mach/iomux-mx53.h index 9440b9e00e8..5408fd1fc73 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx53.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx53.h @@ -30,6 +30,9 @@ #define MX53_SDHC_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \ PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_HIGH | \ PAD_CTL_SRE_FAST) +#define PAD_CTRL_I2C (PAD_CTL_SRE_FAST | PAD_CTL_ODE | PAD_CTL_PKE | \ + PAD_CTL_PUE | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP \ + | PAD_CTL_HYS) #define _MX53_PAD_GPIO_19__KPP_COL_5 IOMUX_PAD(0x348, 0x20, 0, 0x840, 0, 0) #define _MX53_PAD_GPIO_19__GPIO4_5 IOMUX_PAD(0x348, 0x20, 1, 0x0, 0, 0) @@ -1256,7 +1259,7 @@ #define MX53_PAD_KEY_COL3__GPIO4_12 (_MX53_PAD_KEY_COL3__GPIO4_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_COL3__USBOH3_H2_DP (_MX53_PAD_KEY_COL3__USBOH3_H2_DP | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_COL3__SPDIF_IN1 (_MX53_PAD_KEY_COL3__SPDIF_IN1 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_KEY_COL3__I2C2_SCL (_MX53_PAD_KEY_COL3__I2C2_SCL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL3__I2C2_SCL (_MX53_PAD_KEY_COL3__I2C2_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_KEY_COL3__ECSPI1_SS3 (_MX53_PAD_KEY_COL3__ECSPI1_SS3 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_COL3__FEC_CRS (_MX53_PAD_KEY_COL3__FEC_CRS | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK (_MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1264,7 +1267,7 @@ #define MX53_PAD_KEY_ROW3__GPIO4_13 (_MX53_PAD_KEY_ROW3__GPIO4_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_ROW3__USBOH3_H2_DM (_MX53_PAD_KEY_ROW3__USBOH3_H2_DM | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK (_MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_KEY_ROW3__I2C2_SDA (_MX53_PAD_KEY_ROW3__I2C2_SDA | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW3__I2C2_SDA (_MX53_PAD_KEY_ROW3__I2C2_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_KEY_ROW3__OSC32K_32K_OUT (_MX53_PAD_KEY_ROW3__OSC32K_32K_OUT | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_ROW3__CCM_PLL4_BYP (_MX53_PAD_KEY_ROW3__CCM_PLL4_BYP | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0 (_MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1536,7 +1539,7 @@ #define MX53_PAD_CSI0_DAT8__KPP_COL_7 (_MX53_PAD_CSI0_DAT8__KPP_COL_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT8__ECSPI2_SCLK (_MX53_PAD_CSI0_DAT8__ECSPI2_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC (_MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_CSI0_DAT8__I2C1_SDA (_MX53_PAD_CSI0_DAT8__I2C1_SDA | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT8__I2C1_SDA (_MX53_PAD_CSI0_DAT8__I2C1_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37 (_MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT8__TPIU_TRACE_5 (_MX53_PAD_CSI0_DAT8__TPIU_TRACE_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 (_MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1544,7 +1547,7 @@ #define MX53_PAD_CSI0_DAT9__KPP_ROW_7 (_MX53_PAD_CSI0_DAT9__KPP_ROW_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT9__ECSPI2_MOSI (_MX53_PAD_CSI0_DAT9__ECSPI2_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR (_MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_CSI0_DAT9__I2C1_SCL (_MX53_PAD_CSI0_DAT9__I2C1_SCL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT9__I2C1_SCL (_MX53_PAD_CSI0_DAT9__I2C1_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38 (_MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT9__TPIU_TRACE_6 (_MX53_PAD_CSI0_DAT9__TPIU_TRACE_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 (_MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1631,25 +1634,25 @@ #define MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK (_MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS (_MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_EB2__ECSPI1_SS0 (_MX53_PAD_EIM_EB2__ECSPI1_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_EB2__I2C2_SCL (_MX53_PAD_EIM_EB2__I2C2_SCL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB2__I2C2_SCL (_MX53_PAD_EIM_EB2__I2C2_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_EIM_D16__EMI_WEIM_D_16 (_MX53_PAD_EIM_D16__EMI_WEIM_D_16 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D16__GPIO3_16 (_MX53_PAD_EIM_D16__GPIO3_16 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D16__IPU_DI0_PIN5 (_MX53_PAD_EIM_D16__IPU_DI0_PIN5 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK (_MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D16__ECSPI1_SCLK (_MX53_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_D16__I2C2_SDA (_MX53_PAD_EIM_D16__I2C2_SDA | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D16__I2C2_SDA (_MX53_PAD_EIM_D16__I2C2_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_EIM_D17__EMI_WEIM_D_17 (_MX53_PAD_EIM_D17__EMI_WEIM_D_17 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D17__GPIO3_17 (_MX53_PAD_EIM_D17__GPIO3_17 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D17__IPU_DI0_PIN6 (_MX53_PAD_EIM_D17__IPU_DI0_PIN6 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN (_MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D17__ECSPI1_MISO (_MX53_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_D17__I2C3_SCL (_MX53_PAD_EIM_D17__I2C3_SCL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D17__I2C3_SCL (_MX53_PAD_EIM_D17__I2C3_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_EIM_D18__EMI_WEIM_D_18 (_MX53_PAD_EIM_D18__EMI_WEIM_D_18 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D18__GPIO3_18 (_MX53_PAD_EIM_D18__GPIO3_18 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D18__IPU_DI0_PIN7 (_MX53_PAD_EIM_D18__IPU_DI0_PIN7 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO (_MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D18__ECSPI1_MOSI (_MX53_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_D18__I2C3_SDA (_MX53_PAD_EIM_D18__I2C3_SDA | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D18__I2C3_SDA (_MX53_PAD_EIM_D18__I2C3_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_EIM_D18__IPU_DI1_D0_CS (_MX53_PAD_EIM_D18__IPU_DI1_D0_CS | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D19__EMI_WEIM_D_19 (_MX53_PAD_EIM_D19__EMI_WEIM_D_19 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D19__GPIO3_19 (_MX53_PAD_EIM_D19__GPIO3_19 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1672,7 +1675,7 @@ #define MX53_PAD_EIM_D21__IPU_DI0_PIN17 (_MX53_PAD_EIM_D21__IPU_DI0_PIN17 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK (_MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D21__CSPI_SCLK (_MX53_PAD_EIM_D21__CSPI_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_D21__I2C1_SCL (_MX53_PAD_EIM_D21__I2C1_SCL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D21__I2C1_SCL (_MX53_PAD_EIM_D21__I2C1_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_EIM_D21__USBOH3_USBOTG_OC (_MX53_PAD_EIM_D21__USBOH3_USBOTG_OC | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D22__EMI_WEIM_D_22 (_MX53_PAD_EIM_D22__EMI_WEIM_D_22 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D22__GPIO3_22 (_MX53_PAD_EIM_D22__GPIO3_22 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1732,7 +1735,7 @@ #define MX53_PAD_EIM_D28__UART2_CTS (_MX53_PAD_EIM_D28__UART2_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO (_MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D28__CSPI_MOSI (_MX53_PAD_EIM_D28__CSPI_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_D28__I2C1_SDA (_MX53_PAD_EIM_D28__I2C1_SDA | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D28__I2C1_SDA (_MX53_PAD_EIM_D28__I2C1_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_EIM_D28__IPU_EXT_TRIG (_MX53_PAD_EIM_D28__IPU_EXT_TRIG | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D28__IPU_DI0_PIN13 (_MX53_PAD_EIM_D28__IPU_DI0_PIN13 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D29__EMI_WEIM_D_29 (_MX53_PAD_EIM_D29__EMI_WEIM_D_29 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -2297,7 +2300,7 @@ #define MX53_PAD_GPIO_9__SCC_FAIL_STATE (_MX53_PAD_GPIO_9__SCC_FAIL_STATE | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_3__ESAI1_HCKR (_MX53_PAD_GPIO_3__ESAI1_HCKR | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_3__GPIO1_3 (_MX53_PAD_GPIO_3__GPIO1_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_GPIO_3__I2C3_SCL (_MX53_PAD_GPIO_3__I2C3_SCL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_3__I2C3_SCL (_MX53_PAD_GPIO_3__I2C3_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_GPIO_3__DPLLIP1_TOG_EN (_MX53_PAD_GPIO_3__DPLLIP1_TOG_EN | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_3__CCM_CLKO2 (_MX53_PAD_GPIO_3__CCM_CLKO2 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0 (_MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -2305,7 +2308,7 @@ #define MX53_PAD_GPIO_3__MLB_MLBCLK (_MX53_PAD_GPIO_3__MLB_MLBCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_6__ESAI1_SCKT (_MX53_PAD_GPIO_6__ESAI1_SCKT | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_6__GPIO1_6 (_MX53_PAD_GPIO_6__GPIO1_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_GPIO_6__I2C3_SDA (_MX53_PAD_GPIO_6__I2C3_SDA | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_6__I2C3_SDA (_MX53_PAD_GPIO_6__I2C3_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_GPIO_6__CCM_CCM_OUT_0 (_MX53_PAD_GPIO_6__CCM_CCM_OUT_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_6__CSU_CSU_INT_DEB (_MX53_PAD_GPIO_6__CSU_CSU_INT_DEB | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1 (_MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -2333,7 +2336,7 @@ #define MX53_PAD_GPIO_5__CCM_CLKO (_MX53_PAD_GPIO_5__CCM_CLKO | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 (_MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4 (_MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_GPIO_5__I2C3_SCL (_MX53_PAD_GPIO_5__I2C3_SCL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_5__I2C3_SCL (_MX53_PAD_GPIO_5__I2C3_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_GPIO_5__CCM_PLL1_BYP (_MX53_PAD_GPIO_5__CCM_PLL1_BYP | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_7__ESAI1_TX4_RX1 (_MX53_PAD_GPIO_7__ESAI1_TX4_RX1 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_7__GPIO1_7 (_MX53_PAD_GPIO_7__GPIO1_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -2356,7 +2359,7 @@ #define MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT (_MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1 (_MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_16__SPDIF_IN1 (_MX53_PAD_GPIO_16__SPDIF_IN1 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_GPIO_16__I2C3_SDA (_MX53_PAD_GPIO_16__I2C3_SDA | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_16__I2C3_SDA (_MX53_PAD_GPIO_16__I2C3_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_GPIO_16__SJC_DE_B (_MX53_PAD_GPIO_16__SJC_DE_B | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_17__ESAI1_TX0 (_MX53_PAD_GPIO_17__ESAI1_TX0 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_17__GPIO7_12 (_MX53_PAD_GPIO_17__GPIO7_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index 6e6735f04ee..bb8f4a6b3e3 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -13,6 +13,7 @@ config ARCH_OMAP1 bool "TI OMAP1" select CLKDEV_LOOKUP select CLKSRC_MMIO + select GENERIC_IRQ_CHIP help "Systems based on omap7xx, omap15xx or omap16xx" diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h index d1c916fcf77..dc562a5c0a8 100644 --- a/arch/arm/plat-omap/include/plat/dma.h +++ b/arch/arm/plat-omap/include/plat/dma.h @@ -195,6 +195,11 @@ #define OMAP36XX_DMA_UART4_TX 81 /* S_DMA_80 */ #define OMAP36XX_DMA_UART4_RX 82 /* S_DMA_81 */ + +/* Only for AM35xx */ +#define AM35XX_DMA_UART4_TX 54 +#define AM35XX_DMA_UART4_RX 55 + /*----------------------------------------------------------------------------*/ #define OMAP1_DMA_TOUT_IRQ (1 << 0) diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h index 926d25c780f..30e10719b77 100644 --- a/arch/arm/plat-omap/include/plat/irqs.h +++ b/arch/arm/plat-omap/include/plat/irqs.h @@ -357,6 +357,7 @@ #define INT_35XX_EMAC_C0_TX_PULSE_IRQ 69 #define INT_35XX_EMAC_C0_MISC_PULSE_IRQ 70 #define INT_35XX_USBOTG_IRQ 71 +#define INT_35XX_UART4 84 #define INT_35XX_CCDC_VD0_IRQ 88 #define INT_35XX_CCDC_VD1_IRQ 92 #define INT_35XX_CCDC_VD2_IRQ 93 diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h index 2723f9166ea..de3b10c1812 100644 --- a/arch/arm/plat-omap/include/plat/serial.h +++ b/arch/arm/plat-omap/include/plat/serial.h @@ -56,6 +56,9 @@ #define TI816X_UART2_BASE 0x48022000 #define TI816X_UART3_BASE 0x48024000 +/* AM3505/3517 UART4 */ +#define AM35XX_UART4_BASE 0x4809E000 /* Only on AM3505/3517 */ + /* External port on Zoom2/3 */ #define ZOOM_UART_BASE 0x10000000 #define ZOOM_UART_VIRT 0xfa400000 diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c index c60737c49a3..79e7fedb860 100644 --- a/arch/arm/plat-omap/iovmm.c +++ b/arch/arm/plat-omap/iovmm.c @@ -423,9 +423,6 @@ static void sgtable_fill_kmalloc(struct sg_table *sgt, u32 pa, u32 da, { unsigned int i; struct scatterlist *sg; - void *va; - - va = phys_to_virt(pa); for_each_sg(sgt->sgl, sg, sgt->nents, i) { unsigned bytes; diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 3b3776d0a1a..fff68d0d521 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -910,7 +910,7 @@ omapl138_case_a3 MACH_OMAPL138_CASE_A3 OMAPL138_CASE_A3 3280 uemd MACH_UEMD UEMD 3281 ccwmx51mut MACH_CCWMX51MUT CCWMX51MUT 3282 rockhopper MACH_ROCKHOPPER ROCKHOPPER 3283 -nookcolor MACH_NOOKCOLOR NOOKCOLOR 3284 +encore MACH_ENCORE ENCORE 3284 hkdkc100 MACH_HKDKC100 HKDKC100 3285 ts42xx MACH_TS42XX TS42XX 3286 aebl MACH_AEBL AEBL 3287 diff --git a/arch/powerpc/include/asm/jump_label.h b/arch/powerpc/include/asm/jump_label.h index 1f780b95c0f..938986e412f 100644 --- a/arch/powerpc/include/asm/jump_label.h +++ b/arch/powerpc/include/asm/jump_label.h @@ -22,7 +22,6 @@ static __always_inline bool arch_static_branch(struct jump_label_key *key) asm goto("1:\n\t" "nop\n\t" ".pushsection __jump_table, \"aw\"\n\t" - ".align 4\n\t" JUMP_ENTRY_TYPE "1b, %l[l_yes], %c0\n\t" ".popsection \n\t" : : "i" (key) : : l_yes); @@ -41,7 +40,6 @@ struct jump_entry { jump_label_t code; jump_label_t target; jump_label_t key; - jump_label_t pad; }; #endif /* _ASM_POWERPC_JUMP_LABEL_H */ diff --git a/arch/powerpc/include/asm/kdump.h b/arch/powerpc/include/asm/kdump.h index 6857af58b02..bffd062adf7 100644 --- a/arch/powerpc/include/asm/kdump.h +++ b/arch/powerpc/include/asm/kdump.h @@ -3,17 +3,7 @@ #include <asm/page.h> -/* - * If CONFIG_RELOCATABLE is enabled we can place the kdump kernel anywhere. - * To keep enough space in the RMO for the first stage kernel on 64bit, we - * place it at 64MB. If CONFIG_RELOCATABLE is not enabled we must place - * the second stage at 32MB. - */ -#if defined(CONFIG_RELOCATABLE) && defined(CONFIG_PPC64) -#define KDUMP_KERNELBASE 0x4000000 -#else #define KDUMP_KERNELBASE 0x2000000 -#endif /* How many bytes to reserve at zero for kdump. The reserve limit should * be greater or equal to the trampoline's end address. diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index e8aaf6fce38..559da199edb 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -1003,7 +1003,6 @@ #define PV_970 0x0039 #define PV_POWER5 0x003A #define PV_POWER5p 0x003B -#define PV_POWER7 0x003F #define PV_970FX 0x003C #define PV_POWER6 0x003E #define PV_POWER7 0x003F @@ -1024,13 +1023,16 @@ #define mtmsrd(v) __mtmsrd((v), 0) #define mtmsr(v) mtmsrd(v) #else -#define mtmsr(v) asm volatile("mtmsr %0" : : "r" (v) : "memory") +#define mtmsr(v) asm volatile("mtmsr %0" : \ + : "r" ((unsigned long)(v)) \ + : "memory") #endif #define mfspr(rn) ({unsigned long rval; \ asm volatile("mfspr %0," __stringify(rn) \ : "=r" (rval)); rval;}) -#define mtspr(rn, v) asm volatile("mtspr " __stringify(rn) ",%0" : : "r" (v)\ +#define mtspr(rn, v) asm volatile("mtspr " __stringify(rn) ",%0" : \ + : "r" ((unsigned long)(v)) \ : "memory") #ifdef __powerpc64__ diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 9fb933248ab..fa44ff53886 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -2051,7 +2051,8 @@ static struct cpu_spec __initdata cpu_specs[] = { static struct cpu_spec the_cpu_spec; -static void __init setup_cpu_spec(unsigned long offset, struct cpu_spec *s) +static struct cpu_spec * __init setup_cpu_spec(unsigned long offset, + struct cpu_spec *s) { struct cpu_spec *t = &the_cpu_spec; struct cpu_spec old; @@ -2114,6 +2115,8 @@ static void __init setup_cpu_spec(unsigned long offset, struct cpu_spec *s) t->cpu_setup(offset, t); } #endif /* CONFIG_PPC64 || CONFIG_BOOKE */ + + return t; } struct cpu_spec * __init identify_cpu(unsigned long offset, unsigned int pvr) @@ -2124,10 +2127,8 @@ struct cpu_spec * __init identify_cpu(unsigned long offset, unsigned int pvr) s = PTRRELOC(s); for (i = 0; i < ARRAY_SIZE(cpu_specs); i++,s++) { - if ((pvr & s->pvr_mask) == s->pvr_value) { - setup_cpu_spec(offset, s); - return s; - } + if ((pvr & s->pvr_mask) == s->pvr_value) + return setup_cpu_spec(offset, s); } BUG(); diff --git a/arch/powerpc/kernel/iomap.c b/arch/powerpc/kernel/iomap.c index 1577434f408..b25f6325fc7 100644 --- a/arch/powerpc/kernel/iomap.c +++ b/arch/powerpc/kernel/iomap.c @@ -117,6 +117,7 @@ void ioport_unmap(void __iomem *addr) EXPORT_SYMBOL(ioport_map); EXPORT_SYMBOL(ioport_unmap); +#ifdef CONFIG_PCI void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max) { resource_size_t start = pci_resource_start(dev, bar); @@ -146,3 +147,4 @@ void pci_iounmap(struct pci_dev *dev, void __iomem *addr) EXPORT_SYMBOL(pci_iomap); EXPORT_SYMBOL(pci_iounmap); +#endif /* CONFIG_PCI */ diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c index 6658a158995..9ce1672afb5 100644 --- a/arch/powerpc/kernel/machine_kexec.c +++ b/arch/powerpc/kernel/machine_kexec.c @@ -136,12 +136,16 @@ void __init reserve_crashkernel(void) crashk_res.start = KDUMP_KERNELBASE; #else if (!crashk_res.start) { +#ifdef CONFIG_PPC64 /* - * unspecified address, choose a region of specified size - * can overlap with initrd (ignoring corruption when retained) - * ppc64 requires kernel and some stacks to be in first segemnt + * On 64bit we split the RMO in half but cap it at half of + * a small SLB (128MB) since the crash kernel needs to place + * itself and some stacks to be in the first segment. */ + crashk_res.start = min(0x80000000ULL, (ppc64_rma_size / 2)); +#else crashk_res.start = KDUMP_KERNELBASE; +#endif } crash_base = PAGE_ALIGN(crashk_res.start); diff --git a/arch/powerpc/kernel/perf_callchain.c b/arch/powerpc/kernel/perf_callchain.c index d05ae4204bb..564c1d8bdb5 100644 --- a/arch/powerpc/kernel/perf_callchain.c +++ b/arch/powerpc/kernel/perf_callchain.c @@ -154,8 +154,12 @@ static int read_user_stack_64(unsigned long __user *ptr, unsigned long *ret) ((unsigned long)ptr & 7)) return -EFAULT; - if (!__get_user_inatomic(*ret, ptr)) + pagefault_disable(); + if (!__get_user_inatomic(*ret, ptr)) { + pagefault_enable(); return 0; + } + pagefault_enable(); return read_user_stack_slow(ptr, ret, 8); } @@ -166,8 +170,12 @@ static int read_user_stack_32(unsigned int __user *ptr, unsigned int *ret) ((unsigned long)ptr & 3)) return -EFAULT; - if (!__get_user_inatomic(*ret, ptr)) + pagefault_disable(); + if (!__get_user_inatomic(*ret, ptr)) { + pagefault_enable(); return 0; + } + pagefault_enable(); return read_user_stack_slow(ptr, ret, 4); } @@ -294,11 +302,17 @@ static inline int current_is_64bit(void) */ static int read_user_stack_32(unsigned int __user *ptr, unsigned int *ret) { + int rc; + if ((unsigned long)ptr > TASK_SIZE - sizeof(unsigned int) || ((unsigned long)ptr & 3)) return -EFAULT; - return __get_user_inatomic(*ret, ptr); + pagefault_disable(); + rc = __get_user_inatomic(*ret, ptr); + pagefault_enable(); + + return rc; } static inline void perf_callchain_user_64(struct perf_callchain_entry *entry, diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index c016033ba78..a909f4e9343 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -1020,7 +1020,7 @@ static unsigned long __init alloc_up(unsigned long size, unsigned long align) } if (addr == 0) return 0; - RELOC(alloc_bottom) = addr; + RELOC(alloc_bottom) = addr + size; prom_debug(" -> %x\n", addr); prom_debug(" alloc_bottom : %x\n", RELOC(alloc_bottom)); @@ -1830,11 +1830,13 @@ static void __init *make_room(unsigned long *mem_start, unsigned long *mem_end, if (room > DEVTREE_CHUNK_SIZE) room = DEVTREE_CHUNK_SIZE; if (room < PAGE_SIZE) - prom_panic("No memory for flatten_device_tree (no room)"); + prom_panic("No memory for flatten_device_tree " + "(no room)\n"); chunk = alloc_up(room, 0); if (chunk == 0) - prom_panic("No memory for flatten_device_tree (claim failed)"); - *mem_end = RELOC(alloc_top); + prom_panic("No memory for flatten_device_tree " + "(claim failed)\n"); + *mem_end = chunk + room; } ret = (void *)*mem_start; @@ -2042,7 +2044,7 @@ static void __init flatten_device_tree(void) /* * Check how much room we have between alloc top & bottom (+/- a - * few pages), crop to 4Mb, as this is our "chuck" size + * few pages), crop to 1MB, as this is our "chunk" size */ room = RELOC(alloc_top) - RELOC(alloc_bottom) - 0x4000; if (room > DEVTREE_CHUNK_SIZE) @@ -2053,7 +2055,7 @@ static void __init flatten_device_tree(void) mem_start = (unsigned long)alloc_up(room, PAGE_SIZE); if (mem_start == 0) prom_panic("Can't allocate initial device-tree chunk\n"); - mem_end = RELOC(alloc_top); + mem_end = mem_start + room; /* Get root of tree */ root = call_prom("peer", 1, 1, (phandle)0); diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S index 6dd33581a22..de2950135e6 100644 --- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S +++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S @@ -1251,7 +1251,7 @@ BEGIN_FTR_SECTION reg = 0 .rept 32 li r6,reg*16+VCPU_VSRS - stxvd2x reg,r6,r3 + STXVD2X(reg,r6,r3) reg = reg + 1 .endr FTR_SECTION_ELSE @@ -1313,7 +1313,7 @@ BEGIN_FTR_SECTION reg = 0 .rept 32 li r7,reg*16+VCPU_VSRS - lxvd2x reg,r7,r4 + LXVD2X(reg,r7,r4) reg = reg + 1 .endr FTR_SECTION_ELSE diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index d0af7fb2f34..b9ba86191ae 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -24,7 +24,7 @@ source "arch/powerpc/platforms/wsp/Kconfig" config KVM_GUEST bool "KVM Guest support" - default y + default n ---help--- This option enables various optimizations for running under the KVM hypervisor. Overhead for the kernel when not running inside KVM should diff --git a/arch/powerpc/platforms/pseries/dtl.c b/arch/powerpc/platforms/pseries/dtl.c index e9190073bb9..0e865637006 100644 --- a/arch/powerpc/platforms/pseries/dtl.c +++ b/arch/powerpc/platforms/pseries/dtl.c @@ -181,7 +181,7 @@ static void dtl_stop(struct dtl *dtl) lppaca_of(dtl->cpu).dtl_enable_mask = 0x0; - unregister_dtl(hwcpu, __pa(dtl->buf)); + unregister_dtl(hwcpu); } static u64 dtl_current_index(struct dtl *dtl) diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c index bc0288501f1..83a3ca2fd28 100644 --- a/arch/powerpc/platforms/pseries/hotplug-cpu.c +++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c @@ -135,7 +135,7 @@ static void pseries_mach_cpu_die(void) get_lppaca()->idle = 0; if (get_preferred_offline_state(cpu) == CPU_STATE_ONLINE) { - unregister_slb_shadow(hwcpu, __pa(get_slb_shadow())); + unregister_slb_shadow(hwcpu); /* * Call to start_secondary_resume() will not return. @@ -150,7 +150,7 @@ static void pseries_mach_cpu_die(void) WARN_ON(get_preferred_offline_state(cpu) != CPU_STATE_OFFLINE); set_cpu_current_state(cpu, CPU_STATE_OFFLINE); - unregister_slb_shadow(hwcpu, __pa(get_slb_shadow())); + unregister_slb_shadow(hwcpu); rtas_stop_self(); /* Should never get here... */ diff --git a/arch/powerpc/platforms/pseries/io_event_irq.c b/arch/powerpc/platforms/pseries/io_event_irq.c index c829e6067d5..2c4dd1fb833 100644 --- a/arch/powerpc/platforms/pseries/io_event_irq.c +++ b/arch/powerpc/platforms/pseries/io_event_irq.c @@ -212,17 +212,15 @@ static int __init ioei_init(void) struct device_node *np; ioei_check_exception_token = rtas_token("check-exception"); - if (ioei_check_exception_token == RTAS_UNKNOWN_SERVICE) { - pr_warning("IO Event IRQ not supported on this system !\n"); + if (ioei_check_exception_token == RTAS_UNKNOWN_SERVICE) return -ENODEV; - } + np = of_find_node_by_path("/event-sources/ibm,io-events"); if (np) { request_event_sources_irqs(np, ioei_interrupt, "IO_EVENT"); + pr_info("IBM I/O event interrupts enabled\n"); of_node_put(np); } else { - pr_err("io_event_irq: No ibm,io-events on system! " - "IO Event interrupt disabled.\n"); return -ENODEV; } return 0; diff --git a/arch/powerpc/platforms/pseries/kexec.c b/arch/powerpc/platforms/pseries/kexec.c index 54cf3a4aa16..7d94bdc63d5 100644 --- a/arch/powerpc/platforms/pseries/kexec.c +++ b/arch/powerpc/platforms/pseries/kexec.c @@ -25,20 +25,30 @@ static void pseries_kexec_cpu_down(int crash_shutdown, int secondary) { /* Don't risk a hypervisor call if we're crashing */ if (firmware_has_feature(FW_FEATURE_SPLPAR) && !crash_shutdown) { - unsigned long addr; + int ret; + int cpu = smp_processor_id(); + int hwcpu = hard_smp_processor_id(); - addr = __pa(get_slb_shadow()); - if (unregister_slb_shadow(hard_smp_processor_id(), addr)) - printk("SLB shadow buffer deregistration of " - "cpu %u (hw_cpu_id %d) failed\n", - smp_processor_id(), - hard_smp_processor_id()); + if (get_lppaca()->dtl_enable_mask) { + ret = unregister_dtl(hwcpu); + if (ret) { + pr_err("WARNING: DTL deregistration for cpu " + "%d (hw %d) failed with %d\n", + cpu, hwcpu, ret); + } + } + + ret = unregister_slb_shadow(hwcpu); + if (ret) { + pr_err("WARNING: SLB shadow buffer deregistration " + "for cpu %d (hw %d) failed with %d\n", + cpu, hwcpu, ret); + } - addr = __pa(get_lppaca()); - if (unregister_vpa(hard_smp_processor_id(), addr)) { - printk("VPA deregistration of cpu %u (hw_cpu_id %d) " - "failed\n", smp_processor_id(), - hard_smp_processor_id()); + ret = unregister_vpa(hwcpu); + if (ret) { + pr_err("WARNING: VPA deregistration for cpu %d " + "(hw %d) failed with %d\n", cpu, hwcpu, ret); } } } diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c index f7205d344ef..c9a29dae8c0 100644 --- a/arch/powerpc/platforms/pseries/lpar.c +++ b/arch/powerpc/platforms/pseries/lpar.c @@ -67,9 +67,8 @@ void vpa_init(int cpu) ret = register_vpa(hwcpu, addr); if (ret) { - printk(KERN_ERR "WARNING: vpa_init: VPA registration for " - "cpu %d (hw %d) of area %lx returns %ld\n", - cpu, hwcpu, addr, ret); + pr_err("WARNING: VPA registration for cpu %d (hw %d) of area " + "%lx failed with %ld\n", cpu, hwcpu, addr, ret); return; } /* @@ -80,10 +79,9 @@ void vpa_init(int cpu) if (firmware_has_feature(FW_FEATURE_SPLPAR)) { ret = register_slb_shadow(hwcpu, addr); if (ret) - printk(KERN_ERR - "WARNING: vpa_init: SLB shadow buffer " - "registration for cpu %d (hw %d) of area %lx " - "returns %ld\n", cpu, hwcpu, addr, ret); + pr_err("WARNING: SLB shadow buffer registration for " + "cpu %d (hw %d) of area %lx failed with %ld\n", + cpu, hwcpu, addr, ret); } /* @@ -100,8 +98,9 @@ void vpa_init(int cpu) dtl->enqueue_to_dispatch_time = DISPATCH_LOG_BYTES; ret = register_dtl(hwcpu, __pa(dtl)); if (ret) - pr_warn("DTL registration failed for cpu %d (%ld)\n", - cpu, ret); + pr_err("WARNING: DTL registration of cpu %d (hw %d) " + "failed with %ld\n", smp_processor_id(), + hwcpu, ret); lppaca_of(cpu).dtl_enable_mask = 2; } } @@ -204,7 +203,7 @@ static void pSeries_lpar_hptab_clear(void) unsigned long ptel; } ptes[4]; long lpar_rc; - int i, j; + unsigned long i, j; /* Read in batches of 4, * invalidate only valid entries not in the VRMA diff --git a/arch/powerpc/platforms/pseries/plpar_wrappers.h b/arch/powerpc/platforms/pseries/plpar_wrappers.h index 4bf21207d7d..41c24c146d6 100644 --- a/arch/powerpc/platforms/pseries/plpar_wrappers.h +++ b/arch/powerpc/platforms/pseries/plpar_wrappers.h @@ -53,9 +53,9 @@ static inline long vpa_call(unsigned long flags, unsigned long cpu, return plpar_hcall_norets(H_REGISTER_VPA, flags, cpu, vpa); } -static inline long unregister_vpa(unsigned long cpu, unsigned long vpa) +static inline long unregister_vpa(unsigned long cpu) { - return vpa_call(0x5, cpu, vpa); + return vpa_call(0x5, cpu, 0); } static inline long register_vpa(unsigned long cpu, unsigned long vpa) @@ -63,9 +63,9 @@ static inline long register_vpa(unsigned long cpu, unsigned long vpa) return vpa_call(0x1, cpu, vpa); } -static inline long unregister_slb_shadow(unsigned long cpu, unsigned long vpa) +static inline long unregister_slb_shadow(unsigned long cpu) { - return vpa_call(0x7, cpu, vpa); + return vpa_call(0x7, cpu, 0); } static inline long register_slb_shadow(unsigned long cpu, unsigned long vpa) @@ -73,9 +73,9 @@ static inline long register_slb_shadow(unsigned long cpu, unsigned long vpa) return vpa_call(0x3, cpu, vpa); } -static inline long unregister_dtl(unsigned long cpu, unsigned long vpa) +static inline long unregister_dtl(unsigned long cpu) { - return vpa_call(0x6, cpu, vpa); + return vpa_call(0x6, cpu, 0); } static inline long register_dtl(unsigned long cpu, unsigned long vpa) diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index d00e52926b7..0969fd98c4f 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -324,8 +324,9 @@ static int alloc_dispatch_logs(void) dtl->enqueue_to_dispatch_time = DISPATCH_LOG_BYTES; ret = register_dtl(hard_smp_processor_id(), __pa(dtl)); if (ret) - pr_warn("DTL registration failed for boot cpu %d (%d)\n", - smp_processor_id(), ret); + pr_err("WARNING: DTL registration of cpu %d (hw %d) failed " + "with %d\n", smp_processor_id(), + hard_smp_processor_id(), ret); get_paca()->lppaca_ptr->dtl_enable_mask = 2; return 0; diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c index a59ba96d2c2..dbfe96bc878 100644 --- a/arch/powerpc/sysdev/ppc4xx_pci.c +++ b/arch/powerpc/sysdev/ppc4xx_pci.c @@ -655,8 +655,6 @@ struct ppc4xx_pciex_hwops static struct ppc4xx_pciex_hwops *ppc4xx_pciex_hwops; -#ifdef CONFIG_44x - static int __init ppc4xx_pciex_wait_on_sdr(struct ppc4xx_pciex_port *port, unsigned int sdr_offset, unsigned int mask, @@ -688,6 +686,7 @@ static int __init ppc4xx_pciex_port_reset_sdr(struct ppc4xx_pciex_port *port) return 0; } + static void __init ppc4xx_pciex_check_link_sdr(struct ppc4xx_pciex_port *port) { printk(KERN_INFO "PCIE%d: Checking link...\n", port->index); @@ -718,6 +717,8 @@ static void __init ppc4xx_pciex_check_link_sdr(struct ppc4xx_pciex_port *port) printk(KERN_INFO "PCIE%d: No device detected.\n", port->index); } +#ifdef CONFIG_44x + /* Check various reset bits of the 440SPe PCIe core */ static int __init ppc440spe_pciex_check_reset(struct device_node *np) { diff --git a/arch/sparc/kernel/ds.c b/arch/sparc/kernel/ds.c index 490e5418740..7429b47c3ac 100644 --- a/arch/sparc/kernel/ds.c +++ b/arch/sparc/kernel/ds.c @@ -1256,13 +1256,14 @@ static int __init ds_init(void) { unsigned long hv_ret, major, minor; - hv_ret = sun4v_get_version(HV_GRP_REBOOT_DATA, &major, &minor); - if (hv_ret == HV_EOK) { - pr_info("SUN4V: Reboot data supported (maj=%lu,min=%lu).\n", - major, minor); - reboot_data_supported = 1; + if (tlb_type == hypervisor) { + hv_ret = sun4v_get_version(HV_GRP_REBOOT_DATA, &major, &minor); + if (hv_ret == HV_EOK) { + pr_info("SUN4V: Reboot data supported (maj=%lu,min=%lu).\n", + major, minor); + reboot_data_supported = 1; + } } - kthread_run(ds_thread, NULL, "kldomd"); return vio_register_driver(&ds_driver); diff --git a/arch/x86/include/asm/desc.h b/arch/x86/include/asm/desc.h index 7b439d9aea2..41935fadfdf 100644 --- a/arch/x86/include/asm/desc.h +++ b/arch/x86/include/asm/desc.h @@ -27,8 +27,8 @@ static inline void fill_ldt(struct desc_struct *desc, const struct user_desc *in desc->base2 = (info->base_addr & 0xff000000) >> 24; /* - * Don't allow setting of the lm bit. It is useless anyway - * because 64bit system calls require __USER_CS: + * Don't allow setting of the lm bit. It would confuse + * user_64bit_mode and would get overridden by sysret anyway. */ desc->l = 0; } diff --git a/arch/x86/include/asm/irq_vectors.h b/arch/x86/include/asm/irq_vectors.h index f9a320984a1..7e50f06393a 100644 --- a/arch/x86/include/asm/irq_vectors.h +++ b/arch/x86/include/asm/irq_vectors.h @@ -17,7 +17,6 @@ * Vectors 0 ... 31 : system traps and exceptions - hardcoded events * Vectors 32 ... 127 : device interrupts * Vector 128 : legacy int80 syscall interface - * Vector 204 : legacy x86_64 vsyscall emulation * Vectors 129 ... INVALIDATE_TLB_VECTOR_START-1 except 204 : device interrupts * Vectors INVALIDATE_TLB_VECTOR_START ... 255 : special interrupts * @@ -51,9 +50,6 @@ #ifdef CONFIG_X86_32 # define SYSCALL_VECTOR 0x80 #endif -#ifdef CONFIG_X86_64 -# define VSYSCALL_EMU_VECTOR 0xcc -#endif /* * Vectors 0x30-0x3f are used for ISA interrupts. diff --git a/arch/x86/include/asm/paravirt_types.h b/arch/x86/include/asm/paravirt_types.h index 2c765216311..8e8b9a4987e 100644 --- a/arch/x86/include/asm/paravirt_types.h +++ b/arch/x86/include/asm/paravirt_types.h @@ -41,6 +41,7 @@ #include <asm/desc_defs.h> #include <asm/kmap_types.h> +#include <asm/pgtable_types.h> struct page; struct thread_struct; @@ -63,6 +64,11 @@ struct paravirt_callee_save { struct pv_info { unsigned int kernel_rpl; int shared_kernel_pmd; + +#ifdef CONFIG_X86_64 + u16 extra_user_64bit_cs; /* __USER_CS if none */ +#endif + int paravirt_enabled; const char *name; }; diff --git a/arch/x86/include/asm/ptrace.h b/arch/x86/include/asm/ptrace.h index 94e7618fcac..35664547125 100644 --- a/arch/x86/include/asm/ptrace.h +++ b/arch/x86/include/asm/ptrace.h @@ -131,6 +131,9 @@ struct pt_regs { #ifdef __KERNEL__ #include <linux/init.h> +#ifdef CONFIG_PARAVIRT +#include <asm/paravirt_types.h> +#endif struct cpuinfo_x86; struct task_struct; @@ -187,6 +190,22 @@ static inline int v8086_mode(struct pt_regs *regs) #endif } +#ifdef CONFIG_X86_64 +static inline bool user_64bit_mode(struct pt_regs *regs) +{ +#ifndef CONFIG_PARAVIRT + /* + * On non-paravirt systems, this is the only long mode CPL 3 + * selector. We do not allow long mode selectors in the LDT. + */ + return regs->cs == __USER_CS; +#else + /* Headers are too twisted for this to go in paravirt.h. */ + return regs->cs == __USER_CS || regs->cs == pv_info.extra_user_64bit_cs; +#endif +} +#endif + /* * X86_32 CPUs don't save ss and esp if the CPU is already in kernel mode * when it traps. The previous stack will be directly underneath the saved diff --git a/arch/x86/include/asm/traps.h b/arch/x86/include/asm/traps.h index 2bae0a513b4..0012d0902c5 100644 --- a/arch/x86/include/asm/traps.h +++ b/arch/x86/include/asm/traps.h @@ -40,7 +40,6 @@ asmlinkage void alignment_check(void); asmlinkage void machine_check(void); #endif /* CONFIG_X86_MCE */ asmlinkage void simd_coprocessor_error(void); -asmlinkage void emulate_vsyscall(void); dotraplinkage void do_divide_error(struct pt_regs *, long); dotraplinkage void do_debug(struct pt_regs *, long); @@ -67,7 +66,6 @@ dotraplinkage void do_alignment_check(struct pt_regs *, long); dotraplinkage void do_machine_check(struct pt_regs *, long); #endif dotraplinkage void do_simd_coprocessor_error(struct pt_regs *, long); -dotraplinkage void do_emulate_vsyscall(struct pt_regs *, long); #ifdef CONFIG_X86_32 dotraplinkage void do_iret_error(struct pt_regs *, long); #endif diff --git a/arch/x86/include/asm/unistd_64.h b/arch/x86/include/asm/unistd_64.h index 705bf139288..d92641cc7ac 100644 --- a/arch/x86/include/asm/unistd_64.h +++ b/arch/x86/include/asm/unistd_64.h @@ -681,6 +681,8 @@ __SYSCALL(__NR_syncfs, sys_syncfs) __SYSCALL(__NR_sendmmsg, sys_sendmmsg) #define __NR_setns 308 __SYSCALL(__NR_setns, sys_setns) +#define __NR_getcpu 309 +__SYSCALL(__NR_getcpu, sys_getcpu) #ifndef __NO_STUBS #define __ARCH_WANT_OLD_READDIR diff --git a/arch/x86/include/asm/vsyscall.h b/arch/x86/include/asm/vsyscall.h index 60107072c28..eaea1d31f75 100644 --- a/arch/x86/include/asm/vsyscall.h +++ b/arch/x86/include/asm/vsyscall.h @@ -27,6 +27,12 @@ extern struct timezone sys_tz; extern void map_vsyscall(void); +/* + * Called on instruction fetch fault in vsyscall page. + * Returns true if handled. + */ +extern bool emulate_vsyscall(struct pt_regs *regs, unsigned long address); + #endif /* __KERNEL__ */ #endif /* _ASM_X86_VSYSCALL_H */ diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 04105574c8e..82f2912155a 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -17,19 +17,6 @@ CFLAGS_REMOVE_ftrace.o = -pg CFLAGS_REMOVE_early_printk.o = -pg endif -# -# vsyscalls (which work on the user stack) should have -# no stack-protector checks: -# -nostackp := $(call cc-option, -fno-stack-protector) -CFLAGS_vsyscall_64.o := $(PROFILING) -g0 $(nostackp) -CFLAGS_hpet.o := $(nostackp) -CFLAGS_paravirt.o := $(nostackp) -GCOV_PROFILE_vsyscall_64.o := n -GCOV_PROFILE_hpet.o := n -GCOV_PROFILE_tsc.o := n -GCOV_PROFILE_paravirt.o := n - obj-y := process_$(BITS).o signal.o entry_$(BITS).o obj-y += traps.o irq.o irq_$(BITS).o dumpstack_$(BITS).o obj-y += time.o ioport.o ldt.o dumpstack.o diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c index 45fbb8f7f54..f88af2c2a56 100644 --- a/arch/x86/kernel/cpu/perf_event_intel.c +++ b/arch/x86/kernel/cpu/perf_event_intel.c @@ -1590,6 +1590,7 @@ static __init int intel_pmu_init(void) break; case 42: /* SandyBridge */ + case 45: /* SandyBridge, "Romely-EP" */ memcpy(hw_cache_event_ids, snb_hw_cache_event_ids, sizeof(hw_cache_event_ids)); diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index e13329d800c..6419bb05ecd 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -1111,7 +1111,6 @@ zeroentry spurious_interrupt_bug do_spurious_interrupt_bug zeroentry coprocessor_error do_coprocessor_error errorentry alignment_check do_alignment_check zeroentry simd_coprocessor_error do_simd_coprocessor_error -zeroentry emulate_vsyscall do_emulate_vsyscall /* Reload gs selector with exception handling */ diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c index 613a7931ecc..d90272e6bc4 100644 --- a/arch/x86/kernel/paravirt.c +++ b/arch/x86/kernel/paravirt.c @@ -307,6 +307,10 @@ struct pv_info pv_info = { .paravirt_enabled = 0, .kernel_rpl = 0, .shared_kernel_pmd = 1, /* Only used when CONFIG_X86_PAE is set */ + +#ifdef CONFIG_X86_64 + .extra_user_64bit_cs = __USER_CS, +#endif }; struct pv_init_ops pv_init_ops = { diff --git a/arch/x86/kernel/step.c b/arch/x86/kernel/step.c index 7977f0cfe33..c346d116148 100644 --- a/arch/x86/kernel/step.c +++ b/arch/x86/kernel/step.c @@ -74,7 +74,7 @@ static int is_setting_trap_flag(struct task_struct *child, struct pt_regs *regs) #ifdef CONFIG_X86_64 case 0x40 ... 0x4f: - if (regs->cs != __USER_CS) + if (!user_64bit_mode(regs)) /* 32-bit mode: register increment */ return 0; /* 64-bit mode: REX prefix */ diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c index 9682ec50180..6913369c234 100644 --- a/arch/x86/kernel/traps.c +++ b/arch/x86/kernel/traps.c @@ -872,12 +872,6 @@ void __init trap_init(void) set_bit(SYSCALL_VECTOR, used_vectors); #endif -#ifdef CONFIG_X86_64 - BUG_ON(test_bit(VSYSCALL_EMU_VECTOR, used_vectors)); - set_system_intr_gate(VSYSCALL_EMU_VECTOR, &emulate_vsyscall); - set_bit(VSYSCALL_EMU_VECTOR, used_vectors); -#endif - /* * Should be a barrier for any external CPU state: */ diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S index 4aa9c54a9b7..0f703f10901 100644 --- a/arch/x86/kernel/vmlinux.lds.S +++ b/arch/x86/kernel/vmlinux.lds.S @@ -71,7 +71,6 @@ PHDRS { text PT_LOAD FLAGS(5); /* R_E */ data PT_LOAD FLAGS(6); /* RW_ */ #ifdef CONFIG_X86_64 - user PT_LOAD FLAGS(5); /* R_E */ #ifdef CONFIG_SMP percpu PT_LOAD FLAGS(6); /* RW_ */ #endif @@ -154,44 +153,16 @@ SECTIONS #ifdef CONFIG_X86_64 -#define VSYSCALL_ADDR (-10*1024*1024) - -#define VLOAD_OFFSET (VSYSCALL_ADDR - __vsyscall_0 + LOAD_OFFSET) -#define VLOAD(x) (ADDR(x) - VLOAD_OFFSET) - -#define VVIRT_OFFSET (VSYSCALL_ADDR - __vsyscall_0) -#define VVIRT(x) (ADDR(x) - VVIRT_OFFSET) - - . = ALIGN(4096); - __vsyscall_0 = .; - - . = VSYSCALL_ADDR; - .vsyscall : AT(VLOAD(.vsyscall)) { - *(.vsyscall_0) - - . = 1024; - *(.vsyscall_1) - - . = 2048; - *(.vsyscall_2) - - . = 4096; /* Pad the whole page. */ - } :user =0xcc - . = ALIGN(__vsyscall_0 + PAGE_SIZE, PAGE_SIZE); - -#undef VSYSCALL_ADDR -#undef VLOAD_OFFSET -#undef VLOAD -#undef VVIRT_OFFSET -#undef VVIRT - + . = ALIGN(PAGE_SIZE); __vvar_page = .; .vvar : AT(ADDR(.vvar) - LOAD_OFFSET) { + /* work around gold bug 13023 */ + __vvar_beginning_hack = .; - /* Place all vvars at the offsets in asm/vvar.h. */ -#define EMIT_VVAR(name, offset) \ - . = offset; \ + /* Place all vvars at the offsets in asm/vvar.h. */ +#define EMIT_VVAR(name, offset) \ + . = __vvar_beginning_hack + offset; \ *(.vvar_ ## name) #define __VVAR_KERNEL_LDS #include <asm/vvar.h> diff --git a/arch/x86/kernel/vsyscall_64.c b/arch/x86/kernel/vsyscall_64.c index dda7dff9cef..18ae83dd1cd 100644 --- a/arch/x86/kernel/vsyscall_64.c +++ b/arch/x86/kernel/vsyscall_64.c @@ -18,9 +18,6 @@ * use the vDSO. */ -/* Disable profiling for userspace code: */ -#define DISABLE_BRANCH_PROFILING - #include <linux/time.h> #include <linux/init.h> #include <linux/kernel.h> @@ -50,12 +47,36 @@ #include <asm/vgtod.h> #include <asm/traps.h> +#define CREATE_TRACE_POINTS +#include "vsyscall_trace.h" + DEFINE_VVAR(int, vgetcpu_mode); DEFINE_VVAR(struct vsyscall_gtod_data, vsyscall_gtod_data) = { .lock = __SEQLOCK_UNLOCKED(__vsyscall_gtod_data.lock), }; +static enum { EMULATE, NATIVE, NONE } vsyscall_mode = EMULATE; + +static int __init vsyscall_setup(char *str) +{ + if (str) { + if (!strcmp("emulate", str)) + vsyscall_mode = EMULATE; + else if (!strcmp("native", str)) + vsyscall_mode = NATIVE; + else if (!strcmp("none", str)) + vsyscall_mode = NONE; + else + return -EINVAL; + + return 0; + } + + return -EINVAL; +} +early_param("vsyscall", vsyscall_setup); + void update_vsyscall_tz(void) { unsigned long flags; @@ -100,7 +121,7 @@ static void warn_bad_vsyscall(const char *level, struct pt_regs *regs, printk("%s%s[%d] %s ip:%lx cs:%lx sp:%lx ax:%lx si:%lx di:%lx\n", level, tsk->comm, task_pid_nr(tsk), - message, regs->ip - 2, regs->cs, + message, regs->ip, regs->cs, regs->sp, regs->ax, regs->si, regs->di); } @@ -118,46 +139,39 @@ static int addr_to_vsyscall_nr(unsigned long addr) return nr; } -void dotraplinkage do_emulate_vsyscall(struct pt_regs *regs, long error_code) +bool emulate_vsyscall(struct pt_regs *regs, unsigned long address) { struct task_struct *tsk; unsigned long caller; int vsyscall_nr; long ret; - local_irq_enable(); - /* - * Real 64-bit user mode code has cs == __USER_CS. Anything else - * is bogus. + * No point in checking CS -- the only way to get here is a user mode + * trap to a high address, which means that we're in 64-bit user code. */ - if (regs->cs != __USER_CS) { - /* - * If we trapped from kernel mode, we might as well OOPS now - * instead of returning to some random address and OOPSing - * then. - */ - BUG_ON(!user_mode(regs)); - /* Compat mode and non-compat 32-bit CS should both segfault. */ - warn_bad_vsyscall(KERN_WARNING, regs, - "illegal int 0xcc from 32-bit mode"); - goto sigsegv; + WARN_ON_ONCE(address != regs->ip); + + if (vsyscall_mode == NONE) { + warn_bad_vsyscall(KERN_INFO, regs, + "vsyscall attempted with vsyscall=none"); + return false; } - /* - * x86-ism here: regs->ip points to the instruction after the int 0xcc, - * and int 0xcc is two bytes long. - */ - vsyscall_nr = addr_to_vsyscall_nr(regs->ip - 2); + vsyscall_nr = addr_to_vsyscall_nr(address); + + trace_emulate_vsyscall(vsyscall_nr); + if (vsyscall_nr < 0) { warn_bad_vsyscall(KERN_WARNING, regs, - "illegal int 0xcc (exploit attempt?)"); + "misaligned vsyscall (exploit attempt or buggy program) -- look up the vsyscall kernel parameter if you need a workaround"); goto sigsegv; } if (get_user(caller, (unsigned long __user *)regs->sp) != 0) { - warn_bad_vsyscall(KERN_WARNING, regs, "int 0xcc with bad stack (exploit attempt?)"); + warn_bad_vsyscall(KERN_WARNING, regs, + "vsyscall with bad stack (exploit attempt?)"); goto sigsegv; } @@ -202,13 +216,11 @@ void dotraplinkage do_emulate_vsyscall(struct pt_regs *regs, long error_code) regs->ip = caller; regs->sp += 8; - local_irq_disable(); - return; + return true; sigsegv: - regs->ip -= 2; /* The faulting instruction should be the int 0xcc. */ force_sig(SIGSEGV, current); - local_irq_disable(); + return true; } /* @@ -256,15 +268,21 @@ cpu_vsyscall_notifier(struct notifier_block *n, unsigned long action, void *arg) void __init map_vsyscall(void) { - extern char __vsyscall_0; - unsigned long physaddr_page0 = __pa_symbol(&__vsyscall_0); + extern char __vsyscall_page; + unsigned long physaddr_vsyscall = __pa_symbol(&__vsyscall_page); extern char __vvar_page; unsigned long physaddr_vvar_page = __pa_symbol(&__vvar_page); - /* Note that VSYSCALL_MAPPED_PAGES must agree with the code below. */ - __set_fixmap(VSYSCALL_FIRST_PAGE, physaddr_page0, PAGE_KERNEL_VSYSCALL); + __set_fixmap(VSYSCALL_FIRST_PAGE, physaddr_vsyscall, + vsyscall_mode == NATIVE + ? PAGE_KERNEL_VSYSCALL + : PAGE_KERNEL_VVAR); + BUILD_BUG_ON((unsigned long)__fix_to_virt(VSYSCALL_FIRST_PAGE) != + (unsigned long)VSYSCALL_START); + __set_fixmap(VVAR_PAGE, physaddr_vvar_page, PAGE_KERNEL_VVAR); - BUILD_BUG_ON((unsigned long)__fix_to_virt(VVAR_PAGE) != (unsigned long)VVAR_ADDRESS); + BUILD_BUG_ON((unsigned long)__fix_to_virt(VVAR_PAGE) != + (unsigned long)VVAR_ADDRESS); } static int __init vsyscall_init(void) diff --git a/arch/x86/kernel/vsyscall_emu_64.S b/arch/x86/kernel/vsyscall_emu_64.S index ffa845eae5c..c9596a9af15 100644 --- a/arch/x86/kernel/vsyscall_emu_64.S +++ b/arch/x86/kernel/vsyscall_emu_64.S @@ -7,21 +7,31 @@ */ #include <linux/linkage.h> + #include <asm/irq_vectors.h> +#include <asm/page_types.h> +#include <asm/unistd_64.h> + +__PAGE_ALIGNED_DATA + .globl __vsyscall_page + .balign PAGE_SIZE, 0xcc + .type __vsyscall_page, @object +__vsyscall_page: + + mov $__NR_gettimeofday, %rax + syscall + ret -/* The unused parts of the page are filled with 0xcc by the linker script. */ + .balign 1024, 0xcc + mov $__NR_time, %rax + syscall + ret -.section .vsyscall_0, "a" -ENTRY(vsyscall_0) - int $VSYSCALL_EMU_VECTOR -END(vsyscall_0) + .balign 1024, 0xcc + mov $__NR_getcpu, %rax + syscall + ret -.section .vsyscall_1, "a" -ENTRY(vsyscall_1) - int $VSYSCALL_EMU_VECTOR -END(vsyscall_1) + .balign 4096, 0xcc -.section .vsyscall_2, "a" -ENTRY(vsyscall_2) - int $VSYSCALL_EMU_VECTOR -END(vsyscall_2) + .size __vsyscall_page, 4096 diff --git a/arch/x86/kernel/vsyscall_trace.h b/arch/x86/kernel/vsyscall_trace.h new file mode 100644 index 00000000000..a8b2edec54f --- /dev/null +++ b/arch/x86/kernel/vsyscall_trace.h @@ -0,0 +1,29 @@ +#undef TRACE_SYSTEM +#define TRACE_SYSTEM vsyscall + +#if !defined(__VSYSCALL_TRACE_H) || defined(TRACE_HEADER_MULTI_READ) +#define __VSYSCALL_TRACE_H + +#include <linux/tracepoint.h> + +TRACE_EVENT(emulate_vsyscall, + + TP_PROTO(int nr), + + TP_ARGS(nr), + + TP_STRUCT__entry(__field(int, nr)), + + TP_fast_assign( + __entry->nr = nr; + ), + + TP_printk("nr = %d", __entry->nr) +); + +#endif + +#undef TRACE_INCLUDE_PATH +#define TRACE_INCLUDE_PATH ../../arch/x86/kernel +#define TRACE_INCLUDE_FILE vsyscall_trace +#include <trace/define_trace.h> diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c index 4d09df054e3..247aae3dc00 100644 --- a/arch/x86/mm/fault.c +++ b/arch/x86/mm/fault.c @@ -105,7 +105,7 @@ check_prefetch_opcode(struct pt_regs *regs, unsigned char *instr, * but for now it's good enough to assume that long * mode only uses well known segments or kernel. */ - return (!user_mode(regs)) || (regs->cs == __USER_CS); + return (!user_mode(regs) || user_64bit_mode(regs)); #endif case 0x60: /* 0x64 thru 0x67 are valid prefixes in all modes. */ @@ -720,6 +720,18 @@ __bad_area_nosemaphore(struct pt_regs *regs, unsigned long error_code, if (is_errata100(regs, address)) return; +#ifdef CONFIG_X86_64 + /* + * Instruction fetch faults in the vsyscall page might need + * emulation. + */ + if (unlikely((error_code & PF_INSTR) && + ((address & ~0xfff) == VSYSCALL_START))) { + if (emulate_vsyscall(regs, address)) + return; + } +#endif + if (unlikely(show_unhandled_signals)) show_signal_msg(regs, error_code, address, tsk); diff --git a/arch/x86/vdso/vdso.S b/arch/x86/vdso/vdso.S index 1b979c12ba8..01f5e3b4613 100644 --- a/arch/x86/vdso/vdso.S +++ b/arch/x86/vdso/vdso.S @@ -9,6 +9,7 @@ __PAGE_ALIGNED_DATA vdso_start: .incbin "arch/x86/vdso/vdso.so" vdso_end: + .align PAGE_SIZE /* extra data here leaks to userspace. */ .previous diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 974a528458a..e2345af01af 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -951,6 +951,10 @@ static const struct pv_info xen_info __initconst = { .paravirt_enabled = 1, .shared_kernel_pmd = 0, +#ifdef CONFIG_X86_64 + .extra_user_64bit_cs = FLAT_USER_CS64, +#endif + .name = "Xen", }; diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index f987bde77c4..8cce339db5e 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -1916,6 +1916,7 @@ static void xen_set_fixmap(unsigned idx, phys_addr_t phys, pgprot_t prot) # endif #else case VSYSCALL_LAST_PAGE ... VSYSCALL_FIRST_PAGE: + case VVAR_PAGE: #endif case FIX_TEXT_POKE0: case FIX_TEXT_POKE1: @@ -1956,7 +1957,8 @@ static void xen_set_fixmap(unsigned idx, phys_addr_t phys, pgprot_t prot) #ifdef CONFIG_X86_64 /* Replicate changes to map the vsyscall page into the user pagetable vsyscall mapping. */ - if (idx >= VSYSCALL_LAST_PAGE && idx <= VSYSCALL_FIRST_PAGE) { + if ((idx >= VSYSCALL_LAST_PAGE && idx <= VSYSCALL_FIRST_PAGE) || + idx == VVAR_PAGE) { unsigned long vaddr = __fix_to_virt(idx); set_pte_vaddr_pud(level3_user_vsyscall, vaddr, pte); } diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 196a7378d33..be21e3f138a 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -80,6 +80,7 @@ #include <linux/interrupt.h> #include <linux/slab.h> #include <linux/delay.h> +#include <linux/dma-mapping.h> #include <linux/dmapool.h> #include <linux/dmaengine.h> #include <linux/amba/bus.h> diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index e61a4e57353..8cb75a6efec 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -3419,9 +3419,27 @@ static int bond_xmit_hash_policy_l2(struct sk_buff *skb, int count) static int bond_open(struct net_device *bond_dev) { struct bonding *bond = netdev_priv(bond_dev); + struct slave *slave; + int i; bond->kill_timers = 0; + /* reset slave->backup and slave->inactive */ + read_lock(&bond->lock); + if (bond->slave_cnt > 0) { + read_lock(&bond->curr_slave_lock); + bond_for_each_slave(bond, slave, i) { + if ((bond->params.mode == BOND_MODE_ACTIVEBACKUP) + && (slave != bond->curr_active_slave)) { + bond_set_slave_inactive_flags(slave); + } else { + bond_set_slave_active_flags(slave); + } + } + read_unlock(&bond->curr_slave_lock); + } + read_unlock(&bond->lock); + INIT_DELAYED_WORK(&bond->mcast_work, bond_resend_igmp_join_requests_delayed); if (bond_is_lb(bond)) { diff --git a/drivers/net/can/sja1000/plx_pci.c b/drivers/net/can/sja1000/plx_pci.c index 231385b8e08..c7f3d4ea116 100644 --- a/drivers/net/can/sja1000/plx_pci.c +++ b/drivers/net/can/sja1000/plx_pci.c @@ -408,7 +408,7 @@ static void plx_pci_del_card(struct pci_dev *pdev) struct sja1000_priv *priv; int i = 0; - for (i = 0; i < card->channels; i++) { + for (i = 0; i < PLX_PCI_MAX_CHAN; i++) { dev = card->net_dev[i]; if (!dev) continue; @@ -536,7 +536,6 @@ static int __devinit plx_pci_add_card(struct pci_dev *pdev, if (err) { dev_err(&pdev->dev, "Registering device failed " "(err=%d)\n", err); - free_sja1000dev(dev); goto failure_cleanup; } @@ -549,6 +548,7 @@ static int __devinit plx_pci_add_card(struct pci_dev *pdev, dev_err(&pdev->dev, "Channel #%d not detected\n", i + 1); free_sja1000dev(dev); + card->net_dev[i] = NULL; } } diff --git a/drivers/net/can/slcan.c b/drivers/net/can/slcan.c index f523f1cc514..4b70b7e8bde 100644 --- a/drivers/net/can/slcan.c +++ b/drivers/net/can/slcan.c @@ -197,7 +197,7 @@ static void slc_bump(struct slcan *sl) skb->ip_summed = CHECKSUM_UNNECESSARY; memcpy(skb_put(skb, sizeof(struct can_frame)), &cf, sizeof(struct can_frame)); - netif_rx(skb); + netif_rx_ni(skb); sl->dev->stats.rx_packets++; sl->dev->stats.rx_bytes += cf.can_dlc; diff --git a/drivers/net/ethernet/amd/pcnet32.c b/drivers/net/ethernet/amd/pcnet32.c index e19c1a73c95..c90fe917090 100644 --- a/drivers/net/ethernet/amd/pcnet32.c +++ b/drivers/net/ethernet/amd/pcnet32.c @@ -82,7 +82,7 @@ static int cards_found; /* * VLB I/O addresses */ -static unsigned int pcnet32_portlist[] __initdata = +static unsigned int pcnet32_portlist[] = { 0x300, 0x320, 0x340, 0x360, 0 }; static int pcnet32_debug; diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index 23b37dd79df..93bff08c87a 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -65,8 +65,9 @@ static inline void bnx2x_bz_fp(struct bnx2x *bp, int index) fp->disable_tpa = ((bp->flags & TPA_ENABLE_FLAG) == 0); #ifdef BCM_CNIC - /* We don't want TPA on FCoE, FWD and OOO L2 rings */ - bnx2x_fcoe(bp, disable_tpa) = 1; + /* We don't want TPA on an FCoE L2 ring */ + if (IS_FCOE_FP(fp)) + fp->disable_tpa = 1; #endif } @@ -1410,10 +1411,9 @@ void bnx2x_netif_stop(struct bnx2x *bp, int disable_hw) u16 bnx2x_select_queue(struct net_device *dev, struct sk_buff *skb) { struct bnx2x *bp = netdev_priv(dev); + #ifdef BCM_CNIC - if (NO_FCOE(bp)) - return skb_tx_hash(dev, skb); - else { + if (!NO_FCOE(bp)) { struct ethhdr *hdr = (struct ethhdr *)skb->data; u16 ether_type = ntohs(hdr->h_proto); @@ -1430,8 +1430,7 @@ u16 bnx2x_select_queue(struct net_device *dev, struct sk_buff *skb) return bnx2x_fcoe_tx(bp, txq_index); } #endif - /* Select a none-FCoE queue: if FCoE is enabled, exclude FCoE L2 ring - */ + /* select a non-FCoE queue */ return __skb_tx_hash(dev, skb, BNX2X_NUM_ETH_QUEUES(bp)); } @@ -1454,6 +1453,28 @@ void bnx2x_set_num_queues(struct bnx2x *bp) bp->num_queues += NON_ETH_CONTEXT_USE; } +/** + * bnx2x_set_real_num_queues - configure netdev->real_num_[tx,rx]_queues + * + * @bp: Driver handle + * + * We currently support for at most 16 Tx queues for each CoS thus we will + * allocate a multiple of 16 for ETH L2 rings according to the value of the + * bp->max_cos. + * + * If there is an FCoE L2 queue the appropriate Tx queue will have the next + * index after all ETH L2 indices. + * + * If the actual number of Tx queues (for each CoS) is less than 16 then there + * will be the holes at the end of each group of 16 ETh L2 indices (0..15, + * 16..31,...) with indicies that are not coupled with any real Tx queue. + * + * The proper configuration of skb->queue_mapping is handled by + * bnx2x_select_queue() and __skb_tx_hash(). + * + * bnx2x_setup_tc() takes care of the proper TC mappings so that __skb_tx_hash() + * will return a proper Tx index if TC is enabled (netdev->num_tc > 0). + */ static inline int bnx2x_set_real_num_queues(struct bnx2x *bp) { int rc, tx, rx; diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c index 9525b936cf6..0b9bd551580 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c @@ -923,7 +923,7 @@ static void bnx2x_dcbx_admin_mib_updated_params(struct bnx2x *bp, void bnx2x_dcbx_set_state(struct bnx2x *bp, bool dcb_on, u32 dcbx_enabled) { - if (!CHIP_IS_E1x(bp)) { + if (!CHIP_IS_E1x(bp) && !CHIP_IS_E3(bp)) { bp->dcb_state = dcb_on; bp->dcbx_enabled = dcbx_enabled; } else { diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index f4ab90c2089..72047899395 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -5794,6 +5794,12 @@ static int bnx2x_init_hw_common(struct bnx2x *bp) DP(BNX2X_MSG_MCP, "starting common init func %d\n", BP_ABS_FUNC(bp)); + /* + * take the UNDI lock to protect undi_unload flow from accessing + * registers while we're resetting the chip + */ + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_UNDI); + bnx2x_reset_common(bp); REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0xffffffff); @@ -5804,6 +5810,8 @@ static int bnx2x_init_hw_common(struct bnx2x *bp) } REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, val); + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI); + bnx2x_init_block(bp, BLOCK_MISC, PHASE_COMMON); if (!CHIP_IS_E1x(bp)) { @@ -10245,10 +10253,17 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev, /* clean indirect addresses */ pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS, PCICFG_VENDOR_ID_OFFSET); - REG_WR(bp, PXP2_REG_PGL_ADDR_88_F0 + BP_PORT(bp)*16, 0); - REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F0 + BP_PORT(bp)*16, 0); - REG_WR(bp, PXP2_REG_PGL_ADDR_90_F0 + BP_PORT(bp)*16, 0); - REG_WR(bp, PXP2_REG_PGL_ADDR_94_F0 + BP_PORT(bp)*16, 0); + /* Clean the following indirect addresses for all functions since it + * is not used by the driver. + */ + REG_WR(bp, PXP2_REG_PGL_ADDR_88_F0, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F0, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_90_F0, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_94_F0, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_88_F1, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F1, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_90_F1, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_94_F1, 0); /* * Enable internal target-read (in case we are probed after PF FLR). diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h index 27b5ecb1183..40266c14e6d 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h @@ -3007,11 +3007,27 @@ /* [R 6] Debug only: Number of used entries in the data FIFO */ #define PXP2_REG_HST_DATA_FIFO_STATUS 0x12047c /* [R 7] Debug only: Number of used entries in the header FIFO */ -#define PXP2_REG_HST_HEADER_FIFO_STATUS 0x120478 -#define PXP2_REG_PGL_ADDR_88_F0 0x120534 -#define PXP2_REG_PGL_ADDR_8C_F0 0x120538 -#define PXP2_REG_PGL_ADDR_90_F0 0x12053c -#define PXP2_REG_PGL_ADDR_94_F0 0x120540 +#define PXP2_REG_HST_HEADER_FIFO_STATUS 0x120478 +#define PXP2_REG_PGL_ADDR_88_F0 0x120534 +/* [R 32] GRC address for configuration access to PCIE config address 0x88. + * any write to this PCIE address will cause a GRC write access to the + * address that's in t this register */ +#define PXP2_REG_PGL_ADDR_88_F1 0x120544 +#define PXP2_REG_PGL_ADDR_8C_F0 0x120538 +/* [R 32] GRC address for configuration access to PCIE config address 0x8c. + * any write to this PCIE address will cause a GRC write access to the + * address that's in t this register */ +#define PXP2_REG_PGL_ADDR_8C_F1 0x120548 +#define PXP2_REG_PGL_ADDR_90_F0 0x12053c +/* [R 32] GRC address for configuration access to PCIE config address 0x90. + * any write to this PCIE address will cause a GRC write access to the + * address that's in t this register */ +#define PXP2_REG_PGL_ADDR_90_F1 0x12054c +#define PXP2_REG_PGL_ADDR_94_F0 0x120540 +/* [R 32] GRC address for configuration access to PCIE config address 0x94. + * any write to this PCIE address will cause a GRC write access to the + * address that's in t this register */ +#define PXP2_REG_PGL_ADDR_94_F1 0x120550 #define PXP2_REG_PGL_CONTROL0 0x120490 #define PXP2_REG_PGL_CONTROL1 0x120514 #define PXP2_REG_PGL_DEBUG 0x120520 diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c index 29dff1ec7f2..81d409d08c9 100644 --- a/drivers/net/ethernet/freescale/gianfar.c +++ b/drivers/net/ethernet/freescale/gianfar.c @@ -2710,8 +2710,13 @@ static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb, /* Tell the skb what kind of packet this is */ skb->protocol = eth_type_trans(skb, dev); - /* Set vlan tag */ - if (fcb->flags & RXFCB_VLN) + /* + * There's need to check for NETIF_F_HW_VLAN_RX here. + * Even if vlan rx accel is disabled, on some chips + * RXFCB_VLN is pseudo randomly set. + */ + if (dev->features & NETIF_F_HW_VLAN_RX && + fcb->flags & RXFCB_VLN) __vlan_hwaccel_put_tag(skb, fcb->vlctl); /* Send the packet up the stack */ diff --git a/drivers/net/ethernet/freescale/gianfar_ethtool.c b/drivers/net/ethernet/freescale/gianfar_ethtool.c index 6e350692d11..25a8c2adb00 100644 --- a/drivers/net/ethernet/freescale/gianfar_ethtool.c +++ b/drivers/net/ethernet/freescale/gianfar_ethtool.c @@ -686,10 +686,21 @@ static int gfar_ethflow_to_filer_table(struct gfar_private *priv, u64 ethflow, u { unsigned int last_rule_idx = priv->cur_filer_idx; unsigned int cmp_rqfpr; - unsigned int local_rqfpr[MAX_FILER_IDX + 1]; - unsigned int local_rqfcr[MAX_FILER_IDX + 1]; + unsigned int *local_rqfpr; + unsigned int *local_rqfcr; int i = 0x0, k = 0x0; int j = MAX_FILER_IDX, l = 0x0; + int ret = 1; + + local_rqfpr = kmalloc(sizeof(unsigned int) * (MAX_FILER_IDX + 1), + GFP_KERNEL); + local_rqfcr = kmalloc(sizeof(unsigned int) * (MAX_FILER_IDX + 1), + GFP_KERNEL); + if (!local_rqfpr || !local_rqfcr) { + pr_err("Out of memory\n"); + ret = 0; + goto err; + } switch (class) { case TCP_V4_FLOW: @@ -706,7 +717,8 @@ static int gfar_ethflow_to_filer_table(struct gfar_private *priv, u64 ethflow, u break; default: pr_err("Right now this class is not supported\n"); - return 0; + ret = 0; + goto err; } for (i = 0; i < MAX_FILER_IDX + 1; i++) { @@ -721,7 +733,8 @@ static int gfar_ethflow_to_filer_table(struct gfar_private *priv, u64 ethflow, u if (i == MAX_FILER_IDX + 1) { pr_err("No parse rule found, can't create hash rules\n"); - return 0; + ret = 0; + goto err; } /* If a match was found, then it begins the starting of a cluster rule @@ -765,7 +778,10 @@ static int gfar_ethflow_to_filer_table(struct gfar_private *priv, u64 ethflow, u priv->cur_filer_idx = priv->cur_filer_idx - 1; } - return 1; +err: + kfree(local_rqfcr); + kfree(local_rqfpr); + return ret; } static int gfar_set_hash_opts(struct gfar_private *priv, struct ethtool_rxnfc *cmd) diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c index 480f2592f8a..536b3a55c45 100644 --- a/drivers/net/ethernet/intel/e1000e/82571.c +++ b/drivers/net/ethernet/intel/e1000e/82571.c @@ -2085,7 +2085,8 @@ struct e1000_info e1000_82574_info = { | FLAG_HAS_AMT | FLAG_HAS_CTRLEXT_ON_LOAD, .flags2 = FLAG2_CHECK_PHY_HANG - | FLAG2_DISABLE_ASPM_L0S, + | FLAG2_DISABLE_ASPM_L0S + | FLAG2_NO_DISABLE_RX, .pba = 32, .max_hw_frame_size = DEFAULT_JUMBO, .get_variants = e1000_get_variants_82571, @@ -2104,7 +2105,8 @@ struct e1000_info e1000_82583_info = { | FLAG_HAS_AMT | FLAG_HAS_JUMBO_FRAMES | FLAG_HAS_CTRLEXT_ON_LOAD, - .flags2 = FLAG2_DISABLE_ASPM_L0S, + .flags2 = FLAG2_DISABLE_ASPM_L0S + | FLAG2_NO_DISABLE_RX, .pba = 32, .max_hw_frame_size = DEFAULT_JUMBO, .get_variants = e1000_get_variants_82571, diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h index 638d175792c..8533ad7f355 100644 --- a/drivers/net/ethernet/intel/e1000e/e1000.h +++ b/drivers/net/ethernet/intel/e1000e/e1000.h @@ -155,6 +155,9 @@ struct e1000_info; #define HV_M_STATUS_SPEED_1000 0x0200 #define HV_M_STATUS_LINK_UP 0x0040 +#define E1000_ICH_FWSM_PCIM2PCI 0x01000000 /* ME PCIm-to-PCI active */ +#define E1000_ICH_FWSM_PCIM2PCI_COUNT 2000 + /* Time to wait before putting the device into D3 if there's no link (in ms). */ #define LINK_TIMEOUT 100 @@ -453,6 +456,8 @@ struct e1000_info { #define FLAG2_DISABLE_ASPM_L0S (1 << 7) #define FLAG2_DISABLE_AIM (1 << 8) #define FLAG2_CHECK_PHY_HANG (1 << 9) +#define FLAG2_NO_DISABLE_RX (1 << 10) +#define FLAG2_PCIM2PCI_ARBITER_WA (1 << 11) #define E1000_RX_DESC_PS(R, i) \ (&(((union e1000_rx_desc_packet_split *)((R).desc))[i])) diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c index 06d88f316dc..6a0526a59a8 100644 --- a/drivers/net/ethernet/intel/e1000e/ethtool.c +++ b/drivers/net/ethernet/intel/e1000e/ethtool.c @@ -1206,7 +1206,8 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter) rx_ring->next_to_clean = 0; rctl = er32(RCTL); - ew32(RCTL, rctl & ~E1000_RCTL_EN); + if (!(adapter->flags2 & FLAG2_NO_DISABLE_RX)) + ew32(RCTL, rctl & ~E1000_RCTL_EN); ew32(RDBAL, ((u64) rx_ring->dma & 0xFFFFFFFF)); ew32(RDBAH, ((u64) rx_ring->dma >> 32)); ew32(RDLEN, rx_ring->size); diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 4e36978b8fd..54add27c8f7 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -137,8 +137,9 @@ #define HV_PM_CTRL PHY_REG(770, 17) /* PHY Low Power Idle Control */ -#define I82579_LPI_CTRL PHY_REG(772, 20) -#define I82579_LPI_CTRL_ENABLE_MASK 0x6000 +#define I82579_LPI_CTRL PHY_REG(772, 20) +#define I82579_LPI_CTRL_ENABLE_MASK 0x6000 +#define I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT 0x80 /* EMI Registers */ #define I82579_EMI_ADDR 0x10 @@ -163,6 +164,11 @@ #define HV_KMRN_MODE_CTRL PHY_REG(769, 16) #define HV_KMRN_MDIO_SLOW 0x0400 +/* KMRN FIFO Control and Status */ +#define HV_KMRN_FIFO_CTRLSTA PHY_REG(770, 16) +#define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_MASK 0x7000 +#define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_SHIFT 12 + /* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */ /* Offset 04h HSFSTS */ union ich8_hws_flash_status { @@ -657,6 +663,7 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) struct e1000_mac_info *mac = &hw->mac; s32 ret_val; bool link; + u16 phy_reg; /* * We only want to go out to the PHY registers to see if Auto-Neg @@ -689,16 +696,35 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) mac->get_link_status = false; - if (hw->phy.type == e1000_phy_82578) { - ret_val = e1000_link_stall_workaround_hv(hw); - if (ret_val) - goto out; - } - - if (hw->mac.type == e1000_pch2lan) { + switch (hw->mac.type) { + case e1000_pch2lan: ret_val = e1000_k1_workaround_lv(hw); if (ret_val) goto out; + /* fall-thru */ + case e1000_pchlan: + if (hw->phy.type == e1000_phy_82578) { + ret_val = e1000_link_stall_workaround_hv(hw); + if (ret_val) + goto out; + } + + /* + * Workaround for PCHx parts in half-duplex: + * Set the number of preambles removed from the packet + * when it is passed from the PHY to the MAC to prevent + * the MAC from misinterpreting the packet type. + */ + e1e_rphy(hw, HV_KMRN_FIFO_CTRLSTA, &phy_reg); + phy_reg &= ~HV_KMRN_FIFO_CTRLSTA_PREAMBLE_MASK; + + if ((er32(STATUS) & E1000_STATUS_FD) != E1000_STATUS_FD) + phy_reg |= (1 << HV_KMRN_FIFO_CTRLSTA_PREAMBLE_SHIFT); + + e1e_wphy(hw, HV_KMRN_FIFO_CTRLSTA, phy_reg); + break; + default: + break; } /* @@ -788,6 +814,11 @@ static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter) (adapter->hw.phy.type == e1000_phy_igp_3)) adapter->flags |= FLAG_LSC_GIG_SPEED_DROP; + /* Enable workaround for 82579 w/ ME enabled */ + if ((adapter->hw.mac.type == e1000_pch2lan) && + (er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) + adapter->flags2 |= FLAG2_PCIM2PCI_ARBITER_WA; + /* Disable EEE by default until IEEE802.3az spec is finalized */ if (adapter->flags2 & FLAG2_HAS_EEE) adapter->hw.dev_spec.ich8lan.eee_disable = true; @@ -1355,7 +1386,7 @@ static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw) return ret_val; /* Preamble tuning for SSC */ - ret_val = e1e_wphy(hw, PHY_REG(770, 16), 0xA204); + ret_val = e1e_wphy(hw, HV_KMRN_FIFO_CTRLSTA, 0xA204); if (ret_val) return ret_val; } @@ -1645,6 +1676,7 @@ static s32 e1000_k1_workaround_lv(struct e1000_hw *hw) s32 ret_val = 0; u16 status_reg = 0; u32 mac_reg; + u16 phy_reg; if (hw->mac.type != e1000_pch2lan) goto out; @@ -1659,12 +1691,19 @@ static s32 e1000_k1_workaround_lv(struct e1000_hw *hw) mac_reg = er32(FEXTNVM4); mac_reg &= ~E1000_FEXTNVM4_BEACON_DURATION_MASK; - if (status_reg & HV_M_STATUS_SPEED_1000) + ret_val = e1e_rphy(hw, I82579_LPI_CTRL, &phy_reg); + if (ret_val) + goto out; + + if (status_reg & HV_M_STATUS_SPEED_1000) { mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_8USEC; - else + phy_reg &= ~I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT; + } else { mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_16USEC; - + phy_reg |= I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT; + } ew32(FEXTNVM4, mac_reg); + ret_val = e1e_wphy(hw, I82579_LPI_CTRL, phy_reg); } out: diff --git a/drivers/net/ethernet/intel/e1000e/lib.c b/drivers/net/ethernet/intel/e1000e/lib.c index 7898a67d650..0893ab107ad 100644 --- a/drivers/net/ethernet/intel/e1000e/lib.c +++ b/drivers/net/ethernet/intel/e1000e/lib.c @@ -190,7 +190,8 @@ s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw) /* Check for LOM (vs. NIC) or one of two valid mezzanine cards */ if (!((nvm_data & NVM_COMPAT_LOM) || (hw->adapter->pdev->device == E1000_DEV_ID_82571EB_SERDES_DUAL) || - (hw->adapter->pdev->device == E1000_DEV_ID_82571EB_SERDES_QUAD))) + (hw->adapter->pdev->device == E1000_DEV_ID_82571EB_SERDES_QUAD) || + (hw->adapter->pdev->device == E1000_DEV_ID_82571EB_SERDES))) goto out; ret_val = e1000_read_nvm(hw, NVM_ALT_MAC_ADDR_PTR, 1, @@ -200,10 +201,10 @@ s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw) goto out; } - if (nvm_alt_mac_addr_offset == 0xFFFF) { + if ((nvm_alt_mac_addr_offset == 0xFFFF) || + (nvm_alt_mac_addr_offset == 0x0000)) /* There is no Alternate MAC Address */ goto out; - } if (hw->bus.func == E1000_FUNC_1) nvm_alt_mac_addr_offset += E1000_ALT_MAC_ADDRESS_OFFSET_LAN1; diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index d0fdb512e84..b1f925bfb8b 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -56,7 +56,7 @@ #define DRV_EXTRAVERSION "-k" -#define DRV_VERSION "1.3.16" DRV_EXTRAVERSION +#define DRV_VERSION "1.4.4" DRV_EXTRAVERSION char e1000e_driver_name[] = "e1000e"; const char e1000e_driver_version[] = DRV_VERSION; @@ -519,6 +519,63 @@ static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err, } /** + * e1000e_update_tail_wa - helper function for e1000e_update_[rt]dt_wa() + * @hw: pointer to the HW structure + * @tail: address of tail descriptor register + * @i: value to write to tail descriptor register + * + * When updating the tail register, the ME could be accessing Host CSR + * registers at the same time. Normally, this is handled in h/w by an + * arbiter but on some parts there is a bug that acknowledges Host accesses + * later than it should which could result in the descriptor register to + * have an incorrect value. Workaround this by checking the FWSM register + * which has bit 24 set while ME is accessing Host CSR registers, wait + * if it is set and try again a number of times. + **/ +static inline s32 e1000e_update_tail_wa(struct e1000_hw *hw, u8 __iomem * tail, + unsigned int i) +{ + unsigned int j = 0; + + while ((j++ < E1000_ICH_FWSM_PCIM2PCI_COUNT) && + (er32(FWSM) & E1000_ICH_FWSM_PCIM2PCI)) + udelay(50); + + writel(i, tail); + + if ((j == E1000_ICH_FWSM_PCIM2PCI_COUNT) && (i != readl(tail))) + return E1000_ERR_SWFW_SYNC; + + return 0; +} + +static void e1000e_update_rdt_wa(struct e1000_adapter *adapter, unsigned int i) +{ + u8 __iomem *tail = (adapter->hw.hw_addr + adapter->rx_ring->tail); + struct e1000_hw *hw = &adapter->hw; + + if (e1000e_update_tail_wa(hw, tail, i)) { + u32 rctl = er32(RCTL); + ew32(RCTL, rctl & ~E1000_RCTL_EN); + e_err("ME firmware caused invalid RDT - resetting\n"); + schedule_work(&adapter->reset_task); + } +} + +static void e1000e_update_tdt_wa(struct e1000_adapter *adapter, unsigned int i) +{ + u8 __iomem *tail = (adapter->hw.hw_addr + adapter->tx_ring->tail); + struct e1000_hw *hw = &adapter->hw; + + if (e1000e_update_tail_wa(hw, tail, i)) { + u32 tctl = er32(TCTL); + ew32(TCTL, tctl & ~E1000_TCTL_EN); + e_err("ME firmware caused invalid TDT - resetting\n"); + schedule_work(&adapter->reset_task); + } +} + +/** * e1000_alloc_rx_buffers - Replace used receive buffers; legacy & extended * @adapter: address of board private structure **/ @@ -573,7 +630,10 @@ map_skb: * such as IA-64). */ wmb(); - writel(i, adapter->hw.hw_addr + rx_ring->tail); + if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) + e1000e_update_rdt_wa(adapter, i); + else + writel(i, adapter->hw.hw_addr + rx_ring->tail); } i++; if (i == rx_ring->count) @@ -673,7 +733,11 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter, * such as IA-64). */ wmb(); - writel(i << 1, adapter->hw.hw_addr + rx_ring->tail); + if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) + e1000e_update_rdt_wa(adapter, i << 1); + else + writel(i << 1, + adapter->hw.hw_addr + rx_ring->tail); } i++; @@ -756,7 +820,10 @@ check_page: * applicable for weak-ordered memory model archs, * such as IA-64). */ wmb(); - writel(i, adapter->hw.hw_addr + rx_ring->tail); + if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) + e1000e_update_rdt_wa(adapter, i); + else + writel(i, adapter->hw.hw_addr + rx_ring->tail); } } @@ -2915,7 +2982,8 @@ static void e1000_configure_rx(struct e1000_adapter *adapter) /* disable receives while setting up the descriptors */ rctl = er32(RCTL); - ew32(RCTL, rctl & ~E1000_RCTL_EN); + if (!(adapter->flags2 & FLAG2_NO_DISABLE_RX)) + ew32(RCTL, rctl & ~E1000_RCTL_EN); e1e_flush(); usleep_range(10000, 20000); @@ -3394,7 +3462,8 @@ void e1000e_down(struct e1000_adapter *adapter) /* disable receives in the hardware */ rctl = er32(RCTL); - ew32(RCTL, rctl & ~E1000_RCTL_EN); + if (!(adapter->flags2 & FLAG2_NO_DISABLE_RX)) + ew32(RCTL, rctl & ~E1000_RCTL_EN); /* flush and sleep below */ netif_stop_queue(netdev); @@ -3403,6 +3472,7 @@ void e1000e_down(struct e1000_adapter *adapter) tctl = er32(TCTL); tctl &= ~E1000_TCTL_EN; ew32(TCTL, tctl); + /* flush both disables and wait for them to finish */ e1e_flush(); usleep_range(10000, 20000); @@ -4686,7 +4756,12 @@ static void e1000_tx_queue(struct e1000_adapter *adapter, wmb(); tx_ring->next_to_use = i; - writel(i, adapter->hw.hw_addr + tx_ring->tail); + + if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) + e1000e_update_tdt_wa(adapter, i); + else + writel(i, adapter->hw.hw_addr + tx_ring->tail); + /* * we need this if more than one processor can write to our tail * at a time, it synchronizes IO on IA64/Altix systems diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index faa83cea733..b73194c1c44 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -1460,8 +1460,10 @@ static void ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector, if (ixgbe_rx_is_fcoe(adapter, rx_desc)) { ddp_bytes = ixgbe_fcoe_ddp(adapter, rx_desc, skb, staterr); - if (!ddp_bytes) + if (!ddp_bytes) { + dev_kfree_skb_any(skb); goto next_desc; + } } #endif /* IXGBE_FCOE */ ixgbe_receive_skb(q_vector, skb, staterr, rx_ring, rx_desc); diff --git a/drivers/net/ethernet/nvidia/forcedeth.c b/drivers/net/ethernet/nvidia/forcedeth.c index 3784a727692..98bb64bc24d 100644 --- a/drivers/net/ethernet/nvidia/forcedeth.c +++ b/drivers/net/ethernet/nvidia/forcedeth.c @@ -5615,7 +5615,8 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i goto out_error; } - nv_vlan_mode(dev, dev->features); + if (id->driver_data & DEV_HAS_VLAN) + nv_vlan_mode(dev, dev->features); netif_carrier_off(dev); diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index ef3a3521b83..bf2404ae3b8 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -21,6 +21,7 @@ */ #include <linux/init.h> +#include <linux/interrupt.h> #include <linux/dma-mapping.h> #include <linux/etherdevice.h> #include <linux/delay.h> diff --git a/drivers/net/ethernet/via/via-velocity.c b/drivers/net/ethernet/via/via-velocity.c index 095ab566d08..086463b141b 100644 --- a/drivers/net/ethernet/via/via-velocity.c +++ b/drivers/net/ethernet/via/via-velocity.c @@ -513,10 +513,6 @@ static void velocity_init_cam_filter(struct velocity_info *vptr) mac_set_cam_mask(regs, vptr->mCAMmask); /* Enable VCAMs */ - - if (test_bit(0, vptr->active_vlans)) - WORD_REG_BITS_ON(MCFG_RTGOPT, ®s->MCFG); - for_each_set_bit(vid, vptr->active_vlans, VLAN_N_VID) { mac_set_vlan_cam(regs, i, (u8 *) &vid); vptr->vCAMmask[i / 8] |= 0x1 << (i % 8); diff --git a/drivers/net/irda/sh_irda.c b/drivers/net/irda/sh_irda.c index 4488bd581ec..82660672dcd 100644 --- a/drivers/net/irda/sh_irda.c +++ b/drivers/net/irda/sh_irda.c @@ -22,6 +22,8 @@ * - DMA transfer support * - FIFO mode support */ +#include <linux/io.h> +#include <linux/interrupt.h> #include <linux/module.h> #include <linux/platform_device.h> #include <linux/clk.h> diff --git a/drivers/net/irda/sh_sir.c b/drivers/net/irda/sh_sir.c index 52a7c86af66..ed7d7d62bf6 100644 --- a/drivers/net/irda/sh_sir.c +++ b/drivers/net/irda/sh_sir.c @@ -12,6 +12,8 @@ * published by the Free Software Foundation. */ +#include <linux/io.h> +#include <linux/interrupt.h> #include <linux/module.h> #include <linux/platform_device.h> #include <linux/slab.h> @@ -511,7 +513,7 @@ static void sh_sir_tx(struct sh_sir_self *self, int phase) static int sh_sir_read_data(struct sh_sir_self *self) { - u16 val; + u16 val = 0; int timeout = 1024; while (timeout--) { diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index a03336e086d..f06fb78383a 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -228,23 +228,40 @@ static u8 cdc_ncm_setup(struct cdc_ncm_ctx *ctx) if (ctx->rx_max != le32_to_cpu(ctx->ncm_parm.dwNtbInMaxSize)) { if (flags & USB_CDC_NCM_NCAP_NTB_INPUT_SIZE) { - struct usb_cdc_ncm_ndp_input_size ndp_in_sz; + struct usb_cdc_ncm_ndp_input_size *ndp_in_sz; + + ndp_in_sz = kzalloc(sizeof(*ndp_in_sz), GFP_KERNEL); + if (!ndp_in_sz) { + err = -ENOMEM; + goto size_err; + } + err = usb_control_msg(ctx->udev, usb_sndctrlpipe(ctx->udev, 0), USB_CDC_SET_NTB_INPUT_SIZE, USB_TYPE_CLASS | USB_DIR_OUT | USB_RECIP_INTERFACE, - 0, iface_no, &ndp_in_sz, 8, 1000); + 0, iface_no, ndp_in_sz, 8, 1000); + kfree(ndp_in_sz); } else { - __le32 dwNtbInMaxSize = cpu_to_le32(ctx->rx_max); + __le32 *dwNtbInMaxSize; + dwNtbInMaxSize = kzalloc(sizeof(*dwNtbInMaxSize), + GFP_KERNEL); + if (!dwNtbInMaxSize) { + err = -ENOMEM; + goto size_err; + } + *dwNtbInMaxSize = cpu_to_le32(ctx->rx_max); + err = usb_control_msg(ctx->udev, usb_sndctrlpipe(ctx->udev, 0), USB_CDC_SET_NTB_INPUT_SIZE, USB_TYPE_CLASS | USB_DIR_OUT | USB_RECIP_INTERFACE, - 0, iface_no, &dwNtbInMaxSize, 4, 1000); + 0, iface_no, dwNtbInMaxSize, 4, 1000); + kfree(dwNtbInMaxSize); } - +size_err: if (err < 0) pr_debug("Setting NTB Input Size failed\n"); } @@ -325,19 +342,29 @@ static u8 cdc_ncm_setup(struct cdc_ncm_ctx *ctx) /* set Max Datagram Size (MTU) */ if (flags & USB_CDC_NCM_NCAP_MAX_DATAGRAM_SIZE) { - __le16 max_datagram_size; + __le16 *max_datagram_size; u16 eth_max_sz = le16_to_cpu(ctx->ether_desc->wMaxSegmentSize); + + max_datagram_size = kzalloc(sizeof(*max_datagram_size), + GFP_KERNEL); + if (!max_datagram_size) { + err = -ENOMEM; + goto max_dgram_err; + } + err = usb_control_msg(ctx->udev, usb_rcvctrlpipe(ctx->udev, 0), USB_CDC_GET_MAX_DATAGRAM_SIZE, USB_TYPE_CLASS | USB_DIR_IN | USB_RECIP_INTERFACE, - 0, iface_no, &max_datagram_size, + 0, iface_no, max_datagram_size, 2, 1000); if (err < 0) { pr_debug("GET_MAX_DATAGRAM_SIZE failed, use size=%u\n", CDC_NCM_MIN_DATAGRAM_SIZE); + kfree(max_datagram_size); } else { - ctx->max_datagram_size = le16_to_cpu(max_datagram_size); + ctx->max_datagram_size = + le16_to_cpu(*max_datagram_size); /* Check Eth descriptor value */ if (eth_max_sz < CDC_NCM_MAX_DATAGRAM_SIZE) { if (ctx->max_datagram_size > eth_max_sz) @@ -360,8 +387,10 @@ static u8 cdc_ncm_setup(struct cdc_ncm_ctx *ctx) USB_TYPE_CLASS | USB_DIR_OUT | USB_RECIP_INTERFACE, 0, - iface_no, &max_datagram_size, + iface_no, max_datagram_size, 2, 1000); + kfree(max_datagram_size); +max_dgram_err: if (err < 0) pr_debug("SET_MAX_DATAGRAM_SIZE failed\n"); } diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index f530c57151b..759c1a49cc7 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -1929,14 +1929,17 @@ static void vmxnet3_vlan_rx_add_vid(struct net_device *netdev, u16 vid) { struct vmxnet3_adapter *adapter = netdev_priv(netdev); - u32 *vfTable = adapter->shared->devRead.rxFilterConf.vfTable; - unsigned long flags; - VMXNET3_SET_VFTABLE_ENTRY(vfTable, vid); - spin_lock_irqsave(&adapter->cmd_lock, flags); - VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, - VMXNET3_CMD_UPDATE_VLAN_FILTERS); - spin_unlock_irqrestore(&adapter->cmd_lock, flags); + if (!(netdev->flags & IFF_PROMISC)) { + u32 *vfTable = adapter->shared->devRead.rxFilterConf.vfTable; + unsigned long flags; + + VMXNET3_SET_VFTABLE_ENTRY(vfTable, vid); + spin_lock_irqsave(&adapter->cmd_lock, flags); + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, + VMXNET3_CMD_UPDATE_VLAN_FILTERS); + spin_unlock_irqrestore(&adapter->cmd_lock, flags); + } set_bit(vid, adapter->active_vlans); } @@ -1946,14 +1949,17 @@ static void vmxnet3_vlan_rx_kill_vid(struct net_device *netdev, u16 vid) { struct vmxnet3_adapter *adapter = netdev_priv(netdev); - u32 *vfTable = adapter->shared->devRead.rxFilterConf.vfTable; - unsigned long flags; - VMXNET3_CLEAR_VFTABLE_ENTRY(vfTable, vid); - spin_lock_irqsave(&adapter->cmd_lock, flags); - VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, - VMXNET3_CMD_UPDATE_VLAN_FILTERS); - spin_unlock_irqrestore(&adapter->cmd_lock, flags); + if (!(netdev->flags & IFF_PROMISC)) { + u32 *vfTable = adapter->shared->devRead.rxFilterConf.vfTable; + unsigned long flags; + + VMXNET3_CLEAR_VFTABLE_ENTRY(vfTable, vid); + spin_lock_irqsave(&adapter->cmd_lock, flags); + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, + VMXNET3_CMD_UPDATE_VLAN_FILTERS); + spin_unlock_irqrestore(&adapter->cmd_lock, flags); + } clear_bit(vid, adapter->active_vlans); } diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index f54dff44ed5..c3119a6caac 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -1735,6 +1735,8 @@ ath5k_beacon_setup(struct ath5k_hw *ah, struct ath5k_buf *bf) if (dma_mapping_error(ah->dev, bf->skbaddr)) { ATH5K_ERR(ah, "beacon DMA mapping failed\n"); + dev_kfree_skb_any(skb); + bf->skb = NULL; return -EIO; } @@ -1819,8 +1821,6 @@ ath5k_beacon_update(struct ieee80211_hw *hw, struct ieee80211_vif *vif) ath5k_txbuf_free_skb(ah, avf->bbuf); avf->bbuf->skb = skb; ret = ath5k_beacon_setup(ah, avf->bbuf); - if (ret) - avf->bbuf->skb = NULL; out: return ret; } @@ -1840,6 +1840,7 @@ ath5k_beacon_send(struct ath5k_hw *ah) struct ath5k_vif *avf; struct ath5k_buf *bf; struct sk_buff *skb; + int err; ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_BEACON, "in beacon_send\n"); @@ -1888,11 +1889,6 @@ ath5k_beacon_send(struct ath5k_hw *ah) avf = (void *)vif->drv_priv; bf = avf->bbuf; - if (unlikely(bf->skb == NULL || ah->opmode == NL80211_IFTYPE_STATION || - ah->opmode == NL80211_IFTYPE_MONITOR)) { - ATH5K_WARN(ah, "bf=%p bf_skb=%p\n", bf, bf ? bf->skb : NULL); - return; - } /* * Stop any current dma and put the new frame on the queue. @@ -1906,8 +1902,17 @@ ath5k_beacon_send(struct ath5k_hw *ah) /* refresh the beacon for AP or MESH mode */ if (ah->opmode == NL80211_IFTYPE_AP || - ah->opmode == NL80211_IFTYPE_MESH_POINT) - ath5k_beacon_update(ah->hw, vif); + ah->opmode == NL80211_IFTYPE_MESH_POINT) { + err = ath5k_beacon_update(ah->hw, vif); + if (err) + return; + } + + if (unlikely(bf->skb == NULL || ah->opmode == NL80211_IFTYPE_STATION || + ah->opmode == NL80211_IFTYPE_MONITOR)) { + ATH5K_WARN(ah, "bf=%p bf_skb=%p\n", bf, bf->skb); + return; + } trace_ath5k_tx(ah, bf->skb, &ah->txqs[ah->bhalq]); diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c index d109c25417f..c34bef1bf2b 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c @@ -307,7 +307,7 @@ static const struct ar9300_eeprom ar9300_default = { { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, { { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 1) } }, - { { CTL(60, 1), CTL(60, 0), CTL(0, 0), CTL(0, 0) } }, + { { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0) } }, { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, @@ -884,7 +884,7 @@ static const struct ar9300_eeprom ar9300_x113 = { { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, { { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 1) } }, - { { CTL(60, 1), CTL(60, 0), CTL(0, 0), CTL(0, 0) } }, + { { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0) } }, { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, @@ -2040,7 +2040,7 @@ static const struct ar9300_eeprom ar9300_x112 = { { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, { { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 1) } }, - { { CTL(60, 1), CTL(60, 0), CTL(0, 0), CTL(0, 0) } }, + { { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0) } }, { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, @@ -3734,7 +3734,7 @@ static void ar9003_hw_internal_regulator_apply(struct ath_hw *ah) } } else { reg_pmu_set = (5 << 1) | (7 << 4) | - (1 << 8) | (2 << 14) | + (2 << 8) | (2 << 14) | (6 << 17) | (1 << 20) | (3 << 24) | (1 << 28); } diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.h b/drivers/net/wireless/ath/ath9k/ar9003_phy.h index 6de3f0bc18e..5c590429f12 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h @@ -850,7 +850,7 @@ #define AR_PHY_TPC_11_B1 (AR_SM1_BASE + 0x220) #define AR_PHY_PDADC_TAB_1 (AR_SM1_BASE + 0x240) #define AR_PHY_TX_IQCAL_STATUS_B1 (AR_SM1_BASE + 0x48c) -#define AR_PHY_TX_IQCAL_CORR_COEFF_B1(_i) (AR_SM_BASE + 0x450 + ((_i) << 2)) +#define AR_PHY_TX_IQCAL_CORR_COEFF_B1(_i) (AR_SM1_BASE + 0x450 + ((_i) << 2)) /* * Channel 2 Register Map diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c index 83cba22ac6e..481e534534e 100644 --- a/drivers/net/wireless/b43/dma.c +++ b/drivers/net/wireless/b43/dma.c @@ -795,9 +795,23 @@ static u64 supported_dma_mask(struct b43_wldev *dev) u32 tmp; u16 mmio_base; - tmp = b43_read32(dev, SSB_TMSHIGH); - if (tmp & SSB_TMSHIGH_DMA64) - return DMA_BIT_MASK(64); + switch (dev->dev->bus_type) { +#ifdef CONFIG_B43_BCMA + case B43_BUS_BCMA: + tmp = bcma_aread32(dev->dev->bdev, BCMA_IOST); + if (tmp & BCMA_IOST_DMA64) + return DMA_BIT_MASK(64); + break; +#endif +#ifdef CONFIG_B43_SSB + case B43_BUS_SSB: + tmp = ssb_read32(dev->dev->sdev, SSB_TMSHIGH); + if (tmp & SSB_TMSHIGH_DMA64) + return DMA_BIT_MASK(64); + break; +#endif + } + mmio_base = b43_dmacontroller_base(0, 0); b43_write32(dev, mmio_base + B43_DMA32_TXCTL, B43_DMA32_TXADDREXT_MASK); tmp = b43_read32(dev, mmio_base + B43_DMA32_TXCTL); diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index 507559361d8..939563162fb 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -921,6 +921,8 @@ static struct usb_device_id rt2800usb_device_table[] = { { USB_DEVICE(0x07d1, 0x3c16) }, /* Draytek */ { USB_DEVICE(0x07fa, 0x7712) }, + /* DVICO */ + { USB_DEVICE(0x0fe9, 0xb307) }, /* Edimax */ { USB_DEVICE(0x7392, 0x7711) }, { USB_DEVICE(0x7392, 0x7717) }, diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index 6a93939f44e..0baeb894f09 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -2420,6 +2420,7 @@ static struct usb_device_id rt73usb_device_table[] = { /* Buffalo */ { USB_DEVICE(0x0411, 0x00d8) }, { USB_DEVICE(0x0411, 0x00d9) }, + { USB_DEVICE(0x0411, 0x00e6) }, { USB_DEVICE(0x0411, 0x00f4) }, { USB_DEVICE(0x0411, 0x0116) }, { USB_DEVICE(0x0411, 0x0119) }, diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c index 942f7a3969a..ef63c0df006 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c @@ -281,6 +281,8 @@ static struct usb_device_id rtl8192c_usb_ids[] = { {RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x817d, rtl92cu_hal_cfg)}, /* 8188CE-VAU USB minCard (b/g mode only) */ {RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x817e, rtl92cu_hal_cfg)}, + /* 8188RU in Alfa AWUS036NHR */ + {RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x817f, rtl92cu_hal_cfg)}, /* 8188 Combo for BC4 */ {RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8754, rtl92cu_hal_cfg)}, @@ -303,20 +305,23 @@ static struct usb_device_id rtl8192c_usb_ids[] = { {RTL_USB_DEVICE(0x0eb0, 0x9071, rtl92cu_hal_cfg)}, /*NO Brand - Etop*/ /* HP - Lite-On ,8188CUS Slim Combo */ {RTL_USB_DEVICE(0x103c, 0x1629, rtl92cu_hal_cfg)}, + {RTL_USB_DEVICE(0x13d3, 0x3357, rtl92cu_hal_cfg)}, /* AzureWave */ {RTL_USB_DEVICE(0x2001, 0x3308, rtl92cu_hal_cfg)}, /*D-Link - Alpha*/ {RTL_USB_DEVICE(0x2019, 0xab2a, rtl92cu_hal_cfg)}, /*Planex - Abocom*/ {RTL_USB_DEVICE(0x2019, 0xed17, rtl92cu_hal_cfg)}, /*PCI - Edimax*/ {RTL_USB_DEVICE(0x20f4, 0x648b, rtl92cu_hal_cfg)}, /*TRENDnet - Cameo*/ {RTL_USB_DEVICE(0x7392, 0x7811, rtl92cu_hal_cfg)}, /*Edimax - Edimax*/ - {RTL_USB_DEVICE(0x3358, 0x13d3, rtl92cu_hal_cfg)}, /*Azwave 8188CE-VAU*/ + {RTL_USB_DEVICE(0x13d3, 0x3358, rtl92cu_hal_cfg)}, /*Azwave 8188CE-VAU*/ /* Russian customer -Azwave (8188CE-VAU b/g mode only) */ - {RTL_USB_DEVICE(0x3359, 0x13d3, rtl92cu_hal_cfg)}, + {RTL_USB_DEVICE(0x13d3, 0x3359, rtl92cu_hal_cfg)}, + {RTL_USB_DEVICE(0x4855, 0x0090, rtl92cu_hal_cfg)}, /* Feixun */ + {RTL_USB_DEVICE(0x4855, 0x0091, rtl92cu_hal_cfg)}, /* NetweeN-Feixun */ + {RTL_USB_DEVICE(0x9846, 0x9041, rtl92cu_hal_cfg)}, /* Netgear Cameo */ /****** 8192CU ********/ {RTL_USB_DEVICE(0x0586, 0x341f, rtl92cu_hal_cfg)}, /*Zyxel -Abocom*/ {RTL_USB_DEVICE(0x07aa, 0x0056, rtl92cu_hal_cfg)}, /*ATKK-Gemtek*/ {RTL_USB_DEVICE(0x07b8, 0x8178, rtl92cu_hal_cfg)}, /*Funai -Abocom*/ - {RTL_USB_DEVICE(0x07b8, 0x8178, rtl92cu_hal_cfg)}, /*Abocom -Abocom*/ {RTL_USB_DEVICE(0x2001, 0x3307, rtl92cu_hal_cfg)}, /*D-Link-Cameo*/ {RTL_USB_DEVICE(0x2001, 0x3309, rtl92cu_hal_cfg)}, /*D-Link-Alpha*/ {RTL_USB_DEVICE(0x2001, 0x330a, rtl92cu_hal_cfg)}, /*D-Link-Alpha*/ diff --git a/drivers/net/wireless/wl1251/acx.c b/drivers/net/wireless/wl1251/acx.c index ef8370edace..ad87a1ac646 100644 --- a/drivers/net/wireless/wl1251/acx.c +++ b/drivers/net/wireless/wl1251/acx.c @@ -140,8 +140,6 @@ int wl1251_acx_sleep_auth(struct wl1251 *wl, u8 sleep_auth) auth->sleep_auth = sleep_auth; ret = wl1251_cmd_configure(wl, ACX_SLEEP_AUTH, auth, sizeof(*auth)); - if (ret < 0) - return ret; out: kfree(auth); @@ -681,10 +679,8 @@ int wl1251_acx_cca_threshold(struct wl1251 *wl) ret = wl1251_cmd_configure(wl, ACX_CCA_THRESHOLD, detection, sizeof(*detection)); - if (ret < 0) { + if (ret < 0) wl1251_warning("failed to set cca threshold: %d", ret); - return ret; - } out: kfree(detection); diff --git a/drivers/net/wireless/wl1251/cmd.c b/drivers/net/wireless/wl1251/cmd.c index 81f164bc488..d14d69d733a 100644 --- a/drivers/net/wireless/wl1251/cmd.c +++ b/drivers/net/wireless/wl1251/cmd.c @@ -241,7 +241,7 @@ int wl1251_cmd_data_path(struct wl1251 *wl, u8 channel, bool enable) if (ret < 0) { wl1251_error("tx %s cmd for channel %d failed", enable ? "start" : "stop", channel); - return ret; + goto out; } wl1251_debug(DEBUG_BOOT, "tx %s cmd channel %d", diff --git a/drivers/staging/ath6kl/miscdrv/ar3kps/ar3kpsparser.c b/drivers/staging/ath6kl/miscdrv/ar3kps/ar3kpsparser.c index c01c0cb0af4..b99a11a9dd6 100644 --- a/drivers/staging/ath6kl/miscdrv/ar3kps/ar3kpsparser.c +++ b/drivers/staging/ath6kl/miscdrv/ar3kps/ar3kpsparser.c @@ -812,7 +812,7 @@ int AthCreateCommandList(struct ps_cmd_packet **HciPacketList, u32 *numPackets) for(count = 0; count < Patch_Count; count++) { AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Freeing Patch Buffer %d \r\n",count)); - kfree(RamPatch[Patch_Count].Data); + kfree(RamPatch[count].Data); } for(count = 0; count < Tag_Count; count++) { diff --git a/drivers/staging/dt3155v4l/dt3155v4l.c b/drivers/staging/dt3155v4l/dt3155v4l.c index fe02d22274b..05aa41cf875 100644 --- a/drivers/staging/dt3155v4l/dt3155v4l.c +++ b/drivers/staging/dt3155v4l/dt3155v4l.c @@ -22,6 +22,7 @@ #include <linux/stringify.h> #include <linux/delay.h> #include <linux/kthread.h> +#include <linux/slab.h> #include <media/v4l2-dev.h> #include <media/v4l2-ioctl.h> #include <media/videobuf2-dma-contig.h> diff --git a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_proc.c b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_proc.c index 627a98b4ec3..9e728b3415e 100644 --- a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_proc.c +++ b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_proc.c @@ -22,6 +22,7 @@ #include <linux/string.h> #include <linux/vmalloc.h> #include <linux/netdevice.h> +#include <asm/io.h> #include <asm/uaccess.h> #include "ft1000.h" diff --git a/drivers/staging/gma500/gem_glue.c b/drivers/staging/gma500/gem_glue.c index 779ac1a12d2..daac1212065 100644 --- a/drivers/staging/gma500/gem_glue.c +++ b/drivers/staging/gma500/gem_glue.c @@ -20,26 +20,6 @@ #include <drm/drmP.h> #include <drm/drm.h> -/** - * Initialize an already allocated GEM object of the specified size with - * no GEM provided backing store. Instead the caller is responsible for - * backing the object and handling it. - */ -int drm_gem_private_object_init(struct drm_device *dev, - struct drm_gem_object *obj, size_t size) -{ - BUG_ON((size & (PAGE_SIZE - 1)) != 0); - - obj->dev = dev; - obj->filp = NULL; - - kref_init(&obj->refcount); - atomic_set(&obj->handle_count, 0); - obj->size = size; - - return 0; -} - void drm_gem_object_release_wrap(struct drm_gem_object *obj) { /* Remove the list map if one is present */ @@ -51,8 +31,7 @@ void drm_gem_object_release_wrap(struct drm_gem_object *obj) kfree(list->map); list->map = NULL; } - if (obj->filp) - drm_gem_object_release(obj); + drm_gem_object_release(obj); } /** diff --git a/drivers/staging/gma500/gem_glue.h b/drivers/staging/gma500/gem_glue.h index a0f2bc4e4ae..ce5ce30f74d 100644 --- a/drivers/staging/gma500/gem_glue.h +++ b/drivers/staging/gma500/gem_glue.h @@ -1,4 +1,2 @@ extern void drm_gem_object_release_wrap(struct drm_gem_object *obj); -extern int drm_gem_private_object_init(struct drm_device *dev, - struct drm_gem_object *obj, size_t size); extern int gem_create_mmap_offset(struct drm_gem_object *obj); diff --git a/drivers/staging/hv/blkvsc_drv.c b/drivers/staging/hv/blkvsc_drv.c index 3612574ca52..d286b222318 100644 --- a/drivers/staging/hv/blkvsc_drv.c +++ b/drivers/staging/hv/blkvsc_drv.c @@ -325,7 +325,7 @@ static int blkvsc_do_operation(struct block_device_context *blkdev, page_buf = alloc_page(GFP_KERNEL); if (!page_buf) { - kmem_cache_free(blkvsc_req->dev->request_pool, blkvsc_req); + kmem_cache_free(blkdev->request_pool, blkvsc_req); return -ENOMEM; } @@ -422,7 +422,7 @@ cleanup: __free_page(page_buf); - kmem_cache_free(blkvsc_req->dev->request_pool, blkvsc_req); + kmem_cache_free(blkdev->request_pool, blkvsc_req); return ret; } diff --git a/drivers/staging/iio/accel/adis16203_core.c b/drivers/staging/iio/accel/adis16203_core.c index bf1988884e9..cf5d15da76a 100644 --- a/drivers/staging/iio/accel/adis16203_core.c +++ b/drivers/staging/iio/accel/adis16203_core.c @@ -311,13 +311,17 @@ static int adis16203_read_raw(struct iio_dev *indio_dev, mutex_lock(&indio_dev->mlock); addr = adis16203_addresses[chan->address][0]; ret = adis16203_spi_read_reg_16(indio_dev, addr, &val16); - if (ret) + if (ret) { + mutex_unlock(&indio_dev->mlock); return ret; + } if (val16 & ADIS16203_ERROR_ACTIVE) { ret = adis16203_check_status(indio_dev); - if (ret) + if (ret) { + mutex_unlock(&indio_dev->mlock); return ret; + } } val16 = val16 & ((1 << chan->scan_type.realbits) - 1); if (chan->scan_type.sign == 's') diff --git a/drivers/staging/iio/accel/adis16204_core.c b/drivers/staging/iio/accel/adis16204_core.c index cfd09b3b993..3e2b62654b7 100644 --- a/drivers/staging/iio/accel/adis16204_core.c +++ b/drivers/staging/iio/accel/adis16204_core.c @@ -341,13 +341,17 @@ static int adis16204_read_raw(struct iio_dev *indio_dev, mutex_lock(&indio_dev->mlock); addr = adis16204_addresses[chan->address][0]; ret = adis16204_spi_read_reg_16(indio_dev, addr, &val16); - if (ret) + if (ret) { + mutex_unlock(&indio_dev->mlock); return ret; + } if (val16 & ADIS16204_ERROR_ACTIVE) { ret = adis16204_check_status(indio_dev); - if (ret) + if (ret) { + mutex_unlock(&indio_dev->mlock); return ret; + } } val16 = val16 & ((1 << chan->scan_type.realbits) - 1); if (chan->scan_type.sign == 's') diff --git a/drivers/staging/iio/accel/adis16209_core.c b/drivers/staging/iio/accel/adis16209_core.c index 55f3a7bcaf0..bec1fa8de9b 100644 --- a/drivers/staging/iio/accel/adis16209_core.c +++ b/drivers/staging/iio/accel/adis16209_core.c @@ -337,13 +337,17 @@ static int adis16209_read_raw(struct iio_dev *indio_dev, mutex_lock(&indio_dev->mlock); addr = adis16209_addresses[chan->address][0]; ret = adis16209_spi_read_reg_16(indio_dev, addr, &val16); - if (ret) + if (ret) { + mutex_unlock(&indio_dev->mlock); return ret; + } if (val16 & ADIS16209_ERROR_ACTIVE) { ret = adis16209_check_status(indio_dev); - if (ret) + if (ret) { + mutex_unlock(&indio_dev->mlock); return ret; + } } val16 = val16 & ((1 << chan->scan_type.realbits) - 1); if (chan->scan_type.sign == 's') diff --git a/drivers/staging/iio/accel/adis16240_core.c b/drivers/staging/iio/accel/adis16240_core.c index 4a4eafc5863..aee8b69173c 100644 --- a/drivers/staging/iio/accel/adis16240_core.c +++ b/drivers/staging/iio/accel/adis16240_core.c @@ -370,13 +370,17 @@ static int adis16240_read_raw(struct iio_dev *indio_dev, mutex_lock(&indio_dev->mlock); addr = adis16240_addresses[chan->address][0]; ret = adis16240_spi_read_reg_16(indio_dev, addr, &val16); - if (ret) + if (ret) { + mutex_unlock(&indio_dev->mlock); return ret; + } if (val16 & ADIS16240_ERROR_ACTIVE) { ret = adis16240_check_status(indio_dev); - if (ret) + if (ret) { + mutex_unlock(&indio_dev->mlock); return ret; + } } val16 = val16 & ((1 << chan->scan_type.realbits) - 1); if (chan->scan_type.sign == 's') diff --git a/drivers/staging/iio/gyro/adis16260_core.c b/drivers/staging/iio/gyro/adis16260_core.c index 05797f404be..f2d43cfcc49 100644 --- a/drivers/staging/iio/gyro/adis16260_core.c +++ b/drivers/staging/iio/gyro/adis16260_core.c @@ -446,13 +446,17 @@ static int adis16260_read_raw(struct iio_dev *indio_dev, mutex_lock(&indio_dev->mlock); addr = adis16260_addresses[chan->address][0]; ret = adis16260_spi_read_reg_16(indio_dev, addr, &val16); - if (ret) + if (ret) { + mutex_unlock(&indio_dev->mlock); return ret; + } if (val16 & ADIS16260_ERROR_ACTIVE) { ret = adis16260_check_status(indio_dev); - if (ret) + if (ret) { + mutex_unlock(&indio_dev->mlock); return ret; + } } val16 = val16 & ((1 << chan->scan_type.realbits) - 1); if (chan->scan_type.sign == 's') diff --git a/drivers/staging/nvec/TODO b/drivers/staging/nvec/TODO index 77b47f763f2..649d6b70dea 100644 --- a/drivers/staging/nvec/TODO +++ b/drivers/staging/nvec/TODO @@ -4,5 +4,7 @@ ToDo list (incomplete, unordered) - add compile as module support - move nvec devices to mfd cells? - adjust to kernel style - - + - fix clk usage + should not be using clk_get_sys(), but clk_get(&pdev->dev, conn) + where conn is either NULL if the device only has one clock, or + the device specific name if it has multiple clocks. diff --git a/drivers/staging/rtl8192u/r819xU_firmware.c b/drivers/staging/rtl8192u/r819xU_firmware.c index 6766f468639..4bb5fffca5b 100644 --- a/drivers/staging/rtl8192u/r819xU_firmware.c +++ b/drivers/staging/rtl8192u/r819xU_firmware.c @@ -399,10 +399,7 @@ download_firmware_fail: } - - - - - - +MODULE_FIRMWARE("RTL8192U/boot.img"); +MODULE_FIRMWARE("RTL8192U/main.img"); +MODULE_FIRMWARE("RTL8192U/data.img"); diff --git a/drivers/staging/rts_pstor/rtsx.c b/drivers/staging/rts_pstor/rtsx.c index 5ff59f27d10..16c73fbff51 100644 --- a/drivers/staging/rts_pstor/rtsx.c +++ b/drivers/staging/rts_pstor/rtsx.c @@ -66,12 +66,6 @@ static int msi_en; module_param(msi_en, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(msi_en, "enable msi"); -/* These are used to make sure the module doesn't unload before all the - * threads have exited. - */ -static atomic_t total_threads = ATOMIC_INIT(0); -static DECLARE_COMPLETION(threads_gone); - static irqreturn_t rtsx_interrupt(int irq, void *dev_id); /*********************************************************************** @@ -192,7 +186,7 @@ static int queuecommand_lck(struct scsi_cmnd *srb, /* enqueue the command and wake up the control thread */ srb->scsi_done = done; chip->srb = srb; - up(&(dev->sema)); + complete(&dev->cmnd_ready); return 0; } @@ -475,7 +469,7 @@ static int rtsx_control_thread(void *__dev) current->flags |= PF_NOFREEZE; for (;;) { - if (down_interruptible(&dev->sema)) + if (wait_for_completion_interruptible(&dev->cmnd_ready)) break; /* lock the device pointers */ @@ -557,8 +551,6 @@ SkipForAbort: mutex_unlock(&dev->dev_mutex); } /* for (;;) */ - scsi_host_put(host); - /* notify the exit routine that we're actually exiting now * * complete()/wait_for_completion() is similar to up()/down(), @@ -573,7 +565,7 @@ SkipForAbort: * This is important in preemption kernels, which transfer the flow * of execution immediately upon a complete(). */ - complete_and_exit(&threads_gone, 0); + complete_and_exit(&dev->control_exit, 0); } @@ -581,7 +573,6 @@ static int rtsx_polling_thread(void *__dev) { struct rtsx_dev *dev = (struct rtsx_dev *)__dev; struct rtsx_chip *chip = dev->chip; - struct Scsi_Host *host = rtsx_to_host(dev); struct sd_info *sd_card = &(chip->sd_card); struct xd_info *xd_card = &(chip->xd_card); struct ms_info *ms_card = &(chip->ms_card); @@ -621,8 +612,7 @@ static int rtsx_polling_thread(void *__dev) mutex_unlock(&dev->dev_mutex); } - scsi_host_put(host); - complete_and_exit(&threads_gone, 0); + complete_and_exit(&dev->polling_exit, 0); } /* @@ -699,29 +689,38 @@ static void rtsx_release_resources(struct rtsx_dev *dev) { printk(KERN_INFO "-- %s\n", __func__); + /* Tell the control thread to exit. The SCSI host must + * already have been removed so it won't try to queue + * any more commands. + */ + printk(KERN_INFO "-- sending exit command to thread\n"); + complete(&dev->cmnd_ready); + if (dev->ctl_thread) + wait_for_completion(&dev->control_exit); + if (dev->polling_thread) + wait_for_completion(&dev->polling_exit); + + wait_timeout(200); + if (dev->rtsx_resv_buf) { - dma_free_coherent(&(dev->pci->dev), HOST_CMDS_BUF_LEN, + dma_free_coherent(&(dev->pci->dev), RTSX_RESV_BUF_LEN, dev->rtsx_resv_buf, dev->rtsx_resv_buf_addr); dev->chip->host_cmds_ptr = NULL; dev->chip->host_sg_tbl_ptr = NULL; } - pci_disable_device(dev->pci); - pci_release_regions(dev->pci); - - if (dev->irq > 0) { + if (dev->irq > 0) free_irq(dev->irq, (void *)dev); - } - if (dev->chip->msi_en) { + if (dev->chip->msi_en) pci_disable_msi(dev->pci); - } + if (dev->remap_addr) + iounmap(dev->remap_addr); - /* Tell the control thread to exit. The SCSI host must - * already have been removed so it won't try to queue - * any more commands. - */ - printk(KERN_INFO "-- sending exit command to thread\n"); - up(&dev->sema); + pci_disable_device(dev->pci); + pci_release_regions(dev->pci); + + rtsx_release_chip(dev->chip); + kfree(dev->chip); } /* First stage of disconnect processing: stop all commands and remove @@ -739,6 +738,7 @@ static void quiesce_and_remove_host(struct rtsx_dev *dev) scsi_unlock(host); mutex_unlock(&dev->dev_mutex); wake_up(&dev->delay_wait); + wait_for_completion(&dev->scanning_done); /* Wait some time to let other threads exist */ wait_timeout(100); @@ -793,8 +793,7 @@ static int rtsx_scan_thread(void *__dev) /* Should we unbind if no devices were detected? */ } - scsi_host_put(rtsx_to_host(dev)); - complete_and_exit(&threads_gone, 0); + complete_and_exit(&dev->scanning_done, 0); } static void rtsx_init_options(struct rtsx_chip *chip) @@ -941,8 +940,11 @@ static int __devinit rtsx_probe(struct pci_dev *pci, const struct pci_device_id spin_lock_init(&dev->reg_lock); mutex_init(&(dev->dev_mutex)); - sema_init(&(dev->sema), 0); + init_completion(&dev->cmnd_ready); + init_completion(&dev->control_exit); + init_completion(&dev->polling_exit); init_completion(&(dev->notify)); + init_completion(&dev->scanning_done); init_waitqueue_head(&dev->delay_wait); dev->pci = pci; @@ -992,28 +994,22 @@ static int __devinit rtsx_probe(struct pci_dev *pci, const struct pci_device_id pci_set_master(pci); synchronize_irq(dev->irq); - err = scsi_add_host(host, &pci->dev); - if (err) { - printk(KERN_ERR "Unable to add the scsi host\n"); - goto errout; - } - rtsx_init_chip(dev->chip); /* Start up our control thread */ - th = kthread_create(rtsx_control_thread, dev, CR_DRIVER_NAME); + th = kthread_run(rtsx_control_thread, dev, CR_DRIVER_NAME); if (IS_ERR(th)) { printk(KERN_ERR "Unable to start control thread\n"); err = PTR_ERR(th); goto errout; } + dev->ctl_thread = th; - /* Take a reference to the host for the control thread and - * count it among all the threads we have launched. Then - * start it up. */ - scsi_host_get(rtsx_to_host(dev)); - atomic_inc(&total_threads); - wake_up_process(th); + err = scsi_add_host(host, &pci->dev); + if (err) { + printk(KERN_ERR "Unable to add the scsi host\n"); + goto errout; + } /* Start up the thread for delayed SCSI-device scanning */ th = kthread_create(rtsx_scan_thread, dev, "rtsx-scan"); @@ -1024,28 +1020,17 @@ static int __devinit rtsx_probe(struct pci_dev *pci, const struct pci_device_id goto errout; } - /* Take a reference to the host for the scanning thread and - * count it among all the threads we have launched. Then - * start it up. */ - scsi_host_get(rtsx_to_host(dev)); - atomic_inc(&total_threads); wake_up_process(th); /* Start up the thread for polling thread */ - th = kthread_create(rtsx_polling_thread, dev, "rtsx-polling"); + th = kthread_run(rtsx_polling_thread, dev, "rtsx-polling"); if (IS_ERR(th)) { printk(KERN_ERR "Unable to start the device-polling thread\n"); quiesce_and_remove_host(dev); err = PTR_ERR(th); goto errout; } - - /* Take a reference to the host for the polling thread and - * count it among all the threads we have launched. Then - * start it up. */ - scsi_host_get(rtsx_to_host(dev)); - atomic_inc(&total_threads); - wake_up_process(th); + dev->polling_thread = th; pci_set_drvdata(pci, dev); @@ -1108,16 +1093,6 @@ static void __exit rtsx_exit(void) pci_unregister_driver(&driver); - /* Don't return until all of our control and scanning threads - * have exited. Since each thread signals threads_gone as its - * last act, we have to call wait_for_completion the right number - * of times. - */ - while (atomic_read(&total_threads) > 0) { - wait_for_completion(&threads_gone); - atomic_dec(&total_threads); - } - printk(KERN_INFO "%s module exit\n", CR_DRIVER_NAME); } diff --git a/drivers/staging/rts_pstor/rtsx.h b/drivers/staging/rts_pstor/rtsx.h index 247615ba1d2..86e47c2e3e3 100644 --- a/drivers/staging/rts_pstor/rtsx.h +++ b/drivers/staging/rts_pstor/rtsx.h @@ -112,9 +112,16 @@ struct rtsx_dev { /* locks */ spinlock_t reg_lock; + struct task_struct *ctl_thread; /* the control thread */ + struct task_struct *polling_thread; /* the polling thread */ + /* mutual exclusion and synchronization structures */ - struct semaphore sema; /* to sleep thread on */ + struct completion cmnd_ready; /* to sleep thread on */ + struct completion control_exit; /* control thread exit */ + struct completion polling_exit; /* polling thread exit */ struct completion notify; /* thread begin/end */ + struct completion scanning_done; /* wait for scan thread */ + wait_queue_head_t delay_wait; /* wait during scan, reset */ struct mutex dev_mutex; diff --git a/drivers/staging/solo6x10/core.c b/drivers/staging/solo6x10/core.c index 76779949f14..f974f6412ad 100644 --- a/drivers/staging/solo6x10/core.c +++ b/drivers/staging/solo6x10/core.c @@ -21,6 +21,7 @@ #include <linux/module.h> #include <linux/pci.h> #include <linux/interrupt.h> +#include <linux/slab.h> #include <linux/videodev2.h> #include "solo6x10.h" #include "tw28.h" diff --git a/drivers/staging/solo6x10/enc.c b/drivers/staging/solo6x10/enc.c index 285f7f35006..de502599bb1 100644 --- a/drivers/staging/solo6x10/enc.c +++ b/drivers/staging/solo6x10/enc.c @@ -18,6 +18,7 @@ */ #include <linux/kernel.h> +#include <linux/slab.h> #include "solo6x10.h" #include "osd-font.h" diff --git a/drivers/staging/solo6x10/g723.c b/drivers/staging/solo6x10/g723.c index bd8eb92c94b..59274bfca95 100644 --- a/drivers/staging/solo6x10/g723.c +++ b/drivers/staging/solo6x10/g723.c @@ -21,6 +21,7 @@ #include <linux/mempool.h> #include <linux/poll.h> #include <linux/kthread.h> +#include <linux/slab.h> #include <linux/freezer.h> #include <sound/core.h> #include <sound/initval.h> diff --git a/drivers/staging/solo6x10/p2m.c b/drivers/staging/solo6x10/p2m.c index 5717eabb04a..56210f0fc5e 100644 --- a/drivers/staging/solo6x10/p2m.c +++ b/drivers/staging/solo6x10/p2m.c @@ -18,6 +18,7 @@ */ #include <linux/kernel.h> +#include <linux/slab.h> #include <linux/scatterlist.h> #include "solo6x10.h" diff --git a/drivers/staging/solo6x10/solo6x10.h b/drivers/staging/solo6x10/solo6x10.h index 17c06bd6cc9..abee7213202 100644 --- a/drivers/staging/solo6x10/solo6x10.h +++ b/drivers/staging/solo6x10/solo6x10.h @@ -28,6 +28,7 @@ #include <linux/list.h> #include <linux/wait.h> #include <linux/delay.h> +#include <linux/slab.h> #include <asm/io.h> #include <linux/atomic.h> #include <linux/videodev2.h> diff --git a/drivers/staging/speakup/devsynth.c b/drivers/staging/speakup/devsynth.c index 39dc586fc8b..940769ef883 100644 --- a/drivers/staging/speakup/devsynth.c +++ b/drivers/staging/speakup/devsynth.c @@ -18,13 +18,14 @@ static ssize_t speakup_file_write(struct file *fp, const char *buffer, { size_t count = nbytes; const char *ptr = buffer; - int bytes; + size_t bytes; unsigned long flags; u_char buf[256]; + if (synth == NULL) return -ENODEV; while (count > 0) { - bytes = min_t(size_t, count, sizeof(buf)); + bytes = min(count, sizeof(buf)); if (copy_from_user(buf, ptr, bytes)) return -EFAULT; count -= bytes; diff --git a/drivers/staging/zcache/Makefile b/drivers/staging/zcache/Makefile index f5ec64f9447..60daa272c20 100644 --- a/drivers/staging/zcache/Makefile +++ b/drivers/staging/zcache/Makefile @@ -1,3 +1,3 @@ -zcache-y := tmem.o +zcache-y := zcache-main.o tmem.o obj-$(CONFIG_ZCACHE) += zcache.o diff --git a/drivers/staging/zcache/zcache.c b/drivers/staging/zcache/zcache-main.c index 65a81a0d7c4..855a5bb56a4 100644 --- a/drivers/staging/zcache/zcache.c +++ b/drivers/staging/zcache/zcache-main.c @@ -19,6 +19,7 @@ * http://marc.info/?l=linux-mm&m=127811271605009 */ +#include <linux/module.h> #include <linux/cpu.h> #include <linux/highmem.h> #include <linux/list.h> @@ -27,6 +28,7 @@ #include <linux/spinlock.h> #include <linux/types.h> #include <linux/atomic.h> +#include <linux/math64.h> #include "tmem.h" #include "../zram/xvmalloc.h" /* if built in drivers/staging */ @@ -53,6 +55,9 @@ #define MAX_CLIENTS 16 #define LOCAL_CLIENT ((uint16_t)-1) + +MODULE_LICENSE("GPL"); + struct zcache_client { struct tmem_pool *tmem_pools[MAX_POOLS_PER_CLIENT]; struct xv_pool *xvpool; @@ -1158,6 +1163,7 @@ static void *zcache_pampd_create(char *data, size_t size, bool raw, int eph, uint16_t client_id = get_client_id_from_client(cli); unsigned long zv_mean_zsize; unsigned long curr_pers_pampd_count; + u64 total_zsize; if (eph) { ret = zcache_compress(page, &cdata, &clen); @@ -1190,8 +1196,9 @@ static void *zcache_pampd_create(char *data, size_t size, bool raw, int eph, } /* reject if mean compression is too poor */ if ((clen > zv_max_mean_zsize) && (curr_pers_pampd_count > 0)) { - zv_mean_zsize = xv_get_total_size_bytes(cli->xvpool) / - curr_pers_pampd_count; + total_zsize = xv_get_total_size_bytes(cli->xvpool); + zv_mean_zsize = div_u64(total_zsize, + curr_pers_pampd_count); if (zv_mean_zsize > zv_max_mean_zsize) { zcache_mean_compress_poor++; goto out; @@ -1929,9 +1936,9 @@ __setup("nofrontswap", no_frontswap); static int __init zcache_init(void) { -#ifdef CONFIG_SYSFS int ret = 0; +#ifdef CONFIG_SYSFS ret = sysfs_create_group(mm_kobj, &zcache_attr_group); if (ret) { pr_err("zcache: can't create sysfs\n"); diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c index 385acb895ab..3f94ac34dce 100644 --- a/drivers/usb/class/usbtmc.c +++ b/drivers/usb/class/usbtmc.c @@ -268,7 +268,7 @@ usbtmc_abort_bulk_in_status: dev_err(dev, "usb_bulk_msg returned %d\n", rv); goto exit; } - } while ((actual = max_size) && + } while ((actual == max_size) && (n < USBTMC_MAX_READS_TO_CLEAR_BULK_IN)); if (actual == max_size) { diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c index c962608b4b9..26678cadfb2 100644 --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -123,10 +123,11 @@ static void usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno, } if (usb_endpoint_xfer_isoc(&ep->desc)) - max_tx = ep->desc.wMaxPacketSize * (desc->bMaxBurst + 1) * - (desc->bmAttributes + 1); + max_tx = (desc->bMaxBurst + 1) * (desc->bmAttributes + 1) * + le16_to_cpu(ep->desc.wMaxPacketSize); else if (usb_endpoint_xfer_int(&ep->desc)) - max_tx = ep->desc.wMaxPacketSize * (desc->bMaxBurst + 1); + max_tx = le16_to_cpu(ep->desc.wMaxPacketSize) * + (desc->bMaxBurst + 1); else max_tx = 999999; if (le16_to_cpu(desc->wBytesPerInterval) > max_tx) { @@ -134,10 +135,10 @@ static void usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno, "config %d interface %d altsetting %d ep %d: " "setting to %d\n", usb_endpoint_xfer_isoc(&ep->desc) ? "Isoc" : "Int", - desc->wBytesPerInterval, + le16_to_cpu(desc->wBytesPerInterval), cfgno, inum, asnum, ep->desc.bEndpointAddress, max_tx); - ep->ss_ep_comp.wBytesPerInterval = max_tx; + ep->ss_ep_comp.wBytesPerInterval = cpu_to_le16(max_tx); } } diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 44b6b40aafb..5a084b9cfa3 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -310,7 +310,7 @@ config USB_PXA_U2O # musb builds in ../musb along with host support config USB_GADGET_MUSB_HDRC tristate "Inventra HDRC USB Peripheral (TI, ADI, ...)" - depends on USB_MUSB_HDRC && (USB_MUSB_PERIPHERAL || USB_MUSB_OTG) + depends on USB_MUSB_HDRC select USB_GADGET_DUALSPEED help This OTG-capable silicon IP is used in dual designs including diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index 98cbc06c30f..ddb118a7680 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -35,6 +35,7 @@ #include <linux/list.h> #include <linux/interrupt.h> #include <linux/proc_fs.h> +#include <linux/prefetch.h> #include <linux/clk.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index 5ef87794fd3..aef47414f5d 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -1079,10 +1079,12 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) cdev->desc.bMaxPacketSize0 = cdev->gadget->ep0->maxpacket; if (gadget_is_superspeed(gadget)) { - if (gadget->speed >= USB_SPEED_SUPER) + if (gadget->speed >= USB_SPEED_SUPER) { cdev->desc.bcdUSB = cpu_to_le16(0x0300); - else + cdev->desc.bMaxPacketSize0 = 9; + } else { cdev->desc.bcdUSB = cpu_to_le16(0x0210); + } } value = min(w_length, (u16) sizeof cdev->desc); diff --git a/drivers/usb/gadget/f_hid.c b/drivers/usb/gadget/f_hid.c index 403a48bcf56..83a266bdb40 100644 --- a/drivers/usb/gadget/f_hid.c +++ b/drivers/usb/gadget/f_hid.c @@ -367,6 +367,13 @@ static int hidg_setup(struct usb_function *f, case ((USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_INTERFACE) << 8 | USB_REQ_GET_DESCRIPTOR): switch (value >> 8) { + case HID_DT_HID: + VDBG(cdev, "USB_REQ_GET_DESCRIPTOR: HID\n"); + length = min_t(unsigned short, length, + hidg_desc.bLength); + memcpy(req->buf, &hidg_desc, length); + goto respond; + break; case HID_DT_REPORT: VDBG(cdev, "USB_REQ_GET_DESCRIPTOR: REPORT\n"); length = min_t(unsigned short, length, diff --git a/drivers/usb/gadget/fusb300_udc.c b/drivers/usb/gadget/fusb300_udc.c index 24a924330c8..4ec888f9000 100644 --- a/drivers/usb/gadget/fusb300_udc.c +++ b/drivers/usb/gadget/fusb300_udc.c @@ -609,107 +609,6 @@ void fusb300_rdcxf(struct fusb300 *fusb300, } } -#if 0 -static void fusb300_dbg_fifo(struct fusb300_ep *ep, - u8 entry, u16 length) -{ - u32 reg; - u32 i = 0; - u32 j = 0; - - reg = ioread32(ep->fusb300->reg + FUSB300_OFFSET_GTM); - reg &= ~(FUSB300_GTM_TST_EP_ENTRY(0xF) | - FUSB300_GTM_TST_EP_NUM(0xF) | FUSB300_GTM_TST_FIFO_DEG); - reg |= (FUSB300_GTM_TST_EP_ENTRY(entry) | - FUSB300_GTM_TST_EP_NUM(ep->epnum) | FUSB300_GTM_TST_FIFO_DEG); - iowrite32(reg, ep->fusb300->reg + FUSB300_OFFSET_GTM); - - for (i = 0; i < (length >> 2); i++) { - if (i * 4 == 1024) - break; - reg = ioread32(ep->fusb300->reg + - FUSB300_OFFSET_BUFDBG_START + i * 4); - printk(KERN_DEBUG" 0x%-8x", reg); - j++; - if ((j % 4) == 0) - printk(KERN_DEBUG "\n"); - } - - if (length % 4) { - reg = ioread32(ep->fusb300->reg + - FUSB300_OFFSET_BUFDBG_START + i * 4); - printk(KERN_DEBUG " 0x%x\n", reg); - } - - if ((j % 4) != 0) - printk(KERN_DEBUG "\n"); - - fusb300_disable_bit(ep->fusb300, FUSB300_OFFSET_GTM, - FUSB300_GTM_TST_FIFO_DEG); -} - -static void fusb300_cmp_dbg_fifo(struct fusb300_ep *ep, - u8 entry, u16 length, u8 *golden) -{ - u32 reg; - u32 i = 0; - u32 golden_value; - u8 *tmp; - - tmp = golden; - - printk(KERN_DEBUG "fusb300_cmp_dbg_fifo (entry %d) : start\n", entry); - - reg = ioread32(ep->fusb300->reg + FUSB300_OFFSET_GTM); - reg &= ~(FUSB300_GTM_TST_EP_ENTRY(0xF) | - FUSB300_GTM_TST_EP_NUM(0xF) | FUSB300_GTM_TST_FIFO_DEG); - reg |= (FUSB300_GTM_TST_EP_ENTRY(entry) | - FUSB300_GTM_TST_EP_NUM(ep->epnum) | FUSB300_GTM_TST_FIFO_DEG); - iowrite32(reg, ep->fusb300->reg + FUSB300_OFFSET_GTM); - - for (i = 0; i < (length >> 2); i++) { - if (i * 4 == 1024) - break; - golden_value = *tmp | *(tmp + 1) << 8 | - *(tmp + 2) << 16 | *(tmp + 3) << 24; - - reg = ioread32(ep->fusb300->reg + - FUSB300_OFFSET_BUFDBG_START + i*4); - - if (reg != golden_value) { - printk(KERN_DEBUG "0x%x : ", (u32)(ep->fusb300->reg + - FUSB300_OFFSET_BUFDBG_START + i*4)); - printk(KERN_DEBUG " golden = 0x%x, reg = 0x%x\n", - golden_value, reg); - } - tmp += 4; - } - - switch (length % 4) { - case 1: - golden_value = *tmp; - case 2: - golden_value = *tmp | *(tmp + 1) << 8; - case 3: - golden_value = *tmp | *(tmp + 1) << 8 | *(tmp + 2) << 16; - default: - break; - - reg = ioread32(ep->fusb300->reg + FUSB300_OFFSET_BUFDBG_START + i*4); - if (reg != golden_value) { - printk(KERN_DEBUG "0x%x:", (u32)(ep->fusb300->reg + - FUSB300_OFFSET_BUFDBG_START + i*4)); - printk(KERN_DEBUG " golden = 0x%x, reg = 0x%x\n", - golden_value, reg); - } - } - - printk(KERN_DEBUG "fusb300_cmp_dbg_fifo : end\n"); - fusb300_disable_bit(ep->fusb300, FUSB300_OFFSET_GTM, - FUSB300_GTM_TST_FIFO_DEG); -} -#endif - static void fusb300_rdfifo(struct fusb300_ep *ep, struct fusb300_request *req, u32 length) diff --git a/drivers/usb/gadget/net2272.c b/drivers/usb/gadget/net2272.c index 7c7b0e120d8..ab98ea926a1 100644 --- a/drivers/usb/gadget/net2272.c +++ b/drivers/usb/gadget/net2272.c @@ -27,13 +27,13 @@ #include <linux/interrupt.h> #include <linux/io.h> #include <linux/ioport.h> -#include <linux/irq.h> #include <linux/kernel.h> #include <linux/list.h> #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/pci.h> #include <linux/platform_device.h> +#include <linux/prefetch.h> #include <linux/sched.h> #include <linux/slab.h> #include <linux/timer.h> diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c index 85c1b0d6629..8d31848aab0 100644 --- a/drivers/usb/gadget/s3c2410_udc.c +++ b/drivers/usb/gadget/s3c2410_udc.c @@ -2060,6 +2060,7 @@ static int s3c2410_udc_resume(struct platform_device *pdev) static const struct platform_device_id s3c_udc_ids[] = { { "s3c2410-usbgadget", }, { "s3c2440-usbgadget", }, + { } }; MODULE_DEVICE_TABLE(platform, s3c_udc_ids); diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index bf2c8f65e1a..e051b30c184 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -1046,7 +1046,19 @@ static int ehci_hub_control ( if (!selector || selector > 5) goto error; ehci_quiesce(ehci); + + /* Put all enabled ports into suspend */ + while (ports--) { + u32 __iomem *sreg = + &ehci->regs->port_status[ports]; + + temp = ehci_readl(ehci, sreg) & ~PORT_RWC_BITS; + if (temp & PORT_PE) + ehci_writel(ehci, temp | PORT_SUSPEND, + sreg); + } ehci_halt(ehci); + temp = ehci_readl(ehci, status_reg); temp |= selector << 16; ehci_writel(ehci, temp, status_reg); break; diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c index 0c058be35a3..555a73c864b 100644 --- a/drivers/usb/host/ehci-mxc.c +++ b/drivers/usb/host/ehci-mxc.c @@ -24,6 +24,7 @@ #include <linux/usb/ulpi.h> #include <linux/slab.h> +#include <mach/hardware.h> #include <mach/mxc_ehci.h> #include <asm/mach-types.h> diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index 55a57c23dd0..45240321ca0 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -98,6 +98,18 @@ static void omap_ehci_soft_phy_reset(struct platform_device *pdev, u8 port) } } +static void disable_put_regulator( + struct ehci_hcd_omap_platform_data *pdata) +{ + int i; + + for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) { + if (pdata->regulator[i]) { + regulator_disable(pdata->regulator[i]); + regulator_put(pdata->regulator[i]); + } + } +} /* configure so an HC device and id are always provided */ /* always called with process context; sleeping is OK */ @@ -231,9 +243,11 @@ err_add_hcd: omap_usbhs_disable(dev); err_enable: + disable_put_regulator(pdata); usb_put_hcd(hcd); err_io: + iounmap(regs); return ret; } @@ -253,6 +267,8 @@ static int ehci_hcd_omap_remove(struct platform_device *pdev) usb_remove_hcd(hcd); omap_usbhs_disable(dev); + disable_put_regulator(dev->platform_data); + iounmap(hcd->regs); usb_put_hcd(hcd); return 0; } diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c index 55d3d5859ac..840beda66dd 100644 --- a/drivers/usb/host/isp1760-hcd.c +++ b/drivers/usb/host/isp1760-hcd.c @@ -1583,6 +1583,9 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int retval = 0; spin_lock_irqsave(&priv->lock, spinflags); + retval = usb_hcd_check_unlink_urb(hcd, urb, status); + if (retval) + goto out; qh = urb->ep->hcpriv; if (!qh) { diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index a9d315906e3..629a96813fd 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -535,7 +535,7 @@ static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev) iounmap(base); } -static const struct dmi_system_id __initconst ehci_dmi_nohandoff_table[] = { +static const struct dmi_system_id __devinitconst ehci_dmi_nohandoff_table[] = { { /* Pegatron Lucid (ExoPC) */ .matches = { @@ -817,7 +817,7 @@ static void __devinit quirk_usb_handoff_xhci(struct pci_dev *pdev) /* If the BIOS owns the HC, signal that the OS wants it, and wait */ if (val & XHCI_HC_BIOS_OWNED) { - writel(val & XHCI_HC_OS_OWNED, base + ext_cap_offset); + writel(val | XHCI_HC_OS_OWNED, base + ext_cap_offset); /* Wait for 5 seconds with 10 microsecond polling interval */ timeout = handshake(base + ext_cap_offset, XHCI_HC_BIOS_OWNED, diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 763f484bc09..1c4432d8fc1 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -345,7 +345,8 @@ static void xhci_event_ring_work(unsigned long arg) spin_lock_irqsave(&xhci->lock, flags); temp = xhci_readl(xhci, &xhci->op_regs->status); xhci_dbg(xhci, "op reg status = 0x%x\n", temp); - if (temp == 0xffffffff || (xhci->xhc_state & XHCI_STATE_DYING)) { + if (temp == 0xffffffff || (xhci->xhc_state & XHCI_STATE_DYING) || + (xhci->xhc_state & XHCI_STATE_HALTED)) { xhci_dbg(xhci, "HW died, polling stopped.\n"); spin_unlock_irqrestore(&xhci->lock, flags); return; @@ -939,8 +940,11 @@ static int xhci_check_args(struct usb_hcd *hcd, struct usb_device *udev, return 0; } + xhci = hcd_to_xhci(hcd); + if (xhci->xhc_state & XHCI_STATE_HALTED) + return -ENODEV; + if (check_virt_dev) { - xhci = hcd_to_xhci(hcd); if (!udev->slot_id || !xhci->devs || !xhci->devs[udev->slot_id]) { printk(KERN_DEBUG "xHCI %s called with unaddressed " @@ -1242,7 +1246,8 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) xhci_urb_free_priv(xhci, urb_priv); return ret; } - if (xhci->xhc_state & XHCI_STATE_DYING) { + if ((xhci->xhc_state & XHCI_STATE_DYING) || + (xhci->xhc_state & XHCI_STATE_HALTED)) { xhci_dbg(xhci, "Ep 0x%x: URB %p to be canceled on " "non-responsive xHCI host.\n", urb->ep->desc.bEndpointAddress, urb); @@ -2665,7 +2670,10 @@ void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev) int i, ret; ret = xhci_check_args(hcd, udev, NULL, 0, true, __func__); - if (ret <= 0) + /* If the host is halted due to driver unload, we still need to free the + * device. + */ + if (ret <= 0 && ret != -ENODEV) return; virt_dev = xhci->devs[udev->slot_id]; @@ -2679,7 +2687,8 @@ void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev) spin_lock_irqsave(&xhci->lock, flags); /* Don't disable the slot if the host controller is dead. */ state = xhci_readl(xhci, &xhci->op_regs->status); - if (state == 0xffffffff || (xhci->xhc_state & XHCI_STATE_DYING)) { + if (state == 0xffffffff || (xhci->xhc_state & XHCI_STATE_DYING) || + (xhci->xhc_state & XHCI_STATE_HALTED)) { xhci_free_virt_device(xhci, udev->slot_id); spin_unlock_irqrestore(&xhci->lock, flags); return; diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index 6192b45959f..fc34b8b1191 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -3,9 +3,6 @@ # for silicon based on Mentor Graphics INVENTRA designs # -comment "Enable Host or Gadget support to see Inventra options" - depends on !USB && USB_GADGET=n - # (M)HDRC = (Multipoint) Highspeed Dual-Role Controller config USB_MUSB_HDRC depends on USB && USB_GADGET diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index b67a062f556..8c41a2e6ea7 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1698,6 +1698,8 @@ static int musb_gadget_pullup(struct usb_gadget *gadget, int is_on) is_on = !!is_on; + pm_runtime_get_sync(musb->controller); + /* NOTE: this assumes we are sensing vbus; we'd rather * not pullup unless the B-session is active. */ @@ -1707,6 +1709,9 @@ static int musb_gadget_pullup(struct usb_gadget *gadget, int is_on) musb_pullup(musb, is_on); } spin_unlock_irqrestore(&musb->lock, flags); + + pm_runtime_put(musb->controller); + return 0; } diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c index c784e6c03aa..07c8a73dfe4 100644 --- a/drivers/usb/musb/tusb6010_omap.c +++ b/drivers/usb/musb/tusb6010_omap.c @@ -89,7 +89,7 @@ static inline int tusb_omap_use_shared_dmareq(struct tusb_omap_dma_ch *chdat) u32 reg = musb_readl(chdat->tbase, TUSB_DMA_EP_MAP); if (reg != 0) { - dev_dbg(musb->controller, "ep%i dmareq0 is busy for ep%i\n", + dev_dbg(chdat->musb->controller, "ep%i dmareq0 is busy for ep%i\n", chdat->epnum, reg & 0xf); return -EAGAIN; } diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c index ba79dbf5adb..cb2d451d511 100644 --- a/drivers/usb/renesas_usbhs/mod_gadget.c +++ b/drivers/usb/renesas_usbhs/mod_gadget.c @@ -14,6 +14,7 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA * */ +#include <linux/dma-mapping.h> #include <linux/io.h> #include <linux/module.h> #include <linux/platform_device.h> @@ -76,7 +77,7 @@ struct usbhsg_recip_handle { struct usbhsg_gpriv, mod) #define __usbhsg_for_each_uep(start, pos, g, i) \ - for (i = start, pos = (g)->uep; \ + for (i = start, pos = (g)->uep + i; \ i < (g)->uep_size; \ i++, pos = (g)->uep + i) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 2e06b90aa1f..78a2cf9551c 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -151,6 +151,7 @@ static struct ftdi_sio_quirk ftdi_stmclite_quirk = { * /sys/bus/usb/ftdi_sio/new_id, then send patch/report! */ static struct usb_device_id id_table_combined [] = { + { USB_DEVICE(FTDI_VID, FTDI_ZEITCONTROL_TAGTRACE_MIFARE_PID) }, { USB_DEVICE(FTDI_VID, FTDI_CTI_MINI_PID) }, { USB_DEVICE(FTDI_VID, FTDI_CTI_NANO_PID) }, { USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) }, @@ -1171,7 +1172,7 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty, case FT2232H: /* FT2232H chip */ case FT4232H: /* FT4232H chip */ case FT232H: /* FT232H chip */ - if ((baud <= 12000000) & (baud >= 1200)) { + if ((baud <= 12000000) && (baud >= 1200)) { div_value = ftdi_2232h_baud_to_divisor(baud); } else if (baud < 1200) { div_value = ftdi_232bm_baud_to_divisor(baud); @@ -1205,7 +1206,10 @@ static int change_speed(struct tty_struct *tty, struct usb_serial_port *port) urb_index_value = get_ftdi_divisor(tty, port); urb_value = (__u16)urb_index_value; urb_index = (__u16)(urb_index_value >> 16); - if (priv->interface) { /* FT2232C */ + if ((priv->chip_type == FT2232C) || (priv->chip_type == FT2232H) || + (priv->chip_type == FT4232H) || (priv->chip_type == FT232H)) { + /* Probably the BM type needs the MSB of the encoded fractional + * divider also moved like for the chips above. Any infos? */ urb_index = (__u16)((urb_index << 8) | priv->interface); } diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 19156d1049f..bf5227ad3ef 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -1159,4 +1159,8 @@ /* USB-Nano-485*/ #define FTDI_CTI_NANO_PID 0xF60B - +/* + * ZeitControl cardsystems GmbH rfid-readers http://zeitconrol.de + */ +/* TagTracer MIFARE*/ +#define FTDI_ZEITCONTROL_TAGTRACE_MIFARE_PID 0xF7C0 diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 60b25d8ea0e..81565619891 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -148,6 +148,10 @@ static void option_instat_callback(struct urb *urb); #define HUAWEI_PRODUCT_K4505 0x1464 #define HUAWEI_PRODUCT_K3765 0x1465 #define HUAWEI_PRODUCT_E14AC 0x14AC +#define HUAWEI_PRODUCT_K3770 0x14C9 +#define HUAWEI_PRODUCT_K3771 0x14CA +#define HUAWEI_PRODUCT_K4510 0x14CB +#define HUAWEI_PRODUCT_K4511 0x14CC #define HUAWEI_PRODUCT_ETS1220 0x1803 #define HUAWEI_PRODUCT_E353 0x1506 @@ -547,6 +551,14 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_ETS1220, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E14AC, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3770, 0xff, 0x02, 0x31) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3770, 0xff, 0x02, 0x32) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3771, 0xff, 0x02, 0x31) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3771, 0xff, 0x02, 0x32) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4510, 0xff, 0x01, 0x31) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4510, 0xff, 0x01, 0x32) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4511, 0xff, 0x01, 0x31) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4511, 0xff, 0x01, 0x32) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x01) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V620) }, diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 54a9dab1f33..aeccc7f0a93 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -45,6 +45,7 @@ static const struct usb_device_id id_table[] = { {USB_DEVICE(0x05c6, 0x9203)}, /* Generic Gobi Modem device */ {USB_DEVICE(0x05c6, 0x9222)}, /* Generic Gobi Modem device */ {USB_DEVICE(0x05c6, 0x9008)}, /* Generic Gobi QDL device */ + {USB_DEVICE(0x05c6, 0x9009)}, /* Generic Gobi Modem device */ {USB_DEVICE(0x05c6, 0x9201)}, /* Generic Gobi QDL device */ {USB_DEVICE(0x05c6, 0x9221)}, /* Generic Gobi QDL device */ {USB_DEVICE(0x05c6, 0x9231)}, /* Generic Gobi QDL device */ @@ -78,6 +79,7 @@ static const struct usb_device_id id_table[] = { {USB_DEVICE(0x1199, 0x9008)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */ {USB_DEVICE(0x1199, 0x9009)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */ {USB_DEVICE(0x1199, 0x900a)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */ + {USB_DEVICE(0x1199, 0x9011)}, /* Sierra Wireless Gobi 2000 Modem device (MC8305) */ {USB_DEVICE(0x16d8, 0x8001)}, /* CMDTech Gobi 2000 QDL device (VU922) */ {USB_DEVICE(0x16d8, 0x8002)}, /* CMDTech Gobi 2000 Modem device (VU922) */ {USB_DEVICE(0x05c6, 0x9204)}, /* Gobi 2000 QDL device */ diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index ccff3483eeb..3041a974faf 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1988,6 +1988,16 @@ UNUSUAL_DEV( 0x4146, 0xba01, 0x0100, 0x0100, "Micro Mini 1GB", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ), +/* + * Nick Bowler <nbowler@elliptictech.com> + * SCSI stack spams (otherwise harmless) error messages. + */ +UNUSUAL_DEV( 0xc251, 0x4003, 0x0100, 0x0100, + "Keil Software, Inc.", + "V2M MotherBoard", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NOT_LOCKABLE), + /* Reported by Andrew Simmons <andrew.simmons@gmail.com> */ UNUSUAL_DEV( 0xed06, 0x4500, 0x0001, 0x0001, "DataStor", diff --git a/fs/autofs4/autofs_i.h b/fs/autofs4/autofs_i.h index 475f9c597cb..326dc08d3e3 100644 --- a/fs/autofs4/autofs_i.h +++ b/fs/autofs4/autofs_i.h @@ -39,27 +39,17 @@ /* #define DEBUG */ -#ifdef DEBUG -#define DPRINTK(fmt, args...) \ -do { \ - printk(KERN_DEBUG "pid %d: %s: " fmt "\n", \ - current->pid, __func__, ##args); \ -} while (0) -#else -#define DPRINTK(fmt, args...) do {} while (0) -#endif - -#define AUTOFS_WARN(fmt, args...) \ -do { \ +#define DPRINTK(fmt, ...) \ + pr_debug("pid %d: %s: " fmt "\n", \ + current->pid, __func__, ##__VA_ARGS__) + +#define AUTOFS_WARN(fmt, ...) \ printk(KERN_WARNING "pid %d: %s: " fmt "\n", \ - current->pid, __func__, ##args); \ -} while (0) + current->pid, __func__, ##__VA_ARGS__) -#define AUTOFS_ERROR(fmt, args...) \ -do { \ +#define AUTOFS_ERROR(fmt, ...) \ printk(KERN_ERR "pid %d: %s: " fmt "\n", \ - current->pid, __func__, ##args); \ -} while (0) + current->pid, __func__, ##__VA_ARGS__) /* Unified info structure. This is pointed to by both the dentry and inode structures. Each file in the filesystem has an instance of this diff --git a/fs/autofs4/waitq.c b/fs/autofs4/waitq.c index 25435987d6a..e1fbdeef85d 100644 --- a/fs/autofs4/waitq.c +++ b/fs/autofs4/waitq.c @@ -104,7 +104,7 @@ static void autofs4_notify_daemon(struct autofs_sb_info *sbi, size_t pktsz; DPRINTK("wait id = 0x%08lx, name = %.*s, type=%d", - wq->wait_queue_token, wq->name.len, wq->name.name, type); + (unsigned long) wq->wait_queue_token, wq->name.len, wq->name.name, type); memset(&pkt,0,sizeof pkt); /* For security reasons */ diff --git a/fs/ecryptfs/Kconfig b/fs/ecryptfs/Kconfig index 1cd6d9d3e29..cc16562654d 100644 --- a/fs/ecryptfs/Kconfig +++ b/fs/ecryptfs/Kconfig @@ -1,6 +1,6 @@ config ECRYPT_FS tristate "eCrypt filesystem layer support (EXPERIMENTAL)" - depends on EXPERIMENTAL && KEYS && CRYPTO + depends on EXPERIMENTAL && KEYS && CRYPTO && (ENCRYPTED_KEYS || ENCRYPTED_KEYS=n) select CRYPTO_ECB select CRYPTO_CBC select CRYPTO_MD5 diff --git a/fs/ecryptfs/keystore.c b/fs/ecryptfs/keystore.c index 08a2b52bf56..ac1ad48c237 100644 --- a/fs/ecryptfs/keystore.c +++ b/fs/ecryptfs/keystore.c @@ -1973,7 +1973,7 @@ pki_encrypt_session_key(struct key *auth_tok_key, { struct ecryptfs_msg_ctx *msg_ctx = NULL; char *payload = NULL; - size_t payload_len; + size_t payload_len = 0; struct ecryptfs_message *msg; int rc; diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c index 9f1bb747d77..b4a6befb121 100644 --- a/fs/ecryptfs/main.c +++ b/fs/ecryptfs/main.c @@ -175,6 +175,7 @@ enum { ecryptfs_opt_sig, ecryptfs_opt_ecryptfs_sig, ecryptfs_opt_encrypted_view, ecryptfs_opt_fnek_sig, ecryptfs_opt_fn_cipher, ecryptfs_opt_fn_cipher_key_bytes, ecryptfs_opt_unlink_sigs, ecryptfs_opt_mount_auth_tok_only, + ecryptfs_opt_check_dev_ruid, ecryptfs_opt_err }; static const match_table_t tokens = { @@ -191,6 +192,7 @@ static const match_table_t tokens = { {ecryptfs_opt_fn_cipher_key_bytes, "ecryptfs_fn_key_bytes=%u"}, {ecryptfs_opt_unlink_sigs, "ecryptfs_unlink_sigs"}, {ecryptfs_opt_mount_auth_tok_only, "ecryptfs_mount_auth_tok_only"}, + {ecryptfs_opt_check_dev_ruid, "ecryptfs_check_dev_ruid"}, {ecryptfs_opt_err, NULL} }; @@ -236,6 +238,7 @@ static void ecryptfs_init_mount_crypt_stat( * ecryptfs_parse_options * @sb: The ecryptfs super block * @options: The options passed to the kernel + * @check_ruid: set to 1 if device uid should be checked against the ruid * * Parse mount options: * debug=N - ecryptfs_verbosity level for debug output @@ -251,7 +254,8 @@ static void ecryptfs_init_mount_crypt_stat( * * Returns zero on success; non-zero on error */ -static int ecryptfs_parse_options(struct ecryptfs_sb_info *sbi, char *options) +static int ecryptfs_parse_options(struct ecryptfs_sb_info *sbi, char *options, + uid_t *check_ruid) { char *p; int rc = 0; @@ -276,6 +280,8 @@ static int ecryptfs_parse_options(struct ecryptfs_sb_info *sbi, char *options) char *cipher_key_bytes_src; char *fn_cipher_key_bytes_src; + *check_ruid = 0; + if (!options) { rc = -EINVAL; goto out; @@ -380,6 +386,9 @@ static int ecryptfs_parse_options(struct ecryptfs_sb_info *sbi, char *options) mount_crypt_stat->flags |= ECRYPTFS_GLOBAL_MOUNT_AUTH_TOK_ONLY; break; + case ecryptfs_opt_check_dev_ruid: + *check_ruid = 1; + break; case ecryptfs_opt_err: default: printk(KERN_WARNING @@ -475,6 +484,7 @@ static struct dentry *ecryptfs_mount(struct file_system_type *fs_type, int flags const char *err = "Getting sb failed"; struct inode *inode; struct path path; + uid_t check_ruid; int rc; sbi = kmem_cache_zalloc(ecryptfs_sb_info_cache, GFP_KERNEL); @@ -483,7 +493,7 @@ static struct dentry *ecryptfs_mount(struct file_system_type *fs_type, int flags goto out; } - rc = ecryptfs_parse_options(sbi, raw_data); + rc = ecryptfs_parse_options(sbi, raw_data, &check_ruid); if (rc) { err = "Error parsing options"; goto out; @@ -521,6 +531,15 @@ static struct dentry *ecryptfs_mount(struct file_system_type *fs_type, int flags "known incompatibilities\n"); goto out_free; } + + if (check_ruid && path.dentry->d_inode->i_uid != current_uid()) { + rc = -EPERM; + printk(KERN_ERR "Mount of device (uid: %d) not owned by " + "requested user (uid: %d)\n", + path.dentry->d_inode->i_uid, current_uid()); + goto out_free; + } + ecryptfs_set_superblock_lower(s, path.dentry->d_sb); s->s_maxbytes = path.dentry->d_sb->s_maxbytes; s->s_blocksize = path.dentry->d_sb->s_blocksize; diff --git a/fs/ecryptfs/read_write.c b/fs/ecryptfs/read_write.c index 85d43096311..3745f7c2b9c 100644 --- a/fs/ecryptfs/read_write.c +++ b/fs/ecryptfs/read_write.c @@ -39,15 +39,16 @@ int ecryptfs_write_lower(struct inode *ecryptfs_inode, char *data, loff_t offset, size_t size) { - struct ecryptfs_inode_info *inode_info; + struct file *lower_file; mm_segment_t fs_save; ssize_t rc; - inode_info = ecryptfs_inode_to_private(ecryptfs_inode); - BUG_ON(!inode_info->lower_file); + lower_file = ecryptfs_inode_to_private(ecryptfs_inode)->lower_file; + if (!lower_file) + return -EIO; fs_save = get_fs(); set_fs(get_ds()); - rc = vfs_write(inode_info->lower_file, data, size, &offset); + rc = vfs_write(lower_file, data, size, &offset); set_fs(fs_save); mark_inode_dirty_sync(ecryptfs_inode); return rc; @@ -225,15 +226,16 @@ out: int ecryptfs_read_lower(char *data, loff_t offset, size_t size, struct inode *ecryptfs_inode) { - struct ecryptfs_inode_info *inode_info = - ecryptfs_inode_to_private(ecryptfs_inode); + struct file *lower_file; mm_segment_t fs_save; ssize_t rc; - BUG_ON(!inode_info->lower_file); + lower_file = ecryptfs_inode_to_private(ecryptfs_inode)->lower_file; + if (!lower_file) + return -EIO; fs_save = get_fs(); set_fs(get_ds()); - rc = vfs_read(inode_info->lower_file, data, size, &offset); + rc = vfs_read(lower_file, data, size, &offset); set_fs(fs_save); return rc; } diff --git a/fs/exec.c b/fs/exec.c index da80612a35f..25dcbe5fc35 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -1459,6 +1459,23 @@ static int do_execve_common(const char *filename, struct files_struct *displaced; bool clear_in_exec; int retval; + const struct cred *cred = current_cred(); + + /* + * We move the actual failure in case of RLIMIT_NPROC excess from + * set*uid() to execve() because too many poorly written programs + * don't check setuid() return code. Here we additionally recheck + * whether NPROC limit is still exceeded. + */ + if ((current->flags & PF_NPROC_EXCEEDED) && + atomic_read(&cred->user->processes) > rlimit(RLIMIT_NPROC)) { + retval = -EAGAIN; + goto out_ret; + } + + /* We're below the limit (still or again), so we don't want to make + * further execve() calls fail. */ + current->flags &= ~PF_NPROC_EXCEEDED; retval = unshare_files(&displaced); if (retval) diff --git a/fs/ext3/namei.c b/fs/ext3/namei.c index 6e18a0b7750..5571708b6a5 100644 --- a/fs/ext3/namei.c +++ b/fs/ext3/namei.c @@ -2209,9 +2209,11 @@ static int ext3_symlink (struct inode * dir, /* * For non-fast symlinks, we just allocate inode and put it on * orphan list in the first transaction => we need bitmap, - * group descriptor, sb, inode block, quota blocks. + * group descriptor, sb, inode block, quota blocks, and + * possibly selinux xattr blocks. */ - credits = 4 + EXT3_MAXQUOTAS_INIT_BLOCKS(dir->i_sb); + credits = 4 + EXT3_MAXQUOTAS_INIT_BLOCKS(dir->i_sb) + + EXT3_XATTR_TRANS_BLOCKS; } else { /* * Fast symlink. We have to add entry to directory diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c index 565a154e22d..f8068c7bae9 100644 --- a/fs/ext4/namei.c +++ b/fs/ext4/namei.c @@ -2253,9 +2253,11 @@ static int ext4_symlink(struct inode *dir, /* * For non-fast symlinks, we just allocate inode and put it on * orphan list in the first transaction => we need bitmap, - * group descriptor, sb, inode block, quota blocks. + * group descriptor, sb, inode block, quota blocks, and + * possibly selinux xattr blocks. */ - credits = 4 + EXT4_MAXQUOTAS_INIT_BLOCKS(dir->i_sb); + credits = 4 + EXT4_MAXQUOTAS_INIT_BLOCKS(dir->i_sb) + + EXT4_XATTR_TRANS_BLOCKS; } else { /* * Fast symlink. We have to add entry to directory diff --git a/fs/nfs/Kconfig b/fs/nfs/Kconfig index be020771c6b..dbcd82126ae 100644 --- a/fs/nfs/Kconfig +++ b/fs/nfs/Kconfig @@ -79,12 +79,9 @@ config NFS_V4_1 depends on NFS_FS && NFS_V4 && EXPERIMENTAL select SUNRPC_BACKCHANNEL select PNFS_FILE_LAYOUT - select PNFS_BLOCK - select MD - select BLK_DEV_DM help This option enables support for minor version 1 of the NFSv4 protocol - (RFC 5661 and RFC 5663) in the kernel's NFS client. + (RFC 5661) in the kernel's NFS client. If unsure, say N. @@ -93,16 +90,13 @@ config PNFS_FILE_LAYOUT config PNFS_BLOCK tristate + depends on NFS_FS && NFS_V4_1 && BLK_DEV_DM + default m config PNFS_OBJLAYOUT - tristate "Provide support for the pNFS Objects Layout Driver for NFSv4.1 pNFS (EXPERIMENTAL)" + tristate depends on NFS_FS && NFS_V4_1 && SCSI_OSD_ULD - help - Say M here if you want your pNFS client to support the Objects Layout Driver. - Requires the SCSI osd initiator library (SCSI_OSD_INITIATOR) and - upper level driver (SCSI_OSD_ULD). - - If unsure, say N. + default m config ROOT_NFS bool "Root file system on NFS" diff --git a/fs/xfs/linux-2.6/xfs_buf.c b/fs/xfs/linux-2.6/xfs_buf.c index d1fe74506c4..c57836dc778 100644 --- a/fs/xfs/linux-2.6/xfs_buf.c +++ b/fs/xfs/linux-2.6/xfs_buf.c @@ -596,7 +596,7 @@ _xfs_buf_read( bp->b_flags |= flags & (XBF_READ | XBF_ASYNC | XBF_READ_AHEAD); status = xfs_buf_iorequest(bp); - if (status || XFS_BUF_ISERROR(bp) || (flags & XBF_ASYNC)) + if (status || bp->b_error || (flags & XBF_ASYNC)) return status; return xfs_buf_iowait(bp); } @@ -679,7 +679,6 @@ xfs_buf_read_uncached( /* set up the buffer for a read IO */ XFS_BUF_SET_ADDR(bp, daddr); XFS_BUF_READ(bp); - XFS_BUF_BUSY(bp); xfsbdstrat(mp, bp); error = xfs_buf_iowait(bp); @@ -1069,7 +1068,7 @@ xfs_bioerror( /* * No need to wait until the buffer is unpinned, we aren't flushing it. */ - XFS_BUF_ERROR(bp, EIO); + xfs_buf_ioerror(bp, EIO); /* * We're calling xfs_buf_ioend, so delete XBF_DONE flag. @@ -1094,7 +1093,7 @@ STATIC int xfs_bioerror_relse( struct xfs_buf *bp) { - int64_t fl = XFS_BUF_BFLAGS(bp); + int64_t fl = bp->b_flags; /* * No need to wait until the buffer is unpinned. * We aren't flushing it. @@ -1115,7 +1114,7 @@ xfs_bioerror_relse( * There's no reason to mark error for * ASYNC buffers. */ - XFS_BUF_ERROR(bp, EIO); + xfs_buf_ioerror(bp, EIO); XFS_BUF_FINISH_IOWAIT(bp); } else { xfs_buf_relse(bp); @@ -1324,7 +1323,7 @@ xfs_buf_offset( struct page *page; if (bp->b_flags & XBF_MAPPED) - return XFS_BUF_PTR(bp) + offset; + return bp->b_addr + offset; offset += bp->b_offset; page = bp->b_pages[offset >> PAGE_SHIFT]; @@ -1484,7 +1483,7 @@ xfs_setsize_buftarg_flags( if (set_blocksize(btp->bt_bdev, sectorsize)) { xfs_warn(btp->bt_mount, "Cannot set_blocksize to %u on device %s\n", - sectorsize, XFS_BUFTARG_NAME(btp)); + sectorsize, xfs_buf_target_name(btp)); return EINVAL; } @@ -1681,7 +1680,7 @@ xfs_buf_delwri_split( list_for_each_entry_safe(bp, n, dwq, b_list) { ASSERT(bp->b_flags & XBF_DELWRI); - if (!XFS_BUF_ISPINNED(bp) && xfs_buf_trylock(bp)) { + if (!xfs_buf_ispinned(bp) && xfs_buf_trylock(bp)) { if (!force && time_before(jiffies, bp->b_queuetime + age)) { xfs_buf_unlock(bp); diff --git a/fs/xfs/linux-2.6/xfs_buf.h b/fs/xfs/linux-2.6/xfs_buf.h index 6a83b46b4bc..620972b8094 100644 --- a/fs/xfs/linux-2.6/xfs_buf.h +++ b/fs/xfs/linux-2.6/xfs_buf.h @@ -228,11 +228,15 @@ extern void xfs_buf_delwri_promote(xfs_buf_t *); extern int xfs_buf_init(void); extern void xfs_buf_terminate(void); -#define xfs_buf_target_name(target) \ - ({ char __b[BDEVNAME_SIZE]; bdevname((target)->bt_bdev, __b); __b; }) +static inline const char * +xfs_buf_target_name(struct xfs_buftarg *target) +{ + static char __b[BDEVNAME_SIZE]; + + return bdevname(target->bt_bdev, __b); +} -#define XFS_BUF_BFLAGS(bp) ((bp)->b_flags) #define XFS_BUF_ZEROFLAGS(bp) \ ((bp)->b_flags &= ~(XBF_READ|XBF_WRITE|XBF_ASYNC|XBF_DELWRI| \ XBF_SYNCIO|XBF_FUA|XBF_FLUSH)) @@ -251,23 +255,14 @@ void xfs_buf_stale(struct xfs_buf *bp); #define XFS_BUF_UNDELAYWRITE(bp) xfs_buf_delwri_dequeue(bp) #define XFS_BUF_ISDELAYWRITE(bp) ((bp)->b_flags & XBF_DELWRI) -#define XFS_BUF_ERROR(bp,no) xfs_buf_ioerror(bp,no) -#define XFS_BUF_GETERROR(bp) xfs_buf_geterror(bp) -#define XFS_BUF_ISERROR(bp) (xfs_buf_geterror(bp) ? 1 : 0) - #define XFS_BUF_DONE(bp) ((bp)->b_flags |= XBF_DONE) #define XFS_BUF_UNDONE(bp) ((bp)->b_flags &= ~XBF_DONE) #define XFS_BUF_ISDONE(bp) ((bp)->b_flags & XBF_DONE) -#define XFS_BUF_BUSY(bp) do { } while (0) -#define XFS_BUF_UNBUSY(bp) do { } while (0) -#define XFS_BUF_ISBUSY(bp) (1) - #define XFS_BUF_ASYNC(bp) ((bp)->b_flags |= XBF_ASYNC) #define XFS_BUF_UNASYNC(bp) ((bp)->b_flags &= ~XBF_ASYNC) #define XFS_BUF_ISASYNC(bp) ((bp)->b_flags & XBF_ASYNC) -#define XFS_BUF_HOLD(bp) xfs_buf_hold(bp) #define XFS_BUF_READ(bp) ((bp)->b_flags |= XBF_READ) #define XFS_BUF_UNREAD(bp) ((bp)->b_flags &= ~XBF_READ) #define XFS_BUF_ISREAD(bp) ((bp)->b_flags & XBF_READ) @@ -276,10 +271,6 @@ void xfs_buf_stale(struct xfs_buf *bp); #define XFS_BUF_UNWRITE(bp) ((bp)->b_flags &= ~XBF_WRITE) #define XFS_BUF_ISWRITE(bp) ((bp)->b_flags & XBF_WRITE) -#define XFS_BUF_SET_START(bp) do { } while (0) - -#define XFS_BUF_PTR(bp) (xfs_caddr_t)((bp)->b_addr) -#define XFS_BUF_SET_PTR(bp, val, cnt) xfs_buf_associate_memory(bp, val, cnt) #define XFS_BUF_ADDR(bp) ((bp)->b_bn) #define XFS_BUF_SET_ADDR(bp, bno) ((bp)->b_bn = (xfs_daddr_t)(bno)) #define XFS_BUF_OFFSET(bp) ((bp)->b_file_offset) @@ -299,14 +290,13 @@ xfs_buf_set_ref( #define XFS_BUF_SET_VTYPE_REF(bp, type, ref) xfs_buf_set_ref(bp, ref) #define XFS_BUF_SET_VTYPE(bp, type) do { } while (0) -#define XFS_BUF_ISPINNED(bp) atomic_read(&((bp)->b_pin_count)) +static inline int xfs_buf_ispinned(struct xfs_buf *bp) +{ + return atomic_read(&bp->b_pin_count); +} #define XFS_BUF_FINISH_IOWAIT(bp) complete(&bp->b_iowait); -#define XFS_BUF_SET_TARGET(bp, target) ((bp)->b_target = (target)) -#define XFS_BUF_TARGET(bp) ((bp)->b_target) -#define XFS_BUFTARG_NAME(target) xfs_buf_target_name(target) - static inline void xfs_buf_relse(xfs_buf_t *bp) { xfs_buf_unlock(bp); diff --git a/fs/xfs/linux-2.6/xfs_sync.c b/fs/xfs/linux-2.6/xfs_sync.c index e4c938afb91..4604f90f86a 100644 --- a/fs/xfs/linux-2.6/xfs_sync.c +++ b/fs/xfs/linux-2.6/xfs_sync.c @@ -332,7 +332,7 @@ xfs_sync_fsdata( * between there and here. */ bp = xfs_getsb(mp, 0); - if (XFS_BUF_ISPINNED(bp)) + if (xfs_buf_ispinned(bp)) xfs_log_force(mp, 0); return xfs_bwrite(mp, bp); diff --git a/fs/xfs/quota/xfs_dquot.c b/fs/xfs/quota/xfs_dquot.c index 837f31158d4..db62959bed1 100644 --- a/fs/xfs/quota/xfs_dquot.c +++ b/fs/xfs/quota/xfs_dquot.c @@ -318,10 +318,9 @@ xfs_qm_init_dquot_blk( int curid, i; ASSERT(tp); - ASSERT(XFS_BUF_ISBUSY(bp)); ASSERT(xfs_buf_islocked(bp)); - d = (xfs_dqblk_t *)XFS_BUF_PTR(bp); + d = bp->b_addr; /* * ID of the first dquot in the block - id's are zero based. @@ -403,7 +402,7 @@ xfs_qm_dqalloc( dqp->q_blkno, mp->m_quotainfo->qi_dqchunklen, 0); - if (!bp || (error = XFS_BUF_GETERROR(bp))) + if (!bp || (error = xfs_buf_geterror(bp))) goto error1; /* * Make a chunk of dquots out of this buffer and log @@ -534,13 +533,12 @@ xfs_qm_dqtobp( return XFS_ERROR(error); } - ASSERT(XFS_BUF_ISBUSY(bp)); ASSERT(xfs_buf_islocked(bp)); /* * calculate the location of the dquot inside the buffer. */ - ddq = (struct xfs_disk_dquot *)(XFS_BUF_PTR(bp) + dqp->q_bufoffset); + ddq = bp->b_addr + dqp->q_bufoffset; /* * A simple sanity check in case we got a corrupted dquot... @@ -553,7 +551,6 @@ xfs_qm_dqtobp( xfs_trans_brelse(tp, bp); return XFS_ERROR(EIO); } - XFS_BUF_BUSY(bp); /* We dirtied this */ } *O_bpp = bp; @@ -622,7 +619,6 @@ xfs_qm_dqread( * this particular dquot was repaired. We still aren't afraid to * brelse it because we have the changes incore. */ - ASSERT(XFS_BUF_ISBUSY(bp)); ASSERT(xfs_buf_islocked(bp)); xfs_trans_brelse(tp, bp); @@ -1204,7 +1200,7 @@ xfs_qm_dqflush( /* * Calculate the location of the dquot inside the buffer. */ - ddqp = (struct xfs_disk_dquot *)(XFS_BUF_PTR(bp) + dqp->q_bufoffset); + ddqp = bp->b_addr + dqp->q_bufoffset; /* * A simple sanity check in case we got a corrupted dquot.. @@ -1240,7 +1236,7 @@ xfs_qm_dqflush( * If the buffer is pinned then push on the log so we won't * get stuck waiting in the write for too long. */ - if (XFS_BUF_ISPINNED(bp)) { + if (xfs_buf_ispinned(bp)) { trace_xfs_dqflush_force(dqp); xfs_log_force(mp, 0); } @@ -1447,7 +1443,7 @@ xfs_qm_dqflock_pushbuf_wait( goto out_lock; if (XFS_BUF_ISDELAYWRITE(bp)) { - if (XFS_BUF_ISPINNED(bp)) + if (xfs_buf_ispinned(bp)) xfs_log_force(mp, 0); xfs_buf_delwri_promote(bp); wake_up_process(bp->b_target->bt_task); diff --git a/fs/xfs/quota/xfs_qm.c b/fs/xfs/quota/xfs_qm.c index 46e54ad9a2d..9a0aa76facd 100644 --- a/fs/xfs/quota/xfs_qm.c +++ b/fs/xfs/quota/xfs_qm.c @@ -1240,7 +1240,7 @@ xfs_qm_reset_dqcounts( do_div(j, sizeof(xfs_dqblk_t)); ASSERT(mp->m_quotainfo->qi_dqperchunk == j); #endif - ddq = (xfs_disk_dquot_t *)XFS_BUF_PTR(bp); + ddq = bp->b_addr; for (j = 0; j < mp->m_quotainfo->qi_dqperchunk; j++) { /* * Do a sanity check, and if needed, repair the dqblk. Don't diff --git a/fs/xfs/xfs_ag.h b/fs/xfs/xfs_ag.h index 6530769a999..4805f009f92 100644 --- a/fs/xfs/xfs_ag.h +++ b/fs/xfs/xfs_ag.h @@ -103,7 +103,7 @@ typedef struct xfs_agf { /* disk block (xfs_daddr_t) in the AG */ #define XFS_AGF_DADDR(mp) ((xfs_daddr_t)(1 << (mp)->m_sectbb_log)) #define XFS_AGF_BLOCK(mp) XFS_HDR_BLOCK(mp, XFS_AGF_DADDR(mp)) -#define XFS_BUF_TO_AGF(bp) ((xfs_agf_t *)XFS_BUF_PTR(bp)) +#define XFS_BUF_TO_AGF(bp) ((xfs_agf_t *)((bp)->b_addr)) extern int xfs_read_agf(struct xfs_mount *mp, struct xfs_trans *tp, xfs_agnumber_t agno, int flags, struct xfs_buf **bpp); @@ -156,7 +156,7 @@ typedef struct xfs_agi { /* disk block (xfs_daddr_t) in the AG */ #define XFS_AGI_DADDR(mp) ((xfs_daddr_t)(2 << (mp)->m_sectbb_log)) #define XFS_AGI_BLOCK(mp) XFS_HDR_BLOCK(mp, XFS_AGI_DADDR(mp)) -#define XFS_BUF_TO_AGI(bp) ((xfs_agi_t *)XFS_BUF_PTR(bp)) +#define XFS_BUF_TO_AGI(bp) ((xfs_agi_t *)((bp)->b_addr)) extern int xfs_read_agi(struct xfs_mount *mp, struct xfs_trans *tp, xfs_agnumber_t agno, struct xfs_buf **bpp); @@ -168,7 +168,7 @@ extern int xfs_read_agi(struct xfs_mount *mp, struct xfs_trans *tp, #define XFS_AGFL_DADDR(mp) ((xfs_daddr_t)(3 << (mp)->m_sectbb_log)) #define XFS_AGFL_BLOCK(mp) XFS_HDR_BLOCK(mp, XFS_AGFL_DADDR(mp)) #define XFS_AGFL_SIZE(mp) ((mp)->m_sb.sb_sectsize / sizeof(xfs_agblock_t)) -#define XFS_BUF_TO_AGFL(bp) ((xfs_agfl_t *)XFS_BUF_PTR(bp)) +#define XFS_BUF_TO_AGFL(bp) ((xfs_agfl_t *)((bp)->b_addr)) typedef struct xfs_agfl { __be32 agfl_bno[1]; /* actually XFS_AGFL_SIZE(mp) */ diff --git a/fs/xfs/xfs_alloc.c b/fs/xfs/xfs_alloc.c index 1e00b3ef627..bdd9cb54d63 100644 --- a/fs/xfs/xfs_alloc.c +++ b/fs/xfs/xfs_alloc.c @@ -451,8 +451,7 @@ xfs_alloc_read_agfl( XFS_FSS_TO_BB(mp, 1), 0, &bp); if (error) return error; - ASSERT(bp); - ASSERT(!XFS_BUF_GETERROR(bp)); + ASSERT(!xfs_buf_geterror(bp)); XFS_BUF_SET_VTYPE_REF(bp, B_FS_AGFL, XFS_AGFL_REF); *bpp = bp; return 0; @@ -2116,7 +2115,7 @@ xfs_read_agf( if (!*bpp) return 0; - ASSERT(!XFS_BUF_GETERROR(*bpp)); + ASSERT(!(*bpp)->b_error); agf = XFS_BUF_TO_AGF(*bpp); /* @@ -2168,7 +2167,7 @@ xfs_alloc_read_agf( return error; if (!*bpp) return 0; - ASSERT(!XFS_BUF_GETERROR(*bpp)); + ASSERT(!(*bpp)->b_error); agf = XFS_BUF_TO_AGF(*bpp); pag = xfs_perag_get(mp, agno); diff --git a/fs/xfs/xfs_attr.c b/fs/xfs/xfs_attr.c index cbae424fe1b..160bcdc34a6 100644 --- a/fs/xfs/xfs_attr.c +++ b/fs/xfs/xfs_attr.c @@ -2121,8 +2121,7 @@ xfs_attr_rmtval_set(xfs_da_args_t *args) bp = xfs_buf_get(mp->m_ddev_targp, dblkno, blkcnt, XBF_LOCK | XBF_DONT_BLOCK); - ASSERT(bp); - ASSERT(!XFS_BUF_GETERROR(bp)); + ASSERT(!xfs_buf_geterror(bp)); tmp = (valuelen < XFS_BUF_SIZE(bp)) ? valuelen : XFS_BUF_SIZE(bp); diff --git a/fs/xfs/xfs_bmap.c b/fs/xfs/xfs_bmap.c index ab3e5c6c464..452a291383a 100644 --- a/fs/xfs/xfs_bmap.c +++ b/fs/xfs/xfs_bmap.c @@ -3383,8 +3383,7 @@ xfs_bmap_local_to_extents( ASSERT(args.len == 1); *firstblock = args.fsbno; bp = xfs_btree_get_bufl(args.mp, tp, args.fsbno, 0); - memcpy((char *)XFS_BUF_PTR(bp), ifp->if_u1.if_data, - ifp->if_bytes); + memcpy(bp->b_addr, ifp->if_u1.if_data, ifp->if_bytes); xfs_trans_log_buf(tp, bp, 0, ifp->if_bytes - 1); xfs_bmap_forkoff_reset(args.mp, ip, whichfork); xfs_idata_realloc(ip, -ifp->if_bytes, whichfork); diff --git a/fs/xfs/xfs_btree.c b/fs/xfs/xfs_btree.c index cabf4b5604a..2b9fd385e27 100644 --- a/fs/xfs/xfs_btree.c +++ b/fs/xfs/xfs_btree.c @@ -275,8 +275,7 @@ xfs_btree_dup_cursor( return error; } new->bc_bufs[i] = bp; - ASSERT(bp); - ASSERT(!XFS_BUF_GETERROR(bp)); + ASSERT(!xfs_buf_geterror(bp)); } else new->bc_bufs[i] = NULL; } @@ -467,8 +466,7 @@ xfs_btree_get_bufl( ASSERT(fsbno != NULLFSBLOCK); d = XFS_FSB_TO_DADDR(mp, fsbno); bp = xfs_trans_get_buf(tp, mp->m_ddev_targp, d, mp->m_bsize, lock); - ASSERT(bp); - ASSERT(!XFS_BUF_GETERROR(bp)); + ASSERT(!xfs_buf_geterror(bp)); return bp; } @@ -491,8 +489,7 @@ xfs_btree_get_bufs( ASSERT(agbno != NULLAGBLOCK); d = XFS_AGB_TO_DADDR(mp, agno, agbno); bp = xfs_trans_get_buf(tp, mp->m_ddev_targp, d, mp->m_bsize, lock); - ASSERT(bp); - ASSERT(!XFS_BUF_GETERROR(bp)); + ASSERT(!xfs_buf_geterror(bp)); return bp; } @@ -632,7 +629,7 @@ xfs_btree_read_bufl( mp->m_bsize, lock, &bp))) { return error; } - ASSERT(!bp || !XFS_BUF_GETERROR(bp)); + ASSERT(!xfs_buf_geterror(bp)); if (bp) XFS_BUF_SET_VTYPE_REF(bp, B_FS_MAP, refval); *bpp = bp; @@ -973,8 +970,7 @@ xfs_btree_get_buf_block( *bpp = xfs_trans_get_buf(cur->bc_tp, mp->m_ddev_targp, d, mp->m_bsize, flags); - ASSERT(*bpp); - ASSERT(!XFS_BUF_GETERROR(*bpp)); + ASSERT(!xfs_buf_geterror(*bpp)); *block = XFS_BUF_TO_BLOCK(*bpp); return 0; @@ -1006,8 +1002,7 @@ xfs_btree_read_buf_block( if (error) return error; - ASSERT(*bpp != NULL); - ASSERT(!XFS_BUF_GETERROR(*bpp)); + ASSERT(!xfs_buf_geterror(*bpp)); xfs_btree_set_refs(cur, *bpp); *block = XFS_BUF_TO_BLOCK(*bpp); diff --git a/fs/xfs/xfs_btree.h b/fs/xfs/xfs_btree.h index 8d05a6a46ce..5b240de104c 100644 --- a/fs/xfs/xfs_btree.h +++ b/fs/xfs/xfs_btree.h @@ -262,7 +262,7 @@ typedef struct xfs_btree_cur /* * Convert from buffer to btree block header. */ -#define XFS_BUF_TO_BLOCK(bp) ((struct xfs_btree_block *)XFS_BUF_PTR(bp)) +#define XFS_BUF_TO_BLOCK(bp) ((struct xfs_btree_block *)((bp)->b_addr)) /* diff --git a/fs/xfs/xfs_buf_item.c b/fs/xfs/xfs_buf_item.c index 88492916c3d..cac2ecfa674 100644 --- a/fs/xfs/xfs_buf_item.c +++ b/fs/xfs/xfs_buf_item.c @@ -124,9 +124,9 @@ xfs_buf_item_log_check( bp = bip->bli_buf; ASSERT(XFS_BUF_COUNT(bp) > 0); - ASSERT(XFS_BUF_PTR(bp) != NULL); + ASSERT(bp->b_addr != NULL); orig = bip->bli_orig; - buffer = XFS_BUF_PTR(bp); + buffer = bp->b_addr; for (x = 0; x < XFS_BUF_COUNT(bp); x++) { if (orig[x] != buffer[x] && !btst(bip->bli_logged, x)) { xfs_emerg(bp->b_mount, @@ -371,7 +371,6 @@ xfs_buf_item_pin( { struct xfs_buf_log_item *bip = BUF_ITEM(lip); - ASSERT(XFS_BUF_ISBUSY(bip->bli_buf)); ASSERT(atomic_read(&bip->bli_refcount) > 0); ASSERT((bip->bli_flags & XFS_BLI_LOGGED) || (bip->bli_flags & XFS_BLI_STALE)); @@ -479,13 +478,13 @@ xfs_buf_item_trylock( struct xfs_buf_log_item *bip = BUF_ITEM(lip); struct xfs_buf *bp = bip->bli_buf; - if (XFS_BUF_ISPINNED(bp)) + if (xfs_buf_ispinned(bp)) return XFS_ITEM_PINNED; if (!xfs_buf_trylock(bp)) return XFS_ITEM_LOCKED; /* take a reference to the buffer. */ - XFS_BUF_HOLD(bp); + xfs_buf_hold(bp); ASSERT(!(bip->bli_flags & XFS_BLI_STALE)); trace_xfs_buf_item_trylock(bip); @@ -726,7 +725,7 @@ xfs_buf_item_init( * to have logged. */ bip->bli_orig = (char *)kmem_alloc(XFS_BUF_COUNT(bp), KM_SLEEP); - memcpy(bip->bli_orig, XFS_BUF_PTR(bp), XFS_BUF_COUNT(bp)); + memcpy(bip->bli_orig, bp->b_addr, XFS_BUF_COUNT(bp)); bip->bli_logged = (char *)kmem_zalloc(XFS_BUF_COUNT(bp) / NBBY, KM_SLEEP); #endif @@ -895,7 +894,6 @@ xfs_buf_attach_iodone( { xfs_log_item_t *head_lip; - ASSERT(XFS_BUF_ISBUSY(bp)); ASSERT(xfs_buf_islocked(bp)); lip->li_cb = cb; @@ -960,7 +958,7 @@ xfs_buf_iodone_callbacks( static ulong lasttime; static xfs_buftarg_t *lasttarg; - if (likely(!XFS_BUF_GETERROR(bp))) + if (likely(!xfs_buf_geterror(bp))) goto do_callbacks; /* @@ -973,14 +971,14 @@ xfs_buf_iodone_callbacks( goto do_callbacks; } - if (XFS_BUF_TARGET(bp) != lasttarg || + if (bp->b_target != lasttarg || time_after(jiffies, (lasttime + 5*HZ))) { lasttime = jiffies; xfs_alert(mp, "Device %s: metadata write error block 0x%llx", - XFS_BUFTARG_NAME(XFS_BUF_TARGET(bp)), + xfs_buf_target_name(bp->b_target), (__uint64_t)XFS_BUF_ADDR(bp)); } - lasttarg = XFS_BUF_TARGET(bp); + lasttarg = bp->b_target; /* * If the write was asynchronous then no one will be looking for the @@ -991,12 +989,11 @@ xfs_buf_iodone_callbacks( * around. */ if (XFS_BUF_ISASYNC(bp)) { - XFS_BUF_ERROR(bp, 0); /* errno of 0 unsets the flag */ + xfs_buf_ioerror(bp, 0); /* errno of 0 unsets the flag */ if (!XFS_BUF_ISSTALE(bp)) { XFS_BUF_DELAYWRITE(bp); XFS_BUF_DONE(bp); - XFS_BUF_SET_START(bp); } ASSERT(bp->b_iodone != NULL); trace_xfs_buf_item_iodone_async(bp, _RET_IP_); @@ -1013,7 +1010,6 @@ xfs_buf_iodone_callbacks( XFS_BUF_UNDELAYWRITE(bp); trace_xfs_buf_error_relse(bp, _RET_IP_); - xfs_force_shutdown(mp, SHUTDOWN_META_IO_ERROR); do_callbacks: xfs_buf_do_callbacks(bp); diff --git a/fs/xfs/xfs_da_btree.c b/fs/xfs/xfs_da_btree.c index 5bfcb8779f9..ee9d5427fcd 100644 --- a/fs/xfs/xfs_da_btree.c +++ b/fs/xfs/xfs_da_btree.c @@ -2050,7 +2050,7 @@ xfs_da_do_buf( case 0: bp = xfs_trans_get_buf(trans, mp->m_ddev_targp, mappedbno, nmapped, 0); - error = bp ? XFS_BUF_GETERROR(bp) : XFS_ERROR(EIO); + error = bp ? bp->b_error : XFS_ERROR(EIO); break; case 1: case 2: @@ -2268,7 +2268,7 @@ xfs_da_buf_make(int nbuf, xfs_buf_t **bps) dabuf->nbuf = 1; bp = bps[0]; dabuf->bbcount = (short)BTOBB(XFS_BUF_COUNT(bp)); - dabuf->data = XFS_BUF_PTR(bp); + dabuf->data = bp->b_addr; dabuf->bps[0] = bp; } else { dabuf->nbuf = nbuf; @@ -2279,7 +2279,7 @@ xfs_da_buf_make(int nbuf, xfs_buf_t **bps) dabuf->data = kmem_alloc(BBTOB(dabuf->bbcount), KM_SLEEP); for (i = off = 0; i < nbuf; i++, off += XFS_BUF_COUNT(bp)) { bp = bps[i]; - memcpy((char *)dabuf->data + off, XFS_BUF_PTR(bp), + memcpy((char *)dabuf->data + off, bp->b_addr, XFS_BUF_COUNT(bp)); } } @@ -2302,8 +2302,8 @@ xfs_da_buf_clean(xfs_dabuf_t *dabuf) for (i = off = 0; i < dabuf->nbuf; i++, off += XFS_BUF_COUNT(bp)) { bp = dabuf->bps[i]; - memcpy(XFS_BUF_PTR(bp), (char *)dabuf->data + off, - XFS_BUF_COUNT(bp)); + memcpy(bp->b_addr, dabuf->data + off, + XFS_BUF_COUNT(bp)); } } } @@ -2340,7 +2340,7 @@ xfs_da_log_buf(xfs_trans_t *tp, xfs_dabuf_t *dabuf, uint first, uint last) ASSERT(dabuf->nbuf && dabuf->data && dabuf->bbcount && dabuf->bps[0]); if (dabuf->nbuf == 1) { - ASSERT(dabuf->data == (void *)XFS_BUF_PTR(dabuf->bps[0])); + ASSERT(dabuf->data == dabuf->bps[0]->b_addr); xfs_trans_log_buf(tp, dabuf->bps[0], first, last); return; } diff --git a/fs/xfs/xfs_dinode.h b/fs/xfs/xfs_dinode.h index dffba9ba0db..a3721633abc 100644 --- a/fs/xfs/xfs_dinode.h +++ b/fs/xfs/xfs_dinode.h @@ -148,7 +148,7 @@ typedef enum xfs_dinode_fmt { be32_to_cpu((dip)->di_nextents) : \ be16_to_cpu((dip)->di_anextents)) -#define XFS_BUF_TO_DINODE(bp) ((xfs_dinode_t *)XFS_BUF_PTR(bp)) +#define XFS_BUF_TO_DINODE(bp) ((xfs_dinode_t *)((bp)->b_addr)) /* * For block and character special files the 32bit dev_t is stored at the diff --git a/fs/xfs/xfs_ialloc.c b/fs/xfs/xfs_ialloc.c index dd5628bd8d0..9f24ec28283 100644 --- a/fs/xfs/xfs_ialloc.c +++ b/fs/xfs/xfs_ialloc.c @@ -202,8 +202,7 @@ xfs_ialloc_inode_init( fbuf = xfs_trans_get_buf(tp, mp->m_ddev_targp, d, mp->m_bsize * blks_per_cluster, XBF_LOCK); - ASSERT(fbuf); - ASSERT(!XFS_BUF_GETERROR(fbuf)); + ASSERT(!xfs_buf_geterror(fbuf)); /* * Initialize all inodes in this buffer and then log them. @@ -1486,7 +1485,7 @@ xfs_read_agi( if (error) return error; - ASSERT(*bpp && !XFS_BUF_GETERROR(*bpp)); + ASSERT(!xfs_buf_geterror(*bpp)); agi = XFS_BUF_TO_AGI(*bpp); /* diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c index 2fcca4b03ed..0239a7c7c88 100644 --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -2473,7 +2473,7 @@ cluster_corrupt_out: if (bp->b_iodone) { XFS_BUF_UNDONE(bp); XFS_BUF_STALE(bp); - XFS_BUF_ERROR(bp,EIO); + xfs_buf_ioerror(bp, EIO); xfs_buf_ioend(bp, 0); } else { XFS_BUF_STALE(bp); @@ -2585,7 +2585,7 @@ xfs_iflush( * If the buffer is pinned then push on the log now so we won't * get stuck waiting in the write for too long. */ - if (XFS_BUF_ISPINNED(bp)) + if (xfs_buf_ispinned(bp)) xfs_log_force(mp, 0); /* diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c index 06ff8437ed8..3a8d4f66d70 100644 --- a/fs/xfs/xfs_log.c +++ b/fs/xfs/xfs_log.c @@ -878,7 +878,7 @@ xlog_iodone(xfs_buf_t *bp) /* * Race to shutdown the filesystem if we see an error. */ - if (XFS_TEST_ERROR((XFS_BUF_GETERROR(bp)), l->l_mp, + if (XFS_TEST_ERROR((xfs_buf_geterror(bp)), l->l_mp, XFS_ERRTAG_IODONE_IOERR, XFS_RANDOM_IODONE_IOERR)) { xfs_ioerror_alert("xlog_iodone", l->l_mp, bp, XFS_BUF_ADDR(bp)); XFS_BUF_STALE(bp); @@ -1051,7 +1051,6 @@ xlog_alloc_log(xfs_mount_t *mp, if (!bp) goto out_free_log; bp->b_iodone = xlog_iodone; - ASSERT(XFS_BUF_ISBUSY(bp)); ASSERT(xfs_buf_islocked(bp)); log->l_xbuf = bp; @@ -1108,7 +1107,6 @@ xlog_alloc_log(xfs_mount_t *mp, iclog->ic_callback_tail = &(iclog->ic_callback); iclog->ic_datap = (char *)iclog->ic_data + log->l_iclog_hsize; - ASSERT(XFS_BUF_ISBUSY(iclog->ic_bp)); ASSERT(xfs_buf_islocked(iclog->ic_bp)); init_waitqueue_head(&iclog->ic_force_wait); init_waitqueue_head(&iclog->ic_write_wait); @@ -1248,7 +1246,7 @@ xlog_bdstrat( struct xlog_in_core *iclog = bp->b_fspriv; if (iclog->ic_state & XLOG_STATE_IOERROR) { - XFS_BUF_ERROR(bp, EIO); + xfs_buf_ioerror(bp, EIO); XFS_BUF_STALE(bp); xfs_buf_ioend(bp, 0); /* @@ -1355,7 +1353,6 @@ xlog_sync(xlog_t *log, XFS_BUF_SET_COUNT(bp, count); bp->b_fspriv = iclog; XFS_BUF_ZEROFLAGS(bp); - XFS_BUF_BUSY(bp); XFS_BUF_ASYNC(bp); bp->b_flags |= XBF_SYNCIO; @@ -1398,16 +1395,15 @@ xlog_sync(xlog_t *log, if (split) { bp = iclog->ic_log->l_xbuf; XFS_BUF_SET_ADDR(bp, 0); /* logical 0 */ - XFS_BUF_SET_PTR(bp, (xfs_caddr_t)((__psint_t)&(iclog->ic_header)+ - (__psint_t)count), split); + xfs_buf_associate_memory(bp, + (char *)&iclog->ic_header + count, split); bp->b_fspriv = iclog; XFS_BUF_ZEROFLAGS(bp); - XFS_BUF_BUSY(bp); XFS_BUF_ASYNC(bp); bp->b_flags |= XBF_SYNCIO; if (log->l_mp->m_flags & XFS_MOUNT_BARRIER) bp->b_flags |= XBF_FUA; - dptr = XFS_BUF_PTR(bp); + dptr = bp->b_addr; /* * Bump the cycle numbers at the start of each block * since this part of the buffer is at the start of diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c index 052a2c0ec5f..a199dbcee7d 100644 --- a/fs/xfs/xfs_log_recover.c +++ b/fs/xfs/xfs_log_recover.c @@ -147,7 +147,7 @@ xlog_align( xfs_daddr_t offset = blk_no & ((xfs_daddr_t)log->l_sectBBsize - 1); ASSERT(BBTOB(offset + nbblks) <= XFS_BUF_SIZE(bp)); - return XFS_BUF_PTR(bp) + BBTOB(offset); + return bp->b_addr + BBTOB(offset); } @@ -178,9 +178,7 @@ xlog_bread_noalign( XFS_BUF_SET_ADDR(bp, log->l_logBBstart + blk_no); XFS_BUF_READ(bp); - XFS_BUF_BUSY(bp); XFS_BUF_SET_COUNT(bp, BBTOB(nbblks)); - XFS_BUF_SET_TARGET(bp, log->l_mp->m_logdev_targp); xfsbdstrat(log->l_mp, bp); error = xfs_buf_iowait(bp); @@ -220,18 +218,18 @@ xlog_bread_offset( xfs_buf_t *bp, xfs_caddr_t offset) { - xfs_caddr_t orig_offset = XFS_BUF_PTR(bp); + xfs_caddr_t orig_offset = bp->b_addr; int orig_len = bp->b_buffer_length; int error, error2; - error = XFS_BUF_SET_PTR(bp, offset, BBTOB(nbblks)); + error = xfs_buf_associate_memory(bp, offset, BBTOB(nbblks)); if (error) return error; error = xlog_bread_noalign(log, blk_no, nbblks, bp); /* must reset buffer pointer even on error */ - error2 = XFS_BUF_SET_PTR(bp, orig_offset, orig_len); + error2 = xfs_buf_associate_memory(bp, orig_offset, orig_len); if (error) return error; return error2; @@ -266,11 +264,9 @@ xlog_bwrite( XFS_BUF_SET_ADDR(bp, log->l_logBBstart + blk_no); XFS_BUF_ZEROFLAGS(bp); - XFS_BUF_BUSY(bp); - XFS_BUF_HOLD(bp); + xfs_buf_hold(bp); xfs_buf_lock(bp); XFS_BUF_SET_COUNT(bp, BBTOB(nbblks)); - XFS_BUF_SET_TARGET(bp, log->l_mp->m_logdev_targp); if ((error = xfs_bwrite(log->l_mp, bp))) xfs_ioerror_alert("xlog_bwrite", log->l_mp, @@ -360,7 +356,7 @@ STATIC void xlog_recover_iodone( struct xfs_buf *bp) { - if (XFS_BUF_GETERROR(bp)) { + if (bp->b_error) { /* * We're not going to bother about retrying * this during recovery. One strike! @@ -1262,7 +1258,7 @@ xlog_write_log_records( */ ealign = round_down(end_block, sectbb); if (j == 0 && (start_block + endcount > ealign)) { - offset = XFS_BUF_PTR(bp) + BBTOB(ealign - start_block); + offset = bp->b_addr + BBTOB(ealign - start_block); error = xlog_bread_offset(log, ealign, sectbb, bp, offset); if (error) @@ -2135,15 +2131,16 @@ xlog_recover_buffer_pass2( bp = xfs_buf_read(mp->m_ddev_targp, buf_f->blf_blkno, buf_f->blf_len, buf_flags); - if (XFS_BUF_ISERROR(bp)) { + if (!bp) + return XFS_ERROR(ENOMEM); + error = bp->b_error; + if (error) { xfs_ioerror_alert("xlog_recover_do..(read#1)", mp, bp, buf_f->blf_blkno); - error = XFS_BUF_GETERROR(bp); xfs_buf_relse(bp); return error; } - error = 0; if (buf_f->blf_flags & XFS_BLF_INODE_BUF) { error = xlog_recover_do_inode_buffer(mp, item, bp, buf_f); } else if (buf_f->blf_flags & @@ -2227,14 +2224,17 @@ xlog_recover_inode_pass2( bp = xfs_buf_read(mp->m_ddev_targp, in_f->ilf_blkno, in_f->ilf_len, XBF_LOCK); - if (XFS_BUF_ISERROR(bp)) { + if (!bp) { + error = ENOMEM; + goto error; + } + error = bp->b_error; + if (error) { xfs_ioerror_alert("xlog_recover_do..(read#2)", mp, bp, in_f->ilf_blkno); - error = XFS_BUF_GETERROR(bp); xfs_buf_relse(bp); goto error; } - error = 0; ASSERT(in_f->ilf_fields & XFS_ILOG_CORE); dip = (xfs_dinode_t *)xfs_buf_offset(bp, in_f->ilf_boffset); @@ -3437,7 +3437,7 @@ xlog_do_recovery_pass( /* * Check for header wrapping around physical end-of-log */ - offset = XFS_BUF_PTR(hbp); + offset = hbp->b_addr; split_hblks = 0; wrapped_hblks = 0; if (blk_no + hblks <= log->l_logBBsize) { @@ -3497,7 +3497,7 @@ xlog_do_recovery_pass( } else { /* This log record is split across the * physical end of log */ - offset = XFS_BUF_PTR(dbp); + offset = dbp->b_addr; split_bblks = 0; if (blk_no != log->l_logBBsize) { /* some data is before the physical diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c index 092e16ae4d9..0081657ad98 100644 --- a/fs/xfs/xfs_mount.c +++ b/fs/xfs/xfs_mount.c @@ -1615,7 +1615,7 @@ xfs_unmountfs_writesb(xfs_mount_t *mp) XFS_BUF_UNDELAYWRITE(sbp); XFS_BUF_WRITE(sbp); XFS_BUF_UNASYNC(sbp); - ASSERT(XFS_BUF_TARGET(sbp) == mp->m_ddev_targp); + ASSERT(sbp->b_target == mp->m_ddev_targp); xfsbdstrat(mp, sbp); error = xfs_buf_iowait(sbp); if (error) @@ -1938,7 +1938,7 @@ xfs_getsb( xfs_buf_lock(bp); } - XFS_BUF_HOLD(bp); + xfs_buf_hold(bp); ASSERT(XFS_BUF_ISDONE(bp)); return bp; } diff --git a/fs/xfs/xfs_rtalloc.c b/fs/xfs/xfs_rtalloc.c index 8f76fdff4f4..35561a511b5 100644 --- a/fs/xfs/xfs_rtalloc.c +++ b/fs/xfs/xfs_rtalloc.c @@ -168,7 +168,7 @@ error_cancel: xfs_trans_cancel(tp, cancelflags); goto error; } - memset(XFS_BUF_PTR(bp), 0, mp->m_sb.sb_blocksize); + memset(bp->b_addr, 0, mp->m_sb.sb_blocksize); xfs_trans_log_buf(tp, bp, 0, mp->m_sb.sb_blocksize - 1); /* * Commit the transaction. @@ -883,7 +883,7 @@ xfs_rtbuf_get( if (error) { return error; } - ASSERT(bp && !XFS_BUF_GETERROR(bp)); + ASSERT(!xfs_buf_geterror(bp)); *bpp = bp; return 0; } @@ -943,7 +943,7 @@ xfs_rtcheck_range( if (error) { return error; } - bufp = (xfs_rtword_t *)XFS_BUF_PTR(bp); + bufp = bp->b_addr; /* * Compute the starting word's address, and starting bit. */ @@ -994,7 +994,7 @@ xfs_rtcheck_range( if (error) { return error; } - b = bufp = (xfs_rtword_t *)XFS_BUF_PTR(bp); + b = bufp = bp->b_addr; word = 0; } else { /* @@ -1040,7 +1040,7 @@ xfs_rtcheck_range( if (error) { return error; } - b = bufp = (xfs_rtword_t *)XFS_BUF_PTR(bp); + b = bufp = bp->b_addr; word = 0; } else { /* @@ -1158,7 +1158,7 @@ xfs_rtfind_back( if (error) { return error; } - bufp = (xfs_rtword_t *)XFS_BUF_PTR(bp); + bufp = bp->b_addr; /* * Get the first word's index & point to it. */ @@ -1210,7 +1210,7 @@ xfs_rtfind_back( if (error) { return error; } - bufp = (xfs_rtword_t *)XFS_BUF_PTR(bp); + bufp = bp->b_addr; word = XFS_BLOCKWMASK(mp); b = &bufp[word]; } else { @@ -1256,7 +1256,7 @@ xfs_rtfind_back( if (error) { return error; } - bufp = (xfs_rtword_t *)XFS_BUF_PTR(bp); + bufp = bp->b_addr; word = XFS_BLOCKWMASK(mp); b = &bufp[word]; } else { @@ -1333,7 +1333,7 @@ xfs_rtfind_forw( if (error) { return error; } - bufp = (xfs_rtword_t *)XFS_BUF_PTR(bp); + bufp = bp->b_addr; /* * Get the first word's index & point to it. */ @@ -1384,7 +1384,7 @@ xfs_rtfind_forw( if (error) { return error; } - b = bufp = (xfs_rtword_t *)XFS_BUF_PTR(bp); + b = bufp = bp->b_addr; word = 0; } else { /* @@ -1429,7 +1429,7 @@ xfs_rtfind_forw( if (error) { return error; } - b = bufp = (xfs_rtword_t *)XFS_BUF_PTR(bp); + b = bufp = bp->b_addr; word = 0; } else { /* @@ -1649,7 +1649,7 @@ xfs_rtmodify_range( if (error) { return error; } - bufp = (xfs_rtword_t *)XFS_BUF_PTR(bp); + bufp = bp->b_addr; /* * Compute the starting word's address, and starting bit. */ @@ -1694,7 +1694,7 @@ xfs_rtmodify_range( if (error) { return error; } - first = b = bufp = (xfs_rtword_t *)XFS_BUF_PTR(bp); + first = b = bufp = bp->b_addr; word = 0; } else { /* @@ -1734,7 +1734,7 @@ xfs_rtmodify_range( if (error) { return error; } - first = b = bufp = (xfs_rtword_t *)XFS_BUF_PTR(bp); + first = b = bufp = bp->b_addr; word = 0; } else { /* @@ -1832,8 +1832,8 @@ xfs_rtmodify_summary( */ sp = XFS_SUMPTR(mp, bp, so); *sp += delta; - xfs_trans_log_buf(tp, bp, (uint)((char *)sp - (char *)XFS_BUF_PTR(bp)), - (uint)((char *)sp - (char *)XFS_BUF_PTR(bp) + sizeof(*sp) - 1)); + xfs_trans_log_buf(tp, bp, (uint)((char *)sp - (char *)bp->b_addr), + (uint)((char *)sp - (char *)bp->b_addr + sizeof(*sp) - 1)); return 0; } diff --git a/fs/xfs/xfs_rtalloc.h b/fs/xfs/xfs_rtalloc.h index 09e1f4f35e9..f7f3a359c1c 100644 --- a/fs/xfs/xfs_rtalloc.h +++ b/fs/xfs/xfs_rtalloc.h @@ -47,7 +47,7 @@ struct xfs_trans; #define XFS_SUMOFFSTOBLOCK(mp,s) \ (((s) * (uint)sizeof(xfs_suminfo_t)) >> (mp)->m_sb.sb_blocklog) #define XFS_SUMPTR(mp,bp,so) \ - ((xfs_suminfo_t *)((char *)XFS_BUF_PTR(bp) + \ + ((xfs_suminfo_t *)((bp)->b_addr + \ (((so) * (uint)sizeof(xfs_suminfo_t)) & XFS_BLOCKMASK(mp)))) #define XFS_BITTOBLOCK(mp,bi) ((bi) >> (mp)->m_blkbit_log) diff --git a/fs/xfs/xfs_rw.c b/fs/xfs/xfs_rw.c index d6d6fdfe942..c96a8a05ac0 100644 --- a/fs/xfs/xfs_rw.c +++ b/fs/xfs/xfs_rw.c @@ -104,9 +104,9 @@ xfs_ioerror_alert( xfs_alert(mp, "I/O error occurred: meta-data dev %s block 0x%llx" " (\"%s\") error %d buf count %zd", - XFS_BUFTARG_NAME(XFS_BUF_TARGET(bp)), + xfs_buf_target_name(bp->b_target), (__uint64_t)blkno, func, - XFS_BUF_GETERROR(bp), XFS_BUF_COUNT(bp)); + bp->b_error, XFS_BUF_COUNT(bp)); } /* @@ -137,8 +137,8 @@ xfs_read_buf( bp = xfs_buf_read(target, blkno, len, flags); if (!bp) return XFS_ERROR(EIO); - error = XFS_BUF_GETERROR(bp); - if (bp && !error && !XFS_FORCED_SHUTDOWN(mp)) { + error = bp->b_error; + if (!error && !XFS_FORCED_SHUTDOWN(mp)) { *bpp = bp; } else { *bpp = NULL; diff --git a/fs/xfs/xfs_sb.h b/fs/xfs/xfs_sb.h index 1eb2ba58681..cb6ae715814 100644 --- a/fs/xfs/xfs_sb.h +++ b/fs/xfs/xfs_sb.h @@ -509,7 +509,7 @@ static inline int xfs_sb_version_hasprojid32bit(xfs_sb_t *sbp) #define XFS_SB_DADDR ((xfs_daddr_t)0) /* daddr in filesystem/ag */ #define XFS_SB_BLOCK(mp) XFS_HDR_BLOCK(mp, XFS_SB_DADDR) -#define XFS_BUF_TO_SBP(bp) ((xfs_dsb_t *)XFS_BUF_PTR(bp)) +#define XFS_BUF_TO_SBP(bp) ((xfs_dsb_t *)((bp)->b_addr)) #define XFS_HDR_BLOCK(mp,d) ((xfs_agblock_t)XFS_BB_TO_FSBT(mp,d)) #define XFS_DADDR_TO_FSB(mp,d) XFS_AGB_TO_FSB(mp, \ diff --git a/fs/xfs/xfs_trans_ail.c b/fs/xfs/xfs_trans_ail.c index 43233e92f0f..c15aa29fa16 100644 --- a/fs/xfs/xfs_trans_ail.c +++ b/fs/xfs/xfs_trans_ail.c @@ -299,7 +299,7 @@ xfs_trans_ail_cursor_last( * Splice the log item list into the AIL at the given LSN. We splice to the * tail of the given LSN to maintain insert order for push traversals. The * cursor is optional, allowing repeated updates to the same LSN to avoid - * repeated traversals. + * repeated traversals. This should not be called with an empty list. */ static void xfs_ail_splice( @@ -308,50 +308,39 @@ xfs_ail_splice( struct list_head *list, xfs_lsn_t lsn) { - struct xfs_log_item *lip = cur ? cur->item : NULL; - struct xfs_log_item *next_lip; + struct xfs_log_item *lip; + + ASSERT(!list_empty(list)); /* - * Get a new cursor if we don't have a placeholder or the existing one - * has been invalidated. + * Use the cursor to determine the insertion point if one is + * provided. If not, or if the one we got is not valid, + * find the place in the AIL where the items belong. */ - if (!lip || (__psint_t)lip & 1) { + lip = cur ? cur->item : NULL; + if (!lip || (__psint_t) lip & 1) lip = __xfs_trans_ail_cursor_last(ailp, lsn); - if (!lip) { - /* The list is empty, so just splice and return. */ - if (cur) - cur->item = NULL; - list_splice(list, &ailp->xa_ail); - return; - } - } + /* + * If a cursor is provided, we know we're processing the AIL + * in lsn order, and future items to be spliced in will + * follow the last one being inserted now. Update the + * cursor to point to that last item, now while we have a + * reliable pointer to it. + */ + if (cur) + cur->item = list_entry(list->prev, struct xfs_log_item, li_ail); /* - * Our cursor points to the item we want to insert _after_, so we have - * to update the cursor to point to the end of the list we are splicing - * in so that it points to the correct location for the next splice. - * i.e. before the splice - * - * lsn -> lsn -> lsn + x -> lsn + x ... - * ^ - * | cursor points here - * - * After the splice we have: - * - * lsn -> lsn -> lsn -> lsn -> .... -> lsn -> lsn + x -> lsn + x ... - * ^ ^ - * | cursor points here | needs to move here - * - * So we set the cursor to the last item in the list to be spliced - * before we execute the splice, resulting in the cursor pointing to - * the correct item after the splice occurs. + * Finally perform the splice. Unless the AIL was empty, + * lip points to the item in the AIL _after_ which the new + * items should go. If lip is null the AIL was empty, so + * the new items go at the head of the AIL. */ - if (cur) { - next_lip = list_entry(list->prev, struct xfs_log_item, li_ail); - cur->item = next_lip; - } - list_splice(list, &lip->li_ail); + if (lip) + list_splice(list, &lip->li_ail); + else + list_splice(list, &ailp->xa_ail); } /* @@ -682,6 +671,7 @@ xfs_trans_ail_update_bulk( int i; LIST_HEAD(tmp); + ASSERT(nr_items > 0); /* Not required, but true. */ mlip = xfs_ail_min(ailp); for (i = 0; i < nr_items; i++) { @@ -701,7 +691,8 @@ xfs_trans_ail_update_bulk( list_add(&lip->li_ail, &tmp); } - xfs_ail_splice(ailp, cur, &tmp, lsn); + if (!list_empty(&tmp)) + xfs_ail_splice(ailp, cur, &tmp, lsn); if (!mlip_changed) { spin_unlock(&ailp->xa_lock); diff --git a/fs/xfs/xfs_trans_buf.c b/fs/xfs/xfs_trans_buf.c index 15584fc3ed7..137e2b9e294 100644 --- a/fs/xfs/xfs_trans_buf.c +++ b/fs/xfs/xfs_trans_buf.c @@ -54,7 +54,7 @@ xfs_trans_buf_item_match( list_for_each_entry(lidp, &tp->t_items, lid_trans) { blip = (struct xfs_buf_log_item *)lidp->lid_item; if (blip->bli_item.li_type == XFS_LI_BUF && - XFS_BUF_TARGET(blip->bli_buf) == target && + blip->bli_buf->b_target == target && XFS_BUF_ADDR(blip->bli_buf) == blkno && XFS_BUF_COUNT(blip->bli_buf) == len) return blip->bli_buf; @@ -80,7 +80,6 @@ _xfs_trans_bjoin( { struct xfs_buf_log_item *bip; - ASSERT(XFS_BUF_ISBUSY(bp)); ASSERT(bp->b_transp == NULL); /* @@ -194,7 +193,7 @@ xfs_trans_get_buf(xfs_trans_t *tp, return NULL; } - ASSERT(!XFS_BUF_GETERROR(bp)); + ASSERT(!bp->b_error); _xfs_trans_bjoin(tp, bp, 1); trace_xfs_trans_get_buf(bp->b_fspriv); @@ -293,10 +292,10 @@ xfs_trans_read_buf( return (flags & XBF_TRYLOCK) ? EAGAIN : XFS_ERROR(ENOMEM); - if (XFS_BUF_GETERROR(bp) != 0) { + if (bp->b_error) { + error = bp->b_error; xfs_ioerror_alert("xfs_trans_read_buf", mp, bp, blkno); - error = XFS_BUF_GETERROR(bp); xfs_buf_relse(bp); return error; } @@ -330,7 +329,7 @@ xfs_trans_read_buf( ASSERT(xfs_buf_islocked(bp)); ASSERT(bp->b_transp == tp); ASSERT(bp->b_fspriv != NULL); - ASSERT((XFS_BUF_ISERROR(bp)) == 0); + ASSERT(!bp->b_error); if (!(XFS_BUF_ISDONE(bp))) { trace_xfs_trans_read_buf_io(bp, _RET_IP_); ASSERT(!XFS_BUF_ISASYNC(bp)); @@ -386,10 +385,9 @@ xfs_trans_read_buf( return (flags & XBF_TRYLOCK) ? 0 : XFS_ERROR(ENOMEM); } - if (XFS_BUF_GETERROR(bp) != 0) { - XFS_BUF_SUPER_STALE(bp); - error = XFS_BUF_GETERROR(bp); - + if (bp->b_error) { + error = bp->b_error; + XFS_BUF_SUPER_STALE(bp); xfs_ioerror_alert("xfs_trans_read_buf", mp, bp, blkno); if (tp->t_flags & XFS_TRANS_DIRTY) @@ -430,7 +428,7 @@ shutdown_abort: if (XFS_BUF_ISSTALE(bp) && XFS_BUF_ISDELAYWRITE(bp)) xfs_notice(mp, "about to pop assert, bp == 0x%p", bp); #endif - ASSERT((XFS_BUF_BFLAGS(bp) & (XBF_STALE|XBF_DELWRI)) != + ASSERT((bp->b_flags & (XBF_STALE|XBF_DELWRI)) != (XBF_STALE|XBF_DELWRI)); trace_xfs_trans_read_buf_shut(bp, _RET_IP_); @@ -581,7 +579,6 @@ xfs_trans_bhold(xfs_trans_t *tp, { xfs_buf_log_item_t *bip = bp->b_fspriv; - ASSERT(XFS_BUF_ISBUSY(bp)); ASSERT(bp->b_transp == tp); ASSERT(bip != NULL); ASSERT(!(bip->bli_flags & XFS_BLI_STALE)); @@ -602,7 +599,6 @@ xfs_trans_bhold_release(xfs_trans_t *tp, { xfs_buf_log_item_t *bip = bp->b_fspriv; - ASSERT(XFS_BUF_ISBUSY(bp)); ASSERT(bp->b_transp == tp); ASSERT(bip != NULL); ASSERT(!(bip->bli_flags & XFS_BLI_STALE)); @@ -631,7 +627,6 @@ xfs_trans_log_buf(xfs_trans_t *tp, { xfs_buf_log_item_t *bip = bp->b_fspriv; - ASSERT(XFS_BUF_ISBUSY(bp)); ASSERT(bp->b_transp == tp); ASSERT(bip != NULL); ASSERT((first <= last) && (last < XFS_BUF_COUNT(bp))); @@ -702,7 +697,6 @@ xfs_trans_binval( { xfs_buf_log_item_t *bip = bp->b_fspriv; - ASSERT(XFS_BUF_ISBUSY(bp)); ASSERT(bp->b_transp == tp); ASSERT(bip != NULL); ASSERT(atomic_read(&bip->bli_refcount) > 0); @@ -774,7 +768,6 @@ xfs_trans_inode_buf( { xfs_buf_log_item_t *bip = bp->b_fspriv; - ASSERT(XFS_BUF_ISBUSY(bp)); ASSERT(bp->b_transp == tp); ASSERT(bip != NULL); ASSERT(atomic_read(&bip->bli_refcount) > 0); @@ -798,7 +791,6 @@ xfs_trans_stale_inode_buf( { xfs_buf_log_item_t *bip = bp->b_fspriv; - ASSERT(XFS_BUF_ISBUSY(bp)); ASSERT(bp->b_transp == tp); ASSERT(bip != NULL); ASSERT(atomic_read(&bip->bli_refcount) > 0); @@ -823,7 +815,6 @@ xfs_trans_inode_alloc_buf( { xfs_buf_log_item_t *bip = bp->b_fspriv; - ASSERT(XFS_BUF_ISBUSY(bp)); ASSERT(bp->b_transp == tp); ASSERT(bip != NULL); ASSERT(atomic_read(&bip->bli_refcount) > 0); @@ -851,7 +842,6 @@ xfs_trans_dquot_buf( { xfs_buf_log_item_t *bip = bp->b_fspriv; - ASSERT(XFS_BUF_ISBUSY(bp)); ASSERT(bp->b_transp == tp); ASSERT(bip != NULL); ASSERT(type == XFS_BLF_UDQUOT_BUF || diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c index 9322e13f0c6..51fc429527b 100644 --- a/fs/xfs/xfs_vnodeops.c +++ b/fs/xfs/xfs_vnodeops.c @@ -83,7 +83,9 @@ xfs_readlink_bmap( bp = xfs_buf_read(mp->m_ddev_targp, d, BTOBB(byte_cnt), XBF_LOCK | XBF_MAPPED | XBF_DONT_BLOCK); - error = XFS_BUF_GETERROR(bp); + if (!bp) + return XFS_ERROR(ENOMEM); + error = bp->b_error; if (error) { xfs_ioerror_alert("xfs_readlink", ip->i_mount, bp, XFS_BUF_ADDR(bp)); @@ -94,7 +96,7 @@ xfs_readlink_bmap( byte_cnt = pathlen; pathlen -= byte_cnt; - memcpy(link, XFS_BUF_PTR(bp), byte_cnt); + memcpy(link, bp->b_addr, byte_cnt); xfs_buf_relse(bp); } @@ -1648,13 +1650,13 @@ xfs_symlink( byte_cnt = XFS_FSB_TO_B(mp, mval[n].br_blockcount); bp = xfs_trans_get_buf(tp, mp->m_ddev_targp, d, BTOBB(byte_cnt), 0); - ASSERT(bp && !XFS_BUF_GETERROR(bp)); + ASSERT(!xfs_buf_geterror(bp)); if (pathlen < byte_cnt) { byte_cnt = pathlen; } pathlen -= byte_cnt; - memcpy(XFS_BUF_PTR(bp), cur_chunk, byte_cnt); + memcpy(bp->b_addr, cur_chunk, byte_cnt); cur_chunk += byte_cnt; xfs_trans_log_buf(tp, bp, 0, byte_cnt - 1); @@ -1999,7 +2001,7 @@ xfs_zero_remaining_bytes( mp, bp, XFS_BUF_ADDR(bp)); break; } - memset(XFS_BUF_PTR(bp) + + memset(bp->b_addr + (offset - XFS_FSB_TO_B(mp, imap.br_startoff)), 0, lastoffset - offset + 1); XFS_BUF_UNDONE(bp); diff --git a/include/linux/cred.h b/include/linux/cred.h index 98f46efbe2d..40308969ed0 100644 --- a/include/linux/cred.h +++ b/include/linux/cred.h @@ -269,7 +269,7 @@ static inline void put_cred(const struct cred *_cred) * since nobody else can modify it. */ #define current_cred() \ - (*(__force struct cred **)¤t->cred) + rcu_dereference_protected(current->cred, 1) /** * __task_cred - Access a task's objective credentials @@ -307,7 +307,7 @@ static inline void put_cred(const struct cred *_cred) #define get_current_user() \ ({ \ struct user_struct *__u; \ - struct cred *__cred; \ + const struct cred *__cred; \ __cred = current_cred(); \ __u = get_uid(__cred->user); \ __u; \ @@ -322,7 +322,7 @@ static inline void put_cred(const struct cred *_cred) #define get_current_groups() \ ({ \ struct group_info *__groups; \ - struct cred *__cred; \ + const struct cred *__cred; \ __cred = current_cred(); \ __groups = get_group_info(__cred->group_info); \ __groups; \ diff --git a/include/linux/mm.h b/include/linux/mm.h index f2690cf4982..fd599f4bb84 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -962,6 +962,8 @@ int invalidate_inode_page(struct page *page); #ifdef CONFIG_MMU extern int handle_mm_fault(struct mm_struct *mm, struct vm_area_struct *vma, unsigned long address, unsigned int flags); +extern int fixup_user_fault(struct task_struct *tsk, struct mm_struct *mm, + unsigned long address, unsigned int fault_flags); #else static inline int handle_mm_fault(struct mm_struct *mm, struct vm_area_struct *vma, unsigned long address, @@ -971,6 +973,14 @@ static inline int handle_mm_fault(struct mm_struct *mm, BUG(); return VM_FAULT_SIGBUS; } +static inline int fixup_user_fault(struct task_struct *tsk, + struct mm_struct *mm, unsigned long address, + unsigned int fault_flags) +{ + /* should never happen if there's no MMU */ + BUG(); + return -EFAULT; +} #endif extern int make_pages_present(unsigned long addr, unsigned long end); @@ -988,8 +998,6 @@ int get_user_pages(struct task_struct *tsk, struct mm_struct *mm, int get_user_pages_fast(unsigned long start, int nr_pages, int write, struct page **pages); struct page *get_dump_page(unsigned long addr); -extern int fixup_user_fault(struct task_struct *tsk, struct mm_struct *mm, - unsigned long address, unsigned int fault_flags); extern int try_to_release_page(struct page * page, gfp_t gfp_mask); extern void do_invalidatepage(struct page *page, unsigned long offset); diff --git a/include/linux/of.h b/include/linux/of.h index 0085bb01c04..9180dc5cb00 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -256,6 +256,13 @@ static inline int of_property_read_string(struct device_node *np, return -ENOSYS; } +static inline const void *of_get_property(const struct device_node *node, + const char *name, + int *lenp) +{ + return NULL; +} + #endif /* CONFIG_OF */ static inline int of_property_read_u32(const struct device_node *np, diff --git a/include/linux/sched.h b/include/linux/sched.h index 20b03bf9474..4ac2c0578e0 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1767,6 +1767,7 @@ extern void thread_group_times(struct task_struct *p, cputime_t *ut, cputime_t * #define PF_DUMPCORE 0x00000200 /* dumped core */ #define PF_SIGNALED 0x00000400 /* killed by a signal */ #define PF_MEMALLOC 0x00000800 /* Allocating memory */ +#define PF_NPROC_EXCEEDED 0x00001000 /* set_user noticed that RLIMIT_NPROC was exceeded */ #define PF_USED_MATH 0x00002000 /* if unset the fpu must be initialized before use */ #define PF_FREEZING 0x00004000 /* freeze in progress. do not account to load */ #define PF_NOFREEZE 0x00008000 /* this thread should not be frozen */ diff --git a/include/sound/wm8915.h b/include/sound/wm8996.h index 5817d762f6f..ea4d88f4397 100644 --- a/include/sound/wm8915.h +++ b/include/sound/wm8996.h @@ -1,5 +1,5 @@ /* - * linux/sound/wm8915.h -- Platform data for WM8915 + * linux/sound/wm8996.h -- Platform data for WM8996 * * Copyright 2011 Wolfson Microelectronics. PLC. * @@ -8,14 +8,14 @@ * published by the Free Software Foundation. */ -#ifndef __LINUX_SND_WM8903_H -#define __LINUX_SND_WM8903_H +#ifndef __LINUX_SND_WM8996_H +#define __LINUX_SND_WM8996_H -enum wm8915_inmode { - WM8915_DIFFERRENTIAL_1 = 0, /* IN1xP - IN1xN */ - WM8915_INVERTING = 1, /* IN1xN */ - WM8915_NON_INVERTING = 2, /* IN1xP */ - WM8915_DIFFERENTIAL_2 = 3, /* IN2xP - IN2xP */ +enum wm8996_inmode { + WM8996_DIFFERRENTIAL_1 = 0, /* IN1xP - IN1xN */ + WM8996_INVERTING = 1, /* IN1xN */ + WM8996_NON_INVERTING = 2, /* IN1xP */ + WM8996_DIFFERENTIAL_2 = 3, /* IN2xP - IN2xP */ }; /** @@ -25,23 +25,23 @@ enum wm8915_inmode { * Configurations are expected to be generated using the ReTune Mobile * control panel in WISCE - see http://www.wolfsonmicro.com/wisce/ */ -struct wm8915_retune_mobile_config { +struct wm8996_retune_mobile_config { const char *name; int rate; u16 regs[20]; }; -#define WM8915_SET_DEFAULT 0x10000 +#define WM8996_SET_DEFAULT 0x10000 -struct wm8915_pdata { +struct wm8996_pdata { int irq_flags; /** Set IRQ trigger flags; default active low */ int ldo_ena; /** GPIO for LDO1; -1 for none */ int micdet_def; /** Default MICDET_SRC/HP1FB_SRC/MICD_BIAS */ - enum wm8915_inmode inl_mode; - enum wm8915_inmode inr_mode; + enum wm8996_inmode inl_mode; + enum wm8996_inmode inr_mode; u32 spkmute_seq; /** Value for register 0x802 */ @@ -49,7 +49,7 @@ struct wm8915_pdata { u32 gpio_default[5]; int num_retune_mobile_cfgs; - struct wm8915_retune_mobile_config *retune_mobile_cfgs; + struct wm8996_retune_mobile_config *retune_mobile_cfgs; }; #endif diff --git a/kernel/Makefile b/kernel/Makefile index d06467fc8f7..eca595e2fd5 100644 --- a/kernel/Makefile +++ b/kernel/Makefile @@ -10,7 +10,7 @@ obj-y = sched.o fork.o exec_domain.o panic.o printk.o \ kthread.o wait.o kfifo.o sys_ni.o posix-cpu-timers.o mutex.o \ hrtimer.o rwsem.o nsproxy.o srcu.o semaphore.o \ notifier.o ksysfs.o pm_qos_params.o sched_clock.o cred.o \ - async.o range.o jump_label.o + async.o range.o obj-y += groups.o ifdef CONFIG_FUNCTION_TRACER @@ -107,6 +107,7 @@ obj-$(CONFIG_PERF_EVENTS) += events/ obj-$(CONFIG_USER_RETURN_NOTIFIER) += user-return-notifier.o obj-$(CONFIG_PADATA) += padata.o obj-$(CONFIG_CRASH_DUMP) += crash_dump.o +obj-$(CONFIG_JUMP_LABEL) += jump_label.o ifneq ($(CONFIG_SCHED_OMIT_FRAME_POINTER),y) # According to Alan Modra <alan@linuxcare.com.au>, the -fno-omit-frame-pointer is diff --git a/kernel/cred.c b/kernel/cred.c index 174fa84eca3..8ef31f53c44 100644 --- a/kernel/cred.c +++ b/kernel/cred.c @@ -508,10 +508,8 @@ int commit_creds(struct cred *new) key_fsgid_changed(task); /* do it - * - What if a process setreuid()'s and this brings the - * new uid over his NPROC rlimit? We can check this now - * cheaply with the new uid cache, so if it matters - * we should be checking for it. -DaveM + * RLIMIT_NPROC limits on user->processes have already been checked + * in set_user(). */ alter_cred_subscribers(new, 2); if (new->user != old->user) diff --git a/kernel/fork.c b/kernel/fork.c index e7ceaca8960..8e6b6f4fb27 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -1111,6 +1111,7 @@ static struct task_struct *copy_process(unsigned long clone_flags, p->real_cred->user != INIT_USER) goto bad_fork_free; } + current->flags &= ~PF_NPROC_EXCEEDED; retval = copy_creds(p, clone_flags); if (retval < 0) diff --git a/kernel/printk.c b/kernel/printk.c index 37dff3429ad..836a2ae0ac3 100644 --- a/kernel/printk.c +++ b/kernel/printk.c @@ -318,8 +318,10 @@ static int check_syslog_permissions(int type, bool from_file) return 0; /* For historical reasons, accept CAP_SYS_ADMIN too, with a warning */ if (capable(CAP_SYS_ADMIN)) { - WARN_ONCE(1, "Attempt to access syslog with CAP_SYS_ADMIN " - "but no CAP_SYSLOG (deprecated).\n"); + printk_once(KERN_WARNING "%s (%d): " + "Attempt to access syslog with CAP_SYS_ADMIN " + "but no CAP_SYSLOG (deprecated).\n", + current->comm, task_pid_nr(current)); return 0; } return -EPERM; diff --git a/kernel/sys.c b/kernel/sys.c index a101ba36c44..dd948a1fca4 100644 --- a/kernel/sys.c +++ b/kernel/sys.c @@ -621,11 +621,18 @@ static int set_user(struct cred *new) if (!new_user) return -EAGAIN; + /* + * We don't fail in case of NPROC limit excess here because too many + * poorly written programs don't check set*uid() return code, assuming + * it never fails if called by root. We may still enforce NPROC limit + * for programs doing set*uid()+execve() by harmlessly deferring the + * failure to the execve() stage. + */ if (atomic_read(&new_user->processes) >= rlimit(RLIMIT_NPROC) && - new_user != INIT_USER) { - free_uid(new_user); - return -EAGAIN; - } + new_user != INIT_USER) + current->flags |= PF_NPROC_EXCEEDED; + else + current->flags &= ~PF_NPROC_EXCEEDED; free_uid(new->user); new->user = new_user; diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig index 2ad39e556cb..cd3134510f3 100644 --- a/kernel/trace/Kconfig +++ b/kernel/trace/Kconfig @@ -82,7 +82,7 @@ config EVENT_POWER_TRACING_DEPRECATED power:power_frequency This is for userspace compatibility and will vanish after 5 kernel iterations, - namely 2.6.41. + namely 3.1. config CONTEXT_SWITCH_TRACER bool diff --git a/mm/memcontrol.c b/mm/memcontrol.c index f4ec4e7ca4c..930de943727 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -2091,6 +2091,7 @@ struct memcg_stock_pcp { #define FLUSHING_CACHED_CHARGE (0) }; static DEFINE_PER_CPU(struct memcg_stock_pcp, memcg_stock); +static DEFINE_MUTEX(percpu_charge_mutex); /* * Try to consume stocked charge on this cpu. If success, one page is consumed @@ -2197,8 +2198,7 @@ static void drain_all_stock(struct mem_cgroup *root_mem, bool sync) for_each_online_cpu(cpu) { struct memcg_stock_pcp *stock = &per_cpu(memcg_stock, cpu); - if (mem_cgroup_same_or_subtree(root_mem, stock->cached) && - test_bit(FLUSHING_CACHED_CHARGE, &stock->flags)) + if (test_bit(FLUSHING_CACHED_CHARGE, &stock->flags)) flush_work(&stock->work); } out: @@ -2213,14 +2213,22 @@ out: */ static void drain_all_stock_async(struct mem_cgroup *root_mem) { + /* + * If someone calls draining, avoid adding more kworker runs. + */ + if (!mutex_trylock(&percpu_charge_mutex)) + return; drain_all_stock(root_mem, false); + mutex_unlock(&percpu_charge_mutex); } /* This is a synchronous drain interface. */ static void drain_all_stock_sync(struct mem_cgroup *root_mem) { /* called when force_empty is called */ + mutex_lock(&percpu_charge_mutex); drain_all_stock(root_mem, true); + mutex_unlock(&percpu_charge_mutex); } /* diff --git a/mm/slub.c b/mm/slub.c index eb5a8f93338..9f662d70eb4 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -701,7 +701,7 @@ static u8 *check_bytes(u8 *start, u8 value, unsigned int bytes) return check_bytes8(start, value, bytes); value64 = value | value << 8 | value << 16 | value << 24; - value64 = value64 | value64 << 32; + value64 = (value64 & 0xffffffff) | value64 << 32; prefix = 8 - ((unsigned long)start) % 8; if (prefix) { @@ -1854,7 +1854,7 @@ redo: new.frozen = 0; - if (!new.inuse && n->nr_partial < s->min_partial) + if (!new.inuse && n->nr_partial > s->min_partial) m = M_FREE; else if (new.freelist) { m = M_PARTIAL; @@ -2387,11 +2387,13 @@ static void __slab_free(struct kmem_cache *s, struct page *page, slab_empty: if (prior) { /* - * Slab still on the partial list. + * Slab on the partial list. */ remove_partial(n, page); stat(s, FREE_REMOVE_PARTIAL); - } + } else + /* Slab must be on the full list */ + remove_full(s, page); spin_unlock_irqrestore(&n->list_lock, flags); stat(s, FREE_SLAB); diff --git a/net/8021q/vlan_core.c b/net/8021q/vlan_core.c index 5f27f8e3025..f1f2f7bb666 100644 --- a/net/8021q/vlan_core.c +++ b/net/8021q/vlan_core.c @@ -167,6 +167,8 @@ struct sk_buff *vlan_untag(struct sk_buff *skb) if (unlikely(!skb)) goto err_free; + skb_reset_network_header(skb); + skb_reset_transport_header(skb); return skb; err_free: diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c index 3176e2e13d9..2cdf0070419 100644 --- a/net/bridge/br_if.c +++ b/net/bridge/br_if.c @@ -417,6 +417,7 @@ put_back: int br_del_if(struct net_bridge *br, struct net_device *dev) { struct net_bridge_port *p; + bool changed_addr; p = br_port_get_rtnl(dev); if (!p || p->br != br) @@ -425,9 +426,12 @@ int br_del_if(struct net_bridge *br, struct net_device *dev) del_nbp(p); spin_lock_bh(&br->lock); - br_stp_recalculate_bridge_id(br); + changed_addr = br_stp_recalculate_bridge_id(br); spin_unlock_bh(&br->lock); + if (changed_addr) + call_netdevice_notifiers(NETDEV_CHANGEADDR, br->dev); + netdev_update_features(br->dev); return 0; diff --git a/net/bridge/br_notify.c b/net/bridge/br_notify.c index 6545ee9591d..a76b6213555 100644 --- a/net/bridge/br_notify.c +++ b/net/bridge/br_notify.c @@ -34,6 +34,7 @@ static int br_device_event(struct notifier_block *unused, unsigned long event, v struct net_device *dev = ptr; struct net_bridge_port *p; struct net_bridge *br; + bool changed_addr; int err; /* register of bridge completed, add sysfs entries */ @@ -57,8 +58,12 @@ static int br_device_event(struct notifier_block *unused, unsigned long event, v case NETDEV_CHANGEADDR: spin_lock_bh(&br->lock); br_fdb_changeaddr(p, dev->dev_addr); - br_stp_recalculate_bridge_id(br); + changed_addr = br_stp_recalculate_bridge_id(br); spin_unlock_bh(&br->lock); + + if (changed_addr) + call_netdevice_notifiers(NETDEV_CHANGEADDR, br->dev); + break; case NETDEV_CHANGE: diff --git a/net/bridge/netfilter/ebtables.c b/net/bridge/netfilter/ebtables.c index 2b5ca1a0054..5864cc49136 100644 --- a/net/bridge/netfilter/ebtables.c +++ b/net/bridge/netfilter/ebtables.c @@ -1198,7 +1198,8 @@ ebt_register_table(struct net *net, const struct ebt_table *input_table) if (table->check && table->check(newinfo, table->valid_hooks)) { BUGPRINT("The table doesn't like its own initial data, lol\n"); - return ERR_PTR(-EINVAL); + ret = -EINVAL; + goto free_chainstack; } table->private = newinfo; diff --git a/net/core/scm.c b/net/core/scm.c index 4c1ef026d69..811b53fb330 100644 --- a/net/core/scm.c +++ b/net/core/scm.c @@ -192,7 +192,7 @@ int __scm_send(struct socket *sock, struct msghdr *msg, struct scm_cookie *p) goto error; cred->uid = cred->euid = p->creds.uid; - cred->gid = cred->egid = p->creds.uid; + cred->gid = cred->egid = p->creds.gid; put_cred(p->cred); p->cred = cred; } diff --git a/net/ipv4/route.c b/net/ipv4/route.c index d6e32138f71..2c21d3be891 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -722,7 +722,7 @@ static inline bool compare_hash_inputs(const struct rtable *rt1, { return ((((__force u32)rt1->rt_key_dst ^ (__force u32)rt2->rt_key_dst) | ((__force u32)rt1->rt_key_src ^ (__force u32)rt2->rt_key_src) | - (rt1->rt_iif ^ rt2->rt_iif)) == 0); + (rt1->rt_route_iif ^ rt2->rt_route_iif)) == 0); } static inline int compare_keys(struct rtable *rt1, struct rtable *rt2) @@ -732,8 +732,7 @@ static inline int compare_keys(struct rtable *rt1, struct rtable *rt2) (rt1->rt_mark ^ rt2->rt_mark) | (rt1->rt_key_tos ^ rt2->rt_key_tos) | (rt1->rt_route_iif ^ rt2->rt_route_iif) | - (rt1->rt_oif ^ rt2->rt_oif) | - (rt1->rt_iif ^ rt2->rt_iif)) == 0; + (rt1->rt_oif ^ rt2->rt_oif)) == 0; } static inline int compare_netns(struct rtable *rt1, struct rtable *rt2) @@ -2321,9 +2320,8 @@ int ip_route_input_common(struct sk_buff *skb, __be32 daddr, __be32 saddr, rth = rcu_dereference(rth->dst.rt_next)) { if ((((__force u32)rth->rt_key_dst ^ (__force u32)daddr) | ((__force u32)rth->rt_key_src ^ (__force u32)saddr) | - (rth->rt_iif ^ iif) | + (rth->rt_route_iif ^ iif) | (rth->rt_key_tos ^ tos)) == 0 && - rt_is_input_route(rth) && rth->rt_mark == skb->mark && net_eq(dev_net(rth->dst.dev), net) && !rt_is_expired(rth)) { diff --git a/net/ipv4/syncookies.c b/net/ipv4/syncookies.c index 92bb9434b33..3bc5c8f7c71 100644 --- a/net/ipv4/syncookies.c +++ b/net/ipv4/syncookies.c @@ -276,7 +276,7 @@ struct sock *cookie_v4_check(struct sock *sk, struct sk_buff *skb, int mss; struct rtable *rt; __u8 rcv_wscale; - bool ecn_ok; + bool ecn_ok = false; if (!sysctl_tcp_syncookies || !th->ack || th->rst) goto out; diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c index 9cb191ecaba..147ede38ab4 100644 --- a/net/ipv6/ipv6_sockglue.c +++ b/net/ipv6/ipv6_sockglue.c @@ -913,7 +913,7 @@ static int ipv6_getsockopt_sticky(struct sock *sk, struct ipv6_txoptions *opt, } static int do_ipv6_getsockopt(struct sock *sk, int level, int optname, - char __user *optval, int __user *optlen) + char __user *optval, int __user *optlen, unsigned flags) { struct ipv6_pinfo *np = inet6_sk(sk); int len; @@ -962,7 +962,7 @@ static int do_ipv6_getsockopt(struct sock *sk, int level, int optname, msg.msg_control = optval; msg.msg_controllen = len; - msg.msg_flags = 0; + msg.msg_flags = flags; lock_sock(sk); skb = np->pktoptions; @@ -1222,7 +1222,7 @@ int ipv6_getsockopt(struct sock *sk, int level, int optname, if(level != SOL_IPV6) return -ENOPROTOOPT; - err = do_ipv6_getsockopt(sk, level, optname, optval, optlen); + err = do_ipv6_getsockopt(sk, level, optname, optval, optlen, 0); #ifdef CONFIG_NETFILTER /* we need to exclude all possible ENOPROTOOPTs except default case */ if (err == -ENOPROTOOPT && optname != IPV6_2292PKTOPTIONS) { @@ -1264,7 +1264,8 @@ int compat_ipv6_getsockopt(struct sock *sk, int level, int optname, return compat_mc_getsockopt(sk, level, optname, optval, optlen, ipv6_getsockopt); - err = do_ipv6_getsockopt(sk, level, optname, optval, optlen); + err = do_ipv6_getsockopt(sk, level, optname, optval, optlen, + MSG_CMSG_COMPAT); #ifdef CONFIG_NETFILTER /* we need to exclude all possible ENOPROTOOPTs except default case */ if (err == -ENOPROTOOPT && optname != IPV6_2292PKTOPTIONS) { diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c index e48a41c133f..a7a18602a04 100644 --- a/net/ipv6/sit.c +++ b/net/ipv6/sit.c @@ -672,6 +672,9 @@ static netdev_tx_t ipip6_tunnel_xmit(struct sk_buff *skb, if (skb->protocol != htons(ETH_P_IPV6)) goto tx_error; + if (tos == 1) + tos = ipv6_get_dsfield(iph6); + /* ISATAP (RFC4214) - must come before 6to4 */ if (dev->priv_flags & IFF_ISATAP) { struct neighbour *neigh = NULL; diff --git a/net/ipv6/syncookies.c b/net/ipv6/syncookies.c index 89d5bf80622..ac838965ff3 100644 --- a/net/ipv6/syncookies.c +++ b/net/ipv6/syncookies.c @@ -165,7 +165,7 @@ struct sock *cookie_v6_check(struct sock *sk, struct sk_buff *skb) int mss; struct dst_entry *dst; __u8 rcv_wscale; - bool ecn_ok; + bool ecn_ok = false; if (!sysctl_tcp_syncookies || !th->ack || th->rst) goto out; diff --git a/net/netlabel/netlabel_kapi.c b/net/netlabel/netlabel_kapi.c index 58107d06084..9c24de10a65 100644 --- a/net/netlabel/netlabel_kapi.c +++ b/net/netlabel/netlabel_kapi.c @@ -341,11 +341,11 @@ int netlbl_cfg_cipsov4_map_add(u32 doi, entry = kzalloc(sizeof(*entry), GFP_ATOMIC); if (entry == NULL) - return -ENOMEM; + goto out_entry; if (domain != NULL) { entry->domain = kstrdup(domain, GFP_ATOMIC); if (entry->domain == NULL) - goto cfg_cipsov4_map_add_failure; + goto out_domain; } if (addr == NULL && mask == NULL) { @@ -354,13 +354,13 @@ int netlbl_cfg_cipsov4_map_add(u32 doi, } else if (addr != NULL && mask != NULL) { addrmap = kzalloc(sizeof(*addrmap), GFP_ATOMIC); if (addrmap == NULL) - goto cfg_cipsov4_map_add_failure; + goto out_addrmap; INIT_LIST_HEAD(&addrmap->list4); INIT_LIST_HEAD(&addrmap->list6); addrinfo = kzalloc(sizeof(*addrinfo), GFP_ATOMIC); if (addrinfo == NULL) - goto cfg_cipsov4_map_add_failure; + goto out_addrinfo; addrinfo->type_def.cipsov4 = doi_def; addrinfo->type = NETLBL_NLTYPE_CIPSOV4; addrinfo->list.addr = addr->s_addr & mask->s_addr; @@ -374,7 +374,7 @@ int netlbl_cfg_cipsov4_map_add(u32 doi, entry->type = NETLBL_NLTYPE_ADDRSELECT; } else { ret_val = -EINVAL; - goto cfg_cipsov4_map_add_failure; + goto out_addrmap; } ret_val = netlbl_domhsh_add(entry, audit_info); @@ -384,11 +384,15 @@ int netlbl_cfg_cipsov4_map_add(u32 doi, return 0; cfg_cipsov4_map_add_failure: - cipso_v4_doi_putdef(doi_def); + kfree(addrinfo); +out_addrinfo: + kfree(addrmap); +out_addrmap: kfree(entry->domain); +out_domain: kfree(entry); - kfree(addrmap); - kfree(addrinfo); +out_entry: + cipso_v4_doi_putdef(doi_def); return ret_val; } diff --git a/net/sched/act_mirred.c b/net/sched/act_mirred.c index 102fc212cd6..e051398fdf6 100644 --- a/net/sched/act_mirred.c +++ b/net/sched/act_mirred.c @@ -196,8 +196,7 @@ static int tcf_mirred(struct sk_buff *skb, const struct tc_action *a, skb2->skb_iif = skb->dev->ifindex; skb2->dev = dev; - dev_queue_xmit(skb2); - err = 0; + err = dev_queue_xmit(skb2); out: if (err) { diff --git a/net/sched/sch_prio.c b/net/sched/sch_prio.c index 2a318f2dc3e..b5d56a22b1d 100644 --- a/net/sched/sch_prio.c +++ b/net/sched/sch_prio.c @@ -112,7 +112,7 @@ static struct sk_buff *prio_dequeue(struct Qdisc *sch) for (prio = 0; prio < q->bands; prio++) { struct Qdisc *qdisc = q->queues[prio]; - struct sk_buff *skb = qdisc->dequeue(qdisc); + struct sk_buff *skb = qdisc_dequeue_peeked(qdisc); if (skb) { qdisc_bstats_update(sch, skb); sch->q.qlen--; diff --git a/security/tomoyo/common.c b/security/tomoyo/common.c index c8439cf2a44..2e43aec1c36 100644 --- a/security/tomoyo/common.c +++ b/security/tomoyo/common.c @@ -710,8 +710,10 @@ static void tomoyo_read_profile(struct tomoyo_io_buffer *head) head->r.index++) if (ns->profile_ptr[head->r.index]) break; - if (head->r.index == TOMOYO_MAX_PROFILES) + if (head->r.index == TOMOYO_MAX_PROFILES) { + head->r.eof = true; return; + } head->r.step++; break; case 2: @@ -723,6 +725,7 @@ static void tomoyo_read_profile(struct tomoyo_io_buffer *head) tomoyo_io_printf(head, "%u-COMMENT=", index); tomoyo_set_string(head, comment ? comment->name : ""); tomoyo_set_lf(head); + tomoyo_print_namespace(head); tomoyo_io_printf(head, "%u-PREFERENCE={ ", index); for (i = 0; i < TOMOYO_MAX_PREF; i++) tomoyo_io_printf(head, "%s=%u ", diff --git a/sound/core/timer.c b/sound/core/timer.c index 7c1cbf0a0dc..67ebf1c21c0 100644 --- a/sound/core/timer.c +++ b/sound/core/timer.c @@ -328,6 +328,8 @@ int snd_timer_close(struct snd_timer_instance *timeri) mutex_unlock(®ister_mutex); } else { timer = timeri->timer; + if (snd_BUG_ON(!timer)) + goto out; /* wait, until the active callback is finished */ spin_lock_irq(&timer->lock); while (timeri->flags & SNDRV_TIMER_IFLG_CALLBACK) { @@ -353,6 +355,7 @@ int snd_timer_close(struct snd_timer_instance *timeri) } mutex_unlock(®ister_mutex); } + out: if (timeri->private_free) timeri->private_free(timeri); kfree(timeri->owner); @@ -531,6 +534,8 @@ int snd_timer_stop(struct snd_timer_instance *timeri) if (err < 0) return err; timer = timeri->timer; + if (!timer) + return -EINVAL; spin_lock_irqsave(&timer->lock, flags); timeri->cticks = timeri->ticks; timeri->pticks = 0; diff --git a/sound/oss/pas2_pcm.c b/sound/oss/pas2_pcm.c index 8f7d175767a..6f13ab4afc6 100644 --- a/sound/oss/pas2_pcm.c +++ b/sound/oss/pas2_pcm.c @@ -63,13 +63,13 @@ static int pcm_set_speed(int arg) if (pcm_channels & 2) { - foo = ((CLOCK_TICK_RATE / 2) + (arg / 2)) / arg; - arg = ((CLOCK_TICK_RATE / 2) + (foo / 2)) / foo; + foo = ((PIT_TICK_RATE / 2) + (arg / 2)) / arg; + arg = ((PIT_TICK_RATE / 2) + (foo / 2)) / foo; } else { - foo = (CLOCK_TICK_RATE + (arg / 2)) / arg; - arg = (CLOCK_TICK_RATE + (foo / 2)) / foo; + foo = (PIT_TICK_RATE + (arg / 2)) / arg; + arg = (PIT_TICK_RATE + (foo / 2)) / foo; } pcm_speed = arg; diff --git a/sound/oss/pss.c b/sound/oss/pss.c index 9b800ce5100..2fc0624024b 100644 --- a/sound/oss/pss.c +++ b/sound/oss/pss.c @@ -673,7 +673,8 @@ static void configure_nonsound_components(void) if (pss_cdrom_port == -1) { /* If cdrom port enablation wasn't requested */ printk(KERN_INFO "PSS: CDROM port not enabled.\n"); - } else if (check_region(pss_cdrom_port, 2)) { + } else if (!request_region(pss_cdrom_port, 2, "PSS CDROM")) { + pss_cdrom_port = -1; printk(KERN_ERR "PSS: CDROM I/O port conflict.\n"); } else { set_io_base(devc, CONF_CDROM, pss_cdrom_port); @@ -1232,7 +1233,8 @@ static void __exit cleanup_pss(void) if(pssmpu) unload_pss_mpu(&cfg_mpu); unload_pss(&cfg); - } + } else if (pss_cdrom_port != -1) + release_region(pss_cdrom_port, 2); if(!pss_keep_settings) /* Keep hardware settings if asked */ { diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig index 50abf5bf8e0..88168044375 100644 --- a/sound/pci/Kconfig +++ b/sound/pci/Kconfig @@ -1,5 +1,10 @@ # ALSA PCI drivers +config SND_TEA575X + tristate + depends on SND_FM801_TEA575X_BOOL || SND_ES1968_RADIO || RADIO_SF16FMR2 + default SND_FM801 || SND_ES1968 || RADIO_SF16FMR2 + menuconfig SND_PCI bool "PCI sound devices" depends on PCI @@ -563,11 +568,6 @@ config SND_FM801_TEA575X_BOOL FM801 chip with a TEA5757 tuner (MediaForte SF256-PCS, SF256-PCP and SF64-PCR) into the snd-fm801 driver. -config SND_TEA575X - tristate - depends on SND_FM801_TEA575X_BOOL || SND_ES1968_RADIO || RADIO_SF16FMR2 - default SND_FM801 || SND_ES1968 || RADIO_SF16FMR2 - source "sound/pci/hda/Kconfig" config SND_HDSP diff --git a/sound/pci/asihpi/hpicmn.c b/sound/pci/asihpi/hpicmn.c index 65b7ca13115..bd47521b24e 100644 --- a/sound/pci/asihpi/hpicmn.c +++ b/sound/pci/asihpi/hpicmn.c @@ -631,13 +631,12 @@ struct hpi_control_cache *hpi_alloc_control_cache(const u32 control_count, if (!p_cache) return NULL; - p_cache->p_info = - kmalloc(sizeof(*p_cache->p_info) * control_count, GFP_KERNEL); + p_cache->p_info = kzalloc(sizeof(*p_cache->p_info) * control_count, + GFP_KERNEL); if (!p_cache->p_info) { kfree(p_cache); return NULL; } - memset(p_cache->p_info, 0, sizeof(*p_cache->p_info) * control_count); p_cache->cache_size_in_bytes = size_in_bytes; p_cache->control_count = control_count; p_cache->p_cache = p_dsp_control_buffer; diff --git a/sound/pci/hda/alc269_quirks.c b/sound/pci/hda/alc269_quirks.c index 14fdcf29b15..5ac0e2162a4 100644 --- a/sound/pci/hda/alc269_quirks.c +++ b/sound/pci/hda/alc269_quirks.c @@ -531,17 +531,10 @@ static const struct snd_pci_quirk alc269_cfg_tbl[] = { SND_PCI_QUIRK(0x1043, 0x1653, "ASUS U50", ALC269_AMIC), SND_PCI_QUIRK(0x1043, 0x1693, "ASUS F50N", ALC269_AMIC), SND_PCI_QUIRK(0x1043, 0x16a3, "ASUS F5Q", ALC269_AMIC), - SND_PCI_QUIRK(0x1043, 0x16e3, "ASUS UX50", ALC269_DMIC), SND_PCI_QUIRK(0x1043, 0x1723, "ASUS P80", ALC269_AMIC), SND_PCI_QUIRK(0x1043, 0x1743, "ASUS U80", ALC269_AMIC), SND_PCI_QUIRK(0x1043, 0x1773, "ASUS U20A", ALC269_AMIC), SND_PCI_QUIRK(0x1043, 0x1883, "ASUS F81Se", ALC269_AMIC), - SND_PCI_QUIRK(0x1043, 0x831a, "ASUS Eeepc P901", - ALC269_DMIC), - SND_PCI_QUIRK(0x1043, 0x834a, "ASUS Eeepc S101", - ALC269_DMIC), - SND_PCI_QUIRK(0x1043, 0x8398, "ASUS P1005HA", ALC269_DMIC), - SND_PCI_QUIRK(0x1043, 0x83ce, "ASUS P1005HA", ALC269_DMIC), SND_PCI_QUIRK(0x104d, 0x9071, "Sony VAIO", ALC269_AUTO), SND_PCI_QUIRK(0x10cf, 0x1475, "Lifebook ICH9M-based", ALC269_LIFEBOOK), SND_PCI_QUIRK(0x152d, 0x1778, "Quanta ON1", ALC269_DMIC), diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index e125c60fe35..9a1aa09f47f 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -4484,6 +4484,22 @@ static void alc269_fixup_pcm_44k(struct hda_codec *codec, spec->stream_analog_capture = &alc269_44k_pcm_analog_capture; } +static void alc269_fixup_stereo_dmic(struct hda_codec *codec, + const struct alc_fixup *fix, int action) +{ + int coef; + + if (action != ALC_FIXUP_ACT_INIT) + return; + /* The digital-mic unit sends PDM (differential signal) instead of + * the standard PCM, thus you can't record a valid mono stream as is. + * Below is a workaround specific to ALC269 to control the dmic + * signal source as mono. + */ + coef = alc_read_coef_idx(codec, 0x07); + alc_write_coef_idx(codec, 0x07, coef | 0x80); +} + enum { ALC269_FIXUP_SONY_VAIO, ALC275_FIXUP_SONY_VAIO_GPIO2, @@ -4494,6 +4510,7 @@ enum { ALC275_FIXUP_SONY_HWEQ, ALC271_FIXUP_DMIC, ALC269_FIXUP_PCM_44K, + ALC269_FIXUP_STEREO_DMIC, }; static const struct alc_fixup alc269_fixups[] = { @@ -4556,10 +4573,19 @@ static const struct alc_fixup alc269_fixups[] = { .type = ALC_FIXUP_FUNC, .v.func = alc269_fixup_pcm_44k, }, + [ALC269_FIXUP_STEREO_DMIC] = { + .type = ALC_FIXUP_FUNC, + .v.func = alc269_fixup_stereo_dmic, + }, }; static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1043, 0x1a13, "Asus G73Jw", ALC269_FIXUP_ASUS_G73JW), + SND_PCI_QUIRK(0x1043, 0x16e3, "ASUS UX50", ALC269_FIXUP_STEREO_DMIC), + SND_PCI_QUIRK(0x1043, 0x831a, "ASUS P901", ALC269_FIXUP_STEREO_DMIC), + SND_PCI_QUIRK(0x1043, 0x834a, "ASUS S101", ALC269_FIXUP_STEREO_DMIC), + SND_PCI_QUIRK(0x1043, 0x8398, "ASUS P1005", ALC269_FIXUP_STEREO_DMIC), + SND_PCI_QUIRK(0x1043, 0x83ce, "ASUS P1005", ALC269_FIXUP_STEREO_DMIC), SND_PCI_QUIRK(0x104d, 0x9073, "Sony VAIO", ALC275_FIXUP_SONY_VAIO_GPIO2), SND_PCI_QUIRK(0x104d, 0x907b, "Sony VAIO", ALC275_FIXUP_SONY_HWEQ), SND_PCI_QUIRK(0x104d, 0x9084, "Sony VAIO", ALC275_FIXUP_SONY_HWEQ), diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c index 84d8798bf33..4ebfbd874c9 100644 --- a/sound/pci/hda/patch_via.c +++ b/sound/pci/hda/patch_via.c @@ -2084,7 +2084,7 @@ static int via_auto_create_speaker_ctls(struct hda_codec *codec) struct via_spec *spec = codec->spec; struct nid_path *path; bool check_dac; - hda_nid_t pin, dac; + hda_nid_t pin, dac = 0; int err; pin = spec->autocfg.speaker_pins[0]; diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c index 6edc67ced90..493e3946756 100644 --- a/sound/pci/rme9652/hdspm.c +++ b/sound/pci/rme9652/hdspm.c @@ -1339,6 +1339,10 @@ static u64 hdspm_calc_dds_value(struct hdspm *hdspm, u64 period) break; case MADIface: freq_const = 131072000000000ULL; + break; + default: + snd_BUG(); + return 0; } return div_u64(freq_const, period); @@ -1356,16 +1360,19 @@ static void hdspm_set_dds_value(struct hdspm *hdspm, int rate) switch (hdspm->io_type) { case MADIface: - n = 131072000000000ULL; /* 125 MHz */ - break; + n = 131072000000000ULL; /* 125 MHz */ + break; case MADI: case AES32: - n = 110069313433624ULL; /* 105 MHz */ - break; + n = 110069313433624ULL; /* 105 MHz */ + break; case RayDAT: case AIO: - n = 104857600000000ULL; /* 100 MHz */ - break; + n = 104857600000000ULL; /* 100 MHz */ + break; + default: + snd_BUG(); + return; } n = div_u64(n, rate); diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 379b2e3afd9..665d9240c4a 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -78,7 +78,6 @@ config SND_SOC_ALL_CODECS select SND_SOC_WM8900 if I2C select SND_SOC_WM8903 if I2C select SND_SOC_WM8904 if I2C - select SND_SOC_WM8915 if I2C select SND_SOC_WM8940 if I2C select SND_SOC_WM8955 if I2C select SND_SOC_WM8960 if I2C @@ -95,6 +94,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_WM8993 if I2C select SND_SOC_WM8994 if MFD_WM8994 select SND_SOC_WM8995 if SND_SOC_I2C_AND_SPI + select SND_SOC_WM8996 if I2C select SND_SOC_WM9081 if I2C select SND_SOC_WM9090 if I2C select SND_SOC_WM9705 if SND_SOC_AC97_BUS @@ -329,9 +329,6 @@ config SND_SOC_WM8903 config SND_SOC_WM8904 tristate -config SND_SOC_WM8915 - tristate - config SND_SOC_WM8940 tristate @@ -380,6 +377,9 @@ config SND_SOC_WM8994 config SND_SOC_WM8995 tristate +config SND_SOC_WM8996 + tristate + config SND_SOC_WM9081 tristate diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index da9990fb856..5119a7e2c1a 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -63,7 +63,7 @@ snd-soc-wm8804-objs := wm8804.o snd-soc-wm8900-objs := wm8900.o snd-soc-wm8903-objs := wm8903.o snd-soc-wm8904-objs := wm8904.o -snd-soc-wm8915-objs := wm8915.o +snd-soc-wm8996-objs := wm8996.o snd-soc-wm8940-objs := wm8940.o snd-soc-wm8955-objs := wm8955.o snd-soc-wm8960-objs := wm8960.o @@ -160,7 +160,7 @@ obj-$(CONFIG_SND_SOC_WM8804) += snd-soc-wm8804.o obj-$(CONFIG_SND_SOC_WM8900) += snd-soc-wm8900.o obj-$(CONFIG_SND_SOC_WM8903) += snd-soc-wm8903.o obj-$(CONFIG_SND_SOC_WM8904) += snd-soc-wm8904.o -obj-$(CONFIG_SND_SOC_WM8915) += snd-soc-wm8915.o +obj-$(CONFIG_SND_SOC_WM8996) += snd-soc-wm8996.o obj-$(CONFIG_SND_SOC_WM8940) += snd-soc-wm8940.o obj-$(CONFIG_SND_SOC_WM8955) += snd-soc-wm8955.o obj-$(CONFIG_SND_SOC_WM8960) += snd-soc-wm8960.o diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index 76258f2a2ff..7e4066e131e 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -33,73 +33,31 @@ #define SGTL5000_DAP_REG_OFFSET 0x0100 #define SGTL5000_MAX_REG_OFFSET 0x013A -/* default value of sgtl5000 registers except DAP */ -static const u16 sgtl5000_regs[SGTL5000_MAX_REG_OFFSET >> 1] = { - 0xa011, /* 0x0000, CHIP_ID. 11 stand for revison 17 */ - 0x0000, /* 0x0002, CHIP_DIG_POWER. */ - 0x0008, /* 0x0004, CHIP_CKL_CTRL */ - 0x0010, /* 0x0006, CHIP_I2S_CTRL */ - 0x0000, /* 0x0008, reserved */ - 0x0008, /* 0x000A, CHIP_SSS_CTRL */ - 0x0000, /* 0x000C, reserved */ - 0x020c, /* 0x000E, CHIP_ADCDAC_CTRL */ - 0x3c3c, /* 0x0010, CHIP_DAC_VOL */ - 0x0000, /* 0x0012, reserved */ - 0x015f, /* 0x0014, CHIP_PAD_STRENGTH */ - 0x0000, /* 0x0016, reserved */ - 0x0000, /* 0x0018, reserved */ - 0x0000, /* 0x001A, reserved */ - 0x0000, /* 0x001E, reserved */ - 0x0000, /* 0x0020, CHIP_ANA_ADC_CTRL */ - 0x1818, /* 0x0022, CHIP_ANA_HP_CTRL */ - 0x0111, /* 0x0024, CHIP_ANN_CTRL */ - 0x0000, /* 0x0026, CHIP_LINREG_CTRL */ - 0x0000, /* 0x0028, CHIP_REF_CTRL */ - 0x0000, /* 0x002A, CHIP_MIC_CTRL */ - 0x0000, /* 0x002C, CHIP_LINE_OUT_CTRL */ - 0x0404, /* 0x002E, CHIP_LINE_OUT_VOL */ - 0x7060, /* 0x0030, CHIP_ANA_POWER */ - 0x5000, /* 0x0032, CHIP_PLL_CTRL */ - 0x0000, /* 0x0034, CHIP_CLK_TOP_CTRL */ - 0x0000, /* 0x0036, CHIP_ANA_STATUS */ - 0x0000, /* 0x0038, reserved */ - 0x0000, /* 0x003A, CHIP_ANA_TEST2 */ - 0x0000, /* 0x003C, CHIP_SHORT_CTRL */ - 0x0000, /* reserved */ -}; - -/* default value of dap registers */ -static const u16 sgtl5000_dap_regs[] = { - 0x0000, /* 0x0100, DAP_CONTROL */ - 0x0000, /* 0x0102, DAP_PEQ */ - 0x0040, /* 0x0104, DAP_BASS_ENHANCE */ - 0x051f, /* 0x0106, DAP_BASS_ENHANCE_CTRL */ - 0x0000, /* 0x0108, DAP_AUDIO_EQ */ - 0x0040, /* 0x010A, DAP_SGTL_SURROUND */ - 0x0000, /* 0x010C, DAP_FILTER_COEF_ACCESS */ - 0x0000, /* 0x010E, DAP_COEF_WR_B0_MSB */ - 0x0000, /* 0x0110, DAP_COEF_WR_B0_LSB */ - 0x0000, /* 0x0112, reserved */ - 0x0000, /* 0x0114, reserved */ - 0x002f, /* 0x0116, DAP_AUDIO_EQ_BASS_BAND0 */ - 0x002f, /* 0x0118, DAP_AUDIO_EQ_BAND0 */ - 0x002f, /* 0x011A, DAP_AUDIO_EQ_BAND2 */ - 0x002f, /* 0x011C, DAP_AUDIO_EQ_BAND3 */ - 0x002f, /* 0x011E, DAP_AUDIO_EQ_TREBLE_BAND4 */ - 0x8000, /* 0x0120, DAP_MAIN_CHAN */ - 0x0000, /* 0x0122, DAP_MIX_CHAN */ - 0x0510, /* 0x0124, DAP_AVC_CTRL */ - 0x1473, /* 0x0126, DAP_AVC_THRESHOLD */ - 0x0028, /* 0x0128, DAP_AVC_ATTACK */ - 0x0050, /* 0x012A, DAP_AVC_DECAY */ - 0x0000, /* 0x012C, DAP_COEF_WR_B1_MSB */ - 0x0000, /* 0x012E, DAP_COEF_WR_B1_LSB */ - 0x0000, /* 0x0130, DAP_COEF_WR_B2_MSB */ - 0x0000, /* 0x0132, DAP_COEF_WR_B2_LSB */ - 0x0000, /* 0x0134, DAP_COEF_WR_A1_MSB */ - 0x0000, /* 0x0136, DAP_COEF_WR_A1_LSB */ - 0x0000, /* 0x0138, DAP_COEF_WR_A2_MSB */ - 0x0000, /* 0x013A, DAP_COEF_WR_A2_LSB */ +/* default value of sgtl5000 registers */ +static const u16 sgtl5000_regs[SGTL5000_MAX_REG_OFFSET] = { + [SGTL5000_CHIP_CLK_CTRL] = 0x0008, + [SGTL5000_CHIP_I2S_CTRL] = 0x0010, + [SGTL5000_CHIP_SSS_CTRL] = 0x0008, + [SGTL5000_CHIP_DAC_VOL] = 0x3c3c, + [SGTL5000_CHIP_PAD_STRENGTH] = 0x015f, + [SGTL5000_CHIP_ANA_HP_CTRL] = 0x1818, + [SGTL5000_CHIP_ANA_CTRL] = 0x0111, + [SGTL5000_CHIP_LINE_OUT_VOL] = 0x0404, + [SGTL5000_CHIP_ANA_POWER] = 0x7060, + [SGTL5000_CHIP_PLL_CTRL] = 0x5000, + [SGTL5000_DAP_BASS_ENHANCE] = 0x0040, + [SGTL5000_DAP_BASS_ENHANCE_CTRL] = 0x051f, + [SGTL5000_DAP_SURROUND] = 0x0040, + [SGTL5000_DAP_EQ_BASS_BAND0] = 0x002f, + [SGTL5000_DAP_EQ_BASS_BAND1] = 0x002f, + [SGTL5000_DAP_EQ_BASS_BAND2] = 0x002f, + [SGTL5000_DAP_EQ_BASS_BAND3] = 0x002f, + [SGTL5000_DAP_EQ_BASS_BAND4] = 0x002f, + [SGTL5000_DAP_MAIN_CHAN] = 0x8000, + [SGTL5000_DAP_AVC_CTRL] = 0x0510, + [SGTL5000_DAP_AVC_THRESHOLD] = 0x1473, + [SGTL5000_DAP_AVC_ATTACK] = 0x0028, + [SGTL5000_DAP_AVC_DECAY] = 0x0050, }; /* regulator supplies for sgtl5000, VDDD is an optional external supply */ @@ -1023,12 +981,10 @@ static int sgtl5000_suspend(struct snd_soc_codec *codec, pm_message_t state) static int sgtl5000_restore_regs(struct snd_soc_codec *codec) { u16 *cache = codec->reg_cache; - int i; - int regular_regs = SGTL5000_CHIP_SHORT_CTRL >> 1; + u16 reg; /* restore regular registers */ - for (i = 0; i < regular_regs; i++) { - int reg = i << 1; + for (reg = 0; reg <= SGTL5000_CHIP_SHORT_CTRL; reg += 2) { /* this regs depends on the others */ if (reg == SGTL5000_CHIP_ANA_POWER || @@ -1038,35 +994,31 @@ static int sgtl5000_restore_regs(struct snd_soc_codec *codec) reg == SGTL5000_CHIP_CLK_CTRL) continue; - snd_soc_write(codec, reg, cache[i]); + snd_soc_write(codec, reg, cache[reg]); } /* restore dap registers */ - for (i = SGTL5000_DAP_REG_OFFSET >> 1; - i < SGTL5000_MAX_REG_OFFSET >> 1; i++) { - int reg = i << 1; - - snd_soc_write(codec, reg, cache[i]); - } + for (reg = SGTL5000_DAP_REG_OFFSET; reg < SGTL5000_MAX_REG_OFFSET; reg += 2) + snd_soc_write(codec, reg, cache[reg]); /* * restore power and other regs according * to set_power() and set_clock() */ snd_soc_write(codec, SGTL5000_CHIP_LINREG_CTRL, - cache[SGTL5000_CHIP_LINREG_CTRL >> 1]); + cache[SGTL5000_CHIP_LINREG_CTRL]); snd_soc_write(codec, SGTL5000_CHIP_ANA_POWER, - cache[SGTL5000_CHIP_ANA_POWER >> 1]); + cache[SGTL5000_CHIP_ANA_POWER]); snd_soc_write(codec, SGTL5000_CHIP_CLK_CTRL, - cache[SGTL5000_CHIP_CLK_CTRL >> 1]); + cache[SGTL5000_CHIP_CLK_CTRL]); snd_soc_write(codec, SGTL5000_CHIP_REF_CTRL, - cache[SGTL5000_CHIP_REF_CTRL >> 1]); + cache[SGTL5000_CHIP_REF_CTRL]); snd_soc_write(codec, SGTL5000_CHIP_LINE_OUT_CTRL, - cache[SGTL5000_CHIP_LINE_OUT_CTRL >> 1]); + cache[SGTL5000_CHIP_LINE_OUT_CTRL]); return 0; } @@ -1454,16 +1406,6 @@ static __devinit int sgtl5000_i2c_probe(struct i2c_client *client, if (!sgtl5000) return -ENOMEM; - /* - * copy DAP default values to default value array. - * sgtl5000 register space has a big hole, merge it - * at init phase makes life easy. - * FIXME: should we drop 'const' of sgtl5000_regs? - */ - memcpy((void *)(&sgtl5000_regs[0] + (SGTL5000_DAP_REG_OFFSET >> 1)), - sgtl5000_dap_regs, - SGTL5000_MAX_REG_OFFSET - SGTL5000_DAP_REG_OFFSET); - i2c_set_clientdata(client, sgtl5000); ret = snd_soc_register_codec(&client->dev, diff --git a/sound/soc/codecs/wm8915.c b/sound/soc/codecs/wm8915.c deleted file mode 100644 index 423baa9be24..00000000000 --- a/sound/soc/codecs/wm8915.c +++ /dev/null @@ -1,2995 +0,0 @@ -/* - * wm8915.c - WM8915 audio codec interface - * - * Copyright 2011 Wolfson Microelectronics PLC. - * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/init.h> -#include <linux/completion.h> -#include <linux/delay.h> -#include <linux/pm.h> -#include <linux/gcd.h> -#include <linux/gpio.h> -#include <linux/i2c.h> -#include <linux/regulator/consumer.h> -#include <linux/slab.h> -#include <linux/workqueue.h> -#include <sound/core.h> -#include <sound/jack.h> -#include <sound/pcm.h> -#include <sound/pcm_params.h> -#include <sound/soc.h> -#include <sound/initval.h> -#include <sound/tlv.h> -#include <trace/events/asoc.h> - -#include <sound/wm8915.h> -#include "wm8915.h" - -#define WM8915_AIFS 2 - -#define HPOUT1L 1 -#define HPOUT1R 2 -#define HPOUT2L 4 -#define HPOUT2R 8 - -#define WM8915_NUM_SUPPLIES 4 -static const char *wm8915_supply_names[WM8915_NUM_SUPPLIES] = { - "DBVDD", - "AVDD1", - "AVDD2", - "CPVDD", -}; - -struct wm8915_priv { - struct snd_soc_codec *codec; - - int ldo1ena; - - int sysclk; - int sysclk_src; - - int fll_src; - int fll_fref; - int fll_fout; - - struct completion fll_lock; - - u16 dcs_pending; - struct completion dcs_done; - - u16 hpout_ena; - u16 hpout_pending; - - struct regulator_bulk_data supplies[WM8915_NUM_SUPPLIES]; - struct notifier_block disable_nb[WM8915_NUM_SUPPLIES]; - - struct wm8915_pdata pdata; - - int rx_rate[WM8915_AIFS]; - int bclk_rate[WM8915_AIFS]; - - /* Platform dependant ReTune mobile configuration */ - int num_retune_mobile_texts; - const char **retune_mobile_texts; - int retune_mobile_cfg[2]; - struct soc_enum retune_mobile_enum; - - struct snd_soc_jack *jack; - bool detecting; - bool jack_mic; - wm8915_polarity_fn polarity_cb; - -#ifdef CONFIG_GPIOLIB - struct gpio_chip gpio_chip; -#endif -}; - -/* We can't use the same notifier block for more than one supply and - * there's no way I can see to get from a callback to the caller - * except container_of(). - */ -#define WM8915_REGULATOR_EVENT(n) \ -static int wm8915_regulator_event_##n(struct notifier_block *nb, \ - unsigned long event, void *data) \ -{ \ - struct wm8915_priv *wm8915 = container_of(nb, struct wm8915_priv, \ - disable_nb[n]); \ - if (event & REGULATOR_EVENT_DISABLE) { \ - wm8915->codec->cache_sync = 1; \ - } \ - return 0; \ -} - -WM8915_REGULATOR_EVENT(0) -WM8915_REGULATOR_EVENT(1) -WM8915_REGULATOR_EVENT(2) -WM8915_REGULATOR_EVENT(3) - -static const u16 wm8915_reg[WM8915_MAX_REGISTER] = { - [WM8915_SOFTWARE_RESET] = 0x8915, - [WM8915_POWER_MANAGEMENT_7] = 0x10, - [WM8915_DAC1_HPOUT1_VOLUME] = 0x88, - [WM8915_DAC2_HPOUT2_VOLUME] = 0x88, - [WM8915_DAC1_LEFT_VOLUME] = 0x2c0, - [WM8915_DAC1_RIGHT_VOLUME] = 0x2c0, - [WM8915_DAC2_LEFT_VOLUME] = 0x2c0, - [WM8915_DAC2_RIGHT_VOLUME] = 0x2c0, - [WM8915_OUTPUT1_LEFT_VOLUME] = 0x80, - [WM8915_OUTPUT1_RIGHT_VOLUME] = 0x80, - [WM8915_OUTPUT2_LEFT_VOLUME] = 0x80, - [WM8915_OUTPUT2_RIGHT_VOLUME] = 0x80, - [WM8915_MICBIAS_1] = 0x39, - [WM8915_MICBIAS_2] = 0x39, - [WM8915_LDO_1] = 0x3, - [WM8915_LDO_2] = 0x13, - [WM8915_ACCESSORY_DETECT_MODE_1] = 0x4, - [WM8915_HEADPHONE_DETECT_1] = 0x20, - [WM8915_MIC_DETECT_1] = 0x7600, - [WM8915_MIC_DETECT_2] = 0xbf, - [WM8915_CHARGE_PUMP_1] = 0x1f25, - [WM8915_CHARGE_PUMP_2] = 0xab19, - [WM8915_DC_SERVO_5] = 0x2a2a, - [WM8915_CONTROL_INTERFACE_1] = 0x8004, - [WM8915_CLOCKING_1] = 0x10, - [WM8915_AIF_RATE] = 0x83, - [WM8915_FLL_CONTROL_4] = 0x5dc0, - [WM8915_FLL_CONTROL_5] = 0xc84, - [WM8915_FLL_EFS_2] = 0x2, - [WM8915_AIF1_TX_LRCLK_1] = 0x80, - [WM8915_AIF1_TX_LRCLK_2] = 0x8, - [WM8915_AIF1_RX_LRCLK_1] = 0x80, - [WM8915_AIF1TX_DATA_CONFIGURATION_1] = 0x1818, - [WM8915_AIF1RX_DATA_CONFIGURATION] = 0x1818, - [WM8915_AIF1TX_TEST] = 0x7, - [WM8915_AIF2_TX_LRCLK_1] = 0x80, - [WM8915_AIF2_TX_LRCLK_2] = 0x8, - [WM8915_AIF2_RX_LRCLK_1] = 0x80, - [WM8915_AIF2TX_DATA_CONFIGURATION_1] = 0x1818, - [WM8915_AIF2RX_DATA_CONFIGURATION] = 0x1818, - [WM8915_AIF2TX_TEST] = 0x1, - [WM8915_DSP1_TX_LEFT_VOLUME] = 0xc0, - [WM8915_DSP1_TX_RIGHT_VOLUME] = 0xc0, - [WM8915_DSP1_RX_LEFT_VOLUME] = 0xc0, - [WM8915_DSP1_RX_RIGHT_VOLUME] = 0xc0, - [WM8915_DSP1_TX_FILTERS] = 0x2000, - [WM8915_DSP1_RX_FILTERS_1] = 0x200, - [WM8915_DSP1_RX_FILTERS_2] = 0x10, - [WM8915_DSP1_DRC_1] = 0x98, - [WM8915_DSP1_DRC_2] = 0x845, - [WM8915_DSP1_RX_EQ_GAINS_1] = 0x6318, - [WM8915_DSP1_RX_EQ_GAINS_2] = 0x6300, - [WM8915_DSP1_RX_EQ_BAND_1_A] = 0xfca, - [WM8915_DSP1_RX_EQ_BAND_1_B] = 0x400, - [WM8915_DSP1_RX_EQ_BAND_1_PG] = 0xd8, - [WM8915_DSP1_RX_EQ_BAND_2_A] = 0x1eb5, - [WM8915_DSP1_RX_EQ_BAND_2_B] = 0xf145, - [WM8915_DSP1_RX_EQ_BAND_2_C] = 0xb75, - [WM8915_DSP1_RX_EQ_BAND_2_PG] = 0x1c5, - [WM8915_DSP1_RX_EQ_BAND_3_A] = 0x1c58, - [WM8915_DSP1_RX_EQ_BAND_3_B] = 0xf373, - [WM8915_DSP1_RX_EQ_BAND_3_C] = 0xa54, - [WM8915_DSP1_RX_EQ_BAND_3_PG] = 0x558, - [WM8915_DSP1_RX_EQ_BAND_4_A] = 0x168e, - [WM8915_DSP1_RX_EQ_BAND_4_B] = 0xf829, - [WM8915_DSP1_RX_EQ_BAND_4_C] = 0x7ad, - [WM8915_DSP1_RX_EQ_BAND_4_PG] = 0x1103, - [WM8915_DSP1_RX_EQ_BAND_5_A] = 0x564, - [WM8915_DSP1_RX_EQ_BAND_5_B] = 0x559, - [WM8915_DSP1_RX_EQ_BAND_5_PG] = 0x4000, - [WM8915_DSP2_TX_LEFT_VOLUME] = 0xc0, - [WM8915_DSP2_TX_RIGHT_VOLUME] = 0xc0, - [WM8915_DSP2_RX_LEFT_VOLUME] = 0xc0, - [WM8915_DSP2_RX_RIGHT_VOLUME] = 0xc0, - [WM8915_DSP2_TX_FILTERS] = 0x2000, - [WM8915_DSP2_RX_FILTERS_1] = 0x200, - [WM8915_DSP2_RX_FILTERS_2] = 0x10, - [WM8915_DSP2_DRC_1] = 0x98, - [WM8915_DSP2_DRC_2] = 0x845, - [WM8915_DSP2_RX_EQ_GAINS_1] = 0x6318, - [WM8915_DSP2_RX_EQ_GAINS_2] = 0x6300, - [WM8915_DSP2_RX_EQ_BAND_1_A] = 0xfca, - [WM8915_DSP2_RX_EQ_BAND_1_B] = 0x400, - [WM8915_DSP2_RX_EQ_BAND_1_PG] = 0xd8, - [WM8915_DSP2_RX_EQ_BAND_2_A] = 0x1eb5, - [WM8915_DSP2_RX_EQ_BAND_2_B] = 0xf145, - [WM8915_DSP2_RX_EQ_BAND_2_C] = 0xb75, - [WM8915_DSP2_RX_EQ_BAND_2_PG] = 0x1c5, - [WM8915_DSP2_RX_EQ_BAND_3_A] = 0x1c58, - [WM8915_DSP2_RX_EQ_BAND_3_B] = 0xf373, - [WM8915_DSP2_RX_EQ_BAND_3_C] = 0xa54, - [WM8915_DSP2_RX_EQ_BAND_3_PG] = 0x558, - [WM8915_DSP2_RX_EQ_BAND_4_A] = 0x168e, - [WM8915_DSP2_RX_EQ_BAND_4_B] = 0xf829, - [WM8915_DSP2_RX_EQ_BAND_4_C] = 0x7ad, - [WM8915_DSP2_RX_EQ_BAND_4_PG] = 0x1103, - [WM8915_DSP2_RX_EQ_BAND_5_A] = 0x564, - [WM8915_DSP2_RX_EQ_BAND_5_B] = 0x559, - [WM8915_DSP2_RX_EQ_BAND_5_PG] = 0x4000, - [WM8915_OVERSAMPLING] = 0xd, - [WM8915_SIDETONE] = 0x1040, - [WM8915_GPIO_1] = 0xa101, - [WM8915_GPIO_2] = 0xa101, - [WM8915_GPIO_3] = 0xa101, - [WM8915_GPIO_4] = 0xa101, - [WM8915_GPIO_5] = 0xa101, - [WM8915_PULL_CONTROL_2] = 0x140, - [WM8915_INTERRUPT_STATUS_1_MASK] = 0x1f, - [WM8915_INTERRUPT_STATUS_2_MASK] = 0x1ecf, - [WM8915_RIGHT_PDM_SPEAKER] = 0x1, - [WM8915_PDM_SPEAKER_MUTE_SEQUENCE] = 0x69, - [WM8915_PDM_SPEAKER_VOLUME] = 0x66, - [WM8915_WRITE_SEQUENCER_0] = 0x1, - [WM8915_WRITE_SEQUENCER_1] = 0x1, - [WM8915_WRITE_SEQUENCER_3] = 0x6, - [WM8915_WRITE_SEQUENCER_4] = 0x40, - [WM8915_WRITE_SEQUENCER_5] = 0x1, - [WM8915_WRITE_SEQUENCER_6] = 0xf, - [WM8915_WRITE_SEQUENCER_7] = 0x6, - [WM8915_WRITE_SEQUENCER_8] = 0x1, - [WM8915_WRITE_SEQUENCER_9] = 0x3, - [WM8915_WRITE_SEQUENCER_10] = 0x104, - [WM8915_WRITE_SEQUENCER_12] = 0x60, - [WM8915_WRITE_SEQUENCER_13] = 0x11, - [WM8915_WRITE_SEQUENCER_14] = 0x401, - [WM8915_WRITE_SEQUENCER_16] = 0x50, - [WM8915_WRITE_SEQUENCER_17] = 0x3, - [WM8915_WRITE_SEQUENCER_18] = 0x100, - [WM8915_WRITE_SEQUENCER_20] = 0x51, - [WM8915_WRITE_SEQUENCER_21] = 0x3, - [WM8915_WRITE_SEQUENCER_22] = 0x104, - [WM8915_WRITE_SEQUENCER_23] = 0xa, - [WM8915_WRITE_SEQUENCER_24] = 0x60, - [WM8915_WRITE_SEQUENCER_25] = 0x3b, - [WM8915_WRITE_SEQUENCER_26] = 0x502, - [WM8915_WRITE_SEQUENCER_27] = 0x100, - [WM8915_WRITE_SEQUENCER_28] = 0x2fff, - [WM8915_WRITE_SEQUENCER_32] = 0x2fff, - [WM8915_WRITE_SEQUENCER_36] = 0x2fff, - [WM8915_WRITE_SEQUENCER_40] = 0x2fff, - [WM8915_WRITE_SEQUENCER_44] = 0x2fff, - [WM8915_WRITE_SEQUENCER_48] = 0x2fff, - [WM8915_WRITE_SEQUENCER_52] = 0x2fff, - [WM8915_WRITE_SEQUENCER_56] = 0x2fff, - [WM8915_WRITE_SEQUENCER_60] = 0x2fff, - [WM8915_WRITE_SEQUENCER_64] = 0x1, - [WM8915_WRITE_SEQUENCER_65] = 0x1, - [WM8915_WRITE_SEQUENCER_67] = 0x6, - [WM8915_WRITE_SEQUENCER_68] = 0x40, - [WM8915_WRITE_SEQUENCER_69] = 0x1, - [WM8915_WRITE_SEQUENCER_70] = 0xf, - [WM8915_WRITE_SEQUENCER_71] = 0x6, - [WM8915_WRITE_SEQUENCER_72] = 0x1, - [WM8915_WRITE_SEQUENCER_73] = 0x3, - [WM8915_WRITE_SEQUENCER_74] = 0x104, - [WM8915_WRITE_SEQUENCER_76] = 0x60, - [WM8915_WRITE_SEQUENCER_77] = 0x11, - [WM8915_WRITE_SEQUENCER_78] = 0x401, - [WM8915_WRITE_SEQUENCER_80] = 0x50, - [WM8915_WRITE_SEQUENCER_81] = 0x3, - [WM8915_WRITE_SEQUENCER_82] = 0x100, - [WM8915_WRITE_SEQUENCER_84] = 0x60, - [WM8915_WRITE_SEQUENCER_85] = 0x3b, - [WM8915_WRITE_SEQUENCER_86] = 0x502, - [WM8915_WRITE_SEQUENCER_87] = 0x100, - [WM8915_WRITE_SEQUENCER_88] = 0x2fff, - [WM8915_WRITE_SEQUENCER_92] = 0x2fff, - [WM8915_WRITE_SEQUENCER_96] = 0x2fff, - [WM8915_WRITE_SEQUENCER_100] = 0x2fff, - [WM8915_WRITE_SEQUENCER_104] = 0x2fff, - [WM8915_WRITE_SEQUENCER_108] = 0x2fff, - [WM8915_WRITE_SEQUENCER_112] = 0x2fff, - [WM8915_WRITE_SEQUENCER_116] = 0x2fff, - [WM8915_WRITE_SEQUENCER_120] = 0x2fff, - [WM8915_WRITE_SEQUENCER_124] = 0x2fff, - [WM8915_WRITE_SEQUENCER_128] = 0x1, - [WM8915_WRITE_SEQUENCER_129] = 0x1, - [WM8915_WRITE_SEQUENCER_131] = 0x6, - [WM8915_WRITE_SEQUENCER_132] = 0x40, - [WM8915_WRITE_SEQUENCER_133] = 0x1, - [WM8915_WRITE_SEQUENCER_134] = 0xf, - [WM8915_WRITE_SEQUENCER_135] = 0x6, - [WM8915_WRITE_SEQUENCER_136] = 0x1, - [WM8915_WRITE_SEQUENCER_137] = 0x3, - [WM8915_WRITE_SEQUENCER_138] = 0x106, - [WM8915_WRITE_SEQUENCER_140] = 0x61, - [WM8915_WRITE_SEQUENCER_141] = 0x11, - [WM8915_WRITE_SEQUENCER_142] = 0x401, - [WM8915_WRITE_SEQUENCER_144] = 0x50, - [WM8915_WRITE_SEQUENCER_145] = 0x3, - [WM8915_WRITE_SEQUENCER_146] = 0x102, - [WM8915_WRITE_SEQUENCER_148] = 0x51, - [WM8915_WRITE_SEQUENCER_149] = 0x3, - [WM8915_WRITE_SEQUENCER_150] = 0x106, - [WM8915_WRITE_SEQUENCER_151] = 0xa, - [WM8915_WRITE_SEQUENCER_152] = 0x61, - [WM8915_WRITE_SEQUENCER_153] = 0x3b, - [WM8915_WRITE_SEQUENCER_154] = 0x502, - [WM8915_WRITE_SEQUENCER_155] = 0x100, - [WM8915_WRITE_SEQUENCER_156] = 0x2fff, - [WM8915_WRITE_SEQUENCER_160] = 0x2fff, - [WM8915_WRITE_SEQUENCER_164] = 0x2fff, - [WM8915_WRITE_SEQUENCER_168] = 0x2fff, - [WM8915_WRITE_SEQUENCER_172] = 0x2fff, - [WM8915_WRITE_SEQUENCER_176] = 0x2fff, - [WM8915_WRITE_SEQUENCER_180] = 0x2fff, - [WM8915_WRITE_SEQUENCER_184] = 0x2fff, - [WM8915_WRITE_SEQUENCER_188] = 0x2fff, - [WM8915_WRITE_SEQUENCER_192] = 0x1, - [WM8915_WRITE_SEQUENCER_193] = 0x1, - [WM8915_WRITE_SEQUENCER_195] = 0x6, - [WM8915_WRITE_SEQUENCER_196] = 0x40, - [WM8915_WRITE_SEQUENCER_197] = 0x1, - [WM8915_WRITE_SEQUENCER_198] = 0xf, - [WM8915_WRITE_SEQUENCER_199] = 0x6, - [WM8915_WRITE_SEQUENCER_200] = 0x1, - [WM8915_WRITE_SEQUENCER_201] = 0x3, - [WM8915_WRITE_SEQUENCER_202] = 0x106, - [WM8915_WRITE_SEQUENCER_204] = 0x61, - [WM8915_WRITE_SEQUENCER_205] = 0x11, - [WM8915_WRITE_SEQUENCER_206] = 0x401, - [WM8915_WRITE_SEQUENCER_208] = 0x50, - [WM8915_WRITE_SEQUENCER_209] = 0x3, - [WM8915_WRITE_SEQUENCER_210] = 0x102, - [WM8915_WRITE_SEQUENCER_212] = 0x61, - [WM8915_WRITE_SEQUENCER_213] = 0x3b, - [WM8915_WRITE_SEQUENCER_214] = 0x502, - [WM8915_WRITE_SEQUENCER_215] = 0x100, - [WM8915_WRITE_SEQUENCER_216] = 0x2fff, - [WM8915_WRITE_SEQUENCER_220] = 0x2fff, - [WM8915_WRITE_SEQUENCER_224] = 0x2fff, - [WM8915_WRITE_SEQUENCER_228] = 0x2fff, - [WM8915_WRITE_SEQUENCER_232] = 0x2fff, - [WM8915_WRITE_SEQUENCER_236] = 0x2fff, - [WM8915_WRITE_SEQUENCER_240] = 0x2fff, - [WM8915_WRITE_SEQUENCER_244] = 0x2fff, - [WM8915_WRITE_SEQUENCER_248] = 0x2fff, - [WM8915_WRITE_SEQUENCER_252] = 0x2fff, - [WM8915_WRITE_SEQUENCER_256] = 0x60, - [WM8915_WRITE_SEQUENCER_258] = 0x601, - [WM8915_WRITE_SEQUENCER_260] = 0x50, - [WM8915_WRITE_SEQUENCER_262] = 0x100, - [WM8915_WRITE_SEQUENCER_264] = 0x1, - [WM8915_WRITE_SEQUENCER_266] = 0x104, - [WM8915_WRITE_SEQUENCER_267] = 0x100, - [WM8915_WRITE_SEQUENCER_268] = 0x2fff, - [WM8915_WRITE_SEQUENCER_272] = 0x2fff, - [WM8915_WRITE_SEQUENCER_276] = 0x2fff, - [WM8915_WRITE_SEQUENCER_280] = 0x2fff, - [WM8915_WRITE_SEQUENCER_284] = 0x2fff, - [WM8915_WRITE_SEQUENCER_288] = 0x2fff, - [WM8915_WRITE_SEQUENCER_292] = 0x2fff, - [WM8915_WRITE_SEQUENCER_296] = 0x2fff, - [WM8915_WRITE_SEQUENCER_300] = 0x2fff, - [WM8915_WRITE_SEQUENCER_304] = 0x2fff, - [WM8915_WRITE_SEQUENCER_308] = 0x2fff, - [WM8915_WRITE_SEQUENCER_312] = 0x2fff, - [WM8915_WRITE_SEQUENCER_316] = 0x2fff, - [WM8915_WRITE_SEQUENCER_320] = 0x61, - [WM8915_WRITE_SEQUENCER_322] = 0x601, - [WM8915_WRITE_SEQUENCER_324] = 0x50, - [WM8915_WRITE_SEQUENCER_326] = 0x102, - [WM8915_WRITE_SEQUENCER_328] = 0x1, - [WM8915_WRITE_SEQUENCER_330] = 0x106, - [WM8915_WRITE_SEQUENCER_331] = 0x100, - [WM8915_WRITE_SEQUENCER_332] = 0x2fff, - [WM8915_WRITE_SEQUENCER_336] = 0x2fff, - [WM8915_WRITE_SEQUENCER_340] = 0x2fff, - [WM8915_WRITE_SEQUENCER_344] = 0x2fff, - [WM8915_WRITE_SEQUENCER_348] = 0x2fff, - [WM8915_WRITE_SEQUENCER_352] = 0x2fff, - [WM8915_WRITE_SEQUENCER_356] = 0x2fff, - [WM8915_WRITE_SEQUENCER_360] = 0x2fff, - [WM8915_WRITE_SEQUENCER_364] = 0x2fff, - [WM8915_WRITE_SEQUENCER_368] = 0x2fff, - [WM8915_WRITE_SEQUENCER_372] = 0x2fff, - [WM8915_WRITE_SEQUENCER_376] = 0x2fff, - [WM8915_WRITE_SEQUENCER_380] = 0x2fff, - [WM8915_WRITE_SEQUENCER_384] = 0x60, - [WM8915_WRITE_SEQUENCER_386] = 0x601, - [WM8915_WRITE_SEQUENCER_388] = 0x61, - [WM8915_WRITE_SEQUENCER_390] = 0x601, - [WM8915_WRITE_SEQUENCER_392] = 0x50, - [WM8915_WRITE_SEQUENCER_394] = 0x300, - [WM8915_WRITE_SEQUENCER_396] = 0x1, - [WM8915_WRITE_SEQUENCER_398] = 0x304, - [WM8915_WRITE_SEQUENCER_400] = 0x40, - [WM8915_WRITE_SEQUENCER_402] = 0xf, - [WM8915_WRITE_SEQUENCER_404] = 0x1, - [WM8915_WRITE_SEQUENCER_407] = 0x100, -}; - -static const DECLARE_TLV_DB_SCALE(inpga_tlv, 0, 100, 0); -static const DECLARE_TLV_DB_SCALE(sidetone_tlv, -3600, 150, 0); -static const DECLARE_TLV_DB_SCALE(digital_tlv, -7200, 75, 1); -static const DECLARE_TLV_DB_SCALE(out_digital_tlv, -1200, 150, 0); -static const DECLARE_TLV_DB_SCALE(out_tlv, -900, 75, 0); -static const DECLARE_TLV_DB_SCALE(spk_tlv, -900, 150, 0); -static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0); - -static const char *sidetone_hpf_text[] = { - "2.9kHz", "1.5kHz", "735Hz", "403Hz", "196Hz", "98Hz", "49Hz" -}; - -static const struct soc_enum sidetone_hpf = - SOC_ENUM_SINGLE(WM8915_SIDETONE, 7, 6, sidetone_hpf_text); - -static const char *hpf_mode_text[] = { - "HiFi", "Custom", "Voice" -}; - -static const struct soc_enum dsp1tx_hpf_mode = - SOC_ENUM_SINGLE(WM8915_DSP1_TX_FILTERS, 3, 3, hpf_mode_text); - -static const struct soc_enum dsp2tx_hpf_mode = - SOC_ENUM_SINGLE(WM8915_DSP2_TX_FILTERS, 3, 3, hpf_mode_text); - -static const char *hpf_cutoff_text[] = { - "50Hz", "75Hz", "100Hz", "150Hz", "200Hz", "300Hz", "400Hz" -}; - -static const struct soc_enum dsp1tx_hpf_cutoff = - SOC_ENUM_SINGLE(WM8915_DSP1_TX_FILTERS, 0, 7, hpf_cutoff_text); - -static const struct soc_enum dsp2tx_hpf_cutoff = - SOC_ENUM_SINGLE(WM8915_DSP2_TX_FILTERS, 0, 7, hpf_cutoff_text); - -static void wm8915_set_retune_mobile(struct snd_soc_codec *codec, int block) -{ - struct wm8915_priv *wm8915 = snd_soc_codec_get_drvdata(codec); - struct wm8915_pdata *pdata = &wm8915->pdata; - int base, best, best_val, save, i, cfg, iface; - - if (!wm8915->num_retune_mobile_texts) - return; - - switch (block) { - case 0: - base = WM8915_DSP1_RX_EQ_GAINS_1; - if (snd_soc_read(codec, WM8915_POWER_MANAGEMENT_8) & - WM8915_DSP1RX_SRC) - iface = 1; - else - iface = 0; - break; - case 1: - base = WM8915_DSP1_RX_EQ_GAINS_2; - if (snd_soc_read(codec, WM8915_POWER_MANAGEMENT_8) & - WM8915_DSP2RX_SRC) - iface = 1; - else - iface = 0; - break; - default: - return; - } - - /* Find the version of the currently selected configuration - * with the nearest sample rate. */ - cfg = wm8915->retune_mobile_cfg[block]; - best = 0; - best_val = INT_MAX; - for (i = 0; i < pdata->num_retune_mobile_cfgs; i++) { - if (strcmp(pdata->retune_mobile_cfgs[i].name, - wm8915->retune_mobile_texts[cfg]) == 0 && - abs(pdata->retune_mobile_cfgs[i].rate - - wm8915->rx_rate[iface]) < best_val) { - best = i; - best_val = abs(pdata->retune_mobile_cfgs[i].rate - - wm8915->rx_rate[iface]); - } - } - - dev_dbg(codec->dev, "ReTune Mobile %d %s/%dHz for %dHz sample rate\n", - block, - pdata->retune_mobile_cfgs[best].name, - pdata->retune_mobile_cfgs[best].rate, - wm8915->rx_rate[iface]); - - /* The EQ will be disabled while reconfiguring it, remember the - * current configuration. - */ - save = snd_soc_read(codec, base); - save &= WM8915_DSP1RX_EQ_ENA; - - for (i = 0; i < ARRAY_SIZE(pdata->retune_mobile_cfgs[best].regs); i++) - snd_soc_update_bits(codec, base + i, 0xffff, - pdata->retune_mobile_cfgs[best].regs[i]); - - snd_soc_update_bits(codec, base, WM8915_DSP1RX_EQ_ENA, save); -} - -/* Icky as hell but saves code duplication */ -static int wm8915_get_retune_mobile_block(const char *name) -{ - if (strcmp(name, "DSP1 EQ Mode") == 0) - return 0; - if (strcmp(name, "DSP2 EQ Mode") == 0) - return 1; - return -EINVAL; -} - -static int wm8915_put_retune_mobile_enum(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); - struct wm8915_priv *wm8915 = snd_soc_codec_get_drvdata(codec); - struct wm8915_pdata *pdata = &wm8915->pdata; - int block = wm8915_get_retune_mobile_block(kcontrol->id.name); - int value = ucontrol->value.integer.value[0]; - - if (block < 0) - return block; - - if (value >= pdata->num_retune_mobile_cfgs) - return -EINVAL; - - wm8915->retune_mobile_cfg[block] = value; - - wm8915_set_retune_mobile(codec, block); - - return 0; -} - -static int wm8915_get_retune_mobile_enum(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); - struct wm8915_priv *wm8915 = snd_soc_codec_get_drvdata(codec); - int block = wm8915_get_retune_mobile_block(kcontrol->id.name); - - ucontrol->value.enumerated.item[0] = wm8915->retune_mobile_cfg[block]; - - return 0; -} - -static const struct snd_kcontrol_new wm8915_snd_controls[] = { -SOC_DOUBLE_R_TLV("Capture Volume", WM8915_LEFT_LINE_INPUT_VOLUME, - WM8915_RIGHT_LINE_INPUT_VOLUME, 0, 31, 0, inpga_tlv), -SOC_DOUBLE_R("Capture ZC Switch", WM8915_LEFT_LINE_INPUT_VOLUME, - WM8915_RIGHT_LINE_INPUT_VOLUME, 5, 1, 0), - -SOC_DOUBLE_TLV("DAC1 Sidetone Volume", WM8915_DAC1_MIXER_VOLUMES, - 0, 5, 24, 0, sidetone_tlv), -SOC_DOUBLE_TLV("DAC2 Sidetone Volume", WM8915_DAC2_MIXER_VOLUMES, - 0, 5, 24, 0, sidetone_tlv), -SOC_SINGLE("Sidetone LPF Switch", WM8915_SIDETONE, 12, 1, 0), -SOC_ENUM("Sidetone HPF Cut-off", sidetone_hpf), -SOC_SINGLE("Sidetone HPF Switch", WM8915_SIDETONE, 6, 1, 0), - -SOC_DOUBLE_R_TLV("DSP1 Capture Volume", WM8915_DSP1_TX_LEFT_VOLUME, - WM8915_DSP1_TX_RIGHT_VOLUME, 1, 96, 0, digital_tlv), -SOC_DOUBLE_R_TLV("DSP2 Capture Volume", WM8915_DSP2_TX_LEFT_VOLUME, - WM8915_DSP2_TX_RIGHT_VOLUME, 1, 96, 0, digital_tlv), - -SOC_SINGLE("DSP1 Capture Notch Filter Switch", WM8915_DSP1_TX_FILTERS, - 13, 1, 0), -SOC_DOUBLE("DSP1 Capture HPF Switch", WM8915_DSP1_TX_FILTERS, 12, 11, 1, 0), -SOC_ENUM("DSP1 Capture HPF Mode", dsp1tx_hpf_mode), -SOC_ENUM("DSP1 Capture HPF Cutoff", dsp1tx_hpf_cutoff), - -SOC_SINGLE("DSP2 Capture Notch Filter Switch", WM8915_DSP2_TX_FILTERS, - 13, 1, 0), -SOC_DOUBLE("DSP2 Capture HPF Switch", WM8915_DSP2_TX_FILTERS, 12, 11, 1, 0), -SOC_ENUM("DSP2 Capture HPF Mode", dsp2tx_hpf_mode), -SOC_ENUM("DSP2 Capture HPF Cutoff", dsp2tx_hpf_cutoff), - -SOC_DOUBLE_R_TLV("DSP1 Playback Volume", WM8915_DSP1_RX_LEFT_VOLUME, - WM8915_DSP1_RX_RIGHT_VOLUME, 1, 112, 0, digital_tlv), -SOC_SINGLE("DSP1 Playback Switch", WM8915_DSP1_RX_FILTERS_1, 9, 1, 1), - -SOC_DOUBLE_R_TLV("DSP2 Playback Volume", WM8915_DSP2_RX_LEFT_VOLUME, - WM8915_DSP2_RX_RIGHT_VOLUME, 1, 112, 0, digital_tlv), -SOC_SINGLE("DSP2 Playback Switch", WM8915_DSP2_RX_FILTERS_1, 9, 1, 1), - -SOC_DOUBLE_R_TLV("DAC1 Volume", WM8915_DAC1_LEFT_VOLUME, - WM8915_DAC1_RIGHT_VOLUME, 1, 112, 0, digital_tlv), -SOC_DOUBLE_R("DAC1 Switch", WM8915_DAC1_LEFT_VOLUME, - WM8915_DAC1_RIGHT_VOLUME, 9, 1, 1), - -SOC_DOUBLE_R_TLV("DAC2 Volume", WM8915_DAC2_LEFT_VOLUME, - WM8915_DAC2_RIGHT_VOLUME, 1, 112, 0, digital_tlv), -SOC_DOUBLE_R("DAC2 Switch", WM8915_DAC2_LEFT_VOLUME, - WM8915_DAC2_RIGHT_VOLUME, 9, 1, 1), - -SOC_SINGLE("Speaker High Performance Switch", WM8915_OVERSAMPLING, 3, 1, 0), -SOC_SINGLE("DMIC High Performance Switch", WM8915_OVERSAMPLING, 2, 1, 0), -SOC_SINGLE("ADC High Performance Switch", WM8915_OVERSAMPLING, 1, 1, 0), -SOC_SINGLE("DAC High Performance Switch", WM8915_OVERSAMPLING, 0, 1, 0), - -SOC_SINGLE("DAC Soft Mute Switch", WM8915_DAC_SOFTMUTE, 1, 1, 0), -SOC_SINGLE("DAC Slow Soft Mute Switch", WM8915_DAC_SOFTMUTE, 0, 1, 0), - -SOC_DOUBLE_TLV("Digital Output 1 Volume", WM8915_DAC1_HPOUT1_VOLUME, 0, 4, - 8, 0, out_digital_tlv), -SOC_DOUBLE_TLV("Digital Output 2 Volume", WM8915_DAC2_HPOUT2_VOLUME, 0, 4, - 8, 0, out_digital_tlv), - -SOC_DOUBLE_R_TLV("Output 1 Volume", WM8915_OUTPUT1_LEFT_VOLUME, - WM8915_OUTPUT1_RIGHT_VOLUME, 0, 12, 0, out_tlv), -SOC_DOUBLE_R("Output 1 ZC Switch", WM8915_OUTPUT1_LEFT_VOLUME, - WM8915_OUTPUT1_RIGHT_VOLUME, 7, 1, 0), - -SOC_DOUBLE_R_TLV("Output 2 Volume", WM8915_OUTPUT2_LEFT_VOLUME, - WM8915_OUTPUT2_RIGHT_VOLUME, 0, 12, 0, out_tlv), -SOC_DOUBLE_R("Output 2 ZC Switch", WM8915_OUTPUT2_LEFT_VOLUME, - WM8915_OUTPUT2_RIGHT_VOLUME, 7, 1, 0), - -SOC_DOUBLE_TLV("Speaker Volume", WM8915_PDM_SPEAKER_VOLUME, 0, 4, 8, 0, - spk_tlv), -SOC_DOUBLE_R("Speaker Switch", WM8915_LEFT_PDM_SPEAKER, - WM8915_RIGHT_PDM_SPEAKER, 3, 1, 1), -SOC_DOUBLE_R("Speaker ZC Switch", WM8915_LEFT_PDM_SPEAKER, - WM8915_RIGHT_PDM_SPEAKER, 2, 1, 0), - -SOC_SINGLE("DSP1 EQ Switch", WM8915_DSP1_RX_EQ_GAINS_1, 0, 1, 0), -SOC_SINGLE("DSP2 EQ Switch", WM8915_DSP2_RX_EQ_GAINS_1, 0, 1, 0), -}; - -static const struct snd_kcontrol_new wm8915_eq_controls[] = { -SOC_SINGLE_TLV("DSP1 EQ B1 Volume", WM8915_DSP1_RX_EQ_GAINS_1, 11, 31, 0, - eq_tlv), -SOC_SINGLE_TLV("DSP1 EQ B2 Volume", WM8915_DSP1_RX_EQ_GAINS_1, 6, 31, 0, - eq_tlv), -SOC_SINGLE_TLV("DSP1 EQ B3 Volume", WM8915_DSP1_RX_EQ_GAINS_1, 1, 31, 0, - eq_tlv), -SOC_SINGLE_TLV("DSP1 EQ B4 Volume", WM8915_DSP1_RX_EQ_GAINS_2, 11, 31, 0, - eq_tlv), -SOC_SINGLE_TLV("DSP1 EQ B5 Volume", WM8915_DSP1_RX_EQ_GAINS_2, 6, 31, 0, - eq_tlv), - -SOC_SINGLE_TLV("DSP2 EQ B1 Volume", WM8915_DSP2_RX_EQ_GAINS_1, 11, 31, 0, - eq_tlv), -SOC_SINGLE_TLV("DSP2 EQ B2 Volume", WM8915_DSP2_RX_EQ_GAINS_1, 6, 31, 0, - eq_tlv), -SOC_SINGLE_TLV("DSP2 EQ B3 Volume", WM8915_DSP2_RX_EQ_GAINS_1, 1, 31, 0, - eq_tlv), -SOC_SINGLE_TLV("DSP2 EQ B4 Volume", WM8915_DSP2_RX_EQ_GAINS_2, 11, 31, 0, - eq_tlv), -SOC_SINGLE_TLV("DSP2 EQ B5 Volume", WM8915_DSP2_RX_EQ_GAINS_2, 6, 31, 0, - eq_tlv), -}; - -static int cp_event(struct snd_soc_dapm_widget *w, - struct snd_kcontrol *kcontrol, int event) -{ - switch (event) { - case SND_SOC_DAPM_POST_PMU: - msleep(5); - break; - default: - BUG(); - return -EINVAL; - } - - return 0; -} - -static int rmv_short_event(struct snd_soc_dapm_widget *w, - struct snd_kcontrol *kcontrol, int event) -{ - struct wm8915_priv *wm8915 = snd_soc_codec_get_drvdata(w->codec); - - /* Record which outputs we enabled */ - switch (event) { - case SND_SOC_DAPM_PRE_PMD: - wm8915->hpout_pending &= ~w->shift; - break; - case SND_SOC_DAPM_PRE_PMU: - wm8915->hpout_pending |= w->shift; - break; - default: - BUG(); - return -EINVAL; - } - - return 0; -} - -static void wait_for_dc_servo(struct snd_soc_codec *codec, u16 mask) -{ - struct i2c_client *i2c = to_i2c_client(codec->dev); - struct wm8915_priv *wm8915 = snd_soc_codec_get_drvdata(codec); - int i, ret; - unsigned long timeout = 200; - - snd_soc_write(codec, WM8915_DC_SERVO_2, mask); - - /* Use the interrupt if possible */ - do { - if (i2c->irq) { - timeout = wait_for_completion_timeout(&wm8915->dcs_done, - msecs_to_jiffies(200)); - if (timeout == 0) - dev_err(codec->dev, "DC servo timed out\n"); - - } else { - msleep(1); - if (--i) { - timeout = 0; - break; - } - } - - ret = snd_soc_read(codec, WM8915_DC_SERVO_2); - dev_dbg(codec->dev, "DC servo state: %x\n", ret); - } while (ret & mask); - - if (timeout == 0) - dev_err(codec->dev, "DC servo timed out for %x\n", mask); - else - dev_dbg(codec->dev, "DC servo complete for %x\n", mask); -} - -static void wm8915_seq_notifier(struct snd_soc_dapm_context *dapm, - enum snd_soc_dapm_type event, int subseq) -{ - struct snd_soc_codec *codec = container_of(dapm, - struct snd_soc_codec, dapm); - struct wm8915_priv *wm8915 = snd_soc_codec_get_drvdata(codec); - u16 val, mask; - - /* Complete any pending DC servo starts */ - if (wm8915->dcs_pending) { - dev_dbg(codec->dev, "Starting DC servo for %x\n", - wm8915->dcs_pending); - - /* Trigger a startup sequence */ - wait_for_dc_servo(codec, wm8915->dcs_pending - << WM8915_DCS_TRIG_STARTUP_0_SHIFT); - - wm8915->dcs_pending = 0; - } - - if (wm8915->hpout_pending != wm8915->hpout_ena) { - dev_dbg(codec->dev, "Applying RMV_SHORTs %x->%x\n", - wm8915->hpout_ena, wm8915->hpout_pending); - - val = 0; - mask = 0; - if (wm8915->hpout_pending & HPOUT1L) { - val |= WM8915_HPOUT1L_RMV_SHORT; - mask |= WM8915_HPOUT1L_RMV_SHORT; - } else { - mask |= WM8915_HPOUT1L_RMV_SHORT | - WM8915_HPOUT1L_OUTP | - WM8915_HPOUT1L_DLY; - } - - if (wm8915->hpout_pending & HPOUT1R) { - val |= WM8915_HPOUT1R_RMV_SHORT; - mask |= WM8915_HPOUT1R_RMV_SHORT; - } else { - mask |= WM8915_HPOUT1R_RMV_SHORT | - WM8915_HPOUT1R_OUTP | - WM8915_HPOUT1R_DLY; - } - - snd_soc_update_bits(codec, WM8915_ANALOGUE_HP_1, mask, val); - - val = 0; - mask = 0; - if (wm8915->hpout_pending & HPOUT2L) { - val |= WM8915_HPOUT2L_RMV_SHORT; - mask |= WM8915_HPOUT2L_RMV_SHORT; - } else { - mask |= WM8915_HPOUT2L_RMV_SHORT | - WM8915_HPOUT2L_OUTP | - WM8915_HPOUT2L_DLY; - } - - if (wm8915->hpout_pending & HPOUT2R) { - val |= WM8915_HPOUT2R_RMV_SHORT; - mask |= WM8915_HPOUT2R_RMV_SHORT; - } else { - mask |= WM8915_HPOUT2R_RMV_SHORT | - WM8915_HPOUT2R_OUTP | - WM8915_HPOUT2R_DLY; - } - - snd_soc_update_bits(codec, WM8915_ANALOGUE_HP_2, mask, val); - - wm8915->hpout_ena = wm8915->hpout_pending; - } -} - -static int dcs_start(struct snd_soc_dapm_widget *w, - struct snd_kcontrol *kcontrol, int event) -{ - struct wm8915_priv *wm8915 = snd_soc_codec_get_drvdata(w->codec); - - switch (event) { - case SND_SOC_DAPM_POST_PMU: - wm8915->dcs_pending |= 1 << w->shift; - break; - default: - BUG(); - return -EINVAL; - } - - return 0; -} - -static const char *sidetone_text[] = { - "IN1", "IN2", -}; - -static const struct soc_enum left_sidetone_enum = - SOC_ENUM_SINGLE(WM8915_SIDETONE, 0, 2, sidetone_text); - -static const struct snd_kcontrol_new left_sidetone = - SOC_DAPM_ENUM("Left Sidetone", left_sidetone_enum); - -static const struct soc_enum right_sidetone_enum = - SOC_ENUM_SINGLE(WM8915_SIDETONE, 1, 2, sidetone_text); - -static const struct snd_kcontrol_new right_sidetone = - SOC_DAPM_ENUM("Right Sidetone", right_sidetone_enum); - -static const char *spk_text[] = { - "DAC1L", "DAC1R", "DAC2L", "DAC2R" -}; - -static const struct soc_enum spkl_enum = - SOC_ENUM_SINGLE(WM8915_LEFT_PDM_SPEAKER, 0, 4, spk_text); - -static const struct snd_kcontrol_new spkl_mux = - SOC_DAPM_ENUM("SPKL", spkl_enum); - -static const struct soc_enum spkr_enum = - SOC_ENUM_SINGLE(WM8915_RIGHT_PDM_SPEAKER, 0, 4, spk_text); - -static const struct snd_kcontrol_new spkr_mux = - SOC_DAPM_ENUM("SPKR", spkr_enum); - -static const char *dsp1rx_text[] = { - "AIF1", "AIF2" -}; - -static const struct soc_enum dsp1rx_enum = - SOC_ENUM_SINGLE(WM8915_POWER_MANAGEMENT_8, 0, 2, dsp1rx_text); - -static const struct snd_kcontrol_new dsp1rx = - SOC_DAPM_ENUM("DSP1RX", dsp1rx_enum); - -static const char *dsp2rx_text[] = { - "AIF2", "AIF1" -}; - -static const struct soc_enum dsp2rx_enum = - SOC_ENUM_SINGLE(WM8915_POWER_MANAGEMENT_8, 4, 2, dsp2rx_text); - -static const struct snd_kcontrol_new dsp2rx = - SOC_DAPM_ENUM("DSP2RX", dsp2rx_enum); - -static const char *aif2tx_text[] = { - "DSP2", "DSP1", "AIF1" -}; - -static const struct soc_enum aif2tx_enum = - SOC_ENUM_SINGLE(WM8915_POWER_MANAGEMENT_8, 6, 3, aif2tx_text); - -static const struct snd_kcontrol_new aif2tx = - SOC_DAPM_ENUM("AIF2TX", aif2tx_enum); - -static const char *inmux_text[] = { - "ADC", "DMIC1", "DMIC2" -}; - -static const struct soc_enum in1_enum = - SOC_ENUM_SINGLE(WM8915_POWER_MANAGEMENT_7, 0, 3, inmux_text); - -static const struct snd_kcontrol_new in1_mux = - SOC_DAPM_ENUM("IN1 Mux", in1_enum); - -static const struct soc_enum in2_enum = - SOC_ENUM_SINGLE(WM8915_POWER_MANAGEMENT_7, 4, 3, inmux_text); - -static const struct snd_kcontrol_new in2_mux = - SOC_DAPM_ENUM("IN2 Mux", in2_enum); - -static const struct snd_kcontrol_new dac2r_mix[] = { -SOC_DAPM_SINGLE("Right Sidetone Switch", WM8915_DAC2_RIGHT_MIXER_ROUTING, - 5, 1, 0), -SOC_DAPM_SINGLE("Left Sidetone Switch", WM8915_DAC2_RIGHT_MIXER_ROUTING, - 4, 1, 0), -SOC_DAPM_SINGLE("DSP2 Switch", WM8915_DAC2_RIGHT_MIXER_ROUTING, 1, 1, 0), -SOC_DAPM_SINGLE("DSP1 Switch", WM8915_DAC2_RIGHT_MIXER_ROUTING, 0, 1, 0), -}; - -static const struct snd_kcontrol_new dac2l_mix[] = { -SOC_DAPM_SINGLE("Right Sidetone Switch", WM8915_DAC2_LEFT_MIXER_ROUTING, - 5, 1, 0), -SOC_DAPM_SINGLE("Left Sidetone Switch", WM8915_DAC2_LEFT_MIXER_ROUTING, - 4, 1, 0), -SOC_DAPM_SINGLE("DSP2 Switch", WM8915_DAC2_LEFT_MIXER_ROUTING, 1, 1, 0), -SOC_DAPM_SINGLE("DSP1 Switch", WM8915_DAC2_LEFT_MIXER_ROUTING, 0, 1, 0), -}; - -static const struct snd_kcontrol_new dac1r_mix[] = { -SOC_DAPM_SINGLE("Right Sidetone Switch", WM8915_DAC1_RIGHT_MIXER_ROUTING, - 5, 1, 0), -SOC_DAPM_SINGLE("Left Sidetone Switch", WM8915_DAC1_RIGHT_MIXER_ROUTING, - 4, 1, 0), -SOC_DAPM_SINGLE("DSP2 Switch", WM8915_DAC1_RIGHT_MIXER_ROUTING, 1, 1, 0), -SOC_DAPM_SINGLE("DSP1 Switch", WM8915_DAC1_RIGHT_MIXER_ROUTING, 0, 1, 0), -}; - -static const struct snd_kcontrol_new dac1l_mix[] = { -SOC_DAPM_SINGLE("Right Sidetone Switch", WM8915_DAC1_LEFT_MIXER_ROUTING, - 5, 1, 0), -SOC_DAPM_SINGLE("Left Sidetone Switch", WM8915_DAC1_LEFT_MIXER_ROUTING, - 4, 1, 0), -SOC_DAPM_SINGLE("DSP2 Switch", WM8915_DAC1_LEFT_MIXER_ROUTING, 1, 1, 0), -SOC_DAPM_SINGLE("DSP1 Switch", WM8915_DAC1_LEFT_MIXER_ROUTING, 0, 1, 0), -}; - -static const struct snd_kcontrol_new dsp1txl[] = { -SOC_DAPM_SINGLE("IN1 Switch", WM8915_DSP1_TX_LEFT_MIXER_ROUTING, - 1, 1, 0), -SOC_DAPM_SINGLE("DAC Switch", WM8915_DSP1_TX_LEFT_MIXER_ROUTING, - 0, 1, 0), -}; - -static const struct snd_kcontrol_new dsp1txr[] = { -SOC_DAPM_SINGLE("IN1 Switch", WM8915_DSP1_TX_RIGHT_MIXER_ROUTING, - 1, 1, 0), -SOC_DAPM_SINGLE("DAC Switch", WM8915_DSP1_TX_RIGHT_MIXER_ROUTING, - 0, 1, 0), -}; - -static const struct snd_kcontrol_new dsp2txl[] = { -SOC_DAPM_SINGLE("IN1 Switch", WM8915_DSP2_TX_LEFT_MIXER_ROUTING, - 1, 1, 0), -SOC_DAPM_SINGLE("DAC Switch", WM8915_DSP2_TX_LEFT_MIXER_ROUTING, - 0, 1, 0), -}; - -static const struct snd_kcontrol_new dsp2txr[] = { -SOC_DAPM_SINGLE("IN1 Switch", WM8915_DSP2_TX_RIGHT_MIXER_ROUTING, - 1, 1, 0), -SOC_DAPM_SINGLE("DAC Switch", WM8915_DSP2_TX_RIGHT_MIXER_ROUTING, - 0, 1, 0), -}; - - -static const struct snd_soc_dapm_widget wm8915_dapm_widgets[] = { -SND_SOC_DAPM_INPUT("IN1LN"), -SND_SOC_DAPM_INPUT("IN1LP"), -SND_SOC_DAPM_INPUT("IN1RN"), -SND_SOC_DAPM_INPUT("IN1RP"), - -SND_SOC_DAPM_INPUT("IN2LN"), -SND_SOC_DAPM_INPUT("IN2LP"), -SND_SOC_DAPM_INPUT("IN2RN"), -SND_SOC_DAPM_INPUT("IN2RP"), - -SND_SOC_DAPM_INPUT("DMIC1DAT"), -SND_SOC_DAPM_INPUT("DMIC2DAT"), - -SND_SOC_DAPM_SUPPLY_S("SYSCLK", 1, WM8915_AIF_CLOCKING_1, 0, 0, NULL, 0), -SND_SOC_DAPM_SUPPLY_S("SYSDSPCLK", 2, WM8915_CLOCKING_1, 1, 0, NULL, 0), -SND_SOC_DAPM_SUPPLY_S("AIFCLK", 2, WM8915_CLOCKING_1, 2, 0, NULL, 0), -SND_SOC_DAPM_SUPPLY_S("Charge Pump", 2, WM8915_CHARGE_PUMP_1, 15, 0, cp_event, - SND_SOC_DAPM_POST_PMU), - -SND_SOC_DAPM_SUPPLY("LDO2", WM8915_POWER_MANAGEMENT_2, 1, 0, NULL, 0), -SND_SOC_DAPM_MICBIAS("MICB2", WM8915_POWER_MANAGEMENT_1, 9, 0), -SND_SOC_DAPM_MICBIAS("MICB1", WM8915_POWER_MANAGEMENT_1, 8, 0), - -SND_SOC_DAPM_PGA("IN1L PGA", WM8915_POWER_MANAGEMENT_2, 5, 0, NULL, 0), -SND_SOC_DAPM_PGA("IN1R PGA", WM8915_POWER_MANAGEMENT_2, 4, 0, NULL, 0), - -SND_SOC_DAPM_MUX("IN1L Mux", SND_SOC_NOPM, 0, 0, &in1_mux), -SND_SOC_DAPM_MUX("IN1R Mux", SND_SOC_NOPM, 0, 0, &in1_mux), -SND_SOC_DAPM_MUX("IN2L Mux", SND_SOC_NOPM, 0, 0, &in2_mux), -SND_SOC_DAPM_MUX("IN2R Mux", SND_SOC_NOPM, 0, 0, &in2_mux), - -SND_SOC_DAPM_PGA("IN1L", WM8915_POWER_MANAGEMENT_7, 2, 0, NULL, 0), -SND_SOC_DAPM_PGA("IN1R", WM8915_POWER_MANAGEMENT_7, 3, 0, NULL, 0), -SND_SOC_DAPM_PGA("IN2L", WM8915_POWER_MANAGEMENT_7, 6, 0, NULL, 0), -SND_SOC_DAPM_PGA("IN2R", WM8915_POWER_MANAGEMENT_7, 7, 0, NULL, 0), - -SND_SOC_DAPM_SUPPLY("DMIC2", WM8915_POWER_MANAGEMENT_7, 9, 0, NULL, 0), -SND_SOC_DAPM_SUPPLY("DMIC1", WM8915_POWER_MANAGEMENT_7, 8, 0, NULL, 0), - -SND_SOC_DAPM_ADC("DMIC2L", NULL, WM8915_POWER_MANAGEMENT_3, 5, 0), -SND_SOC_DAPM_ADC("DMIC2R", NULL, WM8915_POWER_MANAGEMENT_3, 4, 0), -SND_SOC_DAPM_ADC("DMIC1L", NULL, WM8915_POWER_MANAGEMENT_3, 3, 0), -SND_SOC_DAPM_ADC("DMIC1R", NULL, WM8915_POWER_MANAGEMENT_3, 2, 0), - -SND_SOC_DAPM_ADC("ADCL", NULL, WM8915_POWER_MANAGEMENT_3, 1, 0), -SND_SOC_DAPM_ADC("ADCR", NULL, WM8915_POWER_MANAGEMENT_3, 0, 0), - -SND_SOC_DAPM_MUX("Left Sidetone", SND_SOC_NOPM, 0, 0, &left_sidetone), -SND_SOC_DAPM_MUX("Right Sidetone", SND_SOC_NOPM, 0, 0, &right_sidetone), - -SND_SOC_DAPM_AIF_IN("DSP2RXL", NULL, 0, WM8915_POWER_MANAGEMENT_3, 11, 0), -SND_SOC_DAPM_AIF_IN("DSP2RXR", NULL, 1, WM8915_POWER_MANAGEMENT_3, 10, 0), -SND_SOC_DAPM_AIF_IN("DSP1RXL", NULL, 0, WM8915_POWER_MANAGEMENT_3, 9, 0), -SND_SOC_DAPM_AIF_IN("DSP1RXR", NULL, 1, WM8915_POWER_MANAGEMENT_3, 8, 0), - -SND_SOC_DAPM_MIXER("DSP2TXL", WM8915_POWER_MANAGEMENT_5, 11, 0, - dsp2txl, ARRAY_SIZE(dsp2txl)), -SND_SOC_DAPM_MIXER("DSP2TXR", WM8915_POWER_MANAGEMENT_5, 10, 0, - dsp2txr, ARRAY_SIZE(dsp2txr)), -SND_SOC_DAPM_MIXER("DSP1TXL", WM8915_POWER_MANAGEMENT_5, 9, 0, - dsp1txl, ARRAY_SIZE(dsp1txl)), -SND_SOC_DAPM_MIXER("DSP1TXR", WM8915_POWER_MANAGEMENT_5, 8, 0, - dsp1txr, ARRAY_SIZE(dsp1txr)), - -SND_SOC_DAPM_MIXER("DAC2L Mixer", SND_SOC_NOPM, 0, 0, - dac2l_mix, ARRAY_SIZE(dac2l_mix)), -SND_SOC_DAPM_MIXER("DAC2R Mixer", SND_SOC_NOPM, 0, 0, - dac2r_mix, ARRAY_SIZE(dac2r_mix)), -SND_SOC_DAPM_MIXER("DAC1L Mixer", SND_SOC_NOPM, 0, 0, - dac1l_mix, ARRAY_SIZE(dac1l_mix)), -SND_SOC_DAPM_MIXER("DAC1R Mixer", SND_SOC_NOPM, 0, 0, - dac1r_mix, ARRAY_SIZE(dac1r_mix)), - -SND_SOC_DAPM_DAC("DAC2L", NULL, WM8915_POWER_MANAGEMENT_5, 3, 0), -SND_SOC_DAPM_DAC("DAC2R", NULL, WM8915_POWER_MANAGEMENT_5, 2, 0), -SND_SOC_DAPM_DAC("DAC1L", NULL, WM8915_POWER_MANAGEMENT_5, 1, 0), -SND_SOC_DAPM_DAC("DAC1R", NULL, WM8915_POWER_MANAGEMENT_5, 0, 0), - -SND_SOC_DAPM_AIF_IN("AIF2RX1", "AIF2 Playback", 1, - WM8915_POWER_MANAGEMENT_4, 9, 0), -SND_SOC_DAPM_AIF_IN("AIF2RX0", "AIF2 Playback", 2, - WM8915_POWER_MANAGEMENT_4, 8, 0), - -SND_SOC_DAPM_AIF_IN("AIF2TX1", "AIF2 Capture", 1, - WM8915_POWER_MANAGEMENT_6, 9, 0), -SND_SOC_DAPM_AIF_IN("AIF2TX0", "AIF2 Capture", 2, - WM8915_POWER_MANAGEMENT_6, 8, 0), - -SND_SOC_DAPM_AIF_IN("AIF1RX5", "AIF1 Playback", 5, - WM8915_POWER_MANAGEMENT_4, 5, 0), -SND_SOC_DAPM_AIF_IN("AIF1RX4", "AIF1 Playback", 4, - WM8915_POWER_MANAGEMENT_4, 4, 0), -SND_SOC_DAPM_AIF_IN("AIF1RX3", "AIF1 Playback", 3, - WM8915_POWER_MANAGEMENT_4, 3, 0), -SND_SOC_DAPM_AIF_IN("AIF1RX2", "AIF1 Playback", 2, - WM8915_POWER_MANAGEMENT_4, 2, 0), -SND_SOC_DAPM_AIF_IN("AIF1RX1", "AIF1 Playback", 1, - WM8915_POWER_MANAGEMENT_4, 1, 0), -SND_SOC_DAPM_AIF_IN("AIF1RX0", "AIF1 Playback", 0, - WM8915_POWER_MANAGEMENT_4, 0, 0), - -SND_SOC_DAPM_AIF_OUT("AIF1TX5", "AIF1 Capture", 5, - WM8915_POWER_MANAGEMENT_6, 5, 0), -SND_SOC_DAPM_AIF_OUT("AIF1TX4", "AIF1 Capture", 4, - WM8915_POWER_MANAGEMENT_6, 4, 0), -SND_SOC_DAPM_AIF_OUT("AIF1TX3", "AIF1 Capture", 3, - WM8915_POWER_MANAGEMENT_6, 3, 0), -SND_SOC_DAPM_AIF_OUT("AIF1TX2", "AIF1 Capture", 2, - WM8915_POWER_MANAGEMENT_6, 2, 0), -SND_SOC_DAPM_AIF_OUT("AIF1TX1", "AIF1 Capture", 1, - WM8915_POWER_MANAGEMENT_6, 1, 0), -SND_SOC_DAPM_AIF_OUT("AIF1TX0", "AIF1 Capture", 0, - WM8915_POWER_MANAGEMENT_6, 0, 0), - -/* We route as stereo pairs so define some dummy widgets to squash - * things down for now. RXA = 0,1, RXB = 2,3 and so on */ -SND_SOC_DAPM_PGA("AIF1RXA", SND_SOC_NOPM, 0, 0, NULL, 0), -SND_SOC_DAPM_PGA("AIF1RXB", SND_SOC_NOPM, 0, 0, NULL, 0), -SND_SOC_DAPM_PGA("AIF1RXC", SND_SOC_NOPM, 0, 0, NULL, 0), -SND_SOC_DAPM_PGA("AIF2RX", SND_SOC_NOPM, 0, 0, NULL, 0), -SND_SOC_DAPM_PGA("DSP2TX", SND_SOC_NOPM, 0, 0, NULL, 0), - -SND_SOC_DAPM_MUX("DSP1RX", SND_SOC_NOPM, 0, 0, &dsp1rx), -SND_SOC_DAPM_MUX("DSP2RX", SND_SOC_NOPM, 0, 0, &dsp2rx), -SND_SOC_DAPM_MUX("AIF2TX", SND_SOC_NOPM, 0, 0, &aif2tx), - -SND_SOC_DAPM_MUX("SPKL", SND_SOC_NOPM, 0, 0, &spkl_mux), -SND_SOC_DAPM_MUX("SPKR", SND_SOC_NOPM, 0, 0, &spkr_mux), -SND_SOC_DAPM_PGA("SPKL PGA", WM8915_LEFT_PDM_SPEAKER, 4, 0, NULL, 0), -SND_SOC_DAPM_PGA("SPKR PGA", WM8915_RIGHT_PDM_SPEAKER, 4, 0, NULL, 0), - -SND_SOC_DAPM_PGA_S("HPOUT2L PGA", 0, WM8915_POWER_MANAGEMENT_1, 7, 0, NULL, 0), -SND_SOC_DAPM_PGA_S("HPOUT2L_DLY", 1, WM8915_ANALOGUE_HP_2, 5, 0, NULL, 0), -SND_SOC_DAPM_PGA_S("HPOUT2L_DCS", 2, WM8915_DC_SERVO_1, 2, 0, dcs_start, - SND_SOC_DAPM_POST_PMU), -SND_SOC_DAPM_PGA_S("HPOUT2L_OUTP", 3, WM8915_ANALOGUE_HP_2, 6, 0, NULL, 0), -SND_SOC_DAPM_PGA_S("HPOUT2L_RMV_SHORT", 3, SND_SOC_NOPM, HPOUT2L, 0, - rmv_short_event, - SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD), - -SND_SOC_DAPM_PGA_S("HPOUT2R PGA", 0, WM8915_POWER_MANAGEMENT_1, 6, 0,NULL, 0), -SND_SOC_DAPM_PGA_S("HPOUT2R_DLY", 1, WM8915_ANALOGUE_HP_2, 1, 0, NULL, 0), -SND_SOC_DAPM_PGA_S("HPOUT2R_DCS", 2, WM8915_DC_SERVO_1, 3, 0, dcs_start, - SND_SOC_DAPM_POST_PMU), -SND_SOC_DAPM_PGA_S("HPOUT2R_OUTP", 3, WM8915_ANALOGUE_HP_2, 2, 0, NULL, 0), -SND_SOC_DAPM_PGA_S("HPOUT2R_RMV_SHORT", 3, SND_SOC_NOPM, HPOUT2R, 0, - rmv_short_event, - SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD), - -SND_SOC_DAPM_PGA_S("HPOUT1L PGA", 0, WM8915_POWER_MANAGEMENT_1, 5, 0, NULL, 0), -SND_SOC_DAPM_PGA_S("HPOUT1L_DLY", 1, WM8915_ANALOGUE_HP_1, 5, 0, NULL, 0), -SND_SOC_DAPM_PGA_S("HPOUT1L_DCS", 2, WM8915_DC_SERVO_1, 0, 0, dcs_start, - SND_SOC_DAPM_POST_PMU), -SND_SOC_DAPM_PGA_S("HPOUT1L_OUTP", 3, WM8915_ANALOGUE_HP_1, 6, 0, NULL, 0), -SND_SOC_DAPM_PGA_S("HPOUT1L_RMV_SHORT", 3, SND_SOC_NOPM, HPOUT1L, 0, - rmv_short_event, - SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD), - -SND_SOC_DAPM_PGA_S("HPOUT1R PGA", 0, WM8915_POWER_MANAGEMENT_1, 4, 0, NULL, 0), -SND_SOC_DAPM_PGA_S("HPOUT1R_DLY", 1, WM8915_ANALOGUE_HP_1, 1, 0, NULL, 0), -SND_SOC_DAPM_PGA_S("HPOUT1R_DCS", 2, WM8915_DC_SERVO_1, 1, 0, dcs_start, - SND_SOC_DAPM_POST_PMU), -SND_SOC_DAPM_PGA_S("HPOUT1R_OUTP", 3, WM8915_ANALOGUE_HP_1, 2, 0, NULL, 0), -SND_SOC_DAPM_PGA_S("HPOUT1R_RMV_SHORT", 3, SND_SOC_NOPM, HPOUT1R, 0, - rmv_short_event, - SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD), - -SND_SOC_DAPM_OUTPUT("HPOUT1L"), -SND_SOC_DAPM_OUTPUT("HPOUT1R"), -SND_SOC_DAPM_OUTPUT("HPOUT2L"), -SND_SOC_DAPM_OUTPUT("HPOUT2R"), -SND_SOC_DAPM_OUTPUT("SPKDAT"), -}; - -static const struct snd_soc_dapm_route wm8915_dapm_routes[] = { - { "AIFCLK", NULL, "SYSCLK" }, - { "SYSDSPCLK", NULL, "SYSCLK" }, - { "Charge Pump", NULL, "SYSCLK" }, - - { "MICB1", NULL, "LDO2" }, - { "MICB2", NULL, "LDO2" }, - - { "IN1L PGA", NULL, "IN2LN" }, - { "IN1L PGA", NULL, "IN2LP" }, - { "IN1L PGA", NULL, "IN1LN" }, - { "IN1L PGA", NULL, "IN1LP" }, - - { "IN1R PGA", NULL, "IN2RN" }, - { "IN1R PGA", NULL, "IN2RP" }, - { "IN1R PGA", NULL, "IN1RN" }, - { "IN1R PGA", NULL, "IN1RP" }, - - { "ADCL", NULL, "IN1L PGA" }, - - { "ADCR", NULL, "IN1R PGA" }, - - { "DMIC1L", NULL, "DMIC1DAT" }, - { "DMIC1R", NULL, "DMIC1DAT" }, - { "DMIC2L", NULL, "DMIC2DAT" }, - { "DMIC2R", NULL, "DMIC2DAT" }, - - { "DMIC2L", NULL, "DMIC2" }, - { "DMIC2R", NULL, "DMIC2" }, - { "DMIC1L", NULL, "DMIC1" }, - { "DMIC1R", NULL, "DMIC1" }, - - { "IN1L Mux", "ADC", "ADCL" }, - { "IN1L Mux", "DMIC1", "DMIC1L" }, - { "IN1L Mux", "DMIC2", "DMIC2L" }, - - { "IN1R Mux", "ADC", "ADCR" }, - { "IN1R Mux", "DMIC1", "DMIC1R" }, - { "IN1R Mux", "DMIC2", "DMIC2R" }, - - { "IN2L Mux", "ADC", "ADCL" }, - { "IN2L Mux", "DMIC1", "DMIC1L" }, - { "IN2L Mux", "DMIC2", "DMIC2L" }, - - { "IN2R Mux", "ADC", "ADCR" }, - { "IN2R Mux", "DMIC1", "DMIC1R" }, - { "IN2R Mux", "DMIC2", "DMIC2R" }, - - { "Left Sidetone", "IN1", "IN1L Mux" }, - { "Left Sidetone", "IN2", "IN2L Mux" }, - - { "Right Sidetone", "IN1", "IN1R Mux" }, - { "Right Sidetone", "IN2", "IN2R Mux" }, - - { "DSP1TXL", "IN1 Switch", "IN1L Mux" }, - { "DSP1TXR", "IN1 Switch", "IN1R Mux" }, - - { "DSP2TXL", "IN1 Switch", "IN2L Mux" }, - { "DSP2TXR", "IN1 Switch", "IN2R Mux" }, - - { "AIF1TX0", NULL, "DSP1TXL" }, - { "AIF1TX1", NULL, "DSP1TXR" }, - { "AIF1TX2", NULL, "DSP2TXL" }, - { "AIF1TX3", NULL, "DSP2TXR" }, - { "AIF1TX4", NULL, "AIF2RX0" }, - { "AIF1TX5", NULL, "AIF2RX1" }, - - { "AIF1RX0", NULL, "AIFCLK" }, - { "AIF1RX1", NULL, "AIFCLK" }, - { "AIF1RX2", NULL, "AIFCLK" }, - { "AIF1RX3", NULL, "AIFCLK" }, - { "AIF1RX4", NULL, "AIFCLK" }, - { "AIF1RX5", NULL, "AIFCLK" }, - - { "AIF2RX0", NULL, "AIFCLK" }, - { "AIF2RX1", NULL, "AIFCLK" }, - - { "DSP1RXL", NULL, "SYSDSPCLK" }, - { "DSP1RXR", NULL, "SYSDSPCLK" }, - { "DSP2RXL", NULL, "SYSDSPCLK" }, - { "DSP2RXR", NULL, "SYSDSPCLK" }, - { "DSP1TXL", NULL, "SYSDSPCLK" }, - { "DSP1TXR", NULL, "SYSDSPCLK" }, - { "DSP2TXL", NULL, "SYSDSPCLK" }, - { "DSP2TXR", NULL, "SYSDSPCLK" }, - - { "AIF1RXA", NULL, "AIF1RX0" }, - { "AIF1RXA", NULL, "AIF1RX1" }, - { "AIF1RXB", NULL, "AIF1RX2" }, - { "AIF1RXB", NULL, "AIF1RX3" }, - { "AIF1RXC", NULL, "AIF1RX4" }, - { "AIF1RXC", NULL, "AIF1RX5" }, - - { "AIF2RX", NULL, "AIF2RX0" }, - { "AIF2RX", NULL, "AIF2RX1" }, - - { "AIF2TX", "DSP2", "DSP2TX" }, - { "AIF2TX", "DSP1", "DSP1RX" }, - { "AIF2TX", "AIF1", "AIF1RXC" }, - - { "DSP1RXL", NULL, "DSP1RX" }, - { "DSP1RXR", NULL, "DSP1RX" }, - { "DSP2RXL", NULL, "DSP2RX" }, - { "DSP2RXR", NULL, "DSP2RX" }, - - { "DSP2TX", NULL, "DSP2TXL" }, - { "DSP2TX", NULL, "DSP2TXR" }, - - { "DSP1RX", "AIF1", "AIF1RXA" }, - { "DSP1RX", "AIF2", "AIF2RX" }, - - { "DSP2RX", "AIF1", "AIF1RXB" }, - { "DSP2RX", "AIF2", "AIF2RX" }, - - { "DAC2L Mixer", "DSP2 Switch", "DSP2RXL" }, - { "DAC2L Mixer", "DSP1 Switch", "DSP1RXL" }, - { "DAC2L Mixer", "Right Sidetone Switch", "Right Sidetone" }, - { "DAC2L Mixer", "Left Sidetone Switch", "Left Sidetone" }, - - { "DAC2R Mixer", "DSP2 Switch", "DSP2RXR" }, - { "DAC2R Mixer", "DSP1 Switch", "DSP1RXR" }, - { "DAC2R Mixer", "Right Sidetone Switch", "Right Sidetone" }, - { "DAC2R Mixer", "Left Sidetone Switch", "Left Sidetone" }, - - { "DAC1L Mixer", "DSP2 Switch", "DSP2RXL" }, - { "DAC1L Mixer", "DSP1 Switch", "DSP1RXL" }, - { "DAC1L Mixer", "Right Sidetone Switch", "Right Sidetone" }, - { "DAC1L Mixer", "Left Sidetone Switch", "Left Sidetone" }, - - { "DAC1R Mixer", "DSP2 Switch", "DSP2RXR" }, - { "DAC1R Mixer", "DSP1 Switch", "DSP1RXR" }, - { "DAC1R Mixer", "Right Sidetone Switch", "Right Sidetone" }, - { "DAC1R Mixer", "Left Sidetone Switch", "Left Sidetone" }, - - { "DAC1L", NULL, "DAC1L Mixer" }, - { "DAC1R", NULL, "DAC1R Mixer" }, - { "DAC2L", NULL, "DAC2L Mixer" }, - { "DAC2R", NULL, "DAC2R Mixer" }, - - { "HPOUT2L PGA", NULL, "Charge Pump" }, - { "HPOUT2L PGA", NULL, "DAC2L" }, - { "HPOUT2L_DLY", NULL, "HPOUT2L PGA" }, - { "HPOUT2L_DCS", NULL, "HPOUT2L_DLY" }, - { "HPOUT2L_OUTP", NULL, "HPOUT2L_DCS" }, - { "HPOUT2L_RMV_SHORT", NULL, "HPOUT2L_OUTP" }, - - { "HPOUT2R PGA", NULL, "Charge Pump" }, - { "HPOUT2R PGA", NULL, "DAC2R" }, - { "HPOUT2R_DLY", NULL, "HPOUT2R PGA" }, - { "HPOUT2R_DCS", NULL, "HPOUT2R_DLY" }, - { "HPOUT2R_OUTP", NULL, "HPOUT2R_DCS" }, - { "HPOUT2R_RMV_SHORT", NULL, "HPOUT2R_OUTP" }, - - { "HPOUT1L PGA", NULL, "Charge Pump" }, - { "HPOUT1L PGA", NULL, "DAC1L" }, - { "HPOUT1L_DLY", NULL, "HPOUT1L PGA" }, - { "HPOUT1L_DCS", NULL, "HPOUT1L_DLY" }, - { "HPOUT1L_OUTP", NULL, "HPOUT1L_DCS" }, - { "HPOUT1L_RMV_SHORT", NULL, "HPOUT1L_OUTP" }, - - { "HPOUT1R PGA", NULL, "Charge Pump" }, - { "HPOUT1R PGA", NULL, "DAC1R" }, - { "HPOUT1R_DLY", NULL, "HPOUT1R PGA" }, - { "HPOUT1R_DCS", NULL, "HPOUT1R_DLY" }, - { "HPOUT1R_OUTP", NULL, "HPOUT1R_DCS" }, - { "HPOUT1R_RMV_SHORT", NULL, "HPOUT1R_OUTP" }, - - { "HPOUT2L", NULL, "HPOUT2L_RMV_SHORT" }, - { "HPOUT2R", NULL, "HPOUT2R_RMV_SHORT" }, - { "HPOUT1L", NULL, "HPOUT1L_RMV_SHORT" }, - { "HPOUT1R", NULL, "HPOUT1R_RMV_SHORT" }, - - { "SPKL", "DAC1L", "DAC1L" }, - { "SPKL", "DAC1R", "DAC1R" }, - { "SPKL", "DAC2L", "DAC2L" }, - { "SPKL", "DAC2R", "DAC2R" }, - - { "SPKR", "DAC1L", "DAC1L" }, - { "SPKR", "DAC1R", "DAC1R" }, - { "SPKR", "DAC2L", "DAC2L" }, - { "SPKR", "DAC2R", "DAC2R" }, - - { "SPKL PGA", NULL, "SPKL" }, - { "SPKR PGA", NULL, "SPKR" }, - - { "SPKDAT", NULL, "SPKL PGA" }, - { "SPKDAT", NULL, "SPKR PGA" }, -}; - -static int wm8915_readable_register(struct snd_soc_codec *codec, - unsigned int reg) -{ - /* Due to the sparseness of the register map the compiler - * output from an explicit switch statement ends up being much - * more efficient than a table. - */ - switch (reg) { - case WM8915_SOFTWARE_RESET: - case WM8915_POWER_MANAGEMENT_1: - case WM8915_POWER_MANAGEMENT_2: - case WM8915_POWER_MANAGEMENT_3: - case WM8915_POWER_MANAGEMENT_4: - case WM8915_POWER_MANAGEMENT_5: - case WM8915_POWER_MANAGEMENT_6: - case WM8915_POWER_MANAGEMENT_7: - case WM8915_POWER_MANAGEMENT_8: - case WM8915_LEFT_LINE_INPUT_VOLUME: - case WM8915_RIGHT_LINE_INPUT_VOLUME: - case WM8915_LINE_INPUT_CONTROL: - case WM8915_DAC1_HPOUT1_VOLUME: - case WM8915_DAC2_HPOUT2_VOLUME: - case WM8915_DAC1_LEFT_VOLUME: - case WM8915_DAC1_RIGHT_VOLUME: - case WM8915_DAC2_LEFT_VOLUME: - case WM8915_DAC2_RIGHT_VOLUME: - case WM8915_OUTPUT1_LEFT_VOLUME: - case WM8915_OUTPUT1_RIGHT_VOLUME: - case WM8915_OUTPUT2_LEFT_VOLUME: - case WM8915_OUTPUT2_RIGHT_VOLUME: - case WM8915_MICBIAS_1: - case WM8915_MICBIAS_2: - case WM8915_LDO_1: - case WM8915_LDO_2: - case WM8915_ACCESSORY_DETECT_MODE_1: - case WM8915_ACCESSORY_DETECT_MODE_2: - case WM8915_HEADPHONE_DETECT_1: - case WM8915_HEADPHONE_DETECT_2: - case WM8915_MIC_DETECT_1: - case WM8915_MIC_DETECT_2: - case WM8915_MIC_DETECT_3: - case WM8915_CHARGE_PUMP_1: - case WM8915_CHARGE_PUMP_2: - case WM8915_DC_SERVO_1: - case WM8915_DC_SERVO_2: - case WM8915_DC_SERVO_3: - case WM8915_DC_SERVO_5: - case WM8915_DC_SERVO_6: - case WM8915_DC_SERVO_7: - case WM8915_DC_SERVO_READBACK_0: - case WM8915_ANALOGUE_HP_1: - case WM8915_ANALOGUE_HP_2: - case WM8915_CHIP_REVISION: - case WM8915_CONTROL_INTERFACE_1: - case WM8915_WRITE_SEQUENCER_CTRL_1: - case WM8915_WRITE_SEQUENCER_CTRL_2: - case WM8915_AIF_CLOCKING_1: - case WM8915_AIF_CLOCKING_2: - case WM8915_CLOCKING_1: - case WM8915_CLOCKING_2: - case WM8915_AIF_RATE: - case WM8915_FLL_CONTROL_1: - case WM8915_FLL_CONTROL_2: - case WM8915_FLL_CONTROL_3: - case WM8915_FLL_CONTROL_4: - case WM8915_FLL_CONTROL_5: - case WM8915_FLL_CONTROL_6: - case WM8915_FLL_EFS_1: - case WM8915_FLL_EFS_2: - case WM8915_AIF1_CONTROL: - case WM8915_AIF1_BCLK: - case WM8915_AIF1_TX_LRCLK_1: - case WM8915_AIF1_TX_LRCLK_2: - case WM8915_AIF1_RX_LRCLK_1: - case WM8915_AIF1_RX_LRCLK_2: - case WM8915_AIF1TX_DATA_CONFIGURATION_1: - case WM8915_AIF1TX_DATA_CONFIGURATION_2: - case WM8915_AIF1RX_DATA_CONFIGURATION: - case WM8915_AIF1TX_CHANNEL_0_CONFIGURATION: - case WM8915_AIF1TX_CHANNEL_1_CONFIGURATION: - case WM8915_AIF1TX_CHANNEL_2_CONFIGURATION: - case WM8915_AIF1TX_CHANNEL_3_CONFIGURATION: - case WM8915_AIF1TX_CHANNEL_4_CONFIGURATION: - case WM8915_AIF1TX_CHANNEL_5_CONFIGURATION: - case WM8915_AIF1RX_CHANNEL_0_CONFIGURATION: - case WM8915_AIF1RX_CHANNEL_1_CONFIGURATION: - case WM8915_AIF1RX_CHANNEL_2_CONFIGURATION: - case WM8915_AIF1RX_CHANNEL_3_CONFIGURATION: - case WM8915_AIF1RX_CHANNEL_4_CONFIGURATION: - case WM8915_AIF1RX_CHANNEL_5_CONFIGURATION: - case WM8915_AIF1RX_MONO_CONFIGURATION: - case WM8915_AIF1TX_TEST: - case WM8915_AIF2_CONTROL: - case WM8915_AIF2_BCLK: - case WM8915_AIF2_TX_LRCLK_1: - case WM8915_AIF2_TX_LRCLK_2: - case WM8915_AIF2_RX_LRCLK_1: - case WM8915_AIF2_RX_LRCLK_2: - case WM8915_AIF2TX_DATA_CONFIGURATION_1: - case WM8915_AIF2TX_DATA_CONFIGURATION_2: - case WM8915_AIF2RX_DATA_CONFIGURATION: - case WM8915_AIF2TX_CHANNEL_0_CONFIGURATION: - case WM8915_AIF2TX_CHANNEL_1_CONFIGURATION: - case WM8915_AIF2RX_CHANNEL_0_CONFIGURATION: - case WM8915_AIF2RX_CHANNEL_1_CONFIGURATION: - case WM8915_AIF2RX_MONO_CONFIGURATION: - case WM8915_AIF2TX_TEST: - case WM8915_DSP1_TX_LEFT_VOLUME: - case WM8915_DSP1_TX_RIGHT_VOLUME: - case WM8915_DSP1_RX_LEFT_VOLUME: - case WM8915_DSP1_RX_RIGHT_VOLUME: - case WM8915_DSP1_TX_FILTERS: - case WM8915_DSP1_RX_FILTERS_1: - case WM8915_DSP1_RX_FILTERS_2: - case WM8915_DSP1_DRC_1: - case WM8915_DSP1_DRC_2: - case WM8915_DSP1_DRC_3: - case WM8915_DSP1_DRC_4: - case WM8915_DSP1_DRC_5: - case WM8915_DSP1_RX_EQ_GAINS_1: - case WM8915_DSP1_RX_EQ_GAINS_2: - case WM8915_DSP1_RX_EQ_BAND_1_A: - case WM8915_DSP1_RX_EQ_BAND_1_B: - case WM8915_DSP1_RX_EQ_BAND_1_PG: - case WM8915_DSP1_RX_EQ_BAND_2_A: - case WM8915_DSP1_RX_EQ_BAND_2_B: - case WM8915_DSP1_RX_EQ_BAND_2_C: - case WM8915_DSP1_RX_EQ_BAND_2_PG: - case WM8915_DSP1_RX_EQ_BAND_3_A: - case WM8915_DSP1_RX_EQ_BAND_3_B: - case WM8915_DSP1_RX_EQ_BAND_3_C: - case WM8915_DSP1_RX_EQ_BAND_3_PG: - case WM8915_DSP1_RX_EQ_BAND_4_A: - case WM8915_DSP1_RX_EQ_BAND_4_B: - case WM8915_DSP1_RX_EQ_BAND_4_C: - case WM8915_DSP1_RX_EQ_BAND_4_PG: - case WM8915_DSP1_RX_EQ_BAND_5_A: - case WM8915_DSP1_RX_EQ_BAND_5_B: - case WM8915_DSP1_RX_EQ_BAND_5_PG: - case WM8915_DSP2_TX_LEFT_VOLUME: - case WM8915_DSP2_TX_RIGHT_VOLUME: - case WM8915_DSP2_RX_LEFT_VOLUME: - case WM8915_DSP2_RX_RIGHT_VOLUME: - case WM8915_DSP2_TX_FILTERS: - case WM8915_DSP2_RX_FILTERS_1: - case WM8915_DSP2_RX_FILTERS_2: - case WM8915_DSP2_DRC_1: - case WM8915_DSP2_DRC_2: - case WM8915_DSP2_DRC_3: - case WM8915_DSP2_DRC_4: - case WM8915_DSP2_DRC_5: - case WM8915_DSP2_RX_EQ_GAINS_1: - case WM8915_DSP2_RX_EQ_GAINS_2: - case WM8915_DSP2_RX_EQ_BAND_1_A: - case WM8915_DSP2_RX_EQ_BAND_1_B: - case WM8915_DSP2_RX_EQ_BAND_1_PG: - case WM8915_DSP2_RX_EQ_BAND_2_A: - case WM8915_DSP2_RX_EQ_BAND_2_B: - case WM8915_DSP2_RX_EQ_BAND_2_C: - case WM8915_DSP2_RX_EQ_BAND_2_PG: - case WM8915_DSP2_RX_EQ_BAND_3_A: - case WM8915_DSP2_RX_EQ_BAND_3_B: - case WM8915_DSP2_RX_EQ_BAND_3_C: - case WM8915_DSP2_RX_EQ_BAND_3_PG: - case WM8915_DSP2_RX_EQ_BAND_4_A: - case WM8915_DSP2_RX_EQ_BAND_4_B: - case WM8915_DSP2_RX_EQ_BAND_4_C: - case WM8915_DSP2_RX_EQ_BAND_4_PG: - case WM8915_DSP2_RX_EQ_BAND_5_A: - case WM8915_DSP2_RX_EQ_BAND_5_B: - case WM8915_DSP2_RX_EQ_BAND_5_PG: - case WM8915_DAC1_MIXER_VOLUMES: - case WM8915_DAC1_LEFT_MIXER_ROUTING: - case WM8915_DAC1_RIGHT_MIXER_ROUTING: - case WM8915_DAC2_MIXER_VOLUMES: - case WM8915_DAC2_LEFT_MIXER_ROUTING: - case WM8915_DAC2_RIGHT_MIXER_ROUTING: - case WM8915_DSP1_TX_LEFT_MIXER_ROUTING: - case WM8915_DSP1_TX_RIGHT_MIXER_ROUTING: - case WM8915_DSP2_TX_LEFT_MIXER_ROUTING: - case WM8915_DSP2_TX_RIGHT_MIXER_ROUTING: - case WM8915_DSP_TX_MIXER_SELECT: - case WM8915_DAC_SOFTMUTE: - case WM8915_OVERSAMPLING: - case WM8915_SIDETONE: - case WM8915_GPIO_1: - case WM8915_GPIO_2: - case WM8915_GPIO_3: - case WM8915_GPIO_4: - case WM8915_GPIO_5: - case WM8915_PULL_CONTROL_1: - case WM8915_PULL_CONTROL_2: - case WM8915_INTERRUPT_STATUS_1: - case WM8915_INTERRUPT_STATUS_2: - case WM8915_INTERRUPT_RAW_STATUS_2: - case WM8915_INTERRUPT_STATUS_1_MASK: - case WM8915_INTERRUPT_STATUS_2_MASK: - case WM8915_INTERRUPT_CONTROL: - case WM8915_LEFT_PDM_SPEAKER: - case WM8915_RIGHT_PDM_SPEAKER: - case WM8915_PDM_SPEAKER_MUTE_SEQUENCE: - case WM8915_PDM_SPEAKER_VOLUME: - return 1; - default: - return 0; - } -} - -static int wm8915_volatile_register(struct snd_soc_codec *codec, - unsigned int reg) -{ - switch (reg) { - case WM8915_SOFTWARE_RESET: - case WM8915_CHIP_REVISION: - case WM8915_LDO_1: - case WM8915_LDO_2: - case WM8915_INTERRUPT_STATUS_1: - case WM8915_INTERRUPT_STATUS_2: - case WM8915_INTERRUPT_RAW_STATUS_2: - case WM8915_DC_SERVO_READBACK_0: - case WM8915_DC_SERVO_2: - case WM8915_DC_SERVO_6: - case WM8915_DC_SERVO_7: - case WM8915_FLL_CONTROL_6: - case WM8915_MIC_DETECT_3: - case WM8915_HEADPHONE_DETECT_1: - case WM8915_HEADPHONE_DETECT_2: - return 1; - default: - return 0; - } -} - -static int wm8915_reset(struct snd_soc_codec *codec) -{ - return snd_soc_write(codec, WM8915_SOFTWARE_RESET, 0x8915); -} - -static const int bclk_divs[] = { - 1, 2, 3, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96 -}; - -static void wm8915_update_bclk(struct snd_soc_codec *codec) -{ - struct wm8915_priv *wm8915 = snd_soc_codec_get_drvdata(codec); - int aif, best, cur_val, bclk_rate, bclk_reg, i; - - /* Don't bother if we're in a low frequency idle mode that - * can't support audio. - */ - if (wm8915->sysclk < 64000) - return; - - for (aif = 0; aif < WM8915_AIFS; aif++) { - switch (aif) { - case 0: - bclk_reg = WM8915_AIF1_BCLK; - break; - case 1: - bclk_reg = WM8915_AIF2_BCLK; - break; - } - - bclk_rate = wm8915->bclk_rate[aif]; - - /* Pick a divisor for BCLK as close as we can get to ideal */ - best = 0; - for (i = 0; i < ARRAY_SIZE(bclk_divs); i++) { - cur_val = (wm8915->sysclk / bclk_divs[i]) - bclk_rate; - if (cur_val < 0) /* BCLK table is sorted */ - break; - best = i; - } - bclk_rate = wm8915->sysclk / bclk_divs[best]; - dev_dbg(codec->dev, "Using BCLK_DIV %d for actual BCLK %dHz\n", - bclk_divs[best], bclk_rate); - - snd_soc_update_bits(codec, bclk_reg, - WM8915_AIF1_BCLK_DIV_MASK, best); - } -} - -static int wm8915_set_bias_level(struct snd_soc_codec *codec, - enum snd_soc_bias_level level) -{ - struct wm8915_priv *wm8915 = snd_soc_codec_get_drvdata(codec); - int ret; - - switch (level) { - case SND_SOC_BIAS_ON: - break; - - case SND_SOC_BIAS_PREPARE: - if (codec->dapm.bias_level == SND_SOC_BIAS_STANDBY) { - snd_soc_update_bits(codec, WM8915_POWER_MANAGEMENT_1, - WM8915_BG_ENA, WM8915_BG_ENA); - msleep(2); - } - break; - - case SND_SOC_BIAS_STANDBY: - if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) { - ret = regulator_bulk_enable(ARRAY_SIZE(wm8915->supplies), - wm8915->supplies); - if (ret != 0) { - dev_err(codec->dev, - "Failed to enable supplies: %d\n", - ret); - return ret; - } - - if (wm8915->pdata.ldo_ena >= 0) { - gpio_set_value_cansleep(wm8915->pdata.ldo_ena, - 1); - msleep(5); - } - - codec->cache_only = false; - snd_soc_cache_sync(codec); - } - - snd_soc_update_bits(codec, WM8915_POWER_MANAGEMENT_1, - WM8915_BG_ENA, 0); - break; - - case SND_SOC_BIAS_OFF: - codec->cache_only = true; - if (wm8915->pdata.ldo_ena >= 0) - gpio_set_value_cansleep(wm8915->pdata.ldo_ena, 0); - regulator_bulk_disable(ARRAY_SIZE(wm8915->supplies), - wm8915->supplies); - break; - } - - codec->dapm.bias_level = level; - - return 0; -} - -static int wm8915_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) -{ - struct snd_soc_codec *codec = dai->codec; - int aifctrl = 0; - int bclk = 0; - int lrclk_tx = 0; - int lrclk_rx = 0; - int aifctrl_reg, bclk_reg, lrclk_tx_reg, lrclk_rx_reg; - - switch (dai->id) { - case 0: - aifctrl_reg = WM8915_AIF1_CONTROL; - bclk_reg = WM8915_AIF1_BCLK; - lrclk_tx_reg = WM8915_AIF1_TX_LRCLK_2; - lrclk_rx_reg = WM8915_AIF1_RX_LRCLK_2; - break; - case 1: - aifctrl_reg = WM8915_AIF2_CONTROL; - bclk_reg = WM8915_AIF2_BCLK; - lrclk_tx_reg = WM8915_AIF2_TX_LRCLK_2; - lrclk_rx_reg = WM8915_AIF2_RX_LRCLK_2; - break; - default: - BUG(); - return -EINVAL; - } - - switch (fmt & SND_SOC_DAIFMT_INV_MASK) { - case SND_SOC_DAIFMT_NB_NF: - break; - case SND_SOC_DAIFMT_IB_NF: - bclk |= WM8915_AIF1_BCLK_INV; - break; - case SND_SOC_DAIFMT_NB_IF: - lrclk_tx |= WM8915_AIF1TX_LRCLK_INV; - lrclk_rx |= WM8915_AIF1RX_LRCLK_INV; - break; - case SND_SOC_DAIFMT_IB_IF: - bclk |= WM8915_AIF1_BCLK_INV; - lrclk_tx |= WM8915_AIF1TX_LRCLK_INV; - lrclk_rx |= WM8915_AIF1RX_LRCLK_INV; - break; - } - - switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { - case SND_SOC_DAIFMT_CBS_CFS: - break; - case SND_SOC_DAIFMT_CBS_CFM: - lrclk_tx |= WM8915_AIF1TX_LRCLK_MSTR; - lrclk_rx |= WM8915_AIF1RX_LRCLK_MSTR; - break; - case SND_SOC_DAIFMT_CBM_CFS: - bclk |= WM8915_AIF1_BCLK_MSTR; - break; - case SND_SOC_DAIFMT_CBM_CFM: - bclk |= WM8915_AIF1_BCLK_MSTR; - lrclk_tx |= WM8915_AIF1TX_LRCLK_MSTR; - lrclk_rx |= WM8915_AIF1RX_LRCLK_MSTR; - break; - default: - return -EINVAL; - } - - switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { - case SND_SOC_DAIFMT_DSP_A: - break; - case SND_SOC_DAIFMT_DSP_B: - aifctrl |= 1; - break; - case SND_SOC_DAIFMT_I2S: - aifctrl |= 2; - break; - case SND_SOC_DAIFMT_LEFT_J: - aifctrl |= 3; - break; - default: - return -EINVAL; - } - - snd_soc_update_bits(codec, aifctrl_reg, WM8915_AIF1_FMT_MASK, aifctrl); - snd_soc_update_bits(codec, bclk_reg, - WM8915_AIF1_BCLK_INV | WM8915_AIF1_BCLK_MSTR, - bclk); - snd_soc_update_bits(codec, lrclk_tx_reg, - WM8915_AIF1TX_LRCLK_INV | - WM8915_AIF1TX_LRCLK_MSTR, - lrclk_tx); - snd_soc_update_bits(codec, lrclk_rx_reg, - WM8915_AIF1RX_LRCLK_INV | - WM8915_AIF1RX_LRCLK_MSTR, - lrclk_rx); - - return 0; -} - -static const int dsp_divs[] = { - 48000, 32000, 16000, 8000 -}; - -static int wm8915_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params, - struct snd_soc_dai *dai) -{ - struct snd_soc_codec *codec = dai->codec; - struct wm8915_priv *wm8915 = snd_soc_codec_get_drvdata(codec); - int bits, i, bclk_rate; - int aifdata = 0; - int lrclk = 0; - int dsp = 0; - int aifdata_reg, lrclk_reg, dsp_shift; - - switch (dai->id) { - case 0: - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK || - (snd_soc_read(codec, WM8915_GPIO_1)) & WM8915_GP1_FN_MASK) { - aifdata_reg = WM8915_AIF1RX_DATA_CONFIGURATION; - lrclk_reg = WM8915_AIF1_RX_LRCLK_1; - } else { - aifdata_reg = WM8915_AIF1TX_DATA_CONFIGURATION_1; - lrclk_reg = WM8915_AIF1_TX_LRCLK_1; - } - dsp_shift = 0; - break; - case 1: - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK || - (snd_soc_read(codec, WM8915_GPIO_2)) & WM8915_GP2_FN_MASK) { - aifdata_reg = WM8915_AIF2RX_DATA_CONFIGURATION; - lrclk_reg = WM8915_AIF2_RX_LRCLK_1; - } else { - aifdata_reg = WM8915_AIF2TX_DATA_CONFIGURATION_1; - lrclk_reg = WM8915_AIF2_TX_LRCLK_1; - } - dsp_shift = WM8915_DSP2_DIV_SHIFT; - break; - default: - BUG(); - return -EINVAL; - } - - bclk_rate = snd_soc_params_to_bclk(params); - if (bclk_rate < 0) { - dev_err(codec->dev, "Unsupported BCLK rate: %d\n", bclk_rate); - return bclk_rate; - } - - wm8915->bclk_rate[dai->id] = bclk_rate; - wm8915->rx_rate[dai->id] = params_rate(params); - - /* Needs looking at for TDM */ - bits = snd_pcm_format_width(params_format(params)); - if (bits < 0) - return bits; - aifdata |= (bits << WM8915_AIF1TX_WL_SHIFT) | bits; - - for (i = 0; i < ARRAY_SIZE(dsp_divs); i++) { - if (dsp_divs[i] == params_rate(params)) - break; - } - if (i == ARRAY_SIZE(dsp_divs)) { - dev_err(codec->dev, "Unsupported sample rate %dHz\n", - params_rate(params)); - return -EINVAL; - } - dsp |= i << dsp_shift; - - wm8915_update_bclk(codec); - - lrclk = bclk_rate / params_rate(params); - dev_dbg(dai->dev, "Using LRCLK rate %d for actual LRCLK %dHz\n", - lrclk, bclk_rate / lrclk); - - snd_soc_update_bits(codec, aifdata_reg, - WM8915_AIF1TX_WL_MASK | - WM8915_AIF1TX_SLOT_LEN_MASK, - aifdata); - snd_soc_update_bits(codec, lrclk_reg, WM8915_AIF1RX_RATE_MASK, - lrclk); - snd_soc_update_bits(codec, WM8915_AIF_CLOCKING_2, - WM8915_DSP1_DIV_SHIFT << dsp_shift, dsp); - - return 0; -} - -static int wm8915_set_sysclk(struct snd_soc_dai *dai, - int clk_id, unsigned int freq, int dir) -{ - struct snd_soc_codec *codec = dai->codec; - struct wm8915_priv *wm8915 = snd_soc_codec_get_drvdata(codec); - int lfclk = 0; - int ratediv = 0; - int src; - int old; - - if (freq == wm8915->sysclk && clk_id == wm8915->sysclk_src) - return 0; - - /* Disable SYSCLK while we reconfigure */ - old = snd_soc_read(codec, WM8915_AIF_CLOCKING_1) & WM8915_SYSCLK_ENA; - snd_soc_update_bits(codec, WM8915_AIF_CLOCKING_1, - WM8915_SYSCLK_ENA, 0); - - switch (clk_id) { - case WM8915_SYSCLK_MCLK1: - wm8915->sysclk = freq; - src = 0; - break; - case WM8915_SYSCLK_MCLK2: - wm8915->sysclk = freq; - src = 1; - break; - case WM8915_SYSCLK_FLL: - wm8915->sysclk = freq; - src = 2; - break; - default: - dev_err(codec->dev, "Unsupported clock source %d\n", clk_id); - return -EINVAL; - } - - switch (wm8915->sysclk) { - case 6144000: - snd_soc_update_bits(codec, WM8915_AIF_RATE, - WM8915_SYSCLK_RATE, 0); - break; - case 24576000: - ratediv = WM8915_SYSCLK_DIV; - case 12288000: - snd_soc_update_bits(codec, WM8915_AIF_RATE, - WM8915_SYSCLK_RATE, WM8915_SYSCLK_RATE); - break; - case 32000: - case 32768: - lfclk = WM8915_LFCLK_ENA; - break; - default: - dev_warn(codec->dev, "Unsupported clock rate %dHz\n", - wm8915->sysclk); - return -EINVAL; - } - - wm8915_update_bclk(codec); - - snd_soc_update_bits(codec, WM8915_AIF_CLOCKING_1, - WM8915_SYSCLK_SRC_MASK | WM8915_SYSCLK_DIV_MASK, - src << WM8915_SYSCLK_SRC_SHIFT | ratediv); - snd_soc_update_bits(codec, WM8915_CLOCKING_1, WM8915_LFCLK_ENA, lfclk); - snd_soc_update_bits(codec, WM8915_AIF_CLOCKING_1, - WM8915_SYSCLK_ENA, old); - - wm8915->sysclk_src = clk_id; - - return 0; -} - -struct _fll_div { - u16 fll_fratio; - u16 fll_outdiv; - u16 fll_refclk_div; - u16 fll_loop_gain; - u16 fll_ref_freq; - u16 n; - u16 theta; - u16 lambda; -}; - -static struct { - unsigned int min; - unsigned int max; - u16 fll_fratio; - int ratio; -} fll_fratios[] = { - { 0, 64000, 4, 16 }, - { 64000, 128000, 3, 8 }, - { 128000, 256000, 2, 4 }, - { 256000, 1000000, 1, 2 }, - { 1000000, 13500000, 0, 1 }, -}; - -static int fll_factors(struct _fll_div *fll_div, unsigned int Fref, - unsigned int Fout) -{ - unsigned int target; - unsigned int div; - unsigned int fratio, gcd_fll; - int i; - - /* Fref must be <=13.5MHz */ - div = 1; - fll_div->fll_refclk_div = 0; - while ((Fref / div) > 13500000) { - div *= 2; - fll_div->fll_refclk_div++; - - if (div > 8) { - pr_err("Can't scale %dMHz input down to <=13.5MHz\n", - Fref); - return -EINVAL; - } - } - - pr_debug("FLL Fref=%u Fout=%u\n", Fref, Fout); - - /* Apply the division for our remaining calculations */ - Fref /= div; - - if (Fref >= 3000000) - fll_div->fll_loop_gain = 5; - else - fll_div->fll_loop_gain = 0; - - if (Fref >= 48000) - fll_div->fll_ref_freq = 0; - else - fll_div->fll_ref_freq = 1; - - /* Fvco should be 90-100MHz; don't check the upper bound */ - div = 2; - while (Fout * div < 90000000) { - div++; - if (div > 64) { - pr_err("Unable to find FLL_OUTDIV for Fout=%uHz\n", - Fout); - return -EINVAL; - } - } - target = Fout * div; - fll_div->fll_outdiv = div - 1; - - pr_debug("FLL Fvco=%dHz\n", target); - - /* Find an appropraite FLL_FRATIO and factor it out of the target */ - for (i = 0; i < ARRAY_SIZE(fll_fratios); i++) { - if (fll_fratios[i].min <= Fref && Fref <= fll_fratios[i].max) { - fll_div->fll_fratio = fll_fratios[i].fll_fratio; - fratio = fll_fratios[i].ratio; - break; - } - } - if (i == ARRAY_SIZE(fll_fratios)) { - pr_err("Unable to find FLL_FRATIO for Fref=%uHz\n", Fref); - return -EINVAL; - } - - fll_div->n = target / (fratio * Fref); - - if (target % Fref == 0) { - fll_div->theta = 0; - fll_div->lambda = 0; - } else { - gcd_fll = gcd(target, fratio * Fref); - - fll_div->theta = (target - (fll_div->n * fratio * Fref)) - / gcd_fll; - fll_div->lambda = (fratio * Fref) / gcd_fll; - } - - pr_debug("FLL N=%x THETA=%x LAMBDA=%x\n", - fll_div->n, fll_div->theta, fll_div->lambda); - pr_debug("FLL_FRATIO=%x FLL_OUTDIV=%x FLL_REFCLK_DIV=%x\n", - fll_div->fll_fratio, fll_div->fll_outdiv, - fll_div->fll_refclk_div); - - return 0; -} - -static int wm8915_set_fll(struct snd_soc_codec *codec, int fll_id, int source, - unsigned int Fref, unsigned int Fout) -{ - struct wm8915_priv *wm8915 = snd_soc_codec_get_drvdata(codec); - struct i2c_client *i2c = to_i2c_client(codec->dev); - struct _fll_div fll_div; - unsigned long timeout; - int ret, reg; - - /* Any change? */ - if (source == wm8915->fll_src && Fref == wm8915->fll_fref && - Fout == wm8915->fll_fout) - return 0; - - if (Fout == 0) { - dev_dbg(codec->dev, "FLL disabled\n"); - - wm8915->fll_fref = 0; - wm8915->fll_fout = 0; - - snd_soc_update_bits(codec, WM8915_FLL_CONTROL_1, - WM8915_FLL_ENA, 0); - - return 0; - } - - ret = fll_factors(&fll_div, Fref, Fout); - if (ret != 0) - return ret; - - switch (source) { - case WM8915_FLL_MCLK1: - reg = 0; - break; - case WM8915_FLL_MCLK2: - reg = 1; - break; - case WM8915_FLL_DACLRCLK1: - reg = 2; - break; - case WM8915_FLL_BCLK1: - reg = 3; - break; - default: - dev_err(codec->dev, "Unknown FLL source %d\n", ret); - return -EINVAL; - } - - reg |= fll_div.fll_refclk_div << WM8915_FLL_REFCLK_DIV_SHIFT; - reg |= fll_div.fll_ref_freq << WM8915_FLL_REF_FREQ_SHIFT; - - snd_soc_update_bits(codec, WM8915_FLL_CONTROL_5, - WM8915_FLL_REFCLK_DIV_MASK | WM8915_FLL_REF_FREQ | - WM8915_FLL_REFCLK_SRC_MASK, reg); - - reg = 0; - if (fll_div.theta || fll_div.lambda) - reg |= WM8915_FLL_EFS_ENA | (3 << WM8915_FLL_LFSR_SEL_SHIFT); - else - reg |= 1 << WM8915_FLL_LFSR_SEL_SHIFT; - snd_soc_write(codec, WM8915_FLL_EFS_2, reg); - - snd_soc_update_bits(codec, WM8915_FLL_CONTROL_2, - WM8915_FLL_OUTDIV_MASK | - WM8915_FLL_FRATIO_MASK, - (fll_div.fll_outdiv << WM8915_FLL_OUTDIV_SHIFT) | - (fll_div.fll_fratio)); - - snd_soc_write(codec, WM8915_FLL_CONTROL_3, fll_div.theta); - - snd_soc_update_bits(codec, WM8915_FLL_CONTROL_4, - WM8915_FLL_N_MASK | WM8915_FLL_LOOP_GAIN_MASK, - (fll_div.n << WM8915_FLL_N_SHIFT) | - fll_div.fll_loop_gain); - - snd_soc_write(codec, WM8915_FLL_EFS_1, fll_div.lambda); - - snd_soc_update_bits(codec, WM8915_FLL_CONTROL_1, - WM8915_FLL_ENA, WM8915_FLL_ENA); - - /* The FLL supports live reconfiguration - kick that in case we were - * already enabled. - */ - snd_soc_write(codec, WM8915_FLL_CONTROL_6, WM8915_FLL_SWITCH_CLK); - - /* Wait for the FLL to lock, using the interrupt if possible */ - if (Fref > 1000000) - timeout = usecs_to_jiffies(300); - else - timeout = msecs_to_jiffies(2); - - /* Allow substantially longer if we've actually got the IRQ */ - if (i2c->irq) - timeout *= 1000; - - ret = wait_for_completion_timeout(&wm8915->fll_lock, timeout); - - if (ret == 0 && i2c->irq) { - dev_err(codec->dev, "Timed out waiting for FLL\n"); - ret = -ETIMEDOUT; - } else { - ret = 0; - } - - dev_dbg(codec->dev, "FLL configured for %dHz->%dHz\n", Fref, Fout); - - wm8915->fll_fref = Fref; - wm8915->fll_fout = Fout; - wm8915->fll_src = source; - - return ret; -} - -#ifdef CONFIG_GPIOLIB -static inline struct wm8915_priv *gpio_to_wm8915(struct gpio_chip *chip) -{ - return container_of(chip, struct wm8915_priv, gpio_chip); -} - -static void wm8915_gpio_set(struct gpio_chip *chip, unsigned offset, int value) -{ - struct wm8915_priv *wm8915 = gpio_to_wm8915(chip); - struct snd_soc_codec *codec = wm8915->codec; - - snd_soc_update_bits(codec, WM8915_GPIO_1 + offset, - WM8915_GP1_LVL, !!value << WM8915_GP1_LVL_SHIFT); -} - -static int wm8915_gpio_direction_out(struct gpio_chip *chip, - unsigned offset, int value) -{ - struct wm8915_priv *wm8915 = gpio_to_wm8915(chip); - struct snd_soc_codec *codec = wm8915->codec; - int val; - - val = (1 << WM8915_GP1_FN_SHIFT) | (!!value << WM8915_GP1_LVL_SHIFT); - - return snd_soc_update_bits(codec, WM8915_GPIO_1 + offset, - WM8915_GP1_FN_MASK | WM8915_GP1_DIR | - WM8915_GP1_LVL, val); -} - -static int wm8915_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - struct wm8915_priv *wm8915 = gpio_to_wm8915(chip); - struct snd_soc_codec *codec = wm8915->codec; - int ret; - - ret = snd_soc_read(codec, WM8915_GPIO_1 + offset); - if (ret < 0) - return ret; - - return (ret & WM8915_GP1_LVL) != 0; -} - -static int wm8915_gpio_direction_in(struct gpio_chip *chip, unsigned offset) -{ - struct wm8915_priv *wm8915 = gpio_to_wm8915(chip); - struct snd_soc_codec *codec = wm8915->codec; - - return snd_soc_update_bits(codec, WM8915_GPIO_1 + offset, - WM8915_GP1_FN_MASK | WM8915_GP1_DIR, - (1 << WM8915_GP1_FN_SHIFT) | - (1 << WM8915_GP1_DIR_SHIFT)); -} - -static struct gpio_chip wm8915_template_chip = { - .label = "wm8915", - .owner = THIS_MODULE, - .direction_output = wm8915_gpio_direction_out, - .set = wm8915_gpio_set, - .direction_input = wm8915_gpio_direction_in, - .get = wm8915_gpio_get, - .can_sleep = 1, -}; - -static void wm8915_init_gpio(struct snd_soc_codec *codec) -{ - struct wm8915_priv *wm8915 = snd_soc_codec_get_drvdata(codec); - int ret; - - wm8915->gpio_chip = wm8915_template_chip; - wm8915->gpio_chip.ngpio = 5; - wm8915->gpio_chip.dev = codec->dev; - - if (wm8915->pdata.gpio_base) - wm8915->gpio_chip.base = wm8915->pdata.gpio_base; - else - wm8915->gpio_chip.base = -1; - - ret = gpiochip_add(&wm8915->gpio_chip); - if (ret != 0) - dev_err(codec->dev, "Failed to add GPIOs: %d\n", ret); -} - -static void wm8915_free_gpio(struct snd_soc_codec *codec) -{ - struct wm8915_priv *wm8915 = snd_soc_codec_get_drvdata(codec); - int ret; - - ret = gpiochip_remove(&wm8915->gpio_chip); - if (ret != 0) - dev_err(codec->dev, "Failed to remove GPIOs: %d\n", ret); -} -#else -static void wm8915_init_gpio(struct snd_soc_codec *codec) -{ -} - -static void wm8915_free_gpio(struct snd_soc_codec *codec) -{ -} -#endif - -/** - * wm8915_detect - Enable default WM8915 jack detection - * - * The WM8915 has advanced accessory detection support for headsets. - * This function provides a default implementation which integrates - * the majority of this functionality with minimal user configuration. - * - * This will detect headset, headphone and short circuit button and - * will also detect inverted microphone ground connections and update - * the polarity of the connections. - */ -int wm8915_detect(struct snd_soc_codec *codec, struct snd_soc_jack *jack, - wm8915_polarity_fn polarity_cb) -{ - struct wm8915_priv *wm8915 = snd_soc_codec_get_drvdata(codec); - - wm8915->jack = jack; - wm8915->detecting = true; - wm8915->polarity_cb = polarity_cb; - - if (wm8915->polarity_cb) - wm8915->polarity_cb(codec, 0); - - /* Clear discarge to avoid noise during detection */ - snd_soc_update_bits(codec, WM8915_MICBIAS_1, - WM8915_MICB1_DISCH, 0); - snd_soc_update_bits(codec, WM8915_MICBIAS_2, - WM8915_MICB2_DISCH, 0); - - /* LDO2 powers the microphones, SYSCLK clocks detection */ - snd_soc_dapm_force_enable_pin(&codec->dapm, "LDO2"); - snd_soc_dapm_force_enable_pin(&codec->dapm, "SYSCLK"); - - /* We start off just enabling microphone detection - even a - * plain headphone will trigger detection. - */ - snd_soc_update_bits(codec, WM8915_MIC_DETECT_1, - WM8915_MICD_ENA, WM8915_MICD_ENA); - - /* Slowest detection rate, gives debounce for initial detection */ - snd_soc_update_bits(codec, WM8915_MIC_DETECT_1, - WM8915_MICD_RATE_MASK, - WM8915_MICD_RATE_MASK); - - /* Enable interrupts and we're off */ - snd_soc_update_bits(codec, WM8915_INTERRUPT_STATUS_2_MASK, - WM8915_IM_MICD_EINT, 0); - - return 0; -} -EXPORT_SYMBOL_GPL(wm8915_detect); - -static void wm8915_micd(struct snd_soc_codec *codec) -{ - struct wm8915_priv *wm8915 = snd_soc_codec_get_drvdata(codec); - int val, reg; - - val = snd_soc_read(codec, WM8915_MIC_DETECT_3); - - dev_dbg(codec->dev, "Microphone event: %x\n", val); - - if (!(val & WM8915_MICD_VALID)) { - dev_warn(codec->dev, "Microphone detection state invalid\n"); - return; - } - - /* No accessory, reset everything and report removal */ - if (!(val & WM8915_MICD_STS)) { - dev_dbg(codec->dev, "Jack removal detected\n"); - wm8915->jack_mic = false; - wm8915->detecting = true; - snd_soc_jack_report(wm8915->jack, 0, - SND_JACK_HEADSET | SND_JACK_BTN_0); - snd_soc_update_bits(codec, WM8915_MIC_DETECT_1, - WM8915_MICD_RATE_MASK, - WM8915_MICD_RATE_MASK); - return; - } - - /* If the measurement is very high we've got a microphone but - * do a little debounce to account for mechanical issues. - */ - if (val & 0x400) { - dev_dbg(codec->dev, "Microphone detected\n"); - snd_soc_jack_report(wm8915->jack, SND_JACK_HEADSET, - SND_JACK_HEADSET | SND_JACK_BTN_0); - wm8915->jack_mic = true; - wm8915->detecting = false; - - /* Increase poll rate to give better responsiveness - * for buttons */ - snd_soc_update_bits(codec, WM8915_MIC_DETECT_1, - WM8915_MICD_RATE_MASK, - 5 << WM8915_MICD_RATE_SHIFT); - } - - /* If we detected a lower impedence during initial startup - * then we probably have the wrong polarity, flip it. Don't - * do this for the lowest impedences to speed up detection of - * plain headphones. - */ - if (wm8915->detecting && (val & 0x3f0)) { - reg = snd_soc_read(codec, WM8915_ACCESSORY_DETECT_MODE_2); - reg ^= WM8915_HPOUT1FB_SRC | WM8915_MICD_SRC | - WM8915_MICD_BIAS_SRC; - snd_soc_update_bits(codec, WM8915_ACCESSORY_DETECT_MODE_2, - WM8915_HPOUT1FB_SRC | WM8915_MICD_SRC | - WM8915_MICD_BIAS_SRC, reg); - - if (wm8915->polarity_cb) - wm8915->polarity_cb(codec, - (reg & WM8915_MICD_SRC) != 0); - - dev_dbg(codec->dev, "Set microphone polarity to %d\n", - (reg & WM8915_MICD_SRC) != 0); - - return; - } - - /* Don't distinguish between buttons, just report any low - * impedence as BTN_0. - */ - if (val & 0x3fc) { - if (wm8915->jack_mic) { - dev_dbg(codec->dev, "Mic button detected\n"); - snd_soc_jack_report(wm8915->jack, - SND_JACK_HEADSET | SND_JACK_BTN_0, - SND_JACK_HEADSET | SND_JACK_BTN_0); - } else { - dev_dbg(codec->dev, "Headphone detected\n"); - snd_soc_jack_report(wm8915->jack, - SND_JACK_HEADPHONE, - SND_JACK_HEADSET | - SND_JACK_BTN_0); - - /* Increase the detection rate a bit for - * responsiveness. - */ - snd_soc_update_bits(codec, WM8915_MIC_DETECT_1, - WM8915_MICD_RATE_MASK, - 7 << WM8915_MICD_RATE_SHIFT); - - wm8915->detecting = false; - } - } -} - -static irqreturn_t wm8915_irq(int irq, void *data) -{ - struct snd_soc_codec *codec = data; - struct wm8915_priv *wm8915 = snd_soc_codec_get_drvdata(codec); - int irq_val; - - irq_val = snd_soc_read(codec, WM8915_INTERRUPT_STATUS_2); - if (irq_val < 0) { - dev_err(codec->dev, "Failed to read IRQ status: %d\n", - irq_val); - return IRQ_NONE; - } - irq_val &= ~snd_soc_read(codec, WM8915_INTERRUPT_STATUS_2_MASK); - - if (irq_val & (WM8915_DCS_DONE_01_EINT | WM8915_DCS_DONE_23_EINT)) { - dev_dbg(codec->dev, "DC servo IRQ\n"); - complete(&wm8915->dcs_done); - } - - if (irq_val & WM8915_FIFOS_ERR_EINT) - dev_err(codec->dev, "Digital core FIFO error\n"); - - if (irq_val & WM8915_FLL_LOCK_EINT) { - dev_dbg(codec->dev, "FLL locked\n"); - complete(&wm8915->fll_lock); - } - - if (irq_val & WM8915_MICD_EINT) - wm8915_micd(codec); - - if (irq_val) { - snd_soc_write(codec, WM8915_INTERRUPT_STATUS_2, irq_val); - - return IRQ_HANDLED; - } else { - return IRQ_NONE; - } -} - -static irqreturn_t wm8915_edge_irq(int irq, void *data) -{ - irqreturn_t ret = IRQ_NONE; - irqreturn_t val; - - do { - val = wm8915_irq(irq, data); - if (val != IRQ_NONE) - ret = val; - } while (val != IRQ_NONE); - - return ret; -} - -static void wm8915_retune_mobile_pdata(struct snd_soc_codec *codec) -{ - struct wm8915_priv *wm8915 = snd_soc_codec_get_drvdata(codec); - struct wm8915_pdata *pdata = &wm8915->pdata; - - struct snd_kcontrol_new controls[] = { - SOC_ENUM_EXT("DSP1 EQ Mode", - wm8915->retune_mobile_enum, - wm8915_get_retune_mobile_enum, - wm8915_put_retune_mobile_enum), - SOC_ENUM_EXT("DSP2 EQ Mode", - wm8915->retune_mobile_enum, - wm8915_get_retune_mobile_enum, - wm8915_put_retune_mobile_enum), - }; - int ret, i, j; - const char **t; - - /* We need an array of texts for the enum API but the number - * of texts is likely to be less than the number of - * configurations due to the sample rate dependency of the - * configurations. */ - wm8915->num_retune_mobile_texts = 0; - wm8915->retune_mobile_texts = NULL; - for (i = 0; i < pdata->num_retune_mobile_cfgs; i++) { - for (j = 0; j < wm8915->num_retune_mobile_texts; j++) { - if (strcmp(pdata->retune_mobile_cfgs[i].name, - wm8915->retune_mobile_texts[j]) == 0) - break; - } - - if (j != wm8915->num_retune_mobile_texts) - continue; - - /* Expand the array... */ - t = krealloc(wm8915->retune_mobile_texts, - sizeof(char *) * - (wm8915->num_retune_mobile_texts + 1), - GFP_KERNEL); - if (t == NULL) - continue; - - /* ...store the new entry... */ - t[wm8915->num_retune_mobile_texts] = - pdata->retune_mobile_cfgs[i].name; - - /* ...and remember the new version. */ - wm8915->num_retune_mobile_texts++; - wm8915->retune_mobile_texts = t; - } - - dev_dbg(codec->dev, "Allocated %d unique ReTune Mobile names\n", - wm8915->num_retune_mobile_texts); - - wm8915->retune_mobile_enum.max = wm8915->num_retune_mobile_texts; - wm8915->retune_mobile_enum.texts = wm8915->retune_mobile_texts; - - ret = snd_soc_add_controls(codec, controls, ARRAY_SIZE(controls)); - if (ret != 0) - dev_err(codec->dev, - "Failed to add ReTune Mobile controls: %d\n", ret); -} - -static int wm8915_probe(struct snd_soc_codec *codec) -{ - int ret; - struct wm8915_priv *wm8915 = snd_soc_codec_get_drvdata(codec); - struct i2c_client *i2c = to_i2c_client(codec->dev); - struct snd_soc_dapm_context *dapm = &codec->dapm; - int i, irq_flags; - - wm8915->codec = codec; - - init_completion(&wm8915->dcs_done); - init_completion(&wm8915->fll_lock); - - dapm->idle_bias_off = true; - dapm->bias_level = SND_SOC_BIAS_OFF; - - ret = snd_soc_codec_set_cache_io(codec, 16, 16, SND_SOC_I2C); - if (ret != 0) { - dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret); - goto err; - } - - for (i = 0; i < ARRAY_SIZE(wm8915->supplies); i++) - wm8915->supplies[i].supply = wm8915_supply_names[i]; - - ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(wm8915->supplies), - wm8915->supplies); - if (ret != 0) { - dev_err(codec->dev, "Failed to request supplies: %d\n", ret); - goto err; - } - - wm8915->disable_nb[0].notifier_call = wm8915_regulator_event_0; - wm8915->disable_nb[1].notifier_call = wm8915_regulator_event_1; - wm8915->disable_nb[2].notifier_call = wm8915_regulator_event_2; - wm8915->disable_nb[3].notifier_call = wm8915_regulator_event_3; - - /* This should really be moved into the regulator core */ - for (i = 0; i < ARRAY_SIZE(wm8915->supplies); i++) { - ret = regulator_register_notifier(wm8915->supplies[i].consumer, - &wm8915->disable_nb[i]); - if (ret != 0) { - dev_err(codec->dev, - "Failed to register regulator notifier: %d\n", - ret); - } - } - - ret = regulator_bulk_enable(ARRAY_SIZE(wm8915->supplies), - wm8915->supplies); - if (ret != 0) { - dev_err(codec->dev, "Failed to enable supplies: %d\n", ret); - goto err_get; - } - - if (wm8915->pdata.ldo_ena >= 0) { - gpio_set_value_cansleep(wm8915->pdata.ldo_ena, 1); - msleep(5); - } - - ret = snd_soc_read(codec, WM8915_SOFTWARE_RESET); - if (ret < 0) { - dev_err(codec->dev, "Failed to read ID register: %d\n", ret); - goto err_enable; - } - if (ret != 0x8915) { - dev_err(codec->dev, "Device is not a WM8915, ID %x\n", ret); - ret = -EINVAL; - goto err_enable; - } - - ret = snd_soc_read(codec, WM8915_CHIP_REVISION); - if (ret < 0) { - dev_err(codec->dev, "Failed to read device revision: %d\n", - ret); - goto err_enable; - } - - dev_info(codec->dev, "revision %c\n", - (ret & WM8915_CHIP_REV_MASK) + 'A'); - - if (wm8915->pdata.ldo_ena >= 0) { - gpio_set_value_cansleep(wm8915->pdata.ldo_ena, 0); - } else { - ret = wm8915_reset(codec); - if (ret < 0) { - dev_err(codec->dev, "Failed to issue reset\n"); - goto err_enable; - } - } - - codec->cache_only = true; - - /* Apply platform data settings */ - snd_soc_update_bits(codec, WM8915_LINE_INPUT_CONTROL, - WM8915_INL_MODE_MASK | WM8915_INR_MODE_MASK, - wm8915->pdata.inl_mode << WM8915_INL_MODE_SHIFT | - wm8915->pdata.inr_mode); - - for (i = 0; i < ARRAY_SIZE(wm8915->pdata.gpio_default); i++) { - if (!wm8915->pdata.gpio_default[i]) - continue; - - snd_soc_write(codec, WM8915_GPIO_1 + i, - wm8915->pdata.gpio_default[i] & 0xffff); - } - - if (wm8915->pdata.spkmute_seq) - snd_soc_update_bits(codec, WM8915_PDM_SPEAKER_MUTE_SEQUENCE, - WM8915_SPK_MUTE_ENDIAN | - WM8915_SPK_MUTE_SEQ1_MASK, - wm8915->pdata.spkmute_seq); - - snd_soc_update_bits(codec, WM8915_ACCESSORY_DETECT_MODE_2, - WM8915_MICD_BIAS_SRC | WM8915_HPOUT1FB_SRC | - WM8915_MICD_SRC, wm8915->pdata.micdet_def); - - /* Latch volume update bits */ - snd_soc_update_bits(codec, WM8915_LEFT_LINE_INPUT_VOLUME, - WM8915_IN1_VU, WM8915_IN1_VU); - snd_soc_update_bits(codec, WM8915_RIGHT_LINE_INPUT_VOLUME, - WM8915_IN1_VU, WM8915_IN1_VU); - - snd_soc_update_bits(codec, WM8915_DAC1_LEFT_VOLUME, - WM8915_DAC1_VU, WM8915_DAC1_VU); - snd_soc_update_bits(codec, WM8915_DAC1_RIGHT_VOLUME, - WM8915_DAC1_VU, WM8915_DAC1_VU); - snd_soc_update_bits(codec, WM8915_DAC2_LEFT_VOLUME, - WM8915_DAC2_VU, WM8915_DAC2_VU); - snd_soc_update_bits(codec, WM8915_DAC2_RIGHT_VOLUME, - WM8915_DAC2_VU, WM8915_DAC2_VU); - - snd_soc_update_bits(codec, WM8915_OUTPUT1_LEFT_VOLUME, - WM8915_DAC1_VU, WM8915_DAC1_VU); - snd_soc_update_bits(codec, WM8915_OUTPUT1_RIGHT_VOLUME, - WM8915_DAC1_VU, WM8915_DAC1_VU); - snd_soc_update_bits(codec, WM8915_OUTPUT2_LEFT_VOLUME, - WM8915_DAC2_VU, WM8915_DAC2_VU); - snd_soc_update_bits(codec, WM8915_OUTPUT2_RIGHT_VOLUME, - WM8915_DAC2_VU, WM8915_DAC2_VU); - - snd_soc_update_bits(codec, WM8915_DSP1_TX_LEFT_VOLUME, - WM8915_DSP1TX_VU, WM8915_DSP1TX_VU); - snd_soc_update_bits(codec, WM8915_DSP1_TX_RIGHT_VOLUME, - WM8915_DSP1TX_VU, WM8915_DSP1TX_VU); - snd_soc_update_bits(codec, WM8915_DSP2_TX_LEFT_VOLUME, - WM8915_DSP2TX_VU, WM8915_DSP2TX_VU); - snd_soc_update_bits(codec, WM8915_DSP2_TX_RIGHT_VOLUME, - WM8915_DSP2TX_VU, WM8915_DSP2TX_VU); - - snd_soc_update_bits(codec, WM8915_DSP1_RX_LEFT_VOLUME, - WM8915_DSP1RX_VU, WM8915_DSP1RX_VU); - snd_soc_update_bits(codec, WM8915_DSP1_RX_RIGHT_VOLUME, - WM8915_DSP1RX_VU, WM8915_DSP1RX_VU); - snd_soc_update_bits(codec, WM8915_DSP2_RX_LEFT_VOLUME, - WM8915_DSP2RX_VU, WM8915_DSP2RX_VU); - snd_soc_update_bits(codec, WM8915_DSP2_RX_RIGHT_VOLUME, - WM8915_DSP2RX_VU, WM8915_DSP2RX_VU); - - /* No support currently for the underclocked TDM modes and - * pick a default TDM layout with each channel pair working with - * slots 0 and 1. */ - snd_soc_update_bits(codec, WM8915_AIF1RX_CHANNEL_0_CONFIGURATION, - WM8915_AIF1RX_CHAN0_SLOTS_MASK | - WM8915_AIF1RX_CHAN0_START_SLOT_MASK, - 1 << WM8915_AIF1RX_CHAN0_SLOTS_SHIFT | 0); - snd_soc_update_bits(codec, WM8915_AIF1RX_CHANNEL_1_CONFIGURATION, - WM8915_AIF1RX_CHAN1_SLOTS_MASK | - WM8915_AIF1RX_CHAN1_START_SLOT_MASK, - 1 << WM8915_AIF1RX_CHAN1_SLOTS_SHIFT | 1); - snd_soc_update_bits(codec, WM8915_AIF1RX_CHANNEL_2_CONFIGURATION, - WM8915_AIF1RX_CHAN2_SLOTS_MASK | - WM8915_AIF1RX_CHAN2_START_SLOT_MASK, - 1 << WM8915_AIF1RX_CHAN2_SLOTS_SHIFT | 0); - snd_soc_update_bits(codec, WM8915_AIF1RX_CHANNEL_3_CONFIGURATION, - WM8915_AIF1RX_CHAN3_SLOTS_MASK | - WM8915_AIF1RX_CHAN0_START_SLOT_MASK, - 1 << WM8915_AIF1RX_CHAN3_SLOTS_SHIFT | 1); - snd_soc_update_bits(codec, WM8915_AIF1RX_CHANNEL_4_CONFIGURATION, - WM8915_AIF1RX_CHAN4_SLOTS_MASK | - WM8915_AIF1RX_CHAN0_START_SLOT_MASK, - 1 << WM8915_AIF1RX_CHAN4_SLOTS_SHIFT | 0); - snd_soc_update_bits(codec, WM8915_AIF1RX_CHANNEL_5_CONFIGURATION, - WM8915_AIF1RX_CHAN5_SLOTS_MASK | - WM8915_AIF1RX_CHAN0_START_SLOT_MASK, - 1 << WM8915_AIF1RX_CHAN5_SLOTS_SHIFT | 1); - - snd_soc_update_bits(codec, WM8915_AIF2RX_CHANNEL_0_CONFIGURATION, - WM8915_AIF2RX_CHAN0_SLOTS_MASK | - WM8915_AIF2RX_CHAN0_START_SLOT_MASK, - 1 << WM8915_AIF2RX_CHAN0_SLOTS_SHIFT | 0); - snd_soc_update_bits(codec, WM8915_AIF2RX_CHANNEL_1_CONFIGURATION, - WM8915_AIF2RX_CHAN1_SLOTS_MASK | - WM8915_AIF2RX_CHAN1_START_SLOT_MASK, - 1 << WM8915_AIF2RX_CHAN1_SLOTS_SHIFT | 1); - - snd_soc_update_bits(codec, WM8915_AIF1TX_CHANNEL_0_CONFIGURATION, - WM8915_AIF1TX_CHAN0_SLOTS_MASK | - WM8915_AIF1TX_CHAN0_START_SLOT_MASK, - 1 << WM8915_AIF1TX_CHAN0_SLOTS_SHIFT | 0); - snd_soc_update_bits(codec, WM8915_AIF1TX_CHANNEL_1_CONFIGURATION, - WM8915_AIF1TX_CHAN1_SLOTS_MASK | - WM8915_AIF1TX_CHAN0_START_SLOT_MASK, - 1 << WM8915_AIF1TX_CHAN1_SLOTS_SHIFT | 1); - snd_soc_update_bits(codec, WM8915_AIF1TX_CHANNEL_2_CONFIGURATION, - WM8915_AIF1TX_CHAN2_SLOTS_MASK | - WM8915_AIF1TX_CHAN0_START_SLOT_MASK, - 1 << WM8915_AIF1TX_CHAN2_SLOTS_SHIFT | 0); - snd_soc_update_bits(codec, WM8915_AIF1TX_CHANNEL_3_CONFIGURATION, - WM8915_AIF1TX_CHAN3_SLOTS_MASK | - WM8915_AIF1TX_CHAN0_START_SLOT_MASK, - 1 << WM8915_AIF1TX_CHAN3_SLOTS_SHIFT | 1); - snd_soc_update_bits(codec, WM8915_AIF1TX_CHANNEL_4_CONFIGURATION, - WM8915_AIF1TX_CHAN4_SLOTS_MASK | - WM8915_AIF1TX_CHAN0_START_SLOT_MASK, - 1 << WM8915_AIF1TX_CHAN4_SLOTS_SHIFT | 0); - snd_soc_update_bits(codec, WM8915_AIF1TX_CHANNEL_5_CONFIGURATION, - WM8915_AIF1TX_CHAN5_SLOTS_MASK | - WM8915_AIF1TX_CHAN0_START_SLOT_MASK, - 1 << WM8915_AIF1TX_CHAN5_SLOTS_SHIFT | 1); - - snd_soc_update_bits(codec, WM8915_AIF2TX_CHANNEL_0_CONFIGURATION, - WM8915_AIF2TX_CHAN0_SLOTS_MASK | - WM8915_AIF2TX_CHAN0_START_SLOT_MASK, - 1 << WM8915_AIF2TX_CHAN0_SLOTS_SHIFT | 0); - snd_soc_update_bits(codec, WM8915_AIF1TX_CHANNEL_1_CONFIGURATION, - WM8915_AIF2TX_CHAN1_SLOTS_MASK | - WM8915_AIF2TX_CHAN1_START_SLOT_MASK, - 1 << WM8915_AIF1TX_CHAN1_SLOTS_SHIFT | 1); - - if (wm8915->pdata.num_retune_mobile_cfgs) - wm8915_retune_mobile_pdata(codec); - else - snd_soc_add_controls(codec, wm8915_eq_controls, - ARRAY_SIZE(wm8915_eq_controls)); - - /* If the TX LRCLK pins are not in LRCLK mode configure the - * AIFs to source their clocks from the RX LRCLKs. - */ - if ((snd_soc_read(codec, WM8915_GPIO_1))) - snd_soc_update_bits(codec, WM8915_AIF1_TX_LRCLK_2, - WM8915_AIF1TX_LRCLK_MODE, - WM8915_AIF1TX_LRCLK_MODE); - - if ((snd_soc_read(codec, WM8915_GPIO_2))) - snd_soc_update_bits(codec, WM8915_AIF2_TX_LRCLK_2, - WM8915_AIF2TX_LRCLK_MODE, - WM8915_AIF2TX_LRCLK_MODE); - - regulator_bulk_disable(ARRAY_SIZE(wm8915->supplies), wm8915->supplies); - - wm8915_init_gpio(codec); - - if (i2c->irq) { - if (wm8915->pdata.irq_flags) - irq_flags = wm8915->pdata.irq_flags; - else - irq_flags = IRQF_TRIGGER_LOW; - - irq_flags |= IRQF_ONESHOT; - - if (irq_flags & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) - ret = request_threaded_irq(i2c->irq, NULL, - wm8915_edge_irq, - irq_flags, "wm8915", codec); - else - ret = request_threaded_irq(i2c->irq, NULL, wm8915_irq, - irq_flags, "wm8915", codec); - - if (ret == 0) { - /* Unmask the interrupt */ - snd_soc_update_bits(codec, WM8915_INTERRUPT_CONTROL, - WM8915_IM_IRQ, 0); - - /* Enable error reporting and DC servo status */ - snd_soc_update_bits(codec, - WM8915_INTERRUPT_STATUS_2_MASK, - WM8915_IM_DCS_DONE_23_EINT | - WM8915_IM_DCS_DONE_01_EINT | - WM8915_IM_FLL_LOCK_EINT | - WM8915_IM_FIFOS_ERR_EINT, - 0); - } else { - dev_err(codec->dev, "Failed to request IRQ: %d\n", - ret); - } - } - - return 0; - -err_enable: - if (wm8915->pdata.ldo_ena >= 0) - gpio_set_value_cansleep(wm8915->pdata.ldo_ena, 0); - - regulator_bulk_disable(ARRAY_SIZE(wm8915->supplies), wm8915->supplies); -err_get: - regulator_bulk_free(ARRAY_SIZE(wm8915->supplies), wm8915->supplies); -err: - return ret; -} - -static int wm8915_remove(struct snd_soc_codec *codec) -{ - struct wm8915_priv *wm8915 = snd_soc_codec_get_drvdata(codec); - struct i2c_client *i2c = to_i2c_client(codec->dev); - int i; - - snd_soc_update_bits(codec, WM8915_INTERRUPT_CONTROL, - WM8915_IM_IRQ, WM8915_IM_IRQ); - - if (i2c->irq) - free_irq(i2c->irq, codec); - - wm8915_free_gpio(codec); - - for (i = 0; i < ARRAY_SIZE(wm8915->supplies); i++) - regulator_unregister_notifier(wm8915->supplies[i].consumer, - &wm8915->disable_nb[i]); - regulator_bulk_free(ARRAY_SIZE(wm8915->supplies), wm8915->supplies); - - return 0; -} - -static struct snd_soc_codec_driver soc_codec_dev_wm8915 = { - .probe = wm8915_probe, - .remove = wm8915_remove, - .set_bias_level = wm8915_set_bias_level, - .seq_notifier = wm8915_seq_notifier, - .reg_cache_size = WM8915_MAX_REGISTER + 1, - .reg_word_size = sizeof(u16), - .reg_cache_default = wm8915_reg, - .volatile_register = wm8915_volatile_register, - .readable_register = wm8915_readable_register, - .compress_type = SND_SOC_RBTREE_COMPRESSION, - .controls = wm8915_snd_controls, - .num_controls = ARRAY_SIZE(wm8915_snd_controls), - .dapm_widgets = wm8915_dapm_widgets, - .num_dapm_widgets = ARRAY_SIZE(wm8915_dapm_widgets), - .dapm_routes = wm8915_dapm_routes, - .num_dapm_routes = ARRAY_SIZE(wm8915_dapm_routes), - .set_pll = wm8915_set_fll, -}; - -#define WM8915_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |\ - SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_48000) -#define WM8915_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE |\ - SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S24_LE |\ - SNDRV_PCM_FMTBIT_S32_LE) - -static struct snd_soc_dai_ops wm8915_dai_ops = { - .set_fmt = wm8915_set_fmt, - .hw_params = wm8915_hw_params, - .set_sysclk = wm8915_set_sysclk, -}; - -static struct snd_soc_dai_driver wm8915_dai[] = { - { - .name = "wm8915-aif1", - .playback = { - .stream_name = "AIF1 Playback", - .channels_min = 1, - .channels_max = 6, - .rates = WM8915_RATES, - .formats = WM8915_FORMATS, - }, - .capture = { - .stream_name = "AIF1 Capture", - .channels_min = 1, - .channels_max = 6, - .rates = WM8915_RATES, - .formats = WM8915_FORMATS, - }, - .ops = &wm8915_dai_ops, - }, - { - .name = "wm8915-aif2", - .playback = { - .stream_name = "AIF2 Playback", - .channels_min = 1, - .channels_max = 2, - .rates = WM8915_RATES, - .formats = WM8915_FORMATS, - }, - .capture = { - .stream_name = "AIF2 Capture", - .channels_min = 1, - .channels_max = 2, - .rates = WM8915_RATES, - .formats = WM8915_FORMATS, - }, - .ops = &wm8915_dai_ops, - }, -}; - -static __devinit int wm8915_i2c_probe(struct i2c_client *i2c, - const struct i2c_device_id *id) -{ - struct wm8915_priv *wm8915; - int ret; - - wm8915 = kzalloc(sizeof(struct wm8915_priv), GFP_KERNEL); - if (wm8915 == NULL) - return -ENOMEM; - - i2c_set_clientdata(i2c, wm8915); - - if (dev_get_platdata(&i2c->dev)) - memcpy(&wm8915->pdata, dev_get_platdata(&i2c->dev), - sizeof(wm8915->pdata)); - - if (wm8915->pdata.ldo_ena > 0) { - ret = gpio_request_one(wm8915->pdata.ldo_ena, - GPIOF_OUT_INIT_LOW, "WM8915 ENA"); - if (ret < 0) { - dev_err(&i2c->dev, "Failed to request GPIO %d: %d\n", - wm8915->pdata.ldo_ena, ret); - goto err; - } - } - - ret = snd_soc_register_codec(&i2c->dev, - &soc_codec_dev_wm8915, wm8915_dai, - ARRAY_SIZE(wm8915_dai)); - if (ret < 0) - goto err_gpio; - - return ret; - -err_gpio: - if (wm8915->pdata.ldo_ena > 0) - gpio_free(wm8915->pdata.ldo_ena); -err: - kfree(wm8915); - - return ret; -} - -static __devexit int wm8915_i2c_remove(struct i2c_client *client) -{ - struct wm8915_priv *wm8915 = i2c_get_clientdata(client); - - snd_soc_unregister_codec(&client->dev); - if (wm8915->pdata.ldo_ena > 0) - gpio_free(wm8915->pdata.ldo_ena); - kfree(i2c_get_clientdata(client)); - return 0; -} - -static const struct i2c_device_id wm8915_i2c_id[] = { - { "wm8915", 0 }, - { } -}; -MODULE_DEVICE_TABLE(i2c, wm8915_i2c_id); - -static struct i2c_driver wm8915_i2c_driver = { - .driver = { - .name = "wm8915", - .owner = THIS_MODULE, - }, - .probe = wm8915_i2c_probe, - .remove = __devexit_p(wm8915_i2c_remove), - .id_table = wm8915_i2c_id, -}; - -static int __init wm8915_modinit(void) -{ - int ret; - - ret = i2c_add_driver(&wm8915_i2c_driver); - if (ret != 0) { - printk(KERN_ERR "Failed to register WM8915 I2C driver: %d\n", - ret); - } - - return ret; -} -module_init(wm8915_modinit); - -static void __exit wm8915_exit(void) -{ - i2c_del_driver(&wm8915_i2c_driver); -} -module_exit(wm8915_exit); - -MODULE_DESCRIPTION("ASoC WM8915 driver"); -MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); -MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/wm8915.h b/sound/soc/codecs/wm8915.h deleted file mode 100644 index 200ffd7bf95..00000000000 --- a/sound/soc/codecs/wm8915.h +++ /dev/null @@ -1,3717 +0,0 @@ -/* - * wm8915.h - WM8915 audio codec interface - * - * Copyright 2011 Wolfson Microelectronics PLC. - * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef _WM8915_H -#define _WM8915_H - -#define WM8915_SYSCLK_MCLK1 1 -#define WM8915_SYSCLK_MCLK2 2 -#define WM8915_SYSCLK_FLL 3 - -#define WM8915_FLL_MCLK1 1 -#define WM8915_FLL_MCLK2 2 -#define WM8915_FLL_DACLRCLK1 3 -#define WM8915_FLL_BCLK1 4 - -typedef void (*wm8915_polarity_fn)(struct snd_soc_codec *codec, int polarity); - -int wm8915_detect(struct snd_soc_codec *codec, struct snd_soc_jack *jack, - wm8915_polarity_fn polarity_cb); - -/* - * Register values. - */ -#define WM8915_SOFTWARE_RESET 0x00 -#define WM8915_POWER_MANAGEMENT_1 0x01 -#define WM8915_POWER_MANAGEMENT_2 0x02 -#define WM8915_POWER_MANAGEMENT_3 0x03 -#define WM8915_POWER_MANAGEMENT_4 0x04 -#define WM8915_POWER_MANAGEMENT_5 0x05 -#define WM8915_POWER_MANAGEMENT_6 0x06 -#define WM8915_POWER_MANAGEMENT_7 0x07 -#define WM8915_POWER_MANAGEMENT_8 0x08 -#define WM8915_LEFT_LINE_INPUT_VOLUME 0x10 -#define WM8915_RIGHT_LINE_INPUT_VOLUME 0x11 -#define WM8915_LINE_INPUT_CONTROL 0x12 -#define WM8915_DAC1_HPOUT1_VOLUME 0x15 -#define WM8915_DAC2_HPOUT2_VOLUME 0x16 -#define WM8915_DAC1_LEFT_VOLUME 0x18 -#define WM8915_DAC1_RIGHT_VOLUME 0x19 -#define WM8915_DAC2_LEFT_VOLUME 0x1A -#define WM8915_DAC2_RIGHT_VOLUME 0x1B -#define WM8915_OUTPUT1_LEFT_VOLUME 0x1C -#define WM8915_OUTPUT1_RIGHT_VOLUME 0x1D -#define WM8915_OUTPUT2_LEFT_VOLUME 0x1E -#define WM8915_OUTPUT2_RIGHT_VOLUME 0x1F -#define WM8915_MICBIAS_1 0x20 -#define WM8915_MICBIAS_2 0x21 -#define WM8915_LDO_1 0x28 -#define WM8915_LDO_2 0x29 -#define WM8915_ACCESSORY_DETECT_MODE_1 0x30 -#define WM8915_ACCESSORY_DETECT_MODE_2 0x31 -#define WM8915_HEADPHONE_DETECT_1 0x34 -#define WM8915_HEADPHONE_DETECT_2 0x35 -#define WM8915_MIC_DETECT_1 0x38 -#define WM8915_MIC_DETECT_2 0x39 -#define WM8915_MIC_DETECT_3 0x3A -#define WM8915_CHARGE_PUMP_1 0x40 -#define WM8915_CHARGE_PUMP_2 0x41 -#define WM8915_DC_SERVO_1 0x50 -#define WM8915_DC_SERVO_2 0x51 -#define WM8915_DC_SERVO_3 0x52 -#define WM8915_DC_SERVO_5 0x54 -#define WM8915_DC_SERVO_6 0x55 -#define WM8915_DC_SERVO_7 0x56 -#define WM8915_DC_SERVO_READBACK_0 0x57 -#define WM8915_ANALOGUE_HP_1 0x60 -#define WM8915_ANALOGUE_HP_2 0x61 -#define WM8915_CHIP_REVISION 0x100 -#define WM8915_CONTROL_INTERFACE_1 0x101 -#define WM8915_WRITE_SEQUENCER_CTRL_1 0x110 -#define WM8915_WRITE_SEQUENCER_CTRL_2 0x111 -#define WM8915_AIF_CLOCKING_1 0x200 -#define WM8915_AIF_CLOCKING_2 0x201 -#define WM8915_CLOCKING_1 0x208 -#define WM8915_CLOCKING_2 0x209 -#define WM8915_AIF_RATE 0x210 -#define WM8915_FLL_CONTROL_1 0x220 -#define WM8915_FLL_CONTROL_2 0x221 -#define WM8915_FLL_CONTROL_3 0x222 -#define WM8915_FLL_CONTROL_4 0x223 -#define WM8915_FLL_CONTROL_5 0x224 -#define WM8915_FLL_CONTROL_6 0x225 -#define WM8915_FLL_EFS_1 0x226 -#define WM8915_FLL_EFS_2 0x227 -#define WM8915_AIF1_CONTROL 0x300 -#define WM8915_AIF1_BCLK 0x301 -#define WM8915_AIF1_TX_LRCLK_1 0x302 -#define WM8915_AIF1_TX_LRCLK_2 0x303 -#define WM8915_AIF1_RX_LRCLK_1 0x304 -#define WM8915_AIF1_RX_LRCLK_2 0x305 -#define WM8915_AIF1TX_DATA_CONFIGURATION_1 0x306 -#define WM8915_AIF1TX_DATA_CONFIGURATION_2 0x307 -#define WM8915_AIF1RX_DATA_CONFIGURATION 0x308 -#define WM8915_AIF1TX_CHANNEL_0_CONFIGURATION 0x309 -#define WM8915_AIF1TX_CHANNEL_1_CONFIGURATION 0x30A -#define WM8915_AIF1TX_CHANNEL_2_CONFIGURATION 0x30B -#define WM8915_AIF1TX_CHANNEL_3_CONFIGURATION 0x30C -#define WM8915_AIF1TX_CHANNEL_4_CONFIGURATION 0x30D -#define WM8915_AIF1TX_CHANNEL_5_CONFIGURATION 0x30E -#define WM8915_AIF1RX_CHANNEL_0_CONFIGURATION 0x30F -#define WM8915_AIF1RX_CHANNEL_1_CONFIGURATION 0x310 -#define WM8915_AIF1RX_CHANNEL_2_CONFIGURATION 0x311 -#define WM8915_AIF1RX_CHANNEL_3_CONFIGURATION 0x312 -#define WM8915_AIF1RX_CHANNEL_4_CONFIGURATION 0x313 -#define WM8915_AIF1RX_CHANNEL_5_CONFIGURATION 0x314 -#define WM8915_AIF1RX_MONO_CONFIGURATION 0x315 -#define WM8915_AIF1TX_TEST 0x31A -#define WM8915_AIF2_CONTROL 0x320 -#define WM8915_AIF2_BCLK 0x321 -#define WM8915_AIF2_TX_LRCLK_1 0x322 -#define WM8915_AIF2_TX_LRCLK_2 0x323 -#define WM8915_AIF2_RX_LRCLK_1 0x324 -#define WM8915_AIF2_RX_LRCLK_2 0x325 -#define WM8915_AIF2TX_DATA_CONFIGURATION_1 0x326 -#define WM8915_AIF2TX_DATA_CONFIGURATION_2 0x327 -#define WM8915_AIF2RX_DATA_CONFIGURATION 0x328 -#define WM8915_AIF2TX_CHANNEL_0_CONFIGURATION 0x329 -#define WM8915_AIF2TX_CHANNEL_1_CONFIGURATION 0x32A -#define WM8915_AIF2RX_CHANNEL_0_CONFIGURATION 0x32B -#define WM8915_AIF2RX_CHANNEL_1_CONFIGURATION 0x32C -#define WM8915_AIF2RX_MONO_CONFIGURATION 0x32D -#define WM8915_AIF2TX_TEST 0x32F -#define WM8915_DSP1_TX_LEFT_VOLUME 0x400 -#define WM8915_DSP1_TX_RIGHT_VOLUME 0x401 -#define WM8915_DSP1_RX_LEFT_VOLUME 0x402 -#define WM8915_DSP1_RX_RIGHT_VOLUME 0x403 -#define WM8915_DSP1_TX_FILTERS 0x410 -#define WM8915_DSP1_RX_FILTERS_1 0x420 -#define WM8915_DSP1_RX_FILTERS_2 0x421 -#define WM8915_DSP1_DRC_1 0x440 -#define WM8915_DSP1_DRC_2 0x441 -#define WM8915_DSP1_DRC_3 0x442 -#define WM8915_DSP1_DRC_4 0x443 -#define WM8915_DSP1_DRC_5 0x444 -#define WM8915_DSP1_RX_EQ_GAINS_1 0x480 -#define WM8915_DSP1_RX_EQ_GAINS_2 0x481 -#define WM8915_DSP1_RX_EQ_BAND_1_A 0x482 -#define WM8915_DSP1_RX_EQ_BAND_1_B 0x483 -#define WM8915_DSP1_RX_EQ_BAND_1_PG 0x484 -#define WM8915_DSP1_RX_EQ_BAND_2_A 0x485 -#define WM8915_DSP1_RX_EQ_BAND_2_B 0x486 -#define WM8915_DSP1_RX_EQ_BAND_2_C 0x487 -#define WM8915_DSP1_RX_EQ_BAND_2_PG 0x488 -#define WM8915_DSP1_RX_EQ_BAND_3_A 0x489 -#define WM8915_DSP1_RX_EQ_BAND_3_B 0x48A -#define WM8915_DSP1_RX_EQ_BAND_3_C 0x48B -#define WM8915_DSP1_RX_EQ_BAND_3_PG 0x48C -#define WM8915_DSP1_RX_EQ_BAND_4_A 0x48D -#define WM8915_DSP1_RX_EQ_BAND_4_B 0x48E -#define WM8915_DSP1_RX_EQ_BAND_4_C 0x48F -#define WM8915_DSP1_RX_EQ_BAND_4_PG 0x490 -#define WM8915_DSP1_RX_EQ_BAND_5_A 0x491 -#define WM8915_DSP1_RX_EQ_BAND_5_B 0x492 -#define WM8915_DSP1_RX_EQ_BAND_5_PG 0x493 -#define WM8915_DSP2_TX_LEFT_VOLUME 0x500 -#define WM8915_DSP2_TX_RIGHT_VOLUME 0x501 -#define WM8915_DSP2_RX_LEFT_VOLUME 0x502 -#define WM8915_DSP2_RX_RIGHT_VOLUME 0x503 -#define WM8915_DSP2_TX_FILTERS 0x510 -#define WM8915_DSP2_RX_FILTERS_1 0x520 -#define WM8915_DSP2_RX_FILTERS_2 0x521 -#define WM8915_DSP2_DRC_1 0x540 -#define WM8915_DSP2_DRC_2 0x541 -#define WM8915_DSP2_DRC_3 0x542 -#define WM8915_DSP2_DRC_4 0x543 -#define WM8915_DSP2_DRC_5 0x544 -#define WM8915_DSP2_RX_EQ_GAINS_1 0x580 -#define WM8915_DSP2_RX_EQ_GAINS_2 0x581 -#define WM8915_DSP2_RX_EQ_BAND_1_A 0x582 -#define WM8915_DSP2_RX_EQ_BAND_1_B 0x583 -#define WM8915_DSP2_RX_EQ_BAND_1_PG 0x584 -#define WM8915_DSP2_RX_EQ_BAND_2_A 0x585 -#define WM8915_DSP2_RX_EQ_BAND_2_B 0x586 -#define WM8915_DSP2_RX_EQ_BAND_2_C 0x587 -#define WM8915_DSP2_RX_EQ_BAND_2_PG 0x588 -#define WM8915_DSP2_RX_EQ_BAND_3_A 0x589 -#define WM8915_DSP2_RX_EQ_BAND_3_B 0x58A -#define WM8915_DSP2_RX_EQ_BAND_3_C 0x58B -#define WM8915_DSP2_RX_EQ_BAND_3_PG 0x58C -#define WM8915_DSP2_RX_EQ_BAND_4_A 0x58D -#define WM8915_DSP2_RX_EQ_BAND_4_B 0x58E -#define WM8915_DSP2_RX_EQ_BAND_4_C 0x58F -#define WM8915_DSP2_RX_EQ_BAND_4_PG 0x590 -#define WM8915_DSP2_RX_EQ_BAND_5_A 0x591 -#define WM8915_DSP2_RX_EQ_BAND_5_B 0x592 -#define WM8915_DSP2_RX_EQ_BAND_5_PG 0x593 -#define WM8915_DAC1_MIXER_VOLUMES 0x600 -#define WM8915_DAC1_LEFT_MIXER_ROUTING 0x601 -#define WM8915_DAC1_RIGHT_MIXER_ROUTING 0x602 -#define WM8915_DAC2_MIXER_VOLUMES 0x603 -#define WM8915_DAC2_LEFT_MIXER_ROUTING 0x604 -#define WM8915_DAC2_RIGHT_MIXER_ROUTING 0x605 -#define WM8915_DSP1_TX_LEFT_MIXER_ROUTING 0x606 -#define WM8915_DSP1_TX_RIGHT_MIXER_ROUTING 0x607 -#define WM8915_DSP2_TX_LEFT_MIXER_ROUTING 0x608 -#define WM8915_DSP2_TX_RIGHT_MIXER_ROUTING 0x609 -#define WM8915_DSP_TX_MIXER_SELECT 0x60A -#define WM8915_DAC_SOFTMUTE 0x610 -#define WM8915_OVERSAMPLING 0x620 -#define WM8915_SIDETONE 0x621 -#define WM8915_GPIO_1 0x700 -#define WM8915_GPIO_2 0x701 -#define WM8915_GPIO_3 0x702 -#define WM8915_GPIO_4 0x703 -#define WM8915_GPIO_5 0x704 -#define WM8915_PULL_CONTROL_1 0x720 -#define WM8915_PULL_CONTROL_2 0x721 -#define WM8915_INTERRUPT_STATUS_1 0x730 -#define WM8915_INTERRUPT_STATUS_2 0x731 -#define WM8915_INTERRUPT_RAW_STATUS_2 0x732 -#define WM8915_INTERRUPT_STATUS_1_MASK 0x738 -#define WM8915_INTERRUPT_STATUS_2_MASK 0x739 -#define WM8915_INTERRUPT_CONTROL 0x740 -#define WM8915_LEFT_PDM_SPEAKER 0x800 -#define WM8915_RIGHT_PDM_SPEAKER 0x801 -#define WM8915_PDM_SPEAKER_MUTE_SEQUENCE 0x802 -#define WM8915_PDM_SPEAKER_VOLUME 0x803 -#define WM8915_WRITE_SEQUENCER_0 0x3000 -#define WM8915_WRITE_SEQUENCER_1 0x3001 -#define WM8915_WRITE_SEQUENCER_2 0x3002 -#define WM8915_WRITE_SEQUENCER_3 0x3003 -#define WM8915_WRITE_SEQUENCER_4 0x3004 -#define WM8915_WRITE_SEQUENCER_5 0x3005 -#define WM8915_WRITE_SEQUENCER_6 0x3006 -#define WM8915_WRITE_SEQUENCER_7 0x3007 -#define WM8915_WRITE_SEQUENCER_8 0x3008 -#define WM8915_WRITE_SEQUENCER_9 0x3009 -#define WM8915_WRITE_SEQUENCER_10 0x300A -#define WM8915_WRITE_SEQUENCER_11 0x300B -#define WM8915_WRITE_SEQUENCER_12 0x300C -#define WM8915_WRITE_SEQUENCER_13 0x300D -#define WM8915_WRITE_SEQUENCER_14 0x300E -#define WM8915_WRITE_SEQUENCER_15 0x300F -#define WM8915_WRITE_SEQUENCER_16 0x3010 -#define WM8915_WRITE_SEQUENCER_17 0x3011 -#define WM8915_WRITE_SEQUENCER_18 0x3012 -#define WM8915_WRITE_SEQUENCER_19 0x3013 -#define WM8915_WRITE_SEQUENCER_20 0x3014 -#define WM8915_WRITE_SEQUENCER_21 0x3015 -#define WM8915_WRITE_SEQUENCER_22 0x3016 -#define WM8915_WRITE_SEQUENCER_23 0x3017 -#define WM8915_WRITE_SEQUENCER_24 0x3018 -#define WM8915_WRITE_SEQUENCER_25 0x3019 -#define WM8915_WRITE_SEQUENCER_26 0x301A -#define WM8915_WRITE_SEQUENCER_27 0x301B -#define WM8915_WRITE_SEQUENCER_28 0x301C -#define WM8915_WRITE_SEQUENCER_29 0x301D -#define WM8915_WRITE_SEQUENCER_30 0x301E -#define WM8915_WRITE_SEQUENCER_31 0x301F -#define WM8915_WRITE_SEQUENCER_32 0x3020 -#define WM8915_WRITE_SEQUENCER_33 0x3021 -#define WM8915_WRITE_SEQUENCER_34 0x3022 -#define WM8915_WRITE_SEQUENCER_35 0x3023 -#define WM8915_WRITE_SEQUENCER_36 0x3024 -#define WM8915_WRITE_SEQUENCER_37 0x3025 -#define WM8915_WRITE_SEQUENCER_38 0x3026 -#define WM8915_WRITE_SEQUENCER_39 0x3027 -#define WM8915_WRITE_SEQUENCER_40 0x3028 -#define WM8915_WRITE_SEQUENCER_41 0x3029 -#define WM8915_WRITE_SEQUENCER_42 0x302A -#define WM8915_WRITE_SEQUENCER_43 0x302B -#define WM8915_WRITE_SEQUENCER_44 0x302C -#define WM8915_WRITE_SEQUENCER_45 0x302D -#define WM8915_WRITE_SEQUENCER_46 0x302E -#define WM8915_WRITE_SEQUENCER_47 0x302F -#define WM8915_WRITE_SEQUENCER_48 0x3030 -#define WM8915_WRITE_SEQUENCER_49 0x3031 -#define WM8915_WRITE_SEQUENCER_50 0x3032 -#define WM8915_WRITE_SEQUENCER_51 0x3033 -#define WM8915_WRITE_SEQUENCER_52 0x3034 -#define WM8915_WRITE_SEQUENCER_53 0x3035 -#define WM8915_WRITE_SEQUENCER_54 0x3036 -#define WM8915_WRITE_SEQUENCER_55 0x3037 -#define WM8915_WRITE_SEQUENCER_56 0x3038 -#define WM8915_WRITE_SEQUENCER_57 0x3039 -#define WM8915_WRITE_SEQUENCER_58 0x303A -#define WM8915_WRITE_SEQUENCER_59 0x303B -#define WM8915_WRITE_SEQUENCER_60 0x303C -#define WM8915_WRITE_SEQUENCER_61 0x303D -#define WM8915_WRITE_SEQUENCER_62 0x303E -#define WM8915_WRITE_SEQUENCER_63 0x303F -#define WM8915_WRITE_SEQUENCER_64 0x3040 -#define WM8915_WRITE_SEQUENCER_65 0x3041 -#define WM8915_WRITE_SEQUENCER_66 0x3042 -#define WM8915_WRITE_SEQUENCER_67 0x3043 -#define WM8915_WRITE_SEQUENCER_68 0x3044 -#define WM8915_WRITE_SEQUENCER_69 0x3045 -#define WM8915_WRITE_SEQUENCER_70 0x3046 -#define WM8915_WRITE_SEQUENCER_71 0x3047 -#define WM8915_WRITE_SEQUENCER_72 0x3048 -#define WM8915_WRITE_SEQUENCER_73 0x3049 -#define WM8915_WRITE_SEQUENCER_74 0x304A -#define WM8915_WRITE_SEQUENCER_75 0x304B -#define WM8915_WRITE_SEQUENCER_76 0x304C -#define WM8915_WRITE_SEQUENCER_77 0x304D -#define WM8915_WRITE_SEQUENCER_78 0x304E -#define WM8915_WRITE_SEQUENCER_79 0x304F -#define WM8915_WRITE_SEQUENCER_80 0x3050 -#define WM8915_WRITE_SEQUENCER_81 0x3051 -#define WM8915_WRITE_SEQUENCER_82 0x3052 -#define WM8915_WRITE_SEQUENCER_83 0x3053 -#define WM8915_WRITE_SEQUENCER_84 0x3054 -#define WM8915_WRITE_SEQUENCER_85 0x3055 -#define WM8915_WRITE_SEQUENCER_86 0x3056 -#define WM8915_WRITE_SEQUENCER_87 0x3057 -#define WM8915_WRITE_SEQUENCER_88 0x3058 -#define WM8915_WRITE_SEQUENCER_89 0x3059 -#define WM8915_WRITE_SEQUENCER_90 0x305A -#define WM8915_WRITE_SEQUENCER_91 0x305B -#define WM8915_WRITE_SEQUENCER_92 0x305C -#define WM8915_WRITE_SEQUENCER_93 0x305D -#define WM8915_WRITE_SEQUENCER_94 0x305E -#define WM8915_WRITE_SEQUENCER_95 0x305F -#define WM8915_WRITE_SEQUENCER_96 0x3060 -#define WM8915_WRITE_SEQUENCER_97 0x3061 -#define WM8915_WRITE_SEQUENCER_98 0x3062 -#define WM8915_WRITE_SEQUENCER_99 0x3063 -#define WM8915_WRITE_SEQUENCER_100 0x3064 -#define WM8915_WRITE_SEQUENCER_101 0x3065 -#define WM8915_WRITE_SEQUENCER_102 0x3066 -#define WM8915_WRITE_SEQUENCER_103 0x3067 -#define WM8915_WRITE_SEQUENCER_104 0x3068 -#define WM8915_WRITE_SEQUENCER_105 0x3069 -#define WM8915_WRITE_SEQUENCER_106 0x306A -#define WM8915_WRITE_SEQUENCER_107 0x306B -#define WM8915_WRITE_SEQUENCER_108 0x306C -#define WM8915_WRITE_SEQUENCER_109 0x306D -#define WM8915_WRITE_SEQUENCER_110 0x306E -#define WM8915_WRITE_SEQUENCER_111 0x306F -#define WM8915_WRITE_SEQUENCER_112 0x3070 -#define WM8915_WRITE_SEQUENCER_113 0x3071 -#define WM8915_WRITE_SEQUENCER_114 0x3072 -#define WM8915_WRITE_SEQUENCER_115 0x3073 -#define WM8915_WRITE_SEQUENCER_116 0x3074 -#define WM8915_WRITE_SEQUENCER_117 0x3075 -#define WM8915_WRITE_SEQUENCER_118 0x3076 -#define WM8915_WRITE_SEQUENCER_119 0x3077 -#define WM8915_WRITE_SEQUENCER_120 0x3078 -#define WM8915_WRITE_SEQUENCER_121 0x3079 -#define WM8915_WRITE_SEQUENCER_122 0x307A -#define WM8915_WRITE_SEQUENCER_123 0x307B -#define WM8915_WRITE_SEQUENCER_124 0x307C -#define WM8915_WRITE_SEQUENCER_125 0x307D -#define WM8915_WRITE_SEQUENCER_126 0x307E -#define WM8915_WRITE_SEQUENCER_127 0x307F -#define WM8915_WRITE_SEQUENCER_128 0x3080 -#define WM8915_WRITE_SEQUENCER_129 0x3081 -#define WM8915_WRITE_SEQUENCER_130 0x3082 -#define WM8915_WRITE_SEQUENCER_131 0x3083 -#define WM8915_WRITE_SEQUENCER_132 0x3084 -#define WM8915_WRITE_SEQUENCER_133 0x3085 -#define WM8915_WRITE_SEQUENCER_134 0x3086 -#define WM8915_WRITE_SEQUENCER_135 0x3087 -#define WM8915_WRITE_SEQUENCER_136 0x3088 -#define WM8915_WRITE_SEQUENCER_137 0x3089 -#define WM8915_WRITE_SEQUENCER_138 0x308A -#define WM8915_WRITE_SEQUENCER_139 0x308B -#define WM8915_WRITE_SEQUENCER_140 0x308C -#define WM8915_WRITE_SEQUENCER_141 0x308D -#define WM8915_WRITE_SEQUENCER_142 0x308E -#define WM8915_WRITE_SEQUENCER_143 0x308F -#define WM8915_WRITE_SEQUENCER_144 0x3090 -#define WM8915_WRITE_SEQUENCER_145 0x3091 -#define WM8915_WRITE_SEQUENCER_146 0x3092 -#define WM8915_WRITE_SEQUENCER_147 0x3093 -#define WM8915_WRITE_SEQUENCER_148 0x3094 -#define WM8915_WRITE_SEQUENCER_149 0x3095 -#define WM8915_WRITE_SEQUENCER_150 0x3096 -#define WM8915_WRITE_SEQUENCER_151 0x3097 -#define WM8915_WRITE_SEQUENCER_152 0x3098 -#define WM8915_WRITE_SEQUENCER_153 0x3099 -#define WM8915_WRITE_SEQUENCER_154 0x309A -#define WM8915_WRITE_SEQUENCER_155 0x309B -#define WM8915_WRITE_SEQUENCER_156 0x309C -#define WM8915_WRITE_SEQUENCER_157 0x309D -#define WM8915_WRITE_SEQUENCER_158 0x309E -#define WM8915_WRITE_SEQUENCER_159 0x309F -#define WM8915_WRITE_SEQUENCER_160 0x30A0 -#define WM8915_WRITE_SEQUENCER_161 0x30A1 -#define WM8915_WRITE_SEQUENCER_162 0x30A2 -#define WM8915_WRITE_SEQUENCER_163 0x30A3 -#define WM8915_WRITE_SEQUENCER_164 0x30A4 -#define WM8915_WRITE_SEQUENCER_165 0x30A5 -#define WM8915_WRITE_SEQUENCER_166 0x30A6 -#define WM8915_WRITE_SEQUENCER_167 0x30A7 -#define WM8915_WRITE_SEQUENCER_168 0x30A8 -#define WM8915_WRITE_SEQUENCER_169 0x30A9 -#define WM8915_WRITE_SEQUENCER_170 0x30AA -#define WM8915_WRITE_SEQUENCER_171 0x30AB -#define WM8915_WRITE_SEQUENCER_172 0x30AC -#define WM8915_WRITE_SEQUENCER_173 0x30AD -#define WM8915_WRITE_SEQUENCER_174 0x30AE -#define WM8915_WRITE_SEQUENCER_175 0x30AF -#define WM8915_WRITE_SEQUENCER_176 0x30B0 -#define WM8915_WRITE_SEQUENCER_177 0x30B1 -#define WM8915_WRITE_SEQUENCER_178 0x30B2 -#define WM8915_WRITE_SEQUENCER_179 0x30B3 -#define WM8915_WRITE_SEQUENCER_180 0x30B4 -#define WM8915_WRITE_SEQUENCER_181 0x30B5 -#define WM8915_WRITE_SEQUENCER_182 0x30B6 -#define WM8915_WRITE_SEQUENCER_183 0x30B7 -#define WM8915_WRITE_SEQUENCER_184 0x30B8 -#define WM8915_WRITE_SEQUENCER_185 0x30B9 -#define WM8915_WRITE_SEQUENCER_186 0x30BA -#define WM8915_WRITE_SEQUENCER_187 0x30BB -#define WM8915_WRITE_SEQUENCER_188 0x30BC -#define WM8915_WRITE_SEQUENCER_189 0x30BD -#define WM8915_WRITE_SEQUENCER_190 0x30BE -#define WM8915_WRITE_SEQUENCER_191 0x30BF -#define WM8915_WRITE_SEQUENCER_192 0x30C0 -#define WM8915_WRITE_SEQUENCER_193 0x30C1 -#define WM8915_WRITE_SEQUENCER_194 0x30C2 -#define WM8915_WRITE_SEQUENCER_195 0x30C3 -#define WM8915_WRITE_SEQUENCER_196 0x30C4 -#define WM8915_WRITE_SEQUENCER_197 0x30C5 -#define WM8915_WRITE_SEQUENCER_198 0x30C6 -#define WM8915_WRITE_SEQUENCER_199 0x30C7 -#define WM8915_WRITE_SEQUENCER_200 0x30C8 -#define WM8915_WRITE_SEQUENCER_201 0x30C9 -#define WM8915_WRITE_SEQUENCER_202 0x30CA -#define WM8915_WRITE_SEQUENCER_203 0x30CB -#define WM8915_WRITE_SEQUENCER_204 0x30CC -#define WM8915_WRITE_SEQUENCER_205 0x30CD -#define WM8915_WRITE_SEQUENCER_206 0x30CE -#define WM8915_WRITE_SEQUENCER_207 0x30CF -#define WM8915_WRITE_SEQUENCER_208 0x30D0 -#define WM8915_WRITE_SEQUENCER_209 0x30D1 -#define WM8915_WRITE_SEQUENCER_210 0x30D2 -#define WM8915_WRITE_SEQUENCER_211 0x30D3 -#define WM8915_WRITE_SEQUENCER_212 0x30D4 -#define WM8915_WRITE_SEQUENCER_213 0x30D5 -#define WM8915_WRITE_SEQUENCER_214 0x30D6 -#define WM8915_WRITE_SEQUENCER_215 0x30D7 -#define WM8915_WRITE_SEQUENCER_216 0x30D8 -#define WM8915_WRITE_SEQUENCER_217 0x30D9 -#define WM8915_WRITE_SEQUENCER_218 0x30DA -#define WM8915_WRITE_SEQUENCER_219 0x30DB -#define WM8915_WRITE_SEQUENCER_220 0x30DC -#define WM8915_WRITE_SEQUENCER_221 0x30DD -#define WM8915_WRITE_SEQUENCER_222 0x30DE -#define WM8915_WRITE_SEQUENCER_223 0x30DF -#define WM8915_WRITE_SEQUENCER_224 0x30E0 -#define WM8915_WRITE_SEQUENCER_225 0x30E1 -#define WM8915_WRITE_SEQUENCER_226 0x30E2 -#define WM8915_WRITE_SEQUENCER_227 0x30E3 -#define WM8915_WRITE_SEQUENCER_228 0x30E4 -#define WM8915_WRITE_SEQUENCER_229 0x30E5 -#define WM8915_WRITE_SEQUENCER_230 0x30E6 -#define WM8915_WRITE_SEQUENCER_231 0x30E7 -#define WM8915_WRITE_SEQUENCER_232 0x30E8 -#define WM8915_WRITE_SEQUENCER_233 0x30E9 -#define WM8915_WRITE_SEQUENCER_234 0x30EA -#define WM8915_WRITE_SEQUENCER_235 0x30EB -#define WM8915_WRITE_SEQUENCER_236 0x30EC -#define WM8915_WRITE_SEQUENCER_237 0x30ED -#define WM8915_WRITE_SEQUENCER_238 0x30EE -#define WM8915_WRITE_SEQUENCER_239 0x30EF -#define WM8915_WRITE_SEQUENCER_240 0x30F0 -#define WM8915_WRITE_SEQUENCER_241 0x30F1 -#define WM8915_WRITE_SEQUENCER_242 0x30F2 -#define WM8915_WRITE_SEQUENCER_243 0x30F3 -#define WM8915_WRITE_SEQUENCER_244 0x30F4 -#define WM8915_WRITE_SEQUENCER_245 0x30F5 -#define WM8915_WRITE_SEQUENCER_246 0x30F6 -#define WM8915_WRITE_SEQUENCER_247 0x30F7 -#define WM8915_WRITE_SEQUENCER_248 0x30F8 -#define WM8915_WRITE_SEQUENCER_249 0x30F9 -#define WM8915_WRITE_SEQUENCER_250 0x30FA -#define WM8915_WRITE_SEQUENCER_251 0x30FB -#define WM8915_WRITE_SEQUENCER_252 0x30FC -#define WM8915_WRITE_SEQUENCER_253 0x30FD -#define WM8915_WRITE_SEQUENCER_254 0x30FE -#define WM8915_WRITE_SEQUENCER_255 0x30FF -#define WM8915_WRITE_SEQUENCER_256 0x3100 -#define WM8915_WRITE_SEQUENCER_257 0x3101 -#define WM8915_WRITE_SEQUENCER_258 0x3102 -#define WM8915_WRITE_SEQUENCER_259 0x3103 -#define WM8915_WRITE_SEQUENCER_260 0x3104 -#define WM8915_WRITE_SEQUENCER_261 0x3105 -#define WM8915_WRITE_SEQUENCER_262 0x3106 -#define WM8915_WRITE_SEQUENCER_263 0x3107 -#define WM8915_WRITE_SEQUENCER_264 0x3108 -#define WM8915_WRITE_SEQUENCER_265 0x3109 -#define WM8915_WRITE_SEQUENCER_266 0x310A -#define WM8915_WRITE_SEQUENCER_267 0x310B -#define WM8915_WRITE_SEQUENCER_268 0x310C -#define WM8915_WRITE_SEQUENCER_269 0x310D -#define WM8915_WRITE_SEQUENCER_270 0x310E -#define WM8915_WRITE_SEQUENCER_271 0x310F -#define WM8915_WRITE_SEQUENCER_272 0x3110 -#define WM8915_WRITE_SEQUENCER_273 0x3111 -#define WM8915_WRITE_SEQUENCER_274 0x3112 -#define WM8915_WRITE_SEQUENCER_275 0x3113 -#define WM8915_WRITE_SEQUENCER_276 0x3114 -#define WM8915_WRITE_SEQUENCER_277 0x3115 -#define WM8915_WRITE_SEQUENCER_278 0x3116 -#define WM8915_WRITE_SEQUENCER_279 0x3117 -#define WM8915_WRITE_SEQUENCER_280 0x3118 -#define WM8915_WRITE_SEQUENCER_281 0x3119 -#define WM8915_WRITE_SEQUENCER_282 0x311A -#define WM8915_WRITE_SEQUENCER_283 0x311B -#define WM8915_WRITE_SEQUENCER_284 0x311C -#define WM8915_WRITE_SEQUENCER_285 0x311D -#define WM8915_WRITE_SEQUENCER_286 0x311E -#define WM8915_WRITE_SEQUENCER_287 0x311F -#define WM8915_WRITE_SEQUENCER_288 0x3120 -#define WM8915_WRITE_SEQUENCER_289 0x3121 -#define WM8915_WRITE_SEQUENCER_290 0x3122 -#define WM8915_WRITE_SEQUENCER_291 0x3123 -#define WM8915_WRITE_SEQUENCER_292 0x3124 -#define WM8915_WRITE_SEQUENCER_293 0x3125 -#define WM8915_WRITE_SEQUENCER_294 0x3126 -#define WM8915_WRITE_SEQUENCER_295 0x3127 -#define WM8915_WRITE_SEQUENCER_296 0x3128 -#define WM8915_WRITE_SEQUENCER_297 0x3129 -#define WM8915_WRITE_SEQUENCER_298 0x312A -#define WM8915_WRITE_SEQUENCER_299 0x312B -#define WM8915_WRITE_SEQUENCER_300 0x312C -#define WM8915_WRITE_SEQUENCER_301 0x312D -#define WM8915_WRITE_SEQUENCER_302 0x312E -#define WM8915_WRITE_SEQUENCER_303 0x312F -#define WM8915_WRITE_SEQUENCER_304 0x3130 -#define WM8915_WRITE_SEQUENCER_305 0x3131 -#define WM8915_WRITE_SEQUENCER_306 0x3132 -#define WM8915_WRITE_SEQUENCER_307 0x3133 -#define WM8915_WRITE_SEQUENCER_308 0x3134 -#define WM8915_WRITE_SEQUENCER_309 0x3135 -#define WM8915_WRITE_SEQUENCER_310 0x3136 -#define WM8915_WRITE_SEQUENCER_311 0x3137 -#define WM8915_WRITE_SEQUENCER_312 0x3138 -#define WM8915_WRITE_SEQUENCER_313 0x3139 -#define WM8915_WRITE_SEQUENCER_314 0x313A -#define WM8915_WRITE_SEQUENCER_315 0x313B -#define WM8915_WRITE_SEQUENCER_316 0x313C -#define WM8915_WRITE_SEQUENCER_317 0x313D -#define WM8915_WRITE_SEQUENCER_318 0x313E -#define WM8915_WRITE_SEQUENCER_319 0x313F -#define WM8915_WRITE_SEQUENCER_320 0x3140 -#define WM8915_WRITE_SEQUENCER_321 0x3141 -#define WM8915_WRITE_SEQUENCER_322 0x3142 -#define WM8915_WRITE_SEQUENCER_323 0x3143 -#define WM8915_WRITE_SEQUENCER_324 0x3144 -#define WM8915_WRITE_SEQUENCER_325 0x3145 -#define WM8915_WRITE_SEQUENCER_326 0x3146 -#define WM8915_WRITE_SEQUENCER_327 0x3147 -#define WM8915_WRITE_SEQUENCER_328 0x3148 -#define WM8915_WRITE_SEQUENCER_329 0x3149 -#define WM8915_WRITE_SEQUENCER_330 0x314A -#define WM8915_WRITE_SEQUENCER_331 0x314B -#define WM8915_WRITE_SEQUENCER_332 0x314C -#define WM8915_WRITE_SEQUENCER_333 0x314D -#define WM8915_WRITE_SEQUENCER_334 0x314E -#define WM8915_WRITE_SEQUENCER_335 0x314F -#define WM8915_WRITE_SEQUENCER_336 0x3150 -#define WM8915_WRITE_SEQUENCER_337 0x3151 -#define WM8915_WRITE_SEQUENCER_338 0x3152 -#define WM8915_WRITE_SEQUENCER_339 0x3153 -#define WM8915_WRITE_SEQUENCER_340 0x3154 -#define WM8915_WRITE_SEQUENCER_341 0x3155 -#define WM8915_WRITE_SEQUENCER_342 0x3156 -#define WM8915_WRITE_SEQUENCER_343 0x3157 -#define WM8915_WRITE_SEQUENCER_344 0x3158 -#define WM8915_WRITE_SEQUENCER_345 0x3159 -#define WM8915_WRITE_SEQUENCER_346 0x315A -#define WM8915_WRITE_SEQUENCER_347 0x315B -#define WM8915_WRITE_SEQUENCER_348 0x315C -#define WM8915_WRITE_SEQUENCER_349 0x315D -#define WM8915_WRITE_SEQUENCER_350 0x315E -#define WM8915_WRITE_SEQUENCER_351 0x315F -#define WM8915_WRITE_SEQUENCER_352 0x3160 -#define WM8915_WRITE_SEQUENCER_353 0x3161 -#define WM8915_WRITE_SEQUENCER_354 0x3162 -#define WM8915_WRITE_SEQUENCER_355 0x3163 -#define WM8915_WRITE_SEQUENCER_356 0x3164 -#define WM8915_WRITE_SEQUENCER_357 0x3165 -#define WM8915_WRITE_SEQUENCER_358 0x3166 -#define WM8915_WRITE_SEQUENCER_359 0x3167 -#define WM8915_WRITE_SEQUENCER_360 0x3168 -#define WM8915_WRITE_SEQUENCER_361 0x3169 -#define WM8915_WRITE_SEQUENCER_362 0x316A -#define WM8915_WRITE_SEQUENCER_363 0x316B -#define WM8915_WRITE_SEQUENCER_364 0x316C -#define WM8915_WRITE_SEQUENCER_365 0x316D -#define WM8915_WRITE_SEQUENCER_366 0x316E -#define WM8915_WRITE_SEQUENCER_367 0x316F -#define WM8915_WRITE_SEQUENCER_368 0x3170 -#define WM8915_WRITE_SEQUENCER_369 0x3171 -#define WM8915_WRITE_SEQUENCER_370 0x3172 -#define WM8915_WRITE_SEQUENCER_371 0x3173 -#define WM8915_WRITE_SEQUENCER_372 0x3174 -#define WM8915_WRITE_SEQUENCER_373 0x3175 -#define WM8915_WRITE_SEQUENCER_374 0x3176 -#define WM8915_WRITE_SEQUENCER_375 0x3177 -#define WM8915_WRITE_SEQUENCER_376 0x3178 -#define WM8915_WRITE_SEQUENCER_377 0x3179 -#define WM8915_WRITE_SEQUENCER_378 0x317A -#define WM8915_WRITE_SEQUENCER_379 0x317B -#define WM8915_WRITE_SEQUENCER_380 0x317C -#define WM8915_WRITE_SEQUENCER_381 0x317D -#define WM8915_WRITE_SEQUENCER_382 0x317E -#define WM8915_WRITE_SEQUENCER_383 0x317F -#define WM8915_WRITE_SEQUENCER_384 0x3180 -#define WM8915_WRITE_SEQUENCER_385 0x3181 -#define WM8915_WRITE_SEQUENCER_386 0x3182 -#define WM8915_WRITE_SEQUENCER_387 0x3183 -#define WM8915_WRITE_SEQUENCER_388 0x3184 -#define WM8915_WRITE_SEQUENCER_389 0x3185 -#define WM8915_WRITE_SEQUENCER_390 0x3186 -#define WM8915_WRITE_SEQUENCER_391 0x3187 -#define WM8915_WRITE_SEQUENCER_392 0x3188 -#define WM8915_WRITE_SEQUENCER_393 0x3189 -#define WM8915_WRITE_SEQUENCER_394 0x318A -#define WM8915_WRITE_SEQUENCER_395 0x318B -#define WM8915_WRITE_SEQUENCER_396 0x318C -#define WM8915_WRITE_SEQUENCER_397 0x318D -#define WM8915_WRITE_SEQUENCER_398 0x318E -#define WM8915_WRITE_SEQUENCER_399 0x318F -#define WM8915_WRITE_SEQUENCER_400 0x3190 -#define WM8915_WRITE_SEQUENCER_401 0x3191 -#define WM8915_WRITE_SEQUENCER_402 0x3192 -#define WM8915_WRITE_SEQUENCER_403 0x3193 -#define WM8915_WRITE_SEQUENCER_404 0x3194 -#define WM8915_WRITE_SEQUENCER_405 0x3195 -#define WM8915_WRITE_SEQUENCER_406 0x3196 -#define WM8915_WRITE_SEQUENCER_407 0x3197 -#define WM8915_WRITE_SEQUENCER_408 0x3198 -#define WM8915_WRITE_SEQUENCER_409 0x3199 -#define WM8915_WRITE_SEQUENCER_410 0x319A -#define WM8915_WRITE_SEQUENCER_411 0x319B -#define WM8915_WRITE_SEQUENCER_412 0x319C -#define WM8915_WRITE_SEQUENCER_413 0x319D -#define WM8915_WRITE_SEQUENCER_414 0x319E -#define WM8915_WRITE_SEQUENCER_415 0x319F -#define WM8915_WRITE_SEQUENCER_416 0x31A0 -#define WM8915_WRITE_SEQUENCER_417 0x31A1 -#define WM8915_WRITE_SEQUENCER_418 0x31A2 -#define WM8915_WRITE_SEQUENCER_419 0x31A3 -#define WM8915_WRITE_SEQUENCER_420 0x31A4 -#define WM8915_WRITE_SEQUENCER_421 0x31A5 -#define WM8915_WRITE_SEQUENCER_422 0x31A6 -#define WM8915_WRITE_SEQUENCER_423 0x31A7 -#define WM8915_WRITE_SEQUENCER_424 0x31A8 -#define WM8915_WRITE_SEQUENCER_425 0x31A9 -#define WM8915_WRITE_SEQUENCER_426 0x31AA -#define WM8915_WRITE_SEQUENCER_427 0x31AB -#define WM8915_WRITE_SEQUENCER_428 0x31AC -#define WM8915_WRITE_SEQUENCER_429 0x31AD -#define WM8915_WRITE_SEQUENCER_430 0x31AE -#define WM8915_WRITE_SEQUENCER_431 0x31AF -#define WM8915_WRITE_SEQUENCER_432 0x31B0 -#define WM8915_WRITE_SEQUENCER_433 0x31B1 -#define WM8915_WRITE_SEQUENCER_434 0x31B2 -#define WM8915_WRITE_SEQUENCER_435 0x31B3 -#define WM8915_WRITE_SEQUENCER_436 0x31B4 -#define WM8915_WRITE_SEQUENCER_437 0x31B5 -#define WM8915_WRITE_SEQUENCER_438 0x31B6 -#define WM8915_WRITE_SEQUENCER_439 0x31B7 -#define WM8915_WRITE_SEQUENCER_440 0x31B8 -#define WM8915_WRITE_SEQUENCER_441 0x31B9 -#define WM8915_WRITE_SEQUENCER_442 0x31BA -#define WM8915_WRITE_SEQUENCER_443 0x31BB -#define WM8915_WRITE_SEQUENCER_444 0x31BC -#define WM8915_WRITE_SEQUENCER_445 0x31BD -#define WM8915_WRITE_SEQUENCER_446 0x31BE -#define WM8915_WRITE_SEQUENCER_447 0x31BF -#define WM8915_WRITE_SEQUENCER_448 0x31C0 -#define WM8915_WRITE_SEQUENCER_449 0x31C1 -#define WM8915_WRITE_SEQUENCER_450 0x31C2 -#define WM8915_WRITE_SEQUENCER_451 0x31C3 -#define WM8915_WRITE_SEQUENCER_452 0x31C4 -#define WM8915_WRITE_SEQUENCER_453 0x31C5 -#define WM8915_WRITE_SEQUENCER_454 0x31C6 -#define WM8915_WRITE_SEQUENCER_455 0x31C7 -#define WM8915_WRITE_SEQUENCER_456 0x31C8 -#define WM8915_WRITE_SEQUENCER_457 0x31C9 -#define WM8915_WRITE_SEQUENCER_458 0x31CA -#define WM8915_WRITE_SEQUENCER_459 0x31CB -#define WM8915_WRITE_SEQUENCER_460 0x31CC -#define WM8915_WRITE_SEQUENCER_461 0x31CD -#define WM8915_WRITE_SEQUENCER_462 0x31CE -#define WM8915_WRITE_SEQUENCER_463 0x31CF -#define WM8915_WRITE_SEQUENCER_464 0x31D0 -#define WM8915_WRITE_SEQUENCER_465 0x31D1 -#define WM8915_WRITE_SEQUENCER_466 0x31D2 -#define WM8915_WRITE_SEQUENCER_467 0x31D3 -#define WM8915_WRITE_SEQUENCER_468 0x31D4 -#define WM8915_WRITE_SEQUENCER_469 0x31D5 -#define WM8915_WRITE_SEQUENCER_470 0x31D6 -#define WM8915_WRITE_SEQUENCER_471 0x31D7 -#define WM8915_WRITE_SEQUENCER_472 0x31D8 -#define WM8915_WRITE_SEQUENCER_473 0x31D9 -#define WM8915_WRITE_SEQUENCER_474 0x31DA -#define WM8915_WRITE_SEQUENCER_475 0x31DB -#define WM8915_WRITE_SEQUENCER_476 0x31DC -#define WM8915_WRITE_SEQUENCER_477 0x31DD -#define WM8915_WRITE_SEQUENCER_478 0x31DE -#define WM8915_WRITE_SEQUENCER_479 0x31DF -#define WM8915_WRITE_SEQUENCER_480 0x31E0 -#define WM8915_WRITE_SEQUENCER_481 0x31E1 -#define WM8915_WRITE_SEQUENCER_482 0x31E2 -#define WM8915_WRITE_SEQUENCER_483 0x31E3 -#define WM8915_WRITE_SEQUENCER_484 0x31E4 -#define WM8915_WRITE_SEQUENCER_485 0x31E5 -#define WM8915_WRITE_SEQUENCER_486 0x31E6 -#define WM8915_WRITE_SEQUENCER_487 0x31E7 -#define WM8915_WRITE_SEQUENCER_488 0x31E8 -#define WM8915_WRITE_SEQUENCER_489 0x31E9 -#define WM8915_WRITE_SEQUENCER_490 0x31EA -#define WM8915_WRITE_SEQUENCER_491 0x31EB -#define WM8915_WRITE_SEQUENCER_492 0x31EC -#define WM8915_WRITE_SEQUENCER_493 0x31ED -#define WM8915_WRITE_SEQUENCER_494 0x31EE -#define WM8915_WRITE_SEQUENCER_495 0x31EF -#define WM8915_WRITE_SEQUENCER_496 0x31F0 -#define WM8915_WRITE_SEQUENCER_497 0x31F1 -#define WM8915_WRITE_SEQUENCER_498 0x31F2 -#define WM8915_WRITE_SEQUENCER_499 0x31F3 -#define WM8915_WRITE_SEQUENCER_500 0x31F4 -#define WM8915_WRITE_SEQUENCER_501 0x31F5 -#define WM8915_WRITE_SEQUENCER_502 0x31F6 -#define WM8915_WRITE_SEQUENCER_503 0x31F7 -#define WM8915_WRITE_SEQUENCER_504 0x31F8 -#define WM8915_WRITE_SEQUENCER_505 0x31F9 -#define WM8915_WRITE_SEQUENCER_506 0x31FA -#define WM8915_WRITE_SEQUENCER_507 0x31FB -#define WM8915_WRITE_SEQUENCER_508 0x31FC -#define WM8915_WRITE_SEQUENCER_509 0x31FD -#define WM8915_WRITE_SEQUENCER_510 0x31FE -#define WM8915_WRITE_SEQUENCER_511 0x31FF - -#define WM8915_REGISTER_COUNT 706 -#define WM8915_MAX_REGISTER 0x31FF - -/* - * Field Definitions. - */ - -/* - * R0 (0x00) - Software Reset - */ -#define WM8915_SW_RESET_MASK 0xFFFF /* SW_RESET - [15:0] */ -#define WM8915_SW_RESET_SHIFT 0 /* SW_RESET - [15:0] */ -#define WM8915_SW_RESET_WIDTH 16 /* SW_RESET - [15:0] */ - -/* - * R1 (0x01) - Power Management (1) - */ -#define WM8915_MICB2_ENA 0x0200 /* MICB2_ENA */ -#define WM8915_MICB2_ENA_MASK 0x0200 /* MICB2_ENA */ -#define WM8915_MICB2_ENA_SHIFT 9 /* MICB2_ENA */ -#define WM8915_MICB2_ENA_WIDTH 1 /* MICB2_ENA */ -#define WM8915_MICB1_ENA 0x0100 /* MICB1_ENA */ -#define WM8915_MICB1_ENA_MASK 0x0100 /* MICB1_ENA */ -#define WM8915_MICB1_ENA_SHIFT 8 /* MICB1_ENA */ -#define WM8915_MICB1_ENA_WIDTH 1 /* MICB1_ENA */ -#define WM8915_HPOUT2L_ENA 0x0080 /* HPOUT2L_ENA */ -#define WM8915_HPOUT2L_ENA_MASK 0x0080 /* HPOUT2L_ENA */ -#define WM8915_HPOUT2L_ENA_SHIFT 7 /* HPOUT2L_ENA */ -#define WM8915_HPOUT2L_ENA_WIDTH 1 /* HPOUT2L_ENA */ -#define WM8915_HPOUT2R_ENA 0x0040 /* HPOUT2R_ENA */ -#define WM8915_HPOUT2R_ENA_MASK 0x0040 /* HPOUT2R_ENA */ -#define WM8915_HPOUT2R_ENA_SHIFT 6 /* HPOUT2R_ENA */ -#define WM8915_HPOUT2R_ENA_WIDTH 1 /* HPOUT2R_ENA */ -#define WM8915_HPOUT1L_ENA 0x0020 /* HPOUT1L_ENA */ -#define WM8915_HPOUT1L_ENA_MASK 0x0020 /* HPOUT1L_ENA */ -#define WM8915_HPOUT1L_ENA_SHIFT 5 /* HPOUT1L_ENA */ -#define WM8915_HPOUT1L_ENA_WIDTH 1 /* HPOUT1L_ENA */ -#define WM8915_HPOUT1R_ENA 0x0010 /* HPOUT1R_ENA */ -#define WM8915_HPOUT1R_ENA_MASK 0x0010 /* HPOUT1R_ENA */ -#define WM8915_HPOUT1R_ENA_SHIFT 4 /* HPOUT1R_ENA */ -#define WM8915_HPOUT1R_ENA_WIDTH 1 /* HPOUT1R_ENA */ -#define WM8915_BG_ENA 0x0001 /* BG_ENA */ -#define WM8915_BG_ENA_MASK 0x0001 /* BG_ENA */ -#define WM8915_BG_ENA_SHIFT 0 /* BG_ENA */ -#define WM8915_BG_ENA_WIDTH 1 /* BG_ENA */ - -/* - * R2 (0x02) - Power Management (2) - */ -#define WM8915_OPCLK_ENA 0x0800 /* OPCLK_ENA */ -#define WM8915_OPCLK_ENA_MASK 0x0800 /* OPCLK_ENA */ -#define WM8915_OPCLK_ENA_SHIFT 11 /* OPCLK_ENA */ -#define WM8915_OPCLK_ENA_WIDTH 1 /* OPCLK_ENA */ -#define WM8915_INL_ENA 0x0020 /* INL_ENA */ -#define WM8915_INL_ENA_MASK 0x0020 /* INL_ENA */ -#define WM8915_INL_ENA_SHIFT 5 /* INL_ENA */ -#define WM8915_INL_ENA_WIDTH 1 /* INL_ENA */ -#define WM8915_INR_ENA 0x0010 /* INR_ENA */ -#define WM8915_INR_ENA_MASK 0x0010 /* INR_ENA */ -#define WM8915_INR_ENA_SHIFT 4 /* INR_ENA */ -#define WM8915_INR_ENA_WIDTH 1 /* INR_ENA */ -#define WM8915_LDO2_ENA 0x0002 /* LDO2_ENA */ -#define WM8915_LDO2_ENA_MASK 0x0002 /* LDO2_ENA */ -#define WM8915_LDO2_ENA_SHIFT 1 /* LDO2_ENA */ -#define WM8915_LDO2_ENA_WIDTH 1 /* LDO2_ENA */ - -/* - * R3 (0x03) - Power Management (3) - */ -#define WM8915_DSP2RXL_ENA 0x0800 /* DSP2RXL_ENA */ -#define WM8915_DSP2RXL_ENA_MASK 0x0800 /* DSP2RXL_ENA */ -#define WM8915_DSP2RXL_ENA_SHIFT 11 /* DSP2RXL_ENA */ -#define WM8915_DSP2RXL_ENA_WIDTH 1 /* DSP2RXL_ENA */ -#define WM8915_DSP2RXR_ENA 0x0400 /* DSP2RXR_ENA */ -#define WM8915_DSP2RXR_ENA_MASK 0x0400 /* DSP2RXR_ENA */ -#define WM8915_DSP2RXR_ENA_SHIFT 10 /* DSP2RXR_ENA */ -#define WM8915_DSP2RXR_ENA_WIDTH 1 /* DSP2RXR_ENA */ -#define WM8915_DSP1RXL_ENA 0x0200 /* DSP1RXL_ENA */ -#define WM8915_DSP1RXL_ENA_MASK 0x0200 /* DSP1RXL_ENA */ -#define WM8915_DSP1RXL_ENA_SHIFT 9 /* DSP1RXL_ENA */ -#define WM8915_DSP1RXL_ENA_WIDTH 1 /* DSP1RXL_ENA */ -#define WM8915_DSP1RXR_ENA 0x0100 /* DSP1RXR_ENA */ -#define WM8915_DSP1RXR_ENA_MASK 0x0100 /* DSP1RXR_ENA */ -#define WM8915_DSP1RXR_ENA_SHIFT 8 /* DSP1RXR_ENA */ -#define WM8915_DSP1RXR_ENA_WIDTH 1 /* DSP1RXR_ENA */ -#define WM8915_DMIC2L_ENA 0x0020 /* DMIC2L_ENA */ -#define WM8915_DMIC2L_ENA_MASK 0x0020 /* DMIC2L_ENA */ -#define WM8915_DMIC2L_ENA_SHIFT 5 /* DMIC2L_ENA */ -#define WM8915_DMIC2L_ENA_WIDTH 1 /* DMIC2L_ENA */ -#define WM8915_DMIC2R_ENA 0x0010 /* DMIC2R_ENA */ -#define WM8915_DMIC2R_ENA_MASK 0x0010 /* DMIC2R_ENA */ -#define WM8915_DMIC2R_ENA_SHIFT 4 /* DMIC2R_ENA */ -#define WM8915_DMIC2R_ENA_WIDTH 1 /* DMIC2R_ENA */ -#define WM8915_DMIC1L_ENA 0x0008 /* DMIC1L_ENA */ -#define WM8915_DMIC1L_ENA_MASK 0x0008 /* DMIC1L_ENA */ -#define WM8915_DMIC1L_ENA_SHIFT 3 /* DMIC1L_ENA */ -#define WM8915_DMIC1L_ENA_WIDTH 1 /* DMIC1L_ENA */ -#define WM8915_DMIC1R_ENA 0x0004 /* DMIC1R_ENA */ -#define WM8915_DMIC1R_ENA_MASK 0x0004 /* DMIC1R_ENA */ -#define WM8915_DMIC1R_ENA_SHIFT 2 /* DMIC1R_ENA */ -#define WM8915_DMIC1R_ENA_WIDTH 1 /* DMIC1R_ENA */ -#define WM8915_ADCL_ENA 0x0002 /* ADCL_ENA */ -#define WM8915_ADCL_ENA_MASK 0x0002 /* ADCL_ENA */ -#define WM8915_ADCL_ENA_SHIFT 1 /* ADCL_ENA */ -#define WM8915_ADCL_ENA_WIDTH 1 /* ADCL_ENA */ -#define WM8915_ADCR_ENA 0x0001 /* ADCR_ENA */ -#define WM8915_ADCR_ENA_MASK 0x0001 /* ADCR_ENA */ -#define WM8915_ADCR_ENA_SHIFT 0 /* ADCR_ENA */ -#define WM8915_ADCR_ENA_WIDTH 1 /* ADCR_ENA */ - -/* - * R4 (0x04) - Power Management (4) - */ -#define WM8915_AIF2RX_CHAN1_ENA 0x0200 /* AIF2RX_CHAN1_ENA */ -#define WM8915_AIF2RX_CHAN1_ENA_MASK 0x0200 /* AIF2RX_CHAN1_ENA */ -#define WM8915_AIF2RX_CHAN1_ENA_SHIFT 9 /* AIF2RX_CHAN1_ENA */ -#define WM8915_AIF2RX_CHAN1_ENA_WIDTH 1 /* AIF2RX_CHAN1_ENA */ -#define WM8915_AIF2RX_CHAN0_ENA 0x0100 /* AIF2RX_CHAN0_ENA */ -#define WM8915_AIF2RX_CHAN0_ENA_MASK 0x0100 /* AIF2RX_CHAN0_ENA */ -#define WM8915_AIF2RX_CHAN0_ENA_SHIFT 8 /* AIF2RX_CHAN0_ENA */ -#define WM8915_AIF2RX_CHAN0_ENA_WIDTH 1 /* AIF2RX_CHAN0_ENA */ -#define WM8915_AIF1RX_CHAN5_ENA 0x0020 /* AIF1RX_CHAN5_ENA */ -#define WM8915_AIF1RX_CHAN5_ENA_MASK 0x0020 /* AIF1RX_CHAN5_ENA */ -#define WM8915_AIF1RX_CHAN5_ENA_SHIFT 5 /* AIF1RX_CHAN5_ENA */ -#define WM8915_AIF1RX_CHAN5_ENA_WIDTH 1 /* AIF1RX_CHAN5_ENA */ -#define WM8915_AIF1RX_CHAN4_ENA 0x0010 /* AIF1RX_CHAN4_ENA */ -#define WM8915_AIF1RX_CHAN4_ENA_MASK 0x0010 /* AIF1RX_CHAN4_ENA */ -#define WM8915_AIF1RX_CHAN4_ENA_SHIFT 4 /* AIF1RX_CHAN4_ENA */ -#define WM8915_AIF1RX_CHAN4_ENA_WIDTH 1 /* AIF1RX_CHAN4_ENA */ -#define WM8915_AIF1RX_CHAN3_ENA 0x0008 /* AIF1RX_CHAN3_ENA */ -#define WM8915_AIF1RX_CHAN3_ENA_MASK 0x0008 /* AIF1RX_CHAN3_ENA */ -#define WM8915_AIF1RX_CHAN3_ENA_SHIFT 3 /* AIF1RX_CHAN3_ENA */ -#define WM8915_AIF1RX_CHAN3_ENA_WIDTH 1 /* AIF1RX_CHAN3_ENA */ -#define WM8915_AIF1RX_CHAN2_ENA 0x0004 /* AIF1RX_CHAN2_ENA */ -#define WM8915_AIF1RX_CHAN2_ENA_MASK 0x0004 /* AIF1RX_CHAN2_ENA */ -#define WM8915_AIF1RX_CHAN2_ENA_SHIFT 2 /* AIF1RX_CHAN2_ENA */ -#define WM8915_AIF1RX_CHAN2_ENA_WIDTH 1 /* AIF1RX_CHAN2_ENA */ -#define WM8915_AIF1RX_CHAN1_ENA 0x0002 /* AIF1RX_CHAN1_ENA */ -#define WM8915_AIF1RX_CHAN1_ENA_MASK 0x0002 /* AIF1RX_CHAN1_ENA */ -#define WM8915_AIF1RX_CHAN1_ENA_SHIFT 1 /* AIF1RX_CHAN1_ENA */ -#define WM8915_AIF1RX_CHAN1_ENA_WIDTH 1 /* AIF1RX_CHAN1_ENA */ -#define WM8915_AIF1RX_CHAN0_ENA 0x0001 /* AIF1RX_CHAN0_ENA */ -#define WM8915_AIF1RX_CHAN0_ENA_MASK 0x0001 /* AIF1RX_CHAN0_ENA */ -#define WM8915_AIF1RX_CHAN0_ENA_SHIFT 0 /* AIF1RX_CHAN0_ENA */ -#define WM8915_AIF1RX_CHAN0_ENA_WIDTH 1 /* AIF1RX_CHAN0_ENA */ - -/* - * R5 (0x05) - Power Management (5) - */ -#define WM8915_DSP2TXL_ENA 0x0800 /* DSP2TXL_ENA */ -#define WM8915_DSP2TXL_ENA_MASK 0x0800 /* DSP2TXL_ENA */ -#define WM8915_DSP2TXL_ENA_SHIFT 11 /* DSP2TXL_ENA */ -#define WM8915_DSP2TXL_ENA_WIDTH 1 /* DSP2TXL_ENA */ -#define WM8915_DSP2TXR_ENA 0x0400 /* DSP2TXR_ENA */ -#define WM8915_DSP2TXR_ENA_MASK 0x0400 /* DSP2TXR_ENA */ -#define WM8915_DSP2TXR_ENA_SHIFT 10 /* DSP2TXR_ENA */ -#define WM8915_DSP2TXR_ENA_WIDTH 1 /* DSP2TXR_ENA */ -#define WM8915_DSP1TXL_ENA 0x0200 /* DSP1TXL_ENA */ -#define WM8915_DSP1TXL_ENA_MASK 0x0200 /* DSP1TXL_ENA */ -#define WM8915_DSP1TXL_ENA_SHIFT 9 /* DSP1TXL_ENA */ -#define WM8915_DSP1TXL_ENA_WIDTH 1 /* DSP1TXL_ENA */ -#define WM8915_DSP1TXR_ENA 0x0100 /* DSP1TXR_ENA */ -#define WM8915_DSP1TXR_ENA_MASK 0x0100 /* DSP1TXR_ENA */ -#define WM8915_DSP1TXR_ENA_SHIFT 8 /* DSP1TXR_ENA */ -#define WM8915_DSP1TXR_ENA_WIDTH 1 /* DSP1TXR_ENA */ -#define WM8915_DAC2L_ENA 0x0008 /* DAC2L_ENA */ -#define WM8915_DAC2L_ENA_MASK 0x0008 /* DAC2L_ENA */ -#define WM8915_DAC2L_ENA_SHIFT 3 /* DAC2L_ENA */ -#define WM8915_DAC2L_ENA_WIDTH 1 /* DAC2L_ENA */ -#define WM8915_DAC2R_ENA 0x0004 /* DAC2R_ENA */ -#define WM8915_DAC2R_ENA_MASK 0x0004 /* DAC2R_ENA */ -#define WM8915_DAC2R_ENA_SHIFT 2 /* DAC2R_ENA */ -#define WM8915_DAC2R_ENA_WIDTH 1 /* DAC2R_ENA */ -#define WM8915_DAC1L_ENA 0x0002 /* DAC1L_ENA */ -#define WM8915_DAC1L_ENA_MASK 0x0002 /* DAC1L_ENA */ -#define WM8915_DAC1L_ENA_SHIFT 1 /* DAC1L_ENA */ -#define WM8915_DAC1L_ENA_WIDTH 1 /* DAC1L_ENA */ -#define WM8915_DAC1R_ENA 0x0001 /* DAC1R_ENA */ -#define WM8915_DAC1R_ENA_MASK 0x0001 /* DAC1R_ENA */ -#define WM8915_DAC1R_ENA_SHIFT 0 /* DAC1R_ENA */ -#define WM8915_DAC1R_ENA_WIDTH 1 /* DAC1R_ENA */ - -/* - * R6 (0x06) - Power Management (6) - */ -#define WM8915_AIF2TX_CHAN1_ENA 0x0200 /* AIF2TX_CHAN1_ENA */ -#define WM8915_AIF2TX_CHAN1_ENA_MASK 0x0200 /* AIF2TX_CHAN1_ENA */ -#define WM8915_AIF2TX_CHAN1_ENA_SHIFT 9 /* AIF2TX_CHAN1_ENA */ -#define WM8915_AIF2TX_CHAN1_ENA_WIDTH 1 /* AIF2TX_CHAN1_ENA */ -#define WM8915_AIF2TX_CHAN0_ENA 0x0100 /* AIF2TX_CHAN0_ENA */ -#define WM8915_AIF2TX_CHAN0_ENA_MASK 0x0100 /* AIF2TX_CHAN0_ENA */ -#define WM8915_AIF2TX_CHAN0_ENA_SHIFT 8 /* AIF2TX_CHAN0_ENA */ -#define WM8915_AIF2TX_CHAN0_ENA_WIDTH 1 /* AIF2TX_CHAN0_ENA */ -#define WM8915_AIF1TX_CHAN5_ENA 0x0020 /* AIF1TX_CHAN5_ENA */ -#define WM8915_AIF1TX_CHAN5_ENA_MASK 0x0020 /* AIF1TX_CHAN5_ENA */ -#define WM8915_AIF1TX_CHAN5_ENA_SHIFT 5 /* AIF1TX_CHAN5_ENA */ -#define WM8915_AIF1TX_CHAN5_ENA_WIDTH 1 /* AIF1TX_CHAN5_ENA */ -#define WM8915_AIF1TX_CHAN4_ENA 0x0010 /* AIF1TX_CHAN4_ENA */ -#define WM8915_AIF1TX_CHAN4_ENA_MASK 0x0010 /* AIF1TX_CHAN4_ENA */ -#define WM8915_AIF1TX_CHAN4_ENA_SHIFT 4 /* AIF1TX_CHAN4_ENA */ -#define WM8915_AIF1TX_CHAN4_ENA_WIDTH 1 /* AIF1TX_CHAN4_ENA */ -#define WM8915_AIF1TX_CHAN3_ENA 0x0008 /* AIF1TX_CHAN3_ENA */ -#define WM8915_AIF1TX_CHAN3_ENA_MASK 0x0008 /* AIF1TX_CHAN3_ENA */ -#define WM8915_AIF1TX_CHAN3_ENA_SHIFT 3 /* AIF1TX_CHAN3_ENA */ -#define WM8915_AIF1TX_CHAN3_ENA_WIDTH 1 /* AIF1TX_CHAN3_ENA */ -#define WM8915_AIF1TX_CHAN2_ENA 0x0004 /* AIF1TX_CHAN2_ENA */ -#define WM8915_AIF1TX_CHAN2_ENA_MASK 0x0004 /* AIF1TX_CHAN2_ENA */ -#define WM8915_AIF1TX_CHAN2_ENA_SHIFT 2 /* AIF1TX_CHAN2_ENA */ -#define WM8915_AIF1TX_CHAN2_ENA_WIDTH 1 /* AIF1TX_CHAN2_ENA */ -#define WM8915_AIF1TX_CHAN1_ENA 0x0002 /* AIF1TX_CHAN1_ENA */ -#define WM8915_AIF1TX_CHAN1_ENA_MASK 0x0002 /* AIF1TX_CHAN1_ENA */ -#define WM8915_AIF1TX_CHAN1_ENA_SHIFT 1 /* AIF1TX_CHAN1_ENA */ -#define WM8915_AIF1TX_CHAN1_ENA_WIDTH 1 /* AIF1TX_CHAN1_ENA */ -#define WM8915_AIF1TX_CHAN0_ENA 0x0001 /* AIF1TX_CHAN0_ENA */ -#define WM8915_AIF1TX_CHAN0_ENA_MASK 0x0001 /* AIF1TX_CHAN0_ENA */ -#define WM8915_AIF1TX_CHAN0_ENA_SHIFT 0 /* AIF1TX_CHAN0_ENA */ -#define WM8915_AIF1TX_CHAN0_ENA_WIDTH 1 /* AIF1TX_CHAN0_ENA */ - -/* - * R7 (0x07) - Power Management (7) - */ -#define WM8915_DMIC2_FN 0x0200 /* DMIC2_FN */ -#define WM8915_DMIC2_FN_MASK 0x0200 /* DMIC2_FN */ -#define WM8915_DMIC2_FN_SHIFT 9 /* DMIC2_FN */ -#define WM8915_DMIC2_FN_WIDTH 1 /* DMIC2_FN */ -#define WM8915_DMIC1_FN 0x0100 /* DMIC1_FN */ -#define WM8915_DMIC1_FN_MASK 0x0100 /* DMIC1_FN */ -#define WM8915_DMIC1_FN_SHIFT 8 /* DMIC1_FN */ -#define WM8915_DMIC1_FN_WIDTH 1 /* DMIC1_FN */ -#define WM8915_ADC_DMIC_DSP2R_ENA 0x0080 /* ADC_DMIC_DSP2R_ENA */ -#define WM8915_ADC_DMIC_DSP2R_ENA_MASK 0x0080 /* ADC_DMIC_DSP2R_ENA */ -#define WM8915_ADC_DMIC_DSP2R_ENA_SHIFT 7 /* ADC_DMIC_DSP2R_ENA */ -#define WM8915_ADC_DMIC_DSP2R_ENA_WIDTH 1 /* ADC_DMIC_DSP2R_ENA */ -#define WM8915_ADC_DMIC_DSP2L_ENA 0x0040 /* ADC_DMIC_DSP2L_ENA */ -#define WM8915_ADC_DMIC_DSP2L_ENA_MASK 0x0040 /* ADC_DMIC_DSP2L_ENA */ -#define WM8915_ADC_DMIC_DSP2L_ENA_SHIFT 6 /* ADC_DMIC_DSP2L_ENA */ -#define WM8915_ADC_DMIC_DSP2L_ENA_WIDTH 1 /* ADC_DMIC_DSP2L_ENA */ -#define WM8915_ADC_DMIC_SRC2_MASK 0x0030 /* ADC_DMIC_SRC2 - [5:4] */ -#define WM8915_ADC_DMIC_SRC2_SHIFT 4 /* ADC_DMIC_SRC2 - [5:4] */ -#define WM8915_ADC_DMIC_SRC2_WIDTH 2 /* ADC_DMIC_SRC2 - [5:4] */ -#define WM8915_ADC_DMIC_DSP1R_ENA 0x0008 /* ADC_DMIC_DSP1R_ENA */ -#define WM8915_ADC_DMIC_DSP1R_ENA_MASK 0x0008 /* ADC_DMIC_DSP1R_ENA */ -#define WM8915_ADC_DMIC_DSP1R_ENA_SHIFT 3 /* ADC_DMIC_DSP1R_ENA */ -#define WM8915_ADC_DMIC_DSP1R_ENA_WIDTH 1 /* ADC_DMIC_DSP1R_ENA */ -#define WM8915_ADC_DMIC_DSP1L_ENA 0x0004 /* ADC_DMIC_DSP1L_ENA */ -#define WM8915_ADC_DMIC_DSP1L_ENA_MASK 0x0004 /* ADC_DMIC_DSP1L_ENA */ -#define WM8915_ADC_DMIC_DSP1L_ENA_SHIFT 2 /* ADC_DMIC_DSP1L_ENA */ -#define WM8915_ADC_DMIC_DSP1L_ENA_WIDTH 1 /* ADC_DMIC_DSP1L_ENA */ -#define WM8915_ADC_DMIC_SRC1_MASK 0x0003 /* ADC_DMIC_SRC1 - [1:0] */ -#define WM8915_ADC_DMIC_SRC1_SHIFT 0 /* ADC_DMIC_SRC1 - [1:0] */ -#define WM8915_ADC_DMIC_SRC1_WIDTH 2 /* ADC_DMIC_SRC1 - [1:0] */ - -/* - * R8 (0x08) - Power Management (8) - */ -#define WM8915_AIF2TX_SRC_MASK 0x00C0 /* AIF2TX_SRC - [7:6] */ -#define WM8915_AIF2TX_SRC_SHIFT 6 /* AIF2TX_SRC - [7:6] */ -#define WM8915_AIF2TX_SRC_WIDTH 2 /* AIF2TX_SRC - [7:6] */ -#define WM8915_DSP2RX_SRC 0x0010 /* DSP2RX_SRC */ -#define WM8915_DSP2RX_SRC_MASK 0x0010 /* DSP2RX_SRC */ -#define WM8915_DSP2RX_SRC_SHIFT 4 /* DSP2RX_SRC */ -#define WM8915_DSP2RX_SRC_WIDTH 1 /* DSP2RX_SRC */ -#define WM8915_DSP1RX_SRC 0x0001 /* DSP1RX_SRC */ -#define WM8915_DSP1RX_SRC_MASK 0x0001 /* DSP1RX_SRC */ -#define WM8915_DSP1RX_SRC_SHIFT 0 /* DSP1RX_SRC */ -#define WM8915_DSP1RX_SRC_WIDTH 1 /* DSP1RX_SRC */ - -/* - * R16 (0x10) - Left Line Input Volume - */ -#define WM8915_IN1_VU 0x0080 /* IN1_VU */ -#define WM8915_IN1_VU_MASK 0x0080 /* IN1_VU */ -#define WM8915_IN1_VU_SHIFT 7 /* IN1_VU */ -#define WM8915_IN1_VU_WIDTH 1 /* IN1_VU */ -#define WM8915_IN1L_ZC 0x0020 /* IN1L_ZC */ -#define WM8915_IN1L_ZC_MASK 0x0020 /* IN1L_ZC */ -#define WM8915_IN1L_ZC_SHIFT 5 /* IN1L_ZC */ -#define WM8915_IN1L_ZC_WIDTH 1 /* IN1L_ZC */ -#define WM8915_IN1L_VOL_MASK 0x001F /* IN1L_VOL - [4:0] */ -#define WM8915_IN1L_VOL_SHIFT 0 /* IN1L_VOL - [4:0] */ -#define WM8915_IN1L_VOL_WIDTH 5 /* IN1L_VOL - [4:0] */ - -/* - * R17 (0x11) - Right Line Input Volume - */ -#define WM8915_IN1_VU 0x0080 /* IN1_VU */ -#define WM8915_IN1_VU_MASK 0x0080 /* IN1_VU */ -#define WM8915_IN1_VU_SHIFT 7 /* IN1_VU */ -#define WM8915_IN1_VU_WIDTH 1 /* IN1_VU */ -#define WM8915_IN1R_ZC 0x0020 /* IN1R_ZC */ -#define WM8915_IN1R_ZC_MASK 0x0020 /* IN1R_ZC */ -#define WM8915_IN1R_ZC_SHIFT 5 /* IN1R_ZC */ -#define WM8915_IN1R_ZC_WIDTH 1 /* IN1R_ZC */ -#define WM8915_IN1R_VOL_MASK 0x001F /* IN1R_VOL - [4:0] */ -#define WM8915_IN1R_VOL_SHIFT 0 /* IN1R_VOL - [4:0] */ -#define WM8915_IN1R_VOL_WIDTH 5 /* IN1R_VOL - [4:0] */ - -/* - * R18 (0x12) - Line Input Control - */ -#define WM8915_INL_MODE_MASK 0x000C /* INL_MODE - [3:2] */ -#define WM8915_INL_MODE_SHIFT 2 /* INL_MODE - [3:2] */ -#define WM8915_INL_MODE_WIDTH 2 /* INL_MODE - [3:2] */ -#define WM8915_INR_MODE_MASK 0x0003 /* INR_MODE - [1:0] */ -#define WM8915_INR_MODE_SHIFT 0 /* INR_MODE - [1:0] */ -#define WM8915_INR_MODE_WIDTH 2 /* INR_MODE - [1:0] */ - -/* - * R21 (0x15) - DAC1 HPOUT1 Volume - */ -#define WM8915_DAC1R_HPOUT1R_VOL_MASK 0x00F0 /* DAC1R_HPOUT1R_VOL - [7:4] */ -#define WM8915_DAC1R_HPOUT1R_VOL_SHIFT 4 /* DAC1R_HPOUT1R_VOL - [7:4] */ -#define WM8915_DAC1R_HPOUT1R_VOL_WIDTH 4 /* DAC1R_HPOUT1R_VOL - [7:4] */ -#define WM8915_DAC1L_HPOUT1L_VOL_MASK 0x000F /* DAC1L_HPOUT1L_VOL - [3:0] */ -#define WM8915_DAC1L_HPOUT1L_VOL_SHIFT 0 /* DAC1L_HPOUT1L_VOL - [3:0] */ -#define WM8915_DAC1L_HPOUT1L_VOL_WIDTH 4 /* DAC1L_HPOUT1L_VOL - [3:0] */ - -/* - * R22 (0x16) - DAC2 HPOUT2 Volume - */ -#define WM8915_DAC2R_HPOUT2R_VOL_MASK 0x00F0 /* DAC2R_HPOUT2R_VOL - [7:4] */ -#define WM8915_DAC2R_HPOUT2R_VOL_SHIFT 4 /* DAC2R_HPOUT2R_VOL - [7:4] */ -#define WM8915_DAC2R_HPOUT2R_VOL_WIDTH 4 /* DAC2R_HPOUT2R_VOL - [7:4] */ -#define WM8915_DAC2L_HPOUT2L_VOL_MASK 0x000F /* DAC2L_HPOUT2L_VOL - [3:0] */ -#define WM8915_DAC2L_HPOUT2L_VOL_SHIFT 0 /* DAC2L_HPOUT2L_VOL - [3:0] */ -#define WM8915_DAC2L_HPOUT2L_VOL_WIDTH 4 /* DAC2L_HPOUT2L_VOL - [3:0] */ - -/* - * R24 (0x18) - DAC1 Left Volume - */ -#define WM8915_DAC1L_MUTE 0x0200 /* DAC1L_MUTE */ -#define WM8915_DAC1L_MUTE_MASK 0x0200 /* DAC1L_MUTE */ -#define WM8915_DAC1L_MUTE_SHIFT 9 /* DAC1L_MUTE */ -#define WM8915_DAC1L_MUTE_WIDTH 1 /* DAC1L_MUTE */ -#define WM8915_DAC1_VU 0x0100 /* DAC1_VU */ -#define WM8915_DAC1_VU_MASK 0x0100 /* DAC1_VU */ -#define WM8915_DAC1_VU_SHIFT 8 /* DAC1_VU */ -#define WM8915_DAC1_VU_WIDTH 1 /* DAC1_VU */ -#define WM8915_DAC1L_VOL_MASK 0x00FF /* DAC1L_VOL - [7:0] */ -#define WM8915_DAC1L_VOL_SHIFT 0 /* DAC1L_VOL - [7:0] */ -#define WM8915_DAC1L_VOL_WIDTH 8 /* DAC1L_VOL - [7:0] */ - -/* - * R25 (0x19) - DAC1 Right Volume - */ -#define WM8915_DAC1R_MUTE 0x0200 /* DAC1R_MUTE */ -#define WM8915_DAC1R_MUTE_MASK 0x0200 /* DAC1R_MUTE */ -#define WM8915_DAC1R_MUTE_SHIFT 9 /* DAC1R_MUTE */ -#define WM8915_DAC1R_MUTE_WIDTH 1 /* DAC1R_MUTE */ -#define WM8915_DAC1_VU 0x0100 /* DAC1_VU */ -#define WM8915_DAC1_VU_MASK 0x0100 /* DAC1_VU */ -#define WM8915_DAC1_VU_SHIFT 8 /* DAC1_VU */ -#define WM8915_DAC1_VU_WIDTH 1 /* DAC1_VU */ -#define WM8915_DAC1R_VOL_MASK 0x00FF /* DAC1R_VOL - [7:0] */ -#define WM8915_DAC1R_VOL_SHIFT 0 /* DAC1R_VOL - [7:0] */ -#define WM8915_DAC1R_VOL_WIDTH 8 /* DAC1R_VOL - [7:0] */ - -/* - * R26 (0x1A) - DAC2 Left Volume - */ -#define WM8915_DAC2L_MUTE 0x0200 /* DAC2L_MUTE */ -#define WM8915_DAC2L_MUTE_MASK 0x0200 /* DAC2L_MUTE */ -#define WM8915_DAC2L_MUTE_SHIFT 9 /* DAC2L_MUTE */ -#define WM8915_DAC2L_MUTE_WIDTH 1 /* DAC2L_MUTE */ -#define WM8915_DAC2_VU 0x0100 /* DAC2_VU */ -#define WM8915_DAC2_VU_MASK 0x0100 /* DAC2_VU */ -#define WM8915_DAC2_VU_SHIFT 8 /* DAC2_VU */ -#define WM8915_DAC2_VU_WIDTH 1 /* DAC2_VU */ -#define WM8915_DAC2L_VOL_MASK 0x00FF /* DAC2L_VOL - [7:0] */ -#define WM8915_DAC2L_VOL_SHIFT 0 /* DAC2L_VOL - [7:0] */ -#define WM8915_DAC2L_VOL_WIDTH 8 /* DAC2L_VOL - [7:0] */ - -/* - * R27 (0x1B) - DAC2 Right Volume - */ -#define WM8915_DAC2R_MUTE 0x0200 /* DAC2R_MUTE */ -#define WM8915_DAC2R_MUTE_MASK 0x0200 /* DAC2R_MUTE */ -#define WM8915_DAC2R_MUTE_SHIFT 9 /* DAC2R_MUTE */ -#define WM8915_DAC2R_MUTE_WIDTH 1 /* DAC2R_MUTE */ -#define WM8915_DAC2_VU 0x0100 /* DAC2_VU */ -#define WM8915_DAC2_VU_MASK 0x0100 /* DAC2_VU */ -#define WM8915_DAC2_VU_SHIFT 8 /* DAC2_VU */ -#define WM8915_DAC2_VU_WIDTH 1 /* DAC2_VU */ -#define WM8915_DAC2R_VOL_MASK 0x00FF /* DAC2R_VOL - [7:0] */ -#define WM8915_DAC2R_VOL_SHIFT 0 /* DAC2R_VOL - [7:0] */ -#define WM8915_DAC2R_VOL_WIDTH 8 /* DAC2R_VOL - [7:0] */ - -/* - * R28 (0x1C) - Output1 Left Volume - */ -#define WM8915_DAC1_VU 0x0100 /* DAC1_VU */ -#define WM8915_DAC1_VU_MASK 0x0100 /* DAC1_VU */ -#define WM8915_DAC1_VU_SHIFT 8 /* DAC1_VU */ -#define WM8915_DAC1_VU_WIDTH 1 /* DAC1_VU */ -#define WM8915_HPOUT1L_ZC 0x0080 /* HPOUT1L_ZC */ -#define WM8915_HPOUT1L_ZC_MASK 0x0080 /* HPOUT1L_ZC */ -#define WM8915_HPOUT1L_ZC_SHIFT 7 /* HPOUT1L_ZC */ -#define WM8915_HPOUT1L_ZC_WIDTH 1 /* HPOUT1L_ZC */ -#define WM8915_HPOUT1L_VOL_MASK 0x000F /* HPOUT1L_VOL - [3:0] */ -#define WM8915_HPOUT1L_VOL_SHIFT 0 /* HPOUT1L_VOL - [3:0] */ -#define WM8915_HPOUT1L_VOL_WIDTH 4 /* HPOUT1L_VOL - [3:0] */ - -/* - * R29 (0x1D) - Output1 Right Volume - */ -#define WM8915_DAC1_VU 0x0100 /* DAC1_VU */ -#define WM8915_DAC1_VU_MASK 0x0100 /* DAC1_VU */ -#define WM8915_DAC1_VU_SHIFT 8 /* DAC1_VU */ -#define WM8915_DAC1_VU_WIDTH 1 /* DAC1_VU */ -#define WM8915_HPOUT1R_ZC 0x0080 /* HPOUT1R_ZC */ -#define WM8915_HPOUT1R_ZC_MASK 0x0080 /* HPOUT1R_ZC */ -#define WM8915_HPOUT1R_ZC_SHIFT 7 /* HPOUT1R_ZC */ -#define WM8915_HPOUT1R_ZC_WIDTH 1 /* HPOUT1R_ZC */ -#define WM8915_HPOUT1R_VOL_MASK 0x000F /* HPOUT1R_VOL - [3:0] */ -#define WM8915_HPOUT1R_VOL_SHIFT 0 /* HPOUT1R_VOL - [3:0] */ -#define WM8915_HPOUT1R_VOL_WIDTH 4 /* HPOUT1R_VOL - [3:0] */ - -/* - * R30 (0x1E) - Output2 Left Volume - */ -#define WM8915_DAC2_VU 0x0100 /* DAC2_VU */ -#define WM8915_DAC2_VU_MASK 0x0100 /* DAC2_VU */ -#define WM8915_DAC2_VU_SHIFT 8 /* DAC2_VU */ -#define WM8915_DAC2_VU_WIDTH 1 /* DAC2_VU */ -#define WM8915_HPOUT2L_ZC 0x0080 /* HPOUT2L_ZC */ -#define WM8915_HPOUT2L_ZC_MASK 0x0080 /* HPOUT2L_ZC */ -#define WM8915_HPOUT2L_ZC_SHIFT 7 /* HPOUT2L_ZC */ -#define WM8915_HPOUT2L_ZC_WIDTH 1 /* HPOUT2L_ZC */ -#define WM8915_HPOUT2L_VOL_MASK 0x000F /* HPOUT2L_VOL - [3:0] */ -#define WM8915_HPOUT2L_VOL_SHIFT 0 /* HPOUT2L_VOL - [3:0] */ -#define WM8915_HPOUT2L_VOL_WIDTH 4 /* HPOUT2L_VOL - [3:0] */ - -/* - * R31 (0x1F) - Output2 Right Volume - */ -#define WM8915_DAC2_VU 0x0100 /* DAC2_VU */ -#define WM8915_DAC2_VU_MASK 0x0100 /* DAC2_VU */ -#define WM8915_DAC2_VU_SHIFT 8 /* DAC2_VU */ -#define WM8915_DAC2_VU_WIDTH 1 /* DAC2_VU */ -#define WM8915_HPOUT2R_ZC 0x0080 /* HPOUT2R_ZC */ -#define WM8915_HPOUT2R_ZC_MASK 0x0080 /* HPOUT2R_ZC */ -#define WM8915_HPOUT2R_ZC_SHIFT 7 /* HPOUT2R_ZC */ -#define WM8915_HPOUT2R_ZC_WIDTH 1 /* HPOUT2R_ZC */ -#define WM8915_HPOUT2R_VOL_MASK 0x000F /* HPOUT2R_VOL - [3:0] */ -#define WM8915_HPOUT2R_VOL_SHIFT 0 /* HPOUT2R_VOL - [3:0] */ -#define WM8915_HPOUT2R_VOL_WIDTH 4 /* HPOUT2R_VOL - [3:0] */ - -/* - * R32 (0x20) - MICBIAS (1) - */ -#define WM8915_MICB1_RATE 0x0020 /* MICB1_RATE */ -#define WM8915_MICB1_RATE_MASK 0x0020 /* MICB1_RATE */ -#define WM8915_MICB1_RATE_SHIFT 5 /* MICB1_RATE */ -#define WM8915_MICB1_RATE_WIDTH 1 /* MICB1_RATE */ -#define WM8915_MICB1_MODE 0x0010 /* MICB1_MODE */ -#define WM8915_MICB1_MODE_MASK 0x0010 /* MICB1_MODE */ -#define WM8915_MICB1_MODE_SHIFT 4 /* MICB1_MODE */ -#define WM8915_MICB1_MODE_WIDTH 1 /* MICB1_MODE */ -#define WM8915_MICB1_LVL_MASK 0x000E /* MICB1_LVL - [3:1] */ -#define WM8915_MICB1_LVL_SHIFT 1 /* MICB1_LVL - [3:1] */ -#define WM8915_MICB1_LVL_WIDTH 3 /* MICB1_LVL - [3:1] */ -#define WM8915_MICB1_DISCH 0x0001 /* MICB1_DISCH */ -#define WM8915_MICB1_DISCH_MASK 0x0001 /* MICB1_DISCH */ -#define WM8915_MICB1_DISCH_SHIFT 0 /* MICB1_DISCH */ -#define WM8915_MICB1_DISCH_WIDTH 1 /* MICB1_DISCH */ - -/* - * R33 (0x21) - MICBIAS (2) - */ -#define WM8915_MICB2_RATE 0x0020 /* MICB2_RATE */ -#define WM8915_MICB2_RATE_MASK 0x0020 /* MICB2_RATE */ -#define WM8915_MICB2_RATE_SHIFT 5 /* MICB2_RATE */ -#define WM8915_MICB2_RATE_WIDTH 1 /* MICB2_RATE */ -#define WM8915_MICB2_MODE 0x0010 /* MICB2_MODE */ -#define WM8915_MICB2_MODE_MASK 0x0010 /* MICB2_MODE */ -#define WM8915_MICB2_MODE_SHIFT 4 /* MICB2_MODE */ -#define WM8915_MICB2_MODE_WIDTH 1 /* MICB2_MODE */ -#define WM8915_MICB2_LVL_MASK 0x000E /* MICB2_LVL - [3:1] */ -#define WM8915_MICB2_LVL_SHIFT 1 /* MICB2_LVL - [3:1] */ -#define WM8915_MICB2_LVL_WIDTH 3 /* MICB2_LVL - [3:1] */ -#define WM8915_MICB2_DISCH 0x0001 /* MICB2_DISCH */ -#define WM8915_MICB2_DISCH_MASK 0x0001 /* MICB2_DISCH */ -#define WM8915_MICB2_DISCH_SHIFT 0 /* MICB2_DISCH */ -#define WM8915_MICB2_DISCH_WIDTH 1 /* MICB2_DISCH */ - -/* - * R40 (0x28) - LDO 1 - */ -#define WM8915_LDO1_MODE 0x0020 /* LDO1_MODE */ -#define WM8915_LDO1_MODE_MASK 0x0020 /* LDO1_MODE */ -#define WM8915_LDO1_MODE_SHIFT 5 /* LDO1_MODE */ -#define WM8915_LDO1_MODE_WIDTH 1 /* LDO1_MODE */ -#define WM8915_LDO1_VSEL_MASK 0x0006 /* LDO1_VSEL - [2:1] */ -#define WM8915_LDO1_VSEL_SHIFT 1 /* LDO1_VSEL - [2:1] */ -#define WM8915_LDO1_VSEL_WIDTH 2 /* LDO1_VSEL - [2:1] */ -#define WM8915_LDO1_DISCH 0x0001 /* LDO1_DISCH */ -#define WM8915_LDO1_DISCH_MASK 0x0001 /* LDO1_DISCH */ -#define WM8915_LDO1_DISCH_SHIFT 0 /* LDO1_DISCH */ -#define WM8915_LDO1_DISCH_WIDTH 1 /* LDO1_DISCH */ - -/* - * R41 (0x29) - LDO 2 - */ -#define WM8915_LDO2_MODE 0x0020 /* LDO2_MODE */ -#define WM8915_LDO2_MODE_MASK 0x0020 /* LDO2_MODE */ -#define WM8915_LDO2_MODE_SHIFT 5 /* LDO2_MODE */ -#define WM8915_LDO2_MODE_WIDTH 1 /* LDO2_MODE */ -#define WM8915_LDO2_VSEL_MASK 0x001E /* LDO2_VSEL - [4:1] */ -#define WM8915_LDO2_VSEL_SHIFT 1 /* LDO2_VSEL - [4:1] */ -#define WM8915_LDO2_VSEL_WIDTH 4 /* LDO2_VSEL - [4:1] */ -#define WM8915_LDO2_DISCH 0x0001 /* LDO2_DISCH */ -#define WM8915_LDO2_DISCH_MASK 0x0001 /* LDO2_DISCH */ -#define WM8915_LDO2_DISCH_SHIFT 0 /* LDO2_DISCH */ -#define WM8915_LDO2_DISCH_WIDTH 1 /* LDO2_DISCH */ - -/* - * R48 (0x30) - Accessory Detect Mode 1 - */ -#define WM8915_JD_MODE_MASK 0x0003 /* JD_MODE - [1:0] */ -#define WM8915_JD_MODE_SHIFT 0 /* JD_MODE - [1:0] */ -#define WM8915_JD_MODE_WIDTH 2 /* JD_MODE - [1:0] */ - -/* - * R49 (0x31) - Accessory Detect Mode 2 - */ -#define WM8915_HPOUT1FB_SRC 0x0004 /* HPOUT1FB_SRC */ -#define WM8915_HPOUT1FB_SRC_MASK 0x0004 /* HPOUT1FB_SRC */ -#define WM8915_HPOUT1FB_SRC_SHIFT 2 /* HPOUT1FB_SRC */ -#define WM8915_HPOUT1FB_SRC_WIDTH 1 /* HPOUT1FB_SRC */ -#define WM8915_MICD_SRC 0x0002 /* MICD_SRC */ -#define WM8915_MICD_SRC_MASK 0x0002 /* MICD_SRC */ -#define WM8915_MICD_SRC_SHIFT 1 /* MICD_SRC */ -#define WM8915_MICD_SRC_WIDTH 1 /* MICD_SRC */ -#define WM8915_MICD_BIAS_SRC 0x0001 /* MICD_BIAS_SRC */ -#define WM8915_MICD_BIAS_SRC_MASK 0x0001 /* MICD_BIAS_SRC */ -#define WM8915_MICD_BIAS_SRC_SHIFT 0 /* MICD_BIAS_SRC */ -#define WM8915_MICD_BIAS_SRC_WIDTH 1 /* MICD_BIAS_SRC */ - -/* - * R52 (0x34) - Headphone Detect 1 - */ -#define WM8915_HP_HOLDTIME_MASK 0x00E0 /* HP_HOLDTIME - [7:5] */ -#define WM8915_HP_HOLDTIME_SHIFT 5 /* HP_HOLDTIME - [7:5] */ -#define WM8915_HP_HOLDTIME_WIDTH 3 /* HP_HOLDTIME - [7:5] */ -#define WM8915_HP_CLK_DIV_MASK 0x0018 /* HP_CLK_DIV - [4:3] */ -#define WM8915_HP_CLK_DIV_SHIFT 3 /* HP_CLK_DIV - [4:3] */ -#define WM8915_HP_CLK_DIV_WIDTH 2 /* HP_CLK_DIV - [4:3] */ -#define WM8915_HP_STEP_SIZE 0x0002 /* HP_STEP_SIZE */ -#define WM8915_HP_STEP_SIZE_MASK 0x0002 /* HP_STEP_SIZE */ -#define WM8915_HP_STEP_SIZE_SHIFT 1 /* HP_STEP_SIZE */ -#define WM8915_HP_STEP_SIZE_WIDTH 1 /* HP_STEP_SIZE */ -#define WM8915_HP_POLL 0x0001 /* HP_POLL */ -#define WM8915_HP_POLL_MASK 0x0001 /* HP_POLL */ -#define WM8915_HP_POLL_SHIFT 0 /* HP_POLL */ -#define WM8915_HP_POLL_WIDTH 1 /* HP_POLL */ - -/* - * R53 (0x35) - Headphone Detect 2 - */ -#define WM8915_HP_DONE 0x0080 /* HP_DONE */ -#define WM8915_HP_DONE_MASK 0x0080 /* HP_DONE */ -#define WM8915_HP_DONE_SHIFT 7 /* HP_DONE */ -#define WM8915_HP_DONE_WIDTH 1 /* HP_DONE */ -#define WM8915_HP_LVL_MASK 0x007F /* HP_LVL - [6:0] */ -#define WM8915_HP_LVL_SHIFT 0 /* HP_LVL - [6:0] */ -#define WM8915_HP_LVL_WIDTH 7 /* HP_LVL - [6:0] */ - -/* - * R56 (0x38) - Mic Detect 1 - */ -#define WM8915_MICD_BIAS_STARTTIME_MASK 0xF000 /* MICD_BIAS_STARTTIME - [15:12] */ -#define WM8915_MICD_BIAS_STARTTIME_SHIFT 12 /* MICD_BIAS_STARTTIME - [15:12] */ -#define WM8915_MICD_BIAS_STARTTIME_WIDTH 4 /* MICD_BIAS_STARTTIME - [15:12] */ -#define WM8915_MICD_RATE_MASK 0x0F00 /* MICD_RATE - [11:8] */ -#define WM8915_MICD_RATE_SHIFT 8 /* MICD_RATE - [11:8] */ -#define WM8915_MICD_RATE_WIDTH 4 /* MICD_RATE - [11:8] */ -#define WM8915_MICD_DBTIME 0x0002 /* MICD_DBTIME */ -#define WM8915_MICD_DBTIME_MASK 0x0002 /* MICD_DBTIME */ -#define WM8915_MICD_DBTIME_SHIFT 1 /* MICD_DBTIME */ -#define WM8915_MICD_DBTIME_WIDTH 1 /* MICD_DBTIME */ -#define WM8915_MICD_ENA 0x0001 /* MICD_ENA */ -#define WM8915_MICD_ENA_MASK 0x0001 /* MICD_ENA */ -#define WM8915_MICD_ENA_SHIFT 0 /* MICD_ENA */ -#define WM8915_MICD_ENA_WIDTH 1 /* MICD_ENA */ - -/* - * R57 (0x39) - Mic Detect 2 - */ -#define WM8915_MICD_LVL_SEL_MASK 0x00FF /* MICD_LVL_SEL - [7:0] */ -#define WM8915_MICD_LVL_SEL_SHIFT 0 /* MICD_LVL_SEL - [7:0] */ -#define WM8915_MICD_LVL_SEL_WIDTH 8 /* MICD_LVL_SEL - [7:0] */ - -/* - * R58 (0x3A) - Mic Detect 3 - */ -#define WM8915_MICD_LVL_MASK 0x07FC /* MICD_LVL - [10:2] */ -#define WM8915_MICD_LVL_SHIFT 2 /* MICD_LVL - [10:2] */ -#define WM8915_MICD_LVL_WIDTH 9 /* MICD_LVL - [10:2] */ -#define WM8915_MICD_VALID 0x0002 /* MICD_VALID */ -#define WM8915_MICD_VALID_MASK 0x0002 /* MICD_VALID */ -#define WM8915_MICD_VALID_SHIFT 1 /* MICD_VALID */ -#define WM8915_MICD_VALID_WIDTH 1 /* MICD_VALID */ -#define WM8915_MICD_STS 0x0001 /* MICD_STS */ -#define WM8915_MICD_STS_MASK 0x0001 /* MICD_STS */ -#define WM8915_MICD_STS_SHIFT 0 /* MICD_STS */ -#define WM8915_MICD_STS_WIDTH 1 /* MICD_STS */ - -/* - * R64 (0x40) - Charge Pump (1) - */ -#define WM8915_CP_ENA 0x8000 /* CP_ENA */ -#define WM8915_CP_ENA_MASK 0x8000 /* CP_ENA */ -#define WM8915_CP_ENA_SHIFT 15 /* CP_ENA */ -#define WM8915_CP_ENA_WIDTH 1 /* CP_ENA */ - -/* - * R65 (0x41) - Charge Pump (2) - */ -#define WM8915_CP_DISCH 0x8000 /* CP_DISCH */ -#define WM8915_CP_DISCH_MASK 0x8000 /* CP_DISCH */ -#define WM8915_CP_DISCH_SHIFT 15 /* CP_DISCH */ -#define WM8915_CP_DISCH_WIDTH 1 /* CP_DISCH */ - -/* - * R80 (0x50) - DC Servo (1) - */ -#define WM8915_DCS_ENA_CHAN_3 0x0008 /* DCS_ENA_CHAN_3 */ -#define WM8915_DCS_ENA_CHAN_3_MASK 0x0008 /* DCS_ENA_CHAN_3 */ -#define WM8915_DCS_ENA_CHAN_3_SHIFT 3 /* DCS_ENA_CHAN_3 */ -#define WM8915_DCS_ENA_CHAN_3_WIDTH 1 /* DCS_ENA_CHAN_3 */ -#define WM8915_DCS_ENA_CHAN_2 0x0004 /* DCS_ENA_CHAN_2 */ -#define WM8915_DCS_ENA_CHAN_2_MASK 0x0004 /* DCS_ENA_CHAN_2 */ -#define WM8915_DCS_ENA_CHAN_2_SHIFT 2 /* DCS_ENA_CHAN_2 */ -#define WM8915_DCS_ENA_CHAN_2_WIDTH 1 /* DCS_ENA_CHAN_2 */ -#define WM8915_DCS_ENA_CHAN_1 0x0002 /* DCS_ENA_CHAN_1 */ -#define WM8915_DCS_ENA_CHAN_1_MASK 0x0002 /* DCS_ENA_CHAN_1 */ -#define WM8915_DCS_ENA_CHAN_1_SHIFT 1 /* DCS_ENA_CHAN_1 */ -#define WM8915_DCS_ENA_CHAN_1_WIDTH 1 /* DCS_ENA_CHAN_1 */ -#define WM8915_DCS_ENA_CHAN_0 0x0001 /* DCS_ENA_CHAN_0 */ -#define WM8915_DCS_ENA_CHAN_0_MASK 0x0001 /* DCS_ENA_CHAN_0 */ -#define WM8915_DCS_ENA_CHAN_0_SHIFT 0 /* DCS_ENA_CHAN_0 */ -#define WM8915_DCS_ENA_CHAN_0_WIDTH 1 /* DCS_ENA_CHAN_0 */ - -/* - * R81 (0x51) - DC Servo (2) - */ -#define WM8915_DCS_TRIG_SINGLE_3 0x8000 /* DCS_TRIG_SINGLE_3 */ -#define WM8915_DCS_TRIG_SINGLE_3_MASK 0x8000 /* DCS_TRIG_SINGLE_3 */ -#define WM8915_DCS_TRIG_SINGLE_3_SHIFT 15 /* DCS_TRIG_SINGLE_3 */ -#define WM8915_DCS_TRIG_SINGLE_3_WIDTH 1 /* DCS_TRIG_SINGLE_3 */ -#define WM8915_DCS_TRIG_SINGLE_2 0x4000 /* DCS_TRIG_SINGLE_2 */ -#define WM8915_DCS_TRIG_SINGLE_2_MASK 0x4000 /* DCS_TRIG_SINGLE_2 */ -#define WM8915_DCS_TRIG_SINGLE_2_SHIFT 14 /* DCS_TRIG_SINGLE_2 */ -#define WM8915_DCS_TRIG_SINGLE_2_WIDTH 1 /* DCS_TRIG_SINGLE_2 */ -#define WM8915_DCS_TRIG_SINGLE_1 0x2000 /* DCS_TRIG_SINGLE_1 */ -#define WM8915_DCS_TRIG_SINGLE_1_MASK 0x2000 /* DCS_TRIG_SINGLE_1 */ -#define WM8915_DCS_TRIG_SINGLE_1_SHIFT 13 /* DCS_TRIG_SINGLE_1 */ -#define WM8915_DCS_TRIG_SINGLE_1_WIDTH 1 /* DCS_TRIG_SINGLE_1 */ -#define WM8915_DCS_TRIG_SINGLE_0 0x1000 /* DCS_TRIG_SINGLE_0 */ -#define WM8915_DCS_TRIG_SINGLE_0_MASK 0x1000 /* DCS_TRIG_SINGLE_0 */ -#define WM8915_DCS_TRIG_SINGLE_0_SHIFT 12 /* DCS_TRIG_SINGLE_0 */ -#define WM8915_DCS_TRIG_SINGLE_0_WIDTH 1 /* DCS_TRIG_SINGLE_0 */ -#define WM8915_DCS_TRIG_SERIES_3 0x0800 /* DCS_TRIG_SERIES_3 */ -#define WM8915_DCS_TRIG_SERIES_3_MASK 0x0800 /* DCS_TRIG_SERIES_3 */ -#define WM8915_DCS_TRIG_SERIES_3_SHIFT 11 /* DCS_TRIG_SERIES_3 */ -#define WM8915_DCS_TRIG_SERIES_3_WIDTH 1 /* DCS_TRIG_SERIES_3 */ -#define WM8915_DCS_TRIG_SERIES_2 0x0400 /* DCS_TRIG_SERIES_2 */ -#define WM8915_DCS_TRIG_SERIES_2_MASK 0x0400 /* DCS_TRIG_SERIES_2 */ -#define WM8915_DCS_TRIG_SERIES_2_SHIFT 10 /* DCS_TRIG_SERIES_2 */ -#define WM8915_DCS_TRIG_SERIES_2_WIDTH 1 /* DCS_TRIG_SERIES_2 */ -#define WM8915_DCS_TRIG_SERIES_1 0x0200 /* DCS_TRIG_SERIES_1 */ -#define WM8915_DCS_TRIG_SERIES_1_MASK 0x0200 /* DCS_TRIG_SERIES_1 */ -#define WM8915_DCS_TRIG_SERIES_1_SHIFT 9 /* DCS_TRIG_SERIES_1 */ -#define WM8915_DCS_TRIG_SERIES_1_WIDTH 1 /* DCS_TRIG_SERIES_1 */ -#define WM8915_DCS_TRIG_SERIES_0 0x0100 /* DCS_TRIG_SERIES_0 */ -#define WM8915_DCS_TRIG_SERIES_0_MASK 0x0100 /* DCS_TRIG_SERIES_0 */ -#define WM8915_DCS_TRIG_SERIES_0_SHIFT 8 /* DCS_TRIG_SERIES_0 */ -#define WM8915_DCS_TRIG_SERIES_0_WIDTH 1 /* DCS_TRIG_SERIES_0 */ -#define WM8915_DCS_TRIG_STARTUP_3 0x0080 /* DCS_TRIG_STARTUP_3 */ -#define WM8915_DCS_TRIG_STARTUP_3_MASK 0x0080 /* DCS_TRIG_STARTUP_3 */ -#define WM8915_DCS_TRIG_STARTUP_3_SHIFT 7 /* DCS_TRIG_STARTUP_3 */ -#define WM8915_DCS_TRIG_STARTUP_3_WIDTH 1 /* DCS_TRIG_STARTUP_3 */ -#define WM8915_DCS_TRIG_STARTUP_2 0x0040 /* DCS_TRIG_STARTUP_2 */ -#define WM8915_DCS_TRIG_STARTUP_2_MASK 0x0040 /* DCS_TRIG_STARTUP_2 */ -#define WM8915_DCS_TRIG_STARTUP_2_SHIFT 6 /* DCS_TRIG_STARTUP_2 */ -#define WM8915_DCS_TRIG_STARTUP_2_WIDTH 1 /* DCS_TRIG_STARTUP_2 */ -#define WM8915_DCS_TRIG_STARTUP_1 0x0020 /* DCS_TRIG_STARTUP_1 */ -#define WM8915_DCS_TRIG_STARTUP_1_MASK 0x0020 /* DCS_TRIG_STARTUP_1 */ -#define WM8915_DCS_TRIG_STARTUP_1_SHIFT 5 /* DCS_TRIG_STARTUP_1 */ -#define WM8915_DCS_TRIG_STARTUP_1_WIDTH 1 /* DCS_TRIG_STARTUP_1 */ -#define WM8915_DCS_TRIG_STARTUP_0 0x0010 /* DCS_TRIG_STARTUP_0 */ -#define WM8915_DCS_TRIG_STARTUP_0_MASK 0x0010 /* DCS_TRIG_STARTUP_0 */ -#define WM8915_DCS_TRIG_STARTUP_0_SHIFT 4 /* DCS_TRIG_STARTUP_0 */ -#define WM8915_DCS_TRIG_STARTUP_0_WIDTH 1 /* DCS_TRIG_STARTUP_0 */ -#define WM8915_DCS_TRIG_DAC_WR_3 0x0008 /* DCS_TRIG_DAC_WR_3 */ -#define WM8915_DCS_TRIG_DAC_WR_3_MASK 0x0008 /* DCS_TRIG_DAC_WR_3 */ -#define WM8915_DCS_TRIG_DAC_WR_3_SHIFT 3 /* DCS_TRIG_DAC_WR_3 */ -#define WM8915_DCS_TRIG_DAC_WR_3_WIDTH 1 /* DCS_TRIG_DAC_WR_3 */ -#define WM8915_DCS_TRIG_DAC_WR_2 0x0004 /* DCS_TRIG_DAC_WR_2 */ -#define WM8915_DCS_TRIG_DAC_WR_2_MASK 0x0004 /* DCS_TRIG_DAC_WR_2 */ -#define WM8915_DCS_TRIG_DAC_WR_2_SHIFT 2 /* DCS_TRIG_DAC_WR_2 */ -#define WM8915_DCS_TRIG_DAC_WR_2_WIDTH 1 /* DCS_TRIG_DAC_WR_2 */ -#define WM8915_DCS_TRIG_DAC_WR_1 0x0002 /* DCS_TRIG_DAC_WR_1 */ -#define WM8915_DCS_TRIG_DAC_WR_1_MASK 0x0002 /* DCS_TRIG_DAC_WR_1 */ -#define WM8915_DCS_TRIG_DAC_WR_1_SHIFT 1 /* DCS_TRIG_DAC_WR_1 */ -#define WM8915_DCS_TRIG_DAC_WR_1_WIDTH 1 /* DCS_TRIG_DAC_WR_1 */ -#define WM8915_DCS_TRIG_DAC_WR_0 0x0001 /* DCS_TRIG_DAC_WR_0 */ -#define WM8915_DCS_TRIG_DAC_WR_0_MASK 0x0001 /* DCS_TRIG_DAC_WR_0 */ -#define WM8915_DCS_TRIG_DAC_WR_0_SHIFT 0 /* DCS_TRIG_DAC_WR_0 */ -#define WM8915_DCS_TRIG_DAC_WR_0_WIDTH 1 /* DCS_TRIG_DAC_WR_0 */ - -/* - * R82 (0x52) - DC Servo (3) - */ -#define WM8915_DCS_TIMER_PERIOD_23_MASK 0x0F00 /* DCS_TIMER_PERIOD_23 - [11:8] */ -#define WM8915_DCS_TIMER_PERIOD_23_SHIFT 8 /* DCS_TIMER_PERIOD_23 - [11:8] */ -#define WM8915_DCS_TIMER_PERIOD_23_WIDTH 4 /* DCS_TIMER_PERIOD_23 - [11:8] */ -#define WM8915_DCS_TIMER_PERIOD_01_MASK 0x000F /* DCS_TIMER_PERIOD_01 - [3:0] */ -#define WM8915_DCS_TIMER_PERIOD_01_SHIFT 0 /* DCS_TIMER_PERIOD_01 - [3:0] */ -#define WM8915_DCS_TIMER_PERIOD_01_WIDTH 4 /* DCS_TIMER_PERIOD_01 - [3:0] */ - -/* - * R84 (0x54) - DC Servo (5) - */ -#define WM8915_DCS_SERIES_NO_23_MASK 0x7F00 /* DCS_SERIES_NO_23 - [14:8] */ -#define WM8915_DCS_SERIES_NO_23_SHIFT 8 /* DCS_SERIES_NO_23 - [14:8] */ -#define WM8915_DCS_SERIES_NO_23_WIDTH 7 /* DCS_SERIES_NO_23 - [14:8] */ -#define WM8915_DCS_SERIES_NO_01_MASK 0x007F /* DCS_SERIES_NO_01 - [6:0] */ -#define WM8915_DCS_SERIES_NO_01_SHIFT 0 /* DCS_SERIES_NO_01 - [6:0] */ -#define WM8915_DCS_SERIES_NO_01_WIDTH 7 /* DCS_SERIES_NO_01 - [6:0] */ - -/* - * R85 (0x55) - DC Servo (6) - */ -#define WM8915_DCS_DAC_WR_VAL_3_MASK 0xFF00 /* DCS_DAC_WR_VAL_3 - [15:8] */ -#define WM8915_DCS_DAC_WR_VAL_3_SHIFT 8 /* DCS_DAC_WR_VAL_3 - [15:8] */ -#define WM8915_DCS_DAC_WR_VAL_3_WIDTH 8 /* DCS_DAC_WR_VAL_3 - [15:8] */ -#define WM8915_DCS_DAC_WR_VAL_2_MASK 0x00FF /* DCS_DAC_WR_VAL_2 - [7:0] */ -#define WM8915_DCS_DAC_WR_VAL_2_SHIFT 0 /* DCS_DAC_WR_VAL_2 - [7:0] */ -#define WM8915_DCS_DAC_WR_VAL_2_WIDTH 8 /* DCS_DAC_WR_VAL_2 - [7:0] */ - -/* - * R86 (0x56) - DC Servo (7) - */ -#define WM8915_DCS_DAC_WR_VAL_1_MASK 0xFF00 /* DCS_DAC_WR_VAL_1 - [15:8] */ -#define WM8915_DCS_DAC_WR_VAL_1_SHIFT 8 /* DCS_DAC_WR_VAL_1 - [15:8] */ -#define WM8915_DCS_DAC_WR_VAL_1_WIDTH 8 /* DCS_DAC_WR_VAL_1 - [15:8] */ -#define WM8915_DCS_DAC_WR_VAL_0_MASK 0x00FF /* DCS_DAC_WR_VAL_0 - [7:0] */ -#define WM8915_DCS_DAC_WR_VAL_0_SHIFT 0 /* DCS_DAC_WR_VAL_0 - [7:0] */ -#define WM8915_DCS_DAC_WR_VAL_0_WIDTH 8 /* DCS_DAC_WR_VAL_0 - [7:0] */ - -/* - * R87 (0x57) - DC Servo Readback 0 - */ -#define WM8915_DCS_CAL_COMPLETE_MASK 0x0F00 /* DCS_CAL_COMPLETE - [11:8] */ -#define WM8915_DCS_CAL_COMPLETE_SHIFT 8 /* DCS_CAL_COMPLETE - [11:8] */ -#define WM8915_DCS_CAL_COMPLETE_WIDTH 4 /* DCS_CAL_COMPLETE - [11:8] */ -#define WM8915_DCS_DAC_WR_COMPLETE_MASK 0x00F0 /* DCS_DAC_WR_COMPLETE - [7:4] */ -#define WM8915_DCS_DAC_WR_COMPLETE_SHIFT 4 /* DCS_DAC_WR_COMPLETE - [7:4] */ -#define WM8915_DCS_DAC_WR_COMPLETE_WIDTH 4 /* DCS_DAC_WR_COMPLETE - [7:4] */ -#define WM8915_DCS_STARTUP_COMPLETE_MASK 0x000F /* DCS_STARTUP_COMPLETE - [3:0] */ -#define WM8915_DCS_STARTUP_COMPLETE_SHIFT 0 /* DCS_STARTUP_COMPLETE - [3:0] */ -#define WM8915_DCS_STARTUP_COMPLETE_WIDTH 4 /* DCS_STARTUP_COMPLETE - [3:0] */ - -/* - * R96 (0x60) - Analogue HP (1) - */ -#define WM8915_HPOUT1L_RMV_SHORT 0x0080 /* HPOUT1L_RMV_SHORT */ -#define WM8915_HPOUT1L_RMV_SHORT_MASK 0x0080 /* HPOUT1L_RMV_SHORT */ -#define WM8915_HPOUT1L_RMV_SHORT_SHIFT 7 /* HPOUT1L_RMV_SHORT */ -#define WM8915_HPOUT1L_RMV_SHORT_WIDTH 1 /* HPOUT1L_RMV_SHORT */ -#define WM8915_HPOUT1L_OUTP 0x0040 /* HPOUT1L_OUTP */ -#define WM8915_HPOUT1L_OUTP_MASK 0x0040 /* HPOUT1L_OUTP */ -#define WM8915_HPOUT1L_OUTP_SHIFT 6 /* HPOUT1L_OUTP */ -#define WM8915_HPOUT1L_OUTP_WIDTH 1 /* HPOUT1L_OUTP */ -#define WM8915_HPOUT1L_DLY 0x0020 /* HPOUT1L_DLY */ -#define WM8915_HPOUT1L_DLY_MASK 0x0020 /* HPOUT1L_DLY */ -#define WM8915_HPOUT1L_DLY_SHIFT 5 /* HPOUT1L_DLY */ -#define WM8915_HPOUT1L_DLY_WIDTH 1 /* HPOUT1L_DLY */ -#define WM8915_HPOUT1R_RMV_SHORT 0x0008 /* HPOUT1R_RMV_SHORT */ -#define WM8915_HPOUT1R_RMV_SHORT_MASK 0x0008 /* HPOUT1R_RMV_SHORT */ -#define WM8915_HPOUT1R_RMV_SHORT_SHIFT 3 /* HPOUT1R_RMV_SHORT */ -#define WM8915_HPOUT1R_RMV_SHORT_WIDTH 1 /* HPOUT1R_RMV_SHORT */ -#define WM8915_HPOUT1R_OUTP 0x0004 /* HPOUT1R_OUTP */ -#define WM8915_HPOUT1R_OUTP_MASK 0x0004 /* HPOUT1R_OUTP */ -#define WM8915_HPOUT1R_OUTP_SHIFT 2 /* HPOUT1R_OUTP */ -#define WM8915_HPOUT1R_OUTP_WIDTH 1 /* HPOUT1R_OUTP */ -#define WM8915_HPOUT1R_DLY 0x0002 /* HPOUT1R_DLY */ -#define WM8915_HPOUT1R_DLY_MASK 0x0002 /* HPOUT1R_DLY */ -#define WM8915_HPOUT1R_DLY_SHIFT 1 /* HPOUT1R_DLY */ -#define WM8915_HPOUT1R_DLY_WIDTH 1 /* HPOUT1R_DLY */ - -/* - * R97 (0x61) - Analogue HP (2) - */ -#define WM8915_HPOUT2L_RMV_SHORT 0x0080 /* HPOUT2L_RMV_SHORT */ -#define WM8915_HPOUT2L_RMV_SHORT_MASK 0x0080 /* HPOUT2L_RMV_SHORT */ -#define WM8915_HPOUT2L_RMV_SHORT_SHIFT 7 /* HPOUT2L_RMV_SHORT */ -#define WM8915_HPOUT2L_RMV_SHORT_WIDTH 1 /* HPOUT2L_RMV_SHORT */ -#define WM8915_HPOUT2L_OUTP 0x0040 /* HPOUT2L_OUTP */ -#define WM8915_HPOUT2L_OUTP_MASK 0x0040 /* HPOUT2L_OUTP */ -#define WM8915_HPOUT2L_OUTP_SHIFT 6 /* HPOUT2L_OUTP */ -#define WM8915_HPOUT2L_OUTP_WIDTH 1 /* HPOUT2L_OUTP */ -#define WM8915_HPOUT2L_DLY 0x0020 /* HPOUT2L_DLY */ -#define WM8915_HPOUT2L_DLY_MASK 0x0020 /* HPOUT2L_DLY */ -#define WM8915_HPOUT2L_DLY_SHIFT 5 /* HPOUT2L_DLY */ -#define WM8915_HPOUT2L_DLY_WIDTH 1 /* HPOUT2L_DLY */ -#define WM8915_HPOUT2R_RMV_SHORT 0x0008 /* HPOUT2R_RMV_SHORT */ -#define WM8915_HPOUT2R_RMV_SHORT_MASK 0x0008 /* HPOUT2R_RMV_SHORT */ -#define WM8915_HPOUT2R_RMV_SHORT_SHIFT 3 /* HPOUT2R_RMV_SHORT */ -#define WM8915_HPOUT2R_RMV_SHORT_WIDTH 1 /* HPOUT2R_RMV_SHORT */ -#define WM8915_HPOUT2R_OUTP 0x0004 /* HPOUT2R_OUTP */ -#define WM8915_HPOUT2R_OUTP_MASK 0x0004 /* HPOUT2R_OUTP */ -#define WM8915_HPOUT2R_OUTP_SHIFT 2 /* HPOUT2R_OUTP */ -#define WM8915_HPOUT2R_OUTP_WIDTH 1 /* HPOUT2R_OUTP */ -#define WM8915_HPOUT2R_DLY 0x0002 /* HPOUT2R_DLY */ -#define WM8915_HPOUT2R_DLY_MASK 0x0002 /* HPOUT2R_DLY */ -#define WM8915_HPOUT2R_DLY_SHIFT 1 /* HPOUT2R_DLY */ -#define WM8915_HPOUT2R_DLY_WIDTH 1 /* HPOUT2R_DLY */ - -/* - * R256 (0x100) - Chip Revision - */ -#define WM8915_CHIP_REV_MASK 0x000F /* CHIP_REV - [3:0] */ -#define WM8915_CHIP_REV_SHIFT 0 /* CHIP_REV - [3:0] */ -#define WM8915_CHIP_REV_WIDTH 4 /* CHIP_REV - [3:0] */ - -/* - * R257 (0x101) - Control Interface (1) - */ -#define WM8915_AUTO_INC 0x0004 /* AUTO_INC */ -#define WM8915_AUTO_INC_MASK 0x0004 /* AUTO_INC */ -#define WM8915_AUTO_INC_SHIFT 2 /* AUTO_INC */ -#define WM8915_AUTO_INC_WIDTH 1 /* AUTO_INC */ - -/* - * R272 (0x110) - Write Sequencer Ctrl (1) - */ -#define WM8915_WSEQ_ENA 0x8000 /* WSEQ_ENA */ -#define WM8915_WSEQ_ENA_MASK 0x8000 /* WSEQ_ENA */ -#define WM8915_WSEQ_ENA_SHIFT 15 /* WSEQ_ENA */ -#define WM8915_WSEQ_ENA_WIDTH 1 /* WSEQ_ENA */ -#define WM8915_WSEQ_ABORT 0x0200 /* WSEQ_ABORT */ -#define WM8915_WSEQ_ABORT_MASK 0x0200 /* WSEQ_ABORT */ -#define WM8915_WSEQ_ABORT_SHIFT 9 /* WSEQ_ABORT */ -#define WM8915_WSEQ_ABORT_WIDTH 1 /* WSEQ_ABORT */ -#define WM8915_WSEQ_START 0x0100 /* WSEQ_START */ -#define WM8915_WSEQ_START_MASK 0x0100 /* WSEQ_START */ -#define WM8915_WSEQ_START_SHIFT 8 /* WSEQ_START */ -#define WM8915_WSEQ_START_WIDTH 1 /* WSEQ_START */ -#define WM8915_WSEQ_START_INDEX_MASK 0x007F /* WSEQ_START_INDEX - [6:0] */ -#define WM8915_WSEQ_START_INDEX_SHIFT 0 /* WSEQ_START_INDEX - [6:0] */ -#define WM8915_WSEQ_START_INDEX_WIDTH 7 /* WSEQ_START_INDEX - [6:0] */ - -/* - * R273 (0x111) - Write Sequencer Ctrl (2) - */ -#define WM8915_WSEQ_BUSY 0x0100 /* WSEQ_BUSY */ -#define WM8915_WSEQ_BUSY_MASK 0x0100 /* WSEQ_BUSY */ -#define WM8915_WSEQ_BUSY_SHIFT 8 /* WSEQ_BUSY */ -#define WM8915_WSEQ_BUSY_WIDTH 1 /* WSEQ_BUSY */ -#define WM8915_WSEQ_CURRENT_INDEX_MASK 0x007F /* WSEQ_CURRENT_INDEX - [6:0] */ -#define WM8915_WSEQ_CURRENT_INDEX_SHIFT 0 /* WSEQ_CURRENT_INDEX - [6:0] */ -#define WM8915_WSEQ_CURRENT_INDEX_WIDTH 7 /* WSEQ_CURRENT_INDEX - [6:0] */ - -/* - * R512 (0x200) - AIF Clocking (1) - */ -#define WM8915_SYSCLK_SRC_MASK 0x0018 /* SYSCLK_SRC - [4:3] */ -#define WM8915_SYSCLK_SRC_SHIFT 3 /* SYSCLK_SRC - [4:3] */ -#define WM8915_SYSCLK_SRC_WIDTH 2 /* SYSCLK_SRC - [4:3] */ -#define WM8915_SYSCLK_INV 0x0004 /* SYSCLK_INV */ -#define WM8915_SYSCLK_INV_MASK 0x0004 /* SYSCLK_INV */ -#define WM8915_SYSCLK_INV_SHIFT 2 /* SYSCLK_INV */ -#define WM8915_SYSCLK_INV_WIDTH 1 /* SYSCLK_INV */ -#define WM8915_SYSCLK_DIV 0x0002 /* SYSCLK_DIV */ -#define WM8915_SYSCLK_DIV_MASK 0x0002 /* SYSCLK_DIV */ -#define WM8915_SYSCLK_DIV_SHIFT 1 /* SYSCLK_DIV */ -#define WM8915_SYSCLK_DIV_WIDTH 1 /* SYSCLK_DIV */ -#define WM8915_SYSCLK_ENA 0x0001 /* SYSCLK_ENA */ -#define WM8915_SYSCLK_ENA_MASK 0x0001 /* SYSCLK_ENA */ -#define WM8915_SYSCLK_ENA_SHIFT 0 /* SYSCLK_ENA */ -#define WM8915_SYSCLK_ENA_WIDTH 1 /* SYSCLK_ENA */ - -/* - * R513 (0x201) - AIF Clocking (2) - */ -#define WM8915_DSP2_DIV_MASK 0x0018 /* DSP2_DIV - [4:3] */ -#define WM8915_DSP2_DIV_SHIFT 3 /* DSP2_DIV - [4:3] */ -#define WM8915_DSP2_DIV_WIDTH 2 /* DSP2_DIV - [4:3] */ -#define WM8915_DSP1_DIV_MASK 0x0003 /* DSP1_DIV - [1:0] */ -#define WM8915_DSP1_DIV_SHIFT 0 /* DSP1_DIV - [1:0] */ -#define WM8915_DSP1_DIV_WIDTH 2 /* DSP1_DIV - [1:0] */ - -/* - * R520 (0x208) - Clocking (1) - */ -#define WM8915_LFCLK_ENA 0x0020 /* LFCLK_ENA */ -#define WM8915_LFCLK_ENA_MASK 0x0020 /* LFCLK_ENA */ -#define WM8915_LFCLK_ENA_SHIFT 5 /* LFCLK_ENA */ -#define WM8915_LFCLK_ENA_WIDTH 1 /* LFCLK_ENA */ -#define WM8915_TOCLK_ENA 0x0010 /* TOCLK_ENA */ -#define WM8915_TOCLK_ENA_MASK 0x0010 /* TOCLK_ENA */ -#define WM8915_TOCLK_ENA_SHIFT 4 /* TOCLK_ENA */ -#define WM8915_TOCLK_ENA_WIDTH 1 /* TOCLK_ENA */ -#define WM8915_AIFCLK_ENA 0x0004 /* AIFCLK_ENA */ -#define WM8915_AIFCLK_ENA_MASK 0x0004 /* AIFCLK_ENA */ -#define WM8915_AIFCLK_ENA_SHIFT 2 /* AIFCLK_ENA */ -#define WM8915_AIFCLK_ENA_WIDTH 1 /* AIFCLK_ENA */ -#define WM8915_SYSDSPCLK_ENA 0x0002 /* SYSDSPCLK_ENA */ -#define WM8915_SYSDSPCLK_ENA_MASK 0x0002 /* SYSDSPCLK_ENA */ -#define WM8915_SYSDSPCLK_ENA_SHIFT 1 /* SYSDSPCLK_ENA */ -#define WM8915_SYSDSPCLK_ENA_WIDTH 1 /* SYSDSPCLK_ENA */ - -/* - * R521 (0x209) - Clocking (2) - */ -#define WM8915_TOCLK_DIV_MASK 0x0700 /* TOCLK_DIV - [10:8] */ -#define WM8915_TOCLK_DIV_SHIFT 8 /* TOCLK_DIV - [10:8] */ -#define WM8915_TOCLK_DIV_WIDTH 3 /* TOCLK_DIV - [10:8] */ -#define WM8915_DBCLK_DIV_MASK 0x00F0 /* DBCLK_DIV - [7:4] */ -#define WM8915_DBCLK_DIV_SHIFT 4 /* DBCLK_DIV - [7:4] */ -#define WM8915_DBCLK_DIV_WIDTH 4 /* DBCLK_DIV - [7:4] */ -#define WM8915_OPCLK_DIV_MASK 0x0007 /* OPCLK_DIV - [2:0] */ -#define WM8915_OPCLK_DIV_SHIFT 0 /* OPCLK_DIV - [2:0] */ -#define WM8915_OPCLK_DIV_WIDTH 3 /* OPCLK_DIV - [2:0] */ - -/* - * R528 (0x210) - AIF Rate - */ -#define WM8915_SYSCLK_RATE 0x0001 /* SYSCLK_RATE */ -#define WM8915_SYSCLK_RATE_MASK 0x0001 /* SYSCLK_RATE */ -#define WM8915_SYSCLK_RATE_SHIFT 0 /* SYSCLK_RATE */ -#define WM8915_SYSCLK_RATE_WIDTH 1 /* SYSCLK_RATE */ - -/* - * R544 (0x220) - FLL Control (1) - */ -#define WM8915_FLL_OSC_ENA 0x0002 /* FLL_OSC_ENA */ -#define WM8915_FLL_OSC_ENA_MASK 0x0002 /* FLL_OSC_ENA */ -#define WM8915_FLL_OSC_ENA_SHIFT 1 /* FLL_OSC_ENA */ -#define WM8915_FLL_OSC_ENA_WIDTH 1 /* FLL_OSC_ENA */ -#define WM8915_FLL_ENA 0x0001 /* FLL_ENA */ -#define WM8915_FLL_ENA_MASK 0x0001 /* FLL_ENA */ -#define WM8915_FLL_ENA_SHIFT 0 /* FLL_ENA */ -#define WM8915_FLL_ENA_WIDTH 1 /* FLL_ENA */ - -/* - * R545 (0x221) - FLL Control (2) - */ -#define WM8915_FLL_OUTDIV_MASK 0x3F00 /* FLL_OUTDIV - [13:8] */ -#define WM8915_FLL_OUTDIV_SHIFT 8 /* FLL_OUTDIV - [13:8] */ -#define WM8915_FLL_OUTDIV_WIDTH 6 /* FLL_OUTDIV - [13:8] */ -#define WM8915_FLL_FRATIO_MASK 0x0007 /* FLL_FRATIO - [2:0] */ -#define WM8915_FLL_FRATIO_SHIFT 0 /* FLL_FRATIO - [2:0] */ -#define WM8915_FLL_FRATIO_WIDTH 3 /* FLL_FRATIO - [2:0] */ - -/* - * R546 (0x222) - FLL Control (3) - */ -#define WM8915_FLL_THETA_MASK 0xFFFF /* FLL_THETA - [15:0] */ -#define WM8915_FLL_THETA_SHIFT 0 /* FLL_THETA - [15:0] */ -#define WM8915_FLL_THETA_WIDTH 16 /* FLL_THETA - [15:0] */ - -/* - * R547 (0x223) - FLL Control (4) - */ -#define WM8915_FLL_N_MASK 0x7FE0 /* FLL_N - [14:5] */ -#define WM8915_FLL_N_SHIFT 5 /* FLL_N - [14:5] */ -#define WM8915_FLL_N_WIDTH 10 /* FLL_N - [14:5] */ -#define WM8915_FLL_LOOP_GAIN_MASK 0x000F /* FLL_LOOP_GAIN - [3:0] */ -#define WM8915_FLL_LOOP_GAIN_SHIFT 0 /* FLL_LOOP_GAIN - [3:0] */ -#define WM8915_FLL_LOOP_GAIN_WIDTH 4 /* FLL_LOOP_GAIN - [3:0] */ - -/* - * R548 (0x224) - FLL Control (5) - */ -#define WM8915_FLL_FRC_NCO_VAL_MASK 0x1F80 /* FLL_FRC_NCO_VAL - [12:7] */ -#define WM8915_FLL_FRC_NCO_VAL_SHIFT 7 /* FLL_FRC_NCO_VAL - [12:7] */ -#define WM8915_FLL_FRC_NCO_VAL_WIDTH 6 /* FLL_FRC_NCO_VAL - [12:7] */ -#define WM8915_FLL_FRC_NCO 0x0040 /* FLL_FRC_NCO */ -#define WM8915_FLL_FRC_NCO_MASK 0x0040 /* FLL_FRC_NCO */ -#define WM8915_FLL_FRC_NCO_SHIFT 6 /* FLL_FRC_NCO */ -#define WM8915_FLL_FRC_NCO_WIDTH 1 /* FLL_FRC_NCO */ -#define WM8915_FLL_REFCLK_DIV_MASK 0x0018 /* FLL_REFCLK_DIV - [4:3] */ -#define WM8915_FLL_REFCLK_DIV_SHIFT 3 /* FLL_REFCLK_DIV - [4:3] */ -#define WM8915_FLL_REFCLK_DIV_WIDTH 2 /* FLL_REFCLK_DIV - [4:3] */ -#define WM8915_FLL_REF_FREQ 0x0004 /* FLL_REF_FREQ */ -#define WM8915_FLL_REF_FREQ_MASK 0x0004 /* FLL_REF_FREQ */ -#define WM8915_FLL_REF_FREQ_SHIFT 2 /* FLL_REF_FREQ */ -#define WM8915_FLL_REF_FREQ_WIDTH 1 /* FLL_REF_FREQ */ -#define WM8915_FLL_REFCLK_SRC_MASK 0x0003 /* FLL_REFCLK_SRC - [1:0] */ -#define WM8915_FLL_REFCLK_SRC_SHIFT 0 /* FLL_REFCLK_SRC - [1:0] */ -#define WM8915_FLL_REFCLK_SRC_WIDTH 2 /* FLL_REFCLK_SRC - [1:0] */ - -/* - * R549 (0x225) - FLL Control (6) - */ -#define WM8915_FLL_REFCLK_SRC_STS_MASK 0x000C /* FLL_REFCLK_SRC_STS - [3:2] */ -#define WM8915_FLL_REFCLK_SRC_STS_SHIFT 2 /* FLL_REFCLK_SRC_STS - [3:2] */ -#define WM8915_FLL_REFCLK_SRC_STS_WIDTH 2 /* FLL_REFCLK_SRC_STS - [3:2] */ -#define WM8915_FLL_SWITCH_CLK 0x0001 /* FLL_SWITCH_CLK */ -#define WM8915_FLL_SWITCH_CLK_MASK 0x0001 /* FLL_SWITCH_CLK */ -#define WM8915_FLL_SWITCH_CLK_SHIFT 0 /* FLL_SWITCH_CLK */ -#define WM8915_FLL_SWITCH_CLK_WIDTH 1 /* FLL_SWITCH_CLK */ - -/* - * R550 (0x226) - FLL EFS 1 - */ -#define WM8915_FLL_LAMBDA_MASK 0xFFFF /* FLL_LAMBDA - [15:0] */ -#define WM8915_FLL_LAMBDA_SHIFT 0 /* FLL_LAMBDA - [15:0] */ -#define WM8915_FLL_LAMBDA_WIDTH 16 /* FLL_LAMBDA - [15:0] */ - -/* - * R551 (0x227) - FLL EFS 2 - */ -#define WM8915_FLL_LFSR_SEL_MASK 0x0006 /* FLL_LFSR_SEL - [2:1] */ -#define WM8915_FLL_LFSR_SEL_SHIFT 1 /* FLL_LFSR_SEL - [2:1] */ -#define WM8915_FLL_LFSR_SEL_WIDTH 2 /* FLL_LFSR_SEL - [2:1] */ -#define WM8915_FLL_EFS_ENA 0x0001 /* FLL_EFS_ENA */ -#define WM8915_FLL_EFS_ENA_MASK 0x0001 /* FLL_EFS_ENA */ -#define WM8915_FLL_EFS_ENA_SHIFT 0 /* FLL_EFS_ENA */ -#define WM8915_FLL_EFS_ENA_WIDTH 1 /* FLL_EFS_ENA */ - -/* - * R768 (0x300) - AIF1 Control - */ -#define WM8915_AIF1_TRI 0x0004 /* AIF1_TRI */ -#define WM8915_AIF1_TRI_MASK 0x0004 /* AIF1_TRI */ -#define WM8915_AIF1_TRI_SHIFT 2 /* AIF1_TRI */ -#define WM8915_AIF1_TRI_WIDTH 1 /* AIF1_TRI */ -#define WM8915_AIF1_FMT_MASK 0x0003 /* AIF1_FMT - [1:0] */ -#define WM8915_AIF1_FMT_SHIFT 0 /* AIF1_FMT - [1:0] */ -#define WM8915_AIF1_FMT_WIDTH 2 /* AIF1_FMT - [1:0] */ - -/* - * R769 (0x301) - AIF1 BCLK - */ -#define WM8915_AIF1_BCLK_INV 0x0400 /* AIF1_BCLK_INV */ -#define WM8915_AIF1_BCLK_INV_MASK 0x0400 /* AIF1_BCLK_INV */ -#define WM8915_AIF1_BCLK_INV_SHIFT 10 /* AIF1_BCLK_INV */ -#define WM8915_AIF1_BCLK_INV_WIDTH 1 /* AIF1_BCLK_INV */ -#define WM8915_AIF1_BCLK_FRC 0x0200 /* AIF1_BCLK_FRC */ -#define WM8915_AIF1_BCLK_FRC_MASK 0x0200 /* AIF1_BCLK_FRC */ -#define WM8915_AIF1_BCLK_FRC_SHIFT 9 /* AIF1_BCLK_FRC */ -#define WM8915_AIF1_BCLK_FRC_WIDTH 1 /* AIF1_BCLK_FRC */ -#define WM8915_AIF1_BCLK_MSTR 0x0100 /* AIF1_BCLK_MSTR */ -#define WM8915_AIF1_BCLK_MSTR_MASK 0x0100 /* AIF1_BCLK_MSTR */ -#define WM8915_AIF1_BCLK_MSTR_SHIFT 8 /* AIF1_BCLK_MSTR */ -#define WM8915_AIF1_BCLK_MSTR_WIDTH 1 /* AIF1_BCLK_MSTR */ -#define WM8915_AIF1_BCLK_DIV_MASK 0x000F /* AIF1_BCLK_DIV - [3:0] */ -#define WM8915_AIF1_BCLK_DIV_SHIFT 0 /* AIF1_BCLK_DIV - [3:0] */ -#define WM8915_AIF1_BCLK_DIV_WIDTH 4 /* AIF1_BCLK_DIV - [3:0] */ - -/* - * R770 (0x302) - AIF1 TX LRCLK(1) - */ -#define WM8915_AIF1TX_RATE_MASK 0x07FF /* AIF1TX_RATE - [10:0] */ -#define WM8915_AIF1TX_RATE_SHIFT 0 /* AIF1TX_RATE - [10:0] */ -#define WM8915_AIF1TX_RATE_WIDTH 11 /* AIF1TX_RATE - [10:0] */ - -/* - * R771 (0x303) - AIF1 TX LRCLK(2) - */ -#define WM8915_AIF1TX_LRCLK_MODE 0x0008 /* AIF1TX_LRCLK_MODE */ -#define WM8915_AIF1TX_LRCLK_MODE_MASK 0x0008 /* AIF1TX_LRCLK_MODE */ -#define WM8915_AIF1TX_LRCLK_MODE_SHIFT 3 /* AIF1TX_LRCLK_MODE */ -#define WM8915_AIF1TX_LRCLK_MODE_WIDTH 1 /* AIF1TX_LRCLK_MODE */ -#define WM8915_AIF1TX_LRCLK_INV 0x0004 /* AIF1TX_LRCLK_INV */ -#define WM8915_AIF1TX_LRCLK_INV_MASK 0x0004 /* AIF1TX_LRCLK_INV */ -#define WM8915_AIF1TX_LRCLK_INV_SHIFT 2 /* AIF1TX_LRCLK_INV */ -#define WM8915_AIF1TX_LRCLK_INV_WIDTH 1 /* AIF1TX_LRCLK_INV */ -#define WM8915_AIF1TX_LRCLK_FRC 0x0002 /* AIF1TX_LRCLK_FRC */ -#define WM8915_AIF1TX_LRCLK_FRC_MASK 0x0002 /* AIF1TX_LRCLK_FRC */ -#define WM8915_AIF1TX_LRCLK_FRC_SHIFT 1 /* AIF1TX_LRCLK_FRC */ -#define WM8915_AIF1TX_LRCLK_FRC_WIDTH 1 /* AIF1TX_LRCLK_FRC */ -#define WM8915_AIF1TX_LRCLK_MSTR 0x0001 /* AIF1TX_LRCLK_MSTR */ -#define WM8915_AIF1TX_LRCLK_MSTR_MASK 0x0001 /* AIF1TX_LRCLK_MSTR */ -#define WM8915_AIF1TX_LRCLK_MSTR_SHIFT 0 /* AIF1TX_LRCLK_MSTR */ -#define WM8915_AIF1TX_LRCLK_MSTR_WIDTH 1 /* AIF1TX_LRCLK_MSTR */ - -/* - * R772 (0x304) - AIF1 RX LRCLK(1) - */ -#define WM8915_AIF1RX_RATE_MASK 0x07FF /* AIF1RX_RATE - [10:0] */ -#define WM8915_AIF1RX_RATE_SHIFT 0 /* AIF1RX_RATE - [10:0] */ -#define WM8915_AIF1RX_RATE_WIDTH 11 /* AIF1RX_RATE - [10:0] */ - -/* - * R773 (0x305) - AIF1 RX LRCLK(2) - */ -#define WM8915_AIF1RX_LRCLK_INV 0x0004 /* AIF1RX_LRCLK_INV */ -#define WM8915_AIF1RX_LRCLK_INV_MASK 0x0004 /* AIF1RX_LRCLK_INV */ -#define WM8915_AIF1RX_LRCLK_INV_SHIFT 2 /* AIF1RX_LRCLK_INV */ -#define WM8915_AIF1RX_LRCLK_INV_WIDTH 1 /* AIF1RX_LRCLK_INV */ -#define WM8915_AIF1RX_LRCLK_FRC 0x0002 /* AIF1RX_LRCLK_FRC */ -#define WM8915_AIF1RX_LRCLK_FRC_MASK 0x0002 /* AIF1RX_LRCLK_FRC */ -#define WM8915_AIF1RX_LRCLK_FRC_SHIFT 1 /* AIF1RX_LRCLK_FRC */ -#define WM8915_AIF1RX_LRCLK_FRC_WIDTH 1 /* AIF1RX_LRCLK_FRC */ -#define WM8915_AIF1RX_LRCLK_MSTR 0x0001 /* AIF1RX_LRCLK_MSTR */ -#define WM8915_AIF1RX_LRCLK_MSTR_MASK 0x0001 /* AIF1RX_LRCLK_MSTR */ -#define WM8915_AIF1RX_LRCLK_MSTR_SHIFT 0 /* AIF1RX_LRCLK_MSTR */ -#define WM8915_AIF1RX_LRCLK_MSTR_WIDTH 1 /* AIF1RX_LRCLK_MSTR */ - -/* - * R774 (0x306) - AIF1TX Data Configuration (1) - */ -#define WM8915_AIF1TX_WL_MASK 0xFF00 /* AIF1TX_WL - [15:8] */ -#define WM8915_AIF1TX_WL_SHIFT 8 /* AIF1TX_WL - [15:8] */ -#define WM8915_AIF1TX_WL_WIDTH 8 /* AIF1TX_WL - [15:8] */ -#define WM8915_AIF1TX_SLOT_LEN_MASK 0x00FF /* AIF1TX_SLOT_LEN - [7:0] */ -#define WM8915_AIF1TX_SLOT_LEN_SHIFT 0 /* AIF1TX_SLOT_LEN - [7:0] */ -#define WM8915_AIF1TX_SLOT_LEN_WIDTH 8 /* AIF1TX_SLOT_LEN - [7:0] */ - -/* - * R775 (0x307) - AIF1TX Data Configuration (2) - */ -#define WM8915_AIF1TX_DAT_TRI 0x0001 /* AIF1TX_DAT_TRI */ -#define WM8915_AIF1TX_DAT_TRI_MASK 0x0001 /* AIF1TX_DAT_TRI */ -#define WM8915_AIF1TX_DAT_TRI_SHIFT 0 /* AIF1TX_DAT_TRI */ -#define WM8915_AIF1TX_DAT_TRI_WIDTH 1 /* AIF1TX_DAT_TRI */ - -/* - * R776 (0x308) - AIF1RX Data Configuration - */ -#define WM8915_AIF1RX_WL_MASK 0xFF00 /* AIF1RX_WL - [15:8] */ -#define WM8915_AIF1RX_WL_SHIFT 8 /* AIF1RX_WL - [15:8] */ -#define WM8915_AIF1RX_WL_WIDTH 8 /* AIF1RX_WL - [15:8] */ -#define WM8915_AIF1RX_SLOT_LEN_MASK 0x00FF /* AIF1RX_SLOT_LEN - [7:0] */ -#define WM8915_AIF1RX_SLOT_LEN_SHIFT 0 /* AIF1RX_SLOT_LEN - [7:0] */ -#define WM8915_AIF1RX_SLOT_LEN_WIDTH 8 /* AIF1RX_SLOT_LEN - [7:0] */ - -/* - * R777 (0x309) - AIF1TX Channel 0 Configuration - */ -#define WM8915_AIF1TX_CHAN0_DAT_INV 0x8000 /* AIF1TX_CHAN0_DAT_INV */ -#define WM8915_AIF1TX_CHAN0_DAT_INV_MASK 0x8000 /* AIF1TX_CHAN0_DAT_INV */ -#define WM8915_AIF1TX_CHAN0_DAT_INV_SHIFT 15 /* AIF1TX_CHAN0_DAT_INV */ -#define WM8915_AIF1TX_CHAN0_DAT_INV_WIDTH 1 /* AIF1TX_CHAN0_DAT_INV */ -#define WM8915_AIF1TX_CHAN0_SPACING_MASK 0x7E00 /* AIF1TX_CHAN0_SPACING - [14:9] */ -#define WM8915_AIF1TX_CHAN0_SPACING_SHIFT 9 /* AIF1TX_CHAN0_SPACING - [14:9] */ -#define WM8915_AIF1TX_CHAN0_SPACING_WIDTH 6 /* AIF1TX_CHAN0_SPACING - [14:9] */ -#define WM8915_AIF1TX_CHAN0_SLOTS_MASK 0x01C0 /* AIF1TX_CHAN0_SLOTS - [8:6] */ -#define WM8915_AIF1TX_CHAN0_SLOTS_SHIFT 6 /* AIF1TX_CHAN0_SLOTS - [8:6] */ -#define WM8915_AIF1TX_CHAN0_SLOTS_WIDTH 3 /* AIF1TX_CHAN0_SLOTS - [8:6] */ -#define WM8915_AIF1TX_CHAN0_START_SLOT_MASK 0x003F /* AIF1TX_CHAN0_START_SLOT - [5:0] */ -#define WM8915_AIF1TX_CHAN0_START_SLOT_SHIFT 0 /* AIF1TX_CHAN0_START_SLOT - [5:0] */ -#define WM8915_AIF1TX_CHAN0_START_SLOT_WIDTH 6 /* AIF1TX_CHAN0_START_SLOT - [5:0] */ - -/* - * R778 (0x30A) - AIF1TX Channel 1 Configuration - */ -#define WM8915_AIF1TX_CHAN1_DAT_INV 0x8000 /* AIF1TX_CHAN1_DAT_INV */ -#define WM8915_AIF1TX_CHAN1_DAT_INV_MASK 0x8000 /* AIF1TX_CHAN1_DAT_INV */ -#define WM8915_AIF1TX_CHAN1_DAT_INV_SHIFT 15 /* AIF1TX_CHAN1_DAT_INV */ -#define WM8915_AIF1TX_CHAN1_DAT_INV_WIDTH 1 /* AIF1TX_CHAN1_DAT_INV */ -#define WM8915_AIF1TX_CHAN1_SPACING_MASK 0x7E00 /* AIF1TX_CHAN1_SPACING - [14:9] */ -#define WM8915_AIF1TX_CHAN1_SPACING_SHIFT 9 /* AIF1TX_CHAN1_SPACING - [14:9] */ -#define WM8915_AIF1TX_CHAN1_SPACING_WIDTH 6 /* AIF1TX_CHAN1_SPACING - [14:9] */ -#define WM8915_AIF1TX_CHAN1_SLOTS_MASK 0x01C0 /* AIF1TX_CHAN1_SLOTS - [8:6] */ -#define WM8915_AIF1TX_CHAN1_SLOTS_SHIFT 6 /* AIF1TX_CHAN1_SLOTS - [8:6] */ -#define WM8915_AIF1TX_CHAN1_SLOTS_WIDTH 3 /* AIF1TX_CHAN1_SLOTS - [8:6] */ -#define WM8915_AIF1TX_CHAN1_START_SLOT_MASK 0x003F /* AIF1TX_CHAN1_START_SLOT - [5:0] */ -#define WM8915_AIF1TX_CHAN1_START_SLOT_SHIFT 0 /* AIF1TX_CHAN1_START_SLOT - [5:0] */ -#define WM8915_AIF1TX_CHAN1_START_SLOT_WIDTH 6 /* AIF1TX_CHAN1_START_SLOT - [5:0] */ - -/* - * R779 (0x30B) - AIF1TX Channel 2 Configuration - */ -#define WM8915_AIF1TX_CHAN2_DAT_INV 0x8000 /* AIF1TX_CHAN2_DAT_INV */ -#define WM8915_AIF1TX_CHAN2_DAT_INV_MASK 0x8000 /* AIF1TX_CHAN2_DAT_INV */ -#define WM8915_AIF1TX_CHAN2_DAT_INV_SHIFT 15 /* AIF1TX_CHAN2_DAT_INV */ -#define WM8915_AIF1TX_CHAN2_DAT_INV_WIDTH 1 /* AIF1TX_CHAN2_DAT_INV */ -#define WM8915_AIF1TX_CHAN2_SPACING_MASK 0x7E00 /* AIF1TX_CHAN2_SPACING - [14:9] */ -#define WM8915_AIF1TX_CHAN2_SPACING_SHIFT 9 /* AIF1TX_CHAN2_SPACING - [14:9] */ -#define WM8915_AIF1TX_CHAN2_SPACING_WIDTH 6 /* AIF1TX_CHAN2_SPACING - [14:9] */ -#define WM8915_AIF1TX_CHAN2_SLOTS_MASK 0x01C0 /* AIF1TX_CHAN2_SLOTS - [8:6] */ -#define WM8915_AIF1TX_CHAN2_SLOTS_SHIFT 6 /* AIF1TX_CHAN2_SLOTS - [8:6] */ -#define WM8915_AIF1TX_CHAN2_SLOTS_WIDTH 3 /* AIF1TX_CHAN2_SLOTS - [8:6] */ -#define WM8915_AIF1TX_CHAN2_START_SLOT_MASK 0x003F /* AIF1TX_CHAN2_START_SLOT - [5:0] */ -#define WM8915_AIF1TX_CHAN2_START_SLOT_SHIFT 0 /* AIF1TX_CHAN2_START_SLOT - [5:0] */ -#define WM8915_AIF1TX_CHAN2_START_SLOT_WIDTH 6 /* AIF1TX_CHAN2_START_SLOT - [5:0] */ - -/* - * R780 (0x30C) - AIF1TX Channel 3 Configuration - */ -#define WM8915_AIF1TX_CHAN3_DAT_INV 0x8000 /* AIF1TX_CHAN3_DAT_INV */ -#define WM8915_AIF1TX_CHAN3_DAT_INV_MASK 0x8000 /* AIF1TX_CHAN3_DAT_INV */ -#define WM8915_AIF1TX_CHAN3_DAT_INV_SHIFT 15 /* AIF1TX_CHAN3_DAT_INV */ -#define WM8915_AIF1TX_CHAN3_DAT_INV_WIDTH 1 /* AIF1TX_CHAN3_DAT_INV */ -#define WM8915_AIF1TX_CHAN3_SPACING_MASK 0x7E00 /* AIF1TX_CHAN3_SPACING - [14:9] */ -#define WM8915_AIF1TX_CHAN3_SPACING_SHIFT 9 /* AIF1TX_CHAN3_SPACING - [14:9] */ -#define WM8915_AIF1TX_CHAN3_SPACING_WIDTH 6 /* AIF1TX_CHAN3_SPACING - [14:9] */ -#define WM8915_AIF1TX_CHAN3_SLOTS_MASK 0x01C0 /* AIF1TX_CHAN3_SLOTS - [8:6] */ -#define WM8915_AIF1TX_CHAN3_SLOTS_SHIFT 6 /* AIF1TX_CHAN3_SLOTS - [8:6] */ -#define WM8915_AIF1TX_CHAN3_SLOTS_WIDTH 3 /* AIF1TX_CHAN3_SLOTS - [8:6] */ -#define WM8915_AIF1TX_CHAN3_START_SLOT_MASK 0x003F /* AIF1TX_CHAN3_START_SLOT - [5:0] */ -#define WM8915_AIF1TX_CHAN3_START_SLOT_SHIFT 0 /* AIF1TX_CHAN3_START_SLOT - [5:0] */ -#define WM8915_AIF1TX_CHAN3_START_SLOT_WIDTH 6 /* AIF1TX_CHAN3_START_SLOT - [5:0] */ - -/* - * R781 (0x30D) - AIF1TX Channel 4 Configuration - */ -#define WM8915_AIF1TX_CHAN4_DAT_INV 0x8000 /* AIF1TX_CHAN4_DAT_INV */ -#define WM8915_AIF1TX_CHAN4_DAT_INV_MASK 0x8000 /* AIF1TX_CHAN4_DAT_INV */ -#define WM8915_AIF1TX_CHAN4_DAT_INV_SHIFT 15 /* AIF1TX_CHAN4_DAT_INV */ -#define WM8915_AIF1TX_CHAN4_DAT_INV_WIDTH 1 /* AIF1TX_CHAN4_DAT_INV */ -#define WM8915_AIF1TX_CHAN4_SPACING_MASK 0x7E00 /* AIF1TX_CHAN4_SPACING - [14:9] */ -#define WM8915_AIF1TX_CHAN4_SPACING_SHIFT 9 /* AIF1TX_CHAN4_SPACING - [14:9] */ -#define WM8915_AIF1TX_CHAN4_SPACING_WIDTH 6 /* AIF1TX_CHAN4_SPACING - [14:9] */ -#define WM8915_AIF1TX_CHAN4_SLOTS_MASK 0x01C0 /* AIF1TX_CHAN4_SLOTS - [8:6] */ -#define WM8915_AIF1TX_CHAN4_SLOTS_SHIFT 6 /* AIF1TX_CHAN4_SLOTS - [8:6] */ -#define WM8915_AIF1TX_CHAN4_SLOTS_WIDTH 3 /* AIF1TX_CHAN4_SLOTS - [8:6] */ -#define WM8915_AIF1TX_CHAN4_START_SLOT_MASK 0x003F /* AIF1TX_CHAN4_START_SLOT - [5:0] */ -#define WM8915_AIF1TX_CHAN4_START_SLOT_SHIFT 0 /* AIF1TX_CHAN4_START_SLOT - [5:0] */ -#define WM8915_AIF1TX_CHAN4_START_SLOT_WIDTH 6 /* AIF1TX_CHAN4_START_SLOT - [5:0] */ - -/* - * R782 (0x30E) - AIF1TX Channel 5 Configuration - */ -#define WM8915_AIF1TX_CHAN5_DAT_INV 0x8000 /* AIF1TX_CHAN5_DAT_INV */ -#define WM8915_AIF1TX_CHAN5_DAT_INV_MASK 0x8000 /* AIF1TX_CHAN5_DAT_INV */ -#define WM8915_AIF1TX_CHAN5_DAT_INV_SHIFT 15 /* AIF1TX_CHAN5_DAT_INV */ -#define WM8915_AIF1TX_CHAN5_DAT_INV_WIDTH 1 /* AIF1TX_CHAN5_DAT_INV */ -#define WM8915_AIF1TX_CHAN5_SPACING_MASK 0x7E00 /* AIF1TX_CHAN5_SPACING - [14:9] */ -#define WM8915_AIF1TX_CHAN5_SPACING_SHIFT 9 /* AIF1TX_CHAN5_SPACING - [14:9] */ -#define WM8915_AIF1TX_CHAN5_SPACING_WIDTH 6 /* AIF1TX_CHAN5_SPACING - [14:9] */ -#define WM8915_AIF1TX_CHAN5_SLOTS_MASK 0x01C0 /* AIF1TX_CHAN5_SLOTS - [8:6] */ -#define WM8915_AIF1TX_CHAN5_SLOTS_SHIFT 6 /* AIF1TX_CHAN5_SLOTS - [8:6] */ -#define WM8915_AIF1TX_CHAN5_SLOTS_WIDTH 3 /* AIF1TX_CHAN5_SLOTS - [8:6] */ -#define WM8915_AIF1TX_CHAN5_START_SLOT_MASK 0x003F /* AIF1TX_CHAN5_START_SLOT - [5:0] */ -#define WM8915_AIF1TX_CHAN5_START_SLOT_SHIFT 0 /* AIF1TX_CHAN5_START_SLOT - [5:0] */ -#define WM8915_AIF1TX_CHAN5_START_SLOT_WIDTH 6 /* AIF1TX_CHAN5_START_SLOT - [5:0] */ - -/* - * R783 (0x30F) - AIF1RX Channel 0 Configuration - */ -#define WM8915_AIF1RX_CHAN0_DAT_INV 0x8000 /* AIF1RX_CHAN0_DAT_INV */ -#define WM8915_AIF1RX_CHAN0_DAT_INV_MASK 0x8000 /* AIF1RX_CHAN0_DAT_INV */ -#define WM8915_AIF1RX_CHAN0_DAT_INV_SHIFT 15 /* AIF1RX_CHAN0_DAT_INV */ -#define WM8915_AIF1RX_CHAN0_DAT_INV_WIDTH 1 /* AIF1RX_CHAN0_DAT_INV */ -#define WM8915_AIF1RX_CHAN0_SPACING_MASK 0x7E00 /* AIF1RX_CHAN0_SPACING - [14:9] */ -#define WM8915_AIF1RX_CHAN0_SPACING_SHIFT 9 /* AIF1RX_CHAN0_SPACING - [14:9] */ -#define WM8915_AIF1RX_CHAN0_SPACING_WIDTH 6 /* AIF1RX_CHAN0_SPACING - [14:9] */ -#define WM8915_AIF1RX_CHAN0_SLOTS_MASK 0x01C0 /* AIF1RX_CHAN0_SLOTS - [8:6] */ -#define WM8915_AIF1RX_CHAN0_SLOTS_SHIFT 6 /* AIF1RX_CHAN0_SLOTS - [8:6] */ -#define WM8915_AIF1RX_CHAN0_SLOTS_WIDTH 3 /* AIF1RX_CHAN0_SLOTS - [8:6] */ -#define WM8915_AIF1RX_CHAN0_START_SLOT_MASK 0x003F /* AIF1RX_CHAN0_START_SLOT - [5:0] */ -#define WM8915_AIF1RX_CHAN0_START_SLOT_SHIFT 0 /* AIF1RX_CHAN0_START_SLOT - [5:0] */ -#define WM8915_AIF1RX_CHAN0_START_SLOT_WIDTH 6 /* AIF1RX_CHAN0_START_SLOT - [5:0] */ - -/* - * R784 (0x310) - AIF1RX Channel 1 Configuration - */ -#define WM8915_AIF1RX_CHAN1_DAT_INV 0x8000 /* AIF1RX_CHAN1_DAT_INV */ -#define WM8915_AIF1RX_CHAN1_DAT_INV_MASK 0x8000 /* AIF1RX_CHAN1_DAT_INV */ -#define WM8915_AIF1RX_CHAN1_DAT_INV_SHIFT 15 /* AIF1RX_CHAN1_DAT_INV */ -#define WM8915_AIF1RX_CHAN1_DAT_INV_WIDTH 1 /* AIF1RX_CHAN1_DAT_INV */ -#define WM8915_AIF1RX_CHAN1_SPACING_MASK 0x7E00 /* AIF1RX_CHAN1_SPACING - [14:9] */ -#define WM8915_AIF1RX_CHAN1_SPACING_SHIFT 9 /* AIF1RX_CHAN1_SPACING - [14:9] */ -#define WM8915_AIF1RX_CHAN1_SPACING_WIDTH 6 /* AIF1RX_CHAN1_SPACING - [14:9] */ -#define WM8915_AIF1RX_CHAN1_SLOTS_MASK 0x01C0 /* AIF1RX_CHAN1_SLOTS - [8:6] */ -#define WM8915_AIF1RX_CHAN1_SLOTS_SHIFT 6 /* AIF1RX_CHAN1_SLOTS - [8:6] */ -#define WM8915_AIF1RX_CHAN1_SLOTS_WIDTH 3 /* AIF1RX_CHAN1_SLOTS - [8:6] */ -#define WM8915_AIF1RX_CHAN1_START_SLOT_MASK 0x003F /* AIF1RX_CHAN1_START_SLOT - [5:0] */ -#define WM8915_AIF1RX_CHAN1_START_SLOT_SHIFT 0 /* AIF1RX_CHAN1_START_SLOT - [5:0] */ -#define WM8915_AIF1RX_CHAN1_START_SLOT_WIDTH 6 /* AIF1RX_CHAN1_START_SLOT - [5:0] */ - -/* - * R785 (0x311) - AIF1RX Channel 2 Configuration - */ -#define WM8915_AIF1RX_CHAN2_DAT_INV 0x8000 /* AIF1RX_CHAN2_DAT_INV */ -#define WM8915_AIF1RX_CHAN2_DAT_INV_MASK 0x8000 /* AIF1RX_CHAN2_DAT_INV */ -#define WM8915_AIF1RX_CHAN2_DAT_INV_SHIFT 15 /* AIF1RX_CHAN2_DAT_INV */ -#define WM8915_AIF1RX_CHAN2_DAT_INV_WIDTH 1 /* AIF1RX_CHAN2_DAT_INV */ -#define WM8915_AIF1RX_CHAN2_SPACING_MASK 0x7E00 /* AIF1RX_CHAN2_SPACING - [14:9] */ -#define WM8915_AIF1RX_CHAN2_SPACING_SHIFT 9 /* AIF1RX_CHAN2_SPACING - [14:9] */ -#define WM8915_AIF1RX_CHAN2_SPACING_WIDTH 6 /* AIF1RX_CHAN2_SPACING - [14:9] */ -#define WM8915_AIF1RX_CHAN2_SLOTS_MASK 0x01C0 /* AIF1RX_CHAN2_SLOTS - [8:6] */ -#define WM8915_AIF1RX_CHAN2_SLOTS_SHIFT 6 /* AIF1RX_CHAN2_SLOTS - [8:6] */ -#define WM8915_AIF1RX_CHAN2_SLOTS_WIDTH 3 /* AIF1RX_CHAN2_SLOTS - [8:6] */ -#define WM8915_AIF1RX_CHAN2_START_SLOT_MASK 0x003F /* AIF1RX_CHAN2_START_SLOT - [5:0] */ -#define WM8915_AIF1RX_CHAN2_START_SLOT_SHIFT 0 /* AIF1RX_CHAN2_START_SLOT - [5:0] */ -#define WM8915_AIF1RX_CHAN2_START_SLOT_WIDTH 6 /* AIF1RX_CHAN2_START_SLOT - [5:0] */ - -/* - * R786 (0x312) - AIF1RX Channel 3 Configuration - */ -#define WM8915_AIF1RX_CHAN3_DAT_INV 0x8000 /* AIF1RX_CHAN3_DAT_INV */ -#define WM8915_AIF1RX_CHAN3_DAT_INV_MASK 0x8000 /* AIF1RX_CHAN3_DAT_INV */ -#define WM8915_AIF1RX_CHAN3_DAT_INV_SHIFT 15 /* AIF1RX_CHAN3_DAT_INV */ -#define WM8915_AIF1RX_CHAN3_DAT_INV_WIDTH 1 /* AIF1RX_CHAN3_DAT_INV */ -#define WM8915_AIF1RX_CHAN3_SPACING_MASK 0x7E00 /* AIF1RX_CHAN3_SPACING - [14:9] */ -#define WM8915_AIF1RX_CHAN3_SPACING_SHIFT 9 /* AIF1RX_CHAN3_SPACING - [14:9] */ -#define WM8915_AIF1RX_CHAN3_SPACING_WIDTH 6 /* AIF1RX_CHAN3_SPACING - [14:9] */ -#define WM8915_AIF1RX_CHAN3_SLOTS_MASK 0x01C0 /* AIF1RX_CHAN3_SLOTS - [8:6] */ -#define WM8915_AIF1RX_CHAN3_SLOTS_SHIFT 6 /* AIF1RX_CHAN3_SLOTS - [8:6] */ -#define WM8915_AIF1RX_CHAN3_SLOTS_WIDTH 3 /* AIF1RX_CHAN3_SLOTS - [8:6] */ -#define WM8915_AIF1RX_CHAN3_START_SLOT_MASK 0x003F /* AIF1RX_CHAN3_START_SLOT - [5:0] */ -#define WM8915_AIF1RX_CHAN3_START_SLOT_SHIFT 0 /* AIF1RX_CHAN3_START_SLOT - [5:0] */ -#define WM8915_AIF1RX_CHAN3_START_SLOT_WIDTH 6 /* AIF1RX_CHAN3_START_SLOT - [5:0] */ - -/* - * R787 (0x313) - AIF1RX Channel 4 Configuration - */ -#define WM8915_AIF1RX_CHAN4_DAT_INV 0x8000 /* AIF1RX_CHAN4_DAT_INV */ -#define WM8915_AIF1RX_CHAN4_DAT_INV_MASK 0x8000 /* AIF1RX_CHAN4_DAT_INV */ -#define WM8915_AIF1RX_CHAN4_DAT_INV_SHIFT 15 /* AIF1RX_CHAN4_DAT_INV */ -#define WM8915_AIF1RX_CHAN4_DAT_INV_WIDTH 1 /* AIF1RX_CHAN4_DAT_INV */ -#define WM8915_AIF1RX_CHAN4_SPACING_MASK 0x7E00 /* AIF1RX_CHAN4_SPACING - [14:9] */ -#define WM8915_AIF1RX_CHAN4_SPACING_SHIFT 9 /* AIF1RX_CHAN4_SPACING - [14:9] */ -#define WM8915_AIF1RX_CHAN4_SPACING_WIDTH 6 /* AIF1RX_CHAN4_SPACING - [14:9] */ -#define WM8915_AIF1RX_CHAN4_SLOTS_MASK 0x01C0 /* AIF1RX_CHAN4_SLOTS - [8:6] */ -#define WM8915_AIF1RX_CHAN4_SLOTS_SHIFT 6 /* AIF1RX_CHAN4_SLOTS - [8:6] */ -#define WM8915_AIF1RX_CHAN4_SLOTS_WIDTH 3 /* AIF1RX_CHAN4_SLOTS - [8:6] */ -#define WM8915_AIF1RX_CHAN4_START_SLOT_MASK 0x003F /* AIF1RX_CHAN4_START_SLOT - [5:0] */ -#define WM8915_AIF1RX_CHAN4_START_SLOT_SHIFT 0 /* AIF1RX_CHAN4_START_SLOT - [5:0] */ -#define WM8915_AIF1RX_CHAN4_START_SLOT_WIDTH 6 /* AIF1RX_CHAN4_START_SLOT - [5:0] */ - -/* - * R788 (0x314) - AIF1RX Channel 5 Configuration - */ -#define WM8915_AIF1RX_CHAN5_DAT_INV 0x8000 /* AIF1RX_CHAN5_DAT_INV */ -#define WM8915_AIF1RX_CHAN5_DAT_INV_MASK 0x8000 /* AIF1RX_CHAN5_DAT_INV */ -#define WM8915_AIF1RX_CHAN5_DAT_INV_SHIFT 15 /* AIF1RX_CHAN5_DAT_INV */ -#define WM8915_AIF1RX_CHAN5_DAT_INV_WIDTH 1 /* AIF1RX_CHAN5_DAT_INV */ -#define WM8915_AIF1RX_CHAN5_SPACING_MASK 0x7E00 /* AIF1RX_CHAN5_SPACING - [14:9] */ -#define WM8915_AIF1RX_CHAN5_SPACING_SHIFT 9 /* AIF1RX_CHAN5_SPACING - [14:9] */ -#define WM8915_AIF1RX_CHAN5_SPACING_WIDTH 6 /* AIF1RX_CHAN5_SPACING - [14:9] */ -#define WM8915_AIF1RX_CHAN5_SLOTS_MASK 0x01C0 /* AIF1RX_CHAN5_SLOTS - [8:6] */ -#define WM8915_AIF1RX_CHAN5_SLOTS_SHIFT 6 /* AIF1RX_CHAN5_SLOTS - [8:6] */ -#define WM8915_AIF1RX_CHAN5_SLOTS_WIDTH 3 /* AIF1RX_CHAN5_SLOTS - [8:6] */ -#define WM8915_AIF1RX_CHAN5_START_SLOT_MASK 0x003F /* AIF1RX_CHAN5_START_SLOT - [5:0] */ -#define WM8915_AIF1RX_CHAN5_START_SLOT_SHIFT 0 /* AIF1RX_CHAN5_START_SLOT - [5:0] */ -#define WM8915_AIF1RX_CHAN5_START_SLOT_WIDTH 6 /* AIF1RX_CHAN5_START_SLOT - [5:0] */ - -/* - * R789 (0x315) - AIF1RX Mono Configuration - */ -#define WM8915_AIF1RX_CHAN4_MONO_MODE 0x0004 /* AIF1RX_CHAN4_MONO_MODE */ -#define WM8915_AIF1RX_CHAN4_MONO_MODE_MASK 0x0004 /* AIF1RX_CHAN4_MONO_MODE */ -#define WM8915_AIF1RX_CHAN4_MONO_MODE_SHIFT 2 /* AIF1RX_CHAN4_MONO_MODE */ -#define WM8915_AIF1RX_CHAN4_MONO_MODE_WIDTH 1 /* AIF1RX_CHAN4_MONO_MODE */ -#define WM8915_AIF1RX_CHAN2_MONO_MODE 0x0002 /* AIF1RX_CHAN2_MONO_MODE */ -#define WM8915_AIF1RX_CHAN2_MONO_MODE_MASK 0x0002 /* AIF1RX_CHAN2_MONO_MODE */ -#define WM8915_AIF1RX_CHAN2_MONO_MODE_SHIFT 1 /* AIF1RX_CHAN2_MONO_MODE */ -#define WM8915_AIF1RX_CHAN2_MONO_MODE_WIDTH 1 /* AIF1RX_CHAN2_MONO_MODE */ -#define WM8915_AIF1RX_CHAN0_MONO_MODE 0x0001 /* AIF1RX_CHAN0_MONO_MODE */ -#define WM8915_AIF1RX_CHAN0_MONO_MODE_MASK 0x0001 /* AIF1RX_CHAN0_MONO_MODE */ -#define WM8915_AIF1RX_CHAN0_MONO_MODE_SHIFT 0 /* AIF1RX_CHAN0_MONO_MODE */ -#define WM8915_AIF1RX_CHAN0_MONO_MODE_WIDTH 1 /* AIF1RX_CHAN0_MONO_MODE */ - -/* - * R794 (0x31A) - AIF1TX Test - */ -#define WM8915_AIF1TX45_DITHER_ENA 0x0004 /* AIF1TX45_DITHER_ENA */ -#define WM8915_AIF1TX45_DITHER_ENA_MASK 0x0004 /* AIF1TX45_DITHER_ENA */ -#define WM8915_AIF1TX45_DITHER_ENA_SHIFT 2 /* AIF1TX45_DITHER_ENA */ -#define WM8915_AIF1TX45_DITHER_ENA_WIDTH 1 /* AIF1TX45_DITHER_ENA */ -#define WM8915_AIF1TX23_DITHER_ENA 0x0002 /* AIF1TX23_DITHER_ENA */ -#define WM8915_AIF1TX23_DITHER_ENA_MASK 0x0002 /* AIF1TX23_DITHER_ENA */ -#define WM8915_AIF1TX23_DITHER_ENA_SHIFT 1 /* AIF1TX23_DITHER_ENA */ -#define WM8915_AIF1TX23_DITHER_ENA_WIDTH 1 /* AIF1TX23_DITHER_ENA */ -#define WM8915_AIF1TX01_DITHER_ENA 0x0001 /* AIF1TX01_DITHER_ENA */ -#define WM8915_AIF1TX01_DITHER_ENA_MASK 0x0001 /* AIF1TX01_DITHER_ENA */ -#define WM8915_AIF1TX01_DITHER_ENA_SHIFT 0 /* AIF1TX01_DITHER_ENA */ -#define WM8915_AIF1TX01_DITHER_ENA_WIDTH 1 /* AIF1TX01_DITHER_ENA */ - -/* - * R800 (0x320) - AIF2 Control - */ -#define WM8915_AIF2_TRI 0x0004 /* AIF2_TRI */ -#define WM8915_AIF2_TRI_MASK 0x0004 /* AIF2_TRI */ -#define WM8915_AIF2_TRI_SHIFT 2 /* AIF2_TRI */ -#define WM8915_AIF2_TRI_WIDTH 1 /* AIF2_TRI */ -#define WM8915_AIF2_FMT_MASK 0x0003 /* AIF2_FMT - [1:0] */ -#define WM8915_AIF2_FMT_SHIFT 0 /* AIF2_FMT - [1:0] */ -#define WM8915_AIF2_FMT_WIDTH 2 /* AIF2_FMT - [1:0] */ - -/* - * R801 (0x321) - AIF2 BCLK - */ -#define WM8915_AIF2_BCLK_INV 0x0400 /* AIF2_BCLK_INV */ -#define WM8915_AIF2_BCLK_INV_MASK 0x0400 /* AIF2_BCLK_INV */ -#define WM8915_AIF2_BCLK_INV_SHIFT 10 /* AIF2_BCLK_INV */ -#define WM8915_AIF2_BCLK_INV_WIDTH 1 /* AIF2_BCLK_INV */ -#define WM8915_AIF2_BCLK_FRC 0x0200 /* AIF2_BCLK_FRC */ -#define WM8915_AIF2_BCLK_FRC_MASK 0x0200 /* AIF2_BCLK_FRC */ -#define WM8915_AIF2_BCLK_FRC_SHIFT 9 /* AIF2_BCLK_FRC */ -#define WM8915_AIF2_BCLK_FRC_WIDTH 1 /* AIF2_BCLK_FRC */ -#define WM8915_AIF2_BCLK_MSTR 0x0100 /* AIF2_BCLK_MSTR */ -#define WM8915_AIF2_BCLK_MSTR_MASK 0x0100 /* AIF2_BCLK_MSTR */ -#define WM8915_AIF2_BCLK_MSTR_SHIFT 8 /* AIF2_BCLK_MSTR */ -#define WM8915_AIF2_BCLK_MSTR_WIDTH 1 /* AIF2_BCLK_MSTR */ -#define WM8915_AIF2_BCLK_DIV_MASK 0x000F /* AIF2_BCLK_DIV - [3:0] */ -#define WM8915_AIF2_BCLK_DIV_SHIFT 0 /* AIF2_BCLK_DIV - [3:0] */ -#define WM8915_AIF2_BCLK_DIV_WIDTH 4 /* AIF2_BCLK_DIV - [3:0] */ - -/* - * R802 (0x322) - AIF2 TX LRCLK(1) - */ -#define WM8915_AIF2TX_RATE_MASK 0x07FF /* AIF2TX_RATE - [10:0] */ -#define WM8915_AIF2TX_RATE_SHIFT 0 /* AIF2TX_RATE - [10:0] */ -#define WM8915_AIF2TX_RATE_WIDTH 11 /* AIF2TX_RATE - [10:0] */ - -/* - * R803 (0x323) - AIF2 TX LRCLK(2) - */ -#define WM8915_AIF2TX_LRCLK_MODE 0x0008 /* AIF2TX_LRCLK_MODE */ -#define WM8915_AIF2TX_LRCLK_MODE_MASK 0x0008 /* AIF2TX_LRCLK_MODE */ -#define WM8915_AIF2TX_LRCLK_MODE_SHIFT 3 /* AIF2TX_LRCLK_MODE */ -#define WM8915_AIF2TX_LRCLK_MODE_WIDTH 1 /* AIF2TX_LRCLK_MODE */ -#define WM8915_AIF2TX_LRCLK_INV 0x0004 /* AIF2TX_LRCLK_INV */ -#define WM8915_AIF2TX_LRCLK_INV_MASK 0x0004 /* AIF2TX_LRCLK_INV */ -#define WM8915_AIF2TX_LRCLK_INV_SHIFT 2 /* AIF2TX_LRCLK_INV */ -#define WM8915_AIF2TX_LRCLK_INV_WIDTH 1 /* AIF2TX_LRCLK_INV */ -#define WM8915_AIF2TX_LRCLK_FRC 0x0002 /* AIF2TX_LRCLK_FRC */ -#define WM8915_AIF2TX_LRCLK_FRC_MASK 0x0002 /* AIF2TX_LRCLK_FRC */ -#define WM8915_AIF2TX_LRCLK_FRC_SHIFT 1 /* AIF2TX_LRCLK_FRC */ -#define WM8915_AIF2TX_LRCLK_FRC_WIDTH 1 /* AIF2TX_LRCLK_FRC */ -#define WM8915_AIF2TX_LRCLK_MSTR 0x0001 /* AIF2TX_LRCLK_MSTR */ -#define WM8915_AIF2TX_LRCLK_MSTR_MASK 0x0001 /* AIF2TX_LRCLK_MSTR */ -#define WM8915_AIF2TX_LRCLK_MSTR_SHIFT 0 /* AIF2TX_LRCLK_MSTR */ -#define WM8915_AIF2TX_LRCLK_MSTR_WIDTH 1 /* AIF2TX_LRCLK_MSTR */ - -/* - * R804 (0x324) - AIF2 RX LRCLK(1) - */ -#define WM8915_AIF2RX_RATE_MASK 0x07FF /* AIF2RX_RATE - [10:0] */ -#define WM8915_AIF2RX_RATE_SHIFT 0 /* AIF2RX_RATE - [10:0] */ -#define WM8915_AIF2RX_RATE_WIDTH 11 /* AIF2RX_RATE - [10:0] */ - -/* - * R805 (0x325) - AIF2 RX LRCLK(2) - */ -#define WM8915_AIF2RX_LRCLK_INV 0x0004 /* AIF2RX_LRCLK_INV */ -#define WM8915_AIF2RX_LRCLK_INV_MASK 0x0004 /* AIF2RX_LRCLK_INV */ -#define WM8915_AIF2RX_LRCLK_INV_SHIFT 2 /* AIF2RX_LRCLK_INV */ -#define WM8915_AIF2RX_LRCLK_INV_WIDTH 1 /* AIF2RX_LRCLK_INV */ -#define WM8915_AIF2RX_LRCLK_FRC 0x0002 /* AIF2RX_LRCLK_FRC */ -#define WM8915_AIF2RX_LRCLK_FRC_MASK 0x0002 /* AIF2RX_LRCLK_FRC */ -#define WM8915_AIF2RX_LRCLK_FRC_SHIFT 1 /* AIF2RX_LRCLK_FRC */ -#define WM8915_AIF2RX_LRCLK_FRC_WIDTH 1 /* AIF2RX_LRCLK_FRC */ -#define WM8915_AIF2RX_LRCLK_MSTR 0x0001 /* AIF2RX_LRCLK_MSTR */ -#define WM8915_AIF2RX_LRCLK_MSTR_MASK 0x0001 /* AIF2RX_LRCLK_MSTR */ -#define WM8915_AIF2RX_LRCLK_MSTR_SHIFT 0 /* AIF2RX_LRCLK_MSTR */ -#define WM8915_AIF2RX_LRCLK_MSTR_WIDTH 1 /* AIF2RX_LRCLK_MSTR */ - -/* - * R806 (0x326) - AIF2TX Data Configuration (1) - */ -#define WM8915_AIF2TX_WL_MASK 0xFF00 /* AIF2TX_WL - [15:8] */ -#define WM8915_AIF2TX_WL_SHIFT 8 /* AIF2TX_WL - [15:8] */ -#define WM8915_AIF2TX_WL_WIDTH 8 /* AIF2TX_WL - [15:8] */ -#define WM8915_AIF2TX_SLOT_LEN_MASK 0x00FF /* AIF2TX_SLOT_LEN - [7:0] */ -#define WM8915_AIF2TX_SLOT_LEN_SHIFT 0 /* AIF2TX_SLOT_LEN - [7:0] */ -#define WM8915_AIF2TX_SLOT_LEN_WIDTH 8 /* AIF2TX_SLOT_LEN - [7:0] */ - -/* - * R807 (0x327) - AIF2TX Data Configuration (2) - */ -#define WM8915_AIF2TX_DAT_TRI 0x0001 /* AIF2TX_DAT_TRI */ -#define WM8915_AIF2TX_DAT_TRI_MASK 0x0001 /* AIF2TX_DAT_TRI */ -#define WM8915_AIF2TX_DAT_TRI_SHIFT 0 /* AIF2TX_DAT_TRI */ -#define WM8915_AIF2TX_DAT_TRI_WIDTH 1 /* AIF2TX_DAT_TRI */ - -/* - * R808 (0x328) - AIF2RX Data Configuration - */ -#define WM8915_AIF2RX_WL_MASK 0xFF00 /* AIF2RX_WL - [15:8] */ -#define WM8915_AIF2RX_WL_SHIFT 8 /* AIF2RX_WL - [15:8] */ -#define WM8915_AIF2RX_WL_WIDTH 8 /* AIF2RX_WL - [15:8] */ -#define WM8915_AIF2RX_SLOT_LEN_MASK 0x00FF /* AIF2RX_SLOT_LEN - [7:0] */ -#define WM8915_AIF2RX_SLOT_LEN_SHIFT 0 /* AIF2RX_SLOT_LEN - [7:0] */ -#define WM8915_AIF2RX_SLOT_LEN_WIDTH 8 /* AIF2RX_SLOT_LEN - [7:0] */ - -/* - * R809 (0x329) - AIF2TX Channel 0 Configuration - */ -#define WM8915_AIF2TX_CHAN0_DAT_INV 0x8000 /* AIF2TX_CHAN0_DAT_INV */ -#define WM8915_AIF2TX_CHAN0_DAT_INV_MASK 0x8000 /* AIF2TX_CHAN0_DAT_INV */ -#define WM8915_AIF2TX_CHAN0_DAT_INV_SHIFT 15 /* AIF2TX_CHAN0_DAT_INV */ -#define WM8915_AIF2TX_CHAN0_DAT_INV_WIDTH 1 /* AIF2TX_CHAN0_DAT_INV */ -#define WM8915_AIF2TX_CHAN0_SPACING_MASK 0x7E00 /* AIF2TX_CHAN0_SPACING - [14:9] */ -#define WM8915_AIF2TX_CHAN0_SPACING_SHIFT 9 /* AIF2TX_CHAN0_SPACING - [14:9] */ -#define WM8915_AIF2TX_CHAN0_SPACING_WIDTH 6 /* AIF2TX_CHAN0_SPACING - [14:9] */ -#define WM8915_AIF2TX_CHAN0_SLOTS_MASK 0x01C0 /* AIF2TX_CHAN0_SLOTS - [8:6] */ -#define WM8915_AIF2TX_CHAN0_SLOTS_SHIFT 6 /* AIF2TX_CHAN0_SLOTS - [8:6] */ -#define WM8915_AIF2TX_CHAN0_SLOTS_WIDTH 3 /* AIF2TX_CHAN0_SLOTS - [8:6] */ -#define WM8915_AIF2TX_CHAN0_START_SLOT_MASK 0x003F /* AIF2TX_CHAN0_START_SLOT - [5:0] */ -#define WM8915_AIF2TX_CHAN0_START_SLOT_SHIFT 0 /* AIF2TX_CHAN0_START_SLOT - [5:0] */ -#define WM8915_AIF2TX_CHAN0_START_SLOT_WIDTH 6 /* AIF2TX_CHAN0_START_SLOT - [5:0] */ - -/* - * R810 (0x32A) - AIF2TX Channel 1 Configuration - */ -#define WM8915_AIF2TX_CHAN1_DAT_INV 0x8000 /* AIF2TX_CHAN1_DAT_INV */ -#define WM8915_AIF2TX_CHAN1_DAT_INV_MASK 0x8000 /* AIF2TX_CHAN1_DAT_INV */ -#define WM8915_AIF2TX_CHAN1_DAT_INV_SHIFT 15 /* AIF2TX_CHAN1_DAT_INV */ -#define WM8915_AIF2TX_CHAN1_DAT_INV_WIDTH 1 /* AIF2TX_CHAN1_DAT_INV */ -#define WM8915_AIF2TX_CHAN1_SPACING_MASK 0x7E00 /* AIF2TX_CHAN1_SPACING - [14:9] */ -#define WM8915_AIF2TX_CHAN1_SPACING_SHIFT 9 /* AIF2TX_CHAN1_SPACING - [14:9] */ -#define WM8915_AIF2TX_CHAN1_SPACING_WIDTH 6 /* AIF2TX_CHAN1_SPACING - [14:9] */ -#define WM8915_AIF2TX_CHAN1_SLOTS_MASK 0x01C0 /* AIF2TX_CHAN1_SLOTS - [8:6] */ -#define WM8915_AIF2TX_CHAN1_SLOTS_SHIFT 6 /* AIF2TX_CHAN1_SLOTS - [8:6] */ -#define WM8915_AIF2TX_CHAN1_SLOTS_WIDTH 3 /* AIF2TX_CHAN1_SLOTS - [8:6] */ -#define WM8915_AIF2TX_CHAN1_START_SLOT_MASK 0x003F /* AIF2TX_CHAN1_START_SLOT - [5:0] */ -#define WM8915_AIF2TX_CHAN1_START_SLOT_SHIFT 0 /* AIF2TX_CHAN1_START_SLOT - [5:0] */ -#define WM8915_AIF2TX_CHAN1_START_SLOT_WIDTH 6 /* AIF2TX_CHAN1_START_SLOT - [5:0] */ - -/* - * R811 (0x32B) - AIF2RX Channel 0 Configuration - */ -#define WM8915_AIF2RX_CHAN0_DAT_INV 0x8000 /* AIF2RX_CHAN0_DAT_INV */ -#define WM8915_AIF2RX_CHAN0_DAT_INV_MASK 0x8000 /* AIF2RX_CHAN0_DAT_INV */ -#define WM8915_AIF2RX_CHAN0_DAT_INV_SHIFT 15 /* AIF2RX_CHAN0_DAT_INV */ -#define WM8915_AIF2RX_CHAN0_DAT_INV_WIDTH 1 /* AIF2RX_CHAN0_DAT_INV */ -#define WM8915_AIF2RX_CHAN0_SPACING_MASK 0x7E00 /* AIF2RX_CHAN0_SPACING - [14:9] */ -#define WM8915_AIF2RX_CHAN0_SPACING_SHIFT 9 /* AIF2RX_CHAN0_SPACING - [14:9] */ -#define WM8915_AIF2RX_CHAN0_SPACING_WIDTH 6 /* AIF2RX_CHAN0_SPACING - [14:9] */ -#define WM8915_AIF2RX_CHAN0_SLOTS_MASK 0x01C0 /* AIF2RX_CHAN0_SLOTS - [8:6] */ -#define WM8915_AIF2RX_CHAN0_SLOTS_SHIFT 6 /* AIF2RX_CHAN0_SLOTS - [8:6] */ -#define WM8915_AIF2RX_CHAN0_SLOTS_WIDTH 3 /* AIF2RX_CHAN0_SLOTS - [8:6] */ -#define WM8915_AIF2RX_CHAN0_START_SLOT_MASK 0x003F /* AIF2RX_CHAN0_START_SLOT - [5:0] */ -#define WM8915_AIF2RX_CHAN0_START_SLOT_SHIFT 0 /* AIF2RX_CHAN0_START_SLOT - [5:0] */ -#define WM8915_AIF2RX_CHAN0_START_SLOT_WIDTH 6 /* AIF2RX_CHAN0_START_SLOT - [5:0] */ - -/* - * R812 (0x32C) - AIF2RX Channel 1 Configuration - */ -#define WM8915_AIF2RX_CHAN1_DAT_INV 0x8000 /* AIF2RX_CHAN1_DAT_INV */ -#define WM8915_AIF2RX_CHAN1_DAT_INV_MASK 0x8000 /* AIF2RX_CHAN1_DAT_INV */ -#define WM8915_AIF2RX_CHAN1_DAT_INV_SHIFT 15 /* AIF2RX_CHAN1_DAT_INV */ -#define WM8915_AIF2RX_CHAN1_DAT_INV_WIDTH 1 /* AIF2RX_CHAN1_DAT_INV */ -#define WM8915_AIF2RX_CHAN1_SPACING_MASK 0x7E00 /* AIF2RX_CHAN1_SPACING - [14:9] */ -#define WM8915_AIF2RX_CHAN1_SPACING_SHIFT 9 /* AIF2RX_CHAN1_SPACING - [14:9] */ -#define WM8915_AIF2RX_CHAN1_SPACING_WIDTH 6 /* AIF2RX_CHAN1_SPACING - [14:9] */ -#define WM8915_AIF2RX_CHAN1_SLOTS_MASK 0x01C0 /* AIF2RX_CHAN1_SLOTS - [8:6] */ -#define WM8915_AIF2RX_CHAN1_SLOTS_SHIFT 6 /* AIF2RX_CHAN1_SLOTS - [8:6] */ -#define WM8915_AIF2RX_CHAN1_SLOTS_WIDTH 3 /* AIF2RX_CHAN1_SLOTS - [8:6] */ -#define WM8915_AIF2RX_CHAN1_START_SLOT_MASK 0x003F /* AIF2RX_CHAN1_START_SLOT - [5:0] */ -#define WM8915_AIF2RX_CHAN1_START_SLOT_SHIFT 0 /* AIF2RX_CHAN1_START_SLOT - [5:0] */ -#define WM8915_AIF2RX_CHAN1_START_SLOT_WIDTH 6 /* AIF2RX_CHAN1_START_SLOT - [5:0] */ - -/* - * R813 (0x32D) - AIF2RX Mono Configuration - */ -#define WM8915_AIF2RX_CHAN0_MONO_MODE 0x0001 /* AIF2RX_CHAN0_MONO_MODE */ -#define WM8915_AIF2RX_CHAN0_MONO_MODE_MASK 0x0001 /* AIF2RX_CHAN0_MONO_MODE */ -#define WM8915_AIF2RX_CHAN0_MONO_MODE_SHIFT 0 /* AIF2RX_CHAN0_MONO_MODE */ -#define WM8915_AIF2RX_CHAN0_MONO_MODE_WIDTH 1 /* AIF2RX_CHAN0_MONO_MODE */ - -/* - * R815 (0x32F) - AIF2TX Test - */ -#define WM8915_AIF2TX_DITHER_ENA 0x0001 /* AIF2TX_DITHER_ENA */ -#define WM8915_AIF2TX_DITHER_ENA_MASK 0x0001 /* AIF2TX_DITHER_ENA */ -#define WM8915_AIF2TX_DITHER_ENA_SHIFT 0 /* AIF2TX_DITHER_ENA */ -#define WM8915_AIF2TX_DITHER_ENA_WIDTH 1 /* AIF2TX_DITHER_ENA */ - -/* - * R1024 (0x400) - DSP1 TX Left Volume - */ -#define WM8915_DSP1TX_VU 0x0100 /* DSP1TX_VU */ -#define WM8915_DSP1TX_VU_MASK 0x0100 /* DSP1TX_VU */ -#define WM8915_DSP1TX_VU_SHIFT 8 /* DSP1TX_VU */ -#define WM8915_DSP1TX_VU_WIDTH 1 /* DSP1TX_VU */ -#define WM8915_DSP1TXL_VOL_MASK 0x00FF /* DSP1TXL_VOL - [7:0] */ -#define WM8915_DSP1TXL_VOL_SHIFT 0 /* DSP1TXL_VOL - [7:0] */ -#define WM8915_DSP1TXL_VOL_WIDTH 8 /* DSP1TXL_VOL - [7:0] */ - -/* - * R1025 (0x401) - DSP1 TX Right Volume - */ -#define WM8915_DSP1TX_VU 0x0100 /* DSP1TX_VU */ -#define WM8915_DSP1TX_VU_MASK 0x0100 /* DSP1TX_VU */ -#define WM8915_DSP1TX_VU_SHIFT 8 /* DSP1TX_VU */ -#define WM8915_DSP1TX_VU_WIDTH 1 /* DSP1TX_VU */ -#define WM8915_DSP1TXR_VOL_MASK 0x00FF /* DSP1TXR_VOL - [7:0] */ -#define WM8915_DSP1TXR_VOL_SHIFT 0 /* DSP1TXR_VOL - [7:0] */ -#define WM8915_DSP1TXR_VOL_WIDTH 8 /* DSP1TXR_VOL - [7:0] */ - -/* - * R1026 (0x402) - DSP1 RX Left Volume - */ -#define WM8915_DSP1RX_VU 0x0100 /* DSP1RX_VU */ -#define WM8915_DSP1RX_VU_MASK 0x0100 /* DSP1RX_VU */ -#define WM8915_DSP1RX_VU_SHIFT 8 /* DSP1RX_VU */ -#define WM8915_DSP1RX_VU_WIDTH 1 /* DSP1RX_VU */ -#define WM8915_DSP1RXL_VOL_MASK 0x00FF /* DSP1RXL_VOL - [7:0] */ -#define WM8915_DSP1RXL_VOL_SHIFT 0 /* DSP1RXL_VOL - [7:0] */ -#define WM8915_DSP1RXL_VOL_WIDTH 8 /* DSP1RXL_VOL - [7:0] */ - -/* - * R1027 (0x403) - DSP1 RX Right Volume - */ -#define WM8915_DSP1RX_VU 0x0100 /* DSP1RX_VU */ -#define WM8915_DSP1RX_VU_MASK 0x0100 /* DSP1RX_VU */ -#define WM8915_DSP1RX_VU_SHIFT 8 /* DSP1RX_VU */ -#define WM8915_DSP1RX_VU_WIDTH 1 /* DSP1RX_VU */ -#define WM8915_DSP1RXR_VOL_MASK 0x00FF /* DSP1RXR_VOL - [7:0] */ -#define WM8915_DSP1RXR_VOL_SHIFT 0 /* DSP1RXR_VOL - [7:0] */ -#define WM8915_DSP1RXR_VOL_WIDTH 8 /* DSP1RXR_VOL - [7:0] */ - -/* - * R1040 (0x410) - DSP1 TX Filters - */ -#define WM8915_DSP1TX_NF 0x2000 /* DSP1TX_NF */ -#define WM8915_DSP1TX_NF_MASK 0x2000 /* DSP1TX_NF */ -#define WM8915_DSP1TX_NF_SHIFT 13 /* DSP1TX_NF */ -#define WM8915_DSP1TX_NF_WIDTH 1 /* DSP1TX_NF */ -#define WM8915_DSP1TXL_HPF 0x1000 /* DSP1TXL_HPF */ -#define WM8915_DSP1TXL_HPF_MASK 0x1000 /* DSP1TXL_HPF */ -#define WM8915_DSP1TXL_HPF_SHIFT 12 /* DSP1TXL_HPF */ -#define WM8915_DSP1TXL_HPF_WIDTH 1 /* DSP1TXL_HPF */ -#define WM8915_DSP1TXR_HPF 0x0800 /* DSP1TXR_HPF */ -#define WM8915_DSP1TXR_HPF_MASK 0x0800 /* DSP1TXR_HPF */ -#define WM8915_DSP1TXR_HPF_SHIFT 11 /* DSP1TXR_HPF */ -#define WM8915_DSP1TXR_HPF_WIDTH 1 /* DSP1TXR_HPF */ -#define WM8915_DSP1TX_HPF_MODE_MASK 0x0018 /* DSP1TX_HPF_MODE - [4:3] */ -#define WM8915_DSP1TX_HPF_MODE_SHIFT 3 /* DSP1TX_HPF_MODE - [4:3] */ -#define WM8915_DSP1TX_HPF_MODE_WIDTH 2 /* DSP1TX_HPF_MODE - [4:3] */ -#define WM8915_DSP1TX_HPF_CUT_MASK 0x0007 /* DSP1TX_HPF_CUT - [2:0] */ -#define WM8915_DSP1TX_HPF_CUT_SHIFT 0 /* DSP1TX_HPF_CUT - [2:0] */ -#define WM8915_DSP1TX_HPF_CUT_WIDTH 3 /* DSP1TX_HPF_CUT - [2:0] */ - -/* - * R1056 (0x420) - DSP1 RX Filters (1) - */ -#define WM8915_DSP1RX_MUTE 0x0200 /* DSP1RX_MUTE */ -#define WM8915_DSP1RX_MUTE_MASK 0x0200 /* DSP1RX_MUTE */ -#define WM8915_DSP1RX_MUTE_SHIFT 9 /* DSP1RX_MUTE */ -#define WM8915_DSP1RX_MUTE_WIDTH 1 /* DSP1RX_MUTE */ -#define WM8915_DSP1RX_MONO 0x0080 /* DSP1RX_MONO */ -#define WM8915_DSP1RX_MONO_MASK 0x0080 /* DSP1RX_MONO */ -#define WM8915_DSP1RX_MONO_SHIFT 7 /* DSP1RX_MONO */ -#define WM8915_DSP1RX_MONO_WIDTH 1 /* DSP1RX_MONO */ -#define WM8915_DSP1RX_MUTERATE 0x0020 /* DSP1RX_MUTERATE */ -#define WM8915_DSP1RX_MUTERATE_MASK 0x0020 /* DSP1RX_MUTERATE */ -#define WM8915_DSP1RX_MUTERATE_SHIFT 5 /* DSP1RX_MUTERATE */ -#define WM8915_DSP1RX_MUTERATE_WIDTH 1 /* DSP1RX_MUTERATE */ -#define WM8915_DSP1RX_UNMUTE_RAMP 0x0010 /* DSP1RX_UNMUTE_RAMP */ -#define WM8915_DSP1RX_UNMUTE_RAMP_MASK 0x0010 /* DSP1RX_UNMUTE_RAMP */ -#define WM8915_DSP1RX_UNMUTE_RAMP_SHIFT 4 /* DSP1RX_UNMUTE_RAMP */ -#define WM8915_DSP1RX_UNMUTE_RAMP_WIDTH 1 /* DSP1RX_UNMUTE_RAMP */ - -/* - * R1057 (0x421) - DSP1 RX Filters (2) - */ -#define WM8915_DSP1RX_3D_GAIN_MASK 0x3E00 /* DSP1RX_3D_GAIN - [13:9] */ -#define WM8915_DSP1RX_3D_GAIN_SHIFT 9 /* DSP1RX_3D_GAIN - [13:9] */ -#define WM8915_DSP1RX_3D_GAIN_WIDTH 5 /* DSP1RX_3D_GAIN - [13:9] */ -#define WM8915_DSP1RX_3D_ENA 0x0100 /* DSP1RX_3D_ENA */ -#define WM8915_DSP1RX_3D_ENA_MASK 0x0100 /* DSP1RX_3D_ENA */ -#define WM8915_DSP1RX_3D_ENA_SHIFT 8 /* DSP1RX_3D_ENA */ -#define WM8915_DSP1RX_3D_ENA_WIDTH 1 /* DSP1RX_3D_ENA */ - -/* - * R1088 (0x440) - DSP1 DRC (1) - */ -#define WM8915_DSP1DRC_SIG_DET_RMS_MASK 0xF800 /* DSP1DRC_SIG_DET_RMS - [15:11] */ -#define WM8915_DSP1DRC_SIG_DET_RMS_SHIFT 11 /* DSP1DRC_SIG_DET_RMS - [15:11] */ -#define WM8915_DSP1DRC_SIG_DET_RMS_WIDTH 5 /* DSP1DRC_SIG_DET_RMS - [15:11] */ -#define WM8915_DSP1DRC_SIG_DET_PK_MASK 0x0600 /* DSP1DRC_SIG_DET_PK - [10:9] */ -#define WM8915_DSP1DRC_SIG_DET_PK_SHIFT 9 /* DSP1DRC_SIG_DET_PK - [10:9] */ -#define WM8915_DSP1DRC_SIG_DET_PK_WIDTH 2 /* DSP1DRC_SIG_DET_PK - [10:9] */ -#define WM8915_DSP1DRC_NG_ENA 0x0100 /* DSP1DRC_NG_ENA */ -#define WM8915_DSP1DRC_NG_ENA_MASK 0x0100 /* DSP1DRC_NG_ENA */ -#define WM8915_DSP1DRC_NG_ENA_SHIFT 8 /* DSP1DRC_NG_ENA */ -#define WM8915_DSP1DRC_NG_ENA_WIDTH 1 /* DSP1DRC_NG_ENA */ -#define WM8915_DSP1DRC_SIG_DET_MODE 0x0080 /* DSP1DRC_SIG_DET_MODE */ -#define WM8915_DSP1DRC_SIG_DET_MODE_MASK 0x0080 /* DSP1DRC_SIG_DET_MODE */ -#define WM8915_DSP1DRC_SIG_DET_MODE_SHIFT 7 /* DSP1DRC_SIG_DET_MODE */ -#define WM8915_DSP1DRC_SIG_DET_MODE_WIDTH 1 /* DSP1DRC_SIG_DET_MODE */ -#define WM8915_DSP1DRC_SIG_DET 0x0040 /* DSP1DRC_SIG_DET */ -#define WM8915_DSP1DRC_SIG_DET_MASK 0x0040 /* DSP1DRC_SIG_DET */ -#define WM8915_DSP1DRC_SIG_DET_SHIFT 6 /* DSP1DRC_SIG_DET */ -#define WM8915_DSP1DRC_SIG_DET_WIDTH 1 /* DSP1DRC_SIG_DET */ -#define WM8915_DSP1DRC_KNEE2_OP_ENA 0x0020 /* DSP1DRC_KNEE2_OP_ENA */ -#define WM8915_DSP1DRC_KNEE2_OP_ENA_MASK 0x0020 /* DSP1DRC_KNEE2_OP_ENA */ -#define WM8915_DSP1DRC_KNEE2_OP_ENA_SHIFT 5 /* DSP1DRC_KNEE2_OP_ENA */ -#define WM8915_DSP1DRC_KNEE2_OP_ENA_WIDTH 1 /* DSP1DRC_KNEE2_OP_ENA */ -#define WM8915_DSP1DRC_QR 0x0010 /* DSP1DRC_QR */ -#define WM8915_DSP1DRC_QR_MASK 0x0010 /* DSP1DRC_QR */ -#define WM8915_DSP1DRC_QR_SHIFT 4 /* DSP1DRC_QR */ -#define WM8915_DSP1DRC_QR_WIDTH 1 /* DSP1DRC_QR */ -#define WM8915_DSP1DRC_ANTICLIP 0x0008 /* DSP1DRC_ANTICLIP */ -#define WM8915_DSP1DRC_ANTICLIP_MASK 0x0008 /* DSP1DRC_ANTICLIP */ -#define WM8915_DSP1DRC_ANTICLIP_SHIFT 3 /* DSP1DRC_ANTICLIP */ -#define WM8915_DSP1DRC_ANTICLIP_WIDTH 1 /* DSP1DRC_ANTICLIP */ -#define WM8915_DSP1RX_DRC_ENA 0x0004 /* DSP1RX_DRC_ENA */ -#define WM8915_DSP1RX_DRC_ENA_MASK 0x0004 /* DSP1RX_DRC_ENA */ -#define WM8915_DSP1RX_DRC_ENA_SHIFT 2 /* DSP1RX_DRC_ENA */ -#define WM8915_DSP1RX_DRC_ENA_WIDTH 1 /* DSP1RX_DRC_ENA */ -#define WM8915_DSP1TXL_DRC_ENA 0x0002 /* DSP1TXL_DRC_ENA */ -#define WM8915_DSP1TXL_DRC_ENA_MASK 0x0002 /* DSP1TXL_DRC_ENA */ -#define WM8915_DSP1TXL_DRC_ENA_SHIFT 1 /* DSP1TXL_DRC_ENA */ -#define WM8915_DSP1TXL_DRC_ENA_WIDTH 1 /* DSP1TXL_DRC_ENA */ -#define WM8915_DSP1TXR_DRC_ENA 0x0001 /* DSP1TXR_DRC_ENA */ -#define WM8915_DSP1TXR_DRC_ENA_MASK 0x0001 /* DSP1TXR_DRC_ENA */ -#define WM8915_DSP1TXR_DRC_ENA_SHIFT 0 /* DSP1TXR_DRC_ENA */ -#define WM8915_DSP1TXR_DRC_ENA_WIDTH 1 /* DSP1TXR_DRC_ENA */ - -/* - * R1089 (0x441) - DSP1 DRC (2) - */ -#define WM8915_DSP1DRC_ATK_MASK 0x1E00 /* DSP1DRC_ATK - [12:9] */ -#define WM8915_DSP1DRC_ATK_SHIFT 9 /* DSP1DRC_ATK - [12:9] */ -#define WM8915_DSP1DRC_ATK_WIDTH 4 /* DSP1DRC_ATK - [12:9] */ -#define WM8915_DSP1DRC_DCY_MASK 0x01E0 /* DSP1DRC_DCY - [8:5] */ -#define WM8915_DSP1DRC_DCY_SHIFT 5 /* DSP1DRC_DCY - [8:5] */ -#define WM8915_DSP1DRC_DCY_WIDTH 4 /* DSP1DRC_DCY - [8:5] */ -#define WM8915_DSP1DRC_MINGAIN_MASK 0x001C /* DSP1DRC_MINGAIN - [4:2] */ -#define WM8915_DSP1DRC_MINGAIN_SHIFT 2 /* DSP1DRC_MINGAIN - [4:2] */ -#define WM8915_DSP1DRC_MINGAIN_WIDTH 3 /* DSP1DRC_MINGAIN - [4:2] */ -#define WM8915_DSP1DRC_MAXGAIN_MASK 0x0003 /* DSP1DRC_MAXGAIN - [1:0] */ -#define WM8915_DSP1DRC_MAXGAIN_SHIFT 0 /* DSP1DRC_MAXGAIN - [1:0] */ -#define WM8915_DSP1DRC_MAXGAIN_WIDTH 2 /* DSP1DRC_MAXGAIN - [1:0] */ - -/* - * R1090 (0x442) - DSP1 DRC (3) - */ -#define WM8915_DSP1DRC_NG_MINGAIN_MASK 0xF000 /* DSP1DRC_NG_MINGAIN - [15:12] */ -#define WM8915_DSP1DRC_NG_MINGAIN_SHIFT 12 /* DSP1DRC_NG_MINGAIN - [15:12] */ -#define WM8915_DSP1DRC_NG_MINGAIN_WIDTH 4 /* DSP1DRC_NG_MINGAIN - [15:12] */ -#define WM8915_DSP1DRC_NG_EXP_MASK 0x0C00 /* DSP1DRC_NG_EXP - [11:10] */ -#define WM8915_DSP1DRC_NG_EXP_SHIFT 10 /* DSP1DRC_NG_EXP - [11:10] */ -#define WM8915_DSP1DRC_NG_EXP_WIDTH 2 /* DSP1DRC_NG_EXP - [11:10] */ -#define WM8915_DSP1DRC_QR_THR_MASK 0x0300 /* DSP1DRC_QR_THR - [9:8] */ -#define WM8915_DSP1DRC_QR_THR_SHIFT 8 /* DSP1DRC_QR_THR - [9:8] */ -#define WM8915_DSP1DRC_QR_THR_WIDTH 2 /* DSP1DRC_QR_THR - [9:8] */ -#define WM8915_DSP1DRC_QR_DCY_MASK 0x00C0 /* DSP1DRC_QR_DCY - [7:6] */ -#define WM8915_DSP1DRC_QR_DCY_SHIFT 6 /* DSP1DRC_QR_DCY - [7:6] */ -#define WM8915_DSP1DRC_QR_DCY_WIDTH 2 /* DSP1DRC_QR_DCY - [7:6] */ -#define WM8915_DSP1DRC_HI_COMP_MASK 0x0038 /* DSP1DRC_HI_COMP - [5:3] */ -#define WM8915_DSP1DRC_HI_COMP_SHIFT 3 /* DSP1DRC_HI_COMP - [5:3] */ -#define WM8915_DSP1DRC_HI_COMP_WIDTH 3 /* DSP1DRC_HI_COMP - [5:3] */ -#define WM8915_DSP1DRC_LO_COMP_MASK 0x0007 /* DSP1DRC_LO_COMP - [2:0] */ -#define WM8915_DSP1DRC_LO_COMP_SHIFT 0 /* DSP1DRC_LO_COMP - [2:0] */ -#define WM8915_DSP1DRC_LO_COMP_WIDTH 3 /* DSP1DRC_LO_COMP - [2:0] */ - -/* - * R1091 (0x443) - DSP1 DRC (4) - */ -#define WM8915_DSP1DRC_KNEE_IP_MASK 0x07E0 /* DSP1DRC_KNEE_IP - [10:5] */ -#define WM8915_DSP1DRC_KNEE_IP_SHIFT 5 /* DSP1DRC_KNEE_IP - [10:5] */ -#define WM8915_DSP1DRC_KNEE_IP_WIDTH 6 /* DSP1DRC_KNEE_IP - [10:5] */ -#define WM8915_DSP1DRC_KNEE_OP_MASK 0x001F /* DSP1DRC_KNEE_OP - [4:0] */ -#define WM8915_DSP1DRC_KNEE_OP_SHIFT 0 /* DSP1DRC_KNEE_OP - [4:0] */ -#define WM8915_DSP1DRC_KNEE_OP_WIDTH 5 /* DSP1DRC_KNEE_OP - [4:0] */ - -/* - * R1092 (0x444) - DSP1 DRC (5) - */ -#define WM8915_DSP1DRC_KNEE2_IP_MASK 0x03E0 /* DSP1DRC_KNEE2_IP - [9:5] */ -#define WM8915_DSP1DRC_KNEE2_IP_SHIFT 5 /* DSP1DRC_KNEE2_IP - [9:5] */ -#define WM8915_DSP1DRC_KNEE2_IP_WIDTH 5 /* DSP1DRC_KNEE2_IP - [9:5] */ -#define WM8915_DSP1DRC_KNEE2_OP_MASK 0x001F /* DSP1DRC_KNEE2_OP - [4:0] */ -#define WM8915_DSP1DRC_KNEE2_OP_SHIFT 0 /* DSP1DRC_KNEE2_OP - [4:0] */ -#define WM8915_DSP1DRC_KNEE2_OP_WIDTH 5 /* DSP1DRC_KNEE2_OP - [4:0] */ - -/* - * R1152 (0x480) - DSP1 RX EQ Gains (1) - */ -#define WM8915_DSP1RX_EQ_B1_GAIN_MASK 0xF800 /* DSP1RX_EQ_B1_GAIN - [15:11] */ -#define WM8915_DSP1RX_EQ_B1_GAIN_SHIFT 11 /* DSP1RX_EQ_B1_GAIN - [15:11] */ -#define WM8915_DSP1RX_EQ_B1_GAIN_WIDTH 5 /* DSP1RX_EQ_B1_GAIN - [15:11] */ -#define WM8915_DSP1RX_EQ_B2_GAIN_MASK 0x07C0 /* DSP1RX_EQ_B2_GAIN - [10:6] */ -#define WM8915_DSP1RX_EQ_B2_GAIN_SHIFT 6 /* DSP1RX_EQ_B2_GAIN - [10:6] */ -#define WM8915_DSP1RX_EQ_B2_GAIN_WIDTH 5 /* DSP1RX_EQ_B2_GAIN - [10:6] */ -#define WM8915_DSP1RX_EQ_B3_GAIN_MASK 0x003E /* DSP1RX_EQ_B3_GAIN - [5:1] */ -#define WM8915_DSP1RX_EQ_B3_GAIN_SHIFT 1 /* DSP1RX_EQ_B3_GAIN - [5:1] */ -#define WM8915_DSP1RX_EQ_B3_GAIN_WIDTH 5 /* DSP1RX_EQ_B3_GAIN - [5:1] */ -#define WM8915_DSP1RX_EQ_ENA 0x0001 /* DSP1RX_EQ_ENA */ -#define WM8915_DSP1RX_EQ_ENA_MASK 0x0001 /* DSP1RX_EQ_ENA */ -#define WM8915_DSP1RX_EQ_ENA_SHIFT 0 /* DSP1RX_EQ_ENA */ -#define WM8915_DSP1RX_EQ_ENA_WIDTH 1 /* DSP1RX_EQ_ENA */ - -/* - * R1153 (0x481) - DSP1 RX EQ Gains (2) - */ -#define WM8915_DSP1RX_EQ_B4_GAIN_MASK 0xF800 /* DSP1RX_EQ_B4_GAIN - [15:11] */ -#define WM8915_DSP1RX_EQ_B4_GAIN_SHIFT 11 /* DSP1RX_EQ_B4_GAIN - [15:11] */ -#define WM8915_DSP1RX_EQ_B4_GAIN_WIDTH 5 /* DSP1RX_EQ_B4_GAIN - [15:11] */ -#define WM8915_DSP1RX_EQ_B5_GAIN_MASK 0x07C0 /* DSP1RX_EQ_B5_GAIN - [10:6] */ -#define WM8915_DSP1RX_EQ_B5_GAIN_SHIFT 6 /* DSP1RX_EQ_B5_GAIN - [10:6] */ -#define WM8915_DSP1RX_EQ_B5_GAIN_WIDTH 5 /* DSP1RX_EQ_B5_GAIN - [10:6] */ - -/* - * R1154 (0x482) - DSP1 RX EQ Band 1 A - */ -#define WM8915_DSP1RX_EQ_B1_A_MASK 0xFFFF /* DSP1RX_EQ_B1_A - [15:0] */ -#define WM8915_DSP1RX_EQ_B1_A_SHIFT 0 /* DSP1RX_EQ_B1_A - [15:0] */ -#define WM8915_DSP1RX_EQ_B1_A_WIDTH 16 /* DSP1RX_EQ_B1_A - [15:0] */ - -/* - * R1155 (0x483) - DSP1 RX EQ Band 1 B - */ -#define WM8915_DSP1RX_EQ_B1_B_MASK 0xFFFF /* DSP1RX_EQ_B1_B - [15:0] */ -#define WM8915_DSP1RX_EQ_B1_B_SHIFT 0 /* DSP1RX_EQ_B1_B - [15:0] */ -#define WM8915_DSP1RX_EQ_B1_B_WIDTH 16 /* DSP1RX_EQ_B1_B - [15:0] */ - -/* - * R1156 (0x484) - DSP1 RX EQ Band 1 PG - */ -#define WM8915_DSP1RX_EQ_B1_PG_MASK 0xFFFF /* DSP1RX_EQ_B1_PG - [15:0] */ -#define WM8915_DSP1RX_EQ_B1_PG_SHIFT 0 /* DSP1RX_EQ_B1_PG - [15:0] */ -#define WM8915_DSP1RX_EQ_B1_PG_WIDTH 16 /* DSP1RX_EQ_B1_PG - [15:0] */ - -/* - * R1157 (0x485) - DSP1 RX EQ Band 2 A - */ -#define WM8915_DSP1RX_EQ_B2_A_MASK 0xFFFF /* DSP1RX_EQ_B2_A - [15:0] */ -#define WM8915_DSP1RX_EQ_B2_A_SHIFT 0 /* DSP1RX_EQ_B2_A - [15:0] */ -#define WM8915_DSP1RX_EQ_B2_A_WIDTH 16 /* DSP1RX_EQ_B2_A - [15:0] */ - -/* - * R1158 (0x486) - DSP1 RX EQ Band 2 B - */ -#define WM8915_DSP1RX_EQ_B2_B_MASK 0xFFFF /* DSP1RX_EQ_B2_B - [15:0] */ -#define WM8915_DSP1RX_EQ_B2_B_SHIFT 0 /* DSP1RX_EQ_B2_B - [15:0] */ -#define WM8915_DSP1RX_EQ_B2_B_WIDTH 16 /* DSP1RX_EQ_B2_B - [15:0] */ - -/* - * R1159 (0x487) - DSP1 RX EQ Band 2 C - */ -#define WM8915_DSP1RX_EQ_B2_C_MASK 0xFFFF /* DSP1RX_EQ_B2_C - [15:0] */ -#define WM8915_DSP1RX_EQ_B2_C_SHIFT 0 /* DSP1RX_EQ_B2_C - [15:0] */ -#define WM8915_DSP1RX_EQ_B2_C_WIDTH 16 /* DSP1RX_EQ_B2_C - [15:0] */ - -/* - * R1160 (0x488) - DSP1 RX EQ Band 2 PG - */ -#define WM8915_DSP1RX_EQ_B2_PG_MASK 0xFFFF /* DSP1RX_EQ_B2_PG - [15:0] */ -#define WM8915_DSP1RX_EQ_B2_PG_SHIFT 0 /* DSP1RX_EQ_B2_PG - [15:0] */ -#define WM8915_DSP1RX_EQ_B2_PG_WIDTH 16 /* DSP1RX_EQ_B2_PG - [15:0] */ - -/* - * R1161 (0x489) - DSP1 RX EQ Band 3 A - */ -#define WM8915_DSP1RX_EQ_B3_A_MASK 0xFFFF /* DSP1RX_EQ_B3_A - [15:0] */ -#define WM8915_DSP1RX_EQ_B3_A_SHIFT 0 /* DSP1RX_EQ_B3_A - [15:0] */ -#define WM8915_DSP1RX_EQ_B3_A_WIDTH 16 /* DSP1RX_EQ_B3_A - [15:0] */ - -/* - * R1162 (0x48A) - DSP1 RX EQ Band 3 B - */ -#define WM8915_DSP1RX_EQ_B3_B_MASK 0xFFFF /* DSP1RX_EQ_B3_B - [15:0] */ -#define WM8915_DSP1RX_EQ_B3_B_SHIFT 0 /* DSP1RX_EQ_B3_B - [15:0] */ -#define WM8915_DSP1RX_EQ_B3_B_WIDTH 16 /* DSP1RX_EQ_B3_B - [15:0] */ - -/* - * R1163 (0x48B) - DSP1 RX EQ Band 3 C - */ -#define WM8915_DSP1RX_EQ_B3_C_MASK 0xFFFF /* DSP1RX_EQ_B3_C - [15:0] */ -#define WM8915_DSP1RX_EQ_B3_C_SHIFT 0 /* DSP1RX_EQ_B3_C - [15:0] */ -#define WM8915_DSP1RX_EQ_B3_C_WIDTH 16 /* DSP1RX_EQ_B3_C - [15:0] */ - -/* - * R1164 (0x48C) - DSP1 RX EQ Band 3 PG - */ -#define WM8915_DSP1RX_EQ_B3_PG_MASK 0xFFFF /* DSP1RX_EQ_B3_PG - [15:0] */ -#define WM8915_DSP1RX_EQ_B3_PG_SHIFT 0 /* DSP1RX_EQ_B3_PG - [15:0] */ -#define WM8915_DSP1RX_EQ_B3_PG_WIDTH 16 /* DSP1RX_EQ_B3_PG - [15:0] */ - -/* - * R1165 (0x48D) - DSP1 RX EQ Band 4 A - */ -#define WM8915_DSP1RX_EQ_B4_A_MASK 0xFFFF /* DSP1RX_EQ_B4_A - [15:0] */ -#define WM8915_DSP1RX_EQ_B4_A_SHIFT 0 /* DSP1RX_EQ_B4_A - [15:0] */ -#define WM8915_DSP1RX_EQ_B4_A_WIDTH 16 /* DSP1RX_EQ_B4_A - [15:0] */ - -/* - * R1166 (0x48E) - DSP1 RX EQ Band 4 B - */ -#define WM8915_DSP1RX_EQ_B4_B_MASK 0xFFFF /* DSP1RX_EQ_B4_B - [15:0] */ -#define WM8915_DSP1RX_EQ_B4_B_SHIFT 0 /* DSP1RX_EQ_B4_B - [15:0] */ -#define WM8915_DSP1RX_EQ_B4_B_WIDTH 16 /* DSP1RX_EQ_B4_B - [15:0] */ - -/* - * R1167 (0x48F) - DSP1 RX EQ Band 4 C - */ -#define WM8915_DSP1RX_EQ_B4_C_MASK 0xFFFF /* DSP1RX_EQ_B4_C - [15:0] */ -#define WM8915_DSP1RX_EQ_B4_C_SHIFT 0 /* DSP1RX_EQ_B4_C - [15:0] */ -#define WM8915_DSP1RX_EQ_B4_C_WIDTH 16 /* DSP1RX_EQ_B4_C - [15:0] */ - -/* - * R1168 (0x490) - DSP1 RX EQ Band 4 PG - */ -#define WM8915_DSP1RX_EQ_B4_PG_MASK 0xFFFF /* DSP1RX_EQ_B4_PG - [15:0] */ -#define WM8915_DSP1RX_EQ_B4_PG_SHIFT 0 /* DSP1RX_EQ_B4_PG - [15:0] */ -#define WM8915_DSP1RX_EQ_B4_PG_WIDTH 16 /* DSP1RX_EQ_B4_PG - [15:0] */ - -/* - * R1169 (0x491) - DSP1 RX EQ Band 5 A - */ -#define WM8915_DSP1RX_EQ_B5_A_MASK 0xFFFF /* DSP1RX_EQ_B5_A - [15:0] */ -#define WM8915_DSP1RX_EQ_B5_A_SHIFT 0 /* DSP1RX_EQ_B5_A - [15:0] */ -#define WM8915_DSP1RX_EQ_B5_A_WIDTH 16 /* DSP1RX_EQ_B5_A - [15:0] */ - -/* - * R1170 (0x492) - DSP1 RX EQ Band 5 B - */ -#define WM8915_DSP1RX_EQ_B5_B_MASK 0xFFFF /* DSP1RX_EQ_B5_B - [15:0] */ -#define WM8915_DSP1RX_EQ_B5_B_SHIFT 0 /* DSP1RX_EQ_B5_B - [15:0] */ -#define WM8915_DSP1RX_EQ_B5_B_WIDTH 16 /* DSP1RX_EQ_B5_B - [15:0] */ - -/* - * R1171 (0x493) - DSP1 RX EQ Band 5 PG - */ -#define WM8915_DSP1RX_EQ_B5_PG_MASK 0xFFFF /* DSP1RX_EQ_B5_PG - [15:0] */ -#define WM8915_DSP1RX_EQ_B5_PG_SHIFT 0 /* DSP1RX_EQ_B5_PG - [15:0] */ -#define WM8915_DSP1RX_EQ_B5_PG_WIDTH 16 /* DSP1RX_EQ_B5_PG - [15:0] */ - -/* - * R1280 (0x500) - DSP2 TX Left Volume - */ -#define WM8915_DSP2TX_VU 0x0100 /* DSP2TX_VU */ -#define WM8915_DSP2TX_VU_MASK 0x0100 /* DSP2TX_VU */ -#define WM8915_DSP2TX_VU_SHIFT 8 /* DSP2TX_VU */ -#define WM8915_DSP2TX_VU_WIDTH 1 /* DSP2TX_VU */ -#define WM8915_DSP2TXL_VOL_MASK 0x00FF /* DSP2TXL_VOL - [7:0] */ -#define WM8915_DSP2TXL_VOL_SHIFT 0 /* DSP2TXL_VOL - [7:0] */ -#define WM8915_DSP2TXL_VOL_WIDTH 8 /* DSP2TXL_VOL - [7:0] */ - -/* - * R1281 (0x501) - DSP2 TX Right Volume - */ -#define WM8915_DSP2TX_VU 0x0100 /* DSP2TX_VU */ -#define WM8915_DSP2TX_VU_MASK 0x0100 /* DSP2TX_VU */ -#define WM8915_DSP2TX_VU_SHIFT 8 /* DSP2TX_VU */ -#define WM8915_DSP2TX_VU_WIDTH 1 /* DSP2TX_VU */ -#define WM8915_DSP2TXR_VOL_MASK 0x00FF /* DSP2TXR_VOL - [7:0] */ -#define WM8915_DSP2TXR_VOL_SHIFT 0 /* DSP2TXR_VOL - [7:0] */ -#define WM8915_DSP2TXR_VOL_WIDTH 8 /* DSP2TXR_VOL - [7:0] */ - -/* - * R1282 (0x502) - DSP2 RX Left Volume - */ -#define WM8915_DSP2RX_VU 0x0100 /* DSP2RX_VU */ -#define WM8915_DSP2RX_VU_MASK 0x0100 /* DSP2RX_VU */ -#define WM8915_DSP2RX_VU_SHIFT 8 /* DSP2RX_VU */ -#define WM8915_DSP2RX_VU_WIDTH 1 /* DSP2RX_VU */ -#define WM8915_DSP2RXL_VOL_MASK 0x00FF /* DSP2RXL_VOL - [7:0] */ -#define WM8915_DSP2RXL_VOL_SHIFT 0 /* DSP2RXL_VOL - [7:0] */ -#define WM8915_DSP2RXL_VOL_WIDTH 8 /* DSP2RXL_VOL - [7:0] */ - -/* - * R1283 (0x503) - DSP2 RX Right Volume - */ -#define WM8915_DSP2RX_VU 0x0100 /* DSP2RX_VU */ -#define WM8915_DSP2RX_VU_MASK 0x0100 /* DSP2RX_VU */ -#define WM8915_DSP2RX_VU_SHIFT 8 /* DSP2RX_VU */ -#define WM8915_DSP2RX_VU_WIDTH 1 /* DSP2RX_VU */ -#define WM8915_DSP2RXR_VOL_MASK 0x00FF /* DSP2RXR_VOL - [7:0] */ -#define WM8915_DSP2RXR_VOL_SHIFT 0 /* DSP2RXR_VOL - [7:0] */ -#define WM8915_DSP2RXR_VOL_WIDTH 8 /* DSP2RXR_VOL - [7:0] */ - -/* - * R1296 (0x510) - DSP2 TX Filters - */ -#define WM8915_DSP2TX_NF 0x2000 /* DSP2TX_NF */ -#define WM8915_DSP2TX_NF_MASK 0x2000 /* DSP2TX_NF */ -#define WM8915_DSP2TX_NF_SHIFT 13 /* DSP2TX_NF */ -#define WM8915_DSP2TX_NF_WIDTH 1 /* DSP2TX_NF */ -#define WM8915_DSP2TXL_HPF 0x1000 /* DSP2TXL_HPF */ -#define WM8915_DSP2TXL_HPF_MASK 0x1000 /* DSP2TXL_HPF */ -#define WM8915_DSP2TXL_HPF_SHIFT 12 /* DSP2TXL_HPF */ -#define WM8915_DSP2TXL_HPF_WIDTH 1 /* DSP2TXL_HPF */ -#define WM8915_DSP2TXR_HPF 0x0800 /* DSP2TXR_HPF */ -#define WM8915_DSP2TXR_HPF_MASK 0x0800 /* DSP2TXR_HPF */ -#define WM8915_DSP2TXR_HPF_SHIFT 11 /* DSP2TXR_HPF */ -#define WM8915_DSP2TXR_HPF_WIDTH 1 /* DSP2TXR_HPF */ -#define WM8915_DSP2TX_HPF_MODE_MASK 0x0018 /* DSP2TX_HPF_MODE - [4:3] */ -#define WM8915_DSP2TX_HPF_MODE_SHIFT 3 /* DSP2TX_HPF_MODE - [4:3] */ -#define WM8915_DSP2TX_HPF_MODE_WIDTH 2 /* DSP2TX_HPF_MODE - [4:3] */ -#define WM8915_DSP2TX_HPF_CUT_MASK 0x0007 /* DSP2TX_HPF_CUT - [2:0] */ -#define WM8915_DSP2TX_HPF_CUT_SHIFT 0 /* DSP2TX_HPF_CUT - [2:0] */ -#define WM8915_DSP2TX_HPF_CUT_WIDTH 3 /* DSP2TX_HPF_CUT - [2:0] */ - -/* - * R1312 (0x520) - DSP2 RX Filters (1) - */ -#define WM8915_DSP2RX_MUTE 0x0200 /* DSP2RX_MUTE */ -#define WM8915_DSP2RX_MUTE_MASK 0x0200 /* DSP2RX_MUTE */ -#define WM8915_DSP2RX_MUTE_SHIFT 9 /* DSP2RX_MUTE */ -#define WM8915_DSP2RX_MUTE_WIDTH 1 /* DSP2RX_MUTE */ -#define WM8915_DSP2RX_MONO 0x0080 /* DSP2RX_MONO */ -#define WM8915_DSP2RX_MONO_MASK 0x0080 /* DSP2RX_MONO */ -#define WM8915_DSP2RX_MONO_SHIFT 7 /* DSP2RX_MONO */ -#define WM8915_DSP2RX_MONO_WIDTH 1 /* DSP2RX_MONO */ -#define WM8915_DSP2RX_MUTERATE 0x0020 /* DSP2RX_MUTERATE */ -#define WM8915_DSP2RX_MUTERATE_MASK 0x0020 /* DSP2RX_MUTERATE */ -#define WM8915_DSP2RX_MUTERATE_SHIFT 5 /* DSP2RX_MUTERATE */ -#define WM8915_DSP2RX_MUTERATE_WIDTH 1 /* DSP2RX_MUTERATE */ -#define WM8915_DSP2RX_UNMUTE_RAMP 0x0010 /* DSP2RX_UNMUTE_RAMP */ -#define WM8915_DSP2RX_UNMUTE_RAMP_MASK 0x0010 /* DSP2RX_UNMUTE_RAMP */ -#define WM8915_DSP2RX_UNMUTE_RAMP_SHIFT 4 /* DSP2RX_UNMUTE_RAMP */ -#define WM8915_DSP2RX_UNMUTE_RAMP_WIDTH 1 /* DSP2RX_UNMUTE_RAMP */ - -/* - * R1313 (0x521) - DSP2 RX Filters (2) - */ -#define WM8915_DSP2RX_3D_GAIN_MASK 0x3E00 /* DSP2RX_3D_GAIN - [13:9] */ -#define WM8915_DSP2RX_3D_GAIN_SHIFT 9 /* DSP2RX_3D_GAIN - [13:9] */ -#define WM8915_DSP2RX_3D_GAIN_WIDTH 5 /* DSP2RX_3D_GAIN - [13:9] */ -#define WM8915_DSP2RX_3D_ENA 0x0100 /* DSP2RX_3D_ENA */ -#define WM8915_DSP2RX_3D_ENA_MASK 0x0100 /* DSP2RX_3D_ENA */ -#define WM8915_DSP2RX_3D_ENA_SHIFT 8 /* DSP2RX_3D_ENA */ -#define WM8915_DSP2RX_3D_ENA_WIDTH 1 /* DSP2RX_3D_ENA */ - -/* - * R1344 (0x540) - DSP2 DRC (1) - */ -#define WM8915_DSP2DRC_SIG_DET_RMS_MASK 0xF800 /* DSP2DRC_SIG_DET_RMS - [15:11] */ -#define WM8915_DSP2DRC_SIG_DET_RMS_SHIFT 11 /* DSP2DRC_SIG_DET_RMS - [15:11] */ -#define WM8915_DSP2DRC_SIG_DET_RMS_WIDTH 5 /* DSP2DRC_SIG_DET_RMS - [15:11] */ -#define WM8915_DSP2DRC_SIG_DET_PK_MASK 0x0600 /* DSP2DRC_SIG_DET_PK - [10:9] */ -#define WM8915_DSP2DRC_SIG_DET_PK_SHIFT 9 /* DSP2DRC_SIG_DET_PK - [10:9] */ -#define WM8915_DSP2DRC_SIG_DET_PK_WIDTH 2 /* DSP2DRC_SIG_DET_PK - [10:9] */ -#define WM8915_DSP2DRC_NG_ENA 0x0100 /* DSP2DRC_NG_ENA */ -#define WM8915_DSP2DRC_NG_ENA_MASK 0x0100 /* DSP2DRC_NG_ENA */ -#define WM8915_DSP2DRC_NG_ENA_SHIFT 8 /* DSP2DRC_NG_ENA */ -#define WM8915_DSP2DRC_NG_ENA_WIDTH 1 /* DSP2DRC_NG_ENA */ -#define WM8915_DSP2DRC_SIG_DET_MODE 0x0080 /* DSP2DRC_SIG_DET_MODE */ -#define WM8915_DSP2DRC_SIG_DET_MODE_MASK 0x0080 /* DSP2DRC_SIG_DET_MODE */ -#define WM8915_DSP2DRC_SIG_DET_MODE_SHIFT 7 /* DSP2DRC_SIG_DET_MODE */ -#define WM8915_DSP2DRC_SIG_DET_MODE_WIDTH 1 /* DSP2DRC_SIG_DET_MODE */ -#define WM8915_DSP2DRC_SIG_DET 0x0040 /* DSP2DRC_SIG_DET */ -#define WM8915_DSP2DRC_SIG_DET_MASK 0x0040 /* DSP2DRC_SIG_DET */ -#define WM8915_DSP2DRC_SIG_DET_SHIFT 6 /* DSP2DRC_SIG_DET */ -#define WM8915_DSP2DRC_SIG_DET_WIDTH 1 /* DSP2DRC_SIG_DET */ -#define WM8915_DSP2DRC_KNEE2_OP_ENA 0x0020 /* DSP2DRC_KNEE2_OP_ENA */ -#define WM8915_DSP2DRC_KNEE2_OP_ENA_MASK 0x0020 /* DSP2DRC_KNEE2_OP_ENA */ -#define WM8915_DSP2DRC_KNEE2_OP_ENA_SHIFT 5 /* DSP2DRC_KNEE2_OP_ENA */ -#define WM8915_DSP2DRC_KNEE2_OP_ENA_WIDTH 1 /* DSP2DRC_KNEE2_OP_ENA */ -#define WM8915_DSP2DRC_QR 0x0010 /* DSP2DRC_QR */ -#define WM8915_DSP2DRC_QR_MASK 0x0010 /* DSP2DRC_QR */ -#define WM8915_DSP2DRC_QR_SHIFT 4 /* DSP2DRC_QR */ -#define WM8915_DSP2DRC_QR_WIDTH 1 /* DSP2DRC_QR */ -#define WM8915_DSP2DRC_ANTICLIP 0x0008 /* DSP2DRC_ANTICLIP */ -#define WM8915_DSP2DRC_ANTICLIP_MASK 0x0008 /* DSP2DRC_ANTICLIP */ -#define WM8915_DSP2DRC_ANTICLIP_SHIFT 3 /* DSP2DRC_ANTICLIP */ -#define WM8915_DSP2DRC_ANTICLIP_WIDTH 1 /* DSP2DRC_ANTICLIP */ -#define WM8915_DSP2RX_DRC_ENA 0x0004 /* DSP2RX_DRC_ENA */ -#define WM8915_DSP2RX_DRC_ENA_MASK 0x0004 /* DSP2RX_DRC_ENA */ -#define WM8915_DSP2RX_DRC_ENA_SHIFT 2 /* DSP2RX_DRC_ENA */ -#define WM8915_DSP2RX_DRC_ENA_WIDTH 1 /* DSP2RX_DRC_ENA */ -#define WM8915_DSP2TXL_DRC_ENA 0x0002 /* DSP2TXL_DRC_ENA */ -#define WM8915_DSP2TXL_DRC_ENA_MASK 0x0002 /* DSP2TXL_DRC_ENA */ -#define WM8915_DSP2TXL_DRC_ENA_SHIFT 1 /* DSP2TXL_DRC_ENA */ -#define WM8915_DSP2TXL_DRC_ENA_WIDTH 1 /* DSP2TXL_DRC_ENA */ -#define WM8915_DSP2TXR_DRC_ENA 0x0001 /* DSP2TXR_DRC_ENA */ -#define WM8915_DSP2TXR_DRC_ENA_MASK 0x0001 /* DSP2TXR_DRC_ENA */ -#define WM8915_DSP2TXR_DRC_ENA_SHIFT 0 /* DSP2TXR_DRC_ENA */ -#define WM8915_DSP2TXR_DRC_ENA_WIDTH 1 /* DSP2TXR_DRC_ENA */ - -/* - * R1345 (0x541) - DSP2 DRC (2) - */ -#define WM8915_DSP2DRC_ATK_MASK 0x1E00 /* DSP2DRC_ATK - [12:9] */ -#define WM8915_DSP2DRC_ATK_SHIFT 9 /* DSP2DRC_ATK - [12:9] */ -#define WM8915_DSP2DRC_ATK_WIDTH 4 /* DSP2DRC_ATK - [12:9] */ -#define WM8915_DSP2DRC_DCY_MASK 0x01E0 /* DSP2DRC_DCY - [8:5] */ -#define WM8915_DSP2DRC_DCY_SHIFT 5 /* DSP2DRC_DCY - [8:5] */ -#define WM8915_DSP2DRC_DCY_WIDTH 4 /* DSP2DRC_DCY - [8:5] */ -#define WM8915_DSP2DRC_MINGAIN_MASK 0x001C /* DSP2DRC_MINGAIN - [4:2] */ -#define WM8915_DSP2DRC_MINGAIN_SHIFT 2 /* DSP2DRC_MINGAIN - [4:2] */ -#define WM8915_DSP2DRC_MINGAIN_WIDTH 3 /* DSP2DRC_MINGAIN - [4:2] */ -#define WM8915_DSP2DRC_MAXGAIN_MASK 0x0003 /* DSP2DRC_MAXGAIN - [1:0] */ -#define WM8915_DSP2DRC_MAXGAIN_SHIFT 0 /* DSP2DRC_MAXGAIN - [1:0] */ -#define WM8915_DSP2DRC_MAXGAIN_WIDTH 2 /* DSP2DRC_MAXGAIN - [1:0] */ - -/* - * R1346 (0x542) - DSP2 DRC (3) - */ -#define WM8915_DSP2DRC_NG_MINGAIN_MASK 0xF000 /* DSP2DRC_NG_MINGAIN - [15:12] */ -#define WM8915_DSP2DRC_NG_MINGAIN_SHIFT 12 /* DSP2DRC_NG_MINGAIN - [15:12] */ -#define WM8915_DSP2DRC_NG_MINGAIN_WIDTH 4 /* DSP2DRC_NG_MINGAIN - [15:12] */ -#define WM8915_DSP2DRC_NG_EXP_MASK 0x0C00 /* DSP2DRC_NG_EXP - [11:10] */ -#define WM8915_DSP2DRC_NG_EXP_SHIFT 10 /* DSP2DRC_NG_EXP - [11:10] */ -#define WM8915_DSP2DRC_NG_EXP_WIDTH 2 /* DSP2DRC_NG_EXP - [11:10] */ -#define WM8915_DSP2DRC_QR_THR_MASK 0x0300 /* DSP2DRC_QR_THR - [9:8] */ -#define WM8915_DSP2DRC_QR_THR_SHIFT 8 /* DSP2DRC_QR_THR - [9:8] */ -#define WM8915_DSP2DRC_QR_THR_WIDTH 2 /* DSP2DRC_QR_THR - [9:8] */ -#define WM8915_DSP2DRC_QR_DCY_MASK 0x00C0 /* DSP2DRC_QR_DCY - [7:6] */ -#define WM8915_DSP2DRC_QR_DCY_SHIFT 6 /* DSP2DRC_QR_DCY - [7:6] */ -#define WM8915_DSP2DRC_QR_DCY_WIDTH 2 /* DSP2DRC_QR_DCY - [7:6] */ -#define WM8915_DSP2DRC_HI_COMP_MASK 0x0038 /* DSP2DRC_HI_COMP - [5:3] */ -#define WM8915_DSP2DRC_HI_COMP_SHIFT 3 /* DSP2DRC_HI_COMP - [5:3] */ -#define WM8915_DSP2DRC_HI_COMP_WIDTH 3 /* DSP2DRC_HI_COMP - [5:3] */ -#define WM8915_DSP2DRC_LO_COMP_MASK 0x0007 /* DSP2DRC_LO_COMP - [2:0] */ -#define WM8915_DSP2DRC_LO_COMP_SHIFT 0 /* DSP2DRC_LO_COMP - [2:0] */ -#define WM8915_DSP2DRC_LO_COMP_WIDTH 3 /* DSP2DRC_LO_COMP - [2:0] */ - -/* - * R1347 (0x543) - DSP2 DRC (4) - */ -#define WM8915_DSP2DRC_KNEE_IP_MASK 0x07E0 /* DSP2DRC_KNEE_IP - [10:5] */ -#define WM8915_DSP2DRC_KNEE_IP_SHIFT 5 /* DSP2DRC_KNEE_IP - [10:5] */ -#define WM8915_DSP2DRC_KNEE_IP_WIDTH 6 /* DSP2DRC_KNEE_IP - [10:5] */ -#define WM8915_DSP2DRC_KNEE_OP_MASK 0x001F /* DSP2DRC_KNEE_OP - [4:0] */ -#define WM8915_DSP2DRC_KNEE_OP_SHIFT 0 /* DSP2DRC_KNEE_OP - [4:0] */ -#define WM8915_DSP2DRC_KNEE_OP_WIDTH 5 /* DSP2DRC_KNEE_OP - [4:0] */ - -/* - * R1348 (0x544) - DSP2 DRC (5) - */ -#define WM8915_DSP2DRC_KNEE2_IP_MASK 0x03E0 /* DSP2DRC_KNEE2_IP - [9:5] */ -#define WM8915_DSP2DRC_KNEE2_IP_SHIFT 5 /* DSP2DRC_KNEE2_IP - [9:5] */ -#define WM8915_DSP2DRC_KNEE2_IP_WIDTH 5 /* DSP2DRC_KNEE2_IP - [9:5] */ -#define WM8915_DSP2DRC_KNEE2_OP_MASK 0x001F /* DSP2DRC_KNEE2_OP - [4:0] */ -#define WM8915_DSP2DRC_KNEE2_OP_SHIFT 0 /* DSP2DRC_KNEE2_OP - [4:0] */ -#define WM8915_DSP2DRC_KNEE2_OP_WIDTH 5 /* DSP2DRC_KNEE2_OP - [4:0] */ - -/* - * R1408 (0x580) - DSP2 RX EQ Gains (1) - */ -#define WM8915_DSP2RX_EQ_B1_GAIN_MASK 0xF800 /* DSP2RX_EQ_B1_GAIN - [15:11] */ -#define WM8915_DSP2RX_EQ_B1_GAIN_SHIFT 11 /* DSP2RX_EQ_B1_GAIN - [15:11] */ -#define WM8915_DSP2RX_EQ_B1_GAIN_WIDTH 5 /* DSP2RX_EQ_B1_GAIN - [15:11] */ -#define WM8915_DSP2RX_EQ_B2_GAIN_MASK 0x07C0 /* DSP2RX_EQ_B2_GAIN - [10:6] */ -#define WM8915_DSP2RX_EQ_B2_GAIN_SHIFT 6 /* DSP2RX_EQ_B2_GAIN - [10:6] */ -#define WM8915_DSP2RX_EQ_B2_GAIN_WIDTH 5 /* DSP2RX_EQ_B2_GAIN - [10:6] */ -#define WM8915_DSP2RX_EQ_B3_GAIN_MASK 0x003E /* DSP2RX_EQ_B3_GAIN - [5:1] */ -#define WM8915_DSP2RX_EQ_B3_GAIN_SHIFT 1 /* DSP2RX_EQ_B3_GAIN - [5:1] */ -#define WM8915_DSP2RX_EQ_B3_GAIN_WIDTH 5 /* DSP2RX_EQ_B3_GAIN - [5:1] */ -#define WM8915_DSP2RX_EQ_ENA 0x0001 /* DSP2RX_EQ_ENA */ -#define WM8915_DSP2RX_EQ_ENA_MASK 0x0001 /* DSP2RX_EQ_ENA */ -#define WM8915_DSP2RX_EQ_ENA_SHIFT 0 /* DSP2RX_EQ_ENA */ -#define WM8915_DSP2RX_EQ_ENA_WIDTH 1 /* DSP2RX_EQ_ENA */ - -/* - * R1409 (0x581) - DSP2 RX EQ Gains (2) - */ -#define WM8915_DSP2RX_EQ_B4_GAIN_MASK 0xF800 /* DSP2RX_EQ_B4_GAIN - [15:11] */ -#define WM8915_DSP2RX_EQ_B4_GAIN_SHIFT 11 /* DSP2RX_EQ_B4_GAIN - [15:11] */ -#define WM8915_DSP2RX_EQ_B4_GAIN_WIDTH 5 /* DSP2RX_EQ_B4_GAIN - [15:11] */ -#define WM8915_DSP2RX_EQ_B5_GAIN_MASK 0x07C0 /* DSP2RX_EQ_B5_GAIN - [10:6] */ -#define WM8915_DSP2RX_EQ_B5_GAIN_SHIFT 6 /* DSP2RX_EQ_B5_GAIN - [10:6] */ -#define WM8915_DSP2RX_EQ_B5_GAIN_WIDTH 5 /* DSP2RX_EQ_B5_GAIN - [10:6] */ - -/* - * R1410 (0x582) - DSP2 RX EQ Band 1 A - */ -#define WM8915_DSP2RX_EQ_B1_A_MASK 0xFFFF /* DSP2RX_EQ_B1_A - [15:0] */ -#define WM8915_DSP2RX_EQ_B1_A_SHIFT 0 /* DSP2RX_EQ_B1_A - [15:0] */ -#define WM8915_DSP2RX_EQ_B1_A_WIDTH 16 /* DSP2RX_EQ_B1_A - [15:0] */ - -/* - * R1411 (0x583) - DSP2 RX EQ Band 1 B - */ -#define WM8915_DSP2RX_EQ_B1_B_MASK 0xFFFF /* DSP2RX_EQ_B1_B - [15:0] */ -#define WM8915_DSP2RX_EQ_B1_B_SHIFT 0 /* DSP2RX_EQ_B1_B - [15:0] */ -#define WM8915_DSP2RX_EQ_B1_B_WIDTH 16 /* DSP2RX_EQ_B1_B - [15:0] */ - -/* - * R1412 (0x584) - DSP2 RX EQ Band 1 PG - */ -#define WM8915_DSP2RX_EQ_B1_PG_MASK 0xFFFF /* DSP2RX_EQ_B1_PG - [15:0] */ -#define WM8915_DSP2RX_EQ_B1_PG_SHIFT 0 /* DSP2RX_EQ_B1_PG - [15:0] */ -#define WM8915_DSP2RX_EQ_B1_PG_WIDTH 16 /* DSP2RX_EQ_B1_PG - [15:0] */ - -/* - * R1413 (0x585) - DSP2 RX EQ Band 2 A - */ -#define WM8915_DSP2RX_EQ_B2_A_MASK 0xFFFF /* DSP2RX_EQ_B2_A - [15:0] */ -#define WM8915_DSP2RX_EQ_B2_A_SHIFT 0 /* DSP2RX_EQ_B2_A - [15:0] */ -#define WM8915_DSP2RX_EQ_B2_A_WIDTH 16 /* DSP2RX_EQ_B2_A - [15:0] */ - -/* - * R1414 (0x586) - DSP2 RX EQ Band 2 B - */ -#define WM8915_DSP2RX_EQ_B2_B_MASK 0xFFFF /* DSP2RX_EQ_B2_B - [15:0] */ -#define WM8915_DSP2RX_EQ_B2_B_SHIFT 0 /* DSP2RX_EQ_B2_B - [15:0] */ -#define WM8915_DSP2RX_EQ_B2_B_WIDTH 16 /* DSP2RX_EQ_B2_B - [15:0] */ - -/* - * R1415 (0x587) - DSP2 RX EQ Band 2 C - */ -#define WM8915_DSP2RX_EQ_B2_C_MASK 0xFFFF /* DSP2RX_EQ_B2_C - [15:0] */ -#define WM8915_DSP2RX_EQ_B2_C_SHIFT 0 /* DSP2RX_EQ_B2_C - [15:0] */ -#define WM8915_DSP2RX_EQ_B2_C_WIDTH 16 /* DSP2RX_EQ_B2_C - [15:0] */ - -/* - * R1416 (0x588) - DSP2 RX EQ Band 2 PG - */ -#define WM8915_DSP2RX_EQ_B2_PG_MASK 0xFFFF /* DSP2RX_EQ_B2_PG - [15:0] */ -#define WM8915_DSP2RX_EQ_B2_PG_SHIFT 0 /* DSP2RX_EQ_B2_PG - [15:0] */ -#define WM8915_DSP2RX_EQ_B2_PG_WIDTH 16 /* DSP2RX_EQ_B2_PG - [15:0] */ - -/* - * R1417 (0x589) - DSP2 RX EQ Band 3 A - */ -#define WM8915_DSP2RX_EQ_B3_A_MASK 0xFFFF /* DSP2RX_EQ_B3_A - [15:0] */ -#define WM8915_DSP2RX_EQ_B3_A_SHIFT 0 /* DSP2RX_EQ_B3_A - [15:0] */ -#define WM8915_DSP2RX_EQ_B3_A_WIDTH 16 /* DSP2RX_EQ_B3_A - [15:0] */ - -/* - * R1418 (0x58A) - DSP2 RX EQ Band 3 B - */ -#define WM8915_DSP2RX_EQ_B3_B_MASK 0xFFFF /* DSP2RX_EQ_B3_B - [15:0] */ -#define WM8915_DSP2RX_EQ_B3_B_SHIFT 0 /* DSP2RX_EQ_B3_B - [15:0] */ -#define WM8915_DSP2RX_EQ_B3_B_WIDTH 16 /* DSP2RX_EQ_B3_B - [15:0] */ - -/* - * R1419 (0x58B) - DSP2 RX EQ Band 3 C - */ -#define WM8915_DSP2RX_EQ_B3_C_MASK 0xFFFF /* DSP2RX_EQ_B3_C - [15:0] */ -#define WM8915_DSP2RX_EQ_B3_C_SHIFT 0 /* DSP2RX_EQ_B3_C - [15:0] */ -#define WM8915_DSP2RX_EQ_B3_C_WIDTH 16 /* DSP2RX_EQ_B3_C - [15:0] */ - -/* - * R1420 (0x58C) - DSP2 RX EQ Band 3 PG - */ -#define WM8915_DSP2RX_EQ_B3_PG_MASK 0xFFFF /* DSP2RX_EQ_B3_PG - [15:0] */ -#define WM8915_DSP2RX_EQ_B3_PG_SHIFT 0 /* DSP2RX_EQ_B3_PG - [15:0] */ -#define WM8915_DSP2RX_EQ_B3_PG_WIDTH 16 /* DSP2RX_EQ_B3_PG - [15:0] */ - -/* - * R1421 (0x58D) - DSP2 RX EQ Band 4 A - */ -#define WM8915_DSP2RX_EQ_B4_A_MASK 0xFFFF /* DSP2RX_EQ_B4_A - [15:0] */ -#define WM8915_DSP2RX_EQ_B4_A_SHIFT 0 /* DSP2RX_EQ_B4_A - [15:0] */ -#define WM8915_DSP2RX_EQ_B4_A_WIDTH 16 /* DSP2RX_EQ_B4_A - [15:0] */ - -/* - * R1422 (0x58E) - DSP2 RX EQ Band 4 B - */ -#define WM8915_DSP2RX_EQ_B4_B_MASK 0xFFFF /* DSP2RX_EQ_B4_B - [15:0] */ -#define WM8915_DSP2RX_EQ_B4_B_SHIFT 0 /* DSP2RX_EQ_B4_B - [15:0] */ -#define WM8915_DSP2RX_EQ_B4_B_WIDTH 16 /* DSP2RX_EQ_B4_B - [15:0] */ - -/* - * R1423 (0x58F) - DSP2 RX EQ Band 4 C - */ -#define WM8915_DSP2RX_EQ_B4_C_MASK 0xFFFF /* DSP2RX_EQ_B4_C - [15:0] */ -#define WM8915_DSP2RX_EQ_B4_C_SHIFT 0 /* DSP2RX_EQ_B4_C - [15:0] */ -#define WM8915_DSP2RX_EQ_B4_C_WIDTH 16 /* DSP2RX_EQ_B4_C - [15:0] */ - -/* - * R1424 (0x590) - DSP2 RX EQ Band 4 PG - */ -#define WM8915_DSP2RX_EQ_B4_PG_MASK 0xFFFF /* DSP2RX_EQ_B4_PG - [15:0] */ -#define WM8915_DSP2RX_EQ_B4_PG_SHIFT 0 /* DSP2RX_EQ_B4_PG - [15:0] */ -#define WM8915_DSP2RX_EQ_B4_PG_WIDTH 16 /* DSP2RX_EQ_B4_PG - [15:0] */ - -/* - * R1425 (0x591) - DSP2 RX EQ Band 5 A - */ -#define WM8915_DSP2RX_EQ_B5_A_MASK 0xFFFF /* DSP2RX_EQ_B5_A - [15:0] */ -#define WM8915_DSP2RX_EQ_B5_A_SHIFT 0 /* DSP2RX_EQ_B5_A - [15:0] */ -#define WM8915_DSP2RX_EQ_B5_A_WIDTH 16 /* DSP2RX_EQ_B5_A - [15:0] */ - -/* - * R1426 (0x592) - DSP2 RX EQ Band 5 B - */ -#define WM8915_DSP2RX_EQ_B5_B_MASK 0xFFFF /* DSP2RX_EQ_B5_B - [15:0] */ -#define WM8915_DSP2RX_EQ_B5_B_SHIFT 0 /* DSP2RX_EQ_B5_B - [15:0] */ -#define WM8915_DSP2RX_EQ_B5_B_WIDTH 16 /* DSP2RX_EQ_B5_B - [15:0] */ - -/* - * R1427 (0x593) - DSP2 RX EQ Band 5 PG - */ -#define WM8915_DSP2RX_EQ_B5_PG_MASK 0xFFFF /* DSP2RX_EQ_B5_PG - [15:0] */ -#define WM8915_DSP2RX_EQ_B5_PG_SHIFT 0 /* DSP2RX_EQ_B5_PG - [15:0] */ -#define WM8915_DSP2RX_EQ_B5_PG_WIDTH 16 /* DSP2RX_EQ_B5_PG - [15:0] */ - -/* - * R1536 (0x600) - DAC1 Mixer Volumes - */ -#define WM8915_ADCR_DAC1_VOL_MASK 0x03E0 /* ADCR_DAC1_VOL - [9:5] */ -#define WM8915_ADCR_DAC1_VOL_SHIFT 5 /* ADCR_DAC1_VOL - [9:5] */ -#define WM8915_ADCR_DAC1_VOL_WIDTH 5 /* ADCR_DAC1_VOL - [9:5] */ -#define WM8915_ADCL_DAC1_VOL_MASK 0x001F /* ADCL_DAC1_VOL - [4:0] */ -#define WM8915_ADCL_DAC1_VOL_SHIFT 0 /* ADCL_DAC1_VOL - [4:0] */ -#define WM8915_ADCL_DAC1_VOL_WIDTH 5 /* ADCL_DAC1_VOL - [4:0] */ - -/* - * R1537 (0x601) - DAC1 Left Mixer Routing - */ -#define WM8915_ADCR_TO_DAC1L 0x0020 /* ADCR_TO_DAC1L */ -#define WM8915_ADCR_TO_DAC1L_MASK 0x0020 /* ADCR_TO_DAC1L */ -#define WM8915_ADCR_TO_DAC1L_SHIFT 5 /* ADCR_TO_DAC1L */ -#define WM8915_ADCR_TO_DAC1L_WIDTH 1 /* ADCR_TO_DAC1L */ -#define WM8915_ADCL_TO_DAC1L 0x0010 /* ADCL_TO_DAC1L */ -#define WM8915_ADCL_TO_DAC1L_MASK 0x0010 /* ADCL_TO_DAC1L */ -#define WM8915_ADCL_TO_DAC1L_SHIFT 4 /* ADCL_TO_DAC1L */ -#define WM8915_ADCL_TO_DAC1L_WIDTH 1 /* ADCL_TO_DAC1L */ -#define WM8915_DSP2RXL_TO_DAC1L 0x0002 /* DSP2RXL_TO_DAC1L */ -#define WM8915_DSP2RXL_TO_DAC1L_MASK 0x0002 /* DSP2RXL_TO_DAC1L */ -#define WM8915_DSP2RXL_TO_DAC1L_SHIFT 1 /* DSP2RXL_TO_DAC1L */ -#define WM8915_DSP2RXL_TO_DAC1L_WIDTH 1 /* DSP2RXL_TO_DAC1L */ -#define WM8915_DSP1RXL_TO_DAC1L 0x0001 /* DSP1RXL_TO_DAC1L */ -#define WM8915_DSP1RXL_TO_DAC1L_MASK 0x0001 /* DSP1RXL_TO_DAC1L */ -#define WM8915_DSP1RXL_TO_DAC1L_SHIFT 0 /* DSP1RXL_TO_DAC1L */ -#define WM8915_DSP1RXL_TO_DAC1L_WIDTH 1 /* DSP1RXL_TO_DAC1L */ - -/* - * R1538 (0x602) - DAC1 Right Mixer Routing - */ -#define WM8915_ADCR_TO_DAC1R 0x0020 /* ADCR_TO_DAC1R */ -#define WM8915_ADCR_TO_DAC1R_MASK 0x0020 /* ADCR_TO_DAC1R */ -#define WM8915_ADCR_TO_DAC1R_SHIFT 5 /* ADCR_TO_DAC1R */ -#define WM8915_ADCR_TO_DAC1R_WIDTH 1 /* ADCR_TO_DAC1R */ -#define WM8915_ADCL_TO_DAC1R 0x0010 /* ADCL_TO_DAC1R */ -#define WM8915_ADCL_TO_DAC1R_MASK 0x0010 /* ADCL_TO_DAC1R */ -#define WM8915_ADCL_TO_DAC1R_SHIFT 4 /* ADCL_TO_DAC1R */ -#define WM8915_ADCL_TO_DAC1R_WIDTH 1 /* ADCL_TO_DAC1R */ -#define WM8915_DSP2RXR_TO_DAC1R 0x0002 /* DSP2RXR_TO_DAC1R */ -#define WM8915_DSP2RXR_TO_DAC1R_MASK 0x0002 /* DSP2RXR_TO_DAC1R */ -#define WM8915_DSP2RXR_TO_DAC1R_SHIFT 1 /* DSP2RXR_TO_DAC1R */ -#define WM8915_DSP2RXR_TO_DAC1R_WIDTH 1 /* DSP2RXR_TO_DAC1R */ -#define WM8915_DSP1RXR_TO_DAC1R 0x0001 /* DSP1RXR_TO_DAC1R */ -#define WM8915_DSP1RXR_TO_DAC1R_MASK 0x0001 /* DSP1RXR_TO_DAC1R */ -#define WM8915_DSP1RXR_TO_DAC1R_SHIFT 0 /* DSP1RXR_TO_DAC1R */ -#define WM8915_DSP1RXR_TO_DAC1R_WIDTH 1 /* DSP1RXR_TO_DAC1R */ - -/* - * R1539 (0x603) - DAC2 Mixer Volumes - */ -#define WM8915_ADCR_DAC2_VOL_MASK 0x03E0 /* ADCR_DAC2_VOL - [9:5] */ -#define WM8915_ADCR_DAC2_VOL_SHIFT 5 /* ADCR_DAC2_VOL - [9:5] */ -#define WM8915_ADCR_DAC2_VOL_WIDTH 5 /* ADCR_DAC2_VOL - [9:5] */ -#define WM8915_ADCL_DAC2_VOL_MASK 0x001F /* ADCL_DAC2_VOL - [4:0] */ -#define WM8915_ADCL_DAC2_VOL_SHIFT 0 /* ADCL_DAC2_VOL - [4:0] */ -#define WM8915_ADCL_DAC2_VOL_WIDTH 5 /* ADCL_DAC2_VOL - [4:0] */ - -/* - * R1540 (0x604) - DAC2 Left Mixer Routing - */ -#define WM8915_ADCR_TO_DAC2L 0x0020 /* ADCR_TO_DAC2L */ -#define WM8915_ADCR_TO_DAC2L_MASK 0x0020 /* ADCR_TO_DAC2L */ -#define WM8915_ADCR_TO_DAC2L_SHIFT 5 /* ADCR_TO_DAC2L */ -#define WM8915_ADCR_TO_DAC2L_WIDTH 1 /* ADCR_TO_DAC2L */ -#define WM8915_ADCL_TO_DAC2L 0x0010 /* ADCL_TO_DAC2L */ -#define WM8915_ADCL_TO_DAC2L_MASK 0x0010 /* ADCL_TO_DAC2L */ -#define WM8915_ADCL_TO_DAC2L_SHIFT 4 /* ADCL_TO_DAC2L */ -#define WM8915_ADCL_TO_DAC2L_WIDTH 1 /* ADCL_TO_DAC2L */ -#define WM8915_DSP2RXL_TO_DAC2L 0x0002 /* DSP2RXL_TO_DAC2L */ -#define WM8915_DSP2RXL_TO_DAC2L_MASK 0x0002 /* DSP2RXL_TO_DAC2L */ -#define WM8915_DSP2RXL_TO_DAC2L_SHIFT 1 /* DSP2RXL_TO_DAC2L */ -#define WM8915_DSP2RXL_TO_DAC2L_WIDTH 1 /* DSP2RXL_TO_DAC2L */ -#define WM8915_DSP1RXL_TO_DAC2L 0x0001 /* DSP1RXL_TO_DAC2L */ -#define WM8915_DSP1RXL_TO_DAC2L_MASK 0x0001 /* DSP1RXL_TO_DAC2L */ -#define WM8915_DSP1RXL_TO_DAC2L_SHIFT 0 /* DSP1RXL_TO_DAC2L */ -#define WM8915_DSP1RXL_TO_DAC2L_WIDTH 1 /* DSP1RXL_TO_DAC2L */ - -/* - * R1541 (0x605) - DAC2 Right Mixer Routing - */ -#define WM8915_ADCR_TO_DAC2R 0x0020 /* ADCR_TO_DAC2R */ -#define WM8915_ADCR_TO_DAC2R_MASK 0x0020 /* ADCR_TO_DAC2R */ -#define WM8915_ADCR_TO_DAC2R_SHIFT 5 /* ADCR_TO_DAC2R */ -#define WM8915_ADCR_TO_DAC2R_WIDTH 1 /* ADCR_TO_DAC2R */ -#define WM8915_ADCL_TO_DAC2R 0x0010 /* ADCL_TO_DAC2R */ -#define WM8915_ADCL_TO_DAC2R_MASK 0x0010 /* ADCL_TO_DAC2R */ -#define WM8915_ADCL_TO_DAC2R_SHIFT 4 /* ADCL_TO_DAC2R */ -#define WM8915_ADCL_TO_DAC2R_WIDTH 1 /* ADCL_TO_DAC2R */ -#define WM8915_DSP2RXR_TO_DAC2R 0x0002 /* DSP2RXR_TO_DAC2R */ -#define WM8915_DSP2RXR_TO_DAC2R_MASK 0x0002 /* DSP2RXR_TO_DAC2R */ -#define WM8915_DSP2RXR_TO_DAC2R_SHIFT 1 /* DSP2RXR_TO_DAC2R */ -#define WM8915_DSP2RXR_TO_DAC2R_WIDTH 1 /* DSP2RXR_TO_DAC2R */ -#define WM8915_DSP1RXR_TO_DAC2R 0x0001 /* DSP1RXR_TO_DAC2R */ -#define WM8915_DSP1RXR_TO_DAC2R_MASK 0x0001 /* DSP1RXR_TO_DAC2R */ -#define WM8915_DSP1RXR_TO_DAC2R_SHIFT 0 /* DSP1RXR_TO_DAC2R */ -#define WM8915_DSP1RXR_TO_DAC2R_WIDTH 1 /* DSP1RXR_TO_DAC2R */ - -/* - * R1542 (0x606) - DSP1 TX Left Mixer Routing - */ -#define WM8915_ADC1L_TO_DSP1TXL 0x0002 /* ADC1L_TO_DSP1TXL */ -#define WM8915_ADC1L_TO_DSP1TXL_MASK 0x0002 /* ADC1L_TO_DSP1TXL */ -#define WM8915_ADC1L_TO_DSP1TXL_SHIFT 1 /* ADC1L_TO_DSP1TXL */ -#define WM8915_ADC1L_TO_DSP1TXL_WIDTH 1 /* ADC1L_TO_DSP1TXL */ -#define WM8915_DACL_TO_DSP1TXL 0x0001 /* DACL_TO_DSP1TXL */ -#define WM8915_DACL_TO_DSP1TXL_MASK 0x0001 /* DACL_TO_DSP1TXL */ -#define WM8915_DACL_TO_DSP1TXL_SHIFT 0 /* DACL_TO_DSP1TXL */ -#define WM8915_DACL_TO_DSP1TXL_WIDTH 1 /* DACL_TO_DSP1TXL */ - -/* - * R1543 (0x607) - DSP1 TX Right Mixer Routing - */ -#define WM8915_ADC1R_TO_DSP1TXR 0x0002 /* ADC1R_TO_DSP1TXR */ -#define WM8915_ADC1R_TO_DSP1TXR_MASK 0x0002 /* ADC1R_TO_DSP1TXR */ -#define WM8915_ADC1R_TO_DSP1TXR_SHIFT 1 /* ADC1R_TO_DSP1TXR */ -#define WM8915_ADC1R_TO_DSP1TXR_WIDTH 1 /* ADC1R_TO_DSP1TXR */ -#define WM8915_DACR_TO_DSP1TXR 0x0001 /* DACR_TO_DSP1TXR */ -#define WM8915_DACR_TO_DSP1TXR_MASK 0x0001 /* DACR_TO_DSP1TXR */ -#define WM8915_DACR_TO_DSP1TXR_SHIFT 0 /* DACR_TO_DSP1TXR */ -#define WM8915_DACR_TO_DSP1TXR_WIDTH 1 /* DACR_TO_DSP1TXR */ - -/* - * R1544 (0x608) - DSP2 TX Left Mixer Routing - */ -#define WM8915_ADC2L_TO_DSP2TXL 0x0002 /* ADC2L_TO_DSP2TXL */ -#define WM8915_ADC2L_TO_DSP2TXL_MASK 0x0002 /* ADC2L_TO_DSP2TXL */ -#define WM8915_ADC2L_TO_DSP2TXL_SHIFT 1 /* ADC2L_TO_DSP2TXL */ -#define WM8915_ADC2L_TO_DSP2TXL_WIDTH 1 /* ADC2L_TO_DSP2TXL */ -#define WM8915_DACL_TO_DSP2TXL 0x0001 /* DACL_TO_DSP2TXL */ -#define WM8915_DACL_TO_DSP2TXL_MASK 0x0001 /* DACL_TO_DSP2TXL */ -#define WM8915_DACL_TO_DSP2TXL_SHIFT 0 /* DACL_TO_DSP2TXL */ -#define WM8915_DACL_TO_DSP2TXL_WIDTH 1 /* DACL_TO_DSP2TXL */ - -/* - * R1545 (0x609) - DSP2 TX Right Mixer Routing - */ -#define WM8915_ADC2R_TO_DSP2TXR 0x0002 /* ADC2R_TO_DSP2TXR */ -#define WM8915_ADC2R_TO_DSP2TXR_MASK 0x0002 /* ADC2R_TO_DSP2TXR */ -#define WM8915_ADC2R_TO_DSP2TXR_SHIFT 1 /* ADC2R_TO_DSP2TXR */ -#define WM8915_ADC2R_TO_DSP2TXR_WIDTH 1 /* ADC2R_TO_DSP2TXR */ -#define WM8915_DACR_TO_DSP2TXR 0x0001 /* DACR_TO_DSP2TXR */ -#define WM8915_DACR_TO_DSP2TXR_MASK 0x0001 /* DACR_TO_DSP2TXR */ -#define WM8915_DACR_TO_DSP2TXR_SHIFT 0 /* DACR_TO_DSP2TXR */ -#define WM8915_DACR_TO_DSP2TXR_WIDTH 1 /* DACR_TO_DSP2TXR */ - -/* - * R1546 (0x60A) - DSP TX Mixer Select - */ -#define WM8915_DAC_TO_DSPTX_SRC 0x0001 /* DAC_TO_DSPTX_SRC */ -#define WM8915_DAC_TO_DSPTX_SRC_MASK 0x0001 /* DAC_TO_DSPTX_SRC */ -#define WM8915_DAC_TO_DSPTX_SRC_SHIFT 0 /* DAC_TO_DSPTX_SRC */ -#define WM8915_DAC_TO_DSPTX_SRC_WIDTH 1 /* DAC_TO_DSPTX_SRC */ - -/* - * R1552 (0x610) - DAC Softmute - */ -#define WM8915_DAC_SOFTMUTEMODE 0x0002 /* DAC_SOFTMUTEMODE */ -#define WM8915_DAC_SOFTMUTEMODE_MASK 0x0002 /* DAC_SOFTMUTEMODE */ -#define WM8915_DAC_SOFTMUTEMODE_SHIFT 1 /* DAC_SOFTMUTEMODE */ -#define WM8915_DAC_SOFTMUTEMODE_WIDTH 1 /* DAC_SOFTMUTEMODE */ -#define WM8915_DAC_MUTERATE 0x0001 /* DAC_MUTERATE */ -#define WM8915_DAC_MUTERATE_MASK 0x0001 /* DAC_MUTERATE */ -#define WM8915_DAC_MUTERATE_SHIFT 0 /* DAC_MUTERATE */ -#define WM8915_DAC_MUTERATE_WIDTH 1 /* DAC_MUTERATE */ - -/* - * R1568 (0x620) - Oversampling - */ -#define WM8915_SPK_OSR128 0x0008 /* SPK_OSR128 */ -#define WM8915_SPK_OSR128_MASK 0x0008 /* SPK_OSR128 */ -#define WM8915_SPK_OSR128_SHIFT 3 /* SPK_OSR128 */ -#define WM8915_SPK_OSR128_WIDTH 1 /* SPK_OSR128 */ -#define WM8915_DMIC_OSR64 0x0004 /* DMIC_OSR64 */ -#define WM8915_DMIC_OSR64_MASK 0x0004 /* DMIC_OSR64 */ -#define WM8915_DMIC_OSR64_SHIFT 2 /* DMIC_OSR64 */ -#define WM8915_DMIC_OSR64_WIDTH 1 /* DMIC_OSR64 */ -#define WM8915_ADC_OSR128 0x0002 /* ADC_OSR128 */ -#define WM8915_ADC_OSR128_MASK 0x0002 /* ADC_OSR128 */ -#define WM8915_ADC_OSR128_SHIFT 1 /* ADC_OSR128 */ -#define WM8915_ADC_OSR128_WIDTH 1 /* ADC_OSR128 */ -#define WM8915_DAC_OSR128 0x0001 /* DAC_OSR128 */ -#define WM8915_DAC_OSR128_MASK 0x0001 /* DAC_OSR128 */ -#define WM8915_DAC_OSR128_SHIFT 0 /* DAC_OSR128 */ -#define WM8915_DAC_OSR128_WIDTH 1 /* DAC_OSR128 */ - -/* - * R1569 (0x621) - Sidetone - */ -#define WM8915_ST_LPF 0x1000 /* ST_LPF */ -#define WM8915_ST_LPF_MASK 0x1000 /* ST_LPF */ -#define WM8915_ST_LPF_SHIFT 12 /* ST_LPF */ -#define WM8915_ST_LPF_WIDTH 1 /* ST_LPF */ -#define WM8915_ST_HPF_CUT_MASK 0x0380 /* ST_HPF_CUT - [9:7] */ -#define WM8915_ST_HPF_CUT_SHIFT 7 /* ST_HPF_CUT - [9:7] */ -#define WM8915_ST_HPF_CUT_WIDTH 3 /* ST_HPF_CUT - [9:7] */ -#define WM8915_ST_HPF 0x0040 /* ST_HPF */ -#define WM8915_ST_HPF_MASK 0x0040 /* ST_HPF */ -#define WM8915_ST_HPF_SHIFT 6 /* ST_HPF */ -#define WM8915_ST_HPF_WIDTH 1 /* ST_HPF */ -#define WM8915_STR_SEL 0x0002 /* STR_SEL */ -#define WM8915_STR_SEL_MASK 0x0002 /* STR_SEL */ -#define WM8915_STR_SEL_SHIFT 1 /* STR_SEL */ -#define WM8915_STR_SEL_WIDTH 1 /* STR_SEL */ -#define WM8915_STL_SEL 0x0001 /* STL_SEL */ -#define WM8915_STL_SEL_MASK 0x0001 /* STL_SEL */ -#define WM8915_STL_SEL_SHIFT 0 /* STL_SEL */ -#define WM8915_STL_SEL_WIDTH 1 /* STL_SEL */ - -/* - * R1792 (0x700) - GPIO 1 - */ -#define WM8915_GP1_DIR 0x8000 /* GP1_DIR */ -#define WM8915_GP1_DIR_MASK 0x8000 /* GP1_DIR */ -#define WM8915_GP1_DIR_SHIFT 15 /* GP1_DIR */ -#define WM8915_GP1_DIR_WIDTH 1 /* GP1_DIR */ -#define WM8915_GP1_PU 0x4000 /* GP1_PU */ -#define WM8915_GP1_PU_MASK 0x4000 /* GP1_PU */ -#define WM8915_GP1_PU_SHIFT 14 /* GP1_PU */ -#define WM8915_GP1_PU_WIDTH 1 /* GP1_PU */ -#define WM8915_GP1_PD 0x2000 /* GP1_PD */ -#define WM8915_GP1_PD_MASK 0x2000 /* GP1_PD */ -#define WM8915_GP1_PD_SHIFT 13 /* GP1_PD */ -#define WM8915_GP1_PD_WIDTH 1 /* GP1_PD */ -#define WM8915_GP1_POL 0x0400 /* GP1_POL */ -#define WM8915_GP1_POL_MASK 0x0400 /* GP1_POL */ -#define WM8915_GP1_POL_SHIFT 10 /* GP1_POL */ -#define WM8915_GP1_POL_WIDTH 1 /* GP1_POL */ -#define WM8915_GP1_OP_CFG 0x0200 /* GP1_OP_CFG */ -#define WM8915_GP1_OP_CFG_MASK 0x0200 /* GP1_OP_CFG */ -#define WM8915_GP1_OP_CFG_SHIFT 9 /* GP1_OP_CFG */ -#define WM8915_GP1_OP_CFG_WIDTH 1 /* GP1_OP_CFG */ -#define WM8915_GP1_DB 0x0100 /* GP1_DB */ -#define WM8915_GP1_DB_MASK 0x0100 /* GP1_DB */ -#define WM8915_GP1_DB_SHIFT 8 /* GP1_DB */ -#define WM8915_GP1_DB_WIDTH 1 /* GP1_DB */ -#define WM8915_GP1_LVL 0x0040 /* GP1_LVL */ -#define WM8915_GP1_LVL_MASK 0x0040 /* GP1_LVL */ -#define WM8915_GP1_LVL_SHIFT 6 /* GP1_LVL */ -#define WM8915_GP1_LVL_WIDTH 1 /* GP1_LVL */ -#define WM8915_GP1_FN_MASK 0x000F /* GP1_FN - [3:0] */ -#define WM8915_GP1_FN_SHIFT 0 /* GP1_FN - [3:0] */ -#define WM8915_GP1_FN_WIDTH 4 /* GP1_FN - [3:0] */ - -/* - * R1793 (0x701) - GPIO 2 - */ -#define WM8915_GP2_DIR 0x8000 /* GP2_DIR */ -#define WM8915_GP2_DIR_MASK 0x8000 /* GP2_DIR */ -#define WM8915_GP2_DIR_SHIFT 15 /* GP2_DIR */ -#define WM8915_GP2_DIR_WIDTH 1 /* GP2_DIR */ -#define WM8915_GP2_PU 0x4000 /* GP2_PU */ -#define WM8915_GP2_PU_MASK 0x4000 /* GP2_PU */ -#define WM8915_GP2_PU_SHIFT 14 /* GP2_PU */ -#define WM8915_GP2_PU_WIDTH 1 /* GP2_PU */ -#define WM8915_GP2_PD 0x2000 /* GP2_PD */ -#define WM8915_GP2_PD_MASK 0x2000 /* GP2_PD */ -#define WM8915_GP2_PD_SHIFT 13 /* GP2_PD */ -#define WM8915_GP2_PD_WIDTH 1 /* GP2_PD */ -#define WM8915_GP2_POL 0x0400 /* GP2_POL */ -#define WM8915_GP2_POL_MASK 0x0400 /* GP2_POL */ -#define WM8915_GP2_POL_SHIFT 10 /* GP2_POL */ -#define WM8915_GP2_POL_WIDTH 1 /* GP2_POL */ -#define WM8915_GP2_OP_CFG 0x0200 /* GP2_OP_CFG */ -#define WM8915_GP2_OP_CFG_MASK 0x0200 /* GP2_OP_CFG */ -#define WM8915_GP2_OP_CFG_SHIFT 9 /* GP2_OP_CFG */ -#define WM8915_GP2_OP_CFG_WIDTH 1 /* GP2_OP_CFG */ -#define WM8915_GP2_DB 0x0100 /* GP2_DB */ -#define WM8915_GP2_DB_MASK 0x0100 /* GP2_DB */ -#define WM8915_GP2_DB_SHIFT 8 /* GP2_DB */ -#define WM8915_GP2_DB_WIDTH 1 /* GP2_DB */ -#define WM8915_GP2_LVL 0x0040 /* GP2_LVL */ -#define WM8915_GP2_LVL_MASK 0x0040 /* GP2_LVL */ -#define WM8915_GP2_LVL_SHIFT 6 /* GP2_LVL */ -#define WM8915_GP2_LVL_WIDTH 1 /* GP2_LVL */ -#define WM8915_GP2_FN_MASK 0x000F /* GP2_FN - [3:0] */ -#define WM8915_GP2_FN_SHIFT 0 /* GP2_FN - [3:0] */ -#define WM8915_GP2_FN_WIDTH 4 /* GP2_FN - [3:0] */ - -/* - * R1794 (0x702) - GPIO 3 - */ -#define WM8915_GP3_DIR 0x8000 /* GP3_DIR */ -#define WM8915_GP3_DIR_MASK 0x8000 /* GP3_DIR */ -#define WM8915_GP3_DIR_SHIFT 15 /* GP3_DIR */ -#define WM8915_GP3_DIR_WIDTH 1 /* GP3_DIR */ -#define WM8915_GP3_PU 0x4000 /* GP3_PU */ -#define WM8915_GP3_PU_MASK 0x4000 /* GP3_PU */ -#define WM8915_GP3_PU_SHIFT 14 /* GP3_PU */ -#define WM8915_GP3_PU_WIDTH 1 /* GP3_PU */ -#define WM8915_GP3_PD 0x2000 /* GP3_PD */ -#define WM8915_GP3_PD_MASK 0x2000 /* GP3_PD */ -#define WM8915_GP3_PD_SHIFT 13 /* GP3_PD */ -#define WM8915_GP3_PD_WIDTH 1 /* GP3_PD */ -#define WM8915_GP3_POL 0x0400 /* GP3_POL */ -#define WM8915_GP3_POL_MASK 0x0400 /* GP3_POL */ -#define WM8915_GP3_POL_SHIFT 10 /* GP3_POL */ -#define WM8915_GP3_POL_WIDTH 1 /* GP3_POL */ -#define WM8915_GP3_OP_CFG 0x0200 /* GP3_OP_CFG */ -#define WM8915_GP3_OP_CFG_MASK 0x0200 /* GP3_OP_CFG */ -#define WM8915_GP3_OP_CFG_SHIFT 9 /* GP3_OP_CFG */ -#define WM8915_GP3_OP_CFG_WIDTH 1 /* GP3_OP_CFG */ -#define WM8915_GP3_DB 0x0100 /* GP3_DB */ -#define WM8915_GP3_DB_MASK 0x0100 /* GP3_DB */ -#define WM8915_GP3_DB_SHIFT 8 /* GP3_DB */ -#define WM8915_GP3_DB_WIDTH 1 /* GP3_DB */ -#define WM8915_GP3_LVL 0x0040 /* GP3_LVL */ -#define WM8915_GP3_LVL_MASK 0x0040 /* GP3_LVL */ -#define WM8915_GP3_LVL_SHIFT 6 /* GP3_LVL */ -#define WM8915_GP3_LVL_WIDTH 1 /* GP3_LVL */ -#define WM8915_GP3_FN_MASK 0x000F /* GP3_FN - [3:0] */ -#define WM8915_GP3_FN_SHIFT 0 /* GP3_FN - [3:0] */ -#define WM8915_GP3_FN_WIDTH 4 /* GP3_FN - [3:0] */ - -/* - * R1795 (0x703) - GPIO 4 - */ -#define WM8915_GP4_DIR 0x8000 /* GP4_DIR */ -#define WM8915_GP4_DIR_MASK 0x8000 /* GP4_DIR */ -#define WM8915_GP4_DIR_SHIFT 15 /* GP4_DIR */ -#define WM8915_GP4_DIR_WIDTH 1 /* GP4_DIR */ -#define WM8915_GP4_PU 0x4000 /* GP4_PU */ -#define WM8915_GP4_PU_MASK 0x4000 /* GP4_PU */ -#define WM8915_GP4_PU_SHIFT 14 /* GP4_PU */ -#define WM8915_GP4_PU_WIDTH 1 /* GP4_PU */ -#define WM8915_GP4_PD 0x2000 /* GP4_PD */ -#define WM8915_GP4_PD_MASK 0x2000 /* GP4_PD */ -#define WM8915_GP4_PD_SHIFT 13 /* GP4_PD */ -#define WM8915_GP4_PD_WIDTH 1 /* GP4_PD */ -#define WM8915_GP4_POL 0x0400 /* GP4_POL */ -#define WM8915_GP4_POL_MASK 0x0400 /* GP4_POL */ -#define WM8915_GP4_POL_SHIFT 10 /* GP4_POL */ -#define WM8915_GP4_POL_WIDTH 1 /* GP4_POL */ -#define WM8915_GP4_OP_CFG 0x0200 /* GP4_OP_CFG */ -#define WM8915_GP4_OP_CFG_MASK 0x0200 /* GP4_OP_CFG */ -#define WM8915_GP4_OP_CFG_SHIFT 9 /* GP4_OP_CFG */ -#define WM8915_GP4_OP_CFG_WIDTH 1 /* GP4_OP_CFG */ -#define WM8915_GP4_DB 0x0100 /* GP4_DB */ -#define WM8915_GP4_DB_MASK 0x0100 /* GP4_DB */ -#define WM8915_GP4_DB_SHIFT 8 /* GP4_DB */ -#define WM8915_GP4_DB_WIDTH 1 /* GP4_DB */ -#define WM8915_GP4_LVL 0x0040 /* GP4_LVL */ -#define WM8915_GP4_LVL_MASK 0x0040 /* GP4_LVL */ -#define WM8915_GP4_LVL_SHIFT 6 /* GP4_LVL */ -#define WM8915_GP4_LVL_WIDTH 1 /* GP4_LVL */ -#define WM8915_GP4_FN_MASK 0x000F /* GP4_FN - [3:0] */ -#define WM8915_GP4_FN_SHIFT 0 /* GP4_FN - [3:0] */ -#define WM8915_GP4_FN_WIDTH 4 /* GP4_FN - [3:0] */ - -/* - * R1796 (0x704) - GPIO 5 - */ -#define WM8915_GP5_DIR 0x8000 /* GP5_DIR */ -#define WM8915_GP5_DIR_MASK 0x8000 /* GP5_DIR */ -#define WM8915_GP5_DIR_SHIFT 15 /* GP5_DIR */ -#define WM8915_GP5_DIR_WIDTH 1 /* GP5_DIR */ -#define WM8915_GP5_PU 0x4000 /* GP5_PU */ -#define WM8915_GP5_PU_MASK 0x4000 /* GP5_PU */ -#define WM8915_GP5_PU_SHIFT 14 /* GP5_PU */ -#define WM8915_GP5_PU_WIDTH 1 /* GP5_PU */ -#define WM8915_GP5_PD 0x2000 /* GP5_PD */ -#define WM8915_GP5_PD_MASK 0x2000 /* GP5_PD */ -#define WM8915_GP5_PD_SHIFT 13 /* GP5_PD */ -#define WM8915_GP5_PD_WIDTH 1 /* GP5_PD */ -#define WM8915_GP5_POL 0x0400 /* GP5_POL */ -#define WM8915_GP5_POL_MASK 0x0400 /* GP5_POL */ -#define WM8915_GP5_POL_SHIFT 10 /* GP5_POL */ -#define WM8915_GP5_POL_WIDTH 1 /* GP5_POL */ -#define WM8915_GP5_OP_CFG 0x0200 /* GP5_OP_CFG */ -#define WM8915_GP5_OP_CFG_MASK 0x0200 /* GP5_OP_CFG */ -#define WM8915_GP5_OP_CFG_SHIFT 9 /* GP5_OP_CFG */ -#define WM8915_GP5_OP_CFG_WIDTH 1 /* GP5_OP_CFG */ -#define WM8915_GP5_DB 0x0100 /* GP5_DB */ -#define WM8915_GP5_DB_MASK 0x0100 /* GP5_DB */ -#define WM8915_GP5_DB_SHIFT 8 /* GP5_DB */ -#define WM8915_GP5_DB_WIDTH 1 /* GP5_DB */ -#define WM8915_GP5_LVL 0x0040 /* GP5_LVL */ -#define WM8915_GP5_LVL_MASK 0x0040 /* GP5_LVL */ -#define WM8915_GP5_LVL_SHIFT 6 /* GP5_LVL */ -#define WM8915_GP5_LVL_WIDTH 1 /* GP5_LVL */ -#define WM8915_GP5_FN_MASK 0x000F /* GP5_FN - [3:0] */ -#define WM8915_GP5_FN_SHIFT 0 /* GP5_FN - [3:0] */ -#define WM8915_GP5_FN_WIDTH 4 /* GP5_FN - [3:0] */ - -/* - * R1824 (0x720) - Pull Control (1) - */ -#define WM8915_DMICDAT2_PD 0x1000 /* DMICDAT2_PD */ -#define WM8915_DMICDAT2_PD_MASK 0x1000 /* DMICDAT2_PD */ -#define WM8915_DMICDAT2_PD_SHIFT 12 /* DMICDAT2_PD */ -#define WM8915_DMICDAT2_PD_WIDTH 1 /* DMICDAT2_PD */ -#define WM8915_DMICDAT1_PD 0x0400 /* DMICDAT1_PD */ -#define WM8915_DMICDAT1_PD_MASK 0x0400 /* DMICDAT1_PD */ -#define WM8915_DMICDAT1_PD_SHIFT 10 /* DMICDAT1_PD */ -#define WM8915_DMICDAT1_PD_WIDTH 1 /* DMICDAT1_PD */ -#define WM8915_MCLK2_PU 0x0200 /* MCLK2_PU */ -#define WM8915_MCLK2_PU_MASK 0x0200 /* MCLK2_PU */ -#define WM8915_MCLK2_PU_SHIFT 9 /* MCLK2_PU */ -#define WM8915_MCLK2_PU_WIDTH 1 /* MCLK2_PU */ -#define WM8915_MCLK2_PD 0x0100 /* MCLK2_PD */ -#define WM8915_MCLK2_PD_MASK 0x0100 /* MCLK2_PD */ -#define WM8915_MCLK2_PD_SHIFT 8 /* MCLK2_PD */ -#define WM8915_MCLK2_PD_WIDTH 1 /* MCLK2_PD */ -#define WM8915_MCLK1_PU 0x0080 /* MCLK1_PU */ -#define WM8915_MCLK1_PU_MASK 0x0080 /* MCLK1_PU */ -#define WM8915_MCLK1_PU_SHIFT 7 /* MCLK1_PU */ -#define WM8915_MCLK1_PU_WIDTH 1 /* MCLK1_PU */ -#define WM8915_MCLK1_PD 0x0040 /* MCLK1_PD */ -#define WM8915_MCLK1_PD_MASK 0x0040 /* MCLK1_PD */ -#define WM8915_MCLK1_PD_SHIFT 6 /* MCLK1_PD */ -#define WM8915_MCLK1_PD_WIDTH 1 /* MCLK1_PD */ -#define WM8915_DACDAT1_PU 0x0020 /* DACDAT1_PU */ -#define WM8915_DACDAT1_PU_MASK 0x0020 /* DACDAT1_PU */ -#define WM8915_DACDAT1_PU_SHIFT 5 /* DACDAT1_PU */ -#define WM8915_DACDAT1_PU_WIDTH 1 /* DACDAT1_PU */ -#define WM8915_DACDAT1_PD 0x0010 /* DACDAT1_PD */ -#define WM8915_DACDAT1_PD_MASK 0x0010 /* DACDAT1_PD */ -#define WM8915_DACDAT1_PD_SHIFT 4 /* DACDAT1_PD */ -#define WM8915_DACDAT1_PD_WIDTH 1 /* DACDAT1_PD */ -#define WM8915_DACLRCLK1_PU 0x0008 /* DACLRCLK1_PU */ -#define WM8915_DACLRCLK1_PU_MASK 0x0008 /* DACLRCLK1_PU */ -#define WM8915_DACLRCLK1_PU_SHIFT 3 /* DACLRCLK1_PU */ -#define WM8915_DACLRCLK1_PU_WIDTH 1 /* DACLRCLK1_PU */ -#define WM8915_DACLRCLK1_PD 0x0004 /* DACLRCLK1_PD */ -#define WM8915_DACLRCLK1_PD_MASK 0x0004 /* DACLRCLK1_PD */ -#define WM8915_DACLRCLK1_PD_SHIFT 2 /* DACLRCLK1_PD */ -#define WM8915_DACLRCLK1_PD_WIDTH 1 /* DACLRCLK1_PD */ -#define WM8915_BCLK1_PU 0x0002 /* BCLK1_PU */ -#define WM8915_BCLK1_PU_MASK 0x0002 /* BCLK1_PU */ -#define WM8915_BCLK1_PU_SHIFT 1 /* BCLK1_PU */ -#define WM8915_BCLK1_PU_WIDTH 1 /* BCLK1_PU */ -#define WM8915_BCLK1_PD 0x0001 /* BCLK1_PD */ -#define WM8915_BCLK1_PD_MASK 0x0001 /* BCLK1_PD */ -#define WM8915_BCLK1_PD_SHIFT 0 /* BCLK1_PD */ -#define WM8915_BCLK1_PD_WIDTH 1 /* BCLK1_PD */ - -/* - * R1825 (0x721) - Pull Control (2) - */ -#define WM8915_LDO1ENA_PD 0x0100 /* LDO1ENA_PD */ -#define WM8915_LDO1ENA_PD_MASK 0x0100 /* LDO1ENA_PD */ -#define WM8915_LDO1ENA_PD_SHIFT 8 /* LDO1ENA_PD */ -#define WM8915_LDO1ENA_PD_WIDTH 1 /* LDO1ENA_PD */ -#define WM8915_ADDR_PD 0x0040 /* ADDR_PD */ -#define WM8915_ADDR_PD_MASK 0x0040 /* ADDR_PD */ -#define WM8915_ADDR_PD_SHIFT 6 /* ADDR_PD */ -#define WM8915_ADDR_PD_WIDTH 1 /* ADDR_PD */ -#define WM8915_DACDAT2_PU 0x0020 /* DACDAT2_PU */ -#define WM8915_DACDAT2_PU_MASK 0x0020 /* DACDAT2_PU */ -#define WM8915_DACDAT2_PU_SHIFT 5 /* DACDAT2_PU */ -#define WM8915_DACDAT2_PU_WIDTH 1 /* DACDAT2_PU */ -#define WM8915_DACDAT2_PD 0x0010 /* DACDAT2_PD */ -#define WM8915_DACDAT2_PD_MASK 0x0010 /* DACDAT2_PD */ -#define WM8915_DACDAT2_PD_SHIFT 4 /* DACDAT2_PD */ -#define WM8915_DACDAT2_PD_WIDTH 1 /* DACDAT2_PD */ -#define WM8915_DACLRCLK2_PU 0x0008 /* DACLRCLK2_PU */ -#define WM8915_DACLRCLK2_PU_MASK 0x0008 /* DACLRCLK2_PU */ -#define WM8915_DACLRCLK2_PU_SHIFT 3 /* DACLRCLK2_PU */ -#define WM8915_DACLRCLK2_PU_WIDTH 1 /* DACLRCLK2_PU */ -#define WM8915_DACLRCLK2_PD 0x0004 /* DACLRCLK2_PD */ -#define WM8915_DACLRCLK2_PD_MASK 0x0004 /* DACLRCLK2_PD */ -#define WM8915_DACLRCLK2_PD_SHIFT 2 /* DACLRCLK2_PD */ -#define WM8915_DACLRCLK2_PD_WIDTH 1 /* DACLRCLK2_PD */ -#define WM8915_BCLK2_PU 0x0002 /* BCLK2_PU */ -#define WM8915_BCLK2_PU_MASK 0x0002 /* BCLK2_PU */ -#define WM8915_BCLK2_PU_SHIFT 1 /* BCLK2_PU */ -#define WM8915_BCLK2_PU_WIDTH 1 /* BCLK2_PU */ -#define WM8915_BCLK2_PD 0x0001 /* BCLK2_PD */ -#define WM8915_BCLK2_PD_MASK 0x0001 /* BCLK2_PD */ -#define WM8915_BCLK2_PD_SHIFT 0 /* BCLK2_PD */ -#define WM8915_BCLK2_PD_WIDTH 1 /* BCLK2_PD */ - -/* - * R1840 (0x730) - Interrupt Status 1 - */ -#define WM8915_GP5_EINT 0x0010 /* GP5_EINT */ -#define WM8915_GP5_EINT_MASK 0x0010 /* GP5_EINT */ -#define WM8915_GP5_EINT_SHIFT 4 /* GP5_EINT */ -#define WM8915_GP5_EINT_WIDTH 1 /* GP5_EINT */ -#define WM8915_GP4_EINT 0x0008 /* GP4_EINT */ -#define WM8915_GP4_EINT_MASK 0x0008 /* GP4_EINT */ -#define WM8915_GP4_EINT_SHIFT 3 /* GP4_EINT */ -#define WM8915_GP4_EINT_WIDTH 1 /* GP4_EINT */ -#define WM8915_GP3_EINT 0x0004 /* GP3_EINT */ -#define WM8915_GP3_EINT_MASK 0x0004 /* GP3_EINT */ -#define WM8915_GP3_EINT_SHIFT 2 /* GP3_EINT */ -#define WM8915_GP3_EINT_WIDTH 1 /* GP3_EINT */ -#define WM8915_GP2_EINT 0x0002 /* GP2_EINT */ -#define WM8915_GP2_EINT_MASK 0x0002 /* GP2_EINT */ -#define WM8915_GP2_EINT_SHIFT 1 /* GP2_EINT */ -#define WM8915_GP2_EINT_WIDTH 1 /* GP2_EINT */ -#define WM8915_GP1_EINT 0x0001 /* GP1_EINT */ -#define WM8915_GP1_EINT_MASK 0x0001 /* GP1_EINT */ -#define WM8915_GP1_EINT_SHIFT 0 /* GP1_EINT */ -#define WM8915_GP1_EINT_WIDTH 1 /* GP1_EINT */ - -/* - * R1841 (0x731) - Interrupt Status 2 - */ -#define WM8915_DCS_DONE_23_EINT 0x1000 /* DCS_DONE_23_EINT */ -#define WM8915_DCS_DONE_23_EINT_MASK 0x1000 /* DCS_DONE_23_EINT */ -#define WM8915_DCS_DONE_23_EINT_SHIFT 12 /* DCS_DONE_23_EINT */ -#define WM8915_DCS_DONE_23_EINT_WIDTH 1 /* DCS_DONE_23_EINT */ -#define WM8915_DCS_DONE_01_EINT 0x0800 /* DCS_DONE_01_EINT */ -#define WM8915_DCS_DONE_01_EINT_MASK 0x0800 /* DCS_DONE_01_EINT */ -#define WM8915_DCS_DONE_01_EINT_SHIFT 11 /* DCS_DONE_01_EINT */ -#define WM8915_DCS_DONE_01_EINT_WIDTH 1 /* DCS_DONE_01_EINT */ -#define WM8915_WSEQ_DONE_EINT 0x0400 /* WSEQ_DONE_EINT */ -#define WM8915_WSEQ_DONE_EINT_MASK 0x0400 /* WSEQ_DONE_EINT */ -#define WM8915_WSEQ_DONE_EINT_SHIFT 10 /* WSEQ_DONE_EINT */ -#define WM8915_WSEQ_DONE_EINT_WIDTH 1 /* WSEQ_DONE_EINT */ -#define WM8915_FIFOS_ERR_EINT 0x0200 /* FIFOS_ERR_EINT */ -#define WM8915_FIFOS_ERR_EINT_MASK 0x0200 /* FIFOS_ERR_EINT */ -#define WM8915_FIFOS_ERR_EINT_SHIFT 9 /* FIFOS_ERR_EINT */ -#define WM8915_FIFOS_ERR_EINT_WIDTH 1 /* FIFOS_ERR_EINT */ -#define WM8915_DSP2DRC_SIG_DET_EINT 0x0080 /* DSP2DRC_SIG_DET_EINT */ -#define WM8915_DSP2DRC_SIG_DET_EINT_MASK 0x0080 /* DSP2DRC_SIG_DET_EINT */ -#define WM8915_DSP2DRC_SIG_DET_EINT_SHIFT 7 /* DSP2DRC_SIG_DET_EINT */ -#define WM8915_DSP2DRC_SIG_DET_EINT_WIDTH 1 /* DSP2DRC_SIG_DET_EINT */ -#define WM8915_DSP1DRC_SIG_DET_EINT 0x0040 /* DSP1DRC_SIG_DET_EINT */ -#define WM8915_DSP1DRC_SIG_DET_EINT_MASK 0x0040 /* DSP1DRC_SIG_DET_EINT */ -#define WM8915_DSP1DRC_SIG_DET_EINT_SHIFT 6 /* DSP1DRC_SIG_DET_EINT */ -#define WM8915_DSP1DRC_SIG_DET_EINT_WIDTH 1 /* DSP1DRC_SIG_DET_EINT */ -#define WM8915_FLL_SW_CLK_DONE_EINT 0x0008 /* FLL_SW_CLK_DONE_EINT */ -#define WM8915_FLL_SW_CLK_DONE_EINT_MASK 0x0008 /* FLL_SW_CLK_DONE_EINT */ -#define WM8915_FLL_SW_CLK_DONE_EINT_SHIFT 3 /* FLL_SW_CLK_DONE_EINT */ -#define WM8915_FLL_SW_CLK_DONE_EINT_WIDTH 1 /* FLL_SW_CLK_DONE_EINT */ -#define WM8915_FLL_LOCK_EINT 0x0004 /* FLL_LOCK_EINT */ -#define WM8915_FLL_LOCK_EINT_MASK 0x0004 /* FLL_LOCK_EINT */ -#define WM8915_FLL_LOCK_EINT_SHIFT 2 /* FLL_LOCK_EINT */ -#define WM8915_FLL_LOCK_EINT_WIDTH 1 /* FLL_LOCK_EINT */ -#define WM8915_HP_DONE_EINT 0x0002 /* HP_DONE_EINT */ -#define WM8915_HP_DONE_EINT_MASK 0x0002 /* HP_DONE_EINT */ -#define WM8915_HP_DONE_EINT_SHIFT 1 /* HP_DONE_EINT */ -#define WM8915_HP_DONE_EINT_WIDTH 1 /* HP_DONE_EINT */ -#define WM8915_MICD_EINT 0x0001 /* MICD_EINT */ -#define WM8915_MICD_EINT_MASK 0x0001 /* MICD_EINT */ -#define WM8915_MICD_EINT_SHIFT 0 /* MICD_EINT */ -#define WM8915_MICD_EINT_WIDTH 1 /* MICD_EINT */ - -/* - * R1842 (0x732) - Interrupt Raw Status 2 - */ -#define WM8915_DCS_DONE_23_STS 0x1000 /* DCS_DONE_23_STS */ -#define WM8915_DCS_DONE_23_STS_MASK 0x1000 /* DCS_DONE_23_STS */ -#define WM8915_DCS_DONE_23_STS_SHIFT 12 /* DCS_DONE_23_STS */ -#define WM8915_DCS_DONE_23_STS_WIDTH 1 /* DCS_DONE_23_STS */ -#define WM8915_DCS_DONE_01_STS 0x0800 /* DCS_DONE_01_STS */ -#define WM8915_DCS_DONE_01_STS_MASK 0x0800 /* DCS_DONE_01_STS */ -#define WM8915_DCS_DONE_01_STS_SHIFT 11 /* DCS_DONE_01_STS */ -#define WM8915_DCS_DONE_01_STS_WIDTH 1 /* DCS_DONE_01_STS */ -#define WM8915_WSEQ_DONE_STS 0x0400 /* WSEQ_DONE_STS */ -#define WM8915_WSEQ_DONE_STS_MASK 0x0400 /* WSEQ_DONE_STS */ -#define WM8915_WSEQ_DONE_STS_SHIFT 10 /* WSEQ_DONE_STS */ -#define WM8915_WSEQ_DONE_STS_WIDTH 1 /* WSEQ_DONE_STS */ -#define WM8915_FIFOS_ERR_STS 0x0200 /* FIFOS_ERR_STS */ -#define WM8915_FIFOS_ERR_STS_MASK 0x0200 /* FIFOS_ERR_STS */ -#define WM8915_FIFOS_ERR_STS_SHIFT 9 /* FIFOS_ERR_STS */ -#define WM8915_FIFOS_ERR_STS_WIDTH 1 /* FIFOS_ERR_STS */ -#define WM8915_DSP2DRC_SIG_DET_STS 0x0080 /* DSP2DRC_SIG_DET_STS */ -#define WM8915_DSP2DRC_SIG_DET_STS_MASK 0x0080 /* DSP2DRC_SIG_DET_STS */ -#define WM8915_DSP2DRC_SIG_DET_STS_SHIFT 7 /* DSP2DRC_SIG_DET_STS */ -#define WM8915_DSP2DRC_SIG_DET_STS_WIDTH 1 /* DSP2DRC_SIG_DET_STS */ -#define WM8915_DSP1DRC_SIG_DET_STS 0x0040 /* DSP1DRC_SIG_DET_STS */ -#define WM8915_DSP1DRC_SIG_DET_STS_MASK 0x0040 /* DSP1DRC_SIG_DET_STS */ -#define WM8915_DSP1DRC_SIG_DET_STS_SHIFT 6 /* DSP1DRC_SIG_DET_STS */ -#define WM8915_DSP1DRC_SIG_DET_STS_WIDTH 1 /* DSP1DRC_SIG_DET_STS */ -#define WM8915_FLL_LOCK_STS 0x0004 /* FLL_LOCK_STS */ -#define WM8915_FLL_LOCK_STS_MASK 0x0004 /* FLL_LOCK_STS */ -#define WM8915_FLL_LOCK_STS_SHIFT 2 /* FLL_LOCK_STS */ -#define WM8915_FLL_LOCK_STS_WIDTH 1 /* FLL_LOCK_STS */ - -/* - * R1848 (0x738) - Interrupt Status 1 Mask - */ -#define WM8915_IM_GP5_EINT 0x0010 /* IM_GP5_EINT */ -#define WM8915_IM_GP5_EINT_MASK 0x0010 /* IM_GP5_EINT */ -#define WM8915_IM_GP5_EINT_SHIFT 4 /* IM_GP5_EINT */ -#define WM8915_IM_GP5_EINT_WIDTH 1 /* IM_GP5_EINT */ -#define WM8915_IM_GP4_EINT 0x0008 /* IM_GP4_EINT */ -#define WM8915_IM_GP4_EINT_MASK 0x0008 /* IM_GP4_EINT */ -#define WM8915_IM_GP4_EINT_SHIFT 3 /* IM_GP4_EINT */ -#define WM8915_IM_GP4_EINT_WIDTH 1 /* IM_GP4_EINT */ -#define WM8915_IM_GP3_EINT 0x0004 /* IM_GP3_EINT */ -#define WM8915_IM_GP3_EINT_MASK 0x0004 /* IM_GP3_EINT */ -#define WM8915_IM_GP3_EINT_SHIFT 2 /* IM_GP3_EINT */ -#define WM8915_IM_GP3_EINT_WIDTH 1 /* IM_GP3_EINT */ -#define WM8915_IM_GP2_EINT 0x0002 /* IM_GP2_EINT */ -#define WM8915_IM_GP2_EINT_MASK 0x0002 /* IM_GP2_EINT */ -#define WM8915_IM_GP2_EINT_SHIFT 1 /* IM_GP2_EINT */ -#define WM8915_IM_GP2_EINT_WIDTH 1 /* IM_GP2_EINT */ -#define WM8915_IM_GP1_EINT 0x0001 /* IM_GP1_EINT */ -#define WM8915_IM_GP1_EINT_MASK 0x0001 /* IM_GP1_EINT */ -#define WM8915_IM_GP1_EINT_SHIFT 0 /* IM_GP1_EINT */ -#define WM8915_IM_GP1_EINT_WIDTH 1 /* IM_GP1_EINT */ - -/* - * R1849 (0x739) - Interrupt Status 2 Mask - */ -#define WM8915_IM_DCS_DONE_23_EINT 0x1000 /* IM_DCS_DONE_23_EINT */ -#define WM8915_IM_DCS_DONE_23_EINT_MASK 0x1000 /* IM_DCS_DONE_23_EINT */ -#define WM8915_IM_DCS_DONE_23_EINT_SHIFT 12 /* IM_DCS_DONE_23_EINT */ -#define WM8915_IM_DCS_DONE_23_EINT_WIDTH 1 /* IM_DCS_DONE_23_EINT */ -#define WM8915_IM_DCS_DONE_01_EINT 0x0800 /* IM_DCS_DONE_01_EINT */ -#define WM8915_IM_DCS_DONE_01_EINT_MASK 0x0800 /* IM_DCS_DONE_01_EINT */ -#define WM8915_IM_DCS_DONE_01_EINT_SHIFT 11 /* IM_DCS_DONE_01_EINT */ -#define WM8915_IM_DCS_DONE_01_EINT_WIDTH 1 /* IM_DCS_DONE_01_EINT */ -#define WM8915_IM_WSEQ_DONE_EINT 0x0400 /* IM_WSEQ_DONE_EINT */ -#define WM8915_IM_WSEQ_DONE_EINT_MASK 0x0400 /* IM_WSEQ_DONE_EINT */ -#define WM8915_IM_WSEQ_DONE_EINT_SHIFT 10 /* IM_WSEQ_DONE_EINT */ -#define WM8915_IM_WSEQ_DONE_EINT_WIDTH 1 /* IM_WSEQ_DONE_EINT */ -#define WM8915_IM_FIFOS_ERR_EINT 0x0200 /* IM_FIFOS_ERR_EINT */ -#define WM8915_IM_FIFOS_ERR_EINT_MASK 0x0200 /* IM_FIFOS_ERR_EINT */ -#define WM8915_IM_FIFOS_ERR_EINT_SHIFT 9 /* IM_FIFOS_ERR_EINT */ -#define WM8915_IM_FIFOS_ERR_EINT_WIDTH 1 /* IM_FIFOS_ERR_EINT */ -#define WM8915_IM_DSP2DRC_SIG_DET_EINT 0x0080 /* IM_DSP2DRC_SIG_DET_EINT */ -#define WM8915_IM_DSP2DRC_SIG_DET_EINT_MASK 0x0080 /* IM_DSP2DRC_SIG_DET_EINT */ -#define WM8915_IM_DSP2DRC_SIG_DET_EINT_SHIFT 7 /* IM_DSP2DRC_SIG_DET_EINT */ -#define WM8915_IM_DSP2DRC_SIG_DET_EINT_WIDTH 1 /* IM_DSP2DRC_SIG_DET_EINT */ -#define WM8915_IM_DSP1DRC_SIG_DET_EINT 0x0040 /* IM_DSP1DRC_SIG_DET_EINT */ -#define WM8915_IM_DSP1DRC_SIG_DET_EINT_MASK 0x0040 /* IM_DSP1DRC_SIG_DET_EINT */ -#define WM8915_IM_DSP1DRC_SIG_DET_EINT_SHIFT 6 /* IM_DSP1DRC_SIG_DET_EINT */ -#define WM8915_IM_DSP1DRC_SIG_DET_EINT_WIDTH 1 /* IM_DSP1DRC_SIG_DET_EINT */ -#define WM8915_IM_FLL_SW_CLK_DONE_EINT 0x0008 /* IM_FLL_SW_CLK_DONE_EINT */ -#define WM8915_IM_FLL_SW_CLK_DONE_EINT_MASK 0x0008 /* IM_FLL_SW_CLK_DONE_EINT */ -#define WM8915_IM_FLL_SW_CLK_DONE_EINT_SHIFT 3 /* IM_FLL_SW_CLK_DONE_EINT */ -#define WM8915_IM_FLL_SW_CLK_DONE_EINT_WIDTH 1 /* IM_FLL_SW_CLK_DONE_EINT */ -#define WM8915_IM_FLL_LOCK_EINT 0x0004 /* IM_FLL_LOCK_EINT */ -#define WM8915_IM_FLL_LOCK_EINT_MASK 0x0004 /* IM_FLL_LOCK_EINT */ -#define WM8915_IM_FLL_LOCK_EINT_SHIFT 2 /* IM_FLL_LOCK_EINT */ -#define WM8915_IM_FLL_LOCK_EINT_WIDTH 1 /* IM_FLL_LOCK_EINT */ -#define WM8915_IM_HP_DONE_EINT 0x0002 /* IM_HP_DONE_EINT */ -#define WM8915_IM_HP_DONE_EINT_MASK 0x0002 /* IM_HP_DONE_EINT */ -#define WM8915_IM_HP_DONE_EINT_SHIFT 1 /* IM_HP_DONE_EINT */ -#define WM8915_IM_HP_DONE_EINT_WIDTH 1 /* IM_HP_DONE_EINT */ -#define WM8915_IM_MICD_EINT 0x0001 /* IM_MICD_EINT */ -#define WM8915_IM_MICD_EINT_MASK 0x0001 /* IM_MICD_EINT */ -#define WM8915_IM_MICD_EINT_SHIFT 0 /* IM_MICD_EINT */ -#define WM8915_IM_MICD_EINT_WIDTH 1 /* IM_MICD_EINT */ - -/* - * R1856 (0x740) - Interrupt Control - */ -#define WM8915_IM_IRQ 0x0001 /* IM_IRQ */ -#define WM8915_IM_IRQ_MASK 0x0001 /* IM_IRQ */ -#define WM8915_IM_IRQ_SHIFT 0 /* IM_IRQ */ -#define WM8915_IM_IRQ_WIDTH 1 /* IM_IRQ */ - -/* - * R2048 (0x800) - Left PDM Speaker - */ -#define WM8915_SPKL_ENA 0x0010 /* SPKL_ENA */ -#define WM8915_SPKL_ENA_MASK 0x0010 /* SPKL_ENA */ -#define WM8915_SPKL_ENA_SHIFT 4 /* SPKL_ENA */ -#define WM8915_SPKL_ENA_WIDTH 1 /* SPKL_ENA */ -#define WM8915_SPKL_MUTE 0x0008 /* SPKL_MUTE */ -#define WM8915_SPKL_MUTE_MASK 0x0008 /* SPKL_MUTE */ -#define WM8915_SPKL_MUTE_SHIFT 3 /* SPKL_MUTE */ -#define WM8915_SPKL_MUTE_WIDTH 1 /* SPKL_MUTE */ -#define WM8915_SPKL_MUTE_ZC 0x0004 /* SPKL_MUTE_ZC */ -#define WM8915_SPKL_MUTE_ZC_MASK 0x0004 /* SPKL_MUTE_ZC */ -#define WM8915_SPKL_MUTE_ZC_SHIFT 2 /* SPKL_MUTE_ZC */ -#define WM8915_SPKL_MUTE_ZC_WIDTH 1 /* SPKL_MUTE_ZC */ -#define WM8915_SPKL_SRC_MASK 0x0003 /* SPKL_SRC - [1:0] */ -#define WM8915_SPKL_SRC_SHIFT 0 /* SPKL_SRC - [1:0] */ -#define WM8915_SPKL_SRC_WIDTH 2 /* SPKL_SRC - [1:0] */ - -/* - * R2049 (0x801) - Right PDM Speaker - */ -#define WM8915_SPKR_ENA 0x0010 /* SPKR_ENA */ -#define WM8915_SPKR_ENA_MASK 0x0010 /* SPKR_ENA */ -#define WM8915_SPKR_ENA_SHIFT 4 /* SPKR_ENA */ -#define WM8915_SPKR_ENA_WIDTH 1 /* SPKR_ENA */ -#define WM8915_SPKR_MUTE 0x0008 /* SPKR_MUTE */ -#define WM8915_SPKR_MUTE_MASK 0x0008 /* SPKR_MUTE */ -#define WM8915_SPKR_MUTE_SHIFT 3 /* SPKR_MUTE */ -#define WM8915_SPKR_MUTE_WIDTH 1 /* SPKR_MUTE */ -#define WM8915_SPKR_MUTE_ZC 0x0004 /* SPKR_MUTE_ZC */ -#define WM8915_SPKR_MUTE_ZC_MASK 0x0004 /* SPKR_MUTE_ZC */ -#define WM8915_SPKR_MUTE_ZC_SHIFT 2 /* SPKR_MUTE_ZC */ -#define WM8915_SPKR_MUTE_ZC_WIDTH 1 /* SPKR_MUTE_ZC */ -#define WM8915_SPKR_SRC_MASK 0x0003 /* SPKR_SRC - [1:0] */ -#define WM8915_SPKR_SRC_SHIFT 0 /* SPKR_SRC - [1:0] */ -#define WM8915_SPKR_SRC_WIDTH 2 /* SPKR_SRC - [1:0] */ - -/* - * R2050 (0x802) - PDM Speaker Mute Sequence - */ -#define WM8915_SPK_MUTE_ENDIAN 0x0100 /* SPK_MUTE_ENDIAN */ -#define WM8915_SPK_MUTE_ENDIAN_MASK 0x0100 /* SPK_MUTE_ENDIAN */ -#define WM8915_SPK_MUTE_ENDIAN_SHIFT 8 /* SPK_MUTE_ENDIAN */ -#define WM8915_SPK_MUTE_ENDIAN_WIDTH 1 /* SPK_MUTE_ENDIAN */ -#define WM8915_SPK_MUTE_SEQ1_MASK 0x00FF /* SPK_MUTE_SEQ1 - [7:0] */ -#define WM8915_SPK_MUTE_SEQ1_SHIFT 0 /* SPK_MUTE_SEQ1 - [7:0] */ -#define WM8915_SPK_MUTE_SEQ1_WIDTH 8 /* SPK_MUTE_SEQ1 - [7:0] */ - -/* - * R2051 (0x803) - PDM Speaker Volume - */ -#define WM8915_SPKR_VOL_MASK 0x00F0 /* SPKR_VOL - [7:4] */ -#define WM8915_SPKR_VOL_SHIFT 4 /* SPKR_VOL - [7:4] */ -#define WM8915_SPKR_VOL_WIDTH 4 /* SPKR_VOL - [7:4] */ -#define WM8915_SPKL_VOL_MASK 0x000F /* SPKL_VOL - [3:0] */ -#define WM8915_SPKL_VOL_SHIFT 0 /* SPKL_VOL - [3:0] */ -#define WM8915_SPKL_VOL_WIDTH 4 /* SPKL_VOL - [3:0] */ - -#endif diff --git a/sound/soc/codecs/wm8996.c b/sound/soc/codecs/wm8996.c new file mode 100644 index 00000000000..ab8e9d1aaff --- /dev/null +++ b/sound/soc/codecs/wm8996.c @@ -0,0 +1,2994 @@ +/* + * wm8996.c - WM8996 audio codec interface + * + * Copyright 2011 Wolfson Microelectronics PLC. + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/completion.h> +#include <linux/delay.h> +#include <linux/pm.h> +#include <linux/gcd.h> +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> +#include <linux/workqueue.h> +#include <sound/core.h> +#include <sound/jack.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/initval.h> +#include <sound/tlv.h> +#include <trace/events/asoc.h> + +#include <sound/wm8996.h> +#include "wm8996.h" + +#define WM8996_AIFS 2 + +#define HPOUT1L 1 +#define HPOUT1R 2 +#define HPOUT2L 4 +#define HPOUT2R 8 + +#define WM8996_NUM_SUPPLIES 4 +static const char *wm8996_supply_names[WM8996_NUM_SUPPLIES] = { + "DBVDD", + "AVDD1", + "AVDD2", + "CPVDD", +}; + +struct wm8996_priv { + struct snd_soc_codec *codec; + + int ldo1ena; + + int sysclk; + int sysclk_src; + + int fll_src; + int fll_fref; + int fll_fout; + + struct completion fll_lock; + + u16 dcs_pending; + struct completion dcs_done; + + u16 hpout_ena; + u16 hpout_pending; + + struct regulator_bulk_data supplies[WM8996_NUM_SUPPLIES]; + struct notifier_block disable_nb[WM8996_NUM_SUPPLIES]; + + struct wm8996_pdata pdata; + + int rx_rate[WM8996_AIFS]; + int bclk_rate[WM8996_AIFS]; + + /* Platform dependant ReTune mobile configuration */ + int num_retune_mobile_texts; + const char **retune_mobile_texts; + int retune_mobile_cfg[2]; + struct soc_enum retune_mobile_enum; + + struct snd_soc_jack *jack; + bool detecting; + bool jack_mic; + wm8996_polarity_fn polarity_cb; + +#ifdef CONFIG_GPIOLIB + struct gpio_chip gpio_chip; +#endif +}; + +/* We can't use the same notifier block for more than one supply and + * there's no way I can see to get from a callback to the caller + * except container_of(). + */ +#define WM8996_REGULATOR_EVENT(n) \ +static int wm8996_regulator_event_##n(struct notifier_block *nb, \ + unsigned long event, void *data) \ +{ \ + struct wm8996_priv *wm8996 = container_of(nb, struct wm8996_priv, \ + disable_nb[n]); \ + if (event & REGULATOR_EVENT_DISABLE) { \ + wm8996->codec->cache_sync = 1; \ + } \ + return 0; \ +} + +WM8996_REGULATOR_EVENT(0) +WM8996_REGULATOR_EVENT(1) +WM8996_REGULATOR_EVENT(2) +WM8996_REGULATOR_EVENT(3) + +static const u16 wm8996_reg[WM8996_MAX_REGISTER] = { + [WM8996_SOFTWARE_RESET] = 0x8996, + [WM8996_POWER_MANAGEMENT_7] = 0x10, + [WM8996_DAC1_HPOUT1_VOLUME] = 0x88, + [WM8996_DAC2_HPOUT2_VOLUME] = 0x88, + [WM8996_DAC1_LEFT_VOLUME] = 0x2c0, + [WM8996_DAC1_RIGHT_VOLUME] = 0x2c0, + [WM8996_DAC2_LEFT_VOLUME] = 0x2c0, + [WM8996_DAC2_RIGHT_VOLUME] = 0x2c0, + [WM8996_OUTPUT1_LEFT_VOLUME] = 0x80, + [WM8996_OUTPUT1_RIGHT_VOLUME] = 0x80, + [WM8996_OUTPUT2_LEFT_VOLUME] = 0x80, + [WM8996_OUTPUT2_RIGHT_VOLUME] = 0x80, + [WM8996_MICBIAS_1] = 0x39, + [WM8996_MICBIAS_2] = 0x39, + [WM8996_LDO_1] = 0x3, + [WM8996_LDO_2] = 0x13, + [WM8996_ACCESSORY_DETECT_MODE_1] = 0x4, + [WM8996_HEADPHONE_DETECT_1] = 0x20, + [WM8996_MIC_DETECT_1] = 0x7600, + [WM8996_MIC_DETECT_2] = 0xbf, + [WM8996_CHARGE_PUMP_1] = 0x1f25, + [WM8996_CHARGE_PUMP_2] = 0xab19, + [WM8996_DC_SERVO_5] = 0x2a2a, + [WM8996_CONTROL_INTERFACE_1] = 0x8004, + [WM8996_CLOCKING_1] = 0x10, + [WM8996_AIF_RATE] = 0x83, + [WM8996_FLL_CONTROL_4] = 0x5dc0, + [WM8996_FLL_CONTROL_5] = 0xc84, + [WM8996_FLL_EFS_2] = 0x2, + [WM8996_AIF1_TX_LRCLK_1] = 0x80, + [WM8996_AIF1_TX_LRCLK_2] = 0x8, + [WM8996_AIF1_RX_LRCLK_1] = 0x80, + [WM8996_AIF1TX_DATA_CONFIGURATION_1] = 0x1818, + [WM8996_AIF1RX_DATA_CONFIGURATION] = 0x1818, + [WM8996_AIF1TX_TEST] = 0x7, + [WM8996_AIF2_TX_LRCLK_1] = 0x80, + [WM8996_AIF2_TX_LRCLK_2] = 0x8, + [WM8996_AIF2_RX_LRCLK_1] = 0x80, + [WM8996_AIF2TX_DATA_CONFIGURATION_1] = 0x1818, + [WM8996_AIF2RX_DATA_CONFIGURATION] = 0x1818, + [WM8996_AIF2TX_TEST] = 0x1, + [WM8996_DSP1_TX_LEFT_VOLUME] = 0xc0, + [WM8996_DSP1_TX_RIGHT_VOLUME] = 0xc0, + [WM8996_DSP1_RX_LEFT_VOLUME] = 0xc0, + [WM8996_DSP1_RX_RIGHT_VOLUME] = 0xc0, + [WM8996_DSP1_TX_FILTERS] = 0x2000, + [WM8996_DSP1_RX_FILTERS_1] = 0x200, + [WM8996_DSP1_RX_FILTERS_2] = 0x10, + [WM8996_DSP1_DRC_1] = 0x98, + [WM8996_DSP1_DRC_2] = 0x845, + [WM8996_DSP1_RX_EQ_GAINS_1] = 0x6318, + [WM8996_DSP1_RX_EQ_GAINS_2] = 0x6300, + [WM8996_DSP1_RX_EQ_BAND_1_A] = 0xfca, + [WM8996_DSP1_RX_EQ_BAND_1_B] = 0x400, + [WM8996_DSP1_RX_EQ_BAND_1_PG] = 0xd8, + [WM8996_DSP1_RX_EQ_BAND_2_A] = 0x1eb5, + [WM8996_DSP1_RX_EQ_BAND_2_B] = 0xf145, + [WM8996_DSP1_RX_EQ_BAND_2_C] = 0xb75, + [WM8996_DSP1_RX_EQ_BAND_2_PG] = 0x1c5, + [WM8996_DSP1_RX_EQ_BAND_3_A] = 0x1c58, + [WM8996_DSP1_RX_EQ_BAND_3_B] = 0xf373, + [WM8996_DSP1_RX_EQ_BAND_3_C] = 0xa54, + [WM8996_DSP1_RX_EQ_BAND_3_PG] = 0x558, + [WM8996_DSP1_RX_EQ_BAND_4_A] = 0x168e, + [WM8996_DSP1_RX_EQ_BAND_4_B] = 0xf829, + [WM8996_DSP1_RX_EQ_BAND_4_C] = 0x7ad, + [WM8996_DSP1_RX_EQ_BAND_4_PG] = 0x1103, + [WM8996_DSP1_RX_EQ_BAND_5_A] = 0x564, + [WM8996_DSP1_RX_EQ_BAND_5_B] = 0x559, + [WM8996_DSP1_RX_EQ_BAND_5_PG] = 0x4000, + [WM8996_DSP2_TX_LEFT_VOLUME] = 0xc0, + [WM8996_DSP2_TX_RIGHT_VOLUME] = 0xc0, + [WM8996_DSP2_RX_LEFT_VOLUME] = 0xc0, + [WM8996_DSP2_RX_RIGHT_VOLUME] = 0xc0, + [WM8996_DSP2_TX_FILTERS] = 0x2000, + [WM8996_DSP2_RX_FILTERS_1] = 0x200, + [WM8996_DSP2_RX_FILTERS_2] = 0x10, + [WM8996_DSP2_DRC_1] = 0x98, + [WM8996_DSP2_DRC_2] = 0x845, + [WM8996_DSP2_RX_EQ_GAINS_1] = 0x6318, + [WM8996_DSP2_RX_EQ_GAINS_2] = 0x6300, + [WM8996_DSP2_RX_EQ_BAND_1_A] = 0xfca, + [WM8996_DSP2_RX_EQ_BAND_1_B] = 0x400, + [WM8996_DSP2_RX_EQ_BAND_1_PG] = 0xd8, + [WM8996_DSP2_RX_EQ_BAND_2_A] = 0x1eb5, + [WM8996_DSP2_RX_EQ_BAND_2_B] = 0xf145, + [WM8996_DSP2_RX_EQ_BAND_2_C] = 0xb75, + [WM8996_DSP2_RX_EQ_BAND_2_PG] = 0x1c5, + [WM8996_DSP2_RX_EQ_BAND_3_A] = 0x1c58, + [WM8996_DSP2_RX_EQ_BAND_3_B] = 0xf373, + [WM8996_DSP2_RX_EQ_BAND_3_C] = 0xa54, + [WM8996_DSP2_RX_EQ_BAND_3_PG] = 0x558, + [WM8996_DSP2_RX_EQ_BAND_4_A] = 0x168e, + [WM8996_DSP2_RX_EQ_BAND_4_B] = 0xf829, + [WM8996_DSP2_RX_EQ_BAND_4_C] = 0x7ad, + [WM8996_DSP2_RX_EQ_BAND_4_PG] = 0x1103, + [WM8996_DSP2_RX_EQ_BAND_5_A] = 0x564, + [WM8996_DSP2_RX_EQ_BAND_5_B] = 0x559, + [WM8996_DSP2_RX_EQ_BAND_5_PG] = 0x4000, + [WM8996_OVERSAMPLING] = 0xd, + [WM8996_SIDETONE] = 0x1040, + [WM8996_GPIO_1] = 0xa101, + [WM8996_GPIO_2] = 0xa101, + [WM8996_GPIO_3] = 0xa101, + [WM8996_GPIO_4] = 0xa101, + [WM8996_GPIO_5] = 0xa101, + [WM8996_PULL_CONTROL_2] = 0x140, + [WM8996_INTERRUPT_STATUS_1_MASK] = 0x1f, + [WM8996_INTERRUPT_STATUS_2_MASK] = 0x1ecf, + [WM8996_RIGHT_PDM_SPEAKER] = 0x1, + [WM8996_PDM_SPEAKER_MUTE_SEQUENCE] = 0x69, + [WM8996_PDM_SPEAKER_VOLUME] = 0x66, + [WM8996_WRITE_SEQUENCER_0] = 0x1, + [WM8996_WRITE_SEQUENCER_1] = 0x1, + [WM8996_WRITE_SEQUENCER_3] = 0x6, + [WM8996_WRITE_SEQUENCER_4] = 0x40, + [WM8996_WRITE_SEQUENCER_5] = 0x1, + [WM8996_WRITE_SEQUENCER_6] = 0xf, + [WM8996_WRITE_SEQUENCER_7] = 0x6, + [WM8996_WRITE_SEQUENCER_8] = 0x1, + [WM8996_WRITE_SEQUENCER_9] = 0x3, + [WM8996_WRITE_SEQUENCER_10] = 0x104, + [WM8996_WRITE_SEQUENCER_12] = 0x60, + [WM8996_WRITE_SEQUENCER_13] = 0x11, + [WM8996_WRITE_SEQUENCER_14] = 0x401, + [WM8996_WRITE_SEQUENCER_16] = 0x50, + [WM8996_WRITE_SEQUENCER_17] = 0x3, + [WM8996_WRITE_SEQUENCER_18] = 0x100, + [WM8996_WRITE_SEQUENCER_20] = 0x51, + [WM8996_WRITE_SEQUENCER_21] = 0x3, + [WM8996_WRITE_SEQUENCER_22] = 0x104, + [WM8996_WRITE_SEQUENCER_23] = 0xa, + [WM8996_WRITE_SEQUENCER_24] = 0x60, + [WM8996_WRITE_SEQUENCER_25] = 0x3b, + [WM8996_WRITE_SEQUENCER_26] = 0x502, + [WM8996_WRITE_SEQUENCER_27] = 0x100, + [WM8996_WRITE_SEQUENCER_28] = 0x2fff, + [WM8996_WRITE_SEQUENCER_32] = 0x2fff, + [WM8996_WRITE_SEQUENCER_36] = 0x2fff, + [WM8996_WRITE_SEQUENCER_40] = 0x2fff, + [WM8996_WRITE_SEQUENCER_44] = 0x2fff, + [WM8996_WRITE_SEQUENCER_48] = 0x2fff, + [WM8996_WRITE_SEQUENCER_52] = 0x2fff, + [WM8996_WRITE_SEQUENCER_56] = 0x2fff, + [WM8996_WRITE_SEQUENCER_60] = 0x2fff, + [WM8996_WRITE_SEQUENCER_64] = 0x1, + [WM8996_WRITE_SEQUENCER_65] = 0x1, + [WM8996_WRITE_SEQUENCER_67] = 0x6, + [WM8996_WRITE_SEQUENCER_68] = 0x40, + [WM8996_WRITE_SEQUENCER_69] = 0x1, + [WM8996_WRITE_SEQUENCER_70] = 0xf, + [WM8996_WRITE_SEQUENCER_71] = 0x6, + [WM8996_WRITE_SEQUENCER_72] = 0x1, + [WM8996_WRITE_SEQUENCER_73] = 0x3, + [WM8996_WRITE_SEQUENCER_74] = 0x104, + [WM8996_WRITE_SEQUENCER_76] = 0x60, + [WM8996_WRITE_SEQUENCER_77] = 0x11, + [WM8996_WRITE_SEQUENCER_78] = 0x401, + [WM8996_WRITE_SEQUENCER_80] = 0x50, + [WM8996_WRITE_SEQUENCER_81] = 0x3, + [WM8996_WRITE_SEQUENCER_82] = 0x100, + [WM8996_WRITE_SEQUENCER_84] = 0x60, + [WM8996_WRITE_SEQUENCER_85] = 0x3b, + [WM8996_WRITE_SEQUENCER_86] = 0x502, + [WM8996_WRITE_SEQUENCER_87] = 0x100, + [WM8996_WRITE_SEQUENCER_88] = 0x2fff, + [WM8996_WRITE_SEQUENCER_92] = 0x2fff, + [WM8996_WRITE_SEQUENCER_96] = 0x2fff, + [WM8996_WRITE_SEQUENCER_100] = 0x2fff, + [WM8996_WRITE_SEQUENCER_104] = 0x2fff, + [WM8996_WRITE_SEQUENCER_108] = 0x2fff, + [WM8996_WRITE_SEQUENCER_112] = 0x2fff, + [WM8996_WRITE_SEQUENCER_116] = 0x2fff, + [WM8996_WRITE_SEQUENCER_120] = 0x2fff, + [WM8996_WRITE_SEQUENCER_124] = 0x2fff, + [WM8996_WRITE_SEQUENCER_128] = 0x1, + [WM8996_WRITE_SEQUENCER_129] = 0x1, + [WM8996_WRITE_SEQUENCER_131] = 0x6, + [WM8996_WRITE_SEQUENCER_132] = 0x40, + [WM8996_WRITE_SEQUENCER_133] = 0x1, + [WM8996_WRITE_SEQUENCER_134] = 0xf, + [WM8996_WRITE_SEQUENCER_135] = 0x6, + [WM8996_WRITE_SEQUENCER_136] = 0x1, + [WM8996_WRITE_SEQUENCER_137] = 0x3, + [WM8996_WRITE_SEQUENCER_138] = 0x106, + [WM8996_WRITE_SEQUENCER_140] = 0x61, + [WM8996_WRITE_SEQUENCER_141] = 0x11, + [WM8996_WRITE_SEQUENCER_142] = 0x401, + [WM8996_WRITE_SEQUENCER_144] = 0x50, + [WM8996_WRITE_SEQUENCER_145] = 0x3, + [WM8996_WRITE_SEQUENCER_146] = 0x102, + [WM8996_WRITE_SEQUENCER_148] = 0x51, + [WM8996_WRITE_SEQUENCER_149] = 0x3, + [WM8996_WRITE_SEQUENCER_150] = 0x106, + [WM8996_WRITE_SEQUENCER_151] = 0xa, + [WM8996_WRITE_SEQUENCER_152] = 0x61, + [WM8996_WRITE_SEQUENCER_153] = 0x3b, + [WM8996_WRITE_SEQUENCER_154] = 0x502, + [WM8996_WRITE_SEQUENCER_155] = 0x100, + [WM8996_WRITE_SEQUENCER_156] = 0x2fff, + [WM8996_WRITE_SEQUENCER_160] = 0x2fff, + [WM8996_WRITE_SEQUENCER_164] = 0x2fff, + [WM8996_WRITE_SEQUENCER_168] = 0x2fff, + [WM8996_WRITE_SEQUENCER_172] = 0x2fff, + [WM8996_WRITE_SEQUENCER_176] = 0x2fff, + [WM8996_WRITE_SEQUENCER_180] = 0x2fff, + [WM8996_WRITE_SEQUENCER_184] = 0x2fff, + [WM8996_WRITE_SEQUENCER_188] = 0x2fff, + [WM8996_WRITE_SEQUENCER_192] = 0x1, + [WM8996_WRITE_SEQUENCER_193] = 0x1, + [WM8996_WRITE_SEQUENCER_195] = 0x6, + [WM8996_WRITE_SEQUENCER_196] = 0x40, + [WM8996_WRITE_SEQUENCER_197] = 0x1, + [WM8996_WRITE_SEQUENCER_198] = 0xf, + [WM8996_WRITE_SEQUENCER_199] = 0x6, + [WM8996_WRITE_SEQUENCER_200] = 0x1, + [WM8996_WRITE_SEQUENCER_201] = 0x3, + [WM8996_WRITE_SEQUENCER_202] = 0x106, + [WM8996_WRITE_SEQUENCER_204] = 0x61, + [WM8996_WRITE_SEQUENCER_205] = 0x11, + [WM8996_WRITE_SEQUENCER_206] = 0x401, + [WM8996_WRITE_SEQUENCER_208] = 0x50, + [WM8996_WRITE_SEQUENCER_209] = 0x3, + [WM8996_WRITE_SEQUENCER_210] = 0x102, + [WM8996_WRITE_SEQUENCER_212] = 0x61, + [WM8996_WRITE_SEQUENCER_213] = 0x3b, + [WM8996_WRITE_SEQUENCER_214] = 0x502, + [WM8996_WRITE_SEQUENCER_215] = 0x100, + [WM8996_WRITE_SEQUENCER_216] = 0x2fff, + [WM8996_WRITE_SEQUENCER_220] = 0x2fff, + [WM8996_WRITE_SEQUENCER_224] = 0x2fff, + [WM8996_WRITE_SEQUENCER_228] = 0x2fff, + [WM8996_WRITE_SEQUENCER_232] = 0x2fff, + [WM8996_WRITE_SEQUENCER_236] = 0x2fff, + [WM8996_WRITE_SEQUENCER_240] = 0x2fff, + [WM8996_WRITE_SEQUENCER_244] = 0x2fff, + [WM8996_WRITE_SEQUENCER_248] = 0x2fff, + [WM8996_WRITE_SEQUENCER_252] = 0x2fff, + [WM8996_WRITE_SEQUENCER_256] = 0x60, + [WM8996_WRITE_SEQUENCER_258] = 0x601, + [WM8996_WRITE_SEQUENCER_260] = 0x50, + [WM8996_WRITE_SEQUENCER_262] = 0x100, + [WM8996_WRITE_SEQUENCER_264] = 0x1, + [WM8996_WRITE_SEQUENCER_266] = 0x104, + [WM8996_WRITE_SEQUENCER_267] = 0x100, + [WM8996_WRITE_SEQUENCER_268] = 0x2fff, + [WM8996_WRITE_SEQUENCER_272] = 0x2fff, + [WM8996_WRITE_SEQUENCER_276] = 0x2fff, + [WM8996_WRITE_SEQUENCER_280] = 0x2fff, + [WM8996_WRITE_SEQUENCER_284] = 0x2fff, + [WM8996_WRITE_SEQUENCER_288] = 0x2fff, + [WM8996_WRITE_SEQUENCER_292] = 0x2fff, + [WM8996_WRITE_SEQUENCER_296] = 0x2fff, + [WM8996_WRITE_SEQUENCER_300] = 0x2fff, + [WM8996_WRITE_SEQUENCER_304] = 0x2fff, + [WM8996_WRITE_SEQUENCER_308] = 0x2fff, + [WM8996_WRITE_SEQUENCER_312] = 0x2fff, + [WM8996_WRITE_SEQUENCER_316] = 0x2fff, + [WM8996_WRITE_SEQUENCER_320] = 0x61, + [WM8996_WRITE_SEQUENCER_322] = 0x601, + [WM8996_WRITE_SEQUENCER_324] = 0x50, + [WM8996_WRITE_SEQUENCER_326] = 0x102, + [WM8996_WRITE_SEQUENCER_328] = 0x1, + [WM8996_WRITE_SEQUENCER_330] = 0x106, + [WM8996_WRITE_SEQUENCER_331] = 0x100, + [WM8996_WRITE_SEQUENCER_332] = 0x2fff, + [WM8996_WRITE_SEQUENCER_336] = 0x2fff, + [WM8996_WRITE_SEQUENCER_340] = 0x2fff, + [WM8996_WRITE_SEQUENCER_344] = 0x2fff, + [WM8996_WRITE_SEQUENCER_348] = 0x2fff, + [WM8996_WRITE_SEQUENCER_352] = 0x2fff, + [WM8996_WRITE_SEQUENCER_356] = 0x2fff, + [WM8996_WRITE_SEQUENCER_360] = 0x2fff, + [WM8996_WRITE_SEQUENCER_364] = 0x2fff, + [WM8996_WRITE_SEQUENCER_368] = 0x2fff, + [WM8996_WRITE_SEQUENCER_372] = 0x2fff, + [WM8996_WRITE_SEQUENCER_376] = 0x2fff, + [WM8996_WRITE_SEQUENCER_380] = 0x2fff, + [WM8996_WRITE_SEQUENCER_384] = 0x60, + [WM8996_WRITE_SEQUENCER_386] = 0x601, + [WM8996_WRITE_SEQUENCER_388] = 0x61, + [WM8996_WRITE_SEQUENCER_390] = 0x601, + [WM8996_WRITE_SEQUENCER_392] = 0x50, + [WM8996_WRITE_SEQUENCER_394] = 0x300, + [WM8996_WRITE_SEQUENCER_396] = 0x1, + [WM8996_WRITE_SEQUENCER_398] = 0x304, + [WM8996_WRITE_SEQUENCER_400] = 0x40, + [WM8996_WRITE_SEQUENCER_402] = 0xf, + [WM8996_WRITE_SEQUENCER_404] = 0x1, + [WM8996_WRITE_SEQUENCER_407] = 0x100, +}; + +static const DECLARE_TLV_DB_SCALE(inpga_tlv, 0, 100, 0); +static const DECLARE_TLV_DB_SCALE(sidetone_tlv, -3600, 150, 0); +static const DECLARE_TLV_DB_SCALE(digital_tlv, -7200, 75, 1); +static const DECLARE_TLV_DB_SCALE(out_digital_tlv, -1200, 150, 0); +static const DECLARE_TLV_DB_SCALE(out_tlv, -900, 75, 0); +static const DECLARE_TLV_DB_SCALE(spk_tlv, -900, 150, 0); +static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0); + +static const char *sidetone_hpf_text[] = { + "2.9kHz", "1.5kHz", "735Hz", "403Hz", "196Hz", "98Hz", "49Hz" +}; + +static const struct soc_enum sidetone_hpf = + SOC_ENUM_SINGLE(WM8996_SIDETONE, 7, 6, sidetone_hpf_text); + +static const char *hpf_mode_text[] = { + "HiFi", "Custom", "Voice" +}; + +static const struct soc_enum dsp1tx_hpf_mode = + SOC_ENUM_SINGLE(WM8996_DSP1_TX_FILTERS, 3, 3, hpf_mode_text); + +static const struct soc_enum dsp2tx_hpf_mode = + SOC_ENUM_SINGLE(WM8996_DSP2_TX_FILTERS, 3, 3, hpf_mode_text); + +static const char *hpf_cutoff_text[] = { + "50Hz", "75Hz", "100Hz", "150Hz", "200Hz", "300Hz", "400Hz" +}; + +static const struct soc_enum dsp1tx_hpf_cutoff = + SOC_ENUM_SINGLE(WM8996_DSP1_TX_FILTERS, 0, 7, hpf_cutoff_text); + +static const struct soc_enum dsp2tx_hpf_cutoff = + SOC_ENUM_SINGLE(WM8996_DSP2_TX_FILTERS, 0, 7, hpf_cutoff_text); + +static void wm8996_set_retune_mobile(struct snd_soc_codec *codec, int block) +{ + struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec); + struct wm8996_pdata *pdata = &wm8996->pdata; + int base, best, best_val, save, i, cfg, iface; + + if (!wm8996->num_retune_mobile_texts) + return; + + switch (block) { + case 0: + base = WM8996_DSP1_RX_EQ_GAINS_1; + if (snd_soc_read(codec, WM8996_POWER_MANAGEMENT_8) & + WM8996_DSP1RX_SRC) + iface = 1; + else + iface = 0; + break; + case 1: + base = WM8996_DSP1_RX_EQ_GAINS_2; + if (snd_soc_read(codec, WM8996_POWER_MANAGEMENT_8) & + WM8996_DSP2RX_SRC) + iface = 1; + else + iface = 0; + break; + default: + return; + } + + /* Find the version of the currently selected configuration + * with the nearest sample rate. */ + cfg = wm8996->retune_mobile_cfg[block]; + best = 0; + best_val = INT_MAX; + for (i = 0; i < pdata->num_retune_mobile_cfgs; i++) { + if (strcmp(pdata->retune_mobile_cfgs[i].name, + wm8996->retune_mobile_texts[cfg]) == 0 && + abs(pdata->retune_mobile_cfgs[i].rate + - wm8996->rx_rate[iface]) < best_val) { + best = i; + best_val = abs(pdata->retune_mobile_cfgs[i].rate + - wm8996->rx_rate[iface]); + } + } + + dev_dbg(codec->dev, "ReTune Mobile %d %s/%dHz for %dHz sample rate\n", + block, + pdata->retune_mobile_cfgs[best].name, + pdata->retune_mobile_cfgs[best].rate, + wm8996->rx_rate[iface]); + + /* The EQ will be disabled while reconfiguring it, remember the + * current configuration. + */ + save = snd_soc_read(codec, base); + save &= WM8996_DSP1RX_EQ_ENA; + + for (i = 0; i < ARRAY_SIZE(pdata->retune_mobile_cfgs[best].regs); i++) + snd_soc_update_bits(codec, base + i, 0xffff, + pdata->retune_mobile_cfgs[best].regs[i]); + + snd_soc_update_bits(codec, base, WM8996_DSP1RX_EQ_ENA, save); +} + +/* Icky as hell but saves code duplication */ +static int wm8996_get_retune_mobile_block(const char *name) +{ + if (strcmp(name, "DSP1 EQ Mode") == 0) + return 0; + if (strcmp(name, "DSP2 EQ Mode") == 0) + return 1; + return -EINVAL; +} + +static int wm8996_put_retune_mobile_enum(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec); + struct wm8996_pdata *pdata = &wm8996->pdata; + int block = wm8996_get_retune_mobile_block(kcontrol->id.name); + int value = ucontrol->value.integer.value[0]; + + if (block < 0) + return block; + + if (value >= pdata->num_retune_mobile_cfgs) + return -EINVAL; + + wm8996->retune_mobile_cfg[block] = value; + + wm8996_set_retune_mobile(codec, block); + + return 0; +} + +static int wm8996_get_retune_mobile_enum(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec); + int block = wm8996_get_retune_mobile_block(kcontrol->id.name); + + ucontrol->value.enumerated.item[0] = wm8996->retune_mobile_cfg[block]; + + return 0; +} + +static const struct snd_kcontrol_new wm8996_snd_controls[] = { +SOC_DOUBLE_R_TLV("Capture Volume", WM8996_LEFT_LINE_INPUT_VOLUME, + WM8996_RIGHT_LINE_INPUT_VOLUME, 0, 31, 0, inpga_tlv), +SOC_DOUBLE_R("Capture ZC Switch", WM8996_LEFT_LINE_INPUT_VOLUME, + WM8996_RIGHT_LINE_INPUT_VOLUME, 5, 1, 0), + +SOC_DOUBLE_TLV("DAC1 Sidetone Volume", WM8996_DAC1_MIXER_VOLUMES, + 0, 5, 24, 0, sidetone_tlv), +SOC_DOUBLE_TLV("DAC2 Sidetone Volume", WM8996_DAC2_MIXER_VOLUMES, + 0, 5, 24, 0, sidetone_tlv), +SOC_SINGLE("Sidetone LPF Switch", WM8996_SIDETONE, 12, 1, 0), +SOC_ENUM("Sidetone HPF Cut-off", sidetone_hpf), +SOC_SINGLE("Sidetone HPF Switch", WM8996_SIDETONE, 6, 1, 0), + +SOC_DOUBLE_R_TLV("DSP1 Capture Volume", WM8996_DSP1_TX_LEFT_VOLUME, + WM8996_DSP1_TX_RIGHT_VOLUME, 1, 96, 0, digital_tlv), +SOC_DOUBLE_R_TLV("DSP2 Capture Volume", WM8996_DSP2_TX_LEFT_VOLUME, + WM8996_DSP2_TX_RIGHT_VOLUME, 1, 96, 0, digital_tlv), + +SOC_SINGLE("DSP1 Capture Notch Filter Switch", WM8996_DSP1_TX_FILTERS, + 13, 1, 0), +SOC_DOUBLE("DSP1 Capture HPF Switch", WM8996_DSP1_TX_FILTERS, 12, 11, 1, 0), +SOC_ENUM("DSP1 Capture HPF Mode", dsp1tx_hpf_mode), +SOC_ENUM("DSP1 Capture HPF Cutoff", dsp1tx_hpf_cutoff), + +SOC_SINGLE("DSP2 Capture Notch Filter Switch", WM8996_DSP2_TX_FILTERS, + 13, 1, 0), +SOC_DOUBLE("DSP2 Capture HPF Switch", WM8996_DSP2_TX_FILTERS, 12, 11, 1, 0), +SOC_ENUM("DSP2 Capture HPF Mode", dsp2tx_hpf_mode), +SOC_ENUM("DSP2 Capture HPF Cutoff", dsp2tx_hpf_cutoff), + +SOC_DOUBLE_R_TLV("DSP1 Playback Volume", WM8996_DSP1_RX_LEFT_VOLUME, + WM8996_DSP1_RX_RIGHT_VOLUME, 1, 112, 0, digital_tlv), +SOC_SINGLE("DSP1 Playback Switch", WM8996_DSP1_RX_FILTERS_1, 9, 1, 1), + +SOC_DOUBLE_R_TLV("DSP2 Playback Volume", WM8996_DSP2_RX_LEFT_VOLUME, + WM8996_DSP2_RX_RIGHT_VOLUME, 1, 112, 0, digital_tlv), +SOC_SINGLE("DSP2 Playback Switch", WM8996_DSP2_RX_FILTERS_1, 9, 1, 1), + +SOC_DOUBLE_R_TLV("DAC1 Volume", WM8996_DAC1_LEFT_VOLUME, + WM8996_DAC1_RIGHT_VOLUME, 1, 112, 0, digital_tlv), +SOC_DOUBLE_R("DAC1 Switch", WM8996_DAC1_LEFT_VOLUME, + WM8996_DAC1_RIGHT_VOLUME, 9, 1, 1), + +SOC_DOUBLE_R_TLV("DAC2 Volume", WM8996_DAC2_LEFT_VOLUME, + WM8996_DAC2_RIGHT_VOLUME, 1, 112, 0, digital_tlv), +SOC_DOUBLE_R("DAC2 Switch", WM8996_DAC2_LEFT_VOLUME, + WM8996_DAC2_RIGHT_VOLUME, 9, 1, 1), + +SOC_SINGLE("Speaker High Performance Switch", WM8996_OVERSAMPLING, 3, 1, 0), +SOC_SINGLE("DMIC High Performance Switch", WM8996_OVERSAMPLING, 2, 1, 0), +SOC_SINGLE("ADC High Performance Switch", WM8996_OVERSAMPLING, 1, 1, 0), +SOC_SINGLE("DAC High Performance Switch", WM8996_OVERSAMPLING, 0, 1, 0), + +SOC_SINGLE("DAC Soft Mute Switch", WM8996_DAC_SOFTMUTE, 1, 1, 0), +SOC_SINGLE("DAC Slow Soft Mute Switch", WM8996_DAC_SOFTMUTE, 0, 1, 0), + +SOC_DOUBLE_TLV("Digital Output 1 Volume", WM8996_DAC1_HPOUT1_VOLUME, 0, 4, + 8, 0, out_digital_tlv), +SOC_DOUBLE_TLV("Digital Output 2 Volume", WM8996_DAC2_HPOUT2_VOLUME, 0, 4, + 8, 0, out_digital_tlv), + +SOC_DOUBLE_R_TLV("Output 1 Volume", WM8996_OUTPUT1_LEFT_VOLUME, + WM8996_OUTPUT1_RIGHT_VOLUME, 0, 12, 0, out_tlv), +SOC_DOUBLE_R("Output 1 ZC Switch", WM8996_OUTPUT1_LEFT_VOLUME, + WM8996_OUTPUT1_RIGHT_VOLUME, 7, 1, 0), + +SOC_DOUBLE_R_TLV("Output 2 Volume", WM8996_OUTPUT2_LEFT_VOLUME, + WM8996_OUTPUT2_RIGHT_VOLUME, 0, 12, 0, out_tlv), +SOC_DOUBLE_R("Output 2 ZC Switch", WM8996_OUTPUT2_LEFT_VOLUME, + WM8996_OUTPUT2_RIGHT_VOLUME, 7, 1, 0), + +SOC_DOUBLE_TLV("Speaker Volume", WM8996_PDM_SPEAKER_VOLUME, 0, 4, 8, 0, + spk_tlv), +SOC_DOUBLE_R("Speaker Switch", WM8996_LEFT_PDM_SPEAKER, + WM8996_RIGHT_PDM_SPEAKER, 3, 1, 1), +SOC_DOUBLE_R("Speaker ZC Switch", WM8996_LEFT_PDM_SPEAKER, + WM8996_RIGHT_PDM_SPEAKER, 2, 1, 0), + +SOC_SINGLE("DSP1 EQ Switch", WM8996_DSP1_RX_EQ_GAINS_1, 0, 1, 0), +SOC_SINGLE("DSP2 EQ Switch", WM8996_DSP2_RX_EQ_GAINS_1, 0, 1, 0), +}; + +static const struct snd_kcontrol_new wm8996_eq_controls[] = { +SOC_SINGLE_TLV("DSP1 EQ B1 Volume", WM8996_DSP1_RX_EQ_GAINS_1, 11, 31, 0, + eq_tlv), +SOC_SINGLE_TLV("DSP1 EQ B2 Volume", WM8996_DSP1_RX_EQ_GAINS_1, 6, 31, 0, + eq_tlv), +SOC_SINGLE_TLV("DSP1 EQ B3 Volume", WM8996_DSP1_RX_EQ_GAINS_1, 1, 31, 0, + eq_tlv), +SOC_SINGLE_TLV("DSP1 EQ B4 Volume", WM8996_DSP1_RX_EQ_GAINS_2, 11, 31, 0, + eq_tlv), +SOC_SINGLE_TLV("DSP1 EQ B5 Volume", WM8996_DSP1_RX_EQ_GAINS_2, 6, 31, 0, + eq_tlv), + +SOC_SINGLE_TLV("DSP2 EQ B1 Volume", WM8996_DSP2_RX_EQ_GAINS_1, 11, 31, 0, + eq_tlv), +SOC_SINGLE_TLV("DSP2 EQ B2 Volume", WM8996_DSP2_RX_EQ_GAINS_1, 6, 31, 0, + eq_tlv), +SOC_SINGLE_TLV("DSP2 EQ B3 Volume", WM8996_DSP2_RX_EQ_GAINS_1, 1, 31, 0, + eq_tlv), +SOC_SINGLE_TLV("DSP2 EQ B4 Volume", WM8996_DSP2_RX_EQ_GAINS_2, 11, 31, 0, + eq_tlv), +SOC_SINGLE_TLV("DSP2 EQ B5 Volume", WM8996_DSP2_RX_EQ_GAINS_2, 6, 31, 0, + eq_tlv), +}; + +static int cp_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + switch (event) { + case SND_SOC_DAPM_POST_PMU: + msleep(5); + break; + default: + BUG(); + return -EINVAL; + } + + return 0; +} + +static int rmv_short_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(w->codec); + + /* Record which outputs we enabled */ + switch (event) { + case SND_SOC_DAPM_PRE_PMD: + wm8996->hpout_pending &= ~w->shift; + break; + case SND_SOC_DAPM_PRE_PMU: + wm8996->hpout_pending |= w->shift; + break; + default: + BUG(); + return -EINVAL; + } + + return 0; +} + +static void wait_for_dc_servo(struct snd_soc_codec *codec, u16 mask) +{ + struct i2c_client *i2c = to_i2c_client(codec->dev); + struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec); + int i, ret; + unsigned long timeout = 200; + + snd_soc_write(codec, WM8996_DC_SERVO_2, mask); + + /* Use the interrupt if possible */ + do { + if (i2c->irq) { + timeout = wait_for_completion_timeout(&wm8996->dcs_done, + msecs_to_jiffies(200)); + if (timeout == 0) + dev_err(codec->dev, "DC servo timed out\n"); + + } else { + msleep(1); + if (--i) { + timeout = 0; + break; + } + } + + ret = snd_soc_read(codec, WM8996_DC_SERVO_2); + dev_dbg(codec->dev, "DC servo state: %x\n", ret); + } while (ret & mask); + + if (timeout == 0) + dev_err(codec->dev, "DC servo timed out for %x\n", mask); + else + dev_dbg(codec->dev, "DC servo complete for %x\n", mask); +} + +static void wm8996_seq_notifier(struct snd_soc_dapm_context *dapm, + enum snd_soc_dapm_type event, int subseq) +{ + struct snd_soc_codec *codec = container_of(dapm, + struct snd_soc_codec, dapm); + struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec); + u16 val, mask; + + /* Complete any pending DC servo starts */ + if (wm8996->dcs_pending) { + dev_dbg(codec->dev, "Starting DC servo for %x\n", + wm8996->dcs_pending); + + /* Trigger a startup sequence */ + wait_for_dc_servo(codec, wm8996->dcs_pending + << WM8996_DCS_TRIG_STARTUP_0_SHIFT); + + wm8996->dcs_pending = 0; + } + + if (wm8996->hpout_pending != wm8996->hpout_ena) { + dev_dbg(codec->dev, "Applying RMV_SHORTs %x->%x\n", + wm8996->hpout_ena, wm8996->hpout_pending); + + val = 0; + mask = 0; + if (wm8996->hpout_pending & HPOUT1L) { + val |= WM8996_HPOUT1L_RMV_SHORT; + mask |= WM8996_HPOUT1L_RMV_SHORT; + } else { + mask |= WM8996_HPOUT1L_RMV_SHORT | + WM8996_HPOUT1L_OUTP | + WM8996_HPOUT1L_DLY; + } + + if (wm8996->hpout_pending & HPOUT1R) { + val |= WM8996_HPOUT1R_RMV_SHORT; + mask |= WM8996_HPOUT1R_RMV_SHORT; + } else { + mask |= WM8996_HPOUT1R_RMV_SHORT | + WM8996_HPOUT1R_OUTP | + WM8996_HPOUT1R_DLY; + } + + snd_soc_update_bits(codec, WM8996_ANALOGUE_HP_1, mask, val); + + val = 0; + mask = 0; + if (wm8996->hpout_pending & HPOUT2L) { + val |= WM8996_HPOUT2L_RMV_SHORT; + mask |= WM8996_HPOUT2L_RMV_SHORT; + } else { + mask |= WM8996_HPOUT2L_RMV_SHORT | + WM8996_HPOUT2L_OUTP | + WM8996_HPOUT2L_DLY; + } + + if (wm8996->hpout_pending & HPOUT2R) { + val |= WM8996_HPOUT2R_RMV_SHORT; + mask |= WM8996_HPOUT2R_RMV_SHORT; + } else { + mask |= WM8996_HPOUT2R_RMV_SHORT | + WM8996_HPOUT2R_OUTP | + WM8996_HPOUT2R_DLY; + } + + snd_soc_update_bits(codec, WM8996_ANALOGUE_HP_2, mask, val); + + wm8996->hpout_ena = wm8996->hpout_pending; + } +} + +static int dcs_start(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(w->codec); + + switch (event) { + case SND_SOC_DAPM_POST_PMU: + wm8996->dcs_pending |= 1 << w->shift; + break; + default: + BUG(); + return -EINVAL; + } + + return 0; +} + +static const char *sidetone_text[] = { + "IN1", "IN2", +}; + +static const struct soc_enum left_sidetone_enum = + SOC_ENUM_SINGLE(WM8996_SIDETONE, 0, 2, sidetone_text); + +static const struct snd_kcontrol_new left_sidetone = + SOC_DAPM_ENUM("Left Sidetone", left_sidetone_enum); + +static const struct soc_enum right_sidetone_enum = + SOC_ENUM_SINGLE(WM8996_SIDETONE, 1, 2, sidetone_text); + +static const struct snd_kcontrol_new right_sidetone = + SOC_DAPM_ENUM("Right Sidetone", right_sidetone_enum); + +static const char *spk_text[] = { + "DAC1L", "DAC1R", "DAC2L", "DAC2R" +}; + +static const struct soc_enum spkl_enum = + SOC_ENUM_SINGLE(WM8996_LEFT_PDM_SPEAKER, 0, 4, spk_text); + +static const struct snd_kcontrol_new spkl_mux = + SOC_DAPM_ENUM("SPKL", spkl_enum); + +static const struct soc_enum spkr_enum = + SOC_ENUM_SINGLE(WM8996_RIGHT_PDM_SPEAKER, 0, 4, spk_text); + +static const struct snd_kcontrol_new spkr_mux = + SOC_DAPM_ENUM("SPKR", spkr_enum); + +static const char *dsp1rx_text[] = { + "AIF1", "AIF2" +}; + +static const struct soc_enum dsp1rx_enum = + SOC_ENUM_SINGLE(WM8996_POWER_MANAGEMENT_8, 0, 2, dsp1rx_text); + +static const struct snd_kcontrol_new dsp1rx = + SOC_DAPM_ENUM("DSP1RX", dsp1rx_enum); + +static const char *dsp2rx_text[] = { + "AIF2", "AIF1" +}; + +static const struct soc_enum dsp2rx_enum = + SOC_ENUM_SINGLE(WM8996_POWER_MANAGEMENT_8, 4, 2, dsp2rx_text); + +static const struct snd_kcontrol_new dsp2rx = + SOC_DAPM_ENUM("DSP2RX", dsp2rx_enum); + +static const char *aif2tx_text[] = { + "DSP2", "DSP1", "AIF1" +}; + +static const struct soc_enum aif2tx_enum = + SOC_ENUM_SINGLE(WM8996_POWER_MANAGEMENT_8, 6, 3, aif2tx_text); + +static const struct snd_kcontrol_new aif2tx = + SOC_DAPM_ENUM("AIF2TX", aif2tx_enum); + +static const char *inmux_text[] = { + "ADC", "DMIC1", "DMIC2" +}; + +static const struct soc_enum in1_enum = + SOC_ENUM_SINGLE(WM8996_POWER_MANAGEMENT_7, 0, 3, inmux_text); + +static const struct snd_kcontrol_new in1_mux = + SOC_DAPM_ENUM("IN1 Mux", in1_enum); + +static const struct soc_enum in2_enum = + SOC_ENUM_SINGLE(WM8996_POWER_MANAGEMENT_7, 4, 3, inmux_text); + +static const struct snd_kcontrol_new in2_mux = + SOC_DAPM_ENUM("IN2 Mux", in2_enum); + +static const struct snd_kcontrol_new dac2r_mix[] = { +SOC_DAPM_SINGLE("Right Sidetone Switch", WM8996_DAC2_RIGHT_MIXER_ROUTING, + 5, 1, 0), +SOC_DAPM_SINGLE("Left Sidetone Switch", WM8996_DAC2_RIGHT_MIXER_ROUTING, + 4, 1, 0), +SOC_DAPM_SINGLE("DSP2 Switch", WM8996_DAC2_RIGHT_MIXER_ROUTING, 1, 1, 0), +SOC_DAPM_SINGLE("DSP1 Switch", WM8996_DAC2_RIGHT_MIXER_ROUTING, 0, 1, 0), +}; + +static const struct snd_kcontrol_new dac2l_mix[] = { +SOC_DAPM_SINGLE("Right Sidetone Switch", WM8996_DAC2_LEFT_MIXER_ROUTING, + 5, 1, 0), +SOC_DAPM_SINGLE("Left Sidetone Switch", WM8996_DAC2_LEFT_MIXER_ROUTING, + 4, 1, 0), +SOC_DAPM_SINGLE("DSP2 Switch", WM8996_DAC2_LEFT_MIXER_ROUTING, 1, 1, 0), +SOC_DAPM_SINGLE("DSP1 Switch", WM8996_DAC2_LEFT_MIXER_ROUTING, 0, 1, 0), +}; + +static const struct snd_kcontrol_new dac1r_mix[] = { +SOC_DAPM_SINGLE("Right Sidetone Switch", WM8996_DAC1_RIGHT_MIXER_ROUTING, + 5, 1, 0), +SOC_DAPM_SINGLE("Left Sidetone Switch", WM8996_DAC1_RIGHT_MIXER_ROUTING, + 4, 1, 0), +SOC_DAPM_SINGLE("DSP2 Switch", WM8996_DAC1_RIGHT_MIXER_ROUTING, 1, 1, 0), +SOC_DAPM_SINGLE("DSP1 Switch", WM8996_DAC1_RIGHT_MIXER_ROUTING, 0, 1, 0), +}; + +static const struct snd_kcontrol_new dac1l_mix[] = { +SOC_DAPM_SINGLE("Right Sidetone Switch", WM8996_DAC1_LEFT_MIXER_ROUTING, + 5, 1, 0), +SOC_DAPM_SINGLE("Left Sidetone Switch", WM8996_DAC1_LEFT_MIXER_ROUTING, + 4, 1, 0), +SOC_DAPM_SINGLE("DSP2 Switch", WM8996_DAC1_LEFT_MIXER_ROUTING, 1, 1, 0), +SOC_DAPM_SINGLE("DSP1 Switch", WM8996_DAC1_LEFT_MIXER_ROUTING, 0, 1, 0), +}; + +static const struct snd_kcontrol_new dsp1txl[] = { +SOC_DAPM_SINGLE("IN1 Switch", WM8996_DSP1_TX_LEFT_MIXER_ROUTING, + 1, 1, 0), +SOC_DAPM_SINGLE("DAC Switch", WM8996_DSP1_TX_LEFT_MIXER_ROUTING, + 0, 1, 0), +}; + +static const struct snd_kcontrol_new dsp1txr[] = { +SOC_DAPM_SINGLE("IN1 Switch", WM8996_DSP1_TX_RIGHT_MIXER_ROUTING, + 1, 1, 0), +SOC_DAPM_SINGLE("DAC Switch", WM8996_DSP1_TX_RIGHT_MIXER_ROUTING, + 0, 1, 0), +}; + +static const struct snd_kcontrol_new dsp2txl[] = { +SOC_DAPM_SINGLE("IN1 Switch", WM8996_DSP2_TX_LEFT_MIXER_ROUTING, + 1, 1, 0), +SOC_DAPM_SINGLE("DAC Switch", WM8996_DSP2_TX_LEFT_MIXER_ROUTING, + 0, 1, 0), +}; + +static const struct snd_kcontrol_new dsp2txr[] = { +SOC_DAPM_SINGLE("IN1 Switch", WM8996_DSP2_TX_RIGHT_MIXER_ROUTING, + 1, 1, 0), +SOC_DAPM_SINGLE("DAC Switch", WM8996_DSP2_TX_RIGHT_MIXER_ROUTING, + 0, 1, 0), +}; + + +static const struct snd_soc_dapm_widget wm8996_dapm_widgets[] = { +SND_SOC_DAPM_INPUT("IN1LN"), +SND_SOC_DAPM_INPUT("IN1LP"), +SND_SOC_DAPM_INPUT("IN1RN"), +SND_SOC_DAPM_INPUT("IN1RP"), + +SND_SOC_DAPM_INPUT("IN2LN"), +SND_SOC_DAPM_INPUT("IN2LP"), +SND_SOC_DAPM_INPUT("IN2RN"), +SND_SOC_DAPM_INPUT("IN2RP"), + +SND_SOC_DAPM_INPUT("DMIC1DAT"), +SND_SOC_DAPM_INPUT("DMIC2DAT"), + +SND_SOC_DAPM_SUPPLY_S("SYSCLK", 1, WM8996_AIF_CLOCKING_1, 0, 0, NULL, 0), +SND_SOC_DAPM_SUPPLY_S("SYSDSPCLK", 2, WM8996_CLOCKING_1, 1, 0, NULL, 0), +SND_SOC_DAPM_SUPPLY_S("AIFCLK", 2, WM8996_CLOCKING_1, 2, 0, NULL, 0), +SND_SOC_DAPM_SUPPLY_S("Charge Pump", 2, WM8996_CHARGE_PUMP_1, 15, 0, cp_event, + SND_SOC_DAPM_POST_PMU), + +SND_SOC_DAPM_SUPPLY("LDO2", WM8996_POWER_MANAGEMENT_2, 1, 0, NULL, 0), +SND_SOC_DAPM_MICBIAS("MICB2", WM8996_POWER_MANAGEMENT_1, 9, 0), +SND_SOC_DAPM_MICBIAS("MICB1", WM8996_POWER_MANAGEMENT_1, 8, 0), + +SND_SOC_DAPM_PGA("IN1L PGA", WM8996_POWER_MANAGEMENT_2, 5, 0, NULL, 0), +SND_SOC_DAPM_PGA("IN1R PGA", WM8996_POWER_MANAGEMENT_2, 4, 0, NULL, 0), + +SND_SOC_DAPM_MUX("IN1L Mux", SND_SOC_NOPM, 0, 0, &in1_mux), +SND_SOC_DAPM_MUX("IN1R Mux", SND_SOC_NOPM, 0, 0, &in1_mux), +SND_SOC_DAPM_MUX("IN2L Mux", SND_SOC_NOPM, 0, 0, &in2_mux), +SND_SOC_DAPM_MUX("IN2R Mux", SND_SOC_NOPM, 0, 0, &in2_mux), + +SND_SOC_DAPM_PGA("IN1L", WM8996_POWER_MANAGEMENT_7, 2, 0, NULL, 0), +SND_SOC_DAPM_PGA("IN1R", WM8996_POWER_MANAGEMENT_7, 3, 0, NULL, 0), +SND_SOC_DAPM_PGA("IN2L", WM8996_POWER_MANAGEMENT_7, 6, 0, NULL, 0), +SND_SOC_DAPM_PGA("IN2R", WM8996_POWER_MANAGEMENT_7, 7, 0, NULL, 0), + +SND_SOC_DAPM_SUPPLY("DMIC2", WM8996_POWER_MANAGEMENT_7, 9, 0, NULL, 0), +SND_SOC_DAPM_SUPPLY("DMIC1", WM8996_POWER_MANAGEMENT_7, 8, 0, NULL, 0), + +SND_SOC_DAPM_ADC("DMIC2L", NULL, WM8996_POWER_MANAGEMENT_3, 5, 0), +SND_SOC_DAPM_ADC("DMIC2R", NULL, WM8996_POWER_MANAGEMENT_3, 4, 0), +SND_SOC_DAPM_ADC("DMIC1L", NULL, WM8996_POWER_MANAGEMENT_3, 3, 0), +SND_SOC_DAPM_ADC("DMIC1R", NULL, WM8996_POWER_MANAGEMENT_3, 2, 0), + +SND_SOC_DAPM_ADC("ADCL", NULL, WM8996_POWER_MANAGEMENT_3, 1, 0), +SND_SOC_DAPM_ADC("ADCR", NULL, WM8996_POWER_MANAGEMENT_3, 0, 0), + +SND_SOC_DAPM_MUX("Left Sidetone", SND_SOC_NOPM, 0, 0, &left_sidetone), +SND_SOC_DAPM_MUX("Right Sidetone", SND_SOC_NOPM, 0, 0, &right_sidetone), + +SND_SOC_DAPM_AIF_IN("DSP2RXL", NULL, 0, WM8996_POWER_MANAGEMENT_3, 11, 0), +SND_SOC_DAPM_AIF_IN("DSP2RXR", NULL, 1, WM8996_POWER_MANAGEMENT_3, 10, 0), +SND_SOC_DAPM_AIF_IN("DSP1RXL", NULL, 0, WM8996_POWER_MANAGEMENT_3, 9, 0), +SND_SOC_DAPM_AIF_IN("DSP1RXR", NULL, 1, WM8996_POWER_MANAGEMENT_3, 8, 0), + +SND_SOC_DAPM_MIXER("DSP2TXL", WM8996_POWER_MANAGEMENT_5, 11, 0, + dsp2txl, ARRAY_SIZE(dsp2txl)), +SND_SOC_DAPM_MIXER("DSP2TXR", WM8996_POWER_MANAGEMENT_5, 10, 0, + dsp2txr, ARRAY_SIZE(dsp2txr)), +SND_SOC_DAPM_MIXER("DSP1TXL", WM8996_POWER_MANAGEMENT_5, 9, 0, + dsp1txl, ARRAY_SIZE(dsp1txl)), +SND_SOC_DAPM_MIXER("DSP1TXR", WM8996_POWER_MANAGEMENT_5, 8, 0, + dsp1txr, ARRAY_SIZE(dsp1txr)), + +SND_SOC_DAPM_MIXER("DAC2L Mixer", SND_SOC_NOPM, 0, 0, + dac2l_mix, ARRAY_SIZE(dac2l_mix)), +SND_SOC_DAPM_MIXER("DAC2R Mixer", SND_SOC_NOPM, 0, 0, + dac2r_mix, ARRAY_SIZE(dac2r_mix)), +SND_SOC_DAPM_MIXER("DAC1L Mixer", SND_SOC_NOPM, 0, 0, + dac1l_mix, ARRAY_SIZE(dac1l_mix)), +SND_SOC_DAPM_MIXER("DAC1R Mixer", SND_SOC_NOPM, 0, 0, + dac1r_mix, ARRAY_SIZE(dac1r_mix)), + +SND_SOC_DAPM_DAC("DAC2L", NULL, WM8996_POWER_MANAGEMENT_5, 3, 0), +SND_SOC_DAPM_DAC("DAC2R", NULL, WM8996_POWER_MANAGEMENT_5, 2, 0), +SND_SOC_DAPM_DAC("DAC1L", NULL, WM8996_POWER_MANAGEMENT_5, 1, 0), +SND_SOC_DAPM_DAC("DAC1R", NULL, WM8996_POWER_MANAGEMENT_5, 0, 0), + +SND_SOC_DAPM_AIF_IN("AIF2RX1", "AIF2 Playback", 1, + WM8996_POWER_MANAGEMENT_4, 9, 0), +SND_SOC_DAPM_AIF_IN("AIF2RX0", "AIF2 Playback", 2, + WM8996_POWER_MANAGEMENT_4, 8, 0), + +SND_SOC_DAPM_AIF_IN("AIF2TX1", "AIF2 Capture", 1, + WM8996_POWER_MANAGEMENT_6, 9, 0), +SND_SOC_DAPM_AIF_IN("AIF2TX0", "AIF2 Capture", 2, + WM8996_POWER_MANAGEMENT_6, 8, 0), + +SND_SOC_DAPM_AIF_IN("AIF1RX5", "AIF1 Playback", 5, + WM8996_POWER_MANAGEMENT_4, 5, 0), +SND_SOC_DAPM_AIF_IN("AIF1RX4", "AIF1 Playback", 4, + WM8996_POWER_MANAGEMENT_4, 4, 0), +SND_SOC_DAPM_AIF_IN("AIF1RX3", "AIF1 Playback", 3, + WM8996_POWER_MANAGEMENT_4, 3, 0), +SND_SOC_DAPM_AIF_IN("AIF1RX2", "AIF1 Playback", 2, + WM8996_POWER_MANAGEMENT_4, 2, 0), +SND_SOC_DAPM_AIF_IN("AIF1RX1", "AIF1 Playback", 1, + WM8996_POWER_MANAGEMENT_4, 1, 0), +SND_SOC_DAPM_AIF_IN("AIF1RX0", "AIF1 Playback", 0, + WM8996_POWER_MANAGEMENT_4, 0, 0), + +SND_SOC_DAPM_AIF_OUT("AIF1TX5", "AIF1 Capture", 5, + WM8996_POWER_MANAGEMENT_6, 5, 0), +SND_SOC_DAPM_AIF_OUT("AIF1TX4", "AIF1 Capture", 4, + WM8996_POWER_MANAGEMENT_6, 4, 0), +SND_SOC_DAPM_AIF_OUT("AIF1TX3", "AIF1 Capture", 3, + WM8996_POWER_MANAGEMENT_6, 3, 0), +SND_SOC_DAPM_AIF_OUT("AIF1TX2", "AIF1 Capture", 2, + WM8996_POWER_MANAGEMENT_6, 2, 0), +SND_SOC_DAPM_AIF_OUT("AIF1TX1", "AIF1 Capture", 1, + WM8996_POWER_MANAGEMENT_6, 1, 0), +SND_SOC_DAPM_AIF_OUT("AIF1TX0", "AIF1 Capture", 0, + WM8996_POWER_MANAGEMENT_6, 0, 0), + +/* We route as stereo pairs so define some dummy widgets to squash + * things down for now. RXA = 0,1, RXB = 2,3 and so on */ +SND_SOC_DAPM_PGA("AIF1RXA", SND_SOC_NOPM, 0, 0, NULL, 0), +SND_SOC_DAPM_PGA("AIF1RXB", SND_SOC_NOPM, 0, 0, NULL, 0), +SND_SOC_DAPM_PGA("AIF1RXC", SND_SOC_NOPM, 0, 0, NULL, 0), +SND_SOC_DAPM_PGA("AIF2RX", SND_SOC_NOPM, 0, 0, NULL, 0), +SND_SOC_DAPM_PGA("DSP2TX", SND_SOC_NOPM, 0, 0, NULL, 0), + +SND_SOC_DAPM_MUX("DSP1RX", SND_SOC_NOPM, 0, 0, &dsp1rx), +SND_SOC_DAPM_MUX("DSP2RX", SND_SOC_NOPM, 0, 0, &dsp2rx), +SND_SOC_DAPM_MUX("AIF2TX", SND_SOC_NOPM, 0, 0, &aif2tx), + +SND_SOC_DAPM_MUX("SPKL", SND_SOC_NOPM, 0, 0, &spkl_mux), +SND_SOC_DAPM_MUX("SPKR", SND_SOC_NOPM, 0, 0, &spkr_mux), +SND_SOC_DAPM_PGA("SPKL PGA", WM8996_LEFT_PDM_SPEAKER, 4, 0, NULL, 0), +SND_SOC_DAPM_PGA("SPKR PGA", WM8996_RIGHT_PDM_SPEAKER, 4, 0, NULL, 0), + +SND_SOC_DAPM_PGA_S("HPOUT2L PGA", 0, WM8996_POWER_MANAGEMENT_1, 7, 0, NULL, 0), +SND_SOC_DAPM_PGA_S("HPOUT2L_DLY", 1, WM8996_ANALOGUE_HP_2, 5, 0, NULL, 0), +SND_SOC_DAPM_PGA_S("HPOUT2L_DCS", 2, WM8996_DC_SERVO_1, 2, 0, dcs_start, + SND_SOC_DAPM_POST_PMU), +SND_SOC_DAPM_PGA_S("HPOUT2L_OUTP", 3, WM8996_ANALOGUE_HP_2, 6, 0, NULL, 0), +SND_SOC_DAPM_PGA_S("HPOUT2L_RMV_SHORT", 3, SND_SOC_NOPM, HPOUT2L, 0, + rmv_short_event, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD), + +SND_SOC_DAPM_PGA_S("HPOUT2R PGA", 0, WM8996_POWER_MANAGEMENT_1, 6, 0,NULL, 0), +SND_SOC_DAPM_PGA_S("HPOUT2R_DLY", 1, WM8996_ANALOGUE_HP_2, 1, 0, NULL, 0), +SND_SOC_DAPM_PGA_S("HPOUT2R_DCS", 2, WM8996_DC_SERVO_1, 3, 0, dcs_start, + SND_SOC_DAPM_POST_PMU), +SND_SOC_DAPM_PGA_S("HPOUT2R_OUTP", 3, WM8996_ANALOGUE_HP_2, 2, 0, NULL, 0), +SND_SOC_DAPM_PGA_S("HPOUT2R_RMV_SHORT", 3, SND_SOC_NOPM, HPOUT2R, 0, + rmv_short_event, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD), + +SND_SOC_DAPM_PGA_S("HPOUT1L PGA", 0, WM8996_POWER_MANAGEMENT_1, 5, 0, NULL, 0), +SND_SOC_DAPM_PGA_S("HPOUT1L_DLY", 1, WM8996_ANALOGUE_HP_1, 5, 0, NULL, 0), +SND_SOC_DAPM_PGA_S("HPOUT1L_DCS", 2, WM8996_DC_SERVO_1, 0, 0, dcs_start, + SND_SOC_DAPM_POST_PMU), +SND_SOC_DAPM_PGA_S("HPOUT1L_OUTP", 3, WM8996_ANALOGUE_HP_1, 6, 0, NULL, 0), +SND_SOC_DAPM_PGA_S("HPOUT1L_RMV_SHORT", 3, SND_SOC_NOPM, HPOUT1L, 0, + rmv_short_event, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD), + +SND_SOC_DAPM_PGA_S("HPOUT1R PGA", 0, WM8996_POWER_MANAGEMENT_1, 4, 0, NULL, 0), +SND_SOC_DAPM_PGA_S("HPOUT1R_DLY", 1, WM8996_ANALOGUE_HP_1, 1, 0, NULL, 0), +SND_SOC_DAPM_PGA_S("HPOUT1R_DCS", 2, WM8996_DC_SERVO_1, 1, 0, dcs_start, + SND_SOC_DAPM_POST_PMU), +SND_SOC_DAPM_PGA_S("HPOUT1R_OUTP", 3, WM8996_ANALOGUE_HP_1, 2, 0, NULL, 0), +SND_SOC_DAPM_PGA_S("HPOUT1R_RMV_SHORT", 3, SND_SOC_NOPM, HPOUT1R, 0, + rmv_short_event, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD), + +SND_SOC_DAPM_OUTPUT("HPOUT1L"), +SND_SOC_DAPM_OUTPUT("HPOUT1R"), +SND_SOC_DAPM_OUTPUT("HPOUT2L"), +SND_SOC_DAPM_OUTPUT("HPOUT2R"), +SND_SOC_DAPM_OUTPUT("SPKDAT"), +}; + +static const struct snd_soc_dapm_route wm8996_dapm_routes[] = { + { "AIFCLK", NULL, "SYSCLK" }, + { "SYSDSPCLK", NULL, "SYSCLK" }, + { "Charge Pump", NULL, "SYSCLK" }, + + { "MICB1", NULL, "LDO2" }, + { "MICB2", NULL, "LDO2" }, + + { "IN1L PGA", NULL, "IN2LN" }, + { "IN1L PGA", NULL, "IN2LP" }, + { "IN1L PGA", NULL, "IN1LN" }, + { "IN1L PGA", NULL, "IN1LP" }, + + { "IN1R PGA", NULL, "IN2RN" }, + { "IN1R PGA", NULL, "IN2RP" }, + { "IN1R PGA", NULL, "IN1RN" }, + { "IN1R PGA", NULL, "IN1RP" }, + + { "ADCL", NULL, "IN1L PGA" }, + + { "ADCR", NULL, "IN1R PGA" }, + + { "DMIC1L", NULL, "DMIC1DAT" }, + { "DMIC1R", NULL, "DMIC1DAT" }, + { "DMIC2L", NULL, "DMIC2DAT" }, + { "DMIC2R", NULL, "DMIC2DAT" }, + + { "DMIC2L", NULL, "DMIC2" }, + { "DMIC2R", NULL, "DMIC2" }, + { "DMIC1L", NULL, "DMIC1" }, + { "DMIC1R", NULL, "DMIC1" }, + + { "IN1L Mux", "ADC", "ADCL" }, + { "IN1L Mux", "DMIC1", "DMIC1L" }, + { "IN1L Mux", "DMIC2", "DMIC2L" }, + + { "IN1R Mux", "ADC", "ADCR" }, + { "IN1R Mux", "DMIC1", "DMIC1R" }, + { "IN1R Mux", "DMIC2", "DMIC2R" }, + + { "IN2L Mux", "ADC", "ADCL" }, + { "IN2L Mux", "DMIC1", "DMIC1L" }, + { "IN2L Mux", "DMIC2", "DMIC2L" }, + + { "IN2R Mux", "ADC", "ADCR" }, + { "IN2R Mux", "DMIC1", "DMIC1R" }, + { "IN2R Mux", "DMIC2", "DMIC2R" }, + + { "Left Sidetone", "IN1", "IN1L Mux" }, + { "Left Sidetone", "IN2", "IN2L Mux" }, + + { "Right Sidetone", "IN1", "IN1R Mux" }, + { "Right Sidetone", "IN2", "IN2R Mux" }, + + { "DSP1TXL", "IN1 Switch", "IN1L Mux" }, + { "DSP1TXR", "IN1 Switch", "IN1R Mux" }, + + { "DSP2TXL", "IN1 Switch", "IN2L Mux" }, + { "DSP2TXR", "IN1 Switch", "IN2R Mux" }, + + { "AIF1TX0", NULL, "DSP1TXL" }, + { "AIF1TX1", NULL, "DSP1TXR" }, + { "AIF1TX2", NULL, "DSP2TXL" }, + { "AIF1TX3", NULL, "DSP2TXR" }, + { "AIF1TX4", NULL, "AIF2RX0" }, + { "AIF1TX5", NULL, "AIF2RX1" }, + + { "AIF1RX0", NULL, "AIFCLK" }, + { "AIF1RX1", NULL, "AIFCLK" }, + { "AIF1RX2", NULL, "AIFCLK" }, + { "AIF1RX3", NULL, "AIFCLK" }, + { "AIF1RX4", NULL, "AIFCLK" }, + { "AIF1RX5", NULL, "AIFCLK" }, + + { "AIF2RX0", NULL, "AIFCLK" }, + { "AIF2RX1", NULL, "AIFCLK" }, + + { "DSP1RXL", NULL, "SYSDSPCLK" }, + { "DSP1RXR", NULL, "SYSDSPCLK" }, + { "DSP2RXL", NULL, "SYSDSPCLK" }, + { "DSP2RXR", NULL, "SYSDSPCLK" }, + { "DSP1TXL", NULL, "SYSDSPCLK" }, + { "DSP1TXR", NULL, "SYSDSPCLK" }, + { "DSP2TXL", NULL, "SYSDSPCLK" }, + { "DSP2TXR", NULL, "SYSDSPCLK" }, + + { "AIF1RXA", NULL, "AIF1RX0" }, + { "AIF1RXA", NULL, "AIF1RX1" }, + { "AIF1RXB", NULL, "AIF1RX2" }, + { "AIF1RXB", NULL, "AIF1RX3" }, + { "AIF1RXC", NULL, "AIF1RX4" }, + { "AIF1RXC", NULL, "AIF1RX5" }, + + { "AIF2RX", NULL, "AIF2RX0" }, + { "AIF2RX", NULL, "AIF2RX1" }, + + { "AIF2TX", "DSP2", "DSP2TX" }, + { "AIF2TX", "DSP1", "DSP1RX" }, + { "AIF2TX", "AIF1", "AIF1RXC" }, + + { "DSP1RXL", NULL, "DSP1RX" }, + { "DSP1RXR", NULL, "DSP1RX" }, + { "DSP2RXL", NULL, "DSP2RX" }, + { "DSP2RXR", NULL, "DSP2RX" }, + + { "DSP2TX", NULL, "DSP2TXL" }, + { "DSP2TX", NULL, "DSP2TXR" }, + + { "DSP1RX", "AIF1", "AIF1RXA" }, + { "DSP1RX", "AIF2", "AIF2RX" }, + + { "DSP2RX", "AIF1", "AIF1RXB" }, + { "DSP2RX", "AIF2", "AIF2RX" }, + + { "DAC2L Mixer", "DSP2 Switch", "DSP2RXL" }, + { "DAC2L Mixer", "DSP1 Switch", "DSP1RXL" }, + { "DAC2L Mixer", "Right Sidetone Switch", "Right Sidetone" }, + { "DAC2L Mixer", "Left Sidetone Switch", "Left Sidetone" }, + + { "DAC2R Mixer", "DSP2 Switch", "DSP2RXR" }, + { "DAC2R Mixer", "DSP1 Switch", "DSP1RXR" }, + { "DAC2R Mixer", "Right Sidetone Switch", "Right Sidetone" }, + { "DAC2R Mixer", "Left Sidetone Switch", "Left Sidetone" }, + + { "DAC1L Mixer", "DSP2 Switch", "DSP2RXL" }, + { "DAC1L Mixer", "DSP1 Switch", "DSP1RXL" }, + { "DAC1L Mixer", "Right Sidetone Switch", "Right Sidetone" }, + { "DAC1L Mixer", "Left Sidetone Switch", "Left Sidetone" }, + + { "DAC1R Mixer", "DSP2 Switch", "DSP2RXR" }, + { "DAC1R Mixer", "DSP1 Switch", "DSP1RXR" }, + { "DAC1R Mixer", "Right Sidetone Switch", "Right Sidetone" }, + { "DAC1R Mixer", "Left Sidetone Switch", "Left Sidetone" }, + + { "DAC1L", NULL, "DAC1L Mixer" }, + { "DAC1R", NULL, "DAC1R Mixer" }, + { "DAC2L", NULL, "DAC2L Mixer" }, + { "DAC2R", NULL, "DAC2R Mixer" }, + + { "HPOUT2L PGA", NULL, "Charge Pump" }, + { "HPOUT2L PGA", NULL, "DAC2L" }, + { "HPOUT2L_DLY", NULL, "HPOUT2L PGA" }, + { "HPOUT2L_DCS", NULL, "HPOUT2L_DLY" }, + { "HPOUT2L_OUTP", NULL, "HPOUT2L_DCS" }, + { "HPOUT2L_RMV_SHORT", NULL, "HPOUT2L_OUTP" }, + + { "HPOUT2R PGA", NULL, "Charge Pump" }, + { "HPOUT2R PGA", NULL, "DAC2R" }, + { "HPOUT2R_DLY", NULL, "HPOUT2R PGA" }, + { "HPOUT2R_DCS", NULL, "HPOUT2R_DLY" }, + { "HPOUT2R_OUTP", NULL, "HPOUT2R_DCS" }, + { "HPOUT2R_RMV_SHORT", NULL, "HPOUT2R_OUTP" }, + + { "HPOUT1L PGA", NULL, "Charge Pump" }, + { "HPOUT1L PGA", NULL, "DAC1L" }, + { "HPOUT1L_DLY", NULL, "HPOUT1L PGA" }, + { "HPOUT1L_DCS", NULL, "HPOUT1L_DLY" }, + { "HPOUT1L_OUTP", NULL, "HPOUT1L_DCS" }, + { "HPOUT1L_RMV_SHORT", NULL, "HPOUT1L_OUTP" }, + + { "HPOUT1R PGA", NULL, "Charge Pump" }, + { "HPOUT1R PGA", NULL, "DAC1R" }, + { "HPOUT1R_DLY", NULL, "HPOUT1R PGA" }, + { "HPOUT1R_DCS", NULL, "HPOUT1R_DLY" }, + { "HPOUT1R_OUTP", NULL, "HPOUT1R_DCS" }, + { "HPOUT1R_RMV_SHORT", NULL, "HPOUT1R_OUTP" }, + + { "HPOUT2L", NULL, "HPOUT2L_RMV_SHORT" }, + { "HPOUT2R", NULL, "HPOUT2R_RMV_SHORT" }, + { "HPOUT1L", NULL, "HPOUT1L_RMV_SHORT" }, + { "HPOUT1R", NULL, "HPOUT1R_RMV_SHORT" }, + + { "SPKL", "DAC1L", "DAC1L" }, + { "SPKL", "DAC1R", "DAC1R" }, + { "SPKL", "DAC2L", "DAC2L" }, + { "SPKL", "DAC2R", "DAC2R" }, + + { "SPKR", "DAC1L", "DAC1L" }, + { "SPKR", "DAC1R", "DAC1R" }, + { "SPKR", "DAC2L", "DAC2L" }, + { "SPKR", "DAC2R", "DAC2R" }, + + { "SPKL PGA", NULL, "SPKL" }, + { "SPKR PGA", NULL, "SPKR" }, + + { "SPKDAT", NULL, "SPKL PGA" }, + { "SPKDAT", NULL, "SPKR PGA" }, +}; + +static int wm8996_readable_register(struct snd_soc_codec *codec, + unsigned int reg) +{ + /* Due to the sparseness of the register map the compiler + * output from an explicit switch statement ends up being much + * more efficient than a table. + */ + switch (reg) { + case WM8996_SOFTWARE_RESET: + case WM8996_POWER_MANAGEMENT_1: + case WM8996_POWER_MANAGEMENT_2: + case WM8996_POWER_MANAGEMENT_3: + case WM8996_POWER_MANAGEMENT_4: + case WM8996_POWER_MANAGEMENT_5: + case WM8996_POWER_MANAGEMENT_6: + case WM8996_POWER_MANAGEMENT_7: + case WM8996_POWER_MANAGEMENT_8: + case WM8996_LEFT_LINE_INPUT_VOLUME: + case WM8996_RIGHT_LINE_INPUT_VOLUME: + case WM8996_LINE_INPUT_CONTROL: + case WM8996_DAC1_HPOUT1_VOLUME: + case WM8996_DAC2_HPOUT2_VOLUME: + case WM8996_DAC1_LEFT_VOLUME: + case WM8996_DAC1_RIGHT_VOLUME: + case WM8996_DAC2_LEFT_VOLUME: + case WM8996_DAC2_RIGHT_VOLUME: + case WM8996_OUTPUT1_LEFT_VOLUME: + case WM8996_OUTPUT1_RIGHT_VOLUME: + case WM8996_OUTPUT2_LEFT_VOLUME: + case WM8996_OUTPUT2_RIGHT_VOLUME: + case WM8996_MICBIAS_1: + case WM8996_MICBIAS_2: + case WM8996_LDO_1: + case WM8996_LDO_2: + case WM8996_ACCESSORY_DETECT_MODE_1: + case WM8996_ACCESSORY_DETECT_MODE_2: + case WM8996_HEADPHONE_DETECT_1: + case WM8996_HEADPHONE_DETECT_2: + case WM8996_MIC_DETECT_1: + case WM8996_MIC_DETECT_2: + case WM8996_MIC_DETECT_3: + case WM8996_CHARGE_PUMP_1: + case WM8996_CHARGE_PUMP_2: + case WM8996_DC_SERVO_1: + case WM8996_DC_SERVO_2: + case WM8996_DC_SERVO_3: + case WM8996_DC_SERVO_5: + case WM8996_DC_SERVO_6: + case WM8996_DC_SERVO_7: + case WM8996_DC_SERVO_READBACK_0: + case WM8996_ANALOGUE_HP_1: + case WM8996_ANALOGUE_HP_2: + case WM8996_CHIP_REVISION: + case WM8996_CONTROL_INTERFACE_1: + case WM8996_WRITE_SEQUENCER_CTRL_1: + case WM8996_WRITE_SEQUENCER_CTRL_2: + case WM8996_AIF_CLOCKING_1: + case WM8996_AIF_CLOCKING_2: + case WM8996_CLOCKING_1: + case WM8996_CLOCKING_2: + case WM8996_AIF_RATE: + case WM8996_FLL_CONTROL_1: + case WM8996_FLL_CONTROL_2: + case WM8996_FLL_CONTROL_3: + case WM8996_FLL_CONTROL_4: + case WM8996_FLL_CONTROL_5: + case WM8996_FLL_CONTROL_6: + case WM8996_FLL_EFS_1: + case WM8996_FLL_EFS_2: + case WM8996_AIF1_CONTROL: + case WM8996_AIF1_BCLK: + case WM8996_AIF1_TX_LRCLK_1: + case WM8996_AIF1_TX_LRCLK_2: + case WM8996_AIF1_RX_LRCLK_1: + case WM8996_AIF1_RX_LRCLK_2: + case WM8996_AIF1TX_DATA_CONFIGURATION_1: + case WM8996_AIF1TX_DATA_CONFIGURATION_2: + case WM8996_AIF1RX_DATA_CONFIGURATION: + case WM8996_AIF1TX_CHANNEL_0_CONFIGURATION: + case WM8996_AIF1TX_CHANNEL_1_CONFIGURATION: + case WM8996_AIF1TX_CHANNEL_2_CONFIGURATION: + case WM8996_AIF1TX_CHANNEL_3_CONFIGURATION: + case WM8996_AIF1TX_CHANNEL_4_CONFIGURATION: + case WM8996_AIF1TX_CHANNEL_5_CONFIGURATION: + case WM8996_AIF1RX_CHANNEL_0_CONFIGURATION: + case WM8996_AIF1RX_CHANNEL_1_CONFIGURATION: + case WM8996_AIF1RX_CHANNEL_2_CONFIGURATION: + case WM8996_AIF1RX_CHANNEL_3_CONFIGURATION: + case WM8996_AIF1RX_CHANNEL_4_CONFIGURATION: + case WM8996_AIF1RX_CHANNEL_5_CONFIGURATION: + case WM8996_AIF1RX_MONO_CONFIGURATION: + case WM8996_AIF1TX_TEST: + case WM8996_AIF2_CONTROL: + case WM8996_AIF2_BCLK: + case WM8996_AIF2_TX_LRCLK_1: + case WM8996_AIF2_TX_LRCLK_2: + case WM8996_AIF2_RX_LRCLK_1: + case WM8996_AIF2_RX_LRCLK_2: + case WM8996_AIF2TX_DATA_CONFIGURATION_1: + case WM8996_AIF2TX_DATA_CONFIGURATION_2: + case WM8996_AIF2RX_DATA_CONFIGURATION: + case WM8996_AIF2TX_CHANNEL_0_CONFIGURATION: + case WM8996_AIF2TX_CHANNEL_1_CONFIGURATION: + case WM8996_AIF2RX_CHANNEL_0_CONFIGURATION: + case WM8996_AIF2RX_CHANNEL_1_CONFIGURATION: + case WM8996_AIF2RX_MONO_CONFIGURATION: + case WM8996_AIF2TX_TEST: + case WM8996_DSP1_TX_LEFT_VOLUME: + case WM8996_DSP1_TX_RIGHT_VOLUME: + case WM8996_DSP1_RX_LEFT_VOLUME: + case WM8996_DSP1_RX_RIGHT_VOLUME: + case WM8996_DSP1_TX_FILTERS: + case WM8996_DSP1_RX_FILTERS_1: + case WM8996_DSP1_RX_FILTERS_2: + case WM8996_DSP1_DRC_1: + case WM8996_DSP1_DRC_2: + case WM8996_DSP1_DRC_3: + case WM8996_DSP1_DRC_4: + case WM8996_DSP1_DRC_5: + case WM8996_DSP1_RX_EQ_GAINS_1: + case WM8996_DSP1_RX_EQ_GAINS_2: + case WM8996_DSP1_RX_EQ_BAND_1_A: + case WM8996_DSP1_RX_EQ_BAND_1_B: + case WM8996_DSP1_RX_EQ_BAND_1_PG: + case WM8996_DSP1_RX_EQ_BAND_2_A: + case WM8996_DSP1_RX_EQ_BAND_2_B: + case WM8996_DSP1_RX_EQ_BAND_2_C: + case WM8996_DSP1_RX_EQ_BAND_2_PG: + case WM8996_DSP1_RX_EQ_BAND_3_A: + case WM8996_DSP1_RX_EQ_BAND_3_B: + case WM8996_DSP1_RX_EQ_BAND_3_C: + case WM8996_DSP1_RX_EQ_BAND_3_PG: + case WM8996_DSP1_RX_EQ_BAND_4_A: + case WM8996_DSP1_RX_EQ_BAND_4_B: + case WM8996_DSP1_RX_EQ_BAND_4_C: + case WM8996_DSP1_RX_EQ_BAND_4_PG: + case WM8996_DSP1_RX_EQ_BAND_5_A: + case WM8996_DSP1_RX_EQ_BAND_5_B: + case WM8996_DSP1_RX_EQ_BAND_5_PG: + case WM8996_DSP2_TX_LEFT_VOLUME: + case WM8996_DSP2_TX_RIGHT_VOLUME: + case WM8996_DSP2_RX_LEFT_VOLUME: + case WM8996_DSP2_RX_RIGHT_VOLUME: + case WM8996_DSP2_TX_FILTERS: + case WM8996_DSP2_RX_FILTERS_1: + case WM8996_DSP2_RX_FILTERS_2: + case WM8996_DSP2_DRC_1: + case WM8996_DSP2_DRC_2: + case WM8996_DSP2_DRC_3: + case WM8996_DSP2_DRC_4: + case WM8996_DSP2_DRC_5: + case WM8996_DSP2_RX_EQ_GAINS_1: + case WM8996_DSP2_RX_EQ_GAINS_2: + case WM8996_DSP2_RX_EQ_BAND_1_A: + case WM8996_DSP2_RX_EQ_BAND_1_B: + case WM8996_DSP2_RX_EQ_BAND_1_PG: + case WM8996_DSP2_RX_EQ_BAND_2_A: + case WM8996_DSP2_RX_EQ_BAND_2_B: + case WM8996_DSP2_RX_EQ_BAND_2_C: + case WM8996_DSP2_RX_EQ_BAND_2_PG: + case WM8996_DSP2_RX_EQ_BAND_3_A: + case WM8996_DSP2_RX_EQ_BAND_3_B: + case WM8996_DSP2_RX_EQ_BAND_3_C: + case WM8996_DSP2_RX_EQ_BAND_3_PG: + case WM8996_DSP2_RX_EQ_BAND_4_A: + case WM8996_DSP2_RX_EQ_BAND_4_B: + case WM8996_DSP2_RX_EQ_BAND_4_C: + case WM8996_DSP2_RX_EQ_BAND_4_PG: + case WM8996_DSP2_RX_EQ_BAND_5_A: + case WM8996_DSP2_RX_EQ_BAND_5_B: + case WM8996_DSP2_RX_EQ_BAND_5_PG: + case WM8996_DAC1_MIXER_VOLUMES: + case WM8996_DAC1_LEFT_MIXER_ROUTING: + case WM8996_DAC1_RIGHT_MIXER_ROUTING: + case WM8996_DAC2_MIXER_VOLUMES: + case WM8996_DAC2_LEFT_MIXER_ROUTING: + case WM8996_DAC2_RIGHT_MIXER_ROUTING: + case WM8996_DSP1_TX_LEFT_MIXER_ROUTING: + case WM8996_DSP1_TX_RIGHT_MIXER_ROUTING: + case WM8996_DSP2_TX_LEFT_MIXER_ROUTING: + case WM8996_DSP2_TX_RIGHT_MIXER_ROUTING: + case WM8996_DSP_TX_MIXER_SELECT: + case WM8996_DAC_SOFTMUTE: + case WM8996_OVERSAMPLING: + case WM8996_SIDETONE: + case WM8996_GPIO_1: + case WM8996_GPIO_2: + case WM8996_GPIO_3: + case WM8996_GPIO_4: + case WM8996_GPIO_5: + case WM8996_PULL_CONTROL_1: + case WM8996_PULL_CONTROL_2: + case WM8996_INTERRUPT_STATUS_1: + case WM8996_INTERRUPT_STATUS_2: + case WM8996_INTERRUPT_RAW_STATUS_2: + case WM8996_INTERRUPT_STATUS_1_MASK: + case WM8996_INTERRUPT_STATUS_2_MASK: + case WM8996_INTERRUPT_CONTROL: + case WM8996_LEFT_PDM_SPEAKER: + case WM8996_RIGHT_PDM_SPEAKER: + case WM8996_PDM_SPEAKER_MUTE_SEQUENCE: + case WM8996_PDM_SPEAKER_VOLUME: + return 1; + default: + return 0; + } +} + +static int wm8996_volatile_register(struct snd_soc_codec *codec, + unsigned int reg) +{ + switch (reg) { + case WM8996_SOFTWARE_RESET: + case WM8996_CHIP_REVISION: + case WM8996_LDO_1: + case WM8996_LDO_2: + case WM8996_INTERRUPT_STATUS_1: + case WM8996_INTERRUPT_STATUS_2: + case WM8996_INTERRUPT_RAW_STATUS_2: + case WM8996_DC_SERVO_READBACK_0: + case WM8996_DC_SERVO_2: + case WM8996_DC_SERVO_6: + case WM8996_DC_SERVO_7: + case WM8996_FLL_CONTROL_6: + case WM8996_MIC_DETECT_3: + case WM8996_HEADPHONE_DETECT_1: + case WM8996_HEADPHONE_DETECT_2: + return 1; + default: + return 0; + } +} + +static int wm8996_reset(struct snd_soc_codec *codec) +{ + return snd_soc_write(codec, WM8996_SOFTWARE_RESET, 0x8915); +} + +static const int bclk_divs[] = { + 1, 2, 3, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96 +}; + +static void wm8996_update_bclk(struct snd_soc_codec *codec) +{ + struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec); + int aif, best, cur_val, bclk_rate, bclk_reg, i; + + /* Don't bother if we're in a low frequency idle mode that + * can't support audio. + */ + if (wm8996->sysclk < 64000) + return; + + for (aif = 0; aif < WM8996_AIFS; aif++) { + switch (aif) { + case 0: + bclk_reg = WM8996_AIF1_BCLK; + break; + case 1: + bclk_reg = WM8996_AIF2_BCLK; + break; + } + + bclk_rate = wm8996->bclk_rate[aif]; + + /* Pick a divisor for BCLK as close as we can get to ideal */ + best = 0; + for (i = 0; i < ARRAY_SIZE(bclk_divs); i++) { + cur_val = (wm8996->sysclk / bclk_divs[i]) - bclk_rate; + if (cur_val < 0) /* BCLK table is sorted */ + break; + best = i; + } + bclk_rate = wm8996->sysclk / bclk_divs[best]; + dev_dbg(codec->dev, "Using BCLK_DIV %d for actual BCLK %dHz\n", + bclk_divs[best], bclk_rate); + + snd_soc_update_bits(codec, bclk_reg, + WM8996_AIF1_BCLK_DIV_MASK, best); + } +} + +static int wm8996_set_bias_level(struct snd_soc_codec *codec, + enum snd_soc_bias_level level) +{ + struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec); + int ret; + + switch (level) { + case SND_SOC_BIAS_ON: + break; + + case SND_SOC_BIAS_PREPARE: + if (codec->dapm.bias_level == SND_SOC_BIAS_STANDBY) { + snd_soc_update_bits(codec, WM8996_POWER_MANAGEMENT_1, + WM8996_BG_ENA, WM8996_BG_ENA); + msleep(2); + } + break; + + case SND_SOC_BIAS_STANDBY: + if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) { + ret = regulator_bulk_enable(ARRAY_SIZE(wm8996->supplies), + wm8996->supplies); + if (ret != 0) { + dev_err(codec->dev, + "Failed to enable supplies: %d\n", + ret); + return ret; + } + + if (wm8996->pdata.ldo_ena >= 0) { + gpio_set_value_cansleep(wm8996->pdata.ldo_ena, + 1); + msleep(5); + } + + codec->cache_only = false; + snd_soc_cache_sync(codec); + } + + snd_soc_update_bits(codec, WM8996_POWER_MANAGEMENT_1, + WM8996_BG_ENA, 0); + break; + + case SND_SOC_BIAS_OFF: + codec->cache_only = true; + if (wm8996->pdata.ldo_ena >= 0) + gpio_set_value_cansleep(wm8996->pdata.ldo_ena, 0); + regulator_bulk_disable(ARRAY_SIZE(wm8996->supplies), + wm8996->supplies); + break; + } + + codec->dapm.bias_level = level; + + return 0; +} + +static int wm8996_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) +{ + struct snd_soc_codec *codec = dai->codec; + int aifctrl = 0; + int bclk = 0; + int lrclk_tx = 0; + int lrclk_rx = 0; + int aifctrl_reg, bclk_reg, lrclk_tx_reg, lrclk_rx_reg; + + switch (dai->id) { + case 0: + aifctrl_reg = WM8996_AIF1_CONTROL; + bclk_reg = WM8996_AIF1_BCLK; + lrclk_tx_reg = WM8996_AIF1_TX_LRCLK_2; + lrclk_rx_reg = WM8996_AIF1_RX_LRCLK_2; + break; + case 1: + aifctrl_reg = WM8996_AIF2_CONTROL; + bclk_reg = WM8996_AIF2_BCLK; + lrclk_tx_reg = WM8996_AIF2_TX_LRCLK_2; + lrclk_rx_reg = WM8996_AIF2_RX_LRCLK_2; + break; + default: + BUG(); + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_IB_NF: + bclk |= WM8996_AIF1_BCLK_INV; + break; + case SND_SOC_DAIFMT_NB_IF: + lrclk_tx |= WM8996_AIF1TX_LRCLK_INV; + lrclk_rx |= WM8996_AIF1RX_LRCLK_INV; + break; + case SND_SOC_DAIFMT_IB_IF: + bclk |= WM8996_AIF1_BCLK_INV; + lrclk_tx |= WM8996_AIF1TX_LRCLK_INV; + lrclk_rx |= WM8996_AIF1RX_LRCLK_INV; + break; + } + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBS_CFS: + break; + case SND_SOC_DAIFMT_CBS_CFM: + lrclk_tx |= WM8996_AIF1TX_LRCLK_MSTR; + lrclk_rx |= WM8996_AIF1RX_LRCLK_MSTR; + break; + case SND_SOC_DAIFMT_CBM_CFS: + bclk |= WM8996_AIF1_BCLK_MSTR; + break; + case SND_SOC_DAIFMT_CBM_CFM: + bclk |= WM8996_AIF1_BCLK_MSTR; + lrclk_tx |= WM8996_AIF1TX_LRCLK_MSTR; + lrclk_rx |= WM8996_AIF1RX_LRCLK_MSTR; + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_DSP_A: + break; + case SND_SOC_DAIFMT_DSP_B: + aifctrl |= 1; + break; + case SND_SOC_DAIFMT_I2S: + aifctrl |= 2; + break; + case SND_SOC_DAIFMT_LEFT_J: + aifctrl |= 3; + break; + default: + return -EINVAL; + } + + snd_soc_update_bits(codec, aifctrl_reg, WM8996_AIF1_FMT_MASK, aifctrl); + snd_soc_update_bits(codec, bclk_reg, + WM8996_AIF1_BCLK_INV | WM8996_AIF1_BCLK_MSTR, + bclk); + snd_soc_update_bits(codec, lrclk_tx_reg, + WM8996_AIF1TX_LRCLK_INV | + WM8996_AIF1TX_LRCLK_MSTR, + lrclk_tx); + snd_soc_update_bits(codec, lrclk_rx_reg, + WM8996_AIF1RX_LRCLK_INV | + WM8996_AIF1RX_LRCLK_MSTR, + lrclk_rx); + + return 0; +} + +static const int dsp_divs[] = { + 48000, 32000, 16000, 8000 +}; + +static int wm8996_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_codec *codec = dai->codec; + struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec); + int bits, i, bclk_rate; + int aifdata = 0; + int lrclk = 0; + int dsp = 0; + int aifdata_reg, lrclk_reg, dsp_shift; + + switch (dai->id) { + case 0: + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK || + (snd_soc_read(codec, WM8996_GPIO_1)) & WM8996_GP1_FN_MASK) { + aifdata_reg = WM8996_AIF1RX_DATA_CONFIGURATION; + lrclk_reg = WM8996_AIF1_RX_LRCLK_1; + } else { + aifdata_reg = WM8996_AIF1TX_DATA_CONFIGURATION_1; + lrclk_reg = WM8996_AIF1_TX_LRCLK_1; + } + dsp_shift = 0; + break; + case 1: + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK || + (snd_soc_read(codec, WM8996_GPIO_2)) & WM8996_GP2_FN_MASK) { + aifdata_reg = WM8996_AIF2RX_DATA_CONFIGURATION; + lrclk_reg = WM8996_AIF2_RX_LRCLK_1; + } else { + aifdata_reg = WM8996_AIF2TX_DATA_CONFIGURATION_1; + lrclk_reg = WM8996_AIF2_TX_LRCLK_1; + } + dsp_shift = WM8996_DSP2_DIV_SHIFT; + break; + default: + BUG(); + return -EINVAL; + } + + bclk_rate = snd_soc_params_to_bclk(params); + if (bclk_rate < 0) { + dev_err(codec->dev, "Unsupported BCLK rate: %d\n", bclk_rate); + return bclk_rate; + } + + wm8996->bclk_rate[dai->id] = bclk_rate; + wm8996->rx_rate[dai->id] = params_rate(params); + + /* Needs looking at for TDM */ + bits = snd_pcm_format_width(params_format(params)); + if (bits < 0) + return bits; + aifdata |= (bits << WM8996_AIF1TX_WL_SHIFT) | bits; + + for (i = 0; i < ARRAY_SIZE(dsp_divs); i++) { + if (dsp_divs[i] == params_rate(params)) + break; + } + if (i == ARRAY_SIZE(dsp_divs)) { + dev_err(codec->dev, "Unsupported sample rate %dHz\n", + params_rate(params)); + return -EINVAL; + } + dsp |= i << dsp_shift; + + wm8996_update_bclk(codec); + + lrclk = bclk_rate / params_rate(params); + dev_dbg(dai->dev, "Using LRCLK rate %d for actual LRCLK %dHz\n", + lrclk, bclk_rate / lrclk); + + snd_soc_update_bits(codec, aifdata_reg, + WM8996_AIF1TX_WL_MASK | + WM8996_AIF1TX_SLOT_LEN_MASK, + aifdata); + snd_soc_update_bits(codec, lrclk_reg, WM8996_AIF1RX_RATE_MASK, + lrclk); + snd_soc_update_bits(codec, WM8996_AIF_CLOCKING_2, + WM8996_DSP1_DIV_SHIFT << dsp_shift, dsp); + + return 0; +} + +static int wm8996_set_sysclk(struct snd_soc_dai *dai, + int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_codec *codec = dai->codec; + struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec); + int lfclk = 0; + int ratediv = 0; + int src; + int old; + + if (freq == wm8996->sysclk && clk_id == wm8996->sysclk_src) + return 0; + + /* Disable SYSCLK while we reconfigure */ + old = snd_soc_read(codec, WM8996_AIF_CLOCKING_1) & WM8996_SYSCLK_ENA; + snd_soc_update_bits(codec, WM8996_AIF_CLOCKING_1, + WM8996_SYSCLK_ENA, 0); + + switch (clk_id) { + case WM8996_SYSCLK_MCLK1: + wm8996->sysclk = freq; + src = 0; + break; + case WM8996_SYSCLK_MCLK2: + wm8996->sysclk = freq; + src = 1; + break; + case WM8996_SYSCLK_FLL: + wm8996->sysclk = freq; + src = 2; + break; + default: + dev_err(codec->dev, "Unsupported clock source %d\n", clk_id); + return -EINVAL; + } + + switch (wm8996->sysclk) { + case 6144000: + snd_soc_update_bits(codec, WM8996_AIF_RATE, + WM8996_SYSCLK_RATE, 0); + break; + case 24576000: + ratediv = WM8996_SYSCLK_DIV; + case 12288000: + snd_soc_update_bits(codec, WM8996_AIF_RATE, + WM8996_SYSCLK_RATE, WM8996_SYSCLK_RATE); + break; + case 32000: + case 32768: + lfclk = WM8996_LFCLK_ENA; + break; + default: + dev_warn(codec->dev, "Unsupported clock rate %dHz\n", + wm8996->sysclk); + return -EINVAL; + } + + wm8996_update_bclk(codec); + + snd_soc_update_bits(codec, WM8996_AIF_CLOCKING_1, + WM8996_SYSCLK_SRC_MASK | WM8996_SYSCLK_DIV_MASK, + src << WM8996_SYSCLK_SRC_SHIFT | ratediv); + snd_soc_update_bits(codec, WM8996_CLOCKING_1, WM8996_LFCLK_ENA, lfclk); + snd_soc_update_bits(codec, WM8996_AIF_CLOCKING_1, + WM8996_SYSCLK_ENA, old); + + wm8996->sysclk_src = clk_id; + + return 0; +} + +struct _fll_div { + u16 fll_fratio; + u16 fll_outdiv; + u16 fll_refclk_div; + u16 fll_loop_gain; + u16 fll_ref_freq; + u16 n; + u16 theta; + u16 lambda; +}; + +static struct { + unsigned int min; + unsigned int max; + u16 fll_fratio; + int ratio; +} fll_fratios[] = { + { 0, 64000, 4, 16 }, + { 64000, 128000, 3, 8 }, + { 128000, 256000, 2, 4 }, + { 256000, 1000000, 1, 2 }, + { 1000000, 13500000, 0, 1 }, +}; + +static int fll_factors(struct _fll_div *fll_div, unsigned int Fref, + unsigned int Fout) +{ + unsigned int target; + unsigned int div; + unsigned int fratio, gcd_fll; + int i; + + /* Fref must be <=13.5MHz */ + div = 1; + fll_div->fll_refclk_div = 0; + while ((Fref / div) > 13500000) { + div *= 2; + fll_div->fll_refclk_div++; + + if (div > 8) { + pr_err("Can't scale %dMHz input down to <=13.5MHz\n", + Fref); + return -EINVAL; + } + } + + pr_debug("FLL Fref=%u Fout=%u\n", Fref, Fout); + + /* Apply the division for our remaining calculations */ + Fref /= div; + + if (Fref >= 3000000) + fll_div->fll_loop_gain = 5; + else + fll_div->fll_loop_gain = 0; + + if (Fref >= 48000) + fll_div->fll_ref_freq = 0; + else + fll_div->fll_ref_freq = 1; + + /* Fvco should be 90-100MHz; don't check the upper bound */ + div = 2; + while (Fout * div < 90000000) { + div++; + if (div > 64) { + pr_err("Unable to find FLL_OUTDIV for Fout=%uHz\n", + Fout); + return -EINVAL; + } + } + target = Fout * div; + fll_div->fll_outdiv = div - 1; + + pr_debug("FLL Fvco=%dHz\n", target); + + /* Find an appropraite FLL_FRATIO and factor it out of the target */ + for (i = 0; i < ARRAY_SIZE(fll_fratios); i++) { + if (fll_fratios[i].min <= Fref && Fref <= fll_fratios[i].max) { + fll_div->fll_fratio = fll_fratios[i].fll_fratio; + fratio = fll_fratios[i].ratio; + break; + } + } + if (i == ARRAY_SIZE(fll_fratios)) { + pr_err("Unable to find FLL_FRATIO for Fref=%uHz\n", Fref); + return -EINVAL; + } + + fll_div->n = target / (fratio * Fref); + + if (target % Fref == 0) { + fll_div->theta = 0; + fll_div->lambda = 0; + } else { + gcd_fll = gcd(target, fratio * Fref); + + fll_div->theta = (target - (fll_div->n * fratio * Fref)) + / gcd_fll; + fll_div->lambda = (fratio * Fref) / gcd_fll; + } + + pr_debug("FLL N=%x THETA=%x LAMBDA=%x\n", + fll_div->n, fll_div->theta, fll_div->lambda); + pr_debug("FLL_FRATIO=%x FLL_OUTDIV=%x FLL_REFCLK_DIV=%x\n", + fll_div->fll_fratio, fll_div->fll_outdiv, + fll_div->fll_refclk_div); + + return 0; +} + +static int wm8996_set_fll(struct snd_soc_codec *codec, int fll_id, int source, + unsigned int Fref, unsigned int Fout) +{ + struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec); + struct i2c_client *i2c = to_i2c_client(codec->dev); + struct _fll_div fll_div; + unsigned long timeout; + int ret, reg; + + /* Any change? */ + if (source == wm8996->fll_src && Fref == wm8996->fll_fref && + Fout == wm8996->fll_fout) + return 0; + + if (Fout == 0) { + dev_dbg(codec->dev, "FLL disabled\n"); + + wm8996->fll_fref = 0; + wm8996->fll_fout = 0; + + snd_soc_update_bits(codec, WM8996_FLL_CONTROL_1, + WM8996_FLL_ENA, 0); + + return 0; + } + + ret = fll_factors(&fll_div, Fref, Fout); + if (ret != 0) + return ret; + + switch (source) { + case WM8996_FLL_MCLK1: + reg = 0; + break; + case WM8996_FLL_MCLK2: + reg = 1; + break; + case WM8996_FLL_DACLRCLK1: + reg = 2; + break; + case WM8996_FLL_BCLK1: + reg = 3; + break; + default: + dev_err(codec->dev, "Unknown FLL source %d\n", ret); + return -EINVAL; + } + + reg |= fll_div.fll_refclk_div << WM8996_FLL_REFCLK_DIV_SHIFT; + reg |= fll_div.fll_ref_freq << WM8996_FLL_REF_FREQ_SHIFT; + + snd_soc_update_bits(codec, WM8996_FLL_CONTROL_5, + WM8996_FLL_REFCLK_DIV_MASK | WM8996_FLL_REF_FREQ | + WM8996_FLL_REFCLK_SRC_MASK, reg); + + reg = 0; + if (fll_div.theta || fll_div.lambda) + reg |= WM8996_FLL_EFS_ENA | (3 << WM8996_FLL_LFSR_SEL_SHIFT); + else + reg |= 1 << WM8996_FLL_LFSR_SEL_SHIFT; + snd_soc_write(codec, WM8996_FLL_EFS_2, reg); + + snd_soc_update_bits(codec, WM8996_FLL_CONTROL_2, + WM8996_FLL_OUTDIV_MASK | + WM8996_FLL_FRATIO_MASK, + (fll_div.fll_outdiv << WM8996_FLL_OUTDIV_SHIFT) | + (fll_div.fll_fratio)); + + snd_soc_write(codec, WM8996_FLL_CONTROL_3, fll_div.theta); + + snd_soc_update_bits(codec, WM8996_FLL_CONTROL_4, + WM8996_FLL_N_MASK | WM8996_FLL_LOOP_GAIN_MASK, + (fll_div.n << WM8996_FLL_N_SHIFT) | + fll_div.fll_loop_gain); + + snd_soc_write(codec, WM8996_FLL_EFS_1, fll_div.lambda); + + snd_soc_update_bits(codec, WM8996_FLL_CONTROL_1, + WM8996_FLL_ENA, WM8996_FLL_ENA); + + /* The FLL supports live reconfiguration - kick that in case we were + * already enabled. + */ + snd_soc_write(codec, WM8996_FLL_CONTROL_6, WM8996_FLL_SWITCH_CLK); + + /* Wait for the FLL to lock, using the interrupt if possible */ + if (Fref > 1000000) + timeout = usecs_to_jiffies(300); + else + timeout = msecs_to_jiffies(2); + + /* Allow substantially longer if we've actually got the IRQ */ + if (i2c->irq) + timeout *= 1000; + + ret = wait_for_completion_timeout(&wm8996->fll_lock, timeout); + + if (ret == 0 && i2c->irq) { + dev_err(codec->dev, "Timed out waiting for FLL\n"); + ret = -ETIMEDOUT; + } else { + ret = 0; + } + + dev_dbg(codec->dev, "FLL configured for %dHz->%dHz\n", Fref, Fout); + + wm8996->fll_fref = Fref; + wm8996->fll_fout = Fout; + wm8996->fll_src = source; + + return ret; +} + +#ifdef CONFIG_GPIOLIB +static inline struct wm8996_priv *gpio_to_wm8996(struct gpio_chip *chip) +{ + return container_of(chip, struct wm8996_priv, gpio_chip); +} + +static void wm8996_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct wm8996_priv *wm8996 = gpio_to_wm8996(chip); + struct snd_soc_codec *codec = wm8996->codec; + + snd_soc_update_bits(codec, WM8996_GPIO_1 + offset, + WM8996_GP1_LVL, !!value << WM8996_GP1_LVL_SHIFT); +} + +static int wm8996_gpio_direction_out(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct wm8996_priv *wm8996 = gpio_to_wm8996(chip); + struct snd_soc_codec *codec = wm8996->codec; + int val; + + val = (1 << WM8996_GP1_FN_SHIFT) | (!!value << WM8996_GP1_LVL_SHIFT); + + return snd_soc_update_bits(codec, WM8996_GPIO_1 + offset, + WM8996_GP1_FN_MASK | WM8996_GP1_DIR | + WM8996_GP1_LVL, val); +} + +static int wm8996_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct wm8996_priv *wm8996 = gpio_to_wm8996(chip); + struct snd_soc_codec *codec = wm8996->codec; + int ret; + + ret = snd_soc_read(codec, WM8996_GPIO_1 + offset); + if (ret < 0) + return ret; + + return (ret & WM8996_GP1_LVL) != 0; +} + +static int wm8996_gpio_direction_in(struct gpio_chip *chip, unsigned offset) +{ + struct wm8996_priv *wm8996 = gpio_to_wm8996(chip); + struct snd_soc_codec *codec = wm8996->codec; + + return snd_soc_update_bits(codec, WM8996_GPIO_1 + offset, + WM8996_GP1_FN_MASK | WM8996_GP1_DIR, + (1 << WM8996_GP1_FN_SHIFT) | + (1 << WM8996_GP1_DIR_SHIFT)); +} + +static struct gpio_chip wm8996_template_chip = { + .label = "wm8996", + .owner = THIS_MODULE, + .direction_output = wm8996_gpio_direction_out, + .set = wm8996_gpio_set, + .direction_input = wm8996_gpio_direction_in, + .get = wm8996_gpio_get, + .can_sleep = 1, +}; + +static void wm8996_init_gpio(struct snd_soc_codec *codec) +{ + struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec); + int ret; + + wm8996->gpio_chip = wm8996_template_chip; + wm8996->gpio_chip.ngpio = 5; + wm8996->gpio_chip.dev = codec->dev; + + if (wm8996->pdata.gpio_base) + wm8996->gpio_chip.base = wm8996->pdata.gpio_base; + else + wm8996->gpio_chip.base = -1; + + ret = gpiochip_add(&wm8996->gpio_chip); + if (ret != 0) + dev_err(codec->dev, "Failed to add GPIOs: %d\n", ret); +} + +static void wm8996_free_gpio(struct snd_soc_codec *codec) +{ + struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec); + int ret; + + ret = gpiochip_remove(&wm8996->gpio_chip); + if (ret != 0) + dev_err(codec->dev, "Failed to remove GPIOs: %d\n", ret); +} +#else +static void wm8996_init_gpio(struct snd_soc_codec *codec) +{ +} + +static void wm8996_free_gpio(struct snd_soc_codec *codec) +{ +} +#endif + +/** + * wm8996_detect - Enable default WM8996 jack detection + * + * The WM8996 has advanced accessory detection support for headsets. + * This function provides a default implementation which integrates + * the majority of this functionality with minimal user configuration. + * + * This will detect headset, headphone and short circuit button and + * will also detect inverted microphone ground connections and update + * the polarity of the connections. + */ +int wm8996_detect(struct snd_soc_codec *codec, struct snd_soc_jack *jack, + wm8996_polarity_fn polarity_cb) +{ + struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec); + + wm8996->jack = jack; + wm8996->detecting = true; + wm8996->polarity_cb = polarity_cb; + + if (wm8996->polarity_cb) + wm8996->polarity_cb(codec, 0); + + /* Clear discarge to avoid noise during detection */ + snd_soc_update_bits(codec, WM8996_MICBIAS_1, + WM8996_MICB1_DISCH, 0); + snd_soc_update_bits(codec, WM8996_MICBIAS_2, + WM8996_MICB2_DISCH, 0); + + /* LDO2 powers the microphones, SYSCLK clocks detection */ + snd_soc_dapm_force_enable_pin(&codec->dapm, "LDO2"); + snd_soc_dapm_force_enable_pin(&codec->dapm, "SYSCLK"); + + /* We start off just enabling microphone detection - even a + * plain headphone will trigger detection. + */ + snd_soc_update_bits(codec, WM8996_MIC_DETECT_1, + WM8996_MICD_ENA, WM8996_MICD_ENA); + + /* Slowest detection rate, gives debounce for initial detection */ + snd_soc_update_bits(codec, WM8996_MIC_DETECT_1, + WM8996_MICD_RATE_MASK, + WM8996_MICD_RATE_MASK); + + /* Enable interrupts and we're off */ + snd_soc_update_bits(codec, WM8996_INTERRUPT_STATUS_2_MASK, + WM8996_IM_MICD_EINT, 0); + + return 0; +} +EXPORT_SYMBOL_GPL(wm8996_detect); + +static void wm8996_micd(struct snd_soc_codec *codec) +{ + struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec); + int val, reg; + + val = snd_soc_read(codec, WM8996_MIC_DETECT_3); + + dev_dbg(codec->dev, "Microphone event: %x\n", val); + + if (!(val & WM8996_MICD_VALID)) { + dev_warn(codec->dev, "Microphone detection state invalid\n"); + return; + } + + /* No accessory, reset everything and report removal */ + if (!(val & WM8996_MICD_STS)) { + dev_dbg(codec->dev, "Jack removal detected\n"); + wm8996->jack_mic = false; + wm8996->detecting = true; + snd_soc_jack_report(wm8996->jack, 0, + SND_JACK_HEADSET | SND_JACK_BTN_0); + snd_soc_update_bits(codec, WM8996_MIC_DETECT_1, + WM8996_MICD_RATE_MASK, + WM8996_MICD_RATE_MASK); + return; + } + + /* If the measurement is very high we've got a microphone but + * do a little debounce to account for mechanical issues. + */ + if (val & 0x400) { + dev_dbg(codec->dev, "Microphone detected\n"); + snd_soc_jack_report(wm8996->jack, SND_JACK_HEADSET, + SND_JACK_HEADSET | SND_JACK_BTN_0); + wm8996->jack_mic = true; + wm8996->detecting = false; + + /* Increase poll rate to give better responsiveness + * for buttons */ + snd_soc_update_bits(codec, WM8996_MIC_DETECT_1, + WM8996_MICD_RATE_MASK, + 5 << WM8996_MICD_RATE_SHIFT); + } + + /* If we detected a lower impedence during initial startup + * then we probably have the wrong polarity, flip it. Don't + * do this for the lowest impedences to speed up detection of + * plain headphones. + */ + if (wm8996->detecting && (val & 0x3f0)) { + reg = snd_soc_read(codec, WM8996_ACCESSORY_DETECT_MODE_2); + reg ^= WM8996_HPOUT1FB_SRC | WM8996_MICD_SRC | + WM8996_MICD_BIAS_SRC; + snd_soc_update_bits(codec, WM8996_ACCESSORY_DETECT_MODE_2, + WM8996_HPOUT1FB_SRC | WM8996_MICD_SRC | + WM8996_MICD_BIAS_SRC, reg); + + if (wm8996->polarity_cb) + wm8996->polarity_cb(codec, + (reg & WM8996_MICD_SRC) != 0); + + dev_dbg(codec->dev, "Set microphone polarity to %d\n", + (reg & WM8996_MICD_SRC) != 0); + + return; + } + + /* Don't distinguish between buttons, just report any low + * impedence as BTN_0. + */ + if (val & 0x3fc) { + if (wm8996->jack_mic) { + dev_dbg(codec->dev, "Mic button detected\n"); + snd_soc_jack_report(wm8996->jack, + SND_JACK_HEADSET | SND_JACK_BTN_0, + SND_JACK_HEADSET | SND_JACK_BTN_0); + } else { + dev_dbg(codec->dev, "Headphone detected\n"); + snd_soc_jack_report(wm8996->jack, + SND_JACK_HEADPHONE, + SND_JACK_HEADSET | + SND_JACK_BTN_0); + + /* Increase the detection rate a bit for + * responsiveness. + */ + snd_soc_update_bits(codec, WM8996_MIC_DETECT_1, + WM8996_MICD_RATE_MASK, + 7 << WM8996_MICD_RATE_SHIFT); + + wm8996->detecting = false; + } + } +} + +static irqreturn_t wm8996_irq(int irq, void *data) +{ + struct snd_soc_codec *codec = data; + struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec); + int irq_val; + + irq_val = snd_soc_read(codec, WM8996_INTERRUPT_STATUS_2); + if (irq_val < 0) { + dev_err(codec->dev, "Failed to read IRQ status: %d\n", + irq_val); + return IRQ_NONE; + } + irq_val &= ~snd_soc_read(codec, WM8996_INTERRUPT_STATUS_2_MASK); + + snd_soc_write(codec, WM8996_INTERRUPT_STATUS_2, irq_val); + + if (irq_val & (WM8996_DCS_DONE_01_EINT | WM8996_DCS_DONE_23_EINT)) { + dev_dbg(codec->dev, "DC servo IRQ\n"); + complete(&wm8996->dcs_done); + } + + if (irq_val & WM8996_FIFOS_ERR_EINT) + dev_err(codec->dev, "Digital core FIFO error\n"); + + if (irq_val & WM8996_FLL_LOCK_EINT) { + dev_dbg(codec->dev, "FLL locked\n"); + complete(&wm8996->fll_lock); + } + + if (irq_val & WM8996_MICD_EINT) + wm8996_micd(codec); + + if (irq_val) + return IRQ_HANDLED; + else + return IRQ_NONE; +} + +static irqreturn_t wm8996_edge_irq(int irq, void *data) +{ + irqreturn_t ret = IRQ_NONE; + irqreturn_t val; + + do { + val = wm8996_irq(irq, data); + if (val != IRQ_NONE) + ret = val; + } while (val != IRQ_NONE); + + return ret; +} + +static void wm8996_retune_mobile_pdata(struct snd_soc_codec *codec) +{ + struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec); + struct wm8996_pdata *pdata = &wm8996->pdata; + + struct snd_kcontrol_new controls[] = { + SOC_ENUM_EXT("DSP1 EQ Mode", + wm8996->retune_mobile_enum, + wm8996_get_retune_mobile_enum, + wm8996_put_retune_mobile_enum), + SOC_ENUM_EXT("DSP2 EQ Mode", + wm8996->retune_mobile_enum, + wm8996_get_retune_mobile_enum, + wm8996_put_retune_mobile_enum), + }; + int ret, i, j; + const char **t; + + /* We need an array of texts for the enum API but the number + * of texts is likely to be less than the number of + * configurations due to the sample rate dependency of the + * configurations. */ + wm8996->num_retune_mobile_texts = 0; + wm8996->retune_mobile_texts = NULL; + for (i = 0; i < pdata->num_retune_mobile_cfgs; i++) { + for (j = 0; j < wm8996->num_retune_mobile_texts; j++) { + if (strcmp(pdata->retune_mobile_cfgs[i].name, + wm8996->retune_mobile_texts[j]) == 0) + break; + } + + if (j != wm8996->num_retune_mobile_texts) + continue; + + /* Expand the array... */ + t = krealloc(wm8996->retune_mobile_texts, + sizeof(char *) * + (wm8996->num_retune_mobile_texts + 1), + GFP_KERNEL); + if (t == NULL) + continue; + + /* ...store the new entry... */ + t[wm8996->num_retune_mobile_texts] = + pdata->retune_mobile_cfgs[i].name; + + /* ...and remember the new version. */ + wm8996->num_retune_mobile_texts++; + wm8996->retune_mobile_texts = t; + } + + dev_dbg(codec->dev, "Allocated %d unique ReTune Mobile names\n", + wm8996->num_retune_mobile_texts); + + wm8996->retune_mobile_enum.max = wm8996->num_retune_mobile_texts; + wm8996->retune_mobile_enum.texts = wm8996->retune_mobile_texts; + + ret = snd_soc_add_controls(codec, controls, ARRAY_SIZE(controls)); + if (ret != 0) + dev_err(codec->dev, + "Failed to add ReTune Mobile controls: %d\n", ret); +} + +static int wm8996_probe(struct snd_soc_codec *codec) +{ + int ret; + struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec); + struct i2c_client *i2c = to_i2c_client(codec->dev); + struct snd_soc_dapm_context *dapm = &codec->dapm; + int i, irq_flags; + + wm8996->codec = codec; + + init_completion(&wm8996->dcs_done); + init_completion(&wm8996->fll_lock); + + dapm->idle_bias_off = true; + dapm->bias_level = SND_SOC_BIAS_OFF; + + ret = snd_soc_codec_set_cache_io(codec, 16, 16, SND_SOC_I2C); + if (ret != 0) { + dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret); + goto err; + } + + for (i = 0; i < ARRAY_SIZE(wm8996->supplies); i++) + wm8996->supplies[i].supply = wm8996_supply_names[i]; + + ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(wm8996->supplies), + wm8996->supplies); + if (ret != 0) { + dev_err(codec->dev, "Failed to request supplies: %d\n", ret); + goto err; + } + + wm8996->disable_nb[0].notifier_call = wm8996_regulator_event_0; + wm8996->disable_nb[1].notifier_call = wm8996_regulator_event_1; + wm8996->disable_nb[2].notifier_call = wm8996_regulator_event_2; + wm8996->disable_nb[3].notifier_call = wm8996_regulator_event_3; + + /* This should really be moved into the regulator core */ + for (i = 0; i < ARRAY_SIZE(wm8996->supplies); i++) { + ret = regulator_register_notifier(wm8996->supplies[i].consumer, + &wm8996->disable_nb[i]); + if (ret != 0) { + dev_err(codec->dev, + "Failed to register regulator notifier: %d\n", + ret); + } + } + + ret = regulator_bulk_enable(ARRAY_SIZE(wm8996->supplies), + wm8996->supplies); + if (ret != 0) { + dev_err(codec->dev, "Failed to enable supplies: %d\n", ret); + goto err_get; + } + + if (wm8996->pdata.ldo_ena >= 0) { + gpio_set_value_cansleep(wm8996->pdata.ldo_ena, 1); + msleep(5); + } + + ret = snd_soc_read(codec, WM8996_SOFTWARE_RESET); + if (ret < 0) { + dev_err(codec->dev, "Failed to read ID register: %d\n", ret); + goto err_enable; + } + if (ret != 0x8915) { + dev_err(codec->dev, "Device is not a WM8996, ID %x\n", ret); + ret = -EINVAL; + goto err_enable; + } + + ret = snd_soc_read(codec, WM8996_CHIP_REVISION); + if (ret < 0) { + dev_err(codec->dev, "Failed to read device revision: %d\n", + ret); + goto err_enable; + } + + dev_info(codec->dev, "revision %c\n", + (ret & WM8996_CHIP_REV_MASK) + 'A'); + + if (wm8996->pdata.ldo_ena >= 0) { + gpio_set_value_cansleep(wm8996->pdata.ldo_ena, 0); + } else { + ret = wm8996_reset(codec); + if (ret < 0) { + dev_err(codec->dev, "Failed to issue reset\n"); + goto err_enable; + } + } + + codec->cache_only = true; + + /* Apply platform data settings */ + snd_soc_update_bits(codec, WM8996_LINE_INPUT_CONTROL, + WM8996_INL_MODE_MASK | WM8996_INR_MODE_MASK, + wm8996->pdata.inl_mode << WM8996_INL_MODE_SHIFT | + wm8996->pdata.inr_mode); + + for (i = 0; i < ARRAY_SIZE(wm8996->pdata.gpio_default); i++) { + if (!wm8996->pdata.gpio_default[i]) + continue; + + snd_soc_write(codec, WM8996_GPIO_1 + i, + wm8996->pdata.gpio_default[i] & 0xffff); + } + + if (wm8996->pdata.spkmute_seq) + snd_soc_update_bits(codec, WM8996_PDM_SPEAKER_MUTE_SEQUENCE, + WM8996_SPK_MUTE_ENDIAN | + WM8996_SPK_MUTE_SEQ1_MASK, + wm8996->pdata.spkmute_seq); + + snd_soc_update_bits(codec, WM8996_ACCESSORY_DETECT_MODE_2, + WM8996_MICD_BIAS_SRC | WM8996_HPOUT1FB_SRC | + WM8996_MICD_SRC, wm8996->pdata.micdet_def); + + /* Latch volume update bits */ + snd_soc_update_bits(codec, WM8996_LEFT_LINE_INPUT_VOLUME, + WM8996_IN1_VU, WM8996_IN1_VU); + snd_soc_update_bits(codec, WM8996_RIGHT_LINE_INPUT_VOLUME, + WM8996_IN1_VU, WM8996_IN1_VU); + + snd_soc_update_bits(codec, WM8996_DAC1_LEFT_VOLUME, + WM8996_DAC1_VU, WM8996_DAC1_VU); + snd_soc_update_bits(codec, WM8996_DAC1_RIGHT_VOLUME, + WM8996_DAC1_VU, WM8996_DAC1_VU); + snd_soc_update_bits(codec, WM8996_DAC2_LEFT_VOLUME, + WM8996_DAC2_VU, WM8996_DAC2_VU); + snd_soc_update_bits(codec, WM8996_DAC2_RIGHT_VOLUME, + WM8996_DAC2_VU, WM8996_DAC2_VU); + + snd_soc_update_bits(codec, WM8996_OUTPUT1_LEFT_VOLUME, + WM8996_DAC1_VU, WM8996_DAC1_VU); + snd_soc_update_bits(codec, WM8996_OUTPUT1_RIGHT_VOLUME, + WM8996_DAC1_VU, WM8996_DAC1_VU); + snd_soc_update_bits(codec, WM8996_OUTPUT2_LEFT_VOLUME, + WM8996_DAC2_VU, WM8996_DAC2_VU); + snd_soc_update_bits(codec, WM8996_OUTPUT2_RIGHT_VOLUME, + WM8996_DAC2_VU, WM8996_DAC2_VU); + + snd_soc_update_bits(codec, WM8996_DSP1_TX_LEFT_VOLUME, + WM8996_DSP1TX_VU, WM8996_DSP1TX_VU); + snd_soc_update_bits(codec, WM8996_DSP1_TX_RIGHT_VOLUME, + WM8996_DSP1TX_VU, WM8996_DSP1TX_VU); + snd_soc_update_bits(codec, WM8996_DSP2_TX_LEFT_VOLUME, + WM8996_DSP2TX_VU, WM8996_DSP2TX_VU); + snd_soc_update_bits(codec, WM8996_DSP2_TX_RIGHT_VOLUME, + WM8996_DSP2TX_VU, WM8996_DSP2TX_VU); + + snd_soc_update_bits(codec, WM8996_DSP1_RX_LEFT_VOLUME, + WM8996_DSP1RX_VU, WM8996_DSP1RX_VU); + snd_soc_update_bits(codec, WM8996_DSP1_RX_RIGHT_VOLUME, + WM8996_DSP1RX_VU, WM8996_DSP1RX_VU); + snd_soc_update_bits(codec, WM8996_DSP2_RX_LEFT_VOLUME, + WM8996_DSP2RX_VU, WM8996_DSP2RX_VU); + snd_soc_update_bits(codec, WM8996_DSP2_RX_RIGHT_VOLUME, + WM8996_DSP2RX_VU, WM8996_DSP2RX_VU); + + /* No support currently for the underclocked TDM modes and + * pick a default TDM layout with each channel pair working with + * slots 0 and 1. */ + snd_soc_update_bits(codec, WM8996_AIF1RX_CHANNEL_0_CONFIGURATION, + WM8996_AIF1RX_CHAN0_SLOTS_MASK | + WM8996_AIF1RX_CHAN0_START_SLOT_MASK, + 1 << WM8996_AIF1RX_CHAN0_SLOTS_SHIFT | 0); + snd_soc_update_bits(codec, WM8996_AIF1RX_CHANNEL_1_CONFIGURATION, + WM8996_AIF1RX_CHAN1_SLOTS_MASK | + WM8996_AIF1RX_CHAN1_START_SLOT_MASK, + 1 << WM8996_AIF1RX_CHAN1_SLOTS_SHIFT | 1); + snd_soc_update_bits(codec, WM8996_AIF1RX_CHANNEL_2_CONFIGURATION, + WM8996_AIF1RX_CHAN2_SLOTS_MASK | + WM8996_AIF1RX_CHAN2_START_SLOT_MASK, + 1 << WM8996_AIF1RX_CHAN2_SLOTS_SHIFT | 0); + snd_soc_update_bits(codec, WM8996_AIF1RX_CHANNEL_3_CONFIGURATION, + WM8996_AIF1RX_CHAN3_SLOTS_MASK | + WM8996_AIF1RX_CHAN0_START_SLOT_MASK, + 1 << WM8996_AIF1RX_CHAN3_SLOTS_SHIFT | 1); + snd_soc_update_bits(codec, WM8996_AIF1RX_CHANNEL_4_CONFIGURATION, + WM8996_AIF1RX_CHAN4_SLOTS_MASK | + WM8996_AIF1RX_CHAN0_START_SLOT_MASK, + 1 << WM8996_AIF1RX_CHAN4_SLOTS_SHIFT | 0); + snd_soc_update_bits(codec, WM8996_AIF1RX_CHANNEL_5_CONFIGURATION, + WM8996_AIF1RX_CHAN5_SLOTS_MASK | + WM8996_AIF1RX_CHAN0_START_SLOT_MASK, + 1 << WM8996_AIF1RX_CHAN5_SLOTS_SHIFT | 1); + + snd_soc_update_bits(codec, WM8996_AIF2RX_CHANNEL_0_CONFIGURATION, + WM8996_AIF2RX_CHAN0_SLOTS_MASK | + WM8996_AIF2RX_CHAN0_START_SLOT_MASK, + 1 << WM8996_AIF2RX_CHAN0_SLOTS_SHIFT | 0); + snd_soc_update_bits(codec, WM8996_AIF2RX_CHANNEL_1_CONFIGURATION, + WM8996_AIF2RX_CHAN1_SLOTS_MASK | + WM8996_AIF2RX_CHAN1_START_SLOT_MASK, + 1 << WM8996_AIF2RX_CHAN1_SLOTS_SHIFT | 1); + + snd_soc_update_bits(codec, WM8996_AIF1TX_CHANNEL_0_CONFIGURATION, + WM8996_AIF1TX_CHAN0_SLOTS_MASK | + WM8996_AIF1TX_CHAN0_START_SLOT_MASK, + 1 << WM8996_AIF1TX_CHAN0_SLOTS_SHIFT | 0); + snd_soc_update_bits(codec, WM8996_AIF1TX_CHANNEL_1_CONFIGURATION, + WM8996_AIF1TX_CHAN1_SLOTS_MASK | + WM8996_AIF1TX_CHAN0_START_SLOT_MASK, + 1 << WM8996_AIF1TX_CHAN1_SLOTS_SHIFT | 1); + snd_soc_update_bits(codec, WM8996_AIF1TX_CHANNEL_2_CONFIGURATION, + WM8996_AIF1TX_CHAN2_SLOTS_MASK | + WM8996_AIF1TX_CHAN0_START_SLOT_MASK, + 1 << WM8996_AIF1TX_CHAN2_SLOTS_SHIFT | 0); + snd_soc_update_bits(codec, WM8996_AIF1TX_CHANNEL_3_CONFIGURATION, + WM8996_AIF1TX_CHAN3_SLOTS_MASK | + WM8996_AIF1TX_CHAN0_START_SLOT_MASK, + 1 << WM8996_AIF1TX_CHAN3_SLOTS_SHIFT | 1); + snd_soc_update_bits(codec, WM8996_AIF1TX_CHANNEL_4_CONFIGURATION, + WM8996_AIF1TX_CHAN4_SLOTS_MASK | + WM8996_AIF1TX_CHAN0_START_SLOT_MASK, + 1 << WM8996_AIF1TX_CHAN4_SLOTS_SHIFT | 0); + snd_soc_update_bits(codec, WM8996_AIF1TX_CHANNEL_5_CONFIGURATION, + WM8996_AIF1TX_CHAN5_SLOTS_MASK | + WM8996_AIF1TX_CHAN0_START_SLOT_MASK, + 1 << WM8996_AIF1TX_CHAN5_SLOTS_SHIFT | 1); + + snd_soc_update_bits(codec, WM8996_AIF2TX_CHANNEL_0_CONFIGURATION, + WM8996_AIF2TX_CHAN0_SLOTS_MASK | + WM8996_AIF2TX_CHAN0_START_SLOT_MASK, + 1 << WM8996_AIF2TX_CHAN0_SLOTS_SHIFT | 0); + snd_soc_update_bits(codec, WM8996_AIF1TX_CHANNEL_1_CONFIGURATION, + WM8996_AIF2TX_CHAN1_SLOTS_MASK | + WM8996_AIF2TX_CHAN1_START_SLOT_MASK, + 1 << WM8996_AIF1TX_CHAN1_SLOTS_SHIFT | 1); + + if (wm8996->pdata.num_retune_mobile_cfgs) + wm8996_retune_mobile_pdata(codec); + else + snd_soc_add_controls(codec, wm8996_eq_controls, + ARRAY_SIZE(wm8996_eq_controls)); + + /* If the TX LRCLK pins are not in LRCLK mode configure the + * AIFs to source their clocks from the RX LRCLKs. + */ + if ((snd_soc_read(codec, WM8996_GPIO_1))) + snd_soc_update_bits(codec, WM8996_AIF1_TX_LRCLK_2, + WM8996_AIF1TX_LRCLK_MODE, + WM8996_AIF1TX_LRCLK_MODE); + + if ((snd_soc_read(codec, WM8996_GPIO_2))) + snd_soc_update_bits(codec, WM8996_AIF2_TX_LRCLK_2, + WM8996_AIF2TX_LRCLK_MODE, + WM8996_AIF2TX_LRCLK_MODE); + + regulator_bulk_disable(ARRAY_SIZE(wm8996->supplies), wm8996->supplies); + + wm8996_init_gpio(codec); + + if (i2c->irq) { + if (wm8996->pdata.irq_flags) + irq_flags = wm8996->pdata.irq_flags; + else + irq_flags = IRQF_TRIGGER_LOW; + + irq_flags |= IRQF_ONESHOT; + + if (irq_flags & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) + ret = request_threaded_irq(i2c->irq, NULL, + wm8996_edge_irq, + irq_flags, "wm8996", codec); + else + ret = request_threaded_irq(i2c->irq, NULL, wm8996_irq, + irq_flags, "wm8996", codec); + + if (ret == 0) { + /* Unmask the interrupt */ + snd_soc_update_bits(codec, WM8996_INTERRUPT_CONTROL, + WM8996_IM_IRQ, 0); + + /* Enable error reporting and DC servo status */ + snd_soc_update_bits(codec, + WM8996_INTERRUPT_STATUS_2_MASK, + WM8996_IM_DCS_DONE_23_EINT | + WM8996_IM_DCS_DONE_01_EINT | + WM8996_IM_FLL_LOCK_EINT | + WM8996_IM_FIFOS_ERR_EINT, + 0); + } else { + dev_err(codec->dev, "Failed to request IRQ: %d\n", + ret); + } + } + + return 0; + +err_enable: + if (wm8996->pdata.ldo_ena >= 0) + gpio_set_value_cansleep(wm8996->pdata.ldo_ena, 0); + + regulator_bulk_disable(ARRAY_SIZE(wm8996->supplies), wm8996->supplies); +err_get: + regulator_bulk_free(ARRAY_SIZE(wm8996->supplies), wm8996->supplies); +err: + return ret; +} + +static int wm8996_remove(struct snd_soc_codec *codec) +{ + struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec); + struct i2c_client *i2c = to_i2c_client(codec->dev); + int i; + + snd_soc_update_bits(codec, WM8996_INTERRUPT_CONTROL, + WM8996_IM_IRQ, WM8996_IM_IRQ); + + if (i2c->irq) + free_irq(i2c->irq, codec); + + wm8996_free_gpio(codec); + + for (i = 0; i < ARRAY_SIZE(wm8996->supplies); i++) + regulator_unregister_notifier(wm8996->supplies[i].consumer, + &wm8996->disable_nb[i]); + regulator_bulk_free(ARRAY_SIZE(wm8996->supplies), wm8996->supplies); + + return 0; +} + +static struct snd_soc_codec_driver soc_codec_dev_wm8996 = { + .probe = wm8996_probe, + .remove = wm8996_remove, + .set_bias_level = wm8996_set_bias_level, + .seq_notifier = wm8996_seq_notifier, + .reg_cache_size = WM8996_MAX_REGISTER + 1, + .reg_word_size = sizeof(u16), + .reg_cache_default = wm8996_reg, + .volatile_register = wm8996_volatile_register, + .readable_register = wm8996_readable_register, + .compress_type = SND_SOC_RBTREE_COMPRESSION, + .controls = wm8996_snd_controls, + .num_controls = ARRAY_SIZE(wm8996_snd_controls), + .dapm_widgets = wm8996_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(wm8996_dapm_widgets), + .dapm_routes = wm8996_dapm_routes, + .num_dapm_routes = ARRAY_SIZE(wm8996_dapm_routes), + .set_pll = wm8996_set_fll, +}; + +#define WM8996_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |\ + SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_48000) +#define WM8996_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE |\ + SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S24_LE |\ + SNDRV_PCM_FMTBIT_S32_LE) + +static struct snd_soc_dai_ops wm8996_dai_ops = { + .set_fmt = wm8996_set_fmt, + .hw_params = wm8996_hw_params, + .set_sysclk = wm8996_set_sysclk, +}; + +static struct snd_soc_dai_driver wm8996_dai[] = { + { + .name = "wm8996-aif1", + .playback = { + .stream_name = "AIF1 Playback", + .channels_min = 1, + .channels_max = 6, + .rates = WM8996_RATES, + .formats = WM8996_FORMATS, + }, + .capture = { + .stream_name = "AIF1 Capture", + .channels_min = 1, + .channels_max = 6, + .rates = WM8996_RATES, + .formats = WM8996_FORMATS, + }, + .ops = &wm8996_dai_ops, + }, + { + .name = "wm8996-aif2", + .playback = { + .stream_name = "AIF2 Playback", + .channels_min = 1, + .channels_max = 2, + .rates = WM8996_RATES, + .formats = WM8996_FORMATS, + }, + .capture = { + .stream_name = "AIF2 Capture", + .channels_min = 1, + .channels_max = 2, + .rates = WM8996_RATES, + .formats = WM8996_FORMATS, + }, + .ops = &wm8996_dai_ops, + }, +}; + +static __devinit int wm8996_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct wm8996_priv *wm8996; + int ret; + + wm8996 = kzalloc(sizeof(struct wm8996_priv), GFP_KERNEL); + if (wm8996 == NULL) + return -ENOMEM; + + i2c_set_clientdata(i2c, wm8996); + + if (dev_get_platdata(&i2c->dev)) + memcpy(&wm8996->pdata, dev_get_platdata(&i2c->dev), + sizeof(wm8996->pdata)); + + if (wm8996->pdata.ldo_ena > 0) { + ret = gpio_request_one(wm8996->pdata.ldo_ena, + GPIOF_OUT_INIT_LOW, "WM8996 ENA"); + if (ret < 0) { + dev_err(&i2c->dev, "Failed to request GPIO %d: %d\n", + wm8996->pdata.ldo_ena, ret); + goto err; + } + } + + ret = snd_soc_register_codec(&i2c->dev, + &soc_codec_dev_wm8996, wm8996_dai, + ARRAY_SIZE(wm8996_dai)); + if (ret < 0) + goto err_gpio; + + return ret; + +err_gpio: + if (wm8996->pdata.ldo_ena > 0) + gpio_free(wm8996->pdata.ldo_ena); +err: + kfree(wm8996); + + return ret; +} + +static __devexit int wm8996_i2c_remove(struct i2c_client *client) +{ + struct wm8996_priv *wm8996 = i2c_get_clientdata(client); + + snd_soc_unregister_codec(&client->dev); + if (wm8996->pdata.ldo_ena > 0) + gpio_free(wm8996->pdata.ldo_ena); + kfree(i2c_get_clientdata(client)); + return 0; +} + +static const struct i2c_device_id wm8996_i2c_id[] = { + { "wm8996", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, wm8996_i2c_id); + +static struct i2c_driver wm8996_i2c_driver = { + .driver = { + .name = "wm8996", + .owner = THIS_MODULE, + }, + .probe = wm8996_i2c_probe, + .remove = __devexit_p(wm8996_i2c_remove), + .id_table = wm8996_i2c_id, +}; + +static int __init wm8996_modinit(void) +{ + int ret; + + ret = i2c_add_driver(&wm8996_i2c_driver); + if (ret != 0) { + printk(KERN_ERR "Failed to register WM8996 I2C driver: %d\n", + ret); + } + + return ret; +} +module_init(wm8996_modinit); + +static void __exit wm8996_exit(void) +{ + i2c_del_driver(&wm8996_i2c_driver); +} +module_exit(wm8996_exit); + +MODULE_DESCRIPTION("ASoC WM8996 driver"); +MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/wm8996.h b/sound/soc/codecs/wm8996.h new file mode 100644 index 00000000000..0fde643194c --- /dev/null +++ b/sound/soc/codecs/wm8996.h @@ -0,0 +1,3717 @@ +/* + * wm8996.h - WM8996 audio codec interface + * + * Copyright 2011 Wolfson Microelectronics PLC. + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef _WM8996_H +#define _WM8996_H + +#define WM8996_SYSCLK_MCLK1 1 +#define WM8996_SYSCLK_MCLK2 2 +#define WM8996_SYSCLK_FLL 3 + +#define WM8996_FLL_MCLK1 1 +#define WM8996_FLL_MCLK2 2 +#define WM8996_FLL_DACLRCLK1 3 +#define WM8996_FLL_BCLK1 4 + +typedef void (*wm8996_polarity_fn)(struct snd_soc_codec *codec, int polarity); + +int wm8996_detect(struct snd_soc_codec *codec, struct snd_soc_jack *jack, + wm8996_polarity_fn polarity_cb); + +/* + * Register values. + */ +#define WM8996_SOFTWARE_RESET 0x00 +#define WM8996_POWER_MANAGEMENT_1 0x01 +#define WM8996_POWER_MANAGEMENT_2 0x02 +#define WM8996_POWER_MANAGEMENT_3 0x03 +#define WM8996_POWER_MANAGEMENT_4 0x04 +#define WM8996_POWER_MANAGEMENT_5 0x05 +#define WM8996_POWER_MANAGEMENT_6 0x06 +#define WM8996_POWER_MANAGEMENT_7 0x07 +#define WM8996_POWER_MANAGEMENT_8 0x08 +#define WM8996_LEFT_LINE_INPUT_VOLUME 0x10 +#define WM8996_RIGHT_LINE_INPUT_VOLUME 0x11 +#define WM8996_LINE_INPUT_CONTROL 0x12 +#define WM8996_DAC1_HPOUT1_VOLUME 0x15 +#define WM8996_DAC2_HPOUT2_VOLUME 0x16 +#define WM8996_DAC1_LEFT_VOLUME 0x18 +#define WM8996_DAC1_RIGHT_VOLUME 0x19 +#define WM8996_DAC2_LEFT_VOLUME 0x1A +#define WM8996_DAC2_RIGHT_VOLUME 0x1B +#define WM8996_OUTPUT1_LEFT_VOLUME 0x1C +#define WM8996_OUTPUT1_RIGHT_VOLUME 0x1D +#define WM8996_OUTPUT2_LEFT_VOLUME 0x1E +#define WM8996_OUTPUT2_RIGHT_VOLUME 0x1F +#define WM8996_MICBIAS_1 0x20 +#define WM8996_MICBIAS_2 0x21 +#define WM8996_LDO_1 0x28 +#define WM8996_LDO_2 0x29 +#define WM8996_ACCESSORY_DETECT_MODE_1 0x30 +#define WM8996_ACCESSORY_DETECT_MODE_2 0x31 +#define WM8996_HEADPHONE_DETECT_1 0x34 +#define WM8996_HEADPHONE_DETECT_2 0x35 +#define WM8996_MIC_DETECT_1 0x38 +#define WM8996_MIC_DETECT_2 0x39 +#define WM8996_MIC_DETECT_3 0x3A +#define WM8996_CHARGE_PUMP_1 0x40 +#define WM8996_CHARGE_PUMP_2 0x41 +#define WM8996_DC_SERVO_1 0x50 +#define WM8996_DC_SERVO_2 0x51 +#define WM8996_DC_SERVO_3 0x52 +#define WM8996_DC_SERVO_5 0x54 +#define WM8996_DC_SERVO_6 0x55 +#define WM8996_DC_SERVO_7 0x56 +#define WM8996_DC_SERVO_READBACK_0 0x57 +#define WM8996_ANALOGUE_HP_1 0x60 +#define WM8996_ANALOGUE_HP_2 0x61 +#define WM8996_CHIP_REVISION 0x100 +#define WM8996_CONTROL_INTERFACE_1 0x101 +#define WM8996_WRITE_SEQUENCER_CTRL_1 0x110 +#define WM8996_WRITE_SEQUENCER_CTRL_2 0x111 +#define WM8996_AIF_CLOCKING_1 0x200 +#define WM8996_AIF_CLOCKING_2 0x201 +#define WM8996_CLOCKING_1 0x208 +#define WM8996_CLOCKING_2 0x209 +#define WM8996_AIF_RATE 0x210 +#define WM8996_FLL_CONTROL_1 0x220 +#define WM8996_FLL_CONTROL_2 0x221 +#define WM8996_FLL_CONTROL_3 0x222 +#define WM8996_FLL_CONTROL_4 0x223 +#define WM8996_FLL_CONTROL_5 0x224 +#define WM8996_FLL_CONTROL_6 0x225 +#define WM8996_FLL_EFS_1 0x226 +#define WM8996_FLL_EFS_2 0x227 +#define WM8996_AIF1_CONTROL 0x300 +#define WM8996_AIF1_BCLK 0x301 +#define WM8996_AIF1_TX_LRCLK_1 0x302 +#define WM8996_AIF1_TX_LRCLK_2 0x303 +#define WM8996_AIF1_RX_LRCLK_1 0x304 +#define WM8996_AIF1_RX_LRCLK_2 0x305 +#define WM8996_AIF1TX_DATA_CONFIGURATION_1 0x306 +#define WM8996_AIF1TX_DATA_CONFIGURATION_2 0x307 +#define WM8996_AIF1RX_DATA_CONFIGURATION 0x308 +#define WM8996_AIF1TX_CHANNEL_0_CONFIGURATION 0x309 +#define WM8996_AIF1TX_CHANNEL_1_CONFIGURATION 0x30A +#define WM8996_AIF1TX_CHANNEL_2_CONFIGURATION 0x30B +#define WM8996_AIF1TX_CHANNEL_3_CONFIGURATION 0x30C +#define WM8996_AIF1TX_CHANNEL_4_CONFIGURATION 0x30D +#define WM8996_AIF1TX_CHANNEL_5_CONFIGURATION 0x30E +#define WM8996_AIF1RX_CHANNEL_0_CONFIGURATION 0x30F +#define WM8996_AIF1RX_CHANNEL_1_CONFIGURATION 0x310 +#define WM8996_AIF1RX_CHANNEL_2_CONFIGURATION 0x311 +#define WM8996_AIF1RX_CHANNEL_3_CONFIGURATION 0x312 +#define WM8996_AIF1RX_CHANNEL_4_CONFIGURATION 0x313 +#define WM8996_AIF1RX_CHANNEL_5_CONFIGURATION 0x314 +#define WM8996_AIF1RX_MONO_CONFIGURATION 0x315 +#define WM8996_AIF1TX_TEST 0x31A +#define WM8996_AIF2_CONTROL 0x320 +#define WM8996_AIF2_BCLK 0x321 +#define WM8996_AIF2_TX_LRCLK_1 0x322 +#define WM8996_AIF2_TX_LRCLK_2 0x323 +#define WM8996_AIF2_RX_LRCLK_1 0x324 +#define WM8996_AIF2_RX_LRCLK_2 0x325 +#define WM8996_AIF2TX_DATA_CONFIGURATION_1 0x326 +#define WM8996_AIF2TX_DATA_CONFIGURATION_2 0x327 +#define WM8996_AIF2RX_DATA_CONFIGURATION 0x328 +#define WM8996_AIF2TX_CHANNEL_0_CONFIGURATION 0x329 +#define WM8996_AIF2TX_CHANNEL_1_CONFIGURATION 0x32A +#define WM8996_AIF2RX_CHANNEL_0_CONFIGURATION 0x32B +#define WM8996_AIF2RX_CHANNEL_1_CONFIGURATION 0x32C +#define WM8996_AIF2RX_MONO_CONFIGURATION 0x32D +#define WM8996_AIF2TX_TEST 0x32F +#define WM8996_DSP1_TX_LEFT_VOLUME 0x400 +#define WM8996_DSP1_TX_RIGHT_VOLUME 0x401 +#define WM8996_DSP1_RX_LEFT_VOLUME 0x402 +#define WM8996_DSP1_RX_RIGHT_VOLUME 0x403 +#define WM8996_DSP1_TX_FILTERS 0x410 +#define WM8996_DSP1_RX_FILTERS_1 0x420 +#define WM8996_DSP1_RX_FILTERS_2 0x421 +#define WM8996_DSP1_DRC_1 0x440 +#define WM8996_DSP1_DRC_2 0x441 +#define WM8996_DSP1_DRC_3 0x442 +#define WM8996_DSP1_DRC_4 0x443 +#define WM8996_DSP1_DRC_5 0x444 +#define WM8996_DSP1_RX_EQ_GAINS_1 0x480 +#define WM8996_DSP1_RX_EQ_GAINS_2 0x481 +#define WM8996_DSP1_RX_EQ_BAND_1_A 0x482 +#define WM8996_DSP1_RX_EQ_BAND_1_B 0x483 +#define WM8996_DSP1_RX_EQ_BAND_1_PG 0x484 +#define WM8996_DSP1_RX_EQ_BAND_2_A 0x485 +#define WM8996_DSP1_RX_EQ_BAND_2_B 0x486 +#define WM8996_DSP1_RX_EQ_BAND_2_C 0x487 +#define WM8996_DSP1_RX_EQ_BAND_2_PG 0x488 +#define WM8996_DSP1_RX_EQ_BAND_3_A 0x489 +#define WM8996_DSP1_RX_EQ_BAND_3_B 0x48A +#define WM8996_DSP1_RX_EQ_BAND_3_C 0x48B +#define WM8996_DSP1_RX_EQ_BAND_3_PG 0x48C +#define WM8996_DSP1_RX_EQ_BAND_4_A 0x48D +#define WM8996_DSP1_RX_EQ_BAND_4_B 0x48E +#define WM8996_DSP1_RX_EQ_BAND_4_C 0x48F +#define WM8996_DSP1_RX_EQ_BAND_4_PG 0x490 +#define WM8996_DSP1_RX_EQ_BAND_5_A 0x491 +#define WM8996_DSP1_RX_EQ_BAND_5_B 0x492 +#define WM8996_DSP1_RX_EQ_BAND_5_PG 0x493 +#define WM8996_DSP2_TX_LEFT_VOLUME 0x500 +#define WM8996_DSP2_TX_RIGHT_VOLUME 0x501 +#define WM8996_DSP2_RX_LEFT_VOLUME 0x502 +#define WM8996_DSP2_RX_RIGHT_VOLUME 0x503 +#define WM8996_DSP2_TX_FILTERS 0x510 +#define WM8996_DSP2_RX_FILTERS_1 0x520 +#define WM8996_DSP2_RX_FILTERS_2 0x521 +#define WM8996_DSP2_DRC_1 0x540 +#define WM8996_DSP2_DRC_2 0x541 +#define WM8996_DSP2_DRC_3 0x542 +#define WM8996_DSP2_DRC_4 0x543 +#define WM8996_DSP2_DRC_5 0x544 +#define WM8996_DSP2_RX_EQ_GAINS_1 0x580 +#define WM8996_DSP2_RX_EQ_GAINS_2 0x581 +#define WM8996_DSP2_RX_EQ_BAND_1_A 0x582 +#define WM8996_DSP2_RX_EQ_BAND_1_B 0x583 +#define WM8996_DSP2_RX_EQ_BAND_1_PG 0x584 +#define WM8996_DSP2_RX_EQ_BAND_2_A 0x585 +#define WM8996_DSP2_RX_EQ_BAND_2_B 0x586 +#define WM8996_DSP2_RX_EQ_BAND_2_C 0x587 +#define WM8996_DSP2_RX_EQ_BAND_2_PG 0x588 +#define WM8996_DSP2_RX_EQ_BAND_3_A 0x589 +#define WM8996_DSP2_RX_EQ_BAND_3_B 0x58A +#define WM8996_DSP2_RX_EQ_BAND_3_C 0x58B +#define WM8996_DSP2_RX_EQ_BAND_3_PG 0x58C +#define WM8996_DSP2_RX_EQ_BAND_4_A 0x58D +#define WM8996_DSP2_RX_EQ_BAND_4_B 0x58E +#define WM8996_DSP2_RX_EQ_BAND_4_C 0x58F +#define WM8996_DSP2_RX_EQ_BAND_4_PG 0x590 +#define WM8996_DSP2_RX_EQ_BAND_5_A 0x591 +#define WM8996_DSP2_RX_EQ_BAND_5_B 0x592 +#define WM8996_DSP2_RX_EQ_BAND_5_PG 0x593 +#define WM8996_DAC1_MIXER_VOLUMES 0x600 +#define WM8996_DAC1_LEFT_MIXER_ROUTING 0x601 +#define WM8996_DAC1_RIGHT_MIXER_ROUTING 0x602 +#define WM8996_DAC2_MIXER_VOLUMES 0x603 +#define WM8996_DAC2_LEFT_MIXER_ROUTING 0x604 +#define WM8996_DAC2_RIGHT_MIXER_ROUTING 0x605 +#define WM8996_DSP1_TX_LEFT_MIXER_ROUTING 0x606 +#define WM8996_DSP1_TX_RIGHT_MIXER_ROUTING 0x607 +#define WM8996_DSP2_TX_LEFT_MIXER_ROUTING 0x608 +#define WM8996_DSP2_TX_RIGHT_MIXER_ROUTING 0x609 +#define WM8996_DSP_TX_MIXER_SELECT 0x60A +#define WM8996_DAC_SOFTMUTE 0x610 +#define WM8996_OVERSAMPLING 0x620 +#define WM8996_SIDETONE 0x621 +#define WM8996_GPIO_1 0x700 +#define WM8996_GPIO_2 0x701 +#define WM8996_GPIO_3 0x702 +#define WM8996_GPIO_4 0x703 +#define WM8996_GPIO_5 0x704 +#define WM8996_PULL_CONTROL_1 0x720 +#define WM8996_PULL_CONTROL_2 0x721 +#define WM8996_INTERRUPT_STATUS_1 0x730 +#define WM8996_INTERRUPT_STATUS_2 0x731 +#define WM8996_INTERRUPT_RAW_STATUS_2 0x732 +#define WM8996_INTERRUPT_STATUS_1_MASK 0x738 +#define WM8996_INTERRUPT_STATUS_2_MASK 0x739 +#define WM8996_INTERRUPT_CONTROL 0x740 +#define WM8996_LEFT_PDM_SPEAKER 0x800 +#define WM8996_RIGHT_PDM_SPEAKER 0x801 +#define WM8996_PDM_SPEAKER_MUTE_SEQUENCE 0x802 +#define WM8996_PDM_SPEAKER_VOLUME 0x803 +#define WM8996_WRITE_SEQUENCER_0 0x3000 +#define WM8996_WRITE_SEQUENCER_1 0x3001 +#define WM8996_WRITE_SEQUENCER_2 0x3002 +#define WM8996_WRITE_SEQUENCER_3 0x3003 +#define WM8996_WRITE_SEQUENCER_4 0x3004 +#define WM8996_WRITE_SEQUENCER_5 0x3005 +#define WM8996_WRITE_SEQUENCER_6 0x3006 +#define WM8996_WRITE_SEQUENCER_7 0x3007 +#define WM8996_WRITE_SEQUENCER_8 0x3008 +#define WM8996_WRITE_SEQUENCER_9 0x3009 +#define WM8996_WRITE_SEQUENCER_10 0x300A +#define WM8996_WRITE_SEQUENCER_11 0x300B +#define WM8996_WRITE_SEQUENCER_12 0x300C +#define WM8996_WRITE_SEQUENCER_13 0x300D +#define WM8996_WRITE_SEQUENCER_14 0x300E +#define WM8996_WRITE_SEQUENCER_15 0x300F +#define WM8996_WRITE_SEQUENCER_16 0x3010 +#define WM8996_WRITE_SEQUENCER_17 0x3011 +#define WM8996_WRITE_SEQUENCER_18 0x3012 +#define WM8996_WRITE_SEQUENCER_19 0x3013 +#define WM8996_WRITE_SEQUENCER_20 0x3014 +#define WM8996_WRITE_SEQUENCER_21 0x3015 +#define WM8996_WRITE_SEQUENCER_22 0x3016 +#define WM8996_WRITE_SEQUENCER_23 0x3017 +#define WM8996_WRITE_SEQUENCER_24 0x3018 +#define WM8996_WRITE_SEQUENCER_25 0x3019 +#define WM8996_WRITE_SEQUENCER_26 0x301A +#define WM8996_WRITE_SEQUENCER_27 0x301B +#define WM8996_WRITE_SEQUENCER_28 0x301C +#define WM8996_WRITE_SEQUENCER_29 0x301D +#define WM8996_WRITE_SEQUENCER_30 0x301E +#define WM8996_WRITE_SEQUENCER_31 0x301F +#define WM8996_WRITE_SEQUENCER_32 0x3020 +#define WM8996_WRITE_SEQUENCER_33 0x3021 +#define WM8996_WRITE_SEQUENCER_34 0x3022 +#define WM8996_WRITE_SEQUENCER_35 0x3023 +#define WM8996_WRITE_SEQUENCER_36 0x3024 +#define WM8996_WRITE_SEQUENCER_37 0x3025 +#define WM8996_WRITE_SEQUENCER_38 0x3026 +#define WM8996_WRITE_SEQUENCER_39 0x3027 +#define WM8996_WRITE_SEQUENCER_40 0x3028 +#define WM8996_WRITE_SEQUENCER_41 0x3029 +#define WM8996_WRITE_SEQUENCER_42 0x302A +#define WM8996_WRITE_SEQUENCER_43 0x302B +#define WM8996_WRITE_SEQUENCER_44 0x302C +#define WM8996_WRITE_SEQUENCER_45 0x302D +#define WM8996_WRITE_SEQUENCER_46 0x302E +#define WM8996_WRITE_SEQUENCER_47 0x302F +#define WM8996_WRITE_SEQUENCER_48 0x3030 +#define WM8996_WRITE_SEQUENCER_49 0x3031 +#define WM8996_WRITE_SEQUENCER_50 0x3032 +#define WM8996_WRITE_SEQUENCER_51 0x3033 +#define WM8996_WRITE_SEQUENCER_52 0x3034 +#define WM8996_WRITE_SEQUENCER_53 0x3035 +#define WM8996_WRITE_SEQUENCER_54 0x3036 +#define WM8996_WRITE_SEQUENCER_55 0x3037 +#define WM8996_WRITE_SEQUENCER_56 0x3038 +#define WM8996_WRITE_SEQUENCER_57 0x3039 +#define WM8996_WRITE_SEQUENCER_58 0x303A +#define WM8996_WRITE_SEQUENCER_59 0x303B +#define WM8996_WRITE_SEQUENCER_60 0x303C +#define WM8996_WRITE_SEQUENCER_61 0x303D +#define WM8996_WRITE_SEQUENCER_62 0x303E +#define WM8996_WRITE_SEQUENCER_63 0x303F +#define WM8996_WRITE_SEQUENCER_64 0x3040 +#define WM8996_WRITE_SEQUENCER_65 0x3041 +#define WM8996_WRITE_SEQUENCER_66 0x3042 +#define WM8996_WRITE_SEQUENCER_67 0x3043 +#define WM8996_WRITE_SEQUENCER_68 0x3044 +#define WM8996_WRITE_SEQUENCER_69 0x3045 +#define WM8996_WRITE_SEQUENCER_70 0x3046 +#define WM8996_WRITE_SEQUENCER_71 0x3047 +#define WM8996_WRITE_SEQUENCER_72 0x3048 +#define WM8996_WRITE_SEQUENCER_73 0x3049 +#define WM8996_WRITE_SEQUENCER_74 0x304A +#define WM8996_WRITE_SEQUENCER_75 0x304B +#define WM8996_WRITE_SEQUENCER_76 0x304C +#define WM8996_WRITE_SEQUENCER_77 0x304D +#define WM8996_WRITE_SEQUENCER_78 0x304E +#define WM8996_WRITE_SEQUENCER_79 0x304F +#define WM8996_WRITE_SEQUENCER_80 0x3050 +#define WM8996_WRITE_SEQUENCER_81 0x3051 +#define WM8996_WRITE_SEQUENCER_82 0x3052 +#define WM8996_WRITE_SEQUENCER_83 0x3053 +#define WM8996_WRITE_SEQUENCER_84 0x3054 +#define WM8996_WRITE_SEQUENCER_85 0x3055 +#define WM8996_WRITE_SEQUENCER_86 0x3056 +#define WM8996_WRITE_SEQUENCER_87 0x3057 +#define WM8996_WRITE_SEQUENCER_88 0x3058 +#define WM8996_WRITE_SEQUENCER_89 0x3059 +#define WM8996_WRITE_SEQUENCER_90 0x305A +#define WM8996_WRITE_SEQUENCER_91 0x305B +#define WM8996_WRITE_SEQUENCER_92 0x305C +#define WM8996_WRITE_SEQUENCER_93 0x305D +#define WM8996_WRITE_SEQUENCER_94 0x305E +#define WM8996_WRITE_SEQUENCER_95 0x305F +#define WM8996_WRITE_SEQUENCER_96 0x3060 +#define WM8996_WRITE_SEQUENCER_97 0x3061 +#define WM8996_WRITE_SEQUENCER_98 0x3062 +#define WM8996_WRITE_SEQUENCER_99 0x3063 +#define WM8996_WRITE_SEQUENCER_100 0x3064 +#define WM8996_WRITE_SEQUENCER_101 0x3065 +#define WM8996_WRITE_SEQUENCER_102 0x3066 +#define WM8996_WRITE_SEQUENCER_103 0x3067 +#define WM8996_WRITE_SEQUENCER_104 0x3068 +#define WM8996_WRITE_SEQUENCER_105 0x3069 +#define WM8996_WRITE_SEQUENCER_106 0x306A +#define WM8996_WRITE_SEQUENCER_107 0x306B +#define WM8996_WRITE_SEQUENCER_108 0x306C +#define WM8996_WRITE_SEQUENCER_109 0x306D +#define WM8996_WRITE_SEQUENCER_110 0x306E +#define WM8996_WRITE_SEQUENCER_111 0x306F +#define WM8996_WRITE_SEQUENCER_112 0x3070 +#define WM8996_WRITE_SEQUENCER_113 0x3071 +#define WM8996_WRITE_SEQUENCER_114 0x3072 +#define WM8996_WRITE_SEQUENCER_115 0x3073 +#define WM8996_WRITE_SEQUENCER_116 0x3074 +#define WM8996_WRITE_SEQUENCER_117 0x3075 +#define WM8996_WRITE_SEQUENCER_118 0x3076 +#define WM8996_WRITE_SEQUENCER_119 0x3077 +#define WM8996_WRITE_SEQUENCER_120 0x3078 +#define WM8996_WRITE_SEQUENCER_121 0x3079 +#define WM8996_WRITE_SEQUENCER_122 0x307A +#define WM8996_WRITE_SEQUENCER_123 0x307B +#define WM8996_WRITE_SEQUENCER_124 0x307C +#define WM8996_WRITE_SEQUENCER_125 0x307D +#define WM8996_WRITE_SEQUENCER_126 0x307E +#define WM8996_WRITE_SEQUENCER_127 0x307F +#define WM8996_WRITE_SEQUENCER_128 0x3080 +#define WM8996_WRITE_SEQUENCER_129 0x3081 +#define WM8996_WRITE_SEQUENCER_130 0x3082 +#define WM8996_WRITE_SEQUENCER_131 0x3083 +#define WM8996_WRITE_SEQUENCER_132 0x3084 +#define WM8996_WRITE_SEQUENCER_133 0x3085 +#define WM8996_WRITE_SEQUENCER_134 0x3086 +#define WM8996_WRITE_SEQUENCER_135 0x3087 +#define WM8996_WRITE_SEQUENCER_136 0x3088 +#define WM8996_WRITE_SEQUENCER_137 0x3089 +#define WM8996_WRITE_SEQUENCER_138 0x308A +#define WM8996_WRITE_SEQUENCER_139 0x308B +#define WM8996_WRITE_SEQUENCER_140 0x308C +#define WM8996_WRITE_SEQUENCER_141 0x308D +#define WM8996_WRITE_SEQUENCER_142 0x308E +#define WM8996_WRITE_SEQUENCER_143 0x308F +#define WM8996_WRITE_SEQUENCER_144 0x3090 +#define WM8996_WRITE_SEQUENCER_145 0x3091 +#define WM8996_WRITE_SEQUENCER_146 0x3092 +#define WM8996_WRITE_SEQUENCER_147 0x3093 +#define WM8996_WRITE_SEQUENCER_148 0x3094 +#define WM8996_WRITE_SEQUENCER_149 0x3095 +#define WM8996_WRITE_SEQUENCER_150 0x3096 +#define WM8996_WRITE_SEQUENCER_151 0x3097 +#define WM8996_WRITE_SEQUENCER_152 0x3098 +#define WM8996_WRITE_SEQUENCER_153 0x3099 +#define WM8996_WRITE_SEQUENCER_154 0x309A +#define WM8996_WRITE_SEQUENCER_155 0x309B +#define WM8996_WRITE_SEQUENCER_156 0x309C +#define WM8996_WRITE_SEQUENCER_157 0x309D +#define WM8996_WRITE_SEQUENCER_158 0x309E +#define WM8996_WRITE_SEQUENCER_159 0x309F +#define WM8996_WRITE_SEQUENCER_160 0x30A0 +#define WM8996_WRITE_SEQUENCER_161 0x30A1 +#define WM8996_WRITE_SEQUENCER_162 0x30A2 +#define WM8996_WRITE_SEQUENCER_163 0x30A3 +#define WM8996_WRITE_SEQUENCER_164 0x30A4 +#define WM8996_WRITE_SEQUENCER_165 0x30A5 +#define WM8996_WRITE_SEQUENCER_166 0x30A6 +#define WM8996_WRITE_SEQUENCER_167 0x30A7 +#define WM8996_WRITE_SEQUENCER_168 0x30A8 +#define WM8996_WRITE_SEQUENCER_169 0x30A9 +#define WM8996_WRITE_SEQUENCER_170 0x30AA +#define WM8996_WRITE_SEQUENCER_171 0x30AB +#define WM8996_WRITE_SEQUENCER_172 0x30AC +#define WM8996_WRITE_SEQUENCER_173 0x30AD +#define WM8996_WRITE_SEQUENCER_174 0x30AE +#define WM8996_WRITE_SEQUENCER_175 0x30AF +#define WM8996_WRITE_SEQUENCER_176 0x30B0 +#define WM8996_WRITE_SEQUENCER_177 0x30B1 +#define WM8996_WRITE_SEQUENCER_178 0x30B2 +#define WM8996_WRITE_SEQUENCER_179 0x30B3 +#define WM8996_WRITE_SEQUENCER_180 0x30B4 +#define WM8996_WRITE_SEQUENCER_181 0x30B5 +#define WM8996_WRITE_SEQUENCER_182 0x30B6 +#define WM8996_WRITE_SEQUENCER_183 0x30B7 +#define WM8996_WRITE_SEQUENCER_184 0x30B8 +#define WM8996_WRITE_SEQUENCER_185 0x30B9 +#define WM8996_WRITE_SEQUENCER_186 0x30BA +#define WM8996_WRITE_SEQUENCER_187 0x30BB +#define WM8996_WRITE_SEQUENCER_188 0x30BC +#define WM8996_WRITE_SEQUENCER_189 0x30BD +#define WM8996_WRITE_SEQUENCER_190 0x30BE +#define WM8996_WRITE_SEQUENCER_191 0x30BF +#define WM8996_WRITE_SEQUENCER_192 0x30C0 +#define WM8996_WRITE_SEQUENCER_193 0x30C1 +#define WM8996_WRITE_SEQUENCER_194 0x30C2 +#define WM8996_WRITE_SEQUENCER_195 0x30C3 +#define WM8996_WRITE_SEQUENCER_196 0x30C4 +#define WM8996_WRITE_SEQUENCER_197 0x30C5 +#define WM8996_WRITE_SEQUENCER_198 0x30C6 +#define WM8996_WRITE_SEQUENCER_199 0x30C7 +#define WM8996_WRITE_SEQUENCER_200 0x30C8 +#define WM8996_WRITE_SEQUENCER_201 0x30C9 +#define WM8996_WRITE_SEQUENCER_202 0x30CA +#define WM8996_WRITE_SEQUENCER_203 0x30CB +#define WM8996_WRITE_SEQUENCER_204 0x30CC +#define WM8996_WRITE_SEQUENCER_205 0x30CD +#define WM8996_WRITE_SEQUENCER_206 0x30CE +#define WM8996_WRITE_SEQUENCER_207 0x30CF +#define WM8996_WRITE_SEQUENCER_208 0x30D0 +#define WM8996_WRITE_SEQUENCER_209 0x30D1 +#define WM8996_WRITE_SEQUENCER_210 0x30D2 +#define WM8996_WRITE_SEQUENCER_211 0x30D3 +#define WM8996_WRITE_SEQUENCER_212 0x30D4 +#define WM8996_WRITE_SEQUENCER_213 0x30D5 +#define WM8996_WRITE_SEQUENCER_214 0x30D6 +#define WM8996_WRITE_SEQUENCER_215 0x30D7 +#define WM8996_WRITE_SEQUENCER_216 0x30D8 +#define WM8996_WRITE_SEQUENCER_217 0x30D9 +#define WM8996_WRITE_SEQUENCER_218 0x30DA +#define WM8996_WRITE_SEQUENCER_219 0x30DB +#define WM8996_WRITE_SEQUENCER_220 0x30DC +#define WM8996_WRITE_SEQUENCER_221 0x30DD +#define WM8996_WRITE_SEQUENCER_222 0x30DE +#define WM8996_WRITE_SEQUENCER_223 0x30DF +#define WM8996_WRITE_SEQUENCER_224 0x30E0 +#define WM8996_WRITE_SEQUENCER_225 0x30E1 +#define WM8996_WRITE_SEQUENCER_226 0x30E2 +#define WM8996_WRITE_SEQUENCER_227 0x30E3 +#define WM8996_WRITE_SEQUENCER_228 0x30E4 +#define WM8996_WRITE_SEQUENCER_229 0x30E5 +#define WM8996_WRITE_SEQUENCER_230 0x30E6 +#define WM8996_WRITE_SEQUENCER_231 0x30E7 +#define WM8996_WRITE_SEQUENCER_232 0x30E8 +#define WM8996_WRITE_SEQUENCER_233 0x30E9 +#define WM8996_WRITE_SEQUENCER_234 0x30EA +#define WM8996_WRITE_SEQUENCER_235 0x30EB +#define WM8996_WRITE_SEQUENCER_236 0x30EC +#define WM8996_WRITE_SEQUENCER_237 0x30ED +#define WM8996_WRITE_SEQUENCER_238 0x30EE +#define WM8996_WRITE_SEQUENCER_239 0x30EF +#define WM8996_WRITE_SEQUENCER_240 0x30F0 +#define WM8996_WRITE_SEQUENCER_241 0x30F1 +#define WM8996_WRITE_SEQUENCER_242 0x30F2 +#define WM8996_WRITE_SEQUENCER_243 0x30F3 +#define WM8996_WRITE_SEQUENCER_244 0x30F4 +#define WM8996_WRITE_SEQUENCER_245 0x30F5 +#define WM8996_WRITE_SEQUENCER_246 0x30F6 +#define WM8996_WRITE_SEQUENCER_247 0x30F7 +#define WM8996_WRITE_SEQUENCER_248 0x30F8 +#define WM8996_WRITE_SEQUENCER_249 0x30F9 +#define WM8996_WRITE_SEQUENCER_250 0x30FA +#define WM8996_WRITE_SEQUENCER_251 0x30FB +#define WM8996_WRITE_SEQUENCER_252 0x30FC +#define WM8996_WRITE_SEQUENCER_253 0x30FD +#define WM8996_WRITE_SEQUENCER_254 0x30FE +#define WM8996_WRITE_SEQUENCER_255 0x30FF +#define WM8996_WRITE_SEQUENCER_256 0x3100 +#define WM8996_WRITE_SEQUENCER_257 0x3101 +#define WM8996_WRITE_SEQUENCER_258 0x3102 +#define WM8996_WRITE_SEQUENCER_259 0x3103 +#define WM8996_WRITE_SEQUENCER_260 0x3104 +#define WM8996_WRITE_SEQUENCER_261 0x3105 +#define WM8996_WRITE_SEQUENCER_262 0x3106 +#define WM8996_WRITE_SEQUENCER_263 0x3107 +#define WM8996_WRITE_SEQUENCER_264 0x3108 +#define WM8996_WRITE_SEQUENCER_265 0x3109 +#define WM8996_WRITE_SEQUENCER_266 0x310A +#define WM8996_WRITE_SEQUENCER_267 0x310B +#define WM8996_WRITE_SEQUENCER_268 0x310C +#define WM8996_WRITE_SEQUENCER_269 0x310D +#define WM8996_WRITE_SEQUENCER_270 0x310E +#define WM8996_WRITE_SEQUENCER_271 0x310F +#define WM8996_WRITE_SEQUENCER_272 0x3110 +#define WM8996_WRITE_SEQUENCER_273 0x3111 +#define WM8996_WRITE_SEQUENCER_274 0x3112 +#define WM8996_WRITE_SEQUENCER_275 0x3113 +#define WM8996_WRITE_SEQUENCER_276 0x3114 +#define WM8996_WRITE_SEQUENCER_277 0x3115 +#define WM8996_WRITE_SEQUENCER_278 0x3116 +#define WM8996_WRITE_SEQUENCER_279 0x3117 +#define WM8996_WRITE_SEQUENCER_280 0x3118 +#define WM8996_WRITE_SEQUENCER_281 0x3119 +#define WM8996_WRITE_SEQUENCER_282 0x311A +#define WM8996_WRITE_SEQUENCER_283 0x311B +#define WM8996_WRITE_SEQUENCER_284 0x311C +#define WM8996_WRITE_SEQUENCER_285 0x311D +#define WM8996_WRITE_SEQUENCER_286 0x311E +#define WM8996_WRITE_SEQUENCER_287 0x311F +#define WM8996_WRITE_SEQUENCER_288 0x3120 +#define WM8996_WRITE_SEQUENCER_289 0x3121 +#define WM8996_WRITE_SEQUENCER_290 0x3122 +#define WM8996_WRITE_SEQUENCER_291 0x3123 +#define WM8996_WRITE_SEQUENCER_292 0x3124 +#define WM8996_WRITE_SEQUENCER_293 0x3125 +#define WM8996_WRITE_SEQUENCER_294 0x3126 +#define WM8996_WRITE_SEQUENCER_295 0x3127 +#define WM8996_WRITE_SEQUENCER_296 0x3128 +#define WM8996_WRITE_SEQUENCER_297 0x3129 +#define WM8996_WRITE_SEQUENCER_298 0x312A +#define WM8996_WRITE_SEQUENCER_299 0x312B +#define WM8996_WRITE_SEQUENCER_300 0x312C +#define WM8996_WRITE_SEQUENCER_301 0x312D +#define WM8996_WRITE_SEQUENCER_302 0x312E +#define WM8996_WRITE_SEQUENCER_303 0x312F +#define WM8996_WRITE_SEQUENCER_304 0x3130 +#define WM8996_WRITE_SEQUENCER_305 0x3131 +#define WM8996_WRITE_SEQUENCER_306 0x3132 +#define WM8996_WRITE_SEQUENCER_307 0x3133 +#define WM8996_WRITE_SEQUENCER_308 0x3134 +#define WM8996_WRITE_SEQUENCER_309 0x3135 +#define WM8996_WRITE_SEQUENCER_310 0x3136 +#define WM8996_WRITE_SEQUENCER_311 0x3137 +#define WM8996_WRITE_SEQUENCER_312 0x3138 +#define WM8996_WRITE_SEQUENCER_313 0x3139 +#define WM8996_WRITE_SEQUENCER_314 0x313A +#define WM8996_WRITE_SEQUENCER_315 0x313B +#define WM8996_WRITE_SEQUENCER_316 0x313C +#define WM8996_WRITE_SEQUENCER_317 0x313D +#define WM8996_WRITE_SEQUENCER_318 0x313E +#define WM8996_WRITE_SEQUENCER_319 0x313F +#define WM8996_WRITE_SEQUENCER_320 0x3140 +#define WM8996_WRITE_SEQUENCER_321 0x3141 +#define WM8996_WRITE_SEQUENCER_322 0x3142 +#define WM8996_WRITE_SEQUENCER_323 0x3143 +#define WM8996_WRITE_SEQUENCER_324 0x3144 +#define WM8996_WRITE_SEQUENCER_325 0x3145 +#define WM8996_WRITE_SEQUENCER_326 0x3146 +#define WM8996_WRITE_SEQUENCER_327 0x3147 +#define WM8996_WRITE_SEQUENCER_328 0x3148 +#define WM8996_WRITE_SEQUENCER_329 0x3149 +#define WM8996_WRITE_SEQUENCER_330 0x314A +#define WM8996_WRITE_SEQUENCER_331 0x314B +#define WM8996_WRITE_SEQUENCER_332 0x314C +#define WM8996_WRITE_SEQUENCER_333 0x314D +#define WM8996_WRITE_SEQUENCER_334 0x314E +#define WM8996_WRITE_SEQUENCER_335 0x314F +#define WM8996_WRITE_SEQUENCER_336 0x3150 +#define WM8996_WRITE_SEQUENCER_337 0x3151 +#define WM8996_WRITE_SEQUENCER_338 0x3152 +#define WM8996_WRITE_SEQUENCER_339 0x3153 +#define WM8996_WRITE_SEQUENCER_340 0x3154 +#define WM8996_WRITE_SEQUENCER_341 0x3155 +#define WM8996_WRITE_SEQUENCER_342 0x3156 +#define WM8996_WRITE_SEQUENCER_343 0x3157 +#define WM8996_WRITE_SEQUENCER_344 0x3158 +#define WM8996_WRITE_SEQUENCER_345 0x3159 +#define WM8996_WRITE_SEQUENCER_346 0x315A +#define WM8996_WRITE_SEQUENCER_347 0x315B +#define WM8996_WRITE_SEQUENCER_348 0x315C +#define WM8996_WRITE_SEQUENCER_349 0x315D +#define WM8996_WRITE_SEQUENCER_350 0x315E +#define WM8996_WRITE_SEQUENCER_351 0x315F +#define WM8996_WRITE_SEQUENCER_352 0x3160 +#define WM8996_WRITE_SEQUENCER_353 0x3161 +#define WM8996_WRITE_SEQUENCER_354 0x3162 +#define WM8996_WRITE_SEQUENCER_355 0x3163 +#define WM8996_WRITE_SEQUENCER_356 0x3164 +#define WM8996_WRITE_SEQUENCER_357 0x3165 +#define WM8996_WRITE_SEQUENCER_358 0x3166 +#define WM8996_WRITE_SEQUENCER_359 0x3167 +#define WM8996_WRITE_SEQUENCER_360 0x3168 +#define WM8996_WRITE_SEQUENCER_361 0x3169 +#define WM8996_WRITE_SEQUENCER_362 0x316A +#define WM8996_WRITE_SEQUENCER_363 0x316B +#define WM8996_WRITE_SEQUENCER_364 0x316C +#define WM8996_WRITE_SEQUENCER_365 0x316D +#define WM8996_WRITE_SEQUENCER_366 0x316E +#define WM8996_WRITE_SEQUENCER_367 0x316F +#define WM8996_WRITE_SEQUENCER_368 0x3170 +#define WM8996_WRITE_SEQUENCER_369 0x3171 +#define WM8996_WRITE_SEQUENCER_370 0x3172 +#define WM8996_WRITE_SEQUENCER_371 0x3173 +#define WM8996_WRITE_SEQUENCER_372 0x3174 +#define WM8996_WRITE_SEQUENCER_373 0x3175 +#define WM8996_WRITE_SEQUENCER_374 0x3176 +#define WM8996_WRITE_SEQUENCER_375 0x3177 +#define WM8996_WRITE_SEQUENCER_376 0x3178 +#define WM8996_WRITE_SEQUENCER_377 0x3179 +#define WM8996_WRITE_SEQUENCER_378 0x317A +#define WM8996_WRITE_SEQUENCER_379 0x317B +#define WM8996_WRITE_SEQUENCER_380 0x317C +#define WM8996_WRITE_SEQUENCER_381 0x317D +#define WM8996_WRITE_SEQUENCER_382 0x317E +#define WM8996_WRITE_SEQUENCER_383 0x317F +#define WM8996_WRITE_SEQUENCER_384 0x3180 +#define WM8996_WRITE_SEQUENCER_385 0x3181 +#define WM8996_WRITE_SEQUENCER_386 0x3182 +#define WM8996_WRITE_SEQUENCER_387 0x3183 +#define WM8996_WRITE_SEQUENCER_388 0x3184 +#define WM8996_WRITE_SEQUENCER_389 0x3185 +#define WM8996_WRITE_SEQUENCER_390 0x3186 +#define WM8996_WRITE_SEQUENCER_391 0x3187 +#define WM8996_WRITE_SEQUENCER_392 0x3188 +#define WM8996_WRITE_SEQUENCER_393 0x3189 +#define WM8996_WRITE_SEQUENCER_394 0x318A +#define WM8996_WRITE_SEQUENCER_395 0x318B +#define WM8996_WRITE_SEQUENCER_396 0x318C +#define WM8996_WRITE_SEQUENCER_397 0x318D +#define WM8996_WRITE_SEQUENCER_398 0x318E +#define WM8996_WRITE_SEQUENCER_399 0x318F +#define WM8996_WRITE_SEQUENCER_400 0x3190 +#define WM8996_WRITE_SEQUENCER_401 0x3191 +#define WM8996_WRITE_SEQUENCER_402 0x3192 +#define WM8996_WRITE_SEQUENCER_403 0x3193 +#define WM8996_WRITE_SEQUENCER_404 0x3194 +#define WM8996_WRITE_SEQUENCER_405 0x3195 +#define WM8996_WRITE_SEQUENCER_406 0x3196 +#define WM8996_WRITE_SEQUENCER_407 0x3197 +#define WM8996_WRITE_SEQUENCER_408 0x3198 +#define WM8996_WRITE_SEQUENCER_409 0x3199 +#define WM8996_WRITE_SEQUENCER_410 0x319A +#define WM8996_WRITE_SEQUENCER_411 0x319B +#define WM8996_WRITE_SEQUENCER_412 0x319C +#define WM8996_WRITE_SEQUENCER_413 0x319D +#define WM8996_WRITE_SEQUENCER_414 0x319E +#define WM8996_WRITE_SEQUENCER_415 0x319F +#define WM8996_WRITE_SEQUENCER_416 0x31A0 +#define WM8996_WRITE_SEQUENCER_417 0x31A1 +#define WM8996_WRITE_SEQUENCER_418 0x31A2 +#define WM8996_WRITE_SEQUENCER_419 0x31A3 +#define WM8996_WRITE_SEQUENCER_420 0x31A4 +#define WM8996_WRITE_SEQUENCER_421 0x31A5 +#define WM8996_WRITE_SEQUENCER_422 0x31A6 +#define WM8996_WRITE_SEQUENCER_423 0x31A7 +#define WM8996_WRITE_SEQUENCER_424 0x31A8 +#define WM8996_WRITE_SEQUENCER_425 0x31A9 +#define WM8996_WRITE_SEQUENCER_426 0x31AA +#define WM8996_WRITE_SEQUENCER_427 0x31AB +#define WM8996_WRITE_SEQUENCER_428 0x31AC +#define WM8996_WRITE_SEQUENCER_429 0x31AD +#define WM8996_WRITE_SEQUENCER_430 0x31AE +#define WM8996_WRITE_SEQUENCER_431 0x31AF +#define WM8996_WRITE_SEQUENCER_432 0x31B0 +#define WM8996_WRITE_SEQUENCER_433 0x31B1 +#define WM8996_WRITE_SEQUENCER_434 0x31B2 +#define WM8996_WRITE_SEQUENCER_435 0x31B3 +#define WM8996_WRITE_SEQUENCER_436 0x31B4 +#define WM8996_WRITE_SEQUENCER_437 0x31B5 +#define WM8996_WRITE_SEQUENCER_438 0x31B6 +#define WM8996_WRITE_SEQUENCER_439 0x31B7 +#define WM8996_WRITE_SEQUENCER_440 0x31B8 +#define WM8996_WRITE_SEQUENCER_441 0x31B9 +#define WM8996_WRITE_SEQUENCER_442 0x31BA +#define WM8996_WRITE_SEQUENCER_443 0x31BB +#define WM8996_WRITE_SEQUENCER_444 0x31BC +#define WM8996_WRITE_SEQUENCER_445 0x31BD +#define WM8996_WRITE_SEQUENCER_446 0x31BE +#define WM8996_WRITE_SEQUENCER_447 0x31BF +#define WM8996_WRITE_SEQUENCER_448 0x31C0 +#define WM8996_WRITE_SEQUENCER_449 0x31C1 +#define WM8996_WRITE_SEQUENCER_450 0x31C2 +#define WM8996_WRITE_SEQUENCER_451 0x31C3 +#define WM8996_WRITE_SEQUENCER_452 0x31C4 +#define WM8996_WRITE_SEQUENCER_453 0x31C5 +#define WM8996_WRITE_SEQUENCER_454 0x31C6 +#define WM8996_WRITE_SEQUENCER_455 0x31C7 +#define WM8996_WRITE_SEQUENCER_456 0x31C8 +#define WM8996_WRITE_SEQUENCER_457 0x31C9 +#define WM8996_WRITE_SEQUENCER_458 0x31CA +#define WM8996_WRITE_SEQUENCER_459 0x31CB +#define WM8996_WRITE_SEQUENCER_460 0x31CC +#define WM8996_WRITE_SEQUENCER_461 0x31CD +#define WM8996_WRITE_SEQUENCER_462 0x31CE +#define WM8996_WRITE_SEQUENCER_463 0x31CF +#define WM8996_WRITE_SEQUENCER_464 0x31D0 +#define WM8996_WRITE_SEQUENCER_465 0x31D1 +#define WM8996_WRITE_SEQUENCER_466 0x31D2 +#define WM8996_WRITE_SEQUENCER_467 0x31D3 +#define WM8996_WRITE_SEQUENCER_468 0x31D4 +#define WM8996_WRITE_SEQUENCER_469 0x31D5 +#define WM8996_WRITE_SEQUENCER_470 0x31D6 +#define WM8996_WRITE_SEQUENCER_471 0x31D7 +#define WM8996_WRITE_SEQUENCER_472 0x31D8 +#define WM8996_WRITE_SEQUENCER_473 0x31D9 +#define WM8996_WRITE_SEQUENCER_474 0x31DA +#define WM8996_WRITE_SEQUENCER_475 0x31DB +#define WM8996_WRITE_SEQUENCER_476 0x31DC +#define WM8996_WRITE_SEQUENCER_477 0x31DD +#define WM8996_WRITE_SEQUENCER_478 0x31DE +#define WM8996_WRITE_SEQUENCER_479 0x31DF +#define WM8996_WRITE_SEQUENCER_480 0x31E0 +#define WM8996_WRITE_SEQUENCER_481 0x31E1 +#define WM8996_WRITE_SEQUENCER_482 0x31E2 +#define WM8996_WRITE_SEQUENCER_483 0x31E3 +#define WM8996_WRITE_SEQUENCER_484 0x31E4 +#define WM8996_WRITE_SEQUENCER_485 0x31E5 +#define WM8996_WRITE_SEQUENCER_486 0x31E6 +#define WM8996_WRITE_SEQUENCER_487 0x31E7 +#define WM8996_WRITE_SEQUENCER_488 0x31E8 +#define WM8996_WRITE_SEQUENCER_489 0x31E9 +#define WM8996_WRITE_SEQUENCER_490 0x31EA +#define WM8996_WRITE_SEQUENCER_491 0x31EB +#define WM8996_WRITE_SEQUENCER_492 0x31EC +#define WM8996_WRITE_SEQUENCER_493 0x31ED +#define WM8996_WRITE_SEQUENCER_494 0x31EE +#define WM8996_WRITE_SEQUENCER_495 0x31EF +#define WM8996_WRITE_SEQUENCER_496 0x31F0 +#define WM8996_WRITE_SEQUENCER_497 0x31F1 +#define WM8996_WRITE_SEQUENCER_498 0x31F2 +#define WM8996_WRITE_SEQUENCER_499 0x31F3 +#define WM8996_WRITE_SEQUENCER_500 0x31F4 +#define WM8996_WRITE_SEQUENCER_501 0x31F5 +#define WM8996_WRITE_SEQUENCER_502 0x31F6 +#define WM8996_WRITE_SEQUENCER_503 0x31F7 +#define WM8996_WRITE_SEQUENCER_504 0x31F8 +#define WM8996_WRITE_SEQUENCER_505 0x31F9 +#define WM8996_WRITE_SEQUENCER_506 0x31FA +#define WM8996_WRITE_SEQUENCER_507 0x31FB +#define WM8996_WRITE_SEQUENCER_508 0x31FC +#define WM8996_WRITE_SEQUENCER_509 0x31FD +#define WM8996_WRITE_SEQUENCER_510 0x31FE +#define WM8996_WRITE_SEQUENCER_511 0x31FF + +#define WM8996_REGISTER_COUNT 706 +#define WM8996_MAX_REGISTER 0x31FF + +/* + * Field Definitions. + */ + +/* + * R0 (0x00) - Software Reset + */ +#define WM8996_SW_RESET_MASK 0xFFFF /* SW_RESET - [15:0] */ +#define WM8996_SW_RESET_SHIFT 0 /* SW_RESET - [15:0] */ +#define WM8996_SW_RESET_WIDTH 16 /* SW_RESET - [15:0] */ + +/* + * R1 (0x01) - Power Management (1) + */ +#define WM8996_MICB2_ENA 0x0200 /* MICB2_ENA */ +#define WM8996_MICB2_ENA_MASK 0x0200 /* MICB2_ENA */ +#define WM8996_MICB2_ENA_SHIFT 9 /* MICB2_ENA */ +#define WM8996_MICB2_ENA_WIDTH 1 /* MICB2_ENA */ +#define WM8996_MICB1_ENA 0x0100 /* MICB1_ENA */ +#define WM8996_MICB1_ENA_MASK 0x0100 /* MICB1_ENA */ +#define WM8996_MICB1_ENA_SHIFT 8 /* MICB1_ENA */ +#define WM8996_MICB1_ENA_WIDTH 1 /* MICB1_ENA */ +#define WM8996_HPOUT2L_ENA 0x0080 /* HPOUT2L_ENA */ +#define WM8996_HPOUT2L_ENA_MASK 0x0080 /* HPOUT2L_ENA */ +#define WM8996_HPOUT2L_ENA_SHIFT 7 /* HPOUT2L_ENA */ +#define WM8996_HPOUT2L_ENA_WIDTH 1 /* HPOUT2L_ENA */ +#define WM8996_HPOUT2R_ENA 0x0040 /* HPOUT2R_ENA */ +#define WM8996_HPOUT2R_ENA_MASK 0x0040 /* HPOUT2R_ENA */ +#define WM8996_HPOUT2R_ENA_SHIFT 6 /* HPOUT2R_ENA */ +#define WM8996_HPOUT2R_ENA_WIDTH 1 /* HPOUT2R_ENA */ +#define WM8996_HPOUT1L_ENA 0x0020 /* HPOUT1L_ENA */ +#define WM8996_HPOUT1L_ENA_MASK 0x0020 /* HPOUT1L_ENA */ +#define WM8996_HPOUT1L_ENA_SHIFT 5 /* HPOUT1L_ENA */ +#define WM8996_HPOUT1L_ENA_WIDTH 1 /* HPOUT1L_ENA */ +#define WM8996_HPOUT1R_ENA 0x0010 /* HPOUT1R_ENA */ +#define WM8996_HPOUT1R_ENA_MASK 0x0010 /* HPOUT1R_ENA */ +#define WM8996_HPOUT1R_ENA_SHIFT 4 /* HPOUT1R_ENA */ +#define WM8996_HPOUT1R_ENA_WIDTH 1 /* HPOUT1R_ENA */ +#define WM8996_BG_ENA 0x0001 /* BG_ENA */ +#define WM8996_BG_ENA_MASK 0x0001 /* BG_ENA */ +#define WM8996_BG_ENA_SHIFT 0 /* BG_ENA */ +#define WM8996_BG_ENA_WIDTH 1 /* BG_ENA */ + +/* + * R2 (0x02) - Power Management (2) + */ +#define WM8996_OPCLK_ENA 0x0800 /* OPCLK_ENA */ +#define WM8996_OPCLK_ENA_MASK 0x0800 /* OPCLK_ENA */ +#define WM8996_OPCLK_ENA_SHIFT 11 /* OPCLK_ENA */ +#define WM8996_OPCLK_ENA_WIDTH 1 /* OPCLK_ENA */ +#define WM8996_INL_ENA 0x0020 /* INL_ENA */ +#define WM8996_INL_ENA_MASK 0x0020 /* INL_ENA */ +#define WM8996_INL_ENA_SHIFT 5 /* INL_ENA */ +#define WM8996_INL_ENA_WIDTH 1 /* INL_ENA */ +#define WM8996_INR_ENA 0x0010 /* INR_ENA */ +#define WM8996_INR_ENA_MASK 0x0010 /* INR_ENA */ +#define WM8996_INR_ENA_SHIFT 4 /* INR_ENA */ +#define WM8996_INR_ENA_WIDTH 1 /* INR_ENA */ +#define WM8996_LDO2_ENA 0x0002 /* LDO2_ENA */ +#define WM8996_LDO2_ENA_MASK 0x0002 /* LDO2_ENA */ +#define WM8996_LDO2_ENA_SHIFT 1 /* LDO2_ENA */ +#define WM8996_LDO2_ENA_WIDTH 1 /* LDO2_ENA */ + +/* + * R3 (0x03) - Power Management (3) + */ +#define WM8996_DSP2RXL_ENA 0x0800 /* DSP2RXL_ENA */ +#define WM8996_DSP2RXL_ENA_MASK 0x0800 /* DSP2RXL_ENA */ +#define WM8996_DSP2RXL_ENA_SHIFT 11 /* DSP2RXL_ENA */ +#define WM8996_DSP2RXL_ENA_WIDTH 1 /* DSP2RXL_ENA */ +#define WM8996_DSP2RXR_ENA 0x0400 /* DSP2RXR_ENA */ +#define WM8996_DSP2RXR_ENA_MASK 0x0400 /* DSP2RXR_ENA */ +#define WM8996_DSP2RXR_ENA_SHIFT 10 /* DSP2RXR_ENA */ +#define WM8996_DSP2RXR_ENA_WIDTH 1 /* DSP2RXR_ENA */ +#define WM8996_DSP1RXL_ENA 0x0200 /* DSP1RXL_ENA */ +#define WM8996_DSP1RXL_ENA_MASK 0x0200 /* DSP1RXL_ENA */ +#define WM8996_DSP1RXL_ENA_SHIFT 9 /* DSP1RXL_ENA */ +#define WM8996_DSP1RXL_ENA_WIDTH 1 /* DSP1RXL_ENA */ +#define WM8996_DSP1RXR_ENA 0x0100 /* DSP1RXR_ENA */ +#define WM8996_DSP1RXR_ENA_MASK 0x0100 /* DSP1RXR_ENA */ +#define WM8996_DSP1RXR_ENA_SHIFT 8 /* DSP1RXR_ENA */ +#define WM8996_DSP1RXR_ENA_WIDTH 1 /* DSP1RXR_ENA */ +#define WM8996_DMIC2L_ENA 0x0020 /* DMIC2L_ENA */ +#define WM8996_DMIC2L_ENA_MASK 0x0020 /* DMIC2L_ENA */ +#define WM8996_DMIC2L_ENA_SHIFT 5 /* DMIC2L_ENA */ +#define WM8996_DMIC2L_ENA_WIDTH 1 /* DMIC2L_ENA */ +#define WM8996_DMIC2R_ENA 0x0010 /* DMIC2R_ENA */ +#define WM8996_DMIC2R_ENA_MASK 0x0010 /* DMIC2R_ENA */ +#define WM8996_DMIC2R_ENA_SHIFT 4 /* DMIC2R_ENA */ +#define WM8996_DMIC2R_ENA_WIDTH 1 /* DMIC2R_ENA */ +#define WM8996_DMIC1L_ENA 0x0008 /* DMIC1L_ENA */ +#define WM8996_DMIC1L_ENA_MASK 0x0008 /* DMIC1L_ENA */ +#define WM8996_DMIC1L_ENA_SHIFT 3 /* DMIC1L_ENA */ +#define WM8996_DMIC1L_ENA_WIDTH 1 /* DMIC1L_ENA */ +#define WM8996_DMIC1R_ENA 0x0004 /* DMIC1R_ENA */ +#define WM8996_DMIC1R_ENA_MASK 0x0004 /* DMIC1R_ENA */ +#define WM8996_DMIC1R_ENA_SHIFT 2 /* DMIC1R_ENA */ +#define WM8996_DMIC1R_ENA_WIDTH 1 /* DMIC1R_ENA */ +#define WM8996_ADCL_ENA 0x0002 /* ADCL_ENA */ +#define WM8996_ADCL_ENA_MASK 0x0002 /* ADCL_ENA */ +#define WM8996_ADCL_ENA_SHIFT 1 /* ADCL_ENA */ +#define WM8996_ADCL_ENA_WIDTH 1 /* ADCL_ENA */ +#define WM8996_ADCR_ENA 0x0001 /* ADCR_ENA */ +#define WM8996_ADCR_ENA_MASK 0x0001 /* ADCR_ENA */ +#define WM8996_ADCR_ENA_SHIFT 0 /* ADCR_ENA */ +#define WM8996_ADCR_ENA_WIDTH 1 /* ADCR_ENA */ + +/* + * R4 (0x04) - Power Management (4) + */ +#define WM8996_AIF2RX_CHAN1_ENA 0x0200 /* AIF2RX_CHAN1_ENA */ +#define WM8996_AIF2RX_CHAN1_ENA_MASK 0x0200 /* AIF2RX_CHAN1_ENA */ +#define WM8996_AIF2RX_CHAN1_ENA_SHIFT 9 /* AIF2RX_CHAN1_ENA */ +#define WM8996_AIF2RX_CHAN1_ENA_WIDTH 1 /* AIF2RX_CHAN1_ENA */ +#define WM8996_AIF2RX_CHAN0_ENA 0x0100 /* AIF2RX_CHAN0_ENA */ +#define WM8996_AIF2RX_CHAN0_ENA_MASK 0x0100 /* AIF2RX_CHAN0_ENA */ +#define WM8996_AIF2RX_CHAN0_ENA_SHIFT 8 /* AIF2RX_CHAN0_ENA */ +#define WM8996_AIF2RX_CHAN0_ENA_WIDTH 1 /* AIF2RX_CHAN0_ENA */ +#define WM8996_AIF1RX_CHAN5_ENA 0x0020 /* AIF1RX_CHAN5_ENA */ +#define WM8996_AIF1RX_CHAN5_ENA_MASK 0x0020 /* AIF1RX_CHAN5_ENA */ +#define WM8996_AIF1RX_CHAN5_ENA_SHIFT 5 /* AIF1RX_CHAN5_ENA */ +#define WM8996_AIF1RX_CHAN5_ENA_WIDTH 1 /* AIF1RX_CHAN5_ENA */ +#define WM8996_AIF1RX_CHAN4_ENA 0x0010 /* AIF1RX_CHAN4_ENA */ +#define WM8996_AIF1RX_CHAN4_ENA_MASK 0x0010 /* AIF1RX_CHAN4_ENA */ +#define WM8996_AIF1RX_CHAN4_ENA_SHIFT 4 /* AIF1RX_CHAN4_ENA */ +#define WM8996_AIF1RX_CHAN4_ENA_WIDTH 1 /* AIF1RX_CHAN4_ENA */ +#define WM8996_AIF1RX_CHAN3_ENA 0x0008 /* AIF1RX_CHAN3_ENA */ +#define WM8996_AIF1RX_CHAN3_ENA_MASK 0x0008 /* AIF1RX_CHAN3_ENA */ +#define WM8996_AIF1RX_CHAN3_ENA_SHIFT 3 /* AIF1RX_CHAN3_ENA */ +#define WM8996_AIF1RX_CHAN3_ENA_WIDTH 1 /* AIF1RX_CHAN3_ENA */ +#define WM8996_AIF1RX_CHAN2_ENA 0x0004 /* AIF1RX_CHAN2_ENA */ +#define WM8996_AIF1RX_CHAN2_ENA_MASK 0x0004 /* AIF1RX_CHAN2_ENA */ +#define WM8996_AIF1RX_CHAN2_ENA_SHIFT 2 /* AIF1RX_CHAN2_ENA */ +#define WM8996_AIF1RX_CHAN2_ENA_WIDTH 1 /* AIF1RX_CHAN2_ENA */ +#define WM8996_AIF1RX_CHAN1_ENA 0x0002 /* AIF1RX_CHAN1_ENA */ +#define WM8996_AIF1RX_CHAN1_ENA_MASK 0x0002 /* AIF1RX_CHAN1_ENA */ +#define WM8996_AIF1RX_CHAN1_ENA_SHIFT 1 /* AIF1RX_CHAN1_ENA */ +#define WM8996_AIF1RX_CHAN1_ENA_WIDTH 1 /* AIF1RX_CHAN1_ENA */ +#define WM8996_AIF1RX_CHAN0_ENA 0x0001 /* AIF1RX_CHAN0_ENA */ +#define WM8996_AIF1RX_CHAN0_ENA_MASK 0x0001 /* AIF1RX_CHAN0_ENA */ +#define WM8996_AIF1RX_CHAN0_ENA_SHIFT 0 /* AIF1RX_CHAN0_ENA */ +#define WM8996_AIF1RX_CHAN0_ENA_WIDTH 1 /* AIF1RX_CHAN0_ENA */ + +/* + * R5 (0x05) - Power Management (5) + */ +#define WM8996_DSP2TXL_ENA 0x0800 /* DSP2TXL_ENA */ +#define WM8996_DSP2TXL_ENA_MASK 0x0800 /* DSP2TXL_ENA */ +#define WM8996_DSP2TXL_ENA_SHIFT 11 /* DSP2TXL_ENA */ +#define WM8996_DSP2TXL_ENA_WIDTH 1 /* DSP2TXL_ENA */ +#define WM8996_DSP2TXR_ENA 0x0400 /* DSP2TXR_ENA */ +#define WM8996_DSP2TXR_ENA_MASK 0x0400 /* DSP2TXR_ENA */ +#define WM8996_DSP2TXR_ENA_SHIFT 10 /* DSP2TXR_ENA */ +#define WM8996_DSP2TXR_ENA_WIDTH 1 /* DSP2TXR_ENA */ +#define WM8996_DSP1TXL_ENA 0x0200 /* DSP1TXL_ENA */ +#define WM8996_DSP1TXL_ENA_MASK 0x0200 /* DSP1TXL_ENA */ +#define WM8996_DSP1TXL_ENA_SHIFT 9 /* DSP1TXL_ENA */ +#define WM8996_DSP1TXL_ENA_WIDTH 1 /* DSP1TXL_ENA */ +#define WM8996_DSP1TXR_ENA 0x0100 /* DSP1TXR_ENA */ +#define WM8996_DSP1TXR_ENA_MASK 0x0100 /* DSP1TXR_ENA */ +#define WM8996_DSP1TXR_ENA_SHIFT 8 /* DSP1TXR_ENA */ +#define WM8996_DSP1TXR_ENA_WIDTH 1 /* DSP1TXR_ENA */ +#define WM8996_DAC2L_ENA 0x0008 /* DAC2L_ENA */ +#define WM8996_DAC2L_ENA_MASK 0x0008 /* DAC2L_ENA */ +#define WM8996_DAC2L_ENA_SHIFT 3 /* DAC2L_ENA */ +#define WM8996_DAC2L_ENA_WIDTH 1 /* DAC2L_ENA */ +#define WM8996_DAC2R_ENA 0x0004 /* DAC2R_ENA */ +#define WM8996_DAC2R_ENA_MASK 0x0004 /* DAC2R_ENA */ +#define WM8996_DAC2R_ENA_SHIFT 2 /* DAC2R_ENA */ +#define WM8996_DAC2R_ENA_WIDTH 1 /* DAC2R_ENA */ +#define WM8996_DAC1L_ENA 0x0002 /* DAC1L_ENA */ +#define WM8996_DAC1L_ENA_MASK 0x0002 /* DAC1L_ENA */ +#define WM8996_DAC1L_ENA_SHIFT 1 /* DAC1L_ENA */ +#define WM8996_DAC1L_ENA_WIDTH 1 /* DAC1L_ENA */ +#define WM8996_DAC1R_ENA 0x0001 /* DAC1R_ENA */ +#define WM8996_DAC1R_ENA_MASK 0x0001 /* DAC1R_ENA */ +#define WM8996_DAC1R_ENA_SHIFT 0 /* DAC1R_ENA */ +#define WM8996_DAC1R_ENA_WIDTH 1 /* DAC1R_ENA */ + +/* + * R6 (0x06) - Power Management (6) + */ +#define WM8996_AIF2TX_CHAN1_ENA 0x0200 /* AIF2TX_CHAN1_ENA */ +#define WM8996_AIF2TX_CHAN1_ENA_MASK 0x0200 /* AIF2TX_CHAN1_ENA */ +#define WM8996_AIF2TX_CHAN1_ENA_SHIFT 9 /* AIF2TX_CHAN1_ENA */ +#define WM8996_AIF2TX_CHAN1_ENA_WIDTH 1 /* AIF2TX_CHAN1_ENA */ +#define WM8996_AIF2TX_CHAN0_ENA 0x0100 /* AIF2TX_CHAN0_ENA */ +#define WM8996_AIF2TX_CHAN0_ENA_MASK 0x0100 /* AIF2TX_CHAN0_ENA */ +#define WM8996_AIF2TX_CHAN0_ENA_SHIFT 8 /* AIF2TX_CHAN0_ENA */ +#define WM8996_AIF2TX_CHAN0_ENA_WIDTH 1 /* AIF2TX_CHAN0_ENA */ +#define WM8996_AIF1TX_CHAN5_ENA 0x0020 /* AIF1TX_CHAN5_ENA */ +#define WM8996_AIF1TX_CHAN5_ENA_MASK 0x0020 /* AIF1TX_CHAN5_ENA */ +#define WM8996_AIF1TX_CHAN5_ENA_SHIFT 5 /* AIF1TX_CHAN5_ENA */ +#define WM8996_AIF1TX_CHAN5_ENA_WIDTH 1 /* AIF1TX_CHAN5_ENA */ +#define WM8996_AIF1TX_CHAN4_ENA 0x0010 /* AIF1TX_CHAN4_ENA */ +#define WM8996_AIF1TX_CHAN4_ENA_MASK 0x0010 /* AIF1TX_CHAN4_ENA */ +#define WM8996_AIF1TX_CHAN4_ENA_SHIFT 4 /* AIF1TX_CHAN4_ENA */ +#define WM8996_AIF1TX_CHAN4_ENA_WIDTH 1 /* AIF1TX_CHAN4_ENA */ +#define WM8996_AIF1TX_CHAN3_ENA 0x0008 /* AIF1TX_CHAN3_ENA */ +#define WM8996_AIF1TX_CHAN3_ENA_MASK 0x0008 /* AIF1TX_CHAN3_ENA */ +#define WM8996_AIF1TX_CHAN3_ENA_SHIFT 3 /* AIF1TX_CHAN3_ENA */ +#define WM8996_AIF1TX_CHAN3_ENA_WIDTH 1 /* AIF1TX_CHAN3_ENA */ +#define WM8996_AIF1TX_CHAN2_ENA 0x0004 /* AIF1TX_CHAN2_ENA */ +#define WM8996_AIF1TX_CHAN2_ENA_MASK 0x0004 /* AIF1TX_CHAN2_ENA */ +#define WM8996_AIF1TX_CHAN2_ENA_SHIFT 2 /* AIF1TX_CHAN2_ENA */ +#define WM8996_AIF1TX_CHAN2_ENA_WIDTH 1 /* AIF1TX_CHAN2_ENA */ +#define WM8996_AIF1TX_CHAN1_ENA 0x0002 /* AIF1TX_CHAN1_ENA */ +#define WM8996_AIF1TX_CHAN1_ENA_MASK 0x0002 /* AIF1TX_CHAN1_ENA */ +#define WM8996_AIF1TX_CHAN1_ENA_SHIFT 1 /* AIF1TX_CHAN1_ENA */ +#define WM8996_AIF1TX_CHAN1_ENA_WIDTH 1 /* AIF1TX_CHAN1_ENA */ +#define WM8996_AIF1TX_CHAN0_ENA 0x0001 /* AIF1TX_CHAN0_ENA */ +#define WM8996_AIF1TX_CHAN0_ENA_MASK 0x0001 /* AIF1TX_CHAN0_ENA */ +#define WM8996_AIF1TX_CHAN0_ENA_SHIFT 0 /* AIF1TX_CHAN0_ENA */ +#define WM8996_AIF1TX_CHAN0_ENA_WIDTH 1 /* AIF1TX_CHAN0_ENA */ + +/* + * R7 (0x07) - Power Management (7) + */ +#define WM8996_DMIC2_FN 0x0200 /* DMIC2_FN */ +#define WM8996_DMIC2_FN_MASK 0x0200 /* DMIC2_FN */ +#define WM8996_DMIC2_FN_SHIFT 9 /* DMIC2_FN */ +#define WM8996_DMIC2_FN_WIDTH 1 /* DMIC2_FN */ +#define WM8996_DMIC1_FN 0x0100 /* DMIC1_FN */ +#define WM8996_DMIC1_FN_MASK 0x0100 /* DMIC1_FN */ +#define WM8996_DMIC1_FN_SHIFT 8 /* DMIC1_FN */ +#define WM8996_DMIC1_FN_WIDTH 1 /* DMIC1_FN */ +#define WM8996_ADC_DMIC_DSP2R_ENA 0x0080 /* ADC_DMIC_DSP2R_ENA */ +#define WM8996_ADC_DMIC_DSP2R_ENA_MASK 0x0080 /* ADC_DMIC_DSP2R_ENA */ +#define WM8996_ADC_DMIC_DSP2R_ENA_SHIFT 7 /* ADC_DMIC_DSP2R_ENA */ +#define WM8996_ADC_DMIC_DSP2R_ENA_WIDTH 1 /* ADC_DMIC_DSP2R_ENA */ +#define WM8996_ADC_DMIC_DSP2L_ENA 0x0040 /* ADC_DMIC_DSP2L_ENA */ +#define WM8996_ADC_DMIC_DSP2L_ENA_MASK 0x0040 /* ADC_DMIC_DSP2L_ENA */ +#define WM8996_ADC_DMIC_DSP2L_ENA_SHIFT 6 /* ADC_DMIC_DSP2L_ENA */ +#define WM8996_ADC_DMIC_DSP2L_ENA_WIDTH 1 /* ADC_DMIC_DSP2L_ENA */ +#define WM8996_ADC_DMIC_SRC2_MASK 0x0030 /* ADC_DMIC_SRC2 - [5:4] */ +#define WM8996_ADC_DMIC_SRC2_SHIFT 4 /* ADC_DMIC_SRC2 - [5:4] */ +#define WM8996_ADC_DMIC_SRC2_WIDTH 2 /* ADC_DMIC_SRC2 - [5:4] */ +#define WM8996_ADC_DMIC_DSP1R_ENA 0x0008 /* ADC_DMIC_DSP1R_ENA */ +#define WM8996_ADC_DMIC_DSP1R_ENA_MASK 0x0008 /* ADC_DMIC_DSP1R_ENA */ +#define WM8996_ADC_DMIC_DSP1R_ENA_SHIFT 3 /* ADC_DMIC_DSP1R_ENA */ +#define WM8996_ADC_DMIC_DSP1R_ENA_WIDTH 1 /* ADC_DMIC_DSP1R_ENA */ +#define WM8996_ADC_DMIC_DSP1L_ENA 0x0004 /* ADC_DMIC_DSP1L_ENA */ +#define WM8996_ADC_DMIC_DSP1L_ENA_MASK 0x0004 /* ADC_DMIC_DSP1L_ENA */ +#define WM8996_ADC_DMIC_DSP1L_ENA_SHIFT 2 /* ADC_DMIC_DSP1L_ENA */ +#define WM8996_ADC_DMIC_DSP1L_ENA_WIDTH 1 /* ADC_DMIC_DSP1L_ENA */ +#define WM8996_ADC_DMIC_SRC1_MASK 0x0003 /* ADC_DMIC_SRC1 - [1:0] */ +#define WM8996_ADC_DMIC_SRC1_SHIFT 0 /* ADC_DMIC_SRC1 - [1:0] */ +#define WM8996_ADC_DMIC_SRC1_WIDTH 2 /* ADC_DMIC_SRC1 - [1:0] */ + +/* + * R8 (0x08) - Power Management (8) + */ +#define WM8996_AIF2TX_SRC_MASK 0x00C0 /* AIF2TX_SRC - [7:6] */ +#define WM8996_AIF2TX_SRC_SHIFT 6 /* AIF2TX_SRC - [7:6] */ +#define WM8996_AIF2TX_SRC_WIDTH 2 /* AIF2TX_SRC - [7:6] */ +#define WM8996_DSP2RX_SRC 0x0010 /* DSP2RX_SRC */ +#define WM8996_DSP2RX_SRC_MASK 0x0010 /* DSP2RX_SRC */ +#define WM8996_DSP2RX_SRC_SHIFT 4 /* DSP2RX_SRC */ +#define WM8996_DSP2RX_SRC_WIDTH 1 /* DSP2RX_SRC */ +#define WM8996_DSP1RX_SRC 0x0001 /* DSP1RX_SRC */ +#define WM8996_DSP1RX_SRC_MASK 0x0001 /* DSP1RX_SRC */ +#define WM8996_DSP1RX_SRC_SHIFT 0 /* DSP1RX_SRC */ +#define WM8996_DSP1RX_SRC_WIDTH 1 /* DSP1RX_SRC */ + +/* + * R16 (0x10) - Left Line Input Volume + */ +#define WM8996_IN1_VU 0x0080 /* IN1_VU */ +#define WM8996_IN1_VU_MASK 0x0080 /* IN1_VU */ +#define WM8996_IN1_VU_SHIFT 7 /* IN1_VU */ +#define WM8996_IN1_VU_WIDTH 1 /* IN1_VU */ +#define WM8996_IN1L_ZC 0x0020 /* IN1L_ZC */ +#define WM8996_IN1L_ZC_MASK 0x0020 /* IN1L_ZC */ +#define WM8996_IN1L_ZC_SHIFT 5 /* IN1L_ZC */ +#define WM8996_IN1L_ZC_WIDTH 1 /* IN1L_ZC */ +#define WM8996_IN1L_VOL_MASK 0x001F /* IN1L_VOL - [4:0] */ +#define WM8996_IN1L_VOL_SHIFT 0 /* IN1L_VOL - [4:0] */ +#define WM8996_IN1L_VOL_WIDTH 5 /* IN1L_VOL - [4:0] */ + +/* + * R17 (0x11) - Right Line Input Volume + */ +#define WM8996_IN1_VU 0x0080 /* IN1_VU */ +#define WM8996_IN1_VU_MASK 0x0080 /* IN1_VU */ +#define WM8996_IN1_VU_SHIFT 7 /* IN1_VU */ +#define WM8996_IN1_VU_WIDTH 1 /* IN1_VU */ +#define WM8996_IN1R_ZC 0x0020 /* IN1R_ZC */ +#define WM8996_IN1R_ZC_MASK 0x0020 /* IN1R_ZC */ +#define WM8996_IN1R_ZC_SHIFT 5 /* IN1R_ZC */ +#define WM8996_IN1R_ZC_WIDTH 1 /* IN1R_ZC */ +#define WM8996_IN1R_VOL_MASK 0x001F /* IN1R_VOL - [4:0] */ +#define WM8996_IN1R_VOL_SHIFT 0 /* IN1R_VOL - [4:0] */ +#define WM8996_IN1R_VOL_WIDTH 5 /* IN1R_VOL - [4:0] */ + +/* + * R18 (0x12) - Line Input Control + */ +#define WM8996_INL_MODE_MASK 0x000C /* INL_MODE - [3:2] */ +#define WM8996_INL_MODE_SHIFT 2 /* INL_MODE - [3:2] */ +#define WM8996_INL_MODE_WIDTH 2 /* INL_MODE - [3:2] */ +#define WM8996_INR_MODE_MASK 0x0003 /* INR_MODE - [1:0] */ +#define WM8996_INR_MODE_SHIFT 0 /* INR_MODE - [1:0] */ +#define WM8996_INR_MODE_WIDTH 2 /* INR_MODE - [1:0] */ + +/* + * R21 (0x15) - DAC1 HPOUT1 Volume + */ +#define WM8996_DAC1R_HPOUT1R_VOL_MASK 0x00F0 /* DAC1R_HPOUT1R_VOL - [7:4] */ +#define WM8996_DAC1R_HPOUT1R_VOL_SHIFT 4 /* DAC1R_HPOUT1R_VOL - [7:4] */ +#define WM8996_DAC1R_HPOUT1R_VOL_WIDTH 4 /* DAC1R_HPOUT1R_VOL - [7:4] */ +#define WM8996_DAC1L_HPOUT1L_VOL_MASK 0x000F /* DAC1L_HPOUT1L_VOL - [3:0] */ +#define WM8996_DAC1L_HPOUT1L_VOL_SHIFT 0 /* DAC1L_HPOUT1L_VOL - [3:0] */ +#define WM8996_DAC1L_HPOUT1L_VOL_WIDTH 4 /* DAC1L_HPOUT1L_VOL - [3:0] */ + +/* + * R22 (0x16) - DAC2 HPOUT2 Volume + */ +#define WM8996_DAC2R_HPOUT2R_VOL_MASK 0x00F0 /* DAC2R_HPOUT2R_VOL - [7:4] */ +#define WM8996_DAC2R_HPOUT2R_VOL_SHIFT 4 /* DAC2R_HPOUT2R_VOL - [7:4] */ +#define WM8996_DAC2R_HPOUT2R_VOL_WIDTH 4 /* DAC2R_HPOUT2R_VOL - [7:4] */ +#define WM8996_DAC2L_HPOUT2L_VOL_MASK 0x000F /* DAC2L_HPOUT2L_VOL - [3:0] */ +#define WM8996_DAC2L_HPOUT2L_VOL_SHIFT 0 /* DAC2L_HPOUT2L_VOL - [3:0] */ +#define WM8996_DAC2L_HPOUT2L_VOL_WIDTH 4 /* DAC2L_HPOUT2L_VOL - [3:0] */ + +/* + * R24 (0x18) - DAC1 Left Volume + */ +#define WM8996_DAC1L_MUTE 0x0200 /* DAC1L_MUTE */ +#define WM8996_DAC1L_MUTE_MASK 0x0200 /* DAC1L_MUTE */ +#define WM8996_DAC1L_MUTE_SHIFT 9 /* DAC1L_MUTE */ +#define WM8996_DAC1L_MUTE_WIDTH 1 /* DAC1L_MUTE */ +#define WM8996_DAC1_VU 0x0100 /* DAC1_VU */ +#define WM8996_DAC1_VU_MASK 0x0100 /* DAC1_VU */ +#define WM8996_DAC1_VU_SHIFT 8 /* DAC1_VU */ +#define WM8996_DAC1_VU_WIDTH 1 /* DAC1_VU */ +#define WM8996_DAC1L_VOL_MASK 0x00FF /* DAC1L_VOL - [7:0] */ +#define WM8996_DAC1L_VOL_SHIFT 0 /* DAC1L_VOL - [7:0] */ +#define WM8996_DAC1L_VOL_WIDTH 8 /* DAC1L_VOL - [7:0] */ + +/* + * R25 (0x19) - DAC1 Right Volume + */ +#define WM8996_DAC1R_MUTE 0x0200 /* DAC1R_MUTE */ +#define WM8996_DAC1R_MUTE_MASK 0x0200 /* DAC1R_MUTE */ +#define WM8996_DAC1R_MUTE_SHIFT 9 /* DAC1R_MUTE */ +#define WM8996_DAC1R_MUTE_WIDTH 1 /* DAC1R_MUTE */ +#define WM8996_DAC1_VU 0x0100 /* DAC1_VU */ +#define WM8996_DAC1_VU_MASK 0x0100 /* DAC1_VU */ +#define WM8996_DAC1_VU_SHIFT 8 /* DAC1_VU */ +#define WM8996_DAC1_VU_WIDTH 1 /* DAC1_VU */ +#define WM8996_DAC1R_VOL_MASK 0x00FF /* DAC1R_VOL - [7:0] */ +#define WM8996_DAC1R_VOL_SHIFT 0 /* DAC1R_VOL - [7:0] */ +#define WM8996_DAC1R_VOL_WIDTH 8 /* DAC1R_VOL - [7:0] */ + +/* + * R26 (0x1A) - DAC2 Left Volume + */ +#define WM8996_DAC2L_MUTE 0x0200 /* DAC2L_MUTE */ +#define WM8996_DAC2L_MUTE_MASK 0x0200 /* DAC2L_MUTE */ +#define WM8996_DAC2L_MUTE_SHIFT 9 /* DAC2L_MUTE */ +#define WM8996_DAC2L_MUTE_WIDTH 1 /* DAC2L_MUTE */ +#define WM8996_DAC2_VU 0x0100 /* DAC2_VU */ +#define WM8996_DAC2_VU_MASK 0x0100 /* DAC2_VU */ +#define WM8996_DAC2_VU_SHIFT 8 /* DAC2_VU */ +#define WM8996_DAC2_VU_WIDTH 1 /* DAC2_VU */ +#define WM8996_DAC2L_VOL_MASK 0x00FF /* DAC2L_VOL - [7:0] */ +#define WM8996_DAC2L_VOL_SHIFT 0 /* DAC2L_VOL - [7:0] */ +#define WM8996_DAC2L_VOL_WIDTH 8 /* DAC2L_VOL - [7:0] */ + +/* + * R27 (0x1B) - DAC2 Right Volume + */ +#define WM8996_DAC2R_MUTE 0x0200 /* DAC2R_MUTE */ +#define WM8996_DAC2R_MUTE_MASK 0x0200 /* DAC2R_MUTE */ +#define WM8996_DAC2R_MUTE_SHIFT 9 /* DAC2R_MUTE */ +#define WM8996_DAC2R_MUTE_WIDTH 1 /* DAC2R_MUTE */ +#define WM8996_DAC2_VU 0x0100 /* DAC2_VU */ +#define WM8996_DAC2_VU_MASK 0x0100 /* DAC2_VU */ +#define WM8996_DAC2_VU_SHIFT 8 /* DAC2_VU */ +#define WM8996_DAC2_VU_WIDTH 1 /* DAC2_VU */ +#define WM8996_DAC2R_VOL_MASK 0x00FF /* DAC2R_VOL - [7:0] */ +#define WM8996_DAC2R_VOL_SHIFT 0 /* DAC2R_VOL - [7:0] */ +#define WM8996_DAC2R_VOL_WIDTH 8 /* DAC2R_VOL - [7:0] */ + +/* + * R28 (0x1C) - Output1 Left Volume + */ +#define WM8996_DAC1_VU 0x0100 /* DAC1_VU */ +#define WM8996_DAC1_VU_MASK 0x0100 /* DAC1_VU */ +#define WM8996_DAC1_VU_SHIFT 8 /* DAC1_VU */ +#define WM8996_DAC1_VU_WIDTH 1 /* DAC1_VU */ +#define WM8996_HPOUT1L_ZC 0x0080 /* HPOUT1L_ZC */ +#define WM8996_HPOUT1L_ZC_MASK 0x0080 /* HPOUT1L_ZC */ +#define WM8996_HPOUT1L_ZC_SHIFT 7 /* HPOUT1L_ZC */ +#define WM8996_HPOUT1L_ZC_WIDTH 1 /* HPOUT1L_ZC */ +#define WM8996_HPOUT1L_VOL_MASK 0x000F /* HPOUT1L_VOL - [3:0] */ +#define WM8996_HPOUT1L_VOL_SHIFT 0 /* HPOUT1L_VOL - [3:0] */ +#define WM8996_HPOUT1L_VOL_WIDTH 4 /* HPOUT1L_VOL - [3:0] */ + +/* + * R29 (0x1D) - Output1 Right Volume + */ +#define WM8996_DAC1_VU 0x0100 /* DAC1_VU */ +#define WM8996_DAC1_VU_MASK 0x0100 /* DAC1_VU */ +#define WM8996_DAC1_VU_SHIFT 8 /* DAC1_VU */ +#define WM8996_DAC1_VU_WIDTH 1 /* DAC1_VU */ +#define WM8996_HPOUT1R_ZC 0x0080 /* HPOUT1R_ZC */ +#define WM8996_HPOUT1R_ZC_MASK 0x0080 /* HPOUT1R_ZC */ +#define WM8996_HPOUT1R_ZC_SHIFT 7 /* HPOUT1R_ZC */ +#define WM8996_HPOUT1R_ZC_WIDTH 1 /* HPOUT1R_ZC */ +#define WM8996_HPOUT1R_VOL_MASK 0x000F /* HPOUT1R_VOL - [3:0] */ +#define WM8996_HPOUT1R_VOL_SHIFT 0 /* HPOUT1R_VOL - [3:0] */ +#define WM8996_HPOUT1R_VOL_WIDTH 4 /* HPOUT1R_VOL - [3:0] */ + +/* + * R30 (0x1E) - Output2 Left Volume + */ +#define WM8996_DAC2_VU 0x0100 /* DAC2_VU */ +#define WM8996_DAC2_VU_MASK 0x0100 /* DAC2_VU */ +#define WM8996_DAC2_VU_SHIFT 8 /* DAC2_VU */ +#define WM8996_DAC2_VU_WIDTH 1 /* DAC2_VU */ +#define WM8996_HPOUT2L_ZC 0x0080 /* HPOUT2L_ZC */ +#define WM8996_HPOUT2L_ZC_MASK 0x0080 /* HPOUT2L_ZC */ +#define WM8996_HPOUT2L_ZC_SHIFT 7 /* HPOUT2L_ZC */ +#define WM8996_HPOUT2L_ZC_WIDTH 1 /* HPOUT2L_ZC */ +#define WM8996_HPOUT2L_VOL_MASK 0x000F /* HPOUT2L_VOL - [3:0] */ +#define WM8996_HPOUT2L_VOL_SHIFT 0 /* HPOUT2L_VOL - [3:0] */ +#define WM8996_HPOUT2L_VOL_WIDTH 4 /* HPOUT2L_VOL - [3:0] */ + +/* + * R31 (0x1F) - Output2 Right Volume + */ +#define WM8996_DAC2_VU 0x0100 /* DAC2_VU */ +#define WM8996_DAC2_VU_MASK 0x0100 /* DAC2_VU */ +#define WM8996_DAC2_VU_SHIFT 8 /* DAC2_VU */ +#define WM8996_DAC2_VU_WIDTH 1 /* DAC2_VU */ +#define WM8996_HPOUT2R_ZC 0x0080 /* HPOUT2R_ZC */ +#define WM8996_HPOUT2R_ZC_MASK 0x0080 /* HPOUT2R_ZC */ +#define WM8996_HPOUT2R_ZC_SHIFT 7 /* HPOUT2R_ZC */ +#define WM8996_HPOUT2R_ZC_WIDTH 1 /* HPOUT2R_ZC */ +#define WM8996_HPOUT2R_VOL_MASK 0x000F /* HPOUT2R_VOL - [3:0] */ +#define WM8996_HPOUT2R_VOL_SHIFT 0 /* HPOUT2R_VOL - [3:0] */ +#define WM8996_HPOUT2R_VOL_WIDTH 4 /* HPOUT2R_VOL - [3:0] */ + +/* + * R32 (0x20) - MICBIAS (1) + */ +#define WM8996_MICB1_RATE 0x0020 /* MICB1_RATE */ +#define WM8996_MICB1_RATE_MASK 0x0020 /* MICB1_RATE */ +#define WM8996_MICB1_RATE_SHIFT 5 /* MICB1_RATE */ +#define WM8996_MICB1_RATE_WIDTH 1 /* MICB1_RATE */ +#define WM8996_MICB1_MODE 0x0010 /* MICB1_MODE */ +#define WM8996_MICB1_MODE_MASK 0x0010 /* MICB1_MODE */ +#define WM8996_MICB1_MODE_SHIFT 4 /* MICB1_MODE */ +#define WM8996_MICB1_MODE_WIDTH 1 /* MICB1_MODE */ +#define WM8996_MICB1_LVL_MASK 0x000E /* MICB1_LVL - [3:1] */ +#define WM8996_MICB1_LVL_SHIFT 1 /* MICB1_LVL - [3:1] */ +#define WM8996_MICB1_LVL_WIDTH 3 /* MICB1_LVL - [3:1] */ +#define WM8996_MICB1_DISCH 0x0001 /* MICB1_DISCH */ +#define WM8996_MICB1_DISCH_MASK 0x0001 /* MICB1_DISCH */ +#define WM8996_MICB1_DISCH_SHIFT 0 /* MICB1_DISCH */ +#define WM8996_MICB1_DISCH_WIDTH 1 /* MICB1_DISCH */ + +/* + * R33 (0x21) - MICBIAS (2) + */ +#define WM8996_MICB2_RATE 0x0020 /* MICB2_RATE */ +#define WM8996_MICB2_RATE_MASK 0x0020 /* MICB2_RATE */ +#define WM8996_MICB2_RATE_SHIFT 5 /* MICB2_RATE */ +#define WM8996_MICB2_RATE_WIDTH 1 /* MICB2_RATE */ +#define WM8996_MICB2_MODE 0x0010 /* MICB2_MODE */ +#define WM8996_MICB2_MODE_MASK 0x0010 /* MICB2_MODE */ +#define WM8996_MICB2_MODE_SHIFT 4 /* MICB2_MODE */ +#define WM8996_MICB2_MODE_WIDTH 1 /* MICB2_MODE */ +#define WM8996_MICB2_LVL_MASK 0x000E /* MICB2_LVL - [3:1] */ +#define WM8996_MICB2_LVL_SHIFT 1 /* MICB2_LVL - [3:1] */ +#define WM8996_MICB2_LVL_WIDTH 3 /* MICB2_LVL - [3:1] */ +#define WM8996_MICB2_DISCH 0x0001 /* MICB2_DISCH */ +#define WM8996_MICB2_DISCH_MASK 0x0001 /* MICB2_DISCH */ +#define WM8996_MICB2_DISCH_SHIFT 0 /* MICB2_DISCH */ +#define WM8996_MICB2_DISCH_WIDTH 1 /* MICB2_DISCH */ + +/* + * R40 (0x28) - LDO 1 + */ +#define WM8996_LDO1_MODE 0x0020 /* LDO1_MODE */ +#define WM8996_LDO1_MODE_MASK 0x0020 /* LDO1_MODE */ +#define WM8996_LDO1_MODE_SHIFT 5 /* LDO1_MODE */ +#define WM8996_LDO1_MODE_WIDTH 1 /* LDO1_MODE */ +#define WM8996_LDO1_VSEL_MASK 0x0006 /* LDO1_VSEL - [2:1] */ +#define WM8996_LDO1_VSEL_SHIFT 1 /* LDO1_VSEL - [2:1] */ +#define WM8996_LDO1_VSEL_WIDTH 2 /* LDO1_VSEL - [2:1] */ +#define WM8996_LDO1_DISCH 0x0001 /* LDO1_DISCH */ +#define WM8996_LDO1_DISCH_MASK 0x0001 /* LDO1_DISCH */ +#define WM8996_LDO1_DISCH_SHIFT 0 /* LDO1_DISCH */ +#define WM8996_LDO1_DISCH_WIDTH 1 /* LDO1_DISCH */ + +/* + * R41 (0x29) - LDO 2 + */ +#define WM8996_LDO2_MODE 0x0020 /* LDO2_MODE */ +#define WM8996_LDO2_MODE_MASK 0x0020 /* LDO2_MODE */ +#define WM8996_LDO2_MODE_SHIFT 5 /* LDO2_MODE */ +#define WM8996_LDO2_MODE_WIDTH 1 /* LDO2_MODE */ +#define WM8996_LDO2_VSEL_MASK 0x001E /* LDO2_VSEL - [4:1] */ +#define WM8996_LDO2_VSEL_SHIFT 1 /* LDO2_VSEL - [4:1] */ +#define WM8996_LDO2_VSEL_WIDTH 4 /* LDO2_VSEL - [4:1] */ +#define WM8996_LDO2_DISCH 0x0001 /* LDO2_DISCH */ +#define WM8996_LDO2_DISCH_MASK 0x0001 /* LDO2_DISCH */ +#define WM8996_LDO2_DISCH_SHIFT 0 /* LDO2_DISCH */ +#define WM8996_LDO2_DISCH_WIDTH 1 /* LDO2_DISCH */ + +/* + * R48 (0x30) - Accessory Detect Mode 1 + */ +#define WM8996_JD_MODE_MASK 0x0003 /* JD_MODE - [1:0] */ +#define WM8996_JD_MODE_SHIFT 0 /* JD_MODE - [1:0] */ +#define WM8996_JD_MODE_WIDTH 2 /* JD_MODE - [1:0] */ + +/* + * R49 (0x31) - Accessory Detect Mode 2 + */ +#define WM8996_HPOUT1FB_SRC 0x0004 /* HPOUT1FB_SRC */ +#define WM8996_HPOUT1FB_SRC_MASK 0x0004 /* HPOUT1FB_SRC */ +#define WM8996_HPOUT1FB_SRC_SHIFT 2 /* HPOUT1FB_SRC */ +#define WM8996_HPOUT1FB_SRC_WIDTH 1 /* HPOUT1FB_SRC */ +#define WM8996_MICD_SRC 0x0002 /* MICD_SRC */ +#define WM8996_MICD_SRC_MASK 0x0002 /* MICD_SRC */ +#define WM8996_MICD_SRC_SHIFT 1 /* MICD_SRC */ +#define WM8996_MICD_SRC_WIDTH 1 /* MICD_SRC */ +#define WM8996_MICD_BIAS_SRC 0x0001 /* MICD_BIAS_SRC */ +#define WM8996_MICD_BIAS_SRC_MASK 0x0001 /* MICD_BIAS_SRC */ +#define WM8996_MICD_BIAS_SRC_SHIFT 0 /* MICD_BIAS_SRC */ +#define WM8996_MICD_BIAS_SRC_WIDTH 1 /* MICD_BIAS_SRC */ + +/* + * R52 (0x34) - Headphone Detect 1 + */ +#define WM8996_HP_HOLDTIME_MASK 0x00E0 /* HP_HOLDTIME - [7:5] */ +#define WM8996_HP_HOLDTIME_SHIFT 5 /* HP_HOLDTIME - [7:5] */ +#define WM8996_HP_HOLDTIME_WIDTH 3 /* HP_HOLDTIME - [7:5] */ +#define WM8996_HP_CLK_DIV_MASK 0x0018 /* HP_CLK_DIV - [4:3] */ +#define WM8996_HP_CLK_DIV_SHIFT 3 /* HP_CLK_DIV - [4:3] */ +#define WM8996_HP_CLK_DIV_WIDTH 2 /* HP_CLK_DIV - [4:3] */ +#define WM8996_HP_STEP_SIZE 0x0002 /* HP_STEP_SIZE */ +#define WM8996_HP_STEP_SIZE_MASK 0x0002 /* HP_STEP_SIZE */ +#define WM8996_HP_STEP_SIZE_SHIFT 1 /* HP_STEP_SIZE */ +#define WM8996_HP_STEP_SIZE_WIDTH 1 /* HP_STEP_SIZE */ +#define WM8996_HP_POLL 0x0001 /* HP_POLL */ +#define WM8996_HP_POLL_MASK 0x0001 /* HP_POLL */ +#define WM8996_HP_POLL_SHIFT 0 /* HP_POLL */ +#define WM8996_HP_POLL_WIDTH 1 /* HP_POLL */ + +/* + * R53 (0x35) - Headphone Detect 2 + */ +#define WM8996_HP_DONE 0x0080 /* HP_DONE */ +#define WM8996_HP_DONE_MASK 0x0080 /* HP_DONE */ +#define WM8996_HP_DONE_SHIFT 7 /* HP_DONE */ +#define WM8996_HP_DONE_WIDTH 1 /* HP_DONE */ +#define WM8996_HP_LVL_MASK 0x007F /* HP_LVL - [6:0] */ +#define WM8996_HP_LVL_SHIFT 0 /* HP_LVL - [6:0] */ +#define WM8996_HP_LVL_WIDTH 7 /* HP_LVL - [6:0] */ + +/* + * R56 (0x38) - Mic Detect 1 + */ +#define WM8996_MICD_BIAS_STARTTIME_MASK 0xF000 /* MICD_BIAS_STARTTIME - [15:12] */ +#define WM8996_MICD_BIAS_STARTTIME_SHIFT 12 /* MICD_BIAS_STARTTIME - [15:12] */ +#define WM8996_MICD_BIAS_STARTTIME_WIDTH 4 /* MICD_BIAS_STARTTIME - [15:12] */ +#define WM8996_MICD_RATE_MASK 0x0F00 /* MICD_RATE - [11:8] */ +#define WM8996_MICD_RATE_SHIFT 8 /* MICD_RATE - [11:8] */ +#define WM8996_MICD_RATE_WIDTH 4 /* MICD_RATE - [11:8] */ +#define WM8996_MICD_DBTIME 0x0002 /* MICD_DBTIME */ +#define WM8996_MICD_DBTIME_MASK 0x0002 /* MICD_DBTIME */ +#define WM8996_MICD_DBTIME_SHIFT 1 /* MICD_DBTIME */ +#define WM8996_MICD_DBTIME_WIDTH 1 /* MICD_DBTIME */ +#define WM8996_MICD_ENA 0x0001 /* MICD_ENA */ +#define WM8996_MICD_ENA_MASK 0x0001 /* MICD_ENA */ +#define WM8996_MICD_ENA_SHIFT 0 /* MICD_ENA */ +#define WM8996_MICD_ENA_WIDTH 1 /* MICD_ENA */ + +/* + * R57 (0x39) - Mic Detect 2 + */ +#define WM8996_MICD_LVL_SEL_MASK 0x00FF /* MICD_LVL_SEL - [7:0] */ +#define WM8996_MICD_LVL_SEL_SHIFT 0 /* MICD_LVL_SEL - [7:0] */ +#define WM8996_MICD_LVL_SEL_WIDTH 8 /* MICD_LVL_SEL - [7:0] */ + +/* + * R58 (0x3A) - Mic Detect 3 + */ +#define WM8996_MICD_LVL_MASK 0x07FC /* MICD_LVL - [10:2] */ +#define WM8996_MICD_LVL_SHIFT 2 /* MICD_LVL - [10:2] */ +#define WM8996_MICD_LVL_WIDTH 9 /* MICD_LVL - [10:2] */ +#define WM8996_MICD_VALID 0x0002 /* MICD_VALID */ +#define WM8996_MICD_VALID_MASK 0x0002 /* MICD_VALID */ +#define WM8996_MICD_VALID_SHIFT 1 /* MICD_VALID */ +#define WM8996_MICD_VALID_WIDTH 1 /* MICD_VALID */ +#define WM8996_MICD_STS 0x0001 /* MICD_STS */ +#define WM8996_MICD_STS_MASK 0x0001 /* MICD_STS */ +#define WM8996_MICD_STS_SHIFT 0 /* MICD_STS */ +#define WM8996_MICD_STS_WIDTH 1 /* MICD_STS */ + +/* + * R64 (0x40) - Charge Pump (1) + */ +#define WM8996_CP_ENA 0x8000 /* CP_ENA */ +#define WM8996_CP_ENA_MASK 0x8000 /* CP_ENA */ +#define WM8996_CP_ENA_SHIFT 15 /* CP_ENA */ +#define WM8996_CP_ENA_WIDTH 1 /* CP_ENA */ + +/* + * R65 (0x41) - Charge Pump (2) + */ +#define WM8996_CP_DISCH 0x8000 /* CP_DISCH */ +#define WM8996_CP_DISCH_MASK 0x8000 /* CP_DISCH */ +#define WM8996_CP_DISCH_SHIFT 15 /* CP_DISCH */ +#define WM8996_CP_DISCH_WIDTH 1 /* CP_DISCH */ + +/* + * R80 (0x50) - DC Servo (1) + */ +#define WM8996_DCS_ENA_CHAN_3 0x0008 /* DCS_ENA_CHAN_3 */ +#define WM8996_DCS_ENA_CHAN_3_MASK 0x0008 /* DCS_ENA_CHAN_3 */ +#define WM8996_DCS_ENA_CHAN_3_SHIFT 3 /* DCS_ENA_CHAN_3 */ +#define WM8996_DCS_ENA_CHAN_3_WIDTH 1 /* DCS_ENA_CHAN_3 */ +#define WM8996_DCS_ENA_CHAN_2 0x0004 /* DCS_ENA_CHAN_2 */ +#define WM8996_DCS_ENA_CHAN_2_MASK 0x0004 /* DCS_ENA_CHAN_2 */ +#define WM8996_DCS_ENA_CHAN_2_SHIFT 2 /* DCS_ENA_CHAN_2 */ +#define WM8996_DCS_ENA_CHAN_2_WIDTH 1 /* DCS_ENA_CHAN_2 */ +#define WM8996_DCS_ENA_CHAN_1 0x0002 /* DCS_ENA_CHAN_1 */ +#define WM8996_DCS_ENA_CHAN_1_MASK 0x0002 /* DCS_ENA_CHAN_1 */ +#define WM8996_DCS_ENA_CHAN_1_SHIFT 1 /* DCS_ENA_CHAN_1 */ +#define WM8996_DCS_ENA_CHAN_1_WIDTH 1 /* DCS_ENA_CHAN_1 */ +#define WM8996_DCS_ENA_CHAN_0 0x0001 /* DCS_ENA_CHAN_0 */ +#define WM8996_DCS_ENA_CHAN_0_MASK 0x0001 /* DCS_ENA_CHAN_0 */ +#define WM8996_DCS_ENA_CHAN_0_SHIFT 0 /* DCS_ENA_CHAN_0 */ +#define WM8996_DCS_ENA_CHAN_0_WIDTH 1 /* DCS_ENA_CHAN_0 */ + +/* + * R81 (0x51) - DC Servo (2) + */ +#define WM8996_DCS_TRIG_SINGLE_3 0x8000 /* DCS_TRIG_SINGLE_3 */ +#define WM8996_DCS_TRIG_SINGLE_3_MASK 0x8000 /* DCS_TRIG_SINGLE_3 */ +#define WM8996_DCS_TRIG_SINGLE_3_SHIFT 15 /* DCS_TRIG_SINGLE_3 */ +#define WM8996_DCS_TRIG_SINGLE_3_WIDTH 1 /* DCS_TRIG_SINGLE_3 */ +#define WM8996_DCS_TRIG_SINGLE_2 0x4000 /* DCS_TRIG_SINGLE_2 */ +#define WM8996_DCS_TRIG_SINGLE_2_MASK 0x4000 /* DCS_TRIG_SINGLE_2 */ +#define WM8996_DCS_TRIG_SINGLE_2_SHIFT 14 /* DCS_TRIG_SINGLE_2 */ +#define WM8996_DCS_TRIG_SINGLE_2_WIDTH 1 /* DCS_TRIG_SINGLE_2 */ +#define WM8996_DCS_TRIG_SINGLE_1 0x2000 /* DCS_TRIG_SINGLE_1 */ +#define WM8996_DCS_TRIG_SINGLE_1_MASK 0x2000 /* DCS_TRIG_SINGLE_1 */ +#define WM8996_DCS_TRIG_SINGLE_1_SHIFT 13 /* DCS_TRIG_SINGLE_1 */ +#define WM8996_DCS_TRIG_SINGLE_1_WIDTH 1 /* DCS_TRIG_SINGLE_1 */ +#define WM8996_DCS_TRIG_SINGLE_0 0x1000 /* DCS_TRIG_SINGLE_0 */ +#define WM8996_DCS_TRIG_SINGLE_0_MASK 0x1000 /* DCS_TRIG_SINGLE_0 */ +#define WM8996_DCS_TRIG_SINGLE_0_SHIFT 12 /* DCS_TRIG_SINGLE_0 */ +#define WM8996_DCS_TRIG_SINGLE_0_WIDTH 1 /* DCS_TRIG_SINGLE_0 */ +#define WM8996_DCS_TRIG_SERIES_3 0x0800 /* DCS_TRIG_SERIES_3 */ +#define WM8996_DCS_TRIG_SERIES_3_MASK 0x0800 /* DCS_TRIG_SERIES_3 */ +#define WM8996_DCS_TRIG_SERIES_3_SHIFT 11 /* DCS_TRIG_SERIES_3 */ +#define WM8996_DCS_TRIG_SERIES_3_WIDTH 1 /* DCS_TRIG_SERIES_3 */ +#define WM8996_DCS_TRIG_SERIES_2 0x0400 /* DCS_TRIG_SERIES_2 */ +#define WM8996_DCS_TRIG_SERIES_2_MASK 0x0400 /* DCS_TRIG_SERIES_2 */ +#define WM8996_DCS_TRIG_SERIES_2_SHIFT 10 /* DCS_TRIG_SERIES_2 */ +#define WM8996_DCS_TRIG_SERIES_2_WIDTH 1 /* DCS_TRIG_SERIES_2 */ +#define WM8996_DCS_TRIG_SERIES_1 0x0200 /* DCS_TRIG_SERIES_1 */ +#define WM8996_DCS_TRIG_SERIES_1_MASK 0x0200 /* DCS_TRIG_SERIES_1 */ +#define WM8996_DCS_TRIG_SERIES_1_SHIFT 9 /* DCS_TRIG_SERIES_1 */ +#define WM8996_DCS_TRIG_SERIES_1_WIDTH 1 /* DCS_TRIG_SERIES_1 */ +#define WM8996_DCS_TRIG_SERIES_0 0x0100 /* DCS_TRIG_SERIES_0 */ +#define WM8996_DCS_TRIG_SERIES_0_MASK 0x0100 /* DCS_TRIG_SERIES_0 */ +#define WM8996_DCS_TRIG_SERIES_0_SHIFT 8 /* DCS_TRIG_SERIES_0 */ +#define WM8996_DCS_TRIG_SERIES_0_WIDTH 1 /* DCS_TRIG_SERIES_0 */ +#define WM8996_DCS_TRIG_STARTUP_3 0x0080 /* DCS_TRIG_STARTUP_3 */ +#define WM8996_DCS_TRIG_STARTUP_3_MASK 0x0080 /* DCS_TRIG_STARTUP_3 */ +#define WM8996_DCS_TRIG_STARTUP_3_SHIFT 7 /* DCS_TRIG_STARTUP_3 */ +#define WM8996_DCS_TRIG_STARTUP_3_WIDTH 1 /* DCS_TRIG_STARTUP_3 */ +#define WM8996_DCS_TRIG_STARTUP_2 0x0040 /* DCS_TRIG_STARTUP_2 */ +#define WM8996_DCS_TRIG_STARTUP_2_MASK 0x0040 /* DCS_TRIG_STARTUP_2 */ +#define WM8996_DCS_TRIG_STARTUP_2_SHIFT 6 /* DCS_TRIG_STARTUP_2 */ +#define WM8996_DCS_TRIG_STARTUP_2_WIDTH 1 /* DCS_TRIG_STARTUP_2 */ +#define WM8996_DCS_TRIG_STARTUP_1 0x0020 /* DCS_TRIG_STARTUP_1 */ +#define WM8996_DCS_TRIG_STARTUP_1_MASK 0x0020 /* DCS_TRIG_STARTUP_1 */ +#define WM8996_DCS_TRIG_STARTUP_1_SHIFT 5 /* DCS_TRIG_STARTUP_1 */ +#define WM8996_DCS_TRIG_STARTUP_1_WIDTH 1 /* DCS_TRIG_STARTUP_1 */ +#define WM8996_DCS_TRIG_STARTUP_0 0x0010 /* DCS_TRIG_STARTUP_0 */ +#define WM8996_DCS_TRIG_STARTUP_0_MASK 0x0010 /* DCS_TRIG_STARTUP_0 */ +#define WM8996_DCS_TRIG_STARTUP_0_SHIFT 4 /* DCS_TRIG_STARTUP_0 */ +#define WM8996_DCS_TRIG_STARTUP_0_WIDTH 1 /* DCS_TRIG_STARTUP_0 */ +#define WM8996_DCS_TRIG_DAC_WR_3 0x0008 /* DCS_TRIG_DAC_WR_3 */ +#define WM8996_DCS_TRIG_DAC_WR_3_MASK 0x0008 /* DCS_TRIG_DAC_WR_3 */ +#define WM8996_DCS_TRIG_DAC_WR_3_SHIFT 3 /* DCS_TRIG_DAC_WR_3 */ +#define WM8996_DCS_TRIG_DAC_WR_3_WIDTH 1 /* DCS_TRIG_DAC_WR_3 */ +#define WM8996_DCS_TRIG_DAC_WR_2 0x0004 /* DCS_TRIG_DAC_WR_2 */ +#define WM8996_DCS_TRIG_DAC_WR_2_MASK 0x0004 /* DCS_TRIG_DAC_WR_2 */ +#define WM8996_DCS_TRIG_DAC_WR_2_SHIFT 2 /* DCS_TRIG_DAC_WR_2 */ +#define WM8996_DCS_TRIG_DAC_WR_2_WIDTH 1 /* DCS_TRIG_DAC_WR_2 */ +#define WM8996_DCS_TRIG_DAC_WR_1 0x0002 /* DCS_TRIG_DAC_WR_1 */ +#define WM8996_DCS_TRIG_DAC_WR_1_MASK 0x0002 /* DCS_TRIG_DAC_WR_1 */ +#define WM8996_DCS_TRIG_DAC_WR_1_SHIFT 1 /* DCS_TRIG_DAC_WR_1 */ +#define WM8996_DCS_TRIG_DAC_WR_1_WIDTH 1 /* DCS_TRIG_DAC_WR_1 */ +#define WM8996_DCS_TRIG_DAC_WR_0 0x0001 /* DCS_TRIG_DAC_WR_0 */ +#define WM8996_DCS_TRIG_DAC_WR_0_MASK 0x0001 /* DCS_TRIG_DAC_WR_0 */ +#define WM8996_DCS_TRIG_DAC_WR_0_SHIFT 0 /* DCS_TRIG_DAC_WR_0 */ +#define WM8996_DCS_TRIG_DAC_WR_0_WIDTH 1 /* DCS_TRIG_DAC_WR_0 */ + +/* + * R82 (0x52) - DC Servo (3) + */ +#define WM8996_DCS_TIMER_PERIOD_23_MASK 0x0F00 /* DCS_TIMER_PERIOD_23 - [11:8] */ +#define WM8996_DCS_TIMER_PERIOD_23_SHIFT 8 /* DCS_TIMER_PERIOD_23 - [11:8] */ +#define WM8996_DCS_TIMER_PERIOD_23_WIDTH 4 /* DCS_TIMER_PERIOD_23 - [11:8] */ +#define WM8996_DCS_TIMER_PERIOD_01_MASK 0x000F /* DCS_TIMER_PERIOD_01 - [3:0] */ +#define WM8996_DCS_TIMER_PERIOD_01_SHIFT 0 /* DCS_TIMER_PERIOD_01 - [3:0] */ +#define WM8996_DCS_TIMER_PERIOD_01_WIDTH 4 /* DCS_TIMER_PERIOD_01 - [3:0] */ + +/* + * R84 (0x54) - DC Servo (5) + */ +#define WM8996_DCS_SERIES_NO_23_MASK 0x7F00 /* DCS_SERIES_NO_23 - [14:8] */ +#define WM8996_DCS_SERIES_NO_23_SHIFT 8 /* DCS_SERIES_NO_23 - [14:8] */ +#define WM8996_DCS_SERIES_NO_23_WIDTH 7 /* DCS_SERIES_NO_23 - [14:8] */ +#define WM8996_DCS_SERIES_NO_01_MASK 0x007F /* DCS_SERIES_NO_01 - [6:0] */ +#define WM8996_DCS_SERIES_NO_01_SHIFT 0 /* DCS_SERIES_NO_01 - [6:0] */ +#define WM8996_DCS_SERIES_NO_01_WIDTH 7 /* DCS_SERIES_NO_01 - [6:0] */ + +/* + * R85 (0x55) - DC Servo (6) + */ +#define WM8996_DCS_DAC_WR_VAL_3_MASK 0xFF00 /* DCS_DAC_WR_VAL_3 - [15:8] */ +#define WM8996_DCS_DAC_WR_VAL_3_SHIFT 8 /* DCS_DAC_WR_VAL_3 - [15:8] */ +#define WM8996_DCS_DAC_WR_VAL_3_WIDTH 8 /* DCS_DAC_WR_VAL_3 - [15:8] */ +#define WM8996_DCS_DAC_WR_VAL_2_MASK 0x00FF /* DCS_DAC_WR_VAL_2 - [7:0] */ +#define WM8996_DCS_DAC_WR_VAL_2_SHIFT 0 /* DCS_DAC_WR_VAL_2 - [7:0] */ +#define WM8996_DCS_DAC_WR_VAL_2_WIDTH 8 /* DCS_DAC_WR_VAL_2 - [7:0] */ + +/* + * R86 (0x56) - DC Servo (7) + */ +#define WM8996_DCS_DAC_WR_VAL_1_MASK 0xFF00 /* DCS_DAC_WR_VAL_1 - [15:8] */ +#define WM8996_DCS_DAC_WR_VAL_1_SHIFT 8 /* DCS_DAC_WR_VAL_1 - [15:8] */ +#define WM8996_DCS_DAC_WR_VAL_1_WIDTH 8 /* DCS_DAC_WR_VAL_1 - [15:8] */ +#define WM8996_DCS_DAC_WR_VAL_0_MASK 0x00FF /* DCS_DAC_WR_VAL_0 - [7:0] */ +#define WM8996_DCS_DAC_WR_VAL_0_SHIFT 0 /* DCS_DAC_WR_VAL_0 - [7:0] */ +#define WM8996_DCS_DAC_WR_VAL_0_WIDTH 8 /* DCS_DAC_WR_VAL_0 - [7:0] */ + +/* + * R87 (0x57) - DC Servo Readback 0 + */ +#define WM8996_DCS_CAL_COMPLETE_MASK 0x0F00 /* DCS_CAL_COMPLETE - [11:8] */ +#define WM8996_DCS_CAL_COMPLETE_SHIFT 8 /* DCS_CAL_COMPLETE - [11:8] */ +#define WM8996_DCS_CAL_COMPLETE_WIDTH 4 /* DCS_CAL_COMPLETE - [11:8] */ +#define WM8996_DCS_DAC_WR_COMPLETE_MASK 0x00F0 /* DCS_DAC_WR_COMPLETE - [7:4] */ +#define WM8996_DCS_DAC_WR_COMPLETE_SHIFT 4 /* DCS_DAC_WR_COMPLETE - [7:4] */ +#define WM8996_DCS_DAC_WR_COMPLETE_WIDTH 4 /* DCS_DAC_WR_COMPLETE - [7:4] */ +#define WM8996_DCS_STARTUP_COMPLETE_MASK 0x000F /* DCS_STARTUP_COMPLETE - [3:0] */ +#define WM8996_DCS_STARTUP_COMPLETE_SHIFT 0 /* DCS_STARTUP_COMPLETE - [3:0] */ +#define WM8996_DCS_STARTUP_COMPLETE_WIDTH 4 /* DCS_STARTUP_COMPLETE - [3:0] */ + +/* + * R96 (0x60) - Analogue HP (1) + */ +#define WM8996_HPOUT1L_RMV_SHORT 0x0080 /* HPOUT1L_RMV_SHORT */ +#define WM8996_HPOUT1L_RMV_SHORT_MASK 0x0080 /* HPOUT1L_RMV_SHORT */ +#define WM8996_HPOUT1L_RMV_SHORT_SHIFT 7 /* HPOUT1L_RMV_SHORT */ +#define WM8996_HPOUT1L_RMV_SHORT_WIDTH 1 /* HPOUT1L_RMV_SHORT */ +#define WM8996_HPOUT1L_OUTP 0x0040 /* HPOUT1L_OUTP */ +#define WM8996_HPOUT1L_OUTP_MASK 0x0040 /* HPOUT1L_OUTP */ +#define WM8996_HPOUT1L_OUTP_SHIFT 6 /* HPOUT1L_OUTP */ +#define WM8996_HPOUT1L_OUTP_WIDTH 1 /* HPOUT1L_OUTP */ +#define WM8996_HPOUT1L_DLY 0x0020 /* HPOUT1L_DLY */ +#define WM8996_HPOUT1L_DLY_MASK 0x0020 /* HPOUT1L_DLY */ +#define WM8996_HPOUT1L_DLY_SHIFT 5 /* HPOUT1L_DLY */ +#define WM8996_HPOUT1L_DLY_WIDTH 1 /* HPOUT1L_DLY */ +#define WM8996_HPOUT1R_RMV_SHORT 0x0008 /* HPOUT1R_RMV_SHORT */ +#define WM8996_HPOUT1R_RMV_SHORT_MASK 0x0008 /* HPOUT1R_RMV_SHORT */ +#define WM8996_HPOUT1R_RMV_SHORT_SHIFT 3 /* HPOUT1R_RMV_SHORT */ +#define WM8996_HPOUT1R_RMV_SHORT_WIDTH 1 /* HPOUT1R_RMV_SHORT */ +#define WM8996_HPOUT1R_OUTP 0x0004 /* HPOUT1R_OUTP */ +#define WM8996_HPOUT1R_OUTP_MASK 0x0004 /* HPOUT1R_OUTP */ +#define WM8996_HPOUT1R_OUTP_SHIFT 2 /* HPOUT1R_OUTP */ +#define WM8996_HPOUT1R_OUTP_WIDTH 1 /* HPOUT1R_OUTP */ +#define WM8996_HPOUT1R_DLY 0x0002 /* HPOUT1R_DLY */ +#define WM8996_HPOUT1R_DLY_MASK 0x0002 /* HPOUT1R_DLY */ +#define WM8996_HPOUT1R_DLY_SHIFT 1 /* HPOUT1R_DLY */ +#define WM8996_HPOUT1R_DLY_WIDTH 1 /* HPOUT1R_DLY */ + +/* + * R97 (0x61) - Analogue HP (2) + */ +#define WM8996_HPOUT2L_RMV_SHORT 0x0080 /* HPOUT2L_RMV_SHORT */ +#define WM8996_HPOUT2L_RMV_SHORT_MASK 0x0080 /* HPOUT2L_RMV_SHORT */ +#define WM8996_HPOUT2L_RMV_SHORT_SHIFT 7 /* HPOUT2L_RMV_SHORT */ +#define WM8996_HPOUT2L_RMV_SHORT_WIDTH 1 /* HPOUT2L_RMV_SHORT */ +#define WM8996_HPOUT2L_OUTP 0x0040 /* HPOUT2L_OUTP */ +#define WM8996_HPOUT2L_OUTP_MASK 0x0040 /* HPOUT2L_OUTP */ +#define WM8996_HPOUT2L_OUTP_SHIFT 6 /* HPOUT2L_OUTP */ +#define WM8996_HPOUT2L_OUTP_WIDTH 1 /* HPOUT2L_OUTP */ +#define WM8996_HPOUT2L_DLY 0x0020 /* HPOUT2L_DLY */ +#define WM8996_HPOUT2L_DLY_MASK 0x0020 /* HPOUT2L_DLY */ +#define WM8996_HPOUT2L_DLY_SHIFT 5 /* HPOUT2L_DLY */ +#define WM8996_HPOUT2L_DLY_WIDTH 1 /* HPOUT2L_DLY */ +#define WM8996_HPOUT2R_RMV_SHORT 0x0008 /* HPOUT2R_RMV_SHORT */ +#define WM8996_HPOUT2R_RMV_SHORT_MASK 0x0008 /* HPOUT2R_RMV_SHORT */ +#define WM8996_HPOUT2R_RMV_SHORT_SHIFT 3 /* HPOUT2R_RMV_SHORT */ +#define WM8996_HPOUT2R_RMV_SHORT_WIDTH 1 /* HPOUT2R_RMV_SHORT */ +#define WM8996_HPOUT2R_OUTP 0x0004 /* HPOUT2R_OUTP */ +#define WM8996_HPOUT2R_OUTP_MASK 0x0004 /* HPOUT2R_OUTP */ +#define WM8996_HPOUT2R_OUTP_SHIFT 2 /* HPOUT2R_OUTP */ +#define WM8996_HPOUT2R_OUTP_WIDTH 1 /* HPOUT2R_OUTP */ +#define WM8996_HPOUT2R_DLY 0x0002 /* HPOUT2R_DLY */ +#define WM8996_HPOUT2R_DLY_MASK 0x0002 /* HPOUT2R_DLY */ +#define WM8996_HPOUT2R_DLY_SHIFT 1 /* HPOUT2R_DLY */ +#define WM8996_HPOUT2R_DLY_WIDTH 1 /* HPOUT2R_DLY */ + +/* + * R256 (0x100) - Chip Revision + */ +#define WM8996_CHIP_REV_MASK 0x000F /* CHIP_REV - [3:0] */ +#define WM8996_CHIP_REV_SHIFT 0 /* CHIP_REV - [3:0] */ +#define WM8996_CHIP_REV_WIDTH 4 /* CHIP_REV - [3:0] */ + +/* + * R257 (0x101) - Control Interface (1) + */ +#define WM8996_AUTO_INC 0x0004 /* AUTO_INC */ +#define WM8996_AUTO_INC_MASK 0x0004 /* AUTO_INC */ +#define WM8996_AUTO_INC_SHIFT 2 /* AUTO_INC */ +#define WM8996_AUTO_INC_WIDTH 1 /* AUTO_INC */ + +/* + * R272 (0x110) - Write Sequencer Ctrl (1) + */ +#define WM8996_WSEQ_ENA 0x8000 /* WSEQ_ENA */ +#define WM8996_WSEQ_ENA_MASK 0x8000 /* WSEQ_ENA */ +#define WM8996_WSEQ_ENA_SHIFT 15 /* WSEQ_ENA */ +#define WM8996_WSEQ_ENA_WIDTH 1 /* WSEQ_ENA */ +#define WM8996_WSEQ_ABORT 0x0200 /* WSEQ_ABORT */ +#define WM8996_WSEQ_ABORT_MASK 0x0200 /* WSEQ_ABORT */ +#define WM8996_WSEQ_ABORT_SHIFT 9 /* WSEQ_ABORT */ +#define WM8996_WSEQ_ABORT_WIDTH 1 /* WSEQ_ABORT */ +#define WM8996_WSEQ_START 0x0100 /* WSEQ_START */ +#define WM8996_WSEQ_START_MASK 0x0100 /* WSEQ_START */ +#define WM8996_WSEQ_START_SHIFT 8 /* WSEQ_START */ +#define WM8996_WSEQ_START_WIDTH 1 /* WSEQ_START */ +#define WM8996_WSEQ_START_INDEX_MASK 0x007F /* WSEQ_START_INDEX - [6:0] */ +#define WM8996_WSEQ_START_INDEX_SHIFT 0 /* WSEQ_START_INDEX - [6:0] */ +#define WM8996_WSEQ_START_INDEX_WIDTH 7 /* WSEQ_START_INDEX - [6:0] */ + +/* + * R273 (0x111) - Write Sequencer Ctrl (2) + */ +#define WM8996_WSEQ_BUSY 0x0100 /* WSEQ_BUSY */ +#define WM8996_WSEQ_BUSY_MASK 0x0100 /* WSEQ_BUSY */ +#define WM8996_WSEQ_BUSY_SHIFT 8 /* WSEQ_BUSY */ +#define WM8996_WSEQ_BUSY_WIDTH 1 /* WSEQ_BUSY */ +#define WM8996_WSEQ_CURRENT_INDEX_MASK 0x007F /* WSEQ_CURRENT_INDEX - [6:0] */ +#define WM8996_WSEQ_CURRENT_INDEX_SHIFT 0 /* WSEQ_CURRENT_INDEX - [6:0] */ +#define WM8996_WSEQ_CURRENT_INDEX_WIDTH 7 /* WSEQ_CURRENT_INDEX - [6:0] */ + +/* + * R512 (0x200) - AIF Clocking (1) + */ +#define WM8996_SYSCLK_SRC_MASK 0x0018 /* SYSCLK_SRC - [4:3] */ +#define WM8996_SYSCLK_SRC_SHIFT 3 /* SYSCLK_SRC - [4:3] */ +#define WM8996_SYSCLK_SRC_WIDTH 2 /* SYSCLK_SRC - [4:3] */ +#define WM8996_SYSCLK_INV 0x0004 /* SYSCLK_INV */ +#define WM8996_SYSCLK_INV_MASK 0x0004 /* SYSCLK_INV */ +#define WM8996_SYSCLK_INV_SHIFT 2 /* SYSCLK_INV */ +#define WM8996_SYSCLK_INV_WIDTH 1 /* SYSCLK_INV */ +#define WM8996_SYSCLK_DIV 0x0002 /* SYSCLK_DIV */ +#define WM8996_SYSCLK_DIV_MASK 0x0002 /* SYSCLK_DIV */ +#define WM8996_SYSCLK_DIV_SHIFT 1 /* SYSCLK_DIV */ +#define WM8996_SYSCLK_DIV_WIDTH 1 /* SYSCLK_DIV */ +#define WM8996_SYSCLK_ENA 0x0001 /* SYSCLK_ENA */ +#define WM8996_SYSCLK_ENA_MASK 0x0001 /* SYSCLK_ENA */ +#define WM8996_SYSCLK_ENA_SHIFT 0 /* SYSCLK_ENA */ +#define WM8996_SYSCLK_ENA_WIDTH 1 /* SYSCLK_ENA */ + +/* + * R513 (0x201) - AIF Clocking (2) + */ +#define WM8996_DSP2_DIV_MASK 0x0018 /* DSP2_DIV - [4:3] */ +#define WM8996_DSP2_DIV_SHIFT 3 /* DSP2_DIV - [4:3] */ +#define WM8996_DSP2_DIV_WIDTH 2 /* DSP2_DIV - [4:3] */ +#define WM8996_DSP1_DIV_MASK 0x0003 /* DSP1_DIV - [1:0] */ +#define WM8996_DSP1_DIV_SHIFT 0 /* DSP1_DIV - [1:0] */ +#define WM8996_DSP1_DIV_WIDTH 2 /* DSP1_DIV - [1:0] */ + +/* + * R520 (0x208) - Clocking (1) + */ +#define WM8996_LFCLK_ENA 0x0020 /* LFCLK_ENA */ +#define WM8996_LFCLK_ENA_MASK 0x0020 /* LFCLK_ENA */ +#define WM8996_LFCLK_ENA_SHIFT 5 /* LFCLK_ENA */ +#define WM8996_LFCLK_ENA_WIDTH 1 /* LFCLK_ENA */ +#define WM8996_TOCLK_ENA 0x0010 /* TOCLK_ENA */ +#define WM8996_TOCLK_ENA_MASK 0x0010 /* TOCLK_ENA */ +#define WM8996_TOCLK_ENA_SHIFT 4 /* TOCLK_ENA */ +#define WM8996_TOCLK_ENA_WIDTH 1 /* TOCLK_ENA */ +#define WM8996_AIFCLK_ENA 0x0004 /* AIFCLK_ENA */ +#define WM8996_AIFCLK_ENA_MASK 0x0004 /* AIFCLK_ENA */ +#define WM8996_AIFCLK_ENA_SHIFT 2 /* AIFCLK_ENA */ +#define WM8996_AIFCLK_ENA_WIDTH 1 /* AIFCLK_ENA */ +#define WM8996_SYSDSPCLK_ENA 0x0002 /* SYSDSPCLK_ENA */ +#define WM8996_SYSDSPCLK_ENA_MASK 0x0002 /* SYSDSPCLK_ENA */ +#define WM8996_SYSDSPCLK_ENA_SHIFT 1 /* SYSDSPCLK_ENA */ +#define WM8996_SYSDSPCLK_ENA_WIDTH 1 /* SYSDSPCLK_ENA */ + +/* + * R521 (0x209) - Clocking (2) + */ +#define WM8996_TOCLK_DIV_MASK 0x0700 /* TOCLK_DIV - [10:8] */ +#define WM8996_TOCLK_DIV_SHIFT 8 /* TOCLK_DIV - [10:8] */ +#define WM8996_TOCLK_DIV_WIDTH 3 /* TOCLK_DIV - [10:8] */ +#define WM8996_DBCLK_DIV_MASK 0x00F0 /* DBCLK_DIV - [7:4] */ +#define WM8996_DBCLK_DIV_SHIFT 4 /* DBCLK_DIV - [7:4] */ +#define WM8996_DBCLK_DIV_WIDTH 4 /* DBCLK_DIV - [7:4] */ +#define WM8996_OPCLK_DIV_MASK 0x0007 /* OPCLK_DIV - [2:0] */ +#define WM8996_OPCLK_DIV_SHIFT 0 /* OPCLK_DIV - [2:0] */ +#define WM8996_OPCLK_DIV_WIDTH 3 /* OPCLK_DIV - [2:0] */ + +/* + * R528 (0x210) - AIF Rate + */ +#define WM8996_SYSCLK_RATE 0x0001 /* SYSCLK_RATE */ +#define WM8996_SYSCLK_RATE_MASK 0x0001 /* SYSCLK_RATE */ +#define WM8996_SYSCLK_RATE_SHIFT 0 /* SYSCLK_RATE */ +#define WM8996_SYSCLK_RATE_WIDTH 1 /* SYSCLK_RATE */ + +/* + * R544 (0x220) - FLL Control (1) + */ +#define WM8996_FLL_OSC_ENA 0x0002 /* FLL_OSC_ENA */ +#define WM8996_FLL_OSC_ENA_MASK 0x0002 /* FLL_OSC_ENA */ +#define WM8996_FLL_OSC_ENA_SHIFT 1 /* FLL_OSC_ENA */ +#define WM8996_FLL_OSC_ENA_WIDTH 1 /* FLL_OSC_ENA */ +#define WM8996_FLL_ENA 0x0001 /* FLL_ENA */ +#define WM8996_FLL_ENA_MASK 0x0001 /* FLL_ENA */ +#define WM8996_FLL_ENA_SHIFT 0 /* FLL_ENA */ +#define WM8996_FLL_ENA_WIDTH 1 /* FLL_ENA */ + +/* + * R545 (0x221) - FLL Control (2) + */ +#define WM8996_FLL_OUTDIV_MASK 0x3F00 /* FLL_OUTDIV - [13:8] */ +#define WM8996_FLL_OUTDIV_SHIFT 8 /* FLL_OUTDIV - [13:8] */ +#define WM8996_FLL_OUTDIV_WIDTH 6 /* FLL_OUTDIV - [13:8] */ +#define WM8996_FLL_FRATIO_MASK 0x0007 /* FLL_FRATIO - [2:0] */ +#define WM8996_FLL_FRATIO_SHIFT 0 /* FLL_FRATIO - [2:0] */ +#define WM8996_FLL_FRATIO_WIDTH 3 /* FLL_FRATIO - [2:0] */ + +/* + * R546 (0x222) - FLL Control (3) + */ +#define WM8996_FLL_THETA_MASK 0xFFFF /* FLL_THETA - [15:0] */ +#define WM8996_FLL_THETA_SHIFT 0 /* FLL_THETA - [15:0] */ +#define WM8996_FLL_THETA_WIDTH 16 /* FLL_THETA - [15:0] */ + +/* + * R547 (0x223) - FLL Control (4) + */ +#define WM8996_FLL_N_MASK 0x7FE0 /* FLL_N - [14:5] */ +#define WM8996_FLL_N_SHIFT 5 /* FLL_N - [14:5] */ +#define WM8996_FLL_N_WIDTH 10 /* FLL_N - [14:5] */ +#define WM8996_FLL_LOOP_GAIN_MASK 0x000F /* FLL_LOOP_GAIN - [3:0] */ +#define WM8996_FLL_LOOP_GAIN_SHIFT 0 /* FLL_LOOP_GAIN - [3:0] */ +#define WM8996_FLL_LOOP_GAIN_WIDTH 4 /* FLL_LOOP_GAIN - [3:0] */ + +/* + * R548 (0x224) - FLL Control (5) + */ +#define WM8996_FLL_FRC_NCO_VAL_MASK 0x1F80 /* FLL_FRC_NCO_VAL - [12:7] */ +#define WM8996_FLL_FRC_NCO_VAL_SHIFT 7 /* FLL_FRC_NCO_VAL - [12:7] */ +#define WM8996_FLL_FRC_NCO_VAL_WIDTH 6 /* FLL_FRC_NCO_VAL - [12:7] */ +#define WM8996_FLL_FRC_NCO 0x0040 /* FLL_FRC_NCO */ +#define WM8996_FLL_FRC_NCO_MASK 0x0040 /* FLL_FRC_NCO */ +#define WM8996_FLL_FRC_NCO_SHIFT 6 /* FLL_FRC_NCO */ +#define WM8996_FLL_FRC_NCO_WIDTH 1 /* FLL_FRC_NCO */ +#define WM8996_FLL_REFCLK_DIV_MASK 0x0018 /* FLL_REFCLK_DIV - [4:3] */ +#define WM8996_FLL_REFCLK_DIV_SHIFT 3 /* FLL_REFCLK_DIV - [4:3] */ +#define WM8996_FLL_REFCLK_DIV_WIDTH 2 /* FLL_REFCLK_DIV - [4:3] */ +#define WM8996_FLL_REF_FREQ 0x0004 /* FLL_REF_FREQ */ +#define WM8996_FLL_REF_FREQ_MASK 0x0004 /* FLL_REF_FREQ */ +#define WM8996_FLL_REF_FREQ_SHIFT 2 /* FLL_REF_FREQ */ +#define WM8996_FLL_REF_FREQ_WIDTH 1 /* FLL_REF_FREQ */ +#define WM8996_FLL_REFCLK_SRC_MASK 0x0003 /* FLL_REFCLK_SRC - [1:0] */ +#define WM8996_FLL_REFCLK_SRC_SHIFT 0 /* FLL_REFCLK_SRC - [1:0] */ +#define WM8996_FLL_REFCLK_SRC_WIDTH 2 /* FLL_REFCLK_SRC - [1:0] */ + +/* + * R549 (0x225) - FLL Control (6) + */ +#define WM8996_FLL_REFCLK_SRC_STS_MASK 0x000C /* FLL_REFCLK_SRC_STS - [3:2] */ +#define WM8996_FLL_REFCLK_SRC_STS_SHIFT 2 /* FLL_REFCLK_SRC_STS - [3:2] */ +#define WM8996_FLL_REFCLK_SRC_STS_WIDTH 2 /* FLL_REFCLK_SRC_STS - [3:2] */ +#define WM8996_FLL_SWITCH_CLK 0x0001 /* FLL_SWITCH_CLK */ +#define WM8996_FLL_SWITCH_CLK_MASK 0x0001 /* FLL_SWITCH_CLK */ +#define WM8996_FLL_SWITCH_CLK_SHIFT 0 /* FLL_SWITCH_CLK */ +#define WM8996_FLL_SWITCH_CLK_WIDTH 1 /* FLL_SWITCH_CLK */ + +/* + * R550 (0x226) - FLL EFS 1 + */ +#define WM8996_FLL_LAMBDA_MASK 0xFFFF /* FLL_LAMBDA - [15:0] */ +#define WM8996_FLL_LAMBDA_SHIFT 0 /* FLL_LAMBDA - [15:0] */ +#define WM8996_FLL_LAMBDA_WIDTH 16 /* FLL_LAMBDA - [15:0] */ + +/* + * R551 (0x227) - FLL EFS 2 + */ +#define WM8996_FLL_LFSR_SEL_MASK 0x0006 /* FLL_LFSR_SEL - [2:1] */ +#define WM8996_FLL_LFSR_SEL_SHIFT 1 /* FLL_LFSR_SEL - [2:1] */ +#define WM8996_FLL_LFSR_SEL_WIDTH 2 /* FLL_LFSR_SEL - [2:1] */ +#define WM8996_FLL_EFS_ENA 0x0001 /* FLL_EFS_ENA */ +#define WM8996_FLL_EFS_ENA_MASK 0x0001 /* FLL_EFS_ENA */ +#define WM8996_FLL_EFS_ENA_SHIFT 0 /* FLL_EFS_ENA */ +#define WM8996_FLL_EFS_ENA_WIDTH 1 /* FLL_EFS_ENA */ + +/* + * R768 (0x300) - AIF1 Control + */ +#define WM8996_AIF1_TRI 0x0004 /* AIF1_TRI */ +#define WM8996_AIF1_TRI_MASK 0x0004 /* AIF1_TRI */ +#define WM8996_AIF1_TRI_SHIFT 2 /* AIF1_TRI */ +#define WM8996_AIF1_TRI_WIDTH 1 /* AIF1_TRI */ +#define WM8996_AIF1_FMT_MASK 0x0003 /* AIF1_FMT - [1:0] */ +#define WM8996_AIF1_FMT_SHIFT 0 /* AIF1_FMT - [1:0] */ +#define WM8996_AIF1_FMT_WIDTH 2 /* AIF1_FMT - [1:0] */ + +/* + * R769 (0x301) - AIF1 BCLK + */ +#define WM8996_AIF1_BCLK_INV 0x0400 /* AIF1_BCLK_INV */ +#define WM8996_AIF1_BCLK_INV_MASK 0x0400 /* AIF1_BCLK_INV */ +#define WM8996_AIF1_BCLK_INV_SHIFT 10 /* AIF1_BCLK_INV */ +#define WM8996_AIF1_BCLK_INV_WIDTH 1 /* AIF1_BCLK_INV */ +#define WM8996_AIF1_BCLK_FRC 0x0200 /* AIF1_BCLK_FRC */ +#define WM8996_AIF1_BCLK_FRC_MASK 0x0200 /* AIF1_BCLK_FRC */ +#define WM8996_AIF1_BCLK_FRC_SHIFT 9 /* AIF1_BCLK_FRC */ +#define WM8996_AIF1_BCLK_FRC_WIDTH 1 /* AIF1_BCLK_FRC */ +#define WM8996_AIF1_BCLK_MSTR 0x0100 /* AIF1_BCLK_MSTR */ +#define WM8996_AIF1_BCLK_MSTR_MASK 0x0100 /* AIF1_BCLK_MSTR */ +#define WM8996_AIF1_BCLK_MSTR_SHIFT 8 /* AIF1_BCLK_MSTR */ +#define WM8996_AIF1_BCLK_MSTR_WIDTH 1 /* AIF1_BCLK_MSTR */ +#define WM8996_AIF1_BCLK_DIV_MASK 0x000F /* AIF1_BCLK_DIV - [3:0] */ +#define WM8996_AIF1_BCLK_DIV_SHIFT 0 /* AIF1_BCLK_DIV - [3:0] */ +#define WM8996_AIF1_BCLK_DIV_WIDTH 4 /* AIF1_BCLK_DIV - [3:0] */ + +/* + * R770 (0x302) - AIF1 TX LRCLK(1) + */ +#define WM8996_AIF1TX_RATE_MASK 0x07FF /* AIF1TX_RATE - [10:0] */ +#define WM8996_AIF1TX_RATE_SHIFT 0 /* AIF1TX_RATE - [10:0] */ +#define WM8996_AIF1TX_RATE_WIDTH 11 /* AIF1TX_RATE - [10:0] */ + +/* + * R771 (0x303) - AIF1 TX LRCLK(2) + */ +#define WM8996_AIF1TX_LRCLK_MODE 0x0008 /* AIF1TX_LRCLK_MODE */ +#define WM8996_AIF1TX_LRCLK_MODE_MASK 0x0008 /* AIF1TX_LRCLK_MODE */ +#define WM8996_AIF1TX_LRCLK_MODE_SHIFT 3 /* AIF1TX_LRCLK_MODE */ +#define WM8996_AIF1TX_LRCLK_MODE_WIDTH 1 /* AIF1TX_LRCLK_MODE */ +#define WM8996_AIF1TX_LRCLK_INV 0x0004 /* AIF1TX_LRCLK_INV */ +#define WM8996_AIF1TX_LRCLK_INV_MASK 0x0004 /* AIF1TX_LRCLK_INV */ +#define WM8996_AIF1TX_LRCLK_INV_SHIFT 2 /* AIF1TX_LRCLK_INV */ +#define WM8996_AIF1TX_LRCLK_INV_WIDTH 1 /* AIF1TX_LRCLK_INV */ +#define WM8996_AIF1TX_LRCLK_FRC 0x0002 /* AIF1TX_LRCLK_FRC */ +#define WM8996_AIF1TX_LRCLK_FRC_MASK 0x0002 /* AIF1TX_LRCLK_FRC */ +#define WM8996_AIF1TX_LRCLK_FRC_SHIFT 1 /* AIF1TX_LRCLK_FRC */ +#define WM8996_AIF1TX_LRCLK_FRC_WIDTH 1 /* AIF1TX_LRCLK_FRC */ +#define WM8996_AIF1TX_LRCLK_MSTR 0x0001 /* AIF1TX_LRCLK_MSTR */ +#define WM8996_AIF1TX_LRCLK_MSTR_MASK 0x0001 /* AIF1TX_LRCLK_MSTR */ +#define WM8996_AIF1TX_LRCLK_MSTR_SHIFT 0 /* AIF1TX_LRCLK_MSTR */ +#define WM8996_AIF1TX_LRCLK_MSTR_WIDTH 1 /* AIF1TX_LRCLK_MSTR */ + +/* + * R772 (0x304) - AIF1 RX LRCLK(1) + */ +#define WM8996_AIF1RX_RATE_MASK 0x07FF /* AIF1RX_RATE - [10:0] */ +#define WM8996_AIF1RX_RATE_SHIFT 0 /* AIF1RX_RATE - [10:0] */ +#define WM8996_AIF1RX_RATE_WIDTH 11 /* AIF1RX_RATE - [10:0] */ + +/* + * R773 (0x305) - AIF1 RX LRCLK(2) + */ +#define WM8996_AIF1RX_LRCLK_INV 0x0004 /* AIF1RX_LRCLK_INV */ +#define WM8996_AIF1RX_LRCLK_INV_MASK 0x0004 /* AIF1RX_LRCLK_INV */ +#define WM8996_AIF1RX_LRCLK_INV_SHIFT 2 /* AIF1RX_LRCLK_INV */ +#define WM8996_AIF1RX_LRCLK_INV_WIDTH 1 /* AIF1RX_LRCLK_INV */ +#define WM8996_AIF1RX_LRCLK_FRC 0x0002 /* AIF1RX_LRCLK_FRC */ +#define WM8996_AIF1RX_LRCLK_FRC_MASK 0x0002 /* AIF1RX_LRCLK_FRC */ +#define WM8996_AIF1RX_LRCLK_FRC_SHIFT 1 /* AIF1RX_LRCLK_FRC */ +#define WM8996_AIF1RX_LRCLK_FRC_WIDTH 1 /* AIF1RX_LRCLK_FRC */ +#define WM8996_AIF1RX_LRCLK_MSTR 0x0001 /* AIF1RX_LRCLK_MSTR */ +#define WM8996_AIF1RX_LRCLK_MSTR_MASK 0x0001 /* AIF1RX_LRCLK_MSTR */ +#define WM8996_AIF1RX_LRCLK_MSTR_SHIFT 0 /* AIF1RX_LRCLK_MSTR */ +#define WM8996_AIF1RX_LRCLK_MSTR_WIDTH 1 /* AIF1RX_LRCLK_MSTR */ + +/* + * R774 (0x306) - AIF1TX Data Configuration (1) + */ +#define WM8996_AIF1TX_WL_MASK 0xFF00 /* AIF1TX_WL - [15:8] */ +#define WM8996_AIF1TX_WL_SHIFT 8 /* AIF1TX_WL - [15:8] */ +#define WM8996_AIF1TX_WL_WIDTH 8 /* AIF1TX_WL - [15:8] */ +#define WM8996_AIF1TX_SLOT_LEN_MASK 0x00FF /* AIF1TX_SLOT_LEN - [7:0] */ +#define WM8996_AIF1TX_SLOT_LEN_SHIFT 0 /* AIF1TX_SLOT_LEN - [7:0] */ +#define WM8996_AIF1TX_SLOT_LEN_WIDTH 8 /* AIF1TX_SLOT_LEN - [7:0] */ + +/* + * R775 (0x307) - AIF1TX Data Configuration (2) + */ +#define WM8996_AIF1TX_DAT_TRI 0x0001 /* AIF1TX_DAT_TRI */ +#define WM8996_AIF1TX_DAT_TRI_MASK 0x0001 /* AIF1TX_DAT_TRI */ +#define WM8996_AIF1TX_DAT_TRI_SHIFT 0 /* AIF1TX_DAT_TRI */ +#define WM8996_AIF1TX_DAT_TRI_WIDTH 1 /* AIF1TX_DAT_TRI */ + +/* + * R776 (0x308) - AIF1RX Data Configuration + */ +#define WM8996_AIF1RX_WL_MASK 0xFF00 /* AIF1RX_WL - [15:8] */ +#define WM8996_AIF1RX_WL_SHIFT 8 /* AIF1RX_WL - [15:8] */ +#define WM8996_AIF1RX_WL_WIDTH 8 /* AIF1RX_WL - [15:8] */ +#define WM8996_AIF1RX_SLOT_LEN_MASK 0x00FF /* AIF1RX_SLOT_LEN - [7:0] */ +#define WM8996_AIF1RX_SLOT_LEN_SHIFT 0 /* AIF1RX_SLOT_LEN - [7:0] */ +#define WM8996_AIF1RX_SLOT_LEN_WIDTH 8 /* AIF1RX_SLOT_LEN - [7:0] */ + +/* + * R777 (0x309) - AIF1TX Channel 0 Configuration + */ +#define WM8996_AIF1TX_CHAN0_DAT_INV 0x8000 /* AIF1TX_CHAN0_DAT_INV */ +#define WM8996_AIF1TX_CHAN0_DAT_INV_MASK 0x8000 /* AIF1TX_CHAN0_DAT_INV */ +#define WM8996_AIF1TX_CHAN0_DAT_INV_SHIFT 15 /* AIF1TX_CHAN0_DAT_INV */ +#define WM8996_AIF1TX_CHAN0_DAT_INV_WIDTH 1 /* AIF1TX_CHAN0_DAT_INV */ +#define WM8996_AIF1TX_CHAN0_SPACING_MASK 0x7E00 /* AIF1TX_CHAN0_SPACING - [14:9] */ +#define WM8996_AIF1TX_CHAN0_SPACING_SHIFT 9 /* AIF1TX_CHAN0_SPACING - [14:9] */ +#define WM8996_AIF1TX_CHAN0_SPACING_WIDTH 6 /* AIF1TX_CHAN0_SPACING - [14:9] */ +#define WM8996_AIF1TX_CHAN0_SLOTS_MASK 0x01C0 /* AIF1TX_CHAN0_SLOTS - [8:6] */ +#define WM8996_AIF1TX_CHAN0_SLOTS_SHIFT 6 /* AIF1TX_CHAN0_SLOTS - [8:6] */ +#define WM8996_AIF1TX_CHAN0_SLOTS_WIDTH 3 /* AIF1TX_CHAN0_SLOTS - [8:6] */ +#define WM8996_AIF1TX_CHAN0_START_SLOT_MASK 0x003F /* AIF1TX_CHAN0_START_SLOT - [5:0] */ +#define WM8996_AIF1TX_CHAN0_START_SLOT_SHIFT 0 /* AIF1TX_CHAN0_START_SLOT - [5:0] */ +#define WM8996_AIF1TX_CHAN0_START_SLOT_WIDTH 6 /* AIF1TX_CHAN0_START_SLOT - [5:0] */ + +/* + * R778 (0x30A) - AIF1TX Channel 1 Configuration + */ +#define WM8996_AIF1TX_CHAN1_DAT_INV 0x8000 /* AIF1TX_CHAN1_DAT_INV */ +#define WM8996_AIF1TX_CHAN1_DAT_INV_MASK 0x8000 /* AIF1TX_CHAN1_DAT_INV */ +#define WM8996_AIF1TX_CHAN1_DAT_INV_SHIFT 15 /* AIF1TX_CHAN1_DAT_INV */ +#define WM8996_AIF1TX_CHAN1_DAT_INV_WIDTH 1 /* AIF1TX_CHAN1_DAT_INV */ +#define WM8996_AIF1TX_CHAN1_SPACING_MASK 0x7E00 /* AIF1TX_CHAN1_SPACING - [14:9] */ +#define WM8996_AIF1TX_CHAN1_SPACING_SHIFT 9 /* AIF1TX_CHAN1_SPACING - [14:9] */ +#define WM8996_AIF1TX_CHAN1_SPACING_WIDTH 6 /* AIF1TX_CHAN1_SPACING - [14:9] */ +#define WM8996_AIF1TX_CHAN1_SLOTS_MASK 0x01C0 /* AIF1TX_CHAN1_SLOTS - [8:6] */ +#define WM8996_AIF1TX_CHAN1_SLOTS_SHIFT 6 /* AIF1TX_CHAN1_SLOTS - [8:6] */ +#define WM8996_AIF1TX_CHAN1_SLOTS_WIDTH 3 /* AIF1TX_CHAN1_SLOTS - [8:6] */ +#define WM8996_AIF1TX_CHAN1_START_SLOT_MASK 0x003F /* AIF1TX_CHAN1_START_SLOT - [5:0] */ +#define WM8996_AIF1TX_CHAN1_START_SLOT_SHIFT 0 /* AIF1TX_CHAN1_START_SLOT - [5:0] */ +#define WM8996_AIF1TX_CHAN1_START_SLOT_WIDTH 6 /* AIF1TX_CHAN1_START_SLOT - [5:0] */ + +/* + * R779 (0x30B) - AIF1TX Channel 2 Configuration + */ +#define WM8996_AIF1TX_CHAN2_DAT_INV 0x8000 /* AIF1TX_CHAN2_DAT_INV */ +#define WM8996_AIF1TX_CHAN2_DAT_INV_MASK 0x8000 /* AIF1TX_CHAN2_DAT_INV */ +#define WM8996_AIF1TX_CHAN2_DAT_INV_SHIFT 15 /* AIF1TX_CHAN2_DAT_INV */ +#define WM8996_AIF1TX_CHAN2_DAT_INV_WIDTH 1 /* AIF1TX_CHAN2_DAT_INV */ +#define WM8996_AIF1TX_CHAN2_SPACING_MASK 0x7E00 /* AIF1TX_CHAN2_SPACING - [14:9] */ +#define WM8996_AIF1TX_CHAN2_SPACING_SHIFT 9 /* AIF1TX_CHAN2_SPACING - [14:9] */ +#define WM8996_AIF1TX_CHAN2_SPACING_WIDTH 6 /* AIF1TX_CHAN2_SPACING - [14:9] */ +#define WM8996_AIF1TX_CHAN2_SLOTS_MASK 0x01C0 /* AIF1TX_CHAN2_SLOTS - [8:6] */ +#define WM8996_AIF1TX_CHAN2_SLOTS_SHIFT 6 /* AIF1TX_CHAN2_SLOTS - [8:6] */ +#define WM8996_AIF1TX_CHAN2_SLOTS_WIDTH 3 /* AIF1TX_CHAN2_SLOTS - [8:6] */ +#define WM8996_AIF1TX_CHAN2_START_SLOT_MASK 0x003F /* AIF1TX_CHAN2_START_SLOT - [5:0] */ +#define WM8996_AIF1TX_CHAN2_START_SLOT_SHIFT 0 /* AIF1TX_CHAN2_START_SLOT - [5:0] */ +#define WM8996_AIF1TX_CHAN2_START_SLOT_WIDTH 6 /* AIF1TX_CHAN2_START_SLOT - [5:0] */ + +/* + * R780 (0x30C) - AIF1TX Channel 3 Configuration + */ +#define WM8996_AIF1TX_CHAN3_DAT_INV 0x8000 /* AIF1TX_CHAN3_DAT_INV */ +#define WM8996_AIF1TX_CHAN3_DAT_INV_MASK 0x8000 /* AIF1TX_CHAN3_DAT_INV */ +#define WM8996_AIF1TX_CHAN3_DAT_INV_SHIFT 15 /* AIF1TX_CHAN3_DAT_INV */ +#define WM8996_AIF1TX_CHAN3_DAT_INV_WIDTH 1 /* AIF1TX_CHAN3_DAT_INV */ +#define WM8996_AIF1TX_CHAN3_SPACING_MASK 0x7E00 /* AIF1TX_CHAN3_SPACING - [14:9] */ +#define WM8996_AIF1TX_CHAN3_SPACING_SHIFT 9 /* AIF1TX_CHAN3_SPACING - [14:9] */ +#define WM8996_AIF1TX_CHAN3_SPACING_WIDTH 6 /* AIF1TX_CHAN3_SPACING - [14:9] */ +#define WM8996_AIF1TX_CHAN3_SLOTS_MASK 0x01C0 /* AIF1TX_CHAN3_SLOTS - [8:6] */ +#define WM8996_AIF1TX_CHAN3_SLOTS_SHIFT 6 /* AIF1TX_CHAN3_SLOTS - [8:6] */ +#define WM8996_AIF1TX_CHAN3_SLOTS_WIDTH 3 /* AIF1TX_CHAN3_SLOTS - [8:6] */ +#define WM8996_AIF1TX_CHAN3_START_SLOT_MASK 0x003F /* AIF1TX_CHAN3_START_SLOT - [5:0] */ +#define WM8996_AIF1TX_CHAN3_START_SLOT_SHIFT 0 /* AIF1TX_CHAN3_START_SLOT - [5:0] */ +#define WM8996_AIF1TX_CHAN3_START_SLOT_WIDTH 6 /* AIF1TX_CHAN3_START_SLOT - [5:0] */ + +/* + * R781 (0x30D) - AIF1TX Channel 4 Configuration + */ +#define WM8996_AIF1TX_CHAN4_DAT_INV 0x8000 /* AIF1TX_CHAN4_DAT_INV */ +#define WM8996_AIF1TX_CHAN4_DAT_INV_MASK 0x8000 /* AIF1TX_CHAN4_DAT_INV */ +#define WM8996_AIF1TX_CHAN4_DAT_INV_SHIFT 15 /* AIF1TX_CHAN4_DAT_INV */ +#define WM8996_AIF1TX_CHAN4_DAT_INV_WIDTH 1 /* AIF1TX_CHAN4_DAT_INV */ +#define WM8996_AIF1TX_CHAN4_SPACING_MASK 0x7E00 /* AIF1TX_CHAN4_SPACING - [14:9] */ +#define WM8996_AIF1TX_CHAN4_SPACING_SHIFT 9 /* AIF1TX_CHAN4_SPACING - [14:9] */ +#define WM8996_AIF1TX_CHAN4_SPACING_WIDTH 6 /* AIF1TX_CHAN4_SPACING - [14:9] */ +#define WM8996_AIF1TX_CHAN4_SLOTS_MASK 0x01C0 /* AIF1TX_CHAN4_SLOTS - [8:6] */ +#define WM8996_AIF1TX_CHAN4_SLOTS_SHIFT 6 /* AIF1TX_CHAN4_SLOTS - [8:6] */ +#define WM8996_AIF1TX_CHAN4_SLOTS_WIDTH 3 /* AIF1TX_CHAN4_SLOTS - [8:6] */ +#define WM8996_AIF1TX_CHAN4_START_SLOT_MASK 0x003F /* AIF1TX_CHAN4_START_SLOT - [5:0] */ +#define WM8996_AIF1TX_CHAN4_START_SLOT_SHIFT 0 /* AIF1TX_CHAN4_START_SLOT - [5:0] */ +#define WM8996_AIF1TX_CHAN4_START_SLOT_WIDTH 6 /* AIF1TX_CHAN4_START_SLOT - [5:0] */ + +/* + * R782 (0x30E) - AIF1TX Channel 5 Configuration + */ +#define WM8996_AIF1TX_CHAN5_DAT_INV 0x8000 /* AIF1TX_CHAN5_DAT_INV */ +#define WM8996_AIF1TX_CHAN5_DAT_INV_MASK 0x8000 /* AIF1TX_CHAN5_DAT_INV */ +#define WM8996_AIF1TX_CHAN5_DAT_INV_SHIFT 15 /* AIF1TX_CHAN5_DAT_INV */ +#define WM8996_AIF1TX_CHAN5_DAT_INV_WIDTH 1 /* AIF1TX_CHAN5_DAT_INV */ +#define WM8996_AIF1TX_CHAN5_SPACING_MASK 0x7E00 /* AIF1TX_CHAN5_SPACING - [14:9] */ +#define WM8996_AIF1TX_CHAN5_SPACING_SHIFT 9 /* AIF1TX_CHAN5_SPACING - [14:9] */ +#define WM8996_AIF1TX_CHAN5_SPACING_WIDTH 6 /* AIF1TX_CHAN5_SPACING - [14:9] */ +#define WM8996_AIF1TX_CHAN5_SLOTS_MASK 0x01C0 /* AIF1TX_CHAN5_SLOTS - [8:6] */ +#define WM8996_AIF1TX_CHAN5_SLOTS_SHIFT 6 /* AIF1TX_CHAN5_SLOTS - [8:6] */ +#define WM8996_AIF1TX_CHAN5_SLOTS_WIDTH 3 /* AIF1TX_CHAN5_SLOTS - [8:6] */ +#define WM8996_AIF1TX_CHAN5_START_SLOT_MASK 0x003F /* AIF1TX_CHAN5_START_SLOT - [5:0] */ +#define WM8996_AIF1TX_CHAN5_START_SLOT_SHIFT 0 /* AIF1TX_CHAN5_START_SLOT - [5:0] */ +#define WM8996_AIF1TX_CHAN5_START_SLOT_WIDTH 6 /* AIF1TX_CHAN5_START_SLOT - [5:0] */ + +/* + * R783 (0x30F) - AIF1RX Channel 0 Configuration + */ +#define WM8996_AIF1RX_CHAN0_DAT_INV 0x8000 /* AIF1RX_CHAN0_DAT_INV */ +#define WM8996_AIF1RX_CHAN0_DAT_INV_MASK 0x8000 /* AIF1RX_CHAN0_DAT_INV */ +#define WM8996_AIF1RX_CHAN0_DAT_INV_SHIFT 15 /* AIF1RX_CHAN0_DAT_INV */ +#define WM8996_AIF1RX_CHAN0_DAT_INV_WIDTH 1 /* AIF1RX_CHAN0_DAT_INV */ +#define WM8996_AIF1RX_CHAN0_SPACING_MASK 0x7E00 /* AIF1RX_CHAN0_SPACING - [14:9] */ +#define WM8996_AIF1RX_CHAN0_SPACING_SHIFT 9 /* AIF1RX_CHAN0_SPACING - [14:9] */ +#define WM8996_AIF1RX_CHAN0_SPACING_WIDTH 6 /* AIF1RX_CHAN0_SPACING - [14:9] */ +#define WM8996_AIF1RX_CHAN0_SLOTS_MASK 0x01C0 /* AIF1RX_CHAN0_SLOTS - [8:6] */ +#define WM8996_AIF1RX_CHAN0_SLOTS_SHIFT 6 /* AIF1RX_CHAN0_SLOTS - [8:6] */ +#define WM8996_AIF1RX_CHAN0_SLOTS_WIDTH 3 /* AIF1RX_CHAN0_SLOTS - [8:6] */ +#define WM8996_AIF1RX_CHAN0_START_SLOT_MASK 0x003F /* AIF1RX_CHAN0_START_SLOT - [5:0] */ +#define WM8996_AIF1RX_CHAN0_START_SLOT_SHIFT 0 /* AIF1RX_CHAN0_START_SLOT - [5:0] */ +#define WM8996_AIF1RX_CHAN0_START_SLOT_WIDTH 6 /* AIF1RX_CHAN0_START_SLOT - [5:0] */ + +/* + * R784 (0x310) - AIF1RX Channel 1 Configuration + */ +#define WM8996_AIF1RX_CHAN1_DAT_INV 0x8000 /* AIF1RX_CHAN1_DAT_INV */ +#define WM8996_AIF1RX_CHAN1_DAT_INV_MASK 0x8000 /* AIF1RX_CHAN1_DAT_INV */ +#define WM8996_AIF1RX_CHAN1_DAT_INV_SHIFT 15 /* AIF1RX_CHAN1_DAT_INV */ +#define WM8996_AIF1RX_CHAN1_DAT_INV_WIDTH 1 /* AIF1RX_CHAN1_DAT_INV */ +#define WM8996_AIF1RX_CHAN1_SPACING_MASK 0x7E00 /* AIF1RX_CHAN1_SPACING - [14:9] */ +#define WM8996_AIF1RX_CHAN1_SPACING_SHIFT 9 /* AIF1RX_CHAN1_SPACING - [14:9] */ +#define WM8996_AIF1RX_CHAN1_SPACING_WIDTH 6 /* AIF1RX_CHAN1_SPACING - [14:9] */ +#define WM8996_AIF1RX_CHAN1_SLOTS_MASK 0x01C0 /* AIF1RX_CHAN1_SLOTS - [8:6] */ +#define WM8996_AIF1RX_CHAN1_SLOTS_SHIFT 6 /* AIF1RX_CHAN1_SLOTS - [8:6] */ +#define WM8996_AIF1RX_CHAN1_SLOTS_WIDTH 3 /* AIF1RX_CHAN1_SLOTS - [8:6] */ +#define WM8996_AIF1RX_CHAN1_START_SLOT_MASK 0x003F /* AIF1RX_CHAN1_START_SLOT - [5:0] */ +#define WM8996_AIF1RX_CHAN1_START_SLOT_SHIFT 0 /* AIF1RX_CHAN1_START_SLOT - [5:0] */ +#define WM8996_AIF1RX_CHAN1_START_SLOT_WIDTH 6 /* AIF1RX_CHAN1_START_SLOT - [5:0] */ + +/* + * R785 (0x311) - AIF1RX Channel 2 Configuration + */ +#define WM8996_AIF1RX_CHAN2_DAT_INV 0x8000 /* AIF1RX_CHAN2_DAT_INV */ +#define WM8996_AIF1RX_CHAN2_DAT_INV_MASK 0x8000 /* AIF1RX_CHAN2_DAT_INV */ +#define WM8996_AIF1RX_CHAN2_DAT_INV_SHIFT 15 /* AIF1RX_CHAN2_DAT_INV */ +#define WM8996_AIF1RX_CHAN2_DAT_INV_WIDTH 1 /* AIF1RX_CHAN2_DAT_INV */ +#define WM8996_AIF1RX_CHAN2_SPACING_MASK 0x7E00 /* AIF1RX_CHAN2_SPACING - [14:9] */ +#define WM8996_AIF1RX_CHAN2_SPACING_SHIFT 9 /* AIF1RX_CHAN2_SPACING - [14:9] */ +#define WM8996_AIF1RX_CHAN2_SPACING_WIDTH 6 /* AIF1RX_CHAN2_SPACING - [14:9] */ +#define WM8996_AIF1RX_CHAN2_SLOTS_MASK 0x01C0 /* AIF1RX_CHAN2_SLOTS - [8:6] */ +#define WM8996_AIF1RX_CHAN2_SLOTS_SHIFT 6 /* AIF1RX_CHAN2_SLOTS - [8:6] */ +#define WM8996_AIF1RX_CHAN2_SLOTS_WIDTH 3 /* AIF1RX_CHAN2_SLOTS - [8:6] */ +#define WM8996_AIF1RX_CHAN2_START_SLOT_MASK 0x003F /* AIF1RX_CHAN2_START_SLOT - [5:0] */ +#define WM8996_AIF1RX_CHAN2_START_SLOT_SHIFT 0 /* AIF1RX_CHAN2_START_SLOT - [5:0] */ +#define WM8996_AIF1RX_CHAN2_START_SLOT_WIDTH 6 /* AIF1RX_CHAN2_START_SLOT - [5:0] */ + +/* + * R786 (0x312) - AIF1RX Channel 3 Configuration + */ +#define WM8996_AIF1RX_CHAN3_DAT_INV 0x8000 /* AIF1RX_CHAN3_DAT_INV */ +#define WM8996_AIF1RX_CHAN3_DAT_INV_MASK 0x8000 /* AIF1RX_CHAN3_DAT_INV */ +#define WM8996_AIF1RX_CHAN3_DAT_INV_SHIFT 15 /* AIF1RX_CHAN3_DAT_INV */ +#define WM8996_AIF1RX_CHAN3_DAT_INV_WIDTH 1 /* AIF1RX_CHAN3_DAT_INV */ +#define WM8996_AIF1RX_CHAN3_SPACING_MASK 0x7E00 /* AIF1RX_CHAN3_SPACING - [14:9] */ +#define WM8996_AIF1RX_CHAN3_SPACING_SHIFT 9 /* AIF1RX_CHAN3_SPACING - [14:9] */ +#define WM8996_AIF1RX_CHAN3_SPACING_WIDTH 6 /* AIF1RX_CHAN3_SPACING - [14:9] */ +#define WM8996_AIF1RX_CHAN3_SLOTS_MASK 0x01C0 /* AIF1RX_CHAN3_SLOTS - [8:6] */ +#define WM8996_AIF1RX_CHAN3_SLOTS_SHIFT 6 /* AIF1RX_CHAN3_SLOTS - [8:6] */ +#define WM8996_AIF1RX_CHAN3_SLOTS_WIDTH 3 /* AIF1RX_CHAN3_SLOTS - [8:6] */ +#define WM8996_AIF1RX_CHAN3_START_SLOT_MASK 0x003F /* AIF1RX_CHAN3_START_SLOT - [5:0] */ +#define WM8996_AIF1RX_CHAN3_START_SLOT_SHIFT 0 /* AIF1RX_CHAN3_START_SLOT - [5:0] */ +#define WM8996_AIF1RX_CHAN3_START_SLOT_WIDTH 6 /* AIF1RX_CHAN3_START_SLOT - [5:0] */ + +/* + * R787 (0x313) - AIF1RX Channel 4 Configuration + */ +#define WM8996_AIF1RX_CHAN4_DAT_INV 0x8000 /* AIF1RX_CHAN4_DAT_INV */ +#define WM8996_AIF1RX_CHAN4_DAT_INV_MASK 0x8000 /* AIF1RX_CHAN4_DAT_INV */ +#define WM8996_AIF1RX_CHAN4_DAT_INV_SHIFT 15 /* AIF1RX_CHAN4_DAT_INV */ +#define WM8996_AIF1RX_CHAN4_DAT_INV_WIDTH 1 /* AIF1RX_CHAN4_DAT_INV */ +#define WM8996_AIF1RX_CHAN4_SPACING_MASK 0x7E00 /* AIF1RX_CHAN4_SPACING - [14:9] */ +#define WM8996_AIF1RX_CHAN4_SPACING_SHIFT 9 /* AIF1RX_CHAN4_SPACING - [14:9] */ +#define WM8996_AIF1RX_CHAN4_SPACING_WIDTH 6 /* AIF1RX_CHAN4_SPACING - [14:9] */ +#define WM8996_AIF1RX_CHAN4_SLOTS_MASK 0x01C0 /* AIF1RX_CHAN4_SLOTS - [8:6] */ +#define WM8996_AIF1RX_CHAN4_SLOTS_SHIFT 6 /* AIF1RX_CHAN4_SLOTS - [8:6] */ +#define WM8996_AIF1RX_CHAN4_SLOTS_WIDTH 3 /* AIF1RX_CHAN4_SLOTS - [8:6] */ +#define WM8996_AIF1RX_CHAN4_START_SLOT_MASK 0x003F /* AIF1RX_CHAN4_START_SLOT - [5:0] */ +#define WM8996_AIF1RX_CHAN4_START_SLOT_SHIFT 0 /* AIF1RX_CHAN4_START_SLOT - [5:0] */ +#define WM8996_AIF1RX_CHAN4_START_SLOT_WIDTH 6 /* AIF1RX_CHAN4_START_SLOT - [5:0] */ + +/* + * R788 (0x314) - AIF1RX Channel 5 Configuration + */ +#define WM8996_AIF1RX_CHAN5_DAT_INV 0x8000 /* AIF1RX_CHAN5_DAT_INV */ +#define WM8996_AIF1RX_CHAN5_DAT_INV_MASK 0x8000 /* AIF1RX_CHAN5_DAT_INV */ +#define WM8996_AIF1RX_CHAN5_DAT_INV_SHIFT 15 /* AIF1RX_CHAN5_DAT_INV */ +#define WM8996_AIF1RX_CHAN5_DAT_INV_WIDTH 1 /* AIF1RX_CHAN5_DAT_INV */ +#define WM8996_AIF1RX_CHAN5_SPACING_MASK 0x7E00 /* AIF1RX_CHAN5_SPACING - [14:9] */ +#define WM8996_AIF1RX_CHAN5_SPACING_SHIFT 9 /* AIF1RX_CHAN5_SPACING - [14:9] */ +#define WM8996_AIF1RX_CHAN5_SPACING_WIDTH 6 /* AIF1RX_CHAN5_SPACING - [14:9] */ +#define WM8996_AIF1RX_CHAN5_SLOTS_MASK 0x01C0 /* AIF1RX_CHAN5_SLOTS - [8:6] */ +#define WM8996_AIF1RX_CHAN5_SLOTS_SHIFT 6 /* AIF1RX_CHAN5_SLOTS - [8:6] */ +#define WM8996_AIF1RX_CHAN5_SLOTS_WIDTH 3 /* AIF1RX_CHAN5_SLOTS - [8:6] */ +#define WM8996_AIF1RX_CHAN5_START_SLOT_MASK 0x003F /* AIF1RX_CHAN5_START_SLOT - [5:0] */ +#define WM8996_AIF1RX_CHAN5_START_SLOT_SHIFT 0 /* AIF1RX_CHAN5_START_SLOT - [5:0] */ +#define WM8996_AIF1RX_CHAN5_START_SLOT_WIDTH 6 /* AIF1RX_CHAN5_START_SLOT - [5:0] */ + +/* + * R789 (0x315) - AIF1RX Mono Configuration + */ +#define WM8996_AIF1RX_CHAN4_MONO_MODE 0x0004 /* AIF1RX_CHAN4_MONO_MODE */ +#define WM8996_AIF1RX_CHAN4_MONO_MODE_MASK 0x0004 /* AIF1RX_CHAN4_MONO_MODE */ +#define WM8996_AIF1RX_CHAN4_MONO_MODE_SHIFT 2 /* AIF1RX_CHAN4_MONO_MODE */ +#define WM8996_AIF1RX_CHAN4_MONO_MODE_WIDTH 1 /* AIF1RX_CHAN4_MONO_MODE */ +#define WM8996_AIF1RX_CHAN2_MONO_MODE 0x0002 /* AIF1RX_CHAN2_MONO_MODE */ +#define WM8996_AIF1RX_CHAN2_MONO_MODE_MASK 0x0002 /* AIF1RX_CHAN2_MONO_MODE */ +#define WM8996_AIF1RX_CHAN2_MONO_MODE_SHIFT 1 /* AIF1RX_CHAN2_MONO_MODE */ +#define WM8996_AIF1RX_CHAN2_MONO_MODE_WIDTH 1 /* AIF1RX_CHAN2_MONO_MODE */ +#define WM8996_AIF1RX_CHAN0_MONO_MODE 0x0001 /* AIF1RX_CHAN0_MONO_MODE */ +#define WM8996_AIF1RX_CHAN0_MONO_MODE_MASK 0x0001 /* AIF1RX_CHAN0_MONO_MODE */ +#define WM8996_AIF1RX_CHAN0_MONO_MODE_SHIFT 0 /* AIF1RX_CHAN0_MONO_MODE */ +#define WM8996_AIF1RX_CHAN0_MONO_MODE_WIDTH 1 /* AIF1RX_CHAN0_MONO_MODE */ + +/* + * R794 (0x31A) - AIF1TX Test + */ +#define WM8996_AIF1TX45_DITHER_ENA 0x0004 /* AIF1TX45_DITHER_ENA */ +#define WM8996_AIF1TX45_DITHER_ENA_MASK 0x0004 /* AIF1TX45_DITHER_ENA */ +#define WM8996_AIF1TX45_DITHER_ENA_SHIFT 2 /* AIF1TX45_DITHER_ENA */ +#define WM8996_AIF1TX45_DITHER_ENA_WIDTH 1 /* AIF1TX45_DITHER_ENA */ +#define WM8996_AIF1TX23_DITHER_ENA 0x0002 /* AIF1TX23_DITHER_ENA */ +#define WM8996_AIF1TX23_DITHER_ENA_MASK 0x0002 /* AIF1TX23_DITHER_ENA */ +#define WM8996_AIF1TX23_DITHER_ENA_SHIFT 1 /* AIF1TX23_DITHER_ENA */ +#define WM8996_AIF1TX23_DITHER_ENA_WIDTH 1 /* AIF1TX23_DITHER_ENA */ +#define WM8996_AIF1TX01_DITHER_ENA 0x0001 /* AIF1TX01_DITHER_ENA */ +#define WM8996_AIF1TX01_DITHER_ENA_MASK 0x0001 /* AIF1TX01_DITHER_ENA */ +#define WM8996_AIF1TX01_DITHER_ENA_SHIFT 0 /* AIF1TX01_DITHER_ENA */ +#define WM8996_AIF1TX01_DITHER_ENA_WIDTH 1 /* AIF1TX01_DITHER_ENA */ + +/* + * R800 (0x320) - AIF2 Control + */ +#define WM8996_AIF2_TRI 0x0004 /* AIF2_TRI */ +#define WM8996_AIF2_TRI_MASK 0x0004 /* AIF2_TRI */ +#define WM8996_AIF2_TRI_SHIFT 2 /* AIF2_TRI */ +#define WM8996_AIF2_TRI_WIDTH 1 /* AIF2_TRI */ +#define WM8996_AIF2_FMT_MASK 0x0003 /* AIF2_FMT - [1:0] */ +#define WM8996_AIF2_FMT_SHIFT 0 /* AIF2_FMT - [1:0] */ +#define WM8996_AIF2_FMT_WIDTH 2 /* AIF2_FMT - [1:0] */ + +/* + * R801 (0x321) - AIF2 BCLK + */ +#define WM8996_AIF2_BCLK_INV 0x0400 /* AIF2_BCLK_INV */ +#define WM8996_AIF2_BCLK_INV_MASK 0x0400 /* AIF2_BCLK_INV */ +#define WM8996_AIF2_BCLK_INV_SHIFT 10 /* AIF2_BCLK_INV */ +#define WM8996_AIF2_BCLK_INV_WIDTH 1 /* AIF2_BCLK_INV */ +#define WM8996_AIF2_BCLK_FRC 0x0200 /* AIF2_BCLK_FRC */ +#define WM8996_AIF2_BCLK_FRC_MASK 0x0200 /* AIF2_BCLK_FRC */ +#define WM8996_AIF2_BCLK_FRC_SHIFT 9 /* AIF2_BCLK_FRC */ +#define WM8996_AIF2_BCLK_FRC_WIDTH 1 /* AIF2_BCLK_FRC */ +#define WM8996_AIF2_BCLK_MSTR 0x0100 /* AIF2_BCLK_MSTR */ +#define WM8996_AIF2_BCLK_MSTR_MASK 0x0100 /* AIF2_BCLK_MSTR */ +#define WM8996_AIF2_BCLK_MSTR_SHIFT 8 /* AIF2_BCLK_MSTR */ +#define WM8996_AIF2_BCLK_MSTR_WIDTH 1 /* AIF2_BCLK_MSTR */ +#define WM8996_AIF2_BCLK_DIV_MASK 0x000F /* AIF2_BCLK_DIV - [3:0] */ +#define WM8996_AIF2_BCLK_DIV_SHIFT 0 /* AIF2_BCLK_DIV - [3:0] */ +#define WM8996_AIF2_BCLK_DIV_WIDTH 4 /* AIF2_BCLK_DIV - [3:0] */ + +/* + * R802 (0x322) - AIF2 TX LRCLK(1) + */ +#define WM8996_AIF2TX_RATE_MASK 0x07FF /* AIF2TX_RATE - [10:0] */ +#define WM8996_AIF2TX_RATE_SHIFT 0 /* AIF2TX_RATE - [10:0] */ +#define WM8996_AIF2TX_RATE_WIDTH 11 /* AIF2TX_RATE - [10:0] */ + +/* + * R803 (0x323) - AIF2 TX LRCLK(2) + */ +#define WM8996_AIF2TX_LRCLK_MODE 0x0008 /* AIF2TX_LRCLK_MODE */ +#define WM8996_AIF2TX_LRCLK_MODE_MASK 0x0008 /* AIF2TX_LRCLK_MODE */ +#define WM8996_AIF2TX_LRCLK_MODE_SHIFT 3 /* AIF2TX_LRCLK_MODE */ +#define WM8996_AIF2TX_LRCLK_MODE_WIDTH 1 /* AIF2TX_LRCLK_MODE */ +#define WM8996_AIF2TX_LRCLK_INV 0x0004 /* AIF2TX_LRCLK_INV */ +#define WM8996_AIF2TX_LRCLK_INV_MASK 0x0004 /* AIF2TX_LRCLK_INV */ +#define WM8996_AIF2TX_LRCLK_INV_SHIFT 2 /* AIF2TX_LRCLK_INV */ +#define WM8996_AIF2TX_LRCLK_INV_WIDTH 1 /* AIF2TX_LRCLK_INV */ +#define WM8996_AIF2TX_LRCLK_FRC 0x0002 /* AIF2TX_LRCLK_FRC */ +#define WM8996_AIF2TX_LRCLK_FRC_MASK 0x0002 /* AIF2TX_LRCLK_FRC */ +#define WM8996_AIF2TX_LRCLK_FRC_SHIFT 1 /* AIF2TX_LRCLK_FRC */ +#define WM8996_AIF2TX_LRCLK_FRC_WIDTH 1 /* AIF2TX_LRCLK_FRC */ +#define WM8996_AIF2TX_LRCLK_MSTR 0x0001 /* AIF2TX_LRCLK_MSTR */ +#define WM8996_AIF2TX_LRCLK_MSTR_MASK 0x0001 /* AIF2TX_LRCLK_MSTR */ +#define WM8996_AIF2TX_LRCLK_MSTR_SHIFT 0 /* AIF2TX_LRCLK_MSTR */ +#define WM8996_AIF2TX_LRCLK_MSTR_WIDTH 1 /* AIF2TX_LRCLK_MSTR */ + +/* + * R804 (0x324) - AIF2 RX LRCLK(1) + */ +#define WM8996_AIF2RX_RATE_MASK 0x07FF /* AIF2RX_RATE - [10:0] */ +#define WM8996_AIF2RX_RATE_SHIFT 0 /* AIF2RX_RATE - [10:0] */ +#define WM8996_AIF2RX_RATE_WIDTH 11 /* AIF2RX_RATE - [10:0] */ + +/* + * R805 (0x325) - AIF2 RX LRCLK(2) + */ +#define WM8996_AIF2RX_LRCLK_INV 0x0004 /* AIF2RX_LRCLK_INV */ +#define WM8996_AIF2RX_LRCLK_INV_MASK 0x0004 /* AIF2RX_LRCLK_INV */ +#define WM8996_AIF2RX_LRCLK_INV_SHIFT 2 /* AIF2RX_LRCLK_INV */ +#define WM8996_AIF2RX_LRCLK_INV_WIDTH 1 /* AIF2RX_LRCLK_INV */ +#define WM8996_AIF2RX_LRCLK_FRC 0x0002 /* AIF2RX_LRCLK_FRC */ +#define WM8996_AIF2RX_LRCLK_FRC_MASK 0x0002 /* AIF2RX_LRCLK_FRC */ +#define WM8996_AIF2RX_LRCLK_FRC_SHIFT 1 /* AIF2RX_LRCLK_FRC */ +#define WM8996_AIF2RX_LRCLK_FRC_WIDTH 1 /* AIF2RX_LRCLK_FRC */ +#define WM8996_AIF2RX_LRCLK_MSTR 0x0001 /* AIF2RX_LRCLK_MSTR */ +#define WM8996_AIF2RX_LRCLK_MSTR_MASK 0x0001 /* AIF2RX_LRCLK_MSTR */ +#define WM8996_AIF2RX_LRCLK_MSTR_SHIFT 0 /* AIF2RX_LRCLK_MSTR */ +#define WM8996_AIF2RX_LRCLK_MSTR_WIDTH 1 /* AIF2RX_LRCLK_MSTR */ + +/* + * R806 (0x326) - AIF2TX Data Configuration (1) + */ +#define WM8996_AIF2TX_WL_MASK 0xFF00 /* AIF2TX_WL - [15:8] */ +#define WM8996_AIF2TX_WL_SHIFT 8 /* AIF2TX_WL - [15:8] */ +#define WM8996_AIF2TX_WL_WIDTH 8 /* AIF2TX_WL - [15:8] */ +#define WM8996_AIF2TX_SLOT_LEN_MASK 0x00FF /* AIF2TX_SLOT_LEN - [7:0] */ +#define WM8996_AIF2TX_SLOT_LEN_SHIFT 0 /* AIF2TX_SLOT_LEN - [7:0] */ +#define WM8996_AIF2TX_SLOT_LEN_WIDTH 8 /* AIF2TX_SLOT_LEN - [7:0] */ + +/* + * R807 (0x327) - AIF2TX Data Configuration (2) + */ +#define WM8996_AIF2TX_DAT_TRI 0x0001 /* AIF2TX_DAT_TRI */ +#define WM8996_AIF2TX_DAT_TRI_MASK 0x0001 /* AIF2TX_DAT_TRI */ +#define WM8996_AIF2TX_DAT_TRI_SHIFT 0 /* AIF2TX_DAT_TRI */ +#define WM8996_AIF2TX_DAT_TRI_WIDTH 1 /* AIF2TX_DAT_TRI */ + +/* + * R808 (0x328) - AIF2RX Data Configuration + */ +#define WM8996_AIF2RX_WL_MASK 0xFF00 /* AIF2RX_WL - [15:8] */ +#define WM8996_AIF2RX_WL_SHIFT 8 /* AIF2RX_WL - [15:8] */ +#define WM8996_AIF2RX_WL_WIDTH 8 /* AIF2RX_WL - [15:8] */ +#define WM8996_AIF2RX_SLOT_LEN_MASK 0x00FF /* AIF2RX_SLOT_LEN - [7:0] */ +#define WM8996_AIF2RX_SLOT_LEN_SHIFT 0 /* AIF2RX_SLOT_LEN - [7:0] */ +#define WM8996_AIF2RX_SLOT_LEN_WIDTH 8 /* AIF2RX_SLOT_LEN - [7:0] */ + +/* + * R809 (0x329) - AIF2TX Channel 0 Configuration + */ +#define WM8996_AIF2TX_CHAN0_DAT_INV 0x8000 /* AIF2TX_CHAN0_DAT_INV */ +#define WM8996_AIF2TX_CHAN0_DAT_INV_MASK 0x8000 /* AIF2TX_CHAN0_DAT_INV */ +#define WM8996_AIF2TX_CHAN0_DAT_INV_SHIFT 15 /* AIF2TX_CHAN0_DAT_INV */ +#define WM8996_AIF2TX_CHAN0_DAT_INV_WIDTH 1 /* AIF2TX_CHAN0_DAT_INV */ +#define WM8996_AIF2TX_CHAN0_SPACING_MASK 0x7E00 /* AIF2TX_CHAN0_SPACING - [14:9] */ +#define WM8996_AIF2TX_CHAN0_SPACING_SHIFT 9 /* AIF2TX_CHAN0_SPACING - [14:9] */ +#define WM8996_AIF2TX_CHAN0_SPACING_WIDTH 6 /* AIF2TX_CHAN0_SPACING - [14:9] */ +#define WM8996_AIF2TX_CHAN0_SLOTS_MASK 0x01C0 /* AIF2TX_CHAN0_SLOTS - [8:6] */ +#define WM8996_AIF2TX_CHAN0_SLOTS_SHIFT 6 /* AIF2TX_CHAN0_SLOTS - [8:6] */ +#define WM8996_AIF2TX_CHAN0_SLOTS_WIDTH 3 /* AIF2TX_CHAN0_SLOTS - [8:6] */ +#define WM8996_AIF2TX_CHAN0_START_SLOT_MASK 0x003F /* AIF2TX_CHAN0_START_SLOT - [5:0] */ +#define WM8996_AIF2TX_CHAN0_START_SLOT_SHIFT 0 /* AIF2TX_CHAN0_START_SLOT - [5:0] */ +#define WM8996_AIF2TX_CHAN0_START_SLOT_WIDTH 6 /* AIF2TX_CHAN0_START_SLOT - [5:0] */ + +/* + * R810 (0x32A) - AIF2TX Channel 1 Configuration + */ +#define WM8996_AIF2TX_CHAN1_DAT_INV 0x8000 /* AIF2TX_CHAN1_DAT_INV */ +#define WM8996_AIF2TX_CHAN1_DAT_INV_MASK 0x8000 /* AIF2TX_CHAN1_DAT_INV */ +#define WM8996_AIF2TX_CHAN1_DAT_INV_SHIFT 15 /* AIF2TX_CHAN1_DAT_INV */ +#define WM8996_AIF2TX_CHAN1_DAT_INV_WIDTH 1 /* AIF2TX_CHAN1_DAT_INV */ +#define WM8996_AIF2TX_CHAN1_SPACING_MASK 0x7E00 /* AIF2TX_CHAN1_SPACING - [14:9] */ +#define WM8996_AIF2TX_CHAN1_SPACING_SHIFT 9 /* AIF2TX_CHAN1_SPACING - [14:9] */ +#define WM8996_AIF2TX_CHAN1_SPACING_WIDTH 6 /* AIF2TX_CHAN1_SPACING - [14:9] */ +#define WM8996_AIF2TX_CHAN1_SLOTS_MASK 0x01C0 /* AIF2TX_CHAN1_SLOTS - [8:6] */ +#define WM8996_AIF2TX_CHAN1_SLOTS_SHIFT 6 /* AIF2TX_CHAN1_SLOTS - [8:6] */ +#define WM8996_AIF2TX_CHAN1_SLOTS_WIDTH 3 /* AIF2TX_CHAN1_SLOTS - [8:6] */ +#define WM8996_AIF2TX_CHAN1_START_SLOT_MASK 0x003F /* AIF2TX_CHAN1_START_SLOT - [5:0] */ +#define WM8996_AIF2TX_CHAN1_START_SLOT_SHIFT 0 /* AIF2TX_CHAN1_START_SLOT - [5:0] */ +#define WM8996_AIF2TX_CHAN1_START_SLOT_WIDTH 6 /* AIF2TX_CHAN1_START_SLOT - [5:0] */ + +/* + * R811 (0x32B) - AIF2RX Channel 0 Configuration + */ +#define WM8996_AIF2RX_CHAN0_DAT_INV 0x8000 /* AIF2RX_CHAN0_DAT_INV */ +#define WM8996_AIF2RX_CHAN0_DAT_INV_MASK 0x8000 /* AIF2RX_CHAN0_DAT_INV */ +#define WM8996_AIF2RX_CHAN0_DAT_INV_SHIFT 15 /* AIF2RX_CHAN0_DAT_INV */ +#define WM8996_AIF2RX_CHAN0_DAT_INV_WIDTH 1 /* AIF2RX_CHAN0_DAT_INV */ +#define WM8996_AIF2RX_CHAN0_SPACING_MASK 0x7E00 /* AIF2RX_CHAN0_SPACING - [14:9] */ +#define WM8996_AIF2RX_CHAN0_SPACING_SHIFT 9 /* AIF2RX_CHAN0_SPACING - [14:9] */ +#define WM8996_AIF2RX_CHAN0_SPACING_WIDTH 6 /* AIF2RX_CHAN0_SPACING - [14:9] */ +#define WM8996_AIF2RX_CHAN0_SLOTS_MASK 0x01C0 /* AIF2RX_CHAN0_SLOTS - [8:6] */ +#define WM8996_AIF2RX_CHAN0_SLOTS_SHIFT 6 /* AIF2RX_CHAN0_SLOTS - [8:6] */ +#define WM8996_AIF2RX_CHAN0_SLOTS_WIDTH 3 /* AIF2RX_CHAN0_SLOTS - [8:6] */ +#define WM8996_AIF2RX_CHAN0_START_SLOT_MASK 0x003F /* AIF2RX_CHAN0_START_SLOT - [5:0] */ +#define WM8996_AIF2RX_CHAN0_START_SLOT_SHIFT 0 /* AIF2RX_CHAN0_START_SLOT - [5:0] */ +#define WM8996_AIF2RX_CHAN0_START_SLOT_WIDTH 6 /* AIF2RX_CHAN0_START_SLOT - [5:0] */ + +/* + * R812 (0x32C) - AIF2RX Channel 1 Configuration + */ +#define WM8996_AIF2RX_CHAN1_DAT_INV 0x8000 /* AIF2RX_CHAN1_DAT_INV */ +#define WM8996_AIF2RX_CHAN1_DAT_INV_MASK 0x8000 /* AIF2RX_CHAN1_DAT_INV */ +#define WM8996_AIF2RX_CHAN1_DAT_INV_SHIFT 15 /* AIF2RX_CHAN1_DAT_INV */ +#define WM8996_AIF2RX_CHAN1_DAT_INV_WIDTH 1 /* AIF2RX_CHAN1_DAT_INV */ +#define WM8996_AIF2RX_CHAN1_SPACING_MASK 0x7E00 /* AIF2RX_CHAN1_SPACING - [14:9] */ +#define WM8996_AIF2RX_CHAN1_SPACING_SHIFT 9 /* AIF2RX_CHAN1_SPACING - [14:9] */ +#define WM8996_AIF2RX_CHAN1_SPACING_WIDTH 6 /* AIF2RX_CHAN1_SPACING - [14:9] */ +#define WM8996_AIF2RX_CHAN1_SLOTS_MASK 0x01C0 /* AIF2RX_CHAN1_SLOTS - [8:6] */ +#define WM8996_AIF2RX_CHAN1_SLOTS_SHIFT 6 /* AIF2RX_CHAN1_SLOTS - [8:6] */ +#define WM8996_AIF2RX_CHAN1_SLOTS_WIDTH 3 /* AIF2RX_CHAN1_SLOTS - [8:6] */ +#define WM8996_AIF2RX_CHAN1_START_SLOT_MASK 0x003F /* AIF2RX_CHAN1_START_SLOT - [5:0] */ +#define WM8996_AIF2RX_CHAN1_START_SLOT_SHIFT 0 /* AIF2RX_CHAN1_START_SLOT - [5:0] */ +#define WM8996_AIF2RX_CHAN1_START_SLOT_WIDTH 6 /* AIF2RX_CHAN1_START_SLOT - [5:0] */ + +/* + * R813 (0x32D) - AIF2RX Mono Configuration + */ +#define WM8996_AIF2RX_CHAN0_MONO_MODE 0x0001 /* AIF2RX_CHAN0_MONO_MODE */ +#define WM8996_AIF2RX_CHAN0_MONO_MODE_MASK 0x0001 /* AIF2RX_CHAN0_MONO_MODE */ +#define WM8996_AIF2RX_CHAN0_MONO_MODE_SHIFT 0 /* AIF2RX_CHAN0_MONO_MODE */ +#define WM8996_AIF2RX_CHAN0_MONO_MODE_WIDTH 1 /* AIF2RX_CHAN0_MONO_MODE */ + +/* + * R815 (0x32F) - AIF2TX Test + */ +#define WM8996_AIF2TX_DITHER_ENA 0x0001 /* AIF2TX_DITHER_ENA */ +#define WM8996_AIF2TX_DITHER_ENA_MASK 0x0001 /* AIF2TX_DITHER_ENA */ +#define WM8996_AIF2TX_DITHER_ENA_SHIFT 0 /* AIF2TX_DITHER_ENA */ +#define WM8996_AIF2TX_DITHER_ENA_WIDTH 1 /* AIF2TX_DITHER_ENA */ + +/* + * R1024 (0x400) - DSP1 TX Left Volume + */ +#define WM8996_DSP1TX_VU 0x0100 /* DSP1TX_VU */ +#define WM8996_DSP1TX_VU_MASK 0x0100 /* DSP1TX_VU */ +#define WM8996_DSP1TX_VU_SHIFT 8 /* DSP1TX_VU */ +#define WM8996_DSP1TX_VU_WIDTH 1 /* DSP1TX_VU */ +#define WM8996_DSP1TXL_VOL_MASK 0x00FF /* DSP1TXL_VOL - [7:0] */ +#define WM8996_DSP1TXL_VOL_SHIFT 0 /* DSP1TXL_VOL - [7:0] */ +#define WM8996_DSP1TXL_VOL_WIDTH 8 /* DSP1TXL_VOL - [7:0] */ + +/* + * R1025 (0x401) - DSP1 TX Right Volume + */ +#define WM8996_DSP1TX_VU 0x0100 /* DSP1TX_VU */ +#define WM8996_DSP1TX_VU_MASK 0x0100 /* DSP1TX_VU */ +#define WM8996_DSP1TX_VU_SHIFT 8 /* DSP1TX_VU */ +#define WM8996_DSP1TX_VU_WIDTH 1 /* DSP1TX_VU */ +#define WM8996_DSP1TXR_VOL_MASK 0x00FF /* DSP1TXR_VOL - [7:0] */ +#define WM8996_DSP1TXR_VOL_SHIFT 0 /* DSP1TXR_VOL - [7:0] */ +#define WM8996_DSP1TXR_VOL_WIDTH 8 /* DSP1TXR_VOL - [7:0] */ + +/* + * R1026 (0x402) - DSP1 RX Left Volume + */ +#define WM8996_DSP1RX_VU 0x0100 /* DSP1RX_VU */ +#define WM8996_DSP1RX_VU_MASK 0x0100 /* DSP1RX_VU */ +#define WM8996_DSP1RX_VU_SHIFT 8 /* DSP1RX_VU */ +#define WM8996_DSP1RX_VU_WIDTH 1 /* DSP1RX_VU */ +#define WM8996_DSP1RXL_VOL_MASK 0x00FF /* DSP1RXL_VOL - [7:0] */ +#define WM8996_DSP1RXL_VOL_SHIFT 0 /* DSP1RXL_VOL - [7:0] */ +#define WM8996_DSP1RXL_VOL_WIDTH 8 /* DSP1RXL_VOL - [7:0] */ + +/* + * R1027 (0x403) - DSP1 RX Right Volume + */ +#define WM8996_DSP1RX_VU 0x0100 /* DSP1RX_VU */ +#define WM8996_DSP1RX_VU_MASK 0x0100 /* DSP1RX_VU */ +#define WM8996_DSP1RX_VU_SHIFT 8 /* DSP1RX_VU */ +#define WM8996_DSP1RX_VU_WIDTH 1 /* DSP1RX_VU */ +#define WM8996_DSP1RXR_VOL_MASK 0x00FF /* DSP1RXR_VOL - [7:0] */ +#define WM8996_DSP1RXR_VOL_SHIFT 0 /* DSP1RXR_VOL - [7:0] */ +#define WM8996_DSP1RXR_VOL_WIDTH 8 /* DSP1RXR_VOL - [7:0] */ + +/* + * R1040 (0x410) - DSP1 TX Filters + */ +#define WM8996_DSP1TX_NF 0x2000 /* DSP1TX_NF */ +#define WM8996_DSP1TX_NF_MASK 0x2000 /* DSP1TX_NF */ +#define WM8996_DSP1TX_NF_SHIFT 13 /* DSP1TX_NF */ +#define WM8996_DSP1TX_NF_WIDTH 1 /* DSP1TX_NF */ +#define WM8996_DSP1TXL_HPF 0x1000 /* DSP1TXL_HPF */ +#define WM8996_DSP1TXL_HPF_MASK 0x1000 /* DSP1TXL_HPF */ +#define WM8996_DSP1TXL_HPF_SHIFT 12 /* DSP1TXL_HPF */ +#define WM8996_DSP1TXL_HPF_WIDTH 1 /* DSP1TXL_HPF */ +#define WM8996_DSP1TXR_HPF 0x0800 /* DSP1TXR_HPF */ +#define WM8996_DSP1TXR_HPF_MASK 0x0800 /* DSP1TXR_HPF */ +#define WM8996_DSP1TXR_HPF_SHIFT 11 /* DSP1TXR_HPF */ +#define WM8996_DSP1TXR_HPF_WIDTH 1 /* DSP1TXR_HPF */ +#define WM8996_DSP1TX_HPF_MODE_MASK 0x0018 /* DSP1TX_HPF_MODE - [4:3] */ +#define WM8996_DSP1TX_HPF_MODE_SHIFT 3 /* DSP1TX_HPF_MODE - [4:3] */ +#define WM8996_DSP1TX_HPF_MODE_WIDTH 2 /* DSP1TX_HPF_MODE - [4:3] */ +#define WM8996_DSP1TX_HPF_CUT_MASK 0x0007 /* DSP1TX_HPF_CUT - [2:0] */ +#define WM8996_DSP1TX_HPF_CUT_SHIFT 0 /* DSP1TX_HPF_CUT - [2:0] */ +#define WM8996_DSP1TX_HPF_CUT_WIDTH 3 /* DSP1TX_HPF_CUT - [2:0] */ + +/* + * R1056 (0x420) - DSP1 RX Filters (1) + */ +#define WM8996_DSP1RX_MUTE 0x0200 /* DSP1RX_MUTE */ +#define WM8996_DSP1RX_MUTE_MASK 0x0200 /* DSP1RX_MUTE */ +#define WM8996_DSP1RX_MUTE_SHIFT 9 /* DSP1RX_MUTE */ +#define WM8996_DSP1RX_MUTE_WIDTH 1 /* DSP1RX_MUTE */ +#define WM8996_DSP1RX_MONO 0x0080 /* DSP1RX_MONO */ +#define WM8996_DSP1RX_MONO_MASK 0x0080 /* DSP1RX_MONO */ +#define WM8996_DSP1RX_MONO_SHIFT 7 /* DSP1RX_MONO */ +#define WM8996_DSP1RX_MONO_WIDTH 1 /* DSP1RX_MONO */ +#define WM8996_DSP1RX_MUTERATE 0x0020 /* DSP1RX_MUTERATE */ +#define WM8996_DSP1RX_MUTERATE_MASK 0x0020 /* DSP1RX_MUTERATE */ +#define WM8996_DSP1RX_MUTERATE_SHIFT 5 /* DSP1RX_MUTERATE */ +#define WM8996_DSP1RX_MUTERATE_WIDTH 1 /* DSP1RX_MUTERATE */ +#define WM8996_DSP1RX_UNMUTE_RAMP 0x0010 /* DSP1RX_UNMUTE_RAMP */ +#define WM8996_DSP1RX_UNMUTE_RAMP_MASK 0x0010 /* DSP1RX_UNMUTE_RAMP */ +#define WM8996_DSP1RX_UNMUTE_RAMP_SHIFT 4 /* DSP1RX_UNMUTE_RAMP */ +#define WM8996_DSP1RX_UNMUTE_RAMP_WIDTH 1 /* DSP1RX_UNMUTE_RAMP */ + +/* + * R1057 (0x421) - DSP1 RX Filters (2) + */ +#define WM8996_DSP1RX_3D_GAIN_MASK 0x3E00 /* DSP1RX_3D_GAIN - [13:9] */ +#define WM8996_DSP1RX_3D_GAIN_SHIFT 9 /* DSP1RX_3D_GAIN - [13:9] */ +#define WM8996_DSP1RX_3D_GAIN_WIDTH 5 /* DSP1RX_3D_GAIN - [13:9] */ +#define WM8996_DSP1RX_3D_ENA 0x0100 /* DSP1RX_3D_ENA */ +#define WM8996_DSP1RX_3D_ENA_MASK 0x0100 /* DSP1RX_3D_ENA */ +#define WM8996_DSP1RX_3D_ENA_SHIFT 8 /* DSP1RX_3D_ENA */ +#define WM8996_DSP1RX_3D_ENA_WIDTH 1 /* DSP1RX_3D_ENA */ + +/* + * R1088 (0x440) - DSP1 DRC (1) + */ +#define WM8996_DSP1DRC_SIG_DET_RMS_MASK 0xF800 /* DSP1DRC_SIG_DET_RMS - [15:11] */ +#define WM8996_DSP1DRC_SIG_DET_RMS_SHIFT 11 /* DSP1DRC_SIG_DET_RMS - [15:11] */ +#define WM8996_DSP1DRC_SIG_DET_RMS_WIDTH 5 /* DSP1DRC_SIG_DET_RMS - [15:11] */ +#define WM8996_DSP1DRC_SIG_DET_PK_MASK 0x0600 /* DSP1DRC_SIG_DET_PK - [10:9] */ +#define WM8996_DSP1DRC_SIG_DET_PK_SHIFT 9 /* DSP1DRC_SIG_DET_PK - [10:9] */ +#define WM8996_DSP1DRC_SIG_DET_PK_WIDTH 2 /* DSP1DRC_SIG_DET_PK - [10:9] */ +#define WM8996_DSP1DRC_NG_ENA 0x0100 /* DSP1DRC_NG_ENA */ +#define WM8996_DSP1DRC_NG_ENA_MASK 0x0100 /* DSP1DRC_NG_ENA */ +#define WM8996_DSP1DRC_NG_ENA_SHIFT 8 /* DSP1DRC_NG_ENA */ +#define WM8996_DSP1DRC_NG_ENA_WIDTH 1 /* DSP1DRC_NG_ENA */ +#define WM8996_DSP1DRC_SIG_DET_MODE 0x0080 /* DSP1DRC_SIG_DET_MODE */ +#define WM8996_DSP1DRC_SIG_DET_MODE_MASK 0x0080 /* DSP1DRC_SIG_DET_MODE */ +#define WM8996_DSP1DRC_SIG_DET_MODE_SHIFT 7 /* DSP1DRC_SIG_DET_MODE */ +#define WM8996_DSP1DRC_SIG_DET_MODE_WIDTH 1 /* DSP1DRC_SIG_DET_MODE */ +#define WM8996_DSP1DRC_SIG_DET 0x0040 /* DSP1DRC_SIG_DET */ +#define WM8996_DSP1DRC_SIG_DET_MASK 0x0040 /* DSP1DRC_SIG_DET */ +#define WM8996_DSP1DRC_SIG_DET_SHIFT 6 /* DSP1DRC_SIG_DET */ +#define WM8996_DSP1DRC_SIG_DET_WIDTH 1 /* DSP1DRC_SIG_DET */ +#define WM8996_DSP1DRC_KNEE2_OP_ENA 0x0020 /* DSP1DRC_KNEE2_OP_ENA */ +#define WM8996_DSP1DRC_KNEE2_OP_ENA_MASK 0x0020 /* DSP1DRC_KNEE2_OP_ENA */ +#define WM8996_DSP1DRC_KNEE2_OP_ENA_SHIFT 5 /* DSP1DRC_KNEE2_OP_ENA */ +#define WM8996_DSP1DRC_KNEE2_OP_ENA_WIDTH 1 /* DSP1DRC_KNEE2_OP_ENA */ +#define WM8996_DSP1DRC_QR 0x0010 /* DSP1DRC_QR */ +#define WM8996_DSP1DRC_QR_MASK 0x0010 /* DSP1DRC_QR */ +#define WM8996_DSP1DRC_QR_SHIFT 4 /* DSP1DRC_QR */ +#define WM8996_DSP1DRC_QR_WIDTH 1 /* DSP1DRC_QR */ +#define WM8996_DSP1DRC_ANTICLIP 0x0008 /* DSP1DRC_ANTICLIP */ +#define WM8996_DSP1DRC_ANTICLIP_MASK 0x0008 /* DSP1DRC_ANTICLIP */ +#define WM8996_DSP1DRC_ANTICLIP_SHIFT 3 /* DSP1DRC_ANTICLIP */ +#define WM8996_DSP1DRC_ANTICLIP_WIDTH 1 /* DSP1DRC_ANTICLIP */ +#define WM8996_DSP1RX_DRC_ENA 0x0004 /* DSP1RX_DRC_ENA */ +#define WM8996_DSP1RX_DRC_ENA_MASK 0x0004 /* DSP1RX_DRC_ENA */ +#define WM8996_DSP1RX_DRC_ENA_SHIFT 2 /* DSP1RX_DRC_ENA */ +#define WM8996_DSP1RX_DRC_ENA_WIDTH 1 /* DSP1RX_DRC_ENA */ +#define WM8996_DSP1TXL_DRC_ENA 0x0002 /* DSP1TXL_DRC_ENA */ +#define WM8996_DSP1TXL_DRC_ENA_MASK 0x0002 /* DSP1TXL_DRC_ENA */ +#define WM8996_DSP1TXL_DRC_ENA_SHIFT 1 /* DSP1TXL_DRC_ENA */ +#define WM8996_DSP1TXL_DRC_ENA_WIDTH 1 /* DSP1TXL_DRC_ENA */ +#define WM8996_DSP1TXR_DRC_ENA 0x0001 /* DSP1TXR_DRC_ENA */ +#define WM8996_DSP1TXR_DRC_ENA_MASK 0x0001 /* DSP1TXR_DRC_ENA */ +#define WM8996_DSP1TXR_DRC_ENA_SHIFT 0 /* DSP1TXR_DRC_ENA */ +#define WM8996_DSP1TXR_DRC_ENA_WIDTH 1 /* DSP1TXR_DRC_ENA */ + +/* + * R1089 (0x441) - DSP1 DRC (2) + */ +#define WM8996_DSP1DRC_ATK_MASK 0x1E00 /* DSP1DRC_ATK - [12:9] */ +#define WM8996_DSP1DRC_ATK_SHIFT 9 /* DSP1DRC_ATK - [12:9] */ +#define WM8996_DSP1DRC_ATK_WIDTH 4 /* DSP1DRC_ATK - [12:9] */ +#define WM8996_DSP1DRC_DCY_MASK 0x01E0 /* DSP1DRC_DCY - [8:5] */ +#define WM8996_DSP1DRC_DCY_SHIFT 5 /* DSP1DRC_DCY - [8:5] */ +#define WM8996_DSP1DRC_DCY_WIDTH 4 /* DSP1DRC_DCY - [8:5] */ +#define WM8996_DSP1DRC_MINGAIN_MASK 0x001C /* DSP1DRC_MINGAIN - [4:2] */ +#define WM8996_DSP1DRC_MINGAIN_SHIFT 2 /* DSP1DRC_MINGAIN - [4:2] */ +#define WM8996_DSP1DRC_MINGAIN_WIDTH 3 /* DSP1DRC_MINGAIN - [4:2] */ +#define WM8996_DSP1DRC_MAXGAIN_MASK 0x0003 /* DSP1DRC_MAXGAIN - [1:0] */ +#define WM8996_DSP1DRC_MAXGAIN_SHIFT 0 /* DSP1DRC_MAXGAIN - [1:0] */ +#define WM8996_DSP1DRC_MAXGAIN_WIDTH 2 /* DSP1DRC_MAXGAIN - [1:0] */ + +/* + * R1090 (0x442) - DSP1 DRC (3) + */ +#define WM8996_DSP1DRC_NG_MINGAIN_MASK 0xF000 /* DSP1DRC_NG_MINGAIN - [15:12] */ +#define WM8996_DSP1DRC_NG_MINGAIN_SHIFT 12 /* DSP1DRC_NG_MINGAIN - [15:12] */ +#define WM8996_DSP1DRC_NG_MINGAIN_WIDTH 4 /* DSP1DRC_NG_MINGAIN - [15:12] */ +#define WM8996_DSP1DRC_NG_EXP_MASK 0x0C00 /* DSP1DRC_NG_EXP - [11:10] */ +#define WM8996_DSP1DRC_NG_EXP_SHIFT 10 /* DSP1DRC_NG_EXP - [11:10] */ +#define WM8996_DSP1DRC_NG_EXP_WIDTH 2 /* DSP1DRC_NG_EXP - [11:10] */ +#define WM8996_DSP1DRC_QR_THR_MASK 0x0300 /* DSP1DRC_QR_THR - [9:8] */ +#define WM8996_DSP1DRC_QR_THR_SHIFT 8 /* DSP1DRC_QR_THR - [9:8] */ +#define WM8996_DSP1DRC_QR_THR_WIDTH 2 /* DSP1DRC_QR_THR - [9:8] */ +#define WM8996_DSP1DRC_QR_DCY_MASK 0x00C0 /* DSP1DRC_QR_DCY - [7:6] */ +#define WM8996_DSP1DRC_QR_DCY_SHIFT 6 /* DSP1DRC_QR_DCY - [7:6] */ +#define WM8996_DSP1DRC_QR_DCY_WIDTH 2 /* DSP1DRC_QR_DCY - [7:6] */ +#define WM8996_DSP1DRC_HI_COMP_MASK 0x0038 /* DSP1DRC_HI_COMP - [5:3] */ +#define WM8996_DSP1DRC_HI_COMP_SHIFT 3 /* DSP1DRC_HI_COMP - [5:3] */ +#define WM8996_DSP1DRC_HI_COMP_WIDTH 3 /* DSP1DRC_HI_COMP - [5:3] */ +#define WM8996_DSP1DRC_LO_COMP_MASK 0x0007 /* DSP1DRC_LO_COMP - [2:0] */ +#define WM8996_DSP1DRC_LO_COMP_SHIFT 0 /* DSP1DRC_LO_COMP - [2:0] */ +#define WM8996_DSP1DRC_LO_COMP_WIDTH 3 /* DSP1DRC_LO_COMP - [2:0] */ + +/* + * R1091 (0x443) - DSP1 DRC (4) + */ +#define WM8996_DSP1DRC_KNEE_IP_MASK 0x07E0 /* DSP1DRC_KNEE_IP - [10:5] */ +#define WM8996_DSP1DRC_KNEE_IP_SHIFT 5 /* DSP1DRC_KNEE_IP - [10:5] */ +#define WM8996_DSP1DRC_KNEE_IP_WIDTH 6 /* DSP1DRC_KNEE_IP - [10:5] */ +#define WM8996_DSP1DRC_KNEE_OP_MASK 0x001F /* DSP1DRC_KNEE_OP - [4:0] */ +#define WM8996_DSP1DRC_KNEE_OP_SHIFT 0 /* DSP1DRC_KNEE_OP - [4:0] */ +#define WM8996_DSP1DRC_KNEE_OP_WIDTH 5 /* DSP1DRC_KNEE_OP - [4:0] */ + +/* + * R1092 (0x444) - DSP1 DRC (5) + */ +#define WM8996_DSP1DRC_KNEE2_IP_MASK 0x03E0 /* DSP1DRC_KNEE2_IP - [9:5] */ +#define WM8996_DSP1DRC_KNEE2_IP_SHIFT 5 /* DSP1DRC_KNEE2_IP - [9:5] */ +#define WM8996_DSP1DRC_KNEE2_IP_WIDTH 5 /* DSP1DRC_KNEE2_IP - [9:5] */ +#define WM8996_DSP1DRC_KNEE2_OP_MASK 0x001F /* DSP1DRC_KNEE2_OP - [4:0] */ +#define WM8996_DSP1DRC_KNEE2_OP_SHIFT 0 /* DSP1DRC_KNEE2_OP - [4:0] */ +#define WM8996_DSP1DRC_KNEE2_OP_WIDTH 5 /* DSP1DRC_KNEE2_OP - [4:0] */ + +/* + * R1152 (0x480) - DSP1 RX EQ Gains (1) + */ +#define WM8996_DSP1RX_EQ_B1_GAIN_MASK 0xF800 /* DSP1RX_EQ_B1_GAIN - [15:11] */ +#define WM8996_DSP1RX_EQ_B1_GAIN_SHIFT 11 /* DSP1RX_EQ_B1_GAIN - [15:11] */ +#define WM8996_DSP1RX_EQ_B1_GAIN_WIDTH 5 /* DSP1RX_EQ_B1_GAIN - [15:11] */ +#define WM8996_DSP1RX_EQ_B2_GAIN_MASK 0x07C0 /* DSP1RX_EQ_B2_GAIN - [10:6] */ +#define WM8996_DSP1RX_EQ_B2_GAIN_SHIFT 6 /* DSP1RX_EQ_B2_GAIN - [10:6] */ +#define WM8996_DSP1RX_EQ_B2_GAIN_WIDTH 5 /* DSP1RX_EQ_B2_GAIN - [10:6] */ +#define WM8996_DSP1RX_EQ_B3_GAIN_MASK 0x003E /* DSP1RX_EQ_B3_GAIN - [5:1] */ +#define WM8996_DSP1RX_EQ_B3_GAIN_SHIFT 1 /* DSP1RX_EQ_B3_GAIN - [5:1] */ +#define WM8996_DSP1RX_EQ_B3_GAIN_WIDTH 5 /* DSP1RX_EQ_B3_GAIN - [5:1] */ +#define WM8996_DSP1RX_EQ_ENA 0x0001 /* DSP1RX_EQ_ENA */ +#define WM8996_DSP1RX_EQ_ENA_MASK 0x0001 /* DSP1RX_EQ_ENA */ +#define WM8996_DSP1RX_EQ_ENA_SHIFT 0 /* DSP1RX_EQ_ENA */ +#define WM8996_DSP1RX_EQ_ENA_WIDTH 1 /* DSP1RX_EQ_ENA */ + +/* + * R1153 (0x481) - DSP1 RX EQ Gains (2) + */ +#define WM8996_DSP1RX_EQ_B4_GAIN_MASK 0xF800 /* DSP1RX_EQ_B4_GAIN - [15:11] */ +#define WM8996_DSP1RX_EQ_B4_GAIN_SHIFT 11 /* DSP1RX_EQ_B4_GAIN - [15:11] */ +#define WM8996_DSP1RX_EQ_B4_GAIN_WIDTH 5 /* DSP1RX_EQ_B4_GAIN - [15:11] */ +#define WM8996_DSP1RX_EQ_B5_GAIN_MASK 0x07C0 /* DSP1RX_EQ_B5_GAIN - [10:6] */ +#define WM8996_DSP1RX_EQ_B5_GAIN_SHIFT 6 /* DSP1RX_EQ_B5_GAIN - [10:6] */ +#define WM8996_DSP1RX_EQ_B5_GAIN_WIDTH 5 /* DSP1RX_EQ_B5_GAIN - [10:6] */ + +/* + * R1154 (0x482) - DSP1 RX EQ Band 1 A + */ +#define WM8996_DSP1RX_EQ_B1_A_MASK 0xFFFF /* DSP1RX_EQ_B1_A - [15:0] */ +#define WM8996_DSP1RX_EQ_B1_A_SHIFT 0 /* DSP1RX_EQ_B1_A - [15:0] */ +#define WM8996_DSP1RX_EQ_B1_A_WIDTH 16 /* DSP1RX_EQ_B1_A - [15:0] */ + +/* + * R1155 (0x483) - DSP1 RX EQ Band 1 B + */ +#define WM8996_DSP1RX_EQ_B1_B_MASK 0xFFFF /* DSP1RX_EQ_B1_B - [15:0] */ +#define WM8996_DSP1RX_EQ_B1_B_SHIFT 0 /* DSP1RX_EQ_B1_B - [15:0] */ +#define WM8996_DSP1RX_EQ_B1_B_WIDTH 16 /* DSP1RX_EQ_B1_B - [15:0] */ + +/* + * R1156 (0x484) - DSP1 RX EQ Band 1 PG + */ +#define WM8996_DSP1RX_EQ_B1_PG_MASK 0xFFFF /* DSP1RX_EQ_B1_PG - [15:0] */ +#define WM8996_DSP1RX_EQ_B1_PG_SHIFT 0 /* DSP1RX_EQ_B1_PG - [15:0] */ +#define WM8996_DSP1RX_EQ_B1_PG_WIDTH 16 /* DSP1RX_EQ_B1_PG - [15:0] */ + +/* + * R1157 (0x485) - DSP1 RX EQ Band 2 A + */ +#define WM8996_DSP1RX_EQ_B2_A_MASK 0xFFFF /* DSP1RX_EQ_B2_A - [15:0] */ +#define WM8996_DSP1RX_EQ_B2_A_SHIFT 0 /* DSP1RX_EQ_B2_A - [15:0] */ +#define WM8996_DSP1RX_EQ_B2_A_WIDTH 16 /* DSP1RX_EQ_B2_A - [15:0] */ + +/* + * R1158 (0x486) - DSP1 RX EQ Band 2 B + */ +#define WM8996_DSP1RX_EQ_B2_B_MASK 0xFFFF /* DSP1RX_EQ_B2_B - [15:0] */ +#define WM8996_DSP1RX_EQ_B2_B_SHIFT 0 /* DSP1RX_EQ_B2_B - [15:0] */ +#define WM8996_DSP1RX_EQ_B2_B_WIDTH 16 /* DSP1RX_EQ_B2_B - [15:0] */ + +/* + * R1159 (0x487) - DSP1 RX EQ Band 2 C + */ +#define WM8996_DSP1RX_EQ_B2_C_MASK 0xFFFF /* DSP1RX_EQ_B2_C - [15:0] */ +#define WM8996_DSP1RX_EQ_B2_C_SHIFT 0 /* DSP1RX_EQ_B2_C - [15:0] */ +#define WM8996_DSP1RX_EQ_B2_C_WIDTH 16 /* DSP1RX_EQ_B2_C - [15:0] */ + +/* + * R1160 (0x488) - DSP1 RX EQ Band 2 PG + */ +#define WM8996_DSP1RX_EQ_B2_PG_MASK 0xFFFF /* DSP1RX_EQ_B2_PG - [15:0] */ +#define WM8996_DSP1RX_EQ_B2_PG_SHIFT 0 /* DSP1RX_EQ_B2_PG - [15:0] */ +#define WM8996_DSP1RX_EQ_B2_PG_WIDTH 16 /* DSP1RX_EQ_B2_PG - [15:0] */ + +/* + * R1161 (0x489) - DSP1 RX EQ Band 3 A + */ +#define WM8996_DSP1RX_EQ_B3_A_MASK 0xFFFF /* DSP1RX_EQ_B3_A - [15:0] */ +#define WM8996_DSP1RX_EQ_B3_A_SHIFT 0 /* DSP1RX_EQ_B3_A - [15:0] */ +#define WM8996_DSP1RX_EQ_B3_A_WIDTH 16 /* DSP1RX_EQ_B3_A - [15:0] */ + +/* + * R1162 (0x48A) - DSP1 RX EQ Band 3 B + */ +#define WM8996_DSP1RX_EQ_B3_B_MASK 0xFFFF /* DSP1RX_EQ_B3_B - [15:0] */ +#define WM8996_DSP1RX_EQ_B3_B_SHIFT 0 /* DSP1RX_EQ_B3_B - [15:0] */ +#define WM8996_DSP1RX_EQ_B3_B_WIDTH 16 /* DSP1RX_EQ_B3_B - [15:0] */ + +/* + * R1163 (0x48B) - DSP1 RX EQ Band 3 C + */ +#define WM8996_DSP1RX_EQ_B3_C_MASK 0xFFFF /* DSP1RX_EQ_B3_C - [15:0] */ +#define WM8996_DSP1RX_EQ_B3_C_SHIFT 0 /* DSP1RX_EQ_B3_C - [15:0] */ +#define WM8996_DSP1RX_EQ_B3_C_WIDTH 16 /* DSP1RX_EQ_B3_C - [15:0] */ + +/* + * R1164 (0x48C) - DSP1 RX EQ Band 3 PG + */ +#define WM8996_DSP1RX_EQ_B3_PG_MASK 0xFFFF /* DSP1RX_EQ_B3_PG - [15:0] */ +#define WM8996_DSP1RX_EQ_B3_PG_SHIFT 0 /* DSP1RX_EQ_B3_PG - [15:0] */ +#define WM8996_DSP1RX_EQ_B3_PG_WIDTH 16 /* DSP1RX_EQ_B3_PG - [15:0] */ + +/* + * R1165 (0x48D) - DSP1 RX EQ Band 4 A + */ +#define WM8996_DSP1RX_EQ_B4_A_MASK 0xFFFF /* DSP1RX_EQ_B4_A - [15:0] */ +#define WM8996_DSP1RX_EQ_B4_A_SHIFT 0 /* DSP1RX_EQ_B4_A - [15:0] */ +#define WM8996_DSP1RX_EQ_B4_A_WIDTH 16 /* DSP1RX_EQ_B4_A - [15:0] */ + +/* + * R1166 (0x48E) - DSP1 RX EQ Band 4 B + */ +#define WM8996_DSP1RX_EQ_B4_B_MASK 0xFFFF /* DSP1RX_EQ_B4_B - [15:0] */ +#define WM8996_DSP1RX_EQ_B4_B_SHIFT 0 /* DSP1RX_EQ_B4_B - [15:0] */ +#define WM8996_DSP1RX_EQ_B4_B_WIDTH 16 /* DSP1RX_EQ_B4_B - [15:0] */ + +/* + * R1167 (0x48F) - DSP1 RX EQ Band 4 C + */ +#define WM8996_DSP1RX_EQ_B4_C_MASK 0xFFFF /* DSP1RX_EQ_B4_C - [15:0] */ +#define WM8996_DSP1RX_EQ_B4_C_SHIFT 0 /* DSP1RX_EQ_B4_C - [15:0] */ +#define WM8996_DSP1RX_EQ_B4_C_WIDTH 16 /* DSP1RX_EQ_B4_C - [15:0] */ + +/* + * R1168 (0x490) - DSP1 RX EQ Band 4 PG + */ +#define WM8996_DSP1RX_EQ_B4_PG_MASK 0xFFFF /* DSP1RX_EQ_B4_PG - [15:0] */ +#define WM8996_DSP1RX_EQ_B4_PG_SHIFT 0 /* DSP1RX_EQ_B4_PG - [15:0] */ +#define WM8996_DSP1RX_EQ_B4_PG_WIDTH 16 /* DSP1RX_EQ_B4_PG - [15:0] */ + +/* + * R1169 (0x491) - DSP1 RX EQ Band 5 A + */ +#define WM8996_DSP1RX_EQ_B5_A_MASK 0xFFFF /* DSP1RX_EQ_B5_A - [15:0] */ +#define WM8996_DSP1RX_EQ_B5_A_SHIFT 0 /* DSP1RX_EQ_B5_A - [15:0] */ +#define WM8996_DSP1RX_EQ_B5_A_WIDTH 16 /* DSP1RX_EQ_B5_A - [15:0] */ + +/* + * R1170 (0x492) - DSP1 RX EQ Band 5 B + */ +#define WM8996_DSP1RX_EQ_B5_B_MASK 0xFFFF /* DSP1RX_EQ_B5_B - [15:0] */ +#define WM8996_DSP1RX_EQ_B5_B_SHIFT 0 /* DSP1RX_EQ_B5_B - [15:0] */ +#define WM8996_DSP1RX_EQ_B5_B_WIDTH 16 /* DSP1RX_EQ_B5_B - [15:0] */ + +/* + * R1171 (0x493) - DSP1 RX EQ Band 5 PG + */ +#define WM8996_DSP1RX_EQ_B5_PG_MASK 0xFFFF /* DSP1RX_EQ_B5_PG - [15:0] */ +#define WM8996_DSP1RX_EQ_B5_PG_SHIFT 0 /* DSP1RX_EQ_B5_PG - [15:0] */ +#define WM8996_DSP1RX_EQ_B5_PG_WIDTH 16 /* DSP1RX_EQ_B5_PG - [15:0] */ + +/* + * R1280 (0x500) - DSP2 TX Left Volume + */ +#define WM8996_DSP2TX_VU 0x0100 /* DSP2TX_VU */ +#define WM8996_DSP2TX_VU_MASK 0x0100 /* DSP2TX_VU */ +#define WM8996_DSP2TX_VU_SHIFT 8 /* DSP2TX_VU */ +#define WM8996_DSP2TX_VU_WIDTH 1 /* DSP2TX_VU */ +#define WM8996_DSP2TXL_VOL_MASK 0x00FF /* DSP2TXL_VOL - [7:0] */ +#define WM8996_DSP2TXL_VOL_SHIFT 0 /* DSP2TXL_VOL - [7:0] */ +#define WM8996_DSP2TXL_VOL_WIDTH 8 /* DSP2TXL_VOL - [7:0] */ + +/* + * R1281 (0x501) - DSP2 TX Right Volume + */ +#define WM8996_DSP2TX_VU 0x0100 /* DSP2TX_VU */ +#define WM8996_DSP2TX_VU_MASK 0x0100 /* DSP2TX_VU */ +#define WM8996_DSP2TX_VU_SHIFT 8 /* DSP2TX_VU */ +#define WM8996_DSP2TX_VU_WIDTH 1 /* DSP2TX_VU */ +#define WM8996_DSP2TXR_VOL_MASK 0x00FF /* DSP2TXR_VOL - [7:0] */ +#define WM8996_DSP2TXR_VOL_SHIFT 0 /* DSP2TXR_VOL - [7:0] */ +#define WM8996_DSP2TXR_VOL_WIDTH 8 /* DSP2TXR_VOL - [7:0] */ + +/* + * R1282 (0x502) - DSP2 RX Left Volume + */ +#define WM8996_DSP2RX_VU 0x0100 /* DSP2RX_VU */ +#define WM8996_DSP2RX_VU_MASK 0x0100 /* DSP2RX_VU */ +#define WM8996_DSP2RX_VU_SHIFT 8 /* DSP2RX_VU */ +#define WM8996_DSP2RX_VU_WIDTH 1 /* DSP2RX_VU */ +#define WM8996_DSP2RXL_VOL_MASK 0x00FF /* DSP2RXL_VOL - [7:0] */ +#define WM8996_DSP2RXL_VOL_SHIFT 0 /* DSP2RXL_VOL - [7:0] */ +#define WM8996_DSP2RXL_VOL_WIDTH 8 /* DSP2RXL_VOL - [7:0] */ + +/* + * R1283 (0x503) - DSP2 RX Right Volume + */ +#define WM8996_DSP2RX_VU 0x0100 /* DSP2RX_VU */ +#define WM8996_DSP2RX_VU_MASK 0x0100 /* DSP2RX_VU */ +#define WM8996_DSP2RX_VU_SHIFT 8 /* DSP2RX_VU */ +#define WM8996_DSP2RX_VU_WIDTH 1 /* DSP2RX_VU */ +#define WM8996_DSP2RXR_VOL_MASK 0x00FF /* DSP2RXR_VOL - [7:0] */ +#define WM8996_DSP2RXR_VOL_SHIFT 0 /* DSP2RXR_VOL - [7:0] */ +#define WM8996_DSP2RXR_VOL_WIDTH 8 /* DSP2RXR_VOL - [7:0] */ + +/* + * R1296 (0x510) - DSP2 TX Filters + */ +#define WM8996_DSP2TX_NF 0x2000 /* DSP2TX_NF */ +#define WM8996_DSP2TX_NF_MASK 0x2000 /* DSP2TX_NF */ +#define WM8996_DSP2TX_NF_SHIFT 13 /* DSP2TX_NF */ +#define WM8996_DSP2TX_NF_WIDTH 1 /* DSP2TX_NF */ +#define WM8996_DSP2TXL_HPF 0x1000 /* DSP2TXL_HPF */ +#define WM8996_DSP2TXL_HPF_MASK 0x1000 /* DSP2TXL_HPF */ +#define WM8996_DSP2TXL_HPF_SHIFT 12 /* DSP2TXL_HPF */ +#define WM8996_DSP2TXL_HPF_WIDTH 1 /* DSP2TXL_HPF */ +#define WM8996_DSP2TXR_HPF 0x0800 /* DSP2TXR_HPF */ +#define WM8996_DSP2TXR_HPF_MASK 0x0800 /* DSP2TXR_HPF */ +#define WM8996_DSP2TXR_HPF_SHIFT 11 /* DSP2TXR_HPF */ +#define WM8996_DSP2TXR_HPF_WIDTH 1 /* DSP2TXR_HPF */ +#define WM8996_DSP2TX_HPF_MODE_MASK 0x0018 /* DSP2TX_HPF_MODE - [4:3] */ +#define WM8996_DSP2TX_HPF_MODE_SHIFT 3 /* DSP2TX_HPF_MODE - [4:3] */ +#define WM8996_DSP2TX_HPF_MODE_WIDTH 2 /* DSP2TX_HPF_MODE - [4:3] */ +#define WM8996_DSP2TX_HPF_CUT_MASK 0x0007 /* DSP2TX_HPF_CUT - [2:0] */ +#define WM8996_DSP2TX_HPF_CUT_SHIFT 0 /* DSP2TX_HPF_CUT - [2:0] */ +#define WM8996_DSP2TX_HPF_CUT_WIDTH 3 /* DSP2TX_HPF_CUT - [2:0] */ + +/* + * R1312 (0x520) - DSP2 RX Filters (1) + */ +#define WM8996_DSP2RX_MUTE 0x0200 /* DSP2RX_MUTE */ +#define WM8996_DSP2RX_MUTE_MASK 0x0200 /* DSP2RX_MUTE */ +#define WM8996_DSP2RX_MUTE_SHIFT 9 /* DSP2RX_MUTE */ +#define WM8996_DSP2RX_MUTE_WIDTH 1 /* DSP2RX_MUTE */ +#define WM8996_DSP2RX_MONO 0x0080 /* DSP2RX_MONO */ +#define WM8996_DSP2RX_MONO_MASK 0x0080 /* DSP2RX_MONO */ +#define WM8996_DSP2RX_MONO_SHIFT 7 /* DSP2RX_MONO */ +#define WM8996_DSP2RX_MONO_WIDTH 1 /* DSP2RX_MONO */ +#define WM8996_DSP2RX_MUTERATE 0x0020 /* DSP2RX_MUTERATE */ +#define WM8996_DSP2RX_MUTERATE_MASK 0x0020 /* DSP2RX_MUTERATE */ +#define WM8996_DSP2RX_MUTERATE_SHIFT 5 /* DSP2RX_MUTERATE */ +#define WM8996_DSP2RX_MUTERATE_WIDTH 1 /* DSP2RX_MUTERATE */ +#define WM8996_DSP2RX_UNMUTE_RAMP 0x0010 /* DSP2RX_UNMUTE_RAMP */ +#define WM8996_DSP2RX_UNMUTE_RAMP_MASK 0x0010 /* DSP2RX_UNMUTE_RAMP */ +#define WM8996_DSP2RX_UNMUTE_RAMP_SHIFT 4 /* DSP2RX_UNMUTE_RAMP */ +#define WM8996_DSP2RX_UNMUTE_RAMP_WIDTH 1 /* DSP2RX_UNMUTE_RAMP */ + +/* + * R1313 (0x521) - DSP2 RX Filters (2) + */ +#define WM8996_DSP2RX_3D_GAIN_MASK 0x3E00 /* DSP2RX_3D_GAIN - [13:9] */ +#define WM8996_DSP2RX_3D_GAIN_SHIFT 9 /* DSP2RX_3D_GAIN - [13:9] */ +#define WM8996_DSP2RX_3D_GAIN_WIDTH 5 /* DSP2RX_3D_GAIN - [13:9] */ +#define WM8996_DSP2RX_3D_ENA 0x0100 /* DSP2RX_3D_ENA */ +#define WM8996_DSP2RX_3D_ENA_MASK 0x0100 /* DSP2RX_3D_ENA */ +#define WM8996_DSP2RX_3D_ENA_SHIFT 8 /* DSP2RX_3D_ENA */ +#define WM8996_DSP2RX_3D_ENA_WIDTH 1 /* DSP2RX_3D_ENA */ + +/* + * R1344 (0x540) - DSP2 DRC (1) + */ +#define WM8996_DSP2DRC_SIG_DET_RMS_MASK 0xF800 /* DSP2DRC_SIG_DET_RMS - [15:11] */ +#define WM8996_DSP2DRC_SIG_DET_RMS_SHIFT 11 /* DSP2DRC_SIG_DET_RMS - [15:11] */ +#define WM8996_DSP2DRC_SIG_DET_RMS_WIDTH 5 /* DSP2DRC_SIG_DET_RMS - [15:11] */ +#define WM8996_DSP2DRC_SIG_DET_PK_MASK 0x0600 /* DSP2DRC_SIG_DET_PK - [10:9] */ +#define WM8996_DSP2DRC_SIG_DET_PK_SHIFT 9 /* DSP2DRC_SIG_DET_PK - [10:9] */ +#define WM8996_DSP2DRC_SIG_DET_PK_WIDTH 2 /* DSP2DRC_SIG_DET_PK - [10:9] */ +#define WM8996_DSP2DRC_NG_ENA 0x0100 /* DSP2DRC_NG_ENA */ +#define WM8996_DSP2DRC_NG_ENA_MASK 0x0100 /* DSP2DRC_NG_ENA */ +#define WM8996_DSP2DRC_NG_ENA_SHIFT 8 /* DSP2DRC_NG_ENA */ +#define WM8996_DSP2DRC_NG_ENA_WIDTH 1 /* DSP2DRC_NG_ENA */ +#define WM8996_DSP2DRC_SIG_DET_MODE 0x0080 /* DSP2DRC_SIG_DET_MODE */ +#define WM8996_DSP2DRC_SIG_DET_MODE_MASK 0x0080 /* DSP2DRC_SIG_DET_MODE */ +#define WM8996_DSP2DRC_SIG_DET_MODE_SHIFT 7 /* DSP2DRC_SIG_DET_MODE */ +#define WM8996_DSP2DRC_SIG_DET_MODE_WIDTH 1 /* DSP2DRC_SIG_DET_MODE */ +#define WM8996_DSP2DRC_SIG_DET 0x0040 /* DSP2DRC_SIG_DET */ +#define WM8996_DSP2DRC_SIG_DET_MASK 0x0040 /* DSP2DRC_SIG_DET */ +#define WM8996_DSP2DRC_SIG_DET_SHIFT 6 /* DSP2DRC_SIG_DET */ +#define WM8996_DSP2DRC_SIG_DET_WIDTH 1 /* DSP2DRC_SIG_DET */ +#define WM8996_DSP2DRC_KNEE2_OP_ENA 0x0020 /* DSP2DRC_KNEE2_OP_ENA */ +#define WM8996_DSP2DRC_KNEE2_OP_ENA_MASK 0x0020 /* DSP2DRC_KNEE2_OP_ENA */ +#define WM8996_DSP2DRC_KNEE2_OP_ENA_SHIFT 5 /* DSP2DRC_KNEE2_OP_ENA */ +#define WM8996_DSP2DRC_KNEE2_OP_ENA_WIDTH 1 /* DSP2DRC_KNEE2_OP_ENA */ +#define WM8996_DSP2DRC_QR 0x0010 /* DSP2DRC_QR */ +#define WM8996_DSP2DRC_QR_MASK 0x0010 /* DSP2DRC_QR */ +#define WM8996_DSP2DRC_QR_SHIFT 4 /* DSP2DRC_QR */ +#define WM8996_DSP2DRC_QR_WIDTH 1 /* DSP2DRC_QR */ +#define WM8996_DSP2DRC_ANTICLIP 0x0008 /* DSP2DRC_ANTICLIP */ +#define WM8996_DSP2DRC_ANTICLIP_MASK 0x0008 /* DSP2DRC_ANTICLIP */ +#define WM8996_DSP2DRC_ANTICLIP_SHIFT 3 /* DSP2DRC_ANTICLIP */ +#define WM8996_DSP2DRC_ANTICLIP_WIDTH 1 /* DSP2DRC_ANTICLIP */ +#define WM8996_DSP2RX_DRC_ENA 0x0004 /* DSP2RX_DRC_ENA */ +#define WM8996_DSP2RX_DRC_ENA_MASK 0x0004 /* DSP2RX_DRC_ENA */ +#define WM8996_DSP2RX_DRC_ENA_SHIFT 2 /* DSP2RX_DRC_ENA */ +#define WM8996_DSP2RX_DRC_ENA_WIDTH 1 /* DSP2RX_DRC_ENA */ +#define WM8996_DSP2TXL_DRC_ENA 0x0002 /* DSP2TXL_DRC_ENA */ +#define WM8996_DSP2TXL_DRC_ENA_MASK 0x0002 /* DSP2TXL_DRC_ENA */ +#define WM8996_DSP2TXL_DRC_ENA_SHIFT 1 /* DSP2TXL_DRC_ENA */ +#define WM8996_DSP2TXL_DRC_ENA_WIDTH 1 /* DSP2TXL_DRC_ENA */ +#define WM8996_DSP2TXR_DRC_ENA 0x0001 /* DSP2TXR_DRC_ENA */ +#define WM8996_DSP2TXR_DRC_ENA_MASK 0x0001 /* DSP2TXR_DRC_ENA */ +#define WM8996_DSP2TXR_DRC_ENA_SHIFT 0 /* DSP2TXR_DRC_ENA */ +#define WM8996_DSP2TXR_DRC_ENA_WIDTH 1 /* DSP2TXR_DRC_ENA */ + +/* + * R1345 (0x541) - DSP2 DRC (2) + */ +#define WM8996_DSP2DRC_ATK_MASK 0x1E00 /* DSP2DRC_ATK - [12:9] */ +#define WM8996_DSP2DRC_ATK_SHIFT 9 /* DSP2DRC_ATK - [12:9] */ +#define WM8996_DSP2DRC_ATK_WIDTH 4 /* DSP2DRC_ATK - [12:9] */ +#define WM8996_DSP2DRC_DCY_MASK 0x01E0 /* DSP2DRC_DCY - [8:5] */ +#define WM8996_DSP2DRC_DCY_SHIFT 5 /* DSP2DRC_DCY - [8:5] */ +#define WM8996_DSP2DRC_DCY_WIDTH 4 /* DSP2DRC_DCY - [8:5] */ +#define WM8996_DSP2DRC_MINGAIN_MASK 0x001C /* DSP2DRC_MINGAIN - [4:2] */ +#define WM8996_DSP2DRC_MINGAIN_SHIFT 2 /* DSP2DRC_MINGAIN - [4:2] */ +#define WM8996_DSP2DRC_MINGAIN_WIDTH 3 /* DSP2DRC_MINGAIN - [4:2] */ +#define WM8996_DSP2DRC_MAXGAIN_MASK 0x0003 /* DSP2DRC_MAXGAIN - [1:0] */ +#define WM8996_DSP2DRC_MAXGAIN_SHIFT 0 /* DSP2DRC_MAXGAIN - [1:0] */ +#define WM8996_DSP2DRC_MAXGAIN_WIDTH 2 /* DSP2DRC_MAXGAIN - [1:0] */ + +/* + * R1346 (0x542) - DSP2 DRC (3) + */ +#define WM8996_DSP2DRC_NG_MINGAIN_MASK 0xF000 /* DSP2DRC_NG_MINGAIN - [15:12] */ +#define WM8996_DSP2DRC_NG_MINGAIN_SHIFT 12 /* DSP2DRC_NG_MINGAIN - [15:12] */ +#define WM8996_DSP2DRC_NG_MINGAIN_WIDTH 4 /* DSP2DRC_NG_MINGAIN - [15:12] */ +#define WM8996_DSP2DRC_NG_EXP_MASK 0x0C00 /* DSP2DRC_NG_EXP - [11:10] */ +#define WM8996_DSP2DRC_NG_EXP_SHIFT 10 /* DSP2DRC_NG_EXP - [11:10] */ +#define WM8996_DSP2DRC_NG_EXP_WIDTH 2 /* DSP2DRC_NG_EXP - [11:10] */ +#define WM8996_DSP2DRC_QR_THR_MASK 0x0300 /* DSP2DRC_QR_THR - [9:8] */ +#define WM8996_DSP2DRC_QR_THR_SHIFT 8 /* DSP2DRC_QR_THR - [9:8] */ +#define WM8996_DSP2DRC_QR_THR_WIDTH 2 /* DSP2DRC_QR_THR - [9:8] */ +#define WM8996_DSP2DRC_QR_DCY_MASK 0x00C0 /* DSP2DRC_QR_DCY - [7:6] */ +#define WM8996_DSP2DRC_QR_DCY_SHIFT 6 /* DSP2DRC_QR_DCY - [7:6] */ +#define WM8996_DSP2DRC_QR_DCY_WIDTH 2 /* DSP2DRC_QR_DCY - [7:6] */ +#define WM8996_DSP2DRC_HI_COMP_MASK 0x0038 /* DSP2DRC_HI_COMP - [5:3] */ +#define WM8996_DSP2DRC_HI_COMP_SHIFT 3 /* DSP2DRC_HI_COMP - [5:3] */ +#define WM8996_DSP2DRC_HI_COMP_WIDTH 3 /* DSP2DRC_HI_COMP - [5:3] */ +#define WM8996_DSP2DRC_LO_COMP_MASK 0x0007 /* DSP2DRC_LO_COMP - [2:0] */ +#define WM8996_DSP2DRC_LO_COMP_SHIFT 0 /* DSP2DRC_LO_COMP - [2:0] */ +#define WM8996_DSP2DRC_LO_COMP_WIDTH 3 /* DSP2DRC_LO_COMP - [2:0] */ + +/* + * R1347 (0x543) - DSP2 DRC (4) + */ +#define WM8996_DSP2DRC_KNEE_IP_MASK 0x07E0 /* DSP2DRC_KNEE_IP - [10:5] */ +#define WM8996_DSP2DRC_KNEE_IP_SHIFT 5 /* DSP2DRC_KNEE_IP - [10:5] */ +#define WM8996_DSP2DRC_KNEE_IP_WIDTH 6 /* DSP2DRC_KNEE_IP - [10:5] */ +#define WM8996_DSP2DRC_KNEE_OP_MASK 0x001F /* DSP2DRC_KNEE_OP - [4:0] */ +#define WM8996_DSP2DRC_KNEE_OP_SHIFT 0 /* DSP2DRC_KNEE_OP - [4:0] */ +#define WM8996_DSP2DRC_KNEE_OP_WIDTH 5 /* DSP2DRC_KNEE_OP - [4:0] */ + +/* + * R1348 (0x544) - DSP2 DRC (5) + */ +#define WM8996_DSP2DRC_KNEE2_IP_MASK 0x03E0 /* DSP2DRC_KNEE2_IP - [9:5] */ +#define WM8996_DSP2DRC_KNEE2_IP_SHIFT 5 /* DSP2DRC_KNEE2_IP - [9:5] */ +#define WM8996_DSP2DRC_KNEE2_IP_WIDTH 5 /* DSP2DRC_KNEE2_IP - [9:5] */ +#define WM8996_DSP2DRC_KNEE2_OP_MASK 0x001F /* DSP2DRC_KNEE2_OP - [4:0] */ +#define WM8996_DSP2DRC_KNEE2_OP_SHIFT 0 /* DSP2DRC_KNEE2_OP - [4:0] */ +#define WM8996_DSP2DRC_KNEE2_OP_WIDTH 5 /* DSP2DRC_KNEE2_OP - [4:0] */ + +/* + * R1408 (0x580) - DSP2 RX EQ Gains (1) + */ +#define WM8996_DSP2RX_EQ_B1_GAIN_MASK 0xF800 /* DSP2RX_EQ_B1_GAIN - [15:11] */ +#define WM8996_DSP2RX_EQ_B1_GAIN_SHIFT 11 /* DSP2RX_EQ_B1_GAIN - [15:11] */ +#define WM8996_DSP2RX_EQ_B1_GAIN_WIDTH 5 /* DSP2RX_EQ_B1_GAIN - [15:11] */ +#define WM8996_DSP2RX_EQ_B2_GAIN_MASK 0x07C0 /* DSP2RX_EQ_B2_GAIN - [10:6] */ +#define WM8996_DSP2RX_EQ_B2_GAIN_SHIFT 6 /* DSP2RX_EQ_B2_GAIN - [10:6] */ +#define WM8996_DSP2RX_EQ_B2_GAIN_WIDTH 5 /* DSP2RX_EQ_B2_GAIN - [10:6] */ +#define WM8996_DSP2RX_EQ_B3_GAIN_MASK 0x003E /* DSP2RX_EQ_B3_GAIN - [5:1] */ +#define WM8996_DSP2RX_EQ_B3_GAIN_SHIFT 1 /* DSP2RX_EQ_B3_GAIN - [5:1] */ +#define WM8996_DSP2RX_EQ_B3_GAIN_WIDTH 5 /* DSP2RX_EQ_B3_GAIN - [5:1] */ +#define WM8996_DSP2RX_EQ_ENA 0x0001 /* DSP2RX_EQ_ENA */ +#define WM8996_DSP2RX_EQ_ENA_MASK 0x0001 /* DSP2RX_EQ_ENA */ +#define WM8996_DSP2RX_EQ_ENA_SHIFT 0 /* DSP2RX_EQ_ENA */ +#define WM8996_DSP2RX_EQ_ENA_WIDTH 1 /* DSP2RX_EQ_ENA */ + +/* + * R1409 (0x581) - DSP2 RX EQ Gains (2) + */ +#define WM8996_DSP2RX_EQ_B4_GAIN_MASK 0xF800 /* DSP2RX_EQ_B4_GAIN - [15:11] */ +#define WM8996_DSP2RX_EQ_B4_GAIN_SHIFT 11 /* DSP2RX_EQ_B4_GAIN - [15:11] */ +#define WM8996_DSP2RX_EQ_B4_GAIN_WIDTH 5 /* DSP2RX_EQ_B4_GAIN - [15:11] */ +#define WM8996_DSP2RX_EQ_B5_GAIN_MASK 0x07C0 /* DSP2RX_EQ_B5_GAIN - [10:6] */ +#define WM8996_DSP2RX_EQ_B5_GAIN_SHIFT 6 /* DSP2RX_EQ_B5_GAIN - [10:6] */ +#define WM8996_DSP2RX_EQ_B5_GAIN_WIDTH 5 /* DSP2RX_EQ_B5_GAIN - [10:6] */ + +/* + * R1410 (0x582) - DSP2 RX EQ Band 1 A + */ +#define WM8996_DSP2RX_EQ_B1_A_MASK 0xFFFF /* DSP2RX_EQ_B1_A - [15:0] */ +#define WM8996_DSP2RX_EQ_B1_A_SHIFT 0 /* DSP2RX_EQ_B1_A - [15:0] */ +#define WM8996_DSP2RX_EQ_B1_A_WIDTH 16 /* DSP2RX_EQ_B1_A - [15:0] */ + +/* + * R1411 (0x583) - DSP2 RX EQ Band 1 B + */ +#define WM8996_DSP2RX_EQ_B1_B_MASK 0xFFFF /* DSP2RX_EQ_B1_B - [15:0] */ +#define WM8996_DSP2RX_EQ_B1_B_SHIFT 0 /* DSP2RX_EQ_B1_B - [15:0] */ +#define WM8996_DSP2RX_EQ_B1_B_WIDTH 16 /* DSP2RX_EQ_B1_B - [15:0] */ + +/* + * R1412 (0x584) - DSP2 RX EQ Band 1 PG + */ +#define WM8996_DSP2RX_EQ_B1_PG_MASK 0xFFFF /* DSP2RX_EQ_B1_PG - [15:0] */ +#define WM8996_DSP2RX_EQ_B1_PG_SHIFT 0 /* DSP2RX_EQ_B1_PG - [15:0] */ +#define WM8996_DSP2RX_EQ_B1_PG_WIDTH 16 /* DSP2RX_EQ_B1_PG - [15:0] */ + +/* + * R1413 (0x585) - DSP2 RX EQ Band 2 A + */ +#define WM8996_DSP2RX_EQ_B2_A_MASK 0xFFFF /* DSP2RX_EQ_B2_A - [15:0] */ +#define WM8996_DSP2RX_EQ_B2_A_SHIFT 0 /* DSP2RX_EQ_B2_A - [15:0] */ +#define WM8996_DSP2RX_EQ_B2_A_WIDTH 16 /* DSP2RX_EQ_B2_A - [15:0] */ + +/* + * R1414 (0x586) - DSP2 RX EQ Band 2 B + */ +#define WM8996_DSP2RX_EQ_B2_B_MASK 0xFFFF /* DSP2RX_EQ_B2_B - [15:0] */ +#define WM8996_DSP2RX_EQ_B2_B_SHIFT 0 /* DSP2RX_EQ_B2_B - [15:0] */ +#define WM8996_DSP2RX_EQ_B2_B_WIDTH 16 /* DSP2RX_EQ_B2_B - [15:0] */ + +/* + * R1415 (0x587) - DSP2 RX EQ Band 2 C + */ +#define WM8996_DSP2RX_EQ_B2_C_MASK 0xFFFF /* DSP2RX_EQ_B2_C - [15:0] */ +#define WM8996_DSP2RX_EQ_B2_C_SHIFT 0 /* DSP2RX_EQ_B2_C - [15:0] */ +#define WM8996_DSP2RX_EQ_B2_C_WIDTH 16 /* DSP2RX_EQ_B2_C - [15:0] */ + +/* + * R1416 (0x588) - DSP2 RX EQ Band 2 PG + */ +#define WM8996_DSP2RX_EQ_B2_PG_MASK 0xFFFF /* DSP2RX_EQ_B2_PG - [15:0] */ +#define WM8996_DSP2RX_EQ_B2_PG_SHIFT 0 /* DSP2RX_EQ_B2_PG - [15:0] */ +#define WM8996_DSP2RX_EQ_B2_PG_WIDTH 16 /* DSP2RX_EQ_B2_PG - [15:0] */ + +/* + * R1417 (0x589) - DSP2 RX EQ Band 3 A + */ +#define WM8996_DSP2RX_EQ_B3_A_MASK 0xFFFF /* DSP2RX_EQ_B3_A - [15:0] */ +#define WM8996_DSP2RX_EQ_B3_A_SHIFT 0 /* DSP2RX_EQ_B3_A - [15:0] */ +#define WM8996_DSP2RX_EQ_B3_A_WIDTH 16 /* DSP2RX_EQ_B3_A - [15:0] */ + +/* + * R1418 (0x58A) - DSP2 RX EQ Band 3 B + */ +#define WM8996_DSP2RX_EQ_B3_B_MASK 0xFFFF /* DSP2RX_EQ_B3_B - [15:0] */ +#define WM8996_DSP2RX_EQ_B3_B_SHIFT 0 /* DSP2RX_EQ_B3_B - [15:0] */ +#define WM8996_DSP2RX_EQ_B3_B_WIDTH 16 /* DSP2RX_EQ_B3_B - [15:0] */ + +/* + * R1419 (0x58B) - DSP2 RX EQ Band 3 C + */ +#define WM8996_DSP2RX_EQ_B3_C_MASK 0xFFFF /* DSP2RX_EQ_B3_C - [15:0] */ +#define WM8996_DSP2RX_EQ_B3_C_SHIFT 0 /* DSP2RX_EQ_B3_C - [15:0] */ +#define WM8996_DSP2RX_EQ_B3_C_WIDTH 16 /* DSP2RX_EQ_B3_C - [15:0] */ + +/* + * R1420 (0x58C) - DSP2 RX EQ Band 3 PG + */ +#define WM8996_DSP2RX_EQ_B3_PG_MASK 0xFFFF /* DSP2RX_EQ_B3_PG - [15:0] */ +#define WM8996_DSP2RX_EQ_B3_PG_SHIFT 0 /* DSP2RX_EQ_B3_PG - [15:0] */ +#define WM8996_DSP2RX_EQ_B3_PG_WIDTH 16 /* DSP2RX_EQ_B3_PG - [15:0] */ + +/* + * R1421 (0x58D) - DSP2 RX EQ Band 4 A + */ +#define WM8996_DSP2RX_EQ_B4_A_MASK 0xFFFF /* DSP2RX_EQ_B4_A - [15:0] */ +#define WM8996_DSP2RX_EQ_B4_A_SHIFT 0 /* DSP2RX_EQ_B4_A - [15:0] */ +#define WM8996_DSP2RX_EQ_B4_A_WIDTH 16 /* DSP2RX_EQ_B4_A - [15:0] */ + +/* + * R1422 (0x58E) - DSP2 RX EQ Band 4 B + */ +#define WM8996_DSP2RX_EQ_B4_B_MASK 0xFFFF /* DSP2RX_EQ_B4_B - [15:0] */ +#define WM8996_DSP2RX_EQ_B4_B_SHIFT 0 /* DSP2RX_EQ_B4_B - [15:0] */ +#define WM8996_DSP2RX_EQ_B4_B_WIDTH 16 /* DSP2RX_EQ_B4_B - [15:0] */ + +/* + * R1423 (0x58F) - DSP2 RX EQ Band 4 C + */ +#define WM8996_DSP2RX_EQ_B4_C_MASK 0xFFFF /* DSP2RX_EQ_B4_C - [15:0] */ +#define WM8996_DSP2RX_EQ_B4_C_SHIFT 0 /* DSP2RX_EQ_B4_C - [15:0] */ +#define WM8996_DSP2RX_EQ_B4_C_WIDTH 16 /* DSP2RX_EQ_B4_C - [15:0] */ + +/* + * R1424 (0x590) - DSP2 RX EQ Band 4 PG + */ +#define WM8996_DSP2RX_EQ_B4_PG_MASK 0xFFFF /* DSP2RX_EQ_B4_PG - [15:0] */ +#define WM8996_DSP2RX_EQ_B4_PG_SHIFT 0 /* DSP2RX_EQ_B4_PG - [15:0] */ +#define WM8996_DSP2RX_EQ_B4_PG_WIDTH 16 /* DSP2RX_EQ_B4_PG - [15:0] */ + +/* + * R1425 (0x591) - DSP2 RX EQ Band 5 A + */ +#define WM8996_DSP2RX_EQ_B5_A_MASK 0xFFFF /* DSP2RX_EQ_B5_A - [15:0] */ +#define WM8996_DSP2RX_EQ_B5_A_SHIFT 0 /* DSP2RX_EQ_B5_A - [15:0] */ +#define WM8996_DSP2RX_EQ_B5_A_WIDTH 16 /* DSP2RX_EQ_B5_A - [15:0] */ + +/* + * R1426 (0x592) - DSP2 RX EQ Band 5 B + */ +#define WM8996_DSP2RX_EQ_B5_B_MASK 0xFFFF /* DSP2RX_EQ_B5_B - [15:0] */ +#define WM8996_DSP2RX_EQ_B5_B_SHIFT 0 /* DSP2RX_EQ_B5_B - [15:0] */ +#define WM8996_DSP2RX_EQ_B5_B_WIDTH 16 /* DSP2RX_EQ_B5_B - [15:0] */ + +/* + * R1427 (0x593) - DSP2 RX EQ Band 5 PG + */ +#define WM8996_DSP2RX_EQ_B5_PG_MASK 0xFFFF /* DSP2RX_EQ_B5_PG - [15:0] */ +#define WM8996_DSP2RX_EQ_B5_PG_SHIFT 0 /* DSP2RX_EQ_B5_PG - [15:0] */ +#define WM8996_DSP2RX_EQ_B5_PG_WIDTH 16 /* DSP2RX_EQ_B5_PG - [15:0] */ + +/* + * R1536 (0x600) - DAC1 Mixer Volumes + */ +#define WM8996_ADCR_DAC1_VOL_MASK 0x03E0 /* ADCR_DAC1_VOL - [9:5] */ +#define WM8996_ADCR_DAC1_VOL_SHIFT 5 /* ADCR_DAC1_VOL - [9:5] */ +#define WM8996_ADCR_DAC1_VOL_WIDTH 5 /* ADCR_DAC1_VOL - [9:5] */ +#define WM8996_ADCL_DAC1_VOL_MASK 0x001F /* ADCL_DAC1_VOL - [4:0] */ +#define WM8996_ADCL_DAC1_VOL_SHIFT 0 /* ADCL_DAC1_VOL - [4:0] */ +#define WM8996_ADCL_DAC1_VOL_WIDTH 5 /* ADCL_DAC1_VOL - [4:0] */ + +/* + * R1537 (0x601) - DAC1 Left Mixer Routing + */ +#define WM8996_ADCR_TO_DAC1L 0x0020 /* ADCR_TO_DAC1L */ +#define WM8996_ADCR_TO_DAC1L_MASK 0x0020 /* ADCR_TO_DAC1L */ +#define WM8996_ADCR_TO_DAC1L_SHIFT 5 /* ADCR_TO_DAC1L */ +#define WM8996_ADCR_TO_DAC1L_WIDTH 1 /* ADCR_TO_DAC1L */ +#define WM8996_ADCL_TO_DAC1L 0x0010 /* ADCL_TO_DAC1L */ +#define WM8996_ADCL_TO_DAC1L_MASK 0x0010 /* ADCL_TO_DAC1L */ +#define WM8996_ADCL_TO_DAC1L_SHIFT 4 /* ADCL_TO_DAC1L */ +#define WM8996_ADCL_TO_DAC1L_WIDTH 1 /* ADCL_TO_DAC1L */ +#define WM8996_DSP2RXL_TO_DAC1L 0x0002 /* DSP2RXL_TO_DAC1L */ +#define WM8996_DSP2RXL_TO_DAC1L_MASK 0x0002 /* DSP2RXL_TO_DAC1L */ +#define WM8996_DSP2RXL_TO_DAC1L_SHIFT 1 /* DSP2RXL_TO_DAC1L */ +#define WM8996_DSP2RXL_TO_DAC1L_WIDTH 1 /* DSP2RXL_TO_DAC1L */ +#define WM8996_DSP1RXL_TO_DAC1L 0x0001 /* DSP1RXL_TO_DAC1L */ +#define WM8996_DSP1RXL_TO_DAC1L_MASK 0x0001 /* DSP1RXL_TO_DAC1L */ +#define WM8996_DSP1RXL_TO_DAC1L_SHIFT 0 /* DSP1RXL_TO_DAC1L */ +#define WM8996_DSP1RXL_TO_DAC1L_WIDTH 1 /* DSP1RXL_TO_DAC1L */ + +/* + * R1538 (0x602) - DAC1 Right Mixer Routing + */ +#define WM8996_ADCR_TO_DAC1R 0x0020 /* ADCR_TO_DAC1R */ +#define WM8996_ADCR_TO_DAC1R_MASK 0x0020 /* ADCR_TO_DAC1R */ +#define WM8996_ADCR_TO_DAC1R_SHIFT 5 /* ADCR_TO_DAC1R */ +#define WM8996_ADCR_TO_DAC1R_WIDTH 1 /* ADCR_TO_DAC1R */ +#define WM8996_ADCL_TO_DAC1R 0x0010 /* ADCL_TO_DAC1R */ +#define WM8996_ADCL_TO_DAC1R_MASK 0x0010 /* ADCL_TO_DAC1R */ +#define WM8996_ADCL_TO_DAC1R_SHIFT 4 /* ADCL_TO_DAC1R */ +#define WM8996_ADCL_TO_DAC1R_WIDTH 1 /* ADCL_TO_DAC1R */ +#define WM8996_DSP2RXR_TO_DAC1R 0x0002 /* DSP2RXR_TO_DAC1R */ +#define WM8996_DSP2RXR_TO_DAC1R_MASK 0x0002 /* DSP2RXR_TO_DAC1R */ +#define WM8996_DSP2RXR_TO_DAC1R_SHIFT 1 /* DSP2RXR_TO_DAC1R */ +#define WM8996_DSP2RXR_TO_DAC1R_WIDTH 1 /* DSP2RXR_TO_DAC1R */ +#define WM8996_DSP1RXR_TO_DAC1R 0x0001 /* DSP1RXR_TO_DAC1R */ +#define WM8996_DSP1RXR_TO_DAC1R_MASK 0x0001 /* DSP1RXR_TO_DAC1R */ +#define WM8996_DSP1RXR_TO_DAC1R_SHIFT 0 /* DSP1RXR_TO_DAC1R */ +#define WM8996_DSP1RXR_TO_DAC1R_WIDTH 1 /* DSP1RXR_TO_DAC1R */ + +/* + * R1539 (0x603) - DAC2 Mixer Volumes + */ +#define WM8996_ADCR_DAC2_VOL_MASK 0x03E0 /* ADCR_DAC2_VOL - [9:5] */ +#define WM8996_ADCR_DAC2_VOL_SHIFT 5 /* ADCR_DAC2_VOL - [9:5] */ +#define WM8996_ADCR_DAC2_VOL_WIDTH 5 /* ADCR_DAC2_VOL - [9:5] */ +#define WM8996_ADCL_DAC2_VOL_MASK 0x001F /* ADCL_DAC2_VOL - [4:0] */ +#define WM8996_ADCL_DAC2_VOL_SHIFT 0 /* ADCL_DAC2_VOL - [4:0] */ +#define WM8996_ADCL_DAC2_VOL_WIDTH 5 /* ADCL_DAC2_VOL - [4:0] */ + +/* + * R1540 (0x604) - DAC2 Left Mixer Routing + */ +#define WM8996_ADCR_TO_DAC2L 0x0020 /* ADCR_TO_DAC2L */ +#define WM8996_ADCR_TO_DAC2L_MASK 0x0020 /* ADCR_TO_DAC2L */ +#define WM8996_ADCR_TO_DAC2L_SHIFT 5 /* ADCR_TO_DAC2L */ +#define WM8996_ADCR_TO_DAC2L_WIDTH 1 /* ADCR_TO_DAC2L */ +#define WM8996_ADCL_TO_DAC2L 0x0010 /* ADCL_TO_DAC2L */ +#define WM8996_ADCL_TO_DAC2L_MASK 0x0010 /* ADCL_TO_DAC2L */ +#define WM8996_ADCL_TO_DAC2L_SHIFT 4 /* ADCL_TO_DAC2L */ +#define WM8996_ADCL_TO_DAC2L_WIDTH 1 /* ADCL_TO_DAC2L */ +#define WM8996_DSP2RXL_TO_DAC2L 0x0002 /* DSP2RXL_TO_DAC2L */ +#define WM8996_DSP2RXL_TO_DAC2L_MASK 0x0002 /* DSP2RXL_TO_DAC2L */ +#define WM8996_DSP2RXL_TO_DAC2L_SHIFT 1 /* DSP2RXL_TO_DAC2L */ +#define WM8996_DSP2RXL_TO_DAC2L_WIDTH 1 /* DSP2RXL_TO_DAC2L */ +#define WM8996_DSP1RXL_TO_DAC2L 0x0001 /* DSP1RXL_TO_DAC2L */ +#define WM8996_DSP1RXL_TO_DAC2L_MASK 0x0001 /* DSP1RXL_TO_DAC2L */ +#define WM8996_DSP1RXL_TO_DAC2L_SHIFT 0 /* DSP1RXL_TO_DAC2L */ +#define WM8996_DSP1RXL_TO_DAC2L_WIDTH 1 /* DSP1RXL_TO_DAC2L */ + +/* + * R1541 (0x605) - DAC2 Right Mixer Routing + */ +#define WM8996_ADCR_TO_DAC2R 0x0020 /* ADCR_TO_DAC2R */ +#define WM8996_ADCR_TO_DAC2R_MASK 0x0020 /* ADCR_TO_DAC2R */ +#define WM8996_ADCR_TO_DAC2R_SHIFT 5 /* ADCR_TO_DAC2R */ +#define WM8996_ADCR_TO_DAC2R_WIDTH 1 /* ADCR_TO_DAC2R */ +#define WM8996_ADCL_TO_DAC2R 0x0010 /* ADCL_TO_DAC2R */ +#define WM8996_ADCL_TO_DAC2R_MASK 0x0010 /* ADCL_TO_DAC2R */ +#define WM8996_ADCL_TO_DAC2R_SHIFT 4 /* ADCL_TO_DAC2R */ +#define WM8996_ADCL_TO_DAC2R_WIDTH 1 /* ADCL_TO_DAC2R */ +#define WM8996_DSP2RXR_TO_DAC2R 0x0002 /* DSP2RXR_TO_DAC2R */ +#define WM8996_DSP2RXR_TO_DAC2R_MASK 0x0002 /* DSP2RXR_TO_DAC2R */ +#define WM8996_DSP2RXR_TO_DAC2R_SHIFT 1 /* DSP2RXR_TO_DAC2R */ +#define WM8996_DSP2RXR_TO_DAC2R_WIDTH 1 /* DSP2RXR_TO_DAC2R */ +#define WM8996_DSP1RXR_TO_DAC2R 0x0001 /* DSP1RXR_TO_DAC2R */ +#define WM8996_DSP1RXR_TO_DAC2R_MASK 0x0001 /* DSP1RXR_TO_DAC2R */ +#define WM8996_DSP1RXR_TO_DAC2R_SHIFT 0 /* DSP1RXR_TO_DAC2R */ +#define WM8996_DSP1RXR_TO_DAC2R_WIDTH 1 /* DSP1RXR_TO_DAC2R */ + +/* + * R1542 (0x606) - DSP1 TX Left Mixer Routing + */ +#define WM8996_ADC1L_TO_DSP1TXL 0x0002 /* ADC1L_TO_DSP1TXL */ +#define WM8996_ADC1L_TO_DSP1TXL_MASK 0x0002 /* ADC1L_TO_DSP1TXL */ +#define WM8996_ADC1L_TO_DSP1TXL_SHIFT 1 /* ADC1L_TO_DSP1TXL */ +#define WM8996_ADC1L_TO_DSP1TXL_WIDTH 1 /* ADC1L_TO_DSP1TXL */ +#define WM8996_DACL_TO_DSP1TXL 0x0001 /* DACL_TO_DSP1TXL */ +#define WM8996_DACL_TO_DSP1TXL_MASK 0x0001 /* DACL_TO_DSP1TXL */ +#define WM8996_DACL_TO_DSP1TXL_SHIFT 0 /* DACL_TO_DSP1TXL */ +#define WM8996_DACL_TO_DSP1TXL_WIDTH 1 /* DACL_TO_DSP1TXL */ + +/* + * R1543 (0x607) - DSP1 TX Right Mixer Routing + */ +#define WM8996_ADC1R_TO_DSP1TXR 0x0002 /* ADC1R_TO_DSP1TXR */ +#define WM8996_ADC1R_TO_DSP1TXR_MASK 0x0002 /* ADC1R_TO_DSP1TXR */ +#define WM8996_ADC1R_TO_DSP1TXR_SHIFT 1 /* ADC1R_TO_DSP1TXR */ +#define WM8996_ADC1R_TO_DSP1TXR_WIDTH 1 /* ADC1R_TO_DSP1TXR */ +#define WM8996_DACR_TO_DSP1TXR 0x0001 /* DACR_TO_DSP1TXR */ +#define WM8996_DACR_TO_DSP1TXR_MASK 0x0001 /* DACR_TO_DSP1TXR */ +#define WM8996_DACR_TO_DSP1TXR_SHIFT 0 /* DACR_TO_DSP1TXR */ +#define WM8996_DACR_TO_DSP1TXR_WIDTH 1 /* DACR_TO_DSP1TXR */ + +/* + * R1544 (0x608) - DSP2 TX Left Mixer Routing + */ +#define WM8996_ADC2L_TO_DSP2TXL 0x0002 /* ADC2L_TO_DSP2TXL */ +#define WM8996_ADC2L_TO_DSP2TXL_MASK 0x0002 /* ADC2L_TO_DSP2TXL */ +#define WM8996_ADC2L_TO_DSP2TXL_SHIFT 1 /* ADC2L_TO_DSP2TXL */ +#define WM8996_ADC2L_TO_DSP2TXL_WIDTH 1 /* ADC2L_TO_DSP2TXL */ +#define WM8996_DACL_TO_DSP2TXL 0x0001 /* DACL_TO_DSP2TXL */ +#define WM8996_DACL_TO_DSP2TXL_MASK 0x0001 /* DACL_TO_DSP2TXL */ +#define WM8996_DACL_TO_DSP2TXL_SHIFT 0 /* DACL_TO_DSP2TXL */ +#define WM8996_DACL_TO_DSP2TXL_WIDTH 1 /* DACL_TO_DSP2TXL */ + +/* + * R1545 (0x609) - DSP2 TX Right Mixer Routing + */ +#define WM8996_ADC2R_TO_DSP2TXR 0x0002 /* ADC2R_TO_DSP2TXR */ +#define WM8996_ADC2R_TO_DSP2TXR_MASK 0x0002 /* ADC2R_TO_DSP2TXR */ +#define WM8996_ADC2R_TO_DSP2TXR_SHIFT 1 /* ADC2R_TO_DSP2TXR */ +#define WM8996_ADC2R_TO_DSP2TXR_WIDTH 1 /* ADC2R_TO_DSP2TXR */ +#define WM8996_DACR_TO_DSP2TXR 0x0001 /* DACR_TO_DSP2TXR */ +#define WM8996_DACR_TO_DSP2TXR_MASK 0x0001 /* DACR_TO_DSP2TXR */ +#define WM8996_DACR_TO_DSP2TXR_SHIFT 0 /* DACR_TO_DSP2TXR */ +#define WM8996_DACR_TO_DSP2TXR_WIDTH 1 /* DACR_TO_DSP2TXR */ + +/* + * R1546 (0x60A) - DSP TX Mixer Select + */ +#define WM8996_DAC_TO_DSPTX_SRC 0x0001 /* DAC_TO_DSPTX_SRC */ +#define WM8996_DAC_TO_DSPTX_SRC_MASK 0x0001 /* DAC_TO_DSPTX_SRC */ +#define WM8996_DAC_TO_DSPTX_SRC_SHIFT 0 /* DAC_TO_DSPTX_SRC */ +#define WM8996_DAC_TO_DSPTX_SRC_WIDTH 1 /* DAC_TO_DSPTX_SRC */ + +/* + * R1552 (0x610) - DAC Softmute + */ +#define WM8996_DAC_SOFTMUTEMODE 0x0002 /* DAC_SOFTMUTEMODE */ +#define WM8996_DAC_SOFTMUTEMODE_MASK 0x0002 /* DAC_SOFTMUTEMODE */ +#define WM8996_DAC_SOFTMUTEMODE_SHIFT 1 /* DAC_SOFTMUTEMODE */ +#define WM8996_DAC_SOFTMUTEMODE_WIDTH 1 /* DAC_SOFTMUTEMODE */ +#define WM8996_DAC_MUTERATE 0x0001 /* DAC_MUTERATE */ +#define WM8996_DAC_MUTERATE_MASK 0x0001 /* DAC_MUTERATE */ +#define WM8996_DAC_MUTERATE_SHIFT 0 /* DAC_MUTERATE */ +#define WM8996_DAC_MUTERATE_WIDTH 1 /* DAC_MUTERATE */ + +/* + * R1568 (0x620) - Oversampling + */ +#define WM8996_SPK_OSR128 0x0008 /* SPK_OSR128 */ +#define WM8996_SPK_OSR128_MASK 0x0008 /* SPK_OSR128 */ +#define WM8996_SPK_OSR128_SHIFT 3 /* SPK_OSR128 */ +#define WM8996_SPK_OSR128_WIDTH 1 /* SPK_OSR128 */ +#define WM8996_DMIC_OSR64 0x0004 /* DMIC_OSR64 */ +#define WM8996_DMIC_OSR64_MASK 0x0004 /* DMIC_OSR64 */ +#define WM8996_DMIC_OSR64_SHIFT 2 /* DMIC_OSR64 */ +#define WM8996_DMIC_OSR64_WIDTH 1 /* DMIC_OSR64 */ +#define WM8996_ADC_OSR128 0x0002 /* ADC_OSR128 */ +#define WM8996_ADC_OSR128_MASK 0x0002 /* ADC_OSR128 */ +#define WM8996_ADC_OSR128_SHIFT 1 /* ADC_OSR128 */ +#define WM8996_ADC_OSR128_WIDTH 1 /* ADC_OSR128 */ +#define WM8996_DAC_OSR128 0x0001 /* DAC_OSR128 */ +#define WM8996_DAC_OSR128_MASK 0x0001 /* DAC_OSR128 */ +#define WM8996_DAC_OSR128_SHIFT 0 /* DAC_OSR128 */ +#define WM8996_DAC_OSR128_WIDTH 1 /* DAC_OSR128 */ + +/* + * R1569 (0x621) - Sidetone + */ +#define WM8996_ST_LPF 0x1000 /* ST_LPF */ +#define WM8996_ST_LPF_MASK 0x1000 /* ST_LPF */ +#define WM8996_ST_LPF_SHIFT 12 /* ST_LPF */ +#define WM8996_ST_LPF_WIDTH 1 /* ST_LPF */ +#define WM8996_ST_HPF_CUT_MASK 0x0380 /* ST_HPF_CUT - [9:7] */ +#define WM8996_ST_HPF_CUT_SHIFT 7 /* ST_HPF_CUT - [9:7] */ +#define WM8996_ST_HPF_CUT_WIDTH 3 /* ST_HPF_CUT - [9:7] */ +#define WM8996_ST_HPF 0x0040 /* ST_HPF */ +#define WM8996_ST_HPF_MASK 0x0040 /* ST_HPF */ +#define WM8996_ST_HPF_SHIFT 6 /* ST_HPF */ +#define WM8996_ST_HPF_WIDTH 1 /* ST_HPF */ +#define WM8996_STR_SEL 0x0002 /* STR_SEL */ +#define WM8996_STR_SEL_MASK 0x0002 /* STR_SEL */ +#define WM8996_STR_SEL_SHIFT 1 /* STR_SEL */ +#define WM8996_STR_SEL_WIDTH 1 /* STR_SEL */ +#define WM8996_STL_SEL 0x0001 /* STL_SEL */ +#define WM8996_STL_SEL_MASK 0x0001 /* STL_SEL */ +#define WM8996_STL_SEL_SHIFT 0 /* STL_SEL */ +#define WM8996_STL_SEL_WIDTH 1 /* STL_SEL */ + +/* + * R1792 (0x700) - GPIO 1 + */ +#define WM8996_GP1_DIR 0x8000 /* GP1_DIR */ +#define WM8996_GP1_DIR_MASK 0x8000 /* GP1_DIR */ +#define WM8996_GP1_DIR_SHIFT 15 /* GP1_DIR */ +#define WM8996_GP1_DIR_WIDTH 1 /* GP1_DIR */ +#define WM8996_GP1_PU 0x4000 /* GP1_PU */ +#define WM8996_GP1_PU_MASK 0x4000 /* GP1_PU */ +#define WM8996_GP1_PU_SHIFT 14 /* GP1_PU */ +#define WM8996_GP1_PU_WIDTH 1 /* GP1_PU */ +#define WM8996_GP1_PD 0x2000 /* GP1_PD */ +#define WM8996_GP1_PD_MASK 0x2000 /* GP1_PD */ +#define WM8996_GP1_PD_SHIFT 13 /* GP1_PD */ +#define WM8996_GP1_PD_WIDTH 1 /* GP1_PD */ +#define WM8996_GP1_POL 0x0400 /* GP1_POL */ +#define WM8996_GP1_POL_MASK 0x0400 /* GP1_POL */ +#define WM8996_GP1_POL_SHIFT 10 /* GP1_POL */ +#define WM8996_GP1_POL_WIDTH 1 /* GP1_POL */ +#define WM8996_GP1_OP_CFG 0x0200 /* GP1_OP_CFG */ +#define WM8996_GP1_OP_CFG_MASK 0x0200 /* GP1_OP_CFG */ +#define WM8996_GP1_OP_CFG_SHIFT 9 /* GP1_OP_CFG */ +#define WM8996_GP1_OP_CFG_WIDTH 1 /* GP1_OP_CFG */ +#define WM8996_GP1_DB 0x0100 /* GP1_DB */ +#define WM8996_GP1_DB_MASK 0x0100 /* GP1_DB */ +#define WM8996_GP1_DB_SHIFT 8 /* GP1_DB */ +#define WM8996_GP1_DB_WIDTH 1 /* GP1_DB */ +#define WM8996_GP1_LVL 0x0040 /* GP1_LVL */ +#define WM8996_GP1_LVL_MASK 0x0040 /* GP1_LVL */ +#define WM8996_GP1_LVL_SHIFT 6 /* GP1_LVL */ +#define WM8996_GP1_LVL_WIDTH 1 /* GP1_LVL */ +#define WM8996_GP1_FN_MASK 0x000F /* GP1_FN - [3:0] */ +#define WM8996_GP1_FN_SHIFT 0 /* GP1_FN - [3:0] */ +#define WM8996_GP1_FN_WIDTH 4 /* GP1_FN - [3:0] */ + +/* + * R1793 (0x701) - GPIO 2 + */ +#define WM8996_GP2_DIR 0x8000 /* GP2_DIR */ +#define WM8996_GP2_DIR_MASK 0x8000 /* GP2_DIR */ +#define WM8996_GP2_DIR_SHIFT 15 /* GP2_DIR */ +#define WM8996_GP2_DIR_WIDTH 1 /* GP2_DIR */ +#define WM8996_GP2_PU 0x4000 /* GP2_PU */ +#define WM8996_GP2_PU_MASK 0x4000 /* GP2_PU */ +#define WM8996_GP2_PU_SHIFT 14 /* GP2_PU */ +#define WM8996_GP2_PU_WIDTH 1 /* GP2_PU */ +#define WM8996_GP2_PD 0x2000 /* GP2_PD */ +#define WM8996_GP2_PD_MASK 0x2000 /* GP2_PD */ +#define WM8996_GP2_PD_SHIFT 13 /* GP2_PD */ +#define WM8996_GP2_PD_WIDTH 1 /* GP2_PD */ +#define WM8996_GP2_POL 0x0400 /* GP2_POL */ +#define WM8996_GP2_POL_MASK 0x0400 /* GP2_POL */ +#define WM8996_GP2_POL_SHIFT 10 /* GP2_POL */ +#define WM8996_GP2_POL_WIDTH 1 /* GP2_POL */ +#define WM8996_GP2_OP_CFG 0x0200 /* GP2_OP_CFG */ +#define WM8996_GP2_OP_CFG_MASK 0x0200 /* GP2_OP_CFG */ +#define WM8996_GP2_OP_CFG_SHIFT 9 /* GP2_OP_CFG */ +#define WM8996_GP2_OP_CFG_WIDTH 1 /* GP2_OP_CFG */ +#define WM8996_GP2_DB 0x0100 /* GP2_DB */ +#define WM8996_GP2_DB_MASK 0x0100 /* GP2_DB */ +#define WM8996_GP2_DB_SHIFT 8 /* GP2_DB */ +#define WM8996_GP2_DB_WIDTH 1 /* GP2_DB */ +#define WM8996_GP2_LVL 0x0040 /* GP2_LVL */ +#define WM8996_GP2_LVL_MASK 0x0040 /* GP2_LVL */ +#define WM8996_GP2_LVL_SHIFT 6 /* GP2_LVL */ +#define WM8996_GP2_LVL_WIDTH 1 /* GP2_LVL */ +#define WM8996_GP2_FN_MASK 0x000F /* GP2_FN - [3:0] */ +#define WM8996_GP2_FN_SHIFT 0 /* GP2_FN - [3:0] */ +#define WM8996_GP2_FN_WIDTH 4 /* GP2_FN - [3:0] */ + +/* + * R1794 (0x702) - GPIO 3 + */ +#define WM8996_GP3_DIR 0x8000 /* GP3_DIR */ +#define WM8996_GP3_DIR_MASK 0x8000 /* GP3_DIR */ +#define WM8996_GP3_DIR_SHIFT 15 /* GP3_DIR */ +#define WM8996_GP3_DIR_WIDTH 1 /* GP3_DIR */ +#define WM8996_GP3_PU 0x4000 /* GP3_PU */ +#define WM8996_GP3_PU_MASK 0x4000 /* GP3_PU */ +#define WM8996_GP3_PU_SHIFT 14 /* GP3_PU */ +#define WM8996_GP3_PU_WIDTH 1 /* GP3_PU */ +#define WM8996_GP3_PD 0x2000 /* GP3_PD */ +#define WM8996_GP3_PD_MASK 0x2000 /* GP3_PD */ +#define WM8996_GP3_PD_SHIFT 13 /* GP3_PD */ +#define WM8996_GP3_PD_WIDTH 1 /* GP3_PD */ +#define WM8996_GP3_POL 0x0400 /* GP3_POL */ +#define WM8996_GP3_POL_MASK 0x0400 /* GP3_POL */ +#define WM8996_GP3_POL_SHIFT 10 /* GP3_POL */ +#define WM8996_GP3_POL_WIDTH 1 /* GP3_POL */ +#define WM8996_GP3_OP_CFG 0x0200 /* GP3_OP_CFG */ +#define WM8996_GP3_OP_CFG_MASK 0x0200 /* GP3_OP_CFG */ +#define WM8996_GP3_OP_CFG_SHIFT 9 /* GP3_OP_CFG */ +#define WM8996_GP3_OP_CFG_WIDTH 1 /* GP3_OP_CFG */ +#define WM8996_GP3_DB 0x0100 /* GP3_DB */ +#define WM8996_GP3_DB_MASK 0x0100 /* GP3_DB */ +#define WM8996_GP3_DB_SHIFT 8 /* GP3_DB */ +#define WM8996_GP3_DB_WIDTH 1 /* GP3_DB */ +#define WM8996_GP3_LVL 0x0040 /* GP3_LVL */ +#define WM8996_GP3_LVL_MASK 0x0040 /* GP3_LVL */ +#define WM8996_GP3_LVL_SHIFT 6 /* GP3_LVL */ +#define WM8996_GP3_LVL_WIDTH 1 /* GP3_LVL */ +#define WM8996_GP3_FN_MASK 0x000F /* GP3_FN - [3:0] */ +#define WM8996_GP3_FN_SHIFT 0 /* GP3_FN - [3:0] */ +#define WM8996_GP3_FN_WIDTH 4 /* GP3_FN - [3:0] */ + +/* + * R1795 (0x703) - GPIO 4 + */ +#define WM8996_GP4_DIR 0x8000 /* GP4_DIR */ +#define WM8996_GP4_DIR_MASK 0x8000 /* GP4_DIR */ +#define WM8996_GP4_DIR_SHIFT 15 /* GP4_DIR */ +#define WM8996_GP4_DIR_WIDTH 1 /* GP4_DIR */ +#define WM8996_GP4_PU 0x4000 /* GP4_PU */ +#define WM8996_GP4_PU_MASK 0x4000 /* GP4_PU */ +#define WM8996_GP4_PU_SHIFT 14 /* GP4_PU */ +#define WM8996_GP4_PU_WIDTH 1 /* GP4_PU */ +#define WM8996_GP4_PD 0x2000 /* GP4_PD */ +#define WM8996_GP4_PD_MASK 0x2000 /* GP4_PD */ +#define WM8996_GP4_PD_SHIFT 13 /* GP4_PD */ +#define WM8996_GP4_PD_WIDTH 1 /* GP4_PD */ +#define WM8996_GP4_POL 0x0400 /* GP4_POL */ +#define WM8996_GP4_POL_MASK 0x0400 /* GP4_POL */ +#define WM8996_GP4_POL_SHIFT 10 /* GP4_POL */ +#define WM8996_GP4_POL_WIDTH 1 /* GP4_POL */ +#define WM8996_GP4_OP_CFG 0x0200 /* GP4_OP_CFG */ +#define WM8996_GP4_OP_CFG_MASK 0x0200 /* GP4_OP_CFG */ +#define WM8996_GP4_OP_CFG_SHIFT 9 /* GP4_OP_CFG */ +#define WM8996_GP4_OP_CFG_WIDTH 1 /* GP4_OP_CFG */ +#define WM8996_GP4_DB 0x0100 /* GP4_DB */ +#define WM8996_GP4_DB_MASK 0x0100 /* GP4_DB */ +#define WM8996_GP4_DB_SHIFT 8 /* GP4_DB */ +#define WM8996_GP4_DB_WIDTH 1 /* GP4_DB */ +#define WM8996_GP4_LVL 0x0040 /* GP4_LVL */ +#define WM8996_GP4_LVL_MASK 0x0040 /* GP4_LVL */ +#define WM8996_GP4_LVL_SHIFT 6 /* GP4_LVL */ +#define WM8996_GP4_LVL_WIDTH 1 /* GP4_LVL */ +#define WM8996_GP4_FN_MASK 0x000F /* GP4_FN - [3:0] */ +#define WM8996_GP4_FN_SHIFT 0 /* GP4_FN - [3:0] */ +#define WM8996_GP4_FN_WIDTH 4 /* GP4_FN - [3:0] */ + +/* + * R1796 (0x704) - GPIO 5 + */ +#define WM8996_GP5_DIR 0x8000 /* GP5_DIR */ +#define WM8996_GP5_DIR_MASK 0x8000 /* GP5_DIR */ +#define WM8996_GP5_DIR_SHIFT 15 /* GP5_DIR */ +#define WM8996_GP5_DIR_WIDTH 1 /* GP5_DIR */ +#define WM8996_GP5_PU 0x4000 /* GP5_PU */ +#define WM8996_GP5_PU_MASK 0x4000 /* GP5_PU */ +#define WM8996_GP5_PU_SHIFT 14 /* GP5_PU */ +#define WM8996_GP5_PU_WIDTH 1 /* GP5_PU */ +#define WM8996_GP5_PD 0x2000 /* GP5_PD */ +#define WM8996_GP5_PD_MASK 0x2000 /* GP5_PD */ +#define WM8996_GP5_PD_SHIFT 13 /* GP5_PD */ +#define WM8996_GP5_PD_WIDTH 1 /* GP5_PD */ +#define WM8996_GP5_POL 0x0400 /* GP5_POL */ +#define WM8996_GP5_POL_MASK 0x0400 /* GP5_POL */ +#define WM8996_GP5_POL_SHIFT 10 /* GP5_POL */ +#define WM8996_GP5_POL_WIDTH 1 /* GP5_POL */ +#define WM8996_GP5_OP_CFG 0x0200 /* GP5_OP_CFG */ +#define WM8996_GP5_OP_CFG_MASK 0x0200 /* GP5_OP_CFG */ +#define WM8996_GP5_OP_CFG_SHIFT 9 /* GP5_OP_CFG */ +#define WM8996_GP5_OP_CFG_WIDTH 1 /* GP5_OP_CFG */ +#define WM8996_GP5_DB 0x0100 /* GP5_DB */ +#define WM8996_GP5_DB_MASK 0x0100 /* GP5_DB */ +#define WM8996_GP5_DB_SHIFT 8 /* GP5_DB */ +#define WM8996_GP5_DB_WIDTH 1 /* GP5_DB */ +#define WM8996_GP5_LVL 0x0040 /* GP5_LVL */ +#define WM8996_GP5_LVL_MASK 0x0040 /* GP5_LVL */ +#define WM8996_GP5_LVL_SHIFT 6 /* GP5_LVL */ +#define WM8996_GP5_LVL_WIDTH 1 /* GP5_LVL */ +#define WM8996_GP5_FN_MASK 0x000F /* GP5_FN - [3:0] */ +#define WM8996_GP5_FN_SHIFT 0 /* GP5_FN - [3:0] */ +#define WM8996_GP5_FN_WIDTH 4 /* GP5_FN - [3:0] */ + +/* + * R1824 (0x720) - Pull Control (1) + */ +#define WM8996_DMICDAT2_PD 0x1000 /* DMICDAT2_PD */ +#define WM8996_DMICDAT2_PD_MASK 0x1000 /* DMICDAT2_PD */ +#define WM8996_DMICDAT2_PD_SHIFT 12 /* DMICDAT2_PD */ +#define WM8996_DMICDAT2_PD_WIDTH 1 /* DMICDAT2_PD */ +#define WM8996_DMICDAT1_PD 0x0400 /* DMICDAT1_PD */ +#define WM8996_DMICDAT1_PD_MASK 0x0400 /* DMICDAT1_PD */ +#define WM8996_DMICDAT1_PD_SHIFT 10 /* DMICDAT1_PD */ +#define WM8996_DMICDAT1_PD_WIDTH 1 /* DMICDAT1_PD */ +#define WM8996_MCLK2_PU 0x0200 /* MCLK2_PU */ +#define WM8996_MCLK2_PU_MASK 0x0200 /* MCLK2_PU */ +#define WM8996_MCLK2_PU_SHIFT 9 /* MCLK2_PU */ +#define WM8996_MCLK2_PU_WIDTH 1 /* MCLK2_PU */ +#define WM8996_MCLK2_PD 0x0100 /* MCLK2_PD */ +#define WM8996_MCLK2_PD_MASK 0x0100 /* MCLK2_PD */ +#define WM8996_MCLK2_PD_SHIFT 8 /* MCLK2_PD */ +#define WM8996_MCLK2_PD_WIDTH 1 /* MCLK2_PD */ +#define WM8996_MCLK1_PU 0x0080 /* MCLK1_PU */ +#define WM8996_MCLK1_PU_MASK 0x0080 /* MCLK1_PU */ +#define WM8996_MCLK1_PU_SHIFT 7 /* MCLK1_PU */ +#define WM8996_MCLK1_PU_WIDTH 1 /* MCLK1_PU */ +#define WM8996_MCLK1_PD 0x0040 /* MCLK1_PD */ +#define WM8996_MCLK1_PD_MASK 0x0040 /* MCLK1_PD */ +#define WM8996_MCLK1_PD_SHIFT 6 /* MCLK1_PD */ +#define WM8996_MCLK1_PD_WIDTH 1 /* MCLK1_PD */ +#define WM8996_DACDAT1_PU 0x0020 /* DACDAT1_PU */ +#define WM8996_DACDAT1_PU_MASK 0x0020 /* DACDAT1_PU */ +#define WM8996_DACDAT1_PU_SHIFT 5 /* DACDAT1_PU */ +#define WM8996_DACDAT1_PU_WIDTH 1 /* DACDAT1_PU */ +#define WM8996_DACDAT1_PD 0x0010 /* DACDAT1_PD */ +#define WM8996_DACDAT1_PD_MASK 0x0010 /* DACDAT1_PD */ +#define WM8996_DACDAT1_PD_SHIFT 4 /* DACDAT1_PD */ +#define WM8996_DACDAT1_PD_WIDTH 1 /* DACDAT1_PD */ +#define WM8996_DACLRCLK1_PU 0x0008 /* DACLRCLK1_PU */ +#define WM8996_DACLRCLK1_PU_MASK 0x0008 /* DACLRCLK1_PU */ +#define WM8996_DACLRCLK1_PU_SHIFT 3 /* DACLRCLK1_PU */ +#define WM8996_DACLRCLK1_PU_WIDTH 1 /* DACLRCLK1_PU */ +#define WM8996_DACLRCLK1_PD 0x0004 /* DACLRCLK1_PD */ +#define WM8996_DACLRCLK1_PD_MASK 0x0004 /* DACLRCLK1_PD */ +#define WM8996_DACLRCLK1_PD_SHIFT 2 /* DACLRCLK1_PD */ +#define WM8996_DACLRCLK1_PD_WIDTH 1 /* DACLRCLK1_PD */ +#define WM8996_BCLK1_PU 0x0002 /* BCLK1_PU */ +#define WM8996_BCLK1_PU_MASK 0x0002 /* BCLK1_PU */ +#define WM8996_BCLK1_PU_SHIFT 1 /* BCLK1_PU */ +#define WM8996_BCLK1_PU_WIDTH 1 /* BCLK1_PU */ +#define WM8996_BCLK1_PD 0x0001 /* BCLK1_PD */ +#define WM8996_BCLK1_PD_MASK 0x0001 /* BCLK1_PD */ +#define WM8996_BCLK1_PD_SHIFT 0 /* BCLK1_PD */ +#define WM8996_BCLK1_PD_WIDTH 1 /* BCLK1_PD */ + +/* + * R1825 (0x721) - Pull Control (2) + */ +#define WM8996_LDO1ENA_PD 0x0100 /* LDO1ENA_PD */ +#define WM8996_LDO1ENA_PD_MASK 0x0100 /* LDO1ENA_PD */ +#define WM8996_LDO1ENA_PD_SHIFT 8 /* LDO1ENA_PD */ +#define WM8996_LDO1ENA_PD_WIDTH 1 /* LDO1ENA_PD */ +#define WM8996_ADDR_PD 0x0040 /* ADDR_PD */ +#define WM8996_ADDR_PD_MASK 0x0040 /* ADDR_PD */ +#define WM8996_ADDR_PD_SHIFT 6 /* ADDR_PD */ +#define WM8996_ADDR_PD_WIDTH 1 /* ADDR_PD */ +#define WM8996_DACDAT2_PU 0x0020 /* DACDAT2_PU */ +#define WM8996_DACDAT2_PU_MASK 0x0020 /* DACDAT2_PU */ +#define WM8996_DACDAT2_PU_SHIFT 5 /* DACDAT2_PU */ +#define WM8996_DACDAT2_PU_WIDTH 1 /* DACDAT2_PU */ +#define WM8996_DACDAT2_PD 0x0010 /* DACDAT2_PD */ +#define WM8996_DACDAT2_PD_MASK 0x0010 /* DACDAT2_PD */ +#define WM8996_DACDAT2_PD_SHIFT 4 /* DACDAT2_PD */ +#define WM8996_DACDAT2_PD_WIDTH 1 /* DACDAT2_PD */ +#define WM8996_DACLRCLK2_PU 0x0008 /* DACLRCLK2_PU */ +#define WM8996_DACLRCLK2_PU_MASK 0x0008 /* DACLRCLK2_PU */ +#define WM8996_DACLRCLK2_PU_SHIFT 3 /* DACLRCLK2_PU */ +#define WM8996_DACLRCLK2_PU_WIDTH 1 /* DACLRCLK2_PU */ +#define WM8996_DACLRCLK2_PD 0x0004 /* DACLRCLK2_PD */ +#define WM8996_DACLRCLK2_PD_MASK 0x0004 /* DACLRCLK2_PD */ +#define WM8996_DACLRCLK2_PD_SHIFT 2 /* DACLRCLK2_PD */ +#define WM8996_DACLRCLK2_PD_WIDTH 1 /* DACLRCLK2_PD */ +#define WM8996_BCLK2_PU 0x0002 /* BCLK2_PU */ +#define WM8996_BCLK2_PU_MASK 0x0002 /* BCLK2_PU */ +#define WM8996_BCLK2_PU_SHIFT 1 /* BCLK2_PU */ +#define WM8996_BCLK2_PU_WIDTH 1 /* BCLK2_PU */ +#define WM8996_BCLK2_PD 0x0001 /* BCLK2_PD */ +#define WM8996_BCLK2_PD_MASK 0x0001 /* BCLK2_PD */ +#define WM8996_BCLK2_PD_SHIFT 0 /* BCLK2_PD */ +#define WM8996_BCLK2_PD_WIDTH 1 /* BCLK2_PD */ + +/* + * R1840 (0x730) - Interrupt Status 1 + */ +#define WM8996_GP5_EINT 0x0010 /* GP5_EINT */ +#define WM8996_GP5_EINT_MASK 0x0010 /* GP5_EINT */ +#define WM8996_GP5_EINT_SHIFT 4 /* GP5_EINT */ +#define WM8996_GP5_EINT_WIDTH 1 /* GP5_EINT */ +#define WM8996_GP4_EINT 0x0008 /* GP4_EINT */ +#define WM8996_GP4_EINT_MASK 0x0008 /* GP4_EINT */ +#define WM8996_GP4_EINT_SHIFT 3 /* GP4_EINT */ +#define WM8996_GP4_EINT_WIDTH 1 /* GP4_EINT */ +#define WM8996_GP3_EINT 0x0004 /* GP3_EINT */ +#define WM8996_GP3_EINT_MASK 0x0004 /* GP3_EINT */ +#define WM8996_GP3_EINT_SHIFT 2 /* GP3_EINT */ +#define WM8996_GP3_EINT_WIDTH 1 /* GP3_EINT */ +#define WM8996_GP2_EINT 0x0002 /* GP2_EINT */ +#define WM8996_GP2_EINT_MASK 0x0002 /* GP2_EINT */ +#define WM8996_GP2_EINT_SHIFT 1 /* GP2_EINT */ +#define WM8996_GP2_EINT_WIDTH 1 /* GP2_EINT */ +#define WM8996_GP1_EINT 0x0001 /* GP1_EINT */ +#define WM8996_GP1_EINT_MASK 0x0001 /* GP1_EINT */ +#define WM8996_GP1_EINT_SHIFT 0 /* GP1_EINT */ +#define WM8996_GP1_EINT_WIDTH 1 /* GP1_EINT */ + +/* + * R1841 (0x731) - Interrupt Status 2 + */ +#define WM8996_DCS_DONE_23_EINT 0x1000 /* DCS_DONE_23_EINT */ +#define WM8996_DCS_DONE_23_EINT_MASK 0x1000 /* DCS_DONE_23_EINT */ +#define WM8996_DCS_DONE_23_EINT_SHIFT 12 /* DCS_DONE_23_EINT */ +#define WM8996_DCS_DONE_23_EINT_WIDTH 1 /* DCS_DONE_23_EINT */ +#define WM8996_DCS_DONE_01_EINT 0x0800 /* DCS_DONE_01_EINT */ +#define WM8996_DCS_DONE_01_EINT_MASK 0x0800 /* DCS_DONE_01_EINT */ +#define WM8996_DCS_DONE_01_EINT_SHIFT 11 /* DCS_DONE_01_EINT */ +#define WM8996_DCS_DONE_01_EINT_WIDTH 1 /* DCS_DONE_01_EINT */ +#define WM8996_WSEQ_DONE_EINT 0x0400 /* WSEQ_DONE_EINT */ +#define WM8996_WSEQ_DONE_EINT_MASK 0x0400 /* WSEQ_DONE_EINT */ +#define WM8996_WSEQ_DONE_EINT_SHIFT 10 /* WSEQ_DONE_EINT */ +#define WM8996_WSEQ_DONE_EINT_WIDTH 1 /* WSEQ_DONE_EINT */ +#define WM8996_FIFOS_ERR_EINT 0x0200 /* FIFOS_ERR_EINT */ +#define WM8996_FIFOS_ERR_EINT_MASK 0x0200 /* FIFOS_ERR_EINT */ +#define WM8996_FIFOS_ERR_EINT_SHIFT 9 /* FIFOS_ERR_EINT */ +#define WM8996_FIFOS_ERR_EINT_WIDTH 1 /* FIFOS_ERR_EINT */ +#define WM8996_DSP2DRC_SIG_DET_EINT 0x0080 /* DSP2DRC_SIG_DET_EINT */ +#define WM8996_DSP2DRC_SIG_DET_EINT_MASK 0x0080 /* DSP2DRC_SIG_DET_EINT */ +#define WM8996_DSP2DRC_SIG_DET_EINT_SHIFT 7 /* DSP2DRC_SIG_DET_EINT */ +#define WM8996_DSP2DRC_SIG_DET_EINT_WIDTH 1 /* DSP2DRC_SIG_DET_EINT */ +#define WM8996_DSP1DRC_SIG_DET_EINT 0x0040 /* DSP1DRC_SIG_DET_EINT */ +#define WM8996_DSP1DRC_SIG_DET_EINT_MASK 0x0040 /* DSP1DRC_SIG_DET_EINT */ +#define WM8996_DSP1DRC_SIG_DET_EINT_SHIFT 6 /* DSP1DRC_SIG_DET_EINT */ +#define WM8996_DSP1DRC_SIG_DET_EINT_WIDTH 1 /* DSP1DRC_SIG_DET_EINT */ +#define WM8996_FLL_SW_CLK_DONE_EINT 0x0008 /* FLL_SW_CLK_DONE_EINT */ +#define WM8996_FLL_SW_CLK_DONE_EINT_MASK 0x0008 /* FLL_SW_CLK_DONE_EINT */ +#define WM8996_FLL_SW_CLK_DONE_EINT_SHIFT 3 /* FLL_SW_CLK_DONE_EINT */ +#define WM8996_FLL_SW_CLK_DONE_EINT_WIDTH 1 /* FLL_SW_CLK_DONE_EINT */ +#define WM8996_FLL_LOCK_EINT 0x0004 /* FLL_LOCK_EINT */ +#define WM8996_FLL_LOCK_EINT_MASK 0x0004 /* FLL_LOCK_EINT */ +#define WM8996_FLL_LOCK_EINT_SHIFT 2 /* FLL_LOCK_EINT */ +#define WM8996_FLL_LOCK_EINT_WIDTH 1 /* FLL_LOCK_EINT */ +#define WM8996_HP_DONE_EINT 0x0002 /* HP_DONE_EINT */ +#define WM8996_HP_DONE_EINT_MASK 0x0002 /* HP_DONE_EINT */ +#define WM8996_HP_DONE_EINT_SHIFT 1 /* HP_DONE_EINT */ +#define WM8996_HP_DONE_EINT_WIDTH 1 /* HP_DONE_EINT */ +#define WM8996_MICD_EINT 0x0001 /* MICD_EINT */ +#define WM8996_MICD_EINT_MASK 0x0001 /* MICD_EINT */ +#define WM8996_MICD_EINT_SHIFT 0 /* MICD_EINT */ +#define WM8996_MICD_EINT_WIDTH 1 /* MICD_EINT */ + +/* + * R1842 (0x732) - Interrupt Raw Status 2 + */ +#define WM8996_DCS_DONE_23_STS 0x1000 /* DCS_DONE_23_STS */ +#define WM8996_DCS_DONE_23_STS_MASK 0x1000 /* DCS_DONE_23_STS */ +#define WM8996_DCS_DONE_23_STS_SHIFT 12 /* DCS_DONE_23_STS */ +#define WM8996_DCS_DONE_23_STS_WIDTH 1 /* DCS_DONE_23_STS */ +#define WM8996_DCS_DONE_01_STS 0x0800 /* DCS_DONE_01_STS */ +#define WM8996_DCS_DONE_01_STS_MASK 0x0800 /* DCS_DONE_01_STS */ +#define WM8996_DCS_DONE_01_STS_SHIFT 11 /* DCS_DONE_01_STS */ +#define WM8996_DCS_DONE_01_STS_WIDTH 1 /* DCS_DONE_01_STS */ +#define WM8996_WSEQ_DONE_STS 0x0400 /* WSEQ_DONE_STS */ +#define WM8996_WSEQ_DONE_STS_MASK 0x0400 /* WSEQ_DONE_STS */ +#define WM8996_WSEQ_DONE_STS_SHIFT 10 /* WSEQ_DONE_STS */ +#define WM8996_WSEQ_DONE_STS_WIDTH 1 /* WSEQ_DONE_STS */ +#define WM8996_FIFOS_ERR_STS 0x0200 /* FIFOS_ERR_STS */ +#define WM8996_FIFOS_ERR_STS_MASK 0x0200 /* FIFOS_ERR_STS */ +#define WM8996_FIFOS_ERR_STS_SHIFT 9 /* FIFOS_ERR_STS */ +#define WM8996_FIFOS_ERR_STS_WIDTH 1 /* FIFOS_ERR_STS */ +#define WM8996_DSP2DRC_SIG_DET_STS 0x0080 /* DSP2DRC_SIG_DET_STS */ +#define WM8996_DSP2DRC_SIG_DET_STS_MASK 0x0080 /* DSP2DRC_SIG_DET_STS */ +#define WM8996_DSP2DRC_SIG_DET_STS_SHIFT 7 /* DSP2DRC_SIG_DET_STS */ +#define WM8996_DSP2DRC_SIG_DET_STS_WIDTH 1 /* DSP2DRC_SIG_DET_STS */ +#define WM8996_DSP1DRC_SIG_DET_STS 0x0040 /* DSP1DRC_SIG_DET_STS */ +#define WM8996_DSP1DRC_SIG_DET_STS_MASK 0x0040 /* DSP1DRC_SIG_DET_STS */ +#define WM8996_DSP1DRC_SIG_DET_STS_SHIFT 6 /* DSP1DRC_SIG_DET_STS */ +#define WM8996_DSP1DRC_SIG_DET_STS_WIDTH 1 /* DSP1DRC_SIG_DET_STS */ +#define WM8996_FLL_LOCK_STS 0x0004 /* FLL_LOCK_STS */ +#define WM8996_FLL_LOCK_STS_MASK 0x0004 /* FLL_LOCK_STS */ +#define WM8996_FLL_LOCK_STS_SHIFT 2 /* FLL_LOCK_STS */ +#define WM8996_FLL_LOCK_STS_WIDTH 1 /* FLL_LOCK_STS */ + +/* + * R1848 (0x738) - Interrupt Status 1 Mask + */ +#define WM8996_IM_GP5_EINT 0x0010 /* IM_GP5_EINT */ +#define WM8996_IM_GP5_EINT_MASK 0x0010 /* IM_GP5_EINT */ +#define WM8996_IM_GP5_EINT_SHIFT 4 /* IM_GP5_EINT */ +#define WM8996_IM_GP5_EINT_WIDTH 1 /* IM_GP5_EINT */ +#define WM8996_IM_GP4_EINT 0x0008 /* IM_GP4_EINT */ +#define WM8996_IM_GP4_EINT_MASK 0x0008 /* IM_GP4_EINT */ +#define WM8996_IM_GP4_EINT_SHIFT 3 /* IM_GP4_EINT */ +#define WM8996_IM_GP4_EINT_WIDTH 1 /* IM_GP4_EINT */ +#define WM8996_IM_GP3_EINT 0x0004 /* IM_GP3_EINT */ +#define WM8996_IM_GP3_EINT_MASK 0x0004 /* IM_GP3_EINT */ +#define WM8996_IM_GP3_EINT_SHIFT 2 /* IM_GP3_EINT */ +#define WM8996_IM_GP3_EINT_WIDTH 1 /* IM_GP3_EINT */ +#define WM8996_IM_GP2_EINT 0x0002 /* IM_GP2_EINT */ +#define WM8996_IM_GP2_EINT_MASK 0x0002 /* IM_GP2_EINT */ +#define WM8996_IM_GP2_EINT_SHIFT 1 /* IM_GP2_EINT */ +#define WM8996_IM_GP2_EINT_WIDTH 1 /* IM_GP2_EINT */ +#define WM8996_IM_GP1_EINT 0x0001 /* IM_GP1_EINT */ +#define WM8996_IM_GP1_EINT_MASK 0x0001 /* IM_GP1_EINT */ +#define WM8996_IM_GP1_EINT_SHIFT 0 /* IM_GP1_EINT */ +#define WM8996_IM_GP1_EINT_WIDTH 1 /* IM_GP1_EINT */ + +/* + * R1849 (0x739) - Interrupt Status 2 Mask + */ +#define WM8996_IM_DCS_DONE_23_EINT 0x1000 /* IM_DCS_DONE_23_EINT */ +#define WM8996_IM_DCS_DONE_23_EINT_MASK 0x1000 /* IM_DCS_DONE_23_EINT */ +#define WM8996_IM_DCS_DONE_23_EINT_SHIFT 12 /* IM_DCS_DONE_23_EINT */ +#define WM8996_IM_DCS_DONE_23_EINT_WIDTH 1 /* IM_DCS_DONE_23_EINT */ +#define WM8996_IM_DCS_DONE_01_EINT 0x0800 /* IM_DCS_DONE_01_EINT */ +#define WM8996_IM_DCS_DONE_01_EINT_MASK 0x0800 /* IM_DCS_DONE_01_EINT */ +#define WM8996_IM_DCS_DONE_01_EINT_SHIFT 11 /* IM_DCS_DONE_01_EINT */ +#define WM8996_IM_DCS_DONE_01_EINT_WIDTH 1 /* IM_DCS_DONE_01_EINT */ +#define WM8996_IM_WSEQ_DONE_EINT 0x0400 /* IM_WSEQ_DONE_EINT */ +#define WM8996_IM_WSEQ_DONE_EINT_MASK 0x0400 /* IM_WSEQ_DONE_EINT */ +#define WM8996_IM_WSEQ_DONE_EINT_SHIFT 10 /* IM_WSEQ_DONE_EINT */ +#define WM8996_IM_WSEQ_DONE_EINT_WIDTH 1 /* IM_WSEQ_DONE_EINT */ +#define WM8996_IM_FIFOS_ERR_EINT 0x0200 /* IM_FIFOS_ERR_EINT */ +#define WM8996_IM_FIFOS_ERR_EINT_MASK 0x0200 /* IM_FIFOS_ERR_EINT */ +#define WM8996_IM_FIFOS_ERR_EINT_SHIFT 9 /* IM_FIFOS_ERR_EINT */ +#define WM8996_IM_FIFOS_ERR_EINT_WIDTH 1 /* IM_FIFOS_ERR_EINT */ +#define WM8996_IM_DSP2DRC_SIG_DET_EINT 0x0080 /* IM_DSP2DRC_SIG_DET_EINT */ +#define WM8996_IM_DSP2DRC_SIG_DET_EINT_MASK 0x0080 /* IM_DSP2DRC_SIG_DET_EINT */ +#define WM8996_IM_DSP2DRC_SIG_DET_EINT_SHIFT 7 /* IM_DSP2DRC_SIG_DET_EINT */ +#define WM8996_IM_DSP2DRC_SIG_DET_EINT_WIDTH 1 /* IM_DSP2DRC_SIG_DET_EINT */ +#define WM8996_IM_DSP1DRC_SIG_DET_EINT 0x0040 /* IM_DSP1DRC_SIG_DET_EINT */ +#define WM8996_IM_DSP1DRC_SIG_DET_EINT_MASK 0x0040 /* IM_DSP1DRC_SIG_DET_EINT */ +#define WM8996_IM_DSP1DRC_SIG_DET_EINT_SHIFT 6 /* IM_DSP1DRC_SIG_DET_EINT */ +#define WM8996_IM_DSP1DRC_SIG_DET_EINT_WIDTH 1 /* IM_DSP1DRC_SIG_DET_EINT */ +#define WM8996_IM_FLL_SW_CLK_DONE_EINT 0x0008 /* IM_FLL_SW_CLK_DONE_EINT */ +#define WM8996_IM_FLL_SW_CLK_DONE_EINT_MASK 0x0008 /* IM_FLL_SW_CLK_DONE_EINT */ +#define WM8996_IM_FLL_SW_CLK_DONE_EINT_SHIFT 3 /* IM_FLL_SW_CLK_DONE_EINT */ +#define WM8996_IM_FLL_SW_CLK_DONE_EINT_WIDTH 1 /* IM_FLL_SW_CLK_DONE_EINT */ +#define WM8996_IM_FLL_LOCK_EINT 0x0004 /* IM_FLL_LOCK_EINT */ +#define WM8996_IM_FLL_LOCK_EINT_MASK 0x0004 /* IM_FLL_LOCK_EINT */ +#define WM8996_IM_FLL_LOCK_EINT_SHIFT 2 /* IM_FLL_LOCK_EINT */ +#define WM8996_IM_FLL_LOCK_EINT_WIDTH 1 /* IM_FLL_LOCK_EINT */ +#define WM8996_IM_HP_DONE_EINT 0x0002 /* IM_HP_DONE_EINT */ +#define WM8996_IM_HP_DONE_EINT_MASK 0x0002 /* IM_HP_DONE_EINT */ +#define WM8996_IM_HP_DONE_EINT_SHIFT 1 /* IM_HP_DONE_EINT */ +#define WM8996_IM_HP_DONE_EINT_WIDTH 1 /* IM_HP_DONE_EINT */ +#define WM8996_IM_MICD_EINT 0x0001 /* IM_MICD_EINT */ +#define WM8996_IM_MICD_EINT_MASK 0x0001 /* IM_MICD_EINT */ +#define WM8996_IM_MICD_EINT_SHIFT 0 /* IM_MICD_EINT */ +#define WM8996_IM_MICD_EINT_WIDTH 1 /* IM_MICD_EINT */ + +/* + * R1856 (0x740) - Interrupt Control + */ +#define WM8996_IM_IRQ 0x0001 /* IM_IRQ */ +#define WM8996_IM_IRQ_MASK 0x0001 /* IM_IRQ */ +#define WM8996_IM_IRQ_SHIFT 0 /* IM_IRQ */ +#define WM8996_IM_IRQ_WIDTH 1 /* IM_IRQ */ + +/* + * R2048 (0x800) - Left PDM Speaker + */ +#define WM8996_SPKL_ENA 0x0010 /* SPKL_ENA */ +#define WM8996_SPKL_ENA_MASK 0x0010 /* SPKL_ENA */ +#define WM8996_SPKL_ENA_SHIFT 4 /* SPKL_ENA */ +#define WM8996_SPKL_ENA_WIDTH 1 /* SPKL_ENA */ +#define WM8996_SPKL_MUTE 0x0008 /* SPKL_MUTE */ +#define WM8996_SPKL_MUTE_MASK 0x0008 /* SPKL_MUTE */ +#define WM8996_SPKL_MUTE_SHIFT 3 /* SPKL_MUTE */ +#define WM8996_SPKL_MUTE_WIDTH 1 /* SPKL_MUTE */ +#define WM8996_SPKL_MUTE_ZC 0x0004 /* SPKL_MUTE_ZC */ +#define WM8996_SPKL_MUTE_ZC_MASK 0x0004 /* SPKL_MUTE_ZC */ +#define WM8996_SPKL_MUTE_ZC_SHIFT 2 /* SPKL_MUTE_ZC */ +#define WM8996_SPKL_MUTE_ZC_WIDTH 1 /* SPKL_MUTE_ZC */ +#define WM8996_SPKL_SRC_MASK 0x0003 /* SPKL_SRC - [1:0] */ +#define WM8996_SPKL_SRC_SHIFT 0 /* SPKL_SRC - [1:0] */ +#define WM8996_SPKL_SRC_WIDTH 2 /* SPKL_SRC - [1:0] */ + +/* + * R2049 (0x801) - Right PDM Speaker + */ +#define WM8996_SPKR_ENA 0x0010 /* SPKR_ENA */ +#define WM8996_SPKR_ENA_MASK 0x0010 /* SPKR_ENA */ +#define WM8996_SPKR_ENA_SHIFT 4 /* SPKR_ENA */ +#define WM8996_SPKR_ENA_WIDTH 1 /* SPKR_ENA */ +#define WM8996_SPKR_MUTE 0x0008 /* SPKR_MUTE */ +#define WM8996_SPKR_MUTE_MASK 0x0008 /* SPKR_MUTE */ +#define WM8996_SPKR_MUTE_SHIFT 3 /* SPKR_MUTE */ +#define WM8996_SPKR_MUTE_WIDTH 1 /* SPKR_MUTE */ +#define WM8996_SPKR_MUTE_ZC 0x0004 /* SPKR_MUTE_ZC */ +#define WM8996_SPKR_MUTE_ZC_MASK 0x0004 /* SPKR_MUTE_ZC */ +#define WM8996_SPKR_MUTE_ZC_SHIFT 2 /* SPKR_MUTE_ZC */ +#define WM8996_SPKR_MUTE_ZC_WIDTH 1 /* SPKR_MUTE_ZC */ +#define WM8996_SPKR_SRC_MASK 0x0003 /* SPKR_SRC - [1:0] */ +#define WM8996_SPKR_SRC_SHIFT 0 /* SPKR_SRC - [1:0] */ +#define WM8996_SPKR_SRC_WIDTH 2 /* SPKR_SRC - [1:0] */ + +/* + * R2050 (0x802) - PDM Speaker Mute Sequence + */ +#define WM8996_SPK_MUTE_ENDIAN 0x0100 /* SPK_MUTE_ENDIAN */ +#define WM8996_SPK_MUTE_ENDIAN_MASK 0x0100 /* SPK_MUTE_ENDIAN */ +#define WM8996_SPK_MUTE_ENDIAN_SHIFT 8 /* SPK_MUTE_ENDIAN */ +#define WM8996_SPK_MUTE_ENDIAN_WIDTH 1 /* SPK_MUTE_ENDIAN */ +#define WM8996_SPK_MUTE_SEQ1_MASK 0x00FF /* SPK_MUTE_SEQ1 - [7:0] */ +#define WM8996_SPK_MUTE_SEQ1_SHIFT 0 /* SPK_MUTE_SEQ1 - [7:0] */ +#define WM8996_SPK_MUTE_SEQ1_WIDTH 8 /* SPK_MUTE_SEQ1 - [7:0] */ + +/* + * R2051 (0x803) - PDM Speaker Volume + */ +#define WM8996_SPKR_VOL_MASK 0x00F0 /* SPKR_VOL - [7:4] */ +#define WM8996_SPKR_VOL_SHIFT 4 /* SPKR_VOL - [7:4] */ +#define WM8996_SPKR_VOL_WIDTH 4 /* SPKR_VOL - [7:4] */ +#define WM8996_SPKL_VOL_MASK 0x000F /* SPKL_VOL - [3:0] */ +#define WM8996_SPKL_VOL_SHIFT 0 /* SPKL_VOL - [3:0] */ +#define WM8996_SPKL_VOL_WIDTH 4 /* SPKL_VOL - [3:0] */ + +#endif diff --git a/sound/soc/codecs/wm_hubs.c b/sound/soc/codecs/wm_hubs.c index 4cc2d567f22..e763c54c55d 100644 --- a/sound/soc/codecs/wm_hubs.c +++ b/sound/soc/codecs/wm_hubs.c @@ -440,9 +440,8 @@ static int hp_event(struct snd_soc_dapm_widget *w, reg |= WM8993_HPOUT1L_DLY | WM8993_HPOUT1R_DLY; snd_soc_write(codec, WM8993_ANALOGUE_HP_0, reg); - /* Smallest supported update interval */ snd_soc_update_bits(codec, WM8993_DC_SERVO_1, - WM8993_DCS_TIMER_PERIOD_01_MASK, 1); + WM8993_DCS_TIMER_PERIOD_01_MASK, 0); calibrate_dc_servo(codec); diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig index 54b0e4b7faf..b99091fc34e 100644 --- a/sound/soc/samsung/Kconfig +++ b/sound/soc/samsung/Kconfig @@ -183,7 +183,7 @@ config SND_SOC_SPEYSIDE tristate "Audio support for Wolfson Speyside" depends on SND_SOC_SAMSUNG && MACH_WLF_CRAGG_6410 select SND_SAMSUNG_I2S - select SND_SOC_WM8915 + select SND_SOC_WM8996 select SND_SOC_WM9081 config SND_SOC_SPEYSIDE_WM8962 diff --git a/sound/soc/samsung/speyside.c b/sound/soc/samsung/speyside.c index d6dee4d0203..590e9274b06 100644 --- a/sound/soc/samsung/speyside.c +++ b/sound/soc/samsung/speyside.c @@ -14,10 +14,10 @@ #include <sound/jack.h> #include <linux/gpio.h> -#include "../codecs/wm8915.h" +#include "../codecs/wm8996.h" #include "../codecs/wm9081.h" -#define WM8915_HPSEL_GPIO 214 +#define WM8996_HPSEL_GPIO 214 static int speyside_set_bias_level(struct snd_soc_card *card, struct snd_soc_dapm_context *dapm, @@ -31,12 +31,12 @@ static int speyside_set_bias_level(struct snd_soc_card *card, switch (level) { case SND_SOC_BIAS_STANDBY: - ret = snd_soc_dai_set_sysclk(codec_dai, WM8915_SYSCLK_MCLK2, + ret = snd_soc_dai_set_sysclk(codec_dai, WM8996_SYSCLK_MCLK2, 32768, SND_SOC_CLOCK_IN); if (ret < 0) return ret; - ret = snd_soc_dai_set_pll(codec_dai, WM8915_FLL_MCLK2, + ret = snd_soc_dai_set_pll(codec_dai, WM8996_FLL_MCLK2, 0, 0, 0); if (ret < 0) { pr_err("Failed to stop FLL\n"); @@ -65,7 +65,7 @@ static int speyside_set_bias_level_post(struct snd_soc_card *card, case SND_SOC_BIAS_PREPARE: if (card->dapm.bias_level == SND_SOC_BIAS_STANDBY) { ret = snd_soc_dai_set_pll(codec_dai, 0, - WM8915_FLL_MCLK2, + WM8996_FLL_MCLK2, 32768, 48000 * 256); if (ret < 0) { pr_err("Failed to start FLL\n"); @@ -73,7 +73,7 @@ static int speyside_set_bias_level_post(struct snd_soc_card *card, } ret = snd_soc_dai_set_sysclk(codec_dai, - WM8915_SYSCLK_FLL, + WM8996_SYSCLK_FLL, 48000 * 256, SND_SOC_CLOCK_IN); if (ret < 0) @@ -149,26 +149,26 @@ static void speyside_set_polarity(struct snd_soc_codec *codec, int polarity) { speyside_jack_polarity = !polarity; - gpio_direction_output(WM8915_HPSEL_GPIO, speyside_jack_polarity); + gpio_direction_output(WM8996_HPSEL_GPIO, speyside_jack_polarity); /* Re-run DAPM to make sure we're using the correct mic bias */ snd_soc_dapm_sync(&codec->dapm); } -static int speyside_wm8915_init(struct snd_soc_pcm_runtime *rtd) +static int speyside_wm8996_init(struct snd_soc_pcm_runtime *rtd) { struct snd_soc_dai *dai = rtd->codec_dai; struct snd_soc_codec *codec = rtd->codec; int ret; - ret = snd_soc_dai_set_sysclk(dai, WM8915_SYSCLK_MCLK2, 32768, 0); + ret = snd_soc_dai_set_sysclk(dai, WM8996_SYSCLK_MCLK2, 32768, 0); if (ret < 0) return ret; - ret = gpio_request(WM8915_HPSEL_GPIO, "HP_SEL"); + ret = gpio_request(WM8996_HPSEL_GPIO, "HP_SEL"); if (ret != 0) pr_err("Failed to request HP_SEL GPIO: %d\n", ret); - gpio_direction_output(WM8915_HPSEL_GPIO, speyside_jack_polarity); + gpio_direction_output(WM8996_HPSEL_GPIO, speyside_jack_polarity); ret = snd_soc_jack_new(codec, "Headset", SND_JACK_HEADSET | SND_JACK_BTN_0, @@ -182,7 +182,7 @@ static int speyside_wm8915_init(struct snd_soc_pcm_runtime *rtd) if (ret) return ret; - wm8915_detect(codec, &speyside_headset, speyside_set_polarity); + wm8996_detect(codec, &speyside_headset, speyside_set_polarity); return 0; } @@ -205,16 +205,16 @@ static struct snd_soc_dai_link speyside_dai[] = { .name = "CPU", .stream_name = "CPU", .cpu_dai_name = "samsung-i2s.0", - .codec_dai_name = "wm8915-aif1", + .codec_dai_name = "wm8996-aif1", .platform_name = "samsung-audio", - .codec_name = "wm8915.1-001a", - .init = speyside_wm8915_init, + .codec_name = "wm8996.1-001a", + .init = speyside_wm8996_init, .ops = &speyside_ops, }, { .name = "Baseband", .stream_name = "Baseband", - .cpu_dai_name = "wm8915-aif2", + .cpu_dai_name = "wm8996-aif2", .codec_dai_name = "wm1250-ev1", .codec_name = "wm1250-ev1.1-0027", .ops = &speyside_ops, diff --git a/sound/usb/caiaq/input.c b/sound/usb/caiaq/input.c index 4432ef7a70a..a213813487b 100644 --- a/sound/usb/caiaq/input.c +++ b/sound/usb/caiaq/input.c @@ -30,7 +30,7 @@ static unsigned short keycode_ak1[] = { KEY_C, KEY_B, KEY_A }; static unsigned short keycode_rk2[] = { KEY_1, KEY_2, KEY_3, KEY_4, KEY_5, KEY_6, KEY_7 }; static unsigned short keycode_rk3[] = { KEY_1, KEY_2, KEY_3, KEY_4, - KEY_5, KEY_6, KEY_7, KEY_5, KEY_6 }; + KEY_5, KEY_6, KEY_7, KEY_8, KEY_9 }; static unsigned short keycode_kore[] = { KEY_FN_F1, /* "menu" */ diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c index 7c0d21ecd82..7d46e482375 100644 --- a/sound/usb/endpoint.c +++ b/sound/usb/endpoint.c @@ -352,7 +352,7 @@ int snd_usb_parse_audio_endpoints(struct snd_usb_audio *chip, int iface_no) continue; } if (((protocol == UAC_VERSION_1) && (fmt->bLength < 8)) || - ((protocol == UAC_VERSION_2) && (fmt->bLength != 6))) { + ((protocol == UAC_VERSION_2) && (fmt->bLength < 6))) { snd_printk(KERN_ERR "%d:%u:%d : invalid UAC_FORMAT_TYPE desc\n", dev->devnum, iface_no, altno); continue; diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c index c22fa76e363..c04d7c71ac8 100644 --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -1191,6 +1191,11 @@ static int parse_audio_feature_unit(struct mixer_build *state, int unitid, void if (state->mixer->protocol == UAC_VERSION_1) { csize = hdr->bControlSize; + if (!csize) { + snd_printdd(KERN_ERR "usbaudio: unit %u: " + "invalid bControlSize == 0\n", unitid); + return -EINVAL; + } channels = (hdr->bLength - 7) / csize - 1; bmaControls = hdr->bmaControls; } else { @@ -1934,15 +1939,13 @@ static int snd_usb_mixer_controls(struct usb_mixer_interface *mixer) struct mixer_build state; int err; const struct usbmix_ctl_map *map; - struct usb_host_interface *hostif; void *p; - hostif = mixer->chip->ctrl_intf; memset(&state, 0, sizeof(state)); state.chip = mixer->chip; state.mixer = mixer; - state.buffer = hostif->extra; - state.buflen = hostif->extralen; + state.buffer = mixer->hostif->extra; + state.buflen = mixer->hostif->extralen; /* check the mapping table */ for (map = usbmix_ctl_maps; map->id; map++) { @@ -1955,7 +1958,8 @@ static int snd_usb_mixer_controls(struct usb_mixer_interface *mixer) } p = NULL; - while ((p = snd_usb_find_csint_desc(hostif->extra, hostif->extralen, p, UAC_OUTPUT_TERMINAL)) != NULL) { + while ((p = snd_usb_find_csint_desc(mixer->hostif->extra, mixer->hostif->extralen, + p, UAC_OUTPUT_TERMINAL)) != NULL) { if (mixer->protocol == UAC_VERSION_1) { struct uac1_output_terminal_descriptor *desc = p; @@ -2162,17 +2166,15 @@ int snd_usb_mixer_activate(struct usb_mixer_interface *mixer) /* create the handler for the optional status interrupt endpoint */ static int snd_usb_mixer_status_create(struct usb_mixer_interface *mixer) { - struct usb_host_interface *hostif; struct usb_endpoint_descriptor *ep; void *transfer_buffer; int buffer_length; unsigned int epnum; - hostif = mixer->chip->ctrl_intf; /* we need one interrupt input endpoint */ - if (get_iface_desc(hostif)->bNumEndpoints < 1) + if (get_iface_desc(mixer->hostif)->bNumEndpoints < 1) return 0; - ep = get_endpoint(hostif, 0); + ep = get_endpoint(mixer->hostif, 0); if (!usb_endpoint_dir_in(ep) || !usb_endpoint_xfer_int(ep)) return 0; @@ -2202,7 +2204,6 @@ int snd_usb_create_mixer(struct snd_usb_audio *chip, int ctrlif, }; struct usb_mixer_interface *mixer; struct snd_info_entry *entry; - struct usb_host_interface *host_iface; int err; strcpy(chip->card->mixername, "USB Mixer"); @@ -2219,8 +2220,8 @@ int snd_usb_create_mixer(struct snd_usb_audio *chip, int ctrlif, return -ENOMEM; } - host_iface = &usb_ifnum_to_if(chip->dev, ctrlif)->altsetting[0]; - switch (get_iface_desc(host_iface)->bInterfaceProtocol) { + mixer->hostif = &usb_ifnum_to_if(chip->dev, ctrlif)->altsetting[0]; + switch (get_iface_desc(mixer->hostif)->bInterfaceProtocol) { case UAC_VERSION_1: default: mixer->protocol = UAC_VERSION_1; diff --git a/sound/usb/mixer.h b/sound/usb/mixer.h index ae1a14dcfe8..81b2d8a32fb 100644 --- a/sound/usb/mixer.h +++ b/sound/usb/mixer.h @@ -3,6 +3,7 @@ struct usb_mixer_interface { struct snd_usb_audio *chip; + struct usb_host_interface *hostif; struct list_head list; unsigned int ignore_ctl_error; struct urb *urb; diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index dba0b7f11c5..4d4f86552a2 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -2417,6 +2417,12 @@ YAMAHA_DEVICE(0x7010, "UB99"), .idProduct = 0x1020, }, +/* KeithMcMillen Stringport */ +{ + USB_DEVICE(0x1f38, 0x0001), + .bInterfaceClass = USB_CLASS_AUDIO, +}, + /* Miditech devices */ { USB_DEVICE(0x4752, 0x0011), diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 77762c99afb..81e07d84258 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -426,7 +426,7 @@ static int snd_usb_cm106_boot_quirk(struct usb_device *dev) */ static int snd_usb_cm6206_boot_quirk(struct usb_device *dev) { - int err, reg; + int err = 0, reg; int val[] = {0x2004, 0x3000, 0xf800, 0x143f, 0x0000, 0x3000}; for (reg = 0; reg < ARRAY_SIZE(val); reg++) { diff --git a/tools/perf/Makefile b/tools/perf/Makefile index 56d62d3fb16..3b8f7b80376 100644 --- a/tools/perf/Makefile +++ b/tools/perf/Makefile @@ -181,9 +181,9 @@ strip-libs = $(filter-out -l%,$(1)) $(OUTPUT)python/perf.so: $(PYRF_OBJS) $(QUIET_GEN)CFLAGS='$(BASIC_CFLAGS)' $(PYTHON_WORD) util/setup.py \ - --quiet build_ext \ - --build-lib='$(OUTPUT)python' \ - --build-temp='$(OUTPUT)python/temp' + --quiet build_ext; \ + mkdir -p $(OUTPUT)python && \ + cp $(PYTHON_EXTBUILD_LIB)perf.so $(OUTPUT)python/ # # No Perl scripts right now: # @@ -509,9 +509,13 @@ else PYTHON_WORD := $(call shell-wordify,$(PYTHON)) - python-clean := $(PYTHON_WORD) util/setup.py clean \ - --build-lib='$(OUTPUT)python' \ - --build-temp='$(OUTPUT)python/temp' + # python extension build directories + PYTHON_EXTBUILD := $(OUTPUT)python_ext_build/ + PYTHON_EXTBUILD_LIB := $(PYTHON_EXTBUILD)lib/ + PYTHON_EXTBUILD_TMP := $(PYTHON_EXTBUILD)tmp/ + export PYTHON_EXTBUILD_LIB PYTHON_EXTBUILD_TMP + + python-clean := rm -rf $(PYTHON_EXTBUILD) $(OUTPUT)python/perf.so ifdef NO_LIBPYTHON $(call disable-python) @@ -868,6 +872,9 @@ install: all $(INSTALL) scripts/python/*.py -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/python' $(INSTALL) scripts/python/bin/* -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/python/bin' +install-python_ext: + $(PYTHON_WORD) util/setup.py --quiet install --root='/$(DESTDIR_SQ)' + install-doc: $(MAKE) -C Documentation install @@ -895,7 +902,7 @@ quick-install-html: ### Cleaning rules clean: - $(RM) $(OUTPUT){*.o,*/*.o,*/*/*.o,*/*/*/*.o,$(LIB_FILE),perf-archive} + $(RM) $(LIB_OBJS) $(BUILTIN_OBJS) $(LIB_FILE) $(OUTPUT)perf-archive $(OUTPUT)perf.o $(LANG_BINDINGS) $(RM) $(ALL_PROGRAMS) perf $(RM) *.spec *.pyc *.pyo */*.pyc */*.pyo $(OUTPUT)common-cmds.h TAGS tags cscope* $(MAKE) -C Documentation/ clean diff --git a/tools/perf/builtin-lock.c b/tools/perf/builtin-lock.c index 9ac05aafd9b..899080ace26 100644 --- a/tools/perf/builtin-lock.c +++ b/tools/perf/builtin-lock.c @@ -942,10 +942,10 @@ static const char *record_args[] = { "-f", "-m", "1024", "-c", "1", - "-e", "lock:lock_acquire:r", - "-e", "lock:lock_acquired:r", - "-e", "lock:lock_contended:r", - "-e", "lock:lock_release:r", + "-e", "lock:lock_acquire", + "-e", "lock:lock_acquired", + "-e", "lock:lock_contended", + "-e", "lock:lock_release", }; static int __cmd_record(int argc, const char **argv) diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c index 80dc5b790e4..f6426b496f4 100644 --- a/tools/perf/builtin-record.c +++ b/tools/perf/builtin-record.c @@ -30,8 +30,6 @@ #include <sched.h> #include <sys/mman.h> -#define FD(e, x, y) (*(int *)xyarray__entry(e->fd, x, y)) - enum write_mode_t { WRITE_FORCE, WRITE_APPEND @@ -438,7 +436,6 @@ static void mmap_read_all(void) static int __cmd_record(int argc, const char **argv) { - int i; struct stat st; int flags; int err; @@ -682,7 +679,6 @@ static int __cmd_record(int argc, const char **argv) for (;;) { int hits = samples; - int thread; mmap_read_all(); @@ -693,19 +689,8 @@ static int __cmd_record(int argc, const char **argv) waking++; } - if (done) { - for (i = 0; i < evsel_list->cpus->nr; i++) { - struct perf_evsel *pos; - - list_for_each_entry(pos, &evsel_list->entries, node) { - for (thread = 0; - thread < evsel_list->threads->nr; - thread++) - ioctl(FD(pos, i, thread), - PERF_EVENT_IOC_DISABLE); - } - } - } + if (done) + perf_evlist__disable(evsel_list); } if (quiet || signr == SIGUSR1) diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c index f854efda768..d7ff277bdb7 100644 --- a/tools/perf/builtin-report.c +++ b/tools/perf/builtin-report.c @@ -162,23 +162,22 @@ static int perf_session__setup_sample_type(struct perf_session *self) { if (!(self->sample_type & PERF_SAMPLE_CALLCHAIN)) { if (sort__has_parent) { - fprintf(stderr, "selected --sort parent, but no" - " callchain data. Did you call" - " perf record without -g?\n"); + ui__warning("Selected --sort parent, but no " + "callchain data. Did you call " + "'perf record' without -g?\n"); return -EINVAL; } if (symbol_conf.use_callchain) { - fprintf(stderr, "selected -g but no callchain data." - " Did you call perf record without" - " -g?\n"); + ui__warning("Selected -g but no callchain data. Did " + "you call 'perf record' without -g?\n"); return -1; } } else if (!dont_use_callchains && callchain_param.mode != CHAIN_NONE && !symbol_conf.use_callchain) { symbol_conf.use_callchain = true; if (callchain_register_param(&callchain_param) < 0) { - fprintf(stderr, "Can't register callchain" - " params\n"); + ui__warning("Can't register callchain " + "params.\n"); return -EINVAL; } } diff --git a/tools/perf/builtin-sched.c b/tools/perf/builtin-sched.c index dcfe8873c9a..5177964943e 100644 --- a/tools/perf/builtin-sched.c +++ b/tools/perf/builtin-sched.c @@ -1637,23 +1637,29 @@ static struct perf_event_ops event_ops = { .ordered_samples = true, }; -static int read_events(void) +static void read_events(bool destroy, struct perf_session **psession) { int err = -EINVAL; struct perf_session *session = perf_session__new(input_name, O_RDONLY, 0, false, &event_ops); if (session == NULL) - return -ENOMEM; + die("No Memory"); if (perf_session__has_traces(session, "record -R")) { err = perf_session__process_events(session, &event_ops); + if (err) + die("Failed to process events, error %d", err); + nr_events = session->hists.stats.nr_events[0]; nr_lost_events = session->hists.stats.total_lost; nr_lost_chunks = session->hists.stats.nr_events[PERF_RECORD_LOST]; } - perf_session__delete(session); - return err; + if (destroy) + perf_session__delete(session); + + if (psession) + *psession = session; } static void print_bad_events(void) @@ -1689,9 +1695,10 @@ static void print_bad_events(void) static void __cmd_lat(void) { struct rb_node *next; + struct perf_session *session; setup_pager(); - read_events(); + read_events(false, &session); sort_lat(); printf("\n ---------------------------------------------------------------------------------------------------------------\n"); @@ -1717,6 +1724,7 @@ static void __cmd_lat(void) print_bad_events(); printf("\n"); + perf_session__delete(session); } static struct trace_sched_handler map_ops = { @@ -1731,7 +1739,7 @@ static void __cmd_map(void) max_cpu = sysconf(_SC_NPROCESSORS_CONF); setup_pager(); - read_events(); + read_events(true, NULL); print_bad_events(); } @@ -1744,7 +1752,7 @@ static void __cmd_replay(void) test_calibrations(); - read_events(); + read_events(true, NULL); printf("nr_run_events: %ld\n", nr_run_events); printf("nr_sleep_events: %ld\n", nr_sleep_events); @@ -1769,7 +1777,7 @@ static void __cmd_replay(void) static const char * const sched_usage[] = { - "perf sched [<options>] {record|latency|map|replay|trace}", + "perf sched [<options>] {record|latency|map|replay|script}", NULL }; diff --git a/tools/perf/util/config.c b/tools/perf/util/config.c index e02d78cae70..fe02903f7d0 100644 --- a/tools/perf/util/config.c +++ b/tools/perf/util/config.c @@ -399,7 +399,6 @@ static int perf_config_global(void) int perf_config(config_fn_t fn, void *data) { int ret = 0, found = 0; - char *repo_config = NULL; const char *home = NULL; /* Setting $PERF_CONFIG makes perf read _only_ the given config file. */ @@ -414,19 +413,32 @@ int perf_config(config_fn_t fn, void *data) home = getenv("HOME"); if (perf_config_global() && home) { char *user_config = strdup(mkpath("%s/.perfconfig", home)); - if (!access(user_config, R_OK)) { - ret += perf_config_from_file(fn, user_config, data); - found += 1; + struct stat st; + + if (user_config == NULL) { + warning("Not enough memory to process %s/.perfconfig, " + "ignoring it.", home); + goto out; } - free(user_config); - } - repo_config = perf_pathdup("config"); - if (!access(repo_config, R_OK)) { - ret += perf_config_from_file(fn, repo_config, data); + if (stat(user_config, &st) < 0) + goto out_free; + + if (st.st_uid && (st.st_uid != geteuid())) { + warning("File %s not owned by current user or root, " + "ignoring it.", user_config); + goto out_free; + } + + if (!st.st_size) + goto out_free; + + ret += perf_config_from_file(fn, user_config, data); found += 1; +out_free: + free(user_config); } - free(repo_config); +out: if (found == 0) return -1; return ret; diff --git a/tools/perf/util/evlist.c b/tools/perf/util/evlist.c index b021ea9265c..e03e7bc8205 100644 --- a/tools/perf/util/evlist.c +++ b/tools/perf/util/evlist.c @@ -91,6 +91,19 @@ int perf_evlist__add_default(struct perf_evlist *evlist) return 0; } +void perf_evlist__disable(struct perf_evlist *evlist) +{ + int cpu, thread; + struct perf_evsel *pos; + + for (cpu = 0; cpu < evlist->cpus->nr; cpu++) { + list_for_each_entry(pos, &evlist->entries, node) { + for (thread = 0; thread < evlist->threads->nr; thread++) + ioctl(FD(pos, cpu, thread), PERF_EVENT_IOC_DISABLE); + } + } +} + int perf_evlist__alloc_pollfd(struct perf_evlist *evlist) { int nfds = evlist->cpus->nr * evlist->threads->nr * evlist->nr_entries; diff --git a/tools/perf/util/evlist.h b/tools/perf/util/evlist.h index b2b862374f3..ce85ae9ae57 100644 --- a/tools/perf/util/evlist.h +++ b/tools/perf/util/evlist.h @@ -53,6 +53,8 @@ int perf_evlist__alloc_mmap(struct perf_evlist *evlist); int perf_evlist__mmap(struct perf_evlist *evlist, int pages, bool overwrite); void perf_evlist__munmap(struct perf_evlist *evlist); +void perf_evlist__disable(struct perf_evlist *evlist); + static inline void perf_evlist__set_maps(struct perf_evlist *evlist, struct cpu_map *cpus, struct thread_map *threads) diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c index cb2959a3fb4..d4f3101773d 100644 --- a/tools/perf/util/header.c +++ b/tools/perf/util/header.c @@ -189,8 +189,8 @@ int build_id_cache__add_s(const char *sbuild_id, const char *debugdir, const char *name, bool is_kallsyms) { const size_t size = PATH_MAX; - char *realname, *filename = malloc(size), - *linkname = malloc(size), *targetname; + char *realname, *filename = zalloc(size), + *linkname = zalloc(size), *targetname; int len, err = -1; if (is_kallsyms) { @@ -254,8 +254,8 @@ static int build_id_cache__add_b(const u8 *build_id, size_t build_id_size, int build_id_cache__remove_s(const char *sbuild_id, const char *debugdir) { const size_t size = PATH_MAX; - char *filename = malloc(size), - *linkname = malloc(size); + char *filename = zalloc(size), + *linkname = zalloc(size); int err = -1; if (filename == NULL || linkname == NULL) diff --git a/tools/perf/util/probe-event.c b/tools/perf/util/probe-event.c index b82d54fa2c5..1c7bfa5fe0a 100644 --- a/tools/perf/util/probe-event.c +++ b/tools/perf/util/probe-event.c @@ -1820,11 +1820,15 @@ static int convert_to_probe_trace_events(struct perf_probe_event *pev, ret = -ENOMEM; goto error; } - tev->point.module = strdup(module); - if (tev->point.module == NULL) { - ret = -ENOMEM; - goto error; + + if (module) { + tev->point.module = strdup(module); + if (tev->point.module == NULL) { + ret = -ENOMEM; + goto error; + } } + tev->point.offset = pev->point.offset; tev->point.retprobe = pev->point.retprobe; tev->nargs = pev->nargs; diff --git a/tools/perf/util/python.c b/tools/perf/util/python.c index 8e0b5a39d8a..cbc8f215d4b 100644 --- a/tools/perf/util/python.c +++ b/tools/perf/util/python.c @@ -187,16 +187,119 @@ static PyTypeObject pyrf_throttle_event__type = { .tp_repr = (reprfunc)pyrf_throttle_event__repr, }; +static char pyrf_lost_event__doc[] = PyDoc_STR("perf lost event object."); + +static PyMemberDef pyrf_lost_event__members[] = { + sample_members + member_def(lost_event, id, T_ULONGLONG, "event id"), + member_def(lost_event, lost, T_ULONGLONG, "number of lost events"), + { .name = NULL, }, +}; + +static PyObject *pyrf_lost_event__repr(struct pyrf_event *pevent) +{ + PyObject *ret; + char *s; + + if (asprintf(&s, "{ type: lost, id: %#" PRIx64 ", " + "lost: %#" PRIx64 " }", + pevent->event.lost.id, pevent->event.lost.lost) < 0) { + ret = PyErr_NoMemory(); + } else { + ret = PyString_FromString(s); + free(s); + } + return ret; +} + +static PyTypeObject pyrf_lost_event__type = { + PyVarObject_HEAD_INIT(NULL, 0) + .tp_name = "perf.lost_event", + .tp_basicsize = sizeof(struct pyrf_event), + .tp_flags = Py_TPFLAGS_DEFAULT|Py_TPFLAGS_BASETYPE, + .tp_doc = pyrf_lost_event__doc, + .tp_members = pyrf_lost_event__members, + .tp_repr = (reprfunc)pyrf_lost_event__repr, +}; + +static char pyrf_read_event__doc[] = PyDoc_STR("perf read event object."); + +static PyMemberDef pyrf_read_event__members[] = { + sample_members + member_def(read_event, pid, T_UINT, "event pid"), + member_def(read_event, tid, T_UINT, "event tid"), + { .name = NULL, }, +}; + +static PyObject *pyrf_read_event__repr(struct pyrf_event *pevent) +{ + return PyString_FromFormat("{ type: read, pid: %u, tid: %u }", + pevent->event.read.pid, + pevent->event.read.tid); + /* + * FIXME: return the array of read values, + * making this method useful ;-) + */ +} + +static PyTypeObject pyrf_read_event__type = { + PyVarObject_HEAD_INIT(NULL, 0) + .tp_name = "perf.read_event", + .tp_basicsize = sizeof(struct pyrf_event), + .tp_flags = Py_TPFLAGS_DEFAULT|Py_TPFLAGS_BASETYPE, + .tp_doc = pyrf_read_event__doc, + .tp_members = pyrf_read_event__members, + .tp_repr = (reprfunc)pyrf_read_event__repr, +}; + +static char pyrf_sample_event__doc[] = PyDoc_STR("perf sample event object."); + +static PyMemberDef pyrf_sample_event__members[] = { + sample_members + member_def(perf_event_header, type, T_UINT, "event type"), + { .name = NULL, }, +}; + +static PyObject *pyrf_sample_event__repr(struct pyrf_event *pevent) +{ + PyObject *ret; + char *s; + + if (asprintf(&s, "{ type: sample }") < 0) { + ret = PyErr_NoMemory(); + } else { + ret = PyString_FromString(s); + free(s); + } + return ret; +} + +static PyTypeObject pyrf_sample_event__type = { + PyVarObject_HEAD_INIT(NULL, 0) + .tp_name = "perf.sample_event", + .tp_basicsize = sizeof(struct pyrf_event), + .tp_flags = Py_TPFLAGS_DEFAULT|Py_TPFLAGS_BASETYPE, + .tp_doc = pyrf_sample_event__doc, + .tp_members = pyrf_sample_event__members, + .tp_repr = (reprfunc)pyrf_sample_event__repr, +}; + static int pyrf_event__setup_types(void) { int err; pyrf_mmap_event__type.tp_new = pyrf_task_event__type.tp_new = pyrf_comm_event__type.tp_new = + pyrf_lost_event__type.tp_new = + pyrf_read_event__type.tp_new = + pyrf_sample_event__type.tp_new = pyrf_throttle_event__type.tp_new = PyType_GenericNew; err = PyType_Ready(&pyrf_mmap_event__type); if (err < 0) goto out; + err = PyType_Ready(&pyrf_lost_event__type); + if (err < 0) + goto out; err = PyType_Ready(&pyrf_task_event__type); if (err < 0) goto out; @@ -206,20 +309,26 @@ static int pyrf_event__setup_types(void) err = PyType_Ready(&pyrf_throttle_event__type); if (err < 0) goto out; + err = PyType_Ready(&pyrf_read_event__type); + if (err < 0) + goto out; + err = PyType_Ready(&pyrf_sample_event__type); + if (err < 0) + goto out; out: return err; } static PyTypeObject *pyrf_event__type[] = { [PERF_RECORD_MMAP] = &pyrf_mmap_event__type, - [PERF_RECORD_LOST] = &pyrf_mmap_event__type, + [PERF_RECORD_LOST] = &pyrf_lost_event__type, [PERF_RECORD_COMM] = &pyrf_comm_event__type, [PERF_RECORD_EXIT] = &pyrf_task_event__type, [PERF_RECORD_THROTTLE] = &pyrf_throttle_event__type, [PERF_RECORD_UNTHROTTLE] = &pyrf_throttle_event__type, [PERF_RECORD_FORK] = &pyrf_task_event__type, - [PERF_RECORD_READ] = &pyrf_mmap_event__type, - [PERF_RECORD_SAMPLE] = &pyrf_mmap_event__type, + [PERF_RECORD_READ] = &pyrf_read_event__type, + [PERF_RECORD_SAMPLE] = &pyrf_sample_event__type, }; static PyObject *pyrf_event__new(union perf_event *event) diff --git a/tools/perf/util/setup.py b/tools/perf/util/setup.py index bbc982f5dd8..95d37007492 100644 --- a/tools/perf/util/setup.py +++ b/tools/perf/util/setup.py @@ -3,9 +3,27 @@ from distutils.core import setup, Extension from os import getenv +from distutils.command.build_ext import build_ext as _build_ext +from distutils.command.install_lib import install_lib as _install_lib + +class build_ext(_build_ext): + def finalize_options(self): + _build_ext.finalize_options(self) + self.build_lib = build_lib + self.build_temp = build_tmp + +class install_lib(_install_lib): + def finalize_options(self): + _install_lib.finalize_options(self) + self.build_dir = build_lib + + cflags = ['-fno-strict-aliasing', '-Wno-write-strings'] cflags += getenv('CFLAGS', '').split() +build_lib = getenv('PYTHON_EXTBUILD_LIB') +build_tmp = getenv('PYTHON_EXTBUILD_TMP') + perf = Extension('perf', sources = ['util/python.c', 'util/ctype.c', 'util/evlist.c', 'util/evsel.c', 'util/cpumap.c', 'util/thread_map.c', @@ -21,4 +39,5 @@ setup(name='perf', author_email='acme@redhat.com', license='GPLv2', url='http://perf.wiki.kernel.org', - ext_modules=[perf]) + ext_modules=[perf], + cmdclass={'build_ext': build_ext, 'install_lib': install_lib}) diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c index eec196329fd..a8b53714542 100644 --- a/tools/perf/util/symbol.c +++ b/tools/perf/util/symbol.c @@ -1504,6 +1504,17 @@ int dso__load(struct dso *dso, struct map *map, symbol_filter_t filter) dso->adjust_symbols = 0; if (strncmp(dso->name, "/tmp/perf-", 10) == 0) { + struct stat st; + + if (stat(dso->name, &st) < 0) + return -1; + + if (st.st_uid && (st.st_uid != geteuid())) { + pr_warning("File %s not owned by current user or root, " + "ignoring it.\n", dso->name); + return -1; + } + ret = dso__load_perf_map(dso, map, filter); dso->symtab_type = ret > 0 ? SYMTAB__JAVA_JIT : SYMTAB__NOT_FOUND; |