Merge tag 'regulator-v3.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "A respin of the merges in the previous pull request with one extra
  fix.

  A quiet release for the regulator API, quite a large number of small
  improvements all over but other than the addition of new drivers for
  the AS3722 and MAX14577 there is nothing of substantial non-local
  impact"

* tag 'regulator-v3.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (47 commits)
  regulator: pfuze100-regulator: Improve dev_info() message
  regulator: pfuze100-regulator: Fix some checkpatch complaints
  regulator: twl: Fix checkpatch issue
  regulator: core: Fix checkpatch issue
  regulator: anatop-regulator: Remove unneeded memset()
  regulator: s5m8767: Update LDO index in s5m8767-regulator.txt
  regulator: as3722: set enable time for SD0/1/6
  regulator: as3722: detect SD0 low-voltage mode
  regulator: tps62360: Fix up a pointer-integer size mismatch warning
  regulator: anatop-regulator: Remove unneeded kstrdup()
  regulator: act8865: Fix build error when !OF
  regulator: act8865: register all regulators regardless of how many are used
  regulator: wm831x-dcdc: Remove unneeded 'err' label
  regulator: anatop-regulator: Add MODULE_ALIAS()
  regulator: act8865: fix incorrect devm_kzalloc for act8865
  regulator: act8865: Remove set_suspend_[en|dis]able implementation
  regulator: act8865: Remove unneeded regulator_unregister() calls
  regulator: s2mps11: Clean up redundant code
  regulator: tps65910: Simplify setting enable_mask for regulators
  regulator: act8865: add device tree binding doc
  ...

36 files changed, 1017 insertions, 460 deletions

diff --git a/Documentation/devicetree/bindings/mfd/tps65910.txt b/Documentation/devicetree/bindings/mfd/tps65910.txt
index 2e3304888ff..b4bd98af1cc 100644
--- a/Documentation/devicetree/bindings/mfd/tps65910.txt
+++ b/Documentation/devicetree/bindings/mfd/tps65910.txt
@@ -21,7 +21,7 @@ Required properties:
 
   The valid regulator-compatible values are:
   tps65910: vrtc, vio, vdd1, vdd2, vdd3, vdig1, vdig2, vpll, vdac, vaux1,
-            vaux2, vaux33, vmmc
+            vaux2, vaux33, vmmc, vbb
   tps65911: vrtc, vio, vdd1, vdd3, vddctrl, ldo1, ldo2, ldo3, ldo4, ldo5,
             ldo6, ldo7, ldo8
 
@@ -38,7 +38,7 @@ Required properties:
 	vcc4-supply: VAUX1 and VAUX2 input.
 	vcc5-supply: VPLL and VDAC input.
 	vcc6-supply: VDIG1 and VDIG2 input.
-	vcc7-supply: VRTC input.
+	vcc7-supply: VRTC and VBB input.
 	vccio-supply: VIO input.
   tps65911:
 	vcc1-supply: VDD1 input.
diff --git a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt
new file mode 100644
index 00000000000..bef1fbb647c
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt
@@ -0,0 +1,60 @@
+ACT8865 regulator
+-------------------
+
+Required properties:
+- compatible: "active-semi,act8865"
+- reg: I2C slave address
+
+Any standard regulator properties can be used to configure the single regulator.
+
+The valid names for regulators are:
+	DCDC_REG1, DCDC_REG2, DCDC_REG3, LDO_REG1, LDO_REG2, LDO_REG3, LDO_REG4.
+
+Example:
+--------
+
+		i2c1: i2c@f0018000 {
+			pmic: act8865@5b {
+				compatible = "active-semi,act8865";
+				reg = <0x5b>;
+				status = "disabled";
+
+				regulators {
+					vcc_1v8_reg: DCDC_REG1 {
+						regulator-name = "VCC_1V8";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+					};
+
+					vcc_1v2_reg: DCDC_REG2 {
+						regulator-name = "VCC_1V2";
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <1300000>;
+						regulator-suspend-mem-microvolt = <1150000>;
+						regulator-suspend-standby-microvolt = <1150000>;
+						regulator-always-on;
+					};
+
+					vcc_3v3_reg: DCDC_REG3 {
+						regulator-name = "VCC_3V3";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+					};
+
+					vddana_reg: LDO_REG1 {
+						regulator-name = "VDDANA";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+					};
+
+					vddfuse_reg: LDO_REG2 {
+						regulator-name = "FUSE_2V5";
+						regulator-min-microvolt = <2500000>;
+						regulator-max-microvolt = <2500000>;
+					};
+				};
+			};
+		};
diff --git a/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt b/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt
index d1660a90fc0..fc6b38f035b 100644
--- a/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt
@@ -83,7 +83,7 @@ as per the datasheet of s5m8767.
 
 	- LDOn
 		  - valid values for n are 1 to 28
-		  - Example: LDO0, LD01, LDO28
+		  - Example: LDO1, LD02, LDO28
 	- BUCKn
 		  - valid values for n are 1 to 9.
 		  - Example: BUCK1, BUCK2, BUCK9
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 5780ffcd79a..3f900cd51bf 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -3,6 +3,7 @@ Device tree binding vendor prefix registry.  Keep list in alphabetical order.
 This isn't an exhaustive list, but you should add new prefixes to it before
 using them to avoid name-space collisions.
 
+active-semi	Active-Semi International Inc
 ad	Avionic Design GmbH
 adi	Analog Devices, Inc.
 aeroflexgaisler	Aeroflex Gaisler AB
diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c
index 6841d6805fd..41ab5e34d2a 100644
--- a/drivers/mfd/pcf50633-core.c
+++ b/drivers/mfd/pcf50633-core.c
@@ -245,7 +245,7 @@ static int pcf50633_probe(struct i2c_client *client,
 	for (i = 0; i < PCF50633_NUM_REGULATORS; i++) {
 		struct platform_device *pdev;
 
-		pdev = platform_device_alloc("pcf50633-regltr", i);
+		pdev = platform_device_alloc("pcf50633-regulator", i);
 		if (!pdev) {
 			dev_err(pcf->dev, "Cannot create regulator %d\n", i);
 			continue;
diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c
index e4671088f07..a139798b806 100644
--- a/drivers/mfd/sec-core.c
+++ b/drivers/mfd/sec-core.c
@@ -81,36 +81,6 @@ static struct of_device_id sec_dt_match[] = {
 };
 #endif
 
-int sec_reg_read(struct sec_pmic_dev *sec_pmic, u8 reg, void *dest)
-{
-	return regmap_read(sec_pmic->regmap_pmic, reg, dest);
-}
-EXPORT_SYMBOL_GPL(sec_reg_read);
-
-int sec_bulk_read(struct sec_pmic_dev *sec_pmic, u8 reg, int count, u8 *buf)
-{
-	return regmap_bulk_read(sec_pmic->regmap_pmic, reg, buf, count);
-}
-EXPORT_SYMBOL_GPL(sec_bulk_read);
-
-int sec_reg_write(struct sec_pmic_dev *sec_pmic, u8 reg, u8 value)
-{
-	return regmap_write(sec_pmic->regmap_pmic, reg, value);
-}
-EXPORT_SYMBOL_GPL(sec_reg_write);
-
-int sec_bulk_write(struct sec_pmic_dev *sec_pmic, u8 reg, int count, u8 *buf)
-{
-	return regmap_raw_write(sec_pmic->regmap_pmic, reg, buf, count);
-}
-EXPORT_SYMBOL_GPL(sec_bulk_write);
-
-int sec_reg_update(struct sec_pmic_dev *sec_pmic, u8 reg, u8 val, u8 mask)
-{
-	return regmap_update_bits(sec_pmic->regmap_pmic, reg, mask, val);
-}
-EXPORT_SYMBOL_GPL(sec_reg_update);
-
 static bool s2mps11_volatile(struct device *dev, unsigned int reg)
 {
 	switch (reg) {
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index db9ae6fa240..6a7932822e3 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -70,6 +70,14 @@ config REGULATOR_88PM8607
 	help
 	  This driver supports 88PM8607 voltage regulator chips.
 
+config REGULATOR_ACT8865
+	tristate "Active-semi act8865 voltage regulator"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  This driver controls a active-semi act8865 voltage output
+	  regulator via I2C bus.
+
 config REGULATOR_AD5398
 	tristate "Analog Devices AD5398/AD5821 regulators"
 	depends on I2C
@@ -249,6 +257,13 @@ config REGULATOR_LP8788
 	help
 	  This driver supports LP8788 voltage regulator chip.
 
+config REGULATOR_MAX14577
+	tristate "Maxim 14577 regulator"
+	depends on MFD_MAX14577
+	help
+	  This driver controls a Maxim 14577 regulator via I2C bus.
+	  The regulators include safeout LDO and current regulator 'CHARGER'.
+
 config REGULATOR_MAX1586
 	tristate "Maxim 1586/1587 voltage regulator"
 	depends on I2C
@@ -384,7 +399,7 @@ config REGULATOR_PCF50633
 	 on PCF50633
 
 config REGULATOR_PFUZE100
-	tristate "Support regulators on Freescale PFUZE100 PMIC"
+	tristate "Freescale PFUZE100 regulator driver"
 	depends on I2C
 	select REGMAP_I2C
 	help
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 01c597ea174..979f9ddcf25 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o
 obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o
 obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o
 obj-$(CONFIG_REGULATOR_AB8500)	+= ab8500-ext.o ab8500.o
+obj-$(CONFIG_REGULATOR_ACT8865) += act8865-regulator.o
 obj-$(CONFIG_REGULATOR_AD5398) += ad5398.o
 obj-$(CONFIG_REGULATOR_ANATOP) += anatop-regulator.o
 obj-$(CONFIG_REGULATOR_ARIZONA) += arizona-micsupp.o arizona-ldo1.o
@@ -35,6 +36,7 @@ obj-$(CONFIG_REGULATOR_LP872X) += lp872x.o
 obj-$(CONFIG_REGULATOR_LP8788) += lp8788-buck.o
 obj-$(CONFIG_REGULATOR_LP8788) += lp8788-ldo.o
 obj-$(CONFIG_REGULATOR_LP8755) += lp8755.o
+obj-$(CONFIG_REGULATOR_MAX14577) += max14577.o
 obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
 obj-$(CONFIG_REGULATOR_MAX8649)	+= max8649.o
 obj-$(CONFIG_REGULATOR_MAX8660) += max8660.o
diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index 603f192e84f..c625468c7f2 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -2998,37 +2998,6 @@ static void abx500_get_regulator_info(struct ab8500 *ab8500)
 	}
 }
 
-static int ab8500_regulator_init_registers(struct platform_device *pdev,
-					   int id, int mask, int value)
-{
-	struct ab8500_reg_init *reg_init = abx500_regulator.init;
-	int err;
-
-	BUG_ON(value & ~mask);
-	BUG_ON(mask & ~reg_init[id].mask);
-
-	/* initialize register */
-	err = abx500_mask_and_set_register_interruptible(
-		&pdev->dev,
-		reg_init[id].bank,
-		reg_init[id].addr,
-		mask, value);
-	if (err < 0) {
-		dev_err(&pdev->dev,
-			"Failed to initialize 0x%02x, 0x%02x.\n",
-			reg_init[id].bank,
-			reg_init[id].addr);
-		return err;
-	}
-	dev_vdbg(&pdev->dev,
-		 "  init: 0x%02x, 0x%02x, 0x%02x, 0x%02x\n",
-		 reg_init[id].bank,
-		 reg_init[id].addr,
-		 mask, value);
-
-	return 0;
-}
-
 static int ab8500_regulator_register(struct platform_device *pdev,
 				     struct regulator_init_data *init_data,
 				     int id, struct device_node *np)
@@ -3036,7 +3005,6 @@ static int ab8500_regulator_register(struct platform_device *pdev,
 	struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
 	struct ab8500_regulator_info *info = NULL;
 	struct regulator_config config = { };
-	int err;
 
 	/* assign per-regulator data */
 	info = &abx500_regulator.info[id];
@@ -3058,17 +3026,12 @@ static int ab8500_regulator_register(struct platform_device *pdev,
 	}
 
 	/* register regulator with framework */
-	info->regulator = regulator_register(&info->desc, &config);
+	info->regulator = devm_regulator_register(&pdev->dev, &info->desc,
+						&config);
 	if (IS_ERR(info->regulator)) {
-		err = PTR_ERR(info->regulator);
 		dev_err(&pdev->dev, "failed to register regulator %s\n",
 			info->desc.name);
-		/* when we fail, un-register all earlier regulators */
-		while (--id >= 0) {
-			info = &abx500_regulator.info[id];
-			regulator_unregister(info->regulator);
-		}
-		return err;
+		return PTR_ERR(info->regulator);
 	}
 
 	return 0;
@@ -3095,9 +3058,7 @@ static int ab8500_regulator_probe(struct platform_device *pdev)
 {
 	struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
 	struct device_node *np = pdev->dev.of_node;
-	struct ab8500_platform_data *ppdata;
-	struct ab8500_regulator_platform_data *pdata;
-	int i, err;
+	int err;
 
 	if (!ab8500) {
 		dev_err(&pdev->dev, "null mfd parent\n");
@@ -3106,83 +3067,20 @@ static int ab8500_regulator_probe(struct platform_device *pdev)
 
 	abx500_get_regulator_info(ab8500);
 
-	if (np) {
-		err = of_regulator_match(&pdev->dev, np,
-					 abx500_regulator.match,
-					 abx500_regulator.match_size);
-		if (err < 0) {
-			dev_err(&pdev->dev,
-				"Error parsing regulator init data: %d\n", err);
-			return err;
-		}
-
-		err = ab8500_regulator_of_probe(pdev, np);
-		return err;
-	}
-
-	ppdata = dev_get_platdata(ab8500->dev);
-	if (!ppdata) {
-		dev_err(&pdev->dev, "null parent pdata\n");
-		return -EINVAL;
-	}
-
-	pdata = ppdata->regulator;
-	if (!pdata) {
-		dev_err(&pdev->dev, "null pdata\n");
-		return -EINVAL;
-	}
-
-	/* make sure the platform data has the correct size */
-	if (pdata->num_regulator != abx500_regulator.info_size) {
-		dev_err(&pdev->dev, "Configuration error: size mismatch.\n");
-		return -EINVAL;
-	}
-
-	/* initialize debug (initial state is recorded with this call) */
-	err = ab8500_regulator_debug_init(pdev);
-	if (err)
+	err = of_regulator_match(&pdev->dev, np,
+				 abx500_regulator.match,
+				 abx500_regulator.match_size);
+	if (err < 0) {
+		dev_err(&pdev->dev,
+			"Error parsing regulator init data: %d\n", err);
 		return err;
-
-	/* initialize registers */
-	for (i = 0; i < pdata->num_reg_init; i++) {
-		int id, mask, value;
-
-		id = pdata->reg_init[i].id;
-		mask = pdata->reg_init[i].mask;
-		value = pdata->reg_init[i].value;
-
-		/* check for configuration errors */
-		BUG_ON(id >= abx500_regulator.init_size);
-
-		err = ab8500_regulator_init_registers(pdev, id, mask, value);
-		if (err < 0)
-			return err;
 	}
-
-	/* register all regulators */
-	for (i = 0; i < abx500_regulator.info_size; i++) {
-		err = ab8500_regulator_register(pdev, &pdata->regulator[i],
-						i, NULL);
-		if (err < 0)
-			return err;
-	}
-
-	return 0;
+	return ab8500_regulator_of_probe(pdev, np);
 }
 
 static int ab8500_regulator_remove(struct platform_device *pdev)
 {
-	int i, err;
-
-	for (i = 0; i < abx500_regulator.info_size; i++) {
-		struct ab8500_regulator_info *info = NULL;
-		info = &abx500_regulator.info[i];
-
-		dev_vdbg(rdev_get_dev(info->regulator),
-			"%s-remove\n", info->desc.name);
-
-		regulator_unregister(info->regulator);
-	}
+	int err;
 
 	/* remove regulator debug */
 	err = ab8500_regulator_debug_exit(pdev);
diff --git a/drivers/regulator/act8865-regulator.c b/drivers/regulator/act8865-regulator.c
new file mode 100644
index 00000000000..084cc0819a5
--- /dev/null
+++ b/drivers/regulator/act8865-regulator.c
@@ -0,0 +1,349 @@
+/*
+ * act8865-regulator.c - Voltage regulation for the active-semi ACT8865
+ * http://www.active-semi.com/sheets/ACT8865_Datasheet.pdf
+ *
+ * Copyright (C) 2013 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/act8865.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/regmap.h>
+
+/*
+ * ACT8865 Global Register Map.
+ */
+#define	ACT8865_SYS_MODE	0x00
+#define	ACT8865_SYS_CTRL	0x01
+#define	ACT8865_DCDC1_VSET1	0x20
+#define	ACT8865_DCDC1_VSET2	0x21
+#define	ACT8865_DCDC1_CTRL	0x22
+#define	ACT8865_DCDC2_VSET1	0x30
+#define	ACT8865_DCDC2_VSET2	0x31
+#define	ACT8865_DCDC2_CTRL	0x32
+#define	ACT8865_DCDC3_VSET1	0x40
+#define	ACT8865_DCDC3_VSET2	0x41
+#define	ACT8865_DCDC3_CTRL	0x42
+#define	ACT8865_LDO1_VSET	0x50
+#define	ACT8865_LDO1_CTRL	0x51
+#define	ACT8865_LDO2_VSET	0x54
+#define	ACT8865_LDO2_CTRL	0x55
+#define	ACT8865_LDO3_VSET	0x60
+#define	ACT8865_LDO3_CTRL	0x61
+#define	ACT8865_LDO4_VSET	0x64
+#define	ACT8865_LDO4_CTRL	0x65
+
+/*
+ * Field Definitions.
+ */
+#define	ACT8865_ENA		0x80	/* ON - [7] */
+#define	ACT8865_VSEL_MASK	0x3F	/* VSET - [5:0] */
+
+/*
+ * ACT8865 voltage number
+ */
+#define	ACT8865_VOLTAGE_NUM	64
+
+struct act8865 {
+	struct regulator_dev *rdev[ACT8865_REG_NUM];
+	struct regmap *regmap;
+};
+
+static const struct regmap_config act8865_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static const struct regulator_linear_range act8865_volatge_ranges[] = {
+	REGULATOR_LINEAR_RANGE(600000, 0, 23, 25000),
+	REGULATOR_LINEAR_RANGE(1200000, 24, 47, 50000),
+	REGULATOR_LINEAR_RANGE(2400000, 48, 63, 100000),
+};
+
+static struct regulator_ops act8865_ops = {
+	.list_voltage		= regulator_list_voltage_linear_range,
+	.map_voltage		= regulator_map_voltage_linear_range,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= regulator_is_enabled_regmap,
+};
+
+static const struct regulator_desc act8865_reg[] = {
+	{
+		.name = "DCDC_REG1",
+		.id = ACT8865_ID_DCDC1,
+		.ops = &act8865_ops,
+		.type = REGULATOR_VOLTAGE,
+		.n_voltages = ACT8865_VOLTAGE_NUM,
+		.linear_ranges = act8865_volatge_ranges,
+		.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
+		.vsel_reg = ACT8865_DCDC1_VSET1,
+		.vsel_mask = ACT8865_VSEL_MASK,
+		.enable_reg = ACT8865_DCDC1_CTRL,
+		.enable_mask = ACT8865_ENA,
+		.owner = THIS_MODULE,
+	},
+	{
+		.name = "DCDC_REG2",
+		.id = ACT8865_ID_DCDC2,
+		.ops = &act8865_ops,
+		.type = REGULATOR_VOLTAGE,
+		.n_voltages = ACT8865_VOLTAGE_NUM,
+		.linear_ranges = act8865_volatge_ranges,
+		.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
+		.vsel_reg = ACT8865_DCDC2_VSET1,
+		.vsel_mask = ACT8865_VSEL_MASK,
+		.enable_reg = ACT8865_DCDC2_CTRL,
+		.enable_mask = ACT8865_ENA,
+		.owner = THIS_MODULE,
+	},
+	{
+		.name = "DCDC_REG3",
+		.id = ACT8865_ID_DCDC3,
+		.ops = &act8865_ops,
+		.type = REGULATOR_VOLTAGE,
+		.n_voltages = ACT8865_VOLTAGE_NUM,
+		.linear_ranges = act8865_volatge_ranges,
+		.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
+		.vsel_reg = ACT8865_DCDC3_VSET1,
+		.vsel_mask = ACT8865_VSEL_MASK,
+		.enable_reg = ACT8865_DCDC3_CTRL,
+		.enable_mask = ACT8865_ENA,
+		.owner = THIS_MODULE,
+	},
+	{
+		.name = "LDO_REG1",
+		.id = ACT8865_ID_LDO1,
+		.ops = &act8865_ops,
+		.type = REGULATOR_VOLTAGE,
+		.n_voltages = ACT8865_VOLTAGE_NUM,
+		.linear_ranges = act8865_volatge_ranges,
+		.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
+		.vsel_reg = ACT8865_LDO1_VSET,
+		.vsel_mask = ACT8865_VSEL_MASK,
+		.enable_reg = ACT8865_LDO1_CTRL,
+		.enable_mask = ACT8865_ENA,
+		.owner = THIS_MODULE,
+	},
+	{
+		.name = "LDO_REG2",
+		.id = ACT8865_ID_LDO2,
+		.ops = &act8865_ops,
+		.type = REGULATOR_VOLTAGE,
+		.n_voltages = ACT8865_VOLTAGE_NUM,
+		.linear_ranges = act8865_volatge_ranges,
+		.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
+		.vsel_reg = ACT8865_LDO2_VSET,
+		.vsel_mask = ACT8865_VSEL_MASK,
+		.enable_reg = ACT8865_LDO2_CTRL,
+		.enable_mask = ACT8865_ENA,
+		.owner = THIS_MODULE,
+	},
+	{
+		.name = "LDO_REG3",
+		.id = ACT8865_ID_LDO3,
+		.ops = &act8865_ops,
+		.type = REGULATOR_VOLTAGE,
+		.n_voltages = ACT8865_VOLTAGE_NUM,
+		.linear_ranges = act8865_volatge_ranges,
+		.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
+		.vsel_reg = ACT8865_LDO3_VSET,
+		.vsel_mask = ACT8865_VSEL_MASK,
+		.enable_reg = ACT8865_LDO3_CTRL,
+		.enable_mask = ACT8865_ENA,
+		.owner = THIS_MODULE,
+	},
+	{
+		.name = "LDO_REG4",
+		.id = ACT8865_ID_LDO4,
+		.ops = &act8865_ops,
+		.type = REGULATOR_VOLTAGE,
+		.n_voltages = ACT8865_VOLTAGE_NUM,
+		.linear_ranges = act8865_volatge_ranges,
+		.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
+		.vsel_reg = ACT8865_LDO4_VSET,
+		.vsel_mask = ACT8865_VSEL_MASK,
+		.enable_reg = ACT8865_LDO4_CTRL,
+		.enable_mask = ACT8865_ENA,
+		.owner = THIS_MODULE,
+	},
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id act8865_dt_ids[] = {
+	{ .compatible = "active-semi,act8865" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, act8865_dt_ids);
+
+static struct of_regulator_match act8865_matches[] = {
+	[ACT8865_ID_DCDC1]	= { .name = "DCDC_REG1"},
+	[ACT8865_ID_DCDC2]	= { .name = "DCDC_REG2"},
+	[ACT8865_ID_DCDC3]	= { .name = "DCDC_REG3"},
+	[ACT8865_ID_LDO1]	= { .name = "LDO_REG1"},
+	[ACT8865_ID_LDO2]	= { .name = "LDO_REG2"},
+	[ACT8865_ID_LDO3]	= { .name = "LDO_REG3"},
+	[ACT8865_ID_LDO4]	= { .name = "LDO_REG4"},
+};
+
+static int act8865_pdata_from_dt(struct device *dev,
+				 struct device_node **of_node,
+				 struct act8865_platform_data *pdata)
+{
+	int matched, i;
+	struct device_node *np;
+	struct act8865_regulator_data *regulator;
+
+	np = of_find_node_by_name(dev->of_node, "regulators");
+	if (!np) {
+		dev_err(dev, "missing 'regulators' subnode in DT\n");
+		return -EINVAL;
+	}
+
+	matched = of_regulator_match(dev, np,
+				act8865_matches, ARRAY_SIZE(act8865_matches));
+	if (matched <= 0)
+		return matched;
+
+	pdata->regulators = devm_kzalloc(dev,
+				sizeof(struct act8865_regulator_data) *
+				ARRAY_SIZE(act8865_matches), GFP_KERNEL);
+	if (!pdata->regulators) {
+		dev_err(dev, "%s: failed to allocate act8865 registor\n",
+						__func__);
+		return -ENOMEM;
+	}
+
+	pdata->num_regulators = matched;
+	regulator = pdata->regulators;
+
+	for (i = 0; i < ARRAY_SIZE(act8865_matches); i++) {
+		regulator->id = i;
+		regulator->name = act8865_matches[i].name;
+		regulator->platform_data = act8865_matches[i].init_data;
+		of_node[i] = act8865_matches[i].of_node;
+		regulator++;
+	}
+
+	return 0;
+}
+#else
+static inline int act8865_pdata_from_dt(struct device *dev,
+					struct device_node **of_node,
+					struct act8865_platform_data *pdata)
+{
+	return 0;
+}
+#endif
+
+static int act8865_pmic_probe(struct i2c_client *client,
+			   const struct i2c_device_id *i2c_id)
+{
+	struct regulator_dev **rdev;
+	struct device *dev = &client->dev;
+	struct act8865_platform_data *pdata = dev_get_platdata(dev);
+	struct regulator_config config = { };
+	struct act8865 *act8865;
+	struct device_node *of_node[ACT8865_REG_NUM];
+	int i, id;
+	int ret = -EINVAL;
+	int error;
+
+	if (dev->of_node && !pdata) {
+		const struct of_device_id *id;
+		struct act8865_platform_data pdata_of;
+
+		id = of_match_device(of_match_ptr(act8865_dt_ids), dev);
+		if (!id)
+			return -ENODEV;
+
+		ret = act8865_pdata_from_dt(dev, of_node, &pdata_of);
+		if (ret < 0)
+			return ret;
+
+		pdata = &pdata_of;
+	}
+
+	if (pdata->num_regulators > ACT8865_REG_NUM) {
+		dev_err(dev, "Too many regulators found!\n");
+		return -EINVAL;
+	}
+
+	act8865 = devm_kzalloc(dev, sizeof(struct act8865), GFP_KERNEL);
+	if (!act8865)
+		return -ENOMEM;
+
+	rdev = act8865->rdev;
+
+	act8865->regmap = devm_regmap_init_i2c(client, &act8865_regmap_config);
+	if (IS_ERR(act8865->regmap)) {
+		error = PTR_ERR(act8865->regmap);
+		dev_err(&client->dev, "Failed to allocate register map: %d\n",
+			error);
+		return error;
+	}
+
+	/* Finally register devices */
+	for (i = 0; i < ACT8865_REG_NUM; i++) {
+
+		id = pdata->regulators[i].id;
+
+		config.dev = dev;
+		config.init_data = pdata->regulators[i].platform_data;
+		config.of_node = of_node[i];
+		config.driver_data = act8865;
+		config.regmap = act8865->regmap;
+
+		rdev[i] = devm_regulator_register(&client->dev,
+						&act8865_reg[i], &config);
+		if (IS_ERR(rdev[i])) {
+			dev_err(dev, "failed to register %s\n",
+				act8865_reg[id].name);
+			return PTR_ERR(rdev[i]);
+		}
+	}
+
+	i2c_set_clientdata(client, act8865);
+
+	return 0;
+}
+
+static const struct i2c_device_id act8865_ids[] = {
+	{ "act8865", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, act8865_ids);
+
+static struct i2c_driver act8865_pmic_driver = {
+	.driver	= {
+		.name	= "act8865",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= act8865_pmic_probe,
+	.id_table	= act8865_ids,
+};
+
+module_i2c_driver(act8865_pmic_driver);
+
+MODULE_DESCRIPTION("active-semi act8865 voltage regulator driver");
+MODULE_AUTHOR("Wenyou Yang <wenyou.yang@atmel.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c
index c734d098082..862e63e451d 100644
--- a/drivers/regulator/anatop-regulator.c
+++ b/