Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (33 commits)
  [PATCH] myri10ge - drop workaround pci_save_state() disabling MSI
  [PATCH] myri10ge - drop workaround for the missing AER ext cap on nVidia CK804
  via-velocity: the link is not correctly detected when the device starts
  [PATCH] add b44 to maintainers
  [PATCH] WAN: ioremap() failure checks in drivers
  [PATCH] WAN: register_hdlc_device() doesn't need dev_alloc_name()
  [PATCH] skb_padto()-area fixes in 8390, wavelan
  [PATCH] make drivers/net/forcedeth.c:nv_update_pause() static
  [PATCH] network driver for Hilscher netx
  [PATCH] Dereference in tokenring/olympic.c
  [PATCH] Array overrun in drivers/net/wireless/wavelan.c
  [PATCH] Remove useless check in drivers/net/pcmcia/xirc2ps_cs.c
  [PATCH] 8139cp: add ethtool eeprom support
  [PATCH] 8139cp: fix eeprom read command length
  [PATCH] b44: update b44 Kconfig entry
  [PATCH] b44: update version to 1.01
  [PATCH] b44: add wol for old nic
  [PATCH] b44: add parameter
  [PATCH] b44: add wol
  [PATCH] b44: fix manual speed/duplex/autoneg settings
  ...

39 files changed, 1608 insertions, 353 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index f4cf0148c90..4dcd2f1f14d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -574,6 +574,12 @@ L:	linuxppc-dev@ozlabs.org
 W:	http://www.penguinppc.org/ppc64/
 S:	Supported
 
+BROADCOM B44 10/100 ETHERNET DRIVER
+P:	Gary Zambrano
+M:	zambrano@broadcom.com
+L:	netdev@vger.kernel.org
+S:	Supported
+
 BROADCOM BNX2 GIGABIT ETHERNET DRIVER
 P:	Michael Chan
 M:	mchan@broadcom.com
diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c
index 46d8c01437e..a26077a175a 100644
--- a/drivers/net/8139cp.c
+++ b/drivers/net/8139cp.c
@@ -401,6 +401,11 @@ static void cp_clean_rings (struct cp_private *cp);
 #ifdef CONFIG_NET_POLL_CONTROLLER
 static void cp_poll_controller(struct net_device *dev);
 #endif
+static int cp_get_eeprom_len(struct net_device *dev);
+static int cp_get_eeprom(struct net_device *dev,
+			 struct ethtool_eeprom *eeprom, u8 *data);
+static int cp_set_eeprom(struct net_device *dev,
+			 struct ethtool_eeprom *eeprom, u8 *data);
 
 static struct pci_device_id cp_pci_tbl[] = {
 	{ PCI_VENDOR_ID_REALTEK, PCI_DEVICE_ID_REALTEK_8139,
@@ -1577,6 +1582,9 @@ static struct ethtool_ops cp_ethtool_ops = {
 	.get_strings		= cp_get_strings,
 	.get_ethtool_stats	= cp_get_ethtool_stats,
 	.get_perm_addr		= ethtool_op_get_perm_addr,
+	.get_eeprom_len		= cp_get_eeprom_len,
+	.get_eeprom		= cp_get_eeprom,
+	.set_eeprom		= cp_set_eeprom,
 };
 
 static int cp_ioctl (struct net_device *dev, struct ifreq *rq, int cmd)
@@ -1612,24 +1620,32 @@ static int cp_ioctl (struct net_device *dev, struct ifreq *rq, int cmd)
 #define eeprom_delay()	readl(ee_addr)
 
 /* The EEPROM commands include the alway-set leading bit. */
+#define EE_EXTEND_CMD	(4)
 #define EE_WRITE_CMD	(5)
 #define EE_READ_CMD		(6)
 #define EE_ERASE_CMD	(7)
 
-static int read_eeprom (void __iomem *ioaddr, int location, int addr_len)
-{
-	int i;
-	unsigned retval = 0;
-	void __iomem *ee_addr = ioaddr + Cfg9346;
-	int read_cmd = location | (EE_READ_CMD << addr_len);
+#define EE_EWDS_ADDR	(0)
+#define EE_WRAL_ADDR	(1)
+#define EE_ERAL_ADDR	(2)
+#define EE_EWEN_ADDR	(3)
+
+#define CP_EEPROM_MAGIC PCI_DEVICE_ID_REALTEK_8139
 
+static void eeprom_cmd_start(void __iomem *ee_addr)
+{
 	writeb (EE_ENB & ~EE_CS, ee_addr);
 	writeb (EE_ENB, ee_addr);
 	eeprom_delay ();
+}
 
-	/* Shift the read command bits out. */
-	for (i = 4 + addr_len; i >= 0; i--) {
-		int dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
+static void eeprom_cmd(void __iomem *ee_addr, int cmd, int cmd_len)
+{
+	int i;
+
+	/* Shift the command bits out. */
+	for (i = cmd_len - 1; i >= 0; i--) {
+		int dataval = (cmd & (1 << i)) ? EE_DATA_WRITE : 0;
 		writeb (EE_ENB | dataval, ee_addr);
 		eeprom_delay ();
 		writeb (EE_ENB | dataval | EE_SHIFT_CLK, ee_addr);
@@ -1637,6 +1653,33 @@ static int read_eeprom (void __iomem *ioaddr, int location, int addr_len)
 	}
 	writeb (EE_ENB, ee_addr);
 	eeprom_delay ();
+}
+
+static void eeprom_cmd_end(void __iomem *ee_addr)
+{
+	writeb (~EE_CS, ee_addr);
+	eeprom_delay ();
+}
+
+static void eeprom_extend_cmd(void __iomem *ee_addr, int extend_cmd,
+			      int addr_len)
+{
+	int cmd = (EE_EXTEND_CMD << addr_len) | (extend_cmd << (addr_len - 2));
+
+	eeprom_cmd_start(ee_addr);
+	eeprom_cmd(ee_addr, cmd, 3 + addr_len);
+	eeprom_cmd_end(ee_addr);
+}
+
+static u16 read_eeprom (void __iomem *ioaddr, int location, int addr_len)
+{
+	int i;
+	u16 retval = 0;
+	void __iomem *ee_addr = ioaddr + Cfg9346;
+	int read_cmd = location | (EE_READ_CMD << addr_len);
+
+	eeprom_cmd_start(ee_addr);
+	eeprom_cmd(ee_addr, read_cmd, 3 + addr_len);
 
 	for (i = 16; i > 0; i--) {
 		writeb (EE_ENB | EE_SHIFT_CLK, ee_addr);
@@ -1648,13 +1691,125 @@ static int read_eeprom (void __iomem *ioaddr, int location, int addr_len)
 		eeprom_delay ();
 	}
 
-	/* Terminate the EEPROM access. */
-	writeb (~EE_CS, ee_addr);
-	eeprom_delay ();
+	eeprom_cmd_end(ee_addr);
 
 	return retval;
 }
 
+static void write_eeprom(void __iomem *ioaddr, int location, u16 val,
+			 int addr_len)
+{
+	int i;
+	void __iomem *ee_addr = ioaddr + Cfg9346;
+	int write_cmd = location | (EE_WRITE_CMD << addr_len);
+
+	eeprom_extend_cmd(ee_addr, EE_EWEN_ADDR, addr_len);
+
+	eeprom_cmd_start(ee_addr);
+	eeprom_cmd(ee_addr, write_cmd, 3 + addr_len);
+	eeprom_cmd(ee_addr, val, 16);
+	eeprom_cmd_end(ee_addr);
+
+	eeprom_cmd_start(ee_addr);
+	for (i = 0; i < 20000; i++)
+		if (readb(ee_addr) & EE_DATA_READ)
+			break;
+	eeprom_cmd_end(ee_addr);
+
+	eeprom_extend_cmd(ee_addr, EE_EWDS_ADDR, addr_len);
+}
+
+static int cp_get_eeprom_len(struct net_device *dev)
+{
+	struct cp_private *cp = netdev_priv(dev);
+	int size;
+
+	spin_lock_irq(&cp->lock);
+	size = read_eeprom(cp->regs, 0, 8) == 0x8129 ? 256 : 128;
+	spin_unlock_irq(&cp->lock);
+
+	return size;
+}
+
+static int cp_get_eeprom(struct net_device *dev,
+			 struct ethtool_eeprom *eeprom, u8 *data)
+{
+	struct cp_private *cp = netdev_priv(dev);
+	unsigned int addr_len;
+	u16 val;
+	u32 offset = eeprom->offset >> 1;
+	u32 len = eeprom->len;
+	u32 i = 0;
+
+	eeprom->magic = CP_EEPROM_MAGIC;
+
+	spin_lock_irq(&cp->lock);
+
+	addr_len = read_eeprom(cp->regs, 0, 8) == 0x8129 ? 8 : 6;
+
+	if (eeprom->offset & 1) {
+		val = read_eeprom(cp->regs, offset, addr_len);
+		data[i++] = (u8)(val >> 8);
+		offset++;
+	}
+
+	while (i < len - 1) {
+		val = read_eeprom(cp->regs, offset, addr_len);
+		data[i++] = (u8)val;
+		data[i++] = (u8)(val >> 8);
+		offset++;
+	}
+
+	if (i < len) {
+		val = read_eeprom(cp->regs, offset, addr_len);
+		data[i] = (u8)val;
+	}
+
+	spin_unlock_irq(&cp->lock);
+	return 0;
+}
+
+static int cp_set_eeprom(struct net_device *dev,
+			 struct ethtool_eeprom *eeprom, u8 *data)
+{
+	struct cp_private *cp = netdev_priv(dev);
+	unsigned int addr_len;
+	u16 val;
+	u32 offset = eeprom->offset >> 1;
+	u32 len = eeprom->len;
+	u32 i = 0;
+
+	if (eeprom->magic != CP_EEPROM_MAGIC)
+		return -EINVAL;
+
+	spin_lock_irq(&cp->lock);
+
+	addr_len = read_eeprom(cp->regs, 0, 8) == 0x8129 ? 8 : 6;
+
+	if (eeprom->offset & 1) {
+		val = read_eeprom(cp->regs, offset, addr_len) & 0xff;
+		val |= (u16)data[i++] << 8;
+		write_eeprom(cp->regs, offset, val, addr_len);
+		offset++;
+	}
+
+	while (i < len - 1) {
+		val = (u16)data[i++];
+		val |= (u16)data[i++] << 8;
+		write_eeprom(cp->regs, offset, val, addr_len);
+		offset++;
+	}
+
+	if (i < len) {
+		val = read_eeprom(cp->regs, offset, addr_len) & 0xff00;
+		val |= (u16)data[i];
+		write_eeprom(cp->regs, offset, val, addr_len);
+	}
+
+	spin_unlock_irq(&cp->lock);
+	return 0;
+}
+
 /* Put the board into D3cold state and wait for WakeUp signal */
 static void cp_set_d3_state (struct cp_private *cp)
 {
diff --git a/drivers/net/8390.c b/drivers/net/8390.c
index f8702742008..86be96af9c8 100644
--- a/drivers/net/8390.c
+++ b/drivers/net/8390.c
@@ -275,12 +275,14 @@ static int ei_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
 	int send_length = skb->len, output_page;
 	unsigned long flags;
+	char buf[ETH_ZLEN];
+	char *data = skb->data;
 
 	if (skb->len < ETH_ZLEN) {
-		skb = skb_padto(skb, ETH_ZLEN);
-		if (skb == NULL)
-			return 0;
+		memset(buf, 0, ETH_ZLEN);	/* more efficient than doing just the needed bits */
+		memcpy(buf, data, skb->len);
 		send_length = ETH_ZLEN;
+		data = buf;
 	}
 
 	/* Mask interrupts from the ethercard. 
@@ -347,7 +349,7 @@ static int ei_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	 * trigger the send later, upon receiving a Tx done interrupt.
 	 */
 	 
-	ei_block_output(dev, send_length, skb->data, output_page);
+	ei_block_output(dev, send_length, data, output_page);
 		
 	if (! ei_local->txing) 
 	{
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index c3c1a8d5f7a..39189903e35 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -854,6 +854,17 @@ config SMC9194
 	  <file:Documentation/networking/net-modules.txt>. The module
 	  will be called smc9194.
 
+config NET_NETX
+	tristate "NetX Ethernet support"
+	select MII
+	depends on NET_ETHERNET && ARCH_NETX
+	help
+	  This is support for the Hilscher netX builtin Ethernet ports
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>. The module
+	  will be called netx-eth.
+
 config DM9000
 	tristate "DM9000 support"
 	depends on (ARM || MIPS) && NET_ETHERNET
@@ -1376,8 +1387,8 @@ config APRICOT
 	  called apricot.
 
 config B44
-	tristate "Broadcom 4400 ethernet support (EXPERIMENTAL)"
-	depends on NET_PCI && PCI && EXPERIMENTAL
+	tristate "Broadcom 4400 ethernet support"
+	depends on NET_PCI && PCI
 	select MII
 	help
 	  If you have a network (Ethernet) controller of this type, say Y and
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 1eced328750..c91e95126f7 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -187,6 +187,7 @@ obj-$(CONFIG_MACSONIC) += macsonic.o
 obj-$(CONFIG_MACMACE) += macmace.o
 obj-$(CONFIG_MAC89x0) += mac89x0.o
 obj-$(CONFIG_TUN) += tun.o
+obj-$(CONFIG_NET_NETX) += netx-eth.o
 obj-$(CONFIG_DL2K) += dl2k.o
 obj-$(CONFIG_R8169) += r8169.o
 obj-$(CONFIG_AMD8111_ETH) += amd8111e.o
diff --git a/drivers/net/arm/at91_ether.c b/drivers/net/arm/at91_ether.c
index 5503dc8a66e..613005a0285 100644
--- a/drivers/net/arm/at91_ether.c
+++ b/drivers/net/arm/at91_ether.c
@@ -43,7 +43,9 @@
 #define DRV_VERSION	"1.0"
 
 static struct net_device *at91_dev;
-static struct clk *ether_clk;
+
+static struct timer_list check_timer;
+#define LINK_POLL_INTERVAL	(HZ)
 
 /* ..................................................................... */
 
@@ -143,7 +145,7 @@ static void read_phy(unsigned char phy_addr, unsigned char address, unsigned int
  * MAC accordingly.
  * If no link or auto-negotiation is busy, then no changes are made.
  */
-static void update_linkspeed(struct net_device *dev)
+static void update_linkspeed(struct net_device *dev, int silent)
 {
 	struct at91_private *lp = (struct at91_private *) dev->priv;
 	unsigned int bmsr, bmcr, lpa, mac_cfg;
@@ -151,7 +153,8 @@ static void update_linkspeed(struct net_device *dev)
 
 	if (!mii_link_ok(&lp->mii)) {		/* no link */
 		netif_carrier_off(dev);
-		printk(KERN_INFO "%s: Link down.\n", dev->name);
+		if (!silent)
+			printk(KERN_INFO "%s: Link down.\n", dev->name);
 		return;
 	}
 
@@ -186,7 +189,8 @@ static void update_linkspeed(struct net_device *dev)
 	}
 	at91_emac_write(AT91_EMAC_CFG, mac_cfg);
 
-	printk(KERN_INFO "%s: Link now %i-%s\n", dev->name, speed, (duplex == DUPLEX_FULL) ? "FullDuplex" : "HalfDuplex");
+	if (!silent)
+		printk(KERN_INFO "%s: Link now %i-%s\n", dev->name, speed, (duplex == DUPLEX_FULL) ? "FullDuplex" : "HalfDuplex");
 	netif_carrier_on(dev);
 }
 
@@ -226,7 +230,7 @@ static irqreturn_t at91ether_phy_interrupt(int irq, void *dev_id, struct pt_regs
 			goto done;
 	}
 
-	update_linkspeed(dev);
+	update_linkspeed(dev, 0);
 
 done:
 	disable_mdi();
@@ -243,14 +247,17 @@ static void enable_phyirq(struct net_device *dev)
 	unsigned int dsintr, irq_number;
 	int status;
 
-	if (lp->phy_type == MII_RTL8201_ID)	/* RTL8201 does not have an interrupt */
-		return;
-	if (lp->phy_type == MII_DP83847_ID)	/* DP83847 does not have an interrupt */
-		return;
-	if (lp->phy_type == MII_AC101L_ID)	/* AC101L interrupt not supported yet */
+	irq_number = lp->board_data.phy_irq_pin;
+	if (!irq_number) {
+		/*
+		 * PHY doesn't have an IRQ pin (RTL8201, DP83847, AC101L),
+		 * or board does not have it connected.
+		 */
+		check_timer.expires = jiffies + LINK_POLL_INTERVAL;
+		add_timer(&check_timer);
 		return;
+	}
 
-	irq_number = lp->board_data.phy_irq_pin;
 	status = request_irq(irq_number, at91ether_phy_interrupt, 0, dev->name, dev);
 	if (status) {
 		printk(KERN_ERR "at91_ether: PHY IRQ %d request failed - status %d!\n", irq_number, status);
@@ -292,12 +299,11 @@ static void disable_phyirq(struct net_device *dev)
 	unsigned int dsintr;
 	unsigned int irq_number;
 
-	if (lp->phy_type == MII_RTL8201_ID) 	/* RTL8201 does not have an interrupt */
-		return;
-	if (lp->phy_type == MII_DP83847_ID)	/* DP83847 does not have an interrupt */
-		return;
-	if (lp->phy_type == MII_AC101L_ID)	/* AC101L interrupt not supported yet */
+	irq_number = lp->board_data.phy_irq_pin;
+	if (!irq_number) {
+		del_timer_sync(&check_timer);
 		return;
+	}
 
 	spin_lock_irq(&lp->lock);
 	enable_mdi();
@@ -326,7 +332,6 @@ static void disable_phyirq(struct net_device *dev)
 	disable_mdi();
 	spin_unlock_irq(&lp->lock);
 
-	irq_number = lp->board_data.phy_irq_pin;
 	free_irq(irq_number, dev);			/* Free interrupt handler */
 }
 
@@ -355,6 +360,18 @@ static void reset_phy(struct net_device *dev)
 }
 #endif
 
+static void at91ether_check_link(unsigned long dev_id)
+{
+	struct net_device *dev = (struct net_device *) dev_id;
+
+	enable_mdi();
+	update_linkspeed(dev, 1);
+	disable_mdi();
+
+	check_timer.expires = jiffies + LINK_POLL_INTERVAL;
+	add_timer(&check_timer);
+}
+
 /* ......................... ADDRESS MANAGEMENT ........................ */
 
 /*
@@ -501,7 +518,7 @@ static int hash_get_index(__u8 *addr)
 		hash_index |= (bitval << j);
 	}
 
-        return hash_index;
+	return hash_index;
 }
 
 /*
@@ -557,10 +574,8 @@ static void at91ether_set_rx_mode(struct net_device *dev)
 	at91_emac_write(AT91_EMAC_CFG, cfg);
 }
 
-
 /* ......................... ETHTOOL SUPPORT ........................... */
 
-
 static int mdio_read(struct net_device *dev, int phy_id, int location)
 {
 	unsigned int value;
@@ -642,6 +657,22 @@ static struct ethtool_ops at91ether_ethtool_ops = {
 	.get_link	= ethtool_op_get_link,
 };
 
+static int at91ether_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+	struct at91_private *lp = (struct at91_private *) dev->priv;
+	int res;
+
+	if (!netif_running(dev))
+		return -EINVAL;
+
+	spin_lock_irq(&lp->lock);
+	enable_mdi();
+	res = generic_mii_ioctl(&lp->mii, if_mii(rq), cmd, NULL);
+	disable_mdi();
+	spin_unlock_irq(&lp->lock);
+
+	return res;
+}
 
 /* ................................ MAC ................................ */
 
@@ -685,10 +716,10 @@ static int at91ether_open(struct net_device *dev)
 	struct at91_private *lp = (struct at91_private *) dev->priv;
 	unsigned long ctl;
 
-        if (!is_valid_ether_addr(dev->dev_addr))
-        	return -EADDRNOTAVAIL;
+	if (!is_valid_ether_addr(dev->dev_addr))
+		return -EADDRNOTAVAIL;
 
-	clk_enable(ether_clk);			/* Re-enable Peripheral clock */
+	clk_enable(lp->ether_clk);		/* Re-enable Peripheral clock */
 
 	/* Clear internal statistics */
 	ctl = at91_emac_read(AT91_EMAC_CTL);
@@ -708,7 +739,7 @@ static int at91ether_open(struct net_device *dev)
 	/* Determine current link speed */
 	spin_lock_irq(&lp->lock);
 	enable_mdi();
-	update_linkspeed(dev);
+	update_linkspeed(dev, 0);
 	disable_mdi();
 	spin_unlock_irq(&lp->lock);
 
@@ -722,6 +753,7 @@ static int at91ether_open(struct net_device *dev)
  */
 static int at91ether_close(struct net_device *dev)
 {
+	struct at91_private *lp = (struct at91_private *) dev->priv;
 	unsigned long ctl;
 
 	/* Disable Receiver and Transmitter */
@@ -738,7 +770,7 @@ static int at91ether_close(struct net_device *dev)
 
 	netif_stop_queue(dev);
 
-	clk_disable(ether_clk);			/* Disable Peripheral clock */
+	clk_disable(lp->ether_clk);		/* Disable Peripheral clock */
 
 	return 0;
 }
@@ -870,7 +902,7 @@ static irqreturn_t at91ether_interrupt(int irq, void *dev_id, struct pt_regs *re
 	if (intstatus & AT91_EMAC_RCOM)		/* Receive complete */
 		at91ether_rx(dev);
 
-	if (intstatus & AT91_EMAC_TCOM) {		/* Transmit complete */
+	if (intstatus & AT91_EMAC_TCOM) {	/* Transmit complete */
 		/* The TCOM bit is set even if the transmission failed. */
 		if (intstatus & (AT91_EMAC_TUND | AT91_EMAC_RTRY))
 			lp->stats.tx_errors += 1;
@@ -899,7 +931,8 @@ static irqreturn_t at91ether_interrupt(int irq, void *dev_id, struct pt_regs *re
 /*
  * Initialize the ethernet interface
  */
-static int __init at91ether_setup(unsigned long phy_type, unsigned short phy_address, struct platform_device *pdev)
+static int __init at91ether_setup(unsigned long phy_type, unsigned short phy_address,
+			struct platform_device *pdev, struct clk *ether_clk)
 {
 	struct at91_eth_data *board_data = pdev->dev.platform_data;
 	struct net_device *dev;
@@ -933,6 +966,7 @@ static int __init at91ether_setup(unsigned long phy_type, unsigned short phy_add
 		return -ENOMEM;
 	}
 	lp->board_data = *board_data;
+	lp->ether_clk = ether_clk;
 	platform_set_drvdata(pdev, dev);
 
 	spin_lock_init(&lp->lock);
@@ -945,6 +979,7 @@ static int __init at91ether_setup(unsigned long phy_type, unsigned short phy_add
 	dev->set_multicast_list = at91ether_set_rx_mode;
 	dev->set_mac_address = set_mac_address;
 	dev->ethtool_ops = &at91ether_ethtool_ops;
+	dev->do_ioctl = at91ether_ioctl;
 
 	SET_NETDEV_DEV(dev, &pdev->dev);
 
@@ -975,6 +1010,9 @@ static int __init at91ether_setup(unsigned long phy_type, unsigned short phy_add
 	lp->mii.dev = dev;		/* Support for ethtool */
 	lp->mii.mdio_read = mdio_read;
 	lp->mii.mdio_write = mdio_write;
+	lp->mii.phy_id = phy_address;
+	lp->mii.phy_id_mask = 0x1f;
+	lp->mii.reg_num_mask = 0x1f;
 
 	lp->phy_type = phy_type;	/* Type of PHY connected */
 	lp->phy_address = phy_address;	/* MDI address of PHY */
@@ -992,11 +1030,18 @@ static int __init at91ether_setup(unsigned long phy_type, unsigned short phy_add
 	/* Determine current link speed */
 	spin_lock_irq(&lp->lock);
 	enable_mdi();
-	update_linkspeed(dev);
+	update_linkspeed(dev, 0);
 	disable_mdi();
 	spin_unlock_irq(&lp->lock);
 	netif_carrier_off(dev);		/* will be enabled in open() */
 
+	/* If board has no PHY IRQ, use a timer to poll the PHY */
+	if (!lp->board_data.phy_irq_pin) {
+		init_timer(&check_timer);
+		check_timer.data = (unsigned long)dev;
+		check_timer.function = at91ether_check_link;
+	}
+
 	/* Display ethernet banner */
 	printk(KERN_INFO "%s: AT91 ethernet at 0x%08x int=%d %s%s (%02x:%02x:%02x:%02x:%02x:%02x)\n",
 		dev->name, (uint) dev->base_addr, dev->irq,
@@ -1005,7 +1050,7 @@ static int __init at91ether_setup(unsigned long phy_type, unsigned short phy_add
 		dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
 		dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]);
 	if ((phy_type == MII_DM9161_ID) || (lp->phy_type == MII_DM9161A_ID))
-		printk(KERN_INFO "%s: Davicom 9196 PHY %s\n", dev->name, (lp->phy_media == PORT_FIBRE) ? "(Fiber)" : "(Copper)");
+		printk(KERN_INFO "%s: Davicom 9161 PHY %s\n", dev->name, (lp->phy_media == PORT_FIBRE) ? "(Fiber)" : "(Copper)");
 	else if (phy_type == MII_LXT971A_ID)
 		printk(KERN_INFO "%s: Intel LXT971A PHY\n", dev->name);
 	else if (phy_type == MII_RTL8201_ID)
@@ -1031,9 +1076,10 @@ static int __init at91ether_probe(struct platform_device *pdev)
 	int detected = -1;
 	unsigned long phy_id;
 	unsigned short phy_address = 0;
+	struct clk *ether_clk;
 
 	ether_clk = clk_get(&pdev->dev, "ether_clk");
-	if (!ether_clk) {
+	if (IS_ERR(ether_clk)) {
 		printk(KERN_ERR "at91_ether: no clock defined\n");
 		return -ENODEV;
 	}
@@ -1056,7 +1102,7 @@ static int __init at91ether_probe(struct platform_device *pdev)
 			case MII_DP83847_ID:		/* National Semiconductor DP83847:  */
 			case MII_AC101L_ID:		/* Altima AC101L: PHY_ID1 = 0x22, PHY_ID2 = 0x5520 */
 			case MII_KS8721_ID:		/* Micrel KS8721: PHY_ID1 = 0x22, PHY_ID2 = 0x1610 */
-				detected = at91ether_setup(phy_id, phy_address, pdev);
+				detected = at91ether_setup(phy_id, phy_address, pdev, ether_clk);
 				break;
 		}
 
@@ -1075,17 +1121,61 @@ static int __devexit at91ether_remove(struct platform_device *pdev)
 	unregister_netdev(at91_dev);
 	free_irq(at91_dev->irq, at91_dev);
 	dma_free_coherent(NULL, sizeof(struct recv_desc_bufs), lp->dlist, (dma_addr_t)lp->dlist_phys);
-	clk_put(ether_clk);
+	clk_put(lp->ether_clk);
 
 	free_netdev(at91_dev);
 	at91_dev = NULL;
 	return 0;
 }
 
+#ifdef CONFIG_PM
+
+static int at91ether_suspend(struct platform_device *pdev, pm_message_t mesg)
+{
+	struct at91_private *lp = (struct at91_private *) at91_dev->priv;
+	struct net_device *net_dev = platform_get_drvdata(pdev);
+	int phy_irq = lp->board_data.phy_irq_pin;
+
+	if (netif_running(net_dev)) {
+		if (phy_irq)
+			disable_irq(phy_irq);
+
+		netif_stop_queue(net_dev);
+		netif_device_detach(net_dev);
+
+		clk_disable(lp->ether_clk);
+	}
+	return 0;
+}
+
+static int at91ether_resume(struct platform_device *pdev)
+{
+	struct at91_private *lp = (struct at91_private *) at91_dev->priv;
+	struct net_device *net_dev = platform_get_drvdata(pdev);
+	int phy_irq = lp->board_data.phy_irq_pin;
+
+	if (netif_running(net_dev)) {
+		clk_enable(lp->ether_clk);
+
+		netif_device_attach(net_dev);
+		netif_start_queue(net_dev);
+
+		if (phy_irq)
+			enable_irq(phy_irq);
+	}
+	return 0;
+}
+
+#else
+#define at91ether_suspend	NULL
+#define at91ether_resume	NULL
+#endif
+
 static struct platform_driver at91ether_driver = {
 	.probe		= at91ether_probe,
 	.remove		= __devexit_p(at91ether_remove),
-	/* FIXME:  support suspend and resume */
+	.suspend	= at91ether_suspend,
+	.resume		= at91ether_resume,
 	.driver		= {
 		.name	= DRV_NAME,
 		.owner	= THIS_MODULE,
diff --git a/drivers/net/arm/at91_ether.h b/drivers/net/arm/at91_ether.h
index 9885735c9c8..d1e72e02be3 100644
--- a/drivers/net/arm/at91_ether.h
+++ b/drivers/net/arm/at91_ether.h
@@ -80,6 +80,7 @@ struct at91_private
 	struct net_device_stats stats;
 	struct mii_if_info mii;			/* ethtool support */
 	struct at91_eth_data board_data;	/* board-specific configuration */
+	struct clk *ether_clk;			/* clock */
 
 	/* PHY */
 	unsigned long phy_type;			/* type of PHY (PHY_ID) */
diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index d8233e0b789..a7e4ba5a580 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -29,8 +29,8 @@
 
 #define DRV_MODULE_NAME		"b44"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"1.00"
-#define DRV_MODULE_RELDATE	"Apr 7, 2006"
+#define DRV_MODULE_VERSION	"1.01"
+#define DRV_MODULE_RELDATE	"Jun 16, 2006"
 
 #define B44_DEF_MSG_ENABLE	  \
 	(NETIF_MSG_DRV		| \
@@ -75,6 +75,15 @@
 /* minimum number of free TX descriptors required to wake up TX process */
 #define B44_TX_WAKEUP_THRESH		(B44_TX_RING_SIZE / 4)
 
+/* b44 internal pattern match filter info */
+#define B44_PATTERN_BASE	0x400
+#define B44_PATTERN_SIZE	0x80
+#define B44_PMASK_BASE		0x600
+#define B44_PMASK_SIZE		0x10
+#define B44_MAX_PATTERNS	16
+#define B44_ETHIPV6UDP_HLEN	62
+#define B44_ETHIPV4UDP_HLEN	42
+
 static char version[] __devinitdata =
 	DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
 
@@ -101,7 +110,7 @@ MODULE_DEVICE_TABLE(pci, b44_pci_tbl);
 
 static void b44_halt(struct b44 *);
 static void b44_init_rings(struct b44 *);
-static void b44_init_hw(struct b44 *);
+static void b44_init_hw(struct b44 *, int);
 
 static int dma_desc_align_mask;
 static int dma_desc_sync_size;
@@ -873,7 +882,7 @@ static int b44_poll(struct net_device *netdev, int *budget)
 		spin_lock_irq(&bp->lock);
 		b44_halt(bp);
 		b44_init_rings(bp);
-		b44_init_hw(bp);
+		b44_init_hw(bp, 1);
 		netif_wake_queue(bp->dev);
 		spin_unlock_irq(&bp->lock);
 		done = 1;
@@ -942,7 +951,7 @@ static void b44_tx_timeout(struct net_device *dev)
 
 	b44_halt(bp);</