Merge branch 'for-next' of git://git.o-hand.com/linux-mfd

* 'for-next' of git://git.o-hand.com/linux-mfd: (30 commits)
  mfd: Fix section mismatch in da903x
  mfd: move drivers/i2c/chips/menelaus.c to drivers/mfd
  mfd: move drivers/i2c/chips/tps65010.c to drivers/mfd
  mfd: dm355evm msp430 driver
  mfd: Add missing break from wm3850-core
  mfd: Add WM8351 support
  mfd: Support configurable numbers of DCDCs and ISINKs on WM8350
  mfd: Handle missing WM8350 platform data
  mfd: Add WM8352 support
  mfd: Use irq_to_desc in twl4030 code
  power_supply: Add Dialog DA9030 battery charger driver
  mfd: Dialog DA9030 battery charger MFD driver
  mfd: Register WM8400 codec device
  mfd: Pass driver_data onto child devices
  mfd: Fix twl4030-core.c build error
  mfd: twl4030 regulator bug fixes
  mfd: twl4030: create some regulator devices
  mfd: twl4030: cleanup symbols and OMAP dependency
  mfd: twl4030: simplified child creation code
  power_supply: Add battery health reporting for WM8350
  ...

29 files changed, 4546 insertions, 343 deletions

diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index 4c35702830c..864ac561fdb 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -126,19 +126,6 @@ config ISP1301_OMAP
 	  This driver can also be built as a module.  If so, the module
 	  will be called isp1301_omap.
 
-config TPS65010
-	tristate "TPS6501x Power Management chips"
-	depends on GPIOLIB
-	default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
-	help
-	  If you say yes here you get support for the TPS6501x series of
-	  Power Management chips.  These include voltage regulators,
-	  lithium ion/polymer battery charging, and other features that
-	  are often used in portable devices like cell phones and cameras.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called tps65010.
-
 config SENSORS_MAX6875
 	tristate "Maxim MAX6875 Power supply supervisor"
 	depends on EXPERIMENTAL
@@ -164,16 +151,6 @@ config SENSORS_TSL2550
 	  This driver can also be built as a module.  If so, the module
 	  will be called tsl2550.
 
-config MENELAUS
-	bool "TWL92330/Menelaus PM chip"
-	depends on I2C=y && ARCH_OMAP24XX
-	help
-	  If you say yes here you get support for the Texas Instruments
-	  TWL92330/Menelaus Power Management chip. This include voltage
-	  regulators, Dual slot memory card tranceivers, real-time clock
-	  and other features that are often used in portable devices like
-	  cell phones and PDAs.
-
 config MCU_MPC8349EMITX
 	tristate "MPC8349E-mITX MCU driver"
 	depends on I2C && PPC_83xx
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index 23d2a31b0a6..8b95f41a500 100644
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -19,8 +19,6 @@ obj-$(CONFIG_SENSORS_PCF8574)	+= pcf8574.o
 obj-$(CONFIG_PCF8575)		+= pcf8575.o
 obj-$(CONFIG_SENSORS_PCF8591)	+= pcf8591.o
 obj-$(CONFIG_ISP1301_OMAP)	+= isp1301_omap.o
-obj-$(CONFIG_TPS65010)		+= tps65010.o
-obj-$(CONFIG_MENELAUS)		+= menelaus.o
 obj-$(CONFIG_SENSORS_TSL2550)	+= tsl2550.o
 obj-$(CONFIG_MCU_MPC8349EMITX)	+= mcu_mpc8349emitx.o
 
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 257277394f8..416f9e7286b 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -34,6 +34,14 @@ config MFD_ASIC3
 	  This driver supports the ASIC3 multifunction chip found on many
 	  PDAs (mainly iPAQ and HTC based ones)
 
+config MFD_DM355EVM_MSP
+	bool "DaVinci DM355 EVM microcontroller"
+	depends on I2C && MACH_DAVINCI_DM355_EVM
+	help
+	  This driver supports the MSP430 microcontroller used on these
+	  boards.  MSP430 firmware manages resets and power sequencing,
+	  inputs from buttons and the IR remote, LEDs, an RTC, and more.
+
 config HTC_EGPIO
 	bool "HTC EGPIO support"
 	depends on GENERIC_HARDIRQS && GPIOLIB && ARM
@@ -61,9 +69,32 @@ config UCB1400_CORE
 	  To compile this driver as a module, choose M here: the
 	  module will be called ucb1400_core.
 
+config TPS65010
+	tristate "TPS6501x Power Management chips"
+	depends on I2C && GPIOLIB
+	default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
+	help
+	  If you say yes here you get support for the TPS6501x series of
+	  Power Management chips.  These include voltage regulators,
+	  lithium ion/polymer battery charging, and other features that
+	  are often used in portable devices like cell phones and cameras.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called tps65010.
+
+config MENELAUS
+	bool "Texas Instruments TWL92330/Menelaus PM chip"
+	depends on I2C=y && ARCH_OMAP24XX
+	help
+	  If you say yes here you get support for the Texas Instruments
+	  TWL92330/Menelaus Power Management chip. This include voltage
+	  regulators, Dual slot memory card tranceivers, real-time clock
+	  and other features that are often used in portable devices like
+	  cell phones and PDAs.
+
 config TWL4030_CORE
 	bool "Texas Instruments TWL4030/TPS659x0 Support"
-	depends on I2C=y && GENERIC_HARDIRQS && (ARCH_OMAP2 || ARCH_OMAP3)
+	depends on I2C=y && GENERIC_HARDIRQS
 	help
 	  Say yes here if you have TWL4030 family chip on your board.
 	  This core driver provides register access and IRQ handling
@@ -116,6 +147,7 @@ config PMIC_DA903X
 
 config MFD_WM8400
 	tristate "Support Wolfson Microelectronics WM8400"
+	select MFD_CORE
 	depends on I2C
 	help
 	  Support for the Wolfson Microelecronics WM8400 PMIC and audio
@@ -142,6 +174,38 @@ config MFD_WM8350_CONFIG_MODE_3
 	bool
 	depends on MFD_WM8350
 
+config MFD_WM8351_CONFIG_MODE_0
+	bool
+	depends on MFD_WM8350
+
+config MFD_WM8351_CONFIG_MODE_1
+	bool
+	depends on MFD_WM8350
+
+config MFD_WM8351_CONFIG_MODE_2
+	bool
+	depends on MFD_WM8350
+
+config MFD_WM8351_CONFIG_MODE_3
+	bool
+	depends on MFD_WM8350
+
+config MFD_WM8352_CONFIG_MODE_0
+	bool
+	depends on MFD_WM8350
+
+config MFD_WM8352_CONFIG_MODE_1
+	bool
+	depends on MFD_WM8350
+
+config MFD_WM8352_CONFIG_MODE_2
+	bool
+	depends on MFD_WM8350
+
+config MFD_WM8352_CONFIG_MODE_3
+	bool
+	depends on MFD_WM8350
+
 config MFD_WM8350_I2C
 	tristate "Support Wolfson Microelectronics WM8350 with I2C"
 	select MFD_WM8350
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 9a5ad8af911..0c9418b36c2 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -8,6 +8,8 @@ obj-$(CONFIG_MFD_ASIC3)		+= asic3.o
 obj-$(CONFIG_HTC_EGPIO)		+= htc-egpio.o
 obj-$(CONFIG_HTC_PASIC3)	+= htc-pasic3.o
 
+obj-$(CONFIG_MFD_DM355EVM_MSP)	+= dm355evm_msp.o
+
 obj-$(CONFIG_MFD_T7L66XB)	+= t7l66xb.o
 obj-$(CONFIG_MFD_TC6387XB)	+= tc6387xb.o
 obj-$(CONFIG_MFD_TC6393XB)	+= tc6393xb.o
@@ -17,6 +19,9 @@ wm8350-objs			:= wm8350-core.o wm8350-regmap.o wm8350-gpio.o
 obj-$(CONFIG_MFD_WM8350)	+= wm8350.o
 obj-$(CONFIG_MFD_WM8350_I2C)	+= wm8350-i2c.o
 
+obj-$(CONFIG_TPS65010)		+= tps65010.o
+obj-$(CONFIG_MENELAUS)		+= menelaus.o
+
 obj-$(CONFIG_TWL4030_CORE)	+= twl4030-core.o twl4030-irq.o
 
 obj-$(CONFIG_MFD_CORE)		+= mfd-core.o
@@ -31,4 +36,4 @@ obj-$(CONFIG_MCP_UCB1200)	+= ucb1x00-assabet.o
 endif
 obj-$(CONFIG_UCB1400_CORE)	+= ucb1400_core.o
 
-obj-$(CONFIG_PMIC_DA903X)	+= da903x.o
\ No newline at end of file
+obj-$(CONFIG_PMIC_DA903X)	+= da903x.o
diff --git a/drivers/mfd/da903x.c b/drivers/mfd/da903x.c
index 0b5bd85dfce..99f8dcfe3d9 100644
--- a/drivers/mfd/da903x.c
+++ b/drivers/mfd/da903x.c
@@ -151,12 +151,24 @@ int da903x_write(struct device *dev, int reg, uint8_t val)
 }
 EXPORT_SYMBOL_GPL(da903x_write);
 
+int da903x_writes(struct device *dev, int reg, int len, uint8_t *val)
+{
+	return __da903x_writes(to_i2c_client(dev), reg, len, val);
+}
+EXPORT_SYMBOL_GPL(da903x_writes);
+
 int da903x_read(struct device *dev, int reg, uint8_t *val)
 {
 	return __da903x_read(to_i2c_client(dev), reg, val);
 }
 EXPORT_SYMBOL_GPL(da903x_read);
 
+int da903x_reads(struct device *dev, int reg, int len, uint8_t *val)
+{
+	return __da903x_reads(to_i2c_client(dev), reg, len, val);
+}
+EXPORT_SYMBOL_GPL(da903x_reads);
+
 int da903x_set_bits(struct device *dev, int reg, uint8_t bit_mask)
 {
 	struct da903x_chip *chip = dev_get_drvdata(dev);
@@ -435,13 +447,13 @@ static const struct i2c_device_id da903x_id_table[] = {
 };
 MODULE_DEVICE_TABLE(i2c, da903x_id_table);
 
-static int __devexit __remove_subdev(struct device *dev, void *unused)
+static int __remove_subdev(struct device *dev, void *unused)
 {
 	platform_device_unregister(to_platform_device(dev));
 	return 0;
 }
 
-static int __devexit da903x_remove_subdevs(struct da903x_chip *chip)
+static int da903x_remove_subdevs(struct da903x_chip *chip)
 {
 	return device_for_each_child(chip->dev, NULL, __remove_subdev);
 }
diff --git a/drivers/mfd/dm355evm_msp.c b/drivers/mfd/dm355evm_msp.c
new file mode 100644
index 00000000000..4214b3f7242
--- /dev/null
+++ b/drivers/mfd/dm355evm_msp.c
@@ -0,0 +1,420 @@
+/*
+ * dm355evm_msp.c - driver for MSP430 firmware on DM355EVM board
+ *
+ * Copyright (C) 2008 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/i2c.h>
+#include <linux/i2c/dm355evm_msp.h>
+
+
+/*
+ * The DM355 is a DaVinci chip with video support but no C64+ DSP.  Its
+ * EVM board has an MSP430 programmed with firmware for various board
+ * support functions.  This driver exposes some of them directly, and
+ * supports other drivers (e.g. RTC, input) for more complex access.
+ *
+ * Because this firmware is entirely board-specific, this file embeds
+ * knowledge that would be passed as platform_data in a generic driver.
+ *
+ * This driver was tested with firmware revision A4.
+ */
+
+#if defined(CONFIG_KEYBOARD_DM355EVM) \
+		|| defined(CONFIG_KEYBOARD_DM355EVM_MODULE)
+#define msp_has_keyboard()	true
+#else
+#define msp_has_keyboard()	false
+#endif
+
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+#define msp_has_leds()		true
+#else
+#define msp_has_leds()		false
+#endif
+
+#if defined(CONFIG_RTC_DRV_DM355EVM) || defined(CONFIG_RTC_DRV_DM355EVM_MODULE)
+#define msp_has_rtc()		true
+#else
+#define msp_has_rtc()		false
+#endif
+
+#if defined(CONFIG_VIDEO_TVP514X) || defined(CONFIG_VIDEO_TVP514X_MODULE)
+#define msp_has_tvp()		true
+#else
+#define msp_has_tvp()		false
+#endif
+
+
+/*----------------------------------------------------------------------*/
+
+/* REVISIT for paranoia's sake, retry reads/writes on error */
+
+static struct i2c_client *msp430;
+
+/**
+ * dm355evm_msp_write - Writes a register in dm355evm_msp
+ * @value: the value to be written
+ * @reg: register address
+ *
+ * Returns result of operation - 0 is success, else negative errno
+ */
+int dm355evm_msp_write(u8 value, u8 reg)
+{
+	return i2c_smbus_write_byte_data(msp430, reg, value);
+}
+EXPORT_SYMBOL(dm355evm_msp_write);
+
+/**
+ * dm355evm_msp_read - Reads a register from dm355evm_msp
+ * @reg: register address
+ *
+ * Returns result of operation - value, or negative errno
+ */
+int dm355evm_msp_read(u8 reg)
+{
+	return i2c_smbus_read_byte_data(msp430, reg);
+}
+EXPORT_SYMBOL(dm355evm_msp_read);
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Many of the msp430 pins are just used as fixed-direction GPIOs.
+ * We could export a few more of them this way, if we wanted.
+ */
+#define MSP_GPIO(bit,reg)	((DM355EVM_MSP_ ## reg) << 3 | (bit))
+
+static const u8 msp_gpios[] = {
+	/* eight leds */
+	MSP_GPIO(0, LED), MSP_GPIO(1, LED),
+	MSP_GPIO(2, LED), MSP_GPIO(3, LED),
+	MSP_GPIO(4, LED), MSP_GPIO(5, LED),
+	MSP_GPIO(6, LED), MSP_GPIO(7, LED),
+	/* SW6 and the NTSC/nPAL jumper */
+	MSP_GPIO(0, SWITCH1), MSP_GPIO(1, SWITCH1),
+	MSP_GPIO(2, SWITCH1), MSP_GPIO(3, SWITCH1),
+	MSP_GPIO(4, SWITCH1),
+};
+
+#define MSP_GPIO_REG(offset)	(msp_gpios[(offset)] >> 3)
+#define MSP_GPIO_MASK(offset)	BIT(msp_gpios[(offset)] & 0x07)
+
+static int msp_gpio_in(struct gpio_chip *chip, unsigned offset)
+{
+	switch (MSP_GPIO_REG(offset)) {
+	case DM355EVM_MSP_SWITCH1:
+	case DM355EVM_MSP_SWITCH2:
+	case DM355EVM_MSP_SDMMC:
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+static u8 msp_led_cache;
+
+static int msp_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	int reg, status;
+
+	reg = MSP_GPIO_REG(offset);
+	status = dm355evm_msp_read(reg);
+	if (status < 0)
+		return status;
+	if (reg == DM355EVM_MSP_LED)
+		msp_led_cache = status;
+	return status & MSP_GPIO_MASK(offset);
+}
+
+static int msp_gpio_out(struct gpio_chip *chip, unsigned offset, int value)
+{
+	int mask, bits;
+
+	/* NOTE:  there are some other signals that could be
+	 * packaged as output GPIOs, but they aren't as useful
+	 * as the LEDs ... so for now we don't.
+	 */
+	if (MSP_GPIO_REG(offset) != DM355EVM_MSP_LED)
+		return -EINVAL;
+
+	mask = MSP_GPIO_MASK(offset);
+	bits = msp_led_cache;
+
+	bits &= ~mask;
+	if (value)
+		bits |= mask;
+	msp_led_cache = bits;
+
+	return dm355evm_msp_write(bits, DM355EVM_MSP_LED);
+}
+
+static void msp_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	msp_gpio_out(chip, offset, value);
+}
+
+static struct gpio_chip dm355evm_msp_gpio = {
+	.label			= "dm355evm_msp",
+	.owner			= THIS_MODULE,
+	.direction_input	= msp_gpio_in,
+	.get			= msp_gpio_get,
+	.direction_output	= msp_gpio_out,
+	.set			= msp_gpio_set,
+	.base			= -EINVAL,		/* dynamic assignment */
+	.ngpio			= ARRAY_SIZE(msp_gpios),
+	.can_sleep		= true,
+};
+
+/*----------------------------------------------------------------------*/
+
+static struct device *add_child(struct i2c_client *client, const char *name,
+		void *pdata, unsigned pdata_len,
+		bool can_wakeup, int irq)
+{
+	struct platform_device	*pdev;
+	int			status;
+
+	pdev = platform_device_alloc(name, -1);
+	if (!pdev) {
+		dev_dbg(&client->dev, "can't alloc dev\n");
+		status = -ENOMEM;
+		goto err;
+	}
+
+	device_init_wakeup(&pdev->dev, can_wakeup);
+	pdev->dev.parent = &client->dev;
+
+	if (pdata) {
+		status = platform_device_add_data(pdev, pdata, pdata_len);
+		if (status < 0) {
+			dev_dbg(&pdev->dev, "can't add platform_data\n");
+			goto err;
+		}
+	}
+
+	if (irq) {
+		struct resource r = {
+			.start = irq,
+			.flags = IORESOURCE_IRQ,
+		};
+
+		status = platform_device_add_resources(pdev, &r, 1);
+		if (status < 0) {
+			dev_dbg(&pdev->dev, "can't add irq\n");
+			goto err;
+		}
+	}
+
+	status = platform_device_add(pdev);
+
+err:
+	if (status < 0) {
+		platform_device_put(pdev);
+		dev_err(&client->dev, "can't add %s dev\n", name);
+		return ERR_PTR(status);
+	}
+	return &pdev->dev;
+}
+
+static int add_children(struct i2c_client *client)
+{
+	static const struct {
+		int offset;
+		char *label;
+	} config_inputs[] = {
+		/* 8 == right after the LEDs */
+		{ 8 + 0, "sw6_1", },
+		{ 8 + 1, "sw6_2", },
+		{ 8 + 2, "sw6_3", },
+		{ 8 + 3, "sw6_4", },
+		{ 8 + 4, "NTSC/nPAL", },
+	};
+
+	struct device	*child;
+	int		status;
+	int		i;
+
+	/* GPIO-ish stuff */
+	dm355evm_msp_gpio.dev = &client->dev;
+	status = gpiochip_add(&dm355evm_msp_gpio);
+	if (status < 0)
+		return status;
+
+	/* LED output */
+	if (msp_has_leds()) {
+#define GPIO_LED(l)	.name = l, .active_low = true
+		static struct gpio_led evm_leds[] = {
+			{ GPIO_LED("dm355evm::ds14"),
+				.default_trigger = "heartbeat", },
+			{ GPIO_LED("dm355evm::ds15"),
+				.default_trigger = "mmc0", },
+			{ GPIO_LED("dm355evm::ds16"),
+				/* could also be a CE-ATA drive */
+				.default_trigger = "mmc1", },
+			{ GPIO_LED("dm355evm::ds17"),
+				.default_trigger = "nand-disk", },
+			{ GPIO_LED("dm355evm::ds18"), },
+			{ GPIO_LED("dm355evm::ds19"), },
+			{ GPIO_LED("dm355evm::ds20"), },
+			{ GPIO_LED("dm355evm::ds21"), },
+		};
+#undef GPIO_LED
+
+		struct gpio_led_platform_data evm_led_data = {
+			.num_leds	= ARRAY_SIZE(evm_leds),
+			.leds		= evm_leds,
+		};
+
+		for (i = 0; i < ARRAY_SIZE(evm_leds); i++)
+			evm_leds[i].gpio = i + dm355evm_msp_gpio.base;
+
+		/* NOTE:  these are the only fully programmable LEDs
+		 * on the board, since GPIO-61/ds22 (and many signals
+		 * going to DC7) must be used for AEMIF address lines
+		 * unless the top 1 GB of NAND is unused...
+		 */
+		child = add_child(client, "leds-gpio",
+				&evm_led_data, sizeof(evm_led_data),
+				false, 0);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
+	}
+
+	/* configuration inputs */
+	for (i = 0; i < ARRAY_SIZE(config_inputs); i++) {
+		int gpio = dm355evm_msp_gpio.base + config_inputs[i].offset;
+
+		gpio_request(gpio, config_inputs[i].label);
+		gpio_direction_input(gpio);
+
+		/* make it easy for userspace to see these */
+		gpio_export(gpio, false);
+	}
+
+	/* RTC is a 32 bit counter, no alarm */
+	if (msp_has_rtc()) {
+		child = add_child(client, "rtc-dm355evm",
+				NULL, 0, false, 0);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
+	}
+
+	/* input from buttons and IR remote (uses the IRQ) */
+	if (msp_has_keyboard()) {
+		child = add_child(client, "dm355evm_keys",
+				NULL, 0, true, client->irq);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
+	}
+
+	return 0;
+}
+
+/*----------------------------------------------------------------------*/
+
+static void dm355evm_command(unsigned command)
+{
+	int status;
+
+	status = dm355evm_msp_write(command, DM355EVM_MSP_COMMAND);
+	if (status < 0)
+		dev_err(&msp430->dev, "command %d failure %d\n",
+				command, status);
+}
+
+static void dm355evm_power_off(void)
+{
+	dm355evm_command(MSP_COMMAND_POWEROFF);
+}
+
+static int dm355evm_msp_remove(struct i2c_client *client)
+{
+	pm_power_off = NULL;
+	msp430 = NULL;
+	return 0;
+}
+
+static int
+dm355evm_msp_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+	int		status;
+	const char	*video = msp_has_tvp() ? "TVP5146" : "imager";
+
+	if (msp430)
+		return -EBUSY;
+	msp430 = client;
+
+	/* display revision status; doubles as sanity check */
+	status = dm355evm_msp_read(DM355EVM_MSP_FIRMREV);
+	if (status < 0)
+		goto fail;
+	dev_info(&client->dev, "firmware v.%02X, %s as video-in\n",
+			status, video);
+
+	/* mux video input:  either tvp5146 or some external imager */
+	status = dm355evm_msp_write(msp_has_tvp() ? 0 : MSP_VIDEO_IMAGER,
+			DM355EVM_MSP_VIDEO_IN);
+	if (status < 0)
+		dev_warn(&client->dev, "error %d muxing %s as video-in\n",
+			status, video);
+
+	/* init LED cache, and turn off the LEDs */
+	msp_led_cache = 0xff;
+	dm355evm_msp_write(msp_led_cache, DM355EVM_MSP_LED);
+
+	/* export capabilities we support */
+	status = add_children(client);
+	if (status < 0)
+		goto fail;
+
+	/* PM hookup */
+	pm_power_off = dm355evm_power_off;
+
+	return 0;
+
+fail:
+	/* FIXME remove children ... */
+	dm355evm_msp_remove(client);
+	return status;
+}
+
+static const struct i2c_device_id dm355evm_msp_ids[] = {
+	{ "dm355evm_msp", 0 },
+	{ /* end of list */ },
+};
+MODULE_DEVICE_TABLE(i2c, dm355evm_msp_ids);
+
+static struct i2c_driver dm355evm_msp_driver = {
+	.driver.name	= "dm355evm_msp",
+	.id_table	= dm355evm_msp_ids,
+	.probe		= dm355evm_msp_probe,
+	.remove		= dm355evm_msp_remove,
+};
+
+static int __init dm355evm_msp_init(void)
+{
+	return i2c_add_driver(&dm355evm_msp_driver);
+}
+subsys_initcall(dm355evm_msp_init);
+
+static void __exit dm355evm_msp_exit(void)
+{
+	i2c_del_driver(&dm355evm_msp_driver);
+}
+module_exit(dm355evm_msp_exit);
+
+MODULE_DESCRIPTION("Interface to MSP430 firmware on DM355EVM");
+MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/chips/menelaus.c b/drivers/mfd/menelaus.c
index 4b364bae6b3..4b364bae6b3 100644
--- a/drivers/i2c/chips/menelaus.c
+++ b/drivers/mfd/menelaus.c
diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c
index 6c0d1bec4b7..54ddf3772e0 100644
--- a/drivers/mfd/mfd-core.c
+++ b/drivers/mfd/mfd-core.c
@@ -34,6 +34,7 @@ static int mfd_add_device(struct device *parent, int id,
 		goto fail_device;
 
 	pdev->dev.parent = parent;
+	platform_set_drvdata(pdev, cell->driver_data);
 
 	ret = platform_device_add_data(pdev,
 			cell->platform_data, cell->data_size);
diff --git a/drivers/i2c/chips/tps65010.c b/drivers/mfd/tps65010.c
index acf8b9d5f57..acf8b9d5f57 100644
--- a/drivers/i2c/chips/tps65010.c
+++ b/drivers/mfd/tps65010.c
diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c
index dd843c4fbcc..b59c385cbc1 100644
--- a/drivers/mfd/twl4030-core.c
+++ b/drivers/mfd/twl4030-core.c
@@ -33,6 +33,8 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 
+#include <linux/regulator/machine.h>
+
 #include <linux/i2c.h>
 #include <linux/i2c/twl4030.h>
 
@@ -71,6 +73,13 @@
 #define twl_has_gpio()	false
 #endif
 
+#if defined(CONFIG_REGULATOR_TWL4030) \
+	|| defined(CONFIG_REGULATOR_TWL4030_MODULE)
+#define twl_has_regulator()	true
+#else
+#define twl_has_regulator()	false
+#endif
+
 #if defined(CONFIG_TWL4030_MADC) || defined(CONFIG_TWL4030_MADC_MODULE)
 #define twl_has_madc()	true
 #else
@@ -149,6 +158,10 @@
 #define HIGH_PERF_SQ			(1 << 3)
 
 
+/* chip-specific feature flags, for i2c_device_id.driver_data */
+#define TWL4030_VAUX2		BIT(0)	/* pre-5030 voltage ranges */
+#define TPS_SUBSET		BIT(1)	/* tps659[23]0 have fewer LDOs */
+
 /*----------------------------------------------------------------------*/
 
 /* is driver active, bound to a chip? */
@@ -225,7 +238,7 @@ static struct twl4030mapping twl4030_map[TWL4030_MODULE_LAST + 1] = {
  *
  * Returns the result of operation - 0 is success
  */
-int twl4030_i2c_write(u8 mod_no, u8 *value, u8 reg, u8 num_bytes)
+int twl4030_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes)
 {
 	int ret;
 	int sid;
@@ -274,7 +287,7 @@ EXPORT_SYMBOL(twl4030_i2c_write);
  *
  * Returns result of operation - num_bytes is success else failure.
  */
-int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, u8 num_bytes)
+int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes)
 {
 	int ret;
 	u8 val;
@@ -352,258 +365,258 @@ EXPORT_SYMBOL(twl4030_i2c_read_u8);
 
 /*----------------------------------------------------------------------*/
 
-/*
- * NOTE:  We know the first 8 IRQs after pdata->base_irq are
- * for the PIH, and the next are for the PWR_INT SIH, since
- * that's how twl_init_irq() sets things up.
- */
-
-static int add_children(struct twl4030_platform_data *pdata)
+static struct device *
+add_numbered_child(unsigned chip, const char *name, int num,
+		void *pdata, unsigned pdata_len,
+		bool can_wakeup, int irq0, int irq1)
 {
-	struct platform_device	*pdev = NULL;
-	struct twl4030_client	*twl = NULL;
-	int			status = 0;
+	struct platform_device	*pdev;
+	struct twl4030_client	*twl = &twl4030_modules[chip];
+	int			status;
+
+	pdev = platform_device_alloc(name, num);
+	if (!pdev) {
+		dev_dbg(&twl->client->dev, "can't alloc dev\n");
+		status = -ENOMEM;
+		goto err;
+	}
 
-	if (twl_has_bci() && pdata->bci) {
-		twl = &twl4030_modules[3];
+	device_init_wakeup(&pdev->dev, can_wakeup);
+	pdev->dev.parent = &twl->client->dev;
 
-		pdev = platform_device_alloc("twl4030_bci", -1);
-		if (!pdev) {
-			pr_debug("%s: can't alloc bci dev\n", DRIVER_NAME);
-			status = -ENOMEM;
+	if (pdata) {
+		status = platform_device_add_data(pdev, pdata, pdata_len);
+		if (status < 0) {
+			dev_dbg(&pdev->dev, "can't add platform_data\n");
 			goto err;
 		}
+	}
 
-		if (status == 0) {
-			pdev->dev.parent = &twl->client->dev;
-			status = platform_device_add_data(pdev, pdata->bci,
-					sizeof(*pdata->bci));
-			if (status < 0) {
-				dev_dbg(&twl->client->dev,
-					"can't add bci data, %d\n",
-					status);
-				goto err;
-			}
-		}
-
-		if (status == 0) {
-			struct resource r = {
-				.start = pdata->irq_base + 8 + 1,
-				.flags = IORESOURCE_IRQ,
-			};
-
-			status = platform_device_add_resources(pdev, &r, 1);
-		}
-
-		if (status == 0)
-			status = platform_device_add(pdev);
+	if (irq0) {
+		struct resource r[2] = {
+			{ .start = irq0, .flags = IORESOURCE_IRQ, },
+			{ .start = irq1, .flags = IORESOURCE_IRQ, },
+		};
 
+		status = platform_device_add_resources(pdev, r, irq1 ? 2 : 1);
 		if (status < 0) {
-			platform_device_put(pdev);
-			dev_dbg(&twl->client->dev,
-					"can't create bci dev, %d\n",
-					status);
+			dev_dbg(&pdev->dev, "can't add irqs\n");
 			goto err;
 		}
 	}
 
-	if (twl_has_gpio() && pdata->gpio) {
-		twl = &twl4030_modules[1];
+	status = platform_device_add(pdev);
 
-		pdev = platform_device_alloc("twl4030_gpio", -1);
-		if (!pdev) {
-			pr_debug("%s: can't alloc gpio dev\n", DRIVER_NAME);
-			status = -ENOMEM;
-			goto err;
-		}
+err:
+	if (status < 0) {
+		platform_device_put(pdev);
+		dev_err(&twl->client->dev, "can't add %s dev\n", name);
+		return ERR_PTR(status);
+	}
+	return &pdev->dev;
+}
 
-		/* more driver model init */
-		if (status == 0) {
-			pdev->dev.parent = &twl->client->dev;
-			/* device_init_wakeup(&pdev->dev, 1); */
-
-			status = platform_device_add_data(pdev, pdata->gpio,
-					sizeof(*pdata->gpio));
-			if (status < 0) {
-				dev_dbg(&twl->client->dev,
-					"can't add gpio data, %d\n",
-					status);
-				goto err;
-			}
-		}
+static inline struct device *add_child(unsigned chip, const char *name,
+		void *pdata, unsigned pdata_len,
+		bool can_wakeup, int irq0, int irq1)
+{
+	return add_numbered_child(chip, name, -1, pdata, pdata_len,
+		can_wakeup, irq0, irq1);
+}
 
-		/* GPIO module IRQ */
-		if (status == 0) {
-			struct resource	r = {
-				.start = pdata->irq_base + 0,
-				.flags = IORESOURCE_IRQ,
-			};
+static struct device *
+add_regulator_linked(int num, struct regulator_init_data *pdata,
+		struct regulator_consumer_supply *consumers,
+		unsigned num_consumers)
+{
+	/* regulator framework demands init_data ... */
+	if (!pdata)
+		return NULL;
 
-			status = platform_device_add_resources(pdev, &r, 1);
-		}
+	if (consumers) {
+		pdata->consumer_supplies = consumers;
+		pdata->num_consum