aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-05-26 12:57:47 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2012-05-26 12:57:47 -0700
commit84a442b9a16ee69243ce7fce5d6f6f9c3fbdee68 (patch)
tree332a0c901d8ab2ffb19b8ce14b4b094bf5b08657
parent39b6cc668c5ecc66f6f9c9293ffab681cb6f7065 (diff)
parentdeb88cc3c69975cbd9875ed9fac259b351f6b64d (diff)
Merge tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull arm-soc device tree conversions (part 2) from Olof Johansson: "These continue the device tree work from part 1, this set is for the tegra, mxs and imx platforms, all of which have dependencies on clock or pinctrl changes submitted earlier." Fix up trivial conflicts due to nearby changes in drivers/{gpio/gpio,i2c/busses/i2c}-mxs.c * tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits) ARM: dt: tegra: invert status=disable vs status=okay ARM: dt: tegra: consistent basic property ordering ARM: dt: tegra: sort nodes based on bus order ARM: dt: tegra: remove duplicate device_type property ARM: dt: tegra: consistenly use lower-case for hex constants ARM: dt: tegra: format regs properties consistently ARM: dt: tegra: gpio comment cleanup ARM: dt: tegra: remove unnecessary unit addresses ARM: dt: tegra: whitespace cleanup ARM: dt: tegra cardhu: fix typo in SDHCI node name ARM: dt: tegra: cardhu: register core regulator tps62361 ARM: dt: tegra30.dtsi: Add SMMU node ARM: dt: tegra20.dtsi: Add GART node ARM: dt: tegra30.dtsi: Add Memory Controller(MC) nodes ARM: dt: tegra20.dtsi: Add Memory Controller(MC) nodes ARM: dt: tegra: Add device tree support for AHB ARM: dts: enable audio support for imx28-evk ARM: dts: enable i2c device for imx28-evk i2c: mxs: add device tree probe support ARM: dts: enable mmc for imx28-evk ...
-rw-r--r--Documentation/devicetree/bindings/arm/fsl.txt12
-rw-r--r--Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt19
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio-mxs.txt87
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-mxs.txt16
-rw-r--r--Documentation/devicetree/bindings/mmc/mxs-mmc.txt25
-rw-r--r--Documentation/devicetree/bindings/net/fsl-fec.txt2
-rw-r--r--Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt2
-rw-r--r--arch/arm/Kconfig1
-rw-r--r--arch/arm/Kconfig.debug8
-rw-r--r--arch/arm/boot/dts/imx23-evk.dts43
-rw-r--r--arch/arm/boot/dts/imx23.dtsi295
-rw-r--r--arch/arm/boot/dts/imx27-phytec-phycore.dts8
-rw-r--r--arch/arm/boot/dts/imx27.dtsi14
-rw-r--r--arch/arm/boot/dts/imx28-evk.dts114
-rw-r--r--arch/arm/boot/dts/imx28.dtsi497
-rw-r--r--arch/arm/boot/dts/imx51-babbage.dts40
-rw-r--r--arch/arm/boot/dts/imx51.dtsi41
-rw-r--r--arch/arm/boot/dts/imx53-ard.dts6
-rw-r--r--arch/arm/boot/dts/imx53-evk.dts8
-rw-r--r--arch/arm/boot/dts/imx53-qsb.dts121
-rw-r--r--arch/arm/boot/dts/imx53-smd.dts12
-rw-r--r--arch/arm/boot/dts/imx53.dtsi45
-rw-r--r--arch/arm/boot/dts/imx6q-arm2.dts13
-rw-r--r--arch/arm/boot/dts/imx6q-sabrelite.dts50
-rw-r--r--arch/arm/boot/dts/imx6q-sabresd.dts53
-rw-r--r--arch/arm/boot/dts/imx6q.dtsi171
-rw-r--r--arch/arm/boot/dts/tegra-cardhu.dts85
-rw-r--r--arch/arm/boot/dts/tegra-harmony.dts104
-rw-r--r--arch/arm/boot/dts/tegra-paz00.dts112
-rw-r--r--arch/arm/boot/dts/tegra-seaboard.dts213
-rw-r--r--arch/arm/boot/dts/tegra-trimslice.dts83
-rw-r--r--arch/arm/boot/dts/tegra-ventana.dts102
-rw-r--r--arch/arm/boot/dts/tegra20.dtsi275
-rw-r--r--arch/arm/boot/dts/tegra30.dtsi292
-rw-r--r--arch/arm/configs/mxs_defconfig1
-rw-r--r--arch/arm/mach-imx/Makefile.boot3
-rw-r--r--arch/arm/mach-imx/clk-imx51-imx53.c40
-rw-r--r--arch/arm/mach-imx/clk-imx6q.c35
-rw-r--r--arch/arm/mach-imx/imx53-dt.c19
-rw-r--r--arch/arm/mach-imx/lluart.c6
-rw-r--r--arch/arm/mach-imx/mach-imx6q.c55
-rw-r--r--arch/arm/mach-imx/mach-mx51_babbage.c6
-rw-r--r--arch/arm/mach-mxs/Kconfig10
-rw-r--r--arch/arm/mach-mxs/Makefile1
-rw-r--r--arch/arm/mach-mxs/devices/Kconfig1
-rw-r--r--arch/arm/mach-mxs/devices/platform-dma.c21
-rw-r--r--arch/arm/mach-mxs/devices/platform-gpio-mxs.c24
-rw-r--r--arch/arm/mach-mxs/devices/platform-mxs-mmc.c21
-rw-r--r--arch/arm/mach-mxs/include/mach/common.h7
-rw-r--r--arch/arm/mach-mxs/include/mach/devices-common.h3
-rw-r--r--arch/arm/mach-mxs/mach-mxs.c121
-rw-r--r--arch/arm/mach-mxs/mm.c16
-rw-r--r--arch/arm/plat-mxc/include/mach/debug-macro.S2
-rw-r--r--arch/arm/plat-mxc/include/mach/mx6q.h2
-rw-r--r--drivers/clk/mxs/clk-imx23.c9
-rw-r--r--drivers/clk/mxs/clk-imx28.c13
-rw-r--r--drivers/dma/Kconfig1
-rw-r--r--drivers/dma/mxs-dma.c188
-rw-r--r--drivers/gpio/gpio-mxs.c156
-rw-r--r--drivers/i2c/busses/i2c-mxs.c13
-rw-r--r--drivers/mmc/host/mxs-mmc.c197
-rw-r--r--include/linux/fsl/mxs-dma.h12
-rw-r--r--include/linux/mmc/mxs-mmc.h (renamed from arch/arm/mach-mxs/include/mach/mmc.h)7
63 files changed, 2972 insertions, 987 deletions
diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt
index bfbc771a65f..ac9e7516756 100644
--- a/Documentation/devicetree/bindings/arm/fsl.txt
+++ b/Documentation/devicetree/bindings/arm/fsl.txt
@@ -1,6 +1,14 @@
Freescale i.MX Platforms Device Tree Bindings
-----------------------------------------------
+i.MX23 Evaluation Kit
+Required root node properties:
+ - compatible = "fsl,imx23-evk", "fsl,imx23";
+
+i.MX28 Evaluation Kit
+Required root node properties:
+ - compatible = "fsl,imx28-evk", "fsl,imx28";
+
i.MX51 Babbage Board
Required root node properties:
- compatible = "fsl,imx51-babbage", "fsl,imx51";
@@ -29,6 +37,10 @@ i.MX6 Quad SABRE Lite Board
Required root node properties:
- compatible = "fsl,imx6q-sabrelite", "fsl,imx6q";
+i.MX6 Quad SABRE Smart Device Board
+Required root node properties:
+ - compatible = "fsl,imx6q-sabresd", "fsl,imx6q";
+
Generic i.MX boards
-------------------
diff --git a/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt
new file mode 100644
index 00000000000..ded0398d3bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt
@@ -0,0 +1,19 @@
+* Freescale MXS DMA
+
+Required properties:
+- compatible : Should be "fsl,<chip>-dma-apbh" or "fsl,<chip>-dma-apbx"
+- reg : Should contain registers location and length
+
+Supported chips:
+imx23, imx28.
+
+Examples:
+dma-apbh@80004000 {
+ compatible = "fsl,imx28-dma-apbh";
+ reg = <0x80004000 2000>;
+};
+
+dma-apbx@80024000 {
+ compatible = "fsl,imx28-dma-apbx";
+ reg = <0x80024000 2000>;
+};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-mxs.txt b/Documentation/devicetree/bindings/gpio/gpio-mxs.txt
new file mode 100644
index 00000000000..0c35673f7a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-mxs.txt
@@ -0,0 +1,87 @@
+* Freescale MXS GPIO controller
+
+The Freescale MXS GPIO controller is part of MXS PIN controller. The
+GPIOs are organized in port/bank. Each port consists of 32 GPIOs.
+
+As the GPIO controller is embedded in the PIN controller and all the
+GPIO ports share the same IO space with PIN controller, the GPIO node
+will be represented as sub-nodes of MXS pinctrl node.
+
+Required properties for GPIO node:
+- compatible : Should be "fsl,<soc>-gpio". The supported SoCs include
+ imx23 and imx28.
+- interrupts : Should be the port interrupt shared by all 32 pins.
+- gpio-controller : Marks the device node as a gpio controller.
+- #gpio-cells : Should be two. The first cell is the pin number and
+ the second cell is used to specify optional parameters (currently
+ unused).
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells : Should be 2. The first cell is the GPIO number.
+ The second cell bits[3:0] is used to specify trigger type and level flags:
+ 1 = low-to-high edge triggered.
+ 2 = high-to-low edge triggered.
+ 4 = active high level-sensitive.
+ 8 = active low level-sensitive.
+
+Note: Each GPIO port should have an alias correctly numbered in "aliases"
+node.
+
+Examples:
+
+aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ gpio3 = &gpio3;
+ gpio4 = &gpio4;
+};
+
+pinctrl@80018000 {
+ compatible = "fsl,imx28-pinctrl", "simple-bus";
+ reg = <0x80018000 2000>;
+
+ gpio0: gpio@0 {
+ compatible = "fsl,imx28-gpio";
+ interrupts = <127>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio@1 {
+ compatible = "fsl,imx28-gpio";
+ interrupts = <126>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio@2 {
+ compatible = "fsl,imx28-gpio";
+ interrupts = <125>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio@3 {
+ compatible = "fsl,imx28-gpio";
+ interrupts = <124>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio4: gpio@4 {
+ compatible = "fsl,imx28-gpio";
+ interrupts = <123>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mxs.txt b/Documentation/devicetree/bindings/i2c/i2c-mxs.txt
new file mode 100644
index 00000000000..1bfc02de1b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mxs.txt
@@ -0,0 +1,16 @@
+* Freescale MXS Inter IC (I2C) Controller
+
+Required properties:
+- compatible: Should be "fsl,<chip>-i2c"
+- reg: Should contain registers location and length
+- interrupts: Should contain ERROR and DMA interrupts
+
+Examples:
+
+i2c0: i2c@80058000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx28-i2c";
+ reg = <0x80058000 2000>;
+ interrupts = <111 68>;
+};
diff --git a/Documentation/devicetree/bindings/mmc/mxs-mmc.txt b/Documentation/devicetree/bindings/mmc/mxs-mmc.txt
new file mode 100644
index 00000000000..14d870a9e3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/mxs-mmc.txt
@@ -0,0 +1,25 @@
+* Freescale MXS MMC controller
+
+The Freescale MXS Synchronous Serial Ports (SSP) can act as a MMC controller
+to support MMC, SD, and SDIO types of memory cards.
+
+Required properties:
+- compatible: Should be "fsl,<chip>-mmc". The supported chips include
+ imx23 and imx28.
+- reg: Should contain registers location and length
+- interrupts: Should contain ERROR and DMA interrupts
+- fsl,ssp-dma-channel: APBH DMA channel for the SSP
+- bus-width: Number of data lines, can be <1>, <4>, or <8>
+
+Optional properties:
+- wp-gpios: Specify GPIOs for write protection
+
+Examples:
+
+ssp0: ssp@80010000 {
+ compatible = "fsl,imx28-mmc";
+ reg = <0x80010000 2000>;
+ interrupts = <96 82>;
+ fsl,ssp-dma-channel = <0>;
+ bus-width = <8>;
+};
diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt
index de439517dff..7ab9e1a2d8b 100644
--- a/Documentation/devicetree/bindings/net/fsl-fec.txt
+++ b/Documentation/devicetree/bindings/net/fsl-fec.txt
@@ -14,7 +14,7 @@ Optional properties:
Example:
-fec@83fec000 {
+ethernet@83fec000 {
compatible = "fsl,imx51-fec", "fsl,imx27-fec";
reg = <0x83fec000 0x4000>;
interrupts = <87>;
diff --git a/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt
index a9c0406280e..b462d0c5482 100644
--- a/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt
+++ b/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt
@@ -11,7 +11,7 @@ Optional properties:
Example:
-uart@73fbc000 {
+serial@73fbc000 {
compatible = "fsl,imx51-uart", "fsl,imx21-uart";
reg = <0x73fbc000 0x4000>;
interrupts = <31>;
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 515c8c85cbb..5e7601301b4 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -459,6 +459,7 @@ config ARCH_MXS
select COMMON_CLK
select HAVE_CLK_PREPARE
select PINCTRL
+ select USE_OF
help
Support for Freescale MXS-based family of processors
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index e561adc1db0..01a13414121 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -209,6 +209,14 @@ choice
Say Y here if you want kernel low-level debugging support
on i.MX50 or i.MX53.
+ config DEBUG_IMX6Q_UART2
+ bool "i.MX6Q Debug UART2"
+ depends on SOC_IMX6Q
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX6Q UART2. This is correct for e.g. the SabreLite
+ board.
+
config DEBUG_IMX6Q_UART4
bool "i.MX6Q Debug UART4"
depends on SOC_IMX6Q
diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts
new file mode 100644
index 00000000000..70bffa929b6
--- /dev/null
+++ b/arch/arm/boot/dts/imx23-evk.dts
@@ -0,0 +1,43 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx23.dtsi"
+
+/ {
+ model = "Freescale i.MX23 Evaluation Kit";
+ compatible = "fsl,imx23-evk", "fsl,imx23";
+
+ memory {
+ reg = <0x40000000 0x08000000>;
+ };
+
+ apb@80000000 {
+ apbh@80000000 {
+ ssp0: ssp@80010000 {
+ compatible = "fsl,imx23-mmc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_8bit_pins_a &mmc0_pins_fixup>;
+ bus-width = <8>;
+ wp-gpios = <&gpio1 30 0>;
+ status = "okay";
+ };
+ };
+
+ apbx@80040000 {
+ duart: serial@80070000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&duart_pins_a>;
+ status = "okay";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
new file mode 100644
index 00000000000..8c5f9994f3f
--- /dev/null
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -0,0 +1,295 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ interrupt-parent = <&icoll>;
+
+ aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ };
+
+ cpus {
+ cpu@0 {
+ compatible = "arm,arm926ejs";
+ };
+ };
+
+ apb@80000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x80000000 0x80000>;
+ ranges;
+
+ apbh@80000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x80000000 0x40000>;
+ ranges;
+
+ icoll: interrupt-controller@80000000 {
+ compatible = "fsl,imx23-icoll", "fsl,mxs-icoll";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x80000000 0x2000>;
+ };
+
+ dma-apbh@80004000 {
+ compatible = "fsl,imx23-dma-apbh";
+ reg = <0x80004000 2000>;
+ };
+
+ ecc@80008000 {
+ reg = <0x80008000 2000>;
+ status = "disabled";
+ };
+
+ bch@8000a000 {
+ reg = <0x8000a000 2000>;
+ status = "disabled";
+ };
+
+ gpmi@8000c000 {
+ reg = <0x8000c000 2000>;
+ status = "disabled";
+ };
+
+ ssp0: ssp@80010000 {
+ reg = <0x80010000 2000>;
+ interrupts = <15 14>;
+ fsl,ssp-dma-channel = <1>;
+ status = "disabled";
+ };
+
+ etm@80014000 {
+ reg = <0x80014000 2000>;
+ status = "disabled";
+ };
+
+ pinctrl@80018000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx23-pinctrl", "simple-bus";
+ reg = <0x80018000 2000>;
+
+ gpio0: gpio@0 {
+ compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+ interrupts = <16>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio@1 {
+ compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+ interrupts = <17>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio@2 {
+ compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+ interrupts = <18>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ duart_pins_a: duart@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <0x11a2 0x11b2>;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ mmc0_8bit_pins_a: mmc0-8bit@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <0x2020 0x2030 0x2040
+ 0x2050 0x0082 0x0092 0x00a2
+ 0x00b2 0x2000 0x2010 0x2060>;
+ fsl,drive-strength = <1>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+
+ mmc0_pins_fixup: mmc0-pins-fixup {
+ fsl,pinmux-ids = <0x2010 0x2060>;
+ fsl,pull-up = <0>;
+ };
+ };
+
+ digctl@8001c000 {
+ reg = <0x8001c000 2000>;
+ status = "disabled";
+ };
+
+ emi@80020000 {
+ reg = <0x80020000 2000>;
+ status = "disabled";
+ };
+
+ dma-apbx@80024000 {
+ compatible = "fsl,imx23-dma-apbx";
+ reg = <0x80024000 2000>;
+ };
+
+ dcp@80028000 {
+ reg = <0x80028000 2000>;
+ status = "disabled";
+ };
+
+ pxp@8002a000 {
+ reg = <0x8002a000 2000>;
+ status = "disabled";
+ };
+
+ ocotp@8002c000 {
+ reg = <0x8002c000 2000>;
+ status = "disabled";
+ };
+
+ axi-ahb@8002e000 {
+ reg = <0x8002e000 2000>;
+ status = "disabled";
+ };
+
+ lcdif@80030000 {
+ reg = <0x80030000 2000>;
+ status = "disabled";
+ };
+
+ ssp1: ssp@80034000 {
+ reg = <0x80034000 2000>;
+ interrupts = <2 20>;
+ fsl,ssp-dma-channel = <2>;
+ status = "disabled";
+ };
+
+ tvenc@80038000 {
+ reg = <0x80038000 2000>;
+ status = "disabled";
+ };
+ };
+
+ apbx@80040000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x80040000 0x40000>;
+ ranges;
+
+ clkctl@80040000 {
+ reg = <0x80040000 2000>;
+ status = "disabled";
+ };
+
+ saif0: saif@80042000 {
+ reg = <0x80042000 2000>;
+ status = "disabled";
+ };
+
+ power@80044000 {
+ reg = <0x80044000 2000>;
+ status = "disabled";
+ };
+
+ saif1: saif@80046000 {
+ reg = <0x80046000 2000>;
+ status = "disabled";
+ };
+
+ audio-out@80048000 {
+ reg = <0x80048000 2000>;
+ status = "disabled";
+ };
+
+ audio-in@8004c000 {
+ reg = <0x8004c000 2000>;
+ status = "disabled";
+ };
+
+ lradc@80050000 {
+ reg = <0x80050000 2000>;
+ status = "disabled";
+ };
+
+ spdif@80054000 {
+ reg = <0x80054000 2000>;
+ status = "disabled";
+ };
+
+ i2c@80058000 {
+ reg = <0x80058000 2000>;
+ status = "disabled";
+ };
+
+ rtc@8005c000 {
+ reg = <0x8005c000 2000>;
+ status = "disabled";
+ };
+
+ pwm@80064000 {
+ reg = <0x80064000 2000>;
+ status = "disabled";
+ };
+
+ timrot@80068000 {
+ reg = <0x80068000 2000>;
+ status = "disabled";
+ };
+
+ auart0: serial@8006c000 {
+ reg = <0x8006c000 0x2000>;
+ status = "disabled";
+ };
+
+ auart1: serial@8006e000 {
+ reg = <0x8006e000 0x2000>;
+ status = "disabled";
+ };
+
+ duart: serial@80070000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x80070000 0x2000>;
+ interrupts = <0>;
+ status = "disabled";
+ };
+
+ usbphy@8007c000 {
+ reg = <0x8007c000 0x2000>;
+ status = "disabled";
+ };
+ };
+ };
+
+ ahb@80080000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x80080000 0x80000>;
+ ranges;
+
+ usbctrl@80080000 {
+ reg = <0x80080000 0x10000>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore.dts b/arch/arm/boot/dts/imx27-phytec-phycore.dts
index a51a08fc2af..2b0ff60247a 100644
--- a/