diff options
| author | Rob Herring <rob.herring@calxeda.com> | 2012-03-30 23:37:53 -0500 |
|---|---|---|
| committer | Rob Herring <rob.herring@calxeda.com> | 2012-04-06 08:26:18 -0500 |
| commit | c65f2abf54a6d07260f1fa64773154e1d7047961 (patch) | |
| tree | 5ebc35115ba1f4d46727cc6db0b4f70ec3f9b437 | |
| parent | dd775ae2549217d3ae09363e3edb305d0fa19928 (diff) | |
ARM: remove ixp23xx and ixp2000 platforms
ixp2xxx platforms have had no real changes since ~2006 and the maintainer
has said on irc that they can be removed:
13:05 < nico> do you still care about ixp2000?
13:22 < lennert> not really, no
13:58 < nico> do you think we could remove it from the kernel tree?
14:01 < lennert> go for it, and remove ixp23xx too while you're at it
Removing will help simplify ARM consolidation in general and PCI re-work
specifically.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>
55 files changed, 0 insertions, 6950 deletions
diff --git a/Documentation/arm/00-INDEX b/Documentation/arm/00-INDEX index 91c24a1e8a9..36420e116c9 100644 --- a/Documentation/arm/00-INDEX +++ b/Documentation/arm/00-INDEX @@ -4,8 +4,6 @@ Booting - requirements for booting Interrupts - ARM Interrupt subsystem documentation -IXP2000 - - Release Notes for Linux on Intel's IXP2000 Network Processor msm - MSM specific documentation Netwinder diff --git a/Documentation/arm/IXP2000 b/Documentation/arm/IXP2000 deleted file mode 100644 index 68d21d92a30..00000000000 --- a/Documentation/arm/IXP2000 +++ /dev/null @@ -1,69 +0,0 @@ - -------------------------------------------------------------------------- -Release Notes for Linux on Intel's IXP2000 Network Processor - -Maintained by Deepak Saxena <dsaxena@plexity.net> -------------------------------------------------------------------------- - -1. Overview - -Intel's IXP2000 family of NPUs (IXP2400, IXP2800, IXP2850) is designed -for high-performance network applications such high-availability -telecom systems. In addition to an XScale core, it contains up to 8 -"MicroEngines" that run special code, several high-end networking -interfaces (UTOPIA, SPI, etc), a PCI host bridge, one serial port, -flash interface, and some other odds and ends. For more information, see: - -http://developer.intel.com - -2. Linux Support - -Linux currently supports the following features on the IXP2000 NPUs: - -- On-chip serial -- PCI -- Flash (MTD/JFFS2) -- I2C through GPIO -- Timers (watchdog, OS) - -That is about all we can support under Linux ATM b/c the core networking -components of the chip are accessed via Intel's closed source SDK. -Please contact Intel directly on issues with using those. There is -also a mailing list run by some folks at Princeton University that might -be of help: https://lists.cs.princeton.edu/mailman/listinfo/ixp2xxx - -WHATEVER YOU DO, DO NOT POST EMAIL TO THE LINUX-ARM OR LINUX-ARM-KERNEL -MAILING LISTS REGARDING THE INTEL SDK. - -3. Supported Platforms - -- Intel IXDP2400 Reference Platform -- Intel IXDP2800 Reference Platform -- Intel IXDP2401 Reference Platform -- Intel IXDP2801 Reference Platform -- RadiSys ENP-2611 - -4. Usage Notes - -- The IXP2000 platforms usually have rather complex PCI bus topologies - with large memory space requirements. In addition, b/c of the way the - Intel SDK is designed, devices are enumerated in a very specific - way. B/c of this this, we use "pci=firmware" option in the kernel - command line so that we do not re-enumerate the bus. - -- IXDP2x01 systems have variable clock tick rates that we cannot determine - via HW registers. The "ixdp2x01_clk=XXX" cmd line options allow you - to pass the clock rate to the board port. - -5. Thanks - -The IXP2000 work has been funded by Intel Corp. and MontaVista Software, Inc. - -The following people have contributed patches/comments/etc: - -Naeem F. Afzal -Lennert Buytenhek -Jeffrey Daly - -------------------------------------------------------------------------- -Last Update: 8/09/2004 diff --git a/MAINTAINERS b/MAINTAINERS index eecf3441ac2..defc06a0feb 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -640,13 +640,6 @@ S: Maintained F: drivers/amba/ F: include/linux/amba/bus.h -ARM/ADI ROADRUNNER MACHINE SUPPORT -M: Lennert Buytenhek <kernel@wantstofly.org> -L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -S: Maintained -F: arch/arm/mach-ixp23xx/ -F: arch/arm/mach-ixp23xx/include/mach/ - ARM/ADS SPHERE MACHINE SUPPORT M: Lennert Buytenhek <kernel@wantstofly.org> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) @@ -859,21 +852,11 @@ M: Dan Williams <dan.j.williams@intel.com> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained -ARM/INTEL IXP2000 ARM ARCHITECTURE -M: Lennert Buytenhek <kernel@wantstofly.org> -L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -S: Maintained - ARM/INTEL IXDP2850 MACHINE SUPPORT M: Lennert Buytenhek <kernel@wantstofly.org> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained -ARM/INTEL IXP23XX ARM ARCHITECTURE -M: Lennert Buytenhek <kernel@wantstofly.org> -L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -S: Maintained - ARM/INTEL IXP4XX ARM ARCHITECTURE M: Imre Kaloz <kaloz@openwrt.org> M: Krzysztof Halasa <khc@pm.waw.pl> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 93180845ae1..6b242f431e3 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -527,28 +527,6 @@ config ARCH_IOP33X help Support for Intel's IOP33X (XScale) family of processors. -config ARCH_IXP23XX - bool "IXP23XX-based" - depends on MMU - select CPU_XSC3 - select PCI - select ARCH_USES_GETTIMEOFFSET - select NEED_MACH_IO_H - select NEED_MACH_MEMORY_H - help - Support for Intel's IXP23xx (XScale) family of processors. - -config ARCH_IXP2000 - bool "IXP2400/2800-based" - depends on MMU - select CPU_XSCALE - select PCI - select ARCH_USES_GETTIMEOFFSET - select NEED_MACH_IO_H - select NEED_MACH_MEMORY_H - help - Support for Intel's IXP2400/2800 (XScale) family of processors. - config ARCH_IXP4XX bool "IXP4xx-based" depends on MMU @@ -1045,10 +1023,6 @@ source "arch/arm/mach-iop13xx/Kconfig" source "arch/arm/mach-ixp4xx/Kconfig" -source "arch/arm/mach-ixp2000/Kconfig" - -source "arch/arm/mach-ixp23xx/Kconfig" - source "arch/arm/mach-kirkwood/Kconfig" source "arch/arm/mach-ks8695/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 047a20780fc..a0c40a0986c 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -149,8 +149,6 @@ machine-$(CONFIG_ARCH_INTEGRATOR) := integrator machine-$(CONFIG_ARCH_IOP13XX) := iop13xx machine-$(CONFIG_ARCH_IOP32X) := iop32x machine-$(CONFIG_ARCH_IOP33X) := iop33x -machine-$(CONFIG_ARCH_IXP2000) := ixp2000 -machine-$(CONFIG_ARCH_IXP23XX) := ixp23xx machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx machine-$(CONFIG_ARCH_KIRKWOOD) := kirkwood machine-$(CONFIG_ARCH_KS8695) := ks8695 diff --git a/arch/arm/boot/compressed/head-xscale.S b/arch/arm/boot/compressed/head-xscale.S index aa5ee49c5c5..6ab0599c02d 100644 --- a/arch/arm/boot/compressed/head-xscale.S +++ b/arch/arm/boot/compressed/head-xscale.S @@ -32,10 +32,3 @@ __XScale_start: bic r0, r0, #0x1000 @ clear Icache mcr p15, 0, r0, c1, c0, 0 -#ifdef CONFIG_ARCH_IXP2000 - mov r1, #-1 - mov r0, #0xd6000000 - str r1, [r0, #0x14] - str r1, [r0, #0x18] -#endif - diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile index 215816f1775..e8a4e58f1b8 100644 --- a/arch/arm/common/Makefile +++ b/arch/arm/common/Makefile @@ -11,7 +11,5 @@ obj-$(CONFIG_DMABOUNCE) += dmabounce.o obj-$(CONFIG_SHARP_LOCOMO) += locomo.o obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o obj-$(CONFIG_SHARP_SCOOP) += scoop.o -obj-$(CONFIG_ARCH_IXP2000) += uengine.o -obj-$(CONFIG_ARCH_IXP23XX) += uengine.o obj-$(CONFIG_PCI_HOST_ITE8152) += it8152.o obj-$(CONFIG_ARM_TIMER_SP804) += timer-sp.o diff --git a/arch/arm/common/uengine.c b/arch/arm/common/uengine.c deleted file mode 100644 index bef408f3d76..00000000000 --- a/arch/arm/common/uengine.c +++ /dev/null @@ -1,507 +0,0 @@ -/* - * Generic library functions for the microengines found on the Intel - * IXP2000 series of network processors. - * - * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org> - * Dedicated to Marija Kulikova. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU Lesser General Public License as - * published by the Free Software Foundation; either version 2.1 of the - * License, or (at your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/module.h> -#include <linux/string.h> -#include <linux/io.h> -#include <mach/hardware.h> -#include <asm/hardware/uengine.h> - -#if defined(CONFIG_ARCH_IXP2000) -#define IXP_UENGINE_CSR_VIRT_BASE IXP2000_UENGINE_CSR_VIRT_BASE -#define IXP_PRODUCT_ID IXP2000_PRODUCT_ID -#define IXP_MISC_CONTROL IXP2000_MISC_CONTROL -#define IXP_RESET1 IXP2000_RESET1 -#else -#if defined(CONFIG_ARCH_IXP23XX) -#define IXP_UENGINE_CSR_VIRT_BASE IXP23XX_UENGINE_CSR_VIRT_BASE -#define IXP_PRODUCT_ID IXP23XX_PRODUCT_ID -#define IXP_MISC_CONTROL IXP23XX_MISC_CONTROL -#define IXP_RESET1 IXP23XX_RESET1 -#else -#error unknown platform -#endif -#endif - -#define USTORE_ADDRESS 0x000 -#define USTORE_DATA_LOWER 0x004 -#define USTORE_DATA_UPPER 0x008 -#define CTX_ENABLES 0x018 -#define CC_ENABLE 0x01c -#define CSR_CTX_POINTER 0x020 -#define INDIRECT_CTX_STS 0x040 -#define ACTIVE_CTX_STS 0x044 -#define INDIRECT_CTX_SIG_EVENTS 0x048 -#define INDIRECT_CTX_WAKEUP_EVENTS 0x050 -#define NN_PUT 0x080 -#define NN_GET 0x084 -#define TIMESTAMP_LOW 0x0c0 -#define TIMESTAMP_HIGH 0x0c4 -#define T_INDEX_BYTE_INDEX 0x0f4 -#define LOCAL_CSR_STATUS 0x180 - -u32 ixp2000_uengine_mask; - -static void *ixp2000_uengine_csr_area(int uengine) -{ - return ((void *)IXP_UENGINE_CSR_VIRT_BASE) + (uengine << 10); -} - -/* - * LOCAL_CSR_STATUS=1 after a read or write to a microengine's CSR - * space means that the microengine we tried to access was also trying - * to access its own CSR space on the same clock cycle as we did. When - * this happens, we lose the arbitration process by default, and the - * read or write we tried to do was not actually performed, so we try - * again until it succeeds. - */ -u32 ixp2000_uengine_csr_read(int uengine, int offset) -{ - void *uebase; - u32 *local_csr_status; - u32 *reg; - u32 value; - - uebase = ixp2000_uengine_csr_area(uengine); - - local_csr_status = (u32 *)(uebase + LOCAL_CSR_STATUS); - reg = (u32 *)(uebase + offset); - do { - value = ixp2000_reg_read(reg); - } while (ixp2000_reg_read(local_csr_status) & 1); - - return value; -} -EXPORT_SYMBOL(ixp2000_uengine_csr_read); - -void ixp2000_uengine_csr_write(int uengine, int offset, u32 value) -{ - void *uebase; - u32 *local_csr_status; - u32 *reg; - - uebase = ixp2000_uengine_csr_area(uengine); - - local_csr_status = (u32 *)(uebase + LOCAL_CSR_STATUS); - reg = (u32 *)(uebase + offset); - do { - ixp2000_reg_write(reg, value); - } while (ixp2000_reg_read(local_csr_status) & 1); -} -EXPORT_SYMBOL(ixp2000_uengine_csr_write); - -void ixp2000_uengine_reset(u32 uengine_mask) -{ - u32 value; - - value = ixp2000_reg_read(IXP_RESET1) & ~ixp2000_uengine_mask; - - uengine_mask &= ixp2000_uengine_mask; - ixp2000_reg_wrb(IXP_RESET1, value | uengine_mask); - ixp2000_reg_wrb(IXP_RESET1, value); -} -EXPORT_SYMBOL(ixp2000_uengine_reset); - -void ixp2000_uengine_set_mode(int uengine, u32 mode) -{ - /* - * CTL_STR_PAR_EN: unconditionally enable parity checking on - * control store. - */ - mode |= 0x10000000; - ixp2000_uengine_csr_write(uengine, CTX_ENABLES, mode); - - /* - * Enable updating of condition codes. - */ - ixp2000_uengine_csr_write(uengine, CC_ENABLE, 0x00002000); - - /* - * Initialise other per-microengine registers. - */ - ixp2000_uengine_csr_write(uengine, NN_PUT, 0x00); - ixp2000_uengine_csr_write(uengine, NN_GET, 0x00); - ixp2000_uengine_csr_write(uengine, T_INDEX_BYTE_INDEX, 0); -} -EXPORT_SYMBOL(ixp2000_uengine_set_mode); - -static int make_even_parity(u32 x) -{ - return hweight32(x) & 1; -} - -static void ustore_write(int uengine, u64 insn) -{ - /* - * Generate even parity for top and bottom 20 bits. - */ - insn |= (u64)make_even_parity((insn >> 20) & 0x000fffff) << 41; - insn |= (u64)make_even_parity(insn & 0x000fffff) << 40; - - /* - * Write to microstore. The second write auto-increments - * the USTORE_ADDRESS index register. - */ - ixp2000_uengine_csr_write(uengine, USTORE_DATA_LOWER, (u32)insn); - ixp2000_uengine_csr_write(uengine, USTORE_DATA_UPPER, (u32)(insn >> 32)); -} - -void ixp2000_uengine_load_microcode(int uengine, u8 *ucode, int insns) -{ - int i; - - /* - * Start writing to microstore at address 0. - */ - ixp2000_uengine_csr_write(uengine, USTORE_ADDRESS, 0x80000000); - for (i = 0; i < insns; i++) { - u64 insn; - - insn = (((u64)ucode[0]) << 32) | - (((u64)ucode[1]) << 24) | - (((u64)ucode[2]) << 16) | - (((u64)ucode[3]) << 8) | - ((u64)ucode[4]); - ucode += 5; - - ustore_write(uengine, insn); - } - - /* - * Pad with a few NOPs at the end (to avoid the microengine - * aborting as it prefetches beyond the last instruction), unless - * we run off the end of the instruction store first, at which - * point the address register will wrap back to zero. - */ - for (i = 0; i < 4; i++) { - u32 addr; - - addr = ixp2000_uengine_csr_read(uengine, USTORE_ADDRESS); - if (addr == 0x80000000) - break; - ustore_write(uengine, 0xf0000c0300ULL); - } - - /* - * End programming. - */ - ixp2000_uengine_csr_write(uengine, USTORE_ADDRESS, 0x00000000); -} -EXPORT_SYMBOL(ixp2000_uengine_load_microcode); - -void ixp2000_uengine_init_context(int uengine, int context, int pc) -{ - /* - * Select the right context for indirect access. - */ - ixp2000_uengine_csr_write(uengine, CSR_CTX_POINTER, context); - - /* - * Initialise signal masks to immediately go to Ready state. - */ - ixp2000_uengine_csr_write(uengine, INDIRECT_CTX_SIG_EVENTS, 1); - ixp2000_uengine_csr_write(uengine, INDIRECT_CTX_WAKEUP_EVENTS, 1); - - /* - * Set program counter. - */ - ixp2000_uengine_csr_write(uengine, INDIRECT_CTX_STS, pc); -} -EXPORT_SYMBOL(ixp2000_uengine_init_context); - -void ixp2000_uengine_start_contexts(int uengine, u8 ctx_mask) -{ - u32 mask; - - /* - * Enable the specified context to go to Executing state. - */ - mask = ixp2000_uengine_csr_read(uengine, CTX_ENABLES); - mask |= ctx_mask << 8; - ixp2000_uengine_csr_write(uengine, CTX_ENABLES, mask); -} -EXPORT_SYMBOL(ixp2000_uengine_start_contexts); - -void ixp2000_uengine_stop_contexts(int uengine, u8 ctx_mask) -{ - u32 mask; - - /* - * Disable the Ready->Executing transition. Note that this - * does not stop the context until it voluntarily yields. - */ - mask = ixp2000_uengine_csr_read(uengine, CTX_ENABLES); - mask &= ~(ctx_mask << 8); - ixp2000_uengine_csr_write(uengine, CTX_ENABLES, mask); -} -EXPORT_SYMBOL(ixp2000_uengine_stop_contexts); - -static int check_ixp_type(struct ixp2000_uengine_code *c) -{ - u32 product_id; - u32 rev; - - product_id = ixp2000_reg_read(IXP_PRODUCT_ID); - if (((product_id >> 16) & 0x1f) != 0) - return 0; - - switch ((product_id >> 8) & 0xff) { -#ifdef CONFIG_ARCH_IXP2000 - case 0: /* IXP2800 */ - if (!(c->cpu_model_bitmask & 4)) - return 0; - break; - - case 1: /* IXP2850 */ - if (!(c->cpu_model_bitmask & 8)) - return 0; - break; - - case 2: /* IXP2400 */ - if (!(c->cpu_model_bitmask & 2)) - return 0; - break; -#endif - -#ifdef CONFIG_ARCH_IXP23XX - case 4: /* IXP23xx */ - if (!(c->cpu_model_bitmask & 0x3f0)) - return 0; - break; -#endif - - default: - return 0; - } - - rev = product_id & 0xff; - if (rev < c->cpu_min_revision || rev > c->cpu_max_revision) - return 0; - - return 1; -} - -static void generate_ucode(u8 *ucode, u32 *gpr_a, u32 *gpr_b) -{ - int offset; - int i; - - offset = 0; - - for (i = 0; i < 128; i++) { - u8 b3; - u8 b2; - u8 b1; - u8 b0; - - b3 = (gpr_a[i] >> 24) & 0xff; - b2 = (gpr_a[i] >> 16) & 0xff; - b1 = (gpr_a[i] >> 8) & 0xff; - b0 = gpr_a[i] & 0xff; - - /* immed[@ai, (b1 << 8) | b0] */ - /* 11110000 0000VVVV VVVV11VV VVVVVV00 1IIIIIII */ - ucode[offset++] = 0xf0; - ucode[offset++] = (b1 >> 4); - ucode[offset++] = (b1 << 4) | 0x0c | (b0 >> 6); - ucode[offset++] = (b0 << 2); - ucode[offset++] = 0x80 | i; - - /* immed_w1[@ai, (b3 << 8) | b2] */ - /* 11110100 0100VVVV VVVV11VV VVVVVV00 1IIIIIII */ - ucode[offset++] = 0xf4; - ucode[offset++] = 0x40 | (b3 >> 4); - ucode[offset++] = (b3 << 4) | 0x0c | (b2 >> 6); - ucode[offset++] = (b2 << 2); - ucode[offset++] = 0x80 | i; - } - - for (i = 0; i < 128; i++) { - u8 b3; - u8 b2; - u8 b1; - u8 b0; - - b3 = (gpr_b[i] >> 24) & 0xff; - b2 = (gpr_b[i] >> 16) & 0xff; - b1 = (gpr_b[i] >> 8) & 0xff; - b0 = gpr_b[i] & 0xff; - - /* immed[@bi, (b1 << 8) | b0] */ - /* 11110000 0000VVVV VVVV001I IIIIII11 VVVVVVVV */ - ucode[offset++] = 0xf0; - ucode[offset++] = (b1 >> 4); - ucode[offset++] = (b1 << 4) | 0x02 | (i >> 6); - ucode[offset++] = (i << 2) | 0x03; - ucode[offset++] = b0; - - /* immed_w1[@bi, (b3 << 8) | b2] */ - /* 11110100 0100VVVV VVVV001I IIIIII11 VVVVVVVV */ - ucode[offset++] = 0xf4; - ucode[offset++] = 0x40 | (b3 >> 4); - ucode[offset++] = (b3 << 4) | 0x02 | (i >> 6); - ucode[offset++] = (i << 2) | 0x03; - ucode[offset++] = b2; - } - - /* ctx_arb[kill] */ - ucode[offset++] = 0xe0; - ucode[offset++] = 0x00; - ucode[offset++] = 0x01; - ucode[offset++] = 0x00; - ucode[offset++] = 0x00; -} - -static int set_initial_registers(int uengine, struct ixp2000_uengine_code *c) -{ - int per_ctx_regs; - u32 *gpr_a; - u32 *gpr_b; - u8 *ucode; - int i; - - gpr_a = kzalloc(128 * sizeof(u32), GFP_KERNEL); - gpr_b = kzalloc(128 * sizeof(u32), GFP_KERNEL); - ucode = kmalloc(513 * 5, GFP_KERNEL); - if (gpr_a == NULL || gpr_b == NULL || ucode == NULL) { - kfree(ucode); - kfree(gpr_b); - kfree(gpr_a); - return 1; - } - - per_ctx_regs = 16; - if (c->uengine_parameters & IXP2000_UENGINE_4_CONTEXTS) - per_ctx_regs = 32; - - for (i = 0; i < 256; i++) { - struct ixp2000_reg_value *r = c->initial_reg_values + i; - u32 *bank; - int inc; - int j; - - if (r->reg == -1) - break; - - bank = (r->reg & 0x400) ? gpr_b : gpr_a; - inc = (r->reg & 0x80) ? 128 : per_ctx_regs; - - j = r->reg & 0x7f; - while (j < 128) { - bank[j] = r->value; - j += inc; - } - } - - generate_ucode(ucode, gpr_a, gpr_b); - ixp2000_uengine_load_microcode(uengine, ucode, 513); - ixp2000_uengine_init_context(uengine, 0, 0); - ixp2000_uengine_start_contexts(uengine, 0x01); - for (i = 0; i < 100; i++) { - u32 status; - - status = ixp2000_uengine_csr_read(uengine, ACTIVE_CTX_STS); - if (!(status & 0x80000000)) - break; - } - ixp2000_uengine_stop_contexts(uengine, 0x01); - - kfree(ucode); - kfree(gpr_b); - kfree(gpr_a); - - return !!(i == 100); -} - -int ixp2000_uengine_load(int uengine, struct ixp2000_uengine_code *c) -{ - int ctx; - - if (!check_ixp_type(c)) - return 1; - - if (!(ixp2000_uengine_mask & (1 << uengine))) - return 1; - - ixp2000_uengine_reset(1 << uengine); - ixp2000_uengine_set_mode(uengine, c->uengine_parameters); - if (set_initial_registers(uengine, c)) - return 1; - ixp2000_uengine_load_microcode(uengine, c->insns, c->num_insns); - - for (ctx = 0; ctx < 8; ctx++) - ixp2000_uengine_init_context(uengine, ctx, 0); - - return 0; -} -EXPORT_SYMBOL(ixp2000_uengine_load); - - -static int __init ixp2000_uengine_init(void) -{ - int uengine; - u32 value; - - /* - * Determine number of microengines present. - */ - switch ((ixp2000_reg_read(IXP_PRODUCT_ID) >> 8) & 0x1fff) { -#ifdef CONFIG_ARCH_IXP2000 - case 0: /* IXP2800 */ - case 1: /* IXP2850 */ - ixp2000_uengine_mask = 0x00ff00ff; - break; - - case 2: /* IXP2400 */ - ixp2000_uengine_mask = 0x000f000f; - break; -#endif - -#ifdef CONFIG_ARCH_IXP23XX - case 4: /* IXP23xx */ - ixp2000_uengine_mask = (*IXP23XX_EXP_CFG_FUSE >> 8) & 0xf; - break; -#endif - - default: - printk(KERN_INFO "Detected unknown IXP2000 model (%.8x)\n", - (unsigned int)ixp2000_reg_read(IXP_PRODUCT_ID)); - ixp2000_uengine_mask = 0x00000000; - break; - } - - /* - * Reset microengines. - */ - ixp2000_uengine_reset(ixp2000_uengine_mask); - - /* - * Synchronise timestamp counters across all microengines. - */ - value = ixp2000_reg_read(IXP_MISC_CONTROL); - ixp2000_reg_wrb(IXP_MISC_CONTROL, value & ~0x80); - for (uengine = 0; uengine < 32; uengine++) { - if (ixp2000_uengine_mask & (1 << uengine)) { - ixp2000_uengine_csr_write(uengine, TIMESTAMP_LOW, 0); - ixp2000_uengine_csr_write(uengine, TIMESTAMP_HIGH, 0); - } - } - ixp2000_reg_wrb(IXP_MISC_CONTROL, value | 0x80); - - return 0; -} - -subsys_initcall(ixp2000_uengine_init); diff --git a/arch/arm/configs/ixp2000_defconfig b/arch/arm/configs/ixp2000_defconfig deleted file mode 100644 index 8405aded97a..00000000000 --- a/arch/arm/configs/ixp2000_defconfig +++ /dev/null @@ -1,99 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EXPERT=y -# CONFIG_HOTPLUG is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_ARCH_IXP2000=y -CONFIG_ARCH_ENP2611=y -CONFIG_ARCH_IXDP2400=y -CONFIG_ARCH_IXDP2800=y -CONFIG_ARCH_IXDP2401=y -CONFIG_ARCH_IXDP2801=y -# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set -# CONFIG_ARM_THUMB is not set -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0" -CONFIG_FPE_NWFPE=y -CONFIG_FPE_NWFPE_XP=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_SYN_COOKIES=y -CONFIG_IPV6=y -# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET6_XFRM_MODE_TUNNEL is not set -# CONFIG_INET6_XFRM_MODE_BEET is not set -# CONFIG_IPV6_SIT is not set -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y -CONFIG_MTD_REDBOOT_PARTS_READONLY=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_COMPLEX_MAPPINGS=y -CONFIG_MTD_IXP2000=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_NBD=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_EEPROM_LEGACY=y -CONFIG_NETDEVICES=y -CONFIG_DUMMY=y -CONFIG_NET_ETHERNET=y -CONFIG_NET_PCI=y -CONFIG_CS89x0=y -CONFIG_E100=y -CONFIG_ENP2611_MSF_NET=y -CONFIG_WAN=y -CONFIG_HDLC=y -CONFIG_HDLC_RAW=y -CONFIG_HDLC_CISCO=y -CONFIG_HDLC_FR=y -CONFIG_HDLC_PPP=y -CONFIG_DLCI=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=3 -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_IXP2000=y -CONFIG_WATCHDOG=y -CONFIG_IXP2000_WATCHDOG=y -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_INOTIFY=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_MUTEXES=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/ixp23xx_defconfig b/arch/arm/configs/ixp23xx_defconfig deleted file mode 100644 index 688717612e9..00000000000 --- a/arch/arm/configs/ixp23xx_defconfig +++ /dev/null @@ -1,105 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EXPERT=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_ARCH_IXP23XX=y -CONFIG_MACH_ESPRESSO=y -CONFIG_MACH_IXDP2351=y -CONFIG_MACH_ROADRUNNER=y -# CONFIG_ARM_THUMB is not set -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp" -CONFIG_FPE_NWFPE=y -CONFIG_FPE_NWFPE_XP=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_SYN_COOKIES=y -CONFIG_IPV6=y -# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET6_XFRM_MODE_TUNNEL is not set -# CONFIG_INET6_XFRM_MODE_BEET is not set -# CONFIG_IPV6_SIT is not set -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -# CONFIG_FW_LOADER is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y -CONFIG_MTD_REDBOOT_PARTS_READONLY=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_COMPLEX_MAPPINGS=y -CONFIG_MTD_PHYSMAP=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_NBD=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_EEPROM_LEGACY=y -CONFIG_IDE=y -CONFIG_BLK_DEV_SIIMAGE=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_NETDEVICES=y -CONFIG_DUMMY=y -CONFIG_NET_ETHERNET=y -CONFIG_NET_PCI=y -CONFIG_E100=y -CONFIG_E1000=y -CONFIG_WAN=y -CONFIG_HDLC=y -CONFIG_HDLC_RAW=y -CONFIG_HDLC_CISCO=y -CONFIG_HDLC_FR=y -CONFIG_HDLC_PPP=y -CONFIG_DLCI=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_WATCHDOG=y -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_MON=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_UHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_INOTIFY=y -CONFIG_MSDOS_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_MUTEXES=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/include/asm/hardware/uengine.h b/arch/arm/include/asm/hardware/uengine.h deleted file mode 100644 index b442d65c659..00000000000 --- a/arch/arm/include/asm/hardware/uengine.h +++ /dev/null @@ -1,62 +0,0 @@ -/* - * Generic library functions for the microengines found on the Intel - * IXP2000 series of network processors. - * - * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org> - * Dedicated to Marija Kulikova. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU Lesser General Public License as - * published by the Free Software Foundation; either version 2.1 of the - * License, or (at your option) any later version. - */ - -#ifndef __IXP2000_UENGINE_H -#define __IXP2000_UENGINE_H - -extern u32 ixp2000_uengine_mask; - -struct ixp2000_uengine_code -{ - u32 cpu_model_bitmask; - u8 cpu_min_revision; - u8 cpu_max_revision; - - u32 uengine_parameters; - - struct ixp2000_reg_value { - int reg; - u32 value; - } *initial_reg_values; - - int num_insns; - u8 *insns; -}; - -u32 ixp2000_uengine_csr_read(int uengine, int offset); -void ixp2000_uengine_csr_write(int uengine, int offset, u32 value); -void ixp2000_uengine_reset(u32 uengine_mask); -void ixp2000_uengine_set_mode(int uengine, u32 mode); -void ixp2000_uengine_load_microcode(int uengine, u8 *ucode, int insns); -void ixp2000_uengine_init_context(int uengine, int context, int pc); -void ixp2000_uengine_start_contexts(int uengine, u8 ctx_mask); -void ixp2000_uengine_stop_contexts(int uengine, u8 ctx_mask); -int ixp2000_uengine_load(int uengine, struct ixp2000_uengine_code *c); - -#define IXP2000_UENGINE_8_CONTEXTS 0x00000000 -#define IXP2000_UENGINE_4_CONTEXTS 0x80000000 -#define IXP2000_UENGINE_PRN_UPDATE_EVERY 0x40000000 -#define IXP2000_UENGINE_PRN_UPDATE_ON_ACCESS 0x00000000 -#define IXP2000_UENGINE_NN_FROM_SELF 0x00100000 -#define IXP2000_UENGINE_NN_FROM_PREVIOUS 0x00000000 -#define IXP2000_UENGINE_ASSERT_EMPTY_AT_3 0x000c0000 -#define IXP2000_UENGINE_ASSERT_EMPTY_AT_2 0x00080000 -#define IXP2000_UENGINE_ASSERT_EMPTY_AT_1 0x00040000 -#define IXP2000_UENGINE_ASSERT_EMPTY_AT_0 0x00000000 -#define IXP2000_UENGINE_LM_ADDR1_GLOBAL 0x00020000 -#define IXP2000_UENGINE_LM_ADDR1_PER_CONTEXT 0x00000000 -#define IXP2000_UENGINE_LM_ADDR0_GLOBAL 0x00010000 -#define IXP2000_UENGINE_LM_ADDR0_PER_CONTEXT 0x00000000 - - -#endif diff --git a/arch/arm/mach-ixp2000/Kconfig b/arch/arm/mach-ixp2000/Kconfig deleted file mode 100644 index 08d2707f6ca..00000000000 --- a/arch/arm/mach-ixp2000/Kconfig +++ /dev/null @@ -1,72 +0,0 @@ - -if ARCH_IXP2000 - -config ARCH_SUPPORTS_BIG_ENDIAN - bool - default y - -menu "Intel IXP2400/2800 Implementation Options" - -comment "IXP2400/2800 Platforms" - -config ARCH_ENP2611 - bool "Support Radisys ENP-2611" - help - Say 'Y' here if you want your kernel to support the Radisys - ENP2611 PCI network processing card. For more information on - this card, see <file:Documentation/arm/IXP2000>. - -config ARCH_IXDP2400 - bool "Support Intel IXDP2400" - help - Say 'Y' here if you want your kernel to support the Intel - IXDP2400 reference platform. For more information on - this platform, see <file:Documentation/arm/IXP2000>. - -config ARCH_IXDP2800 - bool "Support Intel IXDP2800" - help - Say 'Y' here if you want your kernel to support the Intel - IXDP2800 reference platform. For more information on - this platform, see <file:Documentation/arm/IXP2000>. - -config ARCH_IXDP2X00 - bool - depends on ARCH_IXDP2400 || ARCH_IXDP2800 - default y - -config ARCH_IXDP2401 - bool "Support Intel IXDP2401" - help - Say 'Y' here if you want your kernel to support the Intel - IXDP2401 reference platform. For more information on - this platform, see <file:Documentation/arm/IXP2000>. - -config ARCH_IXDP2801 - bool "Support Intel IXDP2801 and IXDP28x5" - help - Say 'Y' here if you want your kernel to support the Intel - IXDP2801/2805/2855 reference platforms. For more information on - this platform, see <file:Documentation/arm/IXP2000>. - -config MACH_IXDP28X5 - bool - depends on ARCH_IXDP2801 - default y - -config ARCH_IXDP2X01 - bool - depends on ARCH_IXDP2401 || ARCH_IXDP2801 - default y - -config IXP2000_SUPPORT_BROKEN_PCI_IO - bool "Support broken PCI I/O on older IXP2000s" - default y - help - Say 'N' here if you only intend to run your kernel on an - IXP2000 B0 or later model and do not need the PCI I/O - byteswap workaround. Say 'Y' otherwise. - -endmenu - -endif diff --git a/arch/arm/mach-ixp2000/Makefile b/arch/arm/mach-ixp2000/Makefile deleted file mode 100644 index 1e6139d42a9..00000000000 --- a/arch/arm/mach-ixp2000/Makefile +++ /dev/null @@ -1,14 +0,0 @@ -# -# Makefile for the linux kernel. -# -obj-y := core.o pci.o -obj-m := -obj-n := -obj- := - -obj-$(CONFIG_ARCH_ENP2611) += enp2611.o -obj-$(CONFIG_ARCH_IXDP2400) += ixdp2400.o -obj-$(CONFIG_ARCH_IXDP2800) += ixdp2800.o -obj-$(CONFIG_ARCH_IXDP2X00) += ixdp2x00.o -obj-$(CONFIG_ARCH_IXDP2X01) += ixdp2x01.o - diff --git a/arch/arm/mach-ixp2000/Makefile.boot b/arch/arm/mach-ixp2000/Makefile.boot deleted file mode 100644 index 9c7af91d93d..00000000000 --- a/arch/arm/mach-ixp2000/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ - zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 - diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c deleted file mode 100644 index f214cdff01c..00000000000 --- a/arch/arm/mach-ixp2000/core.c +++ /dev/null @@ -1,520 +0,0 @@ -/* - * arch/arm/mach-ixp2000/core.c - * - * Common routines used by all IXP2400/2800 based platforms. - * - * Author: Deepak Saxena <dsaxena@plexity.net> - * - * Copyright 2004 (C) MontaVista Software, Inc. - * - * Based on work Copyright (C) 2002-2003 Intel Corporation - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/spinlock.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/serial.h> -#include <linux/tty.h> -#include <linux/bitops.h> -#include <linux/serial_8250.h> -#include <linux/mm.h> -#include <linux/export.h> - -#include <asm/types.h> -#include <asm/setup.h> -#include <asm/memory.h> -#include <mach/hardware.h> -#include <asm/irq.h> -#include <asm/tlbflush.h> -#include <asm/pgtable.h> - -#include <asm/mach/map.h> -#include <asm/mach/time.h> -#include <asm/mach/irq.h> - -#include <mach/gpio-ixp2000.h> - -static DEFINE_SPINLOCK(ixp2000_slowport_lock); -static unsigned long ixp2000_slowport_irq_flags; - -/************************************************************************* - * Slowport access routines - *************************************************************************/ -void ixp2000_acquire_slowport(struct slowport_cfg *new_cfg, struct slowport_cfg *old_cfg) -{ - spin_lock_irqsave(&ixp2000_slowport_lock, ixp2000_slowport_irq_flags); - - old_cfg->CCR = *IXP2000_SLOWPORT_CCR; - old_cfg->WTC = *IXP2000_SLOWPORT_WTC2; - old_cfg->RTC = *IXP2000_SLOWPORT_RTC2; - old_cfg->PCR = *IXP2000_SLOWPORT_PCR; - old_cfg->ADC = *IXP2000_SLOWPORT_ADC; - - ixp2000_reg_write(IXP2000_SLOWPORT_CCR, new_cfg->CCR); - ixp2000_reg_write(IXP2000_SLOWPORT_WTC2, new_cfg->WTC); - ixp2000_reg_write(IXP2000_SLOWPORT_RTC2, new_cfg->RTC); - ixp2000_reg_write(IXP2000_SLOWPORT_PCR, new_cfg->PCR); - ixp2000_reg_wrb(IXP2000_SLOWPORT_ADC, new_cfg->ADC); -} - -void ixp2000_release_slowport(struct slowport_cfg *old_cfg) -{ - ixp2000_reg_write(IXP2000_SLOWPORT_CCR, old_cfg->CCR); - ixp2000_reg_write(IXP2000_SLOWPORT_WTC2, old_cfg->WTC); - ixp2000_reg_write(IXP2000_SLOWPORT_RTC2, old_cfg->RTC); - ixp2000_reg_write(IXP2000_SLOWPORT_PCR, old_cfg->PCR); - ixp2000_reg_wrb(IXP2000_SLOWPORT_ADC, old_cfg->ADC); - - spin_unlock_irqrestore(&ixp2000_slowport_lock, - ixp2000_slowport_irq_flags); -} - -/************************************************************************* - * Chip specific mappings shared by all IXP2000 systems - *************************************************************************/ -static struct map_desc ixp2000_io_desc[] __initdata = { - { - .virtual = IXP2000_CAP_VIRT_BASE, - .pfn = __phys_to_pfn(IXP2000_CAP_PHYS_BASE), - .length = IXP2000_CAP_SIZE, - .type = MT_DEVICE, - }, { - .virtual = IXP2000_INTCTL_VIRT_BASE, - .pfn = __phys_to_pfn(IXP2000_INTCTL_PHYS_BASE), - .length = IXP2000_INTCTL_SIZE, - .type = MT_DEVICE, - }, { - .virtual = IXP2000_PCI_CREG_VIRT_BASE, - .pfn = __phys_to_pfn(IXP2000_PCI_CREG_PHYS_BASE), - .length = IXP2000_PCI_CREG_SIZE, - .type = MT_DEVICE, - }, { - .virtual = IXP2000_PCI_CSR_VIRT_BASE, - .pfn = __phys_to_pfn(IXP2000_PCI_CSR_PHYS_BASE), - .length = IXP2000_PCI_CSR_SIZE, - .type = MT_DEVICE, - }, { - .virtual = IXP2000_MSF_VIRT_BASE, - .pfn = __phys_to_pfn(IXP2000_MSF_PHYS_BASE), - .length = IXP2000_MSF_SIZE, - .type = MT_DEVICE, - }, { - .virtual = IXP2000_SCRATCH_RING_VIRT_BASE, - .pfn = __phys_to_pfn(IXP2000_SCRATCH_RING_PHYS_BASE), - .length = IXP2000_SCRATCH_RING_SIZE, - .type = MT_DEVICE, - }, { - .virtual = IXP2000_SRAM0_VIRT_BASE, - .pfn = __phys_to_pfn(IXP2000_SRAM0_PHYS_BASE), - .length = IXP2000_SRAM0_SIZE, - .type = MT_DEVICE, - }, { - .virtual = IXP2000_PCI_IO_VIRT_BASE, - .pfn = __phys_to_pfn(IXP2000_PCI_IO_PHYS_BASE), - .length = IXP2000_PCI_IO_SIZE, - .type = MT_DEVICE, - }, { - .virtual = IXP2000_PCI_CFG0_VIRT_BASE, - .pfn = __phys_to_pfn(IXP2000_PCI_CFG0_PHYS_BASE), - .length = IXP2000_PCI_CFG0_SIZE, - .type = MT_DEVICE, - }, { - .virtual = IXP2000_PCI_CFG1_VIRT_BASE, - .pfn = __phys_to_pfn(IXP2000_PCI_CFG1_PHYS_BASE), - .length = IXP2000_PCI_CFG1_SIZE, - .type = MT_DEVICE, - } -}; - -void __init ixp2000_map_io(void) -{ - iotable_init(ixp2000_io_desc, ARRAY_SIZE(ixp2000_io_desc)); - - /* Set slowport to 8-bit mode. */ - ixp2000_reg_wrb(IXP2000_SLOWPORT_FRM, 1); -} - - -/************************************************************************* - * Serial port support for IXP2000 - *************************************************************************/ -static struct plat_serial8250_port ixp2000_serial_port[] = { - { - .mapbase = IXP2000_UART_PHYS_BASE, - .membase = (char *)(IXP2000_UART_VIRT_BASE + 3), - .irq = IRQ_IXP2000_UART, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = 50000000, - }, - { }, -}; - -static struct resource ixp2000_uart_resource = { - .start = IXP2000_UART_PHYS_BASE, - .end = IXP2000_UART_PHYS_BASE + 0x1f, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device ixp2000_serial_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = ixp2000_serial_port, - }, - .num_resources = 1, - .resource = &ixp2000_uart_resource, -}; - -void __init ixp2000_uart_init(void) -{ - platform_device_register(&ixp2000_serial_device); -} - - -/************************************************************************* - * Timer-tick functions for IXP2000 - *************************************************************************/ -static unsigned ticks_per_jiffy; -static unsigned ticks_per_usec; -static unsigned next_jiffy_time; -static volatile unsigned long *missing_jiffy_timer_csr; - -unsigned long ixp2000_gettimeoffset (void) -{ - unsigned long offset; - - offset = next_jiffy_time - *missing_jiffy_timer_csr; - - return offset / ticks_per_usec; -} - -static irqreturn_t ixp2000_timer_interrupt(int irq, void *dev_id) -{ - /* clear timer 1 */ - ixp2000_reg_wrb(IXP2000_T1_CLR, 1); - - while ((signed long)(next_jiffy_time - *missing_jiffy_timer_csr) - >= ticks_per_jiffy) { - timer_tick(); - next_jiffy_time -= ticks_per_jiffy; - } - - return IRQ_HANDLED; -} - -static struct irqaction ixp2000_timer_irq = { - .name = "IXP2000 Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = ixp2000_timer_interrupt, -}; - -void __init ixp2000_init_time(unsigned long tick_rate) -{ - ticks_per_jiffy = (tick_rate + HZ/2) / HZ; - ticks_per_usec = tick_rate / 1000000; - - /* - * We use timer 1 as our timer interrupt. - */ - ixp2000_reg_write(IXP2000_T1_CLR, 0); - ixp2000_reg_write(IXP2000_T1_CLD, ticks_per_jiffy - 1); - ixp2000_reg_write(IXP2000_T1_CTL, (1 << 7)); - - /* - * We use a second timer as a monotonic counter for tracking - * missed jiffies. The IXP2000 has four timers, but if we're - * on an A-step IXP2800, timer 2 and 3 don't work, so on those - * chips we use timer 4. Timer 4 is the only timer that can - * be used for the watchdog, so we use timer 2 if we're on a - * non-buggy chip. - */ - if ((*IXP2000_PRODUCT_ID & 0x001ffef0) == 0x00000000) { - printk(KERN_INFO "Enabling IXP2800 erratum #25 workaround\n"); - - ixp2000_reg_write(IXP2000_T4_CLR, 0); - ixp2000_reg_write(IXP2000_T4_CLD, -1); - ixp2000_reg_wrb(IXP2000_T4_CTL, (1 << 7)); - missing_jiffy_timer_csr = IXP2000_T4_CSR; - } else { - ixp2000_reg_write(IXP2000_T2_CLR, 0); - ixp2000_reg_write(IXP2000_T2_CLD, -1); - ixp2000_reg_wrb(IXP2000_T2_CTL, (1 << 7)); - missing_jiffy_timer_csr = IXP2000_T2_CSR; - } - next_jiffy_time = 0xffffffff; - - /* register for interrupt */ - setup_irq(IRQ_IXP2000_TIMER1, &ixp2000_timer_irq); -} - -/************************************************************************* - * GPIO helpers - *************************************************************************/ -static unsigned long GPIO_IRQ_falling_edge; -static unsigned long GPIO_IRQ_rising_edge; -static unsigned long GPIO_IRQ_level_low; -static unsigned long GPIO_IRQ_level_high; - -static void update_gpio_int_csrs(void) -{ - ixp2000_reg_write(IXP2000_GPIO_FEDR, GPIO_IRQ_falling_edge); - ixp2000_reg_write(IXP2000_GPIO_REDR, GPIO_IRQ_rising_edge); - ixp2000_reg_write(IXP2000_GPIO_LSLR, GPIO_IRQ_level_low); - ixp2000_reg_wrb(IXP2000_GPIO_LSHR, GPIO_IRQ_level_high); -} - -void gpio_line_config(int line, int direction) -{ - unsigned long flags; - - local_irq_save(flags); - if (direction == GPIO_OUT) { - /* if it's an output, it ain't an interrupt anymore */ - GPIO_IRQ_falling_edge &= ~(1 << line); - GPIO_IRQ_rising_edge &= ~(1 << line); - GPIO_IRQ_level_low &= ~(1 << line); - GPIO_IRQ_level_high &= ~(1 << line); - update_gpio_int_csrs(); - - ixp2000_reg_wrb(IXP2000_GPIO_PDSR, 1 << line); - } else if (direction == GPIO_IN) { - ixp2000_reg_wrb(IXP2000_GPIO_PDCR, 1 << line); - } - local_irq_restore(flags); -} -EXPORT_SYMBOL(gpio_line_config); - - -/************************************************************************* - * IRQ handling IXP2000 - *************************************************************************/ -static void ixp2000_GPIO_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - int i; - unsigned long status = *IXP2000_GPIO_INST; - - for (i = 0; i <= 7; i++) { - if (status & (1<<i)) { - generic_handle_irq(i + IRQ_IXP2000_GPIO0); - } - } -} - -static int ixp2000_GPIO_irq_type(struct irq_data *d, unsigned int type) -{ - int line = d->irq - IRQ_IXP2000_GPIO0; - - /* - * First, configure this GPIO line as an input. - */ - ixp2000_reg_write(IXP2000_GPIO_PDCR, 1 << line); - - /* - * Then, set the proper trigger type. - */ - if (type & IRQ_TYPE_EDGE_FALLING) - GPIO_IRQ_falling_edge |= 1 << line; - else - GPIO_IRQ_falling_edge &= ~(1 << line); - if (type & IRQ_TYPE_EDGE_RISING) - GPIO_IRQ_rising_edge |= 1 << line; - else - GPIO_IRQ_rising_edge &= ~(1 << line); - if (type & IRQ_TYPE_LEVEL_LOW) - GPIO_IRQ_level_low |= 1 << line; - else - GPIO_IRQ_level_low &= ~(1 << line); - if (type & IRQ_TYPE_LEVEL_HIGH) - GPIO_IRQ_level_high |= 1 << line; - else - GPIO_IRQ_level_high &= ~(1 << line); - update_gpio_int_csrs(); - - return 0; -} - -static void ixp2000_GPIO_irq_mask_ack(struct irq_data *d) -{ - unsigned int irq = d->irq; - - ixp2000_reg_write(IXP2000_GPIO_INCR, (1 << (irq - IRQ_IXP2000_GPIO0))); - - ixp2000_reg_write(IXP2000_GPIO_EDSR, (1 << (irq - IRQ_IXP2000_GPIO0))); - ixp2000_reg_write(IXP2000_GPIO_LDSR, (1 << (irq - IRQ_IXP2000_GPIO0))); - ixp2000_reg_wrb(IXP2000_GPIO_INST, (1 << (irq - IRQ_IXP2000_GPIO0))); -} - -static void ixp2000_GPIO_irq_mask(struct irq_data *d) -{ - unsigned int irq = d->irq; - - ixp2000_reg_wrb(IXP2000_GPIO_INCR, (1 << (irq - IRQ_IXP2000_GPIO0))); -} - -static void ixp2000_GPIO_irq_unmask(struct irq_data *d) -{ - unsigned int irq = d->irq; - - ixp2000_reg_write(IXP2000_GPIO_INSR, (1 << (irq - IRQ_IXP2000_GPIO0))); -} - -static struct irq_chip ixp2000_GPIO_irq_chip = { - .irq_ack = ixp2000_GPIO_irq_mask_ack, - .irq_mask = ixp2000_GPIO_irq_mask, - .irq_unmask = ixp2000_GPIO_irq_unmask, - .irq_set_type = ixp2000_GPIO_irq_type, -}; - -static void ixp2000_pci_irq_mask(struct irq_data *d) -{ - unsigned long temp = *IXP2000_PCI_XSCALE_INT_ENABLE; - if (d->irq == IRQ_IXP2000_PCIA) - ixp2000_reg_wrb(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 26))); - else if (d->irq == IRQ_IXP2000_PCIB) - ixp2000_reg_wrb(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 27))); -} - -static void ixp2000_pci_irq_unmask(struct irq_data *d) -{ - unsigned long temp = *IXP2000_PCI_XSCALE_INT_ENABLE; - if (d->irq == IRQ_IXP2000_PCIA) - ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, (temp | (1 << 26))); - else if (d->irq == IRQ_IXP2000_PCIB) - ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, (temp | (1 << 27))); -} - -/* - * Error interrupts. These are used extensively by the microengine drivers - */ -static void ixp2000_err_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - int i; - unsigned long status = *IXP2000_IRQ_ERR_STATUS; - - for(i = 31; i >= 0; i--) { - if(status & (1 << i)) { - generic_handle_irq(IRQ_IXP2000_DRAM0_MIN_ERR + i); - } - } -} - -static void ixp2000_err_irq_mask(struct irq_data *d) -{ - ixp2000_reg_write(IXP2000_IRQ_ERR_ENABLE_CLR, - (1 << (d->irq - IRQ_IXP2000_DRAM0_MIN_ERR))); -} - -static void ixp2000_err_irq_unmask(struct irq_data *d) -{ - ixp2000_reg_write(IXP2000_IRQ_ERR_ENABLE_SET, - (1 << (d->irq - IRQ_IXP2000_DRAM0_MIN_ERR))); -} - -static struct irq_chip ixp2000_err_irq_chip = { - .irq_ack = ixp2000_err_irq_mask, - .irq_mask = ixp2000_err_irq_mask, - .irq_unmask = ixp2000_err_irq_unmask -}; - -static struct irq_chip ixp2000_pci_irq_chip = { - .irq_ack = ixp2000_pci_irq_mask, - .irq_mask = ixp2000_pci_irq_mask, - .irq_unmask = ixp2000_pci_irq_unmask -}; - -static void ixp2000_irq_mask(struct irq_data *d) -{ - ixp2000_reg_wrb(IXP2000_IRQ_ENABLE_CLR, (1 << d->irq)); -} - -static void ixp2000_irq_unmask(struct irq_data *d) -{ - ixp2000_reg_write(IXP2000_IRQ_ENABLE_SET, (1 << d->irq)); -} - -static struct irq_chip ixp2000_irq_chip = { - .irq_ack = ixp2000_irq_mask, - .irq_mask = ixp2000_irq_mask, - .irq_unmask = ixp2000_irq_unmask -}; - -void __init ixp2000_init_irq(void) -{ - int irq; - - /* - * Mask all sources - */ - ixp2000_reg_write(IXP2000_IRQ_ENABLE_CLR, 0xffffffff); - ixp2000_reg_write(IXP2000_FIQ_ENABLE_CLR, 0xffffffff); - - /* clear all GPIO edge/level detects */ - ixp2000_reg_write(IXP2000_GPIO_REDR, 0); - ixp2000_reg_write(IXP2000_GPIO_FEDR, 0); - ixp2000_reg_write(IXP2000_GPIO_LSHR, 0); - ixp2000_reg_write(IXP2000_GPIO_LSLR, 0); - ixp2000_reg_write(IXP2000_GPIO_INCR, -1); - - /* clear PCI interrupt sources */ - ixp2000_reg_wrb(IXP2000_PCI_XSCALE_INT_ENABLE, 0); - - /* - * Certain bits in the IRQ status register of the - * IXP2000 are reserved. Instead of trying to map - * things non 1:1 from bit position to IRQ number, - * we mark the reserved IRQs as invalid. This makes - * our mask/unmask code much simpler. - */ - for (irq = IRQ_IXP2000_SOFT_INT; irq <= IRQ_IXP2000_THDB3; irq++) { - if ((1 << irq) & IXP2000_VALID_IRQ_MASK) { - irq_set_chip_and_handler(irq, &ixp2000_irq_chip, - handle_level_irq); - set_irq_flags(irq, IRQF_VALID); - } else set_irq_flags(irq, 0); - } - - for (irq = IRQ_IXP2000_DRAM0_MIN_ERR; irq <= IRQ_IXP2000_SP_INT; irq++) { - if((1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR)) & - IXP2000_VALID_ERR_IRQ_MASK) { - irq_set_chip_and_handler(irq, &ixp2000_err_irq_chip, - handle_level_irq); - set_irq_flags(irq, IRQF_VALID); - } - else - set_irq_flags(irq, 0); - } - irq_set_chained_handler(IRQ_IXP2000_ERRSUM, ixp2000_err_irq_handler); - - for (irq = IRQ_IXP2000_GPIO0; irq <= IRQ_IXP2000_GPIO7; irq++) { - irq_set_chip_and_handler(irq, &ixp2000_GPIO_irq_chip, - handle_level_irq); - set_irq_flags(irq, IRQF_VALID); - } - irq_set_chained_handler(IRQ_IXP2000_GPIO, ixp2000_GPIO_irq_handler); - - /* - * Enable PCI irqs. The actual PCI[AB] decoding is done in - * entry-macro.S, so we don't need a chained handler for the - * PCI interrupt source. - */ - ixp2000_reg_write(IXP2000_IRQ_ENABLE_SET, (1 << IRQ_IXP2000_PCI)); - for (irq = IRQ_IXP2000_PCIA; irq <= IRQ_IXP2000_PCIB; irq++) { - irq_set_chip_and_handler(irq, &ixp2000_pci_irq_chip, - handle_level_irq); - set_irq_flags(irq, IRQF_VALID); - } -} - -void ixp2000_restart(char mode, const char *cmd) -{ - ixp2000_reg_wrb(IXP2000_RESET0, RSTALL); -} diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c deleted file mode 100644 index 4867f408617..00000000000 --- a/arch/arm/mach-ixp2000/enp2611.c +++ /dev/null @@ -1,265 +0,0 @@ -/* - * arch/arm/mach-ixp2000/enp2611.c - * - * Radisys ENP-2611 support. - * - * Created 2004 by Lennert Buytenhek from the ixdp2x01 code. The - * original version carries the following notices: - * - * Original Author: Andrzej Mialkowski <andrzej.mialkowski@intel.com> - * Maintainer: Deepak Saxena <dsaxena@plexity.net> - * - * Copyright (C) 2002-2003 Intel Corp. - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/bitops.h> -#include <linux/pci.h> -#include <linux/ioport.h> -#include <linux/delay.h> -#include <linux/serial.h> -#include <linux/tty.h> -#include <linux/serial_core.h> -#include <linux/platform_device.h> -#include <linux/io.h> - -#include <asm/irq.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <mach/hardware.h> -#include <asm/mach-types.h> - -#include <asm/mach/pci.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> -#include <asm/mach/time.h> -#include <asm/mach/arch.h> -#include <asm/mach/flash.h> - -/************************************************************************* - * ENP-2611 timer tick configuration - *************************************************************************/ -static void __init enp2611_timer_init(void) -{ - ixp2000_init_time(50 * 1000 * 1000); -} - -static struct sys_timer enp2611_timer = { - .init = enp2611_timer_init, - .offset = ixp2000_gettimeoffset, -}; - - -/************************************************************************* - * ENP-2611 I/O - *************************************************************************/ -static struct map_desc enp2611_io_desc[] __initdata = { - { - .virtual = ENP2611_CALEB_VIRT_BASE, - .pfn = __phys_to_pfn(ENP2611_CALEB_PHYS_BASE), - .length = ENP2611_CALEB_SIZE, - .type = MT_DEVICE, - }, { - .virtual = ENP2611_PM3386_0_VIRT_BASE, - .pfn = __phys_to_pfn(ENP2611_PM3386_0_PHYS_BASE), - .length = ENP2611_PM3386_0_SIZE, - .type = MT_DEVICE, - }, { - .virtual = ENP2611_PM3386_1_VIRT_BASE, - .pfn = __phys_to_pfn(ENP2611_PM3386_1_PHYS_BASE), - .length = ENP2611_PM3386_1_SIZE, - .type = MT_DEVICE, - } -}; - -void __init enp2611_map_io(void) -{ - ixp2000_map_io(); - iotable_init(enp2611_io_desc, ARRAY_SIZE(enp2611_io_desc)); -} - - -/************************************************************************* - * ENP-2611 PCI - *************************************************************************/ -static int enp2611_pci_setup(int nr, struct pci_sys_data *sys) -{ - sys->mem_offset = 0xe0000000; - ixp2000_pci_setup(nr, sys); - return 1; -} - -static void __init enp2611_pci_preinit(void) -{ - ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00100000); - ixp2000_pci_preinit(); - pcibios_setup("firmware"); -} - -static inline int enp2611_pci_valid_device(struct pci_bus *bus, - unsigned int devfn) -{ - /* The 82559 ethernet controller appears at both PCI:1:0:0 and - * PCI:1:2:0, so let's pretend the second one isn't there. - */ - if (bus->number == 0x01 && devfn == 0x10) - return 0; - - return 1; -} - -static int enp2611_pci_read_config(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 *value) -{ - if (enp2611_pci_valid_device(bus, devfn)) - return ixp2000_pci_read_config(bus, devfn, where, size, value); - - return PCIBIOS_DEVICE_NOT_FOUND; -} - -static int enp2611_pci_write_config(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 value) -{ - if (enp2611_pci_valid_device(bus, devfn)) - return ixp2000_pci_write_config(bus, devfn, where, size, value); - - return PCIBIOS_DEVICE_NOT_FOUND; -} - -static struct pci_ops enp2611_pci_ops = { - .read = enp2611_pci_read_config, - .write = enp2611_pci_write_config -}; - -static struct pci_bus * __init enp2611_pci_scan_bus(int nr, - struct pci_sys_data *sys) -{ - return pci_scan_root_bus(NULL, sys->busnr, &enp2611_pci_ops, sys, - &sys->resources); -} - -static int __init enp2611_pci_map_irq(const struct pci_dev *dev, u8 slot, - u8 pin) -{ - int irq; - - if (dev->bus->number == 0 && PCI_SLOT(dev->devfn) == 0) { - /* IXP2400. */ - irq = IRQ_IXP2000_PCIA; - } else if (dev->bus->number == 0 && PCI_SLOT(dev->devfn) == 1) { - /* 21555 non-transparent bridge. */ - irq = IRQ_IXP2000_PCIB; - } else if (dev->bus->number == 0 && PCI_SLOT(dev->devfn) == 4) { - /* PCI2050B transparent bridge. */ - irq = -1; - } else if (dev->bus->number == 1 && PCI_SLOT(dev->devfn) == 0) { - /* 82559 ethernet. */ - irq = IRQ_IXP2000_PCIA; - } else if (dev->bus->number == 1 && PCI_SLOT(dev->devfn) == 1) { - /* SPI-3 option board. */ - irq = IRQ_IXP2000_PCIB; - } else { - printk(KERN_ERR "enp2611_pci_map_irq() called for unknown " - "device PCI:%d:%d:%d\n", dev->bus->number, - PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)); - irq = -1; - } - - return irq; -} - -struct hw_pci enp2611_pci __initdata = { - .nr_controllers = 1, - .setup = enp2611_pci_setup, - .preinit = enp2611_pci_preinit, - .scan = enp2611_pci_scan_bus, - .map_irq = enp2611_pci_map_irq, -}; - -int __init enp2611_pci_init(void) -{ - if (machine_is_enp2611()) - pci_common_init(&enp2611_pci); - - return 0; -} - -subsys_initcall(enp2611_pci_init); - - -/************************************************************************* - * ENP-2611 Machine Initialization - *************************************************************************/ -static struct flash_platform_data enp2611_flash_platform_data = { - .map_name = "cfi_probe", - .width = 1, -}; - -static struct ixp2000_flash_data enp2611_flash_data = { - .platform_data = &enp2611_flash_platform_data, - .nr_banks = 1 -}; - -static struct resource enp2611_flash_resource = { - .start = 0xc4000000, - .end = 0xc4000000 + 0x00ffffff, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device enp2611_flash = { - .name = "IXP2000-Flash", - .id = 0, - .dev = { - .platform_data = &enp2611_flash_data, - }, - .num_resources = 1, - .resource = &enp2611_flash_resource, -}; - -static struct ixp2000_i2c_pins enp2611_i2c_gpio_pins = { - .sda_pin = ENP2611_GPIO_SDA, - .scl_pin = ENP2611_GPIO_SCL, -}; - -static struct platform_device enp2611_i2c_controller = { - .name = "IXP2000-I2C", - .id = 0, - .dev = { - .platform_data = &enp2611_i2c_gpio_pins - }, - .num_resources = 0 -}; - -static struct platform_device *enp2611_devices[] __initdata = { - &enp2611_flash, - &enp2611_i2c_controller -}; - -static void __init enp2611_init_machine(void) -{ - platform_add_devices(enp2611_devices, ARRAY_SIZE(enp2611_devices)); - ixp2000_uart_init(); -} - - -MACHINE_START(ENP2611, "Radisys ENP-2611 PCI network processor board") - /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .atag_offset = 0x100, - .map_io = enp2611_map_io, - .init_irq = ixp2000_init_irq, - .timer = &enp2611_timer, - .init_machine = enp2611_init_machine, - .restart = ixp2000_restart, -MACHINE_END - - diff --git a/arch/arm/mach-ixp2000/include/mach/debug-macro.S b/arch/arm/mach-ixp2000/include/mach/debug-macro.S deleted file mode 100644 index bdd3ccdc289..00000000000 --- a/arch/arm/mach-ixp2000/include/mach/debug-macro.S +++ /dev/null @@ -1,25 +0,0 @@ -/* arch/arm/mach-ixp2000/include/mach/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - - .macro addruart, rp, rv, tmp - mov \rp, #0x00030000 -#ifdef __ARMEB__ - orr \rp, \rp, #0x00000003 -#endif - orr \rv, \rp, #0xfe000000 @ virtual base - orr \rv, \rv, #0x00f00000 - orr \rp, \rp, #0xc0000000 @ Physical base - .endm - -#define UART_SHIFT 2 -#include <asm/hardware/debug-8250.S> diff --git a/arch/arm/mach-ixp2000/include/mach/enp2611.h b/arch/arm/mach-ixp2000/include/mach/enp2611.h deleted file mode 100644 index 9ce3690061d..00000000000 --- a/arch/arm/mach-ixp2000/include/mach/enp2611.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * arch/arm/mach-ixp2000/include/mach/enp2611.h - * - * Register and other defines for Radisys ENP-2611 - * - * Created 2004 by Lennert Buytenhek from the ixdp2x01 code. The - * original version carries the following notices: - * - * Original Author: Naeem Afzal <naeem.m.afzal@intel.com> - * Maintainer: Deepak Saxena <dsaxena@plexity.net> - * - * Copyright (C) 2002 Intel Corp. - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __ENP2611_H -#define __ENP2611_H - -#define ENP2611_CALEB_PHYS_BASE 0xc5000000 -#define ENP2611_CALEB_VIRT_BASE 0xfe000000 -#define ENP2611_CALEB_SIZE 0x00100000 - -#define ENP2611_PM3386_0_PHYS_BASE 0xc6000000 -#define ENP2611_PM3386_0_VIRT_BASE 0xfe100000 -#define ENP2611_PM3386_0_SIZE 0x00100000 - -#define ENP2611_PM3386_1_PHYS_BASE 0xc6400000 -#define ENP2611_PM3386_1_VIRT_BASE 0xfe200000 -#define ENP2611_PM3386_1_SIZE 0x00100000 - -#define ENP2611_GPIO_SCL 7 -#define ENP2611_GPIO_SDA 6 - -#define IRQ_ENP2611_THERMAL IRQ_IXP2000_GPIO4 -#define IRQ_ENP2611_OPTION_BOARD IRQ_IXP2000_GPIO3 -#define IRQ_ENP2611_CALEB IRQ_IXP2000_GPIO2 -#define IRQ_ENP2611_PM3386_1 IRQ_IXP2000_GPIO1 -#define IRQ_ENP2611_PM3386_0 IRQ_IXP2000_GPIO0 - - -#endif diff --git a/arch/arm/mach-ixp2000/include/mach/entry-macro.S b/arch/arm/mach-ixp2000/include/mach/entry-macro.S deleted file mode 100644 index c4444dff920..00000000000 --- a/arch/arm/mach-ixp2000/include/mach/entry-macro.S +++ /dev/null @@ -1,54 +0,0 @@ -/* - * arch/arm/mach-ixp2000/include/mach/entry-macro.S - * - * Low-level IRQ helper macros for IXP2000-based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include <mach/irqs.h> - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - - mov \irqnr, #0x0 @clear out irqnr as default - mov \base, #0xfe000000 - orr \base, \base, #0x00e00000 - orr \base, \base, #0x08 - ldr \irqstat, [\base] @ get interrupts - - cmp \irqstat, #0 - beq 1001f - - clz \irqnr, \irqstat - mov \base, #31 - subs \irqnr, \base, \irqnr - - /* - * We handle PCIA and PCIB here so we don't have an - * extra layer of code just to check these two bits. - */ - cmp \irqnr, #IRQ_IXP2000_PCI - bne 1001f - - mov \base, #0xfe000000 - orr \base, \base, #0x00c00000 - orr \base, \base, #0x00000100 - orr \base, \base, #0x00000058 - ldr \irqstat, [\base] - - mov \tmp, #(1<<26) - tst \irqstat, \tmp - movne \irqnr, #IRQ_IXP2000_PCIA - bne 1001f - - mov \tmp, #(1<<27) - tst \irqstat, \tmp - movne \irqnr, #IRQ_IXP2000_PCIB - -1001: - .endm - diff --git a/arch/arm/mach-ixp2000/include/mach/gpio-ixp2000.h b/arch/arm/mach-ixp2000/include/mach/gpio-ixp2000.h deleted file mode 100644 index af836c76c3f..00000000000 --- a/arch/arm/mach-ixp2000/include/mach/gpio-ixp2000.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * arch/arm/mach-ixp2000/include/mach/gpio.h - * - * Copyright (C) 2002 Intel Corporation. - * - * This program is free software, you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -/* - * IXP2000 GPIO in/out, edge/level detection for IRQs: - * IRQs are generated on Falling-edge, Rising-Edge, Level-low, Level-High - * or both Falling-edge and Rising-edge. - * This must be called *before* the corresponding IRQ is registerd. - * Use this instead of directly setting the GPIO registers. - * GPIOs may also be used as GPIOs (e.g. for emulating i2c/smb) - */ -#ifndef __ASM_ARCH_GPIO_H -#define __ASM_ARCH_GPIO_H - -#ifndef __ASSEMBLY__ - -#define GPIO_IN 0 -#define GPIO_OUT 1 - -#define IXP2000_GPIO_LOW 0 -#define IXP2000_GPIO_HIGH 1 - -extern void gpio_line_config(int line, int direction); - -static inline int gpio_line_get(int line) -{ - return (((*IXP2000_GPIO_PLR) >> line) & 1); -} - -static inline void gpio_line_set(int line, int value) -{ - if (value == IXP2000_GPIO_HIGH) { - ixp2000_reg_write(IXP2000_GPIO_POSR, 1 << line); - } else if (value == IXP2000_GPIO_LOW) { - ixp2000_reg_write(IXP2000_GPIO_POCR, 1 << line); - } -} - -#endif /* !__ASSEMBLY__ */ - -#endif /* ASM_ARCH_IXP2000_GPIO_H_ */ diff --git a/arch/arm/mach-ixp2000/include/mach/hardware.h b/arch/arm/mach-ixp2000/include/mach/hardware.h deleted file mode 100644 index cdaf1db8400..00000000000 --- a/arch/arm/mach-ixp2000/include/mach/hardware.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * arch/arm/mach-ixp2000/include/mach/hardware.h - * - * Hardware definitions for IXP2400/2800 based systems - * - * Original Author: Naeem M Afzal <naeem.m.afzal@intel.com> - * - * Maintainer: Deepak Saxena <dsaxena@mvista.com> - * - * Copyright (C) 2001-2002 Intel Corp. - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __ASM_ARCH_HARDWARE_H__ -#define __ASM_ARCH_HARDWARE_H__ - -#include "ixp2000-regs.h" /* Chipset Registers */ - -/* - * Platform helper functions - */ -#include "platform.h" - -/* - * Platform-specific bits - */ -#include "enp2611.h" /* ENP-2611 */ -#include "ixdp2x00.h" /* IXDP2400/2800 */ -#include "ixdp2x01.h" /* IXDP2401/2801 */ - -#endif /* _ASM_ARCH_HARDWARE_H__ */ diff --git a/arch/arm/mach-ixp2000/include/mach/io.h b/arch/arm/mach-ixp2000/include/mach/io.h deleted file mode 100644 index f6552d6f35a..00000000000 --- a/arch/arm/mach-ixp2000/include/mach/io.h +++ /dev/null @@ -1,133 +0,0 @@ -/* - * arch/arm/mach-ixp2000/include/mach/io.h - * - * Original Author: Naeem M Afzal <naeem.m.afzal@intel.com> - * Maintainer: Deepak Saxena <dsaxena@plexity.net> - * - * Copyright (C) 2002 Intel Corp. - * Copyrgiht (C) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#include <mach/hardware.h> - -#define IO_SPACE_LIMIT 0xffffffff - -/* - * The A? revisions of the IXP2000s assert byte lanes for PCI I/O - * transactions the other way round (MEM transactions don't have this - * issue), so if we want to support those models, we need to override - * the standard I/O functions. - * - * B0 and later have a bit that can be set to 1 to get the proper - * behavior for I/O transactions, which then allows us to use the - * standard I/O functions. This is what we do if the user does not - * explicitly ask for support for pre-B0. - */ -#ifdef CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO -#define ___io(p) ((void __iomem *)((p)+IXP2000_PCI_IO_VIRT_BASE)) - -#define alignb(addr) (void __iomem *)((unsigned long)(addr) ^ 3) -#define alignw(addr) (void __iomem *)((unsigned long)(addr) ^ 2) - -#define outb(v,p) __raw_writeb((v),alignb(___io(p))) -#define outw(v,p) __raw_writew((v),alignw(___io(p))) -#define outl(v,p) __raw_writel((v),___io(p)) - -#define inb(p) ({ unsigned int __v = __raw_readb(alignb(___io(p))); __v; }) -#define inw(p) \ - ({ unsigned int __v = (__raw_readw(alignw(___io(p)))); __v; }) -#define inl(p) \ - ({ unsigned int __v = (__raw_readl(___io(p))); __v; }) - -#define outsb(p,d,l) __raw_writesb(alignb(___io(p)),d,l) -#define outsw(p,d,l) __raw_writesw(alignw(___io(p)),d,l) -#define outsl(p,d,l) __raw_writesl(___io(p),d,l) - -#define insb(p,d,l) __raw_readsb(alignb(___io(p)),d,l) -#define insw(p,d,l) __raw_readsw(alignw(___io(p)),d,l) -#define insl(p,d,l) __raw_readsl(___io(p),d,l) - -#define __is_io_address(p) ((((unsigned long)(p)) & ~(IXP2000_PCI_IO_SIZE - 1)) == IXP2000_PCI_IO_VIRT_BASE) - -#define ioread8(p) \ - ({ \ - unsigned int __v; \ - \ - if (__is_io_address(p)) { \ - __v = __raw_readb(alignb(p)); \ - } else { \ - __v = __raw_readb(p); \ - } \ - \ - __v; \ - }) \ - -#define ioread16(p) \ - ({ \ - unsigned int __v; \ - \ - if (__is_io_address(p)) { \ - __v = __raw_readw(alignw(p)); \ - } else { \ - __v = le16_to_cpu(__raw_readw(p)); \ - } \ - \ - __v; \ - }) - -#define ioread32(p) \ - ({ \ - unsigned int __v; \ - \ - if (__is_io_address(p)) { \ - __v = __raw_readl(p); \ - } else { \ - __v = le32_to_cpu(__raw_readl(p)); \ - } \ - \ - __v; \ - }) - -#define iowrite8(v,p) \ - ({ \ - if (__is_io_address(p)) { \ - __raw_writeb((v), alignb(p)); \ - } else { \ - __raw_writeb((v), p); \ - } \ - }) - -#define iowrite16(v,p) \ - ({ \ - if (__is_io_address(p)) { \ - __raw_writew((v), alignw(p)); \ - } else { \ - __raw_writew(cpu_to_le16(v), p); \ - } \ - }) - -#define iowrite32(v,p) \ - ({ \ - if (__is_io_address(p)) { \ - __raw_writel((v), p); \ - } else { \ - __raw_writel(cpu_to_le32(v), p); \ - } \ - }) - -#define ioport_map(port, nr) ___io(port) - -#define ioport_unmap(addr) -#else -#define __io(p) ((void __iomem *)((p)+IXP2000_PCI_IO_VIRT_BASE)) -#endif - - -#endif diff --git a/arch/arm/mach-ixp2000/include/mach/irqs.h b/arch/arm/mach-ixp2000/include/mach/irqs.h deleted file mode 100644 index bee96bcafdc..00000000000 --- a/arch/arm/mach-ixp2000/include/mach/irqs.h +++ /dev/null @@ -1,207 +0,0 @@ -/* - * arch/arm/mach-ixp2000/include/mach/irqs.h - * - * Original Author: Naeem Afzal <naeem.m.afzal@intel.com> - * Maintainer: Deepak Saxena <dsaxena@plexity.net> - * - * Copyright (C) 2002 Intel Corp. - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef _IRQS_H -#define _IRQS_H - -/* - * Do NOT add #ifdef MACHINE_FOO in here. - * Simpy add your machine IRQs here and increase NR_IRQS if needed to - * hold your machine's IRQ table. - */ - -/* - * Some interrupt numbers go unused b/c the IRQ mask/ummask/status - * register has those bit reserved. We just mark those interrupts - * as invalid and this allows us to do mask/unmask with a single - * shift operation instead of having to map the IRQ number to - * a HW IRQ number. - */ -#define IRQ_IXP2000_SOFT_INT 0 /* soft interrupt */ -#define IRQ_IXP2000_ERRSUM 1 /* OR of all bits in ErrorStatus reg*/ -#define IRQ_IXP2000_UART 2 -#define IRQ_IXP2000_GPIO 3 -#define IRQ_IXP2000_TIMER1 4 -#define IRQ_IXP2000_TIMER2 5 -#define IRQ_IXP2000_TIMER3 6 -#define IRQ_IXP2000_TIMER4 7 -#define IRQ_IXP2000_PMU 8 -#define IRQ_IXP2000_SPF 9 /* Slow port framer IRQ */ -#define IRQ_IXP2000_DMA1 10 -#define IRQ_IXP2000_DMA2 11 -#define IRQ_IXP2000_DMA3 12 -#define IRQ_IXP2000_PCI_DOORBELL 13 -#define IRQ_IXP2000_ME_ATTN 14 -#define IRQ_IXP2000_PCI 15 /* PCI INTA or INTB */ -#define IRQ_IXP2000_THDA0 16 /* thread 0-31A */ -#define IRQ_IXP2000_THDA1 17 /* thread 32-63A, IXP2800 only */ -#define IRQ_IXP2000_THDA2 18 /* thread 64-95A */ -#define IRQ_IXP2000_THDA3 19 /* thread 96-127A, IXP2800 only */ -#define IRQ_IXP2000_THDB0 24 /* thread 0-31B */ -#define IRQ_IXP2000_THDB1 25 /* thread 32-63B, IXP2800 only */ -#define IRQ_IXP2000_THDB2 26 /* thread 64-95B */ -#define IRQ_IXP2000_THDB3 27 /* thread 96-127B, IXP2800 only */ - -/* define generic GPIOs */ -#define IRQ_IXP2000_GPIO0 32 -#define IRQ_IXP2000_GPIO1 33 -#define IRQ_IXP2000_GPIO2 34 -#define IRQ_IXP2000_GPIO3 35 -#define IRQ_IXP2000_GPIO4 36 -#define IRQ_IXP2000_GPIO5 37 -#define IRQ_IXP2000_GPIO6 38 -#define IRQ_IXP2000_GPIO7 39 - -/* split off the 2 PCI sources */ -#define IRQ_IXP2000_PCIA 40 -#define IRQ_IXP2000_PCIB 41 - -/* Int sources from IRQ_ERROR_STATUS */ -#define IRQ_IXP2000_DRAM0_MIN_ERR 42 -#define IRQ_IXP2000_DRAM0_MAJ_ERR 43 -#define IRQ_IXP2000_DRAM1_MIN_ERR 44 -#define IRQ_IXP2000_DRAM1_MAJ_ERR 45 -#define IRQ_IXP2000_DRAM2_MIN_ERR 46 -#define IRQ_IXP2000_DRAM2_MAJ_ERR 47 -/* 48-57 reserved */ -#define IRQ_IXP2000_SRAM0_ERR 58 -#define IRQ_IXP2000_SRAM1_ERR 59 -#define IRQ_IXP2000_SRAM2_ERR 60 -#define IRQ_IXP2000_SRAM3_ERR 61 -/* 62-65 reserved */ -#define IRQ_IXP2000_MEDIA_ERR 66 -#define IRQ_IXP2000_PCI_ERR 67 -#define IRQ_IXP2000_SP_INT 68 - -#define NR_IXP2000_IRQS 69 - -#define IXP2000_BOARD_IRQ(x) (NR_IXP2000_IRQS + (x)) - -#define IXP2000_BOARD_IRQ_MASK(irq) (1 << (irq - NR_IXP2000_IRQS)) - -#define IXP2000_ERR_IRQ_MASK(irq) ( 1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR)) -#define IXP2000_VALID_ERR_IRQ_MASK (\ - IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM0_MIN_ERR) | \ - IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM0_MAJ_ERR) | \ - IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM1_MIN_ERR) | \ - IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM1_MAJ_ERR) | \ - IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM2_MIN_ERR) | \ - IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM2_MAJ_ERR) | \ - IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM0_ERR) | \ - IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM1_ERR) | \ - IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM2_ERR) | \ - IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM3_ERR) | \ - IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_MEDIA_ERR) | \ - IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_PCI_ERR) | \ - IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SP_INT) ) - -/* - * This allows for all the on-chip sources plus up to 32 CPLD based - * IRQs. Should be more than enough. - */ -#define IXP2000_BOARD_IRQS 32 -#define NR_IRQS (NR_IXP2000_IRQS + IXP2000_BOARD_IRQS) - - -/* - * IXDP2400 specific IRQs - */ -#define IRQ_IXDP2400_INGRESS_NPU IXP2000_BOARD_IRQ(0) -#define IRQ_IXDP2400_ENET IXP2000_BOARD_IRQ(1) -#define IRQ_IXDP2400_MEDIA_PCI IXP2000_BOARD_IRQ(2) -#define IRQ_IXDP2400_MEDIA_SP IXP2000_BOARD_IRQ(3) -#define IRQ_IXDP2400_SF_PCI IXP2000_BOARD_IRQ(4) -#define IRQ_IXDP2400_SF_SP IXP2000_BOARD_IRQ(5) -#define IRQ_IXDP2400_PMC IXP2000_BOARD_IRQ(6) -#define IRQ_IXDP2400_TVM IXP2000_BOARD_IRQ(7) - -#define NR_IXDP2400_IRQS ((IRQ_IXDP2400_TVM)+1) -#define IXDP2400_NR_IRQS NR_IXDP2400_IRQS - NR_IXP2000_IRQS - -/* IXDP2800 specific IRQs */ -#define IRQ_IXDP2800_EGRESS_ENET IXP2000_BOARD_IRQ(0) -#define IRQ_IXDP2800_INGRESS_NPU IXP2000_BOARD_IRQ(1) -#define IRQ_IXDP2800_PMC IXP2000_BOARD_IRQ(2) -#define IRQ_IXDP2800_FABRIC_PCI IXP2000_BOARD_IRQ(3) -#define IRQ_IXDP2800_FABRIC IXP2000_BOARD_IRQ(4) -#define IRQ_IXDP2800_MEDIA IXP2000_BOARD_IRQ(5) - -#define NR_IXDP2800_IRQS ((IRQ_IXDP2800_MEDIA)+1) -#define IXDP2800_NR_IRQS NR_IXDP2800_IRQS - NR_IXP2000_IRQS - -/* - * IRQs on both IXDP2x01 boards - */ -#define IRQ_IXDP2X01_SPCI_DB_0 IXP2000_BOARD_IRQ(2) -#define IRQ_IXDP2X01_SPCI_DB_1 IXP2000_BOARD_IRQ(3) -#define IRQ_IXDP2X01_SPCI_PMC_INTA IXP2000_BOARD_IRQ(4) -#define IRQ_IXDP2X01_SPCI_PMC_INTB IXP2000_BOARD_IRQ(5) -#define IRQ_IXDP2X01_SPCI_PMC_INTC IXP2000_BOARD_IRQ(6) -#define IRQ_IXDP2X01_SPCI_PMC_INTD IXP2000_BOARD_IRQ(7) -#define IRQ_IXDP2X01_SPCI_FIC_INT IXP2000_BOARD_IRQ(8) -#define IRQ_IXDP2X01_IPMI_FROM IXP2000_BOARD_IRQ(16) -#define IRQ_IXDP2X01_125US IXP2000_BOARD_IRQ(17) -#define IRQ_IXDP2X01_DB_0_ADD IXP2000_BOARD_IRQ(18) -#define IRQ_IXDP2X01_DB_1_ADD IXP2000_BOARD_IRQ(19) -#define IRQ_IXDP2X01_UART1 IXP2000_BOARD_IRQ(21) -#define IRQ_IXDP2X01_UART2 IXP2000_BOARD_IRQ(22) -#define IRQ_IXDP2X01_FIC_ADD_INT IXP2000_BOARD_IRQ(24) -#define IRQ_IXDP2X01_CS8900 IXP2000_BOARD_IRQ(25) -#define IRQ_IXDP2X01_BBSRAM IXP2000_BOARD_IRQ(26) - -#define IXDP2X01_VALID_IRQ_MASK ( \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_DB_0) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_DB_1) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTA) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTB) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTC) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTD) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_FIC_INT) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_IPMI_FROM) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_125US) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_DB_0_ADD) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_DB_1_ADD) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_UART1) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_UART2) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_FIC_ADD_INT) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_CS8900) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_BBSRAM) ) - -/* - * IXDP2401 specific IRQs - */ -#define IRQ_IXDP2401_INTA_82546 IXP2000_BOARD_IRQ(0) -#define IRQ_IXDP2401_INTB_82546 IXP2000_BOARD_IRQ(1) - -#define IXDP2401_VALID_IRQ_MASK ( \ - IXDP2X01_VALID_IRQ_MASK | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2401_INTA_82546) |\ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2401_INTB_82546)) - -/* - * IXDP2801-specific IRQs - */ -#define IRQ_IXDP2801_RIV IXP2000_BOARD_IRQ(0) -#define IRQ_IXDP2801_CNFG_MEDIA IXP2000_BOARD_IRQ(27) -#define IRQ_IXDP2801_CLOCK_REF IXP2000_BOARD_IRQ(28) - -#define IXDP2801_VALID_IRQ_MASK ( \ - IXDP2X01_VALID_IRQ_MASK | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_RIV) |\ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_CNFG_MEDIA) |\ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_CLOCK_REF)) - -#define NR_IXDP2X01_IRQS ((IRQ_IXDP2801_CLOCK_REF) + 1) - -#endif /*_IRQS_H*/ diff --git a/arch/arm/mach-ixp2000/include/mach/ixdp2x00.h b/arch/arm/mach-ixp2000/include/mach/ixdp2x00.h deleted file mode 100644 index 5df8479d948..00000000000 --- a/arch/arm/mach-ixp2000/include/mach/ixdp2x00.h +++ /dev/null @@ -1,92 +0,0 @@ -/* - * arch/arm/mach-ixp2000/include/mach/ixdp2x00.h - * - * Register and other defines for IXDP2[48]00 platforms - * - * Original Author: Naeem Afzal <naeem.m.afzal@intel.com> - * Maintainer: Deepak Saxena <dsaxena@plexity.net> - * - * Copyright (C) 2002 Intel Corp. - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#ifndef _IXDP2X00_H_ -#define _IXDP2X00_H_ - -/* - * On board CPLD memory map - */ -#define IXDP2X00_PHYS_CPLD_BASE 0xc7000000 -#define IXDP2X00_VIRT_CPLD_BASE 0xfe000000 -#define IXDP2X00_CPLD_SIZE 0x00100000 - - -#define IXDP2X00_CPLD_REG(x) \ - (volatile unsigned long *)(IXDP2X00_VIRT_CPLD_BASE | x) - -/* - * IXDP2400 CPLD registers - */ -#define IXDP2400_CPLD_SYSLED IXDP2X00_CPLD_REG(0x0) -#define IXDP2400_CPLD_DISP_DATA IXDP2X00_CPLD_REG(0x4) -#define IXDP2400_CPLD_CLOCK_SPEED IXDP2X00_CPLD_REG(0x8) -#define IXDP2400_CPLD_INT_STAT IXDP2X00_CPLD_REG(0xc) -#define IXDP2400_CPLD_REV IXDP2X00_CPLD_REG(0x10) -#define IXDP2400_CPLD_SYS_CLK_M IXDP2X00_CPLD_REG(0x14) -#define IXDP2400_CPLD_SYS_CLK_N IXDP2X00_CPLD_REG(0x18) -#define IXDP2400_CPLD_INT_MASK IXDP2X00_CPLD_REG(0x48) - -/* - * IXDP2800 CPLD registers - */ -#define IXDP2800_CPLD_INT_STAT IXDP2X00_CPLD_REG(0x0) -#define IXDP2800_CPLD_INT_MASK IXDP2X00_CPLD_REG(0x140) - - -#define IXDP2X00_GPIO_I2C_ENABLE 0x02 -#define IXDP2X00_GPIO_SCL 0x07 -#define IXDP2X00_GPIO_SDA 0x06 - -/* - * PCI devfns for on-board devices. We need these to be able to - * properly translate IRQs and for device removal. - */ -#define IXDP2400_SLAVE_ENET_DEVFN 0x18 /* Bus 1 */ -#define IXDP2400_MASTER_ENET_DEVFN 0x20 /* Bus 1 */ -#define IXDP2400_MEDIA_DEVFN 0x28 /* Bus 1 */ -#define IXDP2400_SWITCH_FABRIC_DEVFN 0x30 /* Bus 1 */ - -#define IXDP2800_SLAVE_ENET_DEVFN 0x20 /* Bus 1 */ -#define IXDP2800_MASTER_ENET_DEVFN 0x18 /* Bus 1 */ -#define IXDP2800_SWITCH_FABRIC_DEVFN 0x30 /* Bus 1 */ - -#define IXDP2X00_P2P_DEVFN 0x20 /* Bus 0 */ -#define IXDP2X00_21555_DEVFN 0x30 /* Bus 0 */ -#define IXDP2X00_SLAVE_NPU_DEVFN 0x28 /* Bus 1 */ -#define IXDP2X00_PMC_DEVFN 0x38 /* Bus 1 */ -#define IXDP2X00_MASTER_NPU_DEVFN 0x38 /* Bus 1 */ - -#ifndef __ASSEMBLY__ -/* - * The master NPU is always PCI master. - */ -static inline unsigned int ixdp2x00_master_npu(void) -{ - return !!ixp2000_is_pcimaster(); -} - -/* - * Helper functions used by ixdp2400 and ixdp2800 specific code - */ -void ixdp2x00_init_irq(volatile unsigned long*, volatile unsigned long *, unsigned long); -void ixdp2x00_slave_pci_postinit(void); -void ixdp2x00_init_machine(void); -void ixdp2x00_map_io(void); - -#endif - -#endif /*_IXDP2X00_H_ */ diff --git a/arch/arm/mach-ixp2000/include/mach/ixdp2x01.h b/arch/arm/mach-ixp2000/include/mach/ixdp2x01.h deleted file mode 100644 index 4c1f04083e5..00000000000 --- a/arch/arm/mach-ixp2000/include/mach/ixdp2x01.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - * arch/arm/mach-ixp2000/include/mach/ixdp2x01.h - * - * Platform definitions for IXDP2X01 && IXDP2801 systems - * - * Author: Deepak Saxena <dsaxena@plexity.net> - * - * Copyright 2004 (c) MontaVista Software, Inc. - * - * Based on original code Copyright (c) 2002-2003 Intel Corporation - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __IXDP2X01_H__ -#define __IXDP2X01_H__ - -#define IXDP2X01_PHYS_CPLD_BASE 0xc6024000 -#define IXDP2X01_VIRT_CPLD_BASE 0xfe000000 -#define IXDP2X01_CPLD_REGION_SIZE 0x00100000 - -#define IXDP2X01_CPLD_VIRT_REG(reg) (volatile unsigned long*)(IXDP2X01_VIRT_CPLD_BASE | reg) -#define IXDP2X01_CPLD_PHYS_REG(reg) (IXDP2X01_PHYS_CPLD_BASE | reg) - -#define IXDP2X01_UART1_VIRT_BASE IXDP2X01_CPLD_VIRT_REG(0x40) -#define IXDP2X01_UART1_PHYS_BASE IXDP2X01_CPLD_PHYS_REG(0x40) - -#define IXDP2X01_UART2_VIRT_BASE IXDP2X01_CPLD_VIRT_REG(0x60) -#define IXDP2X01_UART2_PHYS_BASE IXDP2X01_CPLD_PHYS_REG(0x60) - -#define IXDP2X01_CS8900_VIRT_BASE IXDP2X01_CPLD_VIRT_REG(0x80) -#define IXDP2X01_CS8900_VIRT_END (IXDP2X01_CS8900_VIRT_BASE + 16) - -#define IXDP2X01_CPLD_RESET_REG IXDP2X01_CPLD_VIRT_REG(0x00) -#define IXDP2X01_INT_MASK_SET_REG IXDP2X01_CPLD_VIRT_REG(0x08) -#define IXDP2X01_INT_STAT_REG IXDP2X01_CPLD_VIRT_REG(0x0C) -#define IXDP2X01_INT_RAW_REG IXDP2X01_CPLD_VIRT_REG(0x10) -#define IXDP2X01_INT_MASK_CLR_REG IXDP2X01_INT_RAW_REG -#define IXDP2X01_INT_SIM_REG IXDP2X01_CPLD_VIRT_REG(0x14) - -#define IXDP2X01_CPLD_FLASH_REG IXDP2X01_CPLD_VIRT_REG(0x20) - -#define IXDP2X01_CPLD_FLASH_INTERN 0x8000 -#define IXDP2X01_CPLD_FLASH_BANK_MASK 0xF -#define IXDP2X01_FLASH_WINDOW_BITS 25 -#define IXDP2X01_FLASH_WINDOW_SIZE (1 << IXDP2X01_FLASH_WINDOW_BITS) -#define IXDP2X01_FLASH_WINDOW_MASK (IXDP2X01_FLASH_WINDOW_SIZE - 1) - -#define IXDP2X01_UART_CLK 1843200 - -#define IXDP2X01_GPIO_I2C_ENABLE 0x02 -#define IXDP2X01_GPIO_SCL 0x07 -#define IXDP2X01_GPIO_SDA 0x06 - -#endif /* __IXDP2x01_H__ */ diff --git a/arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h b/arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h deleted file mode 100644 index 822f63f2f4a..00000000000 --- a/arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h +++ /dev/null @@ -1,451 +0,0 @@ -/* - * arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h - * - * Chipset register definitions for IXP2400/2800 based systems. - * - * Original Author: Naeem Afzal <naeem.m.afzal@intel.com> - * - * Maintainer: Deepak Saxena <dsaxena@plexity.net> - * - * Copyright (C) 2002 Intel Corp. - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#ifndef _IXP2000_REGS_H_ -#define _IXP2000_REGS_H_ - -/* - * IXP2000 linux memory map: - * - * virt phys size - * fb000000 db000000 16M PCI CFG1 - * fc000000 da000000 16M PCI CFG0 - * fd000000 d8000000 16M PCI I/O - * fe[0-7]00000 8M per-platform mappings - * fe900000 80000000 1M SRAM #0 (first MB) - * fea00000 cb400000 1M SCRATCH ring get/put - * feb00000 c8000000 1M MSF - * fec00000 df000000 1M PCI CSRs - * fed00000 de000000 1M PCI CREG - * fee00000 d6000000 1M INTCTL - * fef00000 c0000000 1M CAP - */ - -/* - * Static I/O regions. - * - * Most of the registers are clumped in 4K regions spread throughout - * the 0xc0000000 -> 0xc0100000 address range, but we just map in - * the whole range using a single 1 MB section instead of small - * 4K pages. - * - * CAP stands for CSR Access Proxy. - * - * If you change the virtual address of this mapping, please propagate - * the change to arch/arm/kernel/debug.S, which hardcodes the virtual - * address of the UART located in this region. - */ - -#define IXP2000_CAP_PHYS_BASE 0xc0000000 -#define IXP2000_CAP_VIRT_BASE 0xfef00000 -#define IXP2000_CAP_SIZE 0x00100000 - -/* - * Addresses for specific on-chip peripherals. - */ -#define IXP2000_SLOWPORT_CSR_VIRT_BASE 0xfef80000 -#define IXP2000_GLOBAL_REG_VIRT_BASE 0xfef04000 -#define IXP2000_UART_PHYS_BASE 0xc0030000 -#define IXP2000_UART_VIRT_BASE 0xfef30000 -#define IXP2000_TIMER_VIRT_BASE 0xfef20000 -#define IXP2000_UENGINE_CSR_VIRT_BASE 0xfef18000 -#define IXP2000_GPIO_VIRT_BASE 0xfef10000 - -/* - * Devices outside of the 0xc0000000 -> 0xc0100000 range. The virtual - * addresses of the INTCTL and PCI_CSR mappings are hardcoded in - * entry-macro.S, so if you ever change these please propagate - * the change. - */ -#define IXP2000_INTCTL_PHYS_BASE 0xd6000000 -#define IXP2000_INTCTL_VIRT_BASE 0xfee00000 -#define IXP2000_INTCTL_SIZE 0x00100000 - -#define IXP2000_PCI_CREG_PHYS_BASE 0xde000000 -#define IXP2000_PCI_CREG_VIRT_BASE 0xfed00000 -#define IXP2000_PCI_CREG_SIZE 0x00100000 - -#define IXP2000_PCI_CSR_PHYS_BASE 0xdf000000 -#define IXP2000_PCI_CSR_VIRT_BASE 0xfec00000 -#define IXP2000_PCI_CSR_SIZE 0x00100000 - -#define IXP2000_MSF_PHYS_BASE 0xc8000000 -#define IXP2000_MSF_VIRT_BASE 0xfeb00000 -#define IXP2000_MSF_SIZE 0x00100000 - -#define IXP2000_SCRATCH_RING_PHYS_BASE 0xcb400000 -#define IXP2000_SCRATCH_RING_VIRT_BASE 0xfea00000 -#define IXP2000_SCRATCH_RING_SIZE 0x00100000 - -#define IXP2000_SRAM0_PHYS_BASE 0x80000000 -#define IXP2000_SRAM0_VIRT_BASE 0xfe900000 -#define IXP2000_SRAM0_SIZE 0x00100000 - -#define IXP2000_PCI_IO_PHYS_BASE 0xd8000000 -#define IXP2000_PCI_IO_VIRT_BASE 0xfd000000 -#define IXP2000_PCI_IO_SIZE 0x01000000 - -#define IXP2000_PCI_CFG0_PHYS_BASE 0xda000000 -#define IXP2000_PCI_CFG0_VIRT_BASE 0xfc000000 -#define IXP2000_PCI_CFG0_SIZE 0x01000000 - -#define IXP2000_PCI_CFG1_PHYS_BASE 0xdb000000 -#define IXP2000_PCI_CFG1_VIRT_BASE 0xfb000000 -#define IXP2000_PCI_CFG1_SIZE 0x01000000 - -/* - * Timers - */ -#define IXP2000_TIMER_REG(x) ((volatile unsigned long*)(IXP2000_TIMER_VIRT_BASE | (x))) -/* Timer control */ -#define IXP2000_T1_CTL IXP2000_TIMER_REG(0x00) -#define IXP2000_T2_CTL IXP2000_TIMER_REG(0x04) -#define IXP2000_T3_CTL IXP2000_TIMER_REG(0x08) -#define IXP2000_T4_CTL IXP2000_TIMER_REG(0x0c) -/* Store initial value */ -#define IXP2000_T1_CLD IXP2000_TIMER_REG(0x10) -#define IXP2000_T2_CLD IXP2000_TIMER_REG(0x14) -#define IXP2000_T3_CLD IXP2000_TIMER_REG(0x18) -#define IXP2000_T4_CLD IXP2000_TIMER_REG(0x1c) -/* Read current value */ -#define IXP2000_T1_CSR IXP2000_TIMER_REG(0x20) -#define IXP2000_T2_CSR IXP2000_TIMER_REG(0x24) -#define IXP2000_T3_CSR IXP2000_TIMER_REG(0x28) -#define IXP2000_T4_CSR IXP2000_TIMER_REG(0x2c) -/* Clear associated timer interrupt */ -#define IXP2000_T1_CLR IXP2000_TIMER_REG(0x30) -#define IXP2000_T2_CLR IXP2000_TIMER_REG(0x34) -#define IXP2000_T3_CLR IXP2000_TIMER_REG(0x38) -#define IXP2000_T4_CLR IXP2000_TIMER_REG(0x3c) -/* Timer watchdog enable for T4 */ -#define IXP2000_TWDE IXP2000_TIMER_REG(0x40) - -#define WDT_ENABLE 0x00000001 -#define TIMER_DIVIDER_256 0x00000008 -#define TIMER_ENABLE 0x00000080 -#define IRQ_MASK_TIMER1 (1 << 4) - -/* - * Interrupt controller registers - */ -#define IXP2000_INTCTL_REG(x) (volatile unsigned long*)(IXP2000_INTCTL_VIRT_BASE | (x)) -#define IXP2000_IRQ_STATUS IXP2000_INTCTL_REG(0x08) -#define IXP2000_IRQ_ENABLE IXP2000_INTCTL_REG(0x10) -#define IXP2000_IRQ_ENABLE_SET IXP2000_INTCTL_REG(0x10) -#define IXP2000_IRQ_ENABLE_CLR IXP2000_INTCTL_REG(0x18) -#define IXP2000_FIQ_ENABLE_CLR IXP2000_INTCTL_REG(0x14) -#define IXP2000_IRQ_ERR_STATUS IXP2000_INTCTL_REG(0x24) -#define IXP2000_IRQ_ERR_ENABLE_SET IXP2000_INTCTL_REG(0x2c) -#define IXP2000_FIQ_ERR_ENABLE_CLR IXP2000_INTCTL_REG(0x30) -#define IXP2000_IRQ_ERR_ENABLE_CLR IXP2000_INTCTL_REG(0x34) -#define IXP2000_IRQ_THD_RAW_STATUS_A_0 IXP2000_INTCTL_REG(0x60) -#define IXP2000_IRQ_THD_RAW_STATUS_A_1 IXP2000_INTCTL_REG(0x64) -#define IXP2000_IRQ_THD_RAW_STATUS_A_2 IXP2000_INTCTL_REG(0x68) -#define IXP2000_IRQ_THD_RAW_STATUS_A_3 IXP2000_INTCTL_REG(0x6c) -#define IXP2000_IRQ_THD_RAW_STATUS_B_0 IXP2000_INTCTL_REG(0x80) -#define IXP2000_IRQ_THD_RAW_STATUS_B_1 IXP2000_INTCTL_REG(0x84) -#define IXP2000_IRQ_THD_RAW_STATUS_B_2 IXP2000_INTCTL_REG(0x88) -#define IXP2000_IRQ_THD_RAW_STATUS_B_3 IXP2000_INTCTL_REG(0x8c) -#define IXP2000_IRQ_THD_STATUS_A_0 IXP2000_INTCTL_REG(0xe0) -#define IXP2000_IRQ_THD_STATUS_A_1 IXP2000_INTCTL_REG(0xe4) -#define IXP2000_IRQ_THD_STATUS_A_2 IXP2000_INTCTL_REG(0xe8) -#define IXP2000_IRQ_THD_STATUS_A_3 IXP2000_INTCTL_REG(0xec) -#define IXP2000_IRQ_THD_STATUS_B_0 IXP2000_INTCTL_REG(0x100) -#define IXP2000_IRQ_THD_STATUS_B_1 IXP2000_INTCTL_REG(0x104) -#define IXP2000_IRQ_THD_STATUS_B_2 IXP2000_INTCTL_REG(0x108) -#define IXP2000_IRQ_THD_STATUS_B_3 IXP2000_INTCTL_REG(0x10c) -#define IXP2000_IRQ_THD_ENABLE_SET_A_0 IXP2000_INTCTL_REG(0x160) -#define IXP2000_IRQ_THD_ENABLE_SET_A_1 IXP2000_INTCTL_REG(0x164) -#define IXP2000_IRQ_THD_ENABLE_SET_A_2 IXP2000_INTCTL_REG(0x168) -#define IXP2000_IRQ_THD_ENABLE_SET_A_3 IXP2000_INTCTL_REG(0x16c) -#define IXP2000_IRQ_THD_ENABLE_SET_B_0 IXP2000_INTCTL_REG(0x180) -#define IXP2000_IRQ_THD_ENABLE_SET_B_1 IXP2000_INTCTL_REG(0x184) -#define IXP2000_IRQ_THD_ENABLE_SET_B_2 IXP2000_INTCTL_REG(0x188) -#define IXP2000_IRQ_THD_ENABLE_SET_B_3 IXP2000_INTCTL_REG(0x18c) -#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_0 IXP2000_INTCTL_REG(0x1e0) -#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_1 IXP2000_INTCTL_REG(0x1e4) -#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_2 IXP2000_INTCTL_REG(0x1e8) -#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_3 IXP2000_INTCTL_REG(0x1ec) -#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_0 IXP2000_INTCTL_REG(0x200) -#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_1 IXP2000_INTCTL_REG(0x204) -#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_2 IXP2000_INTCTL_REG(0x208) -#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_3 IXP2000_INTCTL_REG(0x20c) - -/* - * Mask of valid IRQs in the 32-bit IRQ register. We use - * this to mark certain IRQs as being invalid. - */ -#define IXP2000_VALID_IRQ_MASK 0x0f0fffff - -/* - * PCI config register access from core - */ -#define IXP2000_PCI_CREG(x) (volatile unsigned long*)(IXP2000_PCI_CREG_VIRT_BASE | (x)) -#define IXP2000_PCI_CMDSTAT IXP2000_PCI_CREG(0x04) -#define IXP2000_PCI_CSR_BAR IXP2000_PCI_CREG(0x10) -#define IXP2000_PCI_SRAM_BAR IXP2000_PCI_CREG(0x14) -#define IXP2000_PCI_SDRAM_BAR IXP2000_PCI_CREG(0x18) - -/* - * PCI CSRs - */ -#define IXP2000_PCI_CSR(x) (volatile unsigned long*)(IXP2000_PCI_CSR_VIRT_BASE | (x)) - -/* - * PCI outbound interrupts - */ -#define IXP2000_PCI_OUT_INT_STATUS IXP2000_PCI_CSR(0x30) -#define IXP2000_PCI_OUT_INT_MASK IXP2000_PCI_CSR(0x34) -/* - * PCI communications - */ -#define IXP2000_PCI_MAILBOX0 IXP2000_PCI_CSR(0x50) -#define IXP2000_PCI_MAILBOX1 IXP2000_PCI_CSR(0x54) -#define IXP2000_PCI_MAILBOX2 IXP2000_PCI_CSR(0x58) -#define IXP2000_PCI_MAILBOX3 IXP2000_PCI_CSR(0x5C) -#define IXP2000_XSCALE_DOORBELL IXP2000_PCI_CSR(0x60) -#define IXP2000_XSCALE_DOORBELL_SETUP IXP2000_PCI_CSR(0x64) -#define IXP2000_PCI_DOORBELL IXP2000_PCI_CSR(0x70) -#define IXP2000_PCI_DOORBELL_SETUP IXP2000_PCI_CSR(0x74) - -/* - * DMA engines - */ -#define IXP2000_PCI_CH1_BYTE_CNT IXP2000_PCI_CSR(0x80) -#define IXP2000_PCI_CH1_ADDR IXP2000_PCI_CSR(0x84) -#define IXP2000_PCI_CH1_DRAM_ADDR IXP2000_PCI_CSR(0x88) -#define IXP2000_PCI_CH1_DESC_PTR IXP2000_PCI_CSR(0x8C) -#define IXP2000_PCI_CH1_CNTRL IXP2000_PCI_CSR(0x90) -#define IXP2000_PCI_CH1_ME_PARAM IXP2000_PCI_CSR(0x94) -#define IXP2000_PCI_CH2_BYTE_CNT IXP2000_PCI_CSR(0xA0) -#define IXP2000_PCI_CH2_ADDR IXP2000_PCI_CSR(0xA4) -#define IXP2000_PCI_CH2_DRAM_ADDR IXP2000_PCI_CSR(0xA8) -#define IXP2000_PCI_CH2_DESC_PTR IXP2000_PCI_CSR(0xAC) -#define IXP2000_PCI_CH2_CNTRL IXP2000_PCI_CSR(0xB0) -#define IXP2000_PCI_CH2_ME_PARAM IXP2000_PCI_CSR(0xB4) -#define IXP2000_PCI_CH3_BYTE_CNT IXP2000_PCI_CSR(0xC0) -#define IXP2000_PCI_CH3_ADDR IXP2000_PCI_CSR(0xC4) -#define IXP2000_PCI_CH3_DRAM_ADDR IXP2000_PCI_CSR(0xC8) -#define IXP2000_PCI_CH3_DESC_PTR IXP2000_PCI_CSR(0xCC) -#define IXP2000_PCI_CH3_CNTRL IXP2000_PCI_CSR(0xD0) -#define IXP2000_PCI_CH3_ME_PARAM IXP2000_PCI_CSR(0xD4) -#define IXP2000_DMA_INF_MODE IXP2000_PCI_CSR(0xE0) -/* - * Size masks for BARs - */ -#define IXP2000_PCI_SRAM_BASE_ADDR_MASK IXP2000_PCI_CSR(0xFC) -#define IXP2000_PCI_DRAM_BASE_ADDR_MASK IXP2000_PCI_CSR(0x100) -/* - * Control and uEngine related - */ -#define IXP2000_PCI_CONTROL IXP2000_PCI_CSR(0x13C) -#define IXP2000_PCI_ADDR_EXT IXP2000_PCI_CSR(0x140) -#define IXP2000_PCI_ME_PUSH_STATUS IXP2000_PCI_CSR(0x148) -#define IXP2000_PCI_ME_PUSH_EN IXP2000_PCI_CSR(0x14C) -#define IXP2000_PCI_ERR_STATUS IXP2000_PCI_CSR(0x150) -#define IXP2000_PCI_ERR_ENABLE IXP2000_PCI_CSR(0x154) -/* - * Inbound PCI interrupt control - */ -#define IXP2000_PCI_XSCALE_INT_STATUS IXP2000_PCI_CSR(0x158) -#define IXP2000_PCI_XSCALE_INT_ENABLE IXP2000_PCI_CSR(0x15C) - -#define IXP2000_PCICNTL_PNR (1<<17) /* PCI not Reset bit of PCI_CONTROL */ -#define IXP2000_PCICNTL_PCF (1<<28) /* PCI Central function bit */ -#define IXP2000_XSCALE_INT (1<<1) /* Interrupt from XScale to PCI */ - -/* These are from the IRQ register in the PCI ISR register */ -#define PCI_CONTROL_BE_DEO (1 << 22) /* Big Endian Data Enable Out */ -#define PCI_CONTROL_BE_DEI (1 << 21) /* Big Endian Data Enable In */ -#define PCI_CONTROL_BE_BEO (1 << 20) /* Big Endian Byte Enable Out */ -#define PCI_CONTROL_BE_BEI (1 << 19) /* Big Endian Byte Enable In */ -#define PCI_CONTROL_IEE (1 << 17) /* I/O cycle Endian swap Enable */ - -#define IXP2000_PCI_RST_REL (1 << 2) -#define CFG_RST_DIR (*IXP2000_PCI_CONTROL & IXP2000_PCICNTL_PCF) -#define CFG_PCI_BOOT_HOST (1 << 2) -#define CFG_BOOT_PROM (1 << 1) - -/* - * SlowPort CSRs - * - * The slowport is used to access things like flash, SONET framer control - * ports, slave microprocessors, CPLDs, and others of chip memory mapped - * peripherals. - */ -#define SLOWPORT_CSR(x) (volatile unsigned long*)(IXP2000_SLOWPORT_CSR_VIRT_BASE | (x)) - -#define IXP2000_SLOWPORT_CCR SLOWPORT_CSR(0x00) -#define IXP2000_SLOWPORT_WTC1 SLOWPORT_CSR(0x04) -#define IXP2000_SLOWPORT_WTC2 SLOWPORT_CSR(0x08) -#define IXP2000_SLOWPORT_RTC1 SLOWPORT_CSR(0x0c) -#define IXP2000_SLOWPORT_RTC2 SLOWPORT_CSR(0x10) -#define IXP2000_SLOWPORT_FSR SLOWPORT_CSR(0x14) -#define IXP2000_SLOWPORT_PCR SLOWPORT_CSR(0x18) -#define IXP2000_SLOWPORT_ADC SLOWPORT_CSR(0x1C) -#define IXP2000_SLOWPORT_FAC SLOWPORT_CSR(0x20) -#define IXP2000_SLOWPORT_FRM SLOWPORT_CSR(0x24) -#define IXP2000_SLOWPORT_FIN SLOWPORT_CSR(0x28) - -/* - * CCR values. - * The CCR configures the clock division for the slowport interface. - */ -#define SLOWPORT_CCR_DIV_1 0x00 -#define SLOWPORT_CCR_DIV_2 0x01 -#define SLOWPORT_CCR_DIV_4 0x02 -#define SLOWPORT_CCR_DIV_6 0x03 -#define SLOWPORT_CCR_DIV_8 0x04 -#define SLOWPORT_CCR_DIV_10 0x05 -#define SLOWPORT_CCR_DIV_12 0x06 -#define SLOWPORT_CCR_DIV_14 0x07 -#define SLOWPORT_CCR_DIV_16 0x08 -#define SLOWPORT_CCR_DIV_18 0x09 -#define SLOWPORT_CCR_DIV_20 0x0a -#define SLOWPORT_CCR_DIV_22 0x0b -#define SLOWPORT_CCR_DIV_24 0x0c -#define SLOWPORT_CCR_DIV_26 0x0d -#define SLOWPORT_CCR_DIV_28 0x0e -#define SLOWPORT_CCR_DIV_30 0x0f - -/* - * PCR values. PCR configure the mode of the interface. - */ -#define SLOWPORT_MODE_FLASH 0x00 -#define SLOWPORT_MODE_LUCENT 0x01 -#define SLOWPORT_MODE_PMC_SIERRA 0x02 -#define SLOWPORT_MODE_INTEL_UP 0x03 -#define SLOWPORT_MODE_MOTOROLA_UP 0x04 - -/* - * ADC values. Defines data and address bus widths. - */ -#define SLOWPORT_ADDR_WIDTH_8 0x00 -#define SLOWPORT_ADDR_WIDTH_16 0x01 -#define SLOWPORT_ADDR_WIDTH_24 0x02 -#define SLOWPORT_ADDR_WIDTH_32 0x03 -#define SLOWPORT_DATA_WIDTH_8 0x00 -#define SLOWPORT_DATA_WIDTH_16 0x10 -#define SLOWPORT_DATA_WIDTH_24 0x20 -#define SLOWPORT_DATA_WIDTH_32 0x30 - -/* - * Masks and shifts for various fields in the WTC and RTC registers. - */ -#define SLOWPORT_WRTC_MASK_HD 0x0003 -#define SLOWPORT_WRTC_MASK_PW 0x003c -#define SLOWPORT_WRTC_MASK_SU 0x03c0 - -#define SLOWPORT_WRTC_SHIFT_HD 0x00 -#define SLOWPORT_WRTC_SHIFT_SU 0x02 -#define SLOWPORT_WRTC_SHFIT_PW 0x06 - - -/* - * GPIO registers & GPIO interface. - */ -#define IXP2000_GPIO_REG(x) ((volatile unsigned long*)(IXP2000_GPIO_VIRT_BASE+(x))) -#define IXP2000_GPIO_PLR IXP2000_GPIO_REG(0x00) -#define IXP2000_GPIO_PDPR IXP2000_GPIO_REG(0x04) -#define IXP2000_GPIO_PDSR IXP2000_GPIO_REG(0x08) -#define IXP2000_GPIO_PDCR IXP2000_GPIO_REG(0x0c) -#define IXP2000_GPIO_POPR IXP2000_GPIO_REG(0x10) -#define IXP2000_GPIO_POSR IXP2000_GPIO_REG(0x14) -#define IXP2000_GPIO_POCR IXP2000_GPIO_REG(0x18) -#define IXP2000_GPIO_REDR IXP2000_GPIO_REG(0x1c) -#define IXP2000_GPIO_FEDR IXP2000_GPIO_REG(0x20) -#define IXP2000_GPIO_EDSR IXP2000_GPIO_REG(0x24) -#define IXP2000_GPIO_LSHR IXP2000_GPIO_REG(0x28) -#define IXP2000_GPIO_LSLR IXP2000_GPIO_REG(0x2c) -#define IXP2000_GPIO_LDSR IXP2000_GPIO_REG(0x30) -#define IXP2000_GPIO_INER IXP2000_GPIO_REG(0x34) -#define IXP2000_GPIO_INSR IXP2000_GPIO_REG(0x38) -#define IXP2000_GPIO_INCR IXP2000_GPIO_REG(0x3c) -#define IXP2000_GPIO_INST IXP2000_GPIO_REG(0x40) - -/* - * "Global" registers...whatever that's supposed to mean. - */ -#define GLOBAL_REG_BASE (IXP2000_GLOBAL_REG_VIRT_BASE + 0x0a00) -#define GLOBAL_REG(x) (volatile unsigned long*)(GLOBAL_REG_BASE | (x)) - -#define IXP2000_MAJ_PROD_TYPE_MASK 0x001F0000 -#define IXP2000_MAJ_PROD_TYPE_IXP2000 0x00000000 -#define IXP2000_MIN_PROD_TYPE_MASK 0x0000FF00 -#define IXP2000_MIN_PROD_TYPE_IXP2400 0x00000200 -#define IXP2000_MIN_PROD_TYPE_IXP2850 0x00000100 -#define IXP2000_MIN_PROD_TYPE_IXP2800 0x00000000 -#define IXP2000_MAJ_REV_MASK 0x000000F0 -#define IXP2000_MIN_REV_MASK 0x0000000F -#define IXP2000_PROD_ID_MASK 0xFFFFFFFF - -#define IXP2000_PRODUCT_ID GLOBAL_REG(0x00) -#define IXP2000_MISC_CONTROL GLOBAL_REG(0x04) -#define IXP2000_MSF_CLK_CNTRL GLOBAL_REG(0x08) -#define IXP2000_RESET0 GLOBAL_REG(0x0c) -#define IXP2000_RESET1 GLOBAL_REG(0x10) -#define IXP2000_CCR GLOBAL_REG(0x14) -#define IXP2000_STRAP_OPTIONS GLOBAL_REG(0x18) - -#define RSTALL (1 << 16) -#define WDT_RESET_ENABLE 0x01000000 - - -/* - * MSF registers. The IXP2400 and IXP2800 have somewhat different MSF - * units, but the registers that differ between the two don't overlap, - * so we can have one register list for both. - */ -#define IXP2000_MSF_REG(x) ((volatile unsigned long*)(IXP2000_MSF_VIRT_BASE + (x))) -#define IXP2000_MSF_RX_CONTROL IXP2000_MSF_REG(0x0000) -#define IXP2000_MSF_TX_CONTROL IXP2000_MSF_REG(0x0004) -#define IXP2000_MSF_INTERRUPT_STATUS IXP2000_MSF_REG(0x0008) -#define IXP2000_MSF_INTERRUPT_ENABLE IXP2000_MSF_REG(0x000c) -#define IXP2000_MSF_CSIX_TYPE_MAP IXP2000_MSF_REG(0x0010) -#define IXP2000_MSF_FC_EGRESS_STATUS IXP2000_MSF_REG(0x0014) -#define IXP2000_MSF_FC_INGRESS_STATUS IXP2000_MSF_REG(0x0018) -#define IXP2000_MSF_HWM_CONTROL IXP2000_MSF_REG(0x0024) -#define IXP2000_MSF_FC_STATUS_OVERRIDE IXP2000_MSF_REG(0x0028) -#define IXP2000_MSF_CLOCK_CONTROL IXP2000_MSF_REG(0x002c) -#define IXP2000_MSF_RX_PORT_MAP IXP2000_MSF_REG(0x0040) -#define IXP2000_MSF_RBUF_ELEMENT_DONE IXP2000_MSF_REG(0x0044) -#define IXP2000_MSF_RX_MPHY_POLL_LIMIT IXP2000_MSF_REG(0x0048) -#define IXP2000_MSF_RX_CALENDAR_LENGTH IXP2000_MSF_REG(0x0048) -#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_0 IXP2000_MSF_REG(0x0050) -#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_1 IXP2000_MSF_REG(0x0054) -#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_2 IXP2000_MSF_REG(0x0058) -#define IXP2000_MSF_TX_SEQUENCE_0 IXP2000_MSF_REG(0x0060) -#define IXP2000_MSF_TX_SEQUENCE_1 IXP2000_MSF_REG(0x0064) -#define IXP2000_MSF_TX_SEQUENCE_2 IXP2000_MSF_REG(0x0068) -#define IXP2000_MSF_TX_MPHY_POLL_LIMIT IXP2000_MSF_REG(0x0070) -#define IXP2000_MSF_TX_CALENDAR_LENGTH IXP2000_MSF_REG(0x0070) -#define IXP2000_MSF_RX_UP_CONTROL_0 IXP2000_MSF_REG(0x0080) -#define IXP2000_MSF_RX_UP_CONTROL_1 IXP2000_MSF_REG(0x0084) -#define IXP2000_MSF_RX_UP_CONTROL_2 IXP2000_MSF_REG(0x0088) -#define IXP2000_MSF_RX_UP_CONTROL_3 IXP2000_MSF_REG(0x008c) -#define IXP2000_MSF_TX_UP_CONTROL_0 IXP2000_MSF_REG(0x0090) -#define IXP2000_MSF_TX_UP_CONTROL_1 IXP2000_MSF_REG(0x0094) -#define IXP2000_MSF_TX_UP_CONTROL_2 IXP2000_MSF_REG(0x0098) -#define IXP2000_MSF_TX_UP_CONTROL_3 IXP2000_MSF_REG(0x009c) -#define IXP2000_MSF_TRAIN_DATA IXP2000_MSF_REG(0x00a0) -#define IXP2000_MSF_TRAIN_CALENDAR IXP2000_MSF_REG(0x00a4) -#define IXP2000_MSF_TRAIN_FLOW_CONTROL IXP2000_MSF_REG(0x00a8) -#define IXP2000_MSF_TX_CALENDAR_0 IXP2000_MSF_REG(0x1000) -#define IXP2000_MSF_RX_PORT_CALENDAR_STATUS IXP2000_MSF_REG(0x1400) - - -#endif /* _IXP2000_H_ */ diff --git a/arch/arm/mach-ixp2000/include/mach/memory.h b/arch/arm/mach-ixp2000/include/mach/memory.h deleted file mode 100644 index 5f0c4fd4076..00000000000 --- a/arch/arm/mach-ixp2000/include/mach/memory.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * arch/arm/mach-ixp2000/include/mach/memory.h - * - * Copyright (c) 2002 Intel Corp. - * Copyright (c) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x00000000) - -#include <mach/ixp2000-regs.h> - -#define IXP2000_PCI_SDRAM_OFFSET (*IXP2000_PCI_SDRAM_BAR & 0xfffffff0) - -#define __phys_to_bus(x) ((x) + (IXP2000_PCI_SDRAM_OFFSET - PHYS_OFFSET)) -#define __bus_to_phys(x) ((x) - (IXP2000_PCI_SDRAM_OFFSET - PHYS_OFFSET)) - -#define __virt_to_bus(v) __phys_to_bus(__virt_to_phys(v)) -#define __bus_to_virt(b) __phys_to_virt(__bus_to_phys(b)) -#define __pfn_to_bus(p) __phys_to_bus(__pfn_to_phys(p)) -#define __bus_to_pfn(b) __phys_to_pfn(__bus_to_phys(b)) - -#endif - diff --git a/arch/arm/mach-ixp2000/include/mach/platform.h b/arch/arm/mach-ixp2000/include/mach/platform.h deleted file mode 100644 index bb0f8dcf9ee..00000000000 --- a/arch/arm/mach-ixp2000/include/mach/platform.h +++ /dev/null @@ -1,153 +0,0 @@ -/* - * arch/arm/mach-ixp2000/include/mach/platform.h - * - * Various bits of code used by platform-level code. - * - * Author: Deepak Saxena <dsaxena@plexity.net> - * - * Copyright 2004 (c) MontaVista Software, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - - -#ifndef __ASSEMBLY__ - -static inline unsigned long ixp2000_reg_read(volatile void *reg) -{ - return *((volatile unsigned long *)reg); -} - -static inline void ixp2000_reg_write(volatile void *reg, unsigned long val) -{ - *((volatile unsigned long *)reg) = val; -} - -/* - * On the IXP2400, we can't use XCB=000 due to chip bugs. We use - * XCB=101 instead, but that makes all I/O accesses bufferable. This - * is not a problem in general, but we do have to be slightly more - * careful because I/O writes are no longer automatically flushed out - * of the write buffer. - * - * In cases where we want to make sure that a write has been flushed - * out of the write buffer before we proceed, for example when masking - * a device interrupt before re-enabling IRQs in CPSR, we can use this - * function, ixp2000_reg_wrb, which performs a write, a readback, and - * issues a dummy instruction dependent on the value of the readback - * (mov rX, rX) to make sure that the readback has completed before we - * continue. - */ -static inline void ixp2000_reg_wrb(volatile void *reg, unsigned long val) -{ - unsigned long dummy; - - *((volatile unsigned long *)reg) = val; - - dummy = *((volatile unsigned long *)reg); - __asm__ __volatile__("mov %0, %0" : "+r" (dummy)); -} - -/* - * Boards may multiplex different devices on the 2nd channel of - * the slowport interface that each need different configuration - * settings. For example, the IXDP2400 uses channel 2 on the interface - * to access the CPLD, the switch fabric card, and the media card. Each - * one needs a different mode so drivers must save/restore the mode - * before and after each operation. - * - * acquire_slowport(&your_config); - * ... - * do slowport operations - * ... - * release_slowport(); - * - * Note that while you have the slowport, you are holding a spinlock, - * so your code should be written as if you explicitly acquired a lock. - * - * The configuration only affects device 2 on the slowport, so the - * MTD map driver does not acquire/release the slowport. - */ -struct slowport_cfg { - unsigned long CCR; /* Clock divide */ - unsigned long WTC; /* Write Timing Control */ - unsigned long RTC; /* Read Timing Control */ - unsigned long PCR; /* Protocol Control Register */ - unsigned long ADC; /* Address/Data Width Control */ -}; - - -void ixp2000_acquire_slowport(struct slowport_cfg *, struct slowport_cfg *); -void ixp2000_release_slowport(struct slowport_cfg *); - -/* - * IXP2400 A0/A1 and IXP2800 A0/A1/A2 have broken slowport that requires - * tweaking of addresses in the MTD driver. - */ -static inline unsigned ixp2000_has_broken_slowport(void) -{ - unsigned long id = *IXP2000_PRODUCT_ID; - unsigned long id_prod = id & (IXP2000_MAJ_PROD_TYPE_MASK | - IXP2000_MIN_PROD_TYPE_MASK); - return (((id_prod == - /* fixed in IXP2400-B0 */ - (IXP2000_MAJ_PROD_TYPE_IXP2000 | - IXP2000_MIN_PROD_TYPE_IXP2400)) && - ((id & IXP2000_MAJ_REV_MASK) == 0)) || - ((id_prod == - /* fixed in IXP2800-B0 */ - (IXP2000_MAJ_PROD_TYPE_IXP2000 | - IXP2000_MIN_PROD_TYPE_IXP2800)) && - ((id & IXP2000_MAJ_REV_MASK) == 0)) || - ((id_prod == - /* fixed in IXP2850-B0 */ - (IXP2000_MAJ_PROD_TYPE_IXP2000 | - IXP2000_MIN_PROD_TYPE_IXP2850)) && - ((id & IXP2000_MAJ_REV_MASK) == 0))); -} - -static inline unsigned int ixp2000_has_flash(void) -{ - return ((*IXP2000_STRAP_OPTIONS) & (CFG_BOOT_PROM)); -} - -static inline unsigned int ixp2000_is_pcimaster(void) -{ - return ((*IXP2000_STRAP_OPTIONS) & (CFG_PCI_BOOT_HOST)); -} - -void ixp2000_map_io(void); -void ixp2000_uart_init(void); -void ixp2000_init_irq(void); -void ixp2000_init_time(unsigned long); -void ixp2000_restart(char, const char *); -unsigned long ixp2000_gettimeoffset(void); - -struct pci_sys_data; - -u32 *ixp2000_pci_config_addr(unsigned int bus, unsigned int devfn, int where); -void ixp2000_pci_preinit(void); -int ixp2000_pci_setup(int, struct pci_sys_data*); -struct pci_bus* ixp2000_pci_scan_bus(int, struct pci_sys_data*); -int ixp2000_pci_read_config(struct pci_bus*, unsigned int, int, int, u32 *); -int ixp2000_pci_write_config(struct pci_bus*, unsigned int, int, int, u32); - -/* - * Several of the IXP2000 systems have banked flash so we need to extend the - * flash_platform_data structure with some private pointers - */ -struct ixp2000_flash_data { - struct flash_platform_data *platform_data; - int nr_banks; - unsigned long (*bank_setup)(unsigned long); -}; - -struct ixp2000_i2c_pins { - unsigned long sda_pin; - unsigned long scl_pin; -}; - - -#endif /* !__ASSEMBLY__ */ diff --git a/arch/arm/mach-ixp2000/include/mach/timex.h b/arch/arm/mach-ixp2000/include/mach/timex.h deleted file mode 100644 index 835e659f93d..00000000000 --- a/arch/arm/mach-ixp2000/include/mach/timex.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * arch/arm/mach-ixp2000/include/mach/timex.h - * - * IXP2000 architecture timex specifications - */ - - -/* - * Default clock is 50MHz APB, but platform code can override this - */ -#define CLOCK_TICK_RATE 50000000 - - diff --git a/arch/arm/mach-ixp2000/include/mach/uncompress.h b/arch/arm/mach-ixp2000/include/mach/uncompress.h deleted file mode 100644 index ce363087df7..00000000000 --- a/arch/arm/mach-ixp2000/include/mach/uncompress.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * arch/arm/mach-ixp2000/include/mach/uncompress.h - * - * - * Original Author: Naeem Afzal <naeem.m.afzal@intel.com> - * Maintainer: Deepak Saxena <dsaxena@plexity.net> - * - * Copyright 2002 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include <linux/serial_reg.h> - -#define UART_BASE 0xc0030000 - -#define PHYS(x) ((volatile unsigned long *)(UART_BASE + x)) - -#define UARTDR PHYS(0x00) /* Transmit reg dlab=0 */ -#define UARTDLL PHYS(0x00) /* Divisor Latch reg dlab=1*/ -#define UARTDLM PHYS(0x04) /* Divisor Latch reg dlab=1*/ -#define UARTIER PHYS(0x04) /* Interrupt enable reg */ -#define UARTFCR PHYS(0x08) /* FIFO control reg dlab =0*/ -#define UARTLCR PHYS(0x0c) /* Control reg */ -#define UARTSR PHYS(0x14) /* Status reg */ - - -static inline void putc(int c) -{ - int j = 0x1000; - - while (--j && !(*UARTSR & UART_LSR_THRE)) - barrier(); - - *UARTDR = c; -} - -static inline void flush(void) -{ -} - -#define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/arch/arm/mach-ixp2000/ixdp2400.c b/arch/arm/mach-ixp2000/ixdp2400.c deleted file mode 100644 index 915ad49e3b8..00000000000 --- a/arch/arm/mach-ixp2000/ixdp2400.c +++ /dev/null @@ -1,180 +0,0 @@ -/* - * arch/arm/mach-ixp2000/ixdp2400.c - * - * IXDP2400 platform support - * - * Original Author: Naeem Afzal <naeem.m.afzal@intel.com> - * Maintainer: Deepak Saxena <dsaxena@plexity.net> - * - * Copyright (C) 2002 Intel Corp. - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/device.h> -#include <linux/bitops.h> -#include <linux/pci.h> -#include <linux/ioport.h> -#include <linux/delay.h> -#include <linux/io.h> - -#include <asm/irq.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <mach/hardware.h> -#include <asm/mach-types.h> - -#include <asm/mach/pci.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> -#include <asm/mach/time.h> -#include <asm/mach/flash.h> -#include <asm/mach/arch.h> - -/************************************************************************* - * IXDP2400 timer tick - *************************************************************************/ -static void __init ixdp2400_timer_init(void) -{ - int numerator, denominator; - int denom_array[] = {2, 4, 8, 16, 1, 2, 4, 8}; - - numerator = (*(IXDP2400_CPLD_SYS_CLK_M) & 0xFF) *2; - denominator = denom_array[(*(IXDP2400_CPLD_SYS_CLK_N) & 0x7)]; - - ixp2000_init_time(((3125000 * numerator) / (denominator)) / 2); -} - -static struct sys_timer ixdp2400_timer = { - .init = ixdp2400_timer_init, - .offset = ixp2000_gettimeoffset, -}; - -/************************************************************************* - * IXDP2400 PCI - *************************************************************************/ -void __init ixdp2400_pci_preinit(void) -{ - ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00100000); - ixp2000_pci_preinit(); - pcibios_setup("firmware"); -} - -int ixdp2400_pci_setup(int nr, struct pci_sys_data *sys) -{ - sys->mem_offset = 0xe0000000; - - ixp2000_pci_setup(nr, sys); - - return 1; -} - -static int __init ixdp2400_pci_map_irq(const struct pci_dev *dev, u8 slot, - u8 pin) -{ - if (ixdp2x00_master_npu()) { - - /* - * Root bus devices. Slave NPU is only one with interrupt. - * Everything else, we just return -1 b/c nothing else - * on the root bus has interrupts. - */ - if(!dev->bus->self) { - if(dev->devfn == IXDP2X00_SLAVE_NPU_DEVFN ) - return IRQ_IXDP2400_INGRESS_NPU; - - return -1; - } - - /* - * Bridge behind the PMC slot. - * NOTE: Only INTA from the PMC slot is routed. VERY BAD. - */ - if(dev->bus->self->devfn == IXDP2X00_PMC_DEVFN && - dev->bus->parent->self->devfn == IXDP2X00_P2P_DEVFN && - !dev->bus->parent->self->bus->parent) - return IRQ_IXDP2400_PMC; - - /* - * Device behind the first bridge - */ - if(dev->bus->self->devfn == IXDP2X00_P2P_DEVFN) { - switch(dev->devfn) { - case IXDP2400_MASTER_ENET_DEVFN: - return IRQ_IXDP2400_ENET; - - case IXDP2400_MEDIA_DEVFN: - return IRQ_IXDP2400_MEDIA_PCI; - - case IXDP2400_SWITCH_FABRIC_DEVFN: - return IRQ_IXDP2400_SF_PCI; - - case IXDP2X00_PMC_DEVFN: - return IRQ_IXDP2400_PMC; - } - } - - return -1; - } else return IRQ_IXP2000_PCIB; /* Slave NIC interrupt */ -} - - -static void ixdp2400_pci_postinit(void) -{ - struct pci_dev *dev; - - if (ixdp2x00_master_npu()) { - dev = pci_get_bus_and_slot(1, IXDP2400_SLAVE_ENET_DEVFN); - pci_stop_and_remove_bus_device(dev); - pci_dev_put(dev); - } else { - dev = pci_get_bus_and_slot(1, IXDP2400_MASTER_ENET_DEVFN); - pci_stop_and_remove_bus_device(dev); - pci_dev_put(dev); - - ixdp2x00_slave_pci_postinit(); - } -} - -static struct hw_pci ixdp2400_pci __initdata = { - .nr_controllers = 1, - .setup = ixdp2400_pci_setup, - .preinit = ixdp2400_pci_preinit, - .postinit = ixdp2400_pci_postinit, - .scan = ixp2000_pci_scan_bus, - .map_irq = ixdp2400_pci_map_irq, -}; - -int __init ixdp2400_pci_init(void) -{ - if (machine_is_ixdp2400()) - pci_common_init(&ixdp2400_pci); - - return 0; -} - -subsys_initcall(ixdp2400_pci_init); - -void __init ixdp2400_init_irq(void) -{ - ixdp2x00_init_irq(IXDP2400_CPLD_INT_STAT, IXDP2400_CPLD_INT_MASK, IXDP2400_NR_IRQS); -} - -MACHINE_START(IXDP2400, "Intel IXDP2400 Development Platform") - /* Maintainer: MontaVista Software, Inc. */ - .atag_offset = 0x100, - .map_io = ixdp2x00_map_io, - .init_irq = ixdp2400_init_irq, - .timer = &ixdp2400_timer, - .init_machine = ixdp2x00_init_machine, - .restart = ixp2000_restart, -MACHINE_END - diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c deleted file mode 100644 index a9f1819ea04..00000000000 --- a/arch/arm/mach-ixp2000/ixdp2800.c +++ /dev/null @@ -1,295 +0,0 @@ -/* - * arch/arm/mach-ixp2000/ixdp2800.c - * - * IXDP2800 platform support - * - * Original Author: Jeffrey Daly <jeffrey.daly@intel.com> - * Maintainer: Deepak Saxena <dsaxena@plexity.net> - * - * Copyright (C) 2002 Intel Corp. - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/device.h> -#include <linux/bitops.h> -#include <linux/pci.h> -#include <linux/ioport.h> -#include <linux/delay.h> -#include <linux/io.h> - -#include <asm/irq.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <mach/hardware.h> -#include <asm/mach-types.h> - -#include <asm/mach/pci.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> -#include <asm/mach/time.h> -#include <asm/mach/flash.h> -#include <asm/mach/arch.h> - -/************************************************************************* - * IXDP2800 timer tick - *************************************************************************/ - -static void __init ixdp2800_timer_init(void) -{ - ixp2000_init_time(50000000); -} - -static struct sys_timer ixdp2800_timer = { - .init = ixdp2800_timer_init, - .offset = ixp2000_gettimeoffset, -}; - -/************************************************************************* - * IXDP2800 PCI - *************************************************************************/ -static void __init ixdp2800_slave_disable_pci_master(void) -{ - *IXP2000_PCI_CMDSTAT &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); -} - -static void __init ixdp2800_master_wait_for_slave(void) -{ - volatile u32 *addr; - - printk(KERN_INFO "IXDP2800: waiting for slave NPU to configure " - "its BAR sizes\n"); - - addr = ixp2000_pci_config_addr(0, IXDP2X00_SLAVE_NPU_DEVFN, - PCI_BASE_ADDRESS_1); - do { - *addr = 0xffffffff; - cpu_relax(); - } while (*addr != 0xfe000008); - - addr = ixp2000_pci_config_addr(0, IXDP2X00_SLAVE_NPU_DEVFN, - PCI_BASE_ADDRESS_2); - do { - *addr = 0xffffffff; - cpu_relax(); - } while (*addr != 0xc0000008); - - /* - * Configure the slave's SDRAM BAR by hand. - */ - *addr = 0x40000008; -} - -static void __init ixdp2800_slave_wait_for_master_enable(void) -{ - printk(KERN_INFO "IXDP2800: waiting for master NPU to enable us\n"); - - while ((*IXP2000_PCI_CMDSTAT & PCI_COMMAND_MASTER) == 0) - cpu_relax(); -} - -void __init ixdp2800_pci_preinit(void) -{ - printk("ixdp2x00_pci_preinit called\n"); - - *IXP2000_PCI_ADDR_EXT = 0x0001e000; - - if (!ixdp2x00_master_npu()) - ixdp2800_slave_disable_pci_master(); - - *IXP2000_PCI_SRAM_BASE_ADDR_MASK = (0x2000000 - 1) & ~0x3ffff; - *IXP2000_PCI_DRAM_BASE_ADDR_MASK = (0x40000000 - 1) & ~0xfffff; - - ixp2000_pci_preinit(); - - if (ixdp2x00_master_npu()) { - /* - * Wait until the slave set its SRAM/SDRAM BAR sizes - * correctly before we proceed to scan and enumerate - * the bus. - */ - ixdp2800_master_wait_for_slave(); - - /* - * We configure the SDRAM BARs by hand because they - * are 1G and fall outside of the regular allocated - * PCI address space. - */ - *IXP2000_PCI_SDRAM_BAR = 0x00000008; - } else { - /* - * Wait for the master to complete scanning the bus - * and assigning resources before we proceed to scan - * the bus ourselves. Set pci=firmware to honor the - * master's resource assignment. - */ - ixdp2800_slave_wait_for_master_enable(); - pcibios_setup("firmware"); - } -} - -/* - * We assign the SDRAM BARs for the two IXP2800 CPUs by hand, outside - * of the regular PCI window, because there's only 512M of outbound PCI - * memory window on each IXP, while we need 1G for each of the BARs. - */ -static void __devinit ixp2800_pci_fixup(struct pci_dev *dev) -{ - if (machine_is_ixdp2800()) { - dev->resource[2].start = 0; - dev->resource[2].end = 0; - dev->resource[2].flags = 0; - } -} -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IXP2800, ixp2800_pci_fixup); - -static int __init ixdp2800_pci_setup(int nr, struct pci_sys_data *sys) -{ - sys->mem_offset = 0x00000000; - - ixp2000_pci_setup(nr, sys); - - return 1; -} - -static int __init ixdp2800_pci_map_irq(const struct pci_dev *dev, u8 slot, - u8 pin) -{ - if (ixdp2x00_master_npu()) { - - /* - * Root bus devices. Slave NPU is only one with interrupt. - * Everything else, we just return -1 which is invalid. - */ - if(!dev->bus->self) { - if(dev->devfn == IXDP2X00_SLAVE_NPU_DEVFN ) - return IRQ_IXDP2800_INGRESS_NPU; - - return -1; - } - - /* - * Bridge behind the PMC slot. - */ - if(dev->bus->self->devfn == IXDP2X00_PMC_DEVFN && - dev->bus->parent->self->devfn == IXDP2X00_P2P_DEVFN && - !dev->bus->parent->self->bus->parent) - return IRQ_IXDP2800_PMC; - - /* - * Device behind the first bridge - */ - if(dev->bus->self->devfn == IXDP2X00_P2P_DEVFN) { - switch(dev->devfn) { - case IXDP2X00_PMC_DEVFN: - return IRQ_IXDP2800_PMC; - - case IXDP2800_MASTER_ENET_DEVFN: - return IRQ_IXDP2800_EGRESS_ENET; - - case IXDP2800_SWITCH_FABRIC_DEVFN: - return IRQ_IXDP2800_FABRIC; - } - } - - return -1; - } else return IRQ_IXP2000_PCIB; /* Slave NIC interrupt */ -} - -static void __init ixdp2800_master_enable_slave(void) -{ - volatile u32 *addr; - - printk(KERN_INFO "IXDP2800: enabling slave NPU\n"); - - addr = (volatile u32 *)ixp2000_pci_config_addr(0, - IXDP2X00_SLAVE_NPU_DEVFN, - PCI_COMMAND); - - *addr |= PCI_COMMAND_MASTER; -} - -static void __init ixdp2800_master_wait_for_slave_bus_scan(void) -{ - volatile u32 *addr; - - printk(KERN_INFO "IXDP2800: waiting for slave to finish bus scan\n"); - - addr = (volatile u32 *)ixp2000_pci_config_addr(0, - IXDP2X00_SLAVE_NPU_DEVFN, - PCI_COMMAND); - while ((*addr & PCI_COMMAND_MEMORY) == 0) - cpu_relax(); -} - -static void __init ixdp2800_slave_signal_bus_scan_completion(void) -{ - printk(KERN_INFO "IXDP2800: bus scan done, signaling master\n"); - *IXP2000_PCI_CMDSTAT |= PCI_COMMAND_MEMORY; -} - -static void __init ixdp2800_pci_postinit(void) -{ - if (!ixdp2x00_master_npu()) { - ixdp2x00_slave_pci_postinit(); - ixdp2800_slave_signal_bus_scan_completion(); - } -} - -struct __initdata hw_pci ixdp2800_pci __initdata = { - .nr_controllers = 1, - .setup = ixdp2800_pci_setup, - .preinit = ixdp2800_pci_preinit, - .postinit = ixdp2800_pci_postinit, - .scan = ixp2000_pci_scan_bus, - .map_irq = ixdp2800_pci_map_irq, -}; - -int __init ixdp2800_pci_init(void) -{ - if (machine_is_ixdp2800()) { - struct pci_dev *dev; - - pci_common_init(&ixdp2800_pci); - if (ixdp2x00_master_npu()) { - dev = pci_get_bus_and_slot(1, IXDP2800_SLAVE_ENET_DEVFN); - pci_stop_and_remove_bus_device(dev); - pci_dev_put(dev); - - ixdp2800_master_enable_slave(); - ixdp2800_master_wait_for_slave_bus_scan(); - } else { - dev = pci_get_bus_and_slot(1, IXDP2800_MASTER_ENET_DEVFN); - pci_stop_and_remove_bus_device(dev); - pci_dev_put(dev); - } - } - - return 0; -} - -subsys_initcall(ixdp2800_pci_init); - -void __init ixdp2800_init_irq(void) -{ - ixdp2x00_init_irq(IXDP2800_CPLD_INT_STAT, IXDP2800_CPLD_INT_MASK, IXDP2800_NR_IRQS); -} - -MACHINE_START(IXDP2800, "Intel IXDP2800 Development Platform") - /* Maintainer: MontaVista Software, Inc. */ - .atag_offset = 0x100, - .map_io = ixdp2x00_map_io, - .init_irq = ixdp2800_init_irq, - .timer = &ixdp2800_timer, - .init_machine = ixdp2x00_init_machine, - .restart = ixp2000_restart, -MACHINE_END - diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c deleted file mode 100644 index 421e38dc0fa..00000000000 --- a/arch/arm/mach-ixp2000/ixdp2x00.c +++ /dev/null @@ -1,306 +0,0 @@ -/* - * arch/arm/mach-ixp2000/ixdp2x00.c - * - * Code common to IXDP2400 and IXDP2800 platforms. - * - * Original Author: Naeem Afzal <naeem.m.afzal@intel.com> - * Maintainer: Deepak Saxena <dsaxena@plexity.net> - * - * Copyright (C) 2002 Intel Corp. - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/bitops.h> -#include <linux/pci.h> -#include <linux/ioport.h> -#include <linux/delay.h> -#include <linux/io.h> - -#include <asm/irq.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <mach/hardware.h> -#include <asm/mach-types.h> - -#include <asm/mach/pci.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> -#include <asm/mach/time.h> -#include <asm/mach/flash.h> -#include <asm/mach/arch.h> - -#include <mach/gpio-ixp2000.h> - -/************************************************************************* - * IXDP2x00 IRQ Initialization - *************************************************************************/ -static volatile unsigned long *board_irq_mask; -static volatile unsigned long *board_irq_stat; -static unsigned long board_irq_count; - -#ifdef CONFIG_ARCH_IXDP2400 -/* - * Slowport configuration for accessing CPLD registers on IXDP2x00 - */ -static struct slowport_cfg slowport_cpld_cfg = { - .CCR = SLOWPORT_CCR_DIV_2, - .WTC = 0x00000070, - .RTC = 0x00000070, - .PCR = SLOWPORT_MODE_FLASH, - .ADC = SLOWPORT_ADDR_WIDTH_24 | SLOWPORT_DATA_WIDTH_8 -}; -#endif - -static void ixdp2x00_irq_mask(struct irq_data *d) -{ - unsigned long dummy; - static struct slowport_cfg old_cfg; - - /* - * This is ugly in common code but really don't know - * of a better way to handle it. :( - */ -#ifdef CONFIG_ARCH_IXDP2400 - if (machine_is_ixdp2400()) - ixp2000_acquire_slowport(&slowport_cpld_cfg, &old_cfg); -#endif - - dummy = *board_irq_mask; - dummy |= IXP2000_BOARD_IRQ_MASK(d->irq); - ixp2000_reg_wrb(board_irq_mask, dummy); - -#ifdef CONFIG_ARCH_IXDP2400 - if (machine_is_ixdp2400()) - ixp2000_release_slowport(&old_cfg); -#endif -} - -static void ixdp2x00_irq_unmask(struct irq_data *d) -{ - unsigned long dummy; - static struct slowport_cfg old_cfg; - -#ifdef CONFIG_ARCH_IXDP2400 - if (machine_is_ixdp2400()) - ixp2000_acquire_slowport(&slowport_cpld_cfg, &old_cfg); -#endif - - dummy = *board_irq_mask; - dummy &= ~IXP2000_BOARD_IRQ_MASK(d->irq); - ixp2000_reg_wrb(board_irq_mask, dummy); - - if (machine_is_ixdp2400()) - ixp2000_release_slowport(&old_cfg); -} - -static void ixdp2x00_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - volatile u32 ex_interrupt = 0; - static struct slowport_cfg old_cfg; - int i; - - desc->irq_data.chip->irq_mask(&desc->irq_data); - -#ifdef CONFIG_ARCH_IXDP2400 - if (machine_is_ixdp2400()) - ixp2000_acquire_slowport(&slowport_cpld_cfg, &old_cfg); -#endif - ex_interrupt = *board_irq_stat & 0xff; - if (machine_is_ixdp2400()) - ixp2000_release_slowport(&old_cfg); - - if(!ex_interrupt) { - printk(KERN_ERR "Spurious IXDP2x00 CPLD interrupt!\n"); - return; - } - - for(i = 0; i < board_irq_count; i++) { - if(ex_interrupt & (1 << i)) { - int cpld_irq = IXP2000_BOARD_IRQ(0) + i; - generic_handle_irq(cpld_irq); - } - } - - desc->irq_data.chip->irq_unmask(&desc->irq_data); -} - -static struct irq_chip ixdp2x00_cpld_irq_chip = { - .irq_ack = ixdp2x00_irq_mask, - .irq_mask = ixdp2x00_irq_mask, - .irq_unmask = ixdp2x00_irq_unmask -}; - -void __init ixdp2x00_init_irq(volatile unsigned long *stat_reg, volatile unsigned long *mask_reg, unsigned long nr_of_irqs) -{ - unsigned int irq; - - ixp2000_init_irq(); - - if (!ixdp2x00_master_npu()) - return; - - board_irq_stat = stat_reg; - board_irq_mask = mask_reg; - board_irq_count = nr_of_irqs; - - *board_irq_mask = 0xffffffff; - - for(irq = IXP2000_BOARD_IRQ(0); irq < IXP2000_BOARD_IRQ(board_irq_count); irq++) { - irq_set_chip_and_handler(irq, &ixdp2x00_cpld_irq_chip, - handle_level_irq); - set_irq_flags(irq, IRQF_VALID); - } - - /* Hook into PCI interrupt */ - irq_set_chained_handler(IRQ_IXP2000_PCIB, ixdp2x00_irq_handler); -} - -/************************************************************************* - * IXDP2x00 memory map - *************************************************************************/ -static struct map_desc ixdp2x00_io_desc __initdata = { - .virtual = IXDP2X00_VIRT_CPLD_BASE, - .pfn = __phys_to_pfn(IXDP2X00_PHYS_CPLD_BASE), - .length = IXDP2X00_CPLD_SIZE, - .type = MT_DEVICE -}; - -void __init ixdp2x00_map_io(void) -{ - ixp2000_map_io(); - - iotable_init(&ixdp2x00_io_desc, 1); -} - -/************************************************************************* - * IXDP2x00-common PCI init - * - * The IXDP2[48]00 has a horrid PCI bus layout. Basically the board - * contains two NPUs (ingress and egress) connected over PCI, both running - * instances of the kernel. So far so good. Peers on the PCI bus running - * Linux is a common design in telecom systems. The problem is that instead - * of all the devices being controlled by a single host, different - * devices are controlled by different NPUs on the same bus, leading to - * multiple hosts on the bus. The exact bus layout looks like: - * - * Bus 0 - * Master NPU <-------------------+-------------------> Slave NPU - * | - * | - * P2P - * | - * - * Bus 1 | - * <--+------+---------+---------+------+--> - * | | | | | - * | | | | | - * ... Dev PMC Media Eth0 Eth1 ... - * - * The master controls all but Eth1, which is controlled by the - * slave. What this means is that the both the master and the slave - * have to scan the bus, but only one of them can enumerate the bus. - * In addition, after the bus is scanned, each kernel must remove - * the device(s) it does not control from the PCI dev list otherwise - * a driver on each NPU will try to manage it and we will have horrible - * conflicts. Oh..and the slave NPU needs to see the master NPU - * for Intel's drivers to work properly. Closed source drivers... - * - * The way we deal with this is fairly simple but ugly: - * - * 1) Let master scan and enumerate the bus completely. - * 2) Master deletes Eth1 from device list. - * 3) Slave scans bus and then deletes all but Eth1 (Eth0 on slave) - * from device list. - * 4) Find HW designers and LART them. - * - * The boards also do not do normal PCI IRQ routing, or any sort of - * sensical swizzling, so we just need to check where on the bus a - * device sits and figure out to which CPLD pin the interrupt is routed. - * See ixdp2[48]00.c files. - * - *************************************************************************/ -void ixdp2x00_slave_pci_postinit(void) -{ - struct pci_dev *dev; - - /* - * Remove PMC device is there is one - */ - if((dev = pci_get_bus_and_slot(1, IXDP2X00_PMC_DEVFN))) { - pci_stop_and_remove_bus_device(dev); - pci_dev_put(dev); - } - - dev = pci_get_bus_and_slot(0, IXDP2X00_21555_DEVFN); - pci_stop_and_remove_bus_device(dev); - pci_dev_put(dev); -} - -/************************************************************************** - * IXDP2x00 Machine Setup - *************************************************************************/ -static struct flash_platform_data ixdp2x00_platform_data = { - .map_name = "cfi_probe", - .width = 1, -}; - -static struct ixp2000_flash_data ixdp2x00_flash_data = { - .platform_data = &ixdp2x00_platform_data, - .nr_banks = 1 -}; - -static struct resource ixdp2x00_flash_resource = { - .start = 0xc4000000, - .end = 0xc4000000 + 0x00ffffff, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device ixdp2x00_flash = { - .name = "IXP2000-Flash", - .id = 0, - .dev = { - .platform_data = &ixdp2x00_flash_data, - }, - .num_resources = 1, - .resource = &ixdp2x00_flash_resource, -}; - -static struct ixp2000_i2c_pins ixdp2x00_i2c_gpio_pins = { - .sda_pin = IXDP2X00_GPIO_SDA, - .scl_pin = IXDP2X00_GPIO_SCL, -}; - -static struct platform_device ixdp2x00_i2c_controller = { - .name = "IXP2000-I2C", - .id = 0, - .dev = { - .platform_data = &ixdp2x00_i2c_gpio_pins, - }, - .num_resources = 0 -}; - -static struct platform_device *ixdp2x00_devices[] __initdata = { - &ixdp2x00_flash, - &ixdp2x00_i2c_controller -}; - -void __init ixdp2x00_init_machine(void) -{ - gpio_line_set(IXDP2X00_GPIO_I2C_ENABLE, 1); - gpio_line_config(IXDP2X00_GPIO_I2C_ENABLE, GPIO_OUT); - - platform_add_devices(ixdp2x00_devices, ARRAY_SIZE(ixdp2x00_devices)); - ixp2000_uart_init(); -} - diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c deleted file mode 100644 index 5196c39cdba..00000000000 --- a/arch/arm/mach-ixp2000/ixdp2x01.c +++ /dev/null @@ -1,483 +0,0 @@ -/* - * arch/arm/mach-ixp2000/ixdp2x01.c - * - * Code common to Intel IXDP2401 and IXDP2801 platforms - * - * Original Author: Andrzej Mialkowski <andrzej.mialkowski@intel.com> - * Maintainer: Deepak Saxena <dsaxena@plexity.net> - * - * Copyright (C) 2002-2003 Intel Corp. - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/bitops.h> -#include <linux/pci.h> -#include <linux/ioport.h> -#include <linux/delay.h> -#include <linux/serial.h> -#include <linux/tty.h> -#include <linux/serial_core.h> -#include <linux/platform_device.h> -#include <linux/serial_8250.h> -#include <linux/io.h> - -#include <asm/irq.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <mach/hardware.h> -#include <asm/mach-types.h> - -#include <asm/mach/pci.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> -#include <asm/mach/time.h> -#include <asm/mach/arch.h> -#include <asm/mach/flash.h> - -/************************************************************************* - * IXDP2x01 IRQ Handling - *************************************************************************/ -static void ixdp2x01_irq_mask(struct irq_data *d) -{ - ixp2000_reg_wrb(IXDP2X01_INT_MASK_SET_REG, - IXP2000_BOARD_IRQ_MASK(d->irq)); -} - -static void ixdp2x01_irq_unmask(struct irq_data *d) -{ - ixp2000_reg_write(IXDP2X01_INT_MASK_CLR_REG, - IXP2000_BOARD_IRQ_MASK(d->irq)); -} - -static u32 valid_irq_mask; - -static void ixdp2x01_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - u32 ex_interrupt; - int i; - - desc->irq_data.chip->irq_mask(&desc->irq_data); - - ex_interrupt = *IXDP2X01_INT_STAT_REG & valid_irq_mask; - - if (!ex_interrupt) { - printk(KERN_ERR "Spurious IXDP2X01 CPLD interrupt!\n"); - return; - } - - for (i = 0; i < IXP2000_BOARD_IRQS; i++) { - if (ex_interrupt & (1 << i)) { - int cpld_irq = IXP2000_BOARD_IRQ(0) + i; - generic_handle_irq(cpld_irq); - } - } - - desc->irq_data.chip->irq_unmask(&desc->irq_data); -} - -static struct irq_chip ixdp2x01_irq_chip = { - .irq_mask = ixdp2x01_irq_mask, - .irq_ack = ixdp2x01_irq_mask, - .irq_unmask = ixdp2x01_irq_unmask -}; - -/* - * We only do anything if we are the master NPU on the board. - * The slave NPU only has the ethernet chip going directly to - * the PCIB interrupt input. - */ -void __init ixdp2x01_init_irq(void) -{ - int irq = 0; - - /* initialize chip specific interrupts */ - ixp2000_init_irq(); - - if (machine_is_ixdp2401()) - valid_irq_mask = IXDP2401_VALID_IRQ_MASK; - else - valid_irq_mask = IXDP2801_VALID_IRQ_MASK; - - /* Mask all interrupts from CPLD, disable simulation */ - ixp2000_reg_write(IXDP2X01_INT_MASK_SET_REG, 0xffffffff); - ixp2000_reg_wrb(IXDP2X01_INT_SIM_REG, 0); - - for (irq = NR_IXP2000_IRQS; irq < NR_IXDP2X01_IRQS; irq++) { - if (irq & valid_irq_mask) { - irq_set_chip_and_handler(irq, &ixdp2x01_irq_chip, - handle_level_irq); - set_irq_flags(irq, IRQF_VALID); - } else { - set_irq_flags(irq, 0); - } - } - - /* Hook into PCI interrupts */ - irq_set_chained_handler(IRQ_IXP2000_PCIB, ixdp2x01_irq_handler); -} - - -/************************************************************************* - * IXDP2x01 memory map - *************************************************************************/ -static struct map_desc ixdp2x01_io_desc __initdata = { - .virtual = IXDP2X01_VIRT_CPLD_BASE, - .pfn = __phys_to_pfn(IXDP2X01_PHYS_CPLD_BASE), - .length = IXDP2X01_CPLD_REGION_SIZE, - .type = MT_DEVICE -}; - -static void __init ixdp2x01_map_io(void) -{ - ixp2000_map_io(); - iotable_init(&ixdp2x01_io_desc, 1); -} - - -/************************************************************************* - * IXDP2x01 serial ports - *************************************************************************/ -static struct plat_serial8250_port ixdp2x01_serial_port1[] = { - { - .mapbase = (unsigned long)IXDP2X01_UART1_PHYS_BASE, - .membase = (char *)IXDP2X01_UART1_VIRT_BASE, - .irq = IRQ_IXDP2X01_UART1, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, - .iotype = UPIO_MEM32, - .regshift = 2, - .uartclk = IXDP2X01_UART_CLK, - }, - { } -}; - -static struct resource ixdp2x01_uart_resource1 = { - .start = IXDP2X01_UART1_PHYS_BASE, - .end = IXDP2X01_UART1_PHYS_BASE + 0xffff, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device ixdp2x01_serial_device1 = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM1, - .dev = { - .platform_data = ixdp2x01_serial_port1, - }, - .num_resources = 1, - .resource = &ixdp2x01_uart_resource1, -}; - -static struct plat_serial8250_port ixdp2x01_serial_port2[] = { - { - .mapbase = (unsigned long)IXDP2X01_UART2_PHYS_BASE, - .membase = (char *)IXDP2X01_UART2_VIRT_BASE, - .irq = IRQ_IXDP2X01_UART2, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, - .iotype = UPIO_MEM32, - .regshift = 2, - .uartclk = IXDP2X01_UART_CLK, - }, - { } -}; - -static struct resource ixdp2x01_uart_resource2 = { - .start = IXDP2X01_UART2_PHYS_BASE, - .end = IXDP2X01_UART2_PHYS_BASE + 0xffff, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device ixdp2x01_serial_device2 = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM2, - .dev = { - .platform_data = ixdp2x01_serial_port2, - }, - .num_resources = 1, - .resource = &ixdp2x01_uart_resource2, -}; - -static void ixdp2x01_uart_init(void) -{ - platform_device_register(&ixdp2x01_serial_device1); - platform_device_register(&ixdp2x01_serial_device2); -} - - -/************************************************************************* - * IXDP2x01 timer tick configuration - *************************************************************************/ -static unsigned int ixdp2x01_clock; - -static int __init ixdp2x01_clock_setup(char *str) -{ - ixdp2x01_clock = simple_strtoul(str, NULL, 10); - - return 1; -} - -__setup("ixdp2x01_clock=", ixdp2x01_clock_setup); - -static void __init ixdp2x01_timer_init(void) -{ - if (!ixdp2x01_clock) - ixdp2x01_clock = 50000000; - - ixp2000_init_time(ixdp2x01_clock); -} - -static struct sys_timer ixdp2x01_timer = { - .init = ixdp2x01_timer_init, - .offset = ixp2000_gettimeoffset, -}; - -/************************************************************************* - * IXDP2x01 PCI - *************************************************************************/ -void __init ixdp2x01_pci_preinit(void) -{ - ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00000000); - ixp2000_pci_preinit(); - pcibios_setup("firmware"); -} - -#define DEVPIN(dev, pin) ((pin) | ((dev) << 3)) - -static int __init ixdp2x01_pci_map_irq(const struct pci_dev *dev, u8 slot, - u8 pin) -{ - u8 bus = dev->bus->number; - u32 devpin = DEVPIN(PCI_SLOT(dev->devfn), pin); - struct pci_bus *tmp_bus = dev->bus; - - /* Primary bus, no interrupts here */ - if (bus == 0) { - return -1; - } - - /* Lookup first leaf in bus tree */ - while ((tmp_bus->parent != NULL) && (tmp_bus->parent->parent != NULL)) { - tmp_bus = tmp_bus->parent; - } - - /* Select between known bridges */ - switch (tmp_bus->self->devfn | (tmp_bus->self->bus->number << 8)) { - /* Device is located after first MB bridge */ - case 0x0008: - if (tmp_bus == dev->bus) { - /* Device is located directly after first MB bridge */ - switch (devpin) { - case DEVPIN(1, 1): /* Onboard 82546 ch 0 */ - if (machine_is_ixdp2401()) - return IRQ_IXDP2401_INTA_82546; - return -1; - case DEVPIN(1, 2): /* Onboard 82546 ch 1 */ - if (machine_is_ixdp2401()) - return IRQ_IXDP2401_INTB_82546; - return -1; - case DEVPIN(0, 1): /* PMC INTA# */ - return IRQ_IXDP2X01_SPCI_PMC_INTA; - case DEVPIN(0, 2): /* PMC INTB# */ - return IRQ_IXDP2X01_SPCI_PMC_INTB; - case DEVPIN(0, 3): /* PMC INTC# */ - return IRQ_IXDP2X01_SPCI_PMC_INTC; - case DEVPIN(0, 4): /* PMC INTD# */ - return IRQ_IXDP2X01_SPCI_PMC_INTD; - } - } - break; - case 0x0010: - if (tmp_bus == dev->bus) { - /* Device is located directly after second MB bridge */ - /* Secondary bus of second bridge */ - switch (devpin) { - case DEVPIN(0, 1): /* DB#0 */ - return IRQ_IXDP2X01_SPCI_DB_0; - case DEVPIN(1, 1): /* DB#1 */ - return IRQ_IXDP2X01_SPCI_DB_1; - } - } else { - /* Device is located indirectly after second MB bridge */ - /* Not supported now */ - } - break; - } - - return -1; -} - - -static int ixdp2x01_pci_setup(int nr, struct pci_sys_data *sys) -{ - sys->mem_offset = 0xe0000000; - - if (machine_is_ixdp2801() || machine_is_ixdp28x5()) - sys->mem_offset -= ((*IXP2000_PCI_ADDR_EXT & 0xE000) << 16); - - return ixp2000_pci_setup(nr, sys); -} - -struct hw_pci ixdp2x01_pci __initdata = { - .nr_controllers = 1, - .setup = ixdp2x01_pci_setup, - .preinit = ixdp2x01_pci_preinit, - .scan = ixp2000_pci_scan_bus, - .map_irq = ixdp2x01_pci_map_irq, -}; - -int __init ixdp2x01_pci_init(void) -{ - if (machine_is_ixdp2401() || machine_is_ixdp2801() ||\ - machine_is_ixdp28x5()) - pci_common_init(&ixdp2x01_pci); - - return 0; -} - -subsys_initcall(ixdp2x01_pci_init); - -/************************************************************************* - * IXDP2x01 Machine Initialization - *************************************************************************/ -static struct flash_platform_data ixdp2x01_flash_platform_data = { - .map_name = "cfi_probe", - .width = 1, -}; - -static unsigned long ixdp2x01_flash_bank_setup(unsigned long ofs) -{ - ixp2000_reg_wrb(IXDP2X01_CPLD_FLASH_REG, - ((ofs >> IXDP2X01_FLASH_WINDOW_BITS) | IXDP2X01_CPLD_FLASH_INTERN)); - return (ofs & IXDP2X01_FLASH_WINDOW_MASK); -} - -static struct ixp2000_flash_data ixdp2x01_flash_data = { - .platform_data = &ixdp2x01_flash_platform_data, - .bank_setup = ixdp2x01_flash_bank_setup -}; - -static struct resource ixdp2x01_flash_resource = { - .start = 0xc4000000, - .end = 0xc4000000 + 0x01ffffff, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device ixdp2x01_flash = { - .name = "IXP2000-Flash", - .id = 0, - .dev = { - .platform_data = &ixdp2x01_flash_data, - }, - .num_resources = 1, - .resource = &ixdp2x01_flash_resource, -}; - -static struct ixp2000_i2c_pins ixdp2x01_i2c_gpio_pins = { - .sda_pin = IXDP2X01_GPIO_SDA, - .scl_pin = IXDP2X01_GPIO_SCL, -}; - -static struct platform_device ixdp2x01_i2c_controller = { - .name = "IXP2000-I2C", - .id = 0, - .dev = { - .platform_data = &ixdp2x01_i2c_gpio_pins, - }, - .num_resources = 0 -}; - -static struct platform_device *ixdp2x01_devices[] __initdata = { - &ixdp2x01_flash, - &ixdp2x01_i2c_controller -}; - -static void __init ixdp2x01_init_machine(void) -{ - ixp2000_reg_wrb(IXDP2X01_CPLD_FLASH_REG, - (IXDP2X01_CPLD_FLASH_BANK_MASK | IXDP2X01_CPLD_FLASH_INTERN)); - - ixdp2x01_flash_data.nr_banks = - ((*IXDP2X01_CPLD_FLASH_REG & IXDP2X01_CPLD_FLASH_BANK_MASK) + 1); - - platform_add_devices(ixdp2x01_devices, ARRAY_SIZE(ixdp2x01_devices)); - ixp2000_uart_init(); - ixdp2x01_uart_init(); -} - -static void ixdp2401_restart(char mode, const char *cmd) -{ - /* - * Reset flash banking register so that we are pointing at - * RedBoot bank. - */ - ixp2000_reg_write(IXDP2X01_CPLD_FLASH_REG, - ((0 >> IXDP2X01_FLASH_WINDOW_BITS) - | IXDP2X01_CPLD_FLASH_INTERN)); - ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0xffffffff); - - ixp2000_restart(mode, cmd); -} - -static void ixdp280x_restart(char mode, const char *cmd) -{ - /* - * On IXDP2801 we need to write this magic sequence to the CPLD - * to cause a complete reset of the CPU and all external devices - * and move the flash bank register back to 0. - */ - unsigned long reset_reg = *IXDP2X01_CPLD_RESET_REG; - - reset_reg = 0x55AA0000 | (reset_reg & 0x0000FFFF); - ixp2000_reg_write(IXDP2X01_CPLD_RESET_REG, reset_reg); - ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0x80000000); - - ixp2000_restart(mode, cmd); -} - -#ifdef CONFIG_ARCH_IXDP2401 -MACHINE_START(IXDP2401, "Intel IXDP2401 Development Platform") - /* Maintainer: MontaVista Software, Inc. */ - .atag_offset = 0x100, - .map_io = ixdp2x01_map_io, - .init_irq = ixdp2x01_init_irq, - .timer = &ixdp2x01_timer, - .init_machine = ixdp2x01_init_machine, - .restart = ixdp2401_restart, -MACHINE_END -#endif - -#ifdef CONFIG_ARCH_IXDP2801 -MACHINE_START(IXDP2801, "Intel IXDP2801 Development Platform") - /* Maintainer: MontaVista Software, Inc. */ - .atag_offset = 0x100, - .map_io = ixdp2x01_map_io, - .init_irq = ixdp2x01_init_irq, - .timer = &ixdp2x01_timer, - .init_machine = ixdp2x01_init_machine, - .restart = ixdp280x_restart, -MACHINE_END - -/* - * IXDP28x5 is basically an IXDP2801 with a different CPU but Intel - * changed the machine ID in the bootloader - */ -MACHINE_START(IXDP28X5, "Intel IXDP2805/2855 Development Platform") - /* Maintainer: MontaVista Software, Inc. */ - .atag_offset = 0x100, - .map_io = ixdp2x01_map_io, - .init_irq = ixdp2x01_init_irq, - .timer = &ixdp2x01_timer, - .init_machine = ixdp2x01_init_machine, - .restart = ixdp280x_restart, -MACHINE_END -#endif - - diff --git a/arch/arm/mach-ixp2000/pci.c b/arch/arm/mach-ixp2000/pci.c deleted file mode 100644 index 9c02de932fa..00000000000 --- a/arch/arm/mach-ixp2000/pci.c +++ /dev/null @@ -1,252 +0,0 @@ -/* - * arch/arm/mach-ixp2000/pci.c - * - * PCI routines for IXDP2400/IXDP2800 boards - * - * Original Author: Naeem Afzal <naeem.m.afzal@intel.com> - * Maintained by: Deepak Saxena <dsaxena@plexity.net> - * - * Copyright 2002 Intel Corp. - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/interrupt.h> -#include <linux/mm.h> -#include <linux/init.h> -#include <linux/ioport.h> -#include <linux/delay.h> -#include <linux/io.h> - -#include <asm/irq.h> -#include <mach/hardware.h> - -#include <asm/mach/pci.h> - -static volatile int pci_master_aborts = 0; - -static int clear_master_aborts(void); - -u32 * -ixp2000_pci_config_addr(unsigned int bus_nr, unsigned int devfn, int where) -{ - u32 *paddress; - - if (PCI_SLOT(devfn) > 7) - return 0; - - /* Must be dword aligned */ - where &= ~3; - - /* - * For top bus, generate type 0, else type 1 - */ - if (!bus_nr) { - /* only bits[23:16] are used for IDSEL */ - paddress = (u32 *) (IXP2000_PCI_CFG0_VIRT_BASE - | (1 << (PCI_SLOT(devfn) + 16)) - | (PCI_FUNC(devfn) << 8) | where); - } else { - paddress = (u32 *) (IXP2000_PCI_CFG1_VIRT_BASE - | (bus_nr << 16) - | (PCI_SLOT(devfn) << 11) - | (PCI_FUNC(devfn) << 8) | where); - } - - return paddress; -} - -/* - * Mask table, bits to mask for quantity of size 1, 2 or 4 bytes. - * 0 and 3 are not valid indexes... - */ -static u32 bytemask[] = { - /*0*/ 0, - /*1*/ 0xff, - /*2*/ 0xffff, - /*3*/ 0, - /*4*/ 0xffffffff, -}; - - -int ixp2000_pci_read_config(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 *value) -{ - u32 n; - u32 *addr; - - n = where % 4; - - addr = ixp2000_pci_config_addr(bus->number, devfn, where); - if (!addr) - return PCIBIOS_DEVICE_NOT_FOUND; - - pci_master_aborts = 0; - *value = (*addr >> (8*n)) & bytemask[size]; - if (pci_master_aborts) { - pci_master_aborts = 0; - *value = 0xffffffff; - return PCIBIOS_DEVICE_NOT_FOUND; - } - - return PCIBIOS_SUCCESSFUL; -} - -/* - * We don't do error checks by calling clear_master_aborts() b/c the - * assumption is that the caller did a read first to make sure a device - * exists. - */ -int ixp2000_pci_write_config(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 value) -{ - u32 mask; - u32 *addr; - u32 temp; - - mask = ~(bytemask[size] << ((where % 0x4) * 8)); - addr = ixp2000_pci_config_addr(bus->number, devfn, where); - if (!addr) - return PCIBIOS_DEVICE_NOT_FOUND; - temp = (u32) (value) << ((where % 0x4) * 8); - *addr = (*addr & mask) | temp; - - clear_master_aborts(); - - return PCIBIOS_SUCCESSFUL; -} - - -static struct pci_ops ixp2000_pci_ops = { - .read = ixp2000_pci_read_config, - .write = ixp2000_pci_write_config -}; - -struct pci_bus *ixp2000_pci_scan_bus(int nr, struct pci_sys_data *sysdata) -{ - return pci_scan_root_bus(NULL, sysdata->busnr, &ixp2000_pci_ops, - sysdata, &sysdata->resources); -} - - -int ixp2000_pci_abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *regs) -{ - - volatile u32 temp; - unsigned long flags; - - pci_master_aborts = 1; - - local_irq_save(flags); - temp = *(IXP2000_PCI_CONTROL); - if (temp & ((1 << 8) | (1 << 5))) { - ixp2000_reg_wrb(IXP2000_PCI_CONTROL, temp); - } - - temp = *(IXP2000_PCI_CMDSTAT); - if (temp & (1 << 29)) { - while (temp & (1 << 29)) { - ixp2000_reg_write(IXP2000_PCI_CMDSTAT, temp); - temp = *(IXP2000_PCI_CMDSTAT); - } - } - local_irq_restore(flags); - - /* - * If it was an imprecise abort, then we need to correct the - * return address to be _after_ the instruction. - */ - if (fsr & (1 << 10)) - regs->ARM_pc += 4; - - return 0; -} - -int -clear_master_aborts(void) -{ - volatile u32 temp; - unsigned long flags; - - local_irq_save(flags); - temp = *(IXP2000_PCI_CONTROL); - if (temp & ((1 << 8) | (1 << 5))) { - ixp2000_reg_wrb(IXP2000_PCI_CONTROL, temp); - } - - temp = *(IXP2000_PCI_CMDSTAT); - if (temp & (1 << 29)) { - while (temp & (1 << 29)) { - ixp2000_reg_write(IXP2000_PCI_CMDSTAT, temp); - temp = *(IXP2000_PCI_CMDSTAT); - } - } - local_irq_restore(flags); - - return 0; -} - -void __init -ixp2000_pci_preinit(void) -{ - pci_set_flags(0); - - pcibios_min_io = 0; - pcibios_min_mem = 0; - -#ifndef CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO - /* - * Configure the PCI unit to properly byteswap I/O transactions, - * and verify that it worked. - */ - ixp2000_reg_write(IXP2000_PCI_CONTROL, - (*IXP2000_PCI_CONTROL | PCI_CONTROL_IEE)); - - if ((*IXP2000_PCI_CONTROL & PCI_CONTROL_IEE) == 0) - panic("IXP2000: PCI I/O is broken on this ixp model, and " - "the needed workaround has not been configured in"); -#endif - - hook_fault_code(16+6, ixp2000_pci_abort_handler, SIGBUS, 0, - "PCI config cycle to non-existent device"); -} - - -/* - * IXP2000 systems often have large resource requirements, so we just - * use our own resource space. - */ -static struct resource ixp2000_pci_mem_space = { - .start = 0xe0000000, - .end = 0xffffffff, - .flags = IORESOURCE_MEM, - .name = "PCI Mem Space" -}; - -static struct resource ixp2000_pci_io_space = { - .start = 0x00010000, - .end = 0x0001ffff, - .flags = IORESOURCE_IO, - .name = "PCI I/O Space" -}; - -int ixp2000_pci_setup(int nr, struct pci_sys_data *sys) -{ - if (nr >= 1) - return 0; - - pci_add_resource_offset(&sys->resources, - &ixp2000_pci_io_space, sys->io_offset); - pci_add_resource_offset(&sys->resources, - &ixp2000_pci_mem_space, sys->mem_offset); - - return 1; -} - diff --git a/arch/arm/mach-ixp23xx/Kconfig b/arch/arm/mach-ixp23xx/Kconfig deleted file mode 100644 index 982670ec386..00000000000 --- a/arch/arm/mach-ixp23xx/Kconfig +++ /dev/null @@ -1,25 +0,0 @@ -if ARCH_IXP23XX - -config ARCH_SUPPORTS_BIG_ENDIAN - bool - default y - -menu "Intel IXP23xx Implementation Options" - -comment "IXP23xx Platforms" - -config MACH_ESPRESSO - bool "Support IP Fabrics Double Espresso platform" - help - -config MACH_IXDP2351 - bool "Support Intel IXDP2351 platform" - help - -config MACH_ROADRUNNER - bool "Support ADI RoadRunner platform" - help - -endmenu - -endif diff --git a/arch/arm/mach-ixp23xx/Makefile b/arch/arm/mach-ixp23xx/Makefile deleted file mode 100644 index 288b371b6d0..00000000000 --- a/arch/arm/mach-ixp23xx/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# -# Makefile for the linux kernel. -# -obj-y := core.o pci.o -obj-m := -obj-n := -obj- := - -obj-$(CONFIG_MACH_ESPRESSO) += espresso.o -obj-$(CONFIG_MACH_IXDP2351) += ixdp2351.o -obj-$(CONFIG_MACH_ROADRUNNER) += roadrunner.o diff --git a/arch/arm/mach-ixp23xx/Makefile.boot b/arch/arm/mach-ixp23xx/Makefile.boot deleted file mode 100644 index 44fb4a717c3..00000000000 --- a/arch/arm/mach-ixp23xx/Makefile.boot +++ /dev/null @@ -1,2 +0,0 @@ - zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c deleted file mode 100644 index d3454242599..00000000000 --- a/arch/arm/mach-ixp23xx/core.c +++ /dev/null @@ -1,455 +0,0 @@ -/* - * arch/arm/mach-ixp23xx/core.c - * - * Core routines for IXP23xx chips - * - * Author: Deepak Saxena <dsaxena@plexity.net> - * - * Copyright 2005 (c) MontaVista Software, Inc. - * - * Based on 2.4 code Copyright 2004 (c) Intel Corporation - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/spinlock.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/serial.h> -#include <linux/tty.h> -#include <linux/bitops.h> -#include <linux/serial_8250.h> -#include <linux/serial_core.h> -#include <linux/device.h> -#include <linux/mm.h> -#include <linux/time.h> -#include <linux/timex.h> - -#include <asm/types.h> -#include <asm/setup.h> -#include <asm/memory.h> -#include <mach/hardware.h> -#include <asm/irq.h> -#include <asm/tlbflush.h> -#include <asm/pgtable.h> -#include <asm/system_misc.h> - -#include <asm/mach/map.h> -#include <asm/mach/time.h> -#include <asm/mach/irq.h> -#include <asm/mach/arch.h> - - -/************************************************************************* - * Chip specific mappings shared by all IXP23xx systems - *************************************************************************/ -static struct map_desc ixp23xx_io_desc[] __initdata = { - { /* XSI-CPP CSRs */ - .virtual = IXP23XX_XSI2CPP_CSR_VIRT, - .pfn = __phys_to_pfn(IXP23XX_XSI2CPP_CSR_PHYS), - .length = IXP23XX_XSI2CPP_CSR_SIZE, - .type = MT_DEVICE, - }, { /* Expansion Bus Config */ - .virtual = IXP23XX_EXP_CFG_VIRT, - .pfn = __phys_to_pfn(IXP23XX_EXP_CFG_PHYS), - .length = IXP23XX_EXP_CFG_SIZE, - .type = MT_DEVICE, - }, { /* UART, Interrupt ctrl, GPIO, timers, NPEs, MACS,.... */ - .virtual = IXP23XX_PERIPHERAL_VIRT, - .pfn = __phys_to_pfn(IXP23XX_PERIPHERAL_PHYS), - .length = IXP23XX_PERIPHERAL_SIZE, - .type = MT_DEVICE, - }, { /* CAP CSRs */ - .virtual = IXP23XX_CAP_CSR_VIRT, - .pfn = __phys_to_pfn(IXP23XX_CAP_CSR_PHYS), - .length = IXP23XX_CAP_CSR_SIZE, - .type = MT_DEVICE, - }, { /* MSF CSRs */ - .virtual = IXP23XX_MSF_CSR_VIRT, - .pfn = __phys_to_pfn(IXP23XX_MSF_CSR_PHYS), - .length = IXP23XX_MSF_CSR_SIZE, - .type = MT_DEVICE, - }, { /* PCI I/O Space */ - .virtual = IXP23XX_PCI_IO_VIRT, - .pfn = __phys_to_pfn(IXP23XX_PCI_IO_PHYS), - .length = IXP23XX_PCI_IO_SIZE, - .type = MT_DEVICE, - }, { /* PCI Config Space */ - .virtual = IXP23XX_PCI_CFG_VIRT, - .pfn = __phys_to_pfn(IXP23XX_PCI_CFG_PHYS), - .length = IXP23XX_PCI_CFG_SIZE, - .type = MT_DEVICE, - }, { /* PCI local CFG CSRs */ - .virtual = IXP23XX_PCI_CREG_VIRT, - .pfn = __phys_to_pfn(IXP23XX_PCI_CREG_PHYS), - .length = IXP23XX_PCI_CREG_SIZE, - .type = MT_DEVICE, - }, { /* PCI MEM Space */ - .virtual = IXP23XX_PCI_MEM_VIRT, - .pfn = __phys_to_pfn(IXP23XX_PCI_MEM_PHYS), - .length = IXP23XX_PCI_MEM_SIZE, - .type = MT_DEVICE, - } -}; - -void __init ixp23xx_map_io(void) -{ - iotable_init(ixp23xx_io_desc, ARRAY_SIZE(ixp23xx_io_desc)); -} - - -/*************************************************************************** - * IXP23xx Interrupt Handling - ***************************************************************************/ -enum ixp23xx_irq_type { - IXP23XX_IRQ_LEVEL, IXP23XX_IRQ_EDGE -}; - -static void ixp23xx_config_irq(unsigned int, enum ixp23xx_irq_type); - -static int ixp23xx_irq_set_type(struct irq_data *d, unsigned int type) -{ - int line = d->irq - IRQ_IXP23XX_GPIO6 + 6; - u32 int_style; - enum ixp23xx_irq_type irq_type; - volatile u32 *int_reg; - - /* - * Only GPIOs 6-15 are wired to interrupts on IXP23xx - */ - if (line < 6 || line > 15) - return -EINVAL; - - switch (type) { - case IRQ_TYPE_EDGE_BOTH: - int_style = IXP23XX_GPIO_STYLE_TRANSITIONAL; - irq_type = IXP23XX_IRQ_EDGE; - break; - case IRQ_TYPE_EDGE_RISING: - int_style = IXP23XX_GPIO_STYLE_RISING_EDGE; - irq_type = IXP23XX_IRQ_EDGE; - break; - case IRQ_TYPE_EDGE_FALLING: - int_style = IXP23XX_GPIO_STYLE_FALLING_EDGE; - irq_type = IXP23XX_IRQ_EDGE; - break; - case IRQ_TYPE_LEVEL_HIGH: - int_style = IXP23XX_GPIO_STYLE_ACTIVE_HIGH; - irq_type = IXP23XX_IRQ_LEVEL; - break; - case IRQ_TYPE_LEVEL_LOW: - int_style = IXP23XX_GPIO_STYLE_ACTIVE_LOW; - irq_type = IXP23XX_IRQ_LEVEL; - break; - default: - return -EINVAL; - } - - ixp23xx_config_irq(d->irq, irq_type); - - if (line >= 8) { /* pins 8-15 */ - line -= 8; - int_reg = (volatile u32 *)IXP23XX_GPIO_GPIT2R; - } else { /* pins 0-7 */ - int_reg = (volatile u32 *)IXP23XX_GPIO_GPIT1R; - } - - /* - * Clear pending interrupts - */ - *IXP23XX_GPIO_GPISR = (1 << line); - - /* Clear the style for the appropriate pin */ - *int_reg &= ~(IXP23XX_GPIO_STYLE_MASK << - (line * IXP23XX_GPIO_STYLE_SIZE)); - - /* Set the new style */ - *int_reg |= (int_style << (line * IXP23XX_GPIO_STYLE_SIZE)); - - return 0; -} - -static void ixp23xx_irq_mask(struct irq_data *d) -{ - volatile unsigned long *intr_reg; - unsigned int irq = d->irq; - - if (irq >= 56) - irq += 8; - - intr_reg = IXP23XX_INTR_EN1 + (irq / 32); - *intr_reg &= ~(1 << (irq % 32)); -} - -static void ixp23xx_irq_ack(struct irq_data *d) -{ - int line = d->irq - IRQ_IXP23XX_GPIO6 + 6; - - if ((line < 6) || (line > 15)) - return; - - *IXP23XX_GPIO_GPISR = (1 << line); -} - -/* - * Level triggered interrupts on GPIO lines can only be cleared when the - * interrupt condition disappears. - */ -static void ixp23xx_irq_level_unmask(struct irq_data *d) -{ - volatile unsigned long *intr_reg; - unsigned int irq = d->irq; - - ixp23xx_irq_ack(d); - - if (irq >= 56) - irq += 8; - - intr_reg = IXP23XX_INTR_EN1 + (irq / 32); - *intr_reg |= (1 << (irq % 32)); -} - -static void ixp23xx_irq_edge_unmask(struct irq_data *d) -{ - volatile unsigned long *intr_reg; - unsigned int irq = d->irq; - - if (irq >= 56) - irq += 8; - - intr_reg = IXP23XX_INTR_EN1 + (irq / 32); - *intr_reg |= (1 << (irq % 32)); -} - -static struct irq_chip ixp23xx_irq_level_chip = { - .irq_ack = ixp23xx_irq_mask, - .irq_mask = ixp23xx_irq_mask, - .irq_unmask = ixp23xx_irq_level_unmask, - .irq_set_type = ixp23xx_irq_set_type -}; - -static struct irq_chip ixp23xx_irq_edge_chip = { - .irq_ack = ixp23xx_irq_ack, - .irq_mask = ixp23xx_irq_mask, - .irq_unmask = ixp23xx_irq_edge_unmask, - .irq_set_type = ixp23xx_irq_set_type -}; - -static void ixp23xx_pci_irq_mask(struct irq_data *d) -{ - unsigned int irq = d->irq; - - *IXP23XX_PCI_XSCALE_INT_ENABLE &= ~(1 << (IRQ_IXP23XX_INTA + 27 - irq)); -} - -static void ixp23xx_pci_irq_unmask(struct irq_data *d) -{ - unsigned int irq = d->irq; - - *IXP23XX_PCI_XSCALE_INT_ENABLE |= (1 << (IRQ_IXP23XX_INTA + 27 - irq)); -} - -/* - * TODO: Should this just be done at ASM level? - */ -static void pci_handler(unsigned int irq, struct irq_desc *desc) -{ - u32 pci_interrupt; - unsigned int irqno; - - pci_interrupt = *IXP23XX_PCI_XSCALE_INT_STATUS; - - desc->irq_data.chip->irq_ack(&desc->irq_data); - - /* See which PCI_INTA, or PCI_INTB interrupted */ - if (pci_interrupt & (1 << 26)) { - irqno = IRQ_IXP23XX_INTB; - } else if (pci_interrupt & (1 << 27)) { - irqno = IRQ_IXP23XX_INTA; - } else { - BUG(); - } - - generic_handle_irq(irqno); - - desc->irq_data.chip->irq_unmask(&desc->irq_data); -} - -static struct irq_chip ixp23xx_pci_irq_chip = { - .irq_ack = ixp23xx_pci_irq_mask, - .irq_mask = ixp23xx_pci_irq_mask, - .irq_unmask = ixp23xx_pci_irq_unmask -}; - -static void ixp23xx_config_irq(unsigned int irq, enum ixp23xx_irq_type type) -{ - switch (type) { - case IXP23XX_IRQ_LEVEL: - irq_set_chip_and_handler(irq, &ixp23xx_irq_level_chip, - handle_level_irq); - break; - case IXP23XX_IRQ_EDGE: - irq_set_chip_and_handler(irq, &ixp23xx_irq_edge_chip, - handle_edge_irq); - break; - } - set_irq_flags(irq, IRQF_VALID); -} - -void __init ixp23xx_init_irq(void) -{ - int irq; - - /* Route everything to IRQ */ - *IXP23XX_INTR_SEL1 = 0x0; - *IXP23XX_INTR_SEL2 = 0x0; - *IXP23XX_INTR_SEL3 = 0x0; - *IXP23XX_INTR_SEL4 = 0x0; - - /* Mask all sources */ - *IXP23XX_INTR_EN1 = 0x0; - *IXP23XX_INTR_EN2 = 0x0; - *IXP23XX_INTR_EN3 = 0x0; - *IXP23XX_INTR_EN4 = 0x0; - - /* - * Configure all IRQs for level-sensitive operation - */ - for (irq = 0; irq <= NUM_IXP23XX_RAW_IRQS; irq++) { - ixp23xx_config_irq(irq, IXP23XX_IRQ_LEVEL); - } - - for (irq = IRQ_IXP23XX_INTA; irq <= IRQ_IXP23XX_INTB; irq++) { - irq_set_chip_and_handler(irq, &ixp23xx_pci_irq_chip, - handle_level_irq); - set_irq_flags(irq, IRQF_VALID); - } - - irq_set_chained_handler(IRQ_IXP23XX_PCI_INT_RPH, pci_handler); -} - - -/************************************************************************* - * Timer-tick functions for IXP23xx - *************************************************************************/ -#define CLOCK_TICKS_PER_USEC (CLOCK_TICK_RATE / USEC_PER_SEC) - -static unsigned long next_jiffy_time; - -static unsigned long -ixp23xx_gettimeoffset(void) -{ - unsigned long elapsed; - - elapsed = *IXP23XX_TIMER_CONT - (next_jiffy_time - LATCH); - - return elapsed / CLOCK_TICKS_PER_USEC; -} - -static irqreturn_t -ixp23xx_timer_interrupt(int irq, void *dev_id) -{ - /* Clear Pending Interrupt by writing '1' to it */ - *IXP23XX_TIMER_STATUS = IXP23XX_TIMER1_INT_PEND; - while ((signed long)(*IXP23XX_TIMER_CONT - next_jiffy_time) >= LATCH) { - timer_tick(); - next_jiffy_time += LATCH; - } - - return IRQ_HANDLED; -} - -static struct irqaction ixp23xx_timer_irq = { - .name = "IXP23xx Timer Tick", - .handler = ixp23xx_timer_interrupt, - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, -}; - -void __init ixp23xx_init_timer(void) -{ - /* Clear Pending Interrupt by writing '1' to it */ - *IXP23XX_TIMER_STATUS = IXP23XX_TIMER1_INT_PEND; - - /* Setup the Timer counter value */ - *IXP23XX_TIMER1_RELOAD = - (LATCH & ~IXP23XX_TIMER_RELOAD_MASK) | IXP23XX_TIMER_ENABLE; - - *IXP23XX_TIMER_CONT = 0; - next_jiffy_time = LATCH; - - /* Connect the interrupt handler and enable the interrupt */ - setup_irq(IRQ_IXP23XX_TIMER1, &ixp23xx_timer_irq); -} - -struct sys_timer ixp23xx_timer = { - .init = ixp23xx_init_timer, - .offset = ixp23xx_gettimeoffset, -}; - - -/************************************************************************* - * IXP23xx Platform Initialization - *************************************************************************/ -static struct resource ixp23xx_uart_resources[] = { - { - .start = IXP23XX_UART1_PHYS, - .end = IXP23XX_UART1_PHYS + 0x0fff, - .flags = IORESOURCE_MEM - }, { - .start = IXP23XX_UART2_PHYS, - .end = IXP23XX_UART2_PHYS + 0x0fff, - .flags = IORESOURCE_MEM - } -}; - -static struct plat_serial8250_port ixp23xx_uart_data[] = { - { - .mapbase = IXP23XX_UART1_PHYS, - .membase = (char *)(IXP23XX_UART1_VIRT + 3), - .irq = IRQ_IXP23XX_UART1, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = IXP23XX_UART_XTAL, - }, { - .mapbase = IXP23XX_UART2_PHYS, - .membase = (char *)(IXP23XX_UART2_VIRT + 3), - .irq = IRQ_IXP23XX_UART2, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = IXP23XX_UART_XTAL, - }, - { }, -}; - -static struct platform_device ixp23xx_uart = { - .name = "serial8250", - .id = 0, - .dev.platform_data = ixp23xx_uart_data, - .num_resources = 2, - .resource = ixp23xx_uart_resources, -}; - -static struct platform_device *ixp23xx_devices[] __initdata = { - &ixp23xx_uart, -}; - -void __init ixp23xx_sys_init(void) -{ - /* by default, the idle code is disabled */ - disable_hlt(); - - *IXP23XX_EXP_UNIT_FUSE |= 0xf; - platform_add_devices(ixp23xx_devices, ARRAY_SIZE(ixp23xx_devices)); -} - -void ixp23xx_restart(char mode, const char *cmd) -{ - /* Use on-chip reset capability */ - *IXP23XX_RESET0 |= IXP23XX_RST_ALL; -} diff --git a/arch/arm/mach-ixp23xx/espresso.c b/arch/arm/mach-ixp23xx/espresso.c deleted file mode 100644 index d142d45dea1..00000000000 --- a/arch/arm/mach-ixp23xx/espresso.c +++ /dev/null @@ -1,93 +0,0 @@ -/* - * arch/arm/mach-ixp23xx/espresso.c - * - * Double Espresso-specific routines - * - * Author: Lennert Buytenhek <buytenh@wantstofly.org> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/spinlock.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/serial.h> -#include <linux/tty.h> -#include <linux/bitops.h> -#include <linux/ioport.h> -#include <linux/serial_8250.h> -#include <linux/serial_core.h> -#include <linux/device.h> -#include <linux/mm.h> -#include <linux/pci.h> -#include <linux/mtd/physmap.h> - -#include <asm/types.h> -#include <asm/setup.h> -#include <asm/memory.h> -#include <mach/hardware.h> -#include <asm/mach-types.h> -#include <asm/irq.h> -#include <asm/tlbflush.h> -#include <asm/pgtable.h> - -#include <asm/mach/map.h> -#include <asm/mach/irq.h> -#include <asm/mach/arch.h> -#include <asm/mach/pci.h> - -static int __init espresso_pci_init(void) -{ - if (machine_is_espresso()) - ixp23xx_pci_slave_init(); - - return 0; -}; -subsys_initcall(espresso_pci_init); - -static struct physmap_flash_data espresso_flash_data = { - .width = 2, -}; - -static struct resource espresso_flash_resource = { - .start = 0x90000000, - .end = 0x91ffffff, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device espresso_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &espresso_flash_data, - }, - .num_resources = 1, - .resource = &espresso_flash_resource, -}; - -static void __init espresso_init(void) -{ - platform_device_register(&espresso_flash); - - /* - * Mark flash as writeable. - */ - IXP23XX_EXP_CS0[0] |= IXP23XX_FLASH_WRITABLE; - IXP23XX_EXP_CS0[1] |= IXP23XX_FLASH_WRITABLE; - - ixp23xx_sys_init(); -} - -MACHINE_START(ESPRESSO, "IP Fabrics Double Espresso") - /* Maintainer: Lennert Buytenhek */ - .map_io = ixp23xx_map_io, - .init_irq = ixp23xx_init_irq, - .timer = &ixp23xx_timer, - .atag_offset = 0x100, - .init_machine = espresso_init, - .restart = ixp23xx_restart, -MACHINE_END diff --git a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S deleted file mode 100644 index 5ff524c1374..00000000000 --- a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S +++ /dev/null @@ -1,25 +0,0 @@ -/* - * arch/arm/mach-ixp23xx/include/mach/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <mach/ixp23xx.h> - - .macro addruart, rp, rv, tmp - ldr \rp, =IXP23XX_PERIPHERAL_PHYS @ physical - ldr \rv, =IXP23XX_PERIPHERAL_VIRT @ virtual -#ifdef __ARMEB__ - orr \rp, \rp, #0x00000003 - orr \rv, \rv, #0x00000003 -#endif - .endm - -#define UART_SHIFT 2 -#include <asm/hardware/debug-8250.S> diff --git a/arch/arm/mach-ixp23xx/include/mach/entry-macro.S b/arch/arm/mach-ixp23xx/include/mach/entry-macro.S deleted file mode 100644 index 3fd2cb984e4..00000000000 --- a/arch/arm/mach-ixp23xx/include/mach/entry-macro.S +++ /dev/null @@ -1,31 +0,0 @@ -/* - * arch/arm/mach-ixp23xx/include/mach/entry-macro.S - */ - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \irqnr, =(IXP23XX_INTC_VIRT + IXP23XX_INTR_IRQ_ENC_ST_OFFSET) - ldr \irqnr, [\irqnr] @ get interrupt number - cmp \irqnr, #0x0 @ spurious interrupt ? - movne \irqnr, \irqnr, lsr #2 @ skip unwanted low order bits - subne \irqnr, \irqnr, #1 @ convert to 0 based - -#if 0 - cmp \irqnr, #IRQ_IXP23XX_PCI_INT_RPH - bne 1001f - mov \irqnr, #IRQ_IXP23XX_INTA - - ldr \irqnr, =0xf5000030 - - mov \tmp, #(1<<26) - tst \irqnr, \tmp - movne \irqnr, #IRQ_IXP23XX_INTB - - mov \tmp, #(1<<27) - tst \irqnr, \tmp - movne \irqnr, #IRQ_IXP23XX_INTA -1001: -#endif - .endm diff --git a/arch/arm/mach-ixp23xx/include/mach/hardware.h b/arch/arm/mach-ixp23xx/include/mach/hardware.h deleted file mode 100644 index 60e55fa1023..00000000000 --- a/arch/arm/mach-ixp23xx/include/mach/hardware.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * arch/arm/mach-ixp23xx/include/mach/hardware.h - * - * Copyright (C) 2002-2004 Intel Corporation. - * Copyricht (C) 2005 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Hardware definitions for IXP23XX based systems - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -/* PCI IO info */ - -#include "ixp23xx.h" - -/* - * Platform helper functions - */ -#include "platform.h" - -/* - * Platform-specific headers - */ -#include "ixdp2351.h" - - -#endif diff --git a/arch/arm/mach-ixp23xx/include/mach/io.h b/arch/arm/mach-ixp23xx/include/mach/io.h deleted file mode 100644 index a7aceb55c13..00000000000 --- a/arch/arm/mach-ixp23xx/include/mach/io.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * arch/arm/mach-ixp23xx/include/mach/io.h - * - * Original Author: Naeem M Afzal <naeem.m.afzal@intel.com> - * Maintainer: Deepak Saxena <dsaxena@plexity.net> - * - * Copyright (C) 2003-2005 Intel Corp. - * Copyright (C) 2005 MontaVista Software, Inc - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_IO_H -#define __ASM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -#define __io(p) ((void __iomem*)((p) + IXP23XX_PCI_IO_VIRT)) - -#endif diff --git a/arch/arm/mach-ixp23xx/include/mach/irqs.h b/arch/arm/mach-ixp23xx/include/mach/irqs.h deleted file mode 100644 index 3af33a04b8a..00000000000 --- a/arch/arm/mach-ixp23xx/include/mach/irqs.h +++ /dev/null @@ -1,223 +0,0 @@ -/* - * arch/arm/mach-ixp23xx/include/mach/irqs.h - * - * IRQ definitions for IXP23XX based systems - * - * Author: Naeem Afzal <naeem.m.afzal@intel.com> - * - * Copyright (C) 2003-2004 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - -#define NR_IXP23XX_IRQS IRQ_IXP23XX_INTB+1 -#define IRQ_IXP23XX_EXTIRQS NR_IXP23XX_IRQS - - -#define IRQ_IXP23XX_DBG0 0 /* Debug/Execution/MBox */ -#define IRQ_IXP23XX_DBG1 1 /* Debug/Execution/MBox */ -#define IRQ_IXP23XX_NPE_TRG 2 /* npe_trigger */ -#define IRQ_IXP23XX_TIMER1 3 /* Timer[0] */ -#define IRQ_IXP23XX_TIMER2 4 /* Timer[1] */ -#define IRQ_IXP23XX_TIMESTAMP 5 /* Timer[2], Time-stamp */ -#define IRQ_IXP23XX_WDOG 6 /* Time[3], Watchdog Timer */ -#define IRQ_IXP23XX_PCI_DBELL 7 /* PCI Doorbell */ -#define IRQ_IXP23XX_PCI_DMA1 8 /* PCI DMA Channel 1 */ -#define IRQ_IXP23XX_PCI_DMA2 9 /* PCI DMA Channel 2 */ -#define IRQ_IXP23XX_PCI_DMA3 10 /* PCI DMA Channel 3 */ -#define IRQ_IXP23XX_PCI_INT_RPH 11 /* pcxg_pci_int_rph */ -#define IRQ_IXP23XX_CPP_PMU 12 /* xpxg_pm_int_rpl */ -#define IRQ_IXP23XX_SWINT0 13 /* S/W Interrupt0 */ -#define IRQ_IXP23XX_SWINT1 14 /* S/W Interrupt1 */ -#define IRQ_IXP23XX_UART2 15 /* UART1 Interrupt */ -#define IRQ_IXP23XX_UART1 16 /* UART0 Interrupt */ -#define IRQ_IXP23XX_XSI_PMU_ROLLOVER 17 /* AHB Performance M. Unit counter rollover */ -#define IRQ_IXP23XX_XSI_AHB_PM0 18 /* intr_pm_o */ -#define IRQ_IXP23XX_XSI_AHB_ECE0 19 /* intr_ece_o */ -#define IRQ_IXP23XX_XSI_AHB_GASKET 20 /* gas_intr_o */ -#define IRQ_IXP23XX_XSI_CPP 21 /* xsi2cpp_int */ -#define IRQ_IXP23XX_CPP_XSI 22 /* cpp2xsi_int */ -#define IRQ_IXP23XX_ME_ATTN0 23 /* ME_ATTN */ -#define IRQ_IXP23XX_ME_ATTN1 24 /* ME_ATTN */ -#define IRQ_IXP23XX_ME_ATTN2 25 /* ME_ATTN */ -#define IRQ_IXP23XX_ME_ATTN3 26 /* ME_ATTN */ -#define IRQ_IXP23XX_PCI_ERR_RPH 27 /* PCXG_PCI_ERR_RPH */ -#define IRQ_IXP23XX_D0XG_ECC_CORR 28 /* D0XG_DRAM_ECC_CORR */ -#define IRQ_IXP23XX_D0XG_ECC_UNCORR 29 /* D0XG_DRAM_ECC_UNCORR */ -#define IRQ_IXP23XX_SRAM_ERR1 30 /* SRAM1_ERR */ -#define IRQ_IXP23XX_SRAM_ERR0 31 /* SRAM0_ERR */ -#define IRQ_IXP23XX_MEDIA_ERR 32 /* MEDIA_ERR */ -#define IRQ_IXP23XX_STH_DRAM_ECC_MAJ 33 /* STH_DRAM0_ECC_MAJ */ -#define IRQ_IXP23XX_GPIO6 34 /* GPIO0 interrupts */ -#define IRQ_IXP23XX_GPIO7 35 /* GPIO1 interrupts */ -#define IRQ_IXP23XX_GPIO8 36 /* GPIO2 interrupts */ -#define IRQ_IXP23XX_GPIO9 37 /* GPIO3 interrupts */ -#define IRQ_IXP23XX_GPIO10 38 /* GPIO4 interrupts */ -#define IRQ_IXP23XX_GPIO11 39 /* GPIO5 interrupts */ -#define IRQ_IXP23XX_GPIO12 40 /* GPIO6 interrupts */ -#define IRQ_IXP23XX_GPIO13 41 /* GPIO7 interrupts */ -#define IRQ_IXP23XX_GPIO14 42 /* GPIO8 interrupts */ -#define IRQ_IXP23XX_GPIO15 43 /* GPIO9 interrupts */ -#define IRQ_IXP23XX_SHAC_RING0 44 /* SHAC Ring Full */ -#define IRQ_IXP23XX_SHAC_RING1 45 /* SHAC Ring Full */ -#define IRQ_IXP23XX_SHAC_RING2 46 /* SHAC Ring Full */ -#define IRQ_IXP23XX_SHAC_RING3 47 /* SHAC Ring Full */ -#define IRQ_IXP23XX_SHAC_RING4 48 /* SHAC Ring Full */ -#define IRQ_IXP23XX_SHAC_RING5 49 /* SHAC Ring Full */ -#define IRQ_IXP23XX_SHAC_RING6 50 /* SHAC RING Full */ -#define IRQ_IXP23XX_SHAC_RING7 51 /* SHAC Ring Full */ -#define IRQ_IXP23XX_SHAC_RING8 52 /* SHAC Ring Full */ -#define IRQ_IXP23XX_SHAC_RING9 53 /* SHAC Ring Full */ -#define IRQ_IXP23XX_SHAC_RING10 54 /* SHAC Ring Full */ -#define IRQ_IXP23XX_SHAC_RING11 55 /* SHAC Ring Full */ -#define IRQ_IXP23XX_ME_THREAD_A0_ME0 56 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A1_ME0 57 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A2_ME0 58 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A3_ME0 59 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A4_ME0 60 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A5_ME0 61 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A6_ME0 62 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A7_ME0 63 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A8_ME1 64 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A9_ME1 65 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A10_ME1 66 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A11_ME1 67 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A12_ME1 68 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A13_ME1 69 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A14_ME1 70 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A15_ME1 71 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A16_ME2 72 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A17_ME2 73 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A18_ME2 74 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A19_ME2 75 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A20_ME2 76 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A21_ME2 77 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A22_ME2 78 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A23_ME2 79 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A24_ME3 80 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A25_ME3 81 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A26_ME3 82 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A27_ME3 83 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A28_ME3 84 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A29_ME3 85 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A30_ME3 86 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A31_ME3 87 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_B0_ME0 88 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B1_ME0 89 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B2_ME0 90 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B3_ME0 91 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B4_ME0 92 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B5_ME0 93 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B6_ME0 94 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B7_ME0 95 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B8_ME1 96 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B9_ME1 97 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B10_ME1 98 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B11_ME1 99 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B12_ME1 100 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B13_ME1 101 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B14_ME1 102 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B15_ME1 103 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B16_ME2 104 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B17_ME2 105 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B18_ME2 106 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B19_ME2 107 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B20_ME2 108 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B21_ME2 109 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B22_ME2 110 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B23_ME2 111 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B24_ME3 112 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B25_ME3 113 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B26_ME3 114 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B27_ME3 115 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B28_ME3 116 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B29_ME3 117 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B30_ME3 118 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B31_ME3 119 /* ME_THREAD_B */ - -#define NUM_IXP23XX_RAW_IRQS 120 - -#define IRQ_IXP23XX_INTA 120 /* Indirect pcxg_pci_int_rph */ -#define IRQ_IXP23XX_INTB 121 /* Indirect pcxg_pci_int_rph */ - -#define NR_IXP23XX_IRQ (IRQ_IXP23XX_INTB + 1) - -/* - * We default to 32 per-board IRQs. Increase this number if you need - * more, but keep it realistic. - */ -#define NR_IXP23XX_MACH_IRQS 32 - -#define NR_IRQS (NR_IXP23XX_IRQS + NR_IXP23XX_MACH_IRQS) - -#define IXP23XX_MACH_IRQ(irq) (NR_IXP23XX_IRQ + (irq)) - - -/* - * IXDP2351-specific interrupts - */ - -/* - * External PCI interrupts signaled through INTB - * - */ -#define IXDP2351_INTB_IRQ_BASE 0 -#define IRQ_IXDP2351_INTA_82546 IXP23XX_MACH_IRQ(0) -#define IRQ_IXDP2351_INTB_82546 IXP23XX_MACH_IRQ(1) -#define IRQ_IXDP2351_SPCI_DB_0 IXP23XX_MACH_IRQ(2) -#define IRQ_IXDP2351_SPCI_DB_1 IXP23XX_MACH_IRQ(3) -#define IRQ_IXDP2351_SPCI_PMC_INTA IXP23XX_MACH_IRQ(4) -#define IRQ_IXDP2351_SPCI_PMC_INTB IXP23XX_MACH_IRQ(5) -#define IRQ_IXDP2351_SPCI_PMC_INTC IXP23XX_MACH_IRQ(6) -#define IRQ_IXDP2351_SPCI_PMC_INTD IXP23XX_MACH_IRQ(7) -#define IRQ_IXDP2351_SPCI_FIC IXP23XX_MACH_IRQ(8) - -#define IXDP2351_INTB_IRQ_BIT(irq) (irq - IXP23XX_MACH_IRQ(0)) -#define IXDP2351_INTB_IRQ_MASK(irq) (1 << IXDP2351_INTB_IRQ_BIT(irq)) -#define IXDP2351_INTB_IRQ_VALID 0x01FF -#define IXDP2351_INTB_IRQ_NUM 16 - -/* - * Other external interrupts signaled through INTA - */ -#define IXDP2351_INTA_IRQ_BASE 16 -#define IRQ_IXDP2351_IPMI_FROM IXP23XX_MACH_IRQ(16) -#define IRQ_IXDP2351_125US IXP23XX_MACH_IRQ(17) -#define IRQ_IXDP2351_DB_0_ADD IXP23XX_MACH_IRQ(18) -#define IRQ_IXDP2351_DB_1_ADD IXP23XX_MACH_IRQ(19) -#define IRQ_IXDP2351_DEBUG1 IXP23XX_MACH_IRQ(20) -#define IRQ_IXDP2351_ADD_UART IXP23XX_MACH_IRQ(21) -#define IRQ_IXDP2351_FIC_ADD IXP23XX_MACH_IRQ(24) -#define IRQ_IXDP2351_CS8900 IXP23XX_MACH_IRQ(25) -#define IRQ_IXDP2351_BBSRAM IXP23XX_MACH_IRQ(26) -#define IRQ_IXDP2351_CONFIG_MEDIA IXP23XX_MACH_IRQ(27) -#define IRQ_IXDP2351_CLOCK_REF IXP23XX_MACH_IRQ(28) -#define IRQ_IXDP2351_A10_NP IXP23XX_MACH_IRQ(29) -#define IRQ_IXDP2351_A11_NP IXP23XX_MACH_IRQ(30) -#define IRQ_IXDP2351_DEBUG_NP IXP23XX_MACH_IRQ(31) - -#define IXDP2351_INTA_IRQ_BIT(irq) (irq - IXP23XX_MACH_IRQ(16)) -#define IXDP2351_INTA_IRQ_MASK(irq) (1 << IXDP2351_INTA_IRQ_BIT(irq)) -#define IXDP2351_INTA_IRQ_VALID 0xFF3F -#define IXDP2351_INTA_IRQ_NUM 16 - - -/* - * ADI RoadRunner IRQs - */ -#define IRQ_ROADRUNNER_PCI_INTA IRQ_IXP23XX_INTA -#define IRQ_ROADRUNNER_PCI_INTB IRQ_IXP23XX_INTB -#define IRQ_ROADRUNNER_PCI_INTC IRQ_IXP23XX_GPIO11 -#define IRQ_ROADRUNNER_PCI_INTD IRQ_IXP23XX_GPIO12 - -/* - * Put new board definitions here - */ - - -#endif diff --git a/arch/arm/mach-ixp23xx/include/mach/ixdp2351.h b/arch/arm/mach-ixp23xx/include/mach/ixdp2351.h deleted file mode 100644 index 663951027de..00000000000 --- a/arch/arm/mach-ixp23xx/include/mach/ixdp2351.h +++ /dev/null @@ -1,89 +0,0 @@ -/* - * arch/arm/mach-ixp23xx/include/mach/ixdp2351.h - * - * Register and other defines for IXDP2351 - * - * Copyright (c) 2002-2004 Intel Corp. - * Copytight (c) 2005 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __ASM_ARCH_IXDP2351_H -#define __ASM_ARCH_IXDP2351_H - -/* - * NP module memory map - */ -#define IXDP2351_NP_PHYS_BASE (IXP23XX_EXP_BUS_CS4_BASE) -#define IXDP2351_NP_PHYS_SIZE 0x00100000 -#define IXDP2351_NP_VIRT_BASE 0xeff00000 - -#define IXDP2351_VIRT_CS8900_BASE (IXDP2351_NP_VIRT_BASE) -#define IXDP2351_VIRT_CS8900_END (IXDP2351_VIRT_CS8900_BASE + 16) - -#define IXDP2351_VIRT_NP_CPLD_BASE (IXP23XX_EXP_BUS_CS4_BASE_VIRT + 0x00010000) - -#define IXDP2351_NP_CPLD_REG(reg) ((volatile u16 *)(IXDP2351_VIRT_NP_CPLD_BASE + reg)) - -#define IXDP2351_NP_CPLD_RESET1_REG IXDP2351_NP_CPLD_REG(0x00) -#define IXDP2351_NP_CPLD_LED_REG IXDP2351_NP_CPLD_REG(0x02) -#define IXDP2351_NP_CPLD_VERSION_REG IXDP2351_NP_CPLD_REG(0x04) - -/* - * Base board module memory map - */ - -#define IXDP2351_BB_BASE_PHYS (IXP23XX_EXP_BUS_CS5_BASE) -#define IXDP2351_BB_SIZE 0x01000000 -#define IXDP2351_BB_BASE_VIRT (0xee000000) - -#define IXDP2351_BB_AREA_BASE(offset) (IXDP2351_BB_BASE_VIRT + offset) - -#define IXDP2351_VIRT_NVRAM_BASE IXDP2351_BB_AREA_BASE(0x0) -#define IXDP2351_NVRAM_SIZE (0x20000) - -#define IXDP2351_VIRT_MB_IXF1104_BASE IXDP2351_BB_AREA_BASE(0x00020000) -#define IXDP2351_VIRT_ADD_UART_BASE IXDP2351_BB_AREA_BASE(0x000240C0) -#define IXDP2351_VIRT_FIC_BASE IXDP2351_BB_AREA_BASE(0x00200000) -#define IXDP2351_VIRT_DB0_BASE IXDP2351_BB_AREA_BASE(0x00400000) -#define IXDP2351_VIRT_DB1_BASE IXDP2351_BB_AREA_BASE(0x00600000) -#define IXDP2351_VIRT_CPLD_BASE IXDP2351_BB_AREA_BASE(0x00024000) - -/* - * On board CPLD registers - */ -#define IXDP2351_CPLD_BB_REG(reg) ((volatile u16 *)(IXDP2351_VIRT_CPLD_BASE + reg)) - -#define IXDP2351_CPLD_RESET0_REG IXDP2351_CPLD_BB_REG(0x00) -#define IXDP2351_CPLD_RESET1_REG IXDP2351_CPLD_BB_REG(0x04) - -#define IXDP2351_CPLD_RESET1_MAGIC 0x55AA -#define IXDP2351_CPLD_RESET1_ENABLE 0x8000 - -#define IXDP2351_CPLD_FPGA_CONFIG_REG IXDP2351_CPLD_BB_REG(0x08) -#define IXDP2351_CPLD_INTB_MASK_SET_REG IXDP2351_CPLD_BB_REG(0x10) -#define IXDP2351_CPLD_INTA_MASK_SET_REG IXDP2351_CPLD_BB_REG(0x14) -#define IXDP2351_CPLD_INTB_STAT_REG IXDP2351_CPLD_BB_REG(0x18) -#define IXDP2351_CPLD_INTA_STAT_REG IXDP2351_CPLD_BB_REG(0x1C) -#define IXDP2351_CPLD_INTB_RAW_REG IXDP2351_CPLD_BB_REG(0x20) /* read */ -#define IXDP2351_CPLD_INTA_RAW_REG IXDP2351_CPLD_BB_REG(0x24) /* read */ -#define IXDP2351_CPLD_INTB_MASK_CLR_REG IXDP2351_CPLD_INTB_RAW_REG /* write */ -#define IXDP2351_CPLD_INTA_MASK_CLR_REG IXDP2351_CPLD_INTA_RAW_REG /* write */ -#define IXDP2351_CPLD_INTB_SIM_REG IXDP2351_CPLD_BB_REG(0x28) -#define IXDP2351_CPLD_INTA_SIM_REG IXDP2351_CPLD_BB_REG(0x2C) - /* Interrupt bits are defined in irqs.h */ -#define IXDP2351_CPLD_BB_GBE0_REG IXDP2351_CPLD_BB_REG(0x30) -#define IXDP2351_CPLD_BB_GBE1_REG IXDP2351_CPLD_BB_REG(0x34) - -/* #define IXDP2351_CPLD_BB_MISC_REG IXDP2351_CPLD_REG(0x1C) */ -/* #define IXDP2351_CPLD_BB_MISC_REV_MASK 0xFF */ -/* #define IXDP2351_CPLD_BB_GDXCS0_REG IXDP2351_CPLD_REG(0x24) */ -/* #define IXDP2351_CPLD_BB_GDXCS1_REG IXDP2351_CPLD_REG(0x28) */ -/* #define IXDP2351_CPLD_BB_CLOCK_REG IXDP2351_CPLD_REG(0x04) */ - - -#endif diff --git a/arch/arm/mach-ixp23xx/include/mach/ixp23xx.h b/arch/arm/mach-ixp23xx/include/mach/ixp23xx.h deleted file mode 100644 index 6d02481b1d6..00000000000 --- a/arch/arm/mach-ixp23xx/include/mach/ixp23xx.h +++ /dev/null @@ -1,298 +0,0 @@ -/* - * arch/arm/mach-ixp23xx/include/mach/ixp23xx.h - * - * Register definitions for IXP23XX - * - * Copyright (C) 2003-2005 Intel Corporation. - * Copyright (C) 2005 MontaVista Software, Inc. - * - * Maintainer: Deepak Saxena <dsaxena@plexity.net> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_IXP23XX_H -#define __ASM_ARCH_IXP23XX_H - -/* - * IXP2300 linux memory map: - * - * virt phys size - * fffd0000 a0000000 64K XSI2CPP_CSR - * fffc0000 c4000000 4K EXP_CFG - * fff00000 c8000000 64K PERIPHERAL - * fe000000 1c0000000 16M CAP_CSR - * fd000000 1c8000000 16M MSF_CSR - * fb000000 16M --- - * fa000000 1d8000000 32M PCI_IO - * f8000000 1da000000 32M PCI_CFG - * f6000000 1de000000 32M PCI_CREG - * f4000000 32M --- - * f0000000 1e0000000 64M PCI_MEM - * e[c-f]000000 per-platform mappings - */ - - -/**************************************************************************** - * Static mappings. - ****************************************************************************/ -#define IXP23XX_XSI2CPP_CSR_PHYS 0xa0000000 -#define IXP23XX_XSI2CPP_CSR_VIRT 0xfffd0000 -#define IXP23XX_XSI2CPP_CSR_SIZE 0x00010000 - -#define IXP23XX_EXP_CFG_PHYS 0xc4000000 -#define IXP23XX_EXP_CFG_VIRT 0xfffc0000 -#define IXP23XX_EXP_CFG_SIZE 0x00001000 - -#define IXP23XX_PERIPHERAL_PHYS 0xc8000000 -#define IXP23XX_PERIPHERAL_VIRT 0xfff00000 -#define IXP23XX_PERIPHERAL_SIZE 0x00010000 - -#define IXP23XX_CAP_CSR_PHYS 0x1c0000000ULL -#define IXP23XX_CAP_CSR_VIRT 0xfe000000 -#define IXP23XX_CAP_CSR_SIZE 0x01000000 - -#define IXP23XX_MSF_CSR_PHYS 0x1c8000000ULL -#define IXP23XX_MSF_CSR_VIRT 0xfd000000 -#define IXP23XX_MSF_CSR_SIZE 0x01000000 - -#define IXP23XX_PCI_IO_PHYS 0x1d8000000ULL -#define IXP23XX_PCI_IO_VIRT 0xfa000000 -#define IXP23XX_PCI_IO_SIZE 0x02000000 - -#define IXP23XX_PCI_CFG_PHYS 0x1da000000ULL -#define IXP23XX_PCI_CFG_VIRT 0xf8000000 -#define IXP23XX_PCI_CFG_SIZE 0x02000000 -#define IXP23XX_PCI_CFG0_VIRT IXP23XX_PCI_CFG_VIRT -#define IXP23XX_PCI_CFG1_VIRT (IXP23XX_PCI_CFG_VIRT + 0x01000000) - -#define IXP23XX_PCI_CREG_PHYS 0x1de000000ULL -#define IXP23XX_PCI_CREG_VIRT 0xf6000000 -#define IXP23XX_PCI_CREG_SIZE 0x02000000 -#define IXP23XX_PCI_CSR_VIRT (IXP23XX_PCI_CREG_VIRT + 0x01000000) - -#define IXP23XX_PCI_MEM_START 0xe0000000 -#define IXP23XX_PCI_MEM_PHYS 0x1e0000000ULL -#define IXP23XX_PCI_MEM_VIRT 0xf0000000 -#define IXP23XX_PCI_MEM_SIZE 0x04000000 - - -/**************************************************************************** - * XSI2CPP CSRs. - ****************************************************************************/ -#define IXP23XX_XSI2CPP_REG(x) ((volatile unsigned long *)(IXP23XX_XSI2CPP_CSR_VIRT + (x))) -#define IXP23XX_CPP2XSI_CURR_XFER_REG3 IXP23XX_XSI2CPP_REG(0xf8) -#define IXP23XX_CPP2XSI_ADDR_31 (1 << 19) -#define IXP23XX_CPP2XSI_PSH_OFF (1 << 20) -#define IXP23XX_CPP2XSI_COH_OFF (1 << 21) - - -/**************************************************************************** - * Expansion Bus Config. - ****************************************************************************/ -#define IXP23XX_EXP_CFG_REG(x) ((volatile unsigned long *)(IXP23XX_EXP_CFG_VIRT + (x))) -#define IXP23XX_EXP_CS0 IXP23XX_EXP_CFG_REG(0x00) -#define IXP23XX_EXP_CS1 IXP23XX_EXP_CFG_REG(0x04) -#define IXP23XX_EXP_CS2 IXP23XX_EXP_CFG_REG(0x08) -#define IXP23XX_EXP_CS3 IXP23XX_EXP_CFG_REG(0x0c) -#define IXP23XX_EXP_CS4 IXP23XX_EXP_CFG_REG(0x10) -#define IXP23XX_EXP_CS5 IXP23XX_EXP_CFG_REG(0x14) -#define IXP23XX_EXP_CS6 IXP23XX_EXP_CFG_REG(0x18) -#define IXP23XX_EXP_CS7 IXP23XX_EXP_CFG_REG(0x1c) -#define IXP23XX_FLASH_WRITABLE (0x2) -#define IXP23XX_FLASH_BUS8 (0x1) - -#define IXP23XX_EXP_CFG0 IXP23XX_EXP_CFG_REG(0x20) -#define IXP23XX_EXP_CFG1 IXP23XX_EXP_CFG_REG(0x24) -#define IXP23XX_EXP_CFG0_MEM_MAP (1 << 31) -#define IXP23XX_EXP_CFG0_XSCALE_SPEED_SEL (3 << 22) -#define IXP23XX_EXP_CFG0_XSCALE_SPEED_EN (1 << 21) -#define IXP23XX_EXP_CFG0_CPP_SPEED_SEL (3 << 19) -#define IXP23XX_EXP_CFG0_CPP_SPEED_EN (1 << 18) -#define IXP23XX_EXP_CFG0_PCI_SWIN (3 << 16) -#define IXP23XX_EXP_CFG0_PCI_DWIN (3 << 14) -#define IXP23XX_EXP_CFG0_PCI33_MODE (1 << 13) -#define IXP23XX_EXP_CFG0_QDR_SPEED_SEL (1 << 12) -#define IXP23XX_EXP_CFG0_CPP_DIV_SEL (1 << 5) -#define IXP23XX_EXP_CFG0_XSI_NOT_PRES (1 << 4) -#define IXP23XX_EXP_CFG0_PROM_BOOT (1 << 3) -#define IXP23XX_EXP_CFG0_PCI_ARB (1 << 2) -#define IXP23XX_EXP_CFG0_PCI_HOST (1 << 1) -#define IXP23XX_EXP_CFG0_FLASH_WIDTH (1 << 0) - -#define IXP23XX_EXP_UNIT_FUSE IXP23XX_EXP_CFG_REG(0x28) -#define IXP23XX_EXP_MSF_MUX IXP23XX_EXP_CFG_REG(0x30) -#define IXP23XX_EXP_CFG_FUSE IXP23XX_EXP_CFG_REG(0x34) - -#define IXP23XX_EXP_BUS_PHYS 0x90000000 -#define IXP23XX_EXP_BUS_WINDOW_SIZE 0x01000000 - -#define IXP23XX_EXP_BUS_CS0_BASE (IXP23XX_EXP_BUS_PHYS + 0x00000000) -#define IXP23XX_EXP_BUS_CS1_BASE (IXP23XX_EXP_BUS_PHYS + 0x01000000) -#define IXP23XX_EXP_BUS_CS2_BASE (IXP23XX_EXP_BUS_PHYS + 0x02000000) -#define IXP23XX_EXP_BUS_CS3_BASE (IXP23XX_EXP_BUS_PHYS + 0x03000000) -#define IXP23XX_EXP_BUS_CS4_BASE (IXP23XX_EXP_BUS_PHYS + 0x04000000) -#define IXP23XX_EXP_BUS_CS5_BASE (IXP23XX_EXP_BUS_PHYS + 0x05000000) -#define IXP23XX_EXP_BUS_CS6_BASE (IXP23XX_EXP_BUS_PHYS + 0x06000000) -#define IXP23XX_EXP_BUS_CS7_BASE (IXP23XX_EXP_BUS_PHYS + 0x07000000) - - -/**************************************************************************** - * Peripherals. - ****************************************************************************/ -#define IXP23XX_UART1_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x0000) -#define IXP23XX_UART2_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x1000) -#define IXP23XX_PMU_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x2000) -#define IXP23XX_INTC_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x3000) -#define IXP23XX_GPIO_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x4000) -#define IXP23XX_TIMER_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x5000) -#define IXP23XX_NPE0_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x6000) -#define IXP23XX_DSR_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x7000) -#define IXP23XX_NPE1_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x8000) -#define IXP23XX_ETH0_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x9000) -#define IXP23XX_ETH1_VIRT (IXP23XX_PERIPHERAL_VIRT + 0xA000) -#define IXP23XX_GIG0_VIRT (IXP23XX_PERIPHERAL_VIRT + 0xB000) -#define IXP23XX_GIG1_VIRT (IXP23XX_PERIPHERAL_VIRT + 0xC000) -#define IXP23XX_DDRS_VIRT (IXP23XX_PERIPHERAL_VIRT + 0xD000) - -#define IXP23XX_UART1_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x0000) -#define IXP23XX_UART2_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x1000) -#define IXP23XX_PMU_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x2000) -#define IXP23XX_INTC_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x3000) -#define IXP23XX_GPIO_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x4000) -#define IXP23XX_TIMER_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x5000) -#define IXP23XX_NPE0_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x6000) -#define IXP23XX_DSR_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x7000) -#define IXP23XX_NPE1_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x8000) -#define IXP23XX_ETH0_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x9000) -#define IXP23XX_ETH1_PHYS (IXP23XX_PERIPHERAL_PHYS + 0xA000) -#define IXP23XX_GIG0_PHYS (IXP23XX_PERIPHERAL_PHYS + 0xB000) -#define IXP23XX_GIG1_PHYS (IXP23XX_PERIPHERAL_PHYS + 0xC000) -#define IXP23XX_DDRS_PHYS (IXP23XX_PERIPHERAL_PHYS + 0xD000) - - -/**************************************************************************** - * Interrupt controller. - ****************************************************************************/ -#define IXP23XX_INTC_REG(x) ((volatile unsigned long *)(IXP23XX_INTC_VIRT + (x))) -#define IXP23XX_INTR_ST1 IXP23XX_INTC_REG(0x00) -#define IXP23XX_INTR_ST2 IXP23XX_INTC_REG(0x04) -#define IXP23XX_INTR_ST3 IXP23XX_INTC_REG(0x08) -#define IXP23XX_INTR_ST4 IXP23XX_INTC_REG(0x0c) -#define IXP23XX_INTR_EN1 IXP23XX_INTC_REG(0x10) -#define IXP23XX_INTR_EN2 IXP23XX_INTC_REG(0x14) -#define IXP23XX_INTR_EN3 IXP23XX_INTC_REG(0x18) -#define IXP23XX_INTR_EN4 IXP23XX_INTC_REG(0x1c) -#define IXP23XX_INTR_SEL1 IXP23XX_INTC_REG(0x20) -#define IXP23XX_INTR_SEL2 IXP23XX_INTC_REG(0x24) -#define IXP23XX_INTR_SEL3 IXP23XX_INTC_REG(0x28) -#define IXP23XX_INTR_SEL4 IXP23XX_INTC_REG(0x2c) -#define IXP23XX_INTR_IRQ_ST1 IXP23XX_INTC_REG(0x30) -#define IXP23XX_INTR_IRQ_ST2 IXP23XX_INTC_REG(0x34) -#define IXP23XX_INTR_IRQ_ST3 IXP23XX_INTC_REG(0x38) -#define IXP23XX_INTR_IRQ_ST4 IXP23XX_INTC_REG(0x3c) -#define IXP23XX_INTR_IRQ_ENC_ST_OFFSET 0x54 - - -/**************************************************************************** - * GPIO. - ****************************************************************************/ -#define IXP23XX_GPIO_REG(x) ((volatile unsigned long *)(IXP23XX_GPIO_VIRT + (x))) -#define IXP23XX_GPIO_GPOUTR IXP23XX_GPIO_REG(0x00) -#define IXP23XX_GPIO_GPOER IXP23XX_GPIO_REG(0x04) -#define IXP23XX_GPIO_GPINR IXP23XX_GPIO_REG(0x08) -#define IXP23XX_GPIO_GPISR IXP23XX_GPIO_REG(0x0c) -#define IXP23XX_GPIO_GPIT1R IXP23XX_GPIO_REG(0x10) -#define IXP23XX_GPIO_GPIT2R IXP23XX_GPIO_REG(0x14) -#define IXP23XX_GPIO_GPCLKR IXP23XX_GPIO_REG(0x18) -#define IXP23XX_GPIO_GPDBSELR IXP23XX_GPIO_REG(0x1c) - -#define IXP23XX_GPIO_STYLE_MASK 0x7 -#define IXP23XX_GPIO_STYLE_ACTIVE_HIGH 0x0 -#define IXP23XX_GPIO_STYLE_ACTIVE_LOW 0x1 -#define IXP23XX_GPIO_STYLE_RISING_EDGE 0x2 -#define IXP23XX_GPIO_STYLE_FALLING_EDGE 0x3 -#define IXP23XX_GPIO_STYLE_TRANSITIONAL 0x4 - -#define IXP23XX_GPIO_STYLE_SIZE 3 - - -/**************************************************************************** - * Timer. - ****************************************************************************/ -#define IXP23XX_TIMER_REG(x) ((volatile unsigned long *)(IXP23XX_TIMER_VIRT + (x))) -#define IXP23XX_TIMER_CONT IXP23XX_TIMER_REG(0x00) -#define IXP23XX_TIMER1_TIMESTAMP IXP23XX_TIMER_REG(0x04) -#define IXP23XX_TIMER1_RELOAD IXP23XX_TIMER_REG(0x08) -#define IXP23XX_TIMER2_TIMESTAMP IXP23XX_TIMER_REG(0x0c) -#define IXP23XX_TIMER2_RELOAD IXP23XX_TIMER_REG(0x10) -#define IXP23XX_TIMER_WDOG IXP23XX_TIMER_REG(0x14) -#define IXP23XX_TIMER_WDOG_EN IXP23XX_TIMER_REG(0x18) -#define IXP23XX_TIMER_WDOG_KEY IXP23XX_TIMER_REG(0x1c) -#define IXP23XX_TIMER_WDOG_KEY_MAGIC 0x482e -#define IXP23XX_TIMER_STATUS IXP23XX_TIMER_REG(0x20) -#define IXP23XX_TIMER_SOFT_RESET IXP23XX_TIMER_REG(0x24) -#define IXP23XX_TIMER_SOFT_RESET_EN IXP23XX_TIMER_REG(0x28) - -#define IXP23XX_TIMER_ENABLE (1 << 0) -#define IXP23XX_TIMER_ONE_SHOT (1 << 1) -/* Low order bits of reload value ignored */ -#define IXP23XX_TIMER_RELOAD_MASK (0x3) -#define IXP23XX_TIMER_DISABLED (0x0) -#define IXP23XX_TIMER1_INT_PEND (1 << 0) -#define IXP23XX_TIMER2_INT_PEND (1 << 1) -#define IXP23XX_TIMER_STATUS_TS_PEND (1 << 2) -#define IXP23XX_TIMER_STATUS_WDOG_PEND (1 << 3) -#define IXP23XX_TIMER_STATUS_WARM_RESET (1 << 4) - - -/**************************************************************************** - * CAP CSRs. - ****************************************************************************/ -#define IXP23XX_GLOBAL_REG(x) ((volatile unsigned long *)(IXP23XX_CAP_CSR_VIRT + 0x4a00 + (x))) -#define IXP23XX_PRODUCT_ID IXP23XX_GLOBAL_REG(0x00) -#define IXP23XX_MISC_CONTROL IXP23XX_GLOBAL_REG(0x04) -#define IXP23XX_MSF_CLK_CNTRL IXP23XX_GLOBAL_REG(0x08) -#define IXP23XX_RESET0 IXP23XX_GLOBAL_REG(0x0c) -#define IXP23XX_RESET1 IXP23XX_GLOBAL_REG(0x10) -#define IXP23XX_STRAP_OPTIONS IXP23XX_GLOBAL_REG(0x18) - -#define IXP23XX_ENABLE_WATCHDOG (1 << 24) -#define IXP23XX_SHPC_INIT_COMP (1 << 21) -#define IXP23XX_RST_ALL (1 << 16) -#define IXP23XX_RESET_PCI (1 << 2) -#define IXP23XX_PCI_UNIT_RESET (1 << 1) -#define IXP23XX_XSCALE_RESET (1 << 0) - -#define IXP23XX_UENGINE_CSR_VIRT_BASE (IXP23XX_CAP_CSR_VIRT + 0x18000) - - -/**************************************************************************** - * PCI CSRs. - ****************************************************************************/ -#define IXP23XX_PCI_CREG(x) ((volatile unsigned long *)(IXP23XX_PCI_CREG_VIRT + (x))) -#define IXP23XX_PCI_CMDSTAT IXP23XX_PCI_CREG(0x04) -#define IXP23XX_PCI_SRAM_BAR IXP23XX_PCI_CREG(0x14) -#define IXP23XX_PCI_SDRAM_BAR IXP23XX_PCI_CREG(0x18) - - -#define IXP23XX_PCI_CSR(x) ((volatile unsigned long *)(IXP23XX_PCI_CREG_VIRT + 0x01000000 + (x))) -#define IXP23XX_PCI_OUT_INT_STATUS IXP23XX_PCI_CSR(0x0030) -#define IXP23XX_PCI_OUT_INT_MASK IXP23XX_PCI_CSR(0x0034) -#define IXP23XX_PCI_SRAM_BASE_ADDR_MASK IXP23XX_PCI_CSR(0x00fc) -#define IXP23XX_PCI_DRAM_BASE_ADDR_MASK IXP23XX_PCI_CSR(0x0100) -#define IXP23XX_PCI_CONTROL IXP23XX_PCI_CSR(0x013c) -#define IXP23XX_PCI_ADDR_EXT IXP23XX_PCI_CSR(0x0140) -#define IXP23XX_PCI_ME_PUSH_STATUS IXP23XX_PCI_CSR(0x0148) -#define IXP23XX_PCI_ME_PUSH_EN IXP23XX_PCI_CSR(0x014c) -#define IXP23XX_PCI_ERR_STATUS IXP23XX_PCI_CSR(0x0150) -#define IXP23XX_PCI_ERROR_STATUS IXP23XX_PCI_CSR(0x0150) -#define IXP23XX_PCI_ERR_ENABLE IXP23XX_PCI_CSR(0x0154) -#define IXP23XX_PCI_XSCALE_INT_STATUS IXP23XX_PCI_CSR(0x0158) -#define IXP23XX_PCI_XSCALE_INT_ENABLE IXP23XX_PCI_CSR(0x015c) -#define IXP23XX_PCI_CPP_ADDR_BITS IXP23XX_PCI_CSR(0x0160) - - -#endif diff --git a/arch/arm/mach-ixp23xx/include/mach/memory.h b/arch/arm/mach-ixp23xx/include/mach/memory.h deleted file mode 100644 index 6cf0704e946..00000000000 --- a/arch/arm/mach-ixp23xx/include/mach/memory.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * arch/arm/mach-ixp23xx/include/mach/memory.h - * - * Copyright (c) 2003-2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#include <mach/hardware.h> - -/* - * Physical DRAM offset. - */ -#define PLAT_PHYS_OFFSET (0x00000000) - -#define IXP23XX_PCI_SDRAM_OFFSET (*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0) - -#define __phys_to_bus(x) ((x) + (IXP23XX_PCI_SDRAM_OFFSET - PHYS_OFFSET)) -#define __bus_to_phys(x) ((x) - (IXP23XX_PCI_SDRAM_OFFSET - PHYS_OFFSET)) - -#define __virt_to_bus(v) __phys_to_bus(__virt_to_phys(v)) -#define __bus_to_virt(b) __phys_to_virt(__bus_to_phys(b)) -#define __pfn_to_bus(p) __phys_to_bus(__pfn_to_phys(p)) -#define __bus_to_pfn(b) __phys_to_pfn(__bus_to_phys(b)) - -#define arch_is_coherent() 1 - -#endif diff --git a/arch/arm/mach-ixp23xx/include/mach/platform.h b/arch/arm/mach-ixp23xx/include/mach/platform.h deleted file mode 100644 index 50de558e722..00000000000 --- a/arch/arm/mach-ixp23xx/include/mach/platform.h +++ /dev/null @@ -1,58 +0,0 @@ -/* - * arch/arm/mach-ixp23xx/include/mach/platform.h - * - * Various bits of code used by platform-level code. - * - * Author: Deepak Saxena <dsaxena@plexity.net> - * - * Copyright 2005 (c) MontaVista Software, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASSEMBLY__ - -static inline unsigned long ixp2000_reg_read(volatile void *reg) -{ - return *((volatile unsigned long *)reg); -} - -static inline void ixp2000_reg_write(volatile void *reg, unsigned long val) -{ - *((volatile unsigned long *)reg) = val; -} - -static inline void ixp2000_reg_wrb(volatile void *reg, unsigned long val) -{ - *((volatile unsigned long *)reg) = val; -} - -struct pci_sys_data; - -void ixp23xx_map_io(void); -void ixp23xx_init_irq(void); -void ixp23xx_sys_init(void); -void ixp23xx_restart(char, const char *); -int ixp23xx_pci_setup(int, struct pci_sys_data *); -void ixp23xx_pci_preinit(void); -struct pci_bus *ixp23xx_pci_scan_bus(int, struct pci_sys_data*); -void ixp23xx_pci_slave_init(void); - -extern struct sys_timer ixp23xx_timer; - -#define IXP23XX_UART_XTAL 14745600 - -#ifndef __ASSEMBLY__ -/* - * Is system memory on the XSI or CPP bus? - */ -static inline unsigned ixp23xx_cpp_boot(void) -{ - return (*IXP23XX_EXP_CFG0 & IXP23XX_EXP_CFG0_XSI_NOT_PRES); -} -#endif - - -#endif diff --git a/arch/arm/mach-ixp23xx/include/mach/time.h b/arch/arm/mach-ixp23xx/include/mach/time.h deleted file mode 100644 index b61dafc884a..00000000000 --- a/arch/arm/mach-ixp23xx/include/mach/time.h +++ /dev/null @@ -1,3 +0,0 @@ -/* - * arch/arm/mach-ixp23xx/include/mach/time.h - */ diff --git a/arch/arm/mach-ixp23xx/include/mach/timex.h b/arch/arm/mach-ixp23xx/include/mach/timex.h deleted file mode 100644 index e341e9cf9c3..00000000000 --- a/arch/arm/mach-ixp23xx/include/mach/timex.h +++ /dev/null @@ -1,7 +0,0 @@ -/* - * arch/arm/mach-ixp23xx/include/mach/timex.h - * - * XScale architecture timex specifications - */ - -#define CLOCK_TICK_RATE 75000000 diff --git a/arch/arm/mach-ixp23xx/include/mach/uncompress.h b/arch/arm/mach-ixp23xx/include/mach/uncompress.h deleted file mode 100644 index 8b4c358d2c0..00000000000 --- a/arch/arm/mach-ixp23xx/include/mach/uncompress.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * arch/arm/mach-ixp23xx/include/mach/uncompress.h - * - * Copyright (C) 2002-2004 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H - -#include <mach/ixp23xx.h> -#include <linux/serial_reg.h> - -#define UART_BASE ((volatile u32 *)IXP23XX_UART1_PHYS) - -static inline void putc(char c) -{ - int j; - - for (j = 0; j < 0x1000; j++) { - if (UART_BASE[UART_LSR] & UART_LSR_THRE) - break; - barrier(); - } - - UART_BASE[UART_TX] = c; -} - -static inline void flush(void) -{ -} - -#define arch_decomp_setup() -#define arch_decomp_wdog() - - -#endif diff --git a/arch/arm/mach-ixp23xx/ixdp2351.c b/arch/arm/mach-ixp23xx/ixdp2351.c deleted file mode 100644 index b0e07db5cea..00000000000 --- a/arch/arm/mach-ixp23xx/ixdp2351.c +++ /dev/null @@ -1,347 +0,0 @@ -/* - * arch/arm/mach-ixp23xx/ixdp2351.c - * - * IXDP2351 board-specific routines - * - * Author: Deepak Saxena <dsaxena@plexity.net> - * - * Copyright 2005 (c) MontaVista Software, Inc. - * - * Based on 2.4 code Copyright 2004 (c) Intel Corporation - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/spinlock.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/serial.h> -#include <linux/tty.h> -#include <linux/bitops.h> -#include <linux/ioport.h> -#include <linux/serial_8250.h> -#include <linux/serial_core.h> -#include <linux/device.h> -#include <linux/mm.h> -#include <linux/pci.h> -#include <linux/mtd/physmap.h> - -#include <asm/types.h> -#include <asm/setup.h> -#include <asm/memory.h> -#include <mach/hardware.h> -#include <asm/mach-types.h> -#include <asm/tlbflush.h> -#include <asm/pgtable.h> - -#include <asm/mach/map.h> -#include <asm/mach/irq.h> -#include <asm/mach/arch.h> -#include <asm/mach/pci.h> - -/* - * IXDP2351 Interrupt Handling - */ -static void ixdp2351_inta_mask(struct irq_data *d) -{ - *IXDP2351_CPLD_INTA_MASK_SET_REG = IXDP2351_INTA_IRQ_MASK(d->irq); -} - -static void ixdp2351_inta_unmask(struct irq_data *d) -{ - *IXDP2351_CPLD_INTA_MASK_CLR_REG = IXDP2351_INTA_IRQ_MASK(d->irq); -} - -static void ixdp2351_inta_handler(unsigned int irq, struct irq_desc *desc) -{ - u16 ex_interrupt = - *IXDP2351_CPLD_INTA_STAT_REG & IXDP2351_INTA_IRQ_VALID; - int i; - - desc->irq_data.chip->irq_mask(&desc->irq_data); - - for (i = 0; i < IXDP2351_INTA_IRQ_NUM; i++) { - if (ex_interrupt & (1 << i)) { - int cpld_irq = - IXP23XX_MACH_IRQ(IXDP2351_INTA_IRQ_BASE + i); - generic_handle_irq(cpld_irq); - } - } - - desc->irq_data.chip->irq_unmask(&desc->irq_data); -} - -static struct irq_chip ixdp2351_inta_chip = { - .irq_ack = ixdp2351_inta_mask, - .irq_mask = ixdp2351_inta_mask, - .irq_unmask = ixdp2351_inta_unmask -}; - -static void ixdp2351_intb_mask(struct irq_data *d) -{ - *IXDP2351_CPLD_INTB_MASK_SET_REG = IXDP2351_INTB_IRQ_MASK(d->irq); -} - -static void ixdp2351_intb_unmask(struct irq_data *d) -{ - *IXDP2351_CPLD_INTB_MASK_CLR_REG = IXDP2351_INTB_IRQ_MASK(d->irq); -} - -static void ixdp2351_intb_handler(unsigned int irq, struct irq_desc *desc) -{ - u16 ex_interrupt = - *IXDP2351_CPLD_INTB_STAT_REG & IXDP2351_INTB_IRQ_VALID; - int i; - - desc->irq_data.chip->irq_ack(&desc->irq_data); - - for (i = 0; i < IXDP2351_INTB_IRQ_NUM; i++) { - if (ex_interrupt & (1 << i)) { - int cpld_irq = - IXP23XX_MACH_IRQ(IXDP2351_INTB_IRQ_BASE + i); - generic_handle_irq(cpld_irq); - } - } - - desc->irq_data.chip->irq_unmask(&desc->irq_data); -} - -static struct irq_chip ixdp2351_intb_chip = { - .irq_ack = ixdp2351_intb_mask, - .irq_mask = ixdp2351_intb_mask, - .irq_unmask = ixdp2351_intb_unmask -}; - -void __init ixdp2351_init_irq(void) -{ - int irq; - - /* Mask all interrupts from CPLD, disable simulation */ - *IXDP2351_CPLD_INTA_MASK_SET_REG = (u16) -1; - *IXDP2351_CPLD_INTB_MASK_SET_REG = (u16) -1; - *IXDP2351_CPLD_INTA_SIM_REG = 0; - *IXDP2351_CPLD_INTB_SIM_REG = 0; - - ixp23xx_init_irq(); - - for (irq = IXP23XX_MACH_IRQ(IXDP2351_INTA_IRQ_BASE); - irq < - IXP23XX_MACH_IRQ(IXDP2351_INTA_IRQ_BASE + IXDP2351_INTA_IRQ_NUM); - irq++) { - if (IXDP2351_INTA_IRQ_MASK(irq) & IXDP2351_INTA_IRQ_VALID) { - set_irq_flags(irq, IRQF_VALID); - irq_set_chip_and_handler(irq, &ixdp2351_inta_chip, - handle_level_irq); - } - } - - for (irq = IXP23XX_MACH_IRQ(IXDP2351_INTB_IRQ_BASE); - irq < - IXP23XX_MACH_IRQ(IXDP2351_INTB_IRQ_BASE + IXDP2351_INTB_IRQ_NUM); - irq++) { - if (IXDP2351_INTB_IRQ_MASK(irq) & IXDP2351_INTB_IRQ_VALID) { - set_irq_flags(irq, IRQF_VALID); - irq_set_chip_and_handler(irq, &ixdp2351_intb_chip, - handle_level_irq); - } - } - - irq_set_chained_handler(IRQ_IXP23XX_INTA, ixdp2351_inta_handler); - irq_set_chained_handler(IRQ_IXP23XX_INTB, ixdp2351_intb_handler); -} - -/* - * IXDP2351 PCI - */ - -/* - * This board does not do normal PCI IRQ routing, or any - * sort of swizzling, so we just need to check where on the - * bus the device is and figure out what CPLD pin it is - * being routed to. - */ -#define DEVPIN(dev, pin) ((pin) | ((dev) << 3)) - -static int __init ixdp2351_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - u8 bus = dev->bus->number; - u32 devpin = DEVPIN(PCI_SLOT(dev->devfn), pin); - struct pci_bus *tmp_bus = dev->bus; - - /* Primary bus, no interrupts here */ - if (!bus) - return -1; - - /* Lookup first leaf in bus tree */ - while ((tmp_bus->parent != NULL) && (tmp_bus->parent->parent != NULL)) - tmp_bus = tmp_bus->parent; - - /* Select between known bridges */ - switch (tmp_bus->self->devfn | (tmp_bus->self->bus->number << 8)) { - /* Device is located after first bridge */ - case 0x0008: - if (tmp_bus == dev->bus) { - /* Device is located directy after first bridge */ - switch (devpin) { - /* Onboard 82546 */ - case DEVPIN(1, 1): /* Onboard 82546 ch 0 */ - return IRQ_IXDP2351_INTA_82546; - case DEVPIN(1, 2): /* Onboard 82546 ch 1 */ - return IRQ_IXDP2351_INTB_82546; - /* PMC SLOT */ - case DEVPIN(0, 1): /* PMCP INTA# */ - case DEVPIN(2, 4): /* PMCS INTD# */ - return IRQ_IXDP2351_SPCI_PMC_INTA; - case DEVPIN(0, 2): /* PMCP INTB# */ - case DEVPIN(2, 1): /* PMCS INTA# */ - return IRQ_IXDP2351_SPCI_PMC_INTB; - case DEVPIN(0, 3): /* PMCP INTC# */ - case DEVPIN(2, 2): /* PMCS INTB# */ - return IRQ_IXDP2351_SPCI_PMC_INTC; - case DEVPIN(0, 4): /* PMCP INTD# */ - case DEVPIN(2, 3): /* PMCS INTC# */ - return IRQ_IXDP2351_SPCI_PMC_INTD; - } - } else { - /* Device is located indirectly after first bridge */ - /* Not supported now */ - return -1; - } - break; - case 0x0010: - if (tmp_bus == dev->bus) { - /* Device is located directy after second bridge */ - /* Secondary bus of second bridge */ - switch (devpin) { - case DEVPIN(0, 1): /* DB#0 */ - case DEVPIN(0, 2): - case DEVPIN(0, 3): - case DEVPIN(0, 4): - return IRQ_IXDP2351_SPCI_DB_0; - case DEVPIN(1, 1): /* DB#1 */ - case DEVPIN(1, 2): - case DEVPIN(1, 3): - case DEVPIN(1, 4): - return IRQ_IXDP2351_SPCI_DB_1; - case DEVPIN(2, 1): /* FIC1 */ - case DEVPIN(2, 2): - case DEVPIN(2, 3): - case DEVPIN(2, 4): - case DEVPIN(3, 1): /* FIC2 */ - case DEVPIN(3, 2): - case DEVPIN(3, 3): - case DEVPIN(3, 4): - return IRQ_IXDP2351_SPCI_FIC; - } - } else { - /* Device is located indirectly after second bridge */ - /* Not supported now */ - return -1; - } - break; - } - - return -1; -} - -struct hw_pci ixdp2351_pci __initdata = { - .nr_controllers = 1, - .preinit = ixp23xx_pci_preinit, - .setup = ixp23xx_pci_setup, - .scan = ixp23xx_pci_scan_bus, - .map_irq = ixdp2351_map_irq, -}; - -int __init ixdp2351_pci_init(void) -{ - if (machine_is_ixdp2351()) - pci_common_init(&ixdp2351_pci); - - return 0; -} - -subsys_initcall(ixdp2351_pci_init); - -/* - * IXDP2351 Static Mapped I/O - */ -static struct map_desc ixdp2351_io_desc[] __initdata = { - { - .virtual = IXDP2351_NP_VIRT_BASE, - .pfn = __phys_to_pfn((u64)IXDP2351_NP_PHYS_BASE), - .length = IXDP2351_NP_PHYS_SIZE, - .type = MT_DEVICE - }, { - .virtual = IXDP2351_BB_BASE_VIRT, - .pfn = __phys_to_pfn((u64)IXDP2351_BB_BASE_PHYS), - .length = IXDP2351_BB_SIZE, - .type = MT_DEVICE - } -}; - -static void __init ixdp2351_map_io(void) -{ - ixp23xx_map_io(); - iotable_init(ixdp2351_io_desc, ARRAY_SIZE(ixdp2351_io_desc)); -} - -static struct physmap_flash_data ixdp2351_flash_data = { - .width = 1, -}; - -static struct resource ixdp2351_flash_resource = { - .start = 0x90000000, - .end = 0x93ffffff, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device ixdp2351_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &ixdp2351_flash_data, - }, - .num_resources = 1, - .resource = &ixdp2351_flash_resource, -}; - -static void __init ixdp2351_init(void) -{ - platform_device_register(&ixdp2351_flash); - - /* - * Mark flash as writeable - */ - IXP23XX_EXP_CS0[0] |= IXP23XX_FLASH_WRITABLE; - IXP23XX_EXP_CS0[1] |= IXP23XX_FLASH_WRITABLE; - IXP23XX_EXP_CS0[2] |= IXP23XX_FLASH_WRITABLE; - IXP23XX_EXP_CS0[3] |= IXP23XX_FLASH_WRITABLE; - - ixp23xx_sys_init(); -} - -static void ixdp2351_restart(char mode, const char *cmd) -{ - /* First try machine specific support */ - - *IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_MAGIC; - (void) *IXDP2351_CPLD_RESET1_REG; - *IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_ENABLE; - - ixp23xx_restart(mode, cmd); -} - -MACHINE_START(IXDP2351, "Intel IXDP2351 Development Platform") - /* Maintainer: MontaVista Software, Inc. */ - .map_io = ixdp2351_map_io, - .init_irq = ixdp2351_init_irq, - .timer = &ixp23xx_timer, - .atag_offset = 0x100, - .init_machine = ixdp2351_init, - .restart = ixdp2351_restart, -MACHINE_END diff --git a/arch/arm/mach-ixp23xx/pci.c b/arch/arm/mach-ixp23xx/pci.c deleted file mode 100644 index 911f5a58e00..00000000000 --- a/arch/arm/mach-ixp23xx/pci.c +++ /dev/null @@ -1,294 +0,0 @@ -/* - * arch/arm/mach-ixp23xx/pci.c - * - * PCI routines for IXP23XX based systems - * - * Copyright (c) 2005 MontaVista Software, Inc. - * - * based on original code: - * - * Author: Naeem Afzal <naeem.m.afzal@intel.com> - * Copyright 2002-2005 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/interrupt.h> -#include <linux/mm.h> -#include <linux/init.h> -#include <linux/ioport.h> -#include <linux/delay.h> -#include <linux/io.h> - -#include <asm/irq.h> -#include <asm/sizes.h> -#include <asm/mach/pci.h> -#include <mach/hardware.h> - -extern int (*external_fault) (unsigned long, struct pt_regs *); - -static volatile int pci_master_aborts = 0; - -#ifdef DEBUG -#define DBG(x...) printk(x) -#else -#define DBG(x...) -#endif - -int clear_master_aborts(void); - -static u32 -*ixp23xx_pci_config_addr(unsigned int bus_nr, unsigned int devfn, int where) -{ - u32 *paddress; - - /* - * Must be dword aligned - */ - where &= ~3; - - /* - * For top bus, generate type 0, else type 1 - */ - if (!bus_nr) { - if (PCI_SLOT(devfn) >= 8) - return 0; - - paddress = (u32 *) (IXP23XX_PCI_CFG0_VIRT - | (1 << (PCI_SLOT(devfn) + 16)) - | (PCI_FUNC(devfn) << 8) | where); - } else { - paddress = (u32 *) (IXP23XX_PCI_CFG1_VIRT - | (bus_nr << 16) - | (PCI_SLOT(devfn) << 11) - | (PCI_FUNC(devfn) << 8) | where); - } - - return paddress; -} - -/* - * Mask table, bits to mask for quantity of size 1, 2 or 4 bytes. - * 0 and 3 are not valid indexes... - */ -static u32 bytemask[] = { - /*0*/ 0, - /*1*/ 0xff, - /*2*/ 0xffff, - /*3*/ 0, - /*4*/ 0xffffffff, -}; - -static int ixp23xx_pci_read_config(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 *value) -{ - u32 n; - u32 *addr; - - n = where % 4; - - DBG("In config_read(%d) %d from dev %d:%d:%d\n", size, where, - bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn)); - - addr = ixp23xx_pci_config_addr(bus->number, devfn, where); - if (!addr) - return PCIBIOS_DEVICE_NOT_FOUND; - - pci_master_aborts = 0; - *value = (*addr >> (8*n)) & bytemask[size]; - if (pci_master_aborts) { - pci_master_aborts = 0; - *value = 0xffffffff; - return PCIBIOS_DEVICE_NOT_FOUND; - } - - return PCIBIOS_SUCCESSFUL; -} - -/* - * We don't do error checking on the address for writes. - * It's assumed that the user checked for the device existing first - * by doing a read first. - */ -static int ixp23xx_pci_write_config(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 value) -{ - u32 mask; - u32 *addr; - u32 temp; - - mask = ~(bytemask[size] << ((where % 0x4) * 8)); - addr = ixp23xx_pci_config_addr(bus->number, devfn, where); - if (!addr) - return PCIBIOS_DEVICE_NOT_FOUND; - temp = (u32) (value) << ((where % 0x4) * 8); - *addr = (*addr & mask) | temp; - - clear_master_aborts(); - - return PCIBIOS_SUCCESSFUL; -} - -struct pci_ops ixp23xx_pci_ops = { - .read = ixp23xx_pci_read_config, - .write = ixp23xx_pci_write_config, -}; - -struct pci_bus *ixp23xx_pci_scan_bus(int nr, struct pci_sys_data *sysdata) -{ - return pci_scan_root_bus(NULL, sysdata->busnr, &ixp23xx_pci_ops, - sysdata, &sysdata->resources); -} - -int ixp23xx_pci_abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *regs) -{ - volatile unsigned long temp; - unsigned long flags; - - pci_master_aborts = 1; - - local_irq_save(flags); - temp = *IXP23XX_PCI_CONTROL; - - /* - * master abort and cmd tgt err - */ - if (temp & ((1 << 8) | (1 << 5))) - *IXP23XX_PCI_CONTROL = temp; - - temp = *IXP23XX_PCI_CMDSTAT; - - if (temp & (1 << 29)) - *IXP23XX_PCI_CMDSTAT = temp; - local_irq_restore(flags); - - /* - * If it was an imprecise abort, then we need to correct the - * return address to be _after_ the instruction. - */ - if (fsr & (1 << 10)) - regs->ARM_pc += 4; - - return 0; -} - -int clear_master_aborts(void) -{ - volatile u32 temp; - - temp = *IXP23XX_PCI_CONTROL; - - /* - * master abort and cmd tgt err - */ - if (temp & ((1 << 8) | (1 << 5))) - *IXP23XX_PCI_CONTROL = temp; - - temp = *IXP23XX_PCI_CMDSTAT; - - if (temp & (1 << 29)) - *IXP23XX_PCI_CMDSTAT = temp; - - return 0; -} - -static void __init ixp23xx_pci_common_init(void) -{ -#ifdef __ARMEB__ - *IXP23XX_PCI_CONTROL |= 0x20000; /* set I/O swapping */ -#endif - /* - * ADDR_31 needs to be clear for PCI memory access to CPP memory - */ - *IXP23XX_CPP2XSI_CURR_XFER_REG3 &= ~IXP23XX_CPP2XSI_ADDR_31; - *IXP23XX_CPP2XSI_CURR_XFER_REG3 |= IXP23XX_CPP2XSI_PSH_OFF; - - /* - * Select correct memory for PCI inbound transactions - */ - if (ixp23xx_cpp_boot()) { - *IXP23XX_PCI_CPP_ADDR_BITS &= ~(1 << 1); - } else { - *IXP23XX_PCI_CPP_ADDR_BITS |= (1 << 1); - - /* - * Enable coherency on A2 silicon. - */ - if (arch_is_coherent()) - *IXP23XX_CPP2XSI_CURR_XFER_REG3 &= ~IXP23XX_CPP2XSI_COH_OFF; - } -} - -void __init ixp23xx_pci_preinit(void) -{ - pcibios_min_io = 0; - pcibios_min_mem = 0xe0000000; - - pci_set_flags(0); - - ixp23xx_pci_common_init(); - - hook_fault_code(16+6, ixp23xx_pci_abort_handler, SIGBUS, 0, - "PCI config cycle to non-existent device"); - - *IXP23XX_PCI_ADDR_EXT = 0x0000e000; -} - -/* - * Prevent PCI layer from seeing the inbound host-bridge resources - */ -static void __devinit pci_fixup_ixp23xx(struct pci_dev *dev) -{ - int i; - - dev->class &= 0xff; - dev->class |= PCI_CLASS_BRIDGE_HOST << 8; - for (i = 0; i < PCI_NUM_RESOURCES; i++) { - dev->resource[i].start = 0; - dev->resource[i].end = 0; - dev->resource[i].flags = 0; - } -} -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x9002, pci_fixup_ixp23xx); - -/* - * IXP2300 systems often have large resource requirements, so we just - * use our own resource space. - */ -static struct resource ixp23xx_pci_mem_space = { - .start = IXP23XX_PCI_MEM_START, - .end = IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE - 1, - .flags = IORESOURCE_MEM, - .name = "PCI Mem Space" -}; - -static struct resource ixp23xx_pci_io_space = { - .start = 0x00000100, - .end = 0x01ffffff, - .flags = IORESOURCE_IO, - .name = "PCI I/O Space" -}; - -int ixp23xx_pci_setup(int nr, struct pci_sys_data *sys) -{ - if (nr >= 1) - return 0; - - pci_add_resource_offset(&sys->resources, - &ixp23xx_pci_io_space, sys->io_offset); - pci_add_resource_offset(&sys->resources, - &ixp23xx_pci_mem_space, sys->mem_offset); - - return 1; -} - -void __init ixp23xx_pci_slave_init(void) -{ - ixp23xx_pci_common_init(); -} diff --git a/arch/arm/mach-ixp23xx/roadrunner.c b/arch/arm/mach-ixp23xx/roadrunner.c deleted file mode 100644 index eaaa3fa9fd0..00000000000 --- a/arch/arm/mach-ixp23xx/roadrunner.c +++ /dev/null @@ -1,180 +0,0 @@ -/* - * arch/arm/mach-ixp23xx/roadrunner.c - * - * RoadRunner board-specific routines - * - * Author: Deepak Saxena <dsaxena@plexity.net> - * - * Copyright 2005 (c) MontaVista Software, Inc. - * - * Based on 2.4 code Copyright 2005 (c) ADI Engineering Corporation - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/spinlock.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/serial.h> -#include <linux/tty.h> -#include <linux/bitops.h> -#include <linux/ioport.h> -#include <linux/serial_8250.h> -#include <linux/serial_core.h> -#include <linux/device.h> -#include <linux/mm.h> -#include <linux/pci.h> -#include <linux/mtd/physmap.h> - -#include <asm/types.h> -#include <asm/setup.h> -#include <asm/memory.h> -#include <mach/hardware.h> -#include <asm/mach-types.h> -#include <asm/irq.h> -#include <asm/tlbflush.h> -#include <asm/pgtable.h> - -#include <asm/mach/map.h> -#include <asm/mach/irq.h> -#include <asm/mach/arch.h> -#include <asm/mach/pci.h> - -/* - * Interrupt mapping - */ -#define INTA IRQ_ROADRUNNER_PCI_INTA -#define INTB IRQ_ROADRUNNER_PCI_INTB -#define INTC IRQ_ROADRUNNER_PCI_INTC -#define INTD IRQ_ROADRUNNER_PCI_INTD - -#define INTC_PIN IXP23XX_GPIO_PIN_11 -#define INTD_PIN IXP23XX_GPIO_PIN_12 - -static int __init roadrunner_map_irq(const struct pci_dev *dev, u8 idsel, - u8 pin) -{ - static int pci_card_slot_irq[] = {INTB, INTC, INTD, INTA}; - static int pmc_card_slot_irq[] = {INTA, INTB, INTC, INTD}; - static int usb_irq[] = {INTB, INTC, INTD, -1}; - static int mini_pci_1_irq[] = {INTB, INTC, -1, -1}; - static int mini_pci_2_irq[] = {INTC, INTD, -1, -1}; - - switch(dev->bus->number) { - case 0: - switch(dev->devfn) { - case 0x0: // PCI-PCI bridge - break; - case 0x8: // PCI Card Slot - return pci_card_slot_irq[pin - 1]; - case 0x10: // PMC Slot - return pmc_card_slot_irq[pin - 1]; - case 0x18: // PMC Slot Secondary Agent - break; - case 0x20: // IXP Processor - break; - default: - return NO_IRQ; - } - break; - - case 1: - switch(dev->devfn) { - case 0x0: // IDE Controller - return (pin == 1) ? INTC : -1; - case 0x8: // USB fun 0 - case 0x9: // USB fun 1 - case 0xa: // USB fun 2 - return usb_irq[pin - 1]; - case 0x10: // Mini PCI 1 - return mini_pci_1_irq[pin-1]; - case 0x18: // Mini PCI 2 - return mini_pci_2_irq[pin-1]; - case 0x20: // MEM slot - return (pin == 1) ? INTA : -1; - default: - return NO_IRQ; - } - break; - - default: - return NO_IRQ; - } - - return NO_IRQ; -} - -static void __init roadrunner_pci_preinit(void) -{ - irq_set_irq_type(IRQ_ROADRUNNER_PCI_INTC, IRQ_TYPE_LEVEL_LOW); - irq_set_irq_type(IRQ_ROADRUNNER_PCI_INTD, IRQ_TYPE_LEVEL_LOW); - - ixp23xx_pci_preinit(); -} - -static struct hw_pci roadrunner_pci __initdata = { - .nr_controllers = 1, - .preinit = roadrunner_pci_preinit, - .setup = ixp23xx_pci_setup, - .scan = ixp23xx_pci_scan_bus, - .map_irq = roadrunner_map_irq, -}; - -static int __init roadrunner_pci_init(void) -{ - if (machine_is_roadrunner()) - pci_common_init(&roadrunner_pci); - - return 0; -}; - -subsys_initcall(roadrunner_pci_init); - -static struct physmap_flash_data roadrunner_flash_data = { - .width = 2, -}; - -static struct resource roadrunner_flash_resource = { - .start = 0x90000000, - .end = 0x93ffffff, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device roadrunner_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &roadrunner_flash_data, - }, - .num_resources = 1, - .resource = &roadrunner_flash_resource, -}; - -static void __init roadrunner_init(void) -{ - platform_device_register(&roadrunner_flash); - - /* - * Mark flash as writeable - */ - IXP23XX_EXP_CS0[0] |= IXP23XX_FLASH_WRITABLE; - IXP23XX_EXP_CS0[1] |= IXP23XX_FLASH_WRITABLE; - IXP23XX_EXP_CS0[2] |= IXP23XX_FLASH_WRITABLE; - IXP23XX_EXP_CS0[3] |= IXP23XX_FLASH_WRITABLE; - - ixp23xx_sys_init(); -} - -MACHINE_START(ROADRUNNER, "ADI Engineering RoadRunner Development Platform") - /* Maintainer: Deepak Saxena */ - .map_io = ixp23xx_map_io, - .init_irq = ixp23xx_init_irq, - .timer = &ixp23xx_timer, - .atag_offset = 0x100, - .init_machine = roadrunner_init, - .restart = ixp23xx_restart, -MACHINE_END |