Merge tag 'regulator-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "Not much exciting going on with the regulator API this time around,
  lots of driver fixes and enhancements - the main thing is the addition
  of a new API to help make the stubbing code do the right thing for
  missing regulator mappings.

  Highlights:

   - A new regulator_get_optional() API call for regulators that can be
     absent in normal operation.  This currently does nothing but will
     be used to improve the stubbing code for unspecified regulators,
     helping avoid some of the issues we've seen with adding new
     regulator support.
   - Helpers for devices with multiple linear ranges of voltages in the
     same regulator.
   - Moved the helpers into a separate file since core.c is getting
     rather large.
   - New drivers for Dialog DA9210 and DA9063, Freescale pfuze100 and
     Marvell 88pm800"

* tag 'regulator-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (70 commits)
  regulator: da9063: Statize da9063_ldo_lim_event
  regulator: lp872x: Make REGULATOR_LP872X depend on I2C rather than I2C=y
  regulator: tps65217: Convert to use linear ranges
  regulator: da9063: Use IS_ERR to check return value of regulator_register()
  regulator: da9063: Optimize da9063_set_current_limit implementation
  regulator: build: Allow most regulators to be built as modules
  regulator: Add devm_regulator_get_exclusive()
  regulator: da9063: Add Dialog DA9063 voltage regulators support.
  regulator: ti-abb: simplify platform_get_resource_byname/devm_ioremap_resource
  hwmon: (sht15) Use devm_regulator_get_optional()
  regulator: core: Use bool for exclusivitity flag
  regulator: 88pm800: forever loop in pm800_regulator_probe()
  cpufreq: cpufreq-cpu0: Use devm_regulator_get_optional()
  regulator: da9210: Remove redundant MODULE_ALIAS
  regulator: 88pm800: Fix checking whether num_regulator is valid
  regulator: s2mps11: Fix setting ramp_delay
  regulator: s2mps11: Fix wrong arguments for regmap_update_bits() call
  regulator: palmas: Update the DT binding doc for smps10 out1 and out2
  regulator: palmas: model SMPS10 as two regulators
  regulator: core: Move list_voltage_{linear,linear_range,table} to helpers.c
  ...

72 files changed, 3840 insertions, 1116 deletions

diff --git a/Documentation/devicetree/bindings/regulator/88pm800.txt b/Documentation/devicetree/bindings/regulator/88pm800.txt
new file mode 100644
index 00000000000..e8a54c2a582
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/88pm800.txt
@@ -0,0 +1,38 @@
+Marvell 88PM800 regulator
+
+Required properties:
+- compatible: "marvell,88pm800"
+- reg: I2C slave address
+- regulators: A node that houses a sub-node for each regulator within the
+  device. Each sub-node is identified using the node's name (or the deprecated
+  regulator-compatible property if present), with valid values listed below.
+  The content of each sub-node is defined by the standard binding for
+  regulators; see regulator.txt.
+
+The valid names for regulators are:
+
+  buck1, buck2, buck3, buck4, buck5, ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7,
+  ldo8, ldo9, ldo10, ldo11, ldo12, ldo13, ldo14, ldo15, ldo16, ldo17, ldo18, ldo19
+
+Example:
+
+	pmic: 88pm800@31 {
+		compatible = "marvell,88pm800";
+		reg = <0x31>;
+
+		regulators {
+			buck1 {
+			        regulator-min-microvolt = <600000>;
+			        regulator-max-microvolt = <3950000>;
+			        regulator-boot-on;
+			        regulator-always-on;
+			};
+			ldo1 {
+			        regulator-min-microvolt = <600000>;
+			        regulator-max-microvolt = <15000000>;
+			        regulator-boot-on;
+			        regulator-always-on;
+			};
+...
+		};
+	};
diff --git a/Documentation/devicetree/bindings/regulator/max8660.txt b/Documentation/devicetree/bindings/regulator/max8660.txt
new file mode 100644
index 00000000000..8ba994d8a14
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/max8660.txt
@@ -0,0 +1,47 @@
+Maxim MAX8660 voltage regulator
+
+Required properties:
+- compatible: must be one of "maxim,max8660", "maxim,max8661"
+- reg: I2C slave address, usually 0x34
+- any required generic properties defined in regulator.txt
+
+Example:
+
+	i2c_master {
+		max8660@34 {
+			compatible = "maxim,max8660";
+			reg = <0x34>;
+
+			regulators {
+				regulator@0 {
+					regulator-compatible= "V3(DCDC)";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				regulator@1 {
+					regulator-compatible= "V4(DCDC)";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				regulator@2 {
+					regulator-compatible= "V5(LDO)";
+					regulator-min-microvolt = <1700000>;
+					regulator-max-microvolt = <2000000>;
+				};
+
+				regulator@3 {
+					regulator-compatible= "V6(LDO)";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				regulator@4 {
+					regulator-compatible= "V7(LDO)";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+				};
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/regulator/palmas-pmic.txt b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt
index 30b0581bb1c..a22e4c70db5 100644
--- a/Documentation/devicetree/bindings/regulator/palmas-pmic.txt
+++ b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt
@@ -25,8 +25,8 @@ Optional nodes:
 	       Additional custom properties  are listed below.
 
 	       For ti,palmas-pmic - smps12, smps123, smps3 depending on OTP,
-	       smps45, smps457, smps7 depending on variant, smps6, smps[8-10],
-	       ldo[1-9], ldoln, ldousb.
+	       smps45, smps457, smps7 depending on variant, smps6, smps[8-9],
+	       smps10_out2, smps10_out1, do[1-9], ldoln, ldousb.
 
 	       Optional sub-node properties:
 	       ti,warm-reset - maintain voltage during warm reset(boolean)
diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.txt b/Documentation/devicetree/bindings/regulator/pfuze100.txt
new file mode 100644
index 00000000000..fc989b2e805
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/pfuze100.txt
@@ -0,0 +1,115 @@
+PFUZE100 family of regulators
+
+Required properties:
+- compatible: "fsl,pfuze100"
+- reg: I2C slave address
+
+Required child node:
+- regulators: This is the list of child nodes that specify the regulator
+  initialization data for defined regulators. Please refer to below doc
+  Documentation/devicetree/bindings/regulator/regulator.txt.
+
+  The valid names for regulators are:
+  sw1ab,sw1c,sw2,sw3a,sw3b,sw4,swbst,vsnvs,vrefddr,vgen1~vgen6
+
+Each regulator is defined using the standard binding for regulators.
+
+Example:
+
+	pmic: pfuze100@08 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt
index 48a3b8e5d6b..2bd8f097876 100644
--- a/Documentation/devicetree/bindings/regulator/regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/regulator.txt
@@ -12,6 +12,8 @@ Optional properties:
 - regulator-allow-bypass: allow the regulator to go into bypass mode
 - <name>-supply: phandle to the parent supply/regulator node
 - regulator-ramp-delay: ramp delay for regulator(in uV/uS)
+  For hardwares which support disabling ramp rate, it should be explicitly
+  intialised to zero (regulator-ramp-delay = <0>) for disabling ramp delay.
 
 Deprecated properties:
 - regulator-compatible: If a regulator chip contains multiple
diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-cpu0.c
index ad1fde27766..e9dedb27dec 100644
--- a/drivers/cpufreq/cpufreq-cpu0.c
+++ b/drivers/cpufreq/cpufreq-cpu0.c
@@ -197,7 +197,7 @@ static int cpu0_cpufreq_probe(struct platform_device *pdev)
 	cpu_dev = &pdev->dev;
 	cpu_dev->of_node = np;
 
-	cpu_reg = devm_regulator_get(cpu_dev, "cpu0");
+	cpu_reg = devm_regulator_get_optional(cpu_dev, "cpu0");
 	if (IS_ERR(cpu_reg)) {
 		/*
 		 * If cpu0 regulator supply node is present, but regulator is
diff --git a/drivers/hwmon/sht15.c b/drivers/hwmon/sht15.c
index 2507f902fb7..ab5dc3af4cf 100644
--- a/drivers/hwmon/sht15.c
+++ b/drivers/hwmon/sht15.c
@@ -957,7 +957,7 @@ static int sht15_probe(struct platform_device *pdev)
 	 * If a regulator is available,
 	 * query what the supply voltage actually is!
 	 */
-	data->reg = devm_regulator_get(data->dev, "vcc");
+	data->reg = devm_regulator_get_optional(data->dev, "vcc");
 	if (!IS_ERR(data->reg)) {
 		int voltage;
 
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 49a5bca418b..5d088551196 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -1313,7 +1313,7 @@ int mmc_regulator_get_supply(struct mmc_host *mmc)
 
 	supply = devm_regulator_get(dev, "vmmc");
 	mmc->supply.vmmc = supply;
-	mmc->supply.vqmmc = devm_regulator_get(dev, "vqmmc");
+	mmc->supply.vqmmc = devm_regulator_get_optional(dev, "vqmmc");
 
 	if (IS_ERR(supply))
 		return PTR_ERR(supply);
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index ee5f1676f14..542407363dd 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -2231,7 +2231,7 @@ int dw_mci_probe(struct dw_mci *host)
 		}
 	}
 
-	host->vmmc = devm_regulator_get(host->dev, "vmmc");
+	host->vmmc = devm_regulator_get_optional(host->dev, "vmmc");
 	if (IS_ERR(host->vmmc)) {
 		ret = PTR_ERR(host->vmmc);
 		if (ret == -EPROBE_DEFER)
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index 2c5a91bb8ec..1956a3df7cf 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -83,7 +83,7 @@ struct pxamci_host {
 static inline void pxamci_init_ocr(struct pxamci_host *host)
 {
 #ifdef CONFIG_REGULATOR
-	host->vcc = regulator_get(mmc_dev(host->mmc), "vmmc");
+	host->vcc = regulator_get_optional(mmc_dev(host->mmc), "vmmc");
 
 	if (IS_ERR(host->vcc))
 		host->vcc = NULL;
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index a78bd4f3aec..dd2c083c434 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -2966,7 +2966,7 @@ int sdhci_add_host(struct sdhci_host *host)
 		mmc->caps |= MMC_CAP_NEEDS_POLL;
 
 	/* If vqmmc regulator and no 1.8V signalling, then there's no UHS */
-	host->vqmmc = regulator_get(mmc_dev(mmc), "vqmmc");
+	host->vqmmc = regulator_get_optional(mmc_dev(mmc), "vqmmc");
 	if (IS_ERR_OR_NULL(host->vqmmc)) {
 		if (PTR_ERR(host->vqmmc) < 0) {
 			pr_info("%s: no vqmmc regulator found\n",
@@ -3042,7 +3042,7 @@ int sdhci_add_host(struct sdhci_host *host)
 
 	ocr_avail = 0;
 
-	host->vmmc = regulator_get(mmc_dev(mmc), "vmmc");
+	host->vmmc = regulator_get_optional(mmc_dev(mmc), "vmmc");
 	if (IS_ERR_OR_NULL(host->vmmc)) {
 		if (PTR_ERR(host->vmmc) < 0) {
 			pr_info("%s: no vmmc regulator found\n",
diff --git a/drivers/regulator/88pm800.c b/drivers/regulator/88pm800.c
new file mode 100644
index 00000000000..3459f60dcfd
--- /dev/null
+++ b/drivers/regulator/88pm800.c
@@ -0,0 +1,383 @@
+/*
+ * Regulators driver for Marvell 88PM800
+ *
+ * Copyright (C) 2012 Marvell International Ltd.
+ * Joseph(Yossi) Hanin <yhanin@marvell.com>
+ * Yi Zhang <yizhang@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/88pm80x.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/regulator/of_regulator.h>
+
+/* LDO1 with DVC[0..3] */
+#define PM800_LDO1_VOUT		(0x08) /* VOUT1 */
+#define PM800_LDO1_VOUT_2	(0x09)
+#define PM800_LDO1_VOUT_3	(0x0A)
+#define PM800_LDO2_VOUT		(0x0B)
+#define PM800_LDO3_VOUT		(0x0C)
+#define PM800_LDO4_VOUT		(0x0D)
+#define PM800_LDO5_VOUT		(0x0E)
+#define PM800_LDO6_VOUT		(0x0F)
+#define PM800_LDO7_VOUT		(0x10)
+#define PM800_LDO8_VOUT		(0x11)
+#define PM800_LDO9_VOUT		(0x12)
+#define PM800_LDO10_VOUT	(0x13)
+#define PM800_LDO11_VOUT	(0x14)
+#define PM800_LDO12_VOUT	(0x15)
+#define PM800_LDO13_VOUT	(0x16)
+#define PM800_LDO14_VOUT	(0x17)
+#define PM800_LDO15_VOUT	(0x18)
+#define PM800_LDO16_VOUT	(0x19)
+#define PM800_LDO17_VOUT	(0x1A)
+#define PM800_LDO18_VOUT	(0x1B)
+#define PM800_LDO19_VOUT	(0x1C)
+
+/* BUCK1 with DVC[0..3] */
+#define PM800_BUCK1		(0x3C)
+#define PM800_BUCK1_1		(0x3D)
+#define PM800_BUCK1_2		(0x3E)
+#define PM800_BUCK1_3		(0x3F)
+#define PM800_BUCK2		(0x40)
+#define PM800_BUCK3		(0x41)
+#define PM800_BUCK3		(0x41)
+#define PM800_BUCK4		(0x42)
+#define PM800_BUCK4_1		(0x43)
+#define PM800_BUCK4_2		(0x44)
+#define PM800_BUCK4_3		(0x45)
+#define PM800_BUCK5		(0x46)
+
+#define PM800_BUCK_ENA		(0x50)
+#define PM800_LDO_ENA1_1	(0x51)
+#define PM800_LDO_ENA1_2	(0x52)
+#define PM800_LDO_ENA1_3	(0x53)
+
+#define PM800_LDO_ENA2_1	(0x56)
+#define PM800_LDO_ENA2_2	(0x57)
+#define PM800_LDO_ENA2_3	(0x58)
+
+#define PM800_BUCK1_MISC1	(0x78)
+#define PM800_BUCK3_MISC1	(0x7E)
+#define PM800_BUCK4_MISC1	(0x81)
+#define PM800_BUCK5_MISC1	(0x84)
+
+struct pm800_regulator_info {
+	struct regulator_desc desc;
+	int max_ua;
+};
+
+struct pm800_regulators {
+	struct regulator_dev *regulators[PM800_ID_RG_MAX];
+	struct pm80x_chip *chip;
+	struct regmap *map;
+};
+
+/*
+ * vreg - the buck regs string.
+ * ereg - the string for the enable register.
+ * ebit - the bit number in the enable register.
+ * amax - the current
+ * Buck has 2 kinds of voltage steps. It is easy to find voltage by ranges,
+ * not the constant voltage table.
+ * n_volt - Number of available selectors
+ */
+#define PM800_BUCK(vreg, ereg, ebit, amax, volt_ranges, n_volt)		\
+{									\
+	.desc	= {							\