Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  b44: Use kernel DMA addresses for the kernel DMA API
  forcedeth: Fix resume from hibernation regression.
  xfrm: fix fragmentation on inter family tunnels
  ibm_newemac: Fix dangerous struct assumption
  gigaset: documentation update
  gigaset: in file ops, check for device disconnect before anything else
  bas_gigaset: use tasklet_hi_schedule for timing critical tasklets
  net/802/fddi.c: add MODULE_LICENSE
  smsc911x: remove unused #include <linux/version.h>
  axnet_cs: fix phy_id detection for bogus Asix chip.
  bnx2: Use request_firmware()
  b44: Fix sizes passed to b44_sync_dma_desc_for_{device,cpu}()
  socket: use percpu_add() while updating sockets_in_use
  virtio_net: Set the mac config only when VIRITO_NET_F_MAC
  myri_sbus: use request_firmware
  e1000: fix loss of multicast packets
  vxge: should include tcp.h

Conflict in firmware/WHENCE (SCSI vs net firmware)

28 files changed, 17751 insertions, 14190 deletions

diff --git a/Documentation/isdn/README.gigaset b/Documentation/isdn/README.gigaset
index 55b2852904a..02c0e9341dd 100644
--- a/Documentation/isdn/README.gigaset
+++ b/Documentation/isdn/README.gigaset
@@ -61,24 +61,28 @@ GigaSet 307x Device Driver
      ---------------------
 2.1. Modules
      -------
-     To get the device working, you have to load the proper kernel module. You
-     can do this using
-         modprobe modulename
-     where modulename is ser_gigaset (M101), usb_gigaset (M105), or
-     bas_gigaset (direct USB connection to the base).
+     For the devices to work, the proper kernel modules have to be loaded.
+     This normally happens automatically when the system detects the USB
+     device (base, M105) or when the line discipline is attached (M101). It
+     can also be triggered manually using the modprobe(8) command, for example
+     for troubleshooting or to pass module parameters.
 
      The module ser_gigaset provides a serial line discipline N_GIGASET_M101
-     which drives the device through the regular serial line driver. To use it,
-     run the Gigaset M101 daemon "gigasetm101d" (also available from
-     http://sourceforge.net/projects/gigaset307x/) with the device file of the
-     RS232 port to the M101 as an argument, for example:
-	 gigasetm101d /dev/ttyS1
-     This will open the device file, set its line discipline to N_GIGASET_M101,
-     and then sleep in the background, keeping the device open so that the
-     line discipline remains active. To deactivate it, kill the daemon, for
-     example with
-	 killall gigasetm101d
-     before disconnecting the device.
+     which drives the device through the regular serial line driver. It must
+     be attached to the serial line to which the M101 is connected with the
+     ldattach(8) command (requires util-linux-ng release 2.14 or later), for
+     example:
+	 ldattach GIGASET_M101 /dev/ttyS1
+     This will open the device file, attach the line discipline to it, and
+     then sleep in the background, keeping the device open so that the line
+     discipline remains active. To deactivate it, kill the daemon, for example
+     with
+	 killall ldattach
+     before disconnecting the device. To have this happen automatically at
+     system startup/shutdown on an LSB compatible system, create and activate
+     an appropriate LSB startup script /etc/init.d/gigaset. (The init name
+     'gigaset' is officially assigned to this project by LANANA.)
+     Alternatively, just add the 'ldattach' command line to /etc/rc.local.
 
 2.2. Device nodes for user space programs
      ------------------------------------
@@ -194,10 +198,11 @@ GigaSet 307x Device Driver
      operation (for wireless access to the base), but are needed for access
      to the M105's own configuration mode (registration to the base, baudrate
      and line format settings, device status queries) via the gigacontr
-     utility. Their use is disabled in the driver by default for safety
-     reasons but can be enabled by setting the kernel configuration option
-     "Support for undocumented USB requests" (GIGASET_UNDOCREQ) to "Y" and
-     recompiling.
+     utility. Their use is controlled by the kernel configuration option
+     "Support for undocumented USB requests" (CONFIG_GIGASET_UNDOCREQ). If you
+     encounter error code -ENOTTY when trying to use some features of the
+     M105, try setting that option to "y" via 'make {x,menu}config' and
+     recompiling the driver.
 
 
 3.   Troubleshooting
@@ -228,6 +233,13 @@ GigaSet 307x Device Driver
      Solution:
         Select Unimodem mode for all DECT data adapters. (see section 2.4.)
 
+     Problem:
+        You want to configure your USB DECT data adapter (M105) but gigacontr
+        reports an error: "/dev/ttyGU0: Inappropriate ioctl for device".
+     Solution:
+        Recompile the usb_gigaset driver with the kernel configuration option
+        CONFIG_GIGASET_UNDOCREQ set to 'y'. (see section 2.6.)
+
 3.2. Telling the driver to provide more information
      ----------------------------------------------
      Building the driver with the "Gigaset debugging" kernel configuration
diff --git a/drivers/isdn/gigaset/bas-gigaset.c b/drivers/isdn/gigaset/bas-gigaset.c
index 831ddce1467..781c4041f7b 100644
--- a/drivers/isdn/gigaset/bas-gigaset.c
+++ b/drivers/isdn/gigaset/bas-gigaset.c
@@ -821,7 +821,7 @@ static void read_iso_callback(struct urb *urb)
 		/* pass URB to tasklet */
 		ubc->isoindone = urb;
 		ubc->isoinstatus = status;
-		tasklet_schedule(&ubc->rcvd_tasklet);
+		tasklet_hi_schedule(&ubc->rcvd_tasklet);
 	} else {
 		/* tasklet still busy, drop data and resubmit URB */
 		ubc->loststatus = status;
@@ -888,7 +888,7 @@ static void write_iso_callback(struct urb *urb)
 	ubc->isooutovfl = ubc->isooutdone;
 	ubc->isooutdone = ucx;
 	spin_unlock_irqrestore(&ubc->isooutlock, flags);
-	tasklet_schedule(&ubc->sent_tasklet);
+	tasklet_hi_schedule(&ubc->sent_tasklet);
 }
 
 /* starturbs
diff --git a/drivers/isdn/gigaset/interface.c b/drivers/isdn/gigaset/interface.c
index 311e7ca0fb0..820a30923fe 100644
--- a/drivers/isdn/gigaset/interface.c
+++ b/drivers/isdn/gigaset/interface.c
@@ -193,7 +193,9 @@ static void if_close(struct tty_struct *tty, struct file *filp)
 
 	mutex_lock(&cs->mutex);
 
-	if (!cs->open_count)
+	if (!cs->connected)
+		gig_dbg(DEBUG_IF, "not connected");	/* nothing to do */
+	else if (!cs->open_count)
 		dev_warn(cs->dev, "%s: device not opened\n", __func__);
 	else {
 		if (!--cs->open_count) {
@@ -228,7 +230,10 @@ static int if_ioctl(struct tty_struct *tty, struct file *file,
 	if (mutex_lock_interruptible(&cs->mutex))
 		return -ERESTARTSYS; // FIXME -EINTR?
 
-	if (!cs->open_count)
+	if (!cs->connected) {
+		gig_dbg(DEBUG_IF, "not connected");
+		retval = -ENODEV;
+	} else if (!cs->open_count)
 		dev_warn(cs->dev, "%s: device not opened\n", __func__);
 	else {
 		retval = 0;
@@ -248,13 +253,6 @@ static int if_ioctl(struct tty_struct *tty, struct file *file,
 				retval = put_user(int_arg, (int __user *) arg);
 			break;
 		case GIGASET_BRKCHARS:
-			//FIXME test if MS_LOCKED
-			if (!cs->connected) {
-				gig_dbg(DEBUG_ANY,
-				    "can't communicate with unplugged device");
-				retval = -ENODEV;
-				break;
-			}
 			retval = copy_from_user(&buf,
 					(const unsigned char __user *) arg, 6)
 				? -EFAULT : 0;
@@ -331,7 +329,7 @@ static int if_tiocmset(struct tty_struct *tty, struct file *file,
 		return -ERESTARTSYS; // FIXME -EINTR?
 
 	if (!cs->connected) {
-		gig_dbg(DEBUG_ANY, "can't communicate with unplugged device");
+		gig_dbg(DEBUG_IF, "not connected");
 		retval = -ENODEV;
 	} else {
 		mc = (cs->control_state | set) & ~clear & (TIOCM_RTS|TIOCM_DTR);
@@ -360,14 +358,14 @@ static int if_write(struct tty_struct *tty, const unsigned char *buf, int count)
 	if (mutex_lock_interruptible(&cs->mutex))
 		return -ERESTARTSYS; // FIXME -EINTR?
 
-	if (!cs->open_count)
+	if (!cs->connected) {
+		gig_dbg(DEBUG_IF, "not connected");
+		retval = -ENODEV;
+	} else if (!cs->open_count)
 		dev_warn(cs->dev, "%s: device not opened\n", __func__);
 	else if (cs->mstate != MS_LOCKED) {
 		dev_warn(cs->dev, "can't write to unlocked device\n");
 		retval = -EBUSY;
-	} else if (!cs->connected) {
-		gig_dbg(DEBUG_ANY, "can't write to unplugged device");
-		retval = -EBUSY; //FIXME
 	} else {
 		retval = cs->ops->write_cmd(cs, buf, count,
 					    &cs->if_wake_tasklet);
@@ -394,14 +392,14 @@ static int if_write_room(struct tty_struct *tty)
 	if (mutex_lock_interruptible(&cs->mutex))
 		return -ERESTARTSYS; // FIXME -EINTR?
 
-	if (!cs->open_count)
+	if (!cs->connected) {
+		gig_dbg(DEBUG_IF, "not connected");
+		retval = -ENODEV;
+	} else if (!cs->open_count)
 		dev_warn(cs->dev, "%s: device not opened\n", __func__);
 	else if (cs->mstate != MS_LOCKED) {
 		dev_warn(cs->dev, "can't write to unlocked device\n");
 		retval = -EBUSY;
-	} else if (!cs->connected) {
-		gig_dbg(DEBUG_ANY, "can't write to unplugged device");
-		retval = -EBUSY; //FIXME
 	} else
 		retval = cs->ops->write_room(cs);
 
@@ -426,14 +424,14 @@ static int if_chars_in_buffer(struct tty_struct *tty)
 	if (mutex_lock_interruptible(&cs->mutex))
 		return -ERESTARTSYS; // FIXME -EINTR?
 
-	if (!cs->open_count)
+	if (!cs->connected) {
+		gig_dbg(DEBUG_IF, "not connected");
+		retval = -ENODEV;
+	} else if (!cs->open_count)
 		dev_warn(cs->dev, "%s: device not opened\n", __func__);
 	else if (cs->mstate != MS_LOCKED) {
 		dev_warn(cs->dev, "can't write to unlocked device\n");
 		retval = -EBUSY;
-	} else if (!cs->connected) {
-		gig_dbg(DEBUG_ANY, "can't write to unplugged device");
-		retval = -EBUSY; //FIXME
 	} else
 		retval = cs->ops->chars_in_buffer(cs);
 
@@ -456,7 +454,9 @@ static void if_throttle(struct tty_struct *tty)
 
 	mutex_lock(&cs->mutex);
 
-	if (!cs->open_count)
+	if (!cs->connected)
+		gig_dbg(DEBUG_IF, "not connected");	/* nothing to do */
+	else if (!cs->open_count)
 		dev_warn(cs->dev, "%s: device not opened\n", __func__);
 	else {
 		//FIXME
@@ -479,7 +479,9 @@ static void if_unthrottle(struct tty_struct *tty)
 
 	mutex_lock(&cs->mutex);
 
-	if (!cs->open_count)
+	if (!cs->connected)
+		gig_dbg(DEBUG_IF, "not connected");	/* nothing to do */
+	else if (!cs->open_count)
 		dev_warn(cs->dev, "%s: device not opened\n", __func__);
 	else {
 		//FIXME
@@ -506,13 +508,13 @@ static void if_set_termios(struct tty_struct *tty, struct ktermios *old)
 
 	mutex_lock(&cs->mutex);
 
-	if (!cs->open_count) {
-		dev_warn(cs->dev, "%s: device not opened\n", __func__);
+	if (!cs->connected) {
+		gig_dbg(DEBUG_IF, "not connected");
 		goto out;
 	}
 
-	if (!cs->connected) {
-		gig_dbg(DEBUG_ANY, "can't communicate with unplugged device");
+	if (!cs->open_count) {
+		dev_warn(cs->dev, "%s: device not opened\n", __func__);
 		goto out;
 	}
 
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 16899eee397..9e7baec4572 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2234,7 +2234,7 @@ config BNX2
 	tristate "Broadcom NetXtremeII support"
 	depends on PCI
 	select CRC32
-	select ZLIB_INFLATE
+	select FW_LOADER
 	help
 	  This driver supports Broadcom NetXtremeII gigabit Ethernet cards.
 
diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index 5c84541e073..17b2750d21d 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -703,7 +703,7 @@ static int b44_alloc_rx_skb(struct b44 *bp, int src_idx, u32 dest_idx_unmasked)
 
 	if (bp->flags & B44_FLAG_RX_RING_HACK)
 		b44_sync_dma_desc_for_device(bp->sdev, bp->rx_ring_dma,
-			                    dest_idx * sizeof(dp),
+			                    dest_idx * sizeof(*dp),
 			                    DMA_BIDIRECTIONAL);
 
 	return RX_PKT_BUF_SZ;
@@ -731,7 +731,7 @@ static void b44_recycle_rx(struct b44 *bp, int src_idx, u32 dest_idx_unmasked)
 
 	if (bp->flags & B44_FLAG_RX_RING_HACK)
 		b44_sync_dma_desc_for_cpu(bp->sdev, bp->rx_ring_dma,
-			                 src_idx * sizeof(src_desc),
+			                 src_idx * sizeof(*src_desc),
 			                 DMA_BIDIRECTIONAL);
 
 	ctrl = src_desc->ctrl;
@@ -747,10 +747,10 @@ static void b44_recycle_rx(struct b44 *bp, int src_idx, u32 dest_idx_unmasked)
 
 	if (bp->flags & B44_FLAG_RX_RING_HACK)
 		b44_sync_dma_desc_for_device(bp->sdev, bp->rx_ring_dma,
-					     dest_idx * sizeof(dest_desc),
+					     dest_idx * sizeof(*dest_desc),
 					     DMA_BIDIRECTIONAL);
 
-	ssb_dma_sync_single_for_device(bp->sdev, le32_to_cpu(src_desc->addr),
+	ssb_dma_sync_single_for_device(bp->sdev, dest_map->mapping,
 				       RX_PKT_BUF_SZ,
 				       DMA_FROM_DEVICE);
 }
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index ad446db8e18..17cbc8c6be3 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -46,19 +46,20 @@
 #include <linux/crc32.h>
 #include <linux/prefetch.h>
 #include <linux/cache.h>
-#include <linux/zlib.h>
+#include <linux/firmware.h>
 #include <linux/log2.h>
 
 #include "bnx2.h"
 #include "bnx2_fw.h"
-#include "bnx2_fw2.h"
-
-#define FW_BUF_SIZE		0x10000
 
 #define DRV_MODULE_NAME		"bnx2"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"1.9.3"
-#define DRV_MODULE_RELDATE	"March 17, 2009"
+#define DRV_MODULE_VERSION	"2.0.0"
+#define DRV_MODULE_RELDATE	"April 2, 2009"
+#define FW_MIPS_FILE_06		"bnx2/bnx2-mips-06-4.6.16.fw"
+#define FW_RV2P_FILE_06		"bnx2/bnx2-rv2p-06-4.6.16.fw"
+#define FW_MIPS_FILE_09		"bnx2/bnx2-mips-09-4.6.17.fw"
+#define FW_RV2P_FILE_09		"bnx2/bnx2-rv2p-09-4.6.15.fw"
 
 #define RUN_AT(x) (jiffies + (x))
 
@@ -72,6 +73,10 @@ MODULE_AUTHOR("Michael Chan <mchan@broadcom.com>");
 MODULE_DESCRIPTION("Broadcom NetXtreme II BCM5706/5708/5709/5716 Driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_MODULE_VERSION);
+MODULE_FIRMWARE(FW_MIPS_FILE_06);
+MODULE_FIRMWARE(FW_RV2P_FILE_06);
+MODULE_FIRMWARE(FW_MIPS_FILE_09);
+MODULE_FIRMWARE(FW_RV2P_FILE_09);
 
 static int disable_msi = 0;
 
@@ -3391,33 +3396,143 @@ bnx2_set_rx_mode(struct net_device *dev)
 	spin_unlock_bh(&bp->phy_lock);
 }
 
-static void
-load_rv2p_fw(struct bnx2 *bp, __le32 *rv2p_code, u32 rv2p_code_len,
-	u32 rv2p_proc)
+static int __devinit
+check_fw_section(const struct firmware *fw,
+		 const struct bnx2_fw_file_section *section,
+		 u32 alignment, bool non_empty)
+{
+	u32 offset = be32_to_cpu(section->offset);
+	u32 len = be32_to_cpu(section->len);
+
+	if ((offset == 0 && len != 0) || offset >= fw->size || offset & 3)
+		return -EINVAL;
+	if ((non_empty && len == 0) || len > fw->size - offset ||
+	    len & (alignment - 1))
+		return -EINVAL;
+	return 0;
+}
+
+static int __devinit
+check_mips_fw_entry(const struct firmware *fw,
+		    const struct bnx2_mips_fw_file_entry *entry)
+{
+	if (check_fw_section(fw, &entry->text, 4, true) ||
+	    check_fw_section(fw, &entry->data, 4, false) ||
+	    check_fw_section(fw, &entry->rodata, 4, false))
+		return -EINVAL;
+	return 0;
+}
+
+static int __devinit
+bnx2_request_firmware(struct bnx2 *bp)
 {
+	const char *mips_fw_file, *rv2p_fw_file;
+	const struct bnx2_mips_fw_file *mips;
+	const struct bnx2_rv2p_fw_file *rv2p;
+	int rc;
+
+	if (CHIP_NUM(bp) == CHIP_NUM_5709) {
+		mips_fw_file = FW_MIPS_FILE_09;
+		rv2p_fw_file = FW_RV2P_FILE_09;
+	} else {
+		mips_fw_file = FW_MIPS_FILE_06;
+		rv2p_fw_file = FW_RV2P_FILE_06;
+	}
+
+	rc = request_firmware(&bp->mips_firmware, mips_fw_file, &bp->pdev->dev);
+	if (rc) {
+		printk(KERN_ERR PFX "Can't load firmware file \"%s\"\n",
+		       mips_fw_file);
+		return rc;
+	}
+
+	rc = request_firmware(&bp->rv2p_firmware, rv2p_fw_file, &bp->pdev->dev);
+	if (rc) {
+		printk(KERN_ERR PFX "Can't load firmware file \"%s\"\n",
+		       rv2p_fw_file);
+		return rc;
+	}
+	mips = (const struct bnx2_mips_fw_file *) bp->mips_firmware->data;
+	rv2p = (const struct bnx2_rv2p_fw_file *) bp->rv2p_firmware->data;
+	if (bp->mips_firmware->size < sizeof(*mips) ||
+	    check_mips_fw_entry(bp->mips_firmware, &mips->com) ||
+	    check_mips_fw_entry(bp->mips_firmware, &mips->cp) ||
+	    check_mips_fw_entry(bp->mips_firmware, &mips->rxp) ||
+	    check_mips_fw_entry(bp->mips_firmware, &mips->tpat) ||
+	    check_mips_fw_entry(bp->mips_firmware, &mips->txp)) {
+		printk(KERN_ERR PFX "Firmware file \"%s\" is invalid\n",
+		       mips_fw_file);
+		return -EINVAL;
+	}
+	if (bp->rv2p_firmware->size < sizeof(*rv2p) ||
+	    check_fw_section(bp->rv2p_firmware, &rv2p->proc1.rv2p, 8, true) ||
+	    check_fw_section(bp->rv2p_firmware, &rv2p->proc2.rv2p, 8, true)) {
+		printk(KERN_ERR PFX "Firmware file \"%s\" is invalid\n",
+		       rv2p_fw_file);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static u32
+rv2p_fw_fixup(u32 rv2p_proc, int idx, u32 loc, u32 rv2p_code)
+{
+	switch (idx) {
+	case RV2P_P1_FIXUP_PAGE_SIZE_IDX:
+		rv2p_code &= ~RV2P_BD_PAGE_SIZE_MSK;
+		rv2p_code |= RV2P_BD_PAGE_SIZE;
+		break;
+	}
+	return rv2p_code;
+}
+
+static int
+load_rv2p_fw(struct bnx2 *bp, u32 rv2p_proc,
+	     const struct bnx2_rv2p_fw_file_entry *fw_entry)
+{
+	u32 rv2p_code_len, file_offset;
+	__be32 *rv2p_code;
 	int i;
-	u32 val;
+	u32 val, cmd, addr;
+
+	rv2p_code_len = be32_to_cpu(fw_entry->rv2p.len);
+	file_offset = be32_to_cpu(fw_entry->rv2p.offset);
+
+	rv2p_code = (__be32 *)(bp->rv2p_firmware->data + file_offset);
 
-	if (rv2p_proc == RV2P_PROC2 && CHIP_NUM(bp) == CHIP_NUM_5709) {
-		val = le32_to_cpu(rv2p_code[XI_RV2P_PROC2_MAX_BD_PAGE_LOC]);
-		val &= ~XI_RV2P_PROC2_BD_PAGE_SIZE_MSK;
-		val |= XI_RV2P_PROC2_BD_PAGE_SIZE;
-		rv2p_code[XI_RV2P_PROC2_MAX_BD_PAGE_LOC] = cpu_to_le32(val);
+	if (rv2p_proc == RV2P_PROC1) {
+		cmd = BNX2_RV2P_PROC1_ADDR_CMD_RDWR;
+		addr = BNX2_RV2P_PROC1_ADDR_CMD;
+	} else {
+		cmd = BNX2_RV2P_PROC2_ADDR_CMD_RDWR;
+		addr = BNX2_RV2P_PROC2_ADDR_CMD;
 	}
 
 	for (i = 0; i < rv2p_code_len; i += 8) {
-		REG_WR(bp, BNX2_RV2P_INSTR_HIGH, le32_to_cpu(*rv2p_code));
+		REG_WR(bp, BNX2_RV2P_INSTR_HIGH, be32_to_cpu(*rv2p_code));
 		rv2p_code++;
-		REG_WR(bp, BNX2_RV2P_INSTR_LOW, le32_to_cpu(*rv2p_code));
+		REG_WR(bp, BNX2_RV2P_INSTR_LOW, be32_to_cpu(*rv2p_code));
 		rv2p_code++;
 
-		if (rv2p_proc == RV2P_PROC1) {
-			val = (i / 8) | BNX2_RV2P_PROC1_ADDR_CMD_RDWR;
-			REG_WR(bp, BNX2_RV2P_PROC1_ADDR_CMD, val);
-		}
-		else {
-			val = (i / 8) | BNX2_RV2P_PROC2_ADDR_CMD_RDWR;
-			REG_WR(bp, BNX2_RV2P_PROC2_ADDR_CMD, val);
+		val = (i / 8) | cmd;
+		REG_WR(bp, addr, val);
+	}
+
+	rv2p_code = (__be32 *)(bp->rv2p_firmware->data + file_offset);
+	for (i = 0; i < 8; i++) {
+		u32 loc, code;
+
+		loc = be32_to_cpu(fw_entry->fixup[i]);
+		if (loc && ((loc * 4) < rv2p_code_len)) {
+			code = be32_to_cpu(*(rv2p_code + loc - 1));
+			REG_WR(bp, BNX2_RV2P_INSTR_HIGH, code);
+			code = be32_to_cpu(*(rv2p_code + loc));
+			code = rv2p_fw_fixup(rv2p_proc, i, loc, code);
+			REG_WR(bp, BNX2_RV2P_INSTR_LOW, code);
+
+			val = (loc / 2) | cmd;
+			REG_WR(bp, addr, val);
 		}
 	}
 
@@ -3428,14 +3543,18 @@ load_rv2p_fw(struct bnx2 *bp, __le32 *rv2p_code, u32 rv2p_code_len,
 	else {
 		REG_WR(bp, BNX2_RV2P_COMMAND, BNX2_RV2P_COMMAND_PROC2_RESET);
 	}
+
+	return 0;
 }
 
 static int
-load_cpu_fw(struct bnx2 *bp, const struct cpu_reg *cpu_reg, struct fw_info *fw)
+load_cpu_fw(struct bnx2 *bp, const struct cpu_reg *cpu_reg,
+	    const struct bnx2_mips_fw_file_entry *fw_entry)
 {
+	u32 addr, len, file_offset;
+	__be32 *data;
 	u32 offset;
 	u32 val;
-	int rc;
 
 	/* Halt the CPU. */
 	val = bnx2_reg_rd_ind(bp, cpu_reg->mode);
@@ -3444,64 +3563,52 @@ load_cpu_fw(struct bnx2 *bp, const struct cpu_reg *cpu_reg, struct fw_info *fw)
 	bnx2_reg_wr_ind(bp, cpu_reg->state, cpu_reg->state_value_clear);
 
 	/* Load the Text area. */
-	offset = cpu_reg->spad_base + (fw->text_addr - cpu_reg->mips_view_base);
-	if (fw->gz_text) {
-		int j;
-
-		rc = zlib_inflate_blob(fw->text, FW_BUF_SIZE, fw->gz_text,
-				       fw->gz_text_len);
-		if (rc < 0)
-			return rc;
+	addr = be32_to_cpu(fw_entry->text.addr);
+	len = be32_to_cpu(fw_entry->text.len);
+	file_offset = be32_to_cpu(fw_entry->text.offset);
+	data = (__be32 *)(bp->mips_firmware->data + file_offset);
 
-		for (j = 0; j < (fw->text_len / 4); j++, offset += 4) {
-			bnx2_reg_wr_ind(bp, offset, le32_to_cpu(fw->text[j]));
-	        }
-	}
-
-	/* Load the Data area. */
-	offset = cpu_reg->spad_base + (fw->data_addr - cpu_reg->mips_view_base);
-	if (fw->data) {
+	offset = cpu_reg->spad_base + (addr - cpu_reg->mips_view_base);
+	if (len) {
 		int j;
 
-		for (j = 0; j < (fw->data_len / 4); j++, offset += 4) {
-			bnx2_reg_wr_ind(bp, offset, fw->data[j]);
-		}
+		for (j = 0; j < (len / 4); j++, offset += 4)
+			bnx2_reg_wr_ind(bp, offset, be32_to_cpu(data[j]));
 	}
 
-	/* Load the SBSS area. */
-	offset = cpu_reg->spad_base + (fw->sbss_addr - cpu_reg->mips_view_base);
-	if (fw->sbss_len) {
-		int j;
-
-		for (j = 0; j < (fw->sbss_len / 4); j++, offset += 4) {
-			bnx2_reg_wr_ind(bp, offset, 0);
-		}
-	}
+	/* Load the Data area. */
+	addr = be32_to_cpu(fw_entry->data.addr);
+	len = be32_to_cpu(fw_entry->data.len);
+	file_offset = be32_to_cpu(fw_entry->data.offset);
+	data = (__be32 *)(bp->mips_firmware->data + file_offset);
 
-	/* Load the BSS area. */
-	offset = cpu_reg->spad_base + (fw->bss_addr - cpu_reg->mips_view_base);
-	if (fw->bss_len) {
+	offset = cpu_reg->spad_base + (addr - cpu_reg->mips_view_base);
+	if (len) {
 		int j;
 
-		for (j = 0; j < (fw->bss_len/4); j++, offset += 4) {
-			bnx2_reg_wr_ind(bp, offset, 0);
-		}
+		for (j = 0; j < (len / 4); j++, offset += 4)
+			bnx2_reg_wr_ind(bp, offset, be32_to_cpu(data[j]));
 	}
 
 	/* Load the Read-Only area. */
-	offset = cpu_reg->spad_base +
-		(fw->rodata_addr - cpu_reg->mips_view_base);
-	if (fw->rodata) {
+	addr = be32_to_cpu(fw_entry->rodata.addr);
+	len = be32_to_cpu(fw_entry->rodata.len);
+	file_offset = be32_to_cpu(fw_entry->rodata.offset);
+	data = (__be32 *)(bp->mips_firmware->data + file_offset);
+
+	offset = cpu_reg->spad_base + (addr - cpu_reg->mips_view_base);
+	if (len) {
 		int j;
 
-		for (j = 0; j < (fw->rodata_len / 4); j++, offset += 4) {
-			bnx2_reg_wr_ind(bp, offset, fw->rodata[j]);
-		}
+		for (j = 0; j < (len / 4); j++, offset += 4)
+			bnx2_reg_wr_ind(bp, offset, be32_to_cpu(data[j]));
 	}
 
 	/* Clear the pre-fetch instruction. */
 	bnx2_reg_wr_ind(bp, cpu_reg->inst, 0);
-	bnx2_reg_wr_ind(bp, cpu_reg->pc, fw->start_addr);
+
+	val = be32_to_cpu(fw_entry->start_addr);
+	bnx2_reg_wr_ind(bp, cpu_reg->pc, val);
 
 	/* Start the CPU. */
 	val = bnx2_reg_rd_ind(bp, cpu_reg->mode);
@@ -3515,95 +3622,40 @@ load_cpu_fw(struct bnx2 *bp, const struct cpu_reg *cpu_reg, struct fw_info *fw)
 static int
 bnx2_init_cpus(struct bnx2 *bp)
 {
-	struct fw_info *fw;
-	int rc, rv2p_len;
-	void *text, *rv2p;
+	const struct bnx2_mips_fw_file *mips_fw =
+		(const struct bnx2_mips_fw_file *) bp->mips_firmware->data;
+	const struct bnx2_rv2p_fw_file *rv2p_fw =
+		(const struct bnx2_rv2p_fw_file *) bp->rv2p_firmware->data;
+	int rc;
 
 	/* Initialize the RV2P processor. */
-	text = vmalloc(FW_BUF_SIZE);
-	if (!text)
-		return -ENOMEM;
-	if (CHIP_NUM(bp) == CHIP_NUM_5709) {
-		rv2p = bnx2_xi_rv2p_proc1;
-		rv2p_len = sizeof(bnx2_xi_rv2p_proc1);
-	} else {
-		rv2p = bnx2_rv2p_proc1;
-		rv2p_len = sizeof(bnx2_rv2p_proc1);
-	}
-	rc = zlib_inflate_blob(text, FW_BUF_SIZE, rv2p, rv2p_len);
-	if (rc < 0)
-		goto init_cpu_err;
-
-	load_rv2p_fw(bp, text, rc /* == len */, RV2P_PROC1);
-
-	if (CHIP_NUM(bp) == CHIP_NUM_5709) {
-		rv2p = bnx2_xi_rv2p_proc2;
-		rv2p_len = sizeof(bnx2_xi_rv2p_proc2);
-	} else {
-		rv2p = bnx2_rv2p_proc2;
-		rv2p_len = sizeof(bnx2_rv2p_proc2);
-	}
-	rc = zlib_inflate_blob(text, FW_BUF_SIZE, rv2p, rv2p_len);
-	if (rc < 0)
-		goto init_cpu_err;
-
-	load_rv2p_fw(bp, text, rc /* == len */, RV2P_PROC2);
+	load_rv2p_fw(bp, RV2P_PROC1, &rv2p_fw->proc1);
+	load_rv2p_fw(bp, RV2P_PROC2, &rv2p_fw->proc2);
 
 	/* Initialize the RX Processor. */
-	if (CHIP_NUM(bp) == CHIP_NUM_5709)
-		fw = &bnx2_rxp_fw_09;
-	else
-		fw = &bnx2_rxp_fw_06;
-
-	fw->text = text;
-	rc = load_cpu_fw(bp, &cpu_reg_rxp, fw);
+	rc = load_cpu_fw(bp, &cpu_reg_rxp, &mips_fw->rxp);
 	if (rc)
 		goto init_cpu_err;
 
 	/* Initialize the TX Processor. */
-	if (CHIP_NUM(bp) == CHIP_NUM_5709)
-		fw = &bnx2_txp_fw_09;
-	else
-		fw = &bnx2_txp_fw_06;
-
-	fw->text = text;
-	rc = load_cpu_fw(bp, &cpu_reg_txp, fw);
+	rc = load_cpu_fw(bp, &cpu_reg_txp, &mips_fw->txp);
 	if (rc)
 		goto init_cpu_err;
 
 	/* Initialize the TX Patch-up Processor. */
-	if (CHIP_NUM(bp) == CHIP_NUM_5709)
-		fw = &bnx2_tpat_fw_09;
-	else
-		fw = &bnx2_tpat_fw_06;
-
-	fw->text = text;
-	rc = load_cpu_fw(bp, &cpu_reg_tpat, fw);
+	rc = load_cpu_fw(bp, &cpu_reg_tpat, &mips_fw->tpat);
 	if (rc)
 		goto init_cpu_err;
 
 	/* Initialize the Completion Processor. */
-	if (CHIP_NUM(bp) == CHIP_NUM_5709)
-		fw = &bnx2_com_fw_09;
-	else
-		fw = &bnx2_com_fw_06;
-
-	fw->text = text;
-	rc = load_cpu_fw(bp, &cpu_reg_com, fw);
+	rc = load_cpu_fw(bp, &cpu_reg_com, &mips_fw->com);
 	if (rc)
 		goto init_cpu_err;
 
 	/* Initialize the Command Processor. */
-	if (CHIP_NUM(bp) == CHIP_NUM_5709)
-		fw = &bnx2_cp_fw_09;
-	else
-		fw = &bnx2_cp_fw_06;
-
-	fw->text = text;
-	rc = load_cpu_fw(bp, &cpu_reg_cp, fw);
+	rc = load_cpu_fw(bp, &cpu_reg_cp, &mips_fw->cp);
 
 init_cpu_err:
-	vfree(text);
 	return rc;
 }
 
@@ -7807,6 +7859,10 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	pci_set_drvdata(pdev, dev);
 
+	rc = bnx2_request_firmware(bp);
+	if (rc)
+		goto error;
+
 	memcpy(dev->dev_addr, bp->mac_addr, 6);
 	memcpy(dev->perm_addr, bp->mac_addr, 6);
 
@@ -7823,13 +7879,7 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	if ((rc = register_netdev(dev))) {
 		dev_err(&pdev->dev, "Cannot register net device\n");
-		if (bp->regview)
-			iounmap(bp->regview);
-		pci_release_regions(pdev);
-		pci_disable_device(pdev);
-		pci_set_drvdata(pdev, NULL);
-		free_netdev(dev);
-		return rc;
+		goto error;
 	}
 
 	printk(KERN_INFO "%s: %s (%c%d) %s found at mem %lx, "
@@ -7843,6 +7893,20 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		bp->pdev->irq, dev->dev_addr);
 
 	return 0;
+
+error:
+	if (bp->mips_firmware)
+		release_firmware(bp->mips_firmware);
+	if (bp->rv2p_firmware)
+		release_firmware(bp->rv2p_firmware);
+
+	if (bp->regview)
+		iounmap(bp->regview);
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+	pci_set_drvdata(pdev, NULL);
+	free_netdev(dev);
+	return rc;
 }
 
 static void __devexit
@@ -7855,6 +7919,11 @@ bnx2_remove_one(struct pci_dev *pdev)
 
 	unregister_netdev(dev);
 
+	if (bp->mips_firmware)
+		release_firmware(bp->mips_firmware);
+	if (bp->rv2p_firmware)
+		release_firmware(bp->rv2p_firmware);
+
 	if (bp->regview)
 		iounmap(bp->regview);
 
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index 704cbbcbf97..5b570e17c83 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -6885,6 +6885,8 @@ struct bnx2 {
 
 	u32			idle_chk_status_idx;
 
+	const struct firmware	*mips_firmware;
+	const struct firmware	*rv2p_firmware;
 };
 
 #define REG_RD(bp, offset)					\
@@ -6915,44 +6917,41 @@ struct cpu_reg {
 	u32 mips_view_base;
 };
 
-struct fw_info {
-	const u32 ver_major;
-	const u32 ver_minor;
-	const u32 ver_fix;
-
-	const u32 start_addr;
-
-	/* Text section. */
-	const u32 text_addr;
-	const u32 text_len;
-	const u32 text_index;
-	__le32 *text;
-	u8 *gz_text;
-	const u32 gz_text_len;
-
-	/* Data section. */
-	const u32 data_addr;
-	const u32 data_len;
-	const u32 data_index;
-	const u32 *data;
-
-	/* SBSS section. */
-	const u32 sbss_a