Merge tag 'for-linus-20121009' of git://git.infradead.org/mtd-2.6

Pull MTD updates from David Woodhouse:

 - Disable broken mtdchar mmap() on MMU systems
 - Additional ECC tests for NAND flash, and some test cleanups
 - New NAND and SPI chip support
 - Fixes/cleanup for SH FLCTL NAND controller driver
 - Improved hardware support for GPMI NAND controller
 - Conversions to device-tree support for various drivers
 - Removal of obsolete drivers (sbc8xxx, bcmring, etc.)
 - New LPC32xx drivers for MLC and SLC NAND
 - Further cleanup of NAND OOB/ECC handling
 - UAPI cleanup merge from David Howells (just moving files, since MTD
   headers were sorted out long ago to separate user-visible from kernel
   bits)

* tag 'for-linus-20121009' of git://git.infradead.org/mtd-2.6: (168 commits)
  mtd: Disable mtdchar mmap on MMU systems
  UAPI: (Scripted) Disintegrate include/mtd
  mtd: nand: detect Samsung K9GBG08U0A, K9GAG08U0F ID
  mtd: nand: decode Hynix MLC, 6-byte ID length
  mtd: nand: increase max OOB size to 640
  mtd: nand: add generic READ ID length calculation functions
  mtd: nand: split simple ID decode into its own function
  mtd: nand: split extended ID decoding into its own function
  mtd: nand: split BB marker options decoding into its own function
  mtd: nand: remove redundant ID read
  mtd: nand: remove unnecessary variable
  mtd: docg4: add missing HAS_IOMEM dependency
  mtd: gpmi: initialize the timing registers only one time
  mtd: gpmi: add EDO feature for imx6q
  mtd: gpmi: do not set the default values for the extra clocks
  mtd: gpmi: simplify the DLL setting code
  mtd: gpmi: add a new field for HW_GPMI_CTRL1
  mtd: gpmi: do not get the clock frequency in gpmi_begin()
  mtd: gpmi: add a new field for HW_GPMI_TIMING1
  mtd: add helpers to get the supportted ONFI timing mode
  ...

119 files changed, 6361 insertions, 3239 deletions

diff --git a/Documentation/DocBook/mtdnand.tmpl b/Documentation/DocBook/mtdnand.tmpl
index e0aedb7a782..fe122d6e686 100644
--- a/Documentation/DocBook/mtdnand.tmpl
+++ b/Documentation/DocBook/mtdnand.tmpl
@@ -1216,8 +1216,6 @@ in this page</entry>
 #define	NAND_BBT_LASTBLOCK	0x00000010
 /* The bbt is at the given page, else we must scan for the bbt */
 #define NAND_BBT_ABSPAGE	0x00000020
-/* The bbt is at the given page, else we must scan for the bbt */
-#define NAND_BBT_SEARCH		0x00000040
 /* bbt is stored per chip on multichip devices */
 #define NAND_BBT_PERCHIP	0x00000080
 /* bbt has a version counter at offset veroffs */
diff --git a/Documentation/devicetree/bindings/arm/davinci/nand.txt b/Documentation/devicetree/bindings/arm/davinci/nand.txt
new file mode 100644
index 00000000000..e37241f1fdd
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/davinci/nand.txt
@@ -0,0 +1,51 @@
+* Texas Instruments Davinci NAND
+
+This file provides information, what the device node for the
+davinci nand interface contain.
+
+Required properties:
+- compatible: "ti,davinci-nand";
+- reg : contain 2 offset/length values:
+        - offset and length for the access window
+        - offset and length for accessing the aemif control registers
+- ti,davinci-chipselect: Indicates on the davinci_nand driver which
+                         chipselect is used for accessing the nand.
+
+Recommended properties :
+- ti,davinci-mask-ale: mask for ale
+- ti,davinci-mask-cle: mask for cle
+- ti,davinci-mask-chipsel: mask for chipselect
+- ti,davinci-ecc-mode: ECC mode valid values for davinci driver:
+		- "none"
+		- "soft"
+		- "hw"
+- ti,davinci-ecc-bits: used ECC bits, currently supported 1 or 4.
+- ti,davinci-nand-buswidth: buswidth 8 or 16
+- ti,davinci-nand-use-bbt: use flash based bad block table support.
+
+Example (enbw_cmc board):
+aemif@60000000 {
+	compatible = "ti,davinci-aemif";
+	#address-cells = <2>;
+	#size-cells = <1>;
+	reg = <0x68000000 0x80000>;
+	ranges = <2 0 0x60000000 0x02000000
+		  3 0 0x62000000 0x02000000
+		  4 0 0x64000000 0x02000000
+		  5 0 0x66000000 0x02000000
+		  6 0 0x68000000 0x02000000>;
+	nand@3,0 {
+		compatible = "ti,davinci-nand";
+		reg = <3 0x0 0x807ff
+			6 0x0 0x8000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ti,davinci-chipselect = <1>;
+		ti,davinci-mask-ale = <0>;
+		ti,davinci-mask-cle = <0>;
+		ti,davinci-mask-chipsel = <0>;
+		ti,davinci-ecc-mode = "hw";
+		ti,davinci-ecc-bits = <4>;
+		ti,davinci-nand-use-bbt;
+	};
+};
diff --git a/Documentation/devicetree/bindings/mtd/atmel-nand.txt b/Documentation/devicetree/bindings/mtd/atmel-nand.txt
index a20069502f5..d555421ea49 100644
--- a/Documentation/devicetree/bindings/mtd/atmel-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/atmel-nand.txt
@@ -3,7 +3,9 @@ Atmel NAND flash
 Required properties:
 - compatible : "atmel,at91rm9200-nand".
 - reg : should specify localbus address and size used for the chip,
-	and if availlable the ECC.
+	and hardware ECC controller if available.
+	If the hardware ECC is PMECC, it should contain address and size for
+	PMECC, PMECC Error Location controller and ROM which has lookup tables.
 - atmel,nand-addr-offset : offset for the address latch.
 - atmel,nand-cmd-offset : offset for the command latch.