Merge branch 'for-torvalds' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson

* 'for-torvalds' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: mach-ux500: voltage domain regulators for DB8500 cpufreq: make DB8500 cpufreq driver compile cpufreq: update DB8500 cpufreq driver mach-ux500: move CPUfreq driver to cpufreq subsystem mfd: add DB5500 PRCMU driver mfd: update DB8500 PRCMU driver mach-ux500: move the DB8500 PRCMU driver to MFD mach-ux500: make PRCMU base address dynamic mach-ux500: rename PRCMU driver per SoC mach-ux500: update ASIC version detection mach-ux500: update SoC and board IRQ handling mach-ux500: update the DB5500 register file mach-ux500: update the DB8500 register file
author: Linus Torvalds <torvalds@linux-foundation.org> 2011-05-25 15:35:03 -0700
committer: Linus Torvalds <torvalds@linux-foundation.org> 2011-05-25 15:35:03 -0700
commit: ad363e0916423b2e6cdfcdc30ae707ec709f0a65 (patch)
tree: c47cc9062f7adc0ceb27f634b63b8548b733f01c
parent: ed0795aa12129df9f3d2cc81ee579a9e54e12885 (diff)
parent: 1032fbfd792f2b384ac16a63993b8fae5eea9083 (diff)
33 files changed, 4755 insertions, 707 deletions
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 58626013aa3..54429d01595 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -12,9 +12,12 @@ menu "Ux500 SoC"
 
 config UX500_SOC_DB5500
 	bool "DB5500"
+	select MFD_DB5500_PRCMU
 
 config UX500_SOC_DB8500
 	bool "DB8500"
+	select MFD_DB8500_PRCMU
+	select REGULATOR_DB8500_PRCMU
 
 endmenu
 
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index b549a8fb423..1694916e682 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -5,7 +5,7 @@
 obj-y				:= clock.o cpu.o devices.o devices-common.o \
 				   id.o usb.o
 obj-$(CONFIG_UX500_SOC_DB5500)	+= cpu-db5500.o dma-db5500.o
-obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o devices-db8500.o prcmu.o
+obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o devices-db8500.o
 obj-$(CONFIG_MACH_U8500)	+= board-mop500.o board-mop500-sdi.o \
 				board-mop500-regulators.o \
 				board-mop500-uib.o board-mop500-stuib.o \
@@ -17,4 +17,4 @@ obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
 obj-$(CONFIG_LOCAL_TIMERS)	+= localtimer.o
 obj-$(CONFIG_U5500_MODEM_IRQ)	+= modem-irq-db5500.o
 obj-$(CONFIG_U5500_MBOX)	+= mbox-db5500.o
-obj-$(CONFIG_CPU_FREQ)		+= cpufreq.o
+
diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c
index c9dc2eff3cb..c01bc19e3c5 100644
--- a/arch/arm/mach-ux500/cpu-db5500.c
+++ b/arch/arm/mach-ux500/cpu-db5500.c
@@ -188,6 +188,8 @@ void __init u5500_map_io(void)
 	ux500_map_io();
 
 	iotable_init(u5500_io_desc, ARRAY_SIZE(u5500_io_desc));
+
+	_PRCMU_BASE = __io_address(U5500_PRCMU_BASE);
 }
 
 static int usb_db5500_rx_dma_cfg[] = {
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 516126cb357..c3c417656bd 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -87,6 +87,8 @@ void __init u8500_map_io(void)
 		iotable_init(u8500_v1_io_desc, ARRAY_SIZE(u8500_v1_io_desc));
 	else if (cpu_is_u8500v2())
 		iotable_init(u8500_v2_io_desc, ARRAY_SIZE(u8500_v2_io_desc));
+
+	_PRCMU_BASE = __io_address(U8500_PRCMU_BASE);
 }
 
 static struct resource db8500_pmu_resources[] = {
@@ -129,9 +131,14 @@ static struct platform_device db8500_pmu_device = {
 	.dev.platform_data	= &db8500_pmu_platdata,
 };
 
+static struct platform_device db8500_prcmu_device = {
+	.name			= "db8500-prcmu",
+};
+
 static struct platform_device *platform_devs[] __initdata = {
 	&u8500_dma40_device,
 	&db8500_pmu_device,
+	&db8500_prcmu_device,
 };
 
 static resource_size_t __initdata db8500_gpio_base[] = {
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index 5a43107c623..1da23bb87c1 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -8,6 +8,8 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/clk.h>
+#include <linux/mfd/db8500-prcmu.h>
+#include <linux/mfd/db5500-prcmu.h>
 
 #include <asm/cacheflush.h>
 #include <asm/hardware/cache-l2x0.h>
@@ -19,10 +21,11 @@
 #include <mach/hardware.h>
 #include <mach/setup.h>
 #include <mach/devices.h>
-#include <mach/prcmu.h>
 
 #include "clock.h"
 
+void __iomem *_PRCMU_BASE;
+
 #ifdef CONFIG_CACHE_L2X0
 static void __iomem *l2x0_base;
 #endif
@@ -47,6 +50,8 @@ void __init ux500_init_irq(void)
 	 * Init clocks here so that they are available for system timer
 	 * initialization.
 	 */
+	if (cpu_is_u5500())
+		db5500_prcmu_early_init();
 	if (cpu_is_u8500())
 		prcmu_early_init();
 	clk_init();
diff --git a/arch/arm/mach-ux500/cpufreq.c b/arch/arm/mach-ux500/cpufreq.c
deleted file mode 100644
index 5c5b747f134..00000000000
--- a/arch/arm/mach-ux500/cpufreq.c
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
- * CPU frequency scaling for u8500
- * Inspired by linux/arch/arm/mach-davinci/cpufreq.c
- *
- * Copyright (C) STMicroelectronics 2009
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License Terms: GNU General Public License v2
- *
- * Author: Sundar Iyer <sundar.iyer@stericsson.com>
- * Author: Martin Persson <martin.persson@stericsson.com>
- * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/kernel.h>
-#include <linux/cpufreq.h>
-#include <linux/delay.h>
-
-#include <mach/hardware.h>
-#include <mach/prcmu.h>
-#include <mach/prcmu-defs.h>
-
-#define DRIVER_NAME "cpufreq-u8500"
-#define CPUFREQ_NAME "u8500"
-
-static struct device *dev;
-
-static struct cpufreq_frequency_table freq_table[] = {
-	[0] = {
-		.index = 0,
-		.frequency = 200000,
-	},
-	[1] = {
-		.index = 1,
-		.frequency = 300000,
-	},
-	[2] = {
-		.index = 2,
-		.frequency = 600000,
-	},
-	[3] = {
-		/* Used for CPU_OPP_MAX, if available */
-		.index = 3,
-		.frequency = CPUFREQ_TABLE_END,
-	},
-	[4] = {
-		.index = 4,
-		.frequency = CPUFREQ_TABLE_END,
-	},
-};
-
-static enum prcmu_cpu_opp index2opp[] = {
-	CPU_OPP_EXT_CLK,
-	CPU_OPP_50,
-	CPU_OPP_100,
-	CPU_OPP_MAX
-};
-
-static int u8500_cpufreq_verify_speed(struct cpufreq_policy *policy)
-{
-	return cpufreq_frequency_table_verify(policy, freq_table);
-}
-
-static int u8500_cpufreq_target(struct cpufreq_policy *policy,
-				unsigned int target_freq,
-				unsigned int relation)
-{
-	struct cpufreq_freqs freqs;
-	unsigned int index;
-	int ret = 0;
-
-	/*
-	 * Ensure desired rate is within allowed range.  Some govenors
-	 * (ondemand) will just pass target_freq=0 to get the minimum.
-	 */
-	if (target_freq < policy->cpuinfo.min_freq)
-		target_freq = policy->cpuinfo.min_freq;
-	if (target_freq > policy->cpuinfo.max_freq)
-		target_freq = policy->cpuinfo.max_freq;
-
-	ret = cpufreq_frequency_table_target(policy, freq_table,
-					     target_freq, relation, &index);
-	if (ret < 0) {
-		dev_err(dev, "Could not look up next frequency\n");
-		return ret;
-	}
-
-	freqs.old = policy->cur;
-	freqs.new = freq_table[index].frequency;
-	freqs.cpu = policy->cpu;
-
-	if (freqs.old == freqs.new) {
-		dev_dbg(dev, "Current and target frequencies are equal\n");
-		return 0;
-	}
-
-	dev_dbg(dev, "transition: %u --> %u\n", freqs.old, freqs.new);
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-	ret = prcmu_set_cpu_opp(index2opp[index]);
-	if (ret < 0) {
-		dev_err(dev, "Failed to set OPP level\n");
-		return ret;
-	}
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-	return ret;
-}
-
-static unsigned int u8500_cpufreq_getspeed(unsigned int cpu)
-{
-	int i;
-
-	for (i = 0; prcmu_get_cpu_opp() != index2opp[i]; i++)
-		;
-	return freq_table[i].frequency;
-}
-
-static int __cpuinit u8500_cpu_init(struct cpufreq_policy *policy)
-{
-	int res;
-
-	BUILD_BUG_ON(ARRAY_SIZE(index2opp) + 1 != ARRAY_SIZE(freq_table));
-
-	if (cpu_is_u8500v2()) {
-		freq_table[1].frequency = 400000;
-		freq_table[2].frequency = 800000;
-		if (prcmu_has_arm_maxopp())
-			freq_table[3].frequency = 1000000;
-	}
-
-	/* get policy fields based on the table */
-	res = cpufreq_frequency_table_cpuinfo(policy, freq_table);
-	if (!res)
-		cpufreq_frequency_table_get_attr(freq_table, policy->cpu);
-	else {
-		dev_err(dev, "u8500-cpufreq : Failed to read policy table\n");
-		return res;
-	}
-
-	policy->min = policy->cpuinfo.min_freq;
-	policy->max = policy->cpuinfo.max_freq;
-	policy->cur = u8500_cpufreq_getspeed(policy->cpu);
-	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
-
-	/*
-	 * FIXME : Need to take time measurement across the target()
-	 *	   function with no/some/all drivers in the notification
-	 *	   list.
-	 */
-	policy->cpuinfo.transition_latency = 200 * 1000; /* in ns */
-
-	/* policy sharing between dual CPUs */
-	cpumask_copy(policy->cpus, &cpu_present_map);
-
-	policy->shared_type = CPUFREQ_SHARED_TYPE_ALL;
-
-	return res;
-}
-
-static struct freq_attr *u8500_cpufreq_attr[] = {
-	&cpufreq_freq_attr_scaling_available_freqs,
-	NULL,
-};
-static int u8500_cpu_exit(struct cpufreq_policy *policy)
-{
-	cpufreq_frequency_table_put_attr(policy->cpu);
-	return 0;
-}
-
-static struct cpufreq_driver u8500_driver = {
-	.owner = THIS_MODULE,
-	.flags = CPUFREQ_STICKY,
-	.verify = u8500_cpufreq_verify_speed,
-	.target = u8500_cpufreq_target,
-	.get = u8500_cpufreq_getspeed,
-	.init = u8500_cpu_init,
-	.exit = u8500_cpu_exit,
-	.name = CPUFREQ_NAME,
-	.attr = u8500_cpufreq_attr,
-};
-
-static int __init u8500_cpufreq_probe(struct platform_device *pdev)
-{
-	dev = &pdev->dev;
-	return cpufreq_register_driver(&u8500_driver);
-}
-
-static int __exit u8500_cpufreq_remove(struct platform_device *pdev)
-{
-	return cpufreq_unregister_driver(&u8500_driver);
-}
-
-static struct platform_driver u8500_cpufreq_driver = {
-	.driver = {
-		.name	 = DRIVER_NAME,
-		.owner	 = THIS_MODULE,
-	},
-	.remove = __exit_p(u8500_cpufreq_remove),
-};
-
-static int __init u8500_cpufreq_init(void)
-{
-	return platform_driver_probe(&u8500_cpufreq_driver,
-				     &u8500_cpufreq_probe);
-}
-
-device_initcall(u8500_cpufreq_init);
diff --git a/arch/arm/mach-ux500/include/mach/db5500-regs.h b/arch/arm/mach-ux500/include/mach/db5500-regs.h
index bd88c1e7406..6ad98329410 100644
--- a/arch/arm/mach-ux500/include/mach/db5500-regs.h
+++ b/arch/arm/mach-ux500/include/mach/db5500-regs.h
@@ -17,6 +17,8 @@
 #define U5500_GIC_DIST_BASE	0xA0411000
 #define U5500_GIC_CPU_BASE	0xA0410100
 #define U5500_DMA_BASE		0x90030000
+#define U5500_STM_BASE		0x90020000
+#define U5500_STM_REG_BASE	(U5500_STM_BASE + 0xF000)
 #define U5500_MCDE_BASE		0xA0400000
 #define U5500_MODEM_BASE	0xB0000000
 #define U5500_L2CC_BASE		0xA0412000
@@ -29,7 +31,9 @@
 #define U5500_NAND0_BASE	0x60000000
 #define U5500_NAND1_BASE	0x70000000
 #define U5500_TWD_BASE		0xa0410600
+#define U5500_ICN_BASE		0xA0040000
 #define U5500_B2R2_BASE		0xa0200000
+#define U5500_BOOT_ROM_BASE	0x90000000
 
 #define U5500_FSMC_BASE		(U5500_PER1_BASE + 0x0000)
 #define U5500_SDI0_BASE		(U5500_PER1_BASE + 0x1000)
@@ -60,6 +64,7 @@
 #define U5500_MSP1_BASE		(U5500_PER4_BASE + 0x9000)
 #define U5500_GPIO2_BASE	(U5500_PER4_BASE + 0xA000)
 #define U5500_CDETECT_BASE	(U5500_PER4_BASE + 0xF000)
+#define U5500_PRCMU_TCDM_BASE	(U5500_PER4_BASE + 0x18000)
 
 #define U5500_SPI0_BASE		(U5500_PER5_BASE + 0x0000)
 #define U5500_SPI1_BASE		(U5500_PER5_BASE + 0x1000)
@@ -83,7 +88,7 @@
 #define U5500_HASH0_BASE	(U5500_PER6_BASE + 0x1000)
 #define U5500_HASH1_BASE	(U5500_PER6_BASE + 0x2000)
 #define U5500_PKA_BASE		(U5500_PER6_BASE + 0x4000)
-#define U5500_PKAM_BASE		(U5500_PER6_BASE + 0x5000)
+#define U5500_PKAM_BASE		(U5500_PER6_BASE + 0x5100)
 #define U5500_MTU0_BASE		(U5500_PER6_BASE + 0x6000)
 #define U5500_MTU1_BASE		(U5500_PER6_BASE + 0x7000)
 #define U5500_CR_BASE		(U5500_PER6_BASE + 0x8000)
@@ -114,8 +119,19 @@
 #define U5500_MBOX2_LOCAL_START	(U5500_MBOX_BASE + 0x20)
 #define U5500_MBOX2_LOCAL_END	(U5500_MBOX_BASE + 0x3F)
 
-#define U5500_ESRAM_BASE		0x40000000
+#define U5500_ACCCON_BASE_SEC	(0xBFFF0000)
+#define U5500_ACCCON_BASE		(0xBFFF1000)
+#define U5500_ACCCON_CPUVEC_RESET_ADDR_OFFSET (0x00000020)
+#define U5500_ACCCON_ACC_CPU_CTRL_OFFSET (0x000000BC)
+
+#define U5500_ESRAM_BASE	        0x40000000
 #define U5500_ESRAM_DMA_LCPA_OFFSET	0x10000
 #define U5500_DMA_LCPA_BASE    (U5500_ESRAM_BASE + U5500_ESRAM_DMA_LCPA_OFFSET)
 
+#define U5500_MCDE_SIZE		0x1000
+#define U5500_DSI_LINK_SIZE	0x1000
+#define U5500_DSI_LINK_COUNT	0x2
+#define U5500_DSI_LINK1_BASE	(U5500_MCDE_BASE + U5500_MCDE_SIZE)
+#define U5500_DSI_LINK2_BASE	(U5500_DSI_LINK1_BASE + U5500_DSI_LINK_SIZE)
+
 #endif
diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h
index 16647b25537..049997109cf 100644
--- a/arch/arm/mach-ux500/include/mach/db8500-regs.h
+++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h
@@ -15,8 +15,13 @@
 #define U8500_ESRAM_BANK2	(U8500_ESRAM_BANK1 + U8500_ESRAM_BANK_SIZE)
 #define U8500_ESRAM_BANK3	(U8500_ESRAM_BANK2 + U8500_ESRAM_BANK_SIZE)
 #define U8500_ESRAM_BANK4	(U8500_ESRAM_BANK3 + U8500_ESRAM_BANK_SIZE)
-/* Use bank 4 for DMA LCPA */
-#define U8500_DMA_LCPA_BASE	U8500_ESRAM_BANK4
+/*
+ * on V1 DMA uses 4KB for logical parameters position is right after the 64KB
+ * reserved for security
+ */
+#define U8500_ESRAM_DMA_LCPA_OFFSET     0x10000
+
+#define U8500_DMA_LCPA_BASE    (U8500_ESRAM_BANK0 + U8500_ESRAM_DMA_LCPA_OFFSET)
 #define U8500_DMA_LCPA_BASE_ED	(U8500_ESRAM_BANK4 + 0x4000)
 
 #define U8500_PER3_BASE		0x80000000
@@ -27,9 +32,12 @@
 #define U8500_B2R2_BASE		0x80130000
 #define U8500_HSEM_BASE		0x80140000
 #define U8500_PER4_BASE		0x80150000
+#define U8500_TPIU_BASE		0x80190000
 #define U8500_ICN_BASE		0x81000000
 
 #define U8500_BOOT_ROM_BASE	0x90000000
+/* ASIC ID is at 0xbf4 offset within this region */
+#define U8500_ASIC_ID_BASE	0x9001D000
 
 #define U8500_PER6_BASE		0xa03c0000
 #define U8500_PER5_BASE		0xa03e0000
@@ -70,13 +78,15 @@
 
 /* per6 base addresses */
 #define U8500_RNG_BASE		(U8500_PER6_BASE + 0x0000)
-#define U8500_PKA_BASE		(U8500_PER6_BASE + 0x1000)
-#define U8500_PKAM_BASE		(U8500_PER6_BASE + 0x2000)
+#define U8500_HASH0_BASE        (U8500_PER6_BASE + 0x1000)
+#define U8500_HASH1_BASE        (U8500_PER6_BASE + 0x2000)
+#define U8500_PKA_BASE		(U8500_PER6_BASE + 0x4000)
+#define U8500_PKAM_BASE		(U8500_PER6_BASE + 0x5100)
 #define U8500_MTU0_BASE		(U8500_PER6_BASE + 0x6000) /* v1 */
 #define U8500_MTU1_BASE		(U8500_PER6_BASE + 0x7000) /* v1 */
 #define U8500_CR_BASE		(U8500_PER6_BASE + 0x8000) /* v1 */
-#define U8500_CRYPTO0_BASE	(U8500_PER6_BASE + 0xa000)
-#define U8500_CRYPTO1_BASE	(U8500_PER6_BASE + 0xb000)
+#define U8500_CRYP0_BASE	(U8500_PER6_BASE + 0xa000)
+#define U8500_CRYP1_BASE	(U8500_PER6_BASE + 0xb000)
 #define U8500_CLKRST6_BASE	(U8500_PER6_BASE + 0xf000)
 
 /* per5 base addresses */
@@ -93,7 +103,8 @@
 #define U8500_DMC_BASE		(U8500_PER4_BASE + 0x06000)
 #define U8500_PRCMU_BASE	(U8500_PER4_BASE + 0x07000)
 #define U8500_PRCMU_TCDM_BASE_V1 (U8500_PER4_BASE + 0x0f000)
-#define U8500_PRCMU_TCDM_BASE   (U8500_PER4_BASE + 0x68000)
+#define U8500_PRCMU_TCDM_BASE	(U8500_PER4_BASE + 0x68000)
+#define U8500_PRCMU_TCPM_BASE   (U8500_PER4_BASE + 0x60000)
 
 /* per3 base addresses */
 #define U8500_FSMC_BASE		(U8500_PER3_BASE + 0x0000)
@@ -124,6 +135,7 @@
 #define U8500_I2C1_BASE		(U8500_PER1_BASE + 0x2000)
 #define U8500_MSP0_BASE		(U8500_PER1_BASE + 0x3000)
 #define U8500_MSP1_BASE		(U8500_PER1_BASE + 0x4000)
+#define U8500_MSP3_BASE		(U8500_PER1_BASE + 0x5000)
 #define U8500_SDI0_BASE		(U8500_PER1_BASE + 0x6000)
 #define U8500_I2C2_BASE		(U8500_PER1_BASE + 0x8000)
 #define U8500_SPI3_BASE		(U8500_PER1_BASE + 0x9000)
@@ -143,4 +155,15 @@
 #define U8500_GPIOBANK7_BASE	(U8500_GPIO2_BASE + 0x80)
 #define U8500_GPIOBANK8_BASE	U8500_GPIO3_BASE
 
+#define U8500_MCDE_SIZE		0x1000
+#define U8500_DSI_LINK_SIZE	0x1000
+#define U8500_DSI_LINK1_BASE	(U8500_MCDE_BASE + U8500_MCDE_SIZE)
+#define U8500_DSI_LINK2_BASE	(U8500_DSI_LINK1_BASE + U8500_DSI_LINK_SIZE)
+#define U8500_DSI_LINK3_BASE	(U8500_DSI_LINK2_BASE + U8500_DSI_LINK_SIZE)
+#define U8500_DSI_LINK_COUNT	0x3
+
+/* Modem and APE physical addresses */
+#define U8500_MODEM_BASE	0xe000000
+#define U8500_APE_BASE		0x6000000
+
 #endif
diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h
index bf63f2631ba..2c6f71049f2 100644
--- a/arch/arm/mach-ux500/include/mach/hardware.h
+++ b/arch/arm/mach-ux500/include/mach/hardware.h
@@ -35,6 +35,7 @@
 #ifndef __ASSEMBLY__
 
 #include <mach/id.h>
+extern void __iomem *_PRCMU_BASE;
 
 #define ARRAY_AND_SIZE(x)	(x), ARRAY_SIZE(x)
 
diff --git a/arch/arm/mach-ux500/include/mach/id.h b/arch/arm/mach-ux500/include/mach/id.h
index f1288d10b6a..02b541a37ee 100644
--- a/arch/arm/mach-ux500/include/mach/id.h
+++ b/arch/arm/mach-ux500/include/mach/id.h
@@ -75,6 +75,26 @@ static inline bool __attribute_const__ cpu_is_u8500v2(void)
 	return cpu_is_u8500() && ((dbx500_revision() & 0xf0) == 0xB0);
 }
 
+static inline bool cpu_is_u8500v20(void)
+{
+	return cpu_is_u8500() && (dbx500_revision() == 0xB0);
+}
+
+static inline bool cpu_is_u8500v21(void)
+{
+	return cpu_is_u8500() && (dbx500_revision() == 0xB1);
+}
+
+static inline bool cpu_is_u8500v20_or_later(void)
+{
+	return cpu_is_u8500() && !cpu_is_u8500v10() && !cpu_is_u8500v11();
+}
+
+static inline bool ux500_is_svp(void)
+{
+	return false;
+}
+
 #define ux500_unknown_soc()	BUG()
 
 #endif
diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
index 97ef55f8493..47969909836 100644
--- a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
+++ b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
@@ -50,6 +50,11 @@
 
 #define MOP500_IRQ_END		MOP500_NR_IRQS
 
+/*
+ * We may have several boards, but only one will run at a
+ * time, so the one with most IRQs will bump this ahead,
+ * but the IRQ_BOARD_START remains the same for either board.
+ */
 #if MOP500_IRQ_END > IRQ_BOARD_END
 #undef IRQ_BOARD_END
 #define IRQ_BOARD_END	MOP500_IRQ_END
diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-u5500.h b/arch/arm/mach-ux500/include/mach/irqs-board-u5500.h
new file mode 100644
index 00000000000..29d972c7717
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/irqs-board-u5500.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef __MACH_IRQS_BOARD_U5500_H
+#define __MACH_IRQS_BOARD_U5500_H
+
+#define AB5500_NR_IRQS		5
+#define IRQ_AB5500_BASE		IRQ_BOARD_START
+#define IRQ_AB5500_END		(IRQ_AB5500_BASE + AB5500_NR_IRQS)
+
+#define U5500_IRQ_END		IRQ_AB5500_END
+
+#if IRQ_BOARD_END < U5500_IRQ_END
+#undef IRQ_BOARD_END
+#define IRQ_BOARD_END		U5500_IRQ_END
+#endif
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/irqs-db5500.h b/arch/arm/mach-ux500/include/mach/irqs-db5500.h
index bfa123dbec3..77239776a6f 100644
--- a/arch/arm/mach-ux500/include/mach/irqs-db5500.h
+++ b/arch/arm/mach-ux500/include/mach/irqs-db5500.h
@@ -83,4 +83,31 @@
 #define IRQ_DB5500_GPIO6		(IRQ_SHPI_START + 125)
 #define IRQ_DB5500_GPIO7		(IRQ_SHPI_START + 126)
 
+#ifdef CONFIG_UX500_SOC_DB5500
+
+/*
+ * After the GPIO ones we reserve a range of IRQ:s in which virtual
+ * IRQ:s representing modem IRQ:s can be allocated
+ */
+#define IRQ_MODEM_EVENTS_BASE	IRQ_SOC_START
+#define IRQ_MODEM_EVENTS_NBR	72
+#define IRQ_MODEM_EVENTS_END	(IRQ_MODEM_EVENTS_BASE + IRQ_MODEM_EVENTS_NBR)
+
+/* List of virtual IRQ:s that are allocated from the range above */
+#define MBOX_PAIR0_VIRT_IRQ	(IRQ_MODEM_EVENTS_BASE + 43)
+#define MBOX_PAIR1_VIRT_IRQ	(IRQ_MODEM_EVENTS_BASE + 45)
+#define MBOX_PAIR2_VIRT_IRQ	(IRQ_MODEM_EVENTS_BASE + 41)
+
+/*
+ * We may have several SoCs, but only one will run at a
+ * time, so the one with most IRQs will bump this ahead,
+ * but the IRQ_SOC_START remains the same for either SoC.
+ */
+#if IRQ_SOC_END < IRQ_MODEM_EVENTS_END
+#undef IRQ_SOC_END
+#define IRQ_SOC_END		IRQ_MODEM_EVENTS_END
+#endif
+
+#endif /* CONFIG_UX500_SOC_DB5500 */
+
 #endif
diff --git a/arch/arm/mach-ux500/include/mach/irqs-db8500.h b/arch/arm/mach-ux500/include/mach/irqs-db8500.h
index 8b5d9f0a163..68bc1497460 100644
--- a/arch/arm/mach-ux500/include/mach/irqs-db8500.h
+++ b/arch/arm/mach-ux500/include/mach/irqs-db8500.h
@@ -93,4 +93,58 @@
 #define IRQ_DB8500_GPIO7		(IRQ_SHPI_START + 126)
 #define IRQ_DB8500_GPIO8		(IRQ_SHPI_START + 127)
 
+#define IRQ_CA_WAKE_REQ_ED			(IRQ_SHPI_START + 71)
+#define IRQ_AC_READ_NOTIFICATION_0_ED		(IRQ_SHPI_START + 66)
+#define IRQ_AC_READ_NOTIFICATION_1_ED		(IRQ_SHPI_START + 64)
+#define IRQ_CA_MSG_PEND_NOTIFICATION_0_ED	(IRQ_SHPI_START + 67)
+#define IRQ_CA_MSG_PEND_NOTIFICATION_1_ED	(IRQ_SHPI_START + 65)
+
+#define IRQ_CA_WAKE_REQ_V1			(IRQ_SHPI_START + 83)
+#define IRQ_AC_READ_NOTIFICATION_0_V1		(IRQ_SHPI_START + 78)
+#define IRQ_AC_READ_NOTIFICATION_1_V1		(IRQ_SHPI_START + 76)
+#define IRQ_CA_MSG_PEND_NOTIFICATION_0_V1	(IRQ_SHPI_START + 79)
+#define IRQ_CA_MSG_PEND_NOTIFICATION_1_V1	(IRQ_SHPI_START + 77)
+
+#ifdef CONFIG_UX500_SOC_DB8500
+
+/* Virtual interrupts corresponding to the PRCMU wakeups.  */
+#define IRQ_PRCMU_BASE IRQ_SOC_START
+#define NUM_PRCMU_WAKEUPS (IRQ_PRCMU_END - IRQ_PRCMU_BASE)
+
+#define IRQ_PRCMU_RTC (IRQ_PRCMU_BASE)
+#define IRQ_PRCMU_RTT0 (IRQ_PRCMU_BASE + 1)
+#define IRQ_PRCMU_RTT1 (IRQ_PRCMU_BASE + 2)
+#define IRQ_PRCMU_HSI0 (IRQ_PRCMU_BASE + 3)
+#define IRQ_PRCMU_HSI1 (IRQ_PRCMU_BASE + 4)
+#define IRQ_PRCMU_CA_WAKE (IRQ_PRCMU_BASE + 5)
+#define IRQ_PRCMU_USB (IRQ_PRCMU_BASE + 6)
+#define IRQ_PRCMU_ABB (IRQ_PRCMU_BASE + 7)
+#define IRQ_PRCMU_ABB_FIFO (IRQ_PRCMU_BASE + 8)
+#define IRQ_PRCMU_ARM (IRQ_PRCMU_BASE + 9)
+#define IRQ_PRCMU_MODEM_SW_RESET_REQ (IRQ_PRCMU_BASE + 10)
+#define IRQ_PRCMU_GPIO0 (IRQ_PRCMU_BASE + 11)
+#define IRQ_PRCMU_GPIO1 (IRQ_PRCMU_BASE + 12)
+#define IRQ_PRCMU_GPIO2 (IRQ_PRCMU_BASE + 13)
+#define IRQ_PRCMU_GPIO3 (IRQ_PRCMU_BASE + 14)
+#define IRQ_PRCMU_GPIO4 (IRQ_PRCMU_BASE + 15)
+#define IRQ_PRCMU_GPIO5 (IRQ_PRCMU_BASE + 16)
+#define IRQ_PRCMU_GPIO6 (IRQ_PRCMU_BASE + 17)
+#define IRQ_PRCMU_GPIO7 (IRQ_PRCMU_BASE + 18)
+#define IRQ_PRCMU_GPIO8 (IRQ_PRCMU_BASE + 19)
+#define IRQ_PRCMU_CA_SLEEP (IRQ_PRCMU_BASE + 20)
+#define IRQ_PRCMU_HOTMON_LOW (IRQ_PRCMU_BASE + 21)
+#define IRQ_PRCMU_HOTMON_HIGH (IRQ_PRCMU_BASE + 22)
+#define IRQ_PRCMU_END (IRQ_PRCMU_BASE + 23)
+
+/*
+ * We may have several SoCs, but only one will run at a
+ * time, so the one with most IRQs will bump this ahead,
+ * but the IRQ_SOC_START remains the same for either SoC.
+ */
+#if IRQ_SOC_END < IRQ_PRCMU_END
+#undef IRQ_SOC_END
+#define IRQ_SOC_END IRQ_PRCMU_END
+#endif
+
+#endif /* CONFIG_UX500_SOC_DB8500 */
 #endif
diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h
index ba1294c13c4..9db68d264c5 100644
--- a/arch/arm/mach-ux500/include/mach/irqs.h
+++ b/arch/arm/mach-ux500/include/mach/irqs.h
@@ -10,49 +10,47 @@
 #ifndef ASM_ARCH_IRQS_H
 #define ASM_ARCH_IRQS_H
 
-#include <mach/irqs-db5500.h>
-#include <mach/irqs-db8500.h>
+#include <mach/hardware.h>
 
-#define IRQ_LOCALTIMER                  29
-#define IRQ_LOCALWDOG                   30
+#define IRQ_LOCALTIMER			29
+#define IRQ_LOCALWDOG			30
 
 /* Shared Peripheral Interrupt (SHPI) */
 #define IRQ_SHPI_START			32
 
-/* Interrupt numbers generic for shared peripheral */
+/*
+ * MTU0 preserved for now until plat-nomadik is taught not to use it.  Don't
+ * add any other IRQs here, use the irqs-dbx500.h files.
+ */
 #define IRQ_MTU0		(IRQ_SHPI_START + 4)
 
-/* There are 128 shared peripheral interrupts assigned to
- * INTID[160:32]. The first 32 interrupts are reserved.
- */
-#define DBX500_NR_INTERNAL_IRQS		161
+#define DBX500_NR_INTERNAL_IRQS		160
 
 /* After chip-specific IRQ numbers we have the GPIO ones */
 #define NOMADIK_NR_GPIO			288
 #define NOMADIK_GPIO_TO_IRQ(gpio)	((gpio) + DBX500_NR_INTERNAL_IRQS)
 #define NOMADIK_IRQ_TO_GPIO(irq)	((irq) - DBX500_NR_INTERNAL_IRQS)
-#define IRQ_BOARD_START			NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO)
+#define IRQ_GPIO_END			NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO)
+
+#define IRQ_SOC_START		IRQ_GPIO_END
+/* This will be overridden by SoC-specific irq headers */
+#define IRQ_SOC_END		IRQ_SOC_START
 
+#include <mach/irqs-db5500.h>
+#include <mach/irqs-db8500.h>
+
+#define IRQ_BOARD_START		IRQ_SOC_END
 /* This will be overridden by board-specific irq headers */
-#define IRQ_BOARD_END			IRQ_BOARD_START
+#define IRQ_BOARD_END		IRQ_BOARD_START
 
 #ifdef CONFIG_MACH_U8500
 #include <mach/irqs-board-mop500.h>
 #endif
 
-/*
- * After the board specific IRQ:s we reserve a range of IRQ:s in which virtual
- * IRQ:s representing modem IRQ:s can be allocated
- */
-#define IRQ_MODEM_EVENTS_BASE (IRQ_BOARD_END + 1)
-#define IRQ_MODEM_EVENTS_NBR 72
-#define IRQ_MODEM_EVENTS_END (IRQ_MODEM_EVENTS_BASE + IRQ_MODEM_EVENTS_NBR)
-
-/* List of virtual IRQ:s that are allocated from the range above */
-#define MBOX_PAIR0_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 43)
-#define MBOX_PAIR1_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 45)
-#define MBOX_PAIR2_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 41)
+#ifdef CONFIG_MACH_U5500
+#include <mach/irqs-board-u5500.h>
+#endif
 
-#define NR_IRQS				IRQ_MODEM_EVENTS_END
+#define NR_IRQS			IRQ_BOARD_END
 
 #endif /* ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-ux500/include/mach/prcmu-defs.h b/arch/arm/mach-ux500/include/mach/prcmu-defs.h
deleted file mode 100644
index 848ba64b561..00000000000
--- a/arch/arm/mach-ux500/include/mach/prcmu-defs.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Copyright (C) STMicroelectronics 2009
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Sundar Iyer <sundar.iyer@stericsson.com>
- * Author: Martin Persson <martin.persson@stericsson.com>
- *
- * License Terms: GNU General Public License v2
- *
- * PRCM Unit definitions
- */
-
-#ifndef __MACH_PRCMU_DEFS_H
-#define __MACH_PRCMU_DEFS_H
-
-enum prcmu_cpu_opp {
-	CPU_OPP_INIT	  = 0x00,
-	CPU_OPP_NO_CHANGE = 0x01,
-	CPU_OPP_100	  = 0x02,
-	CPU_OPP_50	  = 0x03,
-	CPU_OPP_MAX	  = 0x04,
-	CPU_OPP_EXT_CLK	  = 0x07
-};
-enum prcmu_ape_opp {
-	APE_OPP_NO_CHANGE = 0x00,
-	APE_OPP_100	  = 0x02,
-	APE_OPP_50	  = 0x03,
-};
-
-#endif /* __MACH_PRCMU_DEFS_H */
diff --git a/arch/arm/mach-ux500/include/mach/prcmu.h b/arch/arm/mach-ux500/include/mach/prcmu.h
deleted file mode 100644
index c49e456162e..00000000000
--- a/arch/arm/mach-ux500/include/mach/prcmu.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Copyright (C) STMicroelectronics 2009
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
- * Author: Sundar Iyer <sundar.iyer@stericsson.com>
- * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
- *
- * License Terms: GNU General Public License v2
- *
- * PRCM Unit f/w API
- */
-#ifndef __MACH_PRCMU_H
-#define __MACH_PRCMU_H
-#include <mach/prcmu-defs.h>
-
-void __init prcmu_early_init(void);
-int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);
-int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size);
-int prcmu_set_ape_opp(enum prcmu_ape_opp opp);
-int prcmu_set_cpu_opp(enum prcmu_cpu_opp opp);
-int prcmu_set_ape_cpu_opps(enum prcmu_ape_opp ape_opp,
-			   enum prcmu_cpu_opp cpu_opp);
-int prcmu_get_ape_opp(void);
-int prcmu_get_cpu_opp(void);
-bool prcmu_has_arm_maxopp(void);
-
-#endif /* __MACH_PRCMU_H */
diff --git a/arch/arm/mach-ux500/prcmu.c b/arch/arm/mach-ux500/prcmu.c
deleted file mode 100644
index c522d26ef34..00000000000
--- a/arch/arm/mach-ux500/prcmu.c
+++ /dev/null
@@ -1,394 +0,0 @@
-/*
- * Copyright (C) STMicroelectronics 2009
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License Terms: GNU General Public License v2
- * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
- * Author: Sundar Iyer <sundar.iyer@stericsson.com>
- * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
- *
- * U8500 PRCM Unit interface driver
- *
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/mutex.h>
-#include <linux/completion.h>
-#include <linux/jiffies.h>
-#include <linux/bitops.h>
-#include <linux/interrupt.h>
-
-#include <mach/hardware.h>
-#include <mach/prcmu-regs.h>
-#include <mach/prcmu-defs.h>
-
-/* Global var to runtime determine TCDM base for v2 or v1 */
-static __iomem void *tcdm_base;
-
-#define _MBOX_HEADER		(tcdm_base + 0xFE8)
-#define MBOX_HEADER_REQ_MB0	(_MBOX_HEADER + 0x0)
-
-#define REQ_MB1 (tcdm_base + 0xFD0)
-#define REQ_MB5 (tcdm_base + 0xE44)
-
-#define REQ_MB1_ARMOPP		(REQ_MB1 + 0x0)
-#define REQ_MB1_APEOPP		(REQ_MB1 + 0x1)
-#define REQ_MB1_BOOSTOPP	(REQ_MB1 + 0x2)
-
-#define ACK_MB1 (tcdm_base + 0xE04)
-#define ACK_MB5 (tcdm_base + 0xDF4)
-
-#define ACK_MB1_CURR_ARMOPP		(ACK_MB1 + 0x0)
-#define ACK_MB1_CURR_APEOPP		(ACK_MB1 + 0x1)
-
-#define REQ_MB5_I2C_SLAVE_OP (REQ_MB5)
-#define REQ_MB5_I2C_HW_BITS (REQ_MB5 + 1)
-#define REQ_MB5_I2C_REG (REQ_MB5 + 2)
-#define REQ_MB5_I2C_VAL (REQ_MB5 + 3)
-
-#define ACK_MB5_I2C_STATUS (ACK_MB5 + 1)
-#define ACK_MB5_I2C_VAL (ACK_MB5 + 3)
-
-#define PRCM_AVS_VARM_MAX_OPP		(tcdm_base + 0x2E4)
-#define PRCM_AVS_ISMODEENABLE		7
-#define PRCM_AVS_ISMODEENABLE_MASK	(1 << PRCM_AVS_ISMODEENABLE)
-
-#define I2C_WRITE(slave) \
-	(((slave) << 1) | (cpu_is_u8500v2() ? BIT(6) : 0))
-#define I2C_READ(slave) \
-	(((slave) << 1) | (cpu_is_u8500v2() ? BIT(6) : 0) | BIT(0))
-#define I2C_STOP_EN BIT(3)
-
-enum mb1_h {
-	MB1H_ARM_OPP = 1,
-	MB1H_APE_OPP,
-	MB1H_ARM_APE_OPP,
-};
-
-static struct {
-	struct mutex lock;
-	struct completion work;
-	struct {
-		u8 arm_opp;
-		u8 ape_opp;
-		u8 arm_status;
-		u8 ape_status;
-	} ack;
-} mb1_transfer;
-
-enum ack_mb5_status {
-	I2C_WR_OK = 0x01,
-	I2C_RD_OK = 0x02,
-};
-
-#define MBOX_BIT BIT
-#define NUM_MBOX 8
-
-static struct {
-	struct mutex lock;
-	struct completion work;
-	bool failed;
-	struct {
-		u8 status;
-		u8 value;
-	} ack;
-} mb5_transfer;
-
-/**
- * prcmu_abb_read() - Read register value(s) from the ABB.
- * @slave:	The I2C slave address.
- * @reg:	The (start) register address.
- * @value:	The read out value(s).
- * @size:	The number of registers to read.
- *
- * Reads register value(s) from the ABB.
- * @size has to be 1 for the current firmware version.
- */
-int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
-{
-	int r;
-
-	if (size != 1)
-		return -EINVAL;
-
-	r = mutex_lock_interruptible(&mb5_transfer.lock);
-	if (r)
-		return r;
-
-	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
-		cpu_relax();
-
-	writeb(I2C_READ(slave), REQ_MB5_I2C_SLAVE_OP);
-	writeb(I2C_STOP_EN, REQ_MB5_I2C_HW_BITS);
-	writeb(reg, REQ_MB5_I2C_REG);
-
-	writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET);
-	if (!wait_for_completion_timeout(&mb5_transfer.work,
-			msecs_to_jiffies(500))) {
-		pr_err("prcmu: prcmu_abb_read timed out.\n");
-		r = -EIO;
-		goto unlock_and_return;
-	}
-	r = ((mb5_transfer.ack.status == I2C_RD_OK) ? 0 : -EIO);
-	if (!r)
-		*value = mb5_transfer.ack.value;
-
-unlock_and_return:
-	mutex_unlock(&mb5_transfer.lock);
-	return r;
-}
-EXPORT_SYMBOL(prcmu_abb_read);
-
-/**
- * prcmu_abb_write() - Write register value(s) to the ABB.
- * @slave:	The I2C slave address.
- * @reg:	The (start) register address.
- * @value:	The value(s) to write.
- * @size:	The number of registers to write.
- *
- * Reads register value(s) from the ABB.
- * @size has to be 1 for the current firmware version.
- */
-int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
-{
-	int r;
-
-	if (size != 1)
-		return -EINVAL;
-
-	r = mutex_lock_interruptible(&mb5_transfer.lock);
-	if (r)
-		return r;
-
-
-	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
-		cpu_relax();
-
-	writeb(I2C_WRITE(slave), REQ_MB5_I2C_SLAVE_OP);
-	writeb(I2C_STOP_EN, REQ_MB5_I2C_HW_BITS);
-	writeb(reg, REQ_MB5_I2C_REG);
-	writeb(*value, REQ_MB5_I2C_VAL);
-
-	writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET);
-	if (!wait_for_completion_timeout(&mb5_transfer.work,
-			msecs_to_jiffies(500))) {
-		pr_err("prcmu: prcmu_abb_write timed out.\n");
-		r = -EIO;
-		goto unlock_and_return;
-	}
-	r = ((mb5_transfer.ack.status == I2C_WR_OK) ? 0 : -EIO);
-
-unlock_and_return:
-	mutex_unlock(&mb5_transfer.lock);
-	return r;
-}
-EXPORT_SYMBOL(prcmu_abb_write);
-
-static int set_ape_cpu_opps(u8 header, enum prcmu_ape_opp ape_opp,
-			    enum prcmu_cpu_opp cpu_opp)
-{
-	bool do_ape;
-	bool do_arm;
-	int err = 0;
-
-	do_ape = ((header == MB1H_APE_OPP) || (header == MB1H_ARM_APE_OPP));
-	do_arm = ((header == MB1H_ARM_OPP) || (header == MB1H_ARM_APE_OPP));
-
-	mutex_lock(&mb1_transfer.lock);
-
-	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
-		cpu_relax();
-
-	writeb(0, MBOX_HEADER_REQ_MB0);
-	writeb(cpu_opp, REQ_MB1_ARMOPP);
-	writeb(ape_opp, REQ_MB1_APEOPP);
-	writeb(0, REQ_MB1_BOOSTOPP);
-	writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
-	wait_for_completion(&mb1_transfer.work);
-	if ((do_ape) && (mb1_transfer.ack.ape_status != 0))
-		err = -EIO;
-	if ((do_arm) && (mb1_transfer.ack.arm_status != 0))
-		err = -EIO;
-
-	mutex_unlock(&mb1_transfer.lock);
-
-	return err;
-}
-
-/**
- * prcmu_set_ape_opp() - Set the OPP of the APE.
- * @opp:	The OPP to set.
- *
- * This function sets the OPP of the APE.
- */
-int prcmu_set_ape_opp(enum prcmu_ape_opp opp)
-{
-	return set_ape_cpu_opps(MB1H_APE_OPP, opp, APE_OPP_NO_CHANGE);
-}
-EXPORT_SYMBOL(prcmu_set_ape_opp);
-
-/**
- * prcmu_set_cpu_opp() - Set the OPP of the CPU.
- * @opp:	The OPP to set.
- *
- * This function sets the OPP of the CPU.
- */
-int prcmu_set_cpu_opp(enum prcmu_cpu_opp opp)
-{
-	return set_ape_cpu_opps(MB1H_ARM_OPP, CPU_OPP_NO_CHANGE, opp);
-}
-EXPORT_SYMBOL(prcmu_set_cpu_opp);
-
-/**
- * prcmu_set_ape_cpu_opps() - Set the OPPs of the APE and the CPU.
- * @ape_opp:	The APE OPP to set.
- * @cpu_opp:	The CPU OPP to set.
- *
- * This function sets the OPPs of the APE and the CPU.
- */
-int prcmu_set_ape_cpu_opps(enum prcmu_ape_opp ape_opp,
-			   enum prcmu_cpu_opp cpu_opp)
-{
-	return set_ape_cpu_opps(MB1H_ARM_APE_OPP, ape_opp, cpu_opp);
-}
-EXPORT_SYMBOL(prcmu_set_ape_cpu_opps);
-
-/**
- * prcmu_get_ape_opp() - Get the OPP of the APE.
- *
- * This function gets the OPP of the APE.
- */
-enum prcmu_ape_opp prcmu_get_ape_opp(void)
-{
-	return readb(ACK_MB1_CURR_APEOPP);
-}
-EXPORT_SYMBOL(prcmu_get_ape_opp);
-
-/**
- * prcmu_get_cpu_opp() - Get the OPP of the CPU.
- *
- * This function gets the OPP of the CPU. The OPP is specified in %%.
- * PRCMU_OPP_EXT is a special OPP value, not specified in %%.
- */
-int prcmu_get_cpu_opp(void)
-{
-	return readb(ACK_MB1_CURR_ARMOPP);
-}
-EXPORT_SYMBOL(prcmu_get_cpu_opp);
-
-bool prcmu_has_arm_maxopp(void)
-{
-	return (readb(PRCM_AVS_VARM_MAX_OPP) & PRCM_AVS_ISMODEENABLE_MASK)
-		== PRCM_AVS_ISMODEENABLE_MASK;
-}
-
-static void read_mailbox_0(void)
-{
-	writel(MBOX_BIT(0), PRCM_ARM_IT1_CLEAR);
-}
-
-static void read_mailbox_1(void)
-{
-	mb1_transfer.ack.arm_opp = readb(ACK_MB1_CURR_ARMOPP);
-	mb1_transfer.ack.ape_opp = readb(ACK_MB1_CURR_APEOPP);
-	complete(&mb1_transfer.work);
-	writel(MBOX_BIT(1), PRCM_ARM_IT1_CLEAR);
-}
-
-static void read_mailbox_2(void)
-{
-	writel(MBOX_BIT(2), PRCM_ARM_IT1_CLEAR);
-}
-
-static void read_mailbox_3(void)
-{
-	writel(MBOX_BIT(3), PRCM_ARM_IT1_CLEAR);
-}
-
-static void read_mailbox_4(void)
-{
-	writel(MBOX_BIT(4), PRCM_ARM_IT1_CLEAR);
-}
-
-static void read_mailbox_5(void)
-{
-	mb5_transfer.ack.status = readb(ACK_MB5_I2C_STATUS);
-	mb5_transfer.ack.value = readb(ACK_MB5_I2C_VAL);
-	complete(&mb5_transfer.work);
-	writel(MBOX_BIT(5), PRCM_ARM_IT1_CLEAR);
-}
-
-static void read_mailbox_6(void)
-{
-	writel(MBOX_BIT(6), PRCM_ARM_IT1_CLEAR);
-}
-
-static void read_mailbox_7(void)
-{
-	writel(MBOX_BIT(7), PRCM_ARM_IT1_CLEAR);
-}
-
-static void (* const read_mailbox[NUM_MBOX])(void) = {
-	read_mailbox_0,
-	read_mailbox_1,
-	read_mailbox_2,
-	read_mailbox_3,
-	read_mailbox_4,
-	read_mailbox_5,
-	read_mailbox_6,
-	read_mailbox_7
-};
-
-static irqreturn_t prcmu_irq_handler(int irq, void *data)
-{
-	u32 bits;
-	u8 n;
-
-	bits = (readl(PRCM_ARM_IT1_VAL) & (MBOX_BIT(NUM_MBOX) - 1));
-	if (unlikely(!bits))
-		return IRQ_NONE;
-
-	for (n = 0; bits; n++) {
-		if (bits & MBOX_BIT(n)) {
-			bits -= MBOX_BIT(n);
-			read_mailbox[n]();
-		}
-	}
-	return IRQ_HANDLED;
-}
-
-void __init prcmu_early_init(void)
-{
-	if (cpu_is_u8500v11() || cpu_is_u8500ed()) {
-		tcdm_base = __io_address(U8500_PRCMU_TCDM_BASE_V1);
-	} else if (cpu_is_u8500v2()) {
-		tcdm_base = __io_address(U8500_PRCMU_TCDM_BASE);
-	} else {
-		pr_err("prcmu: Unsupported chip version\n");
-		BUG();
-	}
-}
-
-static int __init prcmu_init(void)
-{
-	if (cpu_is_u8500ed()) {
-		pr_err("prcmu: Unsupported chip version\n");
-		return 0;
-	}
-
-	mutex_init(&mb1_transfer.lock);
-	init_completion(&mb1_transfer.work);
-	mutex_init(&mb5_transfer.lock);
-	init_completion(&mb5_transfer.work);
-
-	/* Clean up the mailbox interrupts after pre-kernel code. */
-	writel((MBOX_BIT(NUM_MBOX) - 1), PRCM_ARM_IT1_CLEAR);
-
-	return request_irq(IRQ_DB8500_PRCMU1, prcmu_irq_handler, 0,
-			   "prcmu", NULL);
-}
-
-arch_initcall(prcmu_init);
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index c7f1a6f16b6..e2fc2d21fa6 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -39,3 +39,5 @@ obj-$(CONFIG_X86_CPUFREQ_NFORCE2)	+= cpufreq-nforce2.o
 
 ##################################################################################d
 
+# ARM SoC drivers
+obj-$(CONFIG_UX500_SOC_DB8500)		+= db8500-cpufreq.o
diff --git a/drivers/cpufreq/db8500-cpufreq.c b/drivers/cpufreq/db8500-cpufreq.c
new file mode 100644
index 00000000000..d90456a809f
--- /dev/null
+++ b/drivers/cpufreq/db8500-cpufreq.c
@@ -0,0 +1,169 @@
+/*
+ * Copyright (C) STMicroelectronics 2009
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ * Author: Sundar Iyer <sundar.iyer@stericsson.com>
+ * Author: Martin Persson <martin.persson@stericsson.com>
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/cpufreq.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/mfd/db8500-prcmu.h>
+#include <mach/id.h>
+
+static struct cpufreq_frequency_table freq_table[] = {
+	[0] = {
+		.index = 0,
+		.frequency = 300000,
+	},
+	[1] = {
+		.index = 1,
+		.frequency = 600000,
+	},
+	[2] = {
+		/* Used for MAX_OPP, if available */
+		.index = 2,
+		.frequency = CPUFREQ_TABLE_END,
+	},
+	[3] = {
+		.index = 3,
+		.frequency = CPUFREQ_TABLE_END,
+	},
+};
+
+static enum arm_opp idx2opp[] = {
+	ARM_50_OPP,
+	ARM_100_OPP,
+	ARM_MAX_OPP
+};
+
+static struct freq_attr *db8500_cpufreq_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	NULL,
+};
+
+static int db8500_cpufreq_verify_speed(struct cpufreq_policy *policy)
+{
+	return cpufreq_frequency_table_verify(policy, freq_table);
+}
+
+static int db8500_cpufreq_target(struct cpufreq_policy *policy,
+				unsigned int target_freq,
+				unsigned int relation)
+{
+	struct cpufreq_freqs freqs;
+	unsigned int idx;
+
+	/* scale the target frequency to one of the extremes supported */
+	if (target_freq < policy->cpuinfo.min_freq)
+		target_freq = policy->cpuinfo.min_freq;
+	if (target_freq > policy->cpuinfo.max_freq)
+		target_freq = policy->cpuinfo.max_freq;
+
+	/* Lookup the next frequency */
+	if (cpufreq_frequency_table_target
+	    (policy, freq_table, target_freq, relation, &idx)) {
+		return -EINVAL;
+	}
+
+	freqs.old = policy->cur;
+	freqs.new = freq_table[idx].frequency;
+	freqs.cpu = policy->cpu;
+
+	if (freqs.old == freqs.new)
+		return 0;
+
+	/* pre-change notification */
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+	/* request the PRCM unit for opp change */
+	if (prcmu_set_arm_opp(idx2opp[idx])) {
+		pr_err("db8500-cpufreq:  Failed to set OPP level\n");
+		return -EINVAL;
+	}
+
+	/* post change notification */
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+	return 0;
+}
+
+static unsigned int db8500_cpufreq_getspeed(unsigned int cpu)
+{
+	int i;
+	/* request the prcm to get the current ARM opp */
+	for (i = 0; prcmu_get_arm_opp() != idx2opp[i]; i++)
+		;
+	return freq_table[i].frequency;
+}
+
+static int __cpuinit db8500_cpufreq_init(struct cpufreq_policy *policy)
+{
+	int res;
+	int i;
+
+	BUILD_BUG_ON(ARRAY_SIZE(idx2opp) + 1 != ARRAY_SIZE(freq_table));
+
+	if (cpu_is_u8500v2() && !prcmu_is_u8400()) {
+		freq_table[0].frequency = 400000;
+		freq_table[1].frequency = 800000;
+		if (prcmu_has_arm_maxopp())
+			freq_table[2].frequency = 1000000;
+	}
+
+	/* get policy fields based on the table */
+	res = cpufreq_frequency_table_cpuinfo(policy, freq_table);
+	if (!res)
+		cpufreq_frequency_table_get_attr(freq_table, policy->cpu);
+	else {
+		pr_err("db8500-cpufreq : Failed to read policy table\n");
+		return res;
+	}
+
+	policy->min = policy->cpuinfo.min_freq;
+	policy->max = policy->cpuinfo.max_freq;
+	policy->cur = db8500_cpufreq_getspeed(policy->cpu);
+
+	for (i = 0; freq_table[i].frequency != policy->cur; i++)
+		;
+
+	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+
+	/*
+	 * FIXME : Need to take time measurement across the target()
+	 *	   function with no/some/all drivers in the notification
+	 *	   list.
+	 */
+	policy->cpuinfo.transition_latency = 20 * 1000; /* in ns */
+
+	/* policy sharing between dual CPUs */
+	cpumask_copy(policy->cpus, &cpu_present_map);
+
+	policy->shared_type = CPUFREQ_SHARED_TYPE_ALL;
+
+	return 0;
+}
+
+static struct cpufreq_driver db8500_cpufreq_driver = {
+	.flags  = CPUFREQ_STICKY,
+	.verify = db8500_cpufreq_verify_speed,
+	.target = db8500_cpufreq_target,
+	.get    = db8500_cpufreq_getspeed,
+	.init   = db8500_cpufreq_init,
+	.name   = "DB8500",
+	.attr   = db8500_cpufreq_attr,
+};
+
+static int __init db8500_cpufreq_register(void)
+{
+	if (!cpu_is_u8500v20_or_later())
+		return -ENODEV;
+
+	pr_info("cpufreq for DB8500 started\n");
+	return cpufreq_register_driver(&db8500_cpufreq_driver);
+}
+device_initcall(db8500_cpufreq_register);
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 3ed3ff06be5..481770ab271 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -538,7 +538,7 @@ config AB8500_CORE
 
 config AB8500_I2C_CORE
 	bool "AB8500 register access via PRCMU I2C"
-	depends on AB8500_CORE && UX500_SOC_DB8500
+	depends on AB8500_CORE && MFD_DB8500_PRCMU
 	default y
 	help
 	  This enables register access to the AB8500 chip via PRCMU I2C.
@@ -575,6 +575,26 @@ config AB3550_CORE
 	  LEDs, vibrator, system power and temperature, power management
 	  and ALSA sound.
 
+config MFD_DB8500_PRCMU
+	bool "ST-Ericsson DB8500 Power Reset Control Management Unit"
+	depends on UX500_SOC_DB8500
+	select MFD_CORE
+	help
+	  Select this option to enable support for the DB8500 Power Reset
+	  and Control Management Unit. This is basically an autonomous
+	  system controller running an XP70 microprocessor, which is accessed
+	  through a register map.
+
+config MFD_DB5500_PRCMU
+	bool "ST-Ericsson DB5500 Power Reset Control Management Unit"
+	depends on UX500_SOC_DB5500
+	select MFD_CORE
+	help
+	  Select this option to enable support for the DB5500 Power Reset
+	  and Control Management Unit. This is basically an autonomous
+	  system controller running an XP70 microprocessor, which is accessed
+	  through a register map.
+
 config MFD_CS5535
 	tristate "Support for CS5535 and CS5536 southbridge core functions"
 	select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 419caa9d7dc..24aa44448da 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -74,9 +74,12 @@ obj-$(CONFIG_AB3100_CORE)	+= ab3100-core.o
 obj-$(CONFIG_AB3100_OTP)	+= ab3100-otp.o
 obj-$(CONFIG_AB3550_CORE)	+= ab3550-core.o
 obj-$(CONFIG_AB8500_CORE)	+= ab8500-core.o ab8500-sysctrl.o
-obj-$(CONFIG_AB8500_I2C_CORE)	+= ab8500-i2c.o
 obj-$(CONFIG_AB8500_DEBUG)	+= ab8500-debugfs.o
 obj-$(CONFIG_AB8500_GPADC)	+= ab8500-gpadc.o
+obj-$(CONFIG_MFD_DB8500_PRCMU)	+= db8500-prcmu.o
+# ab8500-i2c need to come after db8500-prcmu (which provides the channel)
+obj-$(CONFIG_AB8500_I2C_CORE)	+= ab8500-i2c.o
+obj-$(CONFIG_MFD_DB5500_PRCMU)	+= db5500-prcmu.o
 obj-$(CONFIG_MFD_TIMBERDALE)    += timberdale.o
 obj-$(CONFIG_PMIC_ADP5520)	+= adp5520.o
 obj-$(CONFIG_LPC_SCH)		+= lpc_sch.o
diff --git a/drivers/mfd/ab8500-i2c.c b/drivers/mfd/ab8500-i2c.c
index 821e6b86afd..9be541c6b00 100644
--- a/drivers/mfd/ab8500-i2c.c
+++ b/drivers/mfd/ab8500-i2c.c
@@ -11,8 +11,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/mfd/ab8500.h>
-
-#include <mach/prcmu.h>
+#include <linux/mfd/db8500-prcmu.h>
 
 static int ab8500_i2c_write(struct ab8500 *ab8500, u16 addr, u8 data)
 {
diff --git a/arch/arm/mach-ux500/include/mach/prcmu-regs.h b/drivers/mfd/db5500-prcmu-regs.h
index 455467e8879..9a8e9e4ddd3 100644
--- a/arch/arm/mach-ux500/include/mach/prcmu-regs.h
+++ b/drivers/mfd/db5500-prcmu-regs.h
@@ -15,11 +15,20 @@
 
 #include <mach/hardware.h>
 
-#define _PRCMU_BASE		IO_ADDRESS(U8500_PRCMU_BASE)
-
 #define PRCM_ARM_PLLDIVPS	(_PRCMU_BASE + 0x118)
+#define PRCM_ARM_PLLDIVPS_ARM_BRM_RATE		0x3f
+#define PRCM_ARM_PLLDIVPS_MAX_MASK		0xf
+
+#define PRCM_PLLARM_LOCKP       (_PRCMU_BASE + 0x0a8)
+#define PRCM_PLLARM_LOCKP_PRCM_PLLARM_LOCKP3	0x2
+
 #define PRCM_ARM_CHGCLKREQ	(_PRCMU_BASE + 0x114)
+#define PRCM_ARM_CHGCLKREQ_PRCM_ARM_CHGCLKREQ	0x1
+
 #define PRCM_PLLARM_ENABLE	(_PRCMU_BASE + 0x98)
+#define PRCM_PLLARM_ENABLE_PRCM_PLLARM_ENABLE	0x1
+#define PRCM_PLLARM_ENABLE_PRCM_PLLARM_COUNTON	0x100
+
 #define PRCM_ARMCLKFIX_MGT	(_PRCMU_BASE + 0x0)
 #define PRCM_A9_RESETN_CLR	(_PRCMU_BASE + 0x1f4)
 #define PRCM_A9_RESETN_SET	(_PRCMU_BASE + 0x1f0)
@@ -28,7 +37,8 @@
 
 /* ARM WFI Standby signal register */
 #define PRCM_ARM_WFI_STANDBY    (_PRCMU_BASE + 0x130)
-#define PRCMU_IOCR              (_PRCMU_BASE + 0x310)
+#define PRCM_IOCR		(_PRCMU_BASE + 0x310)
+#define PRCM_IOCR_IOFORCE			0x1
 
 /* CPU mailbox registers */
 #define PRCM_MBOX_CPU_VAL	(_PRCMU_BASE + 0x0fc)
@@ -37,6 +47,8 @@
 
 /* Dual A9 core interrupt management unit registers */
 #define PRCM_A9_MASK_REQ	(_PRCMU_BASE + 0x328)
+#define PRCM_A9_MASK_REQ_PRCM_A9_MASK_REQ	0x1
+
 #define PRCM_A9_MASK_ACK	(_PRCMU_BASE + 0x32c)
 #define PRCM_ARMITMSK31TO0	(_PRCMU_BASE + 0x11c)
 #define PRCM_ARMITMSK63TO32	(_PRCMU_BASE + 0x120)
@@ -74,14 +86,17 @@
 /* PRCMU clock/PLL/reset registers */
 #define PRCM_PLLDSI_FREQ           (_PRCMU_BASE + 0x500)
 #define PRCM_PLLDSI_ENABLE         (_PRCMU_BASE + 0x504)
+#define PRCM_PLLDSI_LOCKP          (_PRCMU_BASE + 0x508)
 #define PRCM_LCDCLK_MGT            (_PRCMU_BASE + 0x044)
 #define PRCM_MCDECLK_MGT           (_PRCMU_BASE + 0x064)
 #define PRCM_HDMICLK_MGT           (_PRCMU_BASE + 0x058)
 #define PRCM_TVCLK_MGT             (_PRCMU_BASE + 0x07c)
 #define PRCM_DSI_PLLOUT_SEL        (_PRCMU_BASE + 0x530)
 #define PRCM_DSITVCLK_DIV          (_PRCMU_BASE + 0x52C)
+#define PRCM_PLLDSI_LOCKP          (_PRCMU_BASE + 0x508)
 #define PRCM_APE_RESETN_SET        (_PRCMU_BASE + 0x1E4)
 #define PRCM_APE_RESETN_CLR        (_PRCMU_BASE + 0x1E8)
+#define PRCM_CLKOCR		   (_PRCMU_BASE + 0x1CC)
 
 /* ePOD and memory power signal control registers */
 #define PRCM_EPOD_C_SET            (_PRCMU_BASE + 0x410)
@@ -92,5 +107,9 @@
 
 /* Miscellaneous unit registers */
 #define PRCM_DSI_SW_RESET          (_PRCMU_BASE + 0x324)
+#define PRCM_GPIOCR                (_PRCMU_BASE + 0x138)
+#define PRCM_GPIOCR_DBG_STM_MOD_CMD1            0x800
+#define PRCM_GPIOCR_DBG_UARTMOD_CMD0            0x1
+
 
-#endif /* __MACH_PRCMU_REGS_H */
+#endif /* __MACH_PRCMU__REGS_H */
diff --git a/drivers/mfd/db5500-prcmu.c b/drivers/mfd/db5500-prcmu.c
new file mode 100644
index 00000000000..9dbb3cab4a6
--- /dev/null
+++ b/drivers/mfd/db5500-prcmu.c
@@ -0,0 +1,448 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
+ *
+ * U5500 PRCM Unit interface driver
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/mutex.h>
+#include <linux/completion.h>
+#include <linux/irq.h>
+#include <linux/jiffies.h>
+#include <linux/bitops.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/db5500-prcmu.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/db5500-regs.h>
+#include "db5500-prcmu-regs.h"
+
+#define _PRCM_MB_HEADER (tcdm_base + 0xFE8)
+#define PRCM_REQ_MB0_HEADER (_PRCM_MB_HEADER + 0x0)
+#define PRCM_REQ_MB1_HEADER (_PRCM_MB_HEADER + 0x1)
+#define PRCM_REQ_MB2_HEADER (_PRCM_MB_HEADER + 0x2)
+#define PRCM_REQ_MB3_HEADER (_PRCM_MB_HEADER + 0x3)
+#define PRCM_REQ_MB4_HEADER (_PRCM_MB_HEADER + 0x4)
+#define PRCM_REQ_MB5_HEADER (_PRCM_MB_HEADER + 0x5)
+#define PRCM_REQ_MB6_HEADER (_PRCM_MB_HEADER + 0x6)
+#define PRCM_REQ_MB7_HEADER (_PRCM_MB_HEADER + 0x7)
+#define PRCM_ACK_MB0_HEADER (_PRCM_MB_HEADER + 0x8)
+#define PRCM_ACK_MB1_HEADER (_PRCM_MB_HEADER + 0x9)
+#define PRCM_ACK_MB2_HEADER (_PRCM_MB_HEADER + 0xa)
+#define PRCM_ACK_MB3_HEADER (_PRCM_MB_HEADER + 0xb)
+#define PRCM_ACK_MB4_HEADER (_PRCM_MB_HEADER + 0xc)
+#define PRCM_ACK_MB5_HEADER (_PRCM_MB_HEADER + 0xd)
+#define PRCM_ACK_MB6_HEADER (_PRCM_MB_HEADER + 0xe)
+#define PRCM_ACK_MB7_HEADER (_PRCM_MB_HEADER + 0xf)
+
+/* Req Mailboxes */
+#define PRCM_REQ_MB0 (tcdm_base + 0xFD8)
+#define PRCM_REQ_MB1 (tcdm_base + 0xFCC)
+#define PRCM_REQ_MB2 (tcdm_base + 0xFC4)
+#define PRCM_REQ_MB3 (tcdm_base + 0xFC0)
+#define PRCM_REQ_MB4 (tcdm_base + 0xF98)
+#define PRCM_REQ_MB5 (tcdm_base + 0xF90)
+#define PRCM_REQ_MB6 (tcdm_base + 0xF8C)
+#define PRCM_REQ_MB7 (tcdm_base + 0xF84)
+
+/* Ack Mailboxes */
+#define PRCM_ACK_MB0 (tcdm_base + 0xF38)
+#define PRCM_ACK_MB1 (tcdm_base + 0xF30)
+#define PRCM_ACK_MB2 (tcdm_base + 0xF24)
+#define PRCM_ACK_MB3 (tcdm_base + 0xF20)
+#define PRCM_ACK_MB4 (tcdm_base + 0xF1C)
+#define PRCM_ACK_MB5 (tcdm_base + 0xF14)
+#define PRCM_ACK_MB6 (tcdm_base + 0xF0C)
+#define PRCM_ACK_MB7 (tcdm_base + 0xF08)
+
+enum mb_return_code {
+	RC_SUCCESS,
+	RC_FAIL,
+};
+
+/* Mailbox 0 headers. */
+enum mb0_header {
+	/* request */
+	RMB0H_PWR_STATE_TRANS = 1,
+	RMB0H_WAKE_UP_CFG,
+	RMB0H_RD_WAKE_UP_ACK,
+	/* acknowledge */
+	AMB0H_WAKE_UP = 1,
+};
+
+/* Mailbox 5 headers. */
+enum mb5_header {
+	MB5H_I2C_WRITE = 1,
+	MB5H_I2C_READ,
+};
+
+/* Request mailbox 5 fields. */
+#define PRCM_REQ_MB5_I2C_SLAVE (PRCM_REQ_MB5 + 0)
+#define PRCM_REQ_MB5_I2C_REG (PRCM_REQ_MB5 + 1)
+#define PRCM_REQ_MB5_I2C_SIZE (PRCM_REQ_MB5 + 2)
+#define PRCM_REQ_MB5_I2C_DATA (PRCM_REQ_MB5 + 4)
+
+/* Acknowledge mailbox 5 fields. */
+#define PRCM_ACK_MB5_RETURN_CODE (PRCM_ACK_MB5 + 0)
+#define PRCM_ACK_MB5_I2C_DATA (PRCM_ACK_MB5 + 4)
+
+#define NUM_MB 8
+#define MBOX_BIT BIT
+#define ALL_MBOX_BITS (MBOX_BIT(NUM_MB) - 1)
+
+/*
+* Used by MCDE to setup all necessary PRCMU registers
+*/
+#define PRCMU_RESET_DSIPLL			0x00004000
+#define PRCMU_UNCLAMP_DSIPLL			0x00400800
+
+/* HDMI CLK MGT PLLSW=001 (PLLSOC0), PLLDIV=0x8, = 50 Mhz*/
+#define PRCMU_DSI_CLOCK_SETTING			0x00000128
+/* TVCLK_MGT PLLSW=001 (PLLSOC0) PLLDIV=0x13, = 19.05 MHZ */
+#define PRCMU_DSI_LP_CLOCK_SETTING		0x00000135
+#define PRCMU_PLLDSI_FREQ_SETTING		0x0004013C
+#define PRCMU_DSI_PLLOUT_SEL_SETTING		0x00000002
+#define PRCMU_ENABLE_ESCAPE_CLOCK_DIV		0x03000101
+#define PRCMU_DISABLE_ESCAPE_CLOCK_DIV		0x00000101
+
+#define PRCMU_ENABLE_PLLDSI			0x00000001
+#define PRCMU_DISABLE_PLLDSI			0x00000000
+
+#define PRCMU_DSI_RESET_SW			0x00000003
+
+#define PRCMU_PLLDSI_LOCKP_LOCKED		0x3
+
+/*
+ * mb0_transfer - state needed for mailbox 0 communication.
+ * @lock:		The transaction lock.
+ */
+static struct {
+	spinlock_t lock;
+} mb0_transfer;
+
+/*
+ * mb5_transfer - state needed for mailbox 5 communication.
+ * @lock:	The transaction lock.
+ * @work:	The transaction completion structure.
+ * @ack:	Reply ("acknowledge") data.
+ */
+static struct {
+	struct mutex lock;
+	struct completion work;
+	struct {
+		u8 header;
+		u8 status;
+		u8 value[4];
+	} ack;
+} mb5_transfer;
+
+/* PRCMU TCDM base IO address. */
+static __iomem void *tcdm_base;
+
+/**
+ * db5500_prcmu_abb_read() - Read register value(s) from the ABB.
+ * @slave:	The I2C slave address.
+ * @reg:	The (start) register address.
+ * @value:	The read out value(s).
+ * @size:	The number of registers to read.
+ *
+ * Reads register value(s) from the ABB.
+ * @size has to be <= 4.
+ */
+int db5500_prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
+{
+	int r;
+
+	if ((size < 1) || (4 < size))
+		return -EINVAL;
+
+	mutex_lock(&mb5_transfer.lock);
+
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
+		cpu_relax();
+	writeb(slave, PRCM_REQ_MB5_I2C_SLAVE);
+	writeb(reg, PRCM_REQ_MB5_I2C_REG);
+	writeb(size, PRCM_REQ_MB5_I2C_SIZE);
+	writeb(MB5H_I2C_READ, PRCM_REQ_MB5_HEADER);
+
+	writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET);
+	wait_for_completion(&mb5_transfer.work);
+
+	r = 0;
+	if ((mb5_transfer.ack.header == MB5H_I2C_READ) &&
+		(mb5_transfer.ack.status == RC_SUCCESS))
+		memcpy(value, mb5_transfer.ack.value, (size_t)size);
+	else
+		r = -EIO;
+
+	mutex_unlock(&mb5_transfer.lock);
+
+	return r;
+}
+
+/**
+ * db5500_prcmu_abb_write() - Write register value(s) to the ABB.
+ * @slave:	The I2C slave address.
+ * @reg:	The (start) register address.
+ * @value:	The value(s) to write.
+ * @size:	The number of registers to write.
+ *
+ * Writes register value(s) to the ABB.
+ * @size has to be <= 4.
+ */
+int db5500_prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
+{
+	int r;
+
+	if ((size < 1) || (4 < size))
+		return -EINVAL;
+
+	mutex_lock(&mb5_transfer.lock);
+
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
+		cpu_relax();
+	writeb(slave, PRCM_REQ_MB5_I2C_SLAVE);
+	writeb(reg, PRCM_REQ_MB5_I2C_REG);
+	writeb(size, PRCM_REQ_MB5_I2C_SIZE);
+	memcpy_toio(PRCM_REQ_MB5_I2C_DATA, value, size);
+	writeb(MB5H_I2C_WRITE, PRCM_REQ_MB5_HEADER);
+
+	writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET);
+	wait_for_completion(&mb5_transfer.work);
+
+	if ((mb5_transfer.ack.header == MB5H_I2C_WRITE) &&
+		(mb5_transfer.ack.status == RC_SUCCESS))
+		r = 0;
+	else
+		r = -EIO;
+
+	mutex_unlock(&mb5_transfer.lock);
+
+	return r;
+}
+
+int db5500_prcmu_enable_dsipll(void)
+{
+	int i;
+
+	/* Enable DSIPLL_RESETN resets */
+	writel(PRCMU_RESET_DSIPLL, PRCM_APE_RESETN_CLR);
+	/* Unclamp DSIPLL in/out */
+	writel(PRCMU_UNCLAMP_DSIPLL, PRCM_MMIP_LS_CLAMP_CLR);
+	/* Set DSI PLL FREQ */
+	writel(PRCMU_PLLDSI_FREQ_SETTING, PRCM_PLLDSI_FREQ);
+	writel(PRCMU_DSI_PLLOUT_SEL_SETTING,
+		PRCM_DSI_PLLOUT_SEL);
+	/* Enable Escape clocks */
+	writel(PRCMU_ENABLE_ESCAPE_CLOCK_DIV, PRCM_DSITVCLK_DIV);
+
+	/* Start DSI PLL */
+	writel(PRCMU_ENABLE_PLLDSI, PRCM_PLLDSI_ENABLE);
+	/* Reset DSI PLL */
+	writel(PRCMU_DSI_RESET_SW, PRCM_DSI_SW_RESET);
+	for (i = 0; i < 10; i++) {
+		if ((readl(PRCM_PLLDSI_LOCKP) &
+			PRCMU_PLLDSI_LOCKP_LOCKED) == PRCMU_PLLDSI_LOCKP_LOCKED)
+			break;
+		udelay(100);
+	}
+	/* Release DSIPLL_RESETN */
+	writel(PRCMU_RESET_DSIPLL, PRCM_APE_RESETN_SET);
+	return 0;
+}
+
+int db5500_prcmu_disable_dsipll(void)
+{
+	/* Disable dsi pll */
+	writel(PRCMU_DISABLE_PLLDSI, PRCM_PLLDSI_ENABLE);
+	/* Disable  escapeclock */
+	writel(PRCMU_DISABLE_ESCAPE_CLOCK_DIV, PRCM_DSITVCLK_DIV);
+	return 0;
+}
+
+int db5500_prcmu_set_display_clocks(void)
+{
+	/* HDMI and TVCLK Should be handled somewhere else */
+	/* PLLDIV=8, PLLSW=2, CLKEN=1 */
+	writel(PRCMU_DSI_CLOCK_SETTING, PRCM_HDMICLK_MGT);
+	/* PLLDIV=14, PLLSW=2, CLKEN=1 */
+	writel(PRCMU_DSI_LP_CLOCK_SETTING, PRCM_TVCLK_MGT);
+	return 0;
+}
+
+static void ack_dbb_wakeup(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&mb0_transfer.lock, flags);
+
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
+		cpu_relax();
+
+	writeb(RMB0H_RD_WAKE_UP_ACK, PRCM_REQ_MB0_HEADER);
+	writel(MBOX_BIT(0), PRCM_MBOX_CPU_SET);
+
+	spin_unlock_irqrestore(&mb0_transfer.lock, flags);
+}
+
+static inline void print_unknown_header_warning(u8 n, u8 header)
+{
+	pr_warning("prcmu: Unknown message header (%d) in mailbox %d.\n",
+		header, n);
+}
+
+static bool read_mailbox_0(void)
+{
+	bool r;
+	u8 header;
+
+	header = readb(PRCM_ACK_MB0_HEADER);
+	switch (header) {
+	case AMB0H_WAKE_UP:
+		r = true;
+		break;
+	default:
+		print_unknown_header_warning(0, header);
+		r = false;
+		break;
+	}
+	writel(MBOX_BIT(0), PRCM_ARM_IT1_CLEAR);
+	return r;
+}
+
+static bool read_mailbox_1(void)
+{
+	writel(MBOX_BIT(1), PRCM_ARM_IT1_CLEAR);
+	return false;
+}
+
+static bool read_mailbox_2(void)
+{
+	writel(MBOX_BIT(2), PRCM_ARM_IT1_CLEAR);
+	return false;
+}
+
+static bool read_mailbox_3(void)
+{
+	writel(MBOX_BIT(3), PRCM_ARM_IT1_CLEAR);
+	return false;
+}
+
+static bool read_mailbox_4(void)
+{
+	writel(MBOX_BIT(4), PRCM_ARM_IT1_CLEAR);
+	return false;
+}
+
+static bool read_mailbox_5(void)
+{
+	u8 header;
+
+	header = readb(PRCM_ACK_MB5_HEADER);
+	switch (header) {
+	case MB5H_I2C_READ:
+		memcpy_fromio(mb5_transfer.ack.value, PRCM_ACK_MB5_I2C_DATA, 4);
+	case MB5H_I2C_WRITE:
+		mb5_transfer.ack.header = header;
+		mb5_transfer.ack.status = readb(PRCM_ACK_MB5_RETURN_CODE);
+		complete(&mb5_transfer.work);
+		break;
+	default:
+		print_unknown_header_warning(5, header);
+		break;
+	}
+	writel(MBOX_BIT(5), PRCM_ARM_IT1_CLEAR);
+	return false;
+}
+
+static bool read_mailbox_6(void)
+{
+	writel(MBOX_BIT(6), PRCM_ARM_IT1_CLEAR);
+	return false;
+}
+
+static bool read_mailbox_7(void)
+{
+	writel(MBOX_BIT(7), PRCM_ARM_IT1_CLEAR);
+	return false;
+}
+
+static bool (* const read_mailbox[NUM_MB])(void) = {
+	read_mailbox_0,
+	read_mailbox_1,
+	read_mailbox_2,
+	read_mailbox_3,
+	read_mailbox_4,
+	read_mailbox_5,
+	read_mailbox_6,
+	read_mailbox_7
+};
+
+static irqreturn_t prcmu_irq_handler(int irq, void *data)
+{
+	u32 bits;
+	u8 n;
+	irqreturn_t r;
+
+	bits = (readl(PRCM_ARM_IT1_VAL) & ALL_MBOX_BITS);
+	if (unlikely(!bits))
+		return IRQ_NONE;
+
+	r = IRQ_HANDLED;
+	for (n = 0; bits; n++) {
+		if (bits & MBOX_BIT(n)) {
+			bits -= MBOX_BIT(n);
+			if (read_mailbox[n]())
+				r = IRQ_WAKE_THREAD;
+		}
+	}
+	return r;
+}
+
+static irqreturn_t prcmu_irq_thread_fn(int irq, void *data)
+{
+	ack_dbb_wakeup();
+	return IRQ_HANDLED;
+}
+
+void __init db5500_prcmu_early_init(void)
+{
+	tcdm_base = __io_address(U5500_PRCMU_TCDM_BASE);
+	spin_lock_init(&mb0_transfer.lock);
+	mutex_init(&mb5_transfer.lock);
+	init_completion(&mb5_transfer.work);
+}
+
+/**
+ * prcmu_fw_init - arch init call for the Linux PRCMU fw init logic
+ *
+ */
+int __init db5500_prcmu_init(void)
+{
+	int r = 0;
+
+	if (ux500_is_svp() || !cpu_is_u5500())
+		return -ENODEV;
+
+	/* Clean up the mailbox interrupts after pre-kernel code. */
+	writel(ALL_MBOX_BITS, PRCM_ARM_IT1_CLEAR);
+
+	r = request_threaded_irq(IRQ_DB5500_PRCMU1, prcmu_irq_handler,
+		prcmu_irq_thread_fn, 0, "prcmu", NULL);
+	if (r < 0) {
+		pr_err("prcmu: Failed to allocate IRQ_DB5500_PRCMU1.\n");
+		return -EBUSY;
+	}
+	return 0;
+}
+
+arch_initcall(db5500_prcmu_init);
diff --git a/drivers/mfd/db8500-prcmu-regs.h b/drivers/mfd/db8500-prcmu-regs.h
new file mode 100644
index 00000000000..3bbf04d5804
--- /dev/null
+++ b/drivers/mfd/db8500-prcmu-regs.h
@@ -0,0 +1,166 @@
+/*
+ * Copyright (C) STMicroelectronics 2009
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
+ * Author: Sundar Iyer <sundar.iyer@stericsson.com>
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * PRCM Unit registers
+ */
+#ifndef __DB8500_PRCMU_REGS_H
+#define __DB8500_PRCMU_REGS_H
+
+#include <linux/bitops.h>
+#include <mach/hardware.h>
+
+#define BITS(_start, _end) ((BIT(_end) - BIT(_start)) + BIT(_end))
+
+#define PRCM_ARM_PLLDIVPS 0x118
+#define PRCM_ARM_PLLDIVPS_ARM_BRM_RATE	BITS(0, 5)
+#define PRCM_ARM_PLLDIVPS_MAX_MASK	0xF
+
+#define PRCM_PLLARM_LOCKP 0x0A8
+#define PRCM_PLLARM_LOCKP_PRCM_PLLARM_LOCKP3 BIT(1)
+
+#define PRCM_ARM_CHGCLKREQ 0x114
+#define PRCM_ARM_CHGCLKREQ_PRCM_ARM_CHGCLKREQ BIT(0)
+
+#define PRCM_PLLARM_ENABLE 0x98
+#define PRCM_PLLARM_ENABLE_PRCM_PLLARM_ENABLE	BIT(0)
+#define PRCM_PLLARM_ENABLE_PRCM_PLLARM_COUNTON	BIT(8)
+
+#define PRCM_ARMCLKFIX_MGT	0x0
+#define PRCM_A9_RESETN_CLR	0x1f4
+#define PRCM_A9_RESETN_SET	0x1f0
+#define PRCM_ARM_LS_CLAMP	0x30C
+#define PRCM_SRAM_A9		0x308
+
+/* ARM WFI Standby signal register */
+#define PRCM_ARM_WFI_STANDBY	0x130
+#define PRCM_IOCR		0x310
+#define PRCM_IOCR_IOFORCE BIT(0)
+
+/* CPU mailbox registers */
+#define PRCM_MBOX_CPU_VAL 0x0FC
+#define PRCM_MBOX_CPU_SET 0x100
+
+/* Dual A9 core interrupt management unit registers */
+#define PRCM_A9_MASK_REQ 0x328
+#define PRCM_A9_MASK_REQ_PRCM_A9_MASK_REQ BIT(0)
+
+#define PRCM_A9_MASK_ACK	0x32C
+#define PRCM_ARMITMSK31TO0	0x11C
+#define PRCM_ARMITMSK63TO32	0x120
+#define PRCM_ARMITMSK95TO64	0x124
+#define PRCM_ARMITMSK127TO96	0x128
+#define PRCM_POWER_STATE_VAL	0x25C
+#define PRCM_ARMITVAL31TO0	0x260
+#define PRCM_ARMITVAL63TO32	0x264
+#define PRCM_ARMITVAL95TO64	0x268
+#define PRCM_ARMITVAL127TO96	0x26C
+
+#define PRCM_HOSTACCESS_REQ 0x334
+#define PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ BIT(0)
+
+#define PRCM_ARM_IT1_CLR 0x48C
+#define PRCM_ARM_IT1_VAL 0x494
+
+#define PRCM_ITSTATUS0		0x148
+#define PRCM_ITSTATUS1		0x150
+#define PRCM_ITSTATUS2		0x158
+#define PRCM_ITSTATUS3		0x160
+#define PRCM_ITSTATUS4		0x168
+#define PRCM_ITSTATUS5		0x484
+#define PRCM_ITCLEAR5		0x488
+#define PRCM_ARMIT_MASKXP70_IT	0x1018
+
+/* System reset register */
+#define PRCM_APE_SOFTRST 0x228
+
+/* Level shifter and clamp control registers */
+#define PRCM_MMIP_LS_CLAMP_SET 0x420
+#define PRCM_MMIP_LS_CLAMP_CLR 0x424
+
+/* PRCMU HW semaphore */
+#define PRCM_SEM 0x400
+#define PRCM_SEM_PRCM_SEM BIT(0)
+
+/* PRCMU clock/PLL/reset registers */
+#define PRCM_PLLDSI_FREQ	0x500
+#define PRCM_PLLDSI_ENABLE	0x504
+#define PRCM_PLLDSI_LOCKP	0x508
+#define PRCM_DSI_PLLOUT_SEL	0x530
+#define PRCM_DSITVCLK_DIV	0x52C
+#define PRCM_APE_RESETN_SET	0x1E4
+#define PRCM_APE_RESETN_CLR	0x1E8
+
+#define PRCM_TCR		0x1C8
+#define PRCM_TCR_TENSEL_MASK	BITS(0, 7)
+#define PRCM_TCR_STOP_TIMERS	BIT(16)
+#define PRCM_TCR_DOZE_MODE	BIT(17)
+
+#define PRCM_CLKOCR			0x1CC
+#define PRCM_CLKOCR_CLKODIV0_SHIFT	0
+#define PRCM_CLKOCR_CLKODIV0_MASK	BITS(0, 5)
+#define PRCM_CLKOCR_CLKOSEL0_SHIFT	6
+#define PRCM_CLKOCR_CLKOSEL0_MASK	BITS(6, 8)
+#define PRCM_CLKOCR_CLKODIV1_SHIFT	16
+#define PRCM_CLKOCR_CLKODIV1_MASK	BITS(16, 21)
+#define PRCM_CLKOCR_CLKOSEL1_SHIFT	22
+#define PRCM_CLKOCR_CLKOSEL1_MASK	BITS(22, 24)
+#define PRCM_CLKOCR_CLK1TYPE		BIT(28)
+
+#define PRCM_SGACLK_MGT		0x014
+#define PRCM_UARTCLK_MGT	0x018
+#define PRCM_MSP02CLK_MGT	0x01C
+#define PRCM_MSP1CLK_MGT	0x288
+#define PRCM_I2CCLK_MGT		0x020
+#define PRCM_SDMMCCLK_MGT	0x024
+#define PRCM_SLIMCLK_MGT	0x028
+#define PRCM_PER1CLK_MGT	0x02C
+#define PRCM_PER2CLK_MGT	0x030
+#define PRCM_PER3CLK_MGT	0x034
+#define PRCM_PER5CLK_MGT	0x038
+#define PRCM_PER6CLK_MGT	0x03C
+#define PRCM_PER7CLK_MGT	0x040
+#define PRCM_LCDCLK_MGT		0x044
+#define PRCM_BMLCLK_MGT		0x04C
+#define PRCM_HSITXCLK_MGT	0x050
+#define PRCM_HSIRXCLK_MGT	0x054
+#define PRCM_HDMICLK_MGT	0x058
+#define PRCM_APEATCLK_MGT	0x05C
+#define PRCM_APETRACECLK_MGT	0x060
+#define PRCM_MCDECLK_MGT	0x064
+#define PRCM_IPI2CCLK_MGT	0x068
+#define PRCM_DSIALTCLK_MGT	0x06C
+#define PRCM_DMACLK_MGT		0x074
+#define PRCM_B2R2CLK_MGT	0x078
+#define PRCM_TVCLK_MGT		0x07C
+#define PRCM_UNIPROCLK_MGT	0x278
+#define PRCM_SSPCLK_MGT		0x280
+#define PRCM_RNGCLK_MGT		0x284
+#define PRCM_UICCCLK_MGT	0x27C
+
+#define PRCM_CLK_MGT_CLKPLLDIV_MASK	BITS(0, 4)
+#define PRCM_CLK_MGT_CLKPLLSW_MASK	BITS(5, 7)
+#define PRCM_CLK_MGT_CLKEN		BIT(8)
+
+/* ePOD and memory power signal control registers */
+#define PRCM_EPOD_C_SET		0x410
+#define PRCM_SRAM_LS_SLEEP	0x304
+
+/* Debug power control unit registers */
+#define PRCM_POWER_STATE_SET 0x254
+
+/* Miscellaneous unit registers */
+#define PRCM_DSI_SW_RESET 0x324
+#define PRCM_GPIOCR		0x138
+
+/* GPIOCR register */
+#define PRCM_GPIOCR_SPI2_SELECT BIT(23)
+
+#define PRCM_DDR_SUBSYS_APE_MINBW  0x438
+
+#endif /* __DB8500_PRCMU_REGS_H */
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
new file mode 100644
index 00000000000..e63782107e2
--- /dev/null
+++ b/drivers/mfd/db8500-prcmu.c
@@ -0,0 +1,2069 @@
+/*
+ * Copyright (C) STMicroelectronics 2009
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
+ * Author: Sundar Iyer <sundar.iyer@stericsson.com>
+ * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
+ *
+ * U8500 PRCM Unit interface driver
+ *
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/mutex.h>
+#include <linux/completion.h>
+#include <linux/irq.h>
+#include <linux/jiffies.h>
+#include <linux/bitops.h>
+#include <linux/fs.h>
+#include <linux/platform_device.h>
+#include <linux/uaccess.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/db8500-prcmu.h>
+#include <linux/regulator/db8500-prcmu.h>
+#include <linux/regulator/machine.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/db8500-regs.h>
+#include <mach/id.h>
+#include "db8500-prcmu-regs.h"
+
+/* Offset for the firmware version within the TCPM */
+#define PRCMU_FW_VERSION_OFFSET 0xA4
+
+/* PRCMU project numbers, defined by PRCMU FW */
+#define PRCMU_PROJECT_ID_8500V1_0 1
+#define PRCMU_PROJECT_ID_8500V2_0 2
+#define PRCMU_PROJECT_ID_8400V2_0 3
+
+/* Index of different voltages to be used when accessing AVSData */
+#define PRCM_AVS_BASE		0x2FC
+#define PRCM_AVS_VBB_RET	(PRCM_AVS_BASE + 0x0)
+#define PRCM_AVS_VBB_MAX_OPP	(PRCM_AVS_BASE + 0x1)
+#define PRCM_AVS_VBB_100_OPP	(PRCM_AVS_BASE + 0x2)
+#define PRCM_AVS_VBB_50_OPP	(PRCM_AVS_BASE + 0x3)
+#define PRCM_AVS_VARM_MAX_OPP	(PRCM_AVS_BASE + 0x4)
+#define PRCM_AVS_VARM_100_OPP	(PRCM_AVS_BASE + 0x5)
+#define PRCM_AVS_VARM_50_OPP	(PRCM_AVS_BASE + 0x6)
+#define PRCM_AVS_VARM_RET	(PRCM_AVS_BASE + 0x7)
+#define PRCM_AVS_VAPE_100_OPP	(PRCM_AVS_BASE + 0x8)
+#define PRCM_AVS_VAPE_50_OPP	(PRCM_AVS_BASE + 0x9)
+#define PRCM_AVS_VMOD_100_OPP	(PRCM_AVS_BASE + 0xA)
+#define PRCM_AVS_VMOD_50_OPP	(PRCM_AVS_BASE + 0xB)
+#define PRCM_AVS_VSAFE		(PRCM_AVS_BASE + 0xC)
+
+#define PRCM_AVS_VOLTAGE		0
+#define PRCM_AVS_VOLTAGE_MASK		0x3f
+#define PRCM_AVS_ISSLOWSTARTUP		6
+#define PRCM_AVS_ISSLOWSTARTUP_MASK	(1 << PRCM_AVS_ISSLOWSTARTUP)
+#define PRCM_AVS_ISMODEENABLE		7
+#define PRCM_AVS_ISMODEENABLE_MASK	(1 << PRCM_AVS_ISMODEENABLE)
+
+#define PRCM_BOOT_STATUS	0xFFF
+#define PRCM_ROMCODE_A2P	0xFFE
+#define PRCM_ROMCODE_P2A	0xFFD
+#define PRCM_XP70_CUR_PWR_STATE 0xFFC      /* 4 BYTES */
+
+#define PRCM_SW_RST_REASON 0xFF8 /* 2 bytes */
+
+#define _PRCM_MBOX_HEADER		0xFE8 /* 16 bytes */
+#define PRCM_MBOX_HEADER_REQ_MB0	(_PRCM_MBOX_HEADER + 0x0)
+#define PRCM_MBOX_HEADER_REQ_MB1	(_PRCM_MBOX_HEADER + 0x1)
+#define PRCM_MBOX_HEADER_REQ_MB2	(_PRCM_MBOX_HEADER + 0x2)
+#define PRCM_MBOX_HEADER_REQ_MB3	(_PRCM_MBOX_HEADER + 0x3)
+#define PRCM_MBOX_HEADER_REQ_MB4	(_PRCM_MBOX_HEADER + 0x4)
+#define PRCM_MBOX_HEADER_REQ_MB5	(_PRCM_MBOX_HEADER + 0x5)
+#define PRCM_MBOX_HEADER_ACK_MB0	(_PRCM_MBOX_HEADER + 0x8)
+
+/* Req Mailboxes */
+#define PRCM_REQ_MB0 0xFDC /* 12 bytes  */
+#define PRCM_REQ_MB1 0xFD0 /* 12 bytes  */
+#define PRCM_REQ_MB2 0xFC0 /* 16 bytes  */
+#define PRCM_REQ_MB3 0xE4C /* 372 bytes  */
+#define PRCM_REQ_MB4 0xE48 /* 4 bytes  */
+#define PRCM_REQ_MB5 0xE44 /* 4 bytes  */
+
+/* Ack Mailboxes */
+#define PRCM_ACK_MB0 0xE08 /* 52 bytes  */
+#define PRCM_ACK_MB1 0xE04 /* 4 bytes */
+#define PRCM_ACK_MB2 0xE00 /* 4 bytes */
+#define PRCM_ACK_MB3 0xDFC /* 4 bytes */
+#define PRCM_ACK_MB4 0xDF8 /* 4 bytes */
+#define PRCM_ACK_MB5 0xDF4 /* 4 bytes */
+
+/* Mailbox 0 headers */
+#define MB0H_POWER_STATE_TRANS		0
+#define MB0H_CONFIG_WAKEUPS_EXE		1
+#define MB0H_READ_WAKEUP_ACK		3
+#define MB0H_CONFIG_WAKEUPS_SLEEP	4
+
+#define MB0H_WAKEUP_EXE 2
+#define MB0H_WAKEUP_SLEEP 5
+
+/* Mailbox 0 REQs */
+#define PRCM_REQ_MB0_AP_POWER_STATE	(PRCM_REQ_MB0 + 0x0)
+#define PRCM_REQ_MB0_AP_PLL_STATE	(PRCM_REQ_MB0 + 0x1)
+#define PRCM_REQ_MB0_ULP_CLOCK_STATE	(PRCM_REQ_MB0 + 0x2)
+#define PRCM_REQ_MB0_DO_NOT_WFI		(PRCM_REQ_MB0 + 0x3)
+#define PRCM_REQ_MB0_WAKEUP_8500	(PRCM_REQ_MB0 + 0x4)
+#define PRCM_REQ_MB0_WAKEUP_4500	(PRCM_REQ_MB0 + 0x8)
+
+/* Mailbox 0 ACKs */
+#define PRCM_ACK_MB0_AP_PWRSTTR_STATUS	(PRCM_ACK_MB0 + 0x0)
+#define PRCM_ACK_MB0_READ_POINTER	(PRCM_ACK_MB0 + 0x1)
+#define PRCM_ACK_MB0_WAKEUP_0_8500	(PRCM_ACK_MB0 + 0x4)
+#define PRCM_ACK_MB0_WAKEUP_0_4500	(PRCM_ACK_MB0 + 0x8)
+#define PRCM_ACK_MB0_WAKEUP_1_8500	(PRCM_ACK_MB0 + 0x1C)
+#define PRCM_ACK_MB0_WAKEUP_1_4500	(PRCM_ACK_MB0 + 0x20)
+#define PRCM_ACK_MB0_EVENT_4500_NUMBERS	20
+
+/* Mailbox 1 headers */
+#define MB1H_ARM_APE_OPP 0x0
+#define MB1H_RESET_MODEM 0x2
+#define MB1H_REQUEST_APE_OPP_100_VOLT 0x3
+#define MB1H_RELEASE_APE_OPP_100_VOLT 0x4
+#define MB1H_RELEASE_USB_WAKEUP 0x5
+
+/* Mailbox 1 Requests */
+#define PRCM_REQ_MB1_ARM_OPP			(PRCM_REQ_MB1 + 0x0)
+#define PRCM_REQ_MB1_APE_OPP			(PRCM_REQ_MB1 + 0x1)
+#define PRCM_REQ_MB1_APE_OPP_100_RESTORE	(PRCM_REQ_MB1 + 0x4)
+#define PRCM_REQ_MB1_ARM_OPP_100_RESTORE	(PRCM_REQ_MB1 + 0x8)
+
+/* Mailbox 1 ACKs */
+#define PRCM_ACK_MB1_CURRENT_ARM_OPP	(PRCM_ACK_MB1 + 0x0)
+#define PRCM_ACK_MB1_CURRENT_APE_OPP	(PRCM_ACK_MB1 + 0x1)
+#define PRCM_ACK_MB1_APE_VOLTAGE_STATUS	(PRCM_ACK_MB1 + 0x2)
+#define PRCM_ACK_MB1_DVFS_STATUS	(PRCM_ACK_MB1 + 0x3)
+
+/* Mailbox 2 headers */
+#define MB2H_DPS	0x0
+#define MB2H_AUTO_PWR	0x1
+
+/* Mailbox 2 REQs */
+#define PRCM_REQ_MB2_SVA_MMDSP		(PRCM_REQ_MB2 + 0x0)
+#define PRCM_REQ_MB2_SVA_PIPE		(PRCM_REQ_MB2 + 0x1)
+#define PRCM_REQ_MB2_SIA_MMDSP		(PRCM_REQ_MB2 + 0x2)
+#define PRCM_REQ_MB2_SIA_PIPE		(PRCM_REQ_MB2 + 0x3)
+#define PRCM_REQ_MB2_SGA		(PRCM_REQ_MB2 + 0x4)
+#define PRCM_REQ_MB2_B2R2_MCDE		(PRCM_REQ_MB2 + 0x5)
+#define PRCM_REQ_MB2_ESRAM12		(PRCM_REQ_MB2 + 0x6)
+#define PRCM_REQ_MB2_ESRAM34		(PRCM_REQ_MB2 + 0x7)
+#define PRCM_REQ_MB2_AUTO_PM_SLEEP	(PRCM_REQ_MB2 + 0x8)
+#define PRCM_REQ_MB2_AUTO_PM_IDLE	(PRCM_REQ_MB2 + 0xC)
+
+/* Mailbox 2 ACKs */
+#define PRCM_ACK_MB2_DPS_STATUS (PRCM_ACK_MB2 + 0x0)
+#define HWACC_PWR_ST_OK 0xFE
+
+/* Mailbox 3 headers */
+#define MB3H_ANC	0x0
+#define MB3H_SIDETONE	0x1
+#define MB3H_SYSCLK	0xE
+
+/* Mailbox 3 Requests */
+#define PRCM_REQ_MB3_ANC_FIR_COEFF	(PRCM_REQ_MB3 + 0x0)
+#define PRCM_REQ_MB3_ANC_IIR_COEFF	(PRCM_REQ_MB3 + 0x20)
+#define PRCM_REQ_MB3_ANC_SHIFTER	(PRCM_REQ_MB3 + 0x60)
+#define PRCM_REQ_MB3_ANC_WARP		(PRCM_REQ_MB3 + 0x64)
+#define PRCM_REQ_MB3_SIDETONE_FIR_GAIN	(PRCM_REQ_MB3 + 0x68)
+#define PRCM_REQ_MB3_SIDETONE_FIR_COEFF	(PRCM_REQ_MB3 + 0x6C)
+#define PRCM_REQ_MB3_SYSCLK_MGT		(PRCM_REQ_MB3 + 0x16C)
+
+/* Mailbox 4 headers */
+#define MB4H_DDR_INIT	0x0
+#define MB4H_MEM_ST	0x1
+#define MB4H_HOTDOG	0x12
+#define MB4H_HOTMON	0x13
+#define MB4H_HOT_PERIOD	0x14
+
+/* Mailbox 4 Requests */
+#define PRCM_REQ_MB4_DDR_ST_AP_SLEEP_IDLE	(PRCM_REQ_MB4 + 0x0)
+#define PRCM_REQ_MB4_DDR_ST_AP_DEEP_IDLE	(PRCM_REQ_MB4 + 0x1)
+#define PRCM_REQ_MB4_ESRAM0_ST			(PRCM_REQ_MB4 + 0x3)
+#define PRCM_REQ_MB4_HOTDOG_THRESHOLD		(PRCM_REQ_MB4 + 0x0)
+#define PRCM_REQ_MB4_HOTMON_LOW			(PRCM_REQ_MB4 + 0x0)
+#define PRCM_REQ_MB4_HOTMON_HIGH		(PRCM_REQ_MB4 + 0x1)
+#define PRCM_REQ_MB4_HOTMON_CONFIG		(PRCM_REQ_MB4 + 0x2)
+#define PRCM_REQ_MB4_HOT_PERIOD			(PRCM_REQ_MB4 + 0x0)
+#define HOTMON_CONFIG_LOW			BIT(0)
+#define HOTMON_CONFIG_HIGH			BIT(1)
+
+/* Mailbox 5 Requests */
+#define PRCM_REQ_MB5_I2C_SLAVE_OP	(PRCM_REQ_MB5 + 0x0)
+#define PRCM_REQ_MB5_I2C_HW_BITS	(PRCM_REQ_MB5 + 0x1)
+#define PRCM_REQ_MB5_I2C_REG		(PRCM_REQ_MB5 + 0x2)
+#define PRCM_REQ_MB5_I2C_VAL		(PRCM_REQ_MB5 + 0x3)
+#define PRCMU_I2C_WRITE(slave) \
+	(((slave) << 1) | (cpu_is_u8500v2() ? BIT(6) : 0))
+#define PRCMU_I2C_READ(slave) \
+	(((slave) << 1) | BIT(0) | (cpu_is_u8500v2() ? BIT(6) : 0))
+#define PRCMU_I2C_STOP_EN		BIT(3)
+
+/* Mailbox 5 ACKs */
+#define PRCM_ACK_MB5_I2C_STATUS	(PRCM_ACK_MB5 + 0x1)
+#define PRCM_ACK_MB5_I2C_VAL	(PRCM_ACK_MB5 + 0x3)
+#define I2C_WR_OK 0x1
+#define I2C_RD_OK 0x2
+
+#define NUM_MB 8
+#define MBOX_BIT BIT
+#define ALL_MBOX_BITS (MBOX_BIT(NUM_MB) - 1)
+
+/*
+ * Wakeups/IRQs
+ */
+
+#define WAKEUP_BIT_RTC BIT(0)
+#define WAKEUP_BIT_RTT0 BIT(1)
+#define WAKEUP_BIT_RTT1 BIT(2)
+#define WAKEUP_BIT_HSI0 BIT(3)
+#define WAKEUP_BIT_HSI1 BIT(4)
+#define WAKEUP_BIT_CA_WAKE BIT(5)
+#define WAKEUP_BIT_USB BIT(6)
+#define WAKEUP_BIT_ABB BIT(7)
+#define WAKEUP_BIT_ABB_FIFO BIT(8)
+#define WAKEUP_BIT_SYSCLK_OK BIT(9)
+#define WAKEUP_BIT_CA_SLEEP BIT(10)
+#define WAKEUP_BIT_AC_WAKE_ACK BIT(11)
+#define WAKEUP_BIT_SIDE_TONE_OK BIT(12)
+#define WAKEUP_BIT_ANC_OK BIT(13)
+#define WAKEUP_BIT_SW_ERROR BIT(14)
+#define WAKEUP_BIT_AC_SLEEP_ACK BIT(15)
+#define WAKEUP_BIT_ARM BIT(17)
+#define WAKEUP_BIT_HOTMON_LOW BIT(18)
+#define WAKEUP_BIT_HOTMON_HIGH BIT(19)
+#define WAKEUP_BIT_MODEM_SW_RESET_REQ BIT(20)
+#define WAKEUP_BIT_GPIO0 BIT(23)
+#define WAKEUP_BIT_GPIO1 BIT(24)
+#define WAKEUP_BIT_GPIO2 BIT(25)
+#define WAKEUP_BIT_GPIO3 BIT(26)
+#define WAKEUP_BIT_GPIO4 BIT(27)
+#define WAKEUP_BIT_GPIO5 BIT(28)
+#define WAKEUP_BIT_GPIO6 BIT(29)
+#define WAKEUP_BIT_GPIO7 BIT(30)
+#define WAKEUP_BIT_GPIO8 BIT(31)
+
+/*
+ * This vector maps irq numbers to the bits in the bit field used in
+ * communication with the PRCMU firmware.
+ *
+ * The reason for having this is to keep the irq numbers contiguous even though
+ * the bits in the bit field are not. (The bits also have a tendency to move
+ * around, to further complicate matters.)
+ */
+#define IRQ_INDEX(_name) ((IRQ_PRCMU_##_name) - IRQ_PRCMU_BASE)
+#define IRQ_ENTRY(_name)[IRQ_INDEX(_name)] = (WAKEUP_BIT_##_name)
+static u32 prcmu_irq_bit[NUM_PRCMU_WAKEUPS] = {
+	IRQ_ENTRY(RTC),
+	IRQ_ENTRY(RTT0),
+	IRQ_ENTRY(RTT1),
+	IRQ_ENTRY(HSI0),
+	IRQ_ENTRY(HSI1),
+	IRQ_ENTRY(CA_WAKE),
+	IRQ_ENTRY(USB),
+	IRQ_ENTRY(ABB),
+	IRQ_ENTRY(ABB_FIFO),
+	IRQ_ENTRY(CA_SLEEP),
+	IRQ_ENTRY(ARM),
+	IRQ_ENTRY(HOTMON_LOW),
+	IRQ_ENTRY(HOTMON_HIGH),
+	IRQ_ENTRY(MODEM_SW_RESET_REQ),
+	IRQ_ENTRY(GPIO0),
+	IRQ_ENTRY(GPIO1),
+	IRQ_ENTRY(GPIO2),
+	IRQ_ENTRY(GPIO3),
+	IRQ_ENTRY(GPIO4),
+	IRQ_ENTRY(GPIO5),
+	IRQ_ENTRY(GPIO6),
+	IRQ_ENTRY(GPIO7),
+	IRQ_ENTRY(GPIO8)
+};
+
+#define VALID_WAKEUPS (BIT(NUM_PRCMU_WAKEUP_INDICES) - 1)
+#define WAKEUP_ENTRY(_name)[PRCMU_WAKEUP_INDEX_##_name] = (WAKEUP_BIT_##_name)
+static u32 prcmu_wakeup_bit[NUM_PRCMU_WAKEUP_INDICES] = {
+	WAKEUP_ENTRY(RTC),
+	WAKEUP_ENTRY(RTT0),
+	WAKEUP_ENTRY(RTT1),
+	WAKEUP_ENTRY(HSI0),
+	WAKEUP_ENTRY(HSI1),
+	WAKEUP_ENTRY(USB),
+	WAKEUP_ENTRY(ABB),
+	WAKEUP_ENTRY(ABB_FIFO),
+	WAKEUP_ENTRY(ARM)
+};
+
+/*
+ * mb0_transfer - state needed for mailbox 0 communication.
+ * @lock:		The transaction lock.
+ * @dbb_events_lock:	A lock used to handle concurrent access to (parts of)
+ *			the request data.
+ * @mask_work:		Work structure used for (un)masking wakeup interrupts.
+ * @req:		Request data that need to persist between requests.
+ */
+static struct {
+	spinlock_t lock;
+	spinlock_t dbb_irqs_lock;
+	struct work_struct mask_work;
+	struct mutex ac_wake_lock;
+	struct completion ac_wake_work;
+	struct {
+		u32 dbb_irqs;
+		u32 dbb_wakeups;
+		u32 abb_events;
+	} req;
+} mb0_transfer;
+
+/*
+ * mb1_transfer - state needed for mailbox 1 communication.
+ * @lock:	The transaction lock.
+ * @work:	The transaction completion structure.
+ * @ack:	Reply ("acknowledge") data.
+ */
+static struct {
+	struct mutex lock;
+	struct completion work;
+	struct {
+		u8 header;
+		u8 arm_opp;
+		u8 ape_opp;
+		u8 ape_voltage_status;
+	} ack;
+} mb1_transfer;
+
+/*
+ * mb2_transfer - state needed for mailbox 2 communication.
+ * @lock:            The transaction lock.
+ * @work:            The transaction completion structure.
+ * @auto_pm_lock:    The autonomous power management configuration lock.
+ * @auto_pm_enabled: A flag indicating whether autonomous PM is enabled.
+ * @req:             Request data that need to persist between requests.
+ * @ack:             Reply ("acknowledge") data.
+ */
+static struct {
+	struct mutex lock;
+	struct completion work;
+	spinlock_t auto_pm_lock;
+	bool auto_pm_enabled;
+	struct {
+		u8 status;
+	} ack;
+} mb2_transfer;
+
+/*
+ * mb3_transfer - state needed for mailbox 3 communication.
+ * @lock:		The request lock.
+ * @sysclk_lock:	A lock used to handle concurrent sysclk requests.
+ * @sysclk_work:	Work structure used for sysclk requests.
+ */
+static struct {
+	spinlock_t lock;
+	struct mutex sysclk_lock;
+	struct completion sysclk_work;
+} mb3_transfer;
+
+/*
+ * mb4_transfer - state needed for mailbox 4 communication.
+ * @lock:	The transaction lock.
+ * @work:	The transaction completion structure.
+ */
+static struct {
+	struct mutex lock;
+	struct completion work;
+} mb4_transfer;
+
+/*
+ * mb5_transfer - state needed for mailbox 5 communication.
+ * @lock:	The transaction lock.
+ * @work:	The transaction completion structure.
+ * @ack:	Reply ("acknowledge") data.
+ */
+static struct {
+	struct mutex lock;
+	struct completion work;
+	struct {
+		u8 status;
+		u8 value;
+	} ack;
+} mb5_transfer;
+
+static atomic_t ac_wake_req_state = ATOMIC_INIT(0);
+
+/* Spinlocks */
+static DEFINE_SPINLOCK(clkout_lock);
+static DEFINE_SPINLOCK(gpiocr_lock);
+
+/* Global var to runtime determine TCDM base for v2 or v1 */
+static __iomem void *tcdm_base;
+
+struct clk_mgt {
+	unsigned int offset;
+	u32 pllsw;
+};
+
+static DEFINE_SPINLOCK(clk_mgt_lock);
+
+#define CLK_MGT_ENTRY(_name)[PRCMU_##_name] = { (PRCM_##_name##_MGT), 0 }
+struct clk_mgt clk_mgt[PRCMU_NUM_REG_CLOCKS] = {
+	CLK_MGT_ENTRY(SGACLK),
+	CLK_MGT_ENTRY(UARTCLK),
+	CLK_MGT_ENTRY(MSP02CLK),
+	CLK_MGT_ENTRY(MSP1CLK),
+	CLK_MGT_ENTRY(I2CCLK),
+	CLK_MGT_ENTRY(SDMMCCLK),
+	CLK_MGT_ENTRY(SLIMCLK),
+	CLK_MGT_ENTRY(PER1CLK),
+	CLK_MGT_ENTRY(PER2CLK),
+	CLK_MGT_ENTRY(PER3CLK),
+	CLK_MGT_ENTRY(PER5CLK),
+	CLK_MGT_ENTRY(PER6CLK),
+	CLK_MGT_ENTRY(PER7CLK),
+	CLK_MGT_ENTRY(LCDCLK),
+	CLK_MGT_ENTRY(BMLCLK),
+	CLK_MGT_ENTRY(HSITXCLK),
+	CLK_MGT_ENTRY(HSIRXCLK),
+	CLK_MGT_ENTRY(HDMICLK),
+	CLK_MGT_ENTRY(APEATCLK),
+	CLK_MGT_ENTRY(APETRACECLK),
+	CLK_MGT_ENTRY(MCDECLK),
+	CLK_MGT_ENTRY(IPI2CCLK),
+	CLK_MGT_ENTRY(DSIALTCLK),
+	CLK_MGT_ENTRY(DMACLK),
+	CLK_MGT_ENTRY(B2R2CLK),
+	CLK_MGT_ENTRY(TVCLK),
+	CLK_MGT_ENTRY(SSPCLK),
+	CLK_MGT_ENTRY(RNGCLK),
+	CLK_MGT_ENTRY(UICCCLK),
+};
+
+/*
+* Used by MCDE to setup all necessary PRCMU registers
+*/
+#define PRCMU_RESET_DSIPLL		0x00004000
+#define PRCMU_UNCLAMP_DSIPLL		0x00400800
+
+#define PRCMU_CLK_PLL_DIV_SHIFT		0
+#define PRCMU_CLK_PLL_SW_SHIFT		5
+#define PRCMU_CLK_38			(1 << 9)
+#define PRCMU_CLK_38_SRC		(1 << 10)
+#define PRCMU_CLK_38_DIV		(1 << 11)
+
+/* PLLDIV=12, PLLSW=4 (PLLDDR) */
+#define PRCMU_DSI_CLOCK_SETTING		0x0000008C
+
+/* PLLDIV=8, PLLSW=4 (PLLDDR) */
+#define PRCMU_DSI_CLOCK_SETTING_U8400	0x00000088
+
+/* DPI 50000000 Hz */
+#define PRCMU_DPI_CLOCK_SETTING		((1 << PRCMU_CLK_PLL_SW_SHIFT) | \
+					  (16 << PRCMU_CLK_PLL_DIV_SHIFT))
+#define PRCMU_DSI_LP_CLOCK_SETTING	0x00000E00
+
+/* D=101, N=1, R=4, SELDIV2=0 */
+#define PRCMU_PLLDSI_FREQ_SETTING	0x00040165
+
+/* D=70, N=1, R=3, SELDIV2=0 */
+#define PRCMU_PLLDSI_FREQ_SETTING_U8400	0x00030146
+
+#define PRCMU_ENABLE_PLLDSI		0x00000001
+#define PRCMU_DISABLE_PLLDSI		0x00000000
+#define PRCMU_RELEASE_RESET_DSS		0x0000400C
+#define PRCMU_DSI_PLLOUT_SEL_SETTING	0x00000202
+/* ESC clk, div0=1, div1=1, div2=3 */
+#define PRCMU_ENABLE_ESCAPE_CLOCK_DIV	0x07030101
+#define PRCMU_DISABLE_ESCAPE_CLOCK_DIV	0x00030101
+#define PRCMU_DSI_RESET_SW		0x00000007
+
+#define PRCMU_PLLDSI_LOCKP_LOCKED	0x3
+
+static struct {
+	u8 project_number;
+	u8 api_version;
+	u8 func_version;
+	u8 errata;
+} prcmu_version;
+
+
+int prcmu_enable_dsipll(void)
+{
+	int i;
+	unsigned int plldsifreq;
+
+	/* Clear DSIPLL_RESETN */
+	writel(PRCMU_RESET_DSIPLL, (_PRCMU_BASE + PRCM_APE_RESETN_CLR));
+	/* Unclamp DSIPLL in/out */
+	writel(PRCMU_UNCLAMP_DSIPLL, (_PRCMU_BASE + PRCM_MMIP_LS_CLAMP_CLR));
+
+	if (prcmu_is_u8400())
+		plldsifreq = PRCMU_PLLDSI_FREQ_SETTING_U8400;
+	else
+		plldsifreq = PRCMU_PLLDSI_FREQ_SETTING;
+	/* Set DSI PLL FREQ */
+	writel(plldsifreq, (_PRCMU_BASE + PRCM_PLLDSI_FREQ));
+	writel(PRCMU_DSI_PLLOUT_SEL_SETTING,
+		(_PRCMU_BASE + PRCM_DSI_PLLOUT_SEL));
+	/* Enable Escape clocks */
+	writel(PRCMU_ENABLE_ESCAPE_CLOCK_DIV,
+					(_PRCMU_BASE + PRCM_DSITVCLK_DIV));
+
+	/* Start DSI PLL */
+	writel(PRCMU_ENABLE_PLLDSI, (_PRCMU_BASE + PRCM_PLLDSI_ENABLE));
+	/* Reset DSI PLL */
+	writel(PRCMU_DSI_RESET_SW, (_PRCMU_BASE + PRCM_DSI_SW_RESET));
+	for (i = 0; i < 10; i++) {
+		if ((readl(_PRCMU_BASE + PRCM_PLLDSI_LOCKP) &
+			PRCMU_PLLDSI_LOCKP_LOCKED)
+					== PRCMU_PLLDSI_LOCKP_LOCKED)
+			break;
+		udelay(100);
+	}
+	/* Set DSIPLL_RESETN */
+	writel(PRCMU_RESET_DSIPLL, (_PRCMU_BASE + PRCM_APE_RESETN_SET));
+	return 0;
+}
+
+int prcmu_disable_dsipll(void)
+{
+	/* Disable dsi pll */
+	writel(PRCMU_DISABLE_PLLDSI, (_PRCMU_BASE + PRCM_PLLDSI_ENABLE));
+	/* Disable  escapeclock */
+	writel(PRCMU_DISABLE_ESCAPE_CLOCK_DIV,
+					(_PRCMU_BASE + PRCM_DSITVCLK_DIV));
+	return 0;
+}
+
+int prcmu_set_display_clocks(void)
+{
+	unsigned long flags;
+	unsigned int dsiclk;
+
+	if (prcmu_is_u8400())
+		dsiclk = PRCMU_DSI_CLOCK_SETTING_U8400;
+	else
+		dsiclk = PRCMU_DSI_CLOCK_SETTING;
+
+	spin_lock_irqsave(&clk_mgt_lock, flags);
+
+	/* Grab the HW semaphore. */
+	while ((readl(_PRCMU_BASE + PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
+		cpu_relax();
+
+	writel(dsiclk, (_PRCMU_BASE + PRCM_HDMICLK_MGT));
+	writel(PRCMU_DSI_LP_CLOCK_SETTING, (_PRCMU_BASE + PRCM_TVCLK_MGT));
+	writel(PRCMU_DPI_CLOCK_SETTING, (_PRCMU_BASE + PRCM_LCDCLK_MGT));
+
+	/* Release the HW semaphore. */
+	writel(0, (_PRCMU_BASE + PRCM_SEM));
+
+	spin_unlock_irqrestore(&clk_mgt_lock, flags);
+
+	return 0;
+}
+
+/**
+ * prcmu_enable_spi2 - Enables pin muxing for SPI2 on OtherAlternateC1.
+ */
+void prcmu_enable_spi2(void)
+{
+	u32 reg;
+	unsigned long flags;
+
+	spin_lock_irqsave(&gpiocr_lock, flags);
+	reg = readl(_PRCMU_BASE + PRCM_GPIOCR);
+	writel(reg | PRCM_GPIOCR_SPI2_SELECT, _PRCMU_BASE + PRCM_GPIOCR);
+	spin_unlock_irqrestore(&gpiocr_lock, flags);
+}
+
+/**
+ * prcmu_disable_spi2 - Disables pin muxing for SPI2 on OtherAlternateC1.
+ */
+void prcmu_disable_spi2(void)
+{
+	u32 reg;
+	unsigned long flags;
+
+	spin_lock_irqsave(&gpiocr_lock, flags);
+	reg = readl(_PRCMU_BASE + PRCM_GPIOCR);
+	writel(reg & ~PRCM_GPIOCR_SPI2_SELECT, _PRCMU_BASE + PRCM_GPIOCR);
+	spin_unlock_irqrestore(&gpiocr_lock, flags);
+}
+
+bool prcmu_has_arm_maxopp(void)
+{
+	return (readb(tcdm_base + PRCM_AVS_VARM_MAX_OPP) &
+		PRCM_AVS_ISMODEENABLE_MASK) == PRCM_AVS_ISMODEENABLE_MASK;
+}
+
+bool prcmu_is_u8400(void)
+{
+	return prcmu_version.project_number == PRCMU_PROJECT_ID_8400V2_0;
+}
+
+/**
+ * prcmu_get_boot_status - PRCMU boot status checking
+ * Returns: the current PRCMU boot status
+ */
+int prcmu_get_boot_status(void)
+{
+	return readb(tcdm_base + PRCM_BOOT_STATUS);
+}
+
+/**
+ * prcmu_set_rc_a2p - This function is used to run few power state sequences
+ * @val: Value to be set, i.e. transition requested
+ * Returns: 0 on success, -EINVAL on invalid argument
+ *
+ * This function is used to run the following power state sequences -
+ * any state to ApReset,  ApDeepSleep to ApExecute, ApExecute to ApDeepSleep
+ */
+int prcmu_set_rc_a2p(enum romcode_write val)
+{
+	if (val < RDY_2_DS || val > RDY_2_XP70_RST)
+		return -EINVAL;
+	writeb(val, (tcdm_base + PRCM_ROMCODE_A2P));
+	return 0;
+}
+
+/**
+ * prcmu_get_rc_p2a - This function is used to get power state sequences
+ * Returns: the power transition that has last happened
+ *
+ * This function can return the following transitions-
+ * any state to ApReset,  ApDeepSleep to ApExecute, ApExecute to ApDeepSleep
+ */
+enum romcode_read prcmu_get_rc_p2a(void)
+{
+	return readb(tcdm_base + PRCM_ROMCODE_P2A);
+}
+
+/**
+ * prcmu_get_current_mode - Return the current XP70 power mode
+ * Returns: Returns the current AP(ARM) power mode: init,
+ * apBoot, apExecute, apDeepSleep, apSleep, apIdle, apReset
+ */
+enum ap_pwrst prcmu_get_xp70_current_state(void)
+{
+	return readb(tcdm_base + PRCM_XP70_CUR_PWR_STATE);
+}
+
+/**
+ * prcmu_config_clkout - Configure one of the programmable clock outputs.
+ * @clkout:	The CLKOUT number (0 or 1).
+ * @source:	The clock to be used (one of the PRCMU_CLKSRC_*).
+ * @div:	The divider to be applied.
+ *
+ * Configures one of the programmable clock outputs (CLKOUTs).
+ * @div should be in the range [1,63] to request a configuration, or 0 to
+ * inform that the configuration is no longer requested.
+ */
+int prcmu_config_clkout(u8 clkout, u8 source, u8 div)
+{
+	static int requests[2];
+	int r = 0;
+	unsigned long flags;
+	u32 val;
+	u32 bits;
+	u32 mask;
+	u32 div_mask;
+
+	BUG_ON(clkout > 1);
+	BUG_ON(div > 63);
+	BUG_ON((clkout == 0) && (source > PRCMU_CLKSRC_CLK009));
+
+	if (!div && !requests[clkout])
+		return -EINVAL;
+
+	switch (clkout) {
+	case 0:
+		div_mask = PRCM_CLKOCR_CLKODIV0_MASK;
+		mask = (PRCM_CLKOCR_CLKODIV0_MASK | PRCM_CLKOCR_CLKOSEL0_MASK);
+		bits = ((source << PRCM_CLKOCR_CLKOSEL0_SHIFT) |
+			(div << PRCM_CLKOCR_CLKODIV0_SHIFT));
+		break;
+	case 1:
+		div_mask = PRCM_CLKOCR_CLKODIV1_MASK;
+		mask = (PRCM_CLKOCR_CLKODIV1_MASK | PRCM_CLKOCR_CLKOSEL1_MASK |
+			PRCM_CLKOCR_CLK1TYPE);
+		bits = ((source << PRCM_CLKOCR_CLKOSEL1_SHIFT) |
+			(div << PRCM_CLKOCR_CLKODIV1_SHIFT));
+		break;
+	}
+	bits &= mask;
+
+	spin_lock_irqsave(&clkout_lock, flags);
+
+	val = readl(_PRCMU_BASE + PRCM_CLKOCR);
+	if (val & div_mask) {
+		if (div) {
+			if ((val & mask) != bits) {
+				r = -EBUSY;
+				goto unlock_and_return;
+			}
+		} else {
+			if ((val & mask & ~div_mask) != bits) {
+				r = -EINVAL;
+				goto unlock_and_return;
+			}
+		}
+	}
+	writel((bits | (val & ~mask)), (_PRCMU_BASE + PRCM_CLKOCR));
+	requests[clkout] += (div ? 1 : -1);
+
+unlock_and_return:
+	spin_unlock_irqrestore(&clkout_lock, flags);
+
+	return r;
+}
+
+int prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll)
+{
+	unsigned long flags;
+
+	BUG_ON((state < PRCMU_AP_SLEEP) || (PRCMU_AP_DEEP_IDLE < state));
+
+	spin_lock_irqsave(&mb0_transfer.lock, flags);
+
+	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
+		cpu_relax();
+
+	writeb(MB0H_POWER_STATE_TRANS, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB0));
+	writeb(state, (tcdm_base + PRCM_REQ_MB0_AP_POWER_STATE));
+	writeb((keep_ap_pll ? 1 : 0), (tcdm_base + PRCM_REQ_MB0_AP_PLL_STATE));
+	writeb((keep_ulp_clk ? 1 : 0),
+		(tcdm_base + PRCM_REQ_MB0_ULP_CLOCK_STATE));
+	writeb(0, (tcdm_base + PRCM_REQ_MB0_DO_NOT_WFI));
+	writel(MBOX_BIT(0), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+
+	spin_unlock_irqrestore(&mb0_transfer.lock, flags);
+
+	return 0;
+}
+
+/* This function should only be called while mb0_transfer.lock is held. */
+static void config_wakeups(void)
+{
+	const u8 header[2] = {
+		MB0H_CONFIG_WAKEUPS_EXE,
+		MB0H_CONFIG_WAKEUPS_SLEEP
+	};
+	static u32 last_dbb_events;
+	static u32 last_abb_events;
+	u32 dbb_events;
+	u32 abb_events;
+	unsigned int i;
+
+	dbb_events = mb0_transfer.req.dbb_irqs | mb0_transfer.req.dbb_wakeups;
+	dbb_events |= (WAKEUP_BIT_AC_WAKE_ACK | WAKEUP_BIT_AC_SLEEP_ACK);
+
+	abb_events = mb0_transfer.req.abb_events;
+
+	if ((dbb_events == last_dbb_events) && (abb_events == last_abb_events))
+		return;
+
+	for (i = 0; i < 2; i++) {
+		while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
+			cpu_relax();
+		writel(dbb_events, (tcdm_base + PRCM_REQ_MB0_WAKEUP_8500));
+		writel(abb_events, (tcdm_base + PRCM_REQ_MB0_WAKEUP_4500));
+		writeb(header[i], (tcdm_base + PRCM_MBOX_HEADER_REQ_MB0));
+		writel(MBOX_BIT(0), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	}
+	last_dbb_events = dbb_events;
+	last_abb_events = abb_events;
+}
+
+void prcmu_enable_wakeups(u32 wakeups)
+{
+	unsigned long flags;
+	u32 bits;
+	int i;
+
+	BUG_ON(wakeups != (wakeups & VALID_WAKEUPS));
+
+	for (i = 0, bits = 0; i < NUM_PRCMU_WAKEUP_INDICES; i++) {
+		if (wakeups & BIT(i))
+			bits |= prcmu_wakeup_bit[i];
+	}
+
+	spin_lock_irqsave(&mb0_transfer.lock, flags);
+
+	mb0_transfer.req.dbb_wakeups = bits;
+	config_wakeups();
+
+	spin_unlock_irqrestore(&mb0_transfer.lock, flags);
+}
+
+void prcmu_config_abb_event_readout(u32 abb_events)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&mb0_transfer.lock, flags);
+
+	mb0_transfer.req.abb_events = abb_events;
+	config_wakeups();
+
+	spin_unlock_irqrestore(&mb0_transfer.lock, flags);
+}
+
+void prcmu_get_abb_event_buffer(void __iomem **buf)
+{
+	if (readb(tcdm_base + PRCM_ACK_MB0_READ_POINTER) & 1)
+		*buf = (tcdm_base + PRCM_ACK_MB0_WAKEUP_1_4500);
+	else
+		*buf = (tcdm_base + PRCM_ACK_MB0_WAKEUP_0_4500);
+}
+
+/**
+ * prcmu_set_arm_opp - set the appropriate ARM OPP
+ * @opp: The new ARM operating point to which transition is to be made
+ * Returns: 0 on success, non-zero on failure
+ *
+ * This function sets the the operating point of the ARM.
+ */
+int prcmu_set_arm_opp(u8 opp)
+{
+	int r;
+
+	if (opp < ARM_NO_CHANGE || opp > ARM_EXTCLK)
+		return -EINVAL;
+
+	r = 0;
+
+	mutex_lock(&mb1_transfer.lock);
+
+	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
+		cpu_relax();
+
+	writeb(MB1H_ARM_APE_OPP, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
+	writeb(opp, (tcdm_base + PRCM_REQ_MB1_ARM_OPP));
+	writeb(APE_NO_CHANGE, (tcdm_base + PRCM_REQ_MB1_APE_OPP));
+
+	writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	wait_for_completion(&mb1_transfer.work);
+
+	if ((mb1_transfer.ack.header != MB1H_ARM_APE_OPP) ||
+		(mb1_transfer.ack.arm_opp != opp))
+		r = -EIO;
+
+	mutex_unlock(&mb1_transfer.lock);
+
+	return r;
+}
+
+/**
+ * prcmu_get_arm_opp - get the current ARM OPP
+ *
+ * Returns: the current ARM OPP
+ */
+int prcmu_get_arm_opp(void)
+{
+	return readb(tcdm_base + PRCM_ACK_MB1_CURRENT_ARM_OPP);
+}
+
+/**
+ * prcmu_get_ddr_opp - get the current DDR OPP
+ *
+ * Returns: the current DDR OPP
+ */
+int prcmu_get_ddr_opp(void)
+{
+	return readb(_PRCMU_BASE + PRCM_DDR_SUBSYS_APE_MINBW);
+}
+
+/**
+ * set_ddr_opp - set the appropriate DDR OPP
+ * @opp: The new DDR operating point to which transition is to be made
+ * Returns: 0 on success, non-zero on failure
+ *
+ * This function sets the operating point of the DDR.
+ */
+int prcmu_set_ddr_opp(u8 opp)
+{
+	if (opp < DDR_100_OPP || opp > DDR_25_OPP)
+		return -EINVAL;
+	/* Changing the DDR OPP can hang the hardware pre-v21 */
+	if (cpu_is_u8500v20_or_later() && !cpu_is_u8500v20())
+		writeb(opp, (_PRCMU_BASE + PRCM_DDR_SUBSYS_APE_MINBW));
+
+	return 0;
+}
+/**
+ * set_ape_opp - set the appropriate APE OPP
+ * @opp: The new APE operating point to which transition is to be made
+ * Returns: 0 on success, non-zero on failure
+ *
+ * This function sets the operating point of the APE.
+ */
+int prcmu_set_ape_opp(u8 opp)
+{
+	int r = 0;
+
+	mutex_lock(&mb1_transfer.lock);
+
+	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
+		cpu_relax();
+
+	writeb(MB1H_ARM_APE_OPP, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
+	writeb(ARM_NO_CHANGE, (tcdm_base + PRCM_REQ_MB1_ARM_OPP));
+	writeb(opp, (tcdm_base + PRCM_REQ_MB1_APE_OPP));
+
+	writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	wait_for_completion(&mb1_transfer.work);
+
+	if ((mb1_transfer.ack.header != MB1H_ARM_APE_OPP) ||
+		(mb1_transfer.ack.ape_opp != opp))
+		r = -EIO;
+
+	mutex_unlock(&mb1_transfer.lock);
+
+	return r;
+}
+
+/**
+ * prcmu_get_ape_opp - get the current APE OPP
+ *
+ * Returns: the current APE OPP
+ */
+int prcmu_get_ape_opp(void)
+{
+	return readb(tcdm_base + PRCM_ACK_MB1_CURRENT_APE_OPP);
+}
+
+/**
+ * prcmu_request_ape_opp_100_voltage - Request APE OPP 100% voltage
+ * @enable: true to request the higher voltage, false to drop a request.
+ *
+ * Calls to this function to enable and disable requests must be balanced.
+ */
+int prcmu_request_ape_opp_100_voltage(bool enable)
+{
+	int r = 0;
+	u8 header;
+	static unsigned int requests;
+
+	mutex_lock(&mb1_transfer.lock);
+
+	if (enable) {
+		if (0 != requests++)
+			goto unlock_and_return;
+		header = MB1H_REQUEST_APE_OPP_100_VOLT;
+	} else {
+		if (requests == 0) {
+			r = -EIO;
+			goto unlock_and_return;
+		} else if (1 != requests--) {
+			goto unlock_and_return;
+		}
+		header = MB1H_RELEASE_APE_OPP_100_VOLT;
+	}
+
+	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
+		cpu_relax();
+
+	writeb(header, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
+
+	writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	wait_for_completion(&mb1_transfer.work);
+
+	if ((mb1_transfer.ack.header != header) ||
+		((mb1_transfer.ack.ape_voltage_status & BIT(0)) != 0))
+		r = -EIO;
+
+unlock_and_return:
+	mutex_unlock(&mb1_transfer.lock);
+
+	return r;
+}
+
+/**
+ * prcmu_release_usb_wakeup_state - release the state required by a USB wakeup
+ *
+ * This function releases the power state requirements of a USB wakeup.
+ */
+int prcmu_release_usb_wakeup_state(void)
+{
+	int r = 0;
+
+	mutex_lock(&mb1_transfer.lock);
+
+	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
+		cpu_relax();
+
+	writeb(MB1H_RELEASE_USB_WAKEUP,
+		(tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
+
+	writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	wait_for_completion(&mb1_transfer.work);
+
+	if ((mb1_transfer.ack.header != MB1H_RELEASE_USB_WAKEUP) ||
+		((mb1_transfer.ack.ape_voltage_status & BIT(0)) != 0))
+		r = -EIO;
+
+	mutex_unlock(&mb1_transfer.lock);
+
+	return r;
+}
+
+/**
+ * prcmu_set_epod - set the state of a EPOD (power domain)
+ * @epod_id: The EPOD to set
+ * @epod_state: The new EPOD state
+ *
+ * This function sets the state of a EPOD (power domain). It may not be called
+ * from interrupt context.
+ */
+int prcmu_set_epod(u16 epod_id, u8 epod_state)
+{
+	int r = 0;
+	bool ram_retention = false;
+	int i;
+
+	/* check argument */
+	BUG_ON(epod_id >= NUM_EPOD_ID);
+
+	/* set flag if retention is possible */
+	switch (epod_id) {
+	case EPOD_ID_SVAMMDSP:
+	case EPOD_ID_SIAMMDSP:
+	case EPOD_ID_ESRAM12:
+	case EPOD_ID_ESRAM34:
+		ram_retention = true;
+		break;
+	}
+
+	/* check argument */
+	BUG_ON(epod_state > EPOD_STATE_ON);
+	BUG_ON(epod_state == EPOD_STATE_RAMRET && !ram_retention);
+
+	/* get lock */
+	mutex_lock(&mb2_transfer.lock);
+
+	/* wait for mailbox */
+	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(2))
+		cpu_relax();
+
+	/* fill in mailbox */
+	for (i = 0; i < NUM_EPOD_ID; i++)
+		writeb(EPOD_STATE_NO_CHANGE, (tcdm_base + PRCM_REQ_MB2 + i));
+	writeb(epod_state, (tcdm_base + PRCM_REQ_MB2 + epod_id));
+
+	writeb(MB2H_DPS, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB2));
+
+	writel(MBOX_BIT(2), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+
+	/*
+	 * The current firmware version does not handle errors correctly,
+	 * and we cannot recover if there is an error.
+	 * This is expected to change when the firmware is updated.
+	 */
+	if (!wait_for_completion_timeout(&mb2_transfer.work,
+			msecs_to_jiffies(20000))) {
+		pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n",
+			__func__);
+		r = -EIO;
+		goto unlock_and_return;
+	}
+
+	if (mb2_transfer.ack.status != HWACC_PWR_ST_OK)
+		r = -EIO;
+
+unlock_and_return:
+	mutex_unlock(&mb2_transfer.lock);
+	return r;
+}
+
+/**
+ * prcmu_configure_auto_pm - Configure autonomous power management.
+ * @sleep: Configuration for ApSleep.
+ * @idle:  Configuration for ApIdle.
+ */
+void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep,
+	struct prcmu_auto_pm_config *idle)
+{
+	u32 sleep_cfg;
+	u32 idle_cfg;
+	unsigned long flags;
+
+	BUG_ON((sleep == NULL) || (idle == NULL));
+
+	sleep_cfg = (sleep->sva_auto_pm_enable & 0xF);
+	sleep_cfg = ((sleep_cfg << 4) | (sleep->sia_auto_pm_enable & 0xF));
+	sleep_cfg = ((sleep_cfg << 8) | (sleep->sva_power_on & 0xFF));
+	sleep_cfg = ((sleep_cfg << 8) | (sleep->sia_power_on & 0xFF));
+	sleep_cfg = ((sleep_cfg << 4) | (sleep->sva_policy & 0xF));
+	sleep_cfg = ((sleep_cfg << 4) | (sleep->sia_policy & 0xF));
+
+	idle_cfg = (idle->sva_auto_pm_enable & 0xF);
+	idle_cfg = ((idle_cfg << 4) | (idle->sia_auto_pm_enable & 0xF));
+	idle_cfg = ((idle_cfg << 8) | (idle->sva_power_on & 0xFF));
+	idle_cfg = ((idle_cfg << 8) | (idle->sia_power_on & 0xFF));
+	idle_cfg = ((idle_cfg << 4) | (idle->sva_policy & 0xF));
+	idle_cfg = ((idle_cfg << 4) | (idle->sia_policy & 0xF));
+
+	spin_lock_irqsave(&mb2_transfer.auto_pm_lock, flags);
+
+	/*
+	 * The autonomous power management configuration is done through
+	 * fields in mailbox 2, but these fields are only used as shared
+	 * variables - i.e. there is no need to send a message.
+	 */
+	writel(sleep_cfg, (tcdm_base + PRCM_REQ_MB2_AUTO_PM_SLEEP));
+	writel(idle_cfg, (tcdm_base + PRCM_REQ_MB2_AUTO_PM_IDLE));
+
+	mb2_transfer.auto_pm_enabled =
+		((sleep->sva_auto_pm_enable == PRCMU_AUTO_PM_ON) ||
+		 (sleep->sia_auto_pm_enable == PRCMU_AUTO_PM_ON) ||
+		 (idle->sva_auto_pm_enable == PRCMU_AUTO_PM_ON) ||
+		 (idle->sia_auto_pm_enable == PRCMU_AUTO_PM_ON));
+
+	spin_unlock_irqrestore(&mb2_transfer.auto_pm_lock, flags);
+}
+EXPORT_SYMBOL(prcmu_configure_auto_pm);
+
+bool prcmu_is_auto_pm_enabled(void)
+{
+	return mb2_transfer.auto_pm_enabled;
+}
+
+static int request_sysclk(bool enable)
+{
+	int r;
+	unsigned long flags;
+
+	r = 0;
+
+	mutex_lock(&mb3_transfer.sysclk_lock);
+
+	spin_lock_irqsave(&mb3_transfer.lock, flags);
+
+	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(3))
+		cpu_relax();
+
+	writeb((enable ? ON : OFF), (tcdm_base + PRCM_REQ_MB3_SYSCLK_MGT));
+
+	writeb(MB3H_SYSCLK, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB3));
+	writel(MBOX_BIT(3), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+
+	spin_unlock_irqrestore(&mb3_transfer.lock, flags);
+
+	/*
+	 * The firmware only sends an ACK if we want to enable the
+	 * SysClk, and it succeeds.
+	 */
+	if (enable && !wait_for_completion_timeout(&mb3_transfer.sysclk_work,
+			msecs_to_jiffies(20000))) {
+		pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n",
+			__func__);
+		r = -EIO;
+	}
+
+	mutex_unlock(&mb3_transfer.sysclk_lock);
+
+	return r;
+}
+
+static int request_timclk(bool enable)
+{
+	u32 val = (PRCM_TCR_DOZE_MODE | PRCM_TCR_TENSEL_MASK);
+
+	if (!enable)
+		val |= PRCM_TCR_STOP_TIMERS;
+	writel(val, (_PRCMU_BASE + PRCM_TCR));
+
+	return 0;
+}
+
+static int request_reg_clock(u8 clock, bool enable)
+{
+	u32 val;
+	unsigned long flags;
+
+	spin_lock_irqsave(&clk_mgt_lock, flags);
+
+	/* Grab the HW semaphore. */
+	while ((readl(_PRCMU_BASE + PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
+		cpu_relax();
+
+	val = readl(_PRCMU_BASE + clk_mgt[clock].offset);
+	if (enable) {
+		val |= (PRCM_CLK_MGT_CLKEN | clk_mgt[clock].pllsw);
+	} else {
+		clk_mgt[clock].pllsw = (val & PRCM_CLK_MGT_CLKPLLSW_MASK);
+		val &= ~(PRCM_CLK_MGT_CLKEN | PRCM_CLK_MGT_CLKPLLSW_MASK);
+	}
+	writel(val, (_PRCMU_BASE + clk_mgt[clock].offset));
+
+	/* Release the HW semaphore. */
+	writel(0, (_PRCMU_BASE + PRCM_SEM));
+
+	spin_unlock_irqrestore(&clk_mgt_lock, flags);
+
+	return 0;
+}
+
+/**
+ * prcmu_request_clock() - Request for a clock to be enabled or disabled.
+ * @clock:      The clock for which the request is made.
+ * @enable:     Whether the clock should be enabled (true) or disabled (false).
+ *
+ * This function should only be used by the clock implementation.
+ * Do not use it from any other place!
+ */
+int prcmu_request_clock(u8 clock, bool enable)
+{
+	if (clock < PRCMU_NUM_REG_CLOCKS)
+		return request_reg_clock(clock, enable);
+	else if (clock == PRCMU_TIMCLK)
+		return request_timclk(enable);
+	else if (clock == PRCMU_SYSCLK)
+		return request_sysclk(enable);
+	else
+		return -EINVAL;
+}
+
+int prcmu_config_esram0_deep_sleep(u8 state)
+{
+	if ((state > ESRAM0_DEEP_SLEEP_STATE_RET) ||
+	    (state < ESRAM0_DEEP_SLEEP_STATE_OFF))
+		return -EINVAL;
+
+	mutex_lock(&mb4_transfer.lock);
+
+	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
+		cpu_relax();
+
+	writeb(MB4H_MEM_ST, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4));
+	writeb(((DDR_PWR_STATE_OFFHIGHLAT << 4) | DDR_PWR_STATE_ON),
+	       (tcdm_base + PRCM_REQ_MB4_DDR_ST_AP_SLEEP_IDLE));
+	writeb(DDR_PWR_STATE_ON,
+	       (tcdm_base + PRCM_REQ_MB4_DDR_ST_AP_DEEP_IDLE));
+	writeb(state, (tcdm_base + PRCM_REQ_MB4_ESRAM0_ST));
+
+	writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	wait_for_completion(&mb4_transfer.work);
+
+	mutex_unlock(&mb4_transfer.lock);
+
+	return 0;
+}
+
+int prcmu_config_hotdog(u8 threshold)
+{
+	mutex_lock(&mb4_transfer.lock);
+
+	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
+		cpu_relax();
+
+	writeb(threshold, (tcdm_base + PRCM_REQ_MB4_HOTDOG_THRESHOLD));
+	writeb(MB4H_HOTDOG, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4));
+
+	writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	wait_for_completion(&mb4_transfer.work);
+
+	mutex_unlock(&mb4_transfer.lock);
+
+	return 0;
+}
+
+int prcmu_config_hotmon(u8 low, u8 high)
+{
+	mutex_lock(&mb4_transfer.lock);
+
+	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
+		cpu_relax();
+
+	writeb(low, (tcdm_base + PRCM_REQ_MB4_HOTMON_LOW));
+	writeb(high, (tcdm_base + PRCM_REQ_MB4_HOTMON_HIGH));
+	writeb((HOTMON_CONFIG_LOW | HOTMON_CONFIG_HIGH),
+		(tcdm_base + PRCM_REQ_MB4_HOTMON_CONFIG));
+	writeb(MB4H_HOTMON, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4));
+
+	writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	wait_for_completion(&mb4_transfer.work);
+
+	mutex_unlock(&mb4_transfer.lock);
+
+	return 0;
+}
+
+static int config_hot_period(u16 val)
+{
+	mutex_lock(&mb4_transfer.lock);
+
+	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
+		cpu_relax();
+
+	writew(val, (tcdm_base + PRCM_REQ_MB4_HOT_PERIOD));
+	writeb(MB4H_HOT_PERIOD, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4));
+
+	writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	wait_for_completion(&mb4_transfer.work);
+
+	mutex_unlock(&mb4_transfer.lock);
+
+	return 0;
+}
+
+int prcmu_start_temp_sense(u16 cycles32k)
+{
+	if (cycles32k == 0xFFFF)
+		return -EINVAL;
+
+	return config_hot_period(cycles32k);
+}
+
+int prcmu_stop_temp_sense(void)
+{
+	return config_hot_period(0xFFFF);
+}
+
+/**
+ * prcmu_set_clock_divider() - Configure the clock divider.
+ * @clock:	The clock for which the request is made.
+ * @divider:	The clock divider. (< 32)
+ *
+ * This function should only be used by the clock implementation.
+ * Do not use it from any other place!
+ */
+int prcmu_set_clock_divider(u8 clock, u8 divider)
+{
+	u32 val;
+	unsigned long flags;
+
+	if ((clock >= PRCMU_NUM_REG_CLOCKS) || (divider < 1) || (31 < divider))
+		return -EINVAL;
+
+	spin_lock_irqsave(&clk_mgt_lock, flags);
+
+	/* Grab the HW semaphore. */
+	while ((readl(_PRCMU_BASE + PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
+		cpu_relax();
+
+	val = readl(_PRCMU_BASE + clk_mgt[clock].offset);
+	val &= ~(PRCM_CLK_MGT_CLKPLLDIV_MASK);
+	val |= (u32)divider;
+	writel(val, (_PRCMU_BASE + clk_mgt[clock].offset));
+
+	/* Release the HW semaphore. */
+	writel(0, (_PRCMU_BASE + PRCM_SEM));
+
+	spin_unlock_irqrestore(&clk_mgt_lock, flags);
+
+	return 0;
+}
+
+/**
+ * prcmu_abb_read() - Read register value(s) from the ABB.
+ * @slave:	The I2C slave address.
+ * @reg:	The (start) register address.
+ * @value:	The read out value(s).
+ * @size:	The number of registers to read.
+ *
+ * Reads register value(s) from the ABB.
+ * @size has to be 1 for the current firmware version.
+ */
+int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
+{
+	int r;
+
+	if (size != 1)
+		return -EINVAL;
+
+	mutex_lock(&mb5_transfer.lock);
+
+	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
+		cpu_relax();
+
+	writeb(PRCMU_I2C_READ(slave), (tcdm_base + PRCM_REQ_MB5_I2C_SLAVE_OP));
+	writeb(PRCMU_I2C_STOP_EN, (tcdm_base + PRCM_REQ_MB5_I2C_HW_BITS));
+	writeb(reg, (tcdm_base + PRCM_REQ_MB5_I2C_REG));
+	writeb(0, (tcdm_base + PRCM_REQ_MB5_I2C_VAL));
+
+	writel(MBOX_BIT(5), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+
+	if (!wait_for_completion_timeout(&mb5_transfer.work,
+				msecs_to_jiffies(20000))) {
+		pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n",
+			__func__);
+		r = -EIO;
+	} else {
+		r = ((mb5_transfer.ack.status == I2C_RD_OK) ? 0 : -EIO);
+	}
+
+	if (!r)
+		*value = mb5_transfer.ack.value;
+
+	mutex_unlock(&mb5_transfer.lock);
+
+	return r;
+}
+
+/**
+ * prcmu_abb_write() - Write register value(s) to the ABB.
+ * @slave:	The I2C slave address.
+ * @reg:	The (start) register address.
+ * @value:	The value(s) to write.
+ * @size:	The number of registers to write.
+ *
+ * Reads register value(s) from the ABB.
+ * @size has to be 1 for the current firmware version.
+ */
+int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
+{
+	int r;
+
+	if (size != 1)
+		return -EINVAL;
+
+	mutex_lock(&mb5_transfer.lock);
+
+	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
+		cpu_relax();
+
+	writeb(PRCMU_I2C_WRITE(slave), (tcdm_base + PRCM_REQ_MB5_I2C_SLAVE_OP));
+	writeb(PRCMU_I2C_STOP_EN, (tcdm_base + PRCM_REQ_MB5_I2C_HW_BITS));
+	writeb(reg, (tcdm_base + PRCM_REQ_MB5_I2C_REG));
+	writeb(*value, (tcdm_base + PRCM_REQ_MB5_I2C_VAL));
+
+	writel(MBOX_BIT(5), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+
+	if (!wait_for_completion_timeout(&mb5_transfer.work,
+				msecs_to_jiffies(20000))) {
+		pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n",
+			__func__);
+		r = -EIO;
+	} else {
+		r = ((mb5_transfer.ack.status == I2C_WR_OK) ? 0 : -EIO);
+	}
+
+	mutex_unlock(&mb5_transfer.lock);
+
+	return r;
+}
+
+/**
+ * prcmu_ac_wake_req - should be called whenever ARM wants to wakeup Modem
+ */
+void prcmu_ac_wake_req(void)
+{
+	u32 val;
+
+	mutex_lock(&mb0_transfer.ac_wake_lock);
+
+	val = readl(_PRCMU_BASE + PRCM_HOSTACCESS_REQ);
+	if (val & PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ)
+		goto unlock_and_return;
+
+	atomic_set(&ac_wake_req_state, 1);
+
+	writel((val | PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ),
+		(_PRCMU_BASE + PRCM_HOSTACCESS_REQ));
+
+	if (!wait_for_completion_timeout(&mb0_transfer.ac_wake_work,
+			msecs_to_jiffies(20000))) {
+		pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n",
+			__func__);
+	}
+
+unlock_and_return:
+	mutex_unlock(&mb0_transfer.ac_wake_lock);
+}
+
+/**
+ * prcmu_ac_sleep_req - called when ARM no longer needs to talk to modem
+ */
+void prcmu_ac_sleep_req()
+{
+	u32 val;
+
+	mutex_lock(&mb0_transfer.ac_wake_lock);
+
+	val = readl(_PRCMU_BASE + PRCM_HOSTACCESS_REQ);
+	if (!(val & PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ))
+		goto unlock_and_return;
+
+	writel((val & ~PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ),
+		(_PRCMU_BASE + PRCM_HOSTACCESS_REQ));
+
+	if (!wait_for_completion_timeout(&mb0_transfer.ac_wake_work,
+			msecs_to_jiffies(20000))) {
+		pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n",
+			__func__);
+	}
+
+	atomic_set(&ac_wake_req_state, 0);
+
+unlock_and_return:
+	mutex_unlock(&mb0_transfer.ac_wake_lock);
+}
+
+bool prcmu_is_ac_wake_requested(void)
+{
+	return (atomic_read(&ac_wake_req_state) != 0);
+}
+
+/**
+ * prcmu_system_reset - System reset
+ *
+ * Saves the reset reason code and then sets the APE_SOFRST register which
+ * fires interrupt to fw
+ */
+void prcmu_system_reset(u16 reset_code)
+{
+	writew(reset_code, (tcdm_base + PRCM_SW_RST_REASON));
+	writel(1, (_PRCMU_BASE + PRCM_APE_SOFTRST));
+}
+
+/**
+ * prcmu_reset_modem - ask the PRCMU to reset modem
+ */
+void prcmu_modem_reset(void)
+{
+	mutex_lock(&mb1_transfer.lock);
+
+	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
+		cpu_relax();
+
+	writeb(MB1H_RESET_MODEM, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
+	writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	wait_for_completion(&mb1_transfer.work);
+
+	/*
+	 * No need to check return from PRCMU as modem should go in reset state
+	 * This state is already managed by upper layer
+	 */
+
+	mutex_unlock(&mb1_transfer.lock);
+}
+
+static void ack_dbb_wakeup(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&mb0_transfer.lock, flags);
+
+	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
+		cpu_relax();
+
+	writeb(MB0H_READ_WAKEUP_ACK, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB0));
+	writel(MBOX_BIT(0), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+
+	spin_unlock_irqrestore(&mb0_transfer.lock, flags);
+}
+
+static inline void print_unknown_header_warning(u8 n, u8 header)
+{
+	pr_warning("prcmu: Unknown message header (%d) in mailbox %d.\n",
+		header, n);
+}
+
+static bool read_mailbox_0(void)
+{
+	bool r;
+	u32 ev;
+	unsigned int n;
+	u8 header;
+
+	header = readb(tcdm_base + PRCM_MBOX_HEADER_ACK_MB0);
+	switch (header) {
+	case MB0H_WAKEUP_EXE:
+	case MB0H_WAKEUP_SLEEP:
+		if (readb(tcdm_base + PRCM_ACK_MB0_READ_POINTER) & 1)
+			ev = readl(tcdm_base + PRCM_ACK_MB0_WAKEUP_1_8500);
+		else
+			ev = readl(tcdm_base + PRCM_ACK_MB0_WAKEUP_0_8500);
+
+		if (ev & (WAKEUP_BIT_AC_WAKE_ACK | WAKEUP_BIT_AC_SLEEP_ACK))
+			complete(&mb0_transfer.ac_wake_work);
+		if (ev & WAKEUP_BIT_SYSCLK_OK)
+			complete(&mb3_transfer.sysclk_work);
+
+		ev &= mb0_transfer.req.dbb_irqs;
+
+		for (n = 0; n < NUM_PRCMU_WAKEUPS; n++) {
+			if (ev & prcmu_irq_bit[n])
+				generic_handle_irq(IRQ_PRCMU_BASE + n);
+		}
+		r = true;
+		break;
+	default:
+		print_unknown_header_warning(0, header);
+		r = false;
+		break;
+	}
+	writel(MBOX_BIT(0), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+	return r;
+}
+
+static bool read_mailbox_1(void)
+{
+	mb1_transfer.ack.header = readb(tcdm_base + PRCM_MBOX_HEADER_REQ_MB1);
+	mb1_transfer.ack.arm_opp = readb(tcdm_base +
+		PRCM_ACK_MB1_CURRENT_ARM_OPP);
+	mb1_transfer.ack.ape_opp = readb(tcdm_base +
+		PRCM_ACK_MB1_CURRENT_APE_OPP);
+	mb1_transfer.ack.ape_voltage_status = readb(tcdm_base +
+		PRCM_ACK_MB1_APE_VOLTAGE_STATUS);
+	writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+	complete(&mb1_transfer.work);
+	return false;
+}
+
+static bool read_mailbox_2(void)
+{
+	mb2_transfer.ack.status = readb(tcdm_base + PRCM_ACK_MB2_DPS_STATUS);
+	writel(MBOX_BIT(2), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+	complete(&mb2_transfer.work);
+	return false;
+}
+
+static bool read_mailbox_3(void)
+{
+	writel(MBOX_BIT(3), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+	return false;
+}
+
+static bool read_mailbox_4(void)
+{
+	u8 header;
+	bool do_complete = true;
+
+	header = readb(tcdm_base + PRCM_MBOX_HEADER_REQ_MB4);
+	switch (header) {
+	case MB4H_MEM_ST:
+	case MB4H_HOTDOG:
+	case MB4H_HOTMON:
+	case MB4H_HOT_PERIOD:
+		break;
+	default:
+		print_unknown_header_warning(4, header);
+		do_complete = false;
+		break;
+	}
+
+	writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+
+	if (do_complete)
+		complete(&mb4_transfer.work);
+
+	return false;
+}
+
+static bool read_mailbox_5(void)
+{
+	mb5_transfer.ack.status = readb(tcdm_base + PRCM_ACK_MB5_I2C_STATUS);
+	mb5_transfer.ack.value = readb(tcdm_base + PRCM_ACK_MB5_I2C_VAL);
+	writel(MBOX_BIT(5), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+	complete(&mb5_transfer.work);
+	return false;
+}
+
+static bool read_mailbox_6(void)
+{
+	writel(MBOX_BIT(6), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+	return false;
+}
+
+static bool read_mailbox_7(void)
+{
+	writel(MBOX_BIT(7), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+	return false;
+}
+
+static bool (* const read_mailbox[NUM_MB])(void) = {
+	read_mailbox_0,
+	read_mailbox_1,
+	read_mailbox_2,
+	read_mailbox_3,
+	read_mailbox_4,
+	read_mailbox_5,
+	read_mailbox_6,
+	read_mailbox_7
+};
+
+static irqreturn_t prcmu_irq_handler(int irq, void *data)
+{
+	u32 bits;
+	u8 n;
+	irqreturn_t r;
+
+	bits = (readl(_PRCMU_BASE + PRCM_ARM_IT1_VAL) & ALL_MBOX_BITS);
+	if (unlikely(!bits))
+		return IRQ_NONE;
+
+	r = IRQ_HANDLED;
+	for (n = 0; bits; n++) {
+		if (bits & MBOX_BIT(n)) {
+			bits -= MBOX_BIT(n);
+			if (read_mailbox[n]())
+				r = IRQ_WAKE_THREAD;
+		}
+	}
+	return r;
+}
+
+static irqreturn_t prcmu_irq_thread_fn(int irq, void *data)
+{
+	ack_dbb_wakeup();
+	return IRQ_HANDLED;
+}
+
+static void prcmu_mask_work(struct work_struct *work)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&mb0_transfer.lock, flags);
+
+	config_wakeups();
+
+	spin_unlock_irqrestore(&mb0_transfer.lock, flags);
+}
+
+static void prcmu_irq_mask(struct irq_data *d)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&mb0_transfer.dbb_irqs_lock, flags);
+
+	mb0_transfer.req.dbb_irqs &= ~prcmu_irq_bit[d->irq - IRQ_PRCMU_BASE];
+
+	spin_unlock_irqrestore(&mb0_transfer.dbb_irqs_lock, flags);
+
+	if (d->irq != IRQ_PRCMU_CA_SLEEP)
+		schedule_work(&mb0_transfer.mask_work);
+}
+
+static void prcmu_irq_unmask(struct irq_data *d)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&mb0_transfer.dbb_irqs_lock, flags);
+
+	mb0_transfer.req.dbb_irqs |= prcmu_irq_bit[d->irq - IRQ_PRCMU_BASE];
+
+	spin_unlock_irqrestore(&mb0_transfer.dbb_irqs_lock, flags);
+
+	if (d->irq != IRQ_PRCMU_CA_SLEEP)
+		schedule_work(&mb0_transfer.mask_work);
+}
+
+static void noop(struct irq_data *d)
+{
+}
+
+static struct irq_chip prcmu_irq_chip = {
+	.name		= "prcmu",
+	.irq_disable	= prcmu_irq_mask,
+	.irq_ack	= noop,
+	.irq_mask	= prcmu_irq_mask,
+	.irq_unmask	= prcmu_irq_unmask,
+};
+
+void __init prcmu_early_init(void)
+{
+	unsigned int i;
+
+	if (cpu_is_u8500v1()) {
+		tcdm_base = __io_address(U8500_PRCMU_TCDM_BASE_V1);
+	} else if (cpu_is_u8500v2()) {
+		void *tcpm_base = ioremap_nocache(U8500_PRCMU_TCPM_BASE, SZ_4K);
+
+		if (tcpm_base != NULL) {
+			int version;
+			version = readl(tcpm_base + PRCMU_FW_VERSION_OFFSET);
+			prcmu_version.project_number = version & 0xFF;
+			prcmu_version.api_version = (version >> 8) & 0xFF;
+			prcmu_version.func_version = (version >> 16) & 0xFF;
+			prcmu_version.errata = (version >> 24) & 0xFF;
+			pr_info("PRCMU firmware version %d.%d.%d\n",
+				(version >> 8) & 0xFF, (version >> 16) & 0xFF,
+				(version >> 24) & 0xFF);
+			iounmap(tcpm_base);
+		}
+
+		tcdm_base = __io_address(U8500_PRCMU_TCDM_BASE);
+	} else {
+		pr_err("prcmu: Unsupported chip version\n");
+		BUG();
+	}
+
+	spin_lock_init(&mb0_transfer.lock);
+	spin_lock_init(&mb0_transfer.dbb_irqs_lock);
+	mutex_init(&mb0_transfer.ac_wake_lock);
+	init_completion(&mb0_transfer.ac_wake_work);
+	mutex_init(&mb1_transfer.lock);
+	init_completion(&mb1_transfer.work);
+	mutex_init(&mb2_transfer.lock);
+	init_completion(&mb2_transfer.work);
+	spin_lock_init(&mb2_transfer.auto_pm_lock);
+	spin_lock_init(&mb3_transfer.lock);
+	mutex_init(&mb3_transfer.sysclk_lock);
+	init_completion(&mb3_transfer.sysclk_work);
+	mutex_init(&mb4_transfer.lock);
+	init_completion(&mb4_transfer.work);
+	mutex_init(&mb5_transfer.lock);
+	init_completion(&mb5_transfer.work);
+
+	INIT_WORK(&mb0_transfer.mask_work, prcmu_mask_work);
+
+	/* Initalize irqs. */
+	for (i = 0; i < NUM_PRCMU_WAKEUPS; i++) {
+		unsigned int irq;
+
+		irq = IRQ_PRCMU_BASE + i;
+		irq_set_chip_and_handler(irq, &prcmu_irq_chip,
+					 handle_simple_irq);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+}
+
+/*
+ * Power domain switches (ePODs) modeled as regulators for the DB8500 SoC
+ */
+static struct regulator_consumer_supply db8500_vape_consumers[] = {
+	REGULATOR_SUPPLY("v-ape", NULL),
+	REGULATOR_SUPPLY("v-i2c", "nmk-i2c.0"),
+	REGULATOR_SUPPLY("v-i2c", "nmk-i2c.1"),
+	REGULATOR_SUPPLY("v-i2c", "nmk-i2c.2"),
+	REGULATOR_SUPPLY("v-i2c", "nmk-i2c.3"),
+	/* "v-mmc" changed to "vcore" in the mainline kernel */
+	REGULATOR_SUPPLY("vcore", "sdi0"),
+	REGULATOR_SUPPLY("vcore", "sdi1"),
+	REGULATOR_SUPPLY("vcore", "sdi2"),
+	REGULATOR_SUPPLY("vcore", "sdi3"),
+	REGULATOR_SUPPLY("vcore", "sdi4"),
+	REGULATOR_SUPPLY("v-dma", "dma40.0"),
+	REGULATOR_SUPPLY("v-ape", "ab8500-usb.0"),
+	/* "v-uart" changed to "vcore" in the mainline kernel */
+	REGULATOR_SUPPLY("vcore", "uart0"),
+	REGULATOR_SUPPLY("vcore", "uart1"),
+	REGULATOR_SUPPLY("vcore", "uart2"),
+	REGULATOR_SUPPLY("v-ape", "nmk-ske-keypad.0"),
+};
+
+static struct regulator_consumer_supply db8500_vsmps2_consumers[] = {
+	/* CG2900 and CW1200 power to off-chip peripherals */
+	REGULATOR_SUPPLY("gbf_1v8", "cg2900-uart.0"),
+	REGULATOR_SUPPLY("wlan_1v8", "cw1200.0"),
+	REGULATOR_SUPPLY("musb_1v8", "ab8500-usb.0"),
+	/* AV8100 regulator */
+	REGULATOR_SUPPLY("hdmi_1v8", "0-0070"),
+};
+
+static struct regulator_consumer_supply db8500_b2r2_mcde_consumers[] = {
+	REGULATOR_SUPPLY("vsupply", "b2r2.0"),
+	REGULATOR_SUPPLY("vsupply", "mcde.0"),
+};
+
+static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = {
+	[DB8500_REGULATOR_VAPE] = {
+		.constraints = {
+			.name = "db8500-vape",
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+		},
+		.consumer_supplies = db8500_vape_consumers,
+		.num_consumer_supplies = ARRAY_SIZE(db8500_vape_consumers),
+	},
+	[DB8500_REGULATOR_VARM] = {
+		.constraints = {
+			.name = "db8500-varm",
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+		},
+	},
+	[DB8500_REGULATOR_VMODEM] = {
+		.constraints = {
+			.name = "db8500-vmodem",
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+		},
+	},
+	[DB8500_REGULATOR_VPLL] = {
+		.constraints = {
+			.name = "db8500-vpll",
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+		},
+	},
+	[DB8500_REGULATOR_VSMPS1] = {
+		.constraints = {
+			.name = "db8500-vsmps1",
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+		},
+	},
+	[DB8500_REGULATOR_VSMPS2] = {
+		.constraints = {
+			.name = "db8500-vsmps2",
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+		},
+		.consumer_supplies = db8500_vsmps2_consumers,
+		.num_consumer_supplies = ARRAY_SIZE(db8500_vsmps2_consumers),
+	},
+	[DB8500_REGULATOR_VSMPS3] = {
+		.constraints = {
+			.name = "db8500-vsmps3",
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+		},
+	},
+	[DB8500_REGULATOR_VRF1] = {
+		.constraints = {
+			.name = "db8500-vrf1",
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+		},
+	},
+	[DB8500_REGULATOR_SWITCH_SVAMMDSP] = {
+		.supply_regulator = "db8500-vape",
+		.constraints = {
+			.name = "db8500-sva-mmdsp",
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+		},
+	},
+	[DB8500_REGULATOR_SWITCH_SVAMMDSPRET] = {
+		.constraints = {
+			/* "ret" means "retention" */
+			.name = "db8500-sva-mmdsp-ret",
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+		},
+	},
+	[DB8500_REGULATOR_SWITCH_SVAPIPE] = {
+		.supply_regulator = "db8500-vape",
+		.constraints = {
+			.name = "db8500-sva-pipe",
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+		},
+	},
+	[DB8500_REGULATOR_SWITCH_SIAMMDSP] = {
+		.supply_regulator = "db8500-vape",
+		.constraints = {
+			.name = "db8500-sia-mmdsp",
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+		},
+	},
+	[DB8500_REGULATOR_SWITCH_SIAMMDSPRET] = {
+		.constraints = {
+			.name = "db8500-sia-mmdsp-ret",
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+		},
+	},
+	[DB8500_REGULATOR_SWITCH_SIAPIPE] = {
+		.supply_regulator = "db8500-vape",
+		.constraints = {
+			.name = "db8500-sia-pipe",
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+		},
+	},
+	[DB8500_REGULATOR_SWITCH_SGA] = {
+		.supply_regulator = "db8500-vape",
+		.constraints = {
+			.name = "db8500-sga",
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+		},
+	},
+	[DB8500_REGULATOR_SWITCH_B2R2_MCDE] = {
+		.supply_regulator = "db8500-vape",
+		.constraints = {
+			.name = "db8500-b2r2-mcde",
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+		},
+		.consumer_supplies = db8500_b2r2_mcde_consumers,
+		.num_consumer_supplies = ARRAY_SIZE(db8500_b2r2_mcde_consumers),
+	},
+	[DB8500_REGULATOR_SWITCH_ESRAM12] = {
+		.supply_regulator = "db8500-vape",
+		.constraints = {
+			.name = "db8500-esram12",
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+		},
+	},
+	[DB8500_REGULATOR_SWITCH_ESRAM12RET] = {
+		.constraints = {
+			.name = "db8500-esram12-ret",
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+		},
+	},
+	[DB8500_REGULATOR_SWITCH_ESRAM34] = {
+		.supply_regulator = "db8500-vape",
+		.constraints = {
+			.name = "db8500-esram34",
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+		},
+	},
+	[DB8500_REGULATOR_SWITCH_ESRAM34RET] = {
+		.constraints = {
+			.name = "db8500-esram34-ret",
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+		},
+	},
+};
+
+static struct mfd_cell db8500_prcmu_devs[] = {
+	{
+		.name = "db8500-prcmu-regulators",
+		.mfd_data = &db8500_regulators,
+	},
+	{
+		.name = "cpufreq-u8500",
+	},
+};
+
+/**
+ * prcmu_fw_init - arch init call for the Linux PRCMU fw init logic
+ *
+ */
+static int __init db8500_prcmu_probe(struct platform_device *pdev)
+{
+	int err = 0;
+
+	if (ux500_is_svp())
+		return -ENODEV;
+
+	/* Clean up the mailbox interrupts after pre-kernel code. */
+	writel(ALL_MBOX_BITS, (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+
+	err = request_threaded_irq(IRQ_DB8500_PRCMU1, prcmu_irq_handler,
+		prcmu_irq_thread_fn, IRQF_NO_SUSPEND, "prcmu", NULL);
+	if (err < 0) {
+		pr_err("prcmu: Failed to allocate IRQ_DB8500_PRCMU1.\n");
+		err = -EBUSY;
+		goto no_irq_return;
+	}
+
+	if (cpu_is_u8500v20_or_later())
+		prcmu_config_esram0_deep_sleep(ESRAM0_DEEP_SLEEP_STATE_RET);
+
+	err = mfd_add_devices(&pdev->dev, 0, db8500_prcmu_devs,
+			      ARRAY_SIZE(db8500_prcmu_devs), NULL,
+			      0);
+
+	if (err)
+		pr_err("prcmu: Failed to add subdevices\n");
+	else
+		pr_info("DB8500 PRCMU initialized\n");
+
+no_irq_return:
+	return err;
+}
+
+static struct platform_driver db8500_prcmu_driver = {
+	.driver = {
+		.name = "db8500-prcmu",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init db8500_prcmu_init(void)
+{
+	return platform_driver_probe(&db8500_prcmu_driver, db8500_prcmu_probe);
+}
+
+arch_initcall(db8500_prcmu_init);
+
+MODULE_AUTHOR("Mattias Nilsson <mattias.i.nilsson@stericsson.com>");
+MODULE_DESCRIPTION("DB8500 PRCM Unit driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index b9f29e0d429..f0b13a0d185 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -274,6 +274,13 @@ config REGULATOR_AB8500
 	  This driver supports the regulators found on the ST-Ericsson mixed
 	  signal AB8500 PMIC
 
+config REGULATOR_DB8500_PRCMU
+	bool "ST-Ericsson DB8500 Voltage Domain Regulators"
+	depends on MFD_DB8500_PRCMU
+	help
+	  This driver supports the voltage domain regulators controlled by the
+	  DB8500 PRCMU
+
 config REGULATOR_TPS6586X
 	tristate "TI TPS6586X Power regulators"
 	depends on MFD_TPS6586X
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index d72a4275677..165ff5371e9 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -41,5 +41,6 @@ obj-$(CONFIG_REGULATOR_TPS6524X) += tps6524x-regulator.o
 obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o
 obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o
 obj-$(CONFIG_REGULATOR_AB8500)	+= ab8500.o
+obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o
 
 ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG
diff --git a/drivers/regulator/db8500-prcmu.c b/drivers/regulator/db8500-prcmu.c
new file mode 100644
index 00000000000..1089a961616
--- /dev/null
+++ b/drivers/regulator/db8500-prcmu.c
@@ -0,0 +1,558 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ * Authors: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson
+ *          Bengt Jonsson <bengt.g.jonsson@stericsson.com> for ST-Ericsson
+ *
+ * Power domain regulators on DB8500
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/db8500-prcmu.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/db8500-prcmu.h>
+
+/*
+ * power state reference count
+ */
+static int power_state_active_cnt; /* will initialize to zero */
+static DEFINE_SPINLOCK(power_state_active_lock);
+
+static void power_state_active_enable(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&power_state_active_lock, flags);
+	power_state_active_cnt++;
+	spin_unlock_irqrestore(&power_state_active_lock, flags);
+}
+
+static int power_state_active_disable(void)
+{
+	int ret = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&power_state_active_lock, flags);
+	if (power_state_active_cnt <= 0) {
+		pr_err("power state: unbalanced enable/disable calls\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	power_state_active_cnt--;
+out:
+	spin_unlock_irqrestore(&power_state_active_lock, flags);
+	return ret;
+}
+
+/*
+ * Exported interface for CPUIdle only. This function is called when interrupts
+ * are turned off. Hence, no locking.
+ */
+int power_state_active_is_enabled(void)
+{
+	return (power_state_active_cnt > 0);
+}
+
+/**
+ * struct db8500_regulator_info - db8500 regulator information
+ * @dev: device pointer
+ * @desc: regulator description
+ * @rdev: regulator device pointer
+ * @is_enabled: status of the regulator
+ * @epod_id: id for EPOD (power domain)
+ * @is_ramret: RAM retention switch for EPOD (power domain)
+ * @operating_point: operating point (only for vape, to be removed)
+ *
+ */
+struct db8500_regulator_info {
+	struct device *dev;
+	struct regulator_desc desc;
+	struct regulator_dev *rdev;
+	bool is_enabled;
+	u16 epod_id;
+	bool is_ramret;
+	bool exclude_from_power_state;
+	unsigned int operating_point;
+};
+
+static int db8500_regulator_enable(struct regulator_dev *rdev)
+{
+	struct db8500_regulator_info *info = rdev_get_drvdata(rdev);
+
+	if (info == NULL)
+		return -EINVAL;
+
+	dev_vdbg(rdev_get_dev(rdev), "regulator-%s-enable\n",
+		info->desc.name);
+
+	info->is_enabled = true;
+	if (!info->exclude_from_power_state)
+		power_state_active_enable();
+
+	return 0;
+}
+
+static int db8500_regulator_disable(struct regulator_dev *rdev)
+{
+	struct db8500_regulator_info *info = rdev_get_drvdata(rdev);
+	int ret = 0;
+
+	if (info == NULL)
+		return -EINVAL;
+
+	dev_vdbg(rdev_get_dev(rdev), "regulator-%s-disable\n",
+		info->desc.name);
+
+	info->is_enabled = false;
+	if (!info->exclude_from_power_state)
+		ret = power_state_active_disable();
+
+	return ret;
+}
+
+static int db8500_regulator_is_enabled(struct regulator_dev *rdev)
+{
+	struct db8500_regulator_info *info = rdev_get_drvdata(rdev);
+
+	if (info == NULL)
+		return -EINVAL;
+
+	dev_vdbg(rdev_get_dev(rdev), "regulator-%s-is_enabled (is_enabled):"
+		" %i\n", info->desc.name, info->is_enabled);
+
+	return info->is_enabled;
+}
+
+/* db8500 regulator operations */
+static struct regulator_ops db8500_regulator_ops = {
+	.enable			= db8500_regulator_enable,
+	.disable		= db8500_regulator_disable,
+	.is_enabled		= db8500_regulator_is_enabled,
+};
+
+/*
+ * EPOD control
+ */
+static bool epod_on[NUM_EPOD_ID];
+static bool epod_ramret[NUM_EPOD_ID];
+
+static int enable_epod(u16 epod_id, bool ramret)
+{
+	int ret;
+
+	if (ramret) {
+		if (!epod_on[epod_id]) {
+			ret = prcmu_set_epod(epod_id, EPOD_STATE_RAMRET);
+			if (ret < 0)
+				return ret;
+		}
+		epod_ramret[epod_id] = true;
+	} else {
+		ret = prcmu_set_epod(epod_id, EPOD_STATE_ON);
+		if (ret < 0)
+			return ret;
+		epod_on[epod_id] = true;
+	}
+
+	return 0;
+}
+
+static int disable_epod(u16 epod_id, bool ramret)
+{
+	int ret;
+
+	if (ramret) {
+		if (!epod_on[epod_id]) {
+			ret = prcmu_set_epod(epod_id, EPOD_STATE_OFF);
+			if (ret < 0)
+				return ret;
+		}
+		epod_ramret[epod_id] = false;
+	} else {
+		if (epod_ramret[epod_id]) {
+			ret = prcmu_set_epod(epod_id, EPOD_STATE_RAMRET);
+			if (ret < 0)
+				return ret;
+		} else {
+			ret = prcmu_set_epod(epod_id, EPOD_STATE_OFF);
+			if (ret < 0)
+				return ret;
+		}
+		epod_on[epod_id] = false;
+	}
+
+	return 0;
+}
+
+/*
+ * Regulator switch
+ */
+static int db8500_regulator_switch_enable(struct regulator_dev *rdev)
+{
+	struct db8500_regulator_info *info = rdev_get_drvdata(rdev);
+	int ret;
+
+	if (info == NULL)
+		return -EINVAL;
+
+	dev_vdbg(rdev_get_dev(rdev), "regulator-switch-%s-enable\n",
+		info->desc.name);
+
+	ret = enable_epod(info->epod_id, info->is_ramret);
+	if (ret < 0) {
+		dev_err(rdev_get_dev(rdev),
+			"regulator-switch-%s-enable: prcmu call failed\n",
+			info->desc.name);
+		goto out;
+	}
+
+	info->is_enabled = true;
+out:
+	return ret;
+}
+
+static int db8500_regulator_switch_disable(struct regulator_dev *rdev)
+{
+	struct db8500_regulator_info *info = rdev_get_drvdata(rdev);
+	int ret;
+
+	if (info == NULL)
+		return -EINVAL;
+
+	dev_vdbg(rdev_get_dev(rdev), "regulator-switch-%s-disable\n",
+		info->desc.name);
+
+	ret = disable_epod(info->epod_id, info->is_ramret);
+	if (ret < 0) {
+		dev_err(rdev_get_dev(rdev),
+			"regulator_switch-%s-disable: prcmu call failed\n",
+			info->desc.name);
+		goto out;
+	}
+
+	info->is_enabled = 0;
+out:
+	return ret;
+}
+
+static int db8500_regulator_switch_is_enabled(struct regulator_dev *rdev)
+{
+	struct db8500_regulator_info *info = rdev_get_drvdata(rdev);
+
+	if (info == NULL)
+		return -EINVAL;
+
+	dev_vdbg(rdev_get_dev(rdev),
+		"regulator-switch-%s-is_enabled (is_enabled): %i\n",
+		info->desc.name, info->is_enabled);
+
+	return info->is_enabled;
+}
+
+static struct regulator_ops db8500_regulator_switch_ops = {
+	.enable			= db8500_regulator_switch_enable,
+	.disable		= db8500_regulator_switch_disable,
+	.is_enabled		= db8500_regulator_switch_is_enabled,
+};
+
+/*
+ * Regulator information
+ */
+static struct db8500_regulator_info
+		db8500_regulator_info[DB8500_NUM_REGULATORS] = {
+	[DB8500_REGULATOR_VAPE] = {
+		.desc = {
+			.name	= "db8500-vape",
+			.id	= DB8500_REGULATOR_VAPE,
+			.ops	= &db8500_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.owner	= THIS_MODULE,
+		},
+	},
+	[DB8500_REGULATOR_VARM] = {
+		.desc = {
+			.name	= "db8500-varm",
+			.id	= DB8500_REGULATOR_VARM,
+			.ops	= &db8500_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.owner	= THIS_MODULE,
+		},
+	},
+	[DB8500_REGULATOR_VMODEM] = {
+		.desc = {
+			.name	= "db8500-vmodem",
+			.id	= DB8500_REGULATOR_VMODEM,
+			.ops	= &db8500_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.owner	= THIS_MODULE,
+		},
+	},
+	[DB8500_REGULATOR_VPLL] = {
+		.desc = {
+			.name	= "db8500-vpll",
+			.id	= DB8500_REGULATOR_VPLL,
+			.ops	= &db8500_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.owner	= THIS_MODULE,
+		},
+	},
+	[DB8500_REGULATOR_VSMPS1] = {
+		.desc = {
+			.name	= "db8500-vsmps1",
+			.id	= DB8500_REGULATOR_VSMPS1,
+			.ops	= &db8500_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.owner	= THIS_MODULE,
+		},
+	},
+	[DB8500_REGULATOR_VSMPS2] = {
+		.desc = {
+			.name	= "db8500-vsmps2",
+			.id	= DB8500_REGULATOR_VSMPS2,
+			.ops	= &db8500_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.owner	= THIS_MODULE,
+		},
+		.exclude_from_power_state = true,
+	},
+	[DB8500_REGULATOR_VSMPS3] = {
+		.desc = {
+			.name	= "db8500-vsmps3",
+			.id	= DB8500_REGULATOR_VSMPS3,
+			.ops	= &db8500_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.owner	= THIS_MODULE,
+		},
+	},
+	[DB8500_REGULATOR_VRF1] = {
+		.desc = {
+			.name	= "db8500-vrf1",
+			.id	= DB8500_REGULATOR_VRF1,
+			.ops	= &db8500_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.owner	= THIS_MODULE,
+		},
+	},
+	[DB8500_REGULATOR_SWITCH_SVAMMDSP] = {
+		.desc = {
+			.name	= "db8500-sva-mmdsp",
+			.id	= DB8500_REGULATOR_SWITCH_SVAMMDSP,
+			.ops	= &db8500_regulator_switch_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.owner	= THIS_MODULE,
+		},
+		.epod_id = EPOD_ID_SVAMMDSP,
+	},
+	[DB8500_REGULATOR_SWITCH_SVAMMDSPRET] = {
+		.desc = {
+			.name	= "db8500-sva-mmdsp-ret",
+			.id	= DB8500_REGULATOR_SWITCH_SVAMMDSPRET,
+			.ops	= &db8500_regulator_switch_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.owner	= THIS_MODULE,
+		},
+		.epod_id = EPOD_ID_SVAMMDSP,
+		.is_ramret = true,
+	},
+	[DB8500_REGULATOR_SWITCH_SVAPIPE] = {
+		.desc = {
+			.name	= "db8500-sva-pipe",
+			.id	= DB8500_REGULATOR_SWITCH_SVAPIPE,
+			.ops	= &db8500_regulator_switch_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.owner	= THIS_MODULE,
+		},
+		.epod_id = EPOD_ID_SVAPIPE,
+	},
+	[DB8500_REGULATOR_SWITCH_SIAMMDSP] = {
+		.desc = {
+			.name	= "db8500-sia-mmdsp",
+			.id	= DB8500_REGULATOR_SWITCH_SIAMMDSP,
+			.ops	= &db8500_regulator_switch_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.owner	= THIS_MODULE,
+		},
+		.epod_id = EPOD_ID_SIAMMDSP,
+	},
+	[DB8500_REGULATOR_SWITCH_SIAMMDSPRET] = {
+		.desc = {
+			.name	= "db8500-sia-mmdsp-ret",
+			.id	= DB8500_REGULATOR_SWITCH_SIAMMDSPRET,
+			.ops	= &db8500_regulator_switch_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.owner	= THIS_MODULE,
+		},
+		.epod_id = EPOD_ID_SIAMMDSP,
+		.is_ramret = true,
+	},
+	[DB8500_REGULATOR_SWITCH_SIAPIPE] = {
+		.desc = {
+			.name	= "db8500-sia-pipe",
+			.id	= DB8500_REGULATOR_SWITCH_SIAPIPE,
+			.ops	= &db8500_regulator_switch_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.owner	= THIS_MODULE,
+		},
+		.epod_id = EPOD_ID_SIAPIPE,
+	},
+	[DB8500_REGULATOR_SWITCH_SGA] = {
+		.desc = {
+			.name	= "db8500-sga",
+			.id	= DB8500_REGULATOR_SWITCH_SGA,
+			.ops	= &db8500_regulator_switch_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.owner	= THIS_MODULE,
+		},
+		.epod_id = EPOD_ID_SGA,
+	},
+	[DB8500_REGULATOR_SWITCH_B2R2_MCDE] = {
+		.desc = {
+			.name	= "db8500-b2r2-mcde",
+			.id	= DB8500_REGULATOR_SWITCH_B2R2_MCDE,
+			.ops	= &db8500_regulator_switch_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.owner	= THIS_MODULE,
+		},
+		.epod_id = EPOD_ID_B2R2_MCDE,
+	},
+	[DB8500_REGULATOR_SWITCH_ESRAM12] = {
+		.desc = {
+			.name	= "db8500-esram12",
+			.id	= DB8500_REGULATOR_SWITCH_ESRAM12,
+			.ops	= &db8500_regulator_switch_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.owner	= THIS_MODULE,
+		},
+		.epod_id	= EPOD_ID_ESRAM12,
+		.is_enabled	= true,
+	},
+	[DB8500_REGULATOR_SWITCH_ESRAM12RET] = {
+		.desc = {
+			.name	= "db8500-esram12-ret",
+			.id	= DB8500_REGULATOR_SWITCH_ESRAM12RET,
+			.ops	= &db8500_regulator_switch_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.owner	= THIS_MODULE,
+		},
+		.epod_id = EPOD_ID_ESRAM12,
+		.is_ramret = true,
+	},
+	[DB8500_REGULATOR_SWITCH_ESRAM34] = {
+		.desc = {
+			.name	= "db8500-esram34",
+			.id	= DB8500_REGULATOR_SWITCH_ESRAM34,
+			.ops	= &db8500_regulator_switch_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.owner	= THIS_MODULE,
+		},
+		.epod_id	= EPOD_ID_ESRAM34,
+		.is_enabled	= true,
+	},
+	[DB8500_REGULATOR_SWITCH_ESRAM34RET] = {
+		.desc = {
+			.name	= "db8500-esram34-ret",
+			.id	= DB8500_REGULATOR_SWITCH_ESRAM34RET,
+			.ops	= &db8500_regulator_switch_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.owner	= THIS_MODULE,
+		},
+		.epod_id = EPOD_ID_ESRAM34,
+		.is_ramret = true,
+	},
+};
+
+static int __devinit db8500_regulator_probe(struct platform_device *pdev)
+{
+	struct regulator_init_data *db8500_init_data = mfd_get_data(pdev);
+	int i, err;
+
+	/* register all regulators */
+	for (i = 0; i < ARRAY_SIZE(db8500_regulator_info); i++) {
+		struct db8500_regulator_info *info;
+		struct regulator_init_data *init_data = &db8500_init_data[i];
+
+		/* assign per-regulator data */
+		info = &db8500_regulator_info[i];
+		info->dev = &pdev->dev;
+
+		/* register with the regulator framework */
+		info->rdev = regulator_register(&info->desc, &pdev->dev,
+				init_data, info);
+		if (IS_ERR(info->rdev)) {
+			err = PTR_ERR(info->rdev);
+			dev_err(&pdev->dev, "failed to register %s: err %i\n",
+				info->desc.name, err);
+
+			/* if failing, unregister all earlier regulators */
+			i--;
+			while (i >= 0) {
+				info = &db8500_regulator_info[i];
+				regulator_unregister(info->rdev);
+				i--;
+			}
+			return err;
+		}
+
+		dev_dbg(rdev_get_dev(info->rdev),
+			"regulator-%s-probed\n", info->desc.name);
+	}
+
+	return 0;
+}
+
+static int __exit db8500_regulator_remove(struct platform_device *pdev)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(db8500_regulator_info); i++) {
+		struct db8500_regulator_info *info;
+		info = &db8500_regulator_info[i];
+
+		dev_vdbg(rdev_get_dev(info->rdev),
+			"regulator-%s-remove\n", info->desc.name);
+
+		regulator_unregister(info->rdev);
+	}
+
+	return 0;
+}
+
+static struct platform_driver db8500_regulator_driver = {
+	.driver = {
+		.name = "db8500-prcmu-regulators",
+		.owner = THIS_MODULE,
+	},
+	.probe = db8500_regulator_probe,
+	.remove = __exit_p(db8500_regulator_remove),
+};
+
+static int __init db8500_regulator_init(void)
+{
+	int ret;
+
+	ret = platform_driver_register(&db8500_regulator_driver);
+	if (ret < 0)
+		return -ENODEV;
+
+	return 0;
+}
+
+static void __exit db8500_regulator_exit(void)
+{
+	platform_driver_unregister(&db8500_regulator_driver);
+}
+
+arch_initcall(db8500_regulator_init);
+module_exit(db8500_regulator_exit);
+
+MODULE_AUTHOR("STMicroelectronics/ST-Ericsson");
+MODULE_DESCRIPTION("DB8500 regulator driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/mfd/db5500-prcmu.h b/include/linux/mfd/db5500-prcmu.h
new file mode 100644
index 00000000000..f0977986402
--- /dev/null
+++ b/include/linux/mfd/db5500-prcmu.h
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * U5500 PRCMU API.
+ */
+#ifndef __MACH_PRCMU_U5500_H
+#define __MACH_PRCMU_U5500_H
+
+#ifdef CONFIG_UX500_SOC_DB5500
+
+void db5500_prcmu_early_init(void);
+
+int db5500_prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);
+int db5500_prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size);
+
+#else /* !CONFIG_UX500_SOC_DB5500 */
+
+static inline void db5500_prcmu_early_init(void)
+{
+}
+
+static inline int db5500_prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
+{
+	return -ENOSYS;
+}
+
+static inline int db5500_prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
+{
+	return -ENOSYS;
+}
+
+#endif /* CONFIG_UX500_SOC_DB5500 */
+
+static inline int db5500_prcmu_config_abb_event_readout(u32 abb_events)
+{
+#ifdef CONFIG_MACH_U5500_SIMULATOR
+	return 0;
+#else
+	return -1;
+#endif
+}
+
+#endif /* __MACH_PRCMU_U5500_H */
diff --git a/include/linux/mfd/db8500-prcmu.h b/include/linux/mfd/db8500-prcmu.h
new file mode 100644
index 00000000000..917dbcab701
--- /dev/null
+++ b/include/linux/mfd/db8500-prcmu.h
@@ -0,0 +1,978 @@
+/*
+ * Copyright (C) STMicroelectronics 2009
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
+ *
+ * PRCMU f/w APIs
+ */
+#ifndef __MFD_DB8500_PRCMU_H
+#define __MFD_DB8500_PRCMU_H
+
+#include <linux/interrupt.h>
+#include <linux/notifier.h>
+
+/* This portion previously known as <mach/prcmu-fw-defs_v1.h> */
+
+/**
+ * enum state - ON/OFF state definition
+ * @OFF: State is ON
+ * @ON: State is OFF
+ *
+ */
+enum state {
+	OFF = 0x0,
+	ON  = 0x1,
+};
+
+/**
+ * enum ret_state - general purpose On/Off/Retention states
+ *
+ */
+enum ret_state {
+	OFFST = 0,
+	ONST  = 1,
+	RETST = 2
+};
+
+/**
+ * enum clk_arm - ARM Cortex A9 clock schemes
+ * @A9_OFF:
+ * @A9_BOOT:
+ * @A9_OPPT1:
+ * @A9_OPPT2:
+ * @A9_EXTCLK:
+ */
+enum clk_arm {
+	A9_OFF,
+	A9_BOOT,
+	A9_OPPT1,
+	A9_OPPT2,
+	A9_EXTCLK
+};
+
+/**
+ * enum clk_gen - GEN#0/GEN#1 clock schemes
+ * @GEN_OFF:
+ * @GEN_BOOT:
+ * @GEN_OPPT1:
+ */
+enum clk_gen {
+	GEN_OFF,
+	GEN_BOOT,
+	GEN_OPPT1,
+};
+
+/* some information between arm and xp70 */
+
+/**
+ * enum romcode_write - Romcode message written by A9 AND read by XP70
+ * @RDY_2_DS: Value set when ApDeepSleep state can be executed by XP70
+ * @RDY_2_XP70_RST: Value set when 0x0F has been successfully polled by the
+ *                 romcode. The xp70 will go into self-reset
+ */
+enum romcode_write {
+	RDY_2_DS = 0x09,
+	RDY_2_XP70_RST = 0x10
+};
+
+/**
+ * enum romcode_read - Romcode message written by XP70 and read by A9
+ * @INIT: Init value when romcode field is not used
+ * @FS_2_DS: Value set when power state is going from ApExecute to
+ *          ApDeepSleep
+ * @END_DS: Value set when ApDeepSleep power state is reached coming from
+ *         ApExecute state
+ * @DS_TO_FS: Value set when power state is going from ApDeepSleep to
+ *           ApExecute
+ * @END_FS: Value set when ApExecute power state is reached coming from
+ *         ApDeepSleep state
+ * @SWR: Value set when power state is going to ApReset
+ * @END_SWR: Value set when the xp70 finished executing ApReset actions and
+ *          waits for romcode acknowledgment to go to self-reset
+ */
+enum romcode_read {
+	INIT = 0x00,
+	FS_2_DS = 0x0A,
+	END_DS = 0x0B,
+	DS_TO_FS = 0x0C,
+	END_FS = 0x0D,
+	SWR = 0x0E,
+	END_SWR = 0x0F
+};
+
+/**
+ * enum ap_pwrst - current power states defined in PRCMU firmware
+ * @NO_PWRST: Current power state init
+ * @AP_BOOT: Current power state is apBoot
+ * @AP_EXECUTE: Current power state is apExecute
+ * @AP_DEEP_SLEEP: Current power state is apDeepSleep
+ * @AP_SLEEP: Current power state is apSleep
+ * @AP_IDLE: Current power state is apIdle
+ * @AP_RESET: Current power state is apReset
+ */
+enum ap_pwrst {
+	NO_PWRST = 0x00,
+	AP_BOOT = 0x01,
+	AP_EXECUTE = 0x02,
+	AP_DEEP_SLEEP = 0x03,
+	AP_SLEEP = 0x04,
+	AP_IDLE = 0x05,
+	AP_RESET = 0x06
+};
+
+/**
+ * enum ap_pwrst_trans - Transition states defined in PRCMU firmware
+ * @NO_TRANSITION: No power state transition
+ * @APEXECUTE_TO_APSLEEP: Power state transition from ApExecute to ApSleep
+ * @APIDLE_TO_APSLEEP: Power state transition from ApIdle to ApSleep
+ * @APBOOT_TO_APEXECUTE: Power state transition from ApBoot to ApExecute
+ * @APEXECUTE_TO_APDEEPSLEEP: Power state transition from ApExecute to
+ *                          ApDeepSleep
+ * @APEXECUTE_TO_APIDLE: Power state transition from ApExecute to ApIdle
+ */
+enum ap_pwrst_trans {
+	NO_TRANSITION			= 0x00,
+	APEXECUTE_TO_APSLEEP		= 0x01,
+	APIDLE_TO_APSLEEP		= 0x02, /* To be removed */
+	PRCMU_AP_SLEEP			= 0x01,
+	APBOOT_TO_APEXECUTE		= 0x03,
+	APEXECUTE_TO_APDEEPSLEEP	= 0x04, /* To be removed */
+	PRCMU_AP_DEEP_SLEEP		= 0x04,
+	APEXECUTE_TO_APIDLE		= 0x05, /* To be removed */
+	PRCMU_AP_IDLE			= 0x05,
+	PRCMU_AP_DEEP_IDLE		= 0x07,
+};
+
+/**
+ * enum ddr_pwrst - DDR power states definition
+ * @DDR_PWR_STATE_UNCHANGED: SDRAM and DDR controller state is unchanged
+ * @DDR_PWR_STATE_ON:
+ * @DDR_PWR_STATE_OFFLOWLAT:
+ * @DDR_PWR_STATE_OFFHIGHLAT:
+ */
+enum ddr_pwrst {
+	DDR_PWR_STATE_UNCHANGED     = 0x00,
+	DDR_PWR_STATE_ON            = 0x01,
+	DDR_PWR_STATE_OFFLOWLAT     = 0x02,
+	DDR_PWR_STATE_OFFHIGHLAT    = 0x03
+};
+
+/**
+ * enum arm_opp - ARM OPP states definition
+ * @ARM_OPP_INIT:
+ * @ARM_NO_CHANGE: The ARM operating point is unchanged
+ * @ARM_100_OPP: The new ARM operating point is arm100opp
+ * @ARM_50_OPP: The new ARM operating point is arm50opp
+ * @ARM_MAX_OPP: Operating point is "max" (more than 100)
+ * @ARM_MAX_FREQ100OPP: Set max opp if available, else 100
+ * @ARM_EXTCLK: The new ARM operating point is armExtClk
+ */
+enum arm_opp {
+	ARM_OPP_INIT = 0x00,
+	ARM_NO_CHANGE = 0x01,
+	ARM_100_OPP = 0x02,
+	ARM_50_OPP = 0x03,
+	ARM_MAX_OPP = 0x04,
+	ARM_MAX_FREQ100OPP = 0x05,
+	ARM_EXTCLK = 0x07
+};
+
+/**
+ * enum ape_opp - APE OPP states definition
+ * @APE_OPP_INIT:
+ * @APE_NO_CHANGE: The APE operating point is unchanged
+ * @APE_100_OPP: The new APE operating point is ape100opp
+ * @APE_50_OPP: 50%
+ */
+enum ape_opp {
+	APE_OPP_INIT = 0x00,
+	APE_NO_CHANGE = 0x01,
+	APE_100_OPP = 0x02,
+	APE_50_OPP = 0x03
+};
+
+/**
+ * enum hw_acc_state - State definition for hardware accelerator
+ * @HW_NO_CHANGE: The hardware accelerator state must remain unchanged
+ * @HW_OFF: The hardware accelerator must be switched off
+ * @HW_OFF_RAMRET: The hardware accelerator must be switched off with its
+ *               internal RAM in retention
+ * @HW_ON: The hwa hardware accelerator hwa must be switched on
+ *
+ * NOTE! Deprecated, to be removed when all users switched over to use the
+ * regulator API.
+ */
+enum hw_acc_state {
+	HW_NO_CHANGE = 0x00,
+	HW_OFF = 0x01,
+	HW_OFF_RAMRET = 0x02,
+	HW_ON = 0x04
+};
+
+/**
+ * enum  mbox_2_arm_stat - Status messages definition for mbox_arm
+ * @BOOT_TO_EXECUTEOK: The apBoot to apExecute state transition has been
+ *                    completed
+ * @DEEPSLEEPOK: The apExecute to apDeepSleep state transition has been
+ *              completed
+ * @SLEEPOK: The apExecute to apSleep state transition has been completed
+ * @IDLEOK: The apExecute to apIdle state transition has been completed
+ * @SOFTRESETOK: The A9 watchdog/ SoftReset state has been completed
+ * @SOFTRESETGO : The A9 watchdog/SoftReset state is on going
+ * @BOOT_TO_EXECUTE: The apBoot to apExecute state transition is on going
+ * @EXECUTE_TO_DEEPSLEEP: The apExecute to apDeepSleep state transition is on
+ *                       going
+ * @DEEPSLEEP_TO_EXECUTE: The apDeepSleep to apExecute state transition is on
+ *                       going
+ * @DEEPSLEEP_TO_EXECUTEOK: The apDeepSleep to apExecute state transition has
+ *                         been completed
+ * @EXECUTE_TO_SLEEP: The apExecute to apSleep state transition is on going
+ * @SLEEP_TO_EXECUTE: The apSleep to apExecute state transition is on going
+ * @SLEEP_TO_EXECUTEOK: The apSleep to apExecute state transition has been
+ *                     completed
+ * @EXECUTE_TO_IDLE: The apExecute to apIdle state transition is on going
+ * @IDLE_TO_EXECUTE: The apIdle to apExecute state transition is on going
+ * @IDLE_TO_EXECUTEOK: The apIdle to apExecute state transition has been
+ *                    completed
+ * @INIT_STATUS: Status init
+ */
+enum ap_pwrsttr_status {
+	BOOT_TO_EXECUTEOK = 0xFF,
+	DEEPSLEEPOK = 0xFE,
+	SLEEPOK = 0xFD,
+	IDLEOK = 0xFC,
+	SOFTRESETOK = 0xFB,
+	SOFTRESETGO = 0xFA,
+	BOOT_TO_EXECUTE = 0xF9,
+	EXECUTE_TO_DEEPSLEEP = 0xF8,
+	DEEPSLEEP_TO_EXECUTE = 0xF7,
+	DEEPSLEEP_TO_EXECUTEOK = 0xF6,
+	EXECUTE_TO_SLEEP = 0xF5,
+	SLEEP_TO_EXECUTE = 0xF4,
+	SLEEP_TO_EXECUTEOK = 0xF3,
+	EXECUTE_TO_IDLE = 0xF2,
+	IDLE_TO_EXECUTE = 0xF1,
+	IDLE_TO_EXECUTEOK = 0xF0,
+	RDYTODS_RETURNTOEXE    = 0xEF,
+	NORDYTODS_RETURNTOEXE  = 0xEE,
+	EXETOSLEEP_RETURNTOEXE = 0xED,
+	EXETOIDLE_RETURNTOEXE  = 0xEC,
+	INIT_STATUS = 0xEB,
+
+	/*error messages */
+	INITERROR                     = 0x00,
+	PLLARMLOCKP_ER                = 0x01,
+	PLLDDRLOCKP_ER                = 0x02,
+	PLLSOCLOCKP_ER                = 0x03,
+	PLLSOCK1LOCKP_ER              = 0x04,
+	ARMWFI_ER                     = 0x05,
+	SYSCLKOK_ER                   = 0x06,
+	I2C_NACK_DATA_ER              = 0x07,
+	BOOT_ER                       = 0x08,
+	I2C_STATUS_ALWAYS_1           = 0x0A,
+	I2C_NACK_REG_ADDR_ER          = 0x0B,
+	I2C_NACK_DATA0123_ER          = 0x1B,
+	I2C_NACK_ADDR_ER              = 0x1F,
+	CURAPPWRSTISNOT_BOOT          = 0x20,
+	CURAPPWRSTISNOT_EXECUTE       = 0x21,
+	CURAPPWRSTISNOT_SLEEPMODE     = 0x22,
+	CURAPPWRSTISNOT_CORRECTFORIT10 = 0x23,
+	FIFO4500WUISNOT_WUPEVENT      = 0x24,
+	PLL32KLOCKP_ER                = 0x29,
+	DDRDEEPSLEEPOK_ER             = 0x2A,
+	ROMCODEREADY_ER               = 0x50,
+	WUPBEFOREDS                   = 0x51,
+	DDRCONFIG_ER                  = 0x52,
+	WUPBEFORESLEEP                = 0x53,
+	WUPBEFOREIDLE                 = 0x54
+};  /* earlier called as  mbox_2_arm_stat */
+
+/**
+ * enum dvfs_stat - DVFS status messages definition
+ * @DVFS_GO: A state transition DVFS is on going
+ * @DVFS_ARM100OPPOK: The state transition DVFS has been completed for 100OPP
+ * @DVFS_ARM50OPPOK: The state transition DVFS has been completed for 50OPP
+ * @DVFS_ARMEXTCLKOK: The state transition DVFS has been completed for EXTCLK
+ * @DVFS_NOCHGTCLKOK: The state transition DVFS has been completed for
+ *                   NOCHGCLK
+ * @DVFS_INITSTATUS: Value init
+ */
+enum dvfs_stat {
+	DVFS_GO = 0xFF,
+	DVFS_ARM100OPPOK = 0xFE,
+	DVFS_ARM50OPPOK = 0xFD,
+	DVFS_ARMEXTCLKOK = 0xFC,
+	DVFS_NOCHGTCLKOK = 0xFB,
+	DVFS_INITSTATUS = 0x00
+};
+
+/**
+ * enum sva_mmdsp_stat - SVA MMDSP status messages
+ * @SVA_MMDSP_GO: SVAMMDSP interrupt has happened
+ * @SVA_MMDSP_INIT: Status init
+ */
+enum sva_mmdsp_stat {
+	SVA_MMDSP_GO = 0xFF,
+	SVA_MMDSP_INIT = 0x00
+};
+
+/**
+ * enum sia_mmdsp_stat - SIA MMDSP status messages
+ * @SIA_MMDSP_GO: SIAMMDSP interrupt has happened
+ * @SIA_MMDSP_INIT: Status init
+ */
+enum sia_mmdsp_stat {
+	SIA_MMDSP_GO = 0xFF,
+	SIA_MMDSP_INIT = 0x00
+};
+
+/**
+ * enum  mbox_to_arm_err - Error messages definition
+ * @INIT_ERR: Init value
+ * @PLLARMLOCKP_ERR: PLLARM has not been correctly locked in given time
+ * @PLLDDRLOCKP_ERR: PLLDDR has not been correctly locked in the given time
+ * @PLLSOC0LOCKP_ERR: PLLSOC0 has not been correctly locked in the given time
+ * @PLLSOC1LOCKP_ERR: PLLSOC1 has not been correctly locked in the given time
+ * @ARMWFI_ERR: The ARM WFI has not been correctly executed in the given time
+ * @SYSCLKOK_ERR: The SYSCLK is not available in the given time
+ * @BOOT_ERR: Romcode has not validated the XP70 self reset in the given time
+ * @ROMCODESAVECONTEXT: The Romcode didn.t correctly save it secure context
+ * @VARMHIGHSPEEDVALTO_ERR: The ARM high speed supply value transfered
+ *          through I2C has not been correctly executed in the given time
+ * @VARMHIGHSPEEDACCESS_ERR: The command value of VarmHighSpeedVal transfered
+ *             through I2C has not been correctly executed in the given time
+ * @VARMLOWSPEEDVALTO_ERR:The ARM low speed supply value transfered through
+ *                     I2C has not been correctly executed in the given time
+ * @VARMLOWSPEEDACCESS_ERR: The command value of VarmLowSpeedVal transfered
+ *             through I2C has not been correctly executed in the given time
+ * @VARMRETENTIONVALTO_ERR: The ARM retention supply value transfered through
+ *                     I2C has not been correctly executed in the given time
+ * @VARMRETENTIONACCESS_ERR: The command value of VarmRetentionVal transfered
+ *             through I2C has not been correctly executed in the given time
+ * @VAPEHIGHSPEEDVALTO_ERR: The APE highspeed supply value transfered through
+ *                     I2C has not been correctly executed in the given time
+ * @VSAFEHPVALTO_ERR: The SAFE high power supply value transfered through I2C
+ *                         has not been correctly executed in the given time
+ * @VMODSEL1VALTO_ERR: The MODEM sel1 supply value transfered through I2C has
+ *                             not been correctly executed in the given time
+ * @VMODSEL2VALTO_ERR: The MODEM sel2 supply value transfered through I2C has
+ *                             not been correctly executed in the given time
+ * @VARMOFFACCESS_ERR: The command value of Varm ON/OFF transfered through
+ *                     I2C has not been correctly executed in the given time
+ * @VAPEOFFACCESS_ERR: The command value of Vape ON/OFF transfered through
+ *                     I2C has not been correctly executed in the given time
+ * @VARMRETACCES_ERR: The command value of Varm retention ON/OFF transfered
+ *             through I2C has not been correctly executed in the given time
+ * @CURAPPWRSTISNOTBOOT:Generated when Arm want to do power state transition
+ *             ApBoot to ApExecute but the power current state is not Apboot
+ * @CURAPPWRSTISNOTEXECUTE: Generated when Arm want to do power state
+ *              transition from ApExecute to others power state but the
+ *              power current state is not ApExecute
+ * @CURAPPWRSTISNOTSLEEPMODE: Generated when wake up events are transmitted
+ *             but the power current state is not ApDeepSleep/ApSleep/ApIdle
+ * @CURAPPWRSTISNOTCORRECTDBG:  Generated when wake up events are transmitted
+ *              but the power current state is not correct
+ * @ARMREGU1VALTO_ERR:The ArmRegu1 value transferred through I2C has not
+ *                    been correctly executed in the given time
+ * @ARMREGU2VALTO_ERR: The ArmRegu2 value transferred through I2C has not
+ *                    been correctly executed in the given time
+ * @VAPEREGUVALTO_ERR: The VApeRegu value transfered through I2C has not
+ *                    been correctly executed in the given time
+ * @VSMPS3REGUVALTO_ERR: The VSmps3Regu value transfered through I2C has not
+ *                      been correctly executed in the given time
+ * @VMODREGUVALTO_ERR: The VModemRegu value transfered through I2C has not
+ *                    been correctly executed in the given time
+ */
+enum mbox_to_arm_err {
+	INIT_ERR = 0x00,
+	PLLARMLOCKP_ERR = 0x01,
+	PLLDDRLOCKP_ERR = 0x02,
+	PLLSOC0LOCKP_ERR = 0x03,
+	PLLSOC1LOCKP_ERR = 0x04,
+	ARMWFI_ERR = 0x05,
+	SYSCLKOK_ERR = 0x06,
+	BOOT_ERR = 0x07,
+	ROMCODESAVECONTEXT = 0x08,
+	VARMHIGHSPEEDVALTO_ERR = 0x10,
+	VARMHIGHSPEEDACCESS_ERR = 0x11,
+	VARMLOWSPEEDVALTO_ERR = 0x12,
+	VARMLOWSPEEDACCESS_ERR = 0x13,
+	VARMRETENTIONVALTO_ERR = 0x14,
+	VARMRETENTIONACCESS_ERR = 0x15,
+	VAPEHIGHSPEEDVALTO_ERR = 0x16,
+	VSAFEHPVALTO_ERR = 0x17,
+	VMODSEL1VALTO_ERR = 0x18,
+	VMODSEL2VALTO_ERR = 0x19,
+	VARMOFFACCESS_ERR = 0x1A,
+	VAPEOFFACCESS_ERR = 0x1B,
+	VARMRETACCES_ERR = 0x1C,
+	CURAPPWRSTISNOTBOOT = 0x20,
+	CURAPPWRSTISNOTEXECUTE = 0x21,
+	CURAPPWRSTISNOTSLEEPMODE = 0x22,
+	CURAPPWRSTISNOTCORRECTDBG = 0x23,
+	ARMREGU1VALTO_ERR = 0x24,
+	ARMREGU2VALTO_ERR = 0x25,
+	VAPEREGUVALTO_ERR = 0x26,
+	VSMPS3REGUVALTO_ERR = 0x27,
+	VMODREGUVALTO_ERR = 0x28
+};
+
+enum hw_acc {
+	SVAMMDSP = 0,
+	SVAPIPE = 1,
+	SIAMMDSP = 2,
+	SIAPIPE = 3,
+	SGA = 4,
+	B2R2MCDE = 5,
+	ESRAM12 = 6,
+	ESRAM34 = 7,
+};
+
+enum cs_pwrmgt {
+	PWRDNCS0  = 0,
+	WKUPCS0   = 1,
+	PWRDNCS1  = 2,
+	WKUPCS1   = 3
+};
+
+/* Defs related to autonomous power management */
+
+/**
+ * enum sia_sva_pwr_policy - Power policy
+ * @NO_CHGT:	No change
+ * @DSPOFF_HWPOFF:
+ * @DSPOFFRAMRET_HWPOFF:
+ * @DSPCLKOFF_HWPOFF:
+ * @DSPCLKOFF_HWPCLKOFF:
+ *
+ */
+enum sia_sva_pwr_policy {
+	NO_CHGT			= 0x0,
+	DSPOFF_HWPOFF		= 0x1,
+	DSPOFFRAMRET_HWPOFF	= 0x2,
+	DSPCLKOFF_HWPOFF	= 0x3,
+	DSPCLKOFF_HWPCLKOFF	= 0x4,
+};
+
+/**
+ * enum auto_enable - Auto Power enable
+ * @AUTO_OFF:
+ * @AUTO_ON:
+ *
+ */
+enum auto_enable {
+	AUTO_OFF	= 0x0,
+	AUTO_ON		= 0x1,
+};
+
+/* End of file previously known as prcmu-fw-defs_v1.h */
+
+/* PRCMU Wakeup defines */
+enum prcmu_wakeup_index {
+	PRCMU_WAKEUP_INDEX_RTC,
+	PRCMU_WAKEUP_INDEX_RTT0,
+	PRCMU_WAKEUP_INDEX_RTT1,
+	PRCMU_WAKEUP_INDEX_HSI0,
+	PRCMU_WAKEUP_INDEX_HSI1,
+	PRCMU_WAKEUP_INDEX_USB,
+	PRCMU_WAKEUP_INDEX_ABB,
+	PRCMU_WAKEUP_INDEX_ABB_FIFO,
+	PRCMU_WAKEUP_INDEX_ARM,
+	NUM_PRCMU_WAKEUP_INDICES
+};
+#define PRCMU_WAKEUP(_name) (BIT(PRCMU_WAKEUP_INDEX_##_name))
+
+/* PRCMU QoS APE OPP class */
+#define PRCMU_QOS_APE_OPP 1
+#define PRCMU_QOS_DDR_OPP 2
+#define PRCMU_QOS_DEFAULT_VALUE -1
+
+/**
+ * enum hw_acc_dev - enum for hw accelerators
+ * @HW_ACC_SVAMMDSP: for SVAMMDSP
+ * @HW_ACC_SVAPIPE:  for SVAPIPE
+ * @HW_ACC_SIAMMDSP: for SIAMMDSP
+ * @HW_ACC_SIAPIPE: for SIAPIPE
+ * @HW_ACC_SGA: for SGA
+ * @HW_ACC_B2R2: for B2R2
+ * @HW_ACC_MCDE: for MCDE
+ * @HW_ACC_ESRAM1: for ESRAM1
+ * @HW_ACC_ESRAM2: for ESRAM2
+ * @HW_ACC_ESRAM3: for ESRAM3
+ * @HW_ACC_ESRAM4: for ESRAM4
+ * @NUM_HW_ACC: number of hardware accelerators
+ *
+ * Different hw accelerators which can be turned ON/
+ * OFF or put into retention (MMDSPs and ESRAMs).
+ * Used with EPOD API.
+ *
+ * NOTE! Deprecated, to be removed when all users switched over to use the
+ * regulator API.
+ */
+enum hw_acc_dev {
+	HW_ACC_SVAMMDSP,
+	HW_ACC_SVAPIPE,
+	HW_ACC_SIAMMDSP,
+	HW_ACC_SIAPIPE,
+	HW_ACC_SGA,
+	HW_ACC_B2R2,
+	HW_ACC_MCDE,
+	HW_ACC_ESRAM1,
+	HW_ACC_ESRAM2,
+	HW_ACC_ESRAM3,
+	HW_ACC_ESRAM4,
+	NUM_HW_ACC
+};
+
+/*
+ * Ids for all EPODs (power domains)
+ * - EPOD_ID_SVAMMDSP: power domain for SVA MMDSP
+ * - EPOD_ID_SVAPIPE: power domain for SVA pipe
+ * - EPOD_ID_SIAMMDSP: power domain for SIA MMDSP
+ * - EPOD_ID_SIAPIPE: power domain for SIA pipe
+ * - EPOD_ID_SGA: power domain for SGA
+ * - EPOD_ID_B2R2_MCDE: power domain for B2R2 and MCDE
+ * - EPOD_ID_ESRAM12: power domain for ESRAM 1 and 2
+ * - EPOD_ID_ESRAM34: power domain for ESRAM 3 and 4
+ * - NUM_EPOD_ID: number of power domains
+ */
+#define EPOD_ID_SVAMMDSP	0
+#define EPOD_ID_SVAPIPE		1
+#define EPOD_ID_SIAMMDSP	2
+#define EPOD_ID_SIAPIPE		3
+#define EPOD_ID_SGA		4
+#define EPOD_ID_B2R2_MCDE	5
+#define EPOD_ID_ESRAM12		6
+#define EPOD_ID_ESRAM34		7
+#define NUM_EPOD_ID		8
+
+/*
+ * state definition for EPOD (power domain)
+ * - EPOD_STATE_NO_CHANGE: The EPOD should remain unchanged
+ * - EPOD_STATE_OFF: The EPOD is switched off
+ * - EPOD_STATE_RAMRET: The EPOD is switched off with its internal RAM in
+ *                         retention
+ * - EPOD_STATE_ON_CLK_OFF: The EPOD is switched on, clock is still off
+ * - EPOD_STATE_ON: Same as above, but with clock enabled
+ */
+#define EPOD_STATE_NO_CHANGE	0x00
+#define EPOD_STATE_OFF		0x01
+#define EPOD_STATE_RAMRET	0x02
+#define EPOD_STATE_ON_CLK_OFF	0x03
+#define EPOD_STATE_ON		0x04
+
+/*
+ * CLKOUT sources
+ */
+#define PRCMU_CLKSRC_CLK38M		0x00
+#define PRCMU_CLKSRC_ACLK		0x01
+#define PRCMU_CLKSRC_SYSCLK		0x02
+#define PRCMU_CLKSRC_LCDCLK		0x03
+#define PRCMU_CLKSRC_SDMMCCLK		0x04
+#define PRCMU_CLKSRC_TVCLK		0x05
+#define PRCMU_CLKSRC_TIMCLK		0x06
+#define PRCMU_CLKSRC_CLK009		0x07
+/* These are only valid for CLKOUT1: */
+#define PRCMU_CLKSRC_SIAMMDSPCLK	0x40
+#define PRCMU_CLKSRC_I2CCLK		0x41
+#define PRCMU_CLKSRC_MSP02CLK		0x42
+#define PRCMU_CLKSRC_ARMPLL_OBSCLK	0x43
+#define PRCMU_CLKSRC_HSIRXCLK		0x44
+#define PRCMU_CLKSRC_HSITXCLK		0x45
+#define PRCMU_CLKSRC_ARMCLKFIX		0x46
+#define PRCMU_CLKSRC_HDMICLK		0x47
+
+/*
+ * Definitions for autonomous power management configuration.
+ */
+
+#define PRCMU_AUTO_PM_OFF 0
+#define PRCMU_AUTO_PM_ON 1
+
+#define PRCMU_AUTO_PM_POWER_ON_HSEM BIT(0)
+#define PRCMU_AUTO_PM_POWER_ON_ABB_FIFO_IT BIT(1)
+
+enum prcmu_auto_pm_policy {
+	PRCMU_AUTO_PM_POLICY_NO_CHANGE,
+	PRCMU_AUTO_PM_POLICY_DSP_OFF_HWP_OFF,
+	PRCMU_AUTO_PM_POLICY_DSP_OFF_RAMRET_HWP_OFF,
+	PRCMU_AUTO_PM_POLICY_DSP_CLK_OFF_HWP_OFF,
+	PRCMU_AUTO_PM_POLICY_DSP_CLK_OFF_HWP_CLK_OFF,
+};
+
+/**
+ * struct prcmu_auto_pm_config - Autonomous power management configuration.
+ * @sia_auto_pm_enable: SIA autonomous pm enable. (PRCMU_AUTO_PM_{OFF,ON})
+ * @sia_power_on:       SIA power ON enable. (PRCMU_AUTO_PM_POWER_ON_* bitmask)
+ * @sia_policy:         SIA power policy. (enum prcmu_auto_pm_policy)
+ * @sva_auto_pm_enable: SVA autonomous pm enable. (PRCMU_AUTO_PM_{OFF,ON})
+ * @sva_power_on:       SVA power ON enable. (PRCMU_AUTO_PM_POWER_ON_* bitmask)
+ * @sva_policy:         SVA power policy. (enum prcmu_auto_pm_policy)
+ */
+struct prcmu_auto_pm_config {
+	u8 sia_auto_pm_enable;
+	u8 sia_power_on;
+	u8 sia_policy;
+	u8 sva_auto_pm_enable;
+	u8 sva_power_on;
+	u8 sva_policy;
+};
+
+/**
+ * enum ddr_opp - DDR OPP states definition
+ * @DDR_100_OPP: The new DDR operating point is ddr100opp
+ * @DDR_50_OPP: The new DDR operating point is ddr50opp
+ * @DDR_25_OPP: The new DDR operating point is ddr25opp
+ */
+enum ddr_opp {
+	DDR_100_OPP = 0x00,
+	DDR_50_OPP = 0x01,
+	DDR_25_OPP = 0x02,
+};
+
+/*
+ * Clock identifiers.
+ */
+enum prcmu_clock {
+	PRCMU_SGACLK,
+	PRCMU_UARTCLK,
+	PRCMU_MSP02CLK,
+	PRCMU_MSP1CLK,
+	PRCMU_I2CCLK,
+	PRCMU_SDMMCCLK,
+	PRCMU_SLIMCLK,
+	PRCMU_PER1CLK,
+	PRCMU_PER2CLK,
+	PRCMU_PER3CLK,
+	PRCMU_PER5CLK,
+	PRCMU_PER6CLK,
+	PRCMU_PER7CLK,
+	PRCMU_LCDCLK,
+	PRCMU_BMLCLK,
+	PRCMU_HSITXCLK,
+	PRCMU_HSIRXCLK,
+	PRCMU_HDMICLK,
+	PRCMU_APEATCLK,
+	PRCMU_APETRACECLK,
+	PRCMU_MCDECLK,
+	PRCMU_IPI2CCLK,
+	PRCMU_DSIALTCLK,
+	PRCMU_DMACLK,
+	PRCMU_B2R2CLK,
+	PRCMU_TVCLK,
+	PRCMU_SSPCLK,
+	PRCMU_RNGCLK,
+	PRCMU_UICCCLK,
+	PRCMU_NUM_REG_CLOCKS,
+	PRCMU_SYSCLK = PRCMU_NUM_REG_CLOCKS,
+	PRCMU_TIMCLK,
+};
+
+/*
+ * Definitions for controlling ESRAM0 in deep sleep.
+ */
+#define ESRAM0_DEEP_SLEEP_STATE_OFF 1
+#define ESRAM0_DEEP_SLEEP_STATE_RET 2
+
+#ifdef CONFIG_MFD_DB8500_PRCMU
+void __init prcmu_early_init(void);
+int prcmu_set_display_clocks(void);
+int prcmu_disable_dsipll(void);
+int prcmu_enable_dsipll(void);
+#else
+static inline void __init prcmu_early_init(void) {}
+#endif
+
+#ifdef CONFIG_MFD_DB8500_PRCMU
+
+int prcmu_set_rc_a2p(enum romcode_write);
+enum romcode_read prcmu_get_rc_p2a(void);
+enum ap_pwrst prcmu_get_xp70_current_state(void);
+int prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll);
+
+void prcmu_enable_wakeups(u32 wakeups);
+static inline void prcmu_disable_wakeups(void)
+{
+	prcmu_enable_wakeups(0);
+}
+
+void prcmu_config_abb_event_readout(u32 abb_events);
+void prcmu_get_abb_event_buffer(void __iomem **buf);
+int prcmu_set_arm_opp(u8 opp);
+int prcmu_get_arm_opp(void);
+bool prcmu_has_arm_maxopp(void);
+bool prcmu_is_u8400(void);
+int prcmu_set_ape_opp(u8 opp);
+int prcmu_get_ape_opp(void);
+int prcmu_request_ape_opp_100_voltage(bool enable);
+int prcmu_release_usb_wakeup_state(void);
+int prcmu_set_ddr_opp(u8 opp);
+int prcmu_get_ddr_opp(void);
+unsigned long prcmu_qos_get_cpufreq_opp_delay(void);
+void prcmu_qos_set_cpufreq_opp_delay(unsigned long);
+/* NOTE! Use regulator framework instead */
+int prcmu_set_hwacc(u16 hw_acc_dev, u8 state);
+int prcmu_set_epod(u16 epod_id, u8 epod_state);
+void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep,
+	struct prcmu_auto_pm_config *idle);
+bool prcmu_is_auto_pm_enabled(void);
+
+int prcmu_config_clkout(u8 clkout, u8 source, u8 div);
+int prcmu_request_clock(u8 clock, bool enable);
+int prcmu_set_clock_divider(u8 clock, u8 divider);
+int prcmu_config_esram0_deep_sleep(u8 state);
+int prcmu_config_hotdog(u8 threshold);
+int prcmu_config_hotmon(u8 low, u8 high);
+int prcmu_start_temp_sense(u16 cycles32k);
+int prcmu_stop_temp_sense(void);
+int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);
+int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size);
+
+void prcmu_ac_wake_req(void);
+void prcmu_ac_sleep_req(void);
+void prcmu_system_reset(u16 reset_code);
+void prcmu_modem_reset(void);
+bool prcmu_is_ac_wake_requested(void);
+void prcmu_enable_spi2(void);
+void prcmu_disable_spi2(void);
+
+#else /* !CONFIG_MFD_DB8500_PRCMU */
+
+static inline int prcmu_set_rc_a2p(enum romcode_write code)
+{
+	return 0;
+}
+
+static inline enum romcode_read prcmu_get_rc_p2a(void)
+{
+	return INIT;
+}
+
+static inline enum ap_pwrst prcmu_get_xp70_current_state(void)
+{
+	return AP_EXECUTE;
+}
+
+static inline int prcmu_set_power_state(u8 state, bool keep_ulp_clk,
+	bool keep_ap_pll)
+{
+	return 0;
+}
+
+static inline void prcmu_enable_wakeups(u32 wakeups) {}
+
+static inline void prcmu_disable_wakeups(void) {}
+
+static inline void prcmu_config_abb_event_readout(u32 abb_events) {}
+
+static inline int prcmu_set_arm_opp(u8 opp)
+{
+	return 0;
+}
+
+static inline int prcmu_get_arm_opp(void)
+{
+	return ARM_100_OPP;
+}
+
+static bool prcmu_has_arm_maxopp(void)
+{
+	return false;
+}
+
+static bool prcmu_is_u8400(void)
+{
+	return false;
+}
+
+static inline int prcmu_set_ape_opp(u8 opp)
+{
+	return 0;
+}
+
+static inline int prcmu_get_ape_opp(void)
+{
+	return APE_100_OPP;
+}
+
+static inline int prcmu_request_ape_opp_100_voltage(bool enable)
+{
+	return 0;
+}
+
+static inline int prcmu_release_usb_wakeup_state(void)
+{
+	return 0;
+}
+
+static inline int prcmu_set_ddr_opp(u8 opp)
+{
+	return 0;
+}
+
+static inline int prcmu_get_ddr_opp(void)
+{
+	return DDR_100_OPP;
+}
+
+static inline unsigned long prcmu_qos_get_cpufreq_opp_delay(void)
+{
+	return 0;
+}
+
+static inline void prcmu_qos_set_cpufreq_opp_delay(unsigned long n) {}
+
+static inline int prcmu_set_hwacc(u16 hw_acc_dev, u8 state)
+{
+	return 0;
+}
+
+static inline void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep,
+	struct prcmu_auto_pm_config *idle)
+{
+}
+
+static inline bool prcmu_is_auto_pm_enabled(void)
+{
+	return false;
+}
+
+static inline int prcmu_config_clkout(u8 clkout, u8 source, u8 div)
+{
+	return 0;
+}
+
+static inline int prcmu_request_clock(u8 clock, bool enable)
+{
+	return 0;
+}
+
+static inline int prcmu_set_clock_divider(u8 clock, u8 divider)
+{
+	return 0;
+}
+
+int prcmu_config_esram0_deep_sleep(u8 state)
+{
+	return 0;
+}
+
+static inline int prcmu_config_hotdog(u8 threshold)
+{
+	return 0;
+}
+
+static inline int prcmu_config_hotmon(u8 low, u8 high)
+{
+	return 0;
+}
+
+static inline int prcmu_start_temp_sense(u16 cycles32k)
+{
+	return 0;
+}
+
+static inline int prcmu_stop_temp_sense(void)
+{
+	return 0;
+}
+
+static inline int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
+{
+	return -ENOSYS;
+}
+
+static inline int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
+{
+	return -ENOSYS;
+}
+
+static inline void prcmu_ac_wake_req(void) {}
+
+static inline void prcmu_ac_sleep_req(void) {}
+
+static inline void prcmu_system_reset(u16 reset_code) {}
+
+static inline void prcmu_modem_reset(void) {}
+
+static inline bool prcmu_is_ac_wake_requested(void)
+{
+	return false;
+}
+
+#ifndef CONFIG_UX500_SOC_DB5500
+static inline int prcmu_set_display_clocks(void)
+{
+	return 0;
+}
+
+static inline int prcmu_disable_dsipll(void)
+{
+	return 0;
+}
+
+static inline int prcmu_enable_dsipll(void)
+{
+	return 0;
+}
+#endif
+
+static inline int prcmu_enable_spi2(void)
+{
+	return 0;
+}
+
+static inline int prcmu_disable_spi2(void)
+{
+	return 0;
+}
+
+#endif /* !CONFIG_MFD_DB8500_PRCMU */
+
+#ifdef CONFIG_UX500_PRCMU_QOS_POWER
+int prcmu_qos_requirement(int pm_qos_class);
+int prcmu_qos_add_requirement(int pm_qos_class, char *name, s32 value);
+int prcmu_qos_update_requirement(int pm_qos_class, char *name, s32 new_value);
+void prcmu_qos_remove_requirement(int pm_qos_class, char *name);
+int prcmu_qos_add_notifier(int prcmu_qos_class,
+			   struct notifier_block *notifier);
+int prcmu_qos_remove_notifier(int prcmu_qos_class,
+			      struct notifier_block *notifier);
+#else
+static inline int prcmu_qos_requirement(int prcmu_qos_class)
+{
+	return 0;
+}
+
+static inline int prcmu_qos_add_requirement(int prcmu_qos_class,
+					    char *name, s32 value)
+{
+	return 0;
+}
+
+static inline int prcmu_qos_update_requirement(int prcmu_qos_class,
+					       char *name, s32 new_value)
+{
+	return 0;
+}
+
+static inline void prcmu_qos_remove_requirement(int prcmu_qos_class, char *name)
+{
+}
+
+static inline int prcmu_qos_add_notifier(int prcmu_qos_class,
+					 struct notifier_block *notifier)
+{
+	return 0;
+}
+static inline int prcmu_qos_remove_notifier(int prcmu_qos_class,
+					    struct notifier_block *notifier)
+{
+	return 0;
+}
+
+#endif
+
+#endif /* __MFD_DB8500_PRCMU_H */
diff --git a/include/linux/regulator/db8500-prcmu.h b/include/linux/regulator/db8500-prcmu.h
new file mode 100644
index 00000000000..612062313b6
--- /dev/null
+++ b/include/linux/regulator/db8500-prcmu.h
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * Author: Bengt Jonsson <bengt.g.jonsson@stericsson.com> for ST-Ericsson
+ *
+ * Interface to power domain regulators on DB8500
+ */
+
+#ifndef __REGULATOR_H__
+#define __REGULATOR_H__
+
+/* Number of DB8500 regulators and regulator enumeration */
+enum db8500_regulator_id {
+	DB8500_REGULATOR_VAPE,
+	DB8500_REGULATOR_VARM,
+	DB8500_REGULATOR_VMODEM,
+	DB8500_REGULATOR_VPLL,
+	DB8500_REGULATOR_VSMPS1,
+	DB8500_REGULATOR_VSMPS2,
+	DB8500_REGULATOR_VSMPS3,
+	DB8500_REGULATOR_VRF1,
+	DB8500_REGULATOR_SWITCH_SVAMMDSP,
+	DB8500_REGULATOR_SWITCH_SVAMMDSPRET,
+	DB8500_REGULATOR_SWITCH_SVAPIPE,
+	DB8500_REGULATOR_SWITCH_SIAMMDSP,
+	DB8500_REGULATOR_SWITCH_SIAMMDSPRET,
+	DB8500_REGULATOR_SWITCH_SIAPIPE,
+	DB8500_REGULATOR_SWITCH_SGA,
+	DB8500_REGULATOR_SWITCH_B2R2_MCDE,
+	DB8500_REGULATOR_SWITCH_ESRAM12,
+	DB8500_REGULATOR_SWITCH_ESRAM12RET,
+	DB8500_REGULATOR_SWITCH_ESRAM34,
+	DB8500_REGULATOR_SWITCH_ESRAM34RET,
+	DB8500_NUM_REGULATORS
+};
+
+/*
+ * Exported interface for CPUIdle only. This function is called with all
+ * interrupts turned off.
+ */
+int power_state_active_is_enabled(void);
+
+#endif
author	Linus Torvalds <torvalds@linux-foundation.org>	2011-05-25 15:35:03 -0700
committer	Linus Torvalds <torvalds@linux-foundation.org>	2011-05-25 15:35:03 -0700
commit	ad363e0916423b2e6cdfcdc30ae707ec709f0a65 (patch)
tree	c47cc9062f7adc0ceb27f634b63b8548b733f01c
parent	ed0795aa12129df9f3d2cc81ee579a9e54e12885 (diff)
parent	1032fbfd792f2b384ac16a63993b8fae5eea9083 (diff)