aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@woody.linux-foundation.org>2007-05-05 13:30:44 -0700
committerLinus Torvalds <torvalds@woody.linux-foundation.org>2007-05-05 13:30:44 -0700
commit4f7a307dc6e4d8bfeb56f7cf7231b08cb845687c (patch)
tree3bf90522c87fcb32373cb2a5ff25b1ead33405f5
parentfabb5c4e4a474ff0f7d6c1d3466a1b79bbce5f49 (diff)
parent7297824581755593535fc97d2c8b6c47e2dc2db6 (diff)
Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (87 commits) [SCSI] fusion: fix domain validation loops [SCSI] qla2xxx: fix regression on sparc64 [SCSI] modalias for scsi devices [SCSI] sg: cap reserved_size values at max_sectors [SCSI] BusLogic: stop using check_region [SCSI] tgt: fix rdma transfer bugs [SCSI] aacraid: fix aacraid not finding device [SCSI] aacraid: Correct SMC products in aacraid.txt [SCSI] scsi_error.c: Add EH Start Unit retry [SCSI] aacraid: [Fastboot] Panics for AACRAID driver during 'insmod' for kexec test. [SCSI] ipr: Driver version to 2.3.2 [SCSI] ipr: Faster sg list fetch [SCSI] ipr: Return better qc_issue errors [SCSI] ipr: Disrupt device error [SCSI] ipr: Improve async error logging level control [SCSI] ipr: PCI unblock config access fix [SCSI] ipr: Fix for oops following SATA request sense [SCSI] ipr: Log error for SAS dual path switch [SCSI] ipr: Enable logging of debug error data for all devices [SCSI] ipr: Add new PCI-E IDs to device table ...
-rw-r--r--Documentation/scsi/aacraid.txt7
-rw-r--r--Documentation/scsi/ncr53c8xx.txt5
-rw-r--r--block/ll_rw_blk.c2
-rw-r--r--block/scsi_ioctl.c4
-rw-r--r--drivers/infiniband/ulp/iser/iser_initiator.c2
-rw-r--r--drivers/message/fusion/mptbase.c27
-rw-r--r--drivers/message/fusion/mptbase.h1
-rw-r--r--drivers/message/fusion/mptscsih.c35
-rw-r--r--drivers/message/fusion/mptspi.c36
-rw-r--r--drivers/s390/scsi/zfcp_erp.c2
-rw-r--r--drivers/s390/scsi/zfcp_fsf.c10
-rw-r--r--drivers/scsi/BusLogic.c73
-rw-r--r--drivers/scsi/Kconfig22
-rw-r--r--drivers/scsi/Makefile2
-rw-r--r--drivers/scsi/aacraid/aachba.c402
-rw-r--r--drivers/scsi/aacraid/aacraid.h76
-rw-r--r--drivers/scsi/aacraid/commctrl.c286
-rw-r--r--drivers/scsi/aacraid/comminit.c4
-rw-r--r--drivers/scsi/aacraid/commsup.c112
-rw-r--r--drivers/scsi/aacraid/dpcsup.c35
-rw-r--r--drivers/scsi/aacraid/linit.c65
-rw-r--r--drivers/scsi/aacraid/nark.c3
-rw-r--r--drivers/scsi/aacraid/rkt.c3
-rw-r--r--drivers/scsi/aacraid/rx.c115
-rw-r--r--drivers/scsi/aic7xxx/Kconfig.aic79xx12
-rw-r--r--drivers/scsi/aic7xxx/Kconfig.aic7xxx10
-rw-r--r--drivers/scsi/aic7xxx/aic79xx_osm.c6
-rw-r--r--drivers/scsi/aic7xxx/aic79xx_osm.h2
-rw-r--r--drivers/scsi/aic7xxx/aic7xxx.h5
-rw-r--r--drivers/scsi/aic7xxx/aic7xxx_core.c2
-rw-r--r--drivers/scsi/constants.c274
-rw-r--r--drivers/scsi/dpt/dpti_i2o.h48
-rw-r--r--drivers/scsi/dpt/dpti_ioctl.h2
-rw-r--r--drivers/scsi/dpt/dptsig.h4
-rw-r--r--drivers/scsi/dpt_i2o.c2
-rw-r--r--drivers/scsi/eata_generic.h7
-rw-r--r--drivers/scsi/ibmvscsi/ibmvscsi.c80
-rw-r--r--drivers/scsi/ibmvscsi/ibmvscsi.h2
-rw-r--r--drivers/scsi/ibmvscsi/ibmvstgt.c37
-rw-r--r--drivers/scsi/ipr.c290
-rw-r--r--drivers/scsi/ipr.h45
-rw-r--r--drivers/scsi/iscsi_tcp.c21
-rw-r--r--drivers/scsi/libiscsi.c29
-rw-r--r--drivers/scsi/libsrp.c12
-rw-r--r--drivers/scsi/lpfc/lpfc_init.c2
-rw-r--r--drivers/scsi/osst.c1
-rw-r--r--drivers/scsi/pci2000.h197
-rw-r--r--drivers/scsi/pcmcia/Kconfig9
-rw-r--r--drivers/scsi/qla2xxx/qla_def.h13
-rw-r--r--drivers/scsi/qla2xxx/qla_init.c177
-rw-r--r--drivers/scsi/qla2xxx/qla_mbx.c16
-rw-r--r--drivers/scsi/qla2xxx/qla_os.c7
-rw-r--r--drivers/scsi/qla2xxx/qla_sup.c11
-rw-r--r--drivers/scsi/qla2xxx/qla_version.h2
-rw-r--r--drivers/scsi/scsi.c47
-rw-r--r--drivers/scsi/scsi_error.c19
-rw-r--r--drivers/scsi/scsi_lib.c8
-rw-r--r--drivers/scsi/scsi_scan.c2
-rw-r--r--drivers/scsi/scsi_sysfs.c54
-rw-r--r--drivers/scsi/scsi_tgt_if.c6
-rw-r--r--drivers/scsi/scsi_tgt_lib.c261
-rw-r--r--drivers/scsi/scsi_tgt_priv.h5
-rw-r--r--drivers/scsi/scsi_transport_fc.c2
-rw-r--r--drivers/scsi/scsi_transport_iscsi.c6
-rw-r--r--drivers/scsi/sd.c405
-rw-r--r--drivers/scsi/sg.c13
-rw-r--r--drivers/scsi/sr.c2
-rw-r--r--drivers/scsi/st.c1
-rw-r--r--include/scsi/iscsi_proto.h12
-rw-r--r--include/scsi/scsi.h1
-rw-r--r--include/scsi/scsi_cmnd.h3
-rw-r--r--include/scsi/scsi_dbg.h10
-rw-r--r--include/scsi/scsi_device.h14
-rw-r--r--include/scsi/scsi_host.h32
-rw-r--r--include/scsi/scsi_tgt_if.h6
-rw-r--r--include/scsi/scsi_transport_fc.h2
-rw-r--r--include/scsi/sd.h72
77 files changed, 1984 insertions, 1653 deletions
diff --git a/Documentation/scsi/aacraid.txt b/Documentation/scsi/aacraid.txt
index dc8e44fc650..2368e7e4a8c 100644
--- a/Documentation/scsi/aacraid.txt
+++ b/Documentation/scsi/aacraid.txt
@@ -37,7 +37,11 @@ Supported Cards/Chipsets
9005:0286:9005:029d Adaptec 2420SA (Intruder HP release)
9005:0286:9005:02ac Adaptec 1800 (Typhoon44)
9005:0285:9005:02b5 Adaptec 5445 (Voodoo44)
+ 9005:0285:15d9:02b5 SMC AOC-USAS-S4i
+ 9005:0285:15d9:02c9 SMC AOC-USAS-S4iR
9005:0285:9005:02b6 Adaptec 5805 (Voodoo80)
+ 9005:0285:15d9:02b6 SMC AOC-USAS-S8i
+ 9005:0285:15d9:02ca SMC AOC-USAS-S8iR
9005:0285:9005:02b7 Adaptec 5085 (Voodoo08)
9005:0285:9005:02bb Adaptec 3405 (Marauder40LP)
9005:0285:9005:02bc Adaptec 3805 (Marauder80LP)
@@ -93,6 +97,9 @@ Supported Cards/Chipsets
9005:0286:9005:02ae (Aurora Lite ARK)
9005:0285:9005:02b0 (Sunrise Lake ARK)
9005:0285:9005:02b1 Adaptec (Voodoo 8 internal 8 external)
+ 9005:0285:108e:7aac SUN STK RAID REM (Voodoo44 Coyote)
+ 9005:0285:108e:0286 SUN SG-XPCIESAS-R-IN (Cougar)
+ 9005:0285:108e:0287 SUN SG-XPCIESAS-R-EX (Prometheus)
People
-------------------------
diff --git a/Documentation/scsi/ncr53c8xx.txt b/Documentation/scsi/ncr53c8xx.txt
index caf10b15518..88ef88b949f 100644
--- a/Documentation/scsi/ncr53c8xx.txt
+++ b/Documentation/scsi/ncr53c8xx.txt
@@ -562,11 +562,6 @@ if only one has a flaw for some SCSI feature, you can disable the
support by the driver of this feature at linux start-up and enable
this feature after boot-up only for devices that support it safely.
-CONFIG_SCSI_NCR53C8XX_PROFILE_SUPPORT (default answer: n)
- This option must be set for profiling information to be gathered
- and printed out through the proc file system. This features may
- impact performances.
-
CONFIG_SCSI_NCR53C8XX_IOMAPPED (default answer: n)
Answer "y" if you suspect your mother board to not allow memory mapped I/O.
May slow down performance a little. This option is required by
diff --git a/block/ll_rw_blk.c b/block/ll_rw_blk.c
index 123003a9047..5873861e1db 100644
--- a/block/ll_rw_blk.c
+++ b/block/ll_rw_blk.c
@@ -1925,6 +1925,8 @@ blk_init_queue_node(request_fn_proc *rfn, spinlock_t *lock, int node_id)
blk_queue_max_hw_segments(q, MAX_HW_SEGMENTS);
blk_queue_max_phys_segments(q, MAX_PHYS_SEGMENTS);
+ q->sg_reserved_size = INT_MAX;
+
/*
* all done
*/
diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c
index 65c6a3cba6d..e83f1dbf7c2 100644
--- a/block/scsi_ioctl.c
+++ b/block/scsi_ioctl.c
@@ -78,7 +78,9 @@ static int sg_set_timeout(request_queue_t *q, int __user *p)
static int sg_get_reserved_size(request_queue_t *q, int __user *p)
{
- return put_user(q->sg_reserved_size, p);
+ unsigned val = min(q->sg_reserved_size, q->max_sectors << 9);
+
+ return put_user(val, p);
}
static int sg_set_reserved_size(request_queue_t *q, int __user *p)
diff --git a/drivers/infiniband/ulp/iser/iser_initiator.c b/drivers/infiniband/ulp/iser/iser_initiator.c
index 278fcbccc2d..3651072f6c1 100644
--- a/drivers/infiniband/ulp/iser/iser_initiator.c
+++ b/drivers/infiniband/ulp/iser/iser_initiator.c
@@ -201,7 +201,7 @@ static int iser_post_receive_control(struct iscsi_conn *conn)
* what's common for both schemes is that the connection is not started
*/
if (conn->c_stage != ISCSI_CONN_STARTED)
- rx_data_size = DEFAULT_MAX_RECV_DATA_SEGMENT_LENGTH;
+ rx_data_size = ISCSI_DEF_MAX_RECV_SEG_LEN;
else /* FIXME till user space sets conn->max_recv_dlength correctly */
rx_data_size = 128;
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index 083acfd91d8..97471af4309 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -1531,6 +1531,7 @@ mpt_resume(struct pci_dev *pdev)
MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
u32 device_state = pdev->current_state;
int recovery_state;
+ int err;
printk(MYIOC_s_INFO_FMT
"pci-resume: pdev=0x%p, slot=%s, Previous operating state [D%d]\n",
@@ -1538,7 +1539,9 @@ mpt_resume(struct pci_dev *pdev)
pci_set_power_state(pdev, 0);
pci_restore_state(pdev);
- pci_enable_device(pdev);
+ err = pci_enable_device(pdev);
+ if (err)
+ return err;
/* enable interrupts */
CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM);
@@ -4739,12 +4742,8 @@ mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum)
}
/**
- * mpt_inactive_raid_list_free
- *
- * This clears this link list.
- *
- * @ioc - pointer to per adapter structure
- *
+ * mpt_inactive_raid_list_free - This clears this link list.
+ * @ioc : pointer to per adapter structure
**/
static void
mpt_inactive_raid_list_free(MPT_ADAPTER *ioc)
@@ -4764,15 +4763,11 @@ mpt_inactive_raid_list_free(MPT_ADAPTER *ioc)
}
/**
- * mpt_inactive_raid_volumes
- *
- * This sets up link list of phy_disk_nums for devices belonging in an inactive volume
- *
- * @ioc - pointer to per adapter structure
- * @channel - volume channel
- * @id - volume target id
- *
+ * mpt_inactive_raid_volumes - sets up link list of phy_disk_nums for devices belonging in an inactive volume
*
+ * @ioc : pointer to per adapter structure
+ * @channel : volume channel
+ * @id : volume target id
**/
static void
mpt_inactive_raid_volumes(MPT_ADAPTER *ioc, u8 channel, u8 id)
@@ -6663,7 +6658,7 @@ union loginfo_type {
/**
* mpt_iocstatus_info_config - IOCSTATUS information for config pages
* @ioc: Pointer to MPT_ADAPTER structure
- * ioc_status: U32 IOCStatus word from IOC
+ * @ioc_status: U32 IOCStatus word from IOC
* @mf: Pointer to MPT request frame
*
* Refer to lsi/mpi.h.
diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h
index e3a39272aad..d25d3be8fcd 100644
--- a/drivers/message/fusion/mptbase.h
+++ b/drivers/message/fusion/mptbase.h
@@ -994,6 +994,7 @@ typedef struct _MPT_SCSI_HOST {
int scandv_wait_done;
long last_queue_full;
u16 tm_iocstatus;
+ u16 spi_pending;
struct list_head target_reset_list;
} MPT_SCSI_HOST;
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index 2a3e9e66d4e..fa0f7761652 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -819,10 +819,7 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
sc->resid=0;
case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */
case MPI_IOCSTATUS_SUCCESS: /* 0x0000 */
- if (scsi_status == MPI_SCSI_STATUS_BUSY)
- sc->result = (DID_BUS_BUSY << 16) | scsi_status;
- else
- sc->result = (DID_OK << 16) | scsi_status;
+ sc->result = (DID_OK << 16) | scsi_status;
if (scsi_state == 0) {
;
} else if (scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID) {
@@ -1188,20 +1185,7 @@ mptscsih_suspend(struct pci_dev *pdev, pm_message_t state)
int
mptscsih_resume(struct pci_dev *pdev)
{
- MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
- struct Scsi_Host *host = ioc->sh;
- MPT_SCSI_HOST *hd;
-
- mpt_resume(pdev);
-
- if(!host)
- return 0;
-
- hd = (MPT_SCSI_HOST *)host->hostdata;
- if(!hd)
- return 0;
-
- return 0;
+ return mpt_resume(pdev);
}
#endif
@@ -1537,21 +1521,23 @@ mptscsih_freeChainBuffers(MPT_ADAPTER *ioc, int req_idx)
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
* mptscsih_TMHandler - Generic handler for SCSI Task Management.
- * Fall through to mpt_HardResetHandler if: not operational, too many
- * failed TM requests or handshake failure.
- *
- * @ioc: Pointer to MPT_ADAPTER structure
+ * @hd: Pointer to MPT SCSI HOST structure
* @type: Task Management type
+ * @channel: channel number for task management
* @id: Logical Target ID for reset (if appropriate)
* @lun: Logical Unit for reset (if appropriate)
* @ctx2abort: Context for the task to be aborted (if appropriate)
+ * @timeout: timeout for task management control
+ *
+ * Fall through to mpt_HardResetHandler if: not operational, too many
+ * failed TM requests or handshake failure.
*
* Remark: Currently invoked from a non-interrupt thread (_bh).
*
* Remark: With old EH code, at most 1 SCSI TaskMgmt function per IOC
* will be active.
*
- * Returns 0 for SUCCESS, or FAILED.
+ * Returns 0 for SUCCESS, or %FAILED.
**/
int
mptscsih_TMHandler(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, int lun, int ctx2abort, ulong timeout)
@@ -1650,9 +1636,11 @@ mptscsih_TMHandler(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, int lun, int c
* mptscsih_IssueTaskMgmt - Generic send Task Management function.
* @hd: Pointer to MPT_SCSI_HOST structure
* @type: Task Management type
+ * @channel: channel number for task management
* @id: Logical Target ID for reset (if appropriate)
* @lun: Logical Unit for reset (if appropriate)
* @ctx2abort: Context for the task to be aborted (if appropriate)
+ * @timeout: timeout for task management control
*
* Remark: _HardResetHandler can be invoked from an interrupt thread (timer)
* or a non-interrupt thread. In the former, must not call schedule().
@@ -2022,6 +2010,7 @@ mptscsih_tm_pending_wait(MPT_SCSI_HOST * hd)
/**
* mptscsih_tm_wait_for_completion - wait for completion of TM task
* @hd: Pointer to MPT host structure.
+ * @timeout: timeout value
*
* Returns {SUCCESS,FAILED}.
*/
diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c
index 85f21b54cb7..d75f7ffbb02 100644
--- a/drivers/message/fusion/mptspi.c
+++ b/drivers/message/fusion/mptspi.c
@@ -96,14 +96,13 @@ static int mptspiTaskCtx = -1;
static int mptspiInternalCtx = -1; /* Used only for internal commands */
/**
- * mptspi_setTargetNegoParms - Update the target negotiation
- * parameters based on the the Inquiry data, adapter capabilities,
- * and NVRAM settings
- *
+ * mptspi_setTargetNegoParms - Update the target negotiation parameters
* @hd: Pointer to a SCSI Host Structure
- * @vtarget: per target private data
+ * @target: per target private data
* @sdev: SCSI device
*
+ * Update the target negotiation parameters based on the the Inquiry
+ * data, adapter capabilities, and NVRAM settings.
**/
static void
mptspi_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtTarget *target,
@@ -234,7 +233,7 @@ mptspi_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtTarget *target,
/**
* mptspi_writeIOCPage4 - write IOC Page 4
* @hd: Pointer to a SCSI Host Structure
- * @channel:
+ * @channel: channel number
* @id: write IOC Page4 for this ID & Bus
*
* Return: -EAGAIN if unable to obtain a Message Frame
@@ -446,7 +445,7 @@ static int mptspi_target_alloc(struct scsi_target *starget)
return 0;
}
-void
+static void
mptspi_target_destroy(struct scsi_target *starget)
{
if (starget->hostdata)
@@ -677,7 +676,9 @@ static void mptspi_dv_device(struct _MPT_SCSI_HOST *hd,
return;
}
+ hd->spi_pending |= (1 << sdev->id);
spi_dv_device(sdev);
+ hd->spi_pending &= ~(1 << sdev->id);
if (sdev->channel == 1 &&
mptscsih_quiesce_raid(hd, 0, vtarget->channel, vtarget->id) < 0)
@@ -1203,11 +1204,27 @@ mptspi_dv_renegotiate_work(struct work_struct *work)
container_of(work, struct work_queue_wrapper, work);
struct _MPT_SCSI_HOST *hd = wqw->hd;
struct scsi_device *sdev;
+ struct scsi_target *starget;
+ struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1;
+ u32 nego;
kfree(wqw);
- shost_for_each_device(sdev, hd->ioc->sh)
- mptspi_dv_device(hd, sdev);
+ if (hd->spi_pending) {
+ shost_for_each_device(sdev, hd->ioc->sh) {
+ if (hd->spi_pending & (1 << sdev->id))
+ continue;
+ starget = scsi_target(sdev);
+ nego = mptspi_getRP(starget);
+ pg1.RequestedParameters = cpu_to_le32(nego);
+ pg1.Reserved = 0;
+ pg1.Configuration = 0;
+ mptspi_write_spi_device_pg1(starget, &pg1);
+ }
+ } else {
+ shost_for_each_device(sdev, hd->ioc->sh)
+ mptspi_dv_device(hd, sdev);
+ }
}
static void
@@ -1453,6 +1470,7 @@ mptspi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
init_waitqueue_head(&hd->scandv_waitq);
hd->scandv_wait_done = 0;
hd->last_queue_full = 0;
+ hd->spi_pending = 0;
/* Some versions of the firmware don't support page 0; without
* that we can't get the parameters */
diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c
index 421da1e7c0e..c1f2d4b14c2 100644
--- a/drivers/s390/scsi/zfcp_erp.c
+++ b/drivers/s390/scsi/zfcp_erp.c
@@ -186,7 +186,7 @@ void zfcp_fsf_start_timer(struct zfcp_fsf_req *fsf_req, unsigned long timeout)
{
fsf_req->timer.function = zfcp_fsf_request_timeout_handler;
fsf_req->timer.data = (unsigned long) fsf_req->adapter;
- fsf_req->timer.expires = timeout;
+ fsf_req->timer.expires = jiffies + timeout;
add_timer(&fsf_req->timer);
}
diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index ef16f7ca4bb..4c0a59afd5c 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -299,9 +299,10 @@ zfcp_fsf_protstatus_eval(struct zfcp_fsf_req *fsf_req)
}
/* log additional information provided by FSF (if any) */
- if (unlikely(qtcb->header.log_length)) {
+ if (likely(qtcb->header.log_length)) {
/* do not trust them ;-) */
- if (qtcb->header.log_start > sizeof(struct fsf_qtcb)) {
+ if (unlikely(qtcb->header.log_start >
+ sizeof(struct fsf_qtcb))) {
ZFCP_LOG_NORMAL
("bug: ULP (FSF logging) log data starts "
"beyond end of packet header. Ignored. "
@@ -310,8 +311,9 @@ zfcp_fsf_protstatus_eval(struct zfcp_fsf_req *fsf_req)
sizeof(struct fsf_qtcb));
goto forget_log;
}
- if ((size_t) (qtcb->header.log_start + qtcb->header.log_length)
- > sizeof(struct fsf_qtcb)) {
+ if (unlikely((size_t) (qtcb->header.log_start +
+ qtcb->header.log_length) >
+ sizeof(struct fsf_qtcb))) {
ZFCP_LOG_NORMAL("bug: ULP (FSF logging) log data ends "
"beyond end of packet header. Ignored. "
"(start=%i, length=%i, size=%li)\n",
diff --git a/drivers/scsi/BusLogic.c b/drivers/scsi/BusLogic.c
index e874b894487..96f4cab0761 100644
--- a/drivers/scsi/BusLogic.c
+++ b/drivers/scsi/BusLogic.c
@@ -579,17 +579,17 @@ static void __init BusLogic_InitializeProbeInfoListISA(struct BusLogic_HostAdapt
/*
Append the list of standard BusLogic MultiMaster ISA I/O Addresses.
*/
- if (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe330 : check_region(0x330, BusLogic_MultiMasterAddressCount) == 0)
+ if (!BusLogic_ProbeOptions.LimitedProbeISA || BusLogic_ProbeOptions.Probe330)
BusLogic_AppendProbeAddressISA(0x330);
- if (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe334 : check_region(0x334, BusLogic_MultiMasterAddressCount) == 0)
+ if (!BusLogic_ProbeOptions.LimitedProbeISA || BusLogic_ProbeOptions.Probe334)
BusLogic_AppendProbeAddressISA(0x334);
- if (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe230 : check_region(0x230, BusLogic_MultiMasterAddressCount) == 0)
+ if (!BusLogic_ProbeOptions.LimitedProbeISA || BusLogic_ProbeOptions.Probe230)
BusLogic_AppendProbeAddressISA(0x230);
- if (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe234 : check_region(0x234, BusLogic_MultiMasterAddressCount) == 0)
+ if (!BusLogic_ProbeOptions.LimitedProbeISA || BusLogic_ProbeOptions.Probe234)
BusLogic_AppendProbeAddressISA(0x234);
- if (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe130 : check_region(0x130, BusLogic_MultiMasterAddressCount) == 0)
+ if (!BusLogic_ProbeOptions.LimitedProbeISA || BusLogic_ProbeOptions.Probe130)
BusLogic_AppendProbeAddressISA(0x130);
- if (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe134 : check_region(0x134, BusLogic_MultiMasterAddressCount) == 0)
+ if (!BusLogic_ProbeOptions.LimitedProbeISA || BusLogic_ProbeOptions.Probe134)
BusLogic_AppendProbeAddressISA(0x134);
}
@@ -795,7 +795,9 @@ static int __init BusLogic_InitializeMultiMasterProbeInfo(struct BusLogic_HostAd
host adapters are probed.
*/
if (!BusLogic_ProbeOptions.NoProbeISA)
- if (PrimaryProbeInfo->IO_Address == 0 && (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe330 : check_region(0x330, BusLogic_MultiMasterAddressCount) == 0)) {
+ if (PrimaryProbeInfo->IO_Address == 0 &&
+ (!BusLogic_ProbeOptions.LimitedProbeISA ||
+ BusLogic_ProbeOptions.Probe330)) {
PrimaryProbeInfo->HostAdapterType = BusLogic_MultiMaster;
PrimaryProbeInfo->HostAdapterBusType = BusLogic_ISA_Bus;
PrimaryProbeInfo->IO_Address = 0x330;
@@ -805,15 +807,25 @@ static int __init BusLogic_InitializeMultiMasterProbeInfo(struct BusLogic_HostAd
omitting the Primary I/O Address which has already been handled.
*/
if (!BusLogic_ProbeOptions.NoProbeISA) {
- if (!StandardAddressSeen[1] && (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe334 : check_region(0x334, BusLogic_MultiMasterAddressCount) == 0))
+ if (!StandardAddressSeen[1] &&
+ (!BusLogic_ProbeOptions.LimitedProbeISA ||
+ BusLogic_ProbeOptions.Probe334))
BusLogic_AppendProbeAddressISA(0x334);
- if (!StandardAddressSeen[2] && (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe230 : check_region(0x230, BusLogic_MultiMasterAddressCount) == 0))
+ if (!StandardAddressSeen[2] &&
+ (!BusLogic_ProbeOptions.LimitedProbeISA ||
+ BusLogic_ProbeOptions.Probe230))
BusLogic_AppendProbeAddressISA(0x230);
- if (!StandardAddressSeen[3] && (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe234 : check_region(0x234, BusLogic_MultiMasterAddressCount) == 0))
+ if (!StandardAddressSeen[3] &&
+ (!BusLogic_ProbeOptions.LimitedProbeISA ||
+ BusLogic_ProbeOptions.Probe234))
BusLogic_AppendProbeAddressISA(0x234);
- if (!StandardAddressSeen[4] && (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe130 : check_region(0x130, BusLogic_MultiMasterAddressCount) == 0))
+ if (!StandardAddressSeen[4] &&
+ (!BusLogic_ProbeOptions.LimitedProbeISA ||
+ BusLogic_ProbeOptions.Probe130))
BusLogic_AppendProbeAddressISA(0x130);
- if (!StandardAddressSeen[5] && (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe134 : check_region(0x134, BusLogic_MultiMasterAddressCount) == 0))
+ if (!StandardAddressSeen[5] &&
+ (!BusLogic_ProbeOptions.LimitedProbeISA ||
+ BusLogic_ProbeOptions.Probe134))
BusLogic_AppendProbeAddressISA(0x134);
}
/*
@@ -2220,22 +2232,35 @@ static int __init BusLogic_init(void)
HostAdapter->PCI_Device = ProbeInfo->PCI_Device;
HostAdapter->IRQ_Channel = ProbeInfo->IRQ_Channel;
HostAdapter->AddressCount = BusLogic_HostAdapterAddressCount[HostAdapter->HostAdapterType];
+
+ /*
+ Make sure region is free prior to probing.
+ */
+ if (!request_region(HostAdapter->IO_Address, HostAdapter->AddressCount,
+ "BusLogic"))
+ continue;
/*
Probe the Host Adapter. If unsuccessful, abort further initialization.
*/
- if (!BusLogic_ProbeHostAdapter(HostAdapter))
+ if (!BusLogic_ProbeHostAdapter(HostAdapter)) {
+ release_region(HostAdapter->IO_Address, HostAdapter->AddressCount);
continue;
+ }
/*
Hard Reset the Host Adapter. If unsuccessful, abort further
initialization.
*/
- if (!BusLogic_HardwareResetHostAdapter(HostAdapter, true))
+ if (!BusLogic_HardwareResetHostAdapter(HostAdapter, true)) {
+ release_region(HostAdapter->IO_Address, HostAdapter->AddressCount);
continue;
+ }
/*
Check the Host Adapter. If unsuccessful, abort further initialization.
*/
- if (!BusLogic_CheckHostAdapter(HostAdapter))
+ if (!BusLogic_CheckHostAdapter(HostAdapter)) {
+ release_region(HostAdapter->IO_Address, HostAdapter->AddressCount);
continue;
+ }
/*
Initialize the Driver Options field if provided.
*/
@@ -2247,16 +2272,6 @@ static int __init BusLogic_init(void)
*/
BusLogic_AnnounceDriver(HostAdapter);
/*
- Register usage of the I/O Address range. From this point onward, any
- failure will be assumed to be due to a problem with the Host Adapter,
- rather than due to having mistakenly identified this port as belonging
- to a BusLogic Host Adapter. The I/O Address range will not be
- released, thereby preventing it from being incorrectly identified as
- any other type of Host Adapter.
- */
- if (!request_region(HostAdapter->IO_Address, HostAdapter->AddressCount, "BusLogic"))
- continue;
- /*
Register the SCSI Host structure.
*/
@@ -2280,6 +2295,12 @@ static int __init BusLogic_init(void)
Acquire the System Resources necessary to use the Host Adapter, then
Create the Initial CCBs, Initialize the Host Adapter, and finally
perform Target Device Inquiry.
+
+ From this point onward, any failure will be assumed to be due to a
+ problem with the Host Adapter, rather than due to having mistakenly
+ identified this port as belonging to a BusLogic Host Adapter. The
+ I/O Address range will not be released, thereby preventing it from
+ being incorrectly identified as any other type of Host Adapter.
*/
if (BusLogic_ReadHostAdapterConfiguration(HostAdapter) &&
BusLogic_ReportHostAdapterConfiguration(HostAdapter) &&
@@ -3598,6 +3619,7 @@ static void __exit BusLogic_exit(void)
__setup("BusLogic=", BusLogic_Setup);
+#ifdef MODULE
static struct pci_device_id BusLogic_pci_tbl[] __devinitdata = {
{ PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
@@ -3607,6 +3629,7 @@ static struct pci_device_id BusLogic_pci_tbl[] __devinitdata = {
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ }
};
+#endif
MODULE_DEVICE_TABLE(pci, BusLogic_pci_tbl);
module_init(BusLogic_init);
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index e1ebed0f075..58c811d20eb 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -241,6 +241,12 @@ config SCSI_SCAN_ASYNC
You can override this choice by specifying "scsi_mod.scan=sync"
or async on the kernel's command line.
+config SCSI_WAIT_SCAN
+ tristate
+ default m
+ depends on SCSI
+ depends on MODULES
+
menu "SCSI Transports"
depends on SCSI
@@ -1194,17 +1200,6 @@ config SCSI_NCR53C8XX_SYNC
There is no safe option other than using good cabling, right
terminations and SCSI conformant devices.
-config SCSI_NCR53C8XX_PROFILE
- bool "enable profiling"
- depends on SCSI_ZALON || SCSI_NCR_Q720
- help
- This option allows you to enable profiling information gathering.
- These statistics are not very accurate due to the low frequency
- of the kernel clock (100 Hz on i386) and have performance impact
- on systems that use very fast devices.
-
- The normal answer therefore is N.
-
config SCSI_NCR53C8XX_NO_DISCONNECT
bool "not allow targets to disconnect"
depends on (SCSI_ZALON || SCSI_NCR_Q720) && SCSI_NCR53C8XX_DEFAULT_TAGS=0
@@ -1334,11 +1329,6 @@ config SCSI_SIM710
It currently supports Compaq EISA cards and NCR MCA cards
-config 53C700_IO_MAPPED
- bool
- depends on SCSI_SIM710
- default y
-
config SCSI_SYM53C416
tristate "Symbios 53c416 SCSI support"
depends on ISA && SCSI
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index 70cff4c599d..51e884fa10b 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -146,7 +146,7 @@ obj-$(CONFIG_CHR_DEV_SCH) += ch.o
# This goes last, so that "real" scsi devices probe earlier
obj-$(CONFIG_SCSI_DEBUG) += scsi_debug.o
-obj-$(CONFIG_SCSI) += scsi_wait_scan.o
+obj-$(CONFIG_SCSI_WAIT_SCAN) += scsi_wait_scan.o
scsi_mod-y += scsi.o hosts.o scsi_ioctl.o constants.o \
scsicam.o scsi_error.o scsi_lib.o \
diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
index d789e61bdc4..1e82c69b36b 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -5,7 +5,7 @@
* based on the old aacraid driver that is..
* Adaptec aacraid device driver for Linux.
*
- * Copyright (c) 2000 Adaptec, Inc. (aacraid@adaptec.com)
+ * Copyright (c) 2000-2007 Adaptec, Inc. (aacraid@adaptec.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -172,6 +172,30 @@ MODULE_PARM_DESC(acbsize, "Request a specific adapter control block (FIB) size.
int expose_physicals = -1;
module_param(expose_physicals, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(expose_physicals, "Expose physical components of the arrays. -1=protect 0=off, 1=on");
+
+
+static inline int aac_valid_context(struct scsi_cmnd *scsicmd,
+ struct fib *fibptr) {
+ struct scsi_device *device;
+
+ if (unlikely(!scsicmd || !scsicmd->scsi_done )) {
+ dprintk((KERN_WARNING "aac_valid_context: scsi command corrupt\n"))
+;
+ aac_fib_complete(fibptr);
+ aac_fib_free(fibptr);
+ return 0;
+ }
+ scsicmd->SCp.phase = AAC_OWNER_MIDLEVEL;
+ device = scsicmd->device;
+ if (unlikely(!device || !scsi_device_online(device))) {
+ dprintk((KERN_WARNING "aac_valid_context: scsi device corrupt\n"));
+ aac_fib_complete(fibptr);
+ aac_fib_free(fibptr);
+ return 0;
+ }
+ return 1;
+}
+
/**
* aac_get_config_status - check the adapter configuration
* @common: adapter to query
@@ -258,13 +282,10 @@ int aac_get_containers(struct aac_dev *dev)
u32 index;
int status = 0;
struct fib * fibptr;
- unsigned instance;
struct aac_get_container_count *dinfo;
struct aac_get_container_count_resp *dresp;
int maximum_num_containers = MAXIMUM_NUM_CONTAINERS;
- instance = dev->scsi_host_ptr->unique_id;
-
if (!(fibptr = aac_fib_alloc(dev)))
return -ENOMEM;
@@ -284,88 +305,35 @@ int aac_get_containers(struct aac_dev *dev)
maximum_num_containers = le32_to_cpu(dresp->ContainerSwitchEntries);
aac_fib_complete(fibptr);
}
+ aac_fib_free(fibptr);
if (maximum_num_containers < MAXIMUM_NUM_CONTAINERS)
maximum_num_containers = MAXIMUM_NUM_CONTAINERS;
- fsa_dev_ptr = kmalloc(
- sizeof(*fsa_dev_ptr) * maximum_num_containers, GFP_KERNEL);
- if (!fsa_dev_ptr) {
- aac_fib_free(fibptr);
+ fsa_dev_ptr = kmalloc(sizeof(*fsa_dev_ptr) * maximum_num_containers,
+ GFP_KERNEL);
+ if (!fsa_dev_ptr)
return -ENOMEM;
- }
memset(fsa_dev_ptr, 0, sizeof(*fsa_dev_ptr) * maximum_num_containers);
dev->fsa_dev = fsa_dev_ptr;
dev->maximum_num_containers = maximum_num_containers;
- for (index = 0; index < dev->maximum_num_containers; index++) {
- struct aac_query_mount *dinfo;
- struct aac_mount *dresp;
-
+ for (index = 0; index < dev->maximum_num_containers; ) {
fsa_dev_ptr[index].devname[0] = '\0';
- aac_fib_init(fibptr);
- dinfo = (struct aac_query_mount *) fib_data(fibptr);
-
- dinfo->command = cpu_to_le32(VM_NameServe);
- dinfo->count = cpu_to_le32(index);
- dinfo->type = cpu_to_le32(FT_FILESYS);
+ status = aac_probe_container(dev, index);
- status = aac_fib_send(ContainerCommand,
- fibptr,
- sizeof (struct aac_query_mount),
- FsaNormal,
- 1, 1,
- NULL, NULL);
- if (status < 0 ) {
+ if (status < 0) {
printk(KERN_WARNING "aac_get_containers: SendFIB failed.\n");
break;
}
- dresp = (struct aac_mount *)fib_data(fibptr);
- if ((le32_to_cpu(dresp->status) == ST_OK) &&
- (le32_to_cpu(dresp->mnt[0].vol) == CT_NONE)) {
- dinfo->command = cpu_to_le32(VM_NameServe64);
- dinfo->count = cpu_to_le32(index);
- dinfo->type = cpu_to_le32(FT_FILESYS);
-
- if (aac_fib_send(ContainerCommand,
- fibptr,
- sizeof(struct aac_query_mount),
- FsaNormal,
- 1, 1,
- NULL, NULL) < 0)
- continue;
- } else
- dresp->mnt[0].capacityhigh = 0;
-
- dprintk ((KERN_DEBUG
- "VM_NameServe cid=%d status=%d vol=%d state=%d cap=%llu\n",
- (int)index, (int)le32_to_cpu(dresp->status),
- (int)le32_to_cpu(dresp->mnt[0].vol),
- (int)le32_to_cpu(dresp->mnt[0].state),
- ((u64)le32_to_cpu(dresp->mnt[0].capacity)) +
- (((u64)le32_to_cpu(dresp->mnt[0].capacityhigh)) << 32)));
- if ((le32_to_cpu(dresp->status) == ST_OK) &&
- (le32_to_cpu(dresp->mnt[0].vol) != CT_NONE) &&
- (le32_to_cpu(dresp->mnt[0].state) != FSCS_HIDDEN)) {
- fsa_dev_ptr[index].valid = 1;
- fsa_dev_ptr[index].type = le32_to_cpu(dresp->mnt[0].vol);
- fsa_dev_ptr[index].size
- = ((u64)le32_to_cpu(dresp->mnt[0].capacity)) +
- (((u64)le32_to_cpu(dresp->mnt[0].capacityhigh)) << 32);
- if (le32_to_cpu(dresp->mnt[0].state) & FSCS_READONLY)
- fsa_dev_ptr[index].ro = 1;
- }
- aac_fib_complete(fibptr);
/*
* If there are no more containers, then stop asking.
*/
- if ((index + 1) >= le32_to_cpu(dresp->count)){
+ if (++index >= status)
break;
- }
}
- aac_fib_free(fibptr);
return status;
}
@@ -382,8 +350,9 @@ static void aac_internal_transfer(struct scsi_cmnd *scsicmd, void *data, unsigne
buf = scsicmd->request_buffer;
transfer_len = min(scsicmd->request_bufflen, len + offset);
}
-
- memcpy(buf + offset, data, transfer_len - offset);
+ transfer_len -= offset;
+ if (buf && transfer_len)
+ memcpy(buf + offset, data, transfer_len);
if (scsicmd->use_sg)
kunmap_atomic(buf - sg->offset, KM_IRQ0);
@@ -396,7 +365,9 @@ static void get_container_name_callback(void *context, struct fib * fibptr)
struct scsi_cmnd * scsicmd;
scsicmd = (struct scsi_cmnd *) context;
- scsicmd->SCp.phase = AAC_OWNER_MIDLEVEL;
+
+ if (!aac_valid_context(scsicmd, fibptr))
+ return;
dprintk((KERN_DEBUG "get_container_name_callback[cpu %d]: t = %ld.\n", smp_processor_id(), jiffies));
BUG_ON(fibptr == NULL);
@@ -431,7 +402,7 @@ static void get_container_name_callback(void *context, struct fib * fibptr)
/**
* aac_get_container_name - get container name, none blocking.
*/
-static int aac_get_container_name(struct scsi_cmnd * scsicmd, int cid)
+static int aac_get_container_name(struct scsi_cmnd * scsicmd)
{
int status;
struct aac_get_name *dinfo;
@@ -448,7 +419,7 @@ static int aac_get_container_name(struct scsi_cmnd * scsicmd, int cid)
dinfo->command = cpu_to_le32(VM_ContainerConfig);
dinfo->type = cpu_to_le32(CT_READ_NAME);
- dinfo->cid = cpu_to_le32(cid);
+ dinfo->cid = cpu_to_le32(scmd_id(scsicmd));
dinfo->count = cpu_to_le32(sizeof(((struct aac_get_name_resp *)NULL)->data));
status = aac_fib_send(ContainerCommand,
@@ -473,85 +444,192 @@ static int aac_get_container_name(struct scsi_cmnd * scsicmd, int cid)
return -1;
}
-/**
- * aac_probe_container - query a logical volume
- * @dev: device to query
- * @cid: container identifier
- *
- * Queries the controller about the given volume. The volume information
- * is updated in the struct fsa_dev_info structure rather than returned.
- */
-
-int aac_probe_container(struct aac_dev *dev, int cid)
+static int aac_probe_container_callback2(struct scsi_cmnd * scsicmd)
+{
+ struct fsa_dev_info *fsa_dev_ptr = ((struct aac_dev *)(scsicmd->device->host->hostdata))->fsa_dev;
+
+ if (fsa_dev_ptr[scmd_id(scsicmd)].valid)
+ return aac_scsi_cmd(scsicmd);
+
+ scsicmd->result = DID_NO_CONNECT << 16;
+ scsicmd->scsi_done(scsicmd);
+ return 0;
+}
+
+static int _aac_probe_container2(void * context, struct fib * fibptr)
{
struct fsa_dev_info *fsa_dev_ptr;
- int status;
+ int (*callback)(struct scsi_cmnd *);
+ struct scsi_cmnd * scsicmd = (struct scsi_cmnd *)context;
+
+ if (!aac_valid_context(scsicmd, fibptr))
+ return 0;
+
+ fsa_dev_ptr = ((struct aac_dev *)(scsicmd->device->host->hostdata))->fsa_dev;
+
+ scsicmd->SCp.Status = 0;
+ if (fsa_dev_ptr) {
+ struct aac_mount * dresp = (struct aac_mount *) fib_data(fibptr);
+ fsa_dev_ptr += scmd_id(scsicmd);
+
+ if ((le32_to_cpu(dresp->status) == ST_OK) &&
+ (le32_to_cpu(dresp->mnt[0].vol) != CT_NONE) &&
+ (le32_to_cpu(dresp->mnt[0].state) != FSCS_HIDDEN)) {
+ fsa_dev_ptr->valid = 1;
+ fsa_dev_ptr->type = le32_to_cpu(dresp->mnt[0].vol);
+ fsa_dev_ptr->size
+ = ((u64)le32_to_cpu(dresp->mnt[0].capacity)) +
+ (((u64)le32_to_cpu(dresp->mnt[0].capacityhigh)) << 32);
+ fsa_dev_ptr->ro = ((le32_to_cpu(dresp->mnt[0].state) & FSCS_READONLY) != 0);
+ }
+ if ((fsa_dev_ptr->valid & 1) == 0)
+ fsa_dev_ptr->valid = 0;
+ scsicmd->SCp.Status = le32_to_cpu(dresp->count);
+ }
+ aac_fib_complete(fibptr);
+ aac_fib_free(fibptr);
+ callback = (int (*)(struct scsi_cmnd *))(scsicmd->SCp.ptr);
+ scsicmd->SCp.ptr = NULL;
+ return (*callback)(scsicmd);
+}
+
+static int _aac_probe_container1(void * context, struct fib * fibptr)
+{
+ struct scsi_cmnd * scsicmd;
+ struct aac_mount * dresp;
struct aac_query_mount *dinfo;
- struct aac_mount *dresp;
- struct fib * fibptr;
- unsigned instance;
+ int status;
- fsa_dev_ptr = dev->fsa_dev;
- if (!fsa_dev_ptr)
- return -ENOMEM;
- instance = dev->scsi_host_ptr->unique_id;
+ dresp = (struct aac_mount *) fib_data(fibptr);
+ dresp->mnt[0].capacityhigh = 0;
+ if ((le32_to_cpu(dresp->status) != ST_OK) ||
+ (le32_to_cpu(dresp->mnt[0].vol) != CT_NONE))
+ return _aac_probe_container2(context, fibptr);
+ scsicmd = (struct scsi_cmnd *) context;
+ scsicmd->SCp.phase = AAC_OWNER_MIDLEVEL;
- if (!(fibptr = aac_fib_alloc(dev)))
- return -ENOMEM;
+ if (!aac_valid_context(scsicmd, fibptr))
+ return 0;
aac_fib_init(fibptr);
dinfo = (struct aac_query_mount *)fib_data(fibptr);
- dinfo->command = cpu_to_le32(VM_NameServe);
- dinfo->count = cpu_to_le32(cid);
+ dinfo->command = cpu_to_le32(VM_NameServe64);
+ dinfo->count = cpu_to_le32(scmd_id(scsicmd));
dinfo->type = cpu_to_le32(FT_FILESYS);
status = aac_fib_send(ContainerCommand,
- fibptr,
- sizeof(struct aac_query_mount),
- FsaNormal,
- 1, 1,
- NULL, NULL);
+ fibptr,
+ sizeof(struct aac_query_mount),
+ FsaNormal,
+ 0, 1,
+ (fib_callback) _aac_probe_container2,
+ (void *) scsicmd);
+ /*
+ * Check that the command queued to the controller
+ */
+ if (status == -EINPROGRESS) {
+ scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
+ return 0;
+ }
if (status < 0) {
- printk(KERN_WARNING "aacraid: aac_probe_container query failed.\n");
- goto error;
+ /* Inherit results from VM_NameServe, if any */
+ dresp->status = cpu_to_le32(ST_OK);
+ return _aac_probe_container2(context, fibptr);
}
+ return 0;
+}
- dresp = (struct aac_mount *) fib_data(fibptr);
+static int _aac_probe_container(struct scsi_cmnd * scsicmd, int (*callback)(struct scsi_cmnd *))
+{
+ struct fib * fibptr;
+ int status = -ENOMEM;
- if ((le32_to_cpu(dresp->status) == ST_OK) &&
- (le32_to_cpu(dresp->mnt[0].vol) == CT_NONE)) {
- dinfo->command = cpu_to_le32(VM_NameServe64);
- dinfo->count = cpu_to_le32(cid);
- dinfo->type = cpu_to_le32(FT_FILESYS);
+ if ((fibptr = aac_fib_alloc((struct aac_dev *)scsicmd->device->host->hostdata))) {
+ struct aac_query_mount *dinfo;
- if (aac_fib_send(ContainerCommand,
- fibptr,
- sizeof(struct aac_query_mount),
- FsaNormal,
- 1, 1,
- NULL, NULL) < 0)
- goto error;
- } else
- dresp->mnt[0].capacityhigh = 0;
+ aac_fib_init(fibptr);
+
+ dinfo = (struct aac_query_mount *)fib_data(fibptr);
+
+ dinfo->command = cpu_to_le32(VM_NameServe);
+ dinfo->count = cpu_to_le32(scmd_id(scsicmd));
+ dinfo->type = cpu_to_le32(FT_FILESYS);
+ scsicmd->SCp.ptr = (char *)callback;
- if ((le32_to_cpu(dresp->status) == ST_OK) &&
- (le32_to_cpu(dresp->mnt[0].vol) != CT_NONE) &&
- (le32_to_cpu(dresp->mnt[0].state) != FSCS_HIDDEN)) {
- fsa_dev_ptr[cid].valid = 1;
- fsa_dev_ptr[cid].type = le32_to_cpu(dresp->mnt[0].vol);
- fsa_dev_ptr[cid].size
- = ((u64)le32_to_cpu(dresp->mnt[0].capacity)) +
- (((u64)le32_to_cpu(dresp->mnt[0].capacityhigh)) << 32);
- if (le32_to_cpu(dresp->mnt[0].state) & FSCS_READONLY)
- fsa_dev_ptr[cid].ro = 1;
+ status = aac_fib_send(ContainerCommand,
+ fibptr,
+ sizeof(struct aac_query_mount),
+ FsaNormal,
+ 0, 1,
+ (fib_callback) _aac_probe_container1,
+ (void *) scsicmd);
+ /*
+ * Check that the command queued to the controller
+ */
+ if (status == -EINPROGRESS) {
+ scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
+ return 0;
+ }
+ if (status < 0) {
+ scsicmd->SCp.ptr = NULL;
+ aac_fib_complete(fibptr);
+ aac_fib_free(fibptr);
+ }
}
+ if (status < 0) {
+ struct fsa_dev_info *fsa_dev_ptr = ((struct aac_dev *)(scsicmd->device->host->hostdata))->fsa_dev;
+ if (fsa_dev_ptr) {
+ fsa_dev_ptr += scmd_id(scsicmd);
+ if ((fsa_dev_ptr->valid & 1) == 0) {
+ fsa_dev_ptr->valid = 0;
+ return (*callback)(scsicmd);
+ }
+ }
+ }
+ return status;
+}
-error:
- aac_fib_complete(fibptr);
- aac_fib_free(fibptr);
+/**
+ * aac_probe_container - query a logical volume
+ * @dev: device to query
+ * @cid: container identifier
+ *
+ * Queries the controller about the given volume. The volume information
+ * is updated in the struct fsa_dev_info structure rather than returned.
+ */
+static int aac_probe_container_callback1(struct scsi_cmnd * scsicmd)
+{
+ scsicmd->device = NULL;
+ return 0;
+}
+
+int aac_probe_container(struct aac_dev *dev, int cid)
+{
+ struct scsi_cmnd *scsicmd = kmalloc(sizeof(*scsicmd), GFP_KERNEL);
+ struct scsi_device *scsidev = kmalloc(sizeof(*scsidev), GFP_KERNEL);
+ int status;
+ if (!scsicmd || !scsidev) {
+ kfree(scsicmd);
+ kfree(scsidev);
+ return -ENOMEM;
+ }
+ scsicmd->list.next = NULL;
+ scsicmd->scsi_done = (void (*)(struct scsi_cmnd*))_aac_probe_container1;
+
+ scsicmd->device = scsidev;
+ scsidev->sdev_state = 0;
+ scsidev->id = cid;
+ scsidev->host = dev->scsi_host_ptr;
+
+ if (_aac_probe_container(scsicmd, aac_probe_container_callback1) == 0)
+ while (scsicmd->device == scsidev)
+ schedule();
+ kfree(scsidev);
+ status = scsicmd->SCp.Status;
+ kfree(scsicmd);
return status;
}
@@ -1115,6 +1193,12 @@ int aac_get_adapter_info(struct aac_dev* dev)
printk(KERN_INFO "%s%d: serial %x\n",
dev->name, dev->id,
le32_to_cpu(dev->adapter_info.serial[0]));
+ if (dev->supplement_adapter_info.VpdInfo.Tsid[0]) {
+ printk(KERN_INFO "%s%d: TSID %.*s\n",
+ dev->name, dev->id,
+ (int)sizeof(dev->supplement_adapter_info.VpdInfo.Tsid),
+ dev->supplement_adapter_info.VpdInfo.Tsid);
+ }
}
dev->nondasd_support = 0;
@@ -1241,7 +1325,9 @@ static void io_callback(void *context, struct fib * fibptr)
u32 cid;
scsicmd = (struct scsi_cmnd *) context;
- scsicmd->SCp.phase = AAC_OWNER_MIDLEVEL;
+
+ if (!aac_valid_context(scsicmd, fibptr))
+ return;
dev = (struct aac_dev *)scsicmd->device->host->hostdata;
cid = scmd_id(scsicmd);
@@ -1317,7 +1403,7 @@ static void io_callback(void *context, struct fib * fibptr)
scsicmd->scsi_done(scsicmd);
}
-static int aac_read(struct scsi_cmnd * scsicmd, int cid)
+static int aac_read(struct scsi_cmnd * scsicmd)
{
u64 lba;
u32 count;
@@ -1331,7 +1417,7 @@ static int aac_read(struct scsi_cmnd * scsicmd, int cid)
*/
switch (scsicmd->cmnd[0]) {
case READ_6:
- dprintk((KERN_DEBUG "aachba: received a read(6) command on id %d.\n", cid));
+ dprintk((KERN_DEBUG "aachba: received a read(6) command on id %d.\n", scmd_id(scsicmd)));
lba = ((scsicmd->cmnd[1] & 0x1F) << 16) |
(scsicmd->cmnd[2] << 8) | scsicmd->cmnd[3];
@@ -1341,7 +1427,7 @@ static int aac_read(struct scsi_cmnd * scsicmd, int cid)
count = 256;
break;
case READ_16:
- dprintk((KERN_DEBUG "aachba: received a read(16) command on id %d.\n", cid));
+ dprintk((KERN_DEBUG "aachba: received a read(16) command on id %d.\n", scmd_id(scsicmd)));
lba = ((u64)scsicmd->cmnd[2] << 56) |
((u64)scsicmd->cmnd[3] << 48) |
@@ -1355,7 +1441,7 @@ static int aac_read(struct scsi_cmnd * scsicmd, int cid)
(scsicmd->cmnd[12] << 8) | scsicmd->cmnd[13];
break;
case READ_12:
- dprintk((KERN_DEBUG "aachba: received a read(12) command on id %d.\n", cid));
+ dprintk((KERN_DEBUG "aachba: received a read(12) command on id %d.\n", scmd_id(scsicmd)));
lba = ((u64)scsicmd->cmnd[2] << 24) |
(scsicmd->cmnd[3] << 16) |
@@ -1365,7 +1451,7 @@ static int aac_read(struct scsi_cmnd * scsicmd, int cid)
(scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9];
break;
default:
- dprintk((KERN_DEBUG "aachba: received a read(10) command on id %d.\n", cid));
+ dprintk((KERN_DEBUG "aachba: received a read(10) command on id %d.\n", scmd_id(scsicmd)));
lba = ((u64)scsicmd->cmnd[2] << 24) |
(scsicmd->cmnd[3] << 16) |
@@ -1405,7 +1491,7 @@ static int aac_read(struct scsi_cmnd * scsicmd, int cid)
return 0;
}
-static int aac_write(struct scsi_cmnd * scsicmd, int cid)
+static int aac_write(struct scsi_cmnd * scsicmd)
{
u64 lba;
u32 count;
@@ -1424,7 +1510,7 @@ static int aac_write(struct scsi_cmnd * scsicmd, int cid)
if (count == 0)
count = 256;
} else if (scsicmd->cmnd[0] == WRITE_16) { /* 16 byte command */
- dprintk((KERN_DEBUG "aachba: received a write(16) command on id %d.\n", cid));
+ dprintk((KERN_DEBUG "aachba: received a write(16) command on id %d.\n", scmd_id(scsicmd)));
lba = ((u64)scsicmd->cmnd[2] << 56) |
((u64)scsicmd->cmnd[3] << 48) |
@@ -1436,14 +1522,14 @@ static int aac_write(struct scsi_cmnd * scsicmd, int cid)
count = (scsicmd->cmnd[10] << 24) | (scsicmd->cmnd[11] << 16) |
(scsicmd->cmnd[12] << 8) | scsicmd->cmnd[13];
} else if (scsicmd->cmnd[0] == WRITE_12) { /* 12 byte command */
- dprintk((KERN_DEBUG "aachba: received a write(12) command on id %d.\n", cid));
+ dprintk((KERN_DEBUG "aachba: received a write(12) command on id %d.\n", scmd_id(scsicmd)));
lba = ((u64)scsicmd->cmnd[2] << 24) | (scsicmd->cmnd[3] << 16)
| (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5];
count = (scsicmd->cmnd[6] << 24) | (scsicmd->cmnd[7] << 16)
| (scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9];
} else {
- dprintk((KERN_DEBUG "aachba: received a write(10) command on id %d.\n", cid));
+ dprintk((KERN_DEBUG "aachba: received a write(10) command on id %d.\n", scmd_id(scsicmd)));
lba = ((u64)scsicmd->cmnd[2] << 24) | (scsicmd->cmnd[3] << 16) | (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5];
count = (scsicmd->cmnd[7] << 8) | scsicmd->cmnd[8];
}
@@ -1488,7 +1574,9 @@ static void synchronize_callback(void *context, struct fib *fibptr)
struct scsi_cmnd *cmd;
cmd = context;
- cmd->SCp.phase = AAC_OWNER_MIDLEVEL;
+
+ if (!aac_valid_context(cmd, fibptr))
+ return;
dprintk((KERN_DEBUG "synchronize_callback[cpu %d]: t = %ld.\n",
smp_processor_id(), jiffies));
@@ -1523,7 +1611,7 @@ static void synchronize_callback(void *context, struct fib *fibptr)
cmd->scsi_done(cmd);
}
-static int aac_synchronize(struct scsi_cmnd *scsicmd, int cid)
+static int aac_synchronize(struct scsi_cmnd *scsicmd)
{
int status;
struct fib *cmd_fibcontext;
@@ -1568,7 +1656,7 @@ static int aac_synchronize(struct scsi_cmnd *scsicmd, int cid)
synchronizecmd = fib_data(cmd_fibcontext);
synchronizecmd->command = cpu_to_le32(VM_ContainerConfig);
synchronizecmd->type = cpu_to_le32(CT_FLUSH_CACHE);
- synchronizecmd->cid = cpu_to_le32(cid);
+ synchronizecmd->cid = cpu_to_le32(scmd_id(scsicmd));
synchronizecmd->count =
cpu_to_le32(sizeof(((struct aac_synchronize_reply *)NULL)->data));
@@ -1646,29 +1734,12 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd)
case TEST_UNIT_READY:
if (dev->in_reset)
return -1;
- spin_unlock_irq(host->host_lock);
- aac_probe_container(dev, cid);
- if ((fsa_dev_ptr[cid].valid & 1) == 0)
- fsa_dev_ptr[cid].valid = 0;
- spin_lock_irq(host->host_lock);
- if (fsa_dev_ptr[cid].valid == 0) {
- scsicmd->result = DID_NO_CONNECT << 16;
- scsicmd->scsi_done(scsicmd);
- return 0;
- }
+ return _aac_probe_container(scsicmd,
+ aac_probe_container_callback2);
default:
break;
}
}
- /*
- * If the target container still doesn't exist,
- * return failure
- */
- if (fsa_dev_ptr[cid].valid == 0) {
- scsicmd->result = DID_BAD_TARGET << 16;
- scsicmd->scsi_done(scsicmd);
- return 0;
- }
} else { /* check for physical non-dasd devices */
if ((dev->nondasd_support == 1) || expose_physicals) {
if (dev->in_reset)
@@ -1733,7 +1804,7 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd)
setinqstr(dev, (void *) (inq_data.inqd_vid), fsa_dev_ptr[cid].type);
inq_data.inqd_pdt = INQD_PDT_DA; /* Direct/random access device */
aac_internal_transfer(scsicmd, &inq_data, 0, sizeof(inq_data));
- return aac_get_container_name(scsicmd, cid);
+ return aac_get_container_name(scsicmd);
}
case SERVICE_ACTION_IN:
if (!(dev->raw_io_interface) ||
@@ -1899,7 +1970,7 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd)
min(sizeof(fsa_dev_ptr[cid].devname),
sizeof(scsicmd->request->rq_disk->disk_name) + 1));
- return aac_read(scsicmd, cid);
+ return aac_read(scsicmd);
case WRITE_6:
case WRITE_10:
@@ -1907,11 +1978,11 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd)
case WRITE_16:
if (dev->in_reset)
return -1;
- return aac_write(scsicmd, cid);
+ return aac_write(scsicmd);
case SYNCHRONIZE_CACHE:
/* Issue FIB to tell Firmware to flush it's cache */
- return aac_synchronize(scsicmd, cid);
+ return aac_synchronize(scsicmd);
default:
/*
@@ -2058,7 +2129,10 @@ static void aac_srb_callback(void *context, struct fib * fibptr)
struct scsi_cmnd *scsicmd;
scsicmd = (struct scsi_cmnd *) context;
- scsicmd->SCp.phase = AAC_OWNER_MIDLEVEL;
+
+ if (!aac_valid_context(scsicmd, fibptr))
+ return;
+
dev = (struct aac_dev *)scsicmd->device->host->hostdata;
BUG_ON(fibptr == NULL);
diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index 39ecd0d22eb..45ca3e80161 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -12,8 +12,8 @@
*----------------------------------------------------------------------------*/
#ifndef AAC_DRIVER_BUILD
-# define AAC_DRIVER_BUILD 2423
-# define AAC_DRIVER_BRANCH "-mh3"
+# define AAC_DRIVER_BUILD 2437
+# define AAC_DRIVER_BRANCH "-mh4"
#endif
#define MAXIMUM_NUM_CONTAINERS 32
@@ -48,49 +48,13 @@ struct diskparm
/*
- * DON'T CHANGE THE ORDER, this is set by the firmware
+ * Firmware constants
*/
#define CT_NONE 0
-#define CT_VOLUME 1
-#define CT_MIRROR 2
-#define CT_STRIPE 3
-#define CT_RAID5 4
-#define CT_SSRW 5
-#define CT_SSRO 6
-#define CT_MORPH 7
-#define CT_PASSTHRU 8
-#define CT_RAID4 9
-#define CT_RAID10 10 /* stripe of mirror */
-#define CT_RAID00 11 /* stripe of stripe */
-#define CT_VOLUME_OF_MIRRORS 12 /* volume of mirror */
-#define CT_PSEUDO_RAID 13 /* really raid4 */
-#define CT_LAST_VOLUME_TYPE 14
#define CT_OK 218
-
-/*
- * Types of objects addressable in some fashion by the client.
- * This is a superset of those objects handled just by the filesystem
- * and includes "raw" objects that an administrator would use to
- * configure containers and filesystems.
- */
-
-#define FT_REG 1 /* regular file */
-#define FT_DIR 2 /* directory */
-#define FT_BLK 3 /* "block" device - reserved */
-#define FT_CHR 4 /* "character special" device - reserved */
-#define FT_LNK 5 /* symbolic link */
-#define FT_SOCK 6 /* socket */
-#define FT_FIFO 7 /* fifo */
#define FT_FILESYS 8 /* ADAPTEC's "FSA"(tm) filesystem */
#define FT_DRIVE 9 /* physical disk - addressable in scsi by bus/id/lun */
-#define FT_SLICE 10 /* virtual disk - raw volume - slice */
-#define FT_PARTITION 11 /* FSA partition - carved out of a slice - building block for containers */
-#define FT_VOLUME 12 /* Container - Volume Set */
-#define FT_STRIPE 13 /* Container - Stripe Set */
-#define FT_MIRROR 14 /* Container - Mirror Set */
-#define FT_RAID5 15 /* Container - Raid 5 Set */
-#define FT_DATABASE 16 /* Storage object with "foreign" content manager */
/*
* Host side memory scatter gather list
@@ -497,6 +461,7 @@ struct adapter_ops
void (*adapter_enable_int)(struct aac_dev *dev);
int (*adapter_sync_cmd)(struct aac_dev *dev, u32 command, u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6, u32 *status, u32 *r1, u32 *r2, u32 *r3, u32 *r4);
int (*adapter_check_health)(struct aac_dev *dev);
+ int (*adapter_restart)(struct aac_dev *dev, int bled);
/* Transport operations */
int (*adapter_ioremap)(struct aac_dev * dev, u32 size);
irqreturn_t (*adapter_intr)(int irq, void *dev_id);
@@ -833,7 +798,7 @@ struct fib {
*/
struct list_head fiblink;
void *data;
- struct hw_fib *hw_fib; /* Actual shared object */
+ struct hw_fib *hw_fib_va; /* Actual shared object */
dma_addr_t hw_fib_pa; /* physical address of hw_fib*/
};
@@ -878,10 +843,25 @@ struct aac_supplement_adapter_info
__le32 Version;
__le32 FeatureBits;
u8 SlotNumber;
- u8 ReservedPad0[0];
+ u8 ReservedPad0[3];
u8 BuildDate[12];
__le32 CurrentNumberPorts;
- __le32 ReservedGrowth[24];
+ struct {
+ u8 AssemblyPn[8];
+ u8 FruPn[8];
+ u8 BatteryFruPn[8];
+ u8 EcVersionString[8];
+ u8 Tsid[12];
+ } VpdInfo;
+ __le32 FlashFirmwareRevision;
+ __le32 FlashFirmwareBuild;
+ __le32 RaidTypeMorphOptions;
+ __le32 FlashFirmwareBootRevision;
+ __le32 FlashFirmwareBootBuild;
+ u8 MfgPcbaSerialNo[12];
+ u8 MfgWWNName[8];
+ __le32 MoreFeatureBits;
+ __le32 ReservedGrowth[1];
};
#define AAC_FEATURE_FALCON 0x00000010
#define AAC_SIS_VERSION_V3 3
@@ -970,7 +950,6 @@ struct aac_dev
struct fib *fibs;
struct fib *free_fib;
- struct fib *timeout_fib;
spinlock_t fib_lock;
struct aac_queue_block *queues;
@@ -1060,6 +1039,9 @@ struct aac_dev
#define aac_adapter_check_health(dev) \
(dev)->a_ops.adapter_check_health(dev)
+#define aac_adapter_restart(dev,bled) \
+ (dev)->a_ops.adapter_restart(dev,bled)
+
#define aac_adapter_ioremap(dev, size) \
(dev)->a_ops.adapter_ioremap(dev, size)
@@ -1516,8 +1498,7 @@ struct aac_mntent {
struct creation_info create_info; /* if applicable */
__le32 capacity;
__le32 vol; /* substrate structure */
- __le32 obj; /* FT_FILESYS,
- FT_DATABASE, etc. */
+ __le32 obj; /* FT_FILESYS, etc. */
__le32 state; /* unready for mounting,
readonly, etc. */
union aac_contentinfo fileinfo; /* Info specific to content
@@ -1817,7 +1798,7 @@ int aac_fib_send(u16 command, struct fib * context, unsigned long size, int prio
int aac_consumer_get(struct aac_dev * dev, struct aac_queue * q, struct aac_entry **entry);
void aac_consumer_free(struct aac_dev * dev, struct aac_queue * q, u32 qnum);
int aac_fib_complete(struct fib * context);
-#define fib_data(fibctx) ((void *)(fibctx)->hw_fib->data)
+#define fib_data(fibctx) ((void *)(fibctx)->hw_fib_va->data)
struct aac_dev *aac_init_adapter(struct aac_dev *dev);
int aac_get_config_status(struct aac_dev *dev, int commit_flag);
int aac_get_containers(struct aac_dev *dev);
@@ -1840,8 +1821,11 @@ struct aac_driver_ident* aac_get_driver_ident(int devtype);
int aac_get_adapter_info(struct aac_dev* dev);
int aac_send_shutdown(struct aac_dev *dev);
int aac_probe_container(struct aac_dev *dev, int cid);
+int _aac_rx_init(struct aac_dev *dev);
+int aac_rx_select_comm(struct aac_dev *dev, int comm);
extern int numacb;
extern int acbsize;
extern char aac_driver_version[];
extern int startup_timeout;
extern int aif_timeout;
+extern int expose_physicals;
diff --git a/drivers/scsi/aacraid/commctrl.c b/drivers/scsi/aacraid/commctrl.c
index e21070f4eac..72b0393b459 100644
--- a/drivers/scsi/aacraid/commctrl.c
+++ b/drivers/scsi/aacraid/commctrl.c
@@ -5,7 +5,7 @@
* based on the old aacraid driver that is..
* Adaptec aacraid device driver for Linux.
*
- * Copyright (c) 2000 Adaptec, Inc. (aacraid@adaptec.com)
+ * Copyright (c) 2000-2007 Adaptec, Inc. (aacraid@adaptec.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -64,12 +64,15 @@ static int ioctl_send_fib(struct aac_dev * dev, void __user *arg)
unsigned size;
int retval;
+ if (dev->in_reset) {
+ return -EBUSY;
+ }
fibptr = aac_fib_alloc(dev);
if(fibptr == NULL) {
return -ENOMEM;
}
- kfib = fibptr->hw_fib;
+ kfib = fibptr->hw_fib_va;
/*
* First copy in the header so that we can check the size field.
*/
@@ -91,9 +94,9 @@ static int ioctl_send_fib(struct aac_dev * dev, void __user *arg)
goto cleanup;
}
/* Highjack the hw_fib */
- hw_fib = fibptr->hw_fib;
+ hw_fib = fibptr->hw_fib_va;
hw_fib_pa = fibptr->hw_fib_pa;
- fibptr->hw_fib = kfib = pci_alloc_consistent(dev->pdev, size, &fibptr->hw_fib_pa);
+ fibptr->hw_fib_va = kfib = pci_alloc_consistent(dev->pdev, size, &fibptr->hw_fib_pa);
memset(((char *)kfib) + dev->max_fib_size, 0, size - dev->max_fib_size);
memcpy(kfib, hw_fib, dev->max_fib_size);
}
@@ -137,7 +140,7 @@ cleanup:
if (hw_fib) {
pci_free_consistent(dev->pdev, size, kfib, fibptr->hw_fib_pa);
fibptr->hw_fib_pa = hw_fib_pa;
- fibptr->hw_fib = hw_fib;
+ fibptr->hw_fib_va = hw_fib;
}
if (retval != -EINTR)
aac_fib_free(fibptr);
@@ -282,15 +285,15 @@ return_fib:
fib = list_entry(entry, struct fib, fiblink);
fibctx->count--;
spin_unlock_irqrestore(&dev->fib_lock, flags);
- if (copy_to_user(f.fib, fib->hw_fib, sizeof(struct hw_fib))) {
- kfree(fib->hw_fib);
+ if (copy_to_user(f.fib, fib->hw_fib_va, sizeof(struct hw_fib))) {
+ kfree(fib->hw_fib_va);
kfree(fib);
return -EFAULT;
}
/*
* Free the space occupied by this copy of the fib.
*/
- kfree(fib->hw_fib);
+ kfree(fib->hw_fib_va);
kfree(fib);
status = 0;
} else {
@@ -340,7 +343,7 @@ int aac_close_fib_context(struct aac_dev * dev, struct aac_fib_context * fibctx)
/*
* Free the space occupied by this copy of the fib.
*/
- kfree(fib->hw_fib);
+ kfree(fib->hw_fib_va);
kfree(fib);
}
/*
@@ -388,10 +391,8 @@ static int close_getadapter_fib(struct aac_dev * dev, void __user *arg)
/*
* Extract the fibctx from the input parameters
*/
- if (fibctx->unique == (u32)(unsigned long)arg) {
- /* We found a winner */
+ if (fibctx->unique == (u32)(ptrdiff_t)arg) /* We found a winner */
break;
- }
entry = entry->next;
fibctx = NULL;
}
@@ -465,16 +466,20 @@ static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg)
void *sg_list[32];
u32 sg_indx = 0;
u32 byte_count = 0;
- u32 actual_fibsize = 0;
+ u32 actual_fibsize64, actual_fibsize = 0;
int i;
+ if (dev->in_reset) {
+ dprintk((KERN_DEBUG"aacraid: send raw srb -EBUSY\n"));
+ return -EBUSY;
+ }
if (!capable(CAP_SYS_ADMIN)){
dprintk((KERN_DEBUG"aacraid: No permission to send raw srb\n"));
return -EPERM;
}
/*
- * Allocate and initialize a Fib then setup a BlockWrite command
+ * Allocate and initialize a Fib then setup a SRB command
*/
if (!(srbfib = aac_fib_alloc(dev))) {
return -ENOMEM;
@@ -541,129 +546,183 @@ static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg)
rcode = -EINVAL;
goto cleanup;
}
- if (dev->dac_support == 1) {
+ actual_fibsize = sizeof(struct aac_srb) - sizeof(struct sgentry) +
+ ((user_srbcmd->sg.count & 0xff) * sizeof(struct sgentry));
+ actual_fibsize64 = actual_fibsize + (user_srbcmd->sg.count & 0xff) *
+ (sizeof(struct sgentry64) - sizeof(struct sgentry));
+ /* User made a mistake - should not continue */
+ if ((actual_fibsize != fibsize) && (actual_fibsize64 != fibsize)) {
+ dprintk((KERN_DEBUG"aacraid: Bad Size specified in "
+ "Raw SRB command calculated fibsize=%lu;%lu "
+ "user_srbcmd->sg.count=%d aac_srb=%lu sgentry=%lu;%lu "
+ "issued fibsize=%d\n",
+ actual_fibsize, actual_fibsize64, user_srbcmd->sg.count,
+ sizeof(struct aac_srb), sizeof(struct sgentry),
+ sizeof(struct sgentry64), fibsize));
+ rcode = -EINVAL;
+ goto cleanup;
+ }
+ if ((data_dir == DMA_NONE) && user_srbcmd->sg.count) {
+ dprintk((KERN_DEBUG"aacraid: SG with no direction specified in Raw SRB command\n"));
+ rcode = -EINVAL;
+ goto cleanup;
+ }
+ byte_count = 0;
+ if (dev->adapter_info.options & AAC_OPT_SGMAP_HOST64) {
struct user_sgmap64* upsg = (struct user_sgmap64*)&user_srbcmd->sg;
struct sgmap64* psg = (struct sgmap64*)&srbcmd->sg;
- struct user_sgmap* usg;
- byte_count = 0;
/*
* This should also catch if user used the 32 bit sgmap
*/
- actual_fibsize = sizeof(struct aac_srb) -
- sizeof(struct sgentry) +
- ((upsg->count & 0xff) *
- sizeof(struct sgentry));
- if(actual_fibsize != fibsize){ // User made a mistake - should not continue
- dprintk((KERN_DEBUG"aacraid: Bad Size specified in Raw SRB command\n"));
- rcode = -EINVAL;
- goto cleanup;
- }
- usg = kmalloc(actual_fibsize - sizeof(struct aac_srb)
- + sizeof(struct sgmap), GFP_KERNEL);
- if (!usg) {
- dprintk((KERN_DEBUG"aacraid: Allocation error in Raw SRB command\n"));
- rcode = -ENOMEM;
- goto cleanup;
- }
- memcpy (usg, upsg, actual_fibsize - sizeof(struct aac_srb)
- + sizeof(struct sgmap));
- actual_fibsize = sizeof(struct aac_srb) -
- sizeof(struct sgentry) + ((usg->count & 0xff) *
- sizeof(struct sgentry64));
- if ((data_dir == DMA_NONE) && upsg->count) {
- kfree (usg);
- dprintk((KERN_DEBUG"aacraid: SG with no direction specified in Raw SRB command\n"));
- rcode = -EINVAL;
- goto cleanup;
- }
+ if (actual_fibsize64 == fibsize) {
+ actual_fibsize = actual_fibsize64;
+ for (i = 0; i < upsg->count; i++) {
+ u64 addr;
+ void* p;
+ /* Does this really need to be GFP_DMA? */
+ p = kmalloc(upsg->sg[i].count,GFP_KERNEL|__GFP_DMA);
+ if(p == 0) {
+ dprintk((KERN_DEBUG"aacraid: Could not allocate SG buffer - size = %d buffer number %d of %d\n",
+ upsg->sg[i].count,i,upsg->count));
+ rcode = -ENOMEM;
+ goto cleanup;
+ }
+ addr = (u64)upsg->sg[i].addr[0];
+ addr += ((u64)upsg->sg[i].addr[1]) << 32;
+ sg_user[i] = (void __user *)(ptrdiff_t)addr;
+ sg_list[i] = p; // save so we can clean up later
+ sg_indx = i;
+
+ if( flags & SRB_DataOut ){
+ if(copy_from_user(p,sg_user[i],upsg->sg[i].count)){
+ dprintk((KERN_DEBUG"aacraid: Could not copy sg data from user\n"));
+ rcode = -EFAULT;
+ goto cleanup;
+ }
+ }
+ addr = pci_map_single(dev->pdev, p, upsg->sg[i].count, data_dir);
- for (i = 0; i < usg->count; i++) {
- u64 addr;
- void* p;
- /* Does this really need to be GFP_DMA? */
- p = kmalloc(usg->sg[i].count,GFP_KERNEL|__GFP_DMA);
- if(p == 0) {
- kfree (usg);
- dprintk((KERN_DEBUG"aacraid: Could not allocate SG buffer - size = %d buffer number %d of %d\n",
- usg->sg[i].count,i,usg->count));
+ psg->sg[i].addr[0] = cpu_to_le32(addr & 0xffffffff);
+ psg->sg[i].addr[1] = cpu_to_le32(addr>>32);
+ byte_count += upsg->sg[i].count;
+ psg->sg[i].count = cpu_to_le32(upsg->sg[i].count);
+ }
+ } else {
+ struct user_sgmap* usg;
+ usg = kmalloc(actual_fibsize - sizeof(struct aac_srb)
+ + sizeof(struct sgmap), GFP_KERNEL);
+ if (!usg) {
+ dprintk((KERN_DEBUG"aacraid: Allocation error in Raw SRB command\n"));
rcode = -ENOMEM;
goto cleanup;
}
- sg_user[i] = (void __user *)(long)usg->sg[i].addr;
- sg_list[i] = p; // save so we can clean up later
- sg_indx = i;
-
- if( flags & SRB_DataOut ){
- if(copy_from_user(p,sg_user[i],upsg->sg[i].count)){
+ memcpy (usg, upsg, actual_fibsize - sizeof(struct aac_srb)
+ + sizeof(struct sgmap));
+ actual_fibsize = actual_fibsize64;
+
+ for (i = 0; i < usg->count; i++) {
+ u64 addr;
+ void* p;
+ /* Does this really need to be GFP_DMA? */
+ p = kmalloc(usg->sg[i].count,GFP_KERNEL|__GFP_DMA);
+ if(p == 0) {
kfree (usg);
- dprintk((KERN_DEBUG"aacraid: Could not copy sg data from user\n"));
- rcode = -EFAULT;
+ dprintk((KERN_DEBUG"aacraid: Could not allocate SG buffer - size = %d buffer number %d of %d\n",
+ usg->sg[i].count,i,usg->count));
+ rcode = -ENOMEM;
goto cleanup;
}
- }
- addr = pci_map_single(dev->pdev, p, usg->sg[i].count, data_dir);
+ sg_user[i] = (void __user *)(ptrdiff_t)usg->sg[i].addr;
+ sg_list[i] = p; // save so we can clean up later
+ sg_indx = i;
+
+ if( flags & SRB_DataOut ){
+ if(copy_from_user(p,sg_user[i],upsg->sg[i].count)){
+ kfree (usg);
+ dprintk((KERN_DEBUG"aacraid: Could not copy sg data from user\n"));
+ rcode = -EFAULT;
+ goto cleanup;
+ }
+ }
+ addr = pci_map_single(dev->pdev, p, usg->sg[i].count, data_dir);
- psg->sg[i].addr[0] = cpu_to_le32(addr & 0xffffffff);
- psg->sg[i].addr[1] = cpu_to_le32(addr>>32);
- psg->sg[i].count = cpu_to_le32(usg->sg[i].count);
- byte_count += usg->sg[i].count;
+ psg->sg[i].addr[0] = cpu_to_le32(addr & 0xffffffff);
+ psg->sg[i].addr[1] = cpu_to_le32(addr>>32);
+ byte_count += usg->sg[i].count;
+ psg->sg[i].count = cpu_to_le32(usg->sg[i].count);
+ }
+ kfree (usg);
}
- kfree (usg);
-
srbcmd->count = cpu_to_le32(byte_count);
psg->count = cpu_to_le32(sg_indx+1);
status = aac_fib_send(ScsiPortCommand64, srbfib, actual_fibsize, FsaNormal, 1, 1,NULL,NULL);
} else {
struct user_sgmap* upsg = &user_srbcmd->sg;
struct sgmap* psg = &srbcmd->sg;
- byte_count = 0;
-
- actual_fibsize = sizeof (struct aac_srb) + (((user_srbcmd->sg.count & 0xff) - 1) * sizeof (struct sgentry));
- if(actual_fibsize != fibsize){ // User made a mistake - should not continue
- dprintk((KERN_DEBUG"aacraid: Bad Size specified in "
- "Raw SRB command calculated fibsize=%d "
- "user_srbcmd->sg.count=%d aac_srb=%d sgentry=%d "
- "issued fibsize=%d\n",
- actual_fibsize, user_srbcmd->sg.count,
- sizeof(struct aac_srb), sizeof(struct sgentry),
- fibsize));
- rcode = -EINVAL;
- goto cleanup;
- }
- if ((data_dir == DMA_NONE) && upsg->count) {
- dprintk((KERN_DEBUG"aacraid: SG with no direction specified in Raw SRB command\n"));
- rcode = -EINVAL;
- goto cleanup;
- }
- for (i = 0; i < upsg->count; i++) {
- dma_addr_t addr;
- void* p;
- p = kmalloc(upsg->sg[i].count, GFP_KERNEL);
- if(p == 0) {
- dprintk((KERN_DEBUG"aacraid: Could not allocate SG buffer - size = %d buffer number %d of %d\n",
- upsg->sg[i].count, i, upsg->count));
- rcode = -ENOMEM;
- goto cleanup;
- }
- sg_user[i] = (void __user *)(long)upsg->sg[i].addr;
- sg_list[i] = p; // save so we can clean up later
- sg_indx = i;
-
- if( flags & SRB_DataOut ){
- if(copy_from_user(p, sg_user[i],
- upsg->sg[i].count)) {
- dprintk((KERN_DEBUG"aacraid: Could not copy sg data from user\n"));
- rcode = -EFAULT;
+
+ if (actual_fibsize64 == fibsize) {
+ struct user_sgmap64* usg = (struct user_sgmap64 *)upsg;
+ for (i = 0; i < upsg->count; i++) {
+ u64 addr;
+ void* p;
+ /* Does this really need to be GFP_DMA? */
+ p = kmalloc(usg->sg[i].count,GFP_KERNEL|__GFP_DMA);
+ if(p == 0) {
+ dprintk((KERN_DEBUG"aacraid: Could not allocate SG buffer - size = %d buffer number %d of %d\n",
+ usg->sg[i].count,i,usg->count));
+ rcode = -ENOMEM;
goto cleanup;
}
+ addr = (u64)usg->sg[i].addr[0];
+ addr += ((u64)usg->sg[i].addr[1]) << 32;
+ sg_user[i] = (void __user *)(ptrdiff_t)addr;
+ sg_list[i] = p; // save so we can clean up later
+ sg_indx = i;
+
+ if( flags & SRB_DataOut ){
+ if(copy_from_user(p,sg_user[i],usg->sg[i].count)){
+ dprintk((KERN_DEBUG"aacraid: Could not copy sg data from user\n"));
+ rcode = -EFAULT;
+ goto cleanup;
+ }
+ }
+ addr = pci_map_single(dev->pdev, p, usg->sg[i].count, data_dir);
+
+ psg->sg[i].addr = cpu_to_le32(addr & 0xffffffff);
+ byte_count += usg->sg[i].count;
+ psg->sg[i].count = cpu_to_le32(usg->sg[i].count);
}
- addr = pci_map_single(dev->pdev, p,
- upsg->sg[i].count, data_dir);
+ } else {
+ for (i = 0; i < upsg->count; i++) {
+ dma_addr_t addr;
+ void* p;
+ p = kmalloc(upsg->sg[i].count, GFP_KERNEL);
+ if(p == 0) {
+ dprintk((KERN_DEBUG"aacraid: Could not allocate SG buffer - size = %d buffer number %d of %d\n",
+ upsg->sg[i].count, i, upsg->count));
+ rcode = -ENOMEM;
+ goto cleanup;
+ }
+ sg_user[i] = (void __user *)(ptrdiff_t)upsg->sg[i].addr;
+ sg_list[i] = p; // save so we can clean up later
+ sg_indx = i;
+
+ if( flags & SRB_DataOut ){
+ if(copy_from_user(p, sg_user[i],
+ upsg->sg[i].count)) {
+ dprintk((KERN_DEBUG"aacraid: Could not copy sg data from user\n"));
+ rcode = -EFAULT;
+ goto cleanup;
+ }
+ }
+ addr = pci_map_single(dev->pdev, p,
+ upsg->sg[i].count, data_dir);
- psg->sg[i].addr = cpu_to_le32(addr);
- psg->sg[i].count = cpu_to_le32(upsg->sg[i].count);
- byte_count += upsg->sg[i].count;
+ psg->sg[i].addr = cpu_to_le32(addr);
+ byte_count += upsg->sg[i].count;
+ psg->sg[i].count = cpu_to_le32(upsg->sg[i].count);
+ }
}
srbcmd->count = cpu_to_le32(byte_count);
psg->count = cpu_to_le32(sg_indx+1);
@@ -682,7 +741,8 @@ static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg)
if( flags & SRB_DataIn ) {
for(i = 0 ; i <= sg_indx; i++){
- byte_count = le32_to_cpu((dev->dac_support == 1)
+ byte_count = le32_to_cpu(
+ (dev->adapter_info.options & AAC_OPT_SGMAP_HOST64)
? ((struct sgmap64*)&srbcmd->sg)->sg[i].count
: srbcmd->sg.sg[i].count);
if(copy_to_user(sg_user[i], sg_list[i], byte_count)){
diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c
index ae34768987a..33682ce96a5 100644
--- a/drivers/scsi/aacraid/comminit.c
+++ b/drivers/scsi/aacraid/comminit.c
@@ -5,7 +5,7 @@
* based on the old aacraid driver that is..
* Adaptec aacraid device driver for Linux.
*
- * Copyright (c) 2000 Adaptec, Inc. (aacraid@adaptec.com)
+ * Copyright (c) 2000-2007 Adaptec, Inc. (aacraid@adaptec.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -110,7 +110,7 @@ static int aac_alloc_comm(struct aac_dev *dev, void **commaddr, unsigned long co
/*
* Align the beginning of Headers to commalign
*/
- align = (commalign - ((unsigned long)(base) & (commalign - 1)));
+ align = (commalign - ((ptrdiff_t)(base) & (commalign - 1)));
base = base + align;
phys = phys + align;
/*
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index 1b97f60652b..5824a757a75 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -5,7 +5,7 @@
* based on the old aacraid driver that is..
* Adaptec aacraid device driver for Linux.
*
- * Copyright (c) 2000 Adaptec, Inc. (aacraid@adaptec.com)
+ * Copyright (c) 2000-2007 Adaptec, Inc. (aacraid@adaptec.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -94,7 +94,7 @@ void aac_fib_map_free(struct aac_dev *dev)
int aac_fib_setup(struct aac_dev * dev)
{
struct fib *fibptr;
- struct hw_fib *hw_fib_va;
+ struct hw_fib *hw_fib;
dma_addr_t hw_fib_pa;
int i;
@@ -106,24 +106,24 @@ int aac_fib_setup(struct aac_dev * dev)
if (i<0)
return -ENOMEM;
- hw_fib_va = dev->hw_fib_va;
+ hw_fib = dev->hw_fib_va;
hw_fib_pa = dev->hw_fib_pa;
- memset(hw_fib_va, 0, dev->max_fib_size * (dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB));
+ memset(hw_fib, 0, dev->max_fib_size * (dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB));
/*
* Initialise the fibs
*/
for (i = 0, fibptr = &dev->fibs[i]; i < (dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB); i++, fibptr++)
{
fibptr->dev = dev;
- fibptr->hw_fib = hw_fib_va;
- fibptr->data = (void *) fibptr->hw_fib->data;
+ fibptr->hw_fib_va = hw_fib;
+ fibptr->data = (void *) fibptr->hw_fib_va->data;
fibptr->next = fibptr+1; /* Forward chain the fibs */
init_MUTEX_LOCKED(&fibptr->event_wait);
spin_lock_init(&fibptr->event_lock);
- hw_fib_va->header.XferState = cpu_to_le32(0xffffffff);
- hw_fib_va->header.SenderSize = cpu_to_le16(dev->max_fib_size);
+ hw_fib->header.XferState = cpu_to_le32(0xffffffff);
+ hw_fib->header.SenderSize = cpu_to_le16(dev->max_fib_size);
fibptr->hw_fib_pa = hw_fib_pa;
- hw_fib_va = (struct hw_fib *)((unsigned char *)hw_fib_va + dev->max_fib_size);
+ hw_fib = (struct hw_fib *)((unsigned char *)hw_fib + dev->max_fib_size);
hw_fib_pa = hw_fib_pa + dev->max_fib_size;
}
/*
@@ -166,7 +166,7 @@ struct fib *aac_fib_alloc(struct aac_dev *dev)
* Null out fields that depend on being zero at the start of
* each I/O
*/
- fibptr->hw_fib->header.XferState = 0;
+ fibptr->hw_fib_va->header.XferState = 0;
fibptr->callback = NULL;
fibptr->callback_data = NULL;
@@ -178,7 +178,6 @@ struct fib *aac_fib_alloc(struct aac_dev *dev)
* @fibptr: fib to free up
*
* Frees up a fib and places it on the appropriate queue
- * (either free or timed out)
*/
void aac_fib_free(struct fib *fibptr)
@@ -186,19 +185,15 @@ void aac_fib_free(struct fib *fibptr)
unsigned long flags;
spin_lock_irqsave(&fibptr->dev->fib_lock, flags);
- if (fibptr->flags & FIB_CONTEXT_FLAG_TIMED_OUT) {
+ if (unlikely(fibptr->flags & FIB_CONTEXT_FLAG_TIMED_OUT))
aac_config.fib_timeouts++;
- fibptr->next = fibptr->dev->timeout_fib;
- fibptr->dev->timeout_fib = fibptr;
- } else {
- if (fibptr->hw_fib->header.XferState != 0) {
- printk(KERN_WARNING "aac_fib_free, XferState != 0, fibptr = 0x%p, XferState = 0x%x\n",
- (void*)fibptr,
- le32_to_cpu(fibptr->hw_fib->header.XferState));
- }
- fibptr->next = fibptr->dev->free_fib;
- fibptr->dev->free_fib = fibptr;
- }
+ if (fibptr->hw_fib_va->header.XferState != 0) {
+ printk(KERN_WARNING "aac_fib_free, XferState != 0, fibptr = 0x%p, XferState = 0x%x\n",
+ (void*)fibptr,
+ le32_to_cpu(fibptr->hw_fib_va->header.XferState));
+ }
+ fibptr->next = fibptr->dev->free_fib;
+ fibptr->dev->free_fib = fibptr;
spin_unlock_irqrestore(&fibptr->dev->fib_lock, flags);
}
@@ -211,7 +206,7 @@ void aac_fib_free(struct fib *fibptr)
void aac_fib_init(struct fib *fibptr)
{
- struct hw_fib *hw_fib = fibptr->hw_fib;
+ struct hw_fib *hw_fib = fibptr->hw_fib_va;
hw_fib->header.StructType = FIB_MAGIC;
hw_fib->header.Size = cpu_to_le16(fibptr->dev->max_fib_size);
@@ -231,7 +226,7 @@ void aac_fib_init(struct fib *fibptr)
static void fib_dealloc(struct fib * fibptr)
{
- struct hw_fib *hw_fib = fibptr->hw_fib;
+ struct hw_fib *hw_fib = fibptr->hw_fib_va;
BUG_ON(hw_fib->header.StructType != FIB_MAGIC);
hw_fib->header.XferState = 0;
}
@@ -386,7 +381,7 @@ int aac_fib_send(u16 command, struct fib *fibptr, unsigned long size,
void *callback_data)
{
struct aac_dev * dev = fibptr->dev;
- struct hw_fib * hw_fib = fibptr->hw_fib;
+ struct hw_fib * hw_fib = fibptr->hw_fib_va;
unsigned long flags = 0;
unsigned long qflags;
@@ -430,7 +425,7 @@ int aac_fib_send(u16 command, struct fib *fibptr, unsigned long size,
*/
hw_fib->header.Command = cpu_to_le16(command);
hw_fib->header.XferState |= cpu_to_le32(SentFromHost);
- fibptr->hw_fib->header.Flags = 0; /* 0 the flags field - internal only*/
+ fibptr->hw_fib_va->header.Flags = 0; /* 0 the flags field - internal only*/
/*
* Set the size of the Fib we want to send to the adapter
*/
@@ -462,7 +457,7 @@ int aac_fib_send(u16 command, struct fib *fibptr, unsigned long size,
dprintk((KERN_DEBUG " Command = %d.\n", le32_to_cpu(hw_fib->header.Command)));
dprintk((KERN_DEBUG " SubCommand = %d.\n", le32_to_cpu(((struct aac_query_mount *)fib_data(fibptr))->command)));
dprintk((KERN_DEBUG " XferState = %x.\n", le32_to_cpu(hw_fib->header.XferState)));
- dprintk((KERN_DEBUG " hw_fib va being sent=%p\n",fibptr->hw_fib));
+ dprintk((KERN_DEBUG " hw_fib va being sent=%p\n",fibptr->hw_fib_va));
dprintk((KERN_DEBUG " hw_fib pa being sent=%lx\n",(ulong)fibptr->hw_fib_pa));
dprintk((KERN_DEBUG " fib being sent=%p\n",fibptr));
@@ -513,22 +508,20 @@ int aac_fib_send(u16 command, struct fib *fibptr, unsigned long size,
}
udelay(5);
}
- } else if (down_interruptible(&fibptr->event_wait)) {
- spin_lock_irqsave(&fibptr->event_lock, flags);
- if (fibptr->done == 0) {
- fibptr->done = 2; /* Tell interrupt we aborted */
- spin_unlock_irqrestore(&fibptr->event_lock, flags);
- return -EINTR;
- }
+ } else
+ (void)down_interruptible(&fibptr->event_wait);
+ spin_lock_irqsave(&fibptr->event_lock, flags);
+ if (fibptr->done == 0) {
+ fibptr->done = 2; /* Tell interrupt we aborted */
spin_unlock_irqrestore(&fibptr->event_lock, flags);
+ return -EINTR;
}
+ spin_unlock_irqrestore(&fibptr->event_lock, flags);
BUG_ON(fibptr->done == 0);
- if((fibptr->flags & FIB_CONTEXT_FLAG_TIMED_OUT)){
+ if(unlikely(fibptr->flags & FIB_CONTEXT_FLAG_TIMED_OUT))
return -ETIMEDOUT;
- } else {
- return 0;
- }
+ return 0;
}
/*
* If the user does not want a response than return success otherwise
@@ -624,7 +617,7 @@ void aac_consumer_free(struct aac_dev * dev, struct aac_queue *q, u32 qid)
int aac_fib_adapter_complete(struct fib *fibptr, unsigned short size)
{
- struct hw_fib * hw_fib = fibptr->hw_fib;
+ struct hw_fib * hw_fib = fibptr->hw_fib_va;
struct aac_dev * dev = fibptr->dev;
struct aac_queue * q;
unsigned long nointr = 0;
@@ -688,7 +681,7 @@ int aac_fib_adapter_complete(struct fib *fibptr, unsigned short size)
int aac_fib_complete(struct fib *fibptr)
{
- struct hw_fib * hw_fib = fibptr->hw_fib;
+ struct hw_fib * hw_fib = fibptr->hw_fib_va;
/*
* Check for a fib which has already been completed
@@ -774,9 +767,8 @@ void aac_printf(struct aac_dev *dev, u32 val)
#define AIF_SNIFF_TIMEOUT (30*HZ)
static void aac_handle_aif(struct aac_dev * dev, struct fib * fibptr)
{
- struct hw_fib * hw_fib = fibptr->hw_fib;
+ struct hw_fib * hw_fib = fibptr->hw_fib_va;
struct aac_aifcmd * aifcmd = (struct aac_aifcmd *)hw_fib->data;
- int busy;
u32 container;
struct scsi_device *device;
enum {
@@ -988,9 +980,6 @@ static void aac_handle_aif(struct aac_dev * dev, struct fib * fibptr)
* behind you.
*/
- busy = 0;
-
-
/*
* Find the scsi_device associated with the SCSI address,
* and mark it as changed, invalidating the cache. This deals
@@ -1035,7 +1024,6 @@ static void aac_handle_aif(struct aac_dev * dev, struct fib * fibptr)
static int _aac_reset_adapter(struct aac_dev *aac)
{
int index, quirks;
- u32 ret;
int retval;
struct Scsi_Host *host;
struct scsi_device *dev;
@@ -1059,35 +1047,29 @@ static int _aac_reset_adapter(struct aac_dev *aac)
* If a positive health, means in a known DEAD PANIC
* state and the adapter could be reset to `try again'.
*/
- retval = aac_adapter_check_health(aac);
- if (retval == 0)
- retval = aac_adapter_sync_cmd(aac, IOP_RESET_ALWAYS,
- 0, 0, 0, 0, 0, 0, &ret, NULL, NULL, NULL, NULL);
- if (retval)
- retval = aac_adapter_sync_cmd(aac, IOP_RESET,
- 0, 0, 0, 0, 0, 0, &ret, NULL, NULL, NULL, NULL);
+ retval = aac_adapter_restart(aac, aac_adapter_check_health(aac));
if (retval)
goto out;
- if (ret != 0x00000001) {
- retval = -ENODEV;
- goto out;
- }
/*
* Loop through the fibs, close the synchronous FIBS
*/
- for (index = 0; index < (aac->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB); index++) {
+ for (retval = 1, index = 0; index < (aac->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB); index++) {
struct fib *fib = &aac->fibs[index];
- if (!(fib->hw_fib->header.XferState & cpu_to_le32(NoResponseExpected | Async)) &&
- (fib->hw_fib->header.XferState & cpu_to_le32(ResponseExpected))) {
+ if (!(fib->hw_fib_va->header.XferState & cpu_to_le32(NoResponseExpected | Async)) &&
+ (fib->hw_fib_va->header.XferState & cpu_to_le32(ResponseExpected))) {
unsigned long flagv;
spin_lock_irqsave(&fib->event_lock, flagv);
up(&fib->event_wait);
spin_unlock_irqrestore(&fib->event_lock, flagv);
schedule();
+ retval = 0;
}
}
+ /* Give some extra time for ioctls to complete. */
+ if (retval == 0)
+ ssleep(2);
index = aac->cardtype;
/*
@@ -1248,7 +1230,7 @@ int aac_check_health(struct aac_dev * aac)
memset(hw_fib, 0, sizeof(struct hw_fib));
memset(fib, 0, sizeof(struct fib));
- fib->hw_fib = hw_fib;
+ fib->hw_fib_va = hw_fib;
fib->dev = aac;
aac_fib_init(fib);
fib->type = FSAFS_NTC_FIB_CONTEXT;
@@ -1354,11 +1336,11 @@ int aac_command_thread(void *data)
* do anything at this point since we don't have
* anything defined for this thread to do.
*/
- hw_fib = fib->hw_fib;
+ hw_fib = fib->hw_fib_va;
memset(fib, 0, sizeof(struct fib));
fib->type = FSAFS_NTC_FIB_CONTEXT;
fib->size = sizeof( struct fib );
- fib->hw_fib = hw_fib;
+ fib->hw_fib_va = hw_fib;
fib->data = hw_fib->data;
fib->dev = dev;
/*
@@ -1485,7 +1467,7 @@ int aac_command_thread(void *data)
*/
memcpy(hw_newfib, hw_fib, sizeof(struct hw_fib));
memcpy(newfib, fib, sizeof(struct fib));
- newfib->hw_fib = hw_newfib;
+ newfib->hw_fib_va = hw_newfib;
/*
* Put the FIB onto the
* fibctx's fibs
diff --git a/drivers/scsi/aacraid/dpcsup.c b/drivers/scsi/aacraid/dpcsup.c
index 66aeb57dcc2..42c7dcda6d9 100644
--- a/drivers/scsi/aacraid/dpcsup.c
+++ b/drivers/scsi/aacraid/dpcsup.c
@@ -5,7 +5,7 @@
* based on the old aacraid driver that is..
* Adaptec aacraid device driver for Linux.
*
- * Copyright (c) 2000 Adaptec, Inc. (aacraid@adaptec.com)
+ * Copyright (c) 2000-2007 Adaptec, Inc. (aacraid@adaptec.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -72,7 +72,7 @@ unsigned int aac_response_normal(struct aac_queue * q)
u32 index = le32_to_cpu(entry->addr);
fast = index & 0x01;
fib = &dev->fibs[index >> 2];
- hwfib = fib->hw_fib;
+ hwfib = fib->hw_fib_va;
aac_consumer_free(dev, q, HostNormRespQueue);
/*
@@ -83,11 +83,13 @@ unsigned int aac_response_normal(struct aac_queue * q)
* continue. The caller has already been notified that
* the fib timed out.
*/
- if (!(fib->flags & FIB_CONTEXT_FLAG_TIMED_OUT))
- dev->queues->queue[AdapNormCmdQueue].numpending--;
- else {
- printk(KERN_WARNING "aacraid: FIB timeout (%x).\n", fib->flags);
- printk(KERN_DEBUG"aacraid: hwfib=%p fib index=%i fib=%p\n",hwfib, hwfib->header.SenderData,fib);
+ dev->queues->queue[AdapNormCmdQueue].numpending--;
+
+ if (unlikely(fib->flags & FIB_CONTEXT_FLAG_TIMED_OUT)) {
+ spin_unlock_irqrestore(q->lock, flags);
+ aac_fib_complete(fib);
+ aac_fib_free(fib);
+ spin_lock_irqsave(q->lock, flags);
continue;
}
spin_unlock_irqrestore(q->lock, flags);
@@ -192,7 +194,7 @@ unsigned int aac_command_normal(struct aac_queue *q)
INIT_LIST_HEAD(&fib->fiblink);
fib->type = FSAFS_NTC_FIB_CONTEXT;
fib->size = sizeof(struct fib);
- fib->hw_fib = hw_fib;
+ fib->hw_fib_va = hw_fib;
fib->data = hw_fib->data;
fib->dev = dev;
@@ -253,12 +255,13 @@ unsigned int aac_intr_normal(struct aac_dev * dev, u32 Index)
return 1;
}
memset(hw_fib, 0, sizeof(struct hw_fib));
- memcpy(hw_fib, (struct hw_fib *)(((unsigned long)(dev->regs.sa)) + (index & ~0x00000002L)), sizeof(struct hw_fib));
+ memcpy(hw_fib, (struct hw_fib *)(((ptrdiff_t)(dev->regs.sa)) +
+ (index & ~0x00000002L)), sizeof(struct hw_fib));
memset(fib, 0, sizeof(struct fib));
INIT_LIST_HEAD(&fib->fiblink);
fib->type = FSAFS_NTC_FIB_CONTEXT;
fib->size = sizeof(struct fib);
- fib->hw_fib = hw_fib;
+ fib->hw_fib_va = hw_fib;
fib->data = hw_fib->data;
fib->dev = dev;
@@ -270,7 +273,7 @@ unsigned int aac_intr_normal(struct aac_dev * dev, u32 Index)
} else {
int fast = index & 0x01;
struct fib * fib = &dev->fibs[index >> 2];
- struct hw_fib * hwfib = fib->hw_fib;
+ struct hw_fib * hwfib = fib->hw_fib_va;
/*
* Remove this fib from the Outstanding I/O queue.
@@ -280,14 +283,14 @@ unsigned int aac_intr_normal(struct aac_dev * dev, u32 Index)
* continue. The caller has already been notified that
* the fib timed out.
*/
- if ((fib->flags & FIB_CONTEXT_FLAG_TIMED_OUT)) {
- printk(KERN_WARNING "aacraid: FIB timeout (%x).\n", fib->flags);
- printk(KERN_DEBUG"aacraid: hwfib=%p index=%i fib=%p\n",hwfib, hwfib->header.SenderData,fib);
+ dev->queues->queue[AdapNormCmdQueue].numpending--;
+
+ if (unlikely(fib->flags & FIB_CONTEXT_FLAG_TIMED_OUT)) {
+ aac_fib_complete(fib);
+ aac_fib_free(fib);
return 0;
}
- dev->queues->queue[AdapNormCmdQueue].numpending--;
-
if (fast) {
/*
* Doctor the fib
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 0f948c2fb60..350ea7feb61 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -5,7 +5,7 @@
* based on the old aacraid driver that is..
* Adaptec aacraid device driver for Linux.
*
- * Copyright (c) 2000 Adaptec, Inc. (aacraid@adaptec.com)
+ * Copyright (c) 2000-2007 Adaptec, Inc. (aacraid@adaptec.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -82,8 +82,6 @@ static LIST_HEAD(aac_devices);
static int aac_cfg_major = -1;
char aac_driver_version[] = AAC_DRIVER_FULL_VERSION;
-extern int expose_physicals;
-
/*
* Because of the way Linux names scsi devices, the order in this table has
* become important. Check for on-board Raid first, add-in cards second.
@@ -247,7 +245,19 @@ static struct aac_driver_ident aac_drivers[] = {
static int aac_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
{
+ struct Scsi_Host *host = cmd->device->host;
+ struct aac_dev *dev = (struct aac_dev *)host->hostdata;
+ u32 count = 0;
cmd->scsi_done = done;
+ for (; count < (host->can_queue + AAC_NUM_MGT_FIB); ++count) {
+ struct fib * fib = &dev->fibs[count];
+ struct scsi_cmnd * command;
+ if (fib->hw_fib_va->header.XferState &&
+ ((command = fib->callback_data)) &&
+ (command == cmd) &&
+ (cmd->SCp.phase == AAC_OWNER_FIRMWARE))
+ return 0; /* Already owned by Adapter */
+ }
cmd->SCp.phase = AAC_OWNER_LOWLEVEL;
return (aac_scsi_cmd(cmd) ? FAILED : 0);
}
@@ -446,6 +456,40 @@ static int aac_ioctl(struct scsi_device *sdev, int cmd, void __user * arg)
return aac_do_ioctl(dev, cmd, arg);
}
+static int aac_eh_abort(struct scsi_cmnd* cmd)
+{
+ struct scsi_device * dev = cmd->device;
+ struct Scsi_Host * host = dev->host;
+ struct aac_dev * aac = (struct aac_dev *)host->hostdata;
+ int count;
+ int ret = FAILED;
+
+ printk(KERN_ERR "%s: Host adapter abort request (%d,%d,%d,%d)\n",
+ AAC_DRIVERNAME,
+ host->host_no, sdev_channel(dev), sdev_id(dev), dev->lun);
+ switch (cmd->cmnd[0]) {
+ case SERVICE_ACTION_IN:
+ if (!(aac->raw_io_interface) ||
+ !(aac->raw_io_64) ||
+ ((cmd->cmnd[1] & 0x1f) != SAI_READ_CAPACITY_16))
+ break;
+ case INQUIRY:
+ case READ_CAPACITY:
+ case TEST_UNIT_READY:
+ /* Mark associated FIB to not complete, eh handler does this */
+ for (count = 0; count < (host->can_queue + AAC_NUM_MGT_FIB); ++count) {
+ struct fib * fib = &aac->fibs[count];
+ if (fib->hw_fib_va->header.XferState &&
+ (fib->callback_data == cmd)) {
+ fib->flags |= FIB_CONTEXT_FLAG_TIMED_OUT;
+ cmd->SCp.phase = AAC_OWNER_ERROR_HANDLER;
+ ret = SUCCESS;
+ }
+ }
+ }
+ return ret;
+}
+
/*
* aac_eh_reset - Reset command handling
* @scsi_cmd: SCSI command block causing the reset
@@ -457,12 +501,20 @@ static int aac_eh_reset(struct scsi_cmnd* cmd)
struct Scsi_Host * host = dev->host;
struct scsi_cmnd * command;
int count;
- struct aac_dev * aac;
+ struct aac_dev * aac = (struct aac_dev *)host->hostdata;
unsigned long flags;
+ /* Mark the associated FIB to not complete, eh handler does this */
+ for (count = 0; count < (host->can_queue + AAC_NUM_MGT_FIB); ++count) {
+ struct fib * fib = &aac->fibs[count];
+ if (fib->hw_fib_va->header.XferState &&
+ (fib->callback_data == cmd)) {
+ fib->flags |= FIB_CONTEXT_FLAG_TIMED_OUT;
+ cmd->SCp.phase = AAC_OWNER_ERROR_HANDLER;
+ }
+ }
printk(KERN_ERR "%s: Host adapter reset request. SCSI hang ?\n",
AAC_DRIVERNAME);
- aac = (struct aac_dev *)host->hostdata;
if ((count = aac_check_health(aac)))
return count;
@@ -496,7 +548,7 @@ static int aac_eh_reset(struct scsi_cmnd* cmd)
ssleep(1);
}
printk(KERN_ERR "%s: SCSI bus appears hung\n", AAC_DRIVERNAME);
- return -ETIMEDOUT;
+ return SUCCESS; /* Cause an immediate retry of the command with a ten second delay after successful tur */
}
/**
@@ -796,6 +848,7 @@ static struct scsi_host_template aac_driver_template = {
.bios_param = aac_biosparm,
.shost_attrs = aac_attrs,
.slave_configure = aac_slave_configure,
+ .eh_abort_handler = aac_eh_abort,
.eh_host_reset_handler = aac_eh_reset,
.can_queue = AAC_NUM_IO_FIB,
.this_id = MAXIMUM_NUM_CONTAINERS,
diff --git a/drivers/scsi/aacraid/nark.c b/drivers/scsi/aacraid/nark.c
index c76b611b6af..a8ace567781 100644
--- a/drivers/scsi/aacraid/nark.c
+++ b/drivers/scsi/aacraid/nark.c
@@ -74,9 +74,6 @@ static int aac_nark_ioremap(struct aac_dev * dev, u32 size)
int aac_nark_init(struct aac_dev * dev)
{
- extern int _aac_rx_init(struct aac_dev *dev);
- extern int aac_rx_select_comm(struct aac_dev *dev, int comm);
-
/*
* Fill in the function dispatch table.
*/
diff --git a/drivers/scsi/aacraid/rkt.c b/drivers/scsi/aacraid/rkt.c
index d953c3fe998..9c5fcfb398c 100644
--- a/drivers/scsi/aacraid/rkt.c
+++ b/drivers/scsi/aacraid/rkt.c
@@ -45,7 +45,6 @@
static int aac_rkt_select_comm(struct aac_dev *dev, int comm)
{
int retval;
- extern int aac_rx_select_comm(struct aac_dev *dev, int comm);
retval = aac_rx_select_comm(dev, comm);
if (comm == AAC_COMM_MESSAGE) {
/*
@@ -97,8 +96,6 @@ static int aac_rkt_ioremap(struct aac_dev * dev, u32 size)
int aac_rkt_init(struct aac_dev *dev)
{
- extern int _aac_rx_init(struct aac_dev *dev);
-
/*
* Fill in the function dispatch table.
*/
diff --git a/drivers/scsi/aacraid/rx.c b/drivers/scsi/aacraid/rx.c
index d242e2611d6..0c71315cbf1 100644
--- a/drivers/scsi/aacraid/rx.c
+++ b/drivers/scsi/aacraid/rx.c
@@ -5,7 +5,7 @@
* based on the old aacraid driver that is..
* Adaptec aacraid device driver for Linux.
*
- * Copyright (c) 2000 Adaptec, Inc. (aacraid@adaptec.com)
+ * Copyright (c) 2000-2007 Adaptec, Inc. (aacraid@adaptec.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -57,25 +57,25 @@ static irqreturn_t aac_rx_intr_producer(int irq, void *dev_id)
* been enabled.
* Check to see if this is our interrupt. If it isn't just return
*/
- if (intstat & ~(dev->OIMR)) {
+ if (likely(intstat & ~(dev->OIMR))) {
bellbits = rx_readl(dev, OutboundDoorbellReg);
- if (bellbits & DoorBellPrintfReady) {
+ if (unlikely(bellbits & DoorBellPrintfReady)) {
aac_printf(dev, readl (&dev->IndexRegs->Mailbox[5]));
rx_writel(dev, MUnit.ODR,DoorBellPrintfReady);
rx_writel(dev, InboundDoorbellReg,DoorBellPrintfDone);
}
- else if (bellbits & DoorBellAdapterNormCmdReady) {
+ else if (unlikely(bellbits & DoorBellAdapterNormCmdReady)) {
rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdReady);
aac_command_normal(&dev->queues->queue[HostNormCmdQueue]);
}
- else if (bellbits & DoorBellAdapterNormRespReady) {
+ else if (likely(bellbits & DoorBellAdapterNormRespReady)) {
rx_writel(dev, MUnit.ODR,DoorBellAdapterNormRespReady);
aac_response_normal(&dev->queues->queue[HostNormRespQueue]);
}
- else if (bellbits & DoorBellAdapterNormCmdNotFull) {
+ else if (unlikely(bellbits & DoorBellAdapterNormCmdNotFull)) {
rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull);
}
- else if (bellbits & DoorBellAdapterNormRespNotFull) {
+ else if (unlikely(bellbits & DoorBellAdapterNormRespNotFull)) {
rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull);
rx_writel(dev, MUnit.ODR, DoorBellAdapterNormRespNotFull);
}
@@ -88,11 +88,11 @@ static irqreturn_t aac_rx_intr_message(int irq, void *dev_id)
{
struct aac_dev *dev = dev_id;
u32 Index = rx_readl(dev, MUnit.OutboundQueue);
- if (Index == 0xFFFFFFFFL)
+ if (unlikely(Index == 0xFFFFFFFFL))
Index = rx_readl(dev, MUnit.OutboundQueue);
- if (Index != 0xFFFFFFFFL) {
+ if (likely(Index != 0xFFFFFFFFL)) {
do {
- if (aac_intr_normal(dev, Index)) {
+ if (unlikely(aac_intr_normal(dev, Index))) {
rx_writel(dev, MUnit.OutboundQueue, Index);
rx_writel(dev, MUnit.ODR, DoorBellAdapterNormRespReady);
}
@@ -204,7 +204,7 @@ static int rx_sync_cmd(struct aac_dev *dev, u32 command,
*/
msleep(1);
}
- if (ok != 1) {
+ if (unlikely(ok != 1)) {
/*
* Restore interrupt mask even though we timed out
*/
@@ -294,7 +294,7 @@ static void aac_rx_notify_adapter(struct aac_dev *dev, u32 event)
* Start up processing on an i960 based AAC adapter
*/
-void aac_rx_start_adapter(struct aac_dev *dev)
+static void aac_rx_start_adapter(struct aac_dev *dev)
{
struct aac_init *init;
@@ -319,12 +319,12 @@ static int aac_rx_check_health(struct aac_dev *dev)
/*
* Check to see if the board failed any self tests.
*/
- if (status & SELF_TEST_FAILED)
+ if (unlikely(status & SELF_TEST_FAILED))
return -1;
/*
* Check to see if the board panic'd.
*/
- if (status & KERNEL_PANIC) {
+ if (unlikely(status & KERNEL_PANIC)) {
char * buffer;
struct POSTSTATUS {
__le32 Post_Command;
@@ -333,15 +333,15 @@ static int aac_rx_check_health(struct aac_dev *dev)
dma_addr_t paddr, baddr;
int ret;
- if ((status & 0xFF000000L) == 0xBC000000L)
+ if (likely((status & 0xFF000000L) == 0xBC000000L))
return (status >> 16) & 0xFF;
buffer = pci_alloc_consistent(dev->pdev, 512, &baddr);
ret = -2;
- if (buffer == NULL)
+ if (unlikely(buffer == NULL))
return ret;
post = pci_alloc_consistent(dev->pdev,
sizeof(struct POSTSTATUS), &paddr);
- if (post == NULL) {
+ if (unlikely(post == NULL)) {
pci_free_consistent(dev->pdev, 512, buffer, baddr);
return ret;
}
@@ -353,7 +353,7 @@ static int aac_rx_check_health(struct aac_dev *dev)
NULL, NULL, NULL, NULL, NULL);
pci_free_consistent(dev->pdev, sizeof(struct POSTSTATUS),
post, paddr);
- if ((buffer[0] == '0') && ((buffer[1] == 'x') || (buffer[1] == 'X'))) {
+ if (likely((buffer[0] == '0') && ((buffer[1] == 'x') || (buffer[1] == 'X')))) {
ret = (buffer[2] <= '9') ? (buffer[2] - '0') : (buffer[2] - 'A' + 10);
ret <<= 4;
ret += (buffer[3] <= '9') ? (buffer[3] - '0') : (buffer[3] - 'A' + 10);
@@ -364,7 +364,7 @@ static int aac_rx_check_health(struct aac_dev *dev)
/*
* Wait for the adapter to be up and running.
*/
- if (!(status & KERNEL_UP_AND_RUNNING))
+ if (unlikely(!(status & KERNEL_UP_AND_RUNNING)))
return -3;
/*
* Everything is OK
@@ -387,7 +387,7 @@ static int aac_rx_deliver_producer(struct fib * fib)
unsigned long nointr = 0;
spin_lock_irqsave(q->lock, qflags);
- aac_queue_get( dev, &Index, AdapNormCmdQueue, fib->hw_fib, 1, fib, &nointr);
+ aac_queue_get( dev, &Index, AdapNormCmdQueue, fib->hw_fib_va, 1, fib, &nointr);
q->numpending++;
*(q->headers.producer) = cpu_to_le32(Index + 1);
@@ -419,9 +419,9 @@ static int aac_rx_deliver_message(struct fib * fib)
spin_unlock_irqrestore(q->lock, qflags);
for(;;) {
Index = rx_readl(dev, MUnit.InboundQueue);
- if (Index == 0xFFFFFFFFL)
+ if (unlikely(Index == 0xFFFFFFFFL))
Index = rx_readl(dev, MUnit.InboundQueue);
- if (Index != 0xFFFFFFFFL)
+ if (likely(Index != 0xFFFFFFFFL))
break;
if (--count == 0) {
spin_lock_irqsave(q->lock, qflags);
@@ -437,7 +437,7 @@ static int aac_rx_deliver_message(struct fib * fib)
device += sizeof(u32);
writel((u32)(addr >> 32), device);
device += sizeof(u32);
- writel(le16_to_cpu(fib->hw_fib->header.Size), device);
+ writel(le16_to_cpu(fib->hw_fib_va->header.Size), device);
rx_writel(dev, MUnit.InboundQueue, Index);
return 0;
}
@@ -460,22 +460,34 @@ static int aac_rx_ioremap(struct aac_dev * dev, u32 size)
return 0;
}
-static int aac_rx_restart_adapter(struct aac_dev *dev)
+static int aac_rx_restart_adapter(struct aac_dev *dev, int bled)
{
u32 var;
- printk(KERN_ERR "%s%d: adapter kernel panic'd.\n",
- dev->name, dev->id);
-
- if (aac_rx_check_health(dev) <= 0)
- return 1;
- if (rx_sync_cmd(dev, IOP_RESET, 0, 0, 0, 0, 0, 0,
- &var, NULL, NULL, NULL, NULL))
- return 1;
+ if (bled)
+ printk(KERN_ERR "%s%d: adapter kernel panic'd %x.\n",
+ dev->name, dev->id, bled);
+ else {
+ bled = aac_adapter_sync_cmd(dev, IOP_RESET_ALWAYS,
+ 0, 0, 0, 0, 0, 0, &var, NULL, NULL, NULL, NULL);
+ if (!bled && (var != 0x00000001))
+ bled = -EINVAL;
+ }
+ if (bled && (bled != -ETIMEDOUT))
+ bled = aac_adapter_sync_cmd(dev, IOP_RESET,
+ 0, 0, 0, 0, 0, 0, &var, NULL, NULL, NULL, NULL);
+
+ if (bled && (bled != -ETIMEDOUT))
+ return -EINVAL;
+ if (bled || (var == 0x3803000F)) { /* USE_OTHER_METHOD */
+ rx_writel(dev, MUnit.reserved2, 3);
+ msleep(5000); /* Delay 5 seconds */
+ var = 0x00000001;
+ }
if (var != 0x00000001)
- return 1;
+ return -EINVAL;
if (rx_readl(dev, MUnit.OMRx[0]) & KERNEL_PANIC)
- return 1;
+ return -ENODEV;
return 0;
}
@@ -517,24 +529,29 @@ int _aac_rx_init(struct aac_dev *dev)
{
unsigned long start;
unsigned long status;
- int instance;
- const char * name;
-
- instance = dev->id;
- name = dev->name;
+ int restart = 0;
+ int instance = dev->id;
+ const char * name = dev->name;
if (aac_adapter_ioremap(dev, dev->base_size)) {
printk(KERN_WARNING "%s: unable to map adapter.\n", name);
goto error_iounmap;
}
+ /* Failure to reset here is an option ... */
+ dev->OIMR = status = rx_readb (dev, MUnit.OIMR);
+ if ((((status & 0xff) != 0xff) || reset_devices) &&
+ !aac_rx_restart_adapter(dev, 0))
+ ++restart;
/*
* Check to see if the board panic'd while booting.
*/
status = rx_readl(dev, MUnit.OMRx[0]);
- if (status & KERNEL_PANIC)
- if (aac_rx_restart_adapter(dev))
+ if (status & KERNEL_PANIC) {
+ if (aac_rx_restart_adapter(dev, aac_rx_check_health(dev)))
goto error_iounmap;
+ ++restart;
+ }
/*
* Check to see if the board failed any self tests.
*/
@@ -556,12 +573,23 @@ int _aac_rx_init(struct aac_dev *dev)
*/
while (!((status = rx_readl(dev, MUnit.OMRx[0])) & KERNEL_UP_AND_RUNNING))
{
- if(time_after(jiffies, start+startup_timeout*HZ))
- {
+ if ((restart &&
+ (status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC))) ||
+ time_after(jiffies, start+HZ*startup_timeout)) {
printk(KERN_ERR "%s%d: adapter kernel failed to start, init status = %lx.\n",
dev->name, instance, status);
goto error_iounmap;
}
+ if (!restart &&
+ ((status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC)) ||
+ time_after(jiffies, start + HZ *
+ ((startup_timeout > 60)
+ ? (startup_timeout - 60)
+ : (startup_timeout / 2))))) {
+ if (likely(!aac_rx_restart_adapter(dev, aac_rx_check_health(dev))))
+ start = jiffies;
+ ++restart;
+ }
msleep(1);
}
/*
@@ -572,6 +600,7 @@ int _aac_rx_init(struct aac_dev *dev)
dev->a_ops.adapter_notify = aac_rx_notify_adapter;
dev->a_ops.adapter_sync_cmd = rx_sync_cmd;
dev->a_ops.adapter_check_health = aac_rx_check_health;
+ dev->a_ops.adapter_restart = aac_rx_restart_adapter;
/*
* First clear out all interrupts. Then enable the one's that we
diff --git a/drivers/scsi/aic7xxx/Kconfig.aic79xx b/drivers/scsi/aic7xxx/Kconfig.aic79xx
index 911ea1756e5..5e6620f8dab 100644
--- a/drivers/scsi/aic7xxx/Kconfig.aic79xx
+++ b/drivers/scsi/aic7xxx/Kconfig.aic79xx
@@ -57,18 +57,6 @@ config AIC79XX_BUILD_FIRMWARE
or modify the assembler Makefile or the files it includes if your
build environment is different than that of the author.
-config AIC79XX_ENABLE_RD_STRM
- bool "Enable Read Streaming for All Targets"
- depends on SCSI_AIC79XX
- default n
- help
- Read Streaming is a U320 protocol option that should enhance
- performance. Early U320 drive firmware actually performs slower
- with read streaming enabled so it is disabled by default. Read
- Streaming can be configured in much the same way as tagged queueing
- using the "rd_strm" command line option. See
- drivers/scsi/aic7xxx/README.aic79xx for details.
-
config AIC79XX_DEBUG_ENABLE
bool "Compile in Debugging Code"
depends on SCSI_AIC79XX
diff --git a/drivers/scsi/aic7xxx/Kconfig.aic7xxx b/drivers/scsi/aic7xxx/Kconfig.aic7xxx
index cd93f9a8611..88da670a791 100644
--- a/drivers/scsi/aic7xxx/Kconfig.aic7xxx
+++ b/drivers/scsi/aic7xxx/Kconfig.aic7xxx
@@ -50,16 +50,6 @@ config AIC7XXX_RESET_DELAY_MS
Default: 5000 (5 seconds)
-config AIC7XXX_PROBE_EISA_VL
- bool "Probe for EISA and VL AIC7XXX Adapters"
- depends on SCSI_AIC7XXX && EISA
- help
- Probe for EISA and VLB Aic7xxx controllers. In many newer systems,
- the invasive probes necessary to detect these controllers can cause
- other devices to fail. For this reason, the non-PCI probe code is
- disabled by default. The current value of this option can be "toggled"
- via the no_probe kernel command line option.
-
config AIC7XXX_BUILD_FIRMWARE
bool "Build Adapter Firmware with Kernel Build"
depends on SCSI_AIC7XXX && !PREVENT_FIRMWARE_BUILD
diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c
index 2be03e975d9..6054881f21f 100644
--- a/drivers/scsi/aic7xxx/aic79xx_osm.c
+++ b/drivers/scsi/aic7xxx/aic79xx_osm.c
@@ -363,6 +363,8 @@ static int ahd_linux_run_command(struct ahd_softc*,
struct scsi_cmnd *);
static void ahd_linux_setup_tag_info_global(char *p);
static int aic79xx_setup(char *c);
+static void ahd_freeze_simq(struct ahd_softc *ahd);
+static void ahd_release_simq(struct ahd_softc *ahd);
static int ahd_linux_unit;
@@ -2016,13 +2018,13 @@ ahd_linux_queue_cmd_complete(struct ahd_softc *ahd, struct scsi_cmnd *cmd)
cmd->scsi_done(cmd);
}
-void
+static void
ahd_freeze_simq(struct ahd_softc *ahd)
{
scsi_block_requests(ahd->platform_data->host);
}
-void
+static void
ahd_release_simq(struct ahd_softc *ahd)
{
scsi_unblock_requests(ahd->platform_data->host);
diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.h b/drivers/scsi/aic7xxx/aic79xx_osm.h
index 147c83c456a..9218f29314f 100644
--- a/drivers/scsi/aic7xxx/aic79xx_osm.h
+++ b/drivers/scsi/aic7xxx/aic79xx_osm.h
@@ -837,8 +837,6 @@ int ahd_platform_alloc(struct ahd_softc *ahd, void *platform_arg);
void ahd_platform_free(struct ahd_softc *ahd);
void ahd_platform_init(struct ahd_softc *ahd);
void ahd_platform_freeze_devq(struct ahd_softc *ahd, struct scb *scb);
-void ahd_freeze_simq(struct ahd_softc *ahd);
-void ahd_release_simq(struct ahd_softc *ahd);
static __inline void
ahd_freeze_scb(struct scb *scb)
diff --git a/drivers/scsi/aic7xxx/aic7xxx.h b/drivers/scsi/aic7xxx/aic7xxx.h
index 954c7c24501..e1bd57b9f23 100644
--- a/drivers/scsi/aic7xxx/aic7xxx.h
+++ b/drivers/scsi/aic7xxx/aic7xxx.h
@@ -1278,11 +1278,6 @@ typedef enum {
AHC_QUEUE_TAGGED
} ahc_queue_alg;
-void ahc_set_tags(struct ahc_softc *ahc,
- struct scsi_cmnd *cmd,
- struct ahc_devinfo *devinfo,
- ahc_queue_alg alg);
-
/**************************** Target Mode *************************************/
#ifdef AHC_TARGET_MODE
void ahc_send_lstate_events(struct ahc_softc *,
diff --git a/drivers/scsi/aic7xxx/aic7xxx_core.c b/drivers/scsi/aic7xxx/aic7xxx_core.c
index 50ef785224d..75733b09f27 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_core.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_core.c
@@ -2073,7 +2073,7 @@ ahc_set_width(struct ahc_softc *ahc, struct ahc_devinfo *devinfo,
/*
* Update the current state of tagged queuing for a given target.
*/
-void
+static void
ahc_set_tags(struct ahc_softc *ahc, struct scsi_cmnd *cmd,
struct ahc_devinfo *devinfo, ahc_queue_alg alg)
{
diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c
index 61f6024b61b..2a458d66b6f 100644
--- a/drivers/scsi/constants.c
+++ b/drivers/scsi/constants.c
@@ -202,31 +202,29 @@ static const char * get_sa_name(const struct value_name_pair * arr,
}
/* attempt to guess cdb length if cdb_len==0 . No trailing linefeed. */
-static void print_opcode_name(unsigned char * cdbp, int cdb_len,
- int start_of_line)
+static void print_opcode_name(unsigned char * cdbp, int cdb_len)
{
int sa, len, cdb0;
const char * name;
- const char * leadin = start_of_line ? KERN_INFO : "";
cdb0 = cdbp[0];
switch(cdb0) {
case VARIABLE_LENGTH_CMD:
len = cdbp[7] + 8;
if (len < 10) {
- printk("%sshort variable length command, "
- "len=%d ext_len=%d", leadin, len, cdb_len);
+ printk("short variable length command, "
+ "len=%d ext_len=%d", len, cdb_len);
break;
}
sa = (cdbp[8] << 8) + cdbp[9];
name = get_sa_name(maint_in_arr, MAINT_IN_SZ, sa);
if (name) {
- printk("%s%s", leadin, name);
+ printk("%s", name);
if ((cdb_len > 0) && (len != cdb_len))
printk(", in_cdb_len=%d, ext_len=%d",
len, cdb_len);
} else {
- printk("%scdb[0]=0x%x, sa=0x%x", leadin, cdb0, sa);
+ printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
if ((cdb_len > 0) && (len != cdb_len))
printk(", in_cdb_len=%d, ext_len=%d",
len, cdb_len);
@@ -236,83 +234,80 @@ static void print_opcode_name(unsigned char * cdbp, int cdb_len,
sa = cdbp[1] & 0x1f;
name = get_sa_name(maint_in_arr, MAINT_IN_SZ, sa);
if (name)
- printk("%s%s", leadin, name);
+ printk("%s", name);
else
- printk("%scdb[0]=0x%x, sa=0x%x", leadin, cdb0, sa);
+ printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
break;
case MAINTENANCE_OUT:
sa = cdbp[1] & 0x1f;
name = get_sa_name(maint_out_arr, MAINT_OUT_SZ, sa);
if (name)
- printk("%s%s", leadin, name);
+ printk("%s", name);
else
- printk("%scdb[0]=0x%x, sa=0x%x", leadin, cdb0, sa);
+ printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
break;
case SERVICE_ACTION_IN_12:
sa = cdbp[1] & 0x1f;
name = get_sa_name(serv_in12_arr, SERV_IN12_SZ, sa);
if (name)
- printk("%s%s", leadin, name);
+ printk("%s", name);
else
- printk("%scdb[0]=0x%x, sa=0x%x", leadin, cdb0, sa);
+ printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
break;
case SERVICE_ACTION_OUT_12:
sa = cdbp[1] & 0x1f;
name = get_sa_name(serv_out12_arr, SERV_OUT12_SZ, sa);
if (name)
- printk("%s%s", leadin, name);
+ printk("%s", name);
else
- printk("%scdb[0]=0x%x, sa=0x%x", leadin, cdb0, sa);
+ printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
break;
case SERVICE_ACTION_IN_16:
sa = cdbp[1] & 0x1f;
name = get_sa_name(serv_in16_arr, SERV_IN16_SZ, sa);
if (name)
- printk("%s%s", leadin, name);
+ printk("%s", name);
else
- printk("%scdb[0]=0x%x, sa=0x%x", leadin, cdb0, sa);
+ printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
break;
case SERVICE_ACTION_OUT_16:
sa = cdbp[1] & 0x1f;
name = get_sa_name(serv_out16_arr, SERV_OUT16_SZ, sa);
if (name)
- printk("%s%s", leadin, name);
+ printk("%s", name);
else
- printk("%scdb[0]=0x%x, sa=0x%x", leadin, cdb0, sa);
+ printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
break;
default:
if (cdb0 < 0xc0) {
name = cdb_byte0_names[cdb0];
if (name)
- printk("%s%s", leadin, name);
+ printk("%s", name);
else
- printk("%scdb[0]=0x%x (reserved)",
- leadin, cdb0);
+ printk("cdb[0]=0x%x (reserved)", cdb0);
} else
- printk("%scdb[0]=0x%x (vendor)", leadin, cdb0);
+ printk("cdb[0]=0x%x (vendor)", cdb0);
break;
}
}
#else /* ifndef CONFIG_SCSI_CONSTANTS */
-static void print_opcode_name(unsigned char * cdbp, int cdb_len,
- int start_of_line)
+static void print_opcode_name(unsigned char * cdbp, int cdb_len)
{
int sa, len, cdb0;
- const char * leadin = start_of_line ? KERN_INFO : "";
cdb0 = cdbp[0];
switch(cdb0) {
case VARIABLE_LENGTH_CMD:
len = cdbp[7] + 8;
if (len < 10) {
- printk("%sshort opcode=0x%x command, len=%d "
- "ext_len=%d", leadin, cdb0, len, cdb_len);
+ printk("short opcode=0x%x command, len=%d "
+ "ext_len=%d", cdb0, len, cdb_len);
break;
}
sa = (cdbp[8] << 8) + cdbp[9];
- printk("%scdb[0]=0x%x, sa=0x%x", leadin, cdb0, sa);
+ printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
if (len != cdb_len)
printk(", in_cdb_len=%d, ext_len=%d", len, cdb_len);
break;
@@ -323,49 +318,48 @@ static void print_opcode_name(unsigned char * cdbp, int cdb_len,
case SERVICE_ACTION_IN_16:
case SERVICE_ACTION_OUT_16:
sa = cdbp[1] & 0x1f;
- printk("%scdb[0]=0x%x, sa=0x%x", leadin, cdb0, sa);
+ printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
break;
default:
if (cdb0 < 0xc0)
- printk("%scdb[0]=0x%x", leadin, cdb0);
+ printk("cdb[0]=0x%x", cdb0);
else
- printk("%scdb[0]=0x%x (vendor)", leadin, cdb0);
+ printk("cdb[0]=0x%x (vendor)", cdb0);
break;
}
}
#endif
-void __scsi_print_command(unsigned char *command)
+void __scsi_print_command(unsigned char *cdb)
{
int k, len;
- print_opcode_name(command, 0, 1);
- if (VARIABLE_LENGTH_CMD == command[0])
- len = command[7] + 8;
+ print_opcode_name(cdb, 0);
+ if (VARIABLE_LENGTH_CMD == cdb[0])
+ len = cdb[7] + 8;
else
- len = COMMAND_SIZE(command[0]);
+ len = COMMAND_SIZE(cdb[0]);
/* print out all bytes in cdb */
for (k = 0; k < len; ++k)
- printk(" %02x", command[k]);
+ printk(" %02x", cdb[k]);
printk("\n");
}
EXPORT_SYMBOL(__scsi_print_command);
-/* This function (perhaps with the addition of peripheral device type)
- * is more approriate than __scsi_print_command(). Perhaps that static
- * can be dropped later if it replaces the __scsi_print_command version.
- */
-static void scsi_print_cdb(unsigned char *cdb, int cdb_len, int start_of_line)
+void scsi_print_command(struct scsi_cmnd *cmd)
{
int k;
- print_opcode_name(cdb, cdb_len, start_of_line);
+ scmd_printk(KERN_INFO, cmd, "CDB: ");
+ print_opcode_name(cmd->cmnd, cmd->cmd_len);
+
/* print out all bytes in cdb */
printk(":");
- for (k = 0; k < cdb_len; ++k)
- printk(" %02x", cdb[k]);
+ for (k = 0; k < cmd->cmd_len; ++k)
+ printk(" %02x", cmd->cmnd[k]);
printk("\n");
}
+EXPORT_SYMBOL(scsi_print_command);
/**
*
@@ -410,7 +404,11 @@ struct error_info {
const char * text;
};
-static struct error_info additional[] =
+/*
+ * The canonical list of T10 Additional Sense Codes is available at:
+ * http://www.t10.org/lists/asc-num.txt
+ */
+static const struct error_info additional[] =
{
{0x0000, "No additional sense information"},
{0x0001, "Filemark detected"},
@@ -714,6 +712,7 @@ static struct error_info additional[] =
{0x2F00, "Commands cleared by another initiator"},
{0x2F01, "Commands cleared by power loss notification"},
+ {0x2F02, "Commands cleared by device server"},
{0x3000, "Incompatible medium installed"},
{0x3001, "Cannot read medium - unknown format"},
@@ -1176,67 +1175,77 @@ scsi_extd_sense_format(unsigned char asc, unsigned char ascq) {
}
EXPORT_SYMBOL(scsi_extd_sense_format);
-/* Print extended sense information; no leadin, no linefeed */
-static void
+void
scsi_show_extd_sense(unsigned char asc, unsigned char ascq)
{
- const char *extd_sense_fmt = scsi_extd_sense_format(asc, ascq);
+ const char *extd_sense_fmt = scsi_extd_sense_format(asc, ascq);
if (extd_sense_fmt) {
if (strstr(extd_sense_fmt, "%x")) {
- printk("Additional sense: ");
+ printk("Add. Sense: ");
printk(extd_sense_fmt, ascq);
} else
- printk("Additional sense: %s", extd_sense_fmt);
+ printk("Add. Sense: %s", extd_sense_fmt);
} else {
if (asc >= 0x80)
- printk("<<vendor>> ASC=0x%x ASCQ=0x%x", asc, ascq);
+ printk("<<vendor>> ASC=0x%x ASCQ=0x%x", asc,
+ ascq);
if (ascq >= 0x80)
- printk("ASC=0x%x <<vendor>> ASCQ=0x%x", asc, ascq);
+ printk("ASC=0x%x <<vendor>> ASCQ=0x%x", asc,
+ ascq);
else
printk("ASC=0x%x ASCQ=0x%x", asc, ascq);
}
+
+ printk("\n");
}
+EXPORT_SYMBOL(scsi_show_extd_sense);
void
-scsi_print_sense_hdr(const char *name, struct scsi_sense_hdr *sshdr)
+scsi_show_sense_hdr(struct scsi_sense_hdr *sshdr)
{
const char *sense_txt;
- /* An example of deferred is when an earlier write to disk cache
- * succeeded, but now the disk discovers that it cannot write the
- * data to the magnetic media.
- */
- const char *error = scsi_sense_is_deferred(sshdr) ?
- "<<DEFERRED>>" : "Current";
- printk(KERN_INFO "%s: %s", name, error);
- if (sshdr->response_code >= 0x72)
- printk(" [descriptor]");
sense_txt = scsi_sense_key_string(sshdr->sense_key);
if (sense_txt)
- printk(": sense key: %s\n", sense_txt);
+ printk("Sense Key : %s ", sense_txt);
else
- printk(": sense key=0x%x\n", sshdr->sense_key);
- printk(KERN_INFO " ");
- scsi_show_extd_sense(sshdr->asc, sshdr->ascq);
+ printk("Sense Key : 0x%x ", sshdr->sense_key);
+
+ printk("%s", scsi_sense_is_deferred(sshdr) ? "[deferred] " :
+ "[current] ");
+
+ if (sshdr->response_code >= 0x72)
+ printk("[descriptor]");
+
printk("\n");
}
+EXPORT_SYMBOL(scsi_show_sense_hdr);
+
+/*
+ * Print normalized SCSI sense header with a prefix.
+ */
+void
+scsi_print_sense_hdr(const char *name, struct scsi_sense_hdr *sshdr)
+{
+ printk(KERN_INFO "%s: ", name);
+ scsi_show_sense_hdr(sshdr);
+ printk(KERN_INFO "%s: ", name);
+ scsi_show_extd_sense(sshdr->asc, sshdr->ascq);
+}
EXPORT_SYMBOL(scsi_print_sense_hdr);
-/* Print sense information */
void
-__scsi_print_sense(const char *name, const unsigned char *sense_buffer,
- int sense_len)
+scsi_decode_sense_buffer(const unsigned char *sense_buffer, int sense_len,
+ struct scsi_sense_hdr *sshdr)
{
int k, num, res;
- unsigned int info;
- struct scsi_sense_hdr ssh;
- res = scsi_normalize_sense(sense_buffer, sense_len, &ssh);
+ res = scsi_normalize_sense(sense_buffer, sense_len, sshdr);
if (0 == res) {
/* this may be SCSI-1 sense data */
num = (sense_len < 32) ? sense_len : 32;
- printk(KERN_INFO "Unrecognized sense data (in hex):");
+ printk("Unrecognized sense data (in hex):");
for (k = 0; k < num; ++k) {
if (0 == (k % 16)) {
printk("\n");
@@ -1247,11 +1256,20 @@ __scsi_print_sense(const char *name, const unsigned char *sense_buffer,
printk("\n");
return;
}
- scsi_print_sense_hdr(name, &ssh);
- if (ssh.response_code < 0x72) {
+}
+
+void
+scsi_decode_sense_extras(const unsigned char *sense_buffer, int sense_len,
+ struct scsi_sense_hdr *sshdr)
+{
+ int k, num, res;
+
+ if (sshdr->response_code < 0x72)
+ {
/* only decode extras for "fixed" format now */
char buff[80];
int blen, fixed_valid;
+ unsigned int info;
fixed_valid = sense_buffer[0] & 0x80;
info = ((sense_buffer[3] << 24) | (sense_buffer[4] << 16) |
@@ -1281,13 +1299,13 @@ __scsi_print_sense(const char *name, const unsigned char *sense_buffer,
res += snprintf(buff + res, blen - res, "ILI");
}
if (res > 0)
- printk(KERN_INFO "%s\n", buff);
- } else if (ssh.additional_length > 0) {
+ printk("%s\n", buff);
+ } else if (sshdr->additional_length > 0) {
/* descriptor format with sense descriptors */
- num = 8 + ssh.additional_length;
+ num = 8 + sshdr->additional_length;
num = (sense_len < num) ? sense_len : num;
- printk(KERN_INFO "Descriptor sense data with sense "
- "descriptors (in hex):");
+ printk("Descriptor sense data with sense descriptors "
+ "(in hex):");
for (k = 0; k < num; ++k) {
if (0 == (k % 16)) {
printk("\n");
@@ -1295,29 +1313,42 @@ __scsi_print_sense(const char *name, const unsigned char *sense_buffer,
}
printk("%02x ", sense_buffer[k]);
}
+
printk("\n");
}
+
}
-EXPORT_SYMBOL(__scsi_print_sense);
-void scsi_print_sense(const char *devclass, struct scsi_cmnd *cmd)
+/* Normalize and print sense buffer with name prefix */
+void __scsi_print_sense(const char *name, const unsigned char *sense_buffer,
+ int sense_len)
{
- const char *name = devclass;
-
- if (cmd->request->rq_disk)
- name = cmd->request->rq_disk->disk_name;
- __scsi_print_sense(name, cmd->sense_buffer, SCSI_SENSE_BUFFERSIZE);
+ struct scsi_sense_hdr sshdr;
+
+ printk(KERN_INFO "%s: ", name);
+ scsi_decode_sense_buffer(sense_buffer, sense_len, &sshdr);
+ scsi_show_sense_hdr(&sshdr);
+ scsi_decode_sense_extras(sense_buffer, sense_len, &sshdr);
+ printk(KERN_INFO "%s: ", name);
+ scsi_show_extd_sense(sshdr.asc, sshdr.ascq);
}
-EXPORT_SYMBOL(scsi_print_sense);
+EXPORT_SYMBOL(__scsi_print_sense);
-void scsi_print_command(struct scsi_cmnd *cmd)
+/* Normalize and print sense buffer in SCSI command */
+void scsi_print_sense(char *name, struct scsi_cmnd *cmd)
{
- /* Assume appended output (i.e. not at start of line) */
- sdev_printk("", cmd->device, "\n");
- printk(KERN_INFO " command: ");
- scsi_print_cdb(cmd->cmnd, cmd->cmd_len, 0);
+ struct scsi_sense_hdr sshdr;
+
+ scmd_printk(KERN_INFO, cmd, "");
+ scsi_decode_sense_buffer(cmd->sense_buffer, SCSI_SENSE_BUFFERSIZE,
+ &sshdr);
+ scsi_show_sense_hdr(&sshdr);
+ scsi_decode_sense_extras(cmd->sense_buffer, SCSI_SENSE_BUFFERSIZE,
+ &sshdr);
+ scmd_printk(KERN_INFO, cmd, "");
+ scsi_show_extd_sense(sshdr.asc, sshdr.ascq);
}
-EXPORT_SYMBOL(scsi_print_command);
+EXPORT_SYMBOL(scsi_print_sense);
#ifdef CONFIG_SCSI_CONSTANTS
@@ -1327,25 +1358,6 @@ static const char * const hostbyte_table[]={
"DID_PASSTHROUGH", "DID_SOFT_ERROR", "DID_IMM_RETRY"};
#define NUM_HOSTBYTE_STRS ARRAY_SIZE(hostbyte_table)
-void scsi_print_hostbyte(int scsiresult)
-{
- int hb = host_byte(scsiresult);
-
- printk("Hostbyte=0x%02x", hb);
- if (hb < NUM_HOSTBYTE_STRS)
- printk("(%s) ", hostbyte_table[hb]);
- else
- printk("is invalid ");
-}
-#else
-void scsi_print_hostbyte(int scsiresult)
-{
- printk("Hostbyte=0x%02x ", host_byte(scsiresult));
-}
-#endif
-
-#ifdef CONFIG_SCSI_CONSTANTS
-
static const char * const driverbyte_table[]={
"DRIVER_OK", "DRIVER_BUSY", "DRIVER_SOFT", "DRIVER_MEDIA", "DRIVER_ERROR",
"DRIVER_INVALID", "DRIVER_TIMEOUT", "DRIVER_HARD", "DRIVER_SENSE"};
@@ -1356,19 +1368,35 @@ static const char * const driversuggest_table[]={"SUGGEST_OK",
"SUGGEST_5", "SUGGEST_6", "SUGGEST_7", "SUGGEST_SENSE"};
#define NUM_SUGGEST_STRS ARRAY_SIZE(driversuggest_table)
-void scsi_print_driverbyte(int scsiresult)
+void scsi_show_result(int result)
{
- int dr = (driver_byte(scsiresult) & DRIVER_MASK);
- int su = ((driver_byte(scsiresult) & SUGGEST_MASK) >> 4);
+ int hb = host_byte(result);
+ int db = (driver_byte(result) & DRIVER_MASK);
+ int su = ((driver_byte(result) & SUGGEST_MASK) >> 4);
- printk("Driverbyte=0x%02x ", driver_byte(scsiresult));
- printk("(%s,%s) ",
- (dr < NUM_DRIVERBYTE_STRS ? driverbyte_table[dr] : "invalid"),
+ printk("Result: hostbyte=%s driverbyte=%s,%s\n",
+ (hb < NUM_HOSTBYTE_STRS ? hostbyte_table[hb] : "invalid"),
+ (db < NUM_DRIVERBYTE_STRS ? driverbyte_table[db] : "invalid"),
(su < NUM_SUGGEST_STRS ? driversuggest_table[su] : "invalid"));
}
+
#else
-void scsi_print_driverbyte(int scsiresult)
+
+void scsi_show_result(int result)
{
- printk("Driverbyte=0x%02x ", driver_byte(scsiresult));
+ printk("Result: hostbyte=0x%02x driverbyte=0x%02x\n",
+ host_byte(result), driver_byte(result));
}
+
#endif
+EXPORT_SYMBOL(scsi_show_result);
+
+
+void scsi_print_result(struct scsi_cmnd *cmd)
+{
+ scmd_printk(KERN_INFO, cmd, "");
+ scsi_show_result(cmd->result);
+}
+EXPORT_SYMBOL(scsi_print_result);
+
+
diff --git a/drivers/scsi/dpt/dpti_i2o.h b/drivers/scsi/dpt/dpti_i2o.h
index 5a49216fe4c..100b49baca7 100644
--- a/drivers/scsi/dpt/dpti_i2o.h
+++ b/drivers/scsi/dpt/dpti_i2o.h
@@ -31,7 +31,7 @@
* Tunable parameters first
*/
-/* How many different OSM's are we allowing */
+/* How many different OSM's are we allowing */
#define MAX_I2O_MODULES 64
#define I2O_EVT_CAPABILITY_OTHER 0x01
@@ -63,7 +63,7 @@ struct i2o_message
u16 size;
u32 target_tid:12;
u32 init_tid:12;
- u32 function:8;
+ u32 function:8;
u32 initiator_context;
/* List follows */
};
@@ -77,7 +77,7 @@ struct i2o_device
char dev_name[8]; /* linux /dev name if available */
i2o_lct_entry lct_data;/* Device LCT information */
- u32 flags;
+ u32 flags;
struct proc_dir_entry* proc_entry; /* /proc dir */
struct adpt_device *owner;
struct _adpt_hba *controller; /* Controlling IOP */
@@ -86,7 +86,7 @@ struct i2o_device
/*
* Each I2O controller has one of these objects
*/
-
+
struct i2o_controller
{
char name[16];
@@ -111,9 +111,9 @@ struct i2o_sys_tbl_entry
u32 iop_id:12;
u32 reserved2:20;
u16 seg_num:12;
- u16 i2o_version:4;
- u8 iop_state;
- u8 msg_type;
+ u16 i2o_version:4;
+ u8 iop_state;
+ u8 msg_type;
u16 frame_size;
u16 reserved3;
u32 last_changed;
@@ -124,14 +124,14 @@ struct i2o_sys_tbl_entry
struct i2o_sys_tbl
{
- u8 num_entries;
- u8 version;
- u16 reserved1;
+ u8 num_entries;
+ u8 version;
+ u16 reserved1;
u32 change_ind;
u32 reserved2;
u32 reserved3;
struct i2o_sys_tbl_entry iops[0];
-};
+};
/*
* I2O classes / subclasses
@@ -146,7 +146,7 @@ struct i2o_sys_tbl
/* Class code names
* (from v1.5 Table 6-1 Class Code Assignments.)
*/
-
+
#define I2O_CLASS_EXECUTIVE 0x000
#define I2O_CLASS_DDM 0x001
#define I2O_CLASS_RANDOM_BLOCK_STORAGE 0x010
@@ -166,7 +166,7 @@ struct i2o_sys_tbl
/* Rest of 0x092 - 0x09f reserved for peer-to-peer classes
*/
-
+
#define I2O_CLASS_MATCH_ANYCLASS 0xffffffff
/* Subclasses
@@ -175,7 +175,7 @@ struct i2o_sys_tbl
#define I2O_SUBCLASS_i960 0x001
#define I2O_SUBCLASS_HDM 0x020
#define I2O_SUBCLASS_ISM 0x021
-
+
/* Operation functions */
#define I2O_PARAMS_FIELD_GET 0x0001
@@ -219,7 +219,7 @@ struct i2o_sys_tbl
/*
* Messaging API values
*/
-
+
#define I2O_CMD_ADAPTER_ASSIGN 0xB3
#define I2O_CMD_ADAPTER_READ 0xB2
#define I2O_CMD_ADAPTER_RELEASE 0xB5
@@ -284,16 +284,16 @@ struct i2o_sys_tbl
#define I2O_PRIVATE_MSG 0xFF
/*
- * Init Outbound Q status
+ * Init Outbound Q status
*/
-
+
#define I2O_CMD_OUTBOUND_INIT_IN_PROGRESS 0x01
#define I2O_CMD_OUTBOUND_INIT_REJECTED 0x02
#define I2O_CMD_OUTBOUND_INIT_FAILED 0x03
#define I2O_CMD_OUTBOUND_INIT_COMPLETE 0x04
/*
- * I2O Get Status State values
+ * I2O Get Status State values
*/
#define ADAPTER_STATE_INITIALIZING 0x01
@@ -303,7 +303,7 @@ struct i2o_sys_tbl
#define ADAPTER_STATE_OPERATIONAL 0x08
#define ADAPTER_STATE_FAILED 0x10
#define ADAPTER_STATE_FAULTED 0x11
-
+
/* I2O API function return values */
#define I2O_RTN_NO_ERROR 0
@@ -321,9 +321,9 @@ struct i2o_sys_tbl
/* Reply message status defines for all messages */
-#define I2O_REPLY_STATUS_SUCCESS 0x00
-#define I2O_REPLY_STATUS_ABORT_DIRTY 0x01
-#define I2O_REPLY_STATUS_ABORT_NO_DATA_TRANSFER 0x02
+#define I2O_REPLY_STATUS_SUCCESS 0x00
+#define I2O_REPLY_STATUS_ABORT_DIRTY 0x01
+#define I2O_REPLY_STATUS_ABORT_NO_DATA_TRANSFER 0x02
#define I2O_REPLY_STATUS_ABORT_PARTIAL_TRANSFER 0x03
#define I2O_REPLY_STATUS_ERROR_DIRTY 0x04
#define I2O_REPLY_STATUS_ERROR_NO_DATA_TRANSFER 0x05
@@ -338,7 +338,7 @@ struct i2o_sys_tbl
#define I2O_PARAMS_STATUS_SUCCESS 0x00
#define I2O_PARAMS_STATUS_BAD_KEY_ABORT 0x01
-#define I2O_PARAMS_STATUS_BAD_KEY_CONTINUE 0x02
+#define I2O_PARAMS_STATUS_BAD_KEY_CONTINUE 0x02
#define I2O_PARAMS_STATUS_BUFFER_FULL 0x03
#define I2O_PARAMS_STATUS_BUFFER_TOO_SMALL 0x04
#define I2O_PARAMS_STATUS_FIELD_UNREADABLE 0x05
@@ -390,7 +390,7 @@ struct i2o_sys_tbl
#define I2O_CLAIM_MANAGEMENT 0x02000000
#define I2O_CLAIM_AUTHORIZED 0x03000000
#define I2O_CLAIM_SECONDARY 0x04000000
-
+
/* Message header defines for VersionOffset */
#define I2OVER15 0x0001
#define I2OVER20 0x0002
diff --git a/drivers/scsi/dpt/dpti_ioctl.h b/drivers/scsi/dpt/dpti_ioctl.h
index 82d24864be0..cc784e8f6e9 100644
--- a/drivers/scsi/dpt/dpti_ioctl.h
+++ b/drivers/scsi/dpt/dpti_ioctl.h
@@ -99,7 +99,7 @@ typedef struct {
uCHAR eataVersion; /* EATA Version */
uLONG cpLength; /* EATA Command Packet Length */
uLONG spLength; /* EATA Status Packet Length */
- uCHAR drqNum; /* DRQ Index (0,5,6,7) */
+ uCHAR drqNum; /* DRQ Index (0,5,6,7) */
uCHAR flag1; /* EATA Flags 1 (Byte 9) */
uCHAR flag2; /* EATA Flags 2 (Byte 30) */
} CtrlInfo;
diff --git a/drivers/scsi/dpt/dptsig.h b/drivers/scsi/dpt/dptsig.h
index 4bf44779212..94bc894d120 100644
--- a/drivers/scsi/dpt/dptsig.h
+++ b/drivers/scsi/dpt/dptsig.h
@@ -145,8 +145,8 @@ typedef unsigned long sigLONG;
#define FT_LOGGER 12 /* Event Logger */
#define FT_INSTALL 13 /* An Install Program */
#define FT_LIBRARY 14 /* Storage Manager Real-Mode Calls */
-#define FT_RESOURCE 15 /* Storage Manager Resource File */
-#define FT_MODEM_DB 16 /* Storage Manager Modem Database */
+#define FT_RESOURCE 15 /* Storage Manager Resource File */
+#define FT_MODEM_DB 16 /* Storage Manager Modem Database */
/* Filetype flags - sigBYTE dsFiletypeFlags; FLAG BITS */
/* ------------------------------------------------------------------ */
diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c
index cd36e81b2d9..f7b9dbd64a9 100644
--- a/drivers/scsi/dpt_i2o.c
+++ b/drivers/scsi/dpt_i2o.c
@@ -195,8 +195,6 @@ static int adpt_detect(struct scsi_host_template* sht)
pci_dev_get(pDev);
}
}
- if (pDev)
- pci_dev_put(pDev);
/* In INIT state, Activate IOPs */
for (pHba = hba_chain; pHba; pHba = pHba->next) {
diff --git a/drivers/scsi/eata_generic.h b/drivers/scsi/eata_generic.h
index 635c14861f8..5016af5cf86 100644
--- a/drivers/scsi/eata_generic.h
+++ b/drivers/scsi/eata_generic.h
@@ -18,13 +18,6 @@
* Misc. definitions *
*********************************************/
-#ifndef TRUE
-#define TRUE 1
-#endif
-#ifndef FALSE
-#define FALSE 0
-#endif
-
#define R_LIMIT 0x20000
#define MAXISA 4
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index fbc1d5c3b0a..b10eefe735c 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -85,7 +85,7 @@
static int max_id = 64;
static int max_channel = 3;
static int init_timeout = 5;
-static int max_requests = 50;
+static int max_requests = IBMVSCSI_MAX_REQUESTS_DEFAULT;
#define IBMVSCSI_VERSION "1.5.8"
@@ -538,7 +538,8 @@ static int ibmvscsi_send_srp_event(struct srp_event_struct *evt_struct,
int request_status;
int rc;
- /* If we have exhausted our request limit, just fail this request.
+ /* If we have exhausted our request limit, just fail this request,
+ * unless it is for a reset or abort.
* Note that there are rare cases involving driver generated requests
* (such as task management requests) that the mid layer may think we
* can handle more requests (can_queue) when we actually can't
@@ -551,9 +552,30 @@ static int ibmvscsi_send_srp_event(struct srp_event_struct *evt_struct,
*/
if (request_status < -1)
goto send_error;
- /* Otherwise, if we have run out of requests */
- else if (request_status < 0)
- goto send_busy;
+ /* Otherwise, we may have run out of requests. */
+ /* Abort and reset calls should make it through.
+ * Nothing except abort and reset should use the last two
+ * slots unless we had two or less to begin with.
+ */
+ else if (request_status < 2 &&
+ evt_struct->iu.srp.cmd.opcode != SRP_TSK_MGMT) {
+ /* In the case that we have less than two requests
+ * available, check the server limit as a combination
+ * of the request limit and the number of requests
+ * in-flight (the size of the send list). If the
+ * server limit is greater than 2, return busy so
+ * that the last two are reserved for reset and abort.
+ */
+ int server_limit = request_status;
+ struct srp_event_struct *tmp_evt;
+
+ list_for_each_entry(tmp_evt, &hostdata->sent, list) {
+ server_limit++;
+ }
+
+ if (server_limit > 2)
+ goto send_busy;
+ }
}
/* Copy the IU into the transfer area */
@@ -572,6 +594,7 @@ static int ibmvscsi_send_srp_event(struct srp_event_struct *evt_struct,
printk(KERN_ERR "ibmvscsi: send error %d\n",
rc);
+ atomic_inc(&hostdata->request_limit);
goto send_error;
}
@@ -581,7 +604,8 @@ static int ibmvscsi_send_srp_event(struct srp_event_struct *evt_struct,
unmap_cmd_data(&evt_struct->iu.srp.cmd, evt_struct, hostdata->dev);
free_event_struct(&hostdata->pool, evt_struct);
- return SCSI_MLQUEUE_HOST_BUSY;
+ atomic_inc(&hostdata->request_limit);
+ return SCSI_MLQUEUE_HOST_BUSY;
send_error:
unmap_cmd_data(&evt_struct->iu.srp.cmd, evt_struct, hostdata->dev);
@@ -831,23 +855,16 @@ static void login_rsp(struct srp_event_struct *evt_struct)
printk(KERN_INFO "ibmvscsi: SRP_LOGIN succeeded\n");
- if (evt_struct->xfer_iu->srp.login_rsp.req_lim_delta >
- (max_requests - 2))
- evt_struct->xfer_iu->srp.login_rsp.req_lim_delta =
- max_requests - 2;
+ if (evt_struct->xfer_iu->srp.login_rsp.req_lim_delta < 0)
+ printk(KERN_ERR "ibmvscsi: Invalid request_limit.\n");
- /* Now we know what the real request-limit is */
+ /* Now we know what the real request-limit is.
+ * This value is set rather than added to request_limit because
+ * request_limit could have been set to -1 by this client.
+ */
atomic_set(&hostdata->request_limit,
evt_struct->xfer_iu->srp.login_rsp.req_lim_delta);
- hostdata->host->can_queue =
- evt_struct->xfer_iu->srp.login_rsp.req_lim_delta - 2;
-
- if (hostdata->host->can_queue < 1) {
- printk(KERN_ERR "ibmvscsi: Invalid request_limit_delta\n");
- return;
- }
-
/* If we had any pending I/Os, kick them */
scsi_unblock_requests(hostdata->host);
@@ -1337,6 +1354,27 @@ static int ibmvscsi_do_host_config(struct ibmvscsi_host_data *hostdata,
return rc;
}
+/**
+ * ibmvscsi_slave_configure: Set the "allow_restart" flag for each disk.
+ * @sdev: struct scsi_device device to configure
+ *
+ * Enable allow_restart for a device if it is a disk. Adjust the
+ * queue_depth here also as is required by the documentation for
+ * struct scsi_host_template.
+ */
+static int ibmvscsi_slave_configure(struct scsi_device *sdev)
+{
+ struct Scsi_Host *shost = sdev->host;
+ unsigned long lock_flags = 0;
+
+ spin_lock_irqsave(shost->host_lock, lock_flags);
+ if (sdev->type == TYPE_DISK)
+ sdev->allow_restart = 1;
+ scsi_adjust_queue_depth(sdev, 0, shost->cmd_per_lun);
+ spin_unlock_irqrestore(shost->host_lock, lock_flags);
+ return 0;
+}
+
/* ------------------------------------------------------------
* sysfs attributes
*/
@@ -1482,8 +1520,9 @@ static struct scsi_host_template driver_template = {
.queuecommand = ibmvscsi_queuecommand,
.eh_abort_handler = ibmvscsi_eh_abort_handler,
.eh_device_reset_handler = ibmvscsi_eh_device_reset_handler,
+ .slave_configure = ibmvscsi_slave_configure,
.cmd_per_lun = 16,
- .can_queue = 1, /* Updated after SRP_LOGIN */
+ .can_queue = IBMVSCSI_MAX_REQUESTS_DEFAULT,
.this_id = -1,
.sg_tablesize = SG_ALL,
.use_clustering = ENABLE_CLUSTERING,
@@ -1503,6 +1542,7 @@ static int ibmvscsi_probe(struct vio_dev *vdev, const struct vio_device_id *id)
vdev->dev.driver_data = NULL;
+ driver_template.can_queue = max_requests;
host = scsi_host_alloc(&driver_template, sizeof(*hostdata));
if (!host) {
printk(KERN_ERR "ibmvscsi: couldn't allocate host data\n");
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.h b/drivers/scsi/ibmvscsi/ibmvscsi.h
index 5c6d9358292..77cc1d40f5b 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.h
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.h
@@ -44,6 +44,8 @@ struct Scsi_Host;
*/
#define MAX_INDIRECT_BUFS 10
+#define IBMVSCSI_MAX_REQUESTS_DEFAULT 100
+
/* ------------------------------------------------------------
* Data Structures
*/
diff --git a/drivers/scsi/ibmvscsi/ibmvstgt.c b/drivers/scsi/ibmvscsi/ibmvstgt.c
index a39a478bb39..6d223dd7644 100644
--- a/drivers/scsi/ibmvscsi/ibmvstgt.c
+++ b/drivers/scsi/ibmvscsi/ibmvstgt.c
@@ -35,7 +35,7 @@
#include "ibmvscsi.h"
#define INITIAL_SRP_LIMIT 16
-#define DEFAULT_MAX_SECTORS 512
+#define DEFAULT_MAX_SECTORS 256
#define TGT_NAME "ibmvstgt"
@@ -248,8 +248,8 @@ static int ibmvstgt_rdma(struct scsi_cmnd *sc, struct scatterlist *sg, int nsg,
md[i].va + mdone);
if (err != H_SUCCESS) {
- eprintk("rdma error %d %d\n", dir, slen);
- goto out;
+ eprintk("rdma error %d %d %ld\n", dir, slen, err);
+ return -EIO;
}
mlen -= slen;
@@ -265,45 +265,35 @@ static int ibmvstgt_rdma(struct scsi_cmnd *sc, struct scatterlist *sg, int nsg,
if (sidx > nsg) {
eprintk("out of sg %p %d %d\n",
iue, sidx, nsg);
- goto out;
+ return -EIO;
}
}
};
rest -= mlen;
}
-out:
-
return 0;
}
-static int ibmvstgt_transfer_data(struct scsi_cmnd *sc,
- void (*done)(struct scsi_cmnd *))
-{
- struct iu_entry *iue = (struct iu_entry *) sc->SCp.ptr;
- int err;
-
- err = srp_transfer_data(sc, &vio_iu(iue)->srp.cmd, ibmvstgt_rdma, 1, 1);
-
- done(sc);
-
- return err;
-}
-
static int ibmvstgt_cmd_done(struct scsi_cmnd *sc,
void (*done)(struct scsi_cmnd *))
{
unsigned long flags;
struct iu_entry *iue = (struct iu_entry *) sc->SCp.ptr;
struct srp_target *target = iue->target;
+ int err = 0;
- dprintk("%p %p %x\n", iue, target, vio_iu(iue)->srp.cmd.cdb[0]);
+ dprintk("%p %p %x %u\n", iue, target, vio_iu(iue)->srp.cmd.cdb[0],
+ cmd->usg_sg);
+
+ if (sc->use_sg)
+ err = srp_transfer_data(sc, &vio_iu(iue)->srp.cmd, ibmvstgt_rdma, 1, 1);
spin_lock_irqsave(&target->lock, flags);
list_del(&iue->ilist);
spin_unlock_irqrestore(&target->lock, flags);
- if (sc->result != SAM_STAT_GOOD) {
+ if (err|| sc->result != SAM_STAT_GOOD) {
eprintk("operation failed %p %d %x\n",
iue, sc->result, vio_iu(iue)->srp.cmd.cdb[0]);
send_rsp(iue, sc, HARDWARE_ERROR, 0x00);
@@ -503,7 +493,8 @@ static void process_iu(struct viosrp_crq *crq, struct srp_target *target)
{
struct vio_port *vport = target_to_port(target);
struct iu_entry *iue;
- long err, done;
+ long err;
+ int done = 1;
iue = srp_iu_get(target);
if (!iue) {
@@ -518,7 +509,6 @@ static void process_iu(struct viosrp_crq *crq, struct srp_target *target)
if (err != H_SUCCESS) {
eprintk("%ld transferring data error %p\n", err, iue);
- done = 1;
goto out;
}
@@ -794,7 +784,6 @@ static struct scsi_host_template ibmvstgt_sht = {
.use_clustering = DISABLE_CLUSTERING,
.max_sectors = DEFAULT_MAX_SECTORS,
.transfer_response = ibmvstgt_cmd_done,
- .transfer_data = ibmvstgt_transfer_data,
.eh_abort_handler = ibmvstgt_eh_abort_handler,
.tsk_mgmt_response = ibmvstgt_tsk_mgmt_response,
.shost_attrs = ibmvstgt_attrs,
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index e9bd29975db..2c7b77e833f 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -89,10 +89,9 @@ static unsigned int ipr_log_level = IPR_DEFAULT_LOG_LEVEL;
static unsigned int ipr_max_speed = 1;
static int ipr_testmode = 0;
static unsigned int ipr_fastfail = 0;
-static unsigned int ipr_transop_timeout = IPR_OPERATIONAL_TIMEOUT;
+static unsigned int ipr_transop_timeout = 0;
static unsigned int ipr_enable_cache = 1;
static unsigned int ipr_debug = 0;
-static int ipr_auto_create = 1;
static DEFINE_SPINLOCK(ipr_driver_lock);
/* This table describes the differences between DMA controller chips */
@@ -159,15 +158,13 @@ module_param_named(enable_cache, ipr_enable_cache, int, 0);
MODULE_PARM_DESC(enable_cache, "Enable adapter's non-volatile write cache (default: 1)");
module_param_named(debug, ipr_debug, int, 0);
MODULE_PARM_DESC(debug, "Enable device driver debugging logging. Set to 1 to enable. (default: 0)");
-module_param_named(auto_create, ipr_auto_create, int, 0);
-MODULE_PARM_DESC(auto_create, "Auto-create single device RAID 0 arrays when initialized (default: 1)");
MODULE_LICENSE("GPL");
MODULE_VERSION(IPR_DRIVER_VERSION);
/* A constant array of IOASCs/URCs/Error Messages */
static const
struct ipr_error_table_t ipr_error_table[] = {
- {0x00000000, 1, 1,
+ {0x00000000, 1, IPR_DEFAULT_LOG_LEVEL,
"8155: An unknown error was received"},
{0x00330000, 0, 0,
"Soft underlength error"},
@@ -175,37 +172,37 @@ struct ipr_error_table_t ipr_error_table[] = {
"Command to be cancelled not found"},
{0x00808000, 0, 0,
"Qualified success"},
- {0x01080000, 1, 1,
+ {0x01080000, 1, IPR_DEFAULT_LOG_LEVEL,
"FFFE: Soft device bus error recovered by the IOA"},
- {0x01088100, 0, 1,
+ {0x01088100, 0, IPR_DEFAULT_LOG_LEVEL,
"4101: Soft device bus fabric error"},
- {0x01170600, 0, 1,
+ {0x01170600, 0, IPR_DEFAULT_LOG_LEVEL,
"FFF9: Device sector reassign successful"},
- {0x01170900, 0, 1,
+ {0x01170900, 0, IPR_DEFAULT_LOG_LEVEL,
"FFF7: Media error recovered by device rewrite procedures"},
- {0x01180200, 0, 1,
+ {0x01180200, 0, IPR_DEFAULT_LOG_LEVEL,
"7001: IOA sector reassignment successful"},
- {0x01180500, 0, 1,
+ {0x01180500, 0, IPR_DEFAULT_LOG_LEVEL,
"FFF9: Soft media error. Sector reassignment recommended"},
- {0x01180600, 0, 1,
+ {0x01180600, 0, IPR_DEFAULT_LOG_LEVEL,
"FFF7: Media error recovered by IOA rewrite procedures"},
- {0x01418000, 0, 1,
+ {0x01418000, 0, IPR_DEFAULT_LOG_LEVEL,
"FF3D: Soft PCI bus error recovered by the IOA"},
- {0x01440000, 1, 1,
+ {0x01440000, 1, IPR_DEFAULT_LOG_LEVEL,
"FFF6: Device hardware error recovered by the IOA"},
- {0x01448100, 0, 1,
+ {0x01448100, 0, IPR_DEFAULT_LOG_LEVEL,
"FFF6: Device hardware error recovered by the device"},
- {0x01448200, 1, 1,
+ {0x01448200, 1, IPR_DEFAULT_LOG_LEVEL,
"FF3D: Soft IOA error recovered by the IOA"},
- {0x01448300, 0, 1,
+ {0x01448300, 0, IPR_DEFAULT_LOG_LEVEL,
"FFFA: Undefined device response recovered by the IOA"},
- {0x014A0000, 1, 1,
+ {0x014A0000, 1, IPR_DEFAULT_LOG_LEVEL,
"FFF6: Device bus error, message or command phase"},
- {0x014A8000, 0, 1,
+ {0x014A8000, 0, IPR_DEFAULT_LOG_LEVEL,
"FFFE: Task Management Function failed"},
- {0x015D0000, 0, 1,
+ {0x015D0000, 0, IPR_DEFAULT_LOG_LEVEL,
"FFF6: Failure prediction threshold exceeded"},
- {0x015D9200, 0, 1,
+ {0x015D9200, 0, IPR_DEFAULT_LOG_LEVEL,
"8009: Impending cache battery pack failure"},
{0x02040400, 0, 0,
"34FF: Disk device format in progress"},
@@ -215,85 +212,85 @@ struct ipr_error_table_t ipr_error_table[] = {
"No ready, IOA shutdown"},
{0x025A0000, 0, 0,
"Not ready, IOA has been shutdown"},
- {0x02670100, 0, 1,
+ {0x02670100, 0, IPR_DEFAULT_LOG_LEVEL,
"3020: Storage subsystem configuration error"},
{0x03110B00, 0, 0,
"FFF5: Medium error, data unreadable, recommend reassign"},
{0x03110C00, 0, 0,
"7000: Medium error, data unreadable, do not reassign"},
- {0x03310000, 0, 1,
+ {0x03310000, 0, IPR_DEFAULT_LOG_LEVEL,
"FFF3: Disk media format bad"},
- {0x04050000, 0, 1,
+ {0x04050000, 0, IPR_DEFAULT_LOG_LEVEL,
"3002: Addressed device failed to respond to selection"},
- {0x04080000, 1, 1,
+ {0x04080000, 1, IPR_DEFAULT_LOG_LEVEL,
"3100: Device bus error"},
- {0x04080100, 0, 1,
+ {0x04080100, 0, IPR_DEFAULT_LOG_LEVEL,
"3109: IOA timed out a device command"},
{0x04088000, 0, 0,
"3120: SCSI bus is not operational"},
- {0x04088100, 0, 1,
+ {0x04088100, 0, IPR_DEFAULT_LOG_LEVEL,
"4100: Hard device bus fabric error"},
- {0x04118000, 0, 1,
+ {0x04118000, 0, IPR_DEFAULT_LOG_LEVEL,
"9000: IOA reserved area data check"},
- {0x04118100, 0, 1,
+ {0x04118100, 0, IPR_DEFAULT_LOG_LEVEL,
"9001: IOA reserved area invalid data pattern"},
- {0x04118200, 0, 1,
+ {0x04118200, 0, IPR_DEFAULT_LOG_LEVEL,
"9002: IOA reserved area LRC error"},
- {0x04320000, 0, 1,
+ {0x04320000, 0, IPR_DEFAULT_LOG_LEVEL,
"102E: Out of alternate sectors for disk storage"},
- {0x04330000, 1, 1,
+ {0x04330000, 1, IPR_DEFAULT_LOG_LEVEL,
"FFF4: Data transfer underlength error"},
- {0x04338000, 1, 1,
+ {0x04338000, 1, IPR_DEFAULT_LOG_LEVEL,
"FFF4: Data transfer overlength error"},
- {0x043E0100, 0, 1,
+ {0x043E0100, 0, IPR_DEFAULT_LOG_LEVEL,
"3400: Logical unit failure"},
- {0x04408500, 0, 1,
+ {0x04408500, 0, IPR_DEFAULT_LOG_LEVEL,
"FFF4: Device microcode is corrupt"},
- {0x04418000, 1, 1,
+ {0x04418000, 1, IPR_DEFAULT_LOG_LEVEL,
"8150: PCI bus error"},
{0x04430000, 1, 0,
"Unsupported device bus message received"},
- {0x04440000, 1, 1,
+ {0x04440000, 1, IPR_DEFAULT_LOG_LEVEL,
"FFF4: Disk device problem"},
- {0x04448200, 1, 1,
+ {0x04448200, 1, IPR_DEFAULT_LOG_LEVEL,
"8150: Permanent IOA failure"},
- {0x04448300, 0, 1,
+ {0x04448300, 0, IPR_DEFAULT_LOG_LEVEL,
"3010: Disk device returned wrong response to IOA"},
- {0x04448400, 0, 1,
+ {0x04448400, 0, IPR_DEFAULT_LOG_LEVEL,
"8151: IOA microcode error"},
{0x04448500, 0, 0,
"Device bus status error"},
- {0x04448600, 0, 1,
+ {0x04448600, 0, IPR_DEFAULT_LOG_LEVEL,
"8157: IOA error requiring IOA reset to recover"},
{0x04448700, 0, 0,
"ATA device status error"},
{0x04490000, 0, 0,
"Message reject received from the device"},
- {0x04449200, 0, 1,
+ {0x04449200, 0, IPR_DEFAULT_LOG_LEVEL,
"8008: A permanent cache battery pack failure occurred"},
- {0x0444A000, 0, 1,
+ {0x0444A000, 0, IPR_DEFAULT_LOG_LEVEL,
"9090: Disk unit has been modified after the last known status"},
- {0x0444A200, 0, 1,
+ {0x0444A200, 0, IPR_DEFAULT_LOG_LEVEL,
"9081: IOA detected device error"},
- {0x0444A300, 0, 1,
+ {0x0444A300, 0, IPR_DEFAULT_LOG_LEVEL,
"9082: IOA detected device error"},
- {0x044A0000, 1, 1,
+ {0x044A0000, 1, IPR_DEFAULT_LOG_LEVEL,
"3110: Device bus error, message or command phase"},
- {0x044A8000, 1, 1,
+ {0x044A8000, 1, IPR_DEFAULT_LOG_LEVEL,
"3110: SAS Command / Task Management Function failed"},
- {0x04670400, 0, 1,
+ {0x04670400, 0, IPR_DEFAULT_LOG_LEVEL,
"9091: Incorrect hardware configuration change has been detected"},
- {0x04678000, 0, 1,
+ {0x04678000, 0, IPR_DEFAULT_LOG_LEVEL,
"9073: Invalid multi-adapter configuration"},
- {0x04678100, 0, 1,
+ {0x04678100, 0, IPR_DEFAULT_LOG_LEVEL,
"4010: Incorrect connection between cascaded expanders"},
- {0x04678200, 0, 1,
+ {0x04678200, 0, IPR_DEFAULT_LOG_LEVEL,
"4020: Connections exceed IOA design limits"},
- {0x04678300, 0, 1,
+ {0x04678300, 0, IPR_DEFAULT_LOG_LEVEL,
"4030: Incorrect multipath connection"},
- {0x04679000, 0, 1,
+ {0x04679000, 0, IPR_DEFAULT_LOG_LEVEL,
"4110: Unsupported enclosure function"},
- {0x046E0000, 0, 1,
+ {0x046E0000, 0, IPR_DEFAULT_LOG_LEVEL,
"FFF4: Command to logical unit failed"},
{0x05240000, 1, 0,
"Illegal request, invalid request type or request packet"},
@@ -313,101 +310,103 @@ struct ipr_error_table_t ipr_error_table[] = {
"Illegal request, command sequence error"},
{0x052C8000, 1, 0,
"Illegal request, dual adapter support not enabled"},
- {0x06040500, 0, 1,
+ {0x06040500, 0, IPR_DEFAULT_LOG_LEVEL,
"9031: Array protection temporarily suspended, protection resuming"},
- {0x06040600, 0, 1,
+ {0x06040600, 0, IPR_DEFAULT_LOG_LEVEL,
"9040: Array protection temporarily suspended, protection resuming"},
- {0x06288000, 0, 1,
+ {0x06288000, 0, IPR_DEFAULT_LOG_LEVEL,
"3140: Device bus not ready to ready transition"},
- {0x06290000, 0, 1,
+ {0x06290000, 0, IPR_DEFAULT_LOG_LEVEL,
"FFFB: SCSI bus was reset"},
{0x06290500, 0, 0,
"FFFE: SCSI bus transition to single ended"},
{0x06290600, 0, 0,
"FFFE: SCSI bus transition to LVD"},
- {0x06298000, 0, 1,
+ {0x06298000, 0, IPR_DEFAULT_LOG_LEVEL,
"FFFB: SCSI bus was reset by another initiator"},
- {0x063F0300, 0, 1,
+ {0x063F0300, 0, IPR_DEFAULT_LOG_LEVEL,
"3029: A device replacement has occurred"},
- {0x064C8000, 0, 1,
+ {0x064C8000, 0, IPR_DEFAULT_LOG_LEVEL,
"9051: IOA cache data exists for a missing or failed device"},
- {0x064C8100, 0, 1,
+ {0x064C8100, 0, IPR_DEFAULT_LOG_LEVEL,
"9055: Auxiliary cache IOA contains cache data needed by the primary IOA"},
- {0x06670100, 0, 1,
+ {0x06670100, 0, IPR_DEFAULT_LOG_LEVEL,
"9025: Disk unit is not supported at its physical location"},
- {0x06670600, 0, 1,
+ {0x06670600, 0, IPR_DEFAULT_LOG_LEVEL,
"3020: IOA detected a SCSI bus configuration error"},
- {0x06678000, 0, 1,
+ {0x06678000, 0, IPR_DEFAULT_LOG_LEVEL,
"3150: SCSI bus configuration error"},
- {0x06678100, 0, 1,
+ {0x06678100, 0, IPR_DEFAULT_LOG_LEVEL,
"9074: Asymmetric advanced function disk configuration"},
- {0x06678300, 0, 1,
+ {0x06678300, 0, IPR_DEFAULT_LOG_LEVEL,
"4040: Incomplete multipath connection between IOA and enclosure"},
- {0x06678400, 0, 1,
+ {0x06678400, 0, IPR_DEFAULT_LOG_LEVEL,
"4041: Incomplete multipath connection between enclosure and device"},
- {0x06678500, 0, 1,
+ {0x06678500, 0, IPR_DEFAULT_LOG_LEVEL,
"9075: Incomplete multipath connection between IOA and remote IOA"},
- {0x06678600, 0, 1,
+ {0x06678600, 0, IPR_DEFAULT_LOG_LEVEL,
"9076: Configuration error, missing remote IOA"},
- {0x06679100, 0, 1,
+ {0x06679100, 0, IPR_DEFAULT_LOG_LEVEL,
"4050: Enclosure does not support a required multipath function"},
- {0x06690200, 0, 1,
+ {0x06690200, 0, IPR_DEFAULT_LOG_LEVEL,
"9041: Array protection temporarily suspended"},
- {0x06698200, 0, 1,
+ {0x06698200, 0, IPR_DEFAULT_LOG_LEVEL,
"9042: Corrupt array parity detected on specified device"},
- {0x066B0200, 0, 1,
+ {0x066B0200, 0, IPR_DEFAULT_LOG_LEVEL,
"9030: Array no longer protected due to missing or failed disk unit"},
- {0x066B8000, 0, 1,
+ {0x066B8000, 0, IPR_DEFAULT_LOG_LEVEL,
"9071: Link operational transition"},
- {0x066B8100, 0, 1,
+ {0x066B8100, 0, IPR_DEFAULT_LOG_LEVEL,
"9072: Link not operational transition"},
- {0x066B8200, 0, 1,
+ {0x066B8200, 0, IPR_DEFAULT_LOG_LEVEL,
"9032: Array exposed but still protected"},
- {0x066B9100, 0, 1,
+ {0x066B8300, 0, IPR_DEFAULT_LOG_LEVEL + 1,
+ "70DD: Device forced failed by disrupt device command"},
+ {0x066B9100, 0, IPR_DEFAULT_LOG_LEVEL,
"4061: Multipath redundancy level got better"},
- {0x066B9200, 0, 1,
+ {0x066B9200, 0, IPR_DEFAULT_LOG_LEVEL,
"4060: Multipath redundancy level got worse"},
{0x07270000, 0, 0,
"Failure due to other device"},
- {0x07278000, 0, 1,
+ {0x07278000, 0, IPR_DEFAULT_LOG_LEVEL,
"9008: IOA does not support functions expected by devices"},
- {0x07278100, 0, 1,
+ {0x07278100, 0, IPR_DEFAULT_LOG_LEVEL,
"9010: Cache data associated with attached devices cannot be found"},
- {0x07278200, 0, 1,
+ {0x07278200, 0, IPR_DEFAULT_LOG_LEVEL,
"9011: Cache data belongs to devices other than those attached"},
- {0x07278400, 0, 1,
+ {0x07278400, 0, IPR_DEFAULT_LOG_LEVEL,
"9020: Array missing 2 or more devices with only 1 device present"},
- {0x07278500, 0, 1,
+ {0x07278500, 0, IPR_DEFAULT_LOG_LEVEL,
"9021: Array missing 2 or more devices with 2 or more devices present"},
- {0x07278600, 0, 1,
+ {0x07278600, 0, IPR_DEFAULT_LOG_LEVEL,
"9022: Exposed array is missing a required device"},
- {0x07278700, 0, 1,
+ {0x07278700, 0, IPR_DEFAULT_LOG_LEVEL,
"9023: Array member(s) not at required physical locations"},
- {0x07278800, 0, 1,
+ {0x07278800, 0, IPR_DEFAULT_LOG_LEVEL,
"9024: Array not functional due to present hardware configuration"},
- {0x07278900, 0, 1,
+ {0x07278900, 0, IPR_DEFAULT_LOG_LEVEL,
"9026: Array not functional due to present hardware configuration"},
- {0x07278A00, 0, 1,
+ {0x07278A00, 0, IPR_DEFAULT_LOG_LEVEL,
"9027: Array is missing a device and parity is out of sync"},
- {0x07278B00, 0, 1,
+ {0x07278B00, 0, IPR_DEFAULT_LOG_LEVEL,
"9028: Maximum number of arrays already exist"},
- {0x07278C00, 0, 1,
+ {0x07278C00, 0, IPR_DEFAULT_LOG_LEVEL,
"9050: Required cache data cannot be located for a disk unit"},
- {0x07278D00, 0, 1,
+ {0x07278D00, 0, IPR_DEFAULT_LOG_LEVEL,
"9052: Cache data exists for a device that has been modified"},
- {0x07278F00, 0, 1,
+ {0x07278F00, 0, IPR_DEFAULT_LOG_LEVEL,
"9054: IOA resources not available due to previous problems"},
- {0x07279100, 0, 1,
+ {0x07279100, 0, IPR_DEFAULT_LOG_LEVEL,
"9092: Disk unit requires initialization before use"},
- {0x07279200, 0, 1,
+ {0x07279200, 0, IPR_DEFAULT_LOG_LEVEL,
"9029: Incorrect hardware configuration change has been detected"},
- {0x07279600, 0, 1,
+ {0x07279600, 0, IPR_DEFAULT_LOG_LEVEL,
"9060: One or more disk pairs are missing from an array"},
- {0x07279700, 0, 1,
+ {0x07279700, 0, IPR_DEFAULT_LOG_LEVEL,
"9061: One or more disks are missing from an array"},
- {0x07279800, 0, 1,
+ {0x07279800, 0, IPR_DEFAULT_LOG_LEVEL,
"9062: One or more disks are missing from an array"},
- {0x07279900, 0, 1,
+ {0x07279900, 0, IPR_DEFAULT_LOG_LEVEL,
"9063: Maximum number of functional arrays has been exceeded"},
{0x0B260000, 0, 0,
"Aborted command, invalid descriptor"},
@@ -481,12 +480,16 @@ static void ipr_reinit_ipr_cmnd(struct ipr_cmnd *ipr_cmd)
{
struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
struct ipr_ioasa *ioasa = &ipr_cmd->ioasa;
+ dma_addr_t dma_addr = be32_to_cpu(ioarcb->ioarcb_host_pci_addr);
memset(&ioarcb->cmd_pkt, 0, sizeof(struct ipr_cmd_pkt));
ioarcb->write_data_transfer_length = 0;
ioarcb->read_data_transfer_length = 0;
ioarcb->write_ioadl_len = 0;
ioarcb->read_ioadl_len = 0;
+ ioarcb->write_ioadl_addr =
+ cpu_to_be32(dma_addr + offsetof(struct ipr_cmnd, ioadl));
+ ioarcb->read_ioadl_addr = ioarcb->write_ioadl_addr;
ioasa->ioasc = 0;
ioasa->residual_data_len = 0;
ioasa->u.gata.status = 0;
@@ -1610,7 +1613,7 @@ static void ipr_handle_log_data(struct ipr_ioa_cfg *ioa_cfg,
/* Set indication we have logged an error */
ioa_cfg->errors_logged++;
- if (ioa_cfg->log_level < IPR_DEFAULT_LOG_LEVEL)
+ if (ioa_cfg->log_level < ipr_error_table[error_index].log_hcam)
return;
if (be32_to_cpu(hostrcb->hcam.length) > sizeof(hostrcb->hcam.u.raw))
hostrcb->hcam.length = cpu_to_be32(sizeof(hostrcb->hcam.u.raw));
@@ -3850,6 +3853,8 @@ static int __ipr_eh_dev_reset(struct scsi_cmnd * scsi_cmd)
if (ipr_cmd->ioarcb.res_handle == res->cfgte.res_handle) {
if (ipr_cmd->scsi_cmd)
ipr_cmd->done = ipr_scsi_eh_done;
+ if (ipr_cmd->qc)
+ ipr_cmd->done = ipr_sata_eh_done;
if (ipr_cmd->qc && !(ipr_cmd->qc->flags & ATA_QCFLAG_FAILED)) {
ipr_cmd->qc->err_mask |= AC_ERR_TIMEOUT;
ipr_cmd->qc->flags |= ATA_QCFLAG_FAILED;
@@ -4230,6 +4235,14 @@ static int ipr_build_ioadl(struct ipr_ioa_cfg *ioa_cfg,
sglist = scsi_cmd->request_buffer;
+ if (ipr_cmd->dma_use_sg <= ARRAY_SIZE(ioarcb->add_data.u.ioadl)) {
+ ioadl = ioarcb->add_data.u.ioadl;
+ ioarcb->write_ioadl_addr =
+ cpu_to_be32(be32_to_cpu(ioarcb->ioarcb_host_pci_addr) +
+ offsetof(struct ipr_ioarcb, add_data));
+ ioarcb->read_ioadl_addr = ioarcb->write_ioadl_addr;
+ }
+
for (i = 0; i < ipr_cmd->dma_use_sg; i++) {
ioadl[i].flags_and_data_len =
cpu_to_be32(ioadl_flags | sg_dma_len(&sglist[i]));
@@ -4260,6 +4273,11 @@ static int ipr_build_ioadl(struct ipr_ioa_cfg *ioa_cfg,
scsi_cmd->sc_data_direction);
if (likely(!pci_dma_mapping_error(ipr_cmd->dma_handle))) {
+ ioadl = ioarcb->add_data.u.ioadl;
+ ioarcb->write_ioadl_addr =
+ cpu_to_be32(be32_to_cpu(ioarcb->ioarcb_host_pci_addr) +
+ offsetof(struct ipr_ioarcb, add_data));
+ ioarcb->read_ioadl_addr = ioarcb->write_ioadl_addr;
ipr_cmd->dma_use_sg = 1;
ioadl[0].flags_and_data_len =
cpu_to_be32(ioadl_flags | length | IPR_IOADL_FLAGS_LAST);
@@ -4346,11 +4364,9 @@ static void ipr_erp_done(struct ipr_cmnd *ipr_cmd)
**/
static void ipr_reinit_ipr_cmnd_for_erp(struct ipr_cmnd *ipr_cmd)
{
- struct ipr_ioarcb *ioarcb;
- struct ipr_ioasa *ioasa;
-
- ioarcb = &ipr_cmd->ioarcb;
- ioasa = &ipr_cmd->ioasa;
+ struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
+ struct ipr_ioasa *ioasa = &ipr_cmd->ioasa;
+ dma_addr_t dma_addr = be32_to_cpu(ioarcb->ioarcb_host_pci_addr);
memset(&ioarcb->cmd_pkt, 0, sizeof(struct ipr_cmd_pkt));
ioarcb->write_data_transfer_length = 0;
@@ -4359,6 +4375,9 @@ static void ipr_reinit_ipr_cmnd_for_erp(struct ipr_cmnd *ipr_cmd)
ioarcb->read_ioadl_len = 0;
ioasa->ioasc = 0;
ioasa->residual_data_len = 0;
+ ioarcb->write_ioadl_addr =
+ cpu_to_be32(dma_addr + offsetof(struct ipr_cmnd, ioadl));
+ ioarcb->read_ioadl_addr = ioarcb->write_ioadl_addr;
}
/**
@@ -4457,12 +4476,13 @@ static void ipr_dump_ioasa(struct ipr_ioa_cfg *ioa_cfg,
{
int i;
u16 data_len;
- u32 ioasc;
+ u32 ioasc, fd_ioasc;
struct ipr_ioasa *ioasa = &ipr_cmd->ioasa;
__be32 *ioasa_data = (__be32 *)ioasa;
int error_index;
ioasc = be32_to_cpu(ioasa->ioasc) & IPR_IOASC_IOASC_MASK;
+ fd_ioasc = be32_to_cpu(ioasa->fd_ioasc) & IPR_IOASC_IOASC_MASK;
if (0 == ioasc)
return;
@@ -4470,13 +4490,19 @@ static void ipr_dump_ioasa(struct ipr_ioa_cfg *ioa_cfg,
if (ioa_cfg->log_level < IPR_DEFAULT_LOG_LEVEL)
return;
- error_index = ipr_get_error(ioasc);
+ if (ioasc == IPR_IOASC_BUS_WAS_RESET && fd_ioasc)
+ error_index = ipr_get_error(fd_ioasc);
+ else
+ error_index = ipr_get_error(ioasc);
if (ioa_cfg->log_level < IPR_MAX_LOG_LEVEL) {
/* Don't log an error if the IOA already logged one */
if (ioasa->ilid != 0)
return;
+ if (!ipr_is_gscsi(res))
+ return;
+
if (ipr_error_table[error_index].log_ioasa == 0)
return;
}
@@ -4636,11 +4662,11 @@ static void ipr_erp_start(struct ipr_ioa_cfg *ioa_cfg,
return;
}
- if (ipr_is_gscsi(res))
- ipr_dump_ioasa(ioa_cfg, ipr_cmd, res);
- else
+ if (!ipr_is_gscsi(res))
ipr_gen_sense(ipr_cmd);
+ ipr_dump_ioasa(ioa_cfg, ipr_cmd, res);
+
switch (ioasc & IPR_IOASC_IOASC_MASK) {
case IPR_IOASC_ABORTED_CMD_TERM_BY_HOST:
if (ipr_is_naca_model(res))
@@ -5121,7 +5147,7 @@ static unsigned int ipr_qc_issue(struct ata_queued_cmd *qc)
struct ipr_ioarcb_ata_regs *regs;
if (unlikely(!ioa_cfg->allow_cmds || ioa_cfg->ioa_is_dead))
- return -EIO;
+ return AC_ERR_SYSTEM;
ipr_cmd = ipr_get_free_ipr_cmnd(ioa_cfg);
ioarcb = &ipr_cmd->ioarcb;
@@ -5166,7 +5192,7 @@ static unsigned int ipr_qc_issue(struct ata_queued_cmd *qc)
default:
WARN_ON(1);
- return -1;
+ return AC_ERR_INVALID;
}
mb();
@@ -6188,7 +6214,7 @@ static int ipr_reset_enable_ioa(struct ipr_cmnd *ipr_cmd)
dev_info(&ioa_cfg->pdev->dev, "Initializing IOA.\n");
ipr_cmd->timer.data = (unsigned long) ipr_cmd;
- ipr_cmd->timer.expires = jiffies + (ipr_transop_timeout * HZ);
+ ipr_cmd->timer.expires = jiffies + (ioa_cfg->transop_timeout * HZ);
ipr_cmd->timer.function = (void (*)(unsigned long))ipr_oper_timeout;
ipr_cmd->done = ipr_reset_ioa_job;
add_timer(&ipr_cmd->timer);
@@ -6385,6 +6411,7 @@ static int ipr_reset_start_bist(struct ipr_cmnd *ipr_cmd)
rc = pci_write_config_byte(ioa_cfg->pdev, PCI_BIST, PCI_BIST_START);
if (rc != PCIBIOS_SUCCESSFUL) {
+ pci_unblock_user_cfg_access(ipr_cmd->ioa_cfg->pdev);
ipr_cmd->ioasa.ioasc = cpu_to_be32(IPR_IOASC_PCI_ACCESS_ERROR);
rc = IPR_RC_JOB_CONTINUE;
} else {
@@ -7117,8 +7144,6 @@ static void __devinit ipr_init_ioa_cfg(struct ipr_ioa_cfg *ioa_cfg,
ioa_cfg->pdev = pdev;
ioa_cfg->log_level = ipr_log_level;
ioa_cfg->doorbell = IPR_DOORBELL;
- if (!ipr_auto_create)
- ioa_cfg->doorbell |= IPR_RUNTIME_RESET;
sprintf(ioa_cfg->eye_catcher, IPR_EYECATCHER);
sprintf(ioa_cfg->trace_start, IPR_TRACE_START_LABEL);
sprintf(ioa_cfg->ipr_free_label, IPR_FREEQ_LABEL);
@@ -7233,6 +7258,13 @@ static int __devinit ipr_probe_ioa(struct pci_dev *pdev,
goto out_scsi_host_put;
}
+ if (ipr_transop_timeout)
+ ioa_cfg->transop_timeout = ipr_transop_timeout;
+ else if (dev_id->driver_data & IPR_USE_LONG_TRANSOP_TIMEOUT)
+ ioa_cfg->transop_timeout = IPR_LONG_OPERATIONAL_TIMEOUT;
+ else
+ ioa_cfg->transop_timeout = IPR_OPERATIONAL_TIMEOUT;
+
ipr_regs_pci = pci_resource_start(pdev, 0);
rc = pci_request_regions(pdev, IPR_NAME);
@@ -7540,29 +7572,45 @@ static struct pci_device_id ipr_pci_table[] __devinitdata = {
{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE,
PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_571A, 0, 0, 0 },
{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE,
- PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_575B, 0, 0, 0 },
+ PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_575B, 0, 0,
+ IPR_USE_LONG_TRANSOP_TIMEOUT },
{ PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_OBSIDIAN,
PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_572A, 0, 0, 0 },
{ PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_OBSIDIAN,
PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_572B, 0, 0, 0 },
{ PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_OBSIDIAN,
- PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_575C, 0, 0, 0 },
+ PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_575C, 0, 0,
+ IPR_USE_LONG_TRANSOP_TIMEOUT },
{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN,
PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_572A, 0, 0, 0 },
{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN,
PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_572B, 0, 0, 0 },
{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN,
- PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_575C, 0, 0, 0 },
+ PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_575C, 0, 0,
+ IPR_USE_LONG_TRANSOP_TIMEOUT },
+ { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN_E,
+ PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_574E, 0, 0, 0 },
+ { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN_E,
+ PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_575D, 0, 0,
+ IPR_USE_LONG_TRANSOP_TIMEOUT },
+ { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN_E,
+ PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57B3, 0, 0, 0 },
{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN_E,
- PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57B7, 0, 0, 0 },
+ PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57B7, 0, 0,
+ IPR_USE_LONG_TRANSOP_TIMEOUT },
{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_SNIPE,
PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_2780, 0, 0, 0 },
{ PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_SCAMP,
PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_571E, 0, 0, 0 },
{ PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_SCAMP,
- PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_571F, 0, 0, 0 },
+ PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_571F, 0, 0,
+ IPR_USE_LONG_TRANSOP_TIMEOUT },
{ PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_SCAMP,
- PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_572F, 0, 0, 0 },
+ PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_572F, 0, 0,
+ IPR_USE_LONG_TRANSOP_TIMEOUT },
+ { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_SCAMP_E,
+ PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_574D, 0, 0,
+ IPR_USE_LONG_TRANSOP_TIMEOUT },
{ }
};
MODULE_DEVICE_TABLE(pci, ipr_pci_table);
diff --git a/drivers/scsi/ipr.h b/drivers/scsi/ipr.h
index 88f285de97b..bc53d7cebe0 100644
--- a/drivers/scsi/ipr.h
+++ b/drivers/scsi/ipr.h
@@ -37,8 +37,8 @@
/*
* Literals
*/
-#define IPR_DRIVER_VERSION "2.3.1"
-#define IPR_DRIVER_DATE "(January 23, 2007)"
+#define IPR_DRIVER_VERSION "2.3.2"
+#define IPR_DRIVER_DATE "(March 23, 2007)"
/*
* IPR_MAX_CMD_PER_LUN: This defines the maximum number of outstanding
@@ -55,6 +55,7 @@
#define IPR_NUM_BASE_CMD_BLKS 100
#define PCI_DEVICE_ID_IBM_OBSIDIAN_E 0x0339
+#define PCI_DEVICE_ID_IBM_SCAMP_E 0x034A
#define IPR_SUBS_DEV_ID_2780 0x0264
#define IPR_SUBS_DEV_ID_5702 0x0266
@@ -69,8 +70,12 @@
#define IPR_SUBS_DEV_ID_572A 0x02C1
#define IPR_SUBS_DEV_ID_572B 0x02C2
#define IPR_SUBS_DEV_ID_572F 0x02C3
+#define IPR_SUBS_DEV_ID_574D 0x030B
+#define IPR_SUBS_DEV_ID_574E 0x030A
#define IPR_SUBS_DEV_ID_575B 0x030D
#define IPR_SUBS_DEV_ID_575C 0x0338
+#define IPR_SUBS_DEV_ID_575D 0x033E
+#define IPR_SUBS_DEV_ID_57B3 0x033A
#define IPR_SUBS_DEV_ID_57B7 0x0360
#define IPR_SUBS_DEV_ID_57B8 0x02C2
@@ -104,6 +109,9 @@
#define IPR_IOASC_IOA_WAS_RESET 0x10000001
#define IPR_IOASC_PCI_ACCESS_ERROR 0x10000002
+/* Driver data flags */
+#define IPR_USE_LONG_TRANSOP_TIMEOUT 0x00000001
+
#define IPR_DEFAULT_MAX_ERROR_DUMP 984
#define IPR_NUM_LOG_HCAMS 2
#define IPR_NUM_CFG_CHG_HCAMS 2
@@ -179,6 +187,7 @@
#define IPR_SET_SUP_DEVICE_TIMEOUT (2 * 60 * HZ)
#define IPR_REQUEST_SENSE_TIMEOUT (10 * HZ)
#define IPR_OPERATIONAL_TIMEOUT (5 * 60)
+#define IPR_LONG_OPERATIONAL_TIMEOUT (12 * 60)
#define IPR_WAIT_FOR_RESET_TIMEOUT (2 * HZ)
#define IPR_CHECK_FOR_RESET_TIMEOUT (HZ / 10)
#define IPR_WAIT_FOR_BIST_TIMEOUT (2 * HZ)
@@ -413,9 +422,25 @@ struct ipr_ioarcb_ata_regs {
u8 ctl;
}__attribute__ ((packed, aligned(4)));
+struct ipr_ioadl_desc {
+ __be32 flags_and_data_len;
+#define IPR_IOADL_FLAGS_MASK 0xff000000
+#define IPR_IOADL_GET_FLAGS(x) (be32_to_cpu(x) & IPR_IOADL_FLAGS_MASK)
+#define IPR_IOADL_DATA_LEN_MASK 0x00ffffff
+#define IPR_IOADL_GET_DATA_LEN(x) (be32_to_cpu(x) & IPR_IOADL_DATA_LEN_MASK)
+#define IPR_IOADL_FLAGS_READ 0x48000000
+#define IPR_IOADL_FLAGS_READ_LAST 0x49000000
+#define IPR_IOADL_FLAGS_WRITE 0x68000000
+#define IPR_IOADL_FLAGS_WRITE_LAST 0x69000000
+#define IPR_IOADL_FLAGS_LAST 0x01000000
+
+ __be32 address;
+}__attribute__((packed, aligned (8)));
+
struct ipr_ioarcb_add_data {
union {
struct ipr_ioarcb_ata_regs regs;
+ struct ipr_ioadl_desc ioadl[5];
__be32 add_cmd_parms[10];
}u;
}__attribute__ ((packed, aligned(4)));
@@ -447,21 +472,6 @@ struct ipr_ioarcb {
struct ipr_ioarcb_add_data add_data;
}__attribute__((packed, aligned (4)));
-struct ipr_ioadl_desc {
- __be32 flags_and_data_len;
-#define IPR_IOADL_FLAGS_MASK 0xff000000
-#define IPR_IOADL_GET_FLAGS(x) (be32_to_cpu(x) & IPR_IOADL_FLAGS_MASK)
-#define IPR_IOADL_DATA_LEN_MASK 0x00ffffff
-#define IPR_IOADL_GET_DATA_LEN(x) (be32_to_cpu(x) & IPR_IOADL_DATA_LEN_MASK)
-#define IPR_IOADL_FLAGS_READ 0x48000000
-#define IPR_IOADL_FLAGS_READ_LAST 0x49000000
-#define IPR_IOADL_FLAGS_WRITE 0x68000000
-#define IPR_IOADL_FLAGS_WRITE_LAST 0x69000000
-#define IPR_IOADL_FLAGS_LAST 0x01000000
-
- __be32 address;
-}__attribute__((packed, aligned (8)));
-
struct ipr_ioasa_vset {
__be32 failing_lba_hi;
__be32 failing_lba_lo;
@@ -1119,6 +1129,7 @@ struct ipr_ioa_cfg {
struct ipr_bus_attributes bus_attr[IPR_MAX_NUM_BUSES];
+ unsigned int transop_timeout;
const struct ipr_chip_cfg_t *chip_cfg;
void __iomem *hdw_dma_regs; /* iomapped PCI memory space */
diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c
index 8f55e143143..c9a3abf9e7b 100644
--- a/drivers/scsi/iscsi_tcp.c
+++ b/drivers/scsi/iscsi_tcp.c
@@ -527,12 +527,12 @@ iscsi_tcp_hdr_recv(struct iscsi_conn *conn)
* than 8K, but there are no targets that currently do this.
* For now we fail until we find a vendor that needs it
*/
- if (DEFAULT_MAX_RECV_DATA_SEGMENT_LENGTH <
+ if (ISCSI_DEF_MAX_RECV_SEG_LEN <
tcp_conn->in.datalen) {
printk(KERN_ERR "iscsi_tcp: received buffer of len %u "
"but conn buffer is only %u (opcode %0x)\n",
tcp_conn->in.datalen,
- DEFAULT_MAX_RECV_DATA_SEGMENT_LENGTH, opcode);
+ ISCSI_DEF_MAX_RECV_SEG_LEN, opcode);
rc = ISCSI_ERR_PROTO;
break;
}
@@ -1762,7 +1762,7 @@ iscsi_tcp_conn_create(struct iscsi_cls_session *cls_session, uint32_t conn_idx)
* due to strange issues with iser these are not set
* in iscsi_conn_setup
*/
- conn->max_recv_dlength = DEFAULT_MAX_RECV_DATA_SEGMENT_LENGTH;
+ conn->max_recv_dlength = ISCSI_DEF_MAX_RECV_SEG_LEN;
tcp_conn = kzalloc(sizeof(*tcp_conn), GFP_KERNEL);
if (!tcp_conn)
@@ -1777,14 +1777,24 @@ iscsi_tcp_conn_create(struct iscsi_cls_session *cls_session, uint32_t conn_idx)
tcp_conn->tx_hash.tfm = crypto_alloc_hash("crc32c", 0,
CRYPTO_ALG_ASYNC);
tcp_conn->tx_hash.flags = 0;
- if (IS_ERR(tcp_conn->tx_hash.tfm))
+ if (IS_ERR(tcp_conn->tx_hash.tfm)) {
+ printk(KERN_ERR "Could not create connection due to crc32c "
+ "loading error %ld. Make sure the crc32c module is "
+ "built as a module or into the kernel\n",
+ PTR_ERR(tcp_conn->tx_hash.tfm));
goto free_tcp_conn;
+ }
tcp_conn->rx_hash.tfm = crypto_alloc_hash("crc32c", 0,
CRYPTO_ALG_ASYNC);
tcp_conn->rx_hash.flags = 0;
- if (IS_ERR(tcp_conn->rx_hash.tfm))
+ if (IS_ERR(tcp_conn->rx_hash.tfm)) {
+ printk(KERN_ERR "Could not create connection due to crc32c "
+ "loading error %ld. Make sure the crc32c module is "
+ "built as a module or into the kernel\n",
+ PTR_ERR(tcp_conn->rx_hash.tfm));
goto free_tx_tfm;
+ }
return cls_conn;
@@ -2138,6 +2148,7 @@ static struct scsi_host_template iscsi_sht = {
.change_queue_depth = iscsi_change_queue_depth,
.can_queue = ISCSI_XMIT_CMDS_MAX - 1,
.sg_tablesize = ISCSI_SG_TABLESIZE,
+ .max_sectors = 0xFFFF,
.cmd_per_lun = ISCSI_DEF_CMD_PER_LUN,
.eh_abort_handler = iscsi_eh_abort,
.eh_host_reset_handler = iscsi_eh_host_reset,
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 7c75771c77f..3f5b9b445b2 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -25,6 +25,7 @@
#include <linux/mutex.h>
#include <linux/kfifo.h>
#include <linux/delay.h>
+#include <asm/unaligned.h>
#include <net/tcp.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
@@ -269,14 +270,14 @@ invalid_datalen:
goto out;
}
- senselen = be16_to_cpu(*(__be16 *)data);
+ senselen = be16_to_cpu(get_unaligned((__be16 *) data));
if (datalen < senselen)
goto invalid_datalen;
memcpy(sc->sense_buffer, data + 2,
min_t(uint16_t, senselen, SCSI_SENSE_BUFFERSIZE));
debug_scsi("copied %d bytes of sense\n",
- min(senselen, SCSI_SENSE_BUFFERSIZE));
+ min_t(uint16_t, senselen, SCSI_SENSE_BUFFERSIZE));
}
if (sc->sc_data_direction == DMA_TO_DEVICE)
@@ -577,7 +578,7 @@ void iscsi_conn_failure(struct iscsi_conn *conn, enum iscsi_err err)
}
EXPORT_SYMBOL_GPL(iscsi_conn_failure);
-static int iscsi_xmit_imm_task(struct iscsi_conn *conn)
+static int iscsi_xmit_mtask(struct iscsi_conn *conn)
{
struct iscsi_hdr *hdr = conn->mtask->hdr;
int rc, was_logout = 0;
@@ -591,6 +592,9 @@ static int iscsi_xmit_imm_task(struct iscsi_conn *conn)
if (rc)
return rc;
+ /* done with this in-progress mtask */
+ conn->mtask = NULL;
+
if (was_logout) {
set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx);
return -ENODATA;
@@ -643,11 +647,9 @@ static int iscsi_data_xmit(struct iscsi_conn *conn)
conn->ctask = NULL;
}
if (conn->mtask) {
- rc = iscsi_xmit_imm_task(conn);
+ rc = iscsi_xmit_mtask(conn);
if (rc)
goto again;
- /* done with this in-progress mtask */
- conn->mtask = NULL;
}
/* process immediate first */
@@ -658,12 +660,10 @@ static int iscsi_data_xmit(struct iscsi_conn *conn)
list_add_tail(&conn->mtask->running,
&conn->mgmt_run_list);
spin_unlock_bh(&conn->session->lock);
- rc = iscsi_xmit_imm_task(conn);
+ rc = iscsi_xmit_mtask(conn);
if (rc)
goto again;
}
- /* done with this mtask */
- conn->mtask = NULL;
}
/* process command queue */
@@ -701,12 +701,10 @@ static int iscsi_data_xmit(struct iscsi_conn *conn)
list_add_tail(&conn->mtask->running,
&conn->mgmt_run_list);
spin_unlock_bh(&conn->session->lock);
- rc = tt->xmit_mgmt_task(conn, conn->mtask);
- if (rc)
+ rc = iscsi_xmit_mtask(conn);
+ if (rc)
goto again;
}
- /* done with this mtask */
- conn->mtask = NULL;
}
return -ENODATA;
@@ -1523,7 +1521,7 @@ iscsi_conn_setup(struct iscsi_cls_session *cls_session, uint32_t conn_idx)
}
spin_unlock_bh(&session->lock);
- data = kmalloc(DEFAULT_MAX_RECV_DATA_SEGMENT_LENGTH, GFP_KERNEL);
+ data = kmalloc(ISCSI_DEF_MAX_RECV_SEG_LEN, GFP_KERNEL);
if (!data)
goto login_mtask_data_alloc_fail;
conn->login_mtask->data = conn->data = data;
@@ -1597,6 +1595,9 @@ void iscsi_conn_teardown(struct iscsi_cls_conn *cls_conn)
wake_up(&conn->ehwait);
}
+ /* flush queued up work because we free the connection below */
+ scsi_flush_work(session->host);
+
spin_lock_bh(&session->lock);
kfree(conn->data);
kfree(conn->persistent_address);
diff --git a/drivers/scsi/libsrp.c b/drivers/scsi/libsrp.c
index 6335830df81..5631c199a8e 100644
--- a/drivers/scsi/libsrp.c
+++ b/drivers/scsi/libsrp.c
@@ -224,8 +224,7 @@ static int srp_indirect_data(struct scsi_cmnd *sc, struct srp_cmd *cmd,
struct srp_direct_buf *md = NULL;
struct scatterlist dummy, *sg = NULL;
dma_addr_t token = 0;
- long err;
- unsigned int done = 0;
+ int err = 0;
int nmd, nsg = 0, len;
if (dma_map || ext_desc) {
@@ -257,8 +256,8 @@ static int srp_indirect_data(struct scsi_cmnd *sc, struct srp_cmd *cmd,
sg_dma_address(&dummy) = token;
err = rdma_io(sc, &dummy, 1, &id->table_desc, 1, DMA_TO_DEVICE,
id->table_desc.len);
- if (err < 0) {
- eprintk("Error copying indirect table %ld\n", err);
+ if (err) {
+ eprintk("Error copying indirect table %d\n", err);
goto free_mem;
}
} else {
@@ -271,6 +270,7 @@ rdma:
nsg = dma_map_sg(iue->target->dev, sg, sc->use_sg, DMA_BIDIRECTIONAL);
if (!nsg) {
eprintk("fail to map %p %d\n", iue, sc->use_sg);
+ err = -EIO;
goto free_mem;
}
len = min(sc->request_bufflen, id->len);
@@ -286,7 +286,7 @@ free_mem:
if (token && dma_map)
dma_free_coherent(iue->target->dev, id->table_desc.len, md, token);
- return done;
+ return err;
}
static int data_out_desc_size(struct srp_cmd *cmd)
@@ -351,7 +351,7 @@ int srp_transfer_data(struct scsi_cmnd *sc, struct srp_cmd *cmd,
break;
default:
eprintk("Unknown format %d %x\n", dir, format);
- break;
+ err = -EINVAL;
}
return err;
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 057fd7e0e37..dcf6106f557 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -671,7 +671,7 @@ static int
lpfc_parse_vpd(struct lpfc_hba * phba, uint8_t * vpd, int len)
{
uint8_t lenlo, lenhi;
- uint32_t Length;
+ int Length;
int i, j;
int finished = 0;
int index = 0;
diff --git a/drivers/scsi/osst.c b/drivers/scsi/osst.c
index a967fadb743..08060fb478b 100644
--- a/drivers/scsi/osst.c
+++ b/drivers/scsi/osst.c
@@ -87,6 +87,7 @@ MODULE_AUTHOR("Willem Riede");
MODULE_DESCRIPTION("OnStream {DI-|FW-|SC-|USB}{30|50} Tape Driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS_CHARDEV_MAJOR(OSST_MAJOR);
+MODULE_ALIAS_SCSI_DEVICE(TYPE_TAPE);
module_param(max_dev, int, 0444);
MODULE_PARM_DESC(max_dev, "Maximum number of OnStream Tape Drives to attach (4)");
diff --git a/drivers/scsi/pci2000.h b/drivers/scsi/pci2000.h
deleted file mode 100644
index 0ebd8ce9e1d..00000000000
--- a/drivers/scsi/pci2000.h
+++ /dev/null
@@ -1,197 +0,0 @@
-/****************************************************************************
- * Perceptive Solutions, Inc. PCI-2000 device driver for Linux.
- *
- * pci2000.h - Linux Host Driver for PCI-2000 IntelliCache SCSI Adapters
- *
- * Copyright (c) 1997-1999 Perceptive Solutions, Inc.
- * All Rights Reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that redistributions of source
- * code retain the above copyright notice and this comment without
- * modification.
- *
- * Technical updates and product information at:
- * http://www.psidisk.com
- *
- * Please send questions, comments, bug reports to:
- * tech@psidisk.com Technical Support
- *
- ****************************************************************************/
-#ifndef _PCI2000_H
-#define _PCI2000_H
-
-#include <linux/types.h>
-
-#ifndef PSI_EIDE_SCSIOP
-#define PSI_EIDE_SCSIOP 1
-
-#define LINUXVERSION(v,p,s) (((v)<<16) + ((p)<<8) + (s))
-
-/************************************************/
-/* definition of standard data types */
-/************************************************/
-#define CHAR char
-#define UCHAR unsigned char
-#define SHORT short
-#define USHORT unsigned short
-#define BOOL long
-#define LONG long
-#define ULONG unsigned long
-#define VOID void
-
-typedef CHAR *PCHAR;
-typedef UCHAR *PUCHAR;
-typedef SHORT *PSHORT;
-typedef USHORT *PUSHORT;
-typedef BOOL *PBOOL;
-typedef LONG *PLONG;
-typedef ULONG *PULONG;
-typedef VOID *PVOID;
-
-
-/************************************************/
-/* Misc. macros */
-/************************************************/
-#define ANY2SCSI(up, p) \
-((UCHAR *)up)[0] = (((ULONG)(p)) >> 8); \
-((UCHAR *)up)[1] = ((ULONG)(p));
-
-#define SCSI2LONG(up) \
-( (((long)*(((UCHAR *)up))) << 16) \
-+ (((long)(((UCHAR *)up)[1])) << 8) \
-+ ((long)(((UCHAR *)up)[2])) )
-
-#define XANY2SCSI(up, p) \
-((UCHAR *)up)[0] = ((long)(p)) >> 24; \
-((UCHAR *)up)[1] = ((long)(p)) >> 16; \
-((UCHAR *)up)[2] = ((long)(p)) >> 8; \
-((UCHAR *)up)[3] = ((long)(p));
-
-#define XSCSI2LONG(up) \
-( (((long)(((UCHAR *)up)[0])) << 24) \
-+ (((long)(((UCHAR *)up)[1])) << 16) \
-+ (((long)(((UCHAR *)up)[2])) << 8) \
-+ ((long)(((UCHAR *)up)[3])) )
-
-/************************************************/
-/* SCSI CDB operation codes */
-/************************************************/
-#define SCSIOP_TEST_UNIT_READY 0x00
-#define SCSIOP_REZERO_UNIT 0x01
-#define SCSIOP_REWIND 0x01
-#define SCSIOP_REQUEST_BLOCK_ADDR 0x02
-#define SCSIOP_REQUEST_SENSE 0x03
-#define SCSIOP_FORMAT_UNIT 0x04
-#define SCSIOP_READ_BLOCK_LIMITS 0x05
-#define SCSIOP_REASSIGN_BLOCKS 0x07
-#define SCSIOP_READ6 0x08
-#define SCSIOP_RECEIVE 0x08
-#define SCSIOP_WRITE6 0x0A
-#define SCSIOP_PRINT 0x0A
-#define SCSIOP_SEND 0x0A
-#define SCSIOP_SEEK6 0x0B
-#define SCSIOP_TRACK_SELECT 0x0B
-#define SCSIOP_SLEW_PRINT 0x0B
-#define SCSIOP_SEEK_BLOCK 0x0C
-#define SCSIOP_PARTITION 0x0D
-#define SCSIOP_READ_REVERSE 0x0F
-#define SCSIOP_WRITE_FILEMARKS 0x10
-#define SCSIOP_FLUSH_BUFFER 0x10
-#define SCSIOP_SPACE 0x11
-#define SCSIOP_INQUIRY 0x12
-#define SCSIOP_VERIFY6 0x13
-#define SCSIOP_RECOVER_BUF_DATA 0x14
-#define SCSIOP_MODE_SELECT 0x15
-#define SCSIOP_RESERVE_UNIT 0x16
-#define SCSIOP_RELEASE_UNIT 0x17
-#define SCSIOP_COPY 0x18
-#define SCSIOP_ERASE 0x19
-#define SCSIOP_MODE_SENSE 0x1A
-#define SCSIOP_START_STOP_UNIT 0x1B
-#define SCSIOP_STOP_PRINT 0x1B
-#define SCSIOP_LOAD_UNLOAD 0x1B
-#define SCSIOP_RECEIVE_DIAGNOSTIC 0x1C
-#define SCSIOP_SEND_DIAGNOSTIC 0x1D
-#define SCSIOP_MEDIUM_REMOVAL 0x1E
-#define SCSIOP_READ_CAPACITY 0x25
-#define SCSIOP_READ 0x28
-#define SCSIOP_WRITE 0x2A
-#define SCSIOP_SEEK 0x2B
-#define SCSIOP_LOCATE 0x2B
-#define SCSIOP_WRITE_VERIFY 0x2E
-#define SCSIOP_VERIFY 0x2F
-#define SCSIOP_SEARCH_DATA_HIGH 0x30
-#define SCSIOP_SEARCH_DATA_EQUAL 0x31
-#define SCSIOP_SEARCH_DATA_LOW 0x32
-#define SCSIOP_SET_LIMITS 0x33
-#define SCSIOP_READ_POSITION 0x34
-#define SCSIOP_SYNCHRONIZE_CACHE 0x35
-#define SCSIOP_COMPARE 0x39
-#define SCSIOP_COPY_COMPARE 0x3A
-#define SCSIOP_WRITE_DATA_BUFF 0x3B
-#define SCSIOP_READ_DATA_BUFF 0x3C
-#define SCSIOP_CHANGE_DEFINITION 0x40
-#define SCSIOP_READ_SUB_CHANNEL 0x42
-#define SCSIOP_READ_TOC 0x43
-#define SCSIOP_READ_HEADER 0x44
-#define SCSIOP_PLAY_AUDIO 0x45
-#define SCSIOP_PLAY_AUDIO_MSF 0x47
-#define SCSIOP_PLAY_TRACK_INDEX 0x48
-#define SCSIOP_PLAY_TRACK_RELATIVE 0x49
-#define SCSIOP_PAUSE_RESUME 0x4B
-#define SCSIOP_LOG_SELECT 0x4C
-#define SCSIOP_LOG_SENSE 0x4D
-#define SCSIOP_MODE_SELECT10 0x55
-#define SCSIOP_MODE_SENSE10 0x5A
-#define SCSIOP_LOAD_UNLOAD_SLOT 0xA6
-#define SCSIOP_MECHANISM_STATUS 0xBD
-#define SCSIOP_READ_CD 0xBE
-
-// SCSI read capacity structure
-typedef struct _READ_CAPACITY_DATA
- {
- ULONG blks; /* total blocks (converted to little endian) */
- ULONG blksiz; /* size of each (converted to little endian) */
- } READ_CAPACITY_DATA, *PREAD_CAPACITY_DATA;
-
-// SCSI inquiry data
-typedef struct _INQUIRYDATA
- {
- UCHAR DeviceType :5;
- UCHAR DeviceTypeQualifier :3;
- UCHAR DeviceTypeModifier :7;
- UCHAR RemovableMedia :1;
- UCHAR Versions;
- UCHAR ResponseDataFormat;
- UCHAR AdditionalLength;
- UCHAR Reserved[2];
- UCHAR SoftReset :1;
- UCHAR CommandQueue :1;
- UCHAR Reserved2 :1;
- UCHAR LinkedCommands :1;
- UCHAR Synchronous :1;
- UCHAR Wide16Bit :1;
- UCHAR Wide32Bit :1;
- UCHAR RelativeAddressing :1;
- UCHAR VendorId[8];
- UCHAR ProductId[16];
- UCHAR ProductRevisionLevel[4];
- UCHAR VendorSpecific[20];
- UCHAR Reserved3[40];
- } INQUIRYDATA, *PINQUIRYDATA;
-
-#endif
-
-// function prototypes
-int Pci2000_Detect (struct scsi_host_template *tpnt);
-int Pci2000_Command (Scsi_Cmnd *SCpnt);
-int Pci2000_QueueCommand (Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *));
-int Pci2000_Abort (Scsi_Cmnd *SCpnt);
-int Pci2000_Reset (Scsi_Cmnd *SCpnt, unsigned int flags);
-int Pci2000_Release (struct Scsi_Host *pshost);
-int Pci2000_BiosParam (struct scsi_device *sdev,
- struct block_device *bdev,
- sector_t capacity, int geom[]);
-
-#endif
diff --git a/drivers/scsi/pcmcia/Kconfig b/drivers/scsi/pcmcia/Kconfig
index eac8e179cff..7dd787f6ab2 100644
--- a/drivers/scsi/pcmcia/Kconfig
+++ b/drivers/scsi/pcmcia/Kconfig
@@ -3,11 +3,11 @@
#
menu "PCMCIA SCSI adapter support"
- depends on SCSI!=n && PCMCIA!=n && MODULES
+ depends on SCSI!=n && PCMCIA!=n
config PCMCIA_AHA152X
tristate "Adaptec AHA152X PCMCIA support"
- depends on m && !64BIT
+ depends on !64BIT
select SCSI_SPI_ATTRS
help
Say Y here if you intend to attach this type of PCMCIA SCSI host
@@ -18,7 +18,6 @@ config PCMCIA_AHA152X
config PCMCIA_FDOMAIN
tristate "Future Domain PCMCIA support"
- depends on m
help
Say Y here if you intend to attach this type of PCMCIA SCSI host
adapter to your computer.
@@ -28,7 +27,7 @@ config PCMCIA_FDOMAIN
config PCMCIA_NINJA_SCSI
tristate "NinjaSCSI-3 / NinjaSCSI-32Bi (16bit) PCMCIA support"
- depends on m && !64BIT
+ depends on !64BIT
help
If you intend to attach this type of PCMCIA SCSI host adapter to
your computer, say Y here and read
@@ -62,7 +61,6 @@ config PCMCIA_NINJA_SCSI
config PCMCIA_QLOGIC
tristate "Qlogic PCMCIA support"
- depends on m
help
Say Y here if you intend to attach this type of PCMCIA SCSI host
adapter to your computer.
@@ -72,7 +70,6 @@ config PCMCIA_QLOGIC
config PCMCIA_SYM53C500
tristate "Symbios 53c500 PCMCIA support"
- depends on m
help
Say Y here if you have a New Media Bus Toaster or other PCMCIA
SCSI adapter based on the Symbios 53c500 controller.
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 05f4f2a378e..e8948b679f5 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -1478,14 +1478,17 @@ typedef union {
uint32_t b24 : 24;
struct {
- uint8_t d_id[3];
- uint8_t rsvd_1;
- } r;
-
- struct {
+#ifdef __BIG_ENDIAN
+ uint8_t domain;
+ uint8_t area;
+ uint8_t al_pa;
+#elif __LITTLE_ENDIAN
uint8_t al_pa;
uint8_t area;
uint8_t domain;
+#else
+#error "__BIG_ENDIAN or __LITTLE_ENDIAN must be defined!"
+#endif
uint8_t rsvd_1;
} b;
} port_id_t;
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 98c01cd5e1a..3e296ab845b 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -11,6 +11,11 @@
#include "qla_devtbl.h"
+#ifdef CONFIG_SPARC
+#include <asm/prom.h>
+#include <asm/pbm.h>
+#endif
+
/* XXX(hch): this is ugly, but we don't want to pull in exioctl.h */
#ifndef EXT_IS_LUN_BIT_SET
#define EXT_IS_LUN_BIT_SET(P,L) \
@@ -88,12 +93,7 @@ qla2x00_initialize_adapter(scsi_qla_host_t *ha)
qla_printk(KERN_INFO, ha, "Configure NVRAM parameters...\n");
- rval = ha->isp_ops.nvram_config(ha);
- if (rval) {
- DEBUG2(printk("scsi(%ld): Unable to verify NVRAM data.\n",
- ha->host_no));
- return rval;
- }
+ ha->isp_ops.nvram_config(ha);
if (ha->flags.disable_serdes) {
/* Mask HBA via NVRAM settings? */
@@ -1393,6 +1393,28 @@ qla2x00_set_model_info(scsi_qla_host_t *ha, uint8_t *model, size_t len, char *de
}
}
+/* On sparc systems, obtain port and node WWN from firmware
+ * properties.
+ */
+static void qla2xxx_nvram_wwn_from_ofw(scsi_qla_host_t *ha, nvram_t *nv)
+{
+#ifdef CONFIG_SPARC
+ struct pci_dev *pdev = ha->pdev;
+ struct pcidev_cookie *pcp = pdev->sysdata;
+ struct device_node *dp = pcp->prom_node;
+ u8 *val;
+ int len;
+
+ val = of_get_property(dp, "port-wwn", &len);
+ if (val && len >= WWN_SIZE)
+ memcpy(nv->port_name, val, WWN_SIZE);
+
+ val = of_get_property(dp, "node-wwn", &len);
+ if (val && len >= WWN_SIZE)
+ memcpy(nv->node_name, val, WWN_SIZE);
+#endif
+}
+
/*
* NVRAM configuration for ISP 2xxx
*
@@ -1409,6 +1431,7 @@ qla2x00_set_model_info(scsi_qla_host_t *ha, uint8_t *model, size_t len, char *de
int
qla2x00_nvram_config(scsi_qla_host_t *ha)
{
+ int rval;
uint8_t chksum = 0;
uint16_t cnt;
uint8_t *dptr1, *dptr2;
@@ -1417,6 +1440,8 @@ qla2x00_nvram_config(scsi_qla_host_t *ha)
uint8_t *ptr = (uint8_t *)ha->request_ring;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
+ rval = QLA_SUCCESS;
+
/* Determine NVRAM starting address. */
ha->nvram_size = sizeof(nvram_t);
ha->nvram_base = 0;
@@ -1440,7 +1465,57 @@ qla2x00_nvram_config(scsi_qla_host_t *ha)
qla_printk(KERN_WARNING, ha, "Inconsistent NVRAM detected: "
"checksum=0x%x id=%c version=0x%x.\n", chksum, nv->id[0],
nv->nvram_version);
- return QLA_FUNCTION_FAILED;
+ qla_printk(KERN_WARNING, ha, "Falling back to functioning (yet "
+ "invalid -- WWPN) defaults.\n");
+
+ /*
+ * Set default initialization control block.
+ */
+ memset(nv, 0, ha->nvram_size);
+ nv->parameter_block_version = ICB_VERSION;
+
+ if (IS_QLA23XX(ha)) {
+ nv->firmware_options[0] = BIT_2 | BIT_1;
+ nv->firmware_options[1] = BIT_7 | BIT_5;
+ nv->add_firmware_options[0] = BIT_5;
+ nv->add_firmware_options[1] = BIT_5 | BIT_4;
+ nv->frame_payload_size = __constant_cpu_to_le16(2048);
+ nv->special_options[1] = BIT_7;
+ } else if (IS_QLA2200(ha)) {
+ nv->firmware_options[0] = BIT_2 | BIT_1;
+ nv->firmware_options[1] = BIT_7 | BIT_5;
+ nv->add_firmware_options[0] = BIT_5;
+ nv->add_firmware_options[1] = BIT_5 | BIT_4;
+ nv->frame_payload_size = __constant_cpu_to_le16(1024);
+ } else if (IS_QLA2100(ha)) {
+ nv->firmware_options[0] = BIT_3 | BIT_1;
+ nv->firmware_options[1] = BIT_5;
+ nv->frame_payload_size = __constant_cpu_to_le16(1024);
+ }
+
+ nv->max_iocb_allocation = __constant_cpu_to_le16(256);
+ nv->execution_throttle = __constant_cpu_to_le16(16);
+ nv->retry_count = 8;
+ nv->retry_delay = 1;
+
+ nv->port_name[0] = 33;
+ nv->port_name[3] = 224;
+ nv->port_name[4] = 139;
+
+ qla2xxx_nvram_wwn_from_ofw(ha, nv);
+
+ nv->login_timeout = 4;
+
+ /*
+ * Set default host adapter parameters
+ */
+ nv->host_p[1] = BIT_2;
+ nv->reset_delay = 5;
+ nv->port_down_retry_count = 8;
+ nv->max_luns_per_target = __constant_cpu_to_le16(8);
+ nv->link_down_timeout = 60;
+
+ rval = 1;
}
#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2)
@@ -1653,7 +1728,11 @@ qla2x00_nvram_config(scsi_qla_host_t *ha)
}
}
- return QLA_SUCCESS;
+ if (rval) {
+ DEBUG2_3(printk(KERN_WARNING
+ "scsi(%ld): NVRAM configuration failed!\n", ha->host_no));
+ }
+ return (rval);
}
static void
@@ -3071,9 +3150,7 @@ qla2x00_abort_isp(scsi_qla_host_t *ha)
ha->isp_ops.get_flash_version(ha, ha->request_ring);
- rval = ha->isp_ops.nvram_config(ha);
- if (rval)
- goto isp_abort_retry;
+ ha->isp_ops.nvram_config(ha);
if (!qla2x00_restart_isp(ha)) {
clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags);
@@ -3103,7 +3180,6 @@ qla2x00_abort_isp(scsi_qla_host_t *ha)
}
}
} else { /* failed the ISP abort */
-isp_abort_retry:
ha->flags.online = 1;
if (test_bit(ISP_ABORT_RETRY, &ha->dpc_flags)) {
if (ha->isp_abort_cnt == 0) {
@@ -3290,9 +3366,32 @@ qla24xx_reset_adapter(scsi_qla_host_t *ha)
spin_unlock_irqrestore(&ha->hardware_lock, flags);
}
+/* On sparc systems, obtain port and node WWN from firmware
+ * properties.
+ */
+static void qla24xx_nvram_wwn_from_ofw(scsi_qla_host_t *ha, struct nvram_24xx *nv)
+{
+#ifdef CONFIG_SPARC
+ struct pci_dev *pdev = ha->pdev;
+ struct pcidev_cookie *pcp = pdev->sysdata;
+ struct device_node *dp = pcp->prom_node;
+ u8 *val;
+ int len;
+
+ val = of_get_property(dp, "port-wwn", &len);
+ if (val && len >= WWN_SIZE)
+ memcpy(nv->port_name, val, WWN_SIZE);
+
+ val = of_get_property(dp, "node-wwn", &len);
+ if (val && len >= WWN_SIZE)
+ memcpy(nv->node_name, val, WWN_SIZE);
+#endif
+}
+
int
qla24xx_nvram_config(scsi_qla_host_t *ha)
{
+ int rval;
struct init_cb_24xx *icb;
struct nvram_24xx *nv;
uint32_t *dptr;
@@ -3300,6 +3399,7 @@ qla24xx_nvram_config(scsi_qla_host_t *ha)
uint32_t chksum;
uint16_t cnt;
+ rval = QLA_SUCCESS;
icb = (struct init_cb_24xx *)ha->init_cb;
nv = (struct nvram_24xx *)ha->request_ring;
@@ -3332,7 +3432,52 @@ qla24xx_nvram_config(scsi_qla_host_t *ha)
qla_printk(KERN_WARNING, ha, "Inconsistent NVRAM detected: "
"checksum=0x%x id=%c version=0x%x.\n", chksum, nv->id[0],
le16_to_cpu(nv->nvram_version));
- return QLA_FUNCTION_FAILED;
+ qla_printk(KERN_WARNING, ha, "Falling back to functioning (yet "
+ "invalid -- WWPN) defaults.\n");
+
+ /*
+ * Set default initialization control block.
+ */
+ memset(nv, 0, ha->nvram_size);
+ nv->nvram_version = __constant_cpu_to_le16(ICB_VERSION);
+ nv->version = __constant_cpu_to_le16(ICB_VERSION);
+ nv->frame_payload_size = __constant_cpu_to_le16(2048);
+ nv->execution_throttle = __constant_cpu_to_le16(0xFFFF);
+ nv->exchange_count = __constant_cpu_to_le16(0);
+ nv->hard_address = __constant_cpu_to_le16(124);
+ nv->port_name[0] = 0x21;
+ nv->port_name[1] = 0x00 + PCI_FUNC(ha->pdev->devfn);
+ nv->port_name[2] = 0x00;
+ nv->port_name[3] = 0xe0;
+ nv->port_name[4] = 0x8b;
+ nv->port_name[5] = 0x1c;
+ nv->port_name[6] = 0x55;
+ nv->port_name[7] = 0x86;
+ nv->node_name[0] = 0x20;
+ nv->node_name[1] = 0x00;
+ nv->node_name[2] = 0x00;
+ nv->node_name[3] = 0xe0;
+ nv->node_name[4] = 0x8b;
+ nv->node_name[5] = 0x1c;
+ nv->node_name[6] = 0x55;
+ nv->node_name[7] = 0x86;
+ qla24xx_nvram_wwn_from_ofw(ha, nv);
+ nv->login_retry_count = __constant_cpu_to_le16(8);
+ nv->interrupt_delay_timer = __constant_cpu_to_le16(0);
+ nv->login_timeout = __constant_cpu_to_le16(0);
+ nv->firmware_options_1 =
+ __constant_cpu_to_le32(BIT_14|BIT_13|BIT_2|BIT_1);
+ nv->firmware_options_2 = __constant_cpu_to_le32(2 << 4);
+ nv->firmware_options_2 |= __constant_cpu_to_le32(BIT_12);
+ nv->firmware_options_3 = __constant_cpu_to_le32(2 << 13);
+ nv->host_p = __constant_cpu_to_le32(BIT_11|BIT_10);
+ nv->efi_parameters = __constant_cpu_to_le32(0);
+ nv->reset_delay = 5;
+ nv->max_luns_per_target = __constant_cpu_to_le16(128);
+ nv->port_down_retry_count = __constant_cpu_to_le16(30);
+ nv->link_down_timeout = __constant_cpu_to_le16(30);
+
+ rval = 1;
}
/* Reset Initialization control block */
@@ -3479,7 +3624,11 @@ qla24xx_nvram_config(scsi_qla_host_t *ha)
ha->flags.process_response_queue = 1;
}
- return QLA_SUCCESS;
+ if (rval) {
+ DEBUG2_3(printk(KERN_WARNING
+ "scsi(%ld): NVRAM configuration failed!\n", ha->host_no));
+ }
+ return (rval);
}
static int
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 83376f6ac3d..71e32a24852 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -1280,14 +1280,14 @@ qla2x00_get_port_name(scsi_qla_host_t *ha, uint16_t loop_id, uint8_t *name,
} else {
if (name != NULL) {
/* This function returns name in big endian. */
- name[0] = LSB(mcp->mb[2]);
- name[1] = MSB(mcp->mb[2]);
- name[2] = LSB(mcp->mb[3]);
- name[3] = MSB(mcp->mb[3]);
- name[4] = LSB(mcp->mb[6]);
- name[5] = MSB(mcp->mb[6]);
- name[6] = LSB(mcp->mb[7]);
- name[7] = MSB(mcp->mb[7]);
+ name[0] = MSB(mcp->mb[2]);
+ name[1] = LSB(mcp->mb[2]);
+ name[2] = MSB(mcp->mb[3]);
+ name[3] = LSB(mcp->mb[3]);
+ name[4] = MSB(mcp->mb[6]);
+ name[5] = LSB(mcp->mb[6]);
+ name[6] = MSB(mcp->mb[7]);
+ name[7] = LSB(mcp->mb[7]);
}
DEBUG11(printk("qla2x00_get_port_name(%ld): done.\n",
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 68f5d24b938..b78919a318e 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -62,7 +62,7 @@ MODULE_PARM_DESC(ql2xallocfwdump,
"vary by ISP type. Default is 1 - allocate memory.");
int ql2xextended_error_logging;
-module_param(ql2xextended_error_logging, int, S_IRUGO|S_IRUSR);
+module_param(ql2xextended_error_logging, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(ql2xextended_error_logging,
"Option to enable extended error logging, "
"Default is 0 - no logging. 1 - log errors.");
@@ -157,6 +157,8 @@ static struct scsi_host_template qla24xx_driver_template = {
.slave_alloc = qla2xxx_slave_alloc,
.slave_destroy = qla2xxx_slave_destroy,
+ .scan_finished = qla2xxx_scan_finished,
+ .scan_start = qla2xxx_scan_start,
.change_queue_depth = qla2x00_change_queue_depth,
.change_queue_type = qla2x00_change_queue_type,
.this_id = -1,
@@ -1705,6 +1707,7 @@ qla2x00_remove_one(struct pci_dev *pdev)
scsi_host_put(ha->host);
+ pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
}
@@ -1747,8 +1750,6 @@ qla2x00_free_device(scsi_qla_host_t *ha)
if (ha->iobase)
iounmap(ha->iobase);
pci_release_regions(ha->pdev);
-
- pci_disable_device(ha->pdev);
}
static inline void
diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c
index ff1dd4175a7..206bda093da 100644
--- a/drivers/scsi/qla2xxx/qla_sup.c
+++ b/drivers/scsi/qla2xxx/qla_sup.c
@@ -466,6 +466,7 @@ qla24xx_read_flash_dword(scsi_qla_host_t *ha, uint32_t addr)
udelay(10);
else
rval = QLA_FUNCTION_TIMEOUT;
+ cond_resched();
}
/* TODO: What happens if we time out? */
@@ -508,6 +509,7 @@ qla24xx_write_flash_dword(scsi_qla_host_t *ha, uint32_t addr, uint32_t data)
udelay(10);
else
rval = QLA_FUNCTION_TIMEOUT;
+ cond_resched();
}
return rval;
}
@@ -1255,6 +1257,7 @@ qla2x00_poll_flash(scsi_qla_host_t *ha, uint32_t addr, uint8_t poll_data,
}
udelay(10);
barrier();
+ cond_resched();
}
return status;
}
@@ -1403,6 +1406,7 @@ qla2x00_read_flash_data(scsi_qla_host_t *ha, uint8_t *tmp_buf, uint32_t saddr,
if (saddr % 100)
udelay(10);
*tmp_buf = data;
+ cond_resched();
}
}
@@ -1449,7 +1453,6 @@ uint8_t *
qla2x00_read_optrom_data(struct scsi_qla_host *ha, uint8_t *buf,
uint32_t offset, uint32_t length)
{
- unsigned long flags;
uint32_t addr, midpoint;
uint8_t *data;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
@@ -1458,7 +1461,6 @@ qla2x00_read_optrom_data(struct scsi_qla_host *ha, uint8_t *buf,
qla2x00_suspend_hba(ha);
/* Go with read. */
- spin_lock_irqsave(&ha->hardware_lock, flags);
midpoint = ha->optrom_size / 2;
qla2x00_flash_enable(ha);
@@ -1473,7 +1475,6 @@ qla2x00_read_optrom_data(struct scsi_qla_host *ha, uint8_t *buf,
*data = qla2x00_read_flash_byte(ha, addr);
}
qla2x00_flash_disable(ha);
- spin_unlock_irqrestore(&ha->hardware_lock, flags);
/* Resume HBA. */
qla2x00_resume_hba(ha);
@@ -1487,7 +1488,6 @@ qla2x00_write_optrom_data(struct scsi_qla_host *ha, uint8_t *buf,
{
int rval;
- unsigned long flags;
uint8_t man_id, flash_id, sec_number, data;
uint16_t wd;
uint32_t addr, liter, sec_mask, rest_addr;
@@ -1500,7 +1500,6 @@ qla2x00_write_optrom_data(struct scsi_qla_host *ha, uint8_t *buf,
sec_number = 0;
/* Reset ISP chip. */
- spin_lock_irqsave(&ha->hardware_lock, flags);
WRT_REG_WORD(&reg->ctrl_status, CSR_ISP_SOFT_RESET);
pci_read_config_word(ha->pdev, PCI_COMMAND, &wd);
@@ -1689,10 +1688,10 @@ update_flash:
rval = QLA_FUNCTION_FAILED;
break;
}
+ cond_resched();
}
} while (0);
qla2x00_flash_disable(ha);
- spin_unlock_irqrestore(&ha->hardware_lock, flags);
/* Resume HBA. */
qla2x00_resume_hba(ha);
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index 61347aee55c..dc85495c337 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,7 +7,7 @@
/*
* Driver version
*/
-#define QLA2XXX_VERSION "8.01.07-k5"
+#define QLA2XXX_VERSION "8.01.07-k6"
#define QLA_DRIVER_MAJOR_VER 8
#define QLA_DRIVER_MINOR_VER 1
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index 1c89ee3e69b..4c1e3133476 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -344,7 +344,6 @@ void scsi_destroy_command_freelist(struct Scsi_Host *shost)
void scsi_log_send(struct scsi_cmnd *cmd)
{
unsigned int level;
- struct scsi_device *sdev;
/*
* If ML QUEUE log level is greater than or equal to:
@@ -361,22 +360,17 @@ void scsi_log_send(struct scsi_cmnd *cmd)
level = SCSI_LOG_LEVEL(SCSI_LOG_MLQUEUE_SHIFT,
SCSI_LOG_MLQUEUE_BITS);
if (level > 1) {
- sdev = cmd->device;
- sdev_printk(KERN_INFO, sdev, "send ");
+ scmd_printk(KERN_INFO, cmd, "Send: ");
if (level > 2)
printk("0x%p ", cmd);
- /*
- * spaces to match disposition and cmd->result
- * output in scsi_log_completion.
- */
- printk(" ");
+ printk("\n");
scsi_print_command(cmd);
if (level > 3) {
printk(KERN_INFO "buffer = 0x%p, bufflen = %d,"
" done = 0x%p, queuecommand 0x%p\n",
cmd->request_buffer, cmd->request_bufflen,
cmd->done,
- sdev->host->hostt->queuecommand);
+ cmd->device->host->hostt->queuecommand);
}
}
@@ -386,7 +380,6 @@ void scsi_log_send(struct scsi_cmnd *cmd)
void scsi_log_completion(struct scsi_cmnd *cmd, int disposition)
{
unsigned int level;
- struct scsi_device *sdev;
/*
* If ML COMPLETE log level is greater than or equal to:
@@ -405,8 +398,7 @@ void scsi_log_completion(struct scsi_cmnd *cmd, int disposition)
SCSI_LOG_MLCOMPLETE_BITS);
if (((level > 0) && (cmd->result || disposition != SUCCESS)) ||
(level > 1)) {
- sdev = cmd->device;
- sdev_printk(KERN_INFO, sdev, "done ");
+ scmd_printk(KERN_INFO, cmd, "Done: ");
if (level > 2)
printk("0x%p ", cmd);
/*
@@ -415,40 +407,35 @@ void scsi_log_completion(struct scsi_cmnd *cmd, int disposition)
*/
switch (disposition) {
case SUCCESS:
- printk("SUCCESS");
+ printk("SUCCESS\n");
break;
case NEEDS_RETRY:
- printk("RETRY ");
+ printk("RETRY\n");
break;
case ADD_TO_MLQUEUE:
- printk("MLQUEUE");
+ printk("MLQUEUE\n");
break;
case FAILED:
- printk("FAILED ");
+ printk("FAILED\n");
break;
case TIMEOUT_ERROR:
/*
* If called via scsi_times_out.
*/
- printk("TIMEOUT");
+ printk("TIMEOUT\n");
break;
default:
- printk("UNKNOWN");
+ printk("UNKNOWN\n");
}
- printk(" %8x ", cmd->result);
+ scsi_print_result(cmd);
scsi_print_command(cmd);
- if (status_byte(cmd->result) & CHECK_CONDITION) {
- /*
- * XXX The scsi_print_sense formatting/prefix
- * doesn't match this function.
- */
+ if (status_byte(cmd->result) & CHECK_CONDITION)
scsi_print_sense("", cmd);
- }
- if (level > 3) {
- printk(KERN_INFO "scsi host busy %d failed %d\n",
- sdev->host->host_busy,
- sdev->host->host_failed);
- }
+ if (level > 3)
+ scmd_printk(KERN_INFO, cmd,
+ "scsi host busy %d failed %d\n",
+ cmd->device->host->host_busy,
+ cmd->device->host->host_failed);
}
}
}
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 918bb601954..3963e7013bd 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -184,10 +184,19 @@ int scsi_delete_timer(struct scsi_cmnd *scmd)
**/
void scsi_times_out(struct scsi_cmnd *scmd)
{
+ enum scsi_eh_timer_return (* eh_timed_out)(struct scsi_cmnd *);
+
scsi_log_completion(scmd, TIMEOUT_ERROR);
if (scmd->device->host->transportt->eh_timed_out)
- switch (scmd->device->host->transportt->eh_timed_out(scmd)) {
+ eh_timed_out = scmd->device->host->transportt->eh_timed_out;
+ else if (scmd->device->host->hostt->eh_timed_out)
+ eh_timed_out = scmd->device->host->hostt->eh_timed_out;
+ else
+ eh_timed_out = NULL;
+
+ if (eh_timed_out)
+ switch (eh_timed_out(scmd)) {
case EH_HANDLED:
__scsi_done(scmd);
return;
@@ -923,10 +932,12 @@ static int scsi_eh_try_stu(struct scsi_cmnd *scmd)
static unsigned char stu_command[6] = {START_STOP, 0, 0, 0, 1, 0};
if (scmd->device->allow_restart) {
- int rtn;
+ int i, rtn = NEEDS_RETRY;
+
+ for (i = 0; rtn == NEEDS_RETRY && i < 2; i++)
+ rtn = scsi_send_eh_cmnd(scmd, stu_command, 6,
+ START_UNIT_TIMEOUT, 0);
- rtn = scsi_send_eh_cmnd(scmd, stu_command, 6,
- START_UNIT_TIMEOUT, 0);
if (rtn == SUCCESS)
return 0;
}
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 05d79af5ab9..61fbcdcbb00 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -848,8 +848,8 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
memcpy(req->sense, cmd->sense_buffer, len);
req->sense_len = len;
}
- } else
- req->data_len = cmd->resid;
+ }
+ req->data_len = cmd->resid;
}
/*
@@ -968,9 +968,7 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
}
if (result) {
if (!(req->cmd_flags & REQ_QUIET)) {
- scmd_printk(KERN_INFO, cmd,
- "SCSI error: return code = 0x%08x\n",
- result);
+ scsi_print_result(cmd);
if (driver_byte(result) & DRIVER_SENSE)
scsi_print_sense("", cmd);
}
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 0949145304e..a67f315244d 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -181,10 +181,8 @@ int scsi_complete_async_scans(void)
return 0;
}
-#ifdef MODULE
/* Only exported for the benefit of scsi_wait_scan */
EXPORT_SYMBOL_GPL(scsi_complete_async_scans);
-#endif
/**
* scsi_unlock_floptical - unlock device via a special MODE SENSE command
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 939de0de18b..67a38a1409b 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -276,8 +276,22 @@ static int scsi_bus_match(struct device *dev, struct device_driver *gendrv)
return (sdp->inq_periph_qual == SCSI_INQ_PQ_CON)? 1: 0;
}
+static int scsi_bus_uevent(struct device *dev, char **envp, int num_envp,
+ char *buffer, int buffer_size)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+ int i = 0;
+ int length = 0;
+
+ add_uevent_var(envp, num_envp, &i, buffer, buffer_size, &length,
+ "MODALIAS=" SCSI_DEVICE_MODALIAS_FMT, sdev->type);
+ envp[i] = NULL;
+ return 0;
+}
+
static int scsi_bus_suspend(struct device * dev, pm_message_t state)
{
+ struct device_driver *drv = dev->driver;
struct scsi_device *sdev = to_scsi_device(dev);
struct scsi_host_template *sht = sdev->host->hostt;
int err;
@@ -286,28 +300,51 @@ static int scsi_bus_suspend(struct device * dev, pm_message_t state)
if (err)
return err;
- if (sht->suspend)
+ /* call HLD suspend first */
+ if (drv && drv->suspend) {
+ err = drv->suspend(dev, state);
+ if (err)
+ return err;
+ }
+
+ /* then, call host suspend */
+ if (sht->suspend) {
err = sht->suspend(sdev, state);
+ if (err) {
+ if (drv && drv->resume)
+ drv->resume(dev);
+ return err;
+ }
+ }
- return err;
+ return 0;
}
static int scsi_bus_resume(struct device * dev)
{
+ struct device_driver *drv = dev->driver;
struct scsi_device *sdev = to_scsi_device(dev);
struct scsi_host_template *sht = sdev->host->hostt;
- int err = 0;
+ int err = 0, err2 = 0;
+ /* call host resume first */
if (sht->resume)
err = sht->resume(sdev);
+ /* then, call HLD resume */
+ if (drv && drv->resume)
+ err2 = drv->resume(dev);
+
scsi_device_resume(sdev);
- return err;
+
+ /* favor LLD failure */
+ return err ? err : err2;;
}
struct bus_type scsi_bus_type = {
.name = "scsi",
.match = scsi_bus_match,
+ .uevent = scsi_bus_uevent,
.suspend = scsi_bus_suspend,
.resume = scsi_bus_resume,
};
@@ -547,6 +584,14 @@ show_sdev_iostat(iorequest_cnt);
show_sdev_iostat(iodone_cnt);
show_sdev_iostat(ioerr_cnt);
+static ssize_t
+sdev_show_modalias(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct scsi_device *sdev;
+ sdev = to_scsi_device(dev);
+ return snprintf (buf, 20, SCSI_DEVICE_MODALIAS_FMT "\n", sdev->type);
+}
+static DEVICE_ATTR(modalias, S_IRUGO, sdev_show_modalias, NULL);
/* Default template for device attributes. May NOT be modified */
static struct device_attribute *scsi_sysfs_sdev_attrs[] = {
@@ -566,6 +611,7 @@ static struct device_attribute *scsi_sysfs_sdev_attrs[] = {
&dev_attr_iorequest_cnt,
&dev_attr_iodone_cnt,
&dev_attr_ioerr_cnt,
+ &dev_attr_modalias,
NULL
};
diff --git a/drivers/scsi/scsi_tgt_if.c b/drivers/scsi/scsi_tgt_if.c
index 0e08817fdec..ca22ddf8174 100644
--- a/drivers/scsi/scsi_tgt_if.c
+++ b/drivers/scsi/scsi_tgt_if.c
@@ -179,10 +179,12 @@ static int event_recv_msg(struct tgt_event *ev)
switch (ev->hdr.type) {
case TGT_UEVENT_CMD_RSP:
err = scsi_tgt_kspace_exec(ev->p.cmd_rsp.host_no,
- ev->p.cmd_rsp.tag,
ev->p.cmd_rsp.result,
- ev->p.cmd_rsp.len,
+ ev->p.cmd_rsp.tag,
ev->p.cmd_rsp.uaddr,
+ ev->p.cmd_rsp.len,
+ ev->p.cmd_rsp.sense_uaddr,
+ ev->p.cmd_rsp.sense_len,
ev->p.cmd_rsp.rw);
break;
case TGT_UEVENT_TSK_MGMT_RSP:
diff --git a/drivers/scsi/scsi_tgt_lib.c b/drivers/scsi/scsi_tgt_lib.c
index d402aff5f31..2570f48a69c 100644
--- a/drivers/scsi/scsi_tgt_lib.c
+++ b/drivers/scsi/scsi_tgt_lib.c
@@ -28,7 +28,6 @@
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_tgt.h>
-#include <../drivers/md/dm-bio-list.h>
#include "scsi_tgt_priv.h"
@@ -42,16 +41,12 @@ static struct kmem_cache *scsi_tgt_cmd_cache;
struct scsi_tgt_cmd {
/* TODO replace work with James b's code */
struct work_struct work;
- /* TODO replace the lists with a large bio */
- struct bio_list xfer_done_list;
- struct bio_list xfer_list;
+ /* TODO fix limits of some drivers */
+ struct bio *bio;
struct list_head hash_list;
struct request *rq;
u64 tag;
-
- void *buffer;
- unsigned bufflen;
};
#define TGT_HASH_ORDER 4
@@ -93,7 +88,12 @@ struct scsi_cmnd *scsi_host_get_command(struct Scsi_Host *shost,
if (!tcmd)
goto put_dev;
- rq = blk_get_request(shost->uspace_req_q, write, gfp_mask);
+ /*
+ * The blk helpers are used to the READ/WRITE requests
+ * transfering data from a initiator point of view. Since
+ * we are in target mode we want the opposite.
+ */
+ rq = blk_get_request(shost->uspace_req_q, !write, gfp_mask);
if (!rq)
goto free_tcmd;
@@ -111,8 +111,6 @@ struct scsi_cmnd *scsi_host_get_command(struct Scsi_Host *shost,
rq->cmd_flags |= REQ_TYPE_BLOCK_PC;
rq->end_io_data = tcmd;
- bio_list_init(&tcmd->xfer_list);
- bio_list_init(&tcmd->xfer_done_list);
tcmd->rq = rq;
return cmd;
@@ -157,22 +155,6 @@ void scsi_host_put_command(struct Scsi_Host *shost, struct scsi_cmnd *cmd)
}
EXPORT_SYMBOL_GPL(scsi_host_put_command);
-static void scsi_unmap_user_pages(struct scsi_tgt_cmd *tcmd)
-{
- struct bio *bio;
-
- /* must call bio_endio in case bio was bounced */
- while ((bio = bio_list_pop(&tcmd->xfer_done_list))) {
- bio_endio(bio, bio->bi_size, 0);
- bio_unmap_user(bio);
- }
-
- while ((bio = bio_list_pop(&tcmd->xfer_list))) {
- bio_endio(bio, bio->bi_size, 0);
- bio_unmap_user(bio);
- }
-}
-
static void cmd_hashlist_del(struct scsi_cmnd *cmd)
{
struct request_queue *q = cmd->request->q;
@@ -185,6 +167,11 @@ static void cmd_hashlist_del(struct scsi_cmnd *cmd)
spin_unlock_irqrestore(&qdata->cmd_hash_lock, flags);
}
+static void scsi_unmap_user_pages(struct scsi_tgt_cmd *tcmd)
+{
+ blk_rq_unmap_user(tcmd->bio);
+}
+
static void scsi_tgt_cmd_destroy(struct work_struct *work)
{
struct scsi_tgt_cmd *tcmd =
@@ -193,16 +180,6 @@ static void scsi_tgt_cmd_destroy(struct work_struct *work)
dprintk("cmd %p %d %lu\n", cmd, cmd->sc_data_direction,
rq_data_dir(cmd->request));
- /*
- * We fix rq->cmd_flags here since when we told bio_map_user
- * to write vm for WRITE commands, blk_rq_bio_prep set
- * rq_data_dir the flags to READ.
- */
- if (cmd->sc_data_direction == DMA_TO_DEVICE)
- cmd->request->cmd_flags |= REQ_RW;
- else
- cmd->request->cmd_flags &= ~REQ_RW;
-
scsi_unmap_user_pages(tcmd);
scsi_host_put_command(scsi_tgt_cmd_to_host(cmd), cmd);
}
@@ -215,6 +192,7 @@ static void init_scsi_tgt_cmd(struct request *rq, struct scsi_tgt_cmd *tcmd,
struct list_head *head;
tcmd->tag = tag;
+ tcmd->bio = NULL;
INIT_WORK(&tcmd->work, scsi_tgt_cmd_destroy);
spin_lock_irqsave(&qdata->cmd_hash_lock, flags);
head = &qdata->cmd_hash[cmd_hashfn(tag)];
@@ -349,10 +327,14 @@ static void scsi_tgt_cmd_done(struct scsi_cmnd *cmd)
dprintk("cmd %p %lu\n", cmd, rq_data_dir(cmd->request));
scsi_tgt_uspace_send_status(cmd, tcmd->tag);
+
+ if (cmd->request_buffer)
+ scsi_free_sgtable(cmd->request_buffer, cmd->sglist_len);
+
queue_work(scsi_tgtd, &tcmd->work);
}
-static int __scsi_tgt_transfer_response(struct scsi_cmnd *cmd)
+static int scsi_tgt_transfer_response(struct scsi_cmnd *cmd)
{
struct Scsi_Host *shost = scsi_tgt_cmd_to_host(cmd);
int err;
@@ -365,30 +347,12 @@ static int __scsi_tgt_transfer_response(struct scsi_cmnd *cmd)
case SCSI_MLQUEUE_DEVICE_BUSY:
return -EAGAIN;
}
-
return 0;
}
-static void scsi_tgt_transfer_response(struct scsi_cmnd *cmd)
-{
- struct scsi_tgt_cmd *tcmd = cmd->request->end_io_data;
- int err;
-
- err = __scsi_tgt_transfer_response(cmd);
- if (!err)
- return;
-
- cmd->result = DID_BUS_BUSY << 16;
- err = scsi_tgt_uspace_send_status(cmd, tcmd->tag);
- if (err <= 0)
- /* the eh will have to pick this up */
- printk(KERN_ERR "Could not send cmd %p status\n", cmd);
-}
-
static int scsi_tgt_init_cmd(struct scsi_cmnd *cmd, gfp_t gfp_mask)
{
struct request *rq = cmd->request;
- struct scsi_tgt_cmd *tcmd = rq->end_io_data;
int count;
cmd->use_sg = rq->nr_phys_segments;
@@ -398,143 +362,54 @@ static int scsi_tgt_init_cmd(struct scsi_cmnd *cmd, gfp_t gfp_mask)
cmd->request_bufflen = rq->data_len;
- dprintk("cmd %p addr %p cnt %d %lu\n", cmd, tcmd->buffer, cmd->use_sg,
- rq_data_dir(rq));
+ dprintk("cmd %p cnt %d %lu\n", cmd, cmd->use_sg, rq_data_dir(rq));
count = blk_rq_map_sg(rq->q, rq, cmd->request_buffer);
if (likely(count <= cmd->use_sg)) {
cmd->use_sg = count;
return 0;
}
- eprintk("cmd %p addr %p cnt %d\n", cmd, tcmd->buffer, cmd->use_sg);
+ eprintk("cmd %p cnt %d\n", cmd, cmd->use_sg);
scsi_free_sgtable(cmd->request_buffer, cmd->sglist_len);
return -EINVAL;
}
/* TODO: test this crap and replace bio_map_user with new interface maybe */
static int scsi_map_user_pages(struct scsi_tgt_cmd *tcmd, struct scsi_cmnd *cmd,
- int rw)
+ unsigned long uaddr, unsigned int len, int rw)
{
struct request_queue *q = cmd->request->q;
struct request *rq = cmd->request;
- void *uaddr = tcmd->buffer;
- unsigned int len = tcmd->bufflen;
- struct bio *bio;
int err;
- while (len > 0) {
- dprintk("%lx %u\n", (unsigned long) uaddr, len);
- bio = bio_map_user(q, NULL, (unsigned long) uaddr, len, rw);
- if (IS_ERR(bio)) {
- err = PTR_ERR(bio);
- dprintk("fail to map %lx %u %d %x\n",
- (unsigned long) uaddr, len, err, cmd->cmnd[0]);
- goto unmap_bios;
- }
-
- uaddr += bio->bi_size;
- len -= bio->bi_size;
-
+ dprintk("%lx %u\n", uaddr, len);
+ err = blk_rq_map_user(q, rq, (void *)uaddr, len);
+ if (err) {
/*
- * The first bio is added and merged. We could probably
- * try to add others using scsi_merge_bio() but for now
- * we keep it simple. The first bio should be pretty large
- * (either hitting the 1 MB bio pages limit or a queue limit)
- * already but for really large IO we may want to try and
- * merge these.
+ * TODO: need to fixup sg_tablesize, max_segment_size,
+ * max_sectors, etc for modern HW and software drivers
+ * where this value is bogus.
+ *
+ * TODO2: we can alloc a reserve buffer of max size
+ * we can handle and do the slow copy path for really large
+ * IO.
*/
- if (!rq->bio) {
- blk_rq_bio_prep(q, rq, bio);
- rq->data_len = bio->bi_size;
- } else
- /* put list of bios to transfer in next go around */
- bio_list_add(&tcmd->xfer_list, bio);
+ eprintk("Could not handle request of size %u.\n", len);
+ return err;
}
- cmd->offset = 0;
+ tcmd->bio = rq->bio;
err = scsi_tgt_init_cmd(cmd, GFP_KERNEL);
if (err)
- goto unmap_bios;
+ goto unmap_rq;
return 0;
-unmap_bios:
- if (rq->bio) {
- bio_unmap_user(rq->bio);
- while ((bio = bio_list_pop(&tcmd->xfer_list)))
- bio_unmap_user(bio);
- }
-
+unmap_rq:
+ scsi_unmap_user_pages(tcmd);
return err;
}
-static int scsi_tgt_transfer_data(struct scsi_cmnd *);
-
-static void scsi_tgt_data_transfer_done(struct scsi_cmnd *cmd)
-{
- struct scsi_tgt_cmd *tcmd = cmd->request->end_io_data;
- struct bio *bio;
- int err;
-
- /* should we free resources here on error ? */
- if (cmd->result) {
-send_uspace_err:
- err = scsi_tgt_uspace_send_status(cmd, tcmd->tag);
- if (err <= 0)
- /* the tgt uspace eh will have to pick this up */
- printk(KERN_ERR "Could not send cmd %p status\n", cmd);
- return;
- }
-
- dprintk("cmd %p request_bufflen %u bufflen %u\n",
- cmd, cmd->request_bufflen, tcmd->bufflen);
-
- scsi_free_sgtable(cmd->request_buffer, cmd->sglist_len);
- bio_list_add(&tcmd->xfer_done_list, cmd->request->bio);
-
- tcmd->buffer += cmd->request_bufflen;
- cmd->offset += cmd->request_bufflen;
-
- if (!tcmd->xfer_list.head) {
- scsi_tgt_transfer_response(cmd);
- return;
- }
-
- dprintk("cmd2 %p request_bufflen %u bufflen %u\n",
- cmd, cmd->request_bufflen, tcmd->bufflen);
-
- bio = bio_list_pop(&tcmd->xfer_list);
- BUG_ON(!bio);
-
- blk_rq_bio_prep(cmd->request->q, cmd->request, bio);
- cmd->request->data_len = bio->bi_size;
- err = scsi_tgt_init_cmd(cmd, GFP_ATOMIC);
- if (err) {
- cmd->result = DID_ERROR << 16;
- goto send_uspace_err;
- }
-
- if (scsi_tgt_transfer_data(cmd)) {
- cmd->result = DID_NO_CONNECT << 16;
- goto send_uspace_err;
- }
-}
-
-static int scsi_tgt_transfer_data(struct scsi_cmnd *cmd)
-{
- int err;
- struct Scsi_Host *host = scsi_tgt_cmd_to_host(cmd);
-
- err = host->hostt->transfer_data(cmd, scsi_tgt_data_transfer_done);
- switch (err) {
- case SCSI_MLQUEUE_HOST_BUSY:
- case SCSI_MLQUEUE_DEVICE_BUSY:
- return -EAGAIN;
- default:
- return 0;
- }
-}
-
static int scsi_tgt_copy_sense(struct scsi_cmnd *cmd, unsigned long uaddr,
unsigned len)
{
@@ -584,8 +459,9 @@ static struct request *tgt_cmd_hash_lookup(struct request_queue *q, u64 tag)
return rq;
}
-int scsi_tgt_kspace_exec(int host_no, u64 tag, int result, u32 len,
- unsigned long uaddr, u8 rw)
+int scsi_tgt_kspace_exec(int host_no, int result, u64 tag,
+ unsigned long uaddr, u32 len, unsigned long sense_uaddr,
+ u32 sense_len, u8 rw)
{
struct Scsi_Host *shost;
struct scsi_cmnd *cmd;
@@ -617,8 +493,9 @@ int scsi_tgt_kspace_exec(int host_no, u64 tag, int result, u32 len,
}
cmd = rq->special;
- dprintk("cmd %p result %d len %d bufflen %u %lu %x\n", cmd,
- result, len, cmd->request_bufflen, rq_data_dir(rq), cmd->cmnd[0]);
+ dprintk("cmd %p scb %x result %d len %d bufflen %u %lu %x\n",
+ cmd, cmd->cmnd[0], result, len, cmd->request_bufflen,
+ rq_data_dir(rq), cmd->cmnd[0]);
if (result == TASK_ABORTED) {
scsi_tgt_abort_cmd(shost, cmd);
@@ -629,36 +506,36 @@ int scsi_tgt_kspace_exec(int host_no, u64 tag, int result, u32 len,
* in the request_* values
*/
tcmd = cmd->request->end_io_data;
- tcmd->buffer = (void *)uaddr;
- tcmd->bufflen = len;
cmd->result = result;
- if (!tcmd->bufflen || cmd->request_buffer) {
- err = __scsi_tgt_transfer_response(cmd);
- goto done;
- }
+ if (cmd->result == SAM_STAT_CHECK_CONDITION)
+ scsi_tgt_copy_sense(cmd, sense_uaddr, sense_len);
- /*
- * TODO: Do we need to handle case where request does not
- * align with LLD.
- */
- err = scsi_map_user_pages(rq->end_io_data, cmd, rw);
- if (err) {
- eprintk("%p %d\n", cmd, err);
- err = -EAGAIN;
- goto done;
- }
+ if (len) {
+ err = scsi_map_user_pages(rq->end_io_data, cmd, uaddr, len, rw);
+ if (err) {
+ /*
+ * user-space daemon bugs or OOM
+ * TODO: we can do better for OOM.
+ */
+ struct scsi_tgt_queuedata *qdata;
+ struct list_head *head;
+ unsigned long flags;
- /* userspace failure */
- if (cmd->result) {
- if (status_byte(cmd->result) == CHECK_CONDITION)
- scsi_tgt_copy_sense(cmd, uaddr, len);
- err = __scsi_tgt_transfer_response(cmd);
- goto done;
- }
- /* ask the target LLD to transfer the data to the buffer */
- err = scsi_tgt_transfer_data(cmd);
+ eprintk("cmd %p ret %d uaddr %lx len %d rw %d\n",
+ cmd, err, uaddr, len, rw);
+
+ qdata = shost->uspace_req_q->queuedata;
+ head = &qdata->cmd_hash[cmd_hashfn(tcmd->tag)];
+
+ spin_lock_irqsave(&qdata->cmd_hash_lock, flags);
+ list_add(&tcmd->hash_list, head);
+ spin_unlock_irqrestore(&qdata->cmd_hash_lock, flags);
+ goto done;
+ }
+ }
+ err = scsi_tgt_transfer_response(cmd);
done:
scsi_host_put(shost);
return err;
diff --git a/drivers/scsi/scsi_tgt_priv.h b/drivers/scsi/scsi_tgt_priv.h
index 84488c51ff6..e9e6db1c417 100644
--- a/drivers/scsi/scsi_tgt_priv.h
+++ b/drivers/scsi/scsi_tgt_priv.h
@@ -18,8 +18,9 @@ extern int scsi_tgt_if_init(void);
extern int scsi_tgt_uspace_send_cmd(struct scsi_cmnd *cmd, struct scsi_lun *lun,
u64 tag);
extern int scsi_tgt_uspace_send_status(struct scsi_cmnd *cmd, u64 tag);
-extern int scsi_tgt_kspace_exec(int host_no, u64 tag, int result, u32 len,
- unsigned long uaddr, u8 rw);
+extern int scsi_tgt_kspace_exec(int host_no, int result, u64 tag,
+ unsigned long uaddr, u32 len, unsigned long sense_uaddr,
+ u32 sense_len, u8 rw);
extern int scsi_tgt_uspace_send_tsk_mgmt(int host_no, int function, u64 tag,
struct scsi_lun *scsilun, void *data);
extern int scsi_tgt_kspace_tsk_mgmt(int host_no, u64 mid, int result);
diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c
index 58afdb40170..14c4f065b2b 100644
--- a/drivers/scsi/scsi_transport_fc.c
+++ b/drivers/scsi/scsi_transport_fc.c
@@ -200,6 +200,8 @@ static const struct {
{ FC_PORTSPEED_2GBIT, "2 Gbit" },
{ FC_PORTSPEED_4GBIT, "4 Gbit" },
{ FC_PORTSPEED_10GBIT, "10 Gbit" },
+ { FC_PORTSPEED_8GBIT, "8 Gbit" },
+ { FC_PORTSPEED_16GBIT, "16 Gbit" },
{ FC_PORTSPEED_NOT_NEGOTIATED, "Not Negotiated" },
};
fc_bitfield_name_search(port_speed, fc_port_speed_names)
diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index aabaa0576ab..caf1836bbec 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -49,7 +49,7 @@ struct iscsi_internal {
struct class_device_attribute *session_attrs[ISCSI_SESSION_ATTRS + 1];
};
-static int iscsi_session_nr; /* sysfs session id for next new session */
+static atomic_t iscsi_session_nr; /* sysfs session id for next new session */
/*
* list of registered transports and lock that must
@@ -300,7 +300,7 @@ int iscsi_add_session(struct iscsi_cls_session *session, unsigned int target_id)
int err;
ihost = shost->shost_data;
- session->sid = iscsi_session_nr++;
+ session->sid = atomic_add_return(1, &iscsi_session_nr);
session->target_id = target_id;
snprintf(session->dev.bus_id, BUS_ID_SIZE, "session%u",
@@ -1419,6 +1419,8 @@ static __init int iscsi_transport_init(void)
printk(KERN_INFO "Loading iSCSI transport class v%s.\n",
ISCSI_TRANSPORT_VERSION);
+ atomic_set(&iscsi_session_nr, 0);
+
err = class_register(&iscsi_transport_class);
if (err)
return err;
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 5a8f55fea5f..00e46662296 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -58,16 +58,10 @@
#include <scsi/scsi_host.h>
#include <scsi/scsi_ioctl.h>
#include <scsi/scsicam.h>
+#include <scsi/sd.h>
#include "scsi_logging.h"
-/*
- * More than enough for everybody ;) The huge number of majors
- * is a leftover from 16bit dev_t days, we don't really need that
- * much numberspace.
- */
-#define SD_MAJORS 16
-
MODULE_AUTHOR("Eric Youngdale");
MODULE_DESCRIPTION("SCSI disk (sd) driver");
MODULE_LICENSE("GPL");
@@ -88,45 +82,9 @@ MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK12_MAJOR);
MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK13_MAJOR);
MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK14_MAJOR);
MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK15_MAJOR);
-
-/*
- * This is limited by the naming scheme enforced in sd_probe,
- * add another character to it if you really need more disks.
- */
-#define SD_MAX_DISKS (((26 * 26) + 26 + 1) * 26)
-
-/*
- * Time out in seconds for disks and Magneto-opticals (which are slower).
- */
-#define SD_TIMEOUT (30 * HZ)
-#define SD_MOD_TIMEOUT (75 * HZ)
-
-/*
- * Number of allowed retries
- */
-#define SD_MAX_RETRIES 5
-#define SD_PASSTHROUGH_RETRIES 1
-
-/*
- * Size of the initial data buffer for mode and read capacity data
- */
-#define SD_BUF_SIZE 512
-
-struct scsi_disk {
- struct scsi_driver *driver; /* always &sd_template */
- struct scsi_device *device;
- struct class_device cdev;
- struct gendisk *disk;
- unsigned int openers; /* protected by BKL for now, yuck */
- sector_t capacity; /* size in 512-byte sectors */
- u32 index;
- u8 media_present;
- u8 write_prot;
- unsigned WCE : 1; /* state of disk WCE bit */
- unsigned RCD : 1; /* state of disk RCD bit, unused */
- unsigned DPOFUA : 1; /* state of disk DPOFUA bit */
-};
-#define to_scsi_disk(obj) container_of(obj,struct scsi_disk,cdev)
+MODULE_ALIAS_SCSI_DEVICE(TYPE_DISK);
+MODULE_ALIAS_SCSI_DEVICE(TYPE_MOD);
+MODULE_ALIAS_SCSI_DEVICE(TYPE_RBC);
static DEFINE_IDR(sd_index_idr);
static DEFINE_SPINLOCK(sd_index_lock);
@@ -136,20 +94,6 @@ static DEFINE_SPINLOCK(sd_index_lock);
* object after last put) */
static DEFINE_MUTEX(sd_ref_mutex);
-static int sd_revalidate_disk(struct gendisk *disk);
-static void sd_rw_intr(struct scsi_cmnd * SCpnt);
-
-static int sd_probe(struct device *);
-static int sd_remove(struct device *);
-static void sd_shutdown(struct device *dev);
-static void sd_rescan(struct device *);
-static int sd_init_command(struct scsi_cmnd *);
-static int sd_issue_flush(struct device *, sector_t *);
-static void sd_prepare_flush(request_queue_t *, struct request *);
-static void sd_read_capacity(struct scsi_disk *sdkp, char *diskname,
- unsigned char *buffer);
-static void scsi_disk_release(struct class_device *cdev);
-
static const char *sd_cache_types[] = {
"write through", "none", "write back",
"write back, no read (daft)"
@@ -199,13 +143,27 @@ static ssize_t sd_store_cache_type(struct class_device *cdev, const char *buf,
if (scsi_mode_select(sdp, 1, sp, 8, buffer_data, len, SD_TIMEOUT,
SD_MAX_RETRIES, &data, &sshdr)) {
if (scsi_sense_valid(&sshdr))
- scsi_print_sense_hdr(sdkp->disk->disk_name, &sshdr);
+ sd_print_sense_hdr(sdkp, &sshdr);
return -EINVAL;
}
sd_revalidate_disk(sdkp->disk);
return count;
}
+static ssize_t sd_store_manage_start_stop(struct class_device *cdev,
+ const char *buf, size_t count)
+{
+ struct scsi_disk *sdkp = to_scsi_disk(cdev);
+ struct scsi_device *sdp = sdkp->device;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EACCES;
+
+ sdp->manage_start_stop = simple_strtoul(buf, NULL, 10);
+
+ return count;
+}
+
static ssize_t sd_store_allow_restart(struct class_device *cdev, const char *buf,
size_t count)
{
@@ -238,6 +196,14 @@ static ssize_t sd_show_fua(struct class_device *cdev, char *buf)
return snprintf(buf, 20, "%u\n", sdkp->DPOFUA);
}
+static ssize_t sd_show_manage_start_stop(struct class_device *cdev, char *buf)
+{
+ struct scsi_disk *sdkp = to_scsi_disk(cdev);
+ struct scsi_device *sdp = sdkp->device;
+
+ return snprintf(buf, 20, "%u\n", sdp->manage_start_stop);
+}
+
static ssize_t sd_show_allow_restart(struct class_device *cdev, char *buf)
{
struct scsi_disk *sdkp = to_scsi_disk(cdev);
@@ -251,6 +217,8 @@ static struct class_device_attribute sd_disk_attrs[] = {
__ATTR(FUA, S_IRUGO, sd_show_fua, NULL),
__ATTR(allow_restart, S_IRUGO|S_IWUSR, sd_show_allow_restart,
sd_store_allow_restart),
+ __ATTR(manage_start_stop, S_IRUGO|S_IWUSR, sd_show_manage_start_stop,
+ sd_store_manage_start_stop),
__ATTR_NULL,
};
@@ -267,6 +235,8 @@ static struct scsi_driver sd_template = {
.name = "sd",
.probe = sd_probe,
.remove = sd_remove,
+ .suspend = sd_suspend,
+ .resume = sd_resume,
.shutdown = sd_shutdown,
},
.rescan = sd_rescan,
@@ -371,15 +341,19 @@ static int sd_init_command(struct scsi_cmnd * SCpnt)
unsigned int this_count = SCpnt->request_bufflen >> 9;
unsigned int timeout = sdp->timeout;
- SCSI_LOG_HLQUEUE(1, printk("sd_init_command: disk=%s, block=%llu, "
- "count=%d\n", disk->disk_name,
- (unsigned long long)block, this_count));
+ SCSI_LOG_HLQUEUE(1, scmd_printk(KERN_INFO, SCpnt,
+ "sd_init_command: block=%llu, "
+ "count=%d\n",
+ (unsigned long long)block,
+ this_count));
if (!sdp || !scsi_device_online(sdp) ||
block + rq->nr_sectors > get_capacity(disk)) {
- SCSI_LOG_HLQUEUE(2, printk("Finishing %ld sectors\n",
- rq->nr_sectors));
- SCSI_LOG_HLQUEUE(2, printk("Retry with 0x%p\n", SCpnt));
+ SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
+ "Finishing %ld sectors\n",
+ rq->nr_sectors));
+ SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
+ "Retry with 0x%p\n", SCpnt));
return 0;
}
@@ -391,8 +365,8 @@ static int sd_init_command(struct scsi_cmnd * SCpnt)
/* printk("SCSI disk has been changed. Prohibiting further I/O.\n"); */
return 0;
}
- SCSI_LOG_HLQUEUE(2, printk("%s : block=%llu\n",
- disk->disk_name, (unsigned long long)block));
+ SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt, "block=%llu\n",
+ (unsigned long long)block));
/*
* If we have a 1K hardware sectorsize, prevent access to single
@@ -407,7 +381,8 @@ static int sd_init_command(struct scsi_cmnd * SCpnt)
*/
if (sdp->sector_size == 1024) {
if ((block & 1) || (rq->nr_sectors & 1)) {
- printk(KERN_ERR "sd: Bad block number requested");
+ scmd_printk(KERN_ERR, SCpnt,
+ "Bad block number requested\n");
return 0;
} else {
block = block >> 1;
@@ -416,7 +391,8 @@ static int sd_init_command(struct scsi_cmnd * SCpnt)
}
if (sdp->sector_size == 2048) {
if ((block & 3) || (rq->nr_sectors & 3)) {
- printk(KERN_ERR "sd: Bad block number requested");
+ scmd_printk(KERN_ERR, SCpnt,
+ "Bad block number requested\n");
return 0;
} else {
block = block >> 2;
@@ -425,7 +401,8 @@ static int sd_init_command(struct scsi_cmnd * SCpnt)
}
if (sdp->sector_size == 4096) {
if ((block & 7) || (rq->nr_sectors & 7)) {
- printk(KERN_ERR "sd: Bad block number requested");
+ scmd_printk(KERN_ERR, SCpnt,
+ "Bad block number requested\n");
return 0;
} else {
block = block >> 3;
@@ -442,13 +419,15 @@ static int sd_init_command(struct scsi_cmnd * SCpnt)
SCpnt->cmnd[0] = READ_6;
SCpnt->sc_data_direction = DMA_FROM_DEVICE;
} else {
- printk(KERN_ERR "sd: Unknown command %x\n", rq->cmd_flags);
+ scmd_printk(KERN_ERR, SCpnt, "Unknown command %x\n", rq->cmd_flags);
return 0;
}
- SCSI_LOG_HLQUEUE(2, printk("%s : %s %d/%ld 512 byte blocks.\n",
- disk->disk_name, (rq_data_dir(rq) == WRITE) ?
- "writing" : "reading", this_count, rq->nr_sectors));
+ SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
+ "%s %d/%ld 512 byte blocks.\n",
+ (rq_data_dir(rq) == WRITE) ?
+ "writing" : "reading", this_count,
+ rq->nr_sectors));
SCpnt->cmnd[1] = 0;
@@ -490,7 +469,8 @@ static int sd_init_command(struct scsi_cmnd * SCpnt)
* during operation and thus turned off
* use_10_for_rw.
*/
- printk(KERN_ERR "sd: FUA write on READ/WRITE(6) drive\n");
+ scmd_printk(KERN_ERR, SCpnt,
+ "FUA write on READ/WRITE(6) drive\n");
return 0;
}
@@ -549,7 +529,7 @@ static int sd_open(struct inode *inode, struct file *filp)
return -ENXIO;
- SCSI_LOG_HLQUEUE(3, printk("sd_open: disk=%s\n", disk->disk_name));
+ SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_open\n"));
sdev = sdkp->device;
@@ -619,7 +599,7 @@ static int sd_release(struct inode *inode, struct file *filp)
struct scsi_disk *sdkp = scsi_disk(disk);
struct scsi_device *sdev = sdkp->device;
- SCSI_LOG_HLQUEUE(3, printk("sd_release: disk=%s\n", disk->disk_name));
+ SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_release\n"));
if (!--sdkp->openers && sdev->removable) {
if (scsi_block_when_processing_errors(sdev))
@@ -732,8 +712,7 @@ static int sd_media_changed(struct gendisk *disk)
struct scsi_device *sdp = sdkp->device;
int retval;
- SCSI_LOG_HLQUEUE(3, printk("sd_media_changed: disk=%s\n",
- disk->disk_name));
+ SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_media_changed\n"));
if (!sdp->removable)
return 0;
@@ -786,9 +765,10 @@ not_present:
return 1;
}
-static int sd_sync_cache(struct scsi_device *sdp)
+static int sd_sync_cache(struct scsi_disk *sdkp)
{
int retries, res;
+ struct scsi_device *sdp = sdkp->device;
struct scsi_sense_hdr sshdr;
if (!scsi_device_online(sdp))
@@ -809,28 +789,27 @@ static int sd_sync_cache(struct scsi_device *sdp)
break;
}
- if (res) { printk(KERN_WARNING "FAILED\n status = %x, message = %02x, "
- "host = %d, driver = %02x\n ",
- status_byte(res), msg_byte(res),
- host_byte(res), driver_byte(res));
- if (driver_byte(res) & DRIVER_SENSE)
- scsi_print_sense_hdr("sd", &sshdr);
+ if (res) {
+ sd_print_result(sdkp, res);
+ if (driver_byte(res) & DRIVER_SENSE)
+ sd_print_sense_hdr(sdkp, &sshdr);
}
- return res;
+ if (res)
+ return -EIO;
+ return 0;
}
static int sd_issue_flush(struct device *dev, sector_t *error_sector)
{
int ret = 0;
- struct scsi_device *sdp = to_scsi_device(dev);
struct scsi_disk *sdkp = scsi_disk_get_from_dev(dev);
if (!sdkp)
return -ENODEV;
if (sdkp->WCE)
- ret = sd_sync_cache(sdp);
+ ret = sd_sync_cache(sdkp);
scsi_disk_put(sdkp);
return ret;
}
@@ -928,12 +907,14 @@ static void sd_rw_intr(struct scsi_cmnd * SCpnt)
sense_deferred = scsi_sense_is_deferred(&sshdr);
}
#ifdef CONFIG_SCSI_LOGGING
- SCSI_LOG_HLCOMPLETE(1, printk("sd_rw_intr: %s: res=0x%x\n",
- SCpnt->request->rq_disk->disk_name, result));
+ SCSI_LOG_HLCOMPLETE(1, scsi_print_result(SCpnt));
if (sense_valid) {
- SCSI_LOG_HLCOMPLETE(1, printk("sd_rw_intr: sb[respc,sk,asc,"
- "ascq]=%x,%x,%x,%x\n", sshdr.response_code,
- sshdr.sense_key, sshdr.asc, sshdr.ascq));
+ SCSI_LOG_HLCOMPLETE(1, scmd_printk(KERN_INFO, SCpnt,
+ "sd_rw_intr: sb[respc,sk,asc,"
+ "ascq]=%x,%x,%x,%x\n",
+ sshdr.response_code,
+ sshdr.sense_key, sshdr.asc,
+ sshdr.ascq));
}
#endif
if (driver_byte(result) != DRIVER_SENSE &&
@@ -1025,7 +1006,7 @@ static int media_not_present(struct scsi_disk *sdkp,
* spinup disk - called only in sd_revalidate_disk()
*/
static void
-sd_spinup_disk(struct scsi_disk *sdkp, char *diskname)
+sd_spinup_disk(struct scsi_disk *sdkp)
{
unsigned char cmd[10];
unsigned long spintime_expire = 0;
@@ -1069,9 +1050,10 @@ sd_spinup_disk(struct scsi_disk *sdkp, char *diskname)
if ((driver_byte(the_result) & DRIVER_SENSE) == 0) {
/* no sense, TUR either succeeded or failed
* with a status error */
- if(!spintime && !scsi_status_is_good(the_result))
- printk(KERN_NOTICE "%s: Unit Not Ready, "
- "error = 0x%x\n", diskname, the_result);
+ if(!spintime && !scsi_status_is_good(the_result)) {
+ sd_printk(KERN_NOTICE, sdkp, "Unit Not Ready\n");
+ sd_print_result(sdkp, the_result);
+ }
break;
}
@@ -1096,8 +1078,7 @@ sd_spinup_disk(struct scsi_disk *sdkp, char *diskname)
*/
} else if (sense_valid && sshdr.sense_key == NOT_READY) {
if (!spintime) {
- printk(KERN_NOTICE "%s: Spinning up disk...",
- diskname);
+ sd_printk(KERN_NOTICE, sdkp, "Spinning up disk...");
cmd[0] = START_STOP;
cmd[1] = 1; /* Return immediately */
memset((void *) &cmd[2], 0, 8);
@@ -1130,9 +1111,8 @@ sd_spinup_disk(struct scsi_disk *sdkp, char *diskname)
/* we don't understand the sense code, so it's
* probably pointless to loop */
if(!spintime) {
- printk(KERN_NOTICE "%s: Unit Not Ready, "
- "sense:\n", diskname);
- scsi_print_sense_hdr("", &sshdr);
+ sd_printk(KERN_NOTICE, sdkp, "Unit Not Ready\n");
+ sd_print_sense_hdr(sdkp, &sshdr);
}
break;
}
@@ -1151,8 +1131,7 @@ sd_spinup_disk(struct scsi_disk *sdkp, char *diskname)
* read disk capacity
*/
static void
-sd_read_capacity(struct scsi_disk *sdkp, char *diskname,
- unsigned char *buffer)
+sd_read_capacity(struct scsi_disk *sdkp, unsigned char *buffer)
{
unsigned char cmd[16];
int the_result, retries;
@@ -1191,18 +1170,12 @@ repeat:
} while (the_result && retries);
if (the_result && !longrc) {
- printk(KERN_NOTICE "%s : READ CAPACITY failed.\n"
- "%s : status=%x, message=%02x, host=%d, driver=%02x \n",
- diskname, diskname,
- status_byte(the_result),
- msg_byte(the_result),
- host_byte(the_result),
- driver_byte(the_result));
-
+ sd_printk(KERN_NOTICE, sdkp, "READ CAPACITY failed\n");
+ sd_print_result(sdkp, the_result);
if (driver_byte(the_result) & DRIVER_SENSE)
- scsi_print_sense_hdr("sd", &sshdr);
+ sd_print_sense_hdr(sdkp, &sshdr);
else
- printk("%s : sense not available. \n", diskname);
+ sd_printk(KERN_NOTICE, sdkp, "Sense not available.\n");
/* Set dirty bit for removable devices if not ready -
* sometimes drives will not report this properly. */
@@ -1218,16 +1191,10 @@ repeat:
return;
} else if (the_result && longrc) {
/* READ CAPACITY(16) has been failed */
- printk(KERN_NOTICE "%s : READ CAPACITY(16) failed.\n"
- "%s : status=%x, message=%02x, host=%d, driver=%02x \n",
- diskname, diskname,
- status_byte(the_result),
- msg_byte(the_result),
- host_byte(the_result),
- driver_byte(the_result));
- printk(KERN_NOTICE "%s : use 0xffffffff as device size\n",
- diskname);
-
+ sd_printk(KERN_NOTICE, sdkp, "READ CAPACITY(16) failed\n");
+ sd_print_result(sdkp, the_result);
+ sd_printk(KERN_NOTICE, sdkp, "Use 0xffffffff as device size\n");
+
sdkp->capacity = 1 + (sector_t) 0xffffffff;
goto got_data;
}
@@ -1238,14 +1205,14 @@ repeat:
if (buffer[0] == 0xff && buffer[1] == 0xff &&
buffer[2] == 0xff && buffer[3] == 0xff) {
if(sizeof(sdkp->capacity) > 4) {
- printk(KERN_NOTICE "%s : very big device. try to use"
- " READ CAPACITY(16).\n", diskname);
+ sd_printk(KERN_NOTICE, sdkp, "Very big device. "
+ "Trying to use READ CAPACITY(16).\n");
longrc = 1;
goto repeat;
}
- printk(KERN_ERR "%s: too big for this kernel. Use a "
- "kernel compiled with support for large block "
- "devices.\n", diskname);
+ sd_printk(KERN_ERR, sdkp, "Too big for this kernel. Use "
+ "a kernel compiled with support for large "
+ "block devices.\n");
sdkp->capacity = 0;
goto got_data;
}
@@ -1284,8 +1251,8 @@ repeat:
got_data:
if (sector_size == 0) {
sector_size = 512;
- printk(KERN_NOTICE "%s : sector size 0 reported, "
- "assuming 512.\n", diskname);
+ sd_printk(KERN_NOTICE, sdkp, "Sector size 0 reported, "
+ "assuming 512.\n");
}
if (sector_size != 512 &&
@@ -1293,8 +1260,8 @@ got_data:
sector_size != 2048 &&
sector_size != 4096 &&
sector_size != 256) {
- printk(KERN_NOTICE "%s : unsupported sector size "
- "%d.\n", diskname, sector_size);
+ sd_printk(KERN_NOTICE, sdkp, "Unsupported sector size %d.\n",
+ sector_size);
/*
* The user might want to re-format the drive with
* a supported sectorsize. Once this happens, it
@@ -1327,10 +1294,10 @@ got_data:
mb -= sz - 974;
sector_div(mb, 1950);
- printk(KERN_NOTICE "SCSI device %s: "
- "%llu %d-byte hdwr sectors (%llu MB)\n",
- diskname, (unsigned long long)sdkp->capacity,
- hard_sector, (unsigned long long)mb);
+ sd_printk(KERN_NOTICE, sdkp,
+ "%llu %d-byte hardware sectors (%llu MB)\n",
+ (unsigned long long)sdkp->capacity,
+ hard_sector, (unsigned long long)mb);
}
/* Rescale capacity to 512-byte units */
@@ -1362,8 +1329,7 @@ sd_do_mode_sense(struct scsi_device *sdp, int dbd, int modepage,
* called with buffer of length SD_BUF_SIZE
*/
static void
-sd_read_write_protect_flag(struct scsi_disk *sdkp, char *diskname,
- unsigned char *buffer)
+sd_read_write_protect_flag(struct scsi_disk *sdkp, unsigned char *buffer)
{
int res;
struct scsi_device *sdp = sdkp->device;
@@ -1371,7 +1337,7 @@ sd_read_write_protect_flag(struct scsi_disk *sdkp, char *diskname,
set_disk_ro(sdkp->disk, 0);
if (sdp->skip_ms_page_3f) {
- printk(KERN_NOTICE "%s: assuming Write Enabled\n", diskname);
+ sd_printk(KERN_NOTICE, sdkp, "Assuming Write Enabled\n");
return;
}
@@ -1403,15 +1369,16 @@ sd_read_write_protect_flag(struct scsi_disk *sdkp, char *diskname,
}
if (!scsi_status_is_good(res)) {
- printk(KERN_WARNING
- "%s: test WP failed, assume Write Enabled\n", diskname);
+ sd_printk(KERN_WARNING, sdkp,
+ "Test WP failed, assume Write Enabled\n");
} else {
sdkp->write_prot = ((data.device_specific & 0x80) != 0);
set_disk_ro(sdkp->disk, sdkp->write_prot);
- printk(KERN_NOTICE "%s: Write Protect is %s\n", diskname,
- sdkp->write_prot ? "on" : "off");
- printk(KERN_DEBUG "%s: Mode Sense: %02x %02x %02x %02x\n",
- diskname, buffer[0], buffer[1], buffer[2], buffer[3]);
+ sd_printk(KERN_NOTICE, sdkp, "Write Protect is %s\n",
+ sdkp->write_prot ? "on" : "off");
+ sd_printk(KERN_DEBUG, sdkp,
+ "Mode Sense: %02x %02x %02x %02x\n",
+ buffer[0], buffer[1], buffer[2], buffer[3]);
}
}
@@ -1420,8 +1387,7 @@ sd_read_write_protect_flag(struct scsi_disk *sdkp, char *diskname,
* called with buffer of length SD_BUF_SIZE
*/
static void
-sd_read_cache_type(struct scsi_disk *sdkp, char *diskname,
- unsigned char *buffer)
+sd_read_cache_type(struct scsi_disk *sdkp, unsigned char *buffer)
{
int len = 0, res;
struct scsi_device *sdp = sdkp->device;
@@ -1450,8 +1416,7 @@ sd_read_cache_type(struct scsi_disk *sdkp, char *diskname,
if (!data.header_length) {
modepage = 6;
- printk(KERN_ERR "%s: missing header in MODE_SENSE response\n",
- diskname);
+ sd_printk(KERN_ERR, sdkp, "Missing header in MODE_SENSE response\n");
}
/* that went OK, now ask for the proper length */
@@ -1478,13 +1443,12 @@ sd_read_cache_type(struct scsi_disk *sdkp, char *diskname,
int offset = data.header_length + data.block_descriptor_length;
if (offset >= SD_BUF_SIZE - 2) {
- printk(KERN_ERR "%s: malformed MODE SENSE response",
- diskname);
+ sd_printk(KERN_ERR, sdkp, "Malformed MODE SENSE response\n");
goto defaults;
}
if ((buffer[offset] & 0x3f) != modepage) {
- printk(KERN_ERR "%s: got wrong page\n", diskname);
+ sd_printk(KERN_ERR, sdkp, "Got wrong page\n");
goto defaults;
}
@@ -1498,14 +1462,13 @@ sd_read_cache_type(struct scsi_disk *sdkp, char *diskname,
sdkp->DPOFUA = (data.device_specific & 0x10) != 0;
if (sdkp->DPOFUA && !sdkp->device->use_10_for_rw) {
- printk(KERN_NOTICE "SCSI device %s: uses "
- "READ/WRITE(6), disabling FUA\n", diskname);
+ sd_printk(KERN_NOTICE, sdkp,
+ "Uses READ/WRITE(6), disabling FUA\n");
sdkp->DPOFUA = 0;
}
- printk(KERN_NOTICE "SCSI device %s: "
- "write cache: %s, read cache: %s, %s\n",
- diskname,
+ sd_printk(KERN_NOTICE, sdkp,
+ "Write cache: %s, read cache: %s, %s\n",
sdkp->WCE ? "enabled" : "disabled",
sdkp->RCD ? "disabled" : "enabled",
sdkp->DPOFUA ? "supports DPO and FUA"
@@ -1518,15 +1481,13 @@ bad_sense:
if (scsi_sense_valid(&sshdr) &&
sshdr.sense_key == ILLEGAL_REQUEST &&
sshdr.asc == 0x24 && sshdr.ascq == 0x0)
- printk(KERN_NOTICE "%s: cache data unavailable\n",
- diskname); /* Invalid field in CDB */
+ /* Invalid field in CDB */
+ sd_printk(KERN_NOTICE, sdkp, "Cache data unavailable\n");
else
- printk(KERN_ERR "%s: asking for cache data failed\n",
- diskname);
+ sd_printk(KERN_ERR, sdkp, "Asking for cache data failed\n");
defaults:
- printk(KERN_ERR "%s: assuming drive cache: write through\n",
- diskname);
+ sd_printk(KERN_ERR, sdkp, "Assuming drive cache: write through\n");
sdkp->WCE = 0;
sdkp->RCD = 0;
sdkp->DPOFUA = 0;
@@ -1544,7 +1505,8 @@ static int sd_revalidate_disk(struct gendisk *disk)
unsigned char *buffer;
unsigned ordered;
- SCSI_LOG_HLQUEUE(3, printk("sd_revalidate_disk: disk=%s\n", disk->disk_name));
+ SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp,
+ "sd_revalidate_disk\n"));
/*
* If the device is offline, don't try and read capacity or any
@@ -1555,8 +1517,8 @@ static int sd_revalidate_disk(struct gendisk *disk)
buffer = kmalloc(SD_BUF_SIZE, GFP_KERNEL | __GFP_DMA);
if (!buffer) {
- printk(KERN_WARNING "(sd_revalidate_disk:) Memory allocation "
- "failure.\n");
+ sd_printk(KERN_WARNING, sdkp, "sd_revalidate_disk: Memory "
+ "allocation failure.\n");
goto out;
}
@@ -1568,16 +1530,16 @@ static int sd_revalidate_disk(struct gendisk *disk)
sdkp->WCE = 0;
sdkp->RCD = 0;
- sd_spinup_disk(sdkp, disk->disk_name);
+ sd_spinup_disk(sdkp);
/*
* Without media there is no reason to ask; moreover, some devices
* react badly if we do.
*/
if (sdkp->media_present) {
- sd_read_capacity(sdkp, disk->disk_name, buffer);
- sd_read_write_protect_flag(sdkp, disk->disk_name, buffer);
- sd_read_cache_type(sdkp, disk->disk_name, buffer);
+ sd_read_capacity(sdkp, buffer);
+ sd_read_write_protect_flag(sdkp, buffer);
+ sd_read_cache_type(sdkp, buffer);
}
/*
@@ -1709,8 +1671,8 @@ static int sd_probe(struct device *dev)
dev_set_drvdata(dev, sdkp);
add_disk(gd);
- sdev_printk(KERN_NOTICE, sdp, "Attached scsi %sdisk %s\n",
- sdp->removable ? "removable " : "", gd->disk_name);
+ sd_printk(KERN_NOTICE, sdkp, "Attached SCSI %sdisk\n",
+ sdp->removable ? "removable " : "");
return 0;
@@ -1774,6 +1736,31 @@ static void scsi_disk_release(struct class_device *cdev)
kfree(sdkp);
}
+static int sd_start_stop_device(struct scsi_disk *sdkp, int start)
+{
+ unsigned char cmd[6] = { START_STOP }; /* START_VALID */
+ struct scsi_sense_hdr sshdr;
+ struct scsi_device *sdp = sdkp->device;
+ int res;
+
+ if (start)
+ cmd[4] |= 1; /* START */
+
+ if (!scsi_device_online(sdp))
+ return -ENODEV;
+
+ res = scsi_execute_req(sdp, cmd, DMA_NONE, NULL, 0, &sshdr,
+ SD_TIMEOUT, SD_MAX_RETRIES);
+ if (res) {
+ sd_printk(KERN_WARNING, sdkp, "START_STOP FAILED\n");
+ sd_print_result(sdkp, res);
+ if (driver_byte(res) & DRIVER_SENSE)
+ sd_print_sense_hdr(sdkp, &sshdr);
+ }
+
+ return res;
+}
+
/*
* Send a SYNCHRONIZE CACHE instruction down to the device through
* the normal SCSI command structure. Wait for the command to
@@ -1781,20 +1768,62 @@ static void scsi_disk_release(struct class_device *cdev)
*/
static void sd_shutdown(struct device *dev)
{
- struct scsi_device *sdp = to_scsi_device(dev);
struct scsi_disk *sdkp = scsi_disk_get_from_dev(dev);
if (!sdkp)
return; /* this can happen */
if (sdkp->WCE) {
- printk(KERN_NOTICE "Synchronizing SCSI cache for disk %s: \n",
- sdkp->disk->disk_name);
- sd_sync_cache(sdp);
+ sd_printk(KERN_NOTICE, sdkp, "Synchronizing SCSI cache\n");
+ sd_sync_cache(sdkp);
+ }
+
+ if (system_state != SYSTEM_RESTART && sdkp->device->manage_start_stop) {
+ sd_printk(KERN_NOTICE, sdkp, "Stopping disk\n");
+ sd_start_stop_device(sdkp, 0);
}
+
scsi_disk_put(sdkp);
}
+static int sd_suspend(struct device *dev, pm_message_t mesg)
+{
+ struct scsi_disk *sdkp = scsi_disk_get_from_dev(dev);
+ int ret;
+
+ if (!sdkp)
+ return 0; /* this can happen */
+
+ if (sdkp->WCE) {
+ sd_printk(KERN_NOTICE, sdkp, "Synchronizing SCSI cache\n");
+ ret = sd_sync_cache(sdkp);
+ if (ret)
+ return ret;
+ }
+
+ if (mesg.event == PM_EVENT_SUSPEND &&
+ sdkp->device->manage_start_stop) {
+ sd_printk(KERN_NOTICE, sdkp, "Stopping disk\n");
+ ret = sd_start_stop_device(sdkp, 0);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int sd_resume(struct device *dev)
+{
+ struct scsi_disk *sdkp = scsi_disk_get_from_dev(dev);
+
+ if (!sdkp->device->manage_start_stop)
+ return 0;
+
+ sd_printk(KERN_NOTICE, sdkp, "Starting disk\n");
+
+ return sd_start_stop_device(sdkp, 1);
+}
+
/**
* init_sd - entry point for this driver (both when built in or when
* a module).
@@ -1852,3 +1881,19 @@ static void __exit exit_sd(void)
module_init(init_sd);
module_exit(exit_sd);
+
+static void sd_print_sense_hdr(struct scsi_disk *sdkp,
+ struct scsi_sense_hdr *sshdr)
+{
+ sd_printk(KERN_INFO, sdkp, "");
+ scsi_show_sense_hdr(sshdr);
+ sd_printk(KERN_INFO, sdkp, "");
+ scsi_show_extd_sense(sshdr->asc, sshdr->ascq);
+}
+
+static void sd_print_result(struct scsi_disk *sdkp, int result)
+{
+ sd_printk(KERN_INFO, sdkp, "");
+ scsi_show_result(result);
+}
+
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 81e3bc7b02a..570977cf9ef 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -917,6 +917,8 @@ sg_ioctl(struct inode *inode, struct file *filp,
return result;
if (val < 0)
return -EINVAL;
+ val = min_t(int, val,
+ sdp->device->request_queue->max_sectors * 512);
if (val != sfp->reserve.bufflen) {
if (sg_res_in_use(sfp) || sfp->mmap_called)
return -EBUSY;
@@ -925,7 +927,8 @@ sg_ioctl(struct inode *inode, struct file *filp,
}
return 0;
case SG_GET_RESERVED_SIZE:
- val = (int) sfp->reserve.bufflen;
+ val = min_t(int, sfp->reserve.bufflen,
+ sdp->device->request_queue->max_sectors * 512);
return put_user(val, ip);
case SG_SET_COMMAND_Q:
result = get_user(val, ip);
@@ -1061,6 +1064,9 @@ sg_ioctl(struct inode *inode, struct file *filp,
if (sdp->detached)
return -ENODEV;
return scsi_ioctl(sdp->device, cmd_in, p);
+ case BLKSECTGET:
+ return put_user(sdp->device->request_queue->max_sectors * 512,
+ ip);
default:
if (read_only)
return -EPERM; /* don't know so take safe approach */
@@ -2339,6 +2345,7 @@ sg_add_sfp(Sg_device * sdp, int dev)
{
Sg_fd *sfp;
unsigned long iflags;
+ int bufflen;
sfp = kzalloc(sizeof(*sfp), GFP_ATOMIC | __GFP_NOWARN);
if (!sfp)
@@ -2369,7 +2376,9 @@ sg_add_sfp(Sg_device * sdp, int dev)
if (unlikely(sg_big_buff != def_reserved_size))
sg_big_buff = def_reserved_size;
- sg_build_reserve(sfp, sg_big_buff);
+ bufflen = min_t(int, sg_big_buff,
+ sdp->device->request_queue->max_sectors * 512);
+ sg_build_reserve(sfp, bufflen);
SCSI_LOG_TIMEOUT(3, printk("sg_add_sfp: bufflen=%d, k_use_sg=%d\n",
sfp->reserve.bufflen, sfp->reserve.k_use_sg));
return sfp;
diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c
index 1857d68e719..f9a52af7f5b 100644
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -62,6 +62,8 @@
MODULE_DESCRIPTION("SCSI cdrom (sr) driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_CDROM_MAJOR);
+MODULE_ALIAS_SCSI_DEVICE(TYPE_ROM);
+MODULE_ALIAS_SCSI_DEVICE(TYPE_WORM);
#define SR_DISKS 256
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index 98d8411bbcc..55bfeccf68a 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -89,6 +89,7 @@ MODULE_AUTHOR("Kai Makisara");
MODULE_DESCRIPTION("SCSI tape (st) driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS_CHARDEV_MAJOR(SCSI_TAPE_MAJOR);
+MODULE_ALIAS_SCSI_DEVICE(TYPE_TAPE);
/* Set 'perm' (4th argument) to 0 to disable module_param's definition
* of sysfs parameters (which module_param doesn't yet support).
diff --git a/include/scsi/iscsi_proto.h b/include/scsi/iscsi_proto.h
index 4a44278ed76..8d1e4e8026f 100644
--- a/include/scsi/iscsi_proto.h
+++ b/include/scsi/iscsi_proto.h
@@ -588,7 +588,17 @@ struct iscsi_reject {
#define VALUE_MAXLEN 255
#define TARGET_NAME_MAXLEN VALUE_MAXLEN
-#define DEFAULT_MAX_RECV_DATA_SEGMENT_LENGTH 8192
+#define ISCSI_DEF_MAX_RECV_SEG_LEN 8192
+#define ISCSI_MIN_MAX_RECV_SEG_LEN 512
+#define ISCSI_MAX_MAX_RECV_SEG_LEN 16777215
+
+#define ISCSI_DEF_FIRST_BURST_LEN 65536
+#define ISCSI_MIN_FIRST_BURST_LEN 512
+#define ISCSI_MAX_FIRST_BURST_LEN 16777215
+
+#define ISCSI_DEF_MAX_BURST_LEN 262144
+#define ISCSI_MIN_MAX_BURST_LEN 512
+#define ISCSI_MAX_MAX_BURST_LEN 16777215
/************************* RFC 3720 End *****************************/
diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h
index 5c0e9791441..9f8f80ab0c8 100644
--- a/include/scsi/scsi.h
+++ b/include/scsi/scsi.h
@@ -203,6 +203,7 @@ static inline int scsi_status_is_good(int status)
/*
* DEVICE TYPES
+ * Please keep them in 0x%02x format for $MODALIAS to work
*/
#define TYPE_DISK 0x00
diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h
index d6948d0e8cd..a2e0c103249 100644
--- a/include/scsi/scsi_cmnd.h
+++ b/include/scsi/scsi_cmnd.h
@@ -73,9 +73,6 @@ struct scsi_cmnd {
unsigned short use_sg; /* Number of pieces of scatter-gather */
unsigned short sglist_len; /* size of malloc'd scatter-gather list */
- /* offset in cmd we are at (for multi-transfer tgt cmds) */
- unsigned offset;
-
unsigned underflow; /* Return error if less than
this amount is transferred */
diff --git a/include/scsi/scsi_dbg.h b/include/scsi/scsi_dbg.h
index 3bbbfbe8cbf..5a43a4cd96c 100644
--- a/include/scsi/scsi_dbg.h
+++ b/include/scsi/scsi_dbg.h
@@ -5,14 +5,16 @@ struct scsi_cmnd;
struct scsi_sense_hdr;
extern void scsi_print_command(struct scsi_cmnd *);
-extern void scsi_print_sense_hdr(const char *, struct scsi_sense_hdr *);
extern void __scsi_print_command(unsigned char *);
-extern void scsi_print_sense(const char *, struct scsi_cmnd *);
+extern void scsi_show_extd_sense(unsigned char, unsigned char);
+extern void scsi_show_sense_hdr(struct scsi_sense_hdr *);
+extern void scsi_print_sense_hdr(const char *, struct scsi_sense_hdr *);
+extern void scsi_print_sense(char *, struct scsi_cmnd *);
extern void __scsi_print_sense(const char *name,
const unsigned char *sense_buffer,
int sense_len);
-extern void scsi_print_driverbyte(int);
-extern void scsi_print_hostbyte(int);
+extern void scsi_show_result(int);
+extern void scsi_print_result(struct scsi_cmnd *);
extern void scsi_print_status(unsigned char);
extern const char *scsi_sense_key_string(unsigned char);
extern const char *scsi_extd_sense_format(unsigned char, unsigned char);
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index 9dd37e2f5a8..2f3c5b8b1d6 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -5,6 +5,7 @@
#include <linux/list.h>
#include <linux/spinlock.h>
#include <linux/workqueue.h>
+#include <linux/blkdev.h>
#include <asm/atomic.h>
struct request_queue;
@@ -119,6 +120,7 @@ struct scsi_device {
unsigned use_192_bytes_for_3f:1; /* ask for 192 bytes from page 0x3f */
unsigned no_start_on_add:1; /* do not issue start on add */
unsigned allow_restart:1; /* issue START_UNIT in error handler */
+ unsigned manage_start_stop:1; /* Let HLD (sd) manage start/stop */
unsigned no_uld_attach:1; /* disable connecting to upper level drivers */
unsigned select_no_atn:1;
unsigned fix_capacity:1; /* READ_CAPACITY is too high by 1 */
@@ -154,8 +156,11 @@ struct scsi_device {
#define sdev_printk(prefix, sdev, fmt, a...) \
dev_printk(prefix, &(sdev)->sdev_gendev, fmt, ##a)
-#define scmd_printk(prefix, scmd, fmt, a...) \
- dev_printk(prefix, &(scmd)->device->sdev_gendev, fmt, ##a)
+#define scmd_printk(prefix, scmd, fmt, a...) \
+ (scmd)->request->rq_disk ? \
+ sdev_printk(prefix, (scmd)->device, "[%s] " fmt, \
+ (scmd)->request->rq_disk->disk_name, ##a) : \
+ sdev_printk(prefix, (scmd)->device, fmt, ##a)
enum scsi_target_state {
STARGET_RUNNING = 1,
@@ -353,4 +358,9 @@ static inline int scsi_device_qas(struct scsi_device *sdev)
return 0;
return sdev->inquiry[56] & 0x02;
}
+
+#define MODULE_ALIAS_SCSI_DEVICE(type) \
+ MODULE_ALIAS("scsi:t-" __stringify(type) "*")
+#define SCSI_DEVICE_MODALIAS_FMT "scsi:t-0x%02x"
+
#endif /* _SCSI_SCSI_DEVICE_H */
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
index 7f1f411d07a..68f461b7a83 100644
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -129,6 +129,11 @@ struct scsi_host_template {
* the LLD. When the driver is finished processing the command
* the done callback is invoked.
*
+ * This is called to inform the LLD to transfer
+ * cmd->request_bufflen bytes. The cmd->use_sg speciefies the
+ * number of scatterlist entried in the command and
+ * cmd->request_buffer contains the scatterlist.
+ *
* return values: see queuecommand
*
* If the LLD accepts the cmd, it should set the result to an
@@ -139,20 +144,6 @@ struct scsi_host_template {
/* TODO: rename */
int (* transfer_response)(struct scsi_cmnd *,
void (*done)(struct scsi_cmnd *));
- /*
- * This is called to inform the LLD to transfer cmd->request_bufflen
- * bytes of the cmd at cmd->offset in the cmd. The cmd->use_sg
- * speciefies the number of scatterlist entried in the command
- * and cmd->request_buffer contains the scatterlist.
- *
- * If the command cannot be processed in one transfer_data call
- * becuase a scatterlist within the LLD's limits cannot be
- * created then transfer_data will be called multiple times.
- * It is initially called from process context, and later
- * calls are from the interrup context.
- */
- int (* transfer_data)(struct scsi_cmnd *,
- void (*done)(struct scsi_cmnd *));
/* Used as callback for the completion of task management request. */
int (* tsk_mgmt_response)(u64 mid, int result);
@@ -335,6 +326,19 @@ struct scsi_host_template {
int (*proc_info)(struct Scsi_Host *, char *, char **, off_t, int, int);
/*
+ * This is an optional routine that allows the transport to become
+ * involved when a scsi io timer fires. The return value tells the
+ * timer routine how to finish the io timeout handling:
+ * EH_HANDLED: I fixed the error, please complete the command
+ * EH_RESET_TIMER: I need more time, reset the timer and
+ * begin counting again
+ * EH_NOT_HANDLED Begin normal error recovery
+ *
+ * Status: OPTIONAL
+ */
+ enum scsi_eh_timer_return (* eh_timed_out)(struct scsi_cmnd *);
+
+ /*
* suspend support
*/
int (*resume)(struct scsi_device *);
diff --git a/include/scsi/scsi_tgt_if.h b/include/scsi/scsi_tgt_if.h
index 07d6e77ae89..4cf9dff29a2 100644
--- a/include/scsi/scsi_tgt_if.h
+++ b/include/scsi/scsi_tgt_if.h
@@ -45,11 +45,13 @@ struct tgt_event {
/* user-> kernel */
struct {
int host_no;
- uint32_t len;
int result;
+ aligned_u64 tag;
aligned_u64 uaddr;
+ aligned_u64 sense_uaddr;
+ uint32_t len;
+ uint32_t sense_len;
uint8_t rw;
- aligned_u64 tag;
} cmd_rsp;
struct {
int host_no;
diff --git a/include/scsi/scsi_transport_fc.h b/include/scsi/scsi_transport_fc.h
index 798f7c7ee42..1e797308640 100644
--- a/include/scsi/scsi_transport_fc.h
+++ b/include/scsi/scsi_transport_fc.h
@@ -108,6 +108,8 @@ enum fc_port_state {
#define FC_PORTSPEED_2GBIT 2
#define FC_PORTSPEED_4GBIT 4
#define FC_PORTSPEED_10GBIT 8
+#define FC_PORTSPEED_8GBIT 0x10
+#define FC_PORTSPEED_16GBIT 0x20
#define FC_PORTSPEED_NOT_NEGOTIATED (1 << 15) /* Speed not established */
/*
diff --git a/include/scsi/sd.h b/include/scsi/sd.h
new file mode 100644
index 00000000000..5261488e110
--- /dev/null
+++ b/include/scsi/sd.h
@@ -0,0 +1,72 @@
+#ifndef _SCSI_DISK_H
+#define _SCSI_DISK_H
+
+/*
+ * More than enough for everybody ;) The huge number of majors
+ * is a leftover from 16bit dev_t days, we don't really need that
+ * much numberspace.
+ */
+#define SD_MAJORS 16
+
+/*
+ * This is limited by the naming scheme enforced in sd_probe,
+ * add another character to it if you really need more disks.
+ */
+#define SD_MAX_DISKS (((26 * 26) + 26 + 1) * 26)
+
+/*
+ * Time out in seconds for disks and Magneto-opticals (which are slower).
+ */
+#define SD_TIMEOUT (30 * HZ)
+#define SD_MOD_TIMEOUT (75 * HZ)
+
+/*
+ * Number of allowed retries
+ */
+#define SD_MAX_RETRIES 5
+#define SD_PASSTHROUGH_RETRIES 1
+
+/*
+ * Size of the initial data buffer for mode and read capacity data
+ */
+#define SD_BUF_SIZE 512
+
+struct scsi_disk {
+ struct scsi_driver *driver; /* always &sd_template */
+ struct scsi_device *device;
+ struct class_device cdev;
+ struct gendisk *disk;
+ unsigned int openers; /* protected by BKL for now, yuck */
+ sector_t capacity; /* size in 512-byte sectors */
+ u32 index;
+ u8 media_present;
+ u8 write_prot;
+ unsigned WCE : 1; /* state of disk WCE bit */
+ unsigned RCD : 1; /* state of disk RCD bit, unused */
+ unsigned DPOFUA : 1; /* state of disk DPOFUA bit */
+};
+#define to_scsi_disk(obj) container_of(obj,struct scsi_disk,cdev)
+
+static int sd_revalidate_disk(struct gendisk *disk);
+static void sd_rw_intr(struct scsi_cmnd * SCpnt);
+static int sd_probe(struct device *);
+static int sd_remove(struct device *);
+static void sd_shutdown(struct device *dev);
+static int sd_suspend(struct device *dev, pm_message_t state);
+static int sd_resume(struct device *dev);
+static void sd_rescan(struct device *);
+static int sd_init_command(struct scsi_cmnd *);
+static int sd_issue_flush(struct device *, sector_t *);
+static void sd_prepare_flush(request_queue_t *, struct request *);
+static void sd_read_capacity(struct scsi_disk *sdkp, unsigned char *buffer);
+static void scsi_disk_release(struct class_device *cdev);
+static void sd_print_sense_hdr(struct scsi_disk *, struct scsi_sense_hdr *);
+static void sd_print_result(struct scsi_disk *, int);
+
+#define sd_printk(prefix, sdsk, fmt, a...) \
+ (sdsk)->disk ? \
+ sdev_printk(prefix, (sdsk)->device, "[%s] " fmt, \
+ (sdsk)->disk->disk_name, ##a) : \
+ sdev_printk(prefix, (sdsk)->device, fmt, ##a)
+
+#endif /* _SCSI_DISK_H */