diff options
| author | Mike McCormack <mikem@ring3k.org> | 2010-01-23 02:09:26 -0800 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2010-01-23 02:09:26 -0800 |
| commit | 2ca4231de7f7a5fd7137bac152030ba71f15e8c3 (patch) | |
| tree | 681b53327e45e3843b9aaa4e049ff9400f19c781 | |
| parent | 8e1e8a4779cb23c1d9f51e9223795e07ec54d77a (diff) | |
sky2: Enable/disable WOL per hardware device
Y2_HW_WOL_ON/Y2_HW_WOL_OFF should be set and cleared per chip,
not per port. On dual port cards, Y2_HW_WOL_ON should be
enabled if either sky2 port has WOL enabled.
Found while reviewing code for a WOL regression, though this is
probably not the cause of the regression.
Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
| -rw-r--r-- | drivers/net/sky2.c | 29 |
1 files changed, 22 insertions, 7 deletions
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 37f486b65f6..02d0b42e436 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -3228,6 +3228,27 @@ static inline u8 sky2_wol_supported(const struct sky2_hw *hw) return sky2_is_copper(hw) ? (WAKE_PHY | WAKE_MAGIC) : 0; } +static void sky2_hw_set_wol(struct sky2_hw *hw) +{ + int wol = 0; + int i; + + for (i = 0; i < hw->ports; i++) { + struct net_device *dev = hw->dev[i]; + struct sky2_port *sky2 = netdev_priv(dev); + + if (sky2->wol) + wol = 1; + } + + if (hw->chip_id == CHIP_ID_YUKON_EC_U || + hw->chip_id == CHIP_ID_YUKON_EX || + hw->chip_id == CHIP_ID_YUKON_FE_P) + sky2_write32(hw, B0_CTST, wol ? Y2_HW_WOL_ON : Y2_HW_WOL_OFF); + + device_set_wakeup_enable(&hw->pdev->dev, wol); +} + static void sky2_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) { const struct sky2_port *sky2 = netdev_priv(dev); @@ -3247,13 +3268,7 @@ static int sky2_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) sky2->wol = wol->wolopts; - if (hw->chip_id == CHIP_ID_YUKON_EC_U || - hw->chip_id == CHIP_ID_YUKON_EX || - hw->chip_id == CHIP_ID_YUKON_FE_P) - sky2_write32(hw, B0_CTST, sky2->wol - ? Y2_HW_WOL_ON : Y2_HW_WOL_OFF); - - device_set_wakeup_enable(&hw->pdev->dev, sky2->wol); + sky2_hw_set_wol(hw); if (!netif_running(dev)) sky2_wol_init(sky2); |