Merge master.kernel.org:/home/rmk/linux-2.6-arm

53 files changed, 3573 insertions, 491 deletions

diff --git a/Documentation/arm/Samsung-S3C24XX/Overview.txt b/Documentation/arm/Samsung-S3C24XX/Overview.txt
index 3af4d29a893..89aa89d526a 100644
--- a/Documentation/arm/Samsung-S3C24XX/Overview.txt
+++ b/Documentation/arm/Samsung-S3C24XX/Overview.txt
@@ -81,7 +81,8 @@ Adding New Machines
 
   Any large scale modifications, or new drivers should be discussed
   on the ARM kernel mailing list (linux-arm-kernel) before being
-  attempted.
+  attempted. See http://www.arm.linux.org.uk/mailinglists/ for the
+  mailing list information.
 
 
 NAND
@@ -120,6 +121,43 @@ Clock Management
   various clock units
 
 
+Platform Data
+-------------
+
+  Whenever a device has platform specific data that is specified
+  on a per-machine basis, care should be taken to ensure the
+  following:
+
+    1) that default data is not left in the device to confuse the
+       driver if a machine does not set it at startup
+
+    2) the data should (if possible) be marked as __initdata,
+       to ensure that the data is thrown away if the machine is
+       not the one currently in use.
+
+       The best way of doing this is to make a function that
+       kmalloc()s an area of memory, and copies the __initdata
+       and then sets the relevant device's platform data. Making
+       the function `__init` takes care of ensuring it is discarded
+       with the rest of the initialisation code
+
+       static __init void s3c24xx_xxx_set_platdata(struct xxx_data *pd)
+       {
+           struct s3c2410_xxx_mach_info *npd;
+
+	   npd = kmalloc(sizeof(struct s3c2410_xxx_mach_info), GFP_KERNEL);
+	   if (npd) {
+	      memcpy(npd, pd, sizeof(struct s3c2410_xxx_mach_info));
+	      s3c_device_xxx.dev.platform_data = npd;
+	   } else {
+              printk(KERN_ERR "no memory for xxx platform data\n");
+	   }
+	}
+
+	Note, since the code is marked as __init, it should not be
+	exported outside arch/arm/mach-s3c2410/, or exported to
+	modules via EXPORT_SYMBOL() and related functions.
+
 Port Contributors
 -----------------
 
@@ -149,6 +187,7 @@ Document Changes
   06 Mar 2005 - BJD - Added Christer Weinigel
   08 Mar 2005 - BJD - Added LCVR to list of people, updated introduction
   08 Mar 2005 - BJD - Added section on adding machines
+  09 Sep 2005 - BJD - Added section on platform data
 
 Document Author
 ---------------
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 682367bd0f6..dc6d8342e5e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -194,6 +194,13 @@ config ARCH_VERSATILE
 	help
 	  This enables support for ARM Ltd Versatile board.
 
+config ARCH_REALVIEW
+	bool "RealView"
+	select ARM_AMBA
+	select ICST307
+	help
+	  This enables support for ARM Ltd RealView boards.
+
 config ARCH_IMX
 	bool "IMX"
 
@@ -244,6 +251,8 @@ source "arch/arm/mach-versatile/Kconfig"
 
 source "arch/arm/mach-aaec2000/Kconfig"
 
+source "arch/arm/mach-realview/Kconfig"
+
 # Definitions to make life easier
 config ARCH_ACORN
 	bool
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 64cf480b0b0..d80749ae2a7 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -99,6 +99,7 @@ textaddr-$(CONFIG_ARCH_FORTUNET)   := 0xc0008000
  machine-$(CONFIG_ARCH_IMX)	   := imx
  machine-$(CONFIG_ARCH_H720X)	   := h720x
  machine-$(CONFIG_ARCH_AAEC2000)   := aaec2000
+ machine-$(CONFIG_ARCH_REALVIEW)   := realview
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)
 # This is what happens if you forget the IOCS16 line.
diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig
index c279e41ed10..f74c926beb4 100644
--- a/arch/arm/configs/ixp4xx_defconfig
+++ b/arch/arm/configs/ixp4xx_defconfig
@@ -104,7 +104,7 @@ CONFIG_ARCH_IXCDP1100=y
 CONFIG_ARCH_PRPMC1100=y
 CONFIG_ARCH_IXDP4XX=y
 CONFIG_CPU_IXP46X=y
-CONFIG_MACH_GTWX5715=y
+# CONFIG_MACH_GTWX5715 is not set
 
 #
 # IXP4xx Options
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 71e5b99e519..391f3ab3ff3 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -7,13 +7,27 @@
 lib-y		:= backtrace.o changebit.o csumipv6.o csumpartial.o   \
 		   csumpartialcopy.o csumpartialcopyuser.o clearbit.o \
 		   copy_page.o delay.o findbit.o memchr.o memcpy.o    \
-		   memset.o memzero.o setbit.o strncpy_from_user.o    \
-		   strnlen_user.o strchr.o strrchr.o testchangebit.o  \
-		   testclearbit.o testsetbit.o uaccess.o getuser.o    \
-		   putuser.o ashldi3.o ashrdi3.o lshrdi3.o muldi3.o   \
+		   memmove.o memset.o memzero.o setbit.o              \
+		   strncpy_from_user.o strnlen_user.o                 \
+		   strchr.o strrchr.o                                 \
+		   testchangebit.o testclearbit.o testsetbit.o        \
+		   getuser.o putuser.o clear_user.o                   \
+		   ashldi3.o ashrdi3.o lshrdi3.o muldi3.o             \
 		   ucmpdi2.o lib1funcs.o div64.o sha1.o               \
 		   io-readsb.o io-writesb.o io-readsl.o io-writesl.o
 
+# the code in uaccess.S is not preemption safe and
+# probably faster on ARMv3 only
+ifeq ($CONFIG_PREEMPT,y)
+  lib-y	+= copy_from_user.o copy_to_user.o
+else
+ifneq ($(CONFIG_CPU_32v3),y)
+  lib-y	+= copy_from_user.o copy_to_user.o
+else
+  lib-y	+= uaccess.o
+endif
+endif
+
 ifeq ($(CONFIG_CPU_32v3),y)
   lib-y	+= io-readsw-armv3.o io-writesw-armv3.o
 else
diff --git a/arch/arm/lib/clear_user.S b/arch/arm/lib/clear_user.S
new file mode 100644
index 00000000000..7ff9f831b3f
--- /dev/null
+++ b/arch/arm/lib/clear_user.S
@@ -0,0 +1,52 @@
+/*
+ *  linux/arch/arm/lib/clear_user.S
+ *
+ *  Copyright (C) 1995, 1996,1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+		.text
+
+/* Prototype: int __arch_clear_user(void *addr, size_t sz)
+ * Purpose  : clear some user memory
+ * Params   : addr - user memory address to clear
+ *          : sz   - number of bytes to clear
+ * Returns  : number of bytes NOT cleared
+ */
+ENTRY(__arch_clear_user)
+		stmfd	sp!, {r1, lr}
+		mov	r2, #0
+		cmp	r1, #4
+		blt	2f
+		ands	ip, r0, #3
+		beq	1f
+		cmp	ip, #2
+USER(		strbt	r2, [r0], #1)
+USER(		strlebt	r2, [r0], #1)
+USER(		strltbt	r2, [r0], #1)
+		rsb	ip, ip, #4
+		sub	r1, r1, ip		@  7  6  5  4  3  2  1
+1:		subs	r1, r1, #8		@ -1 -2 -3 -4 -5 -6 -7
+USER(		strplt	r2, [r0], #4)
+USER(		strplt	r2, [r0], #4)
+		bpl	1b
+		adds	r1, r1, #4		@  3  2  1  0 -1 -2 -3
+USER(		strplt	r2, [r0], #4)
+2:		tst	r1, #2			@ 1x 1x 0x 0x 1x 1x 0x
+USER(		strnebt	r2, [r0], #1)
+USER(		strnebt	r2, [r0], #1)
+		tst	r1, #1			@ x1 x0 x1 x0 x1 x0 x1
+USER(		strnebt	r2, [r0], #1)
+		mov	r0, #0
+		LOADREGS(fd,sp!, {r1, pc})
+
+		.section .fixup,"ax"
+		.align	0
+9001:		LOADREGS(fd,sp!, {r0, pc})
+		.previous
+
diff --git a/arch/arm/lib/copy_from_user.S b/arch/arm/lib/copy_from_user.S
new file mode 100644
index 00000000000..7497393a0e8
--- /dev/null
+++ b/arch/arm/lib/copy_from_user.S
@@ -0,0 +1,101 @@
+/*
+ *  linux/arch/arm/lib/copy_from_user.S
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Sep 29, 2005
+ *  Copyright:	MontaVista Software, Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * Prototype:
+ *
+ *	size_t __arch_copy_from_user(void *to, const void *from, size_t n)
+ *
+ * Purpose:
+ *
+ *	copy a block to kernel memory from user memory
+ *
+ * Params:
+ *
+ *	to = kernel memory
+ *	from = user memory
+ *	n = number of bytes to copy
+ *
+ * Return value:
+ *
+ *	Number of bytes NOT copied.
+ */
+
+	.macro ldr1w ptr reg abort
+100:	ldrt \reg, [\ptr], #4
+	.section __ex_table, "a"
+	.long 100b, \abort
+	.previous
+	.endm
+
+	.macro ldr4w ptr reg1 reg2 reg3 reg4 abort
+	ldr1w \ptr, \reg1, \abort
+	ldr1w \ptr, \reg2, \abort
+	ldr1w \ptr, \reg3, \abort
+	ldr1w \ptr, \reg4, \abort
+	.endm
+
+	.macro ldr8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
+	ldr4w \ptr, \reg1, \reg2, \reg3, \reg4, \abort
+	ldr4w \ptr, \reg5, \reg6, \reg7, \reg8, \abort
+	.endm
+
+	.macro ldr1b ptr reg cond=al abort
+100:	ldr\cond\()bt \reg, [\ptr], #1
+	.section __ex_table, "a"
+	.long 100b, \abort
+	.previous
+	.endm
+
+	.macro str1w ptr reg abort
+	str \reg, [\ptr], #4
+	.endm
+
+	.macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
+	stmia \ptr!, {\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8}
+	.endm
+
+	.macro str1b ptr reg cond=al abort
+	str\cond\()b \reg, [\ptr], #1
+	.endm
+
+	.macro enter reg1 reg2
+	mov	r3, #0
+	stmdb	sp!, {r0, r2, r3, \reg1, \reg2}
+	.endm
+
+	.macro exit reg1 reg2
+	add	sp, sp, #8
+	ldmfd	sp!, {r0, \reg1, \reg2}
+	.endm
+
+	.text
+
+ENTRY(__arch_copy_from_user)
+
+#include "copy_template.S"
+
+	.section .fixup,"ax"
+	.align 0
+	copy_abort_preamble
+	ldmfd	sp!, {r1, r2}
+	sub	r3, r0, r1
+	rsb	r1, r3, r2
+	str	r1, [sp]
+	bl	__memzero
+	ldr	r0, [sp], #4
+	copy_abort_end
+	.previous
+
diff --git a/arch/arm/lib/copy_template.S b/arch/arm/lib/copy_template.S
new file mode 100644
index 00000000000..838e435e492
--- /dev/null
+++ b/arch/arm/lib/copy_template.S
@@ -0,0 +1,255 @@
+/*
+ *  linux/arch/arm/lib/copy_template.s
+ *
+ *  Code template for optimized memory copy functions
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Sep 28, 2005
+ *  Copyright:	MontaVista Software, Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+/*
+ * This can be used to enable code to cacheline align the source pointer.
+ * Experiments on tested architectures (StrongARM and XScale) didn't show
+ * this a worthwhile thing to do.  That might be different in the future.
+ */
+//#define CALGN(code...)	code
+#define CALGN(code...)
+
+/*
+ * Theory of operation
+ * -------------------
+ *
+ * This file provides the core code for a forward memory copy used in
+ * the implementation of memcopy(), copy_to_user() and copy_from_user().
+ *
+ * The including file must define the following accessor macros
+ * according to the need of the given function:
+ *
+ * ldr1w ptr reg abort
+ *
+ *	This loads one word from 'ptr', stores it in 'reg' and increments
+ *	'ptr' to the next word. The 'abort' argument is used for fixup tables.
+ *
+ * ldr4w ptr reg1 reg2 reg3 reg4 abort
+ * ldr8w ptr, reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
+ *
+ *	This loads four or eight words starting from 'ptr', stores them
+ *	in provided registers and increments 'ptr' past those words.
+ *	The'abort' argument is used for fixup tables.
+ *
+ * ldr1b ptr reg cond abort
+ *
+ *	Similar to ldr1w, but it loads a byte and increments 'ptr' one byte.
+ *	It also must apply the condition code if provided, otherwise the
+ *	"al" condition is assumed by default.
+ *
+ * str1w ptr reg abort
+ * str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
+ * str1b ptr reg cond abort
+ *
+ *	Same as their ldr* counterparts, but data is stored to 'ptr' location
+ *	rather than being loaded.
+ *
+ * enter reg1 reg2
+ *
+ *	Preserve the provided registers on the stack plus any additional
+ *	data as needed by the implementation including this code. Called
+ *	upon code entry.
+ *
+ * exit reg1 reg2
+ *
+ *	Restore registers with the values previously saved with the
+ *	'preserv' macro. Called upon code termination.
+ */
+
+
+		enter	r4, lr
+
+		subs	r2, r2, #4
+		blt	8f
+		ands	ip, r0, #3
+	PLD(	pld	[r1, #0]		)
+		bne	9f
+		ands	ip, r1, #3
+		bne	10f
+
+1:		subs	r2, r2, #(28)
+		stmfd	sp!, {r5 - r8}
+		blt	5f
+
+	CALGN(	ands	ip, r1, #31		)
+	CALGN(	rsb	r3, ip, #32		)
+	CALGN(	sbcnes	r4, r3, r2		)  @ C is always set here
+	CALGN(	bcs	2f			)
+	CALGN(	adr	r4, 6f			)
+	CALGN(	subs	r2, r2, r3		)  @ C gets set
+	CALGN(	add	pc, r4, ip		)
+
+	PLD(	pld	[r1, #0]		)
+2:	PLD(	subs	r2, r2, #96		)
+	PLD(	pld	[r1, #28]		)
+	PLD(	blt	4f			)
+	PLD(	pld	[r1, #60]		)
+	PLD(	pld	[r1, #92]		)
+
+3:	PLD(	pld	[r1, #124]		)
+4:		ldr8w	r1, r3, r4, r5, r6, r7, r8, ip, lr, abort=20f
+		subs	r2, r2, #32
+		str8w	r0, r3, r4, r5, r6, r7, r8, ip, lr, abort=20f
+		bge	3b
+	PLD(	cmn	r2, #96			)
+	PLD(	bge	4b			)
+
+5:		ands	ip, r2, #28
+		rsb	ip, ip, #32
+		addne	pc, pc, ip		@ C is always clear here
+		b	7f
+6:		nop
+		ldr1w	r1, r3, abort=20f
+		ldr1w	r1, r4, abort=20f
+		ldr1w	r1, r5, abort=20f
+		ldr1w	r1, r6, abort=20f
+		ldr1w	r1, r7, abort=20f
+		ldr1w	r1, r8, abort=20f
+		ldr1w	r1, lr, abort=20f
+
+		add	pc, pc, ip
+		nop
+		nop
+		str1w	r0, r3, abort=20f
+		str1w	r0, r4, abort=20f
+		str1w	r0, r5, abort=20f
+		str1w	r0, r6, abort=20f
+		str1w	r0, r7, abort=20f
+		str1w	r0, r8, abort=20f
+		str1w	r0, lr, abort=20f
+
+	CALGN(	bcs	2b			)
+
+7:		ldmfd	sp!, {r5 - r8}
+
+8:		movs	r2, r2, lsl #31
+		ldr1b	r1, r3, ne, abort=21f
+		ldr1b	r1, r4, cs, abort=21f
+		ldr1b	r1, ip, cs, abort=21f
+		str1b	r0, r3, ne, abort=21f
+		str1b	r0, r4, cs, abort=21f
+		str1b	r0, ip, cs, abort=21f
+
+		exit	r4, pc
+
+9:		rsb	ip, ip, #4
+		cmp	ip, #2
+		ldr1b	r1, r3, gt, abort=21f
+		ldr1b	r1, r4, ge, abort=21f
+		ldr1b	r1, lr, abort=21f
+		str1b	r0, r3, gt, abort=21f
+		str1b	r0, r4, ge, abort=21f
+		subs	r2, r2, ip
+		str1b	r0, lr, abort=21f
+		blt	8b
+		ands	ip, r1, #3
+		beq	1b
+
+10:		bic	r1, r1, #3
+		cmp	ip, #2
+		ldr1w	r1, lr, abort=21f
+		beq	17f
+		bgt	18f
+
+
+		.macro	forward_copy_shift pull push
+
+		subs	r2, r2, #28
+		blt	14f
+
+	CALGN(	ands	ip, r1, #31		)
+	CALGN(	rsb	ip, ip, #32		)
+	CALGN(	sbcnes	r4, ip, r2		)  @ C is always set here
+	CALGN(	subcc	r2, r2, ip		)
+	CALGN(	bcc	15f			)
+
+11:		stmfd	sp!, {r5 - r9}
+
+	PLD(	pld	[r1, #0]		)
+	PLD(	subs	r2, r2, #96		)
+	PLD(	pld	[r1, #28]		)
+	PLD(	blt	13f			)
+	PLD(	pld	[r1, #60]		)
+	PLD(	pld	[r1, #92]		)
+
+12:	PLD(	pld	[r1, #124]		)
+13:		ldr4w	r1, r4, r5, r6, r7, abort=19f
+		mov	r3, lr, pull #\pull
+		subs	r2, r2, #32
+		ldr4w	r1, r8, r9, ip, lr, abort=19f
+		orr	r3, r3, r4, push #\push
+		mov	r4, r4, pull #\pull
+		orr	r4, r4, r5, push #\push
+		mov	r5, r5, pull #\pull
+		orr	r5, r5, r6, push #\push
+		mov	r6, r6, pull #\pull
+		orr	r6, r6, r7, push #\push
+		mov	r7, r7, pull #\pull
+		orr	r7, r7, r8, push #\push
+		mov	r8, r8, pull #\pull
+		orr	r8, r8, r9, push #\push
+		mov	r9, r9, pull #\pull
+		orr	r9, r9, ip, push #\push
+		mov	ip, ip, pull #\pull
+		orr	ip, ip, lr, push #\push
+		str8w	r0, r3, r4, r5, r6, r7, r8, r9, ip, , abort=19f
+		bge	12b
+	PLD(	cmn	r2, #96			)
+	PLD(	bge	13b			)
+
+		ldmfd	sp!, {r5 - r9}
+
+14:		ands	ip, r2, #28
+		beq	16f
+
+15:		mov	r3, lr, pull #\pull
+		ldr1w	r1, lr, abort=21f
+		subs	ip, ip, #4
+		orr	r3, r3, lr, push #\push
+		str1w	r0, r3, abort=21f
+		bgt	15b
+	CALGN(	cmp	r2, #0			)
+	CALGN(	bge	11b			)
+
+16:		sub	r1, r1, #(\push / 8)
+		b	8b
+
+		.endm
+
+
+		forward_copy_shift	pull=8	push=24
+
+17:		forward_copy_shift	pull=16	push=16
+
+18:		forward_copy_shift	pull=24	push=8
+
+
+/*
+ * Abort preanble and completion macros.
+ * If a fixup handler is required then those macros must surround it.
+ * It is assumed that the fixup code will handle the private part of
+ * the exit macro.
+ */
+
+	.macro	copy_abort_preamble
+19:	ldmfd	sp!, {r5 - r9}
+	b	21f
+20:	ldmfd	sp!, {r5 - r8}
+21:
+	.endm
+
+	.macro	copy_abort_end
+	ldmfd	sp!, {r4, pc}
+	.endm
+
diff --git a/arch/arm/lib/copy_to_user.S b/arch/arm/lib/copy_to_user.S
new file mode 100644
index 00000000000..4a6d8ea1402
--- /dev/null
+++ b/arch/arm/lib/copy_to_user.S
@@ -0,0 +1,101 @@
+/*
+ *  linux/arch/arm/lib/copy_to_user.S
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Sep 29, 2005
+ *  Copyright:	MontaVista Software, Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * Prototype:
+ *
+ *	size_t __arch_copy_to_user(void *to, const void *from, size_t n)
+ *
+ * Purpose:
+ *
+ *	copy a block to user memory from kernel memory
+ *
+ * Params:
+ *
+ *	to = user memory
+ *	from = kernel memory
+ *	n = number of bytes to copy
+ *
+ * Return value:
+ *
+ *	Number of bytes NOT copied.
+ */
+
+	.macro ldr1w ptr reg abort
+	ldr \reg, [\ptr], #4
+	.endm
+
+	.macro ldr4w ptr reg1 reg2 reg3 reg4 abort
+	ldmia \ptr!, {\reg1, \reg2, \reg3, \reg4}
+	.endm
+
+	.macro ldr8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
+	ldmia \ptr!, {\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8}
+	.endm
+
+	.macro ldr1b ptr reg cond=al abort
+	ldr\cond\()b \reg, [\ptr], #1
+	.endm
+
+	.macro str1w ptr reg abort
+100:	strt \reg, [\ptr], #4
+	.section __ex_table, "a"
+	.long 100b, \abort
+	.previous
+	.endm
+
+	.macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
+	str1w \ptr, \reg1, \abort
+	str1w \ptr, \reg2, \abort
+	str1w \ptr, \reg3, \abort
+	str1w \ptr, \reg4, \abort
+	str1w \ptr, \reg5, \abort
+	str1w \ptr, \reg6, \abort
+	str1w \ptr, \reg7, \abort
+	str1w \ptr, \reg8, \abort
+	.endm
+
+	.macro str1b ptr reg cond=al abort
+100:	str\cond\()bt \reg, [\ptr], #1
+	.section __ex_table, "a"
+	.long 100b, \abort
+	.previous
+	.endm
+
+	.macro enter reg1 reg2
+	mov	r3, #0
+	stmdb	sp!, {r0, r2, r3, \reg1, \reg2}
+	.endm
+
+	.macro exit reg1 reg2
+	add	sp, sp, #8
+	ldmfd	sp!, {r0, \reg1, \reg2}
+	.endm
+
+	.text
+
+ENTRY(__arch_copy_to_user)
+
+#include "copy_template.S"
+
+	.section .fixup,"ax"
+	.align 0
+	copy_abort_preamble
+	ldmfd	sp!, {r1, r2, r3}
+	sub	r0, r0, r1
+	rsb	r0, r0, r2
+	copy_abort_end
+	.previous
+
diff --git a/arch/arm/lib/memcpy.S b/arch/arm/lib/memcpy.S
index f5a593ceb8c..7e71d6708a8 100644
--- a/arch/arm/lib/memcpy.S
+++ b/arch/arm/lib/memcpy.S
@@ -1,393 +1,59 @@
 /*
  *  linux/arch/arm/lib/memcpy.S
  *
- *  Copyright (C) 1995-1999 Russell King
+ *  Author:	Nicolas Pitre
+ *  Created:	Sep 28, 2005
+ *  Copyright:	MontaVista Software, Inc.
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  ASM optimised string functions
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
  */
+
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 
-		.text
-
-#define ENTER	\
-		mov	ip,sp	;\
-		stmfd	sp!,{r0,r4-r9,fp,ip,lr,pc}	;\
-		sub	fp,ip,#4
-
-#define EXIT	\
-		LOADREGS(ea, fp, {r0, r4 - r9, fp, sp, pc})
-
-#define EXITEQ	\
-		LOADREGS(eqea, fp, {r0, r4 - r9, fp, sp, pc})
-
-/*
- * Prototype: void memcpy(void *to,const void *from,unsigned long n);
- */
-ENTRY(memcpy)
-ENTRY(memmove)
-		ENTER
-		cmp	r1, r0
-		bcc	23f
-		subs	r2, r2, #4
-		blt	6f
-	PLD(	pld	[r1, #0]		)
-		ands	ip, r0, #3
-		bne	7f
-		ands	ip, r1, #3
-		bne	8f
+	.macro ldr1w ptr reg abort
+	ldr \reg, [\ptr], #4
+	.endm
 
-1:		subs	r2, r2, #8
-		blt	5f
-		subs	r2, r2, #20
-		blt	4f
-	PLD(	pld	[r1, #28]		)
-	PLD(	subs	r2, r2, #64		)
-	PLD(	blt	3f			)
-2:	PLD(	pld	[r1, #60]		)
-	PLD(	pld	[r1, #92]		)
-		ldmia	r1!, {r3 - r9, ip}
-		subs	r2, r2, #32
-		stmgeia	r0!, {r3 - r9, ip}
-		ldmgeia	r1!, {r3 - r9, ip}
-		subges	r2, r2, #32
-		stmia	r0!, {r3 - r9, ip}
-		bge	2b
-3:	PLD(	ldmia	r1!, {r3 - r9, ip}	)
-	PLD(	adds	r2, r2, #32		)
-	PLD(	stmgeia	r0!, {r3 - r9, ip}	)
-	PLD(	ldmgeia	r1!, {r3 - r9, ip}	)
-	PLD(	subges	r2, r2, #32		)
-	PLD(	stmia	r0!, {r3 - r9, ip}	)
-4:		cmn	r2, #16
-		ldmgeia	r1!, {r3 - r6}
-		subge	r2, r2, #16
-		stmgeia	r0!, {r3 - r6}
-		adds	r2, r2, #20
-		ldmgeia	r1!, {r3 - r5}
-		subge	r2, r2, #12
-		stmgeia	r0!, {r3 - r5}
-5:		adds	r2, r2, #8
-		blt	6f
-		subs	r2, r2, #4
-		ldrlt	r3, [r1], #4
-		ldmgeia	r1!, {r4, r5}
-		subge	r2, r2, #4
-		strlt	r3, [r0], #4
-		stmgeia	r0!, {r4, r5}
+	.macro ldr4w ptr reg1 reg2 reg3 reg4 abort
+	ldmia \ptr!, {\reg1, \reg2, \reg3, \reg4}
+	.endm
 
-6:		adds	r2, r2, #4
-		EXITEQ
-		cmp	r2, #2
-		ldrb	r3, [r1], #1
-		ldrgeb	r4, [r1], #1
-		ldrgtb	r5, [r1], #1
-		strb	r3, [r0], #1
-		strgeb	r4, [r0], #1
-		strgtb	r5, [r0], #1
-		EXIT
+	.macro ldr8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
+	ldmia \ptr!, {\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8}
+	.endm
 
-7:		rsb	ip, ip, #4
-		cmp	ip, #2
-		ldrb	r3, [r1], #1
-		ldrgeb	r4, [r1], #1
-		ldrgtb	r5, [r1], #1
-		strb	r3, [r0], #1
-		strgeb	r4, [r0], #1
-		strgtb	r5, [r0], #1
-		subs	r2, r2, ip
-		blt	6b
-		ands	ip, r1, #3
-		beq	1b
+	.macro ldr1b ptr reg cond=al abort
+	ldr\cond\()b \reg, [\ptr], #1
+	.endm
 
-8:		bic	r1, r1, #3
-		ldr	r7, [r1], #4
-		cmp	ip, #2
-		bgt	18f
-		beq	13f
-		cmp	r2, #12
-		blt	11f
-	PLD(	pld	[r1, #12]		)
-		sub	r2, r2, #12
-	PLD(	subs	r2, r2, #32		)
-	PLD(	blt	10f			)
-	PLD(	pld	[r1, #28]		)
-9:	PLD(	pld	[r1, #44]		)
-10:		mov	r3, r7, pull #8
-		ldmia	r1!, {r4 - r7}
-		subs	r2, r2, #16
-		orr	r3, r3, r4, push #24
-		mov	r4, r4, pull #8
-		orr	r4, r4, r5, push #24
-		mov	r5, r5, pull #8
-		orr	r5, r5, r6, push #24
-		mov	r6, r6, pull #8
-		orr	r6, r6, r7, push #24
-		stmia	r0!, {r3 - r6}
-		bge	9b
-	PLD(	cmn	r2, #32			)
-	PLD(	bge	10b			)
-	PLD(	add	r2, r2, #32		)
-		adds	r2, r2, #12
-		blt	12f
-11:		mov	r3, r7, pull #8
-		ldr	r7, [r1], #4
-		subs	r2, r2, #4
-		orr	r3, r3, r7, push #24
-		str	r3, [r0], #4
-		bge	11b
-12:		sub	r1, r1, #3
-		b	6b
+	.macro str1w ptr reg abort
+	str \reg, [\ptr], #4
+	.endm
 
-13:		cmp	r2, #12
-		blt	16f
-	PLD(	pld	[r1, #12]		)
-		sub	r2, r2, #12
-	PLD(	subs	r2, r2, #32		)
-	PLD(	blt	15f			)
-	PLD(	pld	[r1, #28]		)
-14:	PLD(	pld	[r1, #44]		)
-15:		mov	r3, r7, pull #16
-		ldmia	r1!, {r4 - r7}
-		subs	r2, r2, #16
-		orr	r3, r3, r4, push #16
-		mov	r4, r4, pull #16
-		orr	r4, r4, r5, push #16
-		mov	r5, r5, pull #16
-		orr	r5, r5, r6, push #16
-		mov	r6, r6, pull #16
-		orr	r6, r6, r7, push #16
-		stmia	r0!, {r3 - r6}
-		bge	14b
-	PLD(	cmn	r2, #32			)
-	PLD(	bge	15b			)
-	PLD(	add	r2, r2, #32		)
-		adds	r2, r2, #12
-		blt	17f
-16:		mov	r3, r7, pull #16
-		ldr	r7, [r1], #4
-		subs	r2, r2, #4
-		orr	r3, r3, r7, push #16
-		str	r3, [r0], #4
-		bge	16b
-17:		sub	r1, r1, #2
-		b	6b
+	.macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
+	stmia \ptr!, {\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8}
+	.endm
 
-18:		cmp	r2, #12
-		blt	21f
-	PLD(	pld	[r1, #12]		)
-		sub	r2, r2, #12
-	PLD(	subs	r2, r2, #32		)
-	PLD(	blt	20f			)
-	PLD(	pld	[r1, #28]		)
-19:	PLD(	pld	[r1, #44]		)
-20:		mov	r3, r7, pull #24
-		ldmia	r1!, {r4 - r7}
-		subs	r2, r2, #16
-		orr	r3, r3, r4, push #8
-		mov	r4, r4, pull #24
-		orr	r4, r4, r5, push #8
-		mov	r5, r5, pull #24
-		orr	r5, r5, r6, push #8
-		mov	r6, r6, pull #24
-		orr	r6, r6, r7, push #8
-		stmia	r0!, {r3 - r6}
-		bge	19b
-	PLD(	cmn	r2, #32			)
-	PLD(	bge	20b			)
-	PLD(	add	r2, r2, #32		)
-		adds	r2, r2, #12
-		blt	22f
-21:		mov	r3, r7, pull #24
-		ldr	r7, [r1], #4
-		subs	r2, r2, #4
-		orr	r3, r3, r7, push #8
-		str	r3, [r0], #4
-		bge	21b
-22:		sub	r1, r1, #1
-		b	6b
+	.macro str1b ptr reg cond=al abort
+	str\cond\()b \reg, [\ptr], #1
+	.endm
 
+	.macro enter reg1 reg2
+	stmdb sp!, {r0, \reg1, \reg2}
+	.endm
 
-23:		add	r1, r1, r2
-		add	r0, r0, r2
-		subs	r2, r2, #4
-		blt	29f
-	PLD(	pld	[r1, #-4]		)
-		ands	ip, r0, #3
-		bne	30f
-		ands	ip, r1, #3
-		bne	31f
+	.macro exit reg1 reg2
+	ldmfd sp!, {r0, \reg1, \reg2}
+	.endm
 
-24:		subs	r2, r2, #8
-		blt	28f
-		subs	r2, r2, #20
-		blt	27f
-	PLD(	pld	[r1, #-32]		)
-	PLD(	subs	r2, r2, #64		)
-	PLD(	blt	26f			)
-25:	PLD(	pld	[r1, #-64]		)
-	PLD(	pld	[r1, #-96]		)
-		ldmdb	r1!, {r3 - r9, ip}
-		subs	r2, r2, #32
-		stmgedb	r0!, {r3 - r9, ip}
-		ldmgedb	r1!, {r3 - r9, ip}
-		subges	r2, r2, #32
-		stmdb	r0!, {r3 - r9, ip}
-		bge	25b
-26:	PLD(	ldmdb	r1!, {r3 - r9, ip}	)
-	PLD(	adds	r2, r2, #32		)
-	PLD(	stmgedb	r0!, {r3 - r9, ip}	)
-	PLD(	ldmgedb	r1!, {r3 - r9, ip}	)
-	PLD(	subges	r2, r2, #32		)
-	PLD(	stmdb	r0!, {r3 - r9, ip}	)
-27:		cmn	r2, #16
-		ldmgedb	r1!, {r3 - r6}
-		subge	r2, r2, #16
-		stmgedb	r0!, {r3 - r6}
-		adds	r2, r2, #20
-		ldmgedb	r1!, {r3 - r5}
-		subge	r2, r2, #12
-		stmgedb	r0!, {r3 - r5}
-28:		adds	r2, r2, #8
-		blt	29f
-		subs	r2, r2, #4
-		ldrlt	r3, [r1, #-4]!
-		ldmgedb	r1!, {r4, r5}
-		subge	r2, r2, #4
-		strlt	r3, [r0, #-4]!
-		stmgedb	r0!, {r4, r5}
+	.text
 
-29:		adds	r2, r2, #4
-		EXITEQ
-		cmp	r2, #2
-		ldrb	r3, [r1, #-1]!
-		ldrgeb	r4, [r1, #-1]!
-		ldrgtb	r5, [r1, #-1]!
-		strb	r3, [r0, #-1]!
-		strgeb	r4, [r0, #-1]!
-		strgtb	r5, [r0, #-1]!
-		EXIT
+/* Prototype: void *memcpy(void *dest, const void *src, size_t n); */
 
-30:		cmp	ip, #2
-		ldrb	r3, [r1, #-1]!
-		ldrgeb	r4, [r1, #-1]!
-		ldrgtb	r5, [r1, #-1]!
-		strb	r3, [r0, #-1]!
-		strgeb	r4, [r0, #-1]!
-		strgtb	r5, [r0, #-1]!
-		subs	r2, r2, ip
-		blt	29b
-		ands	ip, r1, #3
-		beq	24b
-
-31:		bic	r1, r1, #3
-		ldr	r3, [r1], #0
-		cmp	ip, #2
-		blt	41f
-		beq	36f
-		cmp	r2, #12
-		blt	34f
-	PLD(	pld	[r1, #-16]		)
-		sub	r2, r2, #12
-	PLD(	subs	r2, r2, #32		)
-	PLD(	blt	33f			)
-	PLD(	pld	[r1, #-32]		)
-32:	PLD(	pld	[r1, #-48]		)
-33:		mov	r7, r3, push #8
-		ldmdb	r1!, {r3, r4, r5, r6}
-		subs	r2, r2, #16
-		orr	r7, r7, r6, pull #24
-		mov	r6, r6, push #8
-		orr	r6, r6, r5, pull #24
-		mov	r5, r5, push #8
-		orr	r5, r5, r4, pull #24
-		mov	r4, r4, push #8
-		orr	r4, r4, r3, pull #24
-		stmdb	r0!, {r4, r5, r6, r7}
-		bge	32b
-	PLD(	cmn	r2, #32			)
-	PLD(	bge	33b			)
-	PLD(	add	r2, r2, #32		)
-		adds	r2, r2, #12
-		blt	35f
-34:		mov	ip, r3, push #8
-		ldr	r3, [r1, #-4]!
-		subs	r2, r2, #4
-		orr	ip, ip, r3, pull #24
-		str	ip, [r0, #-4]!
-		bge	34b
-35:		add	r1, r1, #3
-		b	29b
-
-36:		cmp	r2, #12
-		blt	39f
-	PLD(	pld	[r1, #-16]		)
-		sub	r2, r2, #12
-	PLD(	subs	r2, r2, #32		)
-	PLD(	blt	38f			)
-	PLD(	pld	[r1, #-32]		)
-37:	PLD(	pld	[r1, #-48]		)
-38:		mov	r7, r3, push #16
-		ldmdb	r1!, {r3, r4, r5, r6}
-		subs	r2, r2, #16
-		orr	r7, r7, r6, pull #16
-		mov	r6, r6, push #16
-		orr	r6, r6, r5, pull #16
-		mov	r5, r5, push #16
-		orr	r5, r5, r4, pull #16
-		mov	r4, r4, push #16
-		orr	r4, r4, r3, pull #16
-		stmdb	r0!, {r4, r5, r6, r7}
-		bge	37b
-	PLD(	cmn	r2, #32			)
-	PLD(	bge	38b			)
-	PLD(	add	r2, r2, #32		)
-		adds	r2, r2, #12
-		blt	40f
-39:		mov	ip, r3, push #16
-		ldr	r3, [r1, #-4]!
-		subs	r2, r2, #4
-		orr	ip, ip, r3, pull #16
-		str	ip, [r0, #-4]!
-		bge	39b
-40:		add	r1, r1, #2
-		b	29b
+ENTRY(memcpy)
 
-41:		cmp	r2, #12
-		blt	44f
-	PLD(	pld	[r1, #-16]		)
-		sub	r2, r2, #12
-	PLD(	subs	r2, r2, #32		)
-	PLD(	blt	43f			)
-	PLD(	pld	[r1, #-32]		)
-42:	PLD(	pld	[r1, #-48]		)
-43:		mov	r7, r3, push #24
-		ldmdb	r1!, {r3, r4, r5, r6}
-		subs	r2, r2, #16
-		orr	r7, r7, r6, pull #8
-		mov	r6, r6, push #24
-		orr	r6, r6, r5, pull #8
-		mov	r5, r5, push #24
-		orr	r5, r5, r4, pull #8
-		mov	r4, r4, push #24
-		orr	r4, r4, r3, pull #8
-		stmdb	r0!, {r4, r5, r6, r7}
-		bge	42b
-	PLD(	cmn	r2, #32			)
-	PLD(	bge	43b			)
-	PLD(	add	r2, r2, #32		)
-		adds	r2, r2, #12
-		blt	45f
-44:		mov	ip, r3, push #24
-		ldr	r3, [r1, #-4]!
-		subs	r2, r2, #4
-		orr	ip, ip, r3, pull #8
-		str	ip, [r0, #-4]!
-		bge	44b
-45:		add	r1, r1, #1
-		b	29b
+#include "copy_template.S"
 
diff --git a/arch/arm/lib/memmove.S b/arch/arm/lib/memmove.S
new file mode 100644
index 00000000000..ef7fddc14ac
--- /dev/null
+++ b/arch/arm/lib/memmove.S
@@ -0,0 +1,206 @@
+/*
+ *  linux/arch/arm/lib/memmove.S
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Sep 28, 2005
+ *  Copyright:	(C) MontaVista Software Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * This can be used to enable code to cacheline align the source pointer.
+ * Experiments on tested architectures (StrongARM and XScale) didn't show
+ * this a worthwhile thing to do.  That might be different in the future.
+ */
+//#define CALGN(code...)        code
+#define CALGN(code...)
+
+		.text
+
+/*
+ * Prototype: void *memmove(void *dest, const void *src, size_t n);
+ *
+ * Note:
+ *
+ * If the memory regions don't overlap, we simply branch to memcpy which is
+ * normally a bit faster. Otherwise the copy is done going downwards.  This
+ * is a transposition of the code from copy_template.S but with the copy
+ * occurring in the opposite direction.
+ */
+
+ENTRY(memmove)
+
+		subs	ip, r0, r1
+		cmphi	r2, ip
+		bls	memcpy
+
+		stmfd	sp!, {r0, r4, lr}
+		add	r1, r1, r2
+		add	r0, r0, r2
+		subs	r2, r2, #4
+		blt	8f
+		ands	ip, r0, #3
+	PLD(	pld	[r1, #-4]		)
+		bne	9f
+		ands	ip, r1, #3
+		bne	10f
+
+1:		subs	r2, r2, #(28)
+		stmfd	sp!, {r5 - r8}
+		blt	5f
+
+	CALGN(	ands	ip, r1, #31		)
+	CALGN(	sbcnes	r4, ip, r2		)  @ C is always set here
+	CALGN(	bcs	2f			)
+	CALGN(	adr	r4, 6f			)
+	CALGN(	subs	r2, r2, ip		)  @ C is set here
+	CALGN(	add	pc, r4, ip		)
+
+	PLD(	pld	[r1, #-4]		)
+2:	PLD(	subs	r2, r2, #96		)
+	PLD(	pld	[r1, #-32]		)
+	PLD(	blt	4f			)
+	PLD(	pld	[r1, #-64]		)
+	PLD(	pld	[r1, #-96]		)
+
+3:	PLD(	pld	[r1, #-128]		)
+4:		ldmdb	r1!, {r3, r4, r5, r6, r7, r8, ip, lr}
+		subs	r2, r2, #32
+		stmdb	r0!, {r3, r4, r5, r6, r7, r8, ip, lr}
+		bge	3b
+	PLD(	cmn	r2, #96			)
+	PLD(	bge	4b			)
+
+5:		ands	ip, r2, #28
+		rsb	ip, ip, #32
+		addne	pc, pc, ip		@ C is always clear here
+		b	7f
+6:		nop
+		ldr	r3, [r1, #-4]!
+		ldr	r4, [r1, #-4]!
+		ldr	r5, [r1, #-4]!
+		ldr	r6, [r1, #-4]!
+		ldr	r7, [r1, #-4]!
+		ldr	r8, [r1, #-4]!
+		ldr	lr, [r1, #-4]!
+
+		add	pc, pc, ip
+		nop
+		nop
+		str	r3, [r0, #-4]!
+		str	r4, [r0, #-4]!
+		str	r5, [r0, #-4]!
+		str	r6, [r0, #-4]!
+		str	r7, [r0, #-4]!
+		str	r8, [r0, #-4]!
+		str	lr, [r0, #-4]!
+
+	CALGN(	bcs	2b			)
+
+7:		ldmfd	sp!, {r5 - r8}
+
+8:		movs	r2, r2, lsl #31
+		ldrneb	r3, [r1, #-1]!
+		ldrcsb	r4, [r1, #-1]!
+		ldrcsb	ip, [r1, #-1]
+		strneb	r3, [r0, #-1]!
+		strcsb	r4, [r0, #-1]!
+		strcsb	ip, [r0, #-1]
+		ldmfd	sp!, {r0, r4, pc}
+
+9:		cmp	ip, #2
+		ldrgtb	r3, [r1, #-1]!
+		ldrgeb	r4, [r1, #-1]!
+		ldrb	lr, [r1, #-1]!
+		strgtb	r3, [r0, #-1]!
+		strgeb	r4, [r0, #-1]!
+		subs	r2, r2, ip
+		strb	lr, [r0, #-1]!
+		blt	8b
+		ands	ip, r1, #3
+		beq	1b
+
+10:		bic	r1, r1, #3
+		cmp	ip, #2
+		ldr	r3, [r1, #0]
+		beq	17f
+		blt	18f
+
+
+		.macro	backward_copy_shift push pull
+
+		subs	r2, r2, #28
+		blt	14f
+
+	CALGN(	ands	ip, r1, #31		)
+	CALGN(	rsb	ip, ip, #32		)
+	CALGN(	sbcnes	r4, ip, r2		)  @ C is always set here
+	CALGN(	subcc	r2, r2, ip		)
+	CALGN(	bcc	15f			)
+
+11:		stmfd	sp!, {r5 - r9}
+
+	PLD(	pld	[r1, #-4]		)
+	PLD(	subs	r2, r2, #96		)
+	PLD(	pld	[r1, #-32]		)
+	PLD(	blt	13f			)
+	PLD(	pld	[r1, #-64]		)
+	PLD(	pld	[r1, #-96]		)
+
+12:	PLD(	pld	[r1, #-128]		)
+13:		ldmdb   r1!, {r7, r8, r9, ip}
+		mov     lr, r3, push #\push
+		subs    r2, r2, #32
+		ldmdb   r1!, {r3, r4, r5, r6}
+		orr     lr, lr, ip, pull #\pull
+		mov     ip, ip, push #\push
+		orr     ip, ip, r9, pull #\pull
+		mov     r9, r9, push #\push
+		orr     r9, r9, r8, pull #\pull
+		mov     r8, r8, push #\push
+		orr     r8, r8, r7, pull #\pull
+		mov     r7, r7, push #\push
+		orr     r7, r7, r6, pull #\pull
+		mov     r6, r6, push #\push
+		orr     r6, r6, r5, pull #\pull
+		mov     r5, r5, push #\push
+		orr     r5, r5, r4, pull #\pull
+		mov     r4, r4, push #\push
+		orr     r4, r4, r3, pull #\pull
+		stmdb   r0!, {r4 - r9, ip, lr}
+		bge	12b
+	PLD(	cmn	r2, #96			)
+	PLD(	bge	13b			)
+
+		ldmfd	sp!, {r5 - r9}
+
+14:		ands	ip, r2, #28
+		beq	16f
+
+15:		mov     lr, r3, push #\push
+		ldr	r3, [r1, #-4]!
+		subs	ip, ip, #4
+		orr	lr, lr, r3, pull #\pull
+		str	lr, [r0, #-4]!
+		bgt	15b
+	CALGN(	cmp	r2, #0			)
+	CALGN(	bge	11b			)
+
+16:		add	r1, r1, #(\pull / 8)
+		b	8b
+
+		.endm
+
+
+		backward_copy_shift	push=8	pull=24
+
+17:		backward_copy_shift	push=16	pull=16
+
+18:		backward_copy_shift	push=24	pull=8
+
diff --git a/arch/arm/lib/uaccess.S b/arch/arm/lib/uaccess.S
index d3ed0636c00..c28449157be 100644
--- a/arch/arm/lib/uaccess.S
+++ b/arch/arm/lib/uaccess.S
@@ -657,41 +657,3 @@ USER(		ldrgtbt	r3, [r1], #1)			@ May fault
 		LOADREGS(fd,sp!, {r4 - r7, pc})
 		.previous
 
-/* Prototype: int __arch_clear_user(void *addr, size_t sz)
- * Purpose  : clear some user memory
- * Params   : addr - user memory address to clear
- *          : sz   - number of bytes to clear
- * Returns  : number of bytes NOT cleared
- */
-ENTRY(__arch_clear_user)
-		stmfd	sp!, {r1, lr}
-		mov	r2, #0
-		cmp	r1, #4
-		blt	2f
-		ands	ip, r0, #3
-		beq	1f
-		cmp	ip, #2
-USER(		strbt	r2, [r0], #1)
-USER(		strlebt	r2, [r0], #1)
-USER(		strltbt	r2, [r0], #1)
-		rsb	ip, ip, #4
-		sub	r1, r1, ip		@  7  6  5  4  3  2  1
-1:		subs	r1, r1, #8		@ -1 -2 -3 -4 -5 -6 -7
-USER(		strplt	r2, [r0], #4)
-USER(		strplt	r2, [r0], #4)
-		bpl	1b
-		adds	r1, r1, #4		@  3  2  1  0 -1 -2 -3
-USER(		strplt	r2, [r0], #4)
-2:		tst	r1, #2			@ 1x 1x 0x 0x 1x 1x 0x
-USER(		strnebt	r2, [r0], #1)
-USER(		strnebt	r2, [r0], #1)
-		tst	r1, #1			@ x1 x0 x1 x0 x1 x0 x1
-USER(		strnebt	r2, [r0], #1)
-		mov	r0, #0
-		LOADREGS(fd,sp!, {r1, pc})
-
-		.section .fixup,"ax"
-		.align	0
-9001:		LOADREGS(fd,sp!, {r0, pc})
-		.previous
-
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
index 15261646dcd..ed4614983ad 100644
--- a/arch/arm/mach-ebsa110/core.c
+++ b/arch/arm/mach-ebsa110/core.c
@@ -251,9 +251,33 @@ static struct platform_device serial_device = {
 	},
 };
 
+static struct resource am79c961_resources[] = {
+	{
+		.start		= 0x220,
+		.end		= 0x238,
+		.flags		= IORESOURCE_IO,
+	}, {
+		.start		= IRQ_EBSA110_ETHERNET,
+		.end		= IRQ_EBSA110_ETHERNET,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device am79c961_device = {
+	.name			= "am79c961",
+	.id			= -1,
+	.num_resources		= ARRAY_SIZE(am79c961_resources),
+	.resource		= am79c961_resources,
+};
+
+static struct platform_device *ebsa110_devices[] = {
+	&serial_device,
+	&am79c961_device,
+};
+
 static int __init ebsa110_init(void)
 {
-	return platform_device_register(&serial_device);
+	return platform_add_devices(ebsa110_devices, ARRAY_SIZE(ebsa110_devices));
 }
 
 arch_initcall(ebsa110_init);
diff --git a/arch/arm/mach-ixp2000/Makefile b/arch/arm/mach-ixp2000/Makefile
index 1e6139d42a9..9621aeb61f4 100644
--- a/arch/arm/mach-ixp2000/Makefile
+++ b/arch/arm/mach-ixp2000/Makefile
@@ -1,7 +1,7 @@
 #
 # Makefile for the linux kernel.
 #
-obj-y			:= core.o pci.o
+obj-y			:= core.o pci.o uengine.o
 obj-m			:=
 obj-n			:=
 obj-			:=
diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c
index 01c393c504d..c93a98b2a32 100644
--- a/arch/arm/mach-ixp2000/core.c
+++ b/arch/arm/mach-ixp2000/core.c
@@ -1,5 +1,5 @@
 /*
- * arch/arm/mach-ixp2000/common.c
+ * arch/arm/mach-ixp2000/core.c
  *
  * Common routines used by all IXP2400/2800 based platforms.
  *
@@ -49,7 +49,6 @@ static unsigned long ixp2000_slowport_irq_flags;
  *************************************************************************/
 void ixp2000_acquire_slowport(struct slowport_cfg *new_cfg, struct slowport_cfg *old_cfg)
 {
-
 	spin_lock_irqsave(&ixp2000_slowport_lock, ixp2000_slowport_irq_flags);
 
 	old_cfg->CCR = *IXP2000_SLOWPORT_CCR;
@@ -62,7 +61,7 @@ void ixp2000_acquire_slowport(struct slowport_cfg *new_cfg, struct slowport_cfg
 	ixp2000_reg_write(IXP2000_SLOWPORT_WTC2, new_cfg->WTC);
 	ixp2000_reg_write(IXP2000_SLOWPORT_RTC2, new_cfg->RTC);
 	ixp2000_reg_write(IXP2000_SLOWPORT_PCR, new_cfg->PCR);
-	ixp2000_reg_write(IXP2000_SLOWPORT_ADC, new_cfg->ADC);
+	ixp2000_reg_wrb(IXP2000_SLOWPORT_ADC, new_cfg->ADC);
 }
 
 void ixp2000_release_slowport(struct slowport_cfg *old_cfg)
@@ -71,7 +70,7 @@ void ixp2000_release_slowport(struct slowport_cfg *old_cfg)
 	ixp2000_reg_write(IXP2000_SLOWPORT_WTC2, old_cfg->WTC);
 	ixp2000_reg_write(IXP2000_SLOWPORT_RTC2, old_cfg->RTC);
 	ixp2000_reg_write(IXP2000_SLOWPORT_PCR, old_cfg->PCR);
-	ixp2000_reg_write(IXP2000_SLOWPORT_ADC, old_cfg->ADC);
+	ixp2000_reg_wrb(IXP2000_SLOWPORT_ADC, old_cfg->ADC);
 
 	spin_unlock_irqrestore(&ixp2000_slowport_lock, 
 					ixp2000_slowport_irq_flags);
@@ -145,7 +144,7 @@ void __init ixp2000_map_io(void)
 	iotable_init(ixp2000_io_desc, ARRAY_SIZE(ixp2000_io_desc));
 
 	/* Set slowport to 8-bit mode.  */
-	ixp2000_reg_write(IXP2000_SLOWPORT_FRM, 1);
+	ixp2000_reg_wrb(IXP2000_SLOWPORT_FRM, 1);
 }
 
 
@@ -209,7 +208,7 @@ static int ixp2000_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 	write_seqlock(&xtime_lock);
 
 	/* clear timer 1 */
-	ixp2000_reg_write(IXP2000_T1_CLR, 1);
+	ixp2000_reg_wrb(IXP2000_T1_CLR, 1);
 
 	while ((next_jiffy_time - *missing_jiffy_timer_csr) > ticks_per_jiffy) {
 		timer_tick(regs);
@@ -252,12 +251,12 @@ void __init ixp2000_init_time(unsigned long tick_rate)
 
 		ixp2000_reg_write(IXP2000_T4_CLR, 0);
 		ixp2000_reg_write(IXP2000_T4_CLD, -1);
-		ixp2000_reg_write(IXP2000_T4_CTL, (1 << 7));
+		ixp2000_reg_wrb(IXP2000_T4_CTL, (1 << 7));
 		missing_jiffy_timer_csr = IXP2000_T4_CSR;
 	} else {
 		ixp2000_reg_write(IXP2000_T2_CLR, 0);
 		ixp2000_reg_write(IXP2000_T2_CLD, -1);
-		ixp2000_reg_write(IXP2000_T2_CTL, (1 << 7));
+		ixp2000_reg_wrb(IXP2000_T2_CTL, (1 << 7));
 		missing_jiffy_timer_csr = IXP2000_T2_CSR;
 	}
  	next_jiffy_time = 0xffffffff;
@@ -279,7 +278,7 @@ static void update_gpio_int_csrs(void)
 	ixp2000_reg_write(IXP2000_GPIO_FEDR, GPIO_IRQ_falling_edge);
 	ixp2000_reg_write(IXP2000_GPIO_REDR, GPIO_IRQ_rising_edge);
 	ixp2000_reg_write(IXP2000_GPIO_LSLR, GPIO_IRQ_level_low);
-	ixp2000_reg_write(IXP2000_GPIO_LSHR, GPIO_IRQ_level_high);
+	ixp2000_reg_wrb(IXP2000_GPIO_LSHR, GPIO_IRQ_level_high);
 }
 
 void gpio_line_config(int line, int direction)
@@ -297,9 +296,9 @@ void gpio_line_config(int line, int direction)
 		GPIO_IRQ_level_high &= ~(1 << line);
 		update_gpio_int_csrs();
 
-		ixp2000_reg_write(IXP2000_GPIO_PDSR, 1 << line);
+		ixp2000_reg_wrb(IXP2000_GPIO_PDSR, 1 << line);
 	} else if (direction == GPIO_IN) {
-		ixp2000_reg_write(IXP2000_GPIO_PDCR, 1 << line);
+		ixp2000_reg_wrb(IXP2000_GPIO_PDCR, 1 << line);
 	}
 	local_irq_restore(flags);
 }
@@ -365,12 +364,12 @@ static void ixp2000_GPIO_irq_mask_ack(unsigned int irq)
 
 	ixp2000_reg_write(IXP2000_GPIO_EDSR, (1 << (irq - IRQ_IXP2000_GPIO0)));
 	ixp2000_reg_write(IXP2000_GPIO_LDSR, (1 << (irq - IRQ_IXP2000_GPIO0)));
-	ixp2000_reg_write(IXP2000_GPIO_INST, (1 << (irq - IRQ_IXP2000_GPIO0)));
+	ixp2000_reg_wrb(IXP2000_GPIO_INST, (1 << (irq - IRQ_IXP2000_GPIO0)));
 }
 
 static void ixp2000_GPIO_irq_mask(unsigned int irq)
 {
-	ixp2000_reg_write(IXP2000_GPIO_INCR, (1 << (irq - IRQ_IXP2000_GPIO0)));
+	ixp2000_reg_wrb(IXP2000_GPIO_INCR, (1 << (irq - IRQ_IXP2000_GPIO0)));
 }
 
 static void ixp2000_GPIO_irq_unmask(unsigned int irq)
@@ -389,9 +388,9 @@ static void ixp2000_pci_irq_mask(unsigned int irq)
 {
 	unsigned long temp = *IXP2000_PCI_XSCALE_INT_ENABLE;
 	if (irq == IRQ_IXP2000_PCIA)
-		ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 26)));
+		ixp2000_reg_wrb(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 26)));
 	else if (irq == IRQ_IXP2000_PCIB)
-		ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 27)));
+		ixp2000_reg_wrb(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 27)));
 }
 
 static void ixp2000_pci_irq_unmask(unsigned int irq)
@@ -411,7 +410,7 @@ static struct irqchip ixp2000_pci_irq_chip = {
 
 static void ixp2000_irq_mask(unsigned int irq)
 {
-	ixp2000_reg_write(IXP2000_IRQ_ENABLE_CLR, (1 << irq));
+	ixp2000_reg_wrb(IXP2000_IRQ_ENABLE_CLR, (1 << irq));
 }
 
 static void ixp2000_irq_unmask(unsigned int irq)
@@ -443,7 +442,7 @@ void __init ixp2000_init_irq(void)
 	ixp2000_reg_write(IXP2000_GPIO_INCR, -1);
 
 	/* clear PCI interrupt sources */
-	ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, 0);
+	ixp2000_reg_wrb(IXP2000_PCI_XSCALE_INT_ENABLE, 0);
 
 	/*
 	 * Certain bits in the IRQ status register of the 
diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c
index 643f5e1c3d9..7719c478aa8 100644
--- a/arch/arm/mach-ixp2000/enp2611.c
+++ b/arch/arm/mach-ixp2000/enp2611.c
@@ -64,6 +64,35 @@ static struct sys_timer enp2611_timer = {
 
 
 /*************************************************************************
+ * ENP-2611 I/O
+ *************************************************************************/
+static struct map_desc enp2611_io_desc[] __initdata = {
+	{
+		.virtual	= ENP2611_CALEB_VIRT_BASE,
+		.physical	= ENP2611_CALEB_PHYS_BASE,
+		.length		= ENP2611_CALEB_SIZE,
+		.type		= MT_IXP2000_DEVICE
+	}, {
+		.virtual	= ENP2611_PM3386_0_VIRT_BASE,
+		.physical	= ENP2611_PM3386_0_PHYS_BASE,
+		.length		= ENP2611_PM3386_0_SIZE,
+		.type		= MT_IXP2000_DEVICE
+	}, {
+		.virtual	= ENP2611_PM3386_1_VIRT_BASE,
+		.physical	= ENP2611_PM3386_1_PHYS_BASE,
+		.length		= ENP2611_PM3386_1_SIZE,
+		.type		= MT_IXP2000_DEVICE
+	}
+};
+
+void __init enp2611_map_io(void)
+{
+	ixp2000_map_io();
+	iotable_init(enp2611_io_desc, ARRAY_SIZE(enp2611_io_desc));
+}
+
+
+/*************************************************************************
  * ENP-2611 PCI
  *************************************************************************/
 static int enp2611_pci_setup(int nr, struct pci_sys_data *sys)
@@ -229,7 +258,7 @@ MACHINE_START(ENP2611, "Radisys ENP-2611 PCI network processor board")
 	.phys_io	= IXP2000_UART_PHYS_BASE,
 	.io_pg_offst	= ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
-	.map_io		= ixp2000_map_io,
+	.map_io		= enp2611_map_io,
 	.init_irq	= ixp2000_init_irq,
 	.timer		= &enp2611_timer,
 	.init_machine	= enp2611_init_machine,
diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c
index 05dfcb48c2b..d628da56b4b 100644
--- a/arch/arm/mach-ixp2000/ixdp2x00.c
+++ b/arch/arm/mach-ixp2000/ixdp2x00.c
@@ -81,7 +81,7 @@ static void ixdp2x00_irq_mask(unsigned int irq)
 
 	dummy = *board_irq_mask;
 	dummy |=  IXP2000_BOARD_IRQ_MASK(irq);
-	ixp2000_reg_write(board_irq_mask, dummy);
+	ixp2000_reg_wrb(board_irq_mask, dummy);
 
 #ifdef CONFIG_ARCH_IXDP2400
 	if (machine_is_ixdp2400())
@@ -101,7 +101,7 @@ static void ixdp2x00_irq_unmask(unsigned int irq)
 
 	dummy = *board_irq_mask;
 	dummy &=  ~IXP2000_BOARD_IRQ_MASK(irq);
-	ixp2000_reg_write(board_irq_mask, dummy);
+	ixp2000_reg_wrb(board_irq_mask, dummy);
 
 	if (machine_is_ixdp2400()) 
 		ixp2000_release_slowport(&old_cfg);
diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c
index b21249908ae..e6a882f35da 100644
--- a/arch/arm/mach-ixp2000/ixdp2x01.c
+++ b/arch/arm/mach-ixp2000/ixdp2x01.c
@@ -51,7 +51,7 @@
  *************************************************************************/
 static void ixdp2x01_irq_mask(unsigned int irq)
 {
-	ixp2000_reg_write(IXDP2X01_INT_MASK_SET_REG,
+	ixp2000_reg_wrb(IXDP2X01_INT_MASK_SET_REG,
 				IXP2000_BOARD_IRQ_MASK(irq));
 }
 
@@ -114,7 +114,7 @@ void __init ixdp2x01_init_irq(void)
 
 	/* Mask all interrupts from CPLD, disable simulation */
 	ixp2000_reg_write(IXDP2X01_INT_MASK_SET_REG, 0xffffffff);
-	ixp2000_reg_write(IXDP2X01_INT_SIM_REG, 0);
+	ixp2000_reg_wrb(IXDP2X01_INT_SIM_REG, 0);
 
 	for (irq = NR_IXP2000_IRQS; irq < NR_IXDP2X01_IRQS; irq++) {
 		if (irq & valid_irq_mask) {
@@ -299,7 +299,6 @@ struct hw_pci ixdp2x01_pci __initdata = {
 
 int __init ixdp2x01_pci_init(void)
 {
-
 	pci_common_init(&ixdp2x01_pci);
 	return 0;
 }
@@ -316,7 +315,7 @@ static struct flash_platform_data ixdp2x01_flash_platform_data = {
 
 static unsigned long ixdp2x01_flash_bank_setup(unsigned long ofs)
 {
-	ixp2000_reg_write(IXDP2X01_CPLD_FLASH_REG,
+	ixp2000_reg_wrb(IXDP2X01_CPLD_FLASH_REG,
 		((ofs >> IXDP2X01_FLASH_WINDOW_BITS) | IXDP2X01_CPLD_FLASH_INTERN));
 	return (ofs & IXDP2X01_FLASH_WINDOW_MASK);
 }
@@ -363,7 +362,7 @@ static struct platform_device *ixdp2x01_devices[] __initdata = {
 
 static void __init ixdp2x01_init_machine(void)
 {
-	ixp2000_reg_write(IXDP2X01_CPLD_FLASH_REG,
+	ixp2000_reg_wrb(IXDP2X01_CPLD_FLASH_REG,
 		(IXDP2X01_CPLD_FLASH_BANK_MASK | IXDP2X01_CPLD_FLASH_INTERN));
 	
 	ixdp2x01_flash_data.nr_banks =
diff --git a/arch/arm/mach-ixp2000/pci.c b/arch/arm/mach-ixp2000/pci.c
index 522205acb31..d4bf1e1c003 100644
--- a/arch/arm/mach-ixp2000/pci.c
+++ b/arch/arm/mach-ixp2000/pci.c
@@ -148,7 +148,7 @@ int ixp2000_pci_abort_handler(unsigned long addr, unsigned int fsr, struct pt_re
 	local_irq_save(flags);
 	temp = *(IXP2000_PCI_CONTROL);
 	if (temp & ((1 << 8) | (1 << 5))) {
-		ixp2000_reg_write(IXP2000_PCI_CONTROL, temp);
+		ixp2000_reg_wrb(IXP2000_PCI_CONTROL, temp);
 	}
 
 	temp = *(IXP2000_PCI_CMDSTAT);
@@ -178,8 +178,8 @@ clear_master_aborts(void)
 
 	local_irq_save(flags);
 	temp = *(IXP2000_PCI_CONTROL);
-	if (temp & ((1 << 8) | (1 << 5))) {	
-		ixp2000_reg_write(IXP2000_PCI_CONTROL, temp);
+	if (temp & ((1 << 8) | (1 << 5))) {
+		ixp2000_reg_wrb(IXP2000_PCI_CONTROL, temp);
 	}
 
 	temp = *(IXP2000_PCI_CMDSTAT);
diff --git a/arch/arm/mach-ixp2000/uengine.c b/arch/arm/mach-ixp2000/uengine.c
new file mode 100644
index 00000000000..43e234349d4
--- /dev/null
+++ b/arch/arm/mach-ixp2000/uengine.c
@@ -0,0 +1,474 @@
+/*
+ * Generic library functions for the microengines found on the Intel
+ * IXP2000 series of network processors.
+ *
+ * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
+ * Dedicated to Marija Kulikova.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as
+ * published by the Free Software Foundation; either version 2.1 of the
+ * License, or (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <asm/hardware.h>
+#include <asm/arch/ixp2000-regs.h>
+#include <asm/arch/uengine.h>
+#include <asm/io.h>
+
+#define USTORE_ADDRESS			0x000
+#define USTORE_DATA_LOWER		0x004
+#define USTORE_DATA_UPPER		0x008
+#define CTX_ENABLES			0x018
+#define CC_ENABLE			0x01c
+#define CSR_CTX_POINTER			0x020
+#define INDIRECT_CTX_STS		0x040
+#define ACTIVE_CTX_STS			0x044
+#define INDIRECT_CTX_SIG_EVENTS		0x048
+#define INDIRECT_CTX_WAKEUP_EVENTS	0x050
+#define NN_PUT				0x080
+#define NN_GET				0x084
+#define TIMESTAMP_LOW			0x0c0
+#define TIMESTAMP_HIGH			0x0c4
+#define T_INDEX_BYTE_INDEX		0x0f4
+#define LOCAL_CSR_STATUS		0x180
+
+u32 ixp2000_uengine_mask;
+
+static void *ixp2000_uengine_csr_area(int uengine)
+{
+	return ((void *)IXP2000_UENGINE_CSR_VIRT_BASE) + (uengine << 10);
+}
+
+/*
+ * LOCAL_CSR_STATUS=1 after a read or write to a microengine's CSR
+ * space means that the microengine we tried to access was also trying
+ * to access its own CSR space on the same clock cycle as we did.  When
+ * this happens, we lose the arbitration process by default, and the
+ * read or write we tried to do was not actually performed, so we try
+ * again until it succeeds.
+ */
+u32 ixp2000_uengine_csr_read(int uengine, int offset)
+{
+	void *uebase;
+	u32 *local_csr_status;
+	u32 *reg;
+	u32 value;
+
+	uebase = ixp2000_uengine_csr_area(uengine);
+
+	local_csr_status = (u32 *)(uebase + LOCAL_CSR_STATUS);
+	reg = (u32 *)(uebase + offset);
+	do {
+		value = ixp2000_reg_read(reg);
+	} while (ixp2000_reg_read(local_csr_status) & 1);
+
+	return value;
+}
+EXPORT_SYMBOL(ixp2000_uengine_csr_read);
+
+void ixp2000_uengine_csr_write(int uengine, int offset, u32 value)
+{
+	void *uebase;
+	u32 *local_csr_status;
+	u32 *reg;
+
+	uebase = ixp2000_uengine_csr_area(uengine);
+
+	local_csr_status = (u32 *)(uebase + LOCAL_CSR_STATUS);
+	reg = (u32 *)(uebase + offset);
+	do {
+		ixp2000_reg_write(reg, value);
+	} while (ixp2000_reg_read(local_csr_status) & 1);
+}
+EXPORT_SYMBOL(ixp2000_uengine_csr_write);
+
+void ixp2000_uengine_reset(u32 uengine_mask)
+{
+	ixp2000_reg_write(IXP2000_RESET1, uengine_mask & ixp2000_uengine_mask);
+	ixp2000_reg_write(IXP2000_RESET1, 0);
+}
+EXPORT_SYMBOL(ixp2000_uengine_reset);
+
+void ixp2000_uengine_set_mode(int uengine, u32 mode)
+{
+	/*
+	 * CTL_STR_PAR_EN: unconditionally enable parity checking on
+	 * control store.
+	 */
+	mode |= 0x10000000;
+	ixp2000_uengine_csr_write(uengine, CTX_ENABLES, mode);
+
+	/*
+	 * Enable updating of condition codes.
+	 */
+	ixp2000_uengine_csr_write(uengine, CC_ENABLE, 0x00002000);
+
+	/*
+	 * Initialise other per-microengine registers.
+	 */
+	ixp2000_uengine_csr_write(uengine, NN_PUT, 0x00);
+	ixp2000_uengine_csr_write(uengine, NN_GET, 0x00);
+	ixp2000_uengine_csr_write(uengine, T_INDEX_BYTE_INDEX, 0);
+}
+EXPORT_SYMBOL(ixp2000_uengine_set_mode);
+
+static int make_even_parity(u32 x)
+{
+	return hweight32(x) & 1;
+}
+
+static void ustore_write(int uengine, u64 insn)
+{
+	/*
+	 * Generate even parity for top and bottom 20 bits.
+	 */
+	insn |= (u64)make_even_parity((insn >> 20) & 0x000fffff) << 41;
+	insn |= (u64)make_even_parity(insn & 0x000fffff) << 40;
+
+	/*
+	 * Write to microstore.  The second write auto-increments
+	 * the USTORE_ADDRESS index register.
+	 */
+	ixp2000_uengine_csr_write(uengine, USTORE_DATA_LOWER, (u32)insn);
+	ixp2000_uengine_csr_write(uengine, USTORE_DATA_UPPER, (u32)(insn >> 32));
+}
+
+void ixp2000_uengine_load_microcode(int uengine, u8 *ucode, int insns)
+{
+	int i;
+
+	/*
+	 * Start writing to microstore at address 0.
+	 */
+	ixp2000_uengine_csr_write(uengine, USTORE_ADDRESS, 0x80000000);
+	for (i = 0; i < insns; i++) {
+		u64 insn;
+
+		insn = (((u64)ucode[0]) << 32) |
+			(((u64)ucode[1]) << 24) |
+			(((u64)ucode[2]) << 16) |
+			(((u64)ucode[3]) << 8) |
+			((u64)ucode[4]);
+		ucode += 5;
+
+		ustore_write(uengine, insn);
+	}
+
+	/*
+ 	 * Pad with a few NOPs at the end (to avoid the microengine
+	 * aborting as it prefetches beyond the last instruction), unless
+	 * we run off the end of the instruction store first, at which
+	 * point the address register will wrap back to zero.
+	 */
+	for (i = 0; i < 4; i++) {
+		u32 addr;
+
+		addr = ixp2000_uengine_csr_read(uengine, USTORE_ADDRESS);
+		if (addr == 0x80000000)
+			break;
+		ustore_write(uengine, 0xf0000c0300ULL);
+	}
+
+	/*
+	 * End programming.
+	 */
+	ixp2000_uengine_csr_write(uengine, USTORE_ADDRESS, 0x00000000);
+}
+EXPORT_SYMBOL(ixp2000_uengine_load_microcode);
+
+void ixp2000_uengine_init_context(int uengine, int context, int pc)
+{
+	/*
+	 * Select the right context for indirect access.
+	 */
+	ixp2000_uengine_csr_write(uengine, CSR_CTX_POINTER, context);
+
+	/*
+	 * Initialise signal masks to immediately go to Ready state.
+	 */
+	ixp2000_uengine_csr_write(uengine, INDIRECT_CTX_SIG_EVENTS, 1);
+	ixp2000_uengine_csr_write(uengine, INDIRECT_CTX_WAKEUP_EVENTS, 1);
+
+	/*
+	 * Set program counter.
+	 */
+	ixp2000_uengine_csr_write(uengine, INDIRECT_CTX_STS, pc);
+}
+EXPORT_SYMBOL(ixp2000_uengine_init_context);
+
+void ixp2000_uengine_start_contexts(int uengine, u8 ctx_mask)
+{
+	u32 mask;
+
+	/*
+	 * Enable the specified context to go to Executing state.
+	 */
+	mask = ixp2000_uengine_csr_read(uengine, CTX_ENABLES);
+	mask |= ctx_mask << 8;
+	ixp2000_uengine_csr_write(uengine, CTX_ENABLES, mask);
+}
+EXPORT_SYMBOL(ixp2000_uengine_start_contexts);
+
+void ixp2000_uengine_stop_contexts(int uengine, u8 ctx_mask)
+{
+	u32 mask;
+
+	/*
+	 * Disable the Ready->Executing transition.  Note that this
+	 * does not stop the context until it voluntarily yields.
+	 */
+	mask = ixp2000_uengine_csr_read(uengine, CTX_ENABLES);
+	mask &= ~(ctx_mask << 8);
+	ixp2000_uengine_csr_write(uengine, CTX_ENABLES, mask);
+}
+EXPORT_SYMBOL(ixp2000_uengine_stop_contexts);
+
+static int check_ixp_type(struct ixp2000_uengine_code *c)
+{
+	u32 product_id;
+	u32 rev;
+
+	product_id = ixp2000_reg_read(IXP2000_PRODUCT_ID);
+	if (((product_id >> 16) & 0x1f) != 0)
+		return 0;
+
+	switch ((product_id >> 8) & 0xff) {
+	case 0:		/* IXP2800 */
+		if (!(c->cpu_model_bitmask & 4))
+			return 0;
+		break;
+
+	case 1:		/* IXP2850 */
+		if (!(c->cpu_model_bitmask & 8))
+			return 0;
+		break;
+
+	case 2:		/* IXP2400 */
+		if (!(c->cpu_model_bitmask & 2))
+			return 0;
+		break;
+
+	default:
+		return 0;
+	}
+
+	rev = product_id & 0xff;
+	if (rev < c->cpu_min_revision || rev > c->cpu_max_revision)
+		return 0;
+
+	return 1;
+}
+
+static void generate_ucode(u8 *ucode, u32 *gpr_a, u32 *gpr_b)
+{
+	int offset;
+	int i;
+
+	offset = 0;
+
+	for (i = 0; i < 128; i++) {
+		u8 b3;
+		u8 b2;
+		u8 b1;
+		u8 b0;
+
+		b3 = (gpr_a[i] >> 24) & 0xff;
+		b2 = (gpr_a[i] >> 16) & 0xff;
+		b1 = (gpr_a[i] >> 8) & 0xff;
+		b0 = gpr_a[i] & 0xff;
+
+		// immed[@ai, (b1 << 8) | b0]
+		// 11110000 0000VVVV VVVV11VV VVVVVV00 1IIIIIII
+		ucode[offset++] = 0xf0;
+		ucode[offset++] = (b1 >> 4);
+		ucode[offset++] = (b1 << 4) | 0x0c | (b0 >> 6);
+		ucode[offset++] = (b0 << 2);
+		ucode[offset++] = 0x80 | i;
+
+		// immed_w1[@ai, (b3 << 8) | b2]
+		// 11110100 0100VVVV VVVV11VV VVVVVV00 1IIIIIII
+		ucode[offset++] = 0xf4;
+		ucode[offset++] = 0x40 | (b3 >> 4);
+		ucode[offset++] = (b3 << 4) | 0x0c | (b2 >> 6);
+		ucode[offset++] = (b2 << 2);
+		ucode[offset++] = 0x80 | i;
+	}
+
+	for (i = 0; i < 128; i++) {
+		u8 b3;
+		u8 b2;
+		u8 b1;
+		u8 b0;
+
+		b3 = (gpr_b[i] >> 24) & 0xff;
+		b2 = (gpr_b[i] >> 16) & 0xff;
+		b1 = (gpr_b[i] >> 8) & 0xff;
+		b0 = gpr_b[i] & 0xff;
+
+		// immed[@bi, (b1 << 8) | b0]
+		// 11110000 0000VVVV VVVV001I IIIIII11 VVVVVVVV
+		ucode[offset++] = 0xf0;
+		ucode[offset++] = (b1 >> 4);
+		ucode[offset++] = (b1 << 4) | 0x02 | (i >> 6);
+		ucode[offset++] = (i << 2) | 0x03;
+		ucode[offset++] = b0;
+
+		// immed_w1[@bi, (b3 << 8) | b2]
+		// 11110100 0100VVVV VVVV001I IIIIII11 VVVVVVVV
+		ucode[offset++] = 0xf4;
+		ucode[offset++] = 0x40 | (b3 >> 4);
+		ucode[offset++] = (b3 << 4) | 0x02 | (i >> 6);
+		ucode[offset++] = (i << 2) | 0x03;
+		ucode[offset++] = b2;
+	}
+
+	// ctx_arb[kill]
+	ucode[offset++] = 0xe0;
+	ucode[offset++] = 0x00;
+	ucode[offset++] = 0x01;
+	ucode[offset++] = 0x00;
+	ucode[offset++] = 0x00;
+}
+
+static int set_initial_registers(int uengine, struct ixp2000_uengine_code *c)
+{
+	int per_ctx_regs;
+	u32 *gpr_a;
+	u32 *gpr_b;
+	u8 *ucode;
+	int i;
+
+	gpr_a = kmalloc(128 * sizeof(u32), GFP_KERNEL);
+	gpr_b = kmalloc(128 * sizeof(u32), GFP_KERNEL);
+	ucode = kmalloc(513 * 5, GFP_KERNEL);
+	if (gpr_a == NULL || gpr_b == NULL || ucode == NULL) {
+		kfree(ucode);
+		kfree(gpr_b);
+		kfree(gpr_a);
+		return 1;
+	}
+
+	per_ctx_regs = 16;
+	if (c->uengine_parameters & IXP2000_UENGINE_4_CONTEXTS)
+		per_ctx_regs = 32;
+
+	memset(gpr_a, 0, sizeof(gpr_a));
+	memset(gpr_b, 0, sizeof(gpr_b));
+	for (i = 0; i < 256; i++) {
+		struct ixp2000_reg_value *r = c->initial_reg_values + i;
+		u32 *bank;
+		int inc;
+		int j;
+
+		if (r->reg == -1)
+			break;
+
+		bank = (r->reg & 0x400) ? gpr_b : gpr_a;
+		inc = (r->reg & 0x80) ? 128 : per_ctx_regs;
+
+		j = r->reg & 0x7f;
+		while (j < 128) {
+			bank[j] = r->value;
+			j += inc;
+		}
+	}
+
+	generate_ucode(ucode, gpr_a, gpr_b);
+	ixp2000_uengine_load_microcode(uengine, ucode, 513);
+	ixp2000_uengine_init_context(uengine, 0, 0);
+	ixp2000_uengine_start_contexts(uengine, 0x01);
+	for (i = 0; i < 100; i++) {
+		u32 status;
+
+		status = ixp2000_uengine_csr_read(uengine, ACTIVE_CTX_STS);
+		if (!(status & 0x80000000))
+			break;
+	}
+	ixp2000_uengine_stop_contexts(uengine, 0x01);
+
+	kfree(ucode);
+	kfree(gpr_b);
+	kfree(gpr_a);
+
+	return !!(i == 100);
+}
+
+int ixp2000_uengine_load(int uengine, struct ixp2000_uengine_code *c)
+{
+	int ctx;
+
+	if (!check_ixp_type(c))
+		return 1;
+
+	if (!(ixp2000_uengine_mask & (1 << uengine)))
+		return 1;
+
+	ixp2000_uengine_reset(1 << uengine);
+	ixp2000_uengine_set_mode(uengine, c->uengine_parameters);
+	if (set_initial_registers(uengine, c))
+		return 1;
+	ixp2000_uengine_load_microcode(uengine, c->insns, c->num_insns);
+
+	for (ctx = 0; ctx < 8; ctx++)
+		ixp2000_uengine_init_context(uengine, ctx, 0);
+
+	return 0;
+}
+EXPORT_SYMBOL(ixp2000_uengine_load);
+
+
+static int __init ixp2000_uengine_init(void)
+{
+	int uengine;
+	u32 value;
+
+	/*
+	 * Determine number of microengines present.
+	 */
+	switch ((ixp2000_reg_read(IXP2000_PRODUCT_ID) >> 8) & 0x1fff) {
+	case 0:		/* IXP2800 */
+	case 1:		/* IXP2850 */
+		ixp2000_uengine_mask = 0x00ff00ff;
+		break;
+
+	case 2:		/* IXP2400 */
+		ixp2000_uengine_mask = 0x000f000f;
+		break;
+
+	default:
+		printk(KERN_INFO "Detected unknown IXP2000 model (%.8x)\n",
+			(unsigned int)ixp2000_reg_read(IXP2000_PRODUCT_ID));
+		ixp2000_uengine_mask = 0x00000000;
+		break;
+	}
+
+	/*
+	 * Reset microengines.
+	 */
+	ixp2000_reg_write(IXP2000_RESET1, ixp2000_uengine_mask);
+	ixp2000_reg_write(IXP2000_RESET1, 0);
+
+	/*
+	 * Synchronise timestamp counters across all microengines.
+	 */
+	value = ixp2000_reg_read(IXP2000_MISC_CONTROL);
+	ixp2000_reg_write(IXP2000_MISC_CONTROL, value & ~0x80);
+	for (uengine = 0; uengine < 32; uengine++) {
+		if (ixp2000_uengine_mask & (1 << uengine)) {
+			ixp2000_uengine_csr_write(uengine, TIMESTAMP_LOW, 0);
+			ixp2000_uengine_csr_write(uengine, TIMESTAMP_HIGH, 0);
+		}
+	}
+	ixp2000_reg_write(IXP2000_MISC_CONTROL, value | 0x80);
+
+	return 0;
+}
+
+subsys_initcall(ixp2000_uengine_init);
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 1f6857d7747..9c6e77faec5 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -175,7 +175,7 @@ static struct platform_device sa1111_device = {
 static struct resource smc91x_resources[] = {
 	[0] = {
 		.name	= "smc91x-regs",
-		.start	= 0x0c000000,
+		.start	= 0x0c000c00,
 		.end	= 0x0c0fffff,
 		.flags	= IORESOURCE_MEM,
 	},
@@ -224,18 +224,75 @@ static struct pxafb_mach_info sharp_lm8v31 __initdata = {
 	.lccr3		= LCCR3_PCP | LCCR3_Acb(255),
 };
 
-static int lubbock_mci_init(struct device *dev, irqreturn_t (*lubbock_detect_int)(int, void *, struct pt_regs *), void *data)
+#define	MMC_POLL_RATE		msecs_to_jiffies(1000)
+
+static void lubbock_mmc_poll(unsigned long);
+static irqreturn_t (*mmc_detect_int)(int, void *, struct pt_regs *);
+
+static struct timer_list mmc_timer = {
+	.function	= lubbock_mmc_poll,
+};
+
+static void lubbock_mmc_poll(unsigned long data)
+{
+	unsigned long flags;
+
+	/* clear any previous irq state, then ... */
+	local_irq_save(flags);
+	LUB_IRQ_SET_CLR &= ~(1 << 0);
+	local_irq_restore(flags);
+
+	/* poll until mmc/sd card is removed */
+	if (LUB_IRQ_SET_CLR & (1 << 0))
+		mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE);
+	else {
+		(void) mmc_detect_int(LUBBOCK_SD_IRQ, (void *)data, NULL);
+		enable_irq(LUBBOCK_SD_IRQ);
+	}
+}
+
+static irqreturn_t lubbock_detect_int(int irq, void *data, struct pt_regs *regs)
+{
+	/* IRQ is level triggered; disable, and poll for removal */
+	disable_irq(irq);
+	mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE);
+
+	return mmc_detect_int(irq, data, regs);
+}
+
+static int lubbock_mci_init(struct device *dev,
+		irqreturn_t (*detect_int)(int, void *, struct pt_regs *),
+		void *data)
 {
 	/* setup GPIO for PXA25x MMC controller	*/
 	pxa_gpio_mode(GPIO6_MMCCLK_MD);
 	pxa_gpio_mode(GPIO8_MMCCS0_MD);
 
-	return 0;
+	/* detect card insert/eject */
+	mmc_detect_int = detect_int;
+	init_timer(&mmc_timer);
+	mmc_timer.data = (unsigned long) data;
+	return request_irq(LUBBOCK_SD_IRQ, lubbock_detect_int,
+			SA_SAMPLE_RANDOM, "lubbock-sd-detect", data);
+}
+
+static int lubbock_mci_get_ro(struct device *dev)
+{
+	return (LUB_MISC_RD & (1 << 2)) != 0;
+}
+
+static void lubbock_mci_exit(struct device *dev, void *data)
+{
+	free_irq(LUBBOCK_SD_IRQ, data);
+	del_timer_sync(&mmc_timer);
 }
 
 static struct pxamci_platform_data lubbock_mci_platform_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.detect_delay	= 1,
 	.init 		= lubbock_mci_init,
+	.get_ro		= lubbock_mci_get_ro,
+	.exit 		= lubbock_mci_exit,
 };
 
 static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
new file mode 100644
index 00000000000..4b63dc9eabf
--- /dev/null
+++ b/arch/arm/mach-realview/Kconfig
@@ -0,0 +1,11 @@
+menu "RealView platform type"
+	depends on ARCH_REALVIEW
+
+config MACH_REALVIEW_EB
+	bool "Support RealView/EB platform"
+	default n
+	select ARM_GIC
+	help
+	  Include support for the ARM(R) RealView Emulation Baseboard platform.
+
+endmenu
diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile
new file mode 100644
index 00000000000..8d37ea1605f
--- /dev/null
+++ b/arch/arm/mach-realview/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the linux kernel.
+#
+
+obj-y					:= core.o clock.o
+obj-$(CONFIG_MACH_REALVIEW_EB)		+= realview_eb.o
diff --git a/arch/arm/mach-realview/Makefile.boot b/arch/arm/mach-realview/Makefile.boot
new file mode 100644
index 00000000000..c7e75acfe6c
--- /dev/null
+++ b/arch/arm/mach-realview/Makefile.boot
@@ -0,0 +1,4 @@
+   zreladdr-y	:= 0x00008000
+params_phys-y	:= 0x00000100
+initrd_phys-y	:= 0x00800000
+
diff --git a/arch/arm/mach-realview/clock.c b/arch/arm/mach-realview/clock.c
new file mode 100644
index 00000000000..002635c97bb
--- /dev/null
+++ b/arch/arm/mach-realview/clock.c
@@ -0,0 +1,145 @@
+/*
+ *  linux/arch/arm/mach-realview/clock.c
+ *
+ *  Copyright (C) 2004 ARM Limited.
+ *  Written by Deep Blue Solutions Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+
+#include <asm/semaphore.h>
+#include <asm/hardware/clock.h>
+#include <asm/hardware/icst307.h>
+
+#include "clock.h"
+
+static LIST_HEAD(clocks);
+static DECLARE_MUTEX(clocks_sem);
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+	struct clk *p, *clk = ERR_PTR(-ENOENT);
+
+	down(&clocks_sem);
+	list_for_each_entry(p, &clocks, node) {
+		if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
+			clk = p;
+			break;
+		}
+	}
+	up(&clocks_sem);
+
+	return clk;
+}
+EXPORT_SYMBOL(clk_get);
+
+void clk_put(struct clk *clk)
+{
+	module_put(clk->owner);
+}
+EXPORT_SYMBOL(clk_put);
+
+int clk_enable(struct clk *clk)
+{
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+int clk_use(struct clk *clk)
+{
+	return 0;
+}
+EXPORT_SYMBOL(clk_use);
+
+void clk_unuse(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_unuse);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	return rate;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	int ret = -EIO;
+
+	if (clk->setvco) {
+		struct icst307_vco vco;
+
+		vco = icst307_khz_to_vco(clk->params, rate / 1000);
+		clk->rate = icst307_khz(clk->params, vco) * 1000;
+
+		printk("Clock %s: setting VCO reg params: S=%d R=%d V=%d\n",
+			clk->name, vco.s, vco.r, vco.v);
+
+		clk->setvco(clk, vco);
+		ret = 0;
+	}
+	return ret;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+/*
+ * These are fixed clocks.
+ */
+static struct clk kmi_clk = {
+	.name	= "KMIREFCLK",
+	.rate	= 24000000,
+};
+
+static struct clk uart_clk = {
+	.name	= "UARTCLK",
+	.rate	= 24000000,
+};
+
+static struct clk mmci_clk = {
+	.name	= "MCLK",
+	.rate	= 33000000,
+};
+
+int clk_register(struct clk *clk)
+{
+	down(&clocks_sem);
+	list_add(&clk->node, &clocks);
+	up(&clocks_sem);
+	return 0;
+}
+EXPORT_SYMBOL(clk_register);
+
+void clk_unregister(struct clk *clk)
+{
+	down(&clocks_sem);
+	list_del(&clk->node);
+	up(&clocks_sem);
+}
+EXPORT_SYMBOL(clk_unregister);
+
+static int __init clk_init(void)
+{
+	clk_register(&kmi_clk);
+	clk_register(&uart_clk);
+	clk_register(&mmci_clk);
+	return 0;
+}
+arch_initcall(clk_init);
diff --git a/arch/arm/mach-realview/clock.h b/arch/arm/mach-realview/clock.h
new file mode 100644
index 00000000000..dadba695e18
--- /dev/null
+++ b/arch/arm/mach-realview/clock.h
@@ -0,0 +1,25 @@
+/*
+ *  linux/arch/arm/mach-realview/clock.h
+ *
+ *  Copyright (C) 2004 ARM Limited.
+ *  Written by Deep Blue Solutions Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+struct module;
+struct icst307_params;
+
+struct clk {
+	struct list_head	node;
+	unsigned long		rate;
+	struct module		*owner;
+	const char		*name;
+	const struct icst307_params *params;
+	void			*data;
+	void			(*setvco)(struct clk *, struct icst307_vco vco);
+};
+
+int clk_register(struct clk *clk);
+void clk_unregister(struct clk *clk);
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
new file mode 100644
index 00000000000..482eb512ebe
--- /dev/null
+++ b/arch/arm/mach-realview/core.c
@@ -0,0 +1,605 @@
+/*
+ *  linux/arch/arm/mach-realview/core.c
+ *
+ *  Copyright (C) 1999 - 2003 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+
+#include <asm/system.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/leds.h>
+#include <asm/mach-types.h>
+#include <asm/hardware/amba.h>
+#include <asm/hardware/amba_clcd.h>
+#include <asm/hardware/arm_timer.h>
+#include <asm/hardware/icst307.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <asm/mach/mmc.h>
+
+#include <asm/hardware/gic.h>
+
+#include "core.h"
+#include "clock.h"
+
+#define REALVIEW_REFCOUNTER	(__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_24MHz_OFFSET)
+
+/*
+ * This is the RealView sched_clock implementation.  This has
+ * a resolution of 41.7ns, and a maximum value of about 179s.
+ */
+unsigned long long sched_clock(void)
+{
+	unsigned long long v;
+
+	v = (unsigned long long)readl(REALVIEW_REFCOUNTER) * 125;
+	do_div(v, 3);
+
+	return v;
+}
+
+
+#define REALVIEW_FLASHCTRL    (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_FLASH_OFFSET)
+
+static int realview_flash_init(void)
+{
+	u32 val;
+
+	val = __raw_readl(REALVIEW_FLASHCTRL);
+	val &= ~REALVIEW_FLASHPROG_FLVPPEN;
+	__raw_writel(val, REALVIEW_FLASHCTRL);
+
+	return 0;
+}
+
+static void realview_flash_exit(void)
+{
+	u32 val;
+
+	val = __raw_readl(REALVIEW_FLASHCTRL);
+	val &= ~REALVIEW_FLASHPROG_FLVPPEN;
+	__raw_writel(val, REALVIEW_FLASHCTRL);
+}
+
+static void realview_flash_set_vpp(int on)
+{
+	u32 val;
+
+	val = __raw_readl(REALVIEW_FLASHCTRL);
+	if (on)
+		val |= REALVIEW_FLASHPROG_FLVPPEN;
+	else
+		val &= ~REALVIEW_FLASHPROG_FLVPPEN;
+	__raw_writel(val, REALVIEW_FLASHCTRL);
+}
+
+static struct flash_platform_data realview_flash_data = {
+	.map_name		= "cfi_probe",
+	.width			= 4,
+	.init			= realview_flash_init,
+	.exit			= realview_flash_exit,
+	.set_vpp		= realview_flash_set_vpp,
+};
+
+static struct resource realview_flash_resource = {
+	.start			= REALVIEW_FLASH_BASE,
+	.end			= REALVIEW_FLASH_BASE + REALVIEW_FLASH_SIZE,
+	.flags			= IORESOURCE_MEM,
+};
+
+struct platform_device realview_flash_device = {
+	.name			= "armflash",
+	.id			= 0,
+	.dev			= {
+		.platform_data	= &realview_flash_data,
+	},
+	.num_resources		= 1,
+	.resource		= &realview_flash_resource,
+};
+
+static struct resource realview_smc91x_resources[] = {
+	[0] = {
+		.start		= REALVIEW_ETH_BASE,
+		.end		= REALVIEW_ETH_BASE + SZ_64K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= IRQ_ETH,
+		.end		= IRQ_ETH,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device realview_smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(realview_smc91x_resources),
+	.resource	= realview_smc91x_resources,
+};
+
+#define REALVIEW_SYSMCI	(__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_MCI_OFFSET)
+
+static unsigned int realview_mmc_status(struct device *dev)
+{
+	struct amba_device *adev = container_of(dev, struct amba_device, dev);
+	u32 mask;
+
+	if (adev->res.start == REALVIEW_MMCI0_BASE)
+		mask = 1;
+	else
+		mask = 2;
+
+	return readl(REALVIEW_SYSMCI) & mask;
+}
+
+struct mmc_platform_data realview_mmc0_plat_data = {
+	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.status		= realview_mmc_status,
+};
+
+struct mmc_platform_data realview_mmc1_plat_data = {
+	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.status		= realview_mmc_status,
+};
+
+/*
+ * Clock handling
+ */
+static const struct icst307_params realview_oscvco_params = {
+	.ref		= 24000,
+	.vco_max	= 200000,
+	.vd_min		= 4 + 8,
+	.vd_max		= 511 + 8,
+	.rd_min		= 1 + 2,
+	.rd_max		= 127 + 2,
+};
+
+static void realview_oscvco_set(struct clk *clk, struct icst307_vco vco)
+{
+	void __iomem *sys_lock = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LOCK_OFFSET;
+	void __iomem *sys_osc = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC1_OFFSET;
+	u32 val;
+
+	val = readl(sys_osc) & ~0x7ffff;
+	val |= vco.v | (vco.r << 9) | (vco.s << 16);
+
+	writel(0xa05f, sys_lock);
+	writel(val, sys_osc);
+	writel(0, sys_lock);
+}
+
+struct clk realview_clcd_clk = {
+	.name	= "CLCDCLK",
+	.params	= &realview_oscvco_params,
+	.setvco = realview_oscvco_set,
+};
+
+/*
+ * CLCD support.
+ */
+#define SYS_CLCD_MODE_MASK	(3 << 0)
+#define SYS_CLCD_MODE_888	(0 << 0)
+#define SYS_CLCD_MODE_5551	(1 << 0)
+#define SYS_CLCD_MODE_565_RLSB	(2 << 0)
+#define SYS_CLCD_MODE_565_BLSB	(3 << 0)
+#define SYS_CLCD_NLCDIOON	(1 << 2)
+#define SYS_CLCD_VDDPOSSWITCH	(1 << 3)
+#define SYS_CLCD_PWR3V5SWITCH	(1 << 4)
+#define SYS_CLCD_ID_MASK	(0x1f << 8)
+#define SYS_CLCD_ID_SANYO_3_8	(0x00 << 8)
+#define SYS_CLCD_ID_UNKNOWN_8_4	(0x01 << 8)
+#define SYS_CLCD_ID_EPSON_2_2	(0x02 << 8)
+#define SYS_CLCD_ID_SANYO_2_5	(0x07 << 8)
+#define SYS_CLCD_ID_VGA		(0x1f << 8)
+
+static struct clcd_panel vga = {
+	.mode		= {
+		.name		= "VGA",
+		.refresh	= 60,
+		.xres		= 640,
+		.yres		= 480,
+		.pixclock	= 39721,
+		.left_margin	= 40,
+		.right_margin	= 24,
+		.upper_margin	= 32,
+		.lower_margin	= 11,
+		.hsync_len	= 96,
+		.vsync_len	= 2,
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+	.width		= -1,
+	.height		= -1,
+	.tim2		= TIM2_BCD | TIM2_IPC,
+	.cntl		= CNTL_LCDTFT | CNTL_LCDVCOMP(1),
+	.bpp		= 16,
+};
+
+static struct clcd_panel sanyo_3_8_in = {
+	.mode		= {
+		.name		= "Sanyo QVGA",
+		.refresh	= 116,
+		.xres		= 320,
+		.yres		= 240,
+		.pixclock	= 100000,
+		.left_margin	= 6,
+		.right_margin	= 6,
+		.upper_margin	= 5,
+		.lower_margin	= 5,
+		.hsync_len	= 6,
+		.vsync_len	= 6,
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+	.width		= -1,
+	.height		= -1,
+	.tim2		= TIM2_BCD,
+	.cntl		= CNTL_LCDTFT | CNTL_LCDVCOMP(1),
+	.bpp		= 16,
+};
+
+static struct clcd_panel sanyo_2_5_in = {
+	.mode		= {
+		.name		= "Sanyo QVGA Portrait",
+		.refresh	= 116,
+		.xres		= 240,
+		.yres		= 320,
+		.pixclock	= 100000,
+		.left_margin	= 20,
+		.right_margin	= 10,
+		.upper_margin	= 2,
+		.lower_margin	= 2,
+		.hsync_len	= 10,
+		.vsync_len	= 2,
+		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+	.width		= -1,
+	.height		= -1,
+	.tim2		= TIM2_IVS | TIM2_IHS | TIM2_IPC,
+	.cntl		= CNTL_LCDTFT | CNTL_LCDVCOMP(1),
+	.bpp		= 16,
+};
+
+static struct clcd_panel epson_2_2_in = {
+	.mode		= {
+		.name		= "Epson QCIF",
+		.refresh	= 390,
+		.xres		= 176,
+		.yres		= 220,
+		.pixclock	= 62500,
+		.left_margin	= 3,
+		.right_margin	= 2,
+		.upper_margin	= 1,
+		.lower_margin	= 0,
+		.hsync_len	= 3,
+		.vsync_len	= 2,
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+	.width		= -1,
+	.height		= -1,
+	.tim2		= TIM2_BCD | TIM2_IPC,
+	.cntl		= CNTL_LCDTFT | CNTL_LCDVCOMP(1),
+	.bpp		= 16,
+};
+
+/*
+ * Detect which LCD panel is connected, and return the appropriate
+ * clcd_panel structure.  Note: we do not have any information on
+ * the required timings for the 8.4in panel, so we presently assume
+ * VGA timings.
+ */
+static struct clcd_panel *realview_clcd_panel(void)
+{
+	void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
+	struct clcd_panel *panel = &vga;
+	u32 val;
+
+	val = readl(sys_clcd) & SYS_CLCD_ID_MASK;
+	if (val == SYS_CLCD_ID_SANYO_3_8)
+		panel = &sanyo_3_8_in;
+	else if (val == SYS_CLCD_ID_SANYO_2_5)
+		panel = &sanyo_2_5_in;
+	else if (val == SYS_CLCD_ID_EPSON_2_2)
+		panel = &epson_2_2_in;
+	else if (val == SYS_CLCD_ID_VGA)
+		panel = &vga;
+	else {
+		printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n",
+			val);
+		panel = &vga;
+	}
+
+	return panel;
+}
+
+/*
+ * Disable all display connectors on the interface module.
+ */
+static void realview_clcd_disable(struct clcd_fb *fb)
+{
+	void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
+	u32 val;
+
+	val = readl(sys_clcd);
+	val &= ~SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
+	writel(val, sys_clcd);
+}
+
+/*
+ * Enable the relevant connector on the interface module.
+ */
+static void realview_clcd_enable(struct clcd_fb *fb)
+{
+	void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
+	u32 val;
+
+	val = readl(sys_clcd);
+	val &= ~SYS_CLCD_MODE_MASK;
+
+	switch (fb->fb.var.green.length) {
+	case 5:
+		val |= SYS_CLCD_MODE_5551;
+		break;
+	case 6:
+		val |= SYS_CLCD_MODE_565_RLSB;
+		break;
+	case 8:
+		val |= SYS_CLCD_MODE_888;
+		break;
+	}
+
+	/*
+	 * Set the MUX
+	 */
+	writel(val, sys_clcd);
+
+	/*
+	 * And now enable the PSUs
+	 */
+	val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
+	writel(val, sys_clcd);
+}
+
+static unsigned long framesize = SZ_1M;
+
+static int realview_clcd_setup(struct clcd_fb *fb)
+{
+	dma_addr_t dma;
+
+	fb->panel		= realview_clcd_panel();
+
+	fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize,
+						    &dma, GFP_KERNEL);
+	if (!fb->fb.screen_base) {
+		printk(KERN_ERR "CLCD: unable to map framebuffer\n");
+		return -ENOMEM;
+	}
+
+	fb->fb.fix.smem_start	= dma;
+	fb->fb.fix.smem_len	= framesize;
+
+	return 0;
+}
+
+static int realview_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
+{
+	return dma_mmap_writecombine(&fb->dev->dev, vma,
+				     fb->fb.screen_base,
+				     fb->fb.fix.smem_start,
+				     fb->fb.fix.smem_len);
+}
+
+static void realview_clcd_remove(struct clcd_fb *fb)
+{
+	dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
+			      fb->fb.screen_base, fb->fb.fix.smem_start);
+}
+
+struct clcd_board clcd_plat_data = {
+	.name		= "RealView",
+	.check		= clcdfb_check,
+	.decode		= clcdfb_decode,
+	.disable	= realview_clcd_disable,
+	.enable		= realview_clcd_enable,
+	.setup		= realview_clcd_setup,
+	.mmap		= realview_clcd_mmap,
+	.remove		= realview_clcd_remove,
+};
+
+#ifdef CONFIG_LEDS
+#define VA_LEDS_BASE (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LED_OFFSET)
+
+void realview_leds_event(led_event_t ledevt)
+{
+	unsigned long flags;
+	u32 val;
+
+	local_irq_save(flags);
+	val = readl(VA_LEDS_BASE);
+
+	switch (ledevt) {
+	case led_idle_start:
+		val = val & ~REALVIEW_SYS_LED0;
+		break;
+
+	case led_idle_end:
+		val = val | REALVIEW_SYS_LED0;
+		break;
+
+	case led_timer:
+		val = val ^ REALVIEW_SYS_LED1;
+		break;
+
+	case led_halted:
+		val = 0;
+		break;
+
+	default:
+		break;
+	}
+
+	writel(val, VA_LEDS_BASE);
+	local_irq_restore(flags);
+}
+#endif	/* CONFIG_LEDS */
+
+/*
+ * Where is the timer (VA)?
+ */
+#define TIMER0_VA_BASE		 __io_address(REALVIEW_TIMER0_1_BASE)
+#define TIMER1_VA_BASE		(__io_address(REALVIEW_TIMER0_1_BASE) + 0x20)
+#define TIMER2_VA_BASE		 __io_address(REALVIEW_TIMER2_3_BASE)
+#define TIMER3_VA_BASE		(__io_address(REALVIEW_TIMER2_3_BASE) + 0x20)
+
+/*
+ * How long is the timer interval?
+ */
+#define TIMER_INTERVAL	(TICKS_PER_uSEC * mSEC_10)
+#if TIMER_INTERVAL >= 0x100000
+#define TIMER_RELOAD	(TIMER_INTERVAL >> 8)
+#define TIMER_DIVISOR	(TIMER_CTRL_DIV256)
+#define TICKS2USECS(x)	(256 * (x) / TICKS_PER_uSEC)
+#elif TIMER_INTERVAL >= 0x10000
+#define TIMER_RELOAD	(TIMER_INTERVAL >> 4)		/* Divide by 16 */
+#define TIMER_DIVISOR	(TIMER_CTRL_DIV16)
+#define TICKS2USECS(x)	(16 * (x) / TICKS_PER_uSEC)
+#else
+#define TIMER_RELOAD	(TIMER_INTERVAL)
+#define TIMER_DIVISOR	(TIMER_CTRL_DIV1)
+#define TICKS2USECS(x)	((x) / TICKS_PER_uSEC)
+#endif
+
+/*
+ * Returns number of ms since last clock interrupt.  Note that interrupts
+ * will have been disabled by do_gettimeoffset()
+ */
+static unsigned long realview_gettimeoffset(void)
+{
+	unsigned long ticks1, ticks2, status;
+
+	/*
+	 * Get the current number of ticks.  Note that there is a race
+	 * condition between us reading the timer and checking for
+	 * an interrupt.  We get around this by ensuring that the
+	 * counter has not reloaded between our two reads.
+	 */
+	ticks2 = readl(TIMER0_VA_BASE + TIMER_VALUE) & 0xffff;
+	do {
+		ticks1 = ticks2;
+		status = __raw_readl(__io_address(REALVIEW_GIC_DIST_BASE + GIC_DIST_PENDING_SET)
+				     + ((IRQ_TIMERINT0_1 >> 5) << 2));
+		ticks2 = readl(TIMER0_VA_BASE + TIMER_VALUE) & 0xffff;
+	} while (ticks2 > ticks1);
+
+	/*
+	 * Number of ticks since last interrupt.
+	 */
+	ticks1 = TIMER_RELOAD - ticks2;
+
+	/*
+	 * Interrupt pending?  If so, we've reloaded once already.
+	 *
+	 * FIXME: Need to check this is effectively timer 0 that expires
+	 */
+	if (status & IRQMASK_TIMERINT0_1)
+		ticks1 += TIMER_RELOAD;
+
+	/*
+	 * Convert the ticks to usecs
+	 */
+	return TICKS2USECS(ticks1);
+}
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t realview_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	write_seqlock(&xtime_lock);
+
+	// ...clear the interrupt
+	writel(1, TIMER0_VA_BASE + TIMER_INTCLR);
+
+	timer_tick(regs);
+
+	write_sequnlock(&xtime_lock);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction realview_timer_irq = {
+	.name		= "RealView Timer Tick",
+	.flags		= SA_INTERRUPT | SA_TIMER,
+	.handler	= realview_timer_interrupt,
+};
+
+/*
+ * Set up timer interrupt, and return the current time in seconds.
+ */
+static void __init realview_timer_init(void)
+{
+	u32 val;
+
+	/* 
+	 * set clock frequency: 
+	 *	REALVIEW_REFCLK is 32KHz
+	 *	REALVIEW_TIMCLK is 1MHz
+	 */
+	val = readl(__io_address(REALVIEW_SCTL_BASE));
+	writel((REALVIEW_TIMCLK << REALVIEW_TIMER1_EnSel) |
+	       (REALVIEW_TIMCLK << REALVIEW_TIMER2_EnSel) | 
+	       (REALVIEW_TIMCLK << REALVIEW_TIMER3_EnSel) |
+	       (REALVIEW_TIMCLK << REALVIEW_TIMER4_EnSel) | val,
+	       __io_address(REALVIEW_SCTL_BASE));
+
+	/*
+	 * Initialise to a known state (all timers off)
+	 */
+	writel(0, TIMER0_VA_BASE + TIMER_CTRL);
+	writel(0, TIMER1_VA_BASE + TIMER_CTRL);
+	writel(0, TIMER2_VA_BASE + TIMER_CTRL);
+	writel(0, TIMER3_VA_BASE + TIMER_CTRL);
+
+	writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_LOAD);
+	writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_VALUE);
+	writel(TIMER_DIVISOR | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC |
+	       TIMER_CTRL_IE, TIMER0_VA_BASE + TIMER_CTRL);
+
+	/* 
+	 * Make irqs happen for the system timer
+	 */
+	setup_irq(IRQ_TIMERINT0_1, &realview_timer_irq);
+}
+
+struct sys_timer realview_timer = {
+	.init		= realview_timer_init,
+	.offset		= realview_gettimeoffset,
+};
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
new file mode 100644
index 00000000000..575599db74d
--- /dev/null
+++ b/arch/arm/mach-realview/core.h
@@ -0,0 +1,118 @@
+/*
+ *  linux/arch/arm/mach-realview/core.h
+ *
+ *  Copyright (C) 2004 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_REALVIEW_H
+#define __ASM_ARCH_REALVIEW_H
+
+#include <asm/hardware/amba.h>
+#include <asm/io.h>
+
+#define __io_address(n)		__io(IO_ADDRESS(n))
+
+extern struct sys_timer realview_timer;
+
+#define AMBA_DEVICE(name,busid,base,plat)			\
+static struct amba_device name##_device = {			\
+	.dev		= {					\
+		.coherent_dma_mask = ~0,			\
+		.bus_id	= busid,				\
+		.platform_data = plat,				\
+	},							\
+	.res		= {					\
+		.start	= REALVIEW_##base##_BASE,		\
+		.end	= (REALVIEW_##base##_BASE) + SZ_4K - 1,\
+		.flags	= IORESOURCE_MEM,			\
+	},							\
+	.dma_mask	= ~0,					\
+	.irq		= base##_IRQ,				\
+	/* .dma		= base##_DMA,*/				\
+}
+
+/*
+ * These devices are connected via the core APB bridge
+ */
+#define GPIO2_IRQ	{ IRQ_GPIOINT2, NO_IRQ }
+#define GPIO2_DMA	{ 0, 0 }
+#define GPIO3_IRQ	{ IRQ_GPIOINT3, NO_IRQ }
+#define GPIO3_DMA	{ 0, 0 }
+
+#define AACI_IRQ	{ IRQ_AACI, NO_IRQ }
+#define AACI_DMA	{ 0x80, 0x81 }
+#define MMCI0_IRQ	{ IRQ_MMCI0A,IRQ_MMCI0B }
+#define MMCI0_DMA	{ 0x84, 0 }
+#define KMI0_IRQ	{ IRQ_KMI0, NO_IRQ }
+#define KMI0_DMA	{ 0, 0 }
+#define KMI1_IRQ	{ IRQ_KMI1, NO_IRQ }
+#define KMI1_DMA	{ 0, 0 }
+
+/*
+ * These devices are connected directly to the multi-layer AHB switch
+ */
+#define SMC_IRQ		{ NO_IRQ, NO_IRQ }
+#define SMC_DMA		{ 0, 0 }
+#define MPMC_IRQ	{ NO_IRQ, NO_IRQ }
+#define MPMC_DMA	{ 0, 0 }
+#define CLCD_IRQ	{ IRQ_CLCDINT, NO_IRQ }
+#define CLCD_DMA	{ 0, 0 }
+#define DMAC_IRQ	{ IRQ_DMAINT, NO_IRQ }
+#define DMAC_DMA	{ 0, 0 }
+
+/*
+ * These devices are connected via the core APB bridge
+ */
+#define SCTL_IRQ	{ NO_IRQ, NO_IRQ }
+#define SCTL_DMA	{ 0, 0 }
+#define WATCHDOG_IRQ	{ IRQ_WDOGINT, NO_IRQ }
+#define WATCHDOG_DMA	{ 0, 0 }
+#define GPIO0_IRQ	{ IRQ_GPIOINT0, NO_IRQ }
+#define GPIO0_DMA	{ 0, 0 }
+#define GPIO1_IRQ	{ IRQ_GPIOINT1, NO_IRQ }
+#define GPIO1_DMA	{ 0, 0 }
+#define RTC_IRQ		{ IRQ_RTCINT, NO_IRQ }
+#define RTC_DMA		{ 0, 0 }
+
+/*
+ * These devices are connected via the DMA APB bridge
+ */
+#define SCI_IRQ		{ IRQ_SCIINT, NO_IRQ }
+#define SCI_DMA		{ 7, 6 }
+#define UART0_IRQ	{ IRQ_UARTINT0, NO_IRQ }
+#define UART0_DMA	{ 15, 14 }
+#define UART1_IRQ	{ IRQ_UARTINT1, NO_IRQ }
+#define UART1_DMA	{ 13, 12 }
+#define UART2_IRQ	{ IRQ_UARTINT2, NO_IRQ }
+#define UART2_DMA	{ 11, 10 }
+#define UART3_IRQ	{ IRQ_UART3, NO_IRQ }
+#define UART3_DMA	{ 0x86, 0x87 }
+#define SSP_IRQ		{ IRQ_SSPINT, NO_IRQ }
+#define SSP_DMA		{ 9, 8 }
+
+
+extern struct platform_device realview_flash_device;
+extern struct platform_device realview_smc91x_device;
+extern struct mmc_platform_data realview_mmc0_plat_data;
+extern struct mmc_platform_data realview_mmc1_plat_data;
+extern struct clk realview_clcd_clk;
+extern struct clcd_board clcd_plat_data;
+
+extern void realview_leds_event(led_event_t ledevt);
+
+#endif
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
new file mode 100644
index 00000000000..01b264be502
--- /dev/null
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -0,0 +1,142 @@
+/*
+ *  linux/arch/arm/mach-realview/realview_eb.c
+ *
+ *  Copyright (C) 2004 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/leds.h>
+#include <asm/mach-types.h>
+#include <asm/hardware/gic.h>
+#include <asm/hardware/amba.h>
+#include <asm/hardware/icst307.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/mmc.h>
+
+#include <asm/arch/irqs.h>
+
+#include "core.h"
+#include "clock.h"
+
+static struct map_desc realview_eb_io_desc[] __initdata = {
+ { IO_ADDRESS(REALVIEW_SYS_BASE),	REALVIEW_SYS_BASE,	SZ_4K,	MT_DEVICE },
+ { IO_ADDRESS(REALVIEW_GIC_CPU_BASE),	REALVIEW_GIC_CPU_BASE,	SZ_4K,	MT_DEVICE },
+ { IO_ADDRESS(REALVIEW_GIC_DIST_BASE),	REALVIEW_GIC_DIST_BASE,	SZ_4K,	MT_DEVICE },
+ { IO_ADDRESS(REALVIEW_SCTL_BASE),	REALVIEW_SCTL_BASE,	SZ_4K,	MT_DEVICE },
+ { IO_ADDRESS(REALVIEW_TIMER0_1_BASE),	REALVIEW_TIMER0_1_BASE,	SZ_4K,	MT_DEVICE },
+ { IO_ADDRESS(REALVIEW_TIMER2_3_BASE),	REALVIEW_TIMER2_3_BASE,	SZ_4K,	MT_DEVICE },
+#ifdef CONFIG_DEBUG_LL
+ { IO_ADDRESS(REALVIEW_UART0_BASE),	REALVIEW_UART0_BASE,	SZ_4K,	MT_DEVICE },
+#endif
+};
+
+static void __init realview_eb_map_io(void)
+{
+	iotable_init(realview_eb_io_desc, ARRAY_SIZE(realview_eb_io_desc));
+}
+
+/* FPGA Primecells */
+AMBA_DEVICE(aaci,  "fpga:04", AACI,     NULL);
+AMBA_DEVICE(mmc0,  "fpga:05", MMCI0,    &realview_mmc0_plat_data);
+AMBA_DEVICE(kmi0,  "fpga:06", KMI0,     NULL);
+AMBA_DEVICE(kmi1,  "fpga:07", KMI1,     NULL);
+AMBA_DEVICE(uart3, "fpga:09", UART3,    NULL);
+
+/* DevChip Primecells */
+AMBA_DEVICE(smc,   "dev:00",  SMC,      NULL);
+AMBA_DEVICE(clcd,  "dev:20",  CLCD,     &clcd_plat_data);
+AMBA_DEVICE(dmac,  "dev:30",  DMAC,     NULL);
+AMBA_DEVICE(sctl,  "dev:e0",  SCTL,     NULL);
+AMBA_DEVICE(wdog,  "dev:e1",  WATCHDOG, NULL);
+AMBA_DEVICE(gpio0, "dev:e4",  GPIO0,    NULL);
+AMBA_DEVICE(gpio1, "dev:e5",  GPIO1,    NULL);
+AMBA_DEVICE(gpio2, "dev:e6",  GPIO2,    NULL);
+AMBA_DEVICE(rtc,   "dev:e8",  RTC,      NULL);
+AMBA_DEVICE(sci0,  "dev:f0",  SCI,      NULL);
+AMBA_DEVICE(uart0, "dev:f1",  UART0,    NULL);
+AMBA_DEVICE(uart1, "dev:f2",  UART1,    NULL);
+AMBA_DEVICE(uart2, "dev:f3",  UART2,    NULL);
+AMBA_DEVICE(ssp0,  "dev:f4",  SSP,      NULL);
+
+static struct amba_device *amba_devs[] __initdata = {
+	&dmac_device,
+	&uart0_device,
+	&uart1_device,
+	&uart2_device,
+	&uart3_device,
+	&smc_device,
+	&clcd_device,
+	&sctl_device,
+	&wdog_device,
+	&gpio0_device,
+	&gpio1_device,
+	&gpio2_device,
+	&rtc_device,
+	&sci0_device,
+	&ssp0_device,
+	&aaci_device,
+	&mmc0_device,
+	&kmi0_device,
+	&kmi1_device,
+};
+
+static void __init gic_init_irq(void)
+{
+	gic_dist_init(__io_address(REALVIEW_GIC_DIST_BASE));
+	gic_cpu_init(__io_address(REALVIEW_GIC_CPU_BASE));
+}
+
+static void __init realview_eb_init(void)
+{
+	int i;
+
+	clk_register(&realview_clcd_clk);
+
+	platform_device_register(&realview_flash_device);
+	platform_device_register(&realview_smc91x_device);
+
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+		struct amba_device *d = amba_devs[i];
+		amba_device_register(d, &iomem_resource);
+	}
+
+#ifdef CONFIG_LEDS
+	leds_event = realview_leds_event;
+#endif
+}
+
+MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
+	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
+	.phys_ram	= 0x00000000,
+	.phys_io	= REALVIEW_UART0_BASE,
+	.io_pg_offst	= (IO_ADDRESS(REALVIEW_UART0_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.map_io		= realview_eb_map_io,
+	.init_irq	= gic_init_irq,
+	.timer		= &realview_timer,
+	.init_machine	= realview_eb_init,
+MACHINE_END
diff --git a/arch/arm/mach-s3c2410/mach-rx3715.c b/arch/arm/mach-s3c2410/mach-rx3715.c
index 8f2a90bf940..24d69019a84 100644
--- a/arch/arm/mach-s3c2410/mach-rx3715.c
+++ b/arch/arm/mach-s3c2410/mach-rx3715.c
@@ -17,6 +17,7 @@
  *	10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
  *	14-Mar-2005 BJD  Fixed __iomem warnings
  *	20-Sep-2005 BJD  Added static to non-exported items
+ *	31-Oct-2005 BJD  Added LCD setup for framebuffer
 */
 
 #include <linux/kernel.h>
@@ -43,6 +44,9 @@
 
 #include <asm/arch/regs-serial.h>
 #include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-lcd.h>
+
+#include <asm/arch/fb.h>
 
 #include "clock.h"
 #include "devs.h"
@@ -97,6 +101,66 @@ static struct s3c2410_uartcfg rx3715_uartcfgs[] = {
 	}
 };
 
+/* framebuffer lcd controller information */
+
+static struct s3c2410fb_mach_info rx3715_lcdcfg __initdata = {
+	.regs	= {
+		.lcdcon1 =	S3C2410_LCDCON1_TFT16BPP | \
+				S3C2410_LCDCON1_TFT | \
+				S3C2410_LCDCON1_CLKVAL(0x0C),
+
+		.lcdcon2 =	S3C2410_LCDCON2_VBPD(5) | \
+				S3C2410_LCDCON2_LINEVAL(319) | \
+				S3C2410_LCDCON2_VFPD(6) | \
+				S3C2410_LCDCON2_VSPW(2),
+
+		.lcdcon3 =	S3C2410_LCDCON3_HBPD(35) | \
+				S3C2410_LCDCON3_HOZVAL(239) | \
+				S3C2410_LCDCON3_HFPD(35),
+
+		.lcdcon4 =	S3C2410_LCDCON4_MVAL(0) | \
+				S3C2410_LCDCON4_HSPW(7),
+
+		.lcdcon5 =	S3C2410_LCDCON5_INVVLINE |
+				S3C2410_LCDCON5_FRM565 |
+				S3C2410_LCDCON5_HWSWP,
+	},
+
+	.lpcsel =	0xf82,
+
+	.gpccon =	0xaa955699,
+	.gpccon_mask =	0xffc003cc,
+	.gpcup =	0x0000ffff,
+	.gpcup_mask =	0xffffffff,
+
+	.gpdcon =	0xaa95aaa1,
+	.gpdcon_mask =	0xffc0fff0,
+	.gpdup =	0x0000faff,
+	.gpdup_mask =	0xffffffff,
+
+	.fixed_syncs =	1,
+	.width  =	240,
+	.height =	320,
+
+	.xres	= {
+		.min =		240,
+		.max =		240,
+		.defval =	240,
+	},
+
+	.yres	= {
+		.max =		320,
+		.min =		320,
+		.defval	=	320,
+	},
+
+	.bpp	= {
+		.min =		16,
+		.max =		16,
+		.defval =	16,
+	},
+};
+
 static struct platform_device *rx3715_devices[] __initdata = {
 	&s3c_device_usb,
 	&s3c_device_lcd,
@@ -123,14 +187,12 @@ static void __init rx3715_init_irq(void)
 	s3c24xx_init_irq();
 }
 
-#ifdef CONFIG_PM
 static void __init rx3715_init_machine(void)
 {
 	s3c2410_pm_init();
+	s3c24xx_fb_set_platdata(&rx3715_lcdcfg);
 }
-#else
-#define rx3715_init_machine NULL
-#endif
+
 
 MACHINE_START(RX3715, "IPAQ-RX3715")
 	/* Maintainer: Ben Dooks <ben@fluff.org> */
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index c54e04c995e..5568403e984 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -120,8 +120,8 @@ config CPU_ARM925T
 
 # ARM926T
 config CPU_ARM926T
-	bool "Support ARM926T processor" if ARCH_INTEGRATOR
-	depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX
+	bool "Support ARM926T processor"
+	depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB
 	default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX
 	select CPU_32v5
 	select CPU_ABRT_EV5TJ
@@ -242,7 +242,7 @@ config CPU_XSCALE
 # ARMv6
 config CPU_V6
 	bool "Support ARM V6 processor"
-	depends on ARCH_INTEGRATOR
+	depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB
 	select CPU_32v6
 	select CPU_ABRT_EV6
 	select CPU_CACHE_V6
diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c
index 13752bcb2af..cfae4ad00fa 100644
--- a/drivers/i2c/busses/i2c-iop3xx.c
+++ b/drivers/i2c/busses/i2c-iop3xx.c
@@ -11,7 +11,7 @@
  *
  * Copyright (C) 1995-1997 Simon G. Vogl, 1998-2000 Hans Berglund
  *  
- * And which acknowledged Kyösti Mälkki <kmalkki@cc.hut.fi>,
+ * And which acknowledged Kyösti Mälkki <kmalkki@cc.hut.fi>,
  * Frodo Looijaard <frodol@dds.nl>, Martin Bailey<mbailey@littlefeet-inc.com>
  *
  * Major cleanup by Deepak Saxena <dsaxena@plexity.net>, 01/2005:
@@ -184,7 +184,7 @@ iop3xx_i2c_wait_event(struct i2c_algo_iop3xx_data *iop3xx_adap,
 	do {
 		interrupted = wait_event_interruptible_timeout (
 			iop3xx_adap->waitq,
-			(done = compare( sr = iop3xx_i2c_get_srstat(iop3xx_adap)					,flags )),
+			(done = compare( sr = iop3xx_i2c_get_srstat(iop3xx_adap) ,flags )),
 			1 * HZ;
 			);
 		if ((rc = iop3xx_i2c_error(sr)) < 0) {
@@ -472,9 +472,10 @@ iop3xx_i2c_probe(struct device *dev)
 		goto release_region;
 	}
 
-	res = request_irq(platform_get_irq(pdev, 0), iop3xx_i2c_irq_handler, 0, 
+	ret = request_irq(platform_get_irq(pdev, 0), iop3xx_i2c_irq_handler, 0,
 				pdev->name, adapter_data);
-	if (res) {
+
+	if (ret) {
 		ret = -EIO;
 		goto unmap;
 	}
diff --git a/drivers/net/arm/am79c961a.c b/drivers/net/arm/am79c961a.c
index 3d50e953faa..877891a29aa 100644
--- a/drivers/net/arm/am79c961a.c
+++ b/drivers/net/arm/am79c961a.c
@@ -26,11 +26,11 @@
 #include <linux/init.h>
 #include <linux/crc32.h>
 #include <linux/bitops.h>
+#include <linux/platform_device.h>
 
-#include <asm/system.h>
-#include <asm/irq.h>
 #include <asm/hardware.h>
 #include <asm/io.h>
+#include <asm/system.h>
 
 #define TX_BUFFERS 15
 #define RX_BUFFERS 25
@@ -280,10 +280,13 @@ static void am79c961_timer(unsigned long data)
 	lnkstat = read_ireg(dev->base_addr, ISALED0) & ISALED0_LNKST;
 	carrier = netif_carrier_ok(dev);
 
-	if (lnkstat && !carrier)
+	if (lnkstat && !carrier) {
 		netif_carrier_on(dev);
-	else if (!lnkstat && carrier)
+		printk("%s: link up\n", dev->name);
+	} else if (!lnkstat && carrier) {
 		netif_carrier_off(dev);
+		printk("%s: link down\n", dev->name);
+	}
 
 	mod_timer(&priv->timer, jiffies + msecs_to_jiffies(500));
 }
@@ -665,17 +668,25 @@ static void __init am79c961_banner(void)
 		printk(KERN_INFO "%s", version);
 }
 
-static int __init am79c961_init(void)
+static int __init am79c961_probe(struct device *_dev)
 {
+	struct platform_device *pdev = to_platform_device(_dev);
+	struct resource *res;
 	struct net_device *dev;
 	struct dev_priv *priv;
 	int i, ret;
 
+	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	if (!res)
+		return -ENODEV;
+
 	dev = alloc_etherdev(sizeof(struct dev_priv));
 	ret = -ENOMEM;
 	if (!dev)
 		goto out;
 
+	SET_NETDEV_DEV(dev, &pdev->dev);
+
 	priv = netdev_priv(dev);
 
 	/*
@@ -683,8 +694,8 @@ static int __init am79c961_init(void)
 	 * The PNP initialisation should have been
 	 * done by the ether bootp loader.
 	 */
-	dev->base_addr = 0x220;
-	dev->irq = IRQ_EBSA110_ETHERNET;
+	dev->base_addr = res->start;
+	dev->irq = platform_get_irq(pdev, 0);
 
     	ret = -ENODEV;
 	if (!request_region(dev->base_addr, 0x18, dev->name))
@@ -705,11 +716,11 @@ static int __init am79c961_init(void)
 	    inb(dev->base_addr + 4) != 0x2b)
 	    	goto release;
 
-	am79c961_banner();
-
 	for (i = 0; i < 6; i++)
 		dev->dev_addr[i] = inb(dev->base_addr + i * 2) & 0xff;
 
+	am79c961_banner();
+
 	spin_lock_init(&priv->chip_lock);
 	init_timer(&priv->timer);
 	priv->timer.data = (unsigned long)dev;
@@ -732,6 +743,7 @@ static int __init am79c961_init(void)
 	if (ret == 0) {
 		printk(KERN_INFO "%s: ether address ", dev->name);
 
+		/* Retrive and print the ethernet address. */
 		for (i = 0; i < 6; i++)
 			printk (i == 5 ? "%02x\n" : "%02x:", dev->dev_addr[i]);
 
@@ -746,4 +758,15 @@ out:
 	return ret;
 }
 
+static struct device_driver am79c961_driver = {
+	.name		= "am79c961",
+	.bus		= &platform_bus_type,
+	.probe		= am79c961_probe,
+};
+
+static int __init am79c961_init(void)
+{
+	return driver_register(&am79c961_driver);
+}
+
 __initcall(am79c961_init);
diff --git a/drivers/net/arm/am79c961a.h b/drivers/net/arm/am79c961a.h
index 1e9b05050cb..6a49ac7f6d4 100644
--- a/drivers/net/arm/am79c961a.h
+++ b/drivers/net/arm/am79c961a.h
@@ -143,6 +143,4 @@ struct dev_priv {
     struct timer_list	timer;
 };
 
-extern int	am79c961_probe (struct net_device *dev);
-
 #endif
diff --git a/include/asm-arm/arch-ixp2000/enp2611.h b/include/asm-arm/arch-ixp2000/enp2611.h
index 31ae8867496..95128d9f502 100644
--- a/include/asm-arm/arch-ixp2000/enp2611.h
+++ b/include/asm-arm/arch-ixp2000/enp2611.h
@@ -21,8 +21,20 @@
 #ifndef __ENP2611_H
 #define __ENP2611_H
 
-#define ENP2611_GPIO_SCL	0x07
-#define ENP2611_GPIO_SDA	0x06
+#define ENP2611_CALEB_PHYS_BASE		0xc5000000
+#define ENP2611_CALEB_VIRT_BASE		0xfe000000
+#define ENP2611_CALEB_SIZE		0x00100000
+
+#define ENP2611_PM3386_0_PHYS_BASE	0xc6000000
+#define ENP2611_PM3386_0_VIRT_BASE	0xfe100000
+#define ENP2611_PM3386_0_SIZE		0x00100000
+
+#define ENP2611_PM3386_1_PHYS_BASE	0xc6400000
+#define ENP2611_PM3386_1_VIRT_BASE	0xfe200000
+#define ENP2611_PM3386_1_SIZE		0x00100000
+
+#define ENP2611_GPIO_SCL		7
+#define ENP2611_GPIO_SDA		6
 
 
 #endif
diff --git a/include/asm-arm/arch-ixp2000/ixp2000-regs.h b/include/asm-arm/arch-ixp2000/ixp2000-regs.h
index def089d693d..fc5ac6aec4f 100644
--- a/include/asm-arm/arch-ixp2000/ixp2000-regs.h
+++ b/include/asm-arm/arch-ixp2000/ixp2000-regs.h
@@ -59,14 +59,15 @@
 #define	IXP2000_CAP_SIZE		0x00100000
 
 /*
- * Addresses for specific on-chip peripherals
+ * Addresses for specific on-chip peripherals.
  */
 #define	IXP2000_SLOWPORT_CSR_VIRT_BASE	0xfef80000
 #define	IXP2000_GLOBAL_REG_VIRT_BASE	0xfef04000
 #define	IXP2000_UART_PHYS_BASE		0xc0030000
 #define	IXP2000_UART_VIRT_BASE		0xfef30000
 #define	IXP2000_TIMER_VIRT_BASE		0xfef20000
-#define	IXP2000_GPIO_VIRT_BASE		0Xfef10000
+#define	IXP2000_UENGINE_CSR_VIRT_BASE	0xfef18000
+#define	IXP2000_GPIO_VIRT_BASE		0xfef10000
 
 /*
  * Devices outside of the 0xc0000000 -> 0xc0100000 range.  The virtual
@@ -252,7 +253,7 @@
 #define IXP2000_PCI_XSCALE_INT_ENABLE	IXP2000_PCI_CSR(0x15C)
 
 #define IXP2000_PCICNTL_PNR		(1<<17)	/* PCI not Reset bit of PCI_CONTROL */
-#define IXP2000_PCICNTL_PCF		(1<<28)	/* PCI Centrolfunction bit */
+#define IXP2000_PCICNTL_PCF		(1<<28)	/* PCI Central function bit */
 #define IXP2000_XSCALE_INT		(1<<1)	/* Interrupt from XScale to PCI */
 
 /* These are from the IRQ register in the PCI ISR register */
diff --git a/include/asm-arm/arch-ixp2000/system.h b/include/asm-arm/arch-ixp2000/system.h
index 4f489cc0dfa..ddbbb34b5f9 100644
--- a/include/asm-arm/arch-ixp2000/system.h
+++ b/include/asm-arm/arch-ixp2000/system.h
@@ -26,29 +26,24 @@ static inline void arch_reset(char mode)
 	 * RedBoot bank.
 	 */
 	if (machine_is_ixdp2401()) {
-		*IXDP2X01_CPLD_FLASH_REG = ((0 >> IXDP2X01_FLASH_WINDOW_BITS)
-						| IXDP2X01_CPLD_FLASH_INTERN);
-		*IXDP2X01_CPLD_RESET_REG = 0xffffffff;
+		ixp2000_reg_write(IXDP2X01_CPLD_FLASH_REG,
+					((0 >> IXDP2X01_FLASH_WINDOW_BITS)
+						| IXDP2X01_CPLD_FLASH_INTERN));
+		ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0xffffffff);
 	}
 
 	/*
 	 * On IXDP2801 we need to write this magic sequence to the CPLD
 	 * to cause a complete reset of the CPU and all external devices
-	 * and moves the flash bank register back to 0.
+	 * and move the flash bank register back to 0.
 	 */
 	if (machine_is_ixdp2801()) {
 		unsigned long reset_reg = *IXDP2X01_CPLD_RESET_REG;
+
 		reset_reg = 0x55AA0000 | (reset_reg & 0x0000FFFF);
-		*IXDP2X01_CPLD_RESET_REG = reset_reg;
-		mb();
-		*IXDP2X01_CPLD_RESET_REG = 0x80000000;
+		ixp2000_reg_write(IXDP2X01_CPLD_RESET_REG, reset_reg);
+		ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0x80000000);
 	}
 
-	/*
-	 * We do a reset all if we are PCI master. We could be a slave and we
-	 * don't want to do anything funky on the PCI bus.
-	 */
-	if (*IXP2000_STRAP_OPTIONS & CFG_PCI_BOOT_HOST) {
-		*(IXP2000_RESET0) |= (RSTALL);
-	}
+	ixp2000_reg_wrb(IXP2000_RESET0, RSTALL);
 }
diff --git a/include/asm-arm/arch-ixp2000/uengine.h b/include/asm-arm/arch-ixp2000/uengine.h
new file mode 100644
index 00000000000..b442d65c659
--- /dev/null
+++ b/include/asm-arm/arch-ixp2000/uengine.h
@@ -0,0 +1,62 @@
+/*
+ * Generic library functions for the microengines found on the Intel
+ * IXP2000 series of network processors.
+ *
+ * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
+ * Dedicated to Marija Kulikova.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as
+ * published by the Free Software Foundation; either version 2.1 of the
+ * License, or (at your option) any later version.
+ */
+
+#ifndef __IXP2000_UENGINE_H
+#define __IXP2000_UENGINE_H
+
+extern u32 ixp2000_uengine_mask;
+
+struct ixp2000_uengine_code
+{
+	u32	cpu_model_bitmask;
+	u8	cpu_min_revision;
+	u8	cpu_max_revision;
+
+	u32	uengine_parameters;
+
+	struct ixp2000_reg_value {
+		int	reg;
+		u32	value;
+	} *initial_reg_values;
+
+	int	num_insns;
+	u8	*insns;
+};
+
+u32 ixp2000_uengine_csr_read(int uengine, int offset);
+void ixp2000_uengine_csr_write(int uengine, int offset, u32 value);
+void ixp2000_uengine_reset(u32 uengine_mask);
+void ixp2000_uengine_set_mode(int uengine, u32 mode);
+void ixp2000_uengine_load_microcode(int uengine, u8 *ucode, int insns);
+void ixp2000_uengine_init_context(int uengine, int context, int pc);
+void ixp2000_uengine_start_contexts(int uengine, u8 ctx_mask);
+void ixp2000_uengine_stop_contexts(int uengine, u8 ctx_mask);
+int ixp2000_uengine_load(int uengine, struct ixp2000_uengine_code *c);
+
+#define IXP2000_UENGINE_8_CONTEXTS		0x00000000
+#define IXP2000_UENGINE_4_CONTEXTS		0x80000000
+#define IXP2000_UENGINE_PRN_UPDATE_EVERY	0x40000000
+#define IXP2000_UENGINE_PRN_UPDATE_ON_ACCESS	0x00000000
+#define IXP2000_UENGINE_NN_FROM_SELF		0x00100000
+#define IXP2000_UENGINE_NN_FROM_PREVIOUS	0x00000000
+#define IXP2000_UENGINE_ASSERT_EMPTY_AT_3	0x000c0000
+#define IXP2000_UENGINE_ASSERT_EMPTY_AT_2	0x00080000
+#define IXP2000_UENGINE_ASSERT_EMPTY_AT_1	0x00040000
+#define IXP2000_UENGINE_ASSERT_EMPTY_AT_0	0x00000000
+#define IXP2000_UENGINE_LM_ADDR1_GLOBAL		0x00020000
+#define IXP2000_UENGINE_LM_ADDR1_PER_CONTEXT	0x00000000
+#define IXP2000_UENGINE_LM_ADDR0_GLOBAL		0x00010000
+#define IXP2000_UENGINE_LM_ADDR0_PER_CONTEXT	0x00000000
+
+
+#endif
diff --git a/include/asm-arm/arch-realview/debug-macro.S b/include/asm-arm/arch-realview/debug-macro.S
new file mode 100644
index 00000000000..ed28bd01223
--- /dev/null
+++ b/include/asm-arm/arch-realview/debug-macro.S
@@ -0,0 +1,38 @@
+/* linux/include/asm-arm/arch-realview/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <asm/hardware/amba_serial.h>
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx,      #0x10000000
+		movne	\rx,      #0xf1000000	@ virtual base
+		orr	\rx, \rx, #0x00009000
+		.endm
+
+		.macro	senduart,rd,rx
+		strb	\rd, [\rx, #UART01x_DR]
+		.endm
+
+		.macro	waituart,rd,rx
+1001:		ldr	\rd, [\rx, #0x18]	@ UARTFLG
+		tst	\rd, #1 << 5		@ UARTFLGUTXFF - 1 when full
+		bne	1001b
+		.endm
+
+		.macro	busyuart,rd,rx
+1001:		ldr	\rd, [\rx, #0x18]	@ UARTFLG
+		tst	\rd, #1 << 3		@ UARTFLGUBUSY - 1 when busy
+		bne	1001b
+		.endm
diff --git a/include/asm-arm/arch-realview/dma.h b/include/asm-arm/arch-realview/dma.h
new file mode 100644
index 00000000000..744491a74bd
--- /dev/null
+++ b/include/asm-arm/arch-realview/dma.h
@@ -0,0 +1,27 @@
+/*
+ *  linux/include/asm-arm/arch-realview/dma.h
+ *
+ *  Copyright (C) 2003 ARM Limited.
+ *  Copyright (C) 1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#define MAX_DMA_ADDRESS		0xffffffff
+#define MAX_DMA_CHANNELS	0
+
+#endif /* _ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-realview/entry-macro.S b/include/asm-arm/arch-realview/entry-macro.S
new file mode 100644
index 00000000000..2712ba77bb3
--- /dev/null
+++ b/include/asm-arm/arch-realview/entry-macro.S
@@ -0,0 +1,49 @@
+/*
+ * include/asm-arm/arch-realview/entry-macro.S
+ *
+ * Low-level IRQ helper macros for RealView platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <asm/hardware/gic.h>
+
+		.macro	disable_fiq
+		.endm
+
+		/*
+		 * The interrupt numbering scheme is defined in the
+		 * interrupt controller spec.  To wit:
+		 *
+		 * Interrupts 0-15 are IPI
+		 * 16-28 are reserved
+		 * 29-31 are local.  We allow 30 to be used for the watchdog.
+		 * 32-1020 are global
+		 * 1021-1022 are reserved
+		 * 1023 is "spurious" (no interrupt)
+		 *
+		 * For now, we ignore all local interrupts so only return an interrupt if it's
+		 * between 30 and 1020.  The test_for_ipi routine below will pick up on IPIs.
+		 *
+		 * A simple read from the controller will tell us the number of the highest
+                 * priority enabled interrupt.  We then just need to check whether it is in the
+		 * valid range for an IRQ (30-1020 inclusive).
+		 */
+
+		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+		ldr     \base, =IO_ADDRESS(REALVIEW_GIC_CPU_BASE)
+		ldr     \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */
+
+		ldr	\tmp, =1021
+
+		bic     \irqnr, \irqstat, #0x1c00
+
+		cmp     \irqnr, #29
+		cmpcc	\irqnr, \irqnr
+		cmpne	\irqnr, \tmp
+		cmpcs	\irqnr, \irqnr
+
+		.endm
diff --git a/include/asm-arm/arch-realview/hardware.h b/include/asm-arm/arch-realview/hardware.h
new file mode 100644
index 00000000000..67879cdb6ef
--- /dev/null
+++ b/include/asm-arm/arch-realview/hardware.h
@@ -0,0 +1,31 @@
+/*
+ *  linux/include/asm-arm/arch-realview/hardware.h
+ *
+ *  This file contains the hardware definitions of the RealView boards.
+ *
+ *  Copyright (C) 2003 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include <asm/arch/platform.h>
+
+/* macro to get at IO space when running virtually */
+#define IO_ADDRESS(x)		(((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000)
+
+#endif
diff --git a/include/asm-arm/arch-realview/io.h b/include/asm-arm/arch-realview/io.h
new file mode 100644
index 00000000000..d444a68ac33
--- /dev/null
+++ b/include/asm-arm/arch-realview/io.h
@@ -0,0 +1,34 @@
+/*
+ *  linux/include/asm-arm/arch-realview/io.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+static inline void __iomem *__io(unsigned long addr)
+{
+	return (void __iomem *)addr;
+}
+
+#define __io(a)			__io(a)
+#define __mem_pci(a)		(a)
+#define __mem_isa(a)		(a)
+
+#endif
diff --git a/include/asm-arm/arch-realview/irqs.h b/include/asm-arm/arch-realview/irqs.h
new file mode 100644
index 00000000000..ff376494e5b
--- /dev/null
+++ b/include/asm-arm/arch-realview/irqs.h
@@ -0,0 +1,103 @@
+/*
+ *  linux/include/asm-arm/arch-realview/irqs.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <asm/arch/platform.h>
+
+/* 
+ *  IRQ interrupts definitions are the same the INT definitions
+ *  held within platform.h
+ */
+#define IRQ_GIC_START		32
+#define IRQ_WDOGINT		(IRQ_GIC_START + INT_WDOGINT)
+#define IRQ_SOFTINT		(IRQ_GIC_START + INT_SOFTINT)
+#define IRQ_COMMRx		(IRQ_GIC_START + INT_COMMRx)
+#define IRQ_COMMTx		(IRQ_GIC_START + INT_COMMTx)
+#define IRQ_TIMERINT0_1		(IRQ_GIC_START + INT_TIMERINT0_1)
+#define IRQ_TIMERINT2_3		(IRQ_GIC_START + INT_TIMERINT2_3)
+#define IRQ_GPIOINT0		(IRQ_GIC_START + INT_GPIOINT0)
+#define IRQ_GPIOINT1		(IRQ_GIC_START + INT_GPIOINT1)
+#define IRQ_GPIOINT2		(IRQ_GIC_START + INT_GPIOINT2)
+#define IRQ_GPIOINT3		(IRQ_GIC_START + INT_GPIOINT3)
+#define IRQ_RTCINT		(IRQ_GIC_START + INT_RTCINT)
+#define IRQ_SSPINT		(IRQ_GIC_START + INT_SSPINT)
+#define IRQ_UARTINT0		(IRQ_GIC_START + INT_UARTINT0)
+#define IRQ_UARTINT1		(IRQ_GIC_START + INT_UARTINT1)
+#define IRQ_UARTINT2		(IRQ_GIC_START + INT_UARTINT2)
+#define IRQ_UART3		(IRQ_GIC_START + INT_UARTINT3)
+#define IRQ_SCIINT		(IRQ_GIC_START + INT_SCIINT)
+#define IRQ_CLCDINT		(IRQ_GIC_START + INT_CLCDINT)
+#define IRQ_DMAINT		(IRQ_GIC_START + INT_DMAINT)
+#define IRQ_PWRFAILINT 		(IRQ_GIC_START + INT_PWRFAILINT)
+#define IRQ_MBXINT		(IRQ_GIC_START + INT_MBXINT)
+#define IRQ_GNDINT		(IRQ_GIC_START + INT_GNDINT)
+#define IRQ_MMCI0B 		(IRQ_GIC_START + INT_MMCI0B)
+#define IRQ_MMCI1B 		(IRQ_GIC_START + INT_MMCI1B)
+#define IRQ_KMI0		(IRQ_GIC_START + INT_KMI0)
+#define IRQ_KMI1		(IRQ_GIC_START + INT_KMI1)
+#define IRQ_SCI3		(IRQ_GIC_START + INT_SCI3)
+#define IRQ_CLCD		(IRQ_GIC_START + INT_CLCD)
+#define IRQ_TOUCH		(IRQ_GIC_START + INT_TOUCH)
+#define IRQ_KEYPAD 		(IRQ_GIC_START + INT_KEYPAD)
+#define IRQ_DoC			(IRQ_GIC_START + INT_DoC)
+#define IRQ_MMCI0A 		(IRQ_GIC_START + INT_MMCI0A)
+#define IRQ_MMCI1A 		(IRQ_GIC_START + INT_MMCI1A)
+#define IRQ_AACI		(IRQ_GIC_START + INT_AACI)
+#define IRQ_ETH			(IRQ_GIC_START + INT_ETH)
+#define IRQ_USB			(IRQ_GIC_START + INT_USB)
+
+#define IRQMASK_WDOGINT		INTMASK_WDOGINT
+#define IRQMASK_SOFTINT		INTMASK_SOFTINT
+#define IRQMASK_COMMRx 		INTMASK_COMMRx
+#define IRQMASK_COMMTx 		INTMASK_COMMTx
+#define IRQMASK_TIMERINT0_1	INTMASK_TIMERINT0_1
+#define IRQMASK_TIMERINT2_3	INTMASK_TIMERINT2_3
+#define IRQMASK_GPIOINT0	INTMASK_GPIOINT0
+#define IRQMASK_GPIOINT1	INTMASK_GPIOINT1
+#define IRQMASK_GPIOINT2	INTMASK_GPIOINT2
+#define IRQMASK_GPIOINT3	INTMASK_GPIOINT3
+#define IRQMASK_RTCINT 		INTMASK_RTCINT
+#define IRQMASK_SSPINT 		INTMASK_SSPINT
+#define IRQMASK_UARTINT0	INTMASK_UARTINT0
+#define IRQMASK_UARTINT1	INTMASK_UARTINT1
+#define IRQMASK_UARTINT2	INTMASK_UARTINT2
+#define IRQMASK_SCIINT 		INTMASK_SCIINT
+#define IRQMASK_CLCDINT		INTMASK_CLCDINT
+#define IRQMASK_DMAINT 		INTMASK_DMAINT
+#define IRQMASK_PWRFAILINT	INTMASK_PWRFAILINT
+#define IRQMASK_MBXINT 		INTMASK_MBXINT
+#define IRQMASK_GNDINT 		INTMASK_GNDINT
+#define IRQMASK_MMCI0B		INTMASK_MMCI0B
+#define IRQMASK_MMCI1B		INTMASK_MMCI1B
+#define IRQMASK_KMI0		INTMASK_KMI0
+#define IRQMASK_KMI1		INTMASK_KMI1
+#define IRQMASK_SCI3		INTMASK_SCI3
+#define IRQMASK_UART3		INTMASK_UART3
+#define IRQMASK_CLCD		INTMASK_CLCD
+#define IRQMASK_TOUCH		INTMASK_TOUCH
+#define IRQMASK_KEYPAD		INTMASK_KEYPAD
+#define IRQMASK_DoC		INTMASK_DoC
+#define IRQMASK_MMCI0A		INTMASK_MMCI0A
+#define IRQMASK_MMCI1A		INTMASK_MMCI1A
+#define IRQMASK_AACI		INTMASK_AACI
+#define IRQMASK_ETH		INTMASK_ETH
+#define IRQMASK_USB		INTMASK_USB
+
+#define NR_IRQS			(IRQ_GIC_START + 64)
diff --git a/include/asm-arm/arch-realview/memory.h b/include/asm-arm/arch-realview/memory.h
new file mode 100644
index 00000000000..99667d5cc61
--- /dev/null
+++ b/include/asm-arm/arch-realview/memory.h
@@ -0,0 +1,38 @@
+/*
+ *  linux/include/asm-arm/arch-realview/memory.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET		(0x00000000UL)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *              address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *              to an address that the kernel can use.
+ */
+#define __virt_to_bus(x)	((x) - PAGE_OFFSET)
+#define __bus_to_virt(x)	((x) + PAGE_OFFSET)
+
+#endif
diff --git a/include/asm-arm/arch-realview/param.h b/include/asm-arm/arch-realview/param.h
new file mode 100644
index 00000000000..89b1235d32b
--- /dev/null
+++ b/include/asm-arm/arch-realview/param.h
@@ -0,0 +1,19 @@
+/*
+ *  linux/include/asm-arm/arch-realview/param.h
+ *
+ *  Copyright (C) 2002 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
diff --git a/include/asm-arm/arch-realview/platform.h b/include/asm-arm/arch-realview/platform.h
new file mode 100644
index 00000000000..4b6de13a6b9
--- /dev/null
+++ b/include/asm-arm/arch-realview/platform.h
@@ -0,0 +1,395 @@
+/*
+ * linux/include/asm-arm/arch-realview/platform.h
+ *
+ * Copyright (c) ARM Limited 2003.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __address_h
+#define __address_h                     1
+
+/*
+ * Memory definitions
+ */
+#define REALVIEW_BOOT_ROM_LO          0x30000000		/* DoC Base (64Mb)...*/
+#define REALVIEW_BOOT_ROM_HI          0x30000000
+#define REALVIEW_BOOT_ROM_BASE        REALVIEW_BOOT_ROM_HI	 /*  Normal position */
+#define REALVIEW_BOOT_ROM_SIZE        SZ_64M
+
+#define REALVIEW_SSRAM_BASE           /* REALVIEW_SSMC_BASE ? */
+#define REALVIEW_SSRAM_SIZE           SZ_2M
+
+#define REALVIEW_FLASH_BASE           0x40000000
+#define REALVIEW_FLASH_SIZE           SZ_64M
+
+/* 
+ *  SDRAM
+ */
+#define REALVIEW_SDRAM_BASE           0x00000000
+
+/* 
+ *  Logic expansion modules
+ * 
+ */
+
+
+/* ------------------------------------------------------------------------
+ *  RealView Registers
+ * ------------------------------------------------------------------------
+ * 
+ */
+#define REALVIEW_SYS_ID_OFFSET               0x00
+#define REALVIEW_SYS_SW_OFFSET               0x04
+#define REALVIEW_SYS_LED_OFFSET              0x08
+#define REALVIEW_SYS_OSC0_OFFSET             0x0C
+
+#define REALVIEW_SYS_OSC1_OFFSET             0x10
+#define REALVIEW_SYS_OSC2_OFFSET             0x14
+#define REALVIEW_SYS_OSC3_OFFSET             0x18
+#define REALVIEW_SYS_OSC4_OFFSET             0x1C	/* OSC1 for RealView/AB */
+
+#define REALVIEW_SYS_LOCK_OFFSET             0x20
+#define REALVIEW_SYS_100HZ_OFFSET            0x24
+#define REALVIEW_SYS_CFGDATA1_OFFSET         0x28
+#define REALVIEW_SYS_CFGDATA2_OFFSET         0x2C
+#define REALVIEW_SYS_FLAGS_OFFSET            0x30
+#define REALVIEW_SYS_FLAGSSET_OFFSET         0x30
+#define REALVIEW_SYS_FLAGSCLR_OFFSET         0x34
+#define REALVIEW_SYS_NVFLAGS_OFFSET          0x38
+#define REALVIEW_SYS_NVFLAGSSET_OFFSET       0x38
+#define REALVIEW_SYS_NVFLAGSCLR_OFFSET       0x3C
+#define REALVIEW_SYS_RESETCTL_OFFSET         0x40
+#define REALVIEW_SYS_PCICTL_OFFSET           0x44
+#define REALVIEW_SYS_MCI_OFFSET              0x48
+#define REALVIEW_SYS_FLASH_OFFSET            0x4C
+#define REALVIEW_SYS_CLCD_OFFSET             0x50
+#define REALVIEW_SYS_CLCDSER_OFFSET          0x54
+#define REALVIEW_SYS_BOOTCS_OFFSET           0x58
+#define REALVIEW_SYS_24MHz_OFFSET            0x5C
+#define REALVIEW_SYS_MISC_OFFSET             0x60
+#define REALVIEW_SYS_IOSEL_OFFSET            0x70
+#define REALVIEW_SYS_TEST_OSC0_OFFSET        0x80
+#define REALVIEW_SYS_TEST_OSC1_OFFSET        0x84
+#define REALVIEW_SYS_TEST_OSC2_OFFSET        0x88
+#define REALVIEW_SYS_TEST_OSC3_OFFSET        0x8C
+#define REALVIEW_SYS_TEST_OSC4_OFFSET        0x90
+
+#define REALVIEW_SYS_BASE                    0x10000000
+#define REALVIEW_SYS_ID                      (REALVIEW_SYS_BASE + REALVIEW_SYS_ID_OFFSET)
+#define REALVIEW_SYS_SW                      (REALVIEW_SYS_BASE + REALVIEW_SYS_SW_OFFSET)
+#define REALVIEW_SYS_LED                     (REALVIEW_SYS_BASE + REALVIEW_SYS_LED_OFFSET)
+#define REALVIEW_SYS_OSC0                    (REALVIEW_SYS_BASE + REALVIEW_SYS_OSC0_OFFSET)
+#define REALVIEW_SYS_OSC1                    (REALVIEW_SYS_BASE + REALVIEW_SYS_OSC1_OFFSET)
+
+#define REALVIEW_SYS_LOCK                    (REALVIEW_SYS_BASE + REALVIEW_SYS_LOCK_OFFSET)
+#define REALVIEW_SYS_100HZ                   (REALVIEW_SYS_BASE + REALVIEW_SYS_100HZ_OFFSET)
+#define REALVIEW_SYS_CFGDATA1                (REALVIEW_SYS_BASE + REALVIEW_SYS_CFGDATA1_OFFSET)
+#define REALVIEW_SYS_CFGDATA2                (REALVIEW_SYS_BASE + REALVIEW_SYS_CFGDATA2_OFFSET)
+#define REALVIEW_SYS_FLAGS                   (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGS_OFFSET)
+#define REALVIEW_SYS_FLAGSSET                (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGSSET_OFFSET)
+#define REALVIEW_SYS_FLAGSCLR                (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGSCLR_OFFSET)
+#define REALVIEW_SYS_NVFLAGS                 (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGS_OFFSET)
+#define REALVIEW_SYS_NVFLAGSSET              (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGSSET_OFFSET)
+#define REALVIEW_SYS_NVFLAGSCLR              (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGSCLR_OFFSET)
+#define REALVIEW_SYS_RESETCTL                (REALVIEW_SYS_BASE + REALVIEW_SYS_RESETCTL_OFFSET)
+#define REALVIEW_SYS_PCICTL                  (REALVIEW_SYS_BASE + REALVIEW_SYS_PCICTL_OFFSET)
+#define REALVIEW_SYS_MCI                     (REALVIEW_SYS_BASE + REALVIEW_SYS_MCI_OFFSET)
+#define REALVIEW_SYS_FLASH                   (REALVIEW_SYS_BASE + REALVIEW_SYS_FLASH_OFFSET)
+#define REALVIEW_SYS_CLCD                    (REALVIEW_SYS_BASE + REALVIEW_SYS_CLCD_OFFSET)
+#define REALVIEW_SYS_CLCDSER                 (REALVIEW_SYS_BASE + REALVIEW_SYS_CLCDSER_OFFSET)
+#define REALVIEW_SYS_BOOTCS                  (REALVIEW_SYS_BASE + REALVIEW_SYS_BOOTCS_OFFSET)
+#define REALVIEW_SYS_24MHz                   (REALVIEW_SYS_BASE + REALVIEW_SYS_24MHz_OFFSET)
+#define REALVIEW_SYS_MISC                    (REALVIEW_SYS_BASE + REALVIEW_SYS_MISC_OFFSET)
+#define REALVIEW_SYS_IOSEL                   (REALVIEW_SYS_BASE + REALVIEW_SYS_IOSEL_OFFSET)
+#define REALVIEW_SYS_TEST_OSC0               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC0_OFFSET)
+#define REALVIEW_SYS_TEST_OSC1               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC1_OFFSET)
+#define REALVIEW_SYS_TEST_OSC2               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC2_OFFSET)
+#define REALVIEW_SYS_TEST_OSC3               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC3_OFFSET)
+#define REALVIEW_SYS_TEST_OSC4               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC4_OFFSET)
+
+/* 
+ * Values for REALVIEW_SYS_RESET_CTRL
+ */
+#define REALVIEW_SYS_CTRL_RESET_CONFIGCLR    0x01
+#define REALVIEW_SYS_CTRL_RESET_CONFIGINIT   0x02
+#define REALVIEW_SYS_CTRL_RESET_DLLRESET     0x03
+#define REALVIEW_SYS_CTRL_RESET_PLLRESET     0x04
+#define REALVIEW_SYS_CTRL_RESET_POR          0x05
+#define REALVIEW_SYS_CTRL_RESET_DoC          0x06
+
+#define REALVIEW_SYS_CTRL_LED         (1 << 0)
+
+
+/* ------------------------------------------------------------------------
+ *  RealView control registers
+ * ------------------------------------------------------------------------
+ */
+
+/* 
+ * REALVIEW_IDFIELD
+ *
+ * 31:24 = manufacturer (0x41 = ARM)
+ * 23:16 = architecture (0x08 = AHB system bus, ASB processor bus)
+ * 15:12 = FPGA (0x3 = XVC600 or XVC600E)
+ * 11:4  = build value
+ * 3:0   = revision number (0x1 = rev B (AHB))
+ */
+
+/*
+ * REALVIEW_SYS_LOCK
+ *     control access to SYS_OSCx, SYS_CFGDATAx, SYS_RESETCTL, 
+ *     SYS_CLD, SYS_BOOTCS
+ */
+#define REALVIEW_SYS_LOCK_LOCKED    (1 << 16)
+#define REALVIEW_SYS_LOCKVAL_MASK	0xFFFF		/* write 0xA05F to enable write access */
+
+/*
+ * REALVIEW_SYS_FLASH
+ */
+#define REALVIEW_FLASHPROG_FLVPPEN	(1 << 0)	/* Enable writing to flash */
+
+/*
+ * REALVIEW_INTREG
+ *     - used to acknowledge and control MMCI and UART interrupts 
+ */
+#define REALVIEW_INTREG_WPROT        0x00    /* MMC protection status (no interrupt generated) */
+#define REALVIEW_INTREG_RI0          0x01    /* Ring indicator UART0 is asserted,              */
+#define REALVIEW_INTREG_CARDIN       0x08    /* MMCI card in detect                            */
+                                                /* write 1 to acknowledge and clear               */
+#define REALVIEW_INTREG_RI1          0x02    /* Ring indicator UART1 is asserted,              */
+#define REALVIEW_INTREG_CARDINSERT   0x03    /* Signal insertion of MMC card                   */
+
+/*
+ * REALVIEW peripheral addresses
+ */
+#define REALVIEW_SCTL_BASE            0x10001000	/* System controller */
+#define REALVIEW_I2C_BASE             0x10002000	/* I2C control */
+	/* Reserved 0x10003000 */
+#define REALVIEW_AACI_BASE            0x10004000	/* Audio */
+#define REALVIEW_MMCI0_BASE           0x10005000	/* MMC interface */
+#define REALVIEW_KMI0_BASE            0x10006000	/* KMI interface */
+#define REALVIEW_KMI1_BASE            0x10007000	/* KMI 2nd interface */
+#define REALVIEW_CHAR_LCD_BASE        0x10008000	/* Character LCD */
+#define REALVIEW_UART0_BASE           0x10009000	/* UART 0 */
+#define REALVIEW_UART1_BASE           0x1000A000	/* UART 1 */
+#define REALVIEW_UART2_BASE           0x1000B000	/* UART 2 */
+#define REALVIEW_UART3_BASE           0x1000C000	/* UART 3 */
+#define REALVIEW_SSP_BASE             0x1000D000	/* Synchronous Serial Port */
+#define REALVIEW_SCI_BASE             0x1000E000	/* Smart card controller */
+	/* Reserved 0x1000F000 */
+#define REALVIEW_WATCHDOG_BASE        0x10010000	/* watchdog interface */
+#define REALVIEW_TIMER0_1_BASE        0x10011000	/* Timer 0 and 1 */
+#define REALVIEW_TIMER2_3_BASE        0x10012000	/* Timer 2 and 3 */
+#define REALVIEW_GPIO0_BASE           0x10013000	/* GPIO port 0 */
+#define REALVIEW_GPIO1_BASE           0x10014000	/* GPIO port 1 */
+#define REALVIEW_GPIO2_BASE           0x10015000	/* GPIO port 2 */
+	/* Reserved 0x10016000 */
+#define REALVIEW_RTC_BASE             0x10017000	/* Real Time Clock */
+#define REALVIEW_DMC_BASE             0x10018000	/* DMC configuration */
+#define REALVIEW_PCI_CORE_BASE        0x10019000	/* PCI configuration */
+	/* Reserved 0x1001A000 - 0x1001FFFF */
+#define REALVIEW_CLCD_BASE            0x10020000	/* CLCD */
+#define REALVIEW_DMAC_BASE            0x10030000	/* DMA controller */
+#define REALVIEW_GIC_CPU_BASE         0x10040000	/* Generic interrupt controller CPU interface */
+#define REALVIEW_GIC_DIST_BASE        0x10041000	/* Generic interrupt controller distributor */
+#define REALVIEW_SMC_BASE             0x10080000	/* SMC */
+	/* Reserved 0x10090000 - 0x100EFFFF */
+
+#define REALVIEW_ETH_BASE             0x4E000000	/* Ethernet */
+
+/* PCI space */
+#define REALVIEW_PCI_BASE             0x41000000	/* PCI Interface */
+#define REALVIEW_PCI_CFG_BASE	      0x42000000
+#define REALVIEW_PCI_MEM_BASE0        0x44000000
+#define REALVIEW_PCI_MEM_BASE1        0x50000000
+#define REALVIEW_PCI_MEM_BASE2        0x60000000
+/* Sizes of above maps */
+#define REALVIEW_PCI_BASE_SIZE	       0x01000000
+#define REALVIEW_PCI_CFG_BASE_SIZE    0x02000000
+#define REALVIEW_PCI_MEM_BASE0_SIZE   0x0c000000	/* 32Mb */
+#define REALVIEW_PCI_MEM_BASE1_SIZE   0x10000000	/* 256Mb */
+#define REALVIEW_PCI_MEM_BASE2_SIZE   0x10000000	/* 256Mb */
+
+#define REALVIEW_SDRAM67_BASE         0x70000000	/* SDRAM banks 6 and 7 */
+#define REALVIEW_LT_BASE              0x80000000	/* Logic Tile expansion */
+
+/*
+ * Disk on Chip
+ */
+#define REALVIEW_DOC_BASE             0x2C000000
+#define REALVIEW_DOC_SIZE             (16 << 20)
+#define REALVIEW_DOC_PAGE_SIZE        512
+#define REALVIEW_DOC_TOTAL_PAGES     (DOC_SIZE / PAGE_SIZE)
+
+#define ERASE_UNIT_PAGES    32
+#define START_PAGE          0x80
+
+/* 
+ *  LED settings, bits [7:0]
+ */
+#define REALVIEW_SYS_LED0             (1 << 0)
+#define REALVIEW_SYS_LED1             (1 << 1)
+#define REALVIEW_SYS_LED2             (1 << 2)
+#define REALVIEW_SYS_LED3             (1 << 3)
+#define REALVIEW_SYS_LED4             (1 << 4)
+#define REALVIEW_SYS_LED5             (1 << 5)
+#define REALVIEW_SYS_LED6             (1 << 6)
+#define REALVIEW_SYS_LED7             (1 << 7)
+
+#define ALL_LEDS                  0xFF
+
+#define LED_BANK                  REALVIEW_SYS_LED
+
+/* 
+ * Control registers
+ */
+#define REALVIEW_IDFIELD_OFFSET	0x0	/* RealView build information */
+#define REALVIEW_FLASHPROG_OFFSET	0x4	/* Flash devices */
+#define REALVIEW_INTREG_OFFSET		0x8	/* Interrupt control */
+#define REALVIEW_DECODE_OFFSET		0xC	/* Fitted logic modules */
+
+/* ------------------------------------------------------------------------
+ *  Interrupts - bit assignment (primary)
+ * ------------------------------------------------------------------------
+ */
+#define INT_WDOGINT			0	/* Watchdog timer */
+#define INT_SOFTINT			1	/* Software interrupt */
+#define INT_COMMRx			2	/* Debug Comm Rx interrupt */
+#define INT_COMMTx			3	/* Debug Comm Tx interrupt */
+#define INT_TIMERINT0_1			4	/* Timer 0 and 1 */
+#define INT_TIMERINT2_3			5	/* Timer 2 and 3 */
+#define INT_GPIOINT0			6	/* GPIO 0 */
+#define INT_GPIOINT1			7	/* GPIO 1 */
+#define INT_GPIOINT2			8	/* GPIO 2 */
+/* 9 reserved */
+#define INT_RTCINT			10	/* Real Time Clock */
+#define INT_SSPINT			11	/* Synchronous Serial Port */
+#define INT_UARTINT0			12	/* UART 0 on development chip */
+#define INT_UARTINT1			13	/* UART 1 on development chip */
+#define INT_UARTINT2			14	/* UART 2 on development chip */
+#define INT_UARTINT3			15	/* UART 3 on development chip */
+#define INT_SCIINT			16	/* Smart Card Interface */
+#define INT_MMCI0A			17	/* Multimedia Card 0A */
+#define INT_MMCI0B			18	/* Multimedia Card 0B */
+#define INT_AACI			19	/* Audio Codec */
+#define INT_KMI0			20	/* Keyboard/Mouse port 0 */
+#define INT_KMI1			21	/* Keyboard/Mouse port 1 */
+#define INT_CHARLCD			22	/* Character LCD */
+#define INT_CLCDINT			23	/* CLCD controller */
+#define INT_DMAINT			24	/* DMA controller */
+#define INT_PWRFAILINT			25	/* Power failure */
+#define INT_PISMO			26
+#define INT_DoC				27	/* Disk on Chip memory controller */
+#define INT_ETH				28	/* Ethernet controller */
+#define INT_USB				29	/* USB controller */
+#define INT_TSPENINT			30	/* Touchscreen pen */
+#define INT_TSKPADINT			31	/* Touchscreen keypad */
+
+/* 
+ *  Interrupt bit positions
+ * 
+ */
+#define INTMASK_WDOGINT			(1 << INT_WDOGINT)
+#define INTMASK_SOFTINT			(1 << INT_SOFTINT)
+#define INTMASK_COMMRx			(1 << INT_COMMRx)
+#define INTMASK_COMMTx			(1 << INT_COMMTx)
+#define INTMASK_TIMERINT0_1		(1 << INT_TIMERINT0_1)
+#define INTMASK_TIMERINT2_3		(1 << INT_TIMERINT2_3)
+#define INTMASK_GPIOINT0		(1 << INT_GPIOINT0)
+#define INTMASK_GPIOINT1		(1 << INT_GPIOINT1)
+#define INTMASK_GPIOINT2		(1 << INT_GPIOINT2)
+#define INTMASK_RTCINT			(1 << INT_RTCINT)
+#define INTMASK_SSPINT			(1 << INT_SSPINT)
+#define INTMASK_UARTINT0		(1 << INT_UARTINT0)
+#define INTMASK_UARTINT1		(1 << INT_UARTINT1)
+#define INTMASK_UARTINT2		(1 << INT_UARTINT2)
+#define INTMASK_UARTINT3		(1 << INT_UARTINT3)
+#define INTMASK_SCIINT			(1 << INT_SCIINT)
+#define INTMASK_MMCI0A			(1 << INT_MMCI0A)
+#define INTMASK_MMCI0B			(1 << INT_MMCI0B)
+#define INTMASK_AACI			(1 << INT_AACI)
+#define INTMASK_KMI0			(1 << INT_KMI0)
+#define INTMASK_KMI1			(1 << INT_KMI1)
+#define INTMASK_CHARLCD			(1 << INT_CHARLCD)
+#define INTMASK_CLCDINT			(1 << INT_CLCDINT)
+#define INTMASK_DMAINT			(1 << INT_DMAINT)
+#define INTMASK_PWRFAILINT		(1 << INT_PWRFAILINT)
+#define INTMASK_PISMO			(1 << INT_PISMO)
+#define INTMASK_DoC			(1 << INT_DoC)
+#define INTMASK_ETH			(1 << INT_ETH)
+#define INTMASK_USB			(1 << INT_USB)
+#define INTMASK_TSPENINT		(1 << INT_TSPENINT)
+#define INTMASK_TSKPADINT		(1 << INT_TSKPADINT)
+
+#define MAXIRQNUM                       31
+#define MAXFIQNUM                       31
+#define MAXSWINUM                       31
+
+/* 
+ *  Application Flash
+ * 
+ */
+#define FLASH_BASE                      REALVIEW_FLASH_BASE
+#define FLASH_SIZE                      REALVIEW_FLASH_SIZE
+#define FLASH_END                       (FLASH_BASE + FLASH_SIZE - 1)
+#define FLASH_BLOCK_SIZE                SZ_128K
+
+/* 
+ *  Boot Flash
+ * 
+ */
+#define EPROM_BASE                      REALVIEW_BOOT_ROM_HI
+#define EPROM_SIZE                      REALVIEW_BOOT_ROM_SIZE
+#define EPROM_END                       (EPROM_BASE + EPROM_SIZE - 1)
+
+/* 
+ *  Clean base - dummy
+ * 
+ */
+#define CLEAN_BASE                      EPROM_BASE
+
+/*
+ * System controller bit assignment
+ */
+#define REALVIEW_REFCLK	0
+#define REALVIEW_TIMCLK	1
+
+#define REALVIEW_TIMER1_EnSel	15
+#define REALVIEW_TIMER2_EnSel	17
+#define REALVIEW_TIMER3_EnSel	19
+#define REALVIEW_TIMER4_EnSel	21
+
+
+#define MAX_TIMER                       2
+#define MAX_PERIOD                      699050
+#define TICKS_PER_uSEC                  1
+
+/* 
+ *  These are useconds NOT ticks.  
+ * 
+ */
+#define mSEC_1                          1000
+#define mSEC_5                          (mSEC_1 * 5)
+#define mSEC_10                         (mSEC_1 * 10)
+#define mSEC_25                         (mSEC_1 * 25)
+#define SEC_1                           (mSEC_1 * 1000)
+
+#define REALVIEW_CSR_BASE             0x10000000
+#define REALVIEW_CSR_SIZE             0x10000000
+
+#endif
+
+/* 	END */
diff --git a/include/asm-arm/arch-realview/system.h b/include/asm-arm/arch-realview/system.h
new file mode 100644
index 00000000000..9f8fcbca086
--- /dev/null
+++ b/include/asm-arm/arch-realview/system.h
@@ -0,0 +1,51 @@
+/*
+ *  linux/include/asm-arm/arch-realview/system.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/arch/platform.h>
+
+static inline void arch_idle(void)
+{
+	/*
+	 * This should do all the clock switching
+	 * and wait for interrupt tricks
+	 */
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	unsigned int hdr_ctrl =	(IO_ADDRESS(REALVIEW_SYS_BASE) + REALVIEW_SYS_RESETCTL_OFFSET);
+	unsigned int val;
+
+	/*
+	 * To reset, we hit the on-board reset register
+	 * in the system FPGA
+	 */
+	val = __raw_readl(hdr_ctrl);
+	val |= REALVIEW_SYS_CTRL_RESET_CONFIGCLR;
+	__raw_writel(val, hdr_ctrl);
+}
+
+#endif
diff --git a/include/asm-arm/arch-realview/timex.h b/include/asm-arm/arch-realview/timex.h
new file mode 100644
index 00000000000..5b9d82d0a5e
--- /dev/null
+++ b/include/asm-arm/arch-realview/timex.h
@@ -0,0 +1,23 @@
+/*
+ *  linux/include/asm-arm/arch-realview/timex.h
+ *
+ *  RealView architecture timex specifications
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define CLOCK_TICK_RATE		(50000000 / 16)
diff --git a/include/asm-arm/arch-realview/uncompress.h b/include/asm-arm/arch-realview/uncompress.h
new file mode 100644
index 00000000000..b5e4d360665
--- /dev/null
+++ b/include/asm-arm/arch-realview/uncompress.h
@@ -0,0 +1,54 @@
+/*
+ *  linux/include/asm-arm/arch-realview/uncompress.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <asm/hardware.h>
+
+#define AMBA_UART_DR	(*(volatile unsigned char *) (REALVIEW_UART0_BASE + 0x00))
+#define AMBA_UART_LCRH	(*(volatile unsigned char *) (REALVIEW_UART0_BASE + 0x2c))
+#define AMBA_UART_CR	(*(volatile unsigned char *) (REALVIEW_UART0_BASE + 0x30))
+#define AMBA_UART_FR	(*(volatile unsigned char *) (REALVIEW_UART0_BASE + 0x18))
+
+/*
+ * This does not append a newline
+ */
+static void putstr(const char *s)
+{
+	while (*s) {
+		while (AMBA_UART_FR & (1 << 5))
+			barrier();
+
+		AMBA_UART_DR = *s;
+
+		if (*s == '\n') {
+			while (AMBA_UART_FR & (1 << 5))
+				barrier();
+
+			AMBA_UART_DR = '\r';
+		}
+		s++;
+	}
+	while (AMBA_UART_FR & (1 << 3))
+		barrier();
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-realview/vmalloc.h b/include/asm-arm/arch-realview/vmalloc.h
new file mode 100644
index 00000000000..0ad49af186a
--- /dev/null
+++ b/include/asm-arm/arch-realview/vmalloc.h
@@ -0,0 +1,21 @@
+/*
+ *  linux/include/asm-arm/arch-realview/vmalloc.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *  Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#define VMALLOC_END		(PAGE_OFFSET + 0x18000000)
diff --git a/include/asm-arm/arch-s3c2410/regs-iis.h b/include/asm-arm/arch-s3c2410/regs-iis.h
index fdd62e8cd6c..7fdde9b91cb 100644
--- a/include/asm-arm/arch-s3c2410/regs-iis.h
+++ b/include/asm-arm/arch-s3c2410/regs-iis.h
@@ -55,6 +55,7 @@
 #define S3C2410_IISMOD_16FS	  (0<<0)
 #define S3C2410_IISMOD_32FS	  (1<<0)
 #define S3C2410_IISMOD_48FS	  (2<<0)
+#define S3C2410_IISMOD_FS_MASK	  (3<<0)
 
 #define S3C2410_IISPSR		(0x08)
 #define S3C2410_IISPSR_INTMASK	(31<<5)
diff --git a/include/asm-arm/hardware/amba_clcd.h b/include/asm-arm/hardware/amba_clcd.h
index ce4cf5c1c05..6b8d73dc1ab 100644
--- a/include/asm-arm/hardware/amba_clcd.h
+++ b/include/asm-arm/hardware/amba_clcd.h
@@ -22,7 +22,7 @@
 #define CLCD_UBAS 		0x00000010
 #define CLCD_LBAS 		0x00000014
 
-#ifndef CONFIG_ARCH_VERSATILE
+#if !defined(CONFIG_ARCH_VERSATILE) && !defined(CONFIG_ARCH_REALVIEW)
 #define CLCD_IENB 		0x00000018
 #define CLCD_CNTL 		0x0000001c
 #else