Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: relax ioremap prohibition (309caa9) for -final and -stable
  ARM: 6440/1: ep93xx: DMA: fix channel_disable
  cpuimx27: fix i2c bus selection
  cpuimx27: fix compile when ULPI is selected
  ARM: 6435/1: Fix HWCAP_TLS flag for ARM11MPCore/Cortex-A9
  ARM: 6436/1: AT91: Fix power-saving in idle-mode on 926T processors
  ARM: fix section mismatch warnings in Versatile Express
  ARM: 6412/1: kprobes-decode: add support for MOVW instruction
  ARM: 6419/1: mmu: Fix MT_MEMORY and MT_MEMORY_NONCACHED pte flags
  ARM: 6416/1: errata: faulty hazard checking in the Store Buffer may lead to data corruption

11 files changed, 44 insertions, 17 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 88c97bc7a6f..9c26ba7244f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1101,6 +1101,20 @@ config ARM_ERRATA_720789
 	  invalidated are not, resulting in an incoherency in the system page
 	  tables. The workaround changes the TLB flushing routines to invalidate
 	  entries regardless of the ASID.
+
+config ARM_ERRATA_743622
+	bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 743622 Cortex-A9
+	  (r2p0..r2p2) erratum. Under very rare conditions, a faulty
+	  optimisation in the Cortex-A9 Store Buffer may lead to data
+	  corruption. This workaround sets a specific bit in the diagnostic
+	  register of the Cortex-A9 which disables the Store Buffer
+	  optimisation, preventing the defect from occurring. This has no
+	  visible impact on the overall performance or power consumption of the
+	  processor.
+
 endmenu
 
 source "arch/arm/common/Kconfig"
diff --git a/arch/arm/kernel/kprobes-decode.c b/arch/arm/kernel/kprobes-decode.c
index 8bccbfa693f..2c1f0050c9c 100644
--- a/arch/arm/kernel/kprobes-decode.c
+++ b/arch/arm/kernel/kprobes-decode.c
@@ -1162,11 +1162,12 @@ space_cccc_001x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
 {
 	/*
 	 * MSR   : cccc 0011 0x10 xxxx xxxx xxxx xxxx xxxx
-	 * Undef : cccc 0011 0x00 xxxx xxxx xxxx xxxx xxxx
+	 * Undef : cccc 0011 0100 xxxx xxxx xxxx xxxx xxxx
 	 * ALU op with S bit and Rd == 15 :
 	 *	   cccc 001x xxx1 xxxx 1111 xxxx xxxx xxxx
 	 */
-	if ((insn & 0x0f900000) == 0x03200000 ||	/* MSR & Undef */
+	if ((insn & 0x0fb00000) == 0x03200000 ||	/* MSR */
+	    (insn & 0x0ff00000) == 0x03400000 ||	/* Undef */
 	    (insn & 0x0e10f000) == 0x0210f000)		/* ALU s-bit, R15  */
 		return INSN_REJECTED;
 
@@ -1177,7 +1178,7 @@ space_cccc_001x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
 	 * *S (bit 20) updates condition codes
 	 * ADC/SBC/RSC reads the C flag
 	 */
-	insn &= 0xfff00fff;	/* Rn = r0, Rd = r0 */
+	insn &= 0xffff0fff;	/* Rd = r0 */
 	asi->insn[0] = insn;
 	asi->insn_handler = (insn & (1 << 20)) ?  /* S-bit */
 			emulate_alu_imm_rwflags : emulate_alu_imm_rflags;
diff --git a/arch/arm/mach-at91/include/mach/system.h b/arch/arm/mach-at91/include/mach/system.h
index c80e090b367..ee8db152592 100644
--- a/arch/arm/mach-at91/include/mach/system.h
+++ b/arch/arm/mach-at91/include/mach/system.h
@@ -28,17 +28,16 @@
 
 static inline void arch_idle(void)
 {
-#ifndef CONFIG_DEBUG_KERNEL
 	/*
 	 * Disable the processor clock.  The processor will be automatically
 	 * re-enabled by an interrupt or by a reset.
 	 */
 	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
-#else
+#ifndef CONFIG_CPU_ARM920T
 	/*
 	 * Set the processor (CP15) into 'Wait for Interrupt' mode.
-	 * Unlike disabling the processor clock via the PMC (above)
-	 *  this allows the processor to be woken via JTAG.
+	 * Post-RM9200 processors need this in conjunction with the above
+	 * to save power when idle.
 	 */
 	cpu_do_idle();
 #endif
diff --git a/arch/arm/mach-ep93xx/dma-m2p.c b/arch/arm/mach-ep93xx/dma-m2p.c
index 8904ca4e2e2..a696d354b1f 100644
--- a/arch/arm/mach-ep93xx/dma-m2p.c
+++ b/arch/arm/mach-ep93xx/dma-m2p.c
@@ -276,7 +276,7 @@ static void channel_disable(struct m2p_channel *ch)
 	v &= ~(M2P_CONTROL_STALL_IRQ_EN | M2P_CONTROL_NFB_IRQ_EN);
 	m2p_set_control(ch, v);
 
-	while (m2p_channel_state(ch) == STATE_ON)
+	while (m2p_channel_state(ch) >= STATE_ON)
 		cpu_relax();
 
 	m2p_set_control(ch, 0x0);
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index c5c0369bb48..2f7e2728970 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -122,6 +122,7 @@ config MACH_CPUIMX27
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_MXC_NAND
+	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for Eukrea CPUIMX27 platform. This includes
 	  specific configurations for the module and its peripherals.
diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
index 339150ab0ea..6830afd1d2b 100644
--- a/arch/arm/mach-imx/mach-cpuimx27.c
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -259,7 +259,7 @@ static void __init eukrea_cpuimx27_init(void)
 	i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices,
 				ARRAY_SIZE(eukrea_cpuimx27_i2c_devices));
 
-	imx27_add_i2c_imx1(&cpuimx27_i2c1_data);
+	imx27_add_i2c_imx0(&cpuimx27_i2c1_data);
 
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c
index efb127022d4..71fb1734952 100644
--- a/arch/arm/mach-vexpress/ct-ca9x4.c
+++ b/arch/arm/mach-vexpress/ct-ca9x4.c
@@ -68,7 +68,7 @@ static void __init ct_ca9x4_init_irq(void)
 }
 
 #if 0
-static void ct_ca9x4_timer_init(void)
+static void __init ct_ca9x4_timer_init(void)
 {
 	writel(0, MMIO_P2V(CT_CA9X4_TIMER0) + TIMER_CTRL);
 	writel(0, MMIO_P2V(CT_CA9X4_TIMER1) + TIMER_CTRL);
@@ -222,7 +222,7 @@ static struct platform_device pmu_device = {
 	.resource	= pmu_resources,
 };
 
-static void ct_ca9x4_init(void)
+static void __init ct_ca9x4_init(void)
 {
 	int i;
 
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index 817f0ad38a0..7eaa232180a 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -48,7 +48,7 @@ void __init v2m_map_io(struct map_desc *tile, size_t num)
 }
 
 
-static void v2m_timer_init(void)
+static void __init v2m_timer_init(void)
 {
 	writel(0, MMIO_P2V(V2M_TIMER0) + TIMER_CTRL);
 	writel(0, MMIO_P2V(V2M_TIMER1) + TIMER_CTRL);
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index ab506272b2d..17e7b0b57e4 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -204,8 +204,12 @@ void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn,
 	/*
 	 * Don't allow RAM to be mapped - this causes problems with ARMv6+
 	 */
-	if (WARN_ON(pfn_valid(pfn)))
-		return NULL;
+	if (pfn_valid(pfn)) {
+		printk(KERN_WARNING "BUG: Your driver calls ioremap() on system memory.  This leads\n"
+		       KERN_WARNING "to architecturally unpredictable behaviour on ARMv6+, and ioremap()\n"
+		       KERN_WARNING "will fail in the next kernel release.  Please fix your driver.\n");
+		WARN_ON(1);
+	}
 
 	type = get_mem_type(mtype);
 	if (!type)
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 6a3a2d0cd6d..e8ed9dc461f 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -248,7 +248,7 @@ static struct mem_type mem_types[] = {
 	},
 	[MT_MEMORY] = {
 		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
-				L_PTE_USER | L_PTE_EXEC,
+				L_PTE_WRITE | L_PTE_EXEC,
 		.prot_l1   = PMD_TYPE_TABLE,
 		.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
 		.domain    = DOMAIN_KERNEL,
@@ -259,7 +259,7 @@ static struct mem_type mem_types[] = {
 	},
 	[MT_MEMORY_NONCACHED] = {
 		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
-				L_PTE_USER | L_PTE_EXEC | L_PTE_MT_BUFFERABLE,
+				L_PTE_WRITE | L_PTE_EXEC | L_PTE_MT_BUFFERABLE,
 		.prot_l1   = PMD_TYPE_TABLE,
 		.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
 		.domain    = DOMAIN_KERNEL,
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 7563ff0141b..197f21bed5e 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -253,6 +253,14 @@ __v7_setup:
 	orreq	r10, r10, #1 << 22		@ set bit #22
 	mcreq	p15, 0, r10, c15, c0, 1		@ write diagnostic register
 #endif
+#ifdef CONFIG_ARM_ERRATA_743622
+	teq	r6, #0x20			@ present in r2p0
+	teqne	r6, #0x21			@ present in r2p1
+	teqne	r6, #0x22			@ present in r2p2
+	mrceq	p15, 0, r10, c15, c0, 1		@ read diagnostic register
+	orreq	r10, r10, #1 << 6		@ set bit #6
+	mcreq	p15, 0, r10, c15, c0, 1		@ write diagnostic register
+#endif
 
 3:	mov	r10, #0
 #ifdef HARVARD_CACHE
@@ -365,7 +373,7 @@ __v7_ca9mp_proc_info:
 	b	__v7_ca9mp_setup
 	.long	cpu_arch_name
 	.long	cpu_elf_name
-	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS
 	.long	cpu_v7_name
 	.long	v7_processor_functions
 	.long	v7wbi_tlb_fns