diff options
| author | Andreas Henriksson <andreas.henriksson@endian.se> | 2014-09-23 17:12:52 +0200 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2014-10-30 09:40:18 -0700 |
| commit | e9720836a09c71ce770a69f40d1559a5425e24e4 (patch) | |
| tree | dabc733f27e097965097965c9e0ff79e35162468 | |
| parent | e85374c78e243f032a3b0b7bb2af5c776acdd949 (diff) | |
ARM: at91: fix at91sam9263ek DT mmc pinmuxing settings
commit b65e0fb3d046cc65d0a3c45d43de351fb363271b upstream.
As discovered on a custom board similar to at91sam9263ek and basing
its devicetree on that one apparently the pin muxing doesn't get
set up properly. This was discovered since the custom boards u-boot
does funky stuff with the pin muxing and leaved it set to SPI
which made the MMC driver not work under Linux.
The fix is simply to define the given configuration as the default.
This probably worked by pure luck before, but it's better to
make the muxing explicitly set.
Signed-off-by: Andreas Henriksson <andreas.henriksson@endian.se>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| -rw-r--r-- | arch/arm/boot/dts/at91sam9263.dtsi | 2 |
1 files changed, 2 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index fece8665fb6..b8f234bf7de 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -535,6 +535,7 @@ compatible = "atmel,hsmci"; reg = <0xfff80000 0x600>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -544,6 +545,7 @@ compatible = "atmel,hsmci"; reg = <0xfff84000 0x600>; interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; |