ARM: davinci: remove broken ntosd2_init_i2c

ntosd2_init_i2c walks the ntosd2_i2c_info array, which it expects to
be populated with at least one member. gcc correctly warns about
the out-of-bounds access here.

Since this can not possibly work, it's better to disable i2c
support entirely on this board.

Without this patch, building davinci_all_defconfig results in:

arch/arm/mach-davinci/board-neuros-osd2.c: In function 'davinci_ntosd2_init':
arch/arm/mach-davinci/board-neuros-osd2.c:187:20: warning: array subscript is above array bounds [-Warray-bounds]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Andrey Porodko <panda@chelcom.ru>

1 files changed, 0 insertions, 39 deletions

diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index 5de69f2fcca..f6b9fc70161 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -162,38 +162,6 @@ static void __init davinci_ntosd2_map_io(void)
 	dm644x_init();
 }
 
-/*
- I2C initialization
-*/
-static struct davinci_i2c_platform_data ntosd2_i2c_pdata = {
-	.bus_freq	= 20 /* kHz */,
-	.bus_delay	= 100 /* usec */,
-};
-
-static struct i2c_board_info __initdata ntosd2_i2c_info[] =  {
-};
-
-static	int ntosd2_init_i2c(void)
-{
-	int	status;
-
-	davinci_init_i2c(&ntosd2_i2c_pdata);
-	status = gpio_request(NTOSD2_MSP430_IRQ, ntosd2_i2c_info[0].type);
-	if (status == 0) {
-		status = gpio_direction_input(NTOSD2_MSP430_IRQ);
-		if (status == 0) {
-			status = gpio_to_irq(NTOSD2_MSP430_IRQ);
-			if (status > 0) {
-				ntosd2_i2c_info[0].irq = status;
-				i2c_register_board_info(1,
-					ntosd2_i2c_info,
-					ARRAY_SIZE(ntosd2_i2c_info));
-			}
-		}
-	}
-	return status;
-}
-
 static struct davinci_mmc_config davinci_ntosd2_mmc_config = {
 	.wires		= 4,
 	.version	= MMC_CTLR_VERSION_1
@@ -218,7 +186,6 @@ static __init void davinci_ntosd2_init(void)
 {
 	struct clk *aemif_clk;
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	int	status;
 
 	aemif_clk = clk_get(NULL, "aemif");
 	clk_enable(aemif_clk);
@@ -242,12 +209,6 @@ static __init void davinci_ntosd2_init(void)
 	platform_add_devices(davinci_ntosd2_devices,
 				ARRAY_SIZE(davinci_ntosd2_devices));
 
-	/* Initialize I2C interface specific for this board */
-	status = ntosd2_init_i2c();
-	if (status < 0)
-		pr_warning("davinci_ntosd2_init: msp430 irq setup failed:"
-						"	 %d\n", status);
-
 	davinci_serial_init(&uart_config);
 	dm644x_init_asp(&dm644x_ntosd2_snd_data);