linux/scripts/Makefile.lib, branch rpi-mipi

Merge remote-tracking branch 'stable/linux-6.12.y' into rpi-6.12.y

2025-05-06T13:14:05Z

objtool: Silence more KCOV warnings, part 2

2025-05-02T05:59:33Z

commit 55c78035a1a8dfb05f1472018ce2a651701adb7d upstream. Similar to GCOV, KCOV can leave behind dead code and undefined behavior. Warnings related to those should be ignored. The previous commit: 6b023c784204 ("objtool: Silence more KCOV warnings") ... only did so for CONFIG_CGOV_KERNEL. Also do it for CONFIG_KCOV, but for real this time. Fixes the following warning: vmlinux.o: warning: objtool: synaptics_report_mt_data: unexpected end of section .text.synaptics_report_mt_data Fixes: 6b023c784204 ("objtool: Silence more KCOV warnings") Reported-by: kernel test robot Signed-off-by: Josh Poimboeuf Signed-off-by: Ingo Molnar Cc: Linus Torvalds Link: https://lore.kernel.org/r/a44ba16e194bcbc52c1cef3d3cd9051a62622723.1743481539.git.jpoimboe@kernel.org Closes: https://lore.kernel.org/oe-kbuild-all/202503282236.UhfRsF3B-lkp@intel.com/ Signed-off-by: Greg Kroah-Hartman

BCM2708: Add core Device Tree support

2025-03-25T12:26:53Z

Add the bare minimum needed to boot BCM2708 from a Device Tree. Signed-off-by: Noralf Tronnes BCM2708: DT: change 'axi' nodename to 'soc' Change DT node named 'axi' to 'soc' so it matches ARCH_BCM2835. The VC4 bootloader fills in certain properties in the 'axi' subtree, but since this is part of an upstreaming effort, the name is changed. Signed-off-by: Noralf Tronnes notro@tronnes.org BCM2708_DT: Correct length of the peripheral space Use dts-dirs feature for overlays. The kernel makefiles have a dts-dirs target that is for vendor subdirectories. Using this fixes the install_dtbs target, which previously did not install the overlays. BCM270X_DT: configure I2S DMA channels Signed-off-by: Matthias Reichl BCM270X_DT: switch to bcm2835-i2s I2S soundcard drivers with proper devicetree support (i.e. not linking to the cpu_dai/platform via name but to cpu/platform via of_node) will work out of the box without any modifications. When the kernel is compiled without devicetree support the platform code will instantiate the bcm2708-i2s driver and I2S soundcard drivers will link to it via name, as before. Signed-off-by: Matthias Reichl SDIO-overlay: add poll_once-boolean parameter Add paramter to toggle sdio-device-polling done every second or once at boot-time. Signed-off-by: Patrick Boettcher BCM270X_DT: Make mmc overlay compatible with current firmware The original DT overlay logic followed a merge-then-patch procedure, i.e. parameters are applied to the loaded overlay before the overlay is merged into the base DTB. This sequence has been changed to patch-then-merge, in order to support parameterised node names, and to protect against bad overlays. As a result, overrides (parameters) must only target labels in the overlay, but the overlay can obviously target nodes in the base DTB. mmc-overlay.dts (that switches back to the original mmc sdcard driver) is the only overlay violating that rule, and this patch fixes it. bcm270x_dt: Use the sdhost MMC controller by default The "mmc" overlay reverts to using the other controller. squash: Add cprman to dt BCM270X_DT: Use clk_core for I2C interfaces BCM270X_DT: Use bcm283x.dtsi, bcm2835.dtsi and bcm2836.dtsi The mainline Device Tree files are quite close to downstream now. Let's use bcm283x.dtsi, bcm2835.dtsi and bcm2836.dtsi as base files for our dts files. Mainline dts files are based on these files: bcm2835-rpi.dtsi bcm2835.dtsi bcm2836.dtsi bcm283x.dtsi Current downstream are based on these: bcm2708.dtsi bcm2709.dtsi bcm2710.dtsi bcm2708_common.dtsi This patch introduces this dependency: bcm2708.dtsi bcm2709.dtsi bcm2708-rpi.dtsi bcm270x.dtsi bcm2835.dtsi bcm2836.dtsi bcm283x.dtsi And: bcm2710.dtsi bcm2708-rpi.dtsi bcm270x.dtsi bcm283x.dtsi bcm270x.dtsi contains the downstream bcm283x.dtsi diff. bcm2708-rpi.dtsi is the downstream version of bcm2835-rpi.dtsi. Other changes: - The led node has moved from /soc/leds to /leds. This is not a problem since the label is used to reference it. - The clk_osc reg property changes from 6 to 3. - The gpu nodes has their interrupt property set in the base file. - the clocks label does not point to the /clocks node anymore, but points to the cprman node. This is not a problem since the overlays that use the clock node refer to it directly: target-path = "/clocks"; - some nodes now have 2 labels since mainline and downstream differs in this respect: cprman/clocks, spi0/spi, gpu/vc4. - some nodes doesn't have an explicit status = "okay" since they're not disabled in the base file: watchdog and random. - gpiomem doesn't need an explicit status = "okay". - bcm2708-rpi-cm.dts got the hpd-gpios property from bcm2708_common.dtsi, it's now set directly in that file. - bcm2709-rpi-2-b.dts has the timer node moved from /soc/timer to /timer. - Removed clock-frequency property on the bcm{2709,2710}.dtsi timer nodes. Signed-off-by: Noralf Trønnes BCM270X_DT: Use raspberrypi-power to turn on USB power Use the raspberrypi-power driver to turn on USB power. Signed-off-by: Noralf Trønnes BCM270X_DT: Add a .dtbo target, use for overlays Change the filenames and extensions to keep the pre-DDT style of overlay (-overlay.dtb) distinct from new ones that use a different style of local fixups (.dtbo), and to match other platforms. The RPi firmware uses the DDTK trailer atom to choose which type of overlay to use for each kernel. Signed-off-by: Phil Elwell BCM270X_DT: Don't generate "linux,phandle" props The EPAPR standard says to use "phandle" properties to store phandles, rather than the deprecated "linux,phandle" version. By default, dtc generates both, but adding "-H epapr" causes it to only generate "phandle"s, saving some space and clutter. Signed-off-by: Phil Elwell BCM270X_DT: Add overlay for enc28j60 on SPI2 Works on SPI2 for compute module BCM270X_DT: Add midi-uart0 overlay MIDI requires 31.25kbaud, a baudrate unsupported by Linux. The midi-uart0 overlay configures uart0 (ttyAMA0) to use a fake clock so that requesting 38.4kbaud actually gets 31.25kbaud. Signed-off-by: Phil Elwell BCM270X_DT: Add i2c-sensor overlay The i2c-sensor overlay is a container for various pressure and temperature sensors, currently bmp085 and bmp280. The standalone bmp085_i2c-sensor overlay is now deprecated. Signed-off-by: Phil Elwell BCM270X_DT: overlays/*-overlay.dtb -> overlays/*.dtbo (#1752) We now create overlays as .dtbo files. build: support for .dtbo files for dtb overlays Kernel 4.4.6+ on RaspberryPi support .dtbo files for overlays, instead of .dtb. Patch the kernel, which has faulty rules to generate .dtbo the way yocto does Signed-off-by: Herve Jourdain Signed-off-by: Khem Raj BCM270X: Drop position requirement for CMA in VC4 overlay. No longer necessary since 2aefcd576195a739a7a256099571c9c4a401005f, and will probably let peeople that want to choose a larger CMA allocation (particularly on pi0/1). Signed-off-by: Eric Anholt BCM270X_DT: RPi Device Tree tidy Use the upstream sdhost node, add thermal-zones, and factor out some common elements. Signed-off-by: Phil Elwell kbuild: Silence unhelpful DTC warnings Signed-off-by: Phil Elwell BCM270X_DT: DT build rules no longer arch-specific Signed-off-by: Phil Elwell kbuild: Silence unavoidable dtc overlay warnings Much effort has been put into finding ways to avoid warnings from dtc about overlays, usually to do with the presence of #address-cells and size-cells, but not exclusively so. Since the issues being warned about are harmless, suppress the warnings to declutter the build output and to avoid alarming users. Signed-off-by: Phil Elwell overlays: Suppress another dtc warning I'm sure the dtc warnings mean well, but overlays don't have enough context for the checkers to give meaningful results. Signed-off-by: Phil Elwell overlays: Use dtbs-list for overlay installation Update the overlay build rules to use the dtbs-list mechanism. Also include the README, and don't set the executable bits. Signed-off-by: Phil Elwell

kbuild: switch from lz4c to lz4 for compression

2025-02-08T08:58:12Z

commit e397a603e49cc7c7c113fad9f55a09637f290c34 upstream. Replace lz4c with lz4 for kernel image compression. Although lz4 and lz4c are functionally similar, lz4c has been deprecated upstream since 2018. Since as early as Ubuntu 16.04 and Fedora 25, lz4 and lz4c have been packaged together, making it safe to update the requirement from lz4c to lz4. Consequently, some distributions and build systems, such as OpenEmbedded, have fully transitioned to using lz4. OpenEmbedded core adopted this change in commit fe167e082cbd ("bitbake.conf: require lz4 instead of lz4c"), causing compatibility issues when building the mainline kernel in the latest OpenEmbedded environment, as seen in the errors below. This change also updates the LZ4 compression commands to make it backward compatible by replacing stdin and stdout with the '-' option, due to some unclear reason, the stdout keyword does not work for lz4 and '-' works for both. In addition, this modifies the legacy '-c1' with '-9' which is also compatible with both. This fixes the mainline kernel build failures with the latest master OpenEmbedded builds associated with the mentioned compatibility issues. LZ4 arch/arm/boot/compressed/piggy_data /bin/sh: 1: lz4c: not found ... ... ERROR: oe_runmake failed Link: https://github.com/lz4/lz4/pull/553 Suggested-by: Francesco Dolcini Signed-off-by: Parth Pancholi Signed-off-by: Masahiro Yamada Cc: Salvatore Bonaccorso Signed-off-by: Greg Kroah-Hartman

Merge tag 'rust-6.12' of https://github.com/Rust-for-Linux/linux

2024-09-25T17:25:40Z

Pull Rust updates from Miguel Ojeda: "Toolchain and infrastructure: - Support 'MITIGATION_{RETHUNK,RETPOLINE,SLS}' (which cleans up objtool warnings), teach objtool about 'noreturn' Rust symbols and mimic '___ADDRESSABLE()' for 'module_{init,exit}'. With that, we should be objtool-warning-free, so enable it to run for all Rust object files. - KASAN (no 'SW_TAGS'), KCFI and shadow call sanitizer support. - Support 'RUSTC_VERSION', including re-config and re-build on change. - Split helpers file into several files in a folder, to avoid conflicts in it. Eventually those files will be moved to the right places with the new build system. In addition, remove the need to manually export the symbols defined there, reusing existing machinery for that. - Relax restriction on configurations with Rust + GCC plugins to just the RANDSTRUCT plugin. 'kernel' crate: - New 'list' module: doubly-linked linked list for use with reference counted values, which is heavily used by the upcoming Rust Binder. This includes 'ListArc' (a wrapper around 'Arc' that is guaranteed unique for the given ID), 'AtomicTracker' (tracks whether a 'ListArc' exists using an atomic), 'ListLinks' (the prev/next pointers for an item in a linked list), 'List' (the linked list itself), 'Iter' (an iterator over a 'List'), 'Cursor' (a cursor into a 'List' that allows to remove elements), 'ListArcField' (a field exclusively owned by a 'ListArc'), as well as support for heterogeneous lists. - New 'rbtree' module: red-black tree abstractions used by the upcoming Rust Binder. This includes 'RBTree' (the red-black tree itself), 'RBTreeNode' (a node), 'RBTreeNodeReservation' (a memory reservation for a node), 'Iter' and 'IterMut' (immutable and mutable iterators), 'Cursor' (bidirectional cursor that allows to remove elements), as well as an entry API similar to the Rust standard library one. - 'init' module: add 'write_[pin_]init' methods and the 'InPlaceWrite' trait. Add the 'assert_pinned!' macro. - 'sync' module: implement the 'InPlaceInit' trait for 'Arc' by introducing an associated type in the trait. - 'alloc' module: add 'drop_contents' method to 'BoxExt'. - 'types' module: implement the 'ForeignOwnable' trait for 'Pin>' and improve the trait's documentation. In addition, add the 'into_raw' method to the 'ARef' type. - 'error' module: in preparation for the upcoming Rust support for 32-bit architectures, like arm, locally allow Clippy lint for those. Documentation: - https://rust.docs.kernel.org has been announced, so link to it. - Enable rustdoc's "jump to definition" feature, making its output a bit closer to the experience in a cross-referencer. - Debian Testing now also provides recent Rust releases (outside of the freeze period), so add it to the list. MAINTAINERS: - Trevor is joining as reviewer of the "RUST" entry. And a few other small bits" * tag 'rust-6.12' of https://github.com/Rust-for-Linux/linux: (54 commits) kasan: rust: Add KASAN smoke test via UAF kbuild: rust: Enable KASAN support rust: kasan: Rust does not support KHWASAN kbuild: rust: Define probing macros for rustc kasan: simplify and clarify Makefile rust: cfi: add support for CFI_CLANG with Rust cfi: add CONFIG_CFI_ICALL_NORMALIZE_INTEGERS rust: support for shadow call stack sanitizer docs: rust: include other expressions in conditional compilation section kbuild: rust: replace proc macros dependency on `core.o` with the version text kbuild: rust: rebuild if the version text changes kbuild: rust: re-run Kconfig if the version text changes kbuild: rust: add `CONFIG_RUSTC_VERSION` rust: avoid `box_uninit_write` feature MAINTAINERS: add Trevor Gross as Rust reviewer rust: rbtree: add `RBTree::entry` rust: rbtree: add cursor rust: rbtree: add mutable iterator rust: rbtree: add iterator rust: rbtree: add red-black tree implementation backed by the C version ...

Merge tag 'kbuild-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

2024-09-24T20:02:06Z

Pull Kbuild updates from Masahiro Yamada: - Support cross-compiling linux-headers Debian package and kernel-devel RPM package - Add support for the linux-debug Pacman package - Improve module rebuilding speed by factoring out the common code to scripts/module-common.c - Separate device tree build rules into scripts/Makefile.dtbs - Add a new script to generate modules.builtin.ranges, which is useful for tracing tools to find symbols in built-in modules - Refactor Kconfig and misc tools - Update Kbuild and Kconfig documentation * tag 'kbuild-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (51 commits) kbuild: doc: replace "gcc" in external module description kbuild: doc: describe the -C option precisely for external module builds kbuild: doc: remove the description about shipped files kbuild: doc: drop section numbering, use references in modules.rst kbuild: doc: throw out the local table of contents in modules.rst kbuild: doc: remove outdated description of the limitation on -I usage kbuild: doc: remove description about grepping CONFIG options kbuild: doc: update the description about Kbuild/Makefile split kbuild: remove unnecessary export of RUST_LIB_SRC kbuild: remove append operation on cmd_ld_ko_o kconfig: cache expression values kconfig: use hash table to reuse expressions kconfig: refactor expr_eliminate_dups() kconfig: add comments to expression transformations kconfig: change some expr_*() functions to bool scripts: move hash function from scripts/kconfig/ to scripts/include/ kallsyms: change overflow variable to bool type kallsyms: squash output_address() kbuild: add install target for modules.builtin.ranges scripts: add verifier script for builtin module range data ...

kbuild: rust: Enable KASAN support

2024-09-16T16:04:37Z

Rust supports KASAN via LLVM, but prior to this patch, the flags aren't set properly. Suggested-by: Miguel Ojeda Signed-off-by: Matthew Maurer Reviewed-by: Andrey Konovalov Link: https://lore.kernel.org/r/20240820194910.187826-4-mmaurer@google.com [ Applied "SW_TAGS KASAN" nit. - Miguel ] Signed-off-by: Miguel Ojeda

kbuild: add mod(name,file)_flags to assembler flags for module objects

2024-09-10T09:36:10Z

In order to create the file at build time, modules.builtin.ranges, that contains the range of addresses for all built-in modules, there needs to be a way to identify what code is compiled into modules. To identify what code is compiled into modules during a kernel build, one can look for the presence of the -DKBUILD_MODFILE and -DKBUILD_MODNAME options in the compile command lines. A simple grep in .*.cmd files for those options is sufficient for this. Unfortunately, these options are only passed when compiling C source files. Various modules also include objects built from assembler source, and these options are not passed in that case. Adding $(modfile_flags) to modkern_aflags (similar to modkern_cflags), and adding $(modname_flags) to a_flags (similar to c_flags) makes it possible to identify which objects are compiled into modules for both C and assembler source files. While KBUILD_MODFILE is sufficient to generate the modules ranges data, KBUILD_MODNAME is passed as well for consistency with the C source code case. Signed-off-by: Kris Van Hees Reviewed-by: Steven Rostedt (Google) Tested-by: Sam James Reviewed-by: Sami Tolvanen Tested-by: Sami Tolvanen Signed-off-by: Masahiro Yamada

kbuild: split device tree build rules into scripts/Makefile.dtbs

2024-09-09T14:42:13Z

scripts/Makefile.lib is included not only from scripts/Makefile.build but also from scripts/Makefile.{modfinal,package,vmlinux,vmlinux_o}, where DT build rules are not required. Split the DT build rules out to scripts/Makefile.dtbs, and include it only when necessary. While I was here, I added $(DT_TMP_SCHEMA) as a prerequisite of $(multi-dtb-y). Signed-off-by: Masahiro Yamada Reviewed-by: Rob Herring (Arm)

xz: fix comments and coding style

2024-09-02T03:43:24Z

- Fix comments that were no longer in sync with the code below them. - Fix language errors. - Fix coding style. Link: https://lkml.kernel.org/r/20240721133633.47721-5-lasse.collin@tukaani.org Signed-off-by: Lasse Collin Reviewed-by: Sam James Cc: Albert Ou Cc: Catalin Marinas Cc: Emil Renner Berthing Cc: Greg Kroah-Hartman Cc: Herbert Xu Cc: Joel Stanley Cc: Jonathan Corbet Cc: Jubin Zhong Cc: Jules Maselbas Cc: Krzysztof Kozlowski Cc: Michael Ellerman Cc: Palmer Dabbelt Cc: Paul Walmsley Cc: Randy Dunlap Cc: Rui Li Cc: Simon Glass Cc: Thomas Gleixner Cc: Will Deacon Signed-off-by: Andrew Morton