linux/net, branch v3.12.18

rds: prevent dereference of a NULL device in rds_iw_laddr_check

2014-04-18T09:07:19Z

[ Upstream commit bf39b4247b8799935ea91d90db250ab608a58e50 ] Binding might result in a NULL device which is later dereferenced without checking. Signed-off-by: Sasha Levin Signed-off-by: David S. Miller Signed-off-by: Jiri Slaby

ipv6: some ipv6 statistic counters failed to disable bh

2014-04-18T09:07:16Z

[ Upstream commit 43a43b6040165f7b40b5b489fe61a4cb7f8c4980 ] After commit c15b1ccadb323ea ("ipv6: move DAD and addrconf_verify processing to workqueue") some counters are now updated in process context and thus need to disable bh before doing so, otherwise deadlocks can happen on 32-bit archs. Fabio Estevam noticed this while while mounting a NFS volume on an ARM board. As a compensation for missing this I looked after the other *_STATS_BH and found three other calls which need updating: 1) icmp6_send: ip6_fragment -> icmpv6_send -> icmp6_send (error handling) 2) ip6_push_pending_frames: rawv6_sendmsg -> rawv6_push_pending_frames -> ... (only in case of icmp protocol with raw sockets in error handling) 3) ping6_v6_sendmsg (error handling) Fixes: c15b1ccadb323ea ("ipv6: move DAD and addrconf_verify processing to workqueue") Reported-by: Fabio Estevam Tested-by: Fabio Estevam Cc: Eric Dumazet Signed-off-by: Hannes Frederic Sowa Signed-off-by: David S. Miller Signed-off-by: Jiri Slaby

vlan: Set hard_header_len according to available acceleration

2014-04-18T09:07:13Z

[ Upstream commit fc0d48b8fb449ca007b2057328abf736cb516168 ] Currently, if the card supports CTAG acceleration we do not account for the vlan header even if we are configuring an 8021AD vlan. This may not be best since we'll do software tagging for 8021AD which will cause data copy on skb head expansion Configure the length based on available hw offload capabilities and vlan protocol. CC: Patrick McHardy Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller Signed-off-by: Jiri Slaby

ip_tunnel: Fix dst ref-count.

2014-04-18T09:07:11Z

[ Upstream commit fbd02dd405d0724a0f25897ed4a6813297c9b96f ] Commit 10ddceb22ba (ip_tunnel:multicast process cause panic due to skb->_skb_refdst NULL pointer) removed dst-drop call from ip-tunnel-recv. Following commit reintroduce dst-drop and fix the original bug by checking loopback packet before releasing dst. Original bug: https://bugzilla.kernel.org/show_bug.cgi?id=70681 CC: Xin Long Signed-off-by: Pravin B Shelar Signed-off-by: David S. Miller Signed-off-by: Jiri Slaby

tipc: fix spinlock recursion bug for failed subscriptions

2014-04-18T09:07:11Z

[ Upstream commit a5d0e7c037119484a7006b883618bfa87996cb41 ] If a topology event subscription fails for any reason, such as out of memory, max number reached or because we received an invalid request the correct behavior is to terminate the subscribers connection to the topology server. This is currently broken and produces the following oops: [27.953662] tipc: Subscription rejected, illegal request [27.955329] BUG: spinlock recursion on CPU#1, kworker/u4:0/6 [27.957066] lock: 0xffff88003c67f408, .magic: dead4ead, .owner: kworker/u4:0/6, .owner_cpu: 1 [27.958054] CPU: 1 PID: 6 Comm: kworker/u4:0 Not tainted 3.14.0-rc6+ #5 [27.960230] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [27.960874] Workqueue: tipc_rcv tipc_recv_work [tipc] [27.961430] ffff88003c67f408 ffff88003de27c18 ffffffff815c0207 ffff88003de1c050 [27.962292] ffff88003de27c38 ffffffff815beec5 ffff88003c67f408 ffffffff817f0a8a [27.963152] ffff88003de27c58 ffffffff815beeeb ffff88003c67f408 ffffffffa0013520 [27.964023] Call Trace: [27.964292] [] dump_stack+0x45/0x56 [27.964874] [] spin_dump+0x8c/0x91 [27.965420] [] spin_bug+0x21/0x26 [27.965995] [] do_raw_spin_lock+0x116/0x140 [27.966631] [] _raw_spin_lock_bh+0x15/0x20 [27.967256] [] subscr_conn_shutdown_event+0x20/0xa0 [tipc] [27.968051] [] tipc_close_conn+0xa4/0xb0 [tipc] [27.968722] [] tipc_conn_terminate+0x1a/0x30 [tipc] [27.969436] [] subscr_conn_msg_event+0x1f2/0x2f0 [tipc] [27.970209] [] tipc_receive_from_sock+0x90/0xf0 [tipc] [27.970972] [] tipc_recv_work+0x29/0x50 [tipc] [27.971633] [] process_one_work+0x165/0x3e0 [27.972267] [] worker_thread+0x119/0x3a0 [27.972896] [] ? manage_workers.isra.25+0x2a0/0x2a0 [27.973622] [] kthread+0xdf/0x100 [27.974168] [] ? kthread_create_on_node+0x1a0/0x1a0 [27.974893] [] ret_from_fork+0x7c/0xb0 [27.975466] [] ? kthread_create_on_node+0x1a0/0x1a0 The recursion occurs when subscr_terminate tries to grab the subscriber lock, which is already taken by subscr_conn_msg_event. We fix this by checking if the request to establish a new subscription was successful, and if not we initiate termination of the subscriber after we have released the subscriber lock. Signed-off-by: Erik Hugne Reviewed-by: Jon Maloy Signed-off-by: David S. Miller Signed-off-by: Jiri Slaby

netpoll: fix the skb check in pkt_is_ns

2014-04-18T09:07:10Z

[ Not applicable upstream commit, the code here has been removed upstream. ] Neighbor Solicitation is ipv6 protocol, so we should check skb->protocol with ETH_P_IPV6 Signed-off-by: Li RongQing Cc: WANG Cong Signed-off-by: Jiri Slaby

ip6mr: fix mfc notification flags

2014-04-18T09:07:09Z

[ Upstream commit f518338b16038beeb73e155e60d0f70beb9379f4 ] Commit 812e44dd1829 ("ip6mr: advertise new mfc entries via rtnl") reuses the function ip6mr_fill_mroute() to notify mfc events. But this function was used only for dump and thus was always setting the flag NLM_F_MULTI, which is wrong in case of a single notification. Libraries like libnl will wait forever for NLMSG_DONE. CC: Thomas Graf Signed-off-by: Nicolas Dichtel Acked-by: Thomas Graf Signed-off-by: David S. Miller Signed-off-by: Jiri Slaby

ipmr: fix mfc notification flags

2014-04-18T09:07:08Z

[ Upstream commit 65886f439ab0fdc2dff20d1fa87afb98c6717472 ] Commit 8cd3ac9f9b7b ("ipmr: advertise new mfc entries via rtnl") reuses the function ipmr_fill_mroute() to notify mfc events. But this function was used only for dump and thus was always setting the flag NLM_F_MULTI, which is wrong in case of a single notification. Libraries like libnl will wait forever for NLMSG_DONE. CC: Thomas Graf Signed-off-by: Nicolas Dichtel Acked-by: Thomas Graf Signed-off-by: David S. Miller Signed-off-by: Jiri Slaby

rtnetlink: fix fdb notification flags

2014-04-18T09:07:08Z

[ Upstream commit 1c104a6bebf3c16b6248408b84f91d09ac8a26b6 ] Commit 3ff661c38c84 ("net: rtnetlink notify events for FDB NTF_SELF adds and deletes") reuses the function nlmsg_populate_fdb_fill() to notify fdb events. But this function was used only for dump and thus was always setting the flag NLM_F_MULTI, which is wrong in case of a single notification. Libraries like libnl will wait forever for NLMSG_DONE. CC: Thomas Graf Signed-off-by: Nicolas Dichtel Acked-by: Thomas Graf Signed-off-by: David S. Miller Signed-off-by: Jiri Slaby

ipv6: ip6_append_data_mtu do not handle the mtu of the second fragment properly

2014-04-18T09:07:06Z

[ Upstream commit e367c2d03dba4c9bcafad24688fadb79dd95b218 ] In ip6_append_data_mtu(), when the xfrm mode is not tunnel(such as transport),the ipsec header need to be added in the first fragment, so the mtu will decrease to reserve space for it, then the second fragment come, the mtu should be turn back, as the commit 0c1833797a5a6ec23ea9261d979aa18078720b74 said. however, in the commit a493e60ac4bbe2e977e7129d6d8cbb0dd236be, it use *mtu = min(*mtu, ...) to change the mtu, which lead to the new mtu is alway equal with the first fragment's. and cannot turn back. when I test through ping6 -c1 -s5000 $ip (mtu=1280): ...frag (0|1232) ESP(spi=0x00002000,seq=0xb), length 1232 ...frag (1232|1216) ...frag (2448|1216) ...frag (3664|1216) ...frag (4880|164) which should be: ...frag (0|1232) ESP(spi=0x00001000,seq=0x1), length 1232 ...frag (1232|1232) ...frag (2464|1232) ...frag (3696|1232) ...frag (4928|116) so delete the min() when change back the mtu. Signed-off-by: Xin Long Fixes: 75a493e60ac4bb ("ipv6: ip6_append_data_mtu did not care about pmtudisc and frag_size") Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller Signed-off-by: Jiri Slaby