linux/net, branch v3.10.28

netfilter: nf_nat: fix access to uninitialized buffer in IRC NAT helper

2014-01-15T23:28:53Z

commit 2690d97ade05c5325cbf7c72b94b90d265659886 upstream. Commit 5901b6be885e attempted to introduce IPv6 support into IRC NAT helper. By doing so, the following code seemed to be removed by accident: ip = ntohl(exp->master->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u3.ip); sprintf(buffer, "%u %u", ip, port); pr_debug("nf_nat_irc: inserting '%s' == %pI4, port %u\n", buffer, &ip, port); This leads to the fact that buffer[] was left uninitialized and contained some stack value. When we call nf_nat_mangle_tcp_packet(), we call strlen(buffer) on excatly this uninitialized buffer. If we are unlucky and the skb has enough tailroom, we overwrite resp. leak contents with values that sit on our stack into the packet and send that out to the receiver. Since the rather informal DCC spec [1] does not seem to specify IPv6 support right now, we log such occurences so that admins can act accordingly, and drop the packet. I've looked into XChat source, and IPv6 is not supported there: addresses are in u32 and print via %u format string. Therefore, restore old behaviour as in IPv4, use snprintf(). The IRC helper does not support IPv6 by now. By this, we can safely use strlen(buffer) in nf_nat_mangle_tcp_packet() and prevent a buffer overflow. Also simplify some code as we now have ct variable anyway. [1] http://www.irchelp.org/irchelp/rfc/ctcpspec.html Fixes: 5901b6be885e ("netfilter: nf_nat: support IPv6 in IRC NAT helper") Signed-off-by: Daniel Borkmann Cc: Harald Welte Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman

mac80211: move "bufferable MMPDU" check to fix AP mode scan

2014-01-15T23:28:53Z

commit 277d916fc2e959c3f106904116bb4f7b1148d47a upstream. The check needs to apply to both multicast and unicast packets, otherwise probe requests on AP mode scans are sent through the multicast buffer queue, which adds long delays (often longer than the scanning interval). Signed-off-by: Felix Fietkau Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman

net: Loosen constraints for recalculating checksum in skb_segment()

2014-01-15T23:28:50Z

[ Upstream commit 1cdbcb7957cf9e5f841dbcde9b38fd18a804208b ] This is a generic solution to resolve a specific problem that I have observed. If the encapsulation of an skb changes then ability to offload checksums may also change. In particular it may be necessary to perform checksumming in software. An example of such a case is where a non-GRE packet is received but is to be encapsulated and transmitted as GRE. Another example relates to my proposed support for for packets that are non-MPLS when received but MPLS when transmitted. The cost of this change is that the value of the csum variable may be checked when it previously was not. In the case where the csum variable is true this is pure overhead. In the case where the csum variable is false it leads to software checksumming, which I believe also leads to correct checksums in transmitted packets for the cases described above. Further analysis: This patch relies on the return value of can_checksum_protocol() being correct and in turn the return value of skb_network_protocol(), used to provide the protocol parameter of can_checksum_protocol(), being correct. It also relies on the features passed to skb_segment() and in turn to can_checksum_protocol() being correct. I believe that this problem has not been observed for VLANs because it appears that almost all drivers, the exception being xgbe, set vlan_features such that that the checksum offload support for VLAN packets is greater than or equal to that of non-VLAN packets. I wonder if the code in xgbe may be an oversight and the hardware does support checksumming of VLAN packets. If so it may be worth updating the vlan_features of the driver as this patch will force such checksums to be performed in software rather than hardware. Signed-off-by: Simon Horman Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

bridge: use spin_lock_bh() in br_multicast_set_hash_max

2014-01-15T23:28:50Z

[ Upstream commit fe0d692bbc645786bce1a98439e548ae619269f5 ] br_multicast_set_hash_max() is called from process context in net/bridge/br_sysfs_br.c by the sysfs store_hash_max() function. br_multicast_set_hash_max() calls spin_lock(&br->multicast_lock), which can deadlock the CPU if a softirq that also tries to take the same lock interrupts br_multicast_set_hash_max() while the lock is held . This can happen quite easily when any of the bridge multicast timers expire, which try to take the same lock. The fix here is to use spin_lock_bh(), preventing other softirqs from executing on this CPU. Steps to reproduce: 1. Create a bridge with several interfaces (I used 4). 2. Set the "multicast query interval" to a low number, like 2. 3. Enable the bridge as a multicast querier. 4. Repeatedly set the bridge hash_max parameter via sysfs. # brctl addbr br0 # brctl addif br0 eth1 eth2 eth3 eth4 # brctl setmcqi br0 2 # brctl setmcquerier br0 1 # while true ; do echo 4096 > /sys/class/net/br0/bridge/hash_max; done Signed-off-by: Curt Brune Signed-off-by: Scott Feldman Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

netpoll: Fix missing TXQ unlock and and OOPS.

2014-01-15T23:28:50Z

[ Upstream commit aca5f58f9ba803ec8c2e6bcf890db17589e8dfcc ] The VLAN tag handling code in netpoll_send_skb_on_dev() has two problems. 1) It exits without unlocking the TXQ. 2) It then tries to queue a NULL skb to npinfo->txq. Reported-by: Ahmed Tamrawi Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: llc: fix use after free in llc_ui_recvmsg

2014-01-15T23:28:50Z

[ Upstream commit 4d231b76eef6c4a6bd9c96769e191517765942cb ] While commit 30a584d944fb fixes datagram interface in LLC, a use after free bug has been introduced for SOCK_STREAM sockets that do not make use of MSG_PEEK. The flow is as follow ... if (!(flags & MSG_PEEK)) { ... sk_eat_skb(sk, skb, false); ... } ... if (used + offset < skb->len) continue; ... where sk_eat_skb() calls __kfree_skb(). Therefore, cache original length and work on skb_len to check partial reads. Fixes: 30a584d944fb ("[LLX]: SOCK_DGRAM interface fixes") Signed-off-by: Daniel Borkmann Cc: Stephen Hemminger Cc: Arnaldo Carvalho de Melo Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

vlan: Fix header ops passthru when doing TX VLAN offload.

2014-01-15T23:28:49Z

[ Upstream commit 2205369a314e12fcec4781cc73ac9c08fc2b47de ] When the vlan code detects that the real device can do TX VLAN offloads in hardware, it tries to arrange for the real device's header_ops to be invoked directly. But it does so illegally, by simply hooking the real device's header_ops up to the VLAN device. This doesn't work because we will end up invoking a set of header_ops routines which expect a device type which matches the real device, but will see a VLAN device instead. Fix this by providing a pass-thru set of header_ops which will arrange to pass the proper real device instead. To facilitate this add a dev_rebuild_header(). There are implementations which provide a ->cache and ->create but not a ->rebuild (f.e. PLIP). So we need a helper function just like dev_hard_header() to avoid crashes. Use this helper in the one existing place where the header_ops->rebuild was being invoked, the neighbour code. With lots of help from Florian Westphal. Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: rose: restore old recvmsg behavior

2014-01-15T23:28:49Z

[ Upstream commit f81152e35001e91997ec74a7b4e040e6ab0acccf ] recvmsg handler in net/rose/af_rose.c performs size-check ->msg_namelen. After commit f3d3342602f8bcbf37d7c46641cb9bca7618eb1c (net: rework recvmsg handler msg_name and msg_namelen logic), we now always take the else branch due to namelen being initialized to 0. Digging in netdev-vger-cvs git repo shows that msg_namelen was initialized with a fixed-size since at least 1995, so the else branch was never taken. Compile tested only. Signed-off-by: Florian Westphal Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

rds: prevent dereference of a NULL device

2014-01-15T23:28:49Z

[ Upstream commit c2349758acf1874e4c2b93fe41d072336f1a31d0 ] Binding might result in a NULL device, which is dereferenced causing this BUG: [ 1317.260548] BUG: unable to handle kernel NULL pointer dereference at 000000000000097 4 [ 1317.261847] IP: [] rds_ib_laddr_check+0x82/0x110 [ 1317.263315] PGD 418bcb067 PUD 3ceb21067 PMD 0 [ 1317.263502] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC [ 1317.264179] Dumping ftrace buffer: [ 1317.264774] (ftrace buffer empty) [ 1317.265220] Modules linked in: [ 1317.265824] CPU: 4 PID: 836 Comm: trinity-child46 Tainted: G W 3.13.0-rc4- next-20131218-sasha-00013-g2cebb9b-dirty #4159 [ 1317.267415] task: ffff8803ddf33000 ti: ffff8803cd31a000 task.ti: ffff8803cd31a000 [ 1317.268399] RIP: 0010:[] [] rds_ib_laddr_check+ 0x82/0x110 [ 1317.269670] RSP: 0000:ffff8803cd31bdf8 EFLAGS: 00010246 [ 1317.270230] RAX: 0000000000000000 RBX: ffff88020b0dd388 RCX: 0000000000000000 [ 1317.270230] RDX: ffffffff8439822e RSI: 00000000000c000a RDI: 0000000000000286 [ 1317.270230] RBP: ffff8803cd31be38 R08: 0000000000000000 R09: 0000000000000000 [ 1317.270230] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 [ 1317.270230] R13: 0000000054086700 R14: 0000000000a25de0 R15: 0000000000000031 [ 1317.270230] FS: 00007ff40251d700(0000) GS:ffff88022e200000(0000) knlGS:000000000000 0000 [ 1317.270230] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 1317.270230] CR2: 0000000000000974 CR3: 00000003cd478000 CR4: 00000000000006e0 [ 1317.270230] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1317.270230] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000090602 [ 1317.270230] Stack: [ 1317.270230] 0000000054086700 5408670000a25de0 5408670000000002 0000000000000000 [ 1317.270230] ffffffff84223542 00000000ea54c767 0000000000000000 ffffffff86d26160 [ 1317.270230] ffff8803cd31be68 ffffffff84223556 ffff8803cd31beb8 ffff8800c6765280 [ 1317.270230] Call Trace: [ 1317.270230] [] ? rds_trans_get_preferred+0x42/0xa0 [ 1317.270230] [] rds_trans_get_preferred+0x56/0xa0 [ 1317.270230] [] rds_bind+0x73/0xf0 [ 1317.270230] [] SYSC_bind+0x92/0xf0 [ 1317.270230] [] ? context_tracking_user_exit+0xb8/0x1d0 [ 1317.270230] [] ? trace_hardirqs_on+0xd/0x10 [ 1317.270230] [] ? syscall_trace_enter+0x32/0x290 [ 1317.270230] [] SyS_bind+0xe/0x10 [ 1317.270230] [] tracesys+0xdd/0xe2 [ 1317.270230] Code: 00 8b 45 cc 48 8d 75 d0 48 c7 45 d8 00 00 00 00 66 c7 45 d0 02 00 89 45 d4 48 89 df e8 78 49 76 ff 41 89 c4 85 c0 75 0c 48 8b 03 <80> b8 74 09 00 00 01 7 4 06 41 bc 9d ff ff ff f6 05 2a b6 c2 02 [ 1317.270230] RIP [] rds_ib_laddr_check+0x82/0x110 [ 1317.270230] RSP [ 1317.270230] CR2: 0000000000000974 Signed-off-by: Sasha Levin Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

ipv6: always set the new created dst's from in ip6_rt_copy

2014-01-15T23:28:48Z

[ Upstream commit 24f5b855e17df7e355eacd6c4a12cc4d6a6c9ff0 ] ip6_rt_copy only sets dst.from if ort has flag RTF_ADDRCONF and RTF_DEFAULT. but the prefix routes which did get installed by hand locally can have an expiration, and no any flag combination which can ensure a potential from does never expire, so we should always set the new created dst's from. This also fixes the new created dst is always expired since the ort, which is created by RA, maybe has RTF_EXPIRES and RTF_ADDRCONF, but no RTF_DEFAULT. Suggested-by: Hannes Frederic Sowa CC: Gao feng Signed-off-by: Li RongQing Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman