linux/mm/vmstat.c, branch v3.10.2

mm/vmstat: add note on safety of drain_zonestat

2013-04-29T22:54:38Z

Signed-off-by: Cody P Schafer Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

mm: remove CONFIG_HOTPLUG ifdefs

2013-04-29T22:54:37Z

CONFIG_HOTPLUG is going away as an option, cleanup CONFIG_HOTPLUG ifdefs in mm files. Signed-off-by: Yijing Wang Acked-by: Greg Kroah-Hartman Acked-by: Rik van Riel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

mm: add & use zone_end_pfn() and zone_spans_pfn()

2013-02-24T01:50:20Z

Add 2 helpers (zone_end_pfn() and zone_spans_pfn()) to reduce code duplication. This also switches to using them in compaction (where an additional variable needed to be renamed), page_alloc, vmstat, memory_hotplug, and kmemleak. Note that in compaction.c I avoid calling zone_end_pfn() repeatedly because I expect at some point the sycronization issues with start_pfn & spanned_pages will need fixing, either by actually using the seqlock or clever memory barrier usage. Signed-off-by: Cody P Schafer Cc: David Hansen Cc: Catalin Marinas Cc: Johannes Weiner Cc: Mel Gorman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

mm: don't wait on congested zones in balance_pgdat()

2013-02-24T01:50:15Z

From: Zlatko Calusic Commit 92df3a723f84 ("mm: vmscan: throttle reclaim if encountering too many dirty pages under writeback") introduced waiting on congested zones based on a sane algorithm in shrink_inactive_list(). What this means is that there's no more need for throttling and additional heuristics in balance_pgdat(). So, let's remove it and tidy up the code. Signed-off-by: Zlatko Calusic Cc: Mel Gorman Cc: Minchan Kim Cc: Johannes Weiner Cc: Rik van Riel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

mm: remove MIGRATE_ISOLATE check in hotpath

2013-02-24T01:50:15Z

Several functions test MIGRATE_ISOLATE and some of those are hotpath but MIGRATE_ISOLATE is used only if we enable CONFIG_MEMORY_ISOLATION(ie, CMA, memory-hotplug and memory-failure) which are not common config option. So let's not add unnecessary overhead and code when we don't enable CONFIG_MEMORY_ISOLATION. Signed-off-by: Minchan Kim Cc: KOSAKI Motohiro Acked-by: Michal Nazarewicz Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

mm: use zone->present_pages instead of zone->managed_pages where appropriate

2013-02-24T01:50:14Z

Now we have zone->managed_pages for "pages managed by the buddy system in the zone", so replace zone->present_pages with zone->managed_pages if what the user really wants is number of allocatable pages. Signed-off-by: Jiang Liu Cc: Wen Congyang Cc: David Rientjes Cc: Jiang Liu Cc: Maciej Rutecki Cc: Chris Clayton Cc: "Rafael J . Wysocki" Cc: Mel Gorman Cc: Minchan Kim Cc: KAMEZAWA Hiroyuki Cc: Michal Hocko Cc: Jianguo Wu Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge tag 'balancenuma-v11' of git://git.kernel.org/pub/scm/linux/kernel/git/mel/linux-balancenuma

2012-12-16T23:18:08Z

Pull Automatic NUMA Balancing bare-bones from Mel Gorman: "There are three implementations for NUMA balancing, this tree (balancenuma), numacore which has been developed in tip/master and autonuma which is in aa.git. In almost all respects balancenuma is the dumbest of the three because its main impact is on the VM side with no attempt to be smart about scheduling. In the interest of getting the ball rolling, it would be desirable to see this much merged for 3.8 with the view to building scheduler smarts on top and adapting the VM where required for 3.9. The most recent set of comparisons available from different people are mel: https://lkml.org/lkml/2012/12/9/108 mingo: https://lkml.org/lkml/2012/12/7/331 tglx: https://lkml.org/lkml/2012/12/10/437 srikar: https://lkml.org/lkml/2012/12/10/397 The results are a mixed bag. In my own tests, balancenuma does reasonably well. It's dumb as rocks and does not regress against mainline. On the other hand, Ingo's tests shows that balancenuma is incapable of converging for this workloads driven by perf which is bad but is potentially explained by the lack of scheduler smarts. Thomas' results show balancenuma improves on mainline but falls far short of numacore or autonuma. Srikar's results indicate we all suffer on a large machine with imbalanced node sizes. My own testing showed that recent numacore results have improved dramatically, particularly in the last week but not universally. We've butted heads heavily on system CPU usage and high levels of migration even when it shows that overall performance is better. There are also cases where it regresses. Of interest is that for specjbb in some configurations it will regress for lower numbers of warehouses and show gains for higher numbers which is not reported by the tool by default and sometimes missed in treports. Recently I reported for numacore that the JVM was crashing with NullPointerExceptions but currently it's unclear what the source of this problem is. Initially I thought it was in how numacore batch handles PTEs but I'm no longer think this is the case. It's possible numacore is just able to trigger it due to higher rates of migration. These reports were quite late in the cycle so I/we would like to start with this tree as it contains much of the code we can agree on and has not changed significantly over the last 2-3 weeks." * tag 'balancenuma-v11' of git://git.kernel.org/pub/scm/linux/kernel/git/mel/linux-balancenuma: (50 commits) mm/rmap, migration: Make rmap_walk_anon() and try_to_unmap_anon() more scalable mm/rmap: Convert the struct anon_vma::mutex to an rwsem mm: migrate: Account a transhuge page properly when rate limiting mm: numa: Account for failed allocations and isolations as migration failures mm: numa: Add THP migration for the NUMA working set scanning fault case build fix mm: numa: Add THP migration for the NUMA working set scanning fault case. mm: sched: numa: Delay PTE scanning until a task is scheduled on a new node mm: sched: numa: Control enabling and disabling of NUMA balancing if !SCHED_DEBUG mm: sched: numa: Control enabling and disabling of NUMA balancing mm: sched: Adapt the scanning rate if a NUMA hinting fault does not migrate mm: numa: Use a two-stage filter to restrict pages being migrated for unlikely task<->node relationships mm: numa: migrate: Set last_nid on newly allocated page mm: numa: split_huge_page: Transfer last_nid on tail page mm: numa: Introduce last_nid to the page frame sched: numa: Slowly increase the scanning period as NUMA faults are handled mm: numa: Rate limit setting of pte_numa if node is saturated mm: numa: Rate limit the amount of memory that is migrated between nodes mm: numa: Structures for Migrate On Fault per NUMA migration rate limiting mm: numa: Migrate pages handled during a pmd_numa hinting fault mm: numa: Migrate on reference policy ...

mm: introduce new field "managed_pages" to struct zone

2012-12-13T01:38:34Z

Currently a zone's present_pages is calcuated as below, which is inaccurate and may cause trouble to memory hotplug. spanned_pages - absent_pages - memmap_pages - dma_reserve. During fixing bugs caused by inaccurate zone->present_pages, we found zone->present_pages has been abused. The field zone->present_pages may have different meanings in different contexts: 1) pages existing in a zone. 2) pages managed by the buddy system. For more discussions about the issue, please refer to: http://lkml.org/lkml/2012/11/5/866 https://patchwork.kernel.org/patch/1346751/ This patchset tries to introduce a new field named "managed_pages" to struct zone, which counts "pages managed by the buddy system". And revert zone->present_pages to count "physical pages existing in a zone", which also keep in consistence with pgdat->node_present_pages. We will set an initial value for zone->managed_pages in function free_area_init_core() and will adjust it later if the initial value is inaccurate. For DMA/normal zones, the initial value is set to: (spanned_pages - absent_pages - memmap_pages - dma_reserve) Later zone->managed_pages will be adjusted to the accurate value when the bootmem allocator frees all free pages to the buddy system in function free_all_bootmem_node() and free_all_bootmem(). The bootmem allocator doesn't touch highmem pages, so highmem zones' managed_pages is set to the accurate value "spanned_pages - absent_pages" in function free_area_init_core() and won't be updated anymore. This patch also adds a new field "managed_pages" to /proc/zoneinfo and sysrq showmem. [akpm@linux-foundation.org: small comment tweaks] Signed-off-by: Jiang Liu Cc: Wen Congyang Cc: David Rientjes Cc: Maciej Rutecki Tested-by: Chris Clayton Cc: "Rafael J . Wysocki" Cc: Mel Gorman Cc: Minchan Kim Cc: KAMEZAWA Hiroyuki Cc: Michal Hocko Cc: Jianguo Wu Cc: Johannes Weiner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

vmstat: use N_MEMORY instead N_HIGH_MEMORY

2012-12-13T01:38:33Z

N_HIGH_MEMORY stands for the nodes that has normal or high memory. N_MEMORY stands for the nodes that has any memory. The code here need to handle with the nodes which have memory, we should use N_MEMORY instead. Signed-off-by: Lai Jiangshan Acked-by: Christoph Lameter Signed-off-by: Wen Congyang Cc: Hillf Danton Cc: Lin Feng Cc: David Rientjes Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

thp, vmstat: implement HZP_ALLOC and HZP_ALLOC_FAILED events

2012-12-13T01:38:32Z

hzp_alloc is incremented every time a huge zero page is successfully allocated. It includes allocations which where dropped due race with other allocation. Note, it doesn't count every map of the huge zero page, only its allocation. hzp_alloc_failed is incremented if kernel fails to allocate huge zero page and falls back to using small pages. Signed-off-by: Kirill A. Shutemov Cc: Andrea Arcangeli Cc: Andi Kleen Cc: "H. Peter Anvin" Cc: Mel Gorman Cc: David Rientjes Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds