linux/lib/Makefile, branch v3.9

Move utf16 functions to kernel core and rename

2013-04-15T20:23:03Z

We want to be able to use the utf16 functions that are currently present in the EFI variables code in platform-specific code as well. Move them to the kernel core, and in the process rename them to accurately describe what they do - they don't handle UTF16, only UCS2. Signed-off-by: Matthew Garrett Signed-off-by: Matt Fleming

kfifo: move kfifo.c from kernel/ to lib/

2013-02-28T03:10:23Z

Move kfifo.c from kernel/ to lib/ Signed-off-by: Stefani Seibold Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

2012-12-18T17:58:09Z

Pull powerpc update from Benjamin Herrenschmidt: "The main highlight is probably some base POWER8 support. There's more to come such as transactional memory support but that will wait for the next one. Overall it's pretty quiet, or rather I've been pretty poor at picking things up from patchwork and reviewing them this time around and Kumar no better on the FSL side it seems..." * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (73 commits) powerpc+of: Rename and fix OF reconfig notifier error inject module powerpc: mpc5200: Add a3m071 board support powerpc/512x: don't compile any platform DIU code if the DIU is not enabled powerpc/mpc52xx: use module_platform_driver macro powerpc+of: Export of_reconfig_notifier_[register,unregister] powerpc/dma/raidengine: add raidengine device powerpc/iommu/fsl: Add PAMU bypass enable register to ccsr_guts struct powerpc/mpc85xx: Change spin table to cached memory powerpc/fsl-pci: Add PCI controller ATMU PM support powerpc/86xx: fsl_pcibios_fixup_bus requires CONFIG_PCI drivers/virt: the Freescale hypervisor driver doesn't need to check MSR[GS] powerpc/85xx: p1022ds: Use NULL instead of 0 for pointers powerpc: Disable relocation on exceptions when kexecing powerpc: Enable relocation on during exceptions at boot powerpc: Move get_longbusy_msecs into hvcall.h and remove duplicate function powerpc: Add wrappers to enable/disable relocation on exceptions powerpc: Add set_mode hcall powerpc: Setup relocation on exceptions for bare metal systems powerpc: Move initial mfspr LPCR out of __init_LPCR powerpc: Add relocation on exception vector handlers ...

percpu_rw_semaphore: introduce CONFIG_PERCPU_RWSEM

2012-12-18T01:15:18Z

Currently only block_dev and uprobes use percpu_rw_semaphore, add the config option selected by BLOCK || UPROBES. Signed-off-by: Oleg Nesterov Cc: Anton Arapov Cc: Ingo Molnar Cc: Linus Torvalds Cc: Michal Marek Cc: Mikulas Patocka Cc: "Paul E. McKenney" Cc: Peter Zijlstra Cc: Srikar Dronamraju Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

percpu_rw_semaphore: reimplement to not block the readers unnecessarily

2012-12-18T01:15:18Z

Currently the writer does msleep() plus synchronize_sched() 3 times to acquire/release the semaphore, and during this time the readers are blocked completely. Even if the "write" section was not actually started or if it was already finished. With this patch down_write/up_write does synchronize_sched() twice and down_read/up_read are still possible during this time, just they use the slow path. percpu_down_write() first forces the readers to use rw_semaphore and increment the "slow" counter to take the lock for reading, then it takes that rw_semaphore for writing and blocks the readers. Also. With this patch the code relies on the documented behaviour of synchronize_sched(), it doesn't try to pair synchronize_sched() with barrier. Signed-off-by: Oleg Nesterov Reviewed-by: Paul E. McKenney Cc: Linus Torvalds Cc: Mikulas Patocka Cc: Peter Zijlstra Cc: Ingo Molnar Cc: Srikar Dronamraju Cc: Ananth N Mavinakayanahalli Cc: Anton Arapov Cc: Jens Axboe Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge branch 'x86-acpi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2012-12-14T18:03:23Z

Pull x86 ACPI update from Peter Anvin: "This is a patchset which didn't make the last merge window. It adds a debugging capability to feed ACPI tables via the initramfs. On a grander scope, it formalizes using the initramfs protocol for feeding arbitrary blobs which need to be accessed early to the kernel: they are fed first in the initramfs blob (lots of bootloaders can concatenate this at boot time, others can use a single file) in an uncompressed cpio archive using filenames starting with "kernel/". The ACPI maintainers requested that this patchset be fed via the x86 tree rather than the ACPI tree as the footprint in the general x86 code is much bigger than in the ACPI code proper." * 'x86-acpi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: X86 ACPI: Use #ifdef not #if for CONFIG_X86 check ACPI: Fix build when disabled ACPI: Document ACPI table overriding via initrd ACPI: Create acpi_table_taint() function to avoid code duplication ACPI: Implement physical address table override ACPI: Store valid ACPI tables passed via early initrd in reserved memblock areas x86, acpi: Introduce x86 arch specific arch_reserve_mem_area() for e820 handling lib: Add early cpio decoder

powerpc+of: Rename and fix OF reconfig notifier error inject module

2012-12-13T23:32:52Z

This module used to inject errors in the pSeries specific dynamic reconfiguration notifiers. Those are gone however, replaced by generic notifiers for changes to the device-tree. So let's update the module to deal with these instead and rename it along the way. Signed-off-by: Benjamin Herrenschmidt Acked-by: Akinobu Mita

Merge tag 'driver-core-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2012-12-11T21:13:55Z

Pull driver core updates from Greg Kroah-Hartman: "Here's the large driver core updates for 3.8-rc1. The biggest thing here is the various __dev* marking removals. This is going to be a pain for the merge with different subsystem trees, I know, but all of the patches included here have been ACKed by their various subsystem maintainers, as they wanted them to go through here. If this is too much of a pain, I can pull all of them out of this tree and just send you one with the other fixes/updates and then, after 3.8-rc1 is out, do the rest of the removals to ensure we catch them all, it's up to you. The merges should all be trivial, and Stephen has been doing them all in linux-next for a few weeks now quite easily. Other than the __dev* marking removals, there's nothing major here, some firmware loading updates and other minor things in the driver core. All of these have (much to Stephen's annoyance), been in linux-next for a while. Signed-off-by: Greg Kroah-Hartman " Fixed up trivial conflicts in drivers/gpio/gpio-{em,stmpe}.c due to gpio update. * tag 'driver-core-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (93 commits) modpost.c: Stop checking __dev* section mismatches init.h: Remove __dev* sections from the kernel acpi: remove use of __devinit PCI: Remove __dev* markings PCI: Always build setup-bus when PCI is enabled PCI: Move pci_uevent into pci-driver.c PCI: Remove CONFIG_HOTPLUG ifdefs unicore32/PCI: Remove CONFIG_HOTPLUG ifdefs sh/PCI: Remove CONFIG_HOTPLUG ifdefs powerpc/PCI: Remove CONFIG_HOTPLUG ifdefs mips/PCI: Remove CONFIG_HOTPLUG ifdefs microblaze/PCI: Remove CONFIG_HOTPLUG ifdefs dma: remove use of __devinit dma: remove use of __devexit_p firewire: remove use of __devinitdata firewire: remove use of __devinit leds: remove use of __devexit leds: remove use of __devinit leds: remove use of __devexit_p mmc: remove use of __devexit ...

lib/Makefile: Fix oid_registry build dependency

2012-12-06T06:55:01Z

It is $(obj)/oid_registry.o that is dependent on $(obj)/oid_registry_data.c. The object file cannot be built until $(obj)/oid_registry_data.c has been generated. A periodic and hard to reproduce parallel build failure is due to this incorrect lib/Makefile dependency. The compile error is completely disingenuous. GEN lib/oid_registry_data.c Compiling 49 OIDs CC lib/oid_registry.o gcc: error: lib/oid_registry.c: No such file or directory gcc: fatal error: no input files compilation terminated. make[3]: *** [lib/oid_registry.o] Error 4 Cc: Andrew Morton Cc: Akinobu Mita Cc: Michel Lespinasse Cc: David Howells Cc: "David S. Miller" Signed-off-by: Tim Gardner Signed-off-by: Rusty Russell

lib: kobject_uevent is no longer dependant on CONFIG_HOTPLUG

2012-11-28T18:52:58Z

CONFIG_HOTPLUG is being removed so kobject_uevent needs to always be part of the library. Signed-off-by: Bill Pemberton Signed-off-by: Greg Kroah-Hartman