linux/kernel, branch v3.4.82

genirq: Add missing irq_to_desc export for CONFIG_SPARSE_IRQ=n

2014-02-22T18:32:46Z

commit 2c45aada341121438affc4cb8d5b4cfaa2813d3d upstream. In allmodconfig builds for sparc and any other arch which does not set CONFIG_SPARSE_IRQ, the following will be seen at modpost: CC [M] lib/cpu-notifier-error-inject.o CC [M] lib/pm-notifier-error-inject.o ERROR: "irq_to_desc" [drivers/gpio/gpio-mcp23s08.ko] undefined! make[2]: *** [__modpost] Error 1 This happens because commit 3911ff30f5 ("genirq: export handle_edge_irq() and irq_to_desc()") added one export for it, but there were actually two instances of it, in an if/else clause for CONFIG_SPARSE_IRQ. Add the second one. Signed-off-by: Paul Gortmaker Cc: Jiri Kosina Link: http://lkml.kernel.org/r/1392057610-11514-1-git-send-email-paul.gortmaker@windriver.com Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

ring-buffer: Fix first commit on sub-buffer having non-zero delta

2014-02-22T18:32:46Z

commit d651aa1d68a2f0a7ee65697b04c6a92f8c0a12f2 upstream. Each sub-buffer (buffer page) has a full 64 bit timestamp. The events on that page use a 27 bit delta against that timestamp in order to save on bits written to the ring buffer. If the time between events is larger than what the 27 bits can hold, a "time extend" event is added to hold the entire 64 bit timestamp again and the events after that hold a delta from that timestamp. As a "time extend" is always paired with an event, it is logical to just allocate the event with the time extend, to make things a bit more efficient. Unfortunately, when the pairing code was written, it removed the "delta = 0" from the first commit on a page, causing the events on the page to be slightly skewed. Fixes: 69d1b839f7ee "ring-buffer: Bind time extend and data events together" Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman

time: Fix overflow when HZ is smaller than 60

2014-02-22T18:32:46Z

commit 80d767d770fd9c697e434fd080c2db7b5c60c6dd upstream. When compiling for the IA-64 ski emulator, HZ is set to 32 because the emulation is slow and we don't want to waste too many cycles processing timers. Alpha also has an option to set HZ to 32. This causes integer underflow in kernel/time/jiffies.c: kernel/time/jiffies.c:66:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] .mult = NSEC_PER_JIFFY << JIFFIES_SHIFT, /* details above */ ^ This patch reduces the JIFFIES_SHIFT value to avoid the overflow. Signed-off-by: Mikulas Patocka Link: http://lkml.kernel.org/r/alpine.LRH.2.02.1401241639100.23871@file01.intranet.prod.int.rdu2.redhat.com Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

PM / Hibernate: Hibernate/thaw fixes/improvements

2014-02-20T18:45:33Z

commit 5a21d489fd9541a4a66b9a500659abaca1b19a51 upstream. 1. Do not allocate memory for buffers from emergency pools, unless absolutely required. Do not warn about and do not retry non-essential failed allocations. 2. Do not check the amount of free pages left on every single page write, but wait until one map is completely populated and then check. 3. Set maximum number of pages for read buffering consistently, instead of inadvertently depending on the size of the sector type. 4. Fix copyright line, which I missed when I submitted the hibernation threading patch. 5. Dispense with bit shifting arithmetic to improve readability. 6. Really recalculate the number of pages required to be free after all allocations have been done. 7. Fix calculation of pages required for read buffering. Only count in pages that do not belong to high memory. Signed-off-by: Bojan Smojver Signed-off-by: Rafael J. Wysocki Signed-off-by: Ben Hutchings Cc: Li Zefan Signed-off-by: Greg Kroah-Hartman

sched/nohz: Fix rq->cpu_load calculations some more

2014-02-20T18:45:32Z

commit 5aaa0b7a2ed5b12692c9ffb5222182bd558d3146 upstream. Follow up on commit 556061b00 ("sched/nohz: Fix rq->cpu_load[] calculations") since while that fixed the busy case it regressed the mostly idle case. Add a callback from the nohz exit to also age the rq->cpu_load[] array. This closes the hole where either there was no nohz load balance pass during the nohz, or there was a 'significant' amount of idle time between the last nohz balance and the nohz exit. So we'll update unconditionally from the tick to not insert any accidental 0 load periods while busy, and we try and catch up from nohz idle balance and nohz exit. Both these are still prone to missing a jiffy, but that has always been the case. Signed-off-by: Peter Zijlstra Cc: pjt@google.com Cc: Venkatesh Pallipadi Link: http://lkml.kernel.org/n/tip-kt0trz0apodbf84ucjfdbr1a@git.kernel.org Signed-off-by: Ingo Molnar Cc: Li Zefan Signed-off-by: Greg Kroah-Hartman

sched/nohz: Fix rq->cpu_load[] calculations

2014-02-20T18:45:32Z

commit 556061b00c9f2fd6a5524b6bde823ef12f299ecf upstream. While investigating why the load-balancer did funny I found that the rq->cpu_load[] tables were completely screwy.. a bit more digging revealed that the updates that got through were missing ticks followed by a catchup of 2 ticks. The catchup assumes the cpu was idle during that time (since only nohz can cause missed ticks and the machine is idle etc..) this means that esp. the higher indices were significantly lower than they ought to be. The reason for this is that its not correct to compare against jiffies on every jiffy on any other cpu than the cpu that updates jiffies. This patch cludges around it by only doing the catch-up stuff from nohz_idle_balance() and doing the regular stuff unconditionally from the tick. Signed-off-by: Peter Zijlstra Cc: pjt@google.com Cc: Venkatesh Pallipadi Link: http://lkml.kernel.org/n/tip-tp4kj18xdd5aj4vvj0qg55s2@git.kernel.org Signed-off-by: Ingo Molnar Cc: Li Zefan Signed-off-by: Greg Kroah-Hartman

ftrace: Have function graph only trace based on global_ops filters

2014-02-20T18:45:32Z

commit 23a8e8441a0a74dd612edf81dc89d1600bc0a3d1 upstream. Doing some different tests, I discovered that function graph tracing, when filtered via the set_ftrace_filter and set_ftrace_notrace files, does not always keep with them if another function ftrace_ops is registered to trace functions. The reason is that function graph just happens to trace all functions that the function tracer enables. When there was only one user of function tracing, the function graph tracer did not need to worry about being called by functions that it did not want to trace. But now that there are other users, this becomes a problem. For example, one just needs to do the following: # cd /sys/kernel/debug/tracing # echo schedule > set_ftrace_filter # echo function_graph > current_tracer # cat trace [..] 0) | schedule() { ------------------------------------------ 0) -0 => rcu_pre-7 ------------------------------------------ 0) ! 2980.314 us | } 0) | schedule() { ------------------------------------------ 0) rcu_pre-7 => -0 ------------------------------------------ 0) + 20.701 us | } # echo 1 > /proc/sys/kernel/stack_tracer_enabled # cat trace [..] 1) + 20.825 us | } 1) + 21.651 us | } 1) + 30.924 us | } /* SyS_ioctl */ 1) | do_page_fault() { 1) | __do_page_fault() { 1) 0.274 us | down_read_trylock(); 1) 0.098 us | find_vma(); 1) | handle_mm_fault() { 1) | _raw_spin_lock() { 1) 0.102 us | preempt_count_add(); 1) 0.097 us | do_raw_spin_lock(); 1) 2.173 us | } 1) | do_wp_page() { 1) 0.079 us | vm_normal_page(); 1) 0.086 us | reuse_swap_page(); 1) 0.076 us | page_move_anon_rmap(); 1) | unlock_page() { 1) 0.082 us | page_waitqueue(); 1) 0.086 us | __wake_up_bit(); 1) 1.801 us | } 1) 0.075 us | ptep_set_access_flags(); 1) | _raw_spin_unlock() { 1) 0.098 us | do_raw_spin_unlock(); 1) 0.105 us | preempt_count_sub(); 1) 1.884 us | } 1) 9.149 us | } 1) + 13.083 us | } 1) 0.146 us | up_read(); When the stack tracer was enabled, it enabled all functions to be traced, which now the function graph tracer also traces. This is a side effect that should not occur. To fix this a test is added when the function tracing is changed, as well as when the graph tracer is enabled, to see if anything other than the ftrace global_ops function tracer is enabled. If so, then the graph tracer calls a test trampoline that will look at the function that is being traced and compare it with the filters defined by the global_ops. As an optimization, if there's no other function tracers registered, or if the only registered function tracers also use the global ops, the function graph infrastructure will call the registered function graph callback directly and not go through the test trampoline. Fixes: d2d45c7a03a2 "tracing: Have stack_tracer use a separate list of functions" Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman

ftrace: Fix synchronization location disabling and freeing ftrace_ops

2014-02-20T18:45:32Z

commit a4c35ed241129dd142be4cadb1e5a474a56d5464 upstream. The synchronization needed after ftrace_ops are unregistered must happen after the callback is disabled from becing called by functions. The current location happens after the function is being removed from the internal lists, but not after the function callbacks were disabled, leaving the functions susceptible of being called after their callbacks are freed. This affects perf and any externel users of function tracing (LTTng and SystemTap). Fixes: cdbe61bfe704 "ftrace: Allow dynamically allocated function tracers" Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman

ftrace: Synchronize setting function_trace_op with ftrace_trace_function

2014-02-20T18:45:32Z

commit 405e1d834807e51b2ebd3dea81cb51e53fb61504 upstream. [ Partial commit backported to 3.4. The ftrace_sync() code by this is required for other fixes that 3.4 needs. ] ftrace_trace_function is a variable that holds what function will be called directly by the assembly code (mcount). If just a single function is registered and it handles recursion itself, then the assembly will call that function directly without any helper function. It also passes in the ftrace_op that was registered with the callback. The ftrace_op to send is stored in the function_trace_op variable. The ftrace_trace_function and function_trace_op needs to be coordinated such that the called callback wont be called with the wrong ftrace_op, otherwise bad things can happen if it expected a different op. Luckily, there's no callback that doesn't use the helper functions that requires this. But there soon will be and this needs to be fixed. Use a set_function_trace_op to store the ftrace_op to set the function_trace_op to when it is safe to do so (during the update function within the breakpoint or stop machine calls). Or if dynamic ftrace is not being used (static tracing) then we have to do a bit more synchronization when the ftrace_trace_function is set as that takes affect immediately (as oppose to dynamic ftrace doing it with the modification of the trampoline). Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman

printk: Fix scheduling-while-atomic problem in console_cpu_notify()

2014-02-20T18:45:32Z

commit 85eae82a0855d49852b87deac8653e4ebc8b291f upstream. The console_cpu_notify() function runs with interrupts disabled in the CPU_DYING case. It therefore cannot block, for example, as will happen when it calls console_lock(). Therefore, remove the CPU_DYING leg of the switch statement to avoid this problem. Signed-off-by: Paul E. McKenney Reviewed-by: Srivatsa S. Bhat Signed-off-by: Linus Torvalds Cc: Guillaume Morin Signed-off-by: Greg Kroah-Hartman