linux/kernel/trace/trace_output.c, branch v3.14-rc5

ftrace, sched: Add TRACE_FLAG_PREEMPT_RESCHED

2013-11-11T11:43:39Z

Since the introduction of PREEMPT_NEED_RESCHED in: f27dde8deef3 ("sched: Add NEED_RESCHED to the preempt_count") we need to be able to look at both TIF_NEED_RESCHED and PREEMPT_NEED_RESCHED to understand the full preemption behaviour. Add it to the trace output. Signed-off-by: Peter Zijlstra Acked-by: Steven Rostedt Cc: Fengguang Wu Cc: Huang Ying Cc: Yuanhan Liu Link: http://lkml.kernel.org/r/20131004152826.GP3081@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar

tracing: Use trace_seq_puts()/trace_seq_putc() where possible

2013-07-19T01:30:36Z

For string without format specifiers, use trace_seq_puts() or trace_seq_putc(). Link: http://lkml.kernel.org/r/51E3B3AC.1000605@huawei.com Signed-off-by: zhangwei(Jovi) [ fixed a trace_seq_putc(s, " ") to trace_seq_putc(s, ' ') ] Signed-off-by: Steven Rostedt

Merge tag 'trace-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

2013-04-29T20:55:38Z

Pull tracing updates from Steven Rostedt: "Along with the usual minor fixes and clean ups there are a few major changes with this pull request. 1) Multiple buffers for the ftrace facility This feature has been requested by many people over the last few years. I even heard that Google was about to implement it themselves. I finally had time and cleaned up the code such that you can now create multiple instances of the ftrace buffer and have different events go to different buffers. This way, a low frequency event will not be lost in the noise of a high frequency event. Note, currently only events can go to different buffers, the tracers (ie function, function_graph and the latency tracers) still can only be written to the main buffer. 2) The function tracer triggers have now been extended. The function tracer had two triggers. One to enable tracing when a function is hit, and one to disable tracing. Now you can record a stack trace on a single (or many) function(s), take a snapshot of the buffer (copy it to the snapshot buffer), and you can enable or disable an event to be traced when a function is hit. 3) A perf clock has been added. A "perf" clock can be chosen to be used when tracing. This will cause ftrace to use the same clock as perf uses, and hopefully this will make it easier to interleave the perf and ftrace data for analysis." * tag 'trace-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (82 commits) tracepoints: Prevent null probe from being added tracing: Compare to 1 instead of zero for is_signed_type() tracing: Remove obsolete macro guard _TRACE_PROFILE_INIT ftrace: Get rid of ftrace_profile_bits tracing: Check return value of tracing_init_dentry() tracing: Get rid of unneeded key calculation in ftrace_hash_move() tracing: Reset ftrace_graph_filter_enabled if count is zero tracing: Fix off-by-one on allocating stat->pages kernel: tracing: Use strlcpy instead of strncpy tracing: Update debugfs README file tracing: Fix ftrace_dump() tracing: Rename trace_event_mutex to trace_event_sem tracing: Fix comment about prefix in arch_syscall_match_sym_name() tracing: Convert trace_destroy_fields() to static tracing: Move find_event_field() into trace_events.c tracing: Use TRACE_MAX_PRINT instead of constant tracing: Use pr_warn_once instead of open coded implementation ring-buffer: Add ring buffer startup selftest tracing: Bring Documentation/trace/ftrace.txt up to date tracing: Add "perf" trace_clock ... Conflicts: kernel/trace/ftrace.c kernel/trace/trace.c

tracing: Rename trace_event_mutex to trace_event_sem

2013-03-15T17:22:10Z

trace_event_mutex is an rw semaphore now, not a mutex, change the name. Link: http://lkml.kernel.org/r/513D843B.40109@huawei.com Signed-off-by: zhangwei(Jovi) [ Forward ported to my new code ] Signed-off-by: Steven Rostedt

tracing: Add trace_puts() for even faster trace_printk() tracing

2013-03-15T04:35:55Z

The trace_printk() is extremely fast and is very handy as it can be used in any context (including NMIs!). But it still requires scanning the fmt string for parsing the args. Even the trace_bprintk() requires a scan to know what args will be saved, although it doesn't copy the format string itself. Several times trace_printk() has no args, and wastes cpu cycles scanning the fmt string. Adding trace_puts() allows the developer to use an even faster tracing method that only saves the pointer to the string in the ring buffer without doing any format parsing at all. This will help remove even more of the "Heisenbug" effect, when debugging. Also fixed up the F_printk()s for the ftrace internal bprint and print events. Cc: Thomas Gleixner Cc: Peter Zijlstra Cc: Frederic Weisbecker Signed-off-by: Steven Rostedt

tracing: Consolidate max_tr into main trace_array structure

2013-03-15T04:35:40Z

Currently, the way the latency tracers and snapshot feature works is to have a separate trace_array called "max_tr" that holds the snapshot buffer. For latency tracers, this snapshot buffer is used to swap the running buffer with this buffer to save the current max latency. The only items needed for the max_tr is really just a copy of the buffer itself, the per_cpu data pointers, the time_start timestamp that states when the max latency was triggered, and the cpu that the max latency was triggered on. All other fields in trace_array are unused by the max_tr, making the max_tr mostly bloat. This change removes the max_tr completely, and adds a new structure called trace_buffer, that holds the buffer pointer, the per_cpu data pointers, the time_start timestamp, and the cpu where the latency occurred. The trace_array, now has two trace_buffers, one for the normal trace and one for the max trace or snapshot. By doing this, not only do we remove the bloat from the max_trace but the instances of traces can now use their own snapshot feature and not have just the top level global_trace have the snapshot feature and latency tracers for itself. Signed-off-by: Steven Rostedt

tracing: Add a helper function for event print functions

2013-03-15T04:34:51Z

Move duplicate code in event print functions to a helper function. This shrinks the size of the kernel by ~13K. text data bss dec hex filename 6596137 1743966 10138672 18478775 119f6b7 vmlinux.o.old 6583002 1743849 10138672 18465523 119c2f3 vmlinux.o.new Link: http://lkml.kernel.org/r/51258746.2060304@huawei.com Signed-off-by: Li Zefan Signed-off-by: Steven Rostedt

hlist: drop the node parameter from iterators

2013-02-28T03:10:24Z

I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin Acked-by: Paul E. McKenney Signed-off-by: Sasha Levin Cc: Wu Fengguang Cc: Marcelo Tosatti Cc: Gleb Natapov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

tracing: Format non-nanosec times from tsc clock without a decimal point.

2012-11-13T20:48:40Z

With the addition of the "tsc" clock, formatting timestamps to look like fractional seconds is misleading. Mark clocks as either in nanoseconds or not, and format non-nanosecond timestamps as decimal integers. Tested: $ cd /sys/kernel/debug/tracing/ $ cat trace_clock [local] global tsc $ echo sched_switch > set_event $ echo 1 > tracing_on ; sleep 0.0005 ; echo 0 > tracing_on $ cat trace -0 [000] 6330.555552: sched_switch: prev_comm=swapper prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=bash next_pid=29964 next_prio=120 sleep-29964 [000] 6330.555628: sched_switch: prev_comm=bash prev_pid=29964 prev_prio=120 prev_state=S ==> next_comm=swapper next_pid=0 next_prio=120 ... $ echo 1 > options/latency-format $ cat trace -0 0 4104553247us+: sched_switch: prev_comm=swapper prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=bash next_pid=29964 next_prio=120 sleep-29964 0 4104553322us+: sched_switch: prev_comm=bash prev_pid=29964 prev_prio=120 prev_state=S ==> next_comm=swapper next_pid=0 next_prio=120 ... $ echo tsc > trace_clock $ cat trace $ echo 1 > tracing_on ; sleep 0.0005 ; echo 0 > tracing_on $ echo 0 > options/latency-format $ cat trace -0 [000] 16490053398357: sched_switch: prev_comm=swapper prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=bash next_pid=31128 next_prio=120 sleep-31128 [000] 16490053588518: sched_switch: prev_comm=bash prev_pid=31128 prev_prio=120 prev_state=S ==> next_comm=swapper next_pid=0 next_prio=120 ... echo 1 > options/latency-format $ cat trace -0 0 91557653238+: sched_switch: prev_comm=swapper prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=bash next_pid=31128 next_prio=120 sleep-31128 0 91557843399+: sched_switch: prev_comm=bash prev_pid=31128 prev_prio=120 prev_state=S ==> next_comm=swapper next_pid=0 next_prio=120 ... v2: Move arch-specific bits out of generic code. v4: Fix x86_32 build due to 64-bit division. Google-Bug-Id: 6980623 Link: http://lkml.kernel.org/r/1352837903-32191-2-git-send-email-dhsharp@google.com Cc: Masami Hiramatsu Signed-off-by: David Sharp Signed-off-by: Steven Rostedt

tracing: Register the ftrace internal events during early boot

2012-06-14T19:22:14Z

All trace events including ftrace internel events (like trace_printk and function tracing), register functions that describe how to print their output. The events may be recorded as soon as the ring buffer is allocated, but they are just raw binary in the buffer. The mapping of event ids to how to print them are held within a structure that is registered on system boot. If a crash happens in boot up before these functions are registered then their output (via ftrace_dump_on_oops) will be useless: Dumping ftrace buffer: --------------------------------- <...>-1 0.... 319705us : Unknown type 6 --------------------------------- This can be quite frustrating for a kernel developer trying to see what is going wrong. There's no reason to register them so late in the boot up process. They can be registered by early_initcall(). Reported-by: Peter Zijlstra Signed-off-by: Steven Rostedt