linux/kernel/time, branch v3.4.45

clockevents: Set dummy handler on CPU_DEAD shutdown

2013-05-08T02:51:56Z

commit 6f7a05d7018de222e40ca003721037a530979974 upstream. Vitaliy reported that a per cpu HPET timer interrupt crashes the system during hibernation. What happens is that the per cpu HPET timer gets shut down when the nonboot cpus are stopped. When the nonboot cpus are onlined again the HPET code sets up the MSI interrupt which fires before the clock event device is registered. The event handler is still set to hrtimer_interrupt, which then crashes the machine due to highres mode not being active. See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=700333 There is no real good way to avoid that in the HPET code. The HPET code alrady has a mechanism to detect spurious interrupts when event handler == NULL for a similar reason. We can handle that in the clockevent/tick layer and replace the previous functional handler with a dummy handler like we do in tick_setup_new_device(). The original clockevents code did this in clockevents_exchange_device(), but that got removed by commit 7c1e76897 (clockevents: prevent clockevent event_handler ending up handler_noop) which forgot to fix it up in tick_shutdown(). Same issue with the broadcast device. Reported-by: Vitaliy Fillipov Cc: Ben Hutchings Cc: 700333@bugs.debian.org Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

nohz: Make tick_nohz_irq_exit() irq safe

2013-03-28T19:12:27Z

commit e5ab012c3271990e8457055c25cafddc1ae8aa6b upstream. As it stands, irq_exit() may or may not be called with irqs disabled, depending on __ARCH_IRQ_EXIT_IRQS_DISABLED that the arch can define. It makes tick_nohz_irq_exit() unsafe. For example two interrupts can race in tick_nohz_stop_sched_tick(): the inner most one computes the expiring time on top of the timer list, then it's interrupted right before reprogramming the clock. The new interrupt enqueues a new timer list timer, it reprogram the clock to take it into account and it exits. The CPUs resumes the inner most interrupt and performs the clock reprogramming without considering the new timer list timer. This regression has been introduced by: 280f06774afedf849f0b34248ed6aff57d0f6908 ("nohz: Separate out irq exit and idle loop dyntick logic") Let's fix it right now with the appropriate protections. A saner long term solution will be to remove __ARCH_IRQ_EXIT_IRQS_DISABLED and mandate that irq_exit() is called with interrupts disabled. Signed-off-by: Frederic Weisbecker Cc: Peter Zijlstra Cc: Ingo Molnar Cc: Linus Torvalds Link: http://lkml.kernel.org/r/1361373336-11337-1-git-send-email-fweisbec@gmail.com Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman Signed-off-by: Thomas Gleixner Signed-off-by: Lingzhu Xiang Reviewed-by: CAI Qian Signed-off-by: Greg Kroah-Hartman

clockevents: Don't allow dummy broadcast timers

2013-03-28T19:12:26Z

commit a7dc19b8652c862d5b7c4d2339bd3c428bd29c4a upstream. Currently tick_check_broadcast_device doesn't reject clock_event_devices with CLOCK_EVT_FEAT_DUMMY, and may select them in preference to real hardware if they have a higher rating value. In this situation, the dummy timer is responsible for broadcasting to itself, and the core clockevents code may attempt to call non-existent callbacks for programming the dummy, eventually leading to a panic. This patch makes tick_check_broadcast_device always reject dummy timers, preventing this problem. Signed-off-by: Mark Rutland Cc: linux-arm-kernel@lists.infradead.org Cc: Jon Medhurst (Tixy) Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

timekeeping: Cast raw_interval to u64 to avoid shift overflow

2012-12-03T19:47:23Z

commit 5b3900cd409466c0070b234d941650685ad0c791 upstream. We fixed a bunch of integer overflows in timekeeping code during the 3.6 cycle. I did an audit based on that and found this potential overflow. Signed-off-by: Dan Carpenter Acked-by: John Stultz Link: http://lkml.kernel.org/r/20121009071823.GA19159@elgon.mountain Signed-off-by: Thomas Gleixner Cc: Ben Hutchings [ herton: adapt for 3.5, timekeeper instead of tk pointer ] Signed-off-by: Herton Ronaldo Krzesinski Signed-off-by: Greg Kroah-Hartman

time: Move ktime_t overflow checking into timespec_valid_strict

2012-10-02T17:30:36Z

commit cee58483cf56e0ba355fdd97ff5e8925329aa936 upstream Andreas Bombe reported that the added ktime_t overflow checking added to timespec_valid in commit 4e8b14526ca7 ("time: Improve sanity checking of timekeeping inputs") was causing problems with X.org because it caused timeouts larger then KTIME_T to be invalid. Previously, these large timeouts would be clamped to KTIME_MAX and would never expire, which is valid. This patch splits the ktime_t overflow checking into a new timespec_valid_strict function, and converts the timekeeping codes internal checking to use this more strict function. Reported-and-tested-by: Andreas Bombe Cc: Zhouping Liu Cc: Ingo Molnar Cc: Prarit Bhargava Cc: Thomas Gleixner Signed-off-by: John Stultz Signed-off-by: Linus Torvalds Signed-off-by: John Stultz Signed-off-by: Greg Kroah-Hartman

time: Avoid making adjustments if we haven't accumulated anything

2012-10-02T17:30:36Z

commit bf2ac312195155511a0f79325515cbb61929898a upstream. If update_wall_time() is called and the current offset isn't large enough to accumulate, avoid re-calling timekeeping_adjust which may change the clock freq and can cause 1ns inconsistencies with CLOCK_REALTIME_COARSE/CLOCK_MONOTONIC_COARSE. Signed-off-by: John Stultz Cc: Prarit Bhargava Cc: Ingo Molnar Link: http://lkml.kernel.org/r/1345595449-34965-5-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner Signed-off-by: John Stultz Signed-off-by: Greg Kroah-Hartman

time: Improve sanity checking of timekeeping inputs

2012-10-02T17:30:36Z

commit 4e8b14526ca7fb046a81c94002c1c43b6fdf0e9b upstream. Unexpected behavior could occur if the time is set to a value large enough to overflow a 64bit ktime_t (which is something larger then the year 2262). Also unexpected behavior could occur if large negative offsets are injected via adjtimex. So this patch improves the sanity check timekeeping inputs by improving the timespec_valid() check, and then makes better use of timespec_valid() to make sure we don't set the time to an invalid negative value or one that overflows ktime_t. Note: This does not protect from setting the time close to overflowing ktime_t and then letting natural accumulation cause the overflow. Reported-by: CAI Qian Reported-by: Sasha Levin Signed-off-by: John Stultz Cc: Peter Zijlstra Cc: Prarit Bhargava Cc: Zhouping Liu Cc: Ingo Molnar Link: http://lkml.kernel.org/r/1344454580-17031-1-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner Signed-off-by: John Stultz Signed-off-by: Greg Kroah-Hartman

sched: Add missing call to calc_load_exit_idle()

2012-10-02T17:30:05Z

commit 749c8814f08f12baa4a9c2812a7c6ede7d69507d upstream. Azat Khuzhin reported high loadavg in Linux v3.6 After checking the upstream scheduler code, I found Peter's commit: 5167e8d5417b sched/nohz: Rewrite and fix load-avg computation -- again not fully applied, missing the call to calc_load_exit_idle(). After that idle exit in sampling window will always be calculated to non-idle, and the load will be higher than normal. This patch adds the missing call to calc_load_exit_idle(). Signed-off-by: Charles Wang Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1345449754-27130-1-git-send-email-muming.wq@gmail.com Signed-off-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman

ntp: Fix STA_INS/DEL clearing bug

2012-07-29T15:04:18Z

commit 6b1859dba01c7d512b72d77e3fd7da8354235189 upstream. In commit 6b43ae8a619d17c4935c3320d2ef9e92bdeed05d, I introduced a bug that kept the STA_INS or STA_DEL bit from being cleared from time_status via adjtimex() without forcing STA_PLL first. Usually once the STA_INS is set, it isn't cleared until the leap second is applied, so its unlikely this affected anyone. However during testing I noticed it took some effort to cancel a leap second once STA_INS was set. Signed-off-by: John Stultz Cc: Ingo Molnar Cc: Peter Zijlstra Cc: Richard Cochran Cc: Prarit Bhargava Link: http://lkml.kernel.org/r/1342156917-25092-2-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

timekeeping: Add missing update call in timekeeping_resume()

2012-07-19T15:59:00Z

This is a backport of 3e997130bd2e8c6f5aaa49d6e3161d4d29b43ab0 The leap second rework unearthed another issue of inconsistent data. On timekeeping_resume() the timekeeper data is updated, but nothing calls timekeeping_update(), so now the update code in the timer interrupt sees stale values. This has been the case before those changes, but then the timer interrupt was using stale data as well so this went unnoticed for quite some time. Add the missing update call, so all the data is consistent everywhere. Reported-by: Andreas Schwab Reported-and-tested-by: "Rafael J. Wysocki" Reported-and-tested-by: Martin Steigerwald Cc: John Stultz Cc: Ingo Molnar Cc: Peter Zijlstra , Cc: Prarit Bhargava Signed-off-by: Thomas Gleixner Signed-off-by: John Stultz Signed-off-by: Linus Torvalds Cc: Prarit Bhargava Cc: Thomas Gleixner Signed-off-by: John Stultz Signed-off-by: Greg Kroah-Hartman