linux/kernel/irq, branch v3.5.2

random: remove rand_initialize_irq()

2012-08-15T14:52:49Z

commit c5857ccf293968348e5eb4ebedc68074de3dcda6 upstream. With the new interrupt sampling system, we are no longer using the timer_rand_state structure in the irq descriptor, so we can stop initializing it now. [ Merged in fixes from Sedat to find some last missing references to rand_initialize_irq() ] Signed-off-by: "Theodore Ts'o" Signed-off-by: Sedat Dilek Signed-off-by: Greg Kroah-Hartman

random: make 'add_interrupt_randomness()' do something sane

2012-08-15T14:52:47Z

commit 775f4b297b780601e61787b766f306ed3e1d23eb upstream. We've been moving away from add_interrupt_randomness() for various reasons: it's too expensive to do on every interrupt, and flooding the CPU with interrupts could theoretically cause bogus floods of entropy from a somewhat externally controllable source. This solves both problems by limiting the actual randomness addition to just once a second or after 64 interrupts, whicever comes first. During that time, the interrupt cycle data is buffered up in a per-cpu pool. Also, we make sure the the nonblocking pool used by urandom is initialized before we start feeding the normal input pool. This assures that /dev/urandom is returning unpredictable data as soon as possible. (Based on an original patch by Linus, but significantly modified by tytso.) Tested-by: Eric Wustrow Reported-by: Eric Wustrow Reported-by: Nadia Heninger Reported-by: Zakir Durumeric Reported-by: J. Alex Halderman Signed-off-by: Linus Torvalds Signed-off-by: "Theodore Ts'o" Signed-off-by: Greg Kroah-Hartman

Merge branches 'irq-urgent-for-linus' and 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2012-06-04T18:36:51Z

Pull irq and smpboot updates from Thomas Gleixner: "Just cleanup patches with no functional change and a fix for suspend issues." * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Introduce irq_do_set_affinity() to reduce duplicated code genirq: Add IRQS_PENDING for nested and simple irq * 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: smpboot, idle: Fix comment mismatch over idle_threads_init() smpboot, idle: Optimize calls to smp_processor_id() in idle_threads_init()

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal

2012-06-01T01:47:30Z

Pull second pile of signal handling patches from Al Viro: "This one is just task_work_add() series + remaining prereqs for it. There probably will be another pull request from that tree this cycle - at least for helpers, to get them out of the way for per-arch fixes remaining in the tree." Fix trivial conflict in kernel/irq/manage.c: the merge of Andrew's pile had brought in commit 97fd75b7b8e0 ("kernel/irq/manage.c: use the pr_foo() infrastructure to prefix printks") which changed one of the pr_err() calls that this merge moves around. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: keys: kill task_struct->replacement_session_keyring keys: kill the dummy key_replace_session_keyring() keys: change keyctl_session_to_parent() to use task_work_add() genirq: reimplement exit_irq_thread() hook via task_work_add() task_work_add: generic process-context callbacks avr32: missed _TIF_NOTIFY_RESUME on one of do_notify_resume callers parisc: need to check NOTIFY_RESUME when exiting from syscall move key_repace_session_keyring() into tracehook_notify_resume() TIF_NOTIFY_RESUME is defined on all targets now

kernel/irq/manage.c: use the pr_foo() infrastructure to prefix printks

2012-06-01T00:49:26Z

Use the module-wide pr_fmt() mechanism rather than open-coding "genirq: " everywhere. Cc: Thomas Gleixner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux-2.6

2012-05-24T20:55:24Z

Pull irqdomain changes from Grant Likely: "Minor changes and fixups for irqdomain infrastructure. The most important change adds the ability to remove a registered irqdomain." * tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux-2.6: irqdomain: Document size parameter of irq_domain_add_linear() irqdomain: trivial pr_fmt conversion. irqdomain: Kill off duplicate definitions. irqdomain: Make irq_domain_simple_map() static. irqdomain: Export remaining public API symbols. irqdomain: Support removal of IRQ domains.

genirq: Introduce irq_do_set_affinity() to reduce duplicated code

2012-05-24T20:36:40Z

All invocations of chip->irq_set_affinity() are doing the same return value checks. Let them all use a common function. [ tglx: removed the silly likely while at it ] Signed-off-by: Jiang Liu Cc: Jiang Liu Cc: Keping Chen Link: http://lkml.kernel.org/r/1333120296-13563-3-git-send-email-jiang.liu@huawei.com Signed-off-by: Thomas Gleixner

genirq: Add IRQS_PENDING for nested and simple irq

2012-05-24T20:27:45Z

Every interrupt which is an active wakeup source needs the ability to abort suspend if there is a pending irq. Right now only edge and level irqs can do that. | +---------+ | INTC | +---------+ | GPIO_IRQ +------------+ | gpio-exp | +------------+ | | GPIO0_IRQ GPIO1_IRQ In the above diagram, gpio expander has irq number GPIO_IRQ, it is connected with two sub GPIO pins, GPIO0 and GPIO1. During suspend, we set IRQF_NO_SUSPEND for GPIO_IRQ so that gpio expander driver can handle the sub irq GPIO0_IRQ and GPIO1_IRQ, and these two irqs themselves can further be handled by simple or nested irq in some drivers(typically gpio and mfd driver). If they are used as wakeup sources during suspend, we want them to be able to abort suspend too. Setting IRQS_PENDING flag in handle_nested_irq() and handle_simple_irq() when the irq is disabled allows check_wakeup_irqs() to identify such irqs as source for aborting suspend. Signed-off-by: Ning Jiang Cc: rjw@sisk.pl Link: http://lkml.kernel.org/r/CAH3Oq6T905%2B3fkF43NAMMFvJvq7dsk_so6T2vQ8ZJrA5xiU3YA@mail.gmail.com Signed-off-by: Thomas Gleixner

genirq: reimplement exit_irq_thread() hook via task_work_add()

2012-05-24T02:11:12Z

exit_irq_thread() and task->irq_thread are needed to handle the unexpected (and unlikely) exit of irq-thread. We can use task_work instead and make this all private to kernel/irq/manage.c, cleanup plus micro-optimization. 1. rename exit_irq_thread() to irq_thread_dtor(), make it static, and move it up before irq_thread(). 2. change irq_thread() to do task_work_add(irq_thread_dtor) at the start and task_work_cancel() before return. tracehook_notify_resume() can never play with kthreads, only do_exit()->exit_task_work() can call the callback and this is what we want. 3. remove task_struct->irq_thread and the special hook in do_exit(). Signed-off-by: Oleg Nesterov Reviewed-by: Thomas Gleixner Cc: David Howells Cc: Richard Kuo Cc: Linus Torvalds Cc: Alexander Gordeev Cc: Chris Zankel Cc: David Smith Cc: "Frank Ch. Eigler" Cc: Geert Uytterhoeven Cc: Larry Woodman Cc: Peter Zijlstra Cc: Tejun Heo Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Al Viro

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml

2012-05-23T16:01:41Z

Pull UML updates from Richard Weinberger: "Most changes are bug fixes and cleanups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: missing checks of __put_user()/__get_user() return values um: stub_rt_sigsuspend isn't needed these days anymore um/x86: merge (and trim) 32- and 64-bit variants of ptrace.h irq: Remove irq_chip->release() um: Remove CONFIG_IRQ_RELEASE_METHOD um: Remove usage of irq_chip->release() um: Implement um_free_irq() um: Fix __swp_type() um: Implement a custom pte_same() function um: Add BUG() to do_ops()'s error path um: Remove unused variables um: bury unused _TIF_RESTORE_SIGMASK um: wrong sigmask saved in case of multiple sigframes um: add TIF_NOTIFY_RESUME um: ->restart_block.fn needs to be reset on sigreturn