linux/include, branch v2.6.38.1

HID: Do not create input devices for feature reports

2011-03-23T20:04:09Z

commit f635bd11c8d332d917fb9a4cad3071b2357d5b2a upstream. When the multi input quirk is set, there is a new input device created for every feature report. Since the idea is to present features per hid device, not per input device, revert back to the original report loop and change the feature_mapping() callback to not take the input device as argument. Signed-off-by: Henrik Rydberg Tested-by: Benjamin Tissoires Signed-off-by: Jiri Kosina Signed-off-by: Greg Kroah-Hartman

USB: Add support for SuperSpeed isoc endpoints

2011-03-23T20:03:52Z

commit 500132a0f26ad7d9916102193cbc6c1b1becb373 upstream. Use the Mult and bMaxBurst values from the endpoint companion descriptor to calculate the max length of an isoc transfer. Add USB_SS_MULT macro to access Mult field of bmAttributes, at Sarah's suggestion. This patch should be queued for the 2.6.36 and 2.6.37 stable trees, since those were the first kernels to have isochronous support for SuperSpeed devices. Signed-off-by: Paul Zimmerman Signed-off-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman

USB: move usbcore away from hcd->state

2011-03-23T20:03:51Z

commit 9b37596a2e860404503a3f2a6513db60c296bfdc upstream. The hcd->state variable is a disaster. It's not clearly owned by either usbcore or the host controller drivers, and they both change it from time to time, potentially stepping on each other's toes. It's not protected by any locks. And there's no mechanism to prevent it from going through an invalid transition. This patch (as1451) takes a first step toward fixing these problems. As it turns out, usbcore uses hcd->state for essentially only two things: checking whether the controller's root hub is running and checking whether the controller has died. Therefore the patch adds two new atomic bitflags to the hcd structure, to store these pieces of information. The new flags are used only by usbcore, and a private spinlock prevents invalid combinations (a dead controller's root hub cannot be running). The patch does not change the places where usbcore sets hcd->state, since HCDs may depend on them. Furthermore, there is one place in usb_hcd_irq() where usbcore still must use hcd->state: An HCD's interrupt handler can implicitly indicate that the controller died by setting hcd->state to HC_STATE_HALT. Nevertheless, the new code is a big improvement over the current code. The patch makes one other change. The hcd_bus_suspend() and hcd_bus_resume() routines now check first whether the host controller has died; if it has then they return immediately without calling the HCD's bus_suspend or bus_resume methods. This fixes the major problem reported in Bugzilla #29902: The system fails to suspend after a host controller dies during system resume. Signed-off-by: Alan Stern Tested-by: Alex Terekhov Signed-off-by: Greg Kroah-Hartman

USB: serial drivers need to use larger bulk-in buffers

2011-03-23T20:03:46Z

commit 969e3033ae7733a0af8f7742ca74cd16c0857e71 upstream. When a driver doesn't know how much data a device is going to send, the buffer size should be at least as big as the endpoint's maxpacket value. The serial drivers don't follow this rule; many of them request only 256-byte bulk-in buffers. As a result, they suffer overflow errors if a high-speed device wants to send a lot of data, because high-speed bulk endpoints are required to have a maxpacket size of 512. This patch (as1450) fixes the problem by using the driver's bulk_in_size value as a minimum, always allocating buffers no smaller than the endpoint's maxpacket size. Signed-off-by: Alan Stern Tested-by: Flynn Marquardt Signed-off-by: Greg Kroah-Hartman

ftrace: Fix memory leak with function graph and cpu hotplug

2011-03-23T20:03:32Z

commit 868baf07b1a259f5f3803c1dc2777b6c358f83cf upstream. When the fuction graph tracer starts, it needs to make a special stack for each task to save the real return values of the tasks. All running tasks have this stack created, as well as any new tasks. On CPU hot plug, the new idle task will allocate a stack as well when init_idle() is called. The problem is that cpu hotplug does not create a new idle_task. Instead it uses the idle task that existed when the cpu went down. ftrace_graph_init_task() will add a new ret_stack to the task that is given to it. Because a clone will make the task have a stack of its parent it does not check if the task's ret_stack is already NULL or not. When the CPU hotplug code starts a CPU up again, it will allocate a new stack even though one already existed for it. The solution is to treat the idle_task specially. In fact, the function_graph code already does, just not at init_idle(). Instead of using the ftrace_graph_init_task() for the idle task, which that function expects the task to be a clone, have a separate ftrace_graph_init_idle_task(). Also, we will create a per_cpu ret_stack that is used by the idle task. When we call ftrace_graph_init_idle_task() it will check if the idle task's ret_stack is NULL, if it is, then it will assign it the per_cpu ret_stack. Reported-by: Benjamin Herrenschmidt Suggested-by: Peter Zijlstra Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman

Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6

2011-03-14T18:19:50Z

* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: NFS: NFSROOT should default to "proto=udp" nfs4: remove duplicated #include NFSv4: nfs4_state_mark_reclaim_nograce() should be static NFSv4: Fix the setlk error handler NFSv4.1: Fix the handling of the SEQUENCE status bits NFSv4/4.1: Fix nfs4_schedule_state_recovery abuses NFSv4.1 reclaim complete must wait for completion NFSv4: remove duplicate clientid in struct nfs_client NFSv4.1: Retry CREATE_SESSION on NFS4ERR_DELAY sunrpc: Propagate errors from xs_bind() through xs_create_sock() (try3-resend) Fix nfs_compat_user_ino64 so it doesn't cause problems if bit 31 or 63 are set in fileid nfs: fix compilation warning nfs: add kmalloc return value check in decode_and_add_ds SUNRPC: Remove resource leak in svc_rdma_send_error() nfs: close NFSv4 COMMIT vs. CLOSE race SUNRPC: Close a race in __rpc_wait_for_completion_task()

Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6

2011-03-13T23:00:28Z

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] target: Fix t_transport_aborted handling in LUN_RESET + active I/O shutdown

NFSv4/4.1: Fix nfs4_schedule_state_recovery abuses

2011-03-11T20:18:22Z

nfs4_schedule_state_recovery() should only be used when we need to force the state manager to check the lease. If we just want to start the state manager in order to handle a state recovery situation, we should be using nfs4_schedule_state_manager(). This patch fixes the abuses of nfs4_schedule_state_recovery() by replacing its use with a set of helper functions that do the right thing. Signed-off-by: Trond Myklebust

NFSv4: remove duplicate clientid in struct nfs_client

2011-03-10T20:05:00Z

Signed-off-by: Andy Adamson Signed-off-by: Trond Myklebust

SUNRPC: Close a race in __rpc_wait_for_completion_task()

2011-03-10T20:04:52Z

Although they run as rpciod background tasks, under normal operation (i.e. no SIGKILL), functions like nfs_sillyrename(), nfs4_proc_unlck() and nfs4_do_close() want to be fully synchronous. This means that when we exit, we want all references to the rpc_task to be gone, and we want any dentry references etc. held by that task to be released. For this reason these functions call __rpc_wait_for_completion_task(), followed by rpc_put_task() in the expectation that the latter will be releasing the last reference to the rpc_task, and thus ensuring that the callback_ops->rpc_release() has been called synchronously. This patch fixes a race which exists due to the fact that rpciod calls rpc_complete_task() (in order to wake up the callers of __rpc_wait_for_completion_task()) and then subsequently calls rpc_put_task() without ensuring that these two steps are done atomically. In order to avoid adding new spin locks, the patch uses the existing waitqueue spin lock to order the rpc_task reference count releases between the waiting process and rpciod. The common case where nobody is waiting for completion is optimised for by checking if the RPC_TASK_ASYNC flag is cleared and/or if the rpc_task reference count is 1: in those cases we drop trying to grab the spin lock, and immediately free up the rpc_task. Those few processes that need to put the rpc_task from inside an asynchronous context and that do not care about ordering are given a new helper: rpc_put_task_async(). Signed-off-by: Trond Myklebust