linux/include/video, branch v3.10.10

Merge branch 'fbdev-3.10-fixes' of git://gitorious.org/linux-omap-dss2/linux into linux-fbdev/for-3.10-fixes

2013-05-29T09:00:34Z

Pull Tomi fixes for ps3fb and omap2 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD

OMAPDSS: Fix crash with DT boot

2013-05-23T09:54:21Z

When booting with DT, there's a crash when omapfb is probed. This is caused by the fact that omapdss+DT is not yet supported, and thus omapdss is not probed at all. On the other hand, omapfb is always probed. When omapfb tries to use omapdss, there's a NULL pointer dereference crash. The same error should most likely happen with omapdrm and omap_vout also. To fix this, add an "initialized" state to omapdss. When omapdss has been probed, it's marked as initialized. omapfb, omapdrm and omap_vout check this state when they are probed to see that omapdss is actually there. Signed-off-by: Tomi Valkeinen Tested-by: Peter Ujfalusi

Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2013-05-04T19:31:18Z

Pull ARM SoC driver changes from Olof Johansson: "This is a rather large set of patches for device drivers that for one reason or another the subsystem maintainer preferred to get merged through the arm-soc tree. There are both new drivers as well as existing drivers that are getting converted from platform-specific code into standalone drivers using the appropriate subsystem specific interfaces. In particular, we can now have pinctrl, clk, clksource and irqchip drivers in one file per driver, without the need to call into platform specific interface, or to get called from platform specific code, as long as all information about the hardware is provided through a device tree. Most of the drivers we touch this time are for clocksource. Since now most of them are part of drivers/clocksource, I expect that we won't have to touch these again from arm-soc and can let the clocksource maintainers take care of these in the future. Another larger part of this series is specific to the exynos platform, which is seeing some significant effort in upstreaming and modernization of its device drivers this time around, which unfortunately is also the cause for the churn and a lot of the merge conflicts. There is one new subsystem that gets merged as part of this series: the reset controller interface, which is a very simple interface for taking devices on the SoC out of reset or back into reset. Patches to use this interface on i.MX follow later in this merge window, and we are going to have other platforms (at least tegra and sirf) get converted in 3.11. This will let us get rid of platform specific callbacks in a number of platform independent device drivers." * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (256 commits) irqchip: s3c24xx: add missing __init annotations ARM: dts: Disable the RTC by default on exynos5 clk: exynos5250: Fix parent clock for sclk_mmc{0,1,2,3} ARM: exynos: restore mach/regs-clock.h for exynos5 clocksource: exynos_mct: fix build error on non-DT pinctrl: vt8500: wmt: Fix checking return value of pinctrl_register() irqchip: vt8500: Convert arch-vt8500 to new irqchip infrastructure reset: NULL deref on allocation failure reset: Add reset controller API dt: describe base reset signal binding ARM: EXYNOS: Add arm-pmu DT binding for exynos421x ARM: EXYNOS: Add arm-pmu DT binding for exynos5250 ARM: EXYNOS: Enable PMUs for exynos4 irqchip: exynos-combiner: Correct combined IRQs for exynos4 irqchip: exynos-combiner: Add set_irq_affinity function for combiner_irq ARM: EXYNOS: fix compilation error introduced due to common clock migration clk: exynos5250: Fix divider values for sclk_mmc{0,1,2,3} clk: exynos4: export clocks required for fimc-is clk: samsung: Fix compilation error clk: tegra: fix enum tegra114_clk to match binding ...

Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux

2013-05-03T02:40:34Z

Pull drm updates from Dave Airlie: "This is the main drm pull request for 3.10. Wierd bits: - OMAP drm changes required OMAP dss changes, in drivers/video, so I took them in here. - one more fbcon fix for font handover - VT switch avoidance in pm code - scatterlist helpers for gpu drivers - have acks from akpm Highlights: - qxl kms driver - driver for the spice qxl virtual GPU Nouveau: - fermi/kepler VRAM compression - GK110/nvf0 modesetting support. Tegra: - host1x core merged with 2D engine support i915: - vt switchless resume - more valleyview support - vblank fixes - modesetting pipe config rework radeon: - UVD engine support - SI chip tiling support - GPU registers initialisation from golden values. exynos: - device tree changes - fimc block support Otherwise: - bunches of fixes all over the place." * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (513 commits) qxl: update to new idr interfaces. drm/nouveau: fix build with nv50->nvc0 drm/radeon: fix handling of v6 power tables drm/radeon: clarify family checks in pm table parsing drm/radeon: consolidate UVD clock programming drm/radeon: fix UPLL_REF_DIV_MASK definition radeon: add bo tracking debugfs drm/radeon: add new richland pci ids drm/radeon: add some new SI PCI ids drm/radeon: fix scratch reg handling for UVD fence drm/radeon: allocate SA bo in the requested domain drm/radeon: fix possible segfault when parsing pm tables drm/radeon: fix endian bugs in atom_allocate_fb_scratch() OMAPDSS: TFP410: return EPROBE_DEFER if the i2c adapter not found OMAPDSS: VENC: Add error handling for venc_probe_pdata OMAPDSS: HDMI: Add error handling for hdmi_probe_pdata OMAPDSS: RFBI: Add error handling for rfbi_probe_pdata OMAPDSS: DSI: Add error handling for dsi_probe_pdata OMAPDSS: SDI: Add error handling for sdi_probe_pdata OMAPDSS: DPI: Add error handling for dpi_probe_pdata ...

drivers/video/backlight/platform_lcd.c: introduce probe callback

2013-04-30T01:28:18Z

Platform LCD devices may need to do some device-specific initialization before they can be used (regulator or GPIO setup, for example), but currently the driver does not support any way of doing this. This patch adds a probe() callback to plat_lcd_data which platform LCD devices can set to indicate that device-specific initialization is needed. Signed-off-by: Andrew Bresticker Cc: Richard Purdie Cc: Florian Tobias Schandinat Reviewed-by: Doug Anderson Acked-by: Jingoo Han Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

OMAPDSS: Merge omapdss topic branches

2013-04-15T09:01:02Z

fbdev: Merge fbdev topic branches

2013-04-15T09:00:38Z

Merge branches '3.10/auo-k190x', '3.10/misc', '3.10/videomode' and '3.10/vt8500' into for-next

AUO-K190x: Add resolutions for portrait displays

2013-04-04T10:08:07Z

The controller also contains support for displays in a portrait orientation and it seems devices which such displays really reached the market - Pandigital Novell seems to be one example. Signed-off-by: Heiko Stübner Signed-off-by: Tomi Valkeinen

AUO-K190x: add framebuffer rotation support

2013-04-04T10:08:07Z

Change the driver to use the framebuffer rotation functions to be able to change the rotation at runtime. This also removes the setting of the rotation via the platform data. Signed-off-by: Heiko Stübner Signed-off-by: Tomi Valkeinen

OMAPDSS: n8x0: remove platform backlight calls

2013-04-03T12:19:45Z

The n8x0 panel contains support to call platform backlight functions. These are not used by any board, and can be removed. Signed-off-by: Tomi Valkeinen Signed-off-by: Archit Taneja