linux/include/trace/events, branch v3.16

Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2014-06-13T02:42:15Z

Pull more scheduler updates from Ingo Molnar: "Second round of scheduler changes: - try-to-wakeup and IPI reduction speedups, from Andy Lutomirski - continued power scheduling cleanups and refactorings, from Nicolas Pitre - misc fixes and enhancements" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/deadline: Delete extraneous extern for to_ratio() sched/idle: Optimize try-to-wake-up IPI sched/idle: Simplify wake_up_idle_cpu() sched/idle: Clear polling before descheduling the idle thread sched, trace: Add a tracepoint for IPI-less remote wakeups cpuidle: Set polling in poll_idle sched: Remove redundant assignment to "rt_rq" in update_curr_rt(...) sched: Rename capacity related flags sched: Final power vs. capacity cleanups sched: Remove remaining dubious usage of "power" sched: Let 'struct sched_group_power' care about CPU capacity sched/fair: Disambiguate existing/remaining "capacity" usage sched/fair: Change "has_capacity" to "has_free_capacity" sched/fair: Remove "power" from 'struct numa_stats' sched: Fix signedness bug in yield_to() sched/fair: Use time_after() in record_wakee() sched/balancing: Reduce the rate of needless idle load balancing sched/fair: Fix unlocked reads of some cfs_b->quota/period

Merge tag 'pm+acpi-3.16-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2014-06-12T20:14:19Z

Pull more ACPI and power management updates from Rafael Wysocki: "These are fixups on top of the previous PM+ACPI pull request, regression fixes (ACPI hotplug, cpufreq ppc-corenet), other bug fixes (ACPI reset, cpufreq), new PM trace points for system suspend profiling and a copyright notice update. Specifics: - I didn't remember correctly that the Hans de Goede's ACPI video patches actually didn't flip the video.use_native_backlight default, although we had discussed that and decided to do that. Since I said we would do that in the previous PM+ACPI pull request, make that change for real now. - ACPI bus check notifications for PCI host bridges don't cause the bus below the host bridge to be checked for changes as they should because of a mistake in the ACPI-based PCI hotplug (ACPIPHP) subsystem that forgets to add hotplug contexts to PCI host bridge ACPI device objects. Create hotplug contexts for PCI host bridges too as appropriate. - Revert recent cpufreq commit related to the big.LITTLE cpufreq driver that breaks arm64 builds. - Fix for a regression in the ppc-corenet cpufreq driver introduced during the 3.15 cycle and causing the driver to use the remainder from do_div instead of the quotient. From Ed Swarthout. - Resets triggered by panic activate a BUG_ON() in vmalloc.c on systems where the ACPI reset register is located in memory address space. Fix from Randy Wright. - Fix for a problem with cpufreq governors that decisions made by them may be suboptimal due to the fact that deferrable timers are used by them for CPU load sampling. From Srivatsa S Bhat. - Fix for a problem with the Tegra cpufreq driver where the CPU frequency is temporarily switched to a "stable" level that is different from both the initial and target frequencies during transitions which causes udelay() to expire earlier than it should sometimes. From Viresh Kumar. - New trace points and rework of some existing trace points for system suspend/resume profiling from Todd Brandt. - Assorted cpufreq fixes and cleanups from Stratos Karafotis and Viresh Kumar. - Copyright notice update for suspend-and-cpuhotplug.txt from Srivatsa S Bhat" * tag 'pm+acpi-3.16-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / hotplug / PCI: Add hotplug contexts to PCI host bridges PM / sleep: trace events for device PM callbacks cpufreq: cpufreq-cpu0: remove dependency on THERMAL and REGULATOR cpufreq: tegra: update comment for clarity cpufreq: intel_pstate: Remove duplicate CPU ID check cpufreq: Mark CPU0 driver with CPUFREQ_NEED_INITIAL_FREQ_CHECK flag PM / Documentation: Update copyright in suspend-and-cpuhotplug.txt cpufreq: governor: remove copy_prev_load from 'struct cpu_dbs_common_info' cpufreq: governor: Be friendly towards latency-sensitive bursty workloads PM / sleep: trace events for suspend/resume cpufreq: ppc-corenet-cpu-freq: do_div use quotient Revert "cpufreq: Enable big.LITTLE cpufreq driver on arm64" cpufreq: Tegra: implement intermediate frequency callbacks cpufreq: add support for intermediate (stable) frequencies ACPI / video: Change the default for video.use_native_backlight to 1 ACPI: Fix bug when ACPI reset register is implemented in system memory

Merge branch 'pm-sleep'

2014-06-12T11:43:08Z

* pm-sleep: PM / sleep: trace events for device PM callbacks PM / sleep: trace events for suspend/resume

PM / sleep: trace events for device PM callbacks

2014-06-11T00:16:48Z

Adds two trace events which supply the same info that initcall_debug provides, but via ftrace instead of dmesg. The existing initcall_debug calls require the pm_print_times_enabled var to be set (either via sysfs or via the kernel cmd line). The new trace events provide all the same info as the initcall_debug prints but with less overhead, and also with coverage of device prepare and complete device callbacks. These events replace the device_pm_report_time event (which has been removed). device_pm_callback_start is called first and provides the device and callback info. device_pm_callback_end is called after with the device name and error info. The time and pid are gathered from the trace data headers. Signed-off-by: Todd Brandt Signed-off-by: Rafael J. Wysocki

Merge tag 'for-f2fs-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs

2014-06-10T02:11:44Z

Pull f2fs updates from Jaegeuk Kim: "In this round, there is no special interesting feature, but we've investigated a couple of tuning points with respect to the I/O flow. Several major bug fixes and a bunch of clean-ups also have been made. This patch-set includes the following major enhancement patches: - enhance wait_on_page_writeback - support SEEK_DATA and SEEK_HOLE - enhance readahead flows - enhance IO flushes - support fiemap - add some tracepoints The other bug fixes are as follows: - fix to support a large volume > 2TB correctly - recovery bug fix wrt fallocated space - fix recursive lock on xattr operations - fix some cases on the remount flow And, there are a bunch of cleanups" * tag 'for-f2fs-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (52 commits) f2fs: support f2fs_fiemap f2fs: avoid not to call remove_dirty_inode f2fs: recover fallocated space f2fs: fix to recover data written by dio f2fs: large volume support f2fs: avoid crash when trace f2fs_submit_page_mbio event in ra_sum_pages f2fs: avoid overflow when large directory feathure is enabled f2fs: fix recursive lock by f2fs_setxattr MAINTAINERS: add a co-maintainer from samsung for F2FS MAINTAINERS: change the email address for f2fs f2fs: use inode_init_owner() to simplify codes f2fs: avoid to use slab memory in f2fs_issue_flush for efficiency f2fs: add a tracepoint for f2fs_read_data_page f2fs: add a tracepoint for f2fs_write_{meta,node,data}_pages f2fs: add a tracepoint for f2fs_write_{meta,node,data}_page f2fs: add a tracepoint for f2fs_write_end f2fs: add a tracepoint for f2fs_write_begin f2fs: fix checkpatch warning f2fs: deactivate inode page if the inode is evicted f2fs: decrease the lock granularity during write_begin ...

Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

2014-06-08T20:03:35Z

Pull ext4 updates from Ted Ts'o: "Clean ups and miscellaneous bug fixes, in particular for the new collapse_range and zero_range fallocate functions. In addition, improve the scalability of adding and remove inodes from the orphan list" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (25 commits) ext4: handle symlink properly with inline_data ext4: fix wrong assert in ext4_mb_normalize_request() ext4: fix zeroing of page during writeback ext4: remove unused local variable "stored" from ext4_readdir(...) ext4: fix ZERO_RANGE test failure in data journalling ext4: reduce contention on s_orphan_lock ext4: use sbi in ext4_orphan_{add|del}() ext4: use EXT_MAX_BLOCKS in ext4_es_can_be_merged() ext4: add missing BUFFER_TRACE before ext4_journal_get_write_access ext4: remove unnecessary double parentheses ext4: do not destroy ext4_groupinfo_caches if ext4_mb_init() fails ext4: make local functions static ext4: fix block bitmap validation when bigalloc, ^flex_bg ext4: fix block bitmap initialization under sparse_super2 ext4: find the group descriptors on a 1k-block bigalloc,meta_bg filesystem ext4: avoid unneeded lookup when xattr name is invalid ext4: fix data integrity sync in ordered mode ext4: remove obsoleted check ext4: add a new spinlock i_raw_lock to protect the ext4's raw inode ext4: fix locking for O_APPEND writes ...

PM / sleep: trace events for suspend/resume

2014-06-06T22:18:07Z

Adds trace events that give finer resolution into suspend/resume. These events are graphed in the timelines generated by the analyze_suspend.py script. They represent large areas of time consumed that are typical to suspend and resume. The event is triggered by calling the function "trace_suspend_resume" with three arguments: a string (the name of the event to be displayed in the timeline), an integer (case specific number, such as the power state or cpu number), and a boolean (where true is used to denote the start of the timeline event, and false to denote the end). The suspend_resume trace event reproduces the data that the machine_suspend trace event did, so the latter has been removed. Signed-off-by: Todd Brandt Acked-by: Steven Rostedt Signed-off-by: Rafael J. Wysocki

sched, trace: Add a tracepoint for IPI-less remote wakeups

2014-06-05T10:09:50Z

Remote wakeups of polling CPUs are a valuable performance improvement; add a tracepoint to make it much easier to verify that they're working. Signed-off-by: Andy Lutomirski Signed-off-by: Peter Zijlstra Cc: nicolas.pitre@linaro.org Cc: daniel.lezcano@linaro.org Cc: umgwanakikbuti@gmail.com Cc: David Ahern Cc: Frederic Weisbecker Cc: Linus Torvalds Cc: Mel Gorman Cc: Oleg Nesterov Cc: Steven Rostedt Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/16205aee116772aa686814f9b13bccb562108047.1401902905.git.luto@amacapital.net Signed-off-by: Ingo Molnar

mm/compaction: do not count migratepages when unnecessary

2014-06-04T23:54:07Z

During compaction, update_nr_listpages() has been used to count remaining non-migrated and free pages after a call to migrage_pages(). The freepages counting has become unneccessary, and it turns out that migratepages counting is also unnecessary in most cases. The only situation when it's needed to count cc->migratepages is when migrate_pages() returns with a negative error code. Otherwise, the non-negative return value is the number of pages that were not migrated, which is exactly the count of remaining pages in the cc->migratepages list. Furthermore, any non-zero count is only interesting for the tracepoint of mm_compaction_migratepages events, because after that all remaining unmigrated pages are put back and their count is set to 0. This patch therefore removes update_nr_listpages() completely, and changes the tracepoint definition so that the manual counting is done only when the tracepoint is enabled, and only when migrate_pages() returns a negative error code. Furthermore, migrate_pages() and the tracepoints won't be called when there's nothing to migrate. This potentially avoids some wasted cycles and reduces the volume of uninteresting mm_compaction_migratepages events where "nr_migrated=0 nr_failed=0". In the stress-highalloc mmtest, this was about 75% of the events. The mm_compaction_isolate_migratepages event is better for determining that nothing was isolated for migration, and this one was just duplicating the info. Signed-off-by: Vlastimil Babka Reviewed-by: Naoya Horiguchi Cc: Minchan Kim Cc: Mel Gorman Cc: Joonsoo Kim Cc: Bartlomiej Zolnierkiewicz Acked-by: Michal Nazarewicz Cc: Christoph Lameter Cc: Rik van Riel Acked-by: David Rientjes Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

mm: shrinker: add nid to tracepoint output

2014-06-04T23:54:04Z

Now that we are doing NUMA-aware shrinking, and can have shrinkers running in parallel, or working on individual nodes, it seems like we should also be sticking the node in the output. Signed-off-by: Dave Hansen Acked-by: Dave Chinner Cc: Konstantin Khlebnikov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds