linux/include/trace/events/writeback.h, branch v3.12.14

writeback: replace custom worker pool implementation with unbound workqueue

2013-04-02T02:08:06Z

Writeback implements its own worker pool - each bdi can be associated with a worker thread which is created and destroyed dynamically. The worker thread for the default bdi is always present and serves as the "forker" thread which forks off worker threads for other bdis. there's no reason for writeback to implement its own worker pool when using unbound workqueue instead is much simpler and more efficient. This patch replaces custom worker pool implementation in writeback with an unbound workqueue. The conversion isn't too complicated but the followings are worth mentioning. * bdi_writeback->last_active, task and wakeup_timer are removed. delayed_work ->dwork is added instead. Explicit timer handling is no longer necessary. Everything works by either queueing / modding / flushing / canceling the delayed_work item. * bdi_writeback_thread() becomes bdi_writeback_workfn() which runs off bdi_writeback->dwork. On each execution, it processes bdi->work_list and reschedules itself if there are more things to do. The function also handles low-mem condition, which used to be handled by the forker thread. If the function is running off a rescuer thread, it only writes out limited number of pages so that the rescuer can serve other bdis too. This preserves the flusher creation failure behavior of the forker thread. * INIT_LIST_HEAD(&bdi->bdi_list) is used to tell bdi_writeback_workfn() about on-going bdi unregistration so that it always drains work_list even if it's running off the rescuer. Note that the original code was broken in this regard. Under memory pressure, a bdi could finish unregistration with non-empty work_list. * The default bdi is no longer special. It now is treated the same as any other bdi and bdi_cap_flush_forker() is removed. * BDI_pending is no longer used. Removed. * Some tracepoints become non-applicable. The following TPs are removed - writeback_nothread, writeback_wake_thread, writeback_wake_forker_thread, writeback_thread_start, writeback_thread_stop. Everything, including devices coming and going away and rescuer operation under simulated memory pressure, seems to work fine in my test setup. Signed-off-by: Tejun Heo Reviewed-by: Jan Kara Cc: Jens Axboe Cc: Fengguang Wu Cc: Jeff Moyer

writeback: add more tracepoints

2013-01-14T14:00:36Z

Add tracepoints for page dirtying, writeback_single_inode start, inode dirtying and writeback. For the latter two inode events, a pair of events are defined to denote start and end of the operations (the starting one has _start suffix and the one w/o suffix happens after the operation is complete). These inode ops are FS specific and can be non-trivial and having enclosing tracepoints is useful for external tracers. This is part of tracepoint additions to improve visiblity into dirtying / writeback operations for io tracer and userland. v2: writeback_dirty_inode[_start] TPs may be called for files on pseudo FSes w/ unregistered bdi. Check whether bdi->dev is %NULL before dereferencing. v3: buffer dirtying moved to a block TP. Signed-off-by: Tejun Heo Reviewed-by: Jan Kara Signed-off-by: Jens Axboe

writeback: Move requeueing when I_SYNC set to writeback_sb_inodes()

2012-05-06T05:43:38Z

When writeback_single_inode() is called on inode which has I_SYNC already set while doing WB_SYNC_NONE, inode is moved to b_more_io list. However this makes sense only if the caller is flusher thread. For other callers of writeback_single_inode() it doesn't really make sense and may be even wrong - flusher thread may be doing WB_SYNC_ALL writeback in parallel. So we move requeueing from writeback_single_inode() to writeback_sb_inodes(). Reviewed-by: Christoph Hellwig Signed-off-by: Jan Kara Signed-off-by: Fengguang Wu

Merge tag 'device-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux

2012-03-24T17:41:37Z

Pull avoidance patches from Paul Gortmaker: "Nearly every subsystem has some kind of header with a proto like: void foo(struct device *dev); and yet there is no reason for most of these guys to care about the sub fields within the device struct. This allows us to significantly reduce the scope of headers including headers. For this instance, a reduction of about 40% is achieved by replacing the include with the simple fact that the device is some kind of a struct. Unlike the much larger module.h cleanup, this one is simply two commits. One to fix the implicit users, and then one to delete the device.h includes from the linux/include/ dir wherever possible." * tag 'device-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: device.h: audit and cleanup users in main include dir device.h: cleanup users outside of linux/include (C files)

device.h: audit and cleanup users in main include dir

2012-03-16T14:38:24Z

The header includes a lot of stuff, and it in turn gets a lot of use just for the basic "struct device" which appears so often. Clean up the users as follows: 1) For those headers only needing "struct device" as a pointer in fcn args, replace the include with exactly that. 2) For headers not really using anything from device.h, simply delete the include altogether. 3) For headers relying on getting device.h implicitly before being included themselves, now explicitly include device.h 4) For files in which doing #1 or #2 uncovers an implicit dependency on some other header, fix by explicitly adding the required header(s). Any C files that were implicitly relying on device.h to be present have already been dealt with in advance. Total removals from #1 and #2: 51. Total additions coming from #3: 9. Total other implicit dependencies from #4: 7. As of 3.3-rc1, there were 110, so a net removal of 42 gives about a 38% reduction in device.h presence in include/* Signed-off-by: Paul Gortmaker

writeback: fix dereferencing NULL bdi->dev on trace_writeback_queue

2012-02-06T03:17:25Z

When a SD card is hot removed without umount, del_gendisk() will call bdi_unregister() without destroying/freeing it. This leaves the bdi in the bdi->dev = NULL, bdi->wb.task = NULL, bdi->bdi_list removed state. When sync(2) gets the bdi before bdi_unregister() and calls bdi_queue_work() after the unregister, trace_writeback_queue will be dereferencing the NULL bdi->dev. Fix it with a simple test for NULL. LKML-reference: http://lkml.org/lkml/2012/1/18/346 Cc: stable@kernel.org Reported-by: Rabin Vincent Tested-by: Namjae Jeon Signed-off-by: Wu Fengguang

writeback: fix NULL bdi->dev in trace writeback_single_inode

2012-02-01T08:53:40Z

bdi_prune_sb() resets sb->s_bdi to default_backing_dev_info when the tearing down the original bdi. Fix trace_writeback_single_inode to use sb->s_bdi=default_backing_dev_info rather than bdi->dev=NULL for a teared down bdi. Cc: Reported-by: Rabin Vincent Tested-by: Rabin Vincent Signed-off-by: Wu Fengguang

writeback: dirty ratelimit - think time compensation

2011-12-18T06:20:27Z

Compensate the task's think time when computing the final pause time, so that ->dirty_ratelimit can be executed accurately. think time := time spend outside of balance_dirty_pages() In the rare case that the task slept longer than the 200ms period time (result in negative pause time), the sleep time will be compensated in the following periods, too, if it's less than 1 second. Accumulated errors are carefully avoided as long as the max pause area is not hitted. Pseudo code: period = pages_dirtied / task_ratelimit; think = jiffies - dirty_paused_when; pause = period - think; 1) normal case: period > think pause = period - think dirty_paused_when = jiffies + pause nr_dirtied = 0 period time |===============================>| think time pause time |===============>|==============>| ------|----------------|---------------|------------------------ dirty_paused_when jiffies 2) no pause case: period <= think don't pause; reduce future pause time by: dirty_paused_when += period nr_dirtied = 0 period time |===============================>| think time |===================================================>| ------|--------------------------------+-------------------|---- dirty_paused_when jiffies Acked-by: Jan Kara Acked-by: Peter Zijlstra Signed-off-by: Wu Fengguang

writeback: show writeback reason with __print_symbolic

2011-12-18T06:20:17Z

This makes the binary trace understandable by trace-cmd. CC: Dave Chinner CC: Curt Wohlgemuth CC: Steven Rostedt Signed-off-by: Wu Fengguang

writeback: Add a 'reason' to wb_writeback_work

2011-10-30T16:33:36Z

This creates a new 'reason' field in a wb_writeback_work structure, which unambiguously identifies who initiates writeback activity. A 'wb_reason' enumeration has been added to writeback.h, to enumerate the possible reasons. The 'writeback_work_class' and tracepoint event class and 'writeback_queue_io' tracepoints are updated to include the symbolic 'reason' in all trace events. And the 'writeback_inodes_sbXXX' family of routines has had a wb_stats parameter added to them, so callers can specify why writeback is being started. Acked-by: Jan Kara Signed-off-by: Curt Wohlgemuth Signed-off-by: Wu Fengguang