linux/include/target/iscsi, branch v3.16

Target/iscsi: Fix sendtargets response pdu for iser transport

2014-06-11T18:52:39Z

In case the transport is iser we should not include the iscsi target info in the sendtargets text response pdu. This causes sendtargets response to include the target info twice. Modify iscsit_build_sendtargets_response to filter transport types that don't match. Signed-off-by: Sagi Grimberg Reported-by: Slava Shwartsman Cc: stable@vger.kernel.org # 3.11+ Signed-off-by: Nicholas Bellinger

target: Pass in transport supported PI at session initialization

2014-04-07T08:48:54Z

In order to support local WRITE_INSERT + READ_STRIP operations for non PI enabled fabrics, the fabric driver needs to be able signal what protection offload operations are supported. This is done at session initialization time so the modes can be signaled by individual se_wwn + se_portal_group endpoints, as well as optionally across different transports on the same endpoint. For iser-target, set TARGET_PROT_ALL if the underlying ib_device has already signaled PI offload support, and allow this to be exposed via a new iscsit_transport->iscsit_get_sup_prot_ops() callback. For loopback, set TARGET_PROT_ALL to signal SCSI initiator mode operation. For all other drivers, set TARGET_PROT_NORMAL to disable fabric level PI. Cc: Martin K. Petersen Cc: Sagi Grimberg Cc: Or Gerlitz Cc: Quinn Tran Cc: Giridhar Malavali Signed-off-by: Nicholas Bellinger

target: Add TFO->abort_task for aborted task resources release

2014-04-07T08:48:51Z

Now that TASK_ABORTED status is not generated for all cases by TMR ABORT_TASK + LUN_RESET, a new TFO->abort_task() caller is necessary in order to give fabric drivers a chance to unmap hardware / software resources before the se_cmd descriptor is released via the normal TFO->release_cmd() codepath. This patch adds TFO->aborted_task() in core_tmr_abort_task() in place of the original transport_send_task_abort(), and also updates all fabric drivers to implement this caller. The fabric drivers that include changes to perform cleanup via ->aborted_task() are: - iscsi-target - iser-target - srpt - tcm_qla2xxx The fabric drivers that currently set ->aborted_task() to NOPs are: - loopback - tcm_fc - usb-gadget - sbp-target - vhost-scsi For the latter five, there appears to be no additional cleanup required before invoking TFO->release_cmd() to release the se_cmd descriptor. v2 changes: - Move ->aborted_task() call into transport_cmd_finish_abort (Alex) Cc: Alex Leung Cc: Mark Rustad Cc: Roland Dreier Cc: Vu Pham Cc: Chris Boot Cc: Sebastian Andrzej Siewior Cc: Michael S. Tsirkin Cc: Giridhar Malavali Cc: Saurav Kashyap Cc: Quinn Tran Cc: Sagi Grimberg Cc: Or Gerlitz Signed-off-by: Nicholas Bellinger

iscsi/iser-target: Fix isert_conn->state hung shutdown issues

2014-03-05T01:54:09Z

This patch addresses a couple of different hug shutdown issues related to wait_event() + isert_conn->state. First, it changes isert_conn->conn_wait + isert_conn->conn_wait_comp_err from waitqueues to completions, and sets ISER_CONN_TERMINATING from within isert_disconnect_work(). Second, it splits isert_free_conn() into isert_wait_conn() that is called earlier in iscsit_close_connection() to ensure that all outstanding commands have completed before continuing. Finally, it breaks isert_cq_comp_err() into seperate TX / RX related code, and adds logic in isert_cq_rx_comp_err() to wait for outstanding commands to complete before setting ISER_CONN_DOWN and calling complete(&isert_conn->conn_wait_comp_err). Acked-by: Sagi Grimberg Cc: Or Gerlitz Cc: #3.10+ Signed-off-by: Nicholas Bellinger

iscsi-target: Convert gfp_t parameter to task state bitmask

2014-01-25T06:58:52Z

This patch propigates the use of task state bitmask now used by percpu_ida_alloc() up the iscsi-target callchain, replacing the use of GFP_ATOMIC for TASK_RUNNING, and GFP_KERNEL for TASK_INTERRUPTIBLE. Also, drop the unnecessary gfp_t parameter to isert_allocate_cmd(), and just pass TASK_INTERRUPTIBLE into iscsit_allocate_cmd(). Signed-off-by: Nicholas Bellinger

iscsi/iser-target: Convert to command priv_size usage

2013-09-09T21:29:21Z

This command converts iscsi/isert-target to use allocations based on iscsit_transport->priv_size within iscsit_allocate_cmd(), instead of using an embedded isert_cmd->iscsi_cmd. This includes removing iscsit_transport->alloc_cmd() usage, along with updating isert-target code to use iscsit_priv_cmd(). Also, remove left-over iscsit_transport->release_cmd() usage for direct calls to iscsit_release_cmd(), and drop the now unused lio_cmd_cache and isert_cmd_cache. Cc: Or Gerlitz Cc: Kent Overstreet Signed-off-by: Nicholas Bellinger

iser-target: Fix session reset bug with RDMA_CM_EVENT_DISCONNECTED

2013-07-08T01:35:56Z

This patch addresses a bug where RDMA_CM_EVENT_DISCONNECTED may occur before the connection shutdown has been completed by rx/tx threads, that causes isert_free_conn() to wait indefinately on ->conn_wait. This patch allows isert_disconnect_work code to invoke rdma_disconnect when isert_disconnect_work() process context is started by client session reset before isert_free_conn() code has been reached. It also adds isert_conn->conn_mutex protection for ->state within isert_disconnect_work(), isert_cq_comp_err() and isert_free_conn() code, along with isert_check_state() for wait_event usage. (v2: Add explicit iscsit_cause_connection_reinstatement call during isert_disconnect_work() to force conn reset) Cc: stable@vger.kernel.org # 3.10+ Cc: Or Gerlitz Signed-off-by: Nicholas Bellinger

iscsi-target: Fix iscsit_sequence_cmd reject handling for iser

2013-07-07T04:59:54Z

This patch moves ISCSI_OP_REJECT failures into iscsit_sequence_cmd() in order to avoid external iscsit_reject_cmd() reject usage for all PDU types. It also updates PDU specific handlers for traditional iscsi-target code to not reset the session after posting a ISCSI_OP_REJECT during setup. (v2: Fix CMDSN_LOWER_THAN_EXP for ISCSI_OP_SCSI to call target_put_sess_cmd() after iscsit_sequence_cmd() failure) Cc: Or Gerlitz Cc: Mike Christie Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger

iscsi-target: Fix iscsit_add_reject* usage for iser

2013-07-07T04:59:53Z

This patch changes iscsit_add_reject() + iscsit_add_reject_from_cmd() usage to not sleep on iscsi_cmd->reject_comp to address a free-after-use usage bug in v3.10 with iser-target code. It saves ->reject_reason for use within iscsit_build_reject() so the correct value for both transport cases. It also drops the legacy fail_conn parameter usage throughput iscsi-target code and adds two iscsit_add_reject_cmd() and iscsit_reject_cmd helper functions, along with various small cleanups. (v2: Re-enable target_put_sess_cmd() to be called from iscsit_add_reject_from_cmd() for rejects invoked after target_get_sess_cmd() has been called) Cc: Or Gerlitz Cc: Mike Christie Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger

iscsi-target: Refactor ISCSI_OP_TEXT_RSP TX handling

2013-06-26T07:33:32Z

This patch refactoring existing iscsit_send_text_rsp() in order to handle iscsi_text_rsp payloads in a transport specific manner. This includes the addition of iscsit_build_text_rsp() to build the response payload and initialize ISCSI_OP_TEXT_RSP. v2: Make iscsit_build_text_rsp() determine extra padding bytes, and drop legacy padding calculation for traditional iSCSI text responses within iscsit_send_text_rsp() Reported-by: Or Gerlitz Cc: Or Gerlitz Cc: Mike Christie Signed-off-by: Nicholas Bellinger