linux/include/media, branch v3.9

[media] media: ov7670: Add possibility to disable pixclk during hblank

2013-02-08T16:35:06Z

Some bridge drivers capture pixels during blanking periods if pixclk is enabled. In order to avoid capturing bogus data we need to disable pixclk in the sensor during those blanking periods. Acked-by: Jonathan Corbet Signed-off-by: Javier Martin Signed-off-by: Mauro Carvalho Chehab

[media] media: ov7670: add possibility to bypass pll for ov7675

2013-02-08T16:30:48Z

For a frame rate of 30 fps a pixclk of 24MHz is needed. For those cases where the ov7670 has a clean 24MHz input (xvclk) the PLL can be bypassed. This will result in a value of clkrc of 1, which means that in practice pixclk = xvclk (input clock) Acked-by: Jonathan Corbet Signed-off-by: Javier Martin Signed-off-by: Mauro Carvalho Chehab

[media] blackfin: add error frame support

2013-02-06T11:16:58Z

Mark current frame as error frame when ppi error interrupt report fifo error. Member next_frm in struct bcap_device can be optimized out. Signed-off-by: Scott Jiang Signed-off-by: Mauro Carvalho Chehab

[media] media: tvp514x: remove field description

2013-02-06T10:18:49Z

This patch removes the field description of fields that no longer exists, along side aligns the field description of fields. Signed-off-by: Lad, Prabhakar Acked-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

[media] media: adv7343: accept configuration through platform data

2013-02-05T20:45:47Z

The current code was implemented with some default configurations, this default configuration works on board and doesn't work on other. This patch accepts the configuration through platform data and configures the encoder depending on the data passed. Signed-off-by: Lad, Prabhakar Acked-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

[media] s5p-fimc: Redefine platform data structure for fimc-is

2013-02-05T19:55:58Z

Newer Exynos4 SoC are equipped with a local camera ISP that controls external raw image sensor directly. Such sensors can be connected through FIMC-LITEn (and MIPI-CSISn) IPs to the ISP, which then feeds image data to the FIMCn IP. Thus there can be two busses associated with an image source (sensor). Rename struct s5p_fimc_isp_info describing external image sensor (video decoder) to struct fimc_source_info to avoid confusion. bus_type is split into fimc_bus_type and sensor_bus_type. The bus type enumeration is extended to include both FIMC Writeback input types. The bus_type enumeration and the data structure name in the board files are modified according to the above changes. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Acked-by: Kukjin Kim Signed-off-by: Mauro Carvalho Chehab

[media] V4L: Add S5C73M3 camera driver

2013-02-05T19:39:04Z

Add driver for S5C73M3 image sensor. The driver exposes the sensor as two subdevs: pure sensor and output interface. Two subdev architecture supports interleaved UYVY/JPEG image format with separate frame size for both sub-formats, there is a spearate pad for each sub-format. Signed-off-by: Sylwester Nawrocki Signed-off-by: Andrzej Hajda Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab

[media] V4L: Add driver for OV9650/52 image sensors

2013-02-05T17:21:15Z

This patch adds V4L2 sub-device driver for OV9650/OV9652 image sensors. The driver exposes following V4L2 controls: - auto/manual exposure, - auto/manual white balance, - auto/manual gain, - brightness, saturation, sharpness, - horizontal/vertical flip, - color bar test pattern, - banding filter (power line frequency). Frame rate can be configured with g/s_frame_interval pad level ops. Supported resolution are only: SXGA, VGA, QVGA. Signed-off-by: Sylwester Nawrocki Signed-off-by: Mauro Carvalho Chehab

[media] V4L: Add v4l2_ctrl_subdev_log_status() helper function

2013-02-05T17:17:16Z

This patch adds a v4l2 core helper function that can be used as the log_status handler for subdevs that only need to log state of the v4l2 controls owned by the subdev's control handler. Signed-off-by: Sylwester Nawrocki Signed-off-by: Mauro Carvalho Chehab

[media] V4L: Add v4l2_ctrl_subdev_subscribe_event() helper function

2013-02-05T17:05:26Z

Add a v4l2 core helper function that can be used as the subdev .subscribe_event handler. This allows to eliminate some boilerplate from drivers that are only handling the control events. Signed-off-by: Sylwester Nawrocki Signed-off-by: Mauro Carvalho Chehab